diff options
Diffstat (limited to 'drivers/misc/bmp085.c')
| -rw-r--r-- | drivers/misc/bmp085.c | 39 |
1 files changed, 34 insertions, 5 deletions
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c index 2704d885a9b3..820e53d0048f 100644 --- a/drivers/misc/bmp085.c +++ b/drivers/misc/bmp085.c @@ -49,9 +49,11 @@ #include <linux/device.h> #include <linux/init.h> #include <linux/slab.h> -#include <linux/delay.h> #include <linux/of.h> #include "bmp085.h" +#include <linux/interrupt.h> +#include <linux/completion.h> +#include <linux/gpio.h> #define BMP085_CHIP_ID 0x55 #define BMP085_CALIBRATION_DATA_START 0xAA @@ -84,8 +86,19 @@ struct bmp085_data { unsigned long last_temp_measurement; u8 chip_id; s32 b6; /* calculated temperature correction coefficient */ + int irq; + struct completion done; }; +static irqreturn_t bmp085_eoc_isr(int irq, void *devid) +{ + struct bmp085_data *data = devid; + + complete(&data->done); + + return IRQ_HANDLED; +} + static s32 bmp085_read_calibration_data(struct bmp085_data *data) { u16 tmp[BMP085_CALIBRATION_DATA_LENGTH]; @@ -116,6 +129,9 @@ static s32 bmp085_update_raw_temperature(struct bmp085_data *data) s32 status; mutex_lock(&data->lock); + + init_completion(&data->done); + status = regmap_write(data->regmap, BMP085_CTRL_REG, BMP085_TEMP_MEASUREMENT); if (status < 0) { @@ -123,7 +139,8 @@ static s32 bmp085_update_raw_temperature(struct bmp085_data *data) "Error while requesting temperature measurement.\n"); goto exit; } - msleep(BMP085_TEMP_CONVERSION_TIME); + wait_for_completion_timeout(&data->done, 1 + msecs_to_jiffies( + BMP085_TEMP_CONVERSION_TIME)); status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB, &tmp, sizeof(tmp)); @@ -147,6 +164,9 @@ static s32 bmp085_update_raw_pressure(struct bmp085_data *data) s32 status; mutex_lock(&data->lock); + + init_completion(&data->done); + status = regmap_write(data->regmap, BMP085_CTRL_REG, BMP085_PRESSURE_MEASUREMENT + (data->oversampling_setting << 6)); @@ -157,8 +177,8 @@ static s32 bmp085_update_raw_pressure(struct bmp085_data *data) } /* wait for the end of conversion */ - msleep(2+(3 << data->oversampling_setting)); - + wait_for_completion_timeout(&data->done, 1 + msecs_to_jiffies( + 2+(3 << data->oversampling_setting))); /* copy data into a u32 (4 bytes), but skip the first byte. */ status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB, ((u8 *)&tmp)+1, 3); @@ -420,7 +440,7 @@ struct regmap_config bmp085_regmap_config = { }; EXPORT_SYMBOL_GPL(bmp085_regmap_config); -int bmp085_probe(struct device *dev, struct regmap *regmap) +int bmp085_probe(struct device *dev, struct regmap *regmap, int irq) { struct bmp085_data *data; int err = 0; @@ -434,6 +454,15 @@ int bmp085_probe(struct device *dev, struct regmap *regmap) dev_set_drvdata(dev, data); data->dev = dev; data->regmap = regmap; + data->irq = irq; + + if (data->irq > 0) { + err = devm_request_irq(dev, data->irq, bmp085_eoc_isr, + IRQF_TRIGGER_RISING, "bmp085", + data); + if (err < 0) + goto exit_free; + } /* Initialize the BMP085 chip */ err = bmp085_init_client(data); |
