29 files changed, 482 insertions, 119 deletions

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index a11f4ba98b05..55c77e44bb2d 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -620,4 +620,22 @@ config RISCV_TIMER
 	  is accessed via both the SBI and the rdcycle instruction.  This is
 	  required for all RISC-V systems.
 
+config CSKY_MP_TIMER
+	bool "SMP Timer for the C-SKY platform" if COMPILE_TEST
+	depends on CSKY
+	select TIMER_OF
+	help
+	  Say yes here to enable C-SKY SMP timer driver used for C-SKY SMP
+	  system.
+	  csky,mptimer is not only used in SMP system, it also could be used
+	  single core system. It's not a mmio reg and it use mtcr/mfcr instruction.
+
+config GX6605S_TIMER
+	bool "Gx6605s SOC system timer driver" if COMPILE_TEST
+	depends on CSKY
+	select CLKSRC_MMIO
+	select TIMER_OF
+	help
+	  This option enables support for gx6605s SOC's timer.
+
 endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index db51b2427e8a..dd9138104568 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -23,8 +23,8 @@ obj-$(CONFIG_FTTMR010_TIMER)	+= timer-fttmr010.o
 obj-$(CONFIG_ROCKCHIP_TIMER)      += rockchip_timer.o
 obj-$(CONFIG_CLKSRC_NOMADIK_MTU)	+= nomadik-mtu.o
 obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
-obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o
-obj-$(CONFIG_ORION_TIMER)	+= time-orion.o
+obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= timer-armada-370-xp.o
+obj-$(CONFIG_ORION_TIMER)	+= timer-orion.o
 obj-$(CONFIG_BCM2835_TIMER)	+= bcm2835_timer.o
 obj-$(CONFIG_CLPS711X_TIMER)	+= clps711x-timer.o
 obj-$(CONFIG_ATLAS7_TIMER)	+= timer-atlas7.o
@@ -36,25 +36,25 @@ obj-$(CONFIG_SUN4I_TIMER)	+= sun4i_timer.o
 obj-$(CONFIG_SUN5I_HSTIMER)	+= timer-sun5i.o
 obj-$(CONFIG_MESON6_TIMER)	+= meson6_timer.o
 obj-$(CONFIG_TEGRA_TIMER)	+= tegra20_timer.o
-obj-$(CONFIG_VT8500_TIMER)	+= vt8500_timer.o
-obj-$(CONFIG_NSPIRE_TIMER)	+= zevio-timer.o
+obj-$(CONFIG_VT8500_TIMER)	+= timer-vt8500.o
+obj-$(CONFIG_NSPIRE_TIMER)	+= timer-zevio.o
 obj-$(CONFIG_BCM_KONA_TIMER)	+= bcm_kona_timer.o
-obj-$(CONFIG_CADENCE_TTC_TIMER)	+= cadence_ttc_timer.o
-obj-$(CONFIG_CLKSRC_EFM32)	+= time-efm32.o
+obj-$(CONFIG_CADENCE_TTC_TIMER)	+= timer-cadence-ttc.o
+obj-$(CONFIG_CLKSRC_EFM32)	+= timer-efm32.o
 obj-$(CONFIG_CLKSRC_STM32)	+= timer-stm32.o
 obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
-obj-$(CONFIG_CLKSRC_LPC32XX)	+= time-lpc32xx.o
+obj-$(CONFIG_CLKSRC_LPC32XX)	+= timer-lpc32xx.o
 obj-$(CONFIG_CLKSRC_MPS2)	+= mps2-timer.o
 obj-$(CONFIG_CLKSRC_SAMSUNG_PWM)	+= samsung_pwm_timer.o
-obj-$(CONFIG_FSL_FTM_TIMER)	+= fsl_ftm_timer.o
-obj-$(CONFIG_VF_PIT_TIMER)	+= vf_pit_timer.o
-obj-$(CONFIG_CLKSRC_QCOM)	+= qcom-timer.o
+obj-$(CONFIG_FSL_FTM_TIMER)	+= timer-fsl-ftm.o
+obj-$(CONFIG_VF_PIT_TIMER)	+= timer-vf-pit.o
+obj-$(CONFIG_CLKSRC_QCOM)	+= timer-qcom.o
 obj-$(CONFIG_MTK_TIMER)		+= timer-mediatek.o
-obj-$(CONFIG_CLKSRC_PISTACHIO)	+= time-pistachio.o
+obj-$(CONFIG_CLKSRC_PISTACHIO)	+= timer-pistachio.o
 obj-$(CONFIG_CLKSRC_TI_32K)	+= timer-ti-32k.o
 obj-$(CONFIG_CLKSRC_NPS)	+= timer-nps.o
 obj-$(CONFIG_OXNAS_RPS_TIMER)	+= timer-oxnas-rps.o
-obj-$(CONFIG_OWL_TIMER)		+= owl-timer.o
+obj-$(CONFIG_OWL_TIMER)		+= timer-owl.o
 obj-$(CONFIG_SPRD_TIMER)	+= timer-sprd.o
 obj-$(CONFIG_NPCM7XX_TIMER)	+= timer-npcm7xx.o
 
@@ -66,7 +66,7 @@ obj-$(CONFIG_ARM_TIMER_SP804)		+= timer-sp804.o
 obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST)	+= dummy_timer.o
 obj-$(CONFIG_KEYSTONE_TIMER)		+= timer-keystone.o
 obj-$(CONFIG_INTEGRATOR_AP_TIMER)	+= timer-integrator-ap.o
-obj-$(CONFIG_CLKSRC_VERSATILE)		+= versatile.o
+obj-$(CONFIG_CLKSRC_VERSATILE)		+= timer-versatile.o
 obj-$(CONFIG_CLKSRC_MIPS_GIC)		+= mips-gic-timer.o
 obj-$(CONFIG_CLKSRC_TANGO_XTAL)		+= tango_xtal.o
 obj-$(CONFIG_CLKSRC_IMX_GPT)		+= timer-imx-gpt.o
@@ -79,3 +79,5 @@ obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
 obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
 obj-$(CONFIG_ATCPIT100_TIMER)		+= timer-atcpit100.o
 obj-$(CONFIG_RISCV_TIMER)		+= riscv_timer.o
+obj-$(CONFIG_CSKY_MP_TIMER)		+= timer-mp-csky.o
+obj-$(CONFIG_GX6605S_TIMER)		+= timer-gx6605s.o
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index d8c7f5750cdb..9a7d4dc00b6e 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -319,6 +319,13 @@ static u64 notrace arm64_858921_read_cntvct_el0(void)
 }
 #endif
 
+#ifdef CONFIG_ARM64_ERRATUM_1188873
+static u64 notrace arm64_1188873_read_cntvct_el0(void)
+{
+	return read_sysreg(cntvct_el0);
+}
+#endif
+
 #ifdef CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND
 DEFINE_PER_CPU(const struct arch_timer_erratum_workaround *, timer_unstable_counter_workaround);
 EXPORT_SYMBOL_GPL(timer_unstable_counter_workaround);
@@ -408,6 +415,14 @@ static const struct arch_timer_erratum_workaround ool_workarounds[] = {
 		.read_cntvct_el0 = arm64_858921_read_cntvct_el0,
 	},
 #endif
+#ifdef CONFIG_ARM64_ERRATUM_1188873
+	{
+		.match_type = ate_match_local_cap_id,
+		.id = (void *)ARM64_WORKAROUND_1188873,
+		.desc = "ARM erratum 1188873",
+		.read_cntvct_el0 = arm64_1188873_read_cntvct_el0,
+	},
+#endif
 };
 
 typedef bool (*ate_match_fn_t)(const struct arch_timer_erratum_workaround *,
diff --git a/drivers/clocksource/asm9260_timer.c b/drivers/clocksource/asm9260_timer.c
index 38cd2feb87c4..fbaee04fd1d9 100644
--- a/drivers/clocksource/asm9260_timer.c
+++ b/drivers/clocksource/asm9260_timer.c
@@ -193,7 +193,7 @@ static int __init asm9260_timer_init(struct device_node *np)
 
 	priv.base = of_io_request_and_map(np, 0, np->name);
 	if (IS_ERR(priv.base)) {
-		pr_err("%s: unable to map resource\n", np->name);
+		pr_err("%pOFn: unable to map resource\n", np);
 		return PTR_ERR(priv.base);
 	}
 
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index 69866cd8f4bb..db410acd8964 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -22,6 +22,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/clk.h>
+#include <linux/reset.h>
 #include <linux/sched_clock.h>
 
 static void __init timer_get_base_and_rate(struct device_node *np,
@@ -29,11 +30,22 @@ static void __init timer_get_base_and_rate(struct device_node *np,
 {
 	struct clk *timer_clk;
 	struct clk *pclk;
+	struct reset_control *rstc;
 
 	*base = of_iomap(np, 0);
 
 	if (!*base)
-		panic("Unable to map regs for %s", np->name);
+		panic("Unable to map regs for %pOFn", np);
+
+	/*
+	 * Reset the timer if the reset control is available, wiping
+	 * out the state the firmware may have left it
+	 */
+	rstc = of_reset_control_get(np, NULL);
+	if (!IS_ERR(rstc)) {
+		reset_control_assert(rstc);
+		reset_control_deassert(rstc);
+	}
 
 	/*
 	 * Not all implementations use a periphal clock, so don't panic
@@ -42,8 +54,8 @@ static void __init timer_get_base_and_rate(struct device_node *np,
 	pclk = of_clk_get_by_name(np, "pclk");
 	if (!IS_ERR(pclk))
 		if (clk_prepare_enable(pclk))
-			pr_warn("pclk for %s is present, but could not be activated\n",
-				np->name);
+			pr_warn("pclk for %pOFn is present, but could not be activated\n",
+				np);
 
 	timer_clk = of_clk_get_by_name(np, "timer");
 	if (IS_ERR(timer_clk))
@@ -57,7 +69,7 @@ static void __init timer_get_base_and_rate(struct device_node *np,
 try_clock_freq:
 	if (of_property_read_u32(np, "clock-freq", rate) &&
 	    of_property_read_u32(np, "clock-frequency", rate))
-		panic("No clock nor clock-frequency property for %s", np->name);
+		panic("No clock nor clock-frequency property for %pOFn", np);
 }
 
 static void __init add_clockevent(struct device_node *event_timer)
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
index 9c38895542f4..d4350bb10b83 100644
--- a/drivers/clocksource/i8253.c
+++ b/drivers/clocksource/i8253.c
@@ -20,6 +20,13 @@
 DEFINE_RAW_SPINLOCK(i8253_lock);
 EXPORT_SYMBOL(i8253_lock);
 
+/*
+ * Handle PIT quirk in pit_shutdown() where zeroing the counter register
+ * restarts the PIT, negating the shutdown. On platforms with the quirk,
+ * platform specific code can set this to false.
+ */
+bool i8253_clear_counter_on_shutdown __ro_after_init = true;
+
 #ifdef CONFIG_CLKSRC_I8253
 /*
  * Since the PIT overflows every tick, its not very useful
@@ -109,8 +116,11 @@ static int pit_shutdown(struct clock_event_device *evt)
 	raw_spin_lock(&i8253_lock);
 
 	outb_p(0x30, PIT_MODE);
-	outb_p(0, PIT_CH0);
-	outb_p(0, PIT_CH0);
+
+	if (i8253_clear_counter_on_shutdown) {
+		outb_p(0, PIT_CH0);
+		outb_p(0, PIT_CH0);
+	}
 
 	raw_spin_unlock(&i8253_lock);
 	return 0;
diff --git a/drivers/clocksource/pxa_timer.c b/drivers/clocksource/pxa_timer.c
index 08cd6eaf3795..395837938301 100644
--- a/drivers/clocksource/pxa_timer.c
+++ b/drivers/clocksource/pxa_timer.c
@@ -191,13 +191,13 @@ static int __init pxa_timer_dt_init(struct device_node *np)
 	/* timer registers are shared with watchdog timer */
 	timer_base = of_iomap(np, 0);
 	if (!timer_base) {
-		pr_err("%s: unable to map resource\n", np->name);
+		pr_err("%pOFn: unable to map resource\n", np);
 		return -ENXIO;
 	}
 
 	clk = of_clk_get(np, 0);
 	if (IS_ERR(clk)) {
-		pr_crit("%s: unable to get clk\n", np->name);
+		pr_crit("%pOFn: unable to get clk\n", np);
 		return PTR_ERR(clk);
 	}
 
@@ -210,7 +210,7 @@ static int __init pxa_timer_dt_init(struct device_node *np)
 	/* we are only interested in OS-timer0 irq */
 	irq = irq_of_parse_and_map(np, 0);
 	if (irq <= 0) {
-		pr_crit("%s: unable to parse OS-timer0 irq\n", np->name);
+		pr_crit("%pOFn: unable to parse OS-timer0 irq\n", np);
 		return -EINVAL;
 	}
 
diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c
index 6cffd7c6001a..61d5f3b539ce 100644
--- a/drivers/clocksource/renesas-ostm.c
+++ b/drivers/clocksource/renesas-ostm.c
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Renesas Timer Support - OSTM
  *
  * Copyright (C) 2017 Renesas Electronics America, Inc.
  * Copyright (C) 2017 Chris Brandt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/of_address.h>
diff --git a/drivers/clocksource/riscv_timer.c b/drivers/clocksource/riscv_timer.c
index 4e8b347e43e2..084e97dc10ed 100644
--- a/drivers/clocksource/riscv_timer.c
+++ b/drivers/clocksource/riscv_timer.c
@@ -8,6 +8,7 @@
 #include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
+#include <asm/smp.h>
 #include <asm/sbi.h>
 
 /*
@@ -84,13 +85,16 @@ void riscv_timer_interrupt(void)
 
 static int __init riscv_timer_init_dt(struct device_node *n)
 {
-	int cpu_id = riscv_of_processor_hart(n), error;
+	int cpuid, hartid, error;
 	struct clocksource *cs;
 
-	if (cpu_id != smp_processor_id())
+	hartid = riscv_of_processor_hartid(n);
+	cpuid = riscv_hartid_to_cpuid(hartid);
+
+	if (cpuid != smp_processor_id())
 		return 0;
 
-	cs = per_cpu_ptr(&riscv_clocksource, cpu_id);
+	cs = per_cpu_ptr(&riscv_clocksource, cpuid);
 	clocksource_register_hz(cs, riscv_timebase);
 
 	error = cpuhp_setup_state(CPUHP_AP_RISCV_TIMER_STARTING,
@@ -98,7 +102,7 @@ static int __init riscv_timer_init_dt(struct device_node *n)
 			 riscv_timer_starting_cpu, riscv_timer_dying_cpu);
 	if (error)
 		pr_err("RISCV timer register failed [%d] for cpu = [%d]\n",
-		       error, cpu_id);
+		       error, cpuid);
 	return error;
 }
 
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index bbbf37c471a3..55d3e03f2cd4 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * SuperH Timer Support - CMT
  *
  *  Copyright (C) 2008 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/clk.h>
@@ -78,18 +70,17 @@ struct sh_cmt_info {
 	unsigned int channels_mask;
 
 	unsigned long width; /* 16 or 32 bit version of hardware block */
-	unsigned long overflow_bit;
-	unsigned long clear_bits;
+	u32 overflow_bit;
+	u32 clear_bits;
 
 	/* callbacks for CMSTR and CMCSR access */
-	unsigned long (*read_control)(void __iomem *base, unsigned long offs);
+	u32 (*read_control)(void __iomem *base, unsigned long offs);
 	void (*write_control)(void __iomem *base, unsigned long offs,
-			      unsigned long value);
+			      u32 value);
 
 	/* callbacks for CMCNT and CMCOR access */
-	unsigned long (*read_count)(void __iomem *base, unsigned long offs);
-	void (*write_count)(void __iomem *base, unsigned long offs,
-			    unsigned long value);
+	u32 (*read_count)(void __iomem *base, unsigned long offs);
+	void (*write_count)(void __iomem *base, unsigned long offs, u32 value);
 };
 
 struct sh_cmt_channel {
@@ -103,13 +94,13 @@ struct sh_cmt_channel {
 
 	unsigned int timer_bit;
 	unsigned long flags;
-	unsigned long match_value;
-	unsigned long next_match_value;
-	unsigned long max_match_value;
+	u32 match_value;
+	u32 next_match_value;
+	u32 max_match_value;
 	raw_spinlock_t lock;
 	struct clock_event_device ced;
 	struct clocksource cs;
-	unsigned long total_cycles;
+	u64 total_cycles;
 	bool cs_enabled;
 };
 
@@ -160,24 +151,22 @@ struct sh_cmt_device {
 #define SH_CMT32_CMCSR_CKS_RCLK1	(7 << 0)
 #define SH_CMT32_CMCSR_CKS_MASK		(7 << 0)
 
-static unsigned long sh_cmt_read16(void __iomem *base, unsigned long offs)
+static u32 sh_cmt_read16(void __iomem *base, unsigned long offs)
 {
 	return ioread16(base + (offs << 1));
 }
 
-static unsigned long sh_cmt_read32(void __iomem *base, unsigned long offs)
+static u32 sh_cmt_read32(void __iomem *base, unsigned long offs)
 {
 	return ioread32(base + (offs << 2));
 }
 
-static void sh_cmt_write16(void __iomem *base, unsigned long offs,
-			   unsigned long value)
+static void sh_cmt_write16(void __iomem *base, unsigned long offs, u32 value)
 {
 	iowrite16(value, base + (offs << 1));
 }
 
-static void sh_cmt_write32(void __iomem *base, unsigned long offs,
-			   unsigned long value)
+static void sh_cmt_write32(void __iomem *base, unsigned long offs, u32 value)
 {
 	iowrite32(value, base + (offs << 2));
 }
@@ -242,7 +231,7 @@ static const struct sh_cmt_info sh_cmt_info[] = {
 #define CMCNT 1 /* channel register */
 #define CMCOR 2 /* channel register */
 
-static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_channel *ch)
+static inline u32 sh_cmt_read_cmstr(struct sh_cmt_channel *ch)
 {
 	if (ch->iostart)
 		return ch->cmt->info->read_control(ch->iostart, 0);
@@ -250,8 +239,7 @@ static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_channel *ch)
 		return ch->cmt->info->read_control(ch->cmt->mapbase, 0);
 }
 
-static inline void sh_cmt_write_cmstr(struct sh_cmt_channel *ch,
-				      unsigned long value)
+static inline void sh_cmt_write_cmstr(struct sh_cmt_channel *ch, u32 value)
 {
 	if (ch->iostart)
 		ch->cmt->info->write_control(ch->iostart, 0, value);
@@ -259,39 +247,35 @@ static inline void sh_cmt_write_cmstr(struct sh_cmt_channel *ch,
 		ch->cmt->info->write_control(ch->cmt->mapbase, 0, value);
 }
 
-static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_channel *ch)
+static inline u32 sh_cmt_read_cmcsr(struct sh_cmt_channel *ch)
 {
 	return ch->cmt->info->read_control(ch->ioctrl, CMCSR);
 }
 
-static inline void sh_cmt_write_cmcsr(struct sh_cmt_channel *ch,
-				      unsigned long value)
+static inline void sh_cmt_write_cmcsr(struct sh_cmt_channel *ch, u32 value)
 {
 	ch->cmt->info->write_control(ch->ioctrl, CMCSR, value);
 }
 
-static inline unsigned long sh_cmt_read_cmcnt(struct sh_cmt_channel *ch)
+static inline u32 sh_cmt_read_cmcnt(struct sh_cmt_channel *ch)
 {
 	return ch->cmt->info->read_count(ch->ioctrl, CMCNT);
 }
 
-static inline void sh_cmt_write_cmcnt(struct sh_cmt_channel *ch,
-				      unsigned long value)
+static inline void sh_cmt_write_cmcnt(struct sh_cmt_channel *ch, u32 value)
 {
 	ch->cmt->info->write_count(ch->ioctrl, CMCNT, value);
 }
 
-static inline void sh_cmt_write_cmcor(struct sh_cmt_channel *ch,
-				      unsigned long value)
+static inline void sh_cmt_write_cmcor(struct sh_cmt_channel *ch, u32 value)
 {
 	ch->cmt->info->write_count(ch->ioctrl, CMCOR, value);
 }
 
-static unsigned long sh_cmt_get_counter(struct sh_cmt_channel *ch,
-					int *has_wrapped)
+static u32 sh_cmt_get_counter(struct sh_cmt_channel *ch, u32 *has_wrapped)
 {
-	unsigned long v1, v2, v3;
-	int o1, o2;
+	u32 v1, v2, v3;
+	u32 o1, o2;
 
 	o1 = sh_cmt_read_cmcsr(ch) & ch->cmt->info->overflow_bit;
 
@@ -311,7 +295,8 @@ static unsigned long sh_cmt_get_counter(struct sh_cmt_channel *ch,
 
 static void sh_cmt_start_stop_ch(struct sh_cmt_channel *ch, int start)
 {
-	unsigned long flags, value;
+	unsigned long flags;
+	u32 value;
 
 	/* start stop register shared by multiple timer channels */
 	raw_spin_lock_irqsave(&ch->cmt->lock, flags);
@@ -418,11 +403,11 @@ static void sh_cmt_disable(struct sh_cmt_channel *ch)
 static void sh_cmt_clock_event_program_verify(struct sh_cmt_channel *ch,
 					      int absolute)
 {
-	unsigned long new_match;
-	unsigned long value = ch->next_match_value;
-	unsigned long delay = 0;
-	unsigned long now = 0;
-	int has_wrapped;
+	u32 value = ch->next_match_value;
+	u32 new_match;
+	u32 delay = 0;
+	u32 now = 0;
+	u32 has_wrapped;
 
 	now = sh_cmt_get_counter(ch, &has_wrapped);
 	ch->flags |= FLAG_REPROGRAM; /* force reprogram */
@@ -619,9 +604,10 @@ static struct sh_cmt_channel *cs_to_sh_cmt(struct clocksource *cs)
 static u64 sh_cmt_clocksource_read(struct clocksource *cs)
 {
 	struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
-	unsigned long flags, raw;
-	unsigned long value;
-	int has_wrapped;
+	unsigned long flags;
+	u32 has_wrapped;
+	u64 value;
+	u32 raw;
 
 	raw_spin_lock_irqsave(&ch->lock, flags);
 	value = ch->total_cycles;
@@ -694,7 +680,7 @@ static int sh_cmt_register_clocksource(struct sh_cmt_channel *ch,
 	cs->disable = sh_cmt_clocksource_disable;
 	cs->suspend = sh_cmt_clocksource_suspend;
 	cs->resume = sh_cmt_clocksource_resume;
-	cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
+	cs->mask = CLOCKSOURCE_MASK(sizeof(u64) * 8);
 	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
 
 	dev_info(&ch->cmt->pdev->dev, "ch%u: used as clock source\n",
@@ -941,8 +927,22 @@ static const struct of_device_id sh_cmt_of_table[] __maybe_unused = {
 		.compatible = "renesas,cmt-48-gen2",
 		.data = &sh_cmt_info[SH_CMT0_RCAR_GEN2]
 	},
-	{ .compatible = "renesas,rcar-gen2-cmt0", .data = &sh_cmt_info[SH_CMT0_RCAR_GEN2] },
-	{ .compatible = "renesas,rcar-gen2-cmt1", .data = &sh_cmt_info[SH_CMT1_RCAR_GEN2] },
+	{
+		.compatible = "renesas,rcar-gen2-cmt0",
+		.data = &sh_cmt_info[SH_CMT0_RCAR_GEN2]
+	},
+	{
+		.compatible = "renesas,rcar-gen2-cmt1",
+		.data = &sh_cmt_info[SH_CMT1_RCAR_GEN2]
+	},
+	{
+		.compatible = "renesas,rcar-gen3-cmt0",
+		.data = &sh_cmt_info[SH_CMT0_RCAR_GEN2]
+	},
+	{
+		.compatible = "renesas,rcar-gen3-cmt1",
+		.data = &sh_cmt_info[SH_CMT1_RCAR_GEN2]
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sh_cmt_of_table);
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index 6812e099b6a3..354b27d14a19 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * SuperH Timer Support - MTU2
  *
  *  Copyright (C) 2009 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/clk.h>
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index c74a6c543ca2..49f1c805fc95 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * SuperH Timer Support - TMU
  *
  *  Copyright (C) 2009 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/clk.h>
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/timer-armada-370-xp.c
index edf1a46269f1..edf1a46269f1 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/timer-armada-370-xp.c
diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/timer-cadence-ttc.c
index 29d51755e18b..b33402980b6f 100644
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/timer-cadence-ttc.c
@@ -535,7 +535,7 @@ static int __init ttc_timer_init(struct device_node *timer)
 	if (ret)
 		return ret;
 
-	pr_info("%s #0 at %p, irq=%d\n", timer->name, timer_baseaddr, irq);
+	pr_info("%pOFn #0 at %p, irq=%d\n", timer, timer_baseaddr, irq);
 
 	return 0;
 }
diff --git a/drivers/clocksource/time-efm32.c b/drivers/clocksource/timer-efm32.c
index 257e810ec1ad..257e810ec1ad 100644
--- a/drivers/clocksource/time-efm32.c
+++ b/drivers/clocksource/timer-efm32.c
diff --git a/drivers/clocksource/fsl_ftm_timer.c b/drivers/clocksource/timer-fsl-ftm.c
index 846d18daf893..846d18daf893 100644
--- a/drivers/clocksource/fsl_ftm_timer.c
+++ b/drivers/clocksource/timer-fsl-ftm.c
diff --git a/drivers/clocksource/timer-gx6605s.c b/drivers/clocksource/timer-gx6605s.c
new file mode 100644
index 000000000000..80d0939d040b
--- /dev/null
+++ b/drivers/clocksource/timer-gx6605s.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched_clock.h>
+
+#include "timer-of.h"
+
+#define CLKSRC_OFFSET	0x40
+
+#define TIMER_STATUS	0x00
+#define TIMER_VALUE	0x04
+#define TIMER_CONTRL	0x10
+#define TIMER_CONFIG	0x20
+#define TIMER_DIV	0x24
+#define TIMER_INI	0x28
+
+#define GX6605S_STATUS_CLR	BIT(0)
+#define GX6605S_CONTRL_RST	BIT(0)
+#define GX6605S_CONTRL_START	BIT(1)
+#define GX6605S_CONFIG_EN	BIT(0)
+#define GX6605S_CONFIG_IRQ_EN	BIT(1)
+
+static irqreturn_t gx6605s_timer_interrupt(int irq, void *dev)
+{
+	struct clock_event_device *ce = dev;
+	void __iomem *base = timer_of_base(to_timer_of(ce));
+
+	writel_relaxed(GX6605S_STATUS_CLR, base + TIMER_STATUS);
+
+	ce->event_handler(ce);
+
+	return IRQ_HANDLED;
+}
+
+static int gx6605s_timer_set_oneshot(struct clock_event_device *ce)
+{
+	void __iomem *base = timer_of_base(to_timer_of(ce));
+
+	/* reset and stop counter */
+	writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL);
+
+	/* enable with irq and start */
+	writel_relaxed(GX6605S_CONFIG_EN | GX6605S_CONFIG_IRQ_EN,
+		       base + TIMER_CONFIG);
+
+	return 0;
+}
+
+static int gx6605s_timer_set_next_event(unsigned long delta,
+					struct clock_event_device *ce)
+{
+	void __iomem *base = timer_of_base(to_timer_of(ce));
+
+	/* use reset to pause timer */
+	writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL);
+
+	/* config next timeout value */
+	writel_relaxed(ULONG_MAX - delta, base + TIMER_INI);
+	writel_relaxed(GX6605S_CONTRL_START, base + TIMER_CONTRL);
+
+	return 0;
+}
+
+static int gx6605s_timer_shutdown(struct clock_event_device *ce)
+{
+	void __iomem *base = timer_of_base(to_timer_of(ce));
+
+	writel_relaxed(0, base + TIMER_CONTRL);
+	writel_relaxed(0, base + TIMER_CONFIG);
+
+	return 0;
+}
+
+static struct timer_of to = {
+	.flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
+	.clkevt = {
+		.rating			= 300,
+		.features		= CLOCK_EVT_FEAT_DYNIRQ |
+					  CLOCK_EVT_FEAT_ONESHOT,
+		.set_state_shutdown	= gx6605s_timer_shutdown,
+		.set_state_oneshot	= gx6605s_timer_set_oneshot,
+		.set_next_event		= gx6605s_timer_set_next_event,
+		.cpumask		= cpu_possible_mask,
+	},
+	.of_irq = {
+		.handler		= gx6605s_timer_interrupt,
+		.flags			= IRQF_TIMER | IRQF_IRQPOLL,
+	},
+};
+
+static u64 notrace gx6605s_sched_clock_read(void)
+{
+	void __iomem *base;
+
+	base = timer_of_base(&to) + CLKSRC_OFFSET;
+
+	return (u64)readl_relaxed(base + TIMER_VALUE);
+}
+
+static void gx6605s_clkevt_init(void __iomem *base)
+{
+	writel_relaxed(0, base + TIMER_DIV);
+	writel_relaxed(0, base + TIMER_CONFIG);
+
+	clockevents_config_and_register(&to.clkevt, timer_of_rate(&to), 2,
+					ULONG_MAX);
+}
+
+static int gx6605s_clksrc_init(void __iomem *base)
+{
+	writel_relaxed(0, base + TIMER_DIV);
+	writel_relaxed(0, base + TIMER_INI);
+
+	writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL);
+
+	writel_relaxed(GX6605S_CONFIG_EN, base + TIMER_CONFIG);
+
+	writel_relaxed(GX6605S_CONTRL_START, base + TIMER_CONTRL);
+
+	sched_clock_register(gx6605s_sched_clock_read, 32, timer_of_rate(&to));
+
+	return clocksource_mmio_init(base + TIMER_VALUE, "gx6605s",
+			timer_of_rate(&to), 200, 32, clocksource_mmio_readl_up);
+}
+
+static int __init gx6605s_timer_init(struct device_node *np)
+{
+	int ret;
+
+	/*
+	 * The timer driver is for nationalchip gx6605s SOC and there are two
+	 * same timer in gx6605s. We use one for clkevt and another for clksrc.
+	 *
+	 * The timer is mmio map to access, so we need give mmio address in dts.
+	 *
+	 * It provides a 32bit countup timer and interrupt will be caused by
+	 * count-overflow.
+	 * So we need set-next-event by ULONG_MAX - delta in TIMER_INI reg.
+	 *
+	 * The counter at 0x0  offset is clock event.
+	 * The counter at 0x40 offset is clock source.
+	 * They are the same in hardware, just different used by driver.
+	 */
+	ret = timer_of_init(np, &to);
+	if (ret)
+		return ret;
+
+	gx6605s_clkevt_init(timer_of_base(&to));
+
+	return gx6605s_clksrc_init(timer_of_base(&to) + CLKSRC_OFFSET);
+}
+TIMER_OF_DECLARE(csky_gx6605s_timer, "csky,gx6605s-timer", gx6605s_timer_init);
diff --git a/drivers/clocksource/timer-integrator-ap.c b/drivers/clocksource/timer-integrator-ap.c
index 62d24690ba02..76e526f58620 100644
--- a/drivers/clocksource/timer-integrator-ap.c
+++ b/drivers/clocksource/timer-integrator-ap.c
@@ -190,7 +190,7 @@ static int __init integrator_ap_timer_init_of(struct device_node *node)
 
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk)) {
-		pr_err("No clock for %s\n", node->name);
+		pr_err("No clock for %pOFn\n", node);
 		return PTR_ERR(clk);
 	}
 	clk_prepare_enable(clk);
diff --git a/drivers/clocksource/time-lpc32xx.c b/drivers/clocksource/timer-lpc32xx.c
index d51a62a79ef7..d51a62a79ef7 100644
--- a/drivers/clocksource/time-lpc32xx.c
+++ b/drivers/clocksource/timer-lpc32xx.c
diff --git a/drivers/clocksource/timer-mp-csky.c b/drivers/clocksource/timer-mp-csky.c
new file mode 100644
index 000000000000..a8acc431a774
--- /dev/null
+++ b/drivers/clocksource/timer-mp-csky.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched_clock.h>
+#include <linux/cpu.h>
+#include <linux/of_irq.h>
+#include <asm/reg_ops.h>
+
+#include "timer-of.h"
+
+#define PTIM_CCVR	"cr<3, 14>"
+#define PTIM_CTLR	"cr<0, 14>"
+#define PTIM_LVR	"cr<6, 14>"
+#define PTIM_TSR	"cr<1, 14>"
+
+static int csky_mptimer_irq;
+
+static int csky_mptimer_set_next_event(unsigned long delta,
+				       struct clock_event_device *ce)
+{
+	mtcr(PTIM_LVR, delta);
+
+	return 0;
+}
+
+static int csky_mptimer_shutdown(struct clock_event_device *ce)
+{
+	mtcr(PTIM_CTLR, 0);
+
+	return 0;
+}
+
+static int csky_mptimer_oneshot(struct clock_event_device *ce)
+{
+	mtcr(PTIM_CTLR, 1);
+
+	return 0;
+}
+
+static int csky_mptimer_oneshot_stopped(struct clock_event_device *ce)
+{
+	mtcr(PTIM_CTLR, 0);
+
+	return 0;
+}
+
+static DEFINE_PER_CPU(struct timer_of, csky_to) = {
+	.flags					= TIMER_OF_CLOCK,
+	.clkevt = {
+		.rating				= 300,
+		.features			= CLOCK_EVT_FEAT_PERCPU |
+						  CLOCK_EVT_FEAT_ONESHOT,
+		.set_state_shutdown		= csky_mptimer_shutdown,
+		.set_state_oneshot		= csky_mptimer_oneshot,
+		.set_state_oneshot_stopped	= csky_mptimer_oneshot_stopped,
+		.set_next_event			= csky_mptimer_set_next_event,
+	},
+};
+
+static irqreturn_t csky_timer_interrupt(int irq, void *dev)
+{
+	struct timer_of *to = this_cpu_ptr(&csky_to);
+
+	mtcr(PTIM_TSR, 0);
+
+	to->clkevt.event_handler(&to->clkevt);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * clock event for percpu
+ */
+static int csky_mptimer_starting_cpu(unsigned int cpu)
+{
+	struct timer_of *to = per_cpu_ptr(&csky_to, cpu);
+
+	to->clkevt.cpumask = cpumask_of(cpu);
+
+	clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
+					2, ULONG_MAX);
+
+	enable_percpu_irq(csky_mptimer_irq, 0);
+
+	return 0;
+}
+
+static int csky_mptimer_dying_cpu(unsigned int cpu)
+{
+	disable_percpu_irq(csky_mptimer_irq);
+
+	return 0;
+}
+
+/*
+ * clock source
+ */
+static u64 sched_clock_read(void)
+{
+	return (u64)mfcr(PTIM_CCVR);
+}
+
+static u64 clksrc_read(struct clocksource *c)
+{
+	return (u64)mfcr(PTIM_CCVR);
+}
+
+struct clocksource csky_clocksource = {
+	.name	= "csky",
+	.rating	= 400,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+	.read	= clksrc_read,
+};
+
+static int __init csky_mptimer_init(struct device_node *np)
+{
+	int ret, cpu, cpu_rollback;
+	struct timer_of *to = NULL;
+
+	/*
+	 * Csky_mptimer is designed for C-SKY SMP multi-processors and
+	 * every core has it's own private irq and regs for clkevt and
+	 * clksrc.
+	 *
+	 * The regs is accessed by cpu instruction: mfcr/mtcr instead of
+	 * mmio map style. So we needn't mmio-address in dts, but we still
+	 * need to give clk and irq number.
+	 *
+	 * We use private irq for the mptimer and irq number is the same
+	 * for every core. So we use request_percpu_irq() in timer_of_init.
+	 */
+	csky_mptimer_irq = irq_of_parse_and_map(np, 0);
+	if (csky_mptimer_irq <= 0)
+		return -EINVAL;
+
+	ret = request_percpu_irq(csky_mptimer_irq, csky_timer_interrupt,
+				 "csky_mp_timer", &csky_to);
+	if (ret)
+		return -EINVAL;
+
+	for_each_possible_cpu(cpu) {
+		to = per_cpu_ptr(&csky_to, cpu);
+		ret = timer_of_init(np, to);
+		if (ret)
+			goto rollback;
+	}
+
+	clocksource_register_hz(&csky_clocksource, timer_of_rate(to));
+	sched_clock_register(sched_clock_read, 32, timer_of_rate(to));
+
+	ret = cpuhp_setup_state(CPUHP_AP_CSKY_TIMER_STARTING,
+				"clockevents/csky/timer:starting",
+				csky_mptimer_starting_cpu,
+				csky_mptimer_dying_cpu);
+	if (ret)
+		return -EINVAL;
+
+	return 0;
+
+rollback:
+	for_each_possible_cpu(cpu_rollback) {
+		if (cpu_rollback == cpu)
+			break;
+
+		to = per_cpu_ptr(&csky_to, cpu_rollback);
+		timer_of_cleanup(to);
+	}
+	return -EINVAL;
+}
+TIMER_OF_DECLARE(csky_mptimer, "csky,mptimer", csky_mptimer_init);
diff --git a/drivers/clocksource/time-orion.c b/drivers/clocksource/timer-orion.c
index 12202067fe4b..7d487107e3cd 100644
--- a/drivers/clocksource/time-orion.c
+++ b/drivers/clocksource/timer-orion.c
@@ -129,13 +129,13 @@ static int __init orion_timer_init(struct device_node *np)
 	/* timer registers are shared with watchdog timer */
 	timer_base = of_iomap(np, 0);
 	if (!timer_base) {
-		pr_err("%s: unable to map resource\n", np->name);
+		pr_err("%pOFn: unable to map resource\n", np);
 		return -ENXIO;
 	}
 
 	clk = of_clk_get(np, 0);
 	if (IS_ERR(clk)) {
-		pr_err("%s: unable to get clk\n", np->name);
+		pr_err("%pOFn: unable to get clk\n", np);
 		return PTR_ERR(clk);
 	}
 
@@ -148,7 +148,7 @@ static int __init orion_timer_init(struct device_node *np)
 	/* we are only interested in timer1 irq */
 	irq = irq_of_parse_and_map(np, 1);
 	if (irq <= 0) {
-		pr_err("%s: unable to parse timer1 irq\n", np->name);
+		pr_err("%pOFn: unable to parse timer1 irq\n", np);
 		return -EINVAL;
 	}
 
@@ -174,7 +174,7 @@ static int __init orion_timer_init(struct device_node *np)
 	/* setup timer1 as clockevent timer */
 	ret = setup_irq(irq, &orion_clkevt_irq);
 	if (ret) {
-		pr_err("%s: unable to setup irq\n", np->name);
+		pr_err("%pOFn: unable to setup irq\n", np);
 		return ret;
 	}
 
diff --git a/drivers/clocksource/owl-timer.c b/drivers/clocksource/timer-owl.c
index ea00a5e8f95d..ea00a5e8f95d 100644
--- a/drivers/clocksource/owl-timer.c
+++ b/drivers/clocksource/timer-owl.c
diff --git a/drivers/clocksource/time-pistachio.c b/drivers/clocksource/timer-pistachio.c
index a2dd85d0c1d7..a2dd85d0c1d7 100644
--- a/drivers/clocksource/time-pistachio.c
+++ b/drivers/clocksource/timer-pistachio.c
diff --git a/drivers/clocksource/qcom-timer.c b/drivers/clocksource/timer-qcom.c
index 89816f89ff3f..89816f89ff3f 100644
--- a/drivers/clocksource/qcom-timer.c
+++ b/drivers/clocksource/timer-qcom.c
diff --git a/drivers/clocksource/timer-sp804.c b/drivers/clocksource/timer-sp804.c
index e01222ea888f..052b230ca312 100644
--- a/drivers/clocksource/timer-sp804.c
+++ b/drivers/clocksource/timer-sp804.c
@@ -249,7 +249,7 @@ static int __init sp804_of_init(struct device_node *np)
 	if (of_clk_get_parent_count(np) == 3) {
 		clk2 = of_clk_get(np, 1);
 		if (IS_ERR(clk2)) {
-			pr_err("sp804: %s clock not found: %d\n", np->name,
+			pr_err("sp804: %pOFn clock not found: %d\n", np,
 				(int)PTR_ERR(clk2));
 			clk2 = NULL;
 		}
diff --git a/drivers/clocksource/versatile.c b/drivers/clocksource/timer-versatile.c
index 39725d38aede..39725d38aede 100644
--- a/drivers/clocksource/versatile.c
+++ b/drivers/clocksource/timer-versatile.c
diff --git a/drivers/clocksource/vf_pit_timer.c b/drivers/clocksource/timer-vf-pit.c
index 0f92089ec08c..0f92089ec08c 100644
--- a/drivers/clocksource/vf_pit_timer.c
+++ b/drivers/clocksource/timer-vf-pit.c
diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/timer-vt8500.c
index e0f7489cfc8e..e0f7489cfc8e 100644
--- a/drivers/clocksource/vt8500_timer.c
+++ b/drivers/clocksource/timer-vt8500.c
diff --git a/drivers/clocksource/zevio-timer.c b/drivers/clocksource/timer-zevio.c
index f74689334f7c..6127e8062a71 100644
--- a/drivers/clocksource/zevio-timer.c
+++ b/drivers/clocksource/timer-zevio.c
@@ -148,12 +148,12 @@ static int __init zevio_timer_add(struct device_node *node)
 
 	of_address_to_resource(node, 0, &res);
 	scnprintf(timer->clocksource_name, sizeof(timer->clocksource_name),
-			"%llx.%s_clocksource",
-			(unsigned long long)res.start, node->name);
+			"%llx.%pOFn_clocksource",
+			(unsigned long long)res.start, node);
 
 	scnprintf(timer->clockevent_name, sizeof(timer->clockevent_name),
-			"%llx.%s_clockevent",
-			(unsigned long long)res.start, node->name);
+			"%llx.%pOFn_clockevent",
+			(unsigned long long)res.start, node);
 
 	if (timer->interrupt_regs && irqnr) {
 		timer->clkevt.name		= timer->clockevent_name;