summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/alpha/include/asm/percpu.h6
-rw-r--r--arch/alpha/include/asm/thread_info.h1
-rw-r--r--arch/arm/Kconfig31
-rw-r--r--arch/arm/Kconfig.debug8
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/configs/bcmring_defconfig725
-rw-r--r--arch/arm/configs/cpu9260_defconfig1338
-rw-r--r--arch/arm/configs/cpu9g20_defconfig1328
-rw-r--r--arch/arm/configs/cpuat91_defconfig1316
-rw-r--r--arch/arm/configs/kb9202_defconfig1158
-rw-r--r--arch/arm/configs/s3c2410_defconfig2
-rw-r--r--arch/arm/configs/s3c6400_defconfig1
-rw-r--r--arch/arm/configs/tct_hammer_defconfig1
-rw-r--r--arch/arm/configs/u300_defconfig92
-rw-r--r--arch/arm/include/asm/ftrace.h34
-rw-r--r--arch/arm/include/asm/page.h2
-rw-r--r--arch/arm/include/asm/pgalloc.h16
-rw-r--r--arch/arm/include/asm/pgtable.h74
-rw-r--r--arch/arm/include/asm/thread_info.h4
-rw-r--r--arch/arm/include/asm/unistd.h7
-rw-r--r--arch/arm/kernel/Makefile4
-rw-r--r--arch/arm/kernel/calls.S10
-rw-r--r--arch/arm/kernel/crunch.c13
-rw-r--r--arch/arm/kernel/entry-common.S10
-rw-r--r--arch/arm/kernel/irq.c24
-rw-r--r--arch/arm/kernel/return_address.c71
-rw-r--r--arch/arm/kernel/signal.c86
-rw-r--r--arch/arm/kernel/stacktrace.c4
-rw-r--r--arch/arm/kernel/vmlinux.lds.S15
-rw-r--r--arch/arm/mach-at91/Kconfig70
-rw-r--r--arch/arm/mach-at91/Makefile9
-rw-r--r--arch/arm/mach-at91/Makefile.boot4
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c116
-rw-r--r--arch/arm/mach-at91/at91sam9261.c22
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c14
-rw-r--r--arch/arm/mach-at91/at91sam9g45.c360
-rw-r--r--arch/arm/mach-at91/at91sam9g45_devices.c1230
-rw-r--r--arch/arm/mach-at91/board-afeb-9260v1.c12
-rw-r--r--arch/arm/mach-at91/board-cpu9krea.c385
-rw-r--r--arch/arm/mach-at91/board-cpuat91.c185
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c14
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c4
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c55
-rw-r--r--arch/arm/mach-at91/board-sam9m10g45ek.c389
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c85
-rw-r--r--arch/arm/mach-at91/clock.c66
-rw-r--r--arch/arm/mach-at91/generic.h2
-rw-r--r--arch/arm/mach-at91/gpio.c15
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9261.h3
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9g45.h155
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h153
-rw-r--r--arch/arm/mach-at91/include/mach/board.h14
-rw-r--r--arch/arm/mach-at91/include/mach/cpu.h23
-rw-r--r--arch/arm/mach-at91/include/mach/hardware.h4
-rw-r--r--arch/arm/mach-at91/include/mach/timex.h10
-rw-r--r--arch/arm/mach-at91/pm.c3
-rw-r--r--arch/arm/mach-bcmring/Kconfig21
-rw-r--r--arch/arm/mach-bcmring/Makefile8
-rw-r--r--arch/arm/mach-bcmring/Makefile.boot6
-rw-r--r--arch/arm/mach-bcmring/arch.c157
-rw-r--r--arch/arm/mach-bcmring/clock.c224
-rw-r--r--arch/arm/mach-bcmring/clock.h33
-rw-r--r--arch/arm/mach-bcmring/core.c367
-rw-r--r--arch/arm/mach-bcmring/core.h30
-rw-r--r--arch/arm/mach-bcmring/csp/Makefile3
-rw-r--r--arch/arm/mach-bcmring/csp/chipc/Makefile1
-rw-r--r--arch/arm/mach-bcmring/csp/chipc/chipcHw.c776
-rw-r--r--arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c293
-rw-r--r--arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c124
-rw-r--r--arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c64
-rw-r--r--arch/arm/mach-bcmring/csp/dmac/Makefile1
-rw-r--r--arch/arm/mach-bcmring/csp/dmac/dmacHw.c917
-rw-r--r--arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c1017
-rw-r--r--arch/arm/mach-bcmring/csp/tmr/Makefile1
-rw-r--r--arch/arm/mach-bcmring/csp/tmr/tmrHw.c576
-rw-r--r--arch/arm/mach-bcmring/dma.c2321
-rw-r--r--arch/arm/mach-bcmring/dma_device.c593
-rw-r--r--arch/arm/mach-bcmring/include/cfg_global.h13
-rw-r--r--arch/arm/mach-bcmring/include/cfg_global_defines.h40
-rw-r--r--arch/arm/mach-bcmring/include/csp/cache.h35
-rw-r--r--arch/arm/mach-bcmring/include/csp/delay.h36
-rw-r--r--arch/arm/mach-bcmring/include/csp/dmacHw.h596
-rw-r--r--arch/arm/mach-bcmring/include/csp/errno.h32
-rw-r--r--arch/arm/mach-bcmring/include/csp/intcHw.h40
-rw-r--r--arch/arm/mach-bcmring/include/csp/module.h32
-rw-r--r--arch/arm/mach-bcmring/include/csp/reg.h114
-rw-r--r--arch/arm/mach-bcmring/include/csp/secHw.h65
-rw-r--r--arch/arm/mach-bcmring/include/csp/stdint.h30
-rw-r--r--arch/arm/mach-bcmring/include/csp/string.h34
-rw-r--r--arch/arm/mach-bcmring/include/csp/tmrHw.h263
-rw-r--r--arch/arm/mach-bcmring/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/cap.h63
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/cap_inline.h409
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h1123
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h1673
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h530
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h872
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h145
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h406
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h73
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h246
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/mm_addr.h101
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/mm_io.h147
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/secHw_def.h100
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h79
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h82
-rw-r--r--arch/arm/mach-bcmring/include/mach/dma.h826
-rw-r--r--arch/arm/mach-bcmring/include/mach/entry-macro.S86
-rw-r--r--arch/arm/mach-bcmring/include/mach/hardware.h60
-rw-r--r--arch/arm/mach-bcmring/include/mach/io.h56
-rw-r--r--arch/arm/mach-bcmring/include/mach/irqs.h132
-rw-r--r--arch/arm/mach-bcmring/include/mach/memory.h33
-rw-r--r--arch/arm/mach-bcmring/include/mach/memory_settings.h67
-rw-r--r--arch/arm/mach-bcmring/include/mach/system.h54
-rw-r--r--arch/arm/mach-bcmring/include/mach/timer.h77
-rw-r--r--arch/arm/mach-bcmring/include/mach/timex.h25
-rw-r--r--arch/arm/mach-bcmring/include/mach/uncompress.h43
-rw-r--r--arch/arm/mach-bcmring/include/mach/vmalloc.h25
-rw-r--r--arch/arm/mach-bcmring/irq.c127
-rw-r--r--arch/arm/mach-bcmring/mm.c56
-rw-r--r--arch/arm/mach-bcmring/timer.c62
-rw-r--r--arch/arm/mach-ep93xx/adssphere.c11
-rw-r--r--arch/arm/mach-ep93xx/clock.c131
-rw-r--r--arch/arm/mach-ep93xx/core.c202
-rw-r--r--arch/arm/mach-ep93xx/edb93xx.c10
-rw-r--r--arch/arm/mach-ep93xx/gesbc9312.c11
-rw-r--r--arch/arm/mach-ep93xx/gpio.c65
-rw-r--r--arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h103
-rw-r--r--arch/arm/mach-ep93xx/include/mach/hardware.h17
-rw-r--r--arch/arm/mach-ep93xx/include/mach/io.h17
-rw-r--r--arch/arm/mach-ep93xx/include/mach/platform.h20
-rw-r--r--arch/arm/mach-ep93xx/include/mach/system.h12
-rw-r--r--arch/arm/mach-ep93xx/include/mach/ts72xx.h1
-rw-r--r--arch/arm/mach-ep93xx/micro9.c11
-rw-r--r--arch/arm/mach-ep93xx/ts72xx.c15
-rw-r--r--arch/arm/mach-mx3/devices.c1
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c3
-rw-r--r--arch/arm/mach-omap1/mailbox.c2
-rw-r--r--arch/arm/mach-omap1/mcbsp.c1
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c1
-rw-r--r--arch/arm/mach-omap2/gpmc-onenand.c21
-rw-r--r--arch/arm/mach-omap2/id.c22
-rw-r--r--arch/arm/mach-omap2/mailbox.c6
-rw-r--r--arch/arm/mach-omap2/mcbsp.c1
-rw-r--r--arch/arm/mach-omap2/mmc-twl4030.c13
-rw-r--r--arch/arm/mach-s3c2440/mach-mini2440.c3
-rw-r--r--arch/arm/mach-s3c2442/mach-gta02.c3
-rw-r--r--arch/arm/mach-u300/clock.c121
-rw-r--r--arch/arm/mach-w90x900/Kconfig30
-rw-r--r--arch/arm/mach-w90x900/Makefile12
-rw-r--r--arch/arm/mach-w90x900/clksel.c91
-rw-r--r--arch/arm/mach-w90x900/clock.c26
-rw-r--r--arch/arm/mach-w90x900/clock.h12
-rw-r--r--arch/arm/mach-w90x900/cpu.c212
-rw-r--r--arch/arm/mach-w90x900/cpu.h49
-rw-r--r--arch/arm/mach-w90x900/dev.c389
-rw-r--r--arch/arm/mach-w90x900/gpio.c78
-rw-r--r--arch/arm/mach-w90x900/include/mach/regs-clock.h22
-rw-r--r--arch/arm/mach-w90x900/include/mach/regs-ebi.h33
-rw-r--r--arch/arm/mach-w90x900/irq.c172
-rw-r--r--arch/arm/mach-w90x900/mach-nuc910evb.c44
-rw-r--r--arch/arm/mach-w90x900/mach-nuc950evb.c44
-rw-r--r--arch/arm/mach-w90x900/mach-nuc960evb.c44
-rw-r--r--arch/arm/mach-w90x900/mach-w90p910evb.c267
-rw-r--r--arch/arm/mach-w90x900/mfp-w90p910.c116
-rw-r--r--arch/arm/mach-w90x900/mfp.c158
-rw-r--r--arch/arm/mach-w90x900/nuc910.c60
-rw-r--r--arch/arm/mach-w90x900/nuc910.h28
-rw-r--r--arch/arm/mach-w90x900/nuc950.c54
-rw-r--r--arch/arm/mach-w90x900/nuc950.h28
-rw-r--r--arch/arm/mach-w90x900/nuc960.c54
-rw-r--r--arch/arm/mach-w90x900/nuc960.h28
-rw-r--r--arch/arm/mach-w90x900/time.c153
-rw-r--r--arch/arm/mach-w90x900/w90p910.c136
-rw-r--r--arch/arm/mm/fault.c1
-rw-r--r--arch/arm/mm/proc-macros.S6
-rw-r--r--arch/arm/mm/proc-syms.c1
-rw-r--r--arch/arm/plat-omap/dma.c13
-rw-r--r--arch/arm/plat-omap/gpio.c1
-rw-r--r--arch/arm/plat-omap/include/mach/cpu.h22
-rw-r--r--arch/arm/plat-omap/include/mach/dma.h15
-rw-r--r--arch/arm/plat-omap/include/mach/io.h2
-rw-r--r--arch/arm/plat-omap/iommu.c2
-rw-r--r--arch/arm/plat-omap/sram.c7
-rw-r--r--arch/arm/plat-s3c/Makefile2
-rw-r--r--arch/arm/plat-s3c/include/plat/devs.h1
-rw-r--r--arch/arm/plat-s3c24xx/Makefile2
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c3
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c3
-rw-r--r--arch/arm/plat-stmp3xxx/pinmux.c1
-rw-r--r--arch/arm/tools/mach-types139
-rw-r--r--arch/avr32/include/asm/thread_info.h2
-rw-r--r--arch/avr32/kernel/traps.c13
-rw-r--r--arch/blackfin/include/asm/thread_info.h2
-rw-r--r--arch/blackfin/kernel/setup.c41
-rw-r--r--arch/blackfin/kernel/traps.c34
-rw-r--r--arch/cris/include/asm/thread_info.h4
-rw-r--r--arch/frv/Kconfig1
-rw-r--r--arch/frv/include/asm/atomic.h68
-rw-r--r--arch/frv/include/asm/perf_counter.h17
-rw-r--r--arch/frv/include/asm/system.h2
-rw-r--r--arch/frv/include/asm/thread_info.h4
-rw-r--r--arch/frv/include/asm/unistd.h4
-rw-r--r--arch/frv/kernel/entry.S2
-rw-r--r--arch/frv/kernel/frv_ksyms.c4
-rw-r--r--arch/frv/lib/Makefile4
-rw-r--r--arch/frv/lib/atomic-ops.S3
-rw-r--r--arch/frv/lib/atomic64-ops.S162
-rw-r--r--arch/frv/lib/perf_counter.c19
-rw-r--r--arch/h8300/include/asm/thread_info.h2
-rw-r--r--arch/ia64/include/asm/thread_info.h2
-rw-r--r--arch/ia64/kernel/esi.c2
-rw-r--r--arch/ia64/kernel/perfmon.c2
-rw-r--r--arch/ia64/kernel/salinfo.c2
-rw-r--r--arch/ia64/kvm/kvm_lib.c6
-rw-r--r--arch/ia64/kvm/process.c6
-rw-r--r--arch/ia64/kvm/vcpu.c2
-rw-r--r--arch/ia64/kvm/vtlb.c4
-rw-r--r--arch/ia64/pci/pci.c2
-rw-r--r--arch/ia64/sn/kernel/io_common.c3
-rw-r--r--arch/m32r/include/asm/thread_info.h4
-rw-r--r--arch/m68k/include/asm/thread_info_mm.h1
-rw-r--r--arch/m68k/include/asm/thread_info_no.h1
-rw-r--r--arch/m68knommu/kernel/process.c21
-rw-r--r--arch/m68knommu/kernel/traps.c6
-rw-r--r--arch/microblaze/Kconfig3
-rw-r--r--arch/microblaze/include/asm/atomic.h101
-rw-r--r--arch/microblaze/include/asm/bitops.h26
-rw-r--r--arch/microblaze/include/asm/bug.h14
-rw-r--r--arch/microblaze/include/asm/bugs.h18
-rw-r--r--arch/microblaze/include/asm/checksum.h70
-rw-r--r--arch/microblaze/include/asm/fb.h1
-rw-r--r--arch/microblaze/include/asm/hardirq.h14
-rw-r--r--arch/microblaze/include/asm/ioctls.h92
-rw-r--r--arch/microblaze/include/asm/ipcbuf.h37
-rw-r--r--arch/microblaze/include/asm/irq.h6
-rw-r--r--arch/microblaze/include/asm/mman.h24
-rw-r--r--arch/microblaze/include/asm/mmu.h7
-rw-r--r--arch/microblaze/include/asm/mmu_context.h2
-rw-r--r--arch/microblaze/include/asm/mmu_context_no.h23
-rw-r--r--arch/microblaze/include/asm/module.h10
-rw-r--r--arch/microblaze/include/asm/msgbuf.h32
-rw-r--r--arch/microblaze/include/asm/param.h31
-rw-r--r--arch/microblaze/include/asm/parport.h1
-rw-r--r--arch/microblaze/include/asm/pci.h2
-rw-r--r--arch/microblaze/include/asm/posix_types.h68
-rw-r--r--arch/microblaze/include/asm/scatterlist.h29
-rw-r--r--arch/microblaze/include/asm/sembuf.h35
-rw-r--r--arch/microblaze/include/asm/serial.h15
-rw-r--r--arch/microblaze/include/asm/shmbuf.h43
-rw-r--r--arch/microblaze/include/asm/shmparam.h7
-rw-r--r--arch/microblaze/include/asm/siginfo.h14
-rw-r--r--arch/microblaze/include/asm/signal.h166
-rw-r--r--arch/microblaze/include/asm/socket.h70
-rw-r--r--arch/microblaze/include/asm/sockios.h24
-rw-r--r--arch/microblaze/include/asm/stat.h69
-rw-r--r--arch/microblaze/include/asm/swab.h9
-rw-r--r--arch/microblaze/include/asm/syscalls.h46
-rw-r--r--arch/microblaze/include/asm/system.h3
-rw-r--r--arch/microblaze/include/asm/termbits.h204
-rw-r--r--arch/microblaze/include/asm/termios.h89
-rw-r--r--arch/microblaze/include/asm/thread_info.h4
-rw-r--r--arch/microblaze/include/asm/timex.h6
-rw-r--r--arch/microblaze/include/asm/types.h39
-rw-r--r--arch/microblaze/include/asm/ucontext.h23
-rw-r--r--arch/microblaze/include/asm/unistd.h6
-rw-r--r--arch/microblaze/include/asm/vga.h2
-rw-r--r--arch/microblaze/kernel/entry-nommu.S20
-rw-r--r--arch/microblaze/kernel/entry.S34
-rw-r--r--arch/microblaze/kernel/signal.c174
-rw-r--r--arch/microblaze/kernel/sys_microblaze.c20
-rw-r--r--arch/microblaze/kernel/syscall_table.S14
-rw-r--r--arch/microblaze/lib/Makefile2
-rw-r--r--arch/microblaze/lib/checksum.c172
-rw-r--r--arch/microblaze/mm/init.c6
-rw-r--r--arch/mips/Kconfig29
-rw-r--r--arch/mips/Makefile7
-rw-r--r--arch/mips/ar7/Makefile10
-rw-r--r--arch/mips/ar7/clock.c440
-rw-r--r--arch/mips/ar7/gpio.c48
-rw-r--r--arch/mips/ar7/irq.c176
-rw-r--r--arch/mips/ar7/memory.c72
-rw-r--r--arch/mips/ar7/platform.c555
-rw-r--r--arch/mips/ar7/prom.c297
-rw-r--r--arch/mips/ar7/setup.c94
-rw-r--r--arch/mips/ar7/time.c30
-rw-r--r--arch/mips/cavium-octeon/Makefile4
-rw-r--r--arch/mips/cavium-octeon/dma-octeon.c2
-rw-r--r--arch/mips/cavium-octeon/pci-common.c137
-rw-r--r--arch/mips/cobalt/buttons.c2
-rw-r--r--arch/mips/cobalt/lcd.c2
-rw-r--r--arch/mips/cobalt/led.c2
-rw-r--r--arch/mips/cobalt/mtd.c2
-rw-r--r--arch/mips/cobalt/rtc.c2
-rw-r--r--arch/mips/cobalt/serial.c2
-rw-r--r--arch/mips/cobalt/time.c2
-rw-r--r--arch/mips/configs/ar7_defconfig1182
-rw-r--r--arch/mips/gt64120/wrppmc/serial.c2
-rw-r--r--arch/mips/include/asm/amon.h7
-rw-r--r--arch/mips/include/asm/ds1287.h2
-rw-r--r--arch/mips/include/asm/elf.h4
-rw-r--r--arch/mips/include/asm/gcmpregs.h2
-rw-r--r--arch/mips/include/asm/gic.h6
-rw-r--r--arch/mips/include/asm/irq_gt641xx.h2
-rw-r--r--arch/mips/include/asm/mach-ar7/ar7.h178
-rw-r--r--arch/mips/include/asm/mach-ar7/gpio.h110
-rw-r--r--arch/mips/include/asm/mach-ar7/irq.h16
-rw-r--r--arch/mips/include/asm/mach-ar7/prom.h25
-rw-r--r--arch/mips/include/asm/mach-ar7/spaces.h22
-rw-r--r--arch/mips/include/asm/mach-ar7/war.h25
-rw-r--r--arch/mips/include/asm/mach-cobalt/irq.h2
-rw-r--r--arch/mips/include/asm/mach-cobalt/mach-gt64120.h2
-rw-r--r--arch/mips/include/asm/octeon/pci-octeon.h (renamed from arch/mips/cavium-octeon/pci-common.h)30
-rw-r--r--arch/mips/include/asm/page.h9
-rw-r--r--arch/mips/include/asm/reg.h2
-rw-r--r--arch/mips/include/asm/swab.h8
-rw-r--r--arch/mips/include/asm/thread_info.h4
-rw-r--r--arch/mips/include/asm/unistd.h18
-rw-r--r--arch/mips/include/asm/vr41xx/capcella.h2
-rw-r--r--arch/mips/include/asm/vr41xx/giu.h22
-rw-r--r--arch/mips/include/asm/vr41xx/irq.h2
-rw-r--r--arch/mips/include/asm/vr41xx/mpc30x.h2
-rw-r--r--arch/mips/include/asm/vr41xx/pci.h2
-rw-r--r--arch/mips/include/asm/vr41xx/siu.h2
-rw-r--r--arch/mips/include/asm/vr41xx/tb0219.h2
-rw-r--r--arch/mips/include/asm/vr41xx/tb0226.h2
-rw-r--r--arch/mips/include/asm/vr41xx/vr41xx.h2
-rw-r--r--arch/mips/kernel/binfmt_elfo32.c20
-rw-r--r--arch/mips/kernel/cevt-ds1287.c2
-rw-r--r--arch/mips/kernel/cevt-gt641xx.c2
-rw-r--r--arch/mips/kernel/csrc-ioasic.c2
-rw-r--r--arch/mips/kernel/irq-gic.c19
-rw-r--r--arch/mips/kernel/irq-gt641xx.c2
-rw-r--r--arch/mips/kernel/scall32-o32.S2
-rw-r--r--arch/mips/kernel/scall64-64.S2
-rw-r--r--arch/mips/kernel/scall64-n32.S2
-rw-r--r--arch/mips/kernel/scall64-o32.S2
-rw-r--r--arch/mips/kernel/smp-cmp.c66
-rw-r--r--arch/mips/kernel/sync-r4k.c31
-rw-r--r--arch/mips/kernel/vpe.c2
-rw-r--r--arch/mips/mti-malta/malta-init.c14
-rw-r--r--arch/mips/mti-malta/malta-int.c89
-rw-r--r--arch/mips/mti-malta/malta-reset.c3
-rw-r--r--arch/mips/pci/Makefile5
-rw-r--r--arch/mips/pci/fixup-capcella.c2
-rw-r--r--arch/mips/pci/fixup-mpc30x.c2
-rw-r--r--arch/mips/pci/fixup-tb0219.c2
-rw-r--r--arch/mips/pci/fixup-tb0226.c2
-rw-r--r--arch/mips/pci/fixup-tb0287.c2
-rw-r--r--arch/mips/pci/msi-octeon.c (renamed from arch/mips/cavium-octeon/msi.c)56
-rw-r--r--arch/mips/pci/ops-vr41xx.c6
-rw-r--r--arch/mips/pci/pci-octeon.c (renamed from arch/mips/cavium-octeon/pci.c)147
-rw-r--r--arch/mips/pci/pci-vr41xx.c6
-rw-r--r--arch/mips/pci/pci-vr41xx.h4
-rw-r--r--arch/mips/pci/pcie-octeon.c (renamed from arch/mips/cavium-octeon/pcie.c)37
-rw-r--r--arch/mips/vr41xx/casio-e55/setup.c2
-rw-r--r--arch/mips/vr41xx/common/bcu.c8
-rw-r--r--arch/mips/vr41xx/common/cmu.c8
-rw-r--r--arch/mips/vr41xx/common/giu.c2
-rw-r--r--arch/mips/vr41xx/common/icu.c8
-rw-r--r--arch/mips/vr41xx/common/init.c2
-rw-r--r--arch/mips/vr41xx/common/irq.c2
-rw-r--r--arch/mips/vr41xx/common/pmu.c2
-rw-r--r--arch/mips/vr41xx/common/rtc.c2
-rw-r--r--arch/mips/vr41xx/common/siu.c2
-rw-r--r--arch/mips/vr41xx/common/type.c2
-rw-r--r--arch/mips/vr41xx/ibm-workpad/setup.c2
-rw-r--r--arch/mn10300/include/asm/pci.h4
-rw-r--r--arch/mn10300/include/asm/thread_info.h4
-rw-r--r--arch/mn10300/include/asm/unistd.h4
-rw-r--r--arch/mn10300/kernel/entry.S2
-rw-r--r--arch/mn10300/kernel/traps.c21
-rw-r--r--arch/mn10300/kernel/vmlinux.lds.S2
-rw-r--r--arch/parisc/Kconfig2
-rw-r--r--arch/parisc/include/asm/atomic.h14
-rw-r--r--arch/parisc/include/asm/dma.h3
-rw-r--r--arch/parisc/include/asm/perf_counter.h7
-rw-r--r--arch/parisc/include/asm/processor.h3
-rw-r--r--arch/parisc/include/asm/system.h4
-rw-r--r--arch/parisc/include/asm/thread_info.h2
-rw-r--r--arch/parisc/include/asm/tlbflush.h14
-rw-r--r--arch/parisc/include/asm/unistd.h6
-rw-r--r--arch/parisc/kernel/cache.c26
-rw-r--r--arch/parisc/kernel/inventory.c41
-rw-r--r--arch/parisc/kernel/irq.c10
-rw-r--r--arch/parisc/kernel/pci-dma.c12
-rw-r--r--arch/parisc/kernel/pci.c3
-rw-r--r--arch/parisc/kernel/process.c2
-rw-r--r--arch/parisc/kernel/processor.c19
-rw-r--r--arch/parisc/kernel/setup.c3
-rw-r--r--arch/parisc/kernel/sys_parisc32.c62
-rw-r--r--arch/parisc/kernel/syscall_table.S4
-rw-r--r--arch/parisc/kernel/time.c90
-rw-r--r--arch/parisc/kernel/traps.c20
-rw-r--r--arch/parisc/lib/checksum.c2
-rw-r--r--arch/parisc/lib/memcpy.c2
-rw-r--r--arch/parisc/math-emu/decode_exc.c2
-rw-r--r--arch/parisc/mm/fault.c3
-rw-r--r--arch/parisc/mm/init.c29
-rw-r--r--arch/powerpc/Kconfig1
-rw-r--r--arch/powerpc/boot/.gitignore10
-rw-r--r--arch/powerpc/boot/dts/amigaone.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8569mds.dts1
-rw-r--r--arch/powerpc/boot/dts/warp.dts3
-rw-r--r--arch/powerpc/configs/44x/warp_defconfig200
-rw-r--r--arch/powerpc/include/asm/cpm1.h2
-rw-r--r--arch/powerpc/include/asm/delay.h2
-rw-r--r--arch/powerpc/include/asm/dma-mapping.h24
-rw-r--r--arch/powerpc/include/asm/highmem.h57
-rw-r--r--arch/powerpc/include/asm/hw_irq.h20
-rw-r--r--arch/powerpc/include/asm/perf_counter.h2
-rw-r--r--arch/powerpc/include/asm/pte-hash64-64k.h3
-rw-r--r--arch/powerpc/include/asm/rtas.h5
-rw-r--r--arch/powerpc/include/asm/thread_info.h4
-rw-r--r--arch/powerpc/kernel/entry_32.S127
-rw-r--r--arch/powerpc/kernel/head_32.S17
-rw-r--r--arch/powerpc/kernel/mpc7450-pmu.c1
-rw-r--r--arch/powerpc/kernel/of_device.c2
-rw-r--r--arch/powerpc/kernel/power7-pmu.c1
-rw-r--r--arch/powerpc/kernel/ppc970-pmu.c1
-rw-r--r--arch/powerpc/kernel/process.c2
-rw-r--r--arch/powerpc/kernel/rtas.c69
-rw-r--r--arch/powerpc/kernel/setup_32.c2
-rw-r--r--arch/powerpc/kernel/smp.c3
-rw-r--r--arch/powerpc/kernel/udbg_16550.c2
-rw-r--r--arch/powerpc/mm/Makefile1
-rw-r--r--arch/powerpc/mm/gup.c10
-rw-r--r--arch/powerpc/mm/highmem.c77
-rw-r--r--arch/powerpc/mm/mmu_context_nohash.c16
-rw-r--r--arch/powerpc/mm/pgtable.c4
-rw-r--r--arch/powerpc/mm/slb.c13
-rw-r--r--arch/powerpc/mm/tlb_hash64.c2
-rw-r--r--arch/powerpc/oprofile/cell/vma_map.c2
-rw-r--r--arch/powerpc/platforms/44x/warp.c63
-rw-r--r--arch/powerpc/platforms/82xx/pq2ads-pci-pic.c2
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_mds.c1
-rw-r--r--arch/powerpc/platforms/85xx/smp.c9
-rw-r--r--arch/powerpc/platforms/85xx/socrates.c6
-rw-r--r--arch/powerpc/platforms/85xx/xes_mpc85xx.c1
-rw-r--r--arch/powerpc/platforms/cell/axon_msi.c22
-rw-r--r--arch/powerpc/platforms/cell/smp.c30
-rw-r--r--arch/powerpc/platforms/chrp/smp.c33
-rw-r--r--arch/powerpc/platforms/pasemi/setup.c15
-rw-r--r--arch/powerpc/platforms/powermac/cpufreq_64.c2
-rw-r--r--arch/powerpc/platforms/powermac/pic.c2
-rw-r--r--arch/powerpc/platforms/powermac/setup.c41
-rw-r--r--arch/powerpc/platforms/powermac/smp.c166
-rw-r--r--arch/powerpc/platforms/ps3/system-bus.c1
-rw-r--r--arch/powerpc/platforms/pseries/lpar.c18
-rw-r--r--arch/powerpc/platforms/pseries/smp.c30
-rw-r--r--arch/powerpc/platforms/pseries/xics.c8
-rw-r--r--arch/powerpc/sysdev/fsl_rio.c2
-rw-r--r--arch/powerpc/sysdev/ipic.c4
-rw-r--r--arch/powerpc/sysdev/mpic.c43
-rw-r--r--arch/powerpc/sysdev/ppc4xx_pci.c4
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe.c9
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe_ic.c4
-rw-r--r--arch/powerpc/sysdev/uic.c3
-rw-r--r--arch/s390/Kconfig8
-rw-r--r--arch/s390/include/asm/atomic.h7
-rw-r--r--arch/s390/include/asm/kvm_host.h4
-rw-r--r--arch/s390/include/asm/perf_counter.h2
-rw-r--r--arch/s390/include/asm/thread_info.h2
-rw-r--r--arch/s390/kernel/ipl.c15
-rw-r--r--arch/s390/kvm/kvm-s390.c23
-rw-r--r--arch/s390/kvm/priv.c2
-rw-r--r--arch/s390/lib/Makefile2
-rw-r--r--arch/s390/lib/delay.c2
-rw-r--r--arch/s390/lib/ucmpdi2.c26
-rw-r--r--arch/sh/Kconfig.debug4
-rw-r--r--arch/sh/boards/mach-se/7206/io.c2
-rw-r--r--arch/sh/boards/mach-se/7724/setup.c148
-rw-r--r--arch/sh/configs/migor_defconfig53
-rw-r--r--arch/sh/configs/se7724_defconfig25
-rw-r--r--arch/sh/include/asm/perf_counter.h4
-rw-r--r--arch/sh/include/asm/syscall_32.h1
-rw-r--r--arch/sh/include/asm/thread_info.h2
-rw-r--r--arch/sh/include/mach-se/mach/se7724.h5
-rw-r--r--arch/sh/mm/fault_32.c61
-rw-r--r--arch/sh/mm/tlbflush_64.c15
-rw-r--r--arch/sparc/boot/Makefile6
-rw-r--r--arch/sparc/boot/piggyback_32.c4
-rw-r--r--arch/sparc/boot/piggyback_64.c1
-rw-r--r--arch/sparc/include/asm/thread_info_32.h4
-rw-r--r--arch/sparc/include/asm/thread_info_64.h4
-rw-r--r--arch/sparc/kernel/irq_64.c45
-rw-r--r--arch/um/drivers/slip_kern.c1
-rw-r--r--arch/um/drivers/slirp_kern.c1
-rw-r--r--arch/um/include/asm/dma-mapping.h4
-rw-r--r--arch/um/include/asm/thread_info.h2
-rw-r--r--arch/um/kernel/sysrq.c4
-rw-r--r--arch/x86/Kconfig13
-rw-r--r--arch/x86/boot/video-bios.c3
-rw-r--r--arch/x86/boot/video-vesa.c4
-rw-r--r--arch/x86/include/asm/atomic_32.h185
-rw-r--r--arch/x86/include/asm/atomic_64.h42
-rw-r--r--arch/x86/include/asm/boot.h6
-rw-r--r--arch/x86/include/asm/fixmap.h10
-rw-r--r--arch/x86/include/asm/msr-index.h4
-rw-r--r--arch/x86/include/asm/nmi.h1
-rw-r--r--arch/x86/include/asm/pci.h2
-rw-r--r--arch/x86/include/asm/percpu.h10
-rw-r--r--arch/x86/include/asm/perf_counter.h3
-rw-r--r--arch/x86/include/asm/proto.h11
-rw-r--r--arch/x86/include/asm/spinlock.h4
-rw-r--r--arch/x86/include/asm/stacktrace.h2
-rw-r--r--arch/x86/include/asm/thread_info.h2
-rw-r--r--arch/x86/kernel/Makefile2
-rw-r--r--arch/x86/kernel/amd_iommu.c4
-rw-r--r--arch/x86/kernel/amd_iommu_init.c13
-rw-r--r--arch/x86/kernel/apic/apic.c2
-rw-r--r--arch/x86/kernel/apic/io_apic.c30
-rw-r--r--arch/x86/kernel/cpu/amd.c4
-rw-r--r--arch/x86/kernel/cpu/common.c3
-rw-r--r--arch/x86/kernel/cpu/cpufreq/powernow-k8.c32
-rw-r--r--arch/x86/kernel/cpu/cpufreq/powernow-k8.h3
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce.c16
-rw-r--r--arch/x86/kernel/cpu/perf_counter.c30
-rw-r--r--arch/x86/kernel/cpu/perfctr-watchdog.c5
-rw-r--r--arch/x86/kernel/dumpstack.c1
-rw-r--r--arch/x86/kernel/dumpstack_32.c6
-rw-r--r--arch/x86/kernel/dumpstack_64.c22
-rw-r--r--arch/x86/kernel/e820.c23
-rw-r--r--arch/x86/kernel/kvm.c2
-rw-r--r--arch/x86/kernel/pci-dma.c2
-rw-r--r--arch/x86/kernel/pci-gart_64.c2
-rw-r--r--arch/x86/kernel/setup.c16
-rw-r--r--arch/x86/kernel/setup_percpu.c219
-rw-r--r--arch/x86/kernel/tlb_uv.c9
-rw-r--r--arch/x86/kernel/traps.c3
-rw-r--r--arch/x86/kvm/mmu.c6
-rw-r--r--arch/x86/kvm/paging_tmpl.h2
-rw-r--r--arch/x86/kvm/vmx.c15
-rw-r--r--arch/x86/kvm/x86.c1
-rw-r--r--arch/x86/kvm/x86_emulate.c2
-rw-r--r--arch/x86/lib/Makefile1
-rw-r--r--arch/x86/lib/atomic64_32.c230
-rw-r--r--arch/x86/lib/clear_page_64.S5
-rw-r--r--arch/x86/lib/copy_user_64.S1
-rw-r--r--arch/x86/lib/delay.c3
-rw-r--r--arch/x86/lib/usercopy_32.c2
-rw-r--r--arch/x86/mm/fault.c9
-rw-r--r--arch/x86/mm/init.c18
-rw-r--r--arch/x86/mm/init_64.c9
-rw-r--r--arch/x86/mm/pageattr.c65
-rw-r--r--arch/x86/oprofile/nmi_int.c2
-rw-r--r--arch/x86/pci/acpi.c59
-rw-r--r--arch/x86/pci/amd_bus.c8
-rw-r--r--arch/x86/power/Makefile2
-rw-r--r--arch/x86/power/cpu.c2
-rw-r--r--arch/xtensa/include/asm/thread_info.h4
-rw-r--r--arch/xtensa/kernel/traps.c6
552 files changed, 34691 insertions, 5012 deletions
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 06c5c7a4afd3..b663f1f10b6a 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -30,7 +30,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
#ifndef MODULE
#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
#else
/*
* To calculate addresses of locally defined variables, GCC uses 32-bit
@@ -49,7 +49,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
: "=&r"(__ptr), "=&r"(tmp_gp)); \
(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
-#define PER_CPU_ATTRIBUTES __used
+#define PER_CPU_DEF_ATTRIBUTES __used
#endif /* MODULE */
@@ -71,7 +71,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
#define __get_cpu_var(var) per_cpu_var(var)
#define __raw_get_cpu_var(var) per_cpu_var(var)
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
#endif /* SMP */
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index d069526bd767..60c83abfde70 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -37,6 +37,7 @@ struct thread_info {
.task = &tsk, \
.exec_domain = &default_exec_domain, \
.addr_limit = KERNEL_DS, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0dd29eb4a0e6..5d60508472f0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -495,10 +495,18 @@ config ARCH_W90X900
select CPU_ARM926T
select ARCH_REQUIRE_GPIOLIB
select GENERIC_GPIO
+ select HAVE_CLK
select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
- Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
- can login www.mcuos.com or www.nuvoton.com to know more.
+ Support for Nuvoton (Winbond logic dept.) ARM9 processor,
+ At present, the w90x900 has been renamed nuc900, regarding
+ the ARM series product line, you can login the following
+ link address to know more.
+
+ <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
+ ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
@@ -639,6 +647,18 @@ config ARCH_OMAP
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
+config ARCH_BCMRING
+ bool "Broadcom BCMRING"
+ depends on MMU
+ select CPU_V6
+ select ARM_AMBA
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ help
+ Support for Broadcom's BCMRing platform.
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
@@ -732,6 +752,8 @@ source "arch/arm/mach-u300/Kconfig"
source "arch/arm/mach-w90x900/Kconfig"
+source "arch/arm/mach-bcmring/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
@@ -1056,6 +1078,11 @@ config HIGHMEM
If unsure, say n.
+config HIGHPTE
+ bool "Allocate 2nd-level pagetables from highmem"
+ depends on HIGHMEM
+ depends on !OUTER_CACHE
+
source "mm/Kconfig"
config LEDS
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a71fd941ade7..a89e4734b8f0 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -99,14 +99,6 @@ config DEBUG_CLPS711X_UART2
output to the second serial port on these devices. Saying N will
cause the debug messages to appear on the first serial port.
-config DEBUG_S3C_PORT
- depends on DEBUG_LL && PLAT_S3C
- bool "Kernel low-level debugging messages via S3C UART"
- help
- Say Y here if you want debug print routines to go to one of the
- S3C internal UARTs. The chosen UART must have been configured
- before it is used.
-
config DEBUG_S3C_UART
depends on PLAT_S3C
int "S3C UART to use for low-level debug"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d1..b9ae98b88a7e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -112,6 +112,7 @@ endif
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_AT91) := at91
+machine-$(CONFIG_ARCH_BCMRING) := bcmring
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_DAVINCI) := davinci
machine-$(CONFIG_ARCH_EBSA110) := ebsa110
diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
new file mode 100644
index 000000000000..bcc0bac551a5
--- /dev/null
+++ b/arch/arm/configs/bcmring_defconfig
@@ -0,0 +1,725 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Fri Jul 17 12:07:28 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_BCMRING=y
+# CONFIG_ARCH_FPGA11107 is not set
+CONFIG_ARCH_BCM11107=y
+
+#
+# BCMRING Options
+#
+CONFIG_BCM_ZRELADDR=0x8000
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0e000000
+CONFIG_ZBOOT_ROM_BSS=0x0ea00000
+CONFIG_ZBOOT_ROM=y
+CONFIG_CMDLINE=""
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_INET is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_BCM_UMI=y
+CONFIG_MTD_NAND_BCM_UMI_HWCS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=64
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_FSNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+# CONFIG_JFFS2_FS_SECURITY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
new file mode 100644
index 000000000000..601e7f3d5e97
--- /dev/null
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -0,0 +1,1338 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 14:57:55 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+# CONFIG_MACH_AFEB9260 is not set
+# CONFIG_MACH_USB_A9260 is not set
+# CONFIG_MACH_QIL_A9260 is not set
+CONFIG_MACH_CPU9260=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
new file mode 100644
index 000000000000..b5b9cbbc6977
--- /dev/null
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -0,0 +1,1328 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 15:03:43 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+# CONFIG_MACH_AT91SAM9G20EK is not set
+CONFIG_MACH_CPU9G20=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig
new file mode 100644
index 000000000000..4901827253fb
--- /dev/null
+++ b/arch/arm/configs/cpuat91_defconfig
@@ -0,0 +1,1316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 14:45:01 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_MACH_ONEARM is not set
+# CONFIG_ARCH_AT91RM9200DK is not set
+# CONFIG_MACH_AT91RM9200EK is not set
+# CONFIG_MACH_CSB337 is not set
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_YL9200 is not set
+CONFIG_MACH_CPUAT91=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91RM9200 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index 8e74c66f239d..605a8462f172 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -1,109 +1,246 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc2
-# Sun Aug 14 19:26:59 2005
+# Linux kernel version: 2.6.30-rc8
+# Wed Jun 3 13:52:33 2009
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
+CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
-# Loadable module support
+# IO Schedulers
#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
#
# System Type
#
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
#
-# AT91RM9200 Implementations
+# AT91RM9200 Board Type
#
+# CONFIG_MACH_ONEARM is not set
# CONFIG_ARCH_AT91RM9200DK is not set
# CONFIG_MACH_AT91RM9200EK is not set
# CONFIG_MACH_CSB337 is not set
# CONFIG_MACH_CSB637 is not set
# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
CONFIG_MACH_KB9200=y
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_YL9200 is not set
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
@@ -112,23 +249,48 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
#
# Bus support
#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
@@ -137,8 +299,16 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x10000000
CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@@ -149,74 +319,251 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
#
-# Device Drivers
+# Networking options
#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
-# Generic Driver Options
+# Network testing
#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-CONFIG_DEBUG_DRIVER=y
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
-# Memory Technology Devices (MTD)
+# Device Drivers
#
-# CONFIG_MTD is not set
#
-# Parallel port support
+# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
#
-# IO Schedulers
+# EEPROM support
#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
@@ -232,145 +579,87 @@ CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# SCSI Transport Attributes
+# SCSI Transports
#
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
#
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-# CONFIG_NET_RADIO is not set
#
-# Wan interfaces
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -380,7 +669,6 @@ CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -390,23 +678,25 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -419,215 +709,362 @@ CONFIG_HW_CONSOLE=y
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
-# IPMI
+# Memory mapped GPIO expanders:
#
-# CONFIG_IPMI_HANDLER is not set
#
-# Watchdog Cards
+# I2C GPIO expanders:
#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_AT91RM9200_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
#
-# Ftape, the floppy tape device driver
+# PCI GPIO expanders:
#
-# CONFIG_RAW_DRIVER is not set
#
-# TPM devices
+# SPI GPIO expanders:
#
-# CONFIG_AT91_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
#
-# I2C support
+# Watchdog Device Drivers
#
-# CONFIG_I2C is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Misc devices
+# Sonics Silicon Backplane
#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia drivers
#
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_FB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
#
-# USB HID Boot Protocol drivers
+# also be needed; see USB_STORAGE Help for more info
#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
+# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
-# USB Multimedia devices
+# USB port drivers
#
-# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_SERIAL is not set
#
-# Video4Linux support is needed for USB Multimedia device support
+# USB Miscellaneous drivers
#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
#
-# USB Network Adapters
+# OTG and related infrastructure
#
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# USB port drivers
+# MMC/SD/SDIO Card Drivers
#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
-# USB Serial Converter support
+# MMC/SD/SDIO Host Controller Drivers
#
-# CONFIG_USB_SERIAL is not set
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# USB Miscellaneous drivers
+# RTC interfaces
#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# USB DSL modem support
+# SPI RTC drivers
#
#
-# USB Gadget Support
+# Platform RTC drivers
#
-# CONFIG_USB_GADGET is not set
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# MMC/SD Card support
+# on-CPU RTC drivers
#
-# CONFIG_MMC is not set
+CONFIG_RTC_DRV_AT91RM9200=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
-# XFS support
+# Caches
#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
@@ -639,7 +1076,7 @@ CONFIG_AUTOFS4_FS=y
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
@@ -649,53 +1086,70 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
+# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
@@ -719,7 +1173,7 @@ CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
+# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
@@ -733,47 +1187,119 @@ CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2d58b8fe59be..b49810461e41 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -260,6 +260,7 @@ CONFIG_MACH_NEXCODER_2440=y
CONFIG_SMDK2440_CPU2440=y
CONFIG_MACH_AT2440EVB=y
CONFIG_CPU_S3C2442=y
+CONFIG_MACH_MINI2440=y
#
# S3C2442 Machines
@@ -2298,7 +2299,6 @@ CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
CONFIG_DEBUG_S3C_UART=0
#
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 2e8fa50e9a09..32860609e057 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -816,7 +816,6 @@ CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
CONFIG_DEBUG_S3C_UART=0
#
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 07dfb98df4f0..9d32faef05f6 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -857,7 +857,6 @@ CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_S3C_PORT is not set
CONFIG_DEBUG_S3C_UART=0
#
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 2d827e121147..4762d9001298 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Mon Jun 1 09:18:22 2009
+# Linux kernel version: 2.6.31-rc1
+# Thu Jul 2 00:16:59 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,7 @@ CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
+CONFIG_HAVE_TCM=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +18,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -68,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -81,8 +79,13 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -94,6 +97,10 @@ CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
@@ -106,7 +113,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -138,9 +145,9 @@ CONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -216,8 +223,8 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
CONFIG_COMMON_CLKDEV=y
#
@@ -243,7 +250,6 @@ CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
@@ -258,17 +264,18 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072"
+CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
@@ -359,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -497,6 +505,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -538,6 +547,7 @@ CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
@@ -597,9 +607,11 @@ CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+CONFIG_I2C_STU300=y
#
# External I2C/SMBus adapter drivers
@@ -620,7 +632,6 @@ CONFIG_I2C_HELPER_AUTO=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -635,6 +646,7 @@ CONFIG_SPI_MASTER=y
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PL022=y
#
# SPI Protocol Masters
@@ -647,6 +659,7 @@ CONFIG_POWER_SUPPLY=y
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
@@ -657,6 +670,7 @@ CONFIG_WATCHDOG=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_COH901327_WATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
@@ -678,22 +692,9 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+CONFIG_AB3100_CORE=y
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -760,6 +761,11 @@ CONFIG_SND_JACK=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
@@ -770,7 +776,7 @@ CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
#
@@ -797,7 +803,7 @@ CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
@@ -845,6 +851,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -887,7 +894,10 @@ CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -900,16 +910,20 @@ CONFIG_REGULATOR=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
#
# Caches
@@ -1033,6 +1047,7 @@ CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -1063,18 +1078,16 @@ CONFIG_DEBUG_INFO=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1109,6 +1122,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 39c8bc1a006a..d74265cffd86 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -11,4 +11,38 @@ extern void mcount(void);
#endif
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+/*
+ * return_address uses walk_stackframe to do it's work. If both
+ * CONFIG_FRAME_POINTER=y and CONFIG_ARM_UNWIND=y walk_stackframe uses unwind
+ * information. For this to work in the function tracer many functions would
+ * have to be marked with __notrace. So for now just depend on
+ * !CONFIG_ARM_UNWIND.
+ */
+
+void *return_address(unsigned int);
+
+#else
+
+extern inline void *return_address(unsigned int level)
+{
+ return NULL;
+}
+
+#endif
+
+#define HAVE_ARCH_CALLER_ADDR
+
+#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#define CALLER_ADDR1 ((unsigned long)return_address(1))
+#define CALLER_ADDR2 ((unsigned long)return_address(2))
+#define CALLER_ADDR3 ((unsigned long)return_address(3))
+#define CALLER_ADDR4 ((unsigned long)return_address(4))
+#define CALLER_ADDR5 ((unsigned long)return_address(5))
+#define CALLER_ADDR6 ((unsigned long)return_address(6))
+
+#endif /* ifndef __ASSEMBLY__ */
+
#endif /* _ASM_ARM_FTRACE */
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index be962c1349c4..9c746af1bf6e 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -12,7 +12,7 @@
/* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT 12
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 3dcd64bf1824..b12cc98bbe04 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -36,6 +36,8 @@ extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
#define pgd_alloc(mm) get_pgd_slow(mm)
#define pgd_free(mm, pgd) free_pgd_slow(mm, pgd)
+#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+
/*
* Allocate one PTE table.
*
@@ -57,7 +59,7 @@ pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
{
pte_t *pte;
- pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+ pte = (pte_t *)__get_free_page(PGALLOC_GFP);
if (pte) {
clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE);
pte += PTRS_PER_PTE;
@@ -71,10 +73,16 @@ pte_alloc_one(struct mm_struct *mm, unsigned long addr)
{
struct page *pte;
- pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+#ifdef CONFIG_HIGHPTE
+ pte = alloc_pages(PGALLOC_GFP | __GFP_HIGHMEM, 0);
+#else
+ pte = alloc_pages(PGALLOC_GFP, 0);
+#endif
if (pte) {
- void *page = page_address(pte);
- clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+ if (!PageHighMem(pte)) {
+ void *page = page_address(pte);
+ clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+ }
pgtable_page_ctor(pte);
}
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 1cd2d6416bda..201ccaa11f61 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -162,10 +162,8 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
* entries are stored 1024 bytes below.
*/
#define L_PTE_PRESENT (1 << 0)
-#define L_PTE_FILE (1 << 1) /* only when !PRESENT */
#define L_PTE_YOUNG (1 << 1)
-#define L_PTE_BUFFERABLE (1 << 2) /* obsolete, matches PTE */
-#define L_PTE_CACHEABLE (1 << 3) /* obsolete, matches PTE */
+#define L_PTE_FILE (1 << 2) /* only when !PRESENT */
#define L_PTE_DIRTY (1 << 6)
#define L_PTE_WRITE (1 << 7)
#define L_PTE_USER (1 << 8)
@@ -264,10 +262,19 @@ extern struct page *empty_zero_page;
#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0)
#define pte_page(pte) (pfn_to_page(pte_pfn(pte)))
#define pte_offset_kernel(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map_nested(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_unmap(pte) do { } while (0)
-#define pte_unmap_nested(pte) do { } while (0)
+
+#define pte_offset_map(dir,addr) (__pte_map(dir, KM_PTE0) + __pte_index(addr))
+#define pte_offset_map_nested(dir,addr) (__pte_map(dir, KM_PTE1) + __pte_index(addr))
+#define pte_unmap(pte) __pte_unmap(pte, KM_PTE0)
+#define pte_unmap_nested(pte) __pte_unmap(pte, KM_PTE1)
+
+#ifndef CONFIG_HIGHPTE
+#define __pte_map(dir,km) pmd_page_vaddr(*(dir))
+#define __pte_unmap(pte,km) do { } while (0)
+#else
+#define __pte_map(dir,km) ((pte_t *)kmap_atomic(pmd_page(*(dir)), km) + PTRS_PER_PTE)
+#define __pte_unmap(pte,km) kunmap_atomic((pte - PTRS_PER_PTE), km)
+#endif
#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
@@ -285,15 +292,6 @@ extern struct page *empty_zero_page;
#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG)
#define pte_special(pte) (0)
-/*
- * The following only works if pte_present() is not true.
- */
-#define pte_file(pte) (pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x) (pte_val(x) >> 2)
-#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE)
-
-#define PTE_FILE_MAX_BITS 30
-
#define PTE_BIT_FUNC(fn,op) \
static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
@@ -384,16 +382,50 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-/* Encode and decode a swap entry.
+/*
+ * Encode and decode a swap entry. Swap entries are stored in the Linux
+ * page tables as follows:
+ *
+ * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * <--------------- offset --------------------> <- type --> 0 0 0
*
- * We support up to 32GB of swap on 4k machines
+ * This gives us up to 63 swap files and 32GB per swap file. Note that
+ * the offset field is always non-zero.
*/
-#define __swp_type(x) (((x).val >> 2) & 0x7f)
-#define __swp_offset(x) ((x).val >> 9)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __SWP_TYPE_SHIFT 3
+#define __SWP_TYPE_BITS 6
+#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1)
+#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+
+#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
+#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
+
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val })
+/*
+ * It is an error for the kernel to have more swap files than we can
+ * encode in the PTEs. This ensures that we know when MAX_SWAPFILES
+ * is increased beyond what we presently support.
+ */
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
+
+/*
+ * Encode and decode a file entry. File entries are stored in the Linux
+ * page tables as follows:
+ *
+ * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * <----------------------- offset ------------------------> 1 0 0
+ */
+#define pte_file(pte) (pte_val(pte) & L_PTE_FILE)
+#define pte_to_pgoff(x) (pte_val(x) >> 3)
+#define pgoff_to_pte(x) __pte(((x) << 3) | L_PTE_FILE)
+
+#define PTE_FILE_MAX_BITS 29
+
/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
/* FIXME: this is not correct */
#define kern_addr_valid(addr) (1)
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 4f8848260ee2..e20d80539b42 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -73,7 +73,7 @@ struct thread_info {
.task = &tsk, \
.exec_domain = &default_exec_domain, \
.flags = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.cpu_domain = domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
@@ -140,6 +140,7 @@ extern void vfp_sync_state(struct thread_info *thread);
#define TIF_USING_IWMMXT 17
#define TIF_MEMDIE 18
#define TIF_FREEZE 19
+#define TIF_RESTORE_SIGMASK 20
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
@@ -147,6 +148,7 @@ extern void vfp_sync_state(struct thread_info *thread);
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT)
#define _TIF_FREEZE (1 << TIF_FREEZE)
+#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
/*
* Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 0e97b8cb77d5..9122c9ee18fb 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -360,8 +360,8 @@
#define __NR_readlinkat (__NR_SYSCALL_BASE+332)
#define __NR_fchmodat (__NR_SYSCALL_BASE+333)
#define __NR_faccessat (__NR_SYSCALL_BASE+334)
- /* 335 for pselect6 */
- /* 336 for ppoll */
+#define __NR_pselect6 (__NR_SYSCALL_BASE+335)
+#define __NR_ppoll (__NR_SYSCALL_BASE+336)
#define __NR_unshare (__NR_SYSCALL_BASE+337)
#define __NR_set_robust_list (__NR_SYSCALL_BASE+338)
#define __NR_get_robust_list (__NR_SYSCALL_BASE+339)
@@ -372,7 +372,7 @@
#define __NR_vmsplice (__NR_SYSCALL_BASE+343)
#define __NR_move_pages (__NR_SYSCALL_BASE+344)
#define __NR_getcpu (__NR_SYSCALL_BASE+345)
- /* 346 for epoll_pwait */
+#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346)
#define __NR_kexec_load (__NR_SYSCALL_BASE+347)
#define __NR_utimensat (__NR_SYSCALL_BASE+348)
#define __NR_signalfd (__NR_SYSCALL_BASE+349)
@@ -432,6 +432,7 @@
#define __ARCH_WANT_SYS_SIGPENDING
#define __ARCH_WANT_SYS_SIGPROCMASK
#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
#define __ARCH_WANT_SYS_TIME
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index ff89d0b3abc5..3213c9382b17 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -8,10 +8,12 @@ ifdef CONFIG_DYNAMIC_FTRACE
CFLAGS_REMOVE_ftrace.o = -pg
endif
+CFLAGS_REMOVE_return_address.o = -pg
+
# Object file lists.
obj-y := compat.o elf.o entry-armv.o entry-common.o irq.o \
- process.o ptrace.o setup.o signal.o \
+ process.o ptrace.o return_address.o setup.o signal.o \
sys_arm.o stacktrace.o time.o traps.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index f776e72a4cb8..ecfa98954d1d 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -81,7 +81,7 @@
CALL(sys_ni_syscall) /* was sys_ssetmask */
/* 70 */ CALL(sys_setreuid16)
CALL(sys_setregid16)
- CALL(sys_sigsuspend_wrapper)
+ CALL(sys_sigsuspend)
CALL(sys_sigpending)
CALL(sys_sethostname)
/* 75 */ CALL(sys_setrlimit)
@@ -188,7 +188,7 @@
CALL(sys_rt_sigpending)
CALL(sys_rt_sigtimedwait)
CALL(sys_rt_sigqueueinfo)
- CALL(sys_rt_sigsuspend_wrapper)
+ CALL(sys_rt_sigsuspend)
/* 180 */ CALL(ABI(sys_pread64, sys_oabi_pread64))
CALL(ABI(sys_pwrite64, sys_oabi_pwrite64))
CALL(sys_chown16)
@@ -344,8 +344,8 @@
CALL(sys_readlinkat)
CALL(sys_fchmodat)
CALL(sys_faccessat)
-/* 335 */ CALL(sys_ni_syscall) /* eventually pselect6 */
- CALL(sys_ni_syscall) /* eventually ppoll */
+/* 335 */ CALL(sys_pselect6)
+ CALL(sys_ppoll)
CALL(sys_unshare)
CALL(sys_set_robust_list)
CALL(sys_get_robust_list)
@@ -355,7 +355,7 @@
CALL(sys_vmsplice)
CALL(sys_move_pages)
/* 345 */ CALL(sys_getcpu)
- CALL(sys_ni_syscall) /* eventually epoll_pwait */
+ CALL(sys_epoll_pwait)
CALL(sys_kexec_load)
CALL(sys_utimensat)
CALL(sys_signalfd)
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 99995c2b2312..769abe15cf91 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -31,7 +31,7 @@ void crunch_task_release(struct thread_info *thread)
static int crunch_enabled(u32 devcfg)
{
- return !!(devcfg & EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE);
+ return !!(devcfg & EP93XX_SYSCON_DEVCFG_CPENA);
}
static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
@@ -56,11 +56,16 @@ static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
break;
case THREAD_NOTIFY_SWITCH:
- devcfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+ devcfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
if (crunch_enabled(devcfg) || crunch_owner == crunch_state) {
- devcfg ^= EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
+ /*
+ * We don't use ep93xx_syscon_swlocked_write() here
+ * because we are on the context switch path and
+ * preemption is already disabled.
+ */
+ devcfg ^= EP93XX_SYSCON_DEVCFG_CPENA;
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(devcfg, EP93XX_SYSCON_DEVICE_CONFIG);
+ __raw_writel(devcfg, EP93XX_SYSCON_DEVCFG);
}
break;
}
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41a..bfa7f0af7ede 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -373,16 +373,6 @@ sys_clone_wrapper:
b sys_clone
ENDPROC(sys_clone_wrapper)
-sys_sigsuspend_wrapper:
- add r3, sp, #S_OFF
- b sys_sigsuspend
-ENDPROC(sys_sigsuspend_wrapper)
-
-sys_rt_sigsuspend_wrapper:
- add r2, sp, #S_OFF
- b sys_rt_sigsuspend
-ENDPROC(sys_rt_sigsuspend_wrapper)
-
sys_sigreturn_wrapper:
add r0, sp, #S_OFF
b sys_sigreturn
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 096f600dc8d8..b7c3490eaa24 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -98,17 +98,6 @@ unlock:
return 0;
}
-/* Handle bad interrupts */
-static struct irq_desc bad_irq_desc = {
- .handle_irq = handle_bad_irq,
- .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
-};
-
-#ifdef CONFIG_CPUMASK_OFFSTACK
-/* We are not allocating bad_irq_desc.affinity or .pending_mask */
-#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
-#endif
-
/*
* do_IRQ handles all hardware IRQ's. Decoded IRQs should not
* come via this function. Instead, they should provide their
@@ -124,10 +113,13 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
* Some hardware gives randomly wrong interrupts. Rather
* than crashing, do something sensible.
*/
- if (irq >= NR_IRQS)
- handle_bad_irq(irq, &bad_irq_desc);
- else
+ if (unlikely(irq >= NR_IRQS)) {
+ if (printk_ratelimit())
+ printk(KERN_WARNING "Bad IRQ%u\n", irq);
+ ack_bad_irq(irq);
+ } else {
generic_handle_irq(irq);
+ }
/* AT91 specific workaround */
irq_finish(irq);
@@ -165,10 +157,6 @@ void __init init_IRQ(void)
for (irq = 0; irq < NR_IRQS; irq++)
irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
-#ifdef CONFIG_SMP
- cpumask_setall(bad_irq_desc.affinity);
- bad_irq_desc.node = smp_processor_id();
-#endif
init_arch_irq();
}
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
new file mode 100644
index 000000000000..df246da4ceca
--- /dev/null
+++ b/arch/arm/kernel/return_address.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/kernel/return_address.c
+ *
+ * Copyright (C) 2009 Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ * for Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/module.h>
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+#include <linux/sched.h>
+
+#include <asm/stacktrace.h>
+
+struct return_address_data {
+ unsigned int level;
+ void *addr;
+};
+
+static int save_return_addr(struct stackframe *frame, void *d)
+{
+ struct return_address_data *data = d;
+
+ if (!data->level) {
+ data->addr = (void *)frame->lr;
+
+ return 1;
+ } else {
+ --data->level;
+ return 0;
+ }
+}
+
+void *return_address(unsigned int level)
+{
+ struct return_address_data data;
+ struct stackframe frame;
+ register unsigned long current_sp asm ("sp");
+
+ data.level = level + 1;
+
+ frame.fp = (unsigned long)__builtin_frame_address(0);
+ frame.sp = current_sp;
+ frame.lr = (unsigned long)__builtin_return_address(0);
+ frame.pc = (unsigned long)return_address;
+
+ walk_stackframe(&frame, save_return_addr, &data);
+
+ if (!data.level)
+ return data.addr;
+ else
+ return NULL;
+}
+
+#else /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */
+
+#if defined(CONFIG_ARM_UNWIND)
+#warning "TODO: return_address should use unwind tables"
+#endif
+
+void *return_address(unsigned int level)
+{
+ return NULL;
+}
+
+#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
+
+EXPORT_SYMBOL_GPL(return_address);
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 93bb4247b7ed..e27ee1f701d5 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -47,57 +47,22 @@ const unsigned long sigreturn_codes[7] = {
MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
};
-static int do_signal(sigset_t *oldset, struct pt_regs * regs, int syscall);
-
/*
* atomically swap in the new signal mask, and wait for a signal.
*/
-asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask, struct pt_regs *regs)
+asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
{
- sigset_t saveset;
-
mask &= _BLOCKABLE;
spin_lock_irq(&current->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
siginitset(&current->blocked, mask);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
- regs->ARM_r0 = -EINTR;
-
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(&saveset, regs, 0))
- return regs->ARM_r0;
- }
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs)
-{
- sigset_t saveset, newset;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (copy_from_user(&newset, unewset, sizeof(newset)))
- return -EFAULT;
- sigdelsetmask(&newset, ~_BLOCKABLE);
-
- spin_lock_irq(&current->sighand->siglock);
- saveset = current->blocked;
- current->blocked = newset;
- recalc_sigpending();
- spin_unlock_irq(&current->sighand->siglock);
- regs->ARM_r0 = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(&saveset, regs, 0))
- return regs->ARM_r0;
- }
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_restore_sigmask();
+ return -ERESTARTNOHAND;
}
asmlinkage int
@@ -545,7 +510,7 @@ static inline void setup_syscall_restart(struct pt_regs *regs)
/*
* OK, we're invoking a handler
*/
-static void
+static int
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs, int syscall)
@@ -596,7 +561,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
if (ret != 0) {
force_sigsegv(sig, tsk);
- return;
+ return ret;
}
/*
@@ -610,6 +575,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
recalc_sigpending();
spin_unlock_irq(&tsk->sighand->siglock);
+ return 0;
}
/*
@@ -621,7 +587,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
-static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
+static void do_signal(struct pt_regs *regs, int syscall)
{
struct k_sigaction ka;
siginfo_t info;
@@ -634,7 +600,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
* if so.
*/
if (!user_mode(regs))
- return 0;
+ return;
if (try_to_freeze())
goto no_signal;
@@ -643,9 +609,24 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
- handle_signal(signr, &ka, &info, oldset, regs, syscall);
+ sigset_t *oldset;
+
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = &current->saved_sigmask;
+ else
+ oldset = &current->blocked;
+ if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
+ /*
+ * A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag.
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
single_step_set(current);
- return 1;
+ return;
}
no_signal:
@@ -697,14 +678,21 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
regs->ARM_r0 == -ERESTARTNOINTR) {
setup_syscall_restart(regs);
}
+
+ /* If there's no signal to deliver, we just put the saved sigmask
+ * back.
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+ }
}
single_step_set(current);
- return 0;
}
asmlinkage void
do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
{
if (thread_flags & _TIF_SIGPENDING)
- do_signal(&current->blocked, regs, syscall);
+ do_signal(regs, syscall);
}
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 9f444e5cc165..20b7411e47fd 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -21,7 +21,7 @@
* Note that with framepointer enabled, even the leaf functions have the same
* prologue and epilogue, therefore we can ignore the LR value in this case.
*/
-int unwind_frame(struct stackframe *frame)
+int notrace unwind_frame(struct stackframe *frame)
{
unsigned long high, low;
unsigned long fp = frame->fp;
@@ -43,7 +43,7 @@ int unwind_frame(struct stackframe *frame)
}
#endif
-void walk_stackframe(struct stackframe *frame,
+void notrace walk_stackframe(struct stackframe *frame,
int (*fn)(struct stackframe *, void *), void *data)
{
while (1) {
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 4340bf3d2c84..69371028a202 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -6,6 +6,7 @@
#include <asm-generic/vmlinux.lds.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
+#include <asm/page.h>
OUTPUT_ARCH(arm)
ENTRY(stext)
@@ -63,7 +64,7 @@ SECTIONS
usr/built-in.o(.init.ramfs)
__initramfs_end = .;
#endif
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__per_cpu_load = .;
__per_cpu_start = .;
*(.data.percpu.page_aligned)
@@ -73,7 +74,7 @@ SECTIONS
#ifndef CONFIG_XIP_KERNEL
__init_begin = _stext;
INIT_DATA
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
#endif
}
@@ -118,7 +119,7 @@ SECTIONS
*(.got) /* Global offset table */
}
- RODATA
+ RO_DATA(PAGE_SIZE)
_etext = .; /* End of text and rodata section */
@@ -158,17 +159,17 @@ SECTIONS
*(.data.init_task)
#ifdef CONFIG_XIP_KERNEL
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__init_begin = .;
INIT_DATA
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
#endif
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__nosave_begin = .;
*(.data.nosave)
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__nosave_end = .;
/*
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 323b47f2b52f..a24d824c428b 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -23,6 +23,12 @@ config ARCH_AT91SAM9261
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+config ARCH_AT91SAM9G10
+ bool "AT91SAM9G10"
+ select CPU_ARM926T
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+
config ARCH_AT91SAM9263
bool "AT91SAM9263"
select CPU_ARM926T
@@ -41,6 +47,12 @@ config ARCH_AT91SAM9G20
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+config ARCH_AT91SAM9G45
+ bool "AT91SAM9G45"
+ select CPU_ARM926T
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+
config ARCH_AT91CAP9
bool "AT91CAP9"
select CPU_ARM926T
@@ -144,6 +156,13 @@ config MACH_YL9200
help
Select this if you are using the ucDragon YL-9200 board.
+config MACH_CPUAT91
+ bool "Eukrea CPUAT91"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using the Eukrea Electromatique's
+ CPUAT91 board <http://www.eukrea.com/>.
+
endif
# ----------------------------------------------------------
@@ -205,6 +224,13 @@ config MACH_QIL_A9260
Select this if you are using a Calao Systems QIL-A9260 Board.
<http://www.calao-systems.com>
+config MACH_CPU9260
+ bool "Eukrea CPU9260 board"
+ depends on ARCH_AT91SAM9260
+ help
+ Select this if you are using a Eukrea Electromatique's
+ CPU9260 Board <http://www.eukrea.com/>
+
endif
# ----------------------------------------------------------
@@ -224,6 +250,21 @@ endif
# ----------------------------------------------------------
+if ARCH_AT91SAM9G10
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+ bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9G10
+ help
+ Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
if ARCH_AT91SAM9263
comment "AT91SAM9263 Board Type"
@@ -276,6 +317,29 @@ config MACH_AT91SAM9G20EK
help
Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
+config MACH_CPU9G20
+ bool "Eukrea CPU9G20 board"
+ depends on ARCH_AT91SAM9G20
+ help
+ Select this if you are using a Eukrea Electromatique's
+ CPU9G20 Board <http://www.eukrea.com/>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G45
+
+comment "AT91SAM9G45 Board Type"
+
+config MACH_AT91SAM9G45EKES
+ bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
+ depends on ARCH_AT91SAM9G45
+ help
+ Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
+ "ES" at the end of the name means that this board is an
+ Engineering Sample.
+
endif
# ----------------------------------------------------------
@@ -315,13 +379,13 @@ comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
help
Enable support for the DataFlash card.
config MTD_NAND_ATMEL_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
@@ -383,7 +447,7 @@ config AT91_EARLY_USART2
config AT91_EARLY_USART3
bool "USART3"
- depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+ depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45)
config AT91_EARLY_USART4
bool "USART4"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index c69ff237fd14..a6ed015d82ed 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -13,9 +13,11 @@ obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+ obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
@@ -32,6 +34,7 @@ obj-$(CONFIG_MACH_KAFA) += board-kafa.o
obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
+obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
@@ -40,9 +43,11 @@ obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o
obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o
obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o
+obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o
# AT91SAM9261 board-specific support
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
@@ -54,6 +59,10 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
# AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
+obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
+
+# AT91SAM9G45 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 071a2506a69f..3462b815054a 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -7,6 +7,10 @@ ifeq ($(CONFIG_ARCH_AT91CAP9),y)
zreladdr-y := 0x70008000
params_phys-y := 0x70000100
initrd_phys-y := 0x70410000
+else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
+ zreladdr-y := 0x70008000
+params_phys-y := 0x70000100
+initrd_phys-y := 0x70410000
else
zreladdr-y := 0x20008000
params_phys-y := 0x20000100
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index d74c9ac007e7..ee4ea0e720cf 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1113,6 +1113,122 @@ void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
+/* --------------------------------------------------------------------
+ * CF/IDE
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
+ defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+ defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+ [0] = {
+ .start = AT91_CHIPSELECT_4,
+ .end = AT91_CHIPSELECT_4 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device cf0_device = {
+ .id = 0,
+ .dev = {
+ .platform_data = &cf0_data,
+ },
+ .resource = cf0_resources,
+ .num_resources = ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+ [0] = {
+ .start = AT91_CHIPSELECT_5,
+ .end = AT91_CHIPSELECT_5 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device cf1_device = {
+ .id = 1,
+ .dev = {
+ .platform_data = &cf1_data,
+ },
+ .resource = cf1_resources,
+ .num_resources = ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+ struct platform_device *pdev;
+ unsigned long csa;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+
+ switch (data->chipselect) {
+ case 4:
+ at91_set_multi_drive(AT91_PIN_PC8, 0);
+ at91_set_A_periph(AT91_PIN_PC8, 0);
+ csa |= AT91_MATRIX_CS4A_SMC_CF1;
+ cf0_data = *data;
+ pdev = &cf0_device;
+ break;
+ case 5:
+ at91_set_multi_drive(AT91_PIN_PC9, 0);
+ at91_set_A_periph(AT91_PIN_PC9, 0);
+ csa |= AT91_MATRIX_CS5A_SMC_CF2;
+ cf1_data = *data;
+ pdev = &cf1_device;
+ break;
+ default:
+ printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+ data->chipselect);
+ return;
+ }
+
+ at91_sys_write(AT91_MATRIX_EBICSA, csa);
+
+ if (data->rst_pin) {
+ at91_set_multi_drive(data->rst_pin, 0);
+ at91_set_gpio_output(data->rst_pin, 1);
+ }
+
+ if (data->irq_pin) {
+ at91_set_gpio_input(data->irq_pin, 0);
+ at91_set_deglitch(data->irq_pin, 1);
+ }
+
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 0);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+
+ at91_set_B_periph(AT91_PIN_PC6, 0); /* CFCE1 */
+ at91_set_B_periph(AT91_PIN_PC7, 0); /* CFCE2 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* CFRNW */
+ at91_set_A_periph(AT91_PIN_PC15, 1); /* NWAIT */
+
+ if (data->flags & AT91_CF_TRUE_IDE)
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
+ pdev->name = "pata_at91";
+#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+ pdev->name = "at91_ide";
+#else
+#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
+#endif
+ else
+ pdev->name = "at91_cf";
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_cf(struct at91_cf_data * data) {}
+#endif
/* -------------------------------------------------------------------- */
/*
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 3acd7d7e6a42..4ecf37996c77 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -16,6 +16,7 @@
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <mach/cpu.h>
#include <mach/at91sam9261.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
@@ -30,7 +31,11 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
.pfn = __phys_to_pfn(AT91_BASE_SYS),
.length = SZ_16K,
.type = MT_DEVICE,
- }, {
+ },
+};
+
+static struct map_desc at91sam9261_sram_desc[] __initdata = {
+ {
.virtual = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
.pfn = __phys_to_pfn(AT91SAM9261_SRAM_BASE),
.length = AT91SAM9261_SRAM_SIZE,
@@ -38,6 +43,15 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
},
};
+static struct map_desc at91sam9g10_sram_desc[] __initdata = {
+ {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9G10_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9G10_SRAM_BASE),
+ .length = AT91SAM9G10_SRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -263,6 +277,12 @@ void __init at91sam9261_initialize(unsigned long main_clock)
/* Map peripherals */
iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
+ if (cpu_is_at91sam9g10())
+ iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc));
+ else
+ iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
+
+
at91_arch_reset = at91sam9261_reset;
pm_power_off = at91sam9261_poweroff;
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index b7f233242315..55719a974276 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -707,9 +707,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
* AC97
* -------------------------------------------------------------------- */
-#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct atmel_ac97_data ac97_data;
+static struct ac97c_platform_data ac97_data;
static struct resource ac97_resources[] = {
[0] = {
@@ -725,8 +725,8 @@ static struct resource ac97_resources[] = {
};
static struct platform_device at91sam9263_ac97_device = {
- .name = "ac97c",
- .id = 1,
+ .name = "atmel_ac97c",
+ .id = 0,
.dev = {
.dma_mask = &ac97_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
@@ -736,7 +736,7 @@ static struct platform_device at91sam9263_ac97_device = {
.num_resources = ARRAY_SIZE(ac97_resources),
};
-void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
{
if (!data)
return;
@@ -750,11 +750,11 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data)
if (data->reset_pin)
at91_set_gpio_output(data->reset_pin, 0);
- ac97_data = *ek_data;
+ ac97_data = *data;
platform_device_register(&at91sam9263_ac97_device);
}
#else
-void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
new file mode 100644
index 000000000000..85166b7e69a1
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -0,0 +1,360 @@
+/*
+ * Chip-specific setup code for the AT91SAM9G45 family
+ *
+ * Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pm.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at91sam9g45.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9g45_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9G45_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9G45_SRAM_BASE),
+ .length = AT91SAM9G45_SRAM_SIZE,
+ .type = MT_DEVICE,
+ }
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+ .name = "pioC_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_PIOC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioDE_clk = {
+ .name = "pioDE_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_PIODE,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+ .name = "usart3_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_US3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+ .name = "mci0_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_MCI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+ .name = "twi0_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_TWI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+ .name = "twi1_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_TWI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+ .name = "ssc0_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_SSC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+ .name = "ssc1_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_SSC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+ .name = "tcb_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_TCB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwm_clk = {
+ .name = "pwm_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_PWMC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tsc_clk = {
+ .name = "tsc_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_TSC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+ .name = "dma_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_DMA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk uhphs_clk = {
+ .name = "uhphs_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_UHPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_LCDC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+ .name = "ac97_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_AC97C,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+ .name = "macb_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+ .name = "isi_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+ .name = "udphs_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_UDPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+ .name = "mci1_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_MCI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+/* One additional fake clock for ohci */
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 0,
+ .type = CLK_TYPE_PERIPHERAL,
+ .parent = &uhphs_clk,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioC_clk,
+ &pioDE_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &usart3_clk,
+ &mmc0_clk,
+ &twi0_clk,
+ &twi1_clk,
+ &spi0_clk,
+ &spi1_clk,
+ &ssc0_clk,
+ &ssc1_clk,
+ &tcb_clk,
+ &pwm_clk,
+ &tsc_clk,
+ &dma_clk,
+ &uhphs_clk,
+ &lcdc_clk,
+ &ac97_clk,
+ &macb_clk,
+ &isi_clk,
+ &udphs_clk,
+ &mmc1_clk,
+ // irq0
+ &ohci_clk,
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+
+static void __init at91sam9g45_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9g45_gpio[] = {
+ {
+ .id = AT91SAM9G45_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT91SAM9G45_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT91SAM9G45_ID_PIOC,
+ .offset = AT91_PIOC,
+ .clock = &pioC_clk,
+ }, {
+ .id = AT91SAM9G45_ID_PIODE,
+ .offset = AT91_PIOD,
+ .clock = &pioDE_clk,
+ }, {
+ .id = AT91SAM9G45_ID_PIODE,
+ .offset = AT91_PIOE,
+ .clock = &pioDE_clk,
+ }
+};
+
+static void at91sam9g45_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+static void at91sam9g45_poweroff(void)
+{
+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
+
+/* --------------------------------------------------------------------
+ * AT91SAM9G45 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9g45_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc));
+
+ at91_arch_reset = at91sam9g45_reset;
+ pm_power_off = at91sam9g45_poweroff;
+ at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91sam9g45_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9g45_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C */
+ 1, /* Parallel IO Controller D and E */
+ 0,
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
+ 5, /* USART 3 */
+ 0, /* Multimedia Card Interface 0 */
+ 6, /* Two-Wire Interface 0 */
+ 6, /* Two-Wire Interface 1 */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */
+ 0, /* Pulse Width Modulation Controller */
+ 0, /* Touch Screen Controller */
+ 0, /* DMA Controller */
+ 2, /* USB Host High Speed port */
+ 3, /* LDC Controller */
+ 5, /* AC97 Controller */
+ 3, /* Ethernet */
+ 0, /* Image Sensor Interface */
+ 2, /* USB Device High speed port */
+ 0,
+ 0, /* Multimedia Card Interface 1 */
+ 0,
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+};
+
+void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91sam9g45_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
new file mode 100644
index 000000000000..d746e8621bc2
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -0,0 +1,1230 @@
+/*
+ * On-Chip devices setup code for the AT91SAM9G45 family
+ *
+ * Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
+
+#include <linux/fb.h>
+#include <video/atmel_lcdc.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9g45.h>
+#include <mach/at91sam9g45_matrix.h>
+#include <mach/at91sam9_smc.h>
+
+#include "generic.h"
+
+
+/* --------------------------------------------------------------------
+ * USB Host (OHCI)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_ohci_data;
+
+static struct resource usbh_ohci_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_OHCI_BASE,
+ .end = AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_UHPHS,
+ .end = AT91SAM9G45_ID_UHPHS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_usbh_ohci_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_ohci_data,
+ },
+ .resource = usbh_ohci_resources,
+ .num_resources = ARRAY_SIZE(usbh_ohci_resources),
+};
+
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
+{
+ int i;
+
+ if (!data)
+ return;
+
+ /* Enable VBus control for UHP ports */
+ for (i = 0; i < data->ports; i++) {
+ if (data->vbus_pin[i])
+ at91_set_gpio_output(data->vbus_pin[i], 0);
+ }
+
+ usbh_ohci_data = *data;
+ platform_device_register(&at91_usbh_ohci_device);
+}
+#else
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+static struct resource usba_udc_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_UDPHS_FIFO,
+ .end = AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_BASE_UDPHS,
+ .end = AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = AT91SAM9G45_ID_UDPHS,
+ .end = AT91SAM9G45_ID_UDPHS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
+ [idx] = { \
+ .name = nam, \
+ .index = idx, \
+ .fifo_size = maxpkt, \
+ .nr_banks = maxbk, \
+ .can_dma = dma, \
+ .can_isoc = isoc, \
+ }
+
+static struct usba_ep_data usba_udc_ep[] __initdata = {
+ EP("ep0", 0, 64, 1, 0, 0),
+ EP("ep1", 1, 1024, 2, 1, 1),
+ EP("ep2", 2, 1024, 2, 1, 1),
+ EP("ep3", 3, 1024, 3, 1, 0),
+ EP("ep4", 4, 1024, 3, 1, 0),
+ EP("ep5", 5, 1024, 3, 1, 1),
+ EP("ep6", 6, 1024, 3, 1, 1),
+};
+
+#undef EP
+
+/*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+static struct {
+ struct usba_platform_data pdata;
+ struct usba_ep_data ep[7];
+} usba_udc_data;
+
+static struct platform_device at91_usba_udc_device = {
+ .name = "atmel_usba_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &usba_udc_data.pdata,
+ },
+ .resource = usba_udc_resources,
+ .num_resources = ARRAY_SIZE(usba_udc_resources),
+};
+
+void __init at91_add_device_usba(struct usba_platform_data *data)
+{
+ usba_udc_data.pdata.vbus_pin = -EINVAL;
+ usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
+ memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+
+ if (data && data->vbus_pin > 0) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+ }
+
+ /* Pullup pin is handled internally by USB device peripheral */
+
+ /* Clocks */
+ at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+ at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+ platform_device_register(&at91_usba_udc_device);
+}
+#else
+void __init at91_add_device_usba(struct usba_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_EMAC,
+ .end = AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_EMAC,
+ .end = AT91SAM9G45_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &eth_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &eth_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Pins used for MII and RMII */
+ at91_set_A_periph(AT91_PIN_PA17, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PA16, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PA11, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PA19, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PA18, 0); /* EMDC */
+
+ if (!data->is_rmii) {
+ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PA30, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PA8, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PA9, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PA28, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PA6, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PA7, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */
+ }
+
+ eth_data = *data;
+ platform_device_register(&at91sam9g45_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ [0] = {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_BASE_SYS + AT91_ECC,
+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9g45_nand_device = {
+ .name = "atmel_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct atmel_nand_data *data)
+{
+ unsigned long csa;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ nand_data = *data;
+ platform_device_register(&at91sam9g45_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+static struct i2c_gpio_platform_data pdata_i2c0 = {
+ .sda_pin = AT91_PIN_PA20,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PA21,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91sam9g45_twi0_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev.platform_data = &pdata_i2c0,
+};
+
+static struct i2c_gpio_platform_data pdata_i2c1 = {
+ .sda_pin = AT91_PIN_PB10,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PB11,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91sam9g45_twi1_device = {
+ .name = "i2c-gpio",
+ .id = 1,
+ .dev.platform_data = &pdata_i2c1,
+};
+
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+ i2c_register_board_info(i2c_id, devices, nr_devices);
+
+ if (i2c_id == 0) {
+ at91_set_GPIO_periph(AT91_PIN_PA20, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA21, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+ platform_device_register(&at91sam9g45_twi0_device);
+ } else {
+ at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PB11, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+ platform_device_register(&at91sam9g45_twi1_device);
+ }
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+static struct resource twi0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TWI0,
+ .end = AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TWI0,
+ .end = AT91SAM9G45_ID_TWI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_twi0_device = {
+ .name = "at91_i2c",
+ .id = 0,
+ .resource = twi0_resources,
+ .num_resources = ARRAY_SIZE(twi0_resources),
+};
+
+static struct resource twi1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TWI1,
+ .end = AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TWI1,
+ .end = AT91SAM9G45_ID_TWI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_twi1_device = {
+ .name = "at91_i2c",
+ .id = 1,
+ .resource = twi1_resources,
+ .num_resources = ARRAY_SIZE(twi1_resources),
+};
+
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+ i2c_register_board_info(i2c_id, devices, nr_devices);
+
+ /* pins used for TWI interface */
+ if (i2c_id == 0) {
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+ platform_device_register(&at91sam9g45_twi0_device);
+ } else {
+ at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+ at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+ platform_device_register(&at91sam9g45_twi1_device);
+ }
+}
+#else
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SPI0,
+ .end = AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SPI0,
+ .end = AT91SAM9G45_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SPI1,
+ .end = AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SPI1,
+ .end = AT91SAM9G45_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */
+
+ at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk");
+ platform_device_register(&at91sam9g45_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk");
+ platform_device_register(&at91sam9g45_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_LCDC_BASE,
+ .end = AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_LCDC,
+ .end = AT91SAM9G45_ID_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_lcdc_device = {
+ .name = "atmel_lcdfb",
+ .id = 0,
+ .dev = {
+ .dma_mask = &lcdc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
+
+ at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
+ at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PE6, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */
+ at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */
+ at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */
+ at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */
+ at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */
+ at91_set_A_periph(AT91_PIN_PE20, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */
+ at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */
+ at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */
+ at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */
+ at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */
+ at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */
+ at91_set_A_periph(AT91_PIN_PE28, 0); /* LCDD21 */
+ at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
+ at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
+
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Timer/Counter block
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+static struct resource tcb0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TCB0,
+ .end = AT91SAM9G45_BASE_TCB0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TCB,
+ .end = AT91SAM9G45_ID_TCB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_tcb0_device = {
+ .name = "atmel_tcb",
+ .id = 0,
+ .resource = tcb0_resources,
+ .num_resources = ARRAY_SIZE(tcb0_resources),
+};
+
+/* TCB1 begins with TC3 */
+static struct resource tcb1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TCB1,
+ .end = AT91SAM9G45_BASE_TCB1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TCB,
+ .end = AT91SAM9G45_ID_TCB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_tcb1_device = {
+ .name = "atmel_tcb",
+ .id = 1,
+ .resource = tcb1_resources,
+ .num_resources = ARRAY_SIZE(tcb1_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+ /* this chip has one clock and irq for all six TC channels */
+ at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
+ platform_device_register(&at91sam9g45_tcb0_device);
+ at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
+ platform_device_register(&at91sam9g45_tcb1_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTC
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct platform_device at91sam9g45_rtc_device = {
+ .name = "at91_rtc",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_rtc(void)
+{
+ platform_device_register(&at91sam9g45_rtc_device);
+}
+#else
+static void __init at91_add_device_rtc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9g45_rtt_device = {
+ .name = "at91_rtt",
+ .id = 0,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at91sam9g45_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9g45_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91sam9g45_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM) || defined(CONFIG_ATMEL_PWM_MODULE)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_PWMC,
+ .end = AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_PWMC,
+ .end = AT91SAM9G45_ID_PWMC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_pwm0_device = {
+ .name = "atmel_pwm",
+ .id = -1,
+ .dev = {
+ .platform_data = &pwm_mask,
+ },
+ .resource = pwm_resources,
+ .num_resources = ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+ if (mask & (1 << AT91_PWM0))
+ at91_set_B_periph(AT91_PIN_PD24, 1); /* enable PWM0 */
+
+ if (mask & (1 << AT91_PWM1))
+ at91_set_B_periph(AT91_PIN_PD31, 1); /* enable PWM1 */
+
+ if (mask & (1 << AT91_PWM2))
+ at91_set_B_periph(AT91_PIN_PD26, 1); /* enable PWM2 */
+
+ if (mask & (1 << AT91_PWM3))
+ at91_set_B_periph(AT91_PIN_PD0, 1); /* enable PWM3 */
+
+ pwm_mask = mask;
+
+ platform_device_register(&at91sam9g45_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SSC0,
+ .end = AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SSC0,
+ .end = AT91SAM9G45_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PD1, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PD0, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PD2, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PD3, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PD4, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PD5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SSC1,
+ .end = AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SSC1,
+ .end = AT91SAM9G45_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PD14, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PD12, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PD10, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PD11, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PD13, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PD15, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9G45_ID_SSC0:
+ pdev = &at91sam9g45_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9G45_ID_SSC1:
+ pdev = &at91sam9g45_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0,
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US0,
+ .end = AT91SAM9G45_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US0,
+ .end = AT91SAM9G45_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PB17, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PB15, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US1,
+ .end = AT91SAM9G45_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US1,
+ .end = AT91SAM9G45_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PD16, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PD17, 0); /* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US2,
+ .end = AT91SAM9G45_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US2,
+ .end = AT91SAM9G45_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PC9, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PC11, 0); /* CTS2 */
+}
+
+static struct resource uart3_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US3,
+ .end = AT91SAM9G45_BASE_US3 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US3,
+ .end = AT91SAM9G45_ID_US3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart3_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart3_device = {
+ .name = "atmel_usart",
+ .id = 4,
+ .dev = {
+ .dma_mask = &uart3_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart3_data,
+ },
+ .resource = uart3_resources,
+ .num_resources = ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD3 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD3 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA23, 0); /* RTS3 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA24, 0); /* CTS3 */
+}
+
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9g45_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US0:
+ pdev = &at91sam9g45_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US1:
+ pdev = &at91sam9g45_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US2:
+ pdev = &at91sam9g45_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US3:
+ pdev = &at91sam9g45_uart3_device;
+ configure_usart3_pins(pins);
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ at91_add_device_rtc();
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
+ at91_add_device_tc();
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 970fd6b6753e..61e52b66bc72 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -174,6 +174,16 @@ static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
},
};
+/*
+ * IDE (CF True IDE mode)
+ */
+static struct at91_cf_data afeb9260_cf_data = {
+ .chipselect = 4,
+ .irq_pin = AT91_PIN_PA6,
+ .rst_pin = AT91_PIN_PA7,
+ .flags = AT91_CF_TRUE_IDE,
+};
+
static void __init afeb9260_board_init(void)
{
/* Serial */
@@ -202,6 +212,8 @@ static void __init afeb9260_board_init(void)
ARRAY_SIZE(afeb9260_i2c_devices));
/* Audio */
at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
+ /* IDE */
+ at91_add_device_cf(&afeb9260_cf_data);
}
MACHINE_START(AFEB9260, "Custom afeb9260 board")
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
new file mode 100644
index 000000000000..4bc2e9f6ebb5
--- /dev/null
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -0,0 +1,385 @@
+/*
+ * linux/arch/arm/mach-at91/board-cpu9krea.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2006 Atmel
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9260_matrix.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+static void __init cpu9krea_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91sam9260_initialize(18432000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
+ ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+ ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART3 on ttyS4. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
+
+ /* USART4 on ttyS5. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+ /* USART5 on ttyS6. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init cpu9krea_init_irq(void)
+{
+ at91sam9260_init_interrupts(NULL);
+}
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
+ .ports = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata cpu9krea_udc_data = {
+ .vbus_pin = AT91_PIN_PC8,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata cpu9krea_macb_data = {
+ .is_rmii = 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct atmel_nand_data __initdata cpu9krea_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC13,
+ .enable_pin = AT91_PIN_PC14,
+ .bus_width_16 = 0,
+};
+
+#ifdef CONFIG_MACH_CPU9260
+static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 2,
+};
+#else
+static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 3,
+};
+#endif
+
+static void __init cpu9krea_add_device_nand(void)
+{
+ sam9_smc_configure(3, &cpu9krea_nand_smc_config);
+ at91_add_device_nand(&cpu9krea_nand_data);
+}
+
+/*
+ * NOR flash
+ */
+static struct physmap_flash_data cpuat9260_nor_data = {
+ .width = 2,
+};
+
+#define NOR_BASE AT91_CHIPSELECT_0
+#define NOR_SIZE SZ_64M
+
+static struct resource nor_flash_resources[] = {
+ {
+ .start = NOR_BASE,
+ .end = NOR_BASE + NOR_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device cpu9krea_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &cpuat9260_nor_data,
+ },
+ .resource = nor_flash_resources,
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+};
+
+#ifdef CONFIG_MACH_CPU9260
+static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 10,
+ .nrd_pulse = 10,
+ .ncs_write_pulse = 6,
+ .nwe_pulse = 6,
+
+ .read_cycle = 12,
+ .write_cycle = 8,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+ | AT91_SMC_DBW_16,
+ .tdf_cycles = 2,
+};
+#else
+static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 13,
+ .nrd_pulse = 13,
+ .ncs_write_pulse = 8,
+ .nwe_pulse = 8,
+
+ .read_cycle = 15,
+ .write_cycle = 10,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+ | AT91_SMC_DBW_16,
+ .tdf_cycles = 2,
+};
+#endif
+
+static __init void cpu9krea_add_device_nor(void)
+{
+ unsigned long csa;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
+
+ /* configure chip-select 0 (NOR) */
+ sam9_smc_configure(0, &cpu9krea_nor_smc_config);
+
+ platform_device_register(&cpu9krea_nor_flash);
+}
+
+/*
+ * LEDs
+ */
+static struct gpio_led cpu9krea_leds[] = {
+ { /* LED1 */
+ .name = "LED1",
+ .gpio = AT91_PIN_PC11,
+ .active_low = 1,
+ .default_trigger = "timer",
+ },
+ { /* LED2 */
+ .name = "LED2",
+ .gpio = AT91_PIN_PC12,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* LED3 */
+ .name = "LED3",
+ .gpio = AT91_PIN_PC7,
+ .active_low = 1,
+ .default_trigger = "none",
+ },
+ { /* LED4 */
+ .name = "LED4",
+ .gpio = AT91_PIN_PC9,
+ .active_low = 1,
+ .default_trigger = "none",
+ }
+};
+
+static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rtc-ds1307", 0x68),
+ .type = "ds1339",
+ },
+};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button cpu9krea_buttons[] = {
+ {
+ .gpio = AT91_PIN_PC3,
+ .code = BTN_0,
+ .desc = "BP1",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PB20,
+ .code = BTN_1,
+ .desc = "BP2",
+ .active_low = 1,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data cpu9krea_button_data = {
+ .buttons = cpu9krea_buttons,
+ .nbuttons = ARRAY_SIZE(cpu9krea_buttons),
+};
+
+static struct platform_device cpu9krea_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &cpu9krea_button_data,
+ }
+};
+
+static void __init cpu9krea_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PC3, 1); /* BP1 */
+ at91_set_deglitch(AT91_PIN_PC3, 1);
+ at91_set_gpio_input(AT91_PIN_PB20, 1); /* BP2 */
+ at91_set_deglitch(AT91_PIN_PB20, 1);
+
+ platform_device_register(&cpu9krea_button_device);
+}
+#else
+static void __init cpu9krea_add_device_buttons(void)
+{
+}
+#endif
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
+ .slot_b = 0,
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PA29,
+};
+
+static void __init cpu9krea_board_init(void)
+{
+ /* NOR */
+ cpu9krea_add_device_nor();
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&cpu9krea_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&cpu9krea_udc_data);
+ /* NAND */
+ cpu9krea_add_device_nand();
+ /* Ethernet */
+ at91_add_device_eth(&cpu9krea_macb_data);
+ /* MMC */
+ at91_add_device_mmc(0, &cpu9krea_mmc_data);
+ /* I2C */
+ at91_add_device_i2c(cpu9krea_i2c_devices,
+ ARRAY_SIZE(cpu9krea_i2c_devices));
+ /* LEDs */
+ at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds));
+ /* Push Buttons */
+ cpu9krea_add_device_buttons();
+}
+
+#ifdef CONFIG_MACH_CPU9260
+MACHINE_START(CPUAT9260, "Eukrea CPU9260")
+#else
+MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
+#endif
+ /* Maintainer: Eric Benard - EUKREA Electromatique */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = cpu9krea_map_io,
+ .init_irq = cpu9krea_init_irq,
+ .init_machine = cpu9krea_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
new file mode 100644
index 000000000000..a28d99656190
--- /dev/null
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -0,0 +1,185 @@
+/*
+ * linux/arch/arm/mach-at91/board-cpuat91.c
+ *
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
+
+#include "generic.h"
+
+static struct gpio_led cpuat91_leds[] = {
+ {
+ .name = "led1",
+ .default_trigger = "heartbeat",
+ .active_low = 1,
+ .gpio = AT91_PIN_PC0,
+ },
+};
+
+static void __init cpuat91_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
+ ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+ ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART2 on ttyS3 (Rx, Tx) */
+ at91_register_uart(AT91RM9200_ID_US2, 3, 0);
+
+ /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init cpuat91_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata cpuat91_eth_data = {
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata cpuat91_usbh_data = {
+ .ports = 1,
+};
+
+static struct at91_udc_data __initdata cpuat91_udc_data = {
+ .vbus_pin = AT91_PIN_PC15,
+ .pullup_pin = AT91_PIN_PC14,
+};
+
+static struct at91_mmc_data __initdata cpuat91_mmc_data = {
+ .det_pin = AT91_PIN_PC2,
+ .wire4 = 1,
+};
+
+static struct physmap_flash_data cpuat91_flash_data = {
+ .width = 2,
+};
+
+static struct resource cpuat91_flash_resource = {
+ .start = AT91_CHIPSELECT_0,
+ .end = AT91_CHIPSELECT_0 + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device cpuat91_norflash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &cpuat91_flash_data,
+ },
+ .resource = &cpuat91_flash_resource,
+ .num_resources = 1,
+};
+
+#ifdef CONFIG_MTD_PLATRAM
+struct platdata_mtd_ram at91_sram_pdata = {
+ .mapname = "SRAM",
+ .bankwidth = 2,
+};
+
+static struct resource at91_sram_resource[] = {
+ [0] = {
+ .start = AT91RM9200_SRAM_BASE,
+ .end = AT91RM9200_SRAM_BASE + AT91RM9200_SRAM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device at91_sram = {
+ .name = "mtd-ram",
+ .id = 0,
+ .resource = at91_sram_resource,
+ .num_resources = ARRAY_SIZE(at91_sram_resource),
+ .dev = {
+ .platform_data = &at91_sram_pdata,
+ },
+};
+#endif /* MTD_PLATRAM */
+
+static struct platform_device *platform_devices[] __initdata = {
+ &cpuat91_norflash,
+#ifdef CONFIG_MTD_PLATRAM
+ &at91_sram,
+#endif /* CONFIG_MTD_PLATRAM */
+};
+
+static void __init cpuat91_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* LEDs. */
+ at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
+ /* Ethernet */
+ at91_add_device_eth(&cpuat91_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&cpuat91_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&cpuat91_udc_data);
+ /* MMC */
+ at91_add_device_mmc(0, &cpuat91_mmc_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* Platform devices */
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+MACHINE_START(CPUAT91, "Eukrea")
+ /* Maintainer: Eric Benard - EUKREA Electromatique */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = cpuat91_map_io,
+ .init_irq = cpuat91_init_irq,
+ .init_machine = cpuat91_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index d5266da55311..f9b19993a7a9 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -287,7 +287,11 @@ static void __init ek_add_device_ts(void) {}
*/
static struct at73c213_board_info at73c213_data = {
.ssc_id = 1,
+#if defined(CONFIG_MACH_AT91SAM9261EK)
.shortname = "AT91SAM9261-EK external DAC",
+#else
+ .shortname = "AT91SAM9G10-EK external DAC",
+#endif
};
#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
@@ -414,6 +418,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
.default_monspecs = &at91fb_default_stn_monspecs,
.atmel_lcdfb_power_control = at91_lcdc_stn_power_control,
.guard_time = 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
+#endif
};
#else
@@ -467,6 +474,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
.default_monspecs = &at91fb_default_tft_monspecs,
.atmel_lcdfb_power_control = at91_lcdc_tft_power_control,
.guard_time = 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
+#endif
};
#endif
@@ -600,7 +610,11 @@ static void __init ek_board_init(void)
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
+#if defined(CONFIG_MACH_AT91SAM9261EK)
MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+#else
+MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
+#endif
/* Maintainer: Atmel */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 57d52528f224..1bf7bd4cbe13 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -364,9 +364,9 @@ static void __init ek_add_device_buttons(void) {}
/*
* AC97
+ * reset_pin is not connected: NRST
*/
-static struct atmel_ac97_data ek_ac97_data = {
- .reset_pin = AT91_PIN_PA13,
+static struct ac97c_platform_data ek_ac97_data = {
};
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index cc270beadd5d..ca470d504ea0 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -24,6 +24,8 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/at73c213.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
#include <linux/clk.h>
#include <mach/hardware.h>
@@ -218,9 +220,60 @@ static struct gpio_led ek_leds[] = {
}
};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ {
+ .gpio = AT91_PIN_PA30,
+ .code = BTN_3,
+ .desc = "Button 3",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PA31,
+ .code = BTN_4,
+ .desc = "Button 4",
+ .active_low = 1,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */
+ at91_set_deglitch(AT91_PIN_PA30, 1);
+ at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */
+ at91_set_deglitch(AT91_PIN_PA31, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
static struct i2c_board_info __initdata ek_i2c_devices[] = {
{
I2C_BOARD_INFO("24c512", 0x50),
+ I2C_BOARD_INFO("wm8731", 0x1b),
},
};
@@ -245,6 +298,8 @@ static void __init ek_board_init(void)
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* Push Buttons */
+ ek_add_device_buttons();
/* PCK0 provides MCLK to the WM8731 */
at91_set_B_periph(AT91_PIN_PC1, 0);
/* SSC (for WM8731) */
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
new file mode 100644
index 000000000000..b8558eae5229
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -0,0 +1,389 @@
+/*
+ * Board-specific setup code for the AT91SAM9M10G45 Evaluation Kit family
+ *
+ * Covers: * AT91SAM9G45-EKES board
+ * * AT91SAM9M10G45-EK board
+ *
+ * Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <video/atmel_lcdc.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 12.000 MHz crystal */
+ at91sam9g45_initialize(12000000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 not connected on the -EK board */
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91sam9g45_init_interrupts(NULL);
+}
+
+
+/*
+ * USB HS Host port (common to OHCI & EHCI)
+ */
+static struct at91_usbh_data __initdata ek_usbh_hs_data = {
+ .ports = 2,
+ .vbus_pin = {AT91_PIN_PD1, AT91_PIN_PD3},
+};
+
+
+/*
+ * USB HS Device port
+ */
+static struct usba_platform_data __initdata ek_usba_udc_data = {
+ .vbus_pin = AT91_PIN_PB19,
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PD5,
+ .is_rmii = 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "Partition 1",
+ .offset = 0,
+ .size = SZ_64M,
+ },
+ {
+ .name = "Partition 2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC8,
+ .enable_pin = AT91_PIN_PC14,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ /* setup bus-width (8 or 16) */
+ if (ek_nand_data.bus_width_16)
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+ {
+ .name = "LG",
+ .refresh = 60,
+ .xres = 480, .yres = 272,
+ .pixclock = KHZ2PICOS(9000),
+
+ .left_margin = 1, .right_margin = 1,
+ .upper_margin = 40, .lower_margin = 1,
+ .hsync_len = 45, .vsync_len = 1,
+
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+ .manufacturer = "LG",
+ .monitor = "LB043WQ1",
+
+ .modedb = at91_tft_vga_modes,
+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
+ .hfmin = 15000,
+ .hfmax = 17640,
+ .vfmin = 57,
+ .vfmax = 67,
+};
+
+#define AT91SAM9G45_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_TFT \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+ .lcdcon_is_backlight = true,
+ .default_bpp = 32,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91SAM9G45_DEFAULT_LCDCON2,
+ .default_monspecs = &at91fb_default_monspecs,
+ .guard_time = 9,
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ { /* BP1, "leftclic" */
+ .code = BTN_LEFT,
+ .gpio = AT91_PIN_PB6,
+ .active_low = 1,
+ .desc = "left_click",
+ .wakeup = 1,
+ },
+ { /* BP2, "rightclic" */
+ .code = BTN_RIGHT,
+ .gpio = AT91_PIN_PB7,
+ .active_low = 1,
+ .desc = "right_click",
+ .wakeup = 1,
+ },
+ /* BP3, "joystick" */
+ {
+ .code = KEY_LEFT,
+ .gpio = AT91_PIN_PB14,
+ .active_low = 1,
+ .desc = "Joystick Left",
+ },
+ {
+ .code = KEY_RIGHT,
+ .gpio = AT91_PIN_PB15,
+ .active_low = 1,
+ .desc = "Joystick Right",
+ },
+ {
+ .code = KEY_UP,
+ .gpio = AT91_PIN_PB16,
+ .active_low = 1,
+ .desc = "Joystick Up",
+ },
+ {
+ .code = KEY_DOWN,
+ .gpio = AT91_PIN_PB17,
+ .active_low = 1,
+ .desc = "Joystick Down",
+ },
+ {
+ .code = KEY_ENTER,
+ .gpio = AT91_PIN_PB18,
+ .active_low = 1,
+ .desc = "Joystick Press",
+ },
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ek_buttons); i++) {
+ at91_set_GPIO_periph(ek_buttons[i].gpio, 1);
+ at91_set_deglitch(ek_buttons[i].gpio, 1);
+ }
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
+/*
+ * LEDs ... these could all be PWM-driven, for variable brightness
+ */
+static struct gpio_led ek_leds[] = {
+ { /* "top" led, red, powerled */
+ .name = "d8",
+ .gpio = AT91_PIN_PD30,
+ .default_trigger = "heartbeat",
+ },
+ { /* "left" led, green, userled2, pwm3 */
+ .name = "d6",
+ .gpio = AT91_PIN_PD0,
+ .active_low = 1,
+ .default_trigger = "nand-disk",
+ },
+#if !(defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE))
+ { /* "right" led, green, userled1, pwm1 */
+ .name = "d7",
+ .gpio = AT91_PIN_PD31,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+#endif
+};
+
+
+/*
+ * PWM Leds
+ */
+static struct gpio_led ek_pwm_led[] = {
+#if defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE)
+ { /* "right" led, green, userled1, pwm1 */
+ .name = "d7",
+ .gpio = 1, /* is PWM channel number */
+ .active_low = 1,
+ .default_trigger = "none",
+ },
+#endif
+};
+
+
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB HS Host */
+ at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+ /* USB HS Device */
+ at91_add_device_usba(&ek_usba_udc_data);
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ /* Ethernet */
+ at91_add_device_eth(&ek_macb_data);
+ /* NAND */
+ ek_add_device_nand();
+ /* I2C */
+ at91_add_device_i2c(0, NULL, 0);
+ /* LCD Controller */
+ at91_add_device_lcdc(&ek_lcdc_data);
+ /* Push Buttons */
+ ek_add_device_buttons();
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+}
+
+MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
+ /* Maintainer: Atmel */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 35e12a49d1a6..9d07679efce7 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -15,6 +15,8 @@
#include <linux/spi/spi.h>
#include <linux/fb.h>
#include <linux/clk.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <video/atmel_lcdc.h>
@@ -186,19 +188,21 @@ static struct fb_monspecs at91fb_default_monspecs = {
static void at91_lcdc_power_control(int on)
{
if (on)
- at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
+ at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */
else
- at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
+ at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */
}
/* Driver datas */
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+ .lcdcon_is_backlight = true,
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN,
.default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2,
.default_monspecs = &at91fb_default_monspecs,
.atmel_lcdfb_power_control = at91_lcdc_power_control,
.guard_time = 1,
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
};
#else
@@ -206,6 +210,79 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
#endif
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* "bottom" led, green, userled1 to be defined */
+ .name = "ds1",
+ .gpio = AT91_PIN_PD15,
+ .active_low = 1,
+ .default_trigger = "none",
+ },
+ { /* "bottom" led, green, userled2 to be defined */
+ .name = "ds2",
+ .gpio = AT91_PIN_PD16,
+ .active_low = 1,
+ .default_trigger = "none",
+ },
+ { /* "power" led, yellow */
+ .name = "ds3",
+ .gpio = AT91_PIN_PD14,
+ .default_trigger = "heartbeat",
+ }
+};
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ {
+ .gpio = AT91_PIN_PB0,
+ .code = BTN_2,
+ .desc = "Right Click",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PB1,
+ .code = BTN_1,
+ .desc = "Left Click",
+ .active_low = 1,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PB1, 1); /* btn1 */
+ at91_set_deglitch(AT91_PIN_PB1, 1);
+ at91_set_gpio_input(AT91_PIN_PB0, 1); /* btn2 */
+ at91_set_deglitch(AT91_PIN_PB0, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
static void __init ek_board_init(void)
{
/* Serial */
@@ -224,6 +301,10 @@ static void __init ek_board_init(void)
at91_add_device_lcdc(&ek_lcdc_data);
/* Touch Screen Controller */
at91_add_device_tsadcc();
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* Push Buttons */
+ ek_add_device_buttons();
}
MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index bac578fe0d3d..c042dcf4725f 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -47,20 +47,25 @@
* Chips have some kind of clocks : group them by functionality
*/
#define cpu_has_utmi() ( cpu_is_at91cap9() \
- || cpu_is_at91sam9rl())
+ || cpu_is_at91sam9rl() \
+ || cpu_is_at91sam9g45())
-#define cpu_has_800M_plla() (cpu_is_at91sam9g20())
+#define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \
+ || cpu_is_at91sam9g45())
-#define cpu_has_pllb() (!cpu_is_at91sam9rl())
+#define cpu_has_300M_plla() (cpu_is_at91sam9g10())
-#define cpu_has_upll() (0)
+#define cpu_has_pllb() (!(cpu_is_at91sam9rl() \
+ || cpu_is_at91sam9g45()))
+
+#define cpu_has_upll() (cpu_is_at91sam9g45())
/* USB host HS & FS */
#define cpu_has_uhp() (!cpu_is_at91sam9rl())
/* USB device FS only */
-#define cpu_has_udpfs() (!cpu_is_at91sam9rl())
-
+#define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \
+ || cpu_is_at91sam9g45()))
static LIST_HEAD(clocks);
static DEFINE_SPINLOCK(clk_lock);
@@ -133,6 +138,13 @@ static void pmc_uckr_mode(struct clk *clk, int is_on)
{
unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
+ if (cpu_is_at91sam9g45()) {
+ if (is_on)
+ uckr |= AT91_PMC_BIASEN;
+ else
+ uckr &= ~AT91_PMC_BIASEN;
+ }
+
if (is_on) {
is_on = AT91_PMC_LOCKU;
at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
@@ -310,6 +322,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
unsigned long flags;
unsigned prescale;
unsigned long actual;
+ unsigned long prev = ULONG_MAX;
if (!clk_is_programmable(clk))
return -EINVAL;
@@ -317,8 +330,16 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
actual = clk->parent->rate_hz;
for (prescale = 0; prescale < 7; prescale++) {
- if (actual && actual <= rate)
+ if (actual > rate)
+ prev = actual;
+
+ if (actual && actual <= rate) {
+ if ((prev - rate) < (rate - actual)) {
+ actual = prev;
+ prescale--;
+ }
break;
+ }
actual >>= 1;
}
@@ -373,6 +394,10 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
return -EBUSY;
if (!clk_is_primary(parent) || !clk_is_programmable(clk))
return -EINVAL;
+
+ if (cpu_is_at91sam9rl() && parent->id == AT91_PMC_CSS_PLLB)
+ return -EINVAL;
+
spin_lock_irqsave(&clk_lock, flags);
clk->rate_hz = parent->rate_hz;
@@ -601,7 +626,9 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
uhpck.pmc_mask = AT91RM9200_PMC_UHP;
udpck.pmc_mask = AT91RM9200_PMC_UDP;
at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
- } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
+ cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
+ cpu_is_at91sam9g10()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
} else if (cpu_is_at91cap9()) {
@@ -637,6 +664,7 @@ int __init at91_clock_init(unsigned long main_clock)
{
unsigned tmp, freq, mckr;
int i;
+ int pll_overclock = false;
/*
* When the bootloader initialized the main oscillator correctly,
@@ -654,12 +682,25 @@ int __init at91_clock_init(unsigned long main_clock)
/* report if PLLA is more than mildly overclocked */
plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
- if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
- || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
+ if (cpu_has_300M_plla()) {
+ if (plla.rate_hz > 300000000)
+ pll_overclock = true;
+ } else if (cpu_has_800M_plla()) {
+ if (plla.rate_hz > 800000000)
+ pll_overclock = true;
+ } else {
+ if (plla.rate_hz > 209000000)
+ pll_overclock = true;
+ }
+ if (pll_overclock)
pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
+ if (cpu_is_at91sam9g45()) {
+ mckr = at91_sys_read(AT91_PMC_MCKR);
+ plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12)); /* plla divisor by 2 */
+ }
- if (cpu_has_upll() && !cpu_has_pllb()) {
+ if (!cpu_has_pllb() && cpu_has_upll()) {
/* setup UTMI clock as the fourth primary clock
* (instead of pllb) */
utmi_clk.type |= CLK_TYPE_PRIMARY;
@@ -701,6 +742,9 @@ int __init at91_clock_init(unsigned long main_clock)
freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
if (mckr & AT91_PMC_PDIV)
freq /= 2; /* processor clock division */
+ } else if (cpu_is_at91sam9g45()) {
+ mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
+ freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
} else {
mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
}
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index b5daf7f5e011..88e413b38480 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -14,6 +14,7 @@ extern void __init at91sam9260_initialize(unsigned long main_clock);
extern void __init at91sam9261_initialize(unsigned long main_clock);
extern void __init at91sam9263_initialize(unsigned long main_clock);
extern void __init at91sam9rl_initialize(unsigned long main_clock);
+extern void __init at91sam9g45_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
extern void __init at91cap9_initialize(unsigned long main_clock);
@@ -23,6 +24,7 @@ extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
extern void __init at91cap9_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index f2236f0e101f..ae4772e744ac 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -44,13 +44,11 @@ static int at91_gpiolib_direction_output(struct gpio_chip *chip,
unsigned offset, int val);
static int at91_gpiolib_direction_input(struct gpio_chip *chip,
unsigned offset);
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
#define AT91_GPIO_CHIP(name, base_gpio, nr_gpio) \
{ \
.chip = { \
.label = name, \
- .request = at91_gpiolib_request, \
.direction_input = at91_gpiolib_direction_input, \
.direction_output = at91_gpiolib_direction_output, \
.get = at91_gpiolib_get, \
@@ -588,19 +586,6 @@ static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
__raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
}
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
-{
- unsigned pin = chip->base + offset;
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- /* Cannot request GPIOs that are in alternate function mode */
- if (!(__raw_readl(pio + PIO_PSR) & mask))
- return -EPERM;
-
- return 0;
-}
-
static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
int i;
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 3a348ca20773..87de8be17484 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -95,6 +95,9 @@
#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */
#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */
+#define AT91SAM9G10_SRAM_BASE AT91SAM9261_SRAM_BASE /* Internal SRAM base address */
+#define AT91SAM9G10_SRAM_SIZE 0x00004000 /* Internal SRAM size (16Kb) */
+
#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */
#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
new file mode 100644
index 000000000000..a526869aee37
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -0,0 +1,155 @@
+/*
+ * Chip-specific header file for the AT91SAM9G45 family
+ *
+ * Copyright (C) 2008-2009 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_H
+#define AT91SAM9G45_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Controller Interrupt */
+#define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */
+#define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */
+#define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */
+#define AT91SAM9G45_ID_PIODE 5 /* Parallel I/O Controller D and E */
+#define AT91SAM9G45_ID_TRNG 6 /* True Random Number Generator */
+#define AT91SAM9G45_ID_US0 7 /* USART 0 */
+#define AT91SAM9G45_ID_US1 8 /* USART 1 */
+#define AT91SAM9G45_ID_US2 9 /* USART 2 */
+#define AT91SAM9G45_ID_US3 10 /* USART 3 */
+#define AT91SAM9G45_ID_MCI0 11 /* High Speed Multimedia Card Interface 0 */
+#define AT91SAM9G45_ID_TWI0 12 /* Two-Wire Interface 0 */
+#define AT91SAM9G45_ID_TWI1 13 /* Two-Wire Interface 1 */
+#define AT91SAM9G45_ID_SPI0 14 /* Serial Peripheral Interface 0 */
+#define AT91SAM9G45_ID_SPI1 15 /* Serial Peripheral Interface 1 */
+#define AT91SAM9G45_ID_SSC0 16 /* Synchronous Serial Controller 0 */
+#define AT91SAM9G45_ID_SSC1 17 /* Synchronous Serial Controller 1 */
+#define AT91SAM9G45_ID_TCB 18 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9G45_ID_PWMC 19 /* Pulse Width Modulation Controller */
+#define AT91SAM9G45_ID_TSC 20 /* Touch Screen ADC Controller */
+#define AT91SAM9G45_ID_DMA 21 /* DMA Controller */
+#define AT91SAM9G45_ID_UHPHS 22 /* USB Host High Speed */
+#define AT91SAM9G45_ID_LCDC 23 /* LCD Controller */
+#define AT91SAM9G45_ID_AC97C 24 /* AC97 Controller */
+#define AT91SAM9G45_ID_EMAC 25 /* Ethernet MAC */
+#define AT91SAM9G45_ID_ISI 26 /* Image Sensor Interface */
+#define AT91SAM9G45_ID_UDPHS 27 /* USB Device High Speed */
+#define AT91SAM9G45_ID_AESTDESSHA 28 /* AES + T-DES + SHA */
+#define AT91SAM9G45_ID_MCI1 29 /* High Speed Multimedia Card Interface 1 */
+#define AT91SAM9G45_ID_VDEC 30 /* Video Decoder */
+#define AT91SAM9G45_ID_IRQ0 31 /* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9G45_BASE_UDPHS 0xfff78000
+#define AT91SAM9G45_BASE_TCB0 0xfff7c000
+#define AT91SAM9G45_BASE_TC0 0xfff7c000
+#define AT91SAM9G45_BASE_TC1 0xfff7c040
+#define AT91SAM9G45_BASE_TC2 0xfff7c080
+#define AT91SAM9G45_BASE_MCI0 0xfff80000
+#define AT91SAM9G45_BASE_TWI0 0xfff84000
+#define AT91SAM9G45_BASE_TWI1 0xfff88000
+#define AT91SAM9G45_BASE_US0 0xfff8c000
+#define AT91SAM9G45_BASE_US1 0xfff90000
+#define AT91SAM9G45_BASE_US2 0xfff94000
+#define AT91SAM9G45_BASE_US3 0xfff98000
+#define AT91SAM9G45_BASE_SSC0 0xfff9c000
+#define AT91SAM9G45_BASE_SSC1 0xfffa0000
+#define AT91SAM9G45_BASE_SPI0 0xfffa4000
+#define AT91SAM9G45_BASE_SPI1 0xfffa8000
+#define AT91SAM9G45_BASE_AC97C 0xfffac000
+#define AT91SAM9G45_BASE_TSC 0xfffb0000
+#define AT91SAM9G45_BASE_ISI 0xfffb4000
+#define AT91SAM9G45_BASE_PWMC 0xfffb8000
+#define AT91SAM9G45_BASE_EMAC 0xfffbc000
+#define AT91SAM9G45_BASE_AES 0xfffc0000
+#define AT91SAM9G45_BASE_TDES 0xfffc4000
+#define AT91SAM9G45_BASE_SHA 0xfffc8000
+#define AT91SAM9G45_BASE_TRNG 0xfffcc000
+#define AT91SAM9G45_BASE_MCI1 0xfffd0000
+#define AT91SAM9G45_BASE_TCB1 0xfffd4000
+#define AT91SAM9G45_BASE_TC3 0xfffd4000
+#define AT91SAM9G45_BASE_TC4 0xfffd4040
+#define AT91SAM9G45_BASE_TC5 0xfffd4080
+#define AT91_BASE_SYS 0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
+#define AT91_DDRSDRC1 (0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
+#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC (0xfffffdb0 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT91SAM9G45_BASE_US0
+#define AT91_USART1 AT91SAM9G45_BASE_US1
+#define AT91_USART2 AT91SAM9G45_BASE_US2
+#define AT91_USART3 AT91SAM9G45_BASE_US3
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9G45_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9G45_SRAM_SIZE SZ_64K /* Internal SRAM size (64Kb) */
+
+#define AT91SAM9G45_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9G45_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */
+
+#define AT91SAM9G45_LCDC_BASE 0x00500000 /* LCD Controller */
+#define AT91SAM9G45_UDPHS_FIFO 0x00600000 /* USB Device HS controller */
+#define AT91SAM9G45_OHCI_BASE 0x00700000 /* USB Host controller (OHCI) */
+#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */
+#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */
+
+#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
+
+#define CONSISTENT_DMA_SIZE SZ_4M
+
+/*
+ * DMA peripheral identifiers
+ * for hardware handshaking interface
+ */
+#define AT_DMA_ID_MCI0 0
+#define AT_DMA_ID_SPI0_TX 1
+#define AT_DMA_ID_SPI0_RX 2
+#define AT_DMA_ID_SPI1_TX 3
+#define AT_DMA_ID_SPI1_RX 4
+#define AT_DMA_ID_SSC0_TX 5
+#define AT_DMA_ID_SSC0_RX 6
+#define AT_DMA_ID_SSC1_TX 7
+#define AT_DMA_ID_SSC1_RX 8
+#define AT_DMA_ID_AC97_TX 9
+#define AT_DMA_ID_AC97_RX 10
+#define AT_DMA_ID_MCI1 13
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
new file mode 100644
index 000000000000..c972d60e0aeb
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
@@ -0,0 +1,153 @@
+/*
+ * Matrix-centric header file for the AT91SAM9G45 family
+ *
+ * Copyright (C) 2008-2009 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_MATRIX_H
+#define AT91SAM9G45_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0)
+#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0)
+#define AT91_MATRIX_ULBT_128 (7 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
+#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
+#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_RCB6 (1 << 6)
+#define AT91_MATRIX_RCB7 (1 << 7)
+#define AT91_MATRIX_RCB8 (1 << 8)
+#define AT91_MATRIX_RCB9 (1 << 9)
+#define AT91_MATRIX_RCB10 (1 << 10)
+#define AT91_MATRIX_RCB11 (1 << 11)
+
+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x110) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+#define AT91_MATRIX_DTCM_64 (7 << 4)
+#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */
+#define AT91_MATRIX_TCM_NO_WS (0x0 << 11)
+#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11)
+
+#define AT91_MATRIX_VIDEO (AT91_MATRIX + 0x118) /* Video Mode Configuration Register */
+#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */
+#define AT91C_VDEC_SEL_OFF (0 << 0)
+#define AT91C_VDEC_SEL_ON (1 << 0)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x128) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4)
+#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5)
+#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
+#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
+#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
+#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
+#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
+#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
+#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
+#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
+#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
+
+#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
+#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
+#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
+#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
+#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
+#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
+#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
+#define AT91_MATRIX_WPSR_WPV (1 << 0)
+#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index e6afff849b85..13f27a4b882d 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -37,6 +37,7 @@
#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <linux/usb/atmel_usba_udc.h>
+#include <sound/atmel-ac97c.h>
/* USB Device */
struct at91_udc_data {
@@ -80,7 +81,8 @@ struct at91_eth_data {
};
extern void __init at91_add_device_eth(struct at91_eth_data *data);
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
+ || defined(CONFIG_ARCH_AT91SAM9G45)
#define eth_platform_data at91_eth_data
#endif
@@ -90,6 +92,7 @@ struct at91_usbh_data {
u8 vbus_pin[2]; /* port power-control pin */
};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
/* NAND / SmartMedia */
struct atmel_nand_data {
@@ -105,7 +108,11 @@ struct atmel_nand_data {
extern void __init at91_add_device_nand(struct atmel_nand_data *data);
/* I2C*/
+#if defined(CONFIG_ARCH_AT91SAM9G45)
+extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
+#else
extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
+#endif
/* SPI */
extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
@@ -168,10 +175,7 @@ struct atmel_lcdfb_info;
extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
/* AC97 */
-struct atmel_ac97_data {
- u8 reset_pin; /* reset */
-};
-extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
/* ISI */
extern void __init at91_add_device_isi(void);
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index c554c3e4d553..34a9502c48bc 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -21,8 +21,10 @@
#define ARCH_ID_AT91SAM9260 0x019803a0
#define ARCH_ID_AT91SAM9261 0x019703a0
#define ARCH_ID_AT91SAM9263 0x019607a0
+#define ARCH_ID_AT91SAM9G10 0x819903a0
#define ARCH_ID_AT91SAM9G20 0x019905a0
#define ARCH_ID_AT91SAM9RL64 0x019b03a0
+#define ARCH_ID_AT91SAM9G45 0x819b05a0
#define ARCH_ID_AT91CAP9 0x039A03A0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
@@ -39,6 +41,15 @@ static inline unsigned long at91_cpu_identify(void)
return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
}
+#define ARCH_EXID_AT91SAM9M11 0x00000001
+#define ARCH_EXID_AT91SAM9M10 0x00000002
+#define ARCH_EXID_AT91SAM9G45 0x00000004
+
+static inline unsigned long at91_exid_identify(void)
+{
+ return at91_sys_read(AT91_DBGU_EXID);
+}
+
#define ARCH_FAMILY_AT91X92 0x09200000
#define ARCH_FAMILY_AT91SAM9 0x01900000
@@ -87,6 +98,12 @@ static inline unsigned long at91cap9_rev_identify(void)
#define cpu_is_at91sam9261() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9G10
+#define cpu_is_at91sam9g10() (at91_cpu_identify() == ARCH_ID_AT91SAM9G10)
+#else
+#define cpu_is_at91sam9g10() (0)
+#endif
+
#ifdef CONFIG_ARCH_AT91SAM9263
#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263)
#else
@@ -99,6 +116,12 @@ static inline unsigned long at91cap9_rev_identify(void)
#define cpu_is_at91sam9rl() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9G45
+#define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
+#else
+#define cpu_is_at91sam9g45() (0)
+#endif
+
#ifdef CONFIG_ARCH_AT91CAP9
#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
#define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index da0b681c652c..a0df8b022df2 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -20,12 +20,14 @@
#include <mach/at91rm9200.h>
#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
#include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
+#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
#include <mach/at91sam9261.h>
#elif defined(CONFIG_ARCH_AT91SAM9263)
#include <mach/at91sam9263.h>
#elif defined(CONFIG_ARCH_AT91SAM9RL)
#include <mach/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9g45.h>
#elif defined(CONFIG_ARCH_AT91CAP9)
#include <mach/at91cap9.h>
#elif defined(CONFIG_ARCH_AT91X40)
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index d84c9948becf..31ac2d97f14c 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -42,6 +42,11 @@
#define AT91SAM9_MASTER_CLOCK 99300000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91SAM9G10)
+
+#define AT91SAM9_MASTER_CLOCK 133000000
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
#elif defined(CONFIG_ARCH_AT91SAM9263)
#if defined(CONFIG_MACH_USB_A9263)
@@ -62,6 +67,11 @@
#define AT91SAM9_MASTER_CLOCK 132096000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+
+#define AT91SAM9_MASTER_CLOCK 133333333
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
#elif defined(CONFIG_ARCH_AT91CAP9)
#define AT91CAP9_MASTER_CLOCK 100000000
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e26c4fe61fae..4028724d490d 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -201,7 +201,8 @@ static int at91_pm_verify_clocks(void)
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
- } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()
+ || cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) {
if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig
new file mode 100644
index 000000000000..457b4384913e
--- /dev/null
+++ b/arch/arm/mach-bcmring/Kconfig
@@ -0,0 +1,21 @@
+choice
+ prompt "Processor selection in BCMRING family of devices"
+ depends on ARCH_BCMRING
+ default ARCH_BCM11107
+
+config ARCH_FPGA11107
+ bool "FPGA11107"
+
+config ARCH_BCM11107
+ bool "BCM11107"
+endchoice
+
+menu "BCMRING Options"
+ depends on ARCH_BCMRING
+
+config BCM_ZRELADDR
+ hex "Compressed ZREL ADDR"
+
+endmenu
+
+# source "drivers/char/bcmring/Kconfig"
diff --git a/arch/arm/mach-bcmring/Makefile b/arch/arm/mach-bcmring/Makefile
new file mode 100644
index 000000000000..f8d9fcedf917
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := arch.o mm.o irq.o clock.o core.o timer.o dma.o
+obj-y += csp/
diff --git a/arch/arm/mach-bcmring/Makefile.boot b/arch/arm/mach-bcmring/Makefile.boot
new file mode 100644
index 000000000000..fb53b283bebb
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile.boot
@@ -0,0 +1,6 @@
+# Address where decompressor will be written and eventually executed.
+#
+# default to SDRAM
+zreladdr-y := $(CONFIG_BCM_ZRELADDR)
+params_phys-y := 0x00000800
+
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
new file mode 100644
index 000000000000..0da693b0f7e1
--- /dev/null
+++ b/arch/arm/mach-bcmring/arch.c
@@ -0,0 +1,157 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+#include <linux/proc_fs.h>
+#include <linux/sysctl.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+
+#include <asm/mach/arch.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <cfg_global.h>
+
+#include "core.h"
+
+HW_DECLARE_SPINLOCK(arch)
+HW_DECLARE_SPINLOCK(gpio)
+#if defined(CONFIG_DEBUG_SPINLOCK)
+ EXPORT_SYMBOL(bcmring_gpio_reg_lock);
+#endif
+
+/* FIXME: temporary solution */
+#define BCM_SYSCTL_REBOOT_WARM 1
+#define CTL_BCM_REBOOT 112
+
+/* sysctl */
+int bcmring_arch_warm_reboot; /* do a warm reboot on hard reset */
+
+static struct ctl_table_header *bcmring_sysctl_header;
+
+static struct ctl_table bcmring_sysctl_warm_reboot[] = {
+ {
+ .ctl_name = BCM_SYSCTL_REBOOT_WARM,
+ .procname = "warm",
+ .data = &bcmring_arch_warm_reboot,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec},
+ {}
+};
+
+static struct ctl_table bcmring_sysctl_reboot[] = {
+ {
+ .ctl_name = CTL_BCM_REBOOT,
+ .procname = "reboot",
+ .mode = 0555,
+ .child = bcmring_sysctl_warm_reboot},
+ {}
+};
+
+static struct platform_device nand_device = {
+ .name = "bcm-nand",
+ .id = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &nand_device,
+};
+
+/****************************************************************************
+*
+* Called from the customize_machine function in arch/arm/kernel/setup.c
+*
+* The customize_machine function is tagged as an arch_initcall
+* (see include/linux/init.h for the order that the various init sections
+* are called in.
+*
+*****************************************************************************/
+static void __init bcmring_init_machine(void)
+{
+
+ bcmring_sysctl_header = register_sysctl_table(bcmring_sysctl_reboot);
+
+ /* Enable spread spectrum */
+ chipcHw_enableSpreadSpectrum();
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ bcmring_amba_init();
+
+ dma_init();
+}
+
+/****************************************************************************
+*
+* Called from setup_arch (in arch/arm/kernel/setup.c) to fixup any tags
+* passed in by the boot loader.
+*
+*****************************************************************************/
+
+static void __init bcmring_fixup(struct machine_desc *desc,
+ struct tag *t, char **cmdline, struct meminfo *mi) {
+#ifdef CONFIG_BLK_DEV_INITRD
+ printk(KERN_NOTICE "bcmring_fixup\n");
+ t->hdr.tag = ATAG_CORE;
+ t->hdr.size = tag_size(tag_core);
+ t->u.core.flags = 0;
+ t->u.core.pagesize = PAGE_SIZE;
+ t->u.core.rootdev = 31 << 8 | 0;
+ t = tag_next(t);
+
+ t->hdr.tag = ATAG_MEM;
+ t->hdr.size = tag_size(tag_mem32);
+ t->u.mem.start = CFG_GLOBAL_RAM_BASE;
+ t->u.mem.size = CFG_GLOBAL_RAM_SIZE;
+
+ t = tag_next(t);
+
+ t->hdr.tag = ATAG_NONE;
+ t->hdr.size = 0;
+#endif
+}
+
+/****************************************************************************
+*
+* Machine Description
+*
+*****************************************************************************/
+
+MACHINE_START(BCMRING, "BCMRING")
+ /* Maintainer: Broadcom Corporation */
+ .phys_io = MM_IO_START,
+ .io_pg_offst = (MM_IO_BASE >> 18) & 0xfffc,
+ .fixup = bcmring_fixup,
+ .map_io = bcmring_map_io,
+ .init_irq = bcmring_init_irq,
+ .timer = &bcmring_timer,
+ .init_machine = bcmring_init_machine
+MACHINE_END
diff --git a/arch/arm/mach-bcmring/clock.c b/arch/arm/mach-bcmring/clock.c
new file mode 100644
index 000000000000..14bafc38f2dc
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.c
@@ -0,0 +1,224 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <mach/csp/hw_cfg.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <asm/clkdev.h>
+
+#include "clock.h"
+
+#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY)
+#define clk_is_pll1(x) ((x)->type & CLK_TYPE_PLL1)
+#define clk_is_pll2(x) ((x)->type & CLK_TYPE_PLL2)
+#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE)
+#define clk_is_bypassable(x) ((x)->type & CLK_TYPE_BYPASSABLE)
+
+#define clk_is_using_xtal(x) ((x)->mode & CLK_MODE_XTAL)
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+ if (!clk)
+ return;
+
+ /* enable parent clock first */
+ if (clk->parent)
+ __clk_enable(clk->parent);
+
+ if (clk->use_cnt++ == 0) {
+ if (clk_is_pll1(clk)) { /* PLL1 */
+ chipcHw_pll1Enable(clk->rate_hz, 0);
+ } else if (clk_is_pll2(clk)) { /* PLL2 */
+ chipcHw_pll2Enable(clk->rate_hz);
+ } else if (clk_is_using_xtal(clk)) { /* source is crystal */
+ if (!clk_is_primary(clk))
+ chipcHw_bypassClockEnable(clk->csp_id);
+ } else { /* source is PLL */
+ chipcHw_setClockEnable(clk->csp_id);
+ }
+ }
+}
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (!clk)
+ return -EINVAL;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void __clk_disable(struct clk *clk)
+{
+ if (!clk)
+ return;
+
+ BUG_ON(clk->use_cnt == 0);
+
+ if (--clk->use_cnt == 0) {
+ if (clk_is_pll1(clk)) { /* PLL1 */
+ chipcHw_pll1Disable();
+ } else if (clk_is_pll2(clk)) { /* PLL2 */
+ chipcHw_pll2Disable();
+ } else if (clk_is_using_xtal(clk)) { /* source is crystal */
+ if (!clk_is_primary(clk))
+ chipcHw_bypassClockDisable(clk->csp_id);
+ } else { /* source is PLL */
+ chipcHw_setClockDisable(clk->csp_id);
+ }
+ }
+
+ if (clk->parent)
+ __clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (!clk)
+ return;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (!clk)
+ return 0;
+
+ return clk->rate_hz;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ unsigned long actual;
+ unsigned long rate_hz;
+
+ if (!clk)
+ return -EINVAL;
+
+ if (!clk_is_programmable(clk))
+ return -EINVAL;
+
+ if (clk->use_cnt)
+ return -EBUSY;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ actual = clk->parent->rate_hz;
+ rate_hz = min(actual, rate);
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return rate_hz;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ unsigned long actual;
+ unsigned long rate_hz;
+
+ if (!clk)
+ return -EINVAL;
+
+ if (!clk_is_programmable(clk))
+ return -EINVAL;
+
+ if (clk->use_cnt)
+ return -EBUSY;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ actual = clk->parent->rate_hz;
+ rate_hz = min(actual, rate);
+ rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz);
+ clk->rate_hz = rate_hz;
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ if (!clk)
+ return NULL;
+
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ unsigned long flags;
+ struct clk *old_parent;
+
+ if (!clk || !parent)
+ return -EINVAL;
+
+ if (!clk_is_primary(parent) || !clk_is_bypassable(clk))
+ return -EINVAL;
+
+ /* if more than one user, parent is not allowed */
+ if (clk->use_cnt > 1)
+ return -EBUSY;
+
+ if (clk->parent == parent)
+ return 0;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ old_parent = clk->parent;
+ clk->parent = parent;
+ if (clk_is_using_xtal(parent))
+ clk->mode |= CLK_MODE_XTAL;
+ else
+ clk->mode &= (~CLK_MODE_XTAL);
+
+ /* if clock is active */
+ if (clk->use_cnt != 0) {
+ clk->use_cnt--;
+ /* enable clock with the new parent */
+ __clk_enable(clk);
+ /* disable the old parent */
+ __clk_disable(old_parent);
+ }
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
diff --git a/arch/arm/mach-bcmring/clock.h b/arch/arm/mach-bcmring/clock.h
new file mode 100644
index 000000000000..5e0b98138973
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/chipcHw_def.h>
+
+#define CLK_TYPE_PRIMARY 1 /* primary clock must NOT have a parent */
+#define CLK_TYPE_PLL1 2 /* PPL1 */
+#define CLK_TYPE_PLL2 4 /* PPL2 */
+#define CLK_TYPE_PROGRAMMABLE 8 /* programmable clock rate */
+#define CLK_TYPE_BYPASSABLE 16 /* parent can be changed */
+
+#define CLK_MODE_XTAL 1 /* clock source is from crystal */
+
+struct clk {
+ const char *name; /* clock name */
+ unsigned int type; /* clock type */
+ unsigned int mode; /* current mode */
+ volatile int use_bypass; /* indicate if it's in bypass mode */
+ chipcHw_CLOCK_e csp_id; /* clock ID for CSP CHIPC */
+ unsigned long rate_hz; /* clock rate in Hz */
+ unsigned int use_cnt; /* usage count */
+ struct clk *parent; /* parent clock */
+};
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
new file mode 100644
index 000000000000..492c649f451e
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.c
@@ -0,0 +1,367 @@
+/*
+ * derived from linux/arch/arm/mach-versatile/core.c
+ * linux/arch/arm/mach-bcmring/core.c
+ *
+ * Copyright (C) 1999 - 2003 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* Portions copyright Broadcom 2008 */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+
+#include <linux/amba/bus.h>
+#include <mach/csp/mm_addr.h>
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+
+#include <cfg_global.h>
+
+#include "clock.h"
+
+#include <csp/secHw.h>
+#include <mach/csp/secHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define AMBA_DEVICE(name, initname, base, plat, size) \
+static struct amba_device name##_device = { \
+ .dev = { \
+ .coherent_dma_mask = ~0, \
+ .init_name = initname, \
+ .platform_data = plat \
+ }, \
+ .res = { \
+ .start = MM_ADDR_IO_##base, \
+ .end = MM_ADDR_IO_##base + (size) - 1, \
+ .flags = IORESOURCE_MEM \
+ }, \
+ .dma_mask = ~0, \
+ .irq = { \
+ IRQ_##base \
+ } \
+}
+
+
+AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
+AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+
+static struct clk pll1_clk = {
+ .name = "PLL1",
+ .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
+ .rate_hz = 2000000000,
+ .use_cnt = 7,
+};
+
+static struct clk uart_clk = {
+ .name = "UART",
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .csp_id = chipcHw_CLOCK_UART,
+ .rate_hz = HW_CFG_UART_CLK_HZ,
+ .parent = &pll1_clk,
+};
+
+static struct clk_lookup lookups[] = {
+ { /* UART0 */
+ .dev_id = "uarta",
+ .clk = &uart_clk,
+ }, { /* UART1 */
+ .dev_id = "uartb",
+ .clk = &uart_clk,
+ }
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+ &uartA_device,
+ &uartB_device,
+};
+
+void __init bcmring_amba_init(void)
+{
+ int i;
+ u32 bus_clock;
+
+/* Linux is run initially in non-secure mode. Secure peripherals */
+/* generate FIQ, and must be handled in secure mode. Until we have */
+/* a linux security monitor implementation, keep everything in */
+/* non-secure mode. */
+ chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
+ secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
+ secHw_BLK_MASK_KEY_SCAN |
+ secHw_BLK_MASK_TOUCH_SCREEN |
+ secHw_BLK_MASK_UART0 |
+ secHw_BLK_MASK_UART1 |
+ secHw_BLK_MASK_WATCHDOG |
+ secHw_BLK_MASK_SPUM |
+ secHw_BLK_MASK_DDR2 |
+ secHw_BLK_MASK_SPU |
+ secHw_BLK_MASK_PKA |
+ secHw_BLK_MASK_RNG |
+ secHw_BLK_MASK_RTC |
+ secHw_BLK_MASK_OTP |
+ secHw_BLK_MASK_BOOT |
+ secHw_BLK_MASK_MPU |
+ secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
+
+ /* Only the devices attached to the AMBA bus are enabled just before the bus is */
+ /* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
+ /* driver to access these blocks. The bus is probed, and the drivers are loaded. */
+ /* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
+ bus_clock = chipcHw_REG_BUS_CLOCK_GE
+ | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
+
+ chipcHw_busInterfaceClockEnable(bus_clock);
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+}
+
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE MM_IO_BASE_TMR
+#define TIMER1_VA_BASE (MM_IO_BASE_TMR + 0x20)
+#define TIMER2_VA_BASE (MM_IO_BASE_TMR + 0x40)
+#define TIMER3_VA_BASE (MM_IO_BASE_TMR + 0x60)
+
+/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically 150-166 MHz */
+#if defined(CONFIG_ARCH_FPGA11107)
+/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
+/* slow down Linux's sense of time */
+#define TIMER0_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER1_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_MHZ (tmrHw_HIGH_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
+#else
+#define TIMER0_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER1_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_MHZ tmrHw_HIGH_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000)
+#endif
+
+#define TICKS_PER_uSEC TIMER0_FREQUENCY_MHZ
+
+/*
+ * These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1 1000
+#define mSEC_5 (mSEC_1 * 5)
+#define mSEC_10 (mSEC_1 * 10)
+#define mSEC_25 (mSEC_1 * 25)
+#define SEC_1 (mSEC_1 * 1000)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TIMER_RELOAD (TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR (TIMER_CTRL_DIV256)
+#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */
+#define TIMER_DIVISOR (TIMER_CTRL_DIV16)
+#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
+#else
+#define TIMER_RELOAD (TIMER_INTERVAL)
+#define TIMER_DIVISOR (TIMER_CTRL_DIV1)
+#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
+#endif
+
+static void timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ unsigned long ctrl;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+
+ ctrl = TIMER_CTRL_PERIODIC;
+ ctrl |=
+ TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE |
+ TIMER_CTRL_ENABLE;
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* period set, and timer enabled in 'next_event' hook */
+ ctrl = TIMER_CTRL_ONESHOT;
+ ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE;
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ ctrl = 0;
+ }
+
+ writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
+}
+
+static int timer_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
+
+ writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
+ writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
+
+ return 0;
+}
+
+static struct clock_event_device timer0_clockevent = {
+ .name = "timer0",
+ .shift = 32,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = timer_set_mode,
+ .set_next_event = timer_set_next_event,
+};
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &timer0_clockevent;
+
+ writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction bcmring_timer_irq = {
+ .name = "bcmring Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = bcmring_timer_interrupt,
+};
+
+static cycle_t bcmring_get_cycles_timer1(void)
+{
+ return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
+}
+
+static cycle_t bcmring_get_cycles_timer3(void)
+{
+ return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
+}
+
+static struct clocksource clocksource_bcmring_timer1 = {
+ .name = "timer1",
+ .rating = 200,
+ .read = bcmring_get_cycles_timer1,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct clocksource clocksource_bcmring_timer3 = {
+ .name = "timer3",
+ .rating = 100,
+ .read = bcmring_get_cycles_timer3,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init bcmring_clocksource_init(void)
+{
+ /* setup timer1 as free-running clocksource */
+ writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+ writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD);
+ writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE);
+ writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+ TIMER1_VA_BASE + TIMER_CTRL);
+
+ clocksource_bcmring_timer1.mult =
+ clocksource_khz2mult(TIMER1_FREQUENCY_MHZ * 1000,
+ clocksource_bcmring_timer1.shift);
+ clocksource_register(&clocksource_bcmring_timer1);
+
+ /* setup timer3 as free-running clocksource */
+ writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+ writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
+ writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
+ writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+ TIMER3_VA_BASE + TIMER_CTRL);
+
+ clocksource_bcmring_timer3.mult =
+ clocksource_khz2mult(TIMER3_FREQUENCY_KHZ,
+ clocksource_bcmring_timer3.shift);
+ clocksource_register(&clocksource_bcmring_timer3);
+
+ return 0;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init bcmring_init_timer(void)
+{
+ printk(KERN_INFO "bcmring_init_timer\n");
+ /*
+ * Initialise to a known state (all timers off)
+ */
+ writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+ /*
+ * Make irqs happen for the system timer
+ */
+ setup_irq(IRQ_TIMER0, &bcmring_timer_irq);
+
+ bcmring_clocksource_init();
+
+ timer0_clockevent.mult =
+ div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
+ timer0_clockevent.max_delta_ns =
+ clockevent_delta2ns(0xffffffff, &timer0_clockevent);
+ timer0_clockevent.min_delta_ns =
+ clockevent_delta2ns(0xf, &timer0_clockevent);
+
+ timer0_clockevent.cpumask = cpumask_of(0);
+ clockevents_register_device(&timer0_clockevent);
+}
+
+struct sys_timer bcmring_timer = {
+ .init = bcmring_init_timer,
+};
diff --git a/arch/arm/mach-bcmring/core.h b/arch/arm/mach-bcmring/core.h
new file mode 100644
index 000000000000..b197ba48e36e
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.h
@@ -0,0 +1,30 @@
+/*
+ * linux/arch/arm/mach-versatile/core.h
+ *
+ * Copyright (C) 2004 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* Portions copyright Broadcom 2008 */
+#ifndef __ASM_ARCH_BCMRING_H
+#define __ASM_ARCH_BCMRING_H
+
+void __init bcmring_amba_init(void);
+void __init bcmring_map_io(void);
+void __init bcmring_init_irq(void);
+
+extern struct sys_timer bcmring_timer;
+#endif
diff --git a/arch/arm/mach-bcmring/csp/Makefile b/arch/arm/mach-bcmring/csp/Makefile
new file mode 100644
index 000000000000..648c0377530e
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/Makefile
@@ -0,0 +1,3 @@
+obj-y += dmac/
+obj-y += tmr/
+obj-y += chipc/
diff --git a/arch/arm/mach-bcmring/csp/chipc/Makefile b/arch/arm/mach-bcmring/csp/chipc/Makefile
new file mode 100644
index 000000000000..673952768ee5
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/Makefile
@@ -0,0 +1 @@
+obj-y += chipcHw.o chipcHw_str.o chipcHw_reset.o chipcHw_init.o
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
new file mode 100644
index 000000000000..b3a61d860c65
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
@@ -0,0 +1,776 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file chipcHw.c
+*
+* @brief Low level Various CHIP clock controlling routines
+*
+* @note
+*
+* These routines provide basic clock controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+/* VPM alignment algorithm uses this */
+#define MAX_PHASE_ADJUST_COUNT 0xFFFF /* Max number of times allowed to adjust the phase */
+#define MAX_PHASE_ALIGN_ATTEMPTS 10 /* Max number of attempt to align the phase */
+
+/* Local definition of clock type */
+#define PLL_CLOCK 1 /* PLL Clock */
+#define NON_PLL_CLOCK 2 /* Divider clock */
+
+static int chipcHw_divide(int num, int denom)
+ __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Set clock fequency for miscellaneous configurable clocks
+*
+* This function sets clock frequency
+*
+* @return Configured clock frequency in hertz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ ) {
+ volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+ volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+ volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+ uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */
+ uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */
+ uint32_t dependentClockType = 0;
+ uint32_t vcoHz = 0;
+
+ /* Get VCO frequencies */
+ if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+ uint64_t adjustFreq = 0;
+
+ vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+ /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+ adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+ (uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+ vcoFreqPll1Hz += (uint32_t) adjustFreq;
+ } else {
+ vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+ }
+ vcoFreqPll2Hz =
+ chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+ switch (clock) {
+ case chipcHw_CLOCK_DDR:
+ pPLLReg = &pChipcHw->DDRClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ARM:
+ pPLLReg = &pChipcHw->ARMClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ESW:
+ pPLLReg = &pChipcHw->ESWClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_VPM:
+ pPLLReg = &pChipcHw->VPMClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ESW125:
+ pPLLReg = &pChipcHw->ESW125Clock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_UART:
+ pPLLReg = &pChipcHw->UARTClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SDIO0:
+ pPLLReg = &pChipcHw->SDIO0Clock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SDIO1:
+ pPLLReg = &pChipcHw->SDIO1Clock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SPI:
+ pPLLReg = &pChipcHw->SPIClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ETM:
+ pPLLReg = &pChipcHw->ETMClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_USB:
+ pPLLReg = &pChipcHw->USBClock;
+ vcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_LCD:
+ pPLLReg = &pChipcHw->LCDClock;
+ vcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_APM:
+ pPLLReg = &pChipcHw->APMClock;
+ vcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_BUS:
+ pClockCtrl = &pChipcHw->ACLKClock;
+ pDependentClock = &pChipcHw->ARMClock;
+ vcoHz = vcoFreqPll1Hz;
+ dependentClockType = PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_OTP:
+ pClockCtrl = &pChipcHw->OTPClock;
+ break;
+ case chipcHw_CLOCK_I2C:
+ pClockCtrl = &pChipcHw->I2CClock;
+ break;
+ case chipcHw_CLOCK_I2S0:
+ pClockCtrl = &pChipcHw->I2S0Clock;
+ break;
+ case chipcHw_CLOCK_RTBUS:
+ pClockCtrl = &pChipcHw->RTBUSClock;
+ pDependentClock = &pChipcHw->ACLKClock;
+ dependentClockType = NON_PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_APM100:
+ pClockCtrl = &pChipcHw->APM100Clock;
+ pDependentClock = &pChipcHw->APMClock;
+ vcoHz = vcoFreqPll2Hz;
+ dependentClockType = PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_TSC:
+ pClockCtrl = &pChipcHw->TSCClock;
+ break;
+ case chipcHw_CLOCK_LED:
+ pClockCtrl = &pChipcHw->LEDClock;
+ break;
+ case chipcHw_CLOCK_I2S1:
+ pClockCtrl = &pChipcHw->I2S1Clock;
+ break;
+ }
+
+ if (pPLLReg) {
+ /* Obtain PLL clock frequency */
+ if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+ /* Return crystal clock frequency when bypassed */
+ return chipcHw_XTAL_FREQ_Hz;
+ } else if (clock == chipcHw_CLOCK_DDR) {
+ /* DDR frequency is configured in PLLDivider register */
+ return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+ } else {
+ /* From chip revision number B0, LCD clock is internally divided by 2 */
+ if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+ vcoHz >>= 1;
+ }
+ /* Obtain PLL clock frequency using VCO dividers */
+ return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+ }
+ } else if (pClockCtrl) {
+ /* Obtain divider clock frequency */
+ uint32_t div;
+ uint32_t freq = 0;
+
+ if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+ /* Return crystal clock frequency when bypassed */
+ return chipcHw_XTAL_FREQ_Hz;
+ } else if (pDependentClock) {
+ /* Identify the dependent clock frequency */
+ switch (dependentClockType) {
+ case PLL_CLOCK:
+ if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+ /* Use crystal clock frequency when dependent PLL clock is bypassed */
+ freq = chipcHw_XTAL_FREQ_Hz;
+ } else {
+ /* Obtain PLL clock frequency using VCO dividers */
+ div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
+ freq = div ? chipcHw_divide(vcoHz, div) : 0;
+ }
+ break;
+ case NON_PLL_CLOCK:
+ if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+ freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+ } else {
+ if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+ /* Use crystal clock frequency when dependent divider clock is bypassed */
+ freq = chipcHw_XTAL_FREQ_Hz;
+ } else {
+ /* Obtain divider clock frequency using XTAL dividers */
+ div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+ freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256));
+ }
+ }
+ break;
+ }
+ } else {
+ /* Dependent on crystal clock */
+ freq = chipcHw_XTAL_FREQ_Hz;
+ }
+
+ div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+ return chipcHw_divide(freq, (div ? div : 256));
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Set clock fequency for miscellaneous configurable clocks
+*
+* This function sets clock frequency
+*
+* @return Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */
+ uint32_t freq /* [ IN ] Clock frequency in Hz */
+ ) {
+ volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+ volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+ volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+ uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */
+ uint32_t desVcoFreqPll1Hz = 0; /* Desired VCO frequency for PLL1 in Hz */
+ uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */
+ uint32_t dependentClockType = 0;
+ uint32_t vcoHz = 0;
+ uint32_t desVcoHz = 0;
+
+ /* Get VCO frequencies */
+ if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+ uint64_t adjustFreq = 0;
+
+ vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+ /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+ adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+ (uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+ vcoFreqPll1Hz += (uint32_t) adjustFreq;
+
+ /* Desired VCO frequency */
+ desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1);
+ } else {
+ vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+ }
+ vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+ switch (clock) {
+ case chipcHw_CLOCK_DDR:
+ /* Configure the DDR_ctrl:BUS ratio settings */
+ {
+ REG_LOCAL_IRQ_SAVE;
+ /* Dvide DDR_phy by two to obtain DDR_ctrl clock */
+ pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+ << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+ REG_LOCAL_IRQ_RESTORE;
+ }
+ pPLLReg = &pChipcHw->DDRClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ARM:
+ pPLLReg = &pChipcHw->ARMClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ESW:
+ pPLLReg = &pChipcHw->ESWClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_VPM:
+ /* Configure the VPM:BUS ratio settings */
+ {
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+ << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+ REG_LOCAL_IRQ_RESTORE;
+ }
+ pPLLReg = &pChipcHw->VPMClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ESW125:
+ pPLLReg = &pChipcHw->ESW125Clock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_UART:
+ pPLLReg = &pChipcHw->UARTClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SDIO0:
+ pPLLReg = &pChipcHw->SDIO0Clock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SDIO1:
+ pPLLReg = &pChipcHw->SDIO1Clock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SPI:
+ pPLLReg = &pChipcHw->SPIClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ETM:
+ pPLLReg = &pChipcHw->ETMClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_USB:
+ pPLLReg = &pChipcHw->USBClock;
+ vcoHz = vcoFreqPll2Hz;
+ desVcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_LCD:
+ pPLLReg = &pChipcHw->LCDClock;
+ vcoHz = vcoFreqPll2Hz;
+ desVcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_APM:
+ pPLLReg = &pChipcHw->APMClock;
+ vcoHz = vcoFreqPll2Hz;
+ desVcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_BUS:
+ pClockCtrl = &pChipcHw->ACLKClock;
+ pDependentClock = &pChipcHw->ARMClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ dependentClockType = PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_OTP:
+ pClockCtrl = &pChipcHw->OTPClock;
+ break;
+ case chipcHw_CLOCK_I2C:
+ pClockCtrl = &pChipcHw->I2CClock;
+ break;
+ case chipcHw_CLOCK_I2S0:
+ pClockCtrl = &pChipcHw->I2S0Clock;
+ break;
+ case chipcHw_CLOCK_RTBUS:
+ pClockCtrl = &pChipcHw->RTBUSClock;
+ pDependentClock = &pChipcHw->ACLKClock;
+ dependentClockType = NON_PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_APM100:
+ pClockCtrl = &pChipcHw->APM100Clock;
+ pDependentClock = &pChipcHw->APMClock;
+ vcoHz = vcoFreqPll2Hz;
+ desVcoHz = vcoFreqPll2Hz;
+ dependentClockType = PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_TSC:
+ pClockCtrl = &pChipcHw->TSCClock;
+ break;
+ case chipcHw_CLOCK_LED:
+ pClockCtrl = &pChipcHw->LEDClock;
+ break;
+ case chipcHw_CLOCK_I2S1:
+ pClockCtrl = &pChipcHw->I2S1Clock;
+ break;
+ }
+
+ if (pPLLReg) {
+ /* Select XTAL as bypass source */
+ reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_SOURCE_GPIO);
+ reg32_modify_or(pPLLReg, chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+ /* For DDR settings use only the PLL divider clock */
+ if (pPLLReg == &pChipcHw->DDRClock) {
+ /* Set M1DIV for PLL1, which controls the DDR clock */
+ reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
+ /* Calculate expected frequency */
+ freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+ } else {
+ /* From chip revision number B0, LCD clock is internally divided by 2 */
+ if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+ desVcoHz >>= 1;
+ vcoHz >>= 1;
+ }
+ /* Set MDIV to change the frequency */
+ reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK));
+ reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq));
+ /* Calculate expected frequency */
+ freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+ }
+ /* Wait for for atleast 200ns as per the protocol to change frequency */
+ udelay(1);
+ /* Do not bypass */
+ reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+ /* Return the configured frequency */
+ return freq;
+ } else if (pClockCtrl) {
+ uint32_t divider = 0;
+
+ /* Divider clock should not be bypassed */
+ reg32_modify_and(pClockCtrl,
+ ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+
+ /* Identify the clock source */
+ if (pDependentClock) {
+ switch (dependentClockType) {
+ case PLL_CLOCK:
+ divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
+ break;
+ case NON_PLL_CLOCK:
+ {
+ uint32_t sourceClock = 0;
+
+ if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+ sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+ } else {
+ uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+ sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256));
+ }
+ divider = chipcHw_divide(sourceClock, freq);
+ }
+ break;
+ }
+ } else {
+ divider = chipcHw_divide(chipcHw_XTAL_FREQ_Hz, freq);
+ }
+
+ if (divider) {
+ REG_LOCAL_IRQ_SAVE;
+ /* Set the divider to obtain the required frequency */
+ *pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK);
+ REG_LOCAL_IRQ_RESTORE;
+ return freq;
+ }
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL(chipcHw_setClockFrequency);
+
+/****************************************************************************/
+/**
+* @brief Set VPM clock in sync with BUS clock for Chip Rev #A0
+*
+* This function does the phase adjustment between VPM and BUS clock
+*
+* @return >= 0 : On success (# of adjustment required)
+* -1 : On failure
+*
+*/
+/****************************************************************************/
+static int vpmPhaseAlignA0(void)
+{
+ uint32_t phaseControl;
+ uint32_t phaseValue;
+ uint32_t prevPhaseComp;
+ int iter = 0;
+ int adjustCount = 0;
+ int count = 0;
+
+ for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) {
+ phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
+ phaseValue = 0;
+ prevPhaseComp = 0;
+
+ /* Step 1: Look for falling PH_COMP transition */
+
+ /* Read the contents of VPM Clock resgister */
+ phaseValue = pChipcHw->VPMClock;
+ do {
+ /* Store previous value of phase comparator */
+ prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP;
+ /* Change the value of PH_CTRL. */
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ /* Read the contents of VPM Clock resgister. */
+ phaseValue = pChipcHw->VPMClock;
+
+ if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+ phaseControl = (0x3F & (phaseControl - 1));
+ } else {
+ /* Increment to the Phase count value for next write, if Phase is not stable. */
+ phaseControl = (0x3F & (phaseControl + 1));
+ }
+ /* Count number of adjustment made */
+ adjustCount++;
+ } while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || /* Look for a transition */
+ ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && /* Look for a falling edge */
+ (adjustCount < MAX_PHASE_ADJUST_COUNT) /* Do not exceed the limit while trying */
+ );
+
+ if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+ /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+ return -1;
+ }
+
+ /* Step 2: Keep moving forward to make sure falling PH_COMP transition was valid */
+
+ for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+ phaseControl = (0x3F & (phaseControl + 1));
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ phaseValue = pChipcHw->VPMClock;
+ /* Count number of adjustment made */
+ adjustCount++;
+ }
+
+ if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+ /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+ return -1;
+ }
+
+ if (count != 5) {
+ /* Detected false transition */
+ continue;
+ }
+
+ /* Step 3: Keep moving backward to make sure falling PH_COMP transition was stable */
+
+ for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+ phaseControl = (0x3F & (phaseControl - 1));
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ phaseValue = pChipcHw->VPMClock;
+ /* Count number of adjustment made */
+ adjustCount++;
+ }
+
+ if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+ /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+ return -1;
+ }
+
+ if (count != 3) {
+ /* Detected noisy transition */
+ continue;
+ }
+
+ /* Step 4: Keep moving backward before the original transition took place. */
+
+ for (count = 0; (count < 5); count++) {
+ phaseControl = (0x3F & (phaseControl - 1));
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ phaseValue = pChipcHw->VPMClock;
+ /* Count number of adjustment made */
+ adjustCount++;
+ }
+
+ if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+ /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+ return -1;
+ }
+
+ if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0) {
+ /* Detected false transition */
+ continue;
+ }
+
+ /* Step 5: Re discover the valid transition */
+
+ do {
+ /* Store previous value of phase comparator */
+ prevPhaseComp = phaseValue;
+ /* Change the value of PH_CTRL. */
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^=
+ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ /* Read the contents of VPM Clock resgister. */
+ phaseValue = pChipcHw->VPMClock;
+
+ if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+ phaseControl = (0x3F & (phaseControl - 1));
+ } else {
+ /* Increment to the Phase count value for next write, if Phase is not stable. */
+ phaseControl = (0x3F & (phaseControl + 1));
+ }
+
+ /* Count number of adjustment made */
+ adjustCount++;
+ } while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && (adjustCount < MAX_PHASE_ADJUST_COUNT));
+
+ if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+ /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+ return -1;
+ } else {
+ /* Valid phase must have detected */
+ break;
+ }
+ }
+
+ /* For VPM Phase should be perfectly aligned. */
+ phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
+ {
+ REG_LOCAL_IRQ_SAVE;
+
+ pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT);
+ /* Load new phase value */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+
+ REG_LOCAL_IRQ_RESTORE;
+ }
+ /* Return the status */
+ return (int)adjustCount;
+}
+
+/****************************************************************************/
+/**
+* @brief Set VPM clock in sync with BUS clock
+*
+* This function does the phase adjustment between VPM and BUS clock
+*
+* @return >= 0 : On success (# of adjustment required)
+* -1 : On failure
+*
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void)
+{
+
+ if (chipcHw_getChipRevisionNumber() == chipcHw_REV_NUMBER_A0) {
+ return vpmPhaseAlignA0();
+ } else {
+ uint32_t phaseControl = chipcHw_getVpmPhaseControl();
+ uint32_t phaseValue = 0;
+ int adjustCount = 0;
+
+ /* Disable VPM access */
+ pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+ /* Disable HW VPM phase alignment */
+ chipcHw_vpmHwPhaseAlignDisable();
+ /* Enable SW VPM phase alignment */
+ chipcHw_vpmSwPhaseAlignEnable();
+ /* Adjust VPM phase */
+ while (adjustCount < MAX_PHASE_ADJUST_COUNT) {
+ phaseValue = chipcHw_getVpmHwPhaseAlignStatus();
+
+ /* Adjust phase control value */
+ if (phaseValue > 0xF) {
+ /* Increment phase control value */
+ phaseControl++;
+ } else if (phaseValue < 0xF) {
+ /* Decrement phase control value */
+ phaseControl--;
+ } else {
+ /* Enable VPM access */
+ pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+ /* Return adjust count */
+ return adjustCount;
+ }
+ /* Change the value of PH_CTRL. */
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ /* Count adjustment */
+ adjustCount++;
+ }
+ }
+
+ /* Disable VPM access */
+ pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+ return -1;
+}
+
+/****************************************************************************/
+/**
+* @brief Local Divide function
+*
+* This function does the divide
+*
+* @return divide value
+*
+*/
+/****************************************************************************/
+static int chipcHw_divide(int num, int denom)
+{
+ int r;
+ int t = 1;
+
+ /* Shift denom and t up to the largest value to optimize algorithm */
+ /* t contains the units of each divide */
+ while ((denom & 0x40000000) == 0) { /* fails if denom=0 */
+ denom = denom << 1;
+ t = t << 1;
+ }
+
+ /* Intialize the result */
+ r = 0;
+
+ do {
+ /* Determine if there exists a positive remainder */
+ if ((num - denom) >= 0) {
+ /* Accumlate t to the result and calculate a new remainder */
+ num = num - denom;
+ r = r + t;
+ }
+ /* Continue to shift denom and shift t down to 0 */
+ denom = denom >> 1;
+ t = t >> 1;
+ } while (t != 0);
+
+ return r;
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
new file mode 100644
index 000000000000..367df75d4bb3
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
@@ -0,0 +1,293 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file chipcHw_init.c
+*
+* @brief Low level CHIPC PLL configuration functions
+*
+* @note
+*
+* These routines provide basic PLL controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+/* ---- Private Constants and Types --------------------------------------- */
+
+/*
+ Calculation for NDIV_i to obtain VCO frequency
+ -----------------------------------------------
+
+ Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
+ for Freq_vco = VCO_FREQ_MHz
+ Freq_ref = chipcHw_XTAL_FREQ_Hz
+ PLL_P1 = PLL_P2 = 1
+ and
+ PLL_NDIV_f = 0
+
+ We get:
+ PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz
+
+ Calculation for PLL MDIV to obtain frequency Freq_x for channel x
+ -----------------------------------------------------------------
+ Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x
+
+ PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
+*/
+
+/* ---- Private Variables ------------------------------------------------- */
+/****************************************************************************/
+/**
+* @brief Initializes the PLL2
+*
+* This function initializes the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz)
+{
+ uint32_t pllPreDivider2 = 0;
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig2 =
+ chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET;
+
+ pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+ (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+ chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+ chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+
+ /* Enable CHIPC registers to control the PLL */
+ pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+ /* Set pre divider to get desired VCO frequency */
+ pChipcHw->PLLPreDivider2 = pllPreDivider2;
+ /* Set NDIV Frac */
+ pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;
+
+ /* This has to be removed once the default values are fixed for PLL2. */
+ pChipcHw->PLLControl12 = 0x38000700;
+ pChipcHw->PLLControl22 = 0x00000015;
+
+ /* Reset PLL2 */
+ if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+ pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ } else {
+ pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ }
+ REG_LOCAL_IRQ_RESTORE;
+ }
+
+ /* Insert certain amount of delay before deasserting ARESET. */
+ udelay(1);
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+ /* Remove analog reset and Power on the PLL */
+ pChipcHw->PLLConfig2 &=
+ ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+
+ REG_LOCAL_IRQ_RESTORE;
+
+ }
+
+ /* Wait until PLL is locked */
+ while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+ ;
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+ /* Remove digital reset */
+ pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+
+ REG_LOCAL_IRQ_RESTORE;
+ }
+}
+
+EXPORT_SYMBOL(chipcHw_pll2Enable);
+
+/****************************************************************************/
+/**
+* @brief Initializes the PLL1
+*
+* This function initializes the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
+{
+ uint32_t pllPreDivider = 0;
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+
+ pChipcHw->PLLConfig =
+ chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET;
+ /* Setting VCO frequency */
+ if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+ pllPreDivider =
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 |
+ ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
+ 1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+ chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+ chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+ } else {
+ pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+ (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+ chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+ chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+ }
+
+ /* Enable CHIPC registers to control the PLL */
+ pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+ /* Set pre divider to get desired VCO frequency */
+ pChipcHw->PLLPreDivider = pllPreDivider;
+ /* Set NDIV Frac */
+ if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+ pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+ chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
+ } else {
+ pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+ chipcHw_REG_PLL_DIVIDER_NDIV_f;
+ }
+
+ /* Reset PLL1 */
+ if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+ pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ } else {
+ pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ }
+
+ REG_LOCAL_IRQ_RESTORE;
+
+ /* Insert certain amount of delay before deasserting ARESET. */
+ udelay(1);
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+ /* Remove analog reset and Power on the PLL */
+ pChipcHw->PLLConfig &=
+ ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+ REG_LOCAL_IRQ_RESTORE;
+ }
+
+ /* Wait until PLL is locked */
+ while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
+ || !(pChipcHw->
+ PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+ ;
+
+ /* Remove digital reset */
+ {
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+ REG_LOCAL_IRQ_RESTORE;
+ }
+ }
+}
+
+EXPORT_SYMBOL(chipcHw_pll1Enable);
+
+/****************************************************************************/
+/**
+* @brief Initializes the chipc module
+*
+* This function initializes the PLLs and core system clocks
+*
+*/
+/****************************************************************************/
+
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam /* [ IN ] Misc chip initialization parameter */
+ ) {
+#if !(defined(__KERNEL__) && !defined(STANDALONE))
+ delay_init();
+#endif
+
+ /* Do not program PLL, when warm reset */
+ if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
+ chipcHw_pll1Enable(initParam->pllVcoFreqHz,
+ initParam->ssSupport);
+ chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
+ } else {
+ /* Clear sticky bits */
+ chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
+ }
+ /* Clear sticky bits */
+ chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
+
+ /* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
+ pChipcHw->ACLKClock =
+ (pChipcHw->
+ ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
+ armBusRatio &
+ chipcHw_REG_ACLKClock_CLK_DIV_MASK);
+
+ /* Set various core component frequencies. The order in which this is done is important for some. */
+ /* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
+ /* frequency to find its ratio with the BUS. Hence we must set the ARM first, followed by the BUS, */
+ /* then VPM and RTBUS. */
+
+ chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
+ initParam->busClockFreqHz *
+ initParam->armBusRatio);
+ chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
+ chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
+ initParam->busClockFreqHz *
+ initParam->vpmBusRatio);
+ chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
+ initParam->busClockFreqHz *
+ initParam->ddrBusRatio);
+ chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
+ initParam->busClockFreqHz / 2);
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
new file mode 100644
index 000000000000..2671d8896bbb
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
@@ -0,0 +1,124 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <csp/intcHw.h>
+#include <csp/cache.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+/* ---- Private Variables ------------------------------------------------- */
+void chipcHw_reset_run_from_aram(void);
+
+typedef void (*RUNFUNC) (void);
+
+/****************************************************************************/
+/**
+* @brief warmReset
+*
+* @note warmReset configures the clocks which are not reset back to the state
+* required to execute on reset. To do so we need to copy the code into internal
+* memory to change the ARM clock while we are not executing from DDR.
+*/
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask)
+{
+ int i = 0;
+ RUNFUNC runFunc = (RUNFUNC) (unsigned long)MM_ADDR_IO_ARAM;
+
+ /* Disable all interrupts */
+ intcHw_irq_disable(INTCHW_INTC0, 0xffffffff);
+ intcHw_irq_disable(INTCHW_INTC1, 0xffffffff);
+ intcHw_irq_disable(INTCHW_SINTC, 0xffffffff);
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+ if (mask & chipcHw_REG_SOFT_RESET_CHIP_SOFT) {
+ chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+ }
+ /* Bypass the PLL clocks before reboot */
+ pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+ pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+
+ /* Copy the chipcHw_warmReset_run_from_aram function into ARAM */
+ do {
+ ((uint32_t *) MM_IO_BASE_ARAM)[i] =
+ ((uint32_t *) &chipcHw_reset_run_from_aram)[i];
+ i++;
+ } while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f); /* 0xe1a0f00f == asm ("mov r15, r15"); */
+
+ CSP_CACHE_FLUSH_ALL;
+
+ /* run the function from ARAM */
+ runFunc();
+
+ /* Code will never get here, but include it to balance REG_LOCAL_IRQ_SAVE above */
+ REG_LOCAL_IRQ_RESTORE;
+ }
+}
+
+/* This function must run from internal memory */
+void chipcHw_reset_run_from_aram(void)
+{
+/* Make sure, pipeline is filled with instructions coming from ARAM */
+__asm (" nop \n\t"
+ " nop \n\t"
+#if defined(__KERNEL__) && !defined(STANDALONE)
+ " MRC p15,#0x0,r0,c1,c0,#0 \n\t"
+ " BIC r0,r0,#0xd \n\t"
+ " MCR p15,#0x0,r0,c1,c0,#0 \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+#endif
+ " nop \n\t"
+ " nop \n\t"
+/* Bypass the ARM clock and switch to XTAL clock */
+ " MOV r2,#0x80000000 \n\t"
+ " LDR r3,[r2,#8] \n\t"
+ " ORR r3,r3,#0x20000 \n\t"
+ " STR r3,[r2,#8] \n\t"
+
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+/* Issue reset */
+ " MOV r3,#0x2 \n\t"
+ " STR r3,[r2,#0x80] \n\t"
+/* End here */
+ " MOV pc,pc \n\t");
+/* 0xe1a0f00f == asm ("mov r15, r15"); */
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
new file mode 100644
index 000000000000..54ad964fe94c
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
@@ -0,0 +1,64 @@
+/*****************************************************************************
+* Copyright 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+/****************************************************************************/
+/**
+* @file chipcHw_str.c
+*
+* @brief Contains strings which are useful to linux and csp
+*
+* @note
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+static const char *gMuxStr[] = {
+ "GPIO", /* 0 */
+ "KeyPad", /* 1 */
+ "I2C-Host", /* 2 */
+ "SPI", /* 3 */
+ "Uart", /* 4 */
+ "LED-Mtx-P", /* 5 */
+ "LED-Mtx-S", /* 6 */
+ "SDIO-0", /* 7 */
+ "SDIO-1", /* 8 */
+ "PCM", /* 9 */
+ "I2S", /* 10 */
+ "ETM", /* 11 */
+ "Debug", /* 12 */
+ "Misc", /* 13 */
+ "0xE", /* 14 */
+ "0xF", /* 15 */
+};
+
+/****************************************************************************/
+/**
+* @brief Retrieves a string representation of the mux setting for a pin.
+*
+* @return Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin)
+{
+ if ((pin < 0) || (pin >= chipcHw_GPIO_COUNT)) {
+ return "";
+ }
+
+ return gMuxStr[chipcHw_getGpioPinFunction(pin)];
+}
diff --git a/arch/arm/mach-bcmring/csp/dmac/Makefile b/arch/arm/mach-bcmring/csp/dmac/Makefile
new file mode 100644
index 000000000000..fb1104fe56b2
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/Makefile
@@ -0,0 +1 @@
+obj-y += dmacHw.o dmacHw_extra.o \ No newline at end of file
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
new file mode 100644
index 000000000000..7b9bac2d79a5
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
@@ -0,0 +1,917 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw.c
+*
+* @brief Low level DMA controller driver routines
+*
+* @note
+*
+* These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/string.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* Allocate DMA control blocks */
+dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];
+
+uint32_t dmaChannelCount_0 = dmacHw_MAX_CHANNEL_COUNT / 2;
+uint32_t dmaChannelCount_1 = dmacHw_MAX_CHANNEL_COUNT / 2;
+
+/****************************************************************************/
+/**
+* @brief Get maximum FIFO for a DMA channel
+*
+* @return Maximum allowable FIFO size
+*
+*
+*/
+/****************************************************************************/
+static uint32_t GetFifoSize(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ uint32_t val = 0;
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ dmacHw_MISC_t *pMiscReg =
+ (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module);
+
+ switch (pCblk->channel) {
+ case 0:
+ val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28;
+ break;
+ case 1:
+ val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28;
+ break;
+ case 2:
+ val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28;
+ break;
+ case 3:
+ val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28;
+ break;
+ case 4:
+ val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28;
+ break;
+ case 5:
+ val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28;
+ break;
+ case 6:
+ val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28;
+ break;
+ case 7:
+ val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28;
+ break;
+ }
+
+ if (val <= 0x4) {
+ return 8 << val;
+ } else {
+ dmacHw_ASSERT(0);
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Program channel register to initiate transfer
+*
+* @return void
+*
+*
+* @note
+* - Descriptor buffer MUST ALWAYS be flushed before calling this function
+* - This function should also be called from ISR to program the channel with
+* pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ ) {
+ dmacHw_DESC_RING_t *pRing;
+ dmacHw_DESC_t *pProg;
+ dmacHw_CBLK_t *pCblk;
+
+ pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+ if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+ /* Not safe yet to program the channel */
+ return;
+ }
+
+ if (pCblk->varDataStarted) {
+ if (pCblk->descUpdated) {
+ pCblk->descUpdated = 0;
+ pProg =
+ (dmacHw_DESC_t *) ((uint32_t)
+ dmacHw_REG_LLP(pCblk->module,
+ pCblk->channel) +
+ pRing->virt2PhyOffset);
+
+ /* Load descriptor if not loaded */
+ if (!(pProg->ctl.hi & dmacHw_REG_CTL_DONE)) {
+ dmacHw_SET_SAR(pCblk->module, pCblk->channel,
+ pProg->sar);
+ dmacHw_SET_DAR(pCblk->module, pCblk->channel,
+ pProg->dar);
+ dmacHw_REG_CTL_LO(pCblk->module,
+ pCblk->channel) =
+ pProg->ctl.lo;
+ dmacHw_REG_CTL_HI(pCblk->module,
+ pCblk->channel) =
+ pProg->ctl.hi;
+ } else if (pProg == (dmacHw_DESC_t *) pRing->pEnd->llp) {
+ /* Return as end descriptor is processed */
+ return;
+ } else {
+ dmacHw_ASSERT(0);
+ }
+ } else {
+ return;
+ }
+ } else {
+ if (pConfig->transferMode == dmacHw_TRANSFER_MODE_PERIODIC) {
+ /* Do not make a single chain, rather process one descriptor at a time */
+ pProg = pRing->pHead;
+ /* Point to the next descriptor for next iteration */
+ dmacHw_NEXT_DESC(pRing, pHead);
+ } else {
+ /* Return if no more pending descriptor */
+ if (pRing->pEnd == NULL) {
+ return;
+ }
+
+ pProg = pRing->pProg;
+ if (pConfig->transferMode ==
+ dmacHw_TRANSFER_MODE_CONTINUOUS) {
+ /* Make sure a complete ring can be formed */
+ dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pEnd->
+ llp == pRing->pProg);
+ /* Make sure pProg pointing to the pHead */
+ dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pProg ==
+ pRing->pHead);
+ /* Make a complete ring */
+ do {
+ pRing->pProg->ctl.lo |=
+ (dmacHw_REG_CTL_LLP_DST_EN |
+ dmacHw_REG_CTL_LLP_SRC_EN);
+ pRing->pProg =
+ (dmacHw_DESC_t *) pRing->pProg->llp;
+ } while (pRing->pProg != pRing->pHead);
+ } else {
+ /* Make a single long chain */
+ while (pRing->pProg != pRing->pEnd) {
+ pRing->pProg->ctl.lo |=
+ (dmacHw_REG_CTL_LLP_DST_EN |
+ dmacHw_REG_CTL_LLP_SRC_EN);
+ pRing->pProg =
+ (dmacHw_DESC_t *) pRing->pProg->llp;
+ }
+ }
+ }
+
+ /* Program the channel registers */
+ dmacHw_SET_SAR(pCblk->module, pCblk->channel, pProg->sar);
+ dmacHw_SET_DAR(pCblk->module, pCblk->channel, pProg->dar);
+ dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+ (uint32_t) pProg - pRing->virt2PhyOffset);
+ dmacHw_REG_CTL_LO(pCblk->module, pCblk->channel) =
+ pProg->ctl.lo;
+ dmacHw_REG_CTL_HI(pCblk->module, pCblk->channel) =
+ pProg->ctl.hi;
+ if (pRing->pEnd) {
+ /* Remember the descriptor to use next */
+ pRing->pProg = (dmacHw_DESC_t *) pRing->pEnd->llp;
+ }
+ /* Indicate no more pending descriptor */
+ pRing->pEnd = (dmacHw_DESC_t *) NULL;
+ }
+ /* Start DMA operation */
+ dmacHw_DMA_START(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+* @brief Initializes DMA
+*
+* This function initializes DMA CSP driver
+*
+* @note
+* Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void)
+{
+
+ uint32_t i = 0;
+
+ dmaChannelCount_0 = dmacHw_GET_NUM_CHANNEL(0);
+ dmaChannelCount_1 = dmacHw_GET_NUM_CHANNEL(1);
+
+ /* Enable access to the DMA block */
+ chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC0);
+ chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC1);
+
+ if ((dmaChannelCount_0 + dmaChannelCount_1) > dmacHw_MAX_CHANNEL_COUNT) {
+ dmacHw_ASSERT(0);
+ }
+
+ memset((void *)dmacHw_gCblk, 0,
+ sizeof(dmacHw_CBLK_t) * (dmaChannelCount_0 + dmaChannelCount_1));
+ for (i = 0; i < dmaChannelCount_0; i++) {
+ dmacHw_gCblk[i].module = 0;
+ dmacHw_gCblk[i].channel = i;
+ }
+ for (i = 0; i < dmaChannelCount_1; i++) {
+ dmacHw_gCblk[i + dmaChannelCount_0].module = 1;
+ dmacHw_gCblk[i + dmaChannelCount_0].channel = i;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Exit function for DMA
+*
+* This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void)
+{
+ /* Disable access to the DMA block */
+ chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC0);
+ chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC1);
+}
+
+/****************************************************************************/
+/**
+* @brief Gets a handle to a DMA channel
+*
+* This function returns a handle, representing a control block of a particular DMA channel
+*
+* @return -1 - On Failure
+* handle - On Success, representing a channel control block
+*
+* @note
+* None Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId /* [ IN ] DMA Channel Id */
+ ) {
+ int idx;
+
+ switch ((channelId >> 8)) {
+ case 0:
+ dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_0);
+ idx = (channelId & 0xff);
+ break;
+ case 1:
+ dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_1);
+ idx = dmaChannelCount_0 + (channelId & 0xff);
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ return (dmacHw_HANDLE_t) -1;
+ }
+
+ return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[idx]);
+}
+
+/****************************************************************************/
+/**
+* @brief Initializes a DMA channel for use
+*
+* This function initializes and resets a DMA channel for use
+*
+* @return -1 - On Failure
+* 0 - On Success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ int module = pCblk->module;
+ int channel = pCblk->channel;
+
+ /* Reinitialize the control block */
+ memset((void *)pCblk, 0, sizeof(dmacHw_CBLK_t));
+ pCblk->module = module;
+ pCblk->channel = channel;
+
+ /* Enable DMA controller */
+ dmacHw_DMA_ENABLE(pCblk->module);
+ /* Reset DMA channel */
+ dmacHw_RESET_CONTROL_LO(pCblk->module, pCblk->channel);
+ dmacHw_RESET_CONTROL_HI(pCblk->module, pCblk->channel);
+ dmacHw_RESET_CONFIG_LO(pCblk->module, pCblk->channel);
+ dmacHw_RESET_CONFIG_HI(pCblk->module, pCblk->channel);
+
+ /* Clear all raw interrupt status */
+ dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+ /* Mask event specific interrupts */
+ dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+ dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+ dmacHw_STRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+ dmacHw_DTRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+ dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Finds amount of memory required to form a descriptor ring
+*
+*
+* @return Number of bytes required to form a descriptor ring
+*
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt /* [ IN ] Number of descriptor in the ring */
+ ) {
+ /* Need extra 4 byte to ensure 32 bit alignment */
+ return (descCnt * sizeof(dmacHw_DESC_t)) + sizeof(dmacHw_DESC_RING_t) +
+ sizeof(uint32_t);
+}
+
+/****************************************************************************/
+/**
+* @brief Initializes descriptor ring
+*
+* This function will initializes the descriptor ring of a DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+* @note
+* - "len" parameter should be obtained from "dmacHw_descriptorLen"
+* - Descriptor buffer MUST be 32 bit aligned and uncached as it is
+* accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt, /* [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+ uint32_t descriptorPhyAddr, /* [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+ uint32_t len, /* [ IN ] Size of the pBuf */
+ uint32_t num /* [ IN ] Number of descriptor in the ring */
+ ) {
+ uint32_t i;
+ dmacHw_DESC_RING_t *pRing;
+ dmacHw_DESC_t *pDesc;
+
+ /* Check the alignment of the descriptor */
+ if ((uint32_t) pDescriptorVirt & 0x00000003) {
+ dmacHw_ASSERT(0);
+ return -1;
+ }
+
+ /* Check if enough space has been allocated for descriptor ring */
+ if (len < dmacHw_descriptorLen(num)) {
+ return -1;
+ }
+
+ pRing = dmacHw_GET_DESC_RING(pDescriptorVirt);
+ pRing->pHead =
+ (dmacHw_DESC_t *) ((uint32_t) pRing + sizeof(dmacHw_DESC_RING_t));
+ pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+ pRing->pProg = dmacHw_DESC_INIT;
+ /* Initialize link item chain, starting from the head */
+ pDesc = pRing->pHead;
+ /* Find the offset between virtual to physical address */
+ pRing->virt2PhyOffset = (uint32_t) pDescriptorVirt - descriptorPhyAddr;
+
+ /* Form the descriptor ring */
+ for (i = 0; i < num - 1; i++) {
+ /* Clear link list item */
+ memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+ /* Point to the next item in the physical address */
+ pDesc->llpPhy = (uint32_t) (pDesc + 1) - pRing->virt2PhyOffset;
+ /* Point to the next item in the virtual address */
+ pDesc->llp = (uint32_t) (pDesc + 1);
+ /* Mark descriptor is ready to use */
+ pDesc->ctl.hi = dmacHw_DESC_FREE;
+ /* Look into next link list item */
+ pDesc++;
+ }
+
+ /* Clear last link list item */
+ memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+ /* Last item pointing to the first item in the
+ physical address to complete the ring */
+ pDesc->llpPhy = (uint32_t) pRing->pHead - pRing->virt2PhyOffset;
+ /* Last item pointing to the first item in the
+ virtual address to complete the ring
+ */
+ pDesc->llp = (uint32_t) pRing->pHead;
+ /* Mark descriptor is ready to use */
+ pDesc->ctl.hi = dmacHw_DESC_FREE;
+ /* Set the number of descriptors in the ring */
+ pRing->num = num;
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Configure DMA channel
+*
+* @return 0 : On success
+* -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig /* [ IN ] Configuration settings */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ uint32_t cfgHigh = 0;
+ int srcTrSize;
+ int dstTrSize;
+
+ pCblk->varDataStarted = 0;
+ pCblk->userData = NULL;
+
+ /* Configure
+ - Burst transaction when enough data in available in FIFO
+ - AHB Access protection 1
+ - Source and destination peripheral ports
+ */
+ cfgHigh =
+ dmacHw_REG_CFG_HI_FIFO_ENOUGH | dmacHw_REG_CFG_HI_AHB_HPROT_1 |
+ dmacHw_SRC_PERI_INTF(pConfig->
+ srcPeripheralPort) |
+ dmacHw_DST_PERI_INTF(pConfig->dstPeripheralPort);
+ /* Set priority */
+ dmacHw_SET_CHANNEL_PRIORITY(pCblk->module, pCblk->channel,
+ pConfig->channelPriority);
+
+ if (pConfig->dstStatusRegisterAddress != 0) {
+ /* Destination status update enable */
+ cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_DST_STAT;
+ /* Configure status registers */
+ dmacHw_SET_DSTATAR(pCblk->module, pCblk->channel,
+ pConfig->dstStatusRegisterAddress);
+ }
+
+ if (pConfig->srcStatusRegisterAddress != 0) {
+ /* Source status update enable */
+ cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_SRC_STAT;
+ /* Source status update enable */
+ dmacHw_SET_SSTATAR(pCblk->module, pCblk->channel,
+ pConfig->srcStatusRegisterAddress);
+ }
+ /* Configure the config high register */
+ dmacHw_GET_CONFIG_HI(pCblk->module, pCblk->channel) = cfgHigh;
+
+ /* Clear all raw interrupt status */
+ dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+ /* Configure block interrupt */
+ if (pConfig->blockTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+ dmacHw_BLOCK_INT_ENABLE(pCblk->module, pCblk->channel);
+ } else {
+ dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+ }
+ /* Configure complete transfer interrupt */
+ if (pConfig->completeTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+ dmacHw_TRAN_INT_ENABLE(pCblk->module, pCblk->channel);
+ } else {
+ dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+ }
+ /* Configure error interrupt */
+ if (pConfig->errorInterrupt == dmacHw_INTERRUPT_ENABLE) {
+ dmacHw_ERROR_INT_ENABLE(pCblk->module, pCblk->channel);
+ } else {
+ dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+ }
+ /* Configure gather register */
+ if (pConfig->srcGatherWidth) {
+ srcTrSize =
+ dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+ if (!
+ ((pConfig->srcGatherWidth % srcTrSize)
+ && (pConfig->srcGatherJump % srcTrSize))) {
+ dmacHw_REG_SGR_LO(pCblk->module, pCblk->channel) =
+ ((pConfig->srcGatherWidth /
+ srcTrSize) << 20) | (pConfig->srcGatherJump /
+ srcTrSize);
+ } else {
+ return -1;
+ }
+ }
+ /* Configure scatter register */
+ if (pConfig->dstScatterWidth) {
+ dstTrSize =
+ dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+ if (!
+ ((pConfig->dstScatterWidth % dstTrSize)
+ && (pConfig->dstScatterJump % dstTrSize))) {
+ dmacHw_REG_DSR_LO(pCblk->module, pCblk->channel) =
+ ((pConfig->dstScatterWidth /
+ dstTrSize) << 20) | (pConfig->dstScatterJump /
+ dstTrSize);
+ } else {
+ return -1;
+ }
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Indicates whether DMA transfer is in progress or completed
+*
+* @return DMA transfer status
+* dmacHw_TRANSFER_STATUS_BUSY: DMA Transfer ongoing
+* dmacHw_TRANSFER_STATUS_DONE: DMA Transfer completed
+* dmacHw_TRANSFER_STATUS_ERROR: DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+ return dmacHw_TRANSFER_STATUS_BUSY;
+ } else if (dmacHw_REG_INT_RAW_ERROR(pCblk->module) &
+ (0x00000001 << pCblk->channel)) {
+ return dmacHw_TRANSFER_STATUS_ERROR;
+ }
+
+ return dmacHw_TRANSFER_STATUS_DONE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set descriptors for known data length
+*
+* When DMA has to work as a flow controller, this function prepares the
+* descriptor chain to transfer data
+*
+* from:
+* - Memory to memory
+* - Peripheral to memory
+* - Memory to Peripheral
+* - Peripheral to Peripheral
+*
+* @return -1 - On failure
+* 0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ ) {
+ dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+ dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ dmacHw_DESC_t *pStart;
+ dmacHw_DESC_t *pProg;
+ int srcTs = 0;
+ int blkTs = 0;
+ int oddSize = 0;
+ int descCount = 0;
+ int count = 0;
+ int dstTrSize = 0;
+ int srcTrSize = 0;
+ uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+
+ dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+ srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+ /* Skip Tx if buffer is NULL or length is unknown */
+ if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+ /* Do not initiate transfer */
+ return -1;
+ }
+
+ /* Ensure scatter and gather are transaction aligned */
+ if ((pConfig->srcGatherWidth % srcTrSize)
+ || (pConfig->dstScatterWidth % dstTrSize)) {
+ return -2;
+ }
+
+ /*
+ Background 1: DMAC can not perform DMA if source and destination addresses are
+ not properly aligned with the channel's transaction width. So, for successful
+ DMA transfer, transaction width must be set according to the alignment of the
+ source and destination address.
+ */
+
+ /* Adjust destination transaction width if destination address is not aligned properly */
+ dstTrWidth = pConfig->dstMaxTransactionWidth;
+ while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+ dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+ dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+ }
+
+ /* Adjust source transaction width if source address is not aligned properly */
+ srcTrWidth = pConfig->srcMaxTransactionWidth;
+ while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+ srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+ srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+ }
+
+ /* Find the maximum transaction per descriptor */
+ if (pConfig->maxDataPerBlock
+ && ((pConfig->maxDataPerBlock / srcTrSize) <
+ dmacHw_MAX_BLOCKSIZE)) {
+ maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+ }
+
+ /* Find number of source transactions needed to complete the DMA transfer */
+ srcTs = dataLen / srcTrSize;
+ /* Find the odd number of bytes that need to be transferred as single byte transaction width */
+ if (srcTs && (dstTrSize > srcTrSize)) {
+ oddSize = dataLen % dstTrSize;
+ /* Adjust source transaction count due to "oddSize" */
+ srcTs = srcTs - (oddSize / srcTrSize);
+ } else {
+ oddSize = dataLen % srcTrSize;
+ }
+ /* Adjust "descCount" due to "oddSize" */
+ if (oddSize) {
+ descCount++;
+ }
+ /* Find the number of descriptor needed for total "srcTs" */
+ if (srcTs) {
+ descCount += ((srcTs - 1) / maxBlockSize) + 1;
+ }
+
+ /* Check the availability of "descCount" discriptors in the ring */
+ pProg = pRing->pHead;
+ for (count = 0; (descCount <= pRing->num) && (count < descCount);
+ count++) {
+ if ((pProg->ctl.hi & dmacHw_DESC_FREE) == 0) {
+ /* Sufficient descriptors are not available */
+ return -3;
+ }
+ pProg = (dmacHw_DESC_t *) pProg->llp;
+ }
+
+ /* Remember the link list item to program the channel registers */
+ pStart = pProg = pRing->pHead;
+ /* Make a link list with "descCount(=count)" number of descriptors */
+ while (count) {
+ /* Reset channel control information */
+ pProg->ctl.lo = 0;
+ /* Enable source gather if configured */
+ if (pConfig->srcGatherWidth) {
+ pProg->ctl.lo |= dmacHw_REG_CTL_SG_ENABLE;
+ }
+ /* Enable destination scatter if configured */
+ if (pConfig->dstScatterWidth) {
+ pProg->ctl.lo |= dmacHw_REG_CTL_DS_ENABLE;
+ }
+ /* Set source and destination address */
+ pProg->sar = (uint32_t) pSrcAddr;
+ pProg->dar = (uint32_t) pDstAddr;
+ /* Use "devCtl" to mark that user memory need to be freed later if needed */
+ if (pProg == pRing->pHead) {
+ pProg->devCtl = dmacHw_FREE_USER_MEMORY;
+ } else {
+ pProg->devCtl = 0;
+ }
+
+ blkTs = srcTs;
+
+ /* Special treatmeant for last descriptor */
+ if (count == 1) {
+ /* Mark the last descriptor */
+ pProg->ctl.lo &=
+ ~(dmacHw_REG_CTL_LLP_DST_EN |
+ dmacHw_REG_CTL_LLP_SRC_EN);
+ /* Treatment for odd data bytes */
+ if (oddSize) {
+ /* Adjust for single byte transaction width */
+ switch (pConfig->transferType) {
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+ dstTrWidth =
+ dmacHw_DST_TRANSACTION_WIDTH_8;
+ blkTs =
+ (oddSize / srcTrSize) +
+ ((oddSize % srcTrSize) ? 1 : 0);
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+ srcTrWidth =
+ dmacHw_SRC_TRANSACTION_WIDTH_8;
+ blkTs = oddSize;
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+ srcTrWidth =
+ dmacHw_SRC_TRANSACTION_WIDTH_8;
+ dstTrWidth =
+ dmacHw_DST_TRANSACTION_WIDTH_8;
+ blkTs = oddSize;
+ break;
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+ /* Do not adjust the transaction width */
+ break;
+ }
+ } else {
+ srcTs -= blkTs;
+ }
+ } else {
+ if (srcTs / maxBlockSize) {
+ blkTs = maxBlockSize;
+ }
+ /* Remaining source transactions for next iteration */
+ srcTs -= blkTs;
+ }
+ /* Must have a valid source transactions */
+ dmacHw_ASSERT(blkTs > 0);
+ /* Set control information */
+ if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+ pProg->ctl.lo |= pConfig->transferType |
+ pConfig->srcUpdate |
+ pConfig->dstUpdate |
+ srcTrWidth |
+ dstTrWidth |
+ pConfig->srcMaxBurstWidth |
+ pConfig->dstMaxBurstWidth |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+ } else {
+ uint32_t transferType = 0;
+ switch (pConfig->transferType) {
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+ transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+ transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+ pProg->ctl.lo |= transferType |
+ pConfig->srcUpdate |
+ pConfig->dstUpdate |
+ srcTrWidth |
+ dstTrWidth |
+ pConfig->srcMaxBurstWidth |
+ pConfig->dstMaxBurstWidth |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+ }
+
+ /* Set block transaction size */
+ pProg->ctl.hi = blkTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+ /* Look for next descriptor */
+ if (count > 1) {
+ /* Point to the next descriptor */
+ pProg = (dmacHw_DESC_t *) pProg->llp;
+
+ /* Update source and destination address for next iteration */
+ switch (pConfig->transferType) {
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+ if (pConfig->dstScatterWidth) {
+ pDstAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize +
+ (((blkTs * srcTrSize) /
+ pConfig->dstScatterWidth) *
+ pConfig->dstScatterJump);
+ } else {
+ pDstAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize;
+ }
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+ if (pConfig->srcGatherWidth) {
+ pSrcAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize +
+ (((blkTs * srcTrSize) /
+ pConfig->srcGatherWidth) *
+ pConfig->srcGatherJump);
+ } else {
+ pSrcAddr =
+ (char *)pSrcAddr +
+ blkTs * srcTrSize;
+ }
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+ if (pConfig->dstScatterWidth) {
+ pDstAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize +
+ (((blkTs * srcTrSize) /
+ pConfig->dstScatterWidth) *
+ pConfig->dstScatterJump);
+ } else {
+ pDstAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize;
+ }
+
+ if (pConfig->srcGatherWidth) {
+ pSrcAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize +
+ (((blkTs * srcTrSize) /
+ pConfig->srcGatherWidth) *
+ pConfig->srcGatherJump);
+ } else {
+ pSrcAddr =
+ (char *)pSrcAddr +
+ blkTs * srcTrSize;
+ }
+ break;
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+ /* Do not adjust the address */
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+ } else {
+ /* At the end of transfer "srcTs" must be zero */
+ dmacHw_ASSERT(srcTs == 0);
+ }
+ count--;
+ }
+
+ /* Remember the descriptor to initialize the registers */
+ if (pRing->pProg == dmacHw_DESC_INIT) {
+ pRing->pProg = pStart;
+ }
+ /* Indicate that the descriptor is updated */
+ pRing->pEnd = pProg;
+ /* Head pointing to the next descriptor */
+ pRing->pHead = (dmacHw_DESC_t *) pProg->llp;
+ /* Update Tail pointer if destination is a peripheral,
+ because no one is going to read from the pTail
+ */
+ if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+ pRing->pTail = pRing->pHead;
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Provides DMA controller attributes
+*
+*
+* @return DMA controller attributes
+*
+* @note
+* None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controler attribute of type dmacHw_CONTROLLER_ATTRIB_e */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ switch (attr) {
+ case dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM:
+ return dmacHw_GET_NUM_CHANNEL(pCblk->module);
+ case dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE:
+ return (1 <<
+ (dmacHw_GET_MAX_BLOCK_SIZE
+ (pCblk->module, pCblk->module) + 2)) - 8;
+ case dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM:
+ return dmacHw_GET_NUM_INTERFACE(pCblk->module);
+ case dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH:
+ return 32 << dmacHw_GET_CHANNEL_DATA_WIDTH(pCblk->module,
+ pCblk->channel);
+ case dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE:
+ return GetFifoSize(handle);
+ }
+ dmacHw_ASSERT(0);
+ return 0;
+}
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
new file mode 100644
index 000000000000..ff7b436d0935
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -0,0 +1,1017 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw_extra.c
+*
+* @brief Extra Low level DMA controller driver routines
+*
+* @note
+*
+* These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+
+extern dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT]; /* Declared in dmacHw.c */
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* ---- Internal Use Function Prototypes --------------------------------- */
+/****************************************************************************/
+/**
+* @brief Overwrites data length in the descriptor
+*
+* This function overwrites data length in the descriptor
+*
+*
+* @return void
+*
+* @note
+* This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ );
+
+/****************************************************************************/
+/**
+* @brief Helper function to display DMA registers
+*
+* @return void
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static void DisplayRegisterContents(int module, /* [ IN ] DMA Controller unit (0-1) */
+ int channel, /* [ IN ] DMA Channel (0-7) / -1(all) */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Callback to the print function */
+ ) {
+ int chan;
+
+ (*fpPrint) ("Displaying register content \n\n");
+ (*fpPrint) ("Module %d: Interrupt raw transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt raw block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt raw src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt raw dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt raw error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: Interrupt stat transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt stat block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt stat src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt stat dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt stat error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: Interrupt mask transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt mask block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt mask src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt mask dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt mask error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: Interrupt clear transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt clear block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt clear src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt clear dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt clear error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: SW source req 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_SRC_REQ(module)));
+ (*fpPrint) ("Module %d: SW dest req 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_DST_REQ(module)));
+ (*fpPrint) ("Module %d: SW source signal 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_SRC_SGL_REQ(module)));
+ (*fpPrint) ("Module %d: SW dest signal 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_DST_SGL_REQ(module)));
+ (*fpPrint) ("Module %d: SW source last 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_SRC_LST_REQ(module)));
+ (*fpPrint) ("Module %d: SW dest last 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_DST_LST_REQ(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: misc config 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_CFG(module)));
+ (*fpPrint) ("Module %d: misc channel enable 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_CH_ENABLE(module)));
+ (*fpPrint) ("Module %d: misc ID 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_ID(module)));
+ (*fpPrint) ("Module %d: misc test 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_TEST(module)));
+
+ if (channel == -1) {
+ for (chan = 0; chan < 8; chan++) {
+ (*fpPrint)
+ ("--------------------------------------------------\n");
+ (*fpPrint)
+ ("Module %d: Channel %d Source 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Destination 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d LLP 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_LLP(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+ }
+ } else {
+ chan = channel;
+ (*fpPrint)
+ ("--------------------------------------------------\n");
+ (*fpPrint)
+ ("Module %d: Channel %d Source 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_SAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Destination 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_DAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d LLP 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_LLP(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Helper function to display descriptor ring
+*
+* @return void
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static void DisplayDescRing(void *pDescriptor, /* [ IN ] Descriptor buffer */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Callback to the print function */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ dmacHw_DESC_t *pStart;
+
+ if (pRing->pHead == NULL) {
+ return;
+ }
+
+ pStart = pRing->pHead;
+
+ while ((dmacHw_DESC_t *) pStart->llp != pRing->pHead) {
+ if (pStart == pRing->pHead) {
+ (*fpPrint) ("Head\n");
+ }
+ if (pStart == pRing->pTail) {
+ (*fpPrint) ("Tail\n");
+ }
+ if (pStart == pRing->pProg) {
+ (*fpPrint) ("Prog\n");
+ }
+ if (pStart == pRing->pEnd) {
+ (*fpPrint) ("End\n");
+ }
+ if (pStart == pRing->pFree) {
+ (*fpPrint) ("Free\n");
+ }
+ (*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+ (*fpPrint) ("sar 0x%0X\n", pStart->sar);
+ (*fpPrint) ("dar 0x%0X\n", pStart->dar);
+ (*fpPrint) ("llp 0x%0X\n", pStart->llp);
+ (*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+ (*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+ (*fpPrint) ("sstat 0x%0X\n", pStart->sstat);
+ (*fpPrint) ("dstat 0x%0X\n", pStart->dstat);
+ (*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+
+ pStart = (dmacHw_DESC_t *) pStart->llp;
+ }
+ if (pStart == pRing->pHead) {
+ (*fpPrint) ("Head\n");
+ }
+ if (pStart == pRing->pTail) {
+ (*fpPrint) ("Tail\n");
+ }
+ if (pStart == pRing->pProg) {
+ (*fpPrint) ("Prog\n");
+ }
+ if (pStart == pRing->pEnd) {
+ (*fpPrint) ("End\n");
+ }
+ if (pStart == pRing->pFree) {
+ (*fpPrint) ("Free\n");
+ }
+ (*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+ (*fpPrint) ("sar 0x%0X\n", pStart->sar);
+ (*fpPrint) ("dar 0x%0X\n", pStart->dar);
+ (*fpPrint) ("llp 0x%0X\n", pStart->llp);
+ (*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+ (*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+ (*fpPrint) ("sstat 0x%0X\n", pStart->sstat);
+ (*fpPrint) ("dstat 0x%0X\n", pStart->dstat);
+ (*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+}
+
+/****************************************************************************/
+/**
+* @brief Check if DMA channel is the flow controller
+*
+* @return 1 : If DMA is a flow controler
+* 0 : Peripheral is the flow controller
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static inline int DmaIsFlowController(void *pDescriptor /* [ IN ] Descriptor buffer */
+ ) {
+ uint32_t ttfc =
+ (dmacHw_GET_DESC_RING(pDescriptor))->pTail->ctl.
+ lo & dmacHw_REG_CTL_TTFC_MASK;
+
+ switch (ttfc) {
+ case dmacHw_REG_CTL_TTFC_MM_DMAC:
+ case dmacHw_REG_CTL_TTFC_MP_DMAC:
+ case dmacHw_REG_CTL_TTFC_PM_DMAC:
+ case dmacHw_REG_CTL_TTFC_PP_DMAC:
+ return 1;
+ }
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Overwrites data length in the descriptor
+*
+* This function overwrites data length in the descriptor
+*
+*
+* @return void
+*
+* @note
+* This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ ) {
+ dmacHw_DESC_t *pProg;
+ dmacHw_DESC_t *pHead;
+ int srcTs = 0;
+ int srcTrSize = 0;
+
+ pHead = (dmacHw_GET_DESC_RING(pDescriptor))->pHead;
+ pProg = pHead;
+
+ srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+ srcTs = dataLen / srcTrSize;
+ do {
+ pProg->ctl.hi = srcTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+ pProg = (dmacHw_DESC_t *) pProg->llp;
+ } while (pProg != pHead);
+}
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the DMA channel specific interrupt
+*
+*
+* @return void
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+* @brief Returns the cause of channel specific DMA interrupt
+*
+* This function returns the cause of interrupt
+*
+* @return Interrupt status, each bit representing a specific type of interrupt
+*
+* @note
+* Should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ dmacHw_INTERRUPT_STATUS_e status = dmacHw_INTERRUPT_STATUS_NONE;
+
+ if (dmacHw_REG_INT_STAT_TRAN(pCblk->module) &
+ ((0x00000001 << pCblk->channel))) {
+ status |= dmacHw_INTERRUPT_STATUS_TRANS;
+ }
+ if (dmacHw_REG_INT_STAT_BLOCK(pCblk->module) &
+ ((0x00000001 << pCblk->channel))) {
+ status |= dmacHw_INTERRUPT_STATUS_BLOCK;
+ }
+ if (dmacHw_REG_INT_STAT_ERROR(pCblk->module) &
+ ((0x00000001 << pCblk->channel))) {
+ status |= dmacHw_INTERRUPT_STATUS_ERROR;
+ }
+
+ return status;
+}
+
+/****************************************************************************/
+/**
+* @brief Indentifies a DMA channel causing interrupt
+*
+* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+* @return NULL : No channel causing DMA interrupt
+* ! NULL : Handle to a channel causing DMA interrupt
+* @note
+* dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void)
+{
+ uint32_t i;
+
+ for (i = 0; i < dmaChannelCount_0 + dmaChannelCount_1; i++) {
+ if ((dmacHw_REG_INT_STAT_TRAN(dmacHw_gCblk[i].module) &
+ ((0x00000001 << dmacHw_gCblk[i].channel)))
+ || (dmacHw_REG_INT_STAT_BLOCK(dmacHw_gCblk[i].module) &
+ ((0x00000001 << dmacHw_gCblk[i].channel)))
+ || (dmacHw_REG_INT_STAT_ERROR(dmacHw_gCblk[i].module) &
+ ((0x00000001 << dmacHw_gCblk[i].channel)))
+ ) {
+ return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[i]);
+ }
+ }
+ return dmacHw_CBLK_TO_HANDLE(NULL);
+}
+
+/****************************************************************************/
+/**
+* @brief Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+* @return On failure : -1
+* On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ ) {
+ int srcTs = 0;
+ int oddSize = 0;
+ int descCount = 0;
+ int dstTrSize = 0;
+ int srcTrSize = 0;
+ uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+ dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+ dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+
+ dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+ srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+ /* Skip Tx if buffer is NULL or length is unknown */
+ if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+ /* Do not initiate transfer */
+ return -1;
+ }
+
+ /* Ensure scatter and gather are transaction aligned */
+ if (pConfig->srcGatherWidth % srcTrSize
+ || pConfig->dstScatterWidth % dstTrSize) {
+ return -1;
+ }
+
+ /*
+ Background 1: DMAC can not perform DMA if source and destination addresses are
+ not properly aligned with the channel's transaction width. So, for successful
+ DMA transfer, transaction width must be set according to the alignment of the
+ source and destination address.
+ */
+
+ /* Adjust destination transaction width if destination address is not aligned properly */
+ dstTrWidth = pConfig->dstMaxTransactionWidth;
+ while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+ dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+ dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+ }
+
+ /* Adjust source transaction width if source address is not aligned properly */
+ srcTrWidth = pConfig->srcMaxTransactionWidth;
+ while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+ srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+ srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+ }
+
+ /* Find the maximum transaction per descriptor */
+ if (pConfig->maxDataPerBlock
+ && ((pConfig->maxDataPerBlock / srcTrSize) <
+ dmacHw_MAX_BLOCKSIZE)) {
+ maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+ }
+
+ /* Find number of source transactions needed to complete the DMA transfer */
+ srcTs = dataLen / srcTrSize;
+ /* Find the odd number of bytes that need to be transferred as single byte transaction width */
+ if (srcTs && (dstTrSize > srcTrSize)) {
+ oddSize = dataLen % dstTrSize;
+ /* Adjust source transaction count due to "oddSize" */
+ srcTs = srcTs - (oddSize / srcTrSize);
+ } else {
+ oddSize = dataLen % srcTrSize;
+ }
+ /* Adjust "descCount" due to "oddSize" */
+ if (oddSize) {
+ descCount++;
+ }
+
+ /* Find the number of descriptor needed for total "srcTs" */
+ if (srcTs) {
+ descCount += ((srcTs - 1) / maxBlockSize) + 1;
+ }
+
+ return descCount;
+}
+
+/****************************************************************************/
+/**
+* @brief Check the existance of pending descriptor
+*
+* This function confirmes if there is any pending descriptor in the chain
+* to program the channel
+*
+* @return 1 : Channel need to be programmed with pending descriptor
+* 0 : No more pending descriptor to programe the channel
+*
+* @note
+* - This function should be called from ISR in case there are pending
+* descriptor to program the channel.
+*
+* Example:
+*
+* dmac_isr ()
+* {
+* ...
+* if (dmacHw_descriptorPending (handle))
+* {
+* dmacHw_initiateTransfer (handle);
+* }
+* }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+ /* Make sure channel is not busy */
+ if (!CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+ /* Check if pEnd is not processed */
+ if (pRing->pEnd) {
+ /* Something left for processing */
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Program channel register to stop transfer
+*
+* Ensures the channel is not doing any transfer after calling this function
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk;
+
+ pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ /* Stop the channel */
+ dmacHw_DMA_STOP(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+* @brief Deallocates source or destination memory, allocated
+*
+* This function can be called to deallocate data memory that was DMAed successfully
+*
+* @return On failure : -1
+* On success : Number of buffer freed
+*
+* @note
+* This function will be called ONLY, when source OR destination address is pointing
+* to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ uint32_t count = 0;
+
+ if (fpFree == NULL) {
+ return -1;
+ }
+
+ while ((pRing->pFree != pRing->pTail)
+ && (pRing->pFree->ctl.lo & dmacHw_DESC_FREE)) {
+ if (pRing->pFree->devCtl == dmacHw_FREE_USER_MEMORY) {
+ /* Identify, which memory to free */
+ if (dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+ (*fpFree) ((void *)pRing->pFree->dar);
+ } else {
+ /* Destination was a peripheral */
+ (*fpFree) ((void *)pRing->pFree->sar);
+ }
+ /* Unmark user memory to indicate it is freed */
+ pRing->pFree->devCtl = ~dmacHw_FREE_USER_MEMORY;
+ }
+ dmacHw_NEXT_DESC(pRing, pFree);
+
+ count++;
+ }
+
+ return count;
+}
+
+/****************************************************************************/
+/**
+* @brief Prepares descriptor ring, when source peripheral working as a flow controller
+*
+* This function will update the discriptor ring by allocating buffers, when source peripheral
+* has to work as a flow controller to transfer data from:
+* - Peripheral to memory.
+*
+* @return On failure : -1
+* On success : Number of descriptor updated
+*
+*
+* @note
+* Channel must be configured for peripheral to memory transfer
+*
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t srcAddr, /* [ IN ] Source peripheral address */
+ void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */
+ int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+ int num /* [ IN ] Number of descriptor to set */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ dmacHw_DESC_t *pProg = NULL;
+ dmacHw_DESC_t *pLast = NULL;
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ uint32_t dstAddr;
+ uint32_t controlParam;
+ int i;
+
+ dmacHw_ASSERT(pConfig->transferType ==
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM);
+
+ if (num > pRing->num) {
+ return -1;
+ }
+
+ pLast = pRing->pEnd; /* Last descriptor updated */
+ pProg = pRing->pHead; /* First descriptor in the new list */
+
+ controlParam = pConfig->srcUpdate |
+ pConfig->dstUpdate |
+ pConfig->srcMaxTransactionWidth |
+ pConfig->dstMaxTransactionWidth |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface |
+ pConfig->srcMaxBurstWidth |
+ pConfig->dstMaxBurstWidth |
+ dmacHw_REG_CTL_TTFC_PM_PERI |
+ dmacHw_REG_CTL_LLP_DST_EN |
+ dmacHw_REG_CTL_LLP_SRC_EN | dmacHw_REG_CTL_INT_EN;
+
+ for (i = 0; i < num; i++) {
+ /* Allocate Rx buffer only for idle descriptor */
+ if (((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+ ((dmacHw_DESC_t *) pRing->pHead->llp == pRing->pTail)
+ ) {
+ /* Rx descriptor is not idle */
+ break;
+ }
+ /* Set source address */
+ pRing->pHead->sar = srcAddr;
+ if (fpAlloc) {
+ /* Allocate memory for buffer in descriptor */
+ dstAddr = (uint32_t) (*fpAlloc) (len);
+ /* Check the destination address */
+ if (dstAddr == 0) {
+ if (i == 0) {
+ /* Not a single descriptor is available */
+ return -1;
+ }
+ break;
+ }
+ /* Set destination address */
+ pRing->pHead->dar = dstAddr;
+ }
+ /* Set control information */
+ pRing->pHead->ctl.lo = controlParam;
+ /* Use "devCtl" to mark the memory that need to be freed later */
+ pRing->pHead->devCtl = dmacHw_FREE_USER_MEMORY;
+ /* Descriptor is now owned by the channel */
+ pRing->pHead->ctl.hi = 0;
+ /* Remember the descriptor last updated */
+ pRing->pEnd = pRing->pHead;
+ /* Update next descriptor */
+ dmacHw_NEXT_DESC(pRing, pHead);
+ }
+
+ /* Mark the end of the list */
+ pRing->pEnd->ctl.lo &=
+ ~(dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN);
+ /* Connect the list */
+ if (pLast != pProg) {
+ pLast->ctl.lo |=
+ dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN;
+ }
+ /* Mark the descriptors are updated */
+ pCblk->descUpdated = 1;
+ if (!pCblk->varDataStarted) {
+ /* LLP must be pointing to the first descriptor */
+ dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+ (uint32_t) pProg - pRing->virt2PhyOffset);
+ /* Channel, handling variable data started */
+ pCblk->varDataStarted = 1;
+ }
+
+ return i;
+}
+
+/****************************************************************************/
+/**
+* @brief Read data DMAed to memory
+*
+* This function will read data that has been DMAed to memory while transfering from:
+* - Memory to memory
+* - Peripheral to memory
+*
+* @param handle -
+* @param ppBbuf -
+* @param pLen -
+*
+* @return 0 - No more data is available to read
+* 1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void **ppBbuf, /* [ OUT ] Data received */
+ size_t *pLlen /* [ OUT ] Length of the data received */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+ (void)handle;
+
+ if (pConfig->transferMode != dmacHw_TRANSFER_MODE_CONTINUOUS) {
+ if (((pRing->pTail->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+ (pRing->pTail == pRing->pHead)
+ ) {
+ /* No receive data available */
+ *ppBbuf = (char *)NULL;
+ *pLlen = 0;
+
+ return 0;
+ }
+ }
+
+ /* Return read buffer and length */
+ *ppBbuf = (char *)pRing->pTail->dar;
+
+ /* Extract length of the received data */
+ if (DmaIsFlowController(pDescriptor)) {
+ uint32_t srcTrSize = 0;
+
+ switch (pRing->pTail->ctl.lo & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_8:
+ srcTrSize = 1;
+ break;
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_16:
+ srcTrSize = 2;
+ break;
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_32:
+ srcTrSize = 4;
+ break;
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_64:
+ srcTrSize = 8;
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+ /* Calculate length from the block size */
+ *pLlen =
+ (pRing->pTail->ctl.hi & dmacHw_REG_CTL_BLOCK_TS_MASK) *
+ srcTrSize;
+ } else {
+ /* Extract length from the source peripheral */
+ *pLlen = pRing->pTail->sstat;
+ }
+
+ /* Advance tail to next descriptor */
+ dmacHw_NEXT_DESC(pRing, pTail);
+
+ return 1;
+}
+
+/****************************************************************************/
+/**
+* @brief Set descriptor carrying control information
+*
+* This function will be used to send specific control information to the device
+* using the DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t ctlAddress, /* [ IN ] Address of the device control register */
+ uint32_t control /* [ IN ] Device control information */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+ if (ctlAddress == 0) {
+ return -1;
+ }
+
+ /* Check the availability of descriptors in the ring */
+ if ((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) {
+ return -1;
+ }
+ /* Set control information */
+ pRing->pHead->devCtl = control;
+ /* Set source and destination address */
+ pRing->pHead->sar = (uint32_t) &pRing->pHead->devCtl;
+ pRing->pHead->dar = ctlAddress;
+ /* Set control parameters */
+ if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+ pRing->pHead->ctl.lo = pConfig->transferType |
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_SRC_TRANSACTION_WIDTH_32 |
+ pConfig->dstMaxTransactionWidth |
+ dmacHw_SRC_BURST_WIDTH_0 |
+ dmacHw_DST_BURST_WIDTH_0 |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+ } else {
+ uint32_t transferType = 0;
+ switch (pConfig->transferType) {
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+ transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+ transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+ pRing->pHead->ctl.lo = transferType |
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_SRC_TRANSACTION_WIDTH_32 |
+ pConfig->dstMaxTransactionWidth |
+ dmacHw_SRC_BURST_WIDTH_0 |
+ dmacHw_DST_BURST_WIDTH_0 |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface |
+ pConfig->flowControler | dmacHw_REG_CTL_INT_EN;
+ }
+
+ /* Set block transaction size to one 32 bit transaction */
+ pRing->pHead->ctl.hi = dmacHw_REG_CTL_BLOCK_TS_MASK & 1;
+
+ /* Remember the descriptor to initialize the registers */
+ if (pRing->pProg == dmacHw_DESC_INIT) {
+ pRing->pProg = pRing->pHead;
+ }
+ pRing->pEnd = pRing->pHead;
+
+ /* Advance the descriptor */
+ dmacHw_NEXT_DESC(pRing, pHead);
+
+ /* Update Tail pointer if destination is a peripheral */
+ if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+ pRing->pTail = pRing->pHead;
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Sets channel specific user data
+*
+* This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *userData /* [ IN ] User data */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ pCblk->userData = userData;
+}
+
+/****************************************************************************/
+/**
+* @brief Gets channel specific user data
+*
+* This function returns user data specific to a DMA channel
+*
+* @return user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ return pCblk->userData;
+}
+
+/****************************************************************************/
+/**
+* @brief Resets descriptor control information
+*
+* @return void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */
+ ) {
+ int i;
+ dmacHw_DESC_RING_t *pRing;
+ dmacHw_DESC_t *pDesc;
+
+ pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ pDesc = pRing->pHead;
+
+ for (i = 0; i < pRing->num; i++) {
+ /* Mark descriptor is ready to use */
+ pDesc->ctl.hi = dmacHw_DESC_FREE;
+ /* Look into next link list item */
+ pDesc++;
+ }
+ pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+ pRing->pProg = dmacHw_DESC_INIT;
+}
+
+/****************************************************************************/
+/**
+* @brief Displays channel specific registers and other control parameters
+*
+* @return void
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ DisplayRegisterContents(pCblk->module, pCblk->channel, fpPrint);
+ DisplayDescRing(pDescriptor, fpPrint);
+}
diff --git a/arch/arm/mach-bcmring/csp/tmr/Makefile b/arch/arm/mach-bcmring/csp/tmr/Makefile
new file mode 100644
index 000000000000..244a61ab7697
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/Makefile
@@ -0,0 +1 @@
+obj-y += tmrHw.o
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
new file mode 100644
index 000000000000..5c1c9a0e5ed2
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -0,0 +1,576 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file tmrHw.c
+*
+* @brief Low level Timer driver routines
+*
+* @note
+*
+* These routines provide basic timer functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+
+#include <csp/tmrHw.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define tmrHw_ASSERT(a) if (!(a)) *(char *)0 = 0
+#define tmrHw_MILLISEC_PER_SEC (1000)
+
+#define tmrHw_LOW_1_RESOLUTION_COUNT (tmrHw_LOW_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_LOW_1_MAX_MILLISEC (0xFFFFFFFF / tmrHw_LOW_1_RESOLUTION_COUNT)
+#define tmrHw_LOW_16_RESOLUTION_COUNT (tmrHw_LOW_1_RESOLUTION_COUNT / 16)
+#define tmrHw_LOW_16_MAX_MILLISEC (0xFFFFFFFF / tmrHw_LOW_16_RESOLUTION_COUNT)
+#define tmrHw_LOW_256_RESOLUTION_COUNT (tmrHw_LOW_1_RESOLUTION_COUNT / 256)
+#define tmrHw_LOW_256_MAX_MILLISEC (0xFFFFFFFF / tmrHw_LOW_256_RESOLUTION_COUNT)
+
+#define tmrHw_HIGH_1_RESOLUTION_COUNT (tmrHw_HIGH_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_HIGH_1_MAX_MILLISEC (0xFFFFFFFF / tmrHw_HIGH_1_RESOLUTION_COUNT)
+#define tmrHw_HIGH_16_RESOLUTION_COUNT (tmrHw_HIGH_1_RESOLUTION_COUNT / 16)
+#define tmrHw_HIGH_16_MAX_MILLISEC (0xFFFFFFFF / tmrHw_HIGH_16_RESOLUTION_COUNT)
+#define tmrHw_HIGH_256_RESOLUTION_COUNT (tmrHw_HIGH_1_RESOLUTION_COUNT / 256)
+#define tmrHw_HIGH_256_MAX_MILLISEC (0xFFFFFFFF / tmrHw_HIGH_256_RESOLUTION_COUNT)
+
+static void ResetTimer(tmrHw_ID_t timerId)
+ __attribute__ ((section(".aramtext")));
+static int tmrHw_divide(int num, int denom)
+ __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Get timer capability
+*
+* This function returns various capabilities/attributes of a timer
+*
+* @return Capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_CAPABILITY_e capability /* [ IN ] Timer capability */
+) {
+ switch (capability) {
+ case tmrHw_CAPABILITY_CLOCK:
+ return (timerId <=
+ 1) ? tmrHw_LOW_RESOLUTION_CLOCK :
+ tmrHw_HIGH_RESOLUTION_CLOCK;
+ case tmrHw_CAPABILITY_RESOLUTION:
+ return 32;
+ default:
+ return 0;
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Resets a timer
+*
+* This function initializes timer
+*
+* @return void
+*
+*/
+/****************************************************************************/
+static void ResetTimer(tmrHw_ID_t timerId /* [ IN ] Timer Id */
+) {
+ /* Reset timer */
+ pTmrHw[timerId].LoadValue = 0;
+ pTmrHw[timerId].CurrentValue = 0xFFFFFFFF;
+ pTmrHw[timerId].Control = 0;
+ pTmrHw[timerId].BackgroundLoad = 0;
+ /* Always configure as a 32 bit timer */
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_32BIT;
+ /* Clear interrupt only if raw status interrupt is set */
+ if (pTmrHw[timerId].RawInterruptStatus) {
+ pTmrHw[timerId].InterruptClear = 0xFFFFFFFF;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Sets counter value for an interval in ms
+*
+* @return On success: Effective counter value set
+* On failure: 0
+*
+*/
+/****************************************************************************/
+static tmrHw_INTERVAL_t SetTimerPeriod(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in milli-second */
+) {
+ uint32_t scale = 0;
+ uint32_t count = 0;
+
+ if (timerId == 0 || timerId == 1) {
+ if (msec <= tmrHw_LOW_1_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+ scale = tmrHw_LOW_1_RESOLUTION_COUNT;
+ } else if (msec <= tmrHw_LOW_16_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+ scale = tmrHw_LOW_16_RESOLUTION_COUNT;
+ } else if (msec <= tmrHw_LOW_256_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+ scale = tmrHw_LOW_256_RESOLUTION_COUNT;
+ } else {
+ return 0;
+ }
+
+ count = msec * scale;
+ /* Set counter value */
+ pTmrHw[timerId].LoadValue = count;
+ pTmrHw[timerId].BackgroundLoad = count;
+
+ } else if (timerId == 2 || timerId == 3) {
+ if (msec <= tmrHw_HIGH_1_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+ scale = tmrHw_HIGH_1_RESOLUTION_COUNT;
+ } else if (msec <= tmrHw_HIGH_16_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+ scale = tmrHw_HIGH_16_RESOLUTION_COUNT;
+ } else if (msec <= tmrHw_HIGH_256_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+ scale = tmrHw_HIGH_256_RESOLUTION_COUNT;
+ } else {
+ return 0;
+ }
+
+ count = msec * scale;
+ /* Set counter value */
+ pTmrHw[timerId].LoadValue = count;
+ pTmrHw[timerId].BackgroundLoad = count;
+ }
+ return count / scale;
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer in terms of timer interrupt rate
+*
+* This function initializes a periodic timer to generate specific number of
+* timer interrupt per second
+*
+* @return On success: Effective timer frequency
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_RATE_t rate /* [ IN ] Number of timer interrupt per second */
+) {
+ uint32_t resolution = 0;
+ uint32_t count = 0;
+ ResetTimer(timerId);
+
+ /* Set timer mode periodic */
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+ /* Set timer in highest resolution */
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+
+ if (rate && (timerId == 0 || timerId == 1)) {
+ if (rate > tmrHw_LOW_RESOLUTION_CLOCK) {
+ return 0;
+ }
+ resolution = tmrHw_LOW_RESOLUTION_CLOCK;
+ } else if (rate && (timerId == 2 || timerId == 3)) {
+ if (rate > tmrHw_HIGH_RESOLUTION_CLOCK) {
+ return 0;
+ } else {
+ resolution = tmrHw_HIGH_RESOLUTION_CLOCK;
+ }
+ } else {
+ return 0;
+ }
+ /* Find the counter value */
+ count = resolution / rate;
+ /* Set counter value */
+ pTmrHw[timerId].LoadValue = count;
+ pTmrHw[timerId].BackgroundLoad = count;
+
+ return resolution / count;
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer to generate timer interrupt after
+* certain time interval
+*
+* This function initializes a periodic timer to generate timer interrupt
+* after every time interval in millisecond
+*
+* @return On success: Effective interval set in milli-second
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in milli-second */
+) {
+ ResetTimer(timerId);
+
+ /* Set timer mode periodic */
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+ return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer to generate timer interrupt just once
+* after certain time interval
+*
+* This function initializes a periodic timer to generate a single ticks after
+* certain time interval in millisecond
+*
+* @return On success: Effective interval set in milli-second
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in milli-second */
+) {
+ ResetTimer(timerId);
+
+ /* Set timer mode oneshot */
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_ONESHOT;
+
+ return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a timer to run as a free running timer
+*
+* This function initializes a timer to run as a free running timer
+*
+* @return Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ uint32_t divider /* [ IN ] Dividing the clock frequency */
+) {
+ uint32_t scale = 0;
+
+ ResetTimer(timerId);
+ /* Set timer as free running mode */
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_PERIODIC;
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+ if (divider >= 64) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+ scale = 256;
+ } else if (divider >= 8) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+ scale = 16;
+ } else {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+ scale = 1;
+ }
+
+ if (timerId == 0 || timerId == 1) {
+ return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, scale);
+ } else if (timerId == 2 || timerId == 3) {
+ return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, scale);
+ }
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Starts a timer
+*
+* This function starts a preconfigured timer
+*
+* @return -1 - On Failure
+* 0 - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_TIMER_ENABLE;
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Stops a timer
+*
+* This function stops a running timer
+*
+* @return -1 - On Failure
+* 0 - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_TIMER_ENABLE;
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Gets current timer count
+*
+* This function returns the current timer value
+*
+* @return Current downcounting timer value
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ /* return 32 bit timer value */
+ switch (pTmrHw[timerId].Control & tmrHw_CONTROL_MODE_MASK) {
+ case tmrHw_CONTROL_FREE_RUNNING:
+ if (pTmrHw[timerId].CurrentValue) {
+ return tmrHw_MAX_COUNT - pTmrHw[timerId].CurrentValue;
+ }
+ break;
+ case tmrHw_CONTROL_PERIODIC:
+ case tmrHw_CONTROL_ONESHOT:
+ return pTmrHw[timerId].BackgroundLoad -
+ pTmrHw[timerId].CurrentValue;
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Gets timer count rate
+*
+* This function returns the number of counts per second
+*
+* @return Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ uint32_t divider = 0;
+
+ switch (pTmrHw[timerId].Control & tmrHw_CONTROL_PRESCALE_MASK) {
+ case tmrHw_CONTROL_PRESCALE_1:
+ divider = 1;
+ break;
+ case tmrHw_CONTROL_PRESCALE_16:
+ divider = 16;
+ break;
+ case tmrHw_CONTROL_PRESCALE_256:
+ divider = 256;
+ break;
+ default:
+ tmrHw_ASSERT(0);
+ }
+
+ if (timerId == 0 || timerId == 1) {
+ return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, divider);
+ } else {
+ return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, divider);
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Enables timer interrupt
+*
+* This function enables the timer interrupt
+*
+* @return N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disables timer interrupt
+*
+* This function disable the timer interrupt
+*
+* @return N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the timer interrupt
+*
+* @return N/A
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ pTmrHw[timerId].InterruptClear = 0x1;
+}
+
+/****************************************************************************/
+/**
+* @brief Gets the interrupt status
+*
+* This function returns timer interrupt status
+*
+* @return Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ if (pTmrHw[timerId].InterruptStatus) {
+ return tmrHw_INTERRUPT_STATUS_SET;
+ } else {
+ return tmrHw_INTERRUPT_STATUS_UNSET;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Indentifies a timer causing interrupt
+*
+* This functions returns a timer causing interrupt
+*
+* @return 0xFFFFFFFF : No timer causing an interrupt
+* ! 0xFFFFFFFF : timer causing an interrupt
+* @note
+* tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void /* void */
+) {
+ int i;
+
+ for (i = 0; i < tmrHw_TIMER_NUM_COUNT; i++) {
+ if (pTmrHw[i].InterruptStatus) {
+ return i;
+ }
+ }
+
+ return 0xFFFFFFFF;
+}
+
+/****************************************************************************/
+/**
+* @brief Displays specific timer registers
+*
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId, /* [ IN ] Timer id */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+) {
+ (*fpPrint) ("Displaying register contents \n\n");
+ (*fpPrint) ("Timer %d: Load value 0x%X\n", timerId,
+ pTmrHw[timerId].LoadValue);
+ (*fpPrint) ("Timer %d: Background load value 0x%X\n", timerId,
+ pTmrHw[timerId].BackgroundLoad);
+ (*fpPrint) ("Timer %d: Control 0x%X\n", timerId,
+ pTmrHw[timerId].Control);
+ (*fpPrint) ("Timer %d: Interrupt clear 0x%X\n", timerId,
+ pTmrHw[timerId].InterruptClear);
+ (*fpPrint) ("Timer %d: Interrupt raw interrupt 0x%X\n", timerId,
+ pTmrHw[timerId].RawInterruptStatus);
+ (*fpPrint) ("Timer %d: Interrupt status 0x%X\n", timerId,
+ pTmrHw[timerId].InterruptStatus);
+}
+
+/****************************************************************************/
+/**
+* @brief Use a timer to perform a busy wait delay for a number of usecs.
+*
+* @return N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId, /* [ IN ] Timer id */
+ unsigned long usecs /* [ IN ] usec to delay */
+) {
+ tmrHw_RATE_t usec_tick_rate;
+ tmrHw_COUNT_t start_time;
+ tmrHw_COUNT_t delta_time;
+
+ start_time = tmrHw_GetCurrentCount(timerId);
+ usec_tick_rate = tmrHw_divide(tmrHw_getCountRate(timerId), 1000000);
+ delta_time = usecs * usec_tick_rate;
+
+ /* Busy wait */
+ while (delta_time > (tmrHw_GetCurrentCount(timerId) - start_time))
+ ;
+}
+
+/****************************************************************************/
+/**
+* @brief Local Divide function
+*
+* This function does the divide
+*
+* @return divide value
+*
+*/
+/****************************************************************************/
+static int tmrHw_divide(int num, int denom)
+{
+ int r;
+ int t = 1;
+
+ /* Shift denom and t up to the largest value to optimize algorithm */
+ /* t contains the units of each divide */
+ while ((denom & 0x40000000) == 0) { /* fails if denom=0 */
+ denom = denom << 1;
+ t = t << 1;
+ }
+
+ /* Intialize the result */
+ r = 0;
+
+ do {
+ /* Determine if there exists a positive remainder */
+ if ((num - denom) >= 0) {
+ /* Accumlate t to the result and calculate a new remainder */
+ num = num - denom;
+ r = r + t;
+ }
+ /* Continue to shift denom and shift t down to 0 */
+ denom = denom >> 1;
+ t = t >> 1;
+ } while (t != 0);
+ return r;
+}
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
new file mode 100644
index 000000000000..7b20fccb9d4e
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma.c
@@ -0,0 +1,2321 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dma.c
+*
+* @brief Implements the DMA interface.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/proc_fs.h>
+
+#include <mach/timer.h>
+
+#include <linux/mm.h>
+#include <linux/pfn.h>
+#include <asm/atomic.h>
+#include <mach/dma.h>
+
+/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
+/* especially since dc4 doesn't use kmalloc'd memory. */
+
+#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
+
+/* ---- Public Variables ------------------------------------------------- */
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#define MAKE_HANDLE(controllerIdx, channelIdx) (((controllerIdx) << 4) | (channelIdx))
+
+#define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f)
+#define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f)
+
+#define DMA_MAP_DEBUG 0
+
+#if DMA_MAP_DEBUG
+# define DMA_MAP_PRINT(fmt, args...) printk("%s: " fmt, __func__, ## args)
+#else
+# define DMA_MAP_PRINT(fmt, args...)
+#endif
+
+/* ---- Private Variables ------------------------------------------------ */
+
+static DMA_Global_t gDMA;
+static struct proc_dir_entry *gDmaDir;
+
+static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
+
+#include "dma_device.c"
+
+/* ---- Private Function Prototypes -------------------------------------- */
+
+/* ---- Functions ------------------------------------------------------- */
+
+/****************************************************************************/
+/**
+* Displays information for /proc/dma/mem-type
+*/
+/****************************************************************************/
+
+static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+ int len = 0;
+
+ len += sprintf(buf + len, "dma_map_mem statistics\n");
+ len +=
+ sprintf(buf + len, "coherent: %d\n",
+ atomic_read(&gDmaStatMemTypeCoherent));
+ len +=
+ sprintf(buf + len, "kmalloc: %d\n",
+ atomic_read(&gDmaStatMemTypeKmalloc));
+ len +=
+ sprintf(buf + len, "vmalloc: %d\n",
+ atomic_read(&gDmaStatMemTypeVmalloc));
+ len +=
+ sprintf(buf + len, "user: %d\n",
+ atomic_read(&gDmaStatMemTypeUser));
+
+ return len;
+}
+
+/****************************************************************************/
+/**
+* Displays information for /proc/dma/channels
+*/
+/****************************************************************************/
+
+static int dma_proc_read_channels(char *buf, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+ int controllerIdx;
+ int channelIdx;
+ int limit = count - 200;
+ int len = 0;
+ DMA_Channel_t *channel;
+
+ if (down_interruptible(&gDMA.lock) < 0) {
+ return -ERESTARTSYS;
+ }
+
+ for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+ controllerIdx++) {
+ for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+ channelIdx++) {
+ if (len >= limit) {
+ break;
+ }
+
+ channel =
+ &gDMA.controller[controllerIdx].channel[channelIdx];
+
+ len +=
+ sprintf(buf + len, "%d:%d ", controllerIdx,
+ channelIdx);
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+ 0) {
+ len +=
+ sprintf(buf + len, "Dedicated for %s ",
+ DMA_gDeviceAttribute[channel->
+ devType].name);
+ } else {
+ len += sprintf(buf + len, "Shared ");
+ }
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) != 0) {
+ len += sprintf(buf + len, "No ISR ");
+ }
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_LARGE_FIFO) != 0) {
+ len += sprintf(buf + len, "Fifo: 128 ");
+ } else {
+ len += sprintf(buf + len, "Fifo: 64 ");
+ }
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+ len +=
+ sprintf(buf + len, "InUse by %s",
+ DMA_gDeviceAttribute[channel->
+ devType].name);
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ len +=
+ sprintf(buf + len, " (%s:%d)",
+ channel->fileName,
+ channel->lineNum);
+#endif
+ } else {
+ len += sprintf(buf + len, "Avail ");
+ }
+
+ if (channel->lastDevType != DMA_DEVICE_NONE) {
+ len +=
+ sprintf(buf + len, "Last use: %s ",
+ DMA_gDeviceAttribute[channel->
+ lastDevType].
+ name);
+ }
+
+ len += sprintf(buf + len, "\n");
+ }
+ }
+ up(&gDMA.lock);
+ *eof = 1;
+
+ return len;
+}
+
+/****************************************************************************/
+/**
+* Displays information for /proc/dma/devices
+*/
+/****************************************************************************/
+
+static int dma_proc_read_devices(char *buf, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+ int limit = count - 200;
+ int len = 0;
+ int devIdx;
+
+ if (down_interruptible(&gDMA.lock) < 0) {
+ return -ERESTARTSYS;
+ }
+
+ for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+ DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+ if (devAttr->name == NULL) {
+ continue;
+ }
+
+ if (len >= limit) {
+ break;
+ }
+
+ len += sprintf(buf + len, "%-12s ", devAttr->name);
+
+ if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+ len +=
+ sprintf(buf + len, "Dedicated %d:%d ",
+ devAttr->dedicatedController,
+ devAttr->dedicatedChannel);
+ } else {
+ len += sprintf(buf + len, "Shared DMA:");
+ if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA0) != 0) {
+ len += sprintf(buf + len, "0");
+ }
+ if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA1) != 0) {
+ len += sprintf(buf + len, "1");
+ }
+ len += sprintf(buf + len, " ");
+ }
+ if ((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) {
+ len += sprintf(buf + len, "NoISR ");
+ }
+ if ((devAttr->flags & DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) != 0) {
+ len += sprintf(buf + len, "Allow-128 ");
+ }
+
+ len +=
+ sprintf(buf + len,
+ "Xfer #: %Lu Ticks: %Lu Bytes: %Lu DescLen: %u\n",
+ devAttr->numTransfers, devAttr->transferTicks,
+ devAttr->transferBytes,
+ devAttr->ring.bytesAllocated);
+
+ }
+
+ up(&gDMA.lock);
+ *eof = 1;
+
+ return len;
+}
+
+/****************************************************************************/
+/**
+* Determines if a DMA_Device_t is "valid".
+*
+* @return
+* TRUE - dma device is valid
+* FALSE - dma device isn't valid
+*/
+/****************************************************************************/
+
+static inline int IsDeviceValid(DMA_Device_t device)
+{
+ return (device >= 0) && (device < DMA_NUM_DEVICE_ENTRIES);
+}
+
+/****************************************************************************/
+/**
+* Translates a DMA handle into a pointer to a channel.
+*
+* @return
+* non-NULL - pointer to DMA_Channel_t
+* NULL - DMA Handle was invalid
+*/
+/****************************************************************************/
+
+static inline DMA_Channel_t *HandleToChannel(DMA_Handle_t handle)
+{
+ int controllerIdx;
+ int channelIdx;
+
+ controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+ channelIdx = CHANNEL_FROM_HANDLE(handle);
+
+ if ((controllerIdx > DMA_NUM_CONTROLLERS)
+ || (channelIdx > DMA_NUM_CHANNELS)) {
+ return NULL;
+ }
+ return &gDMA.controller[controllerIdx].channel[channelIdx];
+}
+
+/****************************************************************************/
+/**
+* Interrupt handler which is called to process DMA interrupts.
+*/
+/****************************************************************************/
+
+static irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
+{
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+ int irqStatus;
+
+ channel = (DMA_Channel_t *) dev_id;
+
+ /* Figure out why we were called, and knock down the interrupt */
+
+ irqStatus = dmacHw_getInterruptStatus(channel->dmacHwHandle);
+ dmacHw_clearInterrupt(channel->dmacHwHandle);
+
+ if ((channel->devType < 0)
+ || (channel->devType > DMA_NUM_DEVICE_ENTRIES)) {
+ printk(KERN_ERR "dma_interrupt_handler: Invalid devType: %d\n",
+ channel->devType);
+ return IRQ_NONE;
+ }
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ /* Update stats */
+
+ if ((irqStatus & dmacHw_INTERRUPT_STATUS_TRANS) != 0) {
+ devAttr->transferTicks +=
+ (timer_get_tick_count() - devAttr->transferStartTime);
+ }
+
+ if ((irqStatus & dmacHw_INTERRUPT_STATUS_ERROR) != 0) {
+ printk(KERN_ERR
+ "dma_interrupt_handler: devType :%d DMA error (%s)\n",
+ channel->devType, devAttr->name);
+ } else {
+ devAttr->numTransfers++;
+ devAttr->transferBytes += devAttr->numBytes;
+ }
+
+ /* Call any installed handler */
+
+ if (devAttr->devHandler != NULL) {
+ devAttr->devHandler(channel->devType, irqStatus,
+ devAttr->userData);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/****************************************************************************/
+/**
+* Allocates memory to hold a descriptor ring. The descriptor ring then
+* needs to be populated by making one or more calls to
+* dna_add_descriptors.
+*
+* The returned descriptor ring will be automatically initialized.
+*
+* @return
+* 0 Descriptor ring was allocated successfully
+* -EINVAL Invalid parameters passed in
+* -ENOMEM Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to populate */
+ int numDescriptors /* Number of descriptors that need to be allocated. */
+ ) {
+ size_t bytesToAlloc = dmacHw_descriptorLen(numDescriptors);
+
+ if ((ring == NULL) || (numDescriptors <= 0)) {
+ return -EINVAL;
+ }
+
+ ring->physAddr = 0;
+ ring->descriptorsAllocated = 0;
+ ring->bytesAllocated = 0;
+
+ ring->virtAddr = dma_alloc_writecombine(NULL,
+ bytesToAlloc,
+ &ring->physAddr,
+ GFP_KERNEL);
+ if (ring->virtAddr == NULL) {
+ return -ENOMEM;
+ }
+
+ ring->bytesAllocated = bytesToAlloc;
+ ring->descriptorsAllocated = numDescriptors;
+
+ return dma_init_descriptor_ring(ring, numDescriptors);
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring /* Descriptor to release */
+ ) {
+ if (ring->virtAddr != NULL) {
+ dma_free_writecombine(NULL,
+ ring->bytesAllocated,
+ ring->virtAddr, ring->physAddr);
+ }
+
+ ring->bytesAllocated = 0;
+ ring->descriptorsAllocated = 0;
+ ring->virtAddr = NULL;
+ ring->physAddr = 0;
+}
+
+EXPORT_SYMBOL(dma_free_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Initializes a descriptor ring, so that descriptors can be added to it.
+* Once a descriptor ring has been allocated, it may be reinitialized for
+* use with additional/different regions of memory.
+*
+* Note that if 7 descriptors are allocated, it's perfectly acceptable to
+* initialize the ring with a smaller number of descriptors. The amount
+* of memory allocated for the descriptor ring will not be reduced, and
+* the descriptor ring may be reinitialized later
+*
+* @return
+* 0 Descriptor ring was initialized successfully
+* -ENOMEM The descriptor which was passed in has insufficient space
+* to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to initialize */
+ int numDescriptors /* Number of descriptors to initialize. */
+ ) {
+ if (ring->virtAddr == NULL) {
+ return -EINVAL;
+ }
+ if (dmacHw_initDescriptor(ring->virtAddr,
+ ring->physAddr,
+ ring->bytesAllocated, numDescriptors) < 0) {
+ printk(KERN_ERR
+ "dma_init_descriptor_ring: dmacHw_initDescriptor failed\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_init_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Determines the number of descriptors which would be required for a
+* transfer of the indicated memory region.
+*
+* This function also needs to know which DMA device this transfer will
+* be destined for, so that the appropriate DMA configuration can be retrieved.
+* DMA parameters such as transfer width, and whether this is a memory-to-memory
+* or memory-to-peripheral, etc can all affect the actual number of descriptors
+* required.
+*
+* @return
+* > 0 Returns the number of descriptors required for the indicated transfer
+* -ENODEV - Device handed in is invalid.
+* -EINVAL Invalid parameters
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device, /* DMA Device that this will be associated with */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ ) {
+ int numDescriptors;
+ DMA_DeviceAttribute_t *devAttr;
+
+ if (!IsDeviceValid(device)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[device];
+
+ numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+ (void *)srcData,
+ (void *)dstData,
+ numBytes);
+ if (numDescriptors < 0) {
+ printk(KERN_ERR
+ "dma_calculate_descriptor_count: dmacHw_calculateDescriptorCount failed\n");
+ return -EINVAL;
+ }
+
+ return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_calculate_descriptor_count);
+
+/****************************************************************************/
+/**
+* Adds a region of memory to the descriptor ring. Note that it may take
+* multiple descriptors for each region of memory. It is the callers
+* responsibility to allocate a sufficiently large descriptor ring.
+*
+* @return
+* 0 Descriptors were added successfully
+* -ENODEV Device handed in is invalid.
+* -EINVAL Invalid parameters
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring, /* Descriptor ring to add descriptors to */
+ DMA_Device_t device, /* DMA Device that descriptors are for */
+ dma_addr_t srcData, /* Place to get data (memory or device) */
+ dma_addr_t dstData, /* Place to put data (memory or device) */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ ) {
+ int rc;
+ DMA_DeviceAttribute_t *devAttr;
+
+ if (!IsDeviceValid(device)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[device];
+
+ rc = dmacHw_setDataDescriptor(&devAttr->config,
+ ring->virtAddr,
+ (void *)srcData,
+ (void *)dstData, numBytes);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "dma_add_descriptors: dmacHw_setDataDescriptor failed with code: %d\n",
+ rc);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_add_descriptors);
+
+/****************************************************************************/
+/**
+* Sets the descriptor ring associated with a device.
+*
+* Once set, the descriptor ring will be associated with the device, even
+* across channel request/free calls. Passing in a NULL descriptor ring
+* will release any descriptor ring currently associated with the device.
+*
+* Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+* the descriptor ring may be released and reallocated.
+*
+* Note: This function will release the descriptor memory for any current
+* descriptor ring associated with this device.
+*
+* @return
+* 0 Descriptors were added successfully
+* -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device, /* Device to update the descriptor ring for. */
+ DMA_DescriptorRing_t *ring /* Descriptor ring to add descriptors to */
+ ) {
+ DMA_DeviceAttribute_t *devAttr;
+
+ if (!IsDeviceValid(device)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[device];
+
+ /* Free the previously allocated descriptor ring */
+
+ dma_free_descriptor_ring(&devAttr->ring);
+
+ if (ring != NULL) {
+ /* Copy in the new one */
+
+ devAttr->ring = *ring;
+ }
+
+ /* Set things up so that if dma_transfer is called then this descriptor */
+ /* ring will get freed. */
+
+ devAttr->prevSrcData = 0;
+ devAttr->prevDstData = 0;
+ devAttr->prevNumBytes = 0;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Retrieves the descriptor ring associated with a device.
+*
+* @return
+* 0 Descriptors were added successfully
+* -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device, /* Device to retrieve the descriptor ring for. */
+ DMA_DescriptorRing_t *ring /* Place to store retrieved ring */
+ ) {
+ DMA_DeviceAttribute_t *devAttr;
+
+ memset(ring, 0, sizeof(*ring));
+
+ if (!IsDeviceValid(device)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[device];
+
+ *ring = devAttr->ring;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_get_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Configures a DMA channel.
+*
+* @return
+* >= 0 - Initialization was successfull.
+*
+* -EBUSY - Device is currently being used.
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+static int ConfigChannel(DMA_Handle_t handle)
+{
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+ int controllerIdx;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+ controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+
+ if ((devAttr->flags & DMA_DEVICE_FLAG_PORT_PER_DMAC) != 0) {
+ if (devAttr->config.transferType ==
+ dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL) {
+ devAttr->config.dstPeripheralPort =
+ devAttr->dmacPort[controllerIdx];
+ } else if (devAttr->config.transferType ==
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) {
+ devAttr->config.srcPeripheralPort =
+ devAttr->dmacPort[controllerIdx];
+ }
+ }
+
+ if (dmacHw_configChannel(channel->dmacHwHandle, &devAttr->config) != 0) {
+ printk(KERN_ERR "ConfigChannel: dmacHw_configChannel failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* Intializes all of the data structures associated with the DMA.
+* @return
+* >= 0 - Initialization was successfull.
+*
+* -EBUSY - Device is currently being used.
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_init(void)
+{
+ int rc = 0;
+ int controllerIdx;
+ int channelIdx;
+ DMA_Device_t devIdx;
+ DMA_Channel_t *channel;
+ DMA_Handle_t dedicatedHandle;
+
+ memset(&gDMA, 0, sizeof(gDMA));
+
+ init_MUTEX_LOCKED(&gDMA.lock);
+ init_waitqueue_head(&gDMA.freeChannelQ);
+
+ /* Initialize the Hardware */
+
+ dmacHw_initDma();
+
+ /* Start off by marking all of the DMA channels as shared. */
+
+ for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+ controllerIdx++) {
+ for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+ channelIdx++) {
+ channel =
+ &gDMA.controller[controllerIdx].channel[channelIdx];
+
+ channel->flags = 0;
+ channel->devType = DMA_DEVICE_NONE;
+ channel->lastDevType = DMA_DEVICE_NONE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ channel->fileName = "";
+ channel->lineNum = 0;
+#endif
+
+ channel->dmacHwHandle =
+ dmacHw_getChannelHandle(dmacHw_MAKE_CHANNEL_ID
+ (controllerIdx,
+ channelIdx));
+ dmacHw_initChannel(channel->dmacHwHandle);
+ }
+ }
+
+ /* Record any special attributes that channels may have */
+
+ gDMA.controller[0].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+ gDMA.controller[0].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+ gDMA.controller[1].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+ gDMA.controller[1].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+
+ /* Now walk through and record the dedicated channels. */
+
+ for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+ DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+ if (((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0)
+ && ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0)) {
+ printk(KERN_ERR
+ "DMA Device: %s Can only request NO_ISR for dedicated devices\n",
+ devAttr->name);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+ /* This is a dedicated device. Mark the channel as being reserved. */
+
+ if (devAttr->dedicatedController >= DMA_NUM_CONTROLLERS) {
+ printk(KERN_ERR
+ "DMA Device: %s DMA Controller %d is out of range\n",
+ devAttr->name,
+ devAttr->dedicatedController);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if (devAttr->dedicatedChannel >= DMA_NUM_CHANNELS) {
+ printk(KERN_ERR
+ "DMA Device: %s DMA Channel %d is out of range\n",
+ devAttr->name,
+ devAttr->dedicatedChannel);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ dedicatedHandle =
+ MAKE_HANDLE(devAttr->dedicatedController,
+ devAttr->dedicatedChannel);
+ channel = HandleToChannel(dedicatedHandle);
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+ 0) {
+ printk
+ ("DMA Device: %s attempting to use same DMA Controller:Channel (%d:%d) as %s\n",
+ devAttr->name,
+ devAttr->dedicatedController,
+ devAttr->dedicatedChannel,
+ DMA_gDeviceAttribute[channel->devType].
+ name);
+ rc = -EBUSY;
+ goto out;
+ }
+
+ channel->flags |= DMA_CHANNEL_FLAG_IS_DEDICATED;
+ channel->devType = devIdx;
+
+ if (devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) {
+ channel->flags |= DMA_CHANNEL_FLAG_NO_ISR;
+ }
+
+ /* For dedicated channels, we can go ahead and configure the DMA channel now */
+ /* as well. */
+
+ ConfigChannel(dedicatedHandle);
+ }
+ }
+
+ /* Go through and register the interrupt handlers */
+
+ for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+ controllerIdx++) {
+ for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+ channelIdx++) {
+ channel =
+ &gDMA.controller[controllerIdx].channel[channelIdx];
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) == 0) {
+ snprintf(channel->name, sizeof(channel->name),
+ "dma %d:%d %s", controllerIdx,
+ channelIdx,
+ channel->devType ==
+ DMA_DEVICE_NONE ? "" :
+ DMA_gDeviceAttribute[channel->devType].
+ name);
+
+ rc =
+ request_irq(IRQ_DMA0C0 +
+ (controllerIdx *
+ DMA_NUM_CHANNELS) +
+ channelIdx,
+ dma_interrupt_handler,
+ IRQF_DISABLED, channel->name,
+ channel);
+ if (rc != 0) {
+ printk(KERN_ERR
+ "request_irq for IRQ_DMA%dC%d failed\n",
+ controllerIdx, channelIdx);
+ }
+ }
+ }
+ }
+
+ /* Create /proc/dma/channels and /proc/dma/devices */
+
+ gDmaDir = create_proc_entry("dma", S_IFDIR | S_IRUGO | S_IXUGO, NULL);
+
+ if (gDmaDir == NULL) {
+ printk(KERN_ERR "Unable to create /proc/dma\n");
+ } else {
+ create_proc_read_entry("channels", 0, gDmaDir,
+ dma_proc_read_channels, NULL);
+ create_proc_read_entry("devices", 0, gDmaDir,
+ dma_proc_read_devices, NULL);
+ create_proc_read_entry("mem-type", 0, gDmaDir,
+ dma_proc_read_mem_type, NULL);
+ }
+
+out:
+
+ up(&gDMA.lock);
+
+ return rc;
+}
+
+/****************************************************************************/
+/**
+* Reserves a channel for use with @a dev. If the device is setup to use
+* a shared channel, then this function will block until a free channel
+* becomes available.
+*
+* @return
+* >= 0 - A valid DMA Handle.
+* -EBUSY - Device is currently being used.
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg
+ (DMA_Device_t dev, const char *fileName, int lineNum)
+#else
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+#endif
+{
+ DMA_Handle_t handle;
+ DMA_DeviceAttribute_t *devAttr;
+ DMA_Channel_t *channel;
+ int controllerIdx;
+ int controllerIdx2;
+ int channelIdx;
+
+ if (down_interruptible(&gDMA.lock) < 0) {
+ return -ERESTARTSYS;
+ }
+
+ if ((dev < 0) || (dev >= DMA_NUM_DEVICE_ENTRIES)) {
+ handle = -ENODEV;
+ goto out;
+ }
+ devAttr = &DMA_gDeviceAttribute[dev];
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ {
+ char *s;
+
+ s = strrchr(fileName, '/');
+ if (s != NULL) {
+ fileName = s + 1;
+ }
+ }
+#endif
+ if ((devAttr->flags & DMA_DEVICE_FLAG_IN_USE) != 0) {
+ /* This device has already been requested and not been freed */
+
+ printk(KERN_ERR "%s: device %s is already requested\n",
+ __func__, devAttr->name);
+ handle = -EBUSY;
+ goto out;
+ }
+
+ if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+ /* This device has a dedicated channel. */
+
+ channel =
+ &gDMA.controller[devAttr->dedicatedController].
+ channel[devAttr->dedicatedChannel];
+ if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+ handle = -EBUSY;
+ goto out;
+ }
+
+ channel->flags |= DMA_CHANNEL_FLAG_IN_USE;
+ devAttr->flags |= DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ channel->fileName = fileName;
+ channel->lineNum = lineNum;
+#endif
+ handle =
+ MAKE_HANDLE(devAttr->dedicatedController,
+ devAttr->dedicatedChannel);
+ goto out;
+ }
+
+ /* This device needs to use one of the shared channels. */
+
+ handle = DMA_INVALID_HANDLE;
+ while (handle == DMA_INVALID_HANDLE) {
+ /* Scan through the shared channels and see if one is available */
+
+ for (controllerIdx2 = 0; controllerIdx2 < DMA_NUM_CONTROLLERS;
+ controllerIdx2++) {
+ /* Check to see if we should try on controller 1 first. */
+
+ controllerIdx = controllerIdx2;
+ if ((devAttr->
+ flags & DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST) != 0) {
+ controllerIdx = 1 - controllerIdx;
+ }
+
+ /* See if the device is available on the controller being tested */
+
+ if ((devAttr->
+ flags & (DMA_DEVICE_FLAG_ON_DMA0 << controllerIdx))
+ != 0) {
+ for (channelIdx = 0;
+ channelIdx < DMA_NUM_CHANNELS;
+ channelIdx++) {
+ channel =
+ &gDMA.controller[controllerIdx].
+ channel[channelIdx];
+
+ if (((channel->
+ flags &
+ DMA_CHANNEL_FLAG_IS_DEDICATED) ==
+ 0)
+ &&
+ ((channel->
+ flags & DMA_CHANNEL_FLAG_IN_USE)
+ == 0)) {
+ if (((channel->
+ flags &
+ DMA_CHANNEL_FLAG_LARGE_FIFO)
+ != 0)
+ &&
+ ((devAttr->
+ flags &
+ DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO)
+ == 0)) {
+ /* This channel is a large fifo - don't tie it up */
+ /* with devices that we don't want using it. */
+
+ continue;
+ }
+
+ channel->flags |=
+ DMA_CHANNEL_FLAG_IN_USE;
+ channel->devType = dev;
+ devAttr->flags |=
+ DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ channel->fileName = fileName;
+ channel->lineNum = lineNum;
+#endif
+ handle =
+ MAKE_HANDLE(controllerIdx,
+ channelIdx);
+
+ /* Now that we've reserved the channel - we can go ahead and configure it */
+
+ if (ConfigChannel(handle) != 0) {
+ handle = -EIO;
+ printk(KERN_ERR
+ "dma_request_channel: ConfigChannel failed\n");
+ }
+ goto out;
+ }
+ }
+ }
+ }
+
+ /* No channels are currently available. Let's wait for one to free up. */
+
+ {
+ DEFINE_WAIT(wait);
+
+ prepare_to_wait(&gDMA.freeChannelQ, &wait,
+ TASK_INTERRUPTIBLE);
+ up(&gDMA.lock);
+ schedule();
+ finish_wait(&gDMA.freeChannelQ, &wait);
+
+ if (signal_pending(current)) {
+ /* We don't currently hold gDMA.lock, so we return directly */
+
+ return -ERESTARTSYS;
+ }
+ }
+
+ if (down_interruptible(&gDMA.lock)) {
+ return -ERESTARTSYS;
+ }
+ }
+
+out:
+ up(&gDMA.lock);
+
+ return handle;
+}
+
+/* Create both _dbg and non _dbg functions for modules. */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+#undef dma_request_channel
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+{
+ return dma_request_channel_dbg(dev, __FILE__, __LINE__);
+}
+
+EXPORT_SYMBOL(dma_request_channel_dbg);
+#endif
+EXPORT_SYMBOL(dma_request_channel);
+
+/****************************************************************************/
+/**
+* Frees a previously allocated DMA Handle.
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t handle /* DMA handle. */
+ ) {
+ int rc = 0;
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+
+ if (down_interruptible(&gDMA.lock) < 0) {
+ return -ERESTARTSYS;
+ }
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) == 0) {
+ channel->lastDevType = channel->devType;
+ channel->devType = DMA_DEVICE_NONE;
+ }
+ channel->flags &= ~DMA_CHANNEL_FLAG_IN_USE;
+ devAttr->flags &= ~DMA_DEVICE_FLAG_IN_USE;
+
+out:
+ up(&gDMA.lock);
+
+ wake_up_interruptible(&gDMA.freeChannelQ);
+
+ return rc;
+}
+
+EXPORT_SYMBOL(dma_free_channel);
+
+/****************************************************************************/
+/**
+* Determines if a given device has been configured as using a shared
+* channel.
+*
+* @return
+* 0 Device uses a dedicated channel
+* > zero Device uses a shared channel
+* < zero Error code
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t device /* Device to check. */
+ ) {
+ DMA_DeviceAttribute_t *devAttr;
+
+ if (!IsDeviceValid(device)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[device];
+
+ return ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0);
+}
+
+EXPORT_SYMBOL(dma_device_is_channel_shared);
+
+/****************************************************************************/
+/**
+* Allocates buffers for the descriptors. This is normally done automatically
+* but needs to be done explicitly when initiating a dma from interrupt
+* context.
+*
+* @return
+* 0 Descriptors were allocated successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle, /* DMA Handle */
+ dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ ) {
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+ int numDescriptors;
+ size_t ringBytesRequired;
+ int rc = 0;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ if (devAttr->config.transferType != transferType) {
+ return -EINVAL;
+ }
+
+ /* Figure out how many descriptors we need. */
+
+ /* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+ /* srcData, dstData, numBytes); */
+
+ numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+ (void *)srcData,
+ (void *)dstData,
+ numBytes);
+ if (numDescriptors < 0) {
+ printk(KERN_ERR "%s: dmacHw_calculateDescriptorCount failed\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+ /* a new one. */
+
+ ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+ /* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+ if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+ /* Make sure that this code path is never taken from interrupt context. */
+ /* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+ /* allocation needs to have already been done. */
+
+ might_sleep();
+
+ /* Free the old descriptor ring and allocate a new one. */
+
+ dma_free_descriptor_ring(&devAttr->ring);
+
+ /* And allocate a new one. */
+
+ rc =
+ dma_alloc_descriptor_ring(&devAttr->ring,
+ numDescriptors);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_alloc_descriptor_ring(%d) failed\n",
+ __func__, numDescriptors);
+ return rc;
+ }
+ /* Setup the descriptor for this transfer */
+
+ if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+ devAttr->ring.physAddr,
+ devAttr->ring.bytesAllocated,
+ numDescriptors) < 0) {
+ printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n",
+ __func__);
+ return -EINVAL;
+ }
+ } else {
+ /* We've already got enough ring buffer allocated. All we need to do is reset */
+ /* any control information, just in case the previous DMA was stopped. */
+
+ dmacHw_resetDescriptorControl(devAttr->ring.virtAddr);
+ }
+
+ /* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+ /* as last time, then we don't need to call setDataDescriptor again. */
+
+ if (dmacHw_setDataDescriptor(&devAttr->config,
+ devAttr->ring.virtAddr,
+ (void *)srcData,
+ (void *)dstData, numBytes) < 0) {
+ printk(KERN_ERR "%s: dmacHw_setDataDescriptor failed\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* Remember the critical information for this transfer so that we can eliminate */
+ /* another call to dma_alloc_descriptors if the caller reuses the same buffers */
+
+ devAttr->prevSrcData = srcData;
+ devAttr->prevDstData = dstData;
+ devAttr->prevNumBytes = numBytes;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptors);
+
+/****************************************************************************/
+/**
+* Allocates and sets up descriptors for a double buffered circular buffer.
+*
+* This is primarily intended to be used for things like the ingress samples
+* from a microphone.
+*
+* @return
+* > 0 Number of descriptors actually allocated.
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */
+ dma_addr_t srcData, /* Physical address of source data */
+ dma_addr_t dstData1, /* Physical address of first destination buffer */
+ dma_addr_t dstData2, /* Physical address of second destination buffer */
+ size_t numBytes /* Number of bytes in each destination buffer */
+ ) {
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+ int numDst1Descriptors;
+ int numDst2Descriptors;
+ int numDescriptors;
+ size_t ringBytesRequired;
+ int rc = 0;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ /* Figure out how many descriptors we need. */
+
+ /* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+ /* srcData, dstData, numBytes); */
+
+ numDst1Descriptors =
+ dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+ (void *)dstData1, numBytes);
+ if (numDst1Descriptors < 0) {
+ return -EINVAL;
+ }
+ numDst2Descriptors =
+ dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+ (void *)dstData2, numBytes);
+ if (numDst2Descriptors < 0) {
+ return -EINVAL;
+ }
+ numDescriptors = numDst1Descriptors + numDst2Descriptors;
+ /* printk("numDescriptors: %d\n", numDescriptors); */
+
+ /* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+ /* a new one. */
+
+ ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+ /* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+ if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+ /* Make sure that this code path is never taken from interrupt context. */
+ /* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+ /* allocation needs to have already been done. */
+
+ might_sleep();
+
+ /* Free the old descriptor ring and allocate a new one. */
+
+ dma_free_descriptor_ring(&devAttr->ring);
+
+ /* And allocate a new one. */
+
+ rc =
+ dma_alloc_descriptor_ring(&devAttr->ring,
+ numDescriptors);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_alloc_descriptor_ring(%d) failed\n",
+ __func__, ringBytesRequired);
+ return rc;
+ }
+ }
+
+ /* Setup the descriptor for this transfer. Since this function is used with */
+ /* CONTINUOUS DMA operations, we need to reinitialize every time, otherwise */
+ /* setDataDescriptor will keep trying to append onto the end. */
+
+ if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+ devAttr->ring.physAddr,
+ devAttr->ring.bytesAllocated,
+ numDescriptors) < 0) {
+ printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", __func__);
+ return -EINVAL;
+ }
+
+ /* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+ /* as last time, then we don't need to call setDataDescriptor again. */
+
+ if (dmacHw_setDataDescriptor(&devAttr->config,
+ devAttr->ring.virtAddr,
+ (void *)srcData,
+ (void *)dstData1, numBytes) < 0) {
+ printk(KERN_ERR "%s: dmacHw_setDataDescriptor 1 failed\n",
+ __func__);
+ return -EINVAL;
+ }
+ if (dmacHw_setDataDescriptor(&devAttr->config,
+ devAttr->ring.virtAddr,
+ (void *)srcData,
+ (void *)dstData2, numBytes) < 0) {
+ printk(KERN_ERR "%s: dmacHw_setDataDescriptor 2 failed\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* You should use dma_start_transfer rather than dma_transfer_xxx so we don't */
+ /* try to make the 'prev' variables right. */
+
+ devAttr->prevSrcData = 0;
+ devAttr->prevDstData = 0;
+ devAttr->prevNumBytes = 0;
+
+ return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_alloc_double_dst_descriptors);
+
+/****************************************************************************/
+/**
+* Initiates a transfer when the descriptors have already been setup.
+*
+* This is a special case, and normally, the dma_transfer_xxx functions should
+* be used.
+*
+* @return
+* 0 Transfer was started successfully
+* -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle)
+{
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+ devAttr->ring.virtAddr);
+
+ /* Since we got this far, everything went successfully */
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_start_transfer);
+
+/****************************************************************************/
+/**
+* Stops a previously started DMA transfer.
+*
+* @return
+* 0 Transfer was stopped successfully
+* -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle)
+{
+ DMA_Channel_t *channel;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+
+ dmacHw_stopTransfer(channel->dmacHwHandle);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_stop_transfer);
+
+/****************************************************************************/
+/**
+* Waits for a DMA to complete by polling. This function is only intended
+* to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle)
+{
+ DMA_Channel_t *channel;
+ dmacHw_TRANSFER_STATUS_e status;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+
+ while ((status =
+ dmacHw_transferCompleted(channel->dmacHwHandle)) ==
+ dmacHw_TRANSFER_STATUS_BUSY) {
+ ;
+ }
+
+ if (status == dmacHw_TRANSFER_STATUS_ERROR) {
+ printk(KERN_ERR "%s: DMA transfer failed\n", __func__);
+ return -EIO;
+ }
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_wait_transfer_done);
+
+/****************************************************************************/
+/**
+* Initiates a DMA, allocating the descriptors as required.
+*
+* @return
+* 0 Transfer was started successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle, /* DMA Handle */
+ dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ ) {
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+ int rc = 0;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ if (devAttr->config.transferType != transferType) {
+ return -EINVAL;
+ }
+
+ /* We keep track of the information about the previous request for this */
+ /* device, and if the attributes match, then we can use the descriptors we setup */
+ /* the last time, and not have to reinitialize everything. */
+
+ {
+ rc =
+ dma_alloc_descriptors(handle, transferType, srcData,
+ dstData, numBytes);
+ if (rc != 0) {
+ return rc;
+ }
+ }
+
+ /* And kick off the transfer */
+
+ devAttr->numBytes = numBytes;
+ devAttr->transferStartTime = timer_get_tick_count();
+
+ dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+ devAttr->ring.virtAddr);
+
+ /* Since we got this far, everything went successfully */
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_transfer);
+
+/****************************************************************************/
+/**
+* Set the callback function which will be called when a transfer completes.
+* If a NULL callback function is set, then no callback will occur.
+*
+* @note @a devHandler will be called from IRQ context.
+*
+* @return
+* 0 - Success
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. */
+ DMA_DeviceHandler_t devHandler, /* Function to call when the DMA completes */
+ void *userData /* Pointer which will be passed to devHandler. */
+ ) {
+ DMA_DeviceAttribute_t *devAttr;
+ unsigned long flags;
+
+ if (!IsDeviceValid(dev)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[dev];
+
+ local_irq_save(flags);
+
+ devAttr->userData = userData;
+ devAttr->devHandler = devHandler;
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_handler);
+
+/****************************************************************************/
+/**
+* Initializes a memory mapping structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap)
+{
+ memset(memMap, 0, sizeof(*memMap));
+
+ init_MUTEX(&memMap->lock);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_init_mem_map);
+
+/****************************************************************************/
+/**
+* Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap)
+{
+ down(&memMap->lock); /* Just being paranoid */
+
+ /* Free up any allocated memory */
+
+ up(&memMap->lock);
+ memset(memMap, 0, sizeof(*memMap));
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_term_mem_map);
+
+/****************************************************************************/
+/**
+* Looks at a memory address and categorizes it.
+*
+* @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr)
+{
+ unsigned long addrVal = (unsigned long)addr;
+
+ if (addrVal >= VMALLOC_END) {
+ /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
+
+ /* dma_alloc_xxx pages are physically and virtually contiguous */
+
+ return DMA_MEM_TYPE_DMA;
+ }
+
+ /* Technically, we could add one more classification. Addresses between VMALLOC_END */
+ /* and the beginning of the DMA virtual address could be considered to be I/O space. */
+ /* Right now, nobody cares about this particular classification, so we ignore it. */
+
+ if (is_vmalloc_addr(addr)) {
+ /* Address comes from the vmalloc'd region. Pages are virtually */
+ /* contiguous but NOT physically contiguous */
+
+ return DMA_MEM_TYPE_VMALLOC;
+ }
+
+ if (addrVal >= PAGE_OFFSET) {
+ /* PAGE_OFFSET is typically 0xC0000000 */
+
+ /* kmalloc'd pages are physically contiguous */
+
+ return DMA_MEM_TYPE_KMALLOC;
+ }
+
+ return DMA_MEM_TYPE_USER;
+}
+
+EXPORT_SYMBOL(dma_mem_type);
+
+/****************************************************************************/
+/**
+* Looks at a memory address and determines if we support DMA'ing to/from
+* that type of memory.
+*
+* @return boolean -
+* return value != 0 means dma supported
+* return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr)
+{
+ DMA_MemType_t memType = dma_mem_type(addr);
+
+ return (memType == DMA_MEM_TYPE_DMA)
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+ || (memType == DMA_MEM_TYPE_KMALLOC)
+#endif
+ || (memType == DMA_MEM_TYPE_USER);
+}
+
+EXPORT_SYMBOL(dma_mem_supports_dma);
+
+/****************************************************************************/
+/**
+* Maps in a memory region such that it can be used for performing a DMA.
+*
+* @return
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ enum dma_data_direction dir /* Direction that the mapping will be going */
+ ) {
+ int rc;
+
+ down(&memMap->lock);
+
+ DMA_MAP_PRINT("memMap: %p\n", memMap);
+
+ if (memMap->inUse) {
+ printk(KERN_ERR "%s: memory map %p is already being used\n",
+ __func__, memMap);
+ rc = -EBUSY;
+ goto out;
+ }
+
+ memMap->inUse = 1;
+ memMap->dir = dir;
+ memMap->numRegionsUsed = 0;
+
+ rc = 0;
+
+out:
+
+ DMA_MAP_PRINT("returning %d", rc);
+
+ up(&memMap->lock);
+
+ return rc;
+}
+
+EXPORT_SYMBOL(dma_map_start);
+
+/****************************************************************************/
+/**
+* Adds a segment of memory to a memory map. Each segment is both
+* physically and virtually contiguous.
+*
+* @return 0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+static int dma_map_add_segment(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ DMA_Region_t *region, /* Region that the segment belongs to */
+ void *virtAddr, /* Virtual address of the segment being added */
+ dma_addr_t physAddr, /* Physical address of the segment being added */
+ size_t numBytes /* Number of bytes of the segment being added */
+ ) {
+ DMA_Segment_t *segment;
+
+ DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
+ physAddr, numBytes);
+
+ /* Sanity check */
+
+ if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
+ || (((unsigned long)virtAddr + numBytes)) >
+ ((unsigned long)region->virtAddr + region->numBytes)) {
+ printk(KERN_ERR
+ "%s: virtAddr %p is outside region @ %p len: %d\n",
+ __func__, virtAddr, region->virtAddr, region->numBytes);
+ return -EINVAL;
+ }
+
+ if (region->numSegmentsUsed > 0) {
+ /* Check to see if this segment is physically contiguous with the previous one */
+
+ segment = &region->segment[region->numSegmentsUsed - 1];
+
+ if ((segment->physAddr + segment->numBytes) == physAddr) {
+ /* It is - just add on to the end */
+
+ DMA_MAP_PRINT("appending %d bytes to last segment\n",
+ numBytes);
+
+ segment->numBytes += numBytes;
+
+ return 0;
+ }
+ }
+
+ /* Reallocate to hold more segments, if required. */
+
+ if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
+ DMA_Segment_t *newSegment;
+ size_t oldSize =
+ region->numSegmentsAllocated * sizeof(*newSegment);
+ int newAlloc = region->numSegmentsAllocated + 4;
+ size_t newSize = newAlloc * sizeof(*newSegment);
+
+ newSegment = kmalloc(newSize, GFP_KERNEL);
+ if (newSegment == NULL) {
+ return -ENOMEM;
+ }
+ memcpy(newSegment, region->segment, oldSize);
+ memset(&((uint8_t *) newSegment)[oldSize], 0,
+ newSize - oldSize);
+ kfree(region->segment);
+
+ region->numSegmentsAllocated = newAlloc;
+ region->segment = newSegment;
+ }
+
+ segment = &region->segment[region->numSegmentsUsed];
+ region->numSegmentsUsed++;
+
+ segment->virtAddr = virtAddr;
+ segment->physAddr = physAddr;
+ segment->numBytes = numBytes;
+
+ DMA_MAP_PRINT("returning success\n");
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* Adds a region of memory to a memory map. Each region is virtually
+* contiguous, but not necessarily physically contiguous.
+*
+* @return 0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ void *mem, /* Virtual address that we want to get a map of */
+ size_t numBytes /* Number of bytes being mapped */
+ ) {
+ unsigned long addr = (unsigned long)mem;
+ unsigned int offset;
+ int rc = 0;
+ DMA_Region_t *region;
+ dma_addr_t physAddr;
+
+ down(&memMap->lock);
+
+ DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
+
+ if (!memMap->inUse) {
+ printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
+ __func__);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Reallocate to hold more regions. */
+
+ if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
+ DMA_Region_t *newRegion;
+ size_t oldSize =
+ memMap->numRegionsAllocated * sizeof(*newRegion);
+ int newAlloc = memMap->numRegionsAllocated + 4;
+ size_t newSize = newAlloc * sizeof(*newRegion);
+
+ newRegion = kmalloc(newSize, GFP_KERNEL);
+ if (newRegion == NULL) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ memcpy(newRegion, memMap->region, oldSize);
+ memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
+
+ kfree(memMap->region);
+
+ memMap->numRegionsAllocated = newAlloc;
+ memMap->region = newRegion;
+ }
+
+ region = &memMap->region[memMap->numRegionsUsed];
+ memMap->numRegionsUsed++;
+
+ offset = addr & ~PAGE_MASK;
+
+ region->memType = dma_mem_type(mem);
+ region->virtAddr = mem;
+ region->numBytes = numBytes;
+ region->numSegmentsUsed = 0;
+ region->numLockedPages = 0;
+ region->lockedPages = NULL;
+
+ switch (region->memType) {
+ case DMA_MEM_TYPE_VMALLOC:
+ {
+ atomic_inc(&gDmaStatMemTypeVmalloc);
+
+ /* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
+
+ /* vmalloc'd pages are not physically contiguous */
+
+ rc = -EINVAL;
+ break;
+ }
+
+ case DMA_MEM_TYPE_KMALLOC:
+ {
+ atomic_inc(&gDmaStatMemTypeKmalloc);
+
+ /* kmalloc'd pages are physically contiguous, so they'll have exactly */
+ /* one segment */
+
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+ physAddr =
+ dma_map_single(NULL, mem, numBytes, memMap->dir);
+ rc = dma_map_add_segment(memMap, region, mem, physAddr,
+ numBytes);
+#else
+ rc = -EINVAL;
+#endif
+ break;
+ }
+
+ case DMA_MEM_TYPE_DMA:
+ {
+ /* dma_alloc_xxx pages are physically contiguous */
+
+ atomic_inc(&gDmaStatMemTypeCoherent);
+
+ physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
+
+ dma_sync_single_for_cpu(NULL, physAddr, numBytes,
+ memMap->dir);
+ rc = dma_map_add_segment(memMap, region, mem, physAddr,
+ numBytes);
+ break;
+ }
+
+ case DMA_MEM_TYPE_USER:
+ {
+ size_t firstPageOffset;
+ size_t firstPageSize;
+ struct page **pages;
+ struct task_struct *userTask;
+
+ atomic_inc(&gDmaStatMemTypeUser);
+
+#if 1
+ /* If the pages are user pages, then the dma_mem_map_set_user_task function */
+ /* must have been previously called. */
+
+ if (memMap->userTask == NULL) {
+ printk(KERN_ERR
+ "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* User pages need to be locked. */
+
+ firstPageOffset =
+ (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
+ firstPageSize = PAGE_SIZE - firstPageOffset;
+
+ region->numLockedPages = (firstPageOffset
+ + region->numBytes +
+ PAGE_SIZE - 1) / PAGE_SIZE;
+ pages =
+ kmalloc(region->numLockedPages *
+ sizeof(struct page *), GFP_KERNEL);
+
+ if (pages == NULL) {
+ region->numLockedPages = 0;
+ return -ENOMEM;
+ }
+
+ userTask = memMap->userTask;
+
+ down_read(&userTask->mm->mmap_sem);
+ rc = get_user_pages(userTask, /* task */
+ userTask->mm, /* mm */
+ (unsigned long)region->virtAddr, /* start */
+ region->numLockedPages, /* len */
+ memMap->dir == DMA_FROM_DEVICE, /* write */
+ 0, /* force */
+ pages, /* pages (array of pointers to page) */
+ NULL); /* vmas */
+ up_read(&userTask->mm->mmap_sem);
+
+ if (rc != region->numLockedPages) {
+ kfree(pages);
+ region->numLockedPages = 0;
+
+ if (rc >= 0) {
+ rc = -EINVAL;
+ }
+ } else {
+ uint8_t *virtAddr = region->virtAddr;
+ size_t bytesRemaining;
+ int pageIdx;
+
+ rc = 0; /* Since get_user_pages returns +ve number */
+
+ region->lockedPages = pages;
+
+ /* We've locked the user pages. Now we need to walk them and figure */
+ /* out the physical addresses. */
+
+ /* The first page may be partial */
+
+ dma_map_add_segment(memMap,
+ region,
+ virtAddr,
+ PFN_PHYS(page_to_pfn
+ (pages[0])) +
+ firstPageOffset,
+ firstPageSize);
+
+ virtAddr += firstPageSize;
+ bytesRemaining =
+ region->numBytes - firstPageSize;
+
+ for (pageIdx = 1;
+ pageIdx < region->numLockedPages;
+ pageIdx++) {
+ size_t bytesThisPage =
+ (bytesRemaining >
+ PAGE_SIZE ? PAGE_SIZE :
+ bytesRemaining);
+
+ DMA_MAP_PRINT
+ ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
+ pageIdx, pages[pageIdx],
+ page_to_pfn(pages[pageIdx]),
+ PFN_PHYS(page_to_pfn
+ (pages[pageIdx])));
+
+ dma_map_add_segment(memMap,
+ region,
+ virtAddr,
+ PFN_PHYS(page_to_pfn
+ (pages
+ [pageIdx])),
+ bytesThisPage);
+
+ virtAddr += bytesThisPage;
+ bytesRemaining -= bytesThisPage;
+ }
+ }
+#else
+ printk(KERN_ERR
+ "%s: User mode pages are not yet supported\n",
+ __func__);
+
+ /* user pages are not physically contiguous */
+
+ rc = -EINVAL;
+#endif
+ break;
+ }
+
+ default:
+ {
+ printk(KERN_ERR "%s: Unsupported memory type: %d\n",
+ __func__, region->memType);
+
+ rc = -EINVAL;
+ break;
+ }
+ }
+
+ if (rc != 0) {
+ memMap->numRegionsUsed--;
+ }
+
+out:
+
+ DMA_MAP_PRINT("returning %d\n", rc);
+
+ up(&memMap->lock);
+
+ return rc;
+}
+
+EXPORT_SYMBOL(dma_map_add_segment);
+
+/****************************************************************************/
+/**
+* Maps in a memory region such that it can be used for performing a DMA.
+*
+* @return 0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ void *mem, /* Virtual address that we want to get a map of */
+ size_t numBytes, /* Number of bytes being mapped */
+ enum dma_data_direction dir /* Direction that the mapping will be going */
+ ) {
+ int rc;
+
+ rc = dma_map_start(memMap, dir);
+ if (rc == 0) {
+ rc = dma_map_add_region(memMap, mem, numBytes);
+ if (rc < 0) {
+ /* Since the add fails, this function will fail, and the caller won't */
+ /* call unmap, so we need to do it here. */
+
+ dma_unmap(memMap, 0);
+ }
+ }
+
+ return rc;
+}
+
+EXPORT_SYMBOL(dma_map_mem);
+
+/****************************************************************************/
+/**
+* Setup a descriptor ring for a given memory map.
+*
+* It is assumed that the descriptor ring has already been initialized, and
+* this routine will only reallocate a new descriptor ring if the existing
+* one is too small.
+*
+* @return 0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
+ DMA_MemMap_t *memMap, /* Memory map that will be used */
+ dma_addr_t devPhysAddr /* Physical address of device */
+ ) {
+ int rc;
+ int numDescriptors;
+ DMA_DeviceAttribute_t *devAttr;
+ DMA_Region_t *region;
+ DMA_Segment_t *segment;
+ dma_addr_t srcPhysAddr;
+ dma_addr_t dstPhysAddr;
+ int regionIdx;
+ int segmentIdx;
+
+ devAttr = &DMA_gDeviceAttribute[dev];
+
+ down(&memMap->lock);
+
+ /* Figure out how many descriptors we need */
+
+ numDescriptors = 0;
+ for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+ region = &memMap->region[regionIdx];
+
+ for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+ segmentIdx++) {
+ segment = &region->segment[segmentIdx];
+
+ if (memMap->dir == DMA_TO_DEVICE) {
+ srcPhysAddr = segment->physAddr;
+ dstPhysAddr = devPhysAddr;
+ } else {
+ srcPhysAddr = devPhysAddr;
+ dstPhysAddr = segment->physAddr;
+ }
+
+ rc =
+ dma_calculate_descriptor_count(dev, srcPhysAddr,
+ dstPhysAddr,
+ segment->
+ numBytes);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_calculate_descriptor_count failed: %d\n",
+ __func__, rc);
+ goto out;
+ }
+ numDescriptors += rc;
+ }
+ }
+
+ /* Adjust the size of the ring, if it isn't big enough */
+
+ if (numDescriptors > devAttr->ring.descriptorsAllocated) {
+ dma_free_descriptor_ring(&devAttr->ring);
+ rc =
+ dma_alloc_descriptor_ring(&devAttr->ring,
+ numDescriptors);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_alloc_descriptor_ring failed: %d\n",
+ __func__, rc);
+ goto out;
+ }
+ } else {
+ rc =
+ dma_init_descriptor_ring(&devAttr->ring,
+ numDescriptors);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_init_descriptor_ring failed: %d\n",
+ __func__, rc);
+ goto out;
+ }
+ }
+
+ /* Populate the descriptors */
+
+ for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+ region = &memMap->region[regionIdx];
+
+ for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+ segmentIdx++) {
+ segment = &region->segment[segmentIdx];
+
+ if (memMap->dir == DMA_TO_DEVICE) {
+ srcPhysAddr = segment->physAddr;
+ dstPhysAddr = devPhysAddr;
+ } else {
+ srcPhysAddr = devPhysAddr;
+ dstPhysAddr = segment->physAddr;
+ }
+
+ rc =
+ dma_add_descriptors(&devAttr->ring, dev,
+ srcPhysAddr, dstPhysAddr,
+ segment->numBytes);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_add_descriptors failed: %d\n",
+ __func__, rc);
+ goto out;
+ }
+ }
+ }
+
+ rc = 0;
+
+out:
+
+ up(&memMap->lock);
+ return rc;
+}
+
+EXPORT_SYMBOL(dma_map_create_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Maps in a memory region such that it can be used for performing a DMA.
+*
+* @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ int dirtied /* non-zero if any of the pages were modified */
+ ) {
+ int regionIdx;
+ int segmentIdx;
+ DMA_Region_t *region;
+ DMA_Segment_t *segment;
+
+ for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+ region = &memMap->region[regionIdx];
+
+ for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+ segmentIdx++) {
+ segment = &region->segment[segmentIdx];
+
+ switch (region->memType) {
+ case DMA_MEM_TYPE_VMALLOC:
+ {
+ printk(KERN_ERR
+ "%s: vmalloc'd pages are not yet supported\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ case DMA_MEM_TYPE_KMALLOC:
+ {
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+ dma_unmap_single(NULL,
+ segment->physAddr,
+ segment->numBytes,
+ memMap->dir);
+#endif
+ break;
+ }
+
+ case DMA_MEM_TYPE_DMA:
+ {
+ dma_sync_single_for_cpu(NULL,
+ segment->
+ physAddr,
+ segment->
+ numBytes,
+ memMap->dir);
+ break;
+ }
+
+ case DMA_MEM_TYPE_USER:
+ {
+ /* Nothing to do here. */
+
+ break;
+ }
+
+ default:
+ {
+ printk(KERN_ERR
+ "%s: Unsupported memory type: %d\n",
+ __func__, region->memType);
+ return -EINVAL;
+ }
+ }
+
+ segment->virtAddr = NULL;
+ segment->physAddr = 0;
+ segment->numBytes = 0;
+ }
+
+ if (region->numLockedPages > 0) {
+ int pageIdx;
+
+ /* Some user pages were locked. We need to go and unlock them now. */
+
+ for (pageIdx = 0; pageIdx < region->numLockedPages;
+ pageIdx++) {
+ struct page *page =
+ region->lockedPages[pageIdx];
+
+ if (memMap->dir == DMA_FROM_DEVICE) {
+ SetPageDirty(page);
+ }
+ page_cache_release(page);
+ }
+ kfree(region->lockedPages);
+ region->numLockedPages = 0;
+ region->lockedPages = NULL;
+ }
+
+ region->memType = DMA_MEM_TYPE_NONE;
+ region->virtAddr = NULL;
+ region->numBytes = 0;
+ region->numSegmentsUsed = 0;
+ }
+ memMap->userTask = NULL;
+ memMap->numRegionsUsed = 0;
+ memMap->inUse = 0;
+
+ up(&memMap->lock);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_unmap);
diff --git a/arch/arm/mach-bcmring/dma_device.c b/arch/arm/mach-bcmring/dma_device.c
new file mode 100644
index 000000000000..ca0ad736870b
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma_device.c
@@ -0,0 +1,593 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dma_device.c
+*
+* @brief private array of DMA_DeviceAttribute_t
+*/
+/****************************************************************************/
+
+DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES] = {
+ [DMA_DEVICE_MEM_TO_MEM] = /* MEM 2 MEM */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "mem-to-mem",
+ .config = {
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+
+ },
+ },
+ [DMA_DEVICE_VPM_MEM_TO_MEM] = /* VPM */
+ {
+ .flags = DMA_DEVICE_FLAG_IS_DEDICATED | DMA_DEVICE_FLAG_NO_ISR,
+ .name = "vpm",
+ .dedicatedController = 0,
+ .dedicatedChannel = 0,
+ /* reserve DMA0:0 for VPM */
+ },
+ [DMA_DEVICE_NAND_MEM_TO_MEM] = /* NAND */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "nand",
+ .config = {
+ .srcPeripheralPort = 0,
+ .dstPeripheralPort = 0,
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_6,
+ },
+ },
+ [DMA_DEVICE_PIF_MEM_TO_DEV] = /* PIF TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+ | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+ | DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+ .name = "pif_tx",
+ .dmacPort = {14, 5},
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ /* dstPeripheralPort = 5 or 14 */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ .maxDataPerBlock = 16256,
+ },
+ },
+ [DMA_DEVICE_PIF_DEV_TO_MEM] = /* PIF RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+ | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+ /* DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST */
+ | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+ .name = "pif_rx",
+ .dmacPort = {14, 5},
+ .config = {
+ /* srcPeripheralPort = 5 or 14 */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ .maxDataPerBlock = 16256,
+ },
+ },
+ [DMA_DEVICE_I2S0_DEV_TO_MEM] = /* I2S RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "i2s0_rx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: I2S0 */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_I2S0_MEM_TO_DEV] = /* I2S TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "i2s0_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 1, /* DST: I2S0 */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_I2S1_DEV_TO_MEM] = /* I2S1 RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "i2s1_rx",
+ .config = {
+ .srcPeripheralPort = 2, /* SRC: I2S1 */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_I2S1_MEM_TO_DEV] = /* I2S1 TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "i2s1_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 3, /* DST: I2S1 */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_ESW_MEM_TO_DEV] = /* ESW TX */
+ {
+ .name = "esw_tx",
+ .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+ .dedicatedController = 1,
+ .dedicatedChannel = 3,
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 1, /* DST: ESW (MTP) */
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+ /* DMAx_AHB_SSTATARy */
+ .srcStatusRegisterAddress = 0x00000000,
+ /* DMAx_AHB_DSTATARy */
+ .dstStatusRegisterAddress = 0x30490010,
+ /* DMAx_AHB_CFGy */
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ /* DMAx_AHB_CTLy */
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ },
+ },
+ [DMA_DEVICE_ESW_DEV_TO_MEM] = /* ESW RX */
+ {
+ .name = "esw_rx",
+ .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+ .dedicatedController = 1,
+ .dedicatedChannel = 2,
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: ESW (PTM) */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+ /* DMAx_AHB_SSTATARy */
+ .srcStatusRegisterAddress = 0x30480010,
+ /* DMAx_AHB_DSTATARy */
+ .dstStatusRegisterAddress = 0x00000000,
+ /* DMAx_AHB_CFGy */
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ /* DMAx_AHB_CTLy */
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ },
+ },
+ [DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM] = /* APM Codec A Ingress */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "apm_a_rx",
+ .config = {
+ .srcPeripheralPort = 2, /* SRC: Codec A Ingress FIFO */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV] = /* APM Codec A Egress */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "apm_a_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 3, /* DST: Codec A Egress FIFO */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM] = /* APM Codec B Ingress */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "apm_b_rx",
+ .config = {
+ .srcPeripheralPort = 4, /* SRC: Codec B Ingress FIFO */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV] = /* APM Codec B Egress */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "apm_b_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 5, /* DST: Codec B Egress FIFO */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM] = /* APM Codec C Ingress */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "apm_c_rx",
+ .config = {
+ .srcPeripheralPort = 4, /* SRC: Codec C Ingress FIFO */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_APM_PCM0_DEV_TO_MEM] = /* PCM0 RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "pcm0_rx",
+ .config = {
+ .srcPeripheralPort = 12, /* SRC: PCM0 */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_APM_PCM0_MEM_TO_DEV] = /* PCM0 TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "pcm0_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 13, /* DST: PCM0 */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_APM_PCM1_DEV_TO_MEM] = /* PCM1 RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "pcm1_rx",
+ .config = {
+ .srcPeripheralPort = 14, /* SRC: PCM1 */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_APM_PCM1_MEM_TO_DEV] = /* PCM1 TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "pcm1_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 15, /* DST: PCM1 */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_SPUM_DEV_TO_MEM] = /* SPUM RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "spum_rx",
+ .config = {
+ .srcPeripheralPort = 6, /* SRC: Codec A Ingress FIFO */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ /* Busrt size **MUST** be 16 for SPUM to work */
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ /* on the RX side, SPU needs to be the flow controller */
+ .flowControler = dmacHw_FLOW_CONTROL_PERIPHERAL,
+ },
+ },
+ [DMA_DEVICE_SPUM_MEM_TO_DEV] = /* SPUM TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "spum_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 7, /* DST: SPUM */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ /* Busrt size **MUST** be 16 for SPUM to work */
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_MEM_TO_VRAM] = /* MEM 2 VRAM */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "mem-to-vram",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ },
+ },
+ [DMA_DEVICE_VRAM_TO_MEM] = /* VRAM 2 MEM */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "vram-to-mem",
+ .config = {
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ },
+ },
+};
+EXPORT_SYMBOL(DMA_gDeviceAttribute); /* primarily for dma-test.c */
diff --git a/arch/arm/mach-bcmring/include/cfg_global.h b/arch/arm/mach-bcmring/include/cfg_global.h
new file mode 100644
index 000000000000..f01da877148e
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global.h
@@ -0,0 +1,13 @@
+#ifndef _CFG_GLOBAL_H_
+#define _CFG_GLOBAL_H_
+
+#include <cfg_global_defines.h>
+
+#define CFG_GLOBAL_CHIP BCM11107
+#define CFG_GLOBAL_CHIP_FAMILY CFG_GLOBAL_CHIP_FAMILY_BCMRING
+#define CFG_GLOBAL_CHIP_REV 0xB0
+#define CFG_GLOBAL_RAM_SIZE 0x10000000
+#define CFG_GLOBAL_RAM_BASE 0x00000000
+#define CFG_GLOBAL_RAM_RESERVED_SIZE 0x000000
+
+#endif /* _CFG_GLOBAL_H_ */
diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/cfg_global_defines.h
new file mode 100644
index 000000000000..b5beb0b30734
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global_defines.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CFG_GLOBAL_DEFINES_H
+#define CFG_GLOBAL_DEFINES_H
+
+/* CHIP */
+#define BCM1103 1
+
+#define BCM1191 4
+#define BCM2153 5
+#define BCM2820 6
+
+#define BCM2826 8
+#define FPGA11107 9
+#define BCM11107 10
+#define BCM11109 11
+#define BCM11170 12
+#define BCM11110 13
+#define BCM11211 14
+
+/* CFG_GLOBAL_CHIP_FAMILY types */
+#define CFG_GLOBAL_CHIP_FAMILY_NONE 0
+#define CFG_GLOBAL_CHIP_FAMILY_BCM116X 2
+#define CFG_GLOBAL_CHIP_FAMILY_BCMRING 4
+#define CFG_GLOBAL_CHIP_FAMILY_BCM1103 8
+
+#define IMAGE_HEADER_SIZE_CHECKSUM 4
+#endif
diff --git a/arch/arm/mach-bcmring/include/csp/cache.h b/arch/arm/mach-bcmring/include/csp/cache.h
new file mode 100644
index 000000000000..caa20e59db99
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/cache.h
@@ -0,0 +1,35 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_CACHE_H
+#define CSP_CACHE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <asm/cacheflush.h>
+
+#define CSP_CACHE_FLUSH_ALL flush_cache_all()
+
+#else
+
+#define CSP_CACHE_FLUSH_ALL
+
+#endif
+
+#endif /* CSP_CACHE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/delay.h b/arch/arm/mach-bcmring/include/csp/delay.h
new file mode 100644
index 000000000000..8b3d80367293
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/delay.h
@@ -0,0 +1,36 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_DELAY_H
+#define CSP_DELAY_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+/* Some CSP routines require use of the following delay routines. Use the OS */
+/* version if available, otherwise use a CSP specific definition. */
+/* void udelay(unsigned long usecs); */
+/* void mdelay(unsigned long msecs); */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+ #include <linux/delay.h>
+#else
+ #include <mach/csp/delay.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_DELAY_H */
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
new file mode 100644
index 000000000000..5d510130a25f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -0,0 +1,596 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw.h
+*
+* @brief API definitions for low level DMA controller driver
+*
+*/
+/****************************************************************************/
+#ifndef _DMACHW_H
+#define _DMACHW_H
+
+#include <stddef.h>
+
+#include <csp/stdint.h>
+#include <mach/csp/dmacHw_reg.h>
+
+/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
+
+ System specific channel ID should be defined as follows
+
+ For example:
+
+ #include <dmacHw.h>
+ ...
+ #define systemHw_LCD_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,5)
+ #define systemHw_SWITCH_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,0)
+ #define systemHw_SWITCH_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,1)
+ #define systemHw_APM_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,3)
+ #define systemHw_APM_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,4)
+ ...
+ #define systemHw_SHARED1_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,4)
+ #define systemHw_SHARED2_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,5)
+ #define systemHw_SHARED3_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,6)
+ ...
+*/
+#define dmacHw_MAKE_CHANNEL_ID(m, c) (m << 8 | c)
+
+typedef enum {
+ dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0, /* Channel priority 0. Lowest priority DMA channel */
+ dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1, /* Channel priority 1 */
+ dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2, /* Channel priority 2 */
+ dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3, /* Channel priority 3 */
+ dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4, /* Channel priority 4 */
+ dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5, /* Channel priority 5 */
+ dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6, /* Channel priority 6 */
+ dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7 /* Channel priority 7. Highest priority DMA channel */
+} dmacHw_CHANNEL_PRIORITY_e;
+
+/* Source destination master interface */
+typedef enum {
+ dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1, /* Source DMA master interface 1 */
+ dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2, /* Source DMA master interface 2 */
+ dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1, /* Destination DMA master interface 1 */
+ dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2 /* Destination DMA master interface 2 */
+} dmacHw_MASTER_INTERFACE_e;
+
+typedef enum {
+ dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8, /* Source 8 bit (1 byte) per transaction */
+ dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16, /* Source 16 bit (2 byte) per transaction */
+ dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32, /* Source 32 bit (4 byte) per transaction */
+ dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64, /* Source 64 bit (8 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8, /* Destination 8 bit (1 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16, /* Destination 16 bit (2 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32, /* Destination 32 bit (4 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64 /* Destination 64 bit (8 byte) per transaction */
+} dmacHw_TRANSACTION_WIDTH_e;
+
+typedef enum {
+ dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0, /* Source No burst */
+ dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4, /* Source 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8, /* Source 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16, /* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0, /* Destination No burst */
+ dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4, /* Destination 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8, /* Destination 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16 /* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+} dmacHw_BURST_WIDTH_e;
+
+typedef enum {
+ dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC, /* Memory to memory transfer */
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC, /* Peripheral to memory transfer */
+ dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC, /* Memory to peripheral transfer */
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC /* Peripheral to peripheral transfer */
+} dmacHw_TRANSFER_TYPE_e;
+
+typedef enum {
+ dmacHw_TRANSFER_MODE_PERREQUEST, /* Block transfer per DMA request */
+ dmacHw_TRANSFER_MODE_CONTINUOUS, /* Continuous transfer of streaming data */
+ dmacHw_TRANSFER_MODE_PERIODIC /* Periodic transfer of streaming data */
+} dmacHw_TRANSFER_MODE_e;
+
+typedef enum {
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC, /* Increment source address after every transaction */
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC, /* Decrement source address after every transaction */
+ dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC, /* Increment destination address after every transaction */
+ dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC, /* Decrement destination address after every transaction */
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC, /* No change in source address after every transaction */
+ dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC /* No change in destination address after every transaction */
+} dmacHw_ADDRESS_UPDATE_MODE_e;
+
+typedef enum {
+ dmacHw_FLOW_CONTROL_DMA, /* DMA working as flow controller (default) */
+ dmacHw_FLOW_CONTROL_PERIPHERAL /* Peripheral working as flow controller */
+} dmacHw_FLOW_CONTROL_e;
+
+typedef enum {
+ dmacHw_TRANSFER_STATUS_BUSY, /* DMA Transfer ongoing */
+ dmacHw_TRANSFER_STATUS_DONE, /* DMA Transfer completed */
+ dmacHw_TRANSFER_STATUS_ERROR /* DMA Transfer error */
+} dmacHw_TRANSFER_STATUS_e;
+
+typedef enum {
+ dmacHw_INTERRUPT_DISABLE, /* Interrupt disable */
+ dmacHw_INTERRUPT_ENABLE /* Interrupt enable */
+} dmacHw_INTERRUPT_e;
+
+typedef enum {
+ dmacHw_INTERRUPT_STATUS_NONE = 0x0, /* No DMA interrupt */
+ dmacHw_INTERRUPT_STATUS_TRANS = 0x1, /* End of DMA transfer interrupt */
+ dmacHw_INTERRUPT_STATUS_BLOCK = 0x2, /* End of block transfer interrupt */
+ dmacHw_INTERRUPT_STATUS_ERROR = 0x4 /* Error interrupt */
+} dmacHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM, /* Number of DMA channel */
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE, /* Maximum channel burst size */
+ dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM, /* Number of DMA master interface */
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH, /* Channel Data bus width */
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE /* Channel FIFO size */
+} dmacHw_CONTROLLER_ATTRIB_e;
+
+typedef unsigned long dmacHw_HANDLE_t; /* DMA channel handle */
+typedef uint32_t dmacHw_ID_t; /* DMA channel Id. Must be created using
+ "dmacHw_MAKE_CHANNEL_ID" macro
+ */
+/* DMA channel configuration parameters */
+typedef struct {
+ uint32_t srcPeripheralPort; /* Source peripheral port */
+ uint32_t dstPeripheralPort; /* Destination peripheral port */
+ uint32_t srcStatusRegisterAddress; /* Source status register address */
+ uint32_t dstStatusRegisterAddress; /* Destination status register address of type */
+
+ uint32_t srcGatherWidth; /* Number of bytes gathered before successive gather opearation */
+ uint32_t srcGatherJump; /* Number of bytes jumpped before successive gather opearation */
+ uint32_t dstScatterWidth; /* Number of bytes sacattered before successive scatter opearation */
+ uint32_t dstScatterJump; /* Number of bytes jumpped before successive scatter opearation */
+ uint32_t maxDataPerBlock; /* Maximum number of bytes to be transferred per block/descrptor.
+ 0 = Maximum possible.
+ */
+
+ dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate; /* Source address update mode */
+ dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate; /* Destination address update mode */
+ dmacHw_TRANSFER_TYPE_e transferType; /* DMA transfer type */
+ dmacHw_TRANSFER_MODE_e transferMode; /* DMA transfer mode */
+ dmacHw_MASTER_INTERFACE_e srcMasterInterface; /* DMA source interface */
+ dmacHw_MASTER_INTERFACE_e dstMasterInterface; /* DMA destination interface */
+ dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth; /* Source transaction width */
+ dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth; /* Destination transaction width */
+ dmacHw_BURST_WIDTH_e srcMaxBurstWidth; /* Source burst width */
+ dmacHw_BURST_WIDTH_e dstMaxBurstWidth; /* Destination burst width */
+ dmacHw_INTERRUPT_e blockTransferInterrupt; /* Block trsnafer interrupt */
+ dmacHw_INTERRUPT_e completeTransferInterrupt; /* Complete DMA trsnafer interrupt */
+ dmacHw_INTERRUPT_e errorInterrupt; /* Error interrupt */
+ dmacHw_CHANNEL_PRIORITY_e channelPriority; /* Channel priority */
+ dmacHw_FLOW_CONTROL_e flowControler; /* Data flow controller */
+} dmacHw_CONFIG_t;
+
+/****************************************************************************/
+/**
+* @brief Initializes DMA
+*
+* This function initializes DMA CSP driver
+*
+* @note
+* Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void);
+
+/****************************************************************************/
+/**
+* @brief Exit function for DMA
+*
+* This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void);
+
+/****************************************************************************/
+/**
+* @brief Gets a handle to a DMA channel
+*
+* This function returns a handle, representing a control block of a particular DMA channel
+*
+* @return -1 - On Failure
+* handle - On Success, representing a channel control block
+*
+* @note
+* None Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId /* [ IN ] DMA Channel Id */
+ );
+
+/****************************************************************************/
+/**
+* @brief Initializes a DMA channel for use
+*
+* This function initializes and resets a DMA channel for use
+*
+* @return -1 - On Failure
+* 0 - On Success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+* @return On failure : -1
+* On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ );
+
+/****************************************************************************/
+/**
+* @brief Initializes descriptor ring
+*
+* This function will initializes the descriptor ring of a DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+* @note
+* - "len" parameter should be obtained from "dmacHw_descriptorLen"
+* - Descriptor buffer MUST be 32 bit aligned and uncached as it
+* is accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt, /* [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+ uint32_t descriptorPhyAddr, /* [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+ uint32_t len, /* [ IN ] Size of the pBuf */
+ uint32_t num /* [ IN ] Number of descriptor in the ring */
+ );
+
+/****************************************************************************/
+/**
+* @brief Finds amount of memory required to form a descriptor ring
+*
+*
+* @return Number of bytes required to form a descriptor ring
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt /* [ IN ] Number of descriptor in the ring */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configure DMA channel
+*
+* @return 0 : On success
+* -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig /* [ IN ] Configuration settings */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set descriptors for known data length
+*
+* When DMA has to work as a flow controller, this function prepares the
+* descriptor chain to transfer data
+*
+* from:
+* - Memory to memory
+* - Peripheral to memory
+* - Memory to Peripheral
+* - Peripheral to Peripheral
+*
+* @return -1 - On failure
+* 0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Length in bytes */
+ );
+
+/****************************************************************************/
+/**
+* @brief Indicates whether DMA transfer is in progress or completed
+*
+* @return DMA transfer status
+* dmacHw_TRANSFER_STATUS_BUSY: DMA Transfer ongoing
+* dmacHw_TRANSFER_STATUS_DONE: DMA Transfer completed
+* dmacHw_TRANSFER_STATUS_ERROR: DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set descriptor carrying control information
+*
+* This function will be used to send specific control information to the device
+* using the DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t ctlAddress, /* [ IN ] Address of the device control register */
+ uint32_t control /* [ IN ] Device control information */
+ );
+
+/****************************************************************************/
+/**
+* @brief Read data DMA transferred to memory
+*
+* This function will read data that has been DMAed to memory while transfering from:
+* - Memory to memory
+* - Peripheral to memory
+*
+* @return 0 - No more data is available to read
+* 1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void **ppBbuf, /* [ OUT ] Data received */
+ size_t *pLlen /* [ OUT ] Length of the data received */
+ );
+
+/****************************************************************************/
+/**
+* @brief Prepares descriptor ring, when source peripheral working as a flow controller
+*
+* This function will form the descriptor ring by allocating buffers, when source peripheral
+* has to work as a flow controller to transfer data from:
+* - Peripheral to memory.
+*
+* @return -1 - On failure
+* 0 - On success
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t srcAddr, /* [ IN ] Source peripheral address */
+ void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */
+ int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+ int num /* [ IN ] Number of descriptor to set */
+ );
+
+/****************************************************************************/
+/**
+* @brief Program channel register to initiate transfer
+*
+* @return void
+*
+*
+* @note
+* - Descriptor buffer MUST ALWAYS be flushed before calling this function
+* - This function should also be called from ISR to program the channel with
+* pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ );
+
+/****************************************************************************/
+/**
+* @brief Resets descriptor control information
+*
+* @return void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */
+ );
+
+/****************************************************************************/
+/**
+* @brief Program channel register to stop transfer
+*
+* Ensures the channel is not doing any transfer after calling this function
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Check the existance of pending descriptor
+*
+* This function confirmes if there is any pending descriptor in the chain
+* to program the channel
+*
+* @return 1 : Channel need to be programmed with pending descriptor
+* 0 : No more pending descriptor to programe the channel
+*
+* @note
+* - This function should be called from ISR in case there are pending
+* descriptor to program the channel.
+*
+* Example:
+*
+* dmac_isr ()
+* {
+* ...
+* if (dmacHw_descriptorPending (handle))
+* {
+* dmacHw_initiateTransfer (handle);
+* }
+* }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ );
+
+/****************************************************************************/
+/**
+* @brief Deallocates source or destination memory, allocated
+*
+* This function can be called to deallocate data memory that was DMAed successfully
+*
+* @return -1 - On failure
+* 0 - On success
+*
+* @note
+* This function will be called ONLY, when source OR destination address is pointing
+* to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */
+ );
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the DMA channel specific interrupt
+*
+* @return N/A
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Returns the cause of channel specific DMA interrupt
+*
+* This function returns the cause of interrupt
+*
+* @return Interrupt status, each bit representing a specific type of interrupt
+* of type dmacHw_INTERRUPT_STATUS_e
+* @note
+* This function should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Indentifies a DMA channel causing interrupt
+*
+* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+* @return NULL : No channel causing DMA interrupt
+* ! NULL : Handle to a channel causing DMA interrupt
+* @note
+* dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+* @brief Sets channel specific user data
+*
+* This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *userData /* [ IN ] User data */
+ );
+
+/****************************************************************************/
+/**
+* @brief Gets channel specific user data
+*
+* This function returns user data specific to a DMA channel
+*
+* @return user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Displays channel specific registers and other control parameters
+*
+*
+* @return void
+*
+* @note
+* None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+ );
+
+/****************************************************************************/
+/**
+* @brief Provides DMA controller attributes
+*
+*
+* @return DMA controller attributes
+*
+* @note
+* None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controler attribute of type dmacHw_CONTROLLER_ATTRIB_e */
+ );
+
+#endif /* _DMACHW_H */
diff --git a/arch/arm/mach-bcmring/include/csp/errno.h b/arch/arm/mach-bcmring/include/csp/errno.h
new file mode 100644
index 000000000000..51357dd5b666
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/errno.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_ERRNO_H
+#define CSP_ERRNO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if defined(__KERNEL__)
+#include <linux/errno.h>
+#elif defined(CSP_SIMULATION)
+#include <asm-generic/errno.h>
+#else
+#include <errno.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_ERRNO_H */
diff --git a/arch/arm/mach-bcmring/include/csp/intcHw.h b/arch/arm/mach-bcmring/include/csp/intcHw.h
new file mode 100644
index 000000000000..1c639c8ee08f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/intcHw.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+/****************************************************************************/
+/**
+* @file intcHw.h
+*
+* @brief generic interrupt controller API
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_H
+#define _INTCHW_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/intcHw_reg.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask);
+static inline void intcHw_irq_enable(void *basep, uint32_t mask);
+
+#endif /* _INTCHW_H */
+
diff --git a/arch/arm/mach-bcmring/include/csp/module.h b/arch/arm/mach-bcmring/include/csp/module.h
new file mode 100644
index 000000000000..c30d2a5975a6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/module.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_MODULE_H
+#define CSP_MODULE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+ #include <linux/module.h>
+#else
+ #define EXPORT_SYMBOL(symbol)
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_MODULE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h
new file mode 100644
index 000000000000..e5f60bf5a1f3
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/reg.h
@@ -0,0 +1,114 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file reg.h
+*
+* @brief Generic register defintions used in CSP
+*/
+/****************************************************************************/
+
+#ifndef CSP_REG_H
+#define CSP_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define __REG32(x) (*((volatile uint32_t *)(x)))
+#define __REG16(x) (*((volatile uint16_t *)(x)))
+#define __REG8(x) (*((volatile uint8_t *) (x)))
+
+/* Macros used to define a sequence of reserved registers. The start / end */
+/* are byte offsets in the particular register definition, with the "end" */
+/* being the offset of the next un-reserved register. E.g. if offsets */
+/* 0x10 through to 0x1f are reserved, then this reserved area could be */
+/* specified as follows. */
+/* typedef struct */
+/* { */
+/* uint32_t reg1; offset 0x00 */
+/* uint32_t reg2; offset 0x04 */
+/* uint32_t reg3; offset 0x08 */
+/* uint32_t reg4; offset 0x0c */
+/* REG32_RSVD(0x10, 0x20); */
+/* uint32_t reg5; offset 0x20 */
+/* ... */
+/* } EXAMPLE_REG_t; */
+#define REG8_RSVD(start, end) uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)]
+#define REG16_RSVD(start, end) uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)]
+#define REG32_RSVD(start, end) uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)]
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */
+/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the */
+/* flags variable to be declared locally. */
+/* e.g. */
+/* statement1; */
+/* { */
+/* REG_LOCAL_IRQ_SAVE; */
+/* <multiple statements here> */
+/* REG_LOCAL_IRQ_RESTORE; */
+/* } */
+/* statement2; */
+/* */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <mach/hardware.h>
+#include <linux/interrupt.h>
+
+#define REG_LOCAL_IRQ_SAVE HW_DECLARE_SPINLOCK(reg32) \
+ unsigned long flags; HW_IRQ_SAVE(reg32, flags)
+
+#define REG_LOCAL_IRQ_RESTORE HW_IRQ_RESTORE(reg32, flags)
+
+#else
+
+#define REG_LOCAL_IRQ_SAVE
+#define REG_LOCAL_IRQ_RESTORE
+
+#endif
+
+static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *reg &= value;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *reg |= value;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask,
+ uint32_t value)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *reg = (*reg & mask) | value;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_write(volatile uint32_t *reg, uint32_t value)
+{
+ *reg = value;
+}
+
+#endif /* CSP_REG_H */
diff --git a/arch/arm/mach-bcmring/include/csp/secHw.h b/arch/arm/mach-bcmring/include/csp/secHw.h
new file mode 100644
index 000000000000..b9d7e0732dfc
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/secHw.h
@@ -0,0 +1,65 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file secHw.h
+*
+* @brief Definitions for accessing low level security features
+*
+*/
+/****************************************************************************/
+#ifndef SECHW_H
+#define SECHW_H
+
+typedef void (*secHw_FUNC_t) (void);
+
+typedef enum {
+ secHw_MODE_SECURE = 0x0, /* Switches processor into secure mode */
+ secHw_MODE_NONSECURE = 0x1 /* Switches processor into non-secure mode */
+} secHw_MODE;
+
+/****************************************************************************/
+/**
+* @brief Requesting to execute the function in secure mode
+*
+* This function requests the given function to run in secure mode
+*
+*/
+/****************************************************************************/
+void secHw_RunSecure(secHw_FUNC_t /* Function to run in secure mode */
+ );
+
+/****************************************************************************/
+/**
+* @brief Sets the mode
+*
+* his function sets the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_SetMode(secHw_MODE /* Processor mode */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get the current mode
+*
+* This function retieves the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_GetMode(secHw_MODE *);
+
+#endif /* SECHW_H */
diff --git a/arch/arm/mach-bcmring/include/csp/stdint.h b/arch/arm/mach-bcmring/include/csp/stdint.h
new file mode 100644
index 000000000000..3a8718bbf700
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/stdint.h
@@ -0,0 +1,30 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_STDINT_H
+#define CSP_STDINT_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_STDINT_H */
diff --git a/arch/arm/mach-bcmring/include/csp/string.h b/arch/arm/mach-bcmring/include/csp/string.h
new file mode 100644
index 000000000000..ad9e4005f141
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/string.h
@@ -0,0 +1,34 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+
+#ifndef CSP_STRING_H
+#define CSP_STRING_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+ #include <linux/string.h>
+#else
+ #include <string.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_STRING_H */
+
diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/csp/tmrHw.h
new file mode 100644
index 000000000000..f1236d00cb97
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/tmrHw.h
@@ -0,0 +1,263 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file tmrHw.h
+*
+* @brief API definitions for low level Timer driver
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_H
+#define _TMRHW_H
+
+#include <csp/stdint.h>
+
+typedef uint32_t tmrHw_ID_t; /* Timer ID */
+typedef uint32_t tmrHw_COUNT_t; /* Timer count */
+typedef uint32_t tmrHw_INTERVAL_t; /* Timer interval */
+typedef uint32_t tmrHw_RATE_t; /* Timer event (count/interrupt) rate */
+
+typedef enum {
+ tmrHw_INTERRUPT_STATUS_SET, /* Interrupted */
+ tmrHw_INTERRUPT_STATUS_UNSET /* No Interrupt */
+} tmrHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+ tmrHw_CAPABILITY_CLOCK, /* Clock speed in HHz */
+ tmrHw_CAPABILITY_RESOLUTION /* Timer resolution in bits */
+} tmrHw_CAPABILITY_e;
+
+/****************************************************************************/
+/**
+* @brief Get timer capability
+*
+* This function returns various capabilities/attributes of a timer
+*
+* @return Numeric capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_CAPABILITY_e capability /* [ IN ] Timer capability */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer in terms of timer interrupt rate
+*
+* This function initializes a periodic timer to generate specific number of
+* timer interrupt per second
+*
+* @return On success: Effective timer frequency
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_RATE_t rate /* [ IN ] Number of timer interrupt per second */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer to generate timer interrupt after
+* certain time interval
+*
+* This function initializes a periodic timer to generate timer interrupt
+* after every time interval in milisecond
+*
+* @return On success: Effective interval set in mili-second
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer to generate timer interrupt just once
+* after certain time interval
+*
+* This function initializes a periodic timer to generate a single ticks after
+* certain time interval in milisecond
+*
+* @return On success: Effective interval set in mili-second
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a timer to run as a free running timer
+*
+* This function initializes a timer to run as a free running timer
+*
+* @return Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ uint32_t divider /* [ IN ] Dividing the clock frequency */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Starts a timer
+*
+* This function starts a preconfigured timer
+*
+* @return -1 - On Failure
+* 0 - On Success
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Stops a timer
+*
+* This function stops a running timer
+*
+* @return -1 - On Failure
+* 0 - On Success
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Gets current timer count
+*
+* This function returns the current timer value
+*
+* @return Current downcounting timer value
+*
+*/
+/****************************************************************************/
+tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Gets timer count rate
+*
+* This function returns the number of counts per second
+*
+* @return Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Enables timer interrupt
+*
+* This function enables the timer interrupt
+*
+* @return N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Disables timer interrupt
+*
+* This function disable the timer interrupt
+*
+* @return N/A
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the timer interrupt
+*
+* @return N/A
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Gets the interrupt status
+*
+* This function returns timer interrupt status
+*
+* @return Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Indentifies a timer causing interrupt
+*
+* This functions returns a timer causing interrupt
+*
+* @return 0xFFFFFFFF : No timer causing an interrupt
+* ! 0xFFFFFFFF : timer causing an interrupt
+* @note
+* tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+* @brief Displays specific timer registers
+*
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId, /* [ IN ] Timer id */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+);
+
+/****************************************************************************/
+/**
+* @brief Use a timer to perform a busy wait delay for a number of usecs.
+*
+* @return N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId, /* [ IN ] Timer id */
+ unsigned long usecs /* [ IN ] usec to delay */
+) __attribute__ ((section(".aramtext")));
+
+#endif /* _TMRHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/clkdev.h b/arch/arm/mach-bcmring/include/mach/clkdev.h
new file mode 100644
index 000000000000..04b37a89801c
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap.h b/arch/arm/mach-bcmring/include/mach/csp/cap.h
new file mode 100644
index 000000000000..30fa2d540630
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap.h
@@ -0,0 +1,63 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_H
+#define CAP_H
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Public Constants and Types --------------------------------------- */
+typedef enum {
+ CAP_NOT_PRESENT = 0,
+ CAP_PRESENT
+} CAP_RC_T;
+
+typedef enum {
+ CAP_VPM,
+ CAP_ETH_PHY,
+ CAP_ETH_GMII,
+ CAP_ETH_SGMII,
+ CAP_USB,
+ CAP_TSC,
+ CAP_EHSS,
+ CAP_SDIO,
+ CAP_UARTB,
+ CAP_KEYPAD,
+ CAP_CLCD,
+ CAP_GE,
+ CAP_LEDM,
+ CAP_BBL,
+ CAP_VDEC,
+ CAP_PIF,
+ CAP_APM,
+ CAP_SPU,
+ CAP_PKA,
+ CAP_RNG,
+} CAP_CAPABILITY_T;
+
+typedef enum {
+ CAP_LCD_WVGA = 0,
+ CAP_LCD_VGA = 0x1,
+ CAP_LCD_WQVGA = 0x2,
+ CAP_LCD_QVGA = 0x3
+} CAP_LCD_RES_T;
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index);
+static inline uint32_t cap_getMaxArmSpeedHz(void);
+static inline uint32_t cap_getMaxVpmSpeedHz(void);
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void);
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
new file mode 100644
index 000000000000..933ce68ed90b
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
@@ -0,0 +1,409 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_INLINE_H
+#define CAP_INLINE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/cap.h>
+#include <cfg_global.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+#define CAP_CONFIG0_VPM_DIS 0x00000001
+#define CAP_CONFIG0_ETH_PHY0_DIS 0x00000002
+#define CAP_CONFIG0_ETH_PHY1_DIS 0x00000004
+#define CAP_CONFIG0_ETH_GMII0_DIS 0x00000008
+#define CAP_CONFIG0_ETH_GMII1_DIS 0x00000010
+#define CAP_CONFIG0_ETH_SGMII0_DIS 0x00000020
+#define CAP_CONFIG0_ETH_SGMII1_DIS 0x00000040
+#define CAP_CONFIG0_USB0_DIS 0x00000080
+#define CAP_CONFIG0_USB1_DIS 0x00000100
+#define CAP_CONFIG0_TSC_DIS 0x00000200
+#define CAP_CONFIG0_EHSS0_DIS 0x00000400
+#define CAP_CONFIG0_EHSS1_DIS 0x00000800
+#define CAP_CONFIG0_SDIO0_DIS 0x00001000
+#define CAP_CONFIG0_SDIO1_DIS 0x00002000
+#define CAP_CONFIG0_UARTB_DIS 0x00004000
+#define CAP_CONFIG0_KEYPAD_DIS 0x00008000
+#define CAP_CONFIG0_CLCD_DIS 0x00010000
+#define CAP_CONFIG0_GE_DIS 0x00020000
+#define CAP_CONFIG0_LEDM_DIS 0x00040000
+#define CAP_CONFIG0_BBL_DIS 0x00080000
+#define CAP_CONFIG0_VDEC_DIS 0x00100000
+#define CAP_CONFIG0_PIF_DIS 0x00200000
+#define CAP_CONFIG0_RESERVED1_DIS 0x00400000
+#define CAP_CONFIG0_RESERVED2_DIS 0x00800000
+
+#define CAP_CONFIG1_APMA_DIS 0x00000001
+#define CAP_CONFIG1_APMB_DIS 0x00000002
+#define CAP_CONFIG1_APMC_DIS 0x00000004
+#define CAP_CONFIG1_CLCD_RES_MASK 0x00000600
+#define CAP_CONFIG1_CLCD_RES_SHIFT 9
+#define CAP_CONFIG1_CLCD_RES_WVGA (CAP_LCD_WVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_VGA (CAP_LCD_VGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_WQVGA (CAP_LCD_WQVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_QVGA (CAP_LCD_QVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+
+#define CAP_CONFIG2_SPU_DIS 0x00000010
+#define CAP_CONFIG2_PKA_DIS 0x00000020
+#define CAP_CONFIG2_RNG_DIS 0x00000080
+
+#if (CFG_GLOBAL_CHIP == BCM11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == FPGA11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == BCM11109)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11170)
+#define capConfig0 (CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_USB0_DIS | CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_CLCD_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11110)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define capConfig0 (CAP_CONFIG0_ETH_PHY0_DIS | CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_ETH_SGMII0_DIS | CAP_CONFIG0_ETH_SGMII1_DIS | CAP_CONFIG0_CLCD_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 2
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_ARM_CLK_HZ 500000000
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_ARM_CLK_HZ 300000000
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define CAP_HW_CFG_ARM_CLK_HZ 666666666
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_VPM_CLK_HZ 333333333
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_VPM_CLK_HZ 200000000
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************
+* cap_isPresent -
+*
+* PURPOSE:
+* Determines if the chip has a certain capability present
+*
+* PARAMETERS:
+* capability - type of capability to determine if present
+*
+* RETURNS:
+* CAP_PRESENT or CAP_NOT_PRESENT
+****************************************************************************/
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index)
+{
+ CAP_RC_T returnVal = CAP_NOT_PRESENT;
+
+ switch (capability) {
+ case CAP_VPM:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_VPM_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_ETH_PHY:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_PHY0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_PHY1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_ETH_GMII:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_GMII0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_GMII1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_ETH_SGMII:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_USB:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_USB0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_USB1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_TSC:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_TSC_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_EHSS:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_EHSS0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_EHSS1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_SDIO:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_SDIO0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_SDIO1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_UARTB:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_UARTB_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_KEYPAD:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_KEYPAD_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_CLCD:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_CLCD_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_GE:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_GE_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_LEDM:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_LEDM_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_BBL:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_BBL_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_VDEC:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_VDEC_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_PIF:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_PIF_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_APM:
+ {
+ if ((index == 0)
+ && (!(capConfig1 & CAP_CONFIG1_APMA_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig1 & CAP_CONFIG1_APMB_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 2)
+ && (!(capConfig1 & CAP_CONFIG1_APMC_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_SPU:
+ {
+ if (!(capConfig2 & CAP_CONFIG2_SPU_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_PKA:
+ {
+ if (!(capConfig2 & CAP_CONFIG2_PKA_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_RNG:
+ {
+ if (!(capConfig2 & CAP_CONFIG2_RNG_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ default:
+ {
+ }
+ break;
+ }
+ return returnVal;
+}
+
+/****************************************************************************
+* cap_getMaxArmSpeedHz -
+*
+* PURPOSE:
+* Determines the maximum speed of the ARM CPU
+*
+* PARAMETERS:
+* none
+*
+* RETURNS:
+* clock speed in Hz that the ARM processor is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxArmSpeedHz(void)
+{
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+ return 500000000;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+ return 300000000;
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+ return 666666666;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+* cap_getMaxVpmSpeedHz -
+*
+* PURPOSE:
+* Determines the maximum speed of the VPM
+*
+* PARAMETERS:
+* none
+*
+* RETURNS:
+* clock speed in Hz that the VPM is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxVpmSpeedHz(void)
+{
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+ return 333333333;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+ return 200000000;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+* cap_getMaxLcdRes -
+*
+* PURPOSE:
+* Determines the maximum LCD resolution capabilities
+*
+* PARAMETERS:
+* none
+*
+* RETURNS:
+* CAP_LCD_WVGA, CAP_LCD_VGA, CAP_LCD_WQVGA or CAP_LCD_QVGA
+*
+****************************************************************************/
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void)
+{
+ return (CAP_LCD_RES_T)
+ ((capConfig1 & CAP_CONFIG1_CLCD_RES_MASK) >>
+ CAP_CONFIG1_CLCD_RES_SHIFT);
+}
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
new file mode 100644
index 000000000000..70eaea866cfe
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
@@ -0,0 +1,1123 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_DEF_H
+#define CHIPC_DEF_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+
+/* ---- Public Constants and Types ---------------------------------------- */
+
+/* Set 1 to configure DDR/VPM phase alignment by HW */
+#define chipcHw_DDR_HW_PHASE_ALIGN 0
+#define chipcHw_VPM_HW_PHASE_ALIGN 0
+
+typedef uint32_t chipcHw_freq;
+
+/* Configurable miscellaneous clocks */
+typedef enum {
+ chipcHw_CLOCK_DDR, /* DDR PHY Clock */
+ chipcHw_CLOCK_ARM, /* ARM Clock */
+ chipcHw_CLOCK_ESW, /* Ethernet Switch Clock */
+ chipcHw_CLOCK_VPM, /* VPM Clock */
+ chipcHw_CLOCK_ESW125, /* Ethernet MII Clock */
+ chipcHw_CLOCK_UART, /* UART Clock */
+ chipcHw_CLOCK_SDIO0, /* SDIO 0 Clock */
+ chipcHw_CLOCK_SDIO1, /* SDIO 1 Clock */
+ chipcHw_CLOCK_SPI, /* SPI Clock */
+ chipcHw_CLOCK_ETM, /* ARM ETM Clock */
+
+ chipcHw_CLOCK_BUS, /* BUS Clock */
+ chipcHw_CLOCK_OTP, /* OTP Clock */
+ chipcHw_CLOCK_I2C, /* I2C Host Clock */
+ chipcHw_CLOCK_I2S0, /* I2S 0 Host Clock */
+ chipcHw_CLOCK_RTBUS, /* DDR PHY Configuration Clock */
+ chipcHw_CLOCK_APM100, /* APM100 Clock */
+ chipcHw_CLOCK_TSC, /* Touch screen Clock */
+ chipcHw_CLOCK_LED, /* LED Clock */
+
+ chipcHw_CLOCK_USB, /* USB Clock */
+ chipcHw_CLOCK_LCD, /* LCD CLock */
+ chipcHw_CLOCK_APM, /* APM Clock */
+
+ chipcHw_CLOCK_I2S1, /* I2S 1 Host Clock */
+} chipcHw_CLOCK_e;
+
+/* System booting strap options */
+typedef enum {
+ chipcHw_BOOT_DEVICE_UART = chipcHw_STRAPS_BOOT_DEVICE_UART,
+ chipcHw_BOOT_DEVICE_SERIAL_FLASH =
+ chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH,
+ chipcHw_BOOT_DEVICE_NOR_FLASH_16 =
+ chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16,
+ chipcHw_BOOT_DEVICE_NAND_FLASH_8 =
+ chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8,
+ chipcHw_BOOT_DEVICE_NAND_FLASH_16 =
+ chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16
+} chipcHw_BOOT_DEVICE_e;
+
+/* System booting modes */
+typedef enum {
+ chipcHw_BOOT_MODE_NORMAL = chipcHw_STRAPS_BOOT_MODE_NORMAL,
+ chipcHw_BOOT_MODE_DBG_SW = chipcHw_STRAPS_BOOT_MODE_DBG_SW,
+ chipcHw_BOOT_MODE_DBG_BOOT = chipcHw_STRAPS_BOOT_MODE_DBG_BOOT,
+ chipcHw_BOOT_MODE_NORMAL_QUIET = chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET
+} chipcHw_BOOT_MODE_e;
+
+/* NAND Flash page size strap options */
+typedef enum {
+ chipcHw_NAND_PAGESIZE_512 = chipcHw_STRAPS_NAND_PAGESIZE_512,
+ chipcHw_NAND_PAGESIZE_2048 = chipcHw_STRAPS_NAND_PAGESIZE_2048,
+ chipcHw_NAND_PAGESIZE_4096 = chipcHw_STRAPS_NAND_PAGESIZE_4096,
+ chipcHw_NAND_PAGESIZE_EXT = chipcHw_STRAPS_NAND_PAGESIZE_EXT
+} chipcHw_NAND_PAGESIZE_e;
+
+/* GPIO Pin function */
+typedef enum {
+ chipcHw_GPIO_FUNCTION_KEYPAD = chipcHw_REG_GPIO_MUX_KEYPAD,
+ chipcHw_GPIO_FUNCTION_I2CH = chipcHw_REG_GPIO_MUX_I2CH,
+ chipcHw_GPIO_FUNCTION_SPI = chipcHw_REG_GPIO_MUX_SPI,
+ chipcHw_GPIO_FUNCTION_UART = chipcHw_REG_GPIO_MUX_UART,
+ chipcHw_GPIO_FUNCTION_LEDMTXP = chipcHw_REG_GPIO_MUX_LEDMTXP,
+ chipcHw_GPIO_FUNCTION_LEDMTXS = chipcHw_REG_GPIO_MUX_LEDMTXS,
+ chipcHw_GPIO_FUNCTION_SDIO0 = chipcHw_REG_GPIO_MUX_SDIO0,
+ chipcHw_GPIO_FUNCTION_SDIO1 = chipcHw_REG_GPIO_MUX_SDIO1,
+ chipcHw_GPIO_FUNCTION_PCM = chipcHw_REG_GPIO_MUX_PCM,
+ chipcHw_GPIO_FUNCTION_I2S = chipcHw_REG_GPIO_MUX_I2S,
+ chipcHw_GPIO_FUNCTION_ETM = chipcHw_REG_GPIO_MUX_ETM,
+ chipcHw_GPIO_FUNCTION_DEBUG = chipcHw_REG_GPIO_MUX_DEBUG,
+ chipcHw_GPIO_FUNCTION_MISC = chipcHw_REG_GPIO_MUX_MISC,
+ chipcHw_GPIO_FUNCTION_GPIO = chipcHw_REG_GPIO_MUX_GPIO
+} chipcHw_GPIO_FUNCTION_e;
+
+/* PIN Output slew rate */
+typedef enum {
+ chipcHw_PIN_SLEW_RATE_HIGH = chipcHw_REG_SLEW_RATE_HIGH,
+ chipcHw_PIN_SLEW_RATE_NORMAL = chipcHw_REG_SLEW_RATE_NORMAL
+} chipcHw_PIN_SLEW_RATE_e;
+
+/* PIN Current drive strength */
+typedef enum {
+ chipcHw_PIN_CURRENT_STRENGTH_2mA = chipcHw_REG_CURRENT_STRENGTH_2mA,
+ chipcHw_PIN_CURRENT_STRENGTH_4mA = chipcHw_REG_CURRENT_STRENGTH_4mA,
+ chipcHw_PIN_CURRENT_STRENGTH_6mA = chipcHw_REG_CURRENT_STRENGTH_6mA,
+ chipcHw_PIN_CURRENT_STRENGTH_8mA = chipcHw_REG_CURRENT_STRENGTH_8mA,
+ chipcHw_PIN_CURRENT_STRENGTH_10mA = chipcHw_REG_CURRENT_STRENGTH_10mA,
+ chipcHw_PIN_CURRENT_STRENGTH_12mA = chipcHw_REG_CURRENT_STRENGTH_12mA
+} chipcHw_PIN_CURRENT_STRENGTH_e;
+
+/* PIN Pull up register settings */
+typedef enum {
+ chipcHw_PIN_PULL_NONE = chipcHw_REG_PULL_NONE,
+ chipcHw_PIN_PULL_UP = chipcHw_REG_PULL_UP,
+ chipcHw_PIN_PULL_DOWN = chipcHw_REG_PULL_DOWN
+} chipcHw_PIN_PULL_e;
+
+/* PIN input type settings */
+typedef enum {
+ chipcHw_PIN_INPUTTYPE_CMOS = chipcHw_REG_INPUTTYPE_CMOS,
+ chipcHw_PIN_INPUTTYPE_ST = chipcHw_REG_INPUTTYPE_ST
+} chipcHw_PIN_INPUTTYPE_e;
+
+/* Allow/Disalow the support of spread spectrum */
+typedef enum {
+ chipcHw_SPREAD_SPECTRUM_DISALLOW, /* Spread spectrum support is not allowed */
+ chipcHw_SPREAD_SPECTRUM_ALLOW /* Spread spectrum support is allowed */
+} chipcHw_SPREAD_SPECTRUM_e;
+
+typedef struct {
+ chipcHw_SPREAD_SPECTRUM_e ssSupport; /* Allow/Disalow to support spread spectrum.
+ If supported, call chipcHw_enableSpreadSpectrum ()
+ to activate the spread spectrum with desired spread. */
+ uint32_t pllVcoFreqHz; /* PLL VCO frequency in Hz */
+ uint32_t pll2VcoFreqHz; /* PLL2 VCO frequency in Hz */
+ uint32_t busClockFreqHz; /* Bus clock frequency in Hz */
+ uint32_t armBusRatio; /* ARM clock : Bus clock */
+ uint32_t vpmBusRatio; /* VPM clock : Bus clock */
+ uint32_t ddrBusRatio; /* DDR clock : Bus clock */
+} chipcHw_INIT_PARAM_t;
+
+/* CHIP revision number */
+typedef enum {
+ chipcHw_REV_NUMBER_A0 = chipcHw_REG_REV_A0,
+ chipcHw_REV_NUMBER_B0 = chipcHw_REG_REV_B0
+} chipcHw_REV_NUMBER_e;
+
+typedef enum {
+ chipcHw_VPM_HW_PHASE_INTR_DISABLE = chipcHw_REG_VPM_INTR_DISABLE,
+ chipcHw_VPM_HW_PHASE_INTR_FAST = chipcHw_REG_VPM_INTR_FAST,
+ chipcHw_VPM_HW_PHASE_INTR_MEDIUM = chipcHw_REG_VPM_INTR_MEDIUM,
+ chipcHw_VPM_HW_PHASE_INTR_SLOW = chipcHw_REG_VPM_INTR_SLOW
+} chipcHw_VPM_HW_PHASE_INTR_e;
+
+typedef enum {
+ chipcHw_DDR_HW_PHASE_MARGIN_STRICT, /* Strict margin for DDR phase align condition */
+ chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM, /* Medium margin for DDR phase align condition */
+ chipcHw_DDR_HW_PHASE_MARGIN_WIDE /* Wider margin for DDR phase align condition */
+} chipcHw_DDR_HW_PHASE_MARGIN_e;
+
+typedef enum {
+ chipcHw_VPM_HW_PHASE_MARGIN_STRICT, /* Strict margin for VPM phase align condition */
+ chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM, /* Medium margin for VPM phase align condition */
+ chipcHw_VPM_HW_PHASE_MARGIN_WIDE /* Wider margin for VPM phase align condition */
+} chipcHw_VPM_HW_PHASE_MARGIN_e;
+
+#define chipcHw_XTAL_FREQ_Hz 25000000 /* Reference clock frequency in Hz */
+
+/* Programable pin defines */
+#define chipcHw_PIN_GPIO(n) ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
+ /* GPIO pin 0 - 60 */
+#define chipcHw_PIN_UARTTXD (chipcHw_GPIO_COUNT + 0) /* UART Transmit */
+#define chipcHw_PIN_NVI_A (chipcHw_GPIO_COUNT + 1) /* NVI Interface */
+#define chipcHw_PIN_NVI_D (chipcHw_GPIO_COUNT + 2) /* NVI Interface */
+#define chipcHw_PIN_NVI_OEB (chipcHw_GPIO_COUNT + 3) /* NVI Interface */
+#define chipcHw_PIN_NVI_WEB (chipcHw_GPIO_COUNT + 4) /* NVI Interface */
+#define chipcHw_PIN_NVI_CS (chipcHw_GPIO_COUNT + 5) /* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_CSB (chipcHw_GPIO_COUNT + 6) /* NVI Interface */
+#define chipcHw_PIN_NVI_FLASHWP (chipcHw_GPIO_COUNT + 7) /* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_RDYB (chipcHw_GPIO_COUNT + 8) /* NVI Interface */
+#define chipcHw_PIN_CL_DATA_0_17 (chipcHw_GPIO_COUNT + 9) /* LCD Data 0 - 17 */
+#define chipcHw_PIN_CL_DATA_18_20 (chipcHw_GPIO_COUNT + 10) /* LCD Data 18 - 20 */
+#define chipcHw_PIN_CL_DATA_21_23 (chipcHw_GPIO_COUNT + 11) /* LCD Data 21 - 23 */
+#define chipcHw_PIN_CL_POWER (chipcHw_GPIO_COUNT + 12) /* LCD Power */
+#define chipcHw_PIN_CL_ACK (chipcHw_GPIO_COUNT + 13) /* LCD Ack */
+#define chipcHw_PIN_CL_FP (chipcHw_GPIO_COUNT + 14) /* LCD FP */
+#define chipcHw_PIN_CL_LP (chipcHw_GPIO_COUNT + 15) /* LCD LP */
+#define chipcHw_PIN_UARTRXD (chipcHw_GPIO_COUNT + 16) /* UART Receive */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************/
+/**
+* @brief Initializes the clock module
+*
+*/
+/****************************************************************************/
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam /* [ IN ] Misc chip initialization parameter */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Enables the PLL1
+*
+* This function enables the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz, /* [ IN ] VCO frequency in Hz */
+ chipcHw_SPREAD_SPECTRUM_e ssSupport /* [ IN ] SS status */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Enables the PLL2
+*
+* This function enables the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz /* [ IN ] VCO frequency in Hz */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void);
+
+/****************************************************************************/
+/**
+* @brief Set clock fequency for miscellaneous configurable clocks
+*
+* This function sets clock frequency
+*
+* @return Configured clock frequency in KHz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Set clock fequency for miscellaneous configurable clocks
+*
+* This function sets clock frequency
+*
+* @return Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */
+ uint32_t freq /* [ IN ] Clock frequency in Hz */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Set VPM clock in sync with BUS clock
+*
+* This function does the phase adjustment between VPM and BUS clock
+*
+* @return >= 0 : On success ( # of adjustment required )
+* -1 : On failure
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void);
+
+/****************************************************************************/
+/**
+* @brief Enables core a clock of a certain device
+*
+* This function enables a core clock
+*
+* @return void
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disabled a core clock of a certain device
+*
+* This function disables a core clock
+*
+* @return void
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Enables bypass clock of a certain device
+*
+* This function enables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disabled bypass clock of a certain device
+*
+* This function disables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get Numeric Chip ID
+*
+* This function returns Chip ID that includes the revison number
+*
+* @return Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void);
+
+/****************************************************************************/
+/**
+* @brief Get Chip Product ID
+*
+* This function returns Chip Product ID
+*
+* @return Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void);
+
+/****************************************************************************/
+/**
+* @brief Get revision number
+*
+* This function returns revision number of the chip
+*
+* @return Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void);
+
+/****************************************************************************/
+/**
+* @brief Enables bus interface clock
+*
+* Enables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_BUS_CLOCK_XXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disables bus interface clock
+*
+* Disables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_BUS_CLOCK_XXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Enables various audio channels
+*
+* Enables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disables various audio channels
+*
+* Disables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Soft resets devices
+*
+* Soft resets various devices
+*
+* @return void
+*
+* @note use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+ );
+
+static inline void chipcHw_softResetDisable(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+ );
+
+static inline void chipcHw_softResetEnable(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configures misc CHIP functionality
+*
+* Configures CHIP functionality
+*
+* @return void
+*
+* @note use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+ );
+
+static inline void chipcHw_miscControlDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+ );
+
+static inline void chipcHw_miscControlEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set OTP options
+*
+* Set OTP options
+*
+* @return void
+*
+* @note use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_OTP_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get sticky bits
+*
+* @return Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void);
+
+/****************************************************************************/
+/**
+* @brief Set sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Clear sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get software override strap options
+*
+* Retrieves software override strap options
+*
+* @return Software override strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Set software override strap options
+*
+* set software override strap options
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions);
+
+/****************************************************************************/
+/**
+* @brief Get pin strap options
+*
+* Retrieves pin strap options
+*
+* @return Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Get valid pin strap options
+*
+* Retrieves valid pin strap options
+*
+* @return valid Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Initialize valid pin strap options
+*
+* Retrieves valid pin strap options by copying HW strap options to soft register
+* (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Get status (enabled/disabled) of bus interface clock
+*
+* This function returns the status of devices' bus interface clock
+*
+* @return Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void);
+
+/****************************************************************************/
+/**
+* @brief Get boot device
+*
+* This function returns the device type used in booting the system
+*
+* @return Boot device of type chipcHw_BOOT_DEVICE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void);
+
+/****************************************************************************/
+/**
+* @brief Get boot mode
+*
+* This function returns the way the system was booted
+*
+* @return Boot mode of type chipcHw_BOOT_MODE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void);
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash page size
+*
+* This function returns the NAND device page size
+*
+* @return Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void);
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash address cycle configuration
+*
+* This function returns the NAND flash address cycle configuration
+*
+* @return 0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void);
+
+/****************************************************************************/
+/**
+* @brief Activates PIF interface
+*
+* This function activates PIF interface by taking control of LCD pins
+*
+* @note
+* When activated, LCD pins will be defined as follows for PIF operation
+*
+* CLD[17:0] = pif_data[17:0]
+* CLD[23:18] = pif_address[5:0]
+* CLPOWER = pif_wr_str
+* CLCP = pif_rd_str
+* CLAC = pif_hat1
+* CLFP = pif_hrdy1
+* CLLP = pif_hat2
+* GPIO[42] = pif_hrdy2
+*
+* In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void);
+
+/****************************************************************************/
+/**
+* @brief Activates LCD interface
+*
+* This function activates LCD interface
+*
+* @note
+* When activated, LCD pins will be defined as follows
+*
+* CLD[17:0] = LCD data
+* CLD[23:18] = LCD data
+* CLPOWER = LCD power
+* CLCP =
+* CLAC = LCD ack
+* CLFP =
+* CLLP =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void);
+
+/****************************************************************************/
+/**
+* @brief Deactivates PIF/LCD interface
+*
+* This function deactivates PIF/LCD interface
+*
+* @note
+* When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void);
+
+/****************************************************************************/
+/**
+* @brief Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin /* GPIO Pin number */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin, /* GPIO Pin number */
+ chipcHw_GPIO_FUNCTION_e func /* Configuration function */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin slew rate
+*
+* This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_SLEW_RATE_e slewRate /* Pin slew rate */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin output drive current
+*
+* This function sets output drive current of individual pin
+*
+* Note: Avoid the use of the word 'current' since linux headers define this
+* to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_CURRENT_STRENGTH_e curr /* Pin current rating */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin pullup register
+*
+* This function sets pullup register of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_PULL_e pullup /* Pullup register settings */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin input type
+*
+* This function sets input type of individual Pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_INPUTTYPE_e inputType /* Pin input type */
+ );
+
+/****************************************************************************/
+/**
+* @brief Retrieves a string representation of the mux setting for a pin.
+*
+* @return Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin);
+
+/****************************************************************************/
+/** @brief issue warmReset
+ */
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask);
+
+/****************************************************************************/
+/** @brief clock reconfigure
+ */
+/****************************************************************************/
+void chipcHw_clockReconfig(uint32_t busHz, uint32_t armRatio, uint32_t vpmRatio,
+ uint32_t ddrRatio);
+
+/****************************************************************************/
+/**
+* @brief Enable Spread Spectrum
+*
+* @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**
+* @brief Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void);
+
+/****************************************************************************/
+/** @brief Checks if software strap is enabled
+ *
+ * @return 1 : When enable
+ * 0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void);
+
+/****************************************************************************/
+/** @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void);
+
+/****************************************************************************/
+/** @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void);
+
+/****************************************************************************/
+/** @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void);
+
+/****************************************************************************/
+/** @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void);
+
+/****************************************************************************/
+/** @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void);
+
+/****************************************************************************/
+/** @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void);
+
+/****************************************************************************/
+/** @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void);
+
+/****************************************************************************/
+/** @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void);
+
+/****************************************************************************/
+/** @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val);
+
+/****************************************************************************/
+/** @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val);
+
+/****************************************************************************/
+/** @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void);
+
+/****************************************************************************/
+/** @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void);
+
+/****************************************************************************/
+/**
+* @brief Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Set VPM SW phase alignment interrupt mode
+*
+* This function sets VPM phase alignment interrupt
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode);
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin /* Margin alinging DDR phase */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin /* Margin alinging VPM phase */
+ );
+
+/****************************************************************************/
+/**
+* @brief Checks DDR phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+* @brief Checks VPM phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void);
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void);
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle /* Timeout in bus cycle */
+ );
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle /* Timeout in bus cycle */
+ );
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void);
+
+/****************************************************************************/
+/**
+* @brief Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void);
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#endif /* CHIPC_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
new file mode 100644
index 000000000000..c78833acb37a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
@@ -0,0 +1,1673 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_INLINE_H
+#define CHIPC_INLINE_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_def.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+typedef enum {
+ chipcHw_OPTYPE_BYPASS, /* Bypass operation */
+ chipcHw_OPTYPE_OUTPUT /* Output operation */
+} chipcHw_OPTYPE_e;
+
+/* ---- Public Constants and Types ---------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------- */
+/* ---- Public Function Prototypes ---------------------------------------- */
+/* ---- Private Function Prototypes --------------------------------------- */
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+ chipcHw_OPTYPE_e type, int mode);
+
+/****************************************************************************/
+/**
+* @brief Get Numeric Chip ID
+*
+* This function returns Chip ID that includes the revison number
+*
+* @return Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void)
+{
+ return pChipcHw->ChipId;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable Spread Spectrum
+*
+* @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void)
+{
+ if ((pChipcHw->
+ PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+ ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
+ (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
+ (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
+ ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
+ ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
+ ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void)
+{
+ ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+}
+
+/****************************************************************************/
+/**
+* @brief Get Chip Product ID
+*
+* This function returns Chip Product ID
+*
+* @return Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void)
+{
+ return (pChipcHw->
+ ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
+ chipcHw_REG_CHIPID_BASE_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get revision number
+*
+* This function returns revision number of the chip
+*
+* @return Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
+{
+ return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Enables bus interface clock
+*
+* Enables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX for mask
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask)
+{
+ reg32_modify_or(&pChipcHw->BusIntfClock, mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Disables bus interface clock
+*
+* Disables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask)
+{
+ reg32_modify_and(&pChipcHw->BusIntfClock, ~mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Get status (enabled/disabled) of bus interface clock
+*
+* This function returns the status of devices' bus interface clock
+*
+* @return Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
+{
+ return pChipcHw->BusIntfClock;
+}
+
+/****************************************************************************/
+/**
+* @brief Enables various audio channels
+*
+* Enables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask)
+{
+ reg32_modify_or(&pChipcHw->AudioEnable, mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Disables various audio channels
+*
+* Disables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask)
+{
+ reg32_modify_and(&pChipcHw->AudioEnable, ~mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Soft resets devices
+*
+* Soft resets various devices
+*
+* @return void
+*
+* @note use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask)
+{
+ chipcHw_softResetEnable(mask);
+ chipcHw_softResetDisable(mask);
+}
+
+static inline void chipcHw_softResetDisable(uint64_t mask)
+{
+ uint32_t ctrl1 = (uint32_t) mask;
+ uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+ /* Deassert module soft reset */
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->SoftReset1 ^= ctrl1;
+ pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void chipcHw_softResetEnable(uint64_t mask)
+{
+ uint32_t ctrl1 = (uint32_t) mask;
+ uint32_t ctrl2 = (uint32_t) (mask >> 32);
+ uint32_t unhold = 0;
+
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->SoftReset1 |= ctrl1;
+ /* Mask out unhold request bits */
+ pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+
+ /* Process unhold requests */
+ if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
+ unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD;
+ }
+
+ if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) {
+ unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD;
+ }
+
+ if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) {
+ unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD;
+ }
+
+ if (unhold) {
+ /* Make sure unhold request is effective */
+ pChipcHw->SoftReset1 &= ~unhold;
+ }
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Configures misc CHIP functionality
+*
+* Configures CHIP functionality
+*
+* @return void
+*
+* @note use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask)
+{
+ reg32_write(&pChipcHw->MiscCtrl, mask);
+}
+
+static inline void chipcHw_miscControlDisable(uint32_t mask)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl, ~mask);
+}
+
+static inline void chipcHw_miscControlEnable(uint32_t mask)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl, mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Set OTP options
+*
+* Set OTP options
+*
+* @return void
+*
+* @note use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask)
+{
+ uint32_t ctrl1 = (uint32_t) mask;
+ uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+ reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1);
+ reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2);
+}
+
+/****************************************************************************/
+/**
+* @brief Get sticky bits
+*
+* @return Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void)
+{
+ return pChipcHw->Sticky;
+}
+
+/****************************************************************************/
+/**
+* @brief Set sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask)
+{
+ uint32_t bits = 0;
+
+ REG_LOCAL_IRQ_SAVE;
+ if (mask & chipcHw_REG_STICKY_POR_BROM) {
+ bits |= chipcHw_REG_STICKY_POR_BROM;
+ } else {
+ uint32_t sticky;
+ sticky = pChipcHw->Sticky;
+
+ if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+ && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
+ bits |= chipcHw_REG_STICKY_BOOT_DONE;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_1;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_2;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_3;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_4;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_5;
+ }
+ }
+ pChipcHw->Sticky = bits;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Clear sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask)
+{
+ uint32_t bits = 0;
+
+ REG_LOCAL_IRQ_SAVE;
+ if (mask &
+ (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
+ chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
+ chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
+ uint32_t sticky = pChipcHw->Sticky;
+
+ if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+ && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
+ bits = chipcHw_REG_STICKY_BOOT_DONE;
+ mask &= ~chipcHw_REG_STICKY_BOOT_DONE;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_1)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_1;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_1;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_2)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_2;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_2;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_3)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_3;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_3;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_4)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_4;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_4;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_5)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_5;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_5;
+ }
+ }
+ pChipcHw->Sticky = bits | mask;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Get software strap value
+*
+* Retrieves software strap value
+*
+* @return Software strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void)
+{
+ return pChipcHw->SoftStraps;
+}
+
+/****************************************************************************/
+/**
+* @brief Set software override strap options
+*
+* set software override strap options
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions)
+{
+ reg32_write(&pChipcHw->SoftStraps, strapOptions);
+}
+
+/****************************************************************************/
+/**
+* @brief Get Pin Strap Options
+*
+* This function returns the raw boot strap options
+*
+* @return strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void)
+{
+ return pChipcHw->PinStraps;
+}
+
+/****************************************************************************/
+/**
+* @brief Get Valid Strap Options
+*
+* This function returns the valid raw boot strap options
+*
+* @return strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void)
+{
+ uint32_t softStraps;
+
+ /*
+ ** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps
+ ** which copies HW straps to soft straps if there is no override
+ */
+ softStraps = chipcHw_getSoftStraps();
+
+ return softStraps;
+}
+
+/****************************************************************************/
+/**
+* @brief Initialize valid pin strap options
+*
+* Retrieves valid pin strap options by copying HW strap options to soft register
+* (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void)
+{
+ uint32_t softStraps;
+
+ REG_LOCAL_IRQ_SAVE;
+ softStraps = chipcHw_getSoftStraps();
+
+ if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) {
+ /* Copy HW straps to software straps */
+ chipcHw_setSoftStraps(chipcHw_getPinStraps());
+ }
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Get boot device
+*
+* This function returns the device type used in booting the system
+*
+* @return Boot device of type chipcHw_BOOT_DEVICE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void)
+{
+ return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Get boot mode
+*
+* This function returns the way the system was booted
+*
+* @return Boot mode of type chipcHw_BOOT_MODE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void)
+{
+ return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash page size
+*
+* This function returns the NAND device page size
+*
+* @return Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void)
+{
+ return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash address cycle configuration
+*
+* This function returns the NAND flash address cycle configuration
+*
+* @return 0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void)
+{
+ if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) {
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Activates PIF interface
+*
+* This function activates PIF interface by taking control of LCD pins
+*
+* @note
+* When activated, LCD pins will be defined as follows for PIF operation
+*
+* CLD[17:0] = pif_data[17:0]
+* CLD[23:18] = pif_address[5:0]
+* CLPOWER = pif_wr_str
+* CLCP = pif_rd_str
+* CLAC = pif_hat1
+* CLFP = pif_hrdy1
+* CLLP = pif_hat2
+* GPIO[42] = pif_hrdy2
+*
+* In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void)
+{
+ reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+* @brief Activates LCD interface
+*
+* This function activates LCD interface
+*
+* @note
+* When activated, LCD pins will be defined as follows
+*
+* CLD[17:0] = LCD data
+* CLD[23:18] = LCD data
+* CLPOWER = LCD power
+* CLCP =
+* CLAC = LCD ack
+* CLFP =
+* CLLP =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void)
+{
+ reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+* @brief Deactivates PIF/LCD interface
+*
+* This function deactivates PIF/LCD interface
+*
+* @note
+* When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void)
+{
+ reg32_write(&pChipcHw->LcdPifMode, 0);
+}
+
+/****************************************************************************/
+/**
+* @brief Select GE2
+*
+* This function select GE2 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE2(void)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+* @brief Select GE3
+*
+* This function select GE3 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE3(void)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+* @brief Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
+{
+ return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
+ (chipcHw_REG_GPIO_MUX_MASK <<
+ chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
+ chipcHw_REG_GPIO_MUX_POSITION(pin);
+}
+
+/****************************************************************************/
+/**
+* @brief Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,
+ chipcHw_GPIO_FUNCTION_e func)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &=
+ ~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |=
+ func << chipcHw_REG_GPIO_MUX_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin slew rate
+*
+* This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin,
+ chipcHw_PIN_SLEW_RATE_e slewRate)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &=
+ ~(chipcHw_REG_SLEW_RATE_MASK <<
+ chipcHw_REG_SLEW_RATE_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |=
+ (uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin output drive current
+*
+* This function sets output drive current of individual pin
+*
+* Note: Avoid the use of the word 'current' since linux headers define this
+* to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,
+ chipcHw_PIN_CURRENT_STRENGTH_e
+ curr)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_CURRENT(pin)) &=
+ ~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_CURRENT(pin)) |=
+ (uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin pullup register
+*
+* This function sets pullup register of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_PULLUP(pin)) &=
+ ~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_PULLUP(pin)) |=
+ (uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin input type
+*
+* This function sets input type of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,
+ chipcHw_PIN_INPUTTYPE_e inputType)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &=
+ ~(chipcHw_REG_INPUTTYPE_MASK <<
+ chipcHw_REG_INPUTTYPE_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |=
+ (uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Power up the USB PHY
+*
+* This function powers up the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerUpUsbPhy(void)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_POWERON);
+}
+
+/****************************************************************************/
+/**
+* @brief Power down the USB PHY
+*
+* This function powers down the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerDownUsbPhy(void)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_POWEROFF);
+}
+
+/****************************************************************************/
+/**
+* @brief Set the 2nd USB as host
+*
+* This function sets the 2nd USB as host
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbHost(void)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_MODE_HOST);
+}
+
+/****************************************************************************/
+/**
+* @brief Set the 2nd USB as device
+*
+* This function sets the 2nd USB as device
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbDevice(void)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE);
+}
+
+/****************************************************************************/
+/**
+* @brief Lower layer funtion to enable/disable a clock of a certain device
+*
+* This function enables/disables a core clock
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+ chipcHw_OPTYPE_e type, int mode)
+{
+ volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+ volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+
+ switch (clock) {
+ case chipcHw_CLOCK_DDR:
+ pPLLReg = &pChipcHw->DDRClock;
+ break;
+ case chipcHw_CLOCK_ARM:
+ pPLLReg = &pChipcHw->ARMClock;
+ break;
+ case chipcHw_CLOCK_ESW:
+ pPLLReg = &pChipcHw->ESWClock;
+ break;
+ case chipcHw_CLOCK_VPM:
+ pPLLReg = &pChipcHw->VPMClock;
+ break;
+ case chipcHw_CLOCK_ESW125:
+ pPLLReg = &pChipcHw->ESW125Clock;
+ break;
+ case chipcHw_CLOCK_UART:
+ pPLLReg = &pChipcHw->UARTClock;
+ break;
+ case chipcHw_CLOCK_SDIO0:
+ pPLLReg = &pChipcHw->SDIO0Clock;
+ break;
+ case chipcHw_CLOCK_SDIO1:
+ pPLLReg = &pChipcHw->SDIO1Clock;
+ break;
+ case chipcHw_CLOCK_SPI:
+ pPLLReg = &pChipcHw->SPIClock;
+ break;
+ case chipcHw_CLOCK_ETM:
+ pPLLReg = &pChipcHw->ETMClock;
+ break;
+ case chipcHw_CLOCK_USB:
+ pPLLReg = &pChipcHw->USBClock;
+ if (type == chipcHw_OPTYPE_OUTPUT) {
+ if (mode) {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ }
+ }
+ break;
+ case chipcHw_CLOCK_LCD:
+ pPLLReg = &pChipcHw->LCDClock;
+ if (type == chipcHw_OPTYPE_OUTPUT) {
+ if (mode) {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ }
+ }
+ break;
+ case chipcHw_CLOCK_APM:
+ pPLLReg = &pChipcHw->APMClock;
+ if (type == chipcHw_OPTYPE_OUTPUT) {
+ if (mode) {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ }
+ }
+ break;
+ case chipcHw_CLOCK_BUS:
+ pClockCtrl = &pChipcHw->ACLKClock;
+ break;
+ case chipcHw_CLOCK_OTP:
+ pClockCtrl = &pChipcHw->OTPClock;
+ break;
+ case chipcHw_CLOCK_I2C:
+ pClockCtrl = &pChipcHw->I2CClock;
+ break;
+ case chipcHw_CLOCK_I2S0:
+ pClockCtrl = &pChipcHw->I2S0Clock;
+ break;
+ case chipcHw_CLOCK_RTBUS:
+ pClockCtrl = &pChipcHw->RTBUSClock;
+ break;
+ case chipcHw_CLOCK_APM100:
+ pClockCtrl = &pChipcHw->APM100Clock;
+ break;
+ case chipcHw_CLOCK_TSC:
+ pClockCtrl = &pChipcHw->TSCClock;
+ break;
+ case chipcHw_CLOCK_LED:
+ pClockCtrl = &pChipcHw->LEDClock;
+ break;
+ case chipcHw_CLOCK_I2S1:
+ pClockCtrl = &pChipcHw->I2S1Clock;
+ break;
+ }
+
+ if (pPLLReg) {
+ switch (type) {
+ case chipcHw_OPTYPE_OUTPUT:
+ /* PLL clock output enable/disable */
+ if (mode) {
+ if (clock == chipcHw_CLOCK_DDR) {
+ /* DDR clock enable is inverted */
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ }
+ } else {
+ if (clock == chipcHw_CLOCK_DDR) {
+ /* DDR clock disable is inverted */
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ } else {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ }
+ }
+ break;
+ case chipcHw_OPTYPE_BYPASS:
+ /* PLL clock bypass enable/disable */
+ if (mode) {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+ } else {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+ }
+ break;
+ }
+ } else if (pClockCtrl) {
+ switch (type) {
+ case chipcHw_OPTYPE_OUTPUT:
+ if (mode) {
+ reg32_modify_or(pClockCtrl,
+ chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+ } else {
+ reg32_modify_and(pClockCtrl,
+ ~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+ }
+ break;
+ case chipcHw_OPTYPE_BYPASS:
+ if (mode) {
+ reg32_modify_or(pClockCtrl,
+ chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+ } else {
+ reg32_modify_and(pClockCtrl,
+ ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+ }
+ break;
+ }
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Disables a core clock of a certain device
+*
+* This function disables a core clock
+*
+* @note no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock)
+{
+
+ /* Disable output of the clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0);
+}
+
+/****************************************************************************/
+/**
+* @brief Enable a core clock of a certain device
+*
+* This function enables a core clock
+*
+* @note no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock)
+{
+
+ /* Enable output of the clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1);
+}
+
+/****************************************************************************/
+/**
+* @brief Enables bypass clock of a certain device
+*
+* This function enables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock)
+{
+ /* Enable bypass clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1);
+}
+
+/****************************************************************************/
+/**
+* @brief Disabled bypass clock of a certain device
+*
+* This function disables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock)
+{
+ /* Disable bypass clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0);
+
+}
+
+/****************************************************************************/
+/** @brief Checks if software strap is enabled
+ *
+ * @return 1 : When enable
+ * 0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void)
+{
+ return pChipcHw->SoftStraps & 0x00000001;
+}
+
+/****************************************************************************/
+/** @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void)
+{
+ reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001);
+}
+
+/****************************************************************************/
+/** @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void)
+{
+ reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001));
+}
+
+/****************************************************************************/
+/** @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void)
+{
+ reg32_modify_or(&pChipcHw->PLLConfig,
+ chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void)
+{
+ reg32_modify_or(&pChipcHw->PLLConfig2,
+ chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void)
+{
+ reg32_modify_and(&pChipcHw->PLLConfig,
+ ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void)
+{
+ reg32_modify_and(&pChipcHw->PLLConfig2,
+ ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void)
+{
+ return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/** @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void)
+{
+ return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/** @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+ pChipcHw->PLLConfig |=
+ (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/** @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val)
+{
+
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+ pChipcHw->PLLConfig2 |=
+ (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/** @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void)
+{
+ return (uint8_t) ((pChipcHw->
+ PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+ >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/** @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void)
+{
+ return (uint8_t) ((pChipcHw->
+ PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+ >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set VPM SW phase alignment interrupt mode
+*
+* This function sets VPM phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode)
+{
+ REG_LOCAL_IRQ_SAVE;
+ if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) {
+ pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+ } else {
+ pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+ }
+ pChipcHw->VPMPhaseCtrl2 =
+ (pChipcHw->
+ VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK <<
+ chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin)
+{
+ uint32_t ge = 0;
+ uint32_t le = 0;
+
+ switch (margin) {
+ case chipcHw_DDR_HW_PHASE_MARGIN_STRICT:
+ ge = 0x0F;
+ le = 0x0F;
+ break;
+ case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM:
+ ge = 0x03;
+ le = 0x3F;
+ break;
+ case chipcHw_DDR_HW_PHASE_MARGIN_WIDE:
+ ge = 0x01;
+ le = 0x7F;
+ break;
+ }
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+
+ pChipcHw->DDRPhaseCtrl1 &=
+ ~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK <<
+ chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+ || (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK <<
+ chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+ pChipcHw->DDRPhaseCtrl1 |=
+ ((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+ || (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+ REG_LOCAL_IRQ_RESTORE;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin)
+{
+ uint32_t ge = 0;
+ uint32_t le = 0;
+
+ switch (margin) {
+ case chipcHw_VPM_HW_PHASE_MARGIN_STRICT:
+ ge = 0x0F;
+ le = 0x0F;
+ break;
+ case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM:
+ ge = 0x03;
+ le = 0x3F;
+ break;
+ case chipcHw_VPM_HW_PHASE_MARGIN_WIDE:
+ ge = 0x01;
+ le = 0x7F;
+ break;
+ }
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+
+ pChipcHw->VPMPhaseCtrl1 &=
+ ~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK <<
+ chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+ || (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK <<
+ chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+ pChipcHw->VPMPhaseCtrl1 |=
+ ((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+ || (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+ REG_LOCAL_IRQ_RESTORE;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Checks DDR phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Checks VPM phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
+ chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
+ chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
+ chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
+ chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl2 &=
+ ~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK <<
+ chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT);
+ pChipcHw->DDRPhaseCtrl2 |=
+ (busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) <<
+ chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl2 &=
+ ~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK <<
+ chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT);
+ pChipcHw->VPMPhaseCtrl2 |=
+ (busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) <<
+ chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ /* Clear timeout interrupt service bit */
+ pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED;
+ pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ /* Clear timeout interrupt service bit */
+ pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED;
+ pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(); /* Recommended */
+ /* Enable timeout interrupt */
+ pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(); /* Recommended */
+ /* Enable timeout interrupt */
+ pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+#endif /* CHIPC_INLINE_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
new file mode 100644
index 000000000000..b162448f613c
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
@@ -0,0 +1,530 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file chipcHw_reg.h
+*
+* @brief Definitions for low level chip control registers
+*
+*/
+/****************************************************************************/
+#ifndef CHIPCHW_REG_H
+#define CHIPCHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <csp/reg.h>
+#include <mach/csp/ddrcReg.h>
+
+#define chipcHw_BASE_ADDRESS MM_IO_BASE_CHIPC
+
+typedef struct {
+ uint32_t ChipId; /* Chip ID */
+ uint32_t DDRClock; /* PLL1 Channel 1 for DDR clock */
+ uint32_t ARMClock; /* PLL1 Channel 2 for ARM clock */
+ uint32_t ESWClock; /* PLL1 Channel 3 for ESW system clock */
+ uint32_t VPMClock; /* PLL1 Channel 4 for VPM clock */
+ uint32_t ESW125Clock; /* PLL1 Channel 5 for ESW 125MHz clock */
+ uint32_t UARTClock; /* PLL1 Channel 6 for UART clock */
+ uint32_t SDIO0Clock; /* PLL1 Channel 7 for SDIO 0 clock */
+ uint32_t SDIO1Clock; /* PLL1 Channel 8 for SDIO 1 clock */
+ uint32_t SPIClock; /* PLL1 Channel 9 for SPI master Clock */
+ uint32_t ETMClock; /* PLL1 Channel 10 for ARM ETM Clock */
+
+ uint32_t ACLKClock; /* ACLK Clock (Divider) */
+ uint32_t OTPClock; /* OTP Clock (Divider) */
+ uint32_t I2CClock; /* I2C Clock (CK_13m) (Divider) */
+ uint32_t I2S0Clock; /* I2S0 Clock (Divider) */
+ uint32_t RTBUSClock; /* RTBUS (DDR PHY Config.) Clock (Divider) */
+ uint32_t pad1;
+ uint32_t APM100Clock; /* APM 100MHz CLK Clock (Divider) */
+ uint32_t TSCClock; /* TSC Clock (Divider) */
+ uint32_t LEDClock; /* LED Clock (Divider) */
+
+ uint32_t USBClock; /* PLL2 Channel 1 for USB clock */
+ uint32_t LCDClock; /* PLL2 Channel 2 for LCD clock */
+ uint32_t APMClock; /* PLL2 Channel 3 for APM 200 MHz clock */
+
+ uint32_t BusIntfClock; /* Bus interface clock */
+
+ uint32_t PLLStatus; /* PLL status register (PLL1) */
+ uint32_t PLLConfig; /* PLL configuration register (PLL1) */
+ uint32_t PLLPreDivider; /* PLL pre-divider control register (PLL1) */
+ uint32_t PLLDivider; /* PLL divider control register (PLL1) */
+ uint32_t PLLControl1; /* PLL analog control register #1 (PLL1) */
+ uint32_t PLLControl2; /* PLL analog control register #2 (PLL1) */
+
+ uint32_t I2S1Clock; /* I2S1 Clock */
+ uint32_t AudioEnable; /* Enable/ disable audio channel */
+ uint32_t SoftReset1; /* Reset blocks */
+ uint32_t SoftReset2; /* Reset blocks */
+ uint32_t Spare1; /* Phase align interrupts */
+ uint32_t Sticky; /* Sticky bits */
+ uint32_t MiscCtrl; /* Misc. control */
+ uint32_t pad3[3];
+
+ uint32_t PLLStatus2; /* PLL status register (PLL2) */
+ uint32_t PLLConfig2; /* PLL configuration register (PLL2) */
+ uint32_t PLLPreDivider2; /* PLL pre-divider control register (PLL2) */
+ uint32_t PLLDivider2; /* PLL divider control register (PLL2) */
+ uint32_t PLLControl12; /* PLL analog control register #1 (PLL2) */
+ uint32_t PLLControl22; /* PLL analog control register #2 (PLL2) */
+
+ uint32_t DDRPhaseCtrl1; /* DDR Clock Phase Alignment control1 */
+ uint32_t VPMPhaseCtrl1; /* VPM Clock Phase Alignment control1 */
+ uint32_t PhaseAlignStatus; /* DDR/VPM Clock Phase Alignment Status */
+ uint32_t PhaseCtrlStatus; /* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */
+ uint32_t DDRPhaseCtrl2; /* DDR Clock Phase Alignment control2 */
+ uint32_t VPMPhaseCtrl2; /* VPM Clock Phase Alignment control2 */
+ uint32_t pad4[9];
+
+ uint32_t SoftOTP1; /* Software OTP control */
+ uint32_t SoftOTP2; /* Software OTP control */
+ uint32_t SoftStraps; /* Software strap */
+ uint32_t PinStraps; /* Pin Straps */
+ uint32_t DiffOscCtrl; /* Diff oscillator control */
+ uint32_t DiagsCtrl; /* Diagnostic control */
+ uint32_t DiagsOutputCtrl; /* Diagnostic output enable */
+ uint32_t DiagsReadBackCtrl; /* Diagnostic read back control */
+
+ uint32_t LcdPifMode; /* LCD/PIF Pin Sharing MUX Mode */
+
+ uint32_t GpioMux_0_7; /* Pin Sharing MUX0 Control */
+ uint32_t GpioMux_8_15; /* Pin Sharing MUX1 Control */
+ uint32_t GpioMux_16_23; /* Pin Sharing MUX2 Control */
+ uint32_t GpioMux_24_31; /* Pin Sharing MUX3 Control */
+ uint32_t GpioMux_32_39; /* Pin Sharing MUX4 Control */
+ uint32_t GpioMux_40_47; /* Pin Sharing MUX5 Control */
+ uint32_t GpioMux_48_55; /* Pin Sharing MUX6 Control */
+ uint32_t GpioMux_56_63; /* Pin Sharing MUX7 Control */
+
+ uint32_t GpioSR_0_7; /* Slew rate for GPIO 0 - 7 */
+ uint32_t GpioSR_8_15; /* Slew rate for GPIO 8 - 15 */
+ uint32_t GpioSR_16_23; /* Slew rate for GPIO 16 - 23 */
+ uint32_t GpioSR_24_31; /* Slew rate for GPIO 24 - 31 */
+ uint32_t GpioSR_32_39; /* Slew rate for GPIO 32 - 39 */
+ uint32_t GpioSR_40_47; /* Slew rate for GPIO 40 - 47 */
+ uint32_t GpioSR_48_55; /* Slew rate for GPIO 48 - 55 */
+ uint32_t GpioSR_56_63; /* Slew rate for GPIO 56 - 63 */
+ uint32_t MiscSR_0_7; /* Slew rate for MISC 0 - 7 */
+ uint32_t MiscSR_8_15; /* Slew rate for MISC 8 - 15 */
+
+ uint32_t GpioPull_0_15; /* Pull up registers for GPIO 0 - 15 */
+ uint32_t GpioPull_16_31; /* Pull up registers for GPIO 16 - 31 */
+ uint32_t GpioPull_32_47; /* Pull up registers for GPIO 32 - 47 */
+ uint32_t GpioPull_48_63; /* Pull up registers for GPIO 48 - 63 */
+ uint32_t MiscPull_0_15; /* Pull up registers for MISC 0 - 15 */
+
+ uint32_t GpioInput_0_31; /* Input type for GPIO 0 - 31 */
+ uint32_t GpioInput_32_63; /* Input type for GPIO 32 - 63 */
+ uint32_t MiscInput_0_15; /* Input type for MISC 0 - 16 */
+} chipcHw_REG_t;
+
+#define pChipcHw ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS)
+#define pChipcPhysical ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC)
+
+#define chipcHw_REG_CHIPID_BASE_MASK 0xFFFFF000
+#define chipcHw_REG_CHIPID_BASE_SHIFT 12
+#define chipcHw_REG_CHIPID_REV_MASK 0x00000FFF
+#define chipcHw_REG_REV_A0 0xA00
+#define chipcHw_REG_REV_B0 0x0B0
+
+#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE 0x80000000 /* Allow controlling PLL registers */
+#define chipcHw_REG_PLL_STATUS_LOCKED 0x00000001 /* PLL is settled */
+#define chipcHw_REG_PLL_CONFIG_D_RESET 0x00000008 /* Digital reset */
+#define chipcHw_REG_PLL_CONFIG_A_RESET 0x00000004 /* Analog reset */
+#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE 0x00000020 /* Bypass enable */
+#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE 0x00000010 /* Output enable */
+#define chipcHw_REG_PLL_CONFIG_POWER_DOWN 0x00000001 /* Power down */
+#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ 1600000000 /* 1.6GHz VCO split frequency */
+#define chipcHw_REG_PLL_CONFIG_VCO_800_1600 0x00000000 /* VCO range 800-1600 MHz */
+#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200 0x00000080 /* VCO range 1601-3200 MHz */
+#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE 0x00010000 /* PLL test output enable */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK 0x003E0000 /* Mask to set test values */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT 17
+
+#define chipcHw_REG_PLL_CLOCK_PHASE_COMP 0x00800000 /* Phase comparator output */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK 0x00300000 /* Clock to bus ratio mask */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT 20 /* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_POWER_DOWN 0x00080000 /* PLL channel power down */
+#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO 0x00040000 /* Use GPIO as source */
+#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT 0x00020000 /* Select bypass clock */
+#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE 0x00010000 /* Clock gated ON */
+#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE 0x00008000 /* Clock phase update enable */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT 8 /* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK 0x00003F00 /* Phase control mask */
+#define chipcHw_REG_PLL_CLOCK_MDIV_MASK 0x000000FF /* Clock post divider mask
+
+ 00000000 = divide-by-256
+ 00000001 = divide-by-1
+ 00000010 = divide-by-2
+ 00000011 = divide-by-3
+ 00000100 = divide-by-4
+ 00000101 = divide-by-5
+ 00000110 = divide-by-6
+ .
+ .
+ 11111011 = divide-by-251
+ 11111100 = divide-by-252
+ 11111101 = divide-by-253
+ 11111110 = divide-by-254
+ */
+
+#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER 0x00040000 /* NON-PLL clock source select */
+#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT 0x00020000 /* NON-PLL clock bypass enable */
+#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE 0x00010000 /* NON-PLL clock output enable */
+#define chipcHw_REG_DIV_CLOCK_DIV_MASK 0x000000FF /* NON-PLL clock post-divide mask */
+#define chipcHw_REG_DIV_CLOCK_DIV_256 0x00000000 /* NON-PLL clock post-divide by 256 */
+
+#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT 0
+#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT 4
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT 8
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK 0x0001FF00
+#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN 0x02000000
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK 0x00700000 /* Divider mask */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER 0x00000000 /* Integer-N Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT 0x00100000 /* MASH Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT 0x00200000 /* MFB Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 0x00300000 /* MASH Sigma-Delta Modulator 1/8 Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8 0x00400000 /* MFB Sigma-Delta Modulator 1/8 Mode */
+
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco) ((vco) / chipcHw_XTAL_FREQ_Hz)
+#define chipcHw_REG_PLL_PREDIVIDER_P1 1
+#define chipcHw_REG_PLL_PREDIVIDER_P2 1
+
+#define chipcHw_REG_PLL_DIVIDER_M1DIV 0x03000000
+#define chipcHw_REG_PLL_DIVIDER_FRAC 0x00FFFFFF /* Fractional divider */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS (0x00FFFFFF) /* To attain spread with max frequency */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f 0 /* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f /
+ chipcHw_REG_PLL_DIVIDER_FRAC
+ = 0, when SS is disable
+ */
+
+#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz) ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz)))
+
+#define chipcHw_REG_ACLKClock_CLK_DIV_MASK 0x3
+
+/* System booting strap options */
+#define chipcHw_STRAPS_SOFT_OVERRIDE 0x00000001 /* Software Strap Override */
+
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8 0x00000000 /* 8 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16 0x00000002 /* 16 bit NOR FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH 0x00000004 /* Serial FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16 0x00000006 /* 16 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_UART 0x00000008 /* UART Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_MASK 0x0000000E /* Mask */
+
+/* System boot option */
+#define chipcHw_STRAPS_BOOT_OPTION_BROM 0x00000000 /* Boot from Boot ROM */
+#define chipcHw_STRAPS_BOOT_OPTION_ARAM 0x00000020 /* Boot from ARAM */
+#define chipcHw_STRAPS_BOOT_OPTION_NOR 0x00000030 /* Boot from NOR flash */
+
+/* NAND Flash page size strap options */
+#define chipcHw_STRAPS_NAND_PAGESIZE_512 0x00000000 /* NAND FLASH page size of 512 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_2048 0x00000040 /* NAND FLASH page size of 2048 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_4096 0x00000080 /* NAND FLASH page size of 4096 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_EXT 0x000000C0 /* NAND FLASH page of extened size */
+#define chipcHw_STRAPS_NAND_PAGESIZE_MASK 0x000000C0 /* Mask */
+
+#define chipcHw_STRAPS_NAND_EXTRA_CYCLE 0x00000400 /* NAND FLASH address cycle configuration */
+#define chipcHw_STRAPS_REBOOT_TO_UART 0x00000800 /* Reboot to UART on error */
+
+/* Secure boot mode strap options */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL 0x00000000 /* Normal Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_SW 0x00000100 /* Software debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT 0x00000200 /* Boot rom debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET 0x00000300 /* Normal Boot (Quiet BootRom) */
+#define chipcHw_STRAPS_BOOT_MODE_MASK 0x00000300 /* Mask */
+
+/* Slave Mode straps */
+#define chipcHw_STRAPS_I2CS 0x02000000 /* I2C Slave */
+#define chipcHw_STRAPS_SPIS 0x01000000 /* SPI Slave */
+
+/* Strap pin options */
+#define chipcHw_REG_SW_STRAPS ((pChipcHw->PinStraps & 0x0000FC00) >> 10)
+
+/* PIF/LCD pin sharing defines */
+#define chipcHw_REG_LCD_PIN_ENABLE 0x00000001 /* LCD Controller is used and the pins have LCD functions */
+#define chipcHw_REG_PIF_PIN_ENABLE 0x00000002 /* LCD pins are used to perform PIF functions */
+
+#define chipcHw_GPIO_COUNT 61 /* Number of GPIO pin accessible thorugh CHIPC */
+
+/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */
+#define chipcHw_REG_GPIO_MUX_KEYPAD 0x00000001 /* GPIO mux for Keypad */
+#define chipcHw_REG_GPIO_MUX_I2CH 0x00000002 /* GPIO mux for I2CH */
+#define chipcHw_REG_GPIO_MUX_SPI 0x00000003 /* GPIO mux for SPI */
+#define chipcHw_REG_GPIO_MUX_UART 0x00000004 /* GPIO mux for UART */
+#define chipcHw_REG_GPIO_MUX_LEDMTXP 0x00000005 /* GPIO mux for LEDMTXP */
+#define chipcHw_REG_GPIO_MUX_LEDMTXS 0x00000006 /* GPIO mux for LEDMTXS */
+#define chipcHw_REG_GPIO_MUX_SDIO0 0x00000007 /* GPIO mux for SDIO0 */
+#define chipcHw_REG_GPIO_MUX_SDIO1 0x00000008 /* GPIO mux for SDIO1 */
+#define chipcHw_REG_GPIO_MUX_PCM 0x00000009 /* GPIO mux for PCM */
+#define chipcHw_REG_GPIO_MUX_I2S 0x0000000A /* GPIO mux for I2S */
+#define chipcHw_REG_GPIO_MUX_ETM 0x0000000B /* GPIO mux for ETM */
+#define chipcHw_REG_GPIO_MUX_DEBUG 0x0000000C /* GPIO mux for DEBUG */
+#define chipcHw_REG_GPIO_MUX_MISC 0x0000000D /* GPIO mux for MISC */
+#define chipcHw_REG_GPIO_MUX_GPIO 0x00000000 /* GPIO mux for GPIO */
+#define chipcHw_REG_GPIO_MUX(pin) (&pChipcHw->GpioMux_0_7 + ((pin) >> 3))
+#define chipcHw_REG_GPIO_MUX_POSITION(pin) (((pin) & 0x00000007) << 2)
+#define chipcHw_REG_GPIO_MUX_MASK 0x0000000F /* Mask */
+
+#define chipcHw_REG_SLEW_RATE_HIGH 0x00000000 /* High speed slew rate */
+#define chipcHw_REG_SLEW_RATE_NORMAL 0x00000008 /* Normal slew rate */
+ /* Pins beyond 42 are defined by skipping 8 bits within the register */
+#define chipcHw_REG_SLEW_RATE(pin) (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_SLEW_RATE_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+#define chipcHw_REG_SLEW_RATE_MASK 0x00000008 /* Mask */
+
+#define chipcHw_REG_CURRENT_STRENGTH_2mA 0x00000001 /* Current driving strength 2 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_4mA 0x00000002 /* Current driving strength 4 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_6mA 0x00000004 /* Current driving strength 6 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_8mA 0x00000005 /* Current driving strength 8 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_10mA 0x00000006 /* Current driving strength 10 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_12mA 0x00000007 /* Current driving strength 12 milli ampere */
+#define chipcHw_REG_CURRENT_MASK 0x00000007 /* Mask */
+ /* Pins beyond 42 are defined by skipping 8 bits */
+#define chipcHw_REG_CURRENT(pin) (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_CURRENT_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+
+#define chipcHw_REG_PULL_NONE 0x00000000 /* No pull up register */
+#define chipcHw_REG_PULL_UP 0x00000001 /* Pull up register enable */
+#define chipcHw_REG_PULL_DOWN 0x00000002 /* Pull down register enable */
+#define chipcHw_REG_PULLUP_MASK 0x00000003 /* Mask */
+ /* Pins beyond 42 are defined by skipping 4 bits */
+#define chipcHw_REG_PULLUP(pin) (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4)))
+#define chipcHw_REG_PULLUP_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1))
+
+#define chipcHw_REG_INPUTTYPE_CMOS 0x00000000 /* Normal CMOS logic */
+#define chipcHw_REG_INPUTTYPE_ST 0x00000001 /* High speed Schmitt Trigger */
+#define chipcHw_REG_INPUTTYPE_MASK 0x00000001 /* Mask */
+ /* Pins beyond 42 are defined by skipping 2 bits */
+#define chipcHw_REG_INPUTTYPE(pin) (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5)))
+#define chipcHw_REG_INPUTTYPE_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F)))
+
+/* Device connected to the bus clock */
+#define chipcHw_REG_BUS_CLOCK_ARM 0x00000001 /* Bus interface clock for ARM */
+#define chipcHw_REG_BUS_CLOCK_VDEC 0x00000002 /* Bus interface clock for VDEC */
+#define chipcHw_REG_BUS_CLOCK_ARAM 0x00000004 /* Bus interface clock for ARAM */
+#define chipcHw_REG_BUS_CLOCK_HPM 0x00000008 /* Bus interface clock for HPM */
+#define chipcHw_REG_BUS_CLOCK_DDRC 0x00000010 /* Bus interface clock for DDRC */
+#define chipcHw_REG_BUS_CLOCK_DMAC0 0x00000020 /* Bus interface clock for DMAC0 */
+#define chipcHw_REG_BUS_CLOCK_DMAC1 0x00000040 /* Bus interface clock for DMAC1 */
+#define chipcHw_REG_BUS_CLOCK_NVI 0x00000080 /* Bus interface clock for NVI */
+#define chipcHw_REG_BUS_CLOCK_ESW 0x00000100 /* Bus interface clock for ESW */
+#define chipcHw_REG_BUS_CLOCK_GE 0x00000200 /* Bus interface clock for GE */
+#define chipcHw_REG_BUS_CLOCK_I2CH 0x00000400 /* Bus interface clock for I2CH */
+#define chipcHw_REG_BUS_CLOCK_I2S0 0x00000800 /* Bus interface clock for I2S0 */
+#define chipcHw_REG_BUS_CLOCK_I2S1 0x00001000 /* Bus interface clock for I2S1 */
+#define chipcHw_REG_BUS_CLOCK_VRAM 0x00002000 /* Bus interface clock for VRAM */
+#define chipcHw_REG_BUS_CLOCK_CLCD 0x00004000 /* Bus interface clock for CLCD */
+#define chipcHw_REG_BUS_CLOCK_LDK 0x00008000 /* Bus interface clock for LDK */
+#define chipcHw_REG_BUS_CLOCK_LED 0x00010000 /* Bus interface clock for LED */
+#define chipcHw_REG_BUS_CLOCK_OTP 0x00020000 /* Bus interface clock for OTP */
+#define chipcHw_REG_BUS_CLOCK_PIF 0x00040000 /* Bus interface clock for PIF */
+#define chipcHw_REG_BUS_CLOCK_SPU 0x00080000 /* Bus interface clock for SPU */
+#define chipcHw_REG_BUS_CLOCK_SDIO0 0x00100000 /* Bus interface clock for SDIO0 */
+#define chipcHw_REG_BUS_CLOCK_SDIO1 0x00200000 /* Bus interface clock for SDIO1 */
+#define chipcHw_REG_BUS_CLOCK_SPIH 0x00400000 /* Bus interface clock for SPIH */
+#define chipcHw_REG_BUS_CLOCK_SPIS 0x00800000 /* Bus interface clock for SPIS */
+#define chipcHw_REG_BUS_CLOCK_UART0 0x01000000 /* Bus interface clock for UART0 */
+#define chipcHw_REG_BUS_CLOCK_UART1 0x02000000 /* Bus interface clock for UART1 */
+#define chipcHw_REG_BUS_CLOCK_BBL 0x04000000 /* Bus interface clock for BBL */
+#define chipcHw_REG_BUS_CLOCK_I2CS 0x08000000 /* Bus interface clock for I2CS */
+#define chipcHw_REG_BUS_CLOCK_USBH 0x10000000 /* Bus interface clock for USB Host */
+#define chipcHw_REG_BUS_CLOCK_USBD 0x20000000 /* Bus interface clock for USB Device */
+#define chipcHw_REG_BUS_CLOCK_BROM 0x40000000 /* Bus interface clock for Boot ROM */
+#define chipcHw_REG_BUS_CLOCK_TSC 0x80000000 /* Bus interface clock for Touch screen */
+
+/* Software resets defines */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD 0x0000000080000000ULL /* Reset Global VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_HOLD 0x0000000040000000ULL /* Reset VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL 0x0000000020000000ULL /* Reset Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM 0x0000000010000000ULL /* Reset VPM */
+#define chipcHw_REG_SOFT_RESET_KEYPAD 0x0000000008000000ULL /* Reset Key pad */
+#define chipcHw_REG_SOFT_RESET_LED 0x0000000004000000ULL /* Reset LED */
+#define chipcHw_REG_SOFT_RESET_SPU 0x0000000002000000ULL /* Reset SPU */
+#define chipcHw_REG_SOFT_RESET_RNG 0x0000000001000000ULL /* Reset RNG */
+#define chipcHw_REG_SOFT_RESET_PKA 0x0000000000800000ULL /* Reset PKA */
+#define chipcHw_REG_SOFT_RESET_LCD 0x0000000000400000ULL /* Reset LCD */
+#define chipcHw_REG_SOFT_RESET_PIF 0x0000000000200000ULL /* Reset PIF */
+#define chipcHw_REG_SOFT_RESET_I2CS 0x0000000000100000ULL /* Reset I2C Slave */
+#define chipcHw_REG_SOFT_RESET_I2CH 0x0000000000080000ULL /* Reset I2C Host */
+#define chipcHw_REG_SOFT_RESET_SDIO1 0x0000000000040000ULL /* Reset SDIO 1 */
+#define chipcHw_REG_SOFT_RESET_SDIO0 0x0000000000020000ULL /* Reset SDIO 0 */
+#define chipcHw_REG_SOFT_RESET_BBL 0x0000000000010000ULL /* Reset BBL */
+#define chipcHw_REG_SOFT_RESET_I2S1 0x0000000000008000ULL /* Reset I2S1 */
+#define chipcHw_REG_SOFT_RESET_I2S0 0x0000000000004000ULL /* Reset I2S0 */
+#define chipcHw_REG_SOFT_RESET_SPIS 0x0000000000002000ULL /* Reset SPI Slave */
+#define chipcHw_REG_SOFT_RESET_SPIH 0x0000000000001000ULL /* Reset SPI Host */
+#define chipcHw_REG_SOFT_RESET_GPIO1 0x0000000000000800ULL /* Reset GPIO block 1 */
+#define chipcHw_REG_SOFT_RESET_GPIO0 0x0000000000000400ULL /* Reset GPIO block 0 */
+#define chipcHw_REG_SOFT_RESET_UART1 0x0000000000000200ULL /* Reset UART 1 */
+#define chipcHw_REG_SOFT_RESET_UART0 0x0000000000000100ULL /* Reset UART 0 */
+#define chipcHw_REG_SOFT_RESET_NVI 0x0000000000000080ULL /* Reset NVI */
+#define chipcHw_REG_SOFT_RESET_WDOG 0x0000000000000040ULL /* Reset Watch dog */
+#define chipcHw_REG_SOFT_RESET_TMR 0x0000000000000020ULL /* Reset Timer */
+#define chipcHw_REG_SOFT_RESET_ETM 0x0000000000000010ULL /* Reset ETM */
+#define chipcHw_REG_SOFT_RESET_ARM_HOLD 0x0000000000000008ULL /* Reset ARM and HOLD */
+#define chipcHw_REG_SOFT_RESET_ARM 0x0000000000000004ULL /* Reset ARM */
+#define chipcHw_REG_SOFT_RESET_CHIP_WARM 0x0000000000000002ULL /* Chip warm reset */
+#define chipcHw_REG_SOFT_RESET_CHIP_SOFT 0x0000000000000001ULL /* Chip soft reset */
+#define chipcHw_REG_SOFT_RESET_VDEC 0x0000100000000000ULL /* Video decoder */
+#define chipcHw_REG_SOFT_RESET_GE 0x0000080000000000ULL /* Graphics engine */
+#define chipcHw_REG_SOFT_RESET_OTP 0x0000040000000000ULL /* Reset OTP */
+#define chipcHw_REG_SOFT_RESET_USB2 0x0000020000000000ULL /* Reset USB2 */
+#define chipcHw_REG_SOFT_RESET_USB1 0x0000010000000000ULL /* Reset USB 1 */
+#define chipcHw_REG_SOFT_RESET_USB 0x0000008000000000ULL /* Reset USB 1 and USB2 soft reset */
+#define chipcHw_REG_SOFT_RESET_ESW 0x0000004000000000ULL /* Reset Ethernet switch */
+#define chipcHw_REG_SOFT_RESET_ESWCLK 0x0000002000000000ULL /* Reset Ethernet switch clock */
+#define chipcHw_REG_SOFT_RESET_DDRPHY 0x0000001000000000ULL /* Reset DDR Physical */
+#define chipcHw_REG_SOFT_RESET_DDR 0x0000000800000000ULL /* Reset DDR Controller */
+#define chipcHw_REG_SOFT_RESET_TSC 0x0000000400000000ULL /* Reset Touch screen */
+#define chipcHw_REG_SOFT_RESET_PCM 0x0000000200000000ULL /* Reset PCM device */
+#define chipcHw_REG_SOFT_RESET_APM 0x0000200100000000ULL /* Reset APM device */
+
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD 0x8000000000000000ULL /* Unhold Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD 0x4000000000000000ULL /* Unhold VPM */
+#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD 0x2000000000000000ULL /* Unhold ARM reset */
+#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK 0xF000000000000000ULL /* Mask to handle unhold request */
+
+/* Audio channel control defines */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL 0x00000001 /* Enable all audio channel */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A 0x00000002 /* Enable channel A */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B 0x00000004 /* Enable channel B */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C 0x00000008 /* Enable channel C */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK 0x00000010 /* Enable NTP clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK 0x00000020 /* Enable PCM0 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK 0x00000040 /* Enable PCM1 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK 0x00000080 /* Enable APM clock */
+
+/* Misc. chip control defines */
+#define chipcHw_REG_MISC_CTRL_GE_SEL 0x00040000 /* Select GE2/GE3 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP 0x00000000 /* Use on chip clock for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO 0x00020000 /* Use external clock via GPIO pin 26 for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP 0x00000000 /* Use on chip clock for I2S0 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO 0x00010000 /* Use external clock via GPIO pin 45 for I2S0 */
+#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE 0x00008000 /* Disable ARM CP15 bit */
+#define chipcHw_REG_MISC_CTRL_RTC_DISABLE 0x00000008 /* Disable RTC registers */
+#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE 0x00000004 /* Disable Battery Backed RAM */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST 0x00000002 /* Set USB as host */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE 0xFFFFFFFD /* Set USB as device */
+#define chipcHw_REG_MISC_CTRL_USB_POWERON 0xFFFFFFFE /* Power up USB */
+#define chipcHw_REG_MISC_CTRL_USB_POWEROFF 0x00000001 /* Power down USB */
+
+/* OTP configuration defines */
+#define chipcHw_REG_OTP_SECURITY_OFF 0x0000020000000000ULL /* Security support is OFF */
+#define chipcHw_REG_OTP_SPU_SLOW 0x0000010000000000ULL /* Limited SPU throughput */
+#define chipcHw_REG_OTP_LCD_SPEED 0x0000000600000000ULL /* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_1 0x0000000100000000ULL /* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_0 0x0000000080000000ULL /* Set VPM speed zero */
+#define chipcHw_REG_OTP_AXI_SPEED 0x0000000060000000ULL /* Set maximum AXI bus speed */
+#define chipcHw_REG_OTP_APM_DISABLE 0x000000001F000000ULL /* Disable APM */
+#define chipcHw_REG_OTP_PIF_DISABLE 0x0000000000200000ULL /* Disable PIF */
+#define chipcHw_REG_OTP_VDEC_DISABLE 0x0000000000100000ULL /* Disable Video decoder */
+#define chipcHw_REG_OTP_BBL_DISABLE 0x0000000000080000ULL /* Disable RTC and BBRAM */
+#define chipcHw_REG_OTP_LED_DISABLE 0x0000000000040000ULL /* Disable LED */
+#define chipcHw_REG_OTP_GE_DISABLE 0x0000000000020000ULL /* Disable Graphics Engine */
+#define chipcHw_REG_OTP_LCD_DISABLE 0x0000000000010000ULL /* Disable LCD */
+#define chipcHw_REG_OTP_KEYPAD_DISABLE 0x0000000000008000ULL /* Disable keypad */
+#define chipcHw_REG_OTP_UART_DISABLE 0x0000000000004000ULL /* Disable UART */
+#define chipcHw_REG_OTP_SDIOH_DISABLE 0x0000000000003000ULL /* Disable SDIO host */
+#define chipcHw_REG_OTP_HSS_DISABLE 0x0000000000000C00ULL /* Disable HSS */
+#define chipcHw_REG_OTP_TSC_DISABLE 0x0000000000000200ULL /* Disable touch screen */
+#define chipcHw_REG_OTP_USB_DISABLE 0x0000000000000180ULL /* Disable USB */
+#define chipcHw_REG_OTP_SGMII_DISABLE 0x0000000000000060ULL /* Disable SGMII */
+#define chipcHw_REG_OTP_ETH_DISABLE 0x0000000000000018ULL /* Disable gigabit ethernet */
+#define chipcHw_REG_OTP_ETH_PHY_DISABLE 0x0000000000000006ULL /* Disable ethernet PHY */
+#define chipcHw_REG_OTP_VPM_DISABLE 0x0000000000000001ULL /* Disable VPM */
+
+/* Sticky bit defines */
+#define chipcHw_REG_STICKY_BOOT_DONE 0x00000001 /* Boot done */
+#define chipcHw_REG_STICKY_SOFT_RESET 0x00000002 /* ARM soft reset */
+#define chipcHw_REG_STICKY_GENERAL_1 0x00000004 /* General purpose bit 1 */
+#define chipcHw_REG_STICKY_GENERAL_2 0x00000008 /* General purpose bit 2 */
+#define chipcHw_REG_STICKY_GENERAL_3 0x00000010 /* General purpose bit 3 */
+#define chipcHw_REG_STICKY_GENERAL_4 0x00000020 /* General purpose bit 4 */
+#define chipcHw_REG_STICKY_GENERAL_5 0x00000040 /* General purpose bit 5 */
+#define chipcHw_REG_STICKY_POR_BROM 0x00000080 /* Special sticky bit for security - set in BROM to avoid other modes being entered */
+#define chipcHw_REG_STICKY_ARM_RESET 0x00000100 /* ARM reset */
+#define chipcHw_REG_STICKY_CHIP_SOFT_RESET 0x00000200 /* Chip soft reset */
+#define chipcHw_REG_STICKY_CHIP_WARM_RESET 0x00000400 /* Chip warm reset */
+#define chipcHw_REG_STICKY_WDOG_RESET 0x00000800 /* Watchdog reset */
+#define chipcHw_REG_STICKY_OTP_RESET 0x00001000 /* OTP reset */
+
+ /* HW phase alignment defines *//* Spare1 register definitions */
+#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE 0x80000000 /* Enable DDR phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE 0x40000000 /* Enable VPM phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE 0x00000002 /* Enable access to VPM using system BUS */
+#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE 0x00000001 /* Enable access to DDR using system BUS */
+ /* DDRPhaseCtrl1 register definitions */
+#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE 0x80000000 /* Enable DDR SW phase alignment */
+#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE 0x40000000 /* Enable DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK 0x0000007F /* DDR lower threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT 23
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK 0x0000007F /* DDR upper threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT 16
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK 0x0000FFFF /* BUS Cycle to wait to run next DDR phase alignment */
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT 0
+ /* VPMPhaseCtrl1 register definitions */
+#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE 0x80000000 /* Enable VPM SW phase alignment */
+#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE 0x40000000 /* Enable VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK 0x0000007F /* VPM lower threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT 23
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK 0x0000007F /* VPM upper threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT 16
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK 0x0000FFFF /* BUS Cycle to wait to complete the VPM phase alignment */
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT 0
+ /* PhaseAlignStatus register definitions */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS 0x80000000 /* DDR time out interrupt status */
+#define chipcHw_REG_DDR_PHASE_STATUS_MASK 0x0000007F /* DDR phase status value */
+#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT 24
+#define chipcHw_REG_DDR_PHASE_ALIGNED 0x00800000 /* DDR Phase aligned status */
+#define chipcHw_REG_DDR_LOAD 0x00400000 /* Load DDR phase status */
+#define chipcHw_REG_DDR_PHASE_CTRL_MASK 0x0000003F /* DDR phase control value */
+#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT 16
+#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS 0x80000000 /* VPM time out interrupt status */
+#define chipcHw_REG_VPM_PHASE_STATUS_MASK 0x0000007F /* VPM phase status value */
+#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT 8
+#define chipcHw_REG_VPM_PHASE_ALIGNED 0x00000080 /* VPM Phase aligned status */
+#define chipcHw_REG_VPM_LOAD 0x00000040 /* Load VPM phase status */
+#define chipcHw_REG_VPM_PHASE_CTRL_MASK 0x0000003F /* VPM phase control value */
+#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT 0
+ /* DDRPhaseCtrl2 register definitions */
+#define chipcHw_REG_DDR_INTR_SERVICED 0x02000000 /* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE 0x01000000 /* Enable time out interrupt */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK 0x0000000F /* Wait before toggling load_ch */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT 20
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK 0x0000000F /* Total wait to settle ph_ctrl and load_ch */
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT 16
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK 0x0000FFFF /* Time out value for DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT 0
+ /* VPMPhaseCtrl2 register definitions */
+#define chipcHw_REG_VPM_INTR_SELECT_MASK 0x00000003 /* Interrupt select */
+#define chipcHw_REG_VPM_INTR_SELECT_SHIFT 26
+#define chipcHw_REG_VPM_INTR_DISABLE 0x00000000
+#define chipcHw_REG_VPM_INTR_FAST (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_MEDIUM (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SLOW (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SERVICED 0x02000000 /* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE 0x01000000 /* Enable time out interrupt */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK 0x0000000F /* Wait before toggling load_ch */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT 20
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK 0x0000000F /* Total wait cycle to settle ph_ctrl and load_ch */
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT 16
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK 0x0000FFFF /* Time out value for VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT 0
+
+#endif /* CHIPCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
new file mode 100644
index 000000000000..f1b68e26fa6d
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
@@ -0,0 +1,872 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file ddrcReg.h
+*
+* @brief Register definitions for BCMRING DDR2 Controller and PHY
+*
+*/
+/****************************************************************************/
+
+#ifndef DDRC_REG_H
+#define DDRC_REG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/reg.h>
+#include <csp/stdint.h>
+
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*********************************************************************/
+/* DDR2 Controller (ARM PL341) register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 DDR2 configuration registers, offset 0x000 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+ typedef struct {
+ uint32_t memcStatus;
+ uint32_t memcCmd;
+ uint32_t directCmd;
+ uint32_t memoryCfg;
+ uint32_t refreshPrd;
+ uint32_t casLatency;
+ uint32_t writeLatency;
+ uint32_t tMrd;
+ uint32_t tRas;
+ uint32_t tRc;
+ uint32_t tRcd;
+ uint32_t tRfc;
+ uint32_t tRp;
+ uint32_t tRrd;
+ uint32_t tWr;
+ uint32_t tWtr;
+ uint32_t tXp;
+ uint32_t tXsr;
+ uint32_t tEsr;
+ uint32_t memoryCfg2;
+ uint32_t memoryCfg3;
+ uint32_t tFaw;
+ } ddrcReg_CTLR_MEMC_REG_t;
+
+#define ddrcReg_CTLR_MEMC_REG_OFFSET 0x0000
+#define ddrcReg_CTLR_MEMC_REGP ((volatile ddrcReg_CTLR_MEMC_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_MEMC_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_MASK (0x3 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_4 (0x0 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_8 (0x3 << 12)
+
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_MASK (0x3 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_0 (0x0 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_1 (0x1 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_2 (0x2 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_4 (0x3 << 10)
+
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_MASK (0x3 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_1 (0x0 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_2 (0x1 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_3 (0x2 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_4 (0x3 << 7)
+
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_MASK (0x7 << 4)
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_DDR2 (0x5 << 4)
+
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_MASK (0x3 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_16 (0x0 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_32 (0x1 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_64 (0x2 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_128 (0x3 << 2)
+
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_MASK (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_CONFIG (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_READY (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_PAUSED (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_LOWPWR (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_CMD_MASK (0x7 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_GO (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_SLEEP (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_WAKEUP (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_PAUSE (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_CONFIGURE (0x4 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_ACTIVE_PAUSE (0x7 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT 20
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_MASK (0x3 << ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_PRECHARGEALL (0x0 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_AUTOREFRESH (0x1 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_MODEREG (0x2 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_NOP (0x3 << 18)
+
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT 16
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_MASK (0x3 << ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT 0
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_MASK (0x1ffff << ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_MASK (0x3 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_1 (0x0 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_2 (0x1 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_3 (0x2 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_4 (0x3 << 21)
+
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_MASK (0x7 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_3_0 (0x0 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_4_1 (0x1 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_5_2 (0x2 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_6_3 (0x3 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_7_4 (0x4 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_8_5 (0x5 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_9_6 (0x6 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_10_7 (0x7 << 18)
+
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_MASK (0x7 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_4 (0x2 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_8 (0x3 << 15) /* @note Not supported in PL341 */
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_ENABLE (0x1 << 13)
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT 7
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_MASK (0x3f << ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_MASK (0x7 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_11 (0x0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_12 (0x1 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_13 (0x2 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_14 (0x3 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_15 (0x4 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_16 (0x5 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_MASK (0x7 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_9 (0x1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_10 (0x2 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_11 (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_REFRESH_PRD_SHIFT 0
+#define ddrcReg_CTLR_REFRESH_PRD_MASK (0x7fff << ddrcReg_CTLR_REFRESH_PRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CAS_LATENCY_SHIFT 1
+#define ddrcReg_CTLR_CAS_LATENCY_MASK (0x7 << ddrcReg_CTLR_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_WRITE_LATENCY_SHIFT 0
+#define ddrcReg_CTLR_WRITE_LATENCY_MASK (0x7 << ddrcReg_CTLR_WRITE_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_MRD_SHIFT 0
+#define ddrcReg_CTLR_T_MRD_MASK (0x7f << ddrcReg_CTLR_T_MRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RAS_SHIFT 0
+#define ddrcReg_CTLR_T_RAS_MASK (0x1f << ddrcReg_CTLR_T_RAS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RC_SHIFT 0
+#define ddrcReg_CTLR_T_RC_MASK (0x1f << ddrcReg_CTLR_T_RC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_MASK (0x7 << ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RCD_SHIFT 0
+#define ddrcReg_CTLR_T_RCD_MASK (0x7 << ddrcReg_CTLR_T_RCD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_MASK (0x7f << ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RFC_SHIFT 0
+#define ddrcReg_CTLR_T_RFC_MASK (0x7f << ddrcReg_CTLR_T_RFC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_MASK (0x7 << ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RP_SHIFT 0
+#define ddrcReg_CTLR_T_RP_MASK (0xf << ddrcReg_CTLR_T_RP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RRD_SHIFT 0
+#define ddrcReg_CTLR_T_RRD_MASK (0xf << ddrcReg_CTLR_T_RRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WR_SHIFT 0
+#define ddrcReg_CTLR_T_WR_MASK (0x7 << ddrcReg_CTLR_T_WR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WTR_SHIFT 0
+#define ddrcReg_CTLR_T_WTR_MASK (0x7 << ddrcReg_CTLR_T_WTR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XP_SHIFT 0
+#define ddrcReg_CTLR_T_XP_MASK (0xff << ddrcReg_CTLR_T_XP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XSR_SHIFT 0
+#define ddrcReg_CTLR_T_XSR_MASK (0xff << ddrcReg_CTLR_T_XSR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_ESR_SHIFT 0
+#define ddrcReg_CTLR_T_ESR_MASK (0xff << ddrcReg_CTLR_T_ESR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_MASK (0x3 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_16BITS (0 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_32BITS (1 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_64BITS (2 << 6)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_MASK (0x3 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_2 (0 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_3 (3 << 4)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_LOW (0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_HIGH (1 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_LOW (0 << 2)
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_HIGH (1 << 2)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_MASK (0x3 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_ASYNC (0 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_LE_M (1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_GT_M (3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT 0
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_MASK (0x7 << ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_MASK (0x1f << ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_FAW_PERIOD_SHIFT 0
+#define ddrcReg_CTLR_T_FAW_PERIOD_MASK (0x1f << ddrcReg_CTLR_T_FAW_PERIOD_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 AXI ID QOS configuration registers, offset 0x100 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CNT 16
+#define ddrcReg_CTLR_QOS_MAX (ddrcReg_CTLR_QOS_CNT - 1)
+
+ typedef struct {
+ uint32_t cfg[ddrcReg_CTLR_QOS_CNT];
+ } ddrcReg_CTLR_QOS_REG_t;
+
+#define ddrcReg_CTLR_QOS_REG_OFFSET 0x100
+#define ddrcReg_CTLR_QOS_REGP ((volatile ddrcReg_CTLR_QOS_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_QOS_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CFG_MAX_SHIFT 2
+#define ddrcReg_CTLR_QOS_CFG_MAX_MASK (0xff << ddrcReg_CTLR_QOS_CFG_MAX_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_MIN_SHIFT 1
+#define ddrcReg_CTLR_QOS_CFG_MIN_MASK (1 << ddrcReg_CTLR_QOS_CFG_MIN_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_ENABLE (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 Memory chip configuration registers, offset 0x200 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CNT 4
+#define ddrcReg_CTLR_CHIP_MAX (ddrcReg_CTLR_CHIP_CNT - 1)
+
+ typedef struct {
+ uint32_t cfg[ddrcReg_CTLR_CHIP_CNT];
+ } ddrcReg_CTLR_CHIP_REG_t;
+
+#define ddrcReg_CTLR_CHIP_REG_OFFSET 0x200
+#define ddrcReg_CTLR_CHIP_REGP ((volatile ddrcReg_CTLR_CHIP_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_CHIP_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_MASK (1 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_ROW_BANK_COL (0 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_BANK_ROW_COL (1 << 16)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT 8
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_MASK (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT 0
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_MASK (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 User configuration registers, offset 0x300 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CNT 2
+
+ typedef struct {
+ uint32_t input;
+ uint32_t output[ddrcReg_CTLR_USER_OUTPUT_CNT];
+ uint32_t feature;
+ } ddrcReg_CTLR_USER_REG_t;
+
+#define ddrcReg_CTLR_USER_REG_OFFSET 0x300
+#define ddrcReg_CTLR_USER_REGP ((volatile ddrcReg_CTLR_USER_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_USER_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT 0
+#define ddrcReg_CTLR_USER_INPUT_STATUS_MASK (0xff << ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT 0
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_MASK (0xff << ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT)
+
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT 1
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_MASK (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_BP134 (0 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301 (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_FEATURE_WRITE_BLOCK_DISABLE (1 << 2)
+#define ddrcReg_CTLR_FEATURE_EARLY_BURST_RSP_DISABLE (1 << 0)
+
+/*********************************************************************/
+/* Broadcom DDR23 PHY register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Address and Control register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+ typedef struct {
+ uint32_t revision;
+ uint32_t pmCtl;
+ REG32_RSVD(0x0008, 0x0010);
+ uint32_t pllStatus;
+ uint32_t pllCfg;
+ uint32_t pllPreDiv;
+ uint32_t pllDiv;
+ uint32_t pllCtl1;
+ uint32_t pllCtl2;
+ uint32_t ssCtl;
+ uint32_t ssCfg;
+ uint32_t vdlStatic;
+ uint32_t vdlDynamic;
+ uint32_t padIdle;
+ uint32_t pvtComp;
+ uint32_t padDrive;
+ uint32_t clkRgltrCtl;
+ } ddrcReg_PHY_ADDR_CTL_REG_t;
+
+#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET 0x0400
+#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
+
+/* @todo These SS definitions are duplicates of ones below */
+
+#define ddrcReg_PHY_ADDR_SS_CTRL_ENABLE 0x00000001
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_MASK 0xFFFF0000
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT 16
+#define ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK 10 /* Higher the value, lower the SS modulation frequency */
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_MASK 0x0000FFFF
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT 0
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_MASK (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_MASK (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_PM_CTL_DDR_CLK_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_STATUS_LOCKED (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_DIV2_CLK_RESET (1 << 31)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT 17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_VCO_RNG (1 << 7)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CH1_PWRDWN (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BYPASS_ENABLE (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CLKOUT_ENABLE (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_D_RESET (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_A_RESET (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_PWRDWN (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_DITHER_MFB (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_PWRDWN (1 << 25)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT 20
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_MASK (0x1ff << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT 4
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT 24
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_MASK (0xff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_MASK (0xffffff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT 30
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT 27
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT 24
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT 22
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LF_ORDER (0x1 << 21)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT 19
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT 17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT 15
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT 13
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT 10
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT 5
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT 4
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT 2
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_LOWCUR_ENABLE (0x1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_BIASIN_ENABLE (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_EN_ENABLE (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT 16
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_MASK (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_MASK (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FORCE (1 << 20)
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_MASK (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_MASK (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_ENABLE (1u << 31)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_RXENB_DISABLE (1 << 8)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_IDDQ_DISABLE (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_REB_DISABLE (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_OEB_DISABLE (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_IDDQ_DISABLE (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_REB_DISABLE (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_OEB_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_DONE (1 << 30)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_DONE (1 << 29)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_DONE (1 << 28)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_AUTO_ENABLE (1 << 27)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_ENABLE (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_OVR_ENABLE (1 << 25)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_OVR_ENABLE (1 << 24)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT 20
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT 16
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT 4
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_RT60B (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SEL_SSTL18 (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELTXDRV_CI (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELRXDRV (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SLEW (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_HALF (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_OFF (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Byte Lane register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CNT 2
+#define ddrcReg_PHY_BYTE_LANE_MAX (ddrcReg_CTLR_BYTE_LANE_CNT - 1)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT 8
+
+ typedef struct {
+ uint32_t revision;
+ uint32_t vdlCalibrate;
+ uint32_t vdlStatus;
+ REG32_RSVD(0x000c, 0x0010);
+ uint32_t vdlOverride[ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT];
+ uint32_t readCtl;
+ uint32_t readStatus;
+ uint32_t readClear;
+ uint32_t padIdleCtl;
+ uint32_t padDriveCtl;
+ uint32_t padClkCtl;
+ uint32_t writeCtl;
+ uint32_t clkRegCtl;
+ } ddrcReg_PHY_BYTE_LANE_REG_t;
+
+/* There are 2 instances of the byte Lane registers, one for each byte lane. */
+#define ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET 0x0500
+#define ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET 0x0600
+
+#define ddrcReg_PHY_BYTE_LANE_1_REGP ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET))
+#define ddrcReg_PHY_BYTE_LANE_2_REGP ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_MASK (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT 0
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_MASK (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_2CYCLE (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_1CYCLE (0 << 4)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_TEST (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ALWAYS (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ONCE (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_FAST (1 << 0)
+
+/* ----------------------------------------------------- */
+
+/* The byte lane VDL status calibTotal[9:0] is comprised of [9:4] step value, [3:2] fine fall */
+/* and [1:0] fine rise. Note that calibTotal[9:0] is located at bit 4 in the VDL status */
+/* register. The fine rise and fall are no longer used, so add some definitions for just */
+/* the step setting to simplify things. */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_MASK (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT 4
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_MASK (0x3ff << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_LOCK (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_IDLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT 12
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT 0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_MASK (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_P 0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_N 1
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_EN 2
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_WRITE_DQ_DQM 3
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_P 4
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_N 5
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_EN 6
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_WRITE_DQ_DQM 7
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ENABLE (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ADJUST (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ENABLE (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ADJUST (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT 0
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_MASK (0xf << ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CLEAR_STATUS (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_ENABLE (1u << 31)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_RXENB_DISABLE (1 << 19)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_IDDQ_DISABLE (1 << 18)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_REB_DISABLE (1 << 17)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_OEB_DISABLE (1 << 16)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_RXENB_DISABLE (1 << 15)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_IDDQ_DISABLE (1 << 14)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_REB_DISABLE (1 << 13)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_OEB_DISABLE (1 << 12)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_RXENB_DISABLE (1 << 11)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_IDDQ_DISABLE (1 << 10)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_REB_DISABLE (1 << 9)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_OEB_DISABLE (1 << 8)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_RXENB_DISABLE (1 << 7)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_IDDQ_DISABLE (1 << 6)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_REB_DISABLE (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_OEB_DISABLE (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_RXENB_DISABLE (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_IDDQ_DISABLE (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_REB_DISABLE (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_OEB_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B_DDR_READ_ENB (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SEL_SSTL18 (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELTXDRV_CI (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELRXDRV (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SLEW (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_CLK_CTL_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_WRITE_CTL_PREAMBLE_DDR3 (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_HALF (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_OFF (1 << 0)
+
+/*********************************************************************/
+/* ARM PL341 DDRC to Broadcom DDR23 PHY glue register definitions */
+/*********************************************************************/
+
+ typedef struct {
+ uint32_t cfg;
+ uint32_t actMonCnt;
+ uint32_t ctl;
+ uint32_t lbistCtl;
+ uint32_t lbistSeed;
+ uint32_t lbistStatus;
+ uint32_t tieOff;
+ uint32_t actMonClear;
+ uint32_t status;
+ uint32_t user;
+ } ddrcReg_CTLR_PHY_GLUE_REG_t;
+
+#define ddrcReg_CTLR_PHY_GLUE_OFFSET 0x0700
+#define ddrcReg_CTLR_PHY_GLUE_REGP ((volatile ddrcReg_CTLR_PHY_GLUE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_PHY_GLUE_OFFSET))
+
+/* ----------------------------------------------------- */
+
+/* DDR2 / AXI block phase alignment interrupt control */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT 18
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_MASK (0x3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_OFF (0 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_TIGHT (1 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_MEDIUM (2 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_LOOSE (3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT 17
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_DIFFERENTIAL (0 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_CMOS (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT 16
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_DEEP (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_HW_FIXED_ALIGNMENT_DISABLED ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT 15
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_BP134 (0 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301
+
+/* Software control of PHY VDL updates from control register settings. Bit 13 enables the use of Bit 14. */
+/* If software control is not enabled, then updates occur when a refresh command is issued by the hardware */
+/* controller. If 2 chips selects are being used, then software control must be enabled. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_LOAD (1 << 14)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_ENABLE (1 << 13)
+
+/* Use these to bypass a pipeline stage. By default the ADDR is off but the BYTE LANE in / out are on. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_ADDR_CTL_IN_BYPASS_PIPELINE_STAGE (1 << 12)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_IN_BYPASS_PIPELINE_STAGE (1 << 11)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_OUT_BYPASS_PIPELINE_STAGE (1 << 10)
+
+/* Chip select count */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT 9
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_1 (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_2 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT 8
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_ASYNC (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SYNC (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT 7
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_LOW (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_HIGH (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT 6
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_LOW (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_HIGH (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT 0
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_MASK (0x7 << ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT 0
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_MASK (0x7f << ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT)
+
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#ifdef __cplusplus
+} /* end extern "C" */
+#endif
+#endif /* DDRC_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
new file mode 100644
index 000000000000..375066ad0186
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -0,0 +1,145 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw_priv.h
+*
+* @brief Private Definitions for low level DMA driver
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_PRIV_H
+#define _DMACHW_PRIV_H
+
+#include <csp/stdint.h>
+
+/* Data type for DMA Link List Item */
+typedef struct {
+ uint32_t sar; /* Source Adress Register.
+ Address must be aligned to CTLx.SRC_TR_WIDTH. */
+ uint32_t dar; /* Destination Address Register.
+ Address must be aligned to CTLx.DST_TR_WIDTH. */
+ uint32_t llpPhy; /* LLP contains the physical address of the next descriptor for block chaining using linked lists.
+ Address MUST be aligned to a 32-bit boundary. */
+ dmacHw_REG64_t ctl; /* Control Register. 64 bits */
+ uint32_t sstat; /* Source Status Register */
+ uint32_t dstat; /* Destination Status Register */
+ uint32_t devCtl; /* Device specific control information */
+ uint32_t llp; /* LLP contains the virtual address of the next descriptor for block chaining using linked lists. */
+} dmacHw_DESC_t;
+
+/*
+ * Descriptor ring pointers
+ */
+typedef struct {
+ int num; /* Number of link items */
+ dmacHw_DESC_t *pHead; /* Head of descriptor ring (for writing) */
+ dmacHw_DESC_t *pTail; /* Tail of descriptor ring (for reading) */
+ dmacHw_DESC_t *pProg; /* Descriptor to program the channel (for programming the channel register) */
+ dmacHw_DESC_t *pEnd; /* End of current descriptor chain */
+ dmacHw_DESC_t *pFree; /* Descriptor to free memory (freeing dynamic memory) */
+ uint32_t virt2PhyOffset; /* Virtual to physical address offset for the descriptor ring */
+} dmacHw_DESC_RING_t;
+
+/*
+ * DMA channel control block
+ */
+typedef struct {
+ uint32_t module; /* DMA controller module (0-1) */
+ uint32_t channel; /* DMA channel (0-7) */
+ volatile uint32_t varDataStarted; /* Flag indicating variable data channel is enabled */
+ volatile uint32_t descUpdated; /* Flag to indicate descriptor update is complete */
+ void *userData; /* Channel specifc user data */
+} dmacHw_CBLK_t;
+
+#define dmacHw_ASSERT(a) if (!(a)) while (1)
+#define dmacHw_MAX_CHANNEL_COUNT 16
+#define dmacHw_FREE_USER_MEMORY 0xFFFFFFFF
+#define dmacHw_DESC_FREE dmacHw_REG_CTL_DONE
+#define dmacHw_DESC_INIT ((dmacHw_DESC_t *) 0xFFFFFFFF)
+#define dmacHw_MAX_BLOCKSIZE 4064
+#define dmacHw_GET_DESC_RING(addr) (dmacHw_DESC_RING_t *)(addr)
+#define dmacHw_ADDRESS_MASK(byte) ((byte) - 1)
+#define dmacHw_NEXT_DESC(rp, dp) ((rp)->dp = (dmacHw_DESC_t *)(rp)->dp->llp)
+#define dmacHw_HANDLE_TO_CBLK(handle) ((dmacHw_CBLK_t *) (handle))
+#define dmacHw_CBLK_TO_HANDLE(cblkp) ((dmacHw_HANDLE_t) (cblkp))
+#define dmacHw_DST_IS_MEMORY(tt) (((tt) == dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) || ((tt) == dmacHw_TRANSFER_TYPE_MEM_TO_MEM)) ? 1 : 0
+
+/****************************************************************************/
+/**
+* @brief Get next available transaction width
+*
+*
+* @return On sucess : Next avail able transaction width
+* On failure : dmacHw_TRANSACTION_WIDTH_8
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static inline dmacHw_TRANSACTION_WIDTH_e dmacHw_GetNextTrWidth(dmacHw_TRANSACTION_WIDTH_e tw /* [ IN ] Current transaction width */
+ ) {
+ if (tw & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+ return ((tw >> dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT) -
+ 1) << dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT;
+ } else if (tw & dmacHw_REG_CTL_DST_TR_WIDTH_MASK) {
+ return ((tw >> dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT) -
+ 1) << dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT;
+ }
+
+ /* Default return */
+ return dmacHw_SRC_TRANSACTION_WIDTH_8;
+}
+
+/****************************************************************************/
+/**
+* @brief Get number of bytes per transaction
+*
+* @return Number of bytes per transaction
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static inline int dmacHw_GetTrWidthInBytes(dmacHw_TRANSACTION_WIDTH_e tw /* [ IN ] Transaction width */
+ ) {
+ int width = 1;
+ switch (tw) {
+ case dmacHw_SRC_TRANSACTION_WIDTH_8:
+ width = 1;
+ break;
+ case dmacHw_SRC_TRANSACTION_WIDTH_16:
+ case dmacHw_DST_TRANSACTION_WIDTH_16:
+ width = 2;
+ break;
+ case dmacHw_SRC_TRANSACTION_WIDTH_32:
+ case dmacHw_DST_TRANSACTION_WIDTH_32:
+ width = 4;
+ break;
+ case dmacHw_SRC_TRANSACTION_WIDTH_64:
+ case dmacHw_DST_TRANSACTION_WIDTH_64:
+ width = 8;
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+
+ /* Default transaction width */
+ return width;
+}
+
+#endif /* _DMACHW_PRIV_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
new file mode 100644
index 000000000000..891cea87e333
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -0,0 +1,406 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw_reg.h
+*
+* @brief Definitions for low level DMA registers
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_REG_H
+#define _DMACHW_REG_H
+
+#include <csp/stdint.h>
+#include <mach/csp/mm_io.h>
+
+/* Data type for 64 bit little endian register */
+typedef struct {
+ volatile uint32_t lo; /* Lower 32 bit in little endian mode */
+ volatile uint32_t hi; /* Upper 32 bit in little endian mode */
+} dmacHw_REG64_t;
+
+/* Data type representing DMA channel registers */
+typedef struct {
+ dmacHw_REG64_t ChannelSar; /* Source Adress Register. 64 bits (upper 32 bits are reserved)
+ Address must be aligned to CTLx.SRC_TR_WIDTH.
+ */
+ dmacHw_REG64_t ChannelDar; /* Destination Address Register.64 bits (upper 32 bits are reserved)
+ Address must be aligned to CTLx.DST_TR_WIDTH.
+ */
+ dmacHw_REG64_t ChannelLlp; /* Link List Pointer.64 bits (upper 32 bits are reserved)
+ LLP contains the pointer to the next LLI for block chaining using linked lists.
+ If LLPis set to 0x0, then transfers using linked lists are not enabled.
+ Address MUST be aligned to a 32-bit boundary.
+ */
+ dmacHw_REG64_t ChannelCtl; /* Control Register. 64 bits */
+ dmacHw_REG64_t ChannelSstat; /* Source Status Register */
+ dmacHw_REG64_t ChannelDstat; /* Destination Status Register */
+ dmacHw_REG64_t ChannelSstatAddr; /* Source Status Address Register */
+ dmacHw_REG64_t ChannelDstatAddr; /* Destination Status Address Register */
+ dmacHw_REG64_t ChannelConfig; /* Channel Configuration Register */
+ dmacHw_REG64_t SrcGather; /* Source gather register */
+ dmacHw_REG64_t DstScatter; /* Destination scatter register */
+} dmacHw_CH_REG_t;
+
+/* Data type for RAW interrupt status registers */
+typedef struct {
+ dmacHw_REG64_t RawTfr; /* Raw Status for IntTfr Interrupt */
+ dmacHw_REG64_t RawBlock; /* Raw Status for IntBlock Interrupt */
+ dmacHw_REG64_t RawSrcTran; /* Raw Status for IntSrcTran Interrupt */
+ dmacHw_REG64_t RawDstTran; /* Raw Status for IntDstTran Interrupt */
+ dmacHw_REG64_t RawErr; /* Raw Status for IntErr Interrupt */
+} dmacHw_INT_RAW_t;
+
+/* Data type for interrupt status registers */
+typedef struct {
+ dmacHw_REG64_t StatusTfr; /* Status for IntTfr Interrupt */
+ dmacHw_REG64_t StatusBlock; /* Status for IntBlock Interrupt */
+ dmacHw_REG64_t StatusSrcTran; /* Status for IntSrcTran Interrupt */
+ dmacHw_REG64_t StatusDstTran; /* Status for IntDstTran Interrupt */
+ dmacHw_REG64_t StatusErr; /* Status for IntErr Interrupt */
+} dmacHw_INT_STATUS_t;
+
+/* Data type for interrupt mask registers*/
+typedef struct {
+ dmacHw_REG64_t MaskTfr; /* Mask for IntTfr Interrupt */
+ dmacHw_REG64_t MaskBlock; /* Mask for IntBlock Interrupt */
+ dmacHw_REG64_t MaskSrcTran; /* Mask for IntSrcTran Interrupt */
+ dmacHw_REG64_t MaskDstTran; /* Mask for IntDstTran Interrupt */
+ dmacHw_REG64_t MaskErr; /* Mask for IntErr Interrupt */
+} dmacHw_INT_MASK_t;
+
+/* Data type for interrupt clear registers */
+typedef struct {
+ dmacHw_REG64_t ClearTfr; /* Clear for IntTfr Interrupt */
+ dmacHw_REG64_t ClearBlock; /* Clear for IntBlock Interrupt */
+ dmacHw_REG64_t ClearSrcTran; /* Clear for IntSrcTran Interrupt */
+ dmacHw_REG64_t ClearDstTran; /* Clear for IntDstTran Interrupt */
+ dmacHw_REG64_t ClearErr; /* Clear for IntErr Interrupt */
+ dmacHw_REG64_t StatusInt; /* Status for each interrupt type */
+} dmacHw_INT_CLEAR_t;
+
+/* Data type for software handshaking registers */
+typedef struct {
+ dmacHw_REG64_t ReqSrcReg; /* Source Software Transaction Request Register */
+ dmacHw_REG64_t ReqDstReg; /* Destination Software Transaction Request Register */
+ dmacHw_REG64_t SglReqSrcReg; /* Single Source Transaction Request Register */
+ dmacHw_REG64_t SglReqDstReg; /* Single Destination Transaction Request Register */
+ dmacHw_REG64_t LstSrcReg; /* Last Source Transaction Request Register */
+ dmacHw_REG64_t LstDstReg; /* Last Destination Transaction Request Register */
+} dmacHw_SW_HANDSHAKE_t;
+
+/* Data type for misc. registers */
+typedef struct {
+ dmacHw_REG64_t DmaCfgReg; /* DMA Configuration Register */
+ dmacHw_REG64_t ChEnReg; /* DMA Channel Enable Register */
+ dmacHw_REG64_t DmaIdReg; /* DMA ID Register */
+ dmacHw_REG64_t DmaTestReg; /* DMA Test Register */
+ dmacHw_REG64_t Reserved0; /* Reserved */
+ dmacHw_REG64_t Reserved1; /* Reserved */
+ dmacHw_REG64_t CompParm6; /* Component Parameter 6 */
+ dmacHw_REG64_t CompParm5; /* Component Parameter 5 */
+ dmacHw_REG64_t CompParm4; /* Component Parameter 4 */
+ dmacHw_REG64_t CompParm3; /* Component Parameter 3 */
+ dmacHw_REG64_t CompParm2; /* Component Parameter 2 */
+ dmacHw_REG64_t CompParm1; /* Component Parameter 1 */
+ dmacHw_REG64_t CompId; /* Compoent ID */
+} dmacHw_MISC_t;
+
+/* Base registers */
+#define dmacHw_0_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */
+#define dmacHw_1_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */
+
+extern uint32_t dmaChannelCount_0;
+extern uint32_t dmaChannelCount_1;
+
+/* Define channel specific registers */
+#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
+
+/* Raw interrupt status registers */
+#define dmacHw_REG_INT_RAW_BASE(module) ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
+#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
+#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
+#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
+#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
+#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_STAT_BASE(module) ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
+#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
+#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
+#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
+#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
+#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_MASK_BASE(module) ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
+#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
+#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
+#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
+#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
+#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
+
+/* Interrupt clear registers */
+#define dmacHw_REG_INT_CLEAR_BASE(module) ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
+#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
+#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
+#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
+#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
+#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
+#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
+
+/* Software handshaking registers */
+#define dmacHw_REG_SW_HS_BASE(module) ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
+#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
+
+/* Miscellaneous registers */
+#define dmacHw_REG_MISC_BASE(module) ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
+#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
+#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
+#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
+#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
+#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
+#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
+#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
+#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
+#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
+#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
+#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
+#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
+#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
+#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
+
+/* Channel control registers */
+#define dmacHw_REG_SAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo)
+#define dmacHw_REG_DAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDar.lo)
+#define dmacHw_REG_LLP(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelLlp.lo)
+
+#define dmacHw_REG_CTL_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.lo)
+#define dmacHw_REG_CTL_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.hi)
+
+#define dmacHw_REG_SSTAT(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSstat.lo)
+#define dmacHw_REG_DSTAT(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDstat.lo)
+#define dmacHw_REG_SSTATAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSstatAddr.lo)
+#define dmacHw_REG_DSTATAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDstatAddr.lo)
+
+#define dmacHw_REG_CFG_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.lo)
+#define dmacHw_REG_CFG_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.hi)
+
+#define dmacHw_REG_SGR_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->SrcGather.lo)
+#define dmacHw_REG_SGR_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->SrcGather.hi)
+
+#define dmacHw_REG_DSR_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->DstScatter.lo)
+#define dmacHw_REG_DSR_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->DstScatter.hi)
+
+#define INT_STATUS_MASK(channel) (0x00000001 << (channel))
+#define CHANNEL_BUSY(mod, channel) (dmacHw_REG_MISC_CH_ENABLE((mod)) & (0x00000001 << (channel)))
+
+/* Bit mask for REG_DMACx_CTL_LO */
+
+#define dmacHw_REG_CTL_INT_EN 0x00000001 /* Channel interrupt enable */
+
+#define dmacHw_REG_CTL_DST_TR_WIDTH_MASK 0x0000000E /* Destination transaction width mask */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT 1
+#define dmacHw_REG_CTL_DST_TR_WIDTH_8 0x00000000 /* Destination transaction width 8 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_16 0x00000002 /* Destination transaction width 16 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_32 0x00000004 /* Destination transaction width 32 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_64 0x00000006 /* Destination transaction width 64 bit */
+
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_MASK 0x00000070 /* Source transaction width mask */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT 4
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_8 0x00000000 /* Source transaction width 8 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_16 0x00000010 /* Source transaction width 16 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_32 0x00000020 /* Source transaction width 32 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_64 0x00000030 /* Source transaction width 64 bit */
+
+#define dmacHw_REG_CTL_DS_ENABLE 0x00040000 /* Destination scatter enable */
+#define dmacHw_REG_CTL_SG_ENABLE 0x00020000 /* Source gather enable */
+
+#define dmacHw_REG_CTL_DINC_MASK 0x00000180 /* Destination address inc/dec mask */
+#define dmacHw_REG_CTL_DINC_INC 0x00000000 /* Destination address increment */
+#define dmacHw_REG_CTL_DINC_DEC 0x00000080 /* Destination address decrement */
+#define dmacHw_REG_CTL_DINC_NC 0x00000100 /* Destination address no change */
+
+#define dmacHw_REG_CTL_SINC_MASK 0x00000600 /* Source address inc/dec mask */
+#define dmacHw_REG_CTL_SINC_INC 0x00000000 /* Source address increment */
+#define dmacHw_REG_CTL_SINC_DEC 0x00000200 /* Source address decrement */
+#define dmacHw_REG_CTL_SINC_NC 0x00000400 /* Source address no change */
+
+#define dmacHw_REG_CTL_DST_MSIZE_MASK 0x00003800 /* Destination burst transaction length */
+#define dmacHw_REG_CTL_DST_MSIZE_0 0x00000000 /* No Destination burst */
+#define dmacHw_REG_CTL_DST_MSIZE_4 0x00000800 /* Destination burst transaction length 4 */
+#define dmacHw_REG_CTL_DST_MSIZE_8 0x00001000 /* Destination burst transaction length 8 */
+#define dmacHw_REG_CTL_DST_MSIZE_16 0x00001800 /* Destination burst transaction length 16 */
+
+#define dmacHw_REG_CTL_SRC_MSIZE_MASK 0x0001C000 /* Source burst transaction length */
+#define dmacHw_REG_CTL_SRC_MSIZE_0 0x00000000 /* No Source burst */
+#define dmacHw_REG_CTL_SRC_MSIZE_4 0x00004000 /* Source burst transaction length 4 */
+#define dmacHw_REG_CTL_SRC_MSIZE_8 0x00008000 /* Source burst transaction length 8 */
+#define dmacHw_REG_CTL_SRC_MSIZE_16 0x0000C000 /* Source burst transaction length 16 */
+
+#define dmacHw_REG_CTL_TTFC_MASK 0x00700000 /* Transfer type and flow controller */
+#define dmacHw_REG_CTL_TTFC_MM_DMAC 0x00000000 /* Memory to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_DMAC 0x00100000 /* Memory to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_DMAC 0x00200000 /* Peripheral to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DMAC 0x00300000 /* Peripheral to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_PERI 0x00400000 /* Peripheral to Memory with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_SPERI 0x00500000 /* Peripheral to Peripheral with Source Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_PERI 0x00600000 /* Memory to Peripheral with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DPERI 0x00700000 /* Peripheral to Peripheral with Destination Peripheral as flow controller */
+
+#define dmacHw_REG_CTL_DMS_MASK 0x01800000 /* Destination AHB master interface */
+#define dmacHw_REG_CTL_DMS_1 0x00000000 /* Destination AHB master interface 1 */
+#define dmacHw_REG_CTL_DMS_2 0x00800000 /* Destination AHB master interface 2 */
+
+#define dmacHw_REG_CTL_SMS_MASK 0x06000000 /* Source AHB master interface */
+#define dmacHw_REG_CTL_SMS_1 0x00000000 /* Source AHB master interface 1 */
+#define dmacHw_REG_CTL_SMS_2 0x02000000 /* Source AHB master interface 2 */
+
+#define dmacHw_REG_CTL_LLP_DST_EN 0x08000000 /* Block chaining enable for destination side */
+#define dmacHw_REG_CTL_LLP_SRC_EN 0x10000000 /* Block chaining enable for source side */
+
+/* Bit mask for REG_DMACx_CTL_HI */
+#define dmacHw_REG_CTL_BLOCK_TS_MASK 0x00000FFF /* Block transfer size */
+#define dmacHw_REG_CTL_DONE 0x00001000 /* Block trasnfer done */
+
+/* Bit mask for REG_DMACx_CFG_LO */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_SHIFT 5 /* Channel priority shift */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_MASK 0x000000E0 /* Channel priority mask */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_0 0x00000000 /* Channel priority 0 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_1 0x00000020 /* Channel priority 1 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_2 0x00000040 /* Channel priority 2 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_3 0x00000060 /* Channel priority 3 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_4 0x00000080 /* Channel priority 4 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_5 0x000000A0 /* Channel priority 5 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_6 0x000000C0 /* Channel priority 6 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_7 0x000000E0 /* Channel priority 7 */
+
+#define dmacHw_REG_CFG_LO_CH_SUSPEND 0x00000100 /* Channel suspend */
+#define dmacHw_REG_CFG_LO_CH_FIFO_EMPTY 0x00000200 /* Channel FIFO empty */
+#define dmacHw_REG_CFG_LO_DST_CH_SW_HS 0x00000400 /* Destination channel SW handshaking */
+#define dmacHw_REG_CFG_LO_SRC_CH_SW_HS 0x00000800 /* Source channel SW handshaking */
+
+#define dmacHw_REG_CFG_LO_CH_LOCK_MASK 0x00003000 /* Channel locking mask */
+#define dmacHw_REG_CFG_LO_CH_LOCK_DMA 0x00000000 /* Channel lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_BLOCK 0x00001000 /* Channel lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_TRANS 0x00002000 /* Channel lock over the transaction */
+#define dmacHw_REG_CFG_LO_CH_LOCK_ENABLE 0x00010000 /* Channel lock enable */
+
+#define dmacHw_REG_CFG_LO_BUS_LOCK_MASK 0x0000C000 /* Bus locking mask */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_DMA 0x00000000 /* Bus lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_BLOCK 0x00004000 /* Bus lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_TRANS 0x00008000 /* Bus lock over the transaction */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_ENABLE 0x00020000 /* Bus lock enable */
+
+#define dmacHw_REG_CFG_LO_DST_HS_POLARITY_LOW 0x00040000 /* Destination channel handshaking signal polarity low */
+#define dmacHw_REG_CFG_LO_SRC_HS_POLARITY_LOW 0x00080000 /* Source channel handshaking signal polarity low */
+
+#define dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK 0x3FF00000 /* Maximum AMBA burst length */
+
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_SRC 0x40000000 /* Source address auto reload */
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_DST 0x80000000 /* Destination address auto reload */
+
+/* Bit mask for REG_DMACx_CFG_HI */
+#define dmacHw_REG_CFG_HI_FC_DST_READY 0x00000001 /* Source transaction request is serviced when destination is ready */
+#define dmacHw_REG_CFG_HI_FIFO_ENOUGH 0x00000002 /* Initiate burst transaction when enough data in available in FIFO */
+
+#define dmacHw_REG_CFG_HI_AHB_HPROT_MASK 0x0000001C /* AHB protection mask */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_1 0x00000004 /* AHB protection 1 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_2 0x00000008 /* AHB protection 2 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_3 0x00000010 /* AHB protection 3 */
+
+#define dmacHw_REG_CFG_HI_UPDATE_DST_STAT 0x00000020 /* Destination status update enable */
+#define dmacHw_REG_CFG_HI_UPDATE_SRC_STAT 0x00000040 /* Source status update enable */
+
+#define dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK 0x00000780 /* Source peripheral hardware interface mask */
+#define dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK 0x00007800 /* Destination peripheral hardware interface mask */
+
+/* DMA Configuration Parameters */
+#define dmacHw_REG_COMP_PARAM_NUM_CHANNELS 0x00000700 /* Number of channels */
+#define dmacHw_REG_COMP_PARAM_NUM_INTERFACE 0x00001800 /* Number of master interface */
+#define dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE 0x0000000f /* Maximum brust size */
+#define dmacHw_REG_COMP_PARAM_DATA_WIDTH 0x00006000 /* Data transfer width */
+
+/* Define GET/SET macros to program the registers */
+#define dmacHw_SET_SAR(module, channel, addr) (dmacHw_REG_SAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DAR(module, channel, addr) (dmacHw_REG_DAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_LLP(module, channel, ptr) (dmacHw_REG_LLP((module), (channel)) = (uint32_t) (ptr))
+
+#define dmacHw_GET_SSTAT(module, channel) (dmacHw_REG_SSTAT((module), (channel)))
+#define dmacHw_GET_DSTAT(module, channel) (dmacHw_REG_DSTAT((module), (channel)))
+
+#define dmacHw_SET_SSTATAR(module, channel, addr) (dmacHw_REG_SSTATAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DSTATAR(module, channel, addr) (dmacHw_REG_DSTATAR((module), (channel)) = (uint32_t) (addr))
+
+#define dmacHw_SET_CONTROL_LO(module, channel, ctl) (dmacHw_REG_CTL_LO((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_LO(module, channel) (dmacHw_REG_CTL_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_LO(module, channel) (dmacHw_REG_CTL_LO((module), (channel)))
+
+#define dmacHw_SET_CONTROL_HI(module, channel, ctl) (dmacHw_REG_CTL_HI((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_HI(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_HI(module, channel) (dmacHw_REG_CTL_HI((module), (channel)))
+
+#define dmacHw_GET_BLOCK_SIZE(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_BLOCK_TS_MASK)
+#define dmacHw_DMA_COMPLETE(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_DONE)
+
+#define dmacHw_SET_CONFIG_LO(module, channel, cfg) (dmacHw_REG_CFG_LO((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_LO(module, channel) (dmacHw_REG_CFG_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_LO(module, channel) (dmacHw_REG_CFG_LO((module), (channel)))
+#define dmacHw_SET_AMBA_BUSRT_LEN(module, channel, len) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) | (((len) << 20) & dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK))
+#define dmacHw_SET_CHANNEL_PRIORITY(module, channel, prio) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_CH_PRIORITY_MASK)) | (prio))
+#define dmacHw_SET_AHB_HPROT(module, channel, protect) (dmacHw_REG_CFG_HI(module, channel) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_AHB_HPROT_MASK)) | (protect))
+
+#define dmacHw_SET_CONFIG_HI(module, channel, cfg) (dmacHw_REG_CFG_HI((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_HI(module, channel) (dmacHw_REG_CFG_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_HI(module, channel) (dmacHw_REG_CFG_HI((module), (channel)))
+#define dmacHw_SET_SRC_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) | (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK))
+#define dmacHw_SRC_PERI_INTF(intf) (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)
+#define dmacHw_SET_DST_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) | (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK))
+#define dmacHw_DST_PERI_INTF(intf) (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)
+
+#define dmacHw_DMA_START(module, channel) (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_DMA_STOP(module, channel) (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DMA_ENABLE(module) (dmacHw_REG_MISC_CFG((module)) = 1)
+#define dmacHw_DMA_DISABLE(module) (dmacHw_REG_MISC_CFG((module)) = 0)
+
+#define dmacHw_TRAN_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+
+#define dmacHw_TRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_BLOCK_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_ERROR_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_STRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_STRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DTRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_DTRAN((module)) = (0x00000001 << ((channel) + 8)))
+
+#define dmacHw_TRAN_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_TRAN((module)) = (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_BLOCK((module)) = (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_ERROR((module)) = (0x00000001 << (channel)))
+
+#define dmacHw_GET_NUM_CHANNEL(module) (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_CHANNELS) >> 8) + 1)
+#define dmacHw_GET_NUM_INTERFACE(module) (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_INTERFACE) >> 11) + 1)
+#define dmacHw_GET_MAX_BLOCK_SIZE(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_LO((module)) >> (4 * (channel))) & dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE)
+#define dmacHw_GET_CHANNEL_DATA_WIDTH(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_DATA_WIDTH) >> 13)
+
+#endif /* _DMACHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
new file mode 100644
index 000000000000..cfa91bed9d34
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
@@ -0,0 +1,73 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_HW_CFG_H
+#define CSP_HW_CFG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <cfg_global.h>
+#include <mach/csp/cap_inline.h>
+
+#if defined(__KERNEL__)
+#include <mach/memory_settings.h>
+#else
+#include <hw_cfg.h>
+#endif
+
+/* Some items that can be defined externally, but will be set to default values */
+/* if they are not defined. */
+/* HW_CFG_PLL_SPREAD_SPECTRUM_DISABLE Default undefined and SS is enabled. */
+/* HW_CFG_SDRAM_CAS_LATENCY 5 Default 5, Values [3..6] */
+/* HW_CFG_SDRAM_CHIP_SELECT_CNT 1 Default 1, Vaules [1..2] */
+/* HW_CFG_SDRAM_SPEED_GRADE 667 Default 667, Values [400,533,667,800] */
+/* HW_CFG_SDRAM_WIDTH_BITS 16 Default 16, Vaules [8,16] */
+/* HW_CFG_SDRAM_ADDR_BRC Default undefined and Row-Bank-Col (RBC) addressing used. Define to use Bank-Row-Col (BRC). */
+/* HW_CFG_SDRAM_CLK_ASYNC Default undefined and DDR clock is synchronous with AXI BUS clock. Define for ASYNC mode. */
+
+#if defined(CFG_GLOBAL_CHIP)
+ #if (CFG_GLOBAL_CHIP == FPGA11107)
+ #define HW_CFG_BUS_CLK_HZ 5000000
+ #define HW_CFG_DDR_CTLR_CLK_HZ 10000000
+ #define HW_CFG_DDR_PHY_OMIT
+ #define HW_CFG_UART_CLK_HZ 7500000
+ #else
+ #define HW_CFG_PLL_VCO_HZ 2000000000
+ #define HW_CFG_PLL2_VCO_HZ 1800000000
+ #define HW_CFG_ARM_CLK_HZ CAP_HW_CFG_ARM_CLK_HZ
+ #define HW_CFG_BUS_CLK_HZ 166666666
+ #define HW_CFG_DDR_CTLR_CLK_HZ 333333333
+ #define HW_CFG_DDR_PHY_CLK_HZ (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+ #define HW_CFG_UART_CLK_HZ 142857142
+ #define HW_CFG_VPM_CLK_HZ CAP_HW_CFG_VPM_CLK_HZ
+ #endif
+#else
+ #define HW_CFG_PLL_VCO_HZ 1800000000
+ #define HW_CFG_PLL2_VCO_HZ 1800000000
+ #define HW_CFG_ARM_CLK_HZ 450000000
+ #define HW_CFG_BUS_CLK_HZ 150000000
+ #define HW_CFG_DDR_CTLR_CLK_HZ 300000000
+ #define HW_CFG_DDR_PHY_CLK_HZ (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+ #define HW_CFG_UART_CLK_HZ 150000000
+ #define HW_CFG_VPM_CLK_HZ 300000000
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_HW_CFG_H */
+
diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
new file mode 100644
index 000000000000..e01fc4607c91
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
@@ -0,0 +1,246 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file intcHw_reg.h
+*
+* @brief platform specific interrupt controller bit assignments
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_REG_H
+#define _INTCHW_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/reg.h>
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define INTCHW_NUM_IRQ_PER_INTC 32 /* Maximum number of interrupt controllers */
+#define INTCHW_NUM_INTC 3
+
+/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */
+#define INTCHW_INTC0 ((void *)MM_IO_BASE_INTC0)
+#define INTCHW_INTC1 ((void *)MM_IO_BASE_INTC1)
+#define INTCHW_SINTC ((void *)MM_IO_BASE_SINTC)
+
+/* INTC0 - interrupt controller 0 */
+#define INTCHW_INTC0_PIF_BITNUM 31 /* Peripheral interface interrupt */
+#define INTCHW_INTC0_CLCD_BITNUM 30 /* LCD Controller interrupt */
+#define INTCHW_INTC0_GE_BITNUM 29 /* Graphic engine interrupt */
+#define INTCHW_INTC0_APM_BITNUM 28 /* Audio process module interrupt */
+#define INTCHW_INTC0_ESW_BITNUM 27 /* Ethernet switch interrupt */
+#define INTCHW_INTC0_SPIH_BITNUM 26 /* SPI host interrupt */
+#define INTCHW_INTC0_TIMER3_BITNUM 25 /* Timer3 interrupt */
+#define INTCHW_INTC0_TIMER2_BITNUM 24 /* Timer2 interrupt */
+#define INTCHW_INTC0_TIMER1_BITNUM 23 /* Timer1 interrupt */
+#define INTCHW_INTC0_TIMER0_BITNUM 22 /* Timer0 interrupt */
+#define INTCHW_INTC0_SDIOH1_BITNUM 21 /* SDIO1 host interrupt */
+#define INTCHW_INTC0_SDIOH0_BITNUM 20 /* SDIO0 host interrupt */
+#define INTCHW_INTC0_USBD_BITNUM 19 /* USB device interrupt */
+#define INTCHW_INTC0_USBH1_BITNUM 18 /* USB1 host interrupt */
+#define INTCHW_INTC0_USBHD2_BITNUM 17 /* USB host2/device2 interrupt */
+#define INTCHW_INTC0_VPM_BITNUM 16 /* Voice process module interrupt */
+#define INTCHW_INTC0_DMA1C7_BITNUM 15 /* DMA1 channel 7 interrupt */
+#define INTCHW_INTC0_DMA1C6_BITNUM 14 /* DMA1 channel 6 interrupt */
+#define INTCHW_INTC0_DMA1C5_BITNUM 13 /* DMA1 channel 5 interrupt */
+#define INTCHW_INTC0_DMA1C4_BITNUM 12 /* DMA1 channel 4 interrupt */
+#define INTCHW_INTC0_DMA1C3_BITNUM 11 /* DMA1 channel 3 interrupt */
+#define INTCHW_INTC0_DMA1C2_BITNUM 10 /* DMA1 channel 2 interrupt */
+#define INTCHW_INTC0_DMA1C1_BITNUM 9 /* DMA1 channel 1 interrupt */
+#define INTCHW_INTC0_DMA1C0_BITNUM 8 /* DMA1 channel 0 interrupt */
+#define INTCHW_INTC0_DMA0C7_BITNUM 7 /* DMA0 channel 7 interrupt */
+#define INTCHW_INTC0_DMA0C6_BITNUM 6 /* DMA0 channel 6 interrupt */
+#define INTCHW_INTC0_DMA0C5_BITNUM 5 /* DMA0 channel 5 interrupt */
+#define INTCHW_INTC0_DMA0C4_BITNUM 4 /* DMA0 channel 4 interrupt */
+#define INTCHW_INTC0_DMA0C3_BITNUM 3 /* DMA0 channel 3 interrupt */
+#define INTCHW_INTC0_DMA0C2_BITNUM 2 /* DMA0 channel 2 interrupt */
+#define INTCHW_INTC0_DMA0C1_BITNUM 1 /* DMA0 channel 1 interrupt */
+#define INTCHW_INTC0_DMA0C0_BITNUM 0 /* DMA0 channel 0 interrupt */
+
+#define INTCHW_INTC0_PIF (1<<INTCHW_INTC0_PIF_BITNUM)
+#define INTCHW_INTC0_CLCD (1<<INTCHW_INTC0_CLCD_BITNUM)
+#define INTCHW_INTC0_GE (1<<INTCHW_INTC0_GE_BITNUM)
+#define INTCHW_INTC0_APM (1<<INTCHW_INTC0_APM_BITNUM)
+#define INTCHW_INTC0_ESW (1<<INTCHW_INTC0_ESW_BITNUM)
+#define INTCHW_INTC0_SPIH (1<<INTCHW_INTC0_SPIH_BITNUM)
+#define INTCHW_INTC0_TIMER3 (1<<INTCHW_INTC0_TIMER3_BITNUM)
+#define INTCHW_INTC0_TIMER2 (1<<INTCHW_INTC0_TIMER2_BITNUM)
+#define INTCHW_INTC0_TIMER1 (1<<INTCHW_INTC0_TIMER1_BITNUM)
+#define INTCHW_INTC0_TIMER0 (1<<INTCHW_INTC0_TIMER0_BITNUM)
+#define INTCHW_INTC0_SDIOH1 (1<<INTCHW_INTC0_SDIOH1_BITNUM)
+#define INTCHW_INTC0_SDIOH0 (1<<INTCHW_INTC0_SDIOH0_BITNUM)
+#define INTCHW_INTC0_USBD (1<<INTCHW_INTC0_USBD_BITNUM)
+#define INTCHW_INTC0_USBH1 (1<<INTCHW_INTC0_USBH1_BITNUM)
+#define INTCHW_INTC0_USBHD2 (1<<INTCHW_INTC0_USBHD2_BITNUM)
+#define INTCHW_INTC0_VPM (1<<INTCHW_INTC0_VPM_BITNUM)
+#define INTCHW_INTC0_DMA1C7 (1<<INTCHW_INTC0_DMA1C7_BITNUM)
+#define INTCHW_INTC0_DMA1C6 (1<<INTCHW_INTC0_DMA1C6_BITNUM)
+#define INTCHW_INTC0_DMA1C5 (1<<INTCHW_INTC0_DMA1C5_BITNUM)
+#define INTCHW_INTC0_DMA1C4 (1<<INTCHW_INTC0_DMA1C4_BITNUM)
+#define INTCHW_INTC0_DMA1C3 (1<<INTCHW_INTC0_DMA1C3_BITNUM)
+#define INTCHW_INTC0_DMA1C2 (1<<INTCHW_INTC0_DMA1C2_BITNUM)
+#define INTCHW_INTC0_DMA1C1 (1<<INTCHW_INTC0_DMA1C1_BITNUM)
+#define INTCHW_INTC0_DMA1C0 (1<<INTCHW_INTC0_DMA1C0_BITNUM)
+#define INTCHW_INTC0_DMA0C7 (1<<INTCHW_INTC0_DMA0C7_BITNUM)
+#define INTCHW_INTC0_DMA0C6 (1<<INTCHW_INTC0_DMA0C6_BITNUM)
+#define INTCHW_INTC0_DMA0C5 (1<<INTCHW_INTC0_DMA0C5_BITNUM)
+#define INTCHW_INTC0_DMA0C4 (1<<INTCHW_INTC0_DMA0C4_BITNUM)
+#define INTCHW_INTC0_DMA0C3 (1<<INTCHW_INTC0_DMA0C3_BITNUM)
+#define INTCHW_INTC0_DMA0C2 (1<<INTCHW_INTC0_DMA0C2_BITNUM)
+#define INTCHW_INTC0_DMA0C1 (1<<INTCHW_INTC0_DMA0C1_BITNUM)
+#define INTCHW_INTC0_DMA0C0 (1<<INTCHW_INTC0_DMA0C0_BITNUM)
+
+/* INTC1 - interrupt controller 1 */
+#define INTCHW_INTC1_DDRVPMP_BITNUM 27 /* DDR and VPM PLL clock phase relationship interupt (Not for A0) */
+#define INTCHW_INTC1_DDRVPMT_BITNUM 26 /* DDR and VPM HW phase align timeout interrupt (Not for A0) */
+#define INTCHW_INTC1_DDRP_BITNUM 26 /* DDR and PLL clock phase relationship interupt (For A0 only)) */
+#define INTCHW_INTC1_RTC2_BITNUM 25 /* Real time clock tamper interrupt */
+#define INTCHW_INTC1_VDEC_BITNUM 24 /* Hantro Video Decoder interrupt */
+/* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */
+#define INTCHW_INTC1_SPUM_BITNUM 23 /* Secure process module interrupt */
+#define INTCHW_INTC1_RTC1_BITNUM 22 /* Real time clock one-shot interrupt */
+#define INTCHW_INTC1_RTC0_BITNUM 21 /* Real time clock periodic interrupt */
+#define INTCHW_INTC1_RNG_BITNUM 20 /* Random number generator interrupt */
+#define INTCHW_INTC1_FMPU_BITNUM 19 /* Flash memory parition unit interrupt */
+#define INTCHW_INTC1_VMPU_BITNUM 18 /* VRAM memory partition interrupt */
+#define INTCHW_INTC1_DMPU_BITNUM 17 /* DDR2 memory partition interrupt */
+#define INTCHW_INTC1_KEYC_BITNUM 16 /* Key pad controller interrupt */
+#define INTCHW_INTC1_TSC_BITNUM 15 /* Touch screen controller interrupt */
+#define INTCHW_INTC1_UART0_BITNUM 14 /* UART 0 */
+#define INTCHW_INTC1_WDOG_BITNUM 13 /* Watchdog timer interrupt */
+
+#define INTCHW_INTC1_UART1_BITNUM 12 /* UART 1 */
+#define INTCHW_INTC1_PMUIRQ_BITNUM 11 /* ARM performance monitor interrupt */
+#define INTCHW_INTC1_COMMRX_BITNUM 10 /* ARM DDC receive interrupt */
+#define INTCHW_INTC1_COMMTX_BITNUM 9 /* ARM DDC transmit interrupt */
+#define INTCHW_INTC1_FLASHC_BITNUM 8 /* Flash controller interrupt */
+#define INTCHW_INTC1_GPHY_BITNUM 7 /* Gigabit Phy interrupt */
+#define INTCHW_INTC1_SPIS_BITNUM 6 /* SPI slave interrupt */
+#define INTCHW_INTC1_I2CS_BITNUM 5 /* I2C slave interrupt */
+#define INTCHW_INTC1_I2CH_BITNUM 4 /* I2C host interrupt */
+#define INTCHW_INTC1_I2S1_BITNUM 3 /* I2S1 interrupt */
+#define INTCHW_INTC1_I2S0_BITNUM 2 /* I2S0 interrupt */
+#define INTCHW_INTC1_GPIO1_BITNUM 1 /* GPIO bit 64//32 combined interrupt */
+#define INTCHW_INTC1_GPIO0_BITNUM 0 /* GPIO bit 31//0 combined interrupt */
+
+#define INTCHW_INTC1_DDRVPMT (1<<INTCHW_INTC1_DDRVPMT_BITNUM)
+#define INTCHW_INTC1_DDRVPMP (1<<INTCHW_INTC1_DDRVPMP_BITNUM)
+#define INTCHW_INTC1_DDRP (1<<INTCHW_INTC1_DDRP_BITNUM)
+#define INTCHW_INTC1_VDEC (1<<INTCHW_INTC1_VDEC_BITNUM)
+#define INTCHW_INTC1_SPUM (1<<INTCHW_INTC1_SPUM_BITNUM)
+#define INTCHW_INTC1_RTC2 (1<<INTCHW_INTC1_RTC2_BITNUM)
+#define INTCHW_INTC1_RTC1 (1<<INTCHW_INTC1_RTC1_BITNUM)
+#define INTCHW_INTC1_RTC0 (1<<INTCHW_INTC1_RTC0_BITNUM)
+#define INTCHW_INTC1_RNG (1<<INTCHW_INTC1_RNG_BITNUM)
+#define INTCHW_INTC1_FMPU (1<<INTCHW_INTC1_FMPU_BITNUM)
+#define INTCHW_INTC1_IMPU (1<<INTCHW_INTC1_IMPU_BITNUM)
+#define INTCHW_INTC1_DMPU (1<<INTCHW_INTC1_DMPU_BITNUM)
+#define INTCHW_INTC1_KEYC (1<<INTCHW_INTC1_KEYC_BITNUM)
+#define INTCHW_INTC1_TSC (1<<INTCHW_INTC1_TSC_BITNUM)
+#define INTCHW_INTC1_UART0 (1<<INTCHW_INTC1_UART0_BITNUM)
+#define INTCHW_INTC1_WDOG (1<<INTCHW_INTC1_WDOG_BITNUM)
+#define INTCHW_INTC1_UART1 (1<<INTCHW_INTC1_UART1_BITNUM)
+#define INTCHW_INTC1_PMUIRQ (1<<INTCHW_INTC1_PMUIRQ_BITNUM)
+#define INTCHW_INTC1_COMMRX (1<<INTCHW_INTC1_COMMRX_BITNUM)
+#define INTCHW_INTC1_COMMTX (1<<INTCHW_INTC1_COMMTX_BITNUM)
+#define INTCHW_INTC1_FLASHC (1<<INTCHW_INTC1_FLASHC_BITNUM)
+#define INTCHW_INTC1_GPHY (1<<INTCHW_INTC1_GPHY_BITNUM)
+#define INTCHW_INTC1_SPIS (1<<INTCHW_INTC1_SPIS_BITNUM)
+#define INTCHW_INTC1_I2CS (1<<INTCHW_INTC1_I2CS_BITNUM)
+#define INTCHW_INTC1_I2CH (1<<INTCHW_INTC1_I2CH_BITNUM)
+#define INTCHW_INTC1_I2S1 (1<<INTCHW_INTC1_I2S1_BITNUM)
+#define INTCHW_INTC1_I2S0 (1<<INTCHW_INTC1_I2S0_BITNUM)
+#define INTCHW_INTC1_GPIO1 (1<<INTCHW_INTC1_GPIO1_BITNUM)
+#define INTCHW_INTC1_GPIO0 (1<<INTCHW_INTC1_GPIO0_BITNUM)
+
+/* SINTC secure int controller */
+#define INTCHW_SINTC_RTC2_BITNUM 15 /* Real time clock tamper interrupt */
+#define INTCHW_SINTC_TIMER3_BITNUM 14 /* Secure timer3 interrupt */
+#define INTCHW_SINTC_TIMER2_BITNUM 13 /* Secure timer2 interrupt */
+#define INTCHW_SINTC_TIMER1_BITNUM 12 /* Secure timer1 interrupt */
+#define INTCHW_SINTC_TIMER0_BITNUM 11 /* Secure timer0 interrupt */
+#define INTCHW_SINTC_SPUM_BITNUM 10 /* Secure process module interrupt */
+#define INTCHW_SINTC_RTC1_BITNUM 9 /* Real time clock one-shot interrupt */
+#define INTCHW_SINTC_RTC0_BITNUM 8 /* Real time clock periodic interrupt */
+#define INTCHW_SINTC_RNG_BITNUM 7 /* Random number generator interrupt */
+#define INTCHW_SINTC_FMPU_BITNUM 6 /* Flash memory parition unit interrupt */
+#define INTCHW_SINTC_VMPU_BITNUM 5 /* VRAM memory partition interrupt */
+#define INTCHW_SINTC_DMPU_BITNUM 4 /* DDR2 memory partition interrupt */
+#define INTCHW_SINTC_KEYC_BITNUM 3 /* Key pad controller interrupt */
+#define INTCHW_SINTC_TSC_BITNUM 2 /* Touch screen controller interrupt */
+#define INTCHW_SINTC_UART0_BITNUM 1 /* UART0 interrupt */
+#define INTCHW_SINTC_WDOG_BITNUM 0 /* Watchdog timer interrupt */
+
+#define INTCHW_SINTC_TIMER3 (1<<INTCHW_SINTC_TIMER3_BITNUM)
+#define INTCHW_SINTC_TIMER2 (1<<INTCHW_SINTC_TIMER2_BITNUM)
+#define INTCHW_SINTC_TIMER1 (1<<INTCHW_SINTC_TIMER1_BITNUM)
+#define INTCHW_SINTC_TIMER0 (1<<INTCHW_SINTC_TIMER0_BITNUM)
+#define INTCHW_SINTC_SPUM (1<<INTCHW_SINTC_SPUM_BITNUM)
+#define INTCHW_SINTC_RTC2 (1<<INTCHW_SINTC_RTC2_BITNUM)
+#define INTCHW_SINTC_RTC1 (1<<INTCHW_SINTC_RTC1_BITNUM)
+#define INTCHW_SINTC_RTC0 (1<<INTCHW_SINTC_RTC0_BITNUM)
+#define INTCHW_SINTC_RNG (1<<INTCHW_SINTC_RNG_BITNUM)
+#define INTCHW_SINTC_FMPU (1<<INTCHW_SINTC_FMPU_BITNUM)
+#define INTCHW_SINTC_IMPU (1<<INTCHW_SINTC_IMPU_BITNUM)
+#define INTCHW_SINTC_DMPU (1<<INTCHW_SINTC_DMPU_BITNUM)
+#define INTCHW_SINTC_KEYC (1<<INTCHW_SINTC_KEYC_BITNUM)
+#define INTCHW_SINTC_TSC (1<<INTCHW_SINTC_TSC_BITNUM)
+#define INTCHW_SINTC_UART0 (1<<INTCHW_SINTC_UART0_BITNUM)
+#define INTCHW_SINTC_WDOG (1<<INTCHW_SINTC_WDOG_BITNUM)
+
+/* PL192 Vectored Interrupt Controller (VIC) layout */
+#define INTCHW_IRQSTATUS 0x00 /* IRQ status register */
+#define INTCHW_FIQSTATUS 0x04 /* FIQ status register */
+#define INTCHW_RAWINTR 0x08 /* Raw Interrupt Status register */
+#define INTCHW_INTSELECT 0x0c /* Interrupt Select Register */
+#define INTCHW_INTENABLE 0x10 /* Interrupt Enable Register */
+#define INTCHW_INTENCLEAR 0x14 /* Interrupt Enable Clear Register */
+#define INTCHW_SOFTINT 0x18 /* Soft Interrupt Register */
+#define INTCHW_SOFTINTCLEAR 0x1c /* Soft Interrupt Clear Register */
+#define INTCHW_PROTECTION 0x20 /* Protection Enable Register */
+#define INTCHW_SWPRIOMASK 0x24 /* Software Priority Mask Register */
+#define INTCHW_PRIODAISY 0x28 /* Priority Daisy Chain Register */
+#define INTCHW_VECTADDR0 0x100 /* Vector Address Registers */
+#define INTCHW_VECTPRIO0 0x200 /* Vector Priority Registers 0-31 */
+#define INTCHW_ADDRESS 0xf00 /* Vector Address Register 0-31 */
+#define INTCHW_PID 0xfe0 /* Peripheral ID Register 0-3 */
+#define INTCHW_PCELLID 0xff0 /* PrimeCell ID Register 0-3 */
+
+/* Example Usage: intcHw_irq_enable(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/* intcHw_irq_clear(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/* uint32_t bits = intcHw_irq_status(INTCHW_INTC0); */
+/* uint32_t bits = intcHw_irq_raw_status(INTCHW_INTC0); */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+/* Clear one or more IRQ interrupts. */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask)
+{
+ __REG32(basep + INTCHW_INTENCLEAR) = mask;
+}
+
+/* Enables one or more IRQ interrupts. */
+static inline void intcHw_irq_enable(void *basep, uint32_t mask)
+{
+ __REG32(basep + INTCHW_INTENABLE) = mask;
+}
+
+#endif /* _INTCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
new file mode 100644
index 000000000000..86bb58d4f58c
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
@@ -0,0 +1,101 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file mm_addr.h
+*
+* @brief Memory Map address defintions
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef _MM_ADDR_H
+#define _MM_ADDR_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/* Memory Map address definitions */
+
+#define MM_ADDR_DDR 0x00000000
+
+#define MM_ADDR_IO_VPM_EXTMEM_RSVD 0x0F000000 /* 16 MB - Reserved external memory for VPM use */
+
+#define MM_ADDR_IO_FLASHC 0x20000000
+#define MM_ADDR_IO_BROM 0x30000000
+#define MM_ADDR_IO_ARAM 0x30100000 /* 64 KB - extra cycle latency - WS switch */
+#define MM_ADDR_IO_DMA0 0x30200000
+#define MM_ADDR_IO_DMA1 0x30300000
+#define MM_ADDR_IO_ESW 0x30400000
+#define MM_ADDR_IO_CLCD 0x30500000
+#define MM_ADDR_IO_PIF 0x30580000
+#define MM_ADDR_IO_APM 0x30600000
+#define MM_ADDR_IO_SPUM 0x30700000
+#define MM_ADDR_IO_VPM_PROG 0x30800000
+#define MM_ADDR_IO_VPM_DATA 0x30A00000
+#define MM_ADDR_IO_VRAM 0x40000000 /* 64 KB - security block in front of it */
+#define MM_ADDR_IO_CHIPC 0x80000000
+#define MM_ADDR_IO_UMI 0x80001000
+#define MM_ADDR_IO_NAND 0x80001800
+#define MM_ADDR_IO_LEDM 0x80002000
+#define MM_ADDR_IO_PWM 0x80002040
+#define MM_ADDR_IO_VINTC 0x80003000
+#define MM_ADDR_IO_GPIO0 0x80004000
+#define MM_ADDR_IO_GPIO1 0x80004800
+#define MM_ADDR_IO_I2CS 0x80005000
+#define MM_ADDR_IO_SPIS 0x80006000
+#define MM_ADDR_IO_HPM 0x80007400
+#define MM_ADDR_IO_HPM_REMAP 0x80007800
+#define MM_ADDR_IO_TZPC 0x80008000
+#define MM_ADDR_IO_MPU 0x80009000
+#define MM_ADDR_IO_SPUMP 0x8000a000
+#define MM_ADDR_IO_PKA 0x8000b000
+#define MM_ADDR_IO_RNG 0x8000c000
+#define MM_ADDR_IO_KEYC 0x8000d000
+#define MM_ADDR_IO_BBL 0x8000e000
+#define MM_ADDR_IO_OTP 0x8000f000
+#define MM_ADDR_IO_I2S0 0x80010000
+#define MM_ADDR_IO_I2S1 0x80011000
+#define MM_ADDR_IO_UARTA 0x80012000
+#define MM_ADDR_IO_UARTB 0x80013000
+#define MM_ADDR_IO_I2CH 0x80014020
+#define MM_ADDR_IO_SPIH 0x80015000
+#define MM_ADDR_IO_TSC 0x80016000
+#define MM_ADDR_IO_TMR 0x80017000
+#define MM_ADDR_IO_WATCHDOG 0x80017800
+#define MM_ADDR_IO_ETM 0x80018000
+#define MM_ADDR_IO_DDRC 0x80019000
+#define MM_ADDR_IO_SINTC 0x80100000
+#define MM_ADDR_IO_INTC0 0x80200000
+#define MM_ADDR_IO_INTC1 0x80201000
+#define MM_ADDR_IO_GE 0x80300000
+#define MM_ADDR_IO_USB_CTLR0 0x80400000
+#define MM_ADDR_IO_USB_CTLR1 0x80410000
+#define MM_ADDR_IO_USB_PHY 0x80420000
+#define MM_ADDR_IO_SDIOH0 0x80500000
+#define MM_ADDR_IO_SDIOH1 0x80600000
+#define MM_ADDR_IO_VDEC 0x80700000
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_ADDR_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
new file mode 100644
index 000000000000..de92ec6a01aa
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
@@ -0,0 +1,147 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file mm_io.h
+*
+* @brief Memory Map I/O definitions
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef _MM_IO_H
+#define _MM_IO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/mm_addr.h>
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(CONFIG_MMU)
+
+/* This macro is referenced in <mach/io.h>
+ * Phys to Virtual 0xNyxxxxxx => 0xFNxxxxxx
+ * This macro is referenced in <asm/arch/io.h>
+ *
+ * Assume VPM address is the last x MB of memory. For VPM, map to
+ * 0xf0000000 and up.
+ */
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#ifdef __ASSEMBLY__
+#define MM_IO_PHYS_TO_VIRT(phys) (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))
+#else
+#define MM_IO_PHYS_TO_VIRT(phys) (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
+ (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)))
+#endif
+#endif
+
+/* Virtual to Physical 0xFNxxxxxx => 0xN0xxxxxx */
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#ifdef __ASSEMBLY__
+#define MM_IO_VIRT_TO_PHYS(virt) ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))
+#else
+#define MM_IO_VIRT_TO_PHYS(virt) (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
+ ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)))
+#endif
+#endif
+
+#else
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#define MM_IO_PHYS_TO_VIRT(phys) (phys)
+#endif
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#define MM_IO_VIRT_TO_PHYS(virt) (virt)
+#endif
+
+#endif
+
+/* Registers in 0xExxxxxxx that should be moved to 0xFxxxxxxx */
+#define MM_IO_BASE_FLASHC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_FLASHC)
+#define MM_IO_BASE_NAND MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_NAND)
+#define MM_IO_BASE_UMI MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UMI)
+
+#define MM_IO_START MM_ADDR_IO_FLASHC /* Physical beginning of IO mapped memory */
+#define MM_IO_BASE MM_IO_BASE_FLASHC /* Virtual beginning of IO mapped memory */
+
+#define MM_IO_BASE_BROM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BROM)
+#define MM_IO_BASE_ARAM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ARAM)
+#define MM_IO_BASE_DMA0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA0)
+#define MM_IO_BASE_DMA1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA1)
+#define MM_IO_BASE_ESW MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ESW)
+#define MM_IO_BASE_CLCD MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CLCD)
+#define MM_IO_BASE_PIF MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PIF)
+#define MM_IO_BASE_APM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_APM)
+#define MM_IO_BASE_SPUM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUM)
+#define MM_IO_BASE_VPM_PROG MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_PROG)
+#define MM_IO_BASE_VPM_DATA MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_DATA)
+
+#define MM_IO_BASE_VRAM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VRAM)
+
+#define MM_IO_BASE_CHIPC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CHIPC)
+#define MM_IO_BASE_DDRC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DDRC)
+#define MM_IO_BASE_LEDM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_LEDM)
+#define MM_IO_BASE_PWM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PWM)
+#define MM_IO_BASE_VINTC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VINTC)
+#define MM_IO_BASE_GPIO0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO0)
+#define MM_IO_BASE_GPIO1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO1)
+#define MM_IO_BASE_TMR MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TMR)
+#define MM_IO_BASE_WATCHDOG MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_WATCHDOG)
+#define MM_IO_BASE_ETM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ETM)
+#define MM_IO_BASE_HPM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM)
+#define MM_IO_BASE_HPM_REMAP MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM_REMAP)
+#define MM_IO_BASE_TZPC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TZPC)
+#define MM_IO_BASE_MPU MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_MPU)
+#define MM_IO_BASE_SPUMP MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUMP)
+#define MM_IO_BASE_PKA MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PKA)
+#define MM_IO_BASE_RNG MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_RNG)
+#define MM_IO_BASE_KEYC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_KEYC)
+#define MM_IO_BASE_BBL MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BBL)
+#define MM_IO_BASE_OTP MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_OTP)
+#define MM_IO_BASE_I2S0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S0)
+#define MM_IO_BASE_I2S1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S1)
+#define MM_IO_BASE_UARTA MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTA)
+#define MM_IO_BASE_UARTB MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTB)
+#define MM_IO_BASE_I2CH MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CH)
+#define MM_IO_BASE_SPIH MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIH)
+#define MM_IO_BASE_TSC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TSC)
+#define MM_IO_BASE_I2CS MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CS)
+#define MM_IO_BASE_SPIS MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIS)
+#define MM_IO_BASE_SINTC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SINTC)
+#define MM_IO_BASE_INTC0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC0)
+#define MM_IO_BASE_INTC1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC1)
+#define MM_IO_BASE_GE MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GE)
+#define MM_IO_BASE_USB_CTLR0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR0)
+#define MM_IO_BASE_USB_CTLR1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR1)
+#define MM_IO_BASE_USB_PHY MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_PHY)
+#define MM_IO_BASE_SDIOH0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH0)
+#define MM_IO_BASE_SDIOH1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH1)
+#define MM_IO_BASE_VDEC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VDEC)
+
+#define MM_IO_BASE_VPM_EXTMEM_RSVD MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_EXTMEM_RSVD)
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_IO_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
new file mode 100644
index 000000000000..d15f5f3ec2d8
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
@@ -0,0 +1,100 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file secHw_def.h
+*
+* @brief Definitions for configuring/testing secure blocks
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_DEF_H
+#define SECHW_DEF_H
+
+#include <mach/csp/mm_io.h>
+
+/* Bit mask for various secure device */
+#define secHw_BLK_MASK_CHIP_CONTROL 0x00000001
+#define secHw_BLK_MASK_KEY_SCAN 0x00000002
+#define secHw_BLK_MASK_TOUCH_SCREEN 0x00000004
+#define secHw_BLK_MASK_UART0 0x00000008
+#define secHw_BLK_MASK_UART1 0x00000010
+#define secHw_BLK_MASK_WATCHDOG 0x00000020
+#define secHw_BLK_MASK_SPUM 0x00000040
+#define secHw_BLK_MASK_DDR2 0x00000080
+#define secHw_BLK_MASK_EXT_MEM 0x00000100
+#define secHw_BLK_MASK_ESW 0x00000200
+#define secHw_BLK_MASK_SPU 0x00010000
+#define secHw_BLK_MASK_PKA 0x00020000
+#define secHw_BLK_MASK_RNG 0x00040000
+#define secHw_BLK_MASK_RTC 0x00080000
+#define secHw_BLK_MASK_OTP 0x00100000
+#define secHw_BLK_MASK_BOOT 0x00200000
+#define secHw_BLK_MASK_MPU 0x00400000
+#define secHw_BLK_MASK_TZCTRL 0x00800000
+#define secHw_BLK_MASK_INTR 0x01000000
+
+/* Trustzone register set */
+typedef struct {
+ volatile uint32_t status; /* read only - reflects status of writes of 2 write registers */
+ volatile uint32_t setUnsecure; /* write only. reads back as 0 */
+ volatile uint32_t setSecure; /* write only. reads back as 0 */
+} secHw_TZREG_t;
+
+/* There are 2 register sets. The first is for the lower 16 bits, the 2nd */
+/* is for the higher 16 bits. */
+
+typedef enum {
+ secHw_IDX_LS = 0,
+ secHw_IDX_MS = 1,
+ secHw_IDX_NUM
+} secHw_IDX_e;
+
+typedef struct {
+ volatile secHw_TZREG_t reg[secHw_IDX_NUM];
+} secHw_REGS_t;
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void);
+
+#include <mach/csp/secHw_inline.h>
+
+#endif /* SECHW_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
new file mode 100644
index 000000000000..9cd6a032ab71
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
@@ -0,0 +1,79 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file secHw_inline.h
+*
+* @brief Definitions for configuring/testing secure blocks
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_INLINE_H
+#define SECHW_INLINE_H
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ ) {
+ secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+ if (mask & 0x0000FFFF) {
+ regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF;
+ }
+
+ if (mask & 0xFFFF0000) {
+ regp->reg[secHw_IDX_MS].setSecure = mask >> 16;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ ) {
+ secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+ if (mask & 0x0000FFFF) {
+ regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF;
+ }
+ if (mask & 0xFFFF0000) {
+ regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void)
+{
+ secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+ return (regp->reg[1].status << 16) + regp->reg[0].status;
+}
+
+#endif /* SECHW_INLINE_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
new file mode 100644
index 000000000000..3080ac7239a1
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
@@ -0,0 +1,82 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file tmrHw_reg.h
+*
+* @brief Definitions for low level Timer registers
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_REG_H
+#define _TMRHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <mach/csp/hw_cfg.h>
+/* Base address */
+#define tmrHw_MODULE_BASE_ADDR MM_IO_BASE_TMR
+
+/*
+This platform has four different timers running at different clock speed
+
+Timer one (Timer ID 0) runs at 25 MHz
+Timer two (Timer ID 1) runs at 25 MHz
+Timer three (Timer ID 2) runs at 150 MHz
+Timer four (Timer ID 3) runs at 150 MHz
+*/
+#define tmrHw_LOW_FREQUENCY_MHZ 25 /* Always 25MHz from XTAL */
+#define tmrHw_LOW_FREQUENCY_HZ 25000000
+
+#if defined(CFG_GLOBAL_CHIP) && (CFG_GLOBAL_CHIP == FPGA11107)
+#define tmrHw_HIGH_FREQUENCY_MHZ 150 /* Always 150MHz for FPGA */
+#define tmrHw_HIGH_FREQUENCY_HZ 150000000
+#else
+#define tmrHw_HIGH_FREQUENCY_HZ HW_CFG_BUS_CLK_HZ
+#define tmrHw_HIGH_FREQUENCY_MHZ (HW_CFG_BUS_CLK_HZ / 1000000)
+#endif
+
+#define tmrHw_LOW_RESOLUTION_CLOCK tmrHw_LOW_FREQUENCY_HZ
+#define tmrHw_HIGH_RESOLUTION_CLOCK tmrHw_HIGH_FREQUENCY_HZ
+#define tmrHw_MAX_COUNT (0xFFFFFFFF) /* maximum number of count a timer can count */
+#define tmrHw_TIMER_NUM_COUNT (4) /* Number of timer module supported */
+
+typedef struct {
+ uint32_t LoadValue; /* Load value for timer */
+ uint32_t CurrentValue; /* Current value for timer */
+ uint32_t Control; /* Control register */
+ uint32_t InterruptClear; /* Interrupt clear register */
+ uint32_t RawInterruptStatus; /* Raw interrupt status */
+ uint32_t InterruptStatus; /* Masked interrupt status */
+ uint32_t BackgroundLoad; /* Background load value */
+ uint32_t padding; /* Padding register */
+} tmrHw_REG_t;
+
+/* Control bot masks */
+#define tmrHw_CONTROL_TIMER_ENABLE 0x00000080
+#define tmrHw_CONTROL_PERIODIC 0x00000040
+#define tmrHw_CONTROL_INTERRUPT_ENABLE 0x00000020
+#define tmrHw_CONTROL_PRESCALE_MASK 0x0000000C
+#define tmrHw_CONTROL_PRESCALE_1 0x00000000
+#define tmrHw_CONTROL_PRESCALE_16 0x00000004
+#define tmrHw_CONTROL_PRESCALE_256 0x00000008
+#define tmrHw_CONTROL_32BIT 0x00000002
+#define tmrHw_CONTROL_ONESHOT 0x00000001
+#define tmrHw_CONTROL_FREE_RUNNING 0x00000000
+
+#define tmrHw_CONTROL_MODE_MASK (tmrHw_CONTROL_PERIODIC | tmrHw_CONTROL_ONESHOT)
+
+#define pTmrHw ((volatile tmrHw_REG_t *)tmrHw_MODULE_BASE_ADDR)
+
+#endif /* _TMRHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
new file mode 100644
index 000000000000..847980c85c88
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -0,0 +1,826 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dma.h
+*
+* @brief API definitions for the linux DMA interface.
+*/
+/****************************************************************************/
+
+#if !defined(ASM_ARM_ARCH_BCMRING_DMA_H)
+#define ASM_ARM_ARCH_BCMRING_DMA_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/semaphore.h>
+#include <csp/dmacHw.h>
+#include <mach/timer.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+
+/* ---- Constants and Types ---------------------------------------------- */
+
+/* If DMA_DEBUG_TRACK_RESERVATION is set to a non-zero value, then the filename */
+/* and line number of the reservation request will be recorded in the channel table */
+
+#define DMA_DEBUG_TRACK_RESERVATION 1
+
+#define DMA_NUM_CONTROLLERS 2
+#define DMA_NUM_CHANNELS 8 /* per controller */
+
+typedef enum {
+ DMA_DEVICE_MEM_TO_MEM, /* For memory to memory transfers */
+ DMA_DEVICE_I2S0_DEV_TO_MEM,
+ DMA_DEVICE_I2S0_MEM_TO_DEV,
+ DMA_DEVICE_I2S1_DEV_TO_MEM,
+ DMA_DEVICE_I2S1_MEM_TO_DEV,
+ DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM,
+ DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV,
+ DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM,
+ DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV,
+ DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM, /* Additional mic input for beam-forming */
+ DMA_DEVICE_APM_PCM0_DEV_TO_MEM,
+ DMA_DEVICE_APM_PCM0_MEM_TO_DEV,
+ DMA_DEVICE_APM_PCM1_DEV_TO_MEM,
+ DMA_DEVICE_APM_PCM1_MEM_TO_DEV,
+ DMA_DEVICE_SPUM_DEV_TO_MEM,
+ DMA_DEVICE_SPUM_MEM_TO_DEV,
+ DMA_DEVICE_SPIH_DEV_TO_MEM,
+ DMA_DEVICE_SPIH_MEM_TO_DEV,
+ DMA_DEVICE_UART_A_DEV_TO_MEM,
+ DMA_DEVICE_UART_A_MEM_TO_DEV,
+ DMA_DEVICE_UART_B_DEV_TO_MEM,
+ DMA_DEVICE_UART_B_MEM_TO_DEV,
+ DMA_DEVICE_PIF_MEM_TO_DEV,
+ DMA_DEVICE_PIF_DEV_TO_MEM,
+ DMA_DEVICE_ESW_DEV_TO_MEM,
+ DMA_DEVICE_ESW_MEM_TO_DEV,
+ DMA_DEVICE_VPM_MEM_TO_MEM,
+ DMA_DEVICE_CLCD_MEM_TO_MEM,
+ DMA_DEVICE_NAND_MEM_TO_MEM,
+ DMA_DEVICE_MEM_TO_VRAM,
+ DMA_DEVICE_VRAM_TO_MEM,
+
+ /* Add new entries before this line. */
+
+ DMA_NUM_DEVICE_ENTRIES,
+ DMA_DEVICE_NONE = 0xff, /* Special value to indicate that no device is currently assigned. */
+
+} DMA_Device_t;
+
+/****************************************************************************
+*
+* The DMA_Handle_t is the primary object used by callers of the API.
+*
+*****************************************************************************/
+
+#define DMA_INVALID_HANDLE ((DMA_Handle_t) -1)
+
+typedef int DMA_Handle_t;
+
+/****************************************************************************
+*
+* The DMA_DescriptorRing_t contains a ring of descriptors which is used
+* to point to regions of memory.
+*
+*****************************************************************************/
+
+typedef struct {
+ void *virtAddr; /* Virtual Address of the descriptor ring */
+ dma_addr_t physAddr; /* Physical address of the descriptor ring */
+ int descriptorsAllocated; /* Number of descriptors allocated in the descriptor ring */
+ size_t bytesAllocated; /* Number of bytes allocated in the descriptor ring */
+
+} DMA_DescriptorRing_t;
+
+/****************************************************************************
+*
+* The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
+* DMA chains from a variety of memory sources.
+*
+*****************************************************************************/
+
+#define DMA_MEM_MAP_MIN_SIZE 4096 /* Pages less than this size are better */
+ /* off not being DMA'd. */
+
+typedef enum {
+ DMA_MEM_TYPE_NONE, /* Not a valid setting */
+ DMA_MEM_TYPE_VMALLOC, /* Memory came from vmalloc call */
+ DMA_MEM_TYPE_KMALLOC, /* Memory came from kmalloc call */
+ DMA_MEM_TYPE_DMA, /* Memory came from dma_alloc_xxx call */
+ DMA_MEM_TYPE_USER, /* Memory came from user space. */
+
+} DMA_MemType_t;
+
+/* A segment represents a physically and virtually contiguous chunk of memory. */
+/* i.e. each segment can be DMA'd */
+/* A user of the DMA code will add memory regions. Each region may need to be */
+/* represented by one or more segments. */
+
+typedef struct {
+ void *virtAddr; /* Virtual address used for this segment */
+ dma_addr_t physAddr; /* Physical address this segment maps to */
+ size_t numBytes; /* Size of the segment, in bytes */
+
+} DMA_Segment_t;
+
+/* A region represents a virtually contiguous chunk of memory, which may be */
+/* made up of multiple segments. */
+
+typedef struct {
+ DMA_MemType_t memType;
+ void *virtAddr;
+ size_t numBytes;
+
+ /* Each region (virtually contiguous) consists of one or more segments. Each */
+ /* segment is virtually and physically contiguous. */
+
+ int numSegmentsUsed;
+ int numSegmentsAllocated;
+ DMA_Segment_t *segment;
+
+ /* When a region corresponds to user memory, we need to lock all of the pages */
+ /* down before we can figure out the physical addresses. The lockedPage array contains */
+ /* the pages that were locked, and which subsequently need to be unlocked once the */
+ /* memory is unmapped. */
+
+ unsigned numLockedPages;
+ struct page **lockedPages;
+
+} DMA_Region_t;
+
+typedef struct {
+ int inUse; /* Is this mapping currently being used? */
+ struct semaphore lock; /* Acquired when using this structure */
+ enum dma_data_direction dir; /* Direction this transfer is intended for */
+
+ /* In the event that we're mapping user memory, we need to know which task */
+ /* the memory is for, so that we can obtain the correct mm locks. */
+
+ struct task_struct *userTask;
+
+ int numRegionsUsed;
+ int numRegionsAllocated;
+ DMA_Region_t *region;
+
+} DMA_MemMap_t;
+
+/****************************************************************************
+*
+* The DMA_DeviceAttribute_t contains information which describes a
+* particular DMA device (or peripheral).
+*
+* It is anticipated that the arrary of DMA_DeviceAttribute_t's will be
+* statically initialized.
+*
+*****************************************************************************/
+
+/* The device handler is called whenever a DMA operation completes. The reaon */
+/* for it to be called will be a bitmask with one or more of the following bits */
+/* set. */
+
+#define DMA_HANDLER_REASON_BLOCK_COMPLETE dmacHw_INTERRUPT_STATUS_BLOCK
+#define DMA_HANDLER_REASON_TRANSFER_COMPLETE dmacHw_INTERRUPT_STATUS_TRANS
+#define DMA_HANDLER_REASON_ERROR dmacHw_INTERRUPT_STATUS_ERROR
+
+typedef void (*DMA_DeviceHandler_t) (DMA_Device_t dev, int reason,
+ void *userData);
+
+#define DMA_DEVICE_FLAG_ON_DMA0 0x00000001
+#define DMA_DEVICE_FLAG_ON_DMA1 0x00000002
+#define DMA_DEVICE_FLAG_PORT_PER_DMAC 0x00000004 /* If set, it means that the port used on DMAC0 is different from the port used on DMAC1 */
+#define DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST 0x00000008 /* If set, allocate from DMA1 before allocating from DMA0 */
+#define DMA_DEVICE_FLAG_IS_DEDICATED 0x00000100
+#define DMA_DEVICE_FLAG_NO_ISR 0x00000200
+#define DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO 0x00000400
+#define DMA_DEVICE_FLAG_IN_USE 0x00000800 /* If set, device is in use on a channel */
+
+/* Note: Some DMA devices can be used from multiple DMA Controllers. The bitmask is used to */
+/* determine which DMA controllers a given device can be used from, and the interface */
+/* array determeines the actual interface number to use for a given controller. */
+
+typedef struct {
+ uint32_t flags; /* Bitmask of DMA_DEVICE_FLAG_xxx constants */
+ uint8_t dedicatedController; /* Controller number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+ uint8_t dedicatedChannel; /* Channel number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+ const char *name; /* Will show up in the /proc entry */
+
+ uint32_t dmacPort[DMA_NUM_CONTROLLERS]; /* Specifies the port number when DMA_DEVICE_FLAG_PORT_PER_DMAC flag is set */
+
+ dmacHw_CONFIG_t config; /* Configuration to use when DMA'ing using this device */
+
+ void *userData; /* Passed to the devHandler */
+ DMA_DeviceHandler_t devHandler; /* Called when DMA operations finish. */
+
+ timer_tick_count_t transferStartTime; /* Time the current transfer was started */
+
+ /* The following statistical information will be collected and presented in a proc entry. */
+ /* Note: With a contiuous bandwidth of 1 Gb/sec, it would take 584 years to overflow */
+ /* a 64 bit counter. */
+
+ uint64_t numTransfers; /* Number of DMA transfers performed */
+ uint64_t transferTicks; /* Total time spent doing DMA transfers (measured in timer_tick_count_t's) */
+ uint64_t transferBytes; /* Total bytes transferred */
+ uint32_t timesBlocked; /* Number of times a channel was unavailable */
+ uint32_t numBytes; /* Last transfer size */
+
+ /* It's not possible to free memory which is allocated for the descriptors from within */
+ /* the ISR. So make the presumption that a given device will tend to use the */
+ /* same sized buffers over and over again, and we keep them around. */
+
+ DMA_DescriptorRing_t ring; /* Ring of descriptors allocated for this device */
+
+ /* We stash away some of the information from the previous transfer. If back-to-back */
+ /* transfers are performed from the same buffer, then we don't have to keep re-initializing */
+ /* the descriptor buffers. */
+
+ uint32_t prevNumBytes;
+ dma_addr_t prevSrcData;
+ dma_addr_t prevDstData;
+
+} DMA_DeviceAttribute_t;
+
+/****************************************************************************
+*
+* DMA_Channel_t, DMA_Controller_t, and DMA_State_t are really internal
+* data structures and don't belong in this header file, but are included
+* merely for discussion.
+*
+* By the time this is implemented, these structures will be moved out into
+* the appropriate C source file instead.
+*
+*****************************************************************************/
+
+/****************************************************************************
+*
+* The DMA_Channel_t contains state information about each DMA channel. Some
+* of the channels are dedicated. Non-dedicated channels are shared
+* amongst the other devices.
+*
+*****************************************************************************/
+
+#define DMA_CHANNEL_FLAG_IN_USE 0x00000001
+#define DMA_CHANNEL_FLAG_IS_DEDICATED 0x00000002
+#define DMA_CHANNEL_FLAG_NO_ISR 0x00000004
+#define DMA_CHANNEL_FLAG_LARGE_FIFO 0x00000008
+
+typedef struct {
+ uint32_t flags; /* bitmask of DMA_CHANNEL_FLAG_xxx constants */
+ DMA_Device_t devType; /* Device this channel is currently reserved for */
+ DMA_Device_t lastDevType; /* Device type that used this previously */
+ char name[20]; /* Name passed onto request_irq */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ const char *fileName; /* Place where channel reservation took place */
+ int lineNum; /* Place where channel reservation took place */
+#endif
+ dmacHw_HANDLE_t dmacHwHandle; /* low level channel handle. */
+
+} DMA_Channel_t;
+
+/****************************************************************************
+*
+* The DMA_Controller_t contains state information about each DMA controller.
+*
+* The freeChannelQ is stored in the controller data structure rather than
+* the channel data structure since several of the devices are accessible
+* from multiple controllers, and there is no way to know which controller
+* will become available first.
+*
+*****************************************************************************/
+
+typedef struct {
+ DMA_Channel_t channel[DMA_NUM_CHANNELS];
+
+} DMA_Controller_t;
+
+/****************************************************************************
+*
+* The DMA_Global_t contains all of the global state information used by
+* the DMA code.
+*
+* Callers which need to allocate a shared channel will be queued up
+* on the freeChannelQ until a channel becomes available.
+*
+*****************************************************************************/
+
+typedef struct {
+ struct semaphore lock; /* acquired when manipulating table entries */
+ wait_queue_head_t freeChannelQ;
+
+ DMA_Controller_t controller[DMA_NUM_CONTROLLERS];
+
+} DMA_Global_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+
+extern DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES];
+
+/* ---- Function Prototypes ---------------------------------------------- */
+
+#if defined(__KERNEL__)
+
+/****************************************************************************/
+/**
+* Initializes the DMA module.
+*
+* @return
+* 0 - Success
+* < 0 - Error
+*/
+/****************************************************************************/
+
+int dma_init(void);
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg(DMA_Device_t dev, const char *fileName,
+ int lineNum);
+#define dma_request_channel(dev) dma_request_channel_dbg(dev, __FILE__, __LINE__)
+#else
+
+/****************************************************************************/
+/**
+* Reserves a channel for use with @a dev. If the device is setup to use
+* a shared channel, then this function will block until a free channel
+* becomes available.
+*
+* @return
+* >= 0 - A valid DMA Handle.
+* -EBUSY - Device is currently being used.
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+DMA_Handle_t dma_request_channel(DMA_Device_t dev /* Device to use with the allocated channel. */
+ );
+#endif
+
+/****************************************************************************/
+/**
+* Frees a previously allocated DMA Handle.
+*
+* @return
+* 0 - DMA Handle was released successfully.
+* -EINVAL - Invalid DMA handle
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t channel /* DMA handle. */
+ );
+
+/****************************************************************************/
+/**
+* Determines if a given device has been configured as using a shared
+* channel.
+*
+* @return boolean
+* 0 Device uses a dedicated channel
+* non-zero Device uses a shared channel
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t dev /* Device to check. */
+ );
+
+/****************************************************************************/
+/**
+* Allocates memory to hold a descriptor ring. The descriptor ring then
+* needs to be populated by making one or more calls to
+* dna_add_descriptors.
+*
+* The returned descriptor ring will be automatically initialized.
+*
+* @return
+* 0 Descriptor ring was allocated successfully
+* -ENOMEM Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to populate */
+ int numDescriptors /* Number of descriptors that need to be allocated. */
+ );
+
+/****************************************************************************/
+/**
+* Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring /* Descriptor to release */
+ );
+
+/****************************************************************************/
+/**
+* Initializes a descriptor ring, so that descriptors can be added to it.
+* Once a descriptor ring has been allocated, it may be reinitialized for
+* use with additional/different regions of memory.
+*
+* Note that if 7 descriptors are allocated, it's perfectly acceptable to
+* initialize the ring with a smaller number of descriptors. The amount
+* of memory allocated for the descriptor ring will not be reduced, and
+* the descriptor ring may be reinitialized later
+*
+* @return
+* 0 Descriptor ring was initialized successfully
+* -ENOMEM The descriptor which was passed in has insufficient space
+* to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to initialize */
+ int numDescriptors /* Number of descriptors to initialize. */
+ );
+
+/****************************************************************************/
+/**
+* Determines the number of descriptors which would be required for a
+* transfer of the indicated memory region.
+*
+* This function also needs to know which DMA device this transfer will
+* be destined for, so that the appropriate DMA configuration can be retrieved.
+* DMA parameters such as transfer width, and whether this is a memory-to-memory
+* or memory-to-peripheral, etc can all affect the actual number of descriptors
+* required.
+*
+* @return
+* > 0 Returns the number of descriptors required for the indicated transfer
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device, /* DMA Device that this will be associated with */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ );
+
+/****************************************************************************/
+/**
+* Adds a region of memory to the descriptor ring. Note that it may take
+* multiple descriptors for each region of memory. It is the callers
+* responsibility to allocate a sufficiently large descriptor ring.
+*
+* @return
+* 0 Descriptors were added successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring, /* Descriptor ring to add descriptors to */
+ DMA_Device_t device, /* DMA Device that descriptors are for */
+ dma_addr_t srcData, /* Place to get data (memory or device) */
+ dma_addr_t dstData, /* Place to put data (memory or device) */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ );
+
+/****************************************************************************/
+/**
+* Sets the descriptor ring associated with a device.
+*
+* Once set, the descriptor ring will be associated with the device, even
+* across channel request/free calls. Passing in a NULL descriptor ring
+* will release any descriptor ring currently associated with the device.
+*
+* Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+* the descriptor ring may be released and reallocated.
+*
+* Note: This function will release the descriptor memory for any current
+* descriptor ring associated with this device.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device, /* Device to update the descriptor ring for. */
+ DMA_DescriptorRing_t *ring /* Descriptor ring to add descriptors to */
+ );
+
+/****************************************************************************/
+/**
+* Retrieves the descriptor ring associated with a device.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device, /* Device to retrieve the descriptor ring for. */
+ DMA_DescriptorRing_t *ring /* Place to store retrieved ring */
+ );
+
+/****************************************************************************/
+/**
+* Allocates buffers for the descriptors. This is normally done automatically
+* but needs to be done explicitly when initiating a dma from interrupt
+* context.
+*
+* @return
+* 0 Descriptors were allocated successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle, /* DMA Handle */
+ dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ );
+
+/****************************************************************************/
+/**
+* Allocates and sets up descriptors for a double buffered circular buffer.
+*
+* This is primarily intended to be used for things like the ingress samples
+* from a microphone.
+*
+* @return
+* > 0 Number of descriptors actually allocated.
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */
+ dma_addr_t srcData, /* Physical address of source data */
+ dma_addr_t dstData1, /* Physical address of first destination buffer */
+ dma_addr_t dstData2, /* Physical address of second destination buffer */
+ size_t numBytes /* Number of bytes in each destination buffer */
+ );
+
+/****************************************************************************/
+/**
+* Initializes a DMA_MemMap_t data structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
+ );
+
+/****************************************************************************/
+/**
+* Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
+ );
+
+/****************************************************************************/
+/**
+* Looks at a memory address and categorizes it.
+*
+* @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr);
+
+/****************************************************************************/
+/**
+* Sets the process (aka userTask) associated with a mem map. This is
+* required if user-mode segments will be added to the mapping.
+*/
+/****************************************************************************/
+
+static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
+ struct task_struct *task)
+{
+ memMap->userTask = task;
+}
+
+/****************************************************************************/
+/**
+* Looks at a memory address and determines if we support DMA'ing to/from
+* that type of memory.
+*
+* @return boolean -
+* return value != 0 means dma supported
+* return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr);
+
+/****************************************************************************/
+/**
+* Initializes a memory map for use. Since this function acquires a
+* sempaphore within the memory map, it is VERY important that dma_unmap
+* be called when you're finished using the map.
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ enum dma_data_direction dir /* Direction that the mapping will be going */
+ );
+
+/****************************************************************************/
+/**
+* Adds a segment of memory to a memory map.
+*
+* @return 0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ void *mem, /* Virtual address that we want to get a map of */
+ size_t numBytes /* Number of bytes being mapped */
+ );
+
+/****************************************************************************/
+/**
+* Creates a descriptor ring from a memory mapping.
+*
+* @return 0 on sucess, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
+ DMA_MemMap_t *memMap, /* Memory map that will be used */
+ dma_addr_t devPhysAddr /* Physical address of device */
+ );
+
+/****************************************************************************/
+/**
+* Maps in a memory region such that it can be used for performing a DMA.
+*
+* @return
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ void *addr, /* Virtual address that we want to get a map of */
+ size_t count, /* Number of bytes being mapped */
+ enum dma_data_direction dir /* Direction that the mapping will be going */
+ );
+
+/****************************************************************************/
+/**
+* Maps in a memory region such that it can be used for performing a DMA.
+*
+* @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ int dirtied /* non-zero if any of the pages were modified */
+ );
+
+/****************************************************************************/
+/**
+* Initiates a transfer when the descriptors have already been setup.
+*
+* This is a special case, and normally, the dma_transfer_xxx functions should
+* be used.
+*
+* @return
+* 0 Transfer was started successfully
+* -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+* Stops a previously started DMA transfer.
+*
+* @return
+* 0 Transfer was stopped successfully
+* -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+* Waits for a DMA to complete by polling. This function is only intended
+* to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+* Initiates a DMA transfer
+*
+* @return
+* 0 Transfer was started successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle, /* DMA Handle */
+ dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ );
+
+/****************************************************************************/
+/**
+* Initiates a transfer from memory to a device.
+*
+* @return
+* 0 Transfer was started successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_to_device(DMA_Handle_t handle, /* DMA Handle */
+ dma_addr_t srcData, /* Place to get data to write to device (physical address) */
+ dma_addr_t dstData, /* Pointer to device data address (physical address) */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ ) {
+ return dma_transfer(handle,
+ dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+* Initiates a transfer from a device to memory.
+*
+* @return
+* 0 Transfer was started successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_from_device(DMA_Handle_t handle, /* DMA Handle */
+ dma_addr_t srcData, /* Pointer to the device data address (physical address) */
+ dma_addr_t dstData, /* Place to store data retrieved from the device (physical address) */
+ size_t numBytes /* Number of bytes to retrieve from the device */
+ ) {
+ return dma_transfer(handle,
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+* Initiates a memory to memory transfer.
+*
+* @return
+* 0 Transfer was started successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device wasn't DMA_DEVICE_MEM_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_mem_to_mem(DMA_Handle_t handle, /* DMA Handle */
+ dma_addr_t srcData, /* Place to transfer data from (physical address) */
+ dma_addr_t dstData, /* Place to transfer data to (physical address) */
+ size_t numBytes /* Number of bytes to transfer */
+ ) {
+ return dma_transfer(handle,
+ dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+ srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+* Set the callback function which will be called when a transfer completes.
+* If a NULL callback function is set, then no callback will occur.
+*
+* @note @a devHandler will be called from IRQ context.
+*
+* @return
+* 0 - Success
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. */
+ DMA_DeviceHandler_t devHandler, /* Function to call when the DMA completes */
+ void *userData /* Pointer which will be passed to devHandler. */
+ );
+
+#endif
+
+#endif /* ASM_ARM_ARCH_BCMRING_DMA_H */
diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S
new file mode 100644
index 000000000000..7d393ca010ac
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S
@@ -0,0 +1,86 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+ *
+ * Low-level IRQ helper macros for BCMRing-based platforms
+ *
+ */
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =(MM_IO_BASE_INTC0)
+ ldr \irqstat, [\base, #0] @ get status
+ ldr \irqnr, [\base, #0x10] @ mask with enable register
+ ands \irqstat, \irqstat, \irqnr
+ mov \irqnr, #IRQ_INTC0_START
+ cmp \irqstat, #0
+ bne 1001f
+
+ ldr \base, =(MM_IO_BASE_INTC1)
+ ldr \irqstat, [\base, #0] @ get status
+ ldr \irqnr, [\base, #0x10] @ mask with enable register
+ ands \irqstat, \irqstat, \irqnr
+ mov \irqnr, #IRQ_INTC1_START
+ cmp \irqstat, #0
+ bne 1001f
+
+ ldr \base, =(MM_IO_BASE_SINTC)
+ ldr \irqstat, [\base, #0] @ get status
+ ldr \irqnr, [\base, #0x10] @ mask with enable register
+ ands \irqstat, \irqstat, \irqnr
+ mov \irqnr, #0xffffffff @ code meaning no interrupt bits set
+ cmp \irqstat, #0
+ beq 1002f
+
+ mov \irqnr, #IRQ_SINTC_START @ something is set, so fixup return value
+
+1001:
+ movs \tmp, \irqstat, lsl #16
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #16
+
+ movs \tmp, \irqstat, lsl #8
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #8
+
+ movs \tmp, \irqstat, lsl #4
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #4
+
+ movs \tmp, \irqstat, lsl #2
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #2
+
+ movs \tmp, \irqstat, lsl #1
+ addeq \irqnr, \irqnr, #1
+ orrs \base, \base, #1
+
+1002: @ irqnr will be set to 0xffffffff if no irq bits are set
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro irq_prio_table
+ .endm
+
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
new file mode 100644
index 000000000000..447eb340c611
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -0,0 +1,60 @@
+/*
+ *
+ * This file contains the hardware definitions of the BCMRing.
+ *
+ * Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/memory.h>
+#include <cfg_global.h>
+#include <mach/csp/mm_io.h>
+
+/* Hardware addresses of major areas.
+ * *_START is the physical address
+ * *_SIZE is the size of the region
+ * *_BASE is the virtual address
+ */
+#define RAM_START PHYS_OFFSET
+
+#define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
+#define RAM_BASE PAGE_OFFSET
+
+#define pcibios_assign_all_busses() 1
+
+/* Macros to make managing spinlocks a bit more controlled in terms of naming. */
+/* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */
+#if defined(__KERNEL__)
+#define HW_DECLARE_SPINLOCK(name) DEFINE_SPINLOCK(bcmring_##name##_reg_lock);
+#define HW_EXTERN_SPINLOCK(name) extern spinlock_t bcmring_##name##_reg_lock;
+#define HW_IRQ_SAVE(name, val) spin_lock_irqsave(&bcmring_##name##_reg_lock, (val))
+#define HW_IRQ_RESTORE(name, val) spin_unlock_irqrestore(&bcmring_##name##_reg_lock, (val))
+#else
+#define HW_DECLARE_SPINLOCK(name)
+#define HW_EXTERN_SPINLOCK(name)
+#define HW_IRQ_SAVE(name, val) {(void)(name); (void)(val); }
+#define HW_IRQ_RESTORE(name, val) {(void)(name); (void)(val); }
+#endif
+
+#ifndef HW_IO_PHYS_TO_VIRT
+#define HW_IO_PHYS_TO_VIRT MM_IO_PHYS_TO_VIRT
+#endif
+#define HW_IO_VIRT_TO_PHYS MM_IO_VIRT_TO_PHYS
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
new file mode 100644
index 000000000000..4db0eff90357
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -0,0 +1,56 @@
+/*
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
+
+/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
+/* happen in readw/writew etc. */
+
+#define readb(c) __raw_readb(c)
+#define readw(c) __raw_readw(c)
+#define readl(c) __raw_readl(c)
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define readsb(p, d, l) __raw_readsb(p, d, l)
+#define readsw(p, d, l) __raw_readsw(p, d, l)
+#define readsl(p, d, l) __raw_readsl(p, d, l)
+
+#define writeb(v, c) __raw_writeb(v, c)
+#define writew(v, c) __raw_writew(v, c)
+#define writel(v, c) __raw_writel(v, c)
+
+#define writesb(p, d, l) __raw_writesb(p, d, l)
+#define writesw(p, d, l) __raw_writesw(p, d, l)
+#define writesl(p, d, l) __raw_writesl(p, d, l)
+
+#define memset_io(c, v, l) _memset_io((c), (v), (l))
+#define memcpy_fromio(a, c, l) _memcpy_fromio((a), (c), (l))
+#define memcpy_toio(c, a, l) _memcpy_toio((c), (a), (l))
+
+#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/irqs.h b/arch/arm/mach-bcmring/include/mach/irqs.h
new file mode 100644
index 000000000000..b279b825d4a7
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/irqs.h
@@ -0,0 +1,132 @@
+/*
+ * Copyright (C) 2007 Broadcom
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#if !defined(ARCH_BCMRING_IRQS_H)
+#define ARCH_BCMRING_IRQS_H
+
+/* INTC0 - interrupt controller 0 */
+#define IRQ_INTC0_START 0
+#define IRQ_DMA0C0 0 /* DMA0 channel 0 interrupt */
+#define IRQ_DMA0C1 1 /* DMA0 channel 1 interrupt */
+#define IRQ_DMA0C2 2 /* DMA0 channel 2 interrupt */
+#define IRQ_DMA0C3 3 /* DMA0 channel 3 interrupt */
+#define IRQ_DMA0C4 4 /* DMA0 channel 4 interrupt */
+#define IRQ_DMA0C5 5 /* DMA0 channel 5 interrupt */
+#define IRQ_DMA0C6 6 /* DMA0 channel 6 interrupt */
+#define IRQ_DMA0C7 7 /* DMA0 channel 7 interrupt */
+#define IRQ_DMA1C0 8 /* DMA1 channel 0 interrupt */
+#define IRQ_DMA1C1 9 /* DMA1 channel 1 interrupt */
+#define IRQ_DMA1C2 10 /* DMA1 channel 2 interrupt */
+#define IRQ_DMA1C3 11 /* DMA1 channel 3 interrupt */
+#define IRQ_DMA1C4 12 /* DMA1 channel 4 interrupt */
+#define IRQ_DMA1C5 13 /* DMA1 channel 5 interrupt */
+#define IRQ_DMA1C6 14 /* DMA1 channel 6 interrupt */
+#define IRQ_DMA1C7 15 /* DMA1 channel 7 interrupt */
+#define IRQ_VPM 16 /* Voice process module interrupt */
+#define IRQ_USBHD2 17 /* USB host2/device2 interrupt */
+#define IRQ_USBH1 18 /* USB1 host interrupt */
+#define IRQ_USBD 19 /* USB device interrupt */
+#define IRQ_SDIOH0 20 /* SDIO0 host interrupt */
+#define IRQ_SDIOH1 21 /* SDIO1 host interrupt */
+#define IRQ_TIMER0 22 /* Timer0 interrupt */
+#define IRQ_TIMER1 23 /* Timer1 interrupt */
+#define IRQ_TIMER2 24 /* Timer2 interrupt */
+#define IRQ_TIMER3 25 /* Timer3 interrupt */
+#define IRQ_SPIH 26 /* SPI host interrupt */
+#define IRQ_ESW 27 /* Ethernet switch interrupt */
+#define IRQ_APM 28 /* Audio process module interrupt */
+#define IRQ_GE 29 /* Graphic engine interrupt */
+#define IRQ_CLCD 30 /* LCD Controller interrupt */
+#define IRQ_PIF 31 /* Peripheral interface interrupt */
+#define IRQ_INTC0_END 31
+
+/* INTC1 - interrupt controller 1 */
+#define IRQ_INTC1_START 32
+#define IRQ_GPIO0 32 /* 0 GPIO bit 31//0 combined interrupt */
+#define IRQ_GPIO1 33 /* 1 GPIO bit 64//32 combined interrupt */
+#define IRQ_I2S0 34 /* 2 I2S0 interrupt */
+#define IRQ_I2S1 35 /* 3 I2S1 interrupt */
+#define IRQ_I2CH 36 /* 4 I2C host interrupt */
+#define IRQ_I2CS 37 /* 5 I2C slave interrupt */
+#define IRQ_SPIS 38 /* 6 SPI slave interrupt */
+#define IRQ_GPHY 39 /* 7 Gigabit Phy interrupt */
+#define IRQ_FLASHC 40 /* 8 Flash controller interrupt */
+#define IRQ_COMMTX 41 /* 9 ARM DDC transmit interrupt */
+#define IRQ_COMMRX 42 /* 10 ARM DDC receive interrupt */
+#define IRQ_PMUIRQ 43 /* 11 ARM performance monitor interrupt */
+#define IRQ_UARTB 44 /* 12 UARTB */
+#define IRQ_WATCHDOG 45 /* 13 Watchdog timer interrupt */
+#define IRQ_UARTA 46 /* 14 UARTA */
+#define IRQ_TSC 47 /* 15 Touch screen controller interrupt */
+#define IRQ_KEYC 48 /* 16 Key pad controller interrupt */
+#define IRQ_DMPU 49 /* 17 DDR2 memory partition interrupt */
+#define IRQ_VMPU 50 /* 18 VRAM memory partition interrupt */
+#define IRQ_FMPU 51 /* 19 Flash memory parition unit interrupt */
+#define IRQ_RNG 52 /* 20 Random number generator interrupt */
+#define IRQ_RTC0 53 /* 21 Real time clock periodic interrupt */
+#define IRQ_RTC1 54 /* 22 Real time clock one-shot interrupt */
+#define IRQ_SPUM 55 /* 23 Secure process module interrupt */
+#define IRQ_VDEC 56 /* 24 Hantro video decoder interrupt */
+#define IRQ_RTC2 57 /* 25 Real time clock tamper interrupt */
+#define IRQ_DDRP 58 /* 26 DDR Panic interrupt */
+#define IRQ_INTC1_END 58
+
+/* SINTC secure int controller */
+#define IRQ_SINTC_START 59
+#define IRQ_SEC_WATCHDOG 59 /* 0 Watchdog timer interrupt */
+#define IRQ_SEC_UARTA 60 /* 1 UARTA interrupt */
+#define IRQ_SEC_TSC 61 /* 2 Touch screen controller interrupt */
+#define IRQ_SEC_KEYC 62 /* 3 Key pad controller interrupt */
+#define IRQ_SEC_DMPU 63 /* 4 DDR2 memory partition interrupt */
+#define IRQ_SEC_VMPU 64 /* 5 VRAM memory partition interrupt */
+#define IRQ_SEC_FMPU 65 /* 6 Flash memory parition unit interrupt */
+#define IRQ_SEC_RNG 66 /* 7 Random number generator interrupt */
+#define IRQ_SEC_RTC0 67 /* 8 Real time clock periodic interrupt */
+#define IRQ_SEC_RTC1 68 /* 9 Real time clock one-shot interrupt */
+#define IRQ_SEC_SPUM 69 /* 10 Secure process module interrupt */
+#define IRQ_SEC_TIMER0 70 /* 11 Secure timer0 interrupt */
+#define IRQ_SEC_TIMER1 71 /* 12 Secure timer1 interrupt */
+#define IRQ_SEC_TIMER2 72 /* 13 Secure timer2 interrupt */
+#define IRQ_SEC_TIMER3 73 /* 14 Secure timer3 interrupt */
+#define IRQ_SEC_RTC2 74 /* 15 Real time clock tamper interrupt */
+
+#define IRQ_SINTC_END 74
+
+/* Note: there are 3 INTC registers of 32 bits each. So internal IRQs could go from 0-95 */
+/* Since IRQs are typically viewed in decimal, we start the gpio based IRQs off at 100 */
+/* to make the mapping easy for humans to decipher. */
+
+#define IRQ_GPIO_0 100
+
+#define NUM_INTERNAL_IRQS (IRQ_SINTC_END+1)
+
+/* I couldn't get the gpioHw_reg.h file to be included cleanly, so I hardcoded it */
+/* define NUM_GPIO_IRQS GPIOHW_TOTAL_NUM_PINS */
+#define NUM_GPIO_IRQS 62
+
+#define NR_IRQS (IRQ_GPIO_0 + NUM_GPIO_IRQS)
+
+#define IRQ_UNKNOWN -1
+
+/* Tune these bits to preclude noisy or unsupported interrupt sources as required. */
+#define IRQ_INTC0_VALID_MASK 0xffffffff
+#define IRQ_INTC1_VALID_MASK 0x07ffffff
+#define IRQ_SINTC_VALID_MASK 0x0000ffff
+
+#endif /* ARCH_BCMRING_IRQS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h
new file mode 100644
index 000000000000..114f942bb4f3
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <cfg_global.h>
+
+/*
+ * Physical vs virtual RAM address space conversion. These are
+ * private definitions which should NOT be used outside memory.h
+ * files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+
+#define PHYS_OFFSET CFG_GLOBAL_RAM_BASE
+
+/*
+ * Maximum DMA memory allowed is 14M
+ */
+#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/memory_settings.h b/arch/arm/mach-bcmring/include/mach/memory_settings.h
new file mode 100644
index 000000000000..ce5cd16f2ac4
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory_settings.h
@@ -0,0 +1,67 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef MEMORY_SETTINGS_H
+#define MEMORY_SETTINGS_H
+
+/* ---- Include Files ---------------------------------------- */
+/* ---- Constants and Types ---------------------------------- */
+
+/* Memory devices */
+/* NAND Flash timing for 166 MHz setting */
+#define HW_CFG_NAND_tBTA (5 << 16) /* Bus turnaround cycle (n) 0-7 (30 ns) */
+#define HW_CFG_NAND_tWP (4 << 11) /* Write pulse width cycle (n+1) 0-31 (25 ns) */
+#define HW_CFG_NAND_tWR (1 << 9) /* Write recovery cycle (n+1) 0-3 (10 ns) */
+#define HW_CFG_NAND_tAS (0 << 7) /* Write address setup cycle (n+1) 0-3 ( 0 ns) */
+#define HW_CFG_NAND_tOE (3 << 5) /* Output enable delay cycle (n) 0-3 (15 ns) */
+#define HW_CFG_NAND_tRC (7 << 0) /* Read access cycle (n+2) 0-31 (50 ns) */
+
+#define HW_CFG_NAND_TCR (HW_CFG_NAND_tBTA \
+ | HW_CFG_NAND_tWP \
+ | HW_CFG_NAND_tWR \
+ | HW_CFG_NAND_tAS \
+ | HW_CFG_NAND_tOE \
+ | HW_CFG_NAND_tRC)
+
+/* NOR Flash timing for 166 MHz setting */
+#define HW_CFG_NOR_TPRC_TWLC (0 << 19) /* Page read access cycle / Burst write latency (n+2 / n+1) (max 25ns) */
+#define HW_CFG_NOR_TBTA (0 << 16) /* Bus turnaround cycle (n) (DNA) */
+#define HW_CFG_NOR_TWP (6 << 11) /* Write pulse width cycle (n+1) (35ns) */
+#define HW_CFG_NOR_TWR (0 << 9) /* Write recovery cycle (n+1) (0ns) */
+#define HW_CFG_NOR_TAS (0 << 7) /* Write address setup cycle (n+1) (0ns) */
+#define HW_CFG_NOR_TOE (0 << 5) /* Output enable delay cycle (n) (max 25ns) */
+#define HW_CFG_NOR_TRC_TLC (0x10 << 0) /* Read access cycle / Burst read latency (n+2 / n+1) (100ns) */
+
+#define HW_CFG_FLASH0_TCR (HW_CFG_NOR_TPRC_TWLC \
+ | HW_CFG_NOR_TBTA \
+ | HW_CFG_NOR_TWP \
+ | HW_CFG_NOR_TWR \
+ | HW_CFG_NOR_TAS \
+ | HW_CFG_NOR_TOE \
+ | HW_CFG_NOR_TRC_TLC)
+
+#define HW_CFG_FLASH1_TCR HW_CFG_FLASH0_TCR
+#define HW_CFG_FLASH2_TCR HW_CFG_FLASH0_TCR
+
+/* SDRAM Settings */
+/* #define HW_CFG_SDRAM_CAS_LATENCY 5 Default 5, Values [3..6] */
+/* #define HW_CFG_SDRAM_CHIP_SELECT_CNT 1 Default 1, Vaules [1..2] */
+/* #define HW_CFG_SDRAM_SPEED_GRADE 667 Default 667, Values [400,533,667,800] */
+/* #define HW_CFG_SDRAM_WIDTH_BITS 16 Default 16, Vaules [8,16] */
+#define HW_CFG_SDRAM_SIZE_BYTES 0x10000000 /* Total memory, not per device size */
+
+/* ---- Variable Externs ------------------------------------- */
+/* ---- Function Prototypes ---------------------------------- */
+
+#endif /* MEMORY_SETTINGS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
new file mode 100644
index 000000000000..cdbf93c694a6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -0,0 +1,54 @@
+/*
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/csp/chipcHw_inline.h>
+
+extern int bcmring_arch_warm_reboot;
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, char *cmd)
+{
+ printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
+
+ if (mode == 'h') {
+ /* Reboot configured in proc entry */
+ if (bcmring_arch_warm_reboot) {
+ printk("warm reset\n");
+ /* Issue Warm reset (do not reset ethernet switch, keep alive) */
+ chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
+ } else {
+ /* Force reset of everything */
+ printk("force reset\n");
+ chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+ }
+ } else {
+ /* Force reset of everything */
+ printk("force reset\n");
+ chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+ }
+}
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/timer.h b/arch/arm/mach-bcmring/include/mach/timer.h
new file mode 100644
index 000000000000..5a94bbb032b6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timer.h
@@ -0,0 +1,77 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+*
+*****************************************************************************
+*
+* timer.h
+*
+* PURPOSE:
+*
+*
+*
+* NOTES:
+*
+*****************************************************************************/
+
+#if !defined(BCM_LINUX_TIMER_H)
+#define BCM_LINUX_TIMER_H
+
+#if defined(__KERNEL__)
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Constants and Types ---------------------------------------------- */
+
+typedef unsigned int timer_tick_count_t;
+typedef unsigned int timer_tick_rate_t;
+typedef unsigned int timer_msec_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+/* ---- Function Prototypes ---------------------------------------------- */
+
+/****************************************************************************
+*
+* timer_get_tick_count
+*
+*
+***************************************************************************/
+timer_tick_count_t timer_get_tick_count(void);
+
+/****************************************************************************
+*
+* timer_get_tick_rate
+*
+*
+***************************************************************************/
+timer_tick_rate_t timer_get_tick_rate(void);
+
+/****************************************************************************
+*
+* timer_get_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_get_msec(void);
+
+/****************************************************************************
+*
+* timer_ticks_to_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks);
+
+#endif /* __KERNEL__ */
+#endif /* BCM_LINUX_TIMER_H */
diff --git a/arch/arm/mach-bcmring/include/mach/timex.h b/arch/arm/mach-bcmring/include/mach/timex.h
new file mode 100644
index 000000000000..40d033ec5892
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ *
+ * Integrator architecture timex specifications
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * Specifies the number of ticks per second
+ */
+#define CLOCK_TICK_RATE 100000 /* REG_SMT_TICKS_PER_SEC */
diff --git a/arch/arm/mach-bcmring/include/mach/uncompress.h b/arch/arm/mach-bcmring/include/mach/uncompress.h
new file mode 100644
index 000000000000..9c9821b77977
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/uncompress.h
@@ -0,0 +1,43 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/mm_addr.h>
+
+#define BCMRING_UART_0_DR (*(volatile unsigned int *)MM_ADDR_IO_UARTA)
+#define BCMRING_UART_0_FR (*(volatile unsigned int *)(MM_ADDR_IO_UARTA + 0x18))
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+ /* Send out UARTA */
+ while (BCMRING_UART_0_FR & (1 << 5))
+ ;
+
+ BCMRING_UART_0_DR = c;
+}
+
+
+static inline void flush(void)
+{
+ /* Wait for the tx fifo to be empty */
+ while ((BCMRING_UART_0_FR & (1 << 7)) == 0)
+ ;
+
+ /* Wait for the final character to be sent on the txd line */
+ while (BCMRING_UART_0_FR & (1 << 3))
+ ;
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
new file mode 100644
index 000000000000..35e2ead8395c
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -0,0 +1,25 @@
+/*
+ *
+ * Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * Move VMALLOC_END to 0xf0000000 so that the vm space can range from
+ * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
+ * larger physical memory designs better.
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x30000000)
diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c
new file mode 100644
index 000000000000..dc1c4939b0ce
--- /dev/null
+++ b/arch/arm/mach-bcmring/irq.c
@@ -0,0 +1,127 @@
+/*
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+#include <mach/csp/intcHw_reg.h>
+#include <mach/csp/mm_io.h>
+
+static void bcmring_mask_irq0(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_INTC0_START),
+ MM_IO_BASE_INTC0 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq0(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_INTC0_START),
+ MM_IO_BASE_INTC0 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq1(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_INTC1_START),
+ MM_IO_BASE_INTC1 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq1(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_INTC1_START),
+ MM_IO_BASE_INTC1 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq2(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_SINTC_START),
+ MM_IO_BASE_SINTC + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq2(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_SINTC_START),
+ MM_IO_BASE_SINTC + INTCHW_INTENABLE);
+}
+
+static struct irq_chip bcmring_irq0_chip = {
+ .typename = "ARM-INTC0",
+ .ack = bcmring_mask_irq0,
+ .mask = bcmring_mask_irq0, /* mask a specific interrupt, blocking its delivery. */
+ .unmask = bcmring_unmask_irq0, /* unmaks an interrupt */
+};
+
+static struct irq_chip bcmring_irq1_chip = {
+ .typename = "ARM-INTC1",
+ .ack = bcmring_mask_irq1,
+ .mask = bcmring_mask_irq1,
+ .unmask = bcmring_unmask_irq1,
+};
+
+static struct irq_chip bcmring_irq2_chip = {
+ .typename = "ARM-SINTC",
+ .ack = bcmring_mask_irq2,
+ .mask = bcmring_mask_irq2,
+ .unmask = bcmring_unmask_irq2,
+};
+
+static void vic_init(void __iomem *base, struct irq_chip *chip,
+ unsigned int irq_start, unsigned int vic_sources)
+{
+ unsigned int i;
+ for (i = 0; i < 32; i++) {
+ unsigned int irq = irq_start + i;
+ set_irq_chip(irq, chip);
+ set_irq_chip_data(irq, base);
+
+ if (vic_sources & (1 << i)) {
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ }
+ writel(0, base + INTCHW_INTSELECT);
+ writel(0, base + INTCHW_INTENABLE);
+ writel(~0, base + INTCHW_INTENCLEAR);
+ writel(0, base + INTCHW_IRQSTATUS);
+ writel(~0, base + INTCHW_SOFTINTCLEAR);
+}
+
+void __init bcmring_init_irq(void)
+{
+ vic_init((void __iomem *)MM_IO_BASE_INTC0, &bcmring_irq0_chip,
+ IRQ_INTC0_START, IRQ_INTC0_VALID_MASK);
+ vic_init((void __iomem *)MM_IO_BASE_INTC1, &bcmring_irq1_chip,
+ IRQ_INTC1_START, IRQ_INTC1_VALID_MASK);
+ vic_init((void __iomem *)MM_IO_BASE_SINTC, &bcmring_irq2_chip,
+ IRQ_SINTC_START, IRQ_SINTC_VALID_MASK);
+
+ /* special cases */
+ if (INTCHW_INTC1_GPIO0 & IRQ_INTC1_VALID_MASK) {
+ set_irq_handler(IRQ_GPIO0, handle_simple_irq);
+ }
+ if (INTCHW_INTC1_GPIO1 & IRQ_INTC1_VALID_MASK) {
+ set_irq_handler(IRQ_GPIO1, handle_simple_irq);
+ }
+}
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
new file mode 100644
index 000000000000..0f1c37e4523a
--- /dev/null
+++ b/arch/arm/mach-bcmring/mm.c
@@ -0,0 +1,56 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+#define IO_DESC(va, sz) { .virtual = va, \
+ .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+ .length = sz, \
+ .type = MT_DEVICE }
+
+#define MEM_DESC(va, sz) { .virtual = va, \
+ .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+ .length = sz, \
+ .type = MT_MEMORY }
+
+static struct map_desc bcmring_io_desc[] __initdata = {
+ IO_DESC(MM_IO_BASE_NAND, SZ_64K), /* phys:0x28000000-0x28000FFF virt:0xE8000000-0xE8000FFF size:0x00010000 */
+ IO_DESC(MM_IO_BASE_UMI, SZ_64K), /* phys:0x2C000000-0x2C000FFF virt:0xEC000000-0xEC000FFF size:0x00010000 */
+
+ IO_DESC(MM_IO_BASE_BROM, SZ_64K), /* phys:0x30000000-0x3000FFFF virt:0xF3000000-0xF300FFFF size:0x00010000 */
+ MEM_DESC(MM_IO_BASE_ARAM, SZ_1M), /* phys:0x31000000-0x31FFFFFF virt:0xF3100000-0xF31FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_DMA0, SZ_1M), /* phys:0x32000000-0x32FFFFFF virt:0xF3200000-0xF32FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_DMA1, SZ_1M), /* phys:0x33000000-0x33FFFFFF virt:0xF3300000-0xF33FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_ESW, SZ_1M), /* phys:0x34000000-0x34FFFFFF virt:0xF3400000-0xF34FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_CLCD, SZ_1M), /* phys:0x35000000-0x35FFFFFF virt:0xF3500000-0xF35FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_APM, SZ_1M), /* phys:0x36000000-0x36FFFFFF virt:0xF3600000-0xF36FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_SPUM, SZ_1M), /* phys:0x37000000-0x37FFFFFF virt:0xF3700000-0xF37FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_VPM_PROG, SZ_1M), /* phys:0x38000000-0x38FFFFFF virt:0xF3800000-0xF38FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_VPM_DATA, SZ_1M), /* phys:0x3A000000-0x3AFFFFFF virt:0xF3A00000-0xF3AFFFFF size:0x01000000 */
+
+ IO_DESC(MM_IO_BASE_VRAM, SZ_64K), /* phys:0x40000000-0x4000FFFF virt:0xF4000000-0xF400FFFF size:0x00010000 */
+ IO_DESC(MM_IO_BASE_CHIPC, SZ_16M), /* phys:0x80000000-0x80FFFFFF virt:0xF8000000-0xF8FFFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_VPM_EXTMEM_RSVD,
+ SZ_16M), /* phys:0x0F000000-0x0FFFFFFF virt:0xF0000000-0xF0FFFFFF size:0x01000000 */
+};
+
+void __init bcmring_map_io(void)
+{
+
+ iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
+}
diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c
new file mode 100644
index 000000000000..2d415d2a8e68
--- /dev/null
+++ b/arch/arm/mach-bcmring/timer.c
@@ -0,0 +1,62 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <csp/tmrHw.h>
+
+#include <mach/timer.h>
+/* The core.c file initializes timers 1 and 3 as a linux clocksource. */
+/* The real time clock should probably be the real linux clocksource. */
+/* In the meantime, this file should agree with core.c as to the */
+/* profiling timer. If the clocksource is moved to rtc later, then */
+/* we can init the profiling timer here instead. */
+
+/* Timer 1 provides 25MHz resolution syncrhonized to scheduling and APM timing */
+/* Timer 3 provides bus freqeuncy sychronized to ACLK, but spread spectrum will */
+/* affect synchronization with scheduling and APM timing. */
+
+#define PROF_TIMER 1
+
+timer_tick_rate_t timer_get_tick_rate(void)
+{
+ return tmrHw_getCountRate(PROF_TIMER);
+}
+
+timer_tick_count_t timer_get_tick_count(void)
+{
+ return tmrHw_GetCurrentCount(PROF_TIMER); /* change downcounter to upcounter */
+}
+
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks)
+{
+ static int tickRateMsec;
+
+ if (tickRateMsec == 0) {
+ tickRateMsec = timer_get_tick_rate() / 1000;
+ }
+
+ return ticks / tickRateMsec;
+}
+
+timer_msec_t timer_get_msec(void)
+{
+ return timer_ticks_to_msec(timer_get_tick_count());
+}
+
+EXPORT_SYMBOL(timer_get_tick_count);
+EXPORT_SYMBOL(timer_ticks_to_msec);
+EXPORT_SYMBOL(timer_get_tick_rate);
+EXPORT_SYMBOL(timer_get_msec);
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 3fbd9b0fbe24..caf6d5154aec 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -12,18 +12,15 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
#include <mach/hardware.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
static struct physmap_flash_data adssphere_flash_data = {
.width = 4,
};
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 6c4c1633ed12..3dd0e2a23095 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -22,48 +22,39 @@
#include <mach/hardware.h>
-/*
- * The EP93xx has two external crystal oscillators. To generate the
- * required high-frequency clocks, the processor uses two phase-locked-
- * loops (PLLs) to multiply the incoming external clock signal to much
- * higher frequencies that are then divided down by programmable dividers
- * to produce the needed clocks. The PLLs operate independently of one
- * another.
- */
-#define EP93XX_EXT_CLK_RATE 14745600
-#define EP93XX_EXT_RTC_RATE 32768
-
-
struct clk {
unsigned long rate;
int users;
int sw_locked;
- u32 enable_reg;
+ void __iomem *enable_reg;
u32 enable_mask;
unsigned long (*get_rate)(struct clk *clk);
+ int (*set_rate)(struct clk *clk, unsigned long rate);
};
static unsigned long get_uart_rate(struct clk *clk);
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
+
static struct clk clk_uart1 = {
.sw_locked = 1,
- .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
- .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+ .enable_reg = EP93XX_SYSCON_DEVCFG,
+ .enable_mask = EP93XX_SYSCON_DEVCFG_U1EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart2 = {
.sw_locked = 1,
- .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
- .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+ .enable_reg = EP93XX_SYSCON_DEVCFG,
+ .enable_mask = EP93XX_SYSCON_DEVCFG_U2EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart3 = {
.sw_locked = 1,
- .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
- .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+ .enable_reg = EP93XX_SYSCON_DEVCFG,
+ .enable_mask = EP93XX_SYSCON_DEVCFG_U3EN,
.get_rate = get_uart_rate,
};
static struct clk clk_pll1;
@@ -75,6 +66,15 @@ static struct clk clk_usb_host = {
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN,
};
+static struct clk clk_keypad = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_KEYTCHCLKDIV,
+ .enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
+ .set_rate = set_keytchclk_rate,
+};
+static struct clk clk_pwm = {
+ .rate = EP93XX_EXT_CLK_RATE,
+};
/* DMA Clocks */
static struct clk clk_m2p0 = {
@@ -130,27 +130,29 @@ static struct clk clk_m2m1 = {
{ .dev_id = dev, .con_id = con, .clk = ck }
static struct clk_lookup clocks[] = {
- INIT_CK("apb:uart1", NULL, &clk_uart1),
- INIT_CK("apb:uart2", NULL, &clk_uart2),
- INIT_CK("apb:uart3", NULL, &clk_uart3),
- INIT_CK(NULL, "pll1", &clk_pll1),
- INIT_CK(NULL, "fclk", &clk_f),
- INIT_CK(NULL, "hclk", &clk_h),
- INIT_CK(NULL, "pclk", &clk_p),
- INIT_CK(NULL, "pll2", &clk_pll2),
- INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
- INIT_CK(NULL, "m2p0", &clk_m2p0),
- INIT_CK(NULL, "m2p1", &clk_m2p1),
- INIT_CK(NULL, "m2p2", &clk_m2p2),
- INIT_CK(NULL, "m2p3", &clk_m2p3),
- INIT_CK(NULL, "m2p4", &clk_m2p4),
- INIT_CK(NULL, "m2p5", &clk_m2p5),
- INIT_CK(NULL, "m2p6", &clk_m2p6),
- INIT_CK(NULL, "m2p7", &clk_m2p7),
- INIT_CK(NULL, "m2p8", &clk_m2p8),
- INIT_CK(NULL, "m2p9", &clk_m2p9),
- INIT_CK(NULL, "m2m0", &clk_m2m0),
- INIT_CK(NULL, "m2m1", &clk_m2m1),
+ INIT_CK("apb:uart1", NULL, &clk_uart1),
+ INIT_CK("apb:uart2", NULL, &clk_uart2),
+ INIT_CK("apb:uart3", NULL, &clk_uart3),
+ INIT_CK(NULL, "pll1", &clk_pll1),
+ INIT_CK(NULL, "fclk", &clk_f),
+ INIT_CK(NULL, "hclk", &clk_h),
+ INIT_CK(NULL, "pclk", &clk_p),
+ INIT_CK(NULL, "pll2", &clk_pll2),
+ INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
+ INIT_CK("ep93xx-keypad", NULL, &clk_keypad),
+ INIT_CK(NULL, "pwm_clk", &clk_pwm),
+ INIT_CK(NULL, "m2p0", &clk_m2p0),
+ INIT_CK(NULL, "m2p1", &clk_m2p1),
+ INIT_CK(NULL, "m2p2", &clk_m2p2),
+ INIT_CK(NULL, "m2p3", &clk_m2p3),
+ INIT_CK(NULL, "m2p4", &clk_m2p4),
+ INIT_CK(NULL, "m2p5", &clk_m2p5),
+ INIT_CK(NULL, "m2p6", &clk_m2p6),
+ INIT_CK(NULL, "m2p7", &clk_m2p7),
+ INIT_CK(NULL, "m2p8", &clk_m2p8),
+ INIT_CK(NULL, "m2p9", &clk_m2p9),
+ INIT_CK(NULL, "m2m0", &clk_m2m0),
+ INIT_CK(NULL, "m2m1", &clk_m2m1),
};
@@ -160,9 +162,11 @@ int clk_enable(struct clk *clk)
u32 value;
value = __raw_readl(clk->enable_reg);
+ value |= clk->enable_mask;
if (clk->sw_locked)
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(value | clk->enable_mask, clk->enable_reg);
+ ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+ else
+ __raw_writel(value, clk->enable_reg);
}
return 0;
@@ -175,9 +179,11 @@ void clk_disable(struct clk *clk)
u32 value;
value = __raw_readl(clk->enable_reg);
+ value &= ~clk->enable_mask;
if (clk->sw_locked)
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(value & ~clk->enable_mask, clk->enable_reg);
+ ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+ else
+ __raw_writel(value, clk->enable_reg);
}
}
EXPORT_SYMBOL(clk_disable);
@@ -202,6 +208,43 @@ unsigned long clk_get_rate(struct clk *clk)
}
EXPORT_SYMBOL(clk_get_rate);
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
+{
+ u32 val;
+ u32 div_bit;
+
+ val = __raw_readl(clk->enable_reg);
+
+ /*
+ * The Key Matrix and ADC clocks are configured using the same
+ * System Controller register. The clock used will be either
+ * 1/4 or 1/16 the external clock rate depending on the
+ * EP93XX_SYSCON_KEYTCHCLKDIV_KDIV/EP93XX_SYSCON_KEYTCHCLKDIV_ADIV
+ * bit being set or cleared.
+ */
+ div_bit = clk->enable_mask >> 15;
+
+ if (rate == EP93XX_KEYTCHCLK_DIV4)
+ val |= div_bit;
+ else if (rate == EP93XX_KEYTCHCLK_DIV16)
+ val &= ~div_bit;
+ else
+ return -EINVAL;
+
+ ep93xx_syscon_swlocked_write(val, clk->enable_reg);
+ clk->rate = rate;
+ return 0;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ if (clk->set_rate)
+ return clk->set_rate(clk, rate);
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 204dc5cbd0b8..16b92c37ec99 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -16,40 +16,24 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
+#include <linux/platform_device.h>
#include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
#include <linux/dma-mapping.h>
-#include <linux/time.h>
#include <linux/timex.h>
-#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <linux/termios.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
-#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
#include <asm/hardware/vic.h>
@@ -98,7 +82,7 @@ void __init ep93xx_map_io(void)
*/
static unsigned int last_jiffy_time;
-#define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
{
@@ -362,8 +346,8 @@ void __init ep93xx_init_irq(void)
{
int gpio_irq;
- vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
- vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
+ vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+ vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
for (gpio_irq = gpio_to_irq(0);
gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
@@ -385,6 +369,47 @@ void __init ep93xx_init_irq(void)
/*************************************************************************
+ * EP93xx System Controller Software Locked register handling
+ *************************************************************************/
+
+/*
+ * syscon_swlock prevents anything else from writing to the syscon
+ * block while a software locked register is being written.
+ */
+static DEFINE_SPINLOCK(syscon_swlock);
+
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&syscon_swlock, flags);
+
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+ __raw_writel(val, reg);
+
+ spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_syscon_swlocked_write);
+
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
+{
+ unsigned long flags;
+ unsigned int val;
+
+ spin_lock_irqsave(&syscon_swlock, flags);
+
+ val = __raw_readl(EP93XX_SYSCON_DEVCFG);
+ val |= set_bits;
+ val &= ~clear_bits;
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+ __raw_writel(val, EP93XX_SYSCON_DEVCFG);
+
+ spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
+
+
+/*************************************************************************
* EP93xx peripheral handling
*************************************************************************/
#define EP93XX_UART_MCR_OFFSET (0x0100)
@@ -517,10 +542,8 @@ static struct platform_device ep93xx_eth_device = {
void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
{
- if (copy_addr) {
- memcpy(data->dev_addr,
- (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
- }
+ if (copy_addr)
+ memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
ep93xx_eth_data = *data;
platform_device_register(&ep93xx_eth_device);
@@ -546,19 +569,125 @@ void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
platform_device_register(&ep93xx_i2c_device);
}
+
+/*************************************************************************
+ * EP93xx LEDs
+ *************************************************************************/
+static struct gpio_led ep93xx_led_pins[] = {
+ {
+ .name = "platform:grled",
+ .gpio = EP93XX_GPIO_LINE_GRLED,
+ }, {
+ .name = "platform:rdled",
+ .gpio = EP93XX_GPIO_LINE_RDLED,
+ },
+};
+
+static struct gpio_led_platform_data ep93xx_led_data = {
+ .num_leds = ARRAY_SIZE(ep93xx_led_pins),
+ .leds = ep93xx_led_pins,
+};
+
+static struct platform_device ep93xx_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ep93xx_led_data,
+ },
+};
+
+
+/*************************************************************************
+ * EP93xx pwm peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_pwm0_resource[] = {
+ {
+ .start = EP93XX_PWM_PHYS_BASE,
+ .end = EP93XX_PWM_PHYS_BASE + 0x10 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ep93xx_pwm0_device = {
+ .name = "ep93xx-pwm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ep93xx_pwm0_resource),
+ .resource = ep93xx_pwm0_resource,
+};
+
+static struct resource ep93xx_pwm1_resource[] = {
+ {
+ .start = EP93XX_PWM_PHYS_BASE + 0x20,
+ .end = EP93XX_PWM_PHYS_BASE + 0x30 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ep93xx_pwm1_device = {
+ .name = "ep93xx-pwm",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(ep93xx_pwm1_resource),
+ .resource = ep93xx_pwm1_resource,
+};
+
+void __init ep93xx_register_pwm(int pwm0, int pwm1)
+{
+ if (pwm0)
+ platform_device_register(&ep93xx_pwm0_device);
+
+ /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
+ if (pwm1)
+ platform_device_register(&ep93xx_pwm1_device);
+}
+
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
+{
+ int err;
+
+ if (pdev->id == 0) {
+ err = 0;
+ } else if (pdev->id == 1) {
+ err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
+ dev_name(&pdev->dev));
+ if (err)
+ return err;
+ err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
+ if (err)
+ goto fail;
+
+ /* PWM 1 output on EGPIO[14] */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
+ } else {
+ err = -ENODEV;
+ }
+
+ return err;
+
+fail:
+ gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+ return err;
+}
+EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
+
+void ep93xx_pwm_release_gpio(struct platform_device *pdev)
+{
+ if (pdev->id == 1) {
+ gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
+ gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+
+ /* EGPIO[14] used for GPIO */
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
+ }
+}
+EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
+
+
extern void ep93xx_gpio_init(void);
void __init ep93xx_init_devices(void)
{
- unsigned int v;
-
- /*
- * Disallow access to MaverickCrunch initially.
- */
- v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
- v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
+ /* Disallow access to MaverickCrunch initially */
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
ep93xx_gpio_init();
@@ -568,4 +697,5 @@ void __init ep93xx_init_devices(void)
platform_device_register(&ep93xx_rtc_device);
platform_device_register(&ep93xx_ohci_device);
+ platform_device_register(&ep93xx_leds);
}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index e9e45b92457e..73145ae5d3fa 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -26,18 +26,16 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <linux/io.h>
#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
#include <mach/hardware.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
static struct physmap_flash_data edb93xx_flash_data;
static struct resource edb93xx_flash_resource = {
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 3bad500b71b6..3da7ca816d19 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -12,18 +12,15 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
#include <mach/hardware.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
static struct physmap_flash_data gesbc9312_flash_data = {
.width = 4,
};
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 482cf3d2fbcd..1ea8871e03a9 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -17,15 +17,16 @@
#include <linux/module.h>
#include <linux/seq_file.h>
#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
-#include <mach/ep93xx-regs.h>
-#include <asm/gpio.h>
+#include <mach/hardware.h>
struct ep93xx_gpio_chip {
struct gpio_chip chip;
- unsigned int data_reg;
- unsigned int data_dir_reg;
+ void __iomem *data_reg;
+ void __iomem *data_dir_reg;
};
#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
@@ -111,15 +112,61 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
u8 data_reg, data_dir_reg;
- int i;
+ int gpio, i;
data_reg = __raw_readb(ep93xx_chip->data_reg);
data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg);
- for (i = 0; i < chip->ngpio; i++)
- seq_printf(s, "GPIO %s%d: %s %s\n", chip->label, i,
- (data_reg & (1 << i)) ? "set" : "clear",
- (data_dir_reg & (1 << i)) ? "out" : "in");
+ gpio = ep93xx_chip->chip.base;
+ for (i = 0; i < chip->ngpio; i++, gpio++) {
+ int is_out = data_dir_reg & (1 << i);
+
+ seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s",
+ chip->label, i, gpio,
+ gpiochip_is_requested(chip, i) ? : "",
+ is_out ? "out" : "in ",
+ (data_reg & (1 << i)) ? "hi" : "lo");
+
+ if (!is_out) {
+ int irq = gpio_to_irq(gpio);
+ struct irq_desc *desc = irq_desc + irq;
+
+ if (irq >= 0 && desc->action) {
+ char *trigger;
+
+ switch (desc->status & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_NONE:
+ trigger = "(default)";
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ trigger = "edge-falling";
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ trigger = "edge-rising";
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ trigger = "edge-both";
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ trigger = "level-high";
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ trigger = "level-low";
+ break;
+ default:
+ trigger = "?trigger?";
+ break;
+ }
+
+ seq_printf(s, " irq-%d %s%s",
+ irq, trigger,
+ (desc->status & IRQ_WAKEUP)
+ ? " wakeup" : "");
+ }
+ }
+
+ seq_printf(s, "\n");
+ }
}
#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 967c079180db..ea78e908fc82 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -52,40 +52,43 @@
#define EP93XX_AHB_VIRT_BASE 0xfef00000
#define EP93XX_AHB_SIZE 0x00100000
+#define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x))
+
#define EP93XX_APB_PHYS_BASE 0x80800000
#define EP93XX_APB_VIRT_BASE 0xfed00000
#define EP93XX_APB_SIZE 0x00200000
+#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x))
+
/* AHB peripherals */
-#define EP93XX_DMA_BASE ((void __iomem *) \
- (EP93XX_AHB_VIRT_BASE + 0x00000000))
+#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000)
-#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000)
#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000)
-#define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000)
#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000)
-#define EP93XX_RASTER_BASE (EP93XX_AHB_VIRT_BASE + 0x00030000)
+#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000)
-#define EP93XX_GRAPHICS_ACCEL_BASE (EP93XX_AHB_VIRT_BASE + 0x00040000)
+#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000)
-#define EP93XX_SDRAM_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00060000)
+#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000)
-#define EP93XX_PCMCIA_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00080000)
+#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000)
-#define EP93XX_BOOT_ROM_BASE (EP93XX_AHB_VIRT_BASE + 0x00090000)
+#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000)
-#define EP93XX_IDE_BASE (EP93XX_AHB_VIRT_BASE + 0x000a0000)
+#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000)
-#define EP93XX_VIC1_BASE (EP93XX_AHB_VIRT_BASE + 0x000b0000)
+#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000)
-#define EP93XX_VIC2_BASE (EP93XX_AHB_VIRT_BASE + 0x000c0000)
+#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000)
/* APB peripherals */
-#define EP93XX_TIMER_BASE (EP93XX_APB_VIRT_BASE + 0x00010000)
+#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000)
#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
@@ -102,11 +105,11 @@
#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
-#define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000)
+#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
-#define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000)
+#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
-#define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000)
+#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c)
#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50)
@@ -124,32 +127,33 @@
#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8)
#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
-#define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000)
+#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
-#define EP93XX_SPI_BASE (EP93XX_APB_VIRT_BASE + 0x000a0000)
+#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000)
-#define EP93XX_IRDA_BASE (EP93XX_APB_VIRT_BASE + 0x000b0000)
+#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000)
-#define EP93XX_UART1_BASE (EP93XX_APB_VIRT_BASE + 0x000c0000)
#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000)
-#define EP93XX_UART2_BASE (EP93XX_APB_VIRT_BASE + 0x000d0000)
#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000)
-#define EP93XX_UART3_BASE (EP93XX_APB_VIRT_BASE + 0x000e0000)
#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000)
-#define EP93XX_KEY_MATRIX_BASE (EP93XX_APB_VIRT_BASE + 0x000f0000)
+#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000)
-#define EP93XX_ADC_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
+#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000)
-#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000)
+#define EP93XX_PWM_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00110000)
+#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000)
-#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000)
#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000)
-#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000)
+#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000)
#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04)
@@ -172,14 +176,45 @@
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN (1<<24)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE (1<<23)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN (1<<20)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN (1<<18)
+#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31)
+#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30)
+#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29)
+#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28)
+#define EP93XX_SYSCON_DEVCFG_GONK (1<<27)
+#define EP93XX_SYSCON_DEVCFG_TONG (1<<26)
+#define EP93XX_SYSCON_DEVCFG_MONG (1<<25)
+#define EP93XX_SYSCON_DEVCFG_U3EN (1<<24)
+#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23)
+#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22)
+#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21)
+#define EP93XX_SYSCON_DEVCFG_U2EN (1<<20)
+#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19)
+#define EP93XX_SYSCON_DEVCFG_U1EN (1<<18)
+#define EP93XX_SYSCON_DEVCFG_TIN (1<<17)
+#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15)
+#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14)
+#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13)
+#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12)
+#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11)
+#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10)
+#define EP93XX_SYSCON_DEVCFG_PONG (1<<9)
+#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8)
+#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7)
+#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6)
+#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4)
+#define EP93XX_SYSCON_DEVCFG_RAS (1<<3)
+#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2)
+#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1)
+#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0)
+#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN (1<<31)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0)
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
-#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)
+#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000)
#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 2866297310b7..349fa7cb72d5 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -4,12 +4,23 @@
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
-#include "ep93xx-regs.h"
+#include <mach/ep93xx-regs.h>
+#include <mach/platform.h>
#define pcibios_assign_all_busses() 0
-#include "platform.h"
+/*
+ * The EP93xx has two external crystal oscillators. To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks. The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE 14745600
+#define EP93XX_EXT_RTC_RATE 32768
-#include "ts72xx.h"
+#define EP93XX_KEYTCHCLK_DIV4 (EP93XX_EXT_CLK_RATE / 4)
+#define EP93XX_KEYTCHCLK_DIV16 (EP93XX_EXT_CLK_RATE / 16)
#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index fd5f081cc8b7..cebcc1c53d63 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,8 +1,21 @@
/*
* arch/arm/mach-ep93xx/include/mach/io.h
*/
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(p) __typesafe_io(p)
-#define __mem_pci(p) (p)
+#define __io(p) __typesafe_io(p)
+#define __mem_pci(p) (p)
+
+/*
+ * A typesafe __io() variation for variable initialisers
+ */
+#ifdef __ASSEMBLER__
+#define IOMEM(p) p
+#else
+#define IOMEM(p) ((void __iomem __force *)(p))
+#endif
+
+#endif /* __ASM_MACH_IO_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 05f0f4f2f3ce..5f5fa6574d34 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -5,6 +5,7 @@
#ifndef __ASSEMBLY__
struct i2c_board_info;
+struct platform_device;
struct ep93xx_eth_data
{
@@ -15,8 +16,27 @@ struct ep93xx_eth_data
void ep93xx_map_io(void);
void ep93xx_init_irq(void);
void ep93xx_init_time(unsigned long);
+
+/* EP93xx System Controller software locked register write */
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
+
+static inline void ep93xx_devcfg_set_bits(unsigned int bits)
+{
+ ep93xx_devcfg_set_clear(bits, 0x00);
+}
+
+static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
+{
+ ep93xx_devcfg_set_clear(0x00, bits);
+}
+
void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_pwm(int pwm0, int pwm1);
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
+void ep93xx_pwm_release_gpio(struct platform_device *pdev);
+
void ep93xx_init_devices(void);
extern struct sys_timer ep93xx_timer;
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
index ed8f35e4f068..6d661fe9d66c 100644
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -11,15 +11,13 @@ static inline void arch_idle(void)
static inline void arch_reset(char mode, const char *cmd)
{
- u32 devicecfg;
-
local_irq_disable();
- devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+ /*
+ * Set then clear the SWRST bit to initiate a software reset
+ */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
while (1)
;
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 34ddec081c40..2737666e800e 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -70,7 +70,6 @@
#ifndef __ASSEMBLY__
-#include <linux/io.h>
static inline int board_is_ts7200(void)
{
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 15d6815d78c4..0a313e82fb74 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -9,21 +9,16 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
#include <linux/kernel.h>
-#include <linux/mm.h>
+#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
-#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
static struct ep93xx_eth_data micro9_eth_data = {
.phy_id = 0x1f,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 7ee024d34829..5255dddd3067 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -12,19 +12,18 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <linux/m48t86.h>
#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/m48t86.h>
+#include <linux/mtd/physmap.h>
+
#include <mach/hardware.h>
+#include <mach/ts72xx.h>
+
#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
static struct map_desc ts72xx_io_desc[] __initdata = {
{
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index d927eddcad46..9e87e08fb121 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -22,7 +22,6 @@
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/gpio.h>
-#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/common.h>
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index e70fc7c66bbb..ed2a48a9ce74 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -36,7 +36,6 @@
#include <mach/hwa742.h>
#include <mach/lcd_mipid.h>
#include <mach/mmc.h>
-#include <mach/usb.h>
#include <mach/clock.h>
#define ADS7846_PENDOWN_GPIO 15
@@ -205,9 +204,11 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
static struct omap_mmc_platform_data nokia770_mmc2_data = {
.nr_slots = 1,
.dma_mask = 0xffffffff,
+ .max_freq = 12000000,
.slots[0] = {
.set_power = nokia770_mmc_set_power,
.get_cover_state = nokia770_mmc_get_cover_state,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.name = "mmcblk",
},
};
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 0af4d6c85b47..6810b4aeb02c 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -203,5 +203,5 @@ module_exit(omap1_mbox_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
MODULE_ALIAS("platform:omap1-mailbox");
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index a2d7814896be..505d98cfe508 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,7 +19,6 @@
#include <mach/irqs.h>
#include <mach/dma.h>
-#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/cpu.h>
#include <mach/mcbsp.h>
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index da93b86234ed..9a0bf6744a05 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -362,6 +362,7 @@ static struct omap_onenand_platform_data board_onenand_data = {
.gpio_irq = 65,
.parts = onenand_partitions,
.nr_parts = ARRAY_SIZE(onenand_partitions),
+ .flags = ONENAND_SYNC_READWRITE,
};
static void __init board_onenand_init(void)
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 2fd22f9c5f0e..54fec53a48e7 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -31,6 +31,8 @@ static struct platform_device gpmc_onenand_device = {
static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
{
struct gpmc_timings t;
+ u32 reg;
+ int err;
const int t_cer = 15;
const int t_avdp = 12;
@@ -43,6 +45,11 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
const int t_wpl = 40;
const int t_wph = 30;
+ /* Ensure sync read and sync write are disabled */
+ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+ reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+ writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
memset(&t, 0, sizeof(t));
t.sync_clk = 0;
t.cs_on = 0;
@@ -74,7 +81,16 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
GPMC_CONFIG1_DEVICESIZE_16 |
GPMC_CONFIG1_MUXADDDATA);
- return gpmc_cs_set_timings(cs, &t);
+ err = gpmc_cs_set_timings(cs, &t);
+ if (err)
+ return err;
+
+ /* Ensure sync read and sync write are disabled */
+ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+ reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+ writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
+ return 0;
}
static void set_onenand_cfg(void __iomem *onenand_base, int latency,
@@ -124,7 +140,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
sync_read = 1;
sync_write = 1;
- }
+ } else
+ return omap2_onenand_set_async_mode(cs, onenand_base);
if (!freq) {
/* Very first call freq is not known */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 458990e20c60..a98201cc265c 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -48,6 +48,28 @@ int omap_chip_is(struct omap_chip_id oci)
}
EXPORT_SYMBOL(omap_chip_is);
+int omap_type(void)
+{
+ u32 val = 0;
+
+ if (cpu_is_omap24xx())
+ val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
+ else if (cpu_is_omap34xx())
+ val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+ else {
+ pr_err("Cannot detect omap type!\n");
+ goto out;
+ }
+
+ val &= OMAP2_DEVICETYPE_MASK;
+ val >>= 8;
+
+out:
+ return val;
+}
+EXPORT_SYMBOL(omap_type);
+
+
/*----------------------------------------------------------------------------*/
#define OMAP_TAP_IDCODE 0x0204
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index fd5b8a5925cc..6f71f3730c97 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -282,12 +282,12 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
return -ENOMEM;
/* DSP or IVA2 IRQ */
- mbox_dsp_info.irq = platform_get_irq(pdev, 0);
- if (mbox_dsp_info.irq < 0) {
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
dev_err(&pdev->dev, "invalid irq resource\n");
- ret = -ENODEV;
goto err_dsp;
}
+ mbox_dsp_info.irq = ret;
ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
if (ret)
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a5c0f0435cd6..99b6e1546311 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -19,7 +19,6 @@
#include <mach/irqs.h>
#include <mach/dma.h>
-#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/cpu.h>
#include <mach/mcbsp.h>
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 9756a878fd90..1541fd4c8d0f 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -263,8 +263,19 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
{
int ret = 0;
- struct twl_mmc_controller *c = &hsmmc[1];
+ struct twl_mmc_controller *c = NULL;
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ int i;
+
+ for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
+ if (mmc == hsmmc[i].mmc) {
+ c = &hsmmc[i];
+ break;
+ }
+ }
+
+ if (c == NULL)
+ return -ENODEV;
/* If we don't see a Vcc regulator, assume it's a fixed
* voltage always-on regulator.
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 6a5bc3021bdb..ec71a6965786 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -48,8 +48,6 @@
#include <plat/mci.h>
#include <plat/udc.h>
-#include <plat/regs-serial.h>
-
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
@@ -275,6 +273,7 @@ static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(mini2440_default_nand_part),
.partitions = mini2440_default_nand_part,
+ .flash_bbt = 1, /* we use u-boot to create a BBT */
},
};
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index e23b581aa0e1..0fb385bd9cd9 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -433,8 +433,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = {
*/
.name = "neo1973-nand",
.nr_chips = 1,
- .use_bbt = 1,
- .force_soft_ecc = 1,
+ .flash_bbt = 1,
},
};
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 5cd04d6751b3..111f7ea32b38 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/io.h>
+#include <linux/seq_file.h>
#include <asm/clkdev.h>
#include <mach/hardware.h>
@@ -702,6 +703,7 @@ static struct clk amba_clk = {
.rate = 52000000, /* this varies! */
.hw_ctrld = true,
.reset = false,
+ .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock),
};
/*
@@ -720,6 +722,7 @@ static struct clk cpu_clk = {
.set_rate = clk_set_rate_cpuclk,
.get_rate = clk_get_rate_cpuclk,
.round_rate = clk_round_rate_cpuclk,
+ .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock),
};
static struct clk nandif_clk = {
@@ -732,6 +735,7 @@ static struct clk nandif_clk = {
.clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock),
};
static struct clk semi_clk = {
@@ -744,6 +748,7 @@ static struct clk semi_clk = {
.clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock),
};
#ifdef CONFIG_MACH_U300_BS335
@@ -758,6 +763,7 @@ static struct clk isp_clk = {
.clk_val = U300_SYSCON_SBCER_ISP_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock),
};
static struct clk cds_clk = {
@@ -771,6 +777,7 @@ static struct clk cds_clk = {
.clk_val = U300_SYSCON_SBCER_CDS_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock),
};
#endif
@@ -785,6 +792,7 @@ static struct clk dma_clk = {
.clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock),
};
static struct clk aaif_clk = {
@@ -798,6 +806,7 @@ static struct clk aaif_clk = {
.clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock),
};
static struct clk apex_clk = {
@@ -811,6 +820,7 @@ static struct clk apex_clk = {
.clk_val = U300_SYSCON_SBCER_APEX_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock),
};
static struct clk video_enc_clk = {
@@ -825,6 +835,7 @@ static struct clk video_enc_clk = {
.clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock),
};
static struct clk xgam_clk = {
@@ -839,6 +850,7 @@ static struct clk xgam_clk = {
.get_rate = clk_get_rate_xgamclk,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock),
};
/* This clock is used to activate the video encoder */
@@ -854,6 +866,7 @@ static struct clk ahb_clk = {
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_ahb_clk,
+ .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock),
};
@@ -871,6 +884,7 @@ static struct clk ahb_subsys_clk = {
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_ahb_clk,
+ .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock),
};
static struct clk intcon_clk = {
@@ -882,6 +896,8 @@ static struct clk intcon_clk = {
.res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
.res_mask = U300_SYSCON_RRR_INTCON_RESET_EN,
/* INTCON can be reset but not clock-gated */
+ .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock),
+
};
static struct clk mspro_clk = {
@@ -895,6 +911,7 @@ static struct clk mspro_clk = {
.clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock),
};
static struct clk emif_clk = {
@@ -909,6 +926,7 @@ static struct clk emif_clk = {
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_emif_clk,
+ .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock),
};
@@ -926,6 +944,7 @@ static struct clk fast_clk = {
.clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
};
static struct clk mmcsd_clk = {
@@ -942,6 +961,7 @@ static struct clk mmcsd_clk = {
.round_rate = clk_round_rate_mclk,
.disable = syscon_clk_disable,
.enable = syscon_clk_enable,
+ .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock),
};
static struct clk i2s0_clk = {
@@ -956,6 +976,7 @@ static struct clk i2s0_clk = {
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_i2s_i2c_spi,
+ .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock),
};
static struct clk i2s1_clk = {
@@ -970,6 +991,7 @@ static struct clk i2s1_clk = {
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_i2s_i2c_spi,
+ .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock),
};
static struct clk i2c0_clk = {
@@ -984,6 +1006,7 @@ static struct clk i2c0_clk = {
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_i2s_i2c_spi,
+ .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock),
};
static struct clk i2c1_clk = {
@@ -998,6 +1021,7 @@ static struct clk i2c1_clk = {
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_i2s_i2c_spi,
+ .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
};
static struct clk spi_clk = {
@@ -1012,6 +1036,7 @@ static struct clk spi_clk = {
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_i2s_i2c_spi,
+ .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock),
};
#ifdef CONFIG_MACH_U300_BS335
@@ -1026,6 +1051,7 @@ static struct clk uart1_clk = {
.clk_val = U300_SYSCON_SBCER_UART1_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
};
#endif
@@ -1044,6 +1070,7 @@ static struct clk slow_clk = {
.clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock),
};
/* TODO: implement SYSCON clock? */
@@ -1055,6 +1082,7 @@ static struct clk wdog_clk = {
.rate = 32768,
.reset = false,
/* This is always on, cannot be enabled/disabled or reset */
+ .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
};
/* This one is hardwired to PLL13 */
@@ -1069,6 +1097,7 @@ static struct clk uart_clk = {
.clk_val = U300_SYSCON_SBCER_UART_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(uart_clk.lock),
};
static struct clk keypad_clk = {
@@ -1082,6 +1111,7 @@ static struct clk keypad_clk = {
.clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock),
};
static struct clk gpio_clk = {
@@ -1095,6 +1125,7 @@ static struct clk gpio_clk = {
.clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock),
};
static struct clk rtc_clk = {
@@ -1106,6 +1137,7 @@ static struct clk rtc_clk = {
.res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
.res_mask = U300_SYSCON_RSR_RTC_RESET_EN,
/* This clock is always on, cannot be enabled/disabled */
+ .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock),
};
static struct clk bustr_clk = {
@@ -1119,6 +1151,7 @@ static struct clk bustr_clk = {
.clk_val = U300_SYSCON_SBCER_BTR_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock),
};
static struct clk evhist_clk = {
@@ -1132,6 +1165,7 @@ static struct clk evhist_clk = {
.clk_val = U300_SYSCON_SBCER_EH_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock),
};
static struct clk timer_clk = {
@@ -1145,6 +1179,7 @@ static struct clk timer_clk = {
.clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
};
static struct clk app_timer_clk = {
@@ -1158,6 +1193,7 @@ static struct clk app_timer_clk = {
.clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock),
};
#ifdef CONFIG_MACH_U300_BS335
@@ -1172,6 +1208,7 @@ static struct clk ppm_clk = {
.clk_val = U300_SYSCON_SBCER_PPM_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock),
};
#endif
@@ -1187,53 +1224,53 @@ static struct clk ppm_clk = {
*/
static struct clk_lookup lookups[] = {
/* Connected directly to the AMBA bus */
- DEF_LOOKUP("amba", &amba_clk),
- DEF_LOOKUP("cpu", &cpu_clk),
- DEF_LOOKUP("nandif", &nandif_clk),
- DEF_LOOKUP("semi", &semi_clk),
+ DEF_LOOKUP("amba", &amba_clk),
+ DEF_LOOKUP("cpu", &cpu_clk),
+ DEF_LOOKUP("fsmc", &nandif_clk),
+ DEF_LOOKUP("semi", &semi_clk),
#ifdef CONFIG_MACH_U300_BS335
- DEF_LOOKUP("isp", &isp_clk),
- DEF_LOOKUP("cds", &cds_clk),
+ DEF_LOOKUP("isp", &isp_clk),
+ DEF_LOOKUP("cds", &cds_clk),
#endif
- DEF_LOOKUP("dma", &dma_clk),
- DEF_LOOKUP("aaif", &aaif_clk),
- DEF_LOOKUP("apex", &apex_clk),
+ DEF_LOOKUP("dma", &dma_clk),
+ DEF_LOOKUP("msl", &aaif_clk),
+ DEF_LOOKUP("apex", &apex_clk),
DEF_LOOKUP("video_enc", &video_enc_clk),
- DEF_LOOKUP("xgam", &xgam_clk),
- DEF_LOOKUP("ahb", &ahb_clk),
+ DEF_LOOKUP("xgam", &xgam_clk),
+ DEF_LOOKUP("ahb", &ahb_clk),
/* AHB bridge clocks */
- DEF_LOOKUP("ahb", &ahb_subsys_clk),
- DEF_LOOKUP("intcon", &intcon_clk),
- DEF_LOOKUP("mspro", &mspro_clk),
- DEF_LOOKUP("pl172", &emif_clk),
+ DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
+ DEF_LOOKUP("intcon", &intcon_clk),
+ DEF_LOOKUP("mspro", &mspro_clk),
+ DEF_LOOKUP("pl172", &emif_clk),
/* FAST bridge clocks */
- DEF_LOOKUP("fast", &fast_clk),
- DEF_LOOKUP("mmci", &mmcsd_clk),
+ DEF_LOOKUP("fast", &fast_clk),
+ DEF_LOOKUP("mmci", &mmcsd_clk),
/*
* The .0 and .1 identifiers on these comes from the platform device
* .id field and are assigned when the platform devices are registered.
*/
- DEF_LOOKUP("i2s.0", &i2s0_clk),
- DEF_LOOKUP("i2s.1", &i2s1_clk),
- DEF_LOOKUP("stddci2c.0", &i2c0_clk),
- DEF_LOOKUP("stddci2c.1", &i2c1_clk),
- DEF_LOOKUP("pl022", &spi_clk),
+ DEF_LOOKUP("i2s.0", &i2s0_clk),
+ DEF_LOOKUP("i2s.1", &i2s1_clk),
+ DEF_LOOKUP("stu300.0", &i2c0_clk),
+ DEF_LOOKUP("stu300.1", &i2c1_clk),
+ DEF_LOOKUP("pl022", &spi_clk),
#ifdef CONFIG_MACH_U300_BS335
- DEF_LOOKUP("uart1", &uart1_clk),
+ DEF_LOOKUP("uart1", &uart1_clk),
#endif
/* SLOW bridge clocks */
- DEF_LOOKUP("slow", &slow_clk),
- DEF_LOOKUP("wdog", &wdog_clk),
- DEF_LOOKUP("uart0", &uart_clk),
- DEF_LOOKUP("apptimer", &app_timer_clk),
- DEF_LOOKUP("keypad", &keypad_clk),
+ DEF_LOOKUP("slow", &slow_clk),
+ DEF_LOOKUP("coh901327_wdog", &wdog_clk),
+ DEF_LOOKUP("uart0", &uart_clk),
+ DEF_LOOKUP("apptimer", &app_timer_clk),
+ DEF_LOOKUP("coh901461-keypad", &keypad_clk),
DEF_LOOKUP("u300-gpio", &gpio_clk),
- DEF_LOOKUP("rtc0", &rtc_clk),
- DEF_LOOKUP("bustr", &bustr_clk),
- DEF_LOOKUP("evhist", &evhist_clk),
- DEF_LOOKUP("timer", &timer_clk),
+ DEF_LOOKUP("rtc-coh901331", &rtc_clk),
+ DEF_LOOKUP("bustr", &bustr_clk),
+ DEF_LOOKUP("evhist", &evhist_clk),
+ DEF_LOOKUP("timer", &timer_clk),
#ifdef CONFIG_MACH_U300_BS335
- DEF_LOOKUP("ppm", &ppm_clk),
+ DEF_LOOKUP("ppm", &ppm_clk),
#endif
};
@@ -1427,16 +1464,20 @@ static const struct file_operations u300_clocks_operations = {
.release = single_release,
};
-static void init_clk_read_procfs(void)
+static int __init init_clk_read_debugfs(void)
{
/* Expose a simple debugfs interface to view all clocks */
(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
- NULL, NULL, &u300_clocks_operations);
-}
-#else
-static inline void init_clk_read_procfs(void)
-{
+ NULL, NULL,
+ &u300_clocks_operations);
+ return 0;
}
+/*
+ * This needs to come in after the core_initcall() for the
+ * overall clocks, because debugfs is not available until
+ * the subsystems come up.
+ */
+module_init(init_clk_read_debugfs);
#endif
static int __init u300_clock_init(void)
@@ -1462,8 +1503,6 @@ static int __init u300_clock_init(void)
clk_register();
- init_clk_read_procfs();
-
/*
* Some of these may be on when we boot the system so make sure they
* are turned OFF.
diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
index 8e4178fe5ec2..69bab32a8bc2 100644
--- a/arch/arm/mach-w90x900/Kconfig
+++ b/arch/arm/mach-w90x900/Kconfig
@@ -5,6 +5,16 @@ config CPU_W90P910
help
Support for W90P910 of Nuvoton W90X900 CPUs.
+config CPU_NUC950
+ bool
+ help
+ Support for NUCP950 of Nuvoton NUC900 CPUs.
+
+config CPU_NUC960
+ bool
+ help
+ Support for NUCP960 of Nuvoton NUC900 CPUs.
+
menu "W90P910 Machines"
config MACH_W90P910EVB
@@ -16,4 +26,24 @@ config MACH_W90P910EVB
endmenu
+menu "NUC950 Machines"
+
+config MACH_W90P950EVB
+ bool "Nuvoton NUC950 Evaluation Board"
+ select CPU_NUC950
+ help
+ Say Y here if you are using the Nuvoton NUC950EVB
+
+endmenu
+
+menu "NUC960 Machines"
+
+config MACH_W90N960EVB
+ bool "Nuvoton NUC960 Evaluation Board"
+ select CPU_NUC960
+ help
+ Say Y here if you are using the Nuvoton NUC960EVB
+
+endmenu
+
endif
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index d50c94f4dbdf..828c0326441e 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -4,12 +4,16 @@
# Object file lists.
-obj-y := irq.o time.o mfp-w90p910.o gpio.o clock.o
-
+obj-y := irq.o time.o mfp.o gpio.o clock.o
+obj-y += clksel.o dev.o cpu.o
# W90X900 CPU support files
-obj-$(CONFIG_CPU_W90P910) += w90p910.o
+obj-$(CONFIG_CPU_W90P910) += nuc910.o
+obj-$(CONFIG_CPU_NUC950) += nuc950.o
+obj-$(CONFIG_CPU_NUC960) += nuc960.o
# machine support
-obj-$(CONFIG_MACH_W90P910EVB) += mach-w90p910evb.o
+obj-$(CONFIG_MACH_W90P910EVB) += mach-nuc910evb.o
+obj-$(CONFIG_MACH_W90P950EVB) += mach-nuc950evb.o
+obj-$(CONFIG_MACH_W90N960EVB) += mach-nuc960evb.o
diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c
new file mode 100644
index 000000000000..3de4a5211c3b
--- /dev/null
+++ b/arch/arm/mach-w90x900/clksel.c
@@ -0,0 +1,91 @@
+/*
+ * linux/arch/arm/mach-w90x900/clksel.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+
+#define PLL0 0x00
+#define PLL1 0x01
+#define OTHER 0x02
+#define EXT 0x03
+#define MSOFFSET 0x0C
+#define ATAOFFSET 0x0a
+#define LCDOFFSET 0x06
+#define AUDOFFSET 0x04
+#define CPUOFFSET 0x00
+
+static DEFINE_MUTEX(clksel_sem);
+
+static void clock_source_select(const char *dev_id, unsigned int clkval)
+{
+ unsigned int clksel, offset;
+
+ clksel = __raw_readl(REG_CLKSEL);
+
+ if (strcmp(dev_id, "nuc900-ms") == 0)
+ offset = MSOFFSET;
+ else if (strcmp(dev_id, "nuc900-atapi") == 0)
+ offset = ATAOFFSET;
+ else if (strcmp(dev_id, "nuc900-lcd") == 0)
+ offset = LCDOFFSET;
+ else if (strcmp(dev_id, "nuc900-audio") == 0)
+ offset = AUDOFFSET;
+ else
+ offset = CPUOFFSET;
+
+ clksel &= ~(0x03 << offset);
+ clksel |= (clkval << offset);
+
+ __raw_writel(clksel, REG_CLKSEL);
+}
+
+void nuc900_clock_source(struct device *dev, unsigned char *src)
+{
+ unsigned int clkval;
+ const char *dev_id;
+
+ BUG_ON(!src);
+ clkval = 0;
+
+ mutex_lock(&clksel_sem);
+
+ if (dev)
+ dev_id = dev_name(dev);
+ else
+ dev_id = "cpufreq";
+
+ if (strcmp(src, "pll0") == 0)
+ clkval = PLL0;
+ else if (strcmp(src, "pll1") == 0)
+ clkval = PLL1;
+ else if (strcmp(src, "ext") == 0)
+ clkval = EXT;
+ else if (strcmp(src, "oth") == 0)
+ clkval = OTHER;
+
+ clock_source_select(dev_id, clkval);
+
+ mutex_unlock(&clksel_sem);
+}
+EXPORT_SYMBOL(nuc900_clock_source);
+
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index f420613cd395..b785994bab0a 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -25,6 +25,8 @@
#include "clock.h"
+#define SUBCLK 0x24
+
static DEFINE_SPINLOCK(clocks_lock);
int clk_enable(struct clk *clk)
@@ -53,7 +55,13 @@ void clk_disable(struct clk *clk)
}
EXPORT_SYMBOL(clk_disable);
-void w90x900_clk_enable(struct clk *clk, int enable)
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return 15000000;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void nuc900_clk_enable(struct clk *clk, int enable)
{
unsigned int clocks = clk->cken;
unsigned long clken;
@@ -68,6 +76,22 @@ void w90x900_clk_enable(struct clk *clk, int enable)
__raw_writel(clken, W90X900_VA_CLKPWR);
}
+void nuc900_subclk_enable(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->cken;
+ unsigned long clken;
+
+ clken = __raw_readl(W90X900_VA_CLKPWR + SUBCLK);
+
+ if (enable)
+ clken |= clocks;
+ else
+ clken &= ~clocks;
+
+ __raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK);
+}
+
+
void clks_register(struct clk_lookup *clks, size_t num)
{
int i;
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index 4f27bda76d56..f5816a06eed6 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -12,7 +12,8 @@
#include <asm/clkdev.h>
-void w90x900_clk_enable(struct clk *clk, int enable);
+void nuc900_clk_enable(struct clk *clk, int enable);
+void nuc900_subclk_enable(struct clk *clk, int enable);
void clks_register(struct clk_lookup *clks, size_t num);
struct clk {
@@ -23,10 +24,17 @@ struct clk {
#define DEFINE_CLK(_name, _ctrlbit) \
struct clk clk_##_name = { \
- .enable = w90x900_clk_enable, \
+ .enable = nuc900_clk_enable, \
.cken = (1 << _ctrlbit), \
}
+#define DEFINE_SUBCLK(_name, _ctrlbit) \
+struct clk clk_##_name = { \
+ .enable = nuc900_subclk_enable, \
+ .cken = (1 << _ctrlbit), \
+ }
+
+
#define DEF_CLKLOOK(_clk, _devname, _conname) \
{ \
.clk = _clk, \
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
new file mode 100644
index 000000000000..921cef991bf0
--- /dev/null
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -0,0 +1,212 @@
+/*
+ * linux/arch/arm/mach-w90x900/cpu.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC900 series cpu common support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_8250.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* Initial IO mappings */
+
+static struct map_desc nuc900_iodesc[] __initdata = {
+ IODESC_ENT(IRQ),
+ IODESC_ENT(GCR),
+ IODESC_ENT(UART),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(EBI),
+};
+
+/* Initial clock declarations. */
+static DEFINE_CLK(lcd, 0);
+static DEFINE_CLK(audio, 1);
+static DEFINE_CLK(fmi, 4);
+static DEFINE_SUBCLK(ms, 0);
+static DEFINE_SUBCLK(sd, 1);
+static DEFINE_CLK(dmac, 5);
+static DEFINE_CLK(atapi, 6);
+static DEFINE_CLK(emc, 7);
+static DEFINE_SUBCLK(rmii, 2);
+static DEFINE_CLK(usbd, 8);
+static DEFINE_CLK(usbh, 9);
+static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(pwm, 18);
+static DEFINE_CLK(ps2, 24);
+static DEFINE_CLK(kpi, 25);
+static DEFINE_CLK(wdt, 26);
+static DEFINE_CLK(gdma, 27);
+static DEFINE_CLK(adc, 28);
+static DEFINE_CLK(usi, 29);
+static DEFINE_CLK(ext, 0);
+
+static struct clk_lookup nuc900_clkregs[] = {
+ DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
+ DEF_CLKLOOK(&clk_audio, "nuc900-audio", NULL),
+ DEF_CLKLOOK(&clk_fmi, "nuc900-fmi", NULL),
+ DEF_CLKLOOK(&clk_ms, "nuc900-fmi", "MS"),
+ DEF_CLKLOOK(&clk_sd, "nuc900-fmi", "SD"),
+ DEF_CLKLOOK(&clk_dmac, "nuc900-dmac", NULL),
+ DEF_CLKLOOK(&clk_atapi, "nuc900-atapi", NULL),
+ DEF_CLKLOOK(&clk_emc, "nuc900-emc", NULL),
+ DEF_CLKLOOK(&clk_rmii, "nuc900-emc", "RMII"),
+ DEF_CLKLOOK(&clk_usbd, "nuc900-usbd", NULL),
+ DEF_CLKLOOK(&clk_usbh, "nuc900-usbh", NULL),
+ DEF_CLKLOOK(&clk_g2d, "nuc900-g2d", NULL),
+ DEF_CLKLOOK(&clk_pwm, "nuc900-pwm", NULL),
+ DEF_CLKLOOK(&clk_ps2, "nuc900-ps2", NULL),
+ DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
+ DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
+ DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
+ DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+ DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
+ DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+};
+
+/* Initial serial platform data */
+
+struct plat_serial8250_port nuc900_uart_data[] = {
+ NUC900_8250PORT(UART0),
+};
+
+struct platform_device nuc900_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = nuc900_uart_data,
+ },
+};
+
+/*Set NUC900 series cpu frequence*/
+static int __init nuc900_set_clkval(unsigned int cpufreq)
+{
+ unsigned int pllclk, ahbclk, apbclk, val;
+
+ pllclk = 0;
+ ahbclk = 0;
+ apbclk = 0;
+
+ switch (cpufreq) {
+ case 66:
+ pllclk = PLL_66MHZ;
+ ahbclk = AHB_CPUCLK_1_1;
+ apbclk = APB_AHB_1_2;
+ break;
+
+ case 100:
+ pllclk = PLL_100MHZ;
+ ahbclk = AHB_CPUCLK_1_1;
+ apbclk = APB_AHB_1_2;
+ break;
+
+ case 120:
+ pllclk = PLL_120MHZ;
+ ahbclk = AHB_CPUCLK_1_2;
+ apbclk = APB_AHB_1_2;
+ break;
+
+ case 166:
+ pllclk = PLL_166MHZ;
+ ahbclk = AHB_CPUCLK_1_2;
+ apbclk = APB_AHB_1_2;
+ break;
+
+ case 200:
+ pllclk = PLL_200MHZ;
+ ahbclk = AHB_CPUCLK_1_2;
+ apbclk = APB_AHB_1_2;
+ break;
+ }
+
+ __raw_writel(pllclk, REG_PLLCON0);
+
+ val = __raw_readl(REG_CLKDIV);
+ val &= ~(0x03 << 24 | 0x03 << 26);
+ val |= (ahbclk << 24 | apbclk << 26);
+ __raw_writel(val, REG_CLKDIV);
+
+ return 0;
+}
+static int __init nuc900_set_cpufreq(char *str)
+{
+ unsigned long cpufreq, val;
+
+ if (!*str)
+ return 0;
+
+ strict_strtoul(str, 0, &cpufreq);
+
+ nuc900_clock_source(NULL, "ext");
+
+ nuc900_set_clkval(cpufreq);
+
+ mdelay(1);
+
+ val = __raw_readl(REG_CKSKEW);
+ val &= ~0xff;
+ val |= DEFAULTSKEW;
+ __raw_writel(val, REG_CKSKEW);
+
+ nuc900_clock_source(NULL, "pll0");
+
+ return 1;
+}
+
+__setup("cpufreq=", nuc900_set_cpufreq);
+
+/*Init NUC900 evb io*/
+
+void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size)
+{
+ unsigned long idcode = 0x0;
+
+ iotable_init(mach_desc, mach_size);
+ iotable_init(nuc900_iodesc, ARRAY_SIZE(nuc900_iodesc));
+
+ idcode = __raw_readl(NUC900PDID);
+ if (idcode == NUC910_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
+ else if (idcode == NUC920_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC920\n", idcode);
+ else if (idcode == NUC950_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC950\n", idcode);
+ else if (idcode == NUC960_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC960\n", idcode);
+}
+
+/*Init NUC900 clock*/
+
+void __init nuc900_init_clocks(void)
+{
+ clks_register(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
+}
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 57b5dbabeb41..4d58ba164e25 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -6,7 +6,7 @@
* Copyright (c) 2008 Nuvoton technology corporation
* All rights reserved.
*
- * Header file for W90X900 CPU support
+ * Header file for NUC900 CPU support
*
* Wan ZongShun <mcuos.com@gmail.com>
*
@@ -24,29 +24,7 @@
.type = MT_DEVICE, \
}
-/*Cpu identifier register*/
-
-#define W90X900PDID W90X900_VA_GCR
-#define W90P910_CPUID 0x02900910
-#define W90P920_CPUID 0x02900920
-#define W90P950_CPUID 0x02900950
-#define W90N960_CPUID 0x02900960
-
-struct w90x900_uartcfg;
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void w90x900_init_irq(void);
-extern void w90p910_init_io(struct map_desc *mach_desc, int size);
-extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
-extern void w90p910_init_clocks(void);
-extern void w90p910_map_io(struct map_desc *mach_desc, int size);
-extern struct platform_device w90p910_serial_device;
-extern struct sys_timer w90x900_timer;
-
-#define W90X900_8250PORT(name) \
+#define NUC900_8250PORT(name) \
{ \
.membase = name##_BA, \
.mapbase = name##_PA, \
@@ -56,3 +34,26 @@ extern struct sys_timer w90x900_timer;
.iotype = UPIO_MEM, \
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
}
+
+/*Cpu identifier register*/
+
+#define NUC900PDID W90X900_VA_GCR
+#define NUC910_CPUID 0x02900910
+#define NUC920_CPUID 0x02900920
+#define NUC950_CPUID 0x02900950
+#define NUC960_CPUID 0x02900960
+
+/* extern file from cpu.c */
+
+extern void nuc900_clock_source(struct device *dev, unsigned char *src);
+extern void nuc900_init_clocks(void);
+extern void nuc900_map_io(struct map_desc *mach_desc, int mach_size);
+extern void nuc900_board_init(struct platform_device **device, int size);
+
+/* for either public between 910 and 920, or between 920 and 950 */
+
+extern struct platform_device nuc900_serial_device;
+extern struct platform_device nuc900_device_fmi;
+extern struct platform_device nuc900_device_kpi;
+extern struct platform_device nuc900_device_rtc;
+extern struct platform_device nuc900_device_ts;
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
new file mode 100644
index 000000000000..2a6f98de48d2
--- /dev/null
+++ b/arch/arm/mach-w90x900/dev.c
@@ -0,0 +1,389 @@
+/*
+ * linux/arch/arm/mach-w90x900/dev.c
+ *
+ * Copyright (C) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+
+#include "cpu.h"
+
+/*NUC900 evb norflash driver data */
+
+#define NUC900_FLASH_BASE 0xA0000000
+#define NUC900_FLASH_SIZE 0x400000
+#define SPIOFFSET 0x200
+#define SPIOREG_SIZE 0x100
+
+static struct mtd_partition nuc900_flash_partitions[] = {
+ {
+ .name = "NOR Partition 1 for kernel (960K)",
+ .size = 0xF0000,
+ .offset = 0x10000,
+ },
+ {
+ .name = "NOR Partition 2 for image (1M)",
+ .size = 0x100000,
+ .offset = 0x100000,
+ },
+ {
+ .name = "NOR Partition 3 for user (2M)",
+ .size = 0x200000,
+ .offset = 0x00200000,
+ }
+};
+
+static struct physmap_flash_data nuc900_flash_data = {
+ .width = 2,
+ .parts = nuc900_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nuc900_flash_partitions),
+};
+
+static struct resource nuc900_flash_resources[] = {
+ {
+ .start = NUC900_FLASH_BASE,
+ .end = NUC900_FLASH_BASE + NUC900_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device nuc900_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nuc900_flash_data,
+ },
+ .resource = nuc900_flash_resources,
+ .num_resources = ARRAY_SIZE(nuc900_flash_resources),
+};
+
+/* USB EHCI Host Controller */
+
+static struct resource nuc900_usb_ehci_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBEHCIHOST,
+ .end = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH,
+ .end = IRQ_USBH,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 nuc900_device_usb_ehci_dmamask = 0xffffffffUL;
+
+static struct platform_device nuc900_device_usb_ehci = {
+ .name = "nuc900-ehci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_usb_ehci_resource),
+ .resource = nuc900_usb_ehci_resource,
+ .dev = {
+ .dma_mask = &nuc900_device_usb_ehci_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+/* USB OHCI Host Controller */
+
+static struct resource nuc900_usb_ohci_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBOHCIHOST,
+ .end = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH,
+ .end = IRQ_USBH,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 nuc900_device_usb_ohci_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_usb_ohci = {
+ .name = "nuc900-ohci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_usb_ohci_resource),
+ .resource = nuc900_usb_ohci_resource,
+ .dev = {
+ .dma_mask = &nuc900_device_usb_ohci_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+/* USB Device (Gadget)*/
+
+static struct resource nuc900_usbgadget_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBDEV,
+ .end = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBD,
+ .end = IRQ_USBD,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device nuc900_device_usbgadget = {
+ .name = "nuc900-usbgadget",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_usbgadget_resource),
+ .resource = nuc900_usbgadget_resource,
+};
+
+/* MAC device */
+
+static struct resource nuc900_emc_resource[] = {
+ [0] = {
+ .start = W90X900_PA_EMC,
+ .end = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EMCTX,
+ .end = IRQ_EMCTX,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_EMCRX,
+ .end = IRQ_EMCRX,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 nuc900_device_emc_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_emc = {
+ .name = "nuc900-emc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_emc_resource),
+ .resource = nuc900_emc_resource,
+ .dev = {
+ .dma_mask = &nuc900_device_emc_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+/* SPI device */
+
+static struct resource nuc900_spi_resource[] = {
+ [0] = {
+ .start = W90X900_PA_I2C + SPIOFFSET,
+ .end = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP,
+ .end = IRQ_SSP,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device nuc900_device_spi = {
+ .name = "nuc900-spi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_spi_resource),
+ .resource = nuc900_spi_resource,
+};
+
+/* spi device, spi flash info */
+
+static struct mtd_partition nuc900_spi_flash_partitions[] = {
+ {
+ .name = "bootloader(spi)",
+ .size = 0x0100000,
+ .offset = 0,
+ },
+};
+
+static struct flash_platform_data nuc900_spi_flash_data = {
+ .name = "m25p80",
+ .parts = nuc900_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nuc900_spi_flash_partitions),
+ .type = "w25x16",
+};
+
+static struct spi_board_info nuc900_spi_board_info[] __initdata = {
+ {
+ .modalias = "m25p80",
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .platform_data = &nuc900_spi_flash_data,
+ .mode = SPI_MODE_0,
+ },
+};
+
+/* WDT Device */
+
+static struct resource nuc900_wdt_resource[] = {
+ [0] = {
+ .start = W90X900_PA_TIMER,
+ .end = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_WDT,
+ .end = IRQ_WDT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device nuc900_device_wdt = {
+ .name = "nuc900-wdt",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_wdt_resource),
+ .resource = nuc900_wdt_resource,
+};
+
+/*
+ * public device definition between 910 and 920, or 910
+ * and 950 or 950 and 960...,their dev platform register
+ * should be in specific file such as nuc950, nuc960 c
+ * files rather than the public dev.c file here. so the
+ * corresponding platform_device definition should not be
+ * static.
+*/
+
+/* RTC controller*/
+
+static struct resource nuc900_rtc_resource[] = {
+ [0] = {
+ .start = W90X900_PA_RTC,
+ .end = W90X900_PA_RTC + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC,
+ .end = IRQ_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device nuc900_device_rtc = {
+ .name = "nuc900-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_rtc_resource),
+ .resource = nuc900_rtc_resource,
+};
+
+/*TouchScreen controller*/
+
+static struct resource nuc900_ts_resource[] = {
+ [0] = {
+ .start = W90X900_PA_ADC,
+ .end = W90X900_PA_ADC + W90X900_SZ_ADC-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_ADC,
+ .end = IRQ_ADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device nuc900_device_ts = {
+ .name = "nuc900-ts",
+ .id = -1,
+ .resource = nuc900_ts_resource,
+ .num_resources = ARRAY_SIZE(nuc900_ts_resource),
+};
+
+/* FMI Device */
+
+static struct resource nuc900_fmi_resource[] = {
+ [0] = {
+ .start = W90X900_PA_FMI,
+ .end = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FMI,
+ .end = IRQ_FMI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device nuc900_device_fmi = {
+ .name = "nuc900-fmi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_fmi_resource),
+ .resource = nuc900_fmi_resource,
+};
+
+/* KPI controller*/
+
+static struct resource nuc900_kpi_resource[] = {
+ [0] = {
+ .start = W90X900_PA_KPI,
+ .end = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KPI,
+ .end = IRQ_KPI,
+ .flags = IORESOURCE_IRQ,
+ }
+
+};
+
+struct platform_device nuc900_device_kpi = {
+ .name = "nuc900-kpi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_kpi_resource),
+ .resource = nuc900_kpi_resource,
+};
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *nuc900_public_dev[] __initdata = {
+ &nuc900_serial_device,
+ &nuc900_flash_device,
+ &nuc900_device_usb_ehci,
+ &nuc900_device_usb_ohci,
+ &nuc900_device_usbgadget,
+ &nuc900_device_emc,
+ &nuc900_device_spi,
+ &nuc900_device_wdt,
+};
+
+/* Provide adding specific CPU platform devices API */
+
+void __init nuc900_board_init(struct platform_device **device, int size)
+{
+ platform_add_devices(device, size);
+ platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
+ spi_register_board_info(nuc900_spi_board_info,
+ ARRAY_SIZE(nuc900_spi_board_info));
+}
+
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
index c72e0dfa1825..ba05aec7ea4b 100644
--- a/arch/arm/mach-w90x900/gpio.c
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -1,7 +1,7 @@
/*
- * linux/arch/arm/mach-w90p910/gpio.c
+ * linux/arch/arm/mach-w90x900/gpio.c
*
- * Generic w90p910 GPIO handling
+ * Generic nuc900 GPIO handling
*
* Wan ZongShun <mcuos.com@gmail.com>
*
@@ -30,31 +30,31 @@
#define GPIO_IN (0x0C)
#define GROUPINERV (0x10)
#define GPIO_GPIO(Nb) (0x00000001 << (Nb))
-#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip)
+#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip)
-#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio) \
+#define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio) \
{ \
.chip = { \
.label = name, \
- .direction_input = w90p910_dir_input, \
- .direction_output = w90p910_dir_output, \
- .get = w90p910_gpio_get, \
- .set = w90p910_gpio_set, \
+ .direction_input = nuc900_dir_input, \
+ .direction_output = nuc900_dir_output, \
+ .get = nuc900_gpio_get, \
+ .set = nuc900_gpio_set, \
.base = base_gpio, \
.ngpio = nr_gpio, \
} \
}
-struct w90p910_gpio_chip {
+struct nuc900_gpio_chip {
struct gpio_chip chip;
void __iomem *regbase; /* Base of group register*/
spinlock_t gpio_lock;
};
-static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *pio = w90p910_gpio->regbase + GPIO_IN;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_IN;
unsigned int regval;
regval = __raw_readl(pio);
@@ -63,14 +63,14 @@ static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
return (regval != 0);
}
-static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT;
unsigned int regval;
unsigned long flags;
- spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+ spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
regval = __raw_readl(pio);
@@ -81,36 +81,36 @@ static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
__raw_writel(regval, pio);
- spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+ spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
}
-static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset)
+static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
unsigned int regval;
unsigned long flags;
- spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+ spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
regval = __raw_readl(pio);
regval &= ~GPIO_GPIO(offset);
__raw_writel(regval, pio);
- spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+ spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
return 0;
}
-static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
+static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT;
- void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT;
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
unsigned int regval;
unsigned long flags;
- spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+ spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
regval = __raw_readl(pio);
regval |= GPIO_GPIO(offset);
@@ -125,28 +125,28 @@ static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
__raw_writel(regval, outreg);
- spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+ spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
return 0;
}
-static struct w90p910_gpio_chip w90p910_gpio[] = {
- W90P910_GPIO_CHIP("GROUPC", 0, 16),
- W90P910_GPIO_CHIP("GROUPD", 16, 10),
- W90P910_GPIO_CHIP("GROUPE", 26, 14),
- W90P910_GPIO_CHIP("GROUPF", 40, 10),
- W90P910_GPIO_CHIP("GROUPG", 50, 17),
- W90P910_GPIO_CHIP("GROUPH", 67, 8),
- W90P910_GPIO_CHIP("GROUPI", 75, 17),
+static struct nuc900_gpio_chip nuc900_gpio[] = {
+ NUC900_GPIO_CHIP("GROUPC", 0, 16),
+ NUC900_GPIO_CHIP("GROUPD", 16, 10),
+ NUC900_GPIO_CHIP("GROUPE", 26, 14),
+ NUC900_GPIO_CHIP("GROUPF", 40, 10),
+ NUC900_GPIO_CHIP("GROUPG", 50, 17),
+ NUC900_GPIO_CHIP("GROUPH", 67, 8),
+ NUC900_GPIO_CHIP("GROUPI", 75, 17),
};
-void __init w90p910_init_gpio(int nr_group)
+void __init nuc900_init_gpio(int nr_group)
{
unsigned i;
- struct w90p910_gpio_chip *gpio_chip;
+ struct nuc900_gpio_chip *gpio_chip;
for (i = 0; i < nr_group; i++) {
- gpio_chip = &w90p910_gpio[i];
+ gpio_chip = &nuc900_gpio[i];
spin_lock_init(&gpio_chip->gpio_lock);
gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
gpiochip_add(&gpio_chip->chip);
diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h
index f10b6a8dc069..516d6b477b61 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-clock.h
+++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h
@@ -28,4 +28,26 @@
#define REG_CLKEN1 (CLK_BA + 0x24)
#define REG_CLKDIV1 (CLK_BA + 0x28)
+/* Define PLL freq setting */
+#define PLL_DISABLE 0x12B63
+#define PLL_66MHZ 0x2B63
+#define PLL_100MHZ 0x4F64
+#define PLL_120MHZ 0x4F63
+#define PLL_166MHZ 0x4124
+#define PLL_200MHZ 0x4F24
+
+/* Define AHB:CPUFREQ ratio */
+#define AHB_CPUCLK_1_1 0x00
+#define AHB_CPUCLK_1_2 0x01
+#define AHB_CPUCLK_1_4 0x02
+#define AHB_CPUCLK_1_8 0x03
+
+/* Define APB:AHB ratio */
+#define APB_AHB_1_2 0x01
+#define APB_AHB_1_4 0x02
+#define APB_AHB_1_8 0x03
+
+/* Define clock skew */
+#define DEFAULTSKEW 0x48
+
#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-ebi.h b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
new file mode 100644
index 000000000000..b68455e7f88b
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-ebi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_EBI_H
+#define __ASM_ARCH_REGS_EBI_H
+
+/* EBI Control Registers */
+
+#define EBI_BA W90X900_VA_EBI
+#define REG_EBICON (EBI_BA + 0x00)
+#define REG_ROMCON (EBI_BA + 0x04)
+#define REG_SDCONF0 (EBI_BA + 0x08)
+#define REG_SDCONF1 (EBI_BA + 0x0C)
+#define REG_SDTIME0 (EBI_BA + 0x10)
+#define REG_SDTIME1 (EBI_BA + 0x14)
+#define REG_EXT0CON (EBI_BA + 0x18)
+#define REG_EXT1CON (EBI_BA + 0x1C)
+#define REG_EXT2CON (EBI_BA + 0x20)
+#define REG_EXT3CON (EBI_BA + 0x24)
+#define REG_EXT4CON (EBI_BA + 0x28)
+#define REG_CKSKEW (EBI_BA + 0x2C)
+
+#endif /* __ASM_ARCH_REGS_EBI_H */
diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index 0b4fc194729c..0ce9d8e867eb 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -10,8 +10,7 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
*
*/
@@ -29,9 +28,114 @@
#include <mach/hardware.h>
#include <mach/regs-irq.h>
-static void w90x900_irq_mask(unsigned int irq)
+struct group_irq {
+ unsigned long gpen;
+ unsigned int enabled;
+ void (*enable)(struct group_irq *, int enable);
+};
+
+static DEFINE_SPINLOCK(groupirq_lock);
+
+#define DEFINE_GROUP(_name, _ctrlbit, _num) \
+struct group_irq group_##_name = { \
+ .enable = nuc900_group_enable, \
+ .gpen = ((1 << _num) - 1) << _ctrlbit, \
+ }
+
+static void nuc900_group_enable(struct group_irq *gpirq, int enable);
+
+static DEFINE_GROUP(nirq0, 0, 4);
+static DEFINE_GROUP(nirq1, 4, 4);
+static DEFINE_GROUP(usbh, 8, 2);
+static DEFINE_GROUP(ottimer, 16, 3);
+static DEFINE_GROUP(gdma, 20, 2);
+static DEFINE_GROUP(sc, 24, 2);
+static DEFINE_GROUP(i2c, 26, 2);
+static DEFINE_GROUP(ps2, 28, 2);
+
+static int group_irq_enable(struct group_irq *group_irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&groupirq_lock, flags);
+ if (group_irq->enabled++ == 0)
+ (group_irq->enable)(group_irq, 1);
+ spin_unlock_irqrestore(&groupirq_lock, flags);
+
+ return 0;
+}
+
+static void group_irq_disable(struct group_irq *group_irq)
{
+ unsigned long flags;
+
+ WARN_ON(group_irq->enabled == 0);
+
+ spin_lock_irqsave(&groupirq_lock, flags);
+ if (--group_irq->enabled == 0)
+ (group_irq->enable)(group_irq, 0);
+ spin_unlock_irqrestore(&groupirq_lock, flags);
+}
+
+static void nuc900_group_enable(struct group_irq *gpirq, int enable)
+{
+ unsigned int groupen = gpirq->gpen;
+ unsigned long regval;
+
+ regval = __raw_readl(REG_AIC_GEN);
+
+ if (enable)
+ regval |= groupen;
+ else
+ regval &= ~groupen;
+
+ __raw_writel(regval, REG_AIC_GEN);
+}
+
+static void nuc900_irq_mask(unsigned int irq)
+{
+ struct group_irq *group_irq;
+
+ group_irq = NULL;
+
__raw_writel(1 << irq, REG_AIC_MDCR);
+
+ switch (irq) {
+ case IRQ_GROUP0:
+ group_irq = &group_nirq0;
+ break;
+
+ case IRQ_GROUP1:
+ group_irq = &group_nirq1;
+ break;
+
+ case IRQ_USBH:
+ group_irq = &group_usbh;
+ break;
+
+ case IRQ_T_INT_GROUP:
+ group_irq = &group_ottimer;
+ break;
+
+ case IRQ_GDMAGROUP:
+ group_irq = &group_gdma;
+ break;
+
+ case IRQ_SCGROUP:
+ group_irq = &group_sc;
+ break;
+
+ case IRQ_I2CGROUP:
+ group_irq = &group_i2c;
+ break;
+
+ case IRQ_P2SGROUP:
+ group_irq = &group_ps2;
+ break;
+ }
+
+ if (group_irq)
+ group_irq_disable(group_irq);
}
/*
@@ -39,37 +143,71 @@ static void w90x900_irq_mask(unsigned int irq)
* to REG_AIC_EOSCR for ACK
*/
-static void w90x900_irq_ack(unsigned int irq)
+static void nuc900_irq_ack(unsigned int irq)
{
__raw_writel(0x01, REG_AIC_EOSCR);
}
-static void w90x900_irq_unmask(unsigned int irq)
+static void nuc900_irq_unmask(unsigned int irq)
{
- unsigned long mask;
+ struct group_irq *group_irq;
+
+ group_irq = NULL;
- if (irq == IRQ_T_INT_GROUP) {
- mask = __raw_readl(REG_AIC_GEN);
- __raw_writel(TIME_GROUP_IRQ | mask, REG_AIC_GEN);
- __raw_writel(1 << IRQ_T_INT_GROUP, REG_AIC_MECR);
- }
__raw_writel(1 << irq, REG_AIC_MECR);
+
+ switch (irq) {
+ case IRQ_GROUP0:
+ group_irq = &group_nirq0;
+ break;
+
+ case IRQ_GROUP1:
+ group_irq = &group_nirq1;
+ break;
+
+ case IRQ_USBH:
+ group_irq = &group_usbh;
+ break;
+
+ case IRQ_T_INT_GROUP:
+ group_irq = &group_ottimer;
+ break;
+
+ case IRQ_GDMAGROUP:
+ group_irq = &group_gdma;
+ break;
+
+ case IRQ_SCGROUP:
+ group_irq = &group_sc;
+ break;
+
+ case IRQ_I2CGROUP:
+ group_irq = &group_i2c;
+ break;
+
+ case IRQ_P2SGROUP:
+ group_irq = &group_ps2;
+ break;
+ }
+
+ if (group_irq)
+ group_irq_enable(group_irq);
}
-static struct irq_chip w90x900_irq_chip = {
- .ack = w90x900_irq_ack,
- .mask = w90x900_irq_mask,
- .unmask = w90x900_irq_unmask,
+static struct irq_chip nuc900_irq_chip = {
+ .ack = nuc900_irq_ack,
+ .mask = nuc900_irq_mask,
+ .unmask = nuc900_irq_unmask,
};
-void __init w90x900_init_irq(void)
+void __init nuc900_init_irq(void)
{
int irqno;
__raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) {
- set_irq_chip(irqno, &w90x900_irq_chip);
+ set_irq_chip(irqno, &nuc900_irq_chip);
set_irq_handler(irqno, handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
new file mode 100644
index 000000000000..ec05bda946f3
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc910.h"
+
+static void __init nuc910evb_map_io(void)
+{
+ nuc910_map_io();
+ nuc910_init_clocks();
+}
+
+static void __init nuc910evb_init(void)
+{
+ nuc910_board_init();
+}
+
+MACHINE_START(W90P910EVB, "W90P910EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = W90X900_PA_UART,
+ .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = nuc910evb_map_io,
+ .init_irq = nuc900_init_irq,
+ .init_machine = nuc910evb_init,
+ .timer = &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
new file mode 100644
index 000000000000..cef903bcccd1
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc950evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc950.h"
+
+static void __init nuc950evb_map_io(void)
+{
+ nuc950_map_io();
+ nuc950_init_clocks();
+}
+
+static void __init nuc950evb_init(void)
+{
+ nuc950_board_init();
+}
+
+MACHINE_START(W90P950EVB, "W90P950EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = W90X900_PA_UART,
+ .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = nuc950evb_map_io,
+ .init_irq = nuc900_init_irq,
+ .init_machine = nuc950evb_init,
+ .timer = &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
new file mode 100644
index 000000000000..e3a46f19f2bc
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc960evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc960.h"
+
+static void __init nuc960evb_map_io(void)
+{
+ nuc960_map_io();
+ nuc960_init_clocks();
+}
+
+static void __init nuc960evb_init(void)
+{
+ nuc960_board_init();
+}
+
+MACHINE_START(W90N960EVB, "W90N960EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = W90X900_PA_UART,
+ .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = nuc960evb_map_io,
+ .init_irq = nuc900_init_irq,
+ .init_machine = nuc960evb_init,
+ .timer = &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
deleted file mode 100644
index 7a62bd348e80..000000000000
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mach-w90p910evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-serial.h>
-#include <mach/map.h>
-
-#include "cpu.h"
-/*w90p910 evb norflash driver data */
-
-#define W90P910_FLASH_BASE 0xA0000000
-#define W90P910_FLASH_SIZE 0x400000
-
-static struct mtd_partition w90p910_flash_partitions[] = {
- {
- .name = "NOR Partition 1 for kernel (960K)",
- .size = 0xF0000,
- .offset = 0x10000,
- },
- {
- .name = "NOR Partition 2 for image (1M)",
- .size = 0x100000,
- .offset = 0x100000,
- },
- {
- .name = "NOR Partition 3 for user (2M)",
- .size = 0x200000,
- .offset = 0x00200000,
- }
-};
-
-static struct physmap_flash_data w90p910_flash_data = {
- .width = 2,
- .parts = w90p910_flash_partitions,
- .nr_parts = ARRAY_SIZE(w90p910_flash_partitions),
-};
-
-static struct resource w90p910_flash_resources[] = {
- {
- .start = W90P910_FLASH_BASE,
- .end = W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device w90p910_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &w90p910_flash_data,
- },
- .resource = w90p910_flash_resources,
- .num_resources = ARRAY_SIZE(w90p910_flash_resources),
-};
-
-/* USB EHCI Host Controller */
-
-static struct resource w90x900_usb_ehci_resource[] = {
- [0] = {
- .start = W90X900_PA_USBEHCIHOST,
- .end = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBH,
- .end = IRQ_USBH,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL;
-
-struct platform_device w90x900_device_usb_ehci = {
- .name = "w90x900-ehci",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_usb_ehci_resource),
- .resource = w90x900_usb_ehci_resource,
- .dev = {
- .dma_mask = &w90x900_device_usb_ehci_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-EXPORT_SYMBOL(w90x900_device_usb_ehci);
-
-/* USB OHCI Host Controller */
-
-static struct resource w90x900_usb_ohci_resource[] = {
- [0] = {
- .start = W90X900_PA_USBOHCIHOST,
- .end = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBH,
- .end = IRQ_USBH,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL;
-struct platform_device w90x900_device_usb_ohci = {
- .name = "w90x900-ohci",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_usb_ohci_resource),
- .resource = w90x900_usb_ohci_resource,
- .dev = {
- .dma_mask = &w90x900_device_usb_ohci_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-EXPORT_SYMBOL(w90x900_device_usb_ohci);
-
-/*TouchScreen controller*/
-
-static struct resource w90x900_ts_resource[] = {
- [0] = {
- .start = W90X900_PA_ADC,
- .end = W90X900_PA_ADC + W90X900_SZ_ADC-1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_ADC,
- .end = IRQ_ADC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device w90x900_device_ts = {
- .name = "w90x900-ts",
- .id = -1,
- .resource = w90x900_ts_resource,
- .num_resources = ARRAY_SIZE(w90x900_ts_resource),
-};
-EXPORT_SYMBOL(w90x900_device_ts);
-
-/* RTC controller*/
-
-static struct resource w90x900_rtc_resource[] = {
- [0] = {
- .start = W90X900_PA_RTC,
- .end = W90X900_PA_RTC + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_RTC,
- .end = IRQ_RTC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device w90x900_device_rtc = {
- .name = "w90x900-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_rtc_resource),
- .resource = w90x900_rtc_resource,
-};
-EXPORT_SYMBOL(w90x900_device_rtc);
-
-/* KPI controller*/
-
-static struct resource w90x900_kpi_resource[] = {
- [0] = {
- .start = W90X900_PA_KPI,
- .end = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_KPI,
- .end = IRQ_KPI,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device w90x900_device_kpi = {
- .name = "w90x900-kpi",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_kpi_resource),
- .resource = w90x900_kpi_resource,
-};
-EXPORT_SYMBOL(w90x900_device_kpi);
-
-/* USB Device (Gadget)*/
-
-static struct resource w90x900_usbgadget_resource[] = {
- [0] = {
- .start = W90X900_PA_USBDEV,
- .end = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBD,
- .end = IRQ_USBD,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device w90x900_device_usbgadget = {
- .name = "w90x900-usbgadget",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_usbgadget_resource),
- .resource = w90x900_usbgadget_resource,
-};
-EXPORT_SYMBOL(w90x900_device_usbgadget);
-
-static struct map_desc w90p910_iodesc[] __initdata = {
-};
-
-/*Here should be your evb resourse,such as LCD*/
-
-static struct platform_device *w90p910evb_dev[] __initdata = {
- &w90p910_serial_device,
- &w90p910_flash_device,
- &w90x900_device_usb_ehci,
- &w90x900_device_usb_ohci,
- &w90x900_device_ts,
- &w90x900_device_rtc,
- &w90x900_device_kpi,
- &w90x900_device_usbgadget,
-};
-
-static void __init w90p910evb_map_io(void)
-{
- w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
- w90p910_init_clocks();
-}
-
-static void __init w90p910evb_init(void)
-{
- platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
-}
-
-MACHINE_START(W90P910EVB, "W90P910EVB")
- /* Maintainer: Wan ZongShun */
- .phys_io = W90X900_PA_UART,
- .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
- .boot_params = 0,
- .map_io = w90p910evb_map_io,
- .init_irq = w90x900_init_irq,
- .init_machine = w90p910evb_init,
- .timer = &w90x900_timer,
-MACHINE_END
diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
deleted file mode 100644
index a3520fefb5e7..000000000000
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mfp-w90p910.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define REG_MFSEL (W90X900_VA_GCR + 0xC)
-
-#define GPSELF (0x01 << 1)
-
-#define GPSELC (0x03 << 2)
-#define ENKPI (0x02 << 2)
-#define ENNAND (0x01 << 2)
-
-#define GPSELEI0 (0x01 << 26)
-#define GPSELEI1 (0x01 << 27)
-
-static DECLARE_MUTEX(mfp_sem);
-
-void mfp_set_groupf(struct device *dev)
-{
- unsigned long mfpen;
- const char *dev_id;
-
- BUG_ON(!dev);
-
- down(&mfp_sem);
-
- dev_id = dev_name(dev);
-
- mfpen = __raw_readl(REG_MFSEL);
-
- if (strcmp(dev_id, "w90p910-emc") == 0)
- mfpen |= GPSELF;/*enable mac*/
- else
- mfpen &= ~GPSELF;/*GPIOF[9:0]*/
-
- __raw_writel(mfpen, REG_MFSEL);
-
- up(&mfp_sem);
-}
-EXPORT_SYMBOL(mfp_set_groupf);
-
-void mfp_set_groupc(struct device *dev)
-{
- unsigned long mfpen;
- const char *dev_id;
-
- BUG_ON(!dev);
-
- down(&mfp_sem);
-
- dev_id = dev_name(dev);
-
- mfpen = __raw_readl(REG_MFSEL);
-
- if (strcmp(dev_id, "w90p910-lcd") == 0)
- mfpen |= GPSELC;/*enable lcd*/
- else if (strcmp(dev_id, "w90p910-kpi") == 0) {
- mfpen &= (~GPSELC);/*enable kpi*/
- mfpen |= ENKPI;
- } else if (strcmp(dev_id, "w90p910-nand") == 0) {
- mfpen &= (~GPSELC);/*enable nand*/
- mfpen |= ENNAND;
- } else
- mfpen &= (~GPSELC);/*GPIOC[14:0]*/
-
- __raw_writel(mfpen, REG_MFSEL);
-
- up(&mfp_sem);
-}
-EXPORT_SYMBOL(mfp_set_groupc);
-
-void mfp_set_groupi(struct device *dev, int gpio)
-{
- unsigned long mfpen;
- const char *dev_id;
-
- BUG_ON(!dev);
-
- down(&mfp_sem);
-
- dev_id = dev_name(dev);
-
- mfpen = __raw_readl(REG_MFSEL);
-
- if (strcmp(dev_id, "w90p910-wdog") == 0)
- mfpen |= GPSELEI1;/*enable wdog*/
- else if (strcmp(dev_id, "w90p910-atapi") == 0)
- mfpen |= GPSELEI0;/*enable atapi*/
-
- __raw_writel(mfpen, REG_MFSEL);
-
- up(&mfp_sem);
-}
-EXPORT_SYMBOL(mfp_set_groupi);
-
diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c
new file mode 100644
index 000000000000..a47dc9a708ee
--- /dev/null
+++ b/arch/arm/mach-w90x900/mfp.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-w90x900/mfp.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#define REG_MFSEL (W90X900_VA_GCR + 0xC)
+
+#define GPSELF (0x01 << 1)
+
+#define GPSELC (0x03 << 2)
+#define ENKPI (0x02 << 2)
+#define ENNAND (0x01 << 2)
+
+#define GPSELEI0 (0x01 << 26)
+#define GPSELEI1 (0x01 << 27)
+
+#define GPIOG0TO1 (0x03 << 14)
+#define GPIOG2TO3 (0x03 << 16)
+#define ENSPI (0x0a << 14)
+#define ENI2C0 (0x01 << 14)
+#define ENI2C1 (0x01 << 16)
+
+static DEFINE_MUTEX(mfp_mutex);
+
+void mfp_set_groupf(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ mutex_lock(&mfp_mutex);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "nuc900-emc") == 0)
+ mfpen |= GPSELF;/*enable mac*/
+ else
+ mfpen &= ~GPSELF;/*GPIOF[9:0]*/
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupf);
+
+void mfp_set_groupc(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ mutex_lock(&mfp_mutex);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "nuc900-lcd") == 0)
+ mfpen |= GPSELC;/*enable lcd*/
+ else if (strcmp(dev_id, "nuc900-kpi") == 0) {
+ mfpen &= (~GPSELC);/*enable kpi*/
+ mfpen |= ENKPI;
+ } else if (strcmp(dev_id, "nuc900-nand") == 0) {
+ mfpen &= (~GPSELC);/*enable nand*/
+ mfpen |= ENNAND;
+ } else
+ mfpen &= (~GPSELC);/*GPIOC[14:0]*/
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupc);
+
+void mfp_set_groupi(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ mutex_lock(&mfp_mutex);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ mfpen &= ~GPSELEI1;/*default gpio16*/
+
+ if (strcmp(dev_id, "nuc900-wdog") == 0)
+ mfpen |= GPSELEI1;/*enable wdog*/
+ else if (strcmp(dev_id, "nuc900-atapi") == 0)
+ mfpen |= GPSELEI0;/*enable atapi*/
+ else if (strcmp(dev_id, "nuc900-keypad") == 0)
+ mfpen &= ~GPSELEI0;/*enable keypad*/
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupi);
+
+void mfp_set_groupg(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ mutex_lock(&mfp_mutex);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "nuc900-spi") == 0) {
+ mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
+ mfpen |= ENSPI;/*enable spi*/
+ } else if (strcmp(dev_id, "nuc900-i2c0") == 0) {
+ mfpen &= ~(GPIOG0TO1);
+ mfpen |= ENI2C0;/*enable i2c0*/
+ } else if (strcmp(dev_id, "nuc900-i2c1") == 0) {
+ mfpen &= ~(GPIOG2TO3);
+ mfpen |= ENI2C1;/*enable i2c1*/
+ } else {
+ mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
+ }
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupg);
+
diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c
new file mode 100644
index 000000000000..656f03b3b629
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.c
@@ -0,0 +1,60 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc910.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC910 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+#include "clock.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc910_dev[] __initdata = {
+ &nuc900_device_ts,
+ &nuc900_device_rtc,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc910evb_iodesc[] __initdata = {
+ IODESC_ENT(USBEHCIHOST),
+ IODESC_ENT(USBOHCIHOST),
+ IODESC_ENT(KPI),
+ IODESC_ENT(USBDEV),
+ IODESC_ENT(ADC),
+};
+
+/*Init NUC910 evb io*/
+
+void __init nuc910_map_io(void)
+{
+ nuc900_map_io(nuc910evb_iodesc, ARRAY_SIZE(nuc910evb_iodesc));
+}
+
+/*Init NUC910 clock*/
+
+void __init nuc910_init_clocks(void)
+{
+ nuc900_init_clocks();
+}
+
+/*Init NUC910 board info*/
+
+void __init nuc910_board_init(void)
+{
+ nuc900_board_init(nuc910_dev, ARRAY_SIZE(nuc910_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc910.h b/arch/arm/mach-w90x900/nuc910.h
new file mode 100644
index 000000000000..83e9ba5fc26c
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc910.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc910.c */
+
+extern void nuc910_board_init(void);
+extern void nuc910_init_clocks(void);
+extern void nuc910_map_io(void);
diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
new file mode 100644
index 000000000000..149508116d18
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc950.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC950 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc950_dev[] __initdata = {
+ &nuc900_device_kpi,
+ &nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc950evb_iodesc[] __initdata = {
+};
+
+/*Init NUC950 evb io*/
+
+void __init nuc950_map_io(void)
+{
+ nuc900_map_io(nuc950evb_iodesc, ARRAY_SIZE(nuc950evb_iodesc));
+}
+
+/*Init NUC950 clock*/
+
+void __init nuc950_init_clocks(void)
+{
+ nuc900_init_clocks();
+}
+
+/*Init NUC950 board info*/
+
+void __init nuc950_board_init(void)
+{
+ nuc900_board_init(nuc950_dev, ARRAY_SIZE(nuc950_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc950.h b/arch/arm/mach-w90x900/nuc950.h
new file mode 100644
index 000000000000..98a1148bc5ae
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc950.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc950.c */
+
+extern void nuc950_board_init(void);
+extern void nuc950_init_clocks(void);
+extern void nuc950_map_io(void);
diff --git a/arch/arm/mach-w90x900/nuc960.c b/arch/arm/mach-w90x900/nuc960.c
new file mode 100644
index 000000000000..8851a3a27ce2
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc960.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC960 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc960_dev[] __initdata = {
+ &nuc900_device_kpi,
+ &nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc960evb_iodesc[] __initdata = {
+};
+
+/*Init NUC960 evb io*/
+
+void __init nuc960_map_io(void)
+{
+ nuc900_map_io(nuc960evb_iodesc, ARRAY_SIZE(nuc960evb_iodesc));
+}
+
+/*Init NUC960 clock*/
+
+void __init nuc960_init_clocks(void)
+{
+ nuc900_init_clocks();
+}
+
+/*Init NUC960 board info*/
+
+void __init nuc960_board_init(void)
+{
+ nuc900_board_init(nuc960_dev, ARRAY_SIZE(nuc960_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc960.h b/arch/arm/mach-w90x900/nuc960.h
new file mode 100644
index 000000000000..f0c07cbe3a82
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc960.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc960.c */
+
+extern void nuc960_board_init(void);
+extern void nuc960_init_clocks(void);
+extern void nuc960_map_io(void);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index bcc838f6b393..4128af870b41 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -3,7 +3,7 @@
*
* Based on linux/arch/arm/plat-s3c24xx/time.c by Ben Dooks
*
- * Copyright (c) 2008 Nuvoton technology corporation
+ * Copyright (c) 2009 Nuvoton technology corporation
* All rights reserved.
*
* Wan ZongShun <mcuos.com@gmail.com>
@@ -23,6 +23,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/leds.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
#include <asm/mach-types.h>
#include <asm/mach/irq.h>
@@ -31,49 +33,150 @@
#include <mach/map.h>
#include <mach/regs-timer.h>
-static unsigned long w90x900_gettimeoffset(void)
+#define RESETINT 0x1f
+#define PERIOD (0x01 << 27)
+#define ONESHOT (0x00 << 27)
+#define COUNTEN (0x01 << 30)
+#define INTEN (0x01 << 29)
+
+#define TICKS_PER_SEC 100
+#define PRESCALE 0x63 /* Divider = prescale + 1 */
+
+unsigned int timer0_load;
+
+static void nuc900_clockevent_setmode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
{
+ unsigned int val;
+
+ val = __raw_readl(REG_TCSR0);
+ val &= ~(0x03 << 27);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ __raw_writel(timer0_load, REG_TICR0);
+ val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+
+ __raw_writel(val, REG_TCSR0);
+}
+
+static int nuc900_clockevent_setnextevent(unsigned long evt,
+ struct clock_event_device *clk)
+{
+ unsigned int val;
+
+ __raw_writel(evt, REG_TICR0);
+
+ val = __raw_readl(REG_TCSR0);
+ val |= (COUNTEN | INTEN | PRESCALE);
+ __raw_writel(val, REG_TCSR0);
+
return 0;
}
+static struct clock_event_device nuc900_clockevent_device = {
+ .name = "nuc900-timer0",
+ .shift = 32,
+ .features = CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = nuc900_clockevent_setmode,
+ .set_next_event = nuc900_clockevent_setnextevent,
+ .rating = 300,
+};
+
/*IRQ handler for the timer*/
-static irqreturn_t
-w90x900_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t nuc900_timer0_interrupt(int irq, void *dev_id)
{
- timer_tick();
+ struct clock_event_device *evt = &nuc900_clockevent_device;
+
__raw_writel(0x01, REG_TISR); /* clear TIF0 */
+
+ evt->event_handler(evt);
return IRQ_HANDLED;
}
-static struct irqaction w90x900_timer_irq = {
- .name = "w90x900 Timer Tick",
+static struct irqaction nuc900_timer0_irq = {
+ .name = "nuc900-timer0",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = w90x900_timer_interrupt,
+ .handler = nuc900_timer0_interrupt,
};
-/*Set up timer reg.*/
+static void __init nuc900_clockevents_init(unsigned int rate)
+{
+ nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
+ nuc900_clockevent_device.shift);
+ nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
+ &nuc900_clockevent_device);
+ nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
+ &nuc900_clockevent_device);
+ nuc900_clockevent_device.cpumask = cpumask_of(0);
-static void w90x900_timer_setup(void)
+ clockevents_register_device(&nuc900_clockevent_device);
+}
+
+static cycle_t nuc900_get_cycles(struct clocksource *cs)
{
- __raw_writel(0, REG_TCSR0);
- __raw_writel(0, REG_TCSR1);
- __raw_writel(0, REG_TCSR2);
- __raw_writel(0, REG_TCSR3);
- __raw_writel(0, REG_TCSR4);
- __raw_writel(0x1F, REG_TISR);
- __raw_writel(15000000/(100 * 100), REG_TICR0);
- __raw_writel(0x68000063, REG_TCSR0);
+ return ~__raw_readl(REG_TDR1);
}
-static void __init w90x900_timer_init(void)
+static struct clocksource clocksource_nuc900 = {
+ .name = "nuc900-timer1",
+ .rating = 200,
+ .read = nuc900_get_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init nuc900_clocksource_init(unsigned int rate)
{
- w90x900_timer_setup();
- setup_irq(IRQ_TIMER0, &w90x900_timer_irq);
+ unsigned int val;
+
+ __raw_writel(0xffffffff, REG_TICR1);
+
+ val = __raw_readl(REG_TCSR1);
+ val |= (COUNTEN | PERIOD);
+ __raw_writel(val, REG_TCSR1);
+
+ clocksource_nuc900.mult =
+ clocksource_khz2mult((rate / 1000), clocksource_nuc900.shift);
+ clocksource_register(&clocksource_nuc900);
+}
+
+static void __init nuc900_timer_init(void)
+{
+ struct clk *ck_ext = clk_get(NULL, "ext");
+ unsigned int rate;
+
+ BUG_ON(IS_ERR(ck_ext));
+
+ rate = clk_get_rate(ck_ext);
+ clk_put(ck_ext);
+ rate = rate / (PRESCALE + 0x01);
+
+ /* set a known state */
+ __raw_writel(0x00, REG_TCSR0);
+ __raw_writel(0x00, REG_TCSR1);
+ __raw_writel(RESETINT, REG_TISR);
+ timer0_load = (rate / TICKS_PER_SEC);
+
+ setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
+
+ nuc900_clocksource_init(rate);
+ nuc900_clockevents_init(rate);
}
-struct sys_timer w90x900_timer = {
- .init = w90x900_timer_init,
- .offset = w90x900_gettimeoffset,
- .resume = w90x900_timer_setup
+struct sys_timer nuc900_timer = {
+ .init = nuc900_timer_init,
};
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
deleted file mode 100644
index 1c97e4930b7a..000000000000
--- a/arch/arm/mach-w90x900/w90p910.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/w90p910.c
- *
- * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * W90P910 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-serial.h>
-
-#include "cpu.h"
-#include "clock.h"
-
-/* Initial IO mappings */
-
-static struct map_desc w90p910_iodesc[] __initdata = {
- IODESC_ENT(IRQ),
- IODESC_ENT(GCR),
- IODESC_ENT(UART),
- IODESC_ENT(TIMER),
- IODESC_ENT(EBI),
- IODESC_ENT(USBEHCIHOST),
- IODESC_ENT(USBOHCIHOST),
- IODESC_ENT(ADC),
- IODESC_ENT(RTC),
- IODESC_ENT(KPI),
- IODESC_ENT(USBDEV),
- /*IODESC_ENT(LCD),*/
-};
-
-/* Initial clock declarations. */
-static DEFINE_CLK(lcd, 0);
-static DEFINE_CLK(audio, 1);
-static DEFINE_CLK(fmi, 4);
-static DEFINE_CLK(dmac, 5);
-static DEFINE_CLK(atapi, 6);
-static DEFINE_CLK(emc, 7);
-static DEFINE_CLK(usbd, 8);
-static DEFINE_CLK(usbh, 9);
-static DEFINE_CLK(g2d, 10);;
-static DEFINE_CLK(pwm, 18);
-static DEFINE_CLK(ps2, 24);
-static DEFINE_CLK(kpi, 25);
-static DEFINE_CLK(wdt, 26);
-static DEFINE_CLK(gdma, 27);
-static DEFINE_CLK(adc, 28);
-static DEFINE_CLK(usi, 29);
-
-static struct clk_lookup w90p910_clkregs[] = {
- DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
- DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
- DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
- DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
- DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
- DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
- DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
- DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
- DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
- DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL),
- DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL),
- DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL),
- DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
- DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
- DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
- DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL),
-};
-
-/* Initial serial platform data */
-
-struct plat_serial8250_port w90p910_uart_data[] = {
- W90X900_8250PORT(UART0),
-};
-
-struct platform_device w90p910_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = w90p910_uart_data,
- },
-};
-
-/*Init W90P910 evb io*/
-
-void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
-{
- unsigned long idcode = 0x0;
-
- iotable_init(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-
- idcode = __raw_readl(W90X900PDID);
- if (idcode != W90P910_CPUID)
- printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
-}
-
-/*Init W90P910 clock*/
-
-void __init w90p910_init_clocks(void)
-{
- clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs));
-}
-
-static int __init w90p910_init_cpu(void)
-{
- return 0;
-}
-
-static int __init w90x900_arch_init(void)
-{
- return w90p910_init_cpu();
-}
-arch_initcall(w90x900_arch_init);
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 6fdcbb709827..5fa8dea5a371 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -16,6 +16,7 @@
#include <linux/kprobes.h>
#include <linux/uaccess.h>
#include <linux/page-flags.h>
+#include <linux/highmem.h>
#include <asm/system.h>
#include <asm/pgtable.h>
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 54b1f721dec8..a0b3f36f3178 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -80,12 +80,6 @@
#if L_PTE_SHARED != PTE_EXT_SHARED
#error PTE shared bit mismatch
#endif
-#if L_PTE_BUFFERABLE != PTE_BUFFERABLE
-#error PTE bufferable bit mismatch
-#endif
-#if L_PTE_CACHEABLE != PTE_CACHEABLE
-#error PTE cacheable bit mismatch
-#endif
#if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\
L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
#error Invalid Linux PTE bit settings
diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c
index 195e48edd8c2..ac5c80062b70 100644
--- a/arch/arm/mm/proc-syms.c
+++ b/arch/arm/mm/proc-syms.c
@@ -27,6 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all);
EXPORT_SYMBOL(__cpuc_flush_user_all);
EXPORT_SYMBOL(__cpuc_flush_user_range);
EXPORT_SYMBOL(__cpuc_coherent_kern_range);
+EXPORT_SYMBOL(__cpuc_flush_dcache_page);
EXPORT_SYMBOL(dmac_inv_range); /* because of flush_ioremap_region() */
#else
EXPORT_SYMBOL(cpu_cache);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index def14ec265b3..7677a4a1cef2 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2457,6 +2457,19 @@ static int __init omap_init_dma(void)
setup_irq(irq, &omap24xx_dma_irq);
}
+ /* Enable smartidle idlemodes and autoidle */
+ if (cpu_is_omap34xx()) {
+ u32 v = dma_read(OCP_SYSCONFIG);
+ v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
+ DMA_SYSCONFIG_SIDLEMODE_MASK |
+ DMA_SYSCONFIG_AUTOIDLE);
+ v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+ DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+ DMA_SYSCONFIG_AUTOIDLE);
+ dma_write(v , OCP_SYSCONFIG);
+ }
+
+
/* FIXME: Update LCD DMA to work on 24xx */
if (cpu_class_is_omap1()) {
r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7fd89ba8d3b5..26b387c12423 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1585,6 +1585,7 @@ static int __init _omap_gpio_init(void)
__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
+ __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN);
/* Initialize interface clock ungated, module enabled */
__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index fc60c4ebcc28..285eaa3a8275 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -30,6 +30,17 @@
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST 0
+#define OMAP2_DEVICE_TYPE_EMU 1
+#define OMAP2_DEVICE_TYPE_SEC 2
+#define OMAP2_DEVICE_TYPE_GP 3
+#define OMAP2_DEVICE_TYPE_BAD 4
+
+int omap_type(void);
+
struct omap_chip_id {
u8 oc;
u8 type;
@@ -424,17 +435,6 @@ IS_OMAP_TYPE(3430, 0x3430)
int omap_chip_is(struct omap_chip_id oci);
-int omap_type(void);
-
-/*
- * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST 0
-#define OMAP2_DEVICE_TYPE_EMU 1
-#define OMAP2_DEVICE_TYPE_SEC 2
-#define OMAP2_DEVICE_TYPE_GP 3
-#define OMAP2_DEVICE_TYPE_BAD 4
-
void omap2_check_revision(void);
#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 8c1eae88737e..7b939cc01962 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -389,6 +389,21 @@
#define DMA_THREAD_FIFO_25 (0x02 << 14)
#define DMA_THREAD_FIFO_50 (0x03 << 14)
+/* DMA4_OCP_SYSCONFIG bits */
+#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12)
+#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8)
+#define DMA_SYSCONFIG_EMUFREE (1 << 5)
+#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3)
+#define DMA_SYSCONFIG_SOFTRESET (1 << 2)
+#define DMA_SYSCONFIG_AUTOIDLE (1 << 0)
+
+#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12)
+#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3)
+
+#define DMA_IDLEMODE_SMARTIDLE 0x2
+#define DMA_IDLEMODE_NO_IDLE 0x1
+#define DMA_IDLEMODE_FORCE_IDLE 0x0
+
/* Chaining modes*/
#ifndef CONFIG_ARCH_OMAP1
#define OMAP_DMA_STATIC_CHAIN 0x1
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 3b2814720569..73f483d56ca6 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -201,7 +201,7 @@
#define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa))
#ifdef __ASSEMBLER__
-#define IOMEM(x) x
+#define IOMEM(x) (x)
#else
#define IOMEM(x) ((void __force __iomem *)(x))
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4cf449fa2cb5..4a0301399013 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -298,7 +298,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da)
if ((start <= da) && (da < start + bytes)) {
dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
__func__, start, da, bytes);
-
+ iotlb_load_cr(obj, &cr);
iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
}
}
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 65006df3f1b7..4ea73804d21e 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -133,7 +133,12 @@ void __init omap_detect_sram(void)
if (cpu_is_omap34xx()) {
omap_sram_base = OMAP3_SRAM_PUB_VA;
omap_sram_start = OMAP3_SRAM_PUB_PA;
- omap_sram_size = 0x8000; /* 32K */
+ if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+ (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+ omap_sram_size = 0x7000; /* 28K */
+ } else {
+ omap_sram_size = 0x8000; /* 32K */
+ }
} else {
omap_sram_base = OMAP2_SRAM_PUB_VA;
omap_sram_start = OMAP2_SRAM_PUB_PA;
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 74bb7cb5da49..0761766b1833 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -34,7 +34,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
-obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
+obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += dev-audio.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index b5b9c4d46e9a..2e170827e0b0 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -37,6 +37,7 @@ extern struct platform_device s3c_device_i2c1;
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_iis;
extern struct platform_device s3c_device_hwmon;
extern struct platform_device s3c_device_hsmmc0;
extern struct platform_device s3c_device_hsmmc1;
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 636cb12711df..579a165c2827 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_PM) += sleep.o
-obj-$(CONFIG_HAVE_PWM) += pwm.o
+obj-$(CONFIG_S3C24XX_PWM) += pwm.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C24XX_ADC) += adc.o
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 9edf7894eedd..da7a61728c18 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -12,8 +12,7 @@
*/
#include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
#include <mach/spi.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index f34d0fc69ad8..86b9edc67413 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -12,8 +12,7 @@
*/
#include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
#include <mach/spi.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c
index d41200382208..6d6b1a468eda 100644
--- a/arch/arm/plat-stmp3xxx/pinmux.c
+++ b/arch/arm/plat-stmp3xxx/pinmux.c
@@ -22,7 +22,6 @@
#include <linux/sysdev.h>
#include <linux/string.h>
#include <linux/bitops.h>
-#include <linux/sysdev.h>
#include <linux/irq.h>
#include <mach/hardware.h>
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 33026eff2aa4..c8c55b469342 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sat Jun 20 22:28:39 2009
+# Last update: Sat Sep 12 12:00:16 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -1769,7 +1769,7 @@ mx31cicada MACH_MX31CICADA MX31CICADA 1777
mi424wr MACH_MI424WR MI424WR 1778
axs_ultrax MACH_AXS_ULTRAX AXS_ULTRAX 1779
at572d940deb MACH_AT572D940DEB AT572D940DEB 1780
-davinci_da8xx_evm MACH_DAVINCI_DA8XX_EVM DAVINCI_DA8XX_EVM 1781
+davinci_da830_evm MACH_DAVINCI_DA830_EVM DAVINCI_DA830_EVM 1781
ep9302 MACH_EP9302 EP9302 1782
at572d940hfek MACH_AT572D940HFEB AT572D940HFEB 1783
cybook3 MACH_CYBOOK3 CYBOOK3 1784
@@ -1962,7 +1962,7 @@ ethernut5 MACH_ETHERNUT5 ETHERNUT5 1971
arm11 MACH_ARM11 ARM11 1972
cpuat9260 MACH_CPUAT9260 CPUAT9260 1973
cpupxa255 MACH_CPUPXA255 CPUPXA255 1974
-cpuimx27 MACH_CPUIMX27 CPUIMX27 1975
+eukrea_cpuimx27 MACH_CPUIMX27 CPUIMX27 1975
cheflux MACH_CHEFLUX CHEFLUX 1976
eb_cpux9k2 MACH_EB_CPUX9K2 EB_CPUX9K2 1977
opcotec MACH_OPCOTEC OPCOTEC 1978
@@ -2249,14 +2249,14 @@ omap3_phrazer MACH_OMAP3_PHRAZER OMAP3_PHRAZER 2261
darwin MACH_DARWIN DARWIN 2262
oratiscomu MACH_ORATISCOMU ORATISCOMU 2263
rtsbc20 MACH_RTSBC20 RTSBC20 2264
-i780 MACH_I780 I780 2265
+sgh_i780 MACH_I780 I780 2265
gemini324 MACH_GEMINI324 GEMINI324 2266
oratislan MACH_ORATISLAN ORATISLAN 2267
oratisalog MACH_ORATISALOG ORATISALOG 2268
oratismadi MACH_ORATISMADI ORATISMADI 2269
oratisot16 MACH_ORATISOT16 ORATISOT16 2270
oratisdesk MACH_ORATISDESK ORATISDESK 2271
-v2p_ca9 MACH_V2P_CA9 V2P_CA9 2272
+v2_ca9 MACH_V2P_CA9 V2P_CA9 2272
sintexo MACH_SINTEXO SINTEXO 2273
cm3389 MACH_CM3389 CM3389 2274
omap3_cio MACH_OMAP3_CIO OMAP3_CIO 2275
@@ -2280,3 +2280,132 @@ htcrhodium MACH_HTCRHODIUM HTCRHODIUM 2292
htctopaz MACH_HTCTOPAZ HTCTOPAZ 2293
matrix504 MACH_MATRIX504 MATRIX504 2294
mrfsa MACH_MRFSA MRFSA 2295
+sc_p270 MACH_SC_P270 SC_P270 2296
+atlas5_evb MACH_ATLAS5_EVB ATLAS5_EVB 2297
+pelco_lobox MACH_PELCO_LOBOX PELCO_LOBOX 2298
+dilax_pcu200 MACH_DILAX_PCU200 DILAX_PCU200 2299
+leonardo MACH_LEONARDO LEONARDO 2300
+zoran_approach7 MACH_ZORAN_APPROACH7 ZORAN_APPROACH7 2301
+dp6xx MACH_DP6XX DP6XX 2302
+bcm2153_vesper MACH_BCM2153_VESPER BCM2153_VESPER 2303
+mahimahi MACH_MAHIMAHI MAHIMAHI 2304
+clickc MACH_CLICKC CLICKC 2305
+zb_gateway MACH_ZB_GATEWAY ZB_GATEWAY 2306
+tazcard MACH_TAZCARD TAZCARD 2307
+tazdev MACH_TAZDEV TAZDEV 2308
+annax_cb_arm MACH_ANNAX_CB_ARM ANNAX_CB_ARM 2309
+annax_dm3 MACH_ANNAX_DM3 ANNAX_DM3 2310
+cerebric MACH_CEREBRIC CEREBRIC 2311
+orca MACH_ORCA ORCA 2312
+pc9260 MACH_PC9260 PC9260 2313
+ems285a MACH_EMS285A EMS285A 2314
+gec2410 MACH_GEC2410 GEC2410 2315
+gec2440 MACH_GEC2440 GEC2440 2316
+mw903 MACH_ARCH_MW903 ARCH_MW903 2317
+mw2440 MACH_MW2440 MW2440 2318
+ecac2378 MACH_ECAC2378 ECAC2378 2319
+tazkiosk MACH_TAZKIOSK TAZKIOSK 2320
+whiterabbit_mch MACH_WHITERABBIT_MCH WHITERABBIT_MCH 2321
+sbox9263 MACH_SBOX9263 SBOX9263 2322
+oreo MACH_OREO OREO 2323
+smdk6442 MACH_SMDK6442 SMDK6442 2324
+openrd_base MACH_OPENRD_BASE OPENRD_BASE 2325
+incredible MACH_INCREDIBLE INCREDIBLE 2326
+incrediblec MACH_INCREDIBLEC INCREDIBLEC 2327
+heroct MACH_HEROCT HEROCT 2328
+mmnet1000 MACH_MMNET1000 MMNET1000 2329
+devkit8000 MACH_DEVKIT8000 DEVKIT8000 2330
+devkit9000 MACH_DEVKIT9000 DEVKIT9000 2331
+mx31txtr MACH_MX31TXTR MX31TXTR 2332
+u380 MACH_U380 U380 2333
+oamp3_hualu MACH_HUALU_BOARD HUALU_BOARD 2334
+npcmx50 MACH_NPCMX50 NPCMX50 2335
+mx51_lange51 MACH_MX51_LANGE51 MX51_LANGE51 2336
+mx51_lange52 MACH_MX51_LANGE52 MX51_LANGE52 2337
+riom MACH_RIOM RIOM 2338
+comcas MACH_COMCAS COMCAS 2339
+wsi_mx27 MACH_WSI_MX27 WSI_MX27 2340
+cm_t35 MACH_CM_T35 CM_T35 2341
+net2big MACH_NET2BIG NET2BIG 2342
+motorola_a1600 MACH_MOTOROLA_A1600 MOTOROLA_A1600 2343
+igep0020 MACH_IGEP0020 IGEP0020 2344
+igep0010 MACH_IGEP0010 IGEP0010 2345
+mv6281gtwge2 MACH_MV6281GTWGE2 MV6281GTWGE2 2346
+scat100 MACH_SCAT100 SCAT100 2347
+sanmina MACH_SANMINA SANMINA 2348
+momento MACH_MOMENTO MOMENTO 2349
+nuc9xx MACH_NUC9XX NUC9XX 2350
+nuc910evb MACH_NUC910EVB NUC910EVB 2351
+nuc920evb MACH_NUC920EVB NUC920EVB 2352
+nuc950evb MACH_NUC950EVB NUC950EVB 2353
+nuc945evb MACH_NUC945EVB NUC945EVB 2354
+nuc960evb MACH_NUC960EVB NUC960EVB 2355
+nuc932evb MACH_NUC932EVB NUC932EVB 2356
+nuc900 MACH_NUC900 NUC900 2357
+sd1soc MACH_SD1SOC SD1SOC 2358
+ln2440bc MACH_LN2440BC LN2440BC 2359
+rsbc MACH_RSBC RSBC 2360
+openrd_client MACH_OPENRD_CLIENT OPENRD_CLIENT 2361
+hpipaq11x MACH_HPIPAQ11X HPIPAQ11X 2362
+wayland MACH_WAYLAND WAYLAND 2363
+acnbsx102 MACH_ACNBSX102 ACNBSX102 2364
+hwat91 MACH_HWAT91 HWAT91 2365
+at91sam9263cs MACH_AT91SAM9263CS AT91SAM9263CS 2366
+csb732 MACH_CSB732 CSB732 2367
+u8500 MACH_U8500 U8500 2368
+huqiu MACH_HUQIU HUQIU 2369
+mx51_kunlun MACH_MX51_KUNLUN MX51_KUNLUN 2370
+pmt1g MACH_PMT1G PMT1G 2371
+htcelf MACH_HTCELF HTCELF 2372
+armadillo420 MACH_ARMADILLO420 ARMADILLO420 2373
+armadillo440 MACH_ARMADILLO440 ARMADILLO440 2374
+u_chip_dual_arm MACH_U_CHIP_DUAL_ARM U_CHIP_DUAL_ARM 2375
+csr_bdb3 MACH_CSR_BDB3 CSR_BDB3 2376
+dolby_cat1018 MACH_DOLBY_CAT1018 DOLBY_CAT1018 2377
+hy9307 MACH_HY9307 HY9307 2378
+aspire_easystore MACH_A_ES A_ES 2379
+davinci_irif MACH_DAVINCI_IRIF DAVINCI_IRIF 2380
+agama9263 MACH_AGAMA9263 AGAMA9263 2381
+marvell_jasper MACH_MARVELL_JASPER MARVELL_JASPER 2382
+flint MACH_FLINT FLINT 2383
+tavorevb3 MACH_TAVOREVB3 TAVOREVB3 2384
+sch_m490 MACH_SCH_M490 SCH_M490 2386
+rbl01 MACH_RBL01 RBL01 2387
+omnifi MACH_OMNIFI OMNIFI 2388
+otavalo MACH_OTAVALO OTAVALO 2389
+sienna MACH_SIENNA SIENNA 2390
+htc_excalibur_s620 MACH_HTC_EXCALIBUR_S620 HTC_EXCALIBUR_S620 2391
+htc_opal MACH_HTC_OPAL HTC_OPAL 2392
+touchbook MACH_TOUCHBOOK TOUCHBOOK 2393
+latte MACH_LATTE LATTE 2394
+xa200 MACH_XA200 XA200 2395
+nimrod MACH_NIMROD NIMROD 2396
+cc9p9215_3g MACH_CC9P9215_3G CC9P9215_3G 2397
+cc9p9215_3gjs MACH_CC9P9215_3GJS CC9P9215_3GJS 2398
+tk71 MACH_TK71 TK71 2399
+comham3525 MACH_COMHAM3525 COMHAM3525 2400
+mx31erebus MACH_MX31EREBUS MX31EREBUS 2401
+mcardmx27 MACH_MCARDMX27 MCARDMX27 2402
+paradise MACH_PARADISE PARADISE 2403
+tide MACH_TIDE TIDE 2404
+wzl2440 MACH_WZL2440 WZL2440 2405
+sdrdemo MACH_SDRDEMO SDRDEMO 2406
+ethercan2 MACH_ETHERCAN2 ETHERCAN2 2407
+ecmimg20 MACH_ECMIMG20 ECMIMG20 2408
+omap_dragon MACH_OMAP_DRAGON OMAP_DRAGON 2409
+halo MACH_HALO HALO 2410
+huangshan MACH_HUANGSHAN HUANGSHAN 2411
+vl_ma2sc MACH_VL_MA2SC VL_MA2SC 2412
+raumfeld_rc MACH_RAUMFELD_RC RAUMFELD_RC 2413
+raumfeld_connector MACH_RAUMFELD_CONNECTOR RAUMFELD_CONNECTOR 2414
+raumfeld_speaker MACH_RAUMFELD_SPEAKER RAUMFELD_SPEAKER 2415
+multibus_master MACH_MULTIBUS_MASTER MULTIBUS_MASTER 2416
+multibus_pbk MACH_MULTIBUS_PBK MULTIBUS_PBK 2417
+tnetv107x MACH_TNETV107X TNETV107X 2418
+snake MACH_SNAKE SNAKE 2419
+cwmx27 MACH_CWMX27 CWMX27 2420
+sch_m480 MACH_SCH_M480 SCH_M480 2421
+platypus MACH_PLATYPUS PLATYPUS 2422
+pss2 MACH_PSS2 PSS2 2423
+davinci_apm150 MACH_DAVINCI_APM150 DAVINCI_APM150 2424
+str9100 MACH_STR9100 STR9100 2425
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
index 4442f8d2d423..fc42de5ca209 100644
--- a/arch/avr32/include/asm/thread_info.h
+++ b/arch/avr32/include/asm/thread_info.h
@@ -40,7 +40,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall \
} \
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index 6e3d491184ea..b91b2044af9c 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -32,22 +32,25 @@ void NORET_TYPE die(const char *str, struct pt_regs *regs, long err)
spin_lock_irq(&die_lock);
bust_spinlocks(1);
- printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG,
+ printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n",
str, err, ++die_counter);
+
+ printk(KERN_EMERG);
+
#ifdef CONFIG_PREEMPT
- printk("PREEMPT ");
+ printk(KERN_CONT "PREEMPT ");
#endif
#ifdef CONFIG_FRAME_POINTER
- printk("FRAME_POINTER ");
+ printk(KERN_CONT "FRAME_POINTER ");
#endif
if (current_cpu_data.features & AVR32_FEATURE_OCD) {
unsigned long did = ocd_read(DID);
- printk("chip: 0x%03lx:0x%04lx rev %lu\n",
+ printk(KERN_CONT "chip: 0x%03lx:0x%04lx rev %lu\n",
(did >> 1) & 0x7ff,
(did >> 12) & 0x7fff,
(did >> 28) & 0xf);
} else {
- printk("cpu: arch %u r%u / core %u r%u\n",
+ printk(KERN_CONT "cpu: arch %u r%u / core %u r%u\n",
current_cpu_data.arch_type,
current_cpu_data.arch_revision,
current_cpu_data.cpu_type,
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index 2920087516f2..2bbfdd950afc 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -77,7 +77,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 298f023bcc09..6136c33e919f 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -408,13 +408,14 @@ static void __init print_memory_map(char *who)
bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
switch (bfin_memmap.map[i].type) {
case BFIN_MEMMAP_RAM:
- printk("(usable)\n");
- break;
+ printk(KERN_CONT "(usable)\n");
+ break;
case BFIN_MEMMAP_RESERVED:
- printk("(reserved)\n");
- break;
- default: printk("type %lu\n", bfin_memmap.map[i].type);
- break;
+ printk(KERN_CONT "(reserved)\n");
+ break;
+ default:
+ printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type);
+ break;
}
}
}
@@ -614,19 +615,19 @@ static __init void memory_setup(void)
printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
printk(KERN_INFO "Memory map:\n"
- KERN_INFO " fixedcode = 0x%p-0x%p\n"
- KERN_INFO " text = 0x%p-0x%p\n"
- KERN_INFO " rodata = 0x%p-0x%p\n"
- KERN_INFO " bss = 0x%p-0x%p\n"
- KERN_INFO " data = 0x%p-0x%p\n"
- KERN_INFO " stack = 0x%p-0x%p\n"
- KERN_INFO " init = 0x%p-0x%p\n"
- KERN_INFO " available = 0x%p-0x%p\n"
+ " fixedcode = 0x%p-0x%p\n"
+ " text = 0x%p-0x%p\n"
+ " rodata = 0x%p-0x%p\n"
+ " bss = 0x%p-0x%p\n"
+ " data = 0x%p-0x%p\n"
+ " stack = 0x%p-0x%p\n"
+ " init = 0x%p-0x%p\n"
+ " available = 0x%p-0x%p\n"
#ifdef CONFIG_MTD_UCLINUX
- KERN_INFO " rootfs = 0x%p-0x%p\n"
+ " rootfs = 0x%p-0x%p\n"
#endif
#if DMA_UNCACHED_REGION > 0
- KERN_INFO " DMA Zone = 0x%p-0x%p\n"
+ " DMA Zone = 0x%p-0x%p\n"
#endif
, (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
_stext, _etext,
@@ -859,13 +860,13 @@ void __init setup_arch(char **cmdline_p)
#endif
printk(KERN_INFO "Hardware Trace ");
if (bfin_read_TBUFCTL() & 0x1)
- printk("Active ");
+ printk(KERN_CONT "Active ");
else
- printk("Off ");
+ printk(KERN_CONT "Off ");
if (bfin_read_TBUFCTL() & 0x2)
- printk("and Enabled\n");
+ printk(KERN_CONT "and Enabled\n");
else
- printk("and Disabled\n");
+ printk(KERN_CONT "and Disabled\n");
#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
/* we need to initialize the Flashrom device here since we might
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 8eeb457ce5d5..8a1caf2bb5b9 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -212,7 +212,7 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
console_verbose();
oops_in_progress = 1;
#ifdef CONFIG_DEBUG_VERBOSE
- printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
+ printk(KERN_EMERG "Double Fault\n");
#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) {
unsigned int cpu = smp_processor_id();
@@ -583,15 +583,14 @@ asmlinkage void trap_c(struct pt_regs *fp)
#ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
verbose_printk(KERN_NOTICE "No trace since you do not have "
- "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n"
- KERN_NOTICE "\n");
+ "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n");
else
#endif
dump_bfin_trace_buffer();
if (oops_in_progress) {
/* Dump the current kernel stack */
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+ verbose_printk(KERN_NOTICE "Kernel Stack\n");
show_stack(current, NULL);
print_modules();
#ifndef CONFIG_ACCESS_CHECK
@@ -906,7 +905,7 @@ void show_stack(struct task_struct *task, unsigned long *stack)
ret_addr = 0;
if (!j && i % 8 == 0)
- printk("\n" KERN_NOTICE "%p:",addr);
+ printk(KERN_NOTICE "%p:",addr);
/* if it is an odd address, or zero, just skip it */
if (*addr & 0x1 || !*addr)
@@ -996,9 +995,9 @@ void dump_bfin_process(struct pt_regs *fp)
printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu);
if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
- verbose_printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
- KERN_NOTICE " BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
- KERN_NOTICE "\n",
+ verbose_printk(KERN_NOTICE
+ "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
+ " BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n",
(void *)current->mm->start_code,
(void *)current->mm->end_code,
(void *)current->mm->start_data,
@@ -1009,8 +1008,8 @@ void dump_bfin_process(struct pt_regs *fp)
else
verbose_printk(KERN_NOTICE "invalid mm\n");
} else
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE
- "No Valid process in current context\n");
+ verbose_printk(KERN_NOTICE
+ "No Valid process in current context\n");
#endif
}
@@ -1028,7 +1027,7 @@ void dump_bfin_mem(struct pt_regs *fp)
addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
addr++) {
if (!((unsigned long)addr & 0xF))
- verbose_printk("\n" KERN_NOTICE "0x%p: ", addr);
+ verbose_printk(KERN_NOTICE "0x%p: ", addr);
if (!get_instruction(&val, addr)) {
val = 0;
@@ -1056,9 +1055,9 @@ void dump_bfin_mem(struct pt_regs *fp)
oops_in_progress)){
verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
#ifndef CONFIG_DEBUG_HWERR
- verbose_printk(KERN_NOTICE "The remaining message may be meaningless\n"
- KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a"
- " better idea where it came from\n");
+ verbose_printk(KERN_NOTICE
+"The remaining message may be meaningless\n"
+"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
#else
/* If we are handling only one peripheral interrupt
* and current mm and pid are valid, and the last error
@@ -1114,9 +1113,10 @@ void show_regs(struct pt_regs *fp)
verbose_printk(KERN_NOTICE "%s", linux_banner);
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
+ verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n",
+ print_tainted());
verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
- (long)fp->seqstat, fp->ipend, fp->syscfg);
+ (long)fp->seqstat, fp->ipend, fp->syscfg);
if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
verbose_printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n",
(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
@@ -1184,7 +1184,7 @@ unlock:
verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
}
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
+ verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n");
verbose_printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
fp->r0, fp->r1, fp->r2, fp->r3);
verbose_printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
diff --git a/arch/cris/include/asm/thread_info.h b/arch/cris/include/asm/thread_info.h
index bc5b2935ca53..c3aade36c330 100644
--- a/arch/cris/include/asm/thread_info.h
+++ b/arch/cris/include/asm/thread_info.h
@@ -50,8 +50,6 @@ struct thread_info {
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
#define INIT_THREAD_INFO(tsk) \
@@ -60,7 +58,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 8a5bd7a9c6f5..b86e19c9b5b0 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -7,6 +7,7 @@ config FRV
default y
select HAVE_IDE
select HAVE_ARCH_TRACEHOOK
+ select HAVE_PERF_COUNTERS
config ZONE_DMA
bool
diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h
index 0409d981fd39..00a57af79afc 100644
--- a/arch/frv/include/asm/atomic.h
+++ b/arch/frv/include/asm/atomic.h
@@ -121,10 +121,72 @@ static inline void atomic_dec(atomic_t *v)
#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
+/*
+ * 64-bit atomic ops
+ */
+typedef struct {
+ volatile long long counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i) { (i) }
+
+static inline long long atomic64_read(atomic64_t *v)
+{
+ long long counter;
+
+ asm("ldd%I1 %M1,%0"
+ : "=e"(counter)
+ : "m"(v->counter));
+ return counter;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+ asm volatile("std%I0 %1,%M0"
+ : "=m"(v->counter)
+ : "e"(i));
+}
+
+extern long long atomic64_inc_return(atomic64_t *v);
+extern long long atomic64_dec_return(atomic64_t *v);
+extern long long atomic64_add_return(long long i, atomic64_t *v);
+extern long long atomic64_sub_return(long long i, atomic64_t *v);
+
+static inline long long atomic64_add_negative(long long i, atomic64_t *v)
+{
+ return atomic64_add_return(i, v) < 0;
+}
+
+static inline void atomic64_add(long long i, atomic64_t *v)
+{
+ atomic64_add_return(i, v);
+}
+
+static inline void atomic64_sub(long long i, atomic64_t *v)
+{
+ atomic64_sub_return(i, v);
+}
+
+static inline void atomic64_inc(atomic64_t *v)
+{
+ atomic64_inc_return(v);
+}
+
+static inline void atomic64_dec(atomic64_t *v)
+{
+ atomic64_dec_return(v);
+}
+
+#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0)
+#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0)
+#define atomic64_inc_and_test(v) (atomic64_inc_return((v)) == 0)
+
/*****************************************************************************/
/*
* exchange value with memory
*/
+extern uint64_t __xchg_64(uint64_t i, volatile void *v);
+
#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
#define xchg(ptr, x) \
@@ -174,8 +236,10 @@ extern uint32_t __xchg_32(uint32_t i, volatile void *v);
#define tas(ptr) (xchg((ptr), 1))
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&(v)->counter, old, new))
+#define atomic_xchg(v, new) (xchg(&(v)->counter, new))
+#define atomic64_cmpxchg(v, old, new) (__cmpxchg_64(old, new, &(v)->counter))
+#define atomic64_xchg(v, new) (__xchg_64(new, &(v)->counter))
static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
{
diff --git a/arch/frv/include/asm/perf_counter.h b/arch/frv/include/asm/perf_counter.h
new file mode 100644
index 000000000000..ccf726e61b2e
--- /dev/null
+++ b/arch/frv/include/asm/perf_counter.h
@@ -0,0 +1,17 @@
+/* FRV performance counter support
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PERF_COUNTER_H
+#define _ASM_PERF_COUNTER_H
+
+#define PERF_COUNTER_INDEX_OFFSET 0
+
+#endif /* _ASM_PERF_COUNTER_H */
diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h
index 7742ec000cc4..efd22d9077ac 100644
--- a/arch/frv/include/asm/system.h
+++ b/arch/frv/include/asm/system.h
@@ -208,6 +208,8 @@ extern void free_initmem(void);
* - if (*ptr == test) then orig = *ptr; *ptr = test;
* - if (*ptr != test) then orig = *ptr;
*/
+extern uint64_t __cmpxchg_64(uint64_t test, uint64_t new, volatile uint64_t *v);
+
#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
#define cmpxchg(ptr, test, new) \
diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h
index e8a5ed7be021..e608e056bb53 100644
--- a/arch/frv/include/asm/thread_info.h
+++ b/arch/frv/include/asm/thread_info.h
@@ -56,8 +56,6 @@ struct thread_info {
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
@@ -67,7 +65,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index 96d78d5d2c41..4a8fb427ce0a 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -341,10 +341,12 @@
#define __NR_inotify_init1 332
#define __NR_preadv 333
#define __NR_pwritev 334
+#define __NR_rt_tgsigqueueinfo 335
+#define __NR_perf_counter_open 336
#ifdef __KERNEL__
-#define NR_syscalls 335
+#define NR_syscalls 337
#define __ARCH_WANT_IPC_PARSE_VERSION
/* #define __ARCH_WANT_OLD_READDIR */
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index 356e0e327a89..fde1e446b440 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1524,5 +1524,7 @@ sys_call_table:
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev
+ .long sys_rt_tgsigqueueinfo /* 335 */
+ .long sys_perf_counter_open
syscall_table_size = (. - sys_call_table)
diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c
index 0316b3c50eff..a89803b58b9a 100644
--- a/arch/frv/kernel/frv_ksyms.c
+++ b/arch/frv/kernel/frv_ksyms.c
@@ -67,6 +67,10 @@ EXPORT_SYMBOL(atomic_sub_return);
EXPORT_SYMBOL(__xchg_32);
EXPORT_SYMBOL(__cmpxchg_32);
#endif
+EXPORT_SYMBOL(atomic64_add_return);
+EXPORT_SYMBOL(atomic64_sub_return);
+EXPORT_SYMBOL(__xchg_64);
+EXPORT_SYMBOL(__cmpxchg_64);
EXPORT_SYMBOL(__debug_bug_printk);
EXPORT_SYMBOL(__delay_loops_MHz);
diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile
index 08be305c9f44..0a377210c89b 100644
--- a/arch/frv/lib/Makefile
+++ b/arch/frv/lib/Makefile
@@ -4,5 +4,5 @@
lib-y := \
__ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \
- checksum.o memcpy.o memset.o atomic-ops.o \
- outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o
+ checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \
+ outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o perf_counter.o
diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S
index ee0ac905fb08..5e9e6ab5dd0e 100644
--- a/arch/frv/lib/atomic-ops.S
+++ b/arch/frv/lib/atomic-ops.S
@@ -163,11 +163,10 @@ __cmpxchg_32:
ld.p @(gr11,gr0),gr8
orcr cc7,cc7,cc3
subcc gr8,gr9,gr7,icc0
- bne icc0,#0,1f
+ bnelr icc0,#0
cst.p gr10,@(gr11,gr0) ,cc3,#1
corcc gr29,gr29,gr0 ,cc3,#1
beq icc3,#0,0b
-1:
bralr
.size __cmpxchg_32, .-__cmpxchg_32
diff --git a/arch/frv/lib/atomic64-ops.S b/arch/frv/lib/atomic64-ops.S
new file mode 100644
index 000000000000..b6194eeac127
--- /dev/null
+++ b/arch/frv/lib/atomic64-ops.S
@@ -0,0 +1,162 @@
+/* kernel atomic64 operations
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ * Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/spr-regs.h>
+
+ .text
+ .balign 4
+
+
+###############################################################################
+#
+# long long atomic64_inc_return(atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_inc_return
+ .type atomic64_inc_return,@function
+atomic64_inc_return:
+ or.p gr8,gr8,gr10
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ addicc gr9,#1,gr9,icc0
+ addxi gr8,#0,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_inc_return, .-atomic64_inc_return
+
+###############################################################################
+#
+# long long atomic64_dec_return(atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_dec_return
+ .type atomic64_dec_return,@function
+atomic64_dec_return:
+ or.p gr8,gr8,gr10
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ subicc gr9,#1,gr9,icc0
+ subxi gr8,#0,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_dec_return, .-atomic64_dec_return
+
+###############################################################################
+#
+# long long atomic64_add_return(long long i, atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_add_return
+ .type atomic64_add_return,@function
+atomic64_add_return:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ addcc gr9,gr5,gr9,icc0
+ addx gr8,gr4,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_add_return, .-atomic64_add_return
+
+###############################################################################
+#
+# long long atomic64_sub_return(long long i, atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_sub_return
+ .type atomic64_sub_return,@function
+atomic64_sub_return:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ subcc gr9,gr5,gr9,icc0
+ subx gr8,gr4,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_sub_return, .-atomic64_sub_return
+
+###############################################################################
+#
+# uint64_t __xchg_64(uint64_t i, uint64_t *v)
+#
+###############################################################################
+ .globl __xchg_64
+ .type __xchg_64,@function
+__xchg_64:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ cstd.p gr4,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size __xchg_64, .-__xchg_64
+
+###############################################################################
+#
+# uint64_t __cmpxchg_64(uint64_t test, uint64_t new, uint64_t *v)
+#
+###############################################################################
+ .globl __cmpxchg_64
+ .type __cmpxchg_64,@function
+__cmpxchg_64:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr12,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3
+ subcc gr8,gr4,gr0,icc0
+ subcc.p gr9,gr5,gr0,icc1
+ bnelr icc0,#0
+ bnelr icc1,#0
+ cstd.p gr10,@(gr12,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size __cmpxchg_64, .-__cmpxchg_64
+
diff --git a/arch/frv/lib/perf_counter.c b/arch/frv/lib/perf_counter.c
new file mode 100644
index 000000000000..2000feecd571
--- /dev/null
+++ b/arch/frv/lib/perf_counter.c
@@ -0,0 +1,19 @@
+/* Performance counter handling
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/perf_counter.h>
+
+/*
+ * mark the performance counter as pending
+ */
+void set_perf_counter_pending(void)
+{
+}
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
index 700014d2155f..8bbc8b0ee45d 100644
--- a/arch/h8300/include/asm/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
@@ -36,7 +36,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
index ae6922626bf4..8ce2e388e37c 100644
--- a/arch/ia64/include/asm/thread_info.h
+++ b/arch/ia64/include/asm/thread_info.h
@@ -48,7 +48,7 @@ struct thread_info {
.flags = 0, \
.cpu = 0, \
.addr_limit = KERNEL_DS, \
- .preempt_count = 0, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c
index ebf4e988e78c..d5764a3d74af 100644
--- a/arch/ia64/kernel/esi.c
+++ b/arch/ia64/kernel/esi.c
@@ -65,7 +65,7 @@ static int __init esi_init (void)
}
if (!esi)
- return -ENODEV;;
+ return -ENODEV;
systab = __va(esi);
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index abce2468a40b..f1782705b1f7 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -5603,7 +5603,7 @@ pfm_interrupt_handler(int irq, void *arg)
* /proc/perfmon interface, for debug only
*/
-#define PFM_PROC_SHOW_HEADER ((void *)nr_cpu_ids+1)
+#define PFM_PROC_SHOW_HEADER ((void *)(long)nr_cpu_ids+1)
static void *
pfm_proc_start(struct seq_file *m, loff_t *pos)
diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c
index 7053c55b7649..e6676fca4828 100644
--- a/arch/ia64/kernel/salinfo.c
+++ b/arch/ia64/kernel/salinfo.c
@@ -192,7 +192,7 @@ struct salinfo_platform_oemdata_parms {
static void
salinfo_work_to_do(struct salinfo_data *data)
{
- down_trylock(&data->mutex);
+ (void)(down_trylock(&data->mutex) ?: 0);
up(&data->mutex);
}
diff --git a/arch/ia64/kvm/kvm_lib.c b/arch/ia64/kvm/kvm_lib.c
index a85cb611ecd7..f1268b8e6f9e 100644
--- a/arch/ia64/kvm/kvm_lib.c
+++ b/arch/ia64/kvm/kvm_lib.c
@@ -11,5 +11,11 @@
*
*/
#undef CONFIG_MODULES
+#include <linux/module.h>
+#undef CONFIG_KALLSYMS
+#undef EXPORT_SYMBOL
+#undef EXPORT_SYMBOL_GPL
+#define EXPORT_SYMBOL(sym)
+#define EXPORT_SYMBOL_GPL(sym)
#include "../../../lib/vsprintf.c"
#include "../../../lib/ctype.c"
diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index a8f84da04b49..bb862fb224f2 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -130,7 +130,7 @@ static void collect_interruption(struct kvm_vcpu *vcpu)
if (vdcr & IA64_DCR_PP) {
vpsr |= IA64_PSR_PP;
} else {
- vpsr &= ~IA64_PSR_PP;;
+ vpsr &= ~IA64_PSR_PP;
}
vcpu_set_psr(vcpu, vpsr);
@@ -594,11 +594,11 @@ static void set_pal_call_data(struct kvm_vcpu *vcpu)
p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
break;
case PAL_BRAND_INFO:
- p->u.pal_data.gr29 = gr29;;
+ p->u.pal_data.gr29 = gr29;
p->u.pal_data.gr30 = kvm_trans_pal_call_args(vcpu, gr30);
break;
default:
- p->u.pal_data.gr29 = gr29;;
+ p->u.pal_data.gr29 = gr29;
p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
}
p->u.pal_data.gr28 = gr28;
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index a2c6c15e4761..46b02cbcc874 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -406,7 +406,7 @@ void getreg(unsigned long regnum, unsigned long *val,
* Now look at registers in [0-31] range and init correct UNAT
*/
addr = (unsigned long)regs;
- unat = &regs->eml_unat;;
+ unat = &regs->eml_unat;
addr += gr_info[regnum];
diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c
index 4290a429bf7c..20b3852f7a6e 100644
--- a/arch/ia64/kvm/vtlb.c
+++ b/arch/ia64/kvm/vtlb.c
@@ -135,7 +135,7 @@ struct thash_data *__vtr_lookup(struct kvm_vcpu *vcpu, u64 va, int type)
u64 rid;
rid = vcpu_get_rr(vcpu, va);
- rid = rid & RR_RID_MASK;;
+ rid = rid & RR_RID_MASK;
if (type == D_TLB) {
if (vcpu_quick_region_check(vcpu->arch.dtr_regions, va)) {
for (trp = (struct thash_data *)&vcpu->arch.dtrs, i = 0;
@@ -518,7 +518,7 @@ struct thash_data *vtlb_lookup(struct kvm_vcpu *v, u64 va, int is_data)
struct thash_cb *hcb = &v->arch.vtlb;
- cch = __vtr_lookup(v, va, is_data);;
+ cch = __vtr_lookup(v, va, is_data);
if (cch)
return cch;
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 729298f4b234..7de76dd352fe 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -537,7 +537,7 @@ pcibios_align_resource (void *data, struct resource *res,
/*
* PCI BIOS setup, always defaults to SAL interface
*/
-char * __devinit
+char * __init
pcibios_setup (char *str)
{
return str;
diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c
index 76645cf6ac5d..25831c47c579 100644
--- a/arch/ia64/sn/kernel/io_common.c
+++ b/arch/ia64/sn/kernel/io_common.c
@@ -435,7 +435,8 @@ void sn_generate_path(struct pci_bus *pci_bus, char *address)
bricktype = MODULE_GET_BTYPE(moduleid);
if ((bricktype == L1_BRICKTYPE_191010) ||
(bricktype == L1_BRICKTYPE_1932))
- sprintf(address, "%s^%d", address, geo_slot(geoid));
+ sprintf(address + strlen(address), "^%d",
+ geo_slot(geoid));
}
void __devinit
diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 8589d462df27..07bb5bd00e2a 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -57,8 +57,6 @@ struct thread_info {
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
@@ -68,7 +66,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h
index af0fda46e94b..6ea5c33b3c56 100644
--- a/arch/m68k/include/asm/thread_info_mm.h
+++ b/arch/m68k/include/asm/thread_info_mm.h
@@ -19,6 +19,7 @@ struct thread_info {
{ \
.task = &tsk, \
.exec_domain = &default_exec_domain, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h
index 82529f424ea3..c2bde5e24b0b 100644
--- a/arch/m68k/include/asm/thread_info_no.h
+++ b/arch/m68k/include/asm/thread_info_no.h
@@ -49,6 +49,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 1e96c6eb6312..8f8f4abab2ff 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -290,7 +290,7 @@ void dump(struct pt_regs *fp)
unsigned char *tp;
int i;
- printk(KERN_EMERG "\n" KERN_EMERG "CURRENT PROCESS:\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\nCURRENT PROCESS:\n\n");
printk(KERN_EMERG "COMM=%s PID=%d\n", current->comm, current->pid);
if (current->mm) {
@@ -301,8 +301,7 @@ void dump(struct pt_regs *fp)
(int) current->mm->end_data,
(int) current->mm->end_data,
(int) current->mm->brk);
- printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n"
- KERN_EMERG "\n",
+ printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n\n",
(int) current->mm->start_stack,
(int)(((unsigned long) current) + THREAD_SIZE));
}
@@ -313,35 +312,35 @@ void dump(struct pt_regs *fp)
fp->d0, fp->d1, fp->d2, fp->d3);
printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n",
fp->d4, fp->d5, fp->a0, fp->a1);
- printk(KERN_EMERG "\n" KERN_EMERG "USP: %08x TRAPFRAME: %08x\n",
+ printk(KERN_EMERG "\nUSP: %08x TRAPFRAME: %08x\n",
(unsigned int) rdusp(), (unsigned int) fp);
- printk(KERN_EMERG "\n" KERN_EMERG "CODE:");
+ printk(KERN_EMERG "\nCODE:");
tp = ((unsigned char *) fp->pc) - 0x20;
for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) {
if ((i % 0x10) == 0)
- printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+ printk(KERN_EMERG "%08x: ", (int) (tp + i));
printk("%08x ", (int) *sp++);
}
- printk("\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\n");
printk(KERN_EMERG "KERNEL STACK:");
tp = ((unsigned char *) fp) - 0x40;
for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
if ((i % 0x10) == 0)
- printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+ printk(KERN_EMERG "%08x: ", (int) (tp + i));
printk("%08x ", (int) *sp++);
}
- printk("\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\n");
printk(KERN_EMERG "USER STACK:");
tp = (unsigned char *) (rdusp() - 0x10);
for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) {
if ((i % 0x10) == 0)
- printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+ printk(KERN_EMERG "%08x: ", (int) (tp + i));
printk("%08x ", (int) *sp++);
}
- printk("\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\n");
}
/*
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index 51d325343ab5..3739c8f657d7 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -111,7 +111,7 @@ static void print_this_address(unsigned long addr, int i)
if (i % 5)
printk(KERN_CONT " [%08lx] ", addr);
else
- printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr);
+ printk(KERN_EMERG " [%08lx] ", addr);
i++;
#endif
}
@@ -137,8 +137,8 @@ static void __show_stack(struct task_struct *task, unsigned long *stack)
if (stack + 1 + i > endstack)
break;
if (i % 8 == 0)
- printk("\n" KERN_EMERG " ");
- printk(" %08lx", *(stack + i));
+ printk(KERN_EMERG " ");
+ printk(KERN_CONT " %08lx", *(stack + i));
}
printk("\n");
i = 0;
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index b50b845fdd50..2db722d80d4d 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -53,6 +53,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
config GENERIC_GPIO
def_bool y
+config GENERIC_CSUM
+ def_bool y
+
config PCI
def_bool n
diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h
index 0de612ad7cb2..6d2e1d418be7 100644
--- a/arch/microblaze/include/asm/atomic.h
+++ b/arch/microblaze/include/asm/atomic.h
@@ -1,95 +1,7 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
#ifndef _ASM_MICROBLAZE_ATOMIC_H
#define _ASM_MICROBLAZE_ATOMIC_H
-#include <linux/types.h>
-#include <linux/compiler.h> /* likely */
-#include <asm/system.h> /* local_irq_XXX and friends */
-
-#define ATOMIC_INIT(i) { (i) }
-#define atomic_read(v) ((v)->counter)
-#define atomic_set(v, i) (((v)->counter) = (i))
-
-#define atomic_inc(v) (atomic_add_return(1, (v)))
-#define atomic_dec(v) (atomic_sub_return(1, (v)))
-
-#define atomic_add(i, v) (atomic_add_return(i, (v)))
-#define atomic_sub(i, v) (atomic_sub_return(i, (v)))
-
-#define atomic_inc_return(v) (atomic_add_return(1, (v)))
-#define atomic_dec_return(v) (atomic_sub_return(1, (v)))
-
-#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
-#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
-
-#define atomic_inc_not_zero(v) (atomic_add_unless((v), 1, 0))
-
-#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
- int ret;
- unsigned long flags;
-
- local_irq_save(flags);
- ret = v->counter;
- if (likely(ret == old))
- v->counter = new;
- local_irq_restore(flags);
-
- return ret;
-}
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
- int c, old;
-
- c = atomic_read(v);
- while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
- c = old;
- return c != u;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- *addr &= ~mask;
- local_irq_restore(flags);
-}
-
-/**
- * atomic_add_return - add and return
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v and returns @i + @v
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
- unsigned long flags;
- int val;
-
- local_irq_save(flags);
- val = v->counter;
- v->counter = val += i;
- local_irq_restore(flags);
-
- return val;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
- return atomic_add_return(-i, v);
-}
+#include <asm-generic/atomic.h>
/*
* Atomically test *v and decrement if it is greater than 0.
@@ -109,15 +21,4 @@ static inline int atomic_dec_if_positive(atomic_t *v)
return res;
}
-#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-#include <asm-generic/atomic-long.h>
-
#endif /* _ASM_MICROBLAZE_ATOMIC_H */
diff --git a/arch/microblaze/include/asm/bitops.h b/arch/microblaze/include/asm/bitops.h
index d6df1fd4e1e8..a72468f15c8b 100644
--- a/arch/microblaze/include/asm/bitops.h
+++ b/arch/microblaze/include/asm/bitops.h
@@ -1,27 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BITOPS_H
-#define _ASM_MICROBLAZE_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#include <asm/byteorder.h> /* swab32 */
-#include <asm/system.h> /* save_flags */
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit() barrier()
-#define smp_mb__after_clear_bit() barrier()
#include <asm-generic/bitops.h>
-#include <asm-generic/bitops/__fls.h>
-
-#endif /* _ASM_MICROBLAZE_BITOPS_H */
diff --git a/arch/microblaze/include/asm/bug.h b/arch/microblaze/include/asm/bug.h
index 8eb2cdde11d7..b12fd89e42e9 100644
--- a/arch/microblaze/include/asm/bug.h
+++ b/arch/microblaze/include/asm/bug.h
@@ -1,15 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BUG_H
-#define _ASM_MICROBLAZE_BUG_H
-
-#include <linux/kernel.h>
#include <asm-generic/bug.h>
-
-#endif /* _ASM_MICROBLAZE_BUG_H */
diff --git a/arch/microblaze/include/asm/bugs.h b/arch/microblaze/include/asm/bugs.h
index f2c6593653fb..61791e1ad9f5 100644
--- a/arch/microblaze/include/asm/bugs.h
+++ b/arch/microblaze/include/asm/bugs.h
@@ -1,17 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BUGS_H
-#define _ASM_MICROBLAZE_BUGS_H
-
-static inline void check_bugs(void)
-{
- /* nothing to do */
-}
-
-#endif /* _ASM_MICROBLAZE_BUGS_H */
+#include <asm-generic/bugs.h>
diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h
index 97ea46b5cf80..128bf03b54b7 100644
--- a/arch/microblaze/include/asm/checksum.h
+++ b/arch/microblaze/include/asm/checksum.h
@@ -10,12 +10,11 @@
#ifndef _ASM_MICROBLAZE_CHECKSUM_H
#define _ASM_MICROBLAZE_CHECKSUM_H
-#include <linux/in6.h>
-
/*
* computes the checksum of the TCP/UDP pseudo-header
* returns a 16-bit checksum, already complemented
*/
+#define csum_tcpudp_nofold csum_tcpudp_nofold
static inline __wsum
csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
@@ -30,71 +29,6 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
return sum;
}
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy(const void *src, void *dst, int len,
- __wsum sum);
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum sum, int *csum_err);
-
-#define csum_partial_copy_nocheck(src, dst, len, sum) \
- csum_partial_copy((src), (dst), (len), (sum))
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- *
- */
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- * Fold a partial checksum
- */
-static inline __sum16 csum_fold(__wsum csum)
-{
- u32 sum = (__force u32)csum;
- sum = (sum & 0xffff) + (sum >> 16);
- sum = (sum & 0xffff) + (sum >> 16);
- return (__force __sum16)~sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-extern __sum16 ip_compute_csum(const void *buff, int len);
+#include <asm-generic/checksum.h>
#endif /* _ASM_MICROBLAZE_CHECKSUM_H */
diff --git a/arch/microblaze/include/asm/fb.h b/arch/microblaze/include/asm/fb.h
new file mode 100644
index 000000000000..3a4988e8df45
--- /dev/null
+++ b/arch/microblaze/include/asm/fb.h
@@ -0,0 +1 @@
+#include <asm-generic/fb.h>
diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h
index 0f2d6b013e11..41e1e1aa36ac 100644
--- a/arch/microblaze/include/asm/hardirq.h
+++ b/arch/microblaze/include/asm/hardirq.h
@@ -9,21 +9,11 @@
#ifndef _ASM_MICROBLAZE_HARDIRQ_H
#define _ASM_MICROBLAZE_HARDIRQ_H
-#include <linux/cache.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/current.h>
-#include <linux/ptrace.h>
-
/* should be defined in each interrupt controller driver */
extern unsigned int get_irq(struct pt_regs *regs);
-typedef struct {
- unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
+#define ack_bad_irq ack_bad_irq
void ack_bad_irq(unsigned int irq);
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+#include <asm-generic/hardirq.h>
#endif /* _ASM_MICROBLAZE_HARDIRQ_H */
diff --git a/arch/microblaze/include/asm/ioctls.h b/arch/microblaze/include/asm/ioctls.h
index 03582b249204..ec34c760665e 100644
--- a/arch/microblaze/include/asm/ioctls.h
+++ b/arch/microblaze/include/asm/ioctls.h
@@ -1,91 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_IOCTLS_H
-#define _ASM_MICROBLAZE_IOCTLS_H
-
-#include <linux/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-/* Get Pty Number (of pty-mux device) */
-#define TIOCGPTN _IOR('T', 0x30, unsigned int)
-#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-
-#define FIOQSIZE 0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-
-#endif /* _ASM_MICROBLAZE_IOCTLS_H */
+#include <asm-generic/ioctls.h>
diff --git a/arch/microblaze/include/asm/ipcbuf.h b/arch/microblaze/include/asm/ipcbuf.h
index b056fa420654..84c7e51cb6d0 100644
--- a/arch/microblaze/include/asm/ipcbuf.h
+++ b/arch/microblaze/include/asm/ipcbuf.h
@@ -1,36 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_IPCBUF_H
-#define _ASM_MICROBLAZE_IPCBUF_H
-
-/*
- * The user_ipc_perm structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm {
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* _ASM_MICROBLAZE_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index db515deaa720..90f050535ebe 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -10,6 +10,7 @@
#define _ASM_MICROBLAZE_IRQ_H
#define NR_IRQS 32
+#include <asm-generic/irq.h>
#include <linux/interrupt.h>
@@ -17,11 +18,6 @@ extern unsigned int nr_irq;
#define NO_IRQ (-1)
-static inline int irq_canonicalize(int irq)
-{
- return irq;
-}
-
struct pt_regs;
extern void do_IRQ(struct pt_regs *regs);
diff --git a/arch/microblaze/include/asm/mman.h b/arch/microblaze/include/asm/mman.h
index 4914b1329445..8eebf89f5ab1 100644
--- a/arch/microblaze/include/asm/mman.h
+++ b/arch/microblaze/include/asm/mman.h
@@ -1,25 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMAN_H
-#define _ASM_MICROBLAZE_MMAN_H
-
#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
-#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MAP_LOCKED 0x2000 /* pages are locked */
-#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-
-#define MCL_CURRENT 1 /* lock all current mappings */
-#define MCL_FUTURE 2 /* lock all future mappings */
-
-#endif /* _ASM_MICROBLAZE_MMAN_H */
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
index 66cad6a99d77..8d6a654ceffb 100644
--- a/arch/microblaze/include/asm/mmu.h
+++ b/arch/microblaze/include/asm/mmu.h
@@ -12,12 +12,7 @@
#define _ASM_MICROBLAZE_MMU_H
# ifndef CONFIG_MMU
-# ifndef __ASSEMBLY__
-typedef struct {
- struct vm_list_struct *vmlist;
- unsigned long end_brk;
-} mm_context_t;
-# endif /* __ASSEMBLY__ */
+# include <asm-generic/mmu.h>
# else /* CONFIG_MMU */
# ifdef __KERNEL__
# ifndef __ASSEMBLY__
diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h
index 385fed16bbfb..24eab1674d3e 100644
--- a/arch/microblaze/include/asm/mmu_context.h
+++ b/arch/microblaze/include/asm/mmu_context.h
@@ -1,5 +1,5 @@
#ifdef CONFIG_MMU
# include "mmu_context_mm.h"
#else
-# include "mmu_context_no.h"
+# include <asm-generic/mmu_context.h>
#endif
diff --git a/arch/microblaze/include/asm/mmu_context_no.h b/arch/microblaze/include/asm/mmu_context_no.h
deleted file mode 100644
index ba5567190154..000000000000
--- a/arch/microblaze/include/asm/mmu_context_no.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2008-2009 PetaLogix
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
-#define _ASM_MICROBLAZE_MMU_CONTEXT_H
-
-# define init_new_context(tsk, mm) ({ 0; })
-
-# define enter_lazy_tlb(mm, tsk) do {} while (0)
-# define change_mm_context(old, ctx, _pml4) do {} while (0)
-# define destroy_context(mm) do {} while (0)
-# define deactivate_mm(tsk, mm) do {} while (0)
-# define switch_mm(prev, next, tsk) do {} while (0)
-# define activate_mm(prev, next) do {} while (0)
-
-#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
diff --git a/arch/microblaze/include/asm/module.h b/arch/microblaze/include/asm/module.h
index 914565a90315..7be1347fce42 100644
--- a/arch/microblaze/include/asm/module.h
+++ b/arch/microblaze/include/asm/module.h
@@ -9,6 +9,8 @@
#ifndef _ASM_MICROBLAZE_MODULE_H
#define _ASM_MICROBLAZE_MODULE_H
+#include <asm-generic/module.h>
+
/* Microblaze Relocations */
#define R_MICROBLAZE_NONE 0
#define R_MICROBLAZE_32 1
@@ -24,14 +26,6 @@
/* Keep this the last entry. */
#define R_MICROBLAZE_NUM 11
-struct mod_arch_specific {
- int foo;
-};
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
typedef struct { volatile int counter; } module_t;
#endif /* _ASM_MICROBLAZE_MODULE_H */
diff --git a/arch/microblaze/include/asm/msgbuf.h b/arch/microblaze/include/asm/msgbuf.h
index 09dd97097211..809134c644a6 100644
--- a/arch/microblaze/include/asm/msgbuf.h
+++ b/arch/microblaze/include/asm/msgbuf.h
@@ -1,31 +1 @@
-#ifndef _ASM_MICROBLAZE_MSGBUF_H
-#define _ASM_MICROBLAZE_MSGBUF_H
-
-/*
- * The msqid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
- struct ipc64_perm msg_perm;
- __kernel_time_t msg_stime; /* last msgsnd time */
- unsigned long __unused1;
- __kernel_time_t msg_rtime; /* last msgrcv time */
- unsigned long __unused2;
- __kernel_time_t msg_ctime; /* last change time */
- unsigned long __unused3;
- unsigned long msg_cbytes; /* current number of bytes on queue */
- unsigned long msg_qnum; /* number of messages in queue */
- unsigned long msg_qbytes; /* max number of bytes on queue */
- __kernel_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_pid_t msg_lrpid; /* last receive pid */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-#endif /* _ASM_MICROBLAZE_MSGBUF_H */
+#include <asm-generic/msgbuf.h>
diff --git a/arch/microblaze/include/asm/param.h b/arch/microblaze/include/asm/param.h
index 8c538a49616d..965d45427975 100644
--- a/arch/microblaze/include/asm/param.h
+++ b/arch/microblaze/include/asm/param.h
@@ -1,30 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_PARAM_H
-#define _ASM_MICROBLAZE_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ CONFIG_HZ /* internal kernel timer frequency */
-#define USER_HZ 100 /* for user interfaces in "ticks" */
-#define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */
-#endif /* __KERNEL__ */
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif /* _ASM_MICROBLAZE_PARAM_H */
+#include <asm-generic/param.h>
diff --git a/arch/microblaze/include/asm/parport.h b/arch/microblaze/include/asm/parport.h
new file mode 100644
index 000000000000..cf252af64590
--- /dev/null
+++ b/arch/microblaze/include/asm/parport.h
@@ -0,0 +1 @@
+#include <asm-generic/parport.h>
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index ca03794cf3f0..9f0df5faf2c8 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -1 +1 @@
-#include <linux/io.h>
+#include <asm-generic/pci.h>
diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h
index 8c758b231f37..0e15039673e3 100644
--- a/arch/microblaze/include/asm/posix_types.h
+++ b/arch/microblaze/include/asm/posix_types.h
@@ -1,73 +1,9 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
#ifndef _ASM_MICROBLAZE_POSIX_TYPES_H
#define _ASM_MICROBLAZE_POSIX_TYPES_H
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long __kernel_ino_t;
typedef unsigned short __kernel_mode_t;
-typedef unsigned int __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned int __kernel_ipc_pid_t;
-typedef unsigned int __kernel_uid_t;
-typedef unsigned int __kernel_gid_t;
-typedef unsigned long __kernel_size_t;
-typedef long __kernel_ssize_t;
-typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_timer_t;
-typedef int __kernel_clockid_t;
-typedef int __kernel_daddr_t;
-typedef char *__kernel_caddr_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
-
-typedef unsigned int __kernel_old_uid_t;
-typedef unsigned int __kernel_old_gid_t;
-typedef unsigned int __kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
- int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef __FD_SET
-#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-
-#undef __FD_CLR
-#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-
-#undef __FD_ISSET
-#define __FD_ISSET(d, set) (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d)))
-
-#undef __FD_ZERO
-#define __FD_ZERO(fdsetp) (memset(fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+#define __kernel_mode_t __kernel_mode_t
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#include <asm-generic/posix_types.h>
#endif /* _ASM_MICROBLAZE_POSIX_TYPES_H */
diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h
index 08ff1d049b42..35d786fe93ae 100644
--- a/arch/microblaze/include/asm/scatterlist.h
+++ b/arch/microblaze/include/asm/scatterlist.h
@@ -1,28 +1 @@
-/*
- * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SCATTERLIST_H
-#define _ASM_MICROBLAZE_SCATTERLIST_H
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- dma_addr_t dma_address;
- unsigned int offset;
- unsigned int length;
-};
-
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
-
-#define ISA_DMA_THRESHOLD (~0UL)
-
-#endif /* _ASM_MICROBLAZE_SCATTERLIST_H */
+#include <asm-generic/scatterlist.h>
diff --git a/arch/microblaze/include/asm/sembuf.h b/arch/microblaze/include/asm/sembuf.h
index b804ed71a57e..7673b83cfef7 100644
--- a/arch/microblaze/include/asm/sembuf.h
+++ b/arch/microblaze/include/asm/sembuf.h
@@ -1,34 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SEMBUF_H
-#define _ASM_MICROBLAZE_SEMBUF_H
-
-/*
- * The semid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
- struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
- __kernel_time_t sem_otime; /* last semop time */
- unsigned long __unused1;
- __kernel_time_t sem_ctime; /* last change time */
- unsigned long __unused2;
- unsigned long sem_nsems; /* no. of semaphores in array */
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-
-#endif /* _ASM_MICROBLAZE_SEMBUF_H */
+#include <asm-generic/sembuf.h>
diff --git a/arch/microblaze/include/asm/serial.h b/arch/microblaze/include/asm/serial.h
index 39bfc8ce6af5..a0cb0caff152 100644
--- a/arch/microblaze/include/asm/serial.h
+++ b/arch/microblaze/include/asm/serial.h
@@ -1,14 +1 @@
-/*
- * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SERIAL_H
-#define _ASM_MICROBLAZE_SERIAL_H
-
-# define BASE_BAUD (1843200 / 16)
-
-#endif /* _ASM_MICROBLAZE_SERIAL_H */
+#include <asm-generic/serial.h>
diff --git a/arch/microblaze/include/asm/shmbuf.h b/arch/microblaze/include/asm/shmbuf.h
index f829c5843618..83c05fc2de38 100644
--- a/arch/microblaze/include/asm/shmbuf.h
+++ b/arch/microblaze/include/asm/shmbuf.h
@@ -1,42 +1 @@
-#ifndef _ASM_MICROBLAZE_SHMBUF_H
-#define _ASM_MICROBLAZE_SHMBUF_H
-
-/*
- * The shmid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- unsigned long __unused1;
- __kernel_time_t shm_dtime; /* last detach time */
- unsigned long __unused2;
- __kernel_time_t shm_ctime; /* last change time */
- unsigned long __unused3;
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned long shm_nattch; /* no. of current attaches */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct shminfo64 {
- unsigned long shmmax;
- unsigned long shmmin;
- unsigned long shmmni;
- unsigned long shmseg;
- unsigned long shmall;
- unsigned long __unused1;
- unsigned long __unused2;
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _ASM_MICROBLAZE_SHMBUF_H */
+#include <asm-generic/shmbuf.h>
diff --git a/arch/microblaze/include/asm/shmparam.h b/arch/microblaze/include/asm/shmparam.h
index 9f5fc2b3b6a3..93f30deb95d0 100644
--- a/arch/microblaze/include/asm/shmparam.h
+++ b/arch/microblaze/include/asm/shmparam.h
@@ -1,6 +1 @@
-#ifndef _ASM_MICROBLAZE_SHMPARAM_H
-#define _ASM_MICROBLAZE_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* _ASM_MICROBLAZE_SHMPARAM_H */
+#include <asm-generic/shmparam.h>
diff --git a/arch/microblaze/include/asm/siginfo.h b/arch/microblaze/include/asm/siginfo.h
index f162911a8f50..0815d29d82e5 100644
--- a/arch/microblaze/include/asm/siginfo.h
+++ b/arch/microblaze/include/asm/siginfo.h
@@ -1,15 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SIGINFO_H
-#define _ASM_MICROBLAZE_SIGINFO_H
-
-#include <linux/types.h>
#include <asm-generic/siginfo.h>
-
-#endif /* _ASM_MICROBLAZE_SIGINFO_H */
diff --git a/arch/microblaze/include/asm/signal.h b/arch/microblaze/include/asm/signal.h
index 46bc2267d949..7b1573ce19de 100644
--- a/arch/microblaze/include/asm/signal.h
+++ b/arch/microblaze/include/asm/signal.h
@@ -1,165 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- * Yasushi SHOJI <yashi@atmark-techno.com>
- * Tetsuya OHKAWA <tetsuya@atmark-techno.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SIGNAL_H
-#define _ASM_MICROBLAZE_SIGNAL_H
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-#define SA_RESTORER 0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-# ifndef __ASSEMBLY__
-# include <linux/types.h>
-# include <asm-generic/signal-defs.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-# ifdef __KERNEL__
-/*
- * Most things should be clean enough to redefine this at will, if care
- * is taken to make libc match.
- */
-# define _NSIG 64
-# define _NSIG_BPW 32
-# define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-
-# include <asm/sigcontext.h>
-# undef __HAVE_ARCH_SIG_BITOPS
-
-# define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-# else /* !__KERNEL__ */
-
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-# define NSIG 32
-typedef unsigned long sigset_t;
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-# define sa_handler _u._sa_handler
-# define sa_sigaction _u._sa_sigaction
-
-# endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_SIGNAL_H */
+#include <asm-generic/signal.h>
diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h
index 825936860314..6b71384b9d8b 100644
--- a/arch/microblaze/include/asm/socket.h
+++ b/arch/microblaze/include/asm/socket.h
@@ -1,69 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SOCKET_H
-#define _ASM_MICROBLAZE_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_SNDBUFFORCE 32
-#define SO_RCVBUFFORCE 33
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED 16
-#define SO_PEERCRED 17
-#define SO_RCVLOWAT 18
-#define SO_SNDLOWAT 19
-#define SO_RCVTIMEO 20
-#define SO_SNDTIMEO 21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-
-#define SO_PEERSEC 31
-#define SO_PASSSEC 34
-
-#define SO_TIMESTAMPNS 35
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-#define SO_MARK 36
-
-#define SO_TIMESTAMPING 37
-#define SCM_TIMESTAMPING SO_TIMESTAMPING
-
-#endif /* _ASM_MICROBLAZE_SOCKET_H */
+#include <asm-generic/socket.h>
diff --git a/arch/microblaze/include/asm/sockios.h b/arch/microblaze/include/asm/sockios.h
index 9fff57a701e1..def6d4746ee7 100644
--- a/arch/microblaze/include/asm/sockios.h
+++ b/arch/microblaze/include/asm/sockios.h
@@ -1,23 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SOCKIOS_H
-#define _ASM_MICROBLAZE_SOCKIOS_H
-
-#include <linux/ioctl.h>
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 0x8901
-#define SIOCSPGRP 0x8902
-#define FIOGETOWN 0x8903
-#define SIOCGPGRP 0x8904
-#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-
-#endif /* _ASM_MICROBLAZE_SOCKIOS_H */
+#include <asm-generic/sockios.h>
diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/asm/stat.h
index a15f77520bfd..3dc90fa92c70 100644
--- a/arch/microblaze/include/asm/stat.h
+++ b/arch/microblaze/include/asm/stat.h
@@ -1,68 +1 @@
-/*
- * Microblaze stat structure
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef _ASM_MICROBLAZE_STAT_H
-#define _ASM_MICROBLAZE_STAT_H
-
-#include <linux/posix_types.h>
-
-#define STAT_HAVE_NSEC 1
-
-struct stat {
- unsigned long st_dev;
- unsigned long st_ino;
- unsigned int st_mode;
- unsigned int st_nlink;
- unsigned int st_uid;
- unsigned int st_gid;
- unsigned long st_rdev;
- unsigned long __pad1;
- long st_size;
- int st_blksize;
- int __pad2;
- long st_blocks;
- int st_atime;
- unsigned int st_atime_nsec;
- int st_mtime;
- unsigned int st_mtime_nsec;
- int st_ctime;
- unsigned int st_ctime_nsec;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct stat64 {
- unsigned long long st_dev; /* Device. */
- unsigned long long st_ino; /* File serial number. */
- unsigned int st_mode; /* File mode. */
- unsigned int st_nlink; /* Link count. */
- unsigned int st_uid; /* User ID of the file's owner. */
- unsigned int st_gid; /* Group ID of the file's group. */
- unsigned long long st_rdev; /* Device number, if device. */
- unsigned long long __pad1;
- long long st_size; /* Size of file, in bytes. */
- int st_blksize; /* Optimal block size for I/O. */
- int __pad2;
- long long st_blocks; /* Number 512-byte blocks allocated. */
- int st_atime; /* Time of last access. */
- unsigned int st_atime_nsec;
- int st_mtime; /* Time of last modification. */
- unsigned int st_mtime_nsec;
- int st_ctime; /* Time of last status change. */
- unsigned int st_ctime_nsec;
- unsigned int __unused4;
- unsigned int __unused5;
-};
-
-#endif /* _ASM_MICROBLAZE_STAT_H */
-
+#include <asm-generic/stat.h>
diff --git a/arch/microblaze/include/asm/swab.h b/arch/microblaze/include/asm/swab.h
index b375d7b65ad7..7847e563ab66 100644
--- a/arch/microblaze/include/asm/swab.h
+++ b/arch/microblaze/include/asm/swab.h
@@ -1,8 +1 @@
-#ifndef _ASM_MICROBLAZE_SWAB_H
-#define _ASM_MICROBLAZE_SWAB_H
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#define __SWAB_64_THRU_32__
-#endif
-
-#endif /* _ASM_MICROBLAZE_SWAB_H */
+#include <asm-generic/swab.h>
diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h
index ddea9eb31f8d..720761cc741f 100644
--- a/arch/microblaze/include/asm/syscalls.h
+++ b/arch/microblaze/include/asm/syscalls.h
@@ -1,48 +1,8 @@
#ifndef __ASM_MICROBLAZE_SYSCALLS_H
-#define __ASM_MICROBLAZE_SYSCALLS_H
-#ifdef __KERNEL__
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-#include <linux/signal.h>
+asmlinkage long sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
+#define sys_clone sys_clone
-/* FIXME will be removed */
-asmlinkage int sys_ipc(uint call, int first, int second,
- int third, void *ptr, long fifth);
+#include <asm-generic/syscalls.h>
-struct pt_regs;
-asmlinkage int sys_vfork(struct pt_regs *regs);
-asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
-asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
- char __user *__user *envp, struct pt_regs *regs);
-
-asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff);
-
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, off_t offset);
-
-/* from signal.c */
-asmlinkage int sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs);
-
-asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
- struct pt_regs *regs);
-
-asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act,
- struct old_sigaction *oact);
-
-asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
- struct sigaction __user *oact, size_t sigsetsize);
-
-asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
- struct pt_regs *regs);
-
-asmlinkage int sys_sigreturn(struct pt_regs *regs);
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs);
-
-#endif /* __KERNEL__ */
#endif /* __ASM_MICROBLAZE_SYSCALLS_H */
diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h
index c4e308850b5d..b1ed61590660 100644
--- a/arch/microblaze/include/asm/system.h
+++ b/arch/microblaze/include/asm/system.h
@@ -13,6 +13,9 @@
#include <asm/setup.h>
#include <asm/irqflags.h>
+#include <asm-generic/cmpxchg.h>
+#include <asm-generic/cmpxchg-local.h>
+
struct task_struct;
struct thread_info;
diff --git a/arch/microblaze/include/asm/termbits.h b/arch/microblaze/include/asm/termbits.h
index a1b64bc4724a..3935b106de79 100644
--- a/arch/microblaze/include/asm/termbits.h
+++ b/arch/microblaze/include/asm/termbits.h
@@ -1,203 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TERMBITS_H
-#define _ASM_MICROBLAZE_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0020000
-#define IUTF8 0040000
-
-/* c_oflag bits */
-
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define BOTHER 0010000
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate (not used) */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-
-/* tcflow() and TCXONC use these */
-
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
-
-#endif /* _ASM_MICROBLAZE_TERMBITS_H */
+#include <asm-generic/termbits.h>
diff --git a/arch/microblaze/include/asm/termios.h b/arch/microblaze/include/asm/termios.h
index 47a46d1fbe26..280d78a9d966 100644
--- a/arch/microblaze/include/asm/termios.h
+++ b/arch/microblaze/include/asm/termios.h
@@ -1,88 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TERMIOS_H
-#define _ASM_MICROBLAZE_TERMIOS_H
-
-#include <linux/string.h>
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-#ifdef __KERNEL__
-/* intr=^C quit=^| erase=del kill=^U
- eof=^D vtime=\0 vmin=\1 sxtc=\0
- start=^Q stop=^S susp=^Z eol=\0
- reprint=^R discard=^U werase=^W lnext=^V
- eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* Modem lines */
-
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-/* Line disciplines */
-
-#define N_TTY 0
-#define N_SLIP 1
-#define N_MOUSE 2
-#define N_PPP 3
-#define N_STRIP 4
-#define N_AX25 5
-#define N_X25 6 /* X.25 async */
-#define N_6PACK 7
-#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964 9 /* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */
-#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards
- about SMS messages */
-#define N_HDLC 13 /* synchronous HDLC */
-#define N_SYNC_PPP 14
-#define N_HCI 15 /* Bluetooth HCI UART */
-
-#ifdef __KERNEL__
-
-#include <asm-generic/termios-base.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_MICROBLAZE_TERMIOS_H */
+#include <asm-generic/termios.h>
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index 7fac44498445..6e92885d381a 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -75,8 +75,6 @@ struct thread_info {
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#define INIT_THREAD_INFO(tsk) \
{ \
@@ -84,7 +82,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/microblaze/include/asm/timex.h b/arch/microblaze/include/asm/timex.h
index 678525dc6d0b..befcf3de5532 100644
--- a/arch/microblaze/include/asm/timex.h
+++ b/arch/microblaze/include/asm/timex.h
@@ -9,10 +9,8 @@
#ifndef _ASM_MICROBLAZE_TIMEX_H
#define _ASM_MICROBLAZE_TIMEX_H
-#define CLOCK_TICK_RATE 1000 /* Timer input freq. */
-
-typedef unsigned long cycles_t;
+#include <asm-generic/timex.h>
-#define get_cycles() (0)
+#define CLOCK_TICK_RATE 1000 /* Timer input freq. */
#endif /* _ASM_TIMEX_H */
diff --git a/arch/microblaze/include/asm/types.h b/arch/microblaze/include/asm/types.h
index bebc018318f5..b9e79bc580dd 100644
--- a/arch/microblaze/include/asm/types.h
+++ b/arch/microblaze/include/asm/types.h
@@ -1,38 +1 @@
-/*
- * Copyright (C) Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TYPES_H
-#define _ASM_MICROBLAZE_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue. However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-
-#include <asm-generic/int-ll64.h>
-
-# ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-# ifdef __KERNEL__
-# define BITS_PER_LONG 32
-
-/* Dma addresses are 32-bits wide. */
-
-typedef u32 dma_addr_t;
-
-# endif/* __KERNEL__ */
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_TYPES_H */
+#include <asm-generic/types.h>
diff --git a/arch/microblaze/include/asm/ucontext.h b/arch/microblaze/include/asm/ucontext.h
index 11f6bb3ae3a4..9bc07b9f30fb 100644
--- a/arch/microblaze/include/asm/ucontext.h
+++ b/arch/microblaze/include/asm/ucontext.h
@@ -1,22 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_UCONTEXT_H
-#define _ASM_MICROBLAZE_UCONTEXT_H
-
-#include <asm/sigcontext.h>
-
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct sigcontext uc_mcontext;
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-#endif /* _ASM_MICROBLAZE_UCONTEXT_H */
+#include <asm-generic/ucontext.h>
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index b5e2f5fa5c53..0b852327c0e7 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -380,8 +380,10 @@
#define __NR_accept04 362 /* new */
#define __NR_preadv 363 /* new */
#define __NR_pwritev 364 /* new */
+#define __NR_rt_tgsigqueueinfo 365 /* new */
+#define __NR_perf_counter_open 366 /* new */
-#define __NR_syscalls 365
+#define __NR_syscalls 367
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
@@ -408,7 +410,7 @@
#define __ARCH_WANT_SYS_SIGPENDING
#define __ARCH_WANT_SYS_SIGPROCMASK
#define __ARCH_WANT_SYS_RT_SIGACTION
-/* #define __ARCH_WANT_SYS_RT_SIGSUSPEND */
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
/*
* "Conditional" syscalls
diff --git a/arch/microblaze/include/asm/vga.h b/arch/microblaze/include/asm/vga.h
index 8b137891791f..89d82fd8fcf1 100644
--- a/arch/microblaze/include/asm/vga.h
+++ b/arch/microblaze/include/asm/vga.h
@@ -1 +1 @@
-
+#include <asm-generic/vga.h>
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
index 1fce6b803f54..9083d85376a4 100644
--- a/arch/microblaze/kernel/entry-nommu.S
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -551,30 +551,22 @@ no_work_pending:
rtid r14, 0
nop
-sys_vfork_wrapper:
- brid sys_vfork
+sys_vfork:
+ brid microblaze_vfork
addk r5, r1, r0
-sys_clone_wrapper:
- brid sys_clone
+sys_clone:
+ brid microblaze_clone
addk r7, r1, r0
-sys_execve_wrapper:
- brid sys_execve
+sys_execve:
+ brid microblaze_execve
addk r8, r1, r0
-sys_sigreturn_wrapper:
- brid sys_sigreturn
- addk r5, r1, r0
-
sys_rt_sigreturn_wrapper:
brid sys_rt_sigreturn
addk r5, r1, r0
-sys_sigsuspend_wrapper:
- brid sys_rt_sigsuspend
- addk r6, r1, r0
-
sys_rt_sigsuspend_wrapper:
brid sys_rt_sigsuspend
addk r7, r1, r0
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 91a0e7b185dd..c7353e79f4a2 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -429,12 +429,11 @@ C_ENTRY(ret_from_fork):
brid ret_from_trap; /* Do normal trap return */
nop;
-C_ENTRY(sys_vfork_wrapper):
+C_ENTRY(sys_vfork):
+ brid microblaze_vfork /* Do real work (tail-call) */
la r5, r1, PTO
- brid sys_vfork /* Do real work (tail-call) */
- nop
-C_ENTRY(sys_clone_wrapper):
+C_ENTRY(sys_clone):
bnei r6, 1f; /* See if child SP arg (arg 1) is 0. */
lwi r6, r1, PTO+PT_R1; /* If so, use paret's stack ptr */
1: la r7, r1, PTO; /* Arg 2: parent context */
@@ -444,20 +443,9 @@ C_ENTRY(sys_clone_wrapper):
brid do_fork /* Do real work (tail-call) */
nop;
-C_ENTRY(sys_execve_wrapper):
+C_ENTRY(sys_execve):
la r8, r1, PTO; /* add user context as 4th arg */
- brid sys_execve; /* Do real work (tail-call).*/
- nop;
-
-C_ENTRY(sys_sigsuspend_wrapper):
- swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
- swi r4, r1, PTO+PT_R4;
- la r6, r1, PTO; /* add user context as 2nd arg */
- bralid r15, sys_sigsuspend; /* Do real work.*/
- nop;
- lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
- lwi r4, r1, PTO+PT_R4;
- bri ret_from_trap /* fall through will not work here due to align */
+ brid microblaze_execve; /* Do real work (tail-call).*/
nop;
C_ENTRY(sys_rt_sigsuspend_wrapper):
@@ -471,18 +459,6 @@ C_ENTRY(sys_rt_sigsuspend_wrapper):
bri ret_from_trap /* fall through will not work here due to align */
nop;
-
-C_ENTRY(sys_sigreturn_wrapper):
- swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
- swi r4, r1, PTO+PT_R4;
- la r5, r1, PTO; /* add user context as 1st arg */
- brlid r15, sys_sigreturn; /* Do real work.*/
- nop;
- lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
- lwi r4, r1, PTO+PT_R4;
- bri ret_from_trap /* fall through will not work here due to align */
- nop;
-
C_ENTRY(sys_rt_sigreturn_wrapper):
swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
swi r4, r1, PTO+PT_R4;
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 4c0e6521b114..493819c25fba 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -45,91 +45,8 @@
asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall);
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs)
-{
- sigset_t saveset;
-
- mask &= _BLOCKABLE;
- spin_lock_irq(&current->sighand->siglock);
- saveset = current->blocked;
- siginitset(&current->blocked, mask);
- recalc_sigpending();
- spin_unlock_irq(&current->sighand->siglock);
-
- regs->r3 = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(regs, &saveset, 1))
- return -EINTR;
- }
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
- struct pt_regs *regs)
-{
- sigset_t saveset, newset;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (copy_from_user(&newset, unewset, sizeof(newset)))
- return -EFAULT;
- sigdelsetmask(&newset, ~_BLOCKABLE);
- spin_lock_irq(&current->sighand->siglock);
- saveset = current->blocked;
- current->blocked = newset;
- recalc_sigpending();
- spin_unlock_irq(&current->sighand->siglock);
-
- regs->r3 = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(regs, &saveset, 1))
- return -EINTR;
- }
-}
-
-asmlinkage int
-sys_sigaction(int sig, const struct old_sigaction *act,
- struct old_sigaction *oact)
-{
- struct k_sigaction new_ka, old_ka;
- int ret;
-
- if (act) {
- old_sigset_t mask;
- if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
- __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
- __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
- return -EFAULT;
- __get_user(new_ka.sa.sa_flags, &act->sa_flags);
- __get_user(mask, &act->sa_mask);
- siginitset(&new_ka.sa.sa_mask, mask);
- }
- ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
- if (!ret && oact) {
- if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
- __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
- __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
- return -EFAULT;
- __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
- __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
- }
-
- return ret;
-}
-
-asmlinkage int
+asmlinkage long
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
struct pt_regs *regs)
{
@@ -139,7 +56,6 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
/*
* Do a signal return; undo the signal stack.
*/
-
struct sigframe {
struct sigcontext sc;
unsigned long extramask[_NSIG_WORDS-1];
@@ -176,40 +92,7 @@ static int restore_sigcontext(struct pt_regs *regs,
return err;
}
-asmlinkage int sys_sigreturn(struct pt_regs *regs)
-{
- struct sigframe *frame =
- (struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
-
- sigset_t set;
- int rval;
-
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
- goto badframe;
-
- if (__get_user(set.sig[0], &frame->sc.oldmask)
- || (_NSIG_WORDS > 1
- && __copy_from_user(&set.sig[1], &frame->extramask,
- sizeof(frame->extramask))))
- goto badframe;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
-
- spin_lock_irq(&current->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(&current->sighand->siglock);
-
- if (restore_sigcontext(regs, &frame->sc, &rval))
- goto badframe;
- return rval;
-
-badframe:
- force_sig(SIGSEGV, current);
- return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
{
struct rt_sigframe __user *frame =
(struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE);
@@ -324,21 +207,17 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
/* minus 8 is offset to cater for "rtsd r15,8" */
- if (ka->sa.sa_flags & SA_RESTORER) {
- regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8;
- } else {
- /* addi r12, r0, __NR_sigreturn */
- err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
- frame->tramp + 0);
- /* brki r14, 0x8 */
- err |= __put_user(0xb9cc0008, frame->tramp + 1);
-
- /* Return from sighandler will jump to the tramp.
- Negative 8 offset because return is rtsd r15, 8 */
- regs->r15 = ((unsigned long)frame->tramp)-8;
-
- __invalidate_cache_sigtramp((unsigned long)frame->tramp);
- }
+ /* addi r12, r0, __NR_sigreturn */
+ err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
+ frame->tramp + 0);
+ /* brki r14, 0x8 */
+ err |= __put_user(0xb9cc0008, frame->tramp + 1);
+
+ /* Return from sighandler will jump to the tramp.
+ Negative 8 offset because return is rtsd r15, 8 */
+ regs->r15 = ((unsigned long)frame->tramp)-8;
+
+ __invalidate_cache_sigtramp((unsigned long)frame->tramp);
if (err)
goto give_sigsegv;
@@ -405,7 +284,7 @@ do_restart:
* OK, we're invoking a handler
*/
-static void
+static int
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
{
@@ -426,6 +305,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
+ return 1;
}
/*
@@ -456,7 +336,9 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall)
if (kernel_mode(regs))
return 1;
- if (!oldset)
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK)
+ oldset = &current->saved_sigmask;
+ else
oldset = &current->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
@@ -464,13 +346,31 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall)
/* Whee! Actually deliver the signal. */
if (in_syscall)
handle_restart(regs, &ka, 1);
- handle_signal(signr, &ka, &info, oldset, regs);
+ if (handle_signal(signr, &ka, &info, oldset, regs)) {
+ /*
+ * A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TS_RESTORE_SIGMASK flag.
+ */
+ current_thread_info()->status &=
+ ~TS_RESTORE_SIGMASK;
+ }
return 1;
}
if (in_syscall)
handle_restart(regs, NULL, 0);
+ /*
+ * If there's no signal to deliver, we just put the saved sigmask
+ * back.
+ */
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+ sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+ }
+
/* Did we come from a system call? */
return 0;
}
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index 31905ff590b7..8c9ebac5da10 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -39,7 +39,7 @@
*
* This is really horribly ugly. This will be remove with new toolchain.
*/
-asmlinkage int
+asmlinkage long
sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
{
int version, ret;
@@ -134,20 +134,20 @@ sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
return ret;
}
-asmlinkage int sys_vfork(struct pt_regs *regs)
+asmlinkage long microblaze_vfork(struct pt_regs *regs)
{
return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->r1,
regs, 0, NULL, NULL);
}
-asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs)
+asmlinkage long microblaze_clone(int flags, unsigned long stack, struct pt_regs *regs)
{
if (!stack)
stack = regs->r1;
return do_fork(flags, stack, regs, 0, NULL, NULL);
}
-asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
+asmlinkage long microblaze_execve(char __user *filenamei, char __user *__user *argv,
char __user *__user *envp, struct pt_regs *regs)
{
int error;
@@ -163,8 +163,8 @@ out:
return error;
}
-asmlinkage unsigned long
-sys_mmap2(unsigned long addr, size_t len,
+asmlinkage long
+sys_mmap2(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
unsigned long fd, unsigned long pgoff)
{
@@ -189,18 +189,18 @@ out:
return ret;
}
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
- unsigned long fd, off_t offset)
+ unsigned long fd, off_t pgoff)
{
int err = -EINVAL;
- if (offset & ~PAGE_MASK) {
+ if (pgoff & ~PAGE_MASK) {
printk(KERN_INFO "no pagemask in mmap\r\n");
goto out;
}
- err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+ err = sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT);
out:
return err;
}
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 376d1789f7c0..31b32a6c5f4e 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -15,7 +15,7 @@ ENTRY(sys_call_table)
.long sys_creat
.long sys_link
.long sys_unlink /* 10 */
- .long sys_execve_wrapper
+ .long sys_execve
.long sys_chdir
.long sys_time
.long sys_mknod
@@ -71,12 +71,12 @@ ENTRY(sys_call_table)
.long sys_getppid
.long sys_getpgrp /* 65 */
.long sys_setsid
- .long sys_sigaction
+ .long sys_ni_syscall /* sys_sigaction */
.long sys_sgetmask
.long sys_ssetmask
.long sys_setreuid /* 70 */
.long sys_setregid
- .long sys_sigsuspend_wrapper
+ .long sys_ni_syscall /* sys_sigsuspend_wrapper */
.long sys_sigpending
.long sys_sethostname
.long sys_setrlimit /* 75 */
@@ -123,8 +123,8 @@ ENTRY(sys_call_table)
.long sys_sysinfo
.long sys_ipc
.long sys_fsync
- .long sys_sigreturn_wrapper
- .long sys_clone_wrapper /* 120 */
+ .long sys_ni_syscall /* sys_sigreturn_wrapper */
+ .long sys_clone /* 120 */
.long sys_setdomainname
.long sys_newuname
.long sys_ni_syscall /* modify_ldt */
@@ -194,7 +194,7 @@ ENTRY(sys_call_table)
.long sys_sendfile
.long sys_ni_syscall /* reserved for streams1 */
.long sys_ni_syscall /* reserved for streams2 */
- .long sys_vfork_wrapper /* 190 */
+ .long sys_vfork /* 190 */
.long sys_getrlimit
.long sys_mmap2 /* mmap2 */
.long sys_truncate64
@@ -369,3 +369,5 @@ ENTRY(sys_call_table)
.long sys_ni_syscall
.long sys_ni_syscall
.long sys_ni_syscall
+ .long sys_rt_tgsigqueueinfo /* 365 */
+ .long sys_perf_counter_open
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index 71c8cb6c9e43..b579db068c06 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -2,7 +2,7 @@
# Makefile
#
-lib-y := memset.o checksum.o
+lib-y := memset.o
ifeq ($(CONFIG_OPT_LIB_ASM),y)
lib-y += fastcopy.o
diff --git a/arch/microblaze/lib/checksum.c b/arch/microblaze/lib/checksum.c
deleted file mode 100644
index f08e74591418..000000000000
--- a/arch/microblaze/lib/checksum.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- *
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * IP/TCP/UDP checksumming routines
- *
- * Authors: Jorge Cwik, <jorge@laser.satlink.net>
- * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- * Tom May, <ftom@netcom.com>
- * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
- * Lots of code moved from tcp.c and ip.c; see those files
- * for more names.
- *
- * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek:
- * Fixed some nasty bugs, causing some horrible crashes.
- * A: At some points, the sum (%0) was used as
- * length-counter instead of the length counter
- * (%1). Thanks to Roman Hodek for pointing this out.
- * B: GCC seems to mess up if one uses too many
- * data-registers to hold input values and one tries to
- * specify d0 and d1 as scratch registers. Letting gcc
- * choose these registers itself solves the problem.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access
- kills, so most of the assembly has to go. */
-
-#include <linux/module.h>
-#include <net/checksum.h>
-
-#include <asm/byteorder.h>
-
-static inline unsigned short from32to16(unsigned long x)
-{
- /* add up 16-bit and 16-bit for 16+c bit */
- x = (x & 0xffff) + (x >> 16);
- /* add up carry.. */
- x = (x & 0xffff) + (x >> 16);
- return x;
-}
-
-static unsigned int do_csum(const unsigned char *buff, int len)
-{
- int odd, count;
- unsigned long result = 0;
-
- if (len <= 0)
- goto out;
- odd = 1 & (unsigned long) buff;
- if (odd) {
- result = *buff;
- len--;
- buff++;
- }
- count = len >> 1; /* nr of 16-bit words.. */
- if (count) {
- if (2 & (unsigned long) buff) {
- result += *(unsigned short *) buff;
- count--;
- len -= 2;
- buff += 2;
- }
- count >>= 1; /* nr of 32-bit words.. */
- if (count) {
- unsigned long carry = 0;
- do {
- unsigned long w = *(unsigned long *) buff;
- count--;
- buff += 4;
- result += carry;
- result += w;
- carry = (w > result);
- } while (count);
- result += carry;
- result = (result & 0xffff) + (result >> 16);
- }
- if (len & 2) {
- result += *(unsigned short *) buff;
- buff += 2;
- }
- }
- if (len & 1)
- result += (*buff << 8);
- result = from32to16(result);
- if (odd)
- result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
- return result;
-}
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
- return (__force __sum16)~do_csum(iph, ihl*4);
-}
-EXPORT_SYMBOL(ip_fast_csum);
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum wsum)
-{
- unsigned int sum = (__force unsigned int)wsum;
- unsigned int result = do_csum(buff, len);
-
- /* add in old sum, and carry.. */
- result += sum;
- if (sum > result)
- result += 1;
- return (__force __wsum)result;
-}
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
- return (__force __sum16)~do_csum(buff, len);
-}
-EXPORT_SYMBOL(ip_compute_csum);
-
-/*
- * copy from fs while checksumming, otherwise like csum_partial
- */
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len,
- __wsum sum, int *csum_err)
-{
- int missing;
-
- missing = __copy_from_user(dst, src, len);
- if (missing) {
- memset(dst + len - missing, 0, missing);
- *csum_err = -EFAULT;
- } else
- *csum_err = 0;
-
- return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-
-/*
- * copy from ds while checksumming, otherwise like csum_partial
- */
-__wsum
-csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
-{
- memcpy(dst, src, len);
- return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy);
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index b5a701cd71e0..8d92c4efe9a4 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -80,15 +80,15 @@ void __init setup_memory(void)
memory_size = memory_end - memory_start;
PAGE_OFFSET = memory_start;
printk(KERN_INFO "%s: Main mem: 0x%x-0x%x, "
- "size 0x%08x\n", __func__, memory_start,
- memory_end, memory_size);
+ "size 0x%08x\n", __func__, (u32) memory_start,
+ (u32) memory_end, (u32) memory_size);
break;
}
}
if (!memory_start || !memory_end) {
panic("%s: Missing memory setting 0x%08x-0x%08x\n",
- __func__, memory_start, memory_end);
+ __func__, (u32) memory_start, (u32) memory_end);
}
/* reservation of region where is the kernel */
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8c4be1f301cf..3ca0fe1a9123 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -22,6 +22,26 @@ choice
config MACH_ALCHEMY
bool "Alchemy processor based machines"
+config AR7
+ bool "Texas Instruments AR7"
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select CEVT_R4K
+ select CSRC_R4K
+ select IRQ_CPU
+ select NO_EXCEPT_FILL
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select GENERIC_GPIO
+ select GCD
+ select VLYNQ
+ help
+ Support for the Texas Instruments AR7 System-on-a-Chip
+ family: TNETD7100, 7200 and 7300.
+
config BASLER_EXCITE
bool "Basler eXcite smart camera"
select CEVT_R4K
@@ -209,7 +229,7 @@ config MIPS_MALTA
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_MIPS_CMP if BROKEN # because SYNC_R4K is broken
+ select SYS_SUPPORTS_MIPS_CMP
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_SMARTMIPS
help
@@ -247,6 +267,7 @@ config MACH_VR41XX
select CEVT_R4K
select CSRC_R4K
select SYS_HAS_CPU_VR41XX
+ select ARCH_REQUIRE_GPIOLIB
config NXP_STB220
bool "NXP STB220 board"
@@ -1635,7 +1656,7 @@ config MIPS_APSP_KSPD
config MIPS_CMP
bool "MIPS CMP framework support"
depends on SYS_SUPPORTS_MIPS_CMP
- select SYNC_R4K if BROKEN
+ select SYNC_R4K
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_SCHED_SMT if SMP
select WEAK_ORDERING
@@ -2147,11 +2168,11 @@ menu "Power management options"
config ARCH_HIBERNATION_POSSIBLE
def_bool y
- depends on SYS_SUPPORTS_HOTPLUG_CPU
+ depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
config ARCH_SUSPEND_POSSIBLE
def_bool y
- depends on SYS_SUPPORTS_HOTPLUG_CPU
+ depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
source "kernel/power/Kconfig"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 807572a6a4d2..861da514a468 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -173,6 +173,13 @@ libs-y += arch/mips/fw/lib/
#
#
+# Texas Instruments AR7
+#
+core-$(CONFIG_AR7) += arch/mips/ar7/
+cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7
+load-$(CONFIG_AR7) += 0xffffffff94100000
+
+#
# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
#
core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
diff --git a/arch/mips/ar7/Makefile b/arch/mips/ar7/Makefile
new file mode 100644
index 000000000000..7435e44b3964
--- /dev/null
+++ b/arch/mips/ar7/Makefile
@@ -0,0 +1,10 @@
+
+obj-y := \
+ prom.o \
+ setup.o \
+ memory.o \
+ irq.o \
+ time.o \
+ platform.o \
+ gpio.o \
+ clock.o
diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c
new file mode 100644
index 000000000000..27dc6663f2fa
--- /dev/null
+++ b/arch/mips/ar7/clock.c
@@ -0,0 +1,440 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gcd.h>
+#include <linux/io.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define BOOT_PLL_SOURCE_MASK 0x3
+#define CPU_PLL_SOURCE_SHIFT 16
+#define BUS_PLL_SOURCE_SHIFT 14
+#define USB_PLL_SOURCE_SHIFT 18
+#define DSP_PLL_SOURCE_SHIFT 22
+#define BOOT_PLL_SOURCE_AFE 0
+#define BOOT_PLL_SOURCE_BUS 0
+#define BOOT_PLL_SOURCE_REF 1
+#define BOOT_PLL_SOURCE_XTAL 2
+#define BOOT_PLL_SOURCE_CPU 3
+#define BOOT_PLL_BYPASS 0x00000020
+#define BOOT_PLL_ASYNC_MODE 0x02000000
+#define BOOT_PLL_2TO1_MODE 0x00008000
+
+#define TNETD7200_CLOCK_ID_CPU 0
+#define TNETD7200_CLOCK_ID_DSP 1
+#define TNETD7200_CLOCK_ID_USB 2
+
+#define TNETD7200_DEF_CPU_CLK 211000000
+#define TNETD7200_DEF_DSP_CLK 125000000
+#define TNETD7200_DEF_USB_CLK 48000000
+
+struct tnetd7300_clock {
+ u32 ctrl;
+#define PREDIV_MASK 0x001f0000
+#define PREDIV_SHIFT 16
+#define POSTDIV_MASK 0x0000001f
+ u32 unused1[3];
+ u32 pll;
+#define MUL_MASK 0x0000f000
+#define MUL_SHIFT 12
+#define PLL_MODE_MASK 0x00000001
+#define PLL_NDIV 0x00000800
+#define PLL_DIV 0x00000002
+#define PLL_STATUS 0x00000001
+ u32 unused2[3];
+};
+
+struct tnetd7300_clocks {
+ struct tnetd7300_clock bus;
+ struct tnetd7300_clock cpu;
+ struct tnetd7300_clock usb;
+ struct tnetd7300_clock dsp;
+};
+
+struct tnetd7200_clock {
+ u32 ctrl;
+ u32 unused1[3];
+#define DIVISOR_ENABLE_MASK 0x00008000
+ u32 mul;
+ u32 prediv;
+ u32 postdiv;
+ u32 postdiv2;
+ u32 unused2[6];
+ u32 cmd;
+ u32 status;
+ u32 cmden;
+ u32 padding[15];
+};
+
+struct tnetd7200_clocks {
+ struct tnetd7200_clock cpu;
+ struct tnetd7200_clock dsp;
+ struct tnetd7200_clock usb;
+};
+
+int ar7_cpu_clock = 150000000;
+EXPORT_SYMBOL(ar7_cpu_clock);
+int ar7_bus_clock = 125000000;
+EXPORT_SYMBOL(ar7_bus_clock);
+int ar7_dsp_clock;
+EXPORT_SYMBOL(ar7_dsp_clock);
+
+static void approximate(int base, int target, int *prediv,
+ int *postdiv, int *mul)
+{
+ int i, j, k, freq, res = target;
+ for (i = 1; i <= 16; i++)
+ for (j = 1; j <= 32; j++)
+ for (k = 1; k <= 32; k++) {
+ freq = abs(base / j * i / k - target);
+ if (freq < res) {
+ res = freq;
+ *mul = i;
+ *prediv = j;
+ *postdiv = k;
+ }
+ }
+}
+
+static void calculate(int base, int target, int *prediv, int *postdiv,
+ int *mul)
+{
+ int tmp_gcd, tmp_base, tmp_freq;
+
+ for (*prediv = 1; *prediv <= 32; (*prediv)++) {
+ tmp_base = base / *prediv;
+ tmp_gcd = gcd(target, tmp_base);
+ *mul = target / tmp_gcd;
+ *postdiv = tmp_base / tmp_gcd;
+ if ((*mul < 1) || (*mul >= 16))
+ continue;
+ if ((*postdiv > 0) & (*postdiv <= 32))
+ break;
+ }
+
+ if (base / *prediv * *mul / *postdiv != target) {
+ approximate(base, target, prediv, postdiv, mul);
+ tmp_freq = base / *prediv * *mul / *postdiv;
+ printk(KERN_WARNING
+ "Adjusted requested frequency %d to %d\n",
+ target, tmp_freq);
+ }
+
+ printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n",
+ *prediv, *postdiv, *mul);
+}
+
+static int tnetd7300_dsp_clock(void)
+{
+ u32 didr1, didr2;
+ u8 rev = ar7_chip_rev();
+ didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18));
+ didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c));
+ if (didr2 & (1 << 23))
+ return 0;
+ if ((rev >= 0x23) && (rev != 0x57))
+ return 250000000;
+ if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22))
+ > 4208000)
+ return 250000000;
+ return 0;
+}
+
+static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock,
+ u32 *bootcr, u32 bus_clock)
+{
+ int product;
+ int base_clock = AR7_REF_CLOCK;
+ u32 ctrl = readl(&clock->ctrl);
+ u32 pll = readl(&clock->pll);
+ int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1;
+ int postdiv = (ctrl & POSTDIV_MASK) + 1;
+ int divisor = prediv * postdiv;
+ int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1;
+
+ switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+ case BOOT_PLL_SOURCE_BUS:
+ base_clock = bus_clock;
+ break;
+ case BOOT_PLL_SOURCE_REF:
+ base_clock = AR7_REF_CLOCK;
+ break;
+ case BOOT_PLL_SOURCE_XTAL:
+ base_clock = AR7_XTAL_CLOCK;
+ break;
+ case BOOT_PLL_SOURCE_CPU:
+ base_clock = ar7_cpu_clock;
+ break;
+ }
+
+ if (*bootcr & BOOT_PLL_BYPASS)
+ return base_clock / divisor;
+
+ if ((pll & PLL_MODE_MASK) == 0)
+ return (base_clock >> (mul / 16 + 1)) / divisor;
+
+ if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) {
+ product = (mul & 1) ?
+ (base_clock * mul) >> 1 :
+ (base_clock * (mul - 1)) >> 2;
+ return product / divisor;
+ }
+
+ if (mul == 16)
+ return base_clock / divisor;
+
+ return base_clock * mul / divisor;
+}
+
+static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
+ u32 *bootcr, u32 frequency)
+{
+ int prediv, postdiv, mul;
+ int base_clock = ar7_bus_clock;
+
+ switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+ case BOOT_PLL_SOURCE_BUS:
+ base_clock = ar7_bus_clock;
+ break;
+ case BOOT_PLL_SOURCE_REF:
+ base_clock = AR7_REF_CLOCK;
+ break;
+ case BOOT_PLL_SOURCE_XTAL:
+ base_clock = AR7_XTAL_CLOCK;
+ break;
+ case BOOT_PLL_SOURCE_CPU:
+ base_clock = ar7_cpu_clock;
+ break;
+ }
+
+ calculate(base_clock, frequency, &prediv, &postdiv, &mul);
+
+ writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
+ msleep(1);
+ writel(4, &clock->pll);
+ while (readl(&clock->pll) & PLL_STATUS)
+ ;
+ writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
+ msleep(75);
+}
+
+static void __init tnetd7300_init_clocks(void)
+{
+ u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+ struct tnetd7300_clocks *clocks =
+ ioremap_nocache(UR8_REGS_CLOCKS,
+ sizeof(struct tnetd7300_clocks));
+
+ ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
+ &clocks->bus, bootcr, AR7_AFE_CLOCK);
+
+ if (*bootcr & BOOT_PLL_ASYNC_MODE)
+ ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
+ &clocks->cpu, bootcr, AR7_AFE_CLOCK);
+ else
+ ar7_cpu_clock = ar7_bus_clock;
+
+ if (ar7_dsp_clock == 250000000)
+ tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp,
+ bootcr, ar7_dsp_clock);
+
+ iounmap(clocks);
+ iounmap(bootcr);
+}
+
+static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock,
+ u32 *bootcr, u32 bus_clock)
+{
+ int divisor = ((readl(&clock->prediv) & 0x1f) + 1) *
+ ((readl(&clock->postdiv) & 0x1f) + 1);
+
+ if (*bootcr & BOOT_PLL_BYPASS)
+ return base / divisor;
+
+ return base * ((readl(&clock->mul) & 0xf) + 1) / divisor;
+}
+
+
+static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock,
+ int prediv, int postdiv, int postdiv2, int mul, u32 frequency)
+{
+ printk(KERN_INFO
+ "Clocks: base = %d, frequency = %u, prediv = %d, "
+ "postdiv = %d, postdiv2 = %d, mul = %d\n",
+ base, frequency, prediv, postdiv, postdiv2, mul);
+
+ writel(0, &clock->ctrl);
+ writel(DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F), &clock->prediv);
+ writel((mul - 1) & 0xF, &clock->mul);
+
+ while (readl(&clock->status) & 0x1)
+ ; /* nop */
+
+ writel(DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F), &clock->postdiv);
+
+ writel(readl(&clock->cmden) | 1, &clock->cmden);
+ writel(readl(&clock->cmd) | 1, &clock->cmd);
+
+ while (readl(&clock->status) & 0x1)
+ ; /* nop */
+
+ writel(DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F), &clock->postdiv2);
+
+ writel(readl(&clock->cmden) | 1, &clock->cmden);
+ writel(readl(&clock->cmd) | 1, &clock->cmd);
+
+ while (readl(&clock->status) & 0x1)
+ ; /* nop */
+
+ writel(readl(&clock->ctrl) | 1, &clock->ctrl);
+}
+
+static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr)
+{
+ if (*bootcr & BOOT_PLL_ASYNC_MODE)
+ /* Async */
+ switch (clock_id) {
+ case TNETD7200_CLOCK_ID_DSP:
+ return AR7_REF_CLOCK;
+ default:
+ return AR7_AFE_CLOCK;
+ }
+ else
+ /* Sync */
+ if (*bootcr & BOOT_PLL_2TO1_MODE)
+ /* 2:1 */
+ switch (clock_id) {
+ case TNETD7200_CLOCK_ID_DSP:
+ return AR7_REF_CLOCK;
+ default:
+ return AR7_AFE_CLOCK;
+ }
+ else
+ /* 1:1 */
+ return AR7_REF_CLOCK;
+}
+
+
+static void __init tnetd7200_init_clocks(void)
+{
+ u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+ struct tnetd7200_clocks *clocks =
+ ioremap_nocache(AR7_REGS_CLOCKS,
+ sizeof(struct tnetd7200_clocks));
+ int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv;
+ int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv;
+ int usb_base, usb_mul, usb_prediv, usb_postdiv;
+
+ cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr);
+ dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr);
+
+ if (*bootcr & BOOT_PLL_ASYNC_MODE) {
+ printk(KERN_INFO "Clocks: Async mode\n");
+
+ printk(KERN_INFO "Clocks: Setting DSP clock\n");
+ calculate(dsp_base, TNETD7200_DEF_DSP_CLK,
+ &dsp_prediv, &dsp_postdiv, &dsp_mul);
+ ar7_bus_clock =
+ ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv;
+ tnetd7200_set_clock(dsp_base, &clocks->dsp,
+ dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
+ ar7_bus_clock);
+
+ printk(KERN_INFO "Clocks: Setting CPU clock\n");
+ calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
+ &cpu_postdiv, &cpu_mul);
+ ar7_cpu_clock =
+ ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv;
+ tnetd7200_set_clock(cpu_base, &clocks->cpu,
+ cpu_prediv, cpu_postdiv, -1, cpu_mul,
+ ar7_cpu_clock);
+
+ } else
+ if (*bootcr & BOOT_PLL_2TO1_MODE) {
+ printk(KERN_INFO "Clocks: Sync 2:1 mode\n");
+
+ printk(KERN_INFO "Clocks: Setting CPU clock\n");
+ calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
+ &cpu_postdiv, &cpu_mul);
+ ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul)
+ / cpu_postdiv;
+ tnetd7200_set_clock(cpu_base, &clocks->cpu,
+ cpu_prediv, cpu_postdiv, -1, cpu_mul,
+ ar7_cpu_clock);
+
+ printk(KERN_INFO "Clocks: Setting DSP clock\n");
+ calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
+ &dsp_postdiv, &dsp_mul);
+ ar7_bus_clock = ar7_cpu_clock / 2;
+ tnetd7200_set_clock(dsp_base, &clocks->dsp,
+ dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
+ dsp_mul * 2, ar7_bus_clock);
+ } else {
+ printk(KERN_INFO "Clocks: Sync 1:1 mode\n");
+
+ printk(KERN_INFO "Clocks: Setting DSP clock\n");
+ calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
+ &dsp_postdiv, &dsp_mul);
+ ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul)
+ / dsp_postdiv;
+ tnetd7200_set_clock(dsp_base, &clocks->dsp,
+ dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
+ dsp_mul * 2, ar7_bus_clock);
+
+ ar7_cpu_clock = ar7_bus_clock;
+ }
+
+ printk(KERN_INFO "Clocks: Setting USB clock\n");
+ usb_base = ar7_bus_clock;
+ calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv,
+ &usb_postdiv, &usb_mul);
+ tnetd7200_set_clock(usb_base, &clocks->usb,
+ usb_prediv, usb_postdiv, -1, usb_mul,
+ TNETD7200_DEF_USB_CLK);
+
+ ar7_dsp_clock = ar7_cpu_clock;
+
+ iounmap(clocks);
+ iounmap(bootcr);
+}
+
+int __init ar7_init_clocks(void)
+{
+ switch (ar7_chip_id()) {
+ case AR7_CHIP_7100:
+ case AR7_CHIP_7200:
+ tnetd7200_init_clocks();
+ break;
+ case AR7_CHIP_7300:
+ ar7_dsp_clock = tnetd7300_dsp_clock();
+ tnetd7300_init_clocks();
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+arch_initcall(ar7_init_clocks);
diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
new file mode 100644
index 000000000000..74e14a3dbf4a
--- /dev/null
+++ b/arch/mips/ar7/gpio.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach-ar7/gpio.h>
+
+static const char *ar7_gpio_list[AR7_GPIO_MAX];
+
+int gpio_request(unsigned gpio, const char *label)
+{
+ if (gpio >= AR7_GPIO_MAX)
+ return -EINVAL;
+
+ if (ar7_gpio_list[gpio])
+ return -EBUSY;
+
+ if (label)
+ ar7_gpio_list[gpio] = label;
+ else
+ ar7_gpio_list[gpio] = "busy";
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+ BUG_ON(!ar7_gpio_list[gpio]);
+ ar7_gpio_list[gpio] = NULL;
+}
+EXPORT_SYMBOL(gpio_free);
diff --git a/arch/mips/ar7/irq.c b/arch/mips/ar7/irq.c
new file mode 100644
index 000000000000..c781556c44e4
--- /dev/null
+++ b/arch/mips/ar7/irq.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define EXCEPT_OFFSET 0x80
+#define PACE_OFFSET 0xA0
+#define CHNLS_OFFSET 0x200
+
+#define REG_OFFSET(irq, reg) ((irq) / 32 * 0x4 + reg * 0x10)
+#define SEC_REG_OFFSET(reg) (EXCEPT_OFFSET + reg * 0x8)
+#define SEC_SR_OFFSET (SEC_REG_OFFSET(0)) /* 0x80 */
+#define CR_OFFSET(irq) (REG_OFFSET(irq, 1)) /* 0x10 */
+#define SEC_CR_OFFSET (SEC_REG_OFFSET(1)) /* 0x88 */
+#define ESR_OFFSET(irq) (REG_OFFSET(irq, 2)) /* 0x20 */
+#define SEC_ESR_OFFSET (SEC_REG_OFFSET(2)) /* 0x90 */
+#define ECR_OFFSET(irq) (REG_OFFSET(irq, 3)) /* 0x30 */
+#define SEC_ECR_OFFSET (SEC_REG_OFFSET(3)) /* 0x98 */
+#define PIR_OFFSET (0x40)
+#define MSR_OFFSET (0x44)
+#define PM_OFFSET(irq) (REG_OFFSET(irq, 5)) /* 0x50 */
+#define TM_OFFSET(irq) (REG_OFFSET(irq, 6)) /* 0x60 */
+
+#define REG(addr) ((u32 *)(KSEG1ADDR(AR7_REGS_IRQ) + addr))
+
+#define CHNL_OFFSET(chnl) (CHNLS_OFFSET + (chnl * 4))
+
+static int ar7_irq_base;
+
+static void ar7_unmask_irq(unsigned int irq)
+{
+ writel(1 << ((irq - ar7_irq_base) % 32),
+ REG(ESR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_mask_irq(unsigned int irq)
+{
+ writel(1 << ((irq - ar7_irq_base) % 32),
+ REG(ECR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_ack_irq(unsigned int irq)
+{
+ writel(1 << ((irq - ar7_irq_base) % 32),
+ REG(CR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_unmask_sec_irq(unsigned int irq)
+{
+ writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ESR_OFFSET));
+}
+
+static void ar7_mask_sec_irq(unsigned int irq)
+{
+ writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ECR_OFFSET));
+}
+
+static void ar7_ack_sec_irq(unsigned int irq)
+{
+ writel(1 << (irq - ar7_irq_base - 40), REG(SEC_CR_OFFSET));
+}
+
+static struct irq_chip ar7_irq_type = {
+ .name = "AR7",
+ .unmask = ar7_unmask_irq,
+ .mask = ar7_mask_irq,
+ .ack = ar7_ack_irq
+};
+
+static struct irq_chip ar7_sec_irq_type = {
+ .name = "AR7",
+ .unmask = ar7_unmask_sec_irq,
+ .mask = ar7_mask_sec_irq,
+ .ack = ar7_ack_sec_irq,
+};
+
+static struct irqaction ar7_cascade_action = {
+ .handler = no_action,
+ .name = "AR7 cascade interrupt"
+};
+
+static void __init ar7_irq_init(int base)
+{
+ int i;
+ /*
+ * Disable interrupts and clear pending
+ */
+ writel(0xffffffff, REG(ECR_OFFSET(0)));
+ writel(0xff, REG(ECR_OFFSET(32)));
+ writel(0xffffffff, REG(SEC_ECR_OFFSET));
+ writel(0xffffffff, REG(CR_OFFSET(0)));
+ writel(0xff, REG(CR_OFFSET(32)));
+ writel(0xffffffff, REG(SEC_CR_OFFSET));
+
+ ar7_irq_base = base;
+
+ for (i = 0; i < 40; i++) {
+ writel(i, REG(CHNL_OFFSET(i)));
+ /* Primary IRQ's */
+ set_irq_chip_and_handler(base + i, &ar7_irq_type,
+ handle_level_irq);
+ /* Secondary IRQ's */
+ if (i < 32)
+ set_irq_chip_and_handler(base + i + 40,
+ &ar7_sec_irq_type,
+ handle_level_irq);
+ }
+
+ setup_irq(2, &ar7_cascade_action);
+ setup_irq(ar7_irq_base, &ar7_cascade_action);
+ set_c0_status(IE_IRQ0);
+}
+
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init();
+ ar7_irq_init(8);
+}
+
+static void ar7_cascade(void)
+{
+ u32 status;
+ int i, irq;
+
+ /* Primary IRQ's */
+ irq = readl(REG(PIR_OFFSET)) & 0x3f;
+ if (irq) {
+ do_IRQ(ar7_irq_base + irq);
+ return;
+ }
+
+ /* Secondary IRQ's are cascaded through primary '0' */
+ writel(1, REG(CR_OFFSET(irq)));
+ status = readl(REG(SEC_SR_OFFSET));
+ for (i = 0; i < 32; i++) {
+ if (status & 1) {
+ do_IRQ(ar7_irq_base + i + 40);
+ return;
+ }
+ status >>= 1;
+ }
+
+ spurious_interrupt();
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+ if (pending & STATUSF_IP7) /* cpu timer */
+ do_IRQ(7);
+ else if (pending & STATUSF_IP2) /* int0 hardware line */
+ ar7_cascade();
+ else
+ spurious_interrupt();
+}
diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c
new file mode 100644
index 000000000000..46fed44825a6
--- /dev/null
+++ b/arch/mips/ar7/memory.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/pfn.h>
+#include <linux/proc_fs.h>
+#include <linux/string.h>
+#include <linux/swap.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mips-boards/prom.h>
+
+static int __init memsize(void)
+{
+ u32 size = (64 << 20);
+ u32 *addr = (u32 *)KSEG1ADDR(AR7_SDRAM_BASE + size - 4);
+ u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end));
+ u32 *tmpaddr = addr;
+
+ while (tmpaddr > kernel_end) {
+ *tmpaddr = (u32)tmpaddr;
+ size >>= 1;
+ tmpaddr -= size >> 2;
+ }
+
+ do {
+ tmpaddr += size >> 2;
+ if (*tmpaddr != (u32)tmpaddr)
+ break;
+ size <<= 1;
+ } while (size < (64 << 20));
+
+ writel(tmpaddr, &addr);
+
+ return size;
+}
+
+void __init prom_meminit(void)
+{
+ unsigned long pages;
+
+ pages = memsize() >> PAGE_SHIFT;
+ add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT,
+ BOOT_MEM_RAM);
+}
+
+void __init prom_free_prom_memory(void)
+{
+ /* Nothing to free */
+}
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
new file mode 100644
index 000000000000..542244961780
--- /dev/null
+++ b/arch/mips/ar7/platform.c
@@ -0,0 +1,555 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/version.h>
+#include <linux/vlynq.h>
+#include <linux/leds.h>
+#include <linux/string.h>
+#include <linux/etherdevice.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/gpio.h>
+#include <asm/mach-ar7/prom.h>
+
+struct plat_vlynq_data {
+ struct plat_vlynq_ops ops;
+ int gpio_bit;
+ int reset_bit;
+};
+
+
+static int vlynq_on(struct vlynq_device *dev)
+{
+ int result;
+ struct plat_vlynq_data *pdata = dev->dev.platform_data;
+
+ result = gpio_request(pdata->gpio_bit, "vlynq");
+ if (result)
+ goto out;
+
+ ar7_device_reset(pdata->reset_bit);
+
+ result = ar7_gpio_disable(pdata->gpio_bit);
+ if (result)
+ goto out_enabled;
+
+ result = ar7_gpio_enable(pdata->gpio_bit);
+ if (result)
+ goto out_enabled;
+
+ result = gpio_direction_output(pdata->gpio_bit, 0);
+ if (result)
+ goto out_gpio_enabled;
+
+ msleep(50);
+
+ gpio_set_value(pdata->gpio_bit, 1);
+ msleep(50);
+
+ return 0;
+
+out_gpio_enabled:
+ ar7_gpio_disable(pdata->gpio_bit);
+out_enabled:
+ ar7_device_disable(pdata->reset_bit);
+ gpio_free(pdata->gpio_bit);
+out:
+ return result;
+}
+
+static void vlynq_off(struct vlynq_device *dev)
+{
+ struct plat_vlynq_data *pdata = dev->dev.platform_data;
+ ar7_gpio_disable(pdata->gpio_bit);
+ gpio_free(pdata->gpio_bit);
+ ar7_device_disable(pdata->reset_bit);
+}
+
+static struct resource physmap_flash_resource = {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x10000000,
+ .end = 0x107fffff,
+};
+
+static struct resource cpmac_low_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_MAC0,
+ .end = AR7_REGS_MAC0 + 0x7ff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 27,
+ .end = 27,
+ },
+};
+
+static struct resource cpmac_high_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_MAC1,
+ .end = AR7_REGS_MAC1 + 0x7ff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 41,
+ .end = 41,
+ },
+};
+
+static struct resource vlynq_low_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_VLYNQ0,
+ .end = AR7_REGS_VLYNQ0 + 0xff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 29,
+ .end = 29,
+ },
+ {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x04000000,
+ .end = 0x04ffffff,
+ },
+ {
+ .name = "devirq",
+ .flags = IORESOURCE_IRQ,
+ .start = 80,
+ .end = 111,
+ },
+};
+
+static struct resource vlynq_high_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_VLYNQ1,
+ .end = AR7_REGS_VLYNQ1 + 0xff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 33,
+ .end = 33,
+ },
+ {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ },
+ {
+ .name = "devirq",
+ .flags = IORESOURCE_IRQ,
+ .start = 112,
+ .end = 143,
+ },
+};
+
+static struct resource usb_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_USB,
+ .end = AR7_REGS_USB + 0xff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 32,
+ .end = 32,
+ },
+ {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x03400000,
+ .end = 0x034001fff,
+ },
+};
+
+static struct physmap_flash_data physmap_flash_data = {
+ .width = 2,
+};
+
+static struct plat_cpmac_data cpmac_low_data = {
+ .reset_bit = 17,
+ .power_bit = 20,
+ .phy_mask = 0x80000000,
+};
+
+static struct plat_cpmac_data cpmac_high_data = {
+ .reset_bit = 21,
+ .power_bit = 22,
+ .phy_mask = 0x7fffffff,
+};
+
+static struct plat_vlynq_data vlynq_low_data = {
+ .ops.on = vlynq_on,
+ .ops.off = vlynq_off,
+ .reset_bit = 20,
+ .gpio_bit = 18,
+};
+
+static struct plat_vlynq_data vlynq_high_data = {
+ .ops.on = vlynq_on,
+ .ops.off = vlynq_off,
+ .reset_bit = 16,
+ .gpio_bit = 19,
+};
+
+static struct platform_device physmap_flash = {
+ .id = 0,
+ .name = "physmap-flash",
+ .dev.platform_data = &physmap_flash_data,
+ .resource = &physmap_flash_resource,
+ .num_resources = 1,
+};
+
+static u64 cpmac_dma_mask = DMA_32BIT_MASK;
+static struct platform_device cpmac_low = {
+ .id = 0,
+ .name = "cpmac",
+ .dev = {
+ .dma_mask = &cpmac_dma_mask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ .platform_data = &cpmac_low_data,
+ },
+ .resource = cpmac_low_res,
+ .num_resources = ARRAY_SIZE(cpmac_low_res),
+};
+
+static struct platform_device cpmac_high = {
+ .id = 1,
+ .name = "cpmac",
+ .dev = {
+ .dma_mask = &cpmac_dma_mask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ .platform_data = &cpmac_high_data,
+ },
+ .resource = cpmac_high_res,
+ .num_resources = ARRAY_SIZE(cpmac_high_res),
+};
+
+static struct platform_device vlynq_low = {
+ .id = 0,
+ .name = "vlynq",
+ .dev.platform_data = &vlynq_low_data,
+ .resource = vlynq_low_res,
+ .num_resources = ARRAY_SIZE(vlynq_low_res),
+};
+
+static struct platform_device vlynq_high = {
+ .id = 1,
+ .name = "vlynq",
+ .dev.platform_data = &vlynq_high_data,
+ .resource = vlynq_high_res,
+ .num_resources = ARRAY_SIZE(vlynq_high_res),
+};
+
+
+static struct gpio_led default_leds[] = {
+ {
+ .name = "status",
+ .gpio = 8,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led dsl502t_leds[] = {
+ {
+ .name = "status",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "ethernet",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "usb",
+ .gpio = 12,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led dg834g_leds[] = {
+ {
+ .name = "ppp",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ {
+ .name = "status",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "adsl",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "wifi",
+ .gpio = 12,
+ .active_low = 1,
+ },
+ {
+ .name = "power",
+ .gpio = 14,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+};
+
+static struct gpio_led fb_sl_leds[] = {
+ {
+ .name = "1",
+ .gpio = 7,
+ },
+ {
+ .name = "2",
+ .gpio = 13,
+ .active_low = 1,
+ },
+ {
+ .name = "3",
+ .gpio = 10,
+ .active_low = 1,
+ },
+ {
+ .name = "4",
+ .gpio = 12,
+ .active_low = 1,
+ },
+ {
+ .name = "5",
+ .gpio = 9,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led fb_fon_leds[] = {
+ {
+ .name = "1",
+ .gpio = 8,
+ },
+ {
+ .name = "2",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "3",
+ .gpio = 5,
+ },
+ {
+ .name = "4",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "5",
+ .gpio = 11,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data ar7_led_data;
+
+static struct platform_device ar7_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ar7_led_data,
+ }
+};
+
+static struct platform_device ar7_udc = {
+ .id = -1,
+ .name = "ar7_udc",
+ .resource = usb_res,
+ .num_resources = ARRAY_SIZE(usb_res),
+};
+
+static inline unsigned char char2hex(char h)
+{
+ switch (h) {
+ case '0': case '1': case '2': case '3': case '4':
+ case '5': case '6': case '7': case '8': case '9':
+ return h - '0';
+ case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
+ return h - 'A' + 10;
+ case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
+ return h - 'a' + 10;
+ default:
+ return 0;
+ }
+}
+
+static void cpmac_get_mac(int instance, unsigned char *dev_addr)
+{
+ int i;
+ char name[5], default_mac[ETH_ALEN], *mac;
+
+ mac = NULL;
+ sprintf(name, "mac%c", 'a' + instance);
+ mac = prom_getenv(name);
+ if (!mac) {
+ sprintf(name, "mac%c", 'a');
+ mac = prom_getenv(name);
+ }
+ if (!mac) {
+ random_ether_addr(default_mac);
+ mac = default_mac;
+ }
+ for (i = 0; i < 6; i++)
+ dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
+ char2hex(mac[i * 3 + 1]);
+}
+
+static void __init detect_leds(void)
+{
+ char *prid, *usb_prod;
+
+ /* Default LEDs */
+ ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
+ ar7_led_data.leds = default_leds;
+
+ /* FIXME: the whole thing is unreliable */
+ prid = prom_getenv("ProductID");
+ usb_prod = prom_getenv("usb_prod");
+
+ /* If we can't get the product id from PROM, use the default LEDs */
+ if (!prid)
+ return;
+
+ if (strstr(prid, "Fritz_Box_FON")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds);
+ ar7_led_data.leds = fb_fon_leds;
+ } else if (strstr(prid, "Fritz_Box_")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds);
+ ar7_led_data.leds = fb_sl_leds;
+ } else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB"))
+ && usb_prod != NULL && strstr(usb_prod, "DSL-502T")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds);
+ ar7_led_data.leds = dsl502t_leds;
+ } else if (strstr(prid, "DG834")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
+ ar7_led_data.leds = dg834g_leds;
+ }
+}
+
+static int __init ar7_register_devices(void)
+{
+ int res;
+ static struct uart_port uart_port[2];
+
+ memset(uart_port, 0, sizeof(struct uart_port) * 2);
+
+ uart_port[0].type = PORT_16550A;
+ uart_port[0].line = 0;
+ uart_port[0].irq = AR7_IRQ_UART0;
+ uart_port[0].uartclk = ar7_bus_freq() / 2;
+ uart_port[0].iotype = UPIO_MEM32;
+ uart_port[0].mapbase = AR7_REGS_UART0;
+ uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
+ uart_port[0].regshift = 2;
+ res = early_serial_setup(&uart_port[0]);
+ if (res)
+ return res;
+
+
+ /* Only TNETD73xx have a second serial port */
+ if (ar7_has_second_uart()) {
+ uart_port[1].type = PORT_16550A;
+ uart_port[1].line = 1;
+ uart_port[1].irq = AR7_IRQ_UART1;
+ uart_port[1].uartclk = ar7_bus_freq() / 2;
+ uart_port[1].iotype = UPIO_MEM32;
+ uart_port[1].mapbase = UR8_REGS_UART1;
+ uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
+ uart_port[1].regshift = 2;
+ res = early_serial_setup(&uart_port[1]);
+ if (res)
+ return res;
+ }
+
+ res = platform_device_register(&physmap_flash);
+ if (res)
+ return res;
+
+ ar7_device_disable(vlynq_low_data.reset_bit);
+ res = platform_device_register(&vlynq_low);
+ if (res)
+ return res;
+
+ if (ar7_has_high_vlynq()) {
+ ar7_device_disable(vlynq_high_data.reset_bit);
+ res = platform_device_register(&vlynq_high);
+ if (res)
+ return res;
+ }
+
+ if (ar7_has_high_cpmac()) {
+ cpmac_get_mac(1, cpmac_high_data.dev_addr);
+ res = platform_device_register(&cpmac_high);
+ if (res)
+ return res;
+ } else {
+ cpmac_low_data.phy_mask = 0xffffffff;
+ }
+
+ cpmac_get_mac(0, cpmac_low_data.dev_addr);
+ res = platform_device_register(&cpmac_low);
+ if (res)
+ return res;
+
+ detect_leds();
+ res = platform_device_register(&ar7_gpio_leds);
+ if (res)
+ return res;
+
+ res = platform_device_register(&ar7_udc);
+
+ return res;
+}
+arch_initcall(ar7_register_devices);
diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c
new file mode 100644
index 000000000000..a320bceb2f9d
--- /dev/null
+++ b/arch/mips/ar7/prom.c
@@ -0,0 +1,297 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Putting things on the screen/serial line using YAMONs facilities.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <asm/bootinfo.h>
+
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/prom.h>
+
+#define MAX_ENTRY 80
+
+struct env_var {
+ char *name;
+ char *value;
+};
+
+static struct env_var adam2_env[MAX_ENTRY];
+
+char *prom_getenv(const char *name)
+{
+ int i;
+ for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++)
+ if (!strcmp(name, adam2_env[i].name))
+ return adam2_env[i].value;
+
+ return NULL;
+}
+EXPORT_SYMBOL(prom_getenv);
+
+char * __init prom_getcmdline(void)
+{
+ return &(arcs_cmdline[0]);
+}
+
+static void __init ar7_init_cmdline(int argc, char *argv[])
+{
+ char *cp;
+ int actr;
+
+ actr = 1; /* Always ignore argv[0] */
+
+ cp = &(arcs_cmdline[0]);
+ while (actr < argc) {
+ strcpy(cp, argv[actr]);
+ cp += strlen(argv[actr]);
+ *cp++ = ' ';
+ actr++;
+ }
+ if (cp != &(arcs_cmdline[0])) {
+ /* get rid of trailing space */
+ --cp;
+ *cp = '\0';
+ }
+}
+
+struct psbl_rec {
+ u32 psbl_size;
+ u32 env_base;
+ u32 env_size;
+ u32 ffs_base;
+ u32 ffs_size;
+};
+
+static __initdata char psp_env_version[] = "TIENV0.8";
+
+struct psp_env_chunk {
+ u8 num;
+ u8 ctrl;
+ u16 csum;
+ u8 len;
+ char data[11];
+} __attribute__ ((packed));
+
+struct psp_var_map_entry {
+ u8 num;
+ char *value;
+};
+
+static struct psp_var_map_entry psp_var_map[] = {
+ { 1, "cpufrequency" },
+ { 2, "memsize" },
+ { 3, "flashsize" },
+ { 4, "modetty0" },
+ { 5, "modetty1" },
+ { 8, "maca" },
+ { 9, "macb" },
+ { 28, "sysfrequency" },
+ { 38, "mipsfrequency" },
+};
+
+/*
+
+Well-known variable (num is looked up in table above for matching variable name)
+Example: cpufrequency=211968000
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Name=Value pair in a single chunk
+Example: NAME=VALUE
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Name=Value pair in 2 chunks (len is the number of chunks)
+Example: bootloaderVersion=1.3.7.15
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Data is padded with 0xFF
+
+*/
+
+#define PSP_ENV_SIZE 4096
+
+static char psp_env_data[PSP_ENV_SIZE] = { 0, };
+
+static char * __init lookup_psp_var_map(u8 num)
+{
+ int i;
+
+ for (i = 0; i < sizeof(psp_var_map); i++)
+ if (psp_var_map[i].num == num)
+ return psp_var_map[i].value;
+
+ return NULL;
+}
+
+static void __init add_adam2_var(char *name, char *value)
+{
+ int i;
+ for (i = 0; i < MAX_ENTRY; i++) {
+ if (!adam2_env[i].name) {
+ adam2_env[i].name = name;
+ adam2_env[i].value = value;
+ return;
+ } else if (!strcmp(adam2_env[i].name, name)) {
+ adam2_env[i].value = value;
+ return;
+ }
+ }
+}
+
+static int __init parse_psp_env(void *psp_env_base)
+{
+ int i, n;
+ char *name, *value;
+ struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data;
+
+ memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE);
+
+ i = 1;
+ n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk);
+ while (i < n) {
+ if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n))
+ break;
+ value = chunks[i].data;
+ if (chunks[i].num) {
+ name = lookup_psp_var_map(chunks[i].num);
+ } else {
+ name = value;
+ value += strlen(name) + 1;
+ }
+ if (name)
+ add_adam2_var(name, value);
+ i += chunks[i].len;
+ }
+ return 0;
+}
+
+static void __init ar7_init_env(struct env_var *env)
+{
+ int i;
+ struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300));
+ void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
+
+ if (strcmp(psp_env, psp_env_version) == 0) {
+ parse_psp_env(psp_env);
+ } else {
+ for (i = 0; i < MAX_ENTRY; i++, env++)
+ if (env->name)
+ add_adam2_var(env->name, env->value);
+ }
+}
+
+static void __init console_config(void)
+{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ char console_string[40];
+ int baud = 0;
+ char parity = '\0', bits = '\0', flow = '\0';
+ char *s, *p;
+
+ if (strstr(prom_getcmdline(), "console="))
+ return;
+
+#ifdef CONFIG_KGDB
+ if (!strstr(prom_getcmdline(), "nokgdb")) {
+ strcat(prom_getcmdline(), " console=kgdb");
+ kgdb_enabled = 1;
+ return;
+ }
+#endif
+
+ s = prom_getenv("modetty0");
+ if (s) {
+ baud = simple_strtoul(s, &p, 10);
+ s = p;
+ if (*s == ',')
+ s++;
+ if (*s)
+ parity = *s++;
+ if (*s == ',')
+ s++;
+ if (*s)
+ bits = *s++;
+ if (*s == ',')
+ s++;
+ if (*s == 'h')
+ flow = 'r';
+ }
+
+ if (baud == 0)
+ baud = 38400;
+ if (parity != 'n' && parity != 'o' && parity != 'e')
+ parity = 'n';
+ if (bits != '7' && bits != '8')
+ bits = '8';
+
+ if (flow == 'r')
+ sprintf(console_string, " console=ttyS0,%d%c%c%c", baud,
+ parity, bits, flow);
+ else
+ sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity,
+ bits);
+ strcat(prom_getcmdline(), console_string);
+#endif
+}
+
+void __init prom_init(void)
+{
+ ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
+ ar7_init_env((struct env_var *)fw_arg2);
+ console_config();
+}
+
+#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4)))
+static inline unsigned int serial_in(int offset)
+{
+ return readl((void *)PORT(offset));
+}
+
+static inline void serial_out(int offset, int value)
+{
+ writel(value, (void *)PORT(offset));
+}
+
+char prom_getchar(void)
+{
+ while (!(serial_in(UART_LSR) & UART_LSR_DR))
+ ;
+ return serial_in(UART_RX);
+}
+
+int prom_putchar(char c)
+{
+ while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0)
+ ;
+ serial_out(UART_TX, c);
+ return 1;
+}
+
diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c
new file mode 100644
index 000000000000..6ebb5f16d967
--- /dev/null
+++ b/arch/mips/ar7/setup.c
@@ -0,0 +1,94 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <linux/time.h>
+
+#include <asm/reboot.h>
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/prom.h>
+
+static void ar7_machine_restart(char *command)
+{
+ u32 *softres_reg = ioremap(AR7_REGS_RESET +
+ AR7_RESET_SOFTWARE, 1);
+ writel(1, softres_reg);
+}
+
+static void ar7_machine_halt(void)
+{
+ while (1)
+ ;
+}
+
+static void ar7_machine_power_off(void)
+{
+ u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
+ u32 power_state = readl(power_reg) | (3 << 30);
+ writel(power_state, power_reg);
+ ar7_machine_halt();
+}
+
+const char *get_system_type(void)
+{
+ u16 chip_id = ar7_chip_id();
+ switch (chip_id) {
+ case AR7_CHIP_7300:
+ return "TI AR7 (TNETD7300)";
+ case AR7_CHIP_7100:
+ return "TI AR7 (TNETD7100)";
+ case AR7_CHIP_7200:
+ return "TI AR7 (TNETD7200)";
+ default:
+ return "TI AR7 (Unknown)";
+ }
+}
+
+static int __init ar7_init_console(void)
+{
+ return 0;
+}
+console_initcall(ar7_init_console);
+
+/*
+ * Initializes basic routines and structures pointers, memory size (as
+ * given by the bios and saves the command line.
+ */
+
+void __init plat_mem_setup(void)
+{
+ unsigned long io_base;
+
+ _machine_restart = ar7_machine_restart;
+ _machine_halt = ar7_machine_halt;
+ pm_power_off = ar7_machine_power_off;
+ panic_timeout = 3;
+
+ io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000);
+ if (!io_base)
+ panic("Can't remap IO base!\n");
+ set_io_port_base(io_base);
+
+ prom_meminit();
+
+ printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n",
+ get_system_type(),
+ ar7_chip_id(), ar7_chip_rev());
+}
diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c
new file mode 100644
index 000000000000..a1fba894daa2
--- /dev/null
+++ b/arch/mips/ar7/time.c
@@ -0,0 +1,30 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/init.h>
+#include <linux/time.h>
+
+#include <asm/time.h>
+#include <asm/mach-ar7/ar7.h>
+
+void __init plat_time_init(void)
+{
+ mips_hpt_frequency = ar7_cpu_freq() / 2;
+}
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 7c0528b0e34c..d6903c3f3d51 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -14,9 +14,5 @@ obj-y += dma-octeon.o flash_setup.o
obj-y += octeon-memcpy.o
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_PCI) += pci-common.o
-obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_PCI) += pcie.o
-obj-$(CONFIG_PCI_MSI) += msi.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 627c162a6159..4b92bfc662db 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -29,7 +29,7 @@
#include <dma-coherence.h>
#ifdef CONFIG_PCI
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
#endif
#define BAR2_PCI_ADDRESS 0x8000000000ul
diff --git a/arch/mips/cavium-octeon/pci-common.c b/arch/mips/cavium-octeon/pci-common.c
deleted file mode 100644
index cd029f88da7f..000000000000
--- a/arch/mips/cavium-octeon/pci-common.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2007 Cavium Networks
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include "pci-common.h"
-
-typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
-enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
-
-/**
- * Map a PCI device to the appropriate interrupt line
- *
- * @param dev The Linux PCI device structure for the device to map
- * @param slot The slot number for this device on __BUS 0__. Linux
- * enumerates through all the bridges and figures out the
- * slot on Bus 0 where this device eventually hooks to.
- * @param pin The PCI interrupt pin read from the device, then swizzled
- * as it goes through each bridge.
- * @return Interrupt number for the device
- */
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- if (octeon_pcibios_map_irq)
- return octeon_pcibios_map_irq(dev, slot, pin);
- else
- panic("octeon_pcibios_map_irq doesn't point to a "
- "pcibios_map_irq() function");
-}
-
-
-/**
- * Called to perform platform specific PCI setup
- *
- * @param dev
- * @return
- */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- uint16_t config;
- uint32_t dconfig;
- int pos;
- /*
- * Force the Cache line setting to 64 bytes. The standard
- * Linux bus scan doesn't seem to set it. Octeon really has
- * 128 byte lines, but Intel bridges get really upset if you
- * try and set values above 64 bytes. Value is specified in
- * 32bit words.
- */
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
- /* Set latency timers for all devices */
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
-
- /* Enable reporting System errors and parity errors on all devices */
- /* Enable parity checking and error reporting */
- pci_read_config_word(dev, PCI_COMMAND, &config);
- config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
- pci_write_config_word(dev, PCI_COMMAND, config);
-
- if (dev->subordinate) {
- /* Set latency timers on sub bridges */
- pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
- /* More bridge error detection */
- pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
- config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
- pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
- }
-
- /* Enable the PCIe normal error reporting */
- pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
- if (pos) {
- /* Update Device Control */
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
- /* Correctable Error Reporting */
- config |= PCI_EXP_DEVCTL_CERE;
- /* Non-Fatal Error Reporting */
- config |= PCI_EXP_DEVCTL_NFERE;
- /* Fatal Error Reporting */
- config |= PCI_EXP_DEVCTL_FERE;
- /* Unsupported Request */
- config |= PCI_EXP_DEVCTL_URRE;
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
- }
-
- /* Find the Advanced Error Reporting capability */
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
- if (pos) {
- /* Clear Uncorrectable Error Status */
- pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
- &dconfig);
- pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
- dconfig);
- /* Enable reporting of all uncorrectable errors */
- /* Uncorrectable Error Mask - turned on bits disable errors */
- pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
- /*
- * Leave severity at HW default. This only controls if
- * errors are reported as uncorrectable or
- * correctable, not if the error is reported.
- */
- /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
- /* Clear Correctable Error Status */
- pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
- pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
- /* Enable reporting of all correctable errors */
- /* Correctable Error Mask - turned on bits disable errors */
- pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
- /* Advanced Error Capabilities */
- pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
- /* ECRC Generation Enable */
- if (config & PCI_ERR_CAP_ECRC_GENC)
- config |= PCI_ERR_CAP_ECRC_GENE;
- /* ECRC Check Enable */
- if (config & PCI_ERR_CAP_ECRC_CHKC)
- config |= PCI_ERR_CAP_ECRC_CHKE;
- pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
- /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
- /* Report all errors to the root complex */
- pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
- PCI_ERR_ROOT_CMD_COR_EN |
- PCI_ERR_ROOT_CMD_NONFATAL_EN |
- PCI_ERR_ROOT_CMD_FATAL_EN);
- /* Clear the Root status register */
- pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
- pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
- }
-
- return 0;
-}
diff --git a/arch/mips/cobalt/buttons.c b/arch/mips/cobalt/buttons.c
index 9e143989c7b8..4eaec8b46e0c 100644
--- a/arch/mips/cobalt/buttons.c
+++ b/arch/mips/cobalt/buttons.c
@@ -1,7 +1,7 @@
/*
* Cobalt buttons platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/lcd.c b/arch/mips/cobalt/lcd.c
index 0720e4fae311..0f1cd90f37ed 100644
--- a/arch/mips/cobalt/lcd.c
+++ b/arch/mips/cobalt/lcd.c
@@ -1,7 +1,7 @@
/*
* Registration of Cobalt LCD platform device.
*
- * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/led.c b/arch/mips/cobalt/led.c
index 1c6ebd468b07..d3ce6fa1dc74 100644
--- a/arch/mips/cobalt/led.c
+++ b/arch/mips/cobalt/led.c
@@ -1,7 +1,7 @@
/*
* Registration of Cobalt LED platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c
index 2b088ef3839a..691d620b6766 100644
--- a/arch/mips/cobalt/mtd.c
+++ b/arch/mips/cobalt/mtd.c
@@ -1,7 +1,7 @@
/*
* Registration of Cobalt MTD device.
*
- * Copyright (C) 2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/rtc.c b/arch/mips/cobalt/rtc.c
index e70794b8bcba..3ab39898b4e4 100644
--- a/arch/mips/cobalt/rtc.c
+++ b/arch/mips/cobalt/rtc.c
@@ -1,7 +1,7 @@
/*
* Registration of Cobalt RTC platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/serial.c b/arch/mips/cobalt/serial.c
index 53b8d0d6da90..7cb51f57275e 100644
--- a/arch/mips/cobalt/serial.c
+++ b/arch/mips/cobalt/serial.c
@@ -1,7 +1,7 @@
/*
* Registration of Cobalt UART platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/time.c b/arch/mips/cobalt/time.c
index 4a570e7145fe..0162f9edc693 100644
--- a/arch/mips/cobalt/time.c
+++ b/arch/mips/cobalt/time.c
@@ -1,7 +1,7 @@
/*
* Cobalt time initialization.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
new file mode 100644
index 000000000000..dad5b6769d74
--- /dev/null
+++ b/arch/mips/configs/ar7_defconfig
@@ -0,0 +1,1182 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jun 24 14:08:59 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+CONFIG_AR7=y
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_NO_EXCEPT_FILL=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_KEXEC=y
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_PROBE_INITRD_HEADER=y
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+# CONFIG_ATM_CLIP is not set
+# CONFIG_ATM_LANE is not set
+CONFIG_ATM_BR2684=m
+CONFIG_ATM_BR2684_IPFILTER=y
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+# CONFIG_AX25 is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_DEFAULT_PS=y
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_IFB is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_CPMAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AR7_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_SERIAL=y
+CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_EMBEDDED=y
+CONFIG_SSB_DRIVER_EXTIF=y
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_VLYNQ=y
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/gt64120/wrppmc/serial.c b/arch/mips/gt64120/wrppmc/serial.c
index 5ec1c2ffd3a5..6f9d0858f596 100644
--- a/arch/mips/gt64120/wrppmc/serial.c
+++ b/arch/mips/gt64120/wrppmc/serial.c
@@ -1,7 +1,7 @@
/*
* Registration of WRPPMC UART platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/amon.h b/arch/mips/include/asm/amon.h
new file mode 100644
index 000000000000..c3dc1a68dd8d
--- /dev/null
+++ b/arch/mips/include/asm/amon.h
@@ -0,0 +1,7 @@
+/*
+ * Amon support
+ */
+
+int amon_cpu_avail(int);
+void amon_cpu_start(int, unsigned long, unsigned long,
+ unsigned long, unsigned long);
diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h
index ba1702e86931..3af0b8fb3b8c 100644
--- a/arch/mips/include/asm/ds1287.h
+++ b/arch/mips/include/asm/ds1287.h
@@ -1,7 +1,7 @@
/*
* DS1287 timer functions.
*
- * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index d58f128aa747..7990694cda22 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -316,9 +316,13 @@ extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs);
extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
+#ifndef ELF_CORE_COPY_REGS
#define ELF_CORE_COPY_REGS(elf_regs, regs) \
elf_dump_regs((elf_greg_t *)&(elf_regs), regs);
+#endif
+#ifndef ELF_CORE_COPY_TASK_REGS
#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#endif
#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \
dump_task_fpu(tsk, elf_fpregs)
diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h
index d74a8a4ca861..36fd969d64d6 100644
--- a/arch/mips/include/asm/gcmpregs.h
+++ b/arch/mips/include/asm/gcmpregs.h
@@ -114,4 +114,6 @@
#define GCMP_CCB_DINTGROUP_OFS 0x0030 /* DINT Group Participate */
#define GCMP_CCB_DBGGROUP_OFS 0x0100 /* DebugBreak Group */
+extern int __init gcmp_probe(unsigned long, unsigned long);
+
#endif /* _ASM_GCMPREGS_H */
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index 954807d9d66a..10292e37c1f7 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -20,7 +20,11 @@
#define GIC_TRIG_EDGE 1
#define GIC_TRIG_LEVEL 0
+#if CONFIG_SMP
+#define GIC_NUM_INTRS (24 + NR_CPUS * 2)
+#else
#define GIC_NUM_INTRS 32
+#endif
#define MSK(n) ((1 << (n)) - 1)
#define REG32(addr) (*(volatile unsigned int *) (addr))
@@ -483,5 +487,7 @@ extern void gic_init(unsigned long gic_base_addr,
extern unsigned int gic_get_int(void);
extern void gic_send_ipi(unsigned int intr);
+extern unsigned int plat_ipi_call_int_xlate(unsigned int);
+extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
#endif /* _ASM_GICREGS_H */
diff --git a/arch/mips/include/asm/irq_gt641xx.h b/arch/mips/include/asm/irq_gt641xx.h
index f9a7c3ac2e66..250a2407b599 100644
--- a/arch/mips/include/asm/irq_gt641xx.h
+++ b/arch/mips/include/asm/irq_gt641xx.h
@@ -1,7 +1,7 @@
/*
* Galileo/Marvell GT641xx IRQ definitions.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
new file mode 100644
index 000000000000..de71694614de
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __AR7_H__
+#define __AR7_H__
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+
+#include <asm/addrspace.h>
+
+#define AR7_SDRAM_BASE 0x14000000
+
+#define AR7_REGS_BASE 0x08610000
+
+#define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000)
+#define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900)
+/* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */
+#define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00)
+#define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80)
+#define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20)
+#define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00)
+#define AR7_REGS_USB (AR7_REGS_BASE + 0x1200)
+#define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600)
+#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800)
+#define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00)
+#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00)
+#define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00)
+#define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400)
+#define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800)
+
+#define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00)
+#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00)
+#define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00)
+
+#define AR7_RESET_PEREPHERIAL 0x0
+#define AR7_RESET_SOFTWARE 0x4
+#define AR7_RESET_STATUS 0x8
+
+#define AR7_RESET_BIT_CPMAC_LO 17
+#define AR7_RESET_BIT_CPMAC_HI 21
+#define AR7_RESET_BIT_MDIO 22
+#define AR7_RESET_BIT_EPHY 26
+
+/* GPIO control registers */
+#define AR7_GPIO_INPUT 0x0
+#define AR7_GPIO_OUTPUT 0x4
+#define AR7_GPIO_DIR 0x8
+#define AR7_GPIO_ENABLE 0xc
+
+#define AR7_CHIP_7100 0x18
+#define AR7_CHIP_7200 0x2b
+#define AR7_CHIP_7300 0x05
+
+/* Interrupts */
+#define AR7_IRQ_UART0 15
+#define AR7_IRQ_UART1 16
+
+/* Clocks */
+#define AR7_AFE_CLOCK 35328000
+#define AR7_REF_CLOCK 25000000
+#define AR7_XTAL_CLOCK 24000000
+
+struct plat_cpmac_data {
+ int reset_bit;
+ int power_bit;
+ u32 phy_mask;
+ char dev_addr[6];
+};
+
+struct plat_dsl_data {
+ int reset_bit_dsl;
+ int reset_bit_sar;
+};
+
+extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock;
+
+static inline u16 ar7_chip_id(void)
+{
+ return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff;
+}
+
+static inline u8 ar7_chip_rev(void)
+{
+ return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff;
+}
+
+static inline int ar7_cpu_freq(void)
+{
+ return ar7_cpu_clock;
+}
+
+static inline int ar7_bus_freq(void)
+{
+ return ar7_bus_clock;
+}
+
+static inline int ar7_vbus_freq(void)
+{
+ return ar7_bus_clock / 2;
+}
+#define ar7_cpmac_freq ar7_vbus_freq
+
+static inline int ar7_dsp_freq(void)
+{
+ return ar7_dsp_clock;
+}
+
+static inline int ar7_has_high_cpmac(void)
+{
+ u16 chip_id = ar7_chip_id();
+ switch (chip_id) {
+ case AR7_CHIP_7100:
+ case AR7_CHIP_7200:
+ return 0;
+ case AR7_CHIP_7300:
+ return 1;
+ default:
+ return -ENXIO;
+ }
+}
+#define ar7_has_high_vlynq ar7_has_high_cpmac
+#define ar7_has_second_uart ar7_has_high_cpmac
+
+static inline void ar7_device_enable(u32 bit)
+{
+ void *reset_reg =
+ (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+ writel(readl(reset_reg) | (1 << bit), reset_reg);
+ msleep(20);
+}
+
+static inline void ar7_device_disable(u32 bit)
+{
+ void *reset_reg =
+ (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+ writel(readl(reset_reg) & ~(1 << bit), reset_reg);
+ msleep(20);
+}
+
+static inline void ar7_device_reset(u32 bit)
+{
+ ar7_device_disable(bit);
+ ar7_device_enable(bit);
+}
+
+static inline void ar7_device_on(u32 bit)
+{
+ void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+ writel(readl(power_reg) | (1 << bit), power_reg);
+ msleep(20);
+}
+
+static inline void ar7_device_off(u32 bit)
+{
+ void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+ writel(readl(power_reg) & ~(1 << bit), power_reg);
+ msleep(20);
+}
+
+#endif /* __AR7_H__ */
diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h
new file mode 100644
index 000000000000..cbe9c4f126df
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/gpio.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __AR7_GPIO_H__
+#define __AR7_GPIO_H__
+
+#include <asm/mach-ar7/ar7.h>
+
+#define AR7_GPIO_MAX 32
+
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+
+/* Common GPIO layer */
+static inline int gpio_get_value(unsigned gpio)
+{
+ void __iomem *gpio_in =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT);
+
+ return readl(gpio_in) & (1 << gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ void __iomem *gpio_out =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT);
+ unsigned tmp;
+
+ tmp = readl(gpio_out) & ~(1 << gpio);
+ if (value)
+ tmp |= 1 << gpio;
+ writel(tmp, gpio_out);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ void __iomem *gpio_dir =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
+
+ if (gpio >= AR7_GPIO_MAX)
+ return -EINVAL;
+
+ writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
+
+ return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ void __iomem *gpio_dir =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
+
+ if (gpio >= AR7_GPIO_MAX)
+ return -EINVAL;
+
+ gpio_set_value(gpio, value);
+ writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
+
+ return 0;
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return -EINVAL;
+}
+
+/* Board specific GPIO functions */
+static inline int ar7_gpio_enable(unsigned gpio)
+{
+ void __iomem *gpio_en =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
+
+ writel(readl(gpio_en) | (1 << gpio), gpio_en);
+
+ return 0;
+}
+
+static inline int ar7_gpio_disable(unsigned gpio)
+{
+ void __iomem *gpio_en =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
+
+ writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
+
+ return 0;
+}
+
+#include <asm-generic/gpio.h>
+
+#endif
diff --git a/arch/mips/include/asm/mach-ar7/irq.h b/arch/mips/include/asm/mach-ar7/irq.h
new file mode 100644
index 000000000000..39e9757e3d93
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/irq.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Shamelessly copied from asm-mips/mach-emma2rh/
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_AR7_IRQ_H
+#define __ASM_AR7_IRQ_H
+
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif /* __ASM_AR7_IRQ_H */
diff --git a/arch/mips/include/asm/mach-ar7/prom.h b/arch/mips/include/asm/mach-ar7/prom.h
new file mode 100644
index 000000000000..088f61fe85ea
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/prom.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2006, 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __PROM_H__
+#define __PROM_H__
+
+extern char *prom_getenv(const char *name);
+extern void prom_meminit(void);
+
+#endif /* __PROM_H__ */
diff --git a/arch/mips/include/asm/mach-ar7/spaces.h b/arch/mips/include/asm/mach-ar7/spaces.h
new file mode 100644
index 000000000000..ac28f273449c
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/spaces.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002 Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_AR7_SPACES_H
+#define _ASM_AR7_SPACES_H
+
+/*
+ * This handles the memory map.
+ * We handle pages at KSEG0 for kernels with 32 bit address space.
+ */
+#define PAGE_OFFSET 0x94000000UL
+#define PHYS_OFFSET 0x14000000UL
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* __ASM_AR7_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ar7/war.h b/arch/mips/include/asm/mach-ar7/war.h
new file mode 100644
index 000000000000..f4862b563080
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_AR7_WAR_H
+#define __ASM_MIPS_MACH_AR7_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_AR7_WAR_H */
diff --git a/arch/mips/include/asm/mach-cobalt/irq.h b/arch/mips/include/asm/mach-cobalt/irq.h
index 57c8c9ac5851..9da9acf5dcba 100644
--- a/arch/mips/include/asm/mach-cobalt/irq.h
+++ b/arch/mips/include/asm/mach-cobalt/irq.h
@@ -8,7 +8,7 @@
* Copyright (C) 1997 Cobalt Microserver
* Copyright (C) 1997, 2003 Ralf Baechle
* Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv)
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*/
#ifndef _ASM_COBALT_IRQ_H
#define _ASM_COBALT_IRQ_H
diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
index ae9c5523c7ef..f8afec3f2943 100644
--- a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
+++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cavium-octeon/pci-common.h b/arch/mips/include/asm/octeon/pci-octeon.h
index 74ae79991e45..6ac5d3e3398e 100644
--- a/arch/mips/cavium-octeon/pci-common.h
+++ b/arch/mips/include/asm/octeon/pci-octeon.h
@@ -3,23 +3,29 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2005-2007 Cavium Networks
+ * Copyright (C) 2005-2009 Cavium Networks
*/
-#ifndef __OCTEON_PCI_COMMON_H__
-#define __OCTEON_PCI_COMMON_H__
+
+#ifndef __PCI_OCTEON_H__
+#define __PCI_OCTEON_H__
#include <linux/pci.h>
/* Some PCI cards require delays when accessing config space. */
#define PCI_CONFIG_SPACE_DELAY 10000
-/* pcibios_map_irq() is defined inside pci-common.c. All it does is call the
- Octeon specific version pointed to by this variable. This function needs to
- change for PCI or PCIe based hosts */
-extern typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
+/*
+ * pcibios_map_irq() is defined inside pci-octeon.c. All it does is
+ * call the Octeon specific version pointed to by this variable. This
+ * function needs to change for PCI or PCIe based hosts.
+ */
+extern int (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
+ u8 slot, u8 pin);
-/* The following defines are only used when octeon_dma_bar_type =
- OCTEON_DMA_BAR_TYPE_BIG */
+/*
+ * The following defines are used when octeon_dma_bar_type =
+ * OCTEON_DMA_BAR_TYPE_BIG
+ */
#define OCTEON_PCI_BAR1_HOLE_BITS 5
#define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3))
@@ -30,9 +36,9 @@ enum octeon_dma_bar_type {
OCTEON_DMA_BAR_TYPE_PCIE
};
-/**
- * This is a variable to tell the DMA mapping system in dma-octeon.c
- * how to map PCI DMA addresses.
+/*
+ * This tells the DMA mapping system in dma-octeon.c how to map PCI
+ * DMA addresses.
*/
extern enum octeon_dma_bar_type octeon_dma_bar_type;
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index dc0eaa731281..96a14a426a7c 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -165,7 +165,14 @@ typedef struct { unsigned long pgprot; } pgprot_t;
#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
+#define pfn_valid(pfn) \
+({ \
+ unsigned long __pfn = (pfn); \
+ /* avoid <linux/bootmem.h> include hell */ \
+ extern unsigned long min_low_pfn; \
+ \
+ __pfn >= min_low_pfn && __pfn < max_mapnr; \
+})
#elif defined(CONFIG_SPARSEMEM)
diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h
index 634b55d7e7f6..910e71a12466 100644
--- a/arch/mips/include/asm/reg.h
+++ b/arch/mips/include/asm/reg.h
@@ -69,7 +69,7 @@
#endif
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) && !defined(WANT_COMPAT_REG_H)
#define EF_R0 0
#define EF_R1 1
diff --git a/arch/mips/include/asm/swab.h b/arch/mips/include/asm/swab.h
index 99993c0d6c12..97c2f81b4b43 100644
--- a/arch/mips/include/asm/swab.h
+++ b/arch/mips/include/asm/swab.h
@@ -38,7 +38,11 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
}
#define __arch_swab32 __arch_swab32
-#ifdef CONFIG_CPU_MIPS64_R2
+/*
+ * Having already checked for CONFIG_CPU_MIPSR2, enable the
+ * optimized version for 64-bit kernel on r2 CPUs.
+ */
+#ifdef CONFIG_64BIT
static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
{
__asm__(
@@ -50,6 +54,6 @@ static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
return x;
}
#define __arch_swab64 __arch_swab64
-#endif /* CONFIG_CPU_MIPS64_R2 */
+#endif /* CONFIG_64BIT */
#endif /* CONFIG_CPU_MIPSR2 */
#endif /* _ASM_SWAB_H */
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 143a48136a4b..f9df720d2e40 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -39,8 +39,6 @@ struct thread_info {
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#define INIT_THREAD_INFO(tsk) \
{ \
@@ -48,7 +46,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = _TIF_FIXADE, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 40005010827c..b70c49fdda26 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -352,16 +352,18 @@
#define __NR_inotify_init1 (__NR_Linux + 329)
#define __NR_preadv (__NR_Linux + 330)
#define __NR_pwritev (__NR_Linux + 331)
+#define __NR_rt_tgsigqueueinfo (__NR_Linux + 332)
+#define __NR_perf_counter_open (__NR_Linux + 333)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 331
+#define __NR_Linux_syscalls 333
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 331
+#define __NR_O32_Linux_syscalls 333
#if _MIPS_SIM == _MIPS_SIM_ABI64
@@ -660,16 +662,18 @@
#define __NR_inotify_init1 (__NR_Linux + 288)
#define __NR_preadv (__NR_Linux + 289)
#define __NR_pwritev (__NR_Linux + 290)
+#define __NR_rt_tgsigqueueinfo (__NR_Linux + 291)
+#define __NR_perf_counter_open (__NR_Linux + 292)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 290
+#define __NR_Linux_syscalls 292
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 290
+#define __NR_64_Linux_syscalls 292
#if _MIPS_SIM == _MIPS_SIM_NABI32
@@ -972,16 +976,18 @@
#define __NR_inotify_init1 (__NR_Linux + 292)
#define __NR_preadv (__NR_Linux + 293)
#define __NR_pwritev (__NR_Linux + 294)
+#define __NR_rt_tgsigqueueinfo (__NR_Linux + 295)
+#define __NR_perf_counter_open (__NR_Linux + 296)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 294
+#define __NR_Linux_syscalls 296
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 294
+#define __NR_N32_Linux_syscalls 296
#ifdef __KERNEL__
diff --git a/arch/mips/include/asm/vr41xx/capcella.h b/arch/mips/include/asm/vr41xx/capcella.h
index e0ee05a3dfcc..fcc6569414fa 100644
--- a/arch/mips/include/asm/vr41xx/capcella.h
+++ b/arch/mips/include/asm/vr41xx/capcella.h
@@ -1,7 +1,7 @@
/*
* capcella.h, Include file for ZAO Networks Capcella.
*
- * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h
index 0bcdd3a5c256..6a90bc1d916b 100644
--- a/arch/mips/include/asm/vr41xx/giu.h
+++ b/arch/mips/include/asm/vr41xx/giu.h
@@ -1,7 +1,7 @@
/*
* Include file for NEC VR4100 series General-purpose I/O Unit.
*
- * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005-2009 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -41,7 +41,8 @@ typedef enum {
IRQ_SIGNAL_HOLD,
} irq_signal_t;
-extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal);
+extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger,
+ irq_signal_t signal);
typedef enum {
IRQ_LEVEL_LOW,
@@ -51,23 +52,6 @@ typedef enum {
extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level);
typedef enum {
- GPIO_DATA_LOW,
- GPIO_DATA_HIGH,
- GPIO_DATA_INVAL,
-} gpio_data_t;
-
-extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin);
-extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data);
-
-typedef enum {
- GPIO_INPUT,
- GPIO_OUTPUT,
- GPIO_OUTPUT_DISABLE,
-} gpio_direction_t;
-
-extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir);
-
-typedef enum {
GPIO_PULL_DOWN,
GPIO_PULL_UP,
GPIO_PULL_DISABLE,
diff --git a/arch/mips/include/asm/vr41xx/irq.h b/arch/mips/include/asm/vr41xx/irq.h
index d315dfbc08f2..b07f7321751d 100644
--- a/arch/mips/include/asm/vr41xx/irq.h
+++ b/arch/mips/include/asm/vr41xx/irq.h
@@ -7,7 +7,7 @@
* Copyright (C) 2001, 2002 Paul Mundt
* Copyright (C) 2002 MontaVista Software, Inc.
* Copyright (C) 2002 TimeSys Corp.
- * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/include/asm/vr41xx/mpc30x.h b/arch/mips/include/asm/vr41xx/mpc30x.h
index 1d67df843dc3..130d09d8c8cb 100644
--- a/arch/mips/include/asm/vr41xx/mpc30x.h
+++ b/arch/mips/include/asm/vr41xx/mpc30x.h
@@ -1,7 +1,7 @@
/*
* mpc30x.h, Include file for Victor MP-C303/304.
*
- * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h
index 6fc01ce19777..c231a3d6cfd8 100644
--- a/arch/mips/include/asm/vr41xx/pci.h
+++ b/arch/mips/include/asm/vr41xx/pci.h
@@ -1,7 +1,7 @@
/*
* Include file for NEC VR4100 series PCI Control Unit.
*
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/siu.h b/arch/mips/include/asm/vr41xx/siu.h
index da9f6e373409..ca806bc4ddc8 100644
--- a/arch/mips/include/asm/vr41xx/siu.h
+++ b/arch/mips/include/asm/vr41xx/siu.h
@@ -1,7 +1,7 @@
/*
* Include file for NEC VR4100 series Serial Interface Unit.
*
- * Copyright (C) 2005-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/tb0219.h b/arch/mips/include/asm/vr41xx/tb0219.h
index dc981b4be0a4..c78e8243b447 100644
--- a/arch/mips/include/asm/vr41xx/tb0219.h
+++ b/arch/mips/include/asm/vr41xx/tb0219.h
@@ -1,7 +1,7 @@
/*
* tb0219.h, Include file for TANBAC TB0219.
*
- * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* Modified for TANBAC TB0219:
* Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp>
diff --git a/arch/mips/include/asm/vr41xx/tb0226.h b/arch/mips/include/asm/vr41xx/tb0226.h
index de527dcfa5f3..36f5f798e416 100644
--- a/arch/mips/include/asm/vr41xx/tb0226.h
+++ b/arch/mips/include/asm/vr41xx/tb0226.h
@@ -1,7 +1,7 @@
/*
* tb0226.h, Include file for TANBAC TB0226.
*
- * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/vr41xx.h b/arch/mips/include/asm/vr41xx/vr41xx.h
index 22be64971cc6..7b96a43b72ba 100644
--- a/arch/mips/include/asm/vr41xx/vr41xx.h
+++ b/arch/mips/include/asm/vr41xx/vr41xx.h
@@ -7,7 +7,7 @@
* Copyright (C) 2001, 2002 Paul Mundt
* Copyright (C) 2002 MontaVista Software, Inc.
* Copyright (C) 2002 TimeSys Corp.
- * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index e1333d7319e2..ff448233dab5 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -53,6 +53,23 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
#define ELF_ET_DYN_BASE (TASK32_SIZE / 3 * 2)
#include <asm/processor.h>
+
+/*
+ * When this file is selected, we are definitely running a 64bit kernel.
+ * So using the right regs define in asm/reg.h
+ */
+#define WANT_COMPAT_REG_H
+
+/* These MUST be defined before elf.h gets included */
+extern void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs);
+#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
+#define ELF_CORE_COPY_TASK_REGS(_tsk, _dest) \
+({ \
+ int __res = 1; \
+ elf32_core_copy_regs(*(_dest), task_pt_regs(_tsk)); \
+ __res; \
+})
+
#include <linux/module.h>
#include <linux/elfcore.h>
#include <linux/compat.h>
@@ -110,9 +127,6 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
value->tv_usec = rem / NSEC_PER_USEC;
}
-#undef ELF_CORE_COPY_REGS
-#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
-
void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs)
{
int i;
diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c
index 1ada45ea0700..6996da4d74a2 100644
--- a/arch/mips/kernel/cevt-ds1287.c
+++ b/arch/mips/kernel/cevt-ds1287.c
@@ -1,7 +1,7 @@
/*
* DS1287 clockevent driver
*
- * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c
index e9b787feedcb..92351e00ae0e 100644
--- a/arch/mips/kernel/cevt-gt641xx.c
+++ b/arch/mips/kernel/cevt-gt641xx.c
@@ -1,7 +1,7 @@
/*
* GT641xx clockevent routines.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index b551f48d3a07..23da108506b0 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -1,7 +1,7 @@
/*
* DEC I/O ASIC's counter clocksource
*
- * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
index 39000f103f2c..d2072cd38592 100644
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -107,9 +107,7 @@ static unsigned int gic_irq_startup(unsigned int irq)
{
pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
- GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
- 1 << (irq % 32));
+ GIC_SET_INTR_MASK(irq, 1);
return 0;
}
@@ -120,8 +118,7 @@ static void gic_irq_ack(unsigned int irq)
#endif
pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
- 1 << (irq % 32));
+ GIC_CLR_INTR_MASK(irq, 1);
if (_intrmap[irq].trigtype == GIC_TRIG_EDGE) {
if (!gic_wedgeb2bok)
@@ -138,18 +135,14 @@ static void gic_mask_irq(unsigned int irq)
{
pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
- GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
- 1 << (irq % 32));
+ GIC_CLR_INTR_MASK(irq, 1);
}
static void gic_unmask_irq(unsigned int irq)
{
pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
- GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
- 1 << (irq % 32));
+ GIC_SET_INTR_MASK(irq, 1);
}
#ifdef CONFIG_SMP
@@ -254,6 +247,10 @@ static void __init gic_basic_init(void)
if (cpu == X)
continue;
+ if (cpu == 0 && i != 0 && _intrmap[i].intrnum == 0 &&
+ _intrmap[i].ipiflag == 0)
+ continue;
+
setup_intr(_intrmap[i].intrnum,
_intrmap[i].cpunum,
_intrmap[i].pin,
diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c
index 1b81b131f43c..ebcc5f7ad9c2 100644
--- a/arch/mips/kernel/irq-gt641xx.c
+++ b/arch/mips/kernel/irq-gt641xx.c
@@ -1,7 +1,7 @@
/*
* GT641xx IRQ routines.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 0b31b9bda048..20a86e08fd58 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -652,6 +652,8 @@ einval: li v0, -ENOSYS
sys sys_inotify_init1 1
sys sys_preadv 6 /* 4330 */
sys sys_pwritev 6
+ sys sys_rt_tgsigqueueinfo 4
+ sys sys_perf_counter_open 5
.endm
/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index c647fd6e722f..b046130d4c5d 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -489,4 +489,6 @@ sys_call_table:
PTR sys_inotify_init1
PTR sys_preadv
PTR sys_pwritev /* 5390 */
+ PTR sys_rt_tgsigqueueinfo
+ PTR sys_perf_counter_open
.size sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 93cc672f4522..15874f9812cc 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -415,4 +415,6 @@ EXPORT(sysn32_call_table)
PTR sys_inotify_init1
PTR sys_preadv
PTR sys_pwritev
+ PTR compat_sys_rt_tgsigqueueinfo /* 5295 */
+ PTR sys_perf_counter_open
.size sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index a5598b2339dd..781e0f1e9533 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -535,4 +535,6 @@ sys_call_table:
PTR sys_inotify_init1
PTR compat_sys_preadv /* 4330 */
PTR compat_sys_pwritev
+ PTR compat_sys_rt_tgsigqueueinfo
+ PTR sys_perf_counter_open
.size sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index 653be061b9ec..ad0ff5dc4d59 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -37,80 +37,24 @@
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/mips_mt.h>
-
-/*
- * Crude manipulation of the CPU masks to control which
- * which CPU's are brought online during initialisation
- *
- * Beware... this needs to be called after CPU discovery
- * but before CPU bringup
- */
-static int __init allowcpus(char *str)
-{
- cpumask_t cpu_allow_map;
- char buf[256];
- int len;
-
- cpus_clear(cpu_allow_map);
- if (cpulist_parse(str, &cpu_allow_map) == 0) {
- cpu_set(0, cpu_allow_map);
- cpus_and(cpu_possible_map, cpu_possible_map, cpu_allow_map);
- len = cpulist_scnprintf(buf, sizeof(buf)-1, &cpu_possible_map);
- buf[len] = '\0';
- pr_debug("Allowable CPUs: %s\n", buf);
- return 1;
- } else
- return 0;
-}
-__setup("allowcpus=", allowcpus);
+#include <asm/amon.h>
+#include <asm/gic.h>
static void ipi_call_function(unsigned int cpu)
{
- unsigned int action = 0;
-
pr_debug("CPU%d: %s cpu %d status %08x\n",
smp_processor_id(), __func__, cpu, read_c0_status());
- switch (cpu) {
- case 0:
- action = GIC_IPI_EXT_INTR_CALLFNC_VPE0;
- break;
- case 1:
- action = GIC_IPI_EXT_INTR_CALLFNC_VPE1;
- break;
- case 2:
- action = GIC_IPI_EXT_INTR_CALLFNC_VPE2;
- break;
- case 3:
- action = GIC_IPI_EXT_INTR_CALLFNC_VPE3;
- break;
- }
- gic_send_ipi(action);
+ gic_send_ipi(plat_ipi_call_int_xlate(cpu));
}
static void ipi_resched(unsigned int cpu)
{
- unsigned int action = 0;
-
pr_debug("CPU%d: %s cpu %d status %08x\n",
smp_processor_id(), __func__, cpu, read_c0_status());
- switch (cpu) {
- case 0:
- action = GIC_IPI_EXT_INTR_RESCHED_VPE0;
- break;
- case 1:
- action = GIC_IPI_EXT_INTR_RESCHED_VPE1;
- break;
- case 2:
- action = GIC_IPI_EXT_INTR_RESCHED_VPE2;
- break;
- case 3:
- action = GIC_IPI_EXT_INTR_RESCHED_VPE3;
- break;
- }
- gic_send_ipi(action);
+ gic_send_ipi(plat_ipi_resched_int_xlate(cpu));
}
/*
@@ -206,7 +150,7 @@ static void cmp_boot_secondary(int cpu, struct task_struct *idle)
(unsigned long)(gp + sizeof(struct thread_info)));
#endif
- amon_cpu_start(cpu, pc, sp, gp, a0);
+ amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0);
}
/*
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
index 9021108eb9c1..05dd170a83f7 100644
--- a/arch/mips/kernel/sync-r4k.c
+++ b/arch/mips/kernel/sync-r4k.c
@@ -1,7 +1,7 @@
/*
* Count register synchronisation.
*
- * All CPUs will have their count registers synchronised to the CPU0 expirelo
+ * All CPUs will have their count registers synchronised to the CPU0 next time
* value. This can cause a small timewarp for CPU0. All other CPU's should
* not have done anything significant (but they may have had interrupts
* enabled briefly - prom_smp_finish() should not be responsible for enabling
@@ -13,21 +13,22 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irqflags.h>
-#include <linux/r4k-timer.h>
+#include <linux/cpumask.h>
+#include <asm/r4k-timer.h>
#include <asm/atomic.h>
#include <asm/barrier.h>
-#include <asm/cpumask.h>
#include <asm/mipsregs.h>
-static atomic_t __initdata count_start_flag = ATOMIC_INIT(0);
-static atomic_t __initdata count_count_start = ATOMIC_INIT(0);
-static atomic_t __initdata count_count_stop = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_start_flag = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_count_start = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_count_stop = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0);
#define COUNTON 100
#define NR_LOOPS 5
-void __init synchronise_count_master(void)
+void __cpuinit synchronise_count_master(void)
{
int i;
unsigned long flags;
@@ -42,19 +43,20 @@ void __init synchronise_count_master(void)
return;
#endif
- pr_info("Checking COUNT synchronization across %u CPUs: ",
- num_online_cpus());
+ printk(KERN_INFO "Synchronize counters across %u CPUs: ",
+ num_online_cpus());
local_irq_save(flags);
/*
* Notify the slaves that it's time to start
*/
+ atomic_set(&count_reference, read_c0_count());
atomic_set(&count_start_flag, 1);
smp_wmb();
- /* Count will be initialised to expirelo for all CPU's */
- initcount = expirelo;
+ /* Count will be initialised to current timer for all CPU's */
+ initcount = read_c0_count();
/*
* We loop a few times to get a primed instruction cache,
@@ -106,7 +108,7 @@ void __init synchronise_count_master(void)
printk("done.\n");
}
-void __init synchronise_count_slave(void)
+void __cpuinit synchronise_count_slave(void)
{
int i;
unsigned long flags;
@@ -131,8 +133,8 @@ void __init synchronise_count_slave(void)
while (!atomic_read(&count_start_flag))
mb();
- /* Count will be initialised to expirelo for all CPU's */
- initcount = expirelo;
+ /* Count will be initialised to next expire for all CPU's */
+ initcount = atomic_read(&count_reference);
ncpus = num_online_cpus();
for (i = 0; i < NR_LOOPS; i++) {
@@ -156,4 +158,3 @@ void __init synchronise_count_slave(void)
local_irq_restore(flags);
}
#undef NR_LOOPS
-#endif
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 3ca5f42e819d..07b9ec2c6e3d 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1387,7 +1387,7 @@ static ssize_t store_ntcs(struct device *dev, struct device_attribute *attr,
return len;
out_einval:
- return -EINVAL;;
+ return -EINVAL;
}
static struct device_attribute vpe_class_attributes[] = {
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 475038a141a6..27c807b67fea 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -30,6 +30,7 @@
#include <asm/cacheflush.h>
#include <asm/traps.h>
+#include <asm/gcmpregs.h>
#include <asm/mips-boards/prom.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/bonito64.h>
@@ -192,6 +193,8 @@ extern struct plat_smp_ops msmtc_smp_ops;
void __init prom_init(void)
{
+ int result;
+
prom_argc = fw_arg0;
_prom_argv = (int *) fw_arg1;
_prom_envp = (int *) fw_arg2;
@@ -358,12 +361,21 @@ void __init prom_init(void)
#ifdef CONFIG_SERIAL_8250_CONSOLE
console_config();
#endif
+ /* Early detection of CMP support */
+ result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
+
#ifdef CONFIG_MIPS_CMP
- register_smp_ops(&cmp_smp_ops);
+ if (result)
+ register_smp_ops(&cmp_smp_ops);
#endif
#ifdef CONFIG_MIPS_MT_SMP
+#ifdef CONFIG_MIPS_CMP
+ if (!result)
+ register_smp_ops(&vsmp_smp_ops);
+#else
register_smp_ops(&vsmp_smp_ops);
#endif
+#endif
#ifdef CONFIG_MIPS_MT_SMTC
register_smp_ops(&msmtc_smp_ops);
#endif
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index b4eaf137e4a7..a8756f82c31b 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -331,6 +331,21 @@ static struct irqaction irq_call = {
.flags = IRQF_DISABLED|IRQF_PERCPU,
.name = "IPI_call"
};
+
+static int gic_resched_int_base;
+static int gic_call_int_base;
+#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
+#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
+
+unsigned int plat_ipi_call_int_xlate(unsigned int cpu)
+{
+ return GIC_CALL_INT(cpu);
+}
+
+unsigned int plat_ipi_resched_int_xlate(unsigned int cpu)
+{
+ return GIC_RESCHED_INT(cpu);
+}
#endif /* CONFIG_MIPS_MT_SMP */
static struct irqaction i8259irq = {
@@ -370,7 +385,7 @@ static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
* Interrupts and CPUs/Core Interrupts. The nature of the External
* Interrupts is also defined here - polarity/trigger.
*/
-static struct gic_intr_map gic_intr_map[] = {
+static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
{ GIC_EXT_INTR(0), X, X, X, X, 0 },
{ GIC_EXT_INTR(1), X, X, X, X, 0 },
{ GIC_EXT_INTR(2), X, X, X, X, 0 },
@@ -387,21 +402,14 @@ static struct gic_intr_map gic_intr_map[] = {
{ GIC_EXT_INTR(13), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
{ GIC_EXT_INTR(14), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
{ GIC_EXT_INTR(15), X, X, X, X, 0 },
- { GIC_EXT_INTR(16), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(17), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(18), 1, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(19), 1, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(20), 2, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(21), 2, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(22), 3, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(23), 3, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
+/* This is the end of the general interrupts now we do IPI ones */
};
#endif
/*
* GCMP needs to be detected before any SMP initialisation
*/
-static int __init gcmp_probe(unsigned long addr, unsigned long size)
+int __init gcmp_probe(unsigned long addr, unsigned long size)
{
if (gcmp_present >= 0)
return gcmp_present;
@@ -416,28 +424,36 @@ static int __init gcmp_probe(unsigned long addr, unsigned long size)
}
#if defined(CONFIG_MIPS_MT_SMP)
+static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin)
+{
+ int intr = baseintr + cpu;
+ gic_intr_map[intr].intrnum = GIC_EXT_INTR(intr);
+ gic_intr_map[intr].cpunum = cpu;
+ gic_intr_map[intr].pin = cpupin;
+ gic_intr_map[intr].polarity = GIC_POL_POS;
+ gic_intr_map[intr].trigtype = GIC_TRIG_EDGE;
+ gic_intr_map[intr].ipiflag = 1;
+ ipi_map[cpu] |= (1 << (cpupin + 2));
+}
+
static void __init fill_ipi_map(void)
{
- int i;
+ int cpu;
- for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) {
- if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X))
- ipi_map[gic_intr_map[i].cpunum] |=
- (1 << (gic_intr_map[i].pin + 2));
+ for (cpu = 0; cpu < NR_CPUS; cpu++) {
+ fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1);
+ fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2);
}
}
#endif
void __init arch_init_irq(void)
{
- int gic_present, gcmp_present;
-
init_i8259_irqs();
if (!cpu_has_veic)
mips_cpu_irq_init();
- gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
if (gcmp_present) {
GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK;
gic_present = 1;
@@ -514,24 +530,10 @@ void __init arch_init_irq(void)
if (gic_present) {
/* FIXME */
int i;
- struct {
- unsigned int resched;
- unsigned int call;
- } ipiirq[] = {
- {
- .resched = GIC_IPI_EXT_INTR_RESCHED_VPE0,
- .call = GIC_IPI_EXT_INTR_CALLFNC_VPE0},
- {
- .resched = GIC_IPI_EXT_INTR_RESCHED_VPE1,
- .call = GIC_IPI_EXT_INTR_CALLFNC_VPE1
- }, {
- .resched = GIC_IPI_EXT_INTR_RESCHED_VPE2,
- .call = GIC_IPI_EXT_INTR_CALLFNC_VPE2
- }, {
- .resched = GIC_IPI_EXT_INTR_RESCHED_VPE3,
- .call = GIC_IPI_EXT_INTR_CALLFNC_VPE3
- }
- };
+
+ gic_call_int_base = GIC_NUM_INTRS - NR_CPUS;
+ gic_resched_int_base = gic_call_int_base - NR_CPUS;
+
fill_ipi_map();
gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
if (!gcmp_present) {
@@ -553,12 +555,15 @@ void __init arch_init_irq(void)
printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status());
write_c0_status(0x1100dc00);
printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
- for (i = 0; i < ARRAY_SIZE(ipiirq); i++) {
- setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched);
- setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call);
-
- set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq);
- set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq);
+ for (i = 0; i < NR_CPUS; i++) {
+ setup_irq(MIPS_GIC_IRQ_BASE +
+ GIC_RESCHED_INT(i), &irq_resched);
+ setup_irq(MIPS_GIC_IRQ_BASE +
+ GIC_CALL_INT(i), &irq_call);
+ set_irq_handler(MIPS_GIC_IRQ_BASE +
+ GIC_RESCHED_INT(i), handle_percpu_irq);
+ set_irq_handler(MIPS_GIC_IRQ_BASE +
+ GIC_CALL_INT(i), handle_percpu_irq);
}
} else {
/* set up ipi interrupts */
diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c
index 42dee4da37ba..f48d60e84290 100644
--- a/arch/mips/mti-malta/malta-reset.c
+++ b/arch/mips/mti-malta/malta-reset.c
@@ -28,9 +28,6 @@
#include <asm/reboot.h>
#include <asm/mips-boards/generic.h>
-static void mips_machine_restart(char *command);
-static void mips_machine_halt(void);
-
static void mips_machine_restart(char *command)
{
unsigned int __iomem *softres_reg =
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index e8a97f59e066..63d8a297c58d 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -52,3 +52,8 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
+
+ifdef CONFIG_PCI_MSI
+obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
+endif
diff --git a/arch/mips/pci/fixup-capcella.c b/arch/mips/pci/fixup-capcella.c
index 1416bca6d1a3..1c02f5737367 100644
--- a/arch/mips/pci/fixup-capcella.c
+++ b/arch/mips/pci/fixup-capcella.c
@@ -1,7 +1,7 @@
/*
* fixup-cappcela.c, The ZAO Networks Capcella specific PCI fixups.
*
- * Copyright (C) 2002,2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002,2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c
index 591159625722..e08f49cb6875 100644
--- a/arch/mips/pci/fixup-mpc30x.c
+++ b/arch/mips/pci/fixup-mpc30x.c
@@ -1,7 +1,7 @@
/*
* fixup-mpc30x.c, The Victor MP-C303/304 specific PCI fixups.
*
- * Copyright (C) 2002,2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002,2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c
index ed87733f6796..8084b17d4406 100644
--- a/arch/mips/pci/fixup-tb0219.c
+++ b/arch/mips/pci/fixup-tb0219.c
@@ -2,7 +2,7 @@
* fixup-tb0219.c, The TANBAC TB0219 specific PCI fixups.
*
* Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp>
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0226.c b/arch/mips/pci/fixup-tb0226.c
index e3eedf4bf9bd..4196ccf3ea3d 100644
--- a/arch/mips/pci/fixup-tb0226.c
+++ b/arch/mips/pci/fixup-tb0226.c
@@ -1,7 +1,7 @@
/*
* fixup-tb0226.c, The TANBAC TB0226 specific PCI fixups.
*
- * Copyright (C) 2002-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c
index 267ab3dc3d42..2fe29db43725 100644
--- a/arch/mips/pci/fixup-tb0287.c
+++ b/arch/mips/pci/fixup-tb0287.c
@@ -1,7 +1,7 @@
/*
* fixup-tb0287.c, The TANBAC TB0287 specific PCI fixups.
*
- * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cavium-octeon/msi.c b/arch/mips/pci/msi-octeon.c
index 964b03b75a8f..03742e647657 100644
--- a/arch/mips/cavium-octeon/msi.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2005-2007 Cavium Networks
+ * Copyright (C) 2005-2009 Cavium Networks
*/
#include <linux/kernel.h>
#include <linux/init.h>
@@ -16,8 +16,7 @@
#include <asm/octeon/cvmx-pci-defs.h>
#include <asm/octeon/cvmx-npei-defs.h>
#include <asm/octeon/cvmx-pexp-defs.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
/*
* Each bit in msi_free_irq_bitmask represents a MSI interrupt that is
@@ -47,8 +46,8 @@ static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock);
* programming the MSI control bits [6:4] before calling
* pci_enable_msi().
*
- * @param dev Device requesting MSI interrupts
- * @param desc MSI descriptor
+ * @dev: Device requesting MSI interrupts
+ * @desc: MSI descriptor
*
* Returns 0 on success.
*/
@@ -213,14 +212,9 @@ void arch_teardown_msi_irq(unsigned int irq)
}
-/**
+/*
* Called by the interrupt handling code when an MSI interrupt
* occurs.
- *
- * @param cpl
- * @param dev_id
- *
- * @return
*/
static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id)
{
@@ -256,31 +250,37 @@ static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id)
}
-/**
+/*
* Initializes the MSI interrupt handling code
- *
- * @return
*/
int octeon_msi_initialize(void)
{
- int r;
if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
- r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
+ if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
IRQF_SHARED,
- "MSI[0:63]", octeon_msi_interrupt);
+ "MSI[0:63]", octeon_msi_interrupt))
+ panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
} else if (octeon_is_pci_host()) {
- r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
+ if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
IRQF_SHARED,
- "MSI[0:15]", octeon_msi_interrupt);
- r += request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt,
- IRQF_SHARED,
- "MSI[16:31]", octeon_msi_interrupt);
- r += request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt,
- IRQF_SHARED,
- "MSI[32:47]", octeon_msi_interrupt);
- r += request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt,
- IRQF_SHARED,
- "MSI[48:63]", octeon_msi_interrupt);
+ "MSI[0:15]", octeon_msi_interrupt))
+ panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
+
+ if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt,
+ IRQF_SHARED,
+ "MSI[16:31]", octeon_msi_interrupt))
+ panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed");
+
+ if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt,
+ IRQF_SHARED,
+ "MSI[32:47]", octeon_msi_interrupt))
+ panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed");
+
+ if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt,
+ IRQF_SHARED,
+ "MSI[48:63]", octeon_msi_interrupt))
+ panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed");
+
}
return 0;
}
diff --git a/arch/mips/pci/ops-vr41xx.c b/arch/mips/pci/ops-vr41xx.c
index 900c6b32576c..28962a7c6606 100644
--- a/arch/mips/pci/ops-vr41xx.c
+++ b/arch/mips/pci/ops-vr41xx.c
@@ -2,8 +2,8 @@
* ops-vr41xx.c, PCI configuration routines for the PCIU of NEC VR4100 series.
*
* Copyright (C) 2001-2003 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +21,7 @@
*/
/*
* Changes:
- * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ * MontaVista Software Inc. <source@mvista.com>
* - New creation, NEC VR4122 and VR4131 are supported.
*/
#include <linux/pci.h>
diff --git a/arch/mips/cavium-octeon/pci.c b/arch/mips/pci/pci-octeon.c
index 67c0ff5e92f1..9cb0c807f564 100644
--- a/arch/mips/cavium-octeon/pci.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2005-2007 Cavium Networks
+ * Copyright (C) 2005-2009 Cavium Networks
*/
#include <linux/kernel.h>
#include <linux/init.h>
@@ -17,8 +17,7 @@
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-npi-defs.h>
#include <asm/octeon/cvmx-pci-defs.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
#define USE_OCTEON_INTERNAL_ARBITER
@@ -54,6 +53,126 @@ union octeon_pci_address {
} s;
};
+int __initdata (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
+ u8 slot, u8 pin);
+enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
+
+/**
+ * Map a PCI device to the appropriate interrupt line
+ *
+ * @dev: The Linux PCI device structure for the device to map
+ * @slot: The slot number for this device on __BUS 0__. Linux
+ * enumerates through all the bridges and figures out the
+ * slot on Bus 0 where this device eventually hooks to.
+ * @pin: The PCI interrupt pin read from the device, then swizzled
+ * as it goes through each bridge.
+ * Returns Interrupt number for the device
+ */
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (octeon_pcibios_map_irq)
+ return octeon_pcibios_map_irq(dev, slot, pin);
+ else
+ panic("octeon_pcibios_map_irq not set.");
+}
+
+
+/*
+ * Called to perform platform specific PCI setup
+ */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ uint16_t config;
+ uint32_t dconfig;
+ int pos;
+ /*
+ * Force the Cache line setting to 64 bytes. The standard
+ * Linux bus scan doesn't seem to set it. Octeon really has
+ * 128 byte lines, but Intel bridges get really upset if you
+ * try and set values above 64 bytes. Value is specified in
+ * 32bit words.
+ */
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
+ /* Set latency timers for all devices */
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
+
+ /* Enable reporting System errors and parity errors on all devices */
+ /* Enable parity checking and error reporting */
+ pci_read_config_word(dev, PCI_COMMAND, &config);
+ config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+ pci_write_config_word(dev, PCI_COMMAND, config);
+
+ if (dev->subordinate) {
+ /* Set latency timers on sub bridges */
+ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
+ /* More bridge error detection */
+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
+ config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
+ }
+
+ /* Enable the PCIe normal error reporting */
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (pos) {
+ /* Update Device Control */
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
+ /* Correctable Error Reporting */
+ config |= PCI_EXP_DEVCTL_CERE;
+ /* Non-Fatal Error Reporting */
+ config |= PCI_EXP_DEVCTL_NFERE;
+ /* Fatal Error Reporting */
+ config |= PCI_EXP_DEVCTL_FERE;
+ /* Unsupported Request */
+ config |= PCI_EXP_DEVCTL_URRE;
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
+ }
+
+ /* Find the Advanced Error Reporting capability */
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+ if (pos) {
+ /* Clear Uncorrectable Error Status */
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
+ &dconfig);
+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
+ dconfig);
+ /* Enable reporting of all uncorrectable errors */
+ /* Uncorrectable Error Mask - turned on bits disable errors */
+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
+ /*
+ * Leave severity at HW default. This only controls if
+ * errors are reported as uncorrectable or
+ * correctable, not if the error is reported.
+ */
+ /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
+ /* Clear Correctable Error Status */
+ pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
+ pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
+ /* Enable reporting of all correctable errors */
+ /* Correctable Error Mask - turned on bits disable errors */
+ pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
+ /* Advanced Error Capabilities */
+ pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
+ /* ECRC Generation Enable */
+ if (config & PCI_ERR_CAP_ECRC_GENC)
+ config |= PCI_ERR_CAP_ECRC_GENE;
+ /* ECRC Check Enable */
+ if (config & PCI_ERR_CAP_ECRC_CHKC)
+ config |= PCI_ERR_CAP_ECRC_CHKE;
+ pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
+ /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
+ /* Report all errors to the root complex */
+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
+ PCI_ERR_ROOT_CMD_COR_EN |
+ PCI_ERR_ROOT_CMD_NONFATAL_EN |
+ PCI_ERR_ROOT_CMD_FATAL_EN);
+ /* Clear the Root status register */
+ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
+ }
+
+ return 0;
+}
+
/**
* Return the mapping of PCI device number to IRQ line. Each
* character in the return string represents the interrupt
@@ -136,9 +255,8 @@ int __init octeon_pci_pcibios_map_irq(const struct pci_dev *dev,
}
-/**
+/*
* Read a value from configuration space
- *
*/
static int octeon_read_config(struct pci_bus *bus, unsigned int devfn,
int reg, int size, u32 *val)
@@ -174,15 +292,8 @@ static int octeon_read_config(struct pci_bus *bus, unsigned int devfn,
}
-/**
+/*
* Write a value to PCI configuration space
- *
- * @bus:
- * @devfn:
- * @reg:
- * @size:
- * @val:
- * Returns
*/
static int octeon_write_config(struct pci_bus *bus, unsigned int devfn,
int reg, int size, u32 val)
@@ -251,10 +362,8 @@ static struct pci_controller octeon_pci_controller = {
};
-/**
+/*
* Low level initialize the Octeon PCI controller
- *
- * Returns
*/
static void octeon_pci_initialize(void)
{
@@ -398,7 +507,7 @@ static void octeon_pci_initialize(void)
pci_int_arb_cfg.s.en = 1; /* Internal arbiter enable */
cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, pci_int_arb_cfg.u64);
}
-#endif /* USE_OCTEON_INTERNAL_ARBITER */
+#endif /* USE_OCTEON_INTERNAL_ARBITER */
/*
* Preferrably written to 1 to set MLTD. [RDSATI,TRTAE,
@@ -457,10 +566,8 @@ static void octeon_pci_initialize(void)
}
-/**
+/*
* Initialize the Octeon PCI controller
- *
- * Returns
*/
static int __init octeon_pci_setup(void)
{
diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c
index d1e049b55f34..56525711f8b7 100644
--- a/arch/mips/pci/pci-vr41xx.c
+++ b/arch/mips/pci/pci-vr41xx.c
@@ -2,8 +2,8 @@
* pci-vr41xx.c, PCI Control Unit routines for the NEC VR4100 series.
*
* Copyright (C) 2001-2003 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2004-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2004-2008 Yoichi Yuasa <yuasa@linux-mips.org>
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify
@@ -22,7 +22,7 @@
*/
/*
* Changes:
- * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ * MontaVista Software Inc. <source@mvista.com>
* - New creation, NEC VR4122 and VR4131 are supported.
*/
#include <linux/init.h>
diff --git a/arch/mips/pci/pci-vr41xx.h b/arch/mips/pci/pci-vr41xx.h
index 8a35e32b8376..6b1ae2eb1c06 100644
--- a/arch/mips/pci/pci-vr41xx.h
+++ b/arch/mips/pci/pci-vr41xx.h
@@ -2,8 +2,8 @@
* pci-vr41xx.h, Include file for PCI Control Unit of the NEC VR4100 series.
*
* Copyright (C) 2002 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cavium-octeon/pcie.c b/arch/mips/pci/pcie-octeon.c
index 49d14081b3b5..75262247f3e4 100644
--- a/arch/mips/cavium-octeon/pcie.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -18,8 +18,7 @@
#include <asm/octeon/cvmx-pescx-defs.h>
#include <asm/octeon/cvmx-pexp-defs.h>
#include <asm/octeon/cvmx-helper-errata.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
union cvmx_pcie_address {
uint64_t u64;
@@ -976,13 +975,13 @@ static int cvmx_pcie_rc_initialize(int pcie_port)
/**
* Map a PCI device to the appropriate interrupt line
*
- * @param dev The Linux PCI device structure for the device to map
- * @param slot The slot number for this device on __BUS 0__. Linux
+ * @dev: The Linux PCI device structure for the device to map
+ * @slot: The slot number for this device on __BUS 0__. Linux
* enumerates through all the bridges and figures out the
* slot on Bus 0 where this device eventually hooks to.
- * @param pin The PCI interrupt pin read from the device, then swizzled
+ * @pin: The PCI interrupt pin read from the device, then swizzled
* as it goes through each bridge.
- * @return Interrupt number for the device
+ * Returns Interrupt number for the device
*/
int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev,
u8 slot, u8 pin)
@@ -1025,12 +1024,12 @@ int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev,
/**
* Read a value from configuration space
*
- * @param bus
- * @param devfn
- * @param reg
- * @param size
- * @param val
- * @return
+ * @bus:
+ * @devfn:
+ * @reg:
+ * @size:
+ * @val:
+ * Returns
*/
static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
unsigned int devfn, int reg, int size,
@@ -1156,12 +1155,12 @@ static int octeon_pcie1_read_config(struct pci_bus *bus, unsigned int devfn,
/**
* Write a value to PCI configuration space
*
- * @param bus
- * @param devfn
- * @param reg
- * @param size
- * @param val
- * @return
+ * @bus:
+ * @devfn:
+ * @reg:
+ * @size:
+ * @val:
+ * Returns
*/
static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus,
unsigned int devfn, int reg,
@@ -1254,7 +1253,7 @@ static struct pci_controller octeon_pcie1_controller = {
/**
* Initialize the Octeon PCIe controllers
*
- * @return
+ * Returns
*/
static int __init octeon_pcie_setup(void)
{
diff --git a/arch/mips/vr41xx/casio-e55/setup.c b/arch/mips/vr41xx/casio-e55/setup.c
index 6d9bab890587..719f4a5b9844 100644
--- a/arch/mips/vr41xx/casio-e55/setup.c
+++ b/arch/mips/vr41xx/casio-e55/setup.c
@@ -1,7 +1,7 @@
/*
* setup.c, Setup for the CASIO CASSIOPEIA E-11/15/55/65.
*
- * Copyright (C) 2002-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/bcu.c b/arch/mips/vr41xx/common/bcu.c
index d77c330a0d59..6346c59c9f9d 100644
--- a/arch/mips/vr41xx/common/bcu.c
+++ b/arch/mips/vr41xx/common/bcu.c
@@ -2,8 +2,8 @@
* bcu.c, Bus Control Unit routines for the NEC VR4100 series.
*
* Copyright (C) 2002 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
- * Copyright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2003-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
*/
/*
* Changes:
- * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ * MontaVista Software Inc. <source@mvista.com>
* - New creation, NEC VR4122 and VR4131 are supported.
* - Added support for NEC VR4111 and VR4121.
*
- * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Yoichi Yuasa <yuasa@linux-mips.org>
* - Added support for NEC VR4133.
*/
#include <linux/kernel.h>
diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c
index ad0e8e3409d9..8ba7d04a5ec5 100644
--- a/arch/mips/vr41xx/common/cmu.c
+++ b/arch/mips/vr41xx/common/cmu.c
@@ -2,8 +2,8 @@
* cmu.c, Clock Mask Unit routines for the NEC VR4100 series.
*
* Copyright (C) 2001-2002 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copuright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copuright (C) 2003-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
*/
/*
* Changes:
- * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ * MontaVista Software Inc. <source@mvista.com>
* - New creation, NEC VR4122 and VR4131 are supported.
* - Added support for NEC VR4111 and VR4121.
*
- * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Yoichi Yuasa <yuasa@linux-mips.org>
* - Added support for NEC VR4133.
*/
#include <linux/init.h>
diff --git a/arch/mips/vr41xx/common/giu.c b/arch/mips/vr41xx/common/giu.c
index 2b272f1496fe..22cc6f2100a1 100644
--- a/arch/mips/vr41xx/common/giu.c
+++ b/arch/mips/vr41xx/common/giu.c
@@ -1,7 +1,7 @@
/*
* NEC VR4100 series GIU platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c
index 3f23d9fda662..6d39e222b170 100644
--- a/arch/mips/vr41xx/common/icu.c
+++ b/arch/mips/vr41xx/common/icu.c
@@ -2,8 +2,8 @@
* icu.c, Interrupt Control Unit routines for the NEC VR4100 series.
*
* Copyright (C) 2001-2002 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
*/
/*
* Changes:
- * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ * MontaVista Software Inc. <source@mvista.com>
* - New creation, NEC VR4122 and VR4131 are supported.
* - Added support for NEC VR4111 and VR4121.
*
- * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Yoichi Yuasa <yuasa@linux-mips.org>
* - Coped with INTASSIGN of NEC VR4133.
*/
#include <linux/errno.h>
diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c
index c64995342ba8..1386e6f081c8 100644
--- a/arch/mips/vr41xx/common/init.c
+++ b/arch/mips/vr41xx/common/init.c
@@ -1,7 +1,7 @@
/*
* init.c, Common initialization routines for NEC VR4100 series.
*
- * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c
index 9cc389109b19..bef06872f012 100644
--- a/arch/mips/vr41xx/common/irq.c
+++ b/arch/mips/vr41xx/common/irq.c
@@ -1,7 +1,7 @@
/*
* Interrupt handing routines for NEC VR4100 series.
*
- * Copyright (C) 2005-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005-2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c
index 028aaf75eb21..692b4e85b7fc 100644
--- a/arch/mips/vr41xx/common/pmu.c
+++ b/arch/mips/vr41xx/common/pmu.c
@@ -1,7 +1,7 @@
/*
* pmu.c, Power Management Unit routines for NEC VR4100 series.
*
- * Copyright (C) 2003-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/rtc.c b/arch/mips/vr41xx/common/rtc.c
index 9f26c14edcac..ebc5dcf0ed8e 100644
--- a/arch/mips/vr41xx/common/rtc.c
+++ b/arch/mips/vr41xx/common/rtc.c
@@ -1,7 +1,7 @@
/*
* NEC VR4100 series RTC platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/siu.c b/arch/mips/vr41xx/common/siu.c
index 654dee6208be..54eae56108fb 100644
--- a/arch/mips/vr41xx/common/siu.c
+++ b/arch/mips/vr41xx/common/siu.c
@@ -1,7 +1,7 @@
/*
* NEC VR4100 series SIU platform device.
*
- * Copyright (C) 2007-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/type.c b/arch/mips/vr41xx/common/type.c
index e0c1ac5e988e..ff841422b638 100644
--- a/arch/mips/vr41xx/common/type.c
+++ b/arch/mips/vr41xx/common/type.c
@@ -1,7 +1,7 @@
/*
* type.c, System type for NEC VR4100 series.
*
- * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/ibm-workpad/setup.c b/arch/mips/vr41xx/ibm-workpad/setup.c
index 9eef297eca1a..3982f378a3e6 100644
--- a/arch/mips/vr41xx/ibm-workpad/setup.c
+++ b/arch/mips/vr41xx/ibm-workpad/setup.c
@@ -1,7 +1,7 @@
/*
* setup.c, Setup for the IBM WorkPad z50.
*
- * Copyright (C) 2002-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
index e58b9a46e1b1..35d2ed6396f6 100644
--- a/arch/mn10300/include/asm/pci.h
+++ b/arch/mn10300/include/asm/pci.h
@@ -70,10 +70,6 @@ struct pci_dev;
*/
#define PCI_DMA_BUS_IS_PHYS (1)
-
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
/* Return the index of the PCI controller for device. */
static inline int pci_controller_num(struct pci_dev *dev)
{
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
index 78a3881f3c12..58d64f8b2cc3 100644
--- a/arch/mn10300/include/asm/thread_info.h
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -65,8 +65,6 @@ struct thread_info {
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
@@ -76,7 +74,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index fef5b434dadc..fad68616af32 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -346,10 +346,12 @@
#define __NR_inotify_init1 333
#define __NR_preadv 334
#define __NR_pwritev 335
+#define __NR_rt_tgsigqueueinfo 336
+#define __NR_perf_counter_open 337
#ifdef __KERNEL__
-#define NR_syscalls 326
+#define NR_syscalls 338
/*
* specify the deprecated syscalls we want to support on this arch
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 7408a27199f3..e0d2563af4f2 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -722,6 +722,8 @@ ENTRY(sys_call_table)
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev /* 335 */
+ .long sys_rt_tgsigqueueinfo
+ .long sys_perf_counter_open
nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
index 681ad8c9e4fb..0dfdc5001124 100644
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@@ -136,8 +136,7 @@ void show_trace(unsigned long *sp)
unsigned long *stack, addr, module_start, module_end;
int i;
- printk(KERN_EMERG "\n"
- KERN_EMERG "Call Trace:");
+ printk(KERN_EMERG "\nCall Trace:");
stack = sp;
i = 0;
@@ -153,7 +152,7 @@ void show_trace(unsigned long *sp)
printk("\n");
#else
if ((i % 6) == 0)
- printk("\n" KERN_EMERG " ");
+ printk(KERN_EMERG " ");
printk("[<%08lx>] ", addr);
i++;
#endif
@@ -180,7 +179,7 @@ void show_stack(struct task_struct *task, unsigned long *sp)
if (((long) stack & (THREAD_SIZE - 1)) == 0)
break;
if ((i % 8) == 0)
- printk("\n" KERN_EMERG " ");
+ printk(KERN_EMERG " ");
printk("%08lx ", *stack++);
}
@@ -264,8 +263,7 @@ void show_registers(struct pt_regs *regs)
show_stack(current, (unsigned long *) sp);
#if 0
- printk(KERN_EMERG "\n"
- KERN_EMERG "Code: ");
+ printk(KERN_EMERG "\nCode: ");
if (regs->pc < PAGE_OFFSET)
goto bad;
@@ -311,16 +309,14 @@ void die(const char *str, struct pt_regs *regs, enum exception_code code)
{
console_verbose();
spin_lock_irq(&die_lock);
- printk(KERN_EMERG "\n"
- KERN_EMERG "%s: %04x\n",
+ printk(KERN_EMERG "\n%s: %04x\n",
str, code & 0xffff);
show_registers(regs);
if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 &&
(regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) {
printk(KERN_EMERG "Exception in usermode interrupt handler\n");
- printk(KERN_EMERG "\n"
- KERN_EMERG " Please connect to kernel debugger !!\n");
+ printk(KERN_EMERG "\nPlease connect to kernel debugger !!\n");
asm volatile ("0: bra 0b");
}
@@ -429,9 +425,8 @@ asmlinkage void io_bus_error(u32 bcberr, u32 bcbear, struct pt_regs *regs)
{
console_verbose();
- printk(KERN_EMERG "\n"
- KERN_EMERG "Asynchronous I/O Bus Error\n"
- KERN_EMERG "==========================\n");
+ printk(KERN_EMERG "Asynchronous I/O Bus Error\n");
+ printk(KERN_EMERG "==========================\n");
if (bcberr & BCBERR_BEME)
printk(KERN_EMERG "- Multiple recorded errors\n");
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index bcebcefb4ad7..c96ba3da95ac 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -61,7 +61,7 @@ SECTIONS
_edata = .; /* End of data section */
}
- .data.init_task : { INIT_TASK(THREAD_SIZE); }
+ .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); }
/* might get freed after init */
. = ALIGN(PAGE_SIZE);
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 9038f39d9d73..06f8d5b5b0f9 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -16,6 +16,8 @@ config PARISC
select RTC_DRV_GENERIC
select INIT_ALL_POSSIBLE
select BUG
+ select HAVE_PERF_COUNTERS
+ select GENERIC_ATOMIC64 if !64BIT
help
The PA-RISC microprocessor is designed by Hewlett-Packard and used
in many of their workstations & servers (HP9000 700 and 800 series,
diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
index 7eeaff944360..8bc9e96699b2 100644
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -222,13 +222,13 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-#define atomic_add(i,v) ((void)(__atomic_add_return( ((int)(i)),(v))))
-#define atomic_sub(i,v) ((void)(__atomic_add_return(-((int)(i)),(v))))
+#define atomic_add(i,v) ((void)(__atomic_add_return( (i),(v))))
+#define atomic_sub(i,v) ((void)(__atomic_add_return(-(i),(v))))
#define atomic_inc(v) ((void)(__atomic_add_return( 1,(v))))
#define atomic_dec(v) ((void)(__atomic_add_return( -1,(v))))
-#define atomic_add_return(i,v) (__atomic_add_return( ((int)(i)),(v)))
-#define atomic_sub_return(i,v) (__atomic_add_return(-((int)(i)),(v)))
+#define atomic_add_return(i,v) (__atomic_add_return( (i),(v)))
+#define atomic_sub_return(i,v) (__atomic_add_return(-(i),(v)))
#define atomic_inc_return(v) (__atomic_add_return( 1,(v)))
#define atomic_dec_return(v) (__atomic_add_return( -1,(v)))
@@ -336,7 +336,11 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-#endif /* CONFIG_64BIT */
+#else /* CONFIG_64BIT */
+
+#include <asm-generic/atomic64.h>
+
+#endif /* !CONFIG_64BIT */
#include <asm-generic/atomic-long.h>
diff --git a/arch/parisc/include/asm/dma.h b/arch/parisc/include/asm/dma.h
index 31ad0f05af3d..f7a18f968703 100644
--- a/arch/parisc/include/asm/dma.h
+++ b/arch/parisc/include/asm/dma.h
@@ -1,5 +1,4 @@
-/* $Id: dma.h,v 1.2 1999/04/27 00:46:18 deller Exp $
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+/* asm/dma.h: Defines for using and allocating dma channels.
* Written by Hennus Bergman, 1992.
* High DMA channel support & info by Hannu Savolainen
* and John Boyd, Nov. 1992.
diff --git a/arch/parisc/include/asm/perf_counter.h b/arch/parisc/include/asm/perf_counter.h
new file mode 100644
index 000000000000..dc9e829f7013
--- /dev/null
+++ b/arch/parisc/include/asm/perf_counter.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_PARISC_PERF_COUNTER_H
+#define __ASM_PARISC_PERF_COUNTER_H
+
+/* parisc only supports software counters through this interface. */
+static inline void set_perf_counter_pending(void) { }
+
+#endif /* __ASM_PARISC_PERF_COUNTER_H */
diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h
index 9d64df8754ba..9ce66e9d1c2b 100644
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -18,6 +18,7 @@
#include <asm/types.h>
#include <asm/system.h>
#include <asm/percpu.h>
+
#endif /* __ASSEMBLY__ */
#define KERNEL_STACK_SIZE (4*PAGE_SIZE)
@@ -127,6 +128,8 @@ struct thread_struct {
unsigned long flags;
};
+#define task_pt_regs(tsk) ((struct pt_regs *)&((tsk)->thread.regs))
+
/* Thread struct flags. */
#define PARISC_UAC_NOPRINT (1UL << 0) /* see prctl and unaligned.c */
#define PARISC_UAC_SIGBUS (1UL << 1)
diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h
index ee80c920b464..d91357bca5b4 100644
--- a/arch/parisc/include/asm/system.h
+++ b/arch/parisc/include/asm/system.h
@@ -168,8 +168,8 @@ static inline void set_eiem(unsigned long val)
/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */
#define __ldcw(a) ({ \
unsigned __ret; \
- __asm__ __volatile__(__LDCW " 0(%1),%0" \
- : "=r" (__ret) : "r" (a)); \
+ __asm__ __volatile__(__LDCW " 0(%2),%0" \
+ : "=r" (__ret), "+m" (*(a)) : "r" (a)); \
__ret; \
})
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index 0407959da489..4ce0edfbe969 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -23,7 +23,7 @@ struct thread_info {
.flags = 0, \
.cpu = 0, \
.addr_limit = KERNEL_DS, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall \
} \
diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h
index 1f6fd4fc05b9..8f1a8100bf2d 100644
--- a/arch/parisc/include/asm/tlbflush.h
+++ b/arch/parisc/include/asm/tlbflush.h
@@ -12,14 +12,12 @@
* N class systems, only one PxTLB inter processor broadcast can be
* active at any one time on the Merced bus. This tlb purge
* synchronisation is fairly lightweight and harmless so we activate
- * it on all SMP systems not just the N class. We also need to have
- * preemption disabled on uniprocessor machines, and spin_lock does that
- * nicely.
+ * it on all systems not just the N class.
*/
extern spinlock_t pa_tlb_lock;
-#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
-#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
+#define purge_tlb_start(flags) spin_lock_irqsave(&pa_tlb_lock, flags)
+#define purge_tlb_end(flags) spin_unlock_irqrestore(&pa_tlb_lock, flags)
extern void flush_tlb_all(void);
extern void flush_tlb_all_local(void *);
@@ -63,14 +61,16 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
static inline void flush_tlb_page(struct vm_area_struct *vma,
unsigned long addr)
{
+ unsigned long flags;
+
/* For one page, it's not worth testing the split_tlb variable */
mb();
mtsp(vma->vm_mm->context,1);
- purge_tlb_start();
+ purge_tlb_start(flags);
pdtlb(addr);
pitlb(addr);
- purge_tlb_end();
+ purge_tlb_end(flags);
}
void __flush_tlb_range(unsigned long sid,
diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h
index ef26b009dc5d..f3d3b8b012c4 100644
--- a/arch/parisc/include/asm/unistd.h
+++ b/arch/parisc/include/asm/unistd.h
@@ -807,8 +807,12 @@
#define __NR_dup3 (__NR_Linux + 312)
#define __NR_pipe2 (__NR_Linux + 313)
#define __NR_inotify_init1 (__NR_Linux + 314)
+#define __NR_preadv (__NR_Linux + 315)
+#define __NR_pwritev (__NR_Linux + 316)
+#define __NR_rt_tgsigqueueinfo (__NR_Linux + 317)
+#define __NR_perf_counter_open (__NR_Linux + 318)
-#define __NR_Linux_syscalls (__NR_inotify_init1 + 1)
+#define __NR_Linux_syscalls (__NR_perf_counter_open + 1)
#define __IGNORE_select /* newselect */
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 837530ea32e7..b6ed34de14e1 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -1,5 +1,4 @@
-/* $Id: cache.c,v 1.4 2000/01/25 00:11:38 prumpf Exp $
- *
+/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
@@ -398,12 +397,13 @@ EXPORT_SYMBOL(flush_kernel_icache_range_asm);
void clear_user_page_asm(void *page, unsigned long vaddr)
{
+ unsigned long flags;
/* This function is implemented in assembly in pacache.S */
extern void __clear_user_page_asm(void *page, unsigned long vaddr);
- purge_tlb_start();
+ purge_tlb_start(flags);
__clear_user_page_asm(page, vaddr);
- purge_tlb_end();
+ purge_tlb_end(flags);
}
#define FLUSH_THRESHOLD 0x80000 /* 0.5MB */
@@ -444,20 +444,24 @@ extern void clear_user_page_asm(void *page, unsigned long vaddr);
void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
{
+ unsigned long flags;
+
purge_kernel_dcache_page((unsigned long)page);
- purge_tlb_start();
+ purge_tlb_start(flags);
pdtlb_kernel(page);
- purge_tlb_end();
+ purge_tlb_end(flags);
clear_user_page_asm(page, vaddr);
}
EXPORT_SYMBOL(clear_user_page);
void flush_kernel_dcache_page_addr(void *addr)
{
+ unsigned long flags;
+
flush_kernel_dcache_page_asm(addr);
- purge_tlb_start();
+ purge_tlb_start(flags);
pdtlb_kernel(addr);
- purge_tlb_end();
+ purge_tlb_end(flags);
}
EXPORT_SYMBOL(flush_kernel_dcache_page_addr);
@@ -490,8 +494,10 @@ void __flush_tlb_range(unsigned long sid, unsigned long start,
if (npages >= 512) /* 2MB of space: arbitrary, should be tuned */
flush_tlb_all();
else {
+ unsigned long flags;
+
mtsp(sid, 1);
- purge_tlb_start();
+ purge_tlb_start(flags);
if (split_tlb) {
while (npages--) {
pdtlb(start);
@@ -504,7 +510,7 @@ void __flush_tlb_range(unsigned long sid, unsigned long start,
start += PAGE_SIZE;
}
}
- purge_tlb_end();
+ purge_tlb_end(flags);
}
}
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index bd1f7f1ff74e..d228d8237879 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -170,23 +170,27 @@ static void __init pagezero_memconfig(void)
static int __init
pat_query_module(ulong pcell_loc, ulong mod_index)
{
- pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
+ pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
unsigned long bytecnt;
unsigned long temp; /* 64-bit scratch value */
long status; /* PDC return value status */
struct parisc_device *dev;
+ pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
+ if (!pa_pdc_cell)
+ panic("couldn't allocate memory for PDC_PAT_CELL!");
+
/* return cell module (PA or Processor view) */
status = pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
- PA_VIEW, &pa_pdc_cell);
+ PA_VIEW, pa_pdc_cell);
if (status != PDC_OK) {
/* no more cell modules or error */
return status;
}
- temp = pa_pdc_cell.cba;
- dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path);
+ temp = pa_pdc_cell->cba;
+ dev = alloc_pa_dev(PAT_GET_CBA(temp), &(pa_pdc_cell->mod_path));
if (!dev) {
return PDC_OK;
}
@@ -203,8 +207,8 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
/* save generic info returned from the call */
/* REVISIT: who is the consumer of this? not sure yet... */
- dev->mod_info = pa_pdc_cell.mod_info; /* pass to PAT_GET_ENTITY() */
- dev->pmod_loc = pa_pdc_cell.mod_location;
+ dev->mod_info = pa_pdc_cell->mod_info; /* pass to PAT_GET_ENTITY() */
+ dev->pmod_loc = pa_pdc_cell->mod_location;
register_parisc_device(dev); /* advertise device */
@@ -216,14 +220,14 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
case PAT_ENTITY_PROC:
printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n",
- pa_pdc_cell.mod[0]);
+ pa_pdc_cell->mod[0]);
break;
case PAT_ENTITY_MEM:
printk(KERN_DEBUG
"PAT_ENTITY_MEM: amount 0x%lx min_gni_base 0x%lx min_gni_len 0x%lx\n",
- pa_pdc_cell.mod[0], pa_pdc_cell.mod[1],
- pa_pdc_cell.mod[2]);
+ pa_pdc_cell->mod[0], pa_pdc_cell->mod[1],
+ pa_pdc_cell->mod[2]);
break;
case PAT_ENTITY_CA:
printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc);
@@ -243,23 +247,26 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
print_ranges:
pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
IO_VIEW, &io_pdc_cell);
- printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell.mod[1]);
- for (i = 0; i < pa_pdc_cell.mod[1]; i++) {
+ printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell->mod[1]);
+ for (i = 0; i < pa_pdc_cell->mod[1]; i++) {
printk(KERN_DEBUG
" PA_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n",
- i, pa_pdc_cell.mod[2 + i * 3], /* type */
- pa_pdc_cell.mod[3 + i * 3], /* start */
- pa_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */
+ i, pa_pdc_cell->mod[2 + i * 3], /* type */
+ pa_pdc_cell->mod[3 + i * 3], /* start */
+ pa_pdc_cell->mod[4 + i * 3]); /* finish (ie end) */
printk(KERN_DEBUG
" IO_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n",
- i, io_pdc_cell.mod[2 + i * 3], /* type */
- io_pdc_cell.mod[3 + i * 3], /* start */
- io_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */
+ i, io_pdc_cell->mod[2 + i * 3], /* type */
+ io_pdc_cell->mod[3 + i * 3], /* start */
+ io_pdc_cell->mod[4 + i * 3]); /* finish (ie end) */
}
printk(KERN_DEBUG "\n");
break;
}
#endif /* DEBUG_PAT */
+
+ kfree(pa_pdc_cell);
+
return PDC_OK;
}
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 8007f1e65729..330f536a9324 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -120,7 +120,7 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest)
if (CHECK_IRQ_PER_CPU(irq)) {
/* Bad linux design decision. The mask has already
* been set; we must reset it */
- cpumask_setall(&irq_desc[irq].affinity);
+ cpumask_setall(irq_desc[irq].affinity);
return -EINVAL;
}
@@ -138,13 +138,13 @@ static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
if (cpu_dest < 0)
return -1;
- cpumask_copy(&irq_desc[irq].affinity, dest);
+ cpumask_copy(irq_desc[irq].affinity, dest);
return 0;
}
#endif
-static struct hw_interrupt_type cpu_interrupt_type = {
+static struct irq_chip cpu_interrupt_type = {
.typename = "CPU",
.startup = cpu_startup_irq,
.shutdown = cpu_disable_irq,
@@ -299,7 +299,7 @@ int txn_alloc_irq(unsigned int bits_wide)
unsigned long txn_affinity_addr(unsigned int irq, int cpu)
{
#ifdef CONFIG_SMP
- cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu));
+ cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
#endif
return per_cpu(cpu_data, cpu).txn_addr;
@@ -356,7 +356,7 @@ void do_cpu_irq_mask(struct pt_regs *regs)
irq = eirr_to_irq(eirr_val);
#ifdef CONFIG_SMP
- cpumask_copy(&dest, &irq_desc[irq].affinity);
+ cpumask_copy(&dest, irq_desc[irq].affinity);
if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) &&
!cpu_isset(smp_processor_id(), dest)) {
int cpu = first_cpu(dest);
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 7d927eac932b..c07f618ff7da 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -90,12 +90,14 @@ static inline int map_pte_uncached(pte_t * pte,
if (end > PMD_SIZE)
end = PMD_SIZE;
do {
+ unsigned long flags;
+
if (!pte_none(*pte))
printk(KERN_ERR "map_pte_uncached: page already exists\n");
set_pte(pte, __mk_pte(*paddr_ptr, PAGE_KERNEL_UNC));
- purge_tlb_start();
+ purge_tlb_start(flags);
pdtlb_kernel(orig_vaddr);
- purge_tlb_end();
+ purge_tlb_end(flags);
vaddr += PAGE_SIZE;
orig_vaddr += PAGE_SIZE;
(*paddr_ptr) += PAGE_SIZE;
@@ -168,11 +170,13 @@ static inline void unmap_uncached_pte(pmd_t * pmd, unsigned long vaddr,
if (end > PMD_SIZE)
end = PMD_SIZE;
do {
+ unsigned long flags;
pte_t page = *pte;
+
pte_clear(&init_mm, vaddr, pte);
- purge_tlb_start();
+ purge_tlb_start(flags);
pdtlb_kernel(orig_vaddr);
- purge_tlb_end();
+ purge_tlb_end(flags);
vaddr += PAGE_SIZE;
orig_vaddr += PAGE_SIZE;
pte++;
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index 6936386c9861..f7064abc3bb6 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -1,5 +1,4 @@
-/* $Id: pci.c,v 1.6 2000/01/29 00:12:05 grundler Exp $
- *
+/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 61c07078c072..1f3aa8db0203 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -156,7 +156,7 @@ void machine_power_off(void)
* software. The user has to press the button himself. */
printk(KERN_EMERG "System shut down completed.\n"
- KERN_EMERG "Please power this system off now.");
+ "Please power this system off now.");
}
void (*pm_power_off)(void) = machine_power_off;
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index e09d0f7fb6b0..c8fb61ed32f4 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -1,5 +1,4 @@
-/* $Id: processor.c,v 1.1 2002/07/20 16:27:06 rhirst Exp $
- *
+/*
* Initial setup-routines for HP 9000 based hardware.
*
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
@@ -121,22 +120,28 @@ static int __cpuinit processor_probe(struct parisc_device *dev)
if (is_pdc_pat()) {
ulong status;
unsigned long bytecnt;
- pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
+ pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
#undef USE_PAT_CPUID
#ifdef USE_PAT_CPUID
struct pdc_pat_cpu_num cpu_info;
#endif
+ pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
+ if (!pa_pdc_cell)
+ panic("couldn't allocate memory for PDC_PAT_CELL!");
+
status = pdc_pat_cell_module(&bytecnt, dev->pcell_loc,
- dev->mod_index, PA_VIEW, &pa_pdc_cell);
+ dev->mod_index, PA_VIEW, pa_pdc_cell);
BUG_ON(PDC_OK != status);
/* verify it's the same as what do_pat_inventory() found */
- BUG_ON(dev->mod_info != pa_pdc_cell.mod_info);
- BUG_ON(dev->pmod_loc != pa_pdc_cell.mod_location);
+ BUG_ON(dev->mod_info != pa_pdc_cell->mod_info);
+ BUG_ON(dev->pmod_loc != pa_pdc_cell->mod_location);
+
+ txn_addr = pa_pdc_cell->mod[0]; /* id_eid for IO sapic */
- txn_addr = pa_pdc_cell.mod[0]; /* id_eid for IO sapic */
+ kfree(pa_pdc_cell);
#ifdef USE_PAT_CPUID
/* We need contiguous numbers for cpuid. Firmware's notion
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 82131ca8e05c..cb71f3dac995 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -1,5 +1,4 @@
-/* $Id: setup.c,v 1.8 2000/02/02 04:42:38 prumpf Exp $
- *
+/*
* Initial setup-routines for HP 9000 based hardware.
*
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 1adb40c81669..92a0acaa0d12 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -174,68 +174,6 @@ asmlinkage long sys32_sched_rr_get_interval(pid_t pid,
return ret;
}
-/*** copied from mips64 ***/
-/*
- * Ooo, nasty. We need here to frob 32-bit unsigned longs to
- * 64-bit unsigned longs.
- */
-
-static inline int
-get_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
-{
- n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
- if (ufdset) {
- unsigned long odd;
-
- if (!access_ok(VERIFY_WRITE, ufdset, n*sizeof(u32)))
- return -EFAULT;
-
- odd = n & 1UL;
- n &= ~1UL;
- while (n) {
- unsigned long h, l;
- __get_user(l, ufdset);
- __get_user(h, ufdset+1);
- ufdset += 2;
- *fdset++ = h << 32 | l;
- n -= 2;
- }
- if (odd)
- __get_user(*fdset, ufdset);
- } else {
- /* Tricky, must clear full unsigned long in the
- * kernel fdset at the end, this makes sure that
- * actually happens.
- */
- memset(fdset, 0, ((n + 1) & ~1)*sizeof(u32));
- }
- return 0;
-}
-
-static inline void
-set_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
-{
- unsigned long odd;
- n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
-
- if (!ufdset)
- return;
-
- odd = n & 1UL;
- n &= ~1UL;
- while (n) {
- unsigned long h, l;
- l = *fdset++;
- h = l >> 32;
- __put_user(l, ufdset);
- __put_user(h, ufdset+1);
- ufdset += 2;
- n -= 2;
- }
- if (odd)
- __put_user(*fdset, ufdset);
-}
-
struct msgbuf32 {
int mtype;
char mtext[1];
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 03b9a01bc16c..cf145eb026b3 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -413,6 +413,10 @@
ENTRY_SAME(dup3)
ENTRY_SAME(pipe2)
ENTRY_SAME(inotify_init1)
+ ENTRY_COMP(preadv) /* 315 */
+ ENTRY_COMP(pwritev)
+ ENTRY_COMP(rt_tgsigqueueinfo)
+ ENTRY_SAME(perf_counter_open)
/* Nothing yet */
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index d4dd05674c62..a79c6f9e7e2c 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -56,9 +56,9 @@ static unsigned long clocktick __read_mostly; /* timer cycles per tick */
*/
irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
{
- unsigned long now;
+ unsigned long now, now2;
unsigned long next_tick;
- unsigned long cycles_elapsed, ticks_elapsed;
+ unsigned long cycles_elapsed, ticks_elapsed = 1;
unsigned long cycles_remainder;
unsigned int cpu = smp_processor_id();
struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu);
@@ -71,44 +71,24 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
/* Initialize next_tick to the expected tick time. */
next_tick = cpuinfo->it_value;
- /* Get current interval timer.
- * CR16 reads as 64 bits in CPU wide mode.
- * CR16 reads as 32 bits in CPU narrow mode.
- */
+ /* Get current cycle counter (Control Register 16). */
now = mfctl(16);
cycles_elapsed = now - next_tick;
- if ((cycles_elapsed >> 5) < cpt) {
+ if ((cycles_elapsed >> 6) < cpt) {
/* use "cheap" math (add/subtract) instead
* of the more expensive div/mul method
*/
cycles_remainder = cycles_elapsed;
- ticks_elapsed = 1;
while (cycles_remainder > cpt) {
cycles_remainder -= cpt;
ticks_elapsed++;
}
} else {
+ /* TODO: Reduce this to one fdiv op */
cycles_remainder = cycles_elapsed % cpt;
- ticks_elapsed = 1 + cycles_elapsed / cpt;
- }
-
- /* Can we differentiate between "early CR16" (aka Scenario 1) and
- * "long delay" (aka Scenario 3)? I don't think so.
- *
- * We expected timer_interrupt to be delivered at least a few hundred
- * cycles after the IT fires. But it's arbitrary how much time passes
- * before we call it "late". I've picked one second.
- */
- if (unlikely(ticks_elapsed > HZ)) {
- /* Scenario 3: very long delay? bad in any case */
- printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
- " cycles %lX rem %lX "
- " next/now %lX/%lX\n",
- cpu,
- cycles_elapsed, cycles_remainder,
- next_tick, now );
+ ticks_elapsed += cycles_elapsed / cpt;
}
/* convert from "division remainder" to "remainder of clock tick" */
@@ -122,18 +102,56 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
cpuinfo->it_value = next_tick;
- /* Skip one clocktick on purpose if we are likely to miss next_tick.
- * We want to avoid the new next_tick being less than CR16.
- * If that happened, itimer wouldn't fire until CR16 wrapped.
- * We'll catch the tick we missed on the tick after that.
+ /* Program the IT when to deliver the next interrupt.
+ * Only bottom 32-bits of next_tick are writable in CR16!
*/
- if (!(cycles_remainder >> 13))
- next_tick += cpt;
-
- /* Program the IT when to deliver the next interrupt. */
- /* Only bottom 32-bits of next_tick are written to cr16. */
mtctl(next_tick, 16);
+ /* Skip one clocktick on purpose if we missed next_tick.
+ * The new CR16 must be "later" than current CR16 otherwise
+ * itimer would not fire until CR16 wrapped - e.g 4 seconds
+ * later on a 1Ghz processor. We'll account for the missed
+ * tick on the next timer interrupt.
+ *
+ * "next_tick - now" will always give the difference regardless
+ * if one or the other wrapped. If "now" is "bigger" we'll end up
+ * with a very large unsigned number.
+ */
+ now2 = mfctl(16);
+ if (next_tick - now2 > cpt)
+ mtctl(next_tick+cpt, 16);
+
+#if 1
+/*
+ * GGG: DEBUG code for how many cycles programming CR16 used.
+ */
+ if (unlikely(now2 - now > 0x3000)) /* 12K cycles */
+ printk (KERN_CRIT "timer_interrupt(CPU %d): SLOW! 0x%lx cycles!"
+ " cyc %lX rem %lX "
+ " next/now %lX/%lX\n",
+ cpu, now2 - now, cycles_elapsed, cycles_remainder,
+ next_tick, now );
+#endif
+
+ /* Can we differentiate between "early CR16" (aka Scenario 1) and
+ * "long delay" (aka Scenario 3)? I don't think so.
+ *
+ * Timer_interrupt will be delivered at least a few hundred cycles
+ * after the IT fires. But it's arbitrary how much time passes
+ * before we call it "late". I've picked one second.
+ *
+ * It's important NO printk's are between reading CR16 and
+ * setting up the next value. May introduce huge variance.
+ */
+ if (unlikely(ticks_elapsed > HZ)) {
+ /* Scenario 3: very long delay? bad in any case */
+ printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
+ " cycles %lX rem %lX "
+ " next/now %lX/%lX\n",
+ cpu,
+ cycles_elapsed, cycles_remainder,
+ next_tick, now );
+ }
/* Done mucking with unreliable delivery of interrupts.
* Go do system house keeping.
@@ -173,7 +191,7 @@ EXPORT_SYMBOL(profile_pc);
/* clock source code */
-static cycle_t read_cr16(void)
+static cycle_t read_cr16(struct clocksource *cs)
{
return get_cycles();
}
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index c32f5d6d778e..528f0ff9b273 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -250,15 +250,14 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err)
oops_enter();
/* Amuse the user in a SPARC fashion */
- if (err) printk(
-KERN_CRIT " _______________________________ \n"
-KERN_CRIT " < Your System ate a SPARC! Gah! >\n"
-KERN_CRIT " ------------------------------- \n"
-KERN_CRIT " \\ ^__^\n"
-KERN_CRIT " \\ (xx)\\_______\n"
-KERN_CRIT " (__)\\ )\\/\\\n"
-KERN_CRIT " U ||----w |\n"
-KERN_CRIT " || ||\n");
+ if (err) printk(KERN_CRIT
+ " _______________________________ \n"
+ " < Your System ate a SPARC! Gah! >\n"
+ " ------------------------------- \n"
+ " \\ ^__^\n"
+ " (__)\\ )\\/\\\n"
+ " U ||----w |\n"
+ " || ||\n");
/* unlock the pdc lock if necessary */
pdc_emergency_unlock();
@@ -797,7 +796,8 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
else
printk(KERN_DEBUG "User Fault (long pointer) (fault %d) ",
code);
- printk("pid=%d command='%s'\n", task_pid_nr(current), current->comm);
+ printk(KERN_CONT "pid=%d command='%s'\n",
+ task_pid_nr(current), current->comm);
show_regs(regs);
#endif
si.si_signo = SIGSEGV;
diff --git a/arch/parisc/lib/checksum.c b/arch/parisc/lib/checksum.c
index 462696d30d3b..ae66d31f9ecf 100644
--- a/arch/parisc/lib/checksum.c
+++ b/arch/parisc/lib/checksum.c
@@ -13,8 +13,6 @@
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
- *
- * $Id: checksum.c,v 1.3 1997/12/01 17:57:34 ralf Exp $
*/
#include <linux/module.h>
#include <linux/types.h>
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index bbda909c866e..abf41f4632a9 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -405,7 +405,7 @@ byte_copy:
unaligned_copy:
/* possibly we are aligned on a word, but not on a double... */
- if (likely(t1 & (sizeof(unsigned int)-1)) == 0) {
+ if (likely((t1 & (sizeof(unsigned int)-1)) == 0)) {
t2 = src & (sizeof(unsigned int) - 1);
if (unlikely(t2 != 0)) {
diff --git a/arch/parisc/math-emu/decode_exc.c b/arch/parisc/math-emu/decode_exc.c
index 66c8a9f6a27e..3ca1c6149218 100644
--- a/arch/parisc/math-emu/decode_exc.c
+++ b/arch/parisc/math-emu/decode_exc.c
@@ -40,7 +40,7 @@
* END_DESC
*/
-
+#include <linux/kernel.h>
#include "float.h"
#include "sgl_float.h"
#include "dbl_float.h"
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index bfb6dd6ab380..c6afbfc95770 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -1,5 +1,4 @@
-/* $Id: fault.c,v 1.5 2000/01/26 16:20:29 jsm Exp $
- *
+/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 4356ceb1e366..b0831d9e35cb 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -370,34 +370,22 @@ static void __init setup_bootmem(void)
void free_initmem(void)
{
- unsigned long addr, init_begin, init_end;
-
- printk(KERN_INFO "Freeing unused kernel memory: ");
+ unsigned long addr;
+ unsigned long init_begin = (unsigned long)__init_begin;
+ unsigned long init_end = (unsigned long)__init_end;
#ifdef CONFIG_DEBUG_KERNEL
/* Attempt to catch anyone trying to execute code here
* by filling the page with BRK insns.
- *
- * If we disable interrupts for all CPUs, then IPI stops working.
- * Kinda breaks the global cache flushing.
*/
- local_irq_disable();
-
- memset(__init_begin, 0x00,
- (unsigned long)__init_end - (unsigned long)__init_begin);
-
- flush_data_cache();
- asm volatile("sync" : : );
- flush_icache_range((unsigned long)__init_begin, (unsigned long)__init_end);
- asm volatile("sync" : : );
-
- local_irq_enable();
+ memset((void *)init_begin, 0x00, init_end - init_begin);
+ flush_icache_range(init_begin, init_end);
#endif
/* align __init_begin and __init_end to page size,
ignoring linker script where we might have tried to save RAM */
- init_begin = PAGE_ALIGN((unsigned long)(__init_begin));
- init_end = PAGE_ALIGN((unsigned long)(__init_end));
+ init_begin = PAGE_ALIGN(init_begin);
+ init_end = PAGE_ALIGN(init_end);
for (addr = init_begin; addr < init_end; addr += PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
@@ -409,7 +397,8 @@ void free_initmem(void)
/* set up a new led state on systems shipped LED State panel */
pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE);
- printk("%luk freed\n", (init_end - init_begin) >> 10);
+ printk(KERN_INFO "Freeing unused kernel memory: %luk freed\n",
+ (init_end - init_begin) >> 10);
}
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index bf6cedfa05db..d00131ca0835 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -62,7 +62,6 @@ config HAVE_LATENCYTOP_SUPPORT
config TRACE_IRQFLAGS_SUPPORT
bool
- depends on PPC64
default y
config LOCKDEP_SUPPORT
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 2f50acd11a60..3d80c3e9cf60 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -36,3 +36,13 @@ zImage.pseries
zconf.h
zlib.h
zutil.h
+fdt.c
+fdt.h
+fdt_ro.c
+fdt_rw.c
+fdt_strerror.c
+fdt_sw.c
+fdt_wip.c
+libfdt.h
+libfdt_internal.h
+
diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts
index 26549fca2ed4..49ac36b16dd7 100644
--- a/arch/powerpc/boot/dts/amigaone.dts
+++ b/arch/powerpc/boot/dts/amigaone.dts
@@ -70,8 +70,8 @@
devsel-speed = <0x00000001>;
min-grant = <0>;
max-latency = <0>;
- /* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
- ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>;
+ /* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
+ ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
interrupt-parent = <&i8259>;
#interrupt-cells = <2>;
#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index a8dcb018c4a5..a680165292f2 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -253,6 +253,7 @@
/* Filled in by U-Boot */
clock-frequency = <0>;
status = "disabled";
+ sdhci,1-bit-only;
};
crypto@30000 {
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index 01bfb56bbe80..31605ee4afb6 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -261,10 +261,11 @@
compatible = "gpio-leds";
green {
gpios = <&GPIO1 0 0>;
- default-state = "on";
+ default-state = "keep";
};
red {
gpios = <&GPIO1 1 0>;
+ default-state = "keep";
};
};
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 3b77f092abe1..787635f23d8f 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Fri Jan 23 07:57:16 2009
+# Linux kernel version: 2.6.30
+# Tue Jun 9 23:35:36 2009
#
# CONFIG_PPC64 is not set
@@ -41,6 +41,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
@@ -53,10 +54,12 @@ CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -74,7 +77,17 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
@@ -82,27 +95,29 @@ CONFIG_FAIR_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -110,10 +125,13 @@ CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -121,6 +139,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -133,7 +152,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -149,11 +167,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -173,10 +186,11 @@ CONFIG_WARP=y
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
# CONFIG_PPC44x_SIMPLE is not set
-# CONFIG_PPC4xx_GPIO is not set
+CONFIG_PPC4xx_GPIO=y
CONFIG_440EP=y
CONFIG_IBM440EP_ERR42=y
# CONFIG_IPIC is not set
@@ -235,9 +249,13 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
@@ -256,6 +274,7 @@ CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
# CONFIG_HAS_RAPIDIO is not set
#
@@ -271,14 +290,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -353,6 +370,7 @@ CONFIG_VLAN_8021Q=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -365,7 +383,6 @@ CONFIG_VLAN_8021Q=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -378,8 +395,12 @@ CONFIG_VLAN_8021Q=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -471,13 +492,21 @@ CONFIG_MTD_NAND_NDFC=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
#
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
@@ -495,10 +524,17 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_XILINX_SYSACE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -529,7 +565,7 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SCSI_WAIT_SCAN is not set
#
# SCSI Transports
@@ -541,10 +577,12 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -554,6 +592,8 @@ CONFIG_NETDEVICES=y
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
CONFIG_IBM_NEW_EMAC=y
CONFIG_IBM_NEW_EMAC_RXB=128
CONFIG_IBM_NEW_EMAC_TXB=64
@@ -577,7 +617,6 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -646,6 +685,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
@@ -663,6 +703,7 @@ CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IBM_IIC=y
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
@@ -685,12 +726,9 @@ CONFIG_I2C_IBM_IIC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -699,7 +737,30 @@ CONFIG_EEPROM_LEGACY=y
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -721,6 +782,7 @@ CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -735,11 +797,15 @@ CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
@@ -785,6 +851,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
@@ -870,11 +937,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -915,7 +982,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -929,6 +995,8 @@ CONFIG_USB_STORAGE=y
#
# OTG and related infrastructure
#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -946,6 +1014,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
+CONFIG_MMC_PIKASD=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -953,16 +1022,31 @@ CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_GPIO_PLATFORM is not set
+CONFIG_LEDS_GPIO_OF=y
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
-# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -973,6 +1057,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
@@ -993,6 +1078,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1039,6 +1129,12 @@ CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1049,6 +1145,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1060,7 +1157,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1115,6 +1211,7 @@ CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1122,7 +1219,7 @@ CONFIG_NLS_UTF8=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
@@ -1130,16 +1227,19 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
#
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
@@ -1152,11 +1252,15 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1180,9 +1284,12 @@ CONFIG_DEBUG_INFO=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1190,24 +1297,27 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
CONFIG_IRQSTACKS=y
# CONFIG_VIRQ_DEBUG is not set
-CONFIG_BDI_SWITCH=y
+# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1223,6 +1333,8 @@ CONFIG_CRYPTO=y
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
@@ -1294,13 +1406,15 @@ CONFIG_CRYPTO=y
#
# Compression
#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 2ff798744c1d..7685ffde8821 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -598,8 +598,6 @@ typedef struct risc_timer_pram {
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-#define IMAP_ADDR (get_immrbase())
-
#define CPM_PIN_INPUT 0
#define CPM_PIN_OUTPUT 1
#define CPM_PIN_PRIMARY 0
diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h
index 1e2eb41fa057..52e4d54da2a9 100644
--- a/arch/powerpc/include/asm/delay.h
+++ b/arch/powerpc/include/asm/delay.h
@@ -63,6 +63,8 @@ extern void udelay(unsigned long usecs);
udelay(delay); \
else \
cpu_relax(); \
+ if (!__ret) \
+ __ret = (condition); \
__ret; \
})
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 3d9e887c3c0c..b44aaabdd1a6 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -309,7 +309,9 @@ static inline void dma_sync_single_for_cpu(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
+
+ if (dma_ops->sync_single_range_for_cpu)
+ dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
size, direction);
}
@@ -320,7 +322,9 @@ static inline void dma_sync_single_for_device(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_device(dev, dma_handle,
+
+ if (dma_ops->sync_single_range_for_device)
+ dma_ops->sync_single_range_for_device(dev, dma_handle,
0, size, direction);
}
@@ -331,7 +335,9 @@ static inline void dma_sync_sg_for_cpu(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
+
+ if (dma_ops->sync_sg_for_cpu)
+ dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
}
static inline void dma_sync_sg_for_device(struct device *dev,
@@ -341,7 +347,9 @@ static inline void dma_sync_sg_for_device(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
+
+ if (dma_ops->sync_sg_for_device)
+ dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
}
static inline void dma_sync_single_range_for_cpu(struct device *dev,
@@ -351,7 +359,9 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_cpu(dev, dma_handle,
+
+ if (dma_ops->sync_single_range_for_cpu)
+ dma_ops->sync_single_range_for_cpu(dev, dma_handle,
offset, size, direction);
}
@@ -362,7 +372,9 @@ static inline void dma_sync_single_range_for_device(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
+
+ if (dma_ops->sync_single_range_for_device)
+ dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
size, direction);
}
#else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index 684a73f4324f..a74c4ee6c020 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -22,9 +22,7 @@
#ifdef __KERNEL__
-#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/highmem.h>
#include <asm/kmap_types.h>
#include <asm/tlbflush.h>
#include <asm/page.h>
@@ -62,6 +60,9 @@ extern pte_t *pkmap_page_table;
extern void *kmap_high(struct page *page);
extern void kunmap_high(struct page *page);
+extern void *kmap_atomic_prot(struct page *page, enum km_type type,
+ pgprot_t prot);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
static inline void *kmap(struct page *page)
{
@@ -79,62 +80,11 @@ static inline void kunmap(struct page *page)
kunmap_high(page);
}
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
-{
- unsigned int idx;
- unsigned long vaddr;
-
- /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
- pagefault_disable();
- if (!PageHighMem(page))
- return page_address(page);
-
- debug_kmap_atomic(type);
- idx = type + KM_TYPE_NR*smp_processor_id();
- vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#ifdef CONFIG_DEBUG_HIGHMEM
- BUG_ON(!pte_none(*(kmap_pte-idx)));
-#endif
- __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
- local_flush_tlb_page(NULL, vaddr);
-
- return (void*) vaddr;
-}
-
static inline void *kmap_atomic(struct page *page, enum km_type type)
{
return kmap_atomic_prot(page, type, kmap_prot);
}
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
-#ifdef CONFIG_DEBUG_HIGHMEM
- unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
- enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
-
- if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
- pagefault_enable();
- return;
- }
-
- BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-
- /*
- * force other mappings to Oops if they'll try to access
- * this pte without first remap it
- */
- pte_clear(&init_mm, vaddr, kmap_pte-idx);
- local_flush_tlb_page(NULL, vaddr);
-#endif
- pagefault_enable();
-}
-
static inline struct page *kmap_atomic_to_page(void *ptr)
{
unsigned long idx, vaddr = (unsigned long) ptr;
@@ -148,6 +98,7 @@ static inline struct page *kmap_atomic_to_page(void *ptr)
return pte_page(*pte);
}
+
#define flush_cache_kmaps() flush_cache_all()
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 867ab8ed69b3..8b505eaaa38a 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -68,13 +68,13 @@ static inline int irqs_disabled_flags(unsigned long flags)
#if defined(CONFIG_BOOKE)
#define SET_MSR_EE(x) mtmsr(x)
-#define local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
+#define raw_local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
#else
#define SET_MSR_EE(x) mtmsr(x)
-#define local_irq_restore(flags) mtmsr(flags)
+#define raw_local_irq_restore(flags) mtmsr(flags)
#endif
-static inline void local_irq_disable(void)
+static inline void raw_local_irq_disable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 0": : :"memory");
@@ -86,7 +86,7 @@ static inline void local_irq_disable(void)
#endif
}
-static inline void local_irq_enable(void)
+static inline void raw_local_irq_enable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 1": : :"memory");
@@ -98,7 +98,7 @@ static inline void local_irq_enable(void)
#endif
}
-static inline void local_irq_save_ptr(unsigned long *flags)
+static inline void raw_local_irq_save_ptr(unsigned long *flags)
{
unsigned long msr;
msr = mfmsr();
@@ -110,12 +110,12 @@ static inline void local_irq_save_ptr(unsigned long *flags)
#endif
}
-#define local_save_flags(flags) ((flags) = mfmsr())
-#define local_irq_save(flags) local_irq_save_ptr(&flags)
-#define irqs_disabled() ((mfmsr() & MSR_EE) == 0)
+#define raw_local_save_flags(flags) ((flags) = mfmsr())
+#define raw_local_irq_save(flags) raw_local_irq_save_ptr(&flags)
+#define raw_irqs_disabled() ((mfmsr() & MSR_EE) == 0)
+#define raw_irqs_disabled_flags(flags) (((flags) & MSR_EE) == 0)
-#define hard_irq_enable() local_irq_enable()
-#define hard_irq_disable() local_irq_disable()
+#define hard_irq_disable() raw_local_irq_disable()
static inline int irqs_disabled_flags(unsigned long flags)
{
diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h
index 8ccd4e155768..0ea0639fcf75 100644
--- a/arch/powerpc/include/asm/perf_counter.h
+++ b/arch/powerpc/include/asm/perf_counter.h
@@ -61,6 +61,8 @@ struct pt_regs;
extern unsigned long perf_misc_flags(struct pt_regs *regs);
extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
+#define PERF_COUNTER_INDEX_OFFSET 1
+
/*
* Only override the default definitions in include/linux/perf_counter.h
* if we have hardware PMU support.
diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
index e05d26fa372f..82b72207c51c 100644
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -47,7 +47,8 @@
* generic accessors and iterators here
*/
#define __real_pte(e,p) ((real_pte_t) { \
- (e), pte_val(*((p) + PTRS_PER_PTE)) })
+ (e), ((e) & _PAGE_COMBO) ? \
+ (pte_val(*((p) + PTRS_PER_PTE))) : 0 })
#define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \
(((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
#define __rpte_to_pte(r) ((r).pte)
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 01c12339b304..168fce726201 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -58,7 +58,7 @@ struct rtas_t {
unsigned long entry; /* physical address pointer */
unsigned long base; /* physical address pointer */
unsigned long size;
- spinlock_t lock;
+ raw_spinlock_t lock;
struct rtas_args args;
struct device_node *dev; /* virtual address pointer */
};
@@ -245,5 +245,8 @@ static inline u32 rtas_config_addr(int busno, int devfn, int reg)
(devfn << 8) | (reg & 0xff);
}
+extern void __cpuinit rtas_give_timebase(void);
+extern void __cpuinit rtas_take_timebase(void);
+
#endif /* __KERNEL__ */
#endif /* _POWERPC_RTAS_H */
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 9aba5a38a7c4..c8b329255678 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -46,15 +46,13 @@ struct thread_info {
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#define INIT_THREAD_INFO(tsk) \
{ \
.task = &tsk, \
.exec_domain = &default_exec_domain, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 4dd38f129153..3cadba60a4b6 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -191,11 +191,49 @@ transfer_to_handler_cont:
mflr r9
lwz r11,0(r9) /* virtual address of handler */
lwz r9,4(r9) /* where to go when done */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ lis r12,reenable_mmu@h
+ ori r12,r12,reenable_mmu@l
+ mtspr SPRN_SRR0,r12
+ mtspr SPRN_SRR1,r10
+ SYNC
+ RFI
+reenable_mmu: /* re-enable mmu so we can */
+ mfmsr r10
+ lwz r12,_MSR(r1)
+ xor r10,r10,r12
+ andi. r10,r10,MSR_EE /* Did EE change? */
+ beq 1f
+
+ /* Save handler and return address into the 2 unused words
+ * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
+ * else can be recovered from the pt_regs except r3 which for
+ * normal interrupts has been set to pt_regs and for syscalls
+ * is an argument, so we temporarily use ORIG_GPR3 to save it
+ */
+ stw r9,8(r1)
+ stw r11,12(r1)
+ stw r3,ORIG_GPR3(r1)
+ bl trace_hardirqs_off
+ lwz r0,GPR0(r1)
+ lwz r3,ORIG_GPR3(r1)
+ lwz r4,GPR4(r1)
+ lwz r5,GPR5(r1)
+ lwz r6,GPR6(r1)
+ lwz r7,GPR7(r1)
+ lwz r8,GPR8(r1)
+ lwz r9,8(r1)
+ lwz r11,12(r1)
+1: mtctr r11
+ mtlr r9
+ bctr /* jump to handler */
+#else /* CONFIG_TRACE_IRQFLAGS */
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r10
mtlr r9
SYNC
RFI /* jump to handler, enable MMU */
+#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined (CONFIG_6xx) || defined(CONFIG_E500)
4: rlwinm r12,r12,0,~_TLF_NAPPING
@@ -251,6 +289,31 @@ _GLOBAL(DoSyscall)
#ifdef SHOW_SYSCALLS
bl do_show_syscall
#endif /* SHOW_SYSCALLS */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Return from syscalls can (and generally will) hard enable
+ * interrupts. You aren't supposed to call a syscall with
+ * interrupts disabled in the first place. However, to ensure
+ * that we get it right vs. lockdep if it happens, we force
+ * that hard enable here with appropriate tracing if we see
+ * that we have been called with interrupts off
+ */
+ mfmsr r11
+ andi. r12,r11,MSR_EE
+ bne+ 1f
+ /* We came in with interrupts disabled, we enable them now */
+ bl trace_hardirqs_on
+ mfmsr r11
+ lwz r0,GPR0(r1)
+ lwz r3,GPR3(r1)
+ lwz r4,GPR4(r1)
+ ori r11,r11,MSR_EE
+ lwz r5,GPR5(r1)
+ lwz r6,GPR6(r1)
+ lwz r7,GPR7(r1)
+ lwz r8,GPR8(r1)
+ mtmsr r11
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
rlwinm r10,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
lwz r11,TI_FLAGS(r10)
andi. r11,r11,_TIF_SYSCALL_T_OR_A
@@ -275,6 +338,7 @@ ret_from_syscall:
rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
/* disable interrupts so current_thread_info()->flags can't change */
LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
+ /* Note: We don't bother telling lockdep about it */
SYNC
MTMSRD(r10)
lwz r9,TI_FLAGS(r12)
@@ -288,6 +352,19 @@ ret_from_syscall:
oris r11,r11,0x1000 /* Set SO bit in CR */
stw r11,_CCR(r1)
syscall_exit_cont:
+ lwz r8,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* If we are going to return from the syscall with interrupts
+ * off, we trace that here. It shouldn't happen though but we
+ * want to catch the bugger if it does right ?
+ */
+ andi. r10,r8,MSR_EE
+ bne+ 1f
+ stw r3,GPR3(r1)
+ bl trace_hardirqs_off
+ lwz r3,GPR3(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
/* If the process has its own DBCR0 value, load it up. The internal
debug mode bit tells us that dbcr0 should be loaded. */
@@ -311,7 +388,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
mtlr r4
mtcr r5
lwz r7,_NIP(r1)
- lwz r8,_MSR(r1)
FIX_SRR1(r8, r0)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
@@ -394,7 +470,9 @@ syscall_exit_work:
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
beq ret_from_except
- /* Re-enable interrupts */
+ /* Re-enable interrupts. There is no need to trace that with
+ * lockdep as we are supposed to have IRQs on at this point
+ */
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10)
@@ -705,6 +783,7 @@ ret_from_except:
/* Hard-disable interrupts so that current_thread_info()->flags
* can't change between when we test it and when we return
* from the interrupt. */
+ /* Note: We don't bother telling lockdep about it */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC /* Some chip revs have problems here... */
MTMSRD(r10) /* disable interrupts */
@@ -744,11 +823,24 @@ resume_kernel:
beq+ restore
andi. r0,r3,MSR_EE /* interrupts off? */
beq restore /* don't schedule if so */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Lockdep thinks irqs are enabled, we need to call
+ * preempt_schedule_irq with IRQs off, so we inform lockdep
+ * now that we -did- turn them off already
+ */
+ bl trace_hardirqs_off
+#endif
1: bl preempt_schedule_irq
rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
lwz r3,TI_FLAGS(r9)
andi. r0,r3,_TIF_NEED_RESCHED
bne- 1b
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* And now, to properly rebalance the above, we tell lockdep they
+ * are being turned back on, which will happen when we return
+ */
+ bl trace_hardirqs_on
+#endif
#else
resume_kernel:
#endif /* CONFIG_PREEMPT */
@@ -765,6 +857,28 @@ restore:
stw r6,icache_44x_need_flush@l(r4)
1:
#endif /* CONFIG_44x */
+
+ lwz r9,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Lockdep doesn't know about the fact that IRQs are temporarily turned
+ * off in this assembly code while peeking at TI_FLAGS() and such. However
+ * we need to inform it if the exception turned interrupts off, and we
+ * are about to trun them back on.
+ *
+ * The problem here sadly is that we don't know whether the exceptions was
+ * one that turned interrupts off or not. So we always tell lockdep about
+ * turning them on here when we go back to wherever we came from with EE
+ * on, even if that may meen some redudant calls being tracked. Maybe later
+ * we could encode what the exception did somewhere or test the exception
+ * type in the pt_regs but that sounds overkill
+ */
+ andi. r10,r9,MSR_EE
+ beq 1f
+ bl trace_hardirqs_on
+ lwz r9,_MSR(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
+
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
REST_4GPRS(3, r1)
@@ -782,7 +896,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
stwcx. r0,0,r1 /* to clear the reservation */
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
- lwz r9,_MSR(r1)
andi. r10,r9,MSR_RI /* check if this exception occurred */
beql nonrecoverable /* at a bad place (MSR:RI = 0) */
@@ -805,7 +918,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
MTMSRD(r10) /* clear the RI bit */
.globl exc_exit_restart
exc_exit_restart:
- lwz r9,_MSR(r1)
lwz r12,_NIP(r1)
FIX_SRR1(r9,r10)
mtspr SPRN_SRR0,r12
@@ -1035,11 +1147,18 @@ do_work: /* r10 contains MSR_KERNEL here */
beq do_user_signal
do_resched: /* r10 contains MSR_KERNEL here */
+ /* Note: We don't need to inform lockdep that we are enabling
+ * interrupts here. As far as it knows, they are already enabled
+ */
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10) /* hard-enable interrupts */
bl schedule
recheck:
+ /* Note: And we don't tell it we are disabling them again
+ * neither. Those disable/enable cycles used to peek at
+ * TI_FLAGS aren't advertised.
+ */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC
MTMSRD(r10) /* disable interrupts */
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 48469463f89e..fc2132942754 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -1124,9 +1124,8 @@ mmu_off:
RFI
/*
- * Use the first pair of BAT registers to map the 1st 16MB
- * of RAM to PAGE_OFFSET. From this point on we can't safely
- * call OF any more.
+ * On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET
+ * (we keep one for debugging) and on others, we use one 256M BAT.
*/
initial_bats:
lis r11,PAGE_OFFSET@h
@@ -1136,12 +1135,16 @@ initial_bats:
bne 4f
ori r11,r11,4 /* set up BAT registers for 601 */
li r8,0x7f /* valid, block length = 8MB */
- oris r9,r11,0x800000@h /* set up BAT reg for 2nd 8M */
- oris r10,r8,0x800000@h /* set up BAT reg for 2nd 8M */
mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */
mtspr SPRN_IBAT0L,r8 /* lower BAT register */
- mtspr SPRN_IBAT1U,r9
- mtspr SPRN_IBAT1L,r10
+ addis r11,r11,0x800000@h
+ addis r8,r8,0x800000@h
+ mtspr SPRN_IBAT1U,r11
+ mtspr SPRN_IBAT1L,r8
+ addis r11,r11,0x800000@h
+ addis r8,r8,0x800000@h
+ mtspr SPRN_IBAT2U,r11
+ mtspr SPRN_IBAT2L,r8
isync
blr
diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c
index 75ff47fed7bf..c244133c67a6 100644
--- a/arch/powerpc/kernel/mpc7450-pmu.c
+++ b/arch/powerpc/kernel/mpc7450-pmu.c
@@ -10,7 +10,6 @@
*/
#include <linux/string.h>
#include <linux/perf_counter.h>
-#include <linux/string.h>
#include <asm/reg.h>
#include <asm/cputable.h>
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index fa983a59c4ce..a359cb08e900 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -76,7 +76,7 @@ struct of_device *of_device_alloc(struct device_node *np,
dev->dev.archdata.of_node = np;
if (bus_id)
- dev_set_name(&dev->dev, bus_id);
+ dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(dev);
diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index 5d755ef7ac8f..5a9f5cbd40a4 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -358,6 +358,7 @@ static struct power_pmu power7_pmu = {
.get_constraint = power7_get_constraint,
.get_alternatives = power7_get_alternatives,
.disable_pmc = power7_disable_pmc,
+ .flags = PPMU_ALT_SIPR,
.n_generic = ARRAY_SIZE(power7_generic_events),
.generic_events = power7_generic_events,
.cache_events = &power7_cache_events,
diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c
index 6637c87fe70e..833097ac45dc 100644
--- a/arch/powerpc/kernel/ppc970-pmu.c
+++ b/arch/powerpc/kernel/ppc970-pmu.c
@@ -10,7 +10,6 @@
*/
#include <linux/string.h>
#include <linux/perf_counter.h>
-#include <linux/string.h>
#include <asm/reg.h>
#include <asm/cputable.h>
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 3e7135bbe40f..892a9f2e6d76 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -528,7 +528,7 @@ void show_regs(struct pt_regs * regs)
for (i = 0; i < 32; i++) {
if ((i % REGS_PER_LINE) == 0)
- printk("\n" KERN_INFO "GPR%02d: ", i);
+ printk("\nGPR%02d: ", i);
printk(REG " ", regs->gpr[i]);
if (i == LAST_VOLATILE && !FULL_REGS(regs))
break;
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index ee4c7609b649..c434823b8c83 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -38,9 +38,10 @@
#include <asm/syscalls.h>
#include <asm/smp.h>
#include <asm/atomic.h>
+#include <asm/time.h>
struct rtas_t rtas = {
- .lock = SPIN_LOCK_UNLOCKED
+ .lock = __RAW_SPIN_LOCK_UNLOCKED
};
EXPORT_SYMBOL(rtas);
@@ -67,6 +68,28 @@ unsigned long rtas_rmo_buf;
void (*rtas_flash_term_hook)(int);
EXPORT_SYMBOL(rtas_flash_term_hook);
+/* RTAS use home made raw locking instead of spin_lock_irqsave
+ * because those can be called from within really nasty contexts
+ * such as having the timebase stopped which would lockup with
+ * normal locks and spinlock debugging enabled
+ */
+static unsigned long lock_rtas(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ preempt_disable();
+ __raw_spin_lock_flags(&rtas.lock, flags);
+ return flags;
+}
+
+static void unlock_rtas(unsigned long flags)
+{
+ __raw_spin_unlock(&rtas.lock);
+ local_irq_restore(flags);
+ preempt_enable();
+}
+
/*
* call_rtas_display_status and call_rtas_display_status_delay
* are designed only for very early low-level debugging, which
@@ -79,7 +102,7 @@ static void call_rtas_display_status(char c)
if (!rtas.base)
return;
- spin_lock_irqsave(&rtas.lock, s);
+ s = lock_rtas();
args->token = 10;
args->nargs = 1;
@@ -89,7 +112,7 @@ static void call_rtas_display_status(char c)
enter_rtas(__pa(args));
- spin_unlock_irqrestore(&rtas.lock, s);
+ unlock_rtas(s);
}
static void call_rtas_display_status_delay(char c)
@@ -411,8 +434,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE)
return -1;
- /* Gotta do something different here, use global lock for now... */
- spin_lock_irqsave(&rtas.lock, s);
+ s = lock_rtas();
rtas_args = &rtas.args;
rtas_args->token = token;
@@ -439,8 +461,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
outputs[i] = rtas_args->rets[i+1];
ret = (nret > 0)? rtas_args->rets[0]: 0;
- /* Gotta do something different here, use global lock for now... */
- spin_unlock_irqrestore(&rtas.lock, s);
+ unlock_rtas(s);
if (buff_copy) {
log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0);
@@ -837,7 +858,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
buff_copy = get_errorlog_buffer();
- spin_lock_irqsave(&rtas.lock, flags);
+ flags = lock_rtas();
rtas.args = args;
enter_rtas(__pa(&rtas.args));
@@ -848,7 +869,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
if (args.rets[0] == -1)
errbuf = __fetch_rtas_last_error(buff_copy);
- spin_unlock_irqrestore(&rtas.lock, flags);
+ unlock_rtas(flags);
if (buff_copy) {
if (errbuf)
@@ -951,3 +972,33 @@ int __init early_init_dt_scan_rtas(unsigned long node,
/* break now */
return 1;
}
+
+static raw_spinlock_t timebase_lock;
+static u64 timebase = 0;
+
+void __cpuinit rtas_give_timebase(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ hard_irq_disable();
+ __raw_spin_lock(&timebase_lock);
+ rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
+ timebase = get_tb();
+ __raw_spin_unlock(&timebase_lock);
+
+ while (timebase)
+ barrier();
+ rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
+ local_irq_restore(flags);
+}
+
+void __cpuinit rtas_take_timebase(void)
+{
+ while (!timebase)
+ barrier();
+ __raw_spin_lock(&timebase_lock);
+ set_tb(timebase >> 32, timebase & 0xffffffff);
+ timebase = 0;
+ __raw_spin_unlock(&timebase_lock);
+}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 1d154248cf40..e1e3059cf34b 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -119,6 +119,8 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
*/
notrace void __init machine_init(unsigned long dt_ptr)
{
+ lockdep_init();
+
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 65484b2200b3..0b47de07302d 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -68,7 +68,8 @@ EXPORT_PER_CPU_SYMBOL(cpu_core_map);
/* SMP operations for this machine */
struct smp_ops_t *smp_ops;
-static volatile unsigned int cpu_callin_map[NR_CPUS];
+/* Can't be static due to PowerMac hackery */
+volatile unsigned int cpu_callin_map[NR_CPUS];
int smt_enabled_at_boot = 1;
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 0362a891e54e..acb74a17bbbf 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -219,7 +219,7 @@ void udbg_init_pas_realmode(void)
#ifdef CONFIG_PPC_EARLY_DEBUG_44x
#include <platforms/44x/44x.h>
-static int udbg_44x_as1_flush(void)
+static void udbg_44x_as1_flush(void)
{
if (udbg_comport) {
while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 2d2192e48de7..3e68363405b7 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_PPC_MM_SLICES) += slice.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
+obj-$(CONFIG_HIGHMEM) += highmem.o
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index bc400c78c97f..bc122a120bf0 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -159,7 +159,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
int psize;
#endif
- pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+ pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
start &= PAGE_MASK;
addr = start;
@@ -170,7 +170,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
start, len)))
goto slow_irqon;
- pr_debug(" aligned: %lx .. %lx\n", start, end);
+ pr_devel(" aligned: %lx .. %lx\n", start, end);
#ifdef CONFIG_HUGETLB_PAGE
/* We bail out on slice boundary crossing when hugetlb is
@@ -234,7 +234,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
do {
VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
ptep = huge_pte_offset(mm, a);
- pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+ pr_devel(" %016lx: huge ptep %p\n", a, ptep);
if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
&nr))
goto slow;
@@ -249,7 +249,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
#ifdef CONFIG_PPC64
VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
#endif
- pr_debug(" %016lx: normal pgd %p\n", addr,
+ pr_devel(" %016lx: normal pgd %p\n", addr,
(void *)pgd_val(pgd));
next = pgd_addr_end(addr, end);
if (pgd_none(pgd))
@@ -269,7 +269,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
slow:
local_irq_enable();
slow_irqon:
- pr_debug(" slow path ! nr = %d\n", nr);
+ pr_devel(" slow path ! nr = %d\n", nr);
/* Try to get the remaining pages with get_user_pages */
start += nr << PAGE_SHIFT;
diff --git a/arch/powerpc/mm/highmem.c b/arch/powerpc/mm/highmem.c
new file mode 100644
index 000000000000..c2186c74c85a
--- /dev/null
+++ b/arch/powerpc/mm/highmem.c
@@ -0,0 +1,77 @@
+/*
+ * highmem.c: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ * Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ *
+ * Reworked for PowerPC by various contributors. Moved from
+ * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp.
+ */
+
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
+{
+ unsigned int idx;
+ unsigned long vaddr;
+
+ /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+ pagefault_disable();
+ if (!PageHighMem(page))
+ return page_address(page);
+
+ debug_kmap_atomic(type);
+ idx = type + KM_TYPE_NR*smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ BUG_ON(!pte_none(*(kmap_pte-idx)));
+#endif
+ __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
+ local_flush_tlb_page(NULL, vaddr);
+
+ return (void*) vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic_prot);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+ unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+ enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+ if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
+ pagefault_enable();
+ return;
+ }
+
+ BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+
+ /*
+ * force other mappings to Oops if they'll try to access
+ * this pte without first remap it
+ */
+ pte_clear(&init_mm, vaddr, kmap_pte-idx);
+ local_flush_tlb_page(NULL, vaddr);
+#endif
+ pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 8343986809c0..92a197117d5b 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -89,7 +89,7 @@ static unsigned int steal_context_smp(unsigned int id)
id = first_context;
continue;
}
- pr_debug("[%d] steal context %d from mm @%p\n",
+ pr_devel("[%d] steal context %d from mm @%p\n",
smp_processor_id(), id, mm);
/* Mark this mm has having no context anymore */
@@ -126,7 +126,7 @@ static unsigned int steal_context_up(unsigned int id)
/* Pick up the victim mm */
mm = context_mm[id];
- pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm);
+ pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm);
/* Flush the TLB for that context */
local_flush_tlb_mm(mm);
@@ -180,7 +180,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
spin_lock(&context_lock);
#ifndef DEBUG_STEAL_ONLY
- pr_debug("[%d] activating context for mm @%p, active=%d, id=%d\n",
+ pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n",
cpu, next, next->context.active, next->context.id);
#endif
@@ -189,7 +189,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
next->context.active++;
if (prev) {
#ifndef DEBUG_STEAL_ONLY
- pr_debug(" old context %p active was: %d\n",
+ pr_devel(" old context %p active was: %d\n",
prev, prev->context.active);
#endif
WARN_ON(prev->context.active < 1);
@@ -236,7 +236,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
next->context.id = id;
#ifndef DEBUG_STEAL_ONLY
- pr_debug("[%d] picked up new id %d, nrf is now %d\n",
+ pr_devel("[%d] picked up new id %d, nrf is now %d\n",
cpu, id, nr_free_contexts);
#endif
@@ -247,7 +247,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
* local TLB for it and unmark it before we use it
*/
if (test_bit(id, stale_map[cpu])) {
- pr_debug("[%d] flushing stale context %d for mm @%p !\n",
+ pr_devel("[%d] flushing stale context %d for mm @%p !\n",
cpu, id, next);
local_flush_tlb_mm(next);
@@ -314,13 +314,13 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
- pr_debug("MMU: Allocating stale context map for CPU %d\n", cpu);
+ pr_devel("MMU: Allocating stale context map for CPU %d\n", cpu);
stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL);
break;
#ifdef CONFIG_HOTPLUG_CPU
case CPU_DEAD:
case CPU_DEAD_FROZEN:
- pr_debug("MMU: Freeing stale context map for CPU %d\n", cpu);
+ pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
kfree(stale_map[cpu]);
stale_map[cpu] = NULL;
break;
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index ae1d67cc090c..627767d6169b 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -129,12 +129,12 @@ static pte_t do_dcache_icache_coherency(pte_t pte)
page = pfn_to_page(pfn);
if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) {
- pr_debug("do_dcache_icache_coherency... flushing\n");
+ pr_devel("do_dcache_icache_coherency... flushing\n");
flush_dcache_icache_page(page);
set_bit(PG_arch_1, &page->flags);
}
else
- pr_debug("do_dcache_icache_coherency... already clean\n");
+ pr_devel("do_dcache_icache_coherency... already clean\n");
return __pte(pte_val(pte) | _PAGE_HWEXEC);
}
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 3b52c80e5e33..5b7038f248b6 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -14,8 +14,6 @@
* 2 of the License, or (at your option) any later version.
*/
-#undef DEBUG
-
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/mmu_context.h>
@@ -27,11 +25,6 @@
#include <linux/compiler.h>
#include <asm/udbg.h>
-#ifdef DEBUG
-#define DBG(fmt...) printk(fmt)
-#else
-#define DBG pr_debug
-#endif
extern void slb_allocate_realmode(unsigned long ea);
extern void slb_allocate_user(unsigned long ea);
@@ -285,13 +278,13 @@ void slb_initialize(void)
patch_slb_encoding(slb_compare_rr_to_size,
mmu_slb_size);
- DBG("SLB: linear LLP = %04lx\n", linear_llp);
- DBG("SLB: io LLP = %04lx\n", io_llp);
+ pr_devel("SLB: linear LLP = %04lx\n", linear_llp);
+ pr_devel("SLB: io LLP = %04lx\n", io_llp);
#ifdef CONFIG_SPARSEMEM_VMEMMAP
patch_slb_encoding(slb_miss_kernel_load_vmemmap,
SLB_VSID_KERNEL | vmemmap_llp);
- DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
+ pr_devel("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
#endif
}
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 1be1b5e59796..937eb90677d9 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -72,7 +72,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
*/
if (huge) {
#ifdef CONFIG_HUGETLB_PAGE
- psize = get_slice_psize(mm, addr);;
+ psize = get_slice_psize(mm, addr);
#else
BUG();
psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index 258fa4411e9e..c591339daf58 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -185,7 +185,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
goto fail;
if (shdr_str.sh_type != SHT_STRTAB)
- goto fail;;
+ goto fail;
for (j = 0; j < shdr.sh_size / sizeof (sym); j++) {
if (copy_from_user(&sym, spu_elf_start +
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 42e09a9f77e2..e5c1b096c3e1 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -16,6 +16,7 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/of_gpio.h>
+#include <linux/of_i2c.h>
#include <asm/machdep.h>
#include <asm/prom.h>
@@ -63,9 +64,6 @@ define_machine(warp) {
};
-static u32 post_info;
-
-/* I am not sure this is the best place for this... */
static int __init warp_post_info(void)
{
struct device_node *np;
@@ -87,10 +85,9 @@ static int __init warp_post_info(void)
iounmap(fpga);
- if (post1 || post2) {
+ if (post1 || post2)
printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
- post_info = 1;
- } else
+ else
printk(KERN_INFO "Warp POST OK\n");
return 0;
@@ -166,6 +163,9 @@ static irqreturn_t temp_isr(int irq, void *context)
value ^= 1;
mdelay(500);
}
+
+ /* Not reached */
+ return IRQ_HANDLED;
}
static int pika_setup_leds(void)
@@ -179,24 +179,19 @@ static int pika_setup_leds(void)
}
for_each_child_of_node(np, child)
- if (strcmp(child->name, "green") == 0) {
+ if (strcmp(child->name, "green") == 0)
green_led = of_get_gpio(child, 0);
- /* Turn back on the green LED */
- gpio_set_value(green_led, 1);
- } else if (strcmp(child->name, "red") == 0) {
+ else if (strcmp(child->name, "red") == 0)
red_led = of_get_gpio(child, 0);
- /* Set based on post */
- gpio_set_value(red_led, post_info);
- }
of_node_put(np);
return 0;
}
-static void pika_setup_critical_temp(struct i2c_client *client)
+static void pika_setup_critical_temp(struct device_node *np,
+ struct i2c_client *client)
{
- struct device_node *np;
int irq, rc;
/* Do this before enabling critical temp interrupt since we
@@ -208,14 +203,7 @@ static void pika_setup_critical_temp(struct i2c_client *client)
i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
i2c_smbus_write_byte_data(client, 3, 0); /* Tlow */
- np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
- if (np == NULL) {
- printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
- return;
- }
-
irq = irq_of_parse_and_map(np, 0);
- of_node_put(np);
if (irq == NO_IRQ) {
printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
return;
@@ -244,32 +232,24 @@ static inline void pika_dtm_check_fan(void __iomem *fpga)
static int pika_dtm_thread(void __iomem *fpga)
{
- struct i2c_adapter *adap;
+ struct device_node *np;
struct i2c_client *client;
- /* We loop in case either driver was compiled as a module and
- * has not been insmoded yet.
- */
- while (!(adap = i2c_get_adapter(0))) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ);
- }
-
- while (1) {
- list_for_each_entry(client, &adap->clients, list)
- if (client->addr == 0x4a)
- goto found_it;
+ np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
+ if (np == NULL)
+ return -ENOENT;
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ);
+ client = of_find_i2c_device_by_node(np);
+ if (client == NULL) {
+ of_node_put(np);
+ return -ENOENT;
}
-found_it:
- pika_setup_critical_temp(client);
+ pika_setup_critical_temp(np, client);
- i2c_put_adapter(adap);
+ of_node_put(np);
- printk(KERN_INFO "PIKA DTM thread running.\n");
+ printk(KERN_INFO "Warp DTM thread running.\n");
while (!kthread_should_stop()) {
int val;
@@ -291,7 +271,6 @@ found_it:
return 0;
}
-
static int __init pika_dtm_start(void)
{
struct task_struct *dtm_thread;
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index ddf0bdc0fc8b..7ee979f323d1 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -147,7 +147,7 @@ int __init pq2ads_pci_init_irq(void)
goto out;
}
- priv = alloc_bootmem(sizeof(struct pq2ads_pci_pic));
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
of_node_put(np);
ret = -ENOMEM;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 77f90b356356..60ed9c067b1d 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -285,6 +285,7 @@ static struct of_device_id mpc85xx_ids[] = {
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{ .compatible = "gianfar", },
+ { .compatible = "fsl,rapidio-delta", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index cc0b0db8a6f3..62c592ede641 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -52,20 +52,19 @@ smp_85xx_kick_cpu(int nr)
pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
- local_irq_save(flags);
-
np = of_get_cpu_node(nr, NULL);
cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL);
if (cpu_rel_addr == NULL) {
printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
- local_irq_restore(flags);
return;
}
/* Map the spin table */
bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+ local_irq_save(flags);
+
out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
@@ -73,10 +72,10 @@ smp_85xx_kick_cpu(int nr)
while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
mdelay(1);
- iounmap(bptr_vaddr);
-
local_irq_restore(flags);
+ iounmap(bptr_vaddr);
+
pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
}
diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
index d0e8443b12c6..747d8fb3ab82 100644
--- a/arch/powerpc/platforms/85xx/socrates.c
+++ b/arch/powerpc/platforms/85xx/socrates.c
@@ -102,10 +102,11 @@ static struct of_device_id __initdata socrates_of_bus_ids[] = {
{},
};
-static void __init socrates_init(void)
+static int __init socrates_publish_devices(void)
{
- of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
+ return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
}
+machine_device_initcall(socrates, socrates_publish_devices);
/*
* Called very early, device-tree isn't unflattened
@@ -124,7 +125,6 @@ define_machine(socrates) {
.name = "Socrates",
.probe = socrates_probe,
.setup_arch = socrates_setup_arch,
- .init = socrates_init,
.init_IRQ = socrates_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index ee01532786e4..1b426050a2f9 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -32,7 +32,6 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
-#include <linux/of_platform.h>
/* A few bit definitions needed for fixups on some boards */
#define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index c71498dbf211..aca5741ddc67 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -85,7 +85,7 @@ static inline void axon_msi_debug_setup(struct device_node *dn,
static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val)
{
- pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
+ pr_devel("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
dcr_write(msic->dcr_host, dcr_n, val);
}
@@ -98,7 +98,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
int retry = 0;
write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG);
- pr_debug("axon_msi: original write_offset 0x%x\n", write_offset);
+ pr_devel("axon_msi: original write_offset 0x%x\n", write_offset);
/* write_offset doesn't wrap properly, so we have to mask it */
write_offset &= MSIC_FIFO_SIZE_MASK;
@@ -108,7 +108,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
msi = le32_to_cpu(msic->fifo_virt[idx]);
msi &= 0xFFFF;
- pr_debug("axon_msi: woff %x roff %x msi %x\n",
+ pr_devel("axon_msi: woff %x roff %x msi %x\n",
write_offset, msic->read_offset, msi);
if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) {
@@ -123,12 +123,12 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
*/
udelay(1);
retry++;
- pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+ pr_devel("axon_msi: invalid irq 0x%x!\n", msi);
continue;
}
if (retry) {
- pr_debug("axon_msi: late irq 0x%x, retry %d\n",
+ pr_devel("axon_msi: late irq 0x%x, retry %d\n",
msi, retry);
retry = 0;
}
@@ -332,7 +332,7 @@ static int axon_msi_shutdown(struct of_device *device)
struct axon_msic *msic = dev_get_drvdata(&device->dev);
u32 tmp;
- pr_debug("axon_msi: disabling %s\n",
+ pr_devel("axon_msi: disabling %s\n",
msic->irq_host->of_node->full_name);
tmp = dcr_read(msic->dcr_host, MSIC_CTRL_REG);
tmp &= ~MSIC_CTRL_ENABLE & ~MSIC_CTRL_IRQ_ENABLE;
@@ -349,7 +349,7 @@ static int axon_msi_probe(struct of_device *device,
unsigned int virq;
int dcr_base, dcr_len;
- pr_debug("axon_msi: setting up dn %s\n", dn->full_name);
+ pr_devel("axon_msi: setting up dn %s\n", dn->full_name);
msic = kzalloc(sizeof(struct axon_msic), GFP_KERNEL);
if (!msic) {
@@ -403,7 +403,7 @@ static int axon_msi_probe(struct of_device *device,
set_irq_data(virq, msic);
set_irq_chained_handler(virq, axon_msi_cascade);
- pr_debug("axon_msi: irq 0x%x setup for axon_msi\n", virq);
+ pr_devel("axon_msi: irq 0x%x setup for axon_msi\n", virq);
/* Enable the MSIC hardware */
msic_dcr_write(msic, MSIC_BASE_ADDR_HI_REG, msic->fifo_phys >> 32);
@@ -484,13 +484,13 @@ void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic)
addr = of_translate_address(dn, of_get_property(dn, "reg", NULL));
if (addr == OF_BAD_ADDR) {
- pr_debug("axon_msi: couldn't translate reg property\n");
+ pr_devel("axon_msi: couldn't translate reg property\n");
return;
}
msic->trigger = ioremap(addr, 0x4);
if (!msic->trigger) {
- pr_debug("axon_msi: ioremap failed\n");
+ pr_devel("axon_msi: ioremap failed\n");
return;
}
@@ -498,7 +498,7 @@ void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic)
if (!debugfs_create_file(name, 0600, powerpc_debugfs_root,
msic, &fops_msic)) {
- pr_debug("axon_msi: debugfs_create_file failed!\n");
+ pr_devel("axon_msi: debugfs_create_file failed!\n");
return;
}
}
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index 9046803c8276..bc97fada48c6 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -36,7 +36,6 @@
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/paca.h>
-#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
@@ -140,31 +139,6 @@ static void __devinit smp_cell_setup_cpu(int cpu)
mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
}
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit cell_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
- timebase = get_tb();
- spin_unlock(&timebase_lock);
-
- while (timebase)
- barrier();
- rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit cell_take_timebase(void)
-{
- while (!timebase)
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase >> 32, timebase & 0xffffffff);
- timebase = 0;
- spin_unlock(&timebase_lock);
-}
-
static void __devinit smp_cell_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -224,8 +198,8 @@ void __init smp_init_cell(void)
/* Non-lpar has additional take/give timebase */
if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
- smp_ops->give_timebase = cell_give_timebase;
- smp_ops->take_timebase = cell_take_timebase;
+ smp_ops->give_timebase = rtas_give_timebase;
+ smp_ops->take_timebase = rtas_take_timebase;
}
DBG(" <- smp_init_cell()\n");
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index 10a4a4d063b6..02cafecc90e3 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -26,7 +26,6 @@
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/smp.h>
-#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/mpic.h>
#include <asm/rtas.h>
@@ -42,40 +41,12 @@ static void __devinit smp_chrp_setup_cpu(int cpu_nr)
mpic_setup_this_cpu();
}
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned int timebase_upper = 0, timebase_lower = 0;
-
-void __devinit smp_chrp_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
- timebase_upper = get_tbu();
- timebase_lower = get_tbl();
- spin_unlock(&timebase_lock);
-
- while (timebase_upper || timebase_lower)
- barrier();
- rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-void __devinit smp_chrp_take_timebase(void)
-{
- while (!(timebase_upper || timebase_lower))
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase_upper, timebase_lower);
- timebase_upper = 0;
- timebase_lower = 0;
- spin_unlock(&timebase_lock);
- printk("CPU %i taken timebase\n", smp_processor_id());
-}
-
/* CHRP with openpic */
struct smp_ops_t chrp_smp_ops = {
.message_pass = smp_mpic_message_pass,
.probe = smp_mpic_probe,
.kick_cpu = smp_chrp_kick_cpu,
.setup_cpu = smp_chrp_setup_cpu,
- .give_timebase = smp_chrp_give_timebase,
- .take_timebase = smp_chrp_take_timebase,
+ .give_timebase = rtas_give_timebase,
+ .take_timebase = rtas_take_timebase,
};
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 153051eb6d93..a4619347aa7e 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -71,20 +71,25 @@ static void pas_restart(char *cmd)
}
#ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(timebase_lock);
+static raw_spinlock_t timebase_lock;
static unsigned long timebase;
static void __devinit pas_give_timebase(void)
{
- spin_lock(&timebase_lock);
+ unsigned long flags;
+
+ local_irq_save(flags);
+ hard_irq_disable();
+ __raw_spin_lock(&timebase_lock);
mtspr(SPRN_TBCTL, TBCTL_FREEZE);
isync();
timebase = get_tb();
- spin_unlock(&timebase_lock);
+ __raw_spin_unlock(&timebase_lock);
while (timebase)
barrier();
mtspr(SPRN_TBCTL, TBCTL_RESTART);
+ local_irq_restore(flags);
}
static void __devinit pas_take_timebase(void)
@@ -92,10 +97,10 @@ static void __devinit pas_take_timebase(void)
while (!timebase)
smp_rmb();
- spin_lock(&timebase_lock);
+ __raw_spin_lock(&timebase_lock);
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
- spin_unlock(&timebase_lock);
+ __raw_spin_unlock(&timebase_lock);
}
struct smp_ops_t pas_smp_ops = {
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 22ecfbe7183d..708c75133377 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -251,7 +251,7 @@ static void g5_pfunc_switch_volt(int speed_mode)
static struct pmf_function *pfunc_cpu_setfreq_high;
static struct pmf_function *pfunc_cpu_setfreq_low;
static struct pmf_function *pfunc_cpu_getfreq;
-static struct pmf_function *pfunc_slewing_done;;
+static struct pmf_function *pfunc_slewing_done;
static int g5_pfunc_switch_freq(int speed_mode)
{
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index dce736349107..d212006a5b3c 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -609,7 +609,7 @@ static int pmacpic_find_viaint(void)
np = of_find_node_by_name(NULL, "via-pmu");
if (np == NULL)
goto not_found;
- viaint = irq_of_parse_and_map(np, 0);;
+ viaint = irq_of_parse_and_map(np, 0);
not_found:
#endif /* CONFIG_ADB_PMU */
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 86f69a4eb49b..c20522656367 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -103,11 +103,6 @@ unsigned long smu_cmdbuf_abs;
EXPORT_SYMBOL(smu_cmdbuf_abs);
#endif
-#ifdef CONFIG_SMP
-extern struct smp_ops_t psurge_smp_ops;
-extern struct smp_ops_t core99_smp_ops;
-#endif /* CONFIG_SMP */
-
static void pmac_show_cpuinfo(struct seq_file *m)
{
struct device_node *np;
@@ -341,34 +336,6 @@ static void __init pmac_setup_arch(void)
ROOT_DEV = DEFAULT_ROOT_DEVICE;
#endif
-#ifdef CONFIG_SMP
- /* Check for Core99 */
- ic = of_find_node_by_name(NULL, "uni-n");
- if (!ic)
- ic = of_find_node_by_name(NULL, "u3");
- if (!ic)
- ic = of_find_node_by_name(NULL, "u4");
- if (ic) {
- of_node_put(ic);
- smp_ops = &core99_smp_ops;
- }
-#ifdef CONFIG_PPC32
- else {
- /*
- * We have to set bits in cpu_possible_map here since the
- * secondary CPU(s) aren't in the device tree, and
- * setup_per_cpu_areas only allocates per-cpu data for
- * CPUs in the cpu_possible_map.
- */
- int cpu;
-
- for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
- cpu_set(cpu, cpu_possible_map);
- smp_ops = &psurge_smp_ops;
- }
-#endif
-#endif /* CONFIG_SMP */
-
#ifdef CONFIG_ADB
if (strstr(cmd_line, "adb_sync")) {
extern int __adb_probe_sync;
@@ -512,6 +479,14 @@ static void __init pmac_init_early(void)
#ifdef CONFIG_PPC64
iommu_init_early_dart();
#endif
+
+ /* SMP Init has to be done early as we need to patch up
+ * cpu_possible_map before interrupt stacks are allocated
+ * or kaboom...
+ */
+#ifdef CONFIG_SMP
+ pmac_setup_smp();
+#endif
}
static int __init pmac_declare_of_platform_devices(void)
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index cf1dbe758890..6d4da7b46b41 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -64,10 +64,11 @@
extern void __secondary_start_pmac_0(void);
extern int pmac_pfunc_base_install(void);
-#ifdef CONFIG_PPC32
+static void (*pmac_tb_freeze)(int freeze);
+static u64 timebase;
+static int tb_req;
-/* Sync flag for HW tb sync */
-static volatile int sec_tb_reset = 0;
+#ifdef CONFIG_PPC32
/*
* Powersurge (old powermac SMP) support.
@@ -294,6 +295,9 @@ static int __init smp_psurge_probe(void)
psurge_quad_init();
/* All released cards using this HW design have 4 CPUs */
ncpus = 4;
+ /* No sure how timebase sync works on those, let's use SW */
+ smp_ops->give_timebase = smp_generic_give_timebase;
+ smp_ops->take_timebase = smp_generic_take_timebase;
} else {
iounmap(quad_base);
if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
@@ -308,18 +312,15 @@ static int __init smp_psurge_probe(void)
psurge_start = ioremap(PSURGE_START, 4);
psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
- /*
- * This is necessary because OF doesn't know about the
+ /* This is necessary because OF doesn't know about the
* secondary cpu(s), and thus there aren't nodes in the
* device tree for them, and smp_setup_cpu_maps hasn't
- * set their bits in cpu_possible_map and cpu_present_map.
+ * set their bits in cpu_present_map.
*/
if (ncpus > NR_CPUS)
ncpus = NR_CPUS;
- for (i = 1; i < ncpus ; ++i) {
+ for (i = 1; i < ncpus ; ++i)
cpu_set(i, cpu_present_map);
- set_hard_smp_processor_id(i, i);
- }
if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
@@ -329,8 +330,14 @@ static int __init smp_psurge_probe(void)
static void __init smp_psurge_kick_cpu(int nr)
{
unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
- unsigned long a;
- int i;
+ unsigned long a, flags;
+ int i, j;
+
+ /* Defining this here is evil ... but I prefer hiding that
+ * crap to avoid giving people ideas that they can do the
+ * same.
+ */
+ extern volatile unsigned int cpu_callin_map[NR_CPUS];
/* may need to flush here if secondary bats aren't setup */
for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
@@ -339,47 +346,52 @@ static void __init smp_psurge_kick_cpu(int nr)
if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
+ /* This is going to freeze the timeebase, we disable interrupts */
+ local_irq_save(flags);
+
out_be32(psurge_start, start);
mb();
psurge_set_ipi(nr);
+
/*
* We can't use udelay here because the timebase is now frozen.
*/
for (i = 0; i < 2000; ++i)
- barrier();
+ asm volatile("nop" : : : "memory");
psurge_clr_ipi(nr);
- if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
-}
-
-/*
- * With the dual-cpu powersurge board, the decrementers and timebases
- * of both cpus are frozen after the secondary cpu is started up,
- * until we give the secondary cpu another interrupt. This routine
- * uses this to get the timebases synchronized.
- * -- paulus.
- */
-static void __init psurge_dual_sync_tb(int cpu_nr)
-{
- int t;
-
- set_dec(tb_ticks_per_jiffy);
- /* XXX fixme */
- set_tb(0, 0);
-
- if (cpu_nr > 0) {
+ /*
+ * Also, because the timebase is frozen, we must not return to the
+ * caller which will try to do udelay's etc... Instead, we wait -here-
+ * for the CPU to callin.
+ */
+ for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) {
+ for (j = 1; j < 10000; j++)
+ asm volatile("nop" : : : "memory");
+ asm volatile("sync" : : : "memory");
+ }
+ if (!cpu_callin_map[nr])
+ goto stuck;
+
+ /* And we do the TB sync here too for standard dual CPU cards */
+ if (psurge_type == PSURGE_DUAL) {
+ while(!tb_req)
+ barrier();
+ tb_req = 0;
+ mb();
+ timebase = get_tb();
+ mb();
+ while (timebase)
+ barrier();
mb();
- sec_tb_reset = 1;
- return;
}
+ stuck:
+ /* now interrupt the secondary, restarting both TBs */
+ if (psurge_type == PSURGE_DUAL)
+ psurge_set_ipi(1);
- /* wait for the secondary to have reset its TB before proceeding */
- for (t = 10000000; t > 0 && !sec_tb_reset; --t)
- ;
-
- /* now interrupt the secondary, starting both TBs */
- psurge_set_ipi(1);
+ if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
}
static struct irqaction psurge_irqaction = {
@@ -390,36 +402,35 @@ static struct irqaction psurge_irqaction = {
static void __init smp_psurge_setup_cpu(int cpu_nr)
{
+ if (cpu_nr != 0)
+ return;
- if (cpu_nr == 0) {
- /* If we failed to start the second CPU, we should still
- * send it an IPI to start the timebase & DEC or we might
- * have them stuck.
- */
- if (num_online_cpus() < 2) {
- if (psurge_type == PSURGE_DUAL)
- psurge_set_ipi(1);
- return;
- }
- /* reset the entry point so if we get another intr we won't
- * try to startup again */
- out_be32(psurge_start, 0x100);
- if (setup_irq(30, &psurge_irqaction))
- printk(KERN_ERR "Couldn't get primary IPI interrupt");
- }
-
- if (psurge_type == PSURGE_DUAL)
- psurge_dual_sync_tb(cpu_nr);
+ /* reset the entry point so if we get another intr we won't
+ * try to startup again */
+ out_be32(psurge_start, 0x100);
+ if (setup_irq(30, &psurge_irqaction))
+ printk(KERN_ERR "Couldn't get primary IPI interrupt");
}
void __init smp_psurge_take_timebase(void)
{
- /* Dummy implementation */
+ if (psurge_type != PSURGE_DUAL)
+ return;
+
+ tb_req = 1;
+ mb();
+ while (!timebase)
+ barrier();
+ mb();
+ set_tb(timebase >> 32, timebase & 0xffffffff);
+ timebase = 0;
+ mb();
+ set_dec(tb_ticks_per_jiffy/2);
}
void __init smp_psurge_give_timebase(void)
{
- /* Dummy implementation */
+ /* Nothing to do here */
}
/* PowerSurge-style Macs */
@@ -437,9 +448,6 @@ struct smp_ops_t psurge_smp_ops = {
* Core 99 and later support
*/
-static void (*pmac_tb_freeze)(int freeze);
-static u64 timebase;
-static int tb_req;
static void smp_core99_give_timebase(void)
{
@@ -478,7 +486,6 @@ static void __devinit smp_core99_take_timebase(void)
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
mb();
- set_dec(tb_ticks_per_jiffy/2);
local_irq_restore(flags);
}
@@ -920,3 +927,34 @@ struct smp_ops_t core99_smp_ops = {
# endif
#endif
};
+
+void __init pmac_setup_smp(void)
+{
+ struct device_node *np;
+
+ /* Check for Core99 */
+ np = of_find_node_by_name(NULL, "uni-n");
+ if (!np)
+ np = of_find_node_by_name(NULL, "u3");
+ if (!np)
+ np = of_find_node_by_name(NULL, "u4");
+ if (np) {
+ of_node_put(np);
+ smp_ops = &core99_smp_ops;
+ }
+#ifdef CONFIG_PPC32
+ else {
+ /* We have to set bits in cpu_possible_map here since the
+ * secondary CPU(s) aren't in the device tree. Various
+ * things won't be initialized for CPUs not in the possible
+ * map, so we really need to fix it up here.
+ */
+ int cpu;
+
+ for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
+ cpu_set(cpu, cpu_possible_map);
+ smp_ops = &psurge_smp_ops;
+ }
+#endif /* CONFIG_PPC32 */
+}
+
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 9fead0faf38b..3f763c5284ac 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -284,7 +284,6 @@ static int ps3_sb_free_mmio_region(struct ps3_mmio_region *r)
int result;
dump_mmio_region(r);
-;
result = lv1_unmap_device_mmio_region(r->dev->bus_id, r->dev->dev_id,
r->lpar_addr);
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index e3139fa5e556..903eb9eec687 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -286,7 +286,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
unsigned long hpte_v, hpte_r;
if (!(vflags & HPTE_V_BOLTED))
- pr_debug("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
+ pr_devel("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
"rflags=%lx, vflags=%lx, psize=%d)\n",
hpte_group, va, pa, rflags, vflags, psize);
@@ -294,7 +294,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
hpte_r = hpte_encode_r(pa, psize) | rflags;
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
+ pr_devel(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
/* Now fill in the actual HPTE */
/* Set CEC cookie to 0 */
@@ -311,7 +311,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot);
if (unlikely(lpar_rc == H_PTEG_FULL)) {
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" full\n");
+ pr_devel(" full\n");
return -1;
}
@@ -322,11 +322,11 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
*/
if (unlikely(lpar_rc != H_SUCCESS)) {
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" lpar err %lu\n", lpar_rc);
+ pr_devel(" lpar err %lu\n", lpar_rc);
return -2;
}
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" -> slot: %lu\n", slot & 7);
+ pr_devel(" -> slot: %lu\n", slot & 7);
/* Because of iSeries, we have to pass down the secondary
* bucket bit here as well
@@ -418,17 +418,17 @@ static long pSeries_lpar_hpte_updatepp(unsigned long slot,
want_v = hpte_encode_avpn(va, psize, ssize);
- pr_debug(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
+ pr_devel(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
want_v, slot, flags, psize);
lpar_rc = plpar_pte_protect(flags, slot, want_v);
if (lpar_rc == H_NOT_FOUND) {
- pr_debug("not found !\n");
+ pr_devel("not found !\n");
return -1;
}
- pr_debug("ok\n");
+ pr_devel("ok\n");
BUG_ON(lpar_rc != H_SUCCESS);
@@ -503,7 +503,7 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
unsigned long lpar_rc;
unsigned long dummy1, dummy2;
- pr_debug(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
+ pr_devel(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
slot, va, psize, local);
want_v = hpte_encode_avpn(va, psize, ssize);
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 1a231c389ba0..1f8f6cfb94f7 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -35,7 +35,6 @@
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/paca.h>
-#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
@@ -118,31 +117,6 @@ static void __devinit smp_xics_setup_cpu(int cpu)
}
#endif /* CONFIG_XICS */
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit pSeries_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
- timebase = get_tb();
- spin_unlock(&timebase_lock);
-
- while (timebase)
- barrier();
- rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit pSeries_take_timebase(void)
-{
- while (!timebase)
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase >> 32, timebase & 0xffffffff);
- timebase = 0;
- spin_unlock(&timebase_lock);
-}
-
static void __devinit smp_pSeries_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -209,8 +183,8 @@ static void __init smp_init_pseries(void)
/* Non-lpar has additional take/give timebase */
if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
- smp_ops->give_timebase = pSeries_give_timebase;
- smp_ops->take_timebase = pSeries_take_timebase;
+ smp_ops->give_timebase = rtas_give_timebase;
+ smp_ops->take_timebase = rtas_take_timebase;
}
pr_debug(" <- smp_init_pSeries()\n");
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index be3581a8c294..419f8a637ffe 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -190,10 +190,10 @@ static void xics_unmask_irq(unsigned int virq)
int call_status;
int server;
- pr_debug("xics: unmask virq %d\n", virq);
+ pr_devel("xics: unmask virq %d\n", virq);
irq = (unsigned int)irq_map[virq].hwirq;
- pr_debug(" -> map to hwirq 0x%x\n", irq);
+ pr_devel(" -> map to hwirq 0x%x\n", irq);
if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
return;
@@ -252,7 +252,7 @@ static void xics_mask_irq(unsigned int virq)
{
unsigned int irq;
- pr_debug("xics: mask virq %d\n", virq);
+ pr_devel("xics: mask virq %d\n", virq);
irq = (unsigned int)irq_map[virq].hwirq;
if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
@@ -414,7 +414,7 @@ static int xics_host_match(struct irq_host *h, struct device_node *node)
static int xics_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
+ pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
/* Insert the interrupt mapping into the radix tree for fast lookup */
irq_radix_revmap_insert(xics_host, virq, hw);
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 39db9d1155d2..cbb3bed75d3c 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -965,7 +965,7 @@ static inline void fsl_rio_info(struct device *dev, u32 ccsr)
break;
default:
str = "Unknown";
- break;;
+ break;
}
dev_info(dev, "Hardware port width: %s\n", str);
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index a86d3ce01ead..69e2630c9062 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -728,12 +728,10 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
if (ret)
return NULL;
- ipic = alloc_bootmem(sizeof(struct ipic));
+ ipic = kzalloc(sizeof(*ipic), GFP_KERNEL);
if (ipic == NULL)
return NULL;
- memset(ipic, 0, sizeof(struct ipic));
-
ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
NR_IPIC_INTS,
&ipic_host_ops, 0);
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 9c3af5045495..3981ae4cb58e 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -279,28 +279,29 @@ static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr,
}
#ifdef CONFIG_PPC_DCR
-static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb,
+static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node,
+ struct mpic_reg_bank *rb,
unsigned int offset, unsigned int size)
{
const u32 *dbasep;
- dbasep = of_get_property(mpic->irqhost->of_node, "dcr-reg", NULL);
+ dbasep = of_get_property(node, "dcr-reg", NULL);
- rb->dhost = dcr_map(mpic->irqhost->of_node, *dbasep + offset, size);
+ rb->dhost = dcr_map(node, *dbasep + offset, size);
BUG_ON(!DCR_MAP_OK(rb->dhost));
}
-static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr,
- struct mpic_reg_bank *rb, unsigned int offset,
- unsigned int size)
+static inline void mpic_map(struct mpic *mpic, struct device_node *node,
+ phys_addr_t phys_addr, struct mpic_reg_bank *rb,
+ unsigned int offset, unsigned int size)
{
if (mpic->flags & MPIC_USES_DCR)
- _mpic_map_dcr(mpic, rb, offset, size);
+ _mpic_map_dcr(mpic, node, rb, offset, size);
else
_mpic_map_mmio(mpic, phys_addr, rb, offset, size);
}
#else /* CONFIG_PPC_DCR */
-#define mpic_map(m,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
+#define mpic_map(m,n,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
#endif /* !CONFIG_PPC_DCR */
@@ -507,9 +508,8 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n");
/* Allocate fixups array */
- mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup));
+ mpic->fixups = kzalloc(128 * sizeof(*mpic->fixups), GFP_KERNEL);
BUG_ON(mpic->fixups == NULL);
- memset(mpic->fixups, 0, 128 * sizeof(struct mpic_irq_fixup));
/* Init spinlock */
spin_lock_init(&mpic->fixup_lock);
@@ -1052,11 +1052,10 @@ struct mpic * __init mpic_alloc(struct device_node *node,
int intvec_top;
u64 paddr = phys_addr;
- mpic = alloc_bootmem(sizeof(struct mpic));
+ mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
if (mpic == NULL)
return NULL;
-
- memset(mpic, 0, sizeof(struct mpic));
+
mpic->name = name;
mpic->hc_irq = mpic_irq_chip;
@@ -1109,9 +1108,8 @@ struct mpic * __init mpic_alloc(struct device_node *node,
psize /= 4;
bits = intvec_top + 1;
mapsize = BITS_TO_LONGS(bits) * sizeof(unsigned long);
- mpic->protected = alloc_bootmem(mapsize);
+ mpic->protected = kzalloc(mapsize, GFP_KERNEL);
BUG_ON(mpic->protected == NULL);
- memset(mpic->protected, 0, mapsize);
for (i = 0; i < psize; i++) {
if (psrc[i] > intvec_top)
continue;
@@ -1152,8 +1150,8 @@ struct mpic * __init mpic_alloc(struct device_node *node,
}
/* Map the global registers */
- mpic_map(mpic, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
- mpic_map(mpic, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
+ mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
+ mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
/* Reset */
if (flags & MPIC_WANTS_RESET) {
@@ -1194,7 +1192,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
/* Map the per-CPU registers */
for (i = 0; i < mpic->num_cpus; i++) {
- mpic_map(mpic, paddr, &mpic->cpuregs[i],
+ mpic_map(mpic, node, paddr, &mpic->cpuregs[i],
MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE),
0x1000);
}
@@ -1202,7 +1200,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
/* Initialize main ISU if none provided */
if (mpic->isu_size == 0) {
mpic->isu_size = mpic->num_sources;
- mpic_map(mpic, paddr, &mpic->isus[0],
+ mpic_map(mpic, node, paddr, &mpic->isus[0],
MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
}
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
@@ -1256,8 +1254,10 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
BUG_ON(isu_num >= MPIC_MAX_ISU);
- mpic_map(mpic, paddr, &mpic->isus[isu_num], 0,
+ mpic_map(mpic, mpic->irqhost->of_node,
+ paddr, &mpic->isus[isu_num], 0,
MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
+
if ((isu_first + mpic->isu_size) > mpic->num_sources)
mpic->num_sources = isu_first + mpic->isu_size;
}
@@ -1351,7 +1351,8 @@ void __init mpic_init(struct mpic *mpic)
#ifdef CONFIG_PM
/* allocate memory to save mpic state */
- mpic->save_data = alloc_bootmem(mpic->num_sources * sizeof(struct mpic_irq_save));
+ mpic->save_data = kmalloc(mpic->num_sources * sizeof(*mpic->save_data),
+ GFP_KERNEL);
BUG_ON(mpic->save_data == NULL);
#endif
}
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index daefc93ddffe..6ff9d71b4c0d 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1531,7 +1531,7 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
*/
/* Calculate window size */
- sa = (0xffffffffffffffffull << ilog2(ep_size));;
+ sa = (0xffffffffffffffffull << ilog2(ep_size));
/* Setup BAR0 */
out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
@@ -1550,7 +1550,7 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(ep_addr));
} else {
/* Calculate window size */
- sa = (0xffffffffffffffffull << ilog2(size));;
+ sa = (0xffffffffffffffffull << ilog2(size));
if (res->flags & IORESOURCE_PREFETCH)
sa |= 0x8;
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index b28b0e512d67..237e3654f48c 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -112,6 +112,7 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
{
unsigned long flags;
u8 mcn_shift = 0, dev_shift = 0;
+ u32 ret;
spin_lock_irqsave(&qe_lock, flags);
if (cmd == QE_RESET) {
@@ -139,11 +140,13 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
}
/* wait for the QE_CR_FLG to clear */
- while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
- cpu_relax();
+ ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
+ 100, 0);
+ /* On timeout (e.g. failure), the expression will be false (ret == 0),
+ otherwise it will be true (ret == 1). */
spin_unlock_irqrestore(&qe_lock, flags);
- return 0;
+ return ret == 1;
}
EXPORT_SYMBOL(qe_issue_cmd);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 63cdf9887f36..074905c3ee5a 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -333,12 +333,10 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
if (ret)
return;
- qe_ic = alloc_bootmem(sizeof(struct qe_ic));
+ qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
if (qe_ic == NULL)
return;
- memset(qe_ic, 0, sizeof(struct qe_ic));
-
qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
NR_QE_IC_INTS, &qe_ic_host_ops, 0);
if (qe_ic->irqhost == NULL)
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index d35405c59434..466ce9ace127 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -258,11 +258,10 @@ static struct uic * __init uic_init_one(struct device_node *node)
BUG_ON(! of_device_is_compatible(node, "ibm,uic"));
- uic = alloc_bootmem(sizeof(*uic));
+ uic = kzalloc(sizeof(*uic), GFP_KERNEL);
if (! uic)
return NULL; /* FIXME: panic? */
- memset(uic, 0, sizeof(*uic));
spin_lock_init(&uic->lock);
indexp = of_get_property(node, "cell-index", &len);
if (!indexp || (len != sizeof(u32))) {
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index e577839f3073..2ae5d72f47ed 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -95,6 +95,11 @@ config S390
select HAVE_ARCH_TRACEHOOK
select INIT_ALL_POSSIBLE
select HAVE_PERF_COUNTERS
+ select GENERIC_ATOMIC64 if !64BIT
+
+config SCHED_OMIT_FRAME_POINTER
+ bool
+ default y
source "init/Kconfig"
@@ -116,6 +121,9 @@ config 32BIT
bool
default y if !64BIT
+config KTIME_SCALAR
+ def_bool 32BIT
+
config SMP
bool "Symmetric multi-processing support"
---help---
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index fca9dffcc669..c7d0abfb0f00 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -268,7 +268,12 @@ static __inline__ int atomic64_add_unless(atomic64_t *v,
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
#undef __CSG_LOOP
-#endif
+
+#else /* __s390x__ */
+
+#include <asm-generic/atomic64.h>
+
+#endif /* __s390x__ */
#define smp_mb__before_atomic_dec() smp_mb()
#define smp_mb__after_atomic_dec() smp_mb()
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index a27d0d5a6f86..1cd02f6073a0 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -99,7 +99,9 @@ struct kvm_s390_sie_block {
__u8 reservedd0[48]; /* 0x00d0 */
__u64 gcr[16]; /* 0x0100 */
__u64 gbea; /* 0x0180 */
- __u8 reserved188[120]; /* 0x0188 */
+ __u8 reserved188[24]; /* 0x0188 */
+ __u32 fac; /* 0x01a0 */
+ __u8 reserved1a4[92]; /* 0x01a4 */
} __attribute__((packed));
struct kvm_vcpu_stat {
diff --git a/arch/s390/include/asm/perf_counter.h b/arch/s390/include/asm/perf_counter.h
index a7205a3828cb..7015188c2cc2 100644
--- a/arch/s390/include/asm/perf_counter.h
+++ b/arch/s390/include/asm/perf_counter.h
@@ -6,3 +6,5 @@
static inline void set_perf_counter_pending(void) {}
static inline void clear_perf_counter_pending(void) {}
+
+#define PERF_COUNTER_INDEX_OFFSET 0
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 925bcc649035..ba1cab9fc1f9 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -61,7 +61,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index b8bf4b140065..371a2d88f4ac 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -70,6 +70,7 @@ struct shutdown_action {
char *name;
void (*fn) (struct shutdown_trigger *trigger);
int (*init) (void);
+ int init_rc;
};
static char *ipl_type_str(enum ipl_type type)
@@ -1486,11 +1487,13 @@ static int set_trigger(const char *buf, struct shutdown_trigger *trigger,
int i;
for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) {
- if (!shutdown_actions_list[i])
- continue;
if (sysfs_streq(buf, shutdown_actions_list[i]->name)) {
- trigger->action = shutdown_actions_list[i];
- return len;
+ if (shutdown_actions_list[i]->init_rc) {
+ return shutdown_actions_list[i]->init_rc;
+ } else {
+ trigger->action = shutdown_actions_list[i];
+ return len;
+ }
}
}
return -EINVAL;
@@ -1640,8 +1643,8 @@ static void __init shutdown_actions_init(void)
for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) {
if (!shutdown_actions_list[i]->init)
continue;
- if (shutdown_actions_list[i]->init())
- shutdown_actions_list[i] = NULL;
+ shutdown_actions_list[i]->init_rc =
+ shutdown_actions_list[i]->init();
}
}
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index c18b21d6991c..90d9d1ba258b 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -25,6 +25,7 @@
#include <asm/lowcore.h>
#include <asm/pgtable.h>
#include <asm/nmi.h>
+#include <asm/system.h>
#include "kvm-s390.h"
#include "gaccess.h"
@@ -69,6 +70,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
{ NULL }
};
+static unsigned long long *facilities;
/* Section: not file related */
void kvm_arch_hardware_enable(void *garbage)
@@ -288,6 +290,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
vcpu->arch.sie_block->ecb = 2;
vcpu->arch.sie_block->eca = 0xC1002001U;
+ vcpu->arch.sie_block->fac = (int) (long) facilities;
hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet,
(unsigned long) vcpu);
@@ -739,11 +742,29 @@ gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
static int __init kvm_s390_init(void)
{
- return kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+ int ret;
+ ret = kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+ if (ret)
+ return ret;
+
+ /*
+ * guests can ask for up to 255+1 double words, we need a full page
+ * to hold the maximum amount of facilites. On the other hand, we
+ * only set facilities that are known to work in KVM.
+ */
+ facilities = (unsigned long long *) get_zeroed_page(GFP_DMA);
+ if (!facilities) {
+ kvm_exit();
+ return -ENOMEM;
+ }
+ stfle(facilities, 1);
+ facilities[0] &= 0xff00fff3f0700000ULL;
+ return 0;
}
static void __exit kvm_s390_exit(void)
{
+ free_page((unsigned long) facilities);
kvm_exit();
}
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 93ecd06e1a74..d426aac8095d 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -158,7 +158,7 @@ static int handle_stfl(struct kvm_vcpu *vcpu)
vcpu->stat.instruction_stfl++;
/* only pass the facility bits, which we can handle */
- facility_list &= 0xfe00fff3;
+ facility_list &= 0xff00fff3;
rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list),
&facility_list, sizeof(facility_list));
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index ab6735df2d21..97975ec7a274 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -3,6 +3,6 @@
#
lib-y += delay.o string.o uaccess_std.o uaccess_pt.o
-obj-$(CONFIG_32BIT) += div64.o qrnnd.o
+obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o
lib-$(CONFIG_64BIT) += uaccess_mvcos.o
lib-$(CONFIG_SMP) += spinlock.o
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index 3f5f680726ed..97c1eca83cc2 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -36,9 +36,11 @@ static void __udelay_disabled(unsigned long usecs)
cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
__ctl_load(cr0 , 0, 0);
mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+ lockdep_off();
trace_hardirqs_on();
__load_psw_mask(mask);
local_irq_disable();
+ lockdep_on();
__ctl_load(cr0_saved, 0, 0);
local_tick_enable(clock_saved);
set_clock_comparator(S390_lowcore.clock_comparator);
diff --git a/arch/s390/lib/ucmpdi2.c b/arch/s390/lib/ucmpdi2.c
new file mode 100644
index 000000000000..3e05ff532582
--- /dev/null
+++ b/arch/s390/lib/ucmpdi2.c
@@ -0,0 +1,26 @@
+#include <linux/module.h>
+
+union ull_union {
+ unsigned long long ull;
+ struct {
+ unsigned int high;
+ unsigned int low;
+ } ui;
+};
+
+int __ucmpdi2(unsigned long long a, unsigned long long b)
+{
+ union ull_union au = {.ull = a};
+ union ull_union bu = {.ull = b};
+
+ if (au.ui.high < bu.ui.high)
+ return 0;
+ else if (au.ui.high > bu.ui.high)
+ return 2;
+ if (au.ui.low < bu.ui.low)
+ return 0;
+ else if (au.ui.low > bu.ui.low)
+ return 2;
+ return 1;
+}
+EXPORT_SYMBOL(__ucmpdi2);
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 8ece0b5bd028..39224b57c6ef 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -61,10 +61,6 @@ config EARLY_PRINTK
select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
the kernel command line option to toggle back and forth.
-config DEBUG_BOOTMEM
- depends on DEBUG_KERNEL
- bool "Debug BOOTMEM initialization"
-
config DEBUG_STACKOVERFLOW
bool "Check for stack overflows"
depends on DEBUG_KERNEL && SUPERH32
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 9c3a33210d61..180455642a43 100644
--- a/arch/sh/boards/mach-se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -50,7 +50,7 @@ unsigned char se7206_inb_p(unsigned long port)
unsigned short se7206_inw(unsigned long port)
{
- return *port2adr(port);;
+ return *port2adr(port);
}
void se7206_outb(unsigned char value, unsigned long port)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 9cd04bd558b8..8fed45a2fb85 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -19,10 +19,13 @@
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <linux/input.h>
+#include <linux/usb/r8a66597.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
+#include <asm/sh_eth.h>
+#include <asm/clock.h>
#include <asm/sh_keysc.h>
#include <cpu/sh7724.h>
#include <mach-se/mach/se7724.h>
@@ -272,6 +275,62 @@ static struct platform_device keysc_device = {
},
};
+/* SH Eth */
+static struct resource sh_eth_resources[] = {
+ [0] = {
+ .start = SH_ETH_ADDR,
+ .end = SH_ETH_ADDR + 0x1FC,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 91,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+struct sh_eth_plat_data sh_eth_plat = {
+ .phy = 0x1f, /* SMSC LAN8187 */
+ .edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh_eth_device = {
+ .name = "sh-eth",
+ .id = 0,
+ .dev = {
+ .platform_data = &sh_eth_plat,
+ },
+ .num_resources = ARRAY_SIZE(sh_eth_resources),
+ .resource = sh_eth_resources,
+};
+
+static struct r8a66597_platdata sh7724_usb0_host_data = {
+};
+
+static struct resource sh7724_usb0_host_resources[] = {
+ [0] = {
+ .start = 0xa4d80000,
+ .end = 0xa4d800ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 65,
+ .end = 65,
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct platform_device sh7724_usb0_host_device = {
+ .name = "r8a66597_hcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &sh7724_usb0_host_data,
+ },
+ .num_resources = ARRAY_SIZE(sh7724_usb0_host_resources),
+ .resource = sh7724_usb0_host_resources,
+};
+
static struct platform_device *ms7724se_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
@@ -280,11 +339,62 @@ static struct platform_device *ms7724se_devices[] __initdata = {
&ceu0_device,
&ceu1_device,
&keysc_device,
+ &sh_eth_device,
+ &sh7724_usb0_host_device,
};
+#define EEPROM_OP 0xBA206000
+#define EEPROM_ADR 0xBA206004
+#define EEPROM_DATA 0xBA20600C
+#define EEPROM_STAT 0xBA206010
+#define EEPROM_STRT 0xBA206014
+static int __init sh_eth_is_eeprom_ready(void)
+{
+ int t = 10000;
+
+ while (t--) {
+ if (!ctrl_inw(EEPROM_STAT))
+ return 1;
+ cpu_relax();
+ }
+
+ printk(KERN_ERR "ms7724se can not access to eeprom\n");
+ return 0;
+}
+
+static void __init sh_eth_init(void)
+{
+ int i;
+ u16 mac[3];
+
+ /* check EEPROM status */
+ if (!sh_eth_is_eeprom_ready())
+ return;
+
+ /* read MAC addr from EEPROM */
+ for (i = 0 ; i < 3 ; i++) {
+ ctrl_outw(0x0, EEPROM_OP); /* read */
+ ctrl_outw(i*2, EEPROM_ADR);
+ ctrl_outw(0x1, EEPROM_STRT);
+ if (!sh_eth_is_eeprom_ready())
+ return;
+
+ mac[i] = ctrl_inw(EEPROM_DATA);
+ mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
+ }
+
+ /* reset sh-eth */
+ ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
+
+ /* set MAC addr */
+ ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
+ ctrl_outl((mac[2]), SH_ETH_MALR);
+}
+
#define SW4140 0xBA201000
#define FPGA_OUT 0xBA200400
#define PORT_HIZA 0xA4050158
+#define PORT_MSELCRB 0xA4050182
#define SW41_A 0x0100
#define SW41_B 0x0200
@@ -294,6 +404,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
#define SW41_F 0x2000
#define SW41_G 0x4000
#define SW41_H 0x8000
+
static int __init devices_setup(void)
{
u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
@@ -302,9 +413,16 @@ static int __init devices_setup(void)
ctrl_outw(ctrl_inw(FPGA_OUT) &
~((1 << 1) | /* LAN */
(1 << 6) | /* VIDEO DAC */
- (1 << 12)), /* USB0 */
+ (1 << 12) | /* USB0 */
+ (1 << 14)), /* RMII */
FPGA_OUT);
+ /* turn on USB clocks, use external clock */
+ ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+
+ /* enable USB0 port */
+ ctrl_outw(0x0600, 0xa40501d4);
+
/* enable IRQ 0,1,2 */
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
gpio_request(GPIO_FN_INTC_IRQ1, NULL);
@@ -374,7 +492,7 @@ static int __init devices_setup(void)
gpio_request(GPIO_FN_VIO0_CLK, NULL);
gpio_request(GPIO_FN_VIO0_FLD, NULL);
gpio_request(GPIO_FN_VIO0_HD, NULL);
- platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20);
+ platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
/* enable CEU1 */
gpio_request(GPIO_FN_VIO1_D7, NULL);
@@ -389,7 +507,7 @@ static int __init devices_setup(void)
gpio_request(GPIO_FN_VIO1_HD, NULL);
gpio_request(GPIO_FN_VIO1_VD, NULL);
gpio_request(GPIO_FN_VIO1_CLK, NULL);
- platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20);
+ platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
/* KEYSC */
gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
@@ -404,6 +522,28 @@ static int __init devices_setup(void)
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT0, NULL);
+ /*
+ * enable SH-Eth
+ *
+ * please remove J33 pin from your board !!
+ *
+ * ms7724 board should not use GPIO_FN_LNKSTA pin
+ * So, This time PTX5 is set to input pin
+ */
+ gpio_request(GPIO_FN_RMII_RXD0, NULL);
+ gpio_request(GPIO_FN_RMII_RXD1, NULL);
+ gpio_request(GPIO_FN_RMII_TXD0, NULL);
+ gpio_request(GPIO_FN_RMII_TXD1, NULL);
+ gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+ gpio_request(GPIO_FN_RMII_TX_EN, NULL);
+ gpio_request(GPIO_FN_RMII_RX_ER, NULL);
+ gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
+ gpio_request(GPIO_FN_MDIO, NULL);
+ gpio_request(GPIO_FN_MDC, NULL);
+ gpio_request(GPIO_PTX5, NULL);
+ gpio_direction_input(GPIO_PTX5);
+ sh_eth_init();
+
if (sw & SW41_B) {
/* SVGA */
lcdc_info.ch[0].lcd_cfg.xres = 800;
@@ -437,7 +577,7 @@ static int __init devices_setup(void)
}
return platform_add_devices(ms7724se_devices,
- ARRAY_SIZE(ms7724se_devices));
+ ARRAY_SIZE(ms7724se_devices));
}
device_initcall(devices_setup);
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index da627d22c009..b18cfd39cac6 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -309,7 +309,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
+CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
#
# Bus options
@@ -858,7 +858,35 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -870,6 +898,27 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+CONFIG_LOGO_SUPERH_VGA16=y
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index 3840270283e4..3ee783a0a075 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30
-# Thu Jun 18 16:09:05 2009
+# Mon Jun 29 16:28:43 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -88,10 +91,12 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
@@ -107,6 +112,10 @@ CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
@@ -119,7 +128,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -584,7 +593,6 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
@@ -624,7 +632,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
-# CONFIG_SH_ETH is not set
+CONFIG_SH_ETH=y
CONFIG_SMC91X=y
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
@@ -801,6 +809,11 @@ CONFIG_SPI_BITBANG=y
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
@@ -851,6 +864,8 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
@@ -1196,6 +1211,7 @@ CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1260,6 +1276,7 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h
index a8153c2aa6fa..d8e6bb9c0ccc 100644
--- a/arch/sh/include/asm/perf_counter.h
+++ b/arch/sh/include/asm/perf_counter.h
@@ -2,6 +2,8 @@
#define __ASM_SH_PERF_COUNTER_H
/* SH only supports software counters through this interface. */
-#define set_perf_counter_pending() do { } while (0)
+static inline void set_perf_counter_pending(void) {}
+
+#define PERF_COUNTER_INDEX_OFFSET 0
#endif /* __ASM_SH_PERF_COUNTER_H */
diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h
index 5bc34681d994..6f83f2cc45c1 100644
--- a/arch/sh/include/asm/syscall_32.h
+++ b/arch/sh/include/asm/syscall_32.h
@@ -3,6 +3,7 @@
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/err.h>
#include <asm/ptrace.h>
/* The system call number is given by the user in R3 */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index f09ac4806294..d570ac2e5cb9 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -51,7 +51,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h
index 74164b60d0db..29514a39d0f5 100644
--- a/arch/sh/include/mach-se/mach/se7724.h
+++ b/arch/sh/include/mach-se/mach/se7724.h
@@ -20,6 +20,11 @@
*/
#include <asm/addrspace.h>
+/* SH Eth */
+#define SH_ETH_ADDR (0xA4600000)
+#define SH_ETH_MAHR (SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR (SH_ETH_ADDR + 0x1C8)
+
#define PA_LED (0xba203000) /* 8bit LED */
#define IRQ_MODE (0xba200010)
#define IRQ0_SR (0xba200014)
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index cc8ddbdf3d7a..71925946f1e1 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -15,12 +15,28 @@
#include <linux/mm.h>
#include <linux/hardirq.h>
#include <linux/kprobes.h>
-#include <linux/marker.h>
+#include <linux/perf_counter.h>
#include <asm/io_trapped.h>
#include <asm/system.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
+static inline int notify_page_fault(struct pt_regs *regs, int trap)
+{
+ int ret = 0;
+
+#ifdef CONFIG_KPROBES
+ if (!user_mode(regs)) {
+ preempt_disable();
+ if (kprobe_running() && kprobe_fault_handler(regs, trap))
+ ret = 1;
+ preempt_enable();
+ }
+#endif
+
+ return ret;
+}
+
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
@@ -87,13 +103,16 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
return;
}
+ mm = tsk->mm;
+
+ if (unlikely(notify_page_fault(regs, lookup_exception_vector())))
+ return;
+
/* Only enable interrupts if they were on before the fault */
- if ((regs->sr & SR_IMASK) != SR_IMASK) {
- trace_hardirqs_on();
+ if ((regs->sr & SR_IMASK) != SR_IMASK)
local_irq_enable();
- }
- mm = tsk->mm;
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
/*
* If we're in an interrupt or have no user
@@ -141,10 +160,15 @@ survive:
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+ if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
- else
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+ regs, address);
+ } else {
tsk->min_flt++;
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+ regs, address);
+ }
up_read(&mm->mmap_sem);
return;
@@ -245,22 +269,6 @@ do_sigbus:
goto no_context;
}
-static inline int notify_page_fault(struct pt_regs *regs, int trap)
-{
- int ret = 0;
-
-#ifdef CONFIG_KPROBES
- if (!user_mode(regs)) {
- preempt_disable();
- if (kprobe_running() && kprobe_fault_handler(regs, trap))
- ret = 1;
- preempt_enable();
- }
-#endif
-
- return ret;
-}
-
/*
* Called with interrupts disabled.
*/
@@ -273,12 +281,7 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
pmd_t *pmd;
pte_t *pte;
pte_t entry;
- int ret = 0;
-
- if (notify_page_fault(regs, lookup_exception_vector()))
- goto out;
-
- ret = 1;
+ int ret = 1;
/*
* We don't take page faults for P1, P2, and parts of P4, these
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index fcbb6e135cef..3ce40ea34824 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2003 Richard Curnow (/proc/tlb, bug fixes)
- * Copyright (C) 2003 Paul Mundt
+ * Copyright (C) 2003 - 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -20,6 +20,7 @@
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/smp.h>
+#include <linux/perf_counter.h>
#include <linux/interrupt.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -115,6 +116,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
/* Not an IO address, so reenable interrupts */
local_irq_enable();
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
@@ -195,10 +198,16 @@ survive:
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+
+ if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
- else
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+ regs, address);
+ } else {
tsk->min_flt++;
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+ regs, address);
+ }
/* If we get here, the page fault has been handled. Do the TLB refill
now from the newly-setup PTE, to avoid having to fault again right
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 96041a8d39e8..1ff0fd924756 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -15,7 +15,7 @@ quiet_cmd_elftoaout = ELFTOAOUT $@
ifeq ($(CONFIG_SPARC32),y)
quiet_cmd_piggy = PIGGY $@
- cmd_piggy = $(obj)/piggyback_32 $@ $(obj)/System.map $(ROOT_IMG)
+ cmd_piggy = $(obj)/piggyback_32 $@ System.map $(ROOT_IMG)
quiet_cmd_btfix = BTFIX $@
cmd_btfix = $(OBJDUMP) -x vmlinux | $(obj)/btfixupprep > $@
quiet_cmd_sysmap = SYSMAP $(obj)/System.map
@@ -58,7 +58,7 @@ $(obj)/image: $(obj)/btfix.o FORCE
$(obj)/zImage: $(obj)/image
$(call if_changed,strip)
-$(obj)/tftpboot.img: $(obj)/piggyback $(obj)/System.map $(obj)/image FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_32 System.map $(ROOT_IMG) FORCE
$(call if_changed,elftoaout)
$(call if_changed,piggy)
@@ -79,7 +79,7 @@ $(obj)/image: vmlinux FORCE
$(call if_changed,strip)
@echo ' kernel: $@ is ready'
-$(obj)/tftpboot.img: vmlinux $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
$(call if_changed,elftoaout)
$(call if_changed,piggy)
@echo ' kernel: $@ is ready'
diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c
index c9f500c1a8b2..e8dc9adfcd61 100644
--- a/arch/sparc/boot/piggyback_32.c
+++ b/arch/sparc/boot/piggyback_32.c
@@ -70,7 +70,7 @@ void die(char *str)
int main(int argc,char **argv)
{
static char aout_magic[] = { 0x01, 0x03, 0x01, 0x07 };
- unsigned char buffer[1024], *q, *r;
+ char buffer[1024], *q, *r;
unsigned int i, j, k, start, end, offset;
FILE *map;
struct stat s;
@@ -84,7 +84,7 @@ int main(int argc,char **argv)
while (fgets (buffer, 1024, map)) {
if (!strcmp (buffer + 8, " T start\n") || !strcmp (buffer + 16, " T start\n"))
start = strtoul (buffer, NULL, 16);
- else if (!strcmp (buffer + 8, " A end\n") || !strcmp (buffer + 16, " A end\n"))
+ else if (!strcmp (buffer + 8, " A _end\n") || !strcmp (buffer + 16, " A _end\n"))
end = strtoul (buffer, NULL, 16);
}
fclose (map);
diff --git a/arch/sparc/boot/piggyback_64.c b/arch/sparc/boot/piggyback_64.c
index de364bfed0bb..c63fd1b6bdd4 100644
--- a/arch/sparc/boot/piggyback_64.c
+++ b/arch/sparc/boot/piggyback_64.c
@@ -46,6 +46,7 @@ int main(int argc,char **argv)
struct stat s;
int image, tail;
+ start = end = 0;
if (stat (argv[3], &s) < 0) die (argv[3]);
map = fopen (argv[2], "r");
if (!map) die(argv[2]);
diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
index 0f7b0e5fb1c7..844d73a0340c 100644
--- a/arch/sparc/include/asm/thread_info_32.h
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -54,8 +54,6 @@ struct thread_info {
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#define INIT_THREAD_INFO(tsk) \
{ \
@@ -64,7 +62,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
index 65865726b283..1b45a7bbe407 100644
--- a/arch/sparc/include/asm/thread_info_64.h
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -125,8 +125,6 @@ struct thread_info {
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
@@ -135,7 +133,7 @@ struct thread_info {
.task = &tsk, \
.flags = ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT, \
.exec_domain = &default_exec_domain, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index bd075054942b..f0ee79055409 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -20,7 +20,6 @@
#include <linux/delay.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-#include <linux/bootmem.h>
#include <linux/irq.h>
#include <asm/ptrace.h>
@@ -914,25 +913,19 @@ void __cpuinit notrace sun4v_register_mondo_queues(int this_cpu)
tb->nonresum_qmask);
}
-static void __init alloc_one_mondo(unsigned long *pa_ptr, unsigned long qmask)
-{
- unsigned long size = PAGE_ALIGN(qmask + 1);
- void *p = __alloc_bootmem(size, size, 0);
- if (!p) {
- prom_printf("SUN4V: Error, cannot allocate mondo queue.\n");
- prom_halt();
- }
-
- *pa_ptr = __pa(p);
-}
-
-static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask)
+/* Each queue region must be a power of 2 multiple of 64 bytes in
+ * size. The base real address must be aligned to the size of the
+ * region. Thus, an 8KB queue must be 8KB aligned, for example.
+ */
+static void __init alloc_one_queue(unsigned long *pa_ptr, unsigned long qmask)
{
unsigned long size = PAGE_ALIGN(qmask + 1);
- void *p = __alloc_bootmem(size, size, 0);
+ unsigned long order = get_order(size);
+ unsigned long p;
+ p = __get_free_pages(GFP_KERNEL, order);
if (!p) {
- prom_printf("SUN4V: Error, cannot allocate kbuf page.\n");
+ prom_printf("SUN4V: Error, cannot allocate queue.\n");
prom_halt();
}
@@ -942,11 +935,11 @@ static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask)
static void __init init_cpu_send_mondo_info(struct trap_per_cpu *tb)
{
#ifdef CONFIG_SMP
- void *page;
+ unsigned long page;
BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64));
- page = alloc_bootmem_pages(PAGE_SIZE);
+ page = get_zeroed_page(GFP_KERNEL);
if (!page) {
prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n");
prom_halt();
@@ -965,13 +958,13 @@ static void __init sun4v_init_mondo_queues(void)
for_each_possible_cpu(cpu) {
struct trap_per_cpu *tb = &trap_block[cpu];
- alloc_one_mondo(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
- alloc_one_mondo(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
- alloc_one_mondo(&tb->resum_mondo_pa, tb->resum_qmask);
- alloc_one_kbuf(&tb->resum_kernel_buf_pa, tb->resum_qmask);
- alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
- alloc_one_kbuf(&tb->nonresum_kernel_buf_pa,
- tb->nonresum_qmask);
+ alloc_one_queue(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
+ alloc_one_queue(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
+ alloc_one_queue(&tb->resum_mondo_pa, tb->resum_qmask);
+ alloc_one_queue(&tb->resum_kernel_buf_pa, tb->resum_qmask);
+ alloc_one_queue(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
+ alloc_one_queue(&tb->nonresum_kernel_buf_pa,
+ tb->nonresum_qmask);
}
}
@@ -999,7 +992,7 @@ void __init init_IRQ(void)
kill_prom_timer();
size = sizeof(struct ino_bucket) * NUM_IVECS;
- ivector_table = alloc_bootmem(size);
+ ivector_table = kzalloc(size, GFP_KERNEL);
if (!ivector_table) {
prom_printf("Fatal error, cannot allocate ivector_table\n");
prom_halt();
diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index 5ec17563142e..dd2aadc14af0 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -30,7 +30,6 @@ static void slip_init(struct net_device *dev, void *data)
slip_proto_init(&spri->slip);
- dev->init = NULL;
dev->hard_header_len = 0;
dev->header_ops = NULL;
dev->addr_len = 0;
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index f15a6e7654f3..e376284f0fb7 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -32,7 +32,6 @@ void slirp_init(struct net_device *dev, void *data)
slip_proto_init(&spri->slip);
- dev->init = NULL;
dev->hard_header_len = 0;
dev->header_ops = NULL;
dev->addr_len = 0;
diff --git a/arch/um/include/asm/dma-mapping.h b/arch/um/include/asm/dma-mapping.h
index 90fc708b320e..378de4bbf49f 100644
--- a/arch/um/include/asm/dma-mapping.h
+++ b/arch/um/include/asm/dma-mapping.h
@@ -79,14 +79,14 @@ dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
}
static inline void
-dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size,
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
enum dma_data_direction direction)
{
BUG();
}
static inline void
-dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems,
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
enum dma_data_direction direction)
{
BUG();
diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h
index 62274ab9471f..fd911f855367 100644
--- a/arch/um/include/asm/thread_info.h
+++ b/arch/um/include/asm/thread_info.h
@@ -32,7 +32,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c
index 56d43d0a3960..0960de54495a 100644
--- a/arch/um/kernel/sysrq.c
+++ b/arch/um/kernel/sysrq.c
@@ -70,8 +70,8 @@ void show_stack(struct task_struct *task, unsigned long *esp)
if (kstack_end(stack))
break;
if (i && ((i % 8) == 0))
- printk("\n" KERN_INFO " ");
- printk("%08lx ", *stack++);
+ printk(KERN_INFO " ");
+ printk(KERN_CONT "%08lx ", *stack++);
}
show_trace(task, esp);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d1430ef6b4f9..738bdc6b0f8b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1913,25 +1913,26 @@ config DMAR_DEFAULT_ON
recommended you say N here while the DMAR code remains
experimental.
-config DMAR_GFX_WA
- def_bool y
- prompt "Support for Graphics workaround"
+config DMAR_BROKEN_GFX_WA
+ def_bool n
+ prompt "Workaround broken graphics drivers (going away soon)"
depends on DMAR
---help---
Current Graphics drivers tend to use physical address
for DMA and avoid using DMA APIs. Setting this config
option permits the IOMMU driver to set a unity map for
all the OS-visible memory. Hence the driver can continue
- to use physical addresses for DMA.
+ to use physical addresses for DMA, at least until this
+ option is removed in the 2.6.32 kernel.
config DMAR_FLOPPY_WA
def_bool y
depends on DMAR
---help---
- Floppy disk drivers are know to bypass DMA API calls
+ Floppy disk drivers are known to bypass DMA API calls
thereby failing to work when IOMMU is enabled. This
workaround will setup a 1:1 mapping for the first
- 16M to make floppy (an ISA device) work.
+ 16MiB to make floppy (an ISA device) work.
config INTR_REMAP
bool "Support for Interrupt Remapping (EXPERIMENTAL)"
diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c
index d660be492363..49e0c18833e0 100644
--- a/arch/x86/boot/video-bios.c
+++ b/arch/x86/boot/video-bios.c
@@ -37,14 +37,13 @@ static int set_bios_mode(u8 mode)
ireg.al = mode; /* AH=0x00 Set Video Mode */
intcall(0x10, &ireg, NULL);
-
ireg.ah = 0x0f; /* Get Current Video Mode */
intcall(0x10, &ireg, &oreg);
do_restore = 1; /* Assume video contents were lost */
/* Not all BIOSes are clean with the top bit */
- new_mode = ireg.al & 0x7f;
+ new_mode = oreg.al & 0x7f;
if (new_mode == mode)
return 0; /* Mode change OK */
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index c700147d6ffb..275dd177f198 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -45,7 +45,7 @@ static int vesa_probe(void)
ireg.di = (size_t)&vginfo;
intcall(0x10, &ireg, &oreg);
- if (ireg.ax != 0x004f ||
+ if (oreg.ax != 0x004f ||
vginfo.signature != VESA_MAGIC ||
vginfo.version < 0x0102)
return 0; /* Not present */
@@ -70,7 +70,7 @@ static int vesa_probe(void)
ireg.di = (size_t)&vminfo;
intcall(0x10, &ireg, &oreg);
- if (ireg.ax != 0x004f)
+ if (oreg.ax != 0x004f)
continue;
if ((vminfo.mode_attr & 0x15) == 0x05) {
diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
index 2503d4e64c2a..dc5a667ff791 100644
--- a/arch/x86/include/asm/atomic_32.h
+++ b/arch/x86/include/asm/atomic_32.h
@@ -19,7 +19,10 @@
*
* Atomically reads the value of @v.
*/
-#define atomic_read(v) ((v)->counter)
+static inline int atomic_read(const atomic_t *v)
+{
+ return v->counter;
+}
/**
* atomic_set - set atomic variable
@@ -28,7 +31,10 @@
*
* Atomically sets the value of @v to @i.
*/
-#define atomic_set(v, i) (((v)->counter) = (i))
+static inline void atomic_set(atomic_t *v, int i)
+{
+ v->counter = i;
+}
/**
* atomic_add - add integer to atomic variable
@@ -200,8 +206,15 @@ static inline int atomic_sub_return(int i, atomic_t *v)
return atomic_add_return(-i, v);
}
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ return cmpxchg(&v->counter, old, new);
+}
+
+static inline int atomic_xchg(atomic_t *v, int new)
+{
+ return xchg(&v->counter, new);
+}
/**
* atomic_add_unless - add unless the number is already a given value
@@ -250,45 +263,12 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
/* An 64bit atomic type */
typedef struct {
- unsigned long long counter;
+ u64 __aligned(8) counter;
} atomic64_t;
#define ATOMIC64_INIT(val) { (val) }
-/**
- * atomic64_read - read atomic64 variable
- * @ptr: pointer of type atomic64_t
- *
- * Atomically reads the value of @v.
- * Doesn't imply a read memory barrier.
- */
-#define __atomic64_read(ptr) ((ptr)->counter)
-
-static inline unsigned long long
-cmpxchg8b(unsigned long long *ptr, unsigned long long old, unsigned long long new)
-{
- asm volatile(
-
- LOCK_PREFIX "cmpxchg8b (%[ptr])\n"
-
- : "=A" (old)
-
- : [ptr] "D" (ptr),
- "A" (old),
- "b" (ll_low(new)),
- "c" (ll_high(new))
-
- : "memory");
-
- return old;
-}
-
-static inline unsigned long long
-atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val,
- unsigned long long new_val)
-{
- return cmpxchg8b(&ptr->counter, old_val, new_val);
-}
+extern u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val);
/**
* atomic64_xchg - xchg atomic64 variable
@@ -298,18 +278,7 @@ atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val,
* Atomically xchgs the value of @ptr to @new_val and returns
* the old value.
*/
-
-static inline unsigned long long
-atomic64_xchg(atomic64_t *ptr, unsigned long long new_val)
-{
- unsigned long long old_val;
-
- do {
- old_val = atomic_read(ptr);
- } while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
-
- return old_val;
-}
+extern u64 atomic64_xchg(atomic64_t *ptr, u64 new_val);
/**
* atomic64_set - set atomic64 variable
@@ -318,10 +287,7 @@ atomic64_xchg(atomic64_t *ptr, unsigned long long new_val)
*
* Atomically sets the value of @ptr to @new_val.
*/
-static inline void atomic64_set(atomic64_t *ptr, unsigned long long new_val)
-{
- atomic64_xchg(ptr, new_val);
-}
+extern void atomic64_set(atomic64_t *ptr, u64 new_val);
/**
* atomic64_read - read atomic64 variable
@@ -329,17 +295,30 @@ static inline void atomic64_set(atomic64_t *ptr, unsigned long long new_val)
*
* Atomically reads the value of @ptr and returns it.
*/
-static inline unsigned long long atomic64_read(atomic64_t *ptr)
+static inline u64 atomic64_read(atomic64_t *ptr)
{
- unsigned long long curr_val;
-
- do {
- curr_val = __atomic64_read(ptr);
- } while (atomic64_cmpxchg(ptr, curr_val, curr_val) != curr_val);
-
- return curr_val;
+ u64 res;
+
+ /*
+ * Note, we inline this atomic64_t primitive because
+ * it only clobbers EAX/EDX and leaves the others
+ * untouched. We also (somewhat subtly) rely on the
+ * fact that cmpxchg8b returns the current 64-bit value
+ * of the memory location we are touching:
+ */
+ asm volatile(
+ "mov %%ebx, %%eax\n\t"
+ "mov %%ecx, %%edx\n\t"
+ LOCK_PREFIX "cmpxchg8b %1\n"
+ : "=&A" (res)
+ : "m" (*ptr)
+ );
+
+ return res;
}
+extern u64 atomic64_read(atomic64_t *ptr);
+
/**
* atomic64_add_return - add and return
* @delta: integer value to add
@@ -347,34 +326,14 @@ static inline unsigned long long atomic64_read(atomic64_t *ptr)
*
* Atomically adds @delta to @ptr and returns @delta + *@ptr
*/
-static inline unsigned long long
-atomic64_add_return(unsigned long long delta, atomic64_t *ptr)
-{
- unsigned long long old_val, new_val;
-
- do {
- old_val = atomic_read(ptr);
- new_val = old_val + delta;
-
- } while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
-
- return new_val;
-}
-
-static inline long atomic64_sub_return(unsigned long long delta, atomic64_t *ptr)
-{
- return atomic64_add_return(-delta, ptr);
-}
+extern u64 atomic64_add_return(u64 delta, atomic64_t *ptr);
-static inline long atomic64_inc_return(atomic64_t *ptr)
-{
- return atomic64_add_return(1, ptr);
-}
-
-static inline long atomic64_dec_return(atomic64_t *ptr)
-{
- return atomic64_sub_return(1, ptr);
-}
+/*
+ * Other variants with different arithmetic operators:
+ */
+extern u64 atomic64_sub_return(u64 delta, atomic64_t *ptr);
+extern u64 atomic64_inc_return(atomic64_t *ptr);
+extern u64 atomic64_dec_return(atomic64_t *ptr);
/**
* atomic64_add - add integer to atomic64 variable
@@ -383,10 +342,7 @@ static inline long atomic64_dec_return(atomic64_t *ptr)
*
* Atomically adds @delta to @ptr.
*/
-static inline void atomic64_add(unsigned long long delta, atomic64_t *ptr)
-{
- atomic64_add_return(delta, ptr);
-}
+extern void atomic64_add(u64 delta, atomic64_t *ptr);
/**
* atomic64_sub - subtract the atomic64 variable
@@ -395,10 +351,7 @@ static inline void atomic64_add(unsigned long long delta, atomic64_t *ptr)
*
* Atomically subtracts @delta from @ptr.
*/
-static inline void atomic64_sub(unsigned long long delta, atomic64_t *ptr)
-{
- atomic64_add(-delta, ptr);
-}
+extern void atomic64_sub(u64 delta, atomic64_t *ptr);
/**
* atomic64_sub_and_test - subtract value from variable and test result
@@ -409,13 +362,7 @@ static inline void atomic64_sub(unsigned long long delta, atomic64_t *ptr)
* true if the result is zero, or false for all
* other cases.
*/
-static inline int
-atomic64_sub_and_test(unsigned long long delta, atomic64_t *ptr)
-{
- unsigned long long old_val = atomic64_sub_return(delta, ptr);
-
- return old_val == 0;
-}
+extern int atomic64_sub_and_test(u64 delta, atomic64_t *ptr);
/**
* atomic64_inc - increment atomic64 variable
@@ -423,10 +370,7 @@ atomic64_sub_and_test(unsigned long long delta, atomic64_t *ptr)
*
* Atomically increments @ptr by 1.
*/
-static inline void atomic64_inc(atomic64_t *ptr)
-{
- atomic64_add(1, ptr);
-}
+extern void atomic64_inc(atomic64_t *ptr);
/**
* atomic64_dec - decrement atomic64 variable
@@ -434,10 +378,7 @@ static inline void atomic64_inc(atomic64_t *ptr)
*
* Atomically decrements @ptr by 1.
*/
-static inline void atomic64_dec(atomic64_t *ptr)
-{
- atomic64_sub(1, ptr);
-}
+extern void atomic64_dec(atomic64_t *ptr);
/**
* atomic64_dec_and_test - decrement and test
@@ -447,10 +388,7 @@ static inline void atomic64_dec(atomic64_t *ptr)
* returns true if the result is 0, or false for all other
* cases.
*/
-static inline int atomic64_dec_and_test(atomic64_t *ptr)
-{
- return atomic64_sub_and_test(1, ptr);
-}
+extern int atomic64_dec_and_test(atomic64_t *ptr);
/**
* atomic64_inc_and_test - increment and test
@@ -460,10 +398,7 @@ static inline int atomic64_dec_and_test(atomic64_t *ptr)
* and returns true if the result is zero, or false for all
* other cases.
*/
-static inline int atomic64_inc_and_test(atomic64_t *ptr)
-{
- return atomic64_sub_and_test(-1, ptr);
-}
+extern int atomic64_inc_and_test(atomic64_t *ptr);
/**
* atomic64_add_negative - add and test if negative
@@ -474,13 +409,7 @@ static inline int atomic64_inc_and_test(atomic64_t *ptr)
* if the result is negative, or false when
* result is greater than or equal to zero.
*/
-static inline int
-atomic64_add_negative(unsigned long long delta, atomic64_t *ptr)
-{
- long long old_val = atomic64_add_return(delta, ptr);
-
- return old_val < 0;
-}
+extern int atomic64_add_negative(u64 delta, atomic64_t *ptr);
#include <asm-generic/atomic-long.h>
#endif /* _ASM_X86_ATOMIC_32_H */
diff --git a/arch/x86/include/asm/atomic_64.h b/arch/x86/include/asm/atomic_64.h
index 0d6360220007..d605dc268e79 100644
--- a/arch/x86/include/asm/atomic_64.h
+++ b/arch/x86/include/asm/atomic_64.h
@@ -18,7 +18,10 @@
*
* Atomically reads the value of @v.
*/
-#define atomic_read(v) ((v)->counter)
+static inline int atomic_read(const atomic_t *v)
+{
+ return v->counter;
+}
/**
* atomic_set - set atomic variable
@@ -27,7 +30,10 @@
*
* Atomically sets the value of @v to @i.
*/
-#define atomic_set(v, i) (((v)->counter) = (i))
+static inline void atomic_set(atomic_t *v, int i)
+{
+ v->counter = i;
+}
/**
* atomic_add - add integer to atomic variable
@@ -192,7 +198,10 @@ static inline int atomic_sub_return(int i, atomic_t *v)
* Atomically reads the value of @v.
* Doesn't imply a read memory barrier.
*/
-#define atomic64_read(v) ((v)->counter)
+static inline long atomic64_read(const atomic64_t *v)
+{
+ return v->counter;
+}
/**
* atomic64_set - set atomic64 variable
@@ -201,7 +210,10 @@ static inline int atomic_sub_return(int i, atomic_t *v)
*
* Atomically sets the value of @v to @i.
*/
-#define atomic64_set(v, i) (((v)->counter) = (i))
+static inline void atomic64_set(atomic64_t *v, long i)
+{
+ v->counter = i;
+}
/**
* atomic64_add - add integer to atomic64 variable
@@ -355,11 +367,25 @@ static inline long atomic64_sub_return(long i, atomic64_t *v)
#define atomic64_inc_return(v) (atomic64_add_return(1, (v)))
#define atomic64_dec_return(v) (atomic64_sub_return(1, (v)))
-#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+static inline long atomic64_cmpxchg(atomic64_t *v, long old, long new)
+{
+ return cmpxchg(&v->counter, old, new);
+}
+
+static inline long atomic64_xchg(atomic64_t *v, long new)
+{
+ return xchg(&v->counter, new);
+}
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+static inline long atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ return cmpxchg(&v->counter, old, new);
+}
+
+static inline long atomic_xchg(atomic_t *v, int new)
+{
+ return xchg(&v->counter, new);
+}
/**
* atomic_add_unless - add unless the number is a given value
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 418e632d4a80..7a1065958ba9 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -8,7 +8,7 @@
#ifdef __KERNEL__
-#include <asm/page_types.h>
+#include <asm/pgtable_types.h>
/* Physical address where kernel should be loaded. */
#define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
@@ -16,10 +16,10 @@
& ~(CONFIG_PHYSICAL_ALIGN - 1))
/* Minimum kernel alignment, as a power of two */
-#ifdef CONFIG_x86_64
+#ifdef CONFIG_X86_64
#define MIN_KERNEL_ALIGN_LG2 PMD_SHIFT
#else
-#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT+1)
+#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT + THREAD_ORDER)
#endif
#define MIN_KERNEL_ALIGN (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 2d81af3974a0..7b2d71df39a6 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -111,12 +111,9 @@ enum fixed_addresses {
#ifdef CONFIG_PARAVIRT
FIX_PARAVIRT_BOOTMAP,
#endif
- FIX_TEXT_POKE0, /* reserve 2 pages for text_poke() */
- FIX_TEXT_POKE1,
+ FIX_TEXT_POKE1, /* reserve 2 pages for text_poke() */
+ FIX_TEXT_POKE0, /* first page is last, because allocation is backward */
__end_of_permanent_fixed_addresses,
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
- FIX_OHCI1394_BASE,
-#endif
/*
* 256 temporary boot-time mappings, used by early_ioremap(),
* before ioremap() is functional.
@@ -129,6 +126,9 @@ enum fixed_addresses {
FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
(__end_of_permanent_fixed_addresses & 255),
FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+ FIX_OHCI1394_BASE,
+#endif
#ifdef CONFIG_X86_32
FIX_WP_TEST,
#endif
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 1692fb5050e3..6be7fc254b59 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -246,10 +246,6 @@
#define MSR_IA32_MISC_ENABLE_TURBO_DISABLE (1ULL << 38)
#define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE (1ULL << 39)
-/* Intel Model 6 */
-#define MSR_P6_EVNTSEL0 0x00000186
-#define MSR_P6_EVNTSEL1 0x00000187
-
/* P4/Xeon+ specific */
#define MSR_IA32_MCG_EAX 0x00000180
#define MSR_IA32_MCG_EBX 0x00000181
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index c97264409934..c86e5ed4af51 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -72,7 +72,6 @@ void lapic_watchdog_stop(void);
int lapic_watchdog_init(unsigned nmi_hz);
int lapic_wd_event(unsigned nmi_hz);
unsigned lapic_adjust_nmi_hz(unsigned hz);
-int lapic_watchdog_ok(void);
void disable_lapic_nmi_watchdog(void);
void enable_lapic_nmi_watchdog(void);
void stop_nmi(void);
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 927958d13c19..1ff685ca221c 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -91,7 +91,7 @@ extern void pci_iommu_alloc(void);
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
-#if defined(CONFIG_X86_64) || defined(CONFIG_DMA_API_DEBUG)
+#if defined(CONFIG_X86_64) || defined(CONFIG_DMAR) || defined(CONFIG_DMA_API_DEBUG)
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 02ecb30982a3..103f1ddb0d85 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -42,6 +42,7 @@
#else /* ...!ASSEMBLY */
+#include <linux/kernel.h>
#include <linux/stringify.h>
#ifdef CONFIG_SMP
@@ -155,6 +156,15 @@ do { \
/* We can use this directly for local CPU (faster). */
DECLARE_PER_CPU(unsigned long, this_cpu_off);
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+void *pcpu_lpage_remapped(void *kaddr);
+#else
+static inline void *pcpu_lpage_remapped(void *kaddr)
+{
+ return NULL;
+}
+#endif
+
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_SMP
diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h
index 5fb33e160ea0..fa64e401589d 100644
--- a/arch/x86/include/asm/perf_counter.h
+++ b/arch/x86/include/asm/perf_counter.h
@@ -87,6 +87,9 @@ union cpuid10_edx {
#ifdef CONFIG_PERF_COUNTERS
extern void init_hw_perf_counters(void);
extern void perf_counters_lapic_init(void);
+
+#define PERF_COUNTER_INDEX_OFFSET 0
+
#else
static inline void init_hw_perf_counters(void) { }
static inline void perf_counters_lapic_init(void) { }
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index 49fb3ecf3bb3..621f56d73121 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -22,7 +22,14 @@ extern int reboot_force;
long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
-#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1))
-#define round_down(x, y) ((x) & ~((y) - 1))
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x,y) ((__typeof__(x))((y)-1))
+#define round_up(x,y) ((((x)-1) | __round_mask(x,y))+1)
+#define round_down(x,y) ((x) & ~__round_mask(x,y))
#endif /* _ASM_X86_PROTO_H */
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index b7e5db876399..4e77853321db 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -302,4 +302,8 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw)
#define _raw_read_relax(lock) cpu_relax()
#define _raw_write_relax(lock) cpu_relax()
+/* The {read|write|spin}_lock() on x86 are full memory barriers. */
+static inline void smp_mb__after_lock(void) { }
+#define ARCH_HAS_SMP_MB_AFTER_LOCK
+
#endif /* _ASM_X86_SPINLOCK_H */
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index f517944b2b17..cf86a5e73815 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -3,6 +3,8 @@
extern int kstack_depth_to_print;
+int x86_is_stack_id(int id, char *name);
+
/* Generic stack tracer with callbacks */
struct stacktrace_ops {
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index b0783520988b..fad7d40b75f8 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -49,7 +49,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 6c327b852e23..430d5b24af7b 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -26,6 +26,8 @@ CFLAGS_tsc.o := $(nostackp)
CFLAGS_paravirt.o := $(nostackp)
GCOV_PROFILE_vsyscall_64.o := n
GCOV_PROFILE_hpet.o := n
+GCOV_PROFILE_tsc.o := n
+GCOV_PROFILE_paravirt.o := n
obj-y := process_$(BITS).o signal.o entry_$(BITS).o
obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 9372f0406ad4..6c99f5037801 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1192,7 +1192,7 @@ out:
return 0;
}
-struct notifier_block device_nb = {
+static struct notifier_block device_nb = {
.notifier_call = device_change_notifier,
};
@@ -1763,7 +1763,7 @@ static void *alloc_coherent(struct device *dev, size_t size,
flag |= __GFP_ZERO;
virt_addr = (void *)__get_free_pages(flag, get_order(size));
if (!virt_addr)
- return 0;
+ return NULL;
paddr = virt_to_phys(virt_addr);
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 10b2accd12ea..c1b17e97252e 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -472,6 +472,8 @@ static u8 * __init alloc_event_buffer(struct amd_iommu *iommu)
if (iommu->evt_buf == NULL)
return NULL;
+ iommu->evt_buf_size = EVT_BUFFER_SIZE;
+
return iommu->evt_buf;
}
@@ -691,6 +693,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
devid = e->devid;
devid_to = e->ext >> 8;
+ set_dev_entry_from_acpi(iommu, devid , e->flags, 0);
set_dev_entry_from_acpi(iommu, devid_to, e->flags, 0);
amd_iommu_alias_table[devid] = devid_to;
break;
@@ -749,11 +752,13 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
devid = e->devid;
for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
- if (alias)
+ if (alias) {
amd_iommu_alias_table[dev_i] = devid_to;
- set_dev_entry_from_acpi(iommu,
- amd_iommu_alias_table[dev_i],
- flags, ext_flags);
+ set_dev_entry_from_acpi(iommu,
+ devid_to, flags, ext_flags);
+ }
+ set_dev_entry_from_acpi(iommu, dev_i,
+ flags, ext_flags);
}
break;
default:
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 8c7c042ecad1..0a1c2830ec66 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -140,7 +140,6 @@ int x2apic_mode;
#ifdef CONFIG_X86_X2APIC
/* x2apic enabled before OS handover */
static int x2apic_preenabled;
-static int disable_x2apic;
static __init int setup_nox2apic(char *str)
{
if (x2apic_enabled()) {
@@ -149,7 +148,6 @@ static __init int setup_nox2apic(char *str)
return 0;
}
- disable_x2apic = 1;
setup_clear_cpu_cap(X86_FEATURE_X2APIC);
return 0;
}
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 4d0216fcb36c..90b5e6efa938 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1716,25 +1716,19 @@ __apicdebuginit(void) print_IO_APIC(void)
return;
}
-__apicdebuginit(void) print_APIC_bitfield(int base)
+__apicdebuginit(void) print_APIC_field(int base)
{
- unsigned int v;
- int i, j;
+ int i;
if (apic_verbosity == APIC_QUIET)
return;
- printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
- for (i = 0; i < 8; i++) {
- v = apic_read(base + i*0x10);
- for (j = 0; j < 32; j++) {
- if (v & (1<<j))
- printk("1");
- else
- printk("0");
- }
- printk("\n");
- }
+ printk(KERN_DEBUG);
+
+ for (i = 0; i < 8; i++)
+ printk(KERN_CONT "%08x", apic_read(base + i*0x10));
+
+ printk(KERN_CONT "\n");
}
__apicdebuginit(void) print_local_APIC(void *dummy)
@@ -1745,7 +1739,7 @@ __apicdebuginit(void) print_local_APIC(void *dummy)
if (apic_verbosity == APIC_QUIET)
return;
- printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
+ printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
smp_processor_id(), hard_smp_processor_id());
v = apic_read(APIC_ID);
printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id());
@@ -1786,11 +1780,11 @@ __apicdebuginit(void) print_local_APIC(void *dummy)
printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
printk(KERN_DEBUG "... APIC ISR field:\n");
- print_APIC_bitfield(APIC_ISR);
+ print_APIC_field(APIC_ISR);
printk(KERN_DEBUG "... APIC TMR field:\n");
- print_APIC_bitfield(APIC_TMR);
+ print_APIC_field(APIC_TMR);
printk(KERN_DEBUG "... APIC IRR field:\n");
- print_APIC_bitfield(APIC_IRR);
+ print_APIC_field(APIC_IRR);
if (APIC_INTEGRATED(ver)) { /* !82489DX */
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index e5b27d8f1b47..28e5f5956042 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -258,13 +258,15 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_X86_HT
unsigned bits;
+ int cpu = smp_processor_id();
bits = c->x86_coreid_bits;
-
/* Low order bits define the core id (index of core in socket) */
c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
/* Convert the initial APIC ID into the socket ID */
c->phys_proc_id = c->initial_apicid >> bits;
+ /* use socket ID also for last level cache */
+ per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
#endif
}
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 6b26d4deada0..f1961c07af9a 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -848,9 +848,6 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
numa_add_cpu(smp_processor_id());
#endif
-
- /* Cap the iomem address space to what is addressable on all CPUs */
- iomem_resource.end &= (1ULL << c->x86_phys_bits) - 1;
}
#ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 81cbe64ed6b4..2a50ef891000 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -299,7 +299,7 @@ static int transition_pstate(struct powernow_k8_data *data, u32 pstate)
static int transition_fid_vid(struct powernow_k8_data *data,
u32 reqfid, u32 reqvid)
{
- if (core_voltage_pre_transition(data, reqvid))
+ if (core_voltage_pre_transition(data, reqvid, reqfid))
return 1;
if (core_frequency_transition(data, reqfid))
@@ -327,17 +327,20 @@ static int transition_fid_vid(struct powernow_k8_data *data,
/* Phase 1 - core voltage transition ... setup voltage */
static int core_voltage_pre_transition(struct powernow_k8_data *data,
- u32 reqvid)
+ u32 reqvid, u32 reqfid)
{
u32 rvosteps = data->rvo;
u32 savefid = data->currfid;
- u32 maxvid, lo;
+ u32 maxvid, lo, rvomult = 1;
dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
"reqvid 0x%x, rvo 0x%x\n",
smp_processor_id(),
data->currfid, data->currvid, reqvid, data->rvo);
+ if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP))
+ rvomult = 2;
+ rvosteps *= rvomult;
rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
maxvid = 0x1f & (maxvid >> 16);
dprintk("ph1 maxvid=0x%x\n", maxvid);
@@ -351,7 +354,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data,
return 1;
}
- while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
+ while ((rvosteps > 0) &&
+ ((rvomult * data->rvo + data->currvid) > reqvid)) {
if (data->currvid == maxvid) {
rvosteps = 0;
} else {
@@ -384,13 +388,6 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
u32 vcoreqfid, vcocurrfid, vcofiddiff;
u32 fid_interval, savevid = data->currvid;
- if ((reqfid < HI_FID_TABLE_BOTTOM) &&
- (data->currfid < HI_FID_TABLE_BOTTOM)) {
- printk(KERN_ERR PFX "ph2: illegal lo-lo transition "
- "0x%x 0x%x\n", reqfid, data->currfid);
- return 1;
- }
-
if (data->currfid == reqfid) {
printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n",
data->currfid);
@@ -407,6 +404,9 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
: vcoreqfid - vcocurrfid;
+ if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP))
+ vcofiddiff = 0;
+
while (vcofiddiff > 2) {
(data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
@@ -1081,14 +1081,6 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data,
return 0;
}
- if ((fid < HI_FID_TABLE_BOTTOM) &&
- (data->currfid < HI_FID_TABLE_BOTTOM)) {
- printk(KERN_ERR PFX
- "ignoring illegal change in lo freq table-%x to 0x%x\n",
- data->currfid, fid);
- return 1;
- }
-
dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
smp_processor_id(), fid, vid);
freqs.old = find_khz_freq_from_fid(data->currfid);
@@ -1267,7 +1259,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
{
static const char ACPI_PSS_BIOS_BUG_MSG[] =
KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
- KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n";
+ FW_BUG PFX "Try again with latest BIOS.\n";
struct powernow_k8_data *data;
struct init_on_cpu init_on_cpu;
int rc;
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index c9c1190b5e1f..02ce824073cb 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -215,7 +215,8 @@ struct pst_s {
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg)
-static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+ u32 reqvid, u32 regfid);
static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 284d1de968bc..484c1e5f658e 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -194,14 +194,14 @@ static void print_mce(struct mce *m)
m->cs, m->ip);
if (m->cs == __KERNEL_CS)
print_symbol("{%s}", m->ip);
- printk("\n");
+ printk(KERN_CONT "\n");
}
printk(KERN_EMERG "TSC %llx ", m->tsc);
if (m->addr)
- printk("ADDR %llx ", m->addr);
+ printk(KERN_CONT "ADDR %llx ", m->addr);
if (m->misc)
- printk("MISC %llx ", m->misc);
- printk("\n");
+ printk(KERN_CONT "MISC %llx ", m->misc);
+ printk(KERN_CONT "\n");
printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
m->cpuvendor, m->cpuid, m->time, m->socketid,
m->apicid);
@@ -209,13 +209,13 @@ static void print_mce(struct mce *m)
static void print_mce_head(void)
{
- printk(KERN_EMERG "\n" KERN_EMERG "HARDWARE ERROR\n");
+ printk(KERN_EMERG "\nHARDWARE ERROR\n");
}
static void print_mce_tail(void)
{
printk(KERN_EMERG "This is not a software problem!\n"
- KERN_EMERG "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+ "Run through mcelog --ascii to decode and contact your hardware vendor\n");
}
#define PANIC_TIMEOUT 5 /* 5 seconds */
@@ -1117,7 +1117,7 @@ static void mcheck_timer(unsigned long data)
*n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
t->expires = jiffies + *n;
- add_timer(t);
+ add_timer_on(t, smp_processor_id());
}
static void mce_do_trigger(struct work_struct *work)
@@ -1321,7 +1321,7 @@ static void mce_init_timer(void)
return;
setup_timer(t, mcheck_timer, smp_processor_id());
t->expires = round_jiffies(jiffies + *n);
- add_timer(t);
+ add_timer_on(t, smp_processor_id());
}
/*
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 76dfef23f789..36c3dc7b8991 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -401,7 +401,7 @@ static const u64 amd_hw_cache_event_ids
[ C(RESULT_MISS) ] = 0x0041, /* Data Cache Misses */
},
[ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x0042, /* Data Cache Refills from L2 */
+ [ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */
[ C(RESULT_MISS) ] = 0,
},
[ C(OP_PREFETCH) ] = {
@@ -912,6 +912,8 @@ x86_perf_counter_set_period(struct perf_counter *counter,
err = checking_wrmsrl(hwc->counter_base + idx,
(u64)(-left) & x86_pmu.counter_mask);
+ perf_counter_update_userpage(counter);
+
return ret;
}
@@ -969,13 +971,6 @@ fixed_mode_idx(struct perf_counter *counter, struct hw_perf_counter *hwc)
if (!x86_pmu.num_counters_fixed)
return -1;
- /*
- * Quirk, IA32_FIXED_CTRs do not work on current Atom processors:
- */
- if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
- boot_cpu_data.x86_model == 28)
- return -1;
-
event = hwc->config & ARCH_PERFMON_EVENT_MASK;
if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
@@ -1041,6 +1036,8 @@ try_generic:
x86_perf_counter_set_period(counter, hwc, idx);
x86_pmu.enable(hwc, idx);
+ perf_counter_update_userpage(counter);
+
return 0;
}
@@ -1133,6 +1130,8 @@ static void x86_pmu_disable(struct perf_counter *counter)
x86_perf_counter_update(counter, hwc, idx);
cpuc->counters[idx] = NULL;
clear_bit(idx, cpuc->used_mask);
+
+ perf_counter_update_userpage(counter);
}
/*
@@ -1428,8 +1427,6 @@ static int intel_pmu_init(void)
*/
x86_pmu.num_counters_fixed = max((int)edx.split.num_counters_fixed, 3);
- rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
-
/*
* Install the hw-cache-events table:
*/
@@ -1499,21 +1496,22 @@ void __init init_hw_perf_counters(void)
pr_cont("%s PMU driver.\n", x86_pmu.name);
if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) {
- x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
WARN(1, KERN_ERR "hw perf counters %d > max(%d), clipping!",
x86_pmu.num_counters, X86_PMC_MAX_GENERIC);
+ x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
}
perf_counter_mask = (1 << x86_pmu.num_counters) - 1;
perf_max_counters = x86_pmu.num_counters;
if (x86_pmu.num_counters_fixed > X86_PMC_MAX_FIXED) {
- x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
WARN(1, KERN_ERR "hw perf counters fixed %d > max(%d), clipping!",
x86_pmu.num_counters_fixed, X86_PMC_MAX_FIXED);
+ x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
}
perf_counter_mask |=
((1LL << x86_pmu.num_counters_fixed)-1) << X86_PMC_IDX_FIXED;
+ x86_pmu.intel_ctrl = perf_counter_mask;
perf_counters_lapic_init();
register_die_notifier(&perf_counter_nmi_notifier);
@@ -1563,6 +1561,7 @@ void callchain_store(struct perf_callchain_entry *entry, u64 ip)
static DEFINE_PER_CPU(struct perf_callchain_entry, irq_entry);
static DEFINE_PER_CPU(struct perf_callchain_entry, nmi_entry);
+static DEFINE_PER_CPU(int, in_nmi_frame);
static void
@@ -1578,7 +1577,9 @@ static void backtrace_warning(void *data, char *msg)
static int backtrace_stack(void *data, char *name)
{
- /* Process all stacks: */
+ per_cpu(in_nmi_frame, smp_processor_id()) =
+ x86_is_stack_id(NMI_STACK, name);
+
return 0;
}
@@ -1586,6 +1587,9 @@ static void backtrace_address(void *data, unsigned long addr, int reliable)
{
struct perf_callchain_entry *entry = data;
+ if (per_cpu(in_nmi_frame, smp_processor_id()))
+ return;
+
if (reliable)
callchain_store(entry, addr);
}
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 5c481f6205bf..e60ed740d2b3 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -803,8 +803,3 @@ int __kprobes lapic_wd_event(unsigned nmi_hz)
wd_ops->rearm(wd, nmi_hz);
return 1;
}
-
-int lapic_watchdog_ok(void)
-{
- return wd_ops != NULL;
-}
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 95ea5fa7d444..c8405718a4c3 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -22,6 +22,7 @@
#include "dumpstack.h"
int panic_on_unrecovered_nmi;
+int panic_on_io_nmi;
unsigned int code_bytes = 64;
int kstack_depth_to_print = 3 * STACKSLOTS_PER_LINE;
static int die_counter;
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index d593cd1f58dc..bca5fba91c9e 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -19,6 +19,12 @@
#include "dumpstack.h"
+/* Just a stub for now */
+int x86_is_stack_id(int id, char *name)
+{
+ return 0;
+}
+
void dump_trace(struct task_struct *task, struct pt_regs *regs,
unsigned long *stack, unsigned long bp,
const struct stacktrace_ops *ops, void *data)
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index d35db5993fd6..54b0a3276766 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -19,10 +19,8 @@
#include "dumpstack.h"
-static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
- unsigned *usedp, char **idp)
-{
- static char ids[][8] = {
+
+static char x86_stack_ids[][8] = {
[DEBUG_STACK - 1] = "#DB",
[NMI_STACK - 1] = "NMI",
[DOUBLEFAULT_STACK - 1] = "#DF",
@@ -33,6 +31,15 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]"
#endif
};
+
+int x86_is_stack_id(int id, char *name)
+{
+ return x86_stack_ids[id - 1] == name;
+}
+
+static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
+ unsigned *usedp, char **idp)
+{
unsigned k;
/*
@@ -61,7 +68,7 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
if (*usedp & (1U << k))
break;
*usedp |= 1U << k;
- *idp = ids[k];
+ *idp = x86_stack_ids[k];
return (unsigned long *)end;
}
/*
@@ -81,12 +88,13 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
do {
++j;
end -= EXCEPTION_STKSZ;
- ids[j][4] = '1' + (j - N_EXCEPTION_STACKS);
+ x86_stack_ids[j][4] = '1' +
+ (j - N_EXCEPTION_STACKS);
} while (stack < end - EXCEPTION_STKSZ);
if (*usedp & (1U << j))
break;
*usedp |= 1U << j;
- *idp = ids[j];
+ *idp = x86_stack_ids[j];
return (unsigned long *)end;
}
#endif
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 7271fa33d791..5cb5725b2bae 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -627,10 +627,9 @@ __init void e820_setup_gap(void)
#ifdef CONFIG_X86_64
if (!found) {
gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
- printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
- "address range\n"
- KERN_ERR "PCI: Unassigned devices with 32bit resource "
- "registers may break!\n");
+ printk(KERN_ERR
+ "PCI: Warning: Cannot find a gap in the 32bit address range\n"
+ "PCI: Unassigned devices with 32bit resource registers may break!\n");
}
#endif
@@ -1383,6 +1382,8 @@ static unsigned long ram_alignment(resource_size_t pos)
return 32*1024*1024;
}
+#define MAX_RESOURCE_SIZE ((resource_size_t)-1)
+
void __init e820_reserve_resources_late(void)
{
int i;
@@ -1400,17 +1401,19 @@ void __init e820_reserve_resources_late(void)
* avoid stolen RAM:
*/
for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *entry = &e820_saved.map[i];
- resource_size_t start, end;
+ struct e820entry *entry = &e820.map[i];
+ u64 start, end;
if (entry->type != E820_RAM)
continue;
start = entry->addr + entry->size;
- end = round_up(start, ram_alignment(start));
- if (start == end)
+ end = round_up(start, ram_alignment(start)) - 1;
+ if (end > MAX_RESOURCE_SIZE)
+ end = MAX_RESOURCE_SIZE;
+ if (start >= end)
continue;
- reserve_region_with_split(&iomem_resource, start,
- end - 1, "RAM buffer");
+ reserve_region_with_split(&iomem_resource, start, end,
+ "RAM buffer");
}
}
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index a78ecad0c900..c664d515f613 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -200,7 +200,7 @@ static void kvm_leave_lazy_mmu(void)
state->mode = paravirt_get_lazy_mode();
}
-static void paravirt_ops_setup(void)
+static void __init paravirt_ops_setup(void)
{
pv_info.name = "KVM";
pv_info.paravirt_enabled = 1;
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 47630479b067..1a041bcf506b 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -211,11 +211,11 @@ static __init int iommu_setup(char *p)
#ifdef CONFIG_SWIOTLB
if (!strncmp(p, "soft", 4))
swiotlb = 1;
+#endif
if (!strncmp(p, "pt", 2)) {
iommu_pass_through = 1;
return 1;
}
-#endif
gart_parse_options(p);
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index cfd9f9063896..d2e56b8f48e7 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -675,7 +675,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
nommu:
/* Should not happen anymore */
printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
- KERN_WARNING "falling back to iommu=soft.\n");
+ "falling back to iommu=soft.\n");
return -1;
}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index be5ae80f897f..de2cab132844 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -289,6 +289,20 @@ void * __init extend_brk(size_t size, size_t align)
return ret;
}
+#ifdef CONFIG_X86_64
+static void __init init_gbpages(void)
+{
+ if (direct_gbpages && cpu_has_gbpages)
+ printk(KERN_INFO "Using GB pages for direct mapping\n");
+ else
+ direct_gbpages = 0;
+}
+#else
+static inline void init_gbpages(void)
+{
+}
+#endif
+
static void __init reserve_brk(void)
{
if (_brk_end > _brk_start)
@@ -871,6 +885,8 @@ void __init setup_arch(char **cmdline_p)
reserve_brk();
+ init_gbpages();
+
/* max_pfn_mapped is updated here */
max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
max_pfn_mapped = max_low_pfn_mapped;
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 9c3f0823e6aa..29a3eef7cf4a 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -124,7 +124,7 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
}
/*
- * Remap allocator
+ * Large page remap allocator
*
* This allocator uses PMD page as unit. A PMD page is allocated for
* each cpu and each is remapped into vmalloc area using PMD mapping.
@@ -137,105 +137,185 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
* better than only using 4k mappings while still being NUMA friendly.
*/
#ifdef CONFIG_NEED_MULTIPLE_NODES
-static size_t pcpur_size __initdata;
-static void **pcpur_ptrs __initdata;
+struct pcpul_ent {
+ unsigned int cpu;
+ void *ptr;
+};
+
+static size_t pcpul_size;
+static struct pcpul_ent *pcpul_map;
+static struct vm_struct pcpul_vm;
-static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
+static struct page * __init pcpul_get_page(unsigned int cpu, int pageno)
{
size_t off = (size_t)pageno << PAGE_SHIFT;
- if (off >= pcpur_size)
+ if (off >= pcpul_size)
return NULL;
- return virt_to_page(pcpur_ptrs[cpu] + off);
+ return virt_to_page(pcpul_map[cpu].ptr + off);
}
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
{
- static struct vm_struct vm;
- size_t ptrs_size, dyn_size;
+ size_t map_size, dyn_size;
unsigned int cpu;
+ int i, j;
ssize_t ret;
- /*
- * If large page isn't supported, there's no benefit in doing
- * this. Also, on non-NUMA, embedding is better.
- *
- * NOTE: disabled for now.
- */
- if (true || !cpu_has_pse || !pcpu_need_numa())
+ if (!chosen) {
+ size_t vm_size = VMALLOC_END - VMALLOC_START;
+ size_t tot_size = num_possible_cpus() * PMD_SIZE;
+
+ /* on non-NUMA, embedding is better */
+ if (!pcpu_need_numa())
+ return -EINVAL;
+
+ /* don't consume more than 20% of vmalloc area */
+ if (tot_size > vm_size / 5) {
+ pr_info("PERCPU: too large chunk size %zuMB for "
+ "large page remap\n", tot_size >> 20);
+ return -EINVAL;
+ }
+ }
+
+ /* need PSE */
+ if (!cpu_has_pse) {
+ pr_warning("PERCPU: lpage allocator requires PSE\n");
return -EINVAL;
+ }
/*
* Currently supports only single page. Supporting multiple
* pages won't be too difficult if it ever becomes necessary.
*/
- pcpur_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
+ pcpul_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
PERCPU_DYNAMIC_RESERVE);
- if (pcpur_size > PMD_SIZE) {
+ if (pcpul_size > PMD_SIZE) {
pr_warning("PERCPU: static data is larger than large page, "
"can't use large page\n");
return -EINVAL;
}
- dyn_size = pcpur_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
+ dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
/* allocate pointer array and alloc large pages */
- ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
- pcpur_ptrs = alloc_bootmem(ptrs_size);
+ map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0]));
+ pcpul_map = alloc_bootmem(map_size);
for_each_possible_cpu(cpu) {
- pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE);
- if (!pcpur_ptrs[cpu])
+ pcpul_map[cpu].cpu = cpu;
+ pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE,
+ PMD_SIZE);
+ if (!pcpul_map[cpu].ptr) {
+ pr_warning("PERCPU: failed to allocate large page "
+ "for cpu%u\n", cpu);
goto enomem;
+ }
/*
- * Only use pcpur_size bytes and give back the rest.
+ * Only use pcpul_size bytes and give back the rest.
*
* Ingo: The 2MB up-rounding bootmem is needed to make
* sure the partial 2MB page is still fully RAM - it's
* not well-specified to have a PAT-incompatible area
* (unmapped RAM, device memory, etc.) in that hole.
*/
- free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size),
- PMD_SIZE - pcpur_size);
+ free_bootmem(__pa(pcpul_map[cpu].ptr + pcpul_size),
+ PMD_SIZE - pcpul_size);
- memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size);
+ memcpy(pcpul_map[cpu].ptr, __per_cpu_load, static_size);
}
/* allocate address and map */
- vm.flags = VM_ALLOC;
- vm.size = num_possible_cpus() * PMD_SIZE;
- vm_area_register_early(&vm, PMD_SIZE);
+ pcpul_vm.flags = VM_ALLOC;
+ pcpul_vm.size = num_possible_cpus() * PMD_SIZE;
+ vm_area_register_early(&pcpul_vm, PMD_SIZE);
for_each_possible_cpu(cpu) {
- pmd_t *pmd;
+ pmd_t *pmd, pmd_v;
- pmd = populate_extra_pmd((unsigned long)vm.addr
- + cpu * PMD_SIZE);
- set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpur_ptrs[cpu])),
- PAGE_KERNEL_LARGE));
+ pmd = populate_extra_pmd((unsigned long)pcpul_vm.addr +
+ cpu * PMD_SIZE);
+ pmd_v = pfn_pmd(page_to_pfn(virt_to_page(pcpul_map[cpu].ptr)),
+ PAGE_KERNEL_LARGE);
+ set_pmd(pmd, pmd_v);
}
/* we're ready, commit */
pr_info("PERCPU: Remapped at %p with large pages, static data "
- "%zu bytes\n", vm.addr, static_size);
+ "%zu bytes\n", pcpul_vm.addr, static_size);
- ret = pcpu_setup_first_chunk(pcpur_get_page, static_size,
+ ret = pcpu_setup_first_chunk(pcpul_get_page, static_size,
PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
- PMD_SIZE, vm.addr, NULL);
- goto out_free_ar;
+ PMD_SIZE, pcpul_vm.addr, NULL);
+
+ /* sort pcpul_map array for pcpu_lpage_remapped() */
+ for (i = 0; i < num_possible_cpus() - 1; i++)
+ for (j = i + 1; j < num_possible_cpus(); j++)
+ if (pcpul_map[i].ptr > pcpul_map[j].ptr) {
+ struct pcpul_ent tmp = pcpul_map[i];
+ pcpul_map[i] = pcpul_map[j];
+ pcpul_map[j] = tmp;
+ }
+
+ return ret;
enomem:
for_each_possible_cpu(cpu)
- if (pcpur_ptrs[cpu])
- free_bootmem(__pa(pcpur_ptrs[cpu]), PMD_SIZE);
- ret = -ENOMEM;
-out_free_ar:
- free_bootmem(__pa(pcpur_ptrs), ptrs_size);
- return ret;
+ if (pcpul_map[cpu].ptr)
+ free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size);
+ free_bootmem(__pa(pcpul_map), map_size);
+ return -ENOMEM;
+}
+
+/**
+ * pcpu_lpage_remapped - determine whether a kaddr is in pcpul recycled area
+ * @kaddr: the kernel address in question
+ *
+ * Determine whether @kaddr falls in the pcpul recycled area. This is
+ * used by pageattr to detect VM aliases and break up the pcpu PMD
+ * mapping such that the same physical page is not mapped under
+ * different attributes.
+ *
+ * The recycled area is always at the tail of a partially used PMD
+ * page.
+ *
+ * RETURNS:
+ * Address of corresponding remapped pcpu address if match is found;
+ * otherwise, NULL.
+ */
+void *pcpu_lpage_remapped(void *kaddr)
+{
+ void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
+ unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
+ int left = 0, right = num_possible_cpus() - 1;
+ int pos;
+
+ /* pcpul in use at all? */
+ if (!pcpul_map)
+ return NULL;
+
+ /* okay, perform binary search */
+ while (left <= right) {
+ pos = (left + right) / 2;
+
+ if (pcpul_map[pos].ptr < pmd_addr)
+ left = pos + 1;
+ else if (pcpul_map[pos].ptr > pmd_addr)
+ right = pos - 1;
+ else {
+ /* it shouldn't be in the area for the first chunk */
+ WARN_ON(offset < pcpul_size);
+
+ return pcpul_vm.addr +
+ pcpul_map[pos].cpu * PMD_SIZE + offset;
+ }
+ }
+
+ return NULL;
}
#else
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
{
return -EINVAL;
}
@@ -249,7 +329,7 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
* mapping so that it can use PMD mapping without additional TLB
* pressure.
*/
-static ssize_t __init setup_pcpu_embed(size_t static_size)
+static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
{
size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
@@ -258,7 +338,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size)
* this. Also, embedding allocation doesn't play well with
* NUMA.
*/
- if (!cpu_has_pse || pcpu_need_numa())
+ if (!chosen && (!cpu_has_pse || pcpu_need_numa()))
return -EINVAL;
return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
@@ -308,8 +388,11 @@ static ssize_t __init setup_pcpu_4k(size_t static_size)
void *ptr;
ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE);
- if (!ptr)
+ if (!ptr) {
+ pr_warning("PERCPU: failed to allocate "
+ "4k page for cpu%u\n", cpu);
goto enomem;
+ }
memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE);
pcpu4k_pages[j++] = virt_to_page(ptr);
@@ -333,6 +416,16 @@ out_free_ar:
return ret;
}
+/* for explicit first chunk allocator selection */
+static char pcpu_chosen_alloc[16] __initdata;
+
+static int __init percpu_alloc_setup(char *str)
+{
+ strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1);
+ return 0;
+}
+early_param("percpu_alloc", percpu_alloc_setup);
+
static inline void setup_percpu_segment(int cpu)
{
#ifdef CONFIG_X86_32
@@ -346,11 +439,6 @@ static inline void setup_percpu_segment(int cpu)
#endif
}
-/*
- * Great future plan:
- * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
- * Always point %gs to its beginning
- */
void __init setup_per_cpu_areas(void)
{
size_t static_size = __per_cpu_end - __per_cpu_start;
@@ -367,9 +455,26 @@ void __init setup_per_cpu_areas(void)
* of large page mappings. Please read comments on top of
* each allocator for details.
*/
- ret = setup_pcpu_remap(static_size);
- if (ret < 0)
- ret = setup_pcpu_embed(static_size);
+ ret = -EINVAL;
+ if (strlen(pcpu_chosen_alloc)) {
+ if (strcmp(pcpu_chosen_alloc, "4k")) {
+ if (!strcmp(pcpu_chosen_alloc, "lpage"))
+ ret = setup_pcpu_lpage(static_size, true);
+ else if (!strcmp(pcpu_chosen_alloc, "embed"))
+ ret = setup_pcpu_embed(static_size, true);
+ else
+ pr_warning("PERCPU: unknown allocator %s "
+ "specified\n", pcpu_chosen_alloc);
+ if (ret < 0)
+ pr_warning("PERCPU: %s allocator failed (%zd), "
+ "falling back to 4k\n",
+ pcpu_chosen_alloc, ret);
+ }
+ } else {
+ ret = setup_pcpu_lpage(static_size, false);
+ if (ret < 0)
+ ret = setup_pcpu_embed(static_size, false);
+ }
if (ret < 0)
ret = setup_pcpu_4k(static_size);
if (ret < 0)
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 124d40c575df..8ccabb8a2f6a 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -711,7 +711,6 @@ uv_activation_descriptor_init(int node, int pnode)
unsigned long pa;
unsigned long m;
unsigned long n;
- unsigned long mmr_image;
struct bau_desc *adp;
struct bau_desc *ad2;
@@ -727,12 +726,8 @@ uv_activation_descriptor_init(int node, int pnode)
n = pa >> uv_nshift;
m = pa & uv_mmask;
- mmr_image = uv_read_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE);
- if (mmr_image) {
- uv_write_global_mmr64(pnode, (unsigned long)
- UVH_LB_BAU_SB_DESCRIPTOR_BASE,
- (n << UV_DESC_BASE_PNODE_SHIFT | m));
- }
+ uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE,
+ (n << UV_DESC_BASE_PNODE_SHIFT | m));
/*
* initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index a0f48f5671c0..5204332f475d 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -346,6 +346,9 @@ io_check_error(unsigned char reason, struct pt_regs *regs)
printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n");
show_registers(regs);
+ if (panic_on_io_nmi)
+ panic("NMI IOCK error: Not continuing");
+
/* Re-enable the IOCK line, wait for a few seconds */
reason = (reason & 0xf) | 8;
outb(reason, 0x61);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 5c3d6e81a7dc..7030b5f911bf 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2157,7 +2157,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
else
/* 32 bits PSE 4MB page */
context->rsvd_bits_mask[1][1] = rsvd_bits(13, 21);
- context->rsvd_bits_mask[1][0] = ~0ull;
+ context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
break;
case PT32E_ROOT_LEVEL:
context->rsvd_bits_mask[0][2] =
@@ -2170,7 +2170,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 62) |
rsvd_bits(13, 20); /* large page */
- context->rsvd_bits_mask[1][0] = ~0ull;
+ context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
break;
case PT64_ROOT_LEVEL:
context->rsvd_bits_mask[0][3] = exb_bit_rsvd |
@@ -2186,7 +2186,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 51) |
rsvd_bits(13, 20); /* large page */
- context->rsvd_bits_mask[1][0] = ~0ull;
+ context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
break;
}
}
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 258e4591e1ca..67785f635399 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -281,7 +281,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
{
unsigned access = gw->pt_access;
struct kvm_mmu_page *shadow_page;
- u64 spte, *sptep;
+ u64 spte, *sptep = NULL;
int direct;
gfn_t table_gfn;
int r;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index e770bf349ec4..356a0ce85c68 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3012,6 +3012,12 @@ static int handle_vmcall(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
return 1;
}
+static int handle_vmx_insn(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ kvm_queue_exception(vcpu, UD_VECTOR);
+ return 1;
+}
+
static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
@@ -3198,6 +3204,15 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
[EXIT_REASON_HLT] = handle_halt,
[EXIT_REASON_INVLPG] = handle_invlpg,
[EXIT_REASON_VMCALL] = handle_vmcall,
+ [EXIT_REASON_VMCLEAR] = handle_vmx_insn,
+ [EXIT_REASON_VMLAUNCH] = handle_vmx_insn,
+ [EXIT_REASON_VMPTRLD] = handle_vmx_insn,
+ [EXIT_REASON_VMPTRST] = handle_vmx_insn,
+ [EXIT_REASON_VMREAD] = handle_vmx_insn,
+ [EXIT_REASON_VMRESUME] = handle_vmx_insn,
+ [EXIT_REASON_VMWRITE] = handle_vmx_insn,
+ [EXIT_REASON_VMOFF] = handle_vmx_insn,
+ [EXIT_REASON_VMON] = handle_vmx_insn,
[EXIT_REASON_TPR_BELOW_THRESHOLD] = handle_tpr_below_threshold,
[EXIT_REASON_APIC_ACCESS] = handle_apic_access,
[EXIT_REASON_WBINVD] = handle_wbinvd,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 249540f98513..fe5474aec41a 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -898,6 +898,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
case MSR_VM_HSAVE_PA:
case MSR_P6_EVNTSEL0:
case MSR_P6_EVNTSEL1:
+ case MSR_K7_EVNTSEL0:
data = 0;
break;
case MSR_MTRRcap:
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index c1b6c232e02b..616de4628d60 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1361,7 +1361,7 @@ static inline int writeback(struct x86_emulate_ctxt *ctxt,
return 0;
}
-void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
+static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
{
u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
/*
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index f9d35632666b..07c31899c9c2 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -10,6 +10,7 @@ lib-y += usercopy_$(BITS).o getuser.o putuser.o
lib-y += memcpy_$(BITS).o
ifeq ($(CONFIG_X86_32),y)
+ obj-y += atomic64_32.o
lib-y += checksum_32.o
lib-y += strstr_32.o
lib-y += semaphore_32.o string_32.o
diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
new file mode 100644
index 000000000000..824fa0be55a3
--- /dev/null
+++ b/arch/x86/lib/atomic64_32.c
@@ -0,0 +1,230 @@
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include <asm/processor.h>
+#include <asm/cmpxchg.h>
+#include <asm/atomic.h>
+
+static noinline u64 cmpxchg8b(u64 *ptr, u64 old, u64 new)
+{
+ u32 low = new;
+ u32 high = new >> 32;
+
+ asm volatile(
+ LOCK_PREFIX "cmpxchg8b %1\n"
+ : "+A" (old), "+m" (*ptr)
+ : "b" (low), "c" (high)
+ );
+ return old;
+}
+
+u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val)
+{
+ return cmpxchg8b(&ptr->counter, old_val, new_val);
+}
+EXPORT_SYMBOL(atomic64_cmpxchg);
+
+/**
+ * atomic64_xchg - xchg atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ * @new_val: value to assign
+ *
+ * Atomically xchgs the value of @ptr to @new_val and returns
+ * the old value.
+ */
+u64 atomic64_xchg(atomic64_t *ptr, u64 new_val)
+{
+ /*
+ * Try first with a (possibly incorrect) assumption about
+ * what we have there. We'll do two loops most likely,
+ * but we'll get an ownership MESI transaction straight away
+ * instead of a read transaction followed by a
+ * flush-for-ownership transaction:
+ */
+ u64 old_val, real_val = 0;
+
+ do {
+ old_val = real_val;
+
+ real_val = atomic64_cmpxchg(ptr, old_val, new_val);
+
+ } while (real_val != old_val);
+
+ return old_val;
+}
+EXPORT_SYMBOL(atomic64_xchg);
+
+/**
+ * atomic64_set - set atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ * @new_val: value to assign
+ *
+ * Atomically sets the value of @ptr to @new_val.
+ */
+void atomic64_set(atomic64_t *ptr, u64 new_val)
+{
+ atomic64_xchg(ptr, new_val);
+}
+EXPORT_SYMBOL(atomic64_set);
+
+/**
+EXPORT_SYMBOL(atomic64_read);
+ * atomic64_add_return - add and return
+ * @delta: integer value to add
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr and returns @delta + *@ptr
+ */
+noinline u64 atomic64_add_return(u64 delta, atomic64_t *ptr)
+{
+ /*
+ * Try first with a (possibly incorrect) assumption about
+ * what we have there. We'll do two loops most likely,
+ * but we'll get an ownership MESI transaction straight away
+ * instead of a read transaction followed by a
+ * flush-for-ownership transaction:
+ */
+ u64 old_val, new_val, real_val = 0;
+
+ do {
+ old_val = real_val;
+ new_val = old_val + delta;
+
+ real_val = atomic64_cmpxchg(ptr, old_val, new_val);
+
+ } while (real_val != old_val);
+
+ return new_val;
+}
+EXPORT_SYMBOL(atomic64_add_return);
+
+u64 atomic64_sub_return(u64 delta, atomic64_t *ptr)
+{
+ return atomic64_add_return(-delta, ptr);
+}
+EXPORT_SYMBOL(atomic64_sub_return);
+
+u64 atomic64_inc_return(atomic64_t *ptr)
+{
+ return atomic64_add_return(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_inc_return);
+
+u64 atomic64_dec_return(atomic64_t *ptr)
+{
+ return atomic64_sub_return(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_dec_return);
+
+/**
+ * atomic64_add - add integer to atomic64 variable
+ * @delta: integer value to add
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr.
+ */
+void atomic64_add(u64 delta, atomic64_t *ptr)
+{
+ atomic64_add_return(delta, ptr);
+}
+EXPORT_SYMBOL(atomic64_add);
+
+/**
+ * atomic64_sub - subtract the atomic64 variable
+ * @delta: integer value to subtract
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically subtracts @delta from @ptr.
+ */
+void atomic64_sub(u64 delta, atomic64_t *ptr)
+{
+ atomic64_add(-delta, ptr);
+}
+EXPORT_SYMBOL(atomic64_sub);
+
+/**
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @delta: integer value to subtract
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically subtracts @delta from @ptr and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+int atomic64_sub_and_test(u64 delta, atomic64_t *ptr)
+{
+ u64 new_val = atomic64_sub_return(delta, ptr);
+
+ return new_val == 0;
+}
+EXPORT_SYMBOL(atomic64_sub_and_test);
+
+/**
+ * atomic64_inc - increment atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically increments @ptr by 1.
+ */
+void atomic64_inc(atomic64_t *ptr)
+{
+ atomic64_add(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_inc);
+
+/**
+ * atomic64_dec - decrement atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically decrements @ptr by 1.
+ */
+void atomic64_dec(atomic64_t *ptr)
+{
+ atomic64_sub(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_dec);
+
+/**
+ * atomic64_dec_and_test - decrement and test
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically decrements @ptr by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+int atomic64_dec_and_test(atomic64_t *ptr)
+{
+ return atomic64_sub_and_test(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_dec_and_test);
+
+/**
+ * atomic64_inc_and_test - increment and test
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically increments @ptr by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+int atomic64_inc_and_test(atomic64_t *ptr)
+{
+ return atomic64_sub_and_test(-1, ptr);
+}
+EXPORT_SYMBOL(atomic64_inc_and_test);
+
+/**
+ * atomic64_add_negative - add and test if negative
+ * @delta: integer value to add
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+int atomic64_add_negative(u64 delta, atomic64_t *ptr)
+{
+ s64 new_val = atomic64_add_return(delta, ptr);
+
+ return new_val < 0;
+}
+EXPORT_SYMBOL(atomic64_add_negative);
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index 9a10a78bb4a4..ebeafcce04a9 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -5,15 +5,14 @@
* Zero a page.
* rdi page
*/
- ALIGN
-clear_page_c:
+ENTRY(clear_page_c)
CFI_STARTPROC
movl $4096/8,%ecx
xorl %eax,%eax
rep stosq
ret
CFI_ENDPROC
-ENDPROC(clear_page)
+ENDPROC(clear_page_c)
ENTRY(clear_page)
CFI_STARTPROC
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index f118c110af32..6ba0f7bb85ea 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -75,6 +75,7 @@ ENTRY(copy_to_user)
jae bad_to_user
ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
CFI_ENDPROC
+ENDPROC(copy_to_user)
/* Standard copy_from_user with segment limit checking */
ENTRY(copy_from_user)
diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
index f4568605d7d5..ff485d361182 100644
--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -55,8 +55,10 @@ static void delay_tsc(unsigned long loops)
preempt_disable();
cpu = smp_processor_id();
+ rdtsc_barrier();
rdtscl(bclock);
for (;;) {
+ rdtsc_barrier();
rdtscl(now);
if ((now - bclock) >= loops)
break;
@@ -78,6 +80,7 @@ static void delay_tsc(unsigned long loops)
if (unlikely(cpu != smp_processor_id())) {
loops -= (now - bclock);
cpu = smp_processor_id();
+ rdtsc_barrier();
rdtscl(bclock);
}
}
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index 7c8ca91bb9ec..1f118d462acc 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -751,7 +751,7 @@ survive:
if (retval == -ENOMEM && is_global_init(current)) {
up_read(&current->mm->mmap_sem);
- congestion_wait(WRITE, HZ/50);
+ congestion_wait(BLK_RW_ASYNC, HZ/50);
goto survive;
}
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 78a5fff857be..85307cc6e45f 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -426,10 +426,11 @@ static noinline int vmalloc_fault(unsigned long address)
}
static const char errata93_warning[] =
-KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
-KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
-KERN_ERR "******* Please consider a BIOS update.\n"
-KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
+KERN_ERR
+"******* Your BIOS seems to not contain a fix for K8 errata #93\n"
+"******* Working around it, but it may cause SEGVs or burn power.\n"
+"******* Please consider a BIOS update.\n"
+"******* Disabling USB legacy in the BIOS may also help.\n";
/*
* No vm86 mode in 64-bit mode:
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index f53b57e4086f..0607119cef94 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -12,6 +12,7 @@
#include <asm/system.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
+#include <asm/proto.h>
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -177,20 +178,6 @@ static int __meminit save_mr(struct map_range *mr, int nr_range,
return nr_range;
}
-#ifdef CONFIG_X86_64
-static void __init init_gbpages(void)
-{
- if (direct_gbpages && cpu_has_gbpages)
- printk(KERN_INFO "Using GB pages for direct mapping\n");
- else
- direct_gbpages = 0;
-}
-#else
-static inline void init_gbpages(void)
-{
-}
-#endif
-
/*
* Setup the direct mapping of the physical memory at PAGE_OFFSET.
* This runs before bootmem is initialized and gets pages directly from
@@ -210,9 +197,6 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
printk(KERN_INFO "init_memory_mapping: %016lx-%016lx\n", start, end);
- if (!after_bootmem)
- init_gbpages();
-
#if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KMEMCHECK)
/*
* For CONFIG_DEBUG_PAGEALLOC, identity mapping will use small pages.
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index c4378f4fd4a5..6176fe8f29e0 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -598,6 +598,15 @@ void __init paging_init(void)
sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
+
+ /*
+ * clear the default setting with node 0
+ * note: don't use nodes_clear here, that is really clearing when
+ * numa support is not compiled in, and later node_set_state
+ * will not set it back.
+ */
+ node_clear_state(0, N_NORMAL_MEMORY);
+
free_area_init_nodes(max_zone_pfns);
}
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 3cfe9ced8a4c..1b734d7a8966 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -11,6 +11,7 @@
#include <linux/interrupt.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
+#include <linux/pfn.h>
#include <asm/e820.h>
#include <asm/processor.h>
@@ -681,8 +682,9 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias);
static int cpa_process_alias(struct cpa_data *cpa)
{
struct cpa_data alias_cpa;
- int ret = 0;
- unsigned long temp_cpa_vaddr, vaddr;
+ unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT);
+ unsigned long vaddr, remapped;
+ int ret;
if (cpa->pfn >= max_pfn_mapped)
return 0;
@@ -706,42 +708,55 @@ static int cpa_process_alias(struct cpa_data *cpa)
PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)))) {
alias_cpa = *cpa;
- temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT);
- alias_cpa.vaddr = &temp_cpa_vaddr;
+ alias_cpa.vaddr = &laddr;
alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
-
ret = __change_page_attr_set_clr(&alias_cpa, 0);
+ if (ret)
+ return ret;
}
#ifdef CONFIG_X86_64
- if (ret)
- return ret;
/*
- * No need to redo, when the primary call touched the high
- * mapping already:
- */
- if (within(vaddr, (unsigned long) _text, _brk_end))
- return 0;
-
- /*
- * If the physical address is inside the kernel map, we need
+ * If the primary call didn't touch the high mapping already
+ * and the physical address is inside the kernel map, we need
* to touch the high mapped kernel as well:
*/
- if (!within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn()))
- return 0;
+ if (!within(vaddr, (unsigned long)_text, _brk_end) &&
+ within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn())) {
+ unsigned long temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) +
+ __START_KERNEL_map - phys_base;
+ alias_cpa = *cpa;
+ alias_cpa.vaddr = &temp_cpa_vaddr;
+ alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
- alias_cpa = *cpa;
- temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) + __START_KERNEL_map - phys_base;
- alias_cpa.vaddr = &temp_cpa_vaddr;
- alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+ /*
+ * The high mapping range is imprecise, so ignore the
+ * return value.
+ */
+ __change_page_attr_set_clr(&alias_cpa, 0);
+ }
+#endif
/*
- * The high mapping range is imprecise, so ignore the return value.
+ * If the PMD page was partially used for per-cpu remapping,
+ * the recycled area needs to be split and modified. Because
+ * the area is always proper subset of a PMD page
+ * cpa->numpages is guaranteed to be 1 for these areas, so
+ * there's no need to loop over and check for further remaps.
*/
- __change_page_attr_set_clr(&alias_cpa, 0);
-#endif
- return ret;
+ remapped = (unsigned long)pcpu_lpage_remapped((void *)laddr);
+ if (remapped) {
+ WARN_ON(cpa->numpages > 1);
+ alias_cpa = *cpa;
+ alias_cpa.vaddr = &remapped;
+ alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+ ret = __change_page_attr_set_clr(&alias_cpa, 0);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index b07dd8d0b321..89b9a5cd63da 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -390,7 +390,7 @@ static int __init p4_init(char **cpu_type)
static int force_arch_perfmon;
static int force_cpu_type(const char *str, struct kernel_param *kp)
{
- if (!strcmp(str, "archperfmon")) {
+ if (!strcmp(str, "arch_perfmon")) {
force_arch_perfmon = 1;
printk(KERN_INFO "oprofile: forcing architectural perfmon\n");
}
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index b26626dc517c..1014eb4bfc37 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -68,6 +68,10 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
unsigned long flags;
struct resource *root;
int max_root_bus_resources = PCI_BUS_NUM_RESOURCES;
+ u64 start, end;
+
+ if (bus_has_transparent_bridge(info->bus))
+ max_root_bus_resources -= 3;
status = resource_to_addr(acpi_res, &addr);
if (!ACPI_SUCCESS(status))
@@ -84,25 +88,24 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
} else
return AE_OK;
- res = &info->res[info->res_num];
- res->name = info->name;
- res->flags = flags;
- res->start = addr.minimum + addr.translation_offset;
- res->end = res->start + addr.address_length - 1;
- res->child = NULL;
-
- if (bus_has_transparent_bridge(info->bus))
- max_root_bus_resources -= 3;
+ start = addr.minimum + addr.translation_offset;
+ end = start + addr.address_length - 1;
if (info->res_num >= max_root_bus_resources) {
printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx "
"from %s for %s due to _CRS returning more than "
- "%d resource descriptors\n", (unsigned long) res->start,
- (unsigned long) res->end, root->name, info->name,
+ "%d resource descriptors\n", (unsigned long) start,
+ (unsigned long) end, root->name, info->name,
max_root_bus_resources);
- info->res_num++;
return AE_OK;
}
+ res = &info->res[info->res_num];
+ res->name = info->name;
+ res->flags = flags;
+ res->start = start;
+ res->end = end;
+ res->child = NULL;
+
if (insert_resource(root, res)) {
printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx "
"from %s for %s\n", (unsigned long) res->start,
@@ -115,23 +118,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
}
static void
-adjust_transparent_bridge_resources(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- int i;
- u16 class = dev->class >> 8;
-
- if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) {
- for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
- dev->subordinate->resource[i] =
- dev->bus->resource[i - 3];
- }
- }
-}
-
-static void
get_current_resources(struct acpi_device *device, int busnum,
int domain, struct pci_bus *bus)
{
@@ -158,8 +144,6 @@ get_current_resources(struct acpi_device *device, int busnum,
info.res_num = 0;
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
&info);
- if (info.res_num)
- adjust_transparent_bridge_resources(bus);
return;
@@ -222,8 +206,15 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
*/
memcpy(bus->sysdata, sd, sizeof(*sd));
kfree(sd);
- } else
- bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
+ } else {
+ bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd);
+ if (bus) {
+ if (pci_probe & PCI_USE__CRS)
+ get_current_resources(device, busnum, domain,
+ bus);
+ bus->subordinate = pci_scan_child_bus(bus);
+ }
+ }
if (!bus)
kfree(sd);
@@ -238,8 +229,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
#endif
}
- if (bus && (pci_probe & PCI_USE__CRS))
- get_current_resources(device, busnum, domain, bus);
return bus;
}
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index f893d6a6e803..3ffa10df20b9 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -100,8 +100,9 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b)
int j;
struct pci_root_info *info;
- /* don't go for it if _CRS is used */
- if (pci_probe & PCI_USE__CRS)
+ /* don't go for it if _CRS is used already */
+ if (b->resource[0] != &ioport_resource ||
+ b->resource[1] != &iomem_resource)
return;
/* if only one root bus, don't need to anything */
@@ -116,6 +117,9 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b)
if (i == pci_root_num)
return;
+ printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n",
+ b->number);
+
info = &pci_root_info[i];
for (j = 0; j < info->res_num; j++) {
struct resource *res;
diff --git a/arch/x86/power/Makefile b/arch/x86/power/Makefile
index de2abbd07544..a6a198c33623 100644
--- a/arch/x86/power/Makefile
+++ b/arch/x86/power/Makefile
@@ -1,7 +1,7 @@
# __restore_processor_state() restores %gs after S3 resume and so should not
# itself be stack-protected
nostackp := $(call cc-option, -fno-stack-protector)
-CFLAGS_cpu_$(BITS).o := $(nostackp)
+CFLAGS_cpu.o := $(nostackp)
obj-$(CONFIG_PM_SLEEP) += cpu.o
obj-$(CONFIG_HIBERNATION) += hibernate_$(BITS).o hibernate_asm_$(BITS).o
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index d277ef1eea51..b3d20b9cac63 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -244,7 +244,7 @@ static void __restore_processor_state(struct saved_context *ctxt)
do_fpu_end();
mtrr_ap_init();
-#ifdef CONFIG_X86_32
+#ifdef CONFIG_X86_OLD_MCE
mcheck_init(&boot_cpu_data);
#endif
}
diff --git a/arch/xtensa/include/asm/thread_info.h b/arch/xtensa/include/asm/thread_info.h
index 0f4fe1faf9ba..13165641cc51 100644
--- a/arch/xtensa/include/asm/thread_info.h
+++ b/arch/xtensa/include/asm/thread_info.h
@@ -80,8 +80,6 @@ struct thread_info {
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
@@ -92,7 +90,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index ba9ab9349782..e64efac3b9db 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -354,10 +354,10 @@ void show_regs(struct pt_regs * regs)
for (i = 0; i < 16; i++) {
if ((i % 8) == 0)
- printk ("\n" KERN_INFO "a%02d: ", i);
- printk("%08lx ", regs->areg[i]);
+ printk(KERN_INFO "a%02d:", i);
+ printk(KERN_CONT " %08lx", regs->areg[i]);
}
- printk("\n");
+ printk(KERN_CONT "\n");
printk("pc: %08lx, ps: %08lx, depc: %08lx, excvaddr: %08lx\n",
regs->pc, regs->ps, regs->depc, regs->excvaddr);
OpenPOWER on IntegriCloud