2 files changed, 44 insertions, 23 deletions

diff --git a/drivers/input/mouse/elan_i2c_i2c.c b/drivers/input/mouse/elan_i2c_i2c.c
index a679e56c44cd..f431da07f861 100644
--- a/drivers/input/mouse/elan_i2c_i2c.c
+++ b/drivers/input/mouse/elan_i2c_i2c.c
@@ -554,32 +554,34 @@ static int elan_i2c_finish_fw_update(struct i2c_client *client,
 				     struct completion *completion)
 {
 	struct device *dev = &client->dev;
-	long ret;
 	int error;
 	int len;
-	u8 buffer[ETP_I2C_INF_LENGTH];
+	u8 buffer[ETP_I2C_REPORT_LEN];
+
+	len = i2c_master_recv(client, buffer, ETP_I2C_REPORT_LEN);
+	if (len != ETP_I2C_REPORT_LEN) {
+		error = len < 0 ? len : -EIO;
+		dev_warn(dev, "failed to read I2C data after FW WDT reset: %d (%d)\n",
+			error, len);
+	}
 
 	reinit_completion(completion);
 	enable_irq(client->irq);
 
 	error = elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, ETP_I2C_RESET);
-	if (!error)
-		ret = wait_for_completion_interruptible_timeout(completion,
-							msecs_to_jiffies(300));
-	disable_irq(client->irq);
-
 	if (error) {
 		dev_err(dev, "device reset failed: %d\n", error);
-		return error;
-	} else if (ret == 0) {
+	} else if (!wait_for_completion_timeout(completion,
+						msecs_to_jiffies(300))) {
 		dev_err(dev, "timeout waiting for device reset\n");
-		return -ETIMEDOUT;
-	} else if (ret < 0) {
-		error = ret;
-		dev_err(dev, "error waiting for device reset: %d\n", error);
-		return error;
+		error = -ETIMEDOUT;
 	}
 
+	disable_irq(client->irq);
+
+	if (error)
+		return error;
+
 	len = i2c_master_recv(client, buffer, ETP_I2C_INF_LENGTH);
 	if (len != ETP_I2C_INF_LENGTH) {
 		error = len < 0 ? len : -EIO;
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 131df9d3660f..16c30460ef04 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -176,6 +176,12 @@ static const char * const smbus_pnp_ids[] = {
 	NULL
 };
 
+static const char * const forcepad_pnp_ids[] = {
+	"SYN300D",
+	"SYN3014",
+	NULL
+};
+
 /*
  * Send a command to the synpatics touchpad by special commands
  */
@@ -397,6 +403,8 @@ static int synaptics_query_hardware(struct psmouse *psmouse,
 {
 	int error;
 
+	memset(info, 0, sizeof(*info));
+
 	error = synaptics_identify(psmouse, info);
 	if (error)
 		return error;
@@ -480,13 +488,6 @@ static const struct min_max_quirk min_max_pnpid_table[] = {
 	{ }
 };
 
-/* This list has been kindly provided by Synaptics. */
-static const char * const forcepad_pnp_ids[] = {
-	"SYN300D",
-	"SYN3014",
-	NULL
-};
-
 /*****************************************************************************
  *	Synaptics communications functions
  ****************************************************************************/
@@ -1687,7 +1688,8 @@ enum {
 	SYNAPTICS_INTERTOUCH_ON,
 };
 
-static int synaptics_intertouch = SYNAPTICS_INTERTOUCH_NOT_SET;
+static int synaptics_intertouch = IS_ENABLED(CONFIG_RMI4_SMB) ?
+		SYNAPTICS_INTERTOUCH_NOT_SET : SYNAPTICS_INTERTOUCH_OFF;
 module_param_named(synaptics_intertouch, synaptics_intertouch, int, 0644);
 MODULE_PARM_DESC(synaptics_intertouch, "Use a secondary bus for the Synaptics device.");
 
@@ -1737,8 +1739,16 @@ static int synaptics_setup_intertouch(struct psmouse *psmouse,
 
 	if (synaptics_intertouch == SYNAPTICS_INTERTOUCH_NOT_SET) {
 		if (!psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) &&
-		    !psmouse_matches_pnp_id(psmouse, smbus_pnp_ids))
+		    !psmouse_matches_pnp_id(psmouse, smbus_pnp_ids)) {
+
+			if (!psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids))
+				psmouse_info(psmouse,
+					     "Your touchpad (%s) says it can support a different bus. "
+					     "If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.\n",
+					     psmouse->ps2dev.serio->firmware_id);
+
 			return -ENXIO;
+		}
 	}
 
 	psmouse_info(psmouse, "Trying to set up SMBus access\n");
@@ -1810,6 +1820,15 @@ int synaptics_init(struct psmouse *psmouse)
 	}
 
 	if (SYN_CAP_INTERTOUCH(info.ext_cap_0c)) {
+		if ((!IS_ENABLED(CONFIG_RMI4_SMB) ||
+		     !IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS)) &&
+		    /* Forcepads need F21, which is not ready */
+		    !psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids)) {
+			psmouse_warn(psmouse,
+				     "The touchpad can support a better bus than the too old PS/2 protocol. "
+				     "Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.\n");
+		}
+
 		error = synaptics_setup_intertouch(psmouse, &info, true);
 		if (!error)
 			return PSMOUSE_SYNAPTICS_SMBUS;