diff options
Diffstat (limited to 'drivers/media')
| -rw-r--r-- | drivers/media/dvb-frontends/drx39xyj/drx_driver.h | 8 | ||||
| -rw-r--r-- | drivers/media/dvb-frontends/horus3a.c | 2 | ||||
| -rw-r--r-- | drivers/media/platform/coda/imx-vdoa.c | 2 | ||||
| -rw-r--r-- | drivers/media/platform/exynos-gsc/gsc-core.c | 2 | ||||
| -rw-r--r-- | drivers/media/platform/mtk-vpu/mtk_vpu.c | 2 | ||||
| -rw-r--r-- | drivers/media/platform/sti/bdisp/bdisp-v4l2.c | 2 | ||||
| -rw-r--r-- | drivers/media/platform/vsp1/vsp1_drm.c | 33 | ||||
| -rw-r--r-- | drivers/media/rc/lirc_dev.c | 4 | ||||
| -rw-r--r-- | drivers/media/rc/nuvoton-cir.c | 5 | ||||
| -rw-r--r-- | drivers/media/rc/rc-main.c | 26 | ||||
| -rw-r--r-- | drivers/media/rc/serial_ir.c | 123 | ||||
| -rw-r--r-- | drivers/media/usb/dvb-usb/dvb-usb-firmware.c | 22 | ||||
| -rw-r--r-- | drivers/media/usb/dvb-usb/dw2102.c | 244 | ||||
| -rw-r--r-- | drivers/media/usb/pwc/philips.txt | 236 | ||||
| -rw-r--r-- | drivers/media/v4l2-core/videobuf2-dma-contig.c | 4 | ||||
| -rw-r--r-- | drivers/media/v4l2-core/videobuf2-dma-sg.c | 4 | ||||
| -rw-r--r-- | drivers/media/v4l2-core/videobuf2-vmalloc.c | 4 |
17 files changed, 268 insertions, 455 deletions
diff --git a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h index 7a681d8202c7..4442e478db72 100644 --- a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h +++ b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h @@ -256,8 +256,7 @@ int drxbsp_tuner_default_i2c_write_read(struct tuner_instance *tuner, * * The actual DAP implementation may be restricted to only one of the modes. * A compiler warning or error will be generated if the DAP implementation -* overides or cannot handle the mode defined below. -* +* overrides or cannot handle the mode defined below. */ #ifndef DRXDAP_SINGLE_MASTER #define DRXDAP_SINGLE_MASTER 1 @@ -272,7 +271,7 @@ int drxbsp_tuner_default_i2c_write_read(struct tuner_instance *tuner, * * This maximum size may be restricted by the actual DAP implementation. * A compiler warning or error will be generated if the DAP implementation -* overides or cannot handle the chunksize defined below. +* overrides or cannot handle the chunksize defined below. * * Beware that the DAP uses DRXDAP_MAX_WCHUNKSIZE to create a temporary data * buffer. Do not undefine or choose too large, unless your system is able to @@ -292,8 +291,7 @@ int drxbsp_tuner_default_i2c_write_read(struct tuner_instance *tuner, * * This maximum size may be restricted by the actual DAP implementation. * A compiler warning or error will be generated if the DAP implementation -* overides or cannot handle the chunksize defined below. -* +* overrides or cannot handle the chunksize defined below. */ #ifndef DRXDAP_MAX_RCHUNKSIZE #define DRXDAP_MAX_RCHUNKSIZE 60 diff --git a/drivers/media/dvb-frontends/horus3a.c b/drivers/media/dvb-frontends/horus3a.c index 94bb4f7a2298..68d759c4c52e 100644 --- a/drivers/media/dvb-frontends/horus3a.c +++ b/drivers/media/dvb-frontends/horus3a.c @@ -404,6 +404,6 @@ struct dvb_frontend *horus3a_attach(struct dvb_frontend *fe, } EXPORT_SYMBOL(horus3a_attach); -MODULE_DESCRIPTION("Sony HORUS3A sattelite tuner driver"); +MODULE_DESCRIPTION("Sony HORUS3A satellite tuner driver"); MODULE_AUTHOR("Sergey Kozlov <serjk@netup.ru>"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/coda/imx-vdoa.c b/drivers/media/platform/coda/imx-vdoa.c index 67fd8ffa60a4..669a4c82f1ff 100644 --- a/drivers/media/platform/coda/imx-vdoa.c +++ b/drivers/media/platform/coda/imx-vdoa.c @@ -321,7 +321,7 @@ static const struct of_device_id vdoa_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, vdoa_dt_ids); -static const struct platform_driver vdoa_driver = { +static struct platform_driver vdoa_driver = { .probe = vdoa_probe, .remove = vdoa_remove, .driver = { diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c index cbb03768f5d7..0f0c389f8897 100644 --- a/drivers/media/platform/exynos-gsc/gsc-core.c +++ b/drivers/media/platform/exynos-gsc/gsc-core.c @@ -861,9 +861,7 @@ int gsc_prepare_addr(struct gsc_ctx *ctx, struct vb2_buffer *vb, if ((frame->fmt->pixelformat == V4L2_PIX_FMT_VYUY) || (frame->fmt->pixelformat == V4L2_PIX_FMT_YVYU) || - (frame->fmt->pixelformat == V4L2_PIX_FMT_NV61) || (frame->fmt->pixelformat == V4L2_PIX_FMT_YVU420) || - (frame->fmt->pixelformat == V4L2_PIX_FMT_NV21) || (frame->fmt->pixelformat == V4L2_PIX_FMT_YVU420M)) swap(addr->cb, addr->cr); diff --git a/drivers/media/platform/mtk-vpu/mtk_vpu.c b/drivers/media/platform/mtk-vpu/mtk_vpu.c index 463b69c934be..aa44e11decca 100644 --- a/drivers/media/platform/mtk-vpu/mtk_vpu.c +++ b/drivers/media/platform/mtk-vpu/mtk_vpu.c @@ -589,7 +589,7 @@ int vpu_load_firmware(struct platform_device *pdev) ); if (ret == 0) { ret = -ETIME; - dev_err(dev, "wait vpu initialization timout!\n"); + dev_err(dev, "wait vpu initialization timeout!\n"); goto OUT_LOAD_FW; } else if (-ERESTARTSYS == ret) { dev_err(dev, "wait vpu interrupted by a signal!\n"); diff --git a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c index 823608112d89..7918b928f058 100644 --- a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c +++ b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c @@ -632,8 +632,8 @@ static int bdisp_open(struct file *file) error_ctrls: bdisp_ctrls_delete(ctx); -error_fh: v4l2_fh_del(&ctx->fh); +error_fh: v4l2_fh_exit(&ctx->fh); bdisp_hw_free_nodes(ctx); mem_ctx: diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c index b4b583f7137a..b4c0f10fc3b0 100644 --- a/drivers/media/platform/vsp1/vsp1_drm.c +++ b/drivers/media/platform/vsp1/vsp1_drm.c @@ -54,12 +54,11 @@ EXPORT_SYMBOL_GPL(vsp1_du_init); /** * vsp1_du_setup_lif - Setup the output part of the VSP pipeline * @dev: the VSP device - * @width: output frame width in pixels - * @height: output frame height in pixels + * @cfg: the LIF configuration * - * Configure the output part of VSP DRM pipeline for the given frame @width and - * @height. This sets up formats on the BRU source pad, the WPF0 sink and source - * pads, and the LIF sink pad. + * Configure the output part of VSP DRM pipeline for the given frame @cfg.width + * and @cfg.height. This sets up formats on the BRU source pad, the WPF0 sink + * and source pads, and the LIF sink pad. * * As the media bus code on the BRU source pad is conditioned by the * configuration of the BRU sink 0 pad, we also set up the formats on all BRU @@ -69,8 +68,7 @@ EXPORT_SYMBOL_GPL(vsp1_du_init); * * Return 0 on success or a negative error code on failure. */ -int vsp1_du_setup_lif(struct device *dev, unsigned int width, - unsigned int height) +int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg) { struct vsp1_device *vsp1 = dev_get_drvdata(dev); struct vsp1_pipeline *pipe = &vsp1->drm->pipe; @@ -79,11 +77,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width, unsigned int i; int ret; - dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n", - __func__, width, height); - - if (width == 0 || height == 0) { - /* Zero width or height means the CRTC is being disabled, stop + if (!cfg) { + /* NULL configuration means the CRTC is being disabled, stop * the pipeline and turn the light off. */ ret = vsp1_pipeline_stop(pipe); @@ -108,6 +103,9 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width, return 0; } + dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n", + __func__, cfg->width, cfg->height); + /* Configure the format at the BRU sinks and propagate it through the * pipeline. */ @@ -117,8 +115,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width, for (i = 0; i < bru->entity.source_pad; ++i) { format.pad = i; - format.format.width = width; - format.format.height = height; + format.format.width = cfg->width; + format.format.height = cfg->height; format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32; format.format.field = V4L2_FIELD_NONE; @@ -133,8 +131,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width, } format.pad = bru->entity.source_pad; - format.format.width = width; - format.format.height = height; + format.format.width = cfg->width; + format.format.height = cfg->height; format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32; format.format.field = V4L2_FIELD_NONE; @@ -180,7 +178,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width, /* Verify that the format at the output of the pipeline matches the * requested frame size and media bus code. */ - if (format.format.width != width || format.format.height != height || + if (format.format.width != cfg->width || + format.format.height != cfg->height || format.format.code != MEDIA_BUS_FMT_ARGB8888_1X32) { dev_dbg(vsp1->dev, "%s: format mismatch\n", __func__); return -EPIPE; diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c index 393dccaabdd0..1688893a65bb 100644 --- a/drivers/media/rc/lirc_dev.c +++ b/drivers/media/rc/lirc_dev.c @@ -436,6 +436,8 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file) return -ERESTARTSYS; ir = irctls[iminor(inode)]; + mutex_unlock(&lirc_dev_lock); + if (!ir) { retval = -ENODEV; goto error; @@ -476,8 +478,6 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file) } error: - mutex_unlock(&lirc_dev_lock); - nonseekable_open(inode, file); return retval; diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c index b109f8246b96..ec4b25bd2ec2 100644 --- a/drivers/media/rc/nuvoton-cir.c +++ b/drivers/media/rc/nuvoton-cir.c @@ -176,12 +176,13 @@ static void nvt_write_wakeup_codes(struct rc_dev *dev, { u8 tolerance, config; struct nvt_dev *nvt = dev->priv; + unsigned long flags; int i; /* hardcode the tolerance to 10% */ tolerance = DIV_ROUND_UP(count, 10); - spin_lock(&nvt->lock); + spin_lock_irqsave(&nvt->lock, flags); nvt_clear_cir_wake_fifo(nvt); nvt_cir_wake_reg_write(nvt, count, CIR_WAKE_FIFO_CMP_DEEP); @@ -203,7 +204,7 @@ static void nvt_write_wakeup_codes(struct rc_dev *dev, nvt_cir_wake_reg_write(nvt, config, CIR_WAKE_IRCON); - spin_unlock(&nvt->lock); + spin_unlock_irqrestore(&nvt->lock, flags); } static ssize_t wakeup_data_show(struct device *dev, diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 2424946740e6..d84533699668 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -1663,6 +1663,7 @@ static int rc_setup_rx_device(struct rc_dev *dev) { int rc; struct rc_map *rc_map; + u64 rc_type; if (!dev->map_name) return -EINVAL; @@ -1677,15 +1678,18 @@ static int rc_setup_rx_device(struct rc_dev *dev) if (rc) return rc; - if (dev->change_protocol) { - u64 rc_type = (1ll << rc_map->rc_type); + rc_type = BIT_ULL(rc_map->rc_type); + if (dev->change_protocol) { rc = dev->change_protocol(dev, &rc_type); if (rc < 0) goto out_table; dev->enabled_protocols = rc_type; } + if (dev->driver_type == RC_DRIVER_IR_RAW) + ir_raw_load_modules(&rc_type); + set_bit(EV_KEY, dev->input_dev->evbit); set_bit(EV_REP, dev->input_dev->evbit); set_bit(EV_MSC, dev->input_dev->evbit); @@ -1777,12 +1781,6 @@ int rc_register_device(struct rc_dev *dev) dev->input_name ?: "Unspecified device", path ?: "N/A"); kfree(path); - if (dev->driver_type != RC_DRIVER_IR_RAW_TX) { - rc = rc_setup_rx_device(dev); - if (rc) - goto out_dev; - } - if (dev->driver_type == RC_DRIVER_IR_RAW || dev->driver_type == RC_DRIVER_IR_RAW_TX) { if (!raw_init) { @@ -1791,7 +1789,13 @@ int rc_register_device(struct rc_dev *dev) } rc = ir_raw_event_register(dev); if (rc < 0) - goto out_rx; + goto out_dev; + } + + if (dev->driver_type != RC_DRIVER_IR_RAW_TX) { + rc = rc_setup_rx_device(dev); + if (rc) + goto out_raw; } /* Allow the RC sysfs nodes to be accessible */ @@ -1803,8 +1807,8 @@ int rc_register_device(struct rc_dev *dev) return 0; -out_rx: - rc_free_rx_device(dev); +out_raw: + ir_raw_event_unregister(dev); out_dev: device_del(&dev->dev); out_unlock: diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c index 923fb2299553..41b54e40176c 100644 --- a/drivers/media/rc/serial_ir.c +++ b/drivers/media/rc/serial_ir.c @@ -487,10 +487,69 @@ static void serial_ir_timeout(unsigned long arg) ir_raw_event_handle(serial_ir.rcdev); } +/* Needed by serial_ir_probe() */ +static int serial_ir_tx(struct rc_dev *dev, unsigned int *txbuf, + unsigned int count); +static int serial_ir_tx_duty_cycle(struct rc_dev *dev, u32 cycle); +static int serial_ir_tx_carrier(struct rc_dev *dev, u32 carrier); +static int serial_ir_open(struct rc_dev *rcdev); +static void serial_ir_close(struct rc_dev *rcdev); + static int serial_ir_probe(struct platform_device *dev) { + struct rc_dev *rcdev; int i, nlow, nhigh, result; + rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW); + if (!rcdev) + return -ENOMEM; + + if (hardware[type].send_pulse && hardware[type].send_space) + rcdev->tx_ir = serial_ir_tx; + if (hardware[type].set_send_carrier) + rcdev->s_tx_carrier = serial_ir_tx_carrier; + if (hardware[type].set_duty_cycle) + rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle; + + switch (type) { + case IR_HOMEBREW: + rcdev->input_name = "Serial IR type home-brew"; + break; + case IR_IRDEO: + rcdev->input_name = "Serial IR type IRdeo"; + break; + case IR_IRDEO_REMOTE: + rcdev->input_name = "Serial IR type IRdeo remote"; + break; + case IR_ANIMAX: + rcdev->input_name = "Serial IR type AnimaX"; + break; + case IR_IGOR: + rcdev->input_name = "Serial IR type IgorPlug"; + break; + } + + rcdev->input_phys = KBUILD_MODNAME "/input0"; + rcdev->input_id.bustype = BUS_HOST; + rcdev->input_id.vendor = 0x0001; + rcdev->input_id.product = 0x0001; + rcdev->input_id.version = 0x0100; + rcdev->open = serial_ir_open; + rcdev->close = serial_ir_close; + rcdev->dev.parent = &serial_ir.pdev->dev; + rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER; + rcdev->driver_name = KBUILD_MODNAME; + rcdev->map_name = RC_MAP_RC6_MCE; + rcdev->min_timeout = 1; + rcdev->timeout = IR_DEFAULT_TIMEOUT; + rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT; + rcdev->rx_resolution = 250000; + + serial_ir.rcdev = rcdev; + + setup_timer(&serial_ir.timeout_timer, serial_ir_timeout, + (unsigned long)&serial_ir); + result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler, share_irq ? IRQF_SHARED : 0, KBUILD_MODNAME, &hardware); @@ -516,9 +575,6 @@ static int serial_ir_probe(struct platform_device *dev) return -EBUSY; } - setup_timer(&serial_ir.timeout_timer, serial_ir_timeout, - (unsigned long)&serial_ir); - result = hardware_init_port(); if (result < 0) return result; @@ -552,7 +608,8 @@ static int serial_ir_probe(struct platform_device *dev) sense ? "low" : "high"); dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io); - return 0; + + return devm_rc_register_device(&dev->dev, rcdev); } static int serial_ir_open(struct rc_dev *rcdev) @@ -723,7 +780,6 @@ static void serial_ir_exit(void) static int __init serial_ir_init_module(void) { - struct rc_dev *rcdev; int result; switch (type) { @@ -754,63 +810,9 @@ static int __init serial_ir_init_module(void) sense = !!sense; result = serial_ir_init(); - if (result) - return result; - - rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW); - if (!rcdev) { - result = -ENOMEM; - goto serial_cleanup; - } - - if (hardware[type].send_pulse && hardware[type].send_space) - rcdev->tx_ir = serial_ir_tx; - if (hardware[type].set_send_carrier) - rcdev->s_tx_carrier = serial_ir_tx_carrier; - if (hardware[type].set_duty_cycle) - rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle; - - switch (type) { - case IR_HOMEBREW: - rcdev->input_name = "Serial IR type home-brew"; - break; - case IR_IRDEO: - rcdev->input_name = "Serial IR type IRdeo"; - break; - case IR_IRDEO_REMOTE: - rcdev->input_name = "Serial IR type IRdeo remote"; - break; - case IR_ANIMAX: - rcdev->input_name = "Serial IR type AnimaX"; - break; - case IR_IGOR: - rcdev->input_name = "Serial IR type IgorPlug"; - break; - } - - rcdev->input_phys = KBUILD_MODNAME "/input0"; - rcdev->input_id.bustype = BUS_HOST; - rcdev->input_id.vendor = 0x0001; - rcdev->input_id.product = 0x0001; - rcdev->input_id.version = 0x0100; - rcdev->open = serial_ir_open; - rcdev->close = serial_ir_close; - rcdev->dev.parent = &serial_ir.pdev->dev; - rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER; - rcdev->driver_name = KBUILD_MODNAME; - rcdev->map_name = RC_MAP_RC6_MCE; - rcdev->min_timeout = 1; - rcdev->timeout = IR_DEFAULT_TIMEOUT; - rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT; - rcdev->rx_resolution = 250000; - - serial_ir.rcdev = rcdev; - - result = rc_register_device(rcdev); - if (!result) return 0; -serial_cleanup: + serial_ir_exit(); return result; } @@ -818,7 +820,6 @@ serial_cleanup: static void __exit serial_ir_exit_module(void) { del_timer_sync(&serial_ir.timeout_timer); - rc_unregister_device(serial_ir.rcdev); serial_ir_exit(); } diff --git a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c index ab9866024ec7..04033efe7ad5 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c +++ b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c @@ -36,16 +36,18 @@ static int usb_cypress_writemem(struct usb_device *udev,u16 addr,u8 *data, u8 le int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type) { struct hexline *hx; - u8 reset; - int ret,pos=0; + u8 *buf; + int ret, pos = 0; + u16 cpu_cs_register = cypress[type].cpu_cs_register; - hx = kmalloc(sizeof(*hx), GFP_KERNEL); - if (!hx) + buf = kmalloc(sizeof(*hx), GFP_KERNEL); + if (!buf) return -ENOMEM; + hx = (struct hexline *)buf; /* stop the CPU */ - reset = 1; - if ((ret = usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1)) != 1) + buf[0] = 1; + if (usb_cypress_writemem(udev, cpu_cs_register, buf, 1) != 1) err("could not stop the USB controller CPU."); while ((ret = dvb_usb_get_hexline(fw, hx, &pos)) > 0) { @@ -61,21 +63,21 @@ int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw } if (ret < 0) { err("firmware download failed at %d with %d",pos,ret); - kfree(hx); + kfree(buf); return ret; } if (ret == 0) { /* restart the CPU */ - reset = 0; - if (ret || usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1) != 1) { + buf[0] = 0; + if (usb_cypress_writemem(udev, cpu_cs_register, buf, 1) != 1) { err("could not restart the USB controller CPU."); ret = -EINVAL; } } else ret = -EIO; - kfree(hx); + kfree(buf); return ret; } diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c index 6ca502d834b4..4f42d57f81d9 100644 --- a/drivers/media/usb/dvb-usb/dw2102.c +++ b/drivers/media/usb/dvb-usb/dw2102.c @@ -68,6 +68,7 @@ struct dw2102_state { u8 initialized; u8 last_lock; + u8 data[MAX_XFER_SIZE + 4]; struct i2c_client *i2c_client_demod; struct i2c_client *i2c_client_tuner; @@ -661,62 +662,72 @@ static int su3000_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { struct dvb_usb_device *d = i2c_get_adapdata(adap); - u8 obuf[0x40], ibuf[0x40]; + struct dw2102_state *state; if (!d) return -ENODEV; + + state = d->priv; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) return -EAGAIN; + if (mutex_lock_interruptible(&d->data_mutex) < 0) { + mutex_unlock(&d->i2c_mutex); + return -EAGAIN; + } switch (num) { case 1: switch (msg[0].addr) { case SU3000_STREAM_CTRL: - obuf[0] = msg[0].buf[0] + 0x36; - obuf[1] = 3; - obuf[2] = 0; - if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 0, 0) < 0) + state->data[0] = msg[0].buf[0] + 0x36; + state->data[1] = 3; + state->data[2] = 0; + if (dvb_usb_generic_rw(d, state->data, 3, + state->data, 0, 0) < 0) err("i2c transfer failed."); break; case DW2102_RC_QUERY: - obuf[0] = 0x10; - if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 2, 0) < 0) + state->data[0] = 0x10; + if (dvb_usb_generic_rw(d, state->data, 1, + state->data, 2, 0) < 0) err("i2c transfer failed."); - msg[0].buf[1] = ibuf[0]; - msg[0].buf[0] = ibuf[1]; + msg[0].buf[1] = state->data[0]; + msg[0].buf[0] = state->data[1]; break; default: /* always i2c write*/ - obuf[0] = 0x08; - obuf[1] = msg[0].addr; - obuf[2] = msg[0].len; + state->data[0] = 0x08; + state->data[1] = msg[0].addr; + state->data[2] = msg[0].len; - memcpy(&obuf[3], msg[0].buf, msg[0].len); + memcpy(&state->data[3], msg[0].buf, msg[0].len); - if (dvb_usb_generic_rw(d, obuf, msg[0].len + 3, - ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, msg[0].len + 3, + state->data, 1, 0) < 0) err("i2c transfer failed."); } break; case 2: /* always i2c read */ - obuf[0] = 0x09; - obuf[1] = msg[0].len; - obuf[2] = msg[1].len; - obuf[3] = msg[0].addr; - memcpy(&obuf[4], msg[0].buf, msg[0].len); - - if (dvb_usb_generic_rw(d, obuf, msg[0].len + 4, - ibuf, msg[1].len + 1, 0) < 0) + state->data[0] = 0x09; + state->data[1] = msg[0].len; + state->data[2] = msg[1].len; + state->data[3] = msg[0].addr; + memcpy(&state->data[4], msg[0].buf, msg[0].len); + + if (dvb_usb_generic_rw(d, state->data, msg[0].len + 4, + state->data, msg[1].len + 1, 0) < 0) err("i2c transfer failed."); - memcpy(msg[1].buf, &ibuf[1], msg[1].len); + memcpy(msg[1].buf, &state->data[1], msg[1].len); break; default: warn("more than 2 i2c messages at a time is not handled yet."); break; } + mutex_unlock(&d->data_mutex); mutex_unlock(&d->i2c_mutex); return num; } @@ -844,17 +855,23 @@ static int su3000_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) static int su3000_power_ctrl(struct dvb_usb_device *d, int i) { struct dw2102_state *state = (struct dw2102_state *)d->priv; - u8 obuf[] = {0xde, 0}; + int ret = 0; info("%s: %d, initialized %d", __func__, i, state->initialized); if (i && !state->initialized) { + mutex_lock(&d->data_mutex); + + state->data[0] = 0xde; + state->data[1] = 0; + state->initialized = 1; /* reset board */ - return dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0); + ret = dvb_usb_generic_rw(d, state->data, 2, NULL, 0, 0); + mutex_unlock(&d->data_mutex); } - return 0; + return ret; } static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) @@ -1309,49 +1326,57 @@ static int prof_7500_frontend_attach(struct dvb_usb_adapter *d) return 0; } -static int su3000_frontend_attach(struct dvb_usb_adapter *d) +static int su3000_frontend_attach(struct dvb_usb_adapter *adap) { - u8 obuf[3] = { 0xe, 0x80, 0 }; - u8 ibuf[] = { 0 }; + struct dvb_usb_device *d = adap->dev; + struct dw2102_state *state = d->priv; + + mutex_lock(&d->data_mutex); + + state->data[0] = 0xe; + state->data[1] = 0x80; + state->data[2] = 0; - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0xe; - obuf[1] = 0x02; - obuf[2] = 1; + state->data[0] = 0xe; + state->data[1] = 0x02; + state->data[2] = 1; - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); msleep(300); - obuf[0] = 0xe; - obuf[1] = 0x83; - obuf[2] = 0; + state->data[0] = 0xe; + state->data[1] = 0x83; + state->data[2] = 0; - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0xe; - obuf[1] = 0x83; - obuf[2] = 1; + state->data[0] = 0xe; + state->data[1] = 0x83; + state->data[2] = 1; - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0x51; + state->data[0] = 0x51; - if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0) err("command 0x51 transfer failed."); - d->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config, - &d->dev->i2c_adap); - if (d->fe_adap[0].fe == NULL) + mutex_unlock(&d->data_mutex); + + adap->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config, + &d->i2c_adap); + if (adap->fe_adap[0].fe == NULL) return -EIO; - if (dvb_attach(ts2020_attach, d->fe_adap[0].fe, + if (dvb_attach(ts2020_attach, adap->fe_adap[0].fe, &dw2104_ts2020_config, - &d->dev->i2c_adap)) { + &d->i2c_adap)) { info("Attached DS3000/TS2020!"); return 0; } @@ -1360,47 +1385,55 @@ static int su3000_frontend_attach(struct dvb_usb_adapter *d) return -EIO; } -static int t220_frontend_attach(struct dvb_usb_adapter *d) +static int t220_frontend_attach(struct dvb_usb_adapter *adap) { - u8 obuf[3] = { 0xe, 0x87, 0 }; - u8 ibuf[] = { 0 }; + struct dvb_usb_device *d = adap->dev; + struct dw2102_state *state = d->priv; + + mutex_lock(&d->data_mutex); - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + state->data[0] = 0xe; + state->data[1] = 0x87; + state->data[2] = 0x0; + + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0xe; - obuf[1] = 0x86; - obuf[2] = 1; + state->data[0] = 0xe; + state->data[1] = 0x86; + state->data[2] = 1; - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0xe; - obuf[1] = 0x80; - obuf[2] = 0; + state->data[0] = 0xe; + state->data[1] = 0x80; + state->data[2] = 0; - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); msleep(50); - obuf[0] = 0xe; - obuf[1] = 0x80; - obuf[2] = 1; + state->data[0] = 0xe; + state->data[1] = 0x80; + state->data[2] = 1; - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0x51; + state->data[0] = 0x51; - if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0) err("command 0x51 transfer failed."); - d->fe_adap[0].fe = dvb_attach(cxd2820r_attach, &cxd2820r_config, - &d->dev->i2c_adap, NULL); - if (d->fe_adap[0].fe != NULL) { - if (dvb_attach(tda18271_attach, d->fe_adap[0].fe, 0x60, - &d->dev->i2c_adap, &tda18271_config)) { + mutex_unlock(&d->data_mutex); + + adap->fe_adap[0].fe = dvb_attach(cxd2820r_attach, &cxd2820r_config, + &d->i2c_adap, NULL); + if (adap->fe_adap[0].fe != NULL) { + if (dvb_attach(tda18271_attach, adap->fe_adap[0].fe, 0x60, + &d->i2c_adap, &tda18271_config)) { info("Attached TDA18271HD/CXD2820R!"); return 0; } @@ -1410,23 +1443,30 @@ static int t220_frontend_attach(struct dvb_usb_adapter *d) return -EIO; } -static int m88rs2000_frontend_attach(struct dvb_usb_adapter *d) +static int m88rs2000_frontend_attach(struct dvb_usb_adapter *adap) { - u8 obuf[] = { 0x51 }; - u8 ibuf[] = { 0 }; + struct dvb_usb_device *d = adap->dev; + struct dw2102_state *state = d->priv; + + mutex_lock(&d->data_mutex); - if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0) + state->data[0] = 0x51; + + if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0) err("command 0x51 transfer failed."); - d->fe_adap[0].fe = dvb_attach(m88rs2000_attach, &s421_m88rs2000_config, - &d->dev->i2c_adap); + mutex_unlock(&d->data_mutex); - if (d->fe_adap[0].fe == NULL) + adap->fe_adap[0].fe = dvb_attach(m88rs2000_attach, + &s421_m88rs2000_config, + &d->i2c_adap); + + if (adap->fe_adap[0].fe == NULL) return -EIO; - if (dvb_attach(ts2020_attach, d->fe_adap[0].fe, + if (dvb_attach(ts2020_attach, adap->fe_adap[0].fe, &dw2104_ts2020_config, - &d->dev->i2c_adap)) { + &d->i2c_adap)) { info("Attached RS2000/TS2020!"); return 0; } @@ -1439,44 +1479,50 @@ static int tt_s2_4600_frontend_attach(struct dvb_usb_adapter *adap) { struct dvb_usb_device *d = adap->dev; struct dw2102_state *state = d->priv; - u8 obuf[3] = { 0xe, 0x80, 0 }; - u8 ibuf[] = { 0 }; struct i2c_adapter *i2c_adapter; struct i2c_client *client; struct i2c_board_info board_info; struct m88ds3103_platform_data m88ds3103_pdata = {}; struct ts2020_config ts2020_config = {}; - if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0) + mutex_lock(&d->data_mutex); + + state->data[0] = 0xe; + state->data[1] = 0x80; + state->data[2] = 0x0; + + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0xe; - obuf[1] = 0x02; - obuf[2] = 1; + state->data[0] = 0xe; + state->data[1] = 0x02; + state->data[2] = 1; - if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); msleep(300); - obuf[0] = 0xe; - obuf[1] = 0x83; - obuf[2] = 0; + state->data[0] = 0xe; + state->data[1] = 0x83; + state->data[2] = 0; - if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0xe; - obuf[1] = 0x83; - obuf[2] = 1; + state->data[0] = 0xe; + state->data[1] = 0x83; + state->data[2] = 1; - if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0) err("command 0x0e transfer failed."); - obuf[0] = 0x51; + state->data[0] = 0x51; - if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 1, 0) < 0) + if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0) err("command 0x51 transfer failed."); + mutex_unlock(&d->data_mutex); + /* attach demod */ m88ds3103_pdata.clk = 27000000; m88ds3103_pdata.i2c_wr_max = 33; diff --git a/drivers/media/usb/pwc/philips.txt b/drivers/media/usb/pwc/philips.txt deleted file mode 100644 index d38dd791511e..000000000000 --- a/drivers/media/usb/pwc/philips.txt +++ /dev/null @@ -1,236 +0,0 @@ -This file contains some additional information for the Philips and OEM webcams. -E-mail: webcam@smcc.demon.nl Last updated: 2004-01-19 -Site: http://www.smcc.demon.nl/webcam/ - -As of this moment, the following cameras are supported: - * Philips PCA645 - * Philips PCA646 - * Philips PCVC675 - * Philips PCVC680 - * Philips PCVC690 - * Philips PCVC720/40 - * Philips PCVC730 - * Philips PCVC740 - * Philips PCVC750 - * Askey VC010 - * Creative Labs Webcam 5 - * Creative Labs Webcam Pro Ex - * Logitech QuickCam 3000 Pro - * Logitech QuickCam 4000 Pro - * Logitech QuickCam Notebook Pro - * Logitech QuickCam Zoom - * Logitech QuickCam Orbit - * Logitech QuickCam Sphere - * Samsung MPC-C10 - * Samsung MPC-C30 - * Sotec Afina Eye - * AME CU-001 - * Visionite VCS-UM100 - * Visionite VCS-UC300 - -The main webpage for the Philips driver is at the address above. It contains -a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin -contains decompression routines that allow you to use higher image sizes and -framerates; in addition the webcam uses less bandwidth on the USB bus (handy -if you want to run more than 1 camera simultaneously). These routines fall -under a NDA, and may therefore not be distributed as source; however, its use -is completely optional. - -You can build this code either into your kernel, or as a module. I recommend -the latter, since it makes troubleshooting a lot easier. The built-in -microphone is supported through the USB Audio class. - -When you load the module you can set some default settings for the -camera; some programs depend on a particular image-size or -format and -don't know how to set it properly in the driver. The options are: - -size - Can be one of 'sqcif', 'qsif', 'qcif', 'sif', 'cif' or - 'vga', for an image size of resp. 128x96, 160x120, 176x144, - 320x240, 352x288 and 640x480 (of course, only for those cameras that - support these resolutions). - -fps - Specifies the desired framerate. Is an integer in the range of 4-30. - -fbufs - This parameter specifies the number of internal buffers to use for storing - frames from the cam. This will help if the process that reads images from - the cam is a bit slow or momentarily busy. However, on slow machines it - only introduces lag, so choose carefully. The default is 3, which is - reasonable. You can set it between 2 and 5. - -mbufs - This is an integer between 1 and 10. It will tell the module the number of - buffers to reserve for mmap(), VIDIOCCGMBUF, VIDIOCMCAPTURE and friends. - The default is 2, which is adequate for most applications (double - buffering). - - Should you experience a lot of 'Dumping frame...' messages during - grabbing with a tool that uses mmap(), you might want to increase if. - However, it doesn't really buffer images, it just gives you a bit more - slack when your program is behind. But you need a multi-threaded or - forked program to really take advantage of these buffers. - - The absolute maximum is 10, but don't set it too high! Every buffer takes - up 460 KB of RAM, so unless you have a lot of memory setting this to - something more than 4 is an absolute waste. This memory is only - allocated during open(), so nothing is wasted when the camera is not in - use. - -power_save - When power_save is enabled (set to 1), the module will try to shut down - the cam on close() and re-activate on open(). This will save power and - turn off the LED. Not all cameras support this though (the 645 and 646 - don't have power saving at all), and some models don't work either (they - will shut down, but never wake up). Consider this experimental. By - default this option is disabled. - -compression (only useful with the plugin) - With this option you can control the compression factor that the camera - uses to squeeze the image through the USB bus. You can set the - parameter between 0 and 3: - 0 = prefer uncompressed images; if the requested mode is not available - in an uncompressed format, the driver will silently switch to low - compression. - 1 = low compression. - 2 = medium compression. - 3 = high compression. - - High compression takes less bandwidth of course, but it could also - introduce some unwanted artefacts. The default is 2, medium compression. - See the FAQ on the website for an overview of which modes require - compression. - - The compression parameter does not apply to the 645 and 646 cameras - and OEM models derived from those (only a few). Most cams honour this - parameter. - -leds - This settings takes 2 integers, that define the on/off time for the LED - (in milliseconds). One of the interesting things that you can do with - this is let the LED blink while the camera is in use. This: - - leds=500,500 - - will blink the LED once every second. But with: - - leds=0,0 - - the LED never goes on, making it suitable for silent surveillance. - - By default the camera's LED is on solid while in use, and turned off - when the camera is not used anymore. - - This parameter works only with the ToUCam range of cameras (720, 730, 740, - 750) and OEMs. For other cameras this command is silently ignored, and - the LED cannot be controlled. - - Finally: this parameters does not take effect UNTIL the first time you - open the camera device. Until then, the LED remains on. - -dev_hint - A long standing problem with USB devices is their dynamic nature: you - never know what device a camera gets assigned; it depends on module load - order, the hub configuration, the order in which devices are plugged in, - and the phase of the moon (i.e. it can be random). With this option you - can give the driver a hint as to what video device node (/dev/videoX) it - should use with a specific camera. This is also handy if you have two - cameras of the same model. - - A camera is specified by its type (the number from the camera model, - like PCA645, PCVC750VC, etc) and optionally the serial number (visible - in /proc/bus/usb/devices). A hint consists of a string with the following - format: - - [type[.serialnumber]:]node - - The square brackets mean that both the type and the serialnumber are - optional, but a serialnumber cannot be specified without a type (which - would be rather pointless). The serialnumber is separated from the type - by a '.'; the node number by a ':'. - - This somewhat cryptic syntax is best explained by a few examples: - - dev_hint=3,5 The first detected cam gets assigned - /dev/video3, the second /dev/video5. Any - other cameras will get the first free - available slot (see below). - - dev_hint=645:1,680:2 The PCA645 camera will get /dev/video1, - and a PCVC680 /dev/video2. - - dev_hint=645.0123:3,645.4567:0 The PCA645 camera with serialnumber - 0123 goes to /dev/video3, the same - camera model with the 4567 serial - gets /dev/video0. - - dev_hint=750:1,4,5,6 The PCVC750 camera will get /dev/video1, the - next 3 Philips cams will use /dev/video4 - through /dev/video6. - - Some points worth knowing: - - Serialnumbers are case sensitive and must be written full, including - leading zeroes (it's treated as a string). - - If a device node is already occupied, registration will fail and - the webcam is not available. - - You can have up to 64 video devices; be sure to make enough device - nodes in /dev if you want to spread the numbers. - After /dev/video9 comes /dev/video10 (not /dev/videoA). - - If a camera does not match any dev_hint, it will simply get assigned - the first available device node, just as it used to be. - -trace - In order to better detect problems, it is now possible to turn on a - 'trace' of some of the calls the module makes; it logs all items in your - kernel log at debug level. - - The trace variable is a bitmask; each bit represents a certain feature. - If you want to trace something, look up the bit value(s) in the table - below, add the values together and supply that to the trace variable. - - Value Value Description Default - (dec) (hex) - 1 0x1 Module initialization; this will log messages On - while loading and unloading the module - - 2 0x2 probe() and disconnect() traces On - - 4 0x4 Trace open() and close() calls Off - - 8 0x8 read(), mmap() and associated ioctl() calls Off - - 16 0x10 Memory allocation of buffers, etc. Off - - 32 0x20 Showing underflow, overflow and Dumping frame On - messages - - 64 0x40 Show viewport and image sizes Off - - 128 0x80 PWCX debugging Off - - For example, to trace the open() & read() functions, sum 8 + 4 = 12, - so you would supply trace=12 during insmod or modprobe. If - you want to turn the initialization and probing tracing off, set trace=0. - The default value for trace is 35 (0x23). - - - -Example: - - # modprobe pwc size=cif fps=15 power_save=1 - -The fbufs, mbufs and trace parameters are global and apply to all connected -cameras. Each camera has its own set of buffers. - -size and fps only specify defaults when you open() the device; this is to -accommodate some tools that don't set the size. You can change these -settings after open() with the Video4Linux ioctl() calls. The default of -defaults is QCIF size at 10 fps. - -The compression parameter is semiglobal; it sets the initial compression -preference for all camera's, but this parameter can be set per camera with -the VIDIOCPWCSCQUAL ioctl() call. - -All parameters are optional. - diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c b/drivers/media/v4l2-core/videobuf2-dma-contig.c index fb6a177be461..2db0413f5d57 100644 --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c @@ -356,8 +356,8 @@ static struct dma_buf_ops vb2_dc_dmabuf_ops = { .detach = vb2_dc_dmabuf_ops_detach, .map_dma_buf = vb2_dc_dmabuf_ops_map, .unmap_dma_buf = vb2_dc_dmabuf_ops_unmap, - .kmap = vb2_dc_dmabuf_ops_kmap, - .kmap_atomic = vb2_dc_dmabuf_ops_kmap, + .map = vb2_dc_dmabuf_ops_kmap, + .map_atomic = vb2_dc_dmabuf_ops_kmap, .vmap = vb2_dc_dmabuf_ops_vmap, .mmap = vb2_dc_dmabuf_ops_mmap, .release = vb2_dc_dmabuf_ops_release, diff --git a/drivers/media/v4l2-core/videobuf2-dma-sg.c b/drivers/media/v4l2-core/videobuf2-dma-sg.c index ecff8f492c4f..6fd1343b7c13 100644 --- a/drivers/media/v4l2-core/videobuf2-dma-sg.c +++ b/drivers/media/v4l2-core/videobuf2-dma-sg.c @@ -504,8 +504,8 @@ static struct dma_buf_ops vb2_dma_sg_dmabuf_ops = { .detach = vb2_dma_sg_dmabuf_ops_detach, .map_dma_buf = vb2_dma_sg_dmabuf_ops_map, .unmap_dma_buf = vb2_dma_sg_dmabuf_ops_unmap, - .kmap = vb2_dma_sg_dmabuf_ops_kmap, - .kmap_atomic = vb2_dma_sg_dmabuf_ops_kmap, + .map = vb2_dma_sg_dmabuf_ops_kmap, + .map_atomic = vb2_dma_sg_dmabuf_ops_kmap, .vmap = vb2_dma_sg_dmabuf_ops_vmap, .mmap = vb2_dma_sg_dmabuf_ops_mmap, .release = vb2_dma_sg_dmabuf_ops_release, diff --git a/drivers/media/v4l2-core/videobuf2-vmalloc.c b/drivers/media/v4l2-core/videobuf2-vmalloc.c index 3f778147cdef..27d1db3bb8cf 100644 --- a/drivers/media/v4l2-core/videobuf2-vmalloc.c +++ b/drivers/media/v4l2-core/videobuf2-vmalloc.c @@ -342,8 +342,8 @@ static struct dma_buf_ops vb2_vmalloc_dmabuf_ops = { .detach = vb2_vmalloc_dmabuf_ops_detach, .map_dma_buf = vb2_vmalloc_dmabuf_ops_map, .unmap_dma_buf = vb2_vmalloc_dmabuf_ops_unmap, - .kmap = vb2_vmalloc_dmabuf_ops_kmap, - .kmap_atomic = vb2_vmalloc_dmabuf_ops_kmap, + .map = vb2_vmalloc_dmabuf_ops_kmap, + .map_atomic = vb2_vmalloc_dmabuf_ops_kmap, .vmap = vb2_vmalloc_dmabuf_ops_vmap, .mmap = vb2_vmalloc_dmabuf_ops_mmap, .release = vb2_vmalloc_dmabuf_ops_release, |
