diff options
Diffstat (limited to 'drivers/acpi/acpica/dbxface.c')
| -rw-r--r-- | drivers/acpi/acpica/dbxface.c | 513 |
1 files changed, 513 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/dbxface.c b/drivers/acpi/acpica/dbxface.c new file mode 100644 index 000000000000..342298a6e10f --- /dev/null +++ b/drivers/acpi/acpica/dbxface.c @@ -0,0 +1,513 @@ +/******************************************************************************* + * + * Module Name: dbxface - AML Debugger external interfaces + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "amlcode.h" +#include "acdebug.h" + +#define _COMPONENT ACPI_CA_DEBUGGER +ACPI_MODULE_NAME("dbxface") + +/* Local prototypes */ +static acpi_status +acpi_db_start_command(struct acpi_walk_state *walk_state, + union acpi_parse_object *op); + +#ifdef ACPI_OBSOLETE_FUNCTIONS +void acpi_db_method_end(struct acpi_walk_state *walk_state); +#endif + +/******************************************************************************* + * + * FUNCTION: acpi_db_start_command + * + * PARAMETERS: walk_state - Current walk + * op - Current executing Op, from AML interpreter + * + * RETURN: Status + * + * DESCRIPTION: Enter debugger command loop + * + ******************************************************************************/ + +static acpi_status +acpi_db_start_command(struct acpi_walk_state *walk_state, + union acpi_parse_object *op) +{ + acpi_status status; + + /* TBD: [Investigate] are there namespace locking issues here? */ + + /* acpi_ut_release_mutex (ACPI_MTX_NAMESPACE); */ + + /* Go into the command loop and await next user command */ + + acpi_gbl_method_executing = TRUE; + status = AE_CTRL_TRUE; + while (status == AE_CTRL_TRUE) { + if (acpi_gbl_debugger_configuration == DEBUGGER_MULTI_THREADED) { + + /* Handshake with the front-end that gets user command lines */ + + acpi_os_release_mutex(acpi_gbl_db_command_complete); + + status = + acpi_os_acquire_mutex(acpi_gbl_db_command_ready, + ACPI_WAIT_FOREVER); + if (ACPI_FAILURE(status)) { + return (status); + } + } else { + /* Single threaded, we must get a command line ourselves */ + + /* Force output to console until a command is entered */ + + acpi_db_set_output_destination(ACPI_DB_CONSOLE_OUTPUT); + + /* Different prompt if method is executing */ + + if (!acpi_gbl_method_executing) { + acpi_os_printf("%1c ", + ACPI_DEBUGGER_COMMAND_PROMPT); + } else { + acpi_os_printf("%1c ", + ACPI_DEBUGGER_EXECUTE_PROMPT); + } + + /* Get the user input line */ + + status = acpi_os_get_line(acpi_gbl_db_line_buf, + ACPI_DB_LINE_BUFFER_SIZE, + NULL); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "While parsing command line")); + return (status); + } + } + + status = + acpi_db_command_dispatch(acpi_gbl_db_line_buf, walk_state, + op); + } + + /* acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE); */ + + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_single_step + * + * PARAMETERS: walk_state - Current walk + * op - Current executing op (from aml interpreter) + * opcode_class - Class of the current AML Opcode + * + * RETURN: Status + * + * DESCRIPTION: Called just before execution of an AML opcode. + * + ******************************************************************************/ + +acpi_status +acpi_db_single_step(struct acpi_walk_state * walk_state, + union acpi_parse_object * op, u32 opcode_class) +{ + union acpi_parse_object *next; + acpi_status status = AE_OK; + u32 original_debug_level; + union acpi_parse_object *display_op; + union acpi_parse_object *parent_op; + u32 aml_offset; + + ACPI_FUNCTION_ENTRY(); + +#ifndef ACPI_APPLICATION + if (acpi_gbl_db_thread_id != acpi_os_get_thread_id()) { + return (AE_OK); + } +#endif + + /* Check the abort flag */ + + if (acpi_gbl_abort_method) { + acpi_gbl_abort_method = FALSE; + return (AE_ABORT_METHOD); + } + + aml_offset = (u32)ACPI_PTR_DIFF(op->common.aml, + walk_state->parser_state.aml_start); + + /* Check for single-step breakpoint */ + + if (walk_state->method_breakpoint && + (walk_state->method_breakpoint <= aml_offset)) { + + /* Check if the breakpoint has been reached or passed */ + /* Hit the breakpoint, resume single step, reset breakpoint */ + + acpi_os_printf("***Break*** at AML offset %X\n", aml_offset); + acpi_gbl_cm_single_step = TRUE; + acpi_gbl_step_to_next_call = FALSE; + walk_state->method_breakpoint = 0; + } + + /* Check for user breakpoint (Must be on exact Aml offset) */ + + else if (walk_state->user_breakpoint && + (walk_state->user_breakpoint == aml_offset)) { + acpi_os_printf("***UserBreakpoint*** at AML offset %X\n", + aml_offset); + acpi_gbl_cm_single_step = TRUE; + acpi_gbl_step_to_next_call = FALSE; + walk_state->method_breakpoint = 0; + } + + /* + * Check if this is an opcode that we are interested in -- + * namely, opcodes that have arguments + */ + if (op->common.aml_opcode == AML_INT_NAMEDFIELD_OP) { + return (AE_OK); + } + + switch (opcode_class) { + case AML_CLASS_UNKNOWN: + case AML_CLASS_ARGUMENT: /* constants, literals, etc. do nothing */ + + return (AE_OK); + + default: + + /* All other opcodes -- continue */ + break; + } + + /* + * Under certain debug conditions, display this opcode and its operands + */ + if ((acpi_gbl_db_output_to_file) || + (acpi_gbl_cm_single_step) || (acpi_dbg_level & ACPI_LV_PARSE)) { + if ((acpi_gbl_db_output_to_file) || + (acpi_dbg_level & ACPI_LV_PARSE)) { + acpi_os_printf + ("\n[AmlDebug] Next AML Opcode to execute:\n"); + } + + /* + * Display this op (and only this op - zero out the NEXT field + * temporarily, and disable parser trace output for the duration of + * the display because we don't want the extraneous debug output) + */ + original_debug_level = acpi_dbg_level; + acpi_dbg_level &= ~(ACPI_LV_PARSE | ACPI_LV_FUNCTIONS); + next = op->common.next; + op->common.next = NULL; + + display_op = op; + parent_op = op->common.parent; + if (parent_op) { + if ((walk_state->control_state) && + (walk_state->control_state->common.state == + ACPI_CONTROL_PREDICATE_EXECUTING)) { + /* + * We are executing the predicate of an IF or WHILE statement + * Search upwards for the containing IF or WHILE so that the + * entire predicate can be displayed. + */ + while (parent_op) { + if ((parent_op->common.aml_opcode == + AML_IF_OP) + || (parent_op->common.aml_opcode == + AML_WHILE_OP)) { + display_op = parent_op; + break; + } + parent_op = parent_op->common.parent; + } + } else { + while (parent_op) { + if ((parent_op->common.aml_opcode == + AML_IF_OP) + || (parent_op->common.aml_opcode == + AML_ELSE_OP) + || (parent_op->common.aml_opcode == + AML_SCOPE_OP) + || (parent_op->common.aml_opcode == + AML_METHOD_OP) + || (parent_op->common.aml_opcode == + AML_WHILE_OP)) { + break; + } + display_op = parent_op; + parent_op = parent_op->common.parent; + } + } + } + + /* Now we can display it */ + +#ifdef ACPI_DISASSEMBLER + acpi_dm_disassemble(walk_state, display_op, ACPI_UINT32_MAX); +#endif + + if ((op->common.aml_opcode == AML_IF_OP) || + (op->common.aml_opcode == AML_WHILE_OP)) { + if (walk_state->control_state->common.value) { + acpi_os_printf + ("Predicate = [True], IF block was executed\n"); + } else { + acpi_os_printf + ("Predicate = [False], Skipping IF block\n"); + } + } else if (op->common.aml_opcode == AML_ELSE_OP) { + acpi_os_printf + ("Predicate = [False], ELSE block was executed\n"); + } + + /* Restore everything */ + + op->common.next = next; + acpi_os_printf("\n"); + if ((acpi_gbl_db_output_to_file) || + (acpi_dbg_level & ACPI_LV_PARSE)) { + acpi_os_printf("\n"); + } + acpi_dbg_level = original_debug_level; + } + + /* If we are not single stepping, just continue executing the method */ + + if (!acpi_gbl_cm_single_step) { + return (AE_OK); + } + + /* + * If we are executing a step-to-call command, + * Check if this is a method call. + */ + if (acpi_gbl_step_to_next_call) { + if (op->common.aml_opcode != AML_INT_METHODCALL_OP) { + + /* Not a method call, just keep executing */ + + return (AE_OK); + } + + /* Found a method call, stop executing */ + + acpi_gbl_step_to_next_call = FALSE; + } + + /* + * If the next opcode is a method call, we will "step over" it + * by default. + */ + if (op->common.aml_opcode == AML_INT_METHODCALL_OP) { + + /* Force no more single stepping while executing called method */ + + acpi_gbl_cm_single_step = FALSE; + + /* + * Set the breakpoint on/before the call, it will stop execution + * as soon as we return + */ + walk_state->method_breakpoint = 1; /* Must be non-zero! */ + } + + status = acpi_db_start_command(walk_state, op); + + /* User commands complete, continue execution of the interrupted method */ + + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_initialize_debugger + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Init and start debugger + * + ******************************************************************************/ + +acpi_status acpi_initialize_debugger(void) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_initialize_debugger); + + /* Init globals */ + + acpi_gbl_db_buffer = NULL; + acpi_gbl_db_filename = NULL; + acpi_gbl_db_output_to_file = FALSE; + + acpi_gbl_db_debug_level = ACPI_LV_VERBOSITY2; + acpi_gbl_db_console_debug_level = ACPI_NORMAL_DEFAULT | ACPI_LV_TABLES; + acpi_gbl_db_output_flags = ACPI_DB_CONSOLE_OUTPUT; + + acpi_gbl_db_opt_no_ini_methods = FALSE; + + acpi_gbl_db_buffer = acpi_os_allocate(ACPI_DEBUG_BUFFER_SIZE); + if (!acpi_gbl_db_buffer) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + memset(acpi_gbl_db_buffer, 0, ACPI_DEBUG_BUFFER_SIZE); + + /* Initial scope is the root */ + + acpi_gbl_db_scope_buf[0] = AML_ROOT_PREFIX; + acpi_gbl_db_scope_buf[1] = 0; + acpi_gbl_db_scope_node = acpi_gbl_root_node; + + /* Initialize user commands loop */ + + acpi_gbl_db_terminate_loop = FALSE; + + /* + * If configured for multi-thread support, the debug executor runs in + * a separate thread so that the front end can be in another address + * space, environment, or even another machine. + */ + if (acpi_gbl_debugger_configuration & DEBUGGER_MULTI_THREADED) { + + /* These were created with one unit, grab it */ + + status = acpi_os_acquire_mutex(acpi_gbl_db_command_complete, + ACPI_WAIT_FOREVER); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not get debugger mutex\n"); + return_ACPI_STATUS(status); + } + + status = acpi_os_acquire_mutex(acpi_gbl_db_command_ready, + ACPI_WAIT_FOREVER); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not get debugger mutex\n"); + return_ACPI_STATUS(status); + } + + /* Create the debug execution thread to execute commands */ + + acpi_gbl_db_threads_terminated = FALSE; + status = acpi_os_execute(OSL_DEBUGGER_MAIN_THREAD, + acpi_db_execute_thread, NULL); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "Could not start debugger thread")); + acpi_gbl_db_threads_terminated = TRUE; + return_ACPI_STATUS(status); + } + } else { + acpi_gbl_db_thread_id = acpi_os_get_thread_id(); + } + + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_initialize_debugger) + +/******************************************************************************* + * + * FUNCTION: acpi_terminate_debugger + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Stop debugger + * + ******************************************************************************/ +void acpi_terminate_debugger(void) +{ + + /* Terminate the AML Debugger */ + + acpi_gbl_db_terminate_loop = TRUE; + + if (acpi_gbl_debugger_configuration & DEBUGGER_MULTI_THREADED) { + acpi_os_release_mutex(acpi_gbl_db_command_ready); + + /* Wait the AML Debugger threads */ + + while (!acpi_gbl_db_threads_terminated) { + acpi_os_sleep(100); + } + } + + if (acpi_gbl_db_buffer) { + acpi_os_free(acpi_gbl_db_buffer); + acpi_gbl_db_buffer = NULL; + } + + /* Ensure that debug output is now disabled */ + + acpi_gbl_db_output_flags = ACPI_DB_DISABLE_OUTPUT; +} + +ACPI_EXPORT_SYMBOL(acpi_terminate_debugger) + +/******************************************************************************* + * + * FUNCTION: acpi_set_debugger_thread_id + * + * PARAMETERS: thread_id - Debugger thread ID + * + * RETURN: None + * + * DESCRIPTION: Set debugger thread ID + * + ******************************************************************************/ +void acpi_set_debugger_thread_id(acpi_thread_id thread_id) +{ + acpi_gbl_db_thread_id = thread_id; +} + +ACPI_EXPORT_SYMBOL(acpi_set_debugger_thread_id) |
