diff options
Diffstat (limited to 'drivers/net/ethernet/smsc')
| -rw-r--r-- | drivers/net/ethernet/smsc/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/smc91x.c | 20 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/smsc911x.c | 71 |
3 files changed, 74 insertions, 21 deletions
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig index 753630f5d3d3..627926800ff3 100644 --- a/drivers/net/ethernet/smsc/Kconfig +++ b/drivers/net/ethernet/smsc/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_SMSC bool "SMC (SMSC)/Western Digital devices" default y depends on ARM || ISA || MAC || ARM64 || MIPS || M32R || SUPERH || \ - BLACKFIN || MN10300 || COLDFIRE || XTENSA || PCI || PCMCIA + BLACKFIN || MN10300 || COLDFIRE || XTENSA || NIOS2 || PCI || PCMCIA ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from @@ -39,7 +39,7 @@ config SMC91X select CRC32 select MII depends on (ARM || M32R || SUPERH || MIPS || BLACKFIN || \ - MN10300 || COLDFIRE || ARM64 || XTENSA) + MN10300 || COLDFIRE || ARM64 || XTENSA || NIOS2) ---help--- This is a driver for SMC's 91x series of Ethernet chipsets, including the SMC91C94 and the SMC91C111. Say Y if you want it diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 5d77e6f50dd8..88a55f95fe09 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -2243,9 +2243,10 @@ static int smc_drv_probe(struct platform_device *pdev) const struct of_device_id *match = NULL; struct smc_local *lp; struct net_device *ndev; - struct resource *res, *ires; + struct resource *res; unsigned int __iomem *addr; unsigned long irq_flags = SMC_IRQ_FLAGS; + unsigned long irq_resflags; int ret; ndev = alloc_etherdev(sizeof(struct smc_local)); @@ -2337,16 +2338,19 @@ static int smc_drv_probe(struct platform_device *pdev) goto out_free_netdev; } - ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!ires) { + ndev->irq = platform_get_irq(pdev, 0); + if (ndev->irq <= 0) { ret = -ENODEV; goto out_release_io; } - - ndev->irq = ires->start; - - if (irq_flags == -1 || ires->flags & IRQF_TRIGGER_MASK) - irq_flags = ires->flags & IRQF_TRIGGER_MASK; + /* + * If this platform does not specify any special irqflags, or if + * the resource supplies a trigger, override the irqflags with + * the trigger flags from the resource. + */ + irq_resflags = irqd_get_trigger_type(irq_get_irq_data(ndev->irq)); + if (irq_flags == -1 || irq_resflags & IRQF_TRIGGER_MASK) + irq_flags = irq_resflags & IRQF_TRIGGER_MASK; ret = smc_request_attrib(pdev, ndev); if (ret) diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index a255be08e34f..2965c6ae7d6e 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -59,6 +59,8 @@ #include <linux/of_device.h> #include <linux/of_gpio.h> #include <linux/of_net.h> +#include <linux/pm_runtime.h> + #include "smsc911x.h" #define SMSC_CHIPNAME "smsc911x" @@ -1342,6 +1344,42 @@ static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata) spin_unlock(&pdata->mac_lock); } +static int smsc911x_phy_general_power_up(struct smsc911x_data *pdata) +{ + int rc = 0; + + if (!pdata->phy_dev) + return rc; + + /* If the internal PHY is in General Power-Down mode, all, except the + * management interface, is powered-down and stays in that condition as + * long as Phy register bit 0.11 is HIGH. + * + * In that case, clear the bit 0.11, so the PHY powers up and we can + * access to the phy registers. + */ + rc = phy_read(pdata->phy_dev, MII_BMCR); + if (rc < 0) { + SMSC_WARN(pdata, drv, "Failed reading PHY control reg"); + return rc; + } + + /* If the PHY general power-down bit is not set is not necessary to + * disable the general power down-mode. + */ + if (rc & BMCR_PDOWN) { + rc = phy_write(pdata->phy_dev, MII_BMCR, rc & ~BMCR_PDOWN); + if (rc < 0) { + SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); + return rc; + } + + usleep_range(1000, 1500); + } + + return 0; +} + static int smsc911x_phy_disable_energy_detect(struct smsc911x_data *pdata) { int rc = 0; @@ -1356,12 +1394,8 @@ static int smsc911x_phy_disable_energy_detect(struct smsc911x_data *pdata) return rc; } - /* - * If energy is detected the PHY is already awake so is not necessary - * to disable the energy detect power-down mode. - */ - if ((rc & MII_LAN83C185_EDPWRDOWN) && - !(rc & MII_LAN83C185_ENERGYON)) { + /* Only disable if energy detect mode is already enabled */ + if (rc & MII_LAN83C185_EDPWRDOWN) { /* Disable energy detect mode for this SMSC Transceivers */ rc = phy_write(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS, rc & (~MII_LAN83C185_EDPWRDOWN)); @@ -1370,8 +1404,8 @@ static int smsc911x_phy_disable_energy_detect(struct smsc911x_data *pdata) SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); return rc; } - - mdelay(1); + /* Allow PHY to wakeup */ + mdelay(2); } return 0; @@ -1393,7 +1427,6 @@ static int smsc911x_phy_enable_energy_detect(struct smsc911x_data *pdata) /* Only enable if energy detect mode is already disabled */ if (!(rc & MII_LAN83C185_EDPWRDOWN)) { - mdelay(100); /* Enable energy detect mode for this SMSC Transceivers */ rc = phy_write(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS, rc | MII_LAN83C185_EDPWRDOWN); @@ -1402,8 +1435,6 @@ static int smsc911x_phy_enable_energy_detect(struct smsc911x_data *pdata) SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); return rc; } - - mdelay(1); } return 0; } @@ -1415,6 +1446,16 @@ static int smsc911x_soft_reset(struct smsc911x_data *pdata) int ret; /* + * Make sure to power-up the PHY chip before doing a reset, otherwise + * the reset fails. + */ + ret = smsc911x_phy_general_power_up(pdata); + if (ret) { + SMSC_WARN(pdata, drv, "Failed to power-up the PHY chip"); + return ret; + } + + /* * LAN9210/LAN9211/LAN9220/LAN9221 chips have an internal PHY that * are initialized in a Energy Detect Power-Down mode that prevents * the MAC chip to be software reseted. So we have to wakeup the PHY @@ -2299,6 +2340,9 @@ static int smsc911x_drv_remove(struct platform_device *pdev) free_netdev(dev); + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + return 0; } @@ -2452,6 +2496,9 @@ static int smsc911x_drv_probe(struct platform_device *pdev) if (pdata->config.shift) pdata->ops = &shifted_smsc911x_ops; + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + retval = smsc911x_init(dev); if (retval < 0) goto out_disable_resources; @@ -2533,6 +2580,8 @@ out_unregister_netdev_5: out_free_irq: free_irq(dev->irq, dev); out_disable_resources: + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); (void)smsc911x_disable_resources(pdev); out_enable_resources_fail: smsc911x_free_resources(pdev); |
