diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro')
6 files changed, 65 insertions, 7 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c index 062a600fa5a7..21428537e231 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c @@ -333,6 +333,9 @@ static int stm32mp1_parse_data(struct stm32_dwmac *dwmac, */ dwmac->irq_pwr_wakeup = platform_get_irq_byname(pdev, "stm32_pwr_wakeup"); + if (dwmac->irq_pwr_wakeup == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (!dwmac->clk_eth_ck && dwmac->irq_pwr_wakeup >= 0) { err = device_init_wakeup(&pdev->dev, true); if (err) { diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h index 37d5e6fe7473..085b700a4994 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h @@ -143,6 +143,11 @@ #define XGMAC_RSF BIT(5) #define XGMAC_RTC GENMASK(1, 0) #define XGMAC_RTC_SHIFT 0 +#define XGMAC_MTL_RXQ_FLOW_CONTROL(x) (0x00001150 + (0x80 * (x))) +#define XGMAC_RFD GENMASK(31, 17) +#define XGMAC_RFD_SHIFT 17 +#define XGMAC_RFA GENMASK(15, 1) +#define XGMAC_RFA_SHIFT 1 #define XGMAC_MTL_QINTEN(x) (0x00001170 + (0x80 * (x))) #define XGMAC_RXOIE BIT(16) #define XGMAC_MTL_QINT_STATUS(x) (0x00001174 + (0x80 * (x))) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c index 2ba712b48a89..e79037f511e1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c @@ -147,6 +147,52 @@ static void dwxgmac2_dma_rx_mode(void __iomem *ioaddr, int mode, value &= ~XGMAC_RQS; value |= (rqs << XGMAC_RQS_SHIFT) & XGMAC_RQS; + if ((fifosz >= 4096) && (qmode != MTL_QUEUE_AVB)) { + u32 flow = readl(ioaddr + XGMAC_MTL_RXQ_FLOW_CONTROL(channel)); + unsigned int rfd, rfa; + + value |= XGMAC_EHFC; + + /* Set Threshold for Activating Flow Control to min 2 frames, + * i.e. 1500 * 2 = 3000 bytes. + * + * Set Threshold for Deactivating Flow Control to min 1 frame, + * i.e. 1500 bytes. + */ + switch (fifosz) { + case 4096: + /* This violates the above formula because of FIFO size + * limit therefore overflow may occur in spite of this. + */ + rfd = 0x03; /* Full-2.5K */ + rfa = 0x01; /* Full-1.5K */ + break; + + case 8192: + rfd = 0x06; /* Full-4K */ + rfa = 0x0a; /* Full-6K */ + break; + + case 16384: + rfd = 0x06; /* Full-4K */ + rfa = 0x12; /* Full-10K */ + break; + + default: + rfd = 0x06; /* Full-4K */ + rfa = 0x1e; /* Full-16K */ + break; + } + + flow &= ~XGMAC_RFD; + flow |= rfd << XGMAC_RFD_SHIFT; + + flow &= ~XGMAC_RFA; + flow |= rfa << XGMAC_RFA_SHIFT; + + writel(flow, ioaddr + XGMAC_MTL_RXQ_FLOW_CONTROL(channel)); + } + writel(value, ioaddr + XGMAC_MTL_RXQ_OPMODE(channel)); /* Enable MTL RX overflow */ diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c index b7dd4e3c760d..6d690678c20e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c @@ -140,7 +140,7 @@ static void ndesc_init_rx_desc(struct dma_desc *p, int disable_rx_ic, int mode, p->des0 |= cpu_to_le32(RDES0_OWN); bfsize1 = min(bfsize, BUF_SIZE_2KiB - 1); - p->des1 |= cpu_to_le32(bfsize & RDES1_BUFFER1_SIZE_MASK); + p->des1 |= cpu_to_le32(bfsize1 & RDES1_BUFFER1_SIZE_MASK); if (mode == STMMAC_CHAIN_MODE) ndesc_rx_set_on_chain(p, end); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index a26e36dbb5df..5678b869cbff 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -74,7 +74,7 @@ MODULE_PARM_DESC(phyaddr, "Physical device address"); #define STMMAC_TX_THRESH (DMA_TX_SIZE / 4) #define STMMAC_RX_THRESH (DMA_RX_SIZE / 4) -static int flow_ctrl = FLOW_OFF; +static int flow_ctrl = FLOW_AUTO; module_param(flow_ctrl, int, 0644); MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]"); @@ -2616,8 +2616,6 @@ static int stmmac_open(struct net_device *dev) u32 chan; int ret; - stmmac_check_ether_addr(priv); - if (priv->hw->pcs != STMMAC_PCS_RGMII && priv->hw->pcs != STMMAC_PCS_TBI && priv->hw->pcs != STMMAC_PCS_RTBI) { @@ -4264,7 +4262,7 @@ int stmmac_dvr_probe(struct device *device, priv->wol_irq = res->wol_irq; priv->lpi_irq = res->lpi_irq; - if (res->mac) + if (!IS_ERR_OR_NULL(res->mac)) memcpy(priv->dev->dev_addr, res->mac, ETH_ALEN); dev_set_drvdata(device, priv->dev); @@ -4303,6 +4301,8 @@ int stmmac_dvr_probe(struct device *device, if (ret) goto error_hw_init; + stmmac_check_ether_addr(priv); + /* Configure real RX and TX queues */ netif_set_real_num_rx_queues(ndev, priv->plat->rx_queues_to_use); netif_set_real_num_tx_queues(ndev, priv->plat->tx_queues_to_use); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index d819e8eaba12..26db6aa002d1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -159,6 +159,12 @@ static const struct dmi_system_id quark_pci_dmi[] = { }, .driver_data = (void *)&galileo_stmmac_dmi_data, }, + /* + * There are 2 types of SIMATIC IOT2000: IOT2020 and IOT2040. + * The asset tag "6ES7647-0AA00-0YA2" is only for IOT2020 which + * has only one pci network device while other asset tags are + * for IOT2040 which has two. + */ { .matches = { DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), @@ -170,8 +176,6 @@ static const struct dmi_system_id quark_pci_dmi[] = { { .matches = { DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), - DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG, - "6ES7647-0AA00-1YA2"), }, .driver_data = (void *)&iot2040_stmmac_dmi_data, }, |
