summaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x/bnx2x_link.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.c')
-rw-r--r--drivers/net/bnx2x/bnx2x_link.c173
1 files changed, 139 insertions, 34 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 43b0de24f391..7160ec51093e 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -1573,7 +1573,7 @@ static void bnx2x_set_aer_mmd_xgxs(struct link_params *params,
offset = phy->addr + ser_lane;
if (CHIP_IS_E2(bp))
- aer_val = 0x2800 + offset - 1;
+ aer_val = 0x3800 + offset - 1;
else
aer_val = 0x3800 + offset;
CL45_WR_OVER_CL22(bp, phy,
@@ -3166,7 +3166,23 @@ u8 bnx2x_set_led(struct link_params *params,
if (!vars->link_up)
break;
case LED_MODE_ON:
- if (SINGLE_MEDIA_DIRECT(params)) {
+ if (params->phy[EXT_PHY1].type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727 &&
+ CHIP_IS_E2(bp) && params->num_phys == 2) {
+ /**
+ * This is a work-around for E2+8727 Configurations
+ */
+ if (mode == LED_MODE_ON ||
+ speed == SPEED_10000){
+ REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
+ REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1);
+
+ tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+ EMAC_WR(bp, EMAC_REG_EMAC_LED,
+ (tmp | EMAC_LED_OVERRIDE));
+ return rc;
+ }
+ } else if (SINGLE_MEDIA_DIRECT(params)) {
/**
* This is a work-around for HW issue found when link
* is up in CL73
@@ -3854,11 +3870,14 @@ static void bnx2x_8073_resolve_fc(struct bnx2x_phy *phy,
pause_result);
}
}
-
-static void bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp,
+static u8 bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp,
struct bnx2x_phy *phy,
u8 port)
{
+ u32 count = 0;
+ u16 fw_ver1, fw_msgout;
+ u8 rc = 0;
+
/* Boot port from external ROM */
/* EDC grst */
bnx2x_cl45_write(bp, phy,
@@ -3888,14 +3907,45 @@ static void bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp,
MDIO_PMA_REG_GEN_CTRL,
MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
- /* wait for 120ms for code download via SPI port */
- msleep(120);
+ /* Delay 100ms per the PHY specifications */
+ msleep(100);
+
+ /* 8073 sometimes taking longer to download */
+ do {
+ count++;
+ if (count > 300) {
+ DP(NETIF_MSG_LINK,
+ "bnx2x_8073_8727_external_rom_boot port %x:"
+ "Download failed. fw version = 0x%x\n",
+ port, fw_ver1);
+ rc = -EINVAL;
+ break;
+ }
+
+ bnx2x_cl45_read(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_ROM_VER1, &fw_ver1);
+ bnx2x_cl45_read(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_M8051_MSGOUT_REG, &fw_msgout);
+
+ msleep(1);
+ } while (fw_ver1 == 0 || fw_ver1 == 0x4321 ||
+ ((fw_msgout & 0xff) != 0x03 && (phy->type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073)));
/* Clear ser_boot_ctl bit */
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_MISC_CTRL1, 0x0000);
bnx2x_save_bcm_spirom_ver(bp, phy, port);
+
+ DP(NETIF_MSG_LINK,
+ "bnx2x_8073_8727_external_rom_boot port %x:"
+ "Download complete. fw version = 0x%x\n",
+ port, fw_ver1);
+
+ return rc;
}
static void bnx2x_8073_set_xaui_low_power_mode(struct bnx2x *bp,
@@ -4108,6 +4158,25 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1);
+ /**
+ * If this is forced speed, set to KR or KX (all other are not
+ * supported)
+ */
+ /* Swap polarity if required - Must be done only in non-1G mode */
+ if (params->lane_config & PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) {
+ /* Configure the 8073 to swap _P and _N of the KR lines */
+ DP(NETIF_MSG_LINK, "Swapping polarity for the 8073\n");
+ /* 10G Rx/Tx and 1G Tx signal polarity swap */
+ bnx2x_cl45_read(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL, &val);
+ bnx2x_cl45_write(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL,
+ (val | (3<<9)));
+ }
+
+
/* Enable CL37 BAM */
if (REG_RD(bp, params->shmem_base +
offsetof(struct shmem_region, dev_info.
@@ -4314,8 +4383,32 @@ static u8 bnx2x_8073_read_status(struct bnx2x_phy *phy,
}
if (link_up) {
+ /* Swap polarity if required */
+ if (params->lane_config &
+ PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) {
+ /* Configure the 8073 to swap P and N of the KR lines */
+ bnx2x_cl45_read(bp, phy,
+ MDIO_XS_DEVAD,
+ MDIO_XS_REG_8073_RX_CTRL_PCIE, &val1);
+ /**
+ * Set bit 3 to invert Rx in 1G mode and clear this bit
+ * when it`s in 10G mode.
+ */
+ if (vars->line_speed == SPEED_1000) {
+ DP(NETIF_MSG_LINK, "Swapping 1G polarity for"
+ "the 8073\n");
+ val1 |= (1<<3);
+ } else
+ val1 &= ~(1<<3);
+
+ bnx2x_cl45_write(bp, phy,
+ MDIO_XS_DEVAD,
+ MDIO_XS_REG_8073_RX_CTRL_PCIE,
+ val1);
+ }
bnx2x_ext_phy_10G_an_resolve(bp, phy, vars);
bnx2x_8073_resolve_fc(phy, params, vars);
+ vars->duplex = DUPLEX_FULL;
}
return link_up;
}
@@ -5062,6 +5155,7 @@ static u8 bnx2x_8706_8726_read_status(struct bnx2x_phy *phy,
else
vars->line_speed = SPEED_10000;
bnx2x_ext_phy_resolve_fc(phy, params, vars);
+ vars->duplex = DUPLEX_FULL;
}
return link_up;
}
@@ -5758,8 +5852,11 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "port %x: External link is down\n",
params->port);
}
- if (link_up)
+ if (link_up) {
bnx2x_ext_phy_resolve_fc(phy, params, vars);
+ vars->duplex = DUPLEX_FULL;
+ DP(NETIF_MSG_LINK, "duplex = 0x%x\n", vars->duplex);
+ }
if ((DUAL_MEDIA(params)) &&
(phy->req_line_speed == SPEED_1000)) {
@@ -5875,10 +5972,26 @@ static void bnx2x_848xx_set_led(struct bnx2x *bp,
MDIO_PMA_REG_8481_LED2_MASK,
0x18);
+ /* Select activity source by Tx and Rx, as suggested by PHY AE */
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8481_LED3_MASK,
- 0x0040);
+ 0x0006);
+
+ /* Select the closest activity blink rate to that in 10/100/1000 */
+ bnx2x_cl45_write(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LED3_BLINK,
+ 0);
+
+ bnx2x_cl45_read(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_84823_CTL_LED_CTL_1, &val);
+ val |= MDIO_PMA_REG_84823_LED3_STRETCH_EN; /* stretch_en for LED3*/
+
+ bnx2x_cl45_write(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_84823_CTL_LED_CTL_1, val);
/* 'Interrupt Mask' */
bnx2x_cl45_write(bp, phy,
@@ -6126,6 +6239,7 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy,
/* Check link 10G */
if (val2 & (1<<11)) {
vars->line_speed = SPEED_10000;
+ vars->duplex = DUPLEX_FULL;
link_up = 1;
bnx2x_ext_phy_10G_an_resolve(bp, phy, vars);
} else { /* Check Legacy speed link */
@@ -6489,6 +6603,7 @@ static u8 bnx2x_7101_read_status(struct bnx2x_phy *phy,
MDIO_AN_DEVAD, MDIO_AN_REG_MASTER_STATUS,
&val2);
vars->line_speed = SPEED_10000;
+ vars->duplex = DUPLEX_FULL;
DP(NETIF_MSG_LINK, "SFX7101 AN status 0x%x->Master=%x\n",
val2, (val2 & (1<<14)));
bnx2x_ext_phy_10G_an_resolve(bp, phy, vars);
@@ -7663,7 +7778,6 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp,
/* PART2 - Download firmware to both phys */
for (port = PORT_MAX - 1; port >= PORT_0; port--) {
- u16 fw_ver1;
if (CHIP_IS_E2(bp))
port_of_path = 0;
else
@@ -7671,19 +7785,9 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp,
DP(NETIF_MSG_LINK, "Loading spirom for phy address 0x%x\n",
phy_blk[port]->addr);
- bnx2x_8073_8727_external_rom_boot(bp, phy_blk[port],
- port_of_path);
-
- bnx2x_cl45_read(bp, phy_blk[port],
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_ROM_VER1, &fw_ver1);
- if (fw_ver1 == 0 || fw_ver1 == 0x4321) {
- DP(NETIF_MSG_LINK,
- "bnx2x_8073_common_init_phy port %x:"
- "Download failed. fw version = 0x%x\n",
- port, fw_ver1);
+ if (bnx2x_8073_8727_external_rom_boot(bp, phy_blk[port],
+ port_of_path))
return -EINVAL;
- }
/* Only set bit 10 = 1 (Tx power down) */
bnx2x_cl45_read(bp, phy_blk[port],
@@ -7848,27 +7952,17 @@ static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp,
}
/* PART2 - Download firmware to both phys */
for (port = PORT_MAX - 1; port >= PORT_0; port--) {
- u16 fw_ver1;
if (CHIP_IS_E2(bp))
port_of_path = 0;
else
port_of_path = port;
DP(NETIF_MSG_LINK, "Loading spirom for phy address 0x%x\n",
phy_blk[port]->addr);
- bnx2x_8073_8727_external_rom_boot(bp, phy_blk[port],
- port_of_path);
- bnx2x_cl45_read(bp, phy_blk[port],
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_ROM_VER1, &fw_ver1);
- if (fw_ver1 == 0 || fw_ver1 == 0x4321) {
- DP(NETIF_MSG_LINK,
- "bnx2x_8727_common_init_phy port %x:"
- "Download failed. fw version = 0x%x\n",
- port, fw_ver1);
+ if (bnx2x_8073_8727_external_rom_boot(bp, phy_blk[port],
+ port_of_path))
return -EINVAL;
- }
- }
+ }
return 0;
}
@@ -7916,6 +8010,7 @@ u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[],
u32 shmem2_base_path[], u32 chip_id)
{
u8 rc = 0;
+ u32 phy_ver;
u8 phy_index;
u32 ext_phy_type, ext_phy_config;
DP(NETIF_MSG_LINK, "Begin common phy init\n");
@@ -7923,6 +8018,16 @@ u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[],
if (CHIP_REV_IS_EMUL(bp))
return 0;
+ /* Check if common init was already done */
+ phy_ver = REG_RD(bp, shmem_base_path[0] +
+ offsetof(struct shmem_region,
+ port_mb[PORT_0].ext_phy_fw_version));
+ if (phy_ver) {
+ DP(NETIF_MSG_LINK, "Not doing common init; phy ver is 0x%x\n",
+ phy_ver);
+ return 0;
+ }
+
/* Read the ext_phy_type for arbitrary port(0) */
for (phy_index = EXT_PHY1; phy_index < MAX_PHYS;
phy_index++) {
OpenPOWER on IntegriCloud