diff options
Diffstat (limited to 'drivers/i2c/busses')
| -rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 120 |
1 files changed, 119 insertions, 1 deletions
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 5ecbb3fdc27e..eaef9bc9d88c 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -88,12 +88,13 @@ #include <linux/slab.h> #include <linux/wait.h> #include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/platform_data/itco_wdt.h> #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ defined CONFIG_DMI #include <linux/gpio.h> #include <linux/i2c-mux-gpio.h> -#include <linux/platform_device.h> #endif /* I801 SMBus address offsets */ @@ -113,6 +114,16 @@ #define SMBPCICTL 0x004 #define SMBPCISTS 0x006 #define SMBHSTCFG 0x040 +#define TCOBASE 0x050 +#define TCOCTL 0x054 + +#define ACPIBASE 0x040 +#define ACPIBASE_SMI_OFF 0x030 +#define ACPICTRL 0x044 +#define ACPICTRL_EN 0x080 + +#define SBREG_BAR 0x10 +#define SBREG_SMBCTRL 0xc6000c /* Host status bits for SMBPCISTS */ #define SMBPCISTS_INTS 0x08 @@ -125,6 +136,9 @@ #define SMBHSTCFG_SMB_SMI_EN 2 #define SMBHSTCFG_I2C_EN 4 +/* TCO configuration bits for TCOCTL */ +#define TCOCTL_EN 0x0100 + /* Auxiliary control register bits, ICH4+ only */ #define SMBAUXCTL_CRC 1 #define SMBAUXCTL_E32B 2 @@ -221,6 +235,7 @@ struct i801_priv { const struct i801_mux_config *mux_drvdata; struct platform_device *mux_pdev; #endif + struct platform_device *tco_pdev; }; #define FEATURE_SMBUS_PEC (1 << 0) @@ -230,6 +245,7 @@ struct i801_priv { #define FEATURE_IRQ (1 << 4) /* Not really a feature, but it's convenient to handle it as such */ #define FEATURE_IDF (1 << 15) +#define FEATURE_TCO (1 << 16) static const char *i801_feature_names[] = { "SMBus PEC", @@ -1132,6 +1148,95 @@ static inline unsigned int i801_get_adapter_class(struct i801_priv *priv) } #endif +static const struct itco_wdt_platform_data tco_platform_data = { + .name = "Intel PCH", + .version = 4, +}; + +static DEFINE_SPINLOCK(p2sb_spinlock); + +static void i801_add_tco(struct i801_priv *priv) +{ + struct pci_dev *pci_dev = priv->pci_dev; + struct resource tco_res[3], *res; + struct platform_device *pdev; + unsigned int devfn; + u32 tco_base, tco_ctl; + u32 base_addr, ctrl_val; + u64 base64_addr; + + if (!(priv->features & FEATURE_TCO)) + return; + + pci_read_config_dword(pci_dev, TCOBASE, &tco_base); + pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl); + if (!(tco_ctl & TCOCTL_EN)) + return; + + memset(tco_res, 0, sizeof(tco_res)); + + res = &tco_res[ICH_RES_IO_TCO]; + res->start = tco_base & ~1; + res->end = res->start + 32 - 1; + res->flags = IORESOURCE_IO; + + /* + * Power Management registers. + */ + devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 2); + pci_bus_read_config_dword(pci_dev->bus, devfn, ACPIBASE, &base_addr); + + res = &tco_res[ICH_RES_IO_SMI]; + res->start = (base_addr & ~1) + ACPIBASE_SMI_OFF; + res->end = res->start + 3; + res->flags = IORESOURCE_IO; + + /* + * Enable the ACPI I/O space. + */ + pci_bus_read_config_dword(pci_dev->bus, devfn, ACPICTRL, &ctrl_val); + ctrl_val |= ACPICTRL_EN; + pci_bus_write_config_dword(pci_dev->bus, devfn, ACPICTRL, ctrl_val); + + /* + * We must access the NO_REBOOT bit over the Primary to Sideband + * bridge (P2SB). The BIOS prevents the P2SB device from being + * enumerated by the PCI subsystem, so we need to unhide/hide it + * to lookup the P2SB BAR. + */ + spin_lock(&p2sb_spinlock); + + devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 1); + + /* Unhide the P2SB device */ + pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x0); + + pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR, &base_addr); + base64_addr = base_addr & 0xfffffff0; + + pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR + 0x4, &base_addr); + base64_addr |= (u64)base_addr << 32; + + /* Hide the P2SB device */ + pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x1); + spin_unlock(&p2sb_spinlock); + + res = &tco_res[ICH_RES_MEM_OFF]; + res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL; + res->end = res->start + 3; + res->flags = IORESOURCE_MEM; + + pdev = platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1, + tco_res, 3, &tco_platform_data, + sizeof(tco_platform_data)); + if (IS_ERR(pdev)) { + dev_warn(&pci_dev->dev, "failed to create iTCO device\n"); + return; + } + + priv->tco_pdev = pdev; +} + static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) { unsigned char temp; @@ -1149,6 +1254,15 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) priv->pci_dev = dev; switch (dev->device) { + case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS: + case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS: + priv->features |= FEATURE_I2C_BLOCK_READ; + priv->features |= FEATURE_IRQ; + priv->features |= FEATURE_SMBUS_PEC; + priv->features |= FEATURE_BLOCK_BUFFER; + priv->features |= FEATURE_TCO; + break; + case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0: case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1: case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2: @@ -1265,6 +1379,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) dev_info(&dev->dev, "SMBus using %s\n", priv->features & FEATURE_IRQ ? "PCI interrupt" : "polling"); + i801_add_tco(priv); + /* set up the sysfs linkage to our parent device */ priv->adapter.dev.parent = &dev->dev; @@ -1296,6 +1412,8 @@ static void i801_remove(struct pci_dev *dev) i2c_del_adapter(&priv->adapter); pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); + platform_device_unregister(priv->tco_pdev); + /* * do not call pci_disable_device(dev) since it can cause hard hangs on * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010) |
