diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igc/igc_base.c')
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_base.c | 76 |
1 files changed, 6 insertions, 70 deletions
diff --git a/drivers/net/ethernet/intel/igc/igc_base.c b/drivers/net/ethernet/intel/igc/igc_base.c index df40af759542..51a8b8769c67 100644 --- a/drivers/net/ethernet/intel/igc/igc_base.c +++ b/drivers/net/ethernet/intel/igc/igc_base.c @@ -54,22 +54,6 @@ out: } /** - * igc_check_for_link_base - Check for link - * @hw: pointer to the HW structure - * - * If sgmii is enabled, then use the pcs register to determine link, otherwise - * use the generic interface for determining link. - */ -static s32 igc_check_for_link_base(struct igc_hw *hw) -{ - s32 ret_val = 0; - - ret_val = igc_check_for_copper_link(hw); - - return ret_val; -} - -/** * igc_reset_hw_base - Reset hardware * @hw: pointer to the HW structure * @@ -124,22 +108,6 @@ static s32 igc_reset_hw_base(struct igc_hw *hw) } /** - * igc_get_phy_id_base - Retrieve PHY addr and id - * @hw: pointer to the HW structure - * - * Retrieves the PHY address and ID for both PHY's which do and do not use - * sgmi interface. - */ -static s32 igc_get_phy_id_base(struct igc_hw *hw) -{ - s32 ret_val = 0; - - ret_val = igc_get_phy_id(hw); - - return ret_val; -} - -/** * igc_init_nvm_params_base - Init NVM func ptrs. * @hw: pointer to the HW structure */ @@ -163,6 +131,7 @@ static s32 igc_init_nvm_params_base(struct igc_hw *hw) if (size > 15) size = 15; + nvm->type = igc_nvm_eeprom_spi; nvm->word_size = BIT(size); nvm->opcode_bits = 8; nvm->delay_usec = 1; @@ -261,11 +230,11 @@ static s32 igc_init_phy_params_base(struct igc_hw *hw) goto out; } - ret_val = igc_get_phy_id_base(hw); + ret_val = igc_get_phy_id(hw); if (ret_val) return ret_val; - igc_check_for_link_base(hw); + igc_check_for_copper_link(hw); /* Verify phy id and set remaining function pointers */ switch (phy->id) { @@ -350,26 +319,6 @@ static void igc_release_phy_base(struct igc_hw *hw) } /** - * igc_get_link_up_info_base - Get link speed/duplex info - * @hw: pointer to the HW structure - * @speed: stores the current speed - * @duplex: stores the current duplex - * - * This is a wrapper function, if using the serial gigabit media independent - * interface, use PCS to retrieve the link speed and duplex information. - * Otherwise, use the generic function to get the link speed and duplex info. - */ -static s32 igc_get_link_up_info_base(struct igc_hw *hw, u16 *speed, - u16 *duplex) -{ - s32 ret_val; - - ret_val = igc_get_speed_and_duplex_copper(hw, speed, duplex); - - return ret_val; -} - -/** * igc_init_hw_base - Initialize hardware * @hw: pointer to the HW structure * @@ -408,19 +357,6 @@ static s32 igc_init_hw_base(struct igc_hw *hw) } /** - * igc_read_mac_addr_base - Read device MAC address - * @hw: pointer to the HW structure - */ -static s32 igc_read_mac_addr_base(struct igc_hw *hw) -{ - s32 ret_val = 0; - - ret_val = igc_read_mac_addr(hw); - - return ret_val; -} - -/** * igc_power_down_phy_copper_base - Remove link during PHY power down * @hw: pointer to the HW structure * @@ -512,10 +448,10 @@ void igc_rx_fifo_flush_base(struct igc_hw *hw) static struct igc_mac_operations igc_mac_ops_base = { .init_hw = igc_init_hw_base, - .check_for_link = igc_check_for_link_base, + .check_for_link = igc_check_for_copper_link, .rar_set = igc_rar_set, - .read_mac_addr = igc_read_mac_addr_base, - .get_speed_and_duplex = igc_get_link_up_info_base, + .read_mac_addr = igc_read_mac_addr, + .get_speed_and_duplex = igc_get_speed_and_duplex_copper, }; static const struct igc_phy_operations igc_phy_ops_base = { |
