diff options
Diffstat (limited to 'drivers/mfd/stmpe.c')
-rw-r--r-- | drivers/mfd/stmpe.c | 277 |
1 files changed, 170 insertions, 107 deletions
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 2963689cf45c..e07947e56b2a 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -1,18 +1,20 @@ /* + * ST Microelectronics MFD: stmpe's driver + * * Copyright (C) ST-Ericsson SA 2010 * * License Terms: GNU General Public License, version 2 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson */ +#include <linux/gpio.h> +#include <linux/export.h> #include <linux/kernel.h> -#include <linux/module.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/pm.h> #include <linux/slab.h> -#include <linux/i2c.h> #include <linux/mfd/core.h> -#include <linux/mfd/stmpe.h> #include "stmpe.h" static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks) @@ -29,10 +31,9 @@ static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg) { int ret; - ret = i2c_smbus_read_byte_data(stmpe->i2c, reg); + ret = stmpe->ci->read_byte(stmpe, reg); if (ret < 0) - dev_err(stmpe->dev, "failed to read reg %#x: %d\n", - reg, ret); + dev_err(stmpe->dev, "failed to read reg %#x: %d\n", reg, ret); dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret); @@ -45,10 +46,9 @@ static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val) dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val); - ret = i2c_smbus_write_byte_data(stmpe->i2c, reg, val); + ret = stmpe->ci->write_byte(stmpe, reg, val); if (ret < 0) - dev_err(stmpe->dev, "failed to write reg %#x: %d\n", - reg, ret); + dev_err(stmpe->dev, "failed to write reg %#x: %d\n", reg, ret); return ret; } @@ -72,10 +72,9 @@ static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, { int ret; - ret = i2c_smbus_read_i2c_block_data(stmpe->i2c, reg, length, values); + ret = stmpe->ci->read_block(stmpe, reg, length, values); if (ret < 0) - dev_err(stmpe->dev, "failed to read regs %#x: %d\n", - reg, ret); + dev_err(stmpe->dev, "failed to read regs %#x: %d\n", reg, ret); dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret); stmpe_dump_bytes("stmpe rd: ", values, length); @@ -91,11 +90,9 @@ static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length); stmpe_dump_bytes("stmpe wr: ", values, length); - ret = i2c_smbus_write_i2c_block_data(stmpe->i2c, reg, length, - values); + ret = stmpe->ci->write_block(stmpe, reg, length, values); if (ret < 0) - dev_err(stmpe->dev, "failed to write regs %#x: %d\n", - reg, ret); + dev_err(stmpe->dev, "failed to write regs %#x: %d\n", reg, ret); return ret; } @@ -245,12 +242,14 @@ int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block) u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB]; int af_bits = variant->af_bits; int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8); - int afperreg = 8 / af_bits; int mask = (1 << af_bits) - 1; u8 regs[numregs]; - int af; - int ret; + int af, afperreg, ret; + + if (!variant->get_altfunc) + return 0; + afperreg = 8 / af_bits; mutex_lock(&stmpe->lock); ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO); @@ -325,7 +324,51 @@ static struct mfd_cell stmpe_keypad_cell = { }; /* - * Touchscreen (STMPE811) + * STMPE801 + */ +static const u8 stmpe801_regs[] = { + [STMPE_IDX_CHIP_ID] = STMPE801_REG_CHIP_ID, + [STMPE_IDX_ICR_LSB] = STMPE801_REG_SYS_CTRL, + [STMPE_IDX_GPMR_LSB] = STMPE801_REG_GPIO_MP_STA, + [STMPE_IDX_GPSR_LSB] = STMPE801_REG_GPIO_SET_PIN, + [STMPE_IDX_GPCR_LSB] = STMPE801_REG_GPIO_SET_PIN, + [STMPE_IDX_GPDR_LSB] = STMPE801_REG_GPIO_DIR, + [STMPE_IDX_IEGPIOR_LSB] = STMPE801_REG_GPIO_INT_EN, + [STMPE_IDX_ISGPIOR_MSB] = STMPE801_REG_GPIO_INT_STA, + +}; + +static struct stmpe_variant_block stmpe801_blocks[] = { + { + .cell = &stmpe_gpio_cell, + .irq = 0, + .block = STMPE_BLOCK_GPIO, + }, +}; + +static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks, + bool enable) +{ + if (blocks & STMPE_BLOCK_GPIO) + return 0; + else + return -EINVAL; +} + +static struct stmpe_variant_info stmpe801 = { + .name = "stmpe801", + .id_val = STMPE801_ID, + .id_mask = 0xffff, + .num_gpios = 8, + .regs = stmpe801_regs, + .blocks = stmpe801_blocks, + .num_blocks = ARRAY_SIZE(stmpe801_blocks), + .num_irqs = STMPE801_NR_INTERNAL_IRQS, + .enable = stmpe801_enable, +}; + +/* + * Touchscreen (STMPE811 or STMPE610) */ static struct resource stmpe_ts_resources[] = { @@ -350,7 +393,7 @@ static struct mfd_cell stmpe_ts_cell = { }; /* - * STMPE811 + * STMPE811 or STMPE610 */ static const u8 stmpe811_regs[] = { @@ -421,6 +464,21 @@ static struct stmpe_variant_info stmpe811 = { .get_altfunc = stmpe811_get_altfunc, }; +/* Similar to 811, except number of gpios */ +static struct stmpe_variant_info stmpe610 = { + .name = "stmpe610", + .id_val = 0x0811, + .id_mask = 0xffff, + .num_gpios = 6, + .af_bits = 1, + .regs = stmpe811_regs, + .blocks = stmpe811_blocks, + .num_blocks = ARRAY_SIZE(stmpe811_blocks), + .num_irqs = STMPE811_NR_INTERNAL_IRQS, + .enable = stmpe811_enable, + .get_altfunc = stmpe811_get_altfunc, +}; + /* * STMPE1601 */ @@ -655,6 +713,8 @@ static struct stmpe_variant_info stmpe2403 = { }; static struct stmpe_variant_info *stmpe_variant_info[] = { + [STMPE610] = &stmpe610, + [STMPE801] = &stmpe801, [STMPE811] = &stmpe811, [STMPE1601] = &stmpe1601, [STMPE2401] = &stmpe2401, @@ -671,6 +731,11 @@ static irqreturn_t stmpe_irq(int irq, void *data) int ret; int i; + if (variant->id_val == STMPE801_ID) { + handle_nested_irq(stmpe->irq_base); + return IRQ_HANDLED; + } + ret = stmpe_block_read(stmpe, israddr, num, isr); if (ret < 0) return IRQ_NONE; @@ -757,14 +822,17 @@ static struct irq_chip stmpe_irq_chip = { static int __devinit stmpe_irq_init(struct stmpe *stmpe) { + struct irq_chip *chip = NULL; int num_irqs = stmpe->variant->num_irqs; int base = stmpe->irq_base; int irq; + if (stmpe->variant->id_val != STMPE801_ID) + chip = &stmpe_irq_chip; + for (irq = base; irq < base + num_irqs; irq++) { irq_set_chip_data(irq, stmpe); - irq_set_chip_and_handler(irq, &stmpe_irq_chip, - handle_edge_irq); + irq_set_chip_and_handler(irq, chip, handle_edge_irq); irq_set_nested_thread(irq, 1); #ifdef CONFIG_ARM set_irq_flags(irq, IRQF_VALID); @@ -796,7 +864,7 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe) unsigned int irq_trigger = stmpe->pdata->irq_trigger; int autosleep_timeout = stmpe->pdata->autosleep_timeout; struct stmpe_variant_info *variant = stmpe->variant; - u8 icr = STMPE_ICR_LSB_GIM; + u8 icr; unsigned int id; u8 data[2]; int ret; @@ -819,16 +887,32 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe) if (ret) return ret; - if (irq_trigger == IRQF_TRIGGER_FALLING || - irq_trigger == IRQF_TRIGGER_RISING) - icr |= STMPE_ICR_LSB_EDGE; + if (id == STMPE801_ID) + icr = STMPE801_REG_SYS_CTRL_INT_EN; + else + icr = STMPE_ICR_LSB_GIM; + + /* STMPE801 doesn't support Edge interrupts */ + if (id != STMPE801_ID) { + if (irq_trigger == IRQF_TRIGGER_FALLING || + irq_trigger == IRQF_TRIGGER_RISING) + icr |= STMPE_ICR_LSB_EDGE; + } if (irq_trigger == IRQF_TRIGGER_RISING || - irq_trigger == IRQF_TRIGGER_HIGH) - icr |= STMPE_ICR_LSB_HIGH; + irq_trigger == IRQF_TRIGGER_HIGH) { + if (id == STMPE801_ID) + icr |= STMPE801_REG_SYS_CTRL_INT_HI; + else + icr |= STMPE_ICR_LSB_HIGH; + } - if (stmpe->pdata->irq_invert_polarity) - icr ^= STMPE_ICR_LSB_HIGH; + if (stmpe->pdata->irq_invert_polarity) { + if (id == STMPE801_ID) + icr ^= STMPE801_REG_SYS_CTRL_INT_HI; + else + icr ^= STMPE_ICR_LSB_HIGH; + } if (stmpe->pdata->autosleep) { ret = stmpe_autosleep(stmpe, autosleep_timeout); @@ -873,32 +957,10 @@ static int __devinit stmpe_devices_init(struct stmpe *stmpe) return ret; } -#ifdef CONFIG_PM -static int stmpe_suspend(struct device *dev) -{ - struct i2c_client *i2c = to_i2c_client(dev); - - if (device_may_wakeup(&i2c->dev)) - enable_irq_wake(i2c->irq); - - return 0; -} - -static int stmpe_resume(struct device *dev) -{ - struct i2c_client *i2c = to_i2c_client(dev); - - if (device_may_wakeup(&i2c->dev)) - disable_irq_wake(i2c->irq); - - return 0; -} -#endif - -static int __devinit stmpe_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) +/* Called from client specific probe routines */ +int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum) { - struct stmpe_platform_data *pdata = i2c->dev.platform_data; + struct stmpe_platform_data *pdata = dev_get_platdata(ci->dev); struct stmpe *stmpe; int ret; @@ -912,30 +974,43 @@ static int __devinit stmpe_probe(struct i2c_client *i2c, mutex_init(&stmpe->irq_lock); mutex_init(&stmpe->lock); - stmpe->dev = &i2c->dev; - stmpe->i2c = i2c; - + stmpe->dev = ci->dev; + stmpe->client = ci->client; stmpe->pdata = pdata; stmpe->irq_base = pdata->irq_base; - - stmpe->partnum = id->driver_data; - stmpe->variant = stmpe_variant_info[stmpe->partnum]; + stmpe->ci = ci; + stmpe->partnum = partnum; + stmpe->variant = stmpe_variant_info[partnum]; stmpe->regs = stmpe->variant->regs; stmpe->num_gpios = stmpe->variant->num_gpios; + dev_set_drvdata(stmpe->dev, stmpe); - i2c_set_clientdata(i2c, stmpe); + if (ci->init) + ci->init(stmpe); + + if (pdata->irq_over_gpio) { + ret = gpio_request_one(pdata->irq_gpio, GPIOF_DIR_IN, "stmpe"); + if (ret) { + dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n", + ret); + goto out_free; + } + + stmpe->irq = gpio_to_irq(pdata->irq_gpio); + } else { + stmpe->irq = ci->irq; + } ret = stmpe_chip_init(stmpe); if (ret) - goto out_free; + goto free_gpio; ret = stmpe_irq_init(stmpe); if (ret) - goto out_free; + goto free_gpio; - ret = request_threaded_irq(stmpe->i2c->irq, NULL, stmpe_irq, - pdata->irq_trigger | IRQF_ONESHOT, - "stmpe", stmpe); + ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq, + pdata->irq_trigger | IRQF_ONESHOT, "stmpe", stmpe); if (ret) { dev_err(stmpe->dev, "failed to request IRQ: %d\n", ret); goto out_removeirq; @@ -951,67 +1026,55 @@ static int __devinit stmpe_probe(struct i2c_client *i2c, out_removedevs: mfd_remove_devices(stmpe->dev); - free_irq(stmpe->i2c->irq, stmpe); + free_irq(stmpe->irq, stmpe); out_removeirq: stmpe_irq_remove(stmpe); +free_gpio: + if (pdata->irq_over_gpio) + gpio_free(pdata->irq_gpio); out_free: kfree(stmpe); return ret; } -static int __devexit stmpe_remove(struct i2c_client *client) +int stmpe_remove(struct stmpe *stmpe) { - struct stmpe *stmpe = i2c_get_clientdata(client); - mfd_remove_devices(stmpe->dev); - free_irq(stmpe->i2c->irq, stmpe); + free_irq(stmpe->irq, stmpe); stmpe_irq_remove(stmpe); + if (stmpe->pdata->irq_over_gpio) + gpio_free(stmpe->pdata->irq_gpio); + kfree(stmpe); return 0; } -static const struct i2c_device_id stmpe_id[] = { - { "stmpe811", STMPE811 }, - { "stmpe1601", STMPE1601 }, - { "stmpe2401", STMPE2401 }, - { "stmpe2403", STMPE2403 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, stmpe_id); - #ifdef CONFIG_PM -static const struct dev_pm_ops stmpe_dev_pm_ops = { - .suspend = stmpe_suspend, - .resume = stmpe_resume, -}; -#endif +static int stmpe_suspend(struct device *dev) +{ + struct stmpe *stmpe = dev_get_drvdata(dev); -static struct i2c_driver stmpe_driver = { - .driver.name = "stmpe", - .driver.owner = THIS_MODULE, -#ifdef CONFIG_PM - .driver.pm = &stmpe_dev_pm_ops, -#endif - .probe = stmpe_probe, - .remove = __devexit_p(stmpe_remove), - .id_table = stmpe_id, -}; + if (device_may_wakeup(dev)) + enable_irq_wake(stmpe->irq); -static int __init stmpe_init(void) -{ - return i2c_add_driver(&stmpe_driver); + return 0; } -subsys_initcall(stmpe_init); -static void __exit stmpe_exit(void) +static int stmpe_resume(struct device *dev) { - i2c_del_driver(&stmpe_driver); + struct stmpe *stmpe = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + disable_irq_wake(stmpe->irq); + + return 0; } -module_exit(stmpe_exit); -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("STMPE MFD core driver"); -MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>"); +const struct dev_pm_ops stmpe_dev_pm_ops = { + .suspend = stmpe_suspend, + .resume = stmpe_resume, +}; +#endif |