summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c')
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c22
1 files changed, 18 insertions, 4 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 91e2a7560b48..7b08323e3f3d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -9578,6 +9578,15 @@ static int bnx2x_init_shmem(struct bnx2x *bp)
do {
bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
+
+ /* If we read all 0xFFs, means we are in PCI error state and
+ * should bail out to avoid crashes on adapter's FW reads.
+ */
+ if (bp->common.shmem_base == 0xFFFFFFFF) {
+ bp->flags |= NO_MCP_FLAG;
+ return -ENODEV;
+ }
+
if (bp->common.shmem_base) {
val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]);
if (val & SHR_MEM_VALIDITY_MB)
@@ -12400,8 +12409,8 @@ static int bnx2x_init_bp(struct bnx2x *bp)
/* Set TPA flags */
if (bp->disable_tpa) {
- bp->dev->hw_features &= ~NETIF_F_LRO;
- bp->dev->features &= ~NETIF_F_LRO;
+ bp->dev->hw_features &= ~(NETIF_F_LRO | NETIF_F_GRO_HW);
+ bp->dev->features &= ~(NETIF_F_LRO | NETIF_F_GRO_HW);
}
if (CHIP_IS_E1(bp))
@@ -13273,7 +13282,7 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev,
dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
- NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO |
+ NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO | NETIF_F_GRO_HW |
NETIF_F_RXHASH | NETIF_F_HW_VLAN_CTAG_TX;
if (!chip_is_e1x) {
dev->hw_features |= NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM |
@@ -13309,6 +13318,8 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev,
dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX;
dev->features |= NETIF_F_HIGHDMA;
+ if (dev->features & NETIF_F_LRO)
+ dev->features &= ~NETIF_F_GRO_HW;
/* Add Loopback capability to the device */
dev->hw_features |= NETIF_F_LOOPBACK;
@@ -14320,7 +14331,10 @@ static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev)
BNX2X_ERR("IO slot reset --> driver unload\n");
/* MCP should have been reset; Need to wait for validity */
- bnx2x_init_shmem(bp);
+ if (bnx2x_init_shmem(bp)) {
+ rtnl_unlock();
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) {
u32 v;
OpenPOWER on IntegriCloud