diff options
Diffstat (limited to 'drivers/acpi/executer')
| -rw-r--r-- | drivers/acpi/executer/exconfig.c | 8 | ||||
| -rw-r--r-- | drivers/acpi/executer/excreate.c | 27 | ||||
| -rw-r--r-- | drivers/acpi/executer/exdump.c | 8 | ||||
| -rw-r--r-- | drivers/acpi/executer/exfldio.c | 71 | ||||
| -rw-r--r-- | drivers/acpi/executer/exmutex.c | 12 | ||||
| -rw-r--r-- | drivers/acpi/executer/exsystem.c | 82 |
6 files changed, 152 insertions, 56 deletions
diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c index 823352435e08..83fed079a276 100644 --- a/drivers/acpi/executer/exconfig.c +++ b/drivers/acpi/executer/exconfig.c @@ -266,6 +266,10 @@ acpi_ex_load_table_op(struct acpi_walk_state *walk_state, } } + ACPI_INFO((AE_INFO, + "Dynamic OEM Table Load - [%4.4s] OemId [%6.6s] OemTableId [%8.8s]", + table->signature, table->oem_id, table->oem_table_id)); + *return_desc = ddb_handle; return_ACPI_STATUS(status); } @@ -446,6 +450,10 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc, return_ACPI_STATUS(status); } + ACPI_INFO((AE_INFO, + "Dynamic SSDT Load - OemId [%6.6s] OemTableId [%8.8s]", + table_ptr->oem_id, table_ptr->oem_table_id)); + cleanup: if (ACPI_FAILURE(status)) { ACPI_FREE(table_ptr); diff --git a/drivers/acpi/executer/excreate.c b/drivers/acpi/executer/excreate.c index 106dc7219df7..34eec82c1b1e 100644 --- a/drivers/acpi/executer/excreate.c +++ b/drivers/acpi/executer/excreate.c @@ -177,7 +177,7 @@ acpi_status acpi_ex_create_event(struct acpi_walk_state *walk_state) * that the event is created in an unsignalled state */ status = acpi_os_create_semaphore(ACPI_NO_UNIT_LIMIT, 0, - &obj_desc->event.semaphore); + &obj_desc->event.os_semaphore); if (ACPI_FAILURE(status)) { goto cleanup; } @@ -226,12 +226,9 @@ acpi_status acpi_ex_create_mutex(struct acpi_walk_state *walk_state) goto cleanup; } - /* - * Create the actual OS semaphore. - * One unit max to make it a mutex, with one initial unit to allow - * the mutex to be acquired. - */ - status = acpi_os_create_semaphore(1, 1, &obj_desc->mutex.semaphore); + /* Create the actual OS Mutex */ + + status = acpi_os_create_mutex(&obj_desc->mutex.os_mutex); if (ACPI_FAILURE(status)) { goto cleanup; } @@ -565,7 +562,7 @@ acpi_ex_create_method(u8 * aml_start, obj_desc->method.aml_length = aml_length; /* - * Disassemble the method flags. Split off the Arg Count + * Disassemble the method flags. Split off the Arg Count * for efficiency */ method_flags = (u8) operand[1]->integer.value; @@ -576,21 +573,19 @@ acpi_ex_create_method(u8 * aml_start, (u8) (method_flags & AML_METHOD_ARG_COUNT); /* - * Get the concurrency count. If required, a semaphore will be + * Get the sync_level. If method is serialized, a mutex will be * created for this method when it is parsed. */ if (acpi_gbl_all_methods_serialized) { - obj_desc->method.concurrency = 1; + obj_desc->method.sync_level = 0; obj_desc->method.method_flags |= AML_METHOD_SERIALIZED; } else if (method_flags & AML_METHOD_SERIALIZED) { /* - * ACPI 1.0: Concurrency = 1 - * ACPI 2.0: Concurrency = (sync_level (in method declaration) + 1) + * ACPI 1.0: sync_level = 0 + * ACPI 2.0: sync_level = sync_level in method declaration */ - obj_desc->method.concurrency = (u8) - (((method_flags & AML_METHOD_SYNCH_LEVEL) >> 4) + 1); - } else { - obj_desc->method.concurrency = ACPI_INFINITE_CONCURRENCY; + obj_desc->method.sync_level = (u8) + ((method_flags & AML_METHOD_SYNCH_LEVEL) >> 4); } /* Attach the new object to the method Node */ diff --git a/drivers/acpi/executer/exdump.c b/drivers/acpi/executer/exdump.c index 7b9718e976bf..2450943add33 100644 --- a/drivers/acpi/executer/exdump.c +++ b/drivers/acpi/executer/exdump.c @@ -118,14 +118,14 @@ static struct acpi_exdump_info acpi_ex_dump_device[4] = { static struct acpi_exdump_info acpi_ex_dump_event[2] = { {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_event), NULL}, - {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(event.semaphore), "Semaphore"} + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(event.os_semaphore), "OsSemaphore"} }; static struct acpi_exdump_info acpi_ex_dump_method[8] = { {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_method), NULL}, {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.param_count), "ParamCount"}, - {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.concurrency), "Concurrency"}, - {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(method.semaphore), "Semaphore"}, + {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.sync_level), "Sync Level"}, + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(method.mutex), "Mutex"}, {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.owner_id), "Owner Id"}, {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.thread_count), "Thread Count"}, {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(method.aml_length), "Aml Length"}, @@ -138,7 +138,7 @@ static struct acpi_exdump_info acpi_ex_dump_mutex[5] = { {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(mutex.owner_thread), "Owner Thread"}, {ACPI_EXD_UINT16, ACPI_EXD_OFFSET(mutex.acquisition_depth), "Acquire Depth"}, - {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(mutex.semaphore), "Semaphore"} + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(mutex.os_mutex), "OsMutex"} }; static struct acpi_exdump_info acpi_ex_dump_region[7] = { diff --git a/drivers/acpi/executer/exfldio.c b/drivers/acpi/executer/exfldio.c index 051053f7cccb..40f0bee6faa5 100644 --- a/drivers/acpi/executer/exfldio.c +++ b/drivers/acpi/executer/exfldio.c @@ -727,11 +727,23 @@ acpi_ex_extract_from_field(union acpi_operand_object *obj_desc, return_ACPI_STATUS(status); } - /* Merge with previous datum if necessary */ - - merged_datum |= raw_datum << - (obj_desc->common_field.access_bit_width - - obj_desc->common_field.start_field_bit_offset); + /* + * Merge with previous datum if necessary. + * + * Note: Before the shift, check if the shift value will be larger than + * the integer size. If so, there is no need to perform the operation. + * This avoids the differences in behavior between different compilers + * concerning shift values larger than the target data width. + */ + if ((obj_desc->common_field.access_bit_width - + obj_desc->common_field.start_field_bit_offset) < + ACPI_INTEGER_BIT_SIZE) { + merged_datum |= + raw_datum << (obj_desc->common_field. + access_bit_width - + obj_desc->common_field. + start_field_bit_offset); + } if (i == datum_count) { break; @@ -808,13 +820,23 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, return_ACPI_STATUS(AE_BUFFER_OVERFLOW); } - /* Compute the number of datums (access width data items) */ + /* + * Create the bitmasks used for bit insertion. + * Note: This if/else is used to bypass compiler differences with the + * shift operator + */ + if (obj_desc->common_field.access_bit_width == ACPI_INTEGER_BIT_SIZE) { + width_mask = ACPI_INTEGER_MAX; + } else { + width_mask = + ACPI_MASK_BITS_ABOVE(obj_desc->common_field. + access_bit_width); + } - width_mask = - ACPI_MASK_BITS_ABOVE(obj_desc->common_field.access_bit_width); - mask = - width_mask & ACPI_MASK_BITS_BELOW(obj_desc->common_field. - start_field_bit_offset); + mask = width_mask & + ACPI_MASK_BITS_BELOW(obj_desc->common_field.start_field_bit_offset); + + /* Compute the number of datums (access width data items) */ datum_count = ACPI_ROUND_UP_TO(obj_desc->common_field.bit_length, obj_desc->common_field.access_bit_width); @@ -848,12 +870,29 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, return_ACPI_STATUS(status); } - /* Start new output datum by merging with previous input datum */ - field_offset += obj_desc->common_field.access_byte_width; - merged_datum = raw_datum >> - (obj_desc->common_field.access_bit_width - - obj_desc->common_field.start_field_bit_offset); + + /* + * Start new output datum by merging with previous input datum + * if necessary. + * + * Note: Before the shift, check if the shift value will be larger than + * the integer size. If so, there is no need to perform the operation. + * This avoids the differences in behavior between different compilers + * concerning shift values larger than the target data width. + */ + if ((obj_desc->common_field.access_bit_width - + obj_desc->common_field.start_field_bit_offset) < + ACPI_INTEGER_BIT_SIZE) { + merged_datum = + raw_datum >> (obj_desc->common_field. + access_bit_width - + obj_desc->common_field. + start_field_bit_offset); + } else { + merged_datum = 0; + } + mask = width_mask; if (i == datum_count) { diff --git a/drivers/acpi/executer/exmutex.c b/drivers/acpi/executer/exmutex.c index 93098d68cadf..d8ac2877cf05 100644 --- a/drivers/acpi/executer/exmutex.c +++ b/drivers/acpi/executer/exmutex.c @@ -161,12 +161,13 @@ acpi_ex_acquire_mutex(union acpi_operand_object *time_desc, /* * Current Sync must be less than or equal to the sync level of the - * mutex. This mechanism provides some deadlock prevention + * mutex. This mechanism provides some deadlock prevention */ if (walk_state->thread->current_sync_level > obj_desc->mutex.sync_level) { ACPI_ERROR((AE_INFO, - "Cannot acquire Mutex [%4.4s], incorrect SyncLevel", - acpi_ut_get_node_name(obj_desc->mutex.node))); + "Cannot acquire Mutex [%4.4s], current SyncLevel is too large (%d)", + acpi_ut_get_node_name(obj_desc->mutex.node), + walk_state->thread->current_sync_level)); return_ACPI_STATUS(AE_AML_MUTEX_ORDER); } @@ -178,8 +179,7 @@ acpi_ex_acquire_mutex(union acpi_operand_object *time_desc, if ((obj_desc->mutex.owner_thread->thread_id == walk_state->thread->thread_id) || - (obj_desc->mutex.semaphore == - acpi_gbl_global_lock_semaphore)) { + (obj_desc->mutex.os_mutex == ACPI_GLOBAL_LOCK)) { /* * The mutex is already owned by this thread, * just increment the acquisition depth @@ -264,7 +264,7 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc, */ if ((obj_desc->mutex.owner_thread->thread_id != walk_state->thread->thread_id) - && (obj_desc->mutex.semaphore != acpi_gbl_global_lock_semaphore)) { + && (obj_desc->mutex.os_mutex != ACPI_GLOBAL_LOCK)) { ACPI_ERROR((AE_INFO, "Thread %X cannot release Mutex [%4.4s] acquired by thread %X", walk_state->thread->thread_id, diff --git a/drivers/acpi/executer/exsystem.c b/drivers/acpi/executer/exsystem.c index 52beee3674a0..6b5d1e6ce94b 100644 --- a/drivers/acpi/executer/exsystem.c +++ b/drivers/acpi/executer/exsystem.c @@ -63,14 +63,14 @@ ACPI_MODULE_NAME("exsystem") * interpreter is released. * ******************************************************************************/ -acpi_status acpi_ex_system_wait_semaphore(acpi_handle semaphore, u16 timeout) +acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout) { acpi_status status; acpi_status status2; ACPI_FUNCTION_TRACE(ex_system_wait_semaphore); - status = acpi_os_wait_semaphore(semaphore, 1, 0); + status = acpi_os_wait_semaphore(semaphore, 1, ACPI_DO_NOT_WAIT); if (ACPI_SUCCESS(status)) { return_ACPI_STATUS(status); } @@ -103,6 +103,59 @@ acpi_status acpi_ex_system_wait_semaphore(acpi_handle semaphore, u16 timeout) /******************************************************************************* * + * FUNCTION: acpi_ex_system_wait_mutex + * + * PARAMETERS: Mutex - Mutex to wait on + * Timeout - Max time to wait + * + * RETURN: Status + * + * DESCRIPTION: Implements a semaphore wait with a check to see if the + * semaphore is available immediately. If it is not, the + * interpreter is released. + * + ******************************************************************************/ + +acpi_status acpi_ex_system_wait_mutex(acpi_mutex mutex, u16 timeout) +{ + acpi_status status; + acpi_status status2; + + ACPI_FUNCTION_TRACE(ex_system_wait_mutex); + + status = acpi_os_acquire_mutex(mutex, ACPI_DO_NOT_WAIT); + if (ACPI_SUCCESS(status)) { + return_ACPI_STATUS(status); + } + + if (status == AE_TIME) { + + /* We must wait, so unlock the interpreter */ + + acpi_ex_exit_interpreter(); + + status = acpi_os_acquire_mutex(mutex, timeout); + + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "*** Thread awake after blocking, %s\n", + acpi_format_exception(status))); + + /* Reacquire the interpreter */ + + status2 = acpi_ex_enter_interpreter(); + if (ACPI_FAILURE(status2)) { + + /* Report fatal error, could not acquire interpreter */ + + return_ACPI_STATUS(status2); + } + } + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * * FUNCTION: acpi_ex_system_do_stall * * PARAMETERS: how_long - The amount of time to stall, @@ -176,7 +229,7 @@ acpi_status acpi_ex_system_do_suspend(acpi_integer how_long) * * FUNCTION: acpi_ex_system_acquire_mutex * - * PARAMETERS: time_desc - The 'time to delay' object descriptor + * PARAMETERS: time_desc - Maximum time to wait for the mutex * obj_desc - The object descriptor for this op * * RETURN: Status @@ -201,14 +254,14 @@ acpi_ex_system_acquire_mutex(union acpi_operand_object * time_desc, /* Support for the _GL_ Mutex object -- go get the global lock */ - if (obj_desc->mutex.semaphore == acpi_gbl_global_lock_semaphore) { + if (obj_desc->mutex.os_mutex == ACPI_GLOBAL_LOCK) { status = acpi_ev_acquire_global_lock((u16) time_desc->integer.value); return_ACPI_STATUS(status); } - status = acpi_ex_system_wait_semaphore(obj_desc->mutex.semaphore, - (u16) time_desc->integer.value); + status = acpi_ex_system_wait_mutex(obj_desc->mutex.os_mutex, + (u16) time_desc->integer.value); return_ACPI_STATUS(status); } @@ -239,13 +292,13 @@ acpi_status acpi_ex_system_release_mutex(union acpi_operand_object *obj_desc) /* Support for the _GL_ Mutex object -- release the global lock */ - if (obj_desc->mutex.semaphore == acpi_gbl_global_lock_semaphore) { + if (obj_desc->mutex.os_mutex == ACPI_GLOBAL_LOCK) { status = acpi_ev_release_global_lock(); return_ACPI_STATUS(status); } - status = acpi_os_signal_semaphore(obj_desc->mutex.semaphore, 1); - return_ACPI_STATUS(status); + acpi_os_release_mutex(obj_desc->mutex.os_mutex); + return_ACPI_STATUS(AE_OK); } /******************************************************************************* @@ -268,7 +321,8 @@ acpi_status acpi_ex_system_signal_event(union acpi_operand_object *obj_desc) ACPI_FUNCTION_TRACE(ex_system_signal_event); if (obj_desc) { - status = acpi_os_signal_semaphore(obj_desc->event.semaphore, 1); + status = + acpi_os_signal_semaphore(obj_desc->event.os_semaphore, 1); } return_ACPI_STATUS(status); @@ -299,7 +353,7 @@ acpi_ex_system_wait_event(union acpi_operand_object *time_desc, if (obj_desc) { status = - acpi_ex_system_wait_semaphore(obj_desc->event.semaphore, + acpi_ex_system_wait_semaphore(obj_desc->event.os_semaphore, (u16) time_desc->integer. value); } @@ -322,7 +376,7 @@ acpi_ex_system_wait_event(union acpi_operand_object *time_desc, acpi_status acpi_ex_system_reset_event(union acpi_operand_object *obj_desc) { acpi_status status = AE_OK; - void *temp_semaphore; + acpi_semaphore temp_semaphore; ACPI_FUNCTION_ENTRY(); @@ -333,8 +387,8 @@ acpi_status acpi_ex_system_reset_event(union acpi_operand_object *obj_desc) status = acpi_os_create_semaphore(ACPI_NO_UNIT_LIMIT, 0, &temp_semaphore); if (ACPI_SUCCESS(status)) { - (void)acpi_os_delete_semaphore(obj_desc->event.semaphore); - obj_desc->event.semaphore = temp_semaphore; + (void)acpi_os_delete_semaphore(obj_desc->event.os_semaphore); + obj_desc->event.os_semaphore = temp_semaphore; } return (status); |
