diff options
Diffstat (limited to 'drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c')
| -rw-r--r-- | drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 50 |
1 files changed, 45 insertions, 5 deletions
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c index 113edffb5960..f1404adc3a90 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c @@ -918,6 +918,36 @@ fail: return -EINVAL; } +/** + * DOC: busy_percent + * + * The amdgpu driver provides a sysfs API for reading how busy the GPU + * is as a percentage. The file gpu_busy_percent is used for this. + * The SMU firmware computes a percentage of load based on the + * aggregate activity level in the IP cores. + */ +static ssize_t amdgpu_get_busy_percent(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct drm_device *ddev = dev_get_drvdata(dev); + struct amdgpu_device *adev = ddev->dev_private; + int r, value, size = sizeof(value); + + /* sanity check PP is enabled */ + if (!(adev->powerplay.pp_funcs && + adev->powerplay.pp_funcs->read_sensor)) + return -EINVAL; + + /* read the IP busy sensor */ + r = amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_GPU_LOAD, + (void *)&value, &size); + if (r) + return r; + + return snprintf(buf, PAGE_SIZE, "%d\n", value); +} + static DEVICE_ATTR(power_dpm_state, S_IRUGO | S_IWUSR, amdgpu_get_dpm_state, amdgpu_set_dpm_state); static DEVICE_ATTR(power_dpm_force_performance_level, S_IRUGO | S_IWUSR, amdgpu_get_dpm_forced_performance_level, @@ -951,6 +981,8 @@ static DEVICE_ATTR(pp_power_profile_mode, S_IRUGO | S_IWUSR, static DEVICE_ATTR(pp_od_clk_voltage, S_IRUGO | S_IWUSR, amdgpu_get_pp_od_clk_voltage, amdgpu_set_pp_od_clk_voltage); +static DEVICE_ATTR(gpu_busy_percent, S_IRUGO, + amdgpu_get_busy_percent, NULL); static ssize_t amdgpu_hwmon_show_temp(struct device *dev, struct device_attribute *attr, @@ -1697,10 +1729,10 @@ static void amdgpu_dpm_change_power_state_locked(struct amdgpu_device *adev) void amdgpu_dpm_enable_uvd(struct amdgpu_device *adev, bool enable) { - if (adev->powerplay.pp_funcs->powergate_uvd) { + if (adev->powerplay.pp_funcs->set_powergating_by_smu) { /* enable/disable UVD */ mutex_lock(&adev->pm.mutex); - amdgpu_dpm_powergate_uvd(adev, !enable); + amdgpu_dpm_set_powergating_by_smu(adev, AMD_IP_BLOCK_TYPE_UVD, !enable); mutex_unlock(&adev->pm.mutex); } else { if (enable) { @@ -1719,10 +1751,10 @@ void amdgpu_dpm_enable_uvd(struct amdgpu_device *adev, bool enable) void amdgpu_dpm_enable_vce(struct amdgpu_device *adev, bool enable) { - if (adev->powerplay.pp_funcs->powergate_vce) { + if (adev->powerplay.pp_funcs->set_powergating_by_smu) { /* enable/disable VCE */ mutex_lock(&adev->pm.mutex); - amdgpu_dpm_powergate_vce(adev, !enable); + amdgpu_dpm_set_powergating_by_smu(adev, AMD_IP_BLOCK_TYPE_VCE, !enable); mutex_unlock(&adev->pm.mutex); } else { if (enable) { @@ -1854,6 +1886,13 @@ int amdgpu_pm_sysfs_init(struct amdgpu_device *adev) "pp_od_clk_voltage\n"); return ret; } + ret = device_create_file(adev->dev, + &dev_attr_gpu_busy_percent); + if (ret) { + DRM_ERROR("failed to create device file " + "gpu_busy_level\n"); + return ret; + } ret = amdgpu_debugfs_pm_init(adev); if (ret) { DRM_ERROR("Failed to register debugfs file for dpm!\n"); @@ -1889,6 +1928,7 @@ void amdgpu_pm_sysfs_fini(struct amdgpu_device *adev) &dev_attr_pp_power_profile_mode); device_remove_file(adev->dev, &dev_attr_pp_od_clk_voltage); + device_remove_file(adev->dev, &dev_attr_gpu_busy_percent); } void amdgpu_pm_compute_clocks(struct amdgpu_device *adev) @@ -1919,7 +1959,7 @@ void amdgpu_pm_compute_clocks(struct amdgpu_device *adev) if (!amdgpu_device_has_dc_support(adev)) { mutex_lock(&adev->pm.mutex); amdgpu_dpm_get_active_displays(adev); - adev->pm.pm_display_cfg.num_display = adev->pm.dpm.new_active_crtcs; + adev->pm.pm_display_cfg.num_display = adev->pm.dpm.new_active_crtc_count; adev->pm.pm_display_cfg.vrefresh = amdgpu_dpm_get_vrefresh(adev); adev->pm.pm_display_cfg.min_vblank_time = amdgpu_dpm_get_vblank_time(adev); /* we have issues with mclk switching with refresh rates over 120 hz on the non-DC code. */ |
