summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-acorn.c1
-rw-r--r--drivers/i2c/busses/i2c-ali1535.c1
-rw-r--r--drivers/i2c/busses/i2c-ali1563.c1
-rw-r--r--drivers/i2c/busses/i2c-ali15x3.c1
-rw-r--r--drivers/i2c/busses/i2c-amd756.c1
-rw-r--r--drivers/i2c/busses/i2c-amd8111.c1
-rw-r--r--drivers/i2c/busses/i2c-au1550.c1
-rw-r--r--drivers/i2c/busses/i2c-bfin-twi.c1
-rw-r--r--drivers/i2c/busses/i2c-elektor.c1
-rw-r--r--drivers/i2c/busses/i2c-hydra.c1
-rw-r--r--drivers/i2c/busses/i2c-i801.c1
-rw-r--r--drivers/i2c/busses/i2c-ibm_iic.c1
-rw-r--r--drivers/i2c/busses/i2c-iop3xx.c1
-rw-r--r--drivers/i2c/busses/i2c-ixp2000.c1
-rw-r--r--drivers/i2c/busses/i2c-mpc.c1
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c1
-rw-r--r--drivers/i2c/busses/i2c-nforce2.c1
-rw-r--r--drivers/i2c/busses/i2c-parport-light.c1
-rw-r--r--drivers/i2c/busses/i2c-parport.c1
-rw-r--r--drivers/i2c/busses/i2c-pca-isa.c1
-rw-r--r--drivers/i2c/busses/i2c-piix4.c1
-rw-r--r--drivers/i2c/busses/i2c-sibyte.c2
-rw-r--r--drivers/i2c/busses/i2c-sis5595.c1
-rw-r--r--drivers/i2c/busses/i2c-sis630.c1
-rw-r--r--drivers/i2c/busses/i2c-sis96x.c1
-rw-r--r--drivers/i2c/busses/i2c-via.c1
-rw-r--r--drivers/i2c/busses/i2c-viapro.c1
-rw-r--r--drivers/i2c/busses/i2c-voodoo3.c2
-rw-r--r--drivers/i2c/busses/scx200_acb.c1
-rw-r--r--drivers/i2c/busses/scx200_i2c.c1
-rw-r--r--drivers/i2c/chips/Kconfig37
-rw-r--r--drivers/i2c/chips/Makefile2
-rw-r--r--drivers/i2c/chips/at24.c582
-rw-r--r--drivers/i2c/chips/eeprom.c257
34 files changed, 0 insertions, 910 deletions
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 75089febbc13..9fee3ca17344 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -83,7 +83,6 @@ static struct i2c_algo_bit_data ioc_data = {
};
static struct i2c_adapter ioc_ops = {
- .id = I2C_HW_B_IOC,
.algo_data = &ioc_data,
};
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 9cead9b9458e..981e080b32ae 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -476,7 +476,6 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter ali1535_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_ALI1535,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index dd9e796fad69..f70f46582c6c 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -386,7 +386,6 @@ static const struct i2c_algorithm ali1563_algorithm = {
static struct i2c_adapter ali1563_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_ALI1563,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &ali1563_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 234fdde7d40e..39066dee46e3 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -473,7 +473,6 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter ali15x3_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_ALI15X3,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 36bee5b9c952..220f4a1eee1d 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -298,7 +298,6 @@ static const struct i2c_algorithm smbus_algorithm = {
struct i2c_adapter amd756_smbus = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_AMD756,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 3972208876b3..edab51973bf5 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -387,7 +387,6 @@ static int __devinit amd8111_probe(struct pci_dev *dev,
smbus->adapter.owner = THIS_MODULE;
snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
"SMBus2 AMD8111 adapter at %04x", smbus->base);
- smbus->adapter.id = I2C_HW_SMBUS_AMD8111;
smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 66a04c2c660f..f78ce523e3db 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -400,7 +400,6 @@ i2c_au1550_probe(struct platform_device *pdev)
priv->xfer_timeout = 200;
priv->ack_timeout = 200;
- priv->adap.id = I2C_HW_AU1550_PSC;
priv->adap.nr = pdev->id;
priv->adap.algo = &au1550_algo;
priv->adap.algo_data = priv;
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 3fd2c417c1e0..fc548b3d002e 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -651,7 +651,6 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
iface->timeout_timer.data = (unsigned long)iface;
p_adap = &iface->adap;
- p_adap->id = I2C_HW_BLACKFIN;
p_adap->nr = pdev->id;
strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
p_adap->algo = &bfin_twi_algorithm;
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 0ed3ccb81b63..448b4bf35eb7 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -202,7 +202,6 @@ static struct i2c_algo_pcf_data pcf_isa_data = {
static struct i2c_adapter pcf_isa_ops = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
- .id = I2C_HW_P_ELEK,
.algo_data = &pcf_isa_data,
.name = "i2c-elektor",
};
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index 648aa7baff83..bec9b845dd16 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -102,7 +102,6 @@ static struct i2c_algo_bit_data hydra_bit_data = {
static struct i2c_adapter hydra_adap = {
.owner = THIS_MODULE,
.name = "Hydra i2c",
- .id = I2C_HW_B_HYDRA,
.algo_data = &hydra_bit_data,
};
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 526625eaa84b..230238df56c4 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -556,7 +556,6 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter i801_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_I801,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 651f2f1ae5b7..88f0db73b364 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -746,7 +746,6 @@ static int __devinit iic_probe(struct of_device *ofdev,
adap->dev.parent = &ofdev->dev;
strlcpy(adap->name, "IBM IIC", sizeof(adap->name));
i2c_set_adapdata(adap, dev);
- adap->id = I2C_HW_OCP;
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->algo = &iic_algo;
adap->timeout = 1;
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index fc2714ac0c0f..3190690c26ce 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -480,7 +480,6 @@ iop3xx_i2c_probe(struct platform_device *pdev)
}
memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
- new_adapter->id = I2C_HW_IOP3XX;
new_adapter->owner = THIS_MODULE;
new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
new_adapter->dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 05d72e981353..8e8467970481 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -116,7 +116,6 @@ static int ixp2000_i2c_probe(struct platform_device *plat_dev)
drv_data->algo_data.udelay = 6;
drv_data->algo_data.timeout = 100;
- drv_data->adapter.id = I2C_HW_B_IXP2000,
strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
sizeof(drv_data->adapter.name));
drv_data->adapter.algo_data = &drv_data->algo_data,
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index a9a45fcc8544..aedbbe6618db 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -310,7 +310,6 @@ static const struct i2c_algorithm mpc_algo = {
static struct i2c_adapter mpc_ops = {
.owner = THIS_MODULE,
.name = "MPC adapter",
- .id = I2C_HW_MPC107,
.algo = &mpc_algo,
.timeout = 1,
};
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 9e8118d2fe64..eeda276f8f16 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -527,7 +527,6 @@ mv64xxx_i2c_probe(struct platform_device *pd)
goto exit_unmap_regs;
}
drv_data->adapter.dev.parent = &pd->dev;
- drv_data->adapter.id = I2C_HW_MV64XXX;
drv_data->adapter.algo = &mv64xxx_i2c_algo;
drv_data->adapter.owner = THIS_MODULE;
drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 3b19bc41a60b..05af6cd7f270 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -355,7 +355,6 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar,
return -EBUSY;
}
smbus->adapter.owner = THIS_MODULE;
- smbus->adapter.id = I2C_HW_SMBUS_NFORCE2;
smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index b2b8380f6602..322c5691e38e 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -115,7 +115,6 @@ static struct i2c_algo_bit_data parport_algo_data = {
static struct i2c_adapter parport_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
- .id = I2C_HW_B_LP,
.algo_data = &parport_algo_data,
.name = "Parallel port adapter (light)",
};
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index a257cd5cd134..0d8998610c74 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -164,7 +164,6 @@ static void i2c_parport_attach (struct parport *port)
/* Fill the rest of the structure */
adapter->adapter.owner = THIS_MODULE;
adapter->adapter.class = I2C_CLASS_HWMON;
- adapter->adapter.id = I2C_HW_B_LP;
strlcpy(adapter->adapter.name, "Parallel port adapter",
sizeof(adapter->adapter.name));
adapter->algo_data = parport_algo_data;
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 9eb76268ec78..4aa8138cb0a9 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -101,7 +101,6 @@ static struct i2c_algo_pca_data pca_isa_data = {
static struct i2c_adapter pca_isa_ops = {
.owner = THIS_MODULE,
- .id = I2C_HW_A_ISA,
.algo_data = &pca_isa_data,
.name = "PCA9564 ISA Adapter",
.timeout = 100,
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index eaa9b387543e..761f9dd53620 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -403,7 +403,6 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter piix4_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_PIIX4,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 4ddefbf238e9..98b1ec489159 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -155,7 +155,6 @@ static struct i2c_algo_sibyte_data sibyte_board_data[2] = {
static struct i2c_adapter sibyte_board_adapter[2] = {
{
.owner = THIS_MODULE,
- .id = I2C_HW_SIBYTE,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = NULL,
.algo_data = &sibyte_board_data[0],
@@ -164,7 +163,6 @@ static struct i2c_adapter sibyte_board_adapter[2] = {
},
{
.owner = THIS_MODULE,
- .id = I2C_HW_SIBYTE,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = NULL,
.algo_data = &sibyte_board_data[1],
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 8ce2daff985c..f320ab27da46 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -365,7 +365,6 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter sis5595_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_SIS5595,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 9c9c016ff2b5..50c3610e6028 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -464,7 +464,6 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter sis630_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_SIS630,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index f1bba6396641..7e1594b40579 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -241,7 +241,6 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter sis96x_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_SIS96X,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 29cef0433f34..8b24f192103a 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -83,7 +83,6 @@ static struct i2c_algo_bit_data bit_data = {
static struct i2c_adapter vt586b_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_B_VIA,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.name = "VIA i2c",
.algo_data = &bit_data,
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 9f194d9efd91..02e6f724b05f 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -321,7 +321,6 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter vt596_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_VIA2,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index 1d4ae26ba73d..1a474acc0ddd 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -163,7 +163,6 @@ static struct i2c_algo_bit_data voo_i2c_bit_data = {
static struct i2c_adapter voodoo3_i2c_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_B_VOO,
.class = I2C_CLASS_TV_ANALOG,
.name = "I2C Voodoo3/Banshee adapter",
.algo_data = &voo_i2c_bit_data,
@@ -180,7 +179,6 @@ static struct i2c_algo_bit_data voo_ddc_bit_data = {
static struct i2c_adapter voodoo3_ddc_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_B_VOO,
.class = I2C_CLASS_DDC,
.name = "DDC Voodoo3/Banshee adapter",
.algo_data = &voo_ddc_bit_data,
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index ed794b145a11..648ecc6f60e6 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -440,7 +440,6 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text,
i2c_set_adapdata(adapter, iface);
snprintf(adapter->name, sizeof(adapter->name), "%s ACB%d", text, index);
adapter->owner = THIS_MODULE;
- adapter->id = I2C_HW_SMBUS_SCX200;
adapter->algo = &scx200_acb_algorithm;
adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adapter->dev.parent = dev;
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
index e4c98539c517..162b74a04886 100644
--- a/drivers/i2c/busses/scx200_i2c.c
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -82,7 +82,6 @@ static struct i2c_algo_bit_data scx200_i2c_data = {
static struct i2c_adapter scx200_i2c_ops = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
- .id = I2C_HW_B_SCX200,
.algo_data = &scx200_i2c_data,
.name = "NatSemi SCx200 I2C",
};
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index b9bef04b7be4..c80312c1f382 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -16,43 +16,6 @@ config DS1682
This driver can also be built as a module. If so, the module
will be called ds1682.
-config AT24
- tristate "EEPROMs from most vendors"
- depends on SYSFS && EXPERIMENTAL
- help
- Enable this driver to get read/write support to most I2C EEPROMs,
- after you configure the driver to know about each EEPROM on
- your target board. Use these generic chip names, instead of
- vendor-specific ones like at24c64 or 24lc02:
-
- 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
- 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
-
- Unless you like data loss puzzles, always be sure that any chip
- you configure as a 24c32 (32 kbit) or larger is NOT really a
- 24c16 (16 kbit) or smaller, and vice versa. Marking the chip
- as read-only won't help recover from this. Also, if your chip
- has any software write-protect mechanism you may want to review the
- code to make sure this driver won't turn it on by accident.
-
- If you use this with an SMBus adapter instead of an I2C adapter,
- full functionality is not available. Only smaller devices are
- supported (24c16 and below, max 4 kByte).
-
- This driver can also be built as a module. If so, the module
- will be called at24.
-
-config SENSORS_EEPROM
- tristate "EEPROM reader"
- depends on EXPERIMENTAL
- help
- If you say yes here you get read-only access to the EEPROM data
- available on modern memory DIMMs and Sony Vaio laptops. Such
- EEPROMs could theoretically be available on other devices as well.
-
- This driver can also be built as a module. If so, the module
- will be called eeprom.
-
config SENSORS_PCF8574
tristate "Philips PCF8574 and PCF8574A (DEPRECATED)"
depends on EXPERIMENTAL && GPIO_PCF857X = "n"
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 00fcb5193ac2..d142f238a2de 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,8 +11,6 @@
#
obj-$(CONFIG_DS1682) += ds1682.o
-obj-$(CONFIG_AT24) += at24.o
-obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
diff --git a/drivers/i2c/chips/at24.c b/drivers/i2c/chips/at24.c
deleted file mode 100644
index d4775528abc6..000000000000
--- a/drivers/i2c/chips/at24.c
+++ /dev/null
@@ -1,582 +0,0 @@
-/*
- * at24.c - handle most I2C EEPROMs
- *
- * Copyright (C) 2005-2007 David Brownell
- * Copyright (C) 2008 Wolfram Sang, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/sysfs.h>
-#include <linux/mod_devicetable.h>
-#include <linux/log2.h>
-#include <linux/bitops.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-
-/*
- * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable.
- * Differences between different vendor product lines (like Atmel AT24C or
- * MicroChip 24LC, etc) won't much matter for typical read/write access.
- * There are also I2C RAM chips, likewise interchangeable. One example
- * would be the PCF8570, which acts like a 24c02 EEPROM (256 bytes).
- *
- * However, misconfiguration can lose data. "Set 16-bit memory address"
- * to a part with 8-bit addressing will overwrite data. Writing with too
- * big a page size also loses data. And it's not safe to assume that the
- * conventional addresses 0x50..0x57 only hold eeproms; a PCF8563 RTC
- * uses 0x51, for just one example.
- *
- * Accordingly, explicit board-specific configuration data should be used
- * in almost all cases. (One partial exception is an SMBus used to access
- * "SPD" data for DRAM sticks. Those only use 24c02 EEPROMs.)
- *
- * So this driver uses "new style" I2C driver binding, expecting to be
- * told what devices exist. That may be in arch/X/mach-Y/board-Z.c or
- * similar kernel-resident tables; or, configuration data coming from
- * a bootloader.
- *
- * Other than binding model, current differences from "eeprom" driver are
- * that this one handles write access and isn't restricted to 24c02 devices.
- * It also handles larger devices (32 kbit and up) with two-byte addresses,
- * which won't work on pure SMBus systems.
- */
-
-struct at24_data {
- struct at24_platform_data chip;
- bool use_smbus;
-
- /*
- * Lock protects against activities from other Linux tasks,
- * but not from changes by other I2C masters.
- */
- struct mutex lock;
- struct bin_attribute bin;
-
- u8 *writebuf;
- unsigned write_max;
- unsigned num_addresses;
-
- /*
- * Some chips tie up multiple I2C addresses; dummy devices reserve
- * them for us, and we'll use them with SMBus calls.
- */
- struct i2c_client *client[];
-};
-
-/*
- * This parameter is to help this driver avoid blocking other drivers out
- * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C
- * clock, one 256 byte read takes about 1/43 second which is excessive;
- * but the 1/170 second it takes at 400 kHz may be quite reasonable; and
- * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible.
- *
- * This value is forced to be a power of two so that writes align on pages.
- */
-static unsigned io_limit = 128;
-module_param(io_limit, uint, 0);
-MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)");
-
-/*
- * Specs often allow 5 msec for a page write, sometimes 20 msec;
- * it's important to recover from write timeouts.
- */
-static unsigned write_timeout = 25;
-module_param(write_timeout, uint, 0);
-MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)");
-
-#define AT24_SIZE_BYTELEN 5
-#define AT24_SIZE_FLAGS 8
-
-#define AT24_BITMASK(x) (BIT(x) - 1)
-
-/* create non-zero magic value for given eeprom parameters */
-#define AT24_DEVICE_MAGIC(_len, _flags) \
- ((1 << AT24_SIZE_FLAGS | (_flags)) \
- << AT24_SIZE_BYTELEN | ilog2(_len))
-
-static const struct i2c_device_id at24_ids[] = {
- /* needs 8 addresses as A0-A2 are ignored */
- { "24c00", AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR) },
- /* old variants can't be handled with this generic entry! */
- { "24c01", AT24_DEVICE_MAGIC(1024 / 8, 0) },
- { "24c02", AT24_DEVICE_MAGIC(2048 / 8, 0) },
- /* spd is a 24c02 in memory DIMMs */
- { "spd", AT24_DEVICE_MAGIC(2048 / 8,
- AT24_FLAG_READONLY | AT24_FLAG_IRUGO) },
- { "24c04", AT24_DEVICE_MAGIC(4096 / 8, 0) },
- /* 24rf08 quirk is handled at i2c-core */
- { "24c08", AT24_DEVICE_MAGIC(8192 / 8, 0) },
- { "24c16", AT24_DEVICE_MAGIC(16384 / 8, 0) },
- { "24c32", AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16) },
- { "24c64", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16) },
- { "24c128", AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16) },
- { "24c256", AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16) },
- { "24c512", AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16) },
- { "24c1024", AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16) },
- { "at24", 0 },
- { /* END OF LIST */ }
-};
-MODULE_DEVICE_TABLE(i2c, at24_ids);
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * This routine supports chips which consume multiple I2C addresses. It
- * computes the addressing information to be used for a given r/w request.
- * Assumes that sanity checks for offset happened at sysfs-layer.
- */
-static struct i2c_client *at24_translate_offset(struct at24_data *at24,
- unsigned *offset)
-{
- unsigned i;
-
- if (at24->chip.flags & AT24_FLAG_ADDR16) {
- i = *offset >> 16;
- *offset &= 0xffff;
- } else {
- i = *offset >> 8;
- *offset &= 0xff;
- }
-
- return at24->client[i];
-}
-
-static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
- unsigned offset, size_t count)
-{
- struct i2c_msg msg[2];
- u8 msgbuf[2];
- struct i2c_client *client;
- int status, i;
-
- memset(msg, 0, sizeof(msg));
-
- /*
- * REVISIT some multi-address chips don't rollover page reads to
- * the next slave address, so we may need to truncate the count.
- * Those chips might need another quirk flag.
- *
- * If the real hardware used four adjacent 24c02 chips and that
- * were misconfigured as one 24c08, that would be a similar effect:
- * one "eeprom" file not four, but larger reads would fail when
- * they crossed certain pages.
- */
-
- /*
- * Slave address and byte offset derive from the offset. Always
- * set the byte address; on a multi-master board, another master
- * may have changed the chip's "current" address pointer.
- */
- client = at24_translate_offset(at24, &offset);
-
- if (count > io_limit)
- count = io_limit;
-
- /* Smaller eeproms can work given some SMBus extension calls */
- if (at24->use_smbus) {
- if (count > I2C_SMBUS_BLOCK_MAX)
- count = I2C_SMBUS_BLOCK_MAX;
- status = i2c_smbus_read_i2c_block_data(client, offset,
- count, buf);
- dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
- count, offset, status);
- return (status < 0) ? -EIO : status;
- }
-
- /*
- * When we have a better choice than SMBus calls, use a combined
- * I2C message. Write address; then read up to io_limit data bytes.
- * Note that read page rollover helps us here (unlike writes).
- * msgbuf is u8 and will cast to our needs.
- */
- i = 0;
- if (at24->chip.flags & AT24_FLAG_ADDR16)
- msgbuf[i++] = offset >> 8;
- msgbuf[i++] = offset;
-
- msg[0].addr = client->addr;
- msg[0].buf = msgbuf;
- msg[0].len = i;
-
- msg[1].addr = client->addr;
- msg[1].flags = I2C_M_RD;
- msg[1].buf = buf;
- msg[1].len = count;
-
- status = i2c_transfer(client->adapter, msg, 2);
- dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
- count, offset, status);
-
- if (status == 2)
- return count;
- else if (status >= 0)
- return -EIO;
- else
- return status;
-}
-
-static ssize_t at24_bin_read(struct kobject *kobj, struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
-{
- struct at24_data *at24;
- ssize_t retval = 0;
-
- at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
-
- if (unlikely(!count))
- return count;
-
- /*
- * Read data from chip, protecting against concurrent updates
- * from this host, but not from other I2C masters.
- */
- mutex_lock(&at24->lock);
-
- while (count) {
- ssize_t status;
-
- status = at24_eeprom_read(at24, buf, off, count);
- if (status <= 0) {
- if (retval == 0)
- retval = status;
- break;
- }
- buf += status;
- off += status;
- count -= status;
- retval += status;
- }
-
- mutex_unlock(&at24->lock);
-
- return retval;
-}
-
-
-/*
- * REVISIT: export at24_bin{read,write}() to let other kernel code use
- * eeprom data. For example, it might hold a board's Ethernet address, or
- * board-specific calibration data generated on the manufacturing floor.
- */
-
-
-/*
- * Note that if the hardware write-protect pin is pulled high, the whole
- * chip is normally write protected. But there are plenty of product
- * variants here, including OTP fuses and partial chip protect.
- *
- * We only use page mode writes; the alternative is sloooow. This routine
- * writes at most one page.
- */
-static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
- unsigned offset, size_t count)
-{
- struct i2c_client *client;
- struct i2c_msg msg;
- ssize_t status;
- unsigned long timeout, write_time;
- unsigned next_page;
-
- /* Get corresponding I2C address and adjust offset */
- client = at24_translate_offset(at24, &offset);
-
- /* write_max is at most a page */
- if (count > at24->write_max)
- count = at24->write_max;
-
- /* Never roll over backwards, to the start of this page */
- next_page = roundup(offset + 1, at24->chip.page_size);
- if (offset + count > next_page)
- count = next_page - offset;
-
- /* If we'll use I2C calls for I/O, set up the message */
- if (!at24->use_smbus) {
- int i = 0;
-
- msg.addr = client->addr;
- msg.flags = 0;
-
- /* msg.buf is u8 and casts will mask the values */
- msg.buf = at24->writebuf;
- if (at24->chip.flags & AT24_FLAG_ADDR16)
- msg.buf[i++] = offset >> 8;
-
- msg.buf[i++] = offset;
- memcpy(&msg.buf[i], buf, count);
- msg.len = i + count;
- }
-
- /*
- * Writes fail if the previous one didn't complete yet. We may
- * loop a few times until this one succeeds, waiting at least
- * long enough for one entire page write to work.
- */
- timeout = jiffies + msecs_to_jiffies(write_timeout);
- do {
- write_time = jiffies;
- if (at24->use_smbus) {
- status = i2c_smbus_write_i2c_block_data(client,
- offset, count, buf);
- if (status == 0)
- status = count;
- } else {
- status = i2c_transfer(client->adapter, &msg, 1);
- if (status == 1)
- status = count;
- }
- dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n",
- count, offset, status, jiffies);
-
- if (status == count)
- return count;
-
- /* REVISIT: at HZ=100, this is sloooow */
- msleep(1);
- } while (time_before(write_time, timeout));
-
- return -ETIMEDOUT;
-}
-
-static ssize_t at24_bin_write(struct kobject *kobj, struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
-{
- struct at24_data *at24;
- ssize_t retval = 0;
-
- at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
-
- if (unlikely(!count))
- return count;
-
- /*
- * Write data to chip, protecting against concurrent updates
- * from this host, but not from other I2C masters.
- */
- mutex_lock(&at24->lock);
-
- while (count) {
- ssize_t status;
-
- status = at24_eeprom_write(at24, buf, off, count);
- if (status <= 0) {
- if (retval == 0)
- retval = status;
- break;
- }
- buf += status;
- off += status;
- count -= status;
- retval += status;
- }
-
- mutex_unlock(&at24->lock);
-
- return retval;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
-{
- struct at24_platform_data chip;
- bool writable;
- bool use_smbus = false;
- struct at24_data *at24;
- int err;
- unsigned i, num_addresses;
- kernel_ulong_t magic;
-
- if (client->dev.platform_data) {
- chip = *(struct at24_platform_data *)client->dev.platform_data;
- } else {
- if (!id->driver_data) {
- err = -ENODEV;
- goto err_out;
- }
- magic = id->driver_data;
- chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN));
- magic >>= AT24_SIZE_BYTELEN;
- chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS);
- /*
- * This is slow, but we can't know all eeproms, so we better
- * play safe. Specifying custom eeprom-types via platform_data
- * is recommended anyhow.
- */
- chip.page_size = 1;
- }
-
- if (!is_power_of_2(chip.byte_len))
- dev_warn(&client->dev,
- "byte_len looks suspicious (no power of 2)!\n");
- if (!is_power_of_2(chip.page_size))
- dev_warn(&client->dev,
- "page_size looks suspicious (no power of 2)!\n");
-
- /* Use I2C operations unless we're stuck with SMBus extensions. */
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
- if (chip.flags & AT24_FLAG_ADDR16) {
- err = -EPFNOSUPPORT;
- goto err_out;
- }
- if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
- err = -EPFNOSUPPORT;
- goto err_out;
- }
- use_smbus = true;
- }
-
- if (chip.flags & AT24_FLAG_TAKE8ADDR)
- num_addresses = 8;
- else
- num_addresses = DIV_ROUND_UP(chip.byte_len,
- (chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256);
-
- at24 = kzalloc(sizeof(struct at24_data) +
- num_addresses * sizeof(struct i2c_client *), GFP_KERNEL);
- if (!at24) {
- err = -ENOMEM;
- goto err_out;
- }
-
- mutex_init(&at24->lock);
- at24->use_smbus = use_smbus;
- at24->chip = chip;
- at24->num_addresses = num_addresses;
-
- /*
- * Export the EEPROM bytes through sysfs, since that's convenient.
- * By default, only root should see the data (maybe passwords etc)
- */
- at24->bin.attr.name = "eeprom";
- at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
- at24->bin.read = at24_bin_read;
- at24->bin.size = chip.byte_len;
-
- writable = !(chip.flags & AT24_FLAG_READONLY);
- if (writable) {
- if (!use_smbus || i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) {
-
- unsigned write_max = chip.page_size;
-
- at24->bin.write = at24_bin_write;
- at24->bin.attr.mode |= S_IWUSR;
-
- if (write_max > io_limit)
- write_max = io_limit;
- if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX)
- write_max = I2C_SMBUS_BLOCK_MAX;
- at24->write_max = write_max;
-
- /* buffer (data + address at the beginning) */
- at24->writebuf = kmalloc(write_max + 2, GFP_KERNEL);
- if (!at24->writebuf) {
- err = -ENOMEM;
- goto err_struct;
- }
- } else {
- dev_warn(&client->dev,
- "cannot write due to controller restrictions.");
- }
- }
-
- at24->client[0] = client;
-
- /* use dummy devices for multiple-address chips */
- for (i = 1; i < num_addresses; i++) {
- at24->client[i] = i2c_new_dummy(client->adapter,
- client->addr + i);
- if (!at24->client[i]) {
- dev_err(&client->dev, "address 0x%02x unavailable\n",
- client->addr + i);
- err = -EADDRINUSE;
- goto err_clients;
- }
- }
-
- err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin);
- if (err)
- goto err_clients;
-
- i2c_set_clientdata(client, at24);
-
- dev_info(&client->dev, "%zu byte %s EEPROM %s\n",
- at24->bin.size, client->name,
- writable ? "(writable)" : "(read-only)");
- dev_dbg(&client->dev,
- "page_size %d, num_addresses %d, write_max %d%s\n",
- chip.page_size, num_addresses,
- at24->write_max,
- use_smbus ? ", use_smbus" : "");
-
- return 0;
-
-err_clients:
- for (i = 1; i < num_addresses; i++)
- if (at24->client[i])
- i2c_unregister_device(at24->client[i]);
-
- kfree(at24->writebuf);
-err_struct:
- kfree(at24);
-err_out:
- dev_dbg(&client->dev, "probe error %d\n", err);
- return err;
-}
-
-static int __devexit at24_remove(struct i2c_client *client)
-{
- struct at24_data *at24;
- int i;
-
- at24 = i2c_get_clientdata(client);
- sysfs_remove_bin_file(&client->dev.kobj, &at24->bin);
-
- for (i = 1; i < at24->num_addresses; i++)
- i2c_unregister_device(at24->client[i]);
-
- kfree(at24->writebuf);
- kfree(at24);
- i2c_set_clientdata(client, NULL);
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static struct i2c_driver at24_driver = {
- .driver = {
- .name = "at24",
- .owner = THIS_MODULE,
- },
- .probe = at24_probe,
- .remove = __devexit_p(at24_remove),
- .id_table = at24_ids,
-};
-
-static int __init at24_init(void)
-{
- io_limit = rounddown_pow_of_two(io_limit);
- return i2c_add_driver(&at24_driver);
-}
-module_init(at24_init);
-
-static void __exit at24_exit(void)
-{
- i2c_del_driver(&at24_driver);
-}
-module_exit(at24_exit);
-
-MODULE_DESCRIPTION("Driver for most I2C EEPROMs");
-MODULE_AUTHOR("David Brownell and Wolfram Sang");
-MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
deleted file mode 100644
index 2c27193aeaa0..000000000000
--- a/drivers/i2c/chips/eeprom.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
- Philip Edelbrock <phil@netroedge.com>
- Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
- Copyright (C) 2003 IBM Corp.
- Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
- 0x55, 0x56, 0x57, I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(eeprom);
-
-
-/* Size of EEPROM in bytes */
-#define EEPROM_SIZE 256
-
-/* possible types of eeprom devices */
-enum eeprom_nature {
- UNKNOWN,
- VAIO,
-};
-
-/* Each client has this additional data */
-struct eeprom_data {
- struct mutex update_lock;
- u8 valid; /* bitfield, bit!=0 if slice is valid */
- unsigned long last_updated[8]; /* In jiffies, 8 slices */
- u8 data[EEPROM_SIZE]; /* Register values */
- enum eeprom_nature nature;
-};
-
-
-static void eeprom_update_client(struct i2c_client *client, u8 slice)
-{
- struct eeprom_data *data = i2c_get_clientdata(client);
- int i;
-
- mutex_lock(&data->update_lock);
-
- if (!(data->valid & (1 << slice)) ||
- time_after(jiffies, data->last_updated[slice] + 300 * HZ)) {
- dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice);
-
- if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
- for (i = slice << 5; i < (slice + 1) << 5; i += 32)
- if (i2c_smbus_read_i2c_block_data(client, i,
- 32, data->data + i)
- != 32)
- goto exit;
- } else {
- for (i = slice << 5; i < (slice + 1) << 5; i += 2) {
- int word = i2c_smbus_read_word_data(client, i);
- if (word < 0)
- goto exit;
- data->data[i] = word & 0xff;
- data->data[i + 1] = word >> 8;
- }
- }
- data->last_updated[slice] = jiffies;
- data->valid |= (1 << slice);
- }
-exit:
- mutex_unlock(&data->update_lock);
-}
-
-static ssize_t eeprom_read(struct kobject *kobj, struct bin_attribute *bin_attr,
- char *buf, loff_t off, size_t count)
-{
- struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj));
- struct eeprom_data *data = i2c_get_clientdata(client);
- u8 slice;
-
- if (off > EEPROM_SIZE)
- return 0;
- if (off + count > EEPROM_SIZE)
- count = EEPROM_SIZE - off;
-
- /* Only refresh slices which contain requested bytes */
- for (slice = off >> 5; slice <= (off + count - 1) >> 5; slice++)
- eeprom_update_client(client, slice);
-
- /* Hide Vaio private settings to regular users:
- - BIOS passwords: bytes 0x00 to 0x0f
- - UUID: bytes 0x10 to 0x1f
- - Serial number: 0xc0 to 0xdf */
- if (data->nature == VAIO && !capable(CAP_SYS_ADMIN)) {
- int i;
-
- for (i = 0; i < count; i++) {
- if ((off + i <= 0x1f) ||
- (off + i >= 0xc0 && off + i <= 0xdf))
- buf[i] = 0;
- else
- buf[i] = data->data[off + i];
- }
- } else {
- memcpy(buf, &data->data[off], count);
- }
-
- return count;
-}
-
-static struct bin_attribute eeprom_attr = {
- .attr = {
- .name = "eeprom",
- .mode = S_IRUGO,
- },
- .size = EEPROM_SIZE,
- .read = eeprom_read,
-};
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int eeprom_detect(struct i2c_client *client, int kind,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = client->adapter;
-
- /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all
- addresses 0x50-0x57, but we only care about 0x50. So decline
- attaching to addresses >= 0x51 on DDC buses */
- if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51)
- return -ENODEV;
-
- /* There are four ways we can read the EEPROM data:
- (1) I2C block reads (faster, but unsupported by most adapters)
- (2) Word reads (128% overhead)
- (3) Consecutive byte reads (88% overhead, unsafe)
- (4) Regular byte data reads (265% overhead)
- The third and fourth methods are not implemented by this driver
- because all known adapters support one of the first two. */
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)
- && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
- return -ENODEV;
-
- strlcpy(info->type, "eeprom", I2C_NAME_SIZE);
-
- return 0;
-}
-
-static int eeprom_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct i2c_adapter *adapter = client->adapter;
- struct eeprom_data *data;
- int err;
-
- if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- memset(data->data, 0xff, EEPROM_SIZE);
- i2c_set_clientdata(client, data);
- mutex_init(&data->update_lock);
- data->nature = UNKNOWN;
-
- /* Detect the Vaio nature of EEPROMs.
- We use the "PCG-" or "VGN-" prefix as the signature. */
- if (client->addr == 0x57
- && i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
- char name[4];
-
- name[0] = i2c_smbus_read_byte_data(client, 0x80);
- name[1] = i2c_smbus_read_byte_data(client, 0x81);
- name[2] = i2c_smbus_read_byte_data(client, 0x82);
- name[3] = i2c_smbus_read_byte_data(client, 0x83);
-
- if (!memcmp(name, "PCG-", 4) || !memcmp(name, "VGN-", 4)) {
- dev_info(&client->dev, "Vaio EEPROM detected, "
- "enabling privacy protection\n");
- data->nature = VAIO;
- }
- }
-
- /* create the sysfs eeprom file */
- err = sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr);
- if (err)
- goto exit_kfree;
-
- return 0;
-
-exit_kfree:
- kfree(data);
-exit:
- return err;
-}
-
-static int eeprom_remove(struct i2c_client *client)
-{
- sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr);
- kfree(i2c_get_clientdata(client));
-
- return 0;
-}
-
-static const struct i2c_device_id eeprom_id[] = {
- { "eeprom", 0 },
- { }
-};
-
-static struct i2c_driver eeprom_driver = {
- .driver = {
- .name = "eeprom",
- },
- .probe = eeprom_probe,
- .remove = eeprom_remove,
- .id_table = eeprom_id,
-
- .class = I2C_CLASS_DDC | I2C_CLASS_SPD,
- .detect = eeprom_detect,
- .address_data = &addr_data,
-};
-
-static int __init eeprom_init(void)
-{
- return i2c_add_driver(&eeprom_driver);
-}
-
-static void __exit eeprom_exit(void)
-{
- i2c_del_driver(&eeprom_driver);
-}
-
-
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
- "Philip Edelbrock <phil@netroedge.com> and "
- "Greg Kroah-Hartman <greg@kroah.com>");
-MODULE_DESCRIPTION("I2C EEPROM driver");
-MODULE_LICENSE("GPL");
-
-module_init(eeprom_init);
-module_exit(eeprom_exit);
OpenPOWER on IntegriCloud