diff options
Diffstat (limited to 'drivers/net/e1000e')
| -rw-r--r-- | drivers/net/e1000e/defines.h | 2 | ||||
| -rw-r--r-- | drivers/net/e1000e/e1000.h | 6 | ||||
| -rw-r--r-- | drivers/net/e1000e/ethtool.c | 11 | ||||
| -rw-r--r-- | drivers/net/e1000e/ich8lan.c | 78 | ||||
| -rw-r--r-- | drivers/net/e1000e/netdev.c | 257 | ||||
| -rw-r--r-- | drivers/net/e1000e/param.c | 55 |
6 files changed, 347 insertions, 62 deletions
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index f823b8ba5785..14b0e6cd3b8d 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -389,7 +389,7 @@ /* Interrupt Cause Set */ #define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ -#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ +#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ #define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ /* Transmit Descriptor Control */ diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index cf57050d99d8..5ea6b60fa377 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -257,7 +257,6 @@ struct e1000_adapter { struct net_device *netdev; struct pci_dev *pdev; struct net_device_stats net_stats; - spinlock_t stats_lock; /* prevent concurrent stats updates */ /* structs defined in e1000_hw.h */ struct e1000_hw hw; @@ -284,6 +283,8 @@ struct e1000_adapter { unsigned long led_status; unsigned int flags; + struct work_struct downshift_task; + struct work_struct update_phy_task; }; struct e1000_info { @@ -305,6 +306,7 @@ struct e1000_info { #define FLAG_HAS_CTRLEXT_ON_LOAD (1 << 5) #define FLAG_HAS_SWSM_ON_LOAD (1 << 6) #define FLAG_HAS_JUMBO_FRAMES (1 << 7) +#define FLAG_READ_ONLY_NVM (1 << 8) #define FLAG_IS_ICH (1 << 9) #define FLAG_HAS_SMART_POWER_DOWN (1 << 11) #define FLAG_IS_QUAD_PORT_A (1 << 12) @@ -326,6 +328,7 @@ struct e1000_info { #define FLAG_RX_CSUM_ENABLED (1 << 28) #define FLAG_TSO_FORCE (1 << 29) #define FLAG_RX_RESTART_NOW (1 << 30) +#define FLAG_MSI_TEST_FAILED (1 << 31) #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) @@ -384,6 +387,7 @@ extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw); extern bool e1000e_get_laa_state_82571(struct e1000_hw *hw); extern void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state); +extern void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw); extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, bool state); extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw); diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index cf9679f2b7c4..33a3ff17b5d0 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -177,7 +177,7 @@ static u32 e1000_get_link(struct net_device *netdev) u32 status; status = er32(STATUS); - return (status & E1000_STATUS_LU); + return (status & E1000_STATUS_LU) ? 1 : 0; } static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) @@ -432,6 +432,10 @@ static void e1000_get_regs(struct net_device *netdev, regs_buff[11] = er32(TIDV); regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */ + + /* ethtool doesn't use anything past this point, so all this + * code is likely legacy junk for apps that may or may not + * exist */ if (hw->phy.type == e1000_phy_m88) { e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); regs_buff[13] = (u32)phy_data; /* cable length */ @@ -447,7 +451,7 @@ static void e1000_get_regs(struct net_device *netdev, regs_buff[22] = adapter->phy_stats.receive_errors; regs_buff[23] = regs_buff[13]; /* mdix mode */ } - regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */ + regs_buff[21] = 0; /* was idle_errors */ e1e_rphy(hw, PHY_1000T_STATUS, &phy_data); regs_buff[24] = (u32)phy_data; /* phy local receiver status */ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ @@ -529,6 +533,9 @@ static int e1000_set_eeprom(struct net_device *netdev, if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16))) return -EFAULT; + if (adapter->flags & FLAG_READ_ONLY_NVM) + return -EINVAL; + max_len = hw->nvm.word_size * 2; first_word = eeprom->offset >> 1; diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 9e38452a738c..bcd2bc477af2 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -58,6 +58,7 @@ #define ICH_FLASH_HSFCTL 0x0006 #define ICH_FLASH_FADDR 0x0008 #define ICH_FLASH_FDATA0 0x0010 +#define ICH_FLASH_PR0 0x0074 #define ICH_FLASH_READ_COMMAND_TIMEOUT 500 #define ICH_FLASH_WRITE_COMMAND_TIMEOUT 500 @@ -150,6 +151,19 @@ union ich8_hws_flash_regacc { u16 regval; }; +/* ICH Flash Protected Region */ +union ich8_flash_protected_range { + struct ich8_pr { + u32 base:13; /* 0:12 Protected Range Base */ + u32 reserved1:2; /* 13:14 Reserved */ + u32 rpe:1; /* 15 Read Protection Enable */ + u32 limit:13; /* 16:28 Protected Range Limit */ + u32 reserved2:2; /* 29:30 Reserved */ + u32 wpe:1; /* 31 Write Protection Enable */ + } range; + u32 regval; +}; + static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw); static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw); @@ -366,6 +380,9 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) return 0; } +static DEFINE_MUTEX(nvm_mutex); +static pid_t nvm_owner = -1; + /** * e1000_acquire_swflag_ich8lan - Acquire software control flag * @hw: pointer to the HW structure @@ -379,6 +396,15 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) u32 extcnf_ctrl; u32 timeout = PHY_CFG_TIMEOUT; + might_sleep(); + + if (!mutex_trylock(&nvm_mutex)) { + WARN(1, KERN_ERR "e1000e mutex contention. Owned by pid %d\n", + nvm_owner); + mutex_lock(&nvm_mutex); + } + nvm_owner = current->pid; + while (timeout) { extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; @@ -393,6 +419,8 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) if (!timeout) { hw_dbg(hw, "FW or HW has locked the resource for too long.\n"); + nvm_owner = -1; + mutex_unlock(&nvm_mutex); return -E1000_ERR_CONFIG; } @@ -414,6 +442,9 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); + + nvm_owner = -1; + mutex_unlock(&nvm_mutex); } /** @@ -1284,6 +1315,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) * programming failed. */ if (ret_val) { + /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */ hw_dbg(hw, "Flash commit failed.\n"); e1000_release_swflag_ich8lan(hw); return ret_val; @@ -1374,6 +1406,49 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) } /** + * e1000e_write_protect_nvm_ich8lan - Make the NVM read-only + * @hw: pointer to the HW structure + * + * To prevent malicious write/erase of the NVM, set it to be read-only + * so that the hardware ignores all write/erase cycles of the NVM via + * the flash control registers. The shadow-ram copy of the NVM will + * still be updated, however any updates to this copy will not stick + * across driver reloads. + **/ +void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) +{ + union ich8_flash_protected_range pr0; + union ich8_hws_flash_status hsfsts; + u32 gfpreg; + s32 ret_val; + + ret_val = e1000_acquire_swflag_ich8lan(hw); + if (ret_val) + return; + + gfpreg = er32flash(ICH_FLASH_GFPREG); + + /* Write-protect GbE Sector of NVM */ + pr0.regval = er32flash(ICH_FLASH_PR0); + pr0.range.base = gfpreg & FLASH_GFPREG_BASE_MASK; + pr0.range.limit = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK); + pr0.range.wpe = true; + ew32flash(ICH_FLASH_PR0, pr0.regval); + + /* + * Lock down a subset of GbE Flash Control Registers, e.g. + * PR0 to prevent the write-protection from being lifted. + * Once FLOCKDN is set, the registers protected by it cannot + * be written until FLOCKDN is cleared by a hardware reset. + */ + hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); + hsfsts.hsf_status.flockdn = true; + ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval); + + e1000_release_swflag_ich8lan(hw); +} + +/** * e1000_write_flash_data_ich8lan - Writes bytes to the NVM * @hw: pointer to the HW structure * @offset: The offset (in bytes) of the byte/word to read. @@ -1720,6 +1795,9 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(20); + /* release the swflag because it is not reset by hardware reset */ + e1000_release_swflag_ich8lan(hw); + ret_val = e1000e_get_auto_rd_done(hw); if (ret_val) { /* diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 05b0b2f9c54b..b81c4237b5d3 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -47,7 +47,7 @@ #include "e1000.h" -#define DRV_VERSION "0.3.3.3-k2" +#define DRV_VERSION "0.3.3.3-k6" char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; @@ -510,9 +510,12 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, netdev_alloc_skb(netdev, length + NET_IP_ALIGN); if (new_skb) { skb_reserve(new_skb, NET_IP_ALIGN); - memcpy(new_skb->data - NET_IP_ALIGN, - skb->data - NET_IP_ALIGN, - length + NET_IP_ALIGN); + skb_copy_to_linear_data_offset(new_skb, + -NET_IP_ALIGN, + (skb->data - + NET_IP_ALIGN), + (length + + NET_IP_ALIGN)); /* save the skb in buffer_info as good */ buffer_info->skb = skb; skb = new_skb; @@ -1112,6 +1115,14 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter) writel(0, adapter->hw.hw_addr + rx_ring->tail); } +static void e1000e_downshift_workaround(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, downshift_task); + + e1000e_gig_downshift_workaround_ich8lan(&adapter->hw); +} + /** * e1000_intr_msi - Interrupt Handler * @irq: interrupt number @@ -1136,7 +1147,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) - e1000e_gig_downshift_workaround_ich8lan(hw); + schedule_work(&adapter->downshift_task); /* * 80003ES2LAN workaround-- For packet buffer work-around on @@ -1202,7 +1213,7 @@ static irqreturn_t e1000_intr(int irq, void *data) */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) - e1000e_gig_downshift_workaround_ich8lan(hw); + schedule_work(&adapter->downshift_task); /* * 80003ES2LAN workaround-- @@ -1233,26 +1244,36 @@ static irqreturn_t e1000_intr(int irq, void *data) return IRQ_HANDLED; } +/** + * e1000_request_irq - initialize interrupts + * + * Attempts to configure interrupts using the best available + * capabilities of the hardware and kernel. + **/ static int e1000_request_irq(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; - irq_handler_t handler = e1000_intr; int irq_flags = IRQF_SHARED; int err; - if (!pci_enable_msi(adapter->pdev)) { - adapter->flags |= FLAG_MSI_ENABLED; - handler = e1000_intr_msi; - irq_flags = 0; + if (!(adapter->flags & FLAG_MSI_TEST_FAILED)) { + err = pci_enable_msi(adapter->pdev); + if (!err) { + adapter->flags |= FLAG_MSI_ENABLED; + irq_flags = 0; + } } - err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name, - netdev); + err = request_irq(adapter->pdev->irq, + ((adapter->flags & FLAG_MSI_ENABLED) ? + &e1000_intr_msi : &e1000_intr), + irq_flags, netdev->name, netdev); if (err) { - e_err("Unable to allocate %s interrupt (return: %d)\n", - adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx", err); - if (adapter->flags & FLAG_MSI_ENABLED) + if (adapter->flags & FLAG_MSI_ENABLED) { pci_disable_msi(adapter->pdev); + adapter->flags &= ~FLAG_MSI_ENABLED; + } + e_err("Unable to allocate interrupt, Error: %d\n", err); } return err; @@ -2579,8 +2600,6 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) /* Explicitly disable IRQ since the NIC can be in any state. */ e1000_irq_disable(adapter); - spin_lock_init(&adapter->stats_lock); - set_bit(__E1000_DOWN, &adapter->state); return 0; @@ -2592,6 +2611,135 @@ err: } /** + * e1000_intr_msi_test - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + **/ +static irqreturn_t e1000_intr_msi_test(int irq, void *data) +{ + struct net_device *netdev = data; + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 icr = er32(ICR); + + e_dbg("%s: icr is %08X\n", netdev->name, icr); + if (icr & E1000_ICR_RXSEQ) { + adapter->flags &= ~FLAG_MSI_TEST_FAILED; + wmb(); + } + + return IRQ_HANDLED; +} + +/** + * e1000_test_msi_interrupt - Returns 0 for successful test + * @adapter: board private struct + * + * code flow taken from tg3.c + **/ +static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; + int err; + + /* poll_enable hasn't been called yet, so don't need disable */ + /* clear any pending events */ + er32(ICR); + + /* free the real vector and request a test handler */ + e1000_free_irq(adapter); + + /* Assume that the test fails, if it succeeds then the test + * MSI irq handler will unset this flag */ + adapter->flags |= FLAG_MSI_TEST_FAILED; + + err = pci_enable_msi(adapter->pdev); + if (err) + goto msi_test_failed; + + err = request_irq(adapter->pdev->irq, &e1000_intr_msi_test, 0, + netdev->name, netdev); + if (err) { + pci_disable_msi(adapter->pdev); + goto msi_test_failed; + } + + wmb(); + + e1000_irq_enable(adapter); + + /* fire an unusual interrupt on the test handler */ + ew32(ICS, E1000_ICS_RXSEQ); + e1e_flush(); + msleep(50); + + e1000_irq_disable(adapter); + + rmb(); + + if (adapter->flags & FLAG_MSI_TEST_FAILED) { + err = -EIO; + e_info("MSI interrupt test failed!\n"); + } + + free_irq(adapter->pdev->irq, netdev); + pci_disable_msi(adapter->pdev); + + if (err == -EIO) + goto msi_test_failed; + + /* okay so the test worked, restore settings */ + e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name); +msi_test_failed: + /* restore the original vector, even if it failed */ + e1000_request_irq(adapter); + return err; +} + +/** + * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored + * @adapter: board private struct + * + * code flow taken from tg3.c, called with e1000 interrupts disabled. + **/ +static int e1000_test_msi(struct e1000_adapter *adapter) +{ + int err; + u16 pci_cmd; + + if (!(adapter->flags & FLAG_MSI_ENABLED)) + return 0; + + /* disable SERR in case the MSI write causes a master abort */ + pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd); + pci_write_config_word(adapter->pdev, PCI_COMMAND, + pci_cmd & ~PCI_COMMAND_SERR); + + err = e1000_test_msi_interrupt(adapter); + + /* restore previous setting of command word */ + pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd); + + /* success ! */ + if (!err) + return 0; + + /* EIO means MSI test failed */ + if (err != -EIO) + return err; + + /* back to INTx mode */ + e_warn("MSI interrupt test failed, using legacy interrupt.\n"); + + e1000_free_irq(adapter); + + err = e1000_request_irq(adapter); + + return err; +} + +/** * e1000_open - Called when a network interface is made active * @netdev: network interface device structure * @@ -2649,6 +2797,19 @@ static int e1000_open(struct net_device *netdev) if (err) goto err_req_irq; + /* + * Work around PCIe errata with MSI interrupts causing some chipsets to + * ignore e1000e MSI messages, which means we need to test our MSI + * interrupt now + */ + { + err = e1000_test_msi(adapter); + if (err) { + e_err("Interrupt allocation failed\n"); + goto err_req_irq; + } + } + /* From here on the code is the same as e1000e_up() */ clear_bit(__E1000_DOWN, &adapter->state); @@ -2757,6 +2918,21 @@ static int e1000_set_mac(struct net_device *netdev, void *p) return 0; } +/** + * e1000e_update_phy_task - work thread to update phy + * @work: pointer to our work struct + * + * this worker thread exists because we must acquire a + * semaphore to read the phy, which we could msleep while + * waiting for it, and we can't msleep in a timer. + **/ +static void e1000e_update_phy_task(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, update_phy_task); + e1000_get_phy_info(&adapter->hw); +} + /* * Need to wait a few seconds after link up to get diagnostic information from * the phy @@ -2764,7 +2940,7 @@ static int e1000_set_mac(struct net_device *netdev, void *p) static void e1000_update_phy_info(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *) data; - e1000_get_phy_info(&adapter->hw); + schedule_work(&adapter->update_phy_task); } /** @@ -2775,10 +2951,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; - unsigned long irq_flags; - u16 phy_tmp; - -#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF /* * Prevent stats update while adapter is being reset, or if the pci @@ -2789,14 +2961,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) if (pci_channel_offline(pdev)) return; - spin_lock_irqsave(&adapter->stats_lock, irq_flags); - - /* - * these counters are modified from e1000_adjust_tbi_stats, - * called from the interrupt context, so they must only - * be written while holding adapter->stats_lock - */ - adapter->stats.crcerrs += er32(CRCERRS); adapter->stats.gprc += er32(GPRC); adapter->stats.gorc += er32(GORCL); @@ -2867,21 +3031,10 @@ void e1000e_update_stats(struct e1000_adapter *adapter) /* Tx Dropped needs to be maintained elsewhere */ - /* Phy Stats */ - if (hw->phy.media_type == e1000_media_type_copper) { - if ((adapter->link_speed == SPEED_1000) && - (!e1e_rphy(hw, PHY_1000T_STATUS, &phy_tmp))) { - phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK; - adapter->phy_stats.idle_errors += phy_tmp; - } - } - /* Management Stats */ adapter->stats.mgptc += er32(MGTPTC); adapter->stats.mgprc += er32(MGTPRC); adapter->stats.mgpdc += er32(MGTPDC); - - spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); } /** @@ -2893,10 +3046,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct e1000_phy_regs *phy = &adapter->phy_regs; int ret_val; - unsigned long irq_flags; - - - spin_lock_irqsave(&adapter->stats_lock, irq_flags); if ((er32(STATUS) & E1000_STATUS_LU) && (adapter->hw.phy.media_type == e1000_media_type_copper)) { @@ -2927,8 +3076,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) phy->stat1000 = 0; phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF); } - - spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); } static void e1000_print_link_info(struct e1000_adapter *adapter) @@ -3055,7 +3202,7 @@ static void e1000_watchdog_task(struct work_struct *work) case SPEED_10: txb2b = 0; netdev->tx_queue_len = 10; - adapter->tx_timeout_factor = 14; + adapter->tx_timeout_factor = 16; break; case SPEED_100: txb2b = 0; @@ -3721,7 +3868,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) struct e1000_adapter *adapter = netdev_priv(netdev); int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; - if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || + if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { e_err("Invalid MTU setting\n"); return -EINVAL; @@ -4312,6 +4459,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->bd_number = cards_found++; + e1000e_check_options(adapter); + /* setup adapter struct */ err = e1000_sw_init(adapter); if (err) @@ -4327,6 +4476,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (err) goto err_hw_init; + if ((adapter->flags & FLAG_IS_ICH) && + (adapter->flags & FLAG_READ_ONLY_NVM)) + e1000e_write_protect_nvm_ich8lan(&adapter->hw); + hw->mac.ops.get_bus_info(&adapter->hw); adapter->hw.phy.autoneg_wait_to_complete = 0; @@ -4417,8 +4570,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, INIT_WORK(&adapter->reset_task, e1000_reset_task); INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); - - e1000e_check_options(adapter); + INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround); + INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task); /* Initialize link parameters. User can change them with ethtool */ adapter->hw.mac.autoneg = 1; diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index 8effc3107f9a..d91dbf7ba434 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -133,6 +133,15 @@ E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); */ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); +/* + * Write Protect NVM + * + * Valid Range: 0, 1 + * + * Default Value: 1 (enabled) + */ +E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]"); + struct e1000_option { enum { enable_option, range_option, list_option } type; const char *name; @@ -324,14 +333,27 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) adapter->itr = 20000; break; default: - e1000_validate_option(&adapter->itr, &opt, - adapter); /* - * save the setting, because the dynamic bits - * change itr. clear the lower two bits - * because they are used as control + * Save the setting, because the dynamic bits + * change itr. */ - adapter->itr_setting = adapter->itr & ~3; + if (e1000_validate_option(&adapter->itr, &opt, + adapter) && + (adapter->itr == 3)) { + /* + * In case of invalid user value, + * default to conservative mode. + */ + adapter->itr_setting = adapter->itr; + adapter->itr = 20000; + } else { + /* + * Clear the lower two bits because + * they are used as control. + */ + adapter->itr_setting = + adapter->itr & ~3; + } break; } } else { @@ -375,4 +397,25 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) opt.def); } } + { /* Write-protect NVM */ + const struct e1000_option opt = { + .type = enable_option, + .name = "Write-protect NVM", + .err = "defaulting to Enabled", + .def = OPTION_ENABLED + }; + + if (adapter->flags & FLAG_IS_ICH) { + if (num_WriteProtectNVM > bd) { + unsigned int write_protect_nvm = WriteProtectNVM[bd]; + e1000_validate_option(&write_protect_nvm, &opt, + adapter); + if (write_protect_nvm) + adapter->flags |= FLAG_READ_ONLY_NVM; + } else { + if (opt.def) + adapter->flags |= FLAG_READ_ONLY_NVM; + } + } + } } |
