summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/omap2.c92
1 files changed, 91 insertions, 1 deletions
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index d7f681d0c9b9..2912d6c93635 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -9,6 +9,7 @@
*/
#include <linux/platform_device.h>
+#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/module.h>
@@ -18,6 +19,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/omap-dma.h>
#include <linux/io.h>
#include <linux/slab.h>
@@ -123,6 +125,7 @@ struct omap_nand_info {
int gpmc_cs;
unsigned long phys_base;
struct completion comp;
+ struct dma_chan *dma;
int dma_ch;
int gpmc_irq;
enum {
@@ -345,6 +348,10 @@ static void omap_nand_dma_cb(int lch, u16 ch_status, void *data)
{
complete((struct completion *) data);
}
+static void omap_nand_dma_callback(void *data)
+{
+ complete((struct completion *) data);
+}
/*
* omap_nand_dma_transfer: configer and start dma transfer
@@ -382,6 +389,56 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
addr = page_address(p1) + ((size_t)addr & ~PAGE_MASK);
}
+ if (info->dma) {
+ struct dma_async_tx_descriptor *tx;
+ struct scatterlist sg;
+ unsigned n;
+
+ sg_init_one(&sg, addr, len);
+ n = dma_map_sg(info->dma->device->dev, &sg, 1, dir);
+ if (n == 0) {
+ dev_err(&info->pdev->dev,
+ "Couldn't DMA map a %d byte buffer\n", len);
+ goto out_copy;
+ }
+
+ tx = dmaengine_prep_slave_sg(info->dma, &sg, n,
+ is_write ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!tx) {
+ dma_unmap_sg(info->dma->device->dev, &sg, 1, dir);
+ goto out_copy;
+ }
+ tx->callback = omap_nand_dma_callback;
+ tx->callback_param = &info->comp;
+ dmaengine_submit(tx);
+
+ /* configure and start prefetch transfer */
+ ret = gpmc_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write);
+ if (ret) {
+ /* PFPW engine is busy, use cpu copy method */
+ dma_unmap_sg(info->dma->device->dev, &sg, 1, dir);
+ goto out_copy;
+ }
+
+ init_completion(&info->comp);
+ dma_async_issue_pending(info->dma);
+
+ /* setup and start DMA using dma_addr */
+ wait_for_completion(&info->comp);
+ tim = 0;
+ limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+ while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+ cpu_relax();
+
+ /* disable and stop the PFPW engine */
+ gpmc_prefetch_reset(info->gpmc_cs);
+
+ dma_unmap_sg(info->dma->device->dev, &sg, 1, dir);
+ return 0;
+ }
+
dma_addr = dma_map_single(&info->pdev->dev, addr, len, dir);
if (dma_mapping_error(&info->pdev->dev, dma_addr)) {
dev_err(&info->pdev->dev,
@@ -414,7 +471,6 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
goto out_copy_unmap;
init_completion(&info->comp);
-
omap_start_dma(info->dma_ch);
/* setup and start DMA using dma_addr */
@@ -1164,6 +1220,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
struct omap_nand_platform_data *pdata;
int err;
int i, offset;
+ dma_cap_mask_t mask;
+ unsigned sig;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
@@ -1244,6 +1302,33 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
break;
case NAND_OMAP_PREFETCH_DMA:
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ sig = OMAP24XX_DMA_GPMC;
+ info->dma = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+ if (!info->dma) {
+ dev_warn(&pdev->dev, "DMA engine request failed\n");
+ } else {
+ struct dma_slave_config cfg;
+ int rc;
+
+ memset(&cfg, 0, sizeof(cfg));
+ cfg.src_addr = info->phys_base;
+ cfg.dst_addr = info->phys_base;
+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ cfg.src_maxburst = 16;
+ cfg.dst_maxburst = 16;
+ rc = dmaengine_slave_config(info->dma, &cfg);
+ if (rc) {
+ dev_err(&pdev->dev, "DMA engine slave config failed: %d\n",
+ rc);
+ goto out_release_mem_region;
+ }
+ info->nand.read_buf = omap_read_buf_dma_pref;
+ info->nand.write_buf = omap_write_buf_dma_pref;
+ break;
+ }
err = omap_request_dma(OMAP24XX_DMA_GPMC, "NAND",
omap_nand_dma_cb, &info->comp, &info->dma_ch);
if (err < 0) {
@@ -1358,6 +1443,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
return 0;
out_release_mem_region:
+ if (info->dma)
+ dma_release_channel(info->dma);
release_mem_region(info->phys_base, NAND_IO_SIZE);
out_free_info:
kfree(info);
@@ -1376,6 +1463,9 @@ static int omap_nand_remove(struct platform_device *pdev)
if (info->dma_ch != -1)
omap_free_dma(info->dma_ch);
+ if (info->dma)
+ dma_release_channel(info->dma);
+
if (info->gpmc_irq)
free_irq(info->gpmc_irq, info);
OpenPOWER on IntegriCloud