diff options
Diffstat (limited to 'drivers/clocksource')
| -rw-r--r-- | drivers/clocksource/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clocksource/mips-gic-timer.c | 7 | ||||
| -rw-r--r-- | drivers/clocksource/tcb_clksrc.c | 12 | ||||
| -rw-r--r-- | drivers/clocksource/timer-atmel-st.c | 31 | ||||
| -rw-r--r-- | drivers/clocksource/timer-ti-32k.c | 126 |
6 files changed, 171 insertions, 14 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 9ceaef7eb81d..71cfdf7c9708 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -123,6 +123,14 @@ config CLKSRC_PISTACHIO bool select CLKSRC_OF +config CLKSRC_TI_32K + bool "Texas Instruments 32.768 Hz Clocksource" if COMPILE_TEST + depends on GENERIC_SCHED_CLOCK + select CLKSRC_OF if OF + help + This option enables support for Texas Instruments 32.768 Hz clocksource + available on many OMAP-like platforms. + config CLKSRC_STM32 bool "Clocksource for STM32 SoCs" if !ARCH_STM32 depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST) diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index e8aec9dfa597..56bd16e77ae3 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o obj-$(CONFIG_MTK_TIMER) += mtk_timer.o obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o +obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c index 02a1945e5093..89d3e4d7900c 100644 --- a/drivers/clocksource/mips-gic-timer.c +++ b/drivers/clocksource/mips-gic-timer.c @@ -140,9 +140,10 @@ static cycle_t gic_hpt_read(struct clocksource *cs) } static struct clocksource gic_clocksource = { - .name = "GIC", - .read = gic_hpt_read, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .name = "GIC", + .read = gic_hpt_read, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .archdata = { .vdso_clock_mode = VDSO_CLOCK_GIC }, }; static void __init __gic_clocksource_init(void) diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c index d28d2fe798d5..6ee91401918e 100644 --- a/drivers/clocksource/tcb_clksrc.c +++ b/drivers/clocksource/tcb_clksrc.c @@ -193,10 +193,17 @@ static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx) struct clk *t2_clk = tc->clk[2]; int irq = tc->irq[2]; + ret = clk_prepare_enable(tc->slow_clk); + if (ret) + return ret; + /* try to enable t2 clk to avoid future errors in mode change */ ret = clk_prepare_enable(t2_clk); - if (ret) + if (ret) { + clk_disable_unprepare(tc->slow_clk); return ret; + } + clk_disable(t2_clk); clkevt.regs = tc->regs; @@ -208,7 +215,8 @@ static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx) ret = request_irq(irq, ch2_irq, IRQF_TIMER, "tc_clkevt", &clkevt); if (ret) { - clk_disable_unprepare(t2_clk); + clk_unprepare(t2_clk); + clk_disable_unprepare(tc->slow_clk); return ret; } diff --git a/drivers/clocksource/timer-atmel-st.c b/drivers/clocksource/timer-atmel-st.c index 41b7b6dc1d0d..29d21d68df5a 100644 --- a/drivers/clocksource/timer-atmel-st.c +++ b/drivers/clocksource/timer-atmel-st.c @@ -22,6 +22,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/clk.h> #include <linux/clockchips.h> #include <linux/export.h> #include <linux/mfd/syscon.h> @@ -33,9 +34,7 @@ static unsigned long last_crtr; static u32 irqmask; static struct clock_event_device clkevt; static struct regmap *regmap_st; - -#define AT91_SLOW_CLOCK 32768 -#define RM9200_TIMER_LATCH ((AT91_SLOW_CLOCK + HZ/2) / HZ) +static int timer_latch; /* * The ST_CRTR is updated asynchronously to the master clock ... but @@ -82,8 +81,8 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) if (sr & AT91_ST_PITS) { u32 crtr = read_CRTR(); - while (((crtr - last_crtr) & AT91_ST_CRTV) >= RM9200_TIMER_LATCH) { - last_crtr += RM9200_TIMER_LATCH; + while (((crtr - last_crtr) & AT91_ST_CRTV) >= timer_latch) { + last_crtr += timer_latch; clkevt.event_handler(&clkevt); } return IRQ_HANDLED; @@ -144,7 +143,7 @@ static int clkevt32k_set_periodic(struct clock_event_device *dev) /* PIT for periodic irqs; fixed rate of 1/HZ */ irqmask = AT91_ST_PITS; - regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH); + regmap_write(regmap_st, AT91_ST_PIMR, timer_latch); regmap_write(regmap_st, AT91_ST_IER, irqmask); return 0; } @@ -197,7 +196,8 @@ static struct clock_event_device clkevt = { */ static void __init atmel_st_timer_init(struct device_node *node) { - unsigned int val; + struct clk *sclk; + unsigned int sclk_rate, val; int irq, ret; regmap_st = syscon_node_to_regmap(node); @@ -221,6 +221,19 @@ static void __init atmel_st_timer_init(struct device_node *node) if (ret) panic(pr_fmt("Unable to setup IRQ\n")); + sclk = of_clk_get(node, 0); + if (IS_ERR(sclk)) + panic(pr_fmt("Unable to get slow clock\n")); + + clk_prepare_enable(sclk); + if (ret) + panic(pr_fmt("Could not enable slow clock\n")); + + sclk_rate = clk_get_rate(sclk); + if (!sclk_rate) + panic(pr_fmt("Invalid slow clock rate\n")); + timer_latch = (sclk_rate + HZ / 2) / HZ; + /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting * its prescaler from the 1 Hz default. @@ -229,11 +242,11 @@ static void __init atmel_st_timer_init(struct device_node *node) /* Setup timer clockevent, with minimum of two ticks (important!!) */ clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, + clockevents_config_and_register(&clkevt, sclk_rate, 2, AT91_ST_ALMV); /* register clocksource */ - clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); + clocksource_register_hz(&clk32k, sclk_rate); } CLOCKSOURCE_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st", atmel_st_timer_init); diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c new file mode 100644 index 000000000000..8518d9dfba5c --- /dev/null +++ b/drivers/clocksource/timer-ti-32k.c @@ -0,0 +1,126 @@ +/** + * timer-ti-32k.c - OMAP2 32k Timer Support + * + * Copyright (C) 2009 Nokia Corporation + * + * Update to use new clocksource/clockevent layers + * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> + * Copyright (C) 2007 MontaVista Software, Inc. + * + * Original driver: + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * Juha Yrjölä <juha.yrjola@nokia.com> + * OMAP Dual-mode timer framework support by Timo Teras + * + * Some parts based off of TI's 24xx code: + * + * Copyright (C) 2004-2009 Texas Instruments, Inc. + * + * Roughly modelled after the OMAP1 MPU timer code. + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/init.h> +#include <linux/time.h> +#include <linux/sched_clock.h> +#include <linux/clocksource.h> +#include <linux/of.h> +#include <linux/of_address.h> + +/* + * 32KHz clocksource ... always available, on pretty most chips except + * OMAP 730 and 1510. Other timers could be used as clocksources, with + * higher resolution in free-running counter modes (e.g. 12 MHz xtal), + * but systems won't necessarily want to spend resources that way. + */ + +#define OMAP2_32KSYNCNT_REV_OFF 0x0 +#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) +#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10 +#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30 + +struct ti_32k { + void __iomem *base; + void __iomem *counter; + struct clocksource cs; +}; + +static inline struct ti_32k *to_ti_32k(struct clocksource *cs) +{ + return container_of(cs, struct ti_32k, cs); +} + +static cycle_t ti_32k_read_cycles(struct clocksource *cs) +{ + struct ti_32k *ti = to_ti_32k(cs); + + return (cycle_t)readl_relaxed(ti->counter); +} + +static struct ti_32k ti_32k_timer = { + .cs = { + .name = "32k_counter", + .rating = 250, + .read = ti_32k_read_cycles, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS | + CLOCK_SOURCE_SUSPEND_NONSTOP, + }, +}; + +static u64 notrace omap_32k_read_sched_clock(void) +{ + return ti_32k_read_cycles(&ti_32k_timer.cs); +} + +static void __init ti_32k_timer_init(struct device_node *np) +{ + int ret; + + ti_32k_timer.base = of_iomap(np, 0); + if (!ti_32k_timer.base) { + pr_err("Can't ioremap 32k timer base\n"); + return; + } + + ti_32k_timer.counter = ti_32k_timer.base; + + /* + * 32k sync Counter IP register offsets vary between the highlander + * version and the legacy ones. + * + * The 'SCHEME' bits(30-31) of the revision register is used to identify + * the version. + */ + if (readl_relaxed(ti_32k_timer.base + OMAP2_32KSYNCNT_REV_OFF) & + OMAP2_32KSYNCNT_REV_SCHEME) + ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_HIGH; + else + ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW; + + ret = clocksource_register_hz(&ti_32k_timer.cs, 32768); + if (ret) { + pr_err("32k_counter: can't register clocksource\n"); + return; + } + + sched_clock_register(omap_32k_read_sched_clock, 32, 32768); + pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n"); +} +CLOCKSOURCE_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k", + ti_32k_timer_init); |
