2 files changed, 26 insertions, 15 deletions

diff --git a/drivers/gpio/gpio-merrifield.c b/drivers/gpio/gpio-merrifield.c
index dd67a31ac337..c38624ea0251 100644
--- a/drivers/gpio/gpio-merrifield.c
+++ b/drivers/gpio/gpio-merrifield.c
@@ -9,6 +9,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/acpi.h>
 #include <linux/bitops.h>
 #include <linux/gpio/driver.h>
 #include <linux/init.h>
@@ -380,9 +381,16 @@ static void mrfld_irq_init_hw(struct mrfld_gpio *priv)
 	}
 }
 
+static const char *mrfld_gpio_get_pinctrl_dev_name(void)
+{
+	const char *dev_name = acpi_dev_get_first_match_name("INTC1002", NULL, -1);
+	return dev_name ? dev_name : "pinctrl-merrifield";
+}
+
 static int mrfld_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	const struct mrfld_gpio_pinrange *range;
+	const char *pinctrl_dev_name;
 	struct mrfld_gpio *priv;
 	u32 gpio_base, irq_base;
 	void __iomem *base;
@@ -439,10 +447,11 @@ static int mrfld_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id
 		return retval;
 	}
 
+	pinctrl_dev_name = mrfld_gpio_get_pinctrl_dev_name();
 	for (i = 0; i < ARRAY_SIZE(mrfld_gpio_ranges); i++) {
 		range = &mrfld_gpio_ranges[i];
 		retval = gpiochip_add_pin_range(&priv->chip,
-						"pinctrl-merrifield",
+						pinctrl_dev_name,
 						range->gpio_base,
 						range->pin_base,
 						range->npins);
diff --git a/drivers/gpio/gpio-mmio.c b/drivers/gpio/gpio-mmio.c
index f9042bcc27a4..7b14d6280e44 100644
--- a/drivers/gpio/gpio-mmio.c
+++ b/drivers/gpio/gpio-mmio.c
@@ -152,14 +152,13 @@ static int bgpio_get_set_multiple(struct gpio_chip *gc, unsigned long *mask,
 {
 	unsigned long get_mask = 0;
 	unsigned long set_mask = 0;
-	int bit = 0;
 
-	while ((bit = find_next_bit(mask, gc->ngpio, bit)) != gc->ngpio) {
-		if (gc->bgpio_dir & BIT(bit))
-			set_mask |= BIT(bit);
-		else
-			get_mask |= BIT(bit);
-	}
+	/* Make sure we first clear any bits that are zero when we read the register */
+	*bits &= ~*mask;
+
+	/* Exploit the fact that we know which directions are set */
+	set_mask = *mask & gc->bgpio_dir;
+	get_mask = *mask & ~gc->bgpio_dir;
 
 	if (set_mask)
 		*bits |= gc->read_reg(gc->reg_set) & set_mask;
@@ -176,13 +175,13 @@ static int bgpio_get(struct gpio_chip *gc, unsigned int gpio)
 
 /*
  * This only works if the bits in the GPIO register are in native endianness.
- * It is dirt simple and fast in this case. (Also the most common case.)
  */
 static int bgpio_get_multiple(struct gpio_chip *gc, unsigned long *mask,
 			      unsigned long *bits)
 {
-
-	*bits = gc->read_reg(gc->reg_dat) & *mask;
+	/* Make sure we first clear any bits that are zero when we read the register */
+	*bits &= ~*mask;
+	*bits |= gc->read_reg(gc->reg_dat) & *mask;
 	return 0;
 }
 
@@ -196,9 +195,12 @@ static int bgpio_get_multiple_be(struct gpio_chip *gc, unsigned long *mask,
 	unsigned long val;
 	int bit;
 
+	/* Make sure we first clear any bits that are zero when we read the register */
+	*bits &= ~*mask;
+
 	/* Create a mirrored mask */
-	bit = 0;
-	while ((bit = find_next_bit(mask, gc->ngpio, bit)) != gc->ngpio)
+	bit = -1;
+	while ((bit = find_next_bit(mask, gc->ngpio, bit + 1)) < gc->ngpio)
 		readmask |= bgpio_line2mask(gc, bit);
 
 	/* Read the register */
@@ -208,8 +210,8 @@ static int bgpio_get_multiple_be(struct gpio_chip *gc, unsigned long *mask,
 	 * Mirror the result into the "bits" result, this will give line 0
 	 * in bit 0 ... line 31 in bit 31 for a 32bit register.
 	 */
-	bit = 0;
-	while ((bit = find_next_bit(&val, gc->ngpio, bit)) != gc->ngpio)
+	bit = -1;
+	while ((bit = find_next_bit(&val, gc->ngpio, bit + 1)) < gc->ngpio)
 		*bits |= bgpio_line2mask(gc, bit);
 
 	return 0;