summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/maps/l440gx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/maps/l440gx.c')
-rw-r--r--drivers/mtd/maps/l440gx.c18
1 files changed, 9 insertions, 9 deletions
diff --git a/drivers/mtd/maps/l440gx.c b/drivers/mtd/maps/l440gx.c
index b08668212ab7..851bf9576052 100644
--- a/drivers/mtd/maps/l440gx.c
+++ b/drivers/mtd/maps/l440gx.c
@@ -1,5 +1,5 @@
/*
- * $Id: l440gx.c,v 1.17 2004/11/28 09:40:39 dwmw2 Exp $
+ * $Id: l440gx.c,v 1.18 2005/11/07 11:14:27 gleixner Exp $
*
* BIOS Flash chip on Intel 440GX board.
*
@@ -49,7 +49,7 @@ static struct map_info l440gx_map = {
.bankwidth = BUSWIDTH,
.phys = WINDOW_ADDR,
#if 0
- /* FIXME verify that this is the
+ /* FIXME verify that this is the
* appripriate code for vpp enable/disable
*/
.set_vpp = l440gx_set_vpp
@@ -62,10 +62,10 @@ static int __init init_l440gx(void)
struct resource *pm_iobase;
__u16 word;
- dev = pci_find_device(PCI_VENDOR_ID_INTEL,
+ dev = pci_find_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB_0, NULL);
- pm_dev = pci_find_device(PCI_VENDOR_ID_INTEL,
+ pm_dev = pci_find_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB_3, NULL);
if (!dev || !pm_dev) {
@@ -82,10 +82,10 @@ static int __init init_l440gx(void)
simple_map_init(&l440gx_map);
printk(KERN_NOTICE "window_addr = 0x%08lx\n", (unsigned long)l440gx_map.virt);
- /* Setup the pm iobase resource
+ /* Setup the pm iobase resource
* This code should move into some kind of generic bridge
* driver but for the moment I'm content with getting the
- * allocation correct.
+ * allocation correct.
*/
pm_iobase = &pm_dev->resource[PIIXE_IOBASE_RESOURCE];
if (!(pm_iobase->flags & IORESOURCE_IO)) {
@@ -110,7 +110,7 @@ static int __init init_l440gx(void)
/* Set the iobase */
iobase = pm_iobase->start;
pci_write_config_dword(pm_dev, 0x40, iobase | 1);
-
+
/* Set XBCS# */
pci_read_config_word(dev, 0x4e, &word);
@@ -122,7 +122,7 @@ static int __init init_l440gx(void)
/* Enable the gate on the WE line */
outb(inb(TRIBUF_PORT) & ~1, TRIBUF_PORT);
-
+
printk(KERN_NOTICE "Enabled WE line to L440GX BIOS flash chip.\n");
mymtd = do_map_probe("jedec_probe", &l440gx_map);
@@ -145,7 +145,7 @@ static void __exit cleanup_l440gx(void)
{
del_mtd_device(mymtd);
map_destroy(mymtd);
-
+
iounmap(l440gx_map.virt);
}
OpenPOWER on IntegriCloud