summaryrefslogtreecommitdiffstats
path: root/drivers/ide/via82cxxx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/via82cxxx.c')
-rw-r--r--drivers/ide/via82cxxx.c514
1 files changed, 514 insertions, 0 deletions
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
new file mode 100644
index 000000000000..2a812d3207e9
--- /dev/null
+++ b/drivers/ide/via82cxxx.c
@@ -0,0 +1,514 @@
+/*
+ * VIA IDE driver for Linux. Supported southbridges:
+ *
+ * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
+ * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
+ * vt8235, vt8237, vt8237a
+ *
+ * Copyright (c) 2000-2002 Vojtech Pavlik
+ * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
+ *
+ * Based on the work of:
+ * Michel Aubry
+ * Jeff Garzik
+ * Andre Hedrick
+ *
+ * Documentation:
+ * Obsolete device documentation publically available from via.com.tw
+ * Current device documentation available under NDA only
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+#include <linux/dmi.h>
+
+#ifdef CONFIG_PPC_CHRP
+#include <asm/processor.h>
+#endif
+
+#define DRV_NAME "via82cxxx"
+
+#define VIA_IDE_ENABLE 0x40
+#define VIA_IDE_CONFIG 0x41
+#define VIA_FIFO_CONFIG 0x43
+#define VIA_MISC_1 0x44
+#define VIA_MISC_2 0x45
+#define VIA_MISC_3 0x46
+#define VIA_DRIVE_TIMING 0x48
+#define VIA_8BIT_TIMING 0x4e
+#define VIA_ADDRESS_SETUP 0x4c
+#define VIA_UDMA_TIMING 0x50
+
+#define VIA_BAD_PREQ 0x01 /* Crashes if PREQ# till DDACK# set */
+#define VIA_BAD_CLK66 0x02 /* 66 MHz clock doesn't work correctly */
+#define VIA_SET_FIFO 0x04 /* Needs to have FIFO split set */
+#define VIA_NO_UNMASK 0x08 /* Doesn't work with IRQ unmasking on */
+#define VIA_BAD_ID 0x10 /* Has wrong vendor ID (0x1107) */
+#define VIA_BAD_AST 0x20 /* Don't touch Address Setup Timing */
+
+/*
+ * VIA SouthBridge chips.
+ */
+
+static struct via_isa_bridge {
+ char *name;
+ u16 id;
+ u8 rev_min;
+ u8 rev_max;
+ u8 udma_mask;
+ u8 flags;
+} via_isa_bridges[] = {
+ { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, },
+ { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, },
+ { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, },
+ { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, },
+ { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, },
+ { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
+ { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, },
+ { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO },
+ { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO },
+ { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO },
+ { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
+ { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+ { NULL }
+};
+
+static unsigned int via_clock;
+static char *via_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
+
+struct via82cxxx_dev
+{
+ struct via_isa_bridge *via_config;
+ unsigned int via_80w;
+};
+
+/**
+ * via_set_speed - write timing registers
+ * @dev: PCI device
+ * @dn: device
+ * @timing: IDE timing data to use
+ *
+ * via_set_speed writes timing values to the chipset registers
+ */
+
+static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct ide_host *host = pci_get_drvdata(dev);
+ struct via82cxxx_dev *vdev = host->host_priv;
+ u8 t;
+
+ if (~vdev->via_config->flags & VIA_BAD_AST) {
+ pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
+ t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
+ pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
+ }
+
+ pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)),
+ ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));
+
+ pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
+ ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));
+
+ switch (vdev->via_config->udma_mask) {
+ case ATA_UDMA2: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
+ case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break;
+ case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
+ case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
+ default: return;
+ }
+
+ pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t);
+}
+
+/**
+ * via_set_drive - configure transfer mode
+ * @drive: Drive to set up
+ * @speed: desired speed
+ *
+ * via_set_drive() computes timing values configures the chipset to
+ * a desired transfer mode. It also can be called by upper layers.
+ */
+
+static void via_set_drive(ide_drive_t *drive, const u8 speed)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ ide_drive_t *peer = ide_get_pair_dev(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct ide_host *host = pci_get_drvdata(dev);
+ struct via82cxxx_dev *vdev = host->host_priv;
+ struct ide_timing t, p;
+ unsigned int T, UT;
+
+ T = 1000000000 / via_clock;
+
+ switch (vdev->via_config->udma_mask) {
+ case ATA_UDMA2: UT = T; break;
+ case ATA_UDMA4: UT = T/2; break;
+ case ATA_UDMA5: UT = T/3; break;
+ case ATA_UDMA6: UT = T/4; break;
+ default: UT = T;
+ }
+
+ ide_timing_compute(drive, speed, &t, T, UT);
+
+ if (peer) {
+ ide_timing_compute(peer, peer->current_speed, &p, T, UT);
+ ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
+ }
+
+ via_set_speed(HWIF(drive), drive->dn, &t);
+}
+
+/**
+ * via_set_pio_mode - set host controller for PIO mode
+ * @drive: drive
+ * @pio: PIO mode number
+ *
+ * A callback from the upper layers for PIO-only tuning.
+ */
+
+static void via_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+ via_set_drive(drive, XFER_PIO_0 + pio);
+}
+
+static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
+{
+ struct via_isa_bridge *via_config;
+
+ for (via_config = via_isa_bridges; via_config->id; via_config++)
+ if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA +
+ !!(via_config->flags & VIA_BAD_ID),
+ via_config->id, NULL))) {
+
+ if ((*isa)->revision >= via_config->rev_min &&
+ (*isa)->revision <= via_config->rev_max)
+ break;
+ pci_dev_put(*isa);
+ }
+
+ return via_config;
+}
+
+/*
+ * Check and handle 80-wire cable presence
+ */
+static void via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
+{
+ int i;
+
+ switch (vdev->via_config->udma_mask) {
+ case ATA_UDMA4:
+ for (i = 24; i >= 0; i -= 8)
+ if (((u >> (i & 16)) & 8) &&
+ ((u >> i) & 0x20) &&
+ (((u >> i) & 7) < 2)) {
+ /*
+ * 2x PCI clock and
+ * UDMA w/ < 3T/cycle
+ */
+ vdev->via_80w |= (1 << (1 - (i >> 4)));
+ }
+ break;
+
+ case ATA_UDMA5:
+ for (i = 24; i >= 0; i -= 8)
+ if (((u >> i) & 0x10) ||
+ (((u >> i) & 0x20) &&
+ (((u >> i) & 7) < 4))) {
+ /* BIOS 80-wire bit or
+ * UDMA w/ < 60ns/cycle
+ */
+ vdev->via_80w |= (1 << (1 - (i >> 4)));
+ }
+ break;
+
+ case ATA_UDMA6:
+ for (i = 24; i >= 0; i -= 8)
+ if (((u >> i) & 0x10) ||
+ (((u >> i) & 0x20) &&
+ (((u >> i) & 7) < 6))) {
+ /* BIOS 80-wire bit or
+ * UDMA w/ < 60ns/cycle
+ */
+ vdev->via_80w |= (1 << (1 - (i >> 4)));
+ }
+ break;
+ }
+}
+
+/**
+ * init_chipset_via82cxxx - initialization handler
+ * @dev: PCI device
+ *
+ * The initialization callback. Here we determine the IDE chip type
+ * and initialize its drive independent registers.
+ */
+
+static unsigned int init_chipset_via82cxxx(struct pci_dev *dev)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+ struct via82cxxx_dev *vdev = host->host_priv;
+ struct via_isa_bridge *via_config = vdev->via_config;
+ u8 t, v;
+ u32 u;
+
+ /*
+ * Detect cable and configure Clk66
+ */
+ pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
+
+ via_cable_detect(vdev, u);
+
+ if (via_config->udma_mask == ATA_UDMA4) {
+ /* Enable Clk66 */
+ pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
+ } else if (via_config->flags & VIA_BAD_CLK66) {
+ /* Would cause trouble on 596a and 686 */
+ pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
+ }
+
+ /*
+ * Check whether interfaces are enabled.
+ */
+
+ pci_read_config_byte(dev, VIA_IDE_ENABLE, &v);
+
+ /*
+ * Set up FIFO sizes and thresholds.
+ */
+
+ pci_read_config_byte(dev, VIA_FIFO_CONFIG, &t);
+
+ /* Disable PREQ# till DDACK# */
+ if (via_config->flags & VIA_BAD_PREQ) {
+ /* Would crash on 586b rev 41 */
+ t &= 0x7f;
+ }
+
+ /* Fix FIFO split between channels */
+ if (via_config->flags & VIA_SET_FIFO) {
+ t &= (t & 0x9f);
+ switch (v & 3) {
+ case 2: t |= 0x00; break; /* 16 on primary */
+ case 1: t |= 0x60; break; /* 16 on secondary */
+ case 3: t |= 0x20; break; /* 8 pri 8 sec */
+ }
+ }
+
+ pci_write_config_byte(dev, VIA_FIFO_CONFIG, t);
+
+ return 0;
+}
+
+/*
+ * Cable special cases
+ */
+
+static const struct dmi_system_id cable_dmi_table[] = {
+ {
+ .ident = "Acer Ferrari 3400",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."),
+ DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"),
+ },
+ },
+ { }
+};
+
+static int via_cable_override(struct pci_dev *pdev)
+{
+ /* Systems by DMI */
+ if (dmi_check_system(cable_dmi_table))
+ return 1;
+
+ /* Arima W730-K8/Targa Visionary 811/... */
+ if (pdev->subsystem_vendor == 0x161F &&
+ pdev->subsystem_device == 0x2032)
+ return 1;
+
+ return 0;
+}
+
+static u8 via82cxxx_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
+ struct ide_host *host = pci_get_drvdata(pdev);
+ struct via82cxxx_dev *vdev = host->host_priv;
+
+ if (via_cable_override(pdev))
+ return ATA_CBL_PATA40_SHORT;
+
+ if ((vdev->via_80w >> hwif->channel) & 1)
+ return ATA_CBL_PATA80;
+ else
+ return ATA_CBL_PATA40;
+}
+
+static const struct ide_port_ops via_port_ops = {
+ .set_pio_mode = via_set_pio_mode,
+ .set_dma_mode = via_set_drive,
+ .cable_detect = via82cxxx_cable_detect,
+};
+
+static const struct ide_port_info via82cxxx_chipset __devinitdata = {
+ .name = DRV_NAME,
+ .init_chipset = init_chipset_via82cxxx,
+ .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
+ .port_ops = &via_port_ops,
+ .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST |
+ IDE_HFLAG_POST_SET_MODE |
+ IDE_HFLAG_IO_32BIT,
+ .pio_mask = ATA_PIO5,
+ .swdma_mask = ATA_SWDMA2,
+ .mwdma_mask = ATA_MWDMA2,
+};
+
+static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ struct pci_dev *isa = NULL;
+ struct via_isa_bridge *via_config;
+ struct via82cxxx_dev *vdev;
+ int rc;
+ u8 idx = id->driver_data;
+ struct ide_port_info d;
+
+ d = via82cxxx_chipset;
+
+ /*
+ * Find the ISA bridge and check we know what it is.
+ */
+ via_config = via_config_find(&isa);
+ if (!via_config->id) {
+ printk(KERN_WARNING DRV_NAME " %s: unknown chipset, skipping\n",
+ pci_name(dev));
+ return -ENODEV;
+ }
+
+ /*
+ * Print the boot message.
+ */
+ printk(KERN_INFO DRV_NAME " %s: VIA %s (rev %02x) IDE %sDMA%s\n",
+ pci_name(dev), via_config->name, isa->revision,
+ via_config->udma_mask ? "U" : "MW",
+ via_dma[via_config->udma_mask ?
+ (fls(via_config->udma_mask) - 1) : 0]);
+
+ pci_dev_put(isa);
+
+ /*
+ * Determine system bus clock.
+ */
+ via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
+
+ switch (via_clock) {
+ case 33000: via_clock = 33333; break;
+ case 37000: via_clock = 37500; break;
+ case 41000: via_clock = 41666; break;
+ }
+
+ if (via_clock < 20000 || via_clock > 50000) {
+ printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
+ "impossible (%d), using 33 MHz instead.\n", via_clock);
+ printk(KERN_WARNING DRV_NAME ": Use ide0=ata66 if you want "
+ "to assume 80-wire cable.\n");
+ via_clock = 33333;
+ }
+
+ if (idx == 0)
+ d.host_flags |= IDE_HFLAG_NO_AUTODMA;
+ else
+ d.enablebits[1].reg = d.enablebits[0].reg = 0;
+
+ if ((via_config->flags & VIA_NO_UNMASK) == 0)
+ d.host_flags |= IDE_HFLAG_UNMASK_IRQS;
+
+#ifdef CONFIG_PPC_CHRP
+ if (machine_is(chrp) && _chrp_type == _CHRP_Pegasos)
+ d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
+#endif
+
+ d.udma_mask = via_config->udma_mask;
+
+ vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
+ if (!vdev) {
+ printk(KERN_ERR DRV_NAME " %s: out of memory :(\n",
+ pci_name(dev));
+ return -ENOMEM;
+ }
+
+ vdev->via_config = via_config;
+
+ rc = ide_pci_init_one(dev, &d, vdev);
+ if (rc)
+ kfree(vdev);
+
+ return rc;
+}
+
+static void __devexit via_remove(struct pci_dev *dev)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+ struct via82cxxx_dev *vdev = host->host_priv;
+
+ ide_pci_remove(dev);
+ kfree(vdev);
+}
+
+static const struct pci_device_id via_pci_tbl[] = {
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, via_pci_tbl);
+
+static struct pci_driver via_pci_driver = {
+ .name = "VIA_IDE",
+ .id_table = via_pci_tbl,
+ .probe = via_init_one,
+ .remove = __devexit_p(via_remove),
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
+};
+
+static int __init via_ide_init(void)
+{
+ return ide_pci_register_driver(&via_pci_driver);
+}
+
+static void __exit via_ide_exit(void)
+{
+ pci_unregister_driver(&via_pci_driver);
+}
+
+module_init(via_ide_init);
+module_exit(via_ide_exit);
+
+MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick");
+MODULE_DESCRIPTION("PCI driver module for VIA IDE");
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud