1 files changed, 52 insertions, 11 deletions

diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 366ad6c67ce4..b444d0e35a98 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -532,7 +532,6 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder)
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
 	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
 	enum port port;
-	u32 tmp;
 
 	DRM_DEBUG_KMS("\n");
 
@@ -551,11 +550,13 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder)
 
 	msleep(intel_dsi->panel_on_delay);
 
-	if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
+	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
+		u32 val;
+
 		/* Disable DPOunit clock gating, can stall pipe */
-		tmp = I915_READ(DSPCLK_GATE_D);
-		tmp |= DPOUNIT_CLOCK_GATE_DISABLE;
-		I915_WRITE(DSPCLK_GATE_D, tmp);
+		val = I915_READ(DSPCLK_GATE_D);
+		val |= DPOUNIT_CLOCK_GATE_DISABLE;
+		I915_WRITE(DSPCLK_GATE_D, val);
 	}
 
 	/* put device in ready state */
@@ -693,7 +694,7 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder)
 
 	intel_dsi_clear_device_ready(encoder);
 
-	if (!IS_BROXTON(dev_priv)) {
+	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
 		u32 val;
 
 		val = I915_READ(DSPCLK_GATE_D);
@@ -1171,6 +1172,12 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder)
 	if (intel_dsi->clock_stop)
 		tmp |= CLOCKSTOP;
 
+	if (IS_BROXTON(dev_priv)) {
+		tmp |= BXT_DPHY_DEFEATURE_EN;
+		if (!is_cmd_mode(intel_dsi))
+			tmp |= BXT_DEFEATURE_DPI_FIFO_CTR;
+	}
+
 	for_each_dsi_port(port, intel_dsi->ports) {
 		I915_WRITE(MIPI_DSI_FUNC_PRG(port), val);
 
@@ -1378,12 +1385,12 @@ static const struct drm_encoder_funcs intel_dsi_funcs = {
 static const struct drm_connector_helper_funcs intel_dsi_connector_helper_funcs = {
 	.get_modes = intel_dsi_get_modes,
 	.mode_valid = intel_dsi_mode_valid,
-	.best_encoder = intel_best_encoder,
 };
 
 static const struct drm_connector_funcs intel_dsi_connector_funcs = {
 	.dpms = drm_atomic_helper_connector_dpms,
 	.detect = intel_dsi_detect,
+	.early_unregister = intel_connector_unregister,
 	.destroy = intel_dsi_connector_destroy,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = intel_dsi_set_property,
@@ -1449,7 +1456,7 @@ void intel_dsi_init(struct drm_device *dev)
 	connector = &intel_connector->base;
 
 	drm_encoder_init(dev, encoder, &intel_dsi_funcs, DRM_MODE_ENCODER_DSI,
-			 NULL);
+			 "DSI %c", port_name(port));
 
 	intel_encoder->compute_config = intel_dsi_compute_config;
 	intel_encoder->pre_enable = intel_dsi_pre_enable;
@@ -1460,7 +1467,6 @@ void intel_dsi_init(struct drm_device *dev)
 	intel_encoder->get_config = intel_dsi_get_config;
 
 	intel_connector->get_hw_state = intel_connector_get_hw_state;
-	intel_connector->unregister = intel_connector_unregister;
 
 	/*
 	 * On BYT/CHV, pipe A maps to MIPI DSI port A, pipe B maps to MIPI DSI
@@ -1473,10 +1479,42 @@ void intel_dsi_init(struct drm_device *dev)
 	else
 		intel_encoder->crtc_mask = BIT(PIPE_B);
 
-	if (dev_priv->vbt.dsi.config->dual_link)
+	if (dev_priv->vbt.dsi.config->dual_link) {
 		intel_dsi->ports = BIT(PORT_A) | BIT(PORT_C);
-	else
+
+		switch (dev_priv->vbt.dsi.config->dl_dcs_backlight_ports) {
+		case DL_DCS_PORT_A:
+			intel_dsi->dcs_backlight_ports = BIT(PORT_A);
+			break;
+		case DL_DCS_PORT_C:
+			intel_dsi->dcs_backlight_ports = BIT(PORT_C);
+			break;
+		default:
+		case DL_DCS_PORT_A_AND_C:
+			intel_dsi->dcs_backlight_ports = BIT(PORT_A) | BIT(PORT_C);
+			break;
+		}
+
+		switch (dev_priv->vbt.dsi.config->dl_dcs_cabc_ports) {
+		case DL_DCS_PORT_A:
+			intel_dsi->dcs_cabc_ports = BIT(PORT_A);
+			break;
+		case DL_DCS_PORT_C:
+			intel_dsi->dcs_cabc_ports = BIT(PORT_C);
+			break;
+		default:
+		case DL_DCS_PORT_A_AND_C:
+			intel_dsi->dcs_cabc_ports = BIT(PORT_A) | BIT(PORT_C);
+			break;
+		}
+	} else {
 		intel_dsi->ports = BIT(port);
+		intel_dsi->dcs_backlight_ports = BIT(port);
+		intel_dsi->dcs_cabc_ports = BIT(port);
+	}
+
+	if (!dev_priv->vbt.dsi.config->cabc_supported)
+		intel_dsi->dcs_cabc_ports = 0;
 
 	/* Create a DSI host (and a device) for each port. */
 	for_each_dsi_port(port, intel_dsi->ports) {
@@ -1545,6 +1583,9 @@ void intel_dsi_init(struct drm_device *dev)
 		goto err;
 	}
 
+	connector->display_info.width_mm = fixed_mode->width_mm;
+	connector->display_info.height_mm = fixed_mode->height_mm;
+
 	intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
 
 	intel_dsi_add_properties(intel_connector);