diff options
Diffstat (limited to 'arch')
1005 files changed, 70052 insertions, 15791 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index f7c96635d3b4..083c5df42d35 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -509,7 +509,7 @@ config NR_CPUS depends on SMP default "64" -config DISCONTIGMEM +config ARCH_DISCONTIGMEM_ENABLE bool "Discontiguous Memory Support (EXPERIMENTAL)" depends on EXPERIMENTAL help @@ -518,6 +518,8 @@ config DISCONTIGMEM or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa> for more. +source "mm/Kconfig" + config NUMA bool "NUMA Support (EXPERIMENTAL)" depends on DISCONTIGMEM @@ -594,6 +596,8 @@ source "fs/Kconfig.binfmt" endmenu +source "net/Kconfig" + source "drivers/Kconfig" source "fs/Kconfig" diff --git a/arch/alpha/defconfig b/arch/alpha/defconfig index 5e39b7a7c8f4..6da9c3dbde44 100644 --- a/arch/alpha/defconfig +++ b/arch/alpha/defconfig @@ -96,7 +96,7 @@ CONFIG_ALPHA_CORE_AGP=y CONFIG_ALPHA_BROKEN_IRQ_MASK=y CONFIG_EISA=y # CONFIG_SMP is not set -# CONFIG_DISCONTIGMEM is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_VERBOSE_MCHECK=y CONFIG_VERBOSE_MCHECK_ON=1 CONFIG_PCI_LEGACY_PROC=y diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c index e6ded33c6e22..9d34ce26e5ef 100644 --- a/arch/alpha/kernel/irq_alpha.c +++ b/arch/alpha/kernel/irq_alpha.c @@ -55,6 +55,8 @@ do_entInt(unsigned long type, unsigned long vector, #ifdef CONFIG_SMP { long cpu; + + local_irq_disable(); smp_percpu_timer_interrupt(regs); cpu = smp_processor_id(); if (cpu != boot_cpuid) { diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index 1f36bbd0ed5d..2a8b364c822e 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -350,8 +350,24 @@ pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, region->end = res->end - offset; } +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + struct pci_controller *hose = (struct pci_controller *)dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = hose->io_space->start; + else if (res->flags & IORESOURCE_MEM) + offset = hose->mem_space->start; + + res->start = region->start + offset; + res->end = region->end + offset; +} + #ifdef CONFIG_HOTPLUG EXPORT_SYMBOL(pcibios_resource_to_bus); +EXPORT_SYMBOL(pcibios_bus_to_resource); #endif int diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 4933f3ce5833..fa98dae3cd98 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -165,7 +165,6 @@ machine_restart(char *restart_cmd) common_shutdown(LINUX_REBOOT_CMD_RESTART, restart_cmd); } -EXPORT_SYMBOL(machine_restart); void machine_halt(void) @@ -173,7 +172,6 @@ machine_halt(void) common_shutdown(LINUX_REBOOT_CMD_HALT, NULL); } -EXPORT_SYMBOL(machine_halt); void machine_power_off(void) @@ -181,7 +179,6 @@ machine_power_off(void) common_shutdown(LINUX_REBOOT_CMD_POWER_OFF, NULL); } -EXPORT_SYMBOL(machine_power_off); /* Used by sysrq-p, among others. I don't believe r9-r15 are ever saved in the context it's used. */ diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index 052120882876..4342cea1a926 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -461,6 +461,11 @@ sys_call_table: .quad sys_add_key .quad sys_request_key /* 440 */ .quad sys_keyctl + .quad sys_ioprio_set + .quad sys_ioprio_get + .quad sys_inotify_init + .quad sys_inotify_add_watch /* 445 */ + .quad sys_inotify_rm_watch .size sys_call_table, . - sys_call_table .type sys_call_table, @object diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c index fd7bd17cc960..6f509a644bdd 100644 --- a/arch/alpha/kernel/traps.c +++ b/arch/alpha/kernel/traps.c @@ -240,7 +240,7 @@ do_entIF(unsigned long type, struct pt_regs *regs) siginfo_t info; int signo, code; - if (regs->ps == 0) { + if ((regs->ps & ~IPL_MAX) == 0) { if (type == 1) { const unsigned int *data = (const unsigned int *) regs->pc; diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c index ba81c4422aaf..c7481d59b6df 100644 --- a/arch/alpha/mm/numa.c +++ b/arch/alpha/mm/numa.c @@ -327,8 +327,6 @@ void __init mem_init(void) extern char _text, _etext, _data, _edata; extern char __init_begin, __init_end; unsigned long nid, i; - struct page * lmem_map; - high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT); reservedpages = 0; @@ -338,10 +336,10 @@ void __init mem_init(void) */ totalram_pages += free_all_bootmem_node(NODE_DATA(nid)); - lmem_map = node_mem_map(nid); pfn = NODE_DATA(nid)->node_start_pfn; for (i = 0; i < node_spanned_pages(nid); i++, pfn++) - if (page_is_ram(pfn) && PageReserved(lmem_map+i)) + if (page_is_ram(pfn) && + PageReserved(nid_page_nr(nid, i))) reservedpages++; } @@ -373,18 +371,18 @@ show_mem(void) show_free_areas(); printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); for_each_online_node(nid) { - struct page * lmem_map = node_mem_map(nid); i = node_spanned_pages(nid); while (i-- > 0) { + struct page *page = nid_page_nr(nid, i); total++; - if (PageReserved(lmem_map+i)) + if (PageReserved(page)) reserved++; - else if (PageSwapCache(lmem_map+i)) + else if (PageSwapCache(page)) cached++; - else if (!page_count(lmem_map+i)) + else if (!page_count(page)) free++; else - shared += page_count(lmem_map + i) - 1; + shared += page_count(page) - 1; } } printk("%ld pages of RAM\n",total); diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ee8a9ad7bbd9..7bc4a583f4e1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -157,7 +157,7 @@ config ARCH_RPC config ARCH_SA1100 bool "SA1100-based" select ISA - select DISCONTIGMEM + select ARCH_DISCONTIGMEM_ENABLE config ARCH_S3C2410 bool "Samsung S3C2410" @@ -223,7 +223,9 @@ source "arch/arm/mach-pxa/Kconfig" source "arch/arm/mach-sa1100/Kconfig" -source "arch/arm/mach-omap/Kconfig" +source "arch/arm/plat-omap/Kconfig" + +source "arch/arm/mach-omap1/Kconfig" source "arch/arm/mach-s3c2410/Kconfig" @@ -346,7 +348,27 @@ config PREEMPT Say Y here if you are building a kernel for a desktop, embedded or real-time system. Say N if you are unsure. -config DISCONTIGMEM +config NO_IDLE_HZ + bool "Dynamic tick timer" + help + Select this option if you want to disable continuous timer ticks + and have them programmed to occur as required. This option saves + power as the system can remain in idle state for longer. + + By default dynamic tick is disabled during the boot, and can be + manually enabled with: + + echo 1 > /sys/devices/system/timer/timer0/dyn_tick + + Alternatively, if you want dynamic tick automatically enabled + during boot, pass "dyntick=enable" via the kernel command string. + + Please note that dynamic tick may affect the accuracy of + timekeeping on some platforms depending on the implementation. + Currently at least OMAP platform is known to have accurate + timekeeping with dynamic tick. + +config ARCH_DISCONTIGMEM_ENABLE bool default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM) help @@ -355,6 +377,8 @@ config DISCONTIGMEM or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa> for more. +source "mm/Kconfig" + config LEDS bool "Timer and CPU usage LEDs" depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \ @@ -492,7 +516,7 @@ config XIP_PHYS_ADDR endmenu -if (ARCH_SA1100 || ARCH_INTEGRATOR) +if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1) menu "CPU Frequency scaling" @@ -676,6 +700,8 @@ config APM endmenu +source "net/Kconfig" + menu "Device Drivers" source "drivers/base/Kconfig" @@ -708,7 +734,7 @@ source "drivers/ieee1394/Kconfig" source "drivers/message/i2o/Kconfig" -source "net/Kconfig" +source "drivers/net/Kconfig" source "drivers/isdn/Kconfig" @@ -720,6 +746,8 @@ source "drivers/char/Kconfig" source "drivers/i2c/Kconfig" +source "drivers/hwmon/Kconfig" + #source "drivers/l3/Kconfig" source "drivers/misc/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 8330495e2448..67f1453ade05 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -56,7 +56,7 @@ tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) tune-$(CONFIG_CPU_V6) :=-mtune=strongarm # Need -Uarm for gcc < 3.x -CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,) CFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float @@ -91,7 +91,8 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000 machine-$(CONFIG_ARCH_IOP3XX) := iop3xx machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_IXP2000) := ixp2000 - machine-$(CONFIG_ARCH_OMAP) := omap + machine-$(CONFIG_ARCH_OMAP1) := omap1 + incdir-$(CONFIG_ARCH_OMAP) := omap machine-$(CONFIG_ARCH_S3C2410) := s3c2410 machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x machine-$(CONFIG_ARCH_VERSATILE) := versatile @@ -142,6 +143,9 @@ core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ +# If we have a common platform directory, then include it in the build. +core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/ + drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/ drivers-$(CONFIG_ARCH_L7200) += drivers/acorn/char/ diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S index 848f60e5429b..089c560e07f1 100644 --- a/arch/arm/boot/compressed/head-shark.S +++ b/arch/arm/boot/compressed/head-shark.S @@ -63,8 +63,8 @@ __beginning: mov r4, r0 @ save the entry to the firmware mov pc, r2 -__copy_target: .long 0x08508000 -__copy_end: .long 0x08608000 +__copy_target: .long 0x08507FFC +__copy_end: .long 0x08607FFC .word _start .word __bss_start @@ -73,9 +73,10 @@ __copy_end: .long 0x08608000 __temp_stack: .space 128 __mmu_off: - adr r0, __ofw_data + adr r0, __ofw_data @ read the 1. entry of the memory map ldr r0, [r0, #4] orr r0, r0, #0x00600000 + sub r0, r0, #4 ldr r1, __copy_end ldr r3, __copy_target @@ -89,20 +90,43 @@ __mmu_off: * from 0x08500000 to 0x08508000 if we have only 8MB */ +/* As we get more 2.6-kernels it gets more and more + * uncomfortable to be bound to kernel images of 1MB only. + * So we add a loop here, to be able to copy some more. + * Alexander Schulz 2005-07-17 + */ + + mov r4, #3 @ How many megabytes to copy + + +__MoveCode: sub r4, r4, #1 __Copy: ldr r2, [r0], #-4 str r2, [r1], #-4 teq r1, r3 bne __Copy + + /* The firmware maps us in blocks of 1 MB, the next block is + _below_ the last one. So our decrementing source pointer + ist right here, but the destination pointer must be increased + by 2 MB */ + add r1, r1, #0x00200000 + add r3, r3, #0x00100000 + + teq r4, #0 + bne __MoveCode + + /* and jump to it */ - adr r2, __go_on - adr r0, __ofw_data + adr r2, __go_on @ where we want to jump + adr r0, __ofw_data @ read the 1. entry of the memory map ldr r0, [r0, #4] - sub r2, r2, r0 - sub r2, r2, #0x00500000 - ldr r0, __copy_target + sub r2, r2, r0 @ we are mapped add 0e50 now, sub that (-0e00) + sub r2, r2, #0x00500000 @ -0050 + ldr r0, __copy_target @ and add 0850 8000 instead + add r0, r0, #4 add r2, r2, r0 - mov pc, r2 + mov pc, r2 @ and jump there __go_on: adr sp, __temp_stack diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh index 935bb27369e9..9f9bed207345 100644 --- a/arch/arm/boot/install.sh +++ b/arch/arm/boot/install.sh @@ -21,8 +21,8 @@ # # User may have a custom install script -if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi -if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi +if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi +if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi if [ "$(basename $2)" = "zImage" ]; then # Compressed install diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 9d63a01214eb..cbf2165476b0 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -93,15 +93,12 @@ static void print_alloc_stats(struct dmabounce_device_info *device_info) static inline struct dmabounce_device_info * find_dmabounce_dev(struct device *dev) { - struct list_head *entry; - - list_for_each(entry, &dmabounce_devs) { - struct dmabounce_device_info *d = - list_entry(entry, struct dmabounce_device_info, node); + struct dmabounce_device_info *d; + list_for_each_entry(d, &dmabounce_devs, node) if (d->dev == dev) return d; - } + return NULL; } @@ -172,15 +169,11 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr, static inline struct safe_buffer * find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_addr) { - struct list_head *entry; - - list_for_each(entry, &device_info->safe_buffers) { - struct safe_buffer *b = - list_entry(entry, struct safe_buffer, node); + struct safe_buffer *b; + list_for_each_entry(b, &device_info->safe_buffers, node) if (b->safe_dma_addr == safe_dma_addr) return b; - } return NULL; } @@ -301,7 +294,6 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, __func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr), buf->safe, (void *) buf->safe_dma_addr); - DO_STATS ( device_info->bounce_count++ ); if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) { diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 21fce3414ed1..38c2eb667eb9 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -721,16 +721,17 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) return ret; } +static int sa1111_remove_one(struct device *dev, void *data) +{ + device_unregister(dev); + return 0; +} + static void __sa1111_remove(struct sa1111 *sachip) { - struct list_head *l, *n; void __iomem *irqbase = sachip->base + SA1111_INTC; - list_for_each_safe(l, n, &sachip->dev->children) { - struct device *d = list_to_dev(l); - - device_unregister(d); - } + device_for_each_child(sachip->dev, NULL, sa1111_remove_one); /* disable all IRQs */ sa1111_writel(0, irqbase + SA1111_INTEN0); diff --git a/arch/arm/configs/bast_defconfig b/arch/arm/configs/bast_defconfig index 2d985e9611cd..35e3a99bcbb6 100644 --- a/arch/arm/configs/bast_defconfig +++ b/arch/arm/configs/bast_defconfig @@ -561,7 +561,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_S3C2410=y CONFIG_SERIAL_S3C2410_CONSOLE=y -CONFIG_SERIAL_BAST_SIO=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig index 06fae4b62774..f67ca01b4982 100644 --- a/arch/arm/configs/enp2611_defconfig +++ b/arch/arm/configs/enp2611_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 22:08:24 2005 +# Linux kernel version: 2.6.13-rc2 +# Thu Jul 7 16:41:21 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -82,6 +84,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -96,6 +99,7 @@ CONFIG_ARCH_ENP2611=y # CONFIG_ARCH_IXDP2800 is not set # CONFIG_ARCH_IXDP2401 is not set # CONFIG_ARCH_IXDP2801 is not set +# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set # # Processor Type @@ -106,7 +110,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -118,9 +121,11 @@ CONFIG_XSCALE_PMU=y # # Bus support # +CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -130,7 +135,16 @@ CONFIG_PCI_NAMES=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_ALIGNMENT_TRAP=y # @@ -269,7 +283,6 @@ CONFIG_MTD_IXP2000=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -308,6 +321,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -329,12 +343,12 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -349,6 +363,8 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set # CONFIG_IP_TCPDIAG is not set # CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set @@ -404,6 +420,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -440,9 +457,11 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -464,6 +483,7 @@ CONFIG_EEPRO100=y # Wan interfaces # CONFIG_WAN=y +# CONFIG_DSCC4 is not set # CONFIG_LANMEDIA is not set # CONFIG_SYNCLINK_SYNCPPP is not set CONFIG_HDLC=y @@ -526,7 +546,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -547,6 +566,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -613,17 +633,18 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_IXP2000 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set @@ -637,7 +658,9 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -653,6 +676,7 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -662,14 +686,19 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -723,6 +752,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -763,7 +793,6 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set @@ -801,12 +830,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig index 810a450a55d2..5c6c928215d0 100644 --- a/arch/arm/configs/ixdp2400_defconfig +++ b/arch/arm/configs/ixdp2400_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 21:13:38 2005 +# Linux kernel version: 2.6.13-rc2 +# Thu Jul 7 16:49:01 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -82,6 +84,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -97,6 +100,7 @@ CONFIG_ARCH_IXDP2400=y CONFIG_ARCH_IXDP2X00=y # CONFIG_ARCH_IXDP2401 is not set # CONFIG_ARCH_IXDP2801 is not set +# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set # # Processor Type @@ -107,7 +111,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -119,9 +122,11 @@ CONFIG_XSCALE_PMU=y # # Bus support # +CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -131,7 +136,16 @@ CONFIG_PCI_NAMES=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_ALIGNMENT_TRAP=y # @@ -270,7 +284,6 @@ CONFIG_MTD_IXP2000=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -309,6 +322,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -330,12 +344,12 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -350,6 +364,8 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set # CONFIG_IP_TCPDIAG is not set # CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set @@ -405,6 +421,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -441,9 +458,11 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -465,6 +484,7 @@ CONFIG_EEPRO100=y # Wan interfaces # CONFIG_WAN=y +# CONFIG_DSCC4 is not set # CONFIG_LANMEDIA is not set # CONFIG_SYNCLINK_SYNCPPP is not set CONFIG_HDLC=y @@ -527,7 +547,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -548,6 +567,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -614,17 +634,18 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_IXP2000 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set @@ -638,7 +659,9 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -654,6 +677,7 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -663,14 +687,19 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -724,6 +753,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -764,7 +794,6 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set @@ -802,12 +831,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 72e1b940e975..6dc40f6be0ef 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 21:53:55 2005 +# Linux kernel version: 2.6.13-rc2 +# Thu Jul 7 16:49:08 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -82,6 +84,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -97,6 +100,7 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y CONFIG_ARCH_IXDP2401=y # CONFIG_ARCH_IXDP2801 is not set CONFIG_ARCH_IXDP2X01=y +# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set # # Processor Type @@ -107,7 +111,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -119,9 +122,11 @@ CONFIG_XSCALE_PMU=y # # Bus support # +CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -131,7 +136,16 @@ CONFIG_PCI_NAMES=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_ALIGNMENT_TRAP=y # @@ -270,7 +284,6 @@ CONFIG_MTD_IXP2000=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -309,6 +322,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -330,12 +344,12 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -350,6 +364,8 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set CONFIG_IP_TCPDIAG=y # CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set @@ -405,6 +421,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -442,9 +459,11 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -466,6 +485,7 @@ CONFIG_EEPRO100=y # Wan interfaces # CONFIG_WAN=y +# CONFIG_DSCC4 is not set # CONFIG_LANMEDIA is not set # CONFIG_SYNCLINK_SYNCPPP is not set CONFIG_HDLC=y @@ -528,7 +548,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -549,6 +568,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -615,17 +635,18 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_IXP2000 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set @@ -639,7 +660,9 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -655,6 +678,7 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -664,14 +688,19 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -725,6 +754,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -765,7 +795,6 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set @@ -803,12 +832,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig index 1592e45f0278..d2bb0b7153fe 100644 --- a/arch/arm/configs/ixdp2800_defconfig +++ b/arch/arm/configs/ixdp2800_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 22:15:23 2005 +# Linux kernel version: 2.6.13-rc2 +# Thu Jul 7 16:49:20 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -82,6 +84,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -97,6 +100,7 @@ CONFIG_ARCH_IXDP2800=y CONFIG_ARCH_IXDP2X00=y # CONFIG_ARCH_IXDP2401 is not set # CONFIG_ARCH_IXDP2801 is not set +# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set # # Processor Type @@ -107,7 +111,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -119,9 +122,11 @@ CONFIG_XSCALE_PMU=y # # Bus support # +CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -131,7 +136,16 @@ CONFIG_PCI_NAMES=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_ALIGNMENT_TRAP=y # @@ -270,7 +284,6 @@ CONFIG_MTD_IXP2000=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -309,6 +322,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -330,12 +344,12 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -350,6 +364,8 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set # CONFIG_IP_TCPDIAG is not set # CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set @@ -405,6 +421,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -441,9 +458,11 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -465,6 +484,7 @@ CONFIG_EEPRO100=y # Wan interfaces # CONFIG_WAN=y +# CONFIG_DSCC4 is not set # CONFIG_LANMEDIA is not set # CONFIG_SYNCLINK_SYNCPPP is not set CONFIG_HDLC=y @@ -527,7 +547,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -548,6 +567,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -614,17 +634,18 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_IXP2000 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set @@ -638,7 +659,9 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -654,6 +677,7 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -663,14 +687,19 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -724,6 +753,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -764,7 +794,6 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set @@ -802,12 +831,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index f1afe3d09ec6..2d6f960e3395 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 22:39:19 2005 +# Linux kernel version: 2.6.13-rc2 +# Thu Jul 7 16:49:13 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -82,6 +84,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -97,6 +100,7 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # CONFIG_ARCH_IXDP2401 is not set CONFIG_ARCH_IXDP2801=y CONFIG_ARCH_IXDP2X01=y +# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set # # Processor Type @@ -107,7 +111,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -119,9 +122,11 @@ CONFIG_XSCALE_PMU=y # # Bus support # +CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -131,7 +136,16 @@ CONFIG_PCI_NAMES=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_ALIGNMENT_TRAP=y # @@ -270,7 +284,6 @@ CONFIG_MTD_IXP2000=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -309,6 +322,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -330,12 +344,12 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -350,6 +364,8 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set # CONFIG_IP_TCPDIAG is not set # CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set @@ -405,6 +421,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -442,9 +459,11 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -466,6 +485,7 @@ CONFIG_EEPRO100=y # Wan interfaces # CONFIG_WAN=y +# CONFIG_DSCC4 is not set # CONFIG_LANMEDIA is not set # CONFIG_SYNCLINK_SYNCPPP is not set CONFIG_HDLC=y @@ -528,7 +548,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -549,6 +568,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -615,17 +635,18 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_IXP2000 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set @@ -639,7 +660,9 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -655,6 +678,7 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -664,14 +688,19 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -725,6 +754,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -765,7 +795,6 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set @@ -803,12 +832,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 4e58d9341bce..24955263b096 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 17:52:41 2005 +# Linux kernel version: 2.6.13-rc2 +# Fri Jul 8 04:49:34 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -17,6 +16,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -33,8 +33,9 @@ CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -82,10 +83,28 @@ CONFIG_ARCH_OMAP=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set # # TI OMAP Implementations # +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set # # OMAP Core Type @@ -93,7 +112,6 @@ CONFIG_ARCH_OMAP=y # CONFIG_ARCH_OMAP730 is not set # CONFIG_ARCH_OMAP1510 is not set CONFIG_ARCH_OMAP16XX=y -CONFIG_ARCH_OMAP_OTG=y # # OMAP Board Type @@ -101,21 +119,14 @@ CONFIG_ARCH_OMAP_OTG=y # CONFIG_MACH_OMAP_INNOVATOR is not set CONFIG_MACH_OMAP_H2=y # CONFIG_MACH_OMAP_H3 is not set -# CONFIG_MACH_OMAP_H4 is not set # CONFIG_MACH_OMAP_OSK is not set # CONFIG_MACH_OMAP_GENERIC is not set # -# OMAP Feature Selections +# OMAP CPU Speed # -CONFIG_OMAP_MUX=y -# CONFIG_OMAP_MUX_DEBUG is not set -CONFIG_OMAP_MUX_WARNINGS=y -CONFIG_OMAP_MPU_TIMER=y -# CONFIG_OMAP_32K_TIMER is not set -CONFIG_OMAP_LL_DEBUG_UART1=y -# CONFIG_OMAP_LL_DEBUG_UART2 is not set -# CONFIG_OMAP_LL_DEBUG_UART3 is not set +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_216MHZ is not set CONFIG_OMAP_ARM_192MHZ=y # CONFIG_OMAP_ARM_168MHZ is not set # CONFIG_OMAP_ARM_120MHZ is not set @@ -145,6 +156,7 @@ CONFIG_ARM_THUMB=y # # Bus support # +CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -154,7 +166,16 @@ CONFIG_ARM_THUMB=y # # Kernel Features # +# CONFIG_SMP is not set CONFIG_PREEMPT=y +CONFIG_NO_IDLE_HZ=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -167,6 +188,22 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh" # CONFIG_XIP_KERNEL is not set # +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set + +# # Floating point emulation # @@ -202,7 +239,6 @@ CONFIG_PM=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set -CONFIG_DEBUG_DRIVER=y # # Memory Technology Devices (MTD) @@ -292,7 +328,6 @@ CONFIG_MTD_CFI_UTIL=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -327,6 +362,7 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -356,6 +392,7 @@ CONFIG_SCSI_PROC_FS=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -375,12 +412,12 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -395,6 +432,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_IP_TCPDIAG=y # CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set @@ -442,6 +481,7 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y +# CONFIG_DM9000 is not set # # Ethernet (1000 Mbit) @@ -518,7 +558,6 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -567,13 +606,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # -# CONFIG_TCG_TPM is not set # # I2C support @@ -604,7 +641,9 @@ CONFIG_I2C_CHARDEV=y # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -620,6 +659,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -627,15 +667,21 @@ CONFIG_I2C_CHARDEV=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set CONFIG_ISP1301_OMAP=y +CONFIG_TPS65010=y +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -663,8 +709,10 @@ CONFIG_FB=y # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -677,11 +725,13 @@ CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set # # Logo configuration @@ -729,14 +779,14 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_SA1100 is not set # CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_OMAP=y CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_DUMMY_HCD is not set # CONFIG_USB_GADGET_DUALSPEED is not set # CONFIG_USB_ZERO is not set CONFIG_USB_ETH=y @@ -755,6 +805,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set @@ -791,7 +842,6 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437 # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set @@ -828,12 +878,14 @@ CONFIG_CRAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y @@ -903,24 +955,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_USER is not set # # Security options diff --git a/arch/arm/configs/omnimeter_defconfig b/arch/arm/configs/omnimeter_defconfig deleted file mode 100644 index 78fdb4a428b1..000000000000 --- a/arch/arm/configs/omnimeter_defconfig +++ /dev/null @@ -1,803 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 21:31:45 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -CONFIG_ARCH_SA1100=y -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set - -# -# SA11x0 Implementations -# -# CONFIG_SA1100_ASSABET is not set -# CONFIG_SA1100_CERF is not set -# CONFIG_SA1100_COLLIE is not set -# CONFIG_SA1100_H3100 is not set -# CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set -# CONFIG_SA1100_BADGE4 is not set -# CONFIG_SA1100_JORNADA720 is not set -# CONFIG_SA1100_HACKKIT is not set -# CONFIG_SA1100_LART is not set -# CONFIG_SA1100_PLEB is not set -# CONFIG_SA1100_SHANNON is not set -# CONFIG_SA1100_SIMPAD is not set -# CONFIG_SA1100_SSP is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_SA1100=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_EV4=y -CONFIG_CPU_CACHE_V4WB=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WB=y -CONFIG_CPU_MINICACHE=y - -# -# Processor Features -# - -# -# Bus support -# -CONFIG_ISA=y - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y - -# -# PC-card bridges -# -CONFIG_I82365=y -# CONFIG_TCIC is not set -CONFIG_PCMCIA_SA1100=y -CONFIG_PCCARD_NONSTATIC=y - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -CONFIG_DISCONTIGMEM=y -# CONFIG_LEDS is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="keepinitrd mem=16M root=/dev/ram ramdisk=8192 initrd=0xd0000000,4M" -# CONFIG_XIP_KERNEL is not set - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -# CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECS is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_IDE_CHIPSETS is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_IP_NF_CONNTRACK is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_SMC91X is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -# CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_ARLAN is not set -# CONFIG_WAVELAN is not set -CONFIG_PCMCIA_WAVELAN=y -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_AIRO_CS=y -CONFIG_PCMCIA_WL3501=y -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=y -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=y -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_SA1100=y -CONFIG_SERIAL_SA1100_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_SA1100=y -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -# CONFIG_VFAT_FS is not set -CONFIG_FAT_DEFAULT_CODEPAGE=437 -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 2a63fb277196..96a794d8de84 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 17:47:45 2005 +# Linux kernel version: 2.6.12-git4 +# Wed Jun 22 15:56:42 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -17,6 +16,7 @@ CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -81,6 +83,7 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set # # S3C24XX Implementations @@ -134,6 +137,7 @@ CONFIG_CPU_TLB_V4WBI=y # # Bus support # +CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -143,7 +147,9 @@ CONFIG_CPU_TLB_V4WBI=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set +# CONFIG_DISCONTIGMEM is not set CONFIG_ALIGNMENT_TRAP=y # @@ -297,7 +303,6 @@ CONFIG_PARPORT_1284=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y @@ -359,6 +364,7 @@ CONFIG_BLK_DEV_IDE_BAST=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -378,10 +384,11 @@ CONFIG_NET=y # Networking options # # CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y @@ -443,8 +450,9 @@ CONFIG_NETDEVICES=y # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=m # CONFIG_SMC91X is not set +CONFIG_DM9000=m # # Ethernet (1000 Mbit) @@ -521,7 +529,6 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -563,7 +570,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_S3C2410=y CONFIG_SERIAL_S3C2410_CONSOLE=y -CONFIG_SERIAL_BAST_SIO=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y @@ -605,7 +611,6 @@ CONFIG_S3C2410_RTC=y # # TPM devices # -# CONFIG_TCG_TPM is not set # # I2C support @@ -654,6 +659,7 @@ CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -665,6 +671,7 @@ CONFIG_SENSORS_LM85=m # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -696,8 +703,10 @@ CONFIG_FB=y # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -782,7 +791,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig index 1d9bcbbc8dfc..271823f0d708 100644 --- a/arch/arm/configs/shark_defconfig +++ b/arch/arm/configs/shark_defconfig @@ -1,22 +1,21 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 23:59:14 2005 +# Linux kernel version: 2.6.12-git3 +# Sat Jul 16 15:21:47 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y +CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -33,7 +32,10 @@ CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -81,6 +83,7 @@ CONFIG_ARCH_SHARK=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set # # Processor Type @@ -103,10 +106,12 @@ CONFIG_CPU_TLB_V4WB=y # CONFIG_ISA=y CONFIG_ISA_DMA=y +CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_HOST_VIA82C505=y CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -116,7 +121,9 @@ CONFIG_PCI_LEGACY_PROC=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set +# CONFIG_DISCONTIGMEM is not set CONFIG_LEDS=y CONFIG_LEDS_TIMER=y # CONFIG_LEDS_CPU is not set @@ -163,6 +170,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set # # Memory Technology Devices (MTD) @@ -172,8 +180,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Parallel port support # -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=y +CONFIG_PARPORT=m +CONFIG_PARPORT_PC=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set @@ -189,7 +197,6 @@ CONFIG_PARPORT_PC=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set @@ -229,7 +236,7 @@ CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEFLOPPY=y # CONFIG_BLK_DEV_IDESCSI is not set @@ -261,6 +268,7 @@ CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -290,17 +298,14 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -314,11 +319,8 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=m @@ -327,6 +329,7 @@ CONFIG_SCSI_QLA2XXX=m # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -344,6 +347,8 @@ CONFIG_SCSI_QLA2XXX=m # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support @@ -365,7 +370,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -380,7 +384,7 @@ CONFIG_INET=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set +CONFIG_IP_TCPDIAG=y # CONFIG_IP_TCPDIAG_IPV6 is not set # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set @@ -439,6 +443,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # CONFIG_NET_VENDOR_RACAL is not set # @@ -483,9 +488,11 @@ CONFIG_CS89x0=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -569,7 +576,6 @@ CONFIG_SERIO_I8042=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -592,6 +598,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -653,6 +660,7 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -674,7 +682,7 @@ CONFIG_FB_CYBER2000=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_PM3 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -808,7 +816,7 @@ CONFIG_DNOTIFY=y # # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=y +CONFIG_ISO9660_FS=m CONFIG_JOLIET=y # CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set @@ -816,9 +824,9 @@ CONFIG_JOLIET=y # # DOS/FAT/NT Filesystems # -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set @@ -833,7 +841,6 @@ CONFIG_DEVFS_MOUNT=y # CONFIG_DEVFS_DEBUG is not set # CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -857,13 +864,14 @@ CONFIG_RAMFS=y # # Network File Systems # -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_SUNRPC=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -895,12 +903,12 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -CONFIG_NLS=y +CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_850=m # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set @@ -921,7 +929,7 @@ CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -945,11 +953,22 @@ CONFIG_NLS_ISO8859_1=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_MAGIC_SYSRQ is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set # # Security options diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 4c38bd8bc298..835d450797a1 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -30,9 +30,6 @@ extern void __lshrdi3(void); extern void __modsi3(void); extern void __muldi3(void); extern void __ucmpdi2(void); -extern void __udivdi3(void); -extern void __umoddi3(void); -extern void __udivmoddi4(void); extern void __udivsi3(void); extern void __umodsi3(void); extern void __do_div64(void); @@ -44,7 +41,10 @@ extern void fp_enter(void); * This has a special calling convention; it doesn't * modify any of the usual registers, except for LR. */ +#define EXPORT_CRC_ALIAS(sym) __CRC_SYMBOL(sym, "") + #define EXPORT_SYMBOL_ALIAS(sym,orig) \ + EXPORT_CRC_ALIAS(sym) \ const struct kernel_symbol __ksymtab_##sym \ __attribute__((section("__ksymtab"))) = \ { (unsigned long)&orig, #sym }; @@ -134,9 +134,6 @@ EXPORT_SYMBOL(__lshrdi3); EXPORT_SYMBOL(__modsi3); EXPORT_SYMBOL(__muldi3); EXPORT_SYMBOL(__ucmpdi2); -EXPORT_SYMBOL(__udivdi3); -EXPORT_SYMBOL(__umoddi3); -EXPORT_SYMBOL(__udivmoddi4); EXPORT_SYMBOL(__udivsi3); EXPORT_SYMBOL(__umodsi3); EXPORT_SYMBOL(__do_div64); diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index ad26e98f1e62..c4923fac8dff 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -447,9 +447,26 @@ pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, region->end = res->end - offset; } +void __devinit +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + struct pci_sys_data *root = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = root->io_offset; + if (res->flags & IORESOURCE_MEM) + offset = root->mem_offset; + + res->start = region->start + offset; + res->end = region->end + offset; +} + #ifdef CONFIG_HOTPLUG EXPORT_SYMBOL(pcibios_fixup_bus); EXPORT_SYMBOL(pcibios_resource_to_bus); +EXPORT_SYMBOL(pcibios_bus_to_resource); #endif /* diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index bd4823c74645..1155cf07c871 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -344,9 +344,9 @@ __create_page_tables: str r6, [r0] #endif +#ifdef CONFIG_DEBUG_LL bic r7, r7, #0x0c @ turn off cacheable @ and bufferable bits -#ifdef CONFIG_DEBUG_LL /* * Map in IO space for serial debugging. * This allows debug messages to be output @@ -372,28 +372,24 @@ __create_page_tables: teq r1, #MACH_TYPE_NETWINDER teqne r1, #MACH_TYPE_CATS bne 1f - add r0, r4, #0x3fc0 @ ff000000 - mov r3, #0x7c000000 - orr r3, r3, r7 - str r3, [r0], #4 - add r3, r3, #1 << 20 - str r3, [r0], #4 + add r0, r4, #0xff000000 >> 18 + orr r3, r7, #0x7c000000 + str r3, [r0] 1: #endif -#endif #ifdef CONFIG_ARCH_RPC /* * Map in screen at 0x02000000 & SCREEN2_BASE * Similar reasons here - for debug. This is * only for Acorn RiscPC architectures. */ - add r0, r4, #0x80 @ 02000000 - mov r3, #0x02000000 - orr r3, r3, r7 + add r0, r4, #0x02000000 >> 18 + orr r3, r7, #0x02000000 str r3, [r0] - add r0, r4, #0x3600 @ d8000000 + add r0, r4, #0xd8000000 >> 18 str r3, [r0] #endif +#endif mov pc, lr .ltorg diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index ff187f4308f0..395137a8fad2 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -4,6 +4,10 @@ * Copyright (C) 1992 Linus Torvalds * Modifications for ARM processor Copyright (C) 1995-2000 Russell King. * + * Support for Dynamic Tick Timer Copyright (C) 2004-2005 Nokia Corporation. + * Dynamic Tick Timer written by Tony Lindgren <tony@atomide.com> and + * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>. + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -37,6 +41,7 @@ #include <asm/irq.h> #include <asm/system.h> #include <asm/mach/irq.h> +#include <asm/mach/time.h> /* * Maximum IRQ count. Currently, this is arbitary. However, it should @@ -329,6 +334,15 @@ __do_irq(unsigned int irq, struct irqaction *action, struct pt_regs *regs) spin_unlock(&irq_controller_lock); +#ifdef CONFIG_NO_IDLE_HZ + if (!(action->flags & SA_TIMER) && system_timer->dyn_tick != NULL) { + write_seqlock(&xtime_lock); + if (system_timer->dyn_tick->state & DYN_TICK_ENABLED) + system_timer->dyn_tick->handler(irq, 0, regs); + write_sequnlock(&xtime_lock); + } +#endif + if (!(action->flags & SA_INTERRUPT)) local_irq_enable(); diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 8f146a4b4752..409db6d5ec99 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -32,6 +32,7 @@ #include <asm/leds.h> #include <asm/processor.h> #include <asm/uaccess.h> +#include <asm/mach/time.h> extern const char *processor_modes[]; extern void setup_mm_for_reboot(char mode); @@ -85,8 +86,10 @@ EXPORT_SYMBOL(pm_power_off); void default_idle(void) { local_irq_disable(); - if (!need_resched() && !hlt_counter) + if (!need_resched() && !hlt_counter) { + timer_dyn_reprogram(); arch_idle(); + } local_irq_enable(); } @@ -128,7 +131,6 @@ void machine_halt(void) { } -EXPORT_SYMBOL(machine_halt); void machine_power_off(void) { @@ -136,7 +138,6 @@ void machine_power_off(void) pm_power_off(); } -EXPORT_SYMBOL(machine_power_off); void machine_restart(char * __unused) { @@ -166,8 +167,6 @@ void machine_restart(char * __unused) while (1); } -EXPORT_SYMBOL(machine_restart); - void __show_regs(struct pt_regs *regs) { unsigned long flags = condition_codes(regs); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 9fed5fa194d9..c9b69771f92e 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -359,7 +359,8 @@ void cpu_init(void) "I" (offsetof(struct stack, abt[0])), "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE), "I" (offsetof(struct stack, und[0])), - "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)); + "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE) + : "r14"); } static struct machine_desc * __init setup_machine(unsigned int nr) @@ -395,6 +396,20 @@ static void __init early_initrd(char **p) } __early_param("initrd=", early_initrd); +static void __init add_memory(unsigned long start, unsigned long size) +{ + /* + * Ensure that start/size are aligned to a page boundary. + * Size is appropriately rounded down, start is rounded up. + */ + size -= start & ~PAGE_MASK; + + meminfo.bank[meminfo.nr_banks].start = PAGE_ALIGN(start); + meminfo.bank[meminfo.nr_banks].size = size & PAGE_MASK; + meminfo.bank[meminfo.nr_banks].node = PHYS_TO_NID(start); + meminfo.nr_banks += 1; +} + /* * Pick out the memory size. We look for mem=size@start, * where start and size are "size[KkMm]" @@ -419,10 +434,7 @@ static void __init early_mem(char **p) if (**p == '@') start = memparse(*p + 1, p); - meminfo.bank[meminfo.nr_banks].start = start; - meminfo.bank[meminfo.nr_banks].size = size; - meminfo.bank[meminfo.nr_banks].node = PHYS_TO_NID(start); - meminfo.nr_banks += 1; + add_memory(start, size); } __early_param("mem=", early_mem); @@ -564,11 +576,7 @@ static int __init parse_tag_mem32(const struct tag *tag) tag->u.mem.start, tag->u.mem.size / 1024); return -EINVAL; } - meminfo.bank[meminfo.nr_banks].start = tag->u.mem.start; - meminfo.bank[meminfo.nr_banks].size = tag->u.mem.size; - meminfo.bank[meminfo.nr_banks].node = PHYS_TO_NID(tag->u.mem.start); - meminfo.nr_banks += 1; - + add_memory(tag->u.mem.start, tag->u.mem.size); return 0; } @@ -729,8 +737,8 @@ void __init setup_arch(char **cmdline_p) if (mdesc->soft_reboot) reboot_setup("s"); - if (mdesc->param_offset) - tags = phys_to_virt(mdesc->param_offset); + if (mdesc->boot_params) + tags = phys_to_virt(mdesc->boot_params); /* * If we have the old style parameters, convert them to diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 931919fd5121..5e435e42dacd 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -19,6 +19,7 @@ #include <asm/unistd.h> #include "ptrace.h" +#include "signal.h" #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) @@ -35,7 +36,7 @@ #define SWI_THUMB_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE)) #define SWI_THUMB_RT_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE)) -static const unsigned long retcodes[4] = { +const unsigned long sigreturn_codes[4] = { SWI_SYS_SIGRETURN, SWI_THUMB_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN }; @@ -500,17 +501,25 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka, if (ka->sa.sa_flags & SA_SIGINFO) idx += 2; - if (__put_user(retcodes[idx], rc)) + if (__put_user(sigreturn_codes[idx], rc)) return 1; - /* - * Ensure that the instruction cache sees - * the return code written onto the stack. - */ - flush_icache_range((unsigned long)rc, - (unsigned long)(rc + 1)); - - retcode = ((unsigned long)rc) + thumb; + if (cpsr & MODE32_BIT) { + /* + * 32-bit code can use the new high-page + * signal return code support. + */ + retcode = KERN_SIGRETURN_CODE + (idx << 2) + thumb; + } else { + /* + * Ensure that the instruction cache sees + * the return code written onto the stack. + */ + flush_icache_range((unsigned long)rc, + (unsigned long)(rc + 1)); + + retcode = ((unsigned long)rc) + thumb; + } } regs->ARM_r0 = usig; @@ -688,7 +697,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall) if (!user_mode(regs)) return 0; - if (try_to_freeze(0)) + if (try_to_freeze()) goto no_signal; if (current->ptrace & PT_SINGLESTEP) diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h new file mode 100644 index 000000000000..91d26faca62b --- /dev/null +++ b/arch/arm/kernel/signal.h @@ -0,0 +1,12 @@ +/* + * linux/arch/arm/kernel/signal.h + * + * Copyright (C) 2005 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#define KERN_SIGRETURN_CODE 0xffff0500 + +extern const unsigned long sigreturn_codes[4]; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 34892758f098..b2085735a2ba 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -36,7 +36,7 @@ * The present bitmask indicates that the CPU is physically present. * The online bitmask indicates that the CPU is up and running. */ -cpumask_t cpu_present_mask; +cpumask_t cpu_possible_map; cpumask_t cpu_online_map; /* @@ -78,7 +78,7 @@ struct smp_call_struct { static struct smp_call_struct * volatile smp_call_function_data; static DEFINE_SPINLOCK(smp_call_function_lock); -int __init __cpu_up(unsigned int cpu) +int __cpuinit __cpu_up(unsigned int cpu) { struct task_struct *idle; pgd_t *pgd; @@ -159,7 +159,7 @@ int __init __cpu_up(unsigned int cpu) * This is the secondary CPU boot entry. We're using this CPUs * idle thread stack, but a set of temporary page tables. */ -asmlinkage void __init secondary_start_kernel(void) +asmlinkage void __cpuinit secondary_start_kernel(void) { struct mm_struct *mm = &init_mm; unsigned int cpu = smp_processor_id(); @@ -176,6 +176,7 @@ asmlinkage void __init secondary_start_kernel(void) cpu_set(cpu, mm->cpu_vm_mask); cpu_switch_mm(mm->pgd, mm); enter_lazy_tlb(mm, current); + local_flush_tlb_all(); cpu_init(); @@ -209,7 +210,7 @@ asmlinkage void __init secondary_start_kernel(void) * Called by both boot and secondaries to move global data into * per-processor storage. */ -void __init smp_store_cpu_info(unsigned int cpuid) +void __cpuinit smp_store_cpu_info(unsigned int cpuid) { struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid); @@ -235,7 +236,8 @@ void __init smp_prepare_boot_cpu(void) { unsigned int cpu = smp_processor_id(); - cpu_set(cpu, cpu_present_mask); + cpu_set(cpu, cpu_possible_map); + cpu_set(cpu, cpu_present_map); cpu_set(cpu, cpu_online_map); } @@ -355,7 +357,7 @@ void show_ipi_list(struct seq_file *p) seq_puts(p, "IPI:"); - for_each_online_cpu(cpu) + for_each_present_cpu(cpu) seq_printf(p, " %10lu", per_cpu(ipi_data, cpu).ipi_count); seq_putc(p, '\n'); @@ -502,3 +504,126 @@ int __init setup_profiling_timer(unsigned int multiplier) { return -EINVAL; } + +static int +on_each_cpu_mask(void (*func)(void *), void *info, int retry, int wait, + cpumask_t mask) +{ + int ret = 0; + + preempt_disable(); + + ret = smp_call_function_on_cpu(func, info, retry, wait, mask); + if (cpu_isset(smp_processor_id(), mask)) + func(info); + + preempt_enable(); + + return ret; +} + +/**********************************************************************/ + +/* + * TLB operations + */ +struct tlb_args { + struct vm_area_struct *ta_vma; + unsigned long ta_start; + unsigned long ta_end; +}; + +static inline void ipi_flush_tlb_all(void *ignored) +{ + local_flush_tlb_all(); +} + +static inline void ipi_flush_tlb_mm(void *arg) +{ + struct mm_struct *mm = (struct mm_struct *)arg; + + local_flush_tlb_mm(mm); +} + +static inline void ipi_flush_tlb_page(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_page(ta->ta_vma, ta->ta_start); +} + +static inline void ipi_flush_tlb_kernel_page(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_kernel_page(ta->ta_start); +} + +static inline void ipi_flush_tlb_range(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end); +} + +static inline void ipi_flush_tlb_kernel_range(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end); +} + +void flush_tlb_all(void) +{ + on_each_cpu(ipi_flush_tlb_all, NULL, 1, 1); +} + +void flush_tlb_mm(struct mm_struct *mm) +{ + cpumask_t mask = mm->cpu_vm_mask; + + on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, 1, mask); +} + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) +{ + cpumask_t mask = vma->vm_mm->cpu_vm_mask; + struct tlb_args ta; + + ta.ta_vma = vma; + ta.ta_start = uaddr; + + on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, 1, mask); +} + +void flush_tlb_kernel_page(unsigned long kaddr) +{ + struct tlb_args ta; + + ta.ta_start = kaddr; + + on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1, 1); +} + +void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + cpumask_t mask = vma->vm_mm->cpu_vm_mask; + struct tlb_args ta; + + ta.ta_vma = vma; + ta.ta_start = start; + ta.ta_end = end; + + on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, 1, mask); +} + +void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + struct tlb_args ta; + + ta.ta_start = start; + ta.ta_end = end; + + on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1, 1); +} diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index c232f24f4a60..1b7fcd50c3e2 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -381,6 +381,99 @@ static struct sysdev_class timer_sysclass = { .resume = timer_resume, }; +#ifdef CONFIG_NO_IDLE_HZ +static int timer_dyn_tick_enable(void) +{ + struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; + unsigned long flags; + int ret = -ENODEV; + + if (dyn_tick) { + write_seqlock_irqsave(&xtime_lock, flags); + ret = 0; + if (!(dyn_tick->state & DYN_TICK_ENABLED)) { + ret = dyn_tick->enable(); + + if (ret == 0) + dyn_tick->state |= DYN_TICK_ENABLED; + } + write_sequnlock_irqrestore(&xtime_lock, flags); + } + + return ret; +} + +static int timer_dyn_tick_disable(void) +{ + struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; + unsigned long flags; + int ret = -ENODEV; + + if (dyn_tick) { + write_seqlock_irqsave(&xtime_lock, flags); + ret = 0; + if (dyn_tick->state & DYN_TICK_ENABLED) { + ret = dyn_tick->disable(); + + if (ret == 0) + dyn_tick->state &= ~DYN_TICK_ENABLED; + } + write_sequnlock_irqrestore(&xtime_lock, flags); + } + + return ret; +} + +/* + * Reprogram the system timer for at least the calculated time interval. + * This function should be called from the idle thread with IRQs disabled, + * immediately before sleeping. + */ +void timer_dyn_reprogram(void) +{ + struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; + + write_seqlock(&xtime_lock); + if (dyn_tick->state & DYN_TICK_ENABLED) + dyn_tick->reprogram(next_timer_interrupt() - jiffies); + write_sequnlock(&xtime_lock); +} + +static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf) +{ + return sprintf(buf, "%i\n", + (system_timer->dyn_tick->state & DYN_TICK_ENABLED) >> 1); +} + +static ssize_t timer_set_dyn_tick(struct sys_device *dev, const char *buf, + size_t count) +{ + unsigned int enable = simple_strtoul(buf, NULL, 2); + + if (enable) + timer_dyn_tick_enable(); + else + timer_dyn_tick_disable(); + + return count; +} +static SYSDEV_ATTR(dyn_tick, 0644, timer_show_dyn_tick, timer_set_dyn_tick); + +/* + * dyntick=enable|disable + */ +static char dyntick_str[4] __initdata = ""; + +static int __init dyntick_setup(char *str) +{ + if (str) + strlcpy(dyntick_str, str, sizeof(dyntick_str)); + return 1; +} + +__setup("dyntick=", dyntick_setup); +#endif + static int __init timer_init_sysfs(void) { int ret = sysdev_class_register(&timer_sysclass); @@ -388,6 +481,20 @@ static int __init timer_init_sysfs(void) system_timer->dev.cls = &timer_sysclass; ret = sysdev_register(&system_timer->dev); } + +#ifdef CONFIG_NO_IDLE_HZ + if (ret == 0 && system_timer->dyn_tick) { + ret = sysdev_create_file(&system_timer->dev, &attr_dyn_tick); + + /* + * Turn on dynamic tick after calibrate delay + * for correct bogomips + */ + if (ret == 0 && dyntick_str[0] == 'e') + ret = timer_dyn_tick_enable(); + } +#endif + return ret; } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 45d2a032d890..d571c37ac30c 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -30,6 +30,7 @@ #include <asm/traps.h> #include "ptrace.h" +#include "signal.h" const char *processor_modes[]= { "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" , @@ -229,16 +230,8 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err) do_exit(SIGSEGV); } -void die_if_kernel(const char *str, struct pt_regs *regs, int err) -{ - if (user_mode(regs)) - return; - - die(str, regs, err); -} - -static void notify_die(const char *str, struct pt_regs *regs, siginfo_t *info, - unsigned long err, unsigned long trap) +void notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, + unsigned long err, unsigned long trap) { if (user_mode(regs)) { current->thread.error_code = err; @@ -255,16 +248,20 @@ static DEFINE_SPINLOCK(undef_lock); void register_undef_hook(struct undef_hook *hook) { - spin_lock_irq(&undef_lock); + unsigned long flags; + + spin_lock_irqsave(&undef_lock, flags); list_add(&hook->node, &undef_hook); - spin_unlock_irq(&undef_lock); + spin_unlock_irqrestore(&undef_lock, flags); } void unregister_undef_hook(struct undef_hook *hook) { - spin_lock_irq(&undef_lock); + unsigned long flags; + + spin_lock_irqsave(&undef_lock, flags); list_del(&hook->node); - spin_unlock_irq(&undef_lock); + spin_unlock_irqrestore(&undef_lock, flags); } asmlinkage void do_undefinstr(struct pt_regs *regs) @@ -683,6 +680,14 @@ void __init trap_init(void) memcpy((void *)0xffff0000, __vectors_start, __vectors_end - __vectors_start); memcpy((void *)0xffff0200, __stubs_start, __stubs_end - __stubs_start); memcpy((void *)0xffff1000 - kuser_sz, __kuser_helper_start, kuser_sz); + + /* + * Copy signal return handlers into the vector page, and + * set sigreturn to be a pointer to these. + */ + memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes, + sizeof(sigreturn_codes)); + flush_icache_range(0xffff0000, 0xffff0000 + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); } diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index c0e65833ffc4..8725d63e4219 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -11,7 +11,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ strnlen_user.o strchr.o strrchr.o testchangebit.o \ testclearbit.o testsetbit.o uaccess.o getuser.o \ putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ - ucmpdi2.o udivdi3.o lib1funcs.o div64.o \ + ucmpdi2.o lib1funcs.o div64.o \ io-readsb.o io-writesb.o io-readsl.o io-writesl.o ifeq ($(CONFIG_CPU_32v3),y) diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 4a83ab6cd565..2036ff15bda9 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -1,3 +1,33 @@ +#if __LINUX_ARM_ARCH__ >= 6 + .macro bitop, instr + mov r2, #1 + and r3, r0, #7 @ Get bit offset + add r1, r1, r0, lsr #3 @ Get byte offset + mov r3, r2, lsl r3 +1: ldrexb r2, [r1] + \instr r2, r2, r3 + strexb r0, r2, [r1] + cmp r0, #0 + bne 1b + mov pc, lr + .endm + + .macro testop, instr, store + and r3, r0, #7 @ Get bit offset + mov r2, #1 + add r1, r1, r0, lsr #3 @ Get byte offset + mov r3, r2, lsl r3 @ create mask +1: ldrexb r2, [r1] + ands r0, r2, r3 @ save old value of bit + \instr r2, r2, r3 @ toggle bit + strexb ip, r2, [r1] + cmp ip, #0 + bne 1b + cmp r0, #0 + movne r0, #1 +2: mov pc, lr + .endm +#else .macro bitop, instr and r2, r0, #7 mov r3, #1 @@ -31,3 +61,4 @@ moveq r0, #0 mov pc, lr .endm +#endif diff --git a/arch/arm/lib/io-shark.c b/arch/arm/lib/io-shark.c index 108d4573e970..824253948f51 100644 --- a/arch/arm/lib/io-shark.c +++ b/arch/arm/lib/io-shark.c @@ -11,73 +11,3 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/kernel.h> - -#include <asm/io.h> - -void print_warning(void) -{ - printk(KERN_WARNING "ins?/outs? not implemented on this architecture\n"); -} - -void insl(unsigned int port, void *to, int len) -{ - print_warning(); -} - -void insb(unsigned int port, void *to, int len) -{ - print_warning(); -} - -void outsl(unsigned int port, const void *from, int len) -{ - print_warning(); -} - -void outsb(unsigned int port, const void *from, int len) -{ - print_warning(); -} - -/* these should be in assembler again */ - -/* - * Purpose: read a block of data from a hardware register to memory. - * Proto : insw(int from_port, void *to, int len_in_words); - * Proto : inswb(int from_port, void *to, int len_in_bytes); - * Notes : increment to - */ - -void insw(unsigned int port, void *to, int len) -{ - int i; - - for (i = 0; i < len; i++) - ((unsigned short *) to)[i] = inw(port); -} - -void inswb(unsigned int port, void *to, int len) -{ - insw(port, to, len >> 2); -} - -/* - * Purpose: write a block of data from memory to a hardware register. - * Proto : outsw(int to_reg, void *from, int len_in_words); - * Proto : outswb(int to_reg, void *from, int len_in_bytes); - * Notes : increments from - */ - -void outsw(unsigned int port, const void *from, int len) -{ - int i; - - for (i = 0; i < len; i++) - outw(((unsigned short *) from)[i], port); -} - -void outswb(unsigned int port, const void *from, int len) -{ - outsw(port, from, len >> 2); -} diff --git a/arch/arm/lib/longlong.h b/arch/arm/lib/longlong.h deleted file mode 100644 index 90ae647e4d76..000000000000 --- a/arch/arm/lib/longlong.h +++ /dev/null @@ -1,183 +0,0 @@ -/* longlong.h -- based on code from gcc-2.95.3 - - definitions for mixed size 32/64 bit arithmetic. - Copyright (C) 1991, 92, 94, 95, 96, 1997, 1998 Free Software Foundation, Inc. - - This definition file is free software; you can redistribute it - and/or modify it under the terms of the GNU General Public - License as published by the Free Software Foundation; either - version 2, or (at your option) any later version. - - This definition file is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. */ - -/* Borrowed from GCC 2.95.3, I Molton 29/07/01 */ - -#ifndef SI_TYPE_SIZE -#define SI_TYPE_SIZE 32 -#endif - -#define __BITS4 (SI_TYPE_SIZE / 4) -#define __ll_B (1L << (SI_TYPE_SIZE / 2)) -#define __ll_lowpart(t) ((u32) (t) % __ll_B) -#define __ll_highpart(t) ((u32) (t) / __ll_B) - -/* Define auxiliary asm macros. - - 1) umul_ppmm(high_prod, low_prod, multipler, multiplicand) - multiplies two u32 integers MULTIPLER and MULTIPLICAND, - and generates a two-part u32 product in HIGH_PROD and - LOW_PROD. - - 2) __umulsidi3(a,b) multiplies two u32 integers A and B, - and returns a u64 product. This is just a variant of umul_ppmm. - - 3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator, - denominator) divides a two-word unsigned integer, composed by the - integers HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and - places the quotient in QUOTIENT and the remainder in REMAINDER. - HIGH_NUMERATOR must be less than DENOMINATOR for correct operation. - If, in addition, the most significant bit of DENOMINATOR must be 1, - then the pre-processor symbol UDIV_NEEDS_NORMALIZATION is defined to 1. - - 4) sdiv_qrnnd(quotient, remainder, high_numerator, low_numerator, - denominator). Like udiv_qrnnd but the numbers are signed. The - quotient is rounded towards 0. - - 5) count_leading_zeros(count, x) counts the number of zero-bits from - the msb to the first non-zero bit. This is the number of steps X - needs to be shifted left to set the msb. Undefined for X == 0. - - 6) add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1, - high_addend_2, low_addend_2) adds two two-word unsigned integers, - composed by HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and - LOW_ADDEND_2 respectively. The result is placed in HIGH_SUM and - LOW_SUM. Overflow (i.e. carry out) is not stored anywhere, and is - lost. - - 7) sub_ddmmss(high_difference, low_difference, high_minuend, - low_minuend, high_subtrahend, low_subtrahend) subtracts two - two-word unsigned integers, composed by HIGH_MINUEND_1 and - LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and LOW_SUBTRAHEND_2 - respectively. The result is placed in HIGH_DIFFERENCE and - LOW_DIFFERENCE. Overflow (i.e. carry out) is not stored anywhere, - and is lost. - - If any of these macros are left undefined for a particular CPU, - C macros are used. */ - -#if defined (__arm__) -#define add_ssaaaa(sh, sl, ah, al, bh, bl) \ - __asm__ ("adds %1, %4, %5 \n\ - adc %0, %2, %3" \ - : "=r" ((u32) (sh)), \ - "=&r" ((u32) (sl)) \ - : "%r" ((u32) (ah)), \ - "rI" ((u32) (bh)), \ - "%r" ((u32) (al)), \ - "rI" ((u32) (bl))) -#define sub_ddmmss(sh, sl, ah, al, bh, bl) \ - __asm__ ("subs %1, %4, %5 \n\ - sbc %0, %2, %3" \ - : "=r" ((u32) (sh)), \ - "=&r" ((u32) (sl)) \ - : "r" ((u32) (ah)), \ - "rI" ((u32) (bh)), \ - "r" ((u32) (al)), \ - "rI" ((u32) (bl))) -#define umul_ppmm(xh, xl, a, b) \ -{register u32 __t0, __t1, __t2; \ - __asm__ ("%@ Inlined umul_ppmm \n\ - mov %2, %5, lsr #16 \n\ - mov %0, %6, lsr #16 \n\ - bic %3, %5, %2, lsl #16 \n\ - bic %4, %6, %0, lsl #16 \n\ - mul %1, %3, %4 \n\ - mul %4, %2, %4 \n\ - mul %3, %0, %3 \n\ - mul %0, %2, %0 \n\ - adds %3, %4, %3 \n\ - addcs %0, %0, #65536 \n\ - adds %1, %1, %3, lsl #16 \n\ - adc %0, %0, %3, lsr #16" \ - : "=&r" ((u32) (xh)), \ - "=r" ((u32) (xl)), \ - "=&r" (__t0), "=&r" (__t1), "=r" (__t2) \ - : "r" ((u32) (a)), \ - "r" ((u32) (b)));} -#define UMUL_TIME 20 -#define UDIV_TIME 100 -#endif /* __arm__ */ - -#define __umulsidi3(u, v) \ - ({DIunion __w; \ - umul_ppmm (__w.s.high, __w.s.low, u, v); \ - __w.ll; }) - -#define __udiv_qrnnd_c(q, r, n1, n0, d) \ - do { \ - u32 __d1, __d0, __q1, __q0; \ - u32 __r1, __r0, __m; \ - __d1 = __ll_highpart (d); \ - __d0 = __ll_lowpart (d); \ - \ - __r1 = (n1) % __d1; \ - __q1 = (n1) / __d1; \ - __m = (u32) __q1 * __d0; \ - __r1 = __r1 * __ll_B | __ll_highpart (n0); \ - if (__r1 < __m) \ - { \ - __q1--, __r1 += (d); \ - if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\ - if (__r1 < __m) \ - __q1--, __r1 += (d); \ - } \ - __r1 -= __m; \ - \ - __r0 = __r1 % __d1; \ - __q0 = __r1 / __d1; \ - __m = (u32) __q0 * __d0; \ - __r0 = __r0 * __ll_B | __ll_lowpart (n0); \ - if (__r0 < __m) \ - { \ - __q0--, __r0 += (d); \ - if (__r0 >= (d)) \ - if (__r0 < __m) \ - __q0--, __r0 += (d); \ - } \ - __r0 -= __m; \ - \ - (q) = (u32) __q1 * __ll_B | __q0; \ - (r) = __r0; \ - } while (0) - -#define UDIV_NEEDS_NORMALIZATION 1 -#define udiv_qrnnd __udiv_qrnnd_c - -#define count_leading_zeros(count, x) \ - do { \ - u32 __xr = (x); \ - u32 __a; \ - \ - if (SI_TYPE_SIZE <= 32) \ - { \ - __a = __xr < ((u32)1<<2*__BITS4) \ - ? (__xr < ((u32)1<<__BITS4) ? 0 : __BITS4) \ - : (__xr < ((u32)1<<3*__BITS4) ? 2*__BITS4 : 3*__BITS4); \ - } \ - else \ - { \ - for (__a = SI_TYPE_SIZE - 8; __a > 0; __a -= 8) \ - if (((__xr >> __a) & 0xff) != 0) \ - break; \ - } \ - \ - (count) = SI_TYPE_SIZE - (__clz_tab[__xr >> __a] + __a); \ - } while (0) diff --git a/arch/arm/lib/udivdi3.c b/arch/arm/lib/udivdi3.c deleted file mode 100644 index e343be4c6642..000000000000 --- a/arch/arm/lib/udivdi3.c +++ /dev/null @@ -1,222 +0,0 @@ -/* More subroutines needed by GCC output code on some machines. */ -/* Compile this one with gcc. */ -/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc. - -This file is part of GNU CC. - -GNU CC is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2, or (at your option) -any later version. - -GNU CC is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU CC; see the file COPYING. If not, write to -the Free Software Foundation, 59 Temple Place - Suite 330, -Boston, MA 02111-1307, USA. */ - -/* As a special exception, if you link this library with other files, - some of which are compiled with GCC, to produce an executable, - this library does not by itself cause the resulting executable - to be covered by the GNU General Public License. - This exception does not however invalidate any other reasons why - the executable file might be covered by the GNU General Public License. - */ -/* support functions required by the kernel. based on code from gcc-2.95.3 */ -/* I Molton 29/07/01 */ - -#include "gcclib.h" -#include "longlong.h" - -static const u8 __clz_tab[] = { - 0, 1, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5, - 5, 5, 5, 5, 5, 5, 5, 5, - 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, - 6, 6, 6, 6, 6, 6, 6, 6, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, - 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, -}; - -u64 __udivmoddi4(u64 n, u64 d, u64 * rp) -{ - DIunion ww; - DIunion nn, dd; - DIunion rr; - u32 d0, d1, n0, n1, n2; - u32 q0, q1; - u32 b, bm; - - nn.ll = n; - dd.ll = d; - - d0 = dd.s.low; - d1 = dd.s.high; - n0 = nn.s.low; - n1 = nn.s.high; - - if (d1 == 0) { - if (d0 > n1) { - /* 0q = nn / 0D */ - - count_leading_zeros(bm, d0); - - if (bm != 0) { - /* Normalize, i.e. make the most significant bit of the - denominator set. */ - - d0 = d0 << bm; - n1 = (n1 << bm) | (n0 >> (SI_TYPE_SIZE - bm)); - n0 = n0 << bm; - } - - udiv_qrnnd(q0, n0, n1, n0, d0); - q1 = 0; - - /* Remainder in n0 >> bm. */ - } else { - /* qq = NN / 0d */ - - if (d0 == 0) - d0 = 1 / d0; /* Divide intentionally by zero. */ - - count_leading_zeros(bm, d0); - - if (bm == 0) { - /* From (n1 >= d0) /\ (the most significant bit of d0 is set), - conclude (the most significant bit of n1 is set) /\ (the - leading quotient digit q1 = 1). - - This special case is necessary, not an optimization. - (Shifts counts of SI_TYPE_SIZE are undefined.) */ - - n1 -= d0; - q1 = 1; - } else { - /* Normalize. */ - - b = SI_TYPE_SIZE - bm; - - d0 = d0 << bm; - n2 = n1 >> b; - n1 = (n1 << bm) | (n0 >> b); - n0 = n0 << bm; - - udiv_qrnnd(q1, n1, n2, n1, d0); - } - - /* n1 != d0... */ - - udiv_qrnnd(q0, n0, n1, n0, d0); - - /* Remainder in n0 >> bm. */ - } - - if (rp != 0) { - rr.s.low = n0 >> bm; - rr.s.high = 0; - *rp = rr.ll; - } - } else { - if (d1 > n1) { - /* 00 = nn / DD */ - - q0 = 0; - q1 = 0; - - /* Remainder in n1n0. */ - if (rp != 0) { - rr.s.low = n0; - rr.s.high = n1; - *rp = rr.ll; - } - } else { - /* 0q = NN / dd */ - - count_leading_zeros(bm, d1); - if (bm == 0) { - /* From (n1 >= d1) /\ (the most significant bit of d1 is set), - conclude (the most significant bit of n1 is set) /\ (the - quotient digit q0 = 0 or 1). - - This special case is necessary, not an optimization. */ - - /* The condition on the next line takes advantage of that - n1 >= d1 (true due to program flow). */ - if (n1 > d1 || n0 >= d0) { - q0 = 1; - sub_ddmmss(n1, n0, n1, n0, d1, d0); - } else - q0 = 0; - - q1 = 0; - - if (rp != 0) { - rr.s.low = n0; - rr.s.high = n1; - *rp = rr.ll; - } - } else { - u32 m1, m0; - /* Normalize. */ - - b = SI_TYPE_SIZE - bm; - - d1 = (d1 << bm) | (d0 >> b); - d0 = d0 << bm; - n2 = n1 >> b; - n1 = (n1 << bm) | (n0 >> b); - n0 = n0 << bm; - - udiv_qrnnd(q0, n1, n2, n1, d1); - umul_ppmm(m1, m0, q0, d0); - - if (m1 > n1 || (m1 == n1 && m0 > n0)) { - q0--; - sub_ddmmss(m1, m0, m1, m0, d1, d0); - } - - q1 = 0; - - /* Remainder in (n1n0 - m1m0) >> bm. */ - if (rp != 0) { - sub_ddmmss(n1, n0, n1, n0, m1, m0); - rr.s.low = (n1 << b) | (n0 >> bm); - rr.s.high = n1 >> bm; - *rp = rr.ll; - } - } - } - } - - ww.s.low = q0; - ww.s.high = q1; - return ww.ll; -} - -u64 __udivdi3(u64 n, u64 d) -{ - return __udivmoddi4(n, d, (u64 *) 0); -} - -u64 __umoddi3(u64 u, u64 v) -{ - u64 w; - - (void)__udivmoddi4(u, v, &w); - - return w; -} diff --git a/arch/arm/mach-aaec2000/Makefile.boot b/arch/arm/mach-aaec2000/Makefile.boot new file mode 100644 index 000000000000..8f5a8b7c53c7 --- /dev/null +++ b/arch/arm/mach-aaec2000/Makefile.boot @@ -0,0 +1 @@ + zreladdr-y := 0xf0008000 diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c index 5417ca3f4621..c9d899886648 100644 --- a/arch/arm/mach-aaec2000/aaed2000.c +++ b/arch/arm/mach-aaec2000/aaed2000.c @@ -40,9 +40,11 @@ static void __init aaed2000_map_io(void) } MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform") - MAINTAINER("Nicolas Bellido Y Ortega") - BOOT_MEM(0xf0000000, PIO_BASE, VIO_BASE) - MAPIO(aaed2000_map_io) - INITIRQ(aaed2000_init_irq) + /* Maintainer: Nicolas Bellido Y Ortega */ + .phys_ram = 0xf0000000, + .phys_io = PIO_BASE, + .io_pg_offst = ((VIO_BASE) >> 18) & 0xfffc, + .map_io = aaed2000_map_io, + .init_irq = aaed2000_init_irq, .timer = &aaec2000_timer, MACHINE_END diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index fc145b3768fa..aece0cd4f0a3 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -128,8 +128,8 @@ aaec2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction aaec2000_timer_irq = { .name = "AAEC-2000 Timer Tick", - .flags = SA_INTERRUPT, - .handler = aaec2000_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = aaec2000_timer_interrupt, }; static void __init aaec2000_timer_init(void) diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 45c930ccd064..0793dcf54f2e 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -28,7 +28,7 @@ config ARCH_CLEP7312 config ARCH_EDB7211 bool "EDB7211" select ISA - select DISCONTIGMEM + select ARCH_DISCONTIGMEM_ENABLE help Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 evaluation board. diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index c106704a2c34..dc73feb1ffb0 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -59,11 +59,13 @@ void __init autcpu12_map_io(void) } MACHINE_START(AUTCPU12, "autronix autcpu12") - MAINTAINER("Thomas Gleixner") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0020000) - MAPIO(autcpu12_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: Thomas Gleixner */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0020000, + .map_io = autcpu12_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c index 7664f9cf83b8..a46c82cd2711 100644 --- a/arch/arm/mach-clps711x/cdb89712.c +++ b/arch/arm/mach-clps711x/cdb89712.c @@ -49,10 +49,12 @@ static void __init cdb89712_map_io(void) } MACHINE_START(CDB89712, "Cirrus-CDB89712") - MAINTAINER("Ray Lehtiniemi") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0000100) - MAPIO(cdb89712_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: Ray Lehtiniemi */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = cdb89712_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c index e4093be3c4cb..780d91805984 100644 --- a/arch/arm/mach-clps711x/ceiva.c +++ b/arch/arm/mach-clps711x/ceiva.c @@ -53,10 +53,12 @@ static void __init ceiva_map_io(void) MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame") - MAINTAINER("Rob Scott") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0000100) - MAPIO(ceiva_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: Rob Scott */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = ceiva_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c index 9ca21cb481ba..c83f3fd68fcd 100644 --- a/arch/arm/mach-clps711x/clep7312.c +++ b/arch/arm/mach-clps711x/clep7312.c @@ -37,12 +37,14 @@ fixup_clep7312(struct machine_desc *desc, struct tag *tags, MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") - MAINTAINER("Nobody") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0000100) - FIXUP(fixup_clep7312) - MAPIO(clps711x_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: Nobody */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .fixup = fixup_clep7312, + .map_io = clps711x_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c index c6c46324a2e3..255c98b63e15 100644 --- a/arch/arm/mach-clps711x/edb7211-arch.c +++ b/arch/arm/mach-clps711x/edb7211-arch.c @@ -51,11 +51,13 @@ fixup_edb7211(struct machine_desc *desc, struct tag *tags, } MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") - MAINTAINER("Jon McClintock") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0020100) /* 0xc0000000 - 0xc001ffff can be video RAM */ - FIXUP(fixup_edb7211) - MAPIO(edb7211_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: Jon McClintock */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0020100, /* 0xc0000000 - 0xc001ffff can be video RAM */ + .fixup = fixup_edb7211, + .map_io = edb7211_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c index c1c5b8e01549..f83a59761e02 100644 --- a/arch/arm/mach-clps711x/fortunet.c +++ b/arch/arm/mach-clps711x/fortunet.c @@ -75,11 +75,13 @@ fortunet_fixup(struct machine_desc *desc, struct tag *tags, } MACHINE_START(FORTUNET, "ARM-FortuNet") - MAINTAINER("FortuNet Inc.") - BOOT_MEM(0xc0000000, 0x80000000, 0xf0000000) - BOOT_PARAMS(0x00000000) - FIXUP(fortunet_fixup) - MAPIO(clps711x_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: FortuNet Inc. */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, + .boot_params = 0x00000000, + .fixup = fortunet_fixup, + .map_io = clps711x_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index 29269df054f5..5bdb90edf992 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -79,12 +79,14 @@ static void __init p720t_map_io(void) } MACHINE_START(P720T, "ARM-Prospector720T") - MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0000100) - FIXUP(fixup_p720t) - MAPIO(p720t_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .fixup = fixup_p720t, + .map_io = p720t_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c index 383d4e0c6e35..1a23f0dcd4b8 100644 --- a/arch/arm/mach-clps711x/time.c +++ b/arch/arm/mach-clps711x/time.c @@ -57,8 +57,8 @@ p720t_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction clps711x_timer_irq = { .name = "CLPS711x Timer Tick", - .flags = SA_INTERRUPT, - .handler = p720t_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = p720t_timer_interrupt, }; static void __init clps711x_timer_init(void) diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index fdfededfd96f..112f1d68fb2b 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -26,6 +26,8 @@ #include <asm/irq.h> #include <asm/mach-types.h> +unsigned int vram_size; + static void cl7500_ack_irq_a(unsigned int irq) { unsigned int val, mask; @@ -296,8 +298,8 @@ clps7500_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction clps7500_timer_irq = { .name = "CLPS7500 Timer Tick", - .flags = SA_INTERRUPT, - .handler = clps7500_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = clps7500_timer_interrupt, }; /* @@ -364,11 +366,13 @@ static void __init clps7500_init(void) } MACHINE_START(CLPS7500, "CL-PS7500") - MAINTAINER("Philip Blundell") - BOOT_MEM(0x10000000, 0x03000000, 0xe0000000) - MAPIO(clps7500_map_io) - INITIRQ(clps7500_init_irq) - .init_machine = clps7500_init, - .timer = &clps7500_timer, + /* Maintainer: Philip Blundell */ + .phys_ram = 0x10000000, + .phys_io = 0x03000000, + .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, + .map_io = clps7500_map_io, + .init_irq = clps7500_init_irq, + .init_machine = clps7500_init, + .timer = &clps7500_timer, MACHINE_END diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index ef362d44949d..23c4da10101b 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -173,8 +173,8 @@ ebsa110_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction ebsa110_timer_irq = { .name = "EBSA110 Timer Tick", - .flags = SA_INTERRUPT, - .handler = ebsa110_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = ebsa110_timer_interrupt, }; /* @@ -233,13 +233,15 @@ static int __init ebsa110_init(void) arch_initcall(ebsa110_init); MACHINE_START(EBSA110, "EBSA110") - MAINTAINER("Russell King") - BOOT_MEM(0x00000000, 0xe0000000, 0xe0000000) - BOOT_PARAMS(0x00000400) - DISABLE_PARPORT(0) - DISABLE_PARPORT(2) - SOFT_REBOOT - MAPIO(ebsa110_map_io) - INITIRQ(ebsa110_init_irq) + /* Maintainer: Russell King */ + .phys_ram = 0x00000000, + .phys_io = 0xe0000000, + .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, + .boot_params = 0x00000400, + .reserve_lp0 = 1, + .reserve_lp2 = 1, + .soft_reboot = 1, + .map_io = ebsa110_map_io, + .init_irq = ebsa110_init_irq, .timer = &ebsa110_timer, MACHINE_END diff --git a/arch/arm/mach-epxa10db/arch.c b/arch/arm/mach-epxa10db/arch.c index 1b40340e8a21..7daa021676d0 100644 --- a/arch/arm/mach-epxa10db/arch.c +++ b/arch/arm/mach-epxa10db/arch.c @@ -63,10 +63,12 @@ extern void epxa10db_init_irq(void); extern struct sys_timer epxa10db_timer; MACHINE_START(CAMELOT, "Altera Epxa10db") - MAINTAINER("Altera Corporation") - BOOT_MEM(0x00000000, 0x7fffc000, 0xffffc000) - MAPIO(epxa10db_map_io) - INITIRQ(epxa10db_init_irq) + /* Maintainer: Altera Corporation */ + .phys_ram = 0x00000000, + .phys_io = 0x7fffc000, + .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, + .map_io = epxa10db_map_io, + .init_irq = epxa10db_init_irq, .timer = &epxa10db_timer, MACHINE_END diff --git a/arch/arm/mach-epxa10db/time.c b/arch/arm/mach-epxa10db/time.c index 1b991f3cc3c6..4b1084dde8dd 100644 --- a/arch/arm/mach-epxa10db/time.c +++ b/arch/arm/mach-epxa10db/time.c @@ -56,8 +56,8 @@ epxa10db_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction epxa10db_timer_irq = { .name = "Excalibur Timer Tick", - .flags = SA_INTERRUPT, - .handler = epxa10db_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = epxa10db_timer_interrupt, }; /* diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index d1ced86c379c..49b898af0032 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -84,12 +84,14 @@ fixup_cats(struct machine_desc *desc, struct tag *tags, } MACHINE_START(CATS, "Chalice-CATS") - MAINTAINER("Philip Blundell") - BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000) - BOOT_PARAMS(0x00000100) - SOFT_REBOOT - FIXUP(fixup_cats) - MAPIO(footbridge_map_io) - INITIRQ(footbridge_init_irq) + /* Maintainer: Philip Blundell */ + .phys_ram = 0x00000000, + .phys_io = DC21285_ARMCSR_BASE, + .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .soft_reboot = 1, + .fixup = fixup_cats, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, .timer = &isa_timer, MACHINE_END diff --git a/arch/arm/mach-footbridge/co285.c b/arch/arm/mach-footbridge/co285.c index e1541914fdcd..548a79081688 100644 --- a/arch/arm/mach-footbridge/co285.c +++ b/arch/arm/mach-footbridge/co285.c @@ -28,11 +28,13 @@ fixup_coebsa285(struct machine_desc *desc, struct tag *tags, } MACHINE_START(CO285, "co-EBSA285") - MAINTAINER("Mark van Doesburg") - BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0x7cf00000) - FIXUP(fixup_coebsa285) - MAPIO(footbridge_map_io) - INITIRQ(footbridge_init_irq) + /* Maintainer: Mark van Doesburg */ + .phys_ram = 0x00000000, + .phys_io = DC21285_ARMCSR_BASE, + .io_pg_offst = ((0x7cf00000) >> 18) & 0xfffc, + .fixup = fixup_coebsa285, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, .timer = &footbridge_timer, MACHINE_END diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index da5b9b7623ca..14a62d6008fe 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -43,7 +43,7 @@ timer1_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction footbridge_timer_irq = { .name = "Timer1 timer tick", .handler = timer1_interrupt, - .flags = SA_INTERRUPT, + .flags = SA_INTERRUPT | SA_TIMER, }; /* diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c index d0931f5a63c8..1c37605268d5 100644 --- a/arch/arm/mach-footbridge/ebsa285.c +++ b/arch/arm/mach-footbridge/ebsa285.c @@ -13,12 +13,15 @@ #include "common.h" MACHINE_START(EBSA285, "EBSA285") - MAINTAINER("Russell King") - BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000) - BOOT_PARAMS(0x00000100) - VIDEO(0x000a0000, 0x000bffff) - MAPIO(footbridge_map_io) - INITIRQ(footbridge_init_irq) + /* Maintainer: Russell King */ + .phys_ram = 0x00000000, + .phys_io = DC21285_ARMCSR_BASE, + .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .video_start = 0x000a0000, + .video_end = 0x000bffff, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, .timer = &footbridge_timer, MACHINE_END diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c index a4fefa0bb5a1..c1d74f7ab669 100644 --- a/arch/arm/mach-footbridge/isa-timer.c +++ b/arch/arm/mach-footbridge/isa-timer.c @@ -72,7 +72,7 @@ isa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction isa_timer_irq = { .name = "ISA timer tick", .handler = isa_timer_interrupt, - .flags = SA_INTERRUPT, + .flags = SA_INTERRUPT | SA_TIMER, }; static void __init isa_timer_init(void) diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index 1e1dfd79f4fe..775f85fc8513 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -647,14 +647,17 @@ fixup_netwinder(struct machine_desc *desc, struct tag *tags, } MACHINE_START(NETWINDER, "Rebel-NetWinder") - MAINTAINER("Russell King/Rebel.com") - BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000) - BOOT_PARAMS(0x00000100) - VIDEO(0x000a0000, 0x000bffff) - DISABLE_PARPORT(0) - DISABLE_PARPORT(2) - FIXUP(fixup_netwinder) - MAPIO(footbridge_map_io) - INITIRQ(footbridge_init_irq) + /* Maintainer: Russell King/Rebel.com */ + .phys_ram = 0x00000000, + .phys_io = DC21285_ARMCSR_BASE, + .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .video_start = 0x000a0000, + .video_end = 0x000bffff, + .reserve_lp0 = 1, + .reserve_lp2 = 1, + .fixup = fixup_netwinder, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, .timer = &isa_timer, MACHINE_END diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c index 415086d7bbee..0146b8bb59da 100644 --- a/arch/arm/mach-footbridge/personal.c +++ b/arch/arm/mach-footbridge/personal.c @@ -13,11 +13,13 @@ #include "common.h" MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer") - MAINTAINER("Jamey Hicks / George France") - BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000) - BOOT_PARAMS(0x00000100) - MAPIO(footbridge_map_io) - INITIRQ(footbridge_init_irq) + /* Maintainer: Jamey Hicks / George France */ + .phys_ram = 0x00000000, + .phys_io = DC21285_ARMCSR_BASE, + .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, .timer = &footbridge_timer, MACHINE_END diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c index 743656881ed6..af9e4a5d5ea7 100644 --- a/arch/arm/mach-h720x/cpu-h7201.c +++ b/arch/arm/mach-h720x/cpu-h7201.c @@ -41,8 +41,8 @@ h7201_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction h7201_timer_irq = { .name = "h7201 Timer Tick", - .flags = SA_INTERRUPT, - .handler = h7201_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = h7201_timer_interrupt, }; /* diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c index 21b8fb6122cd..593b6a2a30e1 100644 --- a/arch/arm/mach-h720x/cpu-h7202.c +++ b/arch/arm/mach-h720x/cpu-h7202.c @@ -171,8 +171,8 @@ static struct irqchip h7202_timerx_chip = { static struct irqaction h7202_timer_irq = { .name = "h7202 Timer Tick", - .flags = SA_INTERRUPT, - .handler = h7202_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = h7202_timer_interrupt, }; /* diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c index 9b24b9b0db15..fa59e9e2a5c8 100644 --- a/arch/arm/mach-h720x/h7201-eval.c +++ b/arch/arm/mach-h720x/h7201-eval.c @@ -30,10 +30,12 @@ #include "common.h" MACHINE_START(H7201, "Hynix GMS30C7201") - MAINTAINER("Robert Schwebel, Pengutronix") - BOOT_MEM(0x40000000, 0x80000000, 0xf0000000) - BOOT_PARAMS(0xc0001000) - MAPIO(h720x_map_io) - INITIRQ(h720x_init_irq) - .timer = &h7201_timer, + /* Maintainer: Robert Schwebel, Pengutronix */ + .phys_ram = 0x40000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, + .boot_params = 0xc0001000, + .map_io = h720x_map_io, + .init_irq = h720x_init_irq, + .timer = &h7201_timer, MACHINE_END diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c index 3456a00d5f5c..db9078ad008c 100644 --- a/arch/arm/mach-h720x/h7202-eval.c +++ b/arch/arm/mach-h720x/h7202-eval.c @@ -71,11 +71,13 @@ static void __init init_eval_h7202(void) } MACHINE_START(H7202, "Hynix HMS30C7202") - MAINTAINER("Robert Schwebel, Pengutronix") - BOOT_MEM(0x40000000, 0x80000000, 0xf0000000) - BOOT_PARAMS(0x40000100) - MAPIO(h720x_map_io) - INITIRQ(h7202_init_irq) - .timer = &h7202_timer, - INIT_MACHINE(init_eval_h7202) + /* Maintainer: Robert Schwebel, Pengutronix */ + .phys_ram = 0x40000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, + .boot_params = 0x40000100, + .map_io = h720x_map_io, + .init_irq = h7202_init_irq, + .timer = &h7202_timer, + .init_machine = init_eval_h7202, MACHINE_END diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index 625dd01c2578..5d25434d332c 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -78,11 +78,13 @@ mx1ads_map_io(void) } MACHINE_START(MX1ADS, "Motorola MX1ADS") - MAINTAINER("Sascha Hauer, Pengutronix") - BOOT_MEM(0x08000000, 0x00200000, 0xe0200000) - BOOT_PARAMS(0x08000100) - MAPIO(mx1ads_map_io) - INITIRQ(imx_init_irq) + /* Maintainer: Sascha Hauer, Pengutronix */ + .phys_ram = 0x08000000, + .phys_io = 0x00200000, + .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc, + .boot_params = 0x08000100, + .map_io = mx1ads_map_io, + .init_irq = imx_init_irq, .timer = &imx_timer, - INIT_MACHINE(mx1ads_init) + .init_machine = mx1ads_init, MACHINE_END diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index 11f1e56c36bc..ea805bfa5e54 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -72,8 +72,8 @@ imx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction imx_timer_irq = { .name = "i.MX Timer Tick", - .flags = SA_INTERRUPT, - .handler = imx_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = imx_timer_interrupt, }; /* diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index bd1e5e3c9d34..dacbf504dae2 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -20,6 +20,7 @@ #include <asm/irq.h> #include <asm/io.h> #include <asm/hardware/amba.h> +#include <asm/hardware/arm_timer.h> #include <asm/arch/cm.h> #include <asm/system.h> #include <asm/leds.h> @@ -156,16 +157,6 @@ EXPORT_SYMBOL(cm_control); #define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) #endif -/* - * What does it look like? - */ -typedef struct TimerStruct { - unsigned long TimerLoad; - unsigned long TimerValue; - unsigned long TimerControl; - unsigned long TimerClear; -} TimerStruct_t; - static unsigned long timer_reload; /* @@ -174,7 +165,6 @@ static unsigned long timer_reload; */ unsigned long integrator_gettimeoffset(void) { - volatile TimerStruct_t *timer1 = (TimerStruct_t *)TIMER1_VA_BASE; unsigned long ticks1, ticks2, status; /* @@ -183,11 +173,11 @@ unsigned long integrator_gettimeoffset(void) * an interrupt. We get around this by ensuring that the * counter has not reloaded between our two reads. */ - ticks2 = timer1->TimerValue & 0xffff; + ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; do { ticks1 = ticks2; status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS); - ticks2 = timer1->TimerValue & 0xffff; + ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; } while (ticks2 > ticks1); /* @@ -213,14 +203,12 @@ unsigned long integrator_gettimeoffset(void) static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE; - write_seqlock(&xtime_lock); /* * clear the interrupt */ - timer1->TimerClear = 1; + writel(1, TIMER1_VA_BASE + TIMER_INTCLR); /* * the clock tick routines are only processed on the @@ -247,8 +235,8 @@ integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction integrator_timer_irq = { .name = "Integrator Timer Tick", - .flags = SA_INTERRUPT, - .handler = integrator_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = integrator_timer_interrupt, }; /* @@ -256,32 +244,29 @@ static struct irqaction integrator_timer_irq = { */ void __init integrator_time_init(unsigned long reload, unsigned int ctrl) { - volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE; - volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE; - volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE; - unsigned int timer_ctrl = 0x80 | 0x40; /* periodic */ + unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; timer_reload = reload; timer_ctrl |= ctrl; if (timer_reload > 0x100000) { timer_reload >>= 8; - timer_ctrl |= 0x08; /* /256 */ + timer_ctrl |= TIMER_CTRL_DIV256; } else if (timer_reload > 0x010000) { timer_reload >>= 4; - timer_ctrl |= 0x04; /* /16 */ + timer_ctrl |= TIMER_CTRL_DIV16; } /* * Initialise to a known state (all timers off) */ - timer0->TimerControl = 0; - timer1->TimerControl = 0; - timer2->TimerControl = 0; + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); - timer1->TimerLoad = timer_reload; - timer1->TimerValue = timer_reload; - timer1->TimerControl = timer_ctrl; + writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD); + writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE); + writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL); /* * Make irqs happen for the system timer diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 91ba9fd79c87..36e2b6eb67b7 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -292,11 +292,13 @@ static struct sys_timer ap_timer = { }; MACHINE_START(INTEGRATOR, "ARM-Integrator") - MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd") - BOOT_MEM(0x00000000, 0x16000000, 0xf1600000) - BOOT_PARAMS(0x00000100) - MAPIO(ap_map_io) - INITIRQ(ap_init_irq) + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0x00000000, + .phys_io = 0x16000000, + .io_pg_offst = ((0xf1600000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ap_map_io, + .init_irq = ap_init_irq, .timer = &ap_timer, - INIT_MACHINE(ap_init) + .init_machine = ap_init, MACHINE_END diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index e0a01eef0993..569f328c479d 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -532,11 +532,13 @@ static struct sys_timer cp_timer = { }; MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") - MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd") - BOOT_MEM(0x00000000, 0x16000000, 0xf1600000) - BOOT_PARAMS(0x00000100) - MAPIO(intcp_map_io) - INITIRQ(intcp_init_irq) + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0x00000000, + .phys_io = 0x16000000, + .io_pg_offst = ((0xf1600000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = intcp_map_io, + .init_irq = intcp_init_irq, .timer = &cp_timer, - INIT_MACHINE(intcp_init) + .init_machine = intcp_init, MACHINE_END diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c index ead15dfcb53d..ea10bd8c972c 100644 --- a/arch/arm/mach-integrator/platsmp.c +++ b/arch/arm/mach-integrator/platsmp.c @@ -15,6 +15,7 @@ #include <linux/mm.h> #include <asm/atomic.h> +#include <asm/cacheflush.h> #include <asm/delay.h> #include <asm/mmu_context.h> #include <asm/procinfo.h> @@ -27,12 +28,12 @@ extern void integrator_secondary_startup(void); * control for which core is the next to come out of the secondary * boot "holding pen" */ -volatile int __initdata pen_release = -1; -unsigned long __initdata phys_pen_release = 0; +volatile int __cpuinitdata pen_release = -1; +unsigned long __cpuinitdata phys_pen_release = 0; static DEFINE_SPINLOCK(boot_lock); -void __init platform_secondary_init(unsigned int cpu) +void __cpuinit platform_secondary_init(unsigned int cpu) { /* * the primary core may have used a "cross call" soft interrupt @@ -61,7 +62,7 @@ void __init platform_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -int __init boot_secondary(unsigned int cpu, struct task_struct *idle) +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; @@ -80,6 +81,7 @@ int __init boot_secondary(unsigned int cpu, struct task_struct *idle) * "cpu" is Linux's internal ID. */ pen_release = cpu; + flush_cache_all(); /* * XXX @@ -174,11 +176,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus) max_cpus = ncores; /* - * Initialise the present mask - this tells us which CPUs should - * be present. + * Initialise the possible/present maps. + * cpu_possible_map describes the set of CPUs which may be present + * cpu_present_map describes the set of CPUs populated */ for (i = 0; i < max_cpus; i++) { - cpu_set(i, cpu_present_mask); + cpu_set(i, cpu_possible_map); + cpu_set(i, cpu_present_map); } /* diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c index bf23e0fd2843..0f921ba2750c 100644 --- a/arch/arm/mach-iop3xx/iop321-setup.c +++ b/arch/arm/mach-iop3xx/iop321-setup.c @@ -146,23 +146,27 @@ extern void iop321_init_time(void); #if defined(CONFIG_ARCH_IQ80321) MACHINE_START(IQ80321, "Intel IQ80321") - MAINTAINER("Intel Corporation") - BOOT_MEM(PHYS_OFFSET, IQ80321_UART, IQ80321_UART) - MAPIO(iq80321_map_io) - INITIRQ(iop321_init_irq) + /* Maintainer: Intel Corporation */ + .phys_ram = PHYS_OFFSET, + .phys_io = IQ80321_UART, + .io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc, + .map_io = iq80321_map_io, + .init_irq = iop321_init_irq, .timer = &iop321_timer, - BOOT_PARAMS(0xa0000100) - INIT_MACHINE(iop32x_init) + .boot_params = 0xa0000100, + .init_machine = iop32x_init, MACHINE_END #elif defined(CONFIG_ARCH_IQ31244) MACHINE_START(IQ31244, "Intel IQ31244") - MAINTAINER("Intel Corp.") - BOOT_MEM(PHYS_OFFSET, IQ31244_UART, IQ31244_UART) - MAPIO(iq31244_map_io) - INITIRQ(iop321_init_irq) + /* Maintainer: Intel Corp. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IQ31244_UART, + .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, + .map_io = iq31244_map_io, + .init_irq = iop321_init_irq, .timer = &iop321_timer, - BOOT_PARAMS(0xa0000100) - INIT_MACHINE(iop32x_init) + .boot_params = 0xa0000100, + .init_machine = iop32x_init, MACHINE_END #else #error No machine descriptor defined for this IOP3XX implementation diff --git a/arch/arm/mach-iop3xx/iop321-time.c b/arch/arm/mach-iop3xx/iop321-time.c index 9b7dd64d1b8f..d53af1669502 100644 --- a/arch/arm/mach-iop3xx/iop321-time.c +++ b/arch/arm/mach-iop3xx/iop321-time.c @@ -86,7 +86,7 @@ iop321_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction iop321_timer_irq = { .name = "IOP321 Timer Tick", .handler = iop321_timer_interrupt, - .flags = SA_INTERRUPT + .flags = SA_INTERRUPT | SA_TIMER, }; static void __init iop321_timer_init(void) diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c index 622e7914819a..fc74b722f72f 100644 --- a/arch/arm/mach-iop3xx/iop331-setup.c +++ b/arch/arm/mach-iop3xx/iop331-setup.c @@ -148,26 +148,28 @@ extern void iq80332_map_io(void); #if defined(CONFIG_ARCH_IQ80331) MACHINE_START(IQ80331, "Intel IQ80331") - MAINTAINER("Intel Corp.") - BOOT_MEM(PHYS_OFFSET, 0xfefff000, 0xfffff000) // virtual, physical - //BOOT_MEM(PHYS_OFFSET, IOP331_UART0_VIRT, IOP331_UART0_PHYS) - MAPIO(iq80331_map_io) - INITIRQ(iop331_init_irq) + /* Maintainer: Intel Corp. */ + .phys_ram = PHYS_OFFSET, + .phys_io = 0xfefff000, + .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical + .map_io = iq80331_map_io, + .init_irq = iop331_init_irq, .timer = &iop331_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(iop33x_init) + .boot_params = 0x0100, + .init_machine = iop33x_init, MACHINE_END #elif defined(CONFIG_MACH_IQ80332) MACHINE_START(IQ80332, "Intel IQ80332") - MAINTAINER("Intel Corp.") - BOOT_MEM(PHYS_OFFSET, 0xfefff000, 0xfffff000) // virtual, physical - //BOOT_MEM(PHYS_OFFSET, IOP331_UART0_VIRT, IOP331_UART0_PHYS) - MAPIO(iq80332_map_io) - INITIRQ(iop331_init_irq) + /* Maintainer: Intel Corp. */ + .phys_ram = PHYS_OFFSET, + .phys_io = 0xfefff000, + .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical + .map_io = iq80332_map_io, + .init_irq = iop331_init_irq, .timer = &iop331_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(iop33x_init) + .boot_params = 0x0100, + .init_machine = iop33x_init, MACHINE_END #else diff --git a/arch/arm/mach-iop3xx/iop331-time.c b/arch/arm/mach-iop3xx/iop331-time.c index e01696769263..1a6d9d661e4b 100644 --- a/arch/arm/mach-iop3xx/iop331-time.c +++ b/arch/arm/mach-iop3xx/iop331-time.c @@ -83,7 +83,7 @@ iop331_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction iop331_timer_irq = { .name = "IOP331 Timer Tick", .handler = iop331_timer_interrupt, - .flags = SA_INTERRUPT + .flags = SA_INTERRUPT | SA_TIMER, }; static void __init iop331_timer_init(void) diff --git a/arch/arm/mach-ixp2000/Kconfig b/arch/arm/mach-ixp2000/Kconfig index 9361e05f6fa3..ecb58d83478e 100644 --- a/arch/arm/mach-ixp2000/Kconfig +++ b/arch/arm/mach-ixp2000/Kconfig @@ -54,6 +54,14 @@ config ARCH_IXDP2X01 depends on ARCH_IXDP2401 || ARCH_IXDP2801 default y +config IXP2000_SUPPORT_BROKEN_PCI_IO + bool "Support broken PCI I/O on older IXP2000s" + default y + help + Say 'N' here if you only intend to run your kernel on an + IXP2000 B0 or later model and do not need the PCI I/O + byteswap workaround. Say 'Y' otherwise. + endmenu endif diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index fc0555596d6d..45b18658499f 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -23,7 +23,7 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/bitops.h> -#include <linux/serial_core.h> +#include <linux/serial_8250.h> #include <linux/mm.h> #include <asm/types.h> @@ -40,6 +40,8 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> +#include <asm/arch/gpio.h> + static DEFINE_SPINLOCK(ixp2000_slowport_lock); static unsigned long ixp2000_slowport_irq_flags; @@ -101,6 +103,11 @@ static struct map_desc ixp2000_io_desc[] __initdata = { .length = IXP2000_PCI_CSR_SIZE, .type = MT_DEVICE }, { + .virtual = IXP2000_MSF_VIRT_BASE, + .physical = IXP2000_MSF_PHYS_BASE, + .length = IXP2000_MSF_SIZE, + .type = MT_DEVICE + }, { .virtual = IXP2000_PCI_IO_VIRT_BASE, .physical = IXP2000_PCI_IO_PHYS_BASE, .length = IXP2000_PCI_IO_SIZE, @@ -118,19 +125,6 @@ static struct map_desc ixp2000_io_desc[] __initdata = { } }; -static struct uart_port ixp2000_serial_port = { - .membase = (char *)(IXP2000_UART_VIRT_BASE + 3), - .mapbase = IXP2000_UART_PHYS_BASE + 3, - .irq = IRQ_IXP2000_UART, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 50000000, - .line = 0, - .type = PORT_XSCALE, - .fifosize = 16 -}; - void __init ixp2000_map_io(void) { extern unsigned int processor_id; @@ -150,12 +144,50 @@ void __init ixp2000_map_io(void) } iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc)); - early_serial_setup(&ixp2000_serial_port); /* Set slowport to 8-bit mode. */ ixp2000_reg_write(IXP2000_SLOWPORT_FRM, 1); } + +/************************************************************************* + * Serial port support for IXP2000 + *************************************************************************/ +static struct plat_serial8250_port ixp2000_serial_port[] = { + { + .mapbase = IXP2000_UART_PHYS_BASE, + .membase = (char *)(IXP2000_UART_VIRT_BASE + 3), + .irq = IRQ_IXP2000_UART, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = 50000000, + }, + { }, +}; + +static struct resource ixp2000_uart_resource = { + .start = IXP2000_UART_PHYS_BASE, + .end = IXP2000_UART_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ixp2000_serial_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = ixp2000_serial_port, + }, + .num_resources = 1, + .resource = &ixp2000_uart_resource, +}; + +void __init ixp2000_uart_init(void) +{ + platform_device_register(&ixp2000_serial_device); +} + + /************************************************************************* * Timer-tick functions for IXP2000 *************************************************************************/ @@ -179,7 +211,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* clear timer 1 */ ixp2000_reg_write(IXP2000_T1_CLR, 1); - + while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) { timer_tick(regs); next_jiffy_time -= ticks_per_jiffy; @@ -192,8 +224,8 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction ixp2000_timer_irq = { .name = "IXP2000 Timer Tick", - .flags = SA_INTERRUPT, - .handler = ixp2000_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = ixp2000_timer_interrupt, }; void __init ixp2000_init_time(unsigned long tick_rate) @@ -238,35 +270,40 @@ void __init ixp2000_init_time(unsigned long tick_rate) /************************************************************************* * GPIO helpers *************************************************************************/ -static unsigned long GPIO_IRQ_rising_edge; static unsigned long GPIO_IRQ_falling_edge; +static unsigned long GPIO_IRQ_rising_edge; static unsigned long GPIO_IRQ_level_low; static unsigned long GPIO_IRQ_level_high; -void gpio_line_config(int line, int style) +static void update_gpio_int_csrs(void) +{ + ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); + ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); + ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); + ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); +} + +void gpio_line_config(int line, int direction) { unsigned long flags; local_irq_save(flags); + if (direction == GPIO_OUT) { + irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0; - if(style == GPIO_OUT) { /* if it's an output, it ain't an interrupt anymore */ - ixp2000_reg_write(IXP2000_GPIO_PDSR, (1 << line)); GPIO_IRQ_falling_edge &= ~(1 << line); GPIO_IRQ_rising_edge &= ~(1 << line); GPIO_IRQ_level_low &= ~(1 << line); GPIO_IRQ_level_high &= ~(1 << line); - ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); - ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); - ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); - ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); - irq_desc[line+IRQ_IXP2000_GPIO0].valid = 0; - } else if(style == GPIO_IN) { - ixp2000_reg_write(IXP2000_GPIO_PDCR, (1 << line)); + update_gpio_int_csrs(); + + ixp2000_reg_write(IXP2000_GPIO_PDSR, 1 << line); + } else if (direction == GPIO_IN) { + ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); } - local_irq_restore(flags); -} +} /************************************************************************* @@ -285,9 +322,50 @@ static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irqdesc *desc, str } } +static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type) +{ + int line = irq - IRQ_IXP2000_GPIO0; + + /* + * First, configure this GPIO line as an input. + */ + ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); + + /* + * Then, set the proper trigger type. + */ + if (type & IRQT_FALLING) + GPIO_IRQ_falling_edge |= 1 << line; + else + GPIO_IRQ_falling_edge &= ~(1 << line); + if (type & IRQT_RISING) + GPIO_IRQ_rising_edge |= 1 << line; + else + GPIO_IRQ_rising_edge &= ~(1 << line); + if (type & IRQT_LOW) + GPIO_IRQ_level_low |= 1 << line; + else + GPIO_IRQ_level_low &= ~(1 << line); + if (type & IRQT_HIGH) + GPIO_IRQ_level_high |= 1 << line; + else + GPIO_IRQ_level_high &= ~(1 << line); + update_gpio_int_csrs(); + + /* + * Finally, mark the corresponding IRQ as valid. + */ + irq_desc[irq].valid = 1; + + return 0; +} + static void ixp2000_GPIO_irq_mask_ack(unsigned int irq) { ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); + + ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); + ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); } @@ -302,6 +380,7 @@ static void ixp2000_GPIO_irq_unmask(unsigned int irq) } static struct irqchip ixp2000_GPIO_irq_chip = { + .type = ixp2000_GPIO_irq_type, .ack = ixp2000_GPIO_irq_mask_ack, .mask = ixp2000_GPIO_irq_mask, .unmask = ixp2000_GPIO_irq_unmask @@ -338,7 +417,7 @@ static void ixp2000_irq_mask(unsigned int irq) static void ixp2000_irq_unmask(unsigned int irq) { - ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq)); + ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq)); } static struct irqchip ixp2000_irq_chip = { @@ -375,16 +454,16 @@ void __init ixp2000_init_irq(void) * our mask/unmask code much simpler. */ for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) { - if((1 << irq) & IXP2000_VALID_IRQ_MASK) { + if ((1 << irq) & IXP2000_VALID_IRQ_MASK) { set_irq_chip(irq, &ixp2000_irq_chip); set_irq_handler(irq, do_level_IRQ); set_irq_flags(irq, IRQF_VALID); } else set_irq_flags(irq, 0); } - + /* * GPIO IRQs are invalid until someone sets the interrupt mode - * by calling gpio_line_set(); + * by calling set_irq_type(). */ for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) { set_irq_chip(irq, &ixp2000_GPIO_irq_chip); diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 04b38bcf9aac..9aa54de44740 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -197,24 +197,42 @@ static struct platform_device enp2611_flash = { .resource = &enp2611_flash_resource, }; +static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = { + .sda_pin = ENP2611_GPIO_SDA, + .scl_pin = ENP2611_GPIO_SCL, +}; + +static struct platform_device enp2611_i2c_controller = { + .name = "IXP2000-I2C", + .id = 0, + .dev = { + .platform_data = &enp2611_i2c_gpio_pins + }, + .num_resources = 0 +}; + static struct platform_device *enp2611_devices[] __initdata = { - &enp2611_flash + &enp2611_flash, + &enp2611_i2c_controller }; static void __init enp2611_init_machine(void) { platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices)); + ixp2000_uart_init(); } MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board") - MAINTAINER("Lennert Buytenhek <buytenh@wantstofly.org>") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixp2000_map_io) - INITIRQ(ixp2000_init_irq) + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixp2000_map_io, + .init_irq = ixp2000_init_irq, .timer = &enp2611_timer, - INIT_MACHINE(enp2611_init_machine) + .init_machine = enp2611_init_machine, MACHINE_END diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index df3ff26c8cdd..fd280a93637e 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -168,12 +168,14 @@ void ixdp2400_init_irq(void) } MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x00_map_io) - INITIRQ(ixdp2400_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x00_map_io, + .init_irq = ixdp2400_init_irq, .timer = &ixdp2400_timer, - INIT_MACHINE(ixdp2x00_init_machine) + .init_machine = ixdp2x00_init_machine, MACHINE_END diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index aec13c7108a9..f9073aa28615 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -42,12 +42,6 @@ #include <asm/mach/flash.h> #include <asm/mach/arch.h> - -void ixdp2400_init_irq(void) -{ - ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2400_NR_IRQS); -} - /************************************************************************* * IXDP2800 timer tick *************************************************************************/ @@ -290,12 +284,14 @@ void ixdp2800_init_irq(void) } MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x00_map_io) - INITIRQ(ixdp2800_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x00_map_io, + .init_irq = ixdp2800_init_irq, .timer = &ixdp2800_timer, - INIT_MACHINE(ixdp2x00_init_machine) + .init_machine = ixdp2x00_init_machine, MACHINE_END diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 21c41fe15b99..a43369ad876c 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -42,6 +42,9 @@ #include <asm/mach/flash.h> #include <asm/mach/arch.h> +#include <asm/arch/gpio.h> + + /************************************************************************* * IXDP2x00 IRQ Initialization *************************************************************************/ @@ -300,5 +303,6 @@ void __init ixdp2x00_init_machine(void) gpio_line_config(IXDP2X00_GPIO_I2C_ENABLE, GPIO_OUT); platform_add_devices(ixdp2x00_devices, ARRAY_SIZE(ixdp2x00_devices)); + ixp2000_uart_init(); } diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index e94dace3d412..43447dad1657 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -370,30 +370,35 @@ static void __init ixdp2x01_init_machine(void) ((*IXDP2X01_CPLD_FLASH_REG & IXDP2X01_CPLD_FLASH_BANK_MASK) + 1); platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices)); + ixp2000_uart_init(); } #ifdef CONFIG_ARCH_IXDP2401 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x01_map_io) - INITIRQ(ixdp2x01_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x01_map_io, + .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, - INIT_MACHINE(ixdp2x01_init_machine) + .init_machine = ixdp2x01_init_machine, MACHINE_END #endif #ifdef CONFIG_ARCH_IXDP2801 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x01_map_io) - INITIRQ(ixdp2x01_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x01_map_io, + .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, - INIT_MACHINE(ixdp2x01_init_machine) + .init_machine = ixdp2x01_init_machine, MACHINE_END #endif diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 5ff2f2718c58..0788fb2b5c10 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -198,6 +198,19 @@ clear_master_aborts(void) void __init ixp2000_pci_preinit(void) { +#ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO + /* + * Configure the PCI unit to properly byteswap I/O transactions, + * and verify that it worked. + */ + ixp2000_reg_write(IXP2000_PCI_CONTROL, + (*IXP2000_PCI_CONTROL | PCI_CONTROL_IEE)); + + if ((*IXP2000_PCI_CONTROL & PCI_CONTROL_IEE) == 0) + panic("IXP2000: PCI I/O is broken on this ixp model, and " + "the needed workaround has not been configured in"); +#endif + hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, "PCI config cycle to non-existent device"); } diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index aa92e3708838..2b544363c078 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -453,8 +453,8 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys) local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); res[0].name = "PCI I/O Space"; - res[0].start = 0x00001000; - res[0].end = 0xffff0000; + res[0].start = 0x00000000; + res[0].end = 0x0000ffff; res[0].flags = IORESOURCE_IO; res[1].name = "PCI Memory Space"; diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 267ba02d77dc..04490a9f8f6e 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -141,7 +141,15 @@ static struct map_desc ixp4xx_io_desc[] __initdata = { .physical = IXP4XX_PCI_CFG_BASE_PHYS, .length = IXP4XX_PCI_CFG_REGION_SIZE, .type = MT_DEVICE + }, +#ifdef CONFIG_DEBUG_LL + { /* Debug UART mapping */ + .virtual = IXP4XX_DEBUG_UART_BASE_VIRT, + .physical = IXP4XX_DEBUG_UART_BASE_PHYS, + .length = IXP4XX_DEBUG_UART_REGION_SIZE, + .type = MT_DEVICE } +#endif }; void __init ixp4xx_map_io(void) @@ -290,8 +298,8 @@ static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs static struct irqaction ixp4xx_timer_irq = { .name = "IXP4xx Timer Tick", - .flags = SA_INTERRUPT, - .handler = ixp4xx_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = ixp4xx_timer_interrupt, }; static void __init ixp4xx_timer_init(void) diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 8a05a1227e5f..7f58afb27e71 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -56,21 +56,24 @@ static struct resource coyote_uart_resource = { .flags = IORESOURCE_MEM, }; -static struct plat_serial8250_port coyote_uart_data = { - .mapbase = IXP4XX_UART2_BASE_PHYS, - .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, - .irq = IRQ_IXP4XX_UART2, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, +static struct plat_serial8250_port coyote_uart_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, }; static struct platform_device coyote_uart = { .name = "serial8250", .id = 0, .dev = { - .platform_data = &coyote_uart_data, + .platform_data = coyote_uart_data, }, .num_resources = 1, .resource = &coyote_uart_resource, @@ -87,10 +90,10 @@ static void __init coyote_init(void) *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; if (machine_is_ixdpg425()) { - coyote_uart_data.membase = + coyote_uart_data[0].membase = (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET); - coyote_uart_data.mapbase = IXP4XX_UART1_BASE_PHYS; - coyote_uart_data.irq = IRQ_IXP4XX_UART1; + coyote_uart_data[0].mapbase = IXP4XX_UART1_BASE_PHYS; + coyote_uart_data[0].irq = IRQ_IXP4XX_UART1; } @@ -100,14 +103,15 @@ static void __init coyote_init(void) #ifdef CONFIG_ARCH_ADI_COYOTE MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(coyote_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = coyote_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(coyote_init) + .boot_params = 0x0100, + .init_machine = coyote_init, MACHINE_END #endif @@ -117,14 +121,15 @@ MACHINE_END */ #ifdef CONFIG_MACH_IXDPG425 MACHINE_START(IXDPG425, "Intel IXDPG425") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(coyote_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = coyote_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(coyote_init) + .boot_params = 0x0100, + .init_machine = coyote_init, MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index e77c86efd21d..65e356bd10d6 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -83,7 +83,7 @@ static struct plat_serial8250_port gtwx5715_uart_platform_data[] = { .mapbase = IXP4XX_UART2_BASE_PHYS, .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, .irq = IRQ_IXP4XX_UART2, - .flags = UPF_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, .iotype = UPIO_MEM, .regshift = 2, .uartclk = IXP4XX_UART_XTAL, @@ -140,14 +140,15 @@ static void __init gtwx5715_init(void) MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)") - MAINTAINER("George Joseph") - BOOT_MEM(PHYS_OFFSET, IXP4XX_UART2_BASE_PHYS, - IXP4XX_UART2_BASE_VIRT) - MAPIO(gtwx5715_map_io) - INITIRQ(ixp4xx_init_irq) - .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(gtwx5715_init) + /* Maintainer: George Joseph */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_UART2_BASE_PHYS, + .io_pg_offst = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc, + .map_io = gtwx5715_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = gtwx5715_init, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 77346c1f676b..4633470a6a37 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -82,7 +82,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = { .mapbase = IXP4XX_UART1_BASE_PHYS, .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, .irq = IRQ_IXP4XX_UART1, - .flags = UPF_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, .iotype = UPIO_MEM, .regshift = 2, .uartclk = IXP4XX_UART_XTAL, @@ -91,11 +91,12 @@ static struct plat_serial8250_port ixdp425_uart_data[] = { .mapbase = IXP4XX_UART2_BASE_PHYS, .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, .irq = IRQ_IXP4XX_UART1, - .flags = UPF_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, .iotype = UPIO_MEM, .regshift = 2, .uartclk = IXP4XX_UART_XTAL, - } + }, + { }, }; static struct platform_device ixdp425_uart = { @@ -128,36 +129,39 @@ static void __init ixdp425_init(void) } MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(ixdp425_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixdp425_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(ixdp425_init) + .boot_params = 0x0100, + .init_machine = ixdp425_init, MACHINE_END MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(ixdp425_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixdp425_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(ixdp425_init) + .boot_params = 0x0100, + .init_machine = ixdp425_init, MACHINE_END MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(ixdp425_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixdp425_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(ixdp425_init) + .boot_params = 0x0100, + .init_machine = ixdp425_init, MACHINE_END /* @@ -168,14 +172,15 @@ MACHINE_END */ #ifdef CONFIG_ARCH_AVILA MACHINE_START(AVILA, "Gateworks Avila Network Platform") - MAINTAINER("Deepak Saxena <dsaxena@plexity.net>") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(ixdp425_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixdp425_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(ixdp425_init) + .boot_params = 0x0100, + .init_machine = ixdp425_init, MACHINE_END #endif diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c index 606ca95f8217..2a7fee2a7635 100644 --- a/arch/arm/mach-l7200/core.c +++ b/arch/arm/mach-l7200/core.c @@ -81,9 +81,11 @@ static void __init l7200_map_io(void) } MACHINE_START(L7200, "LinkUp Systems L7200") - MAINTAINER("Steve Hill / Scott McConnell") - BOOT_MEM(0xf0000000, 0x80040000, 0xd0000000) - MAPIO(l7200_map_io) - INITIRQ(l7200_init_irq) + /* Maintainer: Steve Hill / Scott McConnell */ + .phys_ram = 0xf0000000, + .phys_io = 0x80040000, + .io_pg_offst = ((0xd0000000) >> 18) & 0xfffc, + .map_io = l7200_map_io, + .init_irq = l7200_init_irq, MACHINE_END diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c index be5d17fe9dcb..cb3dcd3bd00a 100644 --- a/arch/arm/mach-lh7a40x/arch-kev7a400.c +++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c @@ -102,10 +102,12 @@ void __init lh7a40x_init_board_irq (void) } MACHINE_START (KEV7A400, "Sharp KEV7a400") - MAINTAINER ("Marc Singer") - BOOT_MEM (0xc0000000, 0x80000000, io_p2v (0x80000000)) - BOOT_PARAMS (0xc0000100) - MAPIO (kev7a400_map_io) - INITIRQ (lh7a400_init_irq) + /* Maintainer: Marc Singer */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = kev7a400_map_io, + .init_irq = lh7a400_init_irq, .timer = &lh7a40x_timer, MACHINE_END diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c index c823447a150f..6eb61a17c63b 100644 --- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c +++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c @@ -260,13 +260,15 @@ lpd7a400_map_io(void) #ifdef CONFIG_MACH_LPD7A400 MACHINE_START (LPD7A400, "Logic Product Development LPD7A400-10") - MAINTAINER ("Marc Singer") - BOOT_MEM (0xc0000000, 0x80000000, io_p2v (0x80000000)) - BOOT_PARAMS (0xc0000100) - MAPIO (lpd7a400_map_io) - INITIRQ (lh7a400_init_irq) + /* Maintainer: Marc Singer */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = lpd7a400_map_io, + .init_irq = lh7a400_init_irq, .timer = &lh7a40x_timer, - INIT_MACHINE (lpd7a40x_init) + .init_machine = lpd7a40x_init, MACHINE_END #endif @@ -274,13 +276,15 @@ MACHINE_END #ifdef CONFIG_MACH_LPD7A404 MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10") - MAINTAINER ("Marc Singer") - BOOT_MEM (0xc0000000, 0x80000000, io_p2v (0x80000000)) - BOOT_PARAMS (0xc0000100) - MAPIO (lpd7a400_map_io) - INITIRQ (lh7a404_init_irq) + /* Maintainer: Marc Singer */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = lpd7a400_map_io, + .init_irq = lh7a404_init_irq, .timer = &lh7a40x_timer, - INIT_MACHINE (lpd7a40x_init) + .init_machine = lpd7a40x_init, MACHINE_END #endif diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c index 51e1c814b400..be377e331f25 100644 --- a/arch/arm/mach-lh7a40x/time.c +++ b/arch/arm/mach-lh7a40x/time.c @@ -53,8 +53,8 @@ lh7a40x_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction lh7a40x_timer_irq = { .name = "LHA740x Timer Tick", - .flags = SA_INTERRUPT, - .handler = lh7a40x_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = lh7a40x_timer_interrupt, }; static void __init lh7a40x_timer_init(void) diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig deleted file mode 100644 index 9e42efa66b2b..000000000000 --- a/arch/arm/mach-omap/Kconfig +++ /dev/null @@ -1,221 +0,0 @@ -if ARCH_OMAP - -menu "TI OMAP Implementations" - -comment "OMAP Core Type" - -config ARCH_OMAP730 - depends on ARCH_OMAP - bool "OMAP730 Based System" - select ARCH_OMAP_OTG - -config ARCH_OMAP1510 - depends on ARCH_OMAP - default y - bool "OMAP1510 Based System" - -config ARCH_OMAP16XX - depends on ARCH_OMAP - bool "OMAP16XX Based System" - select ARCH_OMAP_OTG - -config ARCH_OMAP_OTG - bool - -comment "OMAP Board Type" - -config MACH_OMAP_INNOVATOR - bool "TI Innovator" - depends on ARCH_OMAP1510 || ARCH_OMAP16XX - help - TI OMAP 1510 or 1610 Innovator board support. Say Y here if you - have such a board. - -config MACH_OMAP_H2 - bool "TI H2 Support" - depends on ARCH_OMAP16XX - help - TI OMAP 1610/1611B H2 board support. Say Y here if you have such - a board. - -config MACH_OMAP_H3 - bool "TI H3 Support" - depends on ARCH_OMAP16XX - help - TI OMAP 1710 H3 board support. Say Y here if you have such - a board. - -config MACH_OMAP_H4 - bool "TI H4 Support" - depends on ARCH_OMAP16XX - help - TI OMAP 1610 H4 board support. Say Y here if you have such - a board. - -config MACH_OMAP_OSK - bool "TI OSK Support" - depends on ARCH_OMAP16XX - help - TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here - if you have such a board. - -config MACH_OMAP_PERSEUS2 - bool "TI Perseus2" - depends on ARCH_OMAP730 - help - Support for TI OMAP 730 Perseus2 board. Say Y here if you have such - a board. - -config MACH_VOICEBLUE - bool "Voiceblue" - depends on ARCH_OMAP1510 - help - Support for Voiceblue GSM/VoIP gateway. Say Y here if you have such - board. - -config MACH_NETSTAR - bool "NetStar" - depends on ARCH_OMAP1510 - help - Support for NetStar PBX. Say Y here if you have such a board. - -config MACH_OMAP_GENERIC - bool "Generic OMAP board" - depends on ARCH_OMAP1510 || ARCH_OMAP16XX - help - Support for generic OMAP-1510, 1610 or 1710 board with - no FPGA. Can be used as template for porting Linux to - custom OMAP boards. Say Y here if you have a custom - board. - -comment "OMAP Feature Selections" - -#config OMAP_BOOT_TAG -# bool "OMAP bootloader information passing" -# depends on ARCH_OMAP -# default n -# help -# Say Y, if you have a bootloader which passes information -# about your board and its peripheral configuration. - -config OMAP_MUX - bool "OMAP multiplexing support" - depends on ARCH_OMAP - default y - help - Pin multiplexing support for OMAP boards. If your bootloader - sets the multiplexing correctly, say N. Otherwise, or if unsure, - say Y. - -config OMAP_MUX_DEBUG - bool "Multiplexing debug output" - depends on OMAP_MUX - default n - help - Makes the multiplexing functions print out a lot of debug info. - This is useful if you want to find out the correct values of the - multiplexing registers. - -config OMAP_MUX_WARNINGS - bool "Warn about pins the bootloader didn't set up" - depends on OMAP_MUX - default y - help - Choose Y here to warn whenever driver initialization logic needs - to change the pin multiplexing setup. When there are no warnings - printed, it's safe to deselect OMAP_MUX for your product. - -choice - prompt "System timer" - default OMAP_MPU_TIMER - -config OMAP_MPU_TIMER - bool "Use mpu timer" - help - Select this option if you want to use the OMAP mpu timer. This - timer provides more intra-tick resolution than the 32KHz timer, - but consumes more power. - -config OMAP_32K_TIMER - bool "Use 32KHz timer" - depends on ARCH_OMAP16XX - help - Select this option if you want to enable the OMAP 32KHz timer. - This timer saves power compared to the OMAP_MPU_TIMER, and has - support for no tick during idle. The 32KHz timer provides less - intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is - currently only available for OMAP-16xx. - -endchoice - -config OMAP_32K_TIMER_HZ - int "Kernel internal timer frequency for 32KHz timer" - range 32 1024 - depends on OMAP_32K_TIMER - default "128" - help - Kernel internal timer frequency should be a divisor of 32768, - such as 64 or 128. - -choice - prompt "Low-level debug console UART" - depends on ARCH_OMAP - default OMAP_LL_DEBUG_UART1 - -config OMAP_LL_DEBUG_UART1 - bool "UART1" - -config OMAP_LL_DEBUG_UART2 - bool "UART2" - -config OMAP_LL_DEBUG_UART3 - bool "UART3" - -endchoice - -config OMAP_ARM_195MHZ - bool "OMAP ARM 195 MHz CPU" - depends on ARCH_OMAP730 - help - Enable 195MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_192MHZ - bool "OMAP ARM 192 MHz CPU" - depends on ARCH_OMAP16XX - help - Enable 192MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_182MHZ - bool "OMAP ARM 182 MHz CPU" - depends on ARCH_OMAP730 - help - Enable 182MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_168MHZ - bool "OMAP ARM 168 MHz CPU" - depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730 - help - Enable 168MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_120MHZ - bool "OMAP ARM 120 MHz CPU" - depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730 - help - Enable 120MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_60MHZ - bool "OMAP ARM 60 MHz CPU" - depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730 - default y - help - Enable 60MHz clock for OMAP CPU. If unsure, say Y. - -config OMAP_ARM_30MHZ - bool "OMAP ARM 30 MHz CPU" - depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730 - help - Enable 30MHz clock for OMAP CPU. If unsure, say N. - -endmenu - -endif diff --git a/arch/arm/mach-omap/Makefile b/arch/arm/mach-omap/Makefile deleted file mode 100644 index 4cafb11d2c02..000000000000 --- a/arch/arm/mach-omap/Makefile +++ /dev/null @@ -1,40 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Common support -obj-y := common.o time.o irq.o dma.o clock.o mux.o gpio.o mcbsp.o usb.o -obj-m := -obj-n := -obj- := -led-y := leds.o - -# Specific board support -obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o -obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o -obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o -obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o -obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o -obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o -obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o -obj-$(CONFIG_MACH_NETSTAR) += board-netstar.o - -# OCPI interconnect support for 1710, 1610 and 5912 -obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o - -# LEDs support -led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o -led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o -led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o -obj-$(CONFIG_LEDS) += $(led-y) - -# Power Management -obj-$(CONFIG_PM) += pm.o sleep.o - -ifeq ($(CONFIG_ARCH_OMAP1510),y) -# Innovator-1510 FPGA -obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o -endif - -# kgdb support -obj-$(CONFIG_KGDB_SERIAL) += kgdb-serial.o diff --git a/arch/arm/mach-omap/common.c b/arch/arm/mach-omap/common.c deleted file mode 100644 index 265cde48586f..000000000000 --- a/arch/arm/mach-omap/common.c +++ /dev/null @@ -1,549 +0,0 @@ -/* - * linux/arch/arm/mach-omap/common.c - * - * Code common to all OMAP machines. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/config.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/pm.h> -#include <linux/console.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_8250.h> -#include <linux/serial_reg.h> - -#include <asm/hardware.h> -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/mach/map.h> -#include <asm/hardware/clock.h> -#include <asm/io.h> -#include <asm/mach-types.h> - -#include <asm/arch/board.h> -#include <asm/arch/mux.h> -#include <asm/arch/fpga.h> - -#include "clock.h" - -#define DEBUG 1 - -struct omap_id { - u16 jtag_id; /* Used to determine OMAP type */ - u8 die_rev; /* Processor revision */ - u32 omap_id; /* OMAP revision */ - u32 type; /* Cpu id bits [31:08], cpu class bits [07:00] */ -}; - -/* Register values to detect the OMAP version */ -static struct omap_id omap_ids[] __initdata = { - { .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100}, - { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300}, - { .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000}, - { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000}, - { .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000}, - { .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type = 0x16100c00}, - { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type = 0x16100d00}, - { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00}, - { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00}, - { .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type = 0x16110000}, - { .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type = 0x16110b00}, - { .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type = 0x16110c00}, - { .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type = 0x16212300}, - { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type = 0x16212300}, - { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x16212300}, - { .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type = 0x17100000}, - { .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type = 0x17100000}, - { .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000}, -}; - -/* - * Get OMAP type from PROD_ID. - * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM. - * 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense. - * Undocumented register in TEST BLOCK is used as fallback; This seems to - * work on 1510, 1610 & 1710. The official way hopefully will work in future - * processors. - */ -static u16 __init omap_get_jtag_id(void) -{ - u32 prod_id, omap_id; - - prod_id = omap_readl(OMAP_PRODUCTION_ID_1); - omap_id = omap_readl(OMAP32_ID_1); - - /* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */ - if (((prod_id >> 20) == 0) || (prod_id == omap_id)) - prod_id = 0; - else - prod_id &= 0xffff; - - if (prod_id) - return prod_id; - - /* Use OMAP32_ID_1 as fallback */ - prod_id = ((omap_id >> 12) & 0xffff); - - return prod_id; -} - -/* - * Get OMAP revision from DIE_REV. - * Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID. - * Undocumented register in the TEST BLOCK is used as fallback. - * REVISIT: This does not seem to work on 1510 - */ -static u8 __init omap_get_die_rev(void) -{ - u32 die_rev; - - die_rev = omap_readl(OMAP_DIE_ID_1); - - /* Check for broken OMAP_DIE_ID on early 1710 */ - if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id()) - die_rev = 0; - - die_rev = (die_rev >> 17) & 0xf; - if (die_rev) - return die_rev; - - die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf; - - return die_rev; -} - -static void __init omap_check_revision(void) -{ - int i; - u16 jtag_id; - u8 die_rev; - u32 omap_id; - u8 cpu_type; - - jtag_id = omap_get_jtag_id(); - die_rev = omap_get_die_rev(); - omap_id = omap_readl(OMAP32_ID_0); - -#ifdef DEBUG - printk("OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0)); - printk("OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n", - omap_readl(OMAP_DIE_ID_1), - (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf); - printk("OMAP_PRODUCTION_ID_0: 0x%08x\n", omap_readl(OMAP_PRODUCTION_ID_0)); - printk("OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n", - omap_readl(OMAP_PRODUCTION_ID_1), - omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff); - printk("OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0)); - printk("OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1)); - printk("JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev); -#endif - - system_serial_high = omap_readl(OMAP_DIE_ID_0); - system_serial_low = omap_readl(OMAP_DIE_ID_1); - - /* First check only the major version in a safe way */ - for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { - if (jtag_id == (omap_ids[i].jtag_id)) { - system_rev = omap_ids[i].type; - break; - } - } - - /* Check if we can find the die revision */ - for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { - if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) { - system_rev = omap_ids[i].type; - break; - } - } - - /* Finally check also the omap_id */ - for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { - if (jtag_id == omap_ids[i].jtag_id - && die_rev == omap_ids[i].die_rev - && omap_id == omap_ids[i].omap_id) { - system_rev = omap_ids[i].type; - break; - } - } - - /* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */ - cpu_type = system_rev >> 24; - - switch (cpu_type) { - case 0x07: - system_rev |= 0x07; - break; - case 0x15: - system_rev |= 0x15; - break; - case 0x16: - case 0x17: - system_rev |= 0x16; - break; - case 0x24: - system_rev |= 0x24; - break; - default: - printk("Unknown OMAP cpu type: 0x%02x\n", cpu_type); - } - - printk("OMAP%04x", system_rev >> 16); - if ((system_rev >> 8) & 0xff) - printk("%x", (system_rev >> 8) & 0xff); - printk(" revision %i handled as %02xxx id: %08x%08x\n", - die_rev, system_rev & 0xff, system_serial_low, - system_serial_high); -} - -/* - * ---------------------------------------------------------------------------- - * OMAP I/O mapping - * - * The machine specific code may provide the extra mapping besides the - * default mapping provided here. - * ---------------------------------------------------------------------------- - */ - -static struct map_desc omap_io_desc[] __initdata = { - { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE }, -}; - -#ifdef CONFIG_ARCH_OMAP730 -static struct map_desc omap730_io_desc[] __initdata = { - { OMAP730_DSP_BASE, OMAP730_DSP_START, OMAP730_DSP_SIZE, MT_DEVICE }, - { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE }, - { OMAP730_SRAM_BASE, OMAP730_SRAM_START, OMAP730_SRAM_SIZE, MT_DEVICE } -}; -#endif - -#ifdef CONFIG_ARCH_OMAP1510 -static struct map_desc omap1510_io_desc[] __initdata = { - { OMAP1510_DSP_BASE, OMAP1510_DSP_START, OMAP1510_DSP_SIZE, MT_DEVICE }, - { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE }, - { OMAP1510_SRAM_BASE, OMAP1510_SRAM_START, OMAP1510_SRAM_SIZE, MT_DEVICE } -}; -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -static struct map_desc omap1610_io_desc[] __initdata = { - { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE }, - { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE }, - { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP1610_SRAM_SIZE, MT_DEVICE } -}; - -static struct map_desc omap5912_io_desc[] __initdata = { - { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE }, - { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE }, -/* - * The OMAP5912 has 250kByte internal SRAM. Because the mapping is baseed on page - * size (4kByte), it seems that the last 2kByte (=0x800) of the 250kByte are not mapped. - * Add additional 2kByte (0x800) so that the last page is mapped and the last 2kByte - * can be used. - */ - { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP5912_SRAM_SIZE + 0x800, MT_DEVICE } -}; -#endif - -static int initialized = 0; - -static void __init _omap_map_io(void) -{ - initialized = 1; - - /* We have to initialize the IO space mapping before we can run - * cpu_is_omapxxx() macros. */ - iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc)); - omap_check_revision(); - -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { - iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc)); - } -#endif -#ifdef CONFIG_ARCH_OMAP1510 - if (cpu_is_omap1510()) { - iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); - } -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (cpu_is_omap1610() || cpu_is_omap1710()) { - iotable_init(omap1610_io_desc, ARRAY_SIZE(omap1610_io_desc)); - } - if (cpu_is_omap5912()) { - iotable_init(omap5912_io_desc, ARRAY_SIZE(omap5912_io_desc)); - } -#endif - - /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort - * on a Posted Write in the TIPB Bridge". - */ - omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL); - omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL); - - /* Must init clocks early to assure that timer interrupt works - */ - clk_init(); -} - -/* - * This should only get called from board specific init - */ -void omap_map_io(void) -{ - if (!initialized) - _omap_map_io(); -} - -static inline unsigned int omap_serial_in(struct plat_serial8250_port *up, - int offset) -{ - offset <<= up->regshift; - return (unsigned int)__raw_readb(up->membase + offset); -} - -static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset, - int value) -{ - offset <<= p->regshift; - __raw_writeb(value, p->membase + offset); -} - -/* - * Internal UARTs need to be initialized for the 8250 autoconfig to work - * properly. Note that the TX watermark initialization may not be needed - * once the 8250.c watermark handling code is merged. - */ -static void __init omap_serial_reset(struct plat_serial8250_port *p) -{ - omap_serial_outp(p, UART_OMAP_MDR1, 0x07); /* disable UART */ - omap_serial_outp(p, UART_OMAP_SCR, 0x08); /* TX watermark */ - omap_serial_outp(p, UART_OMAP_MDR1, 0x00); /* enable UART */ - - if (!cpu_is_omap1510()) { - omap_serial_outp(p, UART_OMAP_SYSC, 0x01); - while (!(omap_serial_in(p, UART_OMAP_SYSC) & 0x01)); - } -} - -static struct plat_serial8250_port serial_platform_data[] = { - { - .membase = (char*)IO_ADDRESS(OMAP_UART1_BASE), - .mapbase = (unsigned long)OMAP_UART1_BASE, - .irq = INT_UART1, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP16XX_BASE_BAUD * 16, - }, - { - .membase = (char*)IO_ADDRESS(OMAP_UART2_BASE), - .mapbase = (unsigned long)OMAP_UART2_BASE, - .irq = INT_UART2, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP16XX_BASE_BAUD * 16, - }, - { - .membase = (char*)IO_ADDRESS(OMAP_UART3_BASE), - .mapbase = (unsigned long)OMAP_UART3_BASE, - .irq = INT_UART3, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP16XX_BASE_BAUD * 16, - }, - { }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -/* - * Note that on Innovator-1510 UART2 pins conflict with USB2. - * By default UART2 does not work on Innovator-1510 if you have - * USB OHCI enabled. To use UART2, you must disable USB2 first. - */ -void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS]) -{ - int i; - - if (cpu_is_omap730()) { - serial_platform_data[0].regshift = 0; - serial_platform_data[1].regshift = 0; - serial_platform_data[0].irq = INT_730_UART_MODEM_1; - serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2; - } - - if (cpu_is_omap1510()) { - serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16; - serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16; - serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16; - } - - for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - unsigned char reg; - - if (ports[i] == 0) { - serial_platform_data[i].membase = 0; - serial_platform_data[i].mapbase = 0; - continue; - } - - switch (i) { - case 0: - if (cpu_is_omap1510()) { - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - if (machine_is_omap_innovator()) { - reg = fpga_read(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM1_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); - udelay(10); - } - } - break; - case 1: - if (cpu_is_omap1510()) { - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - if (machine_is_omap_innovator()) { - reg = fpga_read(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM2_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); - udelay(10); - } - } - break; - case 2: - if (cpu_is_omap1510()) { - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - } - if (cpu_is_omap1710()) { - clk_enable(clk_get(0, "uart3_ck")); - } - break; - } - omap_serial_reset(&serial_platform_data[i]); - } -} - -static int __init omap_init(void) -{ - return platform_device_register(&serial_device); -} -arch_initcall(omap_init); - -#define NO_LENGTH_CHECK 0xffffffff - -extern int omap_bootloader_tag_len; -extern u8 omap_bootloader_tag[]; - -struct omap_board_config_kernel *omap_board_config; -int omap_board_config_size = 0; - -static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out) -{ - struct omap_board_config_kernel *kinfo = NULL; - int i; - -#ifdef CONFIG_OMAP_BOOT_TAG - struct omap_board_config_entry *info = NULL; - - if (omap_bootloader_tag_len > 4) - info = (struct omap_board_config_entry *) omap_bootloader_tag; - while (info != NULL) { - u8 *next; - - if (info->tag == tag) { - if (skip == 0) - break; - skip--; - } - - if ((info->len & 0x03) != 0) { - /* We bail out to avoid an alignment fault */ - printk(KERN_ERR "OMAP peripheral config: Length (%d) not word-aligned (tag %04x)\n", - info->len, info->tag); - return NULL; - } - next = (u8 *) info + sizeof(*info) + info->len; - if (next >= omap_bootloader_tag + omap_bootloader_tag_len) - info = NULL; - else - info = (struct omap_board_config_entry *) next; - } - if (info != NULL) { - /* Check the length as a lame attempt to check for - * binary inconsistancy. */ - if (len != NO_LENGTH_CHECK) { - /* Word-align len */ - if (len & 0x03) - len = (len + 3) & ~0x03; - if (info->len != len) { - printk(KERN_ERR "OMAP peripheral config: Length mismatch with tag %x (want %d, got %d)\n", - tag, len, info->len); - return NULL; - } - } - if (len_out != NULL) - *len_out = info->len; - return info->data; - } -#endif - /* Try to find the config from the board-specific structures - * in the kernel. */ - for (i = 0; i < omap_board_config_size; i++) { - if (omap_board_config[i].tag == tag) { - kinfo = &omap_board_config[i]; - break; - } - } - if (kinfo == NULL) - return NULL; - return kinfo->data; -} - -const void *__omap_get_config(u16 tag, size_t len, int nr) -{ - return get_config(tag, len, nr, NULL); -} -EXPORT_SYMBOL(__omap_get_config); - -const void *omap_get_var_config(u16 tag, size_t *len) -{ - return get_config(tag, NO_LENGTH_CHECK, 0, len); -} -EXPORT_SYMBOL(omap_get_var_config); - -static int __init omap_add_serial_console(void) -{ - const struct omap_uart_config *info; - - info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config); - if (info != NULL && info->console_uart) { - static char speed[11], *opt = NULL; - - if (info->console_speed) { - snprintf(speed, sizeof(speed), "%u", info->console_speed); - opt = speed; - } - return add_preferred_console("ttyS", info->console_uart - 1, opt); - } - return 0; -} -console_initcall(omap_add_serial_console); diff --git a/arch/arm/mach-omap/common.h b/arch/arm/mach-omap/common.h deleted file mode 100644 index 9f62858c0df4..000000000000 --- a/arch/arm/mach-omap/common.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/arch/arm/mach-omap/common.h - * - * Header for code common to all OMAP machines. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H -#define __ARCH_ARM_MACH_OMAP_COMMON_H - -struct sys_timer; - -extern void omap_map_io(void); -extern struct sys_timer omap_timer; -extern void omap_serial_init(int ports[]); - -#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig new file mode 100644 index 000000000000..7408ac94f771 --- /dev/null +++ b/arch/arm/mach-omap1/Kconfig @@ -0,0 +1,144 @@ +comment "OMAP Core Type" + depends on ARCH_OMAP1 + +config ARCH_OMAP730 + depends on ARCH_OMAP1 + bool "OMAP730 Based System" + select ARCH_OMAP_OTG + +config ARCH_OMAP1510 + depends on ARCH_OMAP1 + default y + bool "OMAP1510 Based System" + +config ARCH_OMAP16XX + depends on ARCH_OMAP1 + bool "OMAP16xx Based System" + select ARCH_OMAP_OTG + +comment "OMAP Board Type" + depends on ARCH_OMAP1 + +config MACH_OMAP_INNOVATOR + bool "TI Innovator" + depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX) + help + TI OMAP 1510 or 1610 Innovator board support. Say Y here if you + have such a board. + +config MACH_OMAP_H2 + bool "TI H2 Support" + depends on ARCH_OMAP1 && ARCH_OMAP16XX + help + TI OMAP 1610/1611B H2 board support. Say Y here if you have such + a board. + +config MACH_OMAP_H3 + bool "TI H3 Support" + depends on ARCH_OMAP1 && ARCH_OMAP16XX + help + TI OMAP 1710 H3 board support. Say Y here if you have such + a board. + +config MACH_OMAP_OSK + bool "TI OSK Support" + depends on ARCH_OMAP1 && ARCH_OMAP16XX + help + TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here + if you have such a board. + +config MACH_OMAP_PERSEUS2 + bool "TI Perseus2" + depends on ARCH_OMAP1 && ARCH_OMAP730 + help + Support for TI OMAP 730 Perseus2 board. Say Y here if you have such + a board. + +config MACH_VOICEBLUE + bool "Voiceblue" + depends on ARCH_OMAP1 && ARCH_OMAP1510 + help + Support for Voiceblue GSM/VoIP gateway. Say Y here if you have + such a board. + +config MACH_NETSTAR + bool "NetStar" + depends on ARCH_OMAP1 && ARCH_OMAP1510 + help + Support for NetStar PBX. Say Y here if you have such a board. + +config MACH_OMAP_GENERIC + bool "Generic OMAP board" + depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX) + help + Support for generic OMAP-1510, 1610 or 1710 board with + no FPGA. Can be used as template for porting Linux to + custom OMAP boards. Say Y here if you have a custom + board. + +comment "OMAP CPU Speed" + depends on ARCH_OMAP1 + +config OMAP_CLOCKS_SET_BY_BOOTLOADER + bool "OMAP clocks set by bootloader" + depends on ARCH_OMAP1 + help + Enable this option to prevent the kernel from overriding the clock + frequencies programmed by bootloader for MPU, DSP, MMUs, TC, + internal LCD controller and MPU peripherals. + +config OMAP_ARM_216MHZ + bool "OMAP ARM 216 MHz CPU (1710 only)" + depends on ARCH_OMAP1 && ARCH_OMAP16XX + help + Enable 216 MHz clock for OMAP1710 CPU. If unsure, say N. + +config OMAP_ARM_195MHZ + bool "OMAP ARM 195 MHz CPU" + depends on ARCH_OMAP1 && ARCH_OMAP730 + help + Enable 195MHz clock for OMAP CPU. If unsure, say N. + +config OMAP_ARM_192MHZ + bool "OMAP ARM 192 MHz CPU" + depends on ARCH_OMAP1 && ARCH_OMAP16XX + help + Enable 192MHz clock for OMAP CPU. If unsure, say N. + +config OMAP_ARM_182MHZ + bool "OMAP ARM 182 MHz CPU" + depends on ARCH_OMAP1 && ARCH_OMAP730 + help + Enable 182MHz clock for OMAP CPU. If unsure, say N. + +config OMAP_ARM_168MHZ + bool "OMAP ARM 168 MHz CPU" + depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + help + Enable 168MHz clock for OMAP CPU. If unsure, say N. + +config OMAP_ARM_150MHZ + bool "OMAP ARM 150 MHz CPU" + depends on ARCH_OMAP1 && ARCH_OMAP1510 + help + Enable 150MHz clock for OMAP CPU. If unsure, say N. + +config OMAP_ARM_120MHZ + bool "OMAP ARM 120 MHz CPU" + depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + help + Enable 120MHz clock for OMAP CPU. If unsure, say N. + +config OMAP_ARM_60MHZ + bool "OMAP ARM 60 MHz CPU" + depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + default y + help + Enable 60MHz clock for OMAP CPU. If unsure, say Y. + +config OMAP_ARM_30MHZ + bool "OMAP ARM 30 MHz CPU" + depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + help + Enable 30MHz clock for OMAP CPU. If unsure, say N. + diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile new file mode 100644 index 000000000000..d386fd913f0c --- /dev/null +++ b/arch/arm/mach-omap1/Makefile @@ -0,0 +1,30 @@ +# +# Makefile for the linux kernel. +# + +# Common support +obj-y := io.o id.o irq.o time.o serial.o +led-y := leds.o + +# Specific board support +obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o +obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o +obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o +obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o +obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o +obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o +obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o +obj-$(CONFIG_MACH_NETSTAR) += board-netstar.o + +ifeq ($(CONFIG_ARCH_OMAP1510),y) +# Innovator-1510 FPGA +obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o +endif + +# LEDs support +led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o +led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o +led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o +led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o +obj-$(CONFIG_LEDS) += $(led-y) + diff --git a/arch/arm/mach-omap/Makefile.boot b/arch/arm/mach-omap1/Makefile.boot index fee1a6a15b54..292d56c5a888 100644 --- a/arch/arm/mach-omap/Makefile.boot +++ b/arch/arm/mach-omap1/Makefile.boot @@ -1,4 +1,3 @@ zreladdr-y := 0x10008000 params_phys-y := 0x10000100 initrd_phys-y := 0x10800000 - diff --git a/arch/arm/mach-omap/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 2102a2cd1013..122796ebe8f5 100644 --- a/arch/arm/mach-omap/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/board-generic.c + * linux/arch/arm/mach-omap1/board-generic.c * * Modified from board-innovator1510.c * @@ -26,8 +26,7 @@ #include <asm/arch/mux.h> #include <asm/arch/usb.h> #include <asm/arch/board.h> - -#include "common.h" +#include <asm/arch/common.h> static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; @@ -84,15 +83,17 @@ static void __init omap_generic_init(void) static void __init omap_generic_map_io(void) { - omap_map_io(); + omap_map_common_io() } MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") - MAINTAINER("Tony Lindgren <tony@atomide.com>") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(omap_generic_map_io) - INITIRQ(omap_generic_init_irq) - INIT_MACHINE(omap_generic_init) + /* Maintainer: Tony Lindgren <tony@atomide.com> */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_generic_map_io, + .init_irq = omap_generic_init_irq, + .init_machine = omap_generic_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 1f067830d1fc..f4983ee95ab4 100644 --- a/arch/arm/mach-omap/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/board-h2.c + * linux/arch/arm/mach-omap1/board-h2.c * * Board specific inits for OMAP-1610 H2 * @@ -35,8 +35,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/tc.h> #include <asm/arch/usb.h> - -#include "common.h" +#include <asm/arch/common.h> extern int omap_gpio_init(void); @@ -172,16 +171,18 @@ static void __init h2_init(void) static void __init h2_map_io(void) { - omap_map_io(); + omap_map_common_io(); omap_serial_init(h2_serial_ports); } MACHINE_START(OMAP_H2, "TI-H2") - MAINTAINER("Imre Deak <imre.deak@nokia.com>") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(h2_map_io) - INITIRQ(h2_init_irq) - INIT_MACHINE(h2_init) + /* Maintainer: Imre Deak <imre.deak@nokia.com> */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = h2_map_io, + .init_irq = h2_init_irq, + .init_machine = h2_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 486a5a006c9a..7cd419d61b40 100644 --- a/arch/arm/mach-omap/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/board-h3.c + * linux/arch/arm/mach-omap1/board-h3.c * * This file contains OMAP1710 H3 specific code. * @@ -37,8 +37,7 @@ #include <asm/arch/mux.h> #include <asm/arch/tc.h> #include <asm/arch/usb.h> - -#include "common.h" +#include <asm/arch/common.h> extern int omap_gpio_init(void); @@ -190,16 +189,18 @@ void h3_init_irq(void) static void __init h3_map_io(void) { - omap_map_io(); + omap_map_common_io(); omap_serial_init(h3_serial_ports); } MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") - MAINTAINER("Texas Instruments, Inc.") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(h3_map_io) - INITIRQ(h3_init_irq) - INIT_MACHINE(h3_init) + /* Maintainer: Texas Instruments, Inc. */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = h3_map_io, + .init_irq = h3_init_irq, + .init_machine = h3_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 57cf4da88d55..91de60a91ef8 100644 --- a/arch/arm/mach-omap/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/board-innovator.c + * linux/arch/arm/mach-omap1/board-innovator.c * * Board specific inits for OMAP-1510 and OMAP-1610 Innovator * @@ -33,8 +33,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/tc.h> #include <asm/arch/usb.h> - -#include "common.h" +#include <asm/arch/common.h> static int __initdata innovator_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; @@ -252,7 +251,7 @@ static void __init innovator_init(void) static void __init innovator_map_io(void) { - omap_map_io(); + omap_map_common_io(); #ifdef CONFIG_ARCH_OMAP1510 if (cpu_is_omap1510()) { @@ -270,11 +269,13 @@ static void __init innovator_map_io(void) } MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(innovator_map_io) - INITIRQ(innovator_init_irq) - INIT_MACHINE(innovator_init) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = innovator_map_io, + .init_irq = innovator_init_irq, + .init_machine = innovator_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c index 54acbd215c4b..6750b2014092 100644 --- a/arch/arm/mach-omap/board-netstar.c +++ b/arch/arm/mach-omap1/board-netstar.c @@ -26,8 +26,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/mux.h> #include <asm/arch/usb.h> - -#include "common.h" +#include <asm/arch/common.h> extern void __init omap_init_time(void); extern int omap_gpio_init(void); @@ -100,7 +99,7 @@ static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; static void __init netstar_map_io(void) { - omap_map_io(); + omap_map_common_io(); omap_serial_init(omap_serial_ports); } @@ -141,11 +140,13 @@ static int __init netstar_late_init(void) postcore_initcall(netstar_late_init); MACHINE_START(NETSTAR, "NetStar OMAP5910") - MAINTAINER("Ladislav Michl <michl@2n.cz>") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(netstar_map_io) - INITIRQ(netstar_init_irq) - INIT_MACHINE(netstar_init) - .timer = &omap_timer, + /* Maintainer: Ladislav Michl <michl@2n.cz> */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = netstar_map_io, + .init_irq = netstar_init_irq, + .init_machine = netstar_init, + .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-osk.c b/arch/arm/mach-omap1/board-osk.c index a951fc82459b..6844e536c698 100644 --- a/arch/arm/mach-omap/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/board-osk.c + * linux/arch/arm/mach-omap1/board-osk.c * * Board specific init for OMAP5912 OSK * @@ -39,8 +39,7 @@ #include <asm/arch/usb.h> #include <asm/arch/mux.h> #include <asm/arch/tc.h> - -#include "common.h" +#include <asm/arch/common.h> static struct map_desc osk5912_io_desc[] __initdata = { { OMAP_OSK_NOR_FLASH_BASE, OMAP_OSK_NOR_FLASH_START, OMAP_OSK_NOR_FLASH_SIZE, @@ -153,17 +152,19 @@ static void __init osk_init(void) static void __init osk_map_io(void) { - omap_map_io(); + omap_map_common_io(); iotable_init(osk5912_io_desc, ARRAY_SIZE(osk5912_io_desc)); omap_serial_init(osk_serial_ports); } MACHINE_START(OMAP_OSK, "TI-OSK") - MAINTAINER("Dirk Behme <dirk.behme@de.bosch.com>") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(osk_map_io) - INITIRQ(osk_init_irq) - INIT_MACHINE(osk_init) + /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = osk_map_io, + .init_irq = osk_init_irq, + .init_machine = osk_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 64515aeb49cf..213317392d9b 100644 --- a/arch/arm/mach-omap/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/board-perseus2.c + * linux/arch/arm/mach-omap1/board-perseus2.c * * Modified from board-generic.c * @@ -27,8 +27,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/mux.h> #include <asm/arch/fpga.h> - -#include "common.h" +#include <asm/arch/common.h> static struct resource smc91x_resources[] = { [0] = { @@ -140,7 +139,7 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = { static void __init omap_perseus2_map_io(void) { - omap_map_io(); + omap_map_common_io(); iotable_init(omap_perseus2_io_desc, ARRAY_SIZE(omap_perseus2_io_desc)); @@ -179,11 +178,13 @@ static void __init omap_perseus2_map_io(void) } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") - MAINTAINER("Kevin Hilman <kjh@hilman.org>") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(omap_perseus2_map_io) - INITIRQ(omap_perseus2_init_irq) - INIT_MACHINE(omap_perseus2_init) + /* Maintainer: Kevin Hilman <kjh@hilman.org> */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_perseus2_map_io, + .init_irq = omap_perseus2_init_irq, + .init_machine = omap_perseus2_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index f1a5bffac666..e42281988990 100644 --- a/arch/arm/mach-omap/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/board-voiceblue.c + * linux/arch/arm/mach-omap1/board-voiceblue.c * * Modified from board-generic.c * @@ -31,8 +31,7 @@ #include <asm/arch/tc.h> #include <asm/arch/mux.h> #include <asm/arch/usb.h> - -#include "common.h" +#include <asm/arch/common.h> extern void omap_init_time(void); extern int omap_gpio_init(void); @@ -170,7 +169,7 @@ static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; static void __init voiceblue_map_io(void) { - omap_map_io(); + omap_map_common_io(); omap_serial_init(omap_serial_ports); } @@ -246,11 +245,13 @@ EXPORT_SYMBOL(voiceblue_wdt_disable); EXPORT_SYMBOL(voiceblue_wdt_ping); MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") - MAINTAINER("Ladislav Michl <michl@2n.cz>") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(voiceblue_map_io) - INITIRQ(voiceblue_init_irq) - INIT_MACHINE(voiceblue_init) - .timer = &omap_timer, + /* Maintainer: Ladislav Michl <michl@2n.cz> */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = voiceblue_map_io, + .init_irq = voiceblue_init_irq, + .init_machine = voiceblue_init, + .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/fpga.c b/arch/arm/mach-omap1/fpga.c index 7c08f6c2e1d0..7c08f6c2e1d0 100644 --- a/arch/arm/mach-omap/fpga.c +++ b/arch/arm/mach-omap1/fpga.c diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c new file mode 100644 index 000000000000..986c3b7e09bb --- /dev/null +++ b/arch/arm/mach-omap1/id.c @@ -0,0 +1,188 @@ +/* + * linux/arch/arm/mach-omap1/id.c + * + * OMAP1 CPU identification code + * + * Copyright (C) 2004 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/io.h> + +struct omap_id { + u16 jtag_id; /* Used to determine OMAP type */ + u8 die_rev; /* Processor revision */ + u32 omap_id; /* OMAP revision */ + u32 type; /* Cpu id bits [31:08], cpu class bits [07:00] */ +}; + +/* Register values to detect the OMAP version */ +static struct omap_id omap_ids[] __initdata = { + { .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100}, + { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300}, + { .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000}, + { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000}, + { .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000}, + { .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type = 0x16100c00}, + { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type = 0x16100d00}, + { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00}, + { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00}, + { .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type = 0x16110000}, + { .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type = 0x16110b00}, + { .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type = 0x16110c00}, + { .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type = 0x16212300}, + { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type = 0x16212300}, + { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x16212300}, + { .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type = 0x17100000}, + { .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type = 0x17100000}, + { .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000}, +}; + +/* + * Get OMAP type from PROD_ID. + * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM. + * 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense. + * Undocumented register in TEST BLOCK is used as fallback; This seems to + * work on 1510, 1610 & 1710. The official way hopefully will work in future + * processors. + */ +static u16 __init omap_get_jtag_id(void) +{ + u32 prod_id, omap_id; + + prod_id = omap_readl(OMAP_PRODUCTION_ID_1); + omap_id = omap_readl(OMAP32_ID_1); + + /* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */ + if (((prod_id >> 20) == 0) || (prod_id == omap_id)) + prod_id = 0; + else + prod_id &= 0xffff; + + if (prod_id) + return prod_id; + + /* Use OMAP32_ID_1 as fallback */ + prod_id = ((omap_id >> 12) & 0xffff); + + return prod_id; +} + +/* + * Get OMAP revision from DIE_REV. + * Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID. + * Undocumented register in the TEST BLOCK is used as fallback. + * REVISIT: This does not seem to work on 1510 + */ +static u8 __init omap_get_die_rev(void) +{ + u32 die_rev; + + die_rev = omap_readl(OMAP_DIE_ID_1); + + /* Check for broken OMAP_DIE_ID on early 1710 */ + if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id()) + die_rev = 0; + + die_rev = (die_rev >> 17) & 0xf; + if (die_rev) + return die_rev; + + die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf; + + return die_rev; +} + +void __init omap_check_revision(void) +{ + int i; + u16 jtag_id; + u8 die_rev; + u32 omap_id; + u8 cpu_type; + + jtag_id = omap_get_jtag_id(); + die_rev = omap_get_die_rev(); + omap_id = omap_readl(OMAP32_ID_0); + +#ifdef DEBUG + printk("OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0)); + printk("OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n", + omap_readl(OMAP_DIE_ID_1), + (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf); + printk("OMAP_PRODUCTION_ID_0: 0x%08x\n", omap_readl(OMAP_PRODUCTION_ID_0)); + printk("OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n", + omap_readl(OMAP_PRODUCTION_ID_1), + omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff); + printk("OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0)); + printk("OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1)); + printk("JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev); +#endif + + system_serial_high = omap_readl(OMAP_DIE_ID_0); + system_serial_low = omap_readl(OMAP_DIE_ID_1); + + /* First check only the major version in a safe way */ + for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { + if (jtag_id == (omap_ids[i].jtag_id)) { + system_rev = omap_ids[i].type; + break; + } + } + + /* Check if we can find the die revision */ + for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { + if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) { + system_rev = omap_ids[i].type; + break; + } + } + + /* Finally check also the omap_id */ + for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { + if (jtag_id == omap_ids[i].jtag_id + && die_rev == omap_ids[i].die_rev + && omap_id == omap_ids[i].omap_id) { + system_rev = omap_ids[i].type; + break; + } + } + + /* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */ + cpu_type = system_rev >> 24; + + switch (cpu_type) { + case 0x07: + system_rev |= 0x07; + break; + case 0x15: + system_rev |= 0x15; + break; + case 0x16: + case 0x17: + system_rev |= 0x16; + break; + case 0x24: + system_rev |= 0x24; + break; + default: + printk("Unknown OMAP cpu type: 0x%02x\n", cpu_type); + } + + printk("OMAP%04x", system_rev >> 16); + if ((system_rev >> 8) & 0xff) + printk("%x", (system_rev >> 8) & 0xff); + printk(" revision %i handled as %02xxx id: %08x%08x\n", + die_rev, system_rev & 0xff, system_serial_low, + system_serial_high); +} + diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c new file mode 100644 index 000000000000..207df0fe934d --- /dev/null +++ b/arch/arm/mach-omap1/io.c @@ -0,0 +1,115 @@ +/* + * linux/arch/arm/mach-omap1/io.c + * + * OMAP1 I/O mapping code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/mach/map.h> +#include <asm/io.h> +#include <asm/arch/tc.h> + +extern int clk_init(void); +extern void omap_check_revision(void); + +/* + * The machine specific code may provide the extra mapping besides the + * default mapping provided here. + */ +static struct map_desc omap_io_desc[] __initdata = { + { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE }, +}; + +#ifdef CONFIG_ARCH_OMAP730 +static struct map_desc omap730_io_desc[] __initdata = { + { OMAP730_DSP_BASE, OMAP730_DSP_START, OMAP730_DSP_SIZE, MT_DEVICE }, + { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE }, + { OMAP730_SRAM_BASE, OMAP730_SRAM_START, OMAP730_SRAM_SIZE, MT_DEVICE } +}; +#endif + +#ifdef CONFIG_ARCH_OMAP1510 +static struct map_desc omap1510_io_desc[] __initdata = { + { OMAP1510_DSP_BASE, OMAP1510_DSP_START, OMAP1510_DSP_SIZE, MT_DEVICE }, + { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE }, + { OMAP1510_SRAM_BASE, OMAP1510_SRAM_START, OMAP1510_SRAM_SIZE, MT_DEVICE } +}; +#endif + +#if defined(CONFIG_ARCH_OMAP16XX) +static struct map_desc omap1610_io_desc[] __initdata = { + { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE }, + { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE }, + { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP1610_SRAM_SIZE, MT_DEVICE } +}; + +static struct map_desc omap5912_io_desc[] __initdata = { + { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE }, + { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE }, +/* + * The OMAP5912 has 250kByte internal SRAM. Because the mapping is baseed on page + * size (4kByte), it seems that the last 2kByte (=0x800) of the 250kByte are not mapped. + * Add additional 2kByte (0x800) so that the last page is mapped and the last 2kByte + * can be used. + */ + { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP5912_SRAM_SIZE + 0x800, MT_DEVICE } +}; +#endif + +static int initialized = 0; + +static void __init _omap_map_io(void) +{ + initialized = 1; + + /* We have to initialize the IO space mapping before we can run + * cpu_is_omapxxx() macros. */ + iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc)); + omap_check_revision(); + +#ifdef CONFIG_ARCH_OMAP730 + if (cpu_is_omap730()) { + iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc)); + } +#endif +#ifdef CONFIG_ARCH_OMAP1510 + if (cpu_is_omap1510()) { + iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); + } +#endif +#if defined(CONFIG_ARCH_OMAP16XX) + if (cpu_is_omap1610() || cpu_is_omap1710()) { + iotable_init(omap1610_io_desc, ARRAY_SIZE(omap1610_io_desc)); + } + if (cpu_is_omap5912()) { + iotable_init(omap5912_io_desc, ARRAY_SIZE(omap5912_io_desc)); + } +#endif + + /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort + * on a Posted Write in the TIPB Bridge". + */ + omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL); + omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL); + + /* Must init clocks early to assure that timer interrupt works + */ + clk_init(); +} + +/* + * This should only get called from board specific init + */ +void omap_map_common_io(void) +{ + if (!initialized) + _omap_map_io(); +} diff --git a/arch/arm/mach-omap/irq.c b/arch/arm/mach-omap1/irq.c index f01c99266a86..a11b6d807352 100644 --- a/arch/arm/mach-omap/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -56,6 +56,7 @@ struct omap_irq_bank { unsigned long base_reg; unsigned long trigger_map; + unsigned long wake_enable; }; static unsigned int irq_bank_count = 0; @@ -105,6 +106,19 @@ static void omap_mask_ack_irq(unsigned int irq) omap_ack_irq(irq); } +static int omap_wake_irq(unsigned int irq, unsigned int enable) +{ + int bank = IRQ_BANK(irq); + + if (enable) + irq_banks[bank].wake_enable |= IRQ_BIT(irq); + else + irq_banks[bank].wake_enable &= ~IRQ_BIT(irq); + + return 0; +} + + /* * Allows tuning the IRQ type and priority * @@ -145,7 +159,7 @@ static struct omap_irq_bank omap1510_irq_banks[] = { static struct omap_irq_bank omap1610_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3fefe8f }, { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb7c1fd }, - { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0xfffff7ff }, + { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0xffffb7ff }, { .base_reg = OMAP_IH2_BASE + 0x200, .trigger_map = 0xffffffff }, }; #endif @@ -154,6 +168,7 @@ static struct irqchip omap_irq_chip = { .ack = omap_mask_ack_irq, .mask = omap_mask_irq, .unmask = omap_unmask_irq, + .wake = omap_wake_irq, }; void __init omap_init_irq(void) diff --git a/arch/arm/mach-omap/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index 6e98290cca5c..ec0d8285f243 100644 --- a/arch/arm/mach-omap/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/kernel_stat.h> #include <linux/sched.h> -#include <linux/version.h> #include <asm/io.h> #include <asm/hardware.h> diff --git a/arch/arm/mach-omap/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c index 8043b7d0f66e..8043b7d0f66e 100644 --- a/arch/arm/mach-omap/leds-innovator.c +++ b/arch/arm/mach-omap1/leds-innovator.c diff --git a/arch/arm/mach-omap/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index f5177f430793..4a0e8b9d4fc3 100644 --- a/arch/arm/mach-omap/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -129,14 +129,11 @@ void osk_leds_event(led_event_t evt) #ifdef CONFIG_FB_OMAP -#ifdef CONFIG_LEDS_TIMER case led_timer: hw_led_state ^= TIMER_LED; mistral_setled(); break; -#endif -#ifdef CONFIG_LEDS_CPU case led_idle_start: hw_led_state |= IDLE_LED; mistral_setled(); @@ -146,7 +143,6 @@ void osk_leds_event(led_event_t evt) hw_led_state &= ~IDLE_LED; mistral_setled(); break; -#endif #endif /* CONFIG_FB_OMAP */ diff --git a/arch/arm/mach-omap/leds.c b/arch/arm/mach-omap1/leds.c index 8ab21fe98e1b..8ab21fe98e1b 100644 --- a/arch/arm/mach-omap/leds.c +++ b/arch/arm/mach-omap1/leds.c diff --git a/arch/arm/mach-omap/leds.h b/arch/arm/mach-omap1/leds.h index a1e9fedc376c..a1e9fedc376c 100644 --- a/arch/arm/mach-omap/leds.h +++ b/arch/arm/mach-omap1/leds.h diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c new file mode 100644 index 000000000000..214e5d17c8b5 --- /dev/null +++ b/arch/arm/mach-omap1/serial.c @@ -0,0 +1,200 @@ +/* + * linux/arch/arm/mach-omap1/id.c + * + * OMAP1 CPU identification code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_8250.h> +#include <linux/serial_reg.h> + +#include <asm/io.h> +#include <asm/mach-types.h> +#include <asm/hardware/clock.h> + +#include <asm/arch/board.h> +#include <asm/arch/mux.h> +#include <asm/arch/fpga.h> + +static struct clk * uart1_ck = NULL; +static struct clk * uart2_ck = NULL; +static struct clk * uart3_ck = NULL; + +static inline unsigned int omap_serial_in(struct plat_serial8250_port *up, + int offset) +{ + offset <<= up->regshift; + return (unsigned int)__raw_readb(up->membase + offset); +} + +static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset, + int value) +{ + offset <<= p->regshift; + __raw_writeb(value, p->membase + offset); +} + +/* + * Internal UARTs need to be initialized for the 8250 autoconfig to work + * properly. Note that the TX watermark initialization may not be needed + * once the 8250.c watermark handling code is merged. + */ +static void __init omap_serial_reset(struct plat_serial8250_port *p) +{ + omap_serial_outp(p, UART_OMAP_MDR1, 0x07); /* disable UART */ + omap_serial_outp(p, UART_OMAP_SCR, 0x08); /* TX watermark */ + omap_serial_outp(p, UART_OMAP_MDR1, 0x00); /* enable UART */ + + if (!cpu_is_omap1510()) { + omap_serial_outp(p, UART_OMAP_SYSC, 0x01); + while (!(omap_serial_in(p, UART_OMAP_SYSC) & 0x01)); + } +} + +static struct plat_serial8250_port serial_platform_data[] = { + { + .membase = (char*)IO_ADDRESS(OMAP_UART1_BASE), + .mapbase = (unsigned long)OMAP_UART1_BASE, + .irq = INT_UART1, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, + { + .membase = (char*)IO_ADDRESS(OMAP_UART2_BASE), + .mapbase = (unsigned long)OMAP_UART2_BASE, + .irq = INT_UART2, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, + { + .membase = (char*)IO_ADDRESS(OMAP_UART3_BASE), + .mapbase = (unsigned long)OMAP_UART3_BASE, + .irq = INT_UART3, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, + { }, +}; + +static struct platform_device serial_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = serial_platform_data, + }, +}; + +/* + * Note that on Innovator-1510 UART2 pins conflict with USB2. + * By default UART2 does not work on Innovator-1510 if you have + * USB OHCI enabled. To use UART2, you must disable USB2 first. + */ +void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS]) +{ + int i; + + if (cpu_is_omap730()) { + serial_platform_data[0].regshift = 0; + serial_platform_data[1].regshift = 0; + serial_platform_data[0].irq = INT_730_UART_MODEM_1; + serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2; + } + + if (cpu_is_omap1510()) { + serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16; + serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16; + serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16; + } + + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { + unsigned char reg; + + if (ports[i] == 0) { + serial_platform_data[i].membase = NULL; + serial_platform_data[i].mapbase = 0; + continue; + } + + switch (i) { + case 0: + uart1_ck = clk_get(NULL, "uart1_ck"); + if (IS_ERR(uart1_ck)) + printk("Could not get uart1_ck\n"); + else { + clk_use(uart1_ck); + if (cpu_is_omap1510()) + clk_set_rate(uart1_ck, 12000000); + } + if (cpu_is_omap1510()) { + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + if (machine_is_omap_innovator()) { + reg = fpga_read(OMAP1510_FPGA_POWER); + reg |= OMAP1510_FPGA_PCR_COM1_EN; + fpga_write(reg, OMAP1510_FPGA_POWER); + udelay(10); + } + } + break; + case 1: + uart2_ck = clk_get(NULL, "uart2_ck"); + if (IS_ERR(uart2_ck)) + printk("Could not get uart2_ck\n"); + else { + clk_use(uart2_ck); + if (cpu_is_omap1510()) + clk_set_rate(uart2_ck, 12000000); + else + clk_set_rate(uart2_ck, 48000000); + } + if (cpu_is_omap1510()) { + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + if (machine_is_omap_innovator()) { + reg = fpga_read(OMAP1510_FPGA_POWER); + reg |= OMAP1510_FPGA_PCR_COM2_EN; + fpga_write(reg, OMAP1510_FPGA_POWER); + udelay(10); + } + } + break; + case 2: + uart3_ck = clk_get(NULL, "uart3_ck"); + if (IS_ERR(uart3_ck)) + printk("Could not get uart3_ck\n"); + else { + clk_use(uart3_ck); + if (cpu_is_omap1510()) + clk_set_rate(uart3_ck, 12000000); + } + if (cpu_is_omap1510()) { + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + } + break; + } + omap_serial_reset(&serial_platform_data[i]); + } +} + +static int __init omap_init(void) +{ + return platform_device_register(&serial_device); +} +arch_initcall(omap_init); diff --git a/arch/arm/mach-omap/time.c b/arch/arm/mach-omap1/time.c index 4205fdcb632c..d540539c9bbb 100644 --- a/arch/arm/mach-omap/time.c +++ b/arch/arm/mach-omap1/time.c @@ -1,10 +1,10 @@ /* - * linux/arch/arm/mach-omap/time.c + * linux/arch/arm/mach-omap1/time.c * * OMAP Timers * * Copyright (C) 2004 Nokia Corporation - * Partial timer rewrite and additional VST timer support by + * Partial timer rewrite and additional dynamic tick timer support by * Tony Lindgen <tony@atomide.com> and * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * @@ -58,17 +58,9 @@ struct sys_timer omap_timer; * MPU timer * --------------------------------------------------------------------------- */ -#define OMAP_MPU_TIMER1_BASE (0xfffec500) -#define OMAP_MPU_TIMER2_BASE (0xfffec600) -#define OMAP_MPU_TIMER3_BASE (0xfffec700) #define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE #define OMAP_MPU_TIMER_OFFSET 0x100 -#define MPU_TIMER_FREE (1 << 6) -#define MPU_TIMER_CLOCK_ENABLE (1 << 5) -#define MPU_TIMER_AR (1 << 1) -#define MPU_TIMER_ST (1 << 0) - /* cycles to nsec conversions taken from arch/i386/kernel/timers/timer_tsc.c, * converted to use kHz by Kevin Hilman */ /* convert from cycles(64bits) => nanoseconds (64bits) @@ -188,8 +180,8 @@ static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id, static struct irqaction omap_mpu_timer_irq = { .name = "mpu timer", - .flags = SA_INTERRUPT, - .handler = omap_mpu_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = omap_mpu_timer_interrupt, }; static unsigned long omap_mpu_timer1_overflows; @@ -203,7 +195,7 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id, static struct irqaction omap_mpu_timer1_irq = { .name = "mpu timer1 overflow", .flags = SA_INTERRUPT, - .handler = omap_mpu_timer1_interrupt + .handler = omap_mpu_timer1_interrupt, }; static __init void omap_init_mpu_timer(void) @@ -255,13 +247,19 @@ unsigned long long sched_clock(void) #define OMAP_32K_TIMER_TCR 0x04 #define OMAP_32K_TICKS_PER_HZ (32768 / HZ) +#if (32768 % HZ) != 0 +/* We cannot ignore modulo. + * Potential error can be as high as several percent. + */ +#define OMAP_32K_TICK_MODULO (32768 % HZ) +static unsigned modulo_count = 0; /* Counts 1/HZ units */ +#endif /* * TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1 * so with HZ = 100, TVR = 327.68. */ #define OMAP_32K_TIMER_TICK_PERIOD ((32768 / HZ) - 1) -#define MAX_SKIP_JIFFIES 25 #define TIMER_32K_SYNCHRONIZED 0xfffbc410 #define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \ @@ -332,6 +330,19 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, now = omap_32k_sync_timer_read(); while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) { +#ifdef OMAP_32K_TICK_MODULO + /* Modulo addition may put omap_32k_last_tick ahead of now + * and cause unwanted repetition of the while loop. + */ + if (unlikely(now - omap_32k_last_tick == ~0)) + break; + + modulo_count += OMAP_32K_TICK_MODULO; + if (modulo_count > HZ) { + ++omap_32k_last_tick; + modulo_count -= HZ; + } +#endif omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ; timer_tick(regs); } @@ -347,14 +358,55 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, return IRQ_HANDLED; } +#ifdef CONFIG_NO_IDLE_HZ +/* + * Programs the next timer interrupt needed. Called when dynamic tick is + * enabled, and to reprogram the ticks to skip from pm_idle. Note that + * we can keep the timer continuous, and don't need to set it to run in + * one-shot mode. This is because the timer will get reprogrammed again + * after next interrupt. + */ +void omap_32k_timer_reprogram(unsigned long next_tick) +{ + omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1); +} + +static struct irqaction omap_32k_timer_irq; +extern struct timer_update_handler timer_update; + +static int omap_32k_timer_enable_dyn_tick(void) +{ + /* No need to reprogram timer, just use the next interrupt */ + return 0; +} + +static int omap_32k_timer_disable_dyn_tick(void) +{ + omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD); + return 0; +} + +static struct dyn_tick_timer omap_dyn_tick_timer = { + .enable = omap_32k_timer_enable_dyn_tick, + .disable = omap_32k_timer_disable_dyn_tick, + .reprogram = omap_32k_timer_reprogram, + .handler = omap_32k_timer_interrupt, +}; +#endif /* CONFIG_NO_IDLE_HZ */ + static struct irqaction omap_32k_timer_irq = { .name = "32KHz timer", - .flags = SA_INTERRUPT, - .handler = omap_32k_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = omap_32k_timer_interrupt, }; static __init void omap_init_32k_timer(void) { + +#ifdef CONFIG_NO_IDLE_HZ + omap_timer.dyn_tick = &omap_dyn_tick_timer; +#endif + setup_irq(INT_OS_TIMER, &omap_32k_timer_irq); omap_timer.offset = omap_32k_timer_gettimeoffset; omap_32k_last_tick = omap_32k_sync_timer_read(); @@ -367,7 +419,7 @@ static __init void omap_init_32k_timer(void) * Timer initialization * --------------------------------------------------------------------------- */ -void __init omap_timer_init(void) +static void __init omap_timer_init(void) { #if defined(CONFIG_OMAP_MPU_TIMER) omap_init_mpu_timer(); diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index c4e6d2523585..efc2f657184e 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -24,3 +24,7 @@ obj-$(CONFIG_LEDS) += $(led-y) # Misc features obj-$(CONFIG_PM) += pm.o sleep.o + +ifeq ($(CONFIG_PXA27x),y) +obj-$(CONFIG_PM) += standby.o +endif diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index f691cf77d390..86b862f56e7e 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -287,34 +287,40 @@ static void __init corgi_map_io(void) #ifdef CONFIG_MACH_CORGI MACHINE_START(CORGI, "SHARP Corgi") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - FIXUP(fixup_corgi) - MAPIO(corgi_map_io) - INITIRQ(corgi_init_irq) - .init_machine = corgi_init, - .timer = &pxa_timer, + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_corgi, + .map_io = corgi_map_io, + .init_irq = corgi_init_irq, + .init_machine = corgi_init, + .timer = &pxa_timer, MACHINE_END #endif #ifdef CONFIG_MACH_SHEPHERD MACHINE_START(SHEPHERD, "SHARP Shepherd") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - FIXUP(fixup_corgi) - MAPIO(corgi_map_io) - INITIRQ(corgi_init_irq) - .init_machine = corgi_init, - .timer = &pxa_timer, + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_corgi, + .map_io = corgi_map_io, + .init_irq = corgi_init_irq, + .init_machine = corgi_init, + .timer = &pxa_timer, MACHINE_END #endif #ifdef CONFIG_MACH_HUSKY MACHINE_START(HUSKY, "SHARP Husky") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - FIXUP(fixup_corgi) - MAPIO(corgi_map_io) - INITIRQ(corgi_init_irq) - .init_machine = corgi_init, - .timer = &pxa_timer, + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_corgi, + .map_io = corgi_map_io, + .init_irq = corgi_init_irq, + .init_machine = corgi_init, + .timer = &pxa_timer, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index c5a66bf4d3d5..386e107b53cc 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -181,10 +181,12 @@ static void __init idp_map_io(void) MACHINE_START(PXA_IDP, "Vibren PXA255 IDP") - MAINTAINER("Vibren Technologies") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - MAPIO(idp_map_io) - INITIRQ(idp_init_irq) + /* Maintainer: Vibren Technologies */ + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = idp_map_io, + .init_irq = idp_init_irq, .timer = &pxa_timer, - INIT_MACHINE(idp_init) + .init_machine = idp_init, MACHINE_END diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index f2c9e0d2b24b..6309853b59be 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -268,10 +268,12 @@ static void __init lubbock_map_io(void) } MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") - MAINTAINER("MontaVista Software Inc.") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - MAPIO(lubbock_map_io) - INITIRQ(lubbock_init_irq) + /* Maintainer: MontaVista Software Inc. */ + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = lubbock_map_io, + .init_irq = lubbock_init_irq, .timer = &pxa_timer, - INIT_MACHINE(lubbock_init) + .init_machine = lubbock_init, MACHINE_END diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 9896afca751f..827b7b5a5be8 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -345,10 +345,12 @@ static void __init mainstone_map_io(void) } MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") - MAINTAINER("MontaVista Software Inc.") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - MAPIO(mainstone_map_io) - INITIRQ(mainstone_init_irq) + /* Maintainer: MontaVista Software Inc. */ + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = mainstone_map_io, + .init_irq = mainstone_init_irq, .timer = &pxa_timer, - INIT_MACHINE(mainstone_init) + .init_machine = mainstone_init, MACHINE_END diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index b6c746ea3830..0e4f6fab100a 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -180,10 +180,12 @@ static void __init poodle_map_io(void) } MACHINE_START(POODLE, "SHARP Poodle") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - FIXUP(fixup_poodle) - MAPIO(poodle_map_io) - INITIRQ(pxa_init_irq) - .timer = &pxa_timer, - .init_machine = poodle_init, + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_poodle, + .map_io = poodle_map_io, + .init_irq = pxa_init_irq, + .timer = &pxa_timer, + .init_machine = poodle_init, MACHINE_END diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 893964fb9659..9a791b07118d 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -126,6 +126,7 @@ int pxa_cpu_pm_prepare(suspend_state_t state) { switch (state) { case PM_SUSPEND_MEM: + case PM_SUSPEND_STANDBY: return 0; default: return -EINVAL; @@ -138,7 +139,10 @@ void pxa_cpu_pm_enter(suspend_state_t state) extern void pxa_cpu_suspend(unsigned int); extern void pxa_cpu_resume(void); - CKEN = CKEN22_MEMC | CKEN9_OSTIMER; + if (state == PM_SUSPEND_STANDBY) + CKEN = CKEN22_MEMC | CKEN9_OSTIMER | CKEN16_LCD |CKEN0_PWM0; + else + CKEN = CKEN22_MEMC | CKEN9_OSTIMER; /* ensure voltage-change sequencer not initiated, which hangs */ PCFR &= ~PCFR_FVC; @@ -147,6 +151,9 @@ void pxa_cpu_pm_enter(suspend_state_t state) PEDR = 0xDF12FE1B; switch (state) { + case PM_SUSPEND_STANDBY: + pxa_cpu_standby(); + break; case PM_SUSPEND_MEM: /* set resume return address */ PSPR = virt_to_phys(pxa_cpu_resume); diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S new file mode 100644 index 000000000000..8a3f27b76784 --- /dev/null +++ b/arch/arm/mach-pxa/standby.S @@ -0,0 +1,32 @@ +/* + * PXA27x standby mode + * + * Author: David Burrage + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/hardware.h> + +#include <asm/arch/pxa-regs.h> + + .text + +ENTRY(pxa_cpu_standby) + ldr r0, =PSSR + mov r1, #(PSSR_PH | PSSR_STS) + mov r2, #2 + mov r3, #UNCACHED_PHYS_0 @ Read mem context in. + ldr ip, [r3] + b 1f + + .align 5 +1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby + str r1, [r0] @ make sure PSSR_PH/STS are clear + mov pc, lr diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 473fb6173f72..6e5202154f91 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -105,8 +105,8 @@ pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction pxa_timer_irq = { .name = "PXA Timer Tick", - .flags = SA_INTERRUPT, - .handler = pxa_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = pxa_timer_interrupt, }; static void __init pxa_timer_init(void) diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index 815c53225cd8..a10268618f74 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -32,10 +32,7 @@ extern void rpc_init_irq(void); -extern unsigned int vram_size; - -#if 0 - +unsigned int vram_size; unsigned int memc_ctrl_reg; unsigned int number_mfm_drives; @@ -63,8 +60,6 @@ static int __init parse_tag_acorn(const struct tag *tag) __tagtable(ATAG_ACORN, parse_tag_acorn); -#endif - static struct map_desc rpc_io_desc[] __initdata = { { SCREEN_BASE, SCREEN_START, 2*1048576, MT_DEVICE }, /* VRAM */ { (u32)IO_BASE, IO_START, IO_SIZE , MT_DEVICE }, /* IO space */ @@ -168,12 +163,14 @@ arch_initcall(rpc_init); extern struct sys_timer ioc_timer; MACHINE_START(RISCPC, "Acorn-RiscPC") - MAINTAINER("Russell King") - BOOT_MEM(0x10000000, 0x03000000, 0xe0000000) - BOOT_PARAMS(0x10000100) - DISABLE_PARPORT(0) - DISABLE_PARPORT(1) - MAPIO(rpc_map_io) - INITIRQ(rpc_init_irq) + /* Maintainer: Russell King */ + .phys_ram = 0x10000000, + .phys_io = 0x03000000, + .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .reserve_lp0 = 1, + .reserve_lp1 = 1, + .map_io = rpc_map_io, + .init_irq = rpc_init_irq, .timer = &ioc_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 534df0c6c770..d4d03d0daaec 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -154,6 +154,11 @@ config S3C2410_PM_CHECK_CHUNKSIZE the CRC data block will take more memory, but wil identify any faults with better precision. +config PM_SIMTEC + bool + depends on PM && (ARCH_BAST || MACH_VR1000) + default y + config S3C2410_LOWLEVEL_UART_PORT int "S3C2410 UART to use for low-level messages" default 0 diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 7c379aad5d62..55ed7c7e57da 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -18,10 +18,13 @@ obj-$(CONFIG_S3C2410_DMA) += dma.o # Power Management support obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o # S3C2440 support obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o # machine specific support diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 8d986b8401c2..9a66050e887d 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -448,60 +448,3 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, return 0; } - -/* S3C2440 extended clock support */ - -#ifdef CONFIG_CPU_S3C2440 - -static struct clk s3c2440_clk_upll = { - .name = "upll", - .id = -1, -}; - -static struct clk s3c2440_clk_cam = { - .name = "camif", - .parent = &clk_h, - .id = -1, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2440_clk_ac97 = { - .name = "ac97", - .parent = &clk_p, - .id = -1, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static int s3c2440_clk_add(struct sys_device *sysdev) -{ - unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); - - s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate); - - printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n", - print_mhz(s3c2440_clk_upll.rate)); - - s3c24xx_register_clock(&s3c2440_clk_ac97); - s3c24xx_register_clock(&s3c2440_clk_cam); - s3c24xx_register_clock(&s3c2440_clk_upll); - - clk_disable(&s3c2440_clk_ac97); - clk_disable(&s3c2440_clk_cam); - - return 0; -} - -static struct sysdev_driver s3c2440_clk_driver = { - .add = s3c2440_clk_add, -}; - -static int s3c24xx_clk_driver(void) -{ - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver); -} - -arch_initcall(s3c24xx_clk_driver); - -#endif /* CONFIG_CPU_S3C2440 */ diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index 64792f678668..4664bd11adc1 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -96,8 +96,8 @@ struct platform_device s3c_device_lcd = { .num_resources = ARRAY_SIZE(s3c_lcd_resource), .resource = s3c_lcd_resource, .dev = { - .dma_mask = &s3c_device_lcd_dmamask, - .coherent_dma_mask = 0xffffffffUL + .dma_mask = &s3c_device_lcd_dmamask, + .coherent_dma_mask = 0xffffffffUL } }; diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index c7c28890d406..65feaf20d23e 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -436,7 +436,7 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC); if (buf == NULL) { - pr_debug("%s: out of memory (%d alloc)\n", + pr_debug("%s: out of memory (%ld alloc)\n", __FUNCTION__, sizeof(*buf)); return -ENOMEM; } diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index b668c48f4399..973a5fe6769c 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -40,8 +40,14 @@ * 04-Nov-2004 Ben Dooks * Fix standard IRQ wake for EINT0..4 and RTC * - * 22-Feb-2004 Ben Dooks + * 22-Feb-2005 Ben Dooks * Fixed edge-triggering on ADC IRQ + * + * 28-Jun-2005 Ben Dooks + * Mark IRQ_LCD valid + * + * 25-Jul-2005 Ben Dooks + * Split the S3C2440 IRQ code to seperate file */ #include <linux/init.h> @@ -62,11 +68,7 @@ #include "cpu.h" #include "pm.h" - -#define irqdbf(x...) -#define irqdbf2(x...) - -#define EXTINT_OFF (IRQ_EINT4 - 4) +#include "irq.h" /* wakeup irq control */ @@ -178,7 +180,7 @@ s3c_irq_unmask(unsigned int irqno) __raw_writel(mask, S3C2410_INTMSK); } -static struct irqchip s3c_irq_level_chip = { +struct irqchip s3c_irq_level_chip = { .ack = s3c_irq_maskack, .mask = s3c_irq_mask, .unmask = s3c_irq_unmask, @@ -366,86 +368,7 @@ static struct irqchip s3c_irq_eint0t4 = { #define INTMSK_UART1 (1UL << (IRQ_UART1 - IRQ_EINT0)) #define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0)) #define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0)) -#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0)) - -static inline void -s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, - int subcheck) -{ - unsigned long mask; - unsigned long submask; - - submask = __raw_readl(S3C2410_INTSUBMSK); - mask = __raw_readl(S3C2410_INTMSK); - - submask |= (1UL << (irqno - IRQ_S3CUART_RX0)); - - /* check to see if we need to mask the parent IRQ */ - - if ((submask & subcheck) == subcheck) { - __raw_writel(mask | parentbit, S3C2410_INTMSK); - } - - /* write back masks */ - __raw_writel(submask, S3C2410_INTSUBMSK); - -} - -static inline void -s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) -{ - unsigned long mask; - unsigned long submask; - - submask = __raw_readl(S3C2410_INTSUBMSK); - mask = __raw_readl(S3C2410_INTMSK); - - submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0)); - mask &= ~parentbit; - - /* write back masks */ - __raw_writel(submask, S3C2410_INTSUBMSK); - __raw_writel(mask, S3C2410_INTMSK); -} - - -static inline void -s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group) -{ - unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); - - s3c_irqsub_mask(irqno, parentmask, group); - - __raw_writel(bit, S3C2410_SUBSRCPND); - - /* only ack parent if we've got all the irqs (seems we must - * ack, all and hope that the irq system retriggers ok when - * the interrupt goes off again) - */ - - if (1) { - __raw_writel(parentmask, S3C2410_SRCPND); - __raw_writel(parentmask, S3C2410_INTPND); - } -} - -static inline void -s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group) -{ - unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); - - __raw_writel(bit, S3C2410_SUBSRCPND); - /* only ack parent if we've got all the irqs (seems we must - * ack, all and hope that the irq system retriggers ok when - * the interrupt goes off again) - */ - - if (1) { - __raw_writel(parentmask, S3C2410_SRCPND); - __raw_writel(parentmask, S3C2410_INTPND); - } -} /* UART0 */ @@ -716,7 +639,6 @@ void __init s3c24xx_init_irq(void) case IRQ_UART0: case IRQ_UART1: case IRQ_UART2: - case IRQ_LCD: case IRQ_ADCPARENT: set_irq_chip(irqno, &s3c_irq_level_chip); set_irq_handler(irqno, do_level_IRQ); @@ -793,174 +715,3 @@ void __init s3c24xx_init_irq(void) irqdbf("s3c2410: registered interrupt handlers\n"); } - -/* s3c2440 irq code -*/ - -#ifdef CONFIG_CPU_S3C2440 - -/* WDT/AC97 */ - -static void s3c_irq_demux_wdtac97(unsigned int irq, - struct irqdesc *desc, - struct pt_regs *regs) -{ - unsigned int subsrc, submsk; - struct irqdesc *mydesc; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 13; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - mydesc = irq_desc + IRQ_S3C2440_WDT; - mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs); - } - if (subsrc & 2) { - mydesc = irq_desc + IRQ_S3C2440_AC97; - mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs); - } - } -} - - -#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0)) - -static void -s3c_irq_wdtac97_mask(unsigned int irqno) -{ - s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<13); -} - -static void -s3c_irq_wdtac97_unmask(unsigned int irqno) -{ - s3c_irqsub_unmask(irqno, INTMSK_WDT); -} - -static void -s3c_irq_wdtac97_ack(unsigned int irqno) -{ - s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13); -} - -static struct irqchip s3c_irq_wdtac97 = { - .mask = s3c_irq_wdtac97_mask, - .unmask = s3c_irq_wdtac97_unmask, - .ack = s3c_irq_wdtac97_ack, -}; - -/* camera irq */ - -static void s3c_irq_demux_cam(unsigned int irq, - struct irqdesc *desc, - struct pt_regs *regs) -{ - unsigned int subsrc, submsk; - struct irqdesc *mydesc; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 11; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - mydesc = irq_desc + IRQ_S3C2440_CAM_C; - mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs); - } - if (subsrc & 2) { - mydesc = irq_desc + IRQ_S3C2440_CAM_P; - mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs); - } - } -} - -#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) - -static void -s3c_irq_cam_mask(unsigned int irqno) -{ - s3c_irqsub_mask(irqno, INTMSK_CAM, 3<<11); -} - -static void -s3c_irq_cam_unmask(unsigned int irqno) -{ - s3c_irqsub_unmask(irqno, INTMSK_CAM); -} - -static void -s3c_irq_cam_ack(unsigned int irqno) -{ - s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11); -} - -static struct irqchip s3c_irq_cam = { - .mask = s3c_irq_cam_mask, - .unmask = s3c_irq_cam_unmask, - .ack = s3c_irq_cam_ack, -}; - -static int s3c2440_irq_add(struct sys_device *sysdev) -{ - unsigned int irqno; - - printk("S3C2440: IRQ Support\n"); - - set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip); - set_irq_handler(IRQ_NFCON, do_level_IRQ); - set_irq_flags(IRQ_NFCON, IRQF_VALID); - - /* add new chained handler for wdt, ac7 */ - - set_irq_chip(IRQ_WDT, &s3c_irq_level_chip); - set_irq_handler(IRQ_WDT, do_level_IRQ); - set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); - - for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) { - set_irq_chip(irqno, &s3c_irq_wdtac97); - set_irq_handler(irqno, do_level_IRQ); - set_irq_flags(irqno, IRQF_VALID); - } - - /* add chained handler for camera */ - - set_irq_chip(IRQ_CAM, &s3c_irq_level_chip); - set_irq_handler(IRQ_CAM, do_level_IRQ); - set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam); - - for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { - set_irq_chip(irqno, &s3c_irq_cam); - set_irq_handler(irqno, do_level_IRQ); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct sysdev_driver s3c2440_irq_driver = { - .add = s3c2440_irq_add, -}; - -static int s3c24xx_irq_driver(void) -{ - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver); -} - -arch_initcall(s3c24xx_irq_driver); - -#endif /* CONFIG_CPU_S3C2440 */ - diff --git a/arch/arm/mach-s3c2410/irq.h b/arch/arm/mach-s3c2410/irq.h new file mode 100644 index 000000000000..4abf0ca14e00 --- /dev/null +++ b/arch/arm/mach-s3c2410/irq.h @@ -0,0 +1,99 @@ +/* arch/arm/mach-s3c2410/irq.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for S3C24XX CPU IRQ support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: +*/ + +#define irqdbf(x...) +#define irqdbf2(x...) + +#define EXTINT_OFF (IRQ_EINT4 - 4) + +extern struct irqchip s3c_irq_level_chip; + +static inline void +s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, + int subcheck) +{ + unsigned long mask; + unsigned long submask; + + submask = __raw_readl(S3C2410_INTSUBMSK); + mask = __raw_readl(S3C2410_INTMSK); + + submask |= (1UL << (irqno - IRQ_S3CUART_RX0)); + + /* check to see if we need to mask the parent IRQ */ + + if ((submask & subcheck) == subcheck) { + __raw_writel(mask | parentbit, S3C2410_INTMSK); + } + + /* write back masks */ + __raw_writel(submask, S3C2410_INTSUBMSK); + +} + +static inline void +s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) +{ + unsigned long mask; + unsigned long submask; + + submask = __raw_readl(S3C2410_INTSUBMSK); + mask = __raw_readl(S3C2410_INTMSK); + + submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0)); + mask &= ~parentbit; + + /* write back masks */ + __raw_writel(submask, S3C2410_INTSUBMSK); + __raw_writel(mask, S3C2410_INTMSK); +} + + +static inline void +s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group) +{ + unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); + + s3c_irqsub_mask(irqno, parentmask, group); + + __raw_writel(bit, S3C2410_SUBSRCPND); + + /* only ack parent if we've got all the irqs (seems we must + * ack, all and hope that the irq system retriggers ok when + * the interrupt goes off again) + */ + + if (1) { + __raw_writel(parentmask, S3C2410_SRCPND); + __raw_writel(parentmask, S3C2410_INTPND); + } +} + +static inline void +s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group) +{ + unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); + + __raw_writel(bit, S3C2410_SUBSRCPND); + + /* only ack parent if we've got all the irqs (seems we must + * ack, all and hope that the irq system retriggers ok when + * the interrupt goes off again) + */ + + if (1) { + __raw_writel(parentmask, S3C2410_SRCPND); + __raw_writel(parentmask, S3C2410_INTPND); + } +} diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 3bb97eb6e693..e9182242da95 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -25,7 +25,12 @@ * 14-Jan-2005 BJD Add support for muitlple NAND devices * 03-Mar-2005 BJD Ensured that bast-cpld.h is included * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA - * 14-Mar-2006 BJD Updated for __iomem changes + * 14-Mar-2005 BJD Updated for __iomem changes + * 22-Jun-2005 BJD Added DM9000 platform information + * 28-Jun-2005 BJD Moved pm functionality out to common code + * 17-Jul-2005 BJD Changed to platform device for SuperIO 16550s + * 25-Jul-2005 BJD Removed ASIX static mappings + * 27-Jul-2005 BJD Ensure maximum frequency of i2c bus */ #include <linux/kernel.h> @@ -35,6 +40,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/dm9000.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -53,18 +59,21 @@ #include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> #include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> #include <asm/arch/nand.h> +#include <asm/arch/iic.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> +#include <linux/serial_8250.h> + #include "clock.h" #include "devs.h" #include "cpu.h" #include "usb-simtec.h" -#include "pm.h" #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics" @@ -110,9 +119,7 @@ static struct map_desc bast_iodesc[] __initdata = { /* slow, byte */ { VA_C2(BAST_VA_ISAIO), PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, { VA_C2(BAST_VA_ISAMEM), PA_CS2(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C2(BAST_VA_ASIXNET), PA_CS3(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE }, { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, - { VA_C2(BAST_VA_DM9000), PA_CS2(BAST_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C2(BAST_VA_IDEPRI), PA_CS3(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C2(BAST_VA_IDESEC), PA_CS3(BAST_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C2(BAST_VA_IDEPRIAUX), PA_CS3(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, @@ -121,9 +128,7 @@ static struct map_desc bast_iodesc[] __initdata = { /* slow, word */ { VA_C3(BAST_VA_ISAIO), PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, { VA_C3(BAST_VA_ISAMEM), PA_CS3(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C3(BAST_VA_ASIXNET), PA_CS3(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE }, { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, - { VA_C3(BAST_VA_DM9000), PA_CS3(BAST_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C3(BAST_VA_IDEPRI), PA_CS3(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C3(BAST_VA_IDESEC), PA_CS3(BAST_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C3(BAST_VA_IDEPRIAUX), PA_CS3(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, @@ -132,9 +137,7 @@ static struct map_desc bast_iodesc[] __initdata = { /* fast, byte */ { VA_C4(BAST_VA_ISAIO), PA_CS4(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, { VA_C4(BAST_VA_ISAMEM), PA_CS4(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C4(BAST_VA_ASIXNET), PA_CS5(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE }, { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, - { VA_C4(BAST_VA_DM9000), PA_CS4(BAST_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C4(BAST_VA_IDEPRI), PA_CS5(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C4(BAST_VA_IDESEC), PA_CS5(BAST_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C4(BAST_VA_IDEPRIAUX), PA_CS5(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, @@ -143,9 +146,7 @@ static struct map_desc bast_iodesc[] __initdata = { /* fast, word */ { VA_C5(BAST_VA_ISAIO), PA_CS5(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, { VA_C5(BAST_VA_ISAMEM), PA_CS5(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C5(BAST_VA_ASIXNET), PA_CS5(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE }, { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, - { VA_C5(BAST_VA_DM9000), PA_CS5(BAST_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C5(BAST_VA_IDEPRI), PA_CS5(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C5(BAST_VA_IDESEC), PA_CS5(BAST_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C5(BAST_VA_IDEPRIAUX), PA_CS5(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, @@ -305,7 +306,7 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot) } static struct s3c2410_platform_nand bast_nand_info = { - .tacls = 80, + .tacls = 40, .twrph0 = 80, .twrph1 = 80, .nr_sets = ARRAY_SIZE(bast_nand_sets), @@ -313,6 +314,89 @@ static struct s3c2410_platform_nand bast_nand_info = { .select_chip = bast_nand_select, }; +/* DM9000 */ + +static struct resource bast_dm9k_resource[] = { + [0] = { + .start = S3C2410_CS5 + BAST_PA_DM9000, + .end = S3C2410_CS5 + BAST_PA_DM9000 + 3, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40, + .end = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = IRQ_DM9000, + .end = IRQ_DM9000, + .flags = IORESOURCE_IRQ + } + +}; + +/* for the moment we limit ourselves to 16bit IO until some + * better IO routines can be written and tested +*/ + +struct dm9000_plat_data bast_dm9k_platdata = { + .flags = DM9000_PLATF_16BITONLY +}; + +static struct platform_device bast_device_dm9k = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(bast_dm9k_resource), + .resource = bast_dm9k_resource, + .dev = { + .platform_data = &bast_dm9k_platdata, + } +}; + +/* serial devices */ + +#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO) +#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ) +#define SERIAL_CLK (1843200) + +static struct plat_serial8250_port bast_sio_data[] = { + [0] = { + .mapbase = SERIAL_BASE + 0x2f8, + .irq = IRQ_PCSERIAL1, + .flags = SERIAL_FLAGS, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = SERIAL_CLK, + }, + [1] = { + .mapbase = SERIAL_BASE + 0x3f8, + .irq = IRQ_PCSERIAL2, + .flags = SERIAL_FLAGS, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = SERIAL_CLK, + }, + { } +}; + +static struct platform_device bast_sio = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = &bast_sio_data, + }, +}; + +/* we have devices on the bus which cannot work much over the + * standard 100KHz i2c bus frequency +*/ + +static struct s3c2410_platform_i2c bast_i2c_info = { + .flags = 0, + .slave_addr = 0x10, + .bus_freq = 100*1000, + .max_freq = 130*1000, +}; /* Standard BAST devices */ @@ -324,7 +408,9 @@ static struct platform_device *bast_devices[] __initdata = { &s3c_device_iis, &s3c_device_rtc, &s3c_device_nand, - &bast_device_nor + &bast_device_nor, + &bast_device_dm9k, + &bast_sio, }; static struct clk *bast_clocks[] = { @@ -358,6 +444,7 @@ void __init bast_map_io(void) s3c24xx_uclk.parent = &s3c24xx_clkout1; s3c_device_nand.dev.platform_data = &bast_nand_info; + s3c_device_i2c.dev.platform_data = &bast_i2c_info; s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); @@ -366,44 +453,14 @@ void __init bast_map_io(void) usb_simtec_init(); } -void __init bast_init_irq(void) -{ - s3c24xx_init_irq(); -} - -#ifdef CONFIG_PM - -/* bast_init_machine - * - * enable the power management functions for the EB2410ITX -*/ - -static __init void bast_init_machine(void) -{ - unsigned long gstatus4; - - printk(KERN_INFO "BAST Power Manangement" COPYRIGHT "\n"); - - gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30; - gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28; - gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK); - - __raw_writel(gstatus4, S3C2410_GSTATUS4); - - s3c2410_pm_init(); -} - -#else -#define bast_init_machine NULL -#endif - MACHINE_START(BAST, "Simtec-BAST") - MAINTAINER("Ben Dooks <ben@simtec.co.uk>") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(bast_map_io) - INITIRQ(bast_init_irq) - .init_machine = bast_init_machine, + /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = bast_map_io, + .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 2924afc068a4..ea4fb1a97a50 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -117,10 +117,12 @@ void __init h1940_init_irq(void) } MACHINE_START(H1940, "IPAQ-H1940") - MAINTAINER("Ben Dooks <ben@fluff.org>") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(h1940_map_io) - INITIRQ(h1940_init_irq) + /* Maintainer: Ben Dooks <ben@fluff.org> */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = h1940_map_io, + .init_irq = h1940_init_irq, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index bd15998c129b..79044d9bce38 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -137,10 +137,11 @@ void __init n30_init(void) } MACHINE_START(N30, "Acer-N30") - MAINTAINER("Christer Weinigel <christer@weinigel.se>, Ben Dooks <ben-linux@fluff.org>") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - + /* Maintainer: Christer Weinigel <christer@weinigel.se>, Ben Dooks <ben-linux@fluff.org> */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .timer = &s3c24xx_timer, .init_machine = n30_init, .init_irq = n30_init_irq, diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2410/mach-nexcoder.c index 70487bf4b71e..d24c242414ca 100644 --- a/arch/arm/mach-s3c2410/mach-nexcoder.c +++ b/arch/arm/mach-s3c2410/mach-nexcoder.c @@ -147,9 +147,11 @@ void __init nexcoder_map_io(void) MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") - MAINTAINER("Guillaume GOURAT <guillaume.gourat@nexvision.tv>") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) + /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = nexcoder_map_io, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index 67d8ce8fb00f..d901ed492ff5 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -115,9 +115,11 @@ void __init otom11_map_io(void) MACHINE_START(OTOM, "Nex Vision - Otom 1.1") - MAINTAINER("Guillaume GOURAT <guillaume.gourat@nexvision.tv>") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) + /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = otom11_map_io, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c index f8d3a9784e71..a73d61c1de46 100644 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ b/arch/arm/mach-s3c2410/mach-rx3715.c @@ -131,11 +131,13 @@ static void __init rx3715_init_machine(void) #endif MACHINE_START(RX3715, "IPAQ-RX3715") - MAINTAINER("Ben Dooks <ben@fluff.org>") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(rx3715_map_io) - INITIRQ(rx3715_init_irq) - INIT_MACHINE(rx3715_init_machine) + /* Maintainer: Ben Dooks <ben@fluff.org> */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = rx3715_map_io, + .init_irq = rx3715_init_irq, + .init_machine = rx3715_init_machine, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index c1a4a1420ea0..67e903a700d3 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -112,11 +112,13 @@ void __init smdk2410_init_irq(void) MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch * to SMDK2410 */ - MAINTAINER("Jonas Dietsche") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(smdk2410_map_io) - INITIRQ(smdk2410_init_irq) + /* Maintainer: Jonas Dietsche */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = smdk2410_map_io, + .init_irq = smdk2410_init_irq, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index 7857176d9bcb..357522106f68 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -124,9 +124,11 @@ void __init smdk2440_machine_init(void) } MACHINE_START(S3C2440, "SMDK2440") - MAINTAINER("Ben Dooks <ben@fluff.org>") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) + /* Maintainer: Ben Dooks <ben@fluff.org> */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .init_irq = s3c24xx_init_irq, .map_io = smdk2440_map_io, diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 5512146b1ce4..924e8464c212 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -27,6 +27,7 @@ * 10-Feb-2005 BJD Added power-off capability * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 14-Mar-2006 BJD void __iomem fixes + * 22-Jun-2006 BJD Added DM9000 platform information */ #include <linux/kernel.h> @@ -35,6 +36,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/dm9000.h> #include <linux/serial.h> #include <linux/tty.h> @@ -98,28 +100,24 @@ static struct map_desc vr1000_iodesc[] __initdata = { * are only 8bit */ /* slow, byte */ - { VA_C2(VR1000_VA_DM9000), PA_CS2(VR1000_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C2(VR1000_VA_IDEPRI), PA_CS3(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C2(VR1000_VA_IDESEC), PA_CS3(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C2(VR1000_VA_IDEPRIAUX), PA_CS3(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, { VA_C2(VR1000_VA_IDESECAUX), PA_CS3(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE }, /* slow, word */ - { VA_C3(VR1000_VA_DM9000), PA_CS3(VR1000_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C3(VR1000_VA_IDEPRI), PA_CS3(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C3(VR1000_VA_IDESEC), PA_CS3(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C3(VR1000_VA_IDEPRIAUX), PA_CS3(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, { VA_C3(VR1000_VA_IDESECAUX), PA_CS3(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE }, /* fast, byte */ - { VA_C4(VR1000_VA_DM9000), PA_CS4(VR1000_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C4(VR1000_VA_IDEPRI), PA_CS5(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C4(VR1000_VA_IDESEC), PA_CS5(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C4(VR1000_VA_IDEPRIAUX), PA_CS5(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, { VA_C4(VR1000_VA_IDESECAUX), PA_CS5(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE }, /* fast, word */ - { VA_C5(VR1000_VA_DM9000), PA_CS5(VR1000_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C5(VR1000_VA_IDEPRI), PA_CS5(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C5(VR1000_VA_IDESEC), PA_CS5(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C5(VR1000_VA_IDEPRIAUX), PA_CS5(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, @@ -246,6 +244,74 @@ static struct platform_device vr1000_nor = { .resource = vr1000_nor_resource, }; +/* DM9000 ethernet devices */ + +static struct resource vr1000_dm9k0_resource[] = { + [0] = { + .start = S3C2410_CS5 + VR1000_PA_DM9000, + .end = S3C2410_CS5 + VR1000_PA_DM9000 + 3, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, + .end = S3C2410_CS5 + VR1000_PA_DM9000 + 0x7f, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = IRQ_VR1000_DM9000A, + .end = IRQ_VR1000_DM9000A, + .flags = IORESOURCE_IRQ + } + +}; + +static struct resource vr1000_dm9k1_resource[] = { + [0] = { + .start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, + .end = S3C2410_CS5 + VR1000_PA_DM9000 + 0x83, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, + .end = S3C2410_CS5 + VR1000_PA_DM9000 + 0xFF, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = IRQ_VR1000_DM9000N, + .end = IRQ_VR1000_DM9000N, + .flags = IORESOURCE_IRQ + } +}; + +/* for the moment we limit ourselves to 16bit IO until some + * better IO routines can be written and tested +*/ + +struct dm9000_plat_data vr1000_dm9k_platdata = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device vr1000_dm9k0 = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(vr1000_dm9k0_resource), + .resource = vr1000_dm9k0_resource, + .dev = { + .platform_data = &vr1000_dm9k_platdata, + } +}; + +static struct platform_device vr1000_dm9k1 = { + .name = "dm9000", + .id = 1, + .num_resources = ARRAY_SIZE(vr1000_dm9k1_resource), + .resource = vr1000_dm9k1_resource, + .dev = { + .platform_data = &vr1000_dm9k_platdata, + } +}; + +/* devices for this board */ static struct platform_device *vr1000_devices[] __initdata = { &s3c_device_usb, @@ -253,8 +319,11 @@ static struct platform_device *vr1000_devices[] __initdata = { &s3c_device_wdt, &s3c_device_i2c, &s3c_device_iis, + &s3c_device_adc, &serial_device, &vr1000_nor, + &vr1000_dm9k0, + &vr1000_dm9k1 }; static struct clk *vr1000_clocks[] = { @@ -302,16 +371,14 @@ void __init vr1000_map_io(void) usb_simtec_init(); } -void __init vr1000_init_irq(void) -{ - s3c24xx_init_irq(); -} MACHINE_START(VR1000, "Thorcom-VR1000") - MAINTAINER("Ben Dooks <ben@simtec.co.uk>") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(vr1000_map_io) - INITIRQ(vr1000_init_irq) + /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = vr1000_map_io, + .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c new file mode 100644 index 000000000000..2cb798832223 --- /dev/null +++ b/arch/arm/mach-s3c2410/pm-simtec.c @@ -0,0 +1,65 @@ +/* linux/arch/arm/mach-s3c2410/pm-simtec.c + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://armlinux.simtec.co.uk/ + * + * Power Management helpers for Simtec S3C24XX implementations + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/hardware.h> +#include <asm/io.h> + +#include <asm/arch/map.h> +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-mem.h> + +#include <asm/mach-types.h> + +#include "pm.h" + +#define COPYRIGHT ", (c) 2005 Simtec Electronics" + +/* pm_simtec_init + * + * enable the power management functions +*/ + +static __init int pm_simtec_init(void) +{ + unsigned long gstatus4; + + /* check which machine we are running on */ + + if (!machine_is_bast() && !machine_is_vr1000()) + return 0; + + printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); + + gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30; + gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28; + gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK); + + __raw_writel(gstatus4, S3C2410_GSTATUS4); + + return s3c2410_pm_init(); +} + +arch_initcall(pm_simtec_init); diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c new file mode 100644 index 000000000000..b018a1f680ce --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2440-clock.c @@ -0,0 +1,116 @@ +/* linux/arch/arm/mach-s3c2410/s3c2440-clock.c + * + * Copyright (c) 2004-2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2440 Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/device.h> +#include <linux/sysdev.h> + +#include <linux/interrupt.h> +#include <linux/ioport.h> + +#include <asm/hardware.h> +#include <asm/atomic.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/hardware/clock.h> +#include <asm/arch/regs-clock.h> + +#include "clock.h" +#include "cpu.h" + +/* S3C2440 extended clock support */ + +static struct clk s3c2440_clk_upll = { + .name = "upll", + .id = -1, +}; + +static struct clk s3c2440_clk_cam = { + .name = "camif", + .id = -1, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2440_CLKCON_CAMERA, +}; + +static struct clk s3c2440_clk_ac97 = { + .name = "ac97", + .id = -1, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2440_CLKCON_CAMERA, +}; + +static int s3c2440_clk_add(struct sys_device *sysdev) +{ + unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); + struct clk *clk_h; + struct clk *clk_p; + struct clk *clk_xtal; + + clk_xtal = clk_get(NULL, "xtal"); + if (IS_ERR(clk_xtal)) { + printk(KERN_ERR "S3C2440: Failed to get clk_xtal\n"); + return -EINVAL; + } + + s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal->rate); + + printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n", + print_mhz(s3c2440_clk_upll.rate)); + + clk_p = clk_get(NULL, "pclk"); + clk_h = clk_get(NULL, "hclk"); + + if (IS_ERR(clk_p) || IS_ERR(clk_h)) { + printk(KERN_ERR "S3C2440: Failed to get parent clocks\n"); + return -EINVAL; + } + + s3c2440_clk_cam.parent = clk_h; + s3c2440_clk_ac97.parent = clk_p; + + s3c24xx_register_clock(&s3c2440_clk_ac97); + s3c24xx_register_clock(&s3c2440_clk_cam); + s3c24xx_register_clock(&s3c2440_clk_upll); + + clk_disable(&s3c2440_clk_ac97); + clk_disable(&s3c2440_clk_cam); + + return 0; +} + +static struct sysdev_driver s3c2440_clk_driver = { + .add = s3c2440_clk_add, +}; + +static __init int s3c24xx_clk_driver(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver); +} + +arch_initcall(s3c24xx_clk_driver); diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c new file mode 100644 index 000000000000..7cb9912242a3 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2440-irq.c @@ -0,0 +1,207 @@ +/* linux/arch/arm/mach-s3c2410/s3c2440-irq.c + * + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Changelog: + * 25-Jul-2005 BJD Split from irq.c + * +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/ptrace.h> +#include <linux/sysdev.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/mach/irq.h> + +#include <asm/arch/regs-irq.h> +#include <asm/arch/regs-gpio.h> + +#include "cpu.h" +#include "pm.h" +#include "irq.h" + +/* WDT/AC97 */ + +static void s3c_irq_demux_wdtac97(unsigned int irq, + struct irqdesc *desc, + struct pt_regs *regs) +{ + unsigned int subsrc, submsk; + struct irqdesc *mydesc; + + /* read the current pending interrupts, and the mask + * for what it is available */ + + subsrc = __raw_readl(S3C2410_SUBSRCPND); + submsk = __raw_readl(S3C2410_INTSUBMSK); + + subsrc &= ~submsk; + subsrc >>= 13; + subsrc &= 3; + + if (subsrc != 0) { + if (subsrc & 1) { + mydesc = irq_desc + IRQ_S3C2440_WDT; + mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs); + } + if (subsrc & 2) { + mydesc = irq_desc + IRQ_S3C2440_AC97; + mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs); + } + } +} + + +#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0)) + +static void +s3c_irq_wdtac97_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<13); +} + +static void +s3c_irq_wdtac97_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_WDT); +} + +static void +s3c_irq_wdtac97_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13); +} + +static struct irqchip s3c_irq_wdtac97 = { + .mask = s3c_irq_wdtac97_mask, + .unmask = s3c_irq_wdtac97_unmask, + .ack = s3c_irq_wdtac97_ack, +}; + +/* camera irq */ + +static void s3c_irq_demux_cam(unsigned int irq, + struct irqdesc *desc, + struct pt_regs *regs) +{ + unsigned int subsrc, submsk; + struct irqdesc *mydesc; + + /* read the current pending interrupts, and the mask + * for what it is available */ + + subsrc = __raw_readl(S3C2410_SUBSRCPND); + submsk = __raw_readl(S3C2410_INTSUBMSK); + + subsrc &= ~submsk; + subsrc >>= 11; + subsrc &= 3; + + if (subsrc != 0) { + if (subsrc & 1) { + mydesc = irq_desc + IRQ_S3C2440_CAM_C; + mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs); + } + if (subsrc & 2) { + mydesc = irq_desc + IRQ_S3C2440_CAM_P; + mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs); + } + } +} + +#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) + +static void +s3c_irq_cam_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_CAM, 3<<11); +} + +static void +s3c_irq_cam_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_CAM); +} + +static void +s3c_irq_cam_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11); +} + +static struct irqchip s3c_irq_cam = { + .mask = s3c_irq_cam_mask, + .unmask = s3c_irq_cam_unmask, + .ack = s3c_irq_cam_ack, +}; + +static int s3c2440_irq_add(struct sys_device *sysdev) +{ + unsigned int irqno; + + printk("S3C2440: IRQ Support\n"); + + set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip); + set_irq_handler(IRQ_NFCON, do_level_IRQ); + set_irq_flags(IRQ_NFCON, IRQF_VALID); + + /* add new chained handler for wdt, ac7 */ + + set_irq_chip(IRQ_WDT, &s3c_irq_level_chip); + set_irq_handler(IRQ_WDT, do_level_IRQ); + set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); + + for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) { + set_irq_chip(irqno, &s3c_irq_wdtac97); + set_irq_handler(irqno, do_level_IRQ); + set_irq_flags(irqno, IRQF_VALID); + } + + /* add chained handler for camera */ + + set_irq_chip(IRQ_CAM, &s3c_irq_level_chip); + set_irq_handler(IRQ_CAM, do_level_IRQ); + set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam); + + for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { + set_irq_chip(irqno, &s3c_irq_cam); + set_irq_handler(irqno, do_level_IRQ); + set_irq_flags(irqno, IRQF_VALID); + } + + return 0; +} + +static struct sysdev_driver s3c2440_irq_driver = { + .add = s3c2440_irq_add, +}; + +static int s3c24xx_irq_driver(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver); +} + +arch_initcall(s3c24xx_irq_driver); + diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c index 179f0e031af4..765a3a9ae032 100644 --- a/arch/arm/mach-s3c2410/time.c +++ b/arch/arm/mach-s3c2410/time.c @@ -137,8 +137,8 @@ s3c2410_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction s3c2410_timer_irq = { .name = "S3C2410 Timer Tick", - .flags = SA_INTERRUPT, - .handler = s3c2410_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = s3c2410_timer_interrupt, }; /* diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index bedf88fafe08..4d4d303ee3a8 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -431,11 +431,13 @@ static void __init assabet_map_io(void) MACHINE_START(ASSABET, "Intel-Assabet") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - FIXUP(fixup_assabet) - MAPIO(assabet_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .fixup = fixup_assabet, + .map_io = assabet_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = assabet_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index 6a60b497ab42..b6169cb09196 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -285,9 +285,11 @@ static void __init badge4_map_io(void) } MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(badge4_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = badge4_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, MACHINE_END diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index f8edde5e7cbf..0aa918e24c31 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -123,10 +123,12 @@ static void __init cerf_init(void) } MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube") - MAINTAINER("support@intrinsyc.com") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - MAPIO(cerf_map_io) - INITIRQ(cerf_init_irq) + /* Maintainer: support@intrinsyc.com */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .map_io = cerf_map_io, + .init_irq = cerf_init_irq, .timer = &sa1100_timer, .init_machine = cerf_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 99287890d396..8cb69113a57c 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -184,9 +184,11 @@ static void __init collie_map_io(void) } MACHINE_START(COLLIE, "Sharp-Collie") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - MAPIO(collie_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .map_io = collie_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = collie_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c index 8d2a89a2ea01..04c94ab6c18b 100644 --- a/arch/arm/mach-sa1100/cpu-sa1110.c +++ b/arch/arm/mach-sa1100/cpu-sa1110.c @@ -271,8 +271,7 @@ static int sa1110_target(struct cpufreq_policy *policy, */ sdram_set_refresh(2); if (!irqs_disabled()) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(20 * HZ / 1000); + msleep(20); } else { mdelay(20); } diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 84c86543501a..e7aa2681ca64 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -380,10 +380,12 @@ static void __init h3100_map_io(void) } MACHINE_START(H3100, "Compaq iPAQ H3100") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(h3100_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = h3100_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = h3xxx_mach_init, MACHINE_END @@ -496,10 +498,12 @@ static void __init h3600_map_io(void) } MACHINE_START(H3600, "Compaq iPAQ H3600") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(h3600_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = h3600_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = h3xxx_mach_init, MACHINE_END @@ -727,7 +731,7 @@ static void h3800_IRQ_demux(unsigned int irq, struct irqdesc *desc, struct pt_re static struct irqaction h3800_irq = { .name = "h3800_asic", .handler = h3800_IRQ_demux, - .flags = SA_INTERRUPT, + .flags = SA_INTERRUPT | SA_TIMER, }; u32 kpio_int_shadow = 0; @@ -881,10 +885,12 @@ static void __init h3800_map_io(void) } MACHINE_START(H3800, "Compaq iPAQ H3800") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(h3800_map_io) - INITIRQ(h3800_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = h3800_map_io, + .init_irq = h3800_init_irq, .timer = &sa1100_timer, .init_machine = h3xxx_mach_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index 570841779714..502d65cfe654 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -191,10 +191,12 @@ static void __init hackkit_init(void) */ MACHINE_START(HACKKIT, "HackKit Cpu Board") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(hackkit_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = hackkit_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = hackkit_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 6be78291a878..2f497112c96a 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -97,9 +97,12 @@ static void __init jornada720_map_io(void) } MACHINE_START(JORNADA720, "HP Jornada 720") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(jornada720_map_io) - INITIRQ(sa1100_init_irq) + /* Maintainer: Michael Gernoth <michael@gernoth.net> */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = jornada720_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, MACHINE_END diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 51c08ccfb8db..870b488aeda4 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -41,9 +41,11 @@ static void __init lart_map_io(void) } MACHINE_START(LART, "LART") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(lart_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = lart_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, MACHINE_END diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 5606bd71b024..e17b58fb9c9c 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -146,9 +146,11 @@ static void __init pleb_map_io(void) } MACHINE_START(PLEB, "PLEB") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - MAPIO(pleb_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .map_io = pleb_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = pleb_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index edddd559be02..43a00359fcdd 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -76,10 +76,12 @@ static void __init shannon_map_io(void) } MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(shannon_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = shannon_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = shannon_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 8d113d629867..77978586b126 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -215,10 +215,12 @@ arch_initcall(simpad_init); MACHINE_START(SIMPAD, "Simpad") - MAINTAINER("Holger Freyther") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(simpad_map_io) - INITIRQ(sa1100_init_irq) + /* Maintainer: Holger Freyther */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = simpad_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, MACHINE_END diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 19b0c0fd6377..0eeb3616ffea 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -99,8 +99,8 @@ sa1100_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction sa1100_timer_irq = { .name = "SA11xx Timer Tick", - .flags = SA_INTERRUPT, - .handler = sa1100_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = sa1100_timer_interrupt, }; static void __init sa1100_timer_init(void) diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index a9bc5d0dbd85..e737eae4521f 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -24,7 +24,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .iobase = 0x3f8, .irq = 4, .uartclk = 1843200, - .regshift = 2, + .regshift = 0, .iotype = UPIO_PORT, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, }, @@ -32,7 +32,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .iobase = 0x2f8, .irq = 3, .uartclk = 1843200, - .regshift = 2, + .regshift = 0, .iotype = UPIO_PORT, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, }, @@ -84,8 +84,8 @@ shark_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction shark_timer_irq = { .name = "Shark Timer Tick", - .flags = SA_INTERRUPT, - .handler = shark_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = shark_timer_interrupt, }; /* @@ -105,10 +105,12 @@ static struct sys_timer shark_timer = { }; MACHINE_START(SHARK, "Shark") - MAINTAINER("Alexander Schulz") - BOOT_MEM(0x08000000, 0x40000000, 0xe0000000) - BOOT_PARAMS(0x08003000) - MAPIO(shark_map_io) - INITIRQ(shark_init_irq) + /* Maintainer: Alexander Schulz */ + .phys_ram = 0x08000000, + .phys_io = 0x40000000, + .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, + .boot_params = 0x08003000, + .map_io = shark_map_io, + .init_irq = shark_init_irq, .timer = &shark_timer, MACHINE_END diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 6a7cbea5e098..f01c0f8a2bb3 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -33,6 +33,7 @@ #include <asm/mach-types.h> #include <asm/hardware/amba.h> #include <asm/hardware/amba_clcd.h> +#include <asm/hardware/arm_timer.h> #include <asm/hardware/icst307.h> #include <asm/mach/arch.h> @@ -788,38 +789,25 @@ void __init versatile_init(void) */ #define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) #if TIMER_INTERVAL >= 0x100000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 8) /* Divide by 256 */ -#define TIMER_CTRL 0x88 /* Enable, Clock / 256 */ +#define TIMER_RELOAD (TIMER_INTERVAL >> 8) +#define TIMER_DIVISOR (TIMER_CTRL_DIV256) #define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) #elif TIMER_INTERVAL >= 0x10000 #define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */ -#define TIMER_CTRL 0x84 /* Enable, Clock / 16 */ +#define TIMER_DIVISOR (TIMER_CTRL_DIV16) #define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) #else #define TIMER_RELOAD (TIMER_INTERVAL) -#define TIMER_CTRL 0x80 /* Enable */ +#define TIMER_DIVISOR (TIMER_CTRL_DIV1) #define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) #endif -#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable */ - -/* - * What does it look like? - */ -typedef struct TimerStruct { - unsigned long TimerLoad; - unsigned long TimerValue; - unsigned long TimerControl; - unsigned long TimerClear; -} TimerStruct_t; - /* * Returns number of ms since last clock interrupt. Note that interrupts * will have been disabled by do_gettimeoffset() */ static unsigned long versatile_gettimeoffset(void) { - volatile TimerStruct_t *timer0 = (TimerStruct_t *)TIMER0_VA_BASE; unsigned long ticks1, ticks2, status; /* @@ -828,11 +816,11 @@ static unsigned long versatile_gettimeoffset(void) * an interrupt. We get around this by ensuring that the * counter has not reloaded between our two reads. */ - ticks2 = timer0->TimerValue & 0xffff; + ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; do { ticks1 = ticks2; status = __raw_readl(VA_IC_BASE + VIC_IRQ_RAW_STATUS); - ticks2 = timer0->TimerValue & 0xffff; + ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; } while (ticks2 > ticks1); /* @@ -859,12 +847,10 @@ static unsigned long versatile_gettimeoffset(void) */ static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE; - write_seqlock(&xtime_lock); // ...clear the interrupt - timer0->TimerClear = 1; + writel(1, TIMER0_VA_BASE + TIMER_INTCLR); timer_tick(regs); @@ -875,8 +861,8 @@ static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_re static struct irqaction versatile_timer_irq = { .name = "Versatile Timer Tick", - .flags = SA_INTERRUPT, - .handler = versatile_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = versatile_timer_interrupt, }; /* @@ -884,31 +870,32 @@ static struct irqaction versatile_timer_irq = { */ static void __init versatile_timer_init(void) { - volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE; - volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE; - volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE; - volatile TimerStruct_t *timer3 = (volatile TimerStruct_t *)TIMER3_VA_BASE; + u32 val; /* * set clock frequency: * VERSATILE_REFCLK is 32KHz * VERSATILE_TIMCLK is 1MHz */ - *(volatile unsigned int *)IO_ADDRESS(VERSATILE_SCTL_BASE) |= - ((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel)); + val = readl(IO_ADDRESS(VERSATILE_SCTL_BASE)); + writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val, + IO_ADDRESS(VERSATILE_SCTL_BASE)); /* * Initialise to a known state (all timers off) */ - timer0->TimerControl = 0; - timer1->TimerControl = 0; - timer2->TimerControl = 0; - timer3->TimerControl = 0; - - timer0->TimerLoad = TIMER_RELOAD; - timer0->TimerValue = TIMER_RELOAD; - timer0->TimerControl = TIMER_CTRL | 0x40 | TIMER_CTRL_IE; /* periodic + IE */ + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); + writel(0, TIMER3_VA_BASE + TIMER_CTRL); + + writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD); + writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE); + writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC | + TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL); /* * Make irqs happen for the system timer diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c index d332084586cf..8b0b3bef24ae 100644 --- a/arch/arm/mach-versatile/versatile_ab.c +++ b/arch/arm/mach-versatile/versatile_ab.c @@ -35,11 +35,13 @@ #include "core.h" MACHINE_START(VERSATILE_AB, "ARM-Versatile AB") - MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd") - BOOT_MEM(0x00000000, 0x101f1000, 0xf11f1000) - BOOT_PARAMS(0x00000100) - MAPIO(versatile_map_io) - INITIRQ(versatile_init_irq) + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0x00000000, + .phys_io = 0x101f1000, + .io_pg_offst = ((0xf11f1000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = versatile_map_io, + .init_irq = versatile_init_irq, .timer = &versatile_timer, - INIT_MACHINE(versatile_init) + .init_machine = versatile_init, MACHINE_END diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index 2702099a68f3..7c3078c38916 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -99,11 +99,13 @@ static int __init versatile_pb_init(void) arch_initcall(versatile_pb_init); MACHINE_START(VERSATILE_PB, "ARM-Versatile PB") - MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd") - BOOT_MEM(0x00000000, 0x101f1000, 0xf11f1000) - BOOT_PARAMS(0x00000100) - MAPIO(versatile_map_io) - INITIRQ(versatile_init_irq) + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0x00000000, + .phys_io = 0x101f1000, + .io_pg_offst = ((0xf11f1000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = versatile_map_io, + .init_irq = versatile_init_irq, .timer = &versatile_timer, - INIT_MACHINE(versatile_init) + .init_machine = versatile_init, MACHINE_END diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 95606b4a3ba6..afbbeb6f4658 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -101,7 +101,7 @@ config CPU_ARM922T # ARM925T config CPU_ARM925T - bool "Support ARM925T processor" if ARCH_OMAP + bool "Support ARM925T processor" if ARCH_OMAP1 depends on ARCH_OMAP1510 default y if ARCH_OMAP1510 select CPU_32v4 diff --git a/arch/arm/mm/blockops.c b/arch/arm/mm/blockops.c index 806c6eeb1b0c..4f5ee2d08996 100644 --- a/arch/arm/mm/blockops.c +++ b/arch/arm/mm/blockops.c @@ -25,13 +25,14 @@ blk_flush_kern_dcache_page(void *kaddr) { asm( "add r1, r0, %0 \n\ + sub r1, r1, %1 \n\ 1: .word 0xec401f0e @ mcrr p15, 0, r0, r1, c14, 0 @ blocking \n\ mov r0, #0 \n\ mcr p15, 0, r0, c7, c5, 0 \n\ mcr p15, 0, r0, c7, c10, 4 \n\ mov pc, lr" : - : "I" (PAGE_SIZE)); + : "I" (PAGE_SIZE), "I" (L1_CACHE_BYTES)); } /* diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index e25b4fd8412c..0b6c4db44e08 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -238,9 +238,9 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) up_read(&mm->mmap_sem); /* - * Handle the "normal" case first + * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR */ - if (fault > 0) + if (fault >= VM_FAULT_MINOR) return 0; /* @@ -261,7 +261,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) do_exit(SIGKILL); return 0; - case 0: + case VM_FAULT_SIGBUS: /* * We had some memory, but were unable to * successfully fix up this page fault. @@ -372,49 +372,50 @@ do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs) static struct fsr_info { int (*fn)(unsigned long addr, unsigned int fsr, struct pt_regs *regs); int sig; + int code; const char *name; } fsr_info[] = { /* * The following are the standard ARMv3 and ARMv4 aborts. ARMv5 * defines these to be "precise" aborts. */ - { do_bad, SIGSEGV, "vector exception" }, - { do_bad, SIGILL, "alignment exception" }, - { do_bad, SIGKILL, "terminal exception" }, - { do_bad, SIGILL, "alignment exception" }, - { do_bad, SIGBUS, "external abort on linefetch" }, - { do_translation_fault, SIGSEGV, "section translation fault" }, - { do_bad, SIGBUS, "external abort on linefetch" }, - { do_page_fault, SIGSEGV, "page translation fault" }, - { do_bad, SIGBUS, "external abort on non-linefetch" }, - { do_bad, SIGSEGV, "section domain fault" }, - { do_bad, SIGBUS, "external abort on non-linefetch" }, - { do_bad, SIGSEGV, "page domain fault" }, - { do_bad, SIGBUS, "external abort on translation" }, - { do_sect_fault, SIGSEGV, "section permission fault" }, - { do_bad, SIGBUS, "external abort on translation" }, - { do_page_fault, SIGSEGV, "page permission fault" }, + { do_bad, SIGSEGV, 0, "vector exception" }, + { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, + { do_bad, SIGKILL, 0, "terminal exception" }, + { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, + { do_bad, SIGBUS, 0, "external abort on linefetch" }, + { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" }, + { do_bad, SIGBUS, 0, "external abort on linefetch" }, + { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" }, + { do_bad, SIGBUS, 0, "external abort on non-linefetch" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" }, + { do_bad, SIGBUS, 0, "external abort on non-linefetch" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" }, + { do_bad, SIGBUS, 0, "external abort on translation" }, + { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" }, + { do_bad, SIGBUS, 0, "external abort on translation" }, + { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" }, /* * The following are "imprecise" aborts, which are signalled by bit * 10 of the FSR, and may not be recoverable. These are only * supported if the CPU abort handler supports bit 10. */ - { do_bad, SIGBUS, "unknown 16" }, - { do_bad, SIGBUS, "unknown 17" }, - { do_bad, SIGBUS, "unknown 18" }, - { do_bad, SIGBUS, "unknown 19" }, - { do_bad, SIGBUS, "lock abort" }, /* xscale */ - { do_bad, SIGBUS, "unknown 21" }, - { do_bad, SIGBUS, "imprecise external abort" }, /* xscale */ - { do_bad, SIGBUS, "unknown 23" }, - { do_bad, SIGBUS, "dcache parity error" }, /* xscale */ - { do_bad, SIGBUS, "unknown 25" }, - { do_bad, SIGBUS, "unknown 26" }, - { do_bad, SIGBUS, "unknown 27" }, - { do_bad, SIGBUS, "unknown 28" }, - { do_bad, SIGBUS, "unknown 29" }, - { do_bad, SIGBUS, "unknown 30" }, - { do_bad, SIGBUS, "unknown 31" } + { do_bad, SIGBUS, 0, "unknown 16" }, + { do_bad, SIGBUS, 0, "unknown 17" }, + { do_bad, SIGBUS, 0, "unknown 18" }, + { do_bad, SIGBUS, 0, "unknown 19" }, + { do_bad, SIGBUS, 0, "lock abort" }, /* xscale */ + { do_bad, SIGBUS, 0, "unknown 21" }, + { do_bad, SIGBUS, BUS_OBJERR, "imprecise external abort" }, /* xscale */ + { do_bad, SIGBUS, 0, "unknown 23" }, + { do_bad, SIGBUS, 0, "dcache parity error" }, /* xscale */ + { do_bad, SIGBUS, 0, "unknown 25" }, + { do_bad, SIGBUS, 0, "unknown 26" }, + { do_bad, SIGBUS, 0, "unknown 27" }, + { do_bad, SIGBUS, 0, "unknown 28" }, + { do_bad, SIGBUS, 0, "unknown 29" }, + { do_bad, SIGBUS, 0, "unknown 30" }, + { do_bad, SIGBUS, 0, "unknown 31" } }; void __init @@ -435,15 +436,19 @@ asmlinkage void do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { const struct fsr_info *inf = fsr_info + (fsr & 15) + ((fsr & (1 << 10)) >> 6); + struct siginfo info; if (!inf->fn(addr, fsr, regs)) return; printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n", inf->name, fsr, addr); - force_sig(inf->sig, current); - show_pte(current->mm, addr); - die_if_kernel("Oops", regs, 0); + + info.si_signo = inf->sig; + info.si_errno = 0; + info.si_code = inf->code; + info.si_addr = (void __user *)addr; + notify_die("", regs, &info, fsr, 0); } asmlinkage void diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 72a2b8cee319..edffa47a4b2a 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -93,14 +93,7 @@ struct node_info { }; #define O_PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define V_PFN_DOWN(x) O_PFN_DOWN(__pa(x)) - #define O_PFN_UP(x) (PAGE_ALIGN(x) >> PAGE_SHIFT) -#define V_PFN_UP(x) O_PFN_UP(__pa(x)) - -#define PFN_SIZE(x) ((x) >> PAGE_SHIFT) -#define PFN_RANGE(s,e) PFN_SIZE(PAGE_ALIGN((unsigned long)(e)) - \ - (((unsigned long)(s)) & PAGE_MASK)) /* * FIXME: We really want to avoid allocating the bootmap bitmap @@ -113,7 +106,7 @@ find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages) { unsigned int start_pfn, bank, bootmap_pfn; - start_pfn = V_PFN_UP(&_end); + start_pfn = O_PFN_UP(__pa(&_end)); bootmap_pfn = 0; for (bank = 0; bank < mi->nr_banks; bank ++) { @@ -122,9 +115,9 @@ find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages) if (mi->bank[bank].node != node) continue; - start = O_PFN_UP(mi->bank[bank].start); - end = O_PFN_DOWN(mi->bank[bank].size + - mi->bank[bank].start); + start = mi->bank[bank].start >> PAGE_SHIFT; + end = (mi->bank[bank].size + + mi->bank[bank].start) >> PAGE_SHIFT; if (end < start_pfn) continue; @@ -191,8 +184,8 @@ find_memend_and_nodes(struct meminfo *mi, struct node_info *np) /* * Get the start and end pfns for this bank */ - start = O_PFN_UP(mi->bank[i].start); - end = O_PFN_DOWN(mi->bank[i].start + mi->bank[i].size); + start = mi->bank[i].start >> PAGE_SHIFT; + end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT; if (np[node].start > start) np[node].start = start; @@ -444,7 +437,7 @@ void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) memtable_init(mi); if (mdesc->map_io) mdesc->map_io(); - flush_tlb_all(); + local_flush_tlb_all(); /* * initialise the zones within each node @@ -529,6 +522,69 @@ static inline void free_area(unsigned long addr, unsigned long end, char *s) printk(KERN_INFO "Freeing %s memory: %dK\n", s, size); } +static inline void +free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn) +{ + struct page *start_pg, *end_pg; + unsigned long pg, pgend; + + /* + * Convert start_pfn/end_pfn to a struct page pointer. + */ + start_pg = pfn_to_page(start_pfn); + end_pg = pfn_to_page(end_pfn); + + /* + * Convert to physical addresses, and + * round start upwards and end downwards. + */ + pg = PAGE_ALIGN(__pa(start_pg)); + pgend = __pa(end_pg) & PAGE_MASK; + + /* + * If there are free pages between these, + * free the section of the memmap array. + */ + if (pg < pgend) + free_bootmem_node(NODE_DATA(node), pg, pgend - pg); +} + +/* + * The mem_map array can get very big. Free the unused area of the memory map. + */ +static void __init free_unused_memmap_node(int node, struct meminfo *mi) +{ + unsigned long bank_start, prev_bank_end = 0; + unsigned int i; + + /* + * [FIXME] This relies on each bank being in address order. This + * may not be the case, especially if the user has provided the + * information on the command line. + */ + for (i = 0; i < mi->nr_banks; i++) { + if (mi->bank[i].size == 0 || mi->bank[i].node != node) + continue; + + bank_start = mi->bank[i].start >> PAGE_SHIFT; + if (bank_start < prev_bank_end) { + printk(KERN_ERR "MEM: unordered memory banks. " + "Not freeing memmap.\n"); + break; + } + + /* + * If we had a previous bank, and there is a space + * between the current bank and the previous, free it. + */ + if (prev_bank_end && prev_bank_end != bank_start) + free_memmap(node, prev_bank_end, bank_start); + + prev_bank_end = (mi->bank[i].start + + mi->bank[i].size) >> PAGE_SHIFT; + } +} + /* * mem_init() marks the free areas in the mem_map and tells us how much * memory is free. This is done after various parts of the system have @@ -547,16 +603,12 @@ void __init mem_init(void) max_mapnr = virt_to_page(high_memory) - mem_map; #endif - /* - * We may have non-contiguous memory. - */ - if (meminfo.nr_banks != 1) - create_memmap_holes(&meminfo); - /* this will put all unused low memory onto the freelists */ for_each_online_node(node) { pg_data_t *pgdat = NODE_DATA(node); + free_unused_memmap_node(node, &meminfo); + if (pgdat->node_spanned_pages != 0) totalram_pages += free_all_bootmem_node(pgdat); } diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index 2c2b93d77d43..e33fe4229d05 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -169,7 +169,14 @@ pgd_t *get_pgd_slow(struct mm_struct *mm) memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t)); + /* + * Copy over the kernel and IO PGD entries + */ init_pgd = pgd_offset_k(0); + memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR, + (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t)); + + clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t)); if (!vectors_high()) { /* @@ -198,14 +205,6 @@ pgd_t *get_pgd_slow(struct mm_struct *mm) spin_unlock(&mm->page_table_lock); } - /* - * Copy over the kernel and IO PGD entries - */ - memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR, - (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t)); - - clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t)); - return new_pgd; no_pte: @@ -400,7 +399,7 @@ static void __init build_mem_type_table(void) ecc_mask = 0; } - if (cpu_arch <= CPU_ARCH_ARMv5) { + if (cpu_arch <= CPU_ARCH_ARMv5TEJ) { for (i = 0; i < ARRAY_SIZE(mem_types); i++) { if (mem_types[i].prot_l1) mem_types[i].prot_l1 |= PMD_BIT4; @@ -426,6 +425,9 @@ static void __init build_mem_type_table(void) mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; + + mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE; + mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED; } cp = &cache_policies[cachepolicy]; @@ -585,7 +587,7 @@ void setup_mm_for_reboot(char mode) pmdval = (i << PGDIR_SHIFT) | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT; - if (cpu_arch <= CPU_ARCH_ARMv5) + if (cpu_arch <= CPU_ARCH_ARMv5TEJ) pmdval |= PMD_BIT4; pmd = pmd_off(pgd, i << PGDIR_SHIFT); pmd[0] = __pmd(pmdval); @@ -683,7 +685,7 @@ void __init memtable_init(struct meminfo *mi) } flush_cache_all(); - flush_tlb_all(); + local_flush_tlb_all(); top_pmd = pmd_off_k(0xffff0000); } @@ -698,75 +700,3 @@ void __init iotable_init(struct map_desc *io_desc, int nr) for (i = 0; i < nr; i++) create_mapping(io_desc + i); } - -static inline void -free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn) -{ - struct page *start_pg, *end_pg; - unsigned long pg, pgend; - - /* - * Convert start_pfn/end_pfn to a struct page pointer. - */ - start_pg = pfn_to_page(start_pfn); - end_pg = pfn_to_page(end_pfn); - - /* - * Convert to physical addresses, and - * round start upwards and end downwards. - */ - pg = PAGE_ALIGN(__pa(start_pg)); - pgend = __pa(end_pg) & PAGE_MASK; - - /* - * If there are free pages between these, - * free the section of the memmap array. - */ - if (pg < pgend) - free_bootmem_node(NODE_DATA(node), pg, pgend - pg); -} - -static inline void free_unused_memmap_node(int node, struct meminfo *mi) -{ - unsigned long bank_start, prev_bank_end = 0; - unsigned int i; - - /* - * [FIXME] This relies on each bank being in address order. This - * may not be the case, especially if the user has provided the - * information on the command line. - */ - for (i = 0; i < mi->nr_banks; i++) { - if (mi->bank[i].size == 0 || mi->bank[i].node != node) - continue; - - bank_start = mi->bank[i].start >> PAGE_SHIFT; - if (bank_start < prev_bank_end) { - printk(KERN_ERR "MEM: unordered memory banks. " - "Not freeing memmap.\n"); - break; - } - - /* - * If we had a previous bank, and there is a space - * between the current bank and the previous, free it. - */ - if (prev_bank_end && prev_bank_end != bank_start) - free_memmap(node, prev_bank_end, bank_start); - - prev_bank_end = PAGE_ALIGN(mi->bank[i].start + - mi->bank[i].size) >> PAGE_SHIFT; - } -} - -/* - * The mem_map array can get very big. Free - * the unused area of the memory map. - */ -void __init create_memmap_holes(struct meminfo *mi) -{ - int node; - - for_each_online_node(node) - free_unused_memmap_node(node, mi); -} diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 1f325231b9e4..5c0ae5260d1c 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -445,14 +445,14 @@ __arm1020_setup: /* * R * .RVI ZFRS BLDP WCAM - * .0.1 1001 ..11 0101 /* FIXME: why no V bit? */ + * .011 1001 ..11 0101 */ .type arm1020_cr1_clear, #object .type arm1020_cr1_set, #object arm1020_cr1_clear: .word 0x593f arm1020_cr1_set: - .word 0x1935 + .word 0x3935 __INITDATA diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 142a2c2d6f0b..d69389c4d4ba 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -427,14 +427,14 @@ __arm1020e_setup: /* * R * .RVI ZFRS BLDP WCAM - * .0.1 1001 ..11 0101 /* FIXME: why no V bit? */ + * .011 1001 ..11 0101 */ .type arm1020e_cr1_clear, #object .type arm1020e_cr1_set, #object arm1020e_cr1_clear: .word 0x5f3f arm1020e_cr1_set: - .word 0x1935 + .word 0x3935 __INITDATA diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 0aa73d414783..352db98ee269 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -132,8 +132,8 @@ ENTRY(cpu_v6_switch_mm) * 100x 1 0 1 r/o no acc * 10x0 1 0 1 r/o no acc * 1011 0 0 1 r/w no acc - * 110x 1 1 0 r/o r/o - * 11x0 1 1 0 r/o r/o + * 110x 0 1 0 r/w r/o + * 11x0 0 1 0 r/w r/o * 1111 0 1 1 r/w r/w */ ENTRY(cpu_v6_set_pte) @@ -150,7 +150,7 @@ ENTRY(cpu_v6_set_pte) tst r1, #L_PTE_USER orrne r2, r2, #AP1 | nG tstne r2, #APX - eorne r2, r2, #AP0 + bicne r2, r2, #APX | AP0 tst r1, #L_PTE_YOUNG biceq r2, r2, #APX | AP1 | AP0 @@ -200,7 +200,7 @@ __v6_setup: mcr p15, 0, r4, c2, c0, 1 @ load TTB1 #ifdef CONFIG_VFP mrc p15, 0, r0, c1, c0, 2 - orr r0, r0, #(3 << 20) + orr r0, r0, #(0xf << 20) mcr p15, 0, r0, c1, c0, 2 @ Enable full access to VFP #endif mrc p15, 0, r0, c1, c0, 0 @ read control register diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 2d977b4eeeab..b88de2700146 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -370,142 +370,6 @@ ENTRY(cpu_xscale_dcache_clean_area) bhi 1b mov pc, lr -/* ================================ CACHE LOCKING============================ - * - * The XScale MicroArchitecture implements support for locking entries into - * the data and instruction cache. The following functions implement the core - * low level instructions needed to accomplish the locking. The developer's - * manual states that the code that performs the locking must be in non-cached - * memory. To accomplish this, the code in xscale-cache-lock.c copies the - * following functions from the cache into a non-cached memory region that - * is allocated through consistent_alloc(). - * - */ - .align 5 -/* - * xscale_icache_lock - * - * r0: starting address to lock - * r1: end address to lock - */ -ENTRY(xscale_icache_lock) - -iLockLoop: - bic r0, r0, #CACHELINESIZE - 1 - mcr p15, 0, r0, c9, c1, 0 @ lock into cache - cmp r0, r1 @ are we done? - add r0, r0, #CACHELINESIZE @ advance to next cache line - bls iLockLoop - mov pc, lr - -/* - * xscale_icache_unlock - */ -ENTRY(xscale_icache_unlock) - mcr p15, 0, r0, c9, c1, 1 @ Unlock icache - mov pc, lr - -/* - * xscale_dcache_lock - * - * r0: starting address to lock - * r1: end address to lock - */ -ENTRY(xscale_dcache_lock) - mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov r2, #1 - mcr p15, 0, r2, c9, c2, 0 @ Put dcache in lock mode - cpwait ip @ Wait for completion - - mrs r2, cpsr - orr r3, r2, #PSR_F_BIT | PSR_I_BIT -dLockLoop: - msr cpsr_c, r3 - mcr p15, 0, r0, c7, c10, 1 @ Write back line if it is dirty - mcr p15, 0, r0, c7, c6, 1 @ Flush/invalidate line - msr cpsr_c, r2 - ldr ip, [r0], #CACHELINESIZE @ Preload 32 bytes into cache from - @ location [r0]. Post-increment - @ r3 to next cache line - cmp r0, r1 @ Are we done? - bls dLockLoop - - mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov r2, #0 - mcr p15, 0, r2, c9, c2, 0 @ Get out of lock mode - cpwait_ret lr, ip - -/* - * xscale_dcache_unlock - */ -ENTRY(xscale_dcache_unlock) - mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer - mcr p15, 0, ip, c9, c2, 1 @ Unlock cache - mov pc, lr - -/* - * Needed to determine the length of the code that needs to be copied. - */ - .align 5 -ENTRY(xscale_cache_dummy) - mov pc, lr - -/* ================================ TLB LOCKING============================== - * - * The XScale MicroArchitecture implements support for locking entries into - * the Instruction and Data TLBs. The following functions provide the - * low level support for supporting these under Linux. xscale-lock.c - * implements some higher level management code. Most of the following - * is taken straight out of the Developer's Manual. - */ - -/* - * Lock I-TLB entry - * - * r0: Virtual address to translate and lock - */ - .align 5 -ENTRY(xscale_itlb_lock) - mrs r2, cpsr - orr r3, r2, #PSR_F_BIT | PSR_I_BIT - msr cpsr_c, r3 @ Disable interrupts - mcr p15, 0, r0, c8, c5, 1 @ Invalidate I-TLB entry - mcr p15, 0, r0, c10, c4, 0 @ Translate and lock - msr cpsr_c, r2 @ Restore interrupts - cpwait_ret lr, ip - -/* - * Lock D-TLB entry - * - * r0: Virtual address to translate and lock - */ - .align 5 -ENTRY(xscale_dtlb_lock) - mrs r2, cpsr - orr r3, r2, #PSR_F_BIT | PSR_I_BIT - msr cpsr_c, r3 @ Disable interrupts - mcr p15, 0, r0, c8, c6, 1 @ Invalidate D-TLB entry - mcr p15, 0, r0, c10, c8, 0 @ Translate and lock - msr cpsr_c, r2 @ Restore interrupts - cpwait_ret lr, ip - -/* - * Unlock all I-TLB entries - */ - .align 5 -ENTRY(xscale_itlb_unlock) - mcr p15, 0, ip, c10, c4, 1 @ Unlock I-TLB - mcr p15, 0, ip, c8, c5, 0 @ Invalidate I-TLB - cpwait_ret lr, ip - -/* - * Unlock all D-TLB entries - */ -ENTRY(xscale_dtlb_unlock) - mcr p15, 0, ip, c10, c8, 1 @ Unlock D-TBL - mcr p15, 0, ip, c8, c6, 0 @ Invalidate D-TLB - cpwait_ret lr, ip - /* =============================== PageTable ============================== */ #define PTE_CACHE_WRITE_ALLOCATE 0 diff --git a/arch/arm/nwfpe/double_cpdo.c b/arch/arm/nwfpe/double_cpdo.c index 7ffd8cb9bc96..c51d1386a97c 100644 --- a/arch/arm/nwfpe/double_cpdo.c +++ b/arch/arm/nwfpe/double_cpdo.c @@ -40,17 +40,17 @@ float64 float64_arccos(float64 rFm); float64 float64_pow(float64 rFn, float64 rFm); float64 float64_pol(float64 rFn, float64 rFm); -static float64 float64_rsf(float64 rFn, float64 rFm) +static float64 float64_rsf(struct roundingData *roundData, float64 rFn, float64 rFm) { - return float64_sub(rFm, rFn); + return float64_sub(roundData, rFm, rFn); } -static float64 float64_rdv(float64 rFn, float64 rFm) +static float64 float64_rdv(struct roundingData *roundData, float64 rFn, float64 rFm) { - return float64_div(rFm, rFn); + return float64_div(roundData, rFm, rFn); } -static float64 (*const dyadic_double[16])(float64 rFn, float64 rFm) = { +static float64 (*const dyadic_double[16])(struct roundingData*, float64 rFn, float64 rFm) = { [ADF_CODE >> 20] = float64_add, [MUF_CODE >> 20] = float64_mul, [SUF_CODE >> 20] = float64_sub, @@ -65,12 +65,12 @@ static float64 (*const dyadic_double[16])(float64 rFn, float64 rFm) = { [FRD_CODE >> 20] = float64_rdv, }; -static float64 float64_mvf(float64 rFm) +static float64 float64_mvf(struct roundingData *roundData,float64 rFm) { return rFm; } -static float64 float64_mnf(float64 rFm) +static float64 float64_mnf(struct roundingData *roundData,float64 rFm) { union float64_components u; @@ -84,7 +84,7 @@ static float64 float64_mnf(float64 rFm) return u.f64; } -static float64 float64_abs(float64 rFm) +static float64 float64_abs(struct roundingData *roundData,float64 rFm) { union float64_components u; @@ -98,7 +98,7 @@ static float64 float64_abs(float64 rFm) return u.f64; } -static float64 (*const monadic_double[16])(float64 rFm) = { +static float64 (*const monadic_double[16])(struct roundingData *, float64 rFm) = { [MVF_CODE >> 20] = float64_mvf, [MNF_CODE >> 20] = float64_mnf, [ABS_CODE >> 20] = float64_abs, @@ -108,7 +108,7 @@ static float64 (*const monadic_double[16])(float64 rFm) = { [NRM_CODE >> 20] = float64_mvf, }; -unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd) +unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd) { FPA11 *fpa11 = GET_FPA11(); float64 rFm; @@ -151,13 +151,13 @@ unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd) } if (dyadic_double[opc_mask_shift]) { - rFd->fDouble = dyadic_double[opc_mask_shift](rFn, rFm); + rFd->fDouble = dyadic_double[opc_mask_shift](roundData, rFn, rFm); } else { return 0; } } else { if (monadic_double[opc_mask_shift]) { - rFd->fDouble = monadic_double[opc_mask_shift](rFm); + rFd->fDouble = monadic_double[opc_mask_shift](roundData, rFm); } else { return 0; } diff --git a/arch/arm/nwfpe/extended_cpdo.c b/arch/arm/nwfpe/extended_cpdo.c index c39f68a3449e..65a279ba927f 100644 --- a/arch/arm/nwfpe/extended_cpdo.c +++ b/arch/arm/nwfpe/extended_cpdo.c @@ -35,17 +35,17 @@ floatx80 floatx80_arccos(floatx80 rFm); floatx80 floatx80_pow(floatx80 rFn, floatx80 rFm); floatx80 floatx80_pol(floatx80 rFn, floatx80 rFm); -static floatx80 floatx80_rsf(floatx80 rFn, floatx80 rFm) +static floatx80 floatx80_rsf(struct roundingData *roundData, floatx80 rFn, floatx80 rFm) { - return floatx80_sub(rFm, rFn); + return floatx80_sub(roundData, rFm, rFn); } -static floatx80 floatx80_rdv(floatx80 rFn, floatx80 rFm) +static floatx80 floatx80_rdv(struct roundingData *roundData, floatx80 rFn, floatx80 rFm) { - return floatx80_div(rFm, rFn); + return floatx80_div(roundData, rFm, rFn); } -static floatx80 (*const dyadic_extended[16])(floatx80 rFn, floatx80 rFm) = { +static floatx80 (*const dyadic_extended[16])(struct roundingData*, floatx80 rFn, floatx80 rFm) = { [ADF_CODE >> 20] = floatx80_add, [MUF_CODE >> 20] = floatx80_mul, [SUF_CODE >> 20] = floatx80_sub, @@ -60,24 +60,24 @@ static floatx80 (*const dyadic_extended[16])(floatx80 rFn, floatx80 rFm) = { [FRD_CODE >> 20] = floatx80_rdv, }; -static floatx80 floatx80_mvf(floatx80 rFm) +static floatx80 floatx80_mvf(struct roundingData *roundData, floatx80 rFm) { return rFm; } -static floatx80 floatx80_mnf(floatx80 rFm) +static floatx80 floatx80_mnf(struct roundingData *roundData, floatx80 rFm) { rFm.high ^= 0x8000; return rFm; } -static floatx80 floatx80_abs(floatx80 rFm) +static floatx80 floatx80_abs(struct roundingData *roundData, floatx80 rFm) { rFm.high &= 0x7fff; return rFm; } -static floatx80 (*const monadic_extended[16])(floatx80 rFm) = { +static floatx80 (*const monadic_extended[16])(struct roundingData*, floatx80 rFm) = { [MVF_CODE >> 20] = floatx80_mvf, [MNF_CODE >> 20] = floatx80_mnf, [ABS_CODE >> 20] = floatx80_abs, @@ -87,7 +87,7 @@ static floatx80 (*const monadic_extended[16])(floatx80 rFm) = { [NRM_CODE >> 20] = floatx80_mvf, }; -unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd) +unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd) { FPA11 *fpa11 = GET_FPA11(); floatx80 rFm; @@ -138,13 +138,13 @@ unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd) } if (dyadic_extended[opc_mask_shift]) { - rFd->fExtended = dyadic_extended[opc_mask_shift](rFn, rFm); + rFd->fExtended = dyadic_extended[opc_mask_shift](roundData, rFn, rFm); } else { return 0; } } else { if (monadic_extended[opc_mask_shift]) { - rFd->fExtended = monadic_extended[opc_mask_shift](rFm); + rFd->fExtended = monadic_extended[opc_mask_shift](roundData, rFm); } else { return 0; } diff --git a/arch/arm/nwfpe/fpa11.c b/arch/arm/nwfpe/fpa11.c index bf61696865ec..7690f731ee87 100644 --- a/arch/arm/nwfpe/fpa11.c +++ b/arch/arm/nwfpe/fpa11.c @@ -51,48 +51,42 @@ static void resetFPA11(void) fpa11->fpsr = FP_EMULATOR | BIT_AC; } -void SetRoundingMode(const unsigned int opcode) +int8 SetRoundingMode(const unsigned int opcode) { switch (opcode & MASK_ROUNDING_MODE) { default: case ROUND_TO_NEAREST: - float_rounding_mode = float_round_nearest_even; - break; + return float_round_nearest_even; case ROUND_TO_PLUS_INFINITY: - float_rounding_mode = float_round_up; - break; + return float_round_up; case ROUND_TO_MINUS_INFINITY: - float_rounding_mode = float_round_down; - break; + return float_round_down; case ROUND_TO_ZERO: - float_rounding_mode = float_round_to_zero; - break; + return float_round_to_zero; } } -void SetRoundingPrecision(const unsigned int opcode) +int8 SetRoundingPrecision(const unsigned int opcode) { #ifdef CONFIG_FPE_NWFPE_XP switch (opcode & MASK_ROUNDING_PRECISION) { case ROUND_SINGLE: - floatx80_rounding_precision = 32; - break; + return 32; case ROUND_DOUBLE: - floatx80_rounding_precision = 64; - break; + return 64; case ROUND_EXTENDED: - floatx80_rounding_precision = 80; - break; + return 80; default: - floatx80_rounding_precision = 80; + return 80; } #endif + return 80; } void nwfpe_init_fpa(union fp_state *fp) @@ -103,8 +97,6 @@ void nwfpe_init_fpa(union fp_state *fp) #endif memset(fpa11, 0, sizeof(FPA11)); resetFPA11(); - SetRoundingMode(ROUND_TO_NEAREST); - SetRoundingPrecision(ROUND_EXTENDED); fpa11->initflag = 1; } diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h index 45cc65426a22..93523ae4b7a1 100644 --- a/arch/arm/nwfpe/fpa11.h +++ b/arch/arm/nwfpe/fpa11.h @@ -29,9 +29,7 @@ * stack+task struct. Use the same method as 'current' uses to * reach them. */ -register unsigned long *user_registers asm("sl"); - -#define GET_USERREG() (user_registers) +#define GET_USERREG() ((struct pt_regs *)(THREAD_START_SP + (unsigned long)current_thread_info()) - 1) #include <linux/config.h> #include <linux/thread_info.h> @@ -39,6 +37,13 @@ register unsigned long *user_registers asm("sl"); /* includes */ #include "fpsr.h" /* FP control and status register definitions */ #include "milieu.h" + +struct roundingData { + int8 mode; + int8 precision; + signed char exception; +}; + #include "softfloat.h" #define typeNone 0x00 @@ -86,8 +91,8 @@ typedef struct tagFPA11 { initialised. */ } FPA11; -extern void SetRoundingMode(const unsigned int); -extern void SetRoundingPrecision(const unsigned int); +extern int8 SetRoundingMode(const unsigned int); +extern int8 SetRoundingPrecision(const unsigned int); extern void nwfpe_init_fpa(union fp_state *fp); #endif diff --git a/arch/arm/nwfpe/fpa11_cpdo.c b/arch/arm/nwfpe/fpa11_cpdo.c index 1bea67437b6f..4a31dfd94068 100644 --- a/arch/arm/nwfpe/fpa11_cpdo.c +++ b/arch/arm/nwfpe/fpa11_cpdo.c @@ -24,15 +24,16 @@ #include "fpa11.h" #include "fpopcode.h" -unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd); -unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd); -unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd); +unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd); +unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd); +unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd); unsigned int EmulateCPDO(const unsigned int opcode) { FPA11 *fpa11 = GET_FPA11(); FPREG *rFd; unsigned int nType, nDest, nRc; + struct roundingData roundData; /* Get the destination size. If not valid let Linux perform an invalid instruction trap. */ @@ -40,7 +41,9 @@ unsigned int EmulateCPDO(const unsigned int opcode) if (typeNone == nDest) return 0; - SetRoundingMode(opcode); + roundData.mode = SetRoundingMode(opcode); + roundData.precision = SetRoundingPrecision(opcode); + roundData.exception = 0; /* Compare the size of the operands in Fn and Fm. Choose the largest size and perform operations in that size, @@ -63,14 +66,14 @@ unsigned int EmulateCPDO(const unsigned int opcode) switch (nType) { case typeSingle: - nRc = SingleCPDO(opcode, rFd); + nRc = SingleCPDO(&roundData, opcode, rFd); break; case typeDouble: - nRc = DoubleCPDO(opcode, rFd); + nRc = DoubleCPDO(&roundData, opcode, rFd); break; #ifdef CONFIG_FPE_NWFPE_XP case typeExtended: - nRc = ExtendedCPDO(opcode, rFd); + nRc = ExtendedCPDO(&roundData, opcode, rFd); break; #endif default: @@ -93,9 +96,9 @@ unsigned int EmulateCPDO(const unsigned int opcode) case typeSingle: { if (typeDouble == nType) - rFd->fSingle = float64_to_float32(rFd->fDouble); + rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble); else - rFd->fSingle = floatx80_to_float32(rFd->fExtended); + rFd->fSingle = floatx80_to_float32(&roundData, rFd->fExtended); } break; @@ -104,7 +107,7 @@ unsigned int EmulateCPDO(const unsigned int opcode) if (typeSingle == nType) rFd->fDouble = float32_to_float64(rFd->fSingle); else - rFd->fDouble = floatx80_to_float64(rFd->fExtended); + rFd->fDouble = floatx80_to_float64(&roundData, rFd->fExtended); } break; @@ -121,12 +124,15 @@ unsigned int EmulateCPDO(const unsigned int opcode) #else if (nDest != nType) { if (nDest == typeSingle) - rFd->fSingle = float64_to_float32(rFd->fDouble); + rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble); else rFd->fDouble = float32_to_float64(rFd->fSingle); } #endif } + if (roundData.exception) + float_raise(roundData.exception); + return nRc; } diff --git a/arch/arm/nwfpe/fpa11_cpdt.c b/arch/arm/nwfpe/fpa11_cpdt.c index 95fb63fa9d18..b0db5cbcc3b1 100644 --- a/arch/arm/nwfpe/fpa11_cpdt.c +++ b/arch/arm/nwfpe/fpa11_cpdt.c @@ -96,7 +96,7 @@ static inline void loadMultiple(const unsigned int Fn, const unsigned int __user } } -static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem) +static inline void storeSingle(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem) { FPA11 *fpa11 = GET_FPA11(); union { @@ -106,12 +106,12 @@ static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem) switch (fpa11->fType[Fn]) { case typeDouble: - val.f = float64_to_float32(fpa11->fpreg[Fn].fDouble); + val.f = float64_to_float32(roundData, fpa11->fpreg[Fn].fDouble); break; #ifdef CONFIG_FPE_NWFPE_XP case typeExtended: - val.f = floatx80_to_float32(fpa11->fpreg[Fn].fExtended); + val.f = floatx80_to_float32(roundData, fpa11->fpreg[Fn].fExtended); break; #endif @@ -122,7 +122,7 @@ static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem) put_user(val.i[0], pMem); } -static inline void storeDouble(const unsigned int Fn, unsigned int __user *pMem) +static inline void storeDouble(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem) { FPA11 *fpa11 = GET_FPA11(); union { @@ -137,7 +137,7 @@ static inline void storeDouble(const unsigned int Fn, unsigned int __user *pMem) #ifdef CONFIG_FPE_NWFPE_XP case typeExtended: - val.f = floatx80_to_float64(fpa11->fpreg[Fn].fExtended); + val.f = floatx80_to_float64(roundData, fpa11->fpreg[Fn].fExtended); break; #endif @@ -259,8 +259,11 @@ unsigned int PerformSTF(const unsigned int opcode) { unsigned int __user *pBase, *pAddress, *pFinal; unsigned int nRc = 1, write_back = WRITE_BACK(opcode); + struct roundingData roundData; - SetRoundingMode(ROUND_TO_NEAREST); + roundData.mode = SetRoundingMode(opcode); + roundData.precision = SetRoundingPrecision(opcode); + roundData.exception = 0; pBase = (unsigned int __user *) readRegister(getRn(opcode)); if (REG_PC == getRn(opcode)) { @@ -281,10 +284,10 @@ unsigned int PerformSTF(const unsigned int opcode) switch (opcode & MASK_TRANSFER_LENGTH) { case TRANSFER_SINGLE: - storeSingle(getFd(opcode), pAddress); + storeSingle(&roundData, getFd(opcode), pAddress); break; case TRANSFER_DOUBLE: - storeDouble(getFd(opcode), pAddress); + storeDouble(&roundData, getFd(opcode), pAddress); break; #ifdef CONFIG_FPE_NWFPE_XP case TRANSFER_EXTENDED: @@ -295,6 +298,9 @@ unsigned int PerformSTF(const unsigned int opcode) nRc = 0; } + if (roundData.exception) + float_raise(roundData.exception); + if (write_back) writeRegister(getRn(opcode), (unsigned long) pFinal); return nRc; diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c index db01fbc97216..adf8d3000540 100644 --- a/arch/arm/nwfpe/fpa11_cprt.c +++ b/arch/arm/nwfpe/fpa11_cprt.c @@ -33,8 +33,6 @@ extern flag floatx80_is_nan(floatx80); extern flag float64_is_nan(float64); extern flag float32_is_nan(float32); -void SetRoundingMode(const unsigned int opcode); - unsigned int PerformFLT(const unsigned int opcode); unsigned int PerformFIX(const unsigned int opcode); @@ -77,14 +75,17 @@ unsigned int EmulateCPRT(const unsigned int opcode) unsigned int PerformFLT(const unsigned int opcode) { FPA11 *fpa11 = GET_FPA11(); - SetRoundingMode(opcode); - SetRoundingPrecision(opcode); + struct roundingData roundData; + + roundData.mode = SetRoundingMode(opcode); + roundData.precision = SetRoundingPrecision(opcode); + roundData.exception = 0; switch (opcode & MASK_ROUNDING_PRECISION) { case ROUND_SINGLE: { fpa11->fType[getFn(opcode)] = typeSingle; - fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(readRegister(getRd(opcode))); + fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(&roundData, readRegister(getRd(opcode))); } break; @@ -108,6 +109,9 @@ unsigned int PerformFLT(const unsigned int opcode) return 0; } + if (roundData.exception) + float_raise(roundData.exception); + return 1; } @@ -115,26 +119,29 @@ unsigned int PerformFIX(const unsigned int opcode) { FPA11 *fpa11 = GET_FPA11(); unsigned int Fn = getFm(opcode); + struct roundingData roundData; - SetRoundingMode(opcode); + roundData.mode = SetRoundingMode(opcode); + roundData.precision = SetRoundingPrecision(opcode); + roundData.exception = 0; switch (fpa11->fType[Fn]) { case typeSingle: { - writeRegister(getRd(opcode), float32_to_int32(fpa11->fpreg[Fn].fSingle)); + writeRegister(getRd(opcode), float32_to_int32(&roundData, fpa11->fpreg[Fn].fSingle)); } break; case typeDouble: { - writeRegister(getRd(opcode), float64_to_int32(fpa11->fpreg[Fn].fDouble)); + writeRegister(getRd(opcode), float64_to_int32(&roundData, fpa11->fpreg[Fn].fDouble)); } break; #ifdef CONFIG_FPE_NWFPE_XP case typeExtended: { - writeRegister(getRd(opcode), floatx80_to_int32(fpa11->fpreg[Fn].fExtended)); + writeRegister(getRd(opcode), floatx80_to_int32(&roundData, fpa11->fpreg[Fn].fExtended)); } break; #endif @@ -143,6 +150,9 @@ unsigned int PerformFIX(const unsigned int opcode) return 0; } + if (roundData.exception) + float_raise(roundData.exception); + return 1; } diff --git a/arch/arm/nwfpe/fpmodule.c b/arch/arm/nwfpe/fpmodule.c index a806fea5c3ed..2dfe1ac42ee8 100644 --- a/arch/arm/nwfpe/fpmodule.c +++ b/arch/arm/nwfpe/fpmodule.c @@ -24,7 +24,6 @@ #include "fpa11.h" #include <linux/module.h> -#include <linux/version.h> #include <linux/config.h> /* XXX */ @@ -117,8 +116,6 @@ fpmodule.c to integrate with the NetBSD kernel (I hope!). code to access data in user space in some other source files at the moment (grep for get_user / put_user calls). --philb] -float_exception_flags is a global variable in SoftFloat. - This function is called by the SoftFloat routines to raise a floating point exception. We check the trap enable byte in the FPSR, and raise a SIGFPE exception if necessary. If not the relevant bits in the @@ -130,15 +127,14 @@ void float_raise(signed char flags) register unsigned int fpsr, cumulativeTraps; #ifdef CONFIG_DEBUG_USER - printk(KERN_DEBUG - "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n", - current->comm, current->pid, flags, - __builtin_return_address(0), GET_USERREG()[15]); + /* Ignore inexact errors as there are far too many of them to log */ + if (flags & ~BIT_IXC) + printk(KERN_DEBUG + "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n", + current->comm, current->pid, flags, + __builtin_return_address(0), GET_USERREG()->ARM_pc); #endif - /* Keep SoftFloat exception flags up to date. */ - float_exception_flags |= flags; - /* Read fpsr and initialize the cumulativeTraps. */ fpsr = readFPSR(); cumulativeTraps = 0; diff --git a/arch/arm/nwfpe/fpmodule.inl b/arch/arm/nwfpe/fpmodule.inl index e5f59e9a3022..2c39ad408f22 100644 --- a/arch/arm/nwfpe/fpmodule.inl +++ b/arch/arm/nwfpe/fpmodule.inl @@ -28,8 +28,8 @@ static inline unsigned long readRegister(const unsigned int nReg) for this in this routine. LDF/STF instructions with Rn = PC depend on the PC being correct, as they use PC+8 in their address calculations. */ - unsigned long *userRegisters = GET_USERREG(); - unsigned int val = userRegisters[nReg]; + struct pt_regs *regs = GET_USERREG(); + unsigned int val = regs->uregs[nReg]; if (REG_PC == nReg) val -= 4; return val; @@ -38,8 +38,8 @@ static inline unsigned long readRegister(const unsigned int nReg) static inline void writeRegister(const unsigned int nReg, const unsigned long val) { - unsigned long *userRegisters = GET_USERREG(); - userRegisters[nReg] = val; + struct pt_regs *regs = GET_USERREG(); + regs->uregs[nReg] = val; } static inline unsigned long readCPSR(void) @@ -63,12 +63,12 @@ static inline unsigned long readConditionCodes(void) static inline void writeConditionCodes(const unsigned long val) { - unsigned long *userRegisters = GET_USERREG(); + struct pt_regs *regs = GET_USERREG(); unsigned long rval; /* * Operate directly on userRegisters since * the CPSR may be the PC register itself. */ - rval = userRegisters[REG_CPSR] & ~CC_MASK; - userRegisters[REG_CPSR] = rval | (val & CC_MASK); + rval = regs->ARM_cpsr & ~CC_MASK; + regs->ARM_cpsr = rval | (val & CC_MASK); } diff --git a/arch/arm/nwfpe/single_cpdo.c b/arch/arm/nwfpe/single_cpdo.c index 705808e88d9d..c66981d682cf 100644 --- a/arch/arm/nwfpe/single_cpdo.c +++ b/arch/arm/nwfpe/single_cpdo.c @@ -36,17 +36,17 @@ float32 float32_arccos(float32 rFm); float32 float32_pow(float32 rFn, float32 rFm); float32 float32_pol(float32 rFn, float32 rFm); -static float32 float32_rsf(float32 rFn, float32 rFm) +static float32 float32_rsf(struct roundingData *roundData, float32 rFn, float32 rFm) { - return float32_sub(rFm, rFn); + return float32_sub(roundData, rFm, rFn); } -static float32 float32_rdv(float32 rFn, float32 rFm) +static float32 float32_rdv(struct roundingData *roundData, float32 rFn, float32 rFm) { - return float32_div(rFm, rFn); + return float32_div(roundData, rFm, rFn); } -static float32 (*const dyadic_single[16])(float32 rFn, float32 rFm) = { +static float32 (*const dyadic_single[16])(struct roundingData *, float32 rFn, float32 rFm) = { [ADF_CODE >> 20] = float32_add, [MUF_CODE >> 20] = float32_mul, [SUF_CODE >> 20] = float32_sub, @@ -60,22 +60,22 @@ static float32 (*const dyadic_single[16])(float32 rFn, float32 rFm) = { [FRD_CODE >> 20] = float32_rdv, }; -static float32 float32_mvf(float32 rFm) +static float32 float32_mvf(struct roundingData *roundData, float32 rFm) { return rFm; } -static float32 float32_mnf(float32 rFm) +static float32 float32_mnf(struct roundingData *roundData, float32 rFm) { return rFm ^ 0x80000000; } -static float32 float32_abs(float32 rFm) +static float32 float32_abs(struct roundingData *roundData, float32 rFm) { return rFm & 0x7fffffff; } -static float32 (*const monadic_single[16])(float32 rFm) = { +static float32 (*const monadic_single[16])(struct roundingData*, float32 rFm) = { [MVF_CODE >> 20] = float32_mvf, [MNF_CODE >> 20] = float32_mnf, [ABS_CODE >> 20] = float32_abs, @@ -85,7 +85,7 @@ static float32 (*const monadic_single[16])(float32 rFm) = { [NRM_CODE >> 20] = float32_mvf, }; -unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd) +unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd) { FPA11 *fpa11 = GET_FPA11(); float32 rFm; @@ -108,13 +108,13 @@ unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd) if (fpa11->fType[Fn] == typeSingle && dyadic_single[opc_mask_shift]) { rFn = fpa11->fpreg[Fn].fSingle; - rFd->fSingle = dyadic_single[opc_mask_shift](rFn, rFm); + rFd->fSingle = dyadic_single[opc_mask_shift](roundData, rFn, rFm); } else { return 0; } } else { if (monadic_single[opc_mask_shift]) { - rFd->fSingle = monadic_single[opc_mask_shift](rFm); + rFd->fSingle = monadic_single[opc_mask_shift](roundData, rFm); } else { return 0; } diff --git a/arch/arm/nwfpe/softfloat-macros b/arch/arm/nwfpe/softfloat-macros index 5469989f2c5e..5a060f95a58f 100644 --- a/arch/arm/nwfpe/softfloat-macros +++ b/arch/arm/nwfpe/softfloat-macros @@ -563,8 +563,14 @@ static bits64 estimateDiv128To64( bits64 a0, bits64 a1, bits64 b ) bits64 rem0, rem1, term0, term1; bits64 z; if ( b <= a0 ) return LIT64( 0xFFFFFFFFFFFFFFFF ); - b0 = b>>32; - z = ( b0<<32 <= a0 ) ? LIT64( 0xFFFFFFFF00000000 ) : ( a0 / b0 )<<32; + b0 = b>>32; /* hence b0 is 32 bits wide now */ + if ( b0<<32 <= a0 ) { + z = LIT64( 0xFFFFFFFF00000000 ); + } else { + z = a0; + do_div( z, b0 ); + z <<= 32; + } mul64To128( b, z, &term0, &term1 ); sub128( a0, a1, term0, term1, &rem0, &rem1 ); while ( ( (sbits64) rem0 ) < 0 ) { @@ -573,7 +579,12 @@ static bits64 estimateDiv128To64( bits64 a0, bits64 a1, bits64 b ) add128( rem0, rem1, b0, b1, &rem0, &rem1 ); } rem0 = ( rem0<<32 ) | ( rem1>>32 ); - z |= ( b0<<32 <= rem0 ) ? 0xFFFFFFFF : rem0 / b0; + if ( b0<<32 <= rem0 ) { + z |= 0xFFFFFFFF; + } else { + do_div( rem0, b0 ); + z |= rem0; + } return z; } @@ -601,6 +612,7 @@ static bits32 estimateSqrt32( int16 aExp, bits32 a ) }; int8 index; bits32 z; + bits64 A; index = ( a>>27 ) & 15; if ( aExp & 1 ) { @@ -614,7 +626,9 @@ static bits32 estimateSqrt32( int16 aExp, bits32 a ) z = ( 0x20000 <= z ) ? 0xFFFF8000 : ( z<<15 ); if ( z <= a ) return (bits32) ( ( (sbits32) a )>>1 ); } - return ( (bits32) ( ( ( (bits64) a )<<31 ) / z ) ) + ( z>>1 ); + A = ( (bits64) a )<<31; + do_div( A, z ); + return ( (bits32) A ) + ( z>>1 ); } diff --git a/arch/arm/nwfpe/softfloat.c b/arch/arm/nwfpe/softfloat.c index 9d743ae29062..8b75a6e7cb3a 100644 --- a/arch/arm/nwfpe/softfloat.c +++ b/arch/arm/nwfpe/softfloat.c @@ -28,22 +28,14 @@ this code that are retained. =============================================================================== */ +#include <asm/div64.h> + #include "fpa11.h" //#include "milieu.h" //#include "softfloat.h" /* ------------------------------------------------------------------------------- -Floating-point rounding mode, extended double-precision rounding precision, -and exception flags. -------------------------------------------------------------------------------- -*/ -int8 float_rounding_mode = float_round_nearest_even; -int8 floatx80_rounding_precision = 80; -int8 float_exception_flags; - -/* -------------------------------------------------------------------------------- Primitive arithmetic functions, including multi-word arithmetic, and division and square root approximations. (Can be specialized to target if desired.) @@ -75,14 +67,14 @@ input is too large, however, the invalid exception is raised and the largest positive or negative integer is returned. ------------------------------------------------------------------------------- */ -static int32 roundAndPackInt32( flag zSign, bits64 absZ ) +static int32 roundAndPackInt32( struct roundingData *roundData, flag zSign, bits64 absZ ) { int8 roundingMode; flag roundNearestEven; int8 roundIncrement, roundBits; int32 z; - roundingMode = float_rounding_mode; + roundingMode = roundData->mode; roundNearestEven = ( roundingMode == float_round_nearest_even ); roundIncrement = 0x40; if ( ! roundNearestEven ) { @@ -105,10 +97,10 @@ static int32 roundAndPackInt32( flag zSign, bits64 absZ ) z = absZ; if ( zSign ) z = - z; if ( ( absZ>>32 ) || ( z && ( ( z < 0 ) ^ zSign ) ) ) { - float_exception_flags |= float_flag_invalid; + roundData->exception |= float_flag_invalid; return zSign ? 0x80000000 : 0x7FFFFFFF; } - if ( roundBits ) float_exception_flags |= float_flag_inexact; + if ( roundBits ) roundData->exception |= float_flag_inexact; return z; } @@ -222,14 +214,14 @@ The handling of underflow and overflow follows the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -static float32 roundAndPackFloat32( flag zSign, int16 zExp, bits32 zSig ) +static float32 roundAndPackFloat32( struct roundingData *roundData, flag zSign, int16 zExp, bits32 zSig ) { int8 roundingMode; flag roundNearestEven; int8 roundIncrement, roundBits; flag isTiny; - roundingMode = float_rounding_mode; + roundingMode = roundData->mode; roundNearestEven = ( roundingMode == float_round_nearest_even ); roundIncrement = 0x40; if ( ! roundNearestEven ) { @@ -252,7 +244,7 @@ static float32 roundAndPackFloat32( flag zSign, int16 zExp, bits32 zSig ) || ( ( zExp == 0xFD ) && ( (sbits32) ( zSig + roundIncrement ) < 0 ) ) ) { - float_raise( float_flag_overflow | float_flag_inexact ); + roundData->exception |= float_flag_overflow | float_flag_inexact; return packFloat32( zSign, 0xFF, 0 ) - ( roundIncrement == 0 ); } if ( zExp < 0 ) { @@ -263,10 +255,10 @@ static float32 roundAndPackFloat32( flag zSign, int16 zExp, bits32 zSig ) shift32RightJamming( zSig, - zExp, &zSig ); zExp = 0; roundBits = zSig & 0x7F; - if ( isTiny && roundBits ) float_raise( float_flag_underflow ); + if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow; } } - if ( roundBits ) float_exception_flags |= float_flag_inexact; + if ( roundBits ) roundData->exception |= float_flag_inexact; zSig = ( zSig + roundIncrement )>>7; zSig &= ~ ( ( ( roundBits ^ 0x40 ) == 0 ) & roundNearestEven ); if ( zSig == 0 ) zExp = 0; @@ -285,12 +277,12 @@ point exponent. ------------------------------------------------------------------------------- */ static float32 - normalizeRoundAndPackFloat32( flag zSign, int16 zExp, bits32 zSig ) + normalizeRoundAndPackFloat32( struct roundingData *roundData, flag zSign, int16 zExp, bits32 zSig ) { int8 shiftCount; shiftCount = countLeadingZeros32( zSig ) - 1; - return roundAndPackFloat32( zSign, zExp - shiftCount, zSig<<shiftCount ); + return roundAndPackFloat32( roundData, zSign, zExp - shiftCount, zSig<<shiftCount ); } @@ -393,14 +385,14 @@ The handling of underflow and overflow follows the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -static float64 roundAndPackFloat64( flag zSign, int16 zExp, bits64 zSig ) +static float64 roundAndPackFloat64( struct roundingData *roundData, flag zSign, int16 zExp, bits64 zSig ) { int8 roundingMode; flag roundNearestEven; int16 roundIncrement, roundBits; flag isTiny; - roundingMode = float_rounding_mode; + roundingMode = roundData->mode; roundNearestEven = ( roundingMode == float_round_nearest_even ); roundIncrement = 0x200; if ( ! roundNearestEven ) { @@ -425,7 +417,7 @@ static float64 roundAndPackFloat64( flag zSign, int16 zExp, bits64 zSig ) ) { //register int lr = __builtin_return_address(0); //printk("roundAndPackFloat64 called from 0x%08x\n",lr); - float_raise( float_flag_overflow | float_flag_inexact ); + roundData->exception |= float_flag_overflow | float_flag_inexact; return packFloat64( zSign, 0x7FF, 0 ) - ( roundIncrement == 0 ); } if ( zExp < 0 ) { @@ -436,10 +428,10 @@ static float64 roundAndPackFloat64( flag zSign, int16 zExp, bits64 zSig ) shift64RightJamming( zSig, - zExp, &zSig ); zExp = 0; roundBits = zSig & 0x3FF; - if ( isTiny && roundBits ) float_raise( float_flag_underflow ); + if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow; } } - if ( roundBits ) float_exception_flags |= float_flag_inexact; + if ( roundBits ) roundData->exception |= float_flag_inexact; zSig = ( zSig + roundIncrement )>>10; zSig &= ~ ( ( ( roundBits ^ 0x200 ) == 0 ) & roundNearestEven ); if ( zSig == 0 ) zExp = 0; @@ -458,12 +450,12 @@ point exponent. ------------------------------------------------------------------------------- */ static float64 - normalizeRoundAndPackFloat64( flag zSign, int16 zExp, bits64 zSig ) + normalizeRoundAndPackFloat64( struct roundingData *roundData, flag zSign, int16 zExp, bits64 zSig ) { int8 shiftCount; shiftCount = countLeadingZeros64( zSig ) - 1; - return roundAndPackFloat64( zSign, zExp - shiftCount, zSig<<shiftCount ); + return roundAndPackFloat64( roundData, zSign, zExp - shiftCount, zSig<<shiftCount ); } @@ -570,14 +562,15 @@ Floating-point Arithmetic. */ static floatx80 roundAndPackFloatx80( - int8 roundingPrecision, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1 + struct roundingData *roundData, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1 ) { - int8 roundingMode; + int8 roundingMode, roundingPrecision; flag roundNearestEven, increment, isTiny; int64 roundIncrement, roundMask, roundBits; - roundingMode = float_rounding_mode; + roundingMode = roundData->mode; + roundingPrecision = roundData->precision; roundNearestEven = ( roundingMode == float_round_nearest_even ); if ( roundingPrecision == 80 ) goto precision80; if ( roundingPrecision == 64 ) { @@ -621,8 +614,8 @@ static floatx80 shift64RightJamming( zSig0, 1 - zExp, &zSig0 ); zExp = 0; roundBits = zSig0 & roundMask; - if ( isTiny && roundBits ) float_raise( float_flag_underflow ); - if ( roundBits ) float_exception_flags |= float_flag_inexact; + if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow; + if ( roundBits ) roundData->exception |= float_flag_inexact; zSig0 += roundIncrement; if ( (sbits64) zSig0 < 0 ) zExp = 1; roundIncrement = roundMask + 1; @@ -633,7 +626,7 @@ static floatx80 return packFloatx80( zSign, zExp, zSig0 ); } } - if ( roundBits ) float_exception_flags |= float_flag_inexact; + if ( roundBits ) roundData->exception |= float_flag_inexact; zSig0 += roundIncrement; if ( zSig0 < roundIncrement ) { ++zExp; @@ -670,7 +663,7 @@ static floatx80 ) { roundMask = 0; overflow: - float_raise( float_flag_overflow | float_flag_inexact ); + roundData->exception |= float_flag_overflow | float_flag_inexact; if ( ( roundingMode == float_round_to_zero ) || ( zSign && ( roundingMode == float_round_up ) ) || ( ! zSign && ( roundingMode == float_round_down ) ) @@ -687,8 +680,8 @@ static floatx80 || ( zSig0 < LIT64( 0xFFFFFFFFFFFFFFFF ) ); shift64ExtraRightJamming( zSig0, zSig1, 1 - zExp, &zSig0, &zSig1 ); zExp = 0; - if ( isTiny && zSig1 ) float_raise( float_flag_underflow ); - if ( zSig1 ) float_exception_flags |= float_flag_inexact; + if ( isTiny && zSig1 ) roundData->exception |= float_flag_underflow; + if ( zSig1 ) roundData->exception |= float_flag_inexact; if ( roundNearestEven ) { increment = ( (sbits64) zSig1 < 0 ); } @@ -708,7 +701,7 @@ static floatx80 return packFloatx80( zSign, zExp, zSig0 ); } } - if ( zSig1 ) float_exception_flags |= float_flag_inexact; + if ( zSig1 ) roundData->exception |= float_flag_inexact; if ( increment ) { ++zSig0; if ( zSig0 == 0 ) { @@ -738,7 +731,7 @@ normalized. */ static floatx80 normalizeRoundAndPackFloatx80( - int8 roundingPrecision, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1 + struct roundingData *roundData, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1 ) { int8 shiftCount; @@ -752,7 +745,7 @@ static floatx80 shortShift128Left( zSig0, zSig1, shiftCount, &zSig0, &zSig1 ); zExp -= shiftCount; return - roundAndPackFloatx80( roundingPrecision, zSign, zExp, zSig0, zSig1 ); + roundAndPackFloatx80( roundData, zSign, zExp, zSig0, zSig1 ); } @@ -765,14 +758,14 @@ the single-precision floating-point format. The conversion is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 int32_to_float32( int32 a ) +float32 int32_to_float32(struct roundingData *roundData, int32 a) { flag zSign; if ( a == 0 ) return 0; if ( a == 0x80000000 ) return packFloat32( 1, 0x9E, 0 ); zSign = ( a < 0 ); - return normalizeRoundAndPackFloat32( zSign, 0x9C, zSign ? - a : a ); + return normalizeRoundAndPackFloat32( roundData, zSign, 0x9C, zSign ? - a : a ); } @@ -838,7 +831,7 @@ positive integer is returned. Otherwise, if the conversion overflows, the largest integer with the same sign as `a' is returned. ------------------------------------------------------------------------------- */ -int32 float32_to_int32( float32 a ) +int32 float32_to_int32( struct roundingData *roundData, float32 a ) { flag aSign; int16 aExp, shiftCount; @@ -854,7 +847,7 @@ int32 float32_to_int32( float32 a ) zSig = aSig; zSig <<= 32; if ( 0 < shiftCount ) shift64RightJamming( zSig, shiftCount, &zSig ); - return roundAndPackInt32( aSign, zSig ); + return roundAndPackInt32( roundData, aSign, zSig ); } @@ -887,13 +880,13 @@ int32 float32_to_int32_round_to_zero( float32 a ) return 0x80000000; } else if ( aExp <= 0x7E ) { - if ( aExp | aSig ) float_exception_flags |= float_flag_inexact; + if ( aExp | aSig ) float_raise( float_flag_inexact ); return 0; } aSig = ( aSig | 0x00800000 )<<8; z = aSig>>( - shiftCount ); if ( (bits32) ( aSig<<( shiftCount & 31 ) ) ) { - float_exception_flags |= float_flag_inexact; + float_raise( float_flag_inexact ); } return aSign ? - z : z; @@ -971,7 +964,7 @@ operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 float32_round_to_int( float32 a ) +float32 float32_round_to_int( struct roundingData *roundData, float32 a ) { flag aSign; int16 aExp; @@ -986,11 +979,12 @@ float32 float32_round_to_int( float32 a ) } return a; } + roundingMode = roundData->mode; if ( aExp <= 0x7E ) { if ( (bits32) ( a<<1 ) == 0 ) return a; - float_exception_flags |= float_flag_inexact; + roundData->exception |= float_flag_inexact; aSign = extractFloat32Sign( a ); - switch ( float_rounding_mode ) { + switch ( roundingMode ) { case float_round_nearest_even: if ( ( aExp == 0x7E ) && extractFloat32Frac( a ) ) { return packFloat32( aSign, 0x7F, 0 ); @@ -1007,7 +1001,6 @@ float32 float32_round_to_int( float32 a ) lastBitMask <<= 0x96 - aExp; roundBitsMask = lastBitMask - 1; z = a; - roundingMode = float_rounding_mode; if ( roundingMode == float_round_nearest_even ) { z += lastBitMask>>1; if ( ( z & roundBitsMask ) == 0 ) z &= ~ lastBitMask; @@ -1018,7 +1011,7 @@ float32 float32_round_to_int( float32 a ) } } z &= ~ roundBitsMask; - if ( z != a ) float_exception_flags |= float_flag_inexact; + if ( z != a ) roundData->exception |= float_flag_inexact; return z; } @@ -1032,7 +1025,7 @@ addition is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -static float32 addFloat32Sigs( float32 a, float32 b, flag zSign ) +static float32 addFloat32Sigs( struct roundingData *roundData, float32 a, float32 b, flag zSign ) { int16 aExp, bExp, zExp; bits32 aSig, bSig, zSig; @@ -1091,7 +1084,7 @@ static float32 addFloat32Sigs( float32 a, float32 b, flag zSign ) ++zExp; } roundAndPack: - return roundAndPackFloat32( zSign, zExp, zSig ); + return roundAndPackFloat32( roundData, zSign, zExp, zSig ); } @@ -1104,7 +1097,7 @@ result is a NaN. The subtraction is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -static float32 subFloat32Sigs( float32 a, float32 b, flag zSign ) +static float32 subFloat32Sigs( struct roundingData *roundData, float32 a, float32 b, flag zSign ) { int16 aExp, bExp, zExp; bits32 aSig, bSig, zSig; @@ -1121,7 +1114,7 @@ static float32 subFloat32Sigs( float32 a, float32 b, flag zSign ) if ( expDiff < 0 ) goto bExpBigger; if ( aExp == 0xFF ) { if ( aSig | bSig ) return propagateFloat32NaN( a, b ); - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } if ( aExp == 0 ) { @@ -1130,7 +1123,7 @@ static float32 subFloat32Sigs( float32 a, float32 b, flag zSign ) } if ( bSig < aSig ) goto aBigger; if ( aSig < bSig ) goto bBigger; - return packFloat32( float_rounding_mode == float_round_down, 0, 0 ); + return packFloat32( roundData->mode == float_round_down, 0, 0 ); bExpBigger: if ( bExp == 0xFF ) { if ( bSig ) return propagateFloat32NaN( a, b ); @@ -1167,7 +1160,7 @@ static float32 subFloat32Sigs( float32 a, float32 b, flag zSign ) zExp = aExp; normalizeRoundAndPack: --zExp; - return normalizeRoundAndPackFloat32( zSign, zExp, zSig ); + return normalizeRoundAndPackFloat32( roundData, zSign, zExp, zSig ); } @@ -1178,17 +1171,17 @@ and `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 float32_add( float32 a, float32 b ) +float32 float32_add( struct roundingData *roundData, float32 a, float32 b ) { flag aSign, bSign; aSign = extractFloat32Sign( a ); bSign = extractFloat32Sign( b ); if ( aSign == bSign ) { - return addFloat32Sigs( a, b, aSign ); + return addFloat32Sigs( roundData, a, b, aSign ); } else { - return subFloat32Sigs( a, b, aSign ); + return subFloat32Sigs( roundData, a, b, aSign ); } } @@ -1200,17 +1193,17 @@ Returns the result of subtracting the single-precision floating-point values for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 float32_sub( float32 a, float32 b ) +float32 float32_sub( struct roundingData *roundData, float32 a, float32 b ) { flag aSign, bSign; aSign = extractFloat32Sign( a ); bSign = extractFloat32Sign( b ); if ( aSign == bSign ) { - return subFloat32Sigs( a, b, aSign ); + return subFloat32Sigs( roundData, a, b, aSign ); } else { - return addFloat32Sigs( a, b, aSign ); + return addFloat32Sigs( roundData, a, b, aSign ); } } @@ -1222,7 +1215,7 @@ Returns the result of multiplying the single-precision floating-point values for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 float32_mul( float32 a, float32 b ) +float32 float32_mul( struct roundingData *roundData, float32 a, float32 b ) { flag aSign, bSign, zSign; int16 aExp, bExp, zExp; @@ -1242,7 +1235,7 @@ float32 float32_mul( float32 a, float32 b ) return propagateFloat32NaN( a, b ); } if ( ( bExp | bSig ) == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } return packFloat32( zSign, 0xFF, 0 ); @@ -1250,7 +1243,7 @@ float32 float32_mul( float32 a, float32 b ) if ( bExp == 0xFF ) { if ( bSig ) return propagateFloat32NaN( a, b ); if ( ( aExp | aSig ) == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } return packFloat32( zSign, 0xFF, 0 ); @@ -1272,7 +1265,7 @@ float32 float32_mul( float32 a, float32 b ) zSig <<= 1; --zExp; } - return roundAndPackFloat32( zSign, zExp, zSig ); + return roundAndPackFloat32( roundData, zSign, zExp, zSig ); } @@ -1283,7 +1276,7 @@ by the corresponding value `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 float32_div( float32 a, float32 b ) +float32 float32_div( struct roundingData *roundData, float32 a, float32 b ) { flag aSign, bSign, zSign; int16 aExp, bExp, zExp; @@ -1300,7 +1293,7 @@ float32 float32_div( float32 a, float32 b ) if ( aSig ) return propagateFloat32NaN( a, b ); if ( bExp == 0xFF ) { if ( bSig ) return propagateFloat32NaN( a, b ); - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } return packFloat32( zSign, 0xFF, 0 ); @@ -1312,10 +1305,10 @@ float32 float32_div( float32 a, float32 b ) if ( bExp == 0 ) { if ( bSig == 0 ) { if ( ( aExp | aSig ) == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } - float_raise( float_flag_divbyzero ); + roundData->exception |= float_flag_divbyzero; return packFloat32( zSign, 0xFF, 0 ); } normalizeFloat32Subnormal( bSig, &bExp, &bSig ); @@ -1331,11 +1324,15 @@ float32 float32_div( float32 a, float32 b ) aSig >>= 1; ++zExp; } - zSig = ( ( (bits64) aSig )<<32 ) / bSig; + { + bits64 tmp = ( (bits64) aSig )<<32; + do_div( tmp, bSig ); + zSig = tmp; + } if ( ( zSig & 0x3F ) == 0 ) { zSig |= ( ( (bits64) bSig ) * zSig != ( (bits64) aSig )<<32 ); } - return roundAndPackFloat32( zSign, zExp, zSig ); + return roundAndPackFloat32( roundData, zSign, zExp, zSig ); } @@ -1346,7 +1343,7 @@ with respect to the corresponding value `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 float32_rem( float32 a, float32 b ) +float32 float32_rem( struct roundingData *roundData, float32 a, float32 b ) { flag aSign, bSign, zSign; int16 aExp, bExp, expDiff; @@ -1366,7 +1363,7 @@ float32 float32_rem( float32 a, float32 b ) if ( aSig || ( ( bExp == 0xFF ) && bSig ) ) { return propagateFloat32NaN( a, b ); } - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } if ( bExp == 0xFF ) { @@ -1375,7 +1372,7 @@ float32 float32_rem( float32 a, float32 b ) } if ( bExp == 0 ) { if ( bSig == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } normalizeFloat32Subnormal( bSig, &bExp, &bSig ); @@ -1397,7 +1394,9 @@ float32 float32_rem( float32 a, float32 b ) q = ( bSig <= aSig ); if ( q ) aSig -= bSig; if ( 0 < expDiff ) { - q = ( ( (bits64) aSig )<<32 ) / bSig; + bits64 tmp = ( (bits64) aSig )<<32; + do_div( tmp, bSig ); + q = tmp; q >>= 32 - expDiff; bSig >>= 2; aSig = ( ( aSig>>1 )<<( expDiff - 1 ) ) - bSig * q; @@ -1436,7 +1435,7 @@ float32 float32_rem( float32 a, float32 b ) } zSign = ( (sbits32) aSig < 0 ); if ( zSign ) aSig = - aSig; - return normalizeRoundAndPackFloat32( aSign ^ zSign, bExp, aSig ); + return normalizeRoundAndPackFloat32( roundData, aSign ^ zSign, bExp, aSig ); } @@ -1447,7 +1446,7 @@ The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 float32_sqrt( float32 a ) +float32 float32_sqrt( struct roundingData *roundData, float32 a ) { flag aSign; int16 aExp, zExp; @@ -1460,12 +1459,12 @@ float32 float32_sqrt( float32 a ) if ( aExp == 0xFF ) { if ( aSig ) return propagateFloat32NaN( a, 0 ); if ( ! aSign ) return a; - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } if ( aSign ) { if ( ( aExp | aSig ) == 0 ) return a; - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } if ( aExp == 0 ) { @@ -1491,7 +1490,7 @@ float32 float32_sqrt( float32 a ) } } shift32RightJamming( zSig, 1, &zSig ); - return roundAndPackFloat32( 0, zExp, zSig ); + return roundAndPackFloat32( roundData, 0, zExp, zSig ); } @@ -1653,7 +1652,7 @@ positive integer is returned. Otherwise, if the conversion overflows, the largest integer with the same sign as `a' is returned. ------------------------------------------------------------------------------- */ -int32 float64_to_int32( float64 a ) +int32 float64_to_int32( struct roundingData *roundData, float64 a ) { flag aSign; int16 aExp, shiftCount; @@ -1666,7 +1665,7 @@ int32 float64_to_int32( float64 a ) if ( aExp ) aSig |= LIT64( 0x0010000000000000 ); shiftCount = 0x42C - aExp; if ( 0 < shiftCount ) shift64RightJamming( aSig, shiftCount, &aSig ); - return roundAndPackInt32( aSign, aSig ); + return roundAndPackInt32( roundData, aSign, aSig ); } @@ -1697,7 +1696,7 @@ int32 float64_to_int32_round_to_zero( float64 a ) goto invalid; } else if ( 52 < shiftCount ) { - if ( aExp || aSig ) float_exception_flags |= float_flag_inexact; + if ( aExp || aSig ) float_raise( float_flag_inexact ); return 0; } aSig |= LIT64( 0x0010000000000000 ); @@ -1707,11 +1706,11 @@ int32 float64_to_int32_round_to_zero( float64 a ) if ( aSign ) z = - z; if ( ( z < 0 ) ^ aSign ) { invalid: - float_exception_flags |= float_flag_invalid; + float_raise( float_flag_invalid ); return aSign ? 0x80000000 : 0x7FFFFFFF; } if ( ( aSig<<shiftCount ) != savedASig ) { - float_exception_flags |= float_flag_inexact; + float_raise( float_flag_inexact ); } return z; @@ -1728,7 +1727,7 @@ positive integer is returned. Otherwise, if the conversion overflows, the largest positive integer is returned. ------------------------------------------------------------------------------- */ -int32 float64_to_uint32( float64 a ) +int32 float64_to_uint32( struct roundingData *roundData, float64 a ) { flag aSign; int16 aExp, shiftCount; @@ -1741,7 +1740,7 @@ int32 float64_to_uint32( float64 a ) if ( aExp ) aSig |= LIT64( 0x0010000000000000 ); shiftCount = 0x42C - aExp; if ( 0 < shiftCount ) shift64RightJamming( aSig, shiftCount, &aSig ); - return roundAndPackInt32( aSign, aSig ); + return roundAndPackInt32( roundData, aSign, aSig ); } /* @@ -1770,7 +1769,7 @@ int32 float64_to_uint32_round_to_zero( float64 a ) goto invalid; } else if ( 52 < shiftCount ) { - if ( aExp || aSig ) float_exception_flags |= float_flag_inexact; + if ( aExp || aSig ) float_raise( float_flag_inexact ); return 0; } aSig |= LIT64( 0x0010000000000000 ); @@ -1780,11 +1779,11 @@ int32 float64_to_uint32_round_to_zero( float64 a ) if ( aSign ) z = - z; if ( ( z < 0 ) ^ aSign ) { invalid: - float_exception_flags |= float_flag_invalid; + float_raise( float_flag_invalid ); return aSign ? 0x80000000 : 0x7FFFFFFF; } if ( ( aSig<<shiftCount ) != savedASig ) { - float_exception_flags |= float_flag_inexact; + float_raise( float_flag_inexact ); } return z; } @@ -1797,7 +1796,7 @@ performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 float64_to_float32( float64 a ) +float32 float64_to_float32( struct roundingData *roundData, float64 a ) { flag aSign; int16 aExp; @@ -1817,7 +1816,7 @@ float32 float64_to_float32( float64 a ) zSig |= 0x40000000; aExp -= 0x381; } - return roundAndPackFloat32( aSign, aExp, zSig ); + return roundAndPackFloat32( roundData, aSign, aExp, zSig ); } @@ -1864,7 +1863,7 @@ operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float64 float64_round_to_int( float64 a ) +float64 float64_round_to_int( struct roundingData *roundData, float64 a ) { flag aSign; int16 aExp; @@ -1881,9 +1880,9 @@ float64 float64_round_to_int( float64 a ) } if ( aExp <= 0x3FE ) { if ( (bits64) ( a<<1 ) == 0 ) return a; - float_exception_flags |= float_flag_inexact; + roundData->exception |= float_flag_inexact; aSign = extractFloat64Sign( a ); - switch ( float_rounding_mode ) { + switch ( roundData->mode ) { case float_round_nearest_even: if ( ( aExp == 0x3FE ) && extractFloat64Frac( a ) ) { return packFloat64( aSign, 0x3FF, 0 ); @@ -1901,7 +1900,7 @@ float64 float64_round_to_int( float64 a ) lastBitMask <<= 0x433 - aExp; roundBitsMask = lastBitMask - 1; z = a; - roundingMode = float_rounding_mode; + roundingMode = roundData->mode; if ( roundingMode == float_round_nearest_even ) { z += lastBitMask>>1; if ( ( z & roundBitsMask ) == 0 ) z &= ~ lastBitMask; @@ -1912,7 +1911,7 @@ float64 float64_round_to_int( float64 a ) } } z &= ~ roundBitsMask; - if ( z != a ) float_exception_flags |= float_flag_inexact; + if ( z != a ) roundData->exception |= float_flag_inexact; return z; } @@ -1926,7 +1925,7 @@ addition is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -static float64 addFloat64Sigs( float64 a, float64 b, flag zSign ) +static float64 addFloat64Sigs( struct roundingData *roundData, float64 a, float64 b, flag zSign ) { int16 aExp, bExp, zExp; bits64 aSig, bSig, zSig; @@ -1985,7 +1984,7 @@ static float64 addFloat64Sigs( float64 a, float64 b, flag zSign ) ++zExp; } roundAndPack: - return roundAndPackFloat64( zSign, zExp, zSig ); + return roundAndPackFloat64( roundData, zSign, zExp, zSig ); } @@ -1998,7 +1997,7 @@ result is a NaN. The subtraction is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -static float64 subFloat64Sigs( float64 a, float64 b, flag zSign ) +static float64 subFloat64Sigs( struct roundingData *roundData, float64 a, float64 b, flag zSign ) { int16 aExp, bExp, zExp; bits64 aSig, bSig, zSig; @@ -2015,7 +2014,7 @@ static float64 subFloat64Sigs( float64 a, float64 b, flag zSign ) if ( expDiff < 0 ) goto bExpBigger; if ( aExp == 0x7FF ) { if ( aSig | bSig ) return propagateFloat64NaN( a, b ); - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } if ( aExp == 0 ) { @@ -2024,7 +2023,7 @@ static float64 subFloat64Sigs( float64 a, float64 b, flag zSign ) } if ( bSig < aSig ) goto aBigger; if ( aSig < bSig ) goto bBigger; - return packFloat64( float_rounding_mode == float_round_down, 0, 0 ); + return packFloat64( roundData->mode == float_round_down, 0, 0 ); bExpBigger: if ( bExp == 0x7FF ) { if ( bSig ) return propagateFloat64NaN( a, b ); @@ -2061,7 +2060,7 @@ static float64 subFloat64Sigs( float64 a, float64 b, flag zSign ) zExp = aExp; normalizeRoundAndPack: --zExp; - return normalizeRoundAndPackFloat64( zSign, zExp, zSig ); + return normalizeRoundAndPackFloat64( roundData, zSign, zExp, zSig ); } @@ -2072,17 +2071,17 @@ and `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float64 float64_add( float64 a, float64 b ) +float64 float64_add( struct roundingData *roundData, float64 a, float64 b ) { flag aSign, bSign; aSign = extractFloat64Sign( a ); bSign = extractFloat64Sign( b ); if ( aSign == bSign ) { - return addFloat64Sigs( a, b, aSign ); + return addFloat64Sigs( roundData, a, b, aSign ); } else { - return subFloat64Sigs( a, b, aSign ); + return subFloat64Sigs( roundData, a, b, aSign ); } } @@ -2094,17 +2093,17 @@ Returns the result of subtracting the double-precision floating-point values for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float64 float64_sub( float64 a, float64 b ) +float64 float64_sub( struct roundingData *roundData, float64 a, float64 b ) { flag aSign, bSign; aSign = extractFloat64Sign( a ); bSign = extractFloat64Sign( b ); if ( aSign == bSign ) { - return subFloat64Sigs( a, b, aSign ); + return subFloat64Sigs( roundData, a, b, aSign ); } else { - return addFloat64Sigs( a, b, aSign ); + return addFloat64Sigs( roundData, a, b, aSign ); } } @@ -2116,7 +2115,7 @@ Returns the result of multiplying the double-precision floating-point values for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float64 float64_mul( float64 a, float64 b ) +float64 float64_mul( struct roundingData *roundData, float64 a, float64 b ) { flag aSign, bSign, zSign; int16 aExp, bExp, zExp; @@ -2134,7 +2133,7 @@ float64 float64_mul( float64 a, float64 b ) return propagateFloat64NaN( a, b ); } if ( ( bExp | bSig ) == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } return packFloat64( zSign, 0x7FF, 0 ); @@ -2142,7 +2141,7 @@ float64 float64_mul( float64 a, float64 b ) if ( bExp == 0x7FF ) { if ( bSig ) return propagateFloat64NaN( a, b ); if ( ( aExp | aSig ) == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } return packFloat64( zSign, 0x7FF, 0 ); @@ -2164,7 +2163,7 @@ float64 float64_mul( float64 a, float64 b ) zSig0 <<= 1; --zExp; } - return roundAndPackFloat64( zSign, zExp, zSig0 ); + return roundAndPackFloat64( roundData, zSign, zExp, zSig0 ); } @@ -2175,7 +2174,7 @@ by the corresponding value `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float64 float64_div( float64 a, float64 b ) +float64 float64_div( struct roundingData *roundData, float64 a, float64 b ) { flag aSign, bSign, zSign; int16 aExp, bExp, zExp; @@ -2194,7 +2193,7 @@ float64 float64_div( float64 a, float64 b ) if ( aSig ) return propagateFloat64NaN( a, b ); if ( bExp == 0x7FF ) { if ( bSig ) return propagateFloat64NaN( a, b ); - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } return packFloat64( zSign, 0x7FF, 0 ); @@ -2206,10 +2205,10 @@ float64 float64_div( float64 a, float64 b ) if ( bExp == 0 ) { if ( bSig == 0 ) { if ( ( aExp | aSig ) == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } - float_raise( float_flag_divbyzero ); + roundData->exception |= float_flag_divbyzero; return packFloat64( zSign, 0x7FF, 0 ); } normalizeFloat64Subnormal( bSig, &bExp, &bSig ); @@ -2235,7 +2234,7 @@ float64 float64_div( float64 a, float64 b ) } zSig |= ( rem1 != 0 ); } - return roundAndPackFloat64( zSign, zExp, zSig ); + return roundAndPackFloat64( roundData, zSign, zExp, zSig ); } @@ -2246,7 +2245,7 @@ with respect to the corresponding value `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float64 float64_rem( float64 a, float64 b ) +float64 float64_rem( struct roundingData *roundData, float64 a, float64 b ) { flag aSign, bSign, zSign; int16 aExp, bExp, expDiff; @@ -2264,7 +2263,7 @@ float64 float64_rem( float64 a, float64 b ) if ( aSig || ( ( bExp == 0x7FF ) && bSig ) ) { return propagateFloat64NaN( a, b ); } - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } if ( bExp == 0x7FF ) { @@ -2273,7 +2272,7 @@ float64 float64_rem( float64 a, float64 b ) } if ( bExp == 0 ) { if ( bSig == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } normalizeFloat64Subnormal( bSig, &bExp, &bSig ); @@ -2321,7 +2320,7 @@ float64 float64_rem( float64 a, float64 b ) } zSign = ( (sbits64) aSig < 0 ); if ( zSign ) aSig = - aSig; - return normalizeRoundAndPackFloat64( aSign ^ zSign, bExp, aSig ); + return normalizeRoundAndPackFloat64( roundData, aSign ^ zSign, bExp, aSig ); } @@ -2332,7 +2331,7 @@ The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float64 float64_sqrt( float64 a ) +float64 float64_sqrt( struct roundingData *roundData, float64 a ) { flag aSign; int16 aExp, zExp; @@ -2346,12 +2345,12 @@ float64 float64_sqrt( float64 a ) if ( aExp == 0x7FF ) { if ( aSig ) return propagateFloat64NaN( a, a ); if ( ! aSign ) return a; - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } if ( aSign ) { if ( ( aExp | aSig ) == 0 ) return a; - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } if ( aExp == 0 ) { @@ -2382,7 +2381,7 @@ float64 float64_sqrt( float64 a ) } } shift64RightJamming( zSig, 1, &zSig ); - return roundAndPackFloat64( 0, zExp, zSig ); + return roundAndPackFloat64( roundData, 0, zExp, zSig ); } @@ -2546,7 +2545,7 @@ largest positive integer is returned. Otherwise, if the conversion overflows, the largest integer with the same sign as `a' is returned. ------------------------------------------------------------------------------- */ -int32 floatx80_to_int32( floatx80 a ) +int32 floatx80_to_int32( struct roundingData *roundData, floatx80 a ) { flag aSign; int32 aExp, shiftCount; @@ -2559,7 +2558,7 @@ int32 floatx80_to_int32( floatx80 a ) shiftCount = 0x4037 - aExp; if ( shiftCount <= 0 ) shiftCount = 1; shift64RightJamming( aSig, shiftCount, &aSig ); - return roundAndPackInt32( aSign, aSig ); + return roundAndPackInt32( roundData, aSign, aSig ); } @@ -2590,7 +2589,7 @@ int32 floatx80_to_int32_round_to_zero( floatx80 a ) goto invalid; } else if ( 63 < shiftCount ) { - if ( aExp || aSig ) float_exception_flags |= float_flag_inexact; + if ( aExp || aSig ) float_raise( float_flag_inexact ); return 0; } savedASig = aSig; @@ -2599,11 +2598,11 @@ int32 floatx80_to_int32_round_to_zero( floatx80 a ) if ( aSign ) z = - z; if ( ( z < 0 ) ^ aSign ) { invalid: - float_exception_flags |= float_flag_invalid; + float_raise( float_flag_invalid ); return aSign ? 0x80000000 : 0x7FFFFFFF; } if ( ( aSig<<shiftCount ) != savedASig ) { - float_exception_flags |= float_flag_inexact; + float_raise( float_flag_inexact ); } return z; @@ -2617,7 +2616,7 @@ conversion is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 floatx80_to_float32( floatx80 a ) +float32 floatx80_to_float32( struct roundingData *roundData, floatx80 a ) { flag aSign; int32 aExp; @@ -2634,7 +2633,7 @@ float32 floatx80_to_float32( floatx80 a ) } shift64RightJamming( aSig, 33, &aSig ); if ( aExp || aSig ) aExp -= 0x3F81; - return roundAndPackFloat32( aSign, aExp, aSig ); + return roundAndPackFloat32( roundData, aSign, aExp, aSig ); } @@ -2646,7 +2645,7 @@ conversion is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float64 floatx80_to_float64( floatx80 a ) +float64 floatx80_to_float64( struct roundingData *roundData, floatx80 a ) { flag aSign; int32 aExp; @@ -2663,7 +2662,7 @@ float64 floatx80_to_float64( floatx80 a ) } shift64RightJamming( aSig, 1, &zSig ); if ( aExp || aSig ) aExp -= 0x3C01; - return roundAndPackFloat64( aSign, aExp, zSig ); + return roundAndPackFloat64( roundData, aSign, aExp, zSig ); } @@ -2675,7 +2674,7 @@ value. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -floatx80 floatx80_round_to_int( floatx80 a ) +floatx80 floatx80_round_to_int( struct roundingData *roundData, floatx80 a ) { flag aSign; int32 aExp; @@ -2695,9 +2694,9 @@ floatx80 floatx80_round_to_int( floatx80 a ) && ( (bits64) ( extractFloatx80Frac( a )<<1 ) == 0 ) ) { return a; } - float_exception_flags |= float_flag_inexact; + roundData->exception |= float_flag_inexact; aSign = extractFloatx80Sign( a ); - switch ( float_rounding_mode ) { + switch ( roundData->mode ) { case float_round_nearest_even: if ( ( aExp == 0x3FFE ) && (bits64) ( extractFloatx80Frac( a )<<1 ) ) { @@ -2721,7 +2720,7 @@ floatx80 floatx80_round_to_int( floatx80 a ) lastBitMask <<= 0x403E - aExp; roundBitsMask = lastBitMask - 1; z = a; - roundingMode = float_rounding_mode; + roundingMode = roundData->mode; if ( roundingMode == float_round_nearest_even ) { z.low += lastBitMask>>1; if ( ( z.low & roundBitsMask ) == 0 ) z.low &= ~ lastBitMask; @@ -2736,7 +2735,7 @@ floatx80 floatx80_round_to_int( floatx80 a ) ++z.high; z.low = LIT64( 0x8000000000000000 ); } - if ( z.low != a.low ) float_exception_flags |= float_flag_inexact; + if ( z.low != a.low ) roundData->exception |= float_flag_inexact; return z; } @@ -2750,7 +2749,7 @@ The addition is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -static floatx80 addFloatx80Sigs( floatx80 a, floatx80 b, flag zSign ) +static floatx80 addFloatx80Sigs( struct roundingData *roundData, floatx80 a, floatx80 b, flag zSign ) { int32 aExp, bExp, zExp; bits64 aSig, bSig, zSig0, zSig1; @@ -2806,7 +2805,7 @@ static floatx80 addFloatx80Sigs( floatx80 a, floatx80 b, flag zSign ) roundAndPack: return roundAndPackFloatx80( - floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 ); + roundData, zSign, zExp, zSig0, zSig1 ); } @@ -2819,7 +2818,7 @@ result is a NaN. The subtraction is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -static floatx80 subFloatx80Sigs( floatx80 a, floatx80 b, flag zSign ) +static floatx80 subFloatx80Sigs( struct roundingData *roundData, floatx80 a, floatx80 b, flag zSign ) { int32 aExp, bExp, zExp; bits64 aSig, bSig, zSig0, zSig1; @@ -2837,7 +2836,7 @@ static floatx80 subFloatx80Sigs( floatx80 a, floatx80 b, flag zSign ) if ( (bits64) ( ( aSig | bSig )<<1 ) ) { return propagateFloatx80NaN( a, b ); } - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; return z; @@ -2849,7 +2848,7 @@ static floatx80 subFloatx80Sigs( floatx80 a, floatx80 b, flag zSign ) zSig1 = 0; if ( bSig < aSig ) goto aBigger; if ( aSig < bSig ) goto bBigger; - return packFloatx80( float_rounding_mode == float_round_down, 0, 0 ); + return packFloatx80( roundData->mode == float_round_down, 0, 0 ); bExpBigger: if ( bExp == 0x7FFF ) { if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b ); @@ -2875,7 +2874,7 @@ static floatx80 subFloatx80Sigs( floatx80 a, floatx80 b, flag zSign ) normalizeRoundAndPack: return normalizeRoundAndPackFloatx80( - floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 ); + roundData, zSign, zExp, zSig0, zSig1 ); } @@ -2886,17 +2885,17 @@ values `a' and `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -floatx80 floatx80_add( floatx80 a, floatx80 b ) +floatx80 floatx80_add( struct roundingData *roundData, floatx80 a, floatx80 b ) { flag aSign, bSign; aSign = extractFloatx80Sign( a ); bSign = extractFloatx80Sign( b ); if ( aSign == bSign ) { - return addFloatx80Sigs( a, b, aSign ); + return addFloatx80Sigs( roundData, a, b, aSign ); } else { - return subFloatx80Sigs( a, b, aSign ); + return subFloatx80Sigs( roundData, a, b, aSign ); } } @@ -2908,17 +2907,17 @@ point values `a' and `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -floatx80 floatx80_sub( floatx80 a, floatx80 b ) +floatx80 floatx80_sub( struct roundingData *roundData, floatx80 a, floatx80 b ) { flag aSign, bSign; aSign = extractFloatx80Sign( a ); bSign = extractFloatx80Sign( b ); if ( aSign == bSign ) { - return subFloatx80Sigs( a, b, aSign ); + return subFloatx80Sigs( roundData, a, b, aSign ); } else { - return addFloatx80Sigs( a, b, aSign ); + return addFloatx80Sigs( roundData, a, b, aSign ); } } @@ -2930,7 +2929,7 @@ point values `a' and `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -floatx80 floatx80_mul( floatx80 a, floatx80 b ) +floatx80 floatx80_mul( struct roundingData *roundData, floatx80 a, floatx80 b ) { flag aSign, bSign, zSign; int32 aExp, bExp, zExp; @@ -2956,7 +2955,7 @@ floatx80 floatx80_mul( floatx80 a, floatx80 b ) if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b ); if ( ( aExp | aSig ) == 0 ) { invalid: - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; return z; @@ -2979,7 +2978,7 @@ floatx80 floatx80_mul( floatx80 a, floatx80 b ) } return roundAndPackFloatx80( - floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 ); + roundData, zSign, zExp, zSig0, zSig1 ); } @@ -2990,7 +2989,7 @@ value `a' by the corresponding value `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -floatx80 floatx80_div( floatx80 a, floatx80 b ) +floatx80 floatx80_div( struct roundingData *roundData, floatx80 a, floatx80 b ) { flag aSign, bSign, zSign; int32 aExp, bExp, zExp; @@ -3021,12 +3020,12 @@ floatx80 floatx80_div( floatx80 a, floatx80 b ) if ( bSig == 0 ) { if ( ( aExp | aSig ) == 0 ) { invalid: - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; return z; } - float_raise( float_flag_divbyzero ); + roundData->exception |= float_flag_divbyzero; return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) ); } normalizeFloatx80Subnormal( bSig, &bExp, &bSig ); @@ -3060,7 +3059,7 @@ floatx80 floatx80_div( floatx80 a, floatx80 b ) } return roundAndPackFloatx80( - floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 ); + roundData, zSign, zExp, zSig0, zSig1 ); } @@ -3071,7 +3070,7 @@ Returns the remainder of the extended double-precision floating-point value according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -floatx80 floatx80_rem( floatx80 a, floatx80 b ) +floatx80 floatx80_rem( struct roundingData *roundData, floatx80 a, floatx80 b ) { flag aSign, bSign, zSign; int32 aExp, bExp, expDiff; @@ -3099,7 +3098,7 @@ floatx80 floatx80_rem( floatx80 a, floatx80 b ) if ( bExp == 0 ) { if ( bSig == 0 ) { invalid: - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; return z; @@ -3156,9 +3155,10 @@ floatx80 floatx80_rem( floatx80 a, floatx80 b ) aSig1 = alternateASig1; zSign = ! zSign; } + return normalizeRoundAndPackFloatx80( - 80, zSign, bExp + expDiff, aSig0, aSig1 ); + roundData, zSign, bExp + expDiff, aSig0, aSig1 ); } @@ -3169,7 +3169,7 @@ value `a'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -floatx80 floatx80_sqrt( floatx80 a ) +floatx80 floatx80_sqrt( struct roundingData *roundData, floatx80 a ) { flag aSign; int32 aExp, zExp; @@ -3189,7 +3189,7 @@ floatx80 floatx80_sqrt( floatx80 a ) if ( aSign ) { if ( ( aExp | aSig0 ) == 0 ) return a; invalid: - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; return z; @@ -3234,7 +3234,7 @@ floatx80 floatx80_sqrt( floatx80 a ) } return roundAndPackFloatx80( - floatx80_rounding_precision, 0, zExp, zSig0, zSig1 ); + roundData, 0, zExp, zSig0, zSig1 ); } @@ -3256,7 +3256,7 @@ flag floatx80_eq( floatx80 a, floatx80 b ) ) { if ( floatx80_is_signaling_nan( a ) || floatx80_is_signaling_nan( b ) ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; } return 0; } @@ -3286,7 +3286,7 @@ flag floatx80_le( floatx80 a, floatx80 b ) || ( ( extractFloatx80Exp( b ) == 0x7FFF ) && (bits64) ( extractFloatx80Frac( b )<<1 ) ) ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return 0; } aSign = extractFloatx80Sign( a ); @@ -3320,7 +3320,7 @@ flag floatx80_lt( floatx80 a, floatx80 b ) || ( ( extractFloatx80Exp( b ) == 0x7FFF ) && (bits64) ( extractFloatx80Frac( b )<<1 ) ) ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return 0; } aSign = extractFloatx80Sign( a ); @@ -3353,7 +3353,7 @@ flag floatx80_eq_signaling( floatx80 a, floatx80 b ) || ( ( extractFloatx80Exp( b ) == 0x7FFF ) && (bits64) ( extractFloatx80Frac( b )<<1 ) ) ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return 0; } return @@ -3384,7 +3384,7 @@ flag floatx80_le_quiet( floatx80 a, floatx80 b ) ) { if ( floatx80_is_signaling_nan( a ) || floatx80_is_signaling_nan( b ) ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; } return 0; } @@ -3421,7 +3421,7 @@ flag floatx80_lt_quiet( floatx80 a, floatx80 b ) ) { if ( floatx80_is_signaling_nan( a ) || floatx80_is_signaling_nan( b ) ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; } return 0; } diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h index 1e1743173899..1c8799b9ee4d 100644 --- a/arch/arm/nwfpe/softfloat.h +++ b/arch/arm/nwfpe/softfloat.h @@ -74,7 +74,7 @@ enum { Software IEC/IEEE floating-point rounding mode. ------------------------------------------------------------------------------- */ -extern signed char float_rounding_mode; +//extern int8 float_rounding_mode; enum { float_round_nearest_even = 0, float_round_to_zero = 1, @@ -86,7 +86,6 @@ enum { ------------------------------------------------------------------------------- Software IEC/IEEE floating-point exception flags. ------------------------------------------------------------------------------- -extern signed char float_exception_flags; enum { float_flag_inexact = 1, float_flag_underflow = 2, @@ -99,7 +98,6 @@ ScottB: November 4, 1998 Changed the enumeration to match the bit order in the FPA11. */ -extern signed char float_exception_flags; enum { float_flag_invalid = 1, float_flag_divbyzero = 2, @@ -121,7 +119,7 @@ void float_raise( signed char ); Software IEC/IEEE integer-to-floating-point conversion routines. ------------------------------------------------------------------------------- */ -float32 int32_to_float32( signed int ); +float32 int32_to_float32( struct roundingData *, signed int ); float64 int32_to_float64( signed int ); #ifdef FLOATX80 floatx80 int32_to_floatx80( signed int ); @@ -132,7 +130,7 @@ floatx80 int32_to_floatx80( signed int ); Software IEC/IEEE single-precision conversion routines. ------------------------------------------------------------------------------- */ -signed int float32_to_int32( float32 ); +signed int float32_to_int32( struct roundingData *, float32 ); signed int float32_to_int32_round_to_zero( float32 ); float64 float32_to_float64( float32 ); #ifdef FLOATX80 @@ -144,13 +142,13 @@ floatx80 float32_to_floatx80( float32 ); Software IEC/IEEE single-precision operations. ------------------------------------------------------------------------------- */ -float32 float32_round_to_int( float32 ); -float32 float32_add( float32, float32 ); -float32 float32_sub( float32, float32 ); -float32 float32_mul( float32, float32 ); -float32 float32_div( float32, float32 ); -float32 float32_rem( float32, float32 ); -float32 float32_sqrt( float32 ); +float32 float32_round_to_int( struct roundingData*, float32 ); +float32 float32_add( struct roundingData *, float32, float32 ); +float32 float32_sub( struct roundingData *, float32, float32 ); +float32 float32_mul( struct roundingData *, float32, float32 ); +float32 float32_div( struct roundingData *, float32, float32 ); +float32 float32_rem( struct roundingData *, float32, float32 ); +float32 float32_sqrt( struct roundingData*, float32 ); char float32_eq( float32, float32 ); char float32_le( float32, float32 ); char float32_lt( float32, float32 ); @@ -164,9 +162,9 @@ char float32_is_signaling_nan( float32 ); Software IEC/IEEE double-precision conversion routines. ------------------------------------------------------------------------------- */ -signed int float64_to_int32( float64 ); +signed int float64_to_int32( struct roundingData *, float64 ); signed int float64_to_int32_round_to_zero( float64 ); -float32 float64_to_float32( float64 ); +float32 float64_to_float32( struct roundingData *, float64 ); #ifdef FLOATX80 floatx80 float64_to_floatx80( float64 ); #endif @@ -176,13 +174,13 @@ floatx80 float64_to_floatx80( float64 ); Software IEC/IEEE double-precision operations. ------------------------------------------------------------------------------- */ -float64 float64_round_to_int( float64 ); -float64 float64_add( float64, float64 ); -float64 float64_sub( float64, float64 ); -float64 float64_mul( float64, float64 ); -float64 float64_div( float64, float64 ); -float64 float64_rem( float64, float64 ); -float64 float64_sqrt( float64 ); +float64 float64_round_to_int( struct roundingData *, float64 ); +float64 float64_add( struct roundingData *, float64, float64 ); +float64 float64_sub( struct roundingData *, float64, float64 ); +float64 float64_mul( struct roundingData *, float64, float64 ); +float64 float64_div( struct roundingData *, float64, float64 ); +float64 float64_rem( struct roundingData *, float64, float64 ); +float64 float64_sqrt( struct roundingData *, float64 ); char float64_eq( float64, float64 ); char float64_le( float64, float64 ); char float64_lt( float64, float64 ); @@ -198,31 +196,23 @@ char float64_is_signaling_nan( float64 ); Software IEC/IEEE extended double-precision conversion routines. ------------------------------------------------------------------------------- */ -signed int floatx80_to_int32( floatx80 ); +signed int floatx80_to_int32( struct roundingData *, floatx80 ); signed int floatx80_to_int32_round_to_zero( floatx80 ); -float32 floatx80_to_float32( floatx80 ); -float64 floatx80_to_float64( floatx80 ); - -/* -------------------------------------------------------------------------------- -Software IEC/IEEE extended double-precision rounding precision. Valid -values are 32, 64, and 80. -------------------------------------------------------------------------------- -*/ -extern signed char floatx80_rounding_precision; +float32 floatx80_to_float32( struct roundingData *, floatx80 ); +float64 floatx80_to_float64( struct roundingData *, floatx80 ); /* ------------------------------------------------------------------------------- Software IEC/IEEE extended double-precision operations. ------------------------------------------------------------------------------- */ -floatx80 floatx80_round_to_int( floatx80 ); -floatx80 floatx80_add( floatx80, floatx80 ); -floatx80 floatx80_sub( floatx80, floatx80 ); -floatx80 floatx80_mul( floatx80, floatx80 ); -floatx80 floatx80_div( floatx80, floatx80 ); -floatx80 floatx80_rem( floatx80, floatx80 ); -floatx80 floatx80_sqrt( floatx80 ); +floatx80 floatx80_round_to_int( struct roundingData *, floatx80 ); +floatx80 floatx80_add( struct roundingData *, floatx80, floatx80 ); +floatx80 floatx80_sub( struct roundingData *, floatx80, floatx80 ); +floatx80 floatx80_mul( struct roundingData *, floatx80, floatx80 ); +floatx80 floatx80_div( struct roundingData *, floatx80, floatx80 ); +floatx80 floatx80_rem( struct roundingData *, floatx80, floatx80 ); +floatx80 floatx80_sqrt( struct roundingData *, floatx80 ); char floatx80_eq( floatx80, floatx80 ); char floatx80_le( floatx80, floatx80 ); char floatx80_lt( floatx80, floatx80 ); diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile index ba1a6e9f2b28..8ffb523e6c77 100644 --- a/arch/arm/oprofile/Makefile +++ b/arch/arm/oprofile/Makefile @@ -6,6 +6,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ oprofilefs.o oprofile_stats.o \ timer_int.o ) -oprofile-y := $(DRIVER_OBJS) init.o +oprofile-y := $(DRIVER_OBJS) init.o backtrace.o oprofile-$(CONFIG_CPU_XSCALE) += common.o op_model_xscale.o diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c new file mode 100644 index 000000000000..df35c452a8bf --- /dev/null +++ b/arch/arm/oprofile/backtrace.c @@ -0,0 +1,144 @@ +/* + * Arm specific backtracing code for oprofile + * + * Copyright 2005 Openedhand Ltd. + * + * Author: Richard Purdie <rpurdie@openedhand.com> + * + * Based on i386 oprofile backtrace code by John Levon, David Smith + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/oprofile.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <asm/ptrace.h> +#include <asm/uaccess.h> + + +/* + * The registers we're interested in are at the end of the variable + * length saved register structure. The fp points at the end of this + * structure so the address of this struct is: + * (struct frame_tail *)(xxx->fp)-1 + */ +struct frame_tail { + struct frame_tail *fp; + unsigned long sp; + unsigned long lr; +} __attribute__((packed)); + + +#ifdef CONFIG_FRAME_POINTER +static struct frame_tail* kernel_backtrace(struct frame_tail *tail) +{ + oprofile_add_trace(tail->lr); + + /* frame pointers should strictly progress back up the stack + * (towards higher addresses) */ + if (tail >= tail->fp) + return NULL; + + return tail->fp-1; +} +#endif + +static struct frame_tail* user_backtrace(struct frame_tail *tail) +{ + struct frame_tail buftail; + + /* hardware pte might not be valid due to dirty/accessed bit emulation + * so we use copy_from_user and benefit from exception fixups */ + if (copy_from_user(&buftail, tail, sizeof(struct frame_tail))) + return NULL; + + oprofile_add_trace(buftail.lr); + + /* frame pointers should strictly progress back up the stack + * (towards higher addresses) */ + if (tail >= buftail.fp) + return NULL; + + return buftail.fp-1; +} + +/* Compare two addresses and see if they're on the same page */ +#define CMP_ADDR_EQUAL(x,y,offset) ((((unsigned long) x) >> PAGE_SHIFT) \ + == ((((unsigned long) y) + offset) >> PAGE_SHIFT)) + +/* check that the page(s) containing the frame tail are present */ +static int pages_present(struct frame_tail *tail) +{ + struct mm_struct * mm = current->mm; + + if (!check_user_page_readable(mm, (unsigned long)tail)) + return 0; + + if (CMP_ADDR_EQUAL(tail, tail, 8)) + return 1; + + if (!check_user_page_readable(mm, ((unsigned long)tail) + 8)) + return 0; + + return 1; +} + +/* + * | | /\ Higher addresses + * | | + * --------------- stack base (address of current_thread_info) + * | thread info | + * . . + * | stack | + * --------------- saved regs->ARM_fp value if valid (frame_tail address) + * . . + * --------------- struct pt_regs stored on stack (struct pt_regs *) + * | | + * . . + * | | + * --------------- %esp + * | | + * | | \/ Lower addresses + * + * Thus, &pt_regs <-> stack base restricts the valid(ish) fp values + */ +static int valid_kernel_stack(struct frame_tail *tail, struct pt_regs *regs) +{ + unsigned long tailaddr = (unsigned long)tail; + unsigned long stack = (unsigned long)regs; + unsigned long stack_base = (stack & ~(THREAD_SIZE - 1)) + THREAD_SIZE; + + return (tailaddr > stack) && (tailaddr < stack_base); +} + +void arm_backtrace(struct pt_regs * const regs, unsigned int depth) +{ + struct frame_tail *tail; + unsigned long last_address = 0; + + tail = ((struct frame_tail *) regs->ARM_fp) - 1; + + if (!user_mode(regs)) { + +#ifdef CONFIG_FRAME_POINTER + while (depth-- && tail && valid_kernel_stack(tail, regs)) { + tail = kernel_backtrace(tail); + } +#endif + return; + } + + while (depth-- && tail && !((unsigned long) tail & 3)) { + if ((!CMP_ADDR_EQUAL(last_address, tail, 0) + || !CMP_ADDR_EQUAL(last_address, tail, 8)) + && !pages_present(tail)) + return; + last_address = (unsigned long) tail; + tail = user_backtrace(tail); + } +} + diff --git a/arch/arm/oprofile/init.c b/arch/arm/oprofile/init.c index cce3d3015eb7..d315a3a86c86 100644 --- a/arch/arm/oprofile/init.c +++ b/arch/arm/oprofile/init.c @@ -20,6 +20,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) ret = pmu_init(ops, &op_xscale_spec); #endif + ops->backtrace = arm_backtrace; + return ret; } diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h index 2d4caf4781ad..2148d07484b7 100644 --- a/arch/arm/oprofile/op_arm_model.h +++ b/arch/arm/oprofile/op_arm_model.h @@ -24,6 +24,8 @@ struct op_arm_model_spec { extern struct op_arm_model_spec op_xscale_spec; #endif +extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth); + extern int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec); extern void pmu_exit(void); #endif /* OP_ARM_MODEL_H */ diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig new file mode 100644 index 000000000000..345365852f8c --- /dev/null +++ b/arch/arm/plat-omap/Kconfig @@ -0,0 +1,112 @@ +if ARCH_OMAP + +menu "TI OMAP Implementations" + +config ARCH_OMAP_OTG + bool + +choice + prompt "OMAP System Type" + default ARCH_OMAP1 + +config ARCH_OMAP1 + bool "TI OMAP1" + +config ARCH_OMAP2 + bool "TI OMAP2" + +endchoice + +comment "OMAP Feature Selections" + +config OMAP_RESET_CLOCKS + bool "Reset unused clocks during boot" + depends on ARCH_OMAP + default n + help + Say Y if you want to reset unused clocks during boot. + This option saves power, but assumes all drivers are + using the clock framework. Broken drivers that do not + yet use clock framework may not work with this option. + If you are booting from another operating system, you + probably do not want this option enabled until your + device drivers work properly. + +config OMAP_MUX + bool "OMAP multiplexing support" + depends on ARCH_OMAP + default y + help + Pin multiplexing support for OMAP boards. If your bootloader + sets the multiplexing correctly, say N. Otherwise, or if unsure, + say Y. + +config OMAP_MUX_DEBUG + bool "Multiplexing debug output" + depends on OMAP_MUX + default n + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. + +config OMAP_MUX_WARNINGS + bool "Warn about pins the bootloader didn't set up" + depends on OMAP_MUX + default y + help + Choose Y here to warn whenever driver initialization logic needs + to change the pin multiplexing setup. When there are no warnings + printed, it's safe to deselect OMAP_MUX for your product. + +choice + prompt "System timer" + default OMAP_MPU_TIMER + +config OMAP_MPU_TIMER + bool "Use mpu timer" + help + Select this option if you want to use the OMAP mpu timer. This + timer provides more intra-tick resolution than the 32KHz timer, + but consumes more power. + +config OMAP_32K_TIMER + bool "Use 32KHz timer" + depends on ARCH_OMAP16XX + help + Select this option if you want to enable the OMAP 32KHz timer. + This timer saves power compared to the OMAP_MPU_TIMER, and has + support for no tick during idle. The 32KHz timer provides less + intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is + currently only available for OMAP-16xx. + +endchoice + +config OMAP_32K_TIMER_HZ + int "Kernel internal timer frequency for 32KHz timer" + range 32 1024 + depends on OMAP_32K_TIMER + default "128" + help + Kernel internal timer frequency should be a divisor of 32768, + such as 64 or 128. + +choice + prompt "Low-level debug console UART" + depends on ARCH_OMAP + default OMAP_LL_DEBUG_UART1 + +config OMAP_LL_DEBUG_UART1 + bool "UART1" + +config OMAP_LL_DEBUG_UART2 + bool "UART2" + +config OMAP_LL_DEBUG_UART3 + bool "UART3" + +endchoice + +endmenu + +endif diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile new file mode 100644 index 000000000000..531e11af54d4 --- /dev/null +++ b/arch/arm/plat-omap/Makefile @@ -0,0 +1,17 @@ +# +# Makefile for the linux kernel. +# + +# Common support +obj-y := common.o dma.o clock.o mux.o gpio.o mcbsp.o usb.o +obj-m := +obj-n := +obj- := + +# OCPI interconnect support for 1710, 1610 and 5912 +obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o + +# Power Management +obj-$(CONFIG_PM) += pm.o sleep.o + +obj-$(CONFIG_CPU_FREQ) += cpu-omap.o diff --git a/arch/arm/mach-omap/clock.c b/arch/arm/plat-omap/clock.c index e91186b5341a..59d91b3262ba 100644 --- a/arch/arm/mach-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/clock.c + * linux/arch/arm/plat-omap/clock.c * * Copyright (C) 2004 Nokia corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> @@ -14,6 +14,7 @@ #include <linux/errno.h> #include <linux/err.h> +#include <asm/io.h> #include <asm/semaphore.h> #include <asm/hardware/clock.h> #include <asm/arch/board.h> @@ -25,6 +26,8 @@ static LIST_HEAD(clocks); static DECLARE_MUTEX(clocks_sem); static DEFINE_SPINLOCK(clockfw_lock); static void propagate_rate(struct clk * clk); +/* UART clock function */ +static int set_uart_rate(struct clk * clk, unsigned long rate); /* External clock (MCLK & BCLK) functions */ static int set_ext_clk_rate(struct clk * clk, unsigned long rate); static long round_ext_clk_rate(struct clk * clk, unsigned long rate); @@ -34,7 +37,7 @@ static int select_table_rate(struct clk * clk, unsigned long rate); static long round_to_table_rate(struct clk * clk, unsigned long rate); void clk_setdpll(__u16, __u16); -struct mpu_rate rate_table[] = { +static struct mpu_rate rate_table[] = { /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv */ @@ -48,7 +51,7 @@ struct mpu_rate rate_table[] = { { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ - { 48000000, 12000000, 192000000, 0x0ccf, 0x2810 }, /* 4/4/4/4/8/8 */ + { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/8/4/4/8/8 */ { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ #endif #if defined(CONFIG_OMAP_ARM_182MHZ) @@ -58,7 +61,7 @@ struct mpu_rate rate_table[] = { { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ #endif #if defined(CONFIG_OMAP_ARM_150MHZ) - { 150000000, 12000000, 150000000, 0x150a, 0x2cb0 }, /* 0/0/1/1/2/2 */ + { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ #endif #if defined(CONFIG_OMAP_ARM_120MHZ) { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ @@ -76,19 +79,11 @@ struct mpu_rate rate_table[] = { }; -static void ckctl_recalc(struct clk * clk) -{ - int dsor; - - /* Calculate divisor encoded as 2-bit exponent */ - dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); - if (unlikely(clk->rate == clk->parent->rate / dsor)) - return; /* No change, quick exit */ - clk->rate = clk->parent->rate / dsor; - - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); -} +static void ckctl_recalc(struct clk * clk); +int __clk_enable(struct clk *clk); +void __clk_disable(struct clk *clk); +void __clk_unuse(struct clk *clk); +int __clk_use(struct clk *clk); static void followparent_recalc(struct clk * clk) @@ -102,6 +97,14 @@ static void watchdog_recalc(struct clk * clk) clk->rate = clk->parent->rate / 14; } +static void uart_recalc(struct clk * clk) +{ + unsigned int val = omap_readl(clk->enable_reg); + if (val & clk->enable_bit) + clk->rate = 48000000; + else + clk->rate = 12000000; +} static struct clk ck_ref = { .name = "ck_ref", @@ -138,7 +141,7 @@ static struct clk arm_ck = { static struct clk armper_ck = { .name = "armper_ck", .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + .flags = CLOCK_IN_OMAP730 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_CKCTL, .enable_reg = ARM_IDLECT2, .enable_bit = EN_PERCK, @@ -185,7 +188,7 @@ static struct clk armwdt_ck = { static struct clk arminth_ck16xx = { .name = "arminth_ck", .parent = &arm_ck, - .flags = CLOCK_IN_OMAP16XX, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, /* Note: On 16xx the frequency can be divided by 2 by programming * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 @@ -214,6 +217,38 @@ static struct clk dspmmu_ck = { .recalc = &ckctl_recalc, }; +static struct clk dspper_ck = { + .name = "dspper_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL | DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &followparent_recalc, + //.recalc = &ckctl_recalc, +}; + +static struct clk dspxor_ck = { + .name = "dspxor_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, +}; + +static struct clk dsptim_ck = { + .name = "dsptim_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_DSPTIMCK, + .recalc = &followparent_recalc, +}; + static struct clk tc_ck = { .name = "tc_ck", .parent = &ck_dpll1, @@ -226,7 +261,7 @@ static struct clk tc_ck = { static struct clk arminth_ck1510 = { .name = "arminth_ck", .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510, + .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, .recalc = &followparent_recalc, /* Note: On 1510 the frequency follows TC_CK * @@ -237,7 +272,7 @@ static struct clk arminth_ck1510 = { static struct clk tipb_ck = { .name = "tibp_ck", .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510, + .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, .recalc = &followparent_recalc, }; @@ -271,14 +306,15 @@ static struct clk tc2_ck = { static struct clk dma_ck = { .name = "dma_ck", .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + ALWAYS_ENABLED, .recalc = &followparent_recalc, }; static struct clk dma_lcdfree_ck = { .name = "dma_lcdfree_ck", .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, }; @@ -303,14 +339,14 @@ static struct clk lb_ck = { static struct clk rhea1_ck = { .name = "rhea1_ck", .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, }; static struct clk rhea2_ck = { .name = "rhea2_ck", .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, }; @@ -325,43 +361,55 @@ static struct clk lcd_ck = { .recalc = &ckctl_recalc, }; -static struct clk uart1_ck = { +static struct clk uart1_1510 = { + .name = "uart1_ck", + /* Direct from ULPD, no parent */ + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED, + .enable_reg = MOD_CONF_CTRL_0, + .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ + .set_rate = &set_uart_rate, + .recalc = &uart_recalc, +}; + +static struct clk uart1_16xx = { .name = "uart1_ck", /* Direct from ULPD, no parent */ .rate = 48000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT, .enable_reg = MOD_CONF_CTRL_0, .enable_bit = 29, - /* (Only on 1510) - * The "enable bit" actually chooses between 48MHz and 12MHz. - */ }; static struct clk uart2_ck = { .name = "uart2_ck", /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT, .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 30, - /* (for both 1510 and 16xx) - * The "enable bit" actually chooses between 48MHz and 12MHz/32kHz. - */ + .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ + .set_rate = &set_uart_rate, + .recalc = &uart_recalc, }; -static struct clk uart3_ck = { +static struct clk uart3_1510 = { + .name = "uart3_ck", + /* Direct from ULPD, no parent */ + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED, + .enable_reg = MOD_CONF_CTRL_0, + .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ + .set_rate = &set_uart_rate, + .recalc = &uart_recalc, +}; + +static struct clk uart3_16xx = { .name = "uart3_ck", /* Direct from ULPD, no parent */ .rate = 48000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT, .enable_reg = MOD_CONF_CTRL_0, .enable_bit = 31, - /* (Only on 1510) - * The "enable bit" actually chooses between 48MHz and 12MHz. - */ }; static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ @@ -480,6 +528,9 @@ static struct clk * onchip_clks[] = { /* CK_GEN2 clocks */ &dsp_ck, &dspmmu_ck, + &dspper_ck, + &dspxor_ck, + &dsptim_ck, /* CK_GEN3 clocks */ &tc_ck, &tipb_ck, @@ -494,9 +545,11 @@ static struct clk * onchip_clks[] = { &rhea2_ck, &lcd_ck, /* ULPD clocks */ - &uart1_ck, + &uart1_1510, + &uart1_16xx, &uart2_ck, - &uart3_ck, + &uart3_1510, + &uart3_16xx, &usb_clko, &usb_hhc_ck1510, &usb_hhc_ck16xx, &mclk_1510, &mclk_16xx, @@ -547,14 +600,34 @@ int __clk_enable(struct clk *clk) return 0; } + if (clk->flags & DSP_DOMAIN_CLOCK) { + __clk_use(&api_ck); + } + if (clk->flags & ENABLE_REG_32BIT) { - regval32 = omap_readl(clk->enable_reg); - regval32 |= (1 << clk->enable_bit); - omap_writel(regval32, clk->enable_reg); + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval32 = __raw_readl(clk->enable_reg); + regval32 |= (1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); + } else { + regval32 = omap_readl(clk->enable_reg); + regval32 |= (1 << clk->enable_bit); + omap_writel(regval32, clk->enable_reg); + } } else { - regval16 = omap_readw(clk->enable_reg); - regval16 |= (1 << clk->enable_bit); - omap_writew(regval16, clk->enable_reg); + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval16 = __raw_readw(clk->enable_reg); + regval16 |= (1 << clk->enable_bit); + __raw_writew(regval16, clk->enable_reg); + } else { + regval16 = omap_readw(clk->enable_reg); + regval16 |= (1 << clk->enable_bit); + omap_writew(regval16, clk->enable_reg); + } + } + + if (clk->flags & DSP_DOMAIN_CLOCK) { + __clk_unuse(&api_ck); } return 0; @@ -569,14 +642,34 @@ void __clk_disable(struct clk *clk) if (clk->enable_reg == 0) return; + if (clk->flags & DSP_DOMAIN_CLOCK) { + __clk_use(&api_ck); + } + if (clk->flags & ENABLE_REG_32BIT) { - regval32 = omap_readl(clk->enable_reg); - regval32 &= ~(1 << clk->enable_bit); - omap_writel(regval32, clk->enable_reg); + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval32 = __raw_readl(clk->enable_reg); + regval32 &= ~(1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); + } else { + regval32 = omap_readl(clk->enable_reg); + regval32 &= ~(1 << clk->enable_bit); + omap_writel(regval32, clk->enable_reg); + } } else { - regval16 = omap_readw(clk->enable_reg); - regval16 &= ~(1 << clk->enable_bit); - omap_writew(regval16, clk->enable_reg); + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval16 = __raw_readw(clk->enable_reg); + regval16 &= ~(1 << clk->enable_bit); + __raw_writew(regval16, clk->enable_reg); + } else { + regval16 = omap_readw(clk->enable_reg); + regval16 &= ~(1 << clk->enable_bit); + omap_writew(regval16, clk->enable_reg); + } + } + + if (clk->flags & DSP_DOMAIN_CLOCK) { + __clk_unuse(&api_ck); } } @@ -766,6 +859,33 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate) return dsor_exp; } + +static void ckctl_recalc(struct clk * clk) +{ + int dsor; + + /* Calculate divisor encoded as 2-bit exponent */ + if (clk->flags & DSP_DOMAIN_CLOCK) { + /* The clock control bits are in DSP domain, + * so api_ck is needed for access. + * Note that DSP_CKCTL virt addr = phys addr, so + * we must use __raw_readw() instead of omap_readw(). + */ + __clk_use(&api_ck); + dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); + __clk_unuse(&api_ck); + } else { + dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); + } + if (unlikely(clk->rate == clk->parent->rate / dsor)) + return; /* No change, quick exit */ + clk->rate = clk->parent->rate / dsor; + + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); +} + + long clk_round_rate(struct clk *clk, unsigned long rate) { int dsor_exp; @@ -826,6 +946,9 @@ static int select_table_rate(struct clk * clk, unsigned long rate) if (!ptr->rate) return -EINVAL; + if (!ptr->rate) + return -EINVAL; + if (unlikely(ck_dpll1.rate == 0)) { omap_writew(ptr->dpllctl_val, DPLL_CTL); ck_dpll1.rate = ptr->pll_rate; @@ -921,6 +1044,23 @@ static unsigned calc_ext_dsor(unsigned long rate) return dsor; } +/* Only needed on 1510 */ +static int set_uart_rate(struct clk * clk, unsigned long rate) +{ + unsigned int val; + + val = omap_readl(clk->enable_reg); + if (rate == 12000000) + val &= ~(1 << clk->enable_bit); + else if (rate == 48000000) + val |= (1 << clk->enable_bit); + else + return -EINVAL; + omap_writel(val, clk->enable_reg); + clk->rate = rate; + + return 0; +} static int set_ext_clk_rate(struct clk * clk, unsigned long rate) { @@ -985,7 +1125,18 @@ void clk_unregister(struct clk *clk) } EXPORT_SYMBOL(clk_unregister); - +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Resets some clocks that may be left on from bootloader, + * but leaves serial clocks on. See also omap_late_clk_reset(). + */ +static inline void omap_early_clk_reset(void) +{ + //omap_writel(0x3 << 29, MOD_CONF_CTRL_0); +} +#else +#define omap_early_clk_reset() {} +#endif int __init clk_init(void) { @@ -993,6 +1144,8 @@ int __init clk_init(void) const struct omap_clock_config *info; int crystal_type = 0; /* Default 12 MHz */ + omap_early_clk_reset(); + for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) { if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) { clk_register(*clkp); @@ -1023,9 +1176,42 @@ int __init clk_init(void) ck_ref.rate = 19200000; #endif + printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", + omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), + omap_readw(ARM_CKCTL)); + /* We want to be in syncronous scalable mode */ omap_writew(0x1000, ARM_SYSST); +#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER + /* Use values set by bootloader. Determine PLL rate and recalculate + * dependent clocks as if kernel had changed PLL or divisors. + */ + { + unsigned pll_ctl_val = omap_readw(DPLL_CTL); + + ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ + if (pll_ctl_val & 0x10) { + /* PLL enabled, apply multiplier and divisor */ + if (pll_ctl_val & 0xf80) + ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; + ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; + } else { + /* PLL disabled, apply bypass divisor */ + switch (pll_ctl_val & 0xc) { + case 0: + break; + case 0x4: + ck_dpll1.rate /= 2; + break; + default: + ck_dpll1.rate /= 4; + break; + } + } + } + propagate_rate(&ck_dpll1); +#else /* Find the highest supported frequency and enable it */ if (select_table_rate(&virtual_ck_mpu, ~0)) { printk(KERN_ERR "System frequencies not set. Check your config.\n"); @@ -1034,12 +1220,13 @@ int __init clk_init(void) omap_writew(0x1005, ARM_CKCTL); ck_dpll1.rate = 60000000; propagate_rate(&ck_dpll1); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): %ld/%ld/%ld\n", - ck_ref.rate, ck_dpll1.rate, arm_ck.rate); } - +#endif /* Cache rates for clocks connected to ck_ref (not dpll1) */ propagate_rate(&ck_ref); + printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld/%ld MHz\n", + ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, + ck_dpll1.rate, arm_ck.rate); #ifdef CONFIG_MACH_OMAP_PERSEUS2 /* Select slicer output as OMAP input clock */ @@ -1074,3 +1261,63 @@ int __init clk_init(void) return 0; } + + +#ifdef CONFIG_OMAP_RESET_CLOCKS + +static int __init omap_late_clk_reset(void) +{ + /* Turn off all unused clocks */ + struct clk *p; + __u32 regval32; + + omap_writew(0, SOFT_REQ_REG); + omap_writew(0, SOFT_REQ_REG2); + + list_for_each_entry(p, &clocks, node) { + if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) || + p->enable_reg == 0) + continue; + + /* Assume no DSP clocks have been activated by bootloader */ + if (p->flags & DSP_DOMAIN_CLOCK) + continue; + + /* Is the clock already disabled? */ + if (p->flags & ENABLE_REG_32BIT) { + if (p->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readl(p->enable_reg); + else + regval32 = omap_readl(p->enable_reg); + } else { + if (p->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readw(p->enable_reg); + else + regval32 = omap_readw(p->enable_reg); + } + + if ((regval32 & (1 << p->enable_bit)) == 0) + continue; + + /* FIXME: This clock seems to be necessary but no-one + * has asked for its activation. */ + if (p == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera + || p == &ck_dpll1out // FIX: SoSSI, SSR + || p == &arm_gpio_ck // FIX: GPIO code for 1510 + ) { + printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", + p->name); + continue; + } + + printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name); + __clk_disable(p); + printk(" done\n"); + } + + return 0; +} + +late_initcall(omap_late_clk_reset); + +#endif diff --git a/arch/arm/mach-omap/clock.h b/arch/arm/plat-omap/clock.h index 08c0ddde1835..a89e1e8c2519 100644 --- a/arch/arm/mach-omap/clock.h +++ b/arch/arm/plat-omap/clock.h @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/clock.h + * linux/arch/arm/plat-omap/clock.h * * Copyright (C) 2004 Nokia corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> @@ -52,6 +52,8 @@ struct mpu_rate { #define CLOCK_IN_OMAP16XX 64 #define CLOCK_IN_OMAP1510 128 #define CLOCK_IN_OMAP730 256 +#define DSP_DOMAIN_CLOCK 512 +#define VIRTUAL_IO_ADDRESS 1024 /* ARM_CKCTL bit shifts */ #define CKCTL_PERDIV_OFFSET 0 @@ -63,6 +65,8 @@ struct mpu_rate { /*#define ARM_TIMXO 12*/ #define EN_DSPCK 13 /*#define ARM_INTHCK_SEL 14*/ /* Divide-by-2 for mpu inth_ck */ +/* DSP_CKCTL bit shifts */ +#define CKCTL_DSPPERDIV_OFFSET 0 /* ARM_IDLECT1 bit shifts */ /*#define IDLWDT_ARM 0*/ @@ -96,6 +100,9 @@ struct mpu_rate { #define EN_TC1_CK 2 #define EN_TC2_CK 4 +/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */ +#define EN_DSPTIMCK 5 + /* Various register defines for clock controls scattered around OMAP chip */ #define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */ #define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */ @@ -103,7 +110,8 @@ struct mpu_rate { #define COM_ULPD_PLL_CLK_REQ 1 /* In COM_CLK_DIV_CTRL_SEL */ #define SWD_CLK_DIV_CTRL_SEL 0xfffe0874 #define COM_CLK_DIV_CTRL_SEL 0xfffe0878 - +#define SOFT_REQ_REG 0xfffe0834 +#define SOFT_REQ_REG2 0xfffe0880 int clk_register(struct clk *clk); void clk_unregister(struct clk *clk); diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c new file mode 100644 index 000000000000..ea967a8f6ce5 --- /dev/null +++ b/arch/arm/plat-omap/common.c @@ -0,0 +1,135 @@ +/* + * linux/arch/arm/plat-omap/common.c + * + * Code common to all OMAP machines. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/console.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_8250.h> +#include <linux/serial_reg.h> + +#include <asm/hardware.h> +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/mach/map.h> +#include <asm/hardware/clock.h> +#include <asm/io.h> +#include <asm/mach-types.h> + +#include <asm/arch/board.h> +#include <asm/arch/mux.h> +#include <asm/arch/fpga.h> + +#include "clock.h" + +#define NO_LENGTH_CHECK 0xffffffff + +extern int omap_bootloader_tag_len; +extern u8 omap_bootloader_tag[]; + +struct omap_board_config_kernel *omap_board_config; +int omap_board_config_size = 0; + +static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out) +{ + struct omap_board_config_kernel *kinfo = NULL; + int i; + +#ifdef CONFIG_OMAP_BOOT_TAG + struct omap_board_config_entry *info = NULL; + + if (omap_bootloader_tag_len > 4) + info = (struct omap_board_config_entry *) omap_bootloader_tag; + while (info != NULL) { + u8 *next; + + if (info->tag == tag) { + if (skip == 0) + break; + skip--; + } + + if ((info->len & 0x03) != 0) { + /* We bail out to avoid an alignment fault */ + printk(KERN_ERR "OMAP peripheral config: Length (%d) not word-aligned (tag %04x)\n", + info->len, info->tag); + return NULL; + } + next = (u8 *) info + sizeof(*info) + info->len; + if (next >= omap_bootloader_tag + omap_bootloader_tag_len) + info = NULL; + else + info = (struct omap_board_config_entry *) next; + } + if (info != NULL) { + /* Check the length as a lame attempt to check for + * binary inconsistancy. */ + if (len != NO_LENGTH_CHECK) { + /* Word-align len */ + if (len & 0x03) + len = (len + 3) & ~0x03; + if (info->len != len) { + printk(KERN_ERR "OMAP peripheral config: Length mismatch with tag %x (want %d, got %d)\n", + tag, len, info->len); + return NULL; + } + } + if (len_out != NULL) + *len_out = info->len; + return info->data; + } +#endif + /* Try to find the config from the board-specific structures + * in the kernel. */ + for (i = 0; i < omap_board_config_size; i++) { + if (omap_board_config[i].tag == tag) { + kinfo = &omap_board_config[i]; + break; + } + } + if (kinfo == NULL) + return NULL; + return kinfo->data; +} + +const void *__omap_get_config(u16 tag, size_t len, int nr) +{ + return get_config(tag, len, nr, NULL); +} +EXPORT_SYMBOL(__omap_get_config); + +const void *omap_get_var_config(u16 tag, size_t *len) +{ + return get_config(tag, NO_LENGTH_CHECK, 0, len); +} +EXPORT_SYMBOL(omap_get_var_config); + +static int __init omap_add_serial_console(void) +{ + const struct omap_serial_console_config *info; + + info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE, + struct omap_serial_console_config); + if (info != NULL && info->console_uart) { + static char speed[11], *opt = NULL; + + if (info->console_speed) { + snprintf(speed, sizeof(speed), "%u", info->console_speed); + opt = speed; + } + return add_preferred_console("ttyS", info->console_uart - 1, opt); + } + return 0; +} +console_initcall(omap_add_serial_console); diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c new file mode 100644 index 000000000000..409aac2c4b9d --- /dev/null +++ b/arch/arm/plat-omap/cpu-omap.c @@ -0,0 +1,128 @@ +/* + * linux/arch/arm/plat-omap/cpu-omap.c + * + * CPU frequency scaling for OMAP + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/err.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/io.h> +#include <asm/system.h> + +#include <asm/hardware/clock.h> + +/* TODO: Add support for SDRAM timing changes */ + +int omap_verify_speed(struct cpufreq_policy *policy) +{ + struct clk * mpu_clk; + + if (policy->cpu) + return -EINVAL; + + cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); + mpu_clk = clk_get(NULL, "mpu"); + if (IS_ERR(mpu_clk)) + return PTR_ERR(mpu_clk); + policy->min = clk_round_rate(mpu_clk, policy->min * 1000) / 1000; + policy->max = clk_round_rate(mpu_clk, policy->max * 1000) / 1000; + cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); + clk_put(mpu_clk); + + return 0; +} + +unsigned int omap_getspeed(unsigned int cpu) +{ + struct clk * mpu_clk; + unsigned long rate; + + if (cpu) + return 0; + + mpu_clk = clk_get(NULL, "mpu"); + if (IS_ERR(mpu_clk)) + return 0; + rate = clk_get_rate(mpu_clk) / 1000; + clk_put(mpu_clk); + + return rate; +} + +static int omap_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct clk * mpu_clk; + struct cpufreq_freqs freqs; + int ret = 0; + + mpu_clk = clk_get(NULL, "mpu"); + if (IS_ERR(mpu_clk)) + return PTR_ERR(mpu_clk); + + freqs.old = omap_getspeed(0); + freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; + freqs.cpu = 0; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + ret = clk_set_rate(mpu_clk, target_freq * 1000); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + clk_put(mpu_clk); + + return ret; +} + +static int __init omap_cpu_init(struct cpufreq_policy *policy) +{ + struct clk * mpu_clk; + + mpu_clk = clk_get(NULL, "mpu"); + if (IS_ERR(mpu_clk)) + return PTR_ERR(mpu_clk); + + if (policy->cpu != 0) + return -EINVAL; + policy->cur = policy->min = policy->max = omap_getspeed(0); + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000; + policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, 216000000) / 1000; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + clk_put(mpu_clk); + + return 0; +} + +static struct cpufreq_driver omap_driver = { + .flags = CPUFREQ_STICKY, + .verify = omap_verify_speed, + .target = omap_target, + .get = omap_getspeed, + .init = omap_cpu_init, + .name = "omap", +}; + +static int __init omap_cpufreq_init(void) +{ + return cpufreq_register_driver(&omap_driver); +} + +arch_initcall(omap_cpufreq_init); diff --git a/arch/arm/mach-omap/dma.c b/arch/arm/plat-omap/dma.c index 7a9ebe80d6f8..c0a5c2fa42bd 100644 --- a/arch/arm/mach-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/omap/dma.c + * linux/arch/arm/plat-omap/dma.c * * Copyright (C) 2003 Nokia Corporation * Author: Juha Yrjölä <juha.yrjola@nokia.com> @@ -794,10 +794,6 @@ static void set_b1_regs(void) w = omap_readw(OMAP1610_DMA_LCD_CTRL); /* Always set the source port as SDRAM for now*/ w &= ~(0x03 << 6); - if (lcd_dma.ext_ctrl) - w |= 1 << 8; - else - w &= ~(1 << 8); if (lcd_dma.callback != NULL) w |= 1 << 1; /* Block interrupt enable */ else @@ -889,9 +885,15 @@ void omap_enable_lcd_dma(void) */ if (enable_1510_mode || !lcd_dma.ext_ctrl) return; + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w |= 1 << 8; + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + w = omap_readw(OMAP1610_DMA_LCD_CCR); w |= 1 << 7; omap_writew(w, OMAP1610_DMA_LCD_CCR); + lcd_dma.active = 1; } @@ -922,10 +924,19 @@ void omap_setup_lcd_dma(void) void omap_stop_lcd_dma(void) { + u16 w; + lcd_dma.active = 0; - if (!enable_1510_mode && lcd_dma.ext_ctrl) - omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~(1 << 7), - OMAP1610_DMA_LCD_CCR); + if (enable_1510_mode || !lcd_dma.ext_ctrl) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + w &= ~(1 << 7); + omap_writew(w, OMAP1610_DMA_LCD_CCR); + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w &= ~(1 << 8); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); } /* @@ -972,6 +983,25 @@ dma_addr_t omap_get_dma_dst_pos(int lch) (OMAP_DMA_CDSA_U(lch) << 16)); } +int omap_dma_running(void) +{ + int lch; + + /* Check if LCD DMA is running */ + if (cpu_is_omap16xx()) + if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) + return 1; + + for (lch = 0; lch < dma_chan_count; lch++) { + u16 w; + + w = omap_readw(OMAP_DMA_CCR(lch)); + if (w & OMAP_DMA_CCR_EN) + return 1; + } + return 0; +} + static int __init omap_init_dma(void) { int ch, r; diff --git a/arch/arm/mach-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 9045dfd469ad..1c85b4e536c2 100644 --- a/arch/arm/mach-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/gpio.c + * linux/arch/arm/plat-omap/gpio.c * * Support functions for OMAP GPIO * diff --git a/arch/arm/mach-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 7c4ad7713091..43567d5edddb 100644 --- a/arch/arm/mach-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/omap/mcbsp.c + * linux/arch/arm/plat-omap/mcbsp.c * * Copyright (C) 2004 Nokia Corporation * Author: Samuel Ortiz <samuel.ortiz@nokia.com> @@ -66,6 +66,7 @@ struct omap_mcbsp { static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT]; static struct clk *mcbsp_dsp_ck = 0; static struct clk *mcbsp_api_ck = 0; +static struct clk *mcbsp_dspxor_ck = 0; static void omap_mcbsp_dump_reg(u8 id) @@ -175,7 +176,7 @@ static int omap_mcbsp_check(unsigned int id) return 0; } - if (cpu_is_omap1510() || cpu_is_omap1610() || cpu_is_omap1710()) { + if (cpu_is_omap1510() || cpu_is_omap16xx()) { if (id > OMAP_MAX_MCBSP_COUNT) { printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1); return -1; @@ -191,15 +192,12 @@ static int omap_mcbsp_check(unsigned int id) static void omap_mcbsp_dsp_request(void) { - if (cpu_is_omap1510() || cpu_is_omap1610() || cpu_is_omap1710()) { - omap_writew((omap_readw(ARM_RSTCT1) | (1 << 1) | (1 << 2)), - ARM_RSTCT1); - clk_enable(mcbsp_dsp_ck); - clk_enable(mcbsp_api_ck); + if (cpu_is_omap1510() || cpu_is_omap16xx()) { + clk_use(mcbsp_dsp_ck); + clk_use(mcbsp_api_ck); /* enable 12MHz clock to mcbsp 1 & 3 */ - __raw_writew(__raw_readw(DSP_IDLECT2) | (1 << EN_XORPCK), - DSP_IDLECT2); + clk_use(mcbsp_dspxor_ck); __raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1, DSP_RSTCT2); } @@ -207,10 +205,13 @@ static void omap_mcbsp_dsp_request(void) static void omap_mcbsp_dsp_free(void) { - /* Useless for now */ + if (cpu_is_omap1510() || cpu_is_omap16xx()) { + clk_unuse(mcbsp_dspxor_ck); + clk_unuse(mcbsp_dsp_ck); + clk_unuse(mcbsp_api_ck); + } } - int omap_mcbsp_request(unsigned int id) { int err; @@ -350,6 +351,73 @@ void omap_mcbsp_stop(unsigned int id) } +/* polled mcbsp i/o operations */ +int omap_mcbsp_pollwrite(unsigned int id, u16 buf) +{ + u32 base = mcbsp[id].io_base; + writew(buf, base + OMAP_MCBSP_REG_DXR1); + /* if frame sync error - clear the error */ + if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) { + /* clear error */ + writew(readw(base + OMAP_MCBSP_REG_SPCR2) & (~XSYNC_ERR), + base + OMAP_MCBSP_REG_SPCR2); + /* resend */ + return -1; + } else { + /* wait for transmit confirmation */ + int attemps = 0; + while (!(readw(base + OMAP_MCBSP_REG_SPCR2) & XRDY)) { + if (attemps++ > 1000) { + writew(readw(base + OMAP_MCBSP_REG_SPCR2) & + (~XRST), + base + OMAP_MCBSP_REG_SPCR2); + udelay(10); + writew(readw(base + OMAP_MCBSP_REG_SPCR2) | + (XRST), + base + OMAP_MCBSP_REG_SPCR2); + udelay(10); + printk(KERN_ERR + " Could not write to McBSP Register\n"); + return -2; + } + } + } + return 0; +} + +int omap_mcbsp_pollread(unsigned int id, u16 * buf) +{ + u32 base = mcbsp[id].io_base; + /* if frame sync error - clear the error */ + if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) { + /* clear error */ + writew(readw(base + OMAP_MCBSP_REG_SPCR1) & (~RSYNC_ERR), + base + OMAP_MCBSP_REG_SPCR1); + /* resend */ + return -1; + } else { + /* wait for recieve confirmation */ + int attemps = 0; + while (!(readw(base + OMAP_MCBSP_REG_SPCR1) & RRDY)) { + if (attemps++ > 1000) { + writew(readw(base + OMAP_MCBSP_REG_SPCR1) & + (~RRST), + base + OMAP_MCBSP_REG_SPCR1); + udelay(10); + writew(readw(base + OMAP_MCBSP_REG_SPCR1) | + (RRST), + base + OMAP_MCBSP_REG_SPCR1); + udelay(10); + printk(KERN_ERR + " Could not read from McBSP Register\n"); + return -2; + } + } + } + *buf = readw(base + OMAP_MCBSP_REG_DRR1); + return 0; +} + /* * IRQ based word transmission. */ @@ -625,10 +693,15 @@ static int __init omap_mcbsp_init(void) return PTR_ERR(mcbsp_dsp_ck); } mcbsp_api_ck = clk_get(0, "api_ck"); - if (IS_ERR(mcbsp_dsp_ck)) { + if (IS_ERR(mcbsp_api_ck)) { printk(KERN_ERR "mcbsp: could not acquire api_ck handle.\n"); return PTR_ERR(mcbsp_api_ck); } + mcbsp_dspxor_ck = clk_get(0, "dspxor_ck"); + if (IS_ERR(mcbsp_dspxor_ck)) { + printk(KERN_ERR "mcbsp: could not acquire dspxor_ck handle.\n"); + return PTR_ERR(mcbsp_dspxor_ck); + } #ifdef CONFIG_ARCH_OMAP730 if (cpu_is_omap730()) { @@ -643,7 +716,7 @@ static int __init omap_mcbsp_init(void) } #endif #if defined(CONFIG_ARCH_OMAP16XX) - if (cpu_is_omap1610() || cpu_is_omap1710()) { + if (cpu_is_omap16xx()) { mcbsp_info = mcbsp_1610; mcbsp_count = ARRAY_SIZE(mcbsp_1610); } diff --git a/arch/arm/mach-omap/mux.c b/arch/arm/plat-omap/mux.c index bcf3c6e5ecd0..ea7b955b9c81 100644 --- a/arch/arm/mach-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/mux.c + * linux/arch/arm/plat-omap/mux.c * * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h * @@ -53,19 +53,13 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) return -EINVAL; } - cfg = ®_cfg_table[reg_cfg]; - - /* - * We do a pretty long section here with lock on, but pin muxing - * should only happen on driver init for each driver, so it's not time - * critical. - */ - spin_lock_irqsave(&mux_spin_lock, flags); + cfg = (reg_cfg_set *)®_cfg_table[reg_cfg]; /* Check the mux register in question */ if (cfg->mux_reg) { unsigned tmp1, tmp2; + spin_lock_irqsave(&mux_spin_lock, flags); reg_orig = omap_readl(cfg->mux_reg); /* The mux registers always seem to be 3 bits long */ @@ -80,11 +74,13 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) warn = 1; omap_writel(reg, cfg->mux_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); } /* Check for pull up or pull down selection on 1610 */ if (!cpu_is_omap1510()) { if (cfg->pu_pd_reg && cfg->pull_val) { + spin_lock_irqsave(&mux_spin_lock, flags); pu_pd_orig = omap_readl(cfg->pu_pd_reg); mask = 1 << cfg->pull_bit; @@ -100,11 +96,13 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) pu_pd = pu_pd_orig & ~mask; } omap_writel(pu_pd, cfg->pu_pd_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); } } /* Check for an associated pull down register */ if (cfg->pull_reg) { + spin_lock_irqsave(&mux_spin_lock, flags); pull_orig = omap_readl(cfg->pull_reg); mask = 1 << cfg->pull_bit; @@ -121,6 +119,7 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) } omap_writel(pull, cfg->pull_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); } if (warn) { @@ -149,8 +148,6 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) } #endif - spin_unlock_irqrestore(&mux_spin_lock, flags); - #ifdef CONFIG_OMAP_MUX_ERRORS return warn ? -ETXTBSY : 0; #else diff --git a/arch/arm/mach-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c index c9ced134a75d..2ede2ee8cae4 100644 --- a/arch/arm/mach-omap/ocpi.c +++ b/arch/arm/plat-omap/ocpi.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/ocpi.c + * linux/arch/arm/plat-omap/ocpi.c * * Minimal OCP bus support for omap16xx * @@ -25,7 +25,6 @@ #include <linux/config.h> #include <linux/module.h> -#include <linux/version.h> #include <linux/types.h> #include <linux/errno.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-omap/pm.c b/arch/arm/plat-omap/pm.c index 00fac155df2a..e6536b16c385 100644 --- a/arch/arm/mach-omap/pm.c +++ b/arch/arm/plat-omap/pm.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/pm.c + * linux/arch/arm/plat-omap/pm.c * * OMAP Power Management Routines * @@ -41,7 +41,9 @@ #include <linux/pm.h> #include <asm/io.h> +#include <asm/mach/time.h> #include <asm/mach-types.h> + #include <asm/arch/omap16xx.h> #include <asm/arch/pm.h> #include <asm/arch/mux.h> @@ -80,13 +82,13 @@ void omap_pm_idle(void) return; } mask32 = omap_readl(ARM_SYSST); - local_fiq_enable(); - local_irq_enable(); -#if defined(CONFIG_OMAP_32K_TIMER) && defined(CONFIG_NO_IDLE_HZ) - /* Override timer to use VST for the next cycle */ - omap_32k_timer_next_vst_interrupt(); -#endif + /* + * Since an interrupt may set up a timer, we don't want to + * reprogram the hardware timer with interrupts enabled. + * Re-enable interrupts only after returning from idle. + */ + timer_dyn_reprogram(); if ((mask32 & DSP_IDLE) == 0) { __asm__ volatile ("mcr p15, 0, r0, c7, c0, 4"); @@ -102,6 +104,8 @@ void omap_pm_idle(void) func_ptr(); } + local_fiq_enable(); + local_irq_enable(); } /* diff --git a/arch/arm/mach-omap/sleep.S b/arch/arm/plat-omap/sleep.S index 4d426d105828..279490ce772b 100644 --- a/arch/arm/mach-omap/sleep.S +++ b/arch/arm/plat-omap/sleep.S @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/sleep.S + * linux/arch/arm/plat-omap/sleep.S * * Low-level OMAP1510/1610 sleep/wakeUp support * diff --git a/arch/arm/mach-omap/usb.c b/arch/arm/plat-omap/usb.c index 6e805d451d0e..25bc4a8dd763 100644 --- a/arch/arm/mach-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-omap/usb.c -- platform level USB initialization + * arch/arm/plat-omap/usb.c -- platform level USB initialization * * Copyright (C) 2004 Texas Instruments, Inc. * @@ -41,7 +41,6 @@ /* These routines should handle the standard chip-specific modes * for usb0/1/2 ports, covering basic mux and transceiver setup. - * Call omap_usb_init() once, from INIT_MACHINE(). * * Some board-*.c files will need to set up additional mux options, * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup. @@ -288,8 +287,8 @@ static void usb_release(struct device *dev) static struct resource udc_resources[] = { /* order is significant! */ { /* registers */ - .start = IO_ADDRESS(UDC_BASE), - .end = IO_ADDRESS(UDC_BASE + 0xff), + .start = UDC_BASE, + .end = UDC_BASE + 0xff, .flags = IORESOURCE_MEM, }, { /* general IRQ */ .start = IH2_BASE + 20, @@ -327,7 +326,7 @@ static u64 ohci_dmamask = ~(u32)0; static struct resource ohci_resources[] = { { .start = OMAP_OHCI_BASE, - .end = OMAP_OHCI_BASE + 4096, + .end = OMAP_OHCI_BASE + 4096 - 1, .flags = IORESOURCE_MEM, }, { @@ -355,8 +354,8 @@ static struct platform_device ohci_device = { static struct resource otg_resources[] = { /* order is significant! */ { - .start = IO_ADDRESS(OTG_BASE), - .end = IO_ADDRESS(OTG_BASE + 0xff), + .start = OTG_BASE, + .end = OTG_BASE + 0xff, .flags = IORESOURCE_MEM, }, { .start = IH2_BASE + 8, diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 30c1dfbb052f..6d3a79e5fef8 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -6,7 +6,7 @@ # To add an entry into this database, please see Documentation/arm/README, # or contact rmk@arm.linux.org.uk # -# Last update: Thu Mar 24 14:34:50 2005 +# Last update: Thu Jun 23 20:19:33 2005 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -243,7 +243,7 @@ yoho ARCH_YOHO YOHO 231 jasper ARCH_JASPER JASPER 232 dsc25 ARCH_DSC25 DSC25 233 omap_innovator MACH_OMAP_INNOVATOR OMAP_INNOVATOR 234 -ramses ARCH_RAMSES RAMSES 235 +mnci ARCH_RAMSES RAMSES 235 s28x ARCH_S28X S28X 236 mport3 ARCH_MPORT3 MPORT3 237 pxa_eagle250 ARCH_PXA_EAGLE250 PXA_EAGLE250 238 @@ -323,7 +323,7 @@ nimbra29x ARCH_NIMBRA29X NIMBRA29X 311 nimbra210 ARCH_NIMBRA210 NIMBRA210 312 hhp_d95xx ARCH_HHP_D95XX HHP_D95XX 313 labarm ARCH_LABARM LABARM 314 -m825xx ARCH_M825XX M825XX 315 +comcerto ARCH_M825XX M825XX 315 m7100 SA1100_M7100 M7100 316 nipc2 ARCH_NIPC2 NIPC2 317 fu7202 ARCH_FU7202 FU7202 318 @@ -724,3 +724,66 @@ lpc22xx MACH_LPC22XX LPC22XX 715 omap_comet3 MACH_COMET3 COMET3 716 omap_comet4 MACH_COMET4 COMET4 717 csb625 MACH_CSB625 CSB625 718 +fortunet2 MACH_FORTUNET2 FORTUNET2 719 +s5h2200 MACH_S5H2200 S5H2200 720 +optorm920 MACH_OPTORM920 OPTORM920 721 +adsbitsyxb MACH_ADSBITSYXB ADSBITSYXB 722 +adssphere MACH_ADSSPHERE ADSSPHERE 723 +adsportal MACH_ADSPORTAL ADSPORTAL 724 +ln2410sbc MACH_LN2410SBC LN2410SBC 725 +cb3rufc MACH_CB3RUFC CB3RUFC 726 +mp2usb MACH_MP2USB MP2USB 727 +ntnp425c MACH_NTNP425C NTNP425C 728 +colibri MACH_COLIBRI COLIBRI 729 +pcm7220 MACH_PCM7220 PCM7220 730 +gateway7001 MACH_GATEWAY7001 GATEWAY7001 731 +pcm027 MACH_PCM027 PCM027 732 +cmpxa MACH_CMPXA CMPXA 733 +anubis MACH_ANUBIS ANUBIS 734 +ite8152 MACH_ITE8152 ITE8152 735 +lpc3xxx MACH_LPC3XXX LPC3XXX 736 +puppeteer MACH_PUPPETEER PUPPETEER 737 +vt001 MACH_MACH_VADATECH MACH_VADATECH 738 +e570 MACH_E570 E570 739 +x50 MACH_X50 X50 740 +recon MACH_RECON RECON 741 +xboardgp8 MACH_XBOARDGP8 XBOARDGP8 742 +fpic2 MACH_FPIC2 FPIC2 743 +akita MACH_AKITA AKITA 744 +a81 MACH_A81 A81 745 +svm_sc25x MACH_SVM_SC25X SVM_SC25X 746 +vt020 MACH_VADATECH020 VADATECH020 747 +tli MACH_TLI TLI 748 +edb9315lc MACH_EDB9315LC EDB9315LC 749 +passec MACH_PASSEC PASSEC 750 +ds_tiger MACH_DS_TIGER DS_TIGER 751 +e310 MACH_E310 E310 752 +e330 MACH_E330 E330 753 +rt3000 MACH_RT3000 RT3000 754 +nokia770 MACH_NOKIA770 NOKIA770 755 +pnx0106 MACH_PNX0106 PNX0106 756 +hx21xx MACH_HX21XX HX21XX 757 +faraday MACH_FARADAY FARADAY 758 +sbc9312 MACH_SBC9312 SBC9312 759 +batman MACH_BATMAN BATMAN 760 +jpd201 MACH_JPD201 JPD201 761 +mipsa MACH_MIPSA MIPSA 762 +kacom MACH_KACOM KACOM 763 +swarcocpu MACH_SWARCOCPU SWARCOCPU 764 +swarcodsl MACH_SWARCODSL SWARCODSL 765 +blueangel MACH_BLUEANGEL BLUEANGEL 766 +hairygrama MACH_HAIRYGRAMA HAIRYGRAMA 767 +banff MACH_BANFF BANFF 768 +carmeva MACH_CARMEVA CARMEVA 769 +sam255 MACH_SAM255 SAM255 770 +ppm10 MACH_PPM10 PPM10 771 +edb9315a MACH_EDB9315A EDB9315A 772 +sunset MACH_SUNSET SUNSET 773 +stargate2 MACH_STARGATE2 STARGATE2 774 +intelmote2 MACH_INTELMOTE2 INTELMOTE2 775 +trizeps4 MACH_TRIZEPS4 TRIZEPS4 776 +mainstone2 MACH_MAINSTONE2 MAINSTONE2 777 +ez_ixp42x MACH_EZ_IXP42X EZ_IXP42X 778 +tapwave_zodiac MACH_TAPWAVE_ZODIAC TAPWAVE_ZODIAC 779 +universalmeter MACH_UNIVERSALMETER UNIVERSALMETER 780 +hicoarm9 MACH_HICOARM9 HICOARM9 781 diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h index 55a02bc994a3..4b97950984e9 100644 --- a/arch/arm/vfp/vfp.h +++ b/arch/arm/vfp/vfp.h @@ -117,7 +117,13 @@ static inline u64 vfp_estimate_div128to64(u64 nh, u64 nl, u64 m) if (nh >= m) return ~0ULL; mh = m >> 32; - z = (mh << 32 <= nh) ? 0xffffffff00000000ULL : (nh / mh) << 32; + if (mh << 32 <= nh) { + z = 0xffffffff00000000ULL; + } else { + z = nh; + do_div(z, mh); + z <<= 32; + } mul64to128(&termh, &terml, m, z); sub128(&remh, &reml, nh, nl, termh, terml); ml = m << 32; @@ -126,7 +132,12 @@ static inline u64 vfp_estimate_div128to64(u64 nh, u64 nl, u64 m) add128(&remh, &reml, remh, reml, mh, ml); } remh = (remh << 32) | (reml >> 32); - z |= (mh << 32 <= remh) ? 0xffffffff : remh / mh; + if (mh << 32 <= remh) { + z |= 0xffffffff; + } else { + do_div(remh, mh); + z |= remh; + } return z; } diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c index fa3053e84db5..9b367a65cb4d 100644 --- a/arch/arm/vfp/vfpdouble.c +++ b/arch/arm/vfp/vfpdouble.c @@ -32,6 +32,8 @@ */ #include <linux/kernel.h> #include <linux/bitops.h> + +#include <asm/div64.h> #include <asm/ptrace.h> #include <asm/vfp.h> @@ -768,6 +770,9 @@ vfp_double_add(struct vfp_double *vdd, struct vfp_double *vdn, if ((s64)m_sig < 0) { vdd->sign = vfp_sign_negate(vdd->sign); m_sig = -m_sig; + } else if (m_sig == 0) { + vdd->sign = (fpscr & FPSCR_RMODE_MASK) == + FPSCR_ROUND_MINUSINF ? 0x8000 : 0; } } else { m_sig += vdn->significand; diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 3aeedd2afc70..22f3da4e0829 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -89,7 +89,7 @@ void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs) current->thread.error_code = 0; current->thread.trap_no = 6; - force_sig_info(SIGFPE, &info, current); + send_sig_info(SIGFPE, &info, current); } static void vfp_panic(char *reason) diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c index 6849fe35cb2e..14dd696ddeb1 100644 --- a/arch/arm/vfp/vfpsingle.c +++ b/arch/arm/vfp/vfpsingle.c @@ -32,6 +32,8 @@ */ #include <linux/kernel.h> #include <linux/bitops.h> + +#include <asm/div64.h> #include <asm/ptrace.h> #include <asm/vfp.h> @@ -303,7 +305,11 @@ u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand) if (z <= a) return (s32)a >> 1; } - return (u32)(((u64)a << 31) / z) + (z >> 1); + { + u64 v = (u64)a << 31; + do_div(v, z); + return v + (z >> 1); + } } static u32 vfp_single_fsqrt(int sd, int unused, s32 m, u32 fpscr) @@ -1107,7 +1113,11 @@ static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr) vsn.significand >>= 1; vsd.exponent++; } - vsd.significand = ((u64)vsn.significand << 32) / vsm.significand; + { + u64 significand = (u64)vsn.significand << 32; + do_div(significand, vsm.significand); + vsd.significand = significand; + } if ((vsd.significand & 0x3f) == 0) vsd.significand |= ((u64)vsm.significand * vsd.significand != (u64)vsn.significand << 32); diff --git a/arch/arm26/Kconfig b/arch/arm26/Kconfig index 6caed90661fc..1f0373267306 100644 --- a/arch/arm26/Kconfig +++ b/arch/arm26/Kconfig @@ -179,8 +179,12 @@ config CMDLINE time by entering them here. As a minimum, you should specify the memory size and the root device (e.g., mem=64M root=/dev/nfs). +source "mm/Kconfig" + endmenu +source "net/Kconfig" + source "drivers/base/Kconfig" source "drivers/parport/Kconfig" @@ -191,7 +195,7 @@ source "drivers/block/Kconfig" source "drivers/md/Kconfig" -source "net/Kconfig" +source "drivers/net/Kconfig" source "drivers/ide/Kconfig" diff --git a/arch/arm26/boot/install.sh b/arch/arm26/boot/install.sh index c628328dd9ec..8a8399b26cf7 100644 --- a/arch/arm26/boot/install.sh +++ b/arch/arm26/boot/install.sh @@ -23,8 +23,8 @@ # User may have a custom install script -if [ -x /sbin/installkernel ]; then - exec /sbin/installkernel "$@" +if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then + exec /sbin/${CROSS_COMPILE}installkernel "$@" fi if [ "$2" = "zImage" ]; then diff --git a/arch/arm26/kernel/process.c b/arch/arm26/kernel/process.c index 46aea6ac194d..9eb9964d32a7 100644 --- a/arch/arm26/kernel/process.c +++ b/arch/arm26/kernel/process.c @@ -103,9 +103,6 @@ void machine_power_off(void) { } -EXPORT_SYMBOL(machine_halt); -EXPORT_SYMBOL(machine_power_off); - void machine_restart(char * __unused) { /* @@ -136,8 +133,6 @@ void machine_restart(char * __unused) while (1); } -EXPORT_SYMBOL(machine_restart); - void show_regs(struct pt_regs * regs) { unsigned long flags; diff --git a/arch/arm26/mm/fault.c b/arch/arm26/mm/fault.c index dacca8bb7744..bd6f2db608b7 100644 --- a/arch/arm26/mm/fault.c +++ b/arch/arm26/mm/fault.c @@ -176,12 +176,12 @@ survive: * Handle the "normal" cases first - successful and sigbus */ switch (fault) { - case 2: + case VM_FAULT_MAJOR: tsk->maj_flt++; return fault; - case 1: + case VM_FAULT_MINOR: tsk->min_flt++; - case 0: + case VM_FAULT_SIGBUS: return fault; } @@ -226,14 +226,11 @@ int do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) /* * Handle the "normal" case first */ - if (fault > 0) + switch (fault) { + case VM_FAULT_MINOR: + case VM_FAULT_MAJOR: return 0; - - /* - * We had some memory, but were unable to - * successfully fix up this page fault. - */ - if (fault == 0){ + case VM_FAULT_SIGBUS: goto do_sigbus; } diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 4332ca348d51..e5979d68e352 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -74,6 +74,8 @@ config PREEMPT Say Y here if you are building a kernel for a desktop, embedded or real-time system. Say N if you are unsure. +source mm/Kconfig + endmenu menu "Hardware setup" @@ -120,6 +122,8 @@ source arch/cris/arch-v10/Kconfig endmenu +source "net/Kconfig" + # bring in ETRAX built-in drivers menu "Drivers for built-in interfaces" source arch/cris/arch-v10/drivers/Kconfig @@ -147,7 +151,7 @@ source "drivers/ieee1394/Kconfig" source "drivers/message/i2o/Kconfig" -source "net/Kconfig" +source "drivers/net/Kconfig" source "drivers/isdn/Kconfig" diff --git a/arch/cris/Kconfig.debug b/arch/cris/Kconfig.debug index f42918bf22a9..cd72324935c4 100644 --- a/arch/cris/Kconfig.debug +++ b/arch/cris/Kconfig.debug @@ -38,4 +38,9 @@ config FRAME_POINTER If you don't debug the kernel, you can say N, but we may not be able to solve problems without frame pointers. +config DEBUG_NMI_OOPS + bool "NMI causes oops printout" + help + If the system locks up without any debug information you can say Y + here to make it possible to dump an OOPS with an external NMI. endmenu diff --git a/arch/cris/Makefile b/arch/cris/Makefile index 9d28fa8563cc..90ca8730b120 100644 --- a/arch/cris/Makefile +++ b/arch/cris/Makefile @@ -1,4 +1,4 @@ -# $Id: Makefile,v 1.23 2004/10/19 13:07:34 starvik Exp $ +# $Id: Makefile,v 1.28 2005/03/17 10:44:37 larsv Exp $ # cris/Makefile # # This file is included by the global makefile so that you can add your own @@ -15,6 +15,7 @@ arch-y := v10 arch-$(CONFIG_ETRAX_ARCH_V10) := v10 +arch-$(CONFIG_ETRAX_ARCH_V32) := v32 # No config avaiable for make clean etc ifneq ($(arch-y),) @@ -46,6 +47,21 @@ core-y += arch/$(ARCH)/$(SARCH)/kernel/ arch/$(ARCH)/$(SARCH)/mm/ drivers-y += arch/$(ARCH)/$(SARCH)/drivers/ libs-y += arch/$(ARCH)/$(SARCH)/lib/ $(LIBGCC) +# cris source path +SRC_ARCH = $(srctree)/arch/$(ARCH) +# cris object files path +OBJ_ARCH = $(objtree)/arch/$(ARCH) + +target_boot_arch_dir = $(OBJ_ARCH)/$(SARCH)/boot +target_boot_dir = $(OBJ_ARCH)/boot +src_boot_dir = $(SRC_ARCH)/boot +target_compressed_dir = $(OBJ_ARCH)/boot/compressed +src_compressed_dir = $(SRC_ARCH)/boot/compressed +target_rescue_dir = $(OBJ_ARCH)/boot/rescue +src_rescue_dir = $(SRC_ARCH)/boot/rescue + +export target_boot_arch_dir target_boot_dir src_boot_dir target_compressed_dir src_compressed_dir target_rescue_dir src_rescue_dir + vmlinux.bin: vmlinux $(OBJCOPY) $(OBJCOPYFLAGS) vmlinux vmlinux.bin @@ -65,44 +81,52 @@ cramfs: clinux: vmlinux.bin decompress.bin rescue.bin -decompress.bin: FORCE - @make -C arch/$(ARCH)/boot/compressed decompress.bin +decompress.bin: $(target_boot_dir) + @$(MAKE) -f $(src_compressed_dir)/Makefile $(target_compressed_dir)/decompress.bin -rescue.bin: FORCE - @make -C arch/$(ARCH)/boot/rescue rescue.bin +$(target_rescue_dir)/rescue.bin: $(target_boot_dir) + @$(MAKE) -f $(src_rescue_dir)/Makefile $(target_rescue_dir)/rescue.bin -zImage: vmlinux.bin rescue.bin +zImage: $(target_boot_dir) vmlinux.bin $(target_rescue_dir)/rescue.bin ## zImage - Compressed kernel (gzip) - @make -C arch/$(ARCH)/boot/ zImage + @$(MAKE) -f $(src_boot_dir)/Makefile zImage + +$(target_boot_dir): $(target_boot_arch_dir) + ln -sfn $< $@ + +$(target_boot_arch_dir): + mkdir -p $@ compressed: zImage archmrproper: archclean: - $(Q)$(MAKE) $(clean)=arch/$(ARCH)/boot + @if [ -d arch/$(ARCH)/boot ]; then \ + $(MAKE) $(clean)=arch/$(ARCH)/boot ; \ + fi rm -f timage vmlinux.bin decompress.bin rescue.bin cramfs.img rm -rf $(LD_SCRIPT).tmp -prepare: arch/$(ARCH)/.links include/asm-$(ARCH)/.arch \ +prepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch \ include/asm-$(ARCH)/$(SARCH)/offset.h # Create some links to make all tools happy -arch/$(ARCH)/.links: - @rm -rf arch/$(ARCH)/drivers - @ln -sfn $(SARCH)/drivers arch/$(ARCH)/drivers - @rm -rf arch/$(ARCH)/boot - @ln -sfn $(SARCH)/boot arch/$(ARCH)/boot - @rm -rf arch/$(ARCH)/lib - @ln -sfn $(SARCH)/lib arch/$(ARCH)/lib - @ln -sfn $(SARCH) arch/$(ARCH)/arch - @ln -sfn ../$(SARCH)/vmlinux.lds.S arch/$(ARCH)/kernel/vmlinux.lds.S +$(SRC_ARCH)/.links: + @rm -rf $(SRC_ARCH)/drivers + @ln -sfn $(SRC_ARCH)/$(SARCH)/drivers $(SRC_ARCH)/drivers + @rm -rf $(SRC_ARCH)/boot + @ln -sfn $(SRC_ARCH)/$(SARCH)/boot $(SRC_ARCH)/boot + @rm -rf $(SRC_ARCH)/lib + @ln -sfn $(SRC_ARCH)/$(SARCH)/lib $(SRC_ARCH)/lib + @ln -sfn $(SRC_ARCH)/$(SARCH) $(SRC_ARCH)/arch + @ln -sfn $(SRC_ARCH)/$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S @touch $@ # Create link to sub arch includes -include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h) - @echo ' Making asm-$(ARCH)/arch -> asm-$(ARCH)/$(SARCH) symlink' +$(srctree)/include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h) + @echo ' Making $(srctree)/include/asm-$(ARCH)/arch -> $(srctree)/include/asm-$(ARCH)/$(SARCH) symlink' @rm -f include/asm-$(ARCH)/arch - @ln -sf $(SARCH) include/asm-$(ARCH)/arch + @ln -sf $(srctree)/include/asm-$(ARCH)/$(SARCH) $(srctree)/include/asm-$(ARCH)/arch @touch $@ arch/$(ARCH)/$(SARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig index 2ca64cc40c63..44eb1b9accb3 100644 --- a/arch/cris/arch-v10/Kconfig +++ b/arch/cris/arch-v10/Kconfig @@ -260,6 +260,37 @@ config ETRAX_DEBUG_PORT_NULL endchoice choice + prompt "Kernel GDB port" + depends on ETRAX_KGDB + default ETRAX_KGDB_PORT0 + help + Choose a serial port for kernel debugging. NOTE: This port should + not be enabled under Drivers for built-in interfaces (as it has its + own initialization code) and should not be the same as the debug port. + +config ETRAX_KGDB_PORT0 + bool "Serial-0" + help + Use serial port 0 for kernel debugging. + +config ETRAX_KGDB_PORT1 + bool "Serial-1" + help + Use serial port 1 for kernel debugging. + +config ETRAX_KGDB_PORT2 + bool "Serial-2" + help + Use serial port 2 for kernel debugging. + +config ETRAX_KGDB_PORT3 + bool "Serial-3" + help + Use serial port 3 for kernel debugging. + +endchoice + +choice prompt "Product rescue-port" depends on ETRAX_ARCH_V10 default ETRAX_RESCUE_SER0 diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/arch-v10/boot/Makefile index fe6650368e6a..e5b105851108 100644 --- a/arch/cris/arch-v10/boot/Makefile +++ b/arch/cris/arch-v10/boot/Makefile @@ -1,12 +1,13 @@ # # arch/cris/boot/Makefile # +target = $(target_boot_dir) +src = $(src_boot_dir) zImage: compressed/vmlinuz -compressed/vmlinuz: $(TOPDIR)/vmlinux - @$(MAKE) -C compressed vmlinuz +compressed/vmlinuz: + @$(MAKE) -f $(src)/compressed/Makefile $(target_compressed_dir)/vmlinuz clean: - rm -f zImage tools/build compressed/vmlinux.out - @$(MAKE) -C compressed clean + @$(MAKE) -f $(src)/compressed/Makefile clean diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/arch-v10/boot/compressed/Makefile index 5f71c2c819e6..6584a44820f4 100644 --- a/arch/cris/arch-v10/boot/compressed/Makefile +++ b/arch/cris/arch-v10/boot/compressed/Makefile @@ -1,40 +1,45 @@ # -# linux/arch/etrax100/boot/compressed/Makefile -# -# create a compressed vmlinux image from the original vmlinux files and romfs +# create a compressed vmlinuz image from the binary vmlinux.bin file # +target = $(target_compressed_dir) +src = $(src_compressed_dir) -CC = gcc-cris -melf -I $(TOPDIR)/include +CC = gcc-cris -melf $(LINUXINCLUDE) CFLAGS = -O2 LD = ld-cris OBJCOPY = objcopy-cris OBJCOPYFLAGS = -O binary --remove-section=.bss -OBJECTS = head.o misc.o +OBJECTS = $(target)/head.o $(target)/misc.o # files to compress -SYSTEM = $(TOPDIR)/vmlinux.bin +SYSTEM = $(objtree)/vmlinux.bin -all: vmlinuz +all: $(target_compressed_dir)/vmlinuz -decompress.bin: $(OBJECTS) - $(LD) -T decompress.ld -o decompress.o $(OBJECTS) - $(OBJCOPY) $(OBJCOPYFLAGS) decompress.o decompress.bin -# save it for mkprod in the topdir. - cp decompress.bin $(TOPDIR) +$(target)/decompress.bin: $(OBJECTS) + $(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS) + $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin +# Create vmlinuz image in top-level build directory +$(target_compressed_dir)/vmlinuz: $(target) piggy.img $(target)/decompress.bin + @echo " COMPR vmlinux.bin --> vmlinuz" + @cat $(target)/decompress.bin piggy.img > $(target_compressed_dir)/vmlinuz + @rm -f piggy.img -vmlinuz: piggy.img decompress.bin - cat decompress.bin piggy.img > vmlinuz - rm -f piggy.img +$(target)/head.o: $(src)/head.S + $(CC) -D__ASSEMBLY__ -traditional -c $< -o $@ -head.o: head.S - $(CC) -D__ASSEMBLY__ -traditional -c head.S -o head.o +$(target)/misc.o: $(src)/misc.c + $(CC) -D__KERNEL__ -c $< -o $@ # gzip the kernel image piggy.img: $(SYSTEM) - cat $(SYSTEM) | gzip -f -9 > piggy.img + @cat $(SYSTEM) | gzip -f -9 > piggy.img + +$(target): + mkdir -p $(target) clean: - rm -f piggy.img vmlinuz vmlinuz.o + rm -f piggy.img $(objtree)/vmlinuz diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/arch-v10/boot/compressed/head.S index 4cbdd4b1d9d6..e73f44c998d9 100644 --- a/arch/cris/arch-v10/boot/compressed/head.S +++ b/arch/cris/arch-v10/boot/compressed/head.S @@ -13,7 +13,8 @@ #include <asm/arch/sv_addr_ag.h> #define RAM_INIT_MAGIC 0x56902387 - +#define COMMAND_LINE_MAGIC 0x87109563 + ;; Exported symbols .globl _input_data @@ -88,6 +89,12 @@ basse: move.d pc, r5 cmp.d r2, r1 bcs 1b nop + + ;; Save command line magic and address. + move.d _cmd_line_magic, $r12 + move.d $r10, [$r12] + move.d _cmd_line_addr, $r12 + move.d $r11, [$r12] ;; Do the decompression and save compressed size in _inptr @@ -98,7 +105,13 @@ basse: move.d pc, r5 move.d [_input_data], r9 ; flash address of compressed kernel add.d [_inptr], r9 ; size of compressed kernel - + + ;; Restore command line magic and address. + move.d _cmd_line_magic, $r10 + move.d [$r10], $r10 + move.d _cmd_line_addr, $r11 + move.d [$r11], $r11 + ;; Enter the decompressed kernel move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized jump 0x40004000 ; kernel is linked to this address @@ -107,5 +120,8 @@ basse: move.d pc, r5 _input_data: .dword 0 ; used by the decompressor - +_cmd_line_magic: + .dword 0 +_cmd_line_addr: + .dword 0 #include "../../lib/hw_settings.S" diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/arch-v10/boot/rescue/Makefile index e9f2ba2ad02c..8be9b3130312 100644 --- a/arch/cris/arch-v10/boot/rescue/Makefile +++ b/arch/cris/arch-v10/boot/rescue/Makefile @@ -1,52 +1,53 @@ # # Makefile for rescue code # -ifndef TOPDIR -TOPDIR = ../../../.. -endif -CC = gcc-cris -mlinux -I $(TOPDIR)/include +target = $(target_rescue_dir) +src = $(src_rescue_dir) + +CC = gcc-cris -mlinux $(LINUXINCLUDE) CFLAGS = -O2 LD = gcc-cris -mlinux -nostdlib OBJCOPY = objcopy-cris OBJCOPYFLAGS = -O binary --remove-section=.bss -all: rescue.bin testrescue.bin kimagerescue.bin - -rescue: rescue.bin - # do nothing +all: $(target)/rescue.bin $(target)/testrescue.bin $(target)/kimagerescue.bin -rescue.bin: head.o - $(LD) -T rescue.ld -o rescue.o head.o - $(OBJCOPY) $(OBJCOPYFLAGS) rescue.o rescue.bin - cp rescue.bin $(TOPDIR) +$(target)/rescue.bin: $(target) $(target)/head.o + $(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o + $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin +# Place a copy in top-level build directory + cp -p $(target)/rescue.bin $(objtree) -testrescue.bin: testrescue.o - $(OBJCOPY) $(OBJCOPYFLAGS) testrescue.o tr.bin +$(target)/testrescue.bin: $(target) $(target)/testrescue.o + $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/testrescue.o tr.bin # Pad it to 784 bytes dd if=/dev/zero of=tmp2423 bs=1 count=784 cat tr.bin tmp2423 >testrescue_tmp.bin - dd if=testrescue_tmp.bin of=testrescue.bin bs=1 count=784 + dd if=testrescue_tmp.bin of=$(target)/testrescue.bin bs=1 count=784 rm tr.bin tmp2423 testrescue_tmp.bin -kimagerescue.bin: kimagerescue.o - $(OBJCOPY) $(OBJCOPYFLAGS) kimagerescue.o ktr.bin +$(target)/kimagerescue.bin: $(target) $(target)/kimagerescue.o + $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/kimagerescue.o ktr.bin # Pad it to 784 bytes, that's what the rescue loader expects dd if=/dev/zero of=tmp2423 bs=1 count=784 cat ktr.bin tmp2423 >kimagerescue_tmp.bin - dd if=kimagerescue_tmp.bin of=kimagerescue.bin bs=1 count=784 + dd if=kimagerescue_tmp.bin of=$(target)/kimagerescue.bin bs=1 count=784 rm ktr.bin tmp2423 kimagerescue_tmp.bin -head.o: head.S +$(target): + mkdir -p $(target) + +$(target)/head.o: $(src)/head.S $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o -testrescue.o: testrescue.S +$(target)/testrescue.o: $(src)/testrescue.S $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o -kimagerescue.o: kimagerescue.S +$(target)/kimagerescue.o: $(src)/kimagerescue.S $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o clean: - rm -f *.o *.bin + rm -f $(target)/*.o $(target)/*.bin fastdep: diff --git a/arch/cris/arch-v10/boot/rescue/head.S b/arch/cris/arch-v10/boot/rescue/head.S index 8689ea972c46..addb2194de0f 100644 --- a/arch/cris/arch-v10/boot/rescue/head.S +++ b/arch/cris/arch-v10/boot/rescue/head.S @@ -1,4 +1,4 @@ -/* $Id: head.S,v 1.6 2003/04/09 08:12:43 pkj Exp $ +/* $Id: head.S,v 1.7 2005/03/07 12:11:06 starvik Exp $ * * Rescue code, made to reside at the beginning of the * flash-memory. when it starts, it checks a partition @@ -121,12 +121,13 @@ ;; 0x80000000 if loaded in flash (as it should be) ;; since etrax actually starts at address 2 when booting from flash, we ;; put a nop (2 bytes) here first so we dont accidentally skip the di - + nop di jump in_cache ; enter cached area instead -in_cache: +in_cache: + ;; first put a jump test to give a possibility of upgrading the rescue code ;; without erasing/reflashing the sector. we put a longword of -1 here and if @@ -325,9 +326,29 @@ flash_ok: ;; result will be in r0 checksum: moveq 0, $r0 -1: addu.b [$r1+], $r0 - subq 1, $r2 - bne 1b + moveq CONFIG_ETRAX_FLASH1_SIZE, $r6 + + ;; If the first physical flash memory is exceeded wrap to the second one. + btstq 26, $r1 ; Are we addressing first flash? + bpl 1f + nop + clear.d $r6 + +1: test.d $r6 ; 0 = no wrapping + beq 2f + nop + lslq 20, $r6 ; Convert MB to bytes + sub.d $r1, $r6 + +2: addu.b [$r1+], $r0 + subq 1, $r6 ; Flash memory left + beq 3f + subq 1, $r2 ; Length left + bne 2b nop ret nop + +3: move.d MEM_CSE1_START, $r1 ; wrap to second flash + ba 2b + nop diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 748374f25b87..8b50e8402954 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -1,17 +1,11 @@ config ETRAX_ETHERNET bool "Ethernet support" depends on ETRAX_ARCH_V10 + select NET_ETHERNET help This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet controller. -# this is just so that the user does not have to go into the -# normal ethernet driver section just to enable ethernetworking -config NET_ETHERNET - bool - depends on ETRAX_ETHERNET - default y - choice prompt "Network LED behavior" depends on ETRAX_ETHERNET @@ -20,26 +14,26 @@ choice config ETRAX_NETWORK_LED_ON_WHEN_LINK bool "LED_on_when_link" help - Selecting LED_on_when_link will light the LED when there is a - connection and will flash off when there is activity. + Selecting LED_on_when_link will light the LED when there is a + connection and will flash off when there is activity. - Selecting LED_on_when_activity will light the LED only when + Selecting LED_on_when_activity will light the LED only when there is activity. - This setting will also affect the behaviour of other activity LEDs - e.g. Bluetooth. + This setting will also affect the behaviour of other activity LEDs + e.g. Bluetooth. config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY bool "LED_on_when_activity" help - Selecting LED_on_when_link will light the LED when there is a - connection and will flash off when there is activity. + Selecting LED_on_when_link will light the LED when there is a + connection and will flash off when there is activity. - Selecting LED_on_when_activity will light the LED only when + Selecting LED_on_when_activity will light the LED only when there is activity. - This setting will also affect the behaviour of other activity LEDs - e.g. Bluetooth. + This setting will also affect the behaviour of other activity LEDs + e.g. Bluetooth. endchoice @@ -91,11 +85,11 @@ choice depends on ETRAX_SERIAL_PORT0 default ETRAX_SERIAL_PORT0_DMA6_OUT -config CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT - bool "No DMA out" +config ETRAX_SERIAL_PORT0_NO_DMA_OUT + bool "No DMA out" -config CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT - bool "DMA 6" +config ETRAX_SERIAL_PORT0_DMA6_OUT + bool "DMA 6" endchoice @@ -104,11 +98,11 @@ choice depends on ETRAX_SERIAL_PORT0 default ETRAX_SERIAL_PORT0_DMA7_IN -config CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN - bool "No DMA in" +config ETRAX_SERIAL_PORT0_NO_DMA_IN + bool "No DMA in" -config CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN - bool "DMA 7" +config ETRAX_SERIAL_PORT0_DMA7_IN + bool "DMA 7" endchoice @@ -205,11 +199,11 @@ choice depends on ETRAX_SERIAL_PORT1 default ETRAX_SERIAL_PORT1_DMA8_OUT -config CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_OUT - bool "No DMA out" +config ETRAX_SERIAL_PORT1_NO_DMA_OUT + bool "No DMA out" -config CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT - bool "DMA 8" +config ETRAX_SERIAL_PORT1_DMA8_OUT + bool "DMA 8" endchoice @@ -218,11 +212,11 @@ choice depends on ETRAX_SERIAL_PORT1 default ETRAX_SERIAL_PORT1_DMA9_IN -config CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_IN - bool "No DMA in" +config ETRAX_SERIAL_PORT1_NO_DMA_IN + bool "No DMA in" -config CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN - bool "DMA 9" +config ETRAX_SERIAL_PORT1_DMA9_IN + bool "DMA 9" endchoice @@ -308,7 +302,7 @@ config ETRAX_SER1_CD_ON_PB_BIT Specify the pin of the PB port to carry the CD signal for serial port 1. -comment "Make sure you dont have the same PB bits more than once!" +comment "Make sure you do not have the same PB bits more than once!" depends on ETRAX_SERIAL && ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && ETRAX_SER1_DTR_RI_DSR_CD_ON_PB config ETRAX_SERIAL_PORT2 @@ -322,11 +316,11 @@ choice depends on ETRAX_SERIAL_PORT2 default ETRAX_SERIAL_PORT2_DMA2_OUT -config CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT - bool "No DMA out" +config ETRAX_SERIAL_PORT2_NO_DMA_OUT + bool "No DMA out" -config CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT - bool "DMA 2" +config ETRAX_SERIAL_PORT2_DMA2_OUT + bool "DMA 2" endchoice @@ -335,11 +329,11 @@ choice depends on ETRAX_SERIAL_PORT2 default ETRAX_SERIAL_PORT2_DMA3_IN -config CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN - bool "No DMA in" +config ETRAX_SERIAL_PORT2_NO_DMA_IN + bool "No DMA in" -config CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN - bool "DMA 3" +config ETRAX_SERIAL_PORT2_DMA3_IN + bool "DMA 3" endchoice @@ -436,11 +430,11 @@ choice depends on ETRAX_SERIAL_PORT3 default ETRAX_SERIAL_PORT3_DMA4_OUT -config CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT - bool "No DMA out" +config ETRAX_SERIAL_PORT3_NO_DMA_OUT + bool "No DMA out" -config CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT - bool "DMA 4" +config ETRAX_SERIAL_PORT3_DMA4_OUT + bool "DMA 4" endchoice @@ -449,11 +443,11 @@ choice depends on ETRAX_SERIAL_PORT3 default ETRAX_SERIAL_PORT3_DMA5_IN -config CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN - bool "No DMA in" +config ETRAX_SERIAL_PORT3_NO_DMA_IN + bool "No DMA in" -config CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN - bool "DMA 5" +config ETRAX_SERIAL_PORT3_DMA5_IN + bool "DMA 5" endchoice @@ -554,7 +548,6 @@ config ETRAX_IDE select BLK_DEV_IDEDISK select BLK_DEV_IDECD select BLK_DEV_IDEDMA - select DMA_NONPCI help Enable this to get support for ATA/IDE. You can't use paralell ports or SCSI ports @@ -579,7 +572,7 @@ config ETRAX_IDE_PB7_RESET IDE reset on pin 7 on port B config ETRAX_IDE_G27_RESET - bool "Port_G_Bit_27" + bool "Port_G_Bit_27" help IDE reset on pin 27 on port G @@ -588,30 +581,36 @@ endchoice config ETRAX_USB_HOST bool "USB host" + select USB help This option enables the host functionality of the ETRAX 100LX built-in USB controller. In host mode the controller is designed for CTRL and BULK traffic only, INTR traffic may work as well however (depending on the requirements of timeliness). -config USB - tristate - depends on ETRAX_USB_HOST - default y - config ETRAX_USB_HOST_PORT1 - bool " USB port 1 enabled" - depends on ETRAX_USB_HOST - default n + bool "USB port 1 enabled" + depends on ETRAX_USB_HOST + default n config ETRAX_USB_HOST_PORT2 - bool " USB port 2 enabled" - depends on ETRAX_USB_HOST - default n + bool "USB port 2 enabled" + depends on ETRAX_USB_HOST + default n config ETRAX_AXISFLASHMAP bool "Axis flash-map support" depends on ETRAX_ARCH_V10 + select MTD + select MTD_CFI + select MTD_CFI_AMDSTD + select MTD_OBSOLETE_CHIPS + select MTD_AMDSTD + select MTD_CHAR + select MTD_BLOCK + select MTD_PARTITIONS + select MTD_CONCAT + select MTD_COMPLEX_MAPPINGS help This option enables MTD mapping of flash devices. Needed to use flash memories. If unsure, say Y. @@ -627,119 +626,6 @@ config ETRAX_PTABLE_SECTOR for changing this is when the flash block size is bigger than 64kB (e.g. when using two parallel 16 bit flashes). -# here we define the CONFIG_'s necessary to enable MTD support -# for the flash -config MTD - tristate - depends on ETRAX_AXISFLASHMAP - default y - help - Memory Technology Devices are flash, RAM and similar chips, often - used for solid state file systems on embedded devices. This option - will provide the generic support for MTD drivers to register - themselves with the kernel and for potential users of MTD devices - to enumerate the devices which are present and obtain a handle on - them. It will also allow you to select individual drivers for - particular hardware and users of MTD devices. If unsure, say N. - -config MTD_CFI - tristate - depends on ETRAX_AXISFLASHMAP - default y - help - The Common Flash Interface specification was developed by Intel, - AMD and other flash manufactures that provides a universal method - for probing the capabilities of flash devices. If you wish to - support any device that is CFI-compliant, you need to enable this - option. Visit <http://www.amd.com/products/nvd/overview/cfi.html> - for more information on CFI. - -config MTD_CFI_AMDSTD - tristate - depends on ETRAX_AXISFLASHMAP - default y - help - The Common Flash Interface defines a number of different command - sets which a CFI-compliant chip may claim to implement. This code - provides support for one of those command sets, used on chips - chips including the AMD Am29LV320. - -config MTD_OBSOLETE_CHIPS - bool - depends on ETRAX_AXISFLASHMAP - default y - help - This option does not enable any code directly, but will allow you to - select some other chip drivers which are now considered obsolete, - because the generic CONFIG_JEDEC_PROBE code above should now detect - the chips which are supported by these drivers, and allow the generic - CFI-compatible drivers to drive the chips. Say 'N' here unless you have - already tried the CONFIG_JEDEC_PROBE method and reported its failure - to the MTD mailing list at <linux-mtd@lists.infradead.org> - -config MTD_AMDSTD - tristate - depends on ETRAX_AXISFLASHMAP - default y - help - This option enables support for flash chips using AMD-compatible - commands, including some which are not CFI-compatible and hence - cannot be used with the CONFIG_MTD_CFI_AMDSTD option. - - It also works on AMD compatible chips that do conform to CFI. - -config MTD_CHAR - tristate - depends on ETRAX_AXISFLASHMAP - default y - help - This provides a character device for each MTD device present in - the system, allowing the user to read and write directly to the - memory chips, and also use ioctl() to obtain information about - the device, or to erase parts of it. - -config MTD_BLOCK - tristate - depends on ETRAX_AXISFLASHMAP - default y - ---help--- - Although most flash chips have an erase size too large to be useful - as block devices, it is possible to use MTD devices which are based - on RAM chips in this manner. This block device is a user of MTD - devices performing that function. - - At the moment, it is also required for the Journalling Flash File - System(s) to obtain a handle on the MTD device when it's mounted - (although JFFS and JFFS2 don't actually use any of the functionality - of the mtdblock device). - - Later, it may be extended to perform read/erase/modify/write cycles - on flash chips to emulate a smaller block size. Needless to say, - this is very unsafe, but could be useful for file systems which are - almost never written to. - - You do not need this option for use with the DiskOnChip devices. For - those, enable NFTL support (CONFIG_NFTL) instead. - -config MTD_PARTITIONS - tristate - depends on ETRAX_AXISFLASHMAP - default y - help - If you have a device which needs to divide its flash chip(s) up - into multiple 'partitions', each of which appears to the user as - a separate MTD device, you require this option to be enabled. If - unsure, say 'Y'. - - Note, however, that you don't need this option for the DiskOnChip - devices. Partitioning on NFTL 'devices' is a different - that's the - 'normal' form of partitioning used on a block device. - -config MTD_CONCAT - tristate - depends on ETRAX_AXISFLASHMAP - default y - config ETRAX_I2C bool "I2C support" depends on ETRAX_ARCH_V10 @@ -752,7 +638,7 @@ config ETRAX_I2C val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg); # this is true for most products since PB-I2C seems to be somewhat -# flawed.. +# flawed.. config ETRAX_I2C_USES_PB_NOT_PB_I2C bool "I2C uses PB not PB-I2C" depends on ETRAX_I2C @@ -886,7 +772,7 @@ config ETRAX_RTC bool "Real Time Clock support" depends on ETRAX_ARCH_V10 help - Enables drivers for the Real-Time Clock battery-backed chips on + Enables drivers for the Real-Time Clock battery-backed chips on some products. The kernel reads the time when booting, and the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc @@ -903,13 +789,13 @@ config ETRAX_DS1302 bool "DS1302" help Enables the driver for the DS1302 Real-Time Clock battery-backed - chip on some products. + chip on some products. config ETRAX_PCF8563 bool "PCF8563" help Enables the driver for the PCF8563 Real-Time Clock battery-backed - chip on some products. + chip on some products. endchoice @@ -954,10 +840,8 @@ config ETRAX_DS1302_TRICKLE_CHARGE help This controls the initial value of the trickle charge register. 0 = disabled (use this if you are unsure or have a non rechargable battery) - Otherwise the following values can be OR:ed together to control the + Otherwise the following values can be OR:ed together to control the charge current: 1 = 2kohm, 2 = 4kohm, 3 = 4kohm 4 = 1 diode, 8 = 2 diodes Allowed values are (increasing current): 0, 11, 10, 9, 7, 6, 5 - - diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c index fb7d4855ea62..11ab3836aac6 100644 --- a/arch/cris/arch-v10/drivers/axisflashmap.c +++ b/arch/cris/arch-v10/drivers/axisflashmap.c @@ -11,6 +11,9 @@ * partition split defined below. * * $Log: axisflashmap.c,v $ + * Revision 1.11 2004/11/15 10:27:14 starvik + * Corrected typo (Thanks to Milton Miller <miltonm@bga.com>). + * * Revision 1.10 2004/08/16 12:37:22 starvik * Merge of Linux 2.6.8 * @@ -161,7 +164,7 @@ #elif CONFIG_ETRAX_FLASH_BUSWIDTH==2 #define flash_data __u16 #elif CONFIG_ETRAX_FLASH_BUSWIDTH==4 -#define flash_data __u16 +#define flash_data __u32 #endif /* From head.S */ diff --git a/arch/cris/arch-v10/drivers/ds1302.c b/arch/cris/arch-v10/drivers/ds1302.c index fba530fcfaeb..10795f67f687 100644 --- a/arch/cris/arch-v10/drivers/ds1302.c +++ b/arch/cris/arch-v10/drivers/ds1302.c @@ -7,6 +7,15 @@ *! Functions exported: ds1302_readreg, ds1302_writereg, ds1302_init *! *! $Log: ds1302.c,v $ +*! Revision 1.18 2005/01/24 09:11:26 mikaelam +*! Minor changes to get DS1302 RTC chip driver to work +*! +*! Revision 1.17 2005/01/05 06:11:22 starvik +*! No need to do local_irq_disable after local_irq_save. +*! +*! Revision 1.16 2004/12/13 12:21:52 starvik +*! Added I/O and DMA allocators from Linux 2.4 +*! *! Revision 1.14 2004/08/24 06:48:43 starvik *! Whitespace cleanup *! @@ -124,9 +133,9 @@ *! *! --------------------------------------------------------------------------- *! -*! (C) Copyright 1999, 2000, 2001 Axis Communications AB, LUND, SWEDEN +*! (C) Copyright 1999, 2000, 2001, 2002, 2003, 2004 Axis Communications AB, LUND, SWEDEN *! -*! $Id: ds1302.c,v 1.14 2004/08/24 06:48:43 starvik Exp $ +*! $Id: ds1302.c,v 1.18 2005/01/24 09:11:26 mikaelam Exp $ *! *!***************************************************************************/ @@ -145,6 +154,7 @@ #include <asm/arch/svinto.h> #include <asm/io.h> #include <asm/rtc.h> +#include <asm/arch/io_interface_mux.h> #define RTC_MAJOR_NR 121 /* local major, change later */ @@ -320,7 +330,6 @@ get_rtc_time(struct rtc_time *rtc_tm) unsigned long flags; local_irq_save(flags); - local_irq_disable(); rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS); rtc_tm->tm_min = CMOS_READ(RTC_MINUTES); @@ -358,7 +367,7 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - unsigned long flags; + unsigned long flags; switch(cmd) { case RTC_RD_TIME: /* read the time/date from RTC */ @@ -382,7 +391,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, return -EPERM; if (copy_from_user(&rtc_tm, (struct rtc_time*)arg, sizeof(struct rtc_time))) - return -EFAULT; + return -EFAULT; yrs = rtc_tm.tm_year + 1900; mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */ @@ -419,7 +428,6 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, BIN_TO_BCD(yrs); local_irq_save(flags); - local_irq_disable(); CMOS_WRITE(yrs, RTC_YEAR); CMOS_WRITE(mon, RTC_MONTH); CMOS_WRITE(day, RTC_DAY_OF_MONTH); @@ -438,7 +446,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, case RTC_SET_CHARGE: /* set the RTC TRICKLE CHARGE register */ { - int tcs_val; + int tcs_val; if (!capable(CAP_SYS_TIME)) return -EPERM; @@ -492,8 +500,8 @@ print_rtc_status(void) /* The various file operations we support. */ static struct file_operations rtc_fops = { - .owner = THIS_MODULE, - .ioctl = rtc_ioctl, + .owner = THIS_MODULE, + .ioctl = rtc_ioctl, }; /* Probe for the chip by writing something to its RAM and try reading it back. */ @@ -532,7 +540,7 @@ ds1302_probe(void) "PB", #endif CONFIG_ETRAX_DS1302_RSTBIT); - print_rtc_status(); + print_rtc_status(); retval = 1; } else { stop(); @@ -548,7 +556,9 @@ ds1302_probe(void) int __init ds1302_init(void) { +#ifdef CONFIG_ETRAX_I2C i2c_init(); +#endif if (!ds1302_probe()) { #ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT @@ -558,25 +568,42 @@ ds1302_init(void) * * Make sure that R_GEN_CONFIG is setup correct. */ - genconfig_shadow = ((genconfig_shadow & - ~IO_MASK(R_GEN_CONFIG, ata)) | - (IO_STATE(R_GEN_CONFIG, ata, select))); - *R_GEN_CONFIG = genconfig_shadow; + /* Allocating the ATA interface will grab almost all + * pins in I/O groups a, b, c and d. A consequence of + * allocating the ATA interface is that the fixed + * interfaces shared RAM, parallel port 0, parallel + * port 1, parallel port W, SCSI-8 port 0, SCSI-8 port + * 1, SCSI-W, serial port 2, serial port 3, + * synchronous serial port 3 and USB port 2 and almost + * all GPIO pins on port g cannot be used. + */ + if (cris_request_io_interface(if_ata, "ds1302/ATA")) { + printk(KERN_WARNING "ds1302: Failed to get IO interface\n"); + return -1; + } + #elif CONFIG_ETRAX_DS1302_RSTBIT == 0 - - /* Set the direction of this bit to out. */ - genconfig_shadow = ((genconfig_shadow & - ~IO_MASK(R_GEN_CONFIG, g0dir)) | - (IO_STATE(R_GEN_CONFIG, g0dir, out))); - *R_GEN_CONFIG = genconfig_shadow; + if (cris_io_interface_allocate_pins(if_gpio_grp_a, + 'g', + CONFIG_ETRAX_DS1302_RSTBIT, + CONFIG_ETRAX_DS1302_RSTBIT)) { + printk(KERN_WARNING "ds1302: Failed to get IO interface\n"); + return -1; + } + + /* Set the direction of this bit to out. */ + genconfig_shadow = ((genconfig_shadow & + ~IO_MASK(R_GEN_CONFIG, g0dir)) | + (IO_STATE(R_GEN_CONFIG, g0dir, out))); + *R_GEN_CONFIG = genconfig_shadow; #endif if (!ds1302_probe()) { printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name); - return -1; + return -1; } #else printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name); - return -1; + return -1; #endif } /* Initialise trickle charger */ diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c index 316ca15d6802..512f16dec060 100644 --- a/arch/cris/arch-v10/drivers/eeprom.c +++ b/arch/cris/arch-v10/drivers/eeprom.c @@ -20,6 +20,12 @@ *! in the spin-lock. *! *! $Log: eeprom.c,v $ +*! Revision 1.12 2005/06/19 17:06:46 starvik +*! Merge of Linux 2.6.12. +*! +*! Revision 1.11 2005/01/26 07:14:46 starvik +*! Applied diff from kernel janitors (Nish Aravamudan). +*! *! Revision 1.10 2003/09/11 07:29:48 starvik *! Merge of Linux 2.6.0-test5 *! @@ -94,6 +100,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/interrupt.h> +#include <linux/wait.h> #include <asm/uaccess.h> #include "i2c.h" @@ -526,15 +533,10 @@ static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t return -EFAULT; } - while(eeprom.busy) - { - interruptible_sleep_on(&eeprom.wait_q); + wait_event_interruptible(eeprom.wait_q, !eeprom.busy); + if (signal_pending(current)) + return -EINTR; - /* bail out if we get interrupted */ - if (signal_pending(current)) - return -EINTR; - - } eeprom.busy++; page = (unsigned char) (p >> 8); @@ -604,13 +606,10 @@ static ssize_t eeprom_write(struct file * file, const char * buf, size_t count, return -EFAULT; } - while(eeprom.busy) - { - interruptible_sleep_on(&eeprom.wait_q); - /* bail out if we get interrupted */ - if (signal_pending(current)) - return -EINTR; - } + wait_event_interruptible(eeprom.wait_q, !eeprom.busy); + /* bail out if we get interrupted */ + if (signal_pending(current)) + return -EINTR; eeprom.busy++; for(i = 0; (i < EEPROM_RETRIES) && (restart > 0); i++) { diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c index c095de82a0da..09963fe299a7 100644 --- a/arch/cris/arch-v10/drivers/gpio.c +++ b/arch/cris/arch-v10/drivers/gpio.c @@ -1,4 +1,4 @@ -/* $Id: gpio.c,v 1.12 2004/08/24 07:19:59 starvik Exp $ +/* $Id: gpio.c,v 1.17 2005/06/19 17:06:46 starvik Exp $ * * Etrax general port I/O device * @@ -9,6 +9,18 @@ * Johan Adolfsson (read/set directions, write, port G) * * $Log: gpio.c,v $ + * Revision 1.17 2005/06/19 17:06:46 starvik + * Merge of Linux 2.6.12. + * + * Revision 1.16 2005/03/07 13:02:29 starvik + * Protect driver global states with spinlock + * + * Revision 1.15 2005/01/05 06:08:55 starvik + * No need to do local_irq_disable after local_irq_save. + * + * Revision 1.14 2004/12/13 12:21:52 starvik + * Added I/O and DMA allocators from Linux 2.4 + * * Revision 1.12 2004/08/24 07:19:59 starvik * Whitespace cleanup * @@ -142,6 +154,7 @@ #include <asm/io.h> #include <asm/system.h> #include <asm/irq.h> +#include <asm/arch/io_interface_mux.h> #define GPIO_MAJOR 120 /* experimental MAJOR number */ @@ -194,6 +207,8 @@ static struct gpio_private *alarmlist = 0; static int gpio_some_alarms = 0; /* Set if someone uses alarm */ static unsigned long gpio_pa_irq_enabled_mask = 0; +static DEFINE_SPINLOCK(gpio_lock); /* Protect directions etc */ + /* Port A and B use 8 bit access, but Port G is 32 bit */ #define NUM_PORTS (GPIO_MINOR_B+1) @@ -241,6 +256,9 @@ static volatile unsigned char *dir_shadow[NUM_PORTS] = { &port_pb_dir_shadow }; +/* All bits in port g that can change dir. */ +static const unsigned long int changeable_dir_g_mask = 0x01FFFF01; + /* Port G is 32 bit, handle it special, some bits are both inputs and outputs at the same time, only some of the bits can change direction and some of them in groups of 8 bit. */ @@ -260,6 +278,7 @@ gpio_poll(struct file *file, unsigned int mask = 0; struct gpio_private *priv = (struct gpio_private *)file->private_data; unsigned long data; + spin_lock(&gpio_lock); poll_wait(file, &priv->alarm_wq, wait); if (priv->minor == GPIO_MINOR_A) { unsigned long flags; @@ -270,10 +289,10 @@ gpio_poll(struct file *file, */ tmp = ~data & priv->highalarm & 0xFF; tmp = (tmp << R_IRQ_MASK1_SET__pa0__BITNR); - save_flags(flags); cli(); + local_irq_save(flags); gpio_pa_irq_enabled_mask |= tmp; *R_IRQ_MASK1_SET = tmp; - restore_flags(flags); + local_irq_restore(flags); } else if (priv->minor == GPIO_MINOR_B) data = *R_PORT_PB_DATA; @@ -286,8 +305,11 @@ gpio_poll(struct file *file, (~data & priv->lowalarm)) { mask = POLLIN|POLLRDNORM; } + + spin_unlock(&gpio_lock); DP(printk("gpio_poll ready: mask 0x%08X\n", mask)); + return mask; } @@ -296,6 +318,7 @@ int etrax_gpio_wake_up_check(void) struct gpio_private *priv = alarmlist; unsigned long data = 0; int ret = 0; + spin_lock(&gpio_lock); while (priv) { if (USE_PORTS(priv)) { data = *priv->port; @@ -310,6 +333,7 @@ int etrax_gpio_wake_up_check(void) } priv = priv->next; } + spin_unlock(&gpio_lock); return ret; } @@ -327,6 +351,7 @@ static irqreturn_t gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs) { unsigned long tmp; + spin_lock(&gpio_lock); /* Find what PA interrupts are active */ tmp = (*R_IRQ_READ1); @@ -337,6 +362,8 @@ gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs) *R_IRQ_MASK1_CLR = tmp; gpio_pa_irq_enabled_mask &= ~tmp; + spin_unlock(&gpio_lock); + if (gpio_some_alarms) { return IRQ_RETVAL(etrax_gpio_wake_up_check()); } @@ -350,6 +377,9 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count, struct gpio_private *priv = (struct gpio_private *)file->private_data; unsigned char data, clk_mask, data_mask, write_msb; unsigned long flags; + + spin_lock(&gpio_lock); + ssize_t retval = count; if (priv->minor !=GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) { return -EFAULT; @@ -372,7 +402,7 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count, data = *buf++; if (priv->write_msb) { for (i = 7; i >= 0;i--) { - local_irq_save(flags); local_irq_disable(); + local_irq_save(flags); *priv->port = *priv->shadow &= ~clk_mask; if (data & 1<<i) *priv->port = *priv->shadow |= data_mask; @@ -384,7 +414,7 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count, } } else { for (i = 0; i <= 7;i++) { - local_irq_save(flags); local_irq_disable(); + local_irq_save(flags); *priv->port = *priv->shadow &= ~clk_mask; if (data & 1<<i) *priv->port = *priv->shadow |= data_mask; @@ -396,6 +426,7 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count, } } } + spin_unlock(&gpio_lock); return retval; } @@ -452,9 +483,14 @@ gpio_open(struct inode *inode, struct file *filp) static int gpio_release(struct inode *inode, struct file *filp) { - struct gpio_private *p = alarmlist; - struct gpio_private *todel = (struct gpio_private *)filp->private_data; - + struct gpio_private *p; + struct gpio_private *todel; + + spin_lock(&gpio_lock); + + p = alarmlist; + todel = (struct gpio_private *)filp->private_data; + /* unlink from alarmlist and free the private structure */ if (p == todel) { @@ -476,7 +512,7 @@ gpio_release(struct inode *inode, struct file *filp) p = p->next; } gpio_some_alarms = 0; - + spin_unlock(&gpio_lock); return 0; } @@ -491,14 +527,14 @@ unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg) */ unsigned long flags; if (USE_PORTS(priv)) { - local_irq_save(flags); local_irq_disable(); + local_irq_save(flags); *priv->dir = *priv->dir_shadow &= ~((unsigned char)arg & priv->changeable_dir); local_irq_restore(flags); return ~(*priv->dir_shadow) & 0xFF; /* Only 8 bits */ } else if (priv->minor == GPIO_MINOR_G) { /* We must fiddle with R_GEN_CONFIG to change dir */ - save_flags(flags); cli(); + local_irq_save(flags); if (((arg & dir_g_in_bits) != arg) && (arg & changeable_dir_g)) { arg &= changeable_dir_g; @@ -533,7 +569,7 @@ unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg) /* Must be a >120 ns delay before writing this again */ } - restore_flags(flags); + local_irq_restore(flags); return dir_g_in_bits; } return 0; @@ -543,14 +579,14 @@ unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg) { unsigned long flags; if (USE_PORTS(priv)) { - local_irq_save(flags); local_irq_disable(); + local_irq_save(flags); *priv->dir = *priv->dir_shadow |= ((unsigned char)arg & priv->changeable_dir); local_irq_restore(flags); return *priv->dir_shadow; } else if (priv->minor == GPIO_MINOR_G) { /* We must fiddle with R_GEN_CONFIG to change dir */ - save_flags(flags); cli(); + local_irq_save(flags); if (((arg & dir_g_out_bits) != arg) && (arg & changeable_dir_g)) { /* Set bits in genconfig to set to output */ @@ -583,7 +619,7 @@ unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg) *R_GEN_CONFIG = genconfig_shadow; /* Must be a >120 ns delay before writing this again */ } - restore_flags(flags); + local_irq_restore(flags); return dir_g_out_bits & 0x7FFFFFFF; } return 0; @@ -598,22 +634,26 @@ gpio_ioctl(struct inode *inode, struct file *file, { unsigned long flags; unsigned long val; + int ret = 0; + struct gpio_private *priv = (struct gpio_private *)file->private_data; if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) { return -EINVAL; } + spin_lock(&gpio_lock); + switch (_IOC_NR(cmd)) { case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ // read the port if (USE_PORTS(priv)) { - return *priv->port; + ret = *priv->port; } else if (priv->minor == GPIO_MINOR_G) { - return (*R_PORT_G_DATA) & 0x7FFFFFFF; + ret = (*R_PORT_G_DATA) & 0x7FFFFFFF; } break; case IO_SETBITS: - local_irq_save(flags); local_irq_disable(); + local_irq_save(flags); // set changeable bits with a 1 in arg if (USE_PORTS(priv)) { *priv->port = *priv->shadow |= @@ -624,7 +664,7 @@ gpio_ioctl(struct inode *inode, struct file *file, local_irq_restore(flags); break; case IO_CLRBITS: - local_irq_save(flags); local_irq_disable(); + local_irq_save(flags); // clear changeable bits with a 1 in arg if (USE_PORTS(priv)) { *priv->port = *priv->shadow &= @@ -666,33 +706,34 @@ gpio_ioctl(struct inode *inode, struct file *file, case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ /* Read direction 0=input 1=output */ if (USE_PORTS(priv)) { - return *priv->dir_shadow; + ret = *priv->dir_shadow; } else if (priv->minor == GPIO_MINOR_G) { /* Note: Some bits are both in and out, * Those that are dual is set here as well. */ - return (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF; + ret = (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF; } + break; case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */ /* Set direction 0=unchanged 1=input, * return mask with 1=input */ - return setget_input(priv, arg) & 0x7FFFFFFF; + ret = setget_input(priv, arg) & 0x7FFFFFFF; break; case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */ /* Set direction 0=unchanged 1=output, * return mask with 1=output */ - return setget_output(priv, arg) & 0x7FFFFFFF; - + ret = setget_output(priv, arg) & 0x7FFFFFFF; + break; case IO_SHUTDOWN: SOFT_SHUTDOWN(); break; case IO_GET_PWR_BT: #if defined (CONFIG_ETRAX_SOFT_SHUTDOWN) - return (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT)); + ret = (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT)); #else - return 0; + ret = 0; #endif break; case IO_CFG_WRITE_MODE: @@ -709,7 +750,7 @@ gpio_ioctl(struct inode *inode, struct file *file, { priv->clk_mask = 0; priv->data_mask = 0; - return -EPERM; + ret = -EPERM; } break; case IO_READ_INBITS: @@ -720,8 +761,7 @@ gpio_ioctl(struct inode *inode, struct file *file, val = *R_PORT_G_DATA; } if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) - return -EFAULT; - return 0; + ret = -EFAULT; break; case IO_READ_OUTBITS: /* *arg is result of reading the output shadow */ @@ -731,36 +771,43 @@ gpio_ioctl(struct inode *inode, struct file *file, val = port_g_data_shadow; } if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) - return -EFAULT; + ret = -EFAULT; break; case IO_SETGET_INPUT: /* bits set in *arg is set to input, * *arg updated with current input pins. */ if (copy_from_user(&val, (unsigned long*)arg, sizeof(val))) - return -EFAULT; + { + ret = -EFAULT; + break; + } val = setget_input(priv, val); if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) - return -EFAULT; + ret = -EFAULT; break; case IO_SETGET_OUTPUT: /* bits set in *arg is set to output, * *arg updated with current output pins. */ if (copy_from_user(&val, (unsigned long*)arg, sizeof(val))) - return -EFAULT; + { + ret = -EFAULT; + break; + } val = setget_output(priv, val); if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) - return -EFAULT; + ret = -EFAULT; break; default: if (priv->minor == GPIO_MINOR_LEDS) - return gpio_leds_ioctl(cmd, arg); + ret = gpio_leds_ioctl(cmd, arg); else - return -EINVAL; + ret = -EINVAL; } /* switch */ - - return 0; + + spin_unlock(&gpio_lock); + return ret; } static int @@ -802,60 +849,20 @@ struct file_operations gpio_fops = { }; -static void __init gpio_init_port_g(void) +void ioif_watcher(const unsigned int gpio_in_available, + const unsigned int gpio_out_available, + const unsigned char pa_available, + const unsigned char pb_available) { -#define GROUPA (0x0000FF3F) -#define GROUPB (1<<6 | 1<<7) -#define GROUPC (1<<30 | 1<<31) -#define GROUPD (0x3FFF0000) -#define GROUPD_LOW (0x00FF0000) - unsigned long used_in_bits = 0; - unsigned long used_out_bits = 0; - if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi0, select)){ - used_in_bits |= GROUPA | GROUPB | 0 | 0; - used_out_bits |= GROUPA | GROUPB | 0 | 0; - } - if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ata, select)) { - used_in_bits |= GROUPA | GROUPB | GROUPC | (GROUPD & ~(1<<25|1<<26)); - used_out_bits |= GROUPA | GROUPB | GROUPC | GROUPD; - } + unsigned long int flags; + D(printk("gpio.c: ioif_watcher called\n")); + D(printk("gpio.c: G in: 0x%08x G out: 0x%08x PA: 0x%02x PB: 0x%02x\n", + gpio_in_available, gpio_out_available, pa_available, pb_available)); - if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, par0, select)) { - used_in_bits |= (GROUPA & ~(1<<0)) | 0 | 0 | 0; - used_out_bits |= (GROUPA & ~(1<<0)) | 0 | 0 | 0; - } - if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ser2, select)) { - used_in_bits |= 0 | GROUPB | 0 | 0; - used_out_bits |= 0 | GROUPB | 0 | 0; - } - /* mio same as shared RAM ? */ - if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, mio, select)) { - used_in_bits |= (GROUPA & ~(1<<0)) | 0 |0 |GROUPD_LOW; - used_out_bits |= (GROUPA & ~(1<<0|1<<1|1<<2)) | 0 |0 |GROUPD_LOW; - } - if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi1, select)) { - used_in_bits |= 0 | 0 | GROUPC | GROUPD; - used_out_bits |= 0 | 0 | GROUPC | GROUPD; - } - if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi0w, select)) { - used_in_bits |= GROUPA | GROUPB | 0 | (GROUPD_LOW | 1<<24); - used_out_bits |= GROUPA | GROUPB | 0 | (GROUPD_LOW | 1<<24 | 1<<25|1<<26); - } + spin_lock_irqsave(&gpio_lock, flags); - if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, par1, select)) { - used_in_bits |= 0 | 0 | 0 | (GROUPD & ~(1<<24)); - used_out_bits |= 0 | 0 | 0 | (GROUPD & ~(1<<24)); - } - if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ser3, select)) { - used_in_bits |= 0 | 0 | GROUPC | 0; - used_out_bits |= 0 | 0 | GROUPC | 0; - } - /* mio same as shared RAM-W? */ - if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, mio_w, select)) { - used_in_bits |= (GROUPA & ~(1<<0)) | 0 | 0 |GROUPD_LOW; - used_out_bits |= (GROUPA & ~(1<<0|1<<1|1<<2)) | 0 | 0 |GROUPD_LOW; - } - /* TODO: USB p2, parw, sync ser3? */ + dir_g_in_bits = gpio_in_available; + dir_g_out_bits = gpio_out_available; /* Initialise the dir_g_shadow etc. depending on genconfig */ /* 0=input 1=output */ @@ -868,10 +875,7 @@ static void __init gpio_init_port_g(void) if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g24dir, out)) dir_g_shadow |= (1 << 24); - dir_g_in_bits = ~used_in_bits; - dir_g_out_bits = ~used_out_bits; - - changeable_dir_g = 0x01FFFF01; /* all that can change dir */ + changeable_dir_g = changeable_dir_g_mask; changeable_dir_g &= dir_g_out_bits; changeable_dir_g &= dir_g_in_bits; /* Correct the bits that can change direction */ @@ -880,6 +884,7 @@ static void __init gpio_init_port_g(void) dir_g_in_bits &= ~changeable_dir_g; dir_g_in_bits |= (~dir_g_shadow & changeable_dir_g); + spin_unlock_irqrestore(&gpio_lock, flags); printk(KERN_INFO "GPIO port G: in_bits: 0x%08lX out_bits: 0x%08lX val: %08lX\n", dir_g_in_bits, dir_g_out_bits, (unsigned long)*R_PORT_G_DATA); @@ -896,6 +901,7 @@ gpio_init(void) #if defined (CONFIG_ETRAX_CSP0_LEDS) int i; #endif + printk("gpio init\n"); /* do the formalities */ @@ -919,8 +925,13 @@ gpio_init(void) #endif #endif - gpio_init_port_g(); - printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002 Axis Communications AB\n"); + /* The I/O interface allocation watcher will be called when + * registering it. */ + if (cris_io_interface_register_watcher(ioif_watcher)){ + printk(KERN_WARNING "gpio_init: Failed to install IO if allocator watcher\n"); + } + + printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002, 2003, 2004 Axis Communications AB\n"); /* We call etrax_gpio_wake_up_check() from timer interrupt and * from cpu_idle() in kernel/process.c * The check in cpu_idle() reduces latency from ~15 ms to ~6 ms diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c index 8bbe233ba7b1..b38267d60d30 100644 --- a/arch/cris/arch-v10/drivers/i2c.c +++ b/arch/cris/arch-v10/drivers/i2c.c @@ -12,6 +12,15 @@ *! don't use PB_I2C if DS1302 uses same bits, *! use PB. *! $Log: i2c.c,v $ +*! Revision 1.13 2005/03/07 13:13:07 starvik +*! Added spinlocks to protect states etc +*! +*! Revision 1.12 2005/01/05 06:11:22 starvik +*! No need to do local_irq_disable after local_irq_save. +*! +*! Revision 1.11 2004/12/13 12:21:52 starvik +*! Added I/O and DMA allocators from Linux 2.4 +*! *! Revision 1.9 2004/08/24 06:49:14 starvik *! Whitespace cleanup *! @@ -75,7 +84,7 @@ *! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN *! *!***************************************************************************/ -/* $Id: i2c.c,v 1.9 2004/08/24 06:49:14 starvik Exp $ */ +/* $Id: i2c.c,v 1.13 2005/03/07 13:13:07 starvik Exp $ */ /****************** INCLUDE FILES SECTION ***********************************/ @@ -95,6 +104,7 @@ #include <asm/arch/svinto.h> #include <asm/io.h> #include <asm/delay.h> +#include <asm/arch/io_interface_mux.h> #include "i2c.h" @@ -184,6 +194,7 @@ static const char i2c_name[] = "i2c"; #define i2c_delay(usecs) udelay(usecs) +static DEFINE_SPINLOCK(i2c_lock); /* Protect directions etc */ /****************** FUNCTION DEFINITION SECTION *************************/ @@ -488,13 +499,14 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg, int error, cntr = 3; unsigned long flags; + spin_lock(&i2c_lock); + do { error = 0; /* * we don't like to be interrupted */ local_irq_save(flags); - local_irq_disable(); i2c_start(); /* @@ -538,6 +550,8 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg, i2c_delay(CLOCK_LOW_TIME); + spin_unlock(&i2c_lock); + return -error; } @@ -555,13 +569,14 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg) int error, cntr = 3; unsigned long flags; + spin_lock(&i2c_lock); + do { error = 0; /* * we don't like to be interrupted */ local_irq_save(flags); - local_irq_disable(); /* * generate start condition */ @@ -620,6 +635,8 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg) } while(error && cntr--); + spin_unlock(&i2c_lock); + return b; } @@ -686,15 +703,26 @@ static struct file_operations i2c_fops = { int __init i2c_init(void) { + static int res = 0; + static int first = 1; + + if (!first) { + return res; + } + /* Setup and enable the Port B I2C interface */ #ifndef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C + if ((res = cris_request_io_interface(if_i2c, "I2C"))) { + printk(KERN_CRIT "i2c_init: Failed to get IO interface\n"); + return res; + } + *R_PORT_PB_I2C = port_pb_i2c_shadow |= IO_STATE(R_PORT_PB_I2C, i2c_en, on) | IO_FIELD(R_PORT_PB_I2C, i2c_d, 1) | IO_FIELD(R_PORT_PB_I2C, i2c_clk, 1) | IO_STATE(R_PORT_PB_I2C, i2c_oe_, enable); -#endif port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir0); port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir1); @@ -702,8 +730,26 @@ i2c_init(void) *R_PORT_PB_DIR = (port_pb_dir_shadow |= IO_STATE(R_PORT_PB_DIR, dir0, input) | IO_STATE(R_PORT_PB_DIR, dir1, output)); +#else + if ((res = cris_io_interface_allocate_pins(if_i2c, + 'b', + CONFIG_ETRAX_I2C_DATA_PORT, + CONFIG_ETRAX_I2C_DATA_PORT))) { + printk(KERN_WARNING "i2c_init: Failed to get IO pin for I2C data port\n"); + return res; + } else if ((res = cris_io_interface_allocate_pins(if_i2c, + 'b', + CONFIG_ETRAX_I2C_CLK_PORT, + CONFIG_ETRAX_I2C_CLK_PORT))) { + cris_io_interface_free_pins(if_i2c, + 'b', + CONFIG_ETRAX_I2C_DATA_PORT, + CONFIG_ETRAX_I2C_DATA_PORT); + printk(KERN_WARNING "i2c_init: Failed to get IO pin for I2C clk port\n"); + } +#endif - return 0; + return res; } static int __init @@ -711,14 +757,16 @@ i2c_register(void) { int res; - i2c_init(); + res = i2c_init(); + if (res < 0) + return res; res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops); if(res < 0) { printk(KERN_ERR "i2c: couldn't get a major number.\n"); return res; } - printk(KERN_INFO "I2C driver v2.2, (c) 1999-2001 Axis Communications AB\n"); + printk(KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n"); return 0; } diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c index b3dfdf7b8fc5..201f4c90d961 100644 --- a/arch/cris/arch-v10/drivers/pcf8563.c +++ b/arch/cris/arch-v10/drivers/pcf8563.c @@ -15,7 +15,7 @@ * * Author: Tobias Anderberg <tobiasa@axis.com>. * - * $Id: pcf8563.c,v 1.8 2004/08/24 06:42:51 starvik Exp $ + * $Id: pcf8563.c,v 1.11 2005/03/07 13:13:07 starvik Exp $ */ #include <linux/config.h> @@ -40,7 +40,7 @@ #define PCF8563_MAJOR 121 /* Local major number. */ #define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */ #define PCF8563_NAME "PCF8563" -#define DRIVER_VERSION "$Revision: 1.8 $" +#define DRIVER_VERSION "$Revision: 1.11 $" /* I2C bus slave registers. */ #define RTC_I2C_READ 0xa3 @@ -49,6 +49,8 @@ /* Two simple wrapper macros, saves a few keystrokes. */ #define rtc_read(x) i2c_readreg(RTC_I2C_READ, x) #define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y) + +static DEFINE_SPINLOCK(rtc_lock); /* Protect state etc */ static const unsigned char days_in_month[] = { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; @@ -125,9 +127,12 @@ get_rtc_time(struct rtc_time *tm) int __init pcf8563_init(void) { - unsigned char ret; + int ret; - i2c_init(); + if ((ret = i2c_init())) { + printk(KERN_CRIT "pcf8563_init: failed to init i2c\n"); + return ret; + } /* * First of all we need to reset the chip. This is done by @@ -200,12 +205,15 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned { struct rtc_time tm; + spin_lock(&rtc_lock); get_rtc_time(&tm); if (copy_to_user((struct rtc_time *) arg, &tm, sizeof(struct rtc_time))) { + spin_unlock(&rtc_lock); return -EFAULT; } + spin_unlock(&rtc_lock); return 0; } break; @@ -250,6 +258,8 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned BIN_TO_BCD(tm.tm_min); BIN_TO_BCD(tm.tm_sec); tm.tm_mon |= century; + + spin_lock(&rtc_lock); rtc_write(RTC_YEAR, tm.tm_year); rtc_write(RTC_MONTH, tm.tm_mon); @@ -258,6 +268,8 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned rtc_write(RTC_MINUTES, tm.tm_min); rtc_write(RTC_SECONDS, tm.tm_sec); + spin_unlock(&rtc_lock); + return 0; #endif /* !CONFIG_ETRAX_RTC_READONLY */ } diff --git a/arch/cris/arch-v10/kernel/Makefile b/arch/cris/arch-v10/kernel/Makefile index 52761603b6a5..dcfec41d3533 100644 --- a/arch/cris/arch-v10/kernel/Makefile +++ b/arch/cris/arch-v10/kernel/Makefile @@ -1,4 +1,4 @@ -# $Id: Makefile,v 1.5 2004/06/02 08:24:38 starvik Exp $ +# $Id: Makefile,v 1.6 2004/12/13 12:21:51 starvik Exp $ # # Makefile for the linux kernel. # @@ -7,7 +7,8 @@ extra-y := head.o obj-y := entry.o traps.o shadows.o debugport.o irq.o \ - process.o setup.o signal.o traps.o time.o ptrace.o + process.o setup.o signal.o traps.o time.o ptrace.o \ + dma.o io_interface_mux.o obj-$(CONFIG_ETRAX_KGDB) += kgdb.o obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c index 6cf069e5e7b6..f3a85b77c17e 100644 --- a/arch/cris/arch-v10/kernel/debugport.c +++ b/arch/cris/arch-v10/kernel/debugport.c @@ -12,6 +12,31 @@ * init_etrax_debug() * * $Log: debugport.c,v $ + * Revision 1.27 2005/06/10 10:34:14 starvik + * Real console support + * + * Revision 1.26 2005/06/07 07:06:07 starvik + * Added LF->CR translation to make ETRAX customers happy. + * + * Revision 1.25 2005/03/08 08:56:47 mikaelam + * Do only set index as port->index if port is defined, otherwise use the index from the command line + * + * Revision 1.24 2005/01/19 10:26:33 mikaelam + * Return the cris serial driver in console device driver callback function + * + * Revision 1.23 2005/01/14 10:12:17 starvik + * KGDB on separate port. + * Console fixes from 2.4. + * + * Revision 1.22 2005/01/11 16:06:13 starvik + * typo + * + * Revision 1.21 2005/01/11 13:49:14 starvik + * Added raw_printk to be used where we don't trust the console. + * + * Revision 1.20 2004/12/27 11:18:32 starvik + * Merge of Linux 2.6.10 (not functional yet). + * * Revision 1.19 2004/10/21 07:26:16 starvik * Made it possible to specify console settings on kernel command line. * @@ -114,7 +139,11 @@ struct dbg_port ports[]= R_SERIAL0_BAUD, R_SERIAL0_TR_CTRL, R_SERIAL0_REC_CTRL, - IO_STATE(R_IRQ_MASK1_SET, ser0_data, set) + IO_STATE(R_IRQ_MASK1_SET, ser0_data, set), + 0, + 115200, + 'N', + 8 }, { 1, @@ -124,7 +153,11 @@ struct dbg_port ports[]= R_SERIAL1_BAUD, R_SERIAL1_TR_CTRL, R_SERIAL1_REC_CTRL, - IO_STATE(R_IRQ_MASK1_SET, ser1_data, set) + IO_STATE(R_IRQ_MASK1_SET, ser1_data, set), + 0, + 115200, + 'N', + 8 }, { 2, @@ -134,7 +167,11 @@ struct dbg_port ports[]= R_SERIAL2_BAUD, R_SERIAL2_TR_CTRL, R_SERIAL2_REC_CTRL, - IO_STATE(R_IRQ_MASK1_SET, ser2_data, set) + IO_STATE(R_IRQ_MASK1_SET, ser2_data, set), + 0, + 115200, + 'N', + 8 }, { 3, @@ -144,11 +181,15 @@ struct dbg_port ports[]= R_SERIAL3_BAUD, R_SERIAL3_TR_CTRL, R_SERIAL3_REC_CTRL, - IO_STATE(R_IRQ_MASK1_SET, ser3_data, set) + IO_STATE(R_IRQ_MASK1_SET, ser3_data, set), + 0, + 115200, + 'N', + 8 } }; -static struct tty_driver *serial_driver; +extern struct tty_driver *serial_driver; struct dbg_port* port = #if defined(CONFIG_ETRAX_DEBUG_PORT0) @@ -162,37 +203,44 @@ struct dbg_port* port = #else NULL; #endif -/* Used by serial.c to register a debug_write_function so that the normal - * serial driver is used for kernel debug output - */ -typedef int (*debugport_write_function)(int i, const char *buf, unsigned int len); -debugport_write_function debug_write_function = NULL; +static struct dbg_port* kgdb_port = +#if defined(CONFIG_ETRAX_KGDB_PORT0) + &ports[0]; +#elif defined(CONFIG_ETRAX_KGDB_PORT1) + &ports[1]; +#elif defined(CONFIG_ETRAX_KGDB_PORT2) + &ports[2]; +#elif defined(CONFIG_ETRAX_KGDB_PORT3) + &ports[3]; +#else + NULL; +#endif static void -start_port(void) +start_port(struct dbg_port* p) { unsigned long rec_ctrl = 0; unsigned long tr_ctrl = 0; - if (!port) + if (!p) return; - if (port->started) + if (p->started) return; - port->started = 1; + p->started = 1; - if (port->index == 0) + if (p->index == 0) { genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused); } - else if (port->index == 1) + else if (p->index == 1) { genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb); } - else if (port->index == 2) + else if (p->index == 2) { genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0); @@ -211,69 +259,69 @@ start_port(void) *R_GEN_CONFIG = genconfig_shadow; - *port->xoff = + *p->xoff = IO_STATE(R_SERIAL0_XOFF, tx_stop, enable) | IO_STATE(R_SERIAL0_XOFF, auto_xoff, disable) | IO_FIELD(R_SERIAL0_XOFF, xoff_char, 0); - switch (port->baudrate) + switch (p->baudrate) { case 0: case 115200: - *port->baud = + *p->baud = IO_STATE(R_SERIAL0_BAUD, tr_baud, c115k2Hz) | IO_STATE(R_SERIAL0_BAUD, rec_baud, c115k2Hz); break; case 1200: - *port->baud = + *p->baud = IO_STATE(R_SERIAL0_BAUD, tr_baud, c1200Hz) | IO_STATE(R_SERIAL0_BAUD, rec_baud, c1200Hz); break; case 2400: - *port->baud = + *p->baud = IO_STATE(R_SERIAL0_BAUD, tr_baud, c2400Hz) | IO_STATE(R_SERIAL0_BAUD, rec_baud, c2400Hz); break; case 4800: - *port->baud = + *p->baud = IO_STATE(R_SERIAL0_BAUD, tr_baud, c4800Hz) | IO_STATE(R_SERIAL0_BAUD, rec_baud, c4800Hz); break; case 9600: - *port->baud = + *p->baud = IO_STATE(R_SERIAL0_BAUD, tr_baud, c9600Hz) | IO_STATE(R_SERIAL0_BAUD, rec_baud, c9600Hz); break; case 19200: - *port->baud = + *p->baud = IO_STATE(R_SERIAL0_BAUD, tr_baud, c19k2Hz) | IO_STATE(R_SERIAL0_BAUD, rec_baud, c19k2Hz); break; case 38400: - *port->baud = + *p->baud = IO_STATE(R_SERIAL0_BAUD, tr_baud, c38k4Hz) | IO_STATE(R_SERIAL0_BAUD, rec_baud, c38k4Hz); break; case 57600: - *port->baud = + *p->baud = IO_STATE(R_SERIAL0_BAUD, tr_baud, c57k6Hz) | IO_STATE(R_SERIAL0_BAUD, rec_baud, c57k6Hz); break; default: - *port->baud = + *p->baud = IO_STATE(R_SERIAL0_BAUD, tr_baud, c115k2Hz) | IO_STATE(R_SERIAL0_BAUD, rec_baud, c115k2Hz); break; } - if (port->parity == 'E') { + if (p->parity == 'E') { rec_ctrl = IO_STATE(R_SERIAL0_REC_CTRL, rec_par, even) | IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable); tr_ctrl = IO_STATE(R_SERIAL0_TR_CTRL, tr_par, even) | IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable); - } else if (port->parity == 'O') { + } else if (p->parity == 'O') { rec_ctrl = IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd) | IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable); @@ -288,8 +336,7 @@ start_port(void) IO_STATE(R_SERIAL0_TR_CTRL, tr_par, even) | IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, disable); } - - if (port->bits == 7) + if (p->bits == 7) { rec_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit); tr_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit); @@ -300,7 +347,7 @@ start_port(void) tr_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_8bit); } - *port->rec_ctrl = + *p->rec_ctrl = IO_STATE(R_SERIAL0_REC_CTRL, dma_err, stop) | IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable) | IO_STATE(R_SERIAL0_REC_CTRL, rts_, active) | @@ -308,7 +355,7 @@ start_port(void) IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, normal) | rec_ctrl; - *port->tr_ctrl = + *p->tr_ctrl = IO_FIELD(R_SERIAL0_TR_CTRL, txd, 0) | IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable) | IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, disabled) | @@ -323,8 +370,18 @@ console_write_direct(struct console *co, const char *buf, unsigned int len) int i; unsigned long flags; local_irq_save(flags); + + if (!port) + return; + /* Send data */ for (i = 0; i < len; i++) { + /* LF -> CRLF */ + if (buf[i] == '\n') { + while (!(*port->read & IO_MASK(R_SERIAL0_READ, tr_ready))) + ; + *port->write = '\r'; + } /* Wait until transmitter is ready and send.*/ while (!(*port->read & IO_MASK(R_SERIAL0_READ, tr_ready))) ; @@ -333,6 +390,25 @@ console_write_direct(struct console *co, const char *buf, unsigned int len) local_irq_restore(flags); } +int raw_printk(const char *fmt, ...) +{ + static char buf[1024]; + int printed_len; + static int first = 1; + if (first) { + /* Force reinitialization of the port to get manual mode. */ + port->started = 0; + start_port(port); + first = 0; + } + va_list args; + va_start(args, fmt); + printed_len = vsnprintf(buf, sizeof(buf), fmt, args); + va_end(args); + console_write_direct(NULL, buf, strlen(buf)); + return printed_len; +} + static void console_write(struct console *co, const char *buf, unsigned int len) { @@ -345,18 +421,7 @@ console_write(struct console *co, const char *buf, unsigned int len) return; #endif - start_port(); - -#ifdef CONFIG_ETRAX_KGDB - /* kgdb needs to output debug info using the gdb protocol */ - putDebugString(buf, len); - return; -#endif - - if (debug_write_function) - debug_write_function(co->index, buf, len); - else - console_write_direct(co, buf, len); + console_write_direct(co, buf, len); } /* legacy function */ @@ -374,8 +439,11 @@ getDebugChar(void) { unsigned long readval; + if (!kgdb_port) + return 0; + do { - readval = *port->read; + readval = *kgdb_port->read; } while (!(readval & IO_MASK(R_SERIAL0_READ, data_avail))); return (readval & IO_MASK(R_SERIAL0_READ, data_in)); @@ -386,9 +454,12 @@ getDebugChar(void) void putDebugChar(int val) { - while (!(*port->read & IO_MASK(R_SERIAL0_READ, tr_ready))) + if (!kgdb_port) + return; + + while (!(*kgdb_port->read & IO_MASK(R_SERIAL0_READ, tr_ready))) ; - *port->write = val; + *kgdb_port->write = val; } /* Enable irq for receiving chars on the debug port, used by kgdb */ @@ -396,19 +467,16 @@ putDebugChar(int val) void enableDebugIRQ(void) { - *R_IRQ_MASK1_SET = port->irq; + if (!kgdb_port) + return; + + *R_IRQ_MASK1_SET = kgdb_port->irq; /* use R_VECT_MASK directly, since we really bypass Linux normal * IRQ handling in kgdb anyway, we don't need to use enable_irq */ *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set); - *port->rec_ctrl = IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable); -} - -static struct tty_driver* -etrax_console_device(struct console* co, int *index) -{ - return serial_driver; + *kgdb_port->rec_ctrl = IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable); } static int __init @@ -428,11 +496,69 @@ console_setup(struct console *co, char *options) if (*s) port->parity = *s++; if (*s) port->bits = *s++ - '0'; port->started = 0; - start_port(); + start_port(0); } return 0; } +/* This is a dummy serial device that throws away anything written to it. + * This is used when no debug output is wanted. + */ +static struct tty_driver dummy_driver; + +static int dummy_open(struct tty_struct *tty, struct file * filp) +{ + return 0; +} + +static void dummy_close(struct tty_struct *tty, struct file * filp) +{ +} + +static int dummy_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + return count; +} + +static int +dummy_write_room(struct tty_struct *tty) +{ + return 8192; +} + +void __init +init_dummy_console(void) +{ + memset(&dummy_driver, 0, sizeof(struct tty_driver)); + dummy_driver.driver_name = "serial"; + dummy_driver.name = "ttyS"; + dummy_driver.major = TTY_MAJOR; + dummy_driver.minor_start = 68; + dummy_driver.num = 1; /* etrax100 has 4 serial ports */ + dummy_driver.type = TTY_DRIVER_TYPE_SERIAL; + dummy_driver.subtype = SERIAL_TYPE_NORMAL; + dummy_driver.init_termios = tty_std_termios; + dummy_driver.init_termios.c_cflag = + B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */ + dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS; + + dummy_driver.open = dummy_open; + dummy_driver.close = dummy_close; + dummy_driver.write = dummy_write; + dummy_driver.write_room = dummy_write_room; + if (tty_register_driver(&dummy_driver)) + panic("Couldn't register dummy serial driver\n"); +} + +static struct tty_driver* +etrax_console_device(struct console* co, int *index) +{ + if (port) + *index = port->index; + return port ? serial_driver : &dummy_driver; +} + static struct console sercons = { name : "ttyS", write: console_write, @@ -504,28 +630,21 @@ init_etrax_debug(void) static int first = 1; if (!first) { - if (!port) { - register_console(&sercons0); - register_console(&sercons1); - register_console(&sercons2); - register_console(&sercons3); - unregister_console(&sercons); - } + unregister_console(&sercons); + register_console(&sercons0); + register_console(&sercons1); + register_console(&sercons2); + register_console(&sercons3); + init_dummy_console(); return 0; } - first = 0; - if (port) - register_console(&sercons); - return 0; -} -int __init -init_console(void) -{ - serial_driver = alloc_tty_driver(1); - if (!serial_driver) - return -ENOMEM; + first = 0; + register_console(&sercons); + start_port(port); +#ifdef CONFIG_ETRAX_KGDB + start_port(kgdb_port); +#endif return 0; } - __initcall(init_etrax_debug); diff --git a/arch/cris/arch-v10/kernel/dma.c b/arch/cris/arch-v10/kernel/dma.c new file mode 100644 index 000000000000..e9a0311b141d --- /dev/null +++ b/arch/cris/arch-v10/kernel/dma.c @@ -0,0 +1,287 @@ +/* Wrapper for DMA channel allocator that updates DMA client muxing. + * Copyright 2004, Axis Communications AB + * $Id: dma.c,v 1.1 2004/12/13 12:21:51 starvik Exp $ + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> + +#include <asm/dma.h> +#include <asm/arch/svinto.h> + +/* Macro to access ETRAX 100 registers */ +#define SETS(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \ + IO_STATE_(reg##_, field##_, _##val) + + +static char used_dma_channels[MAX_DMA_CHANNELS]; +static const char * used_dma_channels_users[MAX_DMA_CHANNELS]; + +int cris_request_dma(unsigned int dmanr, const char * device_id, + unsigned options, enum dma_owner owner) +{ + unsigned long flags; + unsigned long int gens; + int fail = -EINVAL; + + if ((dmanr < 0) || (dmanr >= MAX_DMA_CHANNELS)) { + printk(KERN_CRIT "cris_request_dma: invalid DMA channel %u\n", dmanr); + return -EINVAL; + } + + local_irq_save(flags); + if (used_dma_channels[dmanr]) { + local_irq_restore(flags); + if (options & DMA_VERBOSE_ON_ERROR) { + printk(KERN_CRIT "Failed to request DMA %i for %s, already allocated by %s\n", dmanr, device_id, used_dma_channels_users[dmanr]); + } + if (options & DMA_PANIC_ON_ERROR) { + panic("request_dma error!"); + } + return -EBUSY; + } + + gens = genconfig_shadow; + + switch(owner) + { + case dma_eth: + if ((dmanr != NETWORK_TX_DMA_NBR) && + (dmanr != NETWORK_RX_DMA_NBR)) { + printk(KERN_CRIT "Invalid DMA channel for eth\n"); + goto bail; + } + break; + case dma_ser0: + if (dmanr == SER0_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma6, serial0); + } else if (dmanr == SER0_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma7, serial0); + } else { + printk(KERN_CRIT "Invalid DMA channel for ser0\n"); + goto bail; + } + break; + case dma_ser1: + if (dmanr == SER1_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma8, serial1); + } else if (dmanr == SER1_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma9, serial1); + } else { + printk(KERN_CRIT "Invalid DMA channel for ser1\n"); + goto bail; + } + break; + case dma_ser2: + if (dmanr == SER2_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma2, serial2); + } else if (dmanr == SER2_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma3, serial2); + } else { + printk(KERN_CRIT "Invalid DMA channel for ser2\n"); + goto bail; + } + break; + case dma_ser3: + if (dmanr == SER3_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma4, serial3); + } else if (dmanr == SER3_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma5, serial3); + } else { + printk(KERN_CRIT "Invalid DMA channel for ser3\n"); + goto bail; + } + break; + case dma_ata: + if (dmanr == ATA_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma2, ata); + } else if (dmanr == ATA_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma3, ata); + } else { + printk(KERN_CRIT "Invalid DMA channel for ata\n"); + goto bail; + } + break; + case dma_ext0: + if (dmanr == EXTDMA0_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma4, extdma0); + } else if (dmanr == EXTDMA0_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma5, extdma0); + } else { + printk(KERN_CRIT "Invalid DMA channel for ext0\n"); + goto bail; + } + break; + case dma_ext1: + if (dmanr == EXTDMA1_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma6, extdma1); + } else if (dmanr == EXTDMA1_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma7, extdma1); + } else { + printk(KERN_CRIT "Invalid DMA channel for ext1\n"); + goto bail; + } + break; + case dma_int6: + if (dmanr == MEM2MEM_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma7, intdma6); + } else { + printk(KERN_CRIT "Invalid DMA channel for int6\n"); + goto bail; + } + break; + case dma_int7: + if (dmanr == MEM2MEM_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma6, intdma7); + } else { + printk(KERN_CRIT "Invalid DMA channel for int7\n"); + goto bail; + } + break; + case dma_usb: + if (dmanr == USB_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma8, usb); + } else if (dmanr == USB_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma9, usb); + } else { + printk(KERN_CRIT "Invalid DMA channel for usb\n"); + goto bail; + } + break; + case dma_scsi0: + if (dmanr == SCSI0_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma2, scsi0); + } else if (dmanr == SCSI0_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma3, scsi0); + } else { + printk(KERN_CRIT "Invalid DMA channel for scsi0\n"); + goto bail; + } + break; + case dma_scsi1: + if (dmanr == SCSI1_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma4, scsi1); + } else if (dmanr == SCSI1_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma5, scsi1); + } else { + printk(KERN_CRIT "Invalid DMA channel for scsi1\n"); + goto bail; + } + break; + case dma_par0: + if (dmanr == PAR0_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma2, par0); + } else if (dmanr == PAR0_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma3, par0); + } else { + printk(KERN_CRIT "Invalid DMA channel for par0\n"); + goto bail; + } + break; + case dma_par1: + if (dmanr == PAR1_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma4, par1); + } else if (dmanr == PAR1_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma5, par1); + } else { + printk(KERN_CRIT "Invalid DMA channel for par1\n"); + goto bail; + } + break; + default: + printk(KERN_CRIT "Invalid DMA owner.\n"); + goto bail; + } + + used_dma_channels[dmanr] = 1; + used_dma_channels_users[dmanr] = device_id; + + { + volatile int i; + genconfig_shadow = gens; + *R_GEN_CONFIG = genconfig_shadow; + /* Wait 12 cycles before doing any DMA command */ + for(i = 6; i > 0; i--) + nop(); + } + fail = 0; + bail: + local_irq_restore(flags); + return fail; +} + +void cris_free_dma(unsigned int dmanr, const char * device_id) +{ + unsigned long flags; + if ((dmanr < 0) || (dmanr >= MAX_DMA_CHANNELS)) { + printk(KERN_CRIT "cris_free_dma: invalid DMA channel %u\n", dmanr); + return; + } + + local_irq_save(flags); + if (!used_dma_channels[dmanr]) { + printk(KERN_CRIT "cris_free_dma: DMA channel %u not allocated\n", dmanr); + } else if (device_id != used_dma_channels_users[dmanr]) { + printk(KERN_CRIT "cris_free_dma: DMA channel %u not allocated by device\n", dmanr); + } else { + switch(dmanr) + { + case 0: + *R_DMA_CH0_CMD = IO_STATE(R_DMA_CH0_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH0_CMD, cmd, *R_DMA_CH0_CMD) == + IO_STATE_VALUE(R_DMA_CH0_CMD, cmd, reset)); + break; + case 1: + *R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH1_CMD, cmd, *R_DMA_CH1_CMD) == + IO_STATE_VALUE(R_DMA_CH1_CMD, cmd, reset)); + break; + case 2: + *R_DMA_CH2_CMD = IO_STATE(R_DMA_CH2_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH2_CMD, cmd, *R_DMA_CH2_CMD) == + IO_STATE_VALUE(R_DMA_CH2_CMD, cmd, reset)); + break; + case 3: + *R_DMA_CH3_CMD = IO_STATE(R_DMA_CH3_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH3_CMD, cmd, *R_DMA_CH3_CMD) == + IO_STATE_VALUE(R_DMA_CH3_CMD, cmd, reset)); + break; + case 4: + *R_DMA_CH4_CMD = IO_STATE(R_DMA_CH4_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH4_CMD, cmd, *R_DMA_CH4_CMD) == + IO_STATE_VALUE(R_DMA_CH4_CMD, cmd, reset)); + break; + case 5: + *R_DMA_CH5_CMD = IO_STATE(R_DMA_CH5_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH5_CMD, cmd, *R_DMA_CH5_CMD) == + IO_STATE_VALUE(R_DMA_CH5_CMD, cmd, reset)); + break; + case 6: + *R_DMA_CH6_CMD = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *R_DMA_CH6_CMD) == + IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); + break; + case 7: + *R_DMA_CH7_CMD = IO_STATE(R_DMA_CH7_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH7_CMD, cmd, *R_DMA_CH7_CMD) == + IO_STATE_VALUE(R_DMA_CH7_CMD, cmd, reset)); + break; + case 8: + *R_DMA_CH8_CMD = IO_STATE(R_DMA_CH8_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH8_CMD, cmd, *R_DMA_CH8_CMD) == + IO_STATE_VALUE(R_DMA_CH8_CMD, cmd, reset)); + break; + case 9: + *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH9_CMD, cmd, *R_DMA_CH9_CMD) == + IO_STATE_VALUE(R_DMA_CH9_CMD, cmd, reset)); + break; + } + used_dma_channels[dmanr] = 0; + } + local_irq_restore(flags); +} + +EXPORT_SYMBOL(cris_request_dma); +EXPORT_SYMBOL(cris_free_dma); diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index 1bc44f481c34..c0163bf94a50 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -1,4 +1,4 @@ -/* $Id: entry.S,v 1.23 2004/10/19 13:07:37 starvik Exp $ +/* $Id: entry.S,v 1.28 2005/06/20 05:06:30 starvik Exp $ * * linux/arch/cris/entry.S * @@ -7,6 +7,22 @@ * Authors: Bjorn Wesen (bjornw@axis.com) * * $Log: entry.S,v $ + * Revision 1.28 2005/06/20 05:06:30 starvik + * Remove unnecessary diff to kernel.org tree + * + * Revision 1.27 2005/03/04 08:16:16 starvik + * Merge of Linux 2.6.11. + * + * Revision 1.26 2005/01/11 13:49:47 starvik + * Added NMI handler. + * + * Revision 1.25 2004/12/27 11:18:32 starvik + * Merge of Linux 2.6.10 (not functional yet). + * + * Revision 1.24 2004/12/22 10:41:23 starvik + * Updates to make v10 compile with the latest SMP aware generic code (even + * though v10 will never have SMP). + * * Revision 1.23 2004/10/19 13:07:37 starvik * Merge of Linux 2.6.9 * @@ -279,6 +295,7 @@ #ifdef CONFIG_PREEMPT ; Check if preemptive kernel scheduling should be done _resume_kernel: + di ; Load current task struct movs.w -8192, $r0 ; THREAD_SIZE = 8192 and.d $sp, $r0 @@ -291,12 +308,7 @@ _need_resched: bpl _Rexit nop ; Ok, lets's do some preemptive kernel scheduling - move.d PREEMPT_ACTIVE, $r10 - move.d $r10, [$r0+TI_preempt_count] ; Mark as active - ei - jsr schedule - clear.d [$r0+TI_preempt_count] ; Mark as inactive - di + jsr preempt_schedule_irq ; Load new task struct movs.w -8192, $r0 ; THREAD_SIZE = 8192 and.d $sp, $r0 @@ -590,15 +602,15 @@ mmu_bus_fault: move.d $r0, [$sp+16] 1: btstq 12, $r1 ; Refill? bpl 2f - lsrq PMD_SHIFT, $r1 ; Get PMD index into PGD (bit 24-31) - move.d [current_pgd], $r0 ; PGD for the current process + lsrq 24, $r1 ; Get PGD index (bit 24-31) + move.d [per_cpu__current_pgd], $r0 ; PGD for the current process move.d [$r0+$r1.d], $r0 ; Get PMD beq 2f nop and.w PAGE_MASK, $r0 ; Remove PMD flags move.d [R_MMU_CAUSE], $r1 lsrq PAGE_SHIFT, $r1 - and.d 0x7ff, $r1 ; Get PTE index into PMD (bit 13-24) + and.d 0x7ff, $r1 ; Get PTE index into PGD (bit 13-23) move.d [$r0+$r1.d], $r1 ; Get PTE beq 2f nop @@ -656,11 +668,6 @@ hwbreakpoint: nop IRQ1_interrupt: - -#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) -;; If we receive a watchdog interrupt while it is not expected, then set -;; up a canonical frame and dump register contents before dying. - ;; this prologue MUST match the one in irq.h and the struct in ptregs.h!!! move $brp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame push $srp @@ -672,9 +679,16 @@ IRQ1_interrupt: push $r10 ; push orig_r10 clear.d [$sp=$sp-4] ; frametype == 0, normal frame -;; We don't check that we actually were bit by the watchdog as opposed to -;; an external NMI, since there is currently no handler for external NMI. - + move.d [R_IRQ_MASK0_RD], $r1 ; External NMI or watchdog? + and.d 0x80000000, $r1 + beq wdog + move.d $sp, $r10 + jsr handle_nmi + setf m ; Enable NMI again + retb ; Return from NMI + nop +wdog: +#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) ;; Check if we're waiting for reset to happen, as signalled by ;; hard_reset_now setting cause_of_death to a magic value. If so, just ;; get stuck until reset happens. @@ -1118,6 +1132,10 @@ sys_call_table: .long sys_mq_getsetattr .long sys_ni_syscall /* reserved for kexec */ .long sys_waitid + .long sys_ni_syscall /* 285 */ /* available */ + .long sys_add_key + .long sys_request_key + .long sys_keyctl /* * NOTE!! This doesn't have to be exact - we just have diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c index 4717f7ae8e51..094ff45ae85b 100644 --- a/arch/cris/arch-v10/kernel/fasttimer.c +++ b/arch/cris/arch-v10/kernel/fasttimer.c @@ -1,10 +1,20 @@ -/* $Id: fasttimer.c,v 1.6 2004/05/14 10:18:39 starvik Exp $ +/* $Id: fasttimer.c,v 1.9 2005/03/04 08:16:16 starvik Exp $ * linux/arch/cris/kernel/fasttimer.c * * Fast timers for ETRAX100/ETRAX100LX * This may be useful in other OS than Linux so use 2 space indentation... * * $Log: fasttimer.c,v $ + * Revision 1.9 2005/03/04 08:16:16 starvik + * Merge of Linux 2.6.11. + * + * Revision 1.8 2005/01/05 06:09:29 starvik + * cli()/sti() will be obsolete in 2.6.11. + * + * Revision 1.7 2005/01/03 13:35:46 starvik + * Removed obsolete stuff. + * Mark fast timer IRQ as not shared. + * * Revision 1.6 2004/05/14 10:18:39 starvik * Export fast_timer_list * @@ -148,8 +158,7 @@ static int debug_log_cnt_wrapped = 0; #define DEBUG_LOG(string, value) \ { \ unsigned long log_flags; \ - save_flags(log_flags); \ - cli(); \ + local_irq_save(log_flags); \ debug_log_string[debug_log_cnt] = (string); \ debug_log_value[debug_log_cnt] = (unsigned long)(value); \ if (++debug_log_cnt >= DEBUG_LOG_MAX) \ @@ -157,7 +166,7 @@ static int debug_log_cnt_wrapped = 0; debug_log_cnt = debug_log_cnt % DEBUG_LOG_MAX; \ debug_log_cnt_wrapped = 1; \ } \ - restore_flags(log_flags); \ + local_irq_restore(log_flags); \ } #else #define DEBUG_LOG(string, value) @@ -320,8 +329,7 @@ void start_one_shot_timer(struct fast_timer *t, D1(printk("sft %s %d us\n", name, delay_us)); - save_flags(flags); - cli(); + local_irq_save(flags); do_gettimeofday_fast(&t->tv_set); tmp = fast_timer_list; @@ -395,7 +403,7 @@ void start_one_shot_timer(struct fast_timer *t, D2(printk("start_one_shot_timer: %d us done\n", delay_us)); - restore_flags(flags); + local_irq_restore(flags); } /* start_one_shot_timer */ static inline int fast_timer_pending (const struct fast_timer * t) @@ -425,11 +433,10 @@ int del_fast_timer(struct fast_timer * t) unsigned long flags; int ret; - save_flags(flags); - cli(); + local_irq_save(flags); ret = detach_fast_timer(t); t->next = t->prev = NULL; - restore_flags(flags); + local_irq_restore(flags); return ret; } /* del_fast_timer */ @@ -444,8 +451,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs) struct fast_timer *t; unsigned long flags; - save_flags(flags); - cli(); + local_irq_save(flags); /* Clear timer1 irq */ *R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr); @@ -462,7 +468,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs) fast_timer_running = 0; fast_timer_ints++; - restore_flags(flags); + local_irq_restore(flags); t = fast_timer_list; while (t) @@ -482,8 +488,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs) fast_timers_expired++; /* Remove this timer before call, since it may reuse the timer */ - save_flags(flags); - cli(); + local_irq_save(flags); if (t->prev) { t->prev->next = t->next; @@ -498,7 +503,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs) } t->prev = NULL; t->next = NULL; - restore_flags(flags); + local_irq_restore(flags); if (t->function != NULL) { @@ -515,8 +520,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs) D1(printk(".\n")); } - save_flags(flags); - cli(); + local_irq_save(flags); if ((t = fast_timer_list) != NULL) { /* Start next timer.. */ @@ -535,7 +539,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs) #endif start_timer1(us); } - restore_flags(flags); + local_irq_restore(flags); break; } else @@ -546,7 +550,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs) D1(printk("e! %d\n", us)); } } - restore_flags(flags); + local_irq_restore(flags); } if (!t) @@ -748,13 +752,12 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len #endif used += sprintf(bigbuf + used, "Active timers:\n"); - save_flags(flags); - cli(); + local_irq_save(flags); t = fast_timer_list; while (t != NULL && (used+100 < BIG_BUF_SIZE)) { nextt = t->next; - restore_flags(flags); + local_irq_restore(flags); used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu " "d: %6li us data: 0x%08lX" /* " func: 0x%08lX" */ @@ -768,14 +771,14 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len t->data /* , t->function */ ); - cli(); + local_irq_disable(); if (t->next != nextt) { printk(KERN_WARNING "timer removed!\n"); } t = nextt; } - restore_flags(flags); + local_irq_restore(flags); } if (used - offset < len) @@ -963,7 +966,7 @@ void fast_timer_init(void) if ((fasttimer_proc_entry = create_proc_entry( "fasttimer", 0, 0 ))) fasttimer_proc_entry->read_proc = proc_fasttimer_read; #endif /* PROC_FS */ - if(request_irq(TIMER1_IRQ_NBR, timer1_handler, SA_SHIRQ, + if(request_irq(TIMER1_IRQ_NBR, timer1_handler, 0, "fast timer int", NULL)) { printk("err: timer1 irq\n"); diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S index 2c1dd1184a8f..f00c145b43f1 100644 --- a/arch/cris/arch-v10/kernel/head.S +++ b/arch/cris/arch-v10/kernel/head.S @@ -1,4 +1,4 @@ -/* $Id: head.S,v 1.7 2004/05/14 07:58:01 starvik Exp $ +/* $Id: head.S,v 1.10 2005/06/20 05:12:54 starvik Exp $ * * Head of the kernel - alter with care * @@ -7,6 +7,16 @@ * Authors: Bjorn Wesen (bjornw@axis.com) * * $Log: head.S,v $ + * Revision 1.10 2005/06/20 05:12:54 starvik + * Remove unnecessary diff to kernel.org tree + * + * Revision 1.9 2004/12/13 12:21:51 starvik + * Added I/O and DMA allocators from Linux 2.4 + * + * Revision 1.8 2004/11/22 11:41:14 starvik + * Kernel command line may be supplied to kernel. Not used by Axis but may + * be used by customers. + * * Revision 1.7 2004/05/14 07:58:01 starvik * Merge of changes from 2.4 * @@ -181,6 +191,7 @@ #define CRAMFS_MAGIC 0x28cd3d45 #define RAM_INIT_MAGIC 0x56902387 +#define COMMAND_LINE_MAGIC 0x87109563 #define START_ETHERNET_CLOCK IO_STATE(R_NETWORK_GEN_CONFIG, enable, on) |\ IO_STATE(R_NETWORK_GEN_CONFIG, phy, mii_clk) @@ -490,6 +501,23 @@ _no_romfs_in_flash: _start_it: + ;; Check if kernel command line is supplied + cmp.d COMMAND_LINE_MAGIC, $r10 + bne no_command_line + nop + + move.d 256, $r13 + move.d cris_command_line, $r10 + or.d 0x80000000, $r11 ; Make it virtual +1: + move.b [$r11+], $r12 + move.b $r12, [$r10+] + subq 1, $r13 + bne 1b + nop + +no_command_line: + ;; the kernel stack is overlayed with the task structure for each ;; task. thus the initial kernel stack is in the same page as the ;; init_task (but starts in the top of the page, size 8192) @@ -567,76 +595,32 @@ _start_it: ;; Etrax product HW genconfig setup moveq 0,$r0 -#if (!defined(CONFIG_ETRAX_KGDB) || !defined(CONFIG_ETRAX_DEBUG_PORT0)) \ - && !defined(CONFIG_DMA_MEMCPY) - ; DMA channels 6 and 7 to ser0, kgdb doesnt want DMA - or.d IO_STATE (R_GEN_CONFIG, dma7, serial0) \ - | IO_STATE (R_GEN_CONFIG, dma6, serial0),$r0 -#endif -#if !defined(CONFIG_ETRAX_KGDB) || !defined(CONFIG_ETRAX_DEBUG_PORT1) - ; DMA channels 8 and 9 to ser1, kgdb doesnt want DMA - or.d IO_STATE (R_GEN_CONFIG, dma9, serial1) \ - | IO_STATE (R_GEN_CONFIG, dma8, serial1),$r0 -#endif -#ifdef CONFIG_DMA_MEMCPY - ; 6/7 memory-memory DMA - or.d IO_STATE (R_GEN_CONFIG, dma7, intdma6) \ - | IO_STATE (R_GEN_CONFIG, dma6, intdma7),$r0 -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT2 - ; Enable serial port 2 - or.w IO_STATE (R_GEN_CONFIG, ser2, select),$r0 -#if !defined(CONFIG_ETRAX_KGDB) || !defined(CONFIG_ETRAX_DEBUG_PORT2) - ; DMA channels 2 and 3 to ser2, kgdb doesnt want DMA - or.d IO_STATE (R_GEN_CONFIG, dma3, serial2) \ - | IO_STATE (R_GEN_CONFIG, dma2, serial2),$r0 -#endif -#endif -#if defined(CONFIG_ETRAX_SERIAL_PORT3) || defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) - ; Enable serial port 3 - or.w IO_STATE (R_GEN_CONFIG, ser3, select),$r0 -#if !defined(CONFIG_ETRAX_KGDB) || !defined(CONFIG_ETRAX_DEBUG_PORT3) - ; DMA channels 4 and 5 to ser3, kgdb doesnt want DMA - or.d IO_STATE (R_GEN_CONFIG, dma5, serial3) \ - | IO_STATE (R_GEN_CONFIG, dma4, serial3),$r0 -#endif -#endif -#if defined(CONFIG_ETRAX_PARALLEL_PORT0) || defined(CONFIG_ETRAX_ETHERNET_LPSLAVE) - ; parport 0 enabled using DMA 2/3 - or.w IO_STATE (R_GEN_CONFIG, par0, select),$r0 -#endif -#if defined(CONFIG_ETRAX_PARALLEL_PORT1) || defined(CONFIG_ETRAX_ETHERNET_LPSLAVE) - ; parport 1 enabled using DMA 4/5 - or.w IO_STATE (R_GEN_CONFIG, par1, select),$r0 -#endif -#ifdef CONFIG_ETRAX_IDE - ; DMA channels 2 and 3 to ATA, ATA enabled - or.d IO_STATE (R_GEN_CONFIG, dma3, ata) \ - | IO_STATE (R_GEN_CONFIG, dma2, ata) \ - | IO_STATE (R_GEN_CONFIG, ata, select),$r0 -#endif - -#ifdef CONFIG_ETRAX_USB_HOST_PORT1 - ; Set the USB port 1 enable bit - or.d IO_STATE (R_GEN_CONFIG, usb1, select),$r0 -#endif -#ifdef CONFIG_ETRAX_USB_HOST_PORT2 - ; Set the USB port 2 enable bit - or.d IO_STATE (R_GEN_CONFIG, usb2, select),$r0 -#endif -#ifdef CONFIG_ETRAX_USB_HOST - ; Connect DMA channels 8 and 9 to USB - and.d (~(IO_MASK (R_GEN_CONFIG, dma9) \ - | IO_MASK (R_GEN_CONFIG, dma8))) \ - | IO_STATE (R_GEN_CONFIG, dma9, usb) \ - | IO_STATE (R_GEN_CONFIG, dma8, usb),$r0 -#endif - -#ifdef CONFIG_JULIETTE - ; DMA channels 4 and 5 to EXTDMA0, for Juliette - or.d IO_STATE (R_GEN_CONFIG, dma5, extdma0) \ - | IO_STATE (R_GEN_CONFIG, dma4, extdma0),$r0 -#endif + + ;; Init interfaces (disable them). + or.d IO_STATE (R_GEN_CONFIG, scsi0, disable) \ + | IO_STATE (R_GEN_CONFIG, ata, disable) \ + | IO_STATE (R_GEN_CONFIG, par0, disable) \ + | IO_STATE (R_GEN_CONFIG, ser2, disable) \ + | IO_STATE (R_GEN_CONFIG, mio, disable) \ + | IO_STATE (R_GEN_CONFIG, scsi1, disable) \ + | IO_STATE (R_GEN_CONFIG, scsi0w, disable) \ + | IO_STATE (R_GEN_CONFIG, par1, disable) \ + | IO_STATE (R_GEN_CONFIG, ser3, disable) \ + | IO_STATE (R_GEN_CONFIG, mio_w, disable) \ + | IO_STATE (R_GEN_CONFIG, usb1, disable) \ + | IO_STATE (R_GEN_CONFIG, usb2, disable) \ + | IO_STATE (R_GEN_CONFIG, par_w, disable),$r0 + + ;; Init DMA channel muxing (set to unused clients). + or.d IO_STATE (R_GEN_CONFIG, dma2, ata) \ + | IO_STATE (R_GEN_CONFIG, dma3, ata) \ + | IO_STATE (R_GEN_CONFIG, dma4, scsi1) \ + | IO_STATE (R_GEN_CONFIG, dma5, scsi1) \ + | IO_STATE (R_GEN_CONFIG, dma6, unused) \ + | IO_STATE (R_GEN_CONFIG, dma7, unused) \ + | IO_STATE (R_GEN_CONFIG, dma8, usb) \ + | IO_STATE (R_GEN_CONFIG, dma9, usb),$r0 + #if defined(CONFIG_ETRAX_DEF_R_PORT_G0_DIR_OUT) or.d IO_STATE (R_GEN_CONFIG, g0dir, out),$r0 diff --git a/arch/cris/arch-v10/kernel/io_interface_mux.c b/arch/cris/arch-v10/kernel/io_interface_mux.c new file mode 100644 index 000000000000..29d48ad00df9 --- /dev/null +++ b/arch/cris/arch-v10/kernel/io_interface_mux.c @@ -0,0 +1,879 @@ +/* IO interface mux allocator for ETRAX100LX. + * Copyright 2004, Axis Communications AB + * $Id: io_interface_mux.c,v 1.2 2004/12/21 12:08:38 starvik Exp $ + */ + + +/* C.f. ETRAX100LX Designer's Reference 20.9 */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <asm/arch/svinto.h> +#include <asm/io.h> +#include <asm/arch/io_interface_mux.h> + + +#define DBG(s) + +/* Macro to access ETRAX 100 registers */ +#define SETS(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \ + IO_STATE_(reg##_, field##_, _##val) + +enum io_if_group { + group_a = (1<<0), + group_b = (1<<1), + group_c = (1<<2), + group_d = (1<<3), + group_e = (1<<4), + group_f = (1<<5) +}; + +struct watcher +{ + void (*notify)(const unsigned int gpio_in_available, + const unsigned int gpio_out_available, + const unsigned char pa_available, + const unsigned char pb_available); + struct watcher *next; +}; + + +struct if_group +{ + enum io_if_group group; + unsigned char used; + enum cris_io_interface owner; +}; + + +struct interface +{ + enum cris_io_interface ioif; + unsigned char groups; + unsigned char used; + char *owner; + unsigned int gpio_g_in; + unsigned int gpio_g_out; + unsigned char gpio_b; +}; + +static struct if_group if_groups[6] = { + { + .group = group_a, + .used = 0, + }, + { + .group = group_b, + .used = 0, + }, + { + .group = group_c, + .used = 0, + }, + { + .group = group_d, + .used = 0, + }, + { + .group = group_e, + .used = 0, + }, + { + .group = group_f, + .used = 0, + } +}; + +/* The order in the array must match the order of enum + * cris_io_interface in io_interface_mux.h */ +static struct interface interfaces[] = { + /* Begin Non-multiplexed interfaces */ + { + .ioif = if_eth, + .groups = 0, + .gpio_g_in = 0, + .gpio_g_out = 0, + .gpio_b = 0 + }, + { + .ioif = if_serial_0, + .groups = 0, + .gpio_g_in = 0, + .gpio_g_out = 0, + .gpio_b = 0 + }, + /* End Non-multiplexed interfaces */ + { + .ioif = if_serial_1, + .groups = group_e, + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0x00 + }, + { + .ioif = if_serial_2, + .groups = group_b, + .gpio_g_in = 0x000000c0, + .gpio_g_out = 0x000000c0, + .gpio_b = 0x00 + }, + { + .ioif = if_serial_3, + .groups = group_c, + .gpio_g_in = 0xc0000000, + .gpio_g_out = 0xc0000000, + .gpio_b = 0x00 + }, + { + .ioif = if_sync_serial_1, + .groups = group_e | group_f, /* if_sync_serial_1 and if_sync_serial_3 + can be used simultaneously */ + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0x10 + }, + { + .ioif = if_sync_serial_3, + .groups = group_c | group_f, + .gpio_g_in = 0xc0000000, + .gpio_g_out = 0xc0000000, + .gpio_b = 0x80 + }, + { + .ioif = if_shared_ram, + .groups = group_a, + .gpio_g_in = 0x0000ff3e, + .gpio_g_out = 0x0000ff38, + .gpio_b = 0x00 + }, + { + .ioif = if_shared_ram_w, + .groups = group_a | group_d, + .gpio_g_in = 0x00ffff3e, + .gpio_g_out = 0x00ffff38, + .gpio_b = 0x00 + }, + { + .ioif = if_par_0, + .groups = group_a, + .gpio_g_in = 0x0000ff3e, + .gpio_g_out = 0x0000ff3e, + .gpio_b = 0x00 + }, + { + .ioif = if_par_1, + .groups = group_d, + .gpio_g_in = 0x3eff0000, + .gpio_g_out = 0x3eff0000, + .gpio_b = 0x00 + }, + { + .ioif = if_par_w, + .groups = group_a | group_d, + .gpio_g_in = 0x00ffff3e, + .gpio_g_out = 0x00ffff3e, + .gpio_b = 0x00 + }, + { + .ioif = if_scsi8_0, + .groups = group_a | group_b | group_f, /* if_scsi8_0 and if_scsi8_1 + can be used simultaneously */ + .gpio_g_in = 0x0000ffff, + .gpio_g_out = 0x0000ffff, + .gpio_b = 0x10 + }, + { + .ioif = if_scsi8_1, + .groups = group_c | group_d | group_f, /* if_scsi8_0 and if_scsi8_1 + can be used simultaneously */ + .gpio_g_in = 0xffff0000, + .gpio_g_out = 0xffff0000, + .gpio_b = 0x80 + }, + { + .ioif = if_scsi_w, + .groups = group_a | group_b | group_d | group_f, + .gpio_g_in = 0x01ffffff, + .gpio_g_out = 0x07ffffff, + .gpio_b = 0x80 + }, + { + .ioif = if_ata, + .groups = group_a | group_b | group_c | group_d, + .gpio_g_in = 0xf9ffffff, + .gpio_g_out = 0xffffffff, + .gpio_b = 0x80 + }, + { + .ioif = if_csp, + .groups = group_f, /* if_csp and if_i2c can be used simultaneously */ + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0xfc + }, + { + .ioif = if_i2c, + .groups = group_f, /* if_csp and if_i2c can be used simultaneously */ + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0x03 + }, + { + .ioif = if_usb_1, + .groups = group_e | group_f, + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0x2c + }, + { + .ioif = if_usb_2, + .groups = group_d, + .gpio_g_in = 0x0e000000, + .gpio_g_out = 0x3c000000, + .gpio_b = 0x00 + }, + /* GPIO pins */ + { + .ioif = if_gpio_grp_a, + .groups = group_a, + .gpio_g_in = 0x0000ff3f, + .gpio_g_out = 0x0000ff3f, + .gpio_b = 0x00 + }, + { + .ioif = if_gpio_grp_b, + .groups = group_b, + .gpio_g_in = 0x000000c0, + .gpio_g_out = 0x000000c0, + .gpio_b = 0x00 + }, + { + .ioif = if_gpio_grp_c, + .groups = group_c, + .gpio_g_in = 0xc0000000, + .gpio_g_out = 0xc0000000, + .gpio_b = 0x00 + }, + { + .ioif = if_gpio_grp_d, + .groups = group_d, + .gpio_g_in = 0x3fff0000, + .gpio_g_out = 0x3fff0000, + .gpio_b = 0x00 + }, + { + .ioif = if_gpio_grp_e, + .groups = group_e, + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0x00 + }, + { + .ioif = if_gpio_grp_f, + .groups = group_f, + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0xff + } + /* Array end */ +}; + +static struct watcher *watchers = NULL; + +static unsigned int gpio_in_pins = 0xffffffff; +static unsigned int gpio_out_pins = 0xffffffff; +static unsigned char gpio_pb_pins = 0xff; +static unsigned char gpio_pa_pins = 0xff; + +static enum cris_io_interface gpio_pa_owners[8]; +static enum cris_io_interface gpio_pb_owners[8]; +static enum cris_io_interface gpio_pg_owners[32]; + +static int cris_io_interface_init(void); + +static unsigned char clear_group_from_set(const unsigned char groups, struct if_group *group) +{ + return (groups & ~group->group); +} + + +static struct if_group *get_group(const unsigned char groups) +{ + int i; + for (i = 0; i < sizeof(if_groups)/sizeof(struct if_group); i++) { + if (groups & if_groups[i].group) { + return &if_groups[i]; + } + } + return NULL; +} + + +static void notify_watchers(void) +{ + struct watcher *w = watchers; + + DBG(printk("io_interface_mux: notifying watchers\n")); + + while (NULL != w) { + w->notify((const unsigned int)gpio_in_pins, + (const unsigned int)gpio_out_pins, + (const unsigned char)gpio_pa_pins, + (const unsigned char)gpio_pb_pins); + w = w->next; + } +} + + +int cris_request_io_interface(enum cris_io_interface ioif, const char *device_id) +{ + int set_gen_config = 0; + int set_gen_config_ii = 0; + unsigned long int gens; + unsigned long int gens_ii; + struct if_group *grp; + unsigned char group_set; + unsigned long flags; + + (void)cris_io_interface_init(); + + DBG(printk("cris_request_io_interface(%d, \"%s\")\n", ioif, device_id)); + + if ((ioif >= if_max_interfaces) || (ioif < 0)) { + printk(KERN_CRIT "cris_request_io_interface: Bad interface %u submitted for %s\n", + ioif, + device_id); + return -EINVAL; + } + + local_irq_save(flags); + + if (interfaces[ioif].used) { + local_irq_restore(flags); + printk(KERN_CRIT "cris_io_interface: Cannot allocate interface for %s, in use by %s\n", + device_id, + interfaces[ioif].owner); + return -EBUSY; + } + + /* Check that all required groups are free before allocating, */ + group_set = interfaces[ioif].groups; + while (NULL != (grp = get_group(group_set))) { + if (grp->used) { + if (grp->group == group_f) { + if ((if_sync_serial_1 == ioif) || + (if_sync_serial_3 == ioif)) { + if ((grp->owner != if_sync_serial_1) && + (grp->owner != if_sync_serial_3)) { + local_irq_restore(flags); + return -EBUSY; + } + } else if ((if_scsi8_0 == ioif) || + (if_scsi8_1 == ioif)) { + if ((grp->owner != if_scsi8_0) && + (grp->owner != if_scsi8_1)) { + local_irq_restore(flags); + return -EBUSY; + } + } + } else { + local_irq_restore(flags); + return -EBUSY; + } + } + group_set = clear_group_from_set(group_set, grp); + } + + /* Are the required GPIO pins available too? */ + if (((interfaces[ioif].gpio_g_in & gpio_in_pins) != interfaces[ioif].gpio_g_in) || + ((interfaces[ioif].gpio_g_out & gpio_out_pins) != interfaces[ioif].gpio_g_out) || + ((interfaces[ioif].gpio_b & gpio_pb_pins) != interfaces[ioif].gpio_b)) { + printk(KERN_CRIT "cris_request_io_interface: Could not get required pins for interface %u\n", + ioif); + return -EBUSY; + } + + /* All needed I/O pins and pin groups are free, allocate. */ + group_set = interfaces[ioif].groups; + while (NULL != (grp = get_group(group_set))) { + grp->used = 1; + grp->owner = ioif; + group_set = clear_group_from_set(group_set, grp); + } + + gens = genconfig_shadow; + gens_ii = gen_config_ii_shadow; + + set_gen_config = 1; + switch (ioif) + { + /* Begin Non-multiplexed interfaces */ + case if_eth: + /* fall through */ + case if_serial_0: + set_gen_config = 0; + break; + /* End Non-multiplexed interfaces */ + case if_serial_1: + set_gen_config_ii = 1; + SETS(gens_ii, R_GEN_CONFIG_II, sermode1, async); + break; + case if_serial_2: + SETS(gens, R_GEN_CONFIG, ser2, select); + break; + case if_serial_3: + SETS(gens, R_GEN_CONFIG, ser3, select); + set_gen_config_ii = 1; + SETS(gens_ii, R_GEN_CONFIG_II, sermode3, async); + break; + case if_sync_serial_1: + set_gen_config_ii = 1; + SETS(gens_ii, R_GEN_CONFIG_II, sermode1, sync); + break; + case if_sync_serial_3: + SETS(gens, R_GEN_CONFIG, ser3, select); + set_gen_config_ii = 1; + SETS(gens_ii, R_GEN_CONFIG_II, sermode3, sync); + break; + case if_shared_ram: + SETS(gens, R_GEN_CONFIG, mio, select); + break; + case if_shared_ram_w: + SETS(gens, R_GEN_CONFIG, mio_w, select); + break; + case if_par_0: + SETS(gens, R_GEN_CONFIG, par0, select); + break; + case if_par_1: + SETS(gens, R_GEN_CONFIG, par1, select); + break; + case if_par_w: + SETS(gens, R_GEN_CONFIG, par0, select); + SETS(gens, R_GEN_CONFIG, par_w, select); + break; + case if_scsi8_0: + SETS(gens, R_GEN_CONFIG, scsi0, select); + break; + case if_scsi8_1: + SETS(gens, R_GEN_CONFIG, scsi1, select); + break; + case if_scsi_w: + SETS(gens, R_GEN_CONFIG, scsi0, select); + SETS(gens, R_GEN_CONFIG, scsi0w, select); + break; + case if_ata: + SETS(gens, R_GEN_CONFIG, ata, select); + break; + case if_csp: + /* fall through */ + case if_i2c: + set_gen_config = 0; + break; + case if_usb_1: + SETS(gens, R_GEN_CONFIG, usb1, select); + break; + case if_usb_2: + SETS(gens, R_GEN_CONFIG, usb2, select); + break; + case if_gpio_grp_a: + /* GPIO groups are only accounted, don't do configuration changes. */ + /* fall through */ + case if_gpio_grp_b: + /* fall through */ + case if_gpio_grp_c: + /* fall through */ + case if_gpio_grp_d: + /* fall through */ + case if_gpio_grp_e: + /* fall through */ + case if_gpio_grp_f: + set_gen_config = 0; + break; + default: + panic("cris_request_io_interface: Bad interface %u submitted for %s\n", + ioif, + device_id); + } + + interfaces[ioif].used = 1; + interfaces[ioif].owner = (char*)device_id; + + if (set_gen_config) { + volatile int i; + genconfig_shadow = gens; + *R_GEN_CONFIG = genconfig_shadow; + /* Wait 12 cycles before doing any DMA command */ + for(i = 6; i > 0; i--) + nop(); + } + if (set_gen_config_ii) { + gen_config_ii_shadow = gens_ii; + *R_GEN_CONFIG_II = gen_config_ii_shadow; + } + + DBG(printk("GPIO pins: available before: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + gpio_in_pins, gpio_out_pins, gpio_pb_pins)); + DBG(printk("grabbing pins: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + interfaces[ioif].gpio_g_in, + interfaces[ioif].gpio_g_out, + interfaces[ioif].gpio_b)); + + gpio_in_pins &= ~interfaces[ioif].gpio_g_in; + gpio_out_pins &= ~interfaces[ioif].gpio_g_out; + gpio_pb_pins &= ~interfaces[ioif].gpio_b; + + DBG(printk("GPIO pins: available after: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + gpio_in_pins, gpio_out_pins, gpio_pb_pins)); + + local_irq_restore(flags); + + notify_watchers(); + + return 0; +} + + +void cris_free_io_interface(enum cris_io_interface ioif) +{ + struct if_group *grp; + unsigned char group_set; + unsigned long flags; + + (void)cris_io_interface_init(); + + if ((ioif >= if_max_interfaces) || (ioif < 0)) { + printk(KERN_CRIT "cris_free_io_interface: Bad interface %u\n", + ioif); + return; + } + local_irq_save(flags); + if (!interfaces[ioif].used) { + printk(KERN_CRIT "cris_free_io_interface: Freeing free interface %u\n", + ioif); + local_irq_restore(flags); + return; + } + group_set = interfaces[ioif].groups; + while (NULL != (grp = get_group(group_set))) { + if (grp->group == group_f) { + switch (ioif) + { + case if_sync_serial_1: + if ((grp->owner == if_sync_serial_1) && + interfaces[if_sync_serial_3].used) { + grp->owner = if_sync_serial_3; + } else + grp->used = 0; + break; + case if_sync_serial_3: + if ((grp->owner == if_sync_serial_3) && + interfaces[if_sync_serial_1].used) { + grp->owner = if_sync_serial_1; + } else + grp->used = 0; + break; + case if_scsi8_0: + if ((grp->owner == if_scsi8_0) && + interfaces[if_scsi8_1].used) { + grp->owner = if_scsi8_1; + } else + grp->used = 0; + break; + case if_scsi8_1: + if ((grp->owner == if_scsi8_1) && + interfaces[if_scsi8_0].used) { + grp->owner = if_scsi8_0; + } else + grp->used = 0; + break; + default: + grp->used = 0; + } + } else { + grp->used = 0; + } + group_set = clear_group_from_set(group_set, grp); + } + interfaces[ioif].used = 0; + interfaces[ioif].owner = NULL; + + DBG(printk("GPIO pins: available before: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + gpio_in_pins, gpio_out_pins, gpio_pb_pins)); + DBG(printk("freeing pins: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + interfaces[ioif].gpio_g_in, + interfaces[ioif].gpio_g_out, + interfaces[ioif].gpio_b)); + + gpio_in_pins |= interfaces[ioif].gpio_g_in; + gpio_out_pins |= interfaces[ioif].gpio_g_out; + gpio_pb_pins |= interfaces[ioif].gpio_b; + + DBG(printk("GPIO pins: available after: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + gpio_in_pins, gpio_out_pins, gpio_pb_pins)); + + local_irq_restore(flags); + + notify_watchers(); +} + +/* Create a bitmask from bit 0 (inclusive) to bit stop_bit + (non-inclusive). stop_bit == 0 returns 0x0 */ +static inline unsigned int create_mask(const unsigned stop_bit) +{ + /* Avoid overflow */ + if (stop_bit >= 32) { + return 0xffffffff; + } + return (1<<stop_bit)-1; +} + + +/* port can be 'a', 'b' or 'g' */ +int cris_io_interface_allocate_pins(const enum cris_io_interface ioif, + const char port, + const unsigned start_bit, + const unsigned stop_bit) +{ + unsigned int i; + unsigned int mask = 0; + unsigned int tmp_mask; + unsigned long int flags; + enum cris_io_interface *owners; + + (void)cris_io_interface_init(); + + DBG(printk("cris_io_interface_allocate_pins: if=%d port=%c start=%u stop=%u\n", + ioif, port, start_bit, stop_bit)); + + if (!((start_bit <= stop_bit) && + ((((port == 'a') || (port == 'b')) && (stop_bit < 8)) || + ((port == 'g') && (stop_bit < 32))))) { + return -EINVAL; + } + + mask = create_mask(stop_bit + 1); + tmp_mask = create_mask(start_bit); + mask &= ~tmp_mask; + + DBG(printk("cris_io_interface_allocate_pins: port=%c start=%u stop=%u mask=0x%08x\n", + port, start_bit, stop_bit, mask)); + + local_irq_save(flags); + + switch (port) { + case 'a': + if ((gpio_pa_pins & mask) != mask) { + local_irq_restore(flags); + return -EBUSY; + } + owners = gpio_pa_owners; + gpio_pa_pins &= ~mask; + break; + case 'b': + if ((gpio_pb_pins & mask) != mask) { + local_irq_restore(flags); + return -EBUSY; + } + owners = gpio_pb_owners; + gpio_pb_pins &= ~mask; + break; + case 'g': + if (((gpio_in_pins & mask) != mask) || + ((gpio_out_pins & mask) != mask)) { + local_irq_restore(flags); + return -EBUSY; + } + owners = gpio_pg_owners; + gpio_in_pins &= ~mask; + gpio_out_pins &= ~mask; + break; + default: + local_irq_restore(flags); + return -EINVAL; + } + + for (i = start_bit; i <= stop_bit; i++) { + owners[i] = ioif; + } + local_irq_restore(flags); + + notify_watchers(); + return 0; +} + + +/* port can be 'a', 'b' or 'g' */ +int cris_io_interface_free_pins(const enum cris_io_interface ioif, + const char port, + const unsigned start_bit, + const unsigned stop_bit) +{ + unsigned int i; + unsigned int mask = 0; + unsigned int tmp_mask; + unsigned long int flags; + enum cris_io_interface *owners; + + (void)cris_io_interface_init(); + + if (!((start_bit <= stop_bit) && + ((((port == 'a') || (port == 'b')) && (stop_bit < 8)) || + ((port == 'g') && (stop_bit < 32))))) { + return -EINVAL; + } + + mask = create_mask(stop_bit + 1); + tmp_mask = create_mask(start_bit); + mask &= ~tmp_mask; + + DBG(printk("cris_io_interface_free_pins: port=%c start=%u stop=%u mask=0x%08x\n", + port, start_bit, stop_bit, mask)); + + local_irq_save(flags); + + switch (port) { + case 'a': + if ((~gpio_pa_pins & mask) != mask) { + local_irq_restore(flags); + printk(KERN_CRIT "cris_io_interface_free_pins: Freeing free pins"); + } + owners = gpio_pa_owners; + break; + case 'b': + if ((~gpio_pb_pins & mask) != mask) { + local_irq_restore(flags); + printk(KERN_CRIT "cris_io_interface_free_pins: Freeing free pins"); + } + owners = gpio_pb_owners; + break; + case 'g': + if (((~gpio_in_pins & mask) != mask) || + ((~gpio_out_pins & mask) != mask)) { + local_irq_restore(flags); + printk(KERN_CRIT "cris_io_interface_free_pins: Freeing free pins"); + } + owners = gpio_pg_owners; + break; + default: + owners = NULL; /* Cannot happen. Shut up, gcc! */ + } + + for (i = start_bit; i <= stop_bit; i++) { + if (owners[i] != ioif) { + printk(KERN_CRIT "cris_io_interface_free_pins: Freeing unowned pins"); + } + } + + /* All was ok, change data. */ + switch (port) { + case 'a': + gpio_pa_pins |= mask; + break; + case 'b': + gpio_pb_pins |= mask; + break; + case 'g': + gpio_in_pins |= mask; + gpio_out_pins |= mask; + break; + } + + for (i = start_bit; i <= stop_bit; i++) { + owners[i] = if_unclaimed; + } + local_irq_restore(flags); + notify_watchers(); + + return 0; +} + + +int cris_io_interface_register_watcher(void (*notify)(const unsigned int gpio_in_available, + const unsigned int gpio_out_available, + const unsigned char pa_available, + const unsigned char pb_available)) +{ + struct watcher *w; + + (void)cris_io_interface_init(); + + if (NULL == notify) { + return -EINVAL; + } + w = kmalloc(sizeof(*w), GFP_KERNEL); + if (!w) { + return -ENOMEM; + } + w->notify = notify; + w->next = watchers; + watchers = w; + + w->notify((const unsigned int)gpio_in_pins, + (const unsigned int)gpio_out_pins, + (const unsigned char)gpio_pa_pins, + (const unsigned char)gpio_pb_pins); + + return 0; +} + +void cris_io_interface_delete_watcher(void (*notify)(const unsigned int gpio_in_available, + const unsigned int gpio_out_available, + const unsigned char pa_available, + const unsigned char pb_available)) +{ + struct watcher *w = watchers, *prev = NULL; + + (void)cris_io_interface_init(); + + while ((NULL != w) && (w->notify != notify)){ + prev = w; + w = w->next; + } + if (NULL != w) { + if (NULL != prev) { + prev->next = w->next; + } else { + watchers = w->next; + } + kfree(w); + return; + } + printk(KERN_WARNING "cris_io_interface_delete_watcher: Deleting unknown watcher 0x%p\n", notify); +} + + +static int cris_io_interface_init(void) +{ + static int first = 1; + int i; + + if (!first) { + return 0; + } + first = 0; + + for (i = 0; i<8; i++) { + gpio_pa_owners[i] = if_unclaimed; + gpio_pb_owners[i] = if_unclaimed; + gpio_pg_owners[i] = if_unclaimed; + } + for (; i<32; i++) { + gpio_pg_owners[i] = if_unclaimed; + } + return 0; +} + + +module_init(cris_io_interface_init); + + +EXPORT_SYMBOL(cris_request_io_interface); +EXPORT_SYMBOL(cris_free_io_interface); +EXPORT_SYMBOL(cris_io_interface_allocate_pins); +EXPORT_SYMBOL(cris_io_interface_free_pins); +EXPORT_SYMBOL(cris_io_interface_register_watcher); +EXPORT_SYMBOL(cris_io_interface_delete_watcher); diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c index b2f16d6fc871..4b368a122015 100644 --- a/arch/cris/arch-v10/kernel/irq.c +++ b/arch/cris/arch-v10/kernel/irq.c @@ -1,4 +1,4 @@ -/* $Id: irq.c,v 1.2 2004/06/09 05:30:27 starvik Exp $ +/* $Id: irq.c,v 1.4 2005/01/04 12:22:28 starvik Exp $ * * linux/arch/cris/kernel/irq.c * @@ -12,11 +12,13 @@ */ #include <asm/irq.h> +#include <linux/irq.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/config.h> -irqvectptr irq_shortcuts[NR_IRQS]; /* vector of shortcut jumps after the irq prologue */ +#define mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr)); +#define unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr)); /* don't use set_int_vector, it bypasses the linux interrupt handlers. it is * global just so that the kernel gdb can use it. @@ -102,41 +104,52 @@ static void (*interrupt[NR_IRQS])(void) = { IRQ31_interrupt }; -static void (*bad_interrupt[NR_IRQS])(void) = { - NULL, NULL, - NULL, bad_IRQ3_interrupt, - bad_IRQ4_interrupt, bad_IRQ5_interrupt, - bad_IRQ6_interrupt, bad_IRQ7_interrupt, - bad_IRQ8_interrupt, bad_IRQ9_interrupt, - bad_IRQ10_interrupt, bad_IRQ11_interrupt, - bad_IRQ12_interrupt, bad_IRQ13_interrupt, - NULL, NULL, - bad_IRQ16_interrupt, bad_IRQ17_interrupt, - bad_IRQ18_interrupt, bad_IRQ19_interrupt, - bad_IRQ20_interrupt, bad_IRQ21_interrupt, - bad_IRQ22_interrupt, bad_IRQ23_interrupt, - bad_IRQ24_interrupt, bad_IRQ25_interrupt, - NULL, NULL, NULL, NULL, NULL, - bad_IRQ31_interrupt -}; +static void enable_crisv10_irq(unsigned int irq); + +static unsigned int startup_crisv10_irq(unsigned int irq) +{ + enable_crisv10_irq(irq); + return 0; +} + +#define shutdown_crisv10_irq disable_crisv10_irq -void arch_setup_irq(int irq) +static void enable_crisv10_irq(unsigned int irq) { - set_int_vector(irq, interrupt[irq]); + unmask_irq(irq); } -void arch_free_irq(int irq) +static void disable_crisv10_irq(unsigned int irq) { - set_int_vector(irq, bad_interrupt[irq]); + mask_irq(irq); } +static void ack_crisv10_irq(unsigned int irq) +{ +} + +static void end_crisv10_irq(unsigned int irq) +{ +} + +static struct hw_interrupt_type crisv10_irq_type = { + .typename = "CRISv10", + .startup = startup_crisv10_irq, + .shutdown = shutdown_crisv10_irq, + .enable = enable_crisv10_irq, + .disable = disable_crisv10_irq, + .ack = ack_crisv10_irq, + .end = end_crisv10_irq, + .set_affinity = NULL +}; + void weird_irq(void); void system_call(void); /* from entry.S */ void do_sigtrap(void); /* from entry.S */ void gdb_handle_breakpoint(void); /* from entry.S */ /* init_IRQ() is called by start_kernel and is responsible for fixing IRQ masks and - setting the irq vector table to point to bad_interrupt ptrs. + setting the irq vector table. */ void __init @@ -154,14 +167,15 @@ init_IRQ(void) *R_VECT_MASK_CLR = 0xffffffff; - /* clear the shortcut entry points */ - - for(i = 0; i < NR_IRQS; i++) - irq_shortcuts[i] = NULL; - for (i = 0; i < 256; i++) etrax_irv->v[i] = weird_irq; + /* Initialize IRQ handler descriptiors. */ + for(i = 2; i < NR_IRQS; i++) { + irq_desc[i].handler = &crisv10_irq_type; + set_int_vector(i, interrupt[i]); + } + /* the entries in the break vector contain actual code to be executed by the associated break handler, rather than just a jump address. therefore we need to setup a default breakpoint handler @@ -170,10 +184,6 @@ init_IRQ(void) for (i = 0; i < 16; i++) set_break_vector(i, do_sigtrap); - /* set all etrax irq's to the bad handlers */ - for (i = 2; i < NR_IRQS; i++) - set_int_vector(i, bad_interrupt[i]); - /* except IRQ 15 which is the multiple-IRQ handler on Etrax100 */ set_int_vector(15, multiple_interrupt); diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c index 7d368c877ee9..b72e6a91a639 100644 --- a/arch/cris/arch-v10/kernel/kgdb.c +++ b/arch/cris/arch-v10/kernel/kgdb.c @@ -18,6 +18,10 @@ *! Jul 21 1999 Bjorn Wesen eLinux port *! *! $Log: kgdb.c,v $ +*! Revision 1.6 2005/01/14 10:12:17 starvik +*! KGDB on separate port. +*! Console fixes from 2.4. +*! *! Revision 1.5 2004/10/07 13:59:08 starvik *! Corrected call to set_int_vector *! @@ -71,7 +75,7 @@ *! *!--------------------------------------------------------------------------- *! -*! $Id: kgdb.c,v 1.5 2004/10/07 13:59:08 starvik Exp $ +*! $Id: kgdb.c,v 1.6 2005/01/14 10:12:17 starvik Exp $ *! *! (C) Copyright 1999, Axis Communications AB, LUND, SWEDEN *! @@ -225,6 +229,7 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/linkage.h> +#include <linux/reboot.h> #include <asm/setup.h> #include <asm/ptrace.h> @@ -1344,12 +1349,11 @@ handle_exception (int sigval) } } -/* The jump is to the address 0x00000002. Performs a complete re-start - from scratch. */ +/* Performs a complete re-start from scratch. */ static void kill_restart () { - __asm__ volatile ("jump 2"); + machine_restart(""); } /********************************** Breakpoint *******************************/ @@ -1506,6 +1510,11 @@ kgdb_handle_serial: bne goback nop + move.d [reg+0x5E], $r10 ; Get DCCR + btstq 8, $r10 ; Test the U-flag. + bmi goback + nop + ;; ;; Handle the communication ;; diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c index 87ff37790827..69e28b4057e8 100644 --- a/arch/cris/arch-v10/kernel/process.c +++ b/arch/cris/arch-v10/kernel/process.c @@ -1,4 +1,4 @@ -/* $Id: process.c,v 1.9 2004/10/19 13:07:37 starvik Exp $ +/* $Id: process.c,v 1.12 2004/12/27 11:18:32 starvik Exp $ * * linux/arch/cris/kernel/process.c * @@ -101,6 +101,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) regs.r11 = (unsigned long)fn; regs.r12 = (unsigned long)arg; regs.irp = (unsigned long)kernel_thread_helper; + regs.dccr = 1 << I_DCCR_BITNR; /* Ok, create the new process.. */ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); diff --git a/arch/cris/arch-v10/kernel/ptrace.c b/arch/cris/arch-v10/kernel/ptrace.c index 581ecabaae53..130dd214e41d 100644 --- a/arch/cris/arch-v10/kernel/ptrace.c +++ b/arch/cris/arch-v10/kernel/ptrace.c @@ -11,6 +11,7 @@ #include <linux/ptrace.h> #include <linux/user.h> #include <linux/signal.h> +#include <linux/security.h> #include <asm/uaccess.h> #include <asm/page.h> @@ -86,9 +87,13 @@ sys_ptrace(long request, long pid, long addr, long data) ret = -EPERM; if (request == PTRACE_TRACEME) { + /* are we already being traced? */ if (current->ptrace & PT_PTRACED) goto out; - + ret = security_ptrace(current->parent, current); + if (ret) + goto out; + /* set the ptrace bit in the process flags. */ current->ptrace |= PT_PTRACED; ret = 0; goto out; @@ -207,7 +212,7 @@ sys_ptrace(long request, long pid, long addr, long data) case PTRACE_KILL: ret = 0; - if (child->state == TASK_ZOMBIE) + if (child->exit_state == EXIT_ZOMBIE) break; child->exit_code = SIGKILL; diff --git a/arch/cris/arch-v10/kernel/shadows.c b/arch/cris/arch-v10/kernel/shadows.c index 561a890a8e4c..38fd44dfbc5b 100644 --- a/arch/cris/arch-v10/kernel/shadows.c +++ b/arch/cris/arch-v10/kernel/shadows.c @@ -1,4 +1,4 @@ -/* $Id: shadows.c,v 1.1 2001/12/17 13:59:27 bjornw Exp $ +/* $Id: shadows.c,v 1.2 2004/12/13 12:21:51 starvik Exp $ * * Various shadow registers. Defines for these are in include/asm-etrax100/io.h */ @@ -6,6 +6,7 @@ /* Shadows for internal Etrax-registers */ unsigned long genconfig_shadow; +unsigned long gen_config_ii_shadow; unsigned long port_g_data_shadow; unsigned char port_pa_dir_shadow; unsigned char port_pa_data_shadow; diff --git a/arch/cris/arch-v10/kernel/traps.c b/arch/cris/arch-v10/kernel/traps.c index da491f438a6e..34a27ea2052d 100644 --- a/arch/cris/arch-v10/kernel/traps.c +++ b/arch/cris/arch-v10/kernel/traps.c @@ -1,4 +1,4 @@ -/* $Id: traps.c,v 1.2 2003/07/04 08:27:41 starvik Exp $ +/* $Id: traps.c,v 1.4 2005/04/24 18:47:55 starvik Exp $ * * linux/arch/cris/arch-v10/traps.c * @@ -16,6 +16,8 @@ #include <asm/uaccess.h> #include <asm/arch/sv_addr_ag.h> +extern int raw_printk(const char *fmt, ...); + void show_registers(struct pt_regs * regs) { @@ -26,18 +28,18 @@ show_registers(struct pt_regs * regs) register. */ unsigned long usp = rdusp(); - printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n", + raw_printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n", regs->irp, regs->srp, regs->dccr, usp, regs->mof ); - printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", + raw_printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", regs->r0, regs->r1, regs->r2, regs->r3); - printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", + raw_printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", regs->r4, regs->r5, regs->r6, regs->r7); - printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", + raw_printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", regs->r8, regs->r9, regs->r10, regs->r11); - printk("r12: %08lx r13: %08lx oR10: %08lx\n", - regs->r12, regs->r13, regs->orig_r10); - printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE); - printk("Process %s (pid: %d, stackpage=%08lx)\n", + raw_printk("r12: %08lx r13: %08lx oR10: %08lx sp: %08lx\n", + regs->r12, regs->r13, regs->orig_r10, regs); + raw_printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE); + raw_printk("Process %s (pid: %d, stackpage=%08lx)\n", current->comm, current->pid, (unsigned long)current); /* @@ -53,7 +55,7 @@ show_registers(struct pt_regs * regs) if (usp != 0) show_stack (NULL, NULL); - printk("\nCode: "); + raw_printk("\nCode: "); if(regs->irp < PAGE_OFFSET) goto bad; @@ -70,16 +72,16 @@ show_registers(struct pt_regs * regs) unsigned char c; if(__get_user(c, &((unsigned char*)regs->irp)[i])) { bad: - printk(" Bad IP value."); + raw_printk(" Bad IP value."); break; } if (i == 0) - printk("(%02x) ", c); + raw_printk("(%02x) ", c); else - printk("%02x ", c); + raw_printk("%02x ", c); } - printk("\n"); + raw_printk("\n"); } } @@ -121,7 +123,7 @@ die_if_kernel(const char * str, struct pt_regs * regs, long err) stop_watchdog(); #endif - printk("%s: %04lx\n", str, err & 0xffff); + raw_printk("%s: %04lx\n", str, err & 0xffff); show_registers(regs); @@ -130,3 +132,8 @@ die_if_kernel(const char * str, struct pt_regs * regs, long err) #endif do_exit(SIGSEGV); } + +void arch_enable_nmi(void) +{ + asm volatile("setf m"); +} diff --git a/arch/cris/arch-v10/mm/fault.c b/arch/cris/arch-v10/mm/fault.c index 6805cdb25a53..fe2615022b97 100644 --- a/arch/cris/arch-v10/mm/fault.c +++ b/arch/cris/arch-v10/mm/fault.c @@ -14,6 +14,7 @@ #include <asm/uaccess.h> #include <asm/pgtable.h> #include <asm/arch/svinto.h> +#include <asm/mmu_context.h> /* debug of low-level TLB reload */ #undef DEBUG @@ -24,8 +25,6 @@ #define D(x) #endif -extern volatile pgd_t *current_pgd; - extern const struct exception_table_entry *search_exception_tables(unsigned long addr); @@ -46,7 +45,7 @@ handle_mmu_bus_fault(struct pt_regs *regs) int page_id; int acc, inv; #endif - pgd_t* pgd = (pgd_t*)current_pgd; + pgd_t* pgd = (pgd_t*)per_cpu(current_pgd, smp_processor_id()); pmd_t *pmd; pte_t pte; int miss, we, writeac; @@ -94,24 +93,3 @@ handle_mmu_bus_fault(struct pt_regs *regs) *R_TLB_LO = pte_val(pte); local_irq_restore(flags); } - -/* Called from arch/cris/mm/fault.c to find fixup code. */ -int -find_fixup_code(struct pt_regs *regs) -{ - const struct exception_table_entry *fixup; - - if ((fixup = search_exception_tables(regs->irp)) != 0) { - /* Adjust the instruction pointer in the stackframe. */ - regs->irp = fixup->fixup; - - /* - * Don't return by restoring the CPU state, so switch - * frame-type. - */ - regs->frametype = CRIS_FRAME_NORMAL; - return 1; - } - - return 0; -} diff --git a/arch/cris/arch-v10/mm/init.c b/arch/cris/arch-v10/mm/init.c index a9f975a9cfb5..ff3481e76dd4 100644 --- a/arch/cris/arch-v10/mm/init.c +++ b/arch/cris/arch-v10/mm/init.c @@ -42,7 +42,7 @@ paging_init(void) * switch_mm) */ - current_pgd = init_mm.pgd; + per_cpu(current_pgd, smp_processor_id()) = init_mm.pgd; /* initialise the TLB (tlb.c) */ diff --git a/arch/cris/arch-v10/mm/tlb.c b/arch/cris/arch-v10/mm/tlb.c index 9d06125ff5a2..70a5523eff78 100644 --- a/arch/cris/arch-v10/mm/tlb.c +++ b/arch/cris/arch-v10/mm/tlb.c @@ -139,53 +139,6 @@ flush_tlb_page(struct vm_area_struct *vma, local_irq_restore(flags); } -/* invalidate a page range */ - -void -flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, - unsigned long end) -{ - struct mm_struct *mm = vma->vm_mm; - int page_id = mm->context.page_id; - int i; - unsigned long flags; - - D(printk("tlb: flush range %p<->%p in context %d (%p)\n", - start, end, page_id, mm)); - - if(page_id == NO_CONTEXT) - return; - - start &= PAGE_MASK; /* probably not necessary */ - end &= PAGE_MASK; /* dito */ - - /* invalidate those TLB entries that match both the mm context - * and the virtual address range - */ - - local_save_flags(flags); - local_irq_disable(); - for(i = 0; i < NUM_TLB_ENTRIES; i++) { - unsigned long tlb_hi, vpn; - *R_TLB_SELECT = IO_FIELD(R_TLB_SELECT, index, i); - tlb_hi = *R_TLB_HI; - vpn = tlb_hi & PAGE_MASK; - if (IO_EXTRACT(R_TLB_HI, page_id, tlb_hi) == page_id && - vpn >= start && vpn < end) { - *R_TLB_HI = ( IO_FIELD(R_TLB_HI, page_id, INVALID_PAGEID ) | - IO_FIELD(R_TLB_HI, vpn, i & 0xf ) ); - - *R_TLB_LO = ( IO_STATE(R_TLB_LO, global,no ) | - IO_STATE(R_TLB_LO, valid, no ) | - IO_STATE(R_TLB_LO, kernel,no ) | - IO_STATE(R_TLB_LO, we, no ) | - IO_FIELD(R_TLB_LO, pfn, 0 ) ); - } - } - local_irq_restore(flags); -} - /* dump the entire TLB for debug purposes */ #if 0 @@ -237,7 +190,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, * the pgd. */ - current_pgd = next->pgd; + per_cpu(current_pgd, smp_processor_id()) = next->pgd; /* switch context in the MMU */ diff --git a/arch/cris/arch-v32/Kconfig b/arch/cris/arch-v32/Kconfig new file mode 100644 index 000000000000..22f0ddc04c50 --- /dev/null +++ b/arch/cris/arch-v32/Kconfig @@ -0,0 +1,296 @@ +config ETRAX_DRAM_VIRTUAL_BASE + hex + depends on ETRAX_ARCH_V32 + default "c0000000" + +config ETRAX_LED1G + string "First green LED bit" + depends on ETRAX_ARCH_V32 + default "PA3" + help + Bit to use for the first green LED (network LED). + Most Axis products use bit A3 here. + +config ETRAX_LED1R + string "First red LED bit" + depends on ETRAX_ARCH_V32 + default "PA4" + help + Bit to use for the first red LED (network LED). + Most Axis products use bit A4 here. + +config ETRAX_LED2G + string "Second green LED bit" + depends on ETRAX_ARCH_V32 + default "PA5" + help + Bit to use for the first green LED (status LED). + Most Axis products use bit A5 here. + +config ETRAX_LED2R + string "Second red LED bit" + depends on ETRAX_ARCH_V32 + default "PA6" + help + Bit to use for the first red LED (network LED). + Most Axis products use bit A6 here. + +config ETRAX_LED3G + string "Third green LED bit" + depends on ETRAX_ARCH_V32 + default "PA7" + help + Bit to use for the first green LED (drive/power LED). + Most Axis products use bit A7 here. + +config ETRAX_LED3R + string "Third red LED bit" + depends on ETRAX_ARCH_V32 + default "PA7" + help + Bit to use for the first red LED (drive/power LED). + Most Axis products use bit A7 here. + +choice + prompt "Product debug-port" + depends on ETRAX_ARCH_V32 + default ETRAX_DEBUG_PORT0 + +config ETRAX_DEBUG_PORT0 + bool "Serial-0" + help + Choose a serial port for the ETRAX debug console. Default to + port 0. + +config ETRAX_DEBUG_PORT1 + bool "Serial-1" + help + Use serial port 1 for the console. + +config ETRAX_DEBUG_PORT2 + bool "Serial-2" + help + Use serial port 2 for the console. + +config ETRAX_DEBUG_PORT3 + bool "Serial-3" + help + Use serial port 3 for the console. + +config ETRAX_DEBUG_PORT_NULL + bool "disabled" + help + Disable serial-port debugging. + +endchoice + +choice + prompt "Kernel GDB port" + depends on ETRAX_KGDB + default ETRAX_KGDB_PORT0 + help + Choose a serial port for kernel debugging. NOTE: This port should + not be enabled under Drivers for built-in interfaces (as it has its + own initialization code) and should not be the same as the debug port. + +config ETRAX_KGDB_PORT0 + bool "Serial-0" + help + Use serial port 0 for kernel debugging. + +config ETRAX_KGDB_PORT1 + bool "Serial-1" + help + Use serial port 1 for kernel debugging. + +config ETRAX_KGDB_PORT2 + bool "Serial-2" + help + Use serial port 2 for kernel debugging. + +config ETRAX_KGDB_PORT3 + bool "Serial-3" + help + Use serial port 3 for kernel debugging. + +endchoice + +config ETRAX_MEM_GRP1_CONFIG + hex "MEM_GRP1_CONFIG" + depends on ETRAX_ARCH_V32 + default "4044a" + help + Waitstates for flash. The default value is suitable for the + standard flashes used in axis products (120 ns). + +config ETRAX_MEM_GRP2_CONFIG + hex "MEM_GRP2_CONFIG" + depends on ETRAX_ARCH_V32 + default "0" + help + Waitstates for SRAM. 0 is a good choice for most Axis products. + +config ETRAX_MEM_GRP3_CONFIG + hex "MEM_GRP3_CONFIG" + depends on ETRAX_ARCH_V32 + default "0" + help + Waitstates for CSP0-3. 0 is a good choice for most Axis products. + It may need to be changed if external devices such as extra + register-mapped LEDs are used. + +config ETRAX_MEM_GRP4_CONFIG + hex "MEM_GRP4_CONFIG" + depends on ETRAX_ARCH_V32 + default "0" + help + Waitstates for CSP4-6. 0 is a good choice for most Axis products. + +config ETRAX_SDRAM_GRP0_CONFIG + hex "SDRAM_GRP0_CONFIG" + depends on ETRAX_ARCH_V32 + default "336" + help + SDRAM configuration for group 0. The value depends on the + hardware configuration. The default value is suitable + for 32 MB organized as two 16 bits chips (e.g. Axis + part number 18550) connected as one 32 bit device (i.e. in + the same group). + +config ETRAX_SDRAM_GRP1_CONFIG + hex "SDRAM_GRP1_CONFIG" + depends on ETRAX_ARCH_V32 + default "0" + help + SDRAM configuration for group 1. The defult value is 0 + because group 1 is not used in the default configuration, + described in the help for SDRAM_GRP0_CONFIG. + +config ETRAX_SDRAM_TIMING + hex "SDRAM_TIMING" + depends on ETRAX_ARCH_V32 + default "104a" + help + SDRAM timing parameters. The default value is ok for + most hardwares but large SDRAMs may require a faster + refresh (a.k.a 8K refresh). The default value implies + 100MHz clock and SDR mode. + +config ETRAX_SDRAM_COMMAND + hex "SDRAM_COMMAND" + depends on ETRAX_ARCH_V32 + default "0" + help + SDRAM command. Should be 0 unless you really know what + you are doing (may be != 0 for unusual address line + mappings such as in a MCM).. + +config ETRAX_DEF_GIO_PA_OE + hex "GIO_PA_OE" + depends on ETRAX_ARCH_V32 + default "1c" + help + Configures the direction of general port A bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PA_OUT + hex "GIO_PA_OUT" + depends on ETRAX_ARCH_V32 + default "00" + help + Configures the initial data for the general port A bits. Most + products should use 00 here. + +config ETRAX_DEF_GIO_PB_OE + hex "GIO_PB_OE" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the direction of general port B bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PB_OUT + hex "GIO_PB_OUT" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the initial data for the general port B bits. Most + products should use 00000 here. + +config ETRAX_DEF_GIO_PC_OE + hex "GIO_PC_OE" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the direction of general port C bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PC_OUT + hex "GIO_PC_OUT" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the initial data for the general port C bits. Most + products should use 00000 here. + +config ETRAX_DEF_GIO_PD_OE + hex "GIO_PD_OE" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the direction of general port D bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PD_OUT + hex "GIO_PD_OUT" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the initial data for the general port D bits. Most + products should use 00000 here. + +config ETRAX_DEF_GIO_PE_OE + hex "GIO_PE_OE" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the direction of general port E bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_GIO_PE_OUT + hex "GIO_PE_OUT" + depends on ETRAX_ARCH_V32 + default "00000" + help + Configures the initial data for the general port E bits. Most + products should use 00000 here. diff --git a/arch/cris/arch-v32/boot/Makefile b/arch/cris/arch-v32/boot/Makefile new file mode 100644 index 000000000000..26f293ab9617 --- /dev/null +++ b/arch/cris/arch-v32/boot/Makefile @@ -0,0 +1,14 @@ +# +# arch/cris/arch-v32/boot/Makefile +# +target = $(target_boot_dir) +src = $(src_boot_dir) + +zImage: compressed/vmlinuz + +compressed/vmlinuz: $(objtree)/vmlinux + @$(MAKE) -f $(src)/compressed/Makefile $(objtree)/vmlinuz + +clean: + rm -f zImage tools/build compressed/vmlinux.out + @$(MAKE) -f $(src)/compressed/Makefile clean diff --git a/arch/cris/arch-v32/boot/compressed/Makefile b/arch/cris/arch-v32/boot/compressed/Makefile new file mode 100644 index 000000000000..9f77eda914ba --- /dev/null +++ b/arch/cris/arch-v32/boot/compressed/Makefile @@ -0,0 +1,41 @@ +# +# lx25/arch/cris/arch-v32/boot/compressed/Makefile +# +# create a compressed vmlinux image from the original vmlinux files and romfs +# + +target = $(target_compressed_dir) +src = $(src_compressed_dir) + +CC = gcc-cris -mlinux -march=v32 -I $(TOPDIR)/include +CFLAGS = -O2 +LD = gcc-cris -mlinux -march=v32 -nostdlib +OBJCOPY = objcopy-cris +OBJCOPYFLAGS = -O binary --remove-section=.bss +OBJECTS = $(target)/head.o $(target)/misc.o + +# files to compress +SYSTEM = $(objtree)/vmlinux.bin + +all: vmlinuz + +$(target)/decompress.bin: $(OBJECTS) + $(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS) + $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin + +$(objtree)/vmlinuz: $(target) piggy.img $(target)/decompress.bin + cat $(target)/decompress.bin piggy.img > $(objtree)/vmlinuz + rm -f piggy.img + cp $(objtree)/vmlinuz $(src) + +$(target)/head.o: $(src)/head.S + $(CC) -D__ASSEMBLY__ -c $< -o $@ + +# gzip the kernel image + +piggy.img: $(SYSTEM) + cat $(SYSTEM) | gzip -f -9 > piggy.img + +clean: + rm -f piggy.img $(objtree)/vmlinuz vmlinuz.o decompress.o decompress.bin $(OBJECTS) + diff --git a/arch/cris/arch-v32/boot/compressed/README b/arch/cris/arch-v32/boot/compressed/README new file mode 100644 index 000000000000..e33691d15c57 --- /dev/null +++ b/arch/cris/arch-v32/boot/compressed/README @@ -0,0 +1,25 @@ +Creation of the self-extracting compressed kernel image (vmlinuz) +----------------------------------------------------------------- +$Id: README,v 1.1 2003/08/21 09:37:03 johana Exp $ + +This can be slightly confusing because it's a process with many steps. + +The kernel object built by the arch/etrax100/Makefile, vmlinux, is split +by that makefile into text and data binary files, vmlinux.text and +vmlinux.data. + +Those files together with a ROM filesystem can be catted together and +burned into a flash or executed directly at the DRAM origin. + +They can also be catted together and compressed with gzip, which is what +happens in this makefile. Together they make up piggy.img. + +The decompressor is built into the file decompress.o. It is turned into +the binary file decompress.bin, which is catted together with piggy.img +into the file vmlinuz. It can be executed in an arbitrary place in flash. + +Be careful - it assumes some things about free locations in DRAM. It +assumes the DRAM starts at 0x40000000 and that it is at least 8 MB, +so it puts its code at 0x40700000, and initial stack at 0x40800000. + +-Bjorn diff --git a/arch/cris/arch-v32/boot/compressed/decompress.ld b/arch/cris/arch-v32/boot/compressed/decompress.ld new file mode 100644 index 000000000000..3c837feca3ac --- /dev/null +++ b/arch/cris/arch-v32/boot/compressed/decompress.ld @@ -0,0 +1,30 @@ +/*#OUTPUT_FORMAT(elf32-us-cris) */ +OUTPUT_ARCH (crisv32) + +MEMORY + { + dram : ORIGIN = 0x40700000, + LENGTH = 0x00100000 + } + +SECTIONS +{ + .text : + { + _stext = . ; + *(.text) + *(.rodata) + *(.rodata.*) + _etext = . ; + } > dram + .data : + { + *(.data) + _edata = . ; + } > dram + .bss : + { + *(.bss) + _end = ALIGN( 0x10 ) ; + } > dram +} diff --git a/arch/cris/arch-v32/boot/compressed/head.S b/arch/cris/arch-v32/boot/compressed/head.S new file mode 100644 index 000000000000..0c55b83b8287 --- /dev/null +++ b/arch/cris/arch-v32/boot/compressed/head.S @@ -0,0 +1,193 @@ +/* + * Code that sets up the DRAM registers, calls the + * decompressor to unpack the piggybacked kernel, and jumps. + * + * Copyright (C) 1999 - 2003, Axis Communications AB + */ + +#include <linux/config.h> +#define ASSEMBLER_MACROS_ONLY +#include <asm/arch/hwregs/asm/reg_map_asm.h> +#include <asm/arch/hwregs/asm/gio_defs_asm.h> +#include <asm/arch/hwregs/asm/config_defs_asm.h> + +#define RAM_INIT_MAGIC 0x56902387 +#define COMMAND_LINE_MAGIC 0x87109563 + + ;; Exported symbols + + .globl input_data + + .text +start: + di + + ;; Start clocks for used blocks. + move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1 + move.d [$r1], $r0 + or.d REG_STATE(config, rw_clk_ctrl, cpu, yes) | \ + REG_STATE(config, rw_clk_ctrl, bif, yes) | \ + REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0 + move.d $r0, [$r1] + + ;; If booting from NAND flash we first have to copy some + ;; data from NAND flash to internal RAM to get the code + ;; that initializes the SDRAM. Lets copy 20 KB. This + ;; code executes at 0x38010000 if booting from NAND and + ;; we are guaranted that at least 0x200 bytes are good so + ;; lets start from there. The first 8192 bytes in the nand + ;; flash is spliced with zeroes and is thus 16384 bytes. + move.d 0x38010200, $r10 + move.d 0x14200, $r11 ; Start offset in NAND flash 0x10200 + 16384 + move.d 0x5000, $r12 ; Length of copy + + ;; Before this code the tools add a partitiontable so the PC + ;; has an offset from the linked address. +offset1: + lapcq ., $r13 ; get PC + add.d first_copy_complete-offset1, $r13 + +#include "../../lib/nand_init.S" + +first_copy_complete: + ;; Initialze the DRAM registers. + cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized? + beq dram_init_finished + nop + +#include "../../lib/dram_init.S" + +dram_init_finished: + lapcq ., $r13 ; get PC + add.d second_copy_complete-dram_init_finished, $r13 + + move.d REG_ADDR(config, regi_config, r_bootsel), $r0 + move.d [$r0], $r0 + and.d REG_MASK(config, r_bootsel, boot_mode), $r0 + cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 + bne second_copy_complete ; No NAND boot + nop + + ;; Copy 2MB from NAND flash to SDRAM (at 2-4MB into the SDRAM) + move.d 0x40204000, $r10 + move.d 0x8000, $r11 + move.d 0x200000, $r12 + ba copy_nand_to_ram + nop +second_copy_complete: + + ;; Initiate the PA port. + move.d CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PA_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r1 + move.d $r0, [$r1] + + ;; Setup the stack to a suitably high address. + ;; We assume 8 MB is the minimum DRAM and put + ;; the SP at the top for now. + + move.d 0x40800000, $sp + + ;; Figure out where the compressed piggyback image is + ;; in the flash (since we wont try to copy it to DRAM + ;; before unpacking). It is at _edata, but in flash. + ;; Use (_edata - herami) as offset to the current PC. + + move.d REG_ADDR(config, regi_config, r_bootsel), $r0 + move.d [$r0], $r0 + and.d REG_MASK(config, r_bootsel, boot_mode), $r0 + cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 + beq hereami2 + nop +hereami: + lapcq ., $r5 ; get PC + and.d 0x7fffffff, $r5 ; strip any non-cache bit + move.d $r5, $r0 ; save for later - flash address of 'herami' + add.d _edata, $r5 + sub.d hereami, $r5 ; r5 = flash address of '_edata' + move.d hereami, $r1 ; destination + ba 2f + nop +hereami2: + lapcq ., $r5 ; get PC + and.d 0x00ffffff, $r5 ; strip any non-cache bit + move.d $r5, $r6 + or.d 0x40200000, $r6 + move.d $r6, $r0 ; save for later - flash address of 'herami' + add.d _edata, $r5 + sub.d hereami2, $r5 ; r5 = flash address of '_edata' + add.d 0x40200000, $r5 + move.d hereami2, $r1 ; destination +2: + ;; Copy text+data to DRAM + + move.d _edata, $r2 ; end destination +1: move.w [$r0+], $r3 + move.w $r3, [$r1+] + cmp.d $r2, $r1 + bcs 1b + nop + + move.d input_data, $r0 ; for the decompressor + move.d $r5, [$r0] ; for the decompressor + + ;; Clear the decompressors BSS (between _edata and _end) + + moveq 0, $r0 + move.d _edata, $r1 + move.d _end, $r2 +1: move.w $r0, [$r1+] + cmp.d $r2, $r1 + bcs 1b + nop + + ;; Save command line magic and address. + move.d _cmd_line_magic, $r12 + move.d $r10, [$r12] + move.d _cmd_line_addr, $r12 + move.d $r11, [$r12] + + ;; Do the decompression and save compressed size in _inptr + + jsr decompress_kernel + nop + + ;; Restore command line magic and address. + move.d _cmd_line_magic, $r10 + move.d [$r10], $r10 + move.d _cmd_line_addr, $r11 + move.d [$r11], $r11 + + ;; Put start address of root partition in r9 so the kernel can use it + ;; when mounting from flash + move.d input_data, $r0 + move.d [$r0], $r9 ; flash address of compressed kernel + move.d inptr, $r0 + add.d [$r0], $r9 ; size of compressed kernel + cmp.d 0x40200000, $r9 + blo enter_kernel + nop + sub.d 0x40200000, $r9 + add.d 0x4000, $r9 + +enter_kernel: + ;; Enter the decompressed kernel + move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized + jump 0x40004000 ; kernel is linked to this address + nop + + .data + +input_data: + .dword 0 ; used by the decompressor +_cmd_line_magic: + .dword 0 +_cmd_line_addr: + .dword 0 +is_nand_boot: + .dword 0 + +#include "../../lib/hw_settings.S" diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/arch-v32/boot/compressed/misc.c new file mode 100644 index 000000000000..54644238ed59 --- /dev/null +++ b/arch/cris/arch-v32/boot/compressed/misc.c @@ -0,0 +1,318 @@ +/* + * misc.c + * + * $Id: misc.c,v 1.8 2005/04/24 18:34:29 starvik Exp $ + * + * This is a collection of several routines from gzip-1.0.3 + * adapted for Linux. + * + * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 + * puts by Nick Holloway 1993, better puts by Martin Mares 1995 + * adoptation for Linux/CRIS Axis Communications AB, 1999 + * + */ + +/* where the piggybacked kernel image expects itself to live. + * it is the same address we use when we network load an uncompressed + * image into DRAM, and it is the address the kernel is linked to live + * at by vmlinux.lds.S + */ + +#define KERNEL_LOAD_ADR 0x40004000 + +#include <linux/config.h> + +#include <linux/types.h> +#include <asm/arch/hwregs/reg_rdwr.h> +#include <asm/arch/hwregs/reg_map.h> +#include <asm/arch/hwregs/ser_defs.h> + +/* + * gzip declarations + */ + +#define OF(args) args +#define STATIC static + +void* memset(void* s, int c, size_t n); +void* memcpy(void* __dest, __const void* __src, + size_t __n); + +#define memzero(s, n) memset ((s), 0, (n)) + + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + +#define WSIZE 0x8000 /* Window size must be at least 32k, */ + /* and a power of two */ + +static uch *inbuf; /* input buffer */ +static uch window[WSIZE]; /* Sliding window buffer */ + +unsigned inptr = 0; /* index of next byte to be processed in inbuf + * After decompression it will contain the + * compressed size, and head.S will read it. + */ + +static unsigned outcnt = 0; /* bytes in output buffer */ + +/* gzip flag byte */ +#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ +#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ +#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ +#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ +#define COMMENT 0x10 /* bit 4 set: file comment present */ +#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ +#define RESERVED 0xC0 /* bit 6,7: reserved */ + +#define get_byte() inbuf[inptr++] + +/* Diagnostic functions */ +#ifdef DEBUG +# define Assert(cond,msg) {if(!(cond)) error(msg);} +# define Trace(x) fprintf x +# define Tracev(x) {if (verbose) fprintf x ;} +# define Tracevv(x) {if (verbose>1) fprintf x ;} +# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} +# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + +static int fill_inbuf(void); +static void flush_window(void); +static void error(char *m); +static void gzip_mark(void **); +static void gzip_release(void **); + +extern char *input_data; /* lives in head.S */ + +static long bytes_out = 0; +static uch *output_data; +static unsigned long output_ptr = 0; + +static void *malloc(int size); +static void free(void *where); +static void error(char *m); +static void gzip_mark(void **); +static void gzip_release(void **); + +static void puts(const char *); + +/* the "heap" is put directly after the BSS ends, at end */ + +extern int _end; +static long free_mem_ptr = (long)&_end; + +#include "../../../../../lib/inflate.c" + +static void *malloc(int size) +{ + void *p; + + if (size <0) error("Malloc error"); + + free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ + + p = (void *)free_mem_ptr; + free_mem_ptr += size; + + return p; +} + +static void free(void *where) +{ /* Don't care */ +} + +static void gzip_mark(void **ptr) +{ + *ptr = (void *) free_mem_ptr; +} + +static void gzip_release(void **ptr) +{ + free_mem_ptr = (long) *ptr; +} + +/* decompressor info and error messages to serial console */ + +static inline void +serout(const char *s, reg_scope_instances regi_ser) +{ + reg_ser_rs_stat_din rs; + reg_ser_rw_dout dout = {.data = *s}; + + do { + rs = REG_RD(ser, regi_ser, rs_stat_din); + } + while (!rs.tr_rdy);/* Wait for tranceiver. */ + + REG_WR(ser, regi_ser, rw_dout, dout); +} + +static void +puts(const char *s) +{ +#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL + while (*s) { +#ifdef CONFIG_ETRAX_DEBUG_PORT0 + serout(s, regi_ser0); +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT1 + serout(s, regi_ser1); +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT2 + serout(s, regi_ser2); +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT3 + serout(s, regi_ser3); +#endif + *s++; + } +/* CONFIG_ETRAX_DEBUG_PORT_NULL */ +#endif +} + +void* +memset(void* s, int c, size_t n) +{ + int i; + char *ss = (char*)s; + + for (i=0;i<n;i++) ss[i] = c; +} + +void* +memcpy(void* __dest, __const void* __src, + size_t __n) +{ + int i; + char *d = (char *)__dest, *s = (char *)__src; + + for (i=0;i<__n;i++) d[i] = s[i]; +} + +/* =========================================================================== + * Write the output window window[0..outcnt-1] and update crc and bytes_out. + * (Used for the decompressed data only.) + */ + +static void +flush_window() +{ + ulg c = crc; /* temporary variable */ + unsigned n; + uch *in, *out, ch; + + in = window; + out = &output_data[output_ptr]; + for (n = 0; n < outcnt; n++) { + ch = *out++ = *in++; + c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); + } + crc = c; + bytes_out += (ulg)outcnt; + output_ptr += (ulg)outcnt; + outcnt = 0; +} + +static void +error(char *x) +{ + puts("\n\n"); + puts(x); + puts("\n\n -- System halted\n"); + + while(1); /* Halt */ +} + +void +setup_normal_output_buffer() +{ + output_data = (char *)KERNEL_LOAD_ADR; +} + +static inline void +serial_setup(reg_scope_instances regi_ser) +{ + reg_ser_rw_xoff xoff; + reg_ser_rw_tr_ctrl tr_ctrl; + reg_ser_rw_rec_ctrl rec_ctrl; + reg_ser_rw_tr_baud_div tr_baud; + reg_ser_rw_rec_baud_div rec_baud; + + /* Turn off XOFF. */ + xoff = REG_RD(ser, regi_ser, rw_xoff); + + xoff.chr = 0; + xoff.automatic = regk_ser_no; + + REG_WR(ser, regi_ser, rw_xoff, xoff); + + /* Set baudrate and stopbits. */ + tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); + rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); + tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div); + rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div); + + tr_ctrl.stop_bits = 1; /* 2 stop bits. */ + + /* + * The baudrate setup is a bit fishy, but in the end the tranceiver is + * set to 4800 and the receiver to 115200. The magic value is + * 29.493 MHz. + */ + tr_ctrl.base_freq = regk_ser_f29_493; + rec_ctrl.base_freq = regk_ser_f29_493; + tr_baud.div = (29493000 / 8) / 4800; + rec_baud.div = (29493000 / 8) / 115200; + + REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); + REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud); + REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); + REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud); +} + +void +decompress_kernel() +{ + char revision; + + /* input_data is set in head.S */ + inbuf = input_data; + +#ifdef CONFIG_ETRAX_DEBUG_PORT0 + serial_setup(regi_ser0); +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT1 + serial_setup(regi_ser1); +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT2 + serial_setup(regi_ser2); +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT3 + serial_setup(regi_ser3); +#endif + + setup_normal_output_buffer(); + + makecrc(); + + __asm__ volatile ("move $vr,%0" : "=rm" (revision)); + if (revision < 32) + { + puts("You need an ETRAX FS to run Linux 2.6/crisv32.\n"); + while(1); + } + + puts("Uncompressing Linux...\n"); + gunzip(); + puts("Done. Now booting the kernel.\n"); +} diff --git a/arch/cris/arch-v32/boot/rescue/Makefile b/arch/cris/arch-v32/boot/rescue/Makefile new file mode 100644 index 000000000000..f668a8198724 --- /dev/null +++ b/arch/cris/arch-v32/boot/rescue/Makefile @@ -0,0 +1,36 @@ +# +# Makefile for rescue code +# +target = $(target_rescue_dir) +src = $(src_rescue_dir) + +CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE) +CFLAGS = -O2 +LD = gcc-cris -mlinux -march=v32 -nostdlib +OBJCOPY = objcopy-cris +OBJCOPYFLAGS = -O binary --remove-section=.bss + +all: $(target)/rescue.bin + +rescue: rescue.bin + # do nothing + +$(target)/rescue.bin: $(target) $(target)/head.o + $(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o + $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin + cp -p $(target)/rescue.bin $(objtree) + +$(target): + mkdir -p $(target) + +$(target)/head.o: $(src)/head.S + $(CC) -D__ASSEMBLY__ -c $< -o $*.o + +clean: + rm -f $(target)/*.o $(target)/*.bin + +fastdep: + +modules: + +modules-install: diff --git a/arch/cris/arch-v32/boot/rescue/head.S b/arch/cris/arch-v32/boot/rescue/head.S new file mode 100644 index 000000000000..61ede5f30f99 --- /dev/null +++ b/arch/cris/arch-v32/boot/rescue/head.S @@ -0,0 +1,39 @@ +/* $Id: head.S,v 1.4 2004/11/01 16:10:28 starvik Exp $ + * + * This used to be the rescue code but now that is handled by the + * RedBoot based RFL instead. Nothing to see here, move along. + */ + +#include <linux/config.h> +#include <asm/arch/hwregs/reg_map_asm.h> +#include <asm/arch/hwregs/config_defs_asm.h> + + .text + + ;; Start clocks for used blocks. + move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1 + move.d [$r1], $r0 + or.d REG_STATE(config, rw_clk_ctrl, cpu, yes) | \ + REG_STATE(config, rw_clk_ctrl, bif, yes) | \ + REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0 + move.d $r0, [$r1] + + ;; Copy 68KB NAND flash to Internal RAM (if NAND boot) + move.d 0x38004000, $r10 + move.d 0x8000, $r11 + move.d 0x11000, $r12 + move.d copy_complete, $r13 + and.d 0x000fffff, $r13 + or.d 0x38000000, $r13 + +#include "../../lib/nand_init.S" + + ;; No NAND found + move.d CONFIG_ETRAX_PTABLE_SECTOR, $r10 + jump $r10 ; Jump to decompresser + nop + +copy_complete: + move.d 0x38000000 + CONFIG_ETRAX_PTABLE_SECTOR, $r10 + jump $r10 ; Jump to decompresser + nop diff --git a/arch/cris/arch-v32/boot/rescue/rescue.ld b/arch/cris/arch-v32/boot/rescue/rescue.ld new file mode 100644 index 000000000000..42b11aa122b2 --- /dev/null +++ b/arch/cris/arch-v32/boot/rescue/rescue.ld @@ -0,0 +1,20 @@ +MEMORY + { + flash : ORIGIN = 0x00000000, + LENGTH = 0x00100000 + } + +SECTIONS +{ + .text : + { + stext = . ; + *(.text) + etext = . ; + } > flash + .data : + { + *(.data) + edata = . ; + } > flash +} diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig new file mode 100644 index 000000000000..a33097f95362 --- /dev/null +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -0,0 +1,625 @@ +config ETRAX_ETHERNET + bool "Ethernet support" + depends on ETRAX_ARCH_V32 + select NET_ETHERNET + help + This option enables the ETRAX FS built-in 10/100Mbit Ethernet + controller. + +config ETRAX_ETHERNET_HW_CSUM + bool "Hardware accelerated ethernet checksum and scatter/gather" + depends on ETRAX_ETHERNET + depends on ETRAX_STREAMCOPROC + default y + help + Hardware acceleration of checksumming and scatter/gather + +config ETRAX_ETHERNET_IFACE0 + depends on ETRAX_ETHERNET + bool "Enable network interface 0" + +config ETRAX_ETHERNET_IFACE1 + depends on ETRAX_ETHERNET + bool "Enable network interface 1 (uses DMA6 and DMA7)" + +choice + prompt "Network LED behavior" + depends on ETRAX_ETHERNET + default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY + +config ETRAX_NETWORK_LED_ON_WHEN_LINK + bool "LED_on_when_link" + help + Selecting LED_on_when_link will light the LED when there is a + connection and will flash off when there is activity. + + Selecting LED_on_when_activity will light the LED only when + there is activity. + + This setting will also affect the behaviour of other activity LEDs + e.g. Bluetooth. + +config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY + bool "LED_on_when_activity" + help + Selecting LED_on_when_link will light the LED when there is a + connection and will flash off when there is activity. + + Selecting LED_on_when_activity will light the LED only when + there is activity. + + This setting will also affect the behaviour of other activity LEDs + e.g. Bluetooth. + +endchoice + +config ETRAXFS_SERIAL + bool "Serial-port support" + depends on ETRAX_ARCH_V32 + help + Enables the ETRAX FS serial driver for ser0 (ttyS0) + You probably want this enabled. + +config ETRAX_SERIAL_PORT0 + bool "Serial port 0 enabled" + depends on ETRAXFS_SERIAL + help + Enables the ETRAX FS serial driver for ser0 (ttyS0) + Normally you want this on. You can control what DMA channels to use + if you do not need DMA to something else. + ser0 can use dma4 or dma6 for output and dma5 or dma7 for input. + +choice + prompt "Ser0 DMA in channel " + depends on ETRAX_SERIAL_PORT0 + default ETRAX_SERIAL_PORT0_NO_DMA_IN + help + What DMA channel to use for ser0. + + +config ETRAX_SERIAL_PORT0_NO_DMA_IN + bool "Ser0 uses no DMA for input" + help + Do not use DMA for ser0 input. + +config ETRAX_SERIAL_PORT0_DMA7_IN + bool "Ser0 uses DMA7 for input" + depends on ETRAX_SERIAL_PORT0 + help + Enables the DMA7 input channel for ser0 (ttyS0). + If you do not enable DMA, an interrupt for each character will be + used when receiveing data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +endchoice + +choice + prompt "Ser0 DMA out channel" + depends on ETRAX_SERIAL_PORT0 + default ETRAX_SERIAL_PORT0_NO_DMA_OUT + +config ETRAX_SERIAL_PORT0_NO_DMA_OUT + bool "Ser0 uses no DMA for output" + help + Do not use DMA for ser0 output. + +config ETRAX_SERIAL_PORT0_DMA6_OUT + bool "Ser0 uses DMA6 for output" + depends on ETRAX_SERIAL_PORT0 + help + Enables the DMA6 output channel for ser0 (ttyS0). + If you do not enable DMA, an interrupt for each character will be + used when transmitting data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +endchoice + +config ETRAX_SER0_DTR_BIT + string "Ser 0 DTR bit (empty = not used)" + depends on ETRAX_SERIAL_PORT0 + +config ETRAX_SER0_RI_BIT + string "Ser 0 RI bit (empty = not used)" + depends on ETRAX_SERIAL_PORT0 + +config ETRAX_SER0_DSR_BIT + string "Ser 0 DSR bit (empty = not used)" + depends on ETRAX_SERIAL_PORT0 + +config ETRAX_SER0_CD_BIT + string "Ser 0 CD bit (empty = not used)" + depends on ETRAX_SERIAL_PORT0 + +config ETRAX_SERIAL_PORT1 + bool "Serial port 1 enabled" + depends on ETRAXFS_SERIAL + help + Enables the ETRAX FS serial driver for ser1 (ttyS1). + +choice + prompt "Ser1 DMA in channel " + depends on ETRAX_SERIAL_PORT1 + default ETRAX_SERIAL_PORT1_NO_DMA_IN + help + What DMA channel to use for ser1. + + +config ETRAX_SERIAL_PORT1_NO_DMA_IN + bool "Ser1 uses no DMA for input" + help + Do not use DMA for ser1 input. + +config ETRAX_SERIAL_PORT1_DMA5_IN + bool "Ser1 uses DMA5 for input" + depends on ETRAX_SERIAL_PORT1 + help + Enables the DMA5 input channel for ser1 (ttyS1). + If you do not enable DMA, an interrupt for each character will be + used when receiveing data. + Normally you want this on, unless you use the DMA channel for + something else. + +endchoice + +choice + prompt "Ser1 DMA out channel " + depends on ETRAX_SERIAL_PORT1 + default ETRAX_SERIAL_PORT1_NO_DMA_OUT + help + What DMA channel to use for ser1. + +config ETRAX_SERIAL_PORT1_NO_DMA_OUT + bool "Ser1 uses no DMA for output" + help + Do not use DMA for ser1 output. + +config ETRAX_SERIAL_PORT1_DMA4_OUT + bool "Ser1 uses DMA4 for output" + depends on ETRAX_SERIAL_PORT1 + help + Enables the DMA4 output channel for ser1 (ttyS1). + If you do not enable DMA, an interrupt for each character will be + used when transmitting data. + Normally you want this on, unless you use the DMA channel for + something else. + +endchoice + +config ETRAX_SER1_DTR_BIT + string "Ser 1 DTR bit (empty = not used)" + depends on ETRAX_SERIAL_PORT1 + +config ETRAX_SER1_RI_BIT + string "Ser 1 RI bit (empty = not used)" + depends on ETRAX_SERIAL_PORT1 + +config ETRAX_SER1_DSR_BIT + string "Ser 1 DSR bit (empty = not used)" + depends on ETRAX_SERIAL_PORT1 + +config ETRAX_SER1_CD_BIT + string "Ser 1 CD bit (empty = not used)" + depends on ETRAX_SERIAL_PORT1 + +config ETRAX_SERIAL_PORT2 + bool "Serial port 2 enabled" + depends on ETRAXFS_SERIAL + help + Enables the ETRAX FS serial driver for ser2 (ttyS2). + +choice + prompt "Ser2 DMA in channel " + depends on ETRAX_SERIAL_PORT2 + default ETRAX_SERIAL_PORT2_NO_DMA_IN + help + What DMA channel to use for ser2. + + +config ETRAX_SERIAL_PORT2_NO_DMA_IN + bool "Ser2 uses no DMA for input" + help + Do not use DMA for ser2 input. + +config ETRAX_SERIAL_PORT2_DMA3_IN + bool "Ser2 uses DMA3 for input" + depends on ETRAX_SERIAL_PORT2 + help + Enables the DMA3 input channel for ser2 (ttyS2). + If you do not enable DMA, an interrupt for each character will be + used when receiveing data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +endchoice + +choice + prompt "Ser2 DMA out channel" + depends on ETRAX_SERIAL_PORT2 + default ETRAX_SERIAL_PORT2_NO_DMA_OUT + +config ETRAX_SERIAL_PORT2_NO_DMA_OUT + bool "Ser2 uses no DMA for output" + help + Do not use DMA for ser2 output. + +config ETRAX_SERIAL_PORT2_DMA2_OUT + bool "Ser2 uses DMA2 for output" + depends on ETRAX_SERIAL_PORT2 + help + Enables the DMA2 output channel for ser2 (ttyS2). + If you do not enable DMA, an interrupt for each character will be + used when transmitting data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +endchoice + +config ETRAX_SER2_DTR_BIT + string "Ser 2 DTR bit (empty = not used)" + depends on ETRAX_SERIAL_PORT2 + +config ETRAX_SER2_RI_BIT + string "Ser 2 RI bit (empty = not used)" + depends on ETRAX_SERIAL_PORT2 + +config ETRAX_SER2_DSR_BIT + string "Ser 2 DSR bit (empty = not used)" + depends on ETRAX_SERIAL_PORT2 + +config ETRAX_SER2_CD_BIT + string "Ser 2 CD bit (empty = not used)" + depends on ETRAX_SERIAL_PORT2 + +config ETRAX_SERIAL_PORT3 + bool "Serial port 3 enabled" + depends on ETRAXFS_SERIAL + help + Enables the ETRAX FS serial driver for ser3 (ttyS3). + +choice + prompt "Ser3 DMA in channel " + depends on ETRAX_SERIAL_PORT3 + default ETRAX_SERIAL_PORT3_NO_DMA_IN + help + What DMA channel to use for ser3. + + +config ETRAX_SERIAL_PORT3_NO_DMA_IN + bool "Ser3 uses no DMA for input" + help + Do not use DMA for ser3 input. + +config ETRAX_SERIAL_PORT3_DMA9_IN + bool "Ser3 uses DMA9 for input" + depends on ETRAX_SERIAL_PORT3 + help + Enables the DMA9 input channel for ser3 (ttyS3). + If you do not enable DMA, an interrupt for each character will be + used when receiveing data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +endchoice + +choice + prompt "Ser3 DMA out channel" + depends on ETRAX_SERIAL_PORT3 + default ETRAX_SERIAL_PORT3_NO_DMA_OUT + +config ETRAX_SERIAL_PORT3_NO_DMA_OUT + bool "Ser3 uses no DMA for output" + help + Do not use DMA for ser3 output. + +config ETRAX_SERIAL_PORT3_DMA8_OUT + bool "Ser3 uses DMA8 for output" + depends on ETRAX_SERIAL_PORT3 + help + Enables the DMA8 output channel for ser3 (ttyS3). + If you do not enable DMA, an interrupt for each character will be + used when transmitting data. + Normally you want to use DMA, unless you use the DMA channel for + something else. + +endchoice + +config ETRAX_SER3_DTR_BIT + string "Ser 3 DTR bit (empty = not used)" + depends on ETRAX_SERIAL_PORT3 + +config ETRAX_SER3_RI_BIT + string "Ser 3 RI bit (empty = not used)" + depends on ETRAX_SERIAL_PORT3 + +config ETRAX_SER3_DSR_BIT + string "Ser 3 DSR bit (empty = not used)" + depends on ETRAX_SERIAL_PORT3 + +config ETRAX_SER3_CD_BIT + string "Ser 3 CD bit (empty = not used)" + depends on ETRAX_SERIAL_PORT3 + +config ETRAX_RS485 + bool "RS-485 support" + depends on ETRAX_SERIAL + help + Enables support for RS-485 serial communication. For a primer on + RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>. + +config ETRAX_RS485_DISABLE_RECEIVER + bool "Disable serial receiver" + depends on ETRAX_RS485 + help + It is necessary to disable the serial receiver to avoid serial + loopback. Not all products are able to do this in software only. + Axis 2400/2401 must disable receiver. + +config ETRAX_AXISFLASHMAP + bool "Axis flash-map support" + depends on ETRAX_ARCH_V32 + select MTD + select MTD_CFI + select MTD_CFI_AMDSTD + select MTD_OBSOLETE_CHIPS + select MTD_AMDSTD + select MTD_CHAR + select MTD_BLOCK + select MTD_PARTITIONS + select MTD_CONCAT + select MTD_COMPLEX_MAPPINGS + help + This option enables MTD mapping of flash devices. Needed to use + flash memories. If unsure, say Y. + +config ETRAX_SYNCHRONOUS_SERIAL + bool "Synchronous serial-port support" + depends on ETRAX_ARCH_V32 + help + Enables the ETRAX FS synchronous serial driver. + +config ETRAX_SYNCHRONOUS_SERIAL_PORT0 + bool "Synchronous serial port 0 enabled" + depends on ETRAX_SYNCHRONOUS_SERIAL + help + Enabled synchronous serial port 0. + +config ETRAX_SYNCHRONOUS_SERIAL0_DMA + bool "Enable DMA on synchronous serial port 0." + depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0 + help + A synchronous serial port can run in manual or DMA mode. + Selecting this option will make it run in DMA mode. + +config ETRAX_SYNCHRONOUS_SERIAL_PORT1 + bool "Synchronous serial port 1 enabled" + depends on ETRAX_SYNCHRONOUS_SERIAL + help + Enabled synchronous serial port 1. + +config ETRAX_SYNCHRONOUS_SERIAL1_DMA + bool "Enable DMA on synchronous serial port 1." + depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1 + help + A synchronous serial port can run in manual or DMA mode. + Selecting this option will make it run in DMA mode. + +config ETRAX_PTABLE_SECTOR + int "Byte-offset of partition table sector" + depends on ETRAX_AXISFLASHMAP + default "65536" + help + Byte-offset of the partition table in the first flash chip. + The default value is 64kB and should not be changed unless + you know exactly what you are doing. The only valid reason + for changing this is when the flash block size is bigger + than 64kB (e.g. when using two parallel 16 bit flashes). + +config ETRAX_NANDFLASH + bool "NAND flash support" + depends on ETRAX_ARCH_V32 + select MTD_NAND + select MTD_NAND_IDS + help + This option enables MTD mapping of NAND flash devices. Needed to use + NAND flash memories. If unsure, say Y. + +config ETRAX_I2C + bool "I2C driver" + depends on ETRAX_ARCH_V32 + help + This option enabled the I2C driver used by e.g. the RTC driver. + +config ETRAX_I2C_DATA_PORT + string "I2C data pin" + depends on ETRAX_I2C + help + The pin to use for I2C data. + +config ETRAX_I2C_CLK_PORT + string "I2C clock pin" + depends on ETRAX_I2C + help + The pin to use for I2C clock. + +config ETRAX_RTC + bool "Real Time Clock support" + depends on ETRAX_ARCH_V32 + help + Enabled RTC support. + +choice + prompt "RTC chip" + depends on ETRAX_RTC + default ETRAX_PCF8563 + +config ETRAX_PCF8563 + bool "PCF8563" + help + Philips PCF8563 RTC + +endchoice + +config ETRAX_GPIO + bool "GPIO support" + depends on ETRAX_ARCH_V32 + ---help--- + Enables the ETRAX general port device (major 120, minors 0-4). + You can use this driver to access the general port bits. It supports + these ioctl's: + #include <linux/etraxgpio.h> + fd = open("/dev/gpioa", O_RDWR); // or /dev/gpiob + ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS), bits_to_set); + ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS), bits_to_clear); + err = ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_READ_INBITS), &val); + Remember that you need to setup the port directions appropriately in + the General configuration. + +config ETRAX_PA_BUTTON_BITMASK + hex "PA-buttons bitmask" + depends on ETRAX_GPIO + default "0x02" + help + This is a bitmask (8 bits) with information about what bits on PA + that are used for buttons. + Most products has a so called TEST button on PA1, if that is true + use 0x02 here. + Use 00 if there are no buttons on PA. + If the bitmask is <> 00 a button driver will be included in the gpio + driver. ETRAX general I/O support must be enabled. + +config ETRAX_PA_CHANGEABLE_DIR + hex "PA user changeable dir mask" + depends on ETRAX_GPIO + default "0x00" + help + This is a bitmask (8 bits) with information of what bits in PA that a + user can change direction on using ioctl's. + Bit set = changeable. + You probably want 0x00 here, but it depends on your hardware. + +config ETRAX_PA_CHANGEABLE_BITS + hex "PA user changeable bits mask" + depends on ETRAX_GPIO + default "0x00" + help + This is a bitmask (8 bits) with information of what bits in PA + that a user can change the value on using ioctl's. + Bit set = changeable. + +config ETRAX_PB_CHANGEABLE_DIR + hex "PB user changeable dir mask" + depends on ETRAX_GPIO + default "0x00000" + help + This is a bitmask (18 bits) with information of what bits in PB + that a user can change direction on using ioctl's. + Bit set = changeable. + You probably want 0x00000 here, but it depends on your hardware. + +config ETRAX_PB_CHANGEABLE_BITS + hex "PB user changeable bits mask" + depends on ETRAX_GPIO + default "0x00000" + help + This is a bitmask (18 bits) with information of what bits in PB + that a user can change the value on using ioctl's. + Bit set = changeable. + +config ETRAX_PC_CHANGEABLE_DIR + hex "PC user changeable dir mask" + depends on ETRAX_GPIO + default "0x00000" + help + This is a bitmask (18 bits) with information of what bits in PC + that a user can change direction on using ioctl's. + Bit set = changeable. + You probably want 0x00000 here, but it depends on your hardware. + +config ETRAX_PC_CHANGEABLE_BITS + hex "PC user changeable bits mask" + depends on ETRAX_GPIO + default "0x00000" + help + This is a bitmask (18 bits) with information of what bits in PC + that a user can change the value on using ioctl's. + Bit set = changeable. + +config ETRAX_PD_CHANGEABLE_DIR + hex "PD user changeable dir mask" + depends on ETRAX_GPIO + default "0x00000" + help + This is a bitmask (18 bits) with information of what bits in PD + that a user can change direction on using ioctl's. + Bit set = changeable. + You probably want 0x00000 here, but it depends on your hardware. + +config ETRAX_PD_CHANGEABLE_BITS + hex "PD user changeable bits mask" + depends on ETRAX_GPIO + default "0x00000" + help + This is a bitmask (18 bits) with information of what bits in PD + that a user can change the value on using ioctl's. + Bit set = changeable. + +config ETRAX_PE_CHANGEABLE_DIR + hex "PE user changeable dir mask" + depends on ETRAX_GPIO + default "0x00000" + help + This is a bitmask (18 bits) with information of what bits in PE + that a user can change direction on using ioctl's. + Bit set = changeable. + You probably want 0x00000 here, but it depends on your hardware. + +config ETRAX_PE_CHANGEABLE_BITS + hex "PE user changeable bits mask" + depends on ETRAX_GPIO + default "0x00000" + help + This is a bitmask (18 bits) with information of what bits in PE + that a user can change the value on using ioctl's. + Bit set = changeable. + +config ETRAX_IDE + bool "ATA/IDE support" + depends on ETRAX_ARCH_V32 + select IDE + select BLK_DEV_IDE + select BLK_DEV_IDEDISK + select BLK_DEV_IDECD + select BLK_DEV_IDEDMA + help + Enables the ETRAX IDE driver. + +config ETRAX_CARDBUS + bool "Cardbus support" + depends on ETRAX_ARCH_V32 + select PCCARD + select CARDBUS + select HOTPLUG + select PCCARD_NONSTATIC + help + Enabled the ETRAX Carbus driver. + +config PCI + bool + depends on ETRAX_CARDBUS + default y + +config ETRAX_IOP_FW_LOAD + tristate "IO-processor hotplug firmware loading support" + depends on ETRAX_ARCH_V32 + select FW_LOADER + help + Enables IO-processor hotplug firmware loading support. + +config ETRAX_STREAMCOPROC + tristate "Stream co-processor driver enabled" + depends on ETRAX_ARCH_V32 + help + This option enables a driver for the stream co-processor + for cryptographic operations. diff --git a/arch/cris/arch-v32/drivers/Makefile b/arch/cris/arch-v32/drivers/Makefile new file mode 100644 index 000000000000..a359cd20ae75 --- /dev/null +++ b/arch/cris/arch-v32/drivers/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for Etrax-specific drivers +# + +obj-$(CONFIG_ETRAX_STREAMCOPROC) += cryptocop.o +obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o +obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o +obj-$(CONFIG_ETRAX_GPIO) += gpio.o +obj-$(CONFIG_ETRAX_IOP_FW_LOAD) += iop_fw_load.o +obj-$(CONFIG_ETRAX_PCF8563) += pcf8563.o +obj-$(CONFIG_ETRAX_I2C) += i2c.o +obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o +obj-$(CONFIG_PCI) += pci/ diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c new file mode 100644 index 000000000000..78ed52b1cdac --- /dev/null +++ b/arch/cris/arch-v32/drivers/axisflashmap.c @@ -0,0 +1,455 @@ +/* + * Physical mapping layer for MTD using the Axis partitiontable format + * + * Copyright (c) 2001, 2002, 2003 Axis Communications AB + * + * This file is under the GPL. + * + * First partition is always sector 0 regardless of if we find a partitiontable + * or not. In the start of the next sector, there can be a partitiontable that + * tells us what other partitions to define. If there isn't, we use a default + * partition split defined below. + * + * Copy of os/lx25/arch/cris/arch-v10/drivers/axisflashmap.c 1.5 + * with minor changes. + * + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/config.h> +#include <linux/init.h> + +#include <linux/mtd/concat.h> +#include <linux/mtd/map.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/mtdram.h> +#include <linux/mtd/partitions.h> + +#include <asm/arch/hwregs/config_defs.h> +#include <asm/axisflashmap.h> +#include <asm/mmu.h> + +#define MEM_CSE0_SIZE (0x04000000) +#define MEM_CSE1_SIZE (0x04000000) + +#define FLASH_UNCACHED_ADDR KSEG_E +#define FLASH_CACHED_ADDR KSEG_F + +#if CONFIG_ETRAX_FLASH_BUSWIDTH==1 +#define flash_data __u8 +#elif CONFIG_ETRAX_FLASH_BUSWIDTH==2 +#define flash_data __u16 +#elif CONFIG_ETRAX_FLASH_BUSWIDTH==4 +#define flash_data __u16 +#endif + +/* From head.S */ +extern unsigned long romfs_start, romfs_length, romfs_in_flash; + +/* The master mtd for the entire flash. */ +struct mtd_info* axisflash_mtd = NULL; + +/* Map driver functions. */ + +static map_word flash_read(struct map_info *map, unsigned long ofs) +{ + map_word tmp; + tmp.x[0] = *(flash_data *)(map->map_priv_1 + ofs); + return tmp; +} + +static void flash_copy_from(struct map_info *map, void *to, + unsigned long from, ssize_t len) +{ + memcpy(to, (void *)(map->map_priv_1 + from), len); +} + +static void flash_write(struct map_info *map, map_word d, unsigned long adr) +{ + *(flash_data *)(map->map_priv_1 + adr) = (flash_data)d.x[0]; +} + +/* + * The map for chip select e0. + * + * We run into tricky coherence situations if we mix cached with uncached + * accesses to we only use the uncached version here. + * + * The size field is the total size where the flash chips may be mapped on the + * chip select. MTD probes should find all devices there and it does not matter + * if there are unmapped gaps or aliases (mirrors of flash devices). The MTD + * probes will ignore them. + * + * The start address in map_priv_1 is in virtual memory so we cannot use + * MEM_CSE0_START but must rely on that FLASH_UNCACHED_ADDR is the start + * address of cse0. + */ +static struct map_info map_cse0 = { + .name = "cse0", + .size = MEM_CSE0_SIZE, + .bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH, + .read = flash_read, + .copy_from = flash_copy_from, + .write = flash_write, + .map_priv_1 = FLASH_UNCACHED_ADDR +}; + +/* + * The map for chip select e1. + * + * If there was a gap between cse0 and cse1, map_priv_1 would get the wrong + * address, but there isn't. + */ +static struct map_info map_cse1 = { + .name = "cse1", + .size = MEM_CSE1_SIZE, + .bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH, + .read = flash_read, + .copy_from = flash_copy_from, + .write = flash_write, + .map_priv_1 = FLASH_UNCACHED_ADDR + MEM_CSE0_SIZE +}; + +/* If no partition-table was found, we use this default-set. */ +#define MAX_PARTITIONS 7 +#define NUM_DEFAULT_PARTITIONS 3 + +/* + * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the + * size of one flash block and "filesystem"-partition needs 5 blocks to be able + * to use JFFS. + */ +static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { + { + .name = "boot firmware", + .size = CONFIG_ETRAX_PTABLE_SECTOR, + .offset = 0 + }, + { + .name = "kernel", + .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR), + .offset = CONFIG_ETRAX_PTABLE_SECTOR + }, + { + .name = "filesystem", + .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR, + .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR) + } +}; + +/* Initialize the ones normally used. */ +static struct mtd_partition axis_partitions[MAX_PARTITIONS] = { + { + .name = "part0", + .size = CONFIG_ETRAX_PTABLE_SECTOR, + .offset = 0 + }, + { + .name = "part1", + .size = 0, + .offset = 0 + }, + { + .name = "part2", + .size = 0, + .offset = 0 + }, + { + .name = "part3", + .size = 0, + .offset = 0 + }, + { + .name = "part4", + .size = 0, + .offset = 0 + }, + { + .name = "part5", + .size = 0, + .offset = 0 + }, + { + .name = "part6", + .size = 0, + .offset = 0 + }, +}; + +/* + * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash + * chips in that order (because the amd_flash-driver is faster). + */ +static struct mtd_info *probe_cs(struct map_info *map_cs) +{ + struct mtd_info *mtd_cs = NULL; + + printk(KERN_INFO + "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n", + map_cs->name, map_cs->size, map_cs->map_priv_1); + +#ifdef CONFIG_MTD_AMDSTD + mtd_cs = do_map_probe("amd_flash", map_cs); +#endif +#ifdef CONFIG_MTD_CFI + if (!mtd_cs) { + mtd_cs = do_map_probe("cfi_probe", map_cs); + } +#endif + + return mtd_cs; +} + +/* + * Probe each chip select individually for flash chips. If there are chips on + * both cse0 and cse1, the mtd_info structs will be concatenated to one struct + * so that MTD partitions can cross chip boundries. + * + * The only known restriction to how you can mount your chips is that each + * chip select must hold similar flash chips. But you need external hardware + * to do that anyway and you can put totally different chips on cse0 and cse1 + * so it isn't really much of a restriction. + */ +extern struct mtd_info* __init crisv32_nand_flash_probe (void); +static struct mtd_info *flash_probe(void) +{ + struct mtd_info *mtd_cse0; + struct mtd_info *mtd_cse1; + struct mtd_info *mtd_nand = NULL; + struct mtd_info *mtd_total; + struct mtd_info *mtds[3]; + int count = 0; + + if ((mtd_cse0 = probe_cs(&map_cse0)) != NULL) + mtds[count++] = mtd_cse0; + if ((mtd_cse1 = probe_cs(&map_cse1)) != NULL) + mtds[count++] = mtd_cse1; + +#ifdef CONFIG_ETRAX_NANDFLASH + if ((mtd_nand = crisv32_nand_flash_probe()) != NULL) + mtds[count++] = mtd_nand; +#endif + + if (!mtd_cse0 && !mtd_cse1 && !mtd_nand) { + /* No chip found. */ + return NULL; + } + + if (count > 1) { +#ifdef CONFIG_MTD_CONCAT + /* Since the concatenation layer adds a small overhead we + * could try to figure out if the chips in cse0 and cse1 are + * identical and reprobe the whole cse0+cse1 window. But since + * flash chips are slow, the overhead is relatively small. + * So we use the MTD concatenation layer instead of further + * complicating the probing procedure. + */ + mtd_total = mtd_concat_create(mtds, + count, + "cse0+cse1+nand"); +#else + printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel " + "(mis)configuration!\n", map_cse0.name, map_cse1.name); + mtd_toal = NULL; +#endif + if (!mtd_total) { + printk(KERN_ERR "%s and %s: Concatenation failed!\n", + map_cse0.name, map_cse1.name); + + /* The best we can do now is to only use what we found + * at cse0. + */ + mtd_total = mtd_cse0; + map_destroy(mtd_cse1); + } + } else { + mtd_total = mtd_cse0? mtd_cse0 : mtd_cse1 ? mtd_cse1 : mtd_nand; + + } + + return mtd_total; +} + +extern unsigned long crisv32_nand_boot; +extern unsigned long crisv32_nand_cramfs_offset; + +/* + * Probe the flash chip(s) and, if it succeeds, read the partition-table + * and register the partitions with MTD. + */ +static int __init init_axis_flash(void) +{ + struct mtd_info *mymtd; + int err = 0; + int pidx = 0; + struct partitiontable_head *ptable_head = NULL; + struct partitiontable_entry *ptable; + int use_default_ptable = 1; /* Until proven otherwise. */ + const char *pmsg = KERN_INFO " /dev/flash%d at 0x%08x, size 0x%08x\n"; + static char page[512]; + size_t len; + +#ifndef CONFIG_ETRAXFS_SIM + mymtd = flash_probe(); + mymtd->read(mymtd, CONFIG_ETRAX_PTABLE_SECTOR, 512, &len, page); + ptable_head = (struct partitiontable_head *)(page + PARTITION_TABLE_OFFSET); + + if (!mymtd) { + /* There's no reason to use this module if no flash chip can + * be identified. Make sure that's understood. + */ + printk(KERN_INFO "axisflashmap: Found no flash chip.\n"); + } else { + printk(KERN_INFO "%s: 0x%08x bytes of flash memory.\n", + mymtd->name, mymtd->size); + axisflash_mtd = mymtd; + } + + if (mymtd) { + mymtd->owner = THIS_MODULE; + } + pidx++; /* First partition is always set to the default. */ + + if (ptable_head && (ptable_head->magic == PARTITION_TABLE_MAGIC) + && (ptable_head->size < + (MAX_PARTITIONS * sizeof(struct partitiontable_entry) + + PARTITIONTABLE_END_MARKER_SIZE)) + && (*(unsigned long*)((void*)ptable_head + sizeof(*ptable_head) + + ptable_head->size - + PARTITIONTABLE_END_MARKER_SIZE) + == PARTITIONTABLE_END_MARKER)) { + /* Looks like a start, sane length and end of a + * partition table, lets check csum etc. + */ + int ptable_ok = 0; + struct partitiontable_entry *max_addr = + (struct partitiontable_entry *) + ((unsigned long)ptable_head + sizeof(*ptable_head) + + ptable_head->size); + unsigned long offset = CONFIG_ETRAX_PTABLE_SECTOR; + unsigned char *p; + unsigned long csum = 0; + + ptable = (struct partitiontable_entry *) + ((unsigned long)ptable_head + sizeof(*ptable_head)); + + /* Lets be PARANOID, and check the checksum. */ + p = (unsigned char*) ptable; + + while (p <= (unsigned char*)max_addr) { + csum += *p++; + csum += *p++; + csum += *p++; + csum += *p++; + } + ptable_ok = (csum == ptable_head->checksum); + + /* Read the entries and use/show the info. */ + printk(KERN_INFO " Found a%s partition table at 0x%p-0x%p.\n", + (ptable_ok ? " valid" : "n invalid"), ptable_head, + max_addr); + + /* We have found a working bootblock. Now read the + * partition table. Scan the table. It ends when + * there is 0xffffffff, that is, empty flash. + */ + while (ptable_ok + && ptable->offset != 0xffffffff + && ptable < max_addr + && pidx < MAX_PARTITIONS) { + + axis_partitions[pidx].offset = offset + ptable->offset + (crisv32_nand_boot ? 16384 : 0); + axis_partitions[pidx].size = ptable->size; + + printk(pmsg, pidx, axis_partitions[pidx].offset, + axis_partitions[pidx].size); + pidx++; + ptable++; + } + use_default_ptable = !ptable_ok; + } + + if (romfs_in_flash) { + /* Add an overlapping device for the root partition (romfs). */ + + axis_partitions[pidx].name = "romfs"; + if (crisv32_nand_boot) { + char* data = kmalloc(1024, GFP_KERNEL); + int len; + int offset = crisv32_nand_cramfs_offset & ~(1024-1); + char* tmp; + + mymtd->read(mymtd, offset, 1024, &len, data); + tmp = &data[crisv32_nand_cramfs_offset % 512]; + axis_partitions[pidx].size = *(unsigned*)(tmp + 4); + axis_partitions[pidx].offset = crisv32_nand_cramfs_offset; + kfree(data); + } else { + axis_partitions[pidx].size = romfs_length; + axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR; + } + + axis_partitions[pidx].mask_flags |= MTD_WRITEABLE; + + printk(KERN_INFO + " Adding readonly flash partition for romfs image:\n"); + printk(pmsg, pidx, axis_partitions[pidx].offset, + axis_partitions[pidx].size); + pidx++; + } + + if (mymtd) { + if (use_default_ptable) { + printk(KERN_INFO " Using default partition table.\n"); + err = add_mtd_partitions(mymtd, axis_default_partitions, + NUM_DEFAULT_PARTITIONS); + } else { + err = add_mtd_partitions(mymtd, axis_partitions, pidx); + } + + if (err) { + panic("axisflashmap could not add MTD partitions!\n"); + } + } +/* CONFIG_EXTRAXFS_SIM */ +#endif + + if (!romfs_in_flash) { + /* Create an RAM device for the root partition (romfs). */ + +#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0) + /* No use trying to boot this kernel from RAM. Panic! */ + printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM " + "device due to kernel (mis)configuration!\n"); + panic("This kernel cannot boot from RAM!\n"); +#else + struct mtd_info *mtd_ram; + + mtd_ram = (struct mtd_info *)kmalloc(sizeof(struct mtd_info), + GFP_KERNEL); + if (!mtd_ram) { + panic("axisflashmap couldn't allocate memory for " + "mtd_info!\n"); + } + + printk(KERN_INFO " Adding RAM partition for romfs image:\n"); + printk(pmsg, pidx, romfs_start, romfs_length); + + err = mtdram_init_device(mtd_ram, (void*)romfs_start, + romfs_length, "romfs"); + if (err) { + panic("axisflashmap could not initialize MTD RAM " + "device!\n"); + } +#endif + } + + return err; +} + +/* This adds the above to the kernels init-call chain. */ +module_init(init_axis_flash); + +EXPORT_SYMBOL(axisflash_mtd); diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c new file mode 100644 index 000000000000..ca72076c630a --- /dev/null +++ b/arch/cris/arch-v32/drivers/cryptocop.c @@ -0,0 +1,3522 @@ +/* $Id: cryptocop.c,v 1.13 2005/04/21 17:27:55 henriken Exp $ + * + * Stream co-processor driver for the ETRAX FS + * + * Copyright (C) 2003-2005 Axis Communications AB + */ + +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/spinlock.h> +#include <linux/stddef.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/atomic.h> + +#include <linux/list.h> +#include <linux/interrupt.h> + +#include <asm/signal.h> +#include <asm/irq.h> + +#include <asm/arch/dma.h> +#include <asm/arch/hwregs/dma.h> +#include <asm/arch/hwregs/reg_map.h> +#include <asm/arch/hwregs/reg_rdwr.h> +#include <asm/arch/hwregs/intr_vect_defs.h> + +#include <asm/arch/hwregs/strcop.h> +#include <asm/arch/hwregs/strcop_defs.h> +#include <asm/arch/cryptocop.h> + + + +#define DESCR_ALLOC_PAD (31) + +struct cryptocop_dma_desc { + char *free_buf; /* If non-null will be kfreed in free_cdesc() */ + dma_descr_data *dma_descr; + + unsigned char dma_descr_buf[sizeof(dma_descr_data) + DESCR_ALLOC_PAD]; + + unsigned int from_pool:1; /* If 1 'allocated' from the descriptor pool. */ + struct cryptocop_dma_desc *next; +}; + + +struct cryptocop_int_operation{ + void *alloc_ptr; + cryptocop_session_id sid; + + dma_descr_context ctx_out; + dma_descr_context ctx_in; + + /* DMA descriptors allocated by driver. */ + struct cryptocop_dma_desc *cdesc_out; + struct cryptocop_dma_desc *cdesc_in; + + /* Strcop config to use. */ + cryptocop_3des_mode tdes_mode; + cryptocop_csum_type csum_mode; + + /* DMA descrs provided by consumer. */ + dma_descr_data *ddesc_out; + dma_descr_data *ddesc_in; +}; + + +struct cryptocop_tfrm_ctx { + cryptocop_tfrm_id tid; + unsigned int blocklength; + + unsigned int start_ix; + + struct cryptocop_tfrm_cfg *tcfg; + struct cryptocop_transform_ctx *tctx; + + unsigned char previous_src; + unsigned char current_src; + + /* Values to use in metadata out. */ + unsigned char hash_conf; + unsigned char hash_mode; + unsigned char ciph_conf; + unsigned char cbcmode; + unsigned char decrypt; + + unsigned int requires_padding:1; + unsigned int strict_block_length:1; + unsigned int active:1; + unsigned int done:1; + size_t consumed; + size_t produced; + + /* Pad (input) descriptors to put in the DMA out list when the transform + * output is put on the DMA in list. */ + struct cryptocop_dma_desc *pad_descs; + + struct cryptocop_tfrm_ctx *prev_src; + struct cryptocop_tfrm_ctx *curr_src; + + /* Mapping to HW. */ + unsigned char unit_no; +}; + + +struct cryptocop_private{ + cryptocop_session_id sid; + struct cryptocop_private *next; +}; + +/* Session list. */ + +struct cryptocop_transform_ctx{ + struct cryptocop_transform_init init; + unsigned char dec_key[CRYPTOCOP_MAX_KEY_LENGTH]; + unsigned int dec_key_set:1; + + struct cryptocop_transform_ctx *next; +}; + + +struct cryptocop_session{ + cryptocop_session_id sid; + + struct cryptocop_transform_ctx *tfrm_ctx; + + struct cryptocop_session *next; +}; + +/* Priority levels for jobs sent to the cryptocop. Checksum operations from + kernel have highest priority since TCPIP stack processing must not + be a bottleneck. */ +typedef enum { + cryptocop_prio_kernel_csum = 0, + cryptocop_prio_kernel = 1, + cryptocop_prio_user = 2, + cryptocop_prio_no_prios = 3 +} cryptocop_queue_priority; + +struct cryptocop_prio_queue{ + struct list_head jobs; + cryptocop_queue_priority prio; +}; + +struct cryptocop_prio_job{ + struct list_head node; + cryptocop_queue_priority prio; + + struct cryptocop_operation *oper; + struct cryptocop_int_operation *iop; +}; + +struct ioctl_job_cb_ctx { + unsigned int processed:1; +}; + + +static struct cryptocop_session *cryptocop_sessions = NULL; +spinlock_t cryptocop_sessions_lock; + +/* Next Session ID to assign. */ +static cryptocop_session_id next_sid = 1; + +/* Pad for checksum. */ +static const char csum_zero_pad[1] = {0x00}; + +/* Trash buffer for mem2mem operations. */ +#define MEM2MEM_DISCARD_BUF_LENGTH (512) +static unsigned char mem2mem_discard_buf[MEM2MEM_DISCARD_BUF_LENGTH]; + +/* Descriptor pool. */ +/* FIXME Tweak this value. */ +#define CRYPTOCOP_DESCRIPTOR_POOL_SIZE (100) +static struct cryptocop_dma_desc descr_pool[CRYPTOCOP_DESCRIPTOR_POOL_SIZE]; +static struct cryptocop_dma_desc *descr_pool_free_list; +static int descr_pool_no_free; +static spinlock_t descr_pool_lock; + +/* Lock to stop cryptocop to start processing of a new operation. The holder + of this lock MUST call cryptocop_start_job() after it is unlocked. */ +spinlock_t cryptocop_process_lock; + +static struct cryptocop_prio_queue cryptocop_job_queues[cryptocop_prio_no_prios]; +static spinlock_t cryptocop_job_queue_lock; +static struct cryptocop_prio_job *cryptocop_running_job = NULL; +static spinlock_t running_job_lock; + +/* The interrupt handler appends completed jobs to this list. The scehduled + * tasklet removes them upon sending the response to the crypto consumer. */ +static struct list_head cryptocop_completed_jobs; +static spinlock_t cryptocop_completed_jobs_lock; + +DECLARE_WAIT_QUEUE_HEAD(cryptocop_ioc_process_wq); + + +/** Local functions. **/ + +static int cryptocop_open(struct inode *, struct file *); + +static int cryptocop_release(struct inode *, struct file *); + +static int cryptocop_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg); + +static void cryptocop_start_job(void); + +static int cryptocop_job_queue_insert(cryptocop_queue_priority prio, struct cryptocop_operation *operation); +static int cryptocop_job_setup(struct cryptocop_prio_job **pj, struct cryptocop_operation *operation); + +static int cryptocop_job_queue_init(void); +static void cryptocop_job_queue_close(void); + +static int create_md5_pad(int alloc_flag, unsigned long long hashed_length, char **pad, size_t *pad_length); + +static int create_sha1_pad(int alloc_flag, unsigned long long hashed_length, char **pad, size_t *pad_length); + +static int transform_ok(struct cryptocop_transform_init *tinit); + +static struct cryptocop_session *get_session(cryptocop_session_id sid); + +static struct cryptocop_transform_ctx *get_transform_ctx(struct cryptocop_session *sess, cryptocop_tfrm_id tid); + +static void delete_internal_operation(struct cryptocop_int_operation *iop); + +static void get_aes_decrypt_key(unsigned char *dec_key, const unsigned char *key, unsigned int keylength); + +static int init_stream_coprocessor(void); + +static void __exit exit_stream_coprocessor(void); + +/*#define LDEBUG*/ +#ifdef LDEBUG +#define DEBUG(s) s +#define DEBUG_API(s) s +static void print_cryptocop_operation(struct cryptocop_operation *cop); +static void print_dma_descriptors(struct cryptocop_int_operation *iop); +static void print_strcop_crypto_op(struct strcop_crypto_op *cop); +static void print_lock_status(void); +static void print_user_dma_lists(struct cryptocop_dma_list_operation *dma_op); +#define assert(s) do{if (!(s)) panic(#s);} while(0); +#else +#define DEBUG(s) +#define DEBUG_API(s) +#define assert(s) +#endif + + +/* Transform constants. */ +#define DES_BLOCK_LENGTH (8) +#define AES_BLOCK_LENGTH (16) +#define MD5_BLOCK_LENGTH (64) +#define SHA1_BLOCK_LENGTH (64) +#define CSUM_BLOCK_LENGTH (2) +#define MD5_STATE_LENGTH (16) +#define SHA1_STATE_LENGTH (20) + +/* The device number. */ +#define CRYPTOCOP_MAJOR (254) +#define CRYPTOCOP_MINOR (0) + + + +struct file_operations cryptocop_fops = { + owner: THIS_MODULE, + open: cryptocop_open, + release: cryptocop_release, + ioctl: cryptocop_ioctl +}; + + +static void free_cdesc(struct cryptocop_dma_desc *cdesc) +{ + DEBUG(printk("free_cdesc: cdesc 0x%p, from_pool=%d\n", cdesc, cdesc->from_pool)); + if (cdesc->free_buf) kfree(cdesc->free_buf); + + if (cdesc->from_pool) { + unsigned long int flags; + spin_lock_irqsave(&descr_pool_lock, flags); + cdesc->next = descr_pool_free_list; + descr_pool_free_list = cdesc; + ++descr_pool_no_free; + spin_unlock_irqrestore(&descr_pool_lock, flags); + } else { + kfree(cdesc); + } +} + + +static struct cryptocop_dma_desc *alloc_cdesc(int alloc_flag) +{ + int use_pool = (alloc_flag & GFP_ATOMIC) ? 1 : 0; + struct cryptocop_dma_desc *cdesc; + + if (use_pool) { + unsigned long int flags; + spin_lock_irqsave(&descr_pool_lock, flags); + if (!descr_pool_free_list) { + spin_unlock_irqrestore(&descr_pool_lock, flags); + DEBUG_API(printk("alloc_cdesc: pool is empty\n")); + return NULL; + } + cdesc = descr_pool_free_list; + descr_pool_free_list = descr_pool_free_list->next; + --descr_pool_no_free; + spin_unlock_irqrestore(&descr_pool_lock, flags); + cdesc->from_pool = 1; + } else { + cdesc = kmalloc(sizeof(struct cryptocop_dma_desc), alloc_flag); + if (!cdesc) { + DEBUG_API(printk("alloc_cdesc: kmalloc\n")); + return NULL; + } + cdesc->from_pool = 0; + } + cdesc->dma_descr = (dma_descr_data*)(((unsigned long int)cdesc + offsetof(struct cryptocop_dma_desc, dma_descr_buf) + DESCR_ALLOC_PAD) & ~0x0000001F); + + cdesc->next = NULL; + + cdesc->free_buf = NULL; + cdesc->dma_descr->out_eop = 0; + cdesc->dma_descr->in_eop = 0; + cdesc->dma_descr->intr = 0; + cdesc->dma_descr->eol = 0; + cdesc->dma_descr->wait = 0; + cdesc->dma_descr->buf = NULL; + cdesc->dma_descr->after = NULL; + + DEBUG_API(printk("alloc_cdesc: return 0x%p, cdesc->dma_descr=0x%p, from_pool=%d\n", cdesc, cdesc->dma_descr, cdesc->from_pool)); + return cdesc; +} + + +static void setup_descr_chain(struct cryptocop_dma_desc *cd) +{ + DEBUG(printk("setup_descr_chain: entering\n")); + while (cd) { + if (cd->next) { + cd->dma_descr->next = (dma_descr_data*)virt_to_phys(cd->next->dma_descr); + } else { + cd->dma_descr->next = NULL; + } + cd = cd->next; + } + DEBUG(printk("setup_descr_chain: exit\n")); +} + + +/* Create a pad descriptor for the transform. + * Return -1 for error, 0 if pad created. */ +static int create_pad_descriptor(struct cryptocop_tfrm_ctx *tc, struct cryptocop_dma_desc **pad_desc, int alloc_flag) +{ + struct cryptocop_dma_desc *cdesc = NULL; + int error = 0; + struct strcop_meta_out mo = { + .ciphsel = src_none, + .hashsel = src_none, + .csumsel = src_none + }; + char *pad; + size_t plen; + + DEBUG(printk("create_pad_descriptor: start.\n")); + /* Setup pad descriptor. */ + + DEBUG(printk("create_pad_descriptor: setting up padding.\n")); + cdesc = alloc_cdesc(alloc_flag); + if (!cdesc){ + DEBUG_API(printk("create_pad_descriptor: alloc pad desc\n")); + goto error_cleanup; + } + switch (tc->unit_no) { + case src_md5: + error = create_md5_pad(alloc_flag, tc->consumed, &pad, &plen); + if (error){ + DEBUG_API(printk("create_pad_descriptor: create_md5_pad_failed\n")); + goto error_cleanup; + } + cdesc->free_buf = pad; + mo.hashsel = src_dma; + mo.hashconf = tc->hash_conf; + mo.hashmode = tc->hash_mode; + break; + case src_sha1: + error = create_sha1_pad(alloc_flag, tc->consumed, &pad, &plen); + if (error){ + DEBUG_API(printk("create_pad_descriptor: create_sha1_pad_failed\n")); + goto error_cleanup; + } + cdesc->free_buf = pad; + mo.hashsel = src_dma; + mo.hashconf = tc->hash_conf; + mo.hashmode = tc->hash_mode; + break; + case src_csum: + if (tc->consumed % tc->blocklength){ + pad = (char*)csum_zero_pad; + plen = 1; + } else { + pad = (char*)cdesc; /* Use any pointer. */ + plen = 0; + } + mo.csumsel = src_dma; + break; + } + cdesc->dma_descr->wait = 1; + cdesc->dma_descr->out_eop = 1; /* Since this is a pad output is pushed. EOP is ok here since the padded unit is the only one active. */ + cdesc->dma_descr->buf = (char*)virt_to_phys((char*)pad); + cdesc->dma_descr->after = cdesc->dma_descr->buf + plen; + + cdesc->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_out, mo); + *pad_desc = cdesc; + + return 0; + + error_cleanup: + if (cdesc) free_cdesc(cdesc); + return -1; +} + + +static int setup_key_dl_desc(struct cryptocop_tfrm_ctx *tc, struct cryptocop_dma_desc **kd, int alloc_flag) +{ + struct cryptocop_dma_desc *key_desc = alloc_cdesc(alloc_flag); + struct strcop_meta_out mo = {0}; + + DEBUG(printk("setup_key_dl_desc\n")); + + if (!key_desc) { + DEBUG_API(printk("setup_key_dl_desc: failed descriptor allocation.\n")); + return -ENOMEM; + } + + /* Download key. */ + if ((tc->tctx->init.alg == cryptocop_alg_aes) && (tc->tcfg->flags & CRYPTOCOP_DECRYPT)) { + /* Precook the AES decrypt key. */ + if (!tc->tctx->dec_key_set){ + get_aes_decrypt_key(tc->tctx->dec_key, tc->tctx->init.key, tc->tctx->init.keylen); + tc->tctx->dec_key_set = 1; + } + key_desc->dma_descr->buf = (char*)virt_to_phys(tc->tctx->dec_key); + key_desc->dma_descr->after = key_desc->dma_descr->buf + tc->tctx->init.keylen/8; + } else { + key_desc->dma_descr->buf = (char*)virt_to_phys(tc->tctx->init.key); + key_desc->dma_descr->after = key_desc->dma_descr->buf + tc->tctx->init.keylen/8; + } + /* Setup metadata. */ + mo.dlkey = 1; + switch (tc->tctx->init.keylen) { + case 64: + mo.decrypt = 0; + mo.hashmode = 0; + break; + case 128: + mo.decrypt = 0; + mo.hashmode = 1; + break; + case 192: + mo.decrypt = 1; + mo.hashmode = 0; + break; + case 256: + mo.decrypt = 1; + mo.hashmode = 1; + break; + default: + break; + } + mo.ciphsel = mo.hashsel = mo.csumsel = src_none; + key_desc->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_out, mo); + + key_desc->dma_descr->out_eop = 1; + key_desc->dma_descr->wait = 1; + key_desc->dma_descr->intr = 0; + + *kd = key_desc; + return 0; +} + +static int setup_cipher_iv_desc(struct cryptocop_tfrm_ctx *tc, struct cryptocop_dma_desc **id, int alloc_flag) +{ + struct cryptocop_dma_desc *iv_desc = alloc_cdesc(alloc_flag); + struct strcop_meta_out mo = {0}; + + DEBUG(printk("setup_cipher_iv_desc\n")); + + if (!iv_desc) { + DEBUG_API(printk("setup_cipher_iv_desc: failed CBC IV descriptor allocation.\n")); + return -ENOMEM; + } + /* Download IV. */ + iv_desc->dma_descr->buf = (char*)virt_to_phys(tc->tcfg->iv); + iv_desc->dma_descr->after = iv_desc->dma_descr->buf + tc->blocklength; + + /* Setup metadata. */ + mo.hashsel = mo.csumsel = src_none; + mo.ciphsel = src_dma; + mo.ciphconf = tc->ciph_conf; + mo.cbcmode = tc->cbcmode; + + iv_desc->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_out, mo); + + iv_desc->dma_descr->out_eop = 0; + iv_desc->dma_descr->wait = 1; + iv_desc->dma_descr->intr = 0; + + *id = iv_desc; + return 0; +} + +/* Map the ouput length of the transform to operation output starting on the inject index. */ +static int create_input_descriptors(struct cryptocop_operation *operation, struct cryptocop_tfrm_ctx *tc, struct cryptocop_dma_desc **id, int alloc_flag) +{ + int err = 0; + struct cryptocop_dma_desc head = {0}; + struct cryptocop_dma_desc *outdesc = &head; + size_t iov_offset = 0; + size_t out_ix = 0; + int outiov_ix = 0; + struct strcop_meta_in mi = {0}; + + size_t out_length = tc->produced; + int rem_length; + int dlength; + + assert(out_length != 0); + if (((tc->produced + tc->tcfg->inject_ix) > operation->tfrm_op.outlen) || (tc->produced && (operation->tfrm_op.outlen == 0))) { + DEBUG_API(printk("create_input_descriptors: operation outdata too small\n")); + return -EINVAL; + } + /* Traverse the out iovec until the result inject index is reached. */ + while ((outiov_ix < operation->tfrm_op.outcount) && ((out_ix + operation->tfrm_op.outdata[outiov_ix].iov_len) <= tc->tcfg->inject_ix)){ + out_ix += operation->tfrm_op.outdata[outiov_ix].iov_len; + outiov_ix++; + } + if (outiov_ix >= operation->tfrm_op.outcount){ + DEBUG_API(printk("create_input_descriptors: operation outdata too small\n")); + return -EINVAL; + } + iov_offset = tc->tcfg->inject_ix - out_ix; + mi.dmasel = tc->unit_no; + + /* Setup the output descriptors. */ + while ((out_length > 0) && (outiov_ix < operation->tfrm_op.outcount)) { + outdesc->next = alloc_cdesc(alloc_flag); + if (!outdesc->next) { + DEBUG_API(printk("create_input_descriptors: alloc_cdesc\n")); + err = -ENOMEM; + goto error_cleanup; + } + outdesc = outdesc->next; + rem_length = operation->tfrm_op.outdata[outiov_ix].iov_len - iov_offset; + dlength = (out_length < rem_length) ? out_length : rem_length; + + DEBUG(printk("create_input_descriptors:\n" + "outiov_ix=%d, rem_length=%d, dlength=%d\n" + "iov_offset=%d, outdata[outiov_ix].iov_len=%d\n" + "outcount=%d, outiov_ix=%d\n", + outiov_ix, rem_length, dlength, iov_offset, operation->tfrm_op.outdata[outiov_ix].iov_len, operation->tfrm_op.outcount, outiov_ix)); + + outdesc->dma_descr->buf = (char*)virt_to_phys(operation->tfrm_op.outdata[outiov_ix].iov_base + iov_offset); + outdesc->dma_descr->after = outdesc->dma_descr->buf + dlength; + outdesc->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_in, mi); + + out_length -= dlength; + iov_offset += dlength; + if (iov_offset >= operation->tfrm_op.outdata[outiov_ix].iov_len) { + iov_offset = 0; + ++outiov_ix; + } + } + if (out_length > 0){ + DEBUG_API(printk("create_input_descriptors: not enough room for output, %d remained\n", out_length)); + err = -EINVAL; + goto error_cleanup; + } + /* Set sync in last descriptor. */ + mi.sync = 1; + outdesc->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_in, mi); + + *id = head.next; + return 0; + + error_cleanup: + while (head.next) { + outdesc = head.next->next; + free_cdesc(head.next); + head.next = outdesc; + } + return err; +} + + +static int create_output_descriptors(struct cryptocop_operation *operation, int *iniov_ix, int *iniov_offset, size_t desc_len, struct cryptocop_dma_desc **current_out_cdesc, struct strcop_meta_out *meta_out, int alloc_flag) +{ + while (desc_len != 0) { + struct cryptocop_dma_desc *cdesc; + int rem_length = operation->tfrm_op.indata[*iniov_ix].iov_len - *iniov_offset; + int dlength = (desc_len < rem_length) ? desc_len : rem_length; + + cdesc = alloc_cdesc(alloc_flag); + if (!cdesc) { + DEBUG_API(printk("create_output_descriptors: alloc_cdesc\n")); + return -ENOMEM; + } + (*current_out_cdesc)->next = cdesc; + (*current_out_cdesc) = cdesc; + + cdesc->free_buf = NULL; + + cdesc->dma_descr->buf = (char*)virt_to_phys(operation->tfrm_op.indata[*iniov_ix].iov_base + *iniov_offset); + cdesc->dma_descr->after = cdesc->dma_descr->buf + dlength; + + desc_len -= dlength; + *iniov_offset += dlength; + assert(desc_len >= 0); + if (*iniov_offset >= operation->tfrm_op.indata[*iniov_ix].iov_len) { + *iniov_offset = 0; + ++(*iniov_ix); + if (*iniov_ix > operation->tfrm_op.incount) { + DEBUG_API(printk("create_output_descriptors: not enough indata in operation.")); + return -EINVAL; + } + } + cdesc->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_out, (*meta_out)); + } /* while (desc_len != 0) */ + /* Last DMA descriptor gets a 'wait' bit to signal expected change in metadata. */ + (*current_out_cdesc)->dma_descr->wait = 1; /* This will set extraneous WAIT in some situations, e.g. when padding hashes and checksums. */ + + return 0; +} + + +static int append_input_descriptors(struct cryptocop_operation *operation, struct cryptocop_dma_desc **current_in_cdesc, struct cryptocop_dma_desc **current_out_cdesc, struct cryptocop_tfrm_ctx *tc, int alloc_flag) +{ + DEBUG(printk("append_input_descriptors, tc=0x%p, unit_no=%d\n", tc, tc->unit_no)); + if (tc->tcfg) { + int failed = 0; + struct cryptocop_dma_desc *idescs = NULL; + DEBUG(printk("append_input_descriptors: pushing output, consumed %d produced %d bytes.\n", tc->consumed, tc->produced)); + if (tc->pad_descs) { + DEBUG(printk("append_input_descriptors: append pad descriptors to DMA out list.\n")); + while (tc->pad_descs) { + DEBUG(printk("append descriptor 0x%p\n", tc->pad_descs)); + (*current_out_cdesc)->next = tc->pad_descs; + tc->pad_descs = tc->pad_descs->next; + (*current_out_cdesc) = (*current_out_cdesc)->next; + } + } + + /* Setup and append output descriptors to DMA in list. */ + if (tc->unit_no == src_dma){ + /* mem2mem. Setup DMA in descriptors to discard all input prior to the requested mem2mem data. */ + struct strcop_meta_in mi = {.sync = 0, .dmasel = src_dma}; + unsigned int start_ix = tc->start_ix; + while (start_ix){ + unsigned int desclen = start_ix < MEM2MEM_DISCARD_BUF_LENGTH ? start_ix : MEM2MEM_DISCARD_BUF_LENGTH; + (*current_in_cdesc)->next = alloc_cdesc(alloc_flag); + if (!(*current_in_cdesc)->next){ + DEBUG_API(printk("append_input_descriptors: alloc_cdesc mem2mem discard failed\n")); + return -ENOMEM; + } + (*current_in_cdesc) = (*current_in_cdesc)->next; + (*current_in_cdesc)->dma_descr->buf = (char*)virt_to_phys(mem2mem_discard_buf); + (*current_in_cdesc)->dma_descr->after = (*current_in_cdesc)->dma_descr->buf + desclen; + (*current_in_cdesc)->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_in, mi); + start_ix -= desclen; + } + mi.sync = 1; + (*current_in_cdesc)->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_in, mi); + } + + failed = create_input_descriptors(operation, tc, &idescs, alloc_flag); + if (failed){ + DEBUG_API(printk("append_input_descriptors: output descriptor setup failed\n")); + return failed; + } + DEBUG(printk("append_input_descriptors: append output descriptors to DMA in list.\n")); + while (idescs) { + DEBUG(printk("append descriptor 0x%p\n", idescs)); + (*current_in_cdesc)->next = idescs; + idescs = idescs->next; + (*current_in_cdesc) = (*current_in_cdesc)->next; + } + } + return 0; +} + + + +static int cryptocop_setup_dma_list(struct cryptocop_operation *operation, struct cryptocop_int_operation **int_op, int alloc_flag) +{ + struct cryptocop_session *sess; + struct cryptocop_transform_ctx *tctx; + + struct cryptocop_tfrm_ctx digest_ctx = { + .previous_src = src_none, + .current_src = src_none, + .start_ix = 0, + .requires_padding = 1, + .strict_block_length = 0, + .hash_conf = 0, + .hash_mode = 0, + .ciph_conf = 0, + .cbcmode = 0, + .decrypt = 0, + .consumed = 0, + .produced = 0, + .pad_descs = NULL, + .active = 0, + .done = 0, + .prev_src = NULL, + .curr_src = NULL, + .tcfg = NULL}; + struct cryptocop_tfrm_ctx cipher_ctx = { + .previous_src = src_none, + .current_src = src_none, + .start_ix = 0, + .requires_padding = 0, + .strict_block_length = 1, + .hash_conf = 0, + .hash_mode = 0, + .ciph_conf = 0, + .cbcmode = 0, + .decrypt = 0, + .consumed = 0, + .produced = 0, + .pad_descs = NULL, + .active = 0, + .done = 0, + .prev_src = NULL, + .curr_src = NULL, + .tcfg = NULL}; + struct cryptocop_tfrm_ctx csum_ctx = { + .previous_src = src_none, + .current_src = src_none, + .start_ix = 0, + .blocklength = 2, + .requires_padding = 1, + .strict_block_length = 0, + .hash_conf = 0, + .hash_mode = 0, + .ciph_conf = 0, + .cbcmode = 0, + .decrypt = 0, + .consumed = 0, + .produced = 0, + .pad_descs = NULL, + .active = 0, + .done = 0, + .tcfg = NULL, + .prev_src = NULL, + .curr_src = NULL, + .unit_no = src_csum}; + struct cryptocop_tfrm_cfg *tcfg = operation->tfrm_op.tfrm_cfg; + + unsigned int indata_ix = 0; + + /* iovec accounting. */ + int iniov_ix = 0; + int iniov_offset = 0; + + /* Operation descriptor cfg traversal pointer. */ + struct cryptocop_desc *odsc; + + int failed = 0; + /* List heads for allocated descriptors. */ + struct cryptocop_dma_desc out_cdesc_head = {0}; + struct cryptocop_dma_desc in_cdesc_head = {0}; + + struct cryptocop_dma_desc *current_out_cdesc = &out_cdesc_head; + struct cryptocop_dma_desc *current_in_cdesc = &in_cdesc_head; + + struct cryptocop_tfrm_ctx *output_tc = NULL; + void *iop_alloc_ptr; + + assert(operation != NULL); + assert(int_op != NULL); + + DEBUG(printk("cryptocop_setup_dma_list: start\n")); + DEBUG(print_cryptocop_operation(operation)); + + sess = get_session(operation->sid); + if (!sess) { + DEBUG_API(printk("cryptocop_setup_dma_list: no session found for operation.\n")); + failed = -EINVAL; + goto error_cleanup; + } + iop_alloc_ptr = kmalloc(DESCR_ALLOC_PAD + sizeof(struct cryptocop_int_operation), alloc_flag); + if (!iop_alloc_ptr) { + DEBUG_API(printk("cryptocop_setup_dma_list: kmalloc cryptocop_int_operation\n")); + failed = -ENOMEM; + goto error_cleanup; + } + (*int_op) = (struct cryptocop_int_operation*)(((unsigned long int)(iop_alloc_ptr + DESCR_ALLOC_PAD + offsetof(struct cryptocop_int_operation, ctx_out)) & ~0x0000001F) - offsetof(struct cryptocop_int_operation, ctx_out)); + DEBUG(memset((*int_op), 0xff, sizeof(struct cryptocop_int_operation))); + (*int_op)->alloc_ptr = iop_alloc_ptr; + DEBUG(printk("cryptocop_setup_dma_list: *int_op=0x%p, alloc_ptr=0x%p\n", *int_op, (*int_op)->alloc_ptr)); + + (*int_op)->sid = operation->sid; + (*int_op)->cdesc_out = NULL; + (*int_op)->cdesc_in = NULL; + (*int_op)->tdes_mode = cryptocop_3des_ede; + (*int_op)->csum_mode = cryptocop_csum_le; + (*int_op)->ddesc_out = NULL; + (*int_op)->ddesc_in = NULL; + + /* Scan operation->tfrm_op.tfrm_cfg for bad configuration and set up the local contexts. */ + if (!tcfg) { + DEBUG_API(printk("cryptocop_setup_dma_list: no configured transforms in operation.\n")); + failed = -EINVAL; + goto error_cleanup; + } + while (tcfg) { + tctx = get_transform_ctx(sess, tcfg->tid); + if (!tctx) { + DEBUG_API(printk("cryptocop_setup_dma_list: no transform id %d in session.\n", tcfg->tid)); + failed = -EINVAL; + goto error_cleanup; + } + if (tcfg->inject_ix > operation->tfrm_op.outlen){ + DEBUG_API(printk("cryptocop_setup_dma_list: transform id %d inject_ix (%d) > operation->tfrm_op.outlen(%d)", tcfg->tid, tcfg->inject_ix, operation->tfrm_op.outlen)); + failed = -EINVAL; + goto error_cleanup; + } + switch (tctx->init.alg){ + case cryptocop_alg_mem2mem: + if (cipher_ctx.tcfg != NULL){ + DEBUG_API(printk("cryptocop_setup_dma_list: multiple ciphers in operation.\n")); + failed = -EINVAL; + goto error_cleanup; + } + /* mem2mem is handled as a NULL cipher. */ + cipher_ctx.cbcmode = 0; + cipher_ctx.decrypt = 0; + cipher_ctx.blocklength = 1; + cipher_ctx.ciph_conf = 0; + cipher_ctx.unit_no = src_dma; + cipher_ctx.tcfg = tcfg; + cipher_ctx.tctx = tctx; + break; + case cryptocop_alg_des: + case cryptocop_alg_3des: + case cryptocop_alg_aes: + /* cipher */ + if (cipher_ctx.tcfg != NULL){ + DEBUG_API(printk("cryptocop_setup_dma_list: multiple ciphers in operation.\n")); + failed = -EINVAL; + goto error_cleanup; + } + cipher_ctx.tcfg = tcfg; + cipher_ctx.tctx = tctx; + if (cipher_ctx.tcfg->flags & CRYPTOCOP_DECRYPT){ + cipher_ctx.decrypt = 1; + } + switch (tctx->init.cipher_mode) { + case cryptocop_cipher_mode_ecb: + cipher_ctx.cbcmode = 0; + break; + case cryptocop_cipher_mode_cbc: + cipher_ctx.cbcmode = 1; + break; + default: + DEBUG_API(printk("cryptocop_setup_dma_list: cipher_ctx, bad cipher mode==%d\n", tctx->init.cipher_mode)); + failed = -EINVAL; + goto error_cleanup; + } + DEBUG(printk("cryptocop_setup_dma_list: cipher_ctx, set CBC mode==%d\n", cipher_ctx.cbcmode)); + switch (tctx->init.alg){ + case cryptocop_alg_des: + cipher_ctx.ciph_conf = 0; + cipher_ctx.unit_no = src_des; + cipher_ctx.blocklength = DES_BLOCK_LENGTH; + break; + case cryptocop_alg_3des: + cipher_ctx.ciph_conf = 1; + cipher_ctx.unit_no = src_des; + cipher_ctx.blocklength = DES_BLOCK_LENGTH; + break; + case cryptocop_alg_aes: + cipher_ctx.ciph_conf = 2; + cipher_ctx.unit_no = src_aes; + cipher_ctx.blocklength = AES_BLOCK_LENGTH; + break; + default: + panic("cryptocop_setup_dma_list: impossible algorithm %d\n", tctx->init.alg); + } + (*int_op)->tdes_mode = tctx->init.tdes_mode; + break; + case cryptocop_alg_md5: + case cryptocop_alg_sha1: + /* digest */ + if (digest_ctx.tcfg != NULL){ + DEBUG_API(printk("cryptocop_setup_dma_list: multiple digests in operation.\n")); + failed = -EINVAL; + goto error_cleanup; + } + digest_ctx.tcfg = tcfg; + digest_ctx.tctx = tctx; + digest_ctx.hash_mode = 0; /* Don't use explicit IV in this API. */ + switch (tctx->init.alg){ + case cryptocop_alg_md5: + digest_ctx.blocklength = MD5_BLOCK_LENGTH; + digest_ctx.unit_no = src_md5; + digest_ctx.hash_conf = 1; /* 1 => MD-5 */ + break; + case cryptocop_alg_sha1: + digest_ctx.blocklength = SHA1_BLOCK_LENGTH; + digest_ctx.unit_no = src_sha1; + digest_ctx.hash_conf = 0; /* 0 => SHA-1 */ + break; + default: + panic("cryptocop_setup_dma_list: impossible digest algorithm\n"); + } + break; + case cryptocop_alg_csum: + /* digest */ + if (csum_ctx.tcfg != NULL){ + DEBUG_API(printk("cryptocop_setup_dma_list: multiple checksums in operation.\n")); + failed = -EINVAL; + goto error_cleanup; + } + (*int_op)->csum_mode = tctx->init.csum_mode; + csum_ctx.tcfg = tcfg; + csum_ctx.tctx = tctx; + break; + default: + /* no algorithm. */ + DEBUG_API(printk("cryptocop_setup_dma_list: invalid algorithm %d specified in tfrm %d.\n", tctx->init.alg, tcfg->tid)); + failed = -EINVAL; + goto error_cleanup; + } + tcfg = tcfg->next; + } + /* Download key if a cipher is used. */ + if (cipher_ctx.tcfg && (cipher_ctx.tctx->init.alg != cryptocop_alg_mem2mem)){ + struct cryptocop_dma_desc *key_desc = NULL; + + failed = setup_key_dl_desc(&cipher_ctx, &key_desc, alloc_flag); + if (failed) { + DEBUG_API(printk("cryptocop_setup_dma_list: setup key dl\n")); + goto error_cleanup; + } + current_out_cdesc->next = key_desc; + current_out_cdesc = key_desc; + indata_ix += (unsigned int)(key_desc->dma_descr->after - key_desc->dma_descr->buf); + + /* Download explicit IV if a cipher is used and CBC mode and explicit IV selected. */ + if ((cipher_ctx.tctx->init.cipher_mode == cryptocop_cipher_mode_cbc) && (cipher_ctx.tcfg->flags & CRYPTOCOP_EXPLICIT_IV)) { + struct cryptocop_dma_desc *iv_desc = NULL; + + DEBUG(printk("cryptocop_setup_dma_list: setup cipher CBC IV descriptor.\n")); + + failed = setup_cipher_iv_desc(&cipher_ctx, &iv_desc, alloc_flag); + if (failed) { + DEBUG_API(printk("cryptocop_setup_dma_list: CBC IV descriptor.\n")); + goto error_cleanup; + } + current_out_cdesc->next = iv_desc; + current_out_cdesc = iv_desc; + indata_ix += (unsigned int)(iv_desc->dma_descr->after - iv_desc->dma_descr->buf); + } + } + + /* Process descriptors. */ + odsc = operation->tfrm_op.desc; + while (odsc) { + struct cryptocop_desc_cfg *dcfg = odsc->cfg; + struct strcop_meta_out meta_out = {0}; + size_t desc_len = odsc->length; + int active_count, eop_needed_count; + + output_tc = NULL; + + DEBUG(printk("cryptocop_setup_dma_list: parsing an operation descriptor\n")); + + while (dcfg) { + struct cryptocop_tfrm_ctx *tc = NULL; + + DEBUG(printk("cryptocop_setup_dma_list: parsing an operation descriptor configuration.\n")); + /* Get the local context for the transform and mark it as the output unit if it produces output. */ + if (digest_ctx.tcfg && (digest_ctx.tcfg->tid == dcfg->tid)){ + tc = &digest_ctx; + } else if (cipher_ctx.tcfg && (cipher_ctx.tcfg->tid == dcfg->tid)){ + tc = &cipher_ctx; + } else if (csum_ctx.tcfg && (csum_ctx.tcfg->tid == dcfg->tid)){ + tc = &csum_ctx; + } + if (!tc) { + DEBUG_API(printk("cryptocop_setup_dma_list: invalid transform %d specified in descriptor.\n", dcfg->tid)); + failed = -EINVAL; + goto error_cleanup; + } + if (tc->done) { + DEBUG_API(printk("cryptocop_setup_dma_list: completed transform %d reused.\n", dcfg->tid)); + failed = -EINVAL; + goto error_cleanup; + } + if (!tc->active) { + tc->start_ix = indata_ix; + tc->active = 1; + } + + tc->previous_src = tc->current_src; + tc->prev_src = tc->curr_src; + /* Map source unit id to DMA source config. */ + switch (dcfg->src){ + case cryptocop_source_dma: + tc->current_src = src_dma; + break; + case cryptocop_source_des: + tc->current_src = src_des; + break; + case cryptocop_source_3des: + tc->current_src = src_des; + break; + case cryptocop_source_aes: + tc->current_src = src_aes; + break; + case cryptocop_source_md5: + case cryptocop_source_sha1: + case cryptocop_source_csum: + case cryptocop_source_none: + default: + /* We do not allow using accumulating style units (SHA-1, MD5, checksum) as sources to other units. + */ + DEBUG_API(printk("cryptocop_setup_dma_list: bad unit source configured %d.\n", dcfg->src)); + failed = -EINVAL; + goto error_cleanup; + } + if (tc->current_src != src_dma) { + /* Find the unit we are sourcing from. */ + if (digest_ctx.unit_no == tc->current_src){ + tc->curr_src = &digest_ctx; + } else if (cipher_ctx.unit_no == tc->current_src){ + tc->curr_src = &cipher_ctx; + } else if (csum_ctx.unit_no == tc->current_src){ + tc->curr_src = &csum_ctx; + } + if ((tc->curr_src == tc) && (tc->unit_no != src_dma)){ + DEBUG_API(printk("cryptocop_setup_dma_list: unit %d configured to source from itself.\n", tc->unit_no)); + failed = -EINVAL; + goto error_cleanup; + } + } else { + tc->curr_src = NULL; + } + + /* Detect source switch. */ + DEBUG(printk("cryptocop_setup_dma_list: tc->active=%d tc->unit_no=%d tc->current_src=%d tc->previous_src=%d, tc->curr_src=0x%p, tc->prev_srv=0x%p\n", tc->active, tc->unit_no, tc->current_src, tc->previous_src, tc->curr_src, tc->prev_src)); + if (tc->active && (tc->current_src != tc->previous_src)) { + /* Only allow source switch when both the old source unit and the new one have + * no pending data to process (i.e. the consumed length must be a multiple of the + * transform blocklength). */ + /* Note: if the src == NULL we are actually sourcing from DMA out. */ + if (((tc->prev_src != NULL) && (tc->prev_src->consumed % tc->prev_src->blocklength)) || + ((tc->curr_src != NULL) && (tc->curr_src->consumed % tc->curr_src->blocklength))) + { + DEBUG_API(printk("cryptocop_setup_dma_list: can only disconnect from or connect to a unit on a multiple of the blocklength, old: cons=%d, prod=%d, block=%d, new: cons=%d prod=%d, block=%d.\n", tc->prev_src ? tc->prev_src->consumed : INT_MIN, tc->prev_src ? tc->prev_src->produced : INT_MIN, tc->prev_src ? tc->prev_src->blocklength : INT_MIN, tc->curr_src ? tc->curr_src->consumed : INT_MIN, tc->curr_src ? tc->curr_src->produced : INT_MIN, tc->curr_src ? tc->curr_src->blocklength : INT_MIN)); + failed = -EINVAL; + goto error_cleanup; + } + } + /* Detect unit deactivation. */ + if (dcfg->last) { + /* Length check of this is handled below. */ + tc->done = 1; + } + dcfg = dcfg->next; + } /* while (dcfg) */ + DEBUG(printk("cryptocop_setup_dma_list: parsing operation descriptor configuration complete.\n")); + + if (cipher_ctx.active && (cipher_ctx.curr_src != NULL) && !cipher_ctx.curr_src->active){ + DEBUG_API(printk("cryptocop_setup_dma_list: cipher source from inactive unit %d\n", cipher_ctx.curr_src->unit_no)); + failed = -EINVAL; + goto error_cleanup; + } + if (digest_ctx.active && (digest_ctx.curr_src != NULL) && !digest_ctx.curr_src->active){ + DEBUG_API(printk("cryptocop_setup_dma_list: digest source from inactive unit %d\n", digest_ctx.curr_src->unit_no)); + failed = -EINVAL; + goto error_cleanup; + } + if (csum_ctx.active && (csum_ctx.curr_src != NULL) && !csum_ctx.curr_src->active){ + DEBUG_API(printk("cryptocop_setup_dma_list: cipher source from inactive unit %d\n", csum_ctx.curr_src->unit_no)); + failed = -EINVAL; + goto error_cleanup; + } + + /* Update consumed and produced lengths. + + The consumed length accounting here is actually cheating. If a unit source from DMA (or any + other unit that process data in blocks of one octet) it is correct, but if it source from a + block processing unit, i.e. a cipher, it will be temporarily incorrect at some times. However + since it is only allowed--by the HW--to change source to or from a block processing unit at times where that + unit has processed an exact multiple of its block length the end result will be correct. + Beware that if the source change restriction change this code will need to be (much) reworked. + */ + DEBUG(printk("cryptocop_setup_dma_list: desc->length=%d, desc_len=%d.\n", odsc->length, desc_len)); + + if (csum_ctx.active) { + csum_ctx.consumed += desc_len; + if (csum_ctx.done) { + csum_ctx.produced = 2; + } + DEBUG(printk("cryptocop_setup_dma_list: csum_ctx producing: consumed=%d, produced=%d, blocklength=%d.\n", csum_ctx.consumed, csum_ctx.produced, csum_ctx.blocklength)); + } + if (digest_ctx.active) { + digest_ctx.consumed += desc_len; + if (digest_ctx.done) { + if (digest_ctx.unit_no == src_md5) { + digest_ctx.produced = MD5_STATE_LENGTH; + } else { + digest_ctx.produced = SHA1_STATE_LENGTH; + } + } + DEBUG(printk("cryptocop_setup_dma_list: digest_ctx producing: consumed=%d, produced=%d, blocklength=%d.\n", digest_ctx.consumed, digest_ctx.produced, digest_ctx.blocklength)); + } + if (cipher_ctx.active) { + /* Ciphers are allowed only to source from DMA out. That is filtered above. */ + assert(cipher_ctx.current_src == src_dma); + cipher_ctx.consumed += desc_len; + cipher_ctx.produced = cipher_ctx.blocklength * (cipher_ctx.consumed / cipher_ctx.blocklength); + if (cipher_ctx.cbcmode && !(cipher_ctx.tcfg->flags & CRYPTOCOP_EXPLICIT_IV) && cipher_ctx.produced){ + cipher_ctx.produced -= cipher_ctx.blocklength; /* Compensate for CBC iv. */ + } + DEBUG(printk("cryptocop_setup_dma_list: cipher_ctx producing: consumed=%d, produced=%d, blocklength=%d.\n", cipher_ctx.consumed, cipher_ctx.produced, cipher_ctx.blocklength)); + } + + /* Setup the DMA out descriptors. */ + /* Configure the metadata. */ + active_count = 0; + eop_needed_count = 0; + if (cipher_ctx.active) { + ++active_count; + if (cipher_ctx.unit_no == src_dma){ + /* mem2mem */ + meta_out.ciphsel = src_none; + } else { + meta_out.ciphsel = cipher_ctx.current_src; + } + meta_out.ciphconf = cipher_ctx.ciph_conf; + meta_out.cbcmode = cipher_ctx.cbcmode; + meta_out.decrypt = cipher_ctx.decrypt; + DEBUG(printk("set ciphsel=%d ciphconf=%d cbcmode=%d decrypt=%d\n", meta_out.ciphsel, meta_out.ciphconf, meta_out.cbcmode, meta_out.decrypt)); + if (cipher_ctx.done) ++eop_needed_count; + } else { + meta_out.ciphsel = src_none; + } + + if (digest_ctx.active) { + ++active_count; + meta_out.hashsel = digest_ctx.current_src; + meta_out.hashconf = digest_ctx.hash_conf; + meta_out.hashmode = 0; /* Explicit mode is not used here. */ + DEBUG(printk("set hashsel=%d hashconf=%d hashmode=%d\n", meta_out.hashsel, meta_out.hashconf, meta_out.hashmode)); + if (digest_ctx.done) { + assert(digest_ctx.pad_descs == NULL); + failed = create_pad_descriptor(&digest_ctx, &digest_ctx.pad_descs, alloc_flag); + if (failed) { + DEBUG_API(printk("cryptocop_setup_dma_list: failed digest pad creation.\n")); + goto error_cleanup; + } + } + } else { + meta_out.hashsel = src_none; + } + + if (csum_ctx.active) { + ++active_count; + meta_out.csumsel = csum_ctx.current_src; + if (csum_ctx.done) { + assert(csum_ctx.pad_descs == NULL); + failed = create_pad_descriptor(&csum_ctx, &csum_ctx.pad_descs, alloc_flag); + if (failed) { + DEBUG_API(printk("cryptocop_setup_dma_list: failed csum pad creation.\n")); + goto error_cleanup; + } + } + } else { + meta_out.csumsel = src_none; + } + DEBUG(printk("cryptocop_setup_dma_list: %d eop needed, %d active units\n", eop_needed_count, active_count)); + /* Setup DMA out descriptors for the indata. */ + failed = create_output_descriptors(operation, &iniov_ix, &iniov_offset, desc_len, ¤t_out_cdesc, &meta_out, alloc_flag); + if (failed) { + DEBUG_API(printk("cryptocop_setup_dma_list: create_output_descriptors %d\n", failed)); + goto error_cleanup; + } + /* Setup out EOP. If there are active units that are not done here they cannot get an EOP + * so we ust setup a zero length descriptor to DMA to signal EOP only to done units. + * If there is a pad descriptor EOP for the padded unit will be EOPed by it. + */ + assert(active_count >= eop_needed_count); + assert((eop_needed_count == 0) || (eop_needed_count == 1)); + if (eop_needed_count) { + /* This means that the bulk operation (cipeher/m2m) is terminated. */ + if (active_count > 1) { + /* Use zero length EOP descriptor. */ + struct cryptocop_dma_desc *ed = alloc_cdesc(alloc_flag); + struct strcop_meta_out ed_mo = {0}; + if (!ed) { + DEBUG_API(printk("cryptocop_setup_dma_list: alloc EOP descriptor for cipher\n")); + failed = -ENOMEM; + goto error_cleanup; + } + + assert(cipher_ctx.active && cipher_ctx.done); + + if (cipher_ctx.unit_no == src_dma){ + /* mem2mem */ + ed_mo.ciphsel = src_none; + } else { + ed_mo.ciphsel = cipher_ctx.current_src; + } + ed_mo.ciphconf = cipher_ctx.ciph_conf; + ed_mo.cbcmode = cipher_ctx.cbcmode; + ed_mo.decrypt = cipher_ctx.decrypt; + + ed->free_buf = NULL; + ed->dma_descr->wait = 1; + ed->dma_descr->out_eop = 1; + + ed->dma_descr->buf = (char*)virt_to_phys(&ed); /* Use any valid physical address for zero length descriptor. */ + ed->dma_descr->after = ed->dma_descr->buf; + ed->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_out, ed_mo); + current_out_cdesc->next = ed; + current_out_cdesc = ed; + } else { + /* Set EOP in the current out descriptor since the only active module is + * the one needing the EOP. */ + + current_out_cdesc->dma_descr->out_eop = 1; + } + } + + if (cipher_ctx.done && cipher_ctx.active) cipher_ctx.active = 0; + if (digest_ctx.done && digest_ctx.active) digest_ctx.active = 0; + if (csum_ctx.done && csum_ctx.active) csum_ctx.active = 0; + indata_ix += odsc->length; + odsc = odsc->next; + } /* while (odsc) */ /* Process descriptors. */ + DEBUG(printk("cryptocop_setup_dma_list: done parsing operation descriptors\n")); + if (cipher_ctx.tcfg && (cipher_ctx.active || !cipher_ctx.done)){ + DEBUG_API(printk("cryptocop_setup_dma_list: cipher operation not terminated.\n")); + failed = -EINVAL; + goto error_cleanup; + } + if (digest_ctx.tcfg && (digest_ctx.active || !digest_ctx.done)){ + DEBUG_API(printk("cryptocop_setup_dma_list: digest operation not terminated.\n")); + failed = -EINVAL; + goto error_cleanup; + } + if (csum_ctx.tcfg && (csum_ctx.active || !csum_ctx.done)){ + DEBUG_API(printk("cryptocop_setup_dma_list: csum operation not terminated.\n")); + failed = -EINVAL; + goto error_cleanup; + } + + failed = append_input_descriptors(operation, ¤t_in_cdesc, ¤t_out_cdesc, &cipher_ctx, alloc_flag); + if (failed){ + DEBUG_API(printk("cryptocop_setup_dma_list: append_input_descriptors cipher_ctx %d\n", failed)); + goto error_cleanup; + } + failed = append_input_descriptors(operation, ¤t_in_cdesc, ¤t_out_cdesc, &digest_ctx, alloc_flag); + if (failed){ + DEBUG_API(printk("cryptocop_setup_dma_list: append_input_descriptors cipher_ctx %d\n", failed)); + goto error_cleanup; + } + failed = append_input_descriptors(operation, ¤t_in_cdesc, ¤t_out_cdesc, &csum_ctx, alloc_flag); + if (failed){ + DEBUG_API(printk("cryptocop_setup_dma_list: append_input_descriptors cipher_ctx %d\n", failed)); + goto error_cleanup; + } + + DEBUG(printk("cryptocop_setup_dma_list: int_op=0x%p, *int_op=0x%p\n", int_op, *int_op)); + (*int_op)->cdesc_out = out_cdesc_head.next; + (*int_op)->cdesc_in = in_cdesc_head.next; + DEBUG(printk("cryptocop_setup_dma_list: out_cdesc_head=0x%p in_cdesc_head=0x%p\n", (*int_op)->cdesc_out, (*int_op)->cdesc_in)); + + setup_descr_chain(out_cdesc_head.next); + setup_descr_chain(in_cdesc_head.next); + + /* Last but not least: mark the last DMA in descriptor for a INTR and EOL and the the + * last DMA out descriptor for EOL. + */ + current_in_cdesc->dma_descr->intr = 1; + current_in_cdesc->dma_descr->eol = 1; + current_out_cdesc->dma_descr->eol = 1; + + /* Setup DMA contexts. */ + (*int_op)->ctx_out.next = NULL; + (*int_op)->ctx_out.eol = 1; + (*int_op)->ctx_out.intr = 0; + (*int_op)->ctx_out.store_mode = 0; + (*int_op)->ctx_out.en = 0; + (*int_op)->ctx_out.dis = 0; + (*int_op)->ctx_out.md0 = 0; + (*int_op)->ctx_out.md1 = 0; + (*int_op)->ctx_out.md2 = 0; + (*int_op)->ctx_out.md3 = 0; + (*int_op)->ctx_out.md4 = 0; + (*int_op)->ctx_out.saved_data = (dma_descr_data*)virt_to_phys((*int_op)->cdesc_out->dma_descr); + (*int_op)->ctx_out.saved_data_buf = (*int_op)->cdesc_out->dma_descr->buf; /* Already physical address. */ + + (*int_op)->ctx_in.next = NULL; + (*int_op)->ctx_in.eol = 1; + (*int_op)->ctx_in.intr = 0; + (*int_op)->ctx_in.store_mode = 0; + (*int_op)->ctx_in.en = 0; + (*int_op)->ctx_in.dis = 0; + (*int_op)->ctx_in.md0 = 0; + (*int_op)->ctx_in.md1 = 0; + (*int_op)->ctx_in.md2 = 0; + (*int_op)->ctx_in.md3 = 0; + (*int_op)->ctx_in.md4 = 0; + + (*int_op)->ctx_in.saved_data = (dma_descr_data*)virt_to_phys((*int_op)->cdesc_in->dma_descr); + (*int_op)->ctx_in.saved_data_buf = (*int_op)->cdesc_in->dma_descr->buf; /* Already physical address. */ + + DEBUG(printk("cryptocop_setup_dma_list: done\n")); + return 0; + +error_cleanup: + { + /* Free all allocated resources. */ + struct cryptocop_dma_desc *tmp_cdesc; + while (digest_ctx.pad_descs){ + tmp_cdesc = digest_ctx.pad_descs->next; + free_cdesc(digest_ctx.pad_descs); + digest_ctx.pad_descs = tmp_cdesc; + } + while (csum_ctx.pad_descs){ + tmp_cdesc = csum_ctx.pad_descs->next; + free_cdesc(csum_ctx.pad_descs); + csum_ctx.pad_descs = tmp_cdesc; + } + assert(cipher_ctx.pad_descs == NULL); /* The ciphers are never padded. */ + + if (*int_op != NULL) delete_internal_operation(*int_op); + } + DEBUG_API(printk("cryptocop_setup_dma_list: done with error %d\n", failed)); + return failed; +} + + +static void delete_internal_operation(struct cryptocop_int_operation *iop) +{ + void *ptr = iop->alloc_ptr; + struct cryptocop_dma_desc *cd = iop->cdesc_out; + struct cryptocop_dma_desc *next; + + DEBUG(printk("delete_internal_operation: iop=0x%p, alloc_ptr=0x%p\n", iop, ptr)); + + while (cd) { + next = cd->next; + free_cdesc(cd); + cd = next; + } + cd = iop->cdesc_in; + while (cd) { + next = cd->next; + free_cdesc(cd); + cd = next; + } + kfree(ptr); +} + +#define MD5_MIN_PAD_LENGTH (9) +#define MD5_PAD_LENGTH_FIELD_LENGTH (8) + +static int create_md5_pad(int alloc_flag, unsigned long long hashed_length, char **pad, size_t *pad_length) +{ + size_t padlen = MD5_BLOCK_LENGTH - (hashed_length % MD5_BLOCK_LENGTH); + unsigned char *p; + int i; + unsigned long long int bit_length = hashed_length << 3; + + if (padlen < MD5_MIN_PAD_LENGTH) padlen += MD5_BLOCK_LENGTH; + + p = kmalloc(padlen, alloc_flag); + if (!pad) return -ENOMEM; + + *p = 0x80; + memset(p+1, 0, padlen - 1); + + DEBUG(printk("create_md5_pad: hashed_length=%lld bits == %lld bytes\n", bit_length, hashed_length)); + + i = padlen - MD5_PAD_LENGTH_FIELD_LENGTH; + while (bit_length != 0){ + p[i++] = bit_length % 0x100; + bit_length >>= 8; + } + + *pad = (char*)p; + *pad_length = padlen; + + return 0; +} + +#define SHA1_MIN_PAD_LENGTH (9) +#define SHA1_PAD_LENGTH_FIELD_LENGTH (8) + +static int create_sha1_pad(int alloc_flag, unsigned long long hashed_length, char **pad, size_t *pad_length) +{ + size_t padlen = SHA1_BLOCK_LENGTH - (hashed_length % SHA1_BLOCK_LENGTH); + unsigned char *p; + int i; + unsigned long long int bit_length = hashed_length << 3; + + if (padlen < SHA1_MIN_PAD_LENGTH) padlen += SHA1_BLOCK_LENGTH; + + p = kmalloc(padlen, alloc_flag); + if (!pad) return -ENOMEM; + + *p = 0x80; + memset(p+1, 0, padlen - 1); + + DEBUG(printk("create_sha1_pad: hashed_length=%lld bits == %lld bytes\n", bit_length, hashed_length)); + + i = padlen - 1; + while (bit_length != 0){ + p[i--] = bit_length % 0x100; + bit_length >>= 8; + } + + *pad = (char*)p; + *pad_length = padlen; + + return 0; +} + + +static int transform_ok(struct cryptocop_transform_init *tinit) +{ + switch (tinit->alg){ + case cryptocop_alg_csum: + switch (tinit->csum_mode){ + case cryptocop_csum_le: + case cryptocop_csum_be: + break; + default: + DEBUG_API(printk("transform_ok: Bad mode set for csum transform\n")); + return -EINVAL; + } + case cryptocop_alg_mem2mem: + case cryptocop_alg_md5: + case cryptocop_alg_sha1: + if (tinit->keylen != 0) { + DEBUG_API(printk("transform_ok: non-zero keylength, %d, for a digest/csum algorithm\n", tinit->keylen)); + return -EINVAL; /* This check is a bit strict. */ + } + break; + case cryptocop_alg_des: + if (tinit->keylen != 64) { + DEBUG_API(printk("transform_ok: keylen %d invalid for DES\n", tinit->keylen)); + return -EINVAL; + } + break; + case cryptocop_alg_3des: + if (tinit->keylen != 192) { + DEBUG_API(printk("transform_ok: keylen %d invalid for 3DES\n", tinit->keylen)); + return -EINVAL; + } + break; + case cryptocop_alg_aes: + if (tinit->keylen != 128 && tinit->keylen != 192 && tinit->keylen != 256) { + DEBUG_API(printk("transform_ok: keylen %d invalid for AES\n", tinit->keylen)); + return -EINVAL; + } + break; + case cryptocop_no_alg: + default: + DEBUG_API(printk("transform_ok: no such algorithm %d\n", tinit->alg)); + return -EINVAL; + } + + switch (tinit->alg){ + case cryptocop_alg_des: + case cryptocop_alg_3des: + case cryptocop_alg_aes: + if (tinit->cipher_mode != cryptocop_cipher_mode_ecb && tinit->cipher_mode != cryptocop_cipher_mode_cbc) return -EINVAL; + default: + break; + } + return 0; +} + + +int cryptocop_new_session(cryptocop_session_id *sid, struct cryptocop_transform_init *tinit, int alloc_flag) +{ + struct cryptocop_session *sess; + struct cryptocop_transform_init *tfrm_in = tinit; + struct cryptocop_transform_init *tmp_in; + int no_tfrms = 0; + int i; + unsigned long int flags; + + init_stream_coprocessor(); /* For safety if we are called early */ + + while (tfrm_in){ + int err; + ++no_tfrms; + if ((err = transform_ok(tfrm_in))) { + DEBUG_API(printk("cryptocop_new_session, bad transform\n")); + return err; + } + tfrm_in = tfrm_in->next; + } + if (0 == no_tfrms) { + DEBUG_API(printk("cryptocop_new_session, no transforms specified\n")); + return -EINVAL; + } + + sess = kmalloc(sizeof(struct cryptocop_session), alloc_flag); + if (!sess){ + DEBUG_API(printk("cryptocop_new_session, kmalloc cryptocop_session\n")); + return -ENOMEM; + } + + sess->tfrm_ctx = kmalloc(no_tfrms * sizeof(struct cryptocop_transform_ctx), alloc_flag); + if (!sess->tfrm_ctx) { + DEBUG_API(printk("cryptocop_new_session, kmalloc cryptocop_transform_ctx\n")); + kfree(sess); + return -ENOMEM; + } + + tfrm_in = tinit; + for (i = 0; i < no_tfrms; i++){ + tmp_in = tfrm_in->next; + while (tmp_in){ + if (tmp_in->tid == tfrm_in->tid) { + DEBUG_API(printk("cryptocop_new_session, duplicate transform ids\n")); + kfree(sess->tfrm_ctx); + kfree(sess); + return -EINVAL; + } + tmp_in = tmp_in->next; + } + memcpy(&sess->tfrm_ctx[i].init, tfrm_in, sizeof(struct cryptocop_transform_init)); + sess->tfrm_ctx[i].dec_key_set = 0; + sess->tfrm_ctx[i].next = &sess->tfrm_ctx[i] + 1; + + tfrm_in = tfrm_in->next; + } + sess->tfrm_ctx[i-1].next = NULL; + + spin_lock_irqsave(&cryptocop_sessions_lock, flags); + sess->sid = next_sid; + next_sid++; + /* TODO If we are really paranoid we should do duplicate check to handle sid wraparound. + * OTOH 2^64 is a really large number of session. */ + if (next_sid == 0) next_sid = 1; + + /* Prepend to session list. */ + sess->next = cryptocop_sessions; + cryptocop_sessions = sess; + spin_unlock_irqrestore(&cryptocop_sessions_lock, flags); + *sid = sess->sid; + return 0; +} + + +int cryptocop_free_session(cryptocop_session_id sid) +{ + struct cryptocop_transform_ctx *tc; + struct cryptocop_session *sess = NULL; + struct cryptocop_session *psess = NULL; + unsigned long int flags; + int i; + LIST_HEAD(remove_list); + struct list_head *node, *tmp; + struct cryptocop_prio_job *pj; + + DEBUG(printk("cryptocop_free_session: sid=%lld\n", sid)); + + spin_lock_irqsave(&cryptocop_sessions_lock, flags); + sess = cryptocop_sessions; + while (sess && sess->sid != sid){ + psess = sess; + sess = sess->next; + } + if (sess){ + if (psess){ + psess->next = sess->next; + } else { + cryptocop_sessions = sess->next; + } + } + spin_unlock_irqrestore(&cryptocop_sessions_lock, flags); + + if (!sess) return -EINVAL; + + /* Remove queued jobs. */ + spin_lock_irqsave(&cryptocop_job_queue_lock, flags); + + for (i = 0; i < cryptocop_prio_no_prios; i++){ + if (!list_empty(&(cryptocop_job_queues[i].jobs))){ + list_for_each_safe(node, tmp, &(cryptocop_job_queues[i].jobs)) { + pj = list_entry(node, struct cryptocop_prio_job, node); + if (pj->oper->sid == sid) { + list_move_tail(node, &remove_list); + } + } + } + } + spin_unlock_irqrestore(&cryptocop_job_queue_lock, flags); + + list_for_each_safe(node, tmp, &remove_list) { + list_del(node); + pj = list_entry(node, struct cryptocop_prio_job, node); + pj->oper->operation_status = -EAGAIN; /* EAGAIN is not ideal for job/session terminated but it's the best choice I know of. */ + DEBUG(printk("cryptocop_free_session: pj=0x%p, pj->oper=0x%p, pj->iop=0x%p\n", pj, pj->oper, pj->iop)); + pj->oper->cb(pj->oper, pj->oper->cb_data); + delete_internal_operation(pj->iop); + kfree(pj); + } + + tc = sess->tfrm_ctx; + /* Erase keying data. */ + while (tc){ + DEBUG(printk("cryptocop_free_session: memset keys, tfrm id=%d\n", tc->init.tid)); + memset(tc->init.key, 0xff, CRYPTOCOP_MAX_KEY_LENGTH); + memset(tc->dec_key, 0xff, CRYPTOCOP_MAX_KEY_LENGTH); + tc = tc->next; + } + kfree(sess->tfrm_ctx); + kfree(sess); + + return 0; +} + +static struct cryptocop_session *get_session(cryptocop_session_id sid) +{ + struct cryptocop_session *sess; + unsigned long int flags; + + spin_lock_irqsave(&cryptocop_sessions_lock, flags); + sess = cryptocop_sessions; + while (sess && (sess->sid != sid)){ + sess = sess->next; + } + spin_unlock_irqrestore(&cryptocop_sessions_lock, flags); + + return sess; +} + +static struct cryptocop_transform_ctx *get_transform_ctx(struct cryptocop_session *sess, cryptocop_tfrm_id tid) +{ + struct cryptocop_transform_ctx *tc = sess->tfrm_ctx; + + DEBUG(printk("get_transform_ctx, sess=0x%p, tid=%d\n", sess, tid)); + assert(sess != NULL); + while (tc && tc->init.tid != tid){ + DEBUG(printk("tc=0x%p, tc->next=0x%p\n", tc, tc->next)); + tc = tc->next; + } + DEBUG(printk("get_transform_ctx, returning tc=0x%p\n", tc)); + return tc; +} + + + +/* The AES s-transform matrix (s-box). */ +static const u8 aes_sbox[256] = { + 99, 124, 119, 123, 242, 107, 111, 197, 48, 1, 103, 43, 254, 215, 171, 118, + 202, 130, 201, 125, 250, 89, 71, 240, 173, 212, 162, 175, 156, 164, 114, 192, + 183, 253, 147, 38, 54, 63, 247, 204, 52, 165, 229, 241, 113, 216, 49, 21, + 4, 199, 35, 195, 24, 150, 5, 154, 7, 18, 128, 226, 235, 39, 178, 117, + 9, 131, 44, 26, 27, 110, 90, 160, 82, 59, 214, 179, 41, 227, 47, 132, + 83, 209, 0, 237, 32, 252, 177, 91, 106, 203, 190, 57, 74, 76, 88, 207, + 208, 239, 170, 251, 67, 77, 51, 133, 69, 249, 2, 127, 80, 60, 159, 168, + 81, 163, 64, 143, 146, 157, 56, 245, 188, 182, 218, 33, 16, 255, 243, 210, + 205, 12, 19, 236, 95, 151, 68, 23, 196, 167, 126, 61, 100, 93, 25, 115, + 96, 129, 79, 220, 34, 42, 144, 136, 70, 238, 184, 20, 222, 94, 11, 219, + 224, 50, 58, 10, 73, 6, 36, 92, 194, 211, 172, 98, 145, 149, 228, 121, + 231, 200, 55, 109, 141, 213, 78, 169, 108, 86, 244, 234, 101, 122, 174, 8, + 186, 120, 37, 46, 28, 166, 180, 198, 232, 221, 116, 31, 75, 189, 139, 138, + 112, 62, 181, 102, 72, 3, 246, 14, 97, 53, 87, 185, 134, 193, 29, 158, + 225, 248, 152, 17, 105, 217, 142, 148, 155, 30, 135, 233, 206, 85, 40, 223, + 140, 161, 137, 13, 191, 230, 66, 104, 65, 153, 45, 15, 176, 84, 187, 22 +}; + +/* AES has a 32 bit word round constants for each round in the + * key schedule. round_constant[i] is really Rcon[i+1] in FIPS187. + */ +static u32 round_constant[11] = { + 0x01000000, 0x02000000, 0x04000000, 0x08000000, + 0x10000000, 0x20000000, 0x40000000, 0x80000000, + 0x1B000000, 0x36000000, 0x6C000000 +}; + +/* Apply the s-box to each of the four occtets in w. */ +static u32 aes_ks_subword(const u32 w) +{ + u8 bytes[4]; + + *(u32*)(&bytes[0]) = w; + bytes[0] = aes_sbox[bytes[0]]; + bytes[1] = aes_sbox[bytes[1]]; + bytes[2] = aes_sbox[bytes[2]]; + bytes[3] = aes_sbox[bytes[3]]; + return *(u32*)(&bytes[0]); +} + +/* The encrypt (forward) Rijndael key schedule algorithm pseudo code: + * (Note that AES words are 32 bit long) + * + * KeyExpansion(byte key[4*Nk], word w[Nb*(Nr+1)], Nk){ + * word temp + * i = 0 + * while (i < Nk) { + * w[i] = word(key[4*i, 4*i + 1, 4*i + 2, 4*i + 3]) + * i = i + 1 + * } + * i = Nk + * + * while (i < (Nb * (Nr + 1))) { + * temp = w[i - 1] + * if ((i mod Nk) == 0) { + * temp = SubWord(RotWord(temp)) xor Rcon[i/Nk] + * } + * else if ((Nk > 6) && ((i mod Nk) == 4)) { + * temp = SubWord(temp) + * } + * w[i] = w[i - Nk] xor temp + * } + * RotWord(t) does a 8 bit cyclic shift left on a 32 bit word. + * SubWord(t) applies the AES s-box individually to each octet + * in a 32 bit word. + * + * For AES Nk can have the values 4, 6, and 8 (corresponding to + * values for Nr of 10, 12, and 14). Nb is always 4. + * + * To construct w[i], w[i - 1] and w[i - Nk] must be + * available. Consequently we must keep a state of the last Nk words + * to be able to create the last round keys. + */ +static void get_aes_decrypt_key(unsigned char *dec_key, const unsigned char *key, unsigned int keylength) +{ + u32 temp; + u32 w_ring[8]; /* nk is max 8, use elements 0..(nk - 1) as a ringbuffer */ + u8 w_last_ix; + int i; + u8 nr, nk; + + switch (keylength){ + case 128: + nk = 4; + nr = 10; + break; + case 192: + nk = 6; + nr = 12; + break; + case 256: + nk = 8; + nr = 14; + break; + default: + panic("stream co-processor: bad aes key length in get_aes_decrypt_key\n"); + }; + + /* Need to do host byte order correction here since key is byte oriented and the + * kx algorithm is word (u32) oriented. */ + for (i = 0; i < nk; i+=1) { + w_ring[i] = be32_to_cpu(*(u32*)&key[4*i]); + } + + i = (int)nk; + w_last_ix = i - 1; + while (i < (4 * (nr + 2))) { + temp = w_ring[w_last_ix]; + if (!(i % nk)) { + /* RotWord(temp) */ + temp = (temp << 8) | (temp >> 24); + temp = aes_ks_subword(temp); + temp ^= round_constant[i/nk - 1]; + } else if ((nk > 6) && ((i % nk) == 4)) { + temp = aes_ks_subword(temp); + } + w_last_ix = (w_last_ix + 1) % nk; /* This is the same as (i-Nk) mod Nk */ + temp ^= w_ring[w_last_ix]; + w_ring[w_last_ix] = temp; + + /* We need the round keys for round Nr+1 and Nr+2 (round key + * Nr+2 is the round key beyond the last one used when + * encrypting). Rounds are numbered starting from 0, Nr=10 + * implies 11 rounds are used in encryption/decryption. + */ + if (i >= (4 * nr)) { + /* Need to do host byte order correction here, the key + * is byte oriented. */ + *(u32*)dec_key = cpu_to_be32(temp); + dec_key += 4; + } + ++i; + } +} + + +/**** Job/operation management. ****/ + +int cryptocop_job_queue_insert_csum(struct cryptocop_operation *operation) +{ + return cryptocop_job_queue_insert(cryptocop_prio_kernel_csum, operation); +} + +int cryptocop_job_queue_insert_crypto(struct cryptocop_operation *operation) +{ + return cryptocop_job_queue_insert(cryptocop_prio_kernel, operation); +} + +int cryptocop_job_queue_insert_user_job(struct cryptocop_operation *operation) +{ + return cryptocop_job_queue_insert(cryptocop_prio_user, operation); +} + +static int cryptocop_job_queue_insert(cryptocop_queue_priority prio, struct cryptocop_operation *operation) +{ + int ret; + struct cryptocop_prio_job *pj = NULL; + unsigned long int flags; + + DEBUG(printk("cryptocop_job_queue_insert(%d, 0x%p)\n", prio, operation)); + + if (!operation || !operation->cb){ + DEBUG_API(printk("cryptocop_job_queue_insert oper=0x%p, NULL operation or callback\n", operation)); + return -EINVAL; + } + + if ((ret = cryptocop_job_setup(&pj, operation)) != 0){ + DEBUG_API(printk("cryptocop_job_queue_insert: job setup failed\n")); + return ret; + } + assert(pj != NULL); + + spin_lock_irqsave(&cryptocop_job_queue_lock, flags); + list_add_tail(&pj->node, &cryptocop_job_queues[prio].jobs); + spin_unlock_irqrestore(&cryptocop_job_queue_lock, flags); + + /* Make sure a job is running */ + cryptocop_start_job(); + return 0; +} + +static void cryptocop_do_tasklet(unsigned long unused); +DECLARE_TASKLET (cryptocop_tasklet, cryptocop_do_tasklet, 0); + +static void cryptocop_do_tasklet(unsigned long unused) +{ + struct list_head *node; + struct cryptocop_prio_job *pj = NULL; + unsigned long flags; + + DEBUG(printk("cryptocop_do_tasklet: entering\n")); + + do { + spin_lock_irqsave(&cryptocop_completed_jobs_lock, flags); + if (!list_empty(&cryptocop_completed_jobs)){ + node = cryptocop_completed_jobs.next; + list_del(node); + pj = list_entry(node, struct cryptocop_prio_job, node); + } else { + pj = NULL; + } + spin_unlock_irqrestore(&cryptocop_completed_jobs_lock, flags); + if (pj) { + assert(pj->oper != NULL); + + /* Notify consumer of operation completeness. */ + DEBUG(printk("cryptocop_do_tasklet: callback 0x%p, data 0x%p\n", pj->oper->cb, pj->oper->cb_data)); + + pj->oper->operation_status = 0; /* Job is completed. */ + pj->oper->cb(pj->oper, pj->oper->cb_data); + delete_internal_operation(pj->iop); + kfree(pj); + } + } while (pj != NULL); + + DEBUG(printk("cryptocop_do_tasklet: exiting\n")); +} + +static irqreturn_t +dma_done_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + struct cryptocop_prio_job *done_job; + reg_dma_rw_ack_intr ack_intr = { + .data = 1, + }; + + REG_WR (dma, regi_dma9, rw_ack_intr, ack_intr); + + DEBUG(printk("cryptocop DMA done\n")); + + spin_lock(&running_job_lock); + if (cryptocop_running_job == NULL){ + printk("stream co-processor got interrupt when not busy\n"); + spin_unlock(&running_job_lock); + return IRQ_HANDLED; + } + done_job = cryptocop_running_job; + cryptocop_running_job = NULL; + spin_unlock(&running_job_lock); + + /* Start processing a job. */ + if (!spin_trylock(&cryptocop_process_lock)){ + DEBUG(printk("cryptocop irq handler, not starting a job\n")); + } else { + cryptocop_start_job(); + spin_unlock(&cryptocop_process_lock); + } + + done_job->oper->operation_status = 0; /* Job is completed. */ + if (done_job->oper->fast_callback){ + /* This operation wants callback from interrupt. */ + done_job->oper->cb(done_job->oper, done_job->oper->cb_data); + delete_internal_operation(done_job->iop); + kfree(done_job); + } else { + spin_lock(&cryptocop_completed_jobs_lock); + list_add_tail(&(done_job->node), &cryptocop_completed_jobs); + spin_unlock(&cryptocop_completed_jobs_lock); + tasklet_schedule(&cryptocop_tasklet); + } + + DEBUG(printk("cryptocop leave irq handler\n")); + return IRQ_HANDLED; +} + + +/* Setup interrupts and DMA channels. */ +static int init_cryptocop(void) +{ + unsigned long flags; + reg_intr_vect_rw_mask intr_mask; + reg_dma_rw_cfg dma_cfg = {.en = 1}; + reg_dma_rw_intr_mask intr_mask_in = {.data = regk_dma_yes}; /* Only want descriptor interrupts from the DMA in channel. */ + reg_dma_rw_ack_intr ack_intr = {.data = 1,.in_eop = 1 }; + reg_strcop_rw_cfg strcop_cfg = { + .ipend = regk_strcop_little, + .td1 = regk_strcop_e, + .td2 = regk_strcop_d, + .td3 = regk_strcop_e, + .ignore_sync = 0, + .en = 1 + }; + + if (request_irq(DMA9_INTR_VECT, dma_done_interrupt, 0, "stream co-processor DMA", NULL)) panic("request_irq stream co-processor irq dma9"); + + (void)crisv32_request_dma(8, "strcop", DMA_PANIC_ON_ERROR, 0, dma_strp); + (void)crisv32_request_dma(9, "strcop", DMA_PANIC_ON_ERROR, 0, dma_strp); + + local_irq_save(flags); + + /* Reset and enable the cryptocop. */ + strcop_cfg.en = 0; + REG_WR(strcop, regi_strcop, rw_cfg, strcop_cfg); + strcop_cfg.en = 1; + REG_WR(strcop, regi_strcop, rw_cfg, strcop_cfg); + + /* Enable DMA9 interrupt */ + intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); + intr_mask.dma9 = 1; + REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); + + /* Enable DMAs. */ + REG_WR(dma, regi_dma9, rw_cfg, dma_cfg); /* input DMA */ + REG_WR(dma, regi_dma8, rw_cfg, dma_cfg); /* output DMA */ + + /* Set up wordsize = 4 for DMAs. */ + DMA_WR_CMD (regi_dma8, regk_dma_set_w_size4); + DMA_WR_CMD (regi_dma9, regk_dma_set_w_size4); + + /* Enable interrupts. */ + REG_WR(dma, regi_dma9, rw_intr_mask, intr_mask_in); + + /* Clear intr ack. */ + REG_WR(dma, regi_dma9, rw_ack_intr, ack_intr); + + local_irq_restore(flags); + + return 0; +} + +/* Free used cryptocop hw resources (interrupt and DMA channels). */ +static void release_cryptocop(void) +{ + unsigned long flags; + reg_intr_vect_rw_mask intr_mask; + reg_dma_rw_cfg dma_cfg = {.en = 0}; + reg_dma_rw_intr_mask intr_mask_in = {0}; + reg_dma_rw_ack_intr ack_intr = {.data = 1,.in_eop = 1 }; + + local_irq_save(flags); + + /* Clear intr ack. */ + REG_WR(dma, regi_dma9, rw_ack_intr, ack_intr); + + /* Disable DMA9 interrupt */ + intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); + intr_mask.dma9 = 0; + REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); + + /* Disable DMAs. */ + REG_WR(dma, regi_dma9, rw_cfg, dma_cfg); /* input DMA */ + REG_WR(dma, regi_dma8, rw_cfg, dma_cfg); /* output DMA */ + + /* Disable interrupts. */ + REG_WR(dma, regi_dma9, rw_intr_mask, intr_mask_in); + + local_irq_restore(flags); + + free_irq(DMA9_INTR_VECT, NULL); + + (void)crisv32_free_dma(8); + (void)crisv32_free_dma(9); +} + + +/* Init job queue. */ +static int cryptocop_job_queue_init(void) +{ + int i; + + INIT_LIST_HEAD(&cryptocop_completed_jobs); + + for (i = 0; i < cryptocop_prio_no_prios; i++){ + cryptocop_job_queues[i].prio = (cryptocop_queue_priority)i; + INIT_LIST_HEAD(&cryptocop_job_queues[i].jobs); + } + return 0; +} + + +static void cryptocop_job_queue_close(void) +{ + struct list_head *node, *tmp; + struct cryptocop_prio_job *pj = NULL; + unsigned long int process_flags, flags; + int i; + + /* FIXME: This is as yet untested code. */ + + /* Stop strcop from getting an operation to process while we are closing the + module. */ + spin_lock_irqsave(&cryptocop_process_lock, process_flags); + + /* Empty the job queue. */ + spin_lock_irqsave(&cryptocop_process_lock, process_flags); + for (i = 0; i < cryptocop_prio_no_prios; i++){ + if (!list_empty(&(cryptocop_job_queues[i].jobs))){ + list_for_each_safe(node, tmp, &(cryptocop_job_queues[i].jobs)) { + pj = list_entry(node, struct cryptocop_prio_job, node); + list_del(node); + + /* Call callback to notify consumer of job removal. */ + DEBUG(printk("cryptocop_job_queue_close: callback 0x%p, data 0x%p\n", pj->oper->cb, pj->oper->cb_data)); + pj->oper->operation_status = -EINTR; /* Job is terminated without completion. */ + pj->oper->cb(pj->oper, pj->oper->cb_data); + + delete_internal_operation(pj->iop); + kfree(pj); + } + } + } + spin_unlock_irqrestore(&cryptocop_process_lock, process_flags); + + /* Remove the running job, if any. */ + spin_lock_irqsave(&running_job_lock, flags); + if (cryptocop_running_job){ + reg_strcop_rw_cfg rw_cfg; + reg_dma_rw_cfg dma_out_cfg, dma_in_cfg; + + /* Stop DMA. */ + dma_out_cfg = REG_RD(dma, regi_dma8, rw_cfg); + dma_out_cfg.en = regk_dma_no; + REG_WR(dma, regi_dma8, rw_cfg, dma_out_cfg); + + dma_in_cfg = REG_RD(dma, regi_dma9, rw_cfg); + dma_in_cfg.en = regk_dma_no; + REG_WR(dma, regi_dma9, rw_cfg, dma_in_cfg); + + /* Disble the cryptocop. */ + rw_cfg = REG_RD(strcop, regi_strcop, rw_cfg); + rw_cfg.en = 0; + REG_WR(strcop, regi_strcop, rw_cfg, rw_cfg); + + pj = cryptocop_running_job; + cryptocop_running_job = NULL; + + /* Call callback to notify consumer of job removal. */ + DEBUG(printk("cryptocop_job_queue_close: callback 0x%p, data 0x%p\n", pj->oper->cb, pj->oper->cb_data)); + pj->oper->operation_status = -EINTR; /* Job is terminated without completion. */ + pj->oper->cb(pj->oper, pj->oper->cb_data); + + delete_internal_operation(pj->iop); + kfree(pj); + } + spin_unlock_irqrestore(&running_job_lock, flags); + + /* Remove completed jobs, if any. */ + spin_lock_irqsave(&cryptocop_completed_jobs_lock, flags); + + list_for_each_safe(node, tmp, &cryptocop_completed_jobs) { + pj = list_entry(node, struct cryptocop_prio_job, node); + list_del(node); + /* Call callback to notify consumer of job removal. */ + DEBUG(printk("cryptocop_job_queue_close: callback 0x%p, data 0x%p\n", pj->oper->cb, pj->oper->cb_data)); + pj->oper->operation_status = -EINTR; /* Job is terminated without completion. */ + pj->oper->cb(pj->oper, pj->oper->cb_data); + + delete_internal_operation(pj->iop); + kfree(pj); + } + spin_unlock_irqrestore(&cryptocop_completed_jobs_lock, flags); +} + + +static void cryptocop_start_job(void) +{ + int i; + struct cryptocop_prio_job *pj; + unsigned long int flags; + unsigned long int running_job_flags; + reg_strcop_rw_cfg rw_cfg = {.en = 1, .ignore_sync = 0}; + + DEBUG(printk("cryptocop_start_job: entering\n")); + + spin_lock_irqsave(&running_job_lock, running_job_flags); + if (cryptocop_running_job != NULL){ + /* Already running. */ + DEBUG(printk("cryptocop_start_job: already running, exit\n")); + spin_unlock_irqrestore(&running_job_lock, running_job_flags); + return; + } + spin_lock_irqsave(&cryptocop_job_queue_lock, flags); + + /* Check the queues in priority order. */ + for (i = cryptocop_prio_kernel_csum; (i < cryptocop_prio_no_prios) && list_empty(&cryptocop_job_queues[i].jobs); i++); + if (i == cryptocop_prio_no_prios) { + spin_unlock_irqrestore(&cryptocop_job_queue_lock, flags); + spin_unlock_irqrestore(&running_job_lock, running_job_flags); + DEBUG(printk("cryptocop_start_job: no jobs to run\n")); + return; /* No jobs to run */ + } + DEBUG(printk("starting job for prio %d\n", i)); + + /* TODO: Do not starve lower priority jobs. Let in a lower + * prio job for every N-th processed higher prio job or some + * other scheduling policy. This could reasonably be + * tweakable since the optimal balance would depend on the + * type of load on the system. */ + + /* Pull the DMA lists from the job and start the DMA client. */ + pj = list_entry(cryptocop_job_queues[i].jobs.next, struct cryptocop_prio_job, node); + list_del(&pj->node); + spin_unlock_irqrestore(&cryptocop_job_queue_lock, flags); + cryptocop_running_job = pj; + + /* Set config register (3DES and CSUM modes). */ + switch (pj->iop->tdes_mode){ + case cryptocop_3des_eee: + rw_cfg.td1 = regk_strcop_e; + rw_cfg.td2 = regk_strcop_e; + rw_cfg.td3 = regk_strcop_e; + break; + case cryptocop_3des_eed: + rw_cfg.td1 = regk_strcop_e; + rw_cfg.td2 = regk_strcop_e; + rw_cfg.td3 = regk_strcop_d; + break; + case cryptocop_3des_ede: + rw_cfg.td1 = regk_strcop_e; + rw_cfg.td2 = regk_strcop_d; + rw_cfg.td3 = regk_strcop_e; + break; + case cryptocop_3des_edd: + rw_cfg.td1 = regk_strcop_e; + rw_cfg.td2 = regk_strcop_d; + rw_cfg.td3 = regk_strcop_d; + break; + case cryptocop_3des_dee: + rw_cfg.td1 = regk_strcop_d; + rw_cfg.td2 = regk_strcop_e; + rw_cfg.td3 = regk_strcop_e; + break; + case cryptocop_3des_ded: + rw_cfg.td1 = regk_strcop_d; + rw_cfg.td2 = regk_strcop_e; + rw_cfg.td3 = regk_strcop_d; + break; + case cryptocop_3des_dde: + rw_cfg.td1 = regk_strcop_d; + rw_cfg.td2 = regk_strcop_d; + rw_cfg.td3 = regk_strcop_e; + break; + case cryptocop_3des_ddd: + rw_cfg.td1 = regk_strcop_d; + rw_cfg.td2 = regk_strcop_d; + rw_cfg.td3 = regk_strcop_d; + break; + default: + DEBUG(printk("cryptocop_setup_dma_list: bad 3DES mode\n")); + } + switch (pj->iop->csum_mode){ + case cryptocop_csum_le: + rw_cfg.ipend = regk_strcop_little; + break; + case cryptocop_csum_be: + rw_cfg.ipend = regk_strcop_big; + break; + default: + DEBUG(printk("cryptocop_setup_dma_list: bad checksum mode\n")); + } + REG_WR(strcop, regi_strcop, rw_cfg, rw_cfg); + + DEBUG(printk("cryptocop_start_job: starting DMA, new cryptocop_running_job=0x%p\n" + "ctx_in: 0x%p, phys: 0x%p\n" + "ctx_out: 0x%p, phys: 0x%p\n", + pj, + &pj->iop->ctx_in, (char*)virt_to_phys(&pj->iop->ctx_in), + &pj->iop->ctx_out, (char*)virt_to_phys(&pj->iop->ctx_out))); + + /* Start input DMA. */ + DMA_START_CONTEXT(regi_dma9, virt_to_phys(&pj->iop->ctx_in)); + + /* Start output DMA. */ + DMA_START_CONTEXT(regi_dma8, virt_to_phys(&pj->iop->ctx_out)); + + spin_unlock_irqrestore(&running_job_lock, running_job_flags); + DEBUG(printk("cryptocop_start_job: exiting\n")); +} + + +static int cryptocop_job_setup(struct cryptocop_prio_job **pj, struct cryptocop_operation *operation) +{ + int err; + int alloc_flag = operation->in_interrupt ? GFP_ATOMIC : GFP_KERNEL; + void *iop_alloc_ptr = NULL; + + *pj = kmalloc(sizeof (struct cryptocop_prio_job), alloc_flag); + if (!*pj) return -ENOMEM; + + DEBUG(printk("cryptocop_job_setup: operation=0x%p\n", operation)); + + (*pj)->oper = operation; + DEBUG(printk("cryptocop_job_setup, cb=0x%p cb_data=0x%p\n", (*pj)->oper->cb, (*pj)->oper->cb_data)); + + if (operation->use_dmalists) { + DEBUG(print_user_dma_lists(&operation->list_op)); + if (!operation->list_op.inlist || !operation->list_op.outlist || !operation->list_op.out_data_buf || !operation->list_op.in_data_buf){ + DEBUG_API(printk("cryptocop_job_setup: bad indata (use_dmalists)\n")); + kfree(*pj); + return -EINVAL; + } + iop_alloc_ptr = kmalloc(DESCR_ALLOC_PAD + sizeof(struct cryptocop_int_operation), alloc_flag); + if (!iop_alloc_ptr) { + DEBUG_API(printk("cryptocop_job_setup: kmalloc cryptocop_int_operation\n")); + kfree(*pj); + return -ENOMEM; + } + (*pj)->iop = (struct cryptocop_int_operation*)(((unsigned long int)(iop_alloc_ptr + DESCR_ALLOC_PAD + offsetof(struct cryptocop_int_operation, ctx_out)) & ~0x0000001F) - offsetof(struct cryptocop_int_operation, ctx_out)); + DEBUG(memset((*pj)->iop, 0xff, sizeof(struct cryptocop_int_operation))); + (*pj)->iop->alloc_ptr = iop_alloc_ptr; + (*pj)->iop->sid = operation->sid; + (*pj)->iop->cdesc_out = NULL; + (*pj)->iop->cdesc_in = NULL; + (*pj)->iop->tdes_mode = operation->list_op.tdes_mode; + (*pj)->iop->csum_mode = operation->list_op.csum_mode; + (*pj)->iop->ddesc_out = operation->list_op.outlist; + (*pj)->iop->ddesc_in = operation->list_op.inlist; + + /* Setup DMA contexts. */ + (*pj)->iop->ctx_out.next = NULL; + (*pj)->iop->ctx_out.eol = 1; + (*pj)->iop->ctx_out.saved_data = operation->list_op.outlist; + (*pj)->iop->ctx_out.saved_data_buf = operation->list_op.out_data_buf; + + (*pj)->iop->ctx_in.next = NULL; + (*pj)->iop->ctx_in.eol = 1; + (*pj)->iop->ctx_in.saved_data = operation->list_op.inlist; + (*pj)->iop->ctx_in.saved_data_buf = operation->list_op.in_data_buf; + } else { + if ((err = cryptocop_setup_dma_list(operation, &(*pj)->iop, alloc_flag))) { + DEBUG_API(printk("cryptocop_job_setup: cryptocop_setup_dma_list failed %d\n", err)); + kfree(*pj); + return err; + } + } + DEBUG(print_dma_descriptors((*pj)->iop)); + + DEBUG(printk("cryptocop_job_setup, DMA list setup successful\n")); + + return 0; +} + + +static int cryptocop_open(struct inode *inode, struct file *filp) +{ + int p = MINOR(inode->i_rdev); + + if (p != CRYPTOCOP_MINOR) return -EINVAL; + + filp->private_data = NULL; + return 0; +} + + +static int cryptocop_release(struct inode *inode, struct file *filp) +{ + struct cryptocop_private *dev = filp->private_data; + struct cryptocop_private *dev_next; + + while (dev){ + dev_next = dev->next; + if (dev->sid != CRYPTOCOP_SESSION_ID_NONE) { + (void)cryptocop_free_session(dev->sid); + } + kfree(dev); + dev = dev_next; + } + + return 0; +} + + +static int cryptocop_ioctl_close_session(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + struct cryptocop_private *dev = filp->private_data; + struct cryptocop_private *prev_dev = NULL; + struct strcop_session_op *sess_op = (struct strcop_session_op *)arg; + struct strcop_session_op sop; + int err; + + DEBUG(printk("cryptocop_ioctl_close_session\n")); + + if (!access_ok(VERIFY_READ, sess_op, sizeof(struct strcop_session_op))) + return -EFAULT; + err = copy_from_user(&sop, sess_op, sizeof(struct strcop_session_op)); + if (err) return -EFAULT; + + while (dev && (dev->sid != sop.ses_id)) { + prev_dev = dev; + dev = dev->next; + } + if (dev){ + if (prev_dev){ + prev_dev->next = dev->next; + } else { + filp->private_data = dev->next; + } + err = cryptocop_free_session(dev->sid); + if (err) return -EFAULT; + } else { + DEBUG_API(printk("cryptocop_ioctl_close_session: session %lld not found\n", sop.ses_id)); + return -EINVAL; + } + return 0; +} + + +static void ioctl_process_job_callback(struct cryptocop_operation *op, void*cb_data) +{ + struct ioctl_job_cb_ctx *jc = (struct ioctl_job_cb_ctx *)cb_data; + + DEBUG(printk("ioctl_process_job_callback: op=0x%p, cb_data=0x%p\n", op, cb_data)); + + jc->processed = 1; + wake_up(&cryptocop_ioc_process_wq); +} + + +#define CRYPTOCOP_IOCTL_CIPHER_TID (1) +#define CRYPTOCOP_IOCTL_DIGEST_TID (2) +#define CRYPTOCOP_IOCTL_CSUM_TID (3) + +static size_t first_cfg_change_ix(struct strcop_crypto_op *crp_op) +{ + size_t ch_ix = 0; + + if (crp_op->do_cipher) ch_ix = crp_op->cipher_start; + if (crp_op->do_digest && (crp_op->digest_start < ch_ix)) ch_ix = crp_op->digest_start; + if (crp_op->do_csum && (crp_op->csum_start < ch_ix)) ch_ix = crp_op->csum_start; + + DEBUG(printk("first_cfg_change_ix: ix=%d\n", ch_ix)); + return ch_ix; +} + + +static size_t next_cfg_change_ix(struct strcop_crypto_op *crp_op, size_t ix) +{ + size_t ch_ix = INT_MAX; + size_t tmp_ix = 0; + + if (crp_op->do_cipher && ((crp_op->cipher_start + crp_op->cipher_len) > ix)){ + if (crp_op->cipher_start > ix) { + ch_ix = crp_op->cipher_start; + } else { + ch_ix = crp_op->cipher_start + crp_op->cipher_len; + } + } + if (crp_op->do_digest && ((crp_op->digest_start + crp_op->digest_len) > ix)){ + if (crp_op->digest_start > ix) { + tmp_ix = crp_op->digest_start; + } else { + tmp_ix = crp_op->digest_start + crp_op->digest_len; + } + if (tmp_ix < ch_ix) ch_ix = tmp_ix; + } + if (crp_op->do_csum && ((crp_op->csum_start + crp_op->csum_len) > ix)){ + if (crp_op->csum_start > ix) { + tmp_ix = crp_op->csum_start; + } else { + tmp_ix = crp_op->csum_start + crp_op->csum_len; + } + if (tmp_ix < ch_ix) ch_ix = tmp_ix; + } + if (ch_ix == INT_MAX) ch_ix = ix; + DEBUG(printk("next_cfg_change_ix prev ix=%d, next ix=%d\n", ix, ch_ix)); + return ch_ix; +} + + +/* Map map_length bytes from the pages starting on *pageix and *pageoffset to iovecs starting on *iovix. + * Return -1 for ok, 0 for fail. */ +static int map_pages_to_iovec(struct iovec *iov, int iovlen, int *iovix, struct page **pages, int nopages, int *pageix, int *pageoffset, int map_length ) +{ + int tmplen; + + assert(iov != NULL); + assert(iovix != NULL); + assert(pages != NULL); + assert(pageix != NULL); + assert(pageoffset != NULL); + + DEBUG(printk("map_pages_to_iovec, map_length=%d, iovlen=%d, *iovix=%d, nopages=%d, *pageix=%d, *pageoffset=%d\n", map_length, iovlen, *iovix, nopages, *pageix, *pageoffset)); + + while (map_length > 0){ + DEBUG(printk("map_pages_to_iovec, map_length=%d, iovlen=%d, *iovix=%d, nopages=%d, *pageix=%d, *pageoffset=%d\n", map_length, iovlen, *iovix, nopages, *pageix, *pageoffset)); + if (*iovix >= iovlen){ + DEBUG_API(printk("map_page_to_iovec: *iovix=%d >= iovlen=%d\n", *iovix, iovlen)); + return 0; + } + if (*pageix >= nopages){ + DEBUG_API(printk("map_page_to_iovec: *pageix=%d >= nopages=%d\n", *pageix, nopages)); + return 0; + } + iov[*iovix].iov_base = (unsigned char*)page_address(pages[*pageix]) + *pageoffset; + tmplen = PAGE_SIZE - *pageoffset; + if (tmplen < map_length){ + (*pageoffset) = 0; + (*pageix)++; + } else { + tmplen = map_length; + (*pageoffset) += map_length; + } + DEBUG(printk("mapping %d bytes from page %d (or %d) to iovec %d\n", tmplen, *pageix, *pageix-1, *iovix)); + iov[*iovix].iov_len = tmplen; + map_length -= tmplen; + (*iovix)++; + } + DEBUG(printk("map_page_to_iovec, exit, *iovix=%d\n", *iovix)); + return -1; +} + + + +static int cryptocop_ioctl_process(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg) +{ + int i; + struct cryptocop_private *dev = filp->private_data; + struct strcop_crypto_op *crp_oper = (struct strcop_crypto_op *)arg; + struct strcop_crypto_op oper = {0}; + int err = 0; + struct cryptocop_operation *cop = NULL; + + struct ioctl_job_cb_ctx *jc = NULL; + + struct page **inpages = NULL; + struct page **outpages = NULL; + int noinpages = 0; + int nooutpages = 0; + + struct cryptocop_desc descs[5]; /* Max 5 descriptors are needed, there are three transforms that + * can get connected/disconnected on different places in the indata. */ + struct cryptocop_desc_cfg dcfgs[5*3]; + int desc_ix = 0; + int dcfg_ix = 0; + struct cryptocop_tfrm_cfg ciph_tcfg = {0}; + struct cryptocop_tfrm_cfg digest_tcfg = {0}; + struct cryptocop_tfrm_cfg csum_tcfg = {0}; + + unsigned char *digest_result = NULL; + int digest_length = 0; + int cblocklen = 0; + unsigned char csum_result[CSUM_BLOCK_LENGTH]; + struct cryptocop_session *sess; + + int iovlen = 0; + int iovix = 0; + int pageix = 0; + int pageoffset = 0; + + size_t prev_ix = 0; + size_t next_ix; + + int cipher_active, digest_active, csum_active; + int end_digest, end_csum; + int digest_done = 0; + int cipher_done = 0; + int csum_done = 0; + + DEBUG(printk("cryptocop_ioctl_process\n")); + + if (!access_ok(VERIFY_WRITE, crp_oper, sizeof(struct strcop_crypto_op))){ + DEBUG_API(printk("cryptocop_ioctl_process: !access_ok crp_oper!\n")); + return -EFAULT; + } + if (copy_from_user(&oper, crp_oper, sizeof(struct strcop_crypto_op))) { + DEBUG_API(printk("cryptocop_ioctl_process: copy_from_user\n")); + return -EFAULT; + } + DEBUG(print_strcop_crypto_op(&oper)); + + while (dev && dev->sid != oper.ses_id) dev = dev->next; + if (!dev){ + DEBUG_API(printk("cryptocop_ioctl_process: session %lld not found\n", oper.ses_id)); + return -EINVAL; + } + + /* Check buffers. */ + if (((oper.indata + oper.inlen) < oper.indata) || ((oper.cipher_outdata + oper.cipher_outlen) < oper.cipher_outdata)){ + DEBUG_API(printk("cryptocop_ioctl_process: user buffers wrapped around, bad user!\n")); + return -EINVAL; + } + + if (!access_ok(VERIFY_WRITE, oper.cipher_outdata, oper.cipher_outlen)){ + DEBUG_API(printk("cryptocop_ioctl_process: !access_ok out data!\n")); + return -EFAULT; + } + if (!access_ok(VERIFY_READ, oper.indata, oper.inlen)){ + DEBUG_API(printk("cryptocop_ioctl_process: !access_ok in data!\n")); + return -EFAULT; + } + + cop = kmalloc(sizeof(struct cryptocop_operation), GFP_KERNEL); + if (!cop) { + DEBUG_API(printk("cryptocop_ioctl_process: kmalloc\n")); + return -ENOMEM; + } + jc = kmalloc(sizeof(struct ioctl_job_cb_ctx), GFP_KERNEL); + if (!jc) { + DEBUG_API(printk("cryptocop_ioctl_process: kmalloc\n")); + err = -ENOMEM; + goto error_cleanup; + } + jc->processed = 0; + + cop->cb_data = jc; + cop->cb = ioctl_process_job_callback; + cop->operation_status = 0; + cop->use_dmalists = 0; + cop->in_interrupt = 0; + cop->fast_callback = 0; + cop->tfrm_op.tfrm_cfg = NULL; + cop->tfrm_op.desc = NULL; + cop->tfrm_op.indata = NULL; + cop->tfrm_op.incount = 0; + cop->tfrm_op.inlen = 0; + cop->tfrm_op.outdata = NULL; + cop->tfrm_op.outcount = 0; + cop->tfrm_op.outlen = 0; + + sess = get_session(oper.ses_id); + if (!sess){ + DEBUG_API(printk("cryptocop_ioctl_process: bad session id.\n")); + kfree(cop); + kfree(jc); + return -EINVAL; + } + + if (oper.do_cipher) { + unsigned int cipher_outlen = 0; + struct cryptocop_transform_ctx *tc = get_transform_ctx(sess, CRYPTOCOP_IOCTL_CIPHER_TID); + if (!tc) { + DEBUG_API(printk("cryptocop_ioctl_process: no cipher transform in session.\n")); + err = -EINVAL; + goto error_cleanup; + } + ciph_tcfg.tid = CRYPTOCOP_IOCTL_CIPHER_TID; + ciph_tcfg.inject_ix = 0; + ciph_tcfg.flags = 0; + if ((oper.cipher_start < 0) || (oper.cipher_len <= 0) || (oper.cipher_start > oper.inlen) || ((oper.cipher_start + oper.cipher_len) > oper.inlen)){ + DEBUG_API(printk("cryptocop_ioctl_process: bad cipher length\n")); + kfree(cop); + kfree(jc); + return -EINVAL; + } + cblocklen = tc->init.alg == cryptocop_alg_aes ? AES_BLOCK_LENGTH : DES_BLOCK_LENGTH; + if (oper.cipher_len % cblocklen) { + kfree(cop); + kfree(jc); + DEBUG_API(printk("cryptocop_ioctl_process: cipher inlength not multiple of block length.\n")); + return -EINVAL; + } + cipher_outlen = oper.cipher_len; + if (tc->init.cipher_mode == cryptocop_cipher_mode_cbc){ + if (oper.cipher_explicit) { + ciph_tcfg.flags |= CRYPTOCOP_EXPLICIT_IV; + memcpy(ciph_tcfg.iv, oper.cipher_iv, cblocklen); + } else { + cipher_outlen = oper.cipher_len - cblocklen; + } + } else { + if (oper.cipher_explicit){ + kfree(cop); + kfree(jc); + DEBUG_API(printk("cryptocop_ioctl_process: explicit_iv when not CBC mode\n")); + return -EINVAL; + } + } + if (oper.cipher_outlen != cipher_outlen) { + kfree(cop); + kfree(jc); + DEBUG_API(printk("cryptocop_ioctl_process: cipher_outlen incorrect, should be %d not %d.\n", cipher_outlen, oper.cipher_outlen)); + return -EINVAL; + } + + if (oper.decrypt){ + ciph_tcfg.flags |= CRYPTOCOP_DECRYPT; + } else { + ciph_tcfg.flags |= CRYPTOCOP_ENCRYPT; + } + ciph_tcfg.next = cop->tfrm_op.tfrm_cfg; + cop->tfrm_op.tfrm_cfg = &ciph_tcfg; + } + if (oper.do_digest){ + struct cryptocop_transform_ctx *tc = get_transform_ctx(sess, CRYPTOCOP_IOCTL_DIGEST_TID); + if (!tc) { + DEBUG_API(printk("cryptocop_ioctl_process: no digest transform in session.\n")); + err = -EINVAL; + goto error_cleanup; + } + digest_length = tc->init.alg == cryptocop_alg_md5 ? 16 : 20; + digest_result = kmalloc(digest_length, GFP_KERNEL); + if (!digest_result) { + DEBUG_API(printk("cryptocop_ioctl_process: kmalloc digest_result\n")); + err = -EINVAL; + goto error_cleanup; + } + DEBUG(memset(digest_result, 0xff, digest_length)); + + digest_tcfg.tid = CRYPTOCOP_IOCTL_DIGEST_TID; + digest_tcfg.inject_ix = 0; + ciph_tcfg.inject_ix += digest_length; + if ((oper.digest_start < 0) || (oper.digest_len <= 0) || (oper.digest_start > oper.inlen) || ((oper.digest_start + oper.digest_len) > oper.inlen)){ + DEBUG_API(printk("cryptocop_ioctl_process: bad digest length\n")); + err = -EINVAL; + goto error_cleanup; + } + + digest_tcfg.next = cop->tfrm_op.tfrm_cfg; + cop->tfrm_op.tfrm_cfg = &digest_tcfg; + } + if (oper.do_csum){ + csum_tcfg.tid = CRYPTOCOP_IOCTL_CSUM_TID; + csum_tcfg.inject_ix = digest_length; + ciph_tcfg.inject_ix += 2; + + if ((oper.csum_start < 0) || (oper.csum_len <= 0) || (oper.csum_start > oper.inlen) || ((oper.csum_start + oper.csum_len) > oper.inlen)){ + DEBUG_API(printk("cryptocop_ioctl_process: bad csum length\n")); + kfree(cop); + kfree(jc); + return -EINVAL; + } + + csum_tcfg.next = cop->tfrm_op.tfrm_cfg; + cop->tfrm_op.tfrm_cfg = &csum_tcfg; + } + + prev_ix = first_cfg_change_ix(&oper); + if (prev_ix > oper.inlen) { + DEBUG_API(printk("cryptocop_ioctl_process: length mismatch\n")); + nooutpages = noinpages = 0; + err = -EINVAL; + goto error_cleanup; + } + DEBUG(printk("cryptocop_ioctl_process: inlen=%d, cipher_outlen=%d\n", oper.inlen, oper.cipher_outlen)); + + /* Map user pages for in and out data of the operation. */ + noinpages = (((unsigned long int)(oper.indata + prev_ix) & ~PAGE_MASK) + oper.inlen - 1 - prev_ix + ~PAGE_MASK) >> PAGE_SHIFT; + DEBUG(printk("cryptocop_ioctl_process: noinpages=%d\n", noinpages)); + inpages = kmalloc(noinpages * sizeof(struct page*), GFP_KERNEL); + if (!inpages){ + DEBUG_API(printk("cryptocop_ioctl_process: kmalloc inpages\n")); + nooutpages = noinpages = 0; + err = -ENOMEM; + goto error_cleanup; + } + if (oper.do_cipher){ + nooutpages = (((unsigned long int)oper.cipher_outdata & ~PAGE_MASK) + oper.cipher_outlen - 1 + ~PAGE_MASK) >> PAGE_SHIFT; + DEBUG(printk("cryptocop_ioctl_process: nooutpages=%d\n", nooutpages)); + outpages = kmalloc(nooutpages * sizeof(struct page*), GFP_KERNEL); + if (!outpages){ + DEBUG_API(printk("cryptocop_ioctl_process: kmalloc outpages\n")); + nooutpages = noinpages = 0; + err = -ENOMEM; + goto error_cleanup; + } + } + + /* Acquire the mm page semaphore. */ + down_read(¤t->mm->mmap_sem); + + err = get_user_pages(current, + current->mm, + (unsigned long int)(oper.indata + prev_ix), + noinpages, + 0, /* read access only for in data */ + 0, /* no force */ + inpages, + NULL); + + if (err < 0) { + up_read(¤t->mm->mmap_sem); + nooutpages = noinpages = 0; + DEBUG_API(printk("cryptocop_ioctl_process: get_user_pages indata\n")); + goto error_cleanup; + } + noinpages = err; + if (oper.do_cipher){ + err = get_user_pages(current, + current->mm, + (unsigned long int)oper.cipher_outdata, + nooutpages, + 1, /* write access for out data */ + 0, /* no force */ + outpages, + NULL); + up_read(¤t->mm->mmap_sem); + if (err < 0) { + nooutpages = 0; + DEBUG_API(printk("cryptocop_ioctl_process: get_user_pages outdata\n")); + goto error_cleanup; + } + nooutpages = err; + } else { + up_read(¤t->mm->mmap_sem); + } + + /* Add 6 to nooutpages to make room for possibly inserted buffers for storing digest and + * csum output and splits when units are (dis-)connected. */ + cop->tfrm_op.indata = kmalloc((noinpages) * sizeof(struct iovec), GFP_KERNEL); + cop->tfrm_op.outdata = kmalloc((6 + nooutpages) * sizeof(struct iovec), GFP_KERNEL); + if (!cop->tfrm_op.indata || !cop->tfrm_op.outdata) { + DEBUG_API(printk("cryptocop_ioctl_process: kmalloc iovecs\n")); + err = -ENOMEM; + goto error_cleanup; + } + + cop->tfrm_op.inlen = oper.inlen - prev_ix; + cop->tfrm_op.outlen = 0; + if (oper.do_cipher) cop->tfrm_op.outlen += oper.cipher_outlen; + if (oper.do_digest) cop->tfrm_op.outlen += digest_length; + if (oper.do_csum) cop->tfrm_op.outlen += 2; + + /* Setup the in iovecs. */ + cop->tfrm_op.incount = noinpages; + if (noinpages > 1){ + size_t tmplen = cop->tfrm_op.inlen; + + cop->tfrm_op.indata[0].iov_len = PAGE_SIZE - ((unsigned long int)(oper.indata + prev_ix) & ~PAGE_MASK); + cop->tfrm_op.indata[0].iov_base = (unsigned char*)page_address(inpages[0]) + ((unsigned long int)(oper.indata + prev_ix) & ~PAGE_MASK); + tmplen -= cop->tfrm_op.indata[0].iov_len; + for (i = 1; i<noinpages; i++){ + cop->tfrm_op.indata[i].iov_len = tmplen < PAGE_SIZE ? tmplen : PAGE_SIZE; + cop->tfrm_op.indata[i].iov_base = (unsigned char*)page_address(inpages[i]); + tmplen -= PAGE_SIZE; + } + } else { + cop->tfrm_op.indata[0].iov_len = oper.inlen - prev_ix; + cop->tfrm_op.indata[0].iov_base = (unsigned char*)page_address(inpages[0]) + ((unsigned long int)(oper.indata + prev_ix) & ~PAGE_MASK); + } + + iovlen = nooutpages + 6; + pageoffset = oper.do_cipher ? ((unsigned long int)oper.cipher_outdata & ~PAGE_MASK) : 0; + + next_ix = next_cfg_change_ix(&oper, prev_ix); + if (prev_ix == next_ix){ + DEBUG_API(printk("cryptocop_ioctl_process: length configuration broken.\n")); + err = -EINVAL; /* This should be impossible barring bugs. */ + goto error_cleanup; + } + while (prev_ix != next_ix){ + end_digest = end_csum = cipher_active = digest_active = csum_active = 0; + descs[desc_ix].cfg = NULL; + descs[desc_ix].length = next_ix - prev_ix; + + if (oper.do_cipher && (oper.cipher_start < next_ix) && (prev_ix < (oper.cipher_start + oper.cipher_len))) { + dcfgs[dcfg_ix].tid = CRYPTOCOP_IOCTL_CIPHER_TID; + dcfgs[dcfg_ix].src = cryptocop_source_dma; + cipher_active = 1; + + if (next_ix == (oper.cipher_start + oper.cipher_len)){ + cipher_done = 1; + dcfgs[dcfg_ix].last = 1; + } else { + dcfgs[dcfg_ix].last = 0; + } + dcfgs[dcfg_ix].next = descs[desc_ix].cfg; + descs[desc_ix].cfg = &dcfgs[dcfg_ix]; + ++dcfg_ix; + } + if (oper.do_digest && (oper.digest_start < next_ix) && (prev_ix < (oper.digest_start + oper.digest_len))) { + digest_active = 1; + dcfgs[dcfg_ix].tid = CRYPTOCOP_IOCTL_DIGEST_TID; + dcfgs[dcfg_ix].src = cryptocop_source_dma; + if (next_ix == (oper.digest_start + oper.digest_len)){ + assert(!digest_done); + digest_done = 1; + dcfgs[dcfg_ix].last = 1; + } else { + dcfgs[dcfg_ix].last = 0; + } + dcfgs[dcfg_ix].next = descs[desc_ix].cfg; + descs[desc_ix].cfg = &dcfgs[dcfg_ix]; + ++dcfg_ix; + } + if (oper.do_csum && (oper.csum_start < next_ix) && (prev_ix < (oper.csum_start + oper.csum_len))){ + csum_active = 1; + dcfgs[dcfg_ix].tid = CRYPTOCOP_IOCTL_CSUM_TID; + dcfgs[dcfg_ix].src = cryptocop_source_dma; + if (next_ix == (oper.csum_start + oper.csum_len)){ + csum_done = 1; + dcfgs[dcfg_ix].last = 1; + } else { + dcfgs[dcfg_ix].last = 0; + } + dcfgs[dcfg_ix].next = descs[desc_ix].cfg; + descs[desc_ix].cfg = &dcfgs[dcfg_ix]; + ++dcfg_ix; + } + if (!descs[desc_ix].cfg){ + DEBUG_API(printk("cryptocop_ioctl_process: data segment %d (%d to %d) had no active transforms\n", desc_ix, prev_ix, next_ix)); + err = -EINVAL; + goto error_cleanup; + } + descs[desc_ix].next = &(descs[desc_ix]) + 1; + ++desc_ix; + prev_ix = next_ix; + next_ix = next_cfg_change_ix(&oper, prev_ix); + } + if (desc_ix > 0){ + descs[desc_ix-1].next = NULL; + } else { + descs[0].next = NULL; + } + if (oper.do_digest) { + DEBUG(printk("cryptocop_ioctl_process: mapping %d byte digest output to iovec %d\n", digest_length, iovix)); + /* Add outdata iovec, length == <length of type of digest> */ + cop->tfrm_op.outdata[iovix].iov_base = digest_result; + cop->tfrm_op.outdata[iovix].iov_len = digest_length; + ++iovix; + } + if (oper.do_csum) { + /* Add outdata iovec, length == 2, the length of csum. */ + DEBUG(printk("cryptocop_ioctl_process: mapping 2 byte csum output to iovec %d\n", iovix)); + /* Add outdata iovec, length == <length of type of digest> */ + cop->tfrm_op.outdata[iovix].iov_base = csum_result; + cop->tfrm_op.outdata[iovix].iov_len = 2; + ++iovix; + } + if (oper.do_cipher) { + if (!map_pages_to_iovec(cop->tfrm_op.outdata, iovlen, &iovix, outpages, nooutpages, &pageix, &pageoffset, oper.cipher_outlen)){ + DEBUG_API(printk("cryptocop_ioctl_process: failed to map pages to iovec.\n")); + err = -ENOSYS; /* This should be impossible barring bugs. */ + goto error_cleanup; + } + } + DEBUG(printk("cryptocop_ioctl_process: setting cop->tfrm_op.outcount %d\n", iovix)); + cop->tfrm_op.outcount = iovix; + assert(iovix <= (nooutpages + 6)); + + cop->sid = oper.ses_id; + cop->tfrm_op.desc = &descs[0]; + + DEBUG(printk("cryptocop_ioctl_process: inserting job, cb_data=0x%p\n", cop->cb_data)); + + if ((err = cryptocop_job_queue_insert_user_job(cop)) != 0) { + DEBUG_API(printk("cryptocop_ioctl_process: insert job %d\n", err)); + err = -EINVAL; + goto error_cleanup; + } + + DEBUG(printk("cryptocop_ioctl_process: begin wait for result\n")); + + wait_event(cryptocop_ioc_process_wq, (jc->processed != 0)); + DEBUG(printk("cryptocop_ioctl_process: end wait for result\n")); + if (!jc->processed){ + printk(KERN_WARNING "cryptocop_ioctl_process: job not processed at completion\n"); + err = -EIO; + goto error_cleanup; + } + + /* Job process done. Cipher output should already be correct in job so no post processing of outdata. */ + DEBUG(printk("cryptocop_ioctl_process: operation_status = %d\n", cop->operation_status)); + if (cop->operation_status == 0){ + if (oper.do_digest){ + DEBUG(printk("cryptocop_ioctl_process: copy %d bytes digest to user\n", digest_length)); + err = copy_to_user((unsigned char*)crp_oper + offsetof(struct strcop_crypto_op, digest), digest_result, digest_length); + if (0 != err){ + DEBUG_API(printk("cryptocop_ioctl_process: copy_to_user, digest length %d, err %d\n", digest_length, err)); + err = -EFAULT; + goto error_cleanup; + } + } + if (oper.do_csum){ + DEBUG(printk("cryptocop_ioctl_process: copy 2 bytes checksum to user\n")); + err = copy_to_user((unsigned char*)crp_oper + offsetof(struct strcop_crypto_op, csum), csum_result, 2); + if (0 != err){ + DEBUG_API(printk("cryptocop_ioctl_process: copy_to_user, csum, err %d\n", err)); + err = -EFAULT; + goto error_cleanup; + } + } + err = 0; + } else { + DEBUG(printk("cryptocop_ioctl_process: returning err = operation_status = %d\n", cop->operation_status)); + err = cop->operation_status; + } + + error_cleanup: + /* Release page caches. */ + for (i = 0; i < noinpages; i++){ + put_page(inpages[i]); + } + for (i = 0; i < nooutpages; i++){ + int spdl_err; + /* Mark output pages dirty. */ + spdl_err = set_page_dirty_lock(outpages[i]); + DEBUG(if (spdl_err)printk("cryptocop_ioctl_process: set_page_dirty_lock returned %d\n", spdl_err)); + } + for (i = 0; i < nooutpages; i++){ + put_page(outpages[i]); + } + + if (digest_result) kfree(digest_result); + if (inpages) kfree(inpages); + if (outpages) kfree(outpages); + if (cop){ + if (cop->tfrm_op.indata) kfree(cop->tfrm_op.indata); + if (cop->tfrm_op.outdata) kfree(cop->tfrm_op.outdata); + kfree(cop); + } + if (jc) kfree(jc); + + DEBUG(print_lock_status()); + + return err; +} + + +static int cryptocop_ioctl_create_session(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg) +{ + cryptocop_session_id sid; + int err; + struct cryptocop_private *dev; + struct strcop_session_op *sess_op = (struct strcop_session_op *)arg; + struct strcop_session_op sop; + struct cryptocop_transform_init *tis = NULL; + struct cryptocop_transform_init ti_cipher = {0}; + struct cryptocop_transform_init ti_digest = {0}; + struct cryptocop_transform_init ti_csum = {0}; + + if (!access_ok(VERIFY_WRITE, sess_op, sizeof(struct strcop_session_op))) + return -EFAULT; + err = copy_from_user(&sop, sess_op, sizeof(struct strcop_session_op)); + if (err) return -EFAULT; + if (sop.cipher != cryptocop_cipher_none) { + if (!access_ok(VERIFY_READ, sop.key, sop.keylen)) return -EFAULT; + } + DEBUG(printk("cryptocop_ioctl_create_session, sess_op:\n")); + + DEBUG(printk("\tcipher:%d\n" + "\tcipher_mode:%d\n" + "\tdigest:%d\n" + "\tcsum:%d\n", + (int)sop.cipher, + (int)sop.cmode, + (int)sop.digest, + (int)sop.csum)); + + if (sop.cipher != cryptocop_cipher_none){ + /* Init the cipher. */ + switch (sop.cipher){ + case cryptocop_cipher_des: + ti_cipher.alg = cryptocop_alg_des; + break; + case cryptocop_cipher_3des: + ti_cipher.alg = cryptocop_alg_3des; + break; + case cryptocop_cipher_aes: + ti_cipher.alg = cryptocop_alg_aes; + break; + default: + DEBUG_API(printk("create session, bad cipher algorithm %d\n", sop.cipher)); + return -EINVAL; + }; + DEBUG(printk("setting cipher transform %d\n", ti_cipher.alg)); + copy_from_user(ti_cipher.key, sop.key, sop.keylen/8); + ti_cipher.keylen = sop.keylen; + switch (sop.cmode){ + case cryptocop_cipher_mode_cbc: + case cryptocop_cipher_mode_ecb: + ti_cipher.cipher_mode = sop.cmode; + break; + default: + DEBUG_API(printk("create session, bad cipher mode %d\n", sop.cmode)); + return -EINVAL; + } + DEBUG(printk("cryptocop_ioctl_create_session: setting CBC mode %d\n", ti_cipher.cipher_mode)); + switch (sop.des3_mode){ + case cryptocop_3des_eee: + case cryptocop_3des_eed: + case cryptocop_3des_ede: + case cryptocop_3des_edd: + case cryptocop_3des_dee: + case cryptocop_3des_ded: + case cryptocop_3des_dde: + case cryptocop_3des_ddd: + ti_cipher.tdes_mode = sop.des3_mode; + break; + default: + DEBUG_API(printk("create session, bad 3DES mode %d\n", sop.des3_mode)); + return -EINVAL; + } + ti_cipher.tid = CRYPTOCOP_IOCTL_CIPHER_TID; + ti_cipher.next = tis; + tis = &ti_cipher; + } /* if (sop.cipher != cryptocop_cipher_none) */ + if (sop.digest != cryptocop_digest_none){ + DEBUG(printk("setting digest transform\n")); + switch (sop.digest){ + case cryptocop_digest_md5: + ti_digest.alg = cryptocop_alg_md5; + break; + case cryptocop_digest_sha1: + ti_digest.alg = cryptocop_alg_sha1; + break; + default: + DEBUG_API(printk("create session, bad digest algorithm %d\n", sop.digest)); + return -EINVAL; + } + ti_digest.tid = CRYPTOCOP_IOCTL_DIGEST_TID; + ti_digest.next = tis; + tis = &ti_digest; + } /* if (sop.digest != cryptocop_digest_none) */ + if (sop.csum != cryptocop_csum_none){ + DEBUG(printk("setting csum transform\n")); + switch (sop.csum){ + case cryptocop_csum_le: + case cryptocop_csum_be: + ti_csum.csum_mode = sop.csum; + break; + default: + DEBUG_API(printk("create session, bad checksum algorithm %d\n", sop.csum)); + return -EINVAL; + } + ti_csum.alg = cryptocop_alg_csum; + ti_csum.tid = CRYPTOCOP_IOCTL_CSUM_TID; + ti_csum.next = tis; + tis = &ti_csum; + } /* (sop.csum != cryptocop_csum_none) */ + dev = kmalloc(sizeof(struct cryptocop_private), GFP_KERNEL); + if (!dev){ + DEBUG_API(printk("create session, alloc dev\n")); + return -ENOMEM; + } + + err = cryptocop_new_session(&sid, tis, GFP_KERNEL); + DEBUG({ if (err) printk("create session, cryptocop_new_session %d\n", err);}); + + if (err) { + kfree(dev); + return err; + } + sess_op->ses_id = sid; + dev->sid = sid; + dev->next = filp->private_data; + filp->private_data = dev; + + return 0; +} + +static int cryptocop_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg) +{ + int err = 0; + if (_IOC_TYPE(cmd) != ETRAXCRYPTOCOP_IOCTYPE) { + DEBUG_API(printk("cryptocop_ioctl: wrong type\n")); + return -ENOTTY; + } + if (_IOC_NR(cmd) > CRYPTOCOP_IO_MAXNR){ + return -ENOTTY; + } + /* Access check of the argument. Some commands, e.g. create session and process op, + needs additional checks. Those are handled in the command handling functions. */ + if (_IOC_DIR(cmd) & _IOC_READ) + err = !access_ok(VERIFY_WRITE, (void *)arg, _IOC_SIZE(cmd)); + else if (_IOC_DIR(cmd) & _IOC_WRITE) + err = !access_ok(VERIFY_READ, (void *)arg, _IOC_SIZE(cmd)); + if (err) return -EFAULT; + + switch (cmd) { + case CRYPTOCOP_IO_CREATE_SESSION: + return cryptocop_ioctl_create_session(inode, filp, cmd, arg); + case CRYPTOCOP_IO_CLOSE_SESSION: + return cryptocop_ioctl_close_session(inode, filp, cmd, arg); + case CRYPTOCOP_IO_PROCESS_OP: + return cryptocop_ioctl_process(inode, filp, cmd, arg); + default: + DEBUG_API(printk("cryptocop_ioctl: unknown command\n")); + return -ENOTTY; + } + return 0; +} + + +#ifdef LDEBUG +static void print_dma_descriptors(struct cryptocop_int_operation *iop) +{ + struct cryptocop_dma_desc *cdesc_out = iop->cdesc_out; + struct cryptocop_dma_desc *cdesc_in = iop->cdesc_in; + int i; + + printk("print_dma_descriptors start\n"); + + printk("iop:\n"); + printk("\tsid: 0x%lld\n", iop->sid); + + printk("\tcdesc_out: 0x%p\n", iop->cdesc_out); + printk("\tcdesc_in: 0x%p\n", iop->cdesc_in); + printk("\tddesc_out: 0x%p\n", iop->ddesc_out); + printk("\tddesc_in: 0x%p\n", iop->ddesc_in); + + printk("\niop->ctx_out: 0x%p phys: 0x%p\n", &iop->ctx_out, (char*)virt_to_phys(&iop->ctx_out)); + printk("\tnext: 0x%p\n" + "\tsaved_data: 0x%p\n" + "\tsaved_data_buf: 0x%p\n", + iop->ctx_out.next, + iop->ctx_out.saved_data, + iop->ctx_out.saved_data_buf); + + printk("\niop->ctx_in: 0x%p phys: 0x%p\n", &iop->ctx_in, (char*)virt_to_phys(&iop->ctx_in)); + printk("\tnext: 0x%p\n" + "\tsaved_data: 0x%p\n" + "\tsaved_data_buf: 0x%p\n", + iop->ctx_in.next, + iop->ctx_in.saved_data, + iop->ctx_in.saved_data_buf); + + i = 0; + while (cdesc_out) { + dma_descr_data *td; + printk("cdesc_out %d, desc=0x%p\n", i, cdesc_out->dma_descr); + printk("\n\tvirt_to_phys(desc): 0x%p\n", (char*)virt_to_phys(cdesc_out->dma_descr)); + td = cdesc_out->dma_descr; + printk("\n\tbuf: 0x%p\n" + "\tafter: 0x%p\n" + "\tmd: 0x%04x\n" + "\tnext: 0x%p\n", + td->buf, + td->after, + td->md, + td->next); + printk("flags:\n" + "\twait:\t%d\n" + "\teol:\t%d\n" + "\touteop:\t%d\n" + "\tineop:\t%d\n" + "\tintr:\t%d\n", + td->wait, + td->eol, + td->out_eop, + td->in_eop, + td->intr); + cdesc_out = cdesc_out->next; + i++; + } + i = 0; + while (cdesc_in) { + dma_descr_data *td; + printk("cdesc_in %d, desc=0x%p\n", i, cdesc_in->dma_descr); + printk("\n\tvirt_to_phys(desc): 0x%p\n", (char*)virt_to_phys(cdesc_in->dma_descr)); + td = cdesc_in->dma_descr; + printk("\n\tbuf: 0x%p\n" + "\tafter: 0x%p\n" + "\tmd: 0x%04x\n" + "\tnext: 0x%p\n", + td->buf, + td->after, + td->md, + td->next); + printk("flags:\n" + "\twait:\t%d\n" + "\teol:\t%d\n" + "\touteop:\t%d\n" + "\tineop:\t%d\n" + "\tintr:\t%d\n", + td->wait, + td->eol, + td->out_eop, + td->in_eop, + td->intr); + cdesc_in = cdesc_in->next; + i++; + } + + printk("print_dma_descriptors end\n"); +} + + +static void print_strcop_crypto_op(struct strcop_crypto_op *cop) +{ + printk("print_strcop_crypto_op, 0x%p\n", cop); + + /* Indata. */ + printk("indata=0x%p\n" + "inlen=%d\n" + "do_cipher=%d\n" + "decrypt=%d\n" + "cipher_explicit=%d\n" + "cipher_start=%d\n" + "cipher_len=%d\n" + "outdata=0x%p\n" + "outlen=%d\n", + cop->indata, + cop->inlen, + cop->do_cipher, + cop->decrypt, + cop->cipher_explicit, + cop->cipher_start, + cop->cipher_len, + cop->cipher_outdata, + cop->cipher_outlen); + + printk("do_digest=%d\n" + "digest_start=%d\n" + "digest_len=%d\n", + cop->do_digest, + cop->digest_start, + cop->digest_len); + + printk("do_csum=%d\n" + "csum_start=%d\n" + "csum_len=%d\n", + cop->do_csum, + cop->csum_start, + cop->csum_len); +} + +static void print_cryptocop_operation(struct cryptocop_operation *cop) +{ + struct cryptocop_desc *d; + struct cryptocop_tfrm_cfg *tc; + struct cryptocop_desc_cfg *dc; + int i; + + printk("print_cryptocop_operation, cop=0x%p\n\n", cop); + printk("sid: %lld\n", cop->sid); + printk("operation_status=%d\n" + "use_dmalists=%d\n" + "in_interrupt=%d\n" + "fast_callback=%d\n", + cop->operation_status, + cop->use_dmalists, + cop->in_interrupt, + cop->fast_callback); + + if (cop->use_dmalists){ + print_user_dma_lists(&cop->list_op); + } else { + printk("cop->tfrm_op\n" + "tfrm_cfg=0x%p\n" + "desc=0x%p\n" + "indata=0x%p\n" + "incount=%d\n" + "inlen=%d\n" + "outdata=0x%p\n" + "outcount=%d\n" + "outlen=%d\n\n", + cop->tfrm_op.tfrm_cfg, + cop->tfrm_op.desc, + cop->tfrm_op.indata, + cop->tfrm_op.incount, + cop->tfrm_op.inlen, + cop->tfrm_op.outdata, + cop->tfrm_op.outcount, + cop->tfrm_op.outlen); + + tc = cop->tfrm_op.tfrm_cfg; + while (tc){ + printk("tfrm_cfg, 0x%p\n" + "tid=%d\n" + "flags=%d\n" + "inject_ix=%d\n" + "next=0x%p\n", + tc, + tc->tid, + tc->flags, + tc->inject_ix, + tc->next); + tc = tc->next; + } + d = cop->tfrm_op.desc; + while (d){ + printk("\n======================desc, 0x%p\n" + "length=%d\n" + "cfg=0x%p\n" + "next=0x%p\n", + d, + d->length, + d->cfg, + d->next); + dc = d->cfg; + while (dc){ + printk("=========desc_cfg, 0x%p\n" + "tid=%d\n" + "src=%d\n" + "last=%d\n" + "next=0x%p\n", + dc, + dc->tid, + dc->src, + dc->last, + dc->next); + dc = dc->next; + } + d = d->next; + } + printk("\n====iniov\n"); + for (i = 0; i < cop->tfrm_op.incount; i++){ + printk("indata[%d]\n" + "base=0x%p\n" + "len=%d\n", + i, + cop->tfrm_op.indata[i].iov_base, + cop->tfrm_op.indata[i].iov_len); + } + printk("\n====outiov\n"); + for (i = 0; i < cop->tfrm_op.outcount; i++){ + printk("outdata[%d]\n" + "base=0x%p\n" + "len=%d\n", + i, + cop->tfrm_op.outdata[i].iov_base, + cop->tfrm_op.outdata[i].iov_len); + } + } + printk("------------end print_cryptocop_operation\n"); +} + + +static void print_user_dma_lists(struct cryptocop_dma_list_operation *dma_op) +{ + dma_descr_data *dd; + int i; + + printk("print_user_dma_lists, dma_op=0x%p\n", dma_op); + + printk("out_data_buf = 0x%p, phys_to_virt(out_data_buf) = 0x%p\n", dma_op->out_data_buf, phys_to_virt((unsigned long int)dma_op->out_data_buf)); + printk("in_data_buf = 0x%p, phys_to_virt(in_data_buf) = 0x%p\n", dma_op->in_data_buf, phys_to_virt((unsigned long int)dma_op->in_data_buf)); + + printk("##############outlist\n"); + dd = phys_to_virt((unsigned long int)dma_op->outlist); + i = 0; + while (dd != NULL) { + printk("#%d phys_to_virt(desc) 0x%p\n", i, dd); + printk("\n\tbuf: 0x%p\n" + "\tafter: 0x%p\n" + "\tmd: 0x%04x\n" + "\tnext: 0x%p\n", + dd->buf, + dd->after, + dd->md, + dd->next); + printk("flags:\n" + "\twait:\t%d\n" + "\teol:\t%d\n" + "\touteop:\t%d\n" + "\tineop:\t%d\n" + "\tintr:\t%d\n", + dd->wait, + dd->eol, + dd->out_eop, + dd->in_eop, + dd->intr); + if (dd->eol) + dd = NULL; + else + dd = phys_to_virt((unsigned long int)dd->next); + ++i; + } + + printk("##############inlist\n"); + dd = phys_to_virt((unsigned long int)dma_op->inlist); + i = 0; + while (dd != NULL) { + printk("#%d phys_to_virt(desc) 0x%p\n", i, dd); + printk("\n\tbuf: 0x%p\n" + "\tafter: 0x%p\n" + "\tmd: 0x%04x\n" + "\tnext: 0x%p\n", + dd->buf, + dd->after, + dd->md, + dd->next); + printk("flags:\n" + "\twait:\t%d\n" + "\teol:\t%d\n" + "\touteop:\t%d\n" + "\tineop:\t%d\n" + "\tintr:\t%d\n", + dd->wait, + dd->eol, + dd->out_eop, + dd->in_eop, + dd->intr); + if (dd->eol) + dd = NULL; + else + dd = phys_to_virt((unsigned long int)dd->next); + ++i; + } +} + + +static void print_lock_status(void) +{ + printk("**********************print_lock_status\n"); + printk("cryptocop_completed_jobs_lock %d\n", spin_is_locked(&cryptocop_completed_jobs_lock)); + printk("cryptocop_job_queue_lock %d\n", spin_is_locked(&cryptocop_job_queue_lock)); + printk("descr_pool_lock %d\n", spin_is_locked(&descr_pool_lock)); + printk("cryptocop_sessions_lock %d\n", spin_is_locked(cryptocop_sessions_lock)); + printk("running_job_lock %d\n", spin_is_locked(running_job_lock)); + printk("cryptocop_process_lock %d\n", spin_is_locked(cryptocop_process_lock)); +} +#endif /* LDEBUG */ + + +static const char cryptocop_name[] = "ETRAX FS stream co-processor"; + +static int init_stream_coprocessor(void) +{ + int err; + int i; + static int initialized = 0; + + if (initialized) + return 0; + + initialized = 1; + + printk("ETRAX FS stream co-processor driver v0.01, (c) 2003 Axis Communications AB\n"); + + err = register_chrdev(CRYPTOCOP_MAJOR, cryptocop_name, &cryptocop_fops); + if (err < 0) { + printk(KERN_ERR "stream co-processor: could not get major number.\n"); + return err; + } + + err = init_cryptocop(); + if (err) { + (void)unregister_chrdev(CRYPTOCOP_MAJOR, cryptocop_name); + return err; + } + err = cryptocop_job_queue_init(); + if (err) { + release_cryptocop(); + (void)unregister_chrdev(CRYPTOCOP_MAJOR, cryptocop_name); + return err; + } + /* Init the descriptor pool. */ + for (i = 0; i < CRYPTOCOP_DESCRIPTOR_POOL_SIZE - 1; i++) { + descr_pool[i].from_pool = 1; + descr_pool[i].next = &descr_pool[i + 1]; + } + descr_pool[i].from_pool = 1; + descr_pool[i].next = NULL; + descr_pool_free_list = &descr_pool[0]; + descr_pool_no_free = CRYPTOCOP_DESCRIPTOR_POOL_SIZE; + + spin_lock_init(&cryptocop_completed_jobs_lock); + spin_lock_init(&cryptocop_job_queue_lock); + spin_lock_init(&descr_pool_lock); + spin_lock_init(&cryptocop_sessions_lock); + spin_lock_init(&running_job_lock); + spin_lock_init(&cryptocop_process_lock); + + cryptocop_sessions = NULL; + next_sid = 1; + + cryptocop_running_job = NULL; + + printk("stream co-processor: init done.\n"); + return 0; +} + +static void __exit exit_stream_coprocessor(void) +{ + release_cryptocop(); + cryptocop_job_queue_close(); +} + +module_init(init_stream_coprocessor); +module_exit(exit_stream_coprocessor); + diff --git a/arch/cris/arch-v32/drivers/gpio.c b/arch/cris/arch-v32/drivers/gpio.c new file mode 100644 index 000000000000..a551237dcb5e --- /dev/null +++ b/arch/cris/arch-v32/drivers/gpio.c @@ -0,0 +1,766 @@ +/* $Id: gpio.c,v 1.16 2005/06/19 17:06:49 starvik Exp $ + * + * ETRAX CRISv32 general port I/O device + * + * Copyright (c) 1999, 2000, 2001, 2002, 2003 Axis Communications AB + * + * Authors: Bjorn Wesen (initial version) + * Ola Knutsson (LED handling) + * Johan Adolfsson (read/set directions, write, port G, + * port to ETRAX FS. + * + * $Log: gpio.c,v $ + * Revision 1.16 2005/06/19 17:06:49 starvik + * Merge of Linux 2.6.12. + * + * Revision 1.15 2005/05/25 08:22:20 starvik + * Changed GPIO port order to fit packages/devices/axis-2.4. + * + * Revision 1.14 2005/04/24 18:35:08 starvik + * Updated with final register headers. + * + * Revision 1.13 2005/03/15 15:43:00 starvik + * dev_id needs to be supplied for shared IRQs. + * + * Revision 1.12 2005/03/10 17:12:00 starvik + * Protect alarm list with spinlock. + * + * Revision 1.11 2005/01/05 06:08:59 starvik + * No need to do local_irq_disable after local_irq_save. + * + * Revision 1.10 2004/11/19 08:38:31 starvik + * Removed old crap. + * + * Revision 1.9 2004/05/14 07:58:02 starvik + * Merge of changes from 2.4 + * + * Revision 1.8 2003/09/11 07:29:50 starvik + * Merge of Linux 2.6.0-test5 + * + * Revision 1.7 2003/07/10 13:25:46 starvik + * Compiles for 2.5.74 + * Lindented ethernet.c + * + * Revision 1.6 2003/07/04 08:27:46 starvik + * Merge of Linux 2.5.74 + * + * Revision 1.5 2003/06/10 08:26:37 johana + * Etrax -> ETRAX CRISv32 + * + * Revision 1.4 2003/06/05 14:22:48 johana + * Initialise some_alarms. + * + * Revision 1.3 2003/06/05 10:15:46 johana + * New INTR_VECT macros. + * Enable interrupts in global config. + * + * Revision 1.2 2003/06/03 15:52:50 johana + * Initial CRIS v32 version. + * + * Revision 1.1 2003/06/03 08:53:15 johana + * Copy of os/lx25/arch/cris/arch-v10/drivers/gpio.c version 1.7. + * + */ + +#include <linux/config.h> + +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/poll.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> + +#include <asm/etraxgpio.h> +#include <asm/arch/hwregs/reg_map.h> +#include <asm/arch/hwregs/reg_rdwr.h> +#include <asm/arch/hwregs/gio_defs.h> +#include <asm/arch/hwregs/intr_vect_defs.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/irq.h> + +/* The following gio ports on ETRAX FS is available: + * pa 8 bits, supports interrupts off, hi, low, set, posedge, negedge anyedge + * pb 18 bits + * pc 18 bits + * pd 18 bits + * pe 18 bits + * each port has a rw_px_dout, r_px_din and rw_px_oe register. + */ + +#define GPIO_MAJOR 120 /* experimental MAJOR number */ + +#define D(x) + +#if 0 +static int dp_cnt; +#define DP(x) do { dp_cnt++; if (dp_cnt % 1000 == 0) x; }while(0) +#else +#define DP(x) +#endif + +static char gpio_name[] = "etrax gpio"; + +#if 0 +static wait_queue_head_t *gpio_wq; +#endif + +static int gpio_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg); +static ssize_t gpio_write(struct file * file, const char * buf, size_t count, + loff_t *off); +static int gpio_open(struct inode *inode, struct file *filp); +static int gpio_release(struct inode *inode, struct file *filp); +static unsigned int gpio_poll(struct file *filp, struct poll_table_struct *wait); + +/* private data per open() of this driver */ + +struct gpio_private { + struct gpio_private *next; + /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */ + unsigned char clk_mask; + unsigned char data_mask; + unsigned char write_msb; + unsigned char pad1; + /* These fields are generic */ + unsigned long highalarm, lowalarm; + wait_queue_head_t alarm_wq; + int minor; +}; + +/* linked list of alarms to check for */ + +static struct gpio_private *alarmlist = 0; + +static int gpio_some_alarms = 0; /* Set if someone uses alarm */ +static unsigned long gpio_pa_high_alarms = 0; +static unsigned long gpio_pa_low_alarms = 0; + +static DEFINE_SPINLOCK(alarm_lock); + +#define NUM_PORTS (GPIO_MINOR_LAST+1) +#define GIO_REG_RD_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg ) +#define GIO_REG_WR_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg ) +unsigned long led_dummy; + +static volatile unsigned long *data_out[NUM_PORTS] = { + GIO_REG_WR_ADDR(rw_pa_dout), + GIO_REG_WR_ADDR(rw_pb_dout), + &led_dummy, + GIO_REG_WR_ADDR(rw_pc_dout), + GIO_REG_WR_ADDR(rw_pd_dout), + GIO_REG_WR_ADDR(rw_pe_dout), +}; + +static volatile unsigned long *data_in[NUM_PORTS] = { + GIO_REG_RD_ADDR(r_pa_din), + GIO_REG_RD_ADDR(r_pb_din), + &led_dummy, + GIO_REG_RD_ADDR(r_pc_din), + GIO_REG_RD_ADDR(r_pd_din), + GIO_REG_RD_ADDR(r_pe_din), +}; + +static unsigned long changeable_dir[NUM_PORTS] = { + CONFIG_ETRAX_PA_CHANGEABLE_DIR, + CONFIG_ETRAX_PB_CHANGEABLE_DIR, + 0, + CONFIG_ETRAX_PC_CHANGEABLE_DIR, + CONFIG_ETRAX_PD_CHANGEABLE_DIR, + CONFIG_ETRAX_PE_CHANGEABLE_DIR, +}; + +static unsigned long changeable_bits[NUM_PORTS] = { + CONFIG_ETRAX_PA_CHANGEABLE_BITS, + CONFIG_ETRAX_PB_CHANGEABLE_BITS, + 0, + CONFIG_ETRAX_PC_CHANGEABLE_BITS, + CONFIG_ETRAX_PD_CHANGEABLE_BITS, + CONFIG_ETRAX_PE_CHANGEABLE_BITS, +}; + +static volatile unsigned long *dir_oe[NUM_PORTS] = { + GIO_REG_WR_ADDR(rw_pa_oe), + GIO_REG_WR_ADDR(rw_pb_oe), + &led_dummy, + GIO_REG_WR_ADDR(rw_pc_oe), + GIO_REG_WR_ADDR(rw_pd_oe), + GIO_REG_WR_ADDR(rw_pe_oe), +}; + + + +static unsigned int +gpio_poll(struct file *file, + poll_table *wait) +{ + unsigned int mask = 0; + struct gpio_private *priv = (struct gpio_private *)file->private_data; + unsigned long data; + poll_wait(file, &priv->alarm_wq, wait); + if (priv->minor == GPIO_MINOR_A) { + reg_gio_rw_intr_cfg intr_cfg; + unsigned long tmp; + unsigned long flags; + + local_irq_save(flags); + data = REG_TYPE_CONV(unsigned long, reg_gio_r_pa_din, REG_RD(gio, regi_gio, r_pa_din)); + /* PA has support for interrupt + * lets activate high for those low and with highalarm set + */ + intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg); + + tmp = ~data & priv->highalarm & 0xFF; + if (tmp & (1 << 0)) { + intr_cfg.pa0 = regk_gio_hi; + } + if (tmp & (1 << 1)) { + intr_cfg.pa1 = regk_gio_hi; + } + if (tmp & (1 << 2)) { + intr_cfg.pa2 = regk_gio_hi; + } + if (tmp & (1 << 3)) { + intr_cfg.pa3 = regk_gio_hi; + } + if (tmp & (1 << 4)) { + intr_cfg.pa4 = regk_gio_hi; + } + if (tmp & (1 << 5)) { + intr_cfg.pa5 = regk_gio_hi; + } + if (tmp & (1 << 6)) { + intr_cfg.pa6 = regk_gio_hi; + } + if (tmp & (1 << 7)) { + intr_cfg.pa7 = regk_gio_hi; + } + /* + * lets activate low for those high and with lowalarm set + */ + tmp = data & priv->lowalarm & 0xFF; + if (tmp & (1 << 0)) { + intr_cfg.pa0 = regk_gio_lo; + } + if (tmp & (1 << 1)) { + intr_cfg.pa1 = regk_gio_lo; + } + if (tmp & (1 << 2)) { + intr_cfg.pa2 = regk_gio_lo; + } + if (tmp & (1 << 3)) { + intr_cfg.pa3 = regk_gio_lo; + } + if (tmp & (1 << 4)) { + intr_cfg.pa4 = regk_gio_lo; + } + if (tmp & (1 << 5)) { + intr_cfg.pa5 = regk_gio_lo; + } + if (tmp & (1 << 6)) { + intr_cfg.pa6 = regk_gio_lo; + } + if (tmp & (1 << 7)) { + intr_cfg.pa7 = regk_gio_lo; + } + + REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg); + local_irq_restore(flags); + } else if (priv->minor <= GPIO_MINOR_E) + data = *data_in[priv->minor]; + else + return 0; + + if ((data & priv->highalarm) || + (~data & priv->lowalarm)) { + mask = POLLIN|POLLRDNORM; + } + + DP(printk("gpio_poll ready: mask 0x%08X\n", mask)); + return mask; +} + +int etrax_gpio_wake_up_check(void) +{ + struct gpio_private *priv = alarmlist; + unsigned long data = 0; + int ret = 0; + while (priv) { + data = *data_in[priv->minor]; + if ((data & priv->highalarm) || + (~data & priv->lowalarm)) { + DP(printk("etrax_gpio_wake_up_check %i\n",priv->minor)); + wake_up_interruptible(&priv->alarm_wq); + ret = 1; + } + priv = priv->next; + } + return ret; +} + +static irqreturn_t +gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + if (gpio_some_alarms) { + return IRQ_RETVAL(etrax_gpio_wake_up_check()); + } + return IRQ_NONE; +} + +static irqreturn_t +gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + reg_gio_rw_intr_mask intr_mask; + reg_gio_r_masked_intr masked_intr; + reg_gio_rw_ack_intr ack_intr; + unsigned long tmp; + unsigned long tmp2; + + /* Find what PA interrupts are active */ + masked_intr = REG_RD(gio, regi_gio, r_masked_intr); + tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr); + + /* Find those that we have enabled */ + spin_lock(&alarm_lock); + tmp &= (gpio_pa_high_alarms | gpio_pa_low_alarms); + spin_unlock(&alarm_lock); + + /* Ack them */ + ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp); + REG_WR(gio, regi_gio, rw_ack_intr, ack_intr); + + /* Disable those interrupts.. */ + intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); + tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask); + tmp2 &= ~tmp; + intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2); + REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); + + if (gpio_some_alarms) { + return IRQ_RETVAL(etrax_gpio_wake_up_check()); + } + return IRQ_NONE; +} + + +static ssize_t gpio_write(struct file * file, const char * buf, size_t count, + loff_t *off) +{ + struct gpio_private *priv = (struct gpio_private *)file->private_data; + unsigned char data, clk_mask, data_mask, write_msb; + unsigned long flags; + unsigned long shadow; + volatile unsigned long *port; + ssize_t retval = count; + /* Only bits 0-7 may be used for write operations but allow all + devices except leds... */ + if (priv->minor == GPIO_MINOR_LEDS) { + return -EFAULT; + } + + if (!access_ok(VERIFY_READ, buf, count)) { + return -EFAULT; + } + clk_mask = priv->clk_mask; + data_mask = priv->data_mask; + /* It must have been configured using the IO_CFG_WRITE_MODE */ + /* Perhaps a better error code? */ + if (clk_mask == 0 || data_mask == 0) { + return -EPERM; + } + write_msb = priv->write_msb; + D(printk("gpio_write: %lu to data 0x%02X clk 0x%02X msb: %i\n",count, data_mask, clk_mask, write_msb)); + port = data_out[priv->minor]; + + while (count--) { + int i; + data = *buf++; + if (priv->write_msb) { + for (i = 7; i >= 0;i--) { + local_irq_save(flags); + shadow = *port; + *port = shadow &= ~clk_mask; + if (data & 1<<i) + *port = shadow |= data_mask; + else + *port = shadow &= ~data_mask; + /* For FPGA: min 5.0ns (DCC) before CCLK high */ + *port = shadow |= clk_mask; + local_irq_restore(flags); + } + } else { + for (i = 0; i <= 7;i++) { + local_irq_save(flags); + shadow = *port; + *port = shadow &= ~clk_mask; + if (data & 1<<i) + *port = shadow |= data_mask; + else + *port = shadow &= ~data_mask; + /* For FPGA: min 5.0ns (DCC) before CCLK high */ + *port = shadow |= clk_mask; + local_irq_restore(flags); + } + } + } + return retval; +} + + + +static int +gpio_open(struct inode *inode, struct file *filp) +{ + struct gpio_private *priv; + int p = MINOR(inode->i_rdev); + + if (p > GPIO_MINOR_LAST) + return -EINVAL; + + priv = (struct gpio_private *)kmalloc(sizeof(struct gpio_private), + GFP_KERNEL); + + if (!priv) + return -ENOMEM; + + priv->minor = p; + + /* initialize the io/alarm struct and link it into our alarmlist */ + + priv->next = alarmlist; + alarmlist = priv; + priv->clk_mask = 0; + priv->data_mask = 0; + priv->highalarm = 0; + priv->lowalarm = 0; + init_waitqueue_head(&priv->alarm_wq); + + filp->private_data = (void *)priv; + + return 0; +} + +static int +gpio_release(struct inode *inode, struct file *filp) +{ + struct gpio_private *p = alarmlist; + struct gpio_private *todel = (struct gpio_private *)filp->private_data; + /* local copies while updating them: */ + unsigned long a_high, a_low; + unsigned long some_alarms; + + /* unlink from alarmlist and free the private structure */ + + if (p == todel) { + alarmlist = todel->next; + } else { + while (p->next != todel) + p = p->next; + p->next = todel->next; + } + + kfree(todel); + /* Check if there are still any alarms set */ + p = alarmlist; + some_alarms = 0; + a_high = 0; + a_low = 0; + while (p) { + if (p->minor == GPIO_MINOR_A) { + a_high |= p->highalarm; + a_low |= p->lowalarm; + } + + if (p->highalarm | p->lowalarm) { + some_alarms = 1; + } + p = p->next; + } + + spin_lock(&alarm_lock); + gpio_some_alarms = some_alarms; + gpio_pa_high_alarms = a_high; + gpio_pa_low_alarms = a_low; + spin_unlock(&alarm_lock); + + return 0; +} + +/* Main device API. ioctl's to read/set/clear bits, as well as to + * set alarms to wait for using a subsequent select(). + */ + +unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg) +{ + /* Set direction 0=unchanged 1=input, + * return mask with 1=input + */ + unsigned long flags; + unsigned long dir_shadow; + + local_irq_save(flags); + dir_shadow = *dir_oe[priv->minor]; + dir_shadow &= ~(arg & changeable_dir[priv->minor]); + *dir_oe[priv->minor] = dir_shadow; + local_irq_restore(flags); + + if (priv->minor == GPIO_MINOR_A) + dir_shadow ^= 0xFF; /* Only 8 bits */ + else + dir_shadow ^= 0x3FFFF; /* Only 18 bits */ + return dir_shadow; + +} /* setget_input */ + +unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg) +{ + unsigned long flags; + unsigned long dir_shadow; + + local_irq_save(flags); + dir_shadow = *dir_oe[priv->minor]; + dir_shadow |= (arg & changeable_dir[priv->minor]); + *dir_oe[priv->minor] = dir_shadow; + local_irq_restore(flags); + return dir_shadow; +} /* setget_output */ + +static int +gpio_leds_ioctl(unsigned int cmd, unsigned long arg); + +static int +gpio_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + unsigned long flags; + unsigned long val; + unsigned long shadow; + struct gpio_private *priv = (struct gpio_private *)file->private_data; + if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) { + return -EINVAL; + } + + switch (_IOC_NR(cmd)) { + case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ + // read the port + return *data_in[priv->minor]; + break; + case IO_SETBITS: + local_irq_save(flags); + if (arg & 0x04) + printk("GPIO SET 2\n"); + // set changeable bits with a 1 in arg + shadow = *data_out[priv->minor]; + shadow |= (arg & changeable_bits[priv->minor]); + *data_out[priv->minor] = shadow; + local_irq_restore(flags); + break; + case IO_CLRBITS: + local_irq_save(flags); + if (arg & 0x04) + printk("GPIO CLR 2\n"); + // clear changeable bits with a 1 in arg + shadow = *data_out[priv->minor]; + shadow &= ~(arg & changeable_bits[priv->minor]); + *data_out[priv->minor] = shadow; + local_irq_restore(flags); + break; + case IO_HIGHALARM: + // set alarm when bits with 1 in arg go high + priv->highalarm |= arg; + spin_lock(&alarm_lock); + gpio_some_alarms = 1; + if (priv->minor == GPIO_MINOR_A) { + gpio_pa_high_alarms |= arg; + } + spin_unlock(&alarm_lock); + break; + case IO_LOWALARM: + // set alarm when bits with 1 in arg go low + priv->lowalarm |= arg; + spin_lock(&alarm_lock); + gpio_some_alarms = 1; + if (priv->minor == GPIO_MINOR_A) { + gpio_pa_low_alarms |= arg; + } + spin_unlock(&alarm_lock); + break; + case IO_CLRALARM: + // clear alarm for bits with 1 in arg + priv->highalarm &= ~arg; + priv->lowalarm &= ~arg; + spin_lock(&alarm_lock); + if (priv->minor == GPIO_MINOR_A) { + if (gpio_pa_high_alarms & arg || + gpio_pa_low_alarms & arg) { + /* Must update the gpio_pa_*alarms masks */ + } + } + spin_unlock(&alarm_lock); + break; + case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ + /* Read direction 0=input 1=output */ + return *dir_oe[priv->minor]; + case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */ + /* Set direction 0=unchanged 1=input, + * return mask with 1=input + */ + return setget_input(priv, arg); + break; + case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */ + /* Set direction 0=unchanged 1=output, + * return mask with 1=output + */ + return setget_output(priv, arg); + + case IO_CFG_WRITE_MODE: + { + unsigned long dir_shadow; + dir_shadow = *dir_oe[priv->minor]; + + priv->clk_mask = arg & 0xFF; + priv->data_mask = (arg >> 8) & 0xFF; + priv->write_msb = (arg >> 16) & 0x01; + /* Check if we're allowed to change the bits and + * the direction is correct + */ + if (!((priv->clk_mask & changeable_bits[priv->minor]) && + (priv->data_mask & changeable_bits[priv->minor]) && + (priv->clk_mask & dir_shadow) && + (priv->data_mask & dir_shadow))) + { + priv->clk_mask = 0; + priv->data_mask = 0; + return -EPERM; + } + break; + } + case IO_READ_INBITS: + /* *arg is result of reading the input pins */ + val = *data_in[priv->minor]; + if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + return -EFAULT; + return 0; + break; + case IO_READ_OUTBITS: + /* *arg is result of reading the output shadow */ + val = *data_out[priv->minor]; + if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + return -EFAULT; + break; + case IO_SETGET_INPUT: + /* bits set in *arg is set to input, + * *arg updated with current input pins. + */ + if (copy_from_user(&val, (unsigned long*)arg, sizeof(val))) + return -EFAULT; + val = setget_input(priv, val); + if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + return -EFAULT; + break; + case IO_SETGET_OUTPUT: + /* bits set in *arg is set to output, + * *arg updated with current output pins. + */ + if (copy_from_user(&val, (unsigned long*)arg, sizeof(val))) + return -EFAULT; + val = setget_output(priv, val); + if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + return -EFAULT; + break; + default: + if (priv->minor == GPIO_MINOR_LEDS) + return gpio_leds_ioctl(cmd, arg); + else + return -EINVAL; + } /* switch */ + + return 0; +} + +static int +gpio_leds_ioctl(unsigned int cmd, unsigned long arg) +{ + unsigned char green; + unsigned char red; + + switch (_IOC_NR(cmd)) { + case IO_LEDACTIVE_SET: + green = ((unsigned char) arg) & 1; + red = (((unsigned char) arg) >> 1) & 1; + LED_ACTIVE_SET_G(green); + LED_ACTIVE_SET_R(red); + break; + + default: + return -EINVAL; + } /* switch */ + + return 0; +} + +struct file_operations gpio_fops = { + .owner = THIS_MODULE, + .poll = gpio_poll, + .ioctl = gpio_ioctl, + .write = gpio_write, + .open = gpio_open, + .release = gpio_release, +}; + + +/* main driver initialization routine, called from mem.c */ + +static __init int +gpio_init(void) +{ + int res; + reg_intr_vect_rw_mask intr_mask; + + /* do the formalities */ + + res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops); + if (res < 0) { + printk(KERN_ERR "gpio: couldn't get a major number.\n"); + return res; + } + + /* Clear all leds */ + LED_NETWORK_SET(0); + LED_ACTIVE_SET(0); + LED_DISK_READ(0); + LED_DISK_WRITE(0); + + printk("ETRAX FS GPIO driver v2.5, (c) 2003-2005 Axis Communications AB\n"); + /* We call etrax_gpio_wake_up_check() from timer interrupt and + * from cpu_idle() in kernel/process.c + * The check in cpu_idle() reduces latency from ~15 ms to ~6 ms + * in some tests. + */ + if (request_irq(TIMER_INTR_VECT, gpio_poll_timer_interrupt, + SA_SHIRQ | SA_INTERRUPT,"gpio poll", &alarmlist)) { + printk("err: timer0 irq for gpio\n"); + } + if (request_irq(GEN_IO_INTR_VECT, gpio_pa_interrupt, + SA_SHIRQ | SA_INTERRUPT,"gpio PA", &alarmlist)) { + printk("err: PA irq for gpio\n"); + } + /* enable the gio and timer irq in global config */ + intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); + intr_mask.timer = 1; + intr_mask.gen_io = 1; + REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); + + return res; +} + +/* this makes sure that gpio_init is called during kernel boot */ + +module_init(gpio_init); diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c new file mode 100644 index 000000000000..440c20a94963 --- /dev/null +++ b/arch/cris/arch-v32/drivers/i2c.c @@ -0,0 +1,611 @@ +/*!*************************************************************************** +*! +*! FILE NAME : i2c.c +*! +*! DESCRIPTION: implements an interface for IIC/I2C, both directly from other +*! kernel modules (i2c_writereg/readreg) and from userspace using +*! ioctl()'s +*! +*! Nov 30 1998 Torbjorn Eliasson Initial version. +*! Bjorn Wesen Elinux kernel version. +*! Jan 14 2000 Johan Adolfsson Fixed PB shadow register stuff - +*! don't use PB_I2C if DS1302 uses same bits, +*! use PB. +*| June 23 2003 Pieter Grimmerink Added 'i2c_sendnack'. i2c_readreg now +*| generates nack on last received byte, +*| instead of ack. +*| i2c_getack changed data level while clock +*| was high, causing DS75 to see a stop condition +*! +*! --------------------------------------------------------------------------- +*! +*! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN +*! +*!***************************************************************************/ +/* $Id: i2c.c,v 1.2 2005/05/09 15:29:49 starvik Exp $ */ +/****************** INCLUDE FILES SECTION ***********************************/ + +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/config.h> + +#include <asm/etraxi2c.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/delay.h> + +#include "i2c.h" + +/****************** I2C DEFINITION SECTION *************************/ + +#define D(x) + +#define I2C_MAJOR 123 /* LOCAL/EXPERIMENTAL */ +static const char i2c_name[] = "i2c"; + +#define CLOCK_LOW_TIME 8 +#define CLOCK_HIGH_TIME 8 +#define START_CONDITION_HOLD_TIME 8 +#define STOP_CONDITION_HOLD_TIME 8 +#define ENABLE_OUTPUT 0x01 +#define ENABLE_INPUT 0x00 +#define I2C_CLOCK_HIGH 1 +#define I2C_CLOCK_LOW 0 +#define I2C_DATA_HIGH 1 +#define I2C_DATA_LOW 0 + +#define i2c_enable() +#define i2c_disable() + +/* enable or disable output-enable, to select output or input on the i2c bus */ + +#define i2c_dir_out() crisv32_io_set_dir(&cris_i2c_data, crisv32_io_dir_out) +#define i2c_dir_in() crisv32_io_set_dir(&cris_i2c_data, crisv32_io_dir_in) + +/* control the i2c clock and data signals */ + +#define i2c_clk(x) crisv32_io_set(&cris_i2c_clk, x) +#define i2c_data(x) crisv32_io_set(&cris_i2c_data, x) + +/* read a bit from the i2c interface */ + +#define i2c_getbit() crisv32_io_rd(&cris_i2c_data) + +#define i2c_delay(usecs) udelay(usecs) + +/****************** VARIABLE SECTION ************************************/ + +static struct crisv32_iopin cris_i2c_clk; +static struct crisv32_iopin cris_i2c_data; + +/****************** FUNCTION DEFINITION SECTION *************************/ + + +/* generate i2c start condition */ + +void +i2c_start(void) +{ + /* + * SCL=1 SDA=1 + */ + i2c_dir_out(); + i2c_delay(CLOCK_HIGH_TIME/6); + i2c_data(I2C_DATA_HIGH); + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME); + /* + * SCL=1 SDA=0 + */ + i2c_data(I2C_DATA_LOW); + i2c_delay(START_CONDITION_HOLD_TIME); + /* + * SCL=0 SDA=0 + */ + i2c_clk(I2C_CLOCK_LOW); + i2c_delay(CLOCK_LOW_TIME); +} + +/* generate i2c stop condition */ + +void +i2c_stop(void) +{ + i2c_dir_out(); + + /* + * SCL=0 SDA=0 + */ + i2c_clk(I2C_CLOCK_LOW); + i2c_data(I2C_DATA_LOW); + i2c_delay(CLOCK_LOW_TIME*2); + /* + * SCL=1 SDA=0 + */ + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME*2); + /* + * SCL=1 SDA=1 + */ + i2c_data(I2C_DATA_HIGH); + i2c_delay(STOP_CONDITION_HOLD_TIME); + + i2c_dir_in(); +} + +/* write a byte to the i2c interface */ + +void +i2c_outbyte(unsigned char x) +{ + int i; + + i2c_dir_out(); + + for (i = 0; i < 8; i++) { + if (x & 0x80) { + i2c_data(I2C_DATA_HIGH); + } else { + i2c_data(I2C_DATA_LOW); + } + + i2c_delay(CLOCK_LOW_TIME/2); + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME); + i2c_clk(I2C_CLOCK_LOW); + i2c_delay(CLOCK_LOW_TIME/2); + x <<= 1; + } + i2c_data(I2C_DATA_LOW); + i2c_delay(CLOCK_LOW_TIME/2); + + /* + * enable input + */ + i2c_dir_in(); +} + +/* read a byte from the i2c interface */ + +unsigned char +i2c_inbyte(void) +{ + unsigned char aBitByte = 0; + int i; + + /* Switch off I2C to get bit */ + i2c_disable(); + i2c_dir_in(); + i2c_delay(CLOCK_HIGH_TIME/2); + + /* Get bit */ + aBitByte |= i2c_getbit(); + + /* Enable I2C */ + i2c_enable(); + i2c_delay(CLOCK_LOW_TIME/2); + + for (i = 1; i < 8; i++) { + aBitByte <<= 1; + /* Clock pulse */ + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME); + i2c_clk(I2C_CLOCK_LOW); + i2c_delay(CLOCK_LOW_TIME); + + /* Switch off I2C to get bit */ + i2c_disable(); + i2c_dir_in(); + i2c_delay(CLOCK_HIGH_TIME/2); + + /* Get bit */ + aBitByte |= i2c_getbit(); + + /* Enable I2C */ + i2c_enable(); + i2c_delay(CLOCK_LOW_TIME/2); + } + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME); + + /* + * we leave the clock low, getbyte is usually followed + * by sendack/nack, they assume the clock to be low + */ + i2c_clk(I2C_CLOCK_LOW); + return aBitByte; +} + +/*#--------------------------------------------------------------------------- +*# +*# FUNCTION NAME: i2c_getack +*# +*# DESCRIPTION : checks if ack was received from ic2 +*# +*#--------------------------------------------------------------------------*/ + +int +i2c_getack(void) +{ + int ack = 1; + /* + * enable output + */ + i2c_dir_out(); + /* + * Release data bus by setting + * data high + */ + i2c_data(I2C_DATA_HIGH); + /* + * enable input + */ + i2c_dir_in(); + i2c_delay(CLOCK_HIGH_TIME/4); + /* + * generate ACK clock pulse + */ + i2c_clk(I2C_CLOCK_HIGH); + /* + * Use PORT PB instead of I2C + * for input. (I2C not working) + */ + i2c_clk(1); + i2c_data(1); + /* + * switch off I2C + */ + i2c_data(1); + i2c_disable(); + i2c_dir_in(); + /* + * now wait for ack + */ + i2c_delay(CLOCK_HIGH_TIME/2); + /* + * check for ack + */ + if(i2c_getbit()) + ack = 0; + i2c_delay(CLOCK_HIGH_TIME/2); + if(!ack){ + if(!i2c_getbit()) /* receiver pulld SDA low */ + ack = 1; + i2c_delay(CLOCK_HIGH_TIME/2); + } + + /* + * our clock is high now, make sure data is low + * before we enable our output. If we keep data high + * and enable output, we would generate a stop condition. + */ + i2c_data(I2C_DATA_LOW); + + /* + * end clock pulse + */ + i2c_enable(); + i2c_dir_out(); + i2c_clk(I2C_CLOCK_LOW); + i2c_delay(CLOCK_HIGH_TIME/4); + /* + * enable output + */ + i2c_dir_out(); + /* + * remove ACK clock pulse + */ + i2c_data(I2C_DATA_HIGH); + i2c_delay(CLOCK_LOW_TIME/2); + return ack; +} + +/*#--------------------------------------------------------------------------- +*# +*# FUNCTION NAME: I2C::sendAck +*# +*# DESCRIPTION : Send ACK on received data +*# +*#--------------------------------------------------------------------------*/ +void +i2c_sendack(void) +{ + /* + * enable output + */ + i2c_delay(CLOCK_LOW_TIME); + i2c_dir_out(); + /* + * set ack pulse high + */ + i2c_data(I2C_DATA_LOW); + /* + * generate clock pulse + */ + i2c_delay(CLOCK_HIGH_TIME/6); + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME); + i2c_clk(I2C_CLOCK_LOW); + i2c_delay(CLOCK_LOW_TIME/6); + /* + * reset data out + */ + i2c_data(I2C_DATA_HIGH); + i2c_delay(CLOCK_LOW_TIME); + + i2c_dir_in(); +} + +/*#--------------------------------------------------------------------------- +*# +*# FUNCTION NAME: i2c_sendnack +*# +*# DESCRIPTION : Sends NACK on received data +*# +*#--------------------------------------------------------------------------*/ +void +i2c_sendnack(void) +{ + /* + * enable output + */ + i2c_delay(CLOCK_LOW_TIME); + i2c_dir_out(); + /* + * set data high + */ + i2c_data(I2C_DATA_HIGH); + /* + * generate clock pulse + */ + i2c_delay(CLOCK_HIGH_TIME/6); + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME); + i2c_clk(I2C_CLOCK_LOW); + i2c_delay(CLOCK_LOW_TIME); + + i2c_dir_in(); +} + +/*#--------------------------------------------------------------------------- +*# +*# FUNCTION NAME: i2c_writereg +*# +*# DESCRIPTION : Writes a value to an I2C device +*# +*#--------------------------------------------------------------------------*/ +int +i2c_writereg(unsigned char theSlave, unsigned char theReg, + unsigned char theValue) +{ + int error, cntr = 3; + unsigned long flags; + + do { + error = 0; + /* + * we don't like to be interrupted + */ + local_irq_save(flags); + + i2c_start(); + /* + * send slave address + */ + i2c_outbyte((theSlave & 0xfe)); + /* + * wait for ack + */ + if(!i2c_getack()) + error = 1; + /* + * now select register + */ + i2c_dir_out(); + i2c_outbyte(theReg); + /* + * now it's time to wait for ack + */ + if(!i2c_getack()) + error |= 2; + /* + * send register register data + */ + i2c_outbyte(theValue); + /* + * now it's time to wait for ack + */ + if(!i2c_getack()) + error |= 4; + /* + * end byte stream + */ + i2c_stop(); + /* + * enable interrupt again + */ + local_irq_restore(flags); + + } while(error && cntr--); + + i2c_delay(CLOCK_LOW_TIME); + + return -error; +} + +/*#--------------------------------------------------------------------------- +*# +*# FUNCTION NAME: i2c_readreg +*# +*# DESCRIPTION : Reads a value from the decoder registers. +*# +*#--------------------------------------------------------------------------*/ +unsigned char +i2c_readreg(unsigned char theSlave, unsigned char theReg) +{ + unsigned char b = 0; + int error, cntr = 3; + unsigned long flags; + + do { + error = 0; + /* + * we don't like to be interrupted + */ + local_irq_save(flags); + /* + * generate start condition + */ + i2c_start(); + + /* + * send slave address + */ + i2c_outbyte((theSlave & 0xfe)); + /* + * wait for ack + */ + if(!i2c_getack()) + error = 1; + /* + * now select register + */ + i2c_dir_out(); + i2c_outbyte(theReg); + /* + * now it's time to wait for ack + */ + if(!i2c_getack()) + error = 1; + /* + * repeat start condition + */ + i2c_delay(CLOCK_LOW_TIME); + i2c_start(); + /* + * send slave address + */ + i2c_outbyte(theSlave | 0x01); + /* + * wait for ack + */ + if(!i2c_getack()) + error = 1; + /* + * fetch register + */ + b = i2c_inbyte(); + /* + * last received byte needs to be nacked + * instead of acked + */ + i2c_sendnack(); + /* + * end sequence + */ + i2c_stop(); + /* + * enable interrupt again + */ + local_irq_restore(flags); + + } while(error && cntr--); + + return b; +} + +static int +i2c_open(struct inode *inode, struct file *filp) +{ + return 0; +} + +static int +i2c_release(struct inode *inode, struct file *filp) +{ + return 0; +} + +/* Main device API. ioctl's to write or read to/from i2c registers. + */ + +static int +i2c_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) { + return -EINVAL; + } + + switch (_IOC_NR(cmd)) { + case I2C_WRITEREG: + /* write to an i2c slave */ + D(printk("i2cw %d %d %d\n", + I2C_ARGSLAVE(arg), + I2C_ARGREG(arg), + I2C_ARGVALUE(arg))); + + return i2c_writereg(I2C_ARGSLAVE(arg), + I2C_ARGREG(arg), + I2C_ARGVALUE(arg)); + case I2C_READREG: + { + unsigned char val; + /* read from an i2c slave */ + D(printk("i2cr %d %d ", + I2C_ARGSLAVE(arg), + I2C_ARGREG(arg))); + val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg)); + D(printk("= %d\n", val)); + return val; + } + default: + return -EINVAL; + + } + + return 0; +} + +static struct file_operations i2c_fops = { + owner: THIS_MODULE, + ioctl: i2c_ioctl, + open: i2c_open, + release: i2c_release, +}; + +int __init +i2c_init(void) +{ + int res; + + /* Setup and enable the Port B I2C interface */ + + crisv32_io_get_name(&cris_i2c_data, CONFIG_ETRAX_I2C_DATA_PORT); + crisv32_io_get_name(&cris_i2c_clk, CONFIG_ETRAX_I2C_CLK_PORT); + + /* register char device */ + + res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops); + if(res < 0) { + printk(KERN_ERR "i2c: couldn't get a major number.\n"); + return res; + } + + printk(KERN_INFO "I2C driver v2.2, (c) 1999-2001 Axis Communications AB\n"); + + return 0; +} + +/* this makes sure that i2c_init is called during boot */ + +module_init(i2c_init); + +/****************** END OF FILE i2c.c ********************************/ diff --git a/arch/cris/arch-v32/drivers/i2c.h b/arch/cris/arch-v32/drivers/i2c.h new file mode 100644 index 000000000000..bfe1a13f9f35 --- /dev/null +++ b/arch/cris/arch-v32/drivers/i2c.h @@ -0,0 +1,15 @@ + +#include <linux/init.h> + +/* High level I2C actions */ +int __init i2c_init(void); +int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue); +unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg); + +/* Low level I2C */ +void i2c_start(void); +void i2c_stop(void); +void i2c_outbyte(unsigned char x); +unsigned char i2c_inbyte(void); +int i2c_getack(void); +void i2c_sendack(void); diff --git a/arch/cris/arch-v32/drivers/iop_fw_load.c b/arch/cris/arch-v32/drivers/iop_fw_load.c new file mode 100644 index 000000000000..11f9895ded50 --- /dev/null +++ b/arch/cris/arch-v32/drivers/iop_fw_load.c @@ -0,0 +1,219 @@ +/* $Id: iop_fw_load.c,v 1.4 2005/04/07 09:27:46 larsv Exp $ + * + * Firmware loader for ETRAX FS IO-Processor + * + * Copyright (C) 2004 Axis Communications AB + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/firmware.h> + +#include <asm/arch/hwregs/reg_map.h> +#include <asm/arch/hwregs/iop/iop_reg_space.h> +#include <asm/arch/hwregs/iop/iop_mpu_macros.h> +#include <asm/arch/hwregs/iop/iop_mpu_defs.h> +#include <asm/arch/hwregs/iop/iop_spu_defs.h> +#include <asm/arch/hwregs/iop/iop_sw_cpu_defs.h> + +#define IOP_TIMEOUT 100 + +static struct device iop_spu_device[2] = { + { .bus_id = "iop-spu0", }, + { .bus_id = "iop-spu1", }, +}; + +static struct device iop_mpu_device = { + .bus_id = "iop-mpu", +}; + +static int wait_mpu_idle(void) +{ + reg_iop_mpu_r_stat mpu_stat; + unsigned int timeout = IOP_TIMEOUT; + + do { + mpu_stat = REG_RD(iop_mpu, regi_iop_mpu, r_stat); + } while (mpu_stat.instr_reg_busy == regk_iop_mpu_yes && --timeout > 0); + if (timeout == 0) { + printk(KERN_ERR "Timeout waiting for MPU to be idle\n"); + return -EBUSY; + } + return 0; +} + +int iop_fw_load_spu(const unsigned char *fw_name, unsigned int spu_inst) +{ + reg_iop_sw_cpu_rw_mc_ctrl mc_ctrl = { + .wr_spu0_mem = regk_iop_sw_cpu_no, + .wr_spu1_mem = regk_iop_sw_cpu_no, + .size = 4, + .cmd = regk_iop_sw_cpu_reg_copy, + .keep_owner = regk_iop_sw_cpu_yes + }; + reg_iop_spu_rw_ctrl spu_ctrl = { + .en = regk_iop_spu_no, + .fsm = regk_iop_spu_no, + }; + reg_iop_sw_cpu_r_mc_stat mc_stat; + const struct firmware *fw_entry; + u32 *data; + unsigned int timeout; + int retval, i; + + if (spu_inst > 1) + return -ENODEV; + + /* get firmware */ + retval = request_firmware(&fw_entry, + fw_name, + &iop_spu_device[spu_inst]); + if (retval != 0) + { + printk(KERN_ERR + "iop_load_spu: Failed to load firmware \"%s\"\n", + fw_name); + return retval; + } + data = (u32 *) fw_entry->data; + + /* acquire ownership of memory controller */ + switch (spu_inst) { + case 0: + mc_ctrl.wr_spu0_mem = regk_iop_sw_cpu_yes; + REG_WR(iop_spu, regi_iop_spu0, rw_ctrl, spu_ctrl); + break; + case 1: + mc_ctrl.wr_spu1_mem = regk_iop_sw_cpu_yes; + REG_WR(iop_spu, regi_iop_spu1, rw_ctrl, spu_ctrl); + break; + } + timeout = IOP_TIMEOUT; + do { + REG_WR(iop_sw_cpu, regi_iop_sw_cpu, rw_mc_ctrl, mc_ctrl); + mc_stat = REG_RD(iop_sw_cpu, regi_iop_sw_cpu, r_mc_stat); + } while (mc_stat.owned_by_cpu == regk_iop_sw_cpu_no && --timeout > 0); + if (timeout == 0) { + printk(KERN_ERR "Timeout waiting to acquire MC\n"); + retval = -EBUSY; + goto out; + } + + /* write to SPU memory */ + for (i = 0; i < (fw_entry->size/4); i++) { + switch (spu_inst) { + case 0: + REG_WR_INT(iop_spu, regi_iop_spu0, rw_seq_pc, (i*4)); + break; + case 1: + REG_WR_INT(iop_spu, regi_iop_spu1, rw_seq_pc, (i*4)); + break; + } + REG_WR_INT(iop_sw_cpu, regi_iop_sw_cpu, rw_mc_data, *data); + data++; + } + + /* release ownership of memory controller */ + (void) REG_RD(iop_sw_cpu, regi_iop_sw_cpu, rs_mc_data); + + out: + release_firmware(fw_entry); + return retval; +} + +int iop_fw_load_mpu(unsigned char *fw_name) +{ + const unsigned int start_addr = 0; + reg_iop_mpu_rw_ctrl mpu_ctrl; + const struct firmware *fw_entry; + u32 *data; + int retval, i; + + /* get firmware */ + retval = request_firmware(&fw_entry, fw_name, &iop_mpu_device); + if (retval != 0) + { + printk(KERN_ERR + "iop_load_spu: Failed to load firmware \"%s\"\n", + fw_name); + return retval; + } + data = (u32 *) fw_entry->data; + + /* disable MPU */ + mpu_ctrl.en = regk_iop_mpu_no; + REG_WR(iop_mpu, regi_iop_mpu, rw_ctrl, mpu_ctrl); + /* put start address in R0 */ + REG_WR_VECT(iop_mpu, regi_iop_mpu, rw_r, 0, start_addr); + /* write to memory by executing 'SWX i, 4, R0' for each word */ + if ((retval = wait_mpu_idle()) != 0) + goto out; + REG_WR(iop_mpu, regi_iop_mpu, rw_instr, MPU_SWX_IIR_INSTR(0, 4, 0)); + for (i = 0; i < (fw_entry->size / 4); i++) { + REG_WR_INT(iop_mpu, regi_iop_mpu, rw_immediate, *data); + if ((retval = wait_mpu_idle()) != 0) + goto out; + data++; + } + + out: + release_firmware(fw_entry); + return retval; +} + +int iop_start_mpu(unsigned int start_addr) +{ + reg_iop_mpu_rw_ctrl mpu_ctrl = { .en = regk_iop_mpu_yes }; + int retval; + + /* disable MPU */ + if ((retval = wait_mpu_idle()) != 0) + goto out; + REG_WR(iop_mpu, regi_iop_mpu, rw_instr, MPU_HALT()); + if ((retval = wait_mpu_idle()) != 0) + goto out; + /* set PC and wait for it to bite */ + if ((retval = wait_mpu_idle()) != 0) + goto out; + REG_WR_INT(iop_mpu, regi_iop_mpu, rw_instr, MPU_BA_I(start_addr)); + if ((retval = wait_mpu_idle()) != 0) + goto out; + /* make sure the MPU starts executing with interrupts disabled */ + REG_WR(iop_mpu, regi_iop_mpu, rw_instr, MPU_DI()); + if ((retval = wait_mpu_idle()) != 0) + goto out; + /* enable MPU */ + REG_WR(iop_mpu, regi_iop_mpu, rw_ctrl, mpu_ctrl); + out: + return retval; +} + +static int __init iop_fw_load_init(void) +{ + device_initialize(&iop_spu_device[0]); + kobject_set_name(&iop_spu_device[0].kobj, "iop-spu0"); + kobject_add(&iop_spu_device[0].kobj); + device_initialize(&iop_spu_device[1]); + kobject_set_name(&iop_spu_device[1].kobj, "iop-spu1"); + kobject_add(&iop_spu_device[1].kobj); + device_initialize(&iop_mpu_device); + kobject_set_name(&iop_mpu_device.kobj, "iop-mpu"); + kobject_add(&iop_mpu_device.kobj); + return 0; +} + +static void __exit iop_fw_load_exit(void) +{ +} + +module_init(iop_fw_load_init); +module_exit(iop_fw_load_exit); + +MODULE_DESCRIPTION("ETRAX FS IO-Processor Firmware Loader"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(iop_fw_load_spu); +EXPORT_SYMBOL(iop_fw_load_mpu); +EXPORT_SYMBOL(iop_start_mpu); diff --git a/arch/cris/arch-v32/drivers/nandflash.c b/arch/cris/arch-v32/drivers/nandflash.c new file mode 100644 index 000000000000..fc2a619b035d --- /dev/null +++ b/arch/cris/arch-v32/drivers/nandflash.c @@ -0,0 +1,157 @@ +/* + * arch/cris/arch-v32/drivers/nandflash.c + * + * Copyright (c) 2004 + * + * Derived from drivers/mtd/nand/spia.c + * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) + * + * $Id: nandflash.c,v 1.3 2005/06/01 10:57:12 starvik Exp $ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/version.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <asm/arch/memmap.h> +#include <asm/arch/hwregs/reg_map.h> +#include <asm/arch/hwregs/reg_rdwr.h> +#include <asm/arch/hwregs/gio_defs.h> +#include <asm/arch/hwregs/bif_core_defs.h> +#include <asm/io.h> + +#define CE_BIT 4 +#define CLE_BIT 5 +#define ALE_BIT 6 +#define BY_BIT 7 + +static struct mtd_info *crisv32_mtd = NULL; +/* + * hardware specific access to control-lines +*/ +static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd) +{ + unsigned long flags; + reg_gio_rw_pa_dout dout = REG_RD(gio, regi_gio, rw_pa_dout); + + local_irq_save(flags); + switch(cmd){ + case NAND_CTL_SETCLE: + dout.data |= (1<<CLE_BIT); + break; + case NAND_CTL_CLRCLE: + dout.data &= ~(1<<CLE_BIT); + break; + case NAND_CTL_SETALE: + dout.data |= (1<<ALE_BIT); + break; + case NAND_CTL_CLRALE: + dout.data &= ~(1<<ALE_BIT); + break; + case NAND_CTL_SETNCE: + dout.data |= (1<<CE_BIT); + break; + case NAND_CTL_CLRNCE: + dout.data &= ~(1<<CE_BIT); + break; + } + REG_WR(gio, regi_gio, rw_pa_dout, dout); + local_irq_restore(flags); +} + +/* +* read device ready pin +*/ +int crisv32_device_ready(struct mtd_info *mtd) +{ + reg_gio_r_pa_din din = REG_RD(gio, regi_gio, r_pa_din); + return ((din.data & (1 << BY_BIT)) >> BY_BIT); +} + +/* + * Main initialization routine + */ +struct mtd_info* __init crisv32_nand_flash_probe (void) +{ + void __iomem *read_cs; + void __iomem *write_cs; + + reg_bif_core_rw_grp3_cfg bif_cfg = REG_RD(bif_core, regi_bif_core, rw_grp3_cfg); + reg_gio_rw_pa_oe pa_oe = REG_RD(gio, regi_gio, rw_pa_oe); + struct nand_chip *this; + int err = 0; + + /* Allocate memory for MTD device structure and private data */ + crisv32_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip), + GFP_KERNEL); + if (!crisv32_mtd) { + printk ("Unable to allocate CRISv32 NAND MTD device structure.\n"); + err = -ENOMEM; + return NULL; + } + + read_cs = ioremap(MEM_CSP0_START | MEM_NON_CACHEABLE, 8192); + write_cs = ioremap(MEM_CSP1_START | MEM_NON_CACHEABLE, 8192); + + if (!read_cs || !write_cs) { + printk("CRISv32 NAND ioremap failed\n"); + err = -EIO; + goto out_mtd; + } + + /* Get pointer to private data */ + this = (struct nand_chip *) (&crisv32_mtd[1]); + + pa_oe.oe |= 1 << CE_BIT; + pa_oe.oe |= 1 << ALE_BIT; + pa_oe.oe |= 1 << CLE_BIT; + pa_oe.oe &= ~ (1 << BY_BIT); + REG_WR(gio, regi_gio, rw_pa_oe, pa_oe); + + bif_cfg.gated_csp0 = regk_bif_core_rd; + bif_cfg.gated_csp1 = regk_bif_core_wr; + REG_WR(bif_core, regi_bif_core, rw_grp3_cfg, bif_cfg); + + /* Initialize structures */ + memset((char *) crisv32_mtd, 0, sizeof(struct mtd_info)); + memset((char *) this, 0, sizeof(struct nand_chip)); + + /* Link the private data with the MTD structure */ + crisv32_mtd->priv = this; + + /* Set address of NAND IO lines */ + this->IO_ADDR_R = read_cs; + this->IO_ADDR_W = write_cs; + this->hwcontrol = crisv32_hwcontrol; + this->dev_ready = crisv32_device_ready; + /* 20 us command delay time */ + this->chip_delay = 20; + this->eccmode = NAND_ECC_SOFT; + + /* Enable the following for a flash based bad block table */ + this->options = NAND_USE_FLASH_BBT; + + /* Scan to find existance of the device */ + if (nand_scan (crisv32_mtd, 1)) { + err = -ENXIO; + goto out_ior; + } + + return crisv32_mtd; + +out_ior: + iounmap((void *)read_cs); + iounmap((void *)write_cs); +out_mtd: + kfree (crisv32_mtd); + return NULL; +} + diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c new file mode 100644 index 000000000000..f894580b648b --- /dev/null +++ b/arch/cris/arch-v32/drivers/pcf8563.c @@ -0,0 +1,341 @@ +/* + * PCF8563 RTC + * + * From Phillips' datasheet: + * + * The PCF8563 is a CMOS real-time clock/calendar optimized for low power + * consumption. A programmable clock output, interupt output and voltage + * low detector are also provided. All address and data are transferred + * serially via two-line bidirectional I2C-bus. Maximum bus speed is + * 400 kbits/s. The built-in word address register is incremented + * automatically after each written or read byte. + * + * Copyright (c) 2002-2003, Axis Communications AB + * All rights reserved. + * + * Author: Tobias Anderberg <tobiasa@axis.com>. + * + */ + +#include <linux/config.h> +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/ioctl.h> +#include <linux/delay.h> +#include <linux/bcd.h> + +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/rtc.h> + +#include "i2c.h" + +#define PCF8563_MAJOR 121 /* Local major number. */ +#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */ +#define PCF8563_NAME "PCF8563" +#define DRIVER_VERSION "$Revision: 1.1 $" + +/* Two simple wrapper macros, saves a few keystrokes. */ +#define rtc_read(x) i2c_readreg(RTC_I2C_READ, x) +#define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y) + +static const unsigned char days_in_month[] = + { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; + +int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long); +int pcf8563_open(struct inode *, struct file *); +int pcf8563_release(struct inode *, struct file *); + +static struct file_operations pcf8563_fops = { + owner: THIS_MODULE, + ioctl: pcf8563_ioctl, + open: pcf8563_open, + release: pcf8563_release, +}; + +unsigned char +pcf8563_readreg(int reg) +{ + unsigned char res = rtc_read(reg); + + /* The PCF8563 does not return 0 for unimplemented bits */ + switch (reg) { + case RTC_SECONDS: + case RTC_MINUTES: + res &= 0x7F; + break; + case RTC_HOURS: + case RTC_DAY_OF_MONTH: + res &= 0x3F; + break; + case RTC_WEEKDAY: + res &= 0x07; + break; + case RTC_MONTH: + res &= 0x1F; + break; + case RTC_CONTROL1: + res &= 0xA8; + break; + case RTC_CONTROL2: + res &= 0x1F; + break; + case RTC_CLOCKOUT_FREQ: + case RTC_TIMER_CONTROL: + res &= 0x83; + break; + } + return res; +} + +void +pcf8563_writereg(int reg, unsigned char val) +{ +#ifdef CONFIG_ETRAX_RTC_READONLY + if (reg == RTC_CONTROL1 || (reg >= RTC_SECONDS && reg <= RTC_YEAR)) + return; +#endif + + rtc_write(reg, val); +} + +void +get_rtc_time(struct rtc_time *tm) +{ + tm->tm_sec = rtc_read(RTC_SECONDS); + tm->tm_min = rtc_read(RTC_MINUTES); + tm->tm_hour = rtc_read(RTC_HOURS); + tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH); + tm->tm_wday = rtc_read(RTC_WEEKDAY); + tm->tm_mon = rtc_read(RTC_MONTH); + tm->tm_year = rtc_read(RTC_YEAR); + + if (tm->tm_sec & 0x80) + printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " + "information is no longer guaranteed!\n", PCF8563_NAME); + + tm->tm_year = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0); + tm->tm_sec &= 0x7F; + tm->tm_min &= 0x7F; + tm->tm_hour &= 0x3F; + tm->tm_mday &= 0x3F; + tm->tm_wday &= 0x07; /* Not coded in BCD. */ + tm->tm_mon &= 0x1F; + + BCD_TO_BIN(tm->tm_sec); + BCD_TO_BIN(tm->tm_min); + BCD_TO_BIN(tm->tm_hour); + BCD_TO_BIN(tm->tm_mday); + BCD_TO_BIN(tm->tm_mon); + tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */ +} + +int __init +pcf8563_init(void) +{ + /* Initiate the i2c protocol. */ + i2c_init(); + + /* + * First of all we need to reset the chip. This is done by + * clearing control1, control2 and clk freq and resetting + * all alarms. + */ + if (rtc_write(RTC_CONTROL1, 0x00) < 0) + goto err; + + if (rtc_write(RTC_CONTROL2, 0x00) < 0) + goto err; + + if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0) + goto err; + + if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0) + goto err; + + /* Reset the alarms. */ + if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0) + goto err; + + if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0) + goto err; + + if (rtc_write(RTC_DAY_ALARM, 0x80) < 0) + goto err; + + if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0) + goto err; + + if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { + printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n", + PCF8563_NAME, PCF8563_MAJOR); + return -1; + } + + printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, DRIVER_VERSION); + + /* Check for low voltage, and warn about it.. */ + if (rtc_read(RTC_SECONDS) & 0x80) + printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " + "information is no longer guaranteed!\n", PCF8563_NAME); + + return 0; + +err: + printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME); + return -1; +} + +void __exit +pcf8563_exit(void) +{ + if (unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME) < 0) { + printk(KERN_INFO "%s: Unable to unregister device.\n", PCF8563_NAME); + } +} + +/* + * ioctl calls for this driver. Why return -ENOTTY upon error? Because + * POSIX says so! + */ +int +pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg) +{ + /* Some sanity checks. */ + if (_IOC_TYPE(cmd) != RTC_MAGIC) + return -ENOTTY; + + if (_IOC_NR(cmd) > RTC_MAX_IOCTL) + return -ENOTTY; + + switch (cmd) { + case RTC_RD_TIME: + { + struct rtc_time tm; + + memset(&tm, 0, sizeof (struct rtc_time)); + get_rtc_time(&tm); + + if (copy_to_user((struct rtc_time *) arg, &tm, sizeof tm)) { + return -EFAULT; + } + + return 0; + } + + case RTC_SET_TIME: + { +#ifdef CONFIG_ETRAX_RTC_READONLY + return -EPERM; +#else + int leap; + int year; + int century; + struct rtc_time tm; + + if (!capable(CAP_SYS_TIME)) + return -EPERM; + + if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof tm)) + return -EFAULT; + + /* Convert from struct tm to struct rtc_time. */ + tm.tm_year += 1900; + tm.tm_mon += 1; + + /* + * Check if tm.tm_year is a leap year. A year is a leap + * year if it is divisible by 4 but not 100, except + * that years divisible by 400 _are_ leap years. + */ + year = tm.tm_year; + leap = (tm.tm_mon == 2) && ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0); + + /* Perform some sanity checks. */ + if ((tm.tm_year < 1970) || + (tm.tm_mon > 12) || + (tm.tm_mday == 0) || + (tm.tm_mday > days_in_month[tm.tm_mon] + leap) || + (tm.tm_wday >= 7) || + (tm.tm_hour >= 24) || + (tm.tm_min >= 60) || + (tm.tm_sec >= 60)) + return -EINVAL; + + century = (tm.tm_year >= 2000) ? 0x80 : 0; + tm.tm_year = tm.tm_year % 100; + + BIN_TO_BCD(tm.tm_year); + BIN_TO_BCD(tm.tm_mday); + BIN_TO_BCD(tm.tm_hour); + BIN_TO_BCD(tm.tm_min); + BIN_TO_BCD(tm.tm_sec); + tm.tm_mon |= century; + + rtc_write(RTC_YEAR, tm.tm_year); + rtc_write(RTC_MONTH, tm.tm_mon); + rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */ + rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday); + rtc_write(RTC_HOURS, tm.tm_hour); + rtc_write(RTC_MINUTES, tm.tm_min); + rtc_write(RTC_SECONDS, tm.tm_sec); + + return 0; +#endif /* !CONFIG_ETRAX_RTC_READONLY */ + } + + case RTC_VLOW_RD: + { + int vl_bit = 0; + + if (rtc_read(RTC_SECONDS) & 0x80) { + vl_bit = 1; + printk(KERN_WARNING "%s: RTC Voltage Low - reliable " + "date/time information is no longer guaranteed!\n", + PCF8563_NAME); + } + if (copy_to_user((int *) arg, &vl_bit, sizeof(int))) + return -EFAULT; + + return 0; + } + + case RTC_VLOW_SET: + { + /* Clear the VL bit in the seconds register */ + int ret = rtc_read(RTC_SECONDS); + + rtc_write(RTC_SECONDS, (ret & 0x7F)); + + return 0; + } + + default: + return -ENOTTY; + } + + return 0; +} + +int +pcf8563_open(struct inode *inode, struct file *filp) +{ + MOD_INC_USE_COUNT; + return 0; +} + +int +pcf8563_release(struct inode *inode, struct file *filp) +{ + MOD_DEC_USE_COUNT; + return 0; +} + +module_init(pcf8563_init); +module_exit(pcf8563_exit); diff --git a/arch/cris/arch-v32/drivers/pci/Makefile b/arch/cris/arch-v32/drivers/pci/Makefile new file mode 100644 index 000000000000..bff7482f2444 --- /dev/null +++ b/arch/cris/arch-v32/drivers/pci/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for Etrax cardbus driver +# + +obj-$(CONFIG_ETRAX_CARDBUS) += bios.o dma.o diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c new file mode 100644 index 000000000000..24bc149889b6 --- /dev/null +++ b/arch/cris/arch-v32/drivers/pci/bios.c @@ -0,0 +1,131 @@ +#include <linux/pci.h> +#include <linux/kernel.h> +#include <asm/arch/hwregs/intr_vect.h> + +void __devinit pcibios_fixup_bus(struct pci_bus *b) +{ +} + +char * __devinit pcibios_setup(char *str) +{ + return NULL; +} + +void pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} + +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + unsigned long prot; + + /* Leave vm_pgoff as-is, the PCI space address is the physical + * address on this platform. + */ + vma->vm_flags |= (VM_SHM | VM_LOCKED | VM_IO); + + prot = pgprot_val(vma->vm_page_prot); + vma->vm_page_prot = __pgprot(prot); + + /* Write-combine setting is ignored, it is changed via the mtrr + * interfaces on this platform. + */ + if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot)) + return -EAGAIN; + + return 0; +} + +void +pcibios_align_resource(void *data, struct resource *res, + unsigned long size, unsigned long align) +{ + if (res->flags & IORESOURCE_IO) { + unsigned long start = res->start; + + if (start & 0x300) { + start = (start + 0x3ff) & ~0x3ff; + res->start = start; + } + } +} + +int pcibios_enable_resources(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for(idx=0; idx<6; idx++) { + /* Only set up the requested stuff */ + if (!(mask & (1<<idx))) + continue; + + r = &dev->resource[idx]; + if (!r->start && r->end) { + printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (dev->resource[PCI_ROM_RESOURCE].start) + cmd |= PCI_COMMAND_MEMORY; + if (cmd != old_cmd) { + printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +int pcibios_enable_irq(struct pci_dev *dev) +{ + dev->irq = EXT_INTR_VECT; + return 0; +} + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + int err; + + if ((err = pcibios_enable_resources(dev, mask)) < 0) + return err; + + return pcibios_enable_irq(dev); +} + +int pcibios_assign_resources(void) +{ + struct pci_dev *dev = NULL; + int idx; + struct resource *r; + + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + int class = dev->class >> 8; + + /* Don't touch classless devices and host bridges */ + if (!class || class == PCI_CLASS_BRIDGE_HOST) + continue; + + for(idx=0; idx<6; idx++) { + r = &dev->resource[idx]; + + if (!r->start && r->end) + pci_assign_resource(dev, idx); + } + } + return 0; +} + +EXPORT_SYMBOL(pcibios_assign_resources); diff --git a/arch/cris/arch-v32/drivers/pci/dma.c b/arch/cris/arch-v32/drivers/pci/dma.c new file mode 100644 index 000000000000..10329306d23c --- /dev/null +++ b/arch/cris/arch-v32/drivers/pci/dma.c @@ -0,0 +1,149 @@ +/* + * Dynamic DMA mapping support. + * + * On cris there is no hardware dynamic DMA address translation, + * so consistent alloc/free are merely page allocation/freeing. + * The rest of the dynamic DMA mapping interface is implemented + * in asm/pci.h. + * + * Borrowed from i386. + */ + +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/pci.h> +#include <asm/io.h> + +struct dma_coherent_mem { + void *virt_base; + u32 device_base; + int size; + int flags; + unsigned long *bitmap; +}; + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, unsigned int __nocast gfp) +{ + void *ret; + struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; + int order = get_order(size); + /* ignore region specifiers */ + gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); + + if (mem) { + int page = bitmap_find_free_region(mem->bitmap, mem->size, + order); + if (page >= 0) { + *dma_handle = mem->device_base + (page << PAGE_SHIFT); + ret = mem->virt_base + (page << PAGE_SHIFT); + memset(ret, 0, size); + return ret; + } + if (mem->flags & DMA_MEMORY_EXCLUSIVE) + return NULL; + } + + if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) + gfp |= GFP_DMA; + + ret = (void *)__get_free_pages(gfp, order); + + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = virt_to_phys(ret); + } + return ret; +} + +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; + int order = get_order(size); + + if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) { + int page = (vaddr - mem->virt_base) >> PAGE_SHIFT; + + bitmap_release_region(mem->bitmap, page, order); + } else + free_pages((unsigned long)vaddr, order); +} + +int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, + dma_addr_t device_addr, size_t size, int flags) +{ + void __iomem *mem_base; + int pages = size >> PAGE_SHIFT; + int bitmap_size = (pages + 31)/32; + + if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0) + goto out; + if (!size) + goto out; + if (dev->dma_mem) + goto out; + + /* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */ + + mem_base = ioremap(bus_addr, size); + if (!mem_base) + goto out; + + dev->dma_mem = kmalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL); + if (!dev->dma_mem) + goto out; + memset(dev->dma_mem, 0, sizeof(struct dma_coherent_mem)); + dev->dma_mem->bitmap = kmalloc(bitmap_size, GFP_KERNEL); + if (!dev->dma_mem->bitmap) + goto free1_out; + memset(dev->dma_mem->bitmap, 0, bitmap_size); + + dev->dma_mem->virt_base = mem_base; + dev->dma_mem->device_base = device_addr; + dev->dma_mem->size = pages; + dev->dma_mem->flags = flags; + + if (flags & DMA_MEMORY_MAP) + return DMA_MEMORY_MAP; + + return DMA_MEMORY_IO; + + free1_out: + kfree(dev->dma_mem->bitmap); + out: + return 0; +} +EXPORT_SYMBOL(dma_declare_coherent_memory); + +void dma_release_declared_memory(struct device *dev) +{ + struct dma_coherent_mem *mem = dev->dma_mem; + + if(!mem) + return; + dev->dma_mem = NULL; + iounmap(mem->virt_base); + kfree(mem->bitmap); + kfree(mem); +} +EXPORT_SYMBOL(dma_release_declared_memory); + +void *dma_mark_declared_memory_occupied(struct device *dev, + dma_addr_t device_addr, size_t size) +{ + struct dma_coherent_mem *mem = dev->dma_mem; + int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT; + int pos, err; + + if (!mem) + return ERR_PTR(-EINVAL); + + pos = (device_addr - mem->device_base) >> PAGE_SHIFT; + err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages)); + if (err != 0) + return ERR_PTR(err); + return mem->virt_base + (pos << PAGE_SHIFT); +} +EXPORT_SYMBOL(dma_mark_declared_memory_occupied); diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c new file mode 100644 index 000000000000..c85a6df8558f --- /dev/null +++ b/arch/cris/arch-v32/drivers/sync_serial.c @@ -0,0 +1,1283 @@ +/* + * Simple synchronous serial port driver for ETRAX FS. + * + * Copyright (c) 2005 Axis Communications AB + * + * Author: Mikael Starvik + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/config.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/major.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/poll.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/spinlock.h> + +#include <asm/io.h> +#include <asm/arch/dma.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/hwregs/reg_rdwr.h> +#include <asm/arch/hwregs/sser_defs.h> +#include <asm/arch/hwregs/dma_defs.h> +#include <asm/arch/hwregs/dma.h> +#include <asm/arch/hwregs/intr_vect_defs.h> +#include <asm/arch/hwregs/intr_vect.h> +#include <asm/arch/hwregs/reg_map.h> +#include <asm/sync_serial.h> + +/* The receiver is a bit tricky beacuse of the continuous stream of data.*/ +/* */ +/* Three DMA descriptors are linked together. Each DMA descriptor is */ +/* responsible for port->bufchunk of a common buffer. */ +/* */ +/* +---------------------------------------------+ */ +/* | +----------+ +----------+ +----------+ | */ +/* +-> | Descr[0] |-->| Descr[1] |-->| Descr[2] |-+ */ +/* +----------+ +----------+ +----------+ */ +/* | | | */ +/* v v v */ +/* +-------------------------------------+ */ +/* | BUFFER | */ +/* +-------------------------------------+ */ +/* |<- data_avail ->| */ +/* readp writep */ +/* */ +/* If the application keeps up the pace readp will be right after writep.*/ +/* If the application can't keep the pace we have to throw away data. */ +/* The idea is that readp should be ready with the data pointed out by */ +/* Descr[i] when the DMA has filled in Descr[i+1]. */ +/* Otherwise we will discard */ +/* the rest of the data pointed out by Descr1 and set readp to the start */ +/* of Descr2 */ + +#define SYNC_SERIAL_MAJOR 125 + +/* IN_BUFFER_SIZE should be a multiple of 6 to make sure that 24 bit */ +/* words can be handled */ +#define IN_BUFFER_SIZE 12288 +#define IN_DESCR_SIZE 256 +#define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE) +#define OUT_BUFFER_SIZE 4096 + +#define DEFAULT_FRAME_RATE 0 +#define DEFAULT_WORD_RATE 7 + +/* NOTE: Enabling some debug will likely cause overrun or underrun, + * especially if manual mode is use. + */ +#define DEBUG(x) +#define DEBUGREAD(x) +#define DEBUGWRITE(x) +#define DEBUGPOLL(x) +#define DEBUGRXINT(x) +#define DEBUGTXINT(x) + +typedef struct sync_port +{ + reg_scope_instances regi_sser; + reg_scope_instances regi_dmain; + reg_scope_instances regi_dmaout; + + char started; /* 1 if port has been started */ + char port_nbr; /* Port 0 or 1 */ + char busy; /* 1 if port is busy */ + + char enabled; /* 1 if port is enabled */ + char use_dma; /* 1 if port uses dma */ + char tr_running; + + char init_irqs; + int output; + int input; + + volatile unsigned int out_count; /* Remaining bytes for current transfer */ + unsigned char* outp; /* Current position in out_buffer */ + volatile unsigned char* volatile readp; /* Next byte to be read by application */ + volatile unsigned char* volatile writep; /* Next byte to be written by etrax */ + unsigned int in_buffer_size; + unsigned int inbufchunk; + unsigned char out_buffer[OUT_BUFFER_SIZE] __attribute__ ((aligned(32))); + unsigned char in_buffer[IN_BUFFER_SIZE]__attribute__ ((aligned(32))); + unsigned char flip[IN_BUFFER_SIZE] __attribute__ ((aligned(32))); + struct dma_descr_data* next_rx_desc; + struct dma_descr_data* prev_rx_desc; + int full; + + dma_descr_data in_descr[NUM_IN_DESCR] __attribute__ ((__aligned__(16))); + dma_descr_context in_context __attribute__ ((__aligned__(32))); + dma_descr_data out_descr __attribute__ ((__aligned__(16))); + dma_descr_context out_context __attribute__ ((__aligned__(32))); + wait_queue_head_t out_wait_q; + wait_queue_head_t in_wait_q; + + spinlock_t lock; +} sync_port; + +static int etrax_sync_serial_init(void); +static void initialize_port(int portnbr); +static inline int sync_data_avail(struct sync_port *port); + +static int sync_serial_open(struct inode *, struct file*); +static int sync_serial_release(struct inode*, struct file*); +static unsigned int sync_serial_poll(struct file *filp, poll_table *wait); + +static int sync_serial_ioctl(struct inode*, struct file*, + unsigned int cmd, unsigned long arg); +static ssize_t sync_serial_write(struct file * file, const char * buf, + size_t count, loff_t *ppos); +static ssize_t sync_serial_read(struct file *file, char *buf, + size_t count, loff_t *ppos); + +#if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ + defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ + (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ + defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)) +#define SYNC_SER_DMA +#endif + +static void send_word(sync_port* port); +static void start_dma(struct sync_port *port, const char* data, int count); +static void start_dma_in(sync_port* port); +#ifdef SYNC_SER_DMA +static irqreturn_t tr_interrupt(int irq, void *dev_id, struct pt_regs * regs); +static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs); +#endif + +#if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ + !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ + (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ + !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)) +#define SYNC_SER_MANUAL +#endif +#ifdef SYNC_SER_MANUAL +static irqreturn_t manual_interrupt(int irq, void *dev_id, struct pt_regs * regs); +#endif + +/* The ports */ +static struct sync_port ports[]= +{ + { + .regi_sser = regi_sser0, + .regi_dmaout = regi_dma4, + .regi_dmain = regi_dma5, +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA) + .use_dma = 1, +#else + .use_dma = 0, +#endif + }, + { + .regi_sser = regi_sser1, + .regi_dmaout = regi_dma6, + .regi_dmain = regi_dma7, +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA) + .use_dma = 1, +#else + .use_dma = 0, +#endif + } +}; + +#define NUMBER_OF_PORTS (sizeof(ports)/sizeof(sync_port)) + +static struct file_operations sync_serial_fops = { + .owner = THIS_MODULE, + .write = sync_serial_write, + .read = sync_serial_read, + .poll = sync_serial_poll, + .ioctl = sync_serial_ioctl, + .open = sync_serial_open, + .release = sync_serial_release +}; + +static int __init etrax_sync_serial_init(void) +{ + ports[0].enabled = 0; + ports[1].enabled = 0; + + if (register_chrdev(SYNC_SERIAL_MAJOR,"sync serial", &sync_serial_fops) <0 ) + { + printk("unable to get major for synchronous serial port\n"); + return -EBUSY; + } + + /* Initialize Ports */ +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) + if (crisv32_pinmux_alloc_fixed(pinmux_sser0)) + { + printk("Unable to allocate pins for syncrhronous serial port 0\n"); + return -EIO; + } + ports[0].enabled = 1; + initialize_port(0); +#endif + +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) + if (crisv32_pinmux_alloc_fixed(pinmux_sser1)) + { + printk("Unable to allocate pins for syncrhronous serial port 0\n"); + return -EIO; + } + ports[1].enabled = 1; + initialize_port(1); +#endif + + printk("ETRAX FS synchronous serial port driver\n"); + return 0; +} + +static void __init initialize_port(int portnbr) +{ + struct sync_port* port = &ports[portnbr]; + reg_sser_rw_cfg cfg = {0}; + reg_sser_rw_frm_cfg frm_cfg = {0}; + reg_sser_rw_tr_cfg tr_cfg = {0}; + reg_sser_rw_rec_cfg rec_cfg = {0}; + + DEBUG(printk("Init sync serial port %d\n", portnbr)); + + port->port_nbr = portnbr; + port->init_irqs = 1; + + port->outp = port->out_buffer; + port->output = 1; + port->input = 0; + + port->readp = port->flip; + port->writep = port->flip; + port->in_buffer_size = IN_BUFFER_SIZE; + port->inbufchunk = IN_DESCR_SIZE; + port->next_rx_desc = &port->in_descr[0]; + port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR-1]; + port->prev_rx_desc->eol = 1; + + init_waitqueue_head(&port->out_wait_q); + init_waitqueue_head(&port->in_wait_q); + + spin_lock_init(&port->lock); + + cfg.out_clk_src = regk_sser_intern_clk; + cfg.out_clk_pol = regk_sser_pos; + cfg.clk_od_mode = regk_sser_no; + cfg.clk_dir = regk_sser_out; + cfg.gate_clk = regk_sser_no; + cfg.base_freq = regk_sser_f29_493; + cfg.clk_div = 256; + REG_WR(sser, port->regi_sser, rw_cfg, cfg); + + frm_cfg.wordrate = DEFAULT_WORD_RATE; + frm_cfg.type = regk_sser_edge; + frm_cfg.frame_pin_dir = regk_sser_out; + frm_cfg.frame_pin_use = regk_sser_frm; + frm_cfg.status_pin_dir = regk_sser_in; + frm_cfg.status_pin_use = regk_sser_hold; + frm_cfg.out_on = regk_sser_tr; + frm_cfg.tr_delay = 1; + REG_WR(sser, port->regi_sser, rw_frm_cfg, frm_cfg); + + tr_cfg.urun_stop = regk_sser_no; + tr_cfg.sample_size = 7; + tr_cfg.sh_dir = regk_sser_msbfirst; + tr_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no; + tr_cfg.rate_ctrl = regk_sser_bulk; + tr_cfg.data_pin_use = regk_sser_dout; + tr_cfg.bulk_wspace = 1; + REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); + + rec_cfg.sample_size = 7; + rec_cfg.sh_dir = regk_sser_msbfirst; + rec_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no; + rec_cfg.fifo_thr = regk_sser_inf; + REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); +} + +static inline int sync_data_avail(struct sync_port *port) +{ + int avail; + unsigned char *start; + unsigned char *end; + + start = (unsigned char*)port->readp; /* cast away volatile */ + end = (unsigned char*)port->writep; /* cast away volatile */ + /* 0123456789 0123456789 + * ----- - ----- + * ^rp ^wp ^wp ^rp + */ + + if (end >= start) + avail = end - start; + else + avail = port->in_buffer_size - (start - end); + return avail; +} + +static inline int sync_data_avail_to_end(struct sync_port *port) +{ + int avail; + unsigned char *start; + unsigned char *end; + + start = (unsigned char*)port->readp; /* cast away volatile */ + end = (unsigned char*)port->writep; /* cast away volatile */ + /* 0123456789 0123456789 + * ----- ----- + * ^rp ^wp ^wp ^rp + */ + + if (end >= start) + avail = end - start; + else + avail = port->flip + port->in_buffer_size - start; + return avail; +} + +static int sync_serial_open(struct inode *inode, struct file *file) +{ + int dev = MINOR(inode->i_rdev); + sync_port* port; + reg_dma_rw_cfg cfg = {.en = regk_dma_yes}; + reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes}; + + DEBUG(printk("Open sync serial port %d\n", dev)); + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) + { + DEBUG(printk("Invalid minor %d\n", dev)); + return -ENODEV; + } + port = &ports[dev]; + /* Allow open this device twice (assuming one reader and one writer) */ + if (port->busy == 2) + { + DEBUG(printk("Device is busy.. \n")); + return -EBUSY; + } + if (port->init_irqs) { + if (port->use_dma) { + if (port == &ports[0]){ +#ifdef SYNC_SER_DMA + if(request_irq(DMA4_INTR_VECT, + tr_interrupt, + 0, + "synchronous serial 0 dma tr", + &ports[0])) { + printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ"); + return -EBUSY; + } else if(request_irq(DMA5_INTR_VECT, + rx_interrupt, + 0, + "synchronous serial 1 dma rx", + &ports[0])) { + free_irq(DMA4_INTR_VECT, &port[0]); + printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ"); + return -EBUSY; + } else if (crisv32_request_dma(SYNC_SER0_TX_DMA_NBR, + "synchronous serial 0 dma tr", + DMA_VERBOSE_ON_ERROR, + 0, + dma_sser0)) { + free_irq(DMA4_INTR_VECT, &port[0]); + free_irq(DMA5_INTR_VECT, &port[0]); + printk(KERN_CRIT "Can't allocate sync serial port 0 TX DMA channel"); + return -EBUSY; + } else if (crisv32_request_dma(SYNC_SER0_RX_DMA_NBR, + "synchronous serial 0 dma rec", + DMA_VERBOSE_ON_ERROR, + 0, + dma_sser0)) { + crisv32_free_dma(SYNC_SER0_TX_DMA_NBR); + free_irq(DMA4_INTR_VECT, &port[0]); + free_irq(DMA5_INTR_VECT, &port[0]); + printk(KERN_CRIT "Can't allocate sync serial port 1 RX DMA channel"); + return -EBUSY; + } +#endif + } + else if (port == &ports[1]){ +#ifdef SYNC_SER_DMA + if (request_irq(DMA6_INTR_VECT, + tr_interrupt, + 0, + "synchronous serial 1 dma tr", + &ports[1])) { + printk(KERN_CRIT "Can't allocate sync serial port 1 IRQ"); + return -EBUSY; + } else if (request_irq(DMA7_INTR_VECT, + rx_interrupt, + 0, + "synchronous serial 1 dma rx", + &ports[1])) { + free_irq(DMA6_INTR_VECT, &ports[1]); + printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ"); + return -EBUSY; + } else if (crisv32_request_dma(SYNC_SER1_TX_DMA_NBR, + "synchronous serial 1 dma tr", + DMA_VERBOSE_ON_ERROR, + 0, + dma_sser1)) { + free_irq(21, &ports[1]); + free_irq(20, &ports[1]); + printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel"); + return -EBUSY; + } else if (crisv32_request_dma(SYNC_SER1_RX_DMA_NBR, + "synchronous serial 3 dma rec", + DMA_VERBOSE_ON_ERROR, + 0, + dma_sser1)) { + crisv32_free_dma(SYNC_SER1_TX_DMA_NBR); + free_irq(DMA6_INTR_VECT, &ports[1]); + free_irq(DMA7_INTR_VECT, &ports[1]); + printk(KERN_CRIT "Can't allocate sync serial port 3 RX DMA channel"); + return -EBUSY; + } +#endif + } + + /* Enable DMAs */ + REG_WR(dma, port->regi_dmain, rw_cfg, cfg); + REG_WR(dma, port->regi_dmaout, rw_cfg, cfg); + /* Enable DMA IRQs */ + REG_WR(dma, port->regi_dmain, rw_intr_mask, intr_mask); + REG_WR(dma, port->regi_dmaout, rw_intr_mask, intr_mask); + /* Set up wordsize = 2 for DMAs. */ + DMA_WR_CMD (port->regi_dmain, regk_dma_set_w_size1); + DMA_WR_CMD (port->regi_dmaout, regk_dma_set_w_size1); + + start_dma_in(port); + port->init_irqs = 0; + } else { /* !port->use_dma */ +#ifdef SYNC_SER_MANUAL + if (port == &ports[0]) { + if (request_irq(SSER0_INTR_VECT, + manual_interrupt, + 0, + "synchronous serial manual irq", + &ports[0])) { + printk("Can't allocate sync serial manual irq"); + return -EBUSY; + } + } else if (port == &ports[1]) { + if (request_irq(SSER1_INTR_VECT, + manual_interrupt, + 0, + "synchronous serial manual irq", + &ports[1])) { + printk(KERN_CRIT "Can't allocate sync serial manual irq"); + return -EBUSY; + } + } + port->init_irqs = 0; +#else + panic("sync_serial: Manual mode not supported.\n"); +#endif /* SYNC_SER_MANUAL */ + } + } /* port->init_irqs */ + + port->busy++; + return 0; +} + +static int sync_serial_release(struct inode *inode, struct file *file) +{ + int dev = MINOR(inode->i_rdev); + sync_port* port; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) + { + DEBUG(printk("Invalid minor %d\n", dev)); + return -ENODEV; + } + port = &ports[dev]; + if (port->busy) + port->busy--; + if (!port->busy) + /* XXX */ ; + return 0; +} + +static unsigned int sync_serial_poll(struct file *file, poll_table *wait) +{ + int dev = MINOR(file->f_dentry->d_inode->i_rdev); + unsigned int mask = 0; + sync_port* port; + DEBUGPOLL( static unsigned int prev_mask = 0; ); + + port = &ports[dev]; + poll_wait(file, &port->out_wait_q, wait); + poll_wait(file, &port->in_wait_q, wait); + /* Some room to write */ + if (port->out_count < OUT_BUFFER_SIZE) + mask |= POLLOUT | POLLWRNORM; + /* At least an inbufchunk of data */ + if (sync_data_avail(port) >= port->inbufchunk) + mask |= POLLIN | POLLRDNORM; + + DEBUGPOLL(if (mask != prev_mask) + printk("sync_serial_poll: mask 0x%08X %s %s\n", mask, + mask&POLLOUT?"POLLOUT":"", mask&POLLIN?"POLLIN":""); + prev_mask = mask; + ); + return mask; +} + +static int sync_serial_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int return_val = 0; + int dev = MINOR(file->f_dentry->d_inode->i_rdev); + sync_port* port; + reg_sser_rw_tr_cfg tr_cfg; + reg_sser_rw_rec_cfg rec_cfg; + reg_sser_rw_frm_cfg frm_cfg; + reg_sser_rw_cfg gen_cfg; + reg_sser_rw_intr_mask intr_mask; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) + { + DEBUG(printk("Invalid minor %d\n", dev)); + return -1; + } + port = &ports[dev]; + spin_lock_irq(&port->lock); + + tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); + rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); + frm_cfg = REG_RD(sser, port->regi_sser, rw_frm_cfg); + gen_cfg = REG_RD(sser, port->regi_sser, rw_cfg); + intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask); + + switch(cmd) + { + case SSP_SPEED: + if (GET_SPEED(arg) == CODEC) + { + gen_cfg.base_freq = regk_sser_f32; + /* FREQ = 0 => 4 MHz => clk_div = 7*/ + gen_cfg.clk_div = 6 + (1 << GET_FREQ(arg)); + } + else + { + gen_cfg.base_freq = regk_sser_f29_493; + switch (GET_SPEED(arg)) + { + case SSP150: + gen_cfg.clk_div = 29493000 / (150 * 8) - 1; + break; + case SSP300: + gen_cfg.clk_div = 29493000 / (300 * 8) - 1; + break; + case SSP600: + gen_cfg.clk_div = 29493000 / (600 * 8) - 1; + break; + case SSP1200: + gen_cfg.clk_div = 29493000 / (1200 * 8) - 1; + break; + case SSP2400: + gen_cfg.clk_div = 29493000 / (2400 * 8) - 1; + break; + case SSP4800: + gen_cfg.clk_div = 29493000 / (4800 * 8) - 1; + break; + case SSP9600: + gen_cfg.clk_div = 29493000 / (9600 * 8) - 1; + break; + case SSP19200: + gen_cfg.clk_div = 29493000 / (19200 * 8) - 1; + break; + case SSP28800: + gen_cfg.clk_div = 29493000 / (28800 * 8) - 1; + break; + case SSP57600: + gen_cfg.clk_div = 29493000 / (57600 * 8) - 1; + break; + case SSP115200: + gen_cfg.clk_div = 29493000 / (115200 * 8) - 1; + break; + case SSP230400: + gen_cfg.clk_div = 29493000 / (230400 * 8) - 1; + break; + case SSP460800: + gen_cfg.clk_div = 29493000 / (460800 * 8) - 1; + break; + case SSP921600: + gen_cfg.clk_div = 29493000 / (921600 * 8) - 1; + break; + case SSP3125000: + gen_cfg.base_freq = regk_sser_f100; + gen_cfg.clk_div = 100000000 / (3125000 * 8) - 1; + break; + + } + } + frm_cfg.wordrate = GET_WORD_RATE(arg); + + break; + case SSP_MODE: + switch(arg) + { + case MASTER_OUTPUT: + port->output = 1; + port->input = 0; + gen_cfg.clk_dir = regk_sser_out; + break; + case SLAVE_OUTPUT: + port->output = 1; + port->input = 0; + gen_cfg.clk_dir = regk_sser_in; + break; + case MASTER_INPUT: + port->output = 0; + port->input = 1; + gen_cfg.clk_dir = regk_sser_out; + break; + case SLAVE_INPUT: + port->output = 0; + port->input = 1; + gen_cfg.clk_dir = regk_sser_in; + break; + case MASTER_BIDIR: + port->output = 1; + port->input = 1; + gen_cfg.clk_dir = regk_sser_out; + break; + case SLAVE_BIDIR: + port->output = 1; + port->input = 1; + gen_cfg.clk_dir = regk_sser_in; + break; + default: + spin_unlock_irq(&port->lock); + return -EINVAL; + + } + if (!port->use_dma || (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT)) + intr_mask.rdav = regk_sser_yes; + break; + case SSP_FRAME_SYNC: + if (arg & NORMAL_SYNC) + frm_cfg.tr_delay = 1; + else if (arg & EARLY_SYNC) + frm_cfg.tr_delay = 0; + + tr_cfg.bulk_wspace = frm_cfg.tr_delay; + frm_cfg.early_wend = regk_sser_yes; + if (arg & BIT_SYNC) + frm_cfg.type = regk_sser_edge; + else if (arg & WORD_SYNC) + frm_cfg.type = regk_sser_level; + else if (arg & EXTENDED_SYNC) + frm_cfg.early_wend = regk_sser_no; + + if (arg & SYNC_ON) + frm_cfg.frame_pin_use = regk_sser_frm; + else if (arg & SYNC_OFF) + frm_cfg.frame_pin_use = regk_sser_gio0; + + if (arg & WORD_SIZE_8) + rec_cfg.sample_size = tr_cfg.sample_size = 7; + else if (arg & WORD_SIZE_12) + rec_cfg.sample_size = tr_cfg.sample_size = 11; + else if (arg & WORD_SIZE_16) + rec_cfg.sample_size = tr_cfg.sample_size = 15; + else if (arg & WORD_SIZE_24) + rec_cfg.sample_size = tr_cfg.sample_size = 23; + else if (arg & WORD_SIZE_32) + rec_cfg.sample_size = tr_cfg.sample_size = 31; + + if (arg & BIT_ORDER_MSB) + rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_msbfirst; + else if (arg & BIT_ORDER_LSB) + rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_lsbfirst; + + if (arg & FLOW_CONTROL_ENABLE) + rec_cfg.fifo_thr = regk_sser_thr16; + else if (arg & FLOW_CONTROL_DISABLE) + rec_cfg.fifo_thr = regk_sser_inf; + + if (arg & CLOCK_NOT_GATED) + gen_cfg.gate_clk = regk_sser_no; + else if (arg & CLOCK_GATED) + gen_cfg.gate_clk = regk_sser_yes; + + break; + case SSP_IPOLARITY: + /* NOTE!! negedge is considered NORMAL */ + if (arg & CLOCK_NORMAL) + rec_cfg.clk_pol = regk_sser_neg; + else if (arg & CLOCK_INVERT) + rec_cfg.clk_pol = regk_sser_pos; + + if (arg & FRAME_NORMAL) + frm_cfg.level = regk_sser_pos_hi; + else if (arg & FRAME_INVERT) + frm_cfg.level = regk_sser_neg_lo; + + if (arg & STATUS_NORMAL) + gen_cfg.hold_pol = regk_sser_pos; + else if (arg & STATUS_INVERT) + gen_cfg.hold_pol = regk_sser_neg; + break; + case SSP_OPOLARITY: + if (arg & CLOCK_NORMAL) + gen_cfg.out_clk_pol = regk_sser_neg; + else if (arg & CLOCK_INVERT) + gen_cfg.out_clk_pol = regk_sser_pos; + + if (arg & FRAME_NORMAL) + frm_cfg.level = regk_sser_pos_hi; + else if (arg & FRAME_INVERT) + frm_cfg.level = regk_sser_neg_lo; + + if (arg & STATUS_NORMAL) + gen_cfg.hold_pol = regk_sser_pos; + else if (arg & STATUS_INVERT) + gen_cfg.hold_pol = regk_sser_neg; + break; + case SSP_SPI: + rec_cfg.fifo_thr = regk_sser_inf; + rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_msbfirst; + rec_cfg.sample_size = tr_cfg.sample_size = 7; + frm_cfg.frame_pin_use = regk_sser_frm; + frm_cfg.type = regk_sser_level; + frm_cfg.tr_delay = 1; + frm_cfg.level = regk_sser_neg_lo; + if (arg & SPI_SLAVE) + { + rec_cfg.clk_pol = regk_sser_neg; + gen_cfg.clk_dir = regk_sser_in; + port->input = 1; + port->output = 0; + } + else + { + gen_cfg.out_clk_pol = regk_sser_pos; + port->input = 0; + port->output = 1; + gen_cfg.clk_dir = regk_sser_out; + } + break; + case SSP_INBUFCHUNK: + break; + default: + return_val = -1; + } + + + if (port->started) + { + tr_cfg.tr_en = port->output; + rec_cfg.rec_en = port->input; + } + + REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); + REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); + REG_WR(sser, port->regi_sser, rw_frm_cfg, frm_cfg); + REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); + REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); + + spin_unlock_irq(&port->lock); + return return_val; +} + +static ssize_t sync_serial_write(struct file * file, const char * buf, + size_t count, loff_t *ppos) +{ + int dev = MINOR(file->f_dentry->d_inode->i_rdev); + DECLARE_WAITQUEUE(wait, current); + sync_port *port; + unsigned long c, c1; + unsigned long free_outp; + unsigned long outp; + unsigned long out_buffer; + unsigned long flags; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) + { + DEBUG(printk("Invalid minor %d\n", dev)); + return -ENODEV; + } + port = &ports[dev]; + + DEBUGWRITE(printk("W d%d c %lu (%d/%d)\n", port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE)); + /* Space to end of buffer */ + /* + * out_buffer <c1>012345<- c ->OUT_BUFFER_SIZE + * outp^ +out_count + ^free_outp + * out_buffer 45<- c ->0123OUT_BUFFER_SIZE + * +out_count outp^ + * free_outp + * + */ + + /* Read variables that may be updated by interrupts */ + spin_lock_irqsave(&port->lock, flags); + count = count > OUT_BUFFER_SIZE - port->out_count ? OUT_BUFFER_SIZE - port->out_count : count; + outp = (unsigned long)port->outp; + free_outp = outp + port->out_count; + spin_unlock_irqrestore(&port->lock, flags); + out_buffer = (unsigned long)port->out_buffer; + + /* Find out where and how much to write */ + if (free_outp >= out_buffer + OUT_BUFFER_SIZE) + free_outp -= OUT_BUFFER_SIZE; + if (free_outp >= outp) + c = out_buffer + OUT_BUFFER_SIZE - free_outp; + else + c = outp - free_outp; + if (c > count) + c = count; + +// DEBUGWRITE(printk("w op %08lX fop %08lX c %lu\n", outp, free_outp, c)); + if (copy_from_user((void*)free_outp, buf, c)) + return -EFAULT; + + if (c != count) { + buf += c; + c1 = count - c; + DEBUGWRITE(printk("w2 fi %lu c %lu c1 %lu\n", free_outp-out_buffer, c, c1)); + if (copy_from_user((void*)out_buffer, buf, c1)) + return -EFAULT; + } + spin_lock_irqsave(&port->lock, flags); + port->out_count += count; + spin_unlock_irqrestore(&port->lock, flags); + + /* Make sure transmitter/receiver is running */ + if (!port->started) + { + reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg); + reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); + reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); + cfg.en = regk_sser_yes; + tr_cfg.tr_en = port->output; + rec_cfg.rec_en = port->input; + REG_WR(sser, port->regi_sser, rw_cfg, cfg); + REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); + REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); + port->started = 1; + } + + if (file->f_flags & O_NONBLOCK) { + spin_lock_irqsave(&port->lock, flags); + if (!port->tr_running) { + if (!port->use_dma) { + reg_sser_rw_intr_mask intr_mask; + intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask); + /* Start sender by writing data */ + send_word(port); + /* and enable transmitter ready IRQ */ + intr_mask.trdy = 1; + REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); + } else { + start_dma(port, (unsigned char* volatile )port->outp, c); + } + } + spin_unlock_irqrestore(&port->lock, flags); + DEBUGWRITE(printk("w d%d c %lu NB\n", + port->port_nbr, count)); + return count; + } + + /* Sleep until all sent */ + + add_wait_queue(&port->out_wait_q, &wait); + set_current_state(TASK_INTERRUPTIBLE); + spin_lock_irqsave(&port->lock, flags); + if (!port->tr_running) { + if (!port->use_dma) { + reg_sser_rw_intr_mask intr_mask; + intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask); + /* Start sender by writing data */ + send_word(port); + /* and enable transmitter ready IRQ */ + intr_mask.trdy = 1; + REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); + } else { + start_dma(port, port->outp, c); + } + } + spin_unlock_irqrestore(&port->lock, flags); + schedule(); + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->out_wait_q, &wait); + if (signal_pending(current)) + { + return -EINTR; + } + DEBUGWRITE(printk("w d%d c %lu\n", port->port_nbr, count)); + return count; +} + +static ssize_t sync_serial_read(struct file * file, char * buf, + size_t count, loff_t *ppos) +{ + int dev = MINOR(file->f_dentry->d_inode->i_rdev); + int avail; + sync_port *port; + unsigned char* start; + unsigned char* end; + unsigned long flags; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) + { + DEBUG(printk("Invalid minor %d\n", dev)); + return -ENODEV; + } + port = &ports[dev]; + + DEBUGREAD(printk("R%d c %d ri %lu wi %lu /%lu\n", dev, count, port->readp - port->flip, port->writep - port->flip, port->in_buffer_size)); + + if (!port->started) + { + reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg); + reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); + reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); + cfg.en = regk_sser_yes; + tr_cfg.tr_en = regk_sser_yes; + rec_cfg.rec_en = regk_sser_yes; + REG_WR(sser, port->regi_sser, rw_cfg, cfg); + REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); + REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); + port->started = 1; + } + + + /* Calculate number of available bytes */ + /* Save pointers to avoid that they are modified by interrupt */ + spin_lock_irqsave(&port->lock, flags); + start = (unsigned char*)port->readp; /* cast away volatile */ + end = (unsigned char*)port->writep; /* cast away volatile */ + spin_unlock_irqrestore(&port->lock, flags); + while ((start == end) && !port->full) /* No data */ + { + if (file->f_flags & O_NONBLOCK) + { + return -EAGAIN; + } + + interruptible_sleep_on(&port->in_wait_q); + if (signal_pending(current)) + { + return -EINTR; + } + spin_lock_irqsave(&port->lock, flags); + start = (unsigned char*)port->readp; /* cast away volatile */ + end = (unsigned char*)port->writep; /* cast away volatile */ + spin_unlock_irqrestore(&port->lock, flags); + } + + /* Lazy read, never return wrapped data. */ + if (port->full) + avail = port->in_buffer_size; + else if (end > start) + avail = end - start; + else + avail = port->flip + port->in_buffer_size - start; + + count = count > avail ? avail : count; + if (copy_to_user(buf, start, count)) + return -EFAULT; + /* Disable interrupts while updating readp */ + spin_lock_irqsave(&port->lock, flags); + port->readp += count; + if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */ + port->readp = port->flip; + port->full = 0; + spin_unlock_irqrestore(&port->lock, flags); + DEBUGREAD(printk("r %d\n", count)); + return count; +} + +static void send_word(sync_port* port) +{ + reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); + reg_sser_rw_tr_data tr_data = {0}; + + switch(tr_cfg.sample_size) + { + case 8: + port->out_count--; + tr_data.data = *port->outp++; + REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + case 12: + { + int data = (*port->outp++) << 8; + data |= *port->outp++; + port->out_count-=2; + tr_data.data = data; + REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + } + break; + case 16: + port->out_count-=2; + tr_data.data = *(unsigned short *)port->outp; + REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); + port->outp+=2; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + case 24: + port->out_count-=3; + tr_data.data = *(unsigned short *)port->outp; + REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); + port->outp+=2; + tr_data.data = *port->outp++; + REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + case 32: + port->out_count-=4; + tr_data.data = *(unsigned short *)port->outp; + REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); + port->outp+=2; + tr_data.data = *(unsigned short *)port->outp; + REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); + port->outp+=2; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + } +} + + +static void start_dma(struct sync_port* port, const char* data, int count) +{ + port->tr_running = 1; + port->out_descr.buf = (char*)virt_to_phys((char*)data); + port->out_descr.after = port->out_descr.buf + count; + port->out_descr.eol = port->out_descr.intr = 1; + + port->out_context.saved_data = (dma_descr_data*)virt_to_phys(&port->out_descr); + port->out_context.saved_data_buf = port->out_descr.buf; + + DMA_START_CONTEXT(port->regi_dmaout, virt_to_phys((char*)&port->out_context)); + DEBUGTXINT(printk("dma %08lX c %d\n", (unsigned long)data, count)); +} + +static void start_dma_in(sync_port* port) +{ + int i; + char* buf; + port->writep = port->flip; + + if (port->writep > port->flip + port->in_buffer_size) + { + panic("Offset too large in sync serial driver\n"); + return; + } + buf = (char*)virt_to_phys(port->in_buffer); + for (i = 0; i < NUM_IN_DESCR; i++) { + port->in_descr[i].buf = buf; + port->in_descr[i].after = buf + port->inbufchunk; + port->in_descr[i].intr = 1; + port->in_descr[i].next = (dma_descr_data*)virt_to_phys(&port->in_descr[i+1]); + port->in_descr[i].buf = buf; + buf += port->inbufchunk; + } + /* Link the last descriptor to the first */ + port->in_descr[i-1].next = (dma_descr_data*)virt_to_phys(&port->in_descr[0]); + port->in_descr[i-1].eol = regk_sser_yes; + port->next_rx_desc = &port->in_descr[0]; + port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR - 1]; + port->in_context.saved_data = (dma_descr_data*)virt_to_phys(&port->in_descr[0]); + port->in_context.saved_data_buf = port->in_descr[0].buf; + DMA_START_CONTEXT(port->regi_dmain, virt_to_phys(&port->in_context)); +} + +#ifdef SYNC_SER_DMA +static irqreturn_t tr_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + reg_dma_r_masked_intr masked; + reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes}; + int i; + struct dma_descr_data *descr; + unsigned int sentl; + int found = 0; + + for (i = 0; i < NUMBER_OF_PORTS; i++) + { + sync_port *port = &ports[i]; + if (!port->enabled || !port->use_dma ) + continue; + + masked = REG_RD(dma, port->regi_dmaout, r_masked_intr); + + if (masked.data) /* IRQ active for the port? */ + { + found = 1; + /* Clear IRQ */ + REG_WR(dma, port->regi_dmaout, rw_ack_intr, ack_intr); + descr = &port->out_descr; + sentl = descr->after - descr->buf; + port->out_count -= sentl; + port->outp += sentl; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + if (port->out_count) { + int c; + c = port->out_buffer + OUT_BUFFER_SIZE - port->outp; + if (c > port->out_count) + c = port->out_count; + DEBUGTXINT(printk("tx_int DMAWRITE %i %i\n", sentl, c)); + start_dma(port, port->outp, c); + } else { + DEBUGTXINT(printk("tx_int DMA stop %i\n", sentl)); + port->tr_running = 0; + } + wake_up_interruptible(&port->out_wait_q); /* wake up the waiting process */ + } + } + return IRQ_RETVAL(found); +} /* tr_interrupt */ + +static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + reg_dma_r_masked_intr masked; + reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes}; + + int i; + int found = 0; + + for (i = 0; i < NUMBER_OF_PORTS; i++) + { + sync_port *port = &ports[i]; + + if (!port->enabled || !port->use_dma ) + continue; + + masked = REG_RD(dma, port->regi_dmain, r_masked_intr); + + if (masked.data) /* Descriptor interrupt */ + { + found = 1; + while (REG_RD(dma, port->regi_dmain, rw_data) != + virt_to_phys(port->next_rx_desc)) { + + if (port->writep + port->inbufchunk > port->flip + port->in_buffer_size) { + int first_size = port->flip + port->in_buffer_size - port->writep; + memcpy((char*)port->writep, phys_to_virt((unsigned)port->next_rx_desc->buf), first_size); + memcpy(port->flip, phys_to_virt((unsigned)port->next_rx_desc->buf+first_size), port->inbufchunk - first_size); + port->writep = port->flip + port->inbufchunk - first_size; + } else { + memcpy((char*)port->writep, + phys_to_virt((unsigned)port->next_rx_desc->buf), + port->inbufchunk); + port->writep += port->inbufchunk; + if (port->writep >= port->flip + port->in_buffer_size) + port->writep = port->flip; + } + if (port->writep == port->readp) + { + port->full = 1; + } + + port->next_rx_desc->eol = 0; + port->prev_rx_desc->eol = 1; + port->prev_rx_desc = phys_to_virt((unsigned)port->next_rx_desc); + port->next_rx_desc = phys_to_virt((unsigned)port->next_rx_desc->next); + wake_up_interruptible(&port->in_wait_q); /* wake up the waiting process */ + DMA_CONTINUE(port->regi_dmain); + REG_WR(dma, port->regi_dmain, rw_ack_intr, ack_intr); + + } + } + } + return IRQ_RETVAL(found); +} /* rx_interrupt */ +#endif /* SYNC_SER_DMA */ + +#ifdef SYNC_SER_MANUAL +static irqreturn_t manual_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + int i; + int found = 0; + reg_sser_r_masked_intr masked; + + for (i = 0; i < NUMBER_OF_PORTS; i++) + { + sync_port* port = &ports[i]; + + if (!port->enabled || port->use_dma) + { + continue; + } + + masked = REG_RD(sser, port->regi_sser, r_masked_intr); + if (masked.rdav) /* Data received? */ + { + reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); + reg_sser_r_rec_data data = REG_RD(sser, port->regi_sser, r_rec_data); + found = 1; + /* Read data */ + switch(rec_cfg.sample_size) + { + case 8: + *port->writep++ = data.data & 0xff; + break; + case 12: + *port->writep = (data.data & 0x0ff0) >> 4; + *(port->writep + 1) = data.data & 0x0f; + port->writep+=2; + break; + case 16: + *(unsigned short*)port->writep = data.data; + port->writep+=2; + break; + case 24: + *(unsigned int*)port->writep = data.data; + port->writep+=3; + break; + case 32: + *(unsigned int*)port->writep = data.data; + port->writep+=4; + break; + } + + if (port->writep >= port->flip + port->in_buffer_size) /* Wrap? */ + port->writep = port->flip; + if (port->writep == port->readp) { + /* receive buffer overrun, discard oldest data + */ + port->readp++; + if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */ + port->readp = port->flip; + } + if (sync_data_avail(port) >= port->inbufchunk) + wake_up_interruptible(&port->in_wait_q); /* Wake up application */ + } + + if (masked.trdy) /* Transmitter ready? */ + { + found = 1; + if (port->out_count > 0) /* More data to send */ + send_word(port); + else /* transmission finished */ + { + reg_sser_rw_intr_mask intr_mask; + intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask); + intr_mask.trdy = 0; + REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); + wake_up_interruptible(&port->out_wait_q); /* Wake up application */ + } + } + } + return IRQ_RETVAL(found); +} +#endif + +module_init(etrax_sync_serial_init); diff --git a/arch/cris/arch-v32/kernel/Makefile b/arch/cris/arch-v32/kernel/Makefile new file mode 100644 index 000000000000..5d5b613cde8c --- /dev/null +++ b/arch/cris/arch-v32/kernel/Makefile @@ -0,0 +1,21 @@ +# $Id: Makefile,v 1.11 2004/12/17 10:16:13 starvik Exp $ +# +# Makefile for the linux kernel. +# + +extra-y := head.o + + +obj-y := entry.o traps.o irq.o debugport.o dma.o pinmux.o \ + process.o ptrace.o setup.o signal.o traps.o time.o \ + arbiter.o io.o + +obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o + +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o +obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o +obj-$(CONFIG_MODULES) += crisksyms.o + +clean: + diff --git a/arch/cris/arch-v32/kernel/arbiter.c b/arch/cris/arch-v32/kernel/arbiter.c new file mode 100644 index 000000000000..3870d2fd5160 --- /dev/null +++ b/arch/cris/arch-v32/kernel/arbiter.c @@ -0,0 +1,297 @@ +/* + * Memory arbiter functions. Allocates bandwith through the + * arbiter and sets up arbiter breakpoints. + * + * The algorithm first assigns slots to the clients that has specified + * bandwith (e.g. ethernet) and then the remaining slots are divided + * on all the active clients. + * + * Copyright (c) 2004, 2005 Axis Communications AB. + */ + +#include <linux/config.h> +#include <asm/arch/hwregs/reg_map.h> +#include <asm/arch/hwregs/reg_rdwr.h> +#include <asm/arch/hwregs/marb_defs.h> +#include <asm/arch/arbiter.h> +#include <asm/arch/hwregs/intr_vect.h> +#include <linux/interrupt.h> +#include <linux/signal.h> +#include <linux/errno.h> +#include <linux/spinlock.h> +#include <asm/io.h> + +struct crisv32_watch_entry +{ + unsigned long instance; + watch_callback* cb; + unsigned long start; + unsigned long end; + int used; +}; + +#define NUMBER_OF_BP 4 +#define NBR_OF_CLIENTS 14 +#define NBR_OF_SLOTS 64 +#define SDRAM_BANDWIDTH 100000000 /* Some kind of expected value */ +#define INTMEM_BANDWIDTH 400000000 +#define NBR_OF_REGIONS 2 + +static struct crisv32_watch_entry watches[NUMBER_OF_BP] = +{ + {regi_marb_bp0}, + {regi_marb_bp1}, + {regi_marb_bp2}, + {regi_marb_bp3} +}; + +static int requested_slots[NBR_OF_REGIONS][NBR_OF_CLIENTS]; +static int active_clients[NBR_OF_REGIONS][NBR_OF_CLIENTS]; +static int max_bandwidth[NBR_OF_REGIONS] = {SDRAM_BANDWIDTH, INTMEM_BANDWIDTH}; + +DEFINE_SPINLOCK(arbiter_lock); + +static irqreturn_t +crisv32_arbiter_irq(int irq, void* dev_id, struct pt_regs* regs); + +static void crisv32_arbiter_config(int region) +{ + int slot; + int client; + int interval = 0; + int val[NBR_OF_SLOTS]; + + for (slot = 0; slot < NBR_OF_SLOTS; slot++) + val[slot] = NBR_OF_CLIENTS + 1; + + for (client = 0; client < NBR_OF_CLIENTS; client++) + { + int pos; + if (!requested_slots[region][client]) + continue; + interval = NBR_OF_SLOTS / requested_slots[region][client]; + pos = 0; + while (pos < NBR_OF_SLOTS) + { + if (val[pos] != NBR_OF_CLIENTS + 1) + pos++; + else + { + val[pos] = client; + pos += interval; + } + } + } + + client = 0; + for (slot = 0; slot < NBR_OF_SLOTS; slot++) + { + if (val[slot] == NBR_OF_CLIENTS + 1) + { + int first = client; + while(!active_clients[region][client]) { + client = (client + 1) % NBR_OF_CLIENTS; + if (client == first) + break; + } + val[slot] = client; + client = (client + 1) % NBR_OF_CLIENTS; + } + if (region == EXT_REGION) + REG_WR_INT_VECT(marb, regi_marb, rw_ext_slots, slot, val[slot]); + else if (region == INT_REGION) + REG_WR_INT_VECT(marb, regi_marb, rw_int_slots, slot, val[slot]); + } +} + +extern char _stext, _etext; + +static void crisv32_arbiter_init(void) +{ + static int initialized = 0; + + if (initialized) + return; + + initialized = 1; + + /* CPU caches are active. */ + active_clients[EXT_REGION][10] = active_clients[EXT_REGION][11] = 1; + crisv32_arbiter_config(EXT_REGION); + crisv32_arbiter_config(INT_REGION); + + if (request_irq(MEMARB_INTR_VECT, crisv32_arbiter_irq, SA_INTERRUPT, + "arbiter", NULL)) + printk(KERN_ERR "Couldn't allocate arbiter IRQ\n"); + +#ifndef CONFIG_ETRAX_KGDB + /* Global watch for writes to kernel text segment. */ + crisv32_arbiter_watch(virt_to_phys(&_stext), &_etext - &_stext, + arbiter_all_clients, arbiter_all_write, NULL); +#endif +} + + + +int crisv32_arbiter_allocate_bandwith(int client, int region, + unsigned long bandwidth) +{ + int i; + int total_assigned = 0; + int total_clients = 0; + int req; + + crisv32_arbiter_init(); + + for (i = 0; i < NBR_OF_CLIENTS; i++) + { + total_assigned += requested_slots[region][i]; + total_clients += active_clients[region][i]; + } + req = NBR_OF_SLOTS / (max_bandwidth[region] / bandwidth); + + if (total_assigned + total_clients + req + 1 > NBR_OF_SLOTS) + return -ENOMEM; + + active_clients[region][client] = 1; + requested_slots[region][client] = req; + crisv32_arbiter_config(region); + + return 0; +} + +int crisv32_arbiter_watch(unsigned long start, unsigned long size, + unsigned long clients, unsigned long accesses, + watch_callback* cb) +{ + int i; + + crisv32_arbiter_init(); + + if (start > 0x80000000) { + printk("Arbiter: %lX doesn't look like a physical address", start); + return -EFAULT; + } + + spin_lock(&arbiter_lock); + + for (i = 0; i < NUMBER_OF_BP; i++) { + if (!watches[i].used) { + reg_marb_rw_intr_mask intr_mask = REG_RD(marb, regi_marb, rw_intr_mask); + + watches[i].used = 1; + watches[i].start = start; + watches[i].end = start + size; + watches[i].cb = cb; + + REG_WR_INT(marb_bp, watches[i].instance, rw_first_addr, watches[i].start); + REG_WR_INT(marb_bp, watches[i].instance, rw_last_addr, watches[i].end); + REG_WR_INT(marb_bp, watches[i].instance, rw_op, accesses); + REG_WR_INT(marb_bp, watches[i].instance, rw_clients, clients); + + if (i == 0) + intr_mask.bp0 = regk_marb_yes; + else if (i == 1) + intr_mask.bp1 = regk_marb_yes; + else if (i == 2) + intr_mask.bp2 = regk_marb_yes; + else if (i == 3) + intr_mask.bp3 = regk_marb_yes; + + REG_WR(marb, regi_marb, rw_intr_mask, intr_mask); + spin_unlock(&arbiter_lock); + + return i; + } + } + spin_unlock(&arbiter_lock); + return -ENOMEM; +} + +int crisv32_arbiter_unwatch(int id) +{ + reg_marb_rw_intr_mask intr_mask = REG_RD(marb, regi_marb, rw_intr_mask); + + crisv32_arbiter_init(); + + spin_lock(&arbiter_lock); + + if ((id < 0) || (id >= NUMBER_OF_BP) || (!watches[id].used)) { + spin_unlock(&arbiter_lock); + return -EINVAL; + } + + memset(&watches[id], 0, sizeof(struct crisv32_watch_entry)); + + if (id == 0) + intr_mask.bp0 = regk_marb_no; + else if (id == 1) + intr_mask.bp2 = regk_marb_no; + else if (id == 2) + intr_mask.bp2 = regk_marb_no; + else if (id == 3) + intr_mask.bp3 = regk_marb_no; + + REG_WR(marb, regi_marb, rw_intr_mask, intr_mask); + + spin_unlock(&arbiter_lock); + return 0; +} + +extern void show_registers(struct pt_regs *regs); + +static irqreturn_t +crisv32_arbiter_irq(int irq, void* dev_id, struct pt_regs* regs) +{ + reg_marb_r_masked_intr masked_intr = REG_RD(marb, regi_marb, r_masked_intr); + reg_marb_bp_r_brk_clients r_clients; + reg_marb_bp_r_brk_addr r_addr; + reg_marb_bp_r_brk_op r_op; + reg_marb_bp_r_brk_first_client r_first; + reg_marb_bp_r_brk_size r_size; + reg_marb_bp_rw_ack ack = {0}; + reg_marb_rw_ack_intr ack_intr = {.bp0=1,.bp1=1,.bp2=1,.bp3=1}; + struct crisv32_watch_entry* watch; + + if (masked_intr.bp0) { + watch = &watches[0]; + ack_intr.bp0 = regk_marb_yes; + } else if (masked_intr.bp1) { + watch = &watches[1]; + ack_intr.bp1 = regk_marb_yes; + } else if (masked_intr.bp2) { + watch = &watches[2]; + ack_intr.bp2 = regk_marb_yes; + } else if (masked_intr.bp3) { + watch = &watches[3]; + ack_intr.bp3 = regk_marb_yes; + } else { + return IRQ_NONE; + } + + /* Retrieve all useful information and print it. */ + r_clients = REG_RD(marb_bp, watch->instance, r_brk_clients); + r_addr = REG_RD(marb_bp, watch->instance, r_brk_addr); + r_op = REG_RD(marb_bp, watch->instance, r_brk_op); + r_first = REG_RD(marb_bp, watch->instance, r_brk_first_client); + r_size = REG_RD(marb_bp, watch->instance, r_brk_size); + + printk("Arbiter IRQ\n"); + printk("Clients %X addr %X op %X first %X size %X\n", + REG_TYPE_CONV(int, reg_marb_bp_r_brk_clients, r_clients), + REG_TYPE_CONV(int, reg_marb_bp_r_brk_addr, r_addr), + REG_TYPE_CONV(int, reg_marb_bp_r_brk_op, r_op), + REG_TYPE_CONV(int, reg_marb_bp_r_brk_first_client, r_first), + REG_TYPE_CONV(int, reg_marb_bp_r_brk_size, r_size)); + + REG_WR(marb_bp, watch->instance, rw_ack, ack); + REG_WR(marb, regi_marb, rw_ack_intr, ack_intr); + + printk("IRQ occured at %lX\n", regs->erp); + + if (watch->cb) + watch->cb(); + + + return IRQ_HANDLED; +} diff --git a/arch/cris/arch-v32/kernel/asm-offsets.c b/arch/cris/arch-v32/kernel/asm-offsets.c new file mode 100644 index 000000000000..15b3d93a0496 --- /dev/null +++ b/arch/cris/arch-v32/kernel/asm-offsets.c @@ -0,0 +1,49 @@ +#include <linux/sched.h> +#include <asm/thread_info.h> + +/* + * Generate definitions needed by assembly language modules. + * This code generates raw asm output which is post-processed to extract + * and format the required data. + */ + +#define DEFINE(sym, val) \ + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + +#define BLANK() asm volatile("\n->" : : ) + +int main(void) +{ +#define ENTRY(entry) DEFINE(PT_ ## entry, offsetof(struct pt_regs, entry)) + ENTRY(orig_r10); + ENTRY(r13); + ENTRY(r12); + ENTRY(r11); + ENTRY(r10); + ENTRY(r9); + ENTRY(acr); + ENTRY(srs); + ENTRY(mof); + ENTRY(ccs); + ENTRY(srp); + BLANK(); +#undef ENTRY +#define ENTRY(entry) DEFINE(TI_ ## entry, offsetof(struct thread_info, entry)) + ENTRY(task); + ENTRY(flags); + ENTRY(preempt_count); + BLANK(); +#undef ENTRY +#define ENTRY(entry) DEFINE(THREAD_ ## entry, offsetof(struct thread_struct, entry)) + ENTRY(ksp); + ENTRY(usp); + ENTRY(ccs); + BLANK(); +#undef ENTRY +#define ENTRY(entry) DEFINE(TASK_ ## entry, offsetof(struct task_struct, entry)) + ENTRY(pid); + BLANK(); + DEFINE(LCLONE_VM, CLONE_VM); + DEFINE(LCLONE_UNTRACED, CLONE_UNTRACED); + return 0; +} diff --git a/arch/cris/arch-v32/kernel/crisksyms.c b/arch/cris/arch-v32/kernel/crisksyms.c new file mode 100644 index 000000000000..2c3bb9a0afe2 --- /dev/null +++ b/arch/cris/arch-v32/kernel/crisksyms.c @@ -0,0 +1,24 @@ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/irq.h> +#include <asm/arch/dma.h> +#include <asm/arch/intmem.h> +#include <asm/arch/pinmux.h> + +/* Functions for allocating DMA channels */ +EXPORT_SYMBOL(crisv32_request_dma); +EXPORT_SYMBOL(crisv32_free_dma); + +/* Functions for handling internal RAM */ +EXPORT_SYMBOL(crisv32_intmem_alloc); +EXPORT_SYMBOL(crisv32_intmem_free); +EXPORT_SYMBOL(crisv32_intmem_phys_to_virt); +EXPORT_SYMBOL(crisv32_intmem_virt_to_phys); + +/* Functions for handling pinmux */ +EXPORT_SYMBOL(crisv32_pinmux_alloc); +EXPORT_SYMBOL(crisv32_pinmux_dealloc); + +/* Functions masking/unmasking interrupts */ +EXPORT_SYMBOL(mask_irq); +EXPORT_SYMBOL(unmask_irq); diff --git a/arch/cris/arch-v32/kernel/debugport.c b/arch/cris/arch-v32/kernel/debugport.c new file mode 100644 index 000000000000..ffc1ebf2dfee --- /dev/null +++ b/arch/cris/arch-v32/kernel/debugport.c @@ -0,0 +1,461 @@ +/* + * Copyright (C) 2003, Axis Communications AB. + */ + +#include <linux/config.h> +#include <linux/console.h> +#include <linux/init.h> +#include <linux/major.h> +#include <linux/delay.h> +#include <linux/tty.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/arch/hwregs/ser_defs.h> +#include <asm/arch/hwregs/dma_defs.h> +#include <asm/arch/pinmux.h> + +#include <asm/irq.h> +#include <asm/arch/hwregs/intr_vect_defs.h> + +struct dbg_port +{ + unsigned char nbr; + unsigned long instance; + unsigned int started; + unsigned long baudrate; + unsigned char parity; + unsigned int bits; +}; + +struct dbg_port ports[] = +{ + { + 0, + regi_ser0, + 0, + 115200, + 'N', + 8 + }, + { + 1, + regi_ser1, + 0, + 115200, + 'N', + 8 + }, + { + 2, + regi_ser2, + 0, + 115200, + 'N', + 8 + }, + { + 3, + regi_ser3, + 0, + 115200, + 'N', + 8 + } +}; +static struct dbg_port *port = +#if defined(CONFIG_ETRAX_DEBUG_PORT0) +&ports[0]; +#elif defined(CONFIG_ETRAX_DEBUG_PORT1) +&ports[1]; +#elif defined(CONFIG_ETRAX_DEBUG_PORT2) +&ports[2]; +#elif defined(CONFIG_ETRAX_DEBUG_PORT3) +&ports[3]; +#else +NULL; +#endif + +#ifdef CONFIG_ETRAX_KGDB +static struct dbg_port *kgdb_port = +#if defined(CONFIG_ETRAX_KGDB_PORT0) +&ports[0]; +#elif defined(CONFIG_ETRAX_KGDB_PORT1) +&ports[1]; +#elif defined(CONFIG_ETRAX_KGDB_PORT2) +&ports[2]; +#elif defined(CONFIG_ETRAX_KGDB_PORT3) +&ports[3]; +#else +NULL; +#endif +#endif + +#ifdef CONFIG_ETRAXFS_SIM +extern void print_str( const char *str ); +static char buffer[1024]; +static char msg[] = "Debug: "; +static int buffer_pos = sizeof(msg) - 1; +#endif + +extern struct tty_driver *serial_driver; + +static void +start_port(struct dbg_port* p) +{ + if (!p) + return; + + if (p->started) + return; + p->started = 1; + + if (p->nbr == 1) + crisv32_pinmux_alloc_fixed(pinmux_ser1); + else if (p->nbr == 2) + crisv32_pinmux_alloc_fixed(pinmux_ser2); + else if (p->nbr == 3) + crisv32_pinmux_alloc_fixed(pinmux_ser3); + + /* Set up serial port registers */ + reg_ser_rw_tr_ctrl tr_ctrl = {0}; + reg_ser_rw_tr_dma_en tr_dma_en = {0}; + + reg_ser_rw_rec_ctrl rec_ctrl = {0}; + reg_ser_rw_tr_baud_div tr_baud_div = {0}; + reg_ser_rw_rec_baud_div rec_baud_div = {0}; + + tr_ctrl.base_freq = rec_ctrl.base_freq = regk_ser_f29_493; + tr_dma_en.en = rec_ctrl.dma_mode = regk_ser_no; + tr_baud_div.div = rec_baud_div.div = 29493000 / p->baudrate / 8; + tr_ctrl.en = rec_ctrl.en = 1; + + if (p->parity == 'O') + { + tr_ctrl.par_en = regk_ser_yes; + tr_ctrl.par = regk_ser_odd; + rec_ctrl.par_en = regk_ser_yes; + rec_ctrl.par = regk_ser_odd; + } + else if (p->parity == 'E') + { + tr_ctrl.par_en = regk_ser_yes; + tr_ctrl.par = regk_ser_even; + rec_ctrl.par_en = regk_ser_yes; + rec_ctrl.par = regk_ser_odd; + } + + if (p->bits == 7) + { + tr_ctrl.data_bits = regk_ser_bits7; + rec_ctrl.data_bits = regk_ser_bits7; + } + + REG_WR (ser, p->instance, rw_tr_baud_div, tr_baud_div); + REG_WR (ser, p->instance, rw_rec_baud_div, rec_baud_div); + REG_WR (ser, p->instance, rw_tr_dma_en, tr_dma_en); + REG_WR (ser, p->instance, rw_tr_ctrl, tr_ctrl); + REG_WR (ser, p->instance, rw_rec_ctrl, rec_ctrl); +} + +/* No debug */ +#ifdef CONFIG_ETRAX_DEBUG_PORT_NULL + +static void +console_write(struct console *co, const char *buf, unsigned int len) +{ + return; +} + +/* Target debug */ +#elif !defined(CONFIG_ETRAXFS_SIM) + +static void +console_write_direct(struct console *co, const char *buf, unsigned int len) +{ + int i; + reg_ser_r_stat_din stat; + reg_ser_rw_tr_dma_en tr_dma_en, old; + + /* Switch to manual mode */ + tr_dma_en = old = REG_RD (ser, port->instance, rw_tr_dma_en); + if (tr_dma_en.en == regk_ser_yes) { + tr_dma_en.en = regk_ser_no; + REG_WR(ser, port->instance, rw_tr_dma_en, tr_dma_en); + } + + /* Send data */ + for (i = 0; i < len; i++) { + /* LF -> CRLF */ + if (buf[i] == '\n') { + do { + stat = REG_RD (ser, port->instance, r_stat_din); + } while (!stat.tr_rdy); + REG_WR_INT (ser, port->instance, rw_dout, '\r'); + } + /* Wait until transmitter is ready and send.*/ + do { + stat = REG_RD (ser, port->instance, r_stat_din); + } while (!stat.tr_rdy); + REG_WR_INT (ser, port->instance, rw_dout, buf[i]); + } + + /* Restore mode */ + if (tr_dma_en.en != old.en) + REG_WR(ser, port->instance, rw_tr_dma_en, old); +} + +static void +console_write(struct console *co, const char *buf, unsigned int len) +{ + if (!port) + return; + console_write_direct(co, buf, len); +} + + + +#else + +/* VCS debug */ + +static void +console_write(struct console *co, const char *buf, unsigned int len) +{ + char* pos; + pos = memchr(buf, '\n', len); + if (pos) { + int l = ++pos - buf; + memcpy(buffer + buffer_pos, buf, l); + memcpy(buffer, msg, sizeof(msg) - 1); + buffer[buffer_pos + l] = '\0'; + print_str(buffer); + buffer_pos = sizeof(msg) - 1; + if (pos - buf != len) { + memcpy(buffer + buffer_pos, pos, len - l); + buffer_pos += len - l; + } + } else { + memcpy(buffer + buffer_pos, buf, len); + buffer_pos += len; + } +} + +#endif + +int raw_printk(const char *fmt, ...) +{ + static char buf[1024]; + int printed_len; + va_list args; + va_start(args, fmt); + printed_len = vsnprintf(buf, sizeof(buf), fmt, args); + va_end(args); + console_write(NULL, buf, strlen(buf)); + return printed_len; +} + +void +stupid_debug(char* buf) +{ + console_write(NULL, buf, strlen(buf)); +} + +#ifdef CONFIG_ETRAX_KGDB +/* Use polling to get a single character from the kernel debug port */ +int +getDebugChar(void) +{ + reg_ser_rs_status_data stat; + reg_ser_rw_ack_intr ack_intr = { 0 }; + + do { + stat = REG_RD(ser, kgdb_instance, rs_status_data); + } while (!stat.data_avail); + + /* Ack the data_avail interrupt. */ + ack_intr.data_avail = 1; + REG_WR(ser, kgdb_instance, rw_ack_intr, ack_intr); + + return stat.data; +} + +/* Use polling to put a single character to the kernel debug port */ +void +putDebugChar(int val) +{ + reg_ser_r_status_data stat; + do { + stat = REG_RD (ser, kgdb_instance, r_status_data); + } while (!stat.tr_ready); + REG_WR (ser, kgdb_instance, rw_data_out, REG_TYPE_CONV(reg_ser_rw_data_out, int, val)); +} +#endif /* CONFIG_ETRAX_KGDB */ + +static int __init +console_setup(struct console *co, char *options) +{ + char* s; + + if (options) { + port = &ports[co->index]; + port->baudrate = 115200; + port->parity = 'N'; + port->bits = 8; + port->baudrate = simple_strtoul(options, NULL, 10); + s = options; + while(*s >= '0' && *s <= '9') + s++; + if (*s) port->parity = *s++; + if (*s) port->bits = *s++ - '0'; + port->started = 0; + start_port(port); + } + return 0; +} + +/* This is a dummy serial device that throws away anything written to it. + * This is used when no debug output is wanted. + */ +static struct tty_driver dummy_driver; + +static int dummy_open(struct tty_struct *tty, struct file * filp) +{ + return 0; +} + +static void dummy_close(struct tty_struct *tty, struct file * filp) +{ +} + +static int dummy_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + return count; +} + +static int +dummy_write_room(struct tty_struct *tty) +{ + return 8192; +} + +void __init +init_dummy_console(void) +{ + memset(&dummy_driver, 0, sizeof(struct tty_driver)); + dummy_driver.driver_name = "serial"; + dummy_driver.name = "ttyS"; + dummy_driver.major = TTY_MAJOR; + dummy_driver.minor_start = 68; + dummy_driver.num = 1; /* etrax100 has 4 serial ports */ + dummy_driver.type = TTY_DRIVER_TYPE_SERIAL; + dummy_driver.subtype = SERIAL_TYPE_NORMAL; + dummy_driver.init_termios = tty_std_termios; + dummy_driver.init_termios.c_cflag = + B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */ + dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS; + + dummy_driver.open = dummy_open; + dummy_driver.close = dummy_close; + dummy_driver.write = dummy_write; + dummy_driver.write_room = dummy_write_room; + if (tty_register_driver(&dummy_driver)) + panic("Couldn't register dummy serial driver\n"); +} + +static struct tty_driver* +crisv32_console_device(struct console* co, int *index) +{ + if (port) + *index = port->nbr; + return port ? serial_driver : &dummy_driver; +} + +static struct console sercons = { + name : "ttyS", + write: console_write, + read : NULL, + device : crisv32_console_device, + unblank : NULL, + setup : console_setup, + flags : CON_PRINTBUFFER, + index : -1, + cflag : 0, + next : NULL +}; +static struct console sercons0 = { + name : "ttyS", + write: console_write, + read : NULL, + device : crisv32_console_device, + unblank : NULL, + setup : console_setup, + flags : CON_PRINTBUFFER, + index : 0, + cflag : 0, + next : NULL +}; + +static struct console sercons1 = { + name : "ttyS", + write: console_write, + read : NULL, + device : crisv32_console_device, + unblank : NULL, + setup : console_setup, + flags : CON_PRINTBUFFER, + index : 1, + cflag : 0, + next : NULL +}; +static struct console sercons2 = { + name : "ttyS", + write: console_write, + read : NULL, + device : crisv32_console_device, + unblank : NULL, + setup : console_setup, + flags : CON_PRINTBUFFER, + index : 2, + cflag : 0, + next : NULL +}; +static struct console sercons3 = { + name : "ttyS", + write: console_write, + read : NULL, + device : crisv32_console_device, + unblank : NULL, + setup : console_setup, + flags : CON_PRINTBUFFER, + index : 3, + cflag : 0, + next : NULL +}; + +/* Register console for printk's, etc. */ +int __init +init_etrax_debug(void) +{ + static int first = 1; + + if (!first) { + unregister_console(&sercons); + register_console(&sercons0); + register_console(&sercons1); + register_console(&sercons2); + register_console(&sercons3); + init_dummy_console(); + return 0; + } + first = 0; + register_console(&sercons); + start_port(port); + +#ifdef CONFIG_ETRAX_KGDB + start_port(kgdb_port); +#endif /* CONFIG_ETRAX_KGDB */ + return 0; +} + +__initcall(init_etrax_debug); diff --git a/arch/cris/arch-v32/kernel/dma.c b/arch/cris/arch-v32/kernel/dma.c new file mode 100644 index 000000000000..b92e85799b44 --- /dev/null +++ b/arch/cris/arch-v32/kernel/dma.c @@ -0,0 +1,224 @@ +/* Wrapper for DMA channel allocator that starts clocks etc */ + +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <asm/dma.h> +#include <asm/arch/hwregs/reg_map.h> +#include <asm/arch/hwregs/reg_rdwr.h> +#include <asm/arch/hwregs/marb_defs.h> +#include <asm/arch/hwregs/config_defs.h> +#include <asm/arch/hwregs/strmux_defs.h> +#include <linux/errno.h> +#include <asm/system.h> +#include <asm/arch/arbiter.h> + +static char used_dma_channels[MAX_DMA_CHANNELS]; +static const char * used_dma_channels_users[MAX_DMA_CHANNELS]; + +static DEFINE_SPINLOCK(dma_lock); + +int crisv32_request_dma(unsigned int dmanr, const char * device_id, + unsigned options, unsigned int bandwidth, + enum dma_owner owner) +{ + unsigned long flags; + reg_config_rw_clk_ctrl clk_ctrl; + reg_strmux_rw_cfg strmux_cfg; + + if (crisv32_arbiter_allocate_bandwith(dmanr, + options & DMA_INT_MEM ? INT_REGION : EXT_REGION, + bandwidth)) + return -ENOMEM; + + spin_lock_irqsave(&dma_lock, flags); + + if (used_dma_channels[dmanr]) { + spin_unlock_irqrestore(&dma_lock, flags); + if (options & DMA_VERBOSE_ON_ERROR) { + printk("Failed to request DMA %i for %s, already allocated by %s\n", dmanr, device_id, used_dma_channels_users[dmanr]); + } + if (options & DMA_PANIC_ON_ERROR) + panic("request_dma error!"); + return -EBUSY; + } + clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl); + strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg); + + switch(dmanr) + { + case 0: + case 1: + clk_ctrl.dma01_eth0 = 1; + break; + case 2: + case 3: + clk_ctrl.dma23 = 1; + break; + case 4: + case 5: + clk_ctrl.dma45 = 1; + break; + case 6: + case 7: + clk_ctrl.dma67 = 1; + break; + case 8: + case 9: + clk_ctrl.dma89_strcop = 1; + break; +#if MAX_DMA_CHANNELS-1 != 9 +#error Check dma.c +#endif + default: + spin_unlock_irqrestore(&dma_lock, flags); + if (options & DMA_VERBOSE_ON_ERROR) { + printk("Failed to request DMA %i for %s, only 0-%i valid)\n", dmanr, device_id, MAX_DMA_CHANNELS-1); + } + + if (options & DMA_PANIC_ON_ERROR) + panic("request_dma error!"); + return -EINVAL; + } + + switch(owner) + { + case dma_eth0: + if (dmanr == 0) + strmux_cfg.dma0 = regk_strmux_eth0; + else if (dmanr == 1) + strmux_cfg.dma1 = regk_strmux_eth0; + else + panic("Invalid DMA channel for eth0\n"); + break; + case dma_eth1: + if (dmanr == 6) + strmux_cfg.dma6 = regk_strmux_eth1; + else if (dmanr == 7) + strmux_cfg.dma7 = regk_strmux_eth1; + else + panic("Invalid DMA channel for eth1\n"); + break; + case dma_iop0: + if (dmanr == 2) + strmux_cfg.dma2 = regk_strmux_iop0; + else if (dmanr == 3) + strmux_cfg.dma3 = regk_strmux_iop0; + else + panic("Invalid DMA channel for iop0\n"); + break; + case dma_iop1: + if (dmanr == 4) + strmux_cfg.dma4 = regk_strmux_iop1; + else if (dmanr == 5) + strmux_cfg.dma5 = regk_strmux_iop1; + else + panic("Invalid DMA channel for iop1\n"); + break; + case dma_ser0: + if (dmanr == 6) + strmux_cfg.dma6 = regk_strmux_ser0; + else if (dmanr == 7) + strmux_cfg.dma7 = regk_strmux_ser0; + else + panic("Invalid DMA channel for ser0\n"); + break; + case dma_ser1: + if (dmanr == 4) + strmux_cfg.dma4 = regk_strmux_ser1; + else if (dmanr == 5) + strmux_cfg.dma5 = regk_strmux_ser1; + else + panic("Invalid DMA channel for ser1\n"); + break; + case dma_ser2: + if (dmanr == 2) + strmux_cfg.dma2 = regk_strmux_ser2; + else if (dmanr == 3) + strmux_cfg.dma3 = regk_strmux_ser2; + else + panic("Invalid DMA channel for ser2\n"); + break; + case dma_ser3: + if (dmanr == 8) + strmux_cfg.dma8 = regk_strmux_ser3; + else if (dmanr == 9) + strmux_cfg.dma9 = regk_strmux_ser3; + else + panic("Invalid DMA channel for ser3\n"); + break; + case dma_sser0: + if (dmanr == 4) + strmux_cfg.dma4 = regk_strmux_sser0; + else if (dmanr == 5) + strmux_cfg.dma5 = regk_strmux_sser0; + else + panic("Invalid DMA channel for sser0\n"); + break; + case dma_sser1: + if (dmanr == 6) + strmux_cfg.dma6 = regk_strmux_sser1; + else if (dmanr == 7) + strmux_cfg.dma7 = regk_strmux_sser1; + else + panic("Invalid DMA channel for sser1\n"); + break; + case dma_ata: + if (dmanr == 2) + strmux_cfg.dma2 = regk_strmux_ata; + else if (dmanr == 3) + strmux_cfg.dma3 = regk_strmux_ata; + else + panic("Invalid DMA channel for ata\n"); + break; + case dma_strp: + if (dmanr == 8) + strmux_cfg.dma8 = regk_strmux_strcop; + else if (dmanr == 9) + strmux_cfg.dma9 = regk_strmux_strcop; + else + panic("Invalid DMA channel for strp\n"); + break; + case dma_ext0: + if (dmanr == 6) + strmux_cfg.dma6 = regk_strmux_ext0; + else + panic("Invalid DMA channel for ext0\n"); + break; + case dma_ext1: + if (dmanr == 7) + strmux_cfg.dma7 = regk_strmux_ext1; + else + panic("Invalid DMA channel for ext1\n"); + break; + case dma_ext2: + if (dmanr == 2) + strmux_cfg.dma2 = regk_strmux_ext2; + else if (dmanr == 8) + strmux_cfg.dma8 = regk_strmux_ext2; + else + panic("Invalid DMA channel for ext2\n"); + break; + case dma_ext3: + if (dmanr == 3) + strmux_cfg.dma3 = regk_strmux_ext3; + else if (dmanr == 9) + strmux_cfg.dma9 = regk_strmux_ext2; + else + panic("Invalid DMA channel for ext2\n"); + break; + } + + used_dma_channels[dmanr] = 1; + used_dma_channels_users[dmanr] = device_id; + REG_WR(config, regi_config, rw_clk_ctrl, clk_ctrl); + REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg); + spin_unlock_irqrestore(&dma_lock,flags); + return 0; +} + +void crisv32_free_dma(unsigned int dmanr) +{ + spin_lock(&dma_lock); + used_dma_channels[dmanr] = 0; + spin_unlock(&dma_lock); +} diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S new file mode 100644 index 000000000000..a8ed55e5b403 --- /dev/null +++ b/arch/cris/arch-v32/kernel/entry.S @@ -0,0 +1,820 @@ +/* + * Copyright (C) 2000-2003 Axis Communications AB + * + * Authors: Bjorn Wesen (bjornw@axis.com) + * Tobias Anderberg (tobiasa@axis.com), CRISv32 port. + * + * Code for the system-call and fault low-level handling routines. + * + * NOTE: This code handles signal-recognition, which happens every time + * after a timer-interrupt and after each system call. + * + * Stack layout in 'ret_from_system_call': + * ptrace needs to have all regs on the stack. + * if the order here is changed, it needs to be + * updated in fork.c:copy_process, signal.c:do_signal, + * ptrace.c and ptrace.h + * + */ + +#include <linux/config.h> +#include <linux/linkage.h> +#include <linux/sys.h> +#include <asm/unistd.h> +#include <asm/errno.h> +#include <asm/thread_info.h> +#include <asm/arch/offset.h> + +#include <asm/arch/hwregs/asm/reg_map_asm.h> +#include <asm/arch/hwregs/asm/intr_vect_defs_asm.h> + + ;; Exported functions. + .globl system_call + .globl ret_from_intr + .globl ret_from_fork + .globl resume + .globl multiple_interrupt + .globl nmi_interrupt + .globl spurious_interrupt + .globl do_sigtrap + .globl gdb_handle_exception + .globl sys_call_table + + ; Check if preemptive kernel scheduling should be done. +#ifdef CONFIG_PREEMPT +_resume_kernel: + di + ; Load current task struct. + movs.w -8192, $r0 ; THREAD_SIZE = 8192 + and.d $sp, $r0 + + addoq +TI_preempt_count, $r0, $acr + move.d [$acr], $r10 ; Preemption disabled? + bne _Rexit + nop + +_need_resched: + addoq +TI_flags, $r0, $acr + move.d [$acr], $r10 + btstq TIF_NEED_RESCHED, $r10 ; Check if need_resched is set. + bpl _Rexit + nop + + ; Do preemptive kernel scheduling. + jsr preempt_schedule_irq + nop + + ; Load new task struct. + movs.w -8192, $r0 ; THREAD_SIZE = 8192. + and.d $sp, $r0 + + ; One more time with new task. + ba _need_resched + nop +#else +#define _resume_kernel _Rexit +#endif + + ; Called at exit from fork. schedule_tail must be called to drop + ; spinlock if CONFIG_PREEMPT. +ret_from_fork: + jsr schedule_tail + nop + ba ret_from_sys_call + nop + +ret_from_intr: + ;; Check for resched if preemptive kernel, or if we're going back to + ;; user-mode. This test matches the user_regs(regs) macro. Don't simply + ;; test CCS since that doesn't necessarily reflect what mode we'll + ;; return into. + addoq +PT_ccs, $sp, $acr + move.d [$acr], $r0 + btstq 16, $r0 ; User-mode flag. + bpl _resume_kernel + + ; Note that di below is in delay slot. + +_resume_userspace: + di ; So need_resched and sigpending don't change. + + movs.w -8192, $r0 ; THREAD_SIZE == 8192 + and.d $sp, $r0 + + addoq +TI_flags, $r0, $acr ; current->work + move.d [$acr], $r10 + and.d _TIF_WORK_MASK, $r10 ; Work to be done on return? + bne _work_pending + nop + ba _Rexit + nop + + ;; The system_call is called by a BREAK instruction, which looks pretty + ;; much like any other exception. + ;; + ;; System calls can't be made from interrupts but we still stack ERP + ;; to have a complete stack frame. + ;; + ;; In r9 we have the wanted syscall number. Arguments come in r10,r11,r12, + ;; r13,mof,srp + ;; + ;; This function looks on the _surface_ like spaghetti programming, but it's + ;; really designed so that the fast-path does not force cache-loading of + ;; non-used instructions. Only the non-common cases cause the outlined code + ;; to run.. + +system_call: + ;; Stack-frame similar to the irq heads, which is reversed in + ;; ret_from_sys_call. + subq 12, $sp ; Skip EXS, EDA. + move $erp, [$sp] + subq 4, $sp + move $srp, [$sp] + subq 4, $sp + move $ccs, [$sp] + subq 4, $sp + ei ; Allow IRQs while handling system call + move $spc, [$sp] + subq 4, $sp + move $mof, [$sp] + subq 4, $sp + move $srs, [$sp] + subq 4, $sp + move.d $acr, [$sp] + subq 14*4, $sp ; Make room for R0-R13. + movem $r13, [$sp] ; Push R0-R13 + subq 4, $sp + move.d $r10, [$sp] ; Push orig_r10. + +; Set S-bit when kernel debugging to keep hardware breakpoints active. +#ifdef CONFIG_ETRAX_KGDB + move $ccs, $r0 + or.d (1<<9), $r0 + move $r0, $ccs +#endif + + movs.w -ENOSYS, $r0 + addoq +PT_r10, $sp, $acr + move.d $r0, [$acr] + + ;; Check if this process is syscall-traced. + movs.w -8192, $r0 ; THREAD_SIZE == 8192 + and.d $sp, $r0 + + addoq +TI_flags, $r0, $acr + move.d [$acr], $r0 + btstq TIF_SYSCALL_TRACE, $r0 + bmi _syscall_trace_entry + nop + +_syscall_traced: + ;; Check for sanity in the requested syscall number. + cmpu.w NR_syscalls, $r9 + bhs ret_from_sys_call + lslq 2, $r9 ; Multiply by 4, in the delay slot. + + ;; The location on the stack for the register structure is passed as a + ;; seventh argument. Some system calls need this. + move.d $sp, $r0 + subq 4, $sp + move.d $r0, [$sp] + + ;; The registers carrying parameters (R10-R13) are intact. The optional + ;; fifth and sixth parameters is in MOF and SRP respectivly. Put them + ;; back on the stack. + subq 4, $sp + move $srp, [$sp] + subq 4, $sp + move $mof, [$sp] + + ;; Actually to the system call. + addo.d +sys_call_table, $r9, $acr + move.d [$acr], $acr + jsr $acr + nop + + addq 3*4, $sp ; Pop the mof, srp and regs parameters. + addoq +PT_r10, $sp, $acr + move.d $r10, [$acr] ; Save the return value. + + moveq 1, $r9 ; "Parameter" to ret_from_sys_call to + ; show it was a sys call. + + ;; Fall through into ret_from_sys_call to return. + +ret_from_sys_call: + ;; R9 is a parameter: + ;; >= 1 from syscall + ;; 0 from irq + + ;; Get the current task-struct pointer. + movs.w -8192, $r0 ; THREAD_SIZE == 8192 + and.d $sp, $r0 + + di ; Make sure need_resched and sigpending don't change. + + addoq +TI_flags, $r0, $acr + move.d [$acr], $r1 + and.d _TIF_ALLWORK_MASK, $r1 + bne _syscall_exit_work + nop + +_Rexit: + ;; This epilogue MUST match the prologues in multiple_interrupt, irq.h + ;; and ptregs.h. + addq 4, $sp ; Skip orig_r10. + movem [$sp+], $r13 ; Registers R0-R13. + move.d [$sp+], $acr + move [$sp], $srs + addq 4, $sp + move [$sp+], $mof + move [$sp+], $spc + move [$sp+], $ccs + move [$sp+], $srp + move [$sp+], $erp + addq 8, $sp ; Skip EXS, EDA. + jump $erp + rfe ; Restore condition code stack in delay-slot. + + ;; We get here after doing a syscall if extra work might need to be done + ;; perform syscall exit tracing if needed. + +_syscall_exit_work: + ;; R0 contains current at this point and irq's are disabled. + + addoq +TI_flags, $r0, $acr + move.d [$acr], $r1 + btstq TIF_SYSCALL_TRACE, $r1 + bpl _work_pending + nop + ei + move.d $r9, $r1 ; Preserve R9. + jsr do_syscall_trace + nop + move.d $r1, $r9 + ba _resume_userspace + nop + +_work_pending: + addoq +TI_flags, $r0, $acr + move.d [$acr], $r10 + btstq TIF_NEED_RESCHED, $r10 ; Need resched? + bpl _work_notifysig ; No, must be signal/notify. + nop + +_work_resched: + move.d $r9, $r1 ; Preserve R9. + jsr schedule + nop + move.d $r1, $r9 + di + + addoq +TI_flags, $r0, $acr + move.d [$acr], $r1 + and.d _TIF_WORK_MASK, $r1 ; Ignore sycall trace counter. + beq _Rexit + nop + btstq TIF_NEED_RESCHED, $r1 + bmi _work_resched ; current->work.need_resched. + nop + +_work_notifysig: + ;; Deal with pending signals and notify-resume requests. + + addoq +TI_flags, $r0, $acr + move.d [$acr], $r13 ; The thread_info_flags parameter. + move.d $r9, $r10 ; do_notify_resume syscall/irq param. + moveq 0, $r11 ; oldset param - 0 in this case. + move.d $sp, $r12 ; The regs param. + jsr do_notify_resume + nop + + ba _Rexit + nop + + ;; We get here as a sidetrack when we've entered a syscall with the + ;; trace-bit set. We need to call do_syscall_trace and then continue + ;; with the call. + +_syscall_trace_entry: + ;; PT_r10 in the frame contains -ENOSYS as required, at this point. + + jsr do_syscall_trace + nop + + ;; Now re-enter the syscall code to do the syscall itself. We need to + ;; restore R9 here to contain the wanted syscall, and the other + ;; parameter-bearing registers. + addoq +PT_r9, $sp, $acr + move.d [$acr], $r9 + addoq +PT_orig_r10, $sp, $acr + move.d [$acr], $r10 ; PT_r10 is already -ENOSYS. + addoq +PT_r11, $sp, $acr + move.d [$acr], $r11 + addoq +PT_r12, $sp, $acr + move.d [$acr], $r12 + addoq +PT_r13, $sp, $acr + move.d [$acr], $r13 + addoq +PT_mof, $sp, $acr + move [$acr], $mof + addoq +PT_srp, $sp, $acr + move [$acr], $srp + + ba _syscall_traced + nop + + ;; Resume performs the actual task-switching, by switching stack + ;; pointers. Input arguments are: + ;; + ;; R10 = prev + ;; R11 = next + ;; R12 = thread offset in task struct. + ;; + ;; Returns old current in R10. + +resume: + subq 4, $sp + move $srp, [$sp] ; Keep old/new PC on the stack. + add.d $r12, $r10 ; R10 = current tasks tss. + addoq +THREAD_ccs, $r10, $acr + move $ccs, [$acr] ; Save IRQ enable state. + di + + addoq +THREAD_usp, $r10, $acr + move $usp, [$acr] ; Save user-mode stackpointer. + + ;; See copy_thread for the reason why register R9 is saved. + subq 10*4, $sp + movem $r9, [$sp] ; Save non-scratch registers and R9. + + addoq +THREAD_ksp, $r10, $acr + move.d $sp, [$acr] ; Save kernel SP for old task. + + move.d $sp, $r10 ; Return last running task in R10. + and.d -8192, $r10 ; Get thread_info from stackpointer. + addoq +TI_task, $r10, $acr + move.d [$acr], $r10 ; Get task. + add.d $r12, $r11 ; Find the new tasks tss. + addoq +THREAD_ksp, $r11, $acr + move.d [$acr], $sp ; Switch to new stackframe. + movem [$sp+], $r9 ; Restore non-scratch registers and R9. + + addoq +THREAD_usp, $r11, $acr + move [$acr], $usp ; Restore user-mode stackpointer. + + addoq +THREAD_ccs, $r11, $acr + move [$acr], $ccs ; Restore IRQ enable status. + move.d [$sp+], $acr + jump $acr ; Restore PC. + nop + +nmi_interrupt: + +;; If we receive a watchdog interrupt while it is not expected, then set +;; up a canonical frame and dump register contents before dying. + + ;; This prologue MUST match the one in irq.h and the struct in ptregs.h! + subq 12, $sp ; Skip EXS, EDA. + move $nrp, [$sp] + subq 4, $sp + move $srp, [$sp] + subq 4, $sp + move $ccs, [$sp] + subq 4, $sp + move $spc, [$sp] + subq 4, $sp + move $mof, [$sp] + subq 4, $sp + move $srs, [$sp] + subq 4, $sp + move.d $acr, [$sp] + subq 14*4, $sp ; Make room for R0-R13. + movem $r13, [$sp] ; Push R0-R13. + subq 4, $sp + move.d $r10, [$sp] ; Push orig_r10. + move.d REG_ADDR(intr_vect, regi_irq, r_nmi), $r0 + move.d [$r0], $r0 + btstq REG_BIT(intr_vect, r_nmi, watchdog), $r0 + bpl 1f + nop + jsr handle_watchdog_bite ; In time.c. + move.d $sp, $r10 ; Pointer to registers +1: btstq REG_BIT(intr_vect, r_nmi, ext), $r0 + bpl 1f + nop + jsr handle_nmi + move.d $sp, $r10 ; Pointer to registers +1: addq 4, $sp ; Skip orig_r10 + movem [$sp+], $r13 + move.d [$sp+], $acr + move [$sp], $srs + addq 4, $sp + move [$sp+], $mof + move [$sp+], $spc + move [$sp+], $ccs + move [$sp+], $srp + move [$sp+], $nrp + addq 8, $sp ; Skip EXS, EDA. + jump $nrp + rfn + + .comm cause_of_death, 4 ;; Don't declare this anywhere. + +spurious_interrupt: + di + jump hard_reset_now + nop + + ;; This handles the case when multiple interrupts arrive at the same + ;; time. Jump to the first set interrupt bit in a priotiry fashion. The + ;; hardware will call the unserved interrupts after the handler + ;; finishes. +multiple_interrupt: + ;; This prologue MUST match the one in irq.h and the struct in ptregs.h! + subq 12, $sp ; Skip EXS, EDA. + move $erp, [$sp] + subq 4, $sp + move $srp, [$sp] + subq 4, $sp + move $ccs, [$sp] + subq 4, $sp + move $spc, [$sp] + subq 4, $sp + move $mof, [$sp] + subq 4, $sp + move $srs, [$sp] + subq 4, $sp + move.d $acr, [$sp] + subq 14*4, $sp ; Make room for R0-R13. + movem $r13, [$sp] ; Push R0-R13. + subq 4, $sp + move.d $r10, [$sp] ; Push orig_r10. + +; Set S-bit when kernel debugging to keep hardware breakpoints active. +#ifdef CONFIG_ETRAX_KGDB + move $ccs, $r0 + or.d (1<<9), $r0 + move $r0, $ccs +#endif + + jsr crisv32_do_multiple + move.d $sp, $r10 + jump ret_from_intr + nop + +do_sigtrap: + ;; Sigtraps the process that executed the BREAK instruction. Creates a + ;; frame that Rexit expects. + subq 4, $sp + move $eda, [$sp] + subq 4, $sp + move $exs, [$sp] + subq 4, $sp + move $erp, [$sp] + subq 4, $sp + move $srp, [$sp] + subq 4, $sp + move $ccs, [$sp] + subq 4, $sp + move $spc, [$sp] + subq 4, $sp + move $mof, [$sp] + subq 4, $sp + move $srs, [$sp] + subq 4, $sp + move.d $acr, [$sp] + di ; Need to disable irq's at this point. + subq 14*4, $sp ; Make room for r0-r13. + movem $r13, [$sp] ; Push the r0-r13 registers. + subq 4, $sp + move.d $r10, [$sp] ; Push orig_r10. + + movs.w -8192, $r9 ; THREAD_SIZE == 8192 + and.d $sp, $r9 + + ;; thread_info as first parameter + move.d $r9, $r10 + moveq 5, $r11 ; SIGTRAP as second argument. + jsr ugdb_trap_user + nop + jump ret_from_intr ; Use the return routine for interrupts. + nop + +gdb_handle_exception: + subq 4, $sp + move.d $r0, [$sp] +#ifdef CONFIG_ETRAX_KGDB + move $ccs, $r0 ; U-flag not affected by previous insns. + btstq 16, $r0 ; Test the U-flag. + bmi _ugdb_handle_exception ; Go to user mode debugging. + nop ; Empty delay-slot (cannot pop R0 here). + ba kgdb_handle_exception ; Go to kernel debugging. + move.d [$sp+], $r0 ; Restore R0 in delay slot. +#endif + +_ugdb_handle_exception: + ba do_sigtrap ; SIGTRAP the offending process. + move.d [$sp+], $r0 ; Restore R0 in delay slot. + + .data + + .section .rodata,"a" +sys_call_table: + .long sys_restart_syscall ; 0 - old "setup()" system call, used + ; for restarting. + .long sys_exit + .long sys_fork + .long sys_read + .long sys_write + .long sys_open /* 5 */ + .long sys_close + .long sys_waitpid + .long sys_creat + .long sys_link + .long sys_unlink /* 10 */ + .long sys_execve + .long sys_chdir + .long sys_time + .long sys_mknod + .long sys_chmod /* 15 */ + .long sys_lchown16 + .long sys_ni_syscall /* old break syscall holder */ + .long sys_stat + .long sys_lseek + .long sys_getpid /* 20 */ + .long sys_mount + .long sys_oldumount + .long sys_setuid16 + .long sys_getuid16 + .long sys_stime /* 25 */ + .long sys_ptrace + .long sys_alarm + .long sys_fstat + .long sys_pause + .long sys_utime /* 30 */ + .long sys_ni_syscall /* old stty syscall holder */ + .long sys_ni_syscall /* old gtty syscall holder */ + .long sys_access + .long sys_nice + .long sys_ni_syscall /* 35 old ftime syscall holder */ + .long sys_sync + .long sys_kill + .long sys_rename + .long sys_mkdir + .long sys_rmdir /* 40 */ + .long sys_dup + .long sys_pipe + .long sys_times + .long sys_ni_syscall /* old prof syscall holder */ + .long sys_brk /* 45 */ + .long sys_setgid16 + .long sys_getgid16 + .long sys_signal + .long sys_geteuid16 + .long sys_getegid16 /* 50 */ + .long sys_acct + .long sys_umount /* recycled never used phys( */ + .long sys_ni_syscall /* old lock syscall holder */ + .long sys_ioctl + .long sys_fcntl /* 55 */ + .long sys_ni_syscall /* old mpx syscall holder */ + .long sys_setpgid + .long sys_ni_syscall /* old ulimit syscall holder */ + .long sys_ni_syscall /* old sys_olduname holder */ + .long sys_umask /* 60 */ + .long sys_chroot + .long sys_ustat + .long sys_dup2 + .long sys_getppid + .long sys_getpgrp /* 65 */ + .long sys_setsid + .long sys_sigaction + .long sys_sgetmask + .long sys_ssetmask + .long sys_setreuid16 /* 70 */ + .long sys_setregid16 + .long sys_sigsuspend + .long sys_sigpending + .long sys_sethostname + .long sys_setrlimit /* 75 */ + .long sys_old_getrlimit + .long sys_getrusage + .long sys_gettimeofday + .long sys_settimeofday + .long sys_getgroups16 /* 80 */ + .long sys_setgroups16 + .long sys_select /* was old_select in Linux/E100 */ + .long sys_symlink + .long sys_lstat + .long sys_readlink /* 85 */ + .long sys_uselib + .long sys_swapon + .long sys_reboot + .long old_readdir + .long old_mmap /* 90 */ + .long sys_munmap + .long sys_truncate + .long sys_ftruncate + .long sys_fchmod + .long sys_fchown16 /* 95 */ + .long sys_getpriority + .long sys_setpriority + .long sys_ni_syscall /* old profil syscall holder */ + .long sys_statfs + .long sys_fstatfs /* 100 */ + .long sys_ni_syscall /* sys_ioperm in i386 */ + .long sys_socketcall + .long sys_syslog + .long sys_setitimer + .long sys_getitimer /* 105 */ + .long sys_newstat + .long sys_newlstat + .long sys_newfstat + .long sys_ni_syscall /* old sys_uname holder */ + .long sys_ni_syscall /* sys_iopl in i386 */ + .long sys_vhangup + .long sys_ni_syscall /* old "idle" system call */ + .long sys_ni_syscall /* vm86old in i386 */ + .long sys_wait4 + .long sys_swapoff /* 115 */ + .long sys_sysinfo + .long sys_ipc + .long sys_fsync + .long sys_sigreturn + .long sys_clone /* 120 */ + .long sys_setdomainname + .long sys_newuname + .long sys_ni_syscall /* sys_modify_ldt */ + .long sys_adjtimex + .long sys_mprotect /* 125 */ + .long sys_sigprocmask + .long sys_ni_syscall /* old "create_module" */ + .long sys_init_module + .long sys_delete_module + .long sys_ni_syscall /* 130: old "get_kernel_syms" */ + .long sys_quotactl + .long sys_getpgid + .long sys_fchdir + .long sys_bdflush + .long sys_sysfs /* 135 */ + .long sys_personality + .long sys_ni_syscall /* for afs_syscall */ + .long sys_setfsuid16 + .long sys_setfsgid16 + .long sys_llseek /* 140 */ + .long sys_getdents + .long sys_select + .long sys_flock + .long sys_msync + .long sys_readv /* 145 */ + .long sys_writev + .long sys_getsid + .long sys_fdatasync + .long sys_sysctl + .long sys_mlock /* 150 */ + .long sys_munlock + .long sys_mlockall + .long sys_munlockall + .long sys_sched_setparam + .long sys_sched_getparam /* 155 */ + .long sys_sched_setscheduler + .long sys_sched_getscheduler + .long sys_sched_yield + .long sys_sched_get_priority_max + .long sys_sched_get_priority_min /* 160 */ + .long sys_sched_rr_get_interval + .long sys_nanosleep + .long sys_mremap + .long sys_setresuid16 + .long sys_getresuid16 /* 165 */ + .long sys_ni_syscall /* sys_vm86 */ + .long sys_ni_syscall /* Old sys_query_module */ + .long sys_poll + .long sys_nfsservctl + .long sys_setresgid16 /* 170 */ + .long sys_getresgid16 + .long sys_prctl + .long sys_rt_sigreturn + .long sys_rt_sigaction + .long sys_rt_sigprocmask /* 175 */ + .long sys_rt_sigpending + .long sys_rt_sigtimedwait + .long sys_rt_sigqueueinfo + .long sys_rt_sigsuspend + .long sys_pread64 /* 180 */ + .long sys_pwrite64 + .long sys_chown16 + .long sys_getcwd + .long sys_capget + .long sys_capset /* 185 */ + .long sys_sigaltstack + .long sys_sendfile + .long sys_ni_syscall /* streams1 */ + .long sys_ni_syscall /* streams2 */ + .long sys_vfork /* 190 */ + .long sys_getrlimit + .long sys_mmap2 + .long sys_truncate64 + .long sys_ftruncate64 + .long sys_stat64 /* 195 */ + .long sys_lstat64 + .long sys_fstat64 + .long sys_lchown + .long sys_getuid + .long sys_getgid /* 200 */ + .long sys_geteuid + .long sys_getegid + .long sys_setreuid + .long sys_setregid + .long sys_getgroups /* 205 */ + .long sys_setgroups + .long sys_fchown + .long sys_setresuid + .long sys_getresuid + .long sys_setresgid /* 210 */ + .long sys_getresgid + .long sys_chown + .long sys_setuid + .long sys_setgid + .long sys_setfsuid /* 215 */ + .long sys_setfsgid + .long sys_pivot_root + .long sys_mincore + .long sys_madvise + .long sys_getdents64 /* 220 */ + .long sys_fcntl64 + .long sys_ni_syscall /* reserved for TUX */ + .long sys_ni_syscall + .long sys_gettid + .long sys_readahead /* 225 */ + .long sys_setxattr + .long sys_lsetxattr + .long sys_fsetxattr + .long sys_getxattr + .long sys_lgetxattr /* 230 */ + .long sys_fgetxattr + .long sys_listxattr + .long sys_llistxattr + .long sys_flistxattr + .long sys_removexattr /* 235 */ + .long sys_lremovexattr + .long sys_fremovexattr + .long sys_tkill + .long sys_sendfile64 + .long sys_futex /* 240 */ + .long sys_sched_setaffinity + .long sys_sched_getaffinity + .long sys_ni_syscall /* sys_set_thread_area */ + .long sys_ni_syscall /* sys_get_thread_area */ + .long sys_io_setup /* 245 */ + .long sys_io_destroy + .long sys_io_getevents + .long sys_io_submit + .long sys_io_cancel + .long sys_fadvise64 /* 250 */ + .long sys_ni_syscall + .long sys_exit_group + .long sys_lookup_dcookie + .long sys_epoll_create + .long sys_epoll_ctl /* 255 */ + .long sys_epoll_wait + .long sys_remap_file_pages + .long sys_set_tid_address + .long sys_timer_create + .long sys_timer_settime /* 260 */ + .long sys_timer_gettime + .long sys_timer_getoverrun + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime /* 265 */ + .long sys_clock_getres + .long sys_clock_nanosleep + .long sys_statfs64 + .long sys_fstatfs64 + .long sys_tgkill /* 270 */ + .long sys_utimes + .long sys_fadvise64_64 + .long sys_ni_syscall /* sys_vserver */ + .long sys_ni_syscall /* sys_mbind */ + .long sys_ni_syscall /* 275 sys_get_mempolicy */ + .long sys_ni_syscall /* sys_set_mempolicy */ + .long sys_mq_open + .long sys_mq_unlink + .long sys_mq_timedsend + .long sys_mq_timedreceive /* 280 */ + .long sys_mq_notify + .long sys_mq_getsetattr + .long sys_ni_syscall /* reserved for kexec */ + .long sys_waitid + + /* + * NOTE!! This doesn't have to be exact - we just have + * to make sure we have _enough_ of the "sys_ni_syscall" + * entries. Don't panic if you notice that this hasn't + * been shrunk every time we add a new system call. + */ + + .rept NR_syscalls - (.-sys_call_table) / 4 + .long sys_ni_syscall + .endr + diff --git a/arch/cris/arch-v32/kernel/fasttimer.c b/arch/cris/arch-v32/kernel/fasttimer.c new file mode 100644 index 000000000000..ea2b4a97c8c7 --- /dev/null +++ b/arch/cris/arch-v32/kernel/fasttimer.c @@ -0,0 +1,996 @@ +/* $Id: fasttimer.c,v 1.11 2005/01/04 11:15:46 starvik Exp $ + * linux/arch/cris/kernel/fasttimer.c + * + * Fast timers for ETRAX FS + * This may be useful in other OS than Linux so use 2 space indentation... + * + * $Log: fasttimer.c,v $ + * Revision 1.11 2005/01/04 11:15:46 starvik + * Don't share timer IRQ. + * + * Revision 1.10 2004/12/07 09:19:38 starvik + * Corrected includes. + * Use correct interrupt macros. + * + * Revision 1.9 2004/05/14 10:18:58 starvik + * Export fast_timer_list + * + * Revision 1.8 2004/05/14 07:58:03 starvik + * Merge of changes from 2.4 + * + * Revision 1.7 2003/07/10 12:06:14 starvik + * Return IRQ_NONE if irq wasn't handled + * + * Revision 1.6 2003/07/04 08:27:49 starvik + * Merge of Linux 2.5.74 + * + * Revision 1.5 2003/06/05 10:16:22 johana + * New INTR_VECT macros. + * + * Revision 1.4 2003/06/03 08:49:45 johana + * Fixed typo. + * + * Revision 1.3 2003/06/02 12:51:27 johana + * Now compiles. + * Commented some include files that probably can be removed. + * + * Revision 1.2 2003/06/02 12:09:41 johana + * Ported to ETRAX FS using the trig interrupt instead of timer1. + * + * Revision 1.3 2002/12/12 08:26:32 starvik + * Don't use C-comments inside CVS comments + * + * Revision 1.2 2002/12/11 15:42:02 starvik + * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/ + * + * Revision 1.1 2002/11/18 07:58:06 starvik + * Fast timers (from Linux 2.4) + * + * Revision 1.5 2002/10/15 06:21:39 starvik + * Added call to init_waitqueue_head + * + * Revision 1.4 2002/05/28 17:47:59 johana + * Added del_fast_timer() + * + * Revision 1.3 2002/05/28 16:16:07 johana + * Handle empty fast_timer_list + * + * Revision 1.2 2002/05/27 15:38:42 johana + * Made it compile without warnings on Linux 2.4. + * (includes, wait_queue, PROC_FS and snprintf) + * + * Revision 1.1 2002/05/27 15:32:25 johana + * arch/etrax100/kernel/fasttimer.c v1.8 from the elinux tree. + * + * Revision 1.8 2001/11/27 13:50:40 pkj + * Disable interrupts while stopping the timer and while modifying the + * list of active timers in timer1_handler() as it may be interrupted + * by other interrupts (e.g., the serial interrupt) which may add fast + * timers. + * + * Revision 1.7 2001/11/22 11:50:32 pkj + * * Only store information about the last 16 timers. + * * proc_fasttimer_read() now uses an allocated buffer, since it + * requires more space than just a page even for only writing the + * last 16 timers. The buffer is only allocated on request, so + * unless /proc/fasttimer is read, it is never allocated. + * * Renamed fast_timer_started to fast_timers_started to match + * fast_timers_added and fast_timers_expired. + * * Some clean-up. + * + * Revision 1.6 2000/12/13 14:02:08 johana + * Removed volatile for fast_timer_list + * + * Revision 1.5 2000/12/13 13:55:35 johana + * Added DEBUG_LOG, added som cli() and cleanup + * + * Revision 1.4 2000/12/05 13:48:50 johana + * Added range check when writing proc file, modified timer int handling + * + * Revision 1.3 2000/11/23 10:10:20 johana + * More debug/logging possibilities. + * Moved GET_JIFFIES_USEC() to timex.h and time.c + * + * Revision 1.2 2000/11/01 13:41:04 johana + * Clean up and bugfixes. + * Created new do_gettimeofday_fast() that gets a timeval struct + * with time based on jiffies and *R_TIMER0_DATA, uses a table + * for fast conversion of timer value to microseconds. + * (Much faster the standard do_gettimeofday() and we don't really + * wan't to use the true time - we wan't the "uptime" so timers don't screw up + * when we change the time. + * TODO: Add efficient support for continuous timers as well. + * + * Revision 1.1 2000/10/26 15:49:16 johana + * Added fasttimer, highresolution timers. + * + * Copyright (C) 2000,2001 2002, 2003 Axis Communications AB, Lund, Sweden + */ + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/vmalloc.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/delay.h> + +#include <asm/irq.h> +#include <asm/system.h> + +#include <linux/config.h> +#include <linux/version.h> + +#include <asm/arch/hwregs/reg_map.h> +#include <asm/arch/hwregs/reg_rdwr.h> +#include <asm/arch/hwregs/timer_defs.h> +#include <asm/fasttimer.h> +#include <linux/proc_fs.h> + +/* + * timer0 is running at 100MHz and generating jiffies timer ticks + * at 100 or 1000 HZ. + * fasttimer gives an API that gives timers that expire "between" the jiffies + * giving microsecond resolution (10 ns). + * fasttimer uses reg_timer_rw_trig register to get interrupt when + * r_time reaches a certain value. + */ + + +#define DEBUG_LOG_INCLUDED +#define FAST_TIMER_LOG +//#define FAST_TIMER_TEST + +#define FAST_TIMER_SANITY_CHECKS + +#ifdef FAST_TIMER_SANITY_CHECKS +#define SANITYCHECK(x) x +static int sanity_failed = 0; +#else +#define SANITYCHECK(x) +#endif + +#define D1(x) +#define D2(x) +#define DP(x) + +#define __INLINE__ inline + +static int fast_timer_running = 0; +static int fast_timers_added = 0; +static int fast_timers_started = 0; +static int fast_timers_expired = 0; +static int fast_timers_deleted = 0; +static int fast_timer_is_init = 0; +static int fast_timer_ints = 0; + +struct fast_timer *fast_timer_list = NULL; + +#ifdef DEBUG_LOG_INCLUDED +#define DEBUG_LOG_MAX 128 +static const char * debug_log_string[DEBUG_LOG_MAX]; +static unsigned long debug_log_value[DEBUG_LOG_MAX]; +static int debug_log_cnt = 0; +static int debug_log_cnt_wrapped = 0; + +#define DEBUG_LOG(string, value) \ +{ \ + unsigned long log_flags; \ + local_irq_save(log_flags); \ + debug_log_string[debug_log_cnt] = (string); \ + debug_log_value[debug_log_cnt] = (unsigned long)(value); \ + if (++debug_log_cnt >= DEBUG_LOG_MAX) \ + { \ + debug_log_cnt = debug_log_cnt % DEBUG_LOG_MAX; \ + debug_log_cnt_wrapped = 1; \ + } \ + local_irq_restore(log_flags); \ +} +#else +#define DEBUG_LOG(string, value) +#endif + + +#define NUM_TIMER_STATS 16 +#ifdef FAST_TIMER_LOG +struct fast_timer timer_added_log[NUM_TIMER_STATS]; +struct fast_timer timer_started_log[NUM_TIMER_STATS]; +struct fast_timer timer_expired_log[NUM_TIMER_STATS]; +#endif + +int timer_div_settings[NUM_TIMER_STATS]; +int timer_delay_settings[NUM_TIMER_STATS]; + + +static void +timer_trig_handler(void); + + + +/* Not true gettimeofday, only checks the jiffies (uptime) + useconds */ +void __INLINE__ do_gettimeofday_fast(struct timeval *tv) +{ + unsigned long sec = jiffies; + unsigned long usec = GET_JIFFIES_USEC(); + + usec += (sec % HZ) * (1000000 / HZ); + sec = sec / HZ; + + if (usec > 1000000) + { + usec -= 1000000; + sec++; + } + tv->tv_sec = sec; + tv->tv_usec = usec; +} + +int __INLINE__ timeval_cmp(struct timeval *t0, struct timeval *t1) +{ + if (t0->tv_sec < t1->tv_sec) + { + return -1; + } + else if (t0->tv_sec > t1->tv_sec) + { + return 1; + } + if (t0->tv_usec < t1->tv_usec) + { + return -1; + } + else if (t0->tv_usec > t1->tv_usec) + { + return 1; + } + return 0; +} + +/* Called with ints off */ +void __INLINE__ start_timer_trig(unsigned long delay_us) +{ + reg_timer_rw_ack_intr ack_intr = { 0 }; + reg_timer_rw_intr_mask intr_mask; + reg_timer_rw_trig trig; + reg_timer_rw_trig_cfg trig_cfg = { 0 }; + reg_timer_r_time r_time; + + r_time = REG_RD(timer, regi_timer, r_time); + + D1(printk("start_timer_trig : %d us freq: %i div: %i\n", + delay_us, freq_index, div)); + /* Clear trig irq */ + intr_mask = REG_RD(timer, regi_timer, rw_intr_mask); + intr_mask.trig = 0; + REG_WR(timer, regi_timer, rw_intr_mask, intr_mask); + + /* Set timer values */ + /* r_time is 100MHz (10 ns resolution) */ + trig = r_time + delay_us*(1000/10); + + timer_div_settings[fast_timers_started % NUM_TIMER_STATS] = trig; + timer_delay_settings[fast_timers_started % NUM_TIMER_STATS] = delay_us; + + /* Ack interrupt */ + ack_intr.trig = 1; + REG_WR(timer, regi_timer, rw_ack_intr, ack_intr); + + /* Start timer */ + REG_WR(timer, regi_timer, rw_trig, trig); + trig_cfg.tmr = regk_timer_time; + REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg); + + /* Check if we have already passed the trig time */ + r_time = REG_RD(timer, regi_timer, r_time); + if (r_time < trig) { + /* No, Enable trig irq */ + intr_mask = REG_RD(timer, regi_timer, rw_intr_mask); + intr_mask.trig = 1; + REG_WR(timer, regi_timer, rw_intr_mask, intr_mask); + fast_timers_started++; + fast_timer_running = 1; + } + else + { + /* We have passed the time, disable trig point, ack intr */ + trig_cfg.tmr = regk_timer_off; + REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg); + REG_WR(timer, regi_timer, rw_ack_intr, ack_intr); + /* call the int routine directly */ + timer_trig_handler(); + } + +} + +/* In version 1.4 this function takes 27 - 50 us */ +void start_one_shot_timer(struct fast_timer *t, + fast_timer_function_type *function, + unsigned long data, + unsigned long delay_us, + const char *name) +{ + unsigned long flags; + struct fast_timer *tmp; + + D1(printk("sft %s %d us\n", name, delay_us)); + + local_irq_save(flags); + + do_gettimeofday_fast(&t->tv_set); + tmp = fast_timer_list; + + SANITYCHECK({ /* Check so this is not in the list already... */ + while (tmp != NULL) + { + if (tmp == t) + { + printk("timer name: %s data: 0x%08lX already in list!\n", name, data); + sanity_failed++; + return; + } + else + { + tmp = tmp->next; + } + } + tmp = fast_timer_list; + }); + + t->delay_us = delay_us; + t->function = function; + t->data = data; + t->name = name; + + t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000; + t->tv_expires.tv_sec = t->tv_set.tv_sec + delay_us / 1000000; + if (t->tv_expires.tv_usec > 1000000) + { + t->tv_expires.tv_usec -= 1000000; + t->tv_expires.tv_sec++; + } +#ifdef FAST_TIMER_LOG + timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t; +#endif + fast_timers_added++; + + /* Check if this should timeout before anything else */ + if (tmp == NULL || timeval_cmp(&t->tv_expires, &tmp->tv_expires) < 0) + { + /* Put first in list and modify the timer value */ + t->prev = NULL; + t->next = fast_timer_list; + if (fast_timer_list) + { + fast_timer_list->prev = t; + } + fast_timer_list = t; +#ifdef FAST_TIMER_LOG + timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t; +#endif + start_timer_trig(delay_us); + } else { + /* Put in correct place in list */ + while (tmp->next && + timeval_cmp(&t->tv_expires, &tmp->next->tv_expires) > 0) + { + tmp = tmp->next; + } + /* Insert t after tmp */ + t->prev = tmp; + t->next = tmp->next; + if (tmp->next) + { + tmp->next->prev = t; + } + tmp->next = t; + } + + D2(printk("start_one_shot_timer: %d us done\n", delay_us)); + + local_irq_restore(flags); +} /* start_one_shot_timer */ + +static inline int fast_timer_pending (const struct fast_timer * t) +{ + return (t->next != NULL) || (t->prev != NULL) || (t == fast_timer_list); +} + +static inline int detach_fast_timer (struct fast_timer *t) +{ + struct fast_timer *next, *prev; + if (!fast_timer_pending(t)) + return 0; + next = t->next; + prev = t->prev; + if (next) + next->prev = prev; + if (prev) + prev->next = next; + else + fast_timer_list = next; + fast_timers_deleted++; + return 1; +} + +int del_fast_timer(struct fast_timer * t) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + ret = detach_fast_timer(t); + t->next = t->prev = NULL; + local_irq_restore(flags); + return ret; +} /* del_fast_timer */ + + +/* Interrupt routines or functions called in interrupt context */ + +/* Timer interrupt handler for trig interrupts */ + +static irqreturn_t +timer_trig_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + reg_timer_r_masked_intr masked_intr; + + /* Check if the timer interrupt is for us (a trig int) */ + masked_intr = REG_RD(timer, regi_timer, r_masked_intr); + if (!masked_intr.trig) + return IRQ_NONE; + timer_trig_handler(); + return IRQ_HANDLED; +} + +static void timer_trig_handler(void) +{ + reg_timer_rw_ack_intr ack_intr = { 0 }; + reg_timer_rw_intr_mask intr_mask; + reg_timer_rw_trig_cfg trig_cfg = { 0 }; + struct fast_timer *t; + unsigned long flags; + + local_irq_save(flags); + + /* Clear timer trig interrupt */ + intr_mask = REG_RD(timer, regi_timer, rw_intr_mask); + intr_mask.trig = 0; + REG_WR(timer, regi_timer, rw_intr_mask, intr_mask); + + /* First stop timer, then ack interrupt */ + /* Stop timer */ + trig_cfg.tmr = regk_timer_off; + REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg); + + /* Ack interrupt */ + ack_intr.trig = 1; + REG_WR(timer, regi_timer, rw_ack_intr, ack_intr); + + fast_timer_running = 0; + fast_timer_ints++; + + local_irq_restore(flags); + + t = fast_timer_list; + while (t) + { + struct timeval tv; + + /* Has it really expired? */ + do_gettimeofday_fast(&tv); + D1(printk("t: %is %06ius\n", tv.tv_sec, tv.tv_usec)); + + if (timeval_cmp(&t->tv_expires, &tv) <= 0) + { + /* Yes it has expired */ +#ifdef FAST_TIMER_LOG + timer_expired_log[fast_timers_expired % NUM_TIMER_STATS] = *t; +#endif + fast_timers_expired++; + + /* Remove this timer before call, since it may reuse the timer */ + local_irq_save(flags); + if (t->prev) + { + t->prev->next = t->next; + } + else + { + fast_timer_list = t->next; + } + if (t->next) + { + t->next->prev = t->prev; + } + t->prev = NULL; + t->next = NULL; + local_irq_restore(flags); + + if (t->function != NULL) + { + t->function(t->data); + } + else + { + DEBUG_LOG("!trimertrig %i function==NULL!\n", fast_timer_ints); + } + } + else + { + /* Timer is to early, let's set it again using the normal routines */ + D1(printk(".\n")); + } + + local_irq_save(flags); + if ((t = fast_timer_list) != NULL) + { + /* Start next timer.. */ + long us; + struct timeval tv; + + do_gettimeofday_fast(&tv); + us = ((t->tv_expires.tv_sec - tv.tv_sec) * 1000000 + + t->tv_expires.tv_usec - tv.tv_usec); + if (us > 0) + { + if (!fast_timer_running) + { +#ifdef FAST_TIMER_LOG + timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t; +#endif + start_timer_trig(us); + } + local_irq_restore(flags); + break; + } + else + { + /* Timer already expired, let's handle it better late than never. + * The normal loop handles it + */ + D1(printk("e! %d\n", us)); + } + } + local_irq_restore(flags); + } + + if (!t) + { + D1(printk("ttrig stop!\n")); + } +} + +static void wake_up_func(unsigned long data) +{ +#ifdef DECLARE_WAITQUEUE + wait_queue_head_t *sleep_wait_p = (wait_queue_head_t*)data; +#else + struct wait_queue **sleep_wait_p = (struct wait_queue **)data; +#endif + wake_up(sleep_wait_p); +} + + +/* Useful API */ + +void schedule_usleep(unsigned long us) +{ + struct fast_timer t; +#ifdef DECLARE_WAITQUEUE + wait_queue_head_t sleep_wait; + init_waitqueue_head(&sleep_wait); + { + DECLARE_WAITQUEUE(wait, current); +#else + struct wait_queue *sleep_wait = NULL; + struct wait_queue wait = { current, NULL }; +#endif + + D1(printk("schedule_usleep(%d)\n", us)); + add_wait_queue(&sleep_wait, &wait); + set_current_state(TASK_INTERRUPTIBLE); + start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us, + "usleep"); + schedule(); + set_current_state(TASK_RUNNING); + remove_wait_queue(&sleep_wait, &wait); + D1(printk("done schedule_usleep(%d)\n", us)); +#ifdef DECLARE_WAITQUEUE + } +#endif +} + +#ifdef CONFIG_PROC_FS +static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0) + ,int *eof, void *data_unused +#else + ,int unused +#endif + ); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0) +static struct proc_dir_entry *fasttimer_proc_entry; +#else +static struct proc_dir_entry fasttimer_proc_entry = +{ + 0, 9, "fasttimer", + S_IFREG | S_IRUGO, 1, 0, 0, + 0, NULL /* ops -- default to array */, + &proc_fasttimer_read /* get_info */, +}; +#endif +#endif /* CONFIG_PROC_FS */ + +#ifdef CONFIG_PROC_FS + +/* This value is very much based on testing */ +#define BIG_BUF_SIZE (500 + NUM_TIMER_STATS * 300) + +static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0) + ,int *eof, void *data_unused +#else + ,int unused +#endif + ) +{ + unsigned long flags; + int i = 0; + int num_to_show; + struct timeval tv; + struct fast_timer *t, *nextt; + static char *bigbuf = NULL; + static unsigned long used; + + if (!bigbuf && !(bigbuf = vmalloc(BIG_BUF_SIZE))) + { + used = 0; + bigbuf[0] = '\0'; + return 0; + } + + if (!offset || !used) + { + do_gettimeofday_fast(&tv); + + used = 0; + used += sprintf(bigbuf + used, "Fast timers added: %i\n", + fast_timers_added); + used += sprintf(bigbuf + used, "Fast timers started: %i\n", + fast_timers_started); + used += sprintf(bigbuf + used, "Fast timer interrupts: %i\n", + fast_timer_ints); + used += sprintf(bigbuf + used, "Fast timers expired: %i\n", + fast_timers_expired); + used += sprintf(bigbuf + used, "Fast timers deleted: %i\n", + fast_timers_deleted); + used += sprintf(bigbuf + used, "Fast timer running: %s\n", + fast_timer_running ? "yes" : "no"); + used += sprintf(bigbuf + used, "Current time: %lu.%06lu\n", + (unsigned long)tv.tv_sec, + (unsigned long)tv.tv_usec); +#ifdef FAST_TIMER_SANITY_CHECKS + used += sprintf(bigbuf + used, "Sanity failed: %i\n", + sanity_failed); +#endif + used += sprintf(bigbuf + used, "\n"); + +#ifdef DEBUG_LOG_INCLUDED + { + int end_i = debug_log_cnt; + i = 0; + + if (debug_log_cnt_wrapped) + { + i = debug_log_cnt; + } + + while ((i != end_i || (debug_log_cnt_wrapped && !used)) && + used+100 < BIG_BUF_SIZE) + { + used += sprintf(bigbuf + used, debug_log_string[i], + debug_log_value[i]); + i = (i+1) % DEBUG_LOG_MAX; + } + } + used += sprintf(bigbuf + used, "\n"); +#endif + + num_to_show = (fast_timers_started < NUM_TIMER_STATS ? fast_timers_started: + NUM_TIMER_STATS); + used += sprintf(bigbuf + used, "Timers started: %i\n", fast_timers_started); + for (i = 0; i < num_to_show && (used+100 < BIG_BUF_SIZE) ; i++) + { + int cur = (fast_timers_started - i - 1) % NUM_TIMER_STATS; + +#if 1 //ndef FAST_TIMER_LOG + used += sprintf(bigbuf + used, "div: %i delay: %i" + "\n", + timer_div_settings[cur], + timer_delay_settings[cur] + ); +#endif +#ifdef FAST_TIMER_LOG + t = &timer_started_log[cur]; + used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu " + "d: %6li us data: 0x%08lX" + "\n", + t->name, + (unsigned long)t->tv_set.tv_sec, + (unsigned long)t->tv_set.tv_usec, + (unsigned long)t->tv_expires.tv_sec, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data + ); +#endif + } + used += sprintf(bigbuf + used, "\n"); + +#ifdef FAST_TIMER_LOG + num_to_show = (fast_timers_added < NUM_TIMER_STATS ? fast_timers_added: + NUM_TIMER_STATS); + used += sprintf(bigbuf + used, "Timers added: %i\n", fast_timers_added); + for (i = 0; i < num_to_show && (used+100 < BIG_BUF_SIZE); i++) + { + t = &timer_added_log[(fast_timers_added - i - 1) % NUM_TIMER_STATS]; + used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu " + "d: %6li us data: 0x%08lX" + "\n", + t->name, + (unsigned long)t->tv_set.tv_sec, + (unsigned long)t->tv_set.tv_usec, + (unsigned long)t->tv_expires.tv_sec, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data + ); + } + used += sprintf(bigbuf + used, "\n"); + + num_to_show = (fast_timers_expired < NUM_TIMER_STATS ? fast_timers_expired: + NUM_TIMER_STATS); + used += sprintf(bigbuf + used, "Timers expired: %i\n", fast_timers_expired); + for (i = 0; i < num_to_show && (used+100 < BIG_BUF_SIZE); i++) + { + t = &timer_expired_log[(fast_timers_expired - i - 1) % NUM_TIMER_STATS]; + used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu " + "d: %6li us data: 0x%08lX" + "\n", + t->name, + (unsigned long)t->tv_set.tv_sec, + (unsigned long)t->tv_set.tv_usec, + (unsigned long)t->tv_expires.tv_sec, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data + ); + } + used += sprintf(bigbuf + used, "\n"); +#endif + + used += sprintf(bigbuf + used, "Active timers:\n"); + local_irq_save(flags); + local_irq_save(flags); + t = fast_timer_list; + while (t != NULL && (used+100 < BIG_BUF_SIZE)) + { + nextt = t->next; + local_irq_restore(flags); + used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu " + "d: %6li us data: 0x%08lX" +/* " func: 0x%08lX" */ + "\n", + t->name, + (unsigned long)t->tv_set.tv_sec, + (unsigned long)t->tv_set.tv_usec, + (unsigned long)t->tv_expires.tv_sec, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data +/* , t->function */ + ); + local_irq_disable(); + if (t->next != nextt) + { + printk("timer removed!\n"); + } + t = nextt; + } + local_irq_restore(flags); + } + + if (used - offset < len) + { + len = used - offset; + } + + memcpy(buf, bigbuf + offset, len); + *start = buf; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0) + *eof = 1; +#endif + + return len; +} +#endif /* PROC_FS */ + +#ifdef FAST_TIMER_TEST +static volatile unsigned long i = 0; +static volatile int num_test_timeout = 0; +static struct fast_timer tr[10]; +static int exp_num[10]; + +static struct timeval tv_exp[100]; + +static void test_timeout(unsigned long data) +{ + do_gettimeofday_fast(&tv_exp[data]); + exp_num[data] = num_test_timeout; + + num_test_timeout++; +} + +static void test_timeout1(unsigned long data) +{ + do_gettimeofday_fast(&tv_exp[data]); + exp_num[data] = num_test_timeout; + if (data < 7) + { + start_one_shot_timer(&tr[i], test_timeout1, i, 1000, "timeout1"); + i++; + } + num_test_timeout++; +} + +DP( +static char buf0[2000]; +static char buf1[2000]; +static char buf2[2000]; +static char buf3[2000]; +static char buf4[2000]; +); + +static char buf5[6000]; +static int j_u[1000]; + +static void fast_timer_test(void) +{ + int prev_num; + int j; + + struct timeval tv, tv0, tv1, tv2; + + printk("fast_timer_test() start\n"); + do_gettimeofday_fast(&tv); + + for (j = 0; j < 1000; j++) + { + j_u[j] = GET_JIFFIES_USEC(); + } + for (j = 0; j < 100; j++) + { + do_gettimeofday_fast(&tv_exp[j]); + } + printk("fast_timer_test() %is %06i\n", tv.tv_sec, tv.tv_usec); + + for (j = 0; j < 1000; j++) + { + printk("%i %i %i %i %i\n",j_u[j], j_u[j+1], j_u[j+2], j_u[j+3], j_u[j+4]); + j += 4; + } + for (j = 0; j < 100; j++) + { + printk("%i.%i %i.%i %i.%i %i.%i %i.%i\n", + tv_exp[j].tv_sec,tv_exp[j].tv_usec, + tv_exp[j+1].tv_sec,tv_exp[j+1].tv_usec, + tv_exp[j+2].tv_sec,tv_exp[j+2].tv_usec, + tv_exp[j+3].tv_sec,tv_exp[j+3].tv_usec, + tv_exp[j+4].tv_sec,tv_exp[j+4].tv_usec); + j += 4; + } + do_gettimeofday_fast(&tv0); + start_one_shot_timer(&tr[i], test_timeout, i, 50000, "test0"); + DP(proc_fasttimer_read(buf0, NULL, 0, 0, 0)); + i++; + start_one_shot_timer(&tr[i], test_timeout, i, 70000, "test1"); + DP(proc_fasttimer_read(buf1, NULL, 0, 0, 0)); + i++; + start_one_shot_timer(&tr[i], test_timeout, i, 40000, "test2"); + DP(proc_fasttimer_read(buf2, NULL, 0, 0, 0)); + i++; + start_one_shot_timer(&tr[i], test_timeout, i, 60000, "test3"); + DP(proc_fasttimer_read(buf3, NULL, 0, 0, 0)); + i++; + start_one_shot_timer(&tr[i], test_timeout1, i, 55000, "test4xx"); + DP(proc_fasttimer_read(buf4, NULL, 0, 0, 0)); + i++; + do_gettimeofday_fast(&tv1); + + proc_fasttimer_read(buf5, NULL, 0, 0, 0); + + prev_num = num_test_timeout; + while (num_test_timeout < i) + { + if (num_test_timeout != prev_num) + { + prev_num = num_test_timeout; + } + } + do_gettimeofday_fast(&tv2); + printk("Timers started %is %06i\n", tv0.tv_sec, tv0.tv_usec); + printk("Timers started at %is %06i\n", tv1.tv_sec, tv1.tv_usec); + printk("Timers done %is %06i\n", tv2.tv_sec, tv2.tv_usec); + DP(printk("buf0:\n"); + printk(buf0); + printk("buf1:\n"); + printk(buf1); + printk("buf2:\n"); + printk(buf2); + printk("buf3:\n"); + printk(buf3); + printk("buf4:\n"); + printk(buf4); + ); + printk("buf5:\n"); + printk(buf5); + + printk("timers set:\n"); + for(j = 0; j<i; j++) + { + struct fast_timer *t = &tr[j]; + printk("%-10s set: %6is %06ius exp: %6is %06ius " + "data: 0x%08X func: 0x%08X\n", + t->name, + t->tv_set.tv_sec, + t->tv_set.tv_usec, + t->tv_expires.tv_sec, + t->tv_expires.tv_usec, + t->data, + t->function + ); + + printk(" del: %6ius did exp: %6is %06ius as #%i error: %6li\n", + t->delay_us, + tv_exp[j].tv_sec, + tv_exp[j].tv_usec, + exp_num[j], + (tv_exp[j].tv_sec - t->tv_expires.tv_sec)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec); + } + proc_fasttimer_read(buf5, NULL, 0, 0, 0); + printk("buf5 after all done:\n"); + printk(buf5); + printk("fast_timer_test() done\n"); +} +#endif + + +void fast_timer_init(void) +{ + /* For some reason, request_irq() hangs when called froom time_init() */ + if (!fast_timer_is_init) + { + printk("fast_timer_init()\n"); + +#ifdef CONFIG_PROC_FS +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0) + if ((fasttimer_proc_entry = create_proc_entry( "fasttimer", 0, 0 ))) + fasttimer_proc_entry->read_proc = proc_fasttimer_read; +#else + proc_register_dynamic(&proc_root, &fasttimer_proc_entry); +#endif +#endif /* PROC_FS */ + if(request_irq(TIMER_INTR_VECT, timer_trig_interrupt, SA_INTERRUPT, + "fast timer int", NULL)) + { + printk("err: timer1 irq\n"); + } + fast_timer_is_init = 1; +#ifdef FAST_TIMER_TEST + printk("do test\n"); + fast_timer_test(); +#endif + } +} diff --git a/arch/cris/arch-v32/kernel/head.S b/arch/cris/arch-v32/kernel/head.S new file mode 100644 index 000000000000..3cfe57dc391d --- /dev/null +++ b/arch/cris/arch-v32/kernel/head.S @@ -0,0 +1,448 @@ +/* + * CRISv32 kernel startup code. + * + * Copyright (C) 2003, Axis Communications AB + */ + +#include <linux/config.h> + +#define ASSEMBLER_MACROS_ONLY + +/* + * The macros found in mmu_defs_asm.h uses the ## concatenation operator, so + * -traditional must not be used when assembling this file. + */ +#include <asm/arch/hwregs/reg_rdwr.h> +#include <asm/arch/hwregs/asm/mmu_defs_asm.h> +#include <asm/arch/hwregs/asm/reg_map_asm.h> +#include <asm/arch/hwregs/asm/config_defs_asm.h> +#include <asm/arch/hwregs/asm/bif_core_defs_asm.h> + +#define CRAMFS_MAGIC 0x28cd3d45 +#define RAM_INIT_MAGIC 0x56902387 +#define COMMAND_LINE_MAGIC 0x87109563 + + ;; NOTE: R8 and R9 carry information from the decompressor (if the + ;; kernel was compressed). They must not be used in the code below + ;; until they are read! + + ;; Exported symbols. + .global etrax_irv + .global romfs_start + .global romfs_length + .global romfs_in_flash + .global swapper_pg_dir + .global crisv32_nand_boot + .global crisv32_nand_cramfs_offset + + ;; Dummy section to make it bootable with current VCS simulator +#ifdef CONFIG_ETRAXFS_SIM + .section ".boot", "ax" + ba tstart + nop +#endif + + .text +tstart: + ;; This is the entry point of the kernel. The CPU is currently in + ;; supervisor mode. + ;; + ;; 0x00000000 if flash. + ;; 0x40004000 if DRAM. + ;; + di + + ;; Start clocks for used blocks. + move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1 + move.d [$r1], $r0 + or.d REG_STATE(config, rw_clk_ctrl, cpu, yes) | \ + REG_STATE(config, rw_clk_ctrl, bif, yes) | \ + REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0 + move.d $r0, [$r1] + + ;; Set up waitstates etc + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r0 + move.d CONFIG_ETRAX_MEM_GRP1_CONFIG, $r1 + move.d $r1, [$r0] + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg), $r0 + move.d CONFIG_ETRAX_MEM_GRP2_CONFIG, $r1 + move.d $r1, [$r0] + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r0 + move.d CONFIG_ETRAX_MEM_GRP3_CONFIG, $r1 + move.d $r1, [$r0] + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg), $r0 + move.d CONFIG_ETRAX_MEM_GRP4_CONFIG, $r1 + move.d $r1, [$r0] + +#ifdef CONFIG_ETRAXFS_SIM + ;; Set up minimal flash waitstates + move.d 0, $r10 + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r11 + move.d $r10, [$r11] +#endif + + ;; Setup and enable the MMU. Use same configuration for both the data + ;; and the instruction MMU. + ;; + ;; Note; 3 cycles is needed for a bank-select to take effect. Further; + ;; bank 1 is the instruction MMU, bank 2 is the data MMU. +#ifndef CONFIG_ETRAXFS_SIM + move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \ + | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4) \ + | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0 +#else + ;; Map the virtual DRAM to the RW eprom area at address 0. + ;; Also map 0xa for the hook calls, + move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \ + | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0) \ + | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) \ + | REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa), $r0 +#endif + + ;; Temporary map of 0x40 -> 0x40 and 0x00 -> 0x00. + move.d REG_FIELD(mmu, rw_mm_kbase_lo, base_4, 4) \ + | REG_FIELD(mmu, rw_mm_kbase_lo, base_0, 0), $r1 + + ;; Enable certain page protections and setup linear mapping + ;; for f,e,c,b,4,0. +#ifndef CONFIG_ETRAXFS_SIM + move.d REG_STATE(mmu, rw_mm_cfg, we, on) \ + | REG_STATE(mmu, rw_mm_cfg, acc, on) \ + | REG_STATE(mmu, rw_mm_cfg, ex, on) \ + | REG_STATE(mmu, rw_mm_cfg, inv, on) \ + | REG_STATE(mmu, rw_mm_cfg, seg_f, linear) \ + | REG_STATE(mmu, rw_mm_cfg, seg_e, linear) \ + | REG_STATE(mmu, rw_mm_cfg, seg_d, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_c, linear) \ + | REG_STATE(mmu, rw_mm_cfg, seg_b, linear) \ + | REG_STATE(mmu, rw_mm_cfg, seg_a, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_9, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_8, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_7, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_6, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_5, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_4, linear) \ + | REG_STATE(mmu, rw_mm_cfg, seg_3, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_2, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_1, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2 +#else + move.d REG_STATE(mmu, rw_mm_cfg, we, on) \ + | REG_STATE(mmu, rw_mm_cfg, acc, on) \ + | REG_STATE(mmu, rw_mm_cfg, ex, on) \ + | REG_STATE(mmu, rw_mm_cfg, inv, on) \ + | REG_STATE(mmu, rw_mm_cfg, seg_f, linear) \ + | REG_STATE(mmu, rw_mm_cfg, seg_e, linear) \ + | REG_STATE(mmu, rw_mm_cfg, seg_d, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_c, linear) \ + | REG_STATE(mmu, rw_mm_cfg, seg_b, linear) \ + | REG_STATE(mmu, rw_mm_cfg, seg_a, linear) \ + | REG_STATE(mmu, rw_mm_cfg, seg_9, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_8, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_7, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_6, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_5, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_4, linear) \ + | REG_STATE(mmu, rw_mm_cfg, seg_3, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_2, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_1, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2 +#endif + + ;; Update instruction MMU. + move 1, $srs + nop + nop + nop + move $r0, $s2 ; kbase_hi. + move $r1, $s1 ; kbase_lo. + move $r2, $s0 ; mm_cfg, virtual memory configuration. + + ;; Update data MMU. + move 2, $srs + nop + nop + nop + move $r0, $s2 ; kbase_hi. + move $r1, $s1 ; kbase_lo + move $r2, $s0 ; mm_cfg, virtual memory configuration. + + ;; Enable data and instruction MMU. + move 0, $srs + moveq 0xf, $r0 ; IMMU, DMMU, DCache, Icache on + nop + nop + nop + move $r0, $s0 + nop + nop + nop + +#ifdef CONFIG_SMP + ;; Read CPU ID + move 0, $srs + nop + nop + nop + move $s10, $r0 + cmpq 0, $r0 + beq master_cpu + nop +slave_cpu: + ; A slave waits for cpu_now_booting to be equal to CPU ID. + move.d cpu_now_booting, $r1 +slave_wait: + cmp.d [$r1], $r0 + bne slave_wait + nop + ; Time to boot-up. Get stack location provided by master CPU. + move.d smp_init_current_idle_thread, $r1 + move.d [$r1], $sp + add.d 8192, $sp + move.d ebp_start, $r0 ; Defined in linker-script. + move $r0, $ebp + jsr smp_callin + nop +master_cpu: +#endif +#ifndef CONFIG_ETRAXFS_SIM + ;; Check if starting from DRAM or flash. + lapcq ., $r0 + and.d 0x7fffffff, $r0 ; Mask off the non-cache bit. + cmp.d 0x10000, $r0 ; Arbitrary, something above this code. + blo _inflash0 + nop +#endif + + jump _inram ; Jump to cached RAM. + nop + + ;; Jumpgate. +_inflash0: + jump _inflash + nop + + ;; Put the following in a section so that storage for it can be + ;; reclaimed after init is finished. + .section ".init.text", "ax" + +_inflash: + + ;; Initialize DRAM. + cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized? + beq _dram_initialized + nop + +#include "../lib/dram_init.S" + +_dram_initialized: + ;; Copy the text and data section to DRAM. This depends on that the + ;; variables used below are correctly set up by the linker script. + ;; The calculated value stored in R4 is used below. + moveq 0, $r0 ; Source. + move.d text_start, $r1 ; Destination. + move.d __vmlinux_end, $r2 + move.d $r2, $r4 + sub.d $r1, $r4 +1: move.w [$r0+], $r3 + move.w $r3, [$r1+] + cmp.d $r2, $r1 + blo 1b + nop + + ;; Keep CRAMFS in flash. + moveq 0, $r0 + move.d romfs_length, $r1 + move.d $r0, [$r1] + move.d [$r4], $r0 ; cramfs_super.magic + cmp.d CRAMFS_MAGIC, $r0 + bne 1f + nop + + addoq +4, $r4, $acr + move.d [$acr], $r0 + move.d romfs_length, $r1 + move.d $r0, [$r1] + add.d 0xf0000000, $r4 ; Add cached flash start in virtual memory. + move.d romfs_start, $r1 + move.d $r4, [$r1] +1: moveq 1, $r0 + move.d romfs_in_flash, $r1 + move.d $r0, [$r1] + + jump _start_it ; Jump to cached code. + nop + +_inram: + ;; Check if booting from NAND flash (in that case we just remember the offset + ;; into the flash where cramfs should be). + move.d REG_ADDR(config, regi_config, r_bootsel), $r0 + move.d [$r0], $r0 + and.d REG_MASK(config, r_bootsel, boot_mode), $r0 + cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 + bne move_cramfs + moveq 1,$r0 + move.d crisv32_nand_boot, $r1 + move.d $r0, [$r1] + move.d crisv32_nand_cramfs_offset, $r1 + move.d $r9, [$r1] + moveq 1, $r0 + move.d romfs_in_flash, $r1 + move.d $r0, [$r1] + jump _start_it + nop + +move_cramfs: + ;; Move the cramfs after BSS. + moveq 0, $r0 + move.d romfs_length, $r1 + move.d $r0, [$r1] + +#ifndef CONFIG_ETRAXFS_SIM + ;; The kernel could have been unpacked to DRAM by the loader, but + ;; the cramfs image could still be inte the flash immediately + ;; following the compressed kernel image. The loaded passes the address + ;; of the bute succeeding the last compressed byte in the flash in + ;; register R9 when starting the kernel. + cmp.d 0x0ffffff8, $r9 + bhs _no_romfs_in_flash ; R9 points outside the flash area. + nop +#else + ba _no_romfs_in_flash + nop +#endif + move.d [$r9], $r0 ; cramfs_super.magic + cmp.d CRAMFS_MAGIC, $r0 + bne _no_romfs_in_flash + nop + + addoq +4, $r9, $acr + move.d [$acr], $r0 + move.d romfs_length, $r1 + move.d $r0, [$r1] + add.d 0xf0000000, $r9 ; Add cached flash start in virtual memory. + move.d romfs_start, $r1 + move.d $r9, [$r1] + moveq 1, $r0 + move.d romfs_in_flash, $r1 + move.d $r0, [$r1] + + jump _start_it ; Jump to cached code. + nop + +_no_romfs_in_flash: + ;; Look for cramfs. +#ifndef CONFIG_ETRAXFS_SIM + move.d __vmlinux_end, $r0 +#else + move.d __end, $r0 +#endif + move.d [$r0], $r1 + cmp.d CRAMFS_MAGIC, $r1 + bne 2f + nop + + addoq +4, $r0, $acr + move.d [$acr], $r2 + move.d _end, $r1 + move.d romfs_start, $r3 + move.d $r1, [$r3] + move.d romfs_length, $r3 + move.d $r2, [$r3] + +#ifndef CONFIG_ETRAXFS_SIM + add.d $r2, $r0 + add.d $r2, $r1 + + lsrq 1, $r2 ; Size is in bytes, we copy words. + addq 1, $r2 +1: + move.w [$r0], $r3 + move.w $r3, [$r1] + subq 2, $r0 + subq 2, $r1 + subq 1, $r2 + bne 1b + nop +#endif + +2: + moveq 0, $r0 + move.d romfs_in_flash, $r1 + move.d $r0, [$r1] + + jump _start_it ; Jump to cached code. + nop + +_start_it: + + ;; Check if kernel command line is supplied + cmp.d COMMAND_LINE_MAGIC, $r10 + bne no_command_line + nop + + move.d 256, $r13 + move.d cris_command_line, $r10 + or.d 0x80000000, $r11 ; Make it virtual +1: + move.b [$r11+], $r12 + move.b $r12, [$r10+] + subq 1, $r13 + bne 1b + nop + +no_command_line: + + ;; The kernel stack contains a task structure for each task. This + ;; the initial kernel stack is in the same page as the init_task, + ;; but starts at the top of the page, i.e. + 8192 bytes. + move.d init_thread_union + 8192, $sp + move.d ebp_start, $r0 ; Defined in linker-script. + move $r0, $ebp + move.d etrax_irv, $r1 ; Set the exception base register and pointer. + move.d $r0, [$r1] + +#ifndef CONFIG_ETRAXFS_SIM + ;; Clear the BSS region from _bss_start to _end. + move.d __bss_start, $r0 + move.d _end, $r1 +1: clear.d [$r0+] + cmp.d $r1, $r0 + blo 1b + nop +#endif + +#ifdef CONFIG_ETRAXFS_SIM + /* Set the watchdog timeout to something big. Will be removed when */ + /* watchdog can be disabled with command line option */ + move.d 0x7fffffff, $r10 + jsr CPU_WATCHDOG_TIMEOUT + nop +#endif + + ; Initialize registers to increase determinism + move.d __bss_start, $r0 + movem [$r0], $r13 + + jump start_kernel ; Jump to start_kernel() in init/main.c. + nop + + .data +etrax_irv: + .dword 0 +romfs_start: + .dword 0 +romfs_length: + .dword 0 +romfs_in_flash: + .dword 0 +crisv32_nand_boot: + .dword 0 +crisv32_nand_cramfs_offset: + .dword 0 + +swapper_pg_dir = 0xc0002000 + + .section ".init.data", "aw" + +#include "../lib/hw_settings.S" diff --git a/arch/cris/arch-v32/kernel/io.c b/arch/cris/arch-v32/kernel/io.c new file mode 100644 index 000000000000..6bc9f263c3d6 --- /dev/null +++ b/arch/cris/arch-v32/kernel/io.c @@ -0,0 +1,154 @@ +/* + * Helper functions for I/O pins. + * + * Copyright (c) 2004 Axis Communications AB. + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <asm/io.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/hwregs/gio_defs.h> + +struct crisv32_ioport crisv32_ioports[] = +{ + { + (unsigned long*)REG_ADDR(gio, regi_gio, rw_pa_oe), + (unsigned long*)REG_ADDR(gio, regi_gio, rw_pa_dout), + (unsigned long*)REG_ADDR(gio, regi_gio, r_pa_din), + 8 + }, + { + (unsigned long*)REG_ADDR(gio, regi_gio, rw_pb_oe), + (unsigned long*)REG_ADDR(gio, regi_gio, rw_pb_dout), + (unsigned long*)REG_ADDR(gio, regi_gio, r_pb_din), + 18 + }, + { + (unsigned long*)REG_ADDR(gio, regi_gio, rw_pc_oe), + (unsigned long*)REG_ADDR(gio, regi_gio, rw_pc_dout), + (unsigned long*)REG_ADDR(gio, regi_gio, r_pc_din), + 18 + }, + { + (unsigned long*)REG_ADDR(gio, regi_gio, rw_pd_oe), + (unsigned long*)REG_ADDR(gio, regi_gio, rw_pd_dout), + (unsigned long*)REG_ADDR(gio, regi_gio, r_pd_din), + 18 + }, + { + (unsigned long*)REG_ADDR(gio, regi_gio, rw_pe_oe), + (unsigned long*)REG_ADDR(gio, regi_gio, rw_pe_dout), + (unsigned long*)REG_ADDR(gio, regi_gio, r_pe_din), + 18 + } +}; + +#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport) + +struct crisv32_iopin crisv32_led1_green; +struct crisv32_iopin crisv32_led1_red; +struct crisv32_iopin crisv32_led2_green; +struct crisv32_iopin crisv32_led2_red; +struct crisv32_iopin crisv32_led3_green; +struct crisv32_iopin crisv32_led3_red; + +/* Dummy port used when green LED and red LED is on the same bit */ +static unsigned long io_dummy; +static struct crisv32_ioport dummy_port = +{ + &io_dummy, + &io_dummy, + &io_dummy, + 18 +}; +static struct crisv32_iopin dummy_led = +{ + &dummy_port, + 0 +}; + +static int __init crisv32_io_init(void) +{ + int ret = 0; + /* Initialize LEDs */ + ret += crisv32_io_get_name(&crisv32_led1_green, CONFIG_ETRAX_LED1G); + ret += crisv32_io_get_name(&crisv32_led1_red, CONFIG_ETRAX_LED1R); + ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_LED2G); + ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_LED2R); + ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_LED3G); + ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_LED3R); + crisv32_io_set_dir(&crisv32_led1_green, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led1_red, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out); + + if (!strcmp(CONFIG_ETRAX_LED1G, CONFIG_ETRAX_LED1R)) + crisv32_led1_red = dummy_led; + if (!strcmp(CONFIG_ETRAX_LED2G, CONFIG_ETRAX_LED2R)) + crisv32_led2_red = dummy_led; + + return ret; +} + +__initcall(crisv32_io_init); + +int crisv32_io_get(struct crisv32_iopin* iopin, + unsigned int port, unsigned int pin) +{ + if (port > NBR_OF_PORTS) + return -EINVAL; + if (port > crisv32_ioports[port].pin_count) + return -EINVAL; + + iopin->bit = 1 << pin; + iopin->port = &crisv32_ioports[port]; + + if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) + return -EIO; + + return 0; +} + +int crisv32_io_get_name(struct crisv32_iopin* iopin, + char* name) +{ + int port; + int pin; + + if (toupper(*name) == 'P') + name++; + + if (toupper(*name) < 'A' || toupper(*name) > 'E') + return -EINVAL; + + port = toupper(*name) - 'A'; + name++; + pin = simple_strtoul(name, NULL, 10); + + if (pin < 0 || pin > crisv32_ioports[port].pin_count) + return -EINVAL; + + iopin->bit = 1 << pin; + iopin->port = &crisv32_ioports[port]; + + if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) + return -EIO; + + return 0; +} + +#ifdef CONFIG_PCI +/* PCI I/O access stuff */ +struct cris_io_operations* cris_iops = NULL; +EXPORT_SYMBOL(cris_iops); +#endif + diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c new file mode 100644 index 000000000000..c78cc2685133 --- /dev/null +++ b/arch/cris/arch-v32/kernel/irq.c @@ -0,0 +1,413 @@ +/* + * Copyright (C) 2003, Axis Communications AB. + */ + +#include <asm/irq.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/smp.h> +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/profile.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/threads.h> +#include <linux/spinlock.h> +#include <linux/kernel_stat.h> +#include <asm/arch/hwregs/reg_map.h> +#include <asm/arch/hwregs/reg_rdwr.h> +#include <asm/arch/hwregs/intr_vect.h> +#include <asm/arch/hwregs/intr_vect_defs.h> + +#define CPU_FIXED -1 + +/* IRQ masks (refer to comment for crisv32_do_multiple) */ +#define TIMER_MASK (1 << (TIMER_INTR_VECT - FIRST_IRQ)) +#ifdef CONFIG_ETRAX_KGDB +#if defined(CONFIG_ETRAX_KGDB_PORT0) +#define IGNOREMASK (1 << (SER0_INTR_VECT - FIRST_IRQ)) +#elif defined(CONFIG_ETRAX_KGDB_PORT1) +#define IGNOREMASK (1 << (SER1_INTR_VECT - FIRST_IRQ)) +#elif defined(CONFIG_ETRAX_KGB_PORT2) +#define IGNOREMASK (1 << (SER2_INTR_VECT - FIRST_IRQ)) +#elif defined(CONFIG_ETRAX_KGDB_PORT3) +#define IGNOREMASK (1 << (SER3_INTR_VECT - FIRST_IRQ)) +#endif +#endif + +DEFINE_SPINLOCK(irq_lock); + +struct cris_irq_allocation +{ + int cpu; /* The CPU to which the IRQ is currently allocated. */ + cpumask_t mask; /* The CPUs to which the IRQ may be allocated. */ +}; + +struct cris_irq_allocation irq_allocations[NR_IRQS] = + {[0 ... NR_IRQS - 1] = {0, CPU_MASK_ALL}}; + +static unsigned long irq_regs[NR_CPUS] = +{ + regi_irq, +#ifdef CONFIG_SMP + regi_irq2, +#endif +}; + +unsigned long cpu_irq_counters[NR_CPUS]; +unsigned long irq_counters[NR_REAL_IRQS]; + +/* From irq.c. */ +extern void weird_irq(void); + +/* From entry.S. */ +extern void system_call(void); +extern void nmi_interrupt(void); +extern void multiple_interrupt(void); +extern void gdb_handle_exception(void); +extern void i_mmu_refill(void); +extern void i_mmu_invalid(void); +extern void i_mmu_access(void); +extern void i_mmu_execute(void); +extern void d_mmu_refill(void); +extern void d_mmu_invalid(void); +extern void d_mmu_access(void); +extern void d_mmu_write(void); + +/* From kgdb.c. */ +extern void kgdb_init(void); +extern void breakpoint(void); + +/* + * Build the IRQ handler stubs using macros from irq.h. First argument is the + * IRQ number, the second argument is the corresponding bit in + * intr_rw_vect_mask found in asm/arch/hwregs/intr_vect_defs.h. + */ +BUILD_IRQ(0x31, (1 << 0)) /* memarb */ +BUILD_IRQ(0x32, (1 << 1)) /* gen_io */ +BUILD_IRQ(0x33, (1 << 2)) /* iop0 */ +BUILD_IRQ(0x34, (1 << 3)) /* iop1 */ +BUILD_IRQ(0x35, (1 << 4)) /* iop2 */ +BUILD_IRQ(0x36, (1 << 5)) /* iop3 */ +BUILD_IRQ(0x37, (1 << 6)) /* dma0 */ +BUILD_IRQ(0x38, (1 << 7)) /* dma1 */ +BUILD_IRQ(0x39, (1 << 8)) /* dma2 */ +BUILD_IRQ(0x3a, (1 << 9)) /* dma3 */ +BUILD_IRQ(0x3b, (1 << 10)) /* dma4 */ +BUILD_IRQ(0x3c, (1 << 11)) /* dma5 */ +BUILD_IRQ(0x3d, (1 << 12)) /* dma6 */ +BUILD_IRQ(0x3e, (1 << 13)) /* dma7 */ +BUILD_IRQ(0x3f, (1 << 14)) /* dma8 */ +BUILD_IRQ(0x40, (1 << 15)) /* dma9 */ +BUILD_IRQ(0x41, (1 << 16)) /* ata */ +BUILD_IRQ(0x42, (1 << 17)) /* sser0 */ +BUILD_IRQ(0x43, (1 << 18)) /* sser1 */ +BUILD_IRQ(0x44, (1 << 19)) /* ser0 */ +BUILD_IRQ(0x45, (1 << 20)) /* ser1 */ +BUILD_IRQ(0x46, (1 << 21)) /* ser2 */ +BUILD_IRQ(0x47, (1 << 22)) /* ser3 */ +BUILD_IRQ(0x48, (1 << 23)) +BUILD_IRQ(0x49, (1 << 24)) /* eth0 */ +BUILD_IRQ(0x4a, (1 << 25)) /* eth1 */ +BUILD_TIMER_IRQ(0x4b, (1 << 26))/* timer */ +BUILD_IRQ(0x4c, (1 << 27)) /* bif_arb */ +BUILD_IRQ(0x4d, (1 << 28)) /* bif_dma */ +BUILD_IRQ(0x4e, (1 << 29)) /* ext */ +BUILD_IRQ(0x4f, (1 << 29)) /* ipi */ + +/* Pointers to the low-level handlers. */ +static void (*interrupt[NR_IRQS])(void) = { + IRQ0x31_interrupt, IRQ0x32_interrupt, IRQ0x33_interrupt, + IRQ0x34_interrupt, IRQ0x35_interrupt, IRQ0x36_interrupt, + IRQ0x37_interrupt, IRQ0x38_interrupt, IRQ0x39_interrupt, + IRQ0x3a_interrupt, IRQ0x3b_interrupt, IRQ0x3c_interrupt, + IRQ0x3d_interrupt, IRQ0x3e_interrupt, IRQ0x3f_interrupt, + IRQ0x40_interrupt, IRQ0x41_interrupt, IRQ0x42_interrupt, + IRQ0x43_interrupt, IRQ0x44_interrupt, IRQ0x45_interrupt, + IRQ0x46_interrupt, IRQ0x47_interrupt, IRQ0x48_interrupt, + IRQ0x49_interrupt, IRQ0x4a_interrupt, IRQ0x4b_interrupt, + IRQ0x4c_interrupt, IRQ0x4d_interrupt, IRQ0x4e_interrupt, + IRQ0x4f_interrupt +}; + +void +block_irq(int irq, int cpu) +{ + int intr_mask; + unsigned long flags; + + spin_lock_irqsave(&irq_lock, flags); + intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); + + /* Remember; 1 let thru, 0 block. */ + intr_mask &= ~(1 << (irq - FIRST_IRQ)); + + REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask); + spin_unlock_irqrestore(&irq_lock, flags); +} + +void +unblock_irq(int irq, int cpu) +{ + int intr_mask; + unsigned long flags; + + spin_lock_irqsave(&irq_lock, flags); + intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); + + /* Remember; 1 let thru, 0 block. */ + intr_mask |= (1 << (irq - FIRST_IRQ)); + + REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask); + spin_unlock_irqrestore(&irq_lock, flags); +} + +/* Find out which CPU the irq should be allocated to. */ +static int irq_cpu(int irq) +{ + int cpu; + unsigned long flags; + + spin_lock_irqsave(&irq_lock, flags); + cpu = irq_allocations[irq - FIRST_IRQ].cpu; + + /* Fixed interrupts stay on the local CPU. */ + if (cpu == CPU_FIXED) + { + spin_unlock_irqrestore(&irq_lock, flags); + return smp_processor_id(); + } + + + /* Let the interrupt stay if possible */ + if (cpu_isset(cpu, irq_allocations[irq - FIRST_IRQ].mask)) + goto out; + + /* IRQ must be moved to another CPU. */ + cpu = first_cpu(irq_allocations[irq - FIRST_IRQ].mask); + irq_allocations[irq - FIRST_IRQ].cpu = cpu; +out: + spin_unlock_irqrestore(&irq_lock, flags); + return cpu; +} + +void +mask_irq(int irq) +{ + int cpu; + + for (cpu = 0; cpu < NR_CPUS; cpu++) + block_irq(irq, cpu); +} + +void +unmask_irq(int irq) +{ + unblock_irq(irq, irq_cpu(irq)); +} + + +static unsigned int startup_crisv32_irq(unsigned int irq) +{ + unmask_irq(irq); + return 0; +} + +static void shutdown_crisv32_irq(unsigned int irq) +{ + mask_irq(irq); +} + +static void enable_crisv32_irq(unsigned int irq) +{ + unmask_irq(irq); +} + +static void disable_crisv32_irq(unsigned int irq) +{ + mask_irq(irq); +} + +static void ack_crisv32_irq(unsigned int irq) +{ +} + +static void end_crisv32_irq(unsigned int irq) +{ +} + +void set_affinity_crisv32_irq(unsigned int irq, cpumask_t dest) +{ + unsigned long flags; + spin_lock_irqsave(&irq_lock, flags); + irq_allocations[irq - FIRST_IRQ].mask = dest; + spin_unlock_irqrestore(&irq_lock, flags); +} + +static struct hw_interrupt_type crisv32_irq_type = { + .typename = "CRISv32", + .startup = startup_crisv32_irq, + .shutdown = shutdown_crisv32_irq, + .enable = enable_crisv32_irq, + .disable = disable_crisv32_irq, + .ack = ack_crisv32_irq, + .end = end_crisv32_irq, + .set_affinity = set_affinity_crisv32_irq +}; + +void +set_exception_vector(int n, irqvectptr addr) +{ + etrax_irv->v[n] = (irqvectptr) addr; +} + +extern void do_IRQ(int irq, struct pt_regs * regs); + +void +crisv32_do_IRQ(int irq, int block, struct pt_regs* regs) +{ + /* Interrupts that may not be moved to another CPU and + * are SA_INTERRUPT may skip blocking. This is currently + * only valid for the timer IRQ and the IPI and is used + * for the timer interrupt to avoid watchdog starvation. + */ + if (!block) { + do_IRQ(irq, regs); + return; + } + + block_irq(irq, smp_processor_id()); + do_IRQ(irq, regs); + + unblock_irq(irq, irq_cpu(irq)); +} + +/* If multiple interrupts occur simultaneously we get a multiple + * interrupt from the CPU and software has to sort out which + * interrupts that happened. There are two special cases here: + * + * 1. Timer interrupts may never be blocked because of the + * watchdog (refer to comment in include/asr/arch/irq.h) + * 2. GDB serial port IRQs are unhandled here and will be handled + * as a single IRQ when it strikes again because the GDB + * stubb wants to save the registers in its own fashion. + */ +void +crisv32_do_multiple(struct pt_regs* regs) +{ + int cpu; + int mask; + int masked; + int bit; + + cpu = smp_processor_id(); + + /* An extra irq_enter here to prevent softIRQs to run after + * each do_IRQ. This will decrease the interrupt latency. + */ + irq_enter(); + + /* Get which IRQs that happend. */ + masked = REG_RD_INT(intr_vect, irq_regs[cpu], r_masked_vect); + + /* Calculate new IRQ mask with these IRQs disabled. */ + mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); + mask &= ~masked; + + /* Timer IRQ is never masked */ + if (masked & TIMER_MASK) + mask |= TIMER_MASK; + + /* Block all the IRQs */ + REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, mask); + + /* Check for timer IRQ and handle it special. */ + if (masked & TIMER_MASK) { + masked &= ~TIMER_MASK; + do_IRQ(TIMER_INTR_VECT, regs); + } + +#ifdef IGNORE_MASK + /* Remove IRQs that can't be handled as multiple. */ + masked &= ~IGNORE_MASK; +#endif + + /* Handle the rest of the IRQs. */ + for (bit = 0; bit < 32; bit++) + { + if (masked & (1 << bit)) + do_IRQ(bit + FIRST_IRQ, regs); + } + + /* Unblock all the IRQs. */ + mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); + mask |= masked; + REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, mask); + + /* This irq_exit() will trigger the soft IRQs. */ + irq_exit(); +} + +/* + * This is called by start_kernel. It fixes the IRQ masks and setup the + * interrupt vector table to point to bad_interrupt pointers. + */ +void __init +init_IRQ(void) +{ + int i; + int j; + reg_intr_vect_rw_mask vect_mask = {0}; + + /* Clear all interrupts masks. */ + REG_WR(intr_vect, regi_irq, rw_mask, vect_mask); + + for (i = 0; i < 256; i++) + etrax_irv->v[i] = weird_irq; + + /* Point all IRQ's to bad handlers. */ + for (i = FIRST_IRQ, j = 0; j < NR_IRQS; i++, j++) { + irq_desc[j].handler = &crisv32_irq_type; + set_exception_vector(i, interrupt[j]); + } + + /* Mark Timer and IPI IRQs as CPU local */ + irq_allocations[TIMER_INTR_VECT - FIRST_IRQ].cpu = CPU_FIXED; + irq_desc[TIMER_INTR_VECT].status |= IRQ_PER_CPU; + irq_allocations[IPI_INTR_VECT - FIRST_IRQ].cpu = CPU_FIXED; + irq_desc[IPI_INTR_VECT].status |= IRQ_PER_CPU; + + set_exception_vector(0x00, nmi_interrupt); + set_exception_vector(0x30, multiple_interrupt); + + /* Set up handler for various MMU bus faults. */ + set_exception_vector(0x04, i_mmu_refill); + set_exception_vector(0x05, i_mmu_invalid); + set_exception_vector(0x06, i_mmu_access); + set_exception_vector(0x07, i_mmu_execute); + set_exception_vector(0x08, d_mmu_refill); + set_exception_vector(0x09, d_mmu_invalid); + set_exception_vector(0x0a, d_mmu_access); + set_exception_vector(0x0b, d_mmu_write); + + /* The system-call trap is reached by "break 13". */ + set_exception_vector(0x1d, system_call); + + /* Exception handlers for debugging, both user-mode and kernel-mode. */ + + /* Break 8. */ + set_exception_vector(0x18, gdb_handle_exception); + /* Hardware single step. */ + set_exception_vector(0x3, gdb_handle_exception); + /* Hardware breakpoint. */ + set_exception_vector(0xc, gdb_handle_exception); + +#ifdef CONFIG_ETRAX_KGDB + kgdb_init(); + /* Everything is set up; now trap the kernel. */ + breakpoint(); +#endif +} + diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c new file mode 100644 index 000000000000..480e56348be2 --- /dev/null +++ b/arch/cris/arch-v32/kernel/kgdb.c @@ -0,0 +1,1660 @@ +/* + * arch/cris/arch-v32/kernel/kgdb.c + * + * CRIS v32 version by Orjan Friberg, Axis Communications AB. + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), + * + * Originally written by Glenn Engel, Lake Stevens Instrument Division + * + * Contributed by HP Systems + * + * Modified for SPARC by Stu Grossman, Cygnus Support. + * + * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse + * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de> + * + * Copyright (C) 1995 Andreas Busse + */ + +/* FIXME: Check the documentation. */ + +/* + * kgdb usage notes: + * ----------------- + * + * If you select CONFIG_ETRAX_KGDB in the configuration, the kernel will be + * built with different gcc flags: "-g" is added to get debug infos, and + * "-fomit-frame-pointer" is omitted to make debugging easier. Since the + * resulting kernel will be quite big (approx. > 7 MB), it will be stripped + * before compresion. Such a kernel will behave just as usually, except if + * given a "debug=<device>" command line option. (Only serial devices are + * allowed for <device>, i.e. no printers or the like; possible values are + * machine depedend and are the same as for the usual debug device, the one + * for logging kernel messages.) If that option is given and the device can be + * initialized, the kernel will connect to the remote gdb in trap_init(). The + * serial parameters are fixed to 8N1 and 115200 bps, for easyness of + * implementation. + * + * To start a debugging session, start that gdb with the debugging kernel + * image (the one with the symbols, vmlinux.debug) named on the command line. + * This file will be used by gdb to get symbol and debugging infos about the + * kernel. Next, select remote debug mode by + * target remote <device> + * where <device> is the name of the serial device over which the debugged + * machine is connected. Maybe you have to adjust the baud rate by + * set remotebaud <rate> + * or also other parameters with stty: + * shell stty ... </dev/... + * If the kernel to debug has already booted, it waited for gdb and now + * connects, and you'll see a breakpoint being reported. If the kernel isn't + * running yet, start it now. The order of gdb and the kernel doesn't matter. + * Another thing worth knowing about in the getting-started phase is how to + * debug the remote protocol itself. This is activated with + * set remotedebug 1 + * gdb will then print out each packet sent or received. You'll also get some + * messages about the gdb stub on the console of the debugged machine. + * + * If all that works, you can use lots of the usual debugging techniques on + * the kernel, e.g. inspecting and changing variables/memory, setting + * breakpoints, single stepping and so on. It's also possible to interrupt the + * debugged kernel by pressing C-c in gdb. Have fun! :-) + * + * The gdb stub is entered (and thus the remote gdb gets control) in the + * following situations: + * + * - If breakpoint() is called. This is just after kgdb initialization, or if + * a breakpoint() call has been put somewhere into the kernel source. + * (Breakpoints can of course also be set the usual way in gdb.) + * In eLinux, we call breakpoint() in init/main.c after IRQ initialization. + * + * - If there is a kernel exception, i.e. bad_super_trap() or die_if_kernel() + * are entered. All the CPU exceptions are mapped to (more or less..., see + * the hard_trap_info array below) appropriate signal, which are reported + * to gdb. die_if_kernel() is usually called after some kind of access + * error and thus is reported as SIGSEGV. + * + * - When panic() is called. This is reported as SIGABRT. + * + * - If C-c is received over the serial line, which is treated as + * SIGINT. + * + * Of course, all these signals are just faked for gdb, since there is no + * signal concept as such for the kernel. It also isn't possible --obviously-- + * to set signal handlers from inside gdb, or restart the kernel with a + * signal. + * + * Current limitations: + * + * - While the kernel is stopped, interrupts are disabled for safety reasons + * (i.e., variables not changing magically or the like). But this also + * means that the clock isn't running anymore, and that interrupts from the + * hardware may get lost/not be served in time. This can cause some device + * errors... + * + * - When single-stepping, only one instruction of the current thread is + * executed, but interrupts are allowed for that time and will be serviced + * if pending. Be prepared for that. + * + * - All debugging happens in kernel virtual address space. There's no way to + * access physical memory not mapped in kernel space, or to access user + * space. A way to work around this is using get_user_long & Co. in gdb + * expressions, but only for the current process. + * + * - Interrupting the kernel only works if interrupts are currently allowed, + * and the interrupt of the serial line isn't blocked by some other means + * (IPL too high, disabled, ...) + * + * - The gdb stub is currently not reentrant, i.e. errors that happen therein + * (e.g. accessing invalid memory) may not be caught correctly. This could + * be removed in future by introducing a stack of struct registers. + * + */ + +/* + * To enable debugger support, two things need to happen. One, a + * call to kgdb_init() is necessary in order to allow any breakpoints + * or error conditions to be properly intercepted and reported to gdb. + * Two, a breakpoint needs to be generated to begin communication. This + * is most easily accomplished by a call to breakpoint(). + * + * The following gdb commands are supported: + * + * command function Return value + * + * g return the value of the CPU registers hex data or ENN + * G set the value of the CPU registers OK or ENN + * + * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN + * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN + * + * c Resume at current address SNN ( signal NN) + * cAA..AA Continue at address AA..AA SNN + * + * s Step one instruction SNN + * sAA..AA Step one instruction from AA..AA SNN + * + * k kill + * + * ? What was the last sigval ? SNN (signal NN) + * + * bBB..BB Set baud rate to BB..BB OK or BNN, then sets + * baud rate + * + * All commands and responses are sent with a packet which includes a + * checksum. A packet consists of + * + * $<packet info>#<checksum>. + * + * where + * <packet info> :: <characters representing the command or response> + * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>> + * + * When a packet is received, it is first acknowledged with either '+' or '-'. + * '+' indicates a successful transfer. '-' indicates a failed transfer. + * + * Example: + * + * Host: Reply: + * $m0,10#2a +$00010203040506070809101112131415#42 + * + */ + + +#include <linux/string.h> +#include <linux/signal.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/linkage.h> +#include <linux/reboot.h> + +#include <asm/setup.h> +#include <asm/ptrace.h> + +#include <asm/irq.h> +#include <asm/arch/hwregs/reg_map.h> +#include <asm/arch/hwregs/reg_rdwr.h> +#include <asm/arch/hwregs/intr_vect_defs.h> +#include <asm/arch/hwregs/ser_defs.h> + +/* From entry.S. */ +extern void gdb_handle_exception(void); +/* From kgdb_asm.S. */ +extern void kgdb_handle_exception(void); + +static int kgdb_started = 0; + +/********************************* Register image ****************************/ + +typedef +struct register_image +{ + /* Offset */ + unsigned int r0; /* 0x00 */ + unsigned int r1; /* 0x04 */ + unsigned int r2; /* 0x08 */ + unsigned int r3; /* 0x0C */ + unsigned int r4; /* 0x10 */ + unsigned int r5; /* 0x14 */ + unsigned int r6; /* 0x18 */ + unsigned int r7; /* 0x1C */ + unsigned int r8; /* 0x20; Frame pointer (if any) */ + unsigned int r9; /* 0x24 */ + unsigned int r10; /* 0x28 */ + unsigned int r11; /* 0x2C */ + unsigned int r12; /* 0x30 */ + unsigned int r13; /* 0x34 */ + unsigned int sp; /* 0x38; R14, Stack pointer */ + unsigned int acr; /* 0x3C; R15, Address calculation register. */ + + unsigned char bz; /* 0x40; P0, 8-bit zero register */ + unsigned char vr; /* 0x41; P1, Version register (8-bit) */ + unsigned int pid; /* 0x42; P2, Process ID */ + unsigned char srs; /* 0x46; P3, Support register select (8-bit) */ + unsigned short wz; /* 0x47; P4, 16-bit zero register */ + unsigned int exs; /* 0x49; P5, Exception status */ + unsigned int eda; /* 0x4D; P6, Exception data address */ + unsigned int mof; /* 0x51; P7, Multiply overflow register */ + unsigned int dz; /* 0x55; P8, 32-bit zero register */ + unsigned int ebp; /* 0x59; P9, Exception base pointer */ + unsigned int erp; /* 0x5D; P10, Exception return pointer. Contains the PC we are interested in. */ + unsigned int srp; /* 0x61; P11, Subroutine return pointer */ + unsigned int nrp; /* 0x65; P12, NMI return pointer */ + unsigned int ccs; /* 0x69; P13, Condition code stack */ + unsigned int usp; /* 0x6D; P14, User mode stack pointer */ + unsigned int spc; /* 0x71; P15, Single step PC */ + unsigned int pc; /* 0x75; Pseudo register (for the most part set to ERP). */ + +} registers; + +typedef +struct bp_register_image +{ + /* Support register bank 0. */ + unsigned int s0_0; + unsigned int s1_0; + unsigned int s2_0; + unsigned int s3_0; + unsigned int s4_0; + unsigned int s5_0; + unsigned int s6_0; + unsigned int s7_0; + unsigned int s8_0; + unsigned int s9_0; + unsigned int s10_0; + unsigned int s11_0; + unsigned int s12_0; + unsigned int s13_0; + unsigned int s14_0; + unsigned int s15_0; + + /* Support register bank 1. */ + unsigned int s0_1; + unsigned int s1_1; + unsigned int s2_1; + unsigned int s3_1; + unsigned int s4_1; + unsigned int s5_1; + unsigned int s6_1; + unsigned int s7_1; + unsigned int s8_1; + unsigned int s9_1; + unsigned int s10_1; + unsigned int s11_1; + unsigned int s12_1; + unsigned int s13_1; + unsigned int s14_1; + unsigned int s15_1; + + /* Support register bank 2. */ + unsigned int s0_2; + unsigned int s1_2; + unsigned int s2_2; + unsigned int s3_2; + unsigned int s4_2; + unsigned int s5_2; + unsigned int s6_2; + unsigned int s7_2; + unsigned int s8_2; + unsigned int s9_2; + unsigned int s10_2; + unsigned int s11_2; + unsigned int s12_2; + unsigned int s13_2; + unsigned int s14_2; + unsigned int s15_2; + + /* Support register bank 3. */ + unsigned int s0_3; /* BP_CTRL */ + unsigned int s1_3; /* BP_I0_START */ + unsigned int s2_3; /* BP_I0_END */ + unsigned int s3_3; /* BP_D0_START */ + unsigned int s4_3; /* BP_D0_END */ + unsigned int s5_3; /* BP_D1_START */ + unsigned int s6_3; /* BP_D1_END */ + unsigned int s7_3; /* BP_D2_START */ + unsigned int s8_3; /* BP_D2_END */ + unsigned int s9_3; /* BP_D3_START */ + unsigned int s10_3; /* BP_D3_END */ + unsigned int s11_3; /* BP_D4_START */ + unsigned int s12_3; /* BP_D4_END */ + unsigned int s13_3; /* BP_D5_START */ + unsigned int s14_3; /* BP_D5_END */ + unsigned int s15_3; /* BP_RESERVED */ + +} support_registers; + +enum register_name +{ + R0, R1, R2, R3, + R4, R5, R6, R7, + R8, R9, R10, R11, + R12, R13, SP, ACR, + + BZ, VR, PID, SRS, + WZ, EXS, EDA, MOF, + DZ, EBP, ERP, SRP, + NRP, CCS, USP, SPC, + PC, + + S0, S1, S2, S3, + S4, S5, S6, S7, + S8, S9, S10, S11, + S12, S13, S14, S15 + +}; + +/* The register sizes of the registers in register_name. An unimplemented register + is designated by size 0 in this array. */ +static int register_size[] = +{ + 4, 4, 4, 4, + 4, 4, 4, 4, + 4, 4, 4, 4, + 4, 4, 4, 4, + + 1, 1, 4, 1, + 2, 4, 4, 4, + 4, 4, 4, 4, + 4, 4, 4, 4, + + 4, + + 4, 4, 4, 4, + 4, 4, 4, 4, + 4, 4, 4, 4, + 4, 4, 4 + +}; + +/* Contains the register image of the kernel. + (Global so that they can be reached from assembler code.) */ +registers reg; +support_registers sreg; + +/************** Prototypes for local library functions ***********************/ + +/* Copy of strcpy from libc. */ +static char *gdb_cris_strcpy(char *s1, const char *s2); + +/* Copy of strlen from libc. */ +static int gdb_cris_strlen(const char *s); + +/* Copy of memchr from libc. */ +static void *gdb_cris_memchr(const void *s, int c, int n); + +/* Copy of strtol from libc. Does only support base 16. */ +static int gdb_cris_strtol(const char *s, char **endptr, int base); + +/********************** Prototypes for local functions. **********************/ + +/* Write a value to a specified register regno in the register image + of the current thread. */ +static int write_register(int regno, char *val); + +/* Read a value from a specified register in the register image. Returns the + status of the read operation. The register value is returned in valptr. */ +static int read_register(char regno, unsigned int *valptr); + +/* Serial port, reads one character. ETRAX 100 specific. from debugport.c */ +int getDebugChar(void); + +#ifdef CONFIG_ETRAXFS_SIM +int getDebugChar(void) +{ + return socketread(); +} +#endif + +/* Serial port, writes one character. ETRAX 100 specific. from debugport.c */ +void putDebugChar(int val); + +#ifdef CONFIG_ETRAXFS_SIM +void putDebugChar(int val) +{ + socketwrite((char *)&val, 1); +} +#endif + +/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte, + represented by int x. */ +static char highhex(int x); + +/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte, + represented by int x. */ +static char lowhex(int x); + +/* Returns the integer equivalent of a hexadecimal character. */ +static int hex(char ch); + +/* Convert the memory, pointed to by mem into hexadecimal representation. + Put the result in buf, and return a pointer to the last character + in buf (null). */ +static char *mem2hex(char *buf, unsigned char *mem, int count); + +/* Convert the array, in hexadecimal representation, pointed to by buf into + binary representation. Put the result in mem, and return a pointer to + the character after the last byte written. */ +static unsigned char *hex2mem(unsigned char *mem, char *buf, int count); + +/* Put the content of the array, in binary representation, pointed to by buf + into memory pointed to by mem, and return a pointer to + the character after the last byte written. */ +static unsigned char *bin2mem(unsigned char *mem, unsigned char *buf, int count); + +/* Await the sequence $<data>#<checksum> and store <data> in the array buffer + returned. */ +static void getpacket(char *buffer); + +/* Send $<data>#<checksum> from the <data> in the array buffer. */ +static void putpacket(char *buffer); + +/* Build and send a response packet in order to inform the host the + stub is stopped. */ +static void stub_is_stopped(int sigval); + +/* All expected commands are sent from remote.c. Send a response according + to the description in remote.c. Not static since it needs to be reached + from assembler code. */ +void handle_exception(int sigval); + +/* Performs a complete re-start from scratch. ETRAX specific. */ +static void kill_restart(void); + +/******************** Prototypes for global functions. ***********************/ + +/* The string str is prepended with the GDB printout token and sent. */ +void putDebugString(const unsigned char *str, int len); + +/* A static breakpoint to be used at startup. */ +void breakpoint(void); + +/* Avoid warning as the internal_stack is not used in the C-code. */ +#define USEDVAR(name) { if (name) { ; } } +#define USEDFUN(name) { void (*pf)(void) = (void *)name; USEDVAR(pf) } + +/********************************** Packet I/O ******************************/ +/* BUFMAX defines the maximum number of characters in + inbound/outbound buffers */ +/* FIXME: How do we know it's enough? */ +#define BUFMAX 512 + +/* Run-length encoding maximum length. Send 64 at most. */ +#define RUNLENMAX 64 + +/* Definition of all valid hexadecimal characters */ +static const char hexchars[] = "0123456789abcdef"; + +/* The inbound/outbound buffers used in packet I/O */ +static char input_buffer[BUFMAX]; +static char output_buffer[BUFMAX]; + +/* Error and warning messages. */ +enum error_type +{ + SUCCESS, E01, E02, E03, E04, E05, E06, +}; + +static char *error_message[] = +{ + "", + "E01 Set current or general thread - H[c,g] - internal error.", + "E02 Change register content - P - cannot change read-only register.", + "E03 Thread is not alive.", /* T, not used. */ + "E04 The command is not supported - [s,C,S,!,R,d,r] - internal error.", + "E05 Change register content - P - the register is not implemented..", + "E06 Change memory content - M - internal error.", +}; + +/********************************** Breakpoint *******************************/ +/* Use an internal stack in the breakpoint and interrupt response routines. + FIXME: How do we know the size of this stack is enough? + Global so it can be reached from assembler code. */ +#define INTERNAL_STACK_SIZE 1024 +char internal_stack[INTERNAL_STACK_SIZE]; + +/* Due to the breakpoint return pointer, a state variable is needed to keep + track of whether it is a static (compiled) or dynamic (gdb-invoked) + breakpoint to be handled. A static breakpoint uses the content of register + ERP as it is whereas a dynamic breakpoint requires subtraction with 2 + in order to execute the instruction. The first breakpoint is static; all + following are assumed to be dynamic. */ +static int dynamic_bp = 0; + +/********************************* String library ****************************/ +/* Single-step over library functions creates trap loops. */ + +/* Copy char s2[] to s1[]. */ +static char* +gdb_cris_strcpy(char *s1, const char *s2) +{ + char *s = s1; + + for (s = s1; (*s++ = *s2++) != '\0'; ) + ; + return s1; +} + +/* Find length of s[]. */ +static int +gdb_cris_strlen(const char *s) +{ + const char *sc; + + for (sc = s; *sc != '\0'; sc++) + ; + return (sc - s); +} + +/* Find first occurrence of c in s[n]. */ +static void* +gdb_cris_memchr(const void *s, int c, int n) +{ + const unsigned char uc = c; + const unsigned char *su; + + for (su = s; 0 < n; ++su, --n) + if (*su == uc) + return (void *)su; + return NULL; +} +/******************************* Standard library ****************************/ +/* Single-step over library functions creates trap loops. */ +/* Convert string to long. */ +static int +gdb_cris_strtol(const char *s, char **endptr, int base) +{ + char *s1; + char *sd; + int x = 0; + + for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1) + x = x * base + (sd - hexchars); + + if (endptr) { + /* Unconverted suffix is stored in endptr unless endptr is NULL. */ + *endptr = s1; + } + + return x; +} + +/********************************* Register image ****************************/ + +/* Write a value to a specified register in the register image of the current + thread. Returns status code SUCCESS, E02 or E05. */ +static int +write_register(int regno, char *val) +{ + int status = SUCCESS; + + if (regno >= R0 && regno <= ACR) { + /* Consecutive 32-bit registers. */ + hex2mem((unsigned char *)®.r0 + (regno - R0) * sizeof(unsigned int), + val, sizeof(unsigned int)); + + } else if (regno == BZ || regno == VR || regno == WZ || regno == DZ) { + /* Read-only registers. */ + status = E02; + + } else if (regno == PID) { + /* 32-bit register. (Even though we already checked SRS and WZ, we cannot + combine this with the EXS - SPC write since SRS and WZ have different size.) */ + hex2mem((unsigned char *)®.pid, val, sizeof(unsigned int)); + + } else if (regno == SRS) { + /* 8-bit register. */ + hex2mem((unsigned char *)®.srs, val, sizeof(unsigned char)); + + } else if (regno >= EXS && regno <= SPC) { + /* Consecutive 32-bit registers. */ + hex2mem((unsigned char *)®.exs + (regno - EXS) * sizeof(unsigned int), + val, sizeof(unsigned int)); + + } else if (regno == PC) { + /* Pseudo-register. Treat as read-only. */ + status = E02; + + } else if (regno >= S0 && regno <= S15) { + /* 32-bit registers. */ + hex2mem((unsigned char *)&sreg.s0_0 + (reg.srs * 16 * sizeof(unsigned int)) + (regno - S0) * sizeof(unsigned int), val, sizeof(unsigned int)); + } else { + /* Non-existing register. */ + status = E05; + } + return status; +} + +/* Read a value from a specified register in the register image. Returns the + value in the register or -1 for non-implemented registers. */ +static int +read_register(char regno, unsigned int *valptr) +{ + int status = SUCCESS; + + /* We read the zero registers from the register struct (instead of just returning 0) + to catch errors. */ + + if (regno >= R0 && regno <= ACR) { + /* Consecutive 32-bit registers. */ + *valptr = *(unsigned int *)((char *)®.r0 + (regno - R0) * sizeof(unsigned int)); + + } else if (regno == BZ || regno == VR) { + /* Consecutive 8-bit registers. */ + *valptr = (unsigned int)(*(unsigned char *) + ((char *)®.bz + (regno - BZ) * sizeof(char))); + + } else if (regno == PID) { + /* 32-bit register. */ + *valptr = *(unsigned int *)((char *)®.pid); + + } else if (regno == SRS) { + /* 8-bit register. */ + *valptr = (unsigned int)(*(unsigned char *)((char *)®.srs)); + + } else if (regno == WZ) { + /* 16-bit register. */ + *valptr = (unsigned int)(*(unsigned short *)(char *)®.wz); + + } else if (regno >= EXS && regno <= PC) { + /* Consecutive 32-bit registers. */ + *valptr = *(unsigned int *)((char *)®.exs + (regno - EXS) * sizeof(unsigned int)); + + } else if (regno >= S0 && regno <= S15) { + /* Consecutive 32-bit registers, located elsewhere. */ + *valptr = *(unsigned int *)((char *)&sreg.s0_0 + (reg.srs * 16 * sizeof(unsigned int)) + (regno - S0) * sizeof(unsigned int)); + + } else { + /* Non-existing register. */ + status = E05; + } + return status; + +} + +/********************************** Packet I/O ******************************/ +/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte, + represented by int x. */ +static inline char +highhex(int x) +{ + return hexchars[(x >> 4) & 0xf]; +} + +/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte, + represented by int x. */ +static inline char +lowhex(int x) +{ + return hexchars[x & 0xf]; +} + +/* Returns the integer equivalent of a hexadecimal character. */ +static int +hex(char ch) +{ + if ((ch >= 'a') && (ch <= 'f')) + return (ch - 'a' + 10); + if ((ch >= '0') && (ch <= '9')) + return (ch - '0'); + if ((ch >= 'A') && (ch <= 'F')) + return (ch - 'A' + 10); + return -1; +} + +/* Convert the memory, pointed to by mem into hexadecimal representation. + Put the result in buf, and return a pointer to the last character + in buf (null). */ + +static char * +mem2hex(char *buf, unsigned char *mem, int count) +{ + int i; + int ch; + + if (mem == NULL) { + /* Invalid address, caught by 'm' packet handler. */ + for (i = 0; i < count; i++) { + *buf++ = '0'; + *buf++ = '0'; + } + } else { + /* Valid mem address. */ + for (i = 0; i < count; i++) { + ch = *mem++; + *buf++ = highhex (ch); + *buf++ = lowhex (ch); + } + } + /* Terminate properly. */ + *buf = '\0'; + return buf; +} + +/* Same as mem2hex, but puts it in network byte order. */ +static char * +mem2hex_nbo(char *buf, unsigned char *mem, int count) +{ + int i; + int ch; + + mem += count - 1; + for (i = 0; i < count; i++) { + ch = *mem--; + *buf++ = highhex (ch); + *buf++ = lowhex (ch); + } + + /* Terminate properly. */ + *buf = '\0'; + return buf; +} + +/* Convert the array, in hexadecimal representation, pointed to by buf into + binary representation. Put the result in mem, and return a pointer to + the character after the last byte written. */ +static unsigned char* +hex2mem(unsigned char *mem, char *buf, int count) +{ + int i; + unsigned char ch; + for (i = 0; i < count; i++) { + ch = hex (*buf++) << 4; + ch = ch + hex (*buf++); + *mem++ = ch; + } + return mem; +} + +/* Put the content of the array, in binary representation, pointed to by buf + into memory pointed to by mem, and return a pointer to the character after + the last byte written. + Gdb will escape $, #, and the escape char (0x7d). */ +static unsigned char* +bin2mem(unsigned char *mem, unsigned char *buf, int count) +{ + int i; + unsigned char *next; + for (i = 0; i < count; i++) { + /* Check for any escaped characters. Be paranoid and + only unescape chars that should be escaped. */ + if (*buf == 0x7d) { + next = buf + 1; + if (*next == 0x3 || *next == 0x4 || *next == 0x5D) { + /* #, $, ESC */ + buf++; + *buf += 0x20; + } + } + *mem++ = *buf++; + } + return mem; +} + +/* Await the sequence $<data>#<checksum> and store <data> in the array buffer + returned. */ +static void +getpacket(char *buffer) +{ + unsigned char checksum; + unsigned char xmitcsum; + int i; + int count; + char ch; + + do { + while((ch = getDebugChar ()) != '$') + /* Wait for the start character $ and ignore all other characters */; + checksum = 0; + xmitcsum = -1; + count = 0; + /* Read until a # or the end of the buffer is reached */ + while (count < BUFMAX) { + ch = getDebugChar(); + if (ch == '#') + break; + checksum = checksum + ch; + buffer[count] = ch; + count = count + 1; + } + + if (count >= BUFMAX) + continue; + + buffer[count] = 0; + + if (ch == '#') { + xmitcsum = hex(getDebugChar()) << 4; + xmitcsum += hex(getDebugChar()); + if (checksum != xmitcsum) { + /* Wrong checksum */ + putDebugChar('-'); + } else { + /* Correct checksum */ + putDebugChar('+'); + /* If sequence characters are received, reply with them */ + if (buffer[2] == ':') { + putDebugChar(buffer[0]); + putDebugChar(buffer[1]); + /* Remove the sequence characters from the buffer */ + count = gdb_cris_strlen(buffer); + for (i = 3; i <= count; i++) + buffer[i - 3] = buffer[i]; + } + } + } + } while (checksum != xmitcsum); +} + +/* Send $<data>#<checksum> from the <data> in the array buffer. */ + +static void +putpacket(char *buffer) +{ + int checksum; + int runlen; + int encode; + + do { + char *src = buffer; + putDebugChar('$'); + checksum = 0; + while (*src) { + /* Do run length encoding */ + putDebugChar(*src); + checksum += *src; + runlen = 0; + while (runlen < RUNLENMAX && *src == src[runlen]) { + runlen++; + } + if (runlen > 3) { + /* Got a useful amount */ + putDebugChar ('*'); + checksum += '*'; + encode = runlen + ' ' - 4; + putDebugChar(encode); + checksum += encode; + src += runlen; + } else { + src++; + } + } + putDebugChar('#'); + putDebugChar(highhex (checksum)); + putDebugChar(lowhex (checksum)); + } while(kgdb_started && (getDebugChar() != '+')); +} + +/* The string str is prepended with the GDB printout token and sent. Required + in traditional implementations. */ +void +putDebugString(const unsigned char *str, int len) +{ + /* Move SPC forward if we are single-stepping. */ + asm("spchere:"); + asm("move $spc, $r10"); + asm("cmp.d spchere, $r10"); + asm("bne nosstep"); + asm("nop"); + asm("move.d spccont, $r10"); + asm("move $r10, $spc"); + asm("nosstep:"); + + output_buffer[0] = 'O'; + mem2hex(&output_buffer[1], (unsigned char *)str, len); + putpacket(output_buffer); + + asm("spccont:"); +} + +/********************************** Handle exceptions ************************/ +/* Build and send a response packet in order to inform the host the + stub is stopped. TAAn...:r...;n...:r...;n...:r...; + AA = signal number + n... = register number (hex) + r... = register contents + n... = `thread' + r... = thread process ID. This is a hex integer. + n... = other string not starting with valid hex digit. + gdb should ignore this n,r pair and go on to the next. + This way we can extend the protocol. */ +static void +stub_is_stopped(int sigval) +{ + char *ptr = output_buffer; + unsigned int reg_cont; + + /* Send trap type (converted to signal) */ + + *ptr++ = 'T'; + *ptr++ = highhex(sigval); + *ptr++ = lowhex(sigval); + + if (((reg.exs & 0xff00) >> 8) == 0xc) { + + /* Some kind of hardware watchpoint triggered. Find which one + and determine its type (read/write/access). */ + int S, bp, trig_bits = 0, rw_bits = 0; + int trig_mask = 0; + unsigned int *bp_d_regs = &sreg.s3_3; + /* In a lot of cases, the stopped data address will simply be EDA. + In some cases, we adjust it to match the watched data range. + (We don't want to change the actual EDA though). */ + unsigned int stopped_data_address; + /* The S field of EXS. */ + S = (reg.exs & 0xffff0000) >> 16; + + if (S & 1) { + /* Instruction watchpoint. */ + /* FIXME: Check against, and possibly adjust reported EDA. */ + } else { + /* Data watchpoint. Find the one that triggered. */ + for (bp = 0; bp < 6; bp++) { + + /* Dx_RD, Dx_WR in the S field of EXS for this BP. */ + int bitpos_trig = 1 + bp * 2; + /* Dx_BPRD, Dx_BPWR in BP_CTRL for this BP. */ + int bitpos_config = 2 + bp * 4; + + /* Get read/write trig bits for this BP. */ + trig_bits = (S & (3 << bitpos_trig)) >> bitpos_trig; + + /* Read/write config bits for this BP. */ + rw_bits = (sreg.s0_3 & (3 << bitpos_config)) >> bitpos_config; + if (trig_bits) { + /* Sanity check: the BP shouldn't trigger for accesses + that it isn't configured for. */ + if ((rw_bits == 0x1 && trig_bits != 0x1) || + (rw_bits == 0x2 && trig_bits != 0x2)) + panic("Invalid r/w trigging for this BP"); + + /* Mark this BP as trigged for future reference. */ + trig_mask |= (1 << bp); + + if (reg.eda >= bp_d_regs[bp * 2] && + reg.eda <= bp_d_regs[bp * 2 + 1]) { + /* EDA withing range for this BP; it must be the one + we're looking for. */ + stopped_data_address = reg.eda; + break; + } + } + } + if (bp < 6) { + /* Found a trigged BP with EDA within its configured data range. */ + } else if (trig_mask) { + /* Something triggered, but EDA doesn't match any BP's range. */ + for (bp = 0; bp < 6; bp++) { + /* Dx_BPRD, Dx_BPWR in BP_CTRL for this BP. */ + int bitpos_config = 2 + bp * 4; + + /* Read/write config bits for this BP (needed later). */ + rw_bits = (sreg.s0_3 & (3 << bitpos_config)) >> bitpos_config; + + if (trig_mask & (1 << bp)) { + /* EDA within 31 bytes of the configured start address? */ + if (reg.eda + 31 >= bp_d_regs[bp * 2]) { + /* Changing the reported address to match + the start address of the first applicable BP. */ + stopped_data_address = bp_d_regs[bp * 2]; + break; + } else { + /* We continue since we might find another useful BP. */ + printk("EDA doesn't match trigged BP's range"); + } + } + } + } + + /* No match yet? */ + BUG_ON(bp >= 6); + /* Note that we report the type according to what the BP is configured + for (otherwise we'd never report an 'awatch'), not according to how + it trigged. We did check that the trigged bits match what the BP is + configured for though. */ + if (rw_bits == 0x1) { + /* read */ + strncpy(ptr, "rwatch", 6); + ptr += 6; + } else if (rw_bits == 0x2) { + /* write */ + strncpy(ptr, "watch", 5); + ptr += 5; + } else if (rw_bits == 0x3) { + /* access */ + strncpy(ptr, "awatch", 6); + ptr += 6; + } else { + panic("Invalid r/w bits for this BP."); + } + + *ptr++ = ':'; + /* Note that we don't read_register(EDA, ...) */ + ptr = mem2hex_nbo(ptr, (unsigned char *)&stopped_data_address, register_size[EDA]); + *ptr++ = ';'; + } + } + /* Only send PC, frame and stack pointer. */ + read_register(PC, ®_cont); + *ptr++ = highhex(PC); + *ptr++ = lowhex(PC); + *ptr++ = ':'; + ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[PC]); + *ptr++ = ';'; + + read_register(R8, ®_cont); + *ptr++ = highhex(R8); + *ptr++ = lowhex(R8); + *ptr++ = ':'; + ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[R8]); + *ptr++ = ';'; + + read_register(SP, ®_cont); + *ptr++ = highhex(SP); + *ptr++ = lowhex(SP); + *ptr++ = ':'; + ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[SP]); + *ptr++ = ';'; + + /* Send ERP as well; this will save us an entire register fetch in some cases. */ + read_register(ERP, ®_cont); + *ptr++ = highhex(ERP); + *ptr++ = lowhex(ERP); + *ptr++ = ':'; + ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[ERP]); + *ptr++ = ';'; + + /* null-terminate and send it off */ + *ptr = 0; + putpacket(output_buffer); +} + +/* Returns the size of an instruction that has a delay slot. */ + +int insn_size(unsigned long pc) +{ + unsigned short opcode = *(unsigned short *)pc; + int size = 0; + + switch ((opcode & 0x0f00) >> 8) { + case 0x0: + case 0x9: + case 0xb: + size = 2; + break; + case 0xe: + case 0xf: + size = 6; + break; + case 0xd: + /* Could be 4 or 6; check more bits. */ + if ((opcode & 0xff) == 0xff) + size = 4; + else + size = 6; + break; + default: + panic("Couldn't find size of opcode 0x%x at 0x%lx\n", opcode, pc); + } + + return size; +} + +void register_fixup(int sigval) +{ + /* Compensate for ACR push at the beginning of exception handler. */ + reg.sp += 4; + + /* Standard case. */ + reg.pc = reg.erp; + if (reg.erp & 0x1) { + /* Delay slot bit set. Report as stopped on proper instruction. */ + if (reg.spc) { + /* Rely on SPC if set. */ + reg.pc = reg.spc; + } else { + /* Calculate the PC from the size of the instruction + that the delay slot we're in belongs to. */ + reg.pc += insn_size(reg.erp & ~1) - 1 ; + } + } + + if ((reg.exs & 0x3) == 0x0) { + /* Bits 1 - 0 indicate the type of memory operation performed + by the interrupted instruction. 0 means no memory operation, + and EDA is undefined in that case. We zero it to avoid confusion. */ + reg.eda = 0; + } + + if (sigval == SIGTRAP) { + /* Break 8, single step or hardware breakpoint exception. */ + + /* Check IDX field of EXS. */ + if (((reg.exs & 0xff00) >> 8) == 0x18) { + + /* Break 8. */ + + /* Static (compiled) breakpoints must return to the next instruction + in order to avoid infinite loops (default value of ERP). Dynamic + (gdb-invoked) must subtract the size of the break instruction from + the ERP so that the instruction that was originally in the break + instruction's place will be run when we return from the exception. */ + if (!dynamic_bp) { + /* Assuming that all breakpoints are dynamic from now on. */ + dynamic_bp = 1; + } else { + + /* Only if not in a delay slot. */ + if (!(reg.erp & 0x1)) { + reg.erp -= 2; + reg.pc -= 2; + } + } + + } else if (((reg.exs & 0xff00) >> 8) == 0x3) { + /* Single step. */ + /* Don't fiddle with S1. */ + + } else if (((reg.exs & 0xff00) >> 8) == 0xc) { + + /* Hardware watchpoint exception. */ + + /* SPC has been updated so that we will get a single step exception + when we return, but we don't want that. */ + reg.spc = 0; + + /* Don't fiddle with S1. */ + } + + } else if (sigval == SIGINT) { + /* Nothing special. */ + } +} + +static void insert_watchpoint(char type, int addr, int len) +{ + /* Breakpoint/watchpoint types (GDB terminology): + 0 = memory breakpoint for instructions + (not supported; done via memory write instead) + 1 = hardware breakpoint for instructions (supported) + 2 = write watchpoint (supported) + 3 = read watchpoint (supported) + 4 = access watchpoint (supported) */ + + if (type < '1' || type > '4') { + output_buffer[0] = 0; + return; + } + + /* Read watchpoints are set as access watchpoints, because of GDB's + inability to deal with pure read watchpoints. */ + if (type == '3') + type = '4'; + + if (type == '1') { + /* Hardware (instruction) breakpoint. */ + /* Bit 0 in BP_CTRL holds the configuration for I0. */ + if (sreg.s0_3 & 0x1) { + /* Already in use. */ + gdb_cris_strcpy(output_buffer, error_message[E04]); + return; + } + /* Configure. */ + sreg.s1_3 = addr; + sreg.s2_3 = (addr + len - 1); + sreg.s0_3 |= 1; + } else { + int bp; + unsigned int *bp_d_regs = &sreg.s3_3; + + /* The watchpoint allocation scheme is the simplest possible. + For example, if a region is watched for read and + a write watch is requested, a new watchpoint will + be used. Also, if a watch for a region that is already + covered by one or more existing watchpoints, a new + watchpoint will be used. */ + + /* First, find a free data watchpoint. */ + for (bp = 0; bp < 6; bp++) { + /* Each data watchpoint's control registers occupy 2 bits + (hence the 3), starting at bit 2 for D0 (hence the 2) + with 4 bits between for each watchpoint (yes, the 4). */ + if (!(sreg.s0_3 & (0x3 << (2 + (bp * 4))))) { + break; + } + } + + if (bp > 5) { + /* We're out of watchpoints. */ + gdb_cris_strcpy(output_buffer, error_message[E04]); + return; + } + + /* Configure the control register first. */ + if (type == '3' || type == '4') { + /* Trigger on read. */ + sreg.s0_3 |= (1 << (2 + bp * 4)); + } + if (type == '2' || type == '4') { + /* Trigger on write. */ + sreg.s0_3 |= (2 << (2 + bp * 4)); + } + + /* Ugly pointer arithmetics to configure the watched range. */ + bp_d_regs[bp * 2] = addr; + bp_d_regs[bp * 2 + 1] = (addr + len - 1); + } + + /* Set the S1 flag to enable watchpoints. */ + reg.ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT)); + gdb_cris_strcpy(output_buffer, "OK"); +} + +static void remove_watchpoint(char type, int addr, int len) +{ + /* Breakpoint/watchpoint types: + 0 = memory breakpoint for instructions + (not supported; done via memory write instead) + 1 = hardware breakpoint for instructions (supported) + 2 = write watchpoint (supported) + 3 = read watchpoint (supported) + 4 = access watchpoint (supported) */ + if (type < '1' || type > '4') { + output_buffer[0] = 0; + return; + } + + /* Read watchpoints are set as access watchpoints, because of GDB's + inability to deal with pure read watchpoints. */ + if (type == '3') + type = '4'; + + if (type == '1') { + /* Hardware breakpoint. */ + /* Bit 0 in BP_CTRL holds the configuration for I0. */ + if (!(sreg.s0_3 & 0x1)) { + /* Not in use. */ + gdb_cris_strcpy(output_buffer, error_message[E04]); + return; + } + /* Deconfigure. */ + sreg.s1_3 = 0; + sreg.s2_3 = 0; + sreg.s0_3 &= ~1; + } else { + int bp; + unsigned int *bp_d_regs = &sreg.s3_3; + /* Try to find a watchpoint that is configured for the + specified range, then check that read/write also matches. */ + + /* Ugly pointer arithmetic, since I cannot rely on a + single switch (addr) as there may be several watchpoints with + the same start address for example. */ + + for (bp = 0; bp < 6; bp++) { + if (bp_d_regs[bp * 2] == addr && + bp_d_regs[bp * 2 + 1] == (addr + len - 1)) { + /* Matching range. */ + int bitpos = 2 + bp * 4; + int rw_bits; + + /* Read/write bits for this BP. */ + rw_bits = (sreg.s0_3 & (0x3 << bitpos)) >> bitpos; + + if ((type == '3' && rw_bits == 0x1) || + (type == '2' && rw_bits == 0x2) || + (type == '4' && rw_bits == 0x3)) { + /* Read/write matched. */ + break; + } + } + } + + if (bp > 5) { + /* No watchpoint matched. */ + gdb_cris_strcpy(output_buffer, error_message[E04]); + return; + } + + /* Found a matching watchpoint. Now, deconfigure it by + both disabling read/write in bp_ctrl and zeroing its + start/end addresses. */ + sreg.s0_3 &= ~(3 << (2 + (bp * 4))); + bp_d_regs[bp * 2] = 0; + bp_d_regs[bp * 2 + 1] = 0; + } + + /* Note that we don't clear the S1 flag here. It's done when continuing. */ + gdb_cris_strcpy(output_buffer, "OK"); +} + + + +/* All expected commands are sent from remote.c. Send a response according + to the description in remote.c. */ +void +handle_exception(int sigval) +{ + /* Avoid warning of not used. */ + + USEDFUN(handle_exception); + USEDVAR(internal_stack[0]); + + register_fixup(sigval); + + /* Send response. */ + stub_is_stopped(sigval); + + for (;;) { + output_buffer[0] = '\0'; + getpacket(input_buffer); + switch (input_buffer[0]) { + case 'g': + /* Read registers: g + Success: Each byte of register data is described by two hex digits. + Registers are in the internal order for GDB, and the bytes + in a register are in the same order the machine uses. + Failure: void. */ + { + char *buf; + /* General and special registers. */ + buf = mem2hex(output_buffer, (char *)®, sizeof(registers)); + /* Support registers. */ + /* -1 because of the null termination that mem2hex adds. */ + mem2hex(buf, + (char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)), + 16 * sizeof(unsigned int)); + break; + } + case 'G': + /* Write registers. GXX..XX + Each byte of register data is described by two hex digits. + Success: OK + Failure: void. */ + /* General and special registers. */ + hex2mem((char *)®, &input_buffer[1], sizeof(registers)); + /* Support registers. */ + hex2mem((char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)), + &input_buffer[1] + sizeof(registers), + 16 * sizeof(unsigned int)); + gdb_cris_strcpy(output_buffer, "OK"); + break; + + case 'P': + /* Write register. Pn...=r... + Write register n..., hex value without 0x, with value r..., + which contains a hex value without 0x and two hex digits + for each byte in the register (target byte order). P1f=11223344 means + set register 31 to 44332211. + Success: OK + Failure: E02, E05 */ + { + char *suffix; + int regno = gdb_cris_strtol(&input_buffer[1], &suffix, 16); + int status; + + status = write_register(regno, suffix+1); + + switch (status) { + case E02: + /* Do not support read-only registers. */ + gdb_cris_strcpy(output_buffer, error_message[E02]); + break; + case E05: + /* Do not support non-existing registers. */ + gdb_cris_strcpy(output_buffer, error_message[E05]); + break; + default: + /* Valid register number. */ + gdb_cris_strcpy(output_buffer, "OK"); + break; + } + } + break; + + case 'm': + /* Read from memory. mAA..AA,LLLL + AA..AA is the address and LLLL is the length. + Success: XX..XX is the memory content. Can be fewer bytes than + requested if only part of the data may be read. m6000120a,6c means + retrieve 108 byte from base address 6000120a. + Failure: void. */ + { + char *suffix; + unsigned char *addr = (unsigned char *)gdb_cris_strtol(&input_buffer[1], + &suffix, 16); + int len = gdb_cris_strtol(suffix+1, 0, 16); + + /* Bogus read (i.e. outside the kernel's + segment)? . */ + if (!((unsigned int)addr >= 0xc0000000 && + (unsigned int)addr < 0xd0000000)) + addr = NULL; + + mem2hex(output_buffer, addr, len); + } + break; + + case 'X': + /* Write to memory. XAA..AA,LLLL:XX..XX + AA..AA is the start address, LLLL is the number of bytes, and + XX..XX is the binary data. + Success: OK + Failure: void. */ + case 'M': + /* Write to memory. MAA..AA,LLLL:XX..XX + AA..AA is the start address, LLLL is the number of bytes, and + XX..XX is the hexadecimal data. + Success: OK + Failure: void. */ + { + char *lenptr; + char *dataptr; + unsigned char *addr = (unsigned char *)gdb_cris_strtol(&input_buffer[1], + &lenptr, 16); + int len = gdb_cris_strtol(lenptr+1, &dataptr, 16); + if (*lenptr == ',' && *dataptr == ':') { + if (input_buffer[0] == 'M') { + hex2mem(addr, dataptr + 1, len); + } else /* X */ { + bin2mem(addr, dataptr + 1, len); + } + gdb_cris_strcpy(output_buffer, "OK"); + } + else { + gdb_cris_strcpy(output_buffer, error_message[E06]); + } + } + break; + + case 'c': + /* Continue execution. cAA..AA + AA..AA is the address where execution is resumed. If AA..AA is + omitted, resume at the present address. + Success: return to the executing thread. + Failure: will never know. */ + + if (input_buffer[1] != '\0') { + /* FIXME: Doesn't handle address argument. */ + gdb_cris_strcpy(output_buffer, error_message[E04]); + break; + } + + /* Before continuing, make sure everything is set up correctly. */ + + /* Set the SPC to some unlikely value. */ + reg.spc = 0; + /* Set the S1 flag to 0 unless some watchpoint is enabled (since setting + S1 to 0 would also disable watchpoints). (Note that bits 26-31 in BP_CTRL + are reserved, so don't check against those). */ + if ((sreg.s0_3 & 0x3fff) == 0) { + reg.ccs &= ~(1 << (S_CCS_BITNR + CCS_SHIFT)); + } + + return; + + case 's': + /* Step. sAA..AA + AA..AA is the address where execution is resumed. If AA..AA is + omitted, resume at the present address. Success: return to the + executing thread. Failure: will never know. */ + + if (input_buffer[1] != '\0') { + /* FIXME: Doesn't handle address argument. */ + gdb_cris_strcpy(output_buffer, error_message[E04]); + break; + } + + /* Set the SPC to PC, which is where we'll return + (deduced previously). */ + reg.spc = reg.pc; + + /* Set the S1 (first stacked, not current) flag, which will + kick into action when we rfe. */ + reg.ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT)); + return; + + case 'Z': + + /* Insert breakpoint or watchpoint, Ztype,addr,length. + Remote protocol says: A remote target shall return an empty string + for an unrecognized breakpoint or watchpoint packet type. */ + { + char *lenptr; + char *dataptr; + int addr = gdb_cris_strtol(&input_buffer[3], &lenptr, 16); + int len = gdb_cris_strtol(lenptr + 1, &dataptr, 16); + char type = input_buffer[1]; + + insert_watchpoint(type, addr, len); + break; + } + + case 'z': + /* Remove breakpoint or watchpoint, Ztype,addr,length. + Remote protocol says: A remote target shall return an empty string + for an unrecognized breakpoint or watchpoint packet type. */ + { + char *lenptr; + char *dataptr; + int addr = gdb_cris_strtol(&input_buffer[3], &lenptr, 16); + int len = gdb_cris_strtol(lenptr + 1, &dataptr, 16); + char type = input_buffer[1]; + + remove_watchpoint(type, addr, len); + break; + } + + + case '?': + /* The last signal which caused a stop. ? + Success: SAA, where AA is the signal number. + Failure: void. */ + output_buffer[0] = 'S'; + output_buffer[1] = highhex(sigval); + output_buffer[2] = lowhex(sigval); + output_buffer[3] = 0; + break; + + case 'D': + /* Detach from host. D + Success: OK, and return to the executing thread. + Failure: will never know */ + putpacket("OK"); + return; + + case 'k': + case 'r': + /* kill request or reset request. + Success: restart of target. + Failure: will never know. */ + kill_restart(); + break; + + case 'C': + case 'S': + case '!': + case 'R': + case 'd': + /* Continue with signal sig. Csig;AA..AA + Step with signal sig. Ssig;AA..AA + Use the extended remote protocol. ! + Restart the target system. R0 + Toggle debug flag. d + Search backwards. tAA:PP,MM + Not supported: E04 */ + + /* FIXME: What's the difference between not supported + and ignored (below)? */ + gdb_cris_strcpy(output_buffer, error_message[E04]); + break; + + default: + /* The stub should ignore other request and send an empty + response ($#<checksum>). This way we can extend the protocol and GDB + can tell whether the stub it is talking to uses the old or the new. */ + output_buffer[0] = 0; + break; + } + putpacket(output_buffer); + } +} + +void +kgdb_init(void) +{ + reg_intr_vect_rw_mask intr_mask; + reg_ser_rw_intr_mask ser_intr_mask; + + /* Configure the kgdb serial port. */ +#if defined(CONFIG_ETRAX_KGDB_PORT0) + /* Note: no shortcut registered (not handled by multiple_interrupt). + See entry.S. */ + set_exception_vector(SER0_INTR_VECT, kgdb_handle_exception); + /* Enable the ser irq in the global config. */ + intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); + intr_mask.ser0 = 1; + REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); + + ser_intr_mask = REG_RD(ser, regi_ser0, rw_intr_mask); + ser_intr_mask.data_avail = regk_ser_yes; + REG_WR(ser, regi_ser0, rw_intr_mask, ser_intr_mask); +#elif defined(CONFIG_ETRAX_KGDB_PORT1) + /* Note: no shortcut registered (not handled by multiple_interrupt). + See entry.S. */ + set_exception_vector(SER1_INTR_VECT, kgdb_handle_exception); + /* Enable the ser irq in the global config. */ + intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); + intr_mask.ser1 = 1; + REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); + + ser_intr_mask = REG_RD(ser, regi_ser1, rw_intr_mask); + ser_intr_mask.data_avail = regk_ser_yes; + REG_WR(ser, regi_ser1, rw_intr_mask, ser_intr_mask); +#elif defined(CONFIG_ETRAX_KGDB_PORT2) + /* Note: no shortcut registered (not handled by multiple_interrupt). + See entry.S. */ + set_exception_vector(SER2_INTR_VECT, kgdb_handle_exception); + /* Enable the ser irq in the global config. */ + intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); + intr_mask.ser2 = 1; + REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); + + ser_intr_mask = REG_RD(ser, regi_ser2, rw_intr_mask); + ser_intr_mask.data_avail = regk_ser_yes; + REG_WR(ser, regi_ser2, rw_intr_mask, ser_intr_mask); +#elif defined(CONFIG_ETRAX_KGDB_PORT3) + /* Note: no shortcut registered (not handled by multiple_interrupt). + See entry.S. */ + set_exception_vector(SER3_INTR_VECT, kgdb_handle_exception); + /* Enable the ser irq in the global config. */ + intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); + intr_mask.ser3 = 1; + REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); + + ser_intr_mask = REG_RD(ser, regi_ser3, rw_intr_mask); + ser_intr_mask.data_avail = regk_ser_yes; + REG_WR(ser, regi_ser3, rw_intr_mask, ser_intr_mask); +#endif + +} +/* Performs a complete re-start from scratch. */ +static void +kill_restart(void) +{ + machine_restart(""); +} + +/* Use this static breakpoint in the start-up only. */ + +void +breakpoint(void) +{ + kgdb_started = 1; + dynamic_bp = 0; /* This is a static, not a dynamic breakpoint. */ + __asm__ volatile ("break 8"); /* Jump to kgdb_handle_breakpoint. */ +} + +/****************************** End of file **********************************/ diff --git a/arch/cris/arch-v32/kernel/kgdb_asm.S b/arch/cris/arch-v32/kernel/kgdb_asm.S new file mode 100644 index 000000000000..b350dd279ed2 --- /dev/null +++ b/arch/cris/arch-v32/kernel/kgdb_asm.S @@ -0,0 +1,552 @@ +/* + * Copyright (C) 2004 Axis Communications AB + * + * Code for handling break 8, hardware breakpoint, single step, and serial + * port exceptions for kernel debugging purposes. + */ + +#include <linux/config.h> +#include <asm/arch/hwregs/intr_vect.h> + + ;; Exported functions. + .globl kgdb_handle_exception + +kgdb_handle_exception: + +;; Create a register image of the caller. +;; +;; First of all, save the ACR on the stack since we need it for address calculations. +;; We put it into the register struct later. + + subq 4, $sp + move.d $acr, [$sp] + +;; Now we are free to use ACR all we want. +;; If we were running this handler with interrupts on, we would have to be careful +;; to save and restore CCS manually, but since we aren't we treat it like every other +;; register. + + move.d reg, $acr + move.d $r0, [$acr] ; Save R0 (start of register struct) + addq 4, $acr + move.d $r1, [$acr] ; Save R1 + addq 4, $acr + move.d $r2, [$acr] ; Save R2 + addq 4, $acr + move.d $r3, [$acr] ; Save R3 + addq 4, $acr + move.d $r4, [$acr] ; Save R4 + addq 4, $acr + move.d $r5, [$acr] ; Save R5 + addq 4, $acr + move.d $r6, [$acr] ; Save R6 + addq 4, $acr + move.d $r7, [$acr] ; Save R7 + addq 4, $acr + move.d $r8, [$acr] ; Save R8 + addq 4, $acr + move.d $r9, [$acr] ; Save R9 + addq 4, $acr + move.d $r10, [$acr] ; Save R10 + addq 4, $acr + move.d $r11, [$acr] ; Save R11 + addq 4, $acr + move.d $r12, [$acr] ; Save R12 + addq 4, $acr + move.d $r13, [$acr] ; Save R13 + addq 4, $acr + move.d $sp, [$acr] ; Save SP (R14) + addq 4, $acr + + ;; The ACR register is already saved on the stack, so pop it from there. + move.d [$sp],$r0 + move.d $r0, [$acr] + addq 4, $acr + + move $bz, [$acr] + addq 1, $acr + move $vr, [$acr] + addq 1, $acr + move $pid, [$acr] + addq 4, $acr + move $srs, [$acr] + addq 1, $acr + move $wz, [$acr] + addq 2, $acr + move $exs, [$acr] + addq 4, $acr + move $eda, [$acr] + addq 4, $acr + move $mof, [$acr] + addq 4, $acr + move $dz, [$acr] + addq 4, $acr + move $ebp, [$acr] + addq 4, $acr + move $erp, [$acr] + addq 4, $acr + move $srp, [$acr] + addq 4, $acr + move $nrp, [$acr] + addq 4, $acr + move $ccs, [$acr] + addq 4, $acr + move $usp, [$acr] + addq 4, $acr + move $spc, [$acr] + addq 4, $acr + +;; Skip the pseudo-PC. + addq 4, $acr + +;; Save the support registers in bank 0 - 3. + clear.d $r1 ; Bank counter + move.d sreg, $acr + +;; Bank 0 + move $r1, $srs + nop + nop + nop + move $s0, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s1, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s2, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s3, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s4, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s5, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s6, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s7, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s8, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s9, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s10, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s11, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s12, $r0 + move.d $r0, [$acr] + addq 4, $acr + + ;; Nothing in S13 - S15, bank 0 + clear.d [$acr] + addq 4, $acr + clear.d [$acr] + addq 4, $acr + clear.d [$acr] + addq 4, $acr + +;; Bank 1 and bank 2 have the same layout, hence the loop. + addq 1, $r1 +1: + move $r1, $srs + nop + nop + nop + move $s0, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s1, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s2, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s3, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s4, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s5, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s6, $r0 + move.d $r0, [$acr] + addq 4, $acr + + ;; Nothing in S7 - S15, bank 1 and 2 + clear.d [$acr] + addq 4, $acr + clear.d [$acr] + addq 4, $acr + clear.d [$acr] + addq 4, $acr + clear.d [$acr] + addq 4, $acr + clear.d [$acr] + addq 4, $acr + clear.d [$acr] + addq 4, $acr + clear.d [$acr] + addq 4, $acr + clear.d [$acr] + addq 4, $acr + clear.d [$acr] + addq 4, $acr + + addq 1, $r1 + cmpq 3, $r1 + bne 1b + nop + +;; Bank 3 + move $r1, $srs + nop + nop + nop + move $s0, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s1, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s2, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s3, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s4, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s5, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s6, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s7, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s8, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s9, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s10, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s11, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s12, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s13, $r0 + move.d $r0, [$acr] + addq 4, $acr + move $s14, $r0 + move.d $r0, [$acr] + addq 4, $acr +;; Nothing in S15, bank 3 + clear.d [$acr] + addq 4, $acr + +;; Check what got us here: get IDX field of EXS. + move $exs, $r10 + and.d 0xff00, $r10 + lsrq 8, $r10 +#if defined(CONFIG_ETRAX_KGDB_PORT0) + cmp.d SER0_INTR_VECT, $r10 ; IRQ for serial port 0 + beq sigint + nop +#elif defined(CONFIG_ETRAX_KGDB_PORT1) + cmp.d SER1_INTR_VECT, $r10 ; IRQ for serial port 1 + beq sigint + nop +#elif defined(CONFIG_ETRAX_KGDB_PORT2) + cmp.d SER2_INTR_VECT, $r10 ; IRQ for serial port 2 + beq sigint + nop +#elif defined(CONFIG_ETRAX_KGDB_PORT3) + cmp.d SER3_INTR_VECT, $r10 ; IRQ for serial port 3 + beq sigint + nop +#endif +;; Multiple interrupt must be due to serial break. + cmp.d 0x30, $r10 ; Multiple interrupt + beq sigint + nop +;; Neither of those? Then it's a sigtrap. + ba handle_comm + moveq 5, $r10 ; Set SIGTRAP (delay slot) + +sigint: + ;; Serial interrupt; get character + jsr getDebugChar + nop ; Delay slot + cmp.b 3, $r10 ; \003 (Ctrl-C)? + bne return ; No, get out of here + nop + moveq 2, $r10 ; Set SIGINT + +;; +;; Handle the communication +;; +handle_comm: + move.d internal_stack+1020, $sp ; Use the internal stack which grows upwards + jsr handle_exception ; Interactive routine + nop + +;; +;; Return to the caller +;; +return: + +;; First of all, write the support registers. + clear.d $r1 ; Bank counter + move.d sreg, $acr + +;; Bank 0 + move $r1, $srs + nop + nop + nop + move.d [$acr], $r0 + move $r0, $s0 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s1 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s2 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s3 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s4 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s5 + addq 4, $acr + +;; Nothing in S6 - S7, bank 0. + addq 4, $acr + addq 4, $acr + + move.d [$acr], $r0 + move $r0, $s8 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s9 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s10 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s11 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s12 + addq 4, $acr + +;; Nothing in S13 - S15, bank 0 + addq 4, $acr + addq 4, $acr + addq 4, $acr + +;; Bank 1 and bank 2 have the same layout, hence the loop. + addq 1, $r1 +2: + move $r1, $srs + nop + nop + nop + move.d [$acr], $r0 + move $r0, $s0 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s1 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s2 + addq 4, $acr + +;; S3 (MM_CAUSE) is read-only. + addq 4, $acr + + move.d [$acr], $r0 + move $r0, $s4 + addq 4, $acr + +;; FIXME: Actually write S5/S6? (Affects MM_CAUSE.) + addq 4, $acr + addq 4, $acr + +;; Nothing in S7 - S15, bank 1 and 2 + addq 4, $acr + addq 4, $acr + addq 4, $acr + addq 4, $acr + addq 4, $acr + addq 4, $acr + addq 4, $acr + addq 4, $acr + addq 4, $acr + + addq 1, $r1 + cmpq 3, $r1 + bne 2b + nop + +;; Bank 3 + move $r1, $srs + nop + nop + nop + move.d [$acr], $r0 + move $r0, $s0 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s1 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s2 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s3 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s4 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s5 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s6 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s7 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s8 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s9 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s10 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s11 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s12 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s13 + addq 4, $acr + move.d [$acr], $r0 + move $r0, $s14 + addq 4, $acr + +;; Nothing in S15, bank 3 + addq 4, $acr + +;; Now, move on to the regular register restoration process. + + move.d reg, $acr ; Reset ACR to point at the beginning of the register image + move.d [$acr], $r0 ; Restore R0 + addq 4, $acr + move.d [$acr], $r1 ; Restore R1 + addq 4, $acr + move.d [$acr], $r2 ; Restore R2 + addq 4, $acr + move.d [$acr], $r3 ; Restore R3 + addq 4, $acr + move.d [$acr], $r4 ; Restore R4 + addq 4, $acr + move.d [$acr], $r5 ; Restore R5 + addq 4, $acr + move.d [$acr], $r6 ; Restore R6 + addq 4, $acr + move.d [$acr], $r7 ; Restore R7 + addq 4, $acr + move.d [$acr], $r8 ; Restore R8 + addq 4, $acr + move.d [$acr], $r9 ; Restore R9 + addq 4, $acr + move.d [$acr], $r10 ; Restore R10 + addq 4, $acr + move.d [$acr], $r11 ; Restore R11 + addq 4, $acr + move.d [$acr], $r12 ; Restore R12 + addq 4, $acr + move.d [$acr], $r13 ; Restore R13 + +;; +;; We restore all registers, even though some of them probably haven't changed. +;; + + addq 4, $acr + move.d [$acr], $sp ; Restore SP (R14) + + ;; ACR cannot be restored just yet. + addq 8, $acr + + ;; Skip BZ, VR. + addq 2, $acr + + move [$acr], $pid ; Restore PID + addq 4, $acr + move [$acr], $srs ; Restore SRS + nop + nop + nop + addq 1, $acr + + ;; Skip WZ. + addq 2, $acr + + move [$acr], $exs ; Restore EXS. + addq 4, $acr + move [$acr], $eda ; Restore EDA. + addq 4, $acr + move [$acr], $mof ; Restore MOF. + + ;; Skip DZ. + addq 8, $acr + + move [$acr], $ebp ; Restore EBP. + addq 4, $acr + move [$acr], $erp ; Restore ERP. + addq 4, $acr + move [$acr], $srp ; Restore SRP. + addq 4, $acr + move [$acr], $nrp ; Restore NRP. + addq 4, $acr + move [$acr], $ccs ; Restore CCS like an ordinary register. + addq 4, $acr + move [$acr], $usp ; Restore USP + addq 4, $acr + move [$acr], $spc ; Restore SPC + ; No restoration of pseudo-PC of course. + + move.d reg, $acr ; Reset ACR to point at the beginning of the register image + add.d 15*4, $acr + move.d [$acr], $acr ; Finally, restore ACR. + rete ; Same as jump ERP + rfe ; Shifts CCS diff --git a/arch/cris/arch-v32/kernel/pinmux.c b/arch/cris/arch-v32/kernel/pinmux.c new file mode 100644 index 000000000000..a2b8aa37c1bf --- /dev/null +++ b/arch/cris/arch-v32/kernel/pinmux.c @@ -0,0 +1,229 @@ +/* + * Allocator for I/O pins. All pins are allocated to GPIO at bootup. + * Unassigned pins and GPIO pins can be allocated to a fixed interface + * or the I/O processor instead. + * + * Copyright (c) 2004 Axis Communications AB. + */ + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/spinlock.h> +#include <asm/arch/hwregs/reg_map.h> +#include <asm/arch/hwregs/reg_rdwr.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/hwregs/pinmux_defs.h> + +#undef DEBUG + +#define PORT_PINS 18 +#define PORTS 4 + +static char pins[PORTS][PORT_PINS]; +static DEFINE_SPINLOCK(pinmux_lock); + +static void crisv32_pinmux_set(int port); + +int +crisv32_pinmux_init(void) +{ + static int initialized = 0; + + if (!initialized) { + reg_pinmux_rw_pa pa = REG_RD(pinmux, regi_pinmux, rw_pa); + initialized = 1; + pa.pa0 = pa.pa1 = pa.pa2 = pa.pa3 = + pa.pa4 = pa.pa5 = pa.pa6 = pa.pa7 = regk_pinmux_yes; + REG_WR(pinmux, regi_pinmux, rw_pa, pa); + crisv32_pinmux_alloc(PORT_B, 0, PORT_PINS - 1, pinmux_gpio); + crisv32_pinmux_alloc(PORT_C, 0, PORT_PINS - 1, pinmux_gpio); + crisv32_pinmux_alloc(PORT_D, 0, PORT_PINS - 1, pinmux_gpio); + crisv32_pinmux_alloc(PORT_E, 0, PORT_PINS - 1, pinmux_gpio); + } + + return 0; +} + +int +crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode) +{ + int i; + unsigned long flags; + + crisv32_pinmux_init(); + + if (port > PORTS) + return -EINVAL; + + spin_lock_irqsave(&pinmux_lock, flags); + + for (i = first_pin; i <= last_pin; i++) + { + if ((pins[port][i] != pinmux_none) && (pins[port][i] != pinmux_gpio) && + (pins[port][i] != mode)) + { + spin_unlock_irqrestore(&pinmux_lock, flags); +#ifdef DEBUG + panic("Pinmux alloc failed!\n"); +#endif + return -EPERM; + } + } + + for (i = first_pin; i <= last_pin; i++) + pins[port][i] = mode; + + crisv32_pinmux_set(port); + + spin_unlock_irqrestore(&pinmux_lock, flags); + + return 0; +} + +int +crisv32_pinmux_alloc_fixed(enum fixed_function function) +{ + int ret = -EINVAL; + char saved[sizeof pins]; + unsigned long flags; + + spin_lock_irqsave(&pinmux_lock, flags); + + /* Save internal data for recovery */ + memcpy(saved, pins, sizeof pins); + + reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); + + switch(function) + { + case pinmux_ser1: + ret = crisv32_pinmux_alloc(PORT_C, 4, 7, pinmux_fixed); + hwprot.ser1 = regk_pinmux_yes; + break; + case pinmux_ser2: + ret = crisv32_pinmux_alloc(PORT_C, 8, 11, pinmux_fixed); + hwprot.ser2 = regk_pinmux_yes; + break; + case pinmux_ser3: + ret = crisv32_pinmux_alloc(PORT_C, 12, 15, pinmux_fixed); + hwprot.ser3 = regk_pinmux_yes; + break; + case pinmux_sser0: + ret = crisv32_pinmux_alloc(PORT_C, 0, 3, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed); + hwprot.sser0 = regk_pinmux_yes; + break; + case pinmux_sser1: + ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed); + hwprot.sser1 = regk_pinmux_yes; + break; + case pinmux_ata0: + ret = crisv32_pinmux_alloc(PORT_D, 5, 7, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_D, 15, 17, pinmux_fixed); + hwprot.ata0 = regk_pinmux_yes; + break; + case pinmux_ata1: + ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_E, 17, 17, pinmux_fixed); + hwprot.ata1 = regk_pinmux_yes; + break; + case pinmux_ata2: + ret = crisv32_pinmux_alloc(PORT_C, 11, 15, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_E, 3, 3, pinmux_fixed); + hwprot.ata2 = regk_pinmux_yes; + break; + case pinmux_ata3: + ret = crisv32_pinmux_alloc(PORT_C, 8, 10, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_C, 0, 2, pinmux_fixed); + hwprot.ata2 = regk_pinmux_yes; + break; + case pinmux_ata: + ret = crisv32_pinmux_alloc(PORT_B, 0, 15, pinmux_fixed); + ret |= crisv32_pinmux_alloc(PORT_D, 8, 15, pinmux_fixed); + hwprot.ata = regk_pinmux_yes; + break; + case pinmux_eth1: + ret = crisv32_pinmux_alloc(PORT_E, 0, 17, pinmux_fixed); + hwprot.eth1 = regk_pinmux_yes; + hwprot.eth1_mgm = regk_pinmux_yes; + break; + case pinmux_timer: + ret = crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed); + hwprot.timer = regk_pinmux_yes; + spin_unlock_irqrestore(&pinmux_lock, flags); + return ret; + } + + if (!ret) + REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); + else + memcpy(pins, saved, sizeof pins); + + spin_unlock_irqrestore(&pinmux_lock, flags); + + return ret; +} + +void +crisv32_pinmux_set(int port) +{ + int i; + int gpio_val = 0; + int iop_val = 0; + + for (i = 0; i < PORT_PINS; i++) + { + if (pins[port][i] == pinmux_gpio) + gpio_val |= (1 << i); + else if (pins[port][i] == pinmux_iop) + iop_val |= (1 << i); + } + + REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_gio + 8*port, gpio_val); + REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_iop + 8*port, iop_val); + +#ifdef DEBUG + crisv32_pinmux_dump(); +#endif +} + +int +crisv32_pinmux_dealloc(int port, int first_pin, int last_pin) +{ + int i; + unsigned long flags; + + crisv32_pinmux_init(); + + if (port > PORTS) + return -EINVAL; + + spin_lock_irqsave(&pinmux_lock, flags); + + for (i = first_pin; i <= last_pin; i++) + pins[port][i] = pinmux_none; + + crisv32_pinmux_set(port); + spin_unlock_irqrestore(&pinmux_lock, flags); + + return 0; +} + +void +crisv32_pinmux_dump(void) +{ + int i, j; + + crisv32_pinmux_init(); + + for (i = 0; i < PORTS; i++) + { + printk("Port %c\n", 'B'+i); + for (j = 0; j < PORT_PINS; j++) + printk(" Pin %d = %d\n", j, pins[i][j]); + } +} + +__initcall(crisv32_pinmux_init); diff --git a/arch/cris/arch-v32/kernel/process.c b/arch/cris/arch-v32/kernel/process.c new file mode 100644 index 000000000000..882be42114f7 --- /dev/null +++ b/arch/cris/arch-v32/kernel/process.c @@ -0,0 +1,270 @@ +/* + * Copyright (C) 2000-2003 Axis Communications AB + * + * Authors: Bjorn Wesen (bjornw@axis.com) + * Mikael Starvik (starvik@axis.com) + * Tobias Anderberg (tobiasa@axis.com), CRISv32 port. + * + * This file handles the architecture-dependent parts of process handling.. + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/err.h> +#include <linux/fs.h> +#include <linux/slab.h> +#include <asm/arch/hwregs/reg_rdwr.h> +#include <asm/arch/hwregs/reg_map.h> +#include <asm/arch/hwregs/timer_defs.h> +#include <asm/arch/hwregs/intr_vect_defs.h> + +extern void stop_watchdog(void); + +#ifdef CONFIG_ETRAX_GPIO +extern void etrax_gpio_wake_up_check(void); /* Defined in drivers/gpio.c. */ +#endif + +extern int cris_hlt_counter; + +/* We use this if we don't have any better idle routine. */ +void default_idle(void) +{ + local_irq_disable(); + if (!need_resched() && !cris_hlt_counter) { + /* Halt until exception. */ + __asm__ volatile("ei \n\t" + "halt "); + } + local_irq_enable(); +} + +/* + * Free current thread data structures etc.. + */ + +extern void deconfigure_bp(long pid); +void exit_thread(void) +{ + deconfigure_bp(current->pid); +} + +/* + * If the watchdog is enabled, disable interrupts and enter an infinite loop. + * The watchdog will reset the CPU after 0.1s. If the watchdog isn't enabled + * then enable it and wait. + */ +extern void arch_enable_nmi(void); + +void +hard_reset_now(void) +{ + /* + * Don't declare this variable elsewhere. We don't want any other + * code to know about it than the watchdog handler in entry.S and + * this code, implementing hard reset through the watchdog. + */ +#if defined(CONFIG_ETRAX_WATCHDOG) + extern int cause_of_death; +#endif + + printk("*** HARD RESET ***\n"); + local_irq_disable(); + +#if defined(CONFIG_ETRAX_WATCHDOG) + cause_of_death = 0xbedead; +#else +{ + reg_timer_rw_wd_ctrl wd_ctrl = {0}; + + stop_watchdog(); + + wd_ctrl.key = 16; /* Arbitrary key. */ + wd_ctrl.cnt = 1; /* Minimum time. */ + wd_ctrl.cmd = regk_timer_start; + + arch_enable_nmi(); + REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl); +} +#endif + + while (1) + ; /* Wait for reset. */ +} + +/* + * Return saved PC of a blocked thread. + */ +unsigned long thread_saved_pc(struct task_struct *t) +{ + return (unsigned long)user_regs(t->thread_info)->erp; +} + +static void +kernel_thread_helper(void* dummy, int (*fn)(void *), void * arg) +{ + fn(arg); + do_exit(-1); /* Should never be called, return bad exit value. */ +} + +/* Create a kernel thread. */ +int +kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) +{ + struct pt_regs regs; + + memset(®s, 0, sizeof(regs)); + + /* Don't use r10 since that is set to 0 in copy_thread. */ + regs.r11 = (unsigned long) fn; + regs.r12 = (unsigned long) arg; + regs.erp = (unsigned long) kernel_thread_helper; + regs.ccs = 1 << (I_CCS_BITNR + CCS_SHIFT); + + /* Create the new process. */ + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); +} + +/* + * Setup the child's kernel stack with a pt_regs and call switch_stack() on it. + * It will be unnested during _resume and _ret_from_sys_call when the new thread + * is scheduled. + * + * Also setup the thread switching structure which is used to keep + * thread-specific data during _resumes. + */ + +extern asmlinkage void ret_from_fork(void); + +int +copy_thread(int nr, unsigned long clone_flags, unsigned long usp, + unsigned long unused, + struct task_struct *p, struct pt_regs *regs) +{ + struct pt_regs *childregs; + struct switch_stack *swstack; + + /* + * Put the pt_regs structure at the end of the new kernel stack page and + * fix it up. Note: the task_struct doubles as the kernel stack for the + * task. + */ + childregs = user_regs(p->thread_info); + *childregs = *regs; /* Struct copy of pt_regs. */ + p->set_child_tid = p->clear_child_tid = NULL; + childregs->r10 = 0; /* Child returns 0 after a fork/clone. */ + + /* Set a new TLS ? + * The TLS is in $mof beacuse it is the 5th argument to sys_clone. + */ + if (p->mm && (clone_flags & CLONE_SETTLS)) { + p->thread_info->tls = regs->mof; + } + + /* Put the switch stack right below the pt_regs. */ + swstack = ((struct switch_stack *) childregs) - 1; + + /* Paramater to ret_from_sys_call. 0 is don't restart the syscall. */ + swstack->r9 = 0; + + /* + * We want to return into ret_from_sys_call after the _resume. + * ret_from_fork will call ret_from_sys_call. + */ + swstack->return_ip = (unsigned long) ret_from_fork; + + /* Fix the user-mode and kernel-mode stackpointer. */ + p->thread.usp = usp; + p->thread.ksp = (unsigned long) swstack; + + return 0; +} + +/* + * Be aware of the "magic" 7th argument in the four system-calls below. + * They need the latest stackframe, which is put as the 7th argument by + * entry.S. The previous arguments are dummies or actually used, but need + * to be defined to reach the 7th argument. + * + * N.B.: Another method to get the stackframe is to use current_regs(). But + * it returns the latest stack-frame stacked when going from _user mode_ and + * some of these (at least sys_clone) are called from kernel-mode sometimes + * (for example during kernel_thread, above) and thus cannot use it. Thus, + * to be sure not to get any surprises, we use the method for the other calls + * as well. + */ +asmlinkage int +sys_fork(long r10, long r11, long r12, long r13, long mof, long srp, + struct pt_regs *regs) +{ + return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL); +} + +/* FIXME: Is parent_tid/child_tid really third/fourth argument? Update lib? */ +asmlinkage int +sys_clone(unsigned long newusp, unsigned long flags, int *parent_tid, int *child_tid, + unsigned long tls, long srp, struct pt_regs *regs) +{ + if (!newusp) + newusp = rdusp(); + + return do_fork(flags, newusp, regs, 0, parent_tid, child_tid); +} + +/* + * vfork is a system call in i386 because of register-pressure - maybe + * we can remove it and handle it in libc but we put it here until then. + */ +asmlinkage int +sys_vfork(long r10, long r11, long r12, long r13, long mof, long srp, + struct pt_regs *regs) +{ + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, NULL); +} + +/* sys_execve() executes a new program. */ +asmlinkage int +sys_execve(const char *fname, char **argv, char **envp, long r13, long mof, long srp, + struct pt_regs *regs) +{ + int error; + char *filename; + + filename = getname(fname); + error = PTR_ERR(filename); + + if (IS_ERR(filename)) + goto out; + + error = do_execve(filename, argv, envp, regs); + putname(filename); + out: + return error; +} + +unsigned long +get_wchan(struct task_struct *p) +{ + /* TODO */ + return 0; +} +#undef last_sched +#undef first_sched + +void show_regs(struct pt_regs * regs) +{ + unsigned long usp = rdusp(); + printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n", + regs->erp, regs->srp, regs->ccs, usp, regs->mof); + + printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", + regs->r0, regs->r1, regs->r2, regs->r3); + + printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", + regs->r4, regs->r5, regs->r6, regs->r7); + + printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", + regs->r8, regs->r9, regs->r10, regs->r11); + + printk("r12: %08lx r13: %08lx oR10: %08lx\n", + regs->r12, regs->r13, regs->orig_r10); +} diff --git a/arch/cris/arch-v32/kernel/ptrace.c b/arch/cris/arch-v32/kernel/ptrace.c new file mode 100644 index 000000000000..208489da2a87 --- /dev/null +++ b/arch/cris/arch-v32/kernel/ptrace.c @@ -0,0 +1,597 @@ +/* + * Copyright (C) 2000-2003, Axis Communications AB. + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/user.h> +#include <linux/signal.h> +#include <linux/security.h> + +#include <asm/uaccess.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/arch/hwregs/supp_reg.h> + +/* + * Determines which bits in CCS the user has access to. + * 1 = access, 0 = no access. + */ +#define CCS_MASK 0x00087c00 /* SXNZVC */ + +#define SBIT_USER (1 << (S_CCS_BITNR + CCS_SHIFT)) + +static int put_debugreg(long pid, unsigned int regno, long data); +static long get_debugreg(long pid, unsigned int regno); +static unsigned long get_pseudo_pc(struct task_struct *child); +void deconfigure_bp(long pid); + +extern unsigned long cris_signal_return_page; + +/* + * Get contents of register REGNO in task TASK. + */ +long get_reg(struct task_struct *task, unsigned int regno) +{ + /* USP is a special case, it's not in the pt_regs struct but + * in the tasks thread struct + */ + unsigned long ret; + + if (regno <= PT_EDA) + ret = ((unsigned long *)user_regs(task->thread_info))[regno]; + else if (regno == PT_USP) + ret = task->thread.usp; + else if (regno == PT_PPC) + ret = get_pseudo_pc(task); + else if (regno <= PT_MAX) + ret = get_debugreg(task->pid, regno); + else + ret = 0; + + return ret; +} + +/* + * Write contents of register REGNO in task TASK. + */ +int put_reg(struct task_struct *task, unsigned int regno, unsigned long data) +{ + if (regno <= PT_EDA) + ((unsigned long *)user_regs(task->thread_info))[regno] = data; + else if (regno == PT_USP) + task->thread.usp = data; + else if (regno == PT_PPC) { + /* Write pseudo-PC to ERP only if changed. */ + if (data != get_pseudo_pc(task)) + ((unsigned long *)user_regs(task->thread_info))[PT_ERP] = data; + } else if (regno <= PT_MAX) + return put_debugreg(task->pid, regno, data); + else + return -1; + return 0; +} + +/* + * Called by kernel/ptrace.c when detaching. + * + * Make sure the single step bit is not set. + */ +void +ptrace_disable(struct task_struct *child) +{ + unsigned long tmp; + + /* Deconfigure SPC and S-bit. */ + tmp = get_reg(child, PT_CCS) & ~SBIT_USER; + put_reg(child, PT_CCS, tmp); + put_reg(child, PT_SPC, 0); + + /* Deconfigure any watchpoints associated with the child. */ + deconfigure_bp(child->pid); +} + + +asmlinkage int +sys_ptrace(long request, long pid, long addr, long data) +{ + struct task_struct *child; + int ret; + unsigned long __user *datap = (unsigned long __user *)data; + + lock_kernel(); + ret = -EPERM; + + if (request == PTRACE_TRACEME) { + /* are we already being traced? */ + if (current->ptrace & PT_PTRACED) + goto out; + ret = security_ptrace(current->parent, current); + if (ret) + goto out; + /* set the ptrace bit in the process flags. */ + current->ptrace |= PT_PTRACED; + ret = 0; + goto out; + } + + ret = -ESRCH; + read_lock(&tasklist_lock); + child = find_task_by_pid(pid); + + if (child) + get_task_struct(child); + + read_unlock(&tasklist_lock); + + if (!child) + goto out; + + ret = -EPERM; + + if (pid == 1) /* Leave the init process alone! */ + goto out_tsk; + + if (request == PTRACE_ATTACH) { + ret = ptrace_attach(child); + goto out_tsk; + } + + ret = ptrace_check_attach(child, request == PTRACE_KILL); + if (ret < 0) + goto out_tsk; + + switch (request) { + /* Read word at location address. */ + case PTRACE_PEEKTEXT: + case PTRACE_PEEKDATA: { + unsigned long tmp; + int copied; + + ret = -EIO; + + /* The signal trampoline page is outside the normal user-addressable + * space but still accessible. This is hack to make it possible to + * access the signal handler code in GDB. + */ + if ((addr & PAGE_MASK) == cris_signal_return_page) { + /* The trampoline page is globally mapped, no page table to traverse.*/ + tmp = *(unsigned long*)addr; + } else { + copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); + + if (copied != sizeof(tmp)) + break; + } + + ret = put_user(tmp,datap); + break; + } + + /* Read the word at location address in the USER area. */ + case PTRACE_PEEKUSR: { + unsigned long tmp; + + ret = -EIO; + if ((addr & 3) || addr < 0 || addr > PT_MAX << 2) + break; + + tmp = get_reg(child, addr >> 2); + ret = put_user(tmp, datap); + break; + } + + /* Write the word at location address. */ + case PTRACE_POKETEXT: + case PTRACE_POKEDATA: + ret = 0; + + if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data)) + break; + + ret = -EIO; + break; + + /* Write the word at location address in the USER area. */ + case PTRACE_POKEUSR: + ret = -EIO; + if ((addr & 3) || addr < 0 || addr > PT_MAX << 2) + break; + + addr >>= 2; + + if (addr == PT_CCS) { + /* don't allow the tracing process to change stuff like + * interrupt enable, kernel/user bit, dma enables etc. + */ + data &= CCS_MASK; + data |= get_reg(child, PT_CCS) & ~CCS_MASK; + } + if (put_reg(child, addr, data)) + break; + ret = 0; + break; + + case PTRACE_SYSCALL: + case PTRACE_CONT: + ret = -EIO; + + if (!valid_signal(data)) + break; + + /* Continue means no single-step. */ + put_reg(child, PT_SPC, 0); + + if (!get_debugreg(child->pid, PT_BP_CTRL)) { + unsigned long tmp; + /* If no h/w bp configured, disable S bit. */ + tmp = get_reg(child, PT_CCS) & ~SBIT_USER; + put_reg(child, PT_CCS, tmp); + } + + if (request == PTRACE_SYSCALL) { + set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + } + else { + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + } + + child->exit_code = data; + + /* TODO: make sure any pending breakpoint is killed */ + wake_up_process(child); + ret = 0; + + break; + + /* Make the child exit by sending it a sigkill. */ + case PTRACE_KILL: + ret = 0; + + if (child->exit_state == EXIT_ZOMBIE) + break; + + child->exit_code = SIGKILL; + + /* Deconfigure single-step and h/w bp. */ + ptrace_disable(child); + + /* TODO: make sure any pending breakpoint is killed */ + wake_up_process(child); + break; + + /* Set the trap flag. */ + case PTRACE_SINGLESTEP: { + unsigned long tmp; + ret = -EIO; + + /* Set up SPC if not set already (in which case we have + no other choice but to trust it). */ + if (!get_reg(child, PT_SPC)) { + /* In case we're stopped in a delay slot. */ + tmp = get_reg(child, PT_ERP) & ~1; + put_reg(child, PT_SPC, tmp); + } + tmp = get_reg(child, PT_CCS) | SBIT_USER; + put_reg(child, PT_CCS, tmp); + + if (!valid_signal(data)) + break; + + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + + /* TODO: set some clever breakpoint mechanism... */ + + child->exit_code = data; + wake_up_process(child); + ret = 0; + break; + + } + case PTRACE_DETACH: + ret = ptrace_detach(child, data); + break; + + /* Get all GP registers from the child. */ + case PTRACE_GETREGS: { + int i; + unsigned long tmp; + + for (i = 0; i <= PT_MAX; i++) { + tmp = get_reg(child, i); + + if (put_user(tmp, datap)) { + ret = -EFAULT; + goto out_tsk; + } + + datap++; + } + + ret = 0; + break; + } + + /* Set all GP registers in the child. */ + case PTRACE_SETREGS: { + int i; + unsigned long tmp; + + for (i = 0; i <= PT_MAX; i++) { + if (get_user(tmp, datap)) { + ret = -EFAULT; + goto out_tsk; + } + + if (i == PT_CCS) { + tmp &= CCS_MASK; + tmp |= get_reg(child, PT_CCS) & ~CCS_MASK; + } + + put_reg(child, i, tmp); + datap++; + } + + ret = 0; + break; + } + + default: + ret = ptrace_request(child, request, addr, data); + break; + } +out_tsk: + put_task_struct(child); +out: + unlock_kernel(); + return ret; +} + +void do_syscall_trace(void) +{ + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; + + if (!(current->ptrace & PT_PTRACED)) + return; + + /* the 0x80 provides a way for the tracing parent to distinguish + between a syscall stop and SIGTRAP delivery */ + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) + ? 0x80 : 0)); + + /* + * This isn't the same as continuing with a signal, but it will do for + * normal use. + */ + if (current->exit_code) { + send_sig(current->exit_code, current, 1); + current->exit_code = 0; + } +} + +/* Returns the size of an instruction that has a delay slot. */ + +static int insn_size(struct task_struct *child, unsigned long pc) +{ + unsigned long opcode; + int copied; + int opsize = 0; + + /* Read the opcode at pc (do what PTRACE_PEEKTEXT would do). */ + copied = access_process_vm(child, pc, &opcode, sizeof(opcode), 0); + if (copied != sizeof(opcode)) + return 0; + + switch ((opcode & 0x0f00) >> 8) { + case 0x0: + case 0x9: + case 0xb: + opsize = 2; + break; + case 0xe: + case 0xf: + opsize = 6; + break; + case 0xd: + /* Could be 4 or 6; check more bits. */ + if ((opcode & 0xff) == 0xff) + opsize = 4; + else + opsize = 6; + break; + default: + panic("ERROR: Couldn't find size of opcode 0x%lx at 0x%lx\n", + opcode, pc); + } + + return opsize; +} + +static unsigned long get_pseudo_pc(struct task_struct *child) +{ + /* Default value for PC is ERP. */ + unsigned long pc = get_reg(child, PT_ERP); + + if (pc & 0x1) { + unsigned long spc = get_reg(child, PT_SPC); + /* Delay slot bit set. Report as stopped on proper + instruction. */ + if (spc) { + /* Rely on SPC if set. FIXME: We might want to check + that EXS indicates we stopped due to a single-step + exception. */ + pc = spc; + } else { + /* Calculate the PC from the size of the instruction + that the delay slot we're in belongs to. */ + pc += insn_size(child, pc & ~1) - 1; + } + } + return pc; +} + +static long bp_owner = 0; + +/* Reachable from exit_thread in signal.c, so not static. */ +void deconfigure_bp(long pid) +{ + int bp; + + /* Only deconfigure if the pid is the owner. */ + if (bp_owner != pid) + return; + + for (bp = 0; bp < 6; bp++) { + unsigned long tmp; + /* Deconfigure start and end address (also gets rid of ownership). */ + put_debugreg(pid, PT_BP + 3 + (bp * 2), 0); + put_debugreg(pid, PT_BP + 4 + (bp * 2), 0); + + /* Deconfigure relevant bits in control register. */ + tmp = get_debugreg(pid, PT_BP_CTRL) & ~(3 << (2 + (bp * 4))); + put_debugreg(pid, PT_BP_CTRL, tmp); + } + /* No owner now. */ + bp_owner = 0; +} + +static int put_debugreg(long pid, unsigned int regno, long data) +{ + int ret = 0; + register int old_srs; + +#ifdef CONFIG_ETRAX_KGDB + /* Ignore write, but pretend it was ok if value is 0 + (we don't want POKEUSR/SETREGS failing unnessecarily). */ + return (data == 0) ? ret : -1; +#endif + + /* Simple owner management. */ + if (!bp_owner) + bp_owner = pid; + else if (bp_owner != pid) { + /* Ignore write, but pretend it was ok if value is 0 + (we don't want POKEUSR/SETREGS failing unnessecarily). */ + return (data == 0) ? ret : -1; + } + + /* Remember old SRS. */ + SPEC_REG_RD(SPEC_REG_SRS, old_srs); + /* Switch to BP bank. */ + SUPP_BANK_SEL(BANK_BP); + + switch (regno - PT_BP) { + case 0: + SUPP_REG_WR(0, data); break; + case 1: + case 2: + if (data) + ret = -1; + break; + case 3: + SUPP_REG_WR(3, data); break; + case 4: + SUPP_REG_WR(4, data); break; + case 5: + SUPP_REG_WR(5, data); break; + case 6: + SUPP_REG_WR(6, data); break; + case 7: + SUPP_REG_WR(7, data); break; + case 8: + SUPP_REG_WR(8, data); break; + case 9: + SUPP_REG_WR(9, data); break; + case 10: + SUPP_REG_WR(10, data); break; + case 11: + SUPP_REG_WR(11, data); break; + case 12: + SUPP_REG_WR(12, data); break; + case 13: + SUPP_REG_WR(13, data); break; + case 14: + SUPP_REG_WR(14, data); break; + default: + ret = -1; + break; + } + + /* Restore SRS. */ + SPEC_REG_WR(SPEC_REG_SRS, old_srs); + /* Just for show. */ + NOP(); + NOP(); + NOP(); + + return ret; +} + +static long get_debugreg(long pid, unsigned int regno) +{ + register int old_srs; + register long data; + + if (pid != bp_owner) { + return 0; + } + + /* Remember old SRS. */ + SPEC_REG_RD(SPEC_REG_SRS, old_srs); + /* Switch to BP bank. */ + SUPP_BANK_SEL(BANK_BP); + + switch (regno - PT_BP) { + case 0: + SUPP_REG_RD(0, data); break; + case 1: + case 2: + /* error return value? */ + data = 0; + break; + case 3: + SUPP_REG_RD(3, data); break; + case 4: + SUPP_REG_RD(4, data); break; + case 5: + SUPP_REG_RD(5, data); break; + case 6: + SUPP_REG_RD(6, data); break; + case 7: + SUPP_REG_RD(7, data); break; + case 8: + SUPP_REG_RD(8, data); break; + case 9: + SUPP_REG_RD(9, data); break; + case 10: + SUPP_REG_RD(10, data); break; + case 11: + SUPP_REG_RD(11, data); break; + case 12: + SUPP_REG_RD(12, data); break; + case 13: + SUPP_REG_RD(13, data); break; + case 14: + SUPP_REG_RD(14, data); break; + default: + /* error return value? */ + data = 0; + } + + /* Restore SRS. */ + SPEC_REG_WR(SPEC_REG_SRS, old_srs); + /* Just for show. */ + NOP(); + NOP(); + NOP(); + + return data; +} diff --git a/arch/cris/arch-v32/kernel/setup.c b/arch/cris/arch-v32/kernel/setup.c new file mode 100644 index 000000000000..b17a39a2e164 --- /dev/null +++ b/arch/cris/arch-v32/kernel/setup.c @@ -0,0 +1,118 @@ +/* + * Display CPU info in /proc/cpuinfo. + * + * Copyright (C) 2003, Axis Communications AB. + */ + +#include <linux/config.h> +#include <linux/seq_file.h> +#include <linux/proc_fs.h> +#include <linux/delay.h> +#include <linux/param.h> + +#ifdef CONFIG_PROC_FS + +#define HAS_FPU 0x0001 +#define HAS_MMU 0x0002 +#define HAS_ETHERNET100 0x0004 +#define HAS_TOKENRING 0x0008 +#define HAS_SCSI 0x0010 +#define HAS_ATA 0x0020 +#define HAS_USB 0x0040 +#define HAS_IRQ_BUG 0x0080 +#define HAS_MMU_BUG 0x0100 + +struct cpu_info { + char *cpu_model; + unsigned short rev; + unsigned short cache_size; + unsigned short flags; +}; + +/* Some of these model are here for historical reasons only. */ +static struct cpu_info cpinfo[] = { + {"ETRAX 1", 0, 0, 0}, + {"ETRAX 2", 1, 0, 0}, + {"ETRAX 3", 2, 0, 0}, + {"ETRAX 4", 3, 0, 0}, + {"Simulator", 7, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA}, + {"ETRAX 100", 8, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_IRQ_BUG}, + {"ETRAX 100", 9, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA}, + + {"ETRAX 100LX", 10, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB + | HAS_MMU | HAS_MMU_BUG}, + + {"ETRAX 100LX v2", 11, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB + | HAS_MMU}, + + {"ETRAX FS", 32, 32, HAS_ETHERNET100 | HAS_ATA | HAS_MMU}, + + {"Unknown", 0, 0, 0} +}; + +int +show_cpuinfo(struct seq_file *m, void *v) +{ + int i; + int cpu = (int)v - 1; + int entries; + unsigned long revision; + struct cpu_info *info; + + entries = sizeof cpinfo / sizeof(struct cpu_info); + info = &cpinfo[entries - 1]; + +#ifdef CONFIG_SMP + if (!cpu_online(cpu)) + return 0; +#endif + + revision = rdvr(); + + for (i = 0; i < entries; i++) { + if (cpinfo[i].rev == revision) { + info = &cpinfo[i]; + break; + } + } + + return seq_printf(m, + "processor\t: %d\n" + "cpu\t\t: CRIS\n" + "cpu revision\t: %lu\n" + "cpu model\t: %s\n" + "cache size\t: %d KB\n" + "fpu\t\t: %s\n" + "mmu\t\t: %s\n" + "mmu DMA bug\t: %s\n" + "ethernet\t: %s Mbps\n" + "token ring\t: %s\n" + "scsi\t\t: %s\n" + "ata\t\t: %s\n" + "usb\t\t: %s\n" + "bogomips\t: %lu.%02lu\n\n", + + cpu, + revision, + info->cpu_model, + info->cache_size, + info->flags & HAS_FPU ? "yes" : "no", + info->flags & HAS_MMU ? "yes" : "no", + info->flags & HAS_MMU_BUG ? "yes" : "no", + info->flags & HAS_ETHERNET100 ? "10/100" : "10", + info->flags & HAS_TOKENRING ? "4/16 Mbps" : "no", + info->flags & HAS_SCSI ? "yes" : "no", + info->flags & HAS_ATA ? "yes" : "no", + info->flags & HAS_USB ? "yes" : "no", + (loops_per_jiffy * HZ + 500) / 500000, + ((loops_per_jiffy * HZ + 500) / 5000) % 100); +} + +#endif /* CONFIG_PROC_FS */ + +void +show_etrax_copyright(void) +{ + printk(KERN_INFO + "Linux/CRISv32 port on ETRAX FS (C) 2003, 2004 Axis Communications AB\n"); +} diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c new file mode 100644 index 000000000000..fb4c79d5b76b --- /dev/null +++ b/arch/cris/arch-v32/kernel/signal.c @@ -0,0 +1,708 @@ +/* + * Copyright (C) 2003, Axis Communications AB. + */ + +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/errno.h> +#include <linux/wait.h> +#include <linux/ptrace.h> +#include <linux/unistd.h> +#include <linux/stddef.h> +#include <linux/syscalls.h> +#include <linux/vmalloc.h> + +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/ucontext.h> +#include <asm/uaccess.h> +#include <asm/arch/ptrace.h> +#include <asm/arch/hwregs/cpu_vect.h> + +extern unsigned long cris_signal_return_page; + +/* Flag to check if a signal is blockable. */ +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +/* + * A syscall in CRIS is really a "break 13" instruction, which is 2 + * bytes. The registers is manipulated so upon return the instruction + * will be executed again. + * + * This relies on that PC points to the instruction after the break call. + */ +#define RESTART_CRIS_SYS(regs) regs->r10 = regs->orig_r10; regs->erp -= 2; + +/* Signal frames. */ +struct signal_frame { + struct sigcontext sc; + unsigned long extramask[_NSIG_WORDS - 1]; + unsigned char retcode[8]; /* Trampoline code. */ +}; + +struct rt_signal_frame { + struct siginfo *pinfo; + void *puc; + struct siginfo info; + struct ucontext uc; + unsigned char retcode[8]; /* Trampoline code. */ +}; + +int do_signal(int restart, sigset_t *oldset, struct pt_regs *regs); +void keep_debug_flags(unsigned long oldccs, unsigned long oldspc, + struct pt_regs *regs); +/* + * Swap in the new signal mask, and wait for a signal. Define some + * dummy arguments to be able to reach the regs argument. + */ +int +sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof, + long srp, struct pt_regs *regs) +{ + sigset_t saveset; + + mask &= _BLOCKABLE; + + spin_lock_irq(¤t->sighand->siglock); + + saveset = current->blocked; + + siginitset(¤t->blocked, mask); + + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + regs->r10 = -EINTR; + + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + + if (do_signal(0, &saveset, regs)) { + /* + * This point is reached twice: once to call + * the signal handler, then again to return + * from the sigsuspend system call. When + * calling the signal handler, R10 hold the + * signal number as set by do_signal(). The + * sigsuspend call will always return with + * the restored value above; -EINTR. + */ + return regs->r10; + } + } +} + +/* Define some dummy arguments to be able to reach the regs argument. */ +int +sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, long r12, long r13, + long mof, long srp, struct pt_regs *regs) +{ + sigset_t saveset; + sigset_t newset; + + if (sigsetsize != sizeof(sigset_t)) + return -EINVAL; + + if (copy_from_user(&newset, unewset, sizeof(newset))) + return -EFAULT; + + sigdelsetmask(&newset, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + + saveset = current->blocked; + current->blocked = newset; + + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + regs->r10 = -EINTR; + + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + + if (do_signal(0, &saveset, regs)) { + /* See comment in function above. */ + return regs->r10; + } + } +} + +int +sys_sigaction(int signal, const struct old_sigaction *act, + struct old_sigaction *oact) +{ + int retval; + struct k_sigaction newk; + struct k_sigaction oldk; + + if (act) { + old_sigset_t mask; + + if (!access_ok(VERIFY_READ, act, sizeof(*act)) || + __get_user(newk.sa.sa_handler, &act->sa_handler) || + __get_user(newk.sa.sa_restorer, &act->sa_restorer)) + return -EFAULT; + + __get_user(newk.sa.sa_flags, &act->sa_flags); + __get_user(mask, &act->sa_mask); + siginitset(&newk.sa.sa_mask, mask); + } + + retval = do_sigaction(signal, act ? &newk : NULL, oact ? &oldk : NULL); + + if (!retval && oact) { + if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || + __put_user(oldk.sa.sa_handler, &oact->sa_handler) || + __put_user(oldk.sa.sa_restorer, &oact->sa_restorer)) + return -EFAULT; + + __put_user(oldk.sa.sa_flags, &oact->sa_flags); + __put_user(oldk.sa.sa_mask.sig[0], &oact->sa_mask); + } + + return retval; +} + +int +sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss) +{ + return do_sigaltstack(uss, uoss, rdusp()); +} + +static int +restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) +{ + unsigned int err = 0; + unsigned long old_usp; + + /* Always make any pending restarted system calls return -EINTR */ + current_thread_info()->restart_block.fn = do_no_restart_syscall; + + /* + * Restore the registers from &sc->regs. sc is already checked + * for VERIFY_READ since the signal_frame was previously + * checked in sys_sigreturn(). + */ + if (__copy_from_user(regs, sc, sizeof(struct pt_regs))) + goto badframe; + + /* Make that the user-mode flag is set. */ + regs->ccs |= (1 << (U_CCS_BITNR + CCS_SHIFT)); + + /* Restore the old USP. */ + err |= __get_user(old_usp, &sc->usp); + wrusp(old_usp); + + return err; + +badframe: + return 1; +} + +/* Define some dummy arguments to be able to reach the regs argument. */ +asmlinkage int +sys_sigreturn(long r10, long r11, long r12, long r13, long mof, long srp, + struct pt_regs *regs) +{ + sigset_t set; + struct signal_frame __user *frame; + unsigned long oldspc = regs->spc; + unsigned long oldccs = regs->ccs; + + frame = (struct signal_frame *) rdusp(); + + /* + * Since the signal is stacked on a dword boundary, the frame + * should be dword aligned here as well. It it's not, then the + * user is trying some funny business. + */ + if (((long)frame) & 3) + goto badframe; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + + if (__get_user(set.sig[0], &frame->sc.oldmask) || + (_NSIG_WORDS > 1 && __copy_from_user(&set.sig[1], + frame->extramask, + sizeof(frame->extramask)))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + + current->blocked = set; + + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->sc)) + goto badframe; + + keep_debug_flags(oldccs, oldspc, regs); + + return regs->r10; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +/* Define some dummy variables to be able to reach the regs argument. */ +asmlinkage int +sys_rt_sigreturn(long r10, long r11, long r12, long r13, long mof, long srp, + struct pt_regs *regs) +{ + sigset_t set; + struct rt_signal_frame __user *frame; + unsigned long oldspc = regs->spc; + unsigned long oldccs = regs->ccs; + + frame = (struct rt_signal_frame *) rdusp(); + + /* + * Since the signal is stacked on a dword boundary, the frame + * should be dword aligned here as well. It it's not, then the + * user is trying some funny business. + */ + if (((long)frame) & 3) + goto badframe; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + + current->blocked = set; + + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) + goto badframe; + + if (do_sigaltstack(&frame->uc.uc_stack, NULL, rdusp()) == -EFAULT) + goto badframe; + + keep_debug_flags(oldccs, oldspc, regs); + + return regs->r10; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +/* Setup a signal frame. */ +static int +setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, + unsigned long mask) +{ + int err; + unsigned long usp; + + err = 0; + usp = rdusp(); + + /* + * Copy the registers. They are located first in sc, so it's + * possible to use sc directly. + */ + err |= __copy_to_user(sc, regs, sizeof(struct pt_regs)); + + err |= __put_user(mask, &sc->oldmask); + err |= __put_user(usp, &sc->usp); + + return err; +} + +/* Figure out where to put the new signal frame - usually on the stack. */ +static inline void __user * +get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size) +{ + unsigned long sp; + + sp = rdusp(); + + /* This is the X/Open sanctioned signal stack switching. */ + if (ka->sa.sa_flags & SA_ONSTACK) { + if (!on_sig_stack(sp)) + sp = current->sas_ss_sp + current->sas_ss_size; + } + + /* Make sure the frame is dword-aligned. */ + sp &= ~3; + + return (void __user *)(sp - frame_size); +} + +/* Grab and setup a signal frame. + * + * Basically a lot of state-info is stacked, and arranged for the + * user-mode program to return to the kernel using either a trampiline + * which performs the syscall sigreturn(), or a provided user-mode + * trampoline. + */ +static void +setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, + struct pt_regs * regs) +{ + int err; + unsigned long return_ip; + struct signal_frame __user *frame; + + err = 0; + frame = get_sigframe(ka, regs, sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + err |= setup_sigcontext(&frame->sc, regs, set->sig[0]); + + if (err) + goto give_sigsegv; + + if (_NSIG_WORDS > 1) { + err |= __copy_to_user(frame->extramask, &set->sig[1], + sizeof(frame->extramask)); + } + + if (err) + goto give_sigsegv; + + /* + * Set up to return from user-space. If provided, use a stub + * already located in user-space. + */ + if (ka->sa.sa_flags & SA_RESTORER) { + return_ip = (unsigned long)ka->sa.sa_restorer; + } else { + /* Trampoline - the desired return ip is in the signal return page. */ + return_ip = cris_signal_return_page; + + /* + * This is movu.w __NR_sigreturn, r9; break 13; + * + * WE DO NOT USE IT ANY MORE! It's only left here for historical + * reasons and because gdb uses it as a signature to notice + * signal handler stack frames. + */ + err |= __put_user(0x9c5f, (short __user*)(frame->retcode+0)); + err |= __put_user(__NR_sigreturn, (short __user*)(frame->retcode+2)); + err |= __put_user(0xe93d, (short __user*)(frame->retcode+4)); + } + + if (err) + goto give_sigsegv; + + /* + * Set up registers for signal handler. + * + * Where the code enters now. + * Where the code enter later. + * First argument, signo. + */ + regs->erp = (unsigned long) ka->sa.sa_handler; + regs->srp = return_ip; + regs->r10 = sig; + + /* Actually move the USP to reflect the stacked frame. */ + wrusp((unsigned long)frame); + + return; + +give_sigsegv: + if (sig == SIGSEGV) + ka->sa.sa_handler = SIG_DFL; + + force_sig(SIGSEGV, current); +} + +static void +setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs * regs) +{ + int err; + unsigned long return_ip; + struct rt_signal_frame __user *frame; + + err = 0; + frame = get_sigframe(ka, regs, sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + /* TODO: what is the current->exec_domain stuff and invmap ? */ + + err |= __put_user(&frame->info, &frame->pinfo); + err |= __put_user(&frame->uc, &frame->puc); + err |= copy_siginfo_to_user(&frame->info, info); + + if (err) + goto give_sigsegv; + + /* Clear all the bits of the ucontext we don't use. */ + err |= __clear_user(&frame->uc, offsetof(struct ucontext, uc_mcontext)); + err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]); + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + if (err) + goto give_sigsegv; + + /* + * Set up to return from user-space. If provided, use a stub + * already located in user-space. + */ + if (ka->sa.sa_flags & SA_RESTORER) { + return_ip = (unsigned long) ka->sa.sa_restorer; + } else { + /* Trampoline - the desired return ip is in the signal return page. */ + return_ip = cris_signal_return_page + 6; + + /* + * This is movu.w __NR_rt_sigreturn, r9; break 13; + * + * WE DO NOT USE IT ANY MORE! It's only left here for historical + * reasons and because gdb uses it as a signature to notice + * signal handler stack frames. + */ + err |= __put_user(0x9c5f, (short __user*)(frame->retcode+0)); + + err |= __put_user(__NR_rt_sigreturn, + (short __user*)(frame->retcode+2)); + + err |= __put_user(0xe93d, (short __user*)(frame->retcode+4)); + } + + if (err) + goto give_sigsegv; + + /* + * Set up registers for signal handler. + * + * Where the code enters now. + * Where the code enters later. + * First argument is signo. + * Second argument is (siginfo_t *). + * Third argument is unused. + */ + regs->erp = (unsigned long) ka->sa.sa_handler; + regs->srp = return_ip; + regs->r10 = sig; + regs->r11 = (unsigned long) &frame->info; + regs->r12 = 0; + + /* Actually move the usp to reflect the stacked frame. */ + wrusp((unsigned long)frame); + + return; + +give_sigsegv: + if (sig == SIGSEGV) + ka->sa.sa_handler = SIG_DFL; + + force_sig(SIGSEGV, current); +} + +/* Invoke a singal handler to, well, handle the signal. */ +extern inline void +handle_signal(int canrestart, unsigned long sig, + siginfo_t *info, struct k_sigaction *ka, + sigset_t *oldset, struct pt_regs * regs) +{ + /* Check if this got called from a system call. */ + if (canrestart) { + /* If so, check system call restarting. */ + switch (regs->r10) { + case -ERESTART_RESTARTBLOCK: + case -ERESTARTNOHAND: + /* + * This means that the syscall should + * only be restarted if there was no + * handler for the signal, and since + * this point isn't reached unless + * there is a handler, there's no need + * to restart. + */ + regs->r10 = -EINTR; + break; + + case -ERESTARTSYS: + /* + * This means restart the syscall if + * there is no handler, or the handler + * was registered with SA_RESTART. + */ + if (!(ka->sa.sa_flags & SA_RESTART)) { + regs->r10 = -EINTR; + break; + } + + /* Fall through. */ + + case -ERESTARTNOINTR: + /* + * This means that the syscall should + * be called again after the signal + * handler returns. + */ + RESTART_CRIS_SYS(regs); + break; + } + } + + /* Set up the stack frame. */ + if (ka->sa.sa_flags & SA_SIGINFO) + setup_rt_frame(sig, ka, info, oldset, regs); + else + setup_frame(sig, ka, oldset, regs); + + if (ka->sa.sa_flags & SA_ONESHOT) + ka->sa.sa_handler = SIG_DFL; + + if (!(ka->sa.sa_flags & SA_NODEFER)) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + sigaddset(¤t->blocked,sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } +} + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + * + * Also note that the regs structure given here as an argument, is the latest + * pushed pt_regs. It may or may not be the same as the first pushed registers + * when the initial usermode->kernelmode transition took place. Therefore + * we can use user_mode(regs) to see if we came directly from kernel or user + * mode below. + */ +int +do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs) +{ + int signr; + siginfo_t info; + struct k_sigaction ka; + + /* + * The common case should go fast, which is why this point is + * reached from kernel-mode. If that's the case, just return + * without doing anything. + */ + if (!user_mode(regs)) + return 1; + + if (!oldset) + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); + + if (signr > 0) { + /* Deliver the signal. */ + handle_signal(canrestart, signr, &info, &ka, oldset, regs); + return 1; + } + + /* Got here from a system call? */ + if (canrestart) { + /* Restart the system call - no handlers present. */ + if (regs->r10 == -ERESTARTNOHAND || + regs->r10 == -ERESTARTSYS || + regs->r10 == -ERESTARTNOINTR) { + RESTART_CRIS_SYS(regs); + } + + if (regs->r10 == -ERESTART_RESTARTBLOCK){ + regs->r10 = __NR_restart_syscall; + regs->erp -= 2; + } + } + + return 0; +} + +asmlinkage void +ugdb_trap_user(struct thread_info *ti, int sig) +{ + if (((user_regs(ti)->exs & 0xff00) >> 8) != SINGLE_STEP_INTR_VECT) { + /* Zero single-step PC if the reason we stopped wasn't a single + step exception. This is to avoid relying on it when it isn't + reliable. */ + user_regs(ti)->spc = 0; + } + /* FIXME: Filter out false h/w breakpoint hits (i.e. EDA + not withing any configured h/w breakpoint range). Synchronize with + what already exists for kernel debugging. */ + if (((user_regs(ti)->exs & 0xff00) >> 8) == BREAK_8_INTR_VECT) { + /* Break 8: subtract 2 from ERP unless in a delay slot. */ + if (!(user_regs(ti)->erp & 0x1)) + user_regs(ti)->erp -= 2; + } + sys_kill(ti->task->pid, sig); +} + +void +keep_debug_flags(unsigned long oldccs, unsigned long oldspc, + struct pt_regs *regs) +{ + if (oldccs & (1 << Q_CCS_BITNR)) { + /* Pending single step due to single-stepping the break 13 + in the signal trampoline: keep the Q flag. */ + regs->ccs |= (1 << Q_CCS_BITNR); + /* S flag should be set - complain if it's not. */ + if (!(oldccs & (1 << (S_CCS_BITNR + CCS_SHIFT)))) { + printk("Q flag but no S flag?"); + } + regs->ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT)); + /* Assume the SPC is valid and interesting. */ + regs->spc = oldspc; + + } else if (oldccs & (1 << (S_CCS_BITNR + CCS_SHIFT))) { + /* If a h/w bp was set in the signal handler we need + to keep the S flag. */ + regs->ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT)); + /* Don't keep the old SPC though; if we got here due to + a single-step, the Q flag should have been set. */ + } else if (regs->spc) { + /* If we were single-stepping *before* the signal was taken, + we don't want to restore that state now, because GDB will + have forgotten all about it. */ + regs->spc = 0; + regs->ccs &= ~(1 << (S_CCS_BITNR + CCS_SHIFT)); + } +} + +/* Set up the trampolines on the signal return page. */ +int __init +cris_init_signal(void) +{ + u16* data = (u16*)kmalloc(PAGE_SIZE, GFP_KERNEL); + + /* This is movu.w __NR_sigreturn, r9; break 13; */ + data[0] = 0x9c5f; + data[1] = __NR_sigreturn; + data[2] = 0xe93d; + /* This is movu.w __NR_rt_sigreturn, r9; break 13; */ + data[3] = 0x9c5f; + data[4] = __NR_rt_sigreturn; + data[5] = 0xe93d; + + /* Map to userspace with appropriate permissions (no write access...) */ + cris_signal_return_page = (unsigned long) + __ioremap_prot(virt_to_phys(data), PAGE_SIZE, PAGE_SIGNAL_TRAMPOLINE); + + return 0; +} + +__initcall(cris_init_signal); diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c new file mode 100644 index 000000000000..2c5cae04a95c --- /dev/null +++ b/arch/cris/arch-v32/kernel/smp.c @@ -0,0 +1,348 @@ +#include <asm/delay.h> +#include <asm/arch/irq.h> +#include <asm/arch/hwregs/intr_vect.h> +#include <asm/arch/hwregs/intr_vect_defs.h> +#include <asm/tlbflush.h> +#include <asm/mmu_context.h> +#include <asm/arch/hwregs/mmu_defs_asm.h> +#include <asm/arch/hwregs/supp_reg.h> +#include <asm/atomic.h> + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/timex.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/cpumask.h> +#include <linux/interrupt.h> + +#define IPI_SCHEDULE 1 +#define IPI_CALL 2 +#define IPI_FLUSH_TLB 4 + +#define FLUSH_ALL (void*)0xffffffff + +/* Vector of locks used for various atomic operations */ +spinlock_t cris_atomic_locks[] = { [0 ... LOCK_COUNT - 1] = SPIN_LOCK_UNLOCKED}; + +/* CPU masks */ +cpumask_t cpu_online_map = CPU_MASK_NONE; +cpumask_t phys_cpu_present_map = CPU_MASK_NONE; + +/* Variables used during SMP boot */ +volatile int cpu_now_booting = 0; +volatile struct thread_info *smp_init_current_idle_thread; + +/* Variables used during IPI */ +static DEFINE_SPINLOCK(call_lock); +static DEFINE_SPINLOCK(tlbstate_lock); + +struct call_data_struct { + void (*func) (void *info); + void *info; + int wait; +}; + +static struct call_data_struct * call_data; + +static struct mm_struct* flush_mm; +static struct vm_area_struct* flush_vma; +static unsigned long flush_addr; + +extern int setup_irq(int, struct irqaction *); + +/* Mode registers */ +static unsigned long irq_regs[NR_CPUS] = +{ + regi_irq, + regi_irq2 +}; + +static irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs); +static int send_ipi(int vector, int wait, cpumask_t cpu_mask); +static struct irqaction irq_ipi = { crisv32_ipi_interrupt, SA_INTERRUPT, + CPU_MASK_NONE, "ipi", NULL, NULL}; + +extern void cris_mmu_init(void); +extern void cris_timer_init(void); + +/* SMP initialization */ +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + int i; + + /* From now on we can expect IPIs so set them up */ + setup_irq(IPI_INTR_VECT, &irq_ipi); + + /* Mark all possible CPUs as present */ + for (i = 0; i < max_cpus; i++) + cpu_set(i, phys_cpu_present_map); +} + +void __devinit smp_prepare_boot_cpu(void) +{ + /* PGD pointer has moved after per_cpu initialization so + * update the MMU. + */ + pgd_t **pgd; + pgd = (pgd_t**)&per_cpu(current_pgd, smp_processor_id()); + + SUPP_BANK_SEL(1); + SUPP_REG_WR(RW_MM_TLB_PGD, pgd); + SUPP_BANK_SEL(2); + SUPP_REG_WR(RW_MM_TLB_PGD, pgd); + + cpu_set(0, cpu_online_map); + cpu_set(0, phys_cpu_present_map); +} + +void __init smp_cpus_done(unsigned int max_cpus) +{ +} + +/* Bring one cpu online.*/ +static int __init +smp_boot_one_cpu(int cpuid) +{ + unsigned timeout; + struct task_struct *idle; + + idle = fork_idle(cpuid); + if (IS_ERR(idle)) + panic("SMP: fork failed for CPU:%d", cpuid); + + idle->thread_info->cpu = cpuid; + + /* Information to the CPU that is about to boot */ + smp_init_current_idle_thread = idle->thread_info; + cpu_now_booting = cpuid; + + /* Wait for CPU to come online */ + for (timeout = 0; timeout < 10000; timeout++) { + if(cpu_online(cpuid)) { + cpu_now_booting = 0; + smp_init_current_idle_thread = NULL; + return 0; /* CPU online */ + } + udelay(100); + barrier(); + } + + put_task_struct(idle); + idle = NULL; + + printk(KERN_CRIT "SMP: CPU:%d is stuck.\n", cpuid); + return -1; +} + +/* Secondary CPUs starts uing C here. Here we need to setup CPU + * specific stuff such as the local timer and the MMU. */ +void __init smp_callin(void) +{ + extern void cpu_idle(void); + + int cpu = cpu_now_booting; + reg_intr_vect_rw_mask vect_mask = {0}; + + /* Initialise the idle task for this CPU */ + atomic_inc(&init_mm.mm_count); + current->active_mm = &init_mm; + + /* Set up MMU */ + cris_mmu_init(); + __flush_tlb_all(); + + /* Setup local timer. */ + cris_timer_init(); + + /* Enable IRQ and idle */ + REG_WR(intr_vect, irq_regs[cpu], rw_mask, vect_mask); + unmask_irq(IPI_INTR_VECT); + unmask_irq(TIMER_INTR_VECT); + local_irq_enable(); + + cpu_set(cpu, cpu_online_map); + cpu_idle(); +} + +/* Stop execution on this CPU.*/ +void stop_this_cpu(void* dummy) +{ + local_irq_disable(); + asm volatile("halt"); +} + +/* Other calls */ +void smp_send_stop(void) +{ + smp_call_function(stop_this_cpu, NULL, 1, 0); +} + +int setup_profiling_timer(unsigned int multiplier) +{ + return -EINVAL; +} + + +/* cache_decay_ticks is used by the scheduler to decide if a process + * is "hot" on one CPU. A higher value means a higher penalty to move + * a process to another CPU. Our cache is rather small so we report + * 1 tick. + */ +unsigned long cache_decay_ticks = 1; + +int __devinit __cpu_up(unsigned int cpu) +{ + smp_boot_one_cpu(cpu); + return cpu_online(cpu) ? 0 : -ENOSYS; +} + +void smp_send_reschedule(int cpu) +{ + cpumask_t cpu_mask = CPU_MASK_NONE; + cpu_set(cpu, cpu_mask); + send_ipi(IPI_SCHEDULE, 0, cpu_mask); +} + +/* TLB flushing + * + * Flush needs to be done on the local CPU and on any other CPU that + * may have the same mapping. The mm->cpu_vm_mask is used to keep track + * of which CPUs that a specific process has been executed on. + */ +void flush_tlb_common(struct mm_struct* mm, struct vm_area_struct* vma, unsigned long addr) +{ + unsigned long flags; + cpumask_t cpu_mask; + + spin_lock_irqsave(&tlbstate_lock, flags); + cpu_mask = (mm == FLUSH_ALL ? CPU_MASK_ALL : mm->cpu_vm_mask); + cpu_clear(smp_processor_id(), cpu_mask); + flush_mm = mm; + flush_vma = vma; + flush_addr = addr; + send_ipi(IPI_FLUSH_TLB, 1, cpu_mask); + spin_unlock_irqrestore(&tlbstate_lock, flags); +} + +void flush_tlb_all(void) +{ + __flush_tlb_all(); + flush_tlb_common(FLUSH_ALL, FLUSH_ALL, 0); +} + +void flush_tlb_mm(struct mm_struct *mm) +{ + __flush_tlb_mm(mm); + flush_tlb_common(mm, FLUSH_ALL, 0); + /* No more mappings in other CPUs */ + cpus_clear(mm->cpu_vm_mask); + cpu_set(smp_processor_id(), mm->cpu_vm_mask); +} + +void flush_tlb_page(struct vm_area_struct *vma, + unsigned long addr) +{ + __flush_tlb_page(vma, addr); + flush_tlb_common(vma->vm_mm, vma, addr); +} + +/* Inter processor interrupts + * + * The IPIs are used for: + * * Force a schedule on a CPU + * * FLush TLB on other CPUs + * * Call a function on other CPUs + */ + +int send_ipi(int vector, int wait, cpumask_t cpu_mask) +{ + int i = 0; + reg_intr_vect_rw_ipi ipi = REG_RD(intr_vect, irq_regs[i], rw_ipi); + int ret = 0; + + /* Calculate CPUs to send to. */ + cpus_and(cpu_mask, cpu_mask, cpu_online_map); + + /* Send the IPI. */ + for_each_cpu_mask(i, cpu_mask) + { + ipi.vector |= vector; + REG_WR(intr_vect, irq_regs[i], rw_ipi, ipi); + } + + /* Wait for IPI to finish on other CPUS */ + if (wait) { + for_each_cpu_mask(i, cpu_mask) { + int j; + for (j = 0 ; j < 1000; j++) { + ipi = REG_RD(intr_vect, irq_regs[i], rw_ipi); + if (!ipi.vector) + break; + udelay(100); + } + + /* Timeout? */ + if (ipi.vector) { + printk("SMP call timeout from %d to %d\n", smp_processor_id(), i); + ret = -ETIMEDOUT; + dump_stack(); + } + } + } + return ret; +} + +/* + * You must not call this function with disabled interrupts or from a + * hardware interrupt handler or from a bottom half handler. + */ +int smp_call_function(void (*func)(void *info), void *info, + int nonatomic, int wait) +{ + cpumask_t cpu_mask = CPU_MASK_ALL; + struct call_data_struct data; + int ret; + + cpu_clear(smp_processor_id(), cpu_mask); + + WARN_ON(irqs_disabled()); + + data.func = func; + data.info = info; + data.wait = wait; + + spin_lock(&call_lock); + call_data = &data; + ret = send_ipi(IPI_CALL, wait, cpu_mask); + spin_unlock(&call_lock); + + return ret; +} + +irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + void (*func) (void *info) = call_data->func; + void *info = call_data->info; + reg_intr_vect_rw_ipi ipi; + + ipi = REG_RD(intr_vect, irq_regs[smp_processor_id()], rw_ipi); + + if (ipi.vector & IPI_CALL) { + func(info); + } + if (ipi.vector & IPI_FLUSH_TLB) { + if (flush_mm == FLUSH_ALL) + __flush_tlb_all(); + else if (flush_vma == FLUSH_ALL) + __flush_tlb_mm(flush_mm); + else + __flush_tlb_page(flush_vma, flush_addr); + } + + ipi.vector = 0; + REG_WR(intr_vect, irq_regs[smp_processor_id()], rw_ipi, ipi); + + return IRQ_HANDLED; +} + diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c new file mode 100644 index 000000000000..d48e397f5fa4 --- /dev/null +++ b/arch/cris/arch-v32/kernel/time.c @@ -0,0 +1,341 @@ +/* $Id: time.c,v 1.19 2005/04/29 05:40:09 starvik Exp $ + * + * linux/arch/cris/arch-v32/kernel/time.c + * + * Copyright (C) 2003 Axis Communications AB + * + */ + +#include <linux/config.h> +#include <linux/timex.h> +#include <linux/time.h> +#include <linux/jiffies.h> +#include <linux/interrupt.h> +#include <linux/swap.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/threads.h> +#include <asm/types.h> +#include <asm/signal.h> +#include <asm/io.h> +#include <asm/delay.h> +#include <asm/rtc.h> +#include <asm/irq.h> + +#include <asm/arch/hwregs/reg_map.h> +#include <asm/arch/hwregs/reg_rdwr.h> +#include <asm/arch/hwregs/timer_defs.h> +#include <asm/arch/hwregs/intr_vect_defs.h> + +/* Watchdog defines */ +#define ETRAX_WD_KEY_MASK 0x7F /* key is 7 bit */ +#define ETRAX_WD_HZ 763 /* watchdog counts at 763 Hz */ +#define ETRAX_WD_CNT ((2*ETRAX_WD_HZ)/HZ + 1) /* Number of 763 counts before watchdog bites */ + +unsigned long timer_regs[NR_CPUS] = +{ + regi_timer, +#ifdef CONFIG_SMP + regi_timer2 +#endif +}; + +extern void update_xtime_from_cmos(void); +extern int set_rtc_mmss(unsigned long nowtime); +extern int setup_irq(int, struct irqaction *); +extern int have_rtc; + +unsigned long get_ns_in_jiffie(void) +{ + reg_timer_r_tmr0_data data; + unsigned long ns; + + data = REG_RD(timer, regi_timer, r_tmr0_data); + ns = (TIMER0_DIV - data) * 10; + return ns; +} + +unsigned long do_slow_gettimeoffset(void) +{ + unsigned long count; + unsigned long usec_count = 0; + + static unsigned long count_p = TIMER0_DIV;/* for the first call after boot */ + static unsigned long jiffies_p = 0; + + /* + * cache volatile jiffies temporarily; we have IRQs turned off. + */ + unsigned long jiffies_t; + + /* The timer interrupt comes from Etrax timer 0. In order to get + * better precision, we check the current value. It might have + * underflowed already though. + */ + + count = REG_RD(timer, regi_timer, r_tmr0_data); + jiffies_t = jiffies; + + /* + * avoiding timer inconsistencies (they are rare, but they happen)... + * there are one problem that must be avoided here: + * 1. the timer counter underflows + */ + if( jiffies_t == jiffies_p ) { + if( count > count_p ) { + /* Timer wrapped, use new count and prescale + * increase the time corresponding to one jiffie + */ + usec_count = 1000000/HZ; + } + } else + jiffies_p = jiffies_t; + count_p = count; + /* Convert timer value to usec */ + /* 100 MHz timer, divide by 100 to get usec */ + usec_count += (TIMER0_DIV - count) / 100; + return usec_count; +} + +/* From timer MDS describing the hardware watchdog: + * 4.3.1 Watchdog Operation + * The watchdog timer is an 8-bit timer with a configurable start value. + * Once started the whatchdog counts downwards with a frequency of 763 Hz + * (100/131072 MHz). When the watchdog counts down to 1, it generates an + * NMI (Non Maskable Interrupt), and when it counts down to 0, it resets the + * chip. + */ +/* This gives us 1.3 ms to do something useful when the NMI comes */ + +/* right now, starting the watchdog is the same as resetting it */ +#define start_watchdog reset_watchdog + +#if defined(CONFIG_ETRAX_WATCHDOG) +static short int watchdog_key = 42; /* arbitrary 7 bit number */ +#endif + +/* number of pages to consider "out of memory". it is normal that the memory + * is used though, so put this really low. + */ + +#define WATCHDOG_MIN_FREE_PAGES 8 + +void +reset_watchdog(void) +{ +#if defined(CONFIG_ETRAX_WATCHDOG) + reg_timer_rw_wd_ctrl wd_ctrl = { 0 }; + + /* only keep watchdog happy as long as we have memory left! */ + if(nr_free_pages() > WATCHDOG_MIN_FREE_PAGES) { + /* reset the watchdog with the inverse of the old key */ + watchdog_key ^= ETRAX_WD_KEY_MASK; /* invert key, which is 7 bits */ + wd_ctrl.cnt = ETRAX_WD_CNT; + wd_ctrl.cmd = regk_timer_start; + wd_ctrl.key = watchdog_key; + REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl); + } +#endif +} + +/* stop the watchdog - we still need the correct key */ + +void +stop_watchdog(void) +{ +#if defined(CONFIG_ETRAX_WATCHDOG) + reg_timer_rw_wd_ctrl wd_ctrl = { 0 }; + watchdog_key ^= ETRAX_WD_KEY_MASK; /* invert key, which is 7 bits */ + wd_ctrl.cnt = ETRAX_WD_CNT; + wd_ctrl.cmd = regk_timer_stop; + wd_ctrl.key = watchdog_key; + REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl); +#endif +} + +extern void show_registers(struct pt_regs *regs); + +void +handle_watchdog_bite(struct pt_regs* regs) +{ +#if defined(CONFIG_ETRAX_WATCHDOG) + extern int cause_of_death; + + raw_printk("Watchdog bite\n"); + + /* Check if forced restart or unexpected watchdog */ + if (cause_of_death == 0xbedead) { + while(1); + } + + /* Unexpected watchdog, stop the watchdog and dump registers*/ + stop_watchdog(); + raw_printk("Oops: bitten by watchdog\n"); + show_registers(regs); +#ifndef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY + reset_watchdog(); +#endif + while(1) /* nothing */; +#endif +} + +/* last time the cmos clock got updated */ +static long last_rtc_update = 0; + +/* + * timer_interrupt() needs to keep up the real-time clock, + * as well as call the "do_timer()" routine every clocktick + */ + +//static unsigned short myjiff; /* used by our debug routine print_timestamp */ + +extern void cris_do_profile(struct pt_regs *regs); + +static inline irqreturn_t +timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + reg_timer_r_masked_intr masked_intr; + reg_timer_rw_ack_intr ack_intr = { 0 }; + + /* Check if the timer interrupt is for us (a tmr0 int) */ + masked_intr = REG_RD(timer, timer_regs[cpu], r_masked_intr); + if (!masked_intr.tmr0) + return IRQ_NONE; + + /* acknowledge the timer irq */ + ack_intr.tmr0 = 1; + REG_WR(timer, timer_regs[cpu], rw_ack_intr, ack_intr); + + /* reset watchdog otherwise it resets us! */ + reset_watchdog(); + + /* Update statistics. */ + update_process_times(user_mode(regs)); + + cris_do_profile(regs); /* Save profiling information */ + + /* The master CPU is responsible for the time keeping. */ + if (cpu != 0) + return IRQ_HANDLED; + + /* call the real timer interrupt handler */ + do_timer(regs); + + /* + * If we have an externally synchronized Linux clock, then update + * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be + * called as close as possible to 500 ms before the new second starts. + * + * The division here is not time critical since it will run once in + * 11 minutes + */ + if ((time_status & STA_UNSYNC) == 0 && + xtime.tv_sec > last_rtc_update + 660 && + (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 && + (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) { + if (set_rtc_mmss(xtime.tv_sec) == 0) + last_rtc_update = xtime.tv_sec; + else + last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */ + } + return IRQ_HANDLED; +} + +/* timer is SA_SHIRQ so drivers can add stuff to the timer irq chain + * it needs to be SA_INTERRUPT to make the jiffies update work properly + */ + +static struct irqaction irq_timer = { timer_interrupt, SA_SHIRQ | SA_INTERRUPT, + CPU_MASK_NONE, "timer", NULL, NULL}; + +void __init +cris_timer_init(void) +{ + int cpu = smp_processor_id(); + reg_timer_rw_tmr0_ctrl tmr0_ctrl = { 0 }; + reg_timer_rw_tmr0_div tmr0_div = TIMER0_DIV; + reg_timer_rw_intr_mask timer_intr_mask; + + /* Setup the etrax timers + * Base frequency is 100MHz, divider 1000000 -> 100 HZ + * We use timer0, so timer1 is free. + * The trig timer is used by the fasttimer API if enabled. + */ + + tmr0_ctrl.op = regk_timer_ld; + tmr0_ctrl.freq = regk_timer_f100; + REG_WR(timer, timer_regs[cpu], rw_tmr0_div, tmr0_div); + REG_WR(timer, timer_regs[cpu], rw_tmr0_ctrl, tmr0_ctrl); /* Load */ + tmr0_ctrl.op = regk_timer_run; + REG_WR(timer, timer_regs[cpu], rw_tmr0_ctrl, tmr0_ctrl); /* Start */ + + /* enable the timer irq */ + timer_intr_mask = REG_RD(timer, timer_regs[cpu], rw_intr_mask); + timer_intr_mask.tmr0 = 1; + REG_WR(timer, timer_regs[cpu], rw_intr_mask, timer_intr_mask); +} + +void __init +time_init(void) +{ + reg_intr_vect_rw_mask intr_mask; + + /* probe for the RTC and read it if it exists + * Before the RTC can be probed the loops_per_usec variable needs + * to be initialized to make usleep work. A better value for + * loops_per_usec is calculated by the kernel later once the + * clock has started. + */ + loops_per_usec = 50; + + if(RTC_INIT() < 0) { + /* no RTC, start at 1980 */ + xtime.tv_sec = 0; + xtime.tv_nsec = 0; + have_rtc = 0; + } else { + /* get the current time */ + have_rtc = 1; + update_xtime_from_cmos(); + } + + /* + * Initialize wall_to_monotonic such that adding it to xtime will yield zero, the + * tv_nsec field must be normalized (i.e., 0 <= nsec < NSEC_PER_SEC). + */ + set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); + + /* Start CPU local timer */ + cris_timer_init(); + + /* enable the timer irq in global config */ + intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); + intr_mask.timer = 1; + REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); + + /* now actually register the timer irq handler that calls timer_interrupt() */ + + setup_irq(TIMER_INTR_VECT, &irq_timer); + + /* enable watchdog if we should use one */ + +#if defined(CONFIG_ETRAX_WATCHDOG) + printk("Enabling watchdog...\n"); + start_watchdog(); + + /* If we use the hardware watchdog, we want to trap it as an NMI + and dump registers before it resets us. For this to happen, we + must set the "m" NMI enable flag (which once set, is unset only + when an NMI is taken). + + The same goes for the external NMI, but that doesn't have any + driver or infrastructure support yet. */ + { + unsigned long flags; + local_save_flags(flags); + flags |= (1<<30); /* NMI M flag is at bit 30 */ + local_irq_restore(flags); + } +#endif +} diff --git a/arch/cris/arch-v32/kernel/traps.c b/arch/cris/arch-v32/kernel/traps.c new file mode 100644 index 000000000000..6e3787045560 --- /dev/null +++ b/arch/cris/arch-v32/kernel/traps.c @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2003, Axis Communications AB. + */ + +#include <linux/config.h> +#include <linux/ptrace.h> +#include <asm/uaccess.h> + +#include <asm/arch/hwregs/supp_reg.h> + +extern void reset_watchdog(void); +extern void stop_watchdog(void); + +extern int raw_printk(const char *fmt, ...); + +void +show_registers(struct pt_regs *regs) +{ + /* + * It's possible to use either the USP register or current->thread.usp. + * USP might not correspond to the current proccess for all cases this + * function is called, and current->thread.usp isn't up to date for the + * current proccess. Experience shows that using USP is the way to go. + */ + unsigned long usp; + unsigned long d_mmu_cause; + unsigned long i_mmu_cause; + + usp = rdusp(); + + raw_printk("CPU: %d\n", smp_processor_id()); + + raw_printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n", + regs->erp, regs->srp, regs->ccs, usp, regs->mof); + + raw_printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", + regs->r0, regs->r1, regs->r2, regs->r3); + + raw_printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", + regs->r4, regs->r5, regs->r6, regs->r7); + + raw_printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", + regs->r8, regs->r9, regs->r10, regs->r11); + + raw_printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n", + regs->r12, regs->r13, regs->orig_r10, regs->acr); + + raw_printk("sp: %08lx\n", regs); + + SUPP_BANK_SEL(BANK_IM); + SUPP_REG_RD(RW_MM_CAUSE, i_mmu_cause); + + SUPP_BANK_SEL(BANK_DM); + SUPP_REG_RD(RW_MM_CAUSE, d_mmu_cause); + + raw_printk(" Data MMU Cause: %08lx\n", d_mmu_cause); + raw_printk("Instruction MMU Cause: %08lx\n", i_mmu_cause); + + raw_printk("Process %s (pid: %d, stackpage: %08lx)\n", + current->comm, current->pid, (unsigned long) current); + + /* Show additional info if in kernel-mode. */ + if (!user_mode(regs)) { + int i; + unsigned char c; + + show_stack(NULL, (unsigned long *) usp); + + /* + * If the previous stack-dump wasn't a kernel one, dump the + * kernel stack now. + */ + if (usp != 0) + show_stack(NULL, NULL); + + raw_printk("\nCode: "); + + if (regs->erp < PAGE_OFFSET) + goto bad_value; + + /* + * Quite often the value at regs->erp doesn't point to the + * interesting instruction, which often is the previous + * instruction. So dump at an offset large enough that the + * instruction decoding should be in sync at the interesting + * point, but small enough to fit on a row. The regs->erp + * location is pointed out in a ksymoops-friendly way by + * wrapping the byte for that address in parenthesis. + */ + for (i = -12; i < 12; i++) { + if (__get_user(c, &((unsigned char *) regs->erp)[i])) { +bad_value: + raw_printk(" Bad IP value."); + break; + } + + if (i == 0) + raw_printk("(%02x) ", c); + else + raw_printk("%02x ", c); + } + + raw_printk("\n"); + } +} + +/* + * This gets called from entry.S when the watchdog has bitten. Show something + * similiar to an Oops dump, and if the kernel if configured to be a nice doggy; + * halt instead of reboot. + */ +void +watchdog_bite_hook(struct pt_regs *regs) +{ +#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY + local_irq_disable(); + stop_watchdog(); + show_registers(regs); + + while (1) + ; /* Do nothing. */ +#else + show_registers(regs); +#endif +} + +/* This is normally the Oops function. */ +void +die_if_kernel(const char *str, struct pt_regs *regs, long err) +{ + if (user_mode(regs)) + return; + +#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY + /* + * This printout might take too long and could trigger + * the watchdog normally. If NICE_DOGGY is set, simply + * stop the watchdog during the printout. + */ + stop_watchdog(); +#endif + + raw_printk("%s: %04lx\n", str, err & 0xffff); + + show_registers(regs); + +#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY + reset_watchdog(); +#endif + + do_exit(SIGSEGV); +} + +void arch_enable_nmi(void) +{ + unsigned long flags; + local_save_flags(flags); + flags |= (1<<30); /* NMI M flag is at bit 30 */ + local_irq_restore(flags); +} diff --git a/arch/cris/arch-v32/kernel/vcs_hook.c b/arch/cris/arch-v32/kernel/vcs_hook.c new file mode 100644 index 000000000000..64d71c54c22c --- /dev/null +++ b/arch/cris/arch-v32/kernel/vcs_hook.c @@ -0,0 +1,96 @@ +// $Id: vcs_hook.c,v 1.2 2003/08/12 12:01:06 starvik Exp $ +// +// Call simulator hook. This is the part running in the +// simulated program. +// + +#include "vcs_hook.h" +#include <stdarg.h> +#include <asm/arch-v32/hwregs/reg_map.h> +#include <asm/arch-v32/hwregs/intr_vect_defs.h> + +#define HOOK_TRIG_ADDR 0xb7000000 /* hook cvlog model reg address */ +#define HOOK_MEM_BASE_ADDR 0xa0000000 /* csp4 (shared mem) base addr */ + +#define HOOK_DATA(offset) ((unsigned*) HOOK_MEM_BASE_ADDR)[offset] +#define VHOOK_DATA(offset) ((volatile unsigned*) HOOK_MEM_BASE_ADDR)[offset] +#define HOOK_TRIG(funcid) do { *((unsigned *) HOOK_TRIG_ADDR) = funcid; } while(0) +#define HOOK_DATA_BYTE(offset) ((unsigned char*) HOOK_MEM_BASE_ADDR)[offset] + + +// ------------------------------------------------------------------ hook_call +int hook_call( unsigned id, unsigned pcnt, ...) { + va_list ap; + unsigned i; + unsigned ret; +#ifdef USING_SOS + PREEMPT_OFF_SAVE(); +#endif + + // pass parameters + HOOK_DATA(0) = id; + + /* Have to make hook_print_str a special case since we call with a + parameter of byte type. Should perhaps be a separate + hook_call. */ + + if (id == hook_print_str) { + int i; + char *str; + + HOOK_DATA(1) = pcnt; + + va_start(ap, pcnt); + str = (char*)va_arg(ap,unsigned); + + for (i=0; i!=pcnt; i++) { + HOOK_DATA_BYTE(8+i) = str[i]; + } + HOOK_DATA_BYTE(8+i) = 0; /* null byte */ + } + else { + va_start(ap, pcnt); + for( i = 1; i <= pcnt; i++ ) HOOK_DATA(i) = va_arg(ap,unsigned); + va_end(ap); + } + + // read from mem to make sure data has propagated to memory before trigging + *((volatile unsigned*) HOOK_MEM_BASE_ADDR); + + // trigger hook + HOOK_TRIG(id); + + // wait for call to finish + while( VHOOK_DATA(0) > 0 ) {} + + // extract return value + + ret = VHOOK_DATA(1); + +#ifdef USING_SOS + PREEMPT_RESTORE(); +#endif + return ret; +} + +unsigned +hook_buf(unsigned i) +{ + return (HOOK_DATA(i)); +} + +void print_str( const char *str ) { + int i; + for (i=1; str[i]; i++); /* find null at end of string */ + hook_call(hook_print_str, i, str); +} + +// --------------------------------------------------------------- CPU_KICK_DOG +void CPU_KICK_DOG(void) { + (void) hook_call( hook_kick_dog, 0 ); +} + +// ------------------------------------------------------- CPU_WATCHDOG_TIMEOUT +void CPU_WATCHDOG_TIMEOUT( unsigned t ) { + (void) hook_call( hook_dog_timeout, 1, t ); +} diff --git a/arch/cris/arch-v32/kernel/vcs_hook.h b/arch/cris/arch-v32/kernel/vcs_hook.h new file mode 100644 index 000000000000..7d73709e3cc6 --- /dev/null +++ b/arch/cris/arch-v32/kernel/vcs_hook.h @@ -0,0 +1,42 @@ +// $Id: vcs_hook.h,v 1.1 2003/08/12 12:01:06 starvik Exp $ +// +// Call simulator hook functions + +#ifndef HOOK_H +#define HOOK_H + +int hook_call( unsigned id, unsigned pcnt, ...); + +enum hook_ids { + hook_debug_on = 1, + hook_debug_off, + hook_stop_sim_ok, + hook_stop_sim_fail, + hook_alloc_shared, + hook_ptr_shared, + hook_free_shared, + hook_file2shared, + hook_cmp_shared, + hook_print_params, + hook_sim_time, + hook_stop_sim, + hook_kick_dog, + hook_dog_timeout, + hook_rand, + hook_srand, + hook_rand_range, + hook_print_str, + hook_print_hex, + hook_cmp_offset_shared, + hook_fill_random_shared, + hook_alloc_random_data, + hook_calloc_random_data, + hook_print_int, + hook_print_uint, + hook_fputc, + hook_init_fd, + hook_sbrk + +}; + +#endif diff --git a/arch/cris/arch-v32/lib/Makefile b/arch/cris/arch-v32/lib/Makefile new file mode 100644 index 000000000000..05b3ec6978d6 --- /dev/null +++ b/arch/cris/arch-v32/lib/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for Etrax-specific library files.. +# + +lib-y = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o spinlock.o + diff --git a/arch/cris/arch-v32/lib/checksum.S b/arch/cris/arch-v32/lib/checksum.S new file mode 100644 index 000000000000..32e66181b826 --- /dev/null +++ b/arch/cris/arch-v32/lib/checksum.S @@ -0,0 +1,111 @@ +/* + * A fast checksum routine using movem + * Copyright (c) 1998-2001, 2003 Axis Communications AB + * + * csum_partial(const unsigned char * buff, int len, unsigned int sum) + */ + + .globl csum_partial +csum_partial: + + ;; r10 - src + ;; r11 - length + ;; r12 - checksum + + ;; check for breakeven length between movem and normal word looping versions + ;; we also do _NOT_ want to compute a checksum over more than the + ;; actual length when length < 40 + + cmpu.w 80,$r11 + blo _word_loop + nop + + ;; need to save the registers we use below in the movem loop + ;; this overhead is why we have a check above for breakeven length + ;; only r0 - r8 have to be saved, the other ones are clobber-able + ;; according to the ABI + + subq 9*4,$sp + subq 10*4,$r11 ; update length for the first loop + movem $r8,[$sp] + + ;; do a movem checksum + +_mloop: movem [$r10+],$r9 ; read 10 longwords + + ;; perform dword checksumming on the 10 longwords + + add.d $r0,$r12 + addc $r1,$r12 + addc $r2,$r12 + addc $r3,$r12 + addc $r4,$r12 + addc $r5,$r12 + addc $r6,$r12 + addc $r7,$r12 + addc $r8,$r12 + addc $r9,$r12 + + ;; fold the carry into the checksum, to avoid having to loop the carry + ;; back into the top + + addc 0,$r12 + addc 0,$r12 ; do it again, since we might have generated a carry + + subq 10*4,$r11 + bge _mloop + nop + + addq 10*4,$r11 ; compensate for last loop underflowing length + + movem [$sp+],$r8 ; restore regs + +_word_loop: + ;; only fold if there is anything to fold. + + cmpq 0,$r12 + beq _no_fold + + ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below. + ;; r9 and r13 can be used as temporaries. + + moveq -1,$r9 ; put 0xffff in r9, faster than move.d 0xffff,r9 + lsrq 16,$r9 + + move.d $r12,$r13 + lsrq 16,$r13 ; r13 = checksum >> 16 + and.d $r9,$r12 ; checksum = checksum & 0xffff + add.d $r13,$r12 ; checksum += r13 + move.d $r12,$r13 ; do the same again, maybe we got a carry last add + lsrq 16,$r13 + and.d $r9,$r12 + add.d $r13,$r12 + +_no_fold: + cmpq 2,$r11 + blt _no_words + nop + + ;; checksum the rest of the words + + subq 2,$r11 + +_wloop: subq 2,$r11 + bge _wloop + addu.w [$r10+],$r12 + + addq 2,$r11 + +_no_words: + ;; see if we have one odd byte more + cmpq 1,$r11 + beq _do_byte + nop + ret + move.d $r12,$r10 + +_do_byte: + ;; copy and checksum the last byte + addu.b [$r10],$r12 + ret + move.d $r12,$r10 diff --git a/arch/cris/arch-v32/lib/checksumcopy.S b/arch/cris/arch-v32/lib/checksumcopy.S new file mode 100644 index 000000000000..9303ccbadc6d --- /dev/null +++ b/arch/cris/arch-v32/lib/checksumcopy.S @@ -0,0 +1,120 @@ +/* + * A fast checksum+copy routine using movem + * Copyright (c) 1998, 2001, 2003 Axis Communications AB + * + * Authors: Bjorn Wesen + * + * csum_partial_copy_nocheck(const char *src, char *dst, + * int len, unsigned int sum) + */ + + .globl csum_partial_copy_nocheck +csum_partial_copy_nocheck: + + ;; r10 - src + ;; r11 - dst + ;; r12 - length + ;; r13 - checksum + + ;; check for breakeven length between movem and normal word looping versions + ;; we also do _NOT_ want to compute a checksum over more than the + ;; actual length when length < 40 + + cmpu.w 80,$r12 + blo _word_loop + nop + + ;; need to save the registers we use below in the movem loop + ;; this overhead is why we have a check above for breakeven length + ;; only r0 - r8 have to be saved, the other ones are clobber-able + ;; according to the ABI + + subq 9*4,$sp + subq 10*4,$r12 ; update length for the first loop + movem $r8,[$sp] + + ;; do a movem copy and checksum + +1: ;; A failing userspace access (the read) will have this as PC. +_mloop: movem [$r10+],$r9 ; read 10 longwords + movem $r9,[$r11+] ; write 10 longwords + + ;; perform dword checksumming on the 10 longwords + + add.d $r0,$r13 + addc $r1,$r13 + addc $r2,$r13 + addc $r3,$r13 + addc $r4,$r13 + addc $r5,$r13 + addc $r6,$r13 + addc $r7,$r13 + addc $r8,$r13 + addc $r9,$r13 + + ;; fold the carry into the checksum, to avoid having to loop the carry + ;; back into the top + + addc 0,$r13 + addc 0,$r13 ; do it again, since we might have generated a carry + + subq 10*4,$r12 + bge _mloop + nop + + addq 10*4,$r12 ; compensate for last loop underflowing length + + movem [$sp+],$r8 ; restore regs + +_word_loop: + ;; only fold if there is anything to fold. + + cmpq 0,$r13 + beq _no_fold + + ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below + ;; r9 can be used as temporary. + + move.d $r13,$r9 + lsrq 16,$r9 ; r0 = checksum >> 16 + and.d 0xffff,$r13 ; checksum = checksum & 0xffff + add.d $r9,$r13 ; checksum += r0 + move.d $r13,$r9 ; do the same again, maybe we got a carry last add + lsrq 16,$r9 + and.d 0xffff,$r13 + add.d $r9,$r13 + +_no_fold: + cmpq 2,$r12 + blt _no_words + nop + + ;; copy and checksum the rest of the words + + subq 2,$r12 + +2: ;; A failing userspace access for the read below will have this as PC. +_wloop: move.w [$r10+],$r9 + addu.w $r9,$r13 + subq 2,$r12 + bge _wloop + move.w $r9,[$r11+] + + addq 2,$r12 + +_no_words: + ;; see if we have one odd byte more + cmpq 1,$r12 + beq _do_byte + nop + ret + move.d $r13,$r10 + +_do_byte: + ;; copy and checksum the last byte +3: ;; A failing userspace access for the read below will have this as PC. + move.b [$r10],$r9 + addu.b $r9,$r13 + move.b $r9,[$r11] + ret + move.d $r13,$r10 diff --git a/arch/cris/arch-v32/lib/csumcpfruser.S b/arch/cris/arch-v32/lib/csumcpfruser.S new file mode 100644 index 000000000000..600ec16b9f28 --- /dev/null +++ b/arch/cris/arch-v32/lib/csumcpfruser.S @@ -0,0 +1,69 @@ +/* + * Add-on to transform csum_partial_copy_nocheck in checksumcopy.S into + * csum_partial_copy_from_user by adding exception records. + * + * Copyright (C) 2001, 2003 Axis Communications AB. + * + * Author: Hans-Peter Nilsson. + */ + +#include <asm/errno.h> + +/* Same function body, but a different name. If we just added exception + records to _csum_partial_copy_nocheck and made it generic, we wouldn't + know a user fault from a kernel fault and we would have overhead in + each kernel caller for the error-pointer argument. + + unsigned int csum_partial_copy_from_user + (const char *src, char *dst, int len, unsigned int sum, int *errptr); + + Note that the errptr argument is only set if we encounter an error. + It is conveniently located on the stack, so the normal function body + does not have to handle it. */ + +#define csum_partial_copy_nocheck csum_partial_copy_from_user + +/* There are local labels numbered 1, 2 and 3 present to mark the + different from-user accesses. */ +#include "checksumcopy.S" + + .section .fixup,"ax" + +;; Here from the movem loop; restore stack. +4: + movem [$sp+],$r8 +;; r12 is already decremented. Add back chunk_size-2. + addq 40-2,$r12 + +;; Here from the word loop; r12 is off by 2; add it back. +5: + addq 2,$r12 + +;; Here from a failing single byte. +6: + +;; Signal in *errptr that we had a failing access. + move.d [$sp],$acr + moveq -EFAULT,$r9 + subq 4,$sp + move.d $r9,[$acr] + +;; Clear the rest of the destination area using memset. Preserve the +;; checksum for the readable bytes. + move.d $r13,[$sp] + subq 4,$sp + move.d $r11,$r10 + move $srp,[$sp] + jsr memset + clear.d $r11 + + move [$sp+],$srp + ret + move.d [$sp+],$r10 + + .previous + .section __ex_table,"a" + .dword 1b,4b + .dword 2b,5b + .dword 3b,6b + .previous diff --git a/arch/cris/arch-v32/lib/dram_init.S b/arch/cris/arch-v32/lib/dram_init.S new file mode 100644 index 000000000000..47b6cf5f4afd --- /dev/null +++ b/arch/cris/arch-v32/lib/dram_init.S @@ -0,0 +1,120 @@ +/* $Id: dram_init.S,v 1.4 2005/04/24 18:48:32 starvik Exp $ + * + * DRAM/SDRAM initialization - alter with care + * This file is intended to be included from other assembler files + * + * Note: This file may not modify r8 or r9 because they are used to + * carry information from the decompresser to the kernel + * + * Copyright (C) 2000-2003 Axis Communications AB + * + * Authors: Mikael Starvik (starvik@axis.com) + */ + +/* Just to be certain the config file is included, we include it here + * explicitely instead of depending on it being included in the file that + * uses this code. + */ + +#include <linux/config.h> +#include <asm/arch/hwregs/asm/reg_map_asm.h> +#include <asm/arch/hwregs/asm/bif_core_defs_asm.h> + + ;; WARNING! The registers r8 and r9 are used as parameters carrying + ;; information from the decompressor (if the kernel was compressed). + ;; They should not be used in the code below. + + ; Refer to BIF MDS for a description of SDRAM initialization + + ; Bank configuration + move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp0), $r0 + move.d CONFIG_ETRAX_SDRAM_GRP0_CONFIG, $r1 + move.d $r1, [$r0] + move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp1), $r0 + move.d CONFIG_ETRAX_SDRAM_GRP1_CONFIG, $r1 + move.d $r1, [$r0] + + ; Calculate value of mrs_data + ; CAS latency = 2 && bus_width = 32 => 0x40 + ; CAS latency = 3 && bus_width = 32 => 0x60 + ; CAS latency = 2 && bus_width = 16 => 0x20 + ; CAS latency = 3 && bus_width = 16 => 0x30 + + ; Check if value is already supplied in kernel config + move.d CONFIG_ETRAX_SDRAM_COMMAND, $r2 + bne _set_timing + nop + + move.d 0x40, $r4 ; Assume 32 bits and CAS latency = 2 + move.d CONFIG_ETRAX_SDRAM_TIMING, $r1 + and.d 0x07, $r1 ; Get CAS latency + cmpq 2, $r1 ; CL = 2 ? + beq _bw_check + nop + move.d 0x60, $r4 + +_bw_check: + ; Assume that group 0 width is equal to group 1. This assumption + ; is wrong for a group 1 only hardware (such as the grand old + ; StorPoint+). + move.d CONFIG_ETRAX_SDRAM_GRP0_CONFIG, $r1 + and.d 0x200, $r1 ; DRAM width is bit 9 + beq _set_timing + lslq 2, $r4 ; mrs_data starts at bit 2 + lsrq 1, $r4 ; 16 bits. Shift down value. + + ; Set timing parameters (refresh off to avoid Guinness TR 83) +_set_timing: + move.d CONFIG_ETRAX_SDRAM_TIMING, $r1 + and.d ~(3 << reg_bif_core_rw_sdram_timing___ref___lsb), $r1 + move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing), $r0 + move.d $r1, [$r0] + + ; Issue NOP command + move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_cmd), $r5 + moveq regk_bif_core_nop, $r1 + move.d $r1, [$r5] + + ; Wait 200us + move.d 10000, $r2 +1: bne 1b + subq 1, $r2 + + ; Issue initialization command sequence + move.d _sdram_commands_start, $r2 + and.d 0x000fffff, $r2 ; Make sure commands are read from flash + move.d _sdram_commands_end, $r3 + and.d 0x000fffff, $r3 +1: clear.d $r6 + move.b [$r2+], $r6 ; Load command + or.d $r4, $r6 ; Add calculated mrs + move.d $r6, [$r5] ; Write rw_sdram_cmd + ; Wait 80 ns between each command + move.d 4000, $r7 +2: bne 2b + subq 1, $r7 + cmp.d $r2, $r3 ; Last command? + bne 1b + nop + + ; Start refresh + move.d CONFIG_ETRAX_SDRAM_TIMING, $r1 + move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing), $r0 + move.d $r1, [$r0] + + ; Initialization finished + ba _sdram_commands_end + nop + +_sdram_commands_start: + .byte regk_bif_core_pre ; Precharge + .byte regk_bif_core_ref ; refresh + .byte regk_bif_core_ref ; refresh + .byte regk_bif_core_ref ; refresh + .byte regk_bif_core_ref ; refresh + .byte regk_bif_core_ref ; refresh + .byte regk_bif_core_ref ; refresh + .byte regk_bif_core_ref ; refresh + .byte regk_bif_core_ref ; refresh + .byte regk_bif_core_mrs ; mrs +_sdram_commands_end: diff --git a/arch/cris/arch-v32/lib/hw_settings.S b/arch/cris/arch-v32/lib/hw_settings.S new file mode 100644 index 000000000000..5182e8c2cff2 --- /dev/null +++ b/arch/cris/arch-v32/lib/hw_settings.S @@ -0,0 +1,73 @@ +/* + * $Id: hw_settings.S,v 1.3 2005/04/24 18:36:57 starvik Exp $ + * + * This table is used by some tools to extract hardware parameters. + * The table should be included in the kernel and the decompressor. + * Don't forget to update the tools if you change this table. + * + * Copyright (C) 2001 Axis Communications AB + * + * Authors: Mikael Starvik (starvik@axis.com) + */ + +#include <linux/config.h> +#include <asm/arch/hwregs/asm/reg_map_asm.h> +#include <asm/arch/hwregs/asm/bif_core_defs_asm.h> +#include <asm/arch/hwregs/asm/gio_defs_asm.h> + + .ascii "HW_PARAM_MAGIC" ; Magic number + .dword 0xc0004000 ; Kernel start address + + ; Debug port +#ifdef CONFIG_ETRAX_DEBUG_PORT0 + .dword 0 +#elif defined(CONFIG_ETRAX_DEBUG_PORT1) + .dword 1 +#elif defined(CONFIG_ETRAX_DEBUG_PORT2) + .dword 2 +#elif defined(CONFIG_ETRAX_DEBUG_PORT3) + .dword 3 +#else + .dword 4 ; No debug +#endif + + ; Register values + .dword REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg) + .dword CONFIG_ETRAX_MEM_GRP1_CONFIG + .dword REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg) + .dword CONFIG_ETRAX_MEM_GRP2_CONFIG + .dword REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg) + .dword CONFIG_ETRAX_MEM_GRP3_CONFIG + .dword REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg) + .dword CONFIG_ETRAX_MEM_GRP4_CONFIG + .dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp0) + .dword CONFIG_ETRAX_SDRAM_GRP0_CONFIG + .dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp1) + .dword CONFIG_ETRAX_SDRAM_GRP1_CONFIG + .dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing) + .dword CONFIG_ETRAX_SDRAM_TIMING + .dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cmd) + .dword CONFIG_ETRAX_SDRAM_COMMAND + + .dword REG_ADDR(gio, regi_gio, rw_pa_dout) + .dword CONFIG_ETRAX_DEF_GIO_PA_OUT + .dword REG_ADDR(gio, regi_gio, rw_pa_oe) + .dword CONFIG_ETRAX_DEF_GIO_PA_OE + .dword REG_ADDR(gio, regi_gio, rw_pb_dout) + .dword CONFIG_ETRAX_DEF_GIO_PB_OUT + .dword REG_ADDR(gio, regi_gio, rw_pb_oe) + .dword CONFIG_ETRAX_DEF_GIO_PB_OE + .dword REG_ADDR(gio, regi_gio, rw_pc_dout) + .dword CONFIG_ETRAX_DEF_GIO_PC_OUT + .dword REG_ADDR(gio, regi_gio, rw_pc_oe) + .dword CONFIG_ETRAX_DEF_GIO_PC_OE + .dword REG_ADDR(gio, regi_gio, rw_pd_dout) + .dword CONFIG_ETRAX_DEF_GIO_PD_OUT + .dword REG_ADDR(gio, regi_gio, rw_pd_oe) + .dword CONFIG_ETRAX_DEF_GIO_PD_OE + .dword REG_ADDR(gio, regi_gio, rw_pe_dout) + .dword CONFIG_ETRAX_DEF_GIO_PE_OUT + .dword REG_ADDR(gio, regi_gio, rw_pe_oe) + .dword CONFIG_ETRAX_DEF_GIO_PE_OE + + .dword 0 ; No more register values diff --git a/arch/cris/arch-v32/lib/memset.c b/arch/cris/arch-v32/lib/memset.c new file mode 100644 index 000000000000..ffca1214674e --- /dev/null +++ b/arch/cris/arch-v32/lib/memset.c @@ -0,0 +1,253 @@ +/*#************************************************************************#*/ +/*#-------------------------------------------------------------------------*/ +/*# */ +/*# FUNCTION NAME: memset() */ +/*# */ +/*# PARAMETERS: void* dst; Destination address. */ +/*# int c; Value of byte to write. */ +/*# int len; Number of bytes to write. */ +/*# */ +/*# RETURNS: dst. */ +/*# */ +/*# DESCRIPTION: Sets the memory dst of length len bytes to c, as standard. */ +/*# Framework taken from memcpy. This routine is */ +/*# very sensitive to compiler changes in register allocation. */ +/*# Should really be rewritten to avoid this problem. */ +/*# */ +/*#-------------------------------------------------------------------------*/ +/*# */ +/*# HISTORY */ +/*# */ +/*# DATE NAME CHANGES */ +/*# ---- ---- ------- */ +/*# 990713 HP Tired of watching this function (or */ +/*# really, the nonoptimized generic */ +/*# implementation) take up 90% of simulator */ +/*# output. Measurements needed. */ +/*# */ +/*#-------------------------------------------------------------------------*/ + +#include <linux/types.h> + +/* No, there's no macro saying 12*4, since it is "hard" to get it into + the asm in a good way. Thus better to expose the problem everywhere. + */ + +/* Assuming 1 cycle per dword written or read (ok, not really true), and + one per instruction, then 43+3*(n/48-1) <= 24+24*(n/48-1) + so n >= 45.7; n >= 0.9; we win on the first full 48-byte block to set. */ + +#define ZERO_BLOCK_SIZE (1*12*4) + +void *memset(void *pdst, + int c, + size_t plen) +{ + /* Ok. Now we want the parameters put in special registers. + Make sure the compiler is able to make something useful of this. */ + + register char *return_dst __asm__ ("r10") = pdst; + register int n __asm__ ("r12") = plen; + register int lc __asm__ ("r11") = c; + + /* Most apps use memset sanely. Only those memsetting about 3..4 + bytes or less get penalized compared to the generic implementation + - and that's not really sane use. */ + + /* Ugh. This is fragile at best. Check with newer GCC releases, if + they compile cascaded "x |= x << 8" sanely! */ + __asm__("movu.b %0,$r13 \n\ + lslq 8,$r13 \n\ + move.b %0,$r13 \n\ + move.d $r13,%0 \n\ + lslq 16,$r13 \n\ + or.d $r13,%0" + : "=r" (lc) : "0" (lc) : "r13"); + + { + register char *dst __asm__ ("r13") = pdst; + + /* This is NONPORTABLE, but since this whole routine is */ + /* grossly nonportable that doesn't matter. */ + + if (((unsigned long) pdst & 3) != 0 + /* Oops! n=0 must be a legal call, regardless of alignment. */ + && n >= 3) + { + if ((unsigned long)dst & 1) + { + *dst = (char) lc; + n--; + dst++; + } + + if ((unsigned long)dst & 2) + { + *(short *)dst = lc; + n -= 2; + dst += 2; + } + } + + /* Now the fun part. For the threshold value of this, check the equation + above. */ + /* Decide which copying method to use. */ + if (n >= ZERO_BLOCK_SIZE) + { + /* For large copies we use 'movem' */ + + /* It is not optimal to tell the compiler about clobbering any + registers; that will move the saving/restoring of those registers + to the function prologue/epilogue, and make non-movem sizes + suboptimal. + + This method is not foolproof; it assumes that the "asm reg" + declarations at the beginning of the function really are used + here (beware: they may be moved to temporary registers). + This way, we do not have to save/move the registers around into + temporaries; we can safely use them straight away. + + If you want to check that the allocation was right; then + check the equalities in the first comment. It should say + "r13=r13, r12=r12, r11=r11" */ + __asm__ volatile (" \n\ + ;; Check that the register asm declaration got right. \n\ + ;; The GCC manual says it will work, but there *has* been bugs. \n\ + .ifnc %0-%1-%4,$r13-$r12-$r11 \n\ + .err \n\ + .endif \n\ + \n\ + ;; Save the registers we'll clobber in the movem process \n\ + ;; on the stack. Don't mention them to gcc, it will only be \n\ + ;; upset. \n\ + subq 11*4,$sp \n\ + movem $r10,[$sp] \n\ + \n\ + move.d $r11,$r0 \n\ + move.d $r11,$r1 \n\ + move.d $r11,$r2 \n\ + move.d $r11,$r3 \n\ + move.d $r11,$r4 \n\ + move.d $r11,$r5 \n\ + move.d $r11,$r6 \n\ + move.d $r11,$r7 \n\ + move.d $r11,$r8 \n\ + move.d $r11,$r9 \n\ + move.d $r11,$r10 \n\ + \n\ + ;; Now we've got this: \n\ + ;; r13 - dst \n\ + ;; r12 - n \n\ + \n\ + ;; Update n for the first loop \n\ + subq 12*4,$r12 \n\ +0: \n\ + subq 12*4,$r12 \n\ + bge 0b \n\ + movem $r11,[$r13+] \n\ + \n\ + addq 12*4,$r12 ;; compensate for last loop underflowing n \n\ + \n\ + ;; Restore registers from stack \n\ + movem [$sp+],$r10" + + /* Outputs */ : "=r" (dst), "=r" (n) + /* Inputs */ : "0" (dst), "1" (n), "r" (lc)); + } + + /* Either we directly starts copying, using dword copying + in a loop, or we copy as much as possible with 'movem' + and then the last block (<44 bytes) is copied here. + This will work since 'movem' will have updated src,dst,n. */ + + while ( n >= 16 ) + { + *((long*)dst)++ = lc; + *((long*)dst)++ = lc; + *((long*)dst)++ = lc; + *((long*)dst)++ = lc; + n -= 16; + } + + /* A switch() is definitely the fastest although it takes a LOT of code. + * Particularly if you inline code this. + */ + switch (n) + { + case 0: + break; + case 1: + *(char*)dst = (char) lc; + break; + case 2: + *(short*)dst = (short) lc; + break; + case 3: + *((short*)dst)++ = (short) lc; + *(char*)dst = (char) lc; + break; + case 4: + *((long*)dst)++ = lc; + break; + case 5: + *((long*)dst)++ = lc; + *(char*)dst = (char) lc; + break; + case 6: + *((long*)dst)++ = lc; + *(short*)dst = (short) lc; + break; + case 7: + *((long*)dst)++ = lc; + *((short*)dst)++ = (short) lc; + *(char*)dst = (char) lc; + break; + case 8: + *((long*)dst)++ = lc; + *((long*)dst)++ = lc; + break; + case 9: + *((long*)dst)++ = lc; + *((long*)dst)++ = lc; + *(char*)dst = (char) lc; + break; + case 10: + *((long*)dst)++ = lc; + *((long*)dst)++ = lc; + *(short*)dst = (short) lc; + break; + case 11: + *((long*)dst)++ = lc; + *((long*)dst)++ = lc; + *((short*)dst)++ = (short) lc; + *(char*)dst = (char) lc; + break; + case 12: + *((long*)dst)++ = lc; + *((long*)dst)++ = lc; + *((long*)dst)++ = lc; + break; + case 13: + *((long*)dst)++ = lc; + *((long*)dst)++ = lc; + *((long*)dst)++ = lc; + *(char*)dst = (char) lc; + break; + case 14: + *((long*)dst)++ = lc; + *((long*)dst)++ = lc; + *((long*)dst)++ = lc; + *(short*)dst = (short) lc; + break; + case 15: + *((long*)dst)++ = lc; + *((long*)dst)++ = lc; + *((long*)dst)++ = lc; + *((short*)dst)++ = (short) lc; + *(char*)dst = (char) lc; + break; + } + } + + return return_dst; /* destination pointer. */ +} /* memset() */ diff --git a/arch/cris/arch-v32/lib/nand_init.S b/arch/cris/arch-v32/lib/nand_init.S new file mode 100644 index 000000000000..aba5c751c282 --- /dev/null +++ b/arch/cris/arch-v32/lib/nand_init.S @@ -0,0 +1,179 @@ +##============================================================================= +## +## nand_init.S +## +## The bootrom copies data from the NAND flash to the internal RAM but +## due to a bug/feature we can only trust the 256 first bytes. So this +## code copies more data from NAND flash to internal RAM. Obvioulsy this +## code must fit in the first 256 bytes so alter with care. +## +## Some notes about the bug/feature for future reference: +## The bootrom copies the first 127 KB from NAND flash to internal +## memory. The problem is that it does a bytewise copy. NAND flashes +## does autoincrement on the address so for a 16-bite device each +## read/write increases the address by two. So the copy loop in the +## bootrom will discard every second byte. This is solved by inserting +## zeroes in every second byte in the first erase block. +## +## The bootrom also incorrectly assumes that it can read the flash +## linear with only one read command but the flash will actually +## switch between normal area and spare area if you do that so we +## can't trust more than the first 256 bytes. +## +##============================================================================= + +#include <asm/arch/hwregs/asm/reg_map_asm.h> +#include <asm/arch/hwregs/asm/gio_defs_asm.h> +#include <asm/arch/hwregs/asm/pinmux_defs_asm.h> +#include <asm/arch/hwregs/asm/bif_core_defs_asm.h> +#include <asm/arch/hwregs/asm/config_defs_asm.h> +#include <linux/config.h> + +;; There are 8-bit NAND flashes and 16-bit NAND flashes. +;; We need to treat them slightly different. +#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 +#define PAGE_SIZE 256 +#else +#error 2 +#define PAGE_SIZE 512 +#endif +#define ERASE_BLOCK 16384 + +;; GPIO pins connected to NAND flash +#define CE 4 +#define CLE 5 +#define ALE 6 +#define BY 7 + +;; Address space for NAND flash +#define NAND_RD_ADDR 0x90000000 +#define NAND_WR_ADDR 0x94000000 + +#define READ_CMD 0x00 + +;; Readability macros +#define CSP_MASK \ + REG_MASK(bif_core, rw_grp3_cfg, gated_csp0) | \ + REG_MASK(bif_core, rw_grp3_cfg, gated_csp1) +#define CSP_VAL \ + REG_STATE(bif_core, rw_grp3_cfg, gated_csp0, rd) | \ + REG_STATE(bif_core, rw_grp3_cfg, gated_csp1, wr) + +;;---------------------------------------------------------------------------- +;; Macros to set/clear GPIO bits + +.macro SET x + or.b (1<<\x),$r9 + move.d $r9, [$r2] +.endm + +.macro CLR x + and.b ~(1<<\x),$r9 + move.d $r9, [$r2] +.endm + +;;---------------------------------------------------------------------------- + +nand_boot: + ;; Check if nand boot was selected + move.d REG_ADDR(config, regi_config, r_bootsel), $r0 + move.d [$r0], $r0 + and.d REG_MASK(config, r_bootsel, boot_mode), $r0 + cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 + bne normal_boot ; No NAND boot + nop + +copy_nand_to_ram: + ;; copy_nand_to_ram + ;; Arguments + ;; r10 - destination + ;; r11 - source offset + ;; r12 - size + ;; r13 - Address to jump to after completion + ;; Note : r10-r12 are clobbered on return + ;; Registers used: + ;; r0 - NAND_RD_ADDR + ;; r1 - NAND_WR_ADDR + ;; r2 - reg_gio_rw_pa_dout + ;; r3 - reg_gio_r_pa_din + ;; r4 - tmp + ;; r5 - byte counter within a page + ;; r6 - reg_pinmux_rw_pa + ;; r7 - reg_gio_rw_pa_oe + ;; r8 - reg_bif_core_rw_grp3_cfg + ;; r9 - reg_gio_rw_pa_dout shadow + move.d 0x90000000, $r0 + move.d 0x94000000, $r1 + move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r2 + move.d REG_ADDR(gio, regi_gio, r_pa_din), $r3 + move.d REG_ADDR(pinmux, regi_pinmux, rw_pa), $r6 + move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r7 + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r8 + +#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 + lsrq 1, $r11 +#endif + ;; Set up GPIO + move.d [$r2], $r9 + move.d [$r7], $r4 + or.b (1<<ALE) | (1 << CLE) | (1<<CE), $r4 + move.d $r4, [$r7] + + ;; Set up bif + move.d [$r8], $r4 + and.d CSP_MASK, $r4 + or.d CSP_VAL, $r4 + move.d $r4, [$r8] + +1: ;; Copy one page + CLR CE + SET CLE + moveq READ_CMD, $r4 + move.b $r4, [$r1] + moveq 20, $r4 +2: bne 2b + subq 1, $r4 + CLR CLE + SET ALE + clear.w [$r1] ; Column address = 0 + move.d $r11, $r4 + lsrq 8, $r4 + move.b $r4, [$r1] ; Row address + lsrq 8, $r4 + move.b $r4, [$r1] ; Row adddress + moveq 20, $r4 +2: bne 2b + subq 1, $r4 + CLR ALE +2: move.d [$r3], $r4 + and.d 1 << BY, $r4 + beq 2b + movu.w PAGE_SIZE, $r5 +2: ; Copy one byte/word +#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 + move.w [$r0], $r4 +#else + move.b [$r0], $r4 +#endif + subq 1, $r5 + bne 2b +#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 + move.w $r4, [$r10+] + subu.w PAGE_SIZE*2, $r12 +#else + move.b $r4, [$r10+] + subu.w PAGE_SIZE, $r12 +#endif + bpl 1b + addu.w PAGE_SIZE, $r11 + + ;; End of copy + jump $r13 + nop + + ;; This will warn if the code above is too large. If you consider + ;; to remove this you don't understand the bug/feature. + .org 256 + .org ERASE_BLOCK + +normal_boot: diff --git a/arch/cris/arch-v32/lib/spinlock.S b/arch/cris/arch-v32/lib/spinlock.S new file mode 100644 index 000000000000..2437ae7f6ed2 --- /dev/null +++ b/arch/cris/arch-v32/lib/spinlock.S @@ -0,0 +1,33 @@ +;; Core of the spinlock implementation +;; +;; Copyright (C) 2004 Axis Communications AB. +;; +;; Author: Mikael Starvik + + + .global cris_spin_lock + .global cris_spin_trylock + + .text + +cris_spin_lock: + clearf p +1: test.d [$r10] + beq 1b + clearf p + ax + clear.d [$r10] + bcs 1b + clearf p + ret + nop + +cris_spin_trylock: + clearf p +1: move.d [$r10], $r11 + ax + clear.d [$r10] + bcs 1b + clearf p + ret + move.d $r11,$r10 diff --git a/arch/cris/arch-v32/lib/string.c b/arch/cris/arch-v32/lib/string.c new file mode 100644 index 000000000000..98e282ac824a --- /dev/null +++ b/arch/cris/arch-v32/lib/string.c @@ -0,0 +1,219 @@ +/*#************************************************************************#*/ +/*#-------------------------------------------------------------------------*/ +/*# */ +/*# FUNCTION NAME: memcpy() */ +/*# */ +/*# PARAMETERS: void* dst; Destination address. */ +/*# void* src; Source address. */ +/*# int len; Number of bytes to copy. */ +/*# */ +/*# RETURNS: dst. */ +/*# */ +/*# DESCRIPTION: Copies len bytes of memory from src to dst. No guarantees */ +/*# about copying of overlapping memory areas. This routine is */ +/*# very sensitive to compiler changes in register allocation. */ +/*# Should really be rewritten to avoid this problem. */ +/*# */ +/*#-------------------------------------------------------------------------*/ +/*# */ +/*# HISTORY */ +/*# */ +/*# DATE NAME CHANGES */ +/*# ---- ---- ------- */ +/*# 941007 Kenny R Creation */ +/*# 941011 Kenny R Lots of optimizations and inlining. */ +/*# 941129 Ulf A Adapted for use in libc. */ +/*# 950216 HP N==0 forgotten if non-aligned src/dst. */ +/*# Added some optimizations. */ +/*# 001025 HP Make src and dst char *. Align dst to */ +/*# dword, not just word-if-both-src-and-dst- */ +/*# are-misaligned. */ +/*# */ +/*#-------------------------------------------------------------------------*/ + +#include <linux/types.h> + +void *memcpy(void *pdst, + const void *psrc, + size_t pn) +{ + /* Ok. Now we want the parameters put in special registers. + Make sure the compiler is able to make something useful of this. + As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). + + If gcc was allright, it really would need no temporaries, and no + stack space to save stuff on. */ + + register void *return_dst __asm__ ("r10") = pdst; + register char *dst __asm__ ("r13") = pdst; + register const char *src __asm__ ("r11") = psrc; + register int n __asm__ ("r12") = pn; + + + /* When src is aligned but not dst, this makes a few extra needless + cycles. I believe it would take as many to check that the + re-alignment was unnecessary. */ + if (((unsigned long) dst & 3) != 0 + /* Don't align if we wouldn't copy more than a few bytes; so we + don't have to check further for overflows. */ + && n >= 3) + { + if ((unsigned long) dst & 1) + { + n--; + *(char*)dst = *(char*)src; + src++; + dst++; + } + + if ((unsigned long) dst & 2) + { + n -= 2; + *(short*)dst = *(short*)src; + src += 2; + dst += 2; + } + } + + /* Decide which copying method to use. Movem is dirt cheap, so the + overheap is low enough to always use the minimum block size as the + threshold. */ + if (n >= 44) + { + /* For large copies we use 'movem' */ + + /* It is not optimal to tell the compiler about clobbering any + registers; that will move the saving/restoring of those registers + to the function prologue/epilogue, and make non-movem sizes + suboptimal. */ + __asm__ volatile (" \n\ + ;; Check that the register asm declaration got right. \n\ + ;; The GCC manual explicitly says TRT will happen. \n\ + .ifnc %0-%1-%2,$r13-$r11-$r12 \n\ + .err \n\ + .endif \n\ + \n\ + ;; Save the registers we'll use in the movem process \n\ + \n\ + ;; on the stack. \n\ + subq 11*4,$sp \n\ + movem $r10,[$sp] \n\ + \n\ + ;; Now we've got this: \n\ + ;; r11 - src \n\ + ;; r13 - dst \n\ + ;; r12 - n \n\ + \n\ + ;; Update n for the first loop \n\ + subq 44,$r12 \n\ +0: \n\ + movem [$r11+],$r10 \n\ + subq 44,$r12 \n\ + bge 0b \n\ + movem $r10,[$r13+] \n\ + \n\ + addq 44,$r12 ;; compensate for last loop underflowing n \n\ + \n\ + ;; Restore registers from stack \n\ + movem [$sp+],$r10" + + /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n) + /* Inputs */ : "0" (dst), "1" (src), "2" (n)); + + } + + /* Either we directly starts copying, using dword copying + in a loop, or we copy as much as possible with 'movem' + and then the last block (<44 bytes) is copied here. + This will work since 'movem' will have updated src,dst,n. */ + + while ( n >= 16 ) + { + *((long*)dst)++ = *((long*)src)++; + *((long*)dst)++ = *((long*)src)++; + *((long*)dst)++ = *((long*)src)++; + *((long*)dst)++ = *((long*)src)++; + n -= 16; + } + + /* A switch() is definitely the fastest although it takes a LOT of code. + * Particularly if you inline code this. + */ + switch (n) + { + case 0: + break; + case 1: + *(char*)dst = *(char*)src; + break; + case 2: + *(short*)dst = *(short*)src; + break; + case 3: + *((short*)dst)++ = *((short*)src)++; + *(char*)dst = *(char*)src; + break; + case 4: + *((long*)dst)++ = *((long*)src)++; + break; + case 5: + *((long*)dst)++ = *((long*)src)++; + *(char*)dst = *(char*)src; + break; + case 6: + *((long*)dst)++ = *((long*)src)++; + *(short*)dst = *(short*)src; + break; + case 7: + *((long*)dst)++ = *((long*)src)++; + *((short*)dst)++ = *((short*)src)++; + *(char*)dst = *(char*)src; + break; + case 8: + *((long*)dst)++ = *((long*)src)++; + *((long*)dst)++ = *((long*)src)++; + break; + case 9: + *((long*)dst)++ = *((long*)src)++; + *((long*)dst)++ = *((long*)src)++; + *(char*)dst = *(char*)src; + break; + case 10: + *((long*)dst)++ = *((long*)src)++; + *((long*)dst)++ = *((long*)src)++; + *(short*)dst = *(short*)src; + break; + case 11: + *((long*)dst)++ = *((long*)src)++; + *((long*)dst)++ = *((long*)src)++; + *((short*)dst)++ = *((short*)src)++; + *(char*)dst = *(char*)src; + break; + case 12: + *((long*)dst)++ = *((long*)src)++; + *((long*)dst)++ = *((long*)src)++; + *((long*)dst)++ = *((long*)src)++; + break; + case 13: + *((long*)dst)++ = *((long*)src)++; + *((long*)dst)++ = *((long*)src)++; + *((long*)dst)++ = *((long*)src)++; + *(char*)dst = *(char*)src; + break; + case 14: + *((long*)dst)++ = *((long*)src)++; + *((long*)dst)++ = *((long*)src)++; + *((long*)dst)++ = *((long*)src)++; + *(short*)dst = *(short*)src; + break; + case 15: + *((long*)dst)++ = *((long*)src)++; + *((long*)dst)++ = *((long*)src)++; + *((long*)dst)++ = *((long*)src)++; + *((short*)dst)++ = *((short*)src)++; + *(char*)dst = *(char*)src; + break; + } + + return return_dst; /* destination pointer. */ +} /* memcpy() */ diff --git a/arch/cris/arch-v32/lib/usercopy.c b/arch/cris/arch-v32/lib/usercopy.c new file mode 100644 index 000000000000..f0b08460c1be --- /dev/null +++ b/arch/cris/arch-v32/lib/usercopy.c @@ -0,0 +1,470 @@ +/* + * User address space access functions. + * The non-inlined parts of asm-cris/uaccess.h are here. + * + * Copyright (C) 2000, 2003 Axis Communications AB. + * + * Written by Hans-Peter Nilsson. + * Pieces used from memcpy, originally by Kenny Ranerup long time ago. + */ + +#include <asm/uaccess.h> + +/* Asm:s have been tweaked (within the domain of correctness) to give + satisfactory results for "gcc version 3.2.1 Axis release R53/1.53-v32". + + Check regularly... + + Note that for CRISv32, the PC saved at a bus-fault is the address + *at* the faulting instruction, with a special case for instructions + in delay slots: then it's the address of the branch. Note also that + in contrast to v10, a postincrement in the instruction is *not* + performed at a bus-fault; the register is seen having the original + value in fault handlers. */ + + +/* Copy to userspace. This is based on the memcpy used for + kernel-to-kernel copying; see "string.c". */ + +unsigned long +__copy_user (void __user *pdst, const void *psrc, unsigned long pn) +{ + /* We want the parameters put in special registers. + Make sure the compiler is able to make something useful of this. + As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). + + FIXME: Comment for old gcc version. Check. + If gcc was allright, it really would need no temporaries, and no + stack space to save stuff on. */ + + register char *dst __asm__ ("r13") = pdst; + register const char *src __asm__ ("r11") = psrc; + register int n __asm__ ("r12") = pn; + register int retn __asm__ ("r10") = 0; + + + /* When src is aligned but not dst, this makes a few extra needless + cycles. I believe it would take as many to check that the + re-alignment was unnecessary. */ + if (((unsigned long) dst & 3) != 0 + /* Don't align if we wouldn't copy more than a few bytes; so we + don't have to check further for overflows. */ + && n >= 3) + { + if ((unsigned long) dst & 1) + { + __asm_copy_to_user_1 (dst, src, retn); + n--; + } + + if ((unsigned long) dst & 2) + { + __asm_copy_to_user_2 (dst, src, retn); + n -= 2; + } + } + + /* Movem is dirt cheap. The overheap is low enough to always use the + minimum possible block size as the threshold. */ + if (n >= 44) + { + /* For large copies we use 'movem'. */ + + /* It is not optimal to tell the compiler about clobbering any + registers; that will move the saving/restoring of those registers + to the function prologue/epilogue, and make non-movem sizes + suboptimal. */ + __asm__ volatile ("\ + ;; Check that the register asm declaration got right. \n\ + ;; The GCC manual explicitly says TRT will happen. \n\ + .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\ + .err \n\ + .endif \n\ + \n\ + ;; Save the registers we'll use in the movem process \n\ + ;; on the stack. \n\ + subq 11*4,$sp \n\ + movem $r10,[$sp] \n\ + \n\ + ;; Now we've got this: \n\ + ;; r11 - src \n\ + ;; r13 - dst \n\ + ;; r12 - n \n\ + \n\ + ;; Update n for the first loop \n\ + subq 44,$r12 \n\ +0: \n\ + movem [$r11+],$r10 \n\ + subq 44,$r12 \n\ +1: bge 0b \n\ + movem $r10,[$r13+] \n\ +3: \n\ + addq 44,$r12 ;; compensate for last loop underflowing n \n\ + \n\ + ;; Restore registers from stack \n\ + movem [$sp+],$r10 \n\ +2: \n\ + .section .fixup,\"ax\" \n\ +4: \n\ +; When failing on any of the 1..44 bytes in a chunk, we adjust back the \n\ +; source pointer and just drop through to the by-16 and by-4 loops to \n\ +; get the correct number of failing bytes. This necessarily means a \n\ +; few extra exceptions, but invalid user pointers shouldn't happen in \n\ +; time-critical code anyway. \n\ + jump 3b \n\ + subq 44,$r11 \n\ + \n\ + .previous \n\ + .section __ex_table,\"a\" \n\ + .dword 1b,4b \n\ + .previous" + + /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn) + /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn)); + + } + + while (n >= 16) + { + __asm_copy_to_user_16 (dst, src, retn); + n -= 16; + } + + /* Having a separate by-four loops cuts down on cache footprint. + FIXME: Test with and without; increasing switch to be 0..15. */ + while (n >= 4) + { + __asm_copy_to_user_4 (dst, src, retn); + n -= 4; + } + + switch (n) + { + case 0: + break; + case 1: + __asm_copy_to_user_1 (dst, src, retn); + break; + case 2: + __asm_copy_to_user_2 (dst, src, retn); + break; + case 3: + __asm_copy_to_user_3 (dst, src, retn); + break; + } + + return retn; +} + +/* Copy from user to kernel, zeroing the bytes that were inaccessible in + userland. The return-value is the number of bytes that were + inaccessible. */ + +unsigned long +__copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn) +{ + /* We want the parameters put in special registers. + Make sure the compiler is able to make something useful of this. + As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). + + FIXME: Comment for old gcc version. Check. + If gcc was allright, it really would need no temporaries, and no + stack space to save stuff on. */ + + register char *dst __asm__ ("r13") = pdst; + register const char *src __asm__ ("r11") = psrc; + register int n __asm__ ("r12") = pn; + register int retn __asm__ ("r10") = 0; + + /* The best reason to align src is that we then know that a read-fault + was for aligned bytes; there's no 1..3 remaining good bytes to + pickle. */ + if (((unsigned long) src & 3) != 0) + { + if (((unsigned long) src & 1) && n != 0) + { + __asm_copy_from_user_1 (dst, src, retn); + n--; + } + + if (((unsigned long) src & 2) && n >= 2) + { + __asm_copy_from_user_2 (dst, src, retn); + n -= 2; + } + + /* We only need one check after the unalignment-adjustments, because + if both adjustments were done, either both or neither reference + had an exception. */ + if (retn != 0) + goto copy_exception_bytes; + } + + /* Movem is dirt cheap. The overheap is low enough to always use the + minimum possible block size as the threshold. */ + if (n >= 44) + { + /* It is not optimal to tell the compiler about clobbering any + registers; that will move the saving/restoring of those registers + to the function prologue/epilogue, and make non-movem sizes + suboptimal. */ + __asm__ volatile ("\ + .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\ + .err \n\ + .endif \n\ + \n\ + ;; Save the registers we'll use in the movem process \n\ + ;; on the stack. \n\ + subq 11*4,$sp \n\ + movem $r10,[$sp] \n\ + \n\ + ;; Now we've got this: \n\ + ;; r11 - src \n\ + ;; r13 - dst \n\ + ;; r12 - n \n\ + \n\ + ;; Update n for the first loop \n\ + subq 44,$r12 \n\ +0: \n\ + movem [$r11+],$r10 \n\ + \n\ + subq 44,$r12 \n\ + bge 0b \n\ + movem $r10,[$r13+] \n\ + \n\ +4: \n\ + addq 44,$r12 ;; compensate for last loop underflowing n \n\ + \n\ + ;; Restore registers from stack \n\ + movem [$sp+],$r10 \n\ + .section .fixup,\"ax\" \n\ + \n\ +;; Do not jump back into the loop if we fail. For some uses, we get a \n\ +;; page fault somewhere on the line. Without checking for page limits, \n\ +;; we don't know where, but we need to copy accurately and keep an \n\ +;; accurate count; not just clear the whole line. To do that, we fall \n\ +;; down in the code below, proceeding with smaller amounts. It should \n\ +;; be kept in mind that we have to cater to code like what at one time \n\ +;; was in fs/super.c: \n\ +;; i = size - copy_from_user((void *)page, data, size); \n\ +;; which would cause repeated faults while clearing the remainder of \n\ +;; the SIZE bytes at PAGE after the first fault. \n\ +;; A caveat here is that we must not fall through from a failing page \n\ +;; to a valid page. \n\ + \n\ +3: \n\ + jump 4b ;; Fall through, pretending the fault didn't happen. \n\ + nop \n\ + \n\ + .previous \n\ + .section __ex_table,\"a\" \n\ + .dword 0b,3b \n\ + .previous" + + /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn) + /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn)); + } + + /* Either we directly start copying here, using dword copying in a loop, + or we copy as much as possible with 'movem' and then the last block + (<44 bytes) is copied here. This will work since 'movem' will have + updated src, dst and n. (Except with failing src.) + + Since we want to keep src accurate, we can't use + __asm_copy_from_user_N with N != (1, 2, 4); it updates dst and + retn, but not src (by design; it's value is ignored elsewhere). */ + + while (n >= 4) + { + __asm_copy_from_user_4 (dst, src, retn); + n -= 4; + + if (retn) + goto copy_exception_bytes; + } + + /* If we get here, there were no memory read faults. */ + switch (n) + { + /* These copies are at least "naturally aligned" (so we don't have + to check each byte), due to the src alignment code before the + movem loop. The *_3 case *will* get the correct count for retn. */ + case 0: + /* This case deliberately left in (if you have doubts check the + generated assembly code). */ + break; + case 1: + __asm_copy_from_user_1 (dst, src, retn); + break; + case 2: + __asm_copy_from_user_2 (dst, src, retn); + break; + case 3: + __asm_copy_from_user_3 (dst, src, retn); + break; + } + + /* If we get here, retn correctly reflects the number of failing + bytes. */ + return retn; + +copy_exception_bytes: + /* We already have "retn" bytes cleared, and need to clear the + remaining "n" bytes. A non-optimized simple byte-for-byte in-line + memset is preferred here, since this isn't speed-critical code and + we'd rather have this a leaf-function than calling memset. */ + { + char *endp; + for (endp = dst + n; dst < endp; dst++) + *dst = 0; + } + + return retn + n; +} + +/* Zero userspace. */ + +unsigned long +__do_clear_user (void __user *pto, unsigned long pn) +{ + /* We want the parameters put in special registers. + Make sure the compiler is able to make something useful of this. + As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). + + FIXME: Comment for old gcc version. Check. + If gcc was allright, it really would need no temporaries, and no + stack space to save stuff on. */ + + register char *dst __asm__ ("r13") = pto; + register int n __asm__ ("r12") = pn; + register int retn __asm__ ("r10") = 0; + + + if (((unsigned long) dst & 3) != 0 + /* Don't align if we wouldn't copy more than a few bytes. */ + && n >= 3) + { + if ((unsigned long) dst & 1) + { + __asm_clear_1 (dst, retn); + n--; + } + + if ((unsigned long) dst & 2) + { + __asm_clear_2 (dst, retn); + n -= 2; + } + } + + /* Decide which copying method to use. + FIXME: This number is from the "ordinary" kernel memset. */ + if (n >= 48) + { + /* For large clears we use 'movem' */ + + /* It is not optimal to tell the compiler about clobbering any + call-saved registers; that will move the saving/restoring of + those registers to the function prologue/epilogue, and make + non-movem sizes suboptimal. + + This method is not foolproof; it assumes that the "asm reg" + declarations at the beginning of the function really are used + here (beware: they may be moved to temporary registers). + This way, we do not have to save/move the registers around into + temporaries; we can safely use them straight away. + + If you want to check that the allocation was right; then + check the equalities in the first comment. It should say + something like "r13=r13, r11=r11, r12=r12". */ + __asm__ volatile ("\ + .ifnc %0%1%2,$r13$r12$r10 \n\ + .err \n\ + .endif \n\ + \n\ + ;; Save the registers we'll clobber in the movem process \n\ + ;; on the stack. Don't mention them to gcc, it will only be \n\ + ;; upset. \n\ + subq 11*4,$sp \n\ + movem $r10,[$sp] \n\ + \n\ + clear.d $r0 \n\ + clear.d $r1 \n\ + clear.d $r2 \n\ + clear.d $r3 \n\ + clear.d $r4 \n\ + clear.d $r5 \n\ + clear.d $r6 \n\ + clear.d $r7 \n\ + clear.d $r8 \n\ + clear.d $r9 \n\ + clear.d $r10 \n\ + clear.d $r11 \n\ + \n\ + ;; Now we've got this: \n\ + ;; r13 - dst \n\ + ;; r12 - n \n\ + \n\ + ;; Update n for the first loop \n\ + subq 12*4,$r12 \n\ +0: \n\ + subq 12*4,$r12 \n\ +1: \n\ + bge 0b \n\ + movem $r11,[$r13+] \n\ + \n\ + addq 12*4,$r12 ;; compensate for last loop underflowing n \n\ + \n\ + ;; Restore registers from stack \n\ + movem [$sp+],$r10 \n\ +2: \n\ + .section .fixup,\"ax\" \n\ +3: \n\ + movem [$sp],$r10 \n\ + addq 12*4,$r10 \n\ + addq 12*4,$r13 \n\ + movem $r10,[$sp] \n\ + jump 0b \n\ + clear.d $r10 \n\ + \n\ + .previous \n\ + .section __ex_table,\"a\" \n\ + .dword 1b,3b \n\ + .previous" + + /* Outputs */ : "=r" (dst), "=r" (n), "=r" (retn) + /* Inputs */ : "0" (dst), "1" (n), "2" (retn) + /* Clobber */ : "r11"); + } + + while (n >= 16) + { + __asm_clear_16 (dst, retn); + n -= 16; + } + + /* Having a separate by-four loops cuts down on cache footprint. + FIXME: Test with and without; increasing switch to be 0..15. */ + while (n >= 4) + { + __asm_clear_4 (dst, retn); + n -= 4; + } + + switch (n) + { + case 0: + break; + case 1: + __asm_clear_1 (dst, retn); + break; + case 2: + __asm_clear_2 (dst, retn); + break; + case 3: + __asm_clear_3 (dst, retn); + break; + } + + return retn; +} diff --git a/arch/cris/arch-v32/mm/Makefile b/arch/cris/arch-v32/mm/Makefile new file mode 100644 index 000000000000..9146f88484b1 --- /dev/null +++ b/arch/cris/arch-v32/mm/Makefile @@ -0,0 +1,3 @@ +# Makefile for the Linux/cris parts of the memory manager. + +obj-y := mmu.o init.o tlb.o intmem.o diff --git a/arch/cris/arch-v32/mm/init.c b/arch/cris/arch-v32/mm/init.c new file mode 100644 index 000000000000..f2fba27d822c --- /dev/null +++ b/arch/cris/arch-v32/mm/init.c @@ -0,0 +1,174 @@ +/* + * Set up paging and the MMU. + * + * Copyright (C) 2000-2003, Axis Communications AB. + * + * Authors: Bjorn Wesen <bjornw@axis.com> + * Tobias Anderberg <tobiasa@axis.com>, CRISv32 port. + */ +#include <linux/config.h> +#include <linux/mmzone.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/mm.h> +#include <linux/config.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/types.h> +#include <asm/mmu.h> +#include <asm/io.h> +#include <asm/mmu_context.h> +#include <asm/arch/hwregs/asm/mmu_defs_asm.h> +#include <asm/arch/hwregs/supp_reg.h> + +extern void tlb_init(void); + +/* + * The kernel is already mapped with linear mapping at kseg_c so there's no + * need to map it with a page table. However, head.S also temporarily mapped it + * at kseg_4 thus the ksegs are set up again. Also clear the TLB and do various + * other paging stuff. + */ +void __init +cris_mmu_init(void) +{ + unsigned long mmu_config; + unsigned long mmu_kbase_hi; + unsigned long mmu_kbase_lo; + unsigned short mmu_page_id; + + /* + * Make sure the current pgd table points to something sane, even if it + * is most probably not used until the next switch_mm. + */ + per_cpu(current_pgd, smp_processor_id()) = init_mm.pgd; + +#ifdef CONFIG_SMP + { + pgd_t **pgd; + pgd = (pgd_t**)&per_cpu(current_pgd, smp_processor_id()); + SUPP_BANK_SEL(1); + SUPP_REG_WR(RW_MM_TLB_PGD, pgd); + SUPP_BANK_SEL(2); + SUPP_REG_WR(RW_MM_TLB_PGD, pgd); + } +#endif + + /* Initialise the TLB. Function found in tlb.c. */ + tlb_init(); + + /* Enable exceptions and initialize the kernel segments. */ + mmu_config = ( REG_STATE(mmu, rw_mm_cfg, we, on) | + REG_STATE(mmu, rw_mm_cfg, acc, on) | + REG_STATE(mmu, rw_mm_cfg, ex, on) | + REG_STATE(mmu, rw_mm_cfg, inv, on) | + REG_STATE(mmu, rw_mm_cfg, seg_f, linear) | + REG_STATE(mmu, rw_mm_cfg, seg_e, linear) | + REG_STATE(mmu, rw_mm_cfg, seg_d, page) | + REG_STATE(mmu, rw_mm_cfg, seg_c, linear) | + REG_STATE(mmu, rw_mm_cfg, seg_b, linear) | +#ifndef CONFIG_ETRAXFS_SIM + REG_STATE(mmu, rw_mm_cfg, seg_a, page) | +#else + REG_STATE(mmu, rw_mm_cfg, seg_a, linear) | +#endif + REG_STATE(mmu, rw_mm_cfg, seg_9, page) | + REG_STATE(mmu, rw_mm_cfg, seg_8, page) | + REG_STATE(mmu, rw_mm_cfg, seg_7, page) | + REG_STATE(mmu, rw_mm_cfg, seg_6, page) | + REG_STATE(mmu, rw_mm_cfg, seg_5, page) | + REG_STATE(mmu, rw_mm_cfg, seg_4, page) | + REG_STATE(mmu, rw_mm_cfg, seg_3, page) | + REG_STATE(mmu, rw_mm_cfg, seg_2, page) | + REG_STATE(mmu, rw_mm_cfg, seg_1, page) | + REG_STATE(mmu, rw_mm_cfg, seg_0, page)); + + mmu_kbase_hi = ( REG_FIELD(mmu, rw_mm_kbase_hi, base_f, 0x0) | + REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 0x8) | + REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 0x0) | +#ifndef CONFIG_ETRAXFS_SIM + REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0x4) | +#else + REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0x0) | +#endif + REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) | +#ifndef CONFIG_ETRAXFS_SIM + REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0x0) | +#else + REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa) | +#endif + REG_FIELD(mmu, rw_mm_kbase_hi, base_9, 0x0) | + REG_FIELD(mmu, rw_mm_kbase_hi, base_8, 0x0)); + + mmu_kbase_lo = ( REG_FIELD(mmu, rw_mm_kbase_lo, base_7, 0x0) | + REG_FIELD(mmu, rw_mm_kbase_lo, base_6, 0x0) | + REG_FIELD(mmu, rw_mm_kbase_lo, base_5, 0x0) | + REG_FIELD(mmu, rw_mm_kbase_lo, base_4, 0x0) | + REG_FIELD(mmu, rw_mm_kbase_lo, base_3, 0x0) | + REG_FIELD(mmu, rw_mm_kbase_lo, base_2, 0x0) | + REG_FIELD(mmu, rw_mm_kbase_lo, base_1, 0x0) | + REG_FIELD(mmu, rw_mm_kbase_lo, base_0, 0x0)); + + mmu_page_id = REG_FIELD(mmu, rw_mm_tlb_hi, pid, 0); + + /* Update the instruction MMU. */ + SUPP_BANK_SEL(BANK_IM); + SUPP_REG_WR(RW_MM_CFG, mmu_config); + SUPP_REG_WR(RW_MM_KBASE_HI, mmu_kbase_hi); + SUPP_REG_WR(RW_MM_KBASE_LO, mmu_kbase_lo); + SUPP_REG_WR(RW_MM_TLB_HI, mmu_page_id); + + /* Update the data MMU. */ + SUPP_BANK_SEL(BANK_DM); + SUPP_REG_WR(RW_MM_CFG, mmu_config); + SUPP_REG_WR(RW_MM_KBASE_HI, mmu_kbase_hi); + SUPP_REG_WR(RW_MM_KBASE_LO, mmu_kbase_lo); + SUPP_REG_WR(RW_MM_TLB_HI, mmu_page_id); + + SPEC_REG_WR(SPEC_REG_PID, 0); + + /* + * The MMU has been enabled ever since head.S but just to make it + * totally obvious enable it here as well. + */ + SUPP_BANK_SEL(BANK_GC); + SUPP_REG_WR(RW_GC_CFG, 0xf); /* IMMU, DMMU, ICache, DCache on */ +} + +void __init +paging_init(void) +{ + int i; + unsigned long zones_size[MAX_NR_ZONES]; + + printk("Setting up paging and the MMU.\n"); + + /* Clear out the init_mm.pgd that will contain the kernel's mappings. */ + for(i = 0; i < PTRS_PER_PGD; i++) + swapper_pg_dir[i] = __pgd(0); + + cris_mmu_init(); + + /* + * Initialize the bad page table and bad page to point to a couple of + * allocated pages. + */ + empty_zero_page = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); + memset((void *) empty_zero_page, 0, PAGE_SIZE); + + /* All pages are DMA'able in Etrax, so put all in the DMA'able zone. */ + zones_size[0] = ((unsigned long) high_memory - PAGE_OFFSET) >> PAGE_SHIFT; + + for (i = 1; i < MAX_NR_ZONES; i++) + zones_size[i] = 0; + + /* + * Use free_area_init_node instead of free_area_init, because it is + * designed for systems where the DRAM starts at an address + * substantially higher than 0, like us (we start at PAGE_OFFSET). This + * saves space in the mem_map page array. + */ + free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0); + + mem_map = contig_page_data.node_mem_map; +} diff --git a/arch/cris/arch-v32/mm/intmem.c b/arch/cris/arch-v32/mm/intmem.c new file mode 100644 index 000000000000..41ee7f7997fd --- /dev/null +++ b/arch/cris/arch-v32/mm/intmem.c @@ -0,0 +1,139 @@ +/* + * Simple allocator for internal RAM in ETRAX FS + * + * Copyright (c) 2004 Axis Communications AB. + */ + +#include <linux/list.h> +#include <linux/slab.h> +#include <asm/io.h> +#include <asm/arch/memmap.h> + +#define STATUS_FREE 0 +#define STATUS_ALLOCATED 1 + +struct intmem_allocation { + struct list_head entry; + unsigned int size; + unsigned offset; + char status; +}; + + +static struct list_head intmem_allocations; +static void* intmem_virtual; + +static void crisv32_intmem_init(void) +{ + static int initiated = 0; + if (!initiated) { + struct intmem_allocation* alloc = + (struct intmem_allocation*)kmalloc(sizeof *alloc, GFP_KERNEL); + INIT_LIST_HEAD(&intmem_allocations); + intmem_virtual = ioremap(MEM_INTMEM_START, MEM_INTMEM_SIZE); + initiated = 1; + alloc->size = MEM_INTMEM_SIZE; + alloc->offset = 0; + alloc->status = STATUS_FREE; + list_add_tail(&alloc->entry, &intmem_allocations); + } +} + +void* crisv32_intmem_alloc(unsigned size, unsigned align) +{ + struct intmem_allocation* allocation; + struct intmem_allocation* tmp; + void* ret = NULL; + + preempt_disable(); + crisv32_intmem_init(); + + list_for_each_entry_safe(allocation, tmp, &intmem_allocations, entry) { + int alignment = allocation->offset % align; + alignment = alignment ? align - alignment : alignment; + + if (allocation->status == STATUS_FREE && + allocation->size >= size + alignment) { + if (allocation->size > size + alignment) { + struct intmem_allocation* alloc = + (struct intmem_allocation*) + kmalloc(sizeof *alloc, GFP_ATOMIC); + alloc->status = STATUS_FREE; + alloc->size = allocation->size - size - alignment; + alloc->offset = allocation->offset + size; + list_add(&alloc->entry, &allocation->entry); + + if (alignment) { + struct intmem_allocation* tmp; + tmp = (struct intmem_allocation*) + kmalloc(sizeof *tmp, GFP_ATOMIC); + tmp->offset = allocation->offset; + tmp->size = alignment; + tmp->status = STATUS_FREE; + allocation->offset += alignment; + list_add_tail(&tmp->entry, &allocation->entry); + } + } + allocation->status = STATUS_ALLOCATED; + allocation->size = size; + ret = (void*)((int)intmem_virtual + allocation->offset); + } + } + preempt_enable(); + return ret; +} + +void crisv32_intmem_free(void* addr) +{ + struct intmem_allocation* allocation; + struct intmem_allocation* tmp; + + if (addr == NULL) + return; + + preempt_disable(); + crisv32_intmem_init(); + + list_for_each_entry_safe(allocation, tmp, &intmem_allocations, entry) { + if (allocation->offset == (int)(addr - intmem_virtual)) { + struct intmem_allocation* prev = + list_entry(allocation->entry.prev, + struct intmem_allocation, entry); + struct intmem_allocation* next = + list_entry(allocation->entry.next, + struct intmem_allocation, entry); + + allocation->status = STATUS_FREE; + /* Join with prev and/or next if also free */ + if (prev->status == STATUS_FREE) { + prev->size += allocation->size; + list_del(&allocation->entry); + kfree(allocation); + allocation = prev; + } + if (next->status == STATUS_FREE) { + allocation->size += next->size; + list_del(&next->entry); + kfree(next); + } + preempt_enable(); + return; + } + } + preempt_enable(); +} + +void* crisv32_intmem_phys_to_virt(unsigned long addr) +{ + return (void*)(addr - MEM_INTMEM_START+ + (unsigned long)intmem_virtual); +} + +unsigned long crisv32_intmem_virt_to_phys(void* addr) +{ + return (unsigned long)((unsigned long )addr - + (unsigned long)intmem_virtual + MEM_INTMEM_START); +} + + + diff --git a/arch/cris/arch-v32/mm/mmu.S b/arch/cris/arch-v32/mm/mmu.S new file mode 100644 index 000000000000..27b70e5006af --- /dev/null +++ b/arch/cris/arch-v32/mm/mmu.S @@ -0,0 +1,141 @@ +/* + * Copyright (C) 2003 Axis Communications AB + * + * Authors: Mikael Starvik (starvik@axis.com) + * + * Code for the fault low-level handling routines. + * + */ + +#include <asm/page.h> +#include <asm/pgtable.h> + +; Save all register. Must save in same order as struct pt_regs. +.macro SAVE_ALL + subq 12, $sp + move $erp, [$sp] + subq 4, $sp + move $srp, [$sp] + subq 4, $sp + move $ccs, [$sp] + subq 4, $sp + move $spc, [$sp] + subq 4, $sp + move $mof, [$sp] + subq 4, $sp + move $srs, [$sp] + subq 4, $sp + move.d $acr, [$sp] + subq 14*4, $sp + movem $r13, [$sp] + subq 4, $sp + move.d $r10, [$sp] +.endm + +; Bus fault handler. Extracts relevant information and calls mm subsystem +; to handle the fault. +.macro MMU_BUS_FAULT_HANDLER handler, mmu, we, ex + .globl \handler +\handler: + SAVE_ALL + move \mmu, $srs ; Select MMU support register bank + move.d $sp, $r11 ; regs + moveq 1, $r12 ; protection fault + moveq \we, $r13 ; write exception? + orq \ex << 1, $r13 ; execute? + move $s3, $r10 ; rw_mm_cause + and.d ~8191, $r10 ; Get faulting page start address + + jsr do_page_fault + nop + ba ret_from_intr + nop +.endm + +; Refill handler. Three cases may occur: +; 1. PMD and PTE exists in mm subsystem but not in TLB +; 2. PMD exists but not PTE +; 3. PMD doesn't exist +; The code below handles case 1 and calls the mm subsystem for case 2 and 3. +; Do not touch this code without very good reasons and extensive testing. +; Note that the code is optimized to minimize stalls (makes the code harder +; to read). +; +; Each page is 8 KB. Each PMD holds 8192/4 PTEs (each PTE is 4 bytes) so each +; PMD holds 16 MB of virtual memory. +; Bits 0-12 : Offset within a page +; Bits 13-23 : PTE offset within a PMD +; Bits 24-31 : PMD offset within the PGD + +.macro MMU_REFILL_HANDLER handler, mmu + .globl \handler +\handler: + subq 4, $sp +; (The pipeline stalls for one cycle; $sp used as address in the next cycle.) + move $srs, [$sp] + subq 4, $sp + move \mmu, $srs ; Select MMU support register bank + move.d $acr, [$sp] + subq 4, $sp + move.d $r0, [$sp] +#ifdef CONFIG_SMP + move $s7, $acr ; PGD +#else + move.d per_cpu__current_pgd, $acr ; PGD +#endif + ; Look up PMD in PGD + move $s3, $r0 ; rw_mm_cause + lsrq 24, $r0 ; Get PMD index into PGD (bit 24-31) + move.d [$acr], $acr ; PGD for the current process + addi $r0.d, $acr, $acr + move $s3, $r0 ; rw_mm_cause + move.d [$acr], $acr ; Get PMD + beq 1f + ; Look up PTE in PMD + lsrq PAGE_SHIFT, $r0 + and.w PAGE_MASK, $acr ; Remove PMD flags + and.d 0x7ff, $r0 ; Get PTE index into PMD (bit 13-23) + addi $r0.d, $acr, $acr + move.d [$acr], $acr ; Get PTE + beq 2f + move.d [$sp+], $r0 ; Pop r0 in delayslot + ; Store in TLB + move $acr, $s5 + ; Return + move.d [$sp+], $acr + move [$sp], $srs + addq 4, $sp + rete + rfe +1: ; PMD missing, let the mm subsystem fix it up. + move.d [$sp+], $r0 ; Pop r0 +2: ; PTE missing, let the mm subsystem fix it up. + move.d [$sp+], $acr + move [$sp], $srs + addq 4, $sp + SAVE_ALL + move \mmu, $srs + move.d $sp, $r11 ; regs + clear.d $r12 ; Not a protection fault + move.w PAGE_MASK, $acr + move $s3, $r10 ; rw_mm_cause + btstq 9, $r10 ; Check if write access + smi $r13 + and.w PAGE_MASK, $r10 ; Get VPN (virtual address) + jsr do_page_fault + and.w $acr, $r10 + ; Return + ba ret_from_intr + nop +.endm + + ; This is the MMU bus fault handlers. + +MMU_REFILL_HANDLER i_mmu_refill, 1 +MMU_BUS_FAULT_HANDLER i_mmu_invalid, 1, 0, 0 +MMU_BUS_FAULT_HANDLER i_mmu_access, 1, 0, 0 +MMU_BUS_FAULT_HANDLER i_mmu_execute, 1, 0, 1 +MMU_REFILL_HANDLER d_mmu_refill, 2 +MMU_BUS_FAULT_HANDLER d_mmu_invalid, 2, 0, 0 +MMU_BUS_FAULT_HANDLER d_mmu_access, 2, 0, 0 +MMU_BUS_FAULT_HANDLER d_mmu_write, 2, 1, 0 diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c new file mode 100644 index 000000000000..8233406798d3 --- /dev/null +++ b/arch/cris/arch-v32/mm/tlb.c @@ -0,0 +1,208 @@ +/* + * Low level TLB handling. + * + * Copyright (C) 2000-2003, Axis Communications AB. + * + * Authors: Bjorn Wesen <bjornw@axis.com> + * Tobias Anderberg <tobiasa@axis.com>, CRISv32 port. + */ + +#include <asm/tlb.h> +#include <asm/mmu_context.h> +#include <asm/arch/hwregs/asm/mmu_defs_asm.h> +#include <asm/arch/hwregs/supp_reg.h> + +#define UPDATE_TLB_SEL_IDX(val) \ +do { \ + unsigned long tlb_sel; \ + \ + tlb_sel = REG_FIELD(mmu, rw_mm_tlb_sel, idx, val); \ + SUPP_REG_WR(RW_MM_TLB_SEL, tlb_sel); \ +} while(0) + +#define UPDATE_TLB_HILO(tlb_hi, tlb_lo) \ +do { \ + SUPP_REG_WR(RW_MM_TLB_HI, tlb_hi); \ + SUPP_REG_WR(RW_MM_TLB_LO, tlb_lo); \ +} while(0) + +/* + * The TLB can host up to 256 different mm contexts at the same time. The running + * context is found in the PID register. Each TLB entry contains a page_id that + * has to match the PID register to give a hit. page_id_map keeps track of which + * mm's is assigned to which page_id's, making sure it's known when to + * invalidate TLB entries. + * + * The last page_id is never running, it is used as an invalid page_id so that + * it's possible to make TLB entries that will nerver match. + * + * Note; the flushes needs to be atomic otherwise an interrupt hander that uses + * vmalloc'ed memory might cause a TLB load in the middle of a flush. + */ + +/* Flush all TLB entries. */ +void +__flush_tlb_all(void) +{ + int i; + int mmu; + unsigned long flags; + unsigned long mmu_tlb_hi; + unsigned long mmu_tlb_sel; + + /* + * Mask with 0xf so similar TLB entries aren't written in the same 4-way + * entry group. + */ + local_save_flags(flags); + local_irq_disable(); + + for (mmu = 1; mmu <= 2; mmu++) { + SUPP_BANK_SEL(mmu); /* Select the MMU */ + for (i = 0; i < NUM_TLB_ENTRIES; i++) { + /* Store invalid entry */ + mmu_tlb_sel = REG_FIELD(mmu, rw_mm_tlb_sel, idx, i); + + mmu_tlb_hi = (REG_FIELD(mmu, rw_mm_tlb_hi, pid, INVALID_PAGEID) + | REG_FIELD(mmu, rw_mm_tlb_hi, vpn, i & 0xf)); + + SUPP_REG_WR(RW_MM_TLB_SEL, mmu_tlb_sel); + SUPP_REG_WR(RW_MM_TLB_HI, mmu_tlb_hi); + SUPP_REG_WR(RW_MM_TLB_LO, 0); + } + } + + local_irq_restore(flags); +} + +/* Flush an entire user address space. */ +void +__flush_tlb_mm(struct mm_struct *mm) +{ + int i; + int mmu; + unsigned long flags; + unsigned long page_id; + unsigned long tlb_hi; + unsigned long mmu_tlb_hi; + + page_id = mm->context.page_id; + + if (page_id == NO_CONTEXT) + return; + + /* Mark the TLB entries that match the page_id as invalid. */ + local_save_flags(flags); + local_irq_disable(); + + for (mmu = 1; mmu <= 2; mmu++) { + SUPP_BANK_SEL(mmu); + for (i = 0; i < NUM_TLB_ENTRIES; i++) { + UPDATE_TLB_SEL_IDX(i); + + /* Get the page_id */ + SUPP_REG_RD(RW_MM_TLB_HI, tlb_hi); + + /* Check if the page_id match. */ + if ((tlb_hi & 0xff) == page_id) { + mmu_tlb_hi = (REG_FIELD(mmu, rw_mm_tlb_hi, pid, + INVALID_PAGEID) + | REG_FIELD(mmu, rw_mm_tlb_hi, vpn, + i & 0xf)); + + UPDATE_TLB_HILO(mmu_tlb_hi, 0); + } + } + } + + local_irq_restore(flags); +} + +/* Invalidate a single page. */ +void +__flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) +{ + int i; + int mmu; + unsigned long page_id; + unsigned long flags; + unsigned long tlb_hi; + unsigned long mmu_tlb_hi; + + page_id = vma->vm_mm->context.page_id; + + if (page_id == NO_CONTEXT) + return; + + addr &= PAGE_MASK; + + /* + * Invalidate those TLB entries that match both the mm context and the + * requested virtual address. + */ + local_save_flags(flags); + local_irq_disable(); + + for (mmu = 1; mmu <= 2; mmu++) { + SUPP_BANK_SEL(mmu); + for (i = 0; i < NUM_TLB_ENTRIES; i++) { + UPDATE_TLB_SEL_IDX(i); + SUPP_REG_RD(RW_MM_TLB_HI, tlb_hi); + + /* Check if page_id and address matches */ + if (((tlb_hi & 0xff) == page_id) && + ((tlb_hi & PAGE_MASK) == addr)) { + mmu_tlb_hi = REG_FIELD(mmu, rw_mm_tlb_hi, pid, + INVALID_PAGEID) | addr; + + UPDATE_TLB_HILO(mmu_tlb_hi, 0); + } + } + } + + local_irq_restore(flags); +} + +/* + * Initialize the context related info for a new mm_struct + * instance. + */ + +int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + mm->context.page_id = NO_CONTEXT; + return 0; +} + +/* Called in schedule() just before actually doing the switch_to. */ +void +switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + int cpu = smp_processor_id(); + + /* Make sure there is a MMU context. */ + spin_lock(&next->page_table_lock); + get_mmu_context(next); + cpu_set(cpu, next->cpu_vm_mask); + spin_unlock(&next->page_table_lock); + + /* + * Remember the pgd for the fault handlers. Keep a seperate copy of it + * because current and active_mm might be invalid at points where + * there's still a need to derefer the pgd. + */ + per_cpu(current_pgd, cpu) = next->pgd; + + /* Switch context in the MMU. */ + if (tsk && tsk->thread_info) + { + SPEC_REG_WR(SPEC_REG_PID, next->context.page_id | tsk->thread_info->tls); + } + else + { + SPEC_REG_WR(SPEC_REG_PID, next->context.page_id); + } +} + diff --git a/arch/cris/arch-v32/output_arch.ld b/arch/cris/arch-v32/output_arch.ld new file mode 100644 index 000000000000..d60a57db0ec2 --- /dev/null +++ b/arch/cris/arch-v32/output_arch.ld @@ -0,0 +1,2 @@ +/* At the time of this writing, there's no equivalent ld option. */ +OUTPUT_ARCH (crisv32) diff --git a/arch/cris/arch-v32/vmlinux.lds.S b/arch/cris/arch-v32/vmlinux.lds.S new file mode 100644 index 000000000000..adb94605d92a --- /dev/null +++ b/arch/cris/arch-v32/vmlinux.lds.S @@ -0,0 +1,134 @@ +/* ld script to make the Linux/CRIS kernel + * Authors: Bjorn Wesen (bjornw@axis.com) + * + * It is VERY DANGEROUS to fiddle around with the symbols in this + * script. It is for example quite vital that all generated sections + * that are used are actually named here, otherwise the linker will + * put them at the end, where the init stuff is which is FREED after + * the kernel has booted. + */ + +#include <linux/config.h> +#include <asm-generic/vmlinux.lds.h> + +jiffies = jiffies_64; +SECTIONS +{ + . = DRAM_VIRTUAL_BASE; + dram_start = .; + ebp_start = .; + + /* The boot section is only necessary until the VCS top level testbench */ + /* includes both flash and DRAM. */ + .boot : { *(.boot) } + + . = DRAM_VIRTUAL_BASE + 0x4000; /* See head.S and pages reserved at the start. */ + + _text = .; /* Text and read-only data. */ + text_start = .; /* Lots of aliases. */ + _stext = .; + __stext = .; + .text : { + *(.text) + SCHED_TEXT + LOCK_TEXT + *(.fixup) + *(.text.__*) + } + + _etext = . ; /* End of text section. */ + __etext = .; + + . = ALIGN(4); /* Exception table. */ + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + RODATA + + . = ALIGN (4); + ___data_start = . ; + __Sdata = . ; + .data : { /* Data */ + *(.data) + } + __edata = . ; /* End of data section. */ + _edata = . ; + + . = ALIGN(8192); /* init_task and stack, must be aligned. */ + .data.init_task : { *(.data.init_task) } + + . = ALIGN(8192); /* Init code and data. */ + __init_begin = .; + .init.text : { + _sinittext = .; + *(.init.text) + _einittext = .; + } + .init.data : { *(.init.data) } + . = ALIGN(16); + __setup_start = .; + .init.setup : { *(.init.setup) } + __setup_end = .; + __start___param = .; + __param : { *(__param) } + __stop___param = .; + .initcall.init : { + __initcall_start = .; + *(.initcall1.init); + *(.initcall2.init); + *(.initcall3.init); + *(.initcall4.init); + *(.initcall5.init); + *(.initcall6.init); + *(.initcall7.init); + __initcall_end = .; + } + + .con_initcall.init : { + __con_initcall_start = .; + *(.con_initcall.init) + __con_initcall_end = .; + } + SECURITY_INIT + + __per_cpu_start = .; + .data.percpu : { *(.data.percpu) } + __per_cpu_end = .; + + .init.ramfs : { + __initramfs_start = .; + *(.init.ramfs) + __initramfs_end = .; + /* + * We fill to the next page, so we can discard all init + * pages without needing to consider what payload might be + * appended to the kernel image. + */ + FILL (0); + . = ALIGN (8192); + } + + __vmlinux_end = .; /* Last address of the physical file. */ + __init_end = .; + + __data_end = . ; /* Move to _edata? */ + __bss_start = .; /* BSS. */ + .bss : { + *(COMMON) + *(.bss) + } + + . = ALIGN (0x20); + _end = .; + __end = .; + + /* Sections to be discarded */ + /DISCARD/ : { + *(.text.exit) + *(.data.exit) + *(.exitcall.exit) + } + + dram_end = dram_start + CONFIG_ETRAX_DRAM_SIZE*1024*1024; +} diff --git a/arch/cris/defconfig b/arch/cris/defconfig index 32c9c987dbaa..142a10818af3 100644 --- a/arch/cris/defconfig +++ b/arch/cris/defconfig @@ -1,22 +1,27 @@ # # Automatically generated make config: don't edit +# Linux kernel version: 2.6.11 +# Mon Jun 20 13:42:02 2005 # CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_CRIS=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y CONFIG_BROKEN_ON_SMP=y # # General setup # -CONFIG_SWAP=y +CONFIG_LOCALVERSION="" +# CONFIG_SWAP is not set # CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set @@ -24,16 +29,19 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set # # Loadable module support @@ -45,23 +53,28 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_SMP is not set CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc" -CONFIG_ETRAX_WATCHDOG=y -CONFIG_ETRAX_WATCHDOG_NICE_DOGGY=y +# CONFIG_ETRAX_WATCHDOG is not set CONFIG_ETRAX_FAST_TIMER=y # CONFIG_PREEMPT is not set +# CONFIG_OOM_REBOOT is not set # # Hardware setup # -CONFIG_ETRAX100LX=y -# CONFIG_ETRAX100LX_V2 is not set +# CONFIG_ETRAX100LX is not set +CONFIG_ETRAX100LX_V2=y # CONFIG_SVINTO_SIM is not set +# CONFIG_ETRAXFS is not set +# CONFIG_ETRAXFS_SIM is not set CONFIG_ETRAX_ARCH_V10=y -CONFIG_ETRAX_DRAM_SIZE=16 +# CONFIG_ETRAX_ARCH_V32 is not set +CONFIG_ETRAX_DRAM_SIZE=32 CONFIG_ETRAX_FLASH_BUSWIDTH=2 -CONFIG_CRIS_LOW_MAP=y -CONFIG_ETRAX_DRAM_VIRTUAL_BASE=60000000 +CONFIG_ETRAX_FLASH1_SIZE=4 +CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000 CONFIG_ETRAX_PA_LEDS=y # CONFIG_ETRAX_PB_LEDS is not set # CONFIG_ETRAX_CSP0_LEDS is not set @@ -81,13 +94,13 @@ CONFIG_ETRAX_RESCUE_SER0=y # CONFIG_ETRAX_RESCUE_SER1 is not set # CONFIG_ETRAX_RESCUE_SER2 is not set # CONFIG_ETRAX_RESCUE_SER3 is not set -CONFIG_ETRAX_DEF_R_WAITSTATES=0x95f8 -CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x104 +CONFIG_ETRAX_DEF_R_WAITSTATES=0x95a6 +CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x4 CONFIG_ETRAX_SDRAM=y -CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x00e03636 +CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x09e05757 CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80008002 CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1d -CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0xf0 +CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0x00 CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=0x00 CONFIG_ETRAX_DEF_R_PORT_PB_DIR=0x1e CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0xf3 @@ -97,16 +110,17 @@ CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0xf3 # Drivers for built-in interfaces # CONFIG_ETRAX_ETHERNET=y -CONFIG_NET_ETHERNET=y # CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y CONFIG_ETRAX_SERIAL=y -CONFIG_ETRAX_SERIAL_FAST_TIMER=y +# CONFIG_ETRAX_SERIAL_FAST_TIMER is not set +# CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is not set +CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=5 CONFIG_ETRAX_SERIAL_PORT0=y -# CONFIG_CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT is not set -CONFIG_CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT=y -# CONFIG_CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN is not set -CONFIG_CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN=y +# CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT is not set +CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT=y +# CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN is not set +CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN=y CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE=y # CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PA is not set # CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set @@ -121,10 +135,10 @@ CONFIG_ETRAX_SER0_DSR_ON_PB_BIT=-1 CONFIG_ETRAX_SER0_CD_ON_PB_BIT=-1 # CONFIG_ETRAX_SERIAL_PORT1 is not set CONFIG_ETRAX_SERIAL_PORT2=y -# CONFIG_CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT is not set -CONFIG_CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT=y -# CONFIG_CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN is not set -CONFIG_CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN=y +# CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT is not set +CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT=y +# CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN is not set +CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN=y CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE=y # CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA is not set # CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PB is not set @@ -138,44 +152,51 @@ CONFIG_ETRAX_SER2_RI_ON_PB_BIT=-1 CONFIG_ETRAX_SER2_DSR_ON_PB_BIT=-1 CONFIG_ETRAX_SER2_CD_ON_PB_BIT=-1 # CONFIG_ETRAX_SERIAL_PORT3 is not set -# CONFIG_ETRAX_RS485 is not set -# CONFIG_ETRAX_IDE is not set -# CONFIG_IDE is not set -# CONFIG_ETRAX_USB_HOST is not set +CONFIG_ETRAX_RS485=y +# CONFIG_ETRAX_RS485_ON_PA is not set +# CONFIG_ETRAX_RS485_DISABLE_RECEIVER is not set +CONFIG_ETRAX_IDE=y +CONFIG_ETRAX_IDE_DELAY=15 +CONFIG_ETRAX_IDE_PB7_RESET=y +# CONFIG_ETRAX_IDE_G27_RESET is not set +CONFIG_ETRAX_USB_HOST=y +CONFIG_ETRAX_USB_HOST_PORT1=y +CONFIG_ETRAX_USB_HOST_PORT2=y CONFIG_ETRAX_AXISFLASHMAP=y CONFIG_ETRAX_PTABLE_SECTOR=65536 -CONFIG_MTD=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_OBSOLETE_CHIPS=y -CONFIG_MTD_AMDSTD=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CONCAT=y # CONFIG_ETRAX_I2C is not set -CONFIG_ETRAX_GPIO=y -CONFIG_ETRAX_PA_BUTTON_BITMASK=0x02 -CONFIG_ETRAX_PA_CHANGEABLE_DIR=0x00 -CONFIG_ETRAX_PA_CHANGEABLE_BITS=0xFF -CONFIG_ETRAX_PB_CHANGEABLE_DIR=0x00 -CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF -# CONFIG_ETRAX_RTC is not set +# CONFIG_ETRAX_GPIO is not set +CONFIG_ETRAX_RTC=y +CONFIG_ETRAX_DS1302=y +# CONFIG_ETRAX_PCF8563 is not set +CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT=y +CONFIG_ETRAX_DS1302_RSTBIT=0 +CONFIG_ETRAX_DS1302_SCLBIT=1 +CONFIG_ETRAX_DS1302_SDABIT=0 +CONFIG_ETRAX_DS1302_TRICKLE_CHARGE=0 # # Generic Driver Options # +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # # Memory Technology Devices (MTD) # +CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CONCAT=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # # User Modules And Translation Layers # +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set @@ -183,14 +204,30 @@ CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF # # RAM/ROM/Flash chip drivers # +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +CONFIG_MTD_OBSOLETE_CHIPS=y +CONFIG_MTD_AMDSTD=y # CONFIG_MTD_SHARP is not set # CONFIG_MTD_JEDEC is not set @@ -204,11 +241,13 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # Self-contained MTD device drivers # # CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set CONFIG_MTD_MTDRAM=y CONFIG_MTDRAM_TOTAL_SIZE=0 CONFIG_MTDRAM_ERASE_SIZE=64 CONFIG_MTDRAM_ABS_POS=0x0 # CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers @@ -235,11 +274,25 @@ CONFIG_MTDRAM_ABS_POS=0x0 # Block devices # # CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # Multi-device support (RAID and LVM) @@ -249,6 +302,28 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # # ATA/ATAPI/MFM/RLL support # +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -258,7 +333,6 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support @@ -288,6 +362,9 @@ CONFIG_INET=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set # # IP: Virtual Server Configuration @@ -301,11 +378,10 @@ CONFIG_NETFILTER=y # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -# CONFIG_IP_NF_COMPAT_IPFWADM is not set # # SCTP Configuration (EXPERIMENTAL) @@ -323,12 +399,12 @@ CONFIG_NETFILTER=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set # # Network testing @@ -338,7 +414,26 @@ CONFIG_NETFILTER=y # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set -# CONFIG_BT is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +# CONFIG_BT_SCO is not set +CONFIG_BT_RFCOMM=y +# CONFIG_BT_RFCOMM_TTY is not set +CONFIG_BT_BNEP=y +# CONFIG_BT_BNEP_MC_FILTER is not set +# CONFIG_BT_BNEP_PROTO_FILTER is not set +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=y +# CONFIG_BT_HCIUSB_SCO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -348,6 +443,7 @@ CONFIG_NETDEVICES=y # # Ethernet (10 or 100Mbit) # +CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # @@ -389,11 +485,19 @@ CONFIG_NETDEVICES=y # # Input device support # -# CONFIG_INPUT is not set +CONFIG_INPUT=y # # Userland interfaces # +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set # # Input I/O drivers @@ -404,10 +508,25 @@ CONFIG_SERIO=y # CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set # # Input Device Drivers # +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set # # Character devices @@ -426,7 +545,6 @@ CONFIG_SERIO=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_QIC02_TAPE is not set # # IPMI @@ -441,13 +559,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -469,10 +584,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -485,7 +605,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # DOS/FAT/NT Filesystems # -# CONFIG_FAT_FS is not set +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # @@ -497,6 +618,7 @@ CONFIG_SYSFS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -512,7 +634,15 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_JFFS_FS=y CONFIG_JFFS_FS_VERBOSE=0 -# CONFIG_JFFS2_FS is not set +# CONFIG_JFFS_PROC_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_NAND is not set +# CONFIG_JFFS2_FS_NOR_ECC is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -530,14 +660,13 @@ CONFIG_NFS_V3=y # CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -# CONFIG_EXPORTFS is not set CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set # @@ -557,8 +686,120 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SOUND is not set # +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# # USB support # +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# + +# +# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +# CONFIG_USB_USBNET is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_TEST is not set + +# +# USB ATM/DSL drivers +# # # USB Gadget Support @@ -568,14 +809,17 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # -# CONFIG_PROFILE is not set +# CONFIG_PROFILING is not set +# CONFIG_SYSTEM_PROFILER is not set # CONFIG_ETRAX_KGDB is not set # CONFIG_DEBUG_INFO is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_DEBUG_NMI_OOPS is not set # # Security options # +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # @@ -584,8 +828,14 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_CRYPTO is not set # +# Hardware crypto devices +# + +# # Library routines # -# CONFIG_CRC32 is not set +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/cris/kernel/Makefile b/arch/cris/kernel/Makefile index 1546a0e74047..c8e8ea570989 100644 --- a/arch/cris/kernel/Makefile +++ b/arch/cris/kernel/Makefile @@ -1,4 +1,4 @@ -# $Id: Makefile,v 1.10 2004/05/14 10:18:12 starvik Exp $ +# $Id: Makefile,v 1.12 2004/10/19 13:07:43 starvik Exp $ # # Makefile for the linux kernel. # @@ -10,6 +10,7 @@ obj-y := process.o traps.o irq.o ptrace.o setup.o \ obj-$(CONFIG_MODULES) += crisksyms.o obj-$(CONFIG_MODULES) += module.o +obj-$(CONFIG_SYSTEM_PROFILER) += profile.o clean: diff --git a/arch/cris/kernel/crisksyms.c b/arch/cris/kernel/crisksyms.c index 7141bbecd7e4..85833d704ebb 100644 --- a/arch/cris/kernel/crisksyms.c +++ b/arch/cris/kernel/crisksyms.c @@ -27,13 +27,13 @@ extern void __Udiv(void); extern void __Umod(void); extern void __Div(void); extern void __Mod(void); +extern void __ashldi3(void); extern void __ashrdi3(void); -extern void iounmap(void *addr); +extern void __lshrdi3(void); +extern void iounmap(volatile void * __iomem); /* Platform dependent support */ EXPORT_SYMBOL(dump_thread); -EXPORT_SYMBOL(enable_irq); -EXPORT_SYMBOL(disable_irq); EXPORT_SYMBOL(kernel_thread); EXPORT_SYMBOL(get_cmos_time); EXPORT_SYMBOL(loops_per_usec); @@ -57,7 +57,9 @@ EXPORT_SYMBOL(__Udiv); EXPORT_SYMBOL(__Umod); EXPORT_SYMBOL(__Div); EXPORT_SYMBOL(__Mod); +EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__ashrdi3); +EXPORT_SYMBOL(__lshrdi3); /* Memory functions */ EXPORT_SYMBOL(__ioremap); @@ -69,23 +71,10 @@ EXPORT_SYMBOL(__down); EXPORT_SYMBOL(__down_interruptible); EXPORT_SYMBOL(__down_trylock); -/* Export shadow registers for the CPU I/O pins */ -EXPORT_SYMBOL(genconfig_shadow); -EXPORT_SYMBOL(port_pa_data_shadow); -EXPORT_SYMBOL(port_pa_dir_shadow); -EXPORT_SYMBOL(port_pb_data_shadow); -EXPORT_SYMBOL(port_pb_dir_shadow); -EXPORT_SYMBOL(port_pb_config_shadow); -EXPORT_SYMBOL(port_g_data_shadow); - /* Userspace access functions */ EXPORT_SYMBOL(__copy_user_zeroing); EXPORT_SYMBOL(__copy_user); -/* Cache flush functions */ -EXPORT_SYMBOL(flush_etrax_cache); -EXPORT_SYMBOL(prepare_rx_descriptor); - #undef memcpy #undef memset extern void * memset(void *, int, __kernel_size_t); diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c index d848b9407457..30deaf1b728a 100644 --- a/arch/cris/kernel/irq.c +++ b/arch/cris/kernel/irq.c @@ -12,8 +12,6 @@ * shouldn't result in any weird surprises, and installing new handlers * should be easier. * - * Notice Linux/CRIS: these routines do not care about SMP - * */ /* @@ -24,6 +22,7 @@ #include <linux/config.h> #include <linux/module.h> #include <linux/ptrace.h> +#include <linux/irq.h> #include <linux/kernel_stat.h> #include <linux/signal.h> @@ -36,84 +35,56 @@ #include <linux/init.h> #include <linux/seq_file.h> #include <linux/errno.h> -#include <linux/bitops.h> +#include <linux/spinlock.h> #include <asm/io.h> -/* Defined in arch specific irq.c */ -extern void arch_setup_irq(int irq); -extern void arch_free_irq(int irq); - -void -disable_irq(unsigned int irq_nr) -{ - unsigned long flags; - - local_save_flags(flags); - local_irq_disable(); - mask_irq(irq_nr); - local_irq_restore(flags); -} - -void -enable_irq(unsigned int irq_nr) +void ack_bad_irq(unsigned int irq) { - unsigned long flags; - local_save_flags(flags); - local_irq_disable(); - unmask_irq(irq_nr); - local_irq_restore(flags); + printk("unexpected IRQ trap at vector %02x\n", irq); } -unsigned long -probe_irq_on() -{ - return 0; -} - -EXPORT_SYMBOL(probe_irq_on); - -int -probe_irq_off(unsigned long x) -{ - return 0; -} - -EXPORT_SYMBOL(probe_irq_off); - -/* - * Initial irq handlers. - */ - -static struct irqaction *irq_action[NR_IRQS]; - int show_interrupts(struct seq_file *p, void *v) { - int i = *(loff_t *) v; + int i = *(loff_t *) v, j; struct irqaction * action; unsigned long flags; + if (i == 0) { + seq_printf(p, " "); + for (j=0; j<NR_CPUS; j++) + if (cpu_online(j)) + seq_printf(p, "CPU%d ",j); + seq_putc(p, '\n'); + } + if (i < NR_IRQS) { - local_irq_save(flags); - action = irq_action[i]; - if (!action) + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; + if (!action) goto skip; - seq_printf(p, "%2d: %10u %c %s", - i, kstat_this_cpu.irqs[i], - (action->flags & SA_INTERRUPT) ? '+' : ' ', - action->name); - for (action = action->next; action; action = action->next) { - seq_printf(p, ",%s %s", - (action->flags & SA_INTERRUPT) ? " +" : "", - action->name); - } + seq_printf(p, "%3d: ",i); +#ifndef CONFIG_SMP + seq_printf(p, "%10u ", kstat_irqs(i)); +#else + for (j = 0; j < NR_CPUS; j++) + if (cpu_online(j)) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); +#endif + seq_printf(p, " %14s", irq_desc[i].handler->typename); + seq_printf(p, " %s", action->name); + + for (action=action->next; action; action = action->next) + seq_printf(p, ", %s", action->name); + seq_putc(p, '\n'); skip: - local_irq_restore(flags); + spin_unlock_irqrestore(&irq_desc[i].lock, flags); } return 0; } + /* called by the assembler IRQ entry functions defined in irq.h * to dispatch the interrupts to registred handlers * interrupts are disabled upon entry - depending on if the @@ -123,164 +94,17 @@ skip: asmlinkage void do_IRQ(int irq, struct pt_regs * regs) { - struct irqaction *action; - int do_random, cpu; - int ret, retval = 0; - - cpu = smp_processor_id(); - irq_enter(); - kstat_cpu(cpu).irqs[irq - FIRST_IRQ]++; - action = irq_action[irq - FIRST_IRQ]; - - if (action) { - if (!(action->flags & SA_INTERRUPT)) - local_irq_enable(); - do_random = 0; - do { - ret = action->handler(irq, action->dev_id, regs); - if (ret == IRQ_HANDLED) - do_random |= action->flags; - retval |= ret; - action = action->next; - } while (action); - - if (retval != 1) { - if (retval) { - printk("irq event %d: bogus retval mask %x\n", - irq, retval); - } else { - printk("irq %d: nobody cared\n", irq); - } - } - - if (do_random & SA_SAMPLE_RANDOM) - add_interrupt_randomness(irq); - local_irq_disable(); - } - irq_exit(); -} - -/* this function links in a handler into the chain of handlers for the - given irq, and if the irq has never been registred, the appropriate - handler is entered into the interrupt vector -*/ - -int setup_irq(int irq, struct irqaction * new) -{ - int shared = 0; - struct irqaction *old, **p; - unsigned long flags; - - p = irq_action + irq - FIRST_IRQ; - if ((old = *p) != NULL) { - /* Can't share interrupts unless both agree to */ - if (!(old->flags & new->flags & SA_SHIRQ)) - return -EBUSY; - - /* Can't share interrupts unless both are same type */ - if ((old->flags ^ new->flags) & SA_INTERRUPT) - return -EBUSY; - - /* add new interrupt at end of irq queue */ - do { - p = &old->next; - old = *p; - } while (old); - shared = 1; - } - - if (new->flags & SA_SAMPLE_RANDOM) - rand_initialize_irq(irq); - - local_save_flags(flags); - local_irq_disable(); - *p = new; - - if (!shared) { - /* if the irq wasn't registred before, enter it into the vector table - and unmask it physically - */ - arch_setup_irq(irq); - unmask_irq(irq); - } - - local_irq_restore(flags); - return 0; -} - -/* this function is called by a driver to register an irq handler - Valid flags: - SA_INTERRUPT -> it's a fast interrupt, handler called with irq disabled and - no signal checking etc is performed upon exit - SA_SHIRQ -> the interrupt can be shared between different handlers, the handler - is required to check if the irq was "aimed" at it explicitely - SA_RANDOM -> the interrupt will add to the random generators entropy -*/ - -int request_irq(unsigned int irq, - irqreturn_t (*handler)(int, void *, struct pt_regs *), - unsigned long irqflags, - const char * devname, - void *dev_id) -{ - int retval; - struct irqaction * action; - - if(!handler) - return -EINVAL; - - /* allocate and fill in a handler structure and setup the irq */ - - action = (struct irqaction *)kmalloc(sizeof(struct irqaction), GFP_KERNEL); - if (!action) - return -ENOMEM; - - action->handler = handler; - action->flags = irqflags; - cpus_clear(action->mask); - action->name = devname; - action->next = NULL; - action->dev_id = dev_id; - - retval = setup_irq(irq, action); - - if (retval) - kfree(action); - return retval; -} - -EXPORT_SYMBOL(request_irq); - -void free_irq(unsigned int irq, void *dev_id) -{ - struct irqaction * action, **p; - unsigned long flags; - - if (irq >= NR_IRQS) { - printk("Trying to free IRQ%d\n",irq); - return; + unsigned long sp; + irq_enter(); + sp = rdsp(); + if (unlikely((sp & (PAGE_SIZE - 1)) < (PAGE_SIZE/8))) { + printk("do_IRQ: stack overflow: %lX\n", sp); + show_stack(NULL, (unsigned long *)sp); } - for (p = irq - FIRST_IRQ + irq_action; (action = *p) != NULL; p = &action->next) { - if (action->dev_id != dev_id) - continue; - - /* Found it - now free it */ - local_save_flags(flags); - local_irq_disable(); - *p = action->next; - if (!irq_action[irq - FIRST_IRQ]) { - mask_irq(irq); - arch_free_irq(irq); - } - local_irq_restore(flags); - kfree(action); - return; - } - printk("Trying to free free IRQ%d\n",irq); + __do_IRQ(irq, regs); + irq_exit(); } -EXPORT_SYMBOL(free_irq); - void weird_irq(void) { local_irq_disable(); @@ -288,10 +112,3 @@ void weird_irq(void) while(1); } -#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL) -/* Used by other archs to show/control IRQ steering during SMP */ -void __init -init_irq_proc(void) -{ -} -#endif diff --git a/arch/cris/kernel/module.c b/arch/cris/kernel/module.c index f1d3e784f30c..11b867df8617 100644 --- a/arch/cris/kernel/module.c +++ b/arch/cris/kernel/module.c @@ -32,7 +32,7 @@ void *module_alloc(unsigned long size) { if (size == 0) return NULL; - return vmalloc(size); + return vmalloc_exec(size); } @@ -59,26 +59,8 @@ int apply_relocate(Elf32_Shdr *sechdrs, unsigned int relsec, struct module *me) { - unsigned int i; - Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr; - Elf32_Sym *sym; - uint32_t *location; - - DEBUGP("Applying relocate section %u to %u\n", relsec, - sechdrs[relsec].sh_info); - for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { - /* This is where to make the change */ - location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_offset - + rel[i].r_offset; - /* This is the symbol it is referring to. Note that all - undefined symbols have been resolved. */ - sym = (Elf32_Sym *)sechdrs[symindex].sh_addr - + ELF32_R_SYM(rel[i].r_info); - - /* We add the value into the location given */ - *location += sym->st_value; - } - return 0; + printk(KERN_ERR "module %s: REL relocation unsupported\n", me->name); + return -ENOEXEC; } int apply_relocate_add(Elf32_Shdr *sechdrs, @@ -90,7 +72,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, unsigned int i; Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr; - DEBUGP ("Applying relocate section %u to %u\n", relsec, + DEBUGP ("Applying add relocate section %u to %u\n", relsec, sechdrs[relsec].sh_info); for (i = 0; i < sechdrs[relsec].sh_size / sizeof (*rela); i++) { @@ -103,7 +85,18 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, Elf32_Sym *sym = ((Elf32_Sym *)sechdrs[symindex].sh_addr + ELF32_R_SYM (rela[i].r_info)); - *loc = sym->st_value + rela[i].r_addend; + switch (ELF32_R_TYPE(rela[i].r_info)) { + case R_CRIS_32: + *loc = sym->st_value + rela[i].r_addend; + break; + case R_CRIS_32_PCREL: + *loc = sym->st_value - (unsigned)loc + rela[i].r_addend - 4; + break; + default: + printk(KERN_ERR "module %s: Unknown relocation: %u\n", + me->name, ELF32_R_TYPE(rela[i].r_info)); + return -ENOEXEC; + } } return 0; diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c index 9f7cad7c7849..949a0e40e03c 100644 --- a/arch/cris/kernel/process.c +++ b/arch/cris/kernel/process.c @@ -1,4 +1,4 @@ -/* $Id: process.c,v 1.17 2004/04/05 13:53:48 starvik Exp $ +/* $Id: process.c,v 1.21 2005/03/04 08:16:17 starvik Exp $ * * linux/arch/cris/kernel/process.c * @@ -8,6 +8,18 @@ * Authors: Bjorn Wesen (bjornw@axis.com) * * $Log: process.c,v $ + * Revision 1.21 2005/03/04 08:16:17 starvik + * Merge of Linux 2.6.11. + * + * Revision 1.20 2005/01/18 05:57:22 starvik + * Renamed hlt_counter to cris_hlt_counter and made it global. + * + * Revision 1.19 2004/10/19 13:07:43 starvik + * Merge of Linux 2.6.9 + * + * Revision 1.18 2004/08/16 12:37:23 starvik + * Merge of Linux 2.6.8 + * * Revision 1.17 2004/04/05 13:53:48 starvik * Merge of Linux 2.6.5 * @@ -113,6 +125,7 @@ #include <linux/user.h> #include <linux/elfcore.h> #include <linux/mqueue.h> +#include <linux/reboot.h> //#define DEBUG @@ -160,18 +173,18 @@ EXPORT_SYMBOL(init_task); * region by enable_hlt/disable_hlt. */ -static int hlt_counter=0; +int cris_hlt_counter=0; void disable_hlt(void) { - hlt_counter++; + cris_hlt_counter++; } EXPORT_SYMBOL(disable_hlt); void enable_hlt(void) { - hlt_counter--; + cris_hlt_counter--; } EXPORT_SYMBOL(enable_hlt); @@ -194,27 +207,28 @@ void cpu_idle (void) /* endless idle loop with no priority at all */ while (1) { while (!need_resched()) { - void (*idle)(void) = pm_idle; - + void (*idle)(void); + /* + * Mark this as an RCU critical section so that + * synchronize_kernel() in the unload path waits + * for our completion. + */ + idle = pm_idle; if (!idle) idle = default_idle; - idle(); } schedule(); } - } void hard_reset_now (void); -void machine_restart(void) +void machine_restart(char *cmd) { hard_reset_now(); } -EXPORT_SYMBOL(machine_restart); - /* * Similar to machine_power_off, but don't shut off power. Add code * here to freeze the system for e.g. post-mortem debug purpose when @@ -225,16 +239,12 @@ void machine_halt(void) { } -EXPORT_SYMBOL(machine_halt); - /* If or when software power-off is implemented, add code here. */ void machine_power_off(void) { } -EXPORT_SYMBOL(machine_power_off); - /* * When a process does an "exec", machine state like FPU and debug * registers need to be reset. This is a hook function for that. diff --git a/arch/cris/kernel/profile.c b/arch/cris/kernel/profile.c new file mode 100644 index 000000000000..69c52189f044 --- /dev/null +++ b/arch/cris/kernel/profile.c @@ -0,0 +1,73 @@ +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/proc_fs.h> +#include <linux/types.h> +#include <asm/ptrace.h> +#include <asm/uaccess.h> + +#define SAMPLE_BUFFER_SIZE 8192 + +static char* sample_buffer; +static char* sample_buffer_pos; +static int prof_running = 0; + +void +cris_profile_sample(struct pt_regs* regs) +{ + if (!prof_running) + return; + if (user_mode(regs)) + *(unsigned int*)sample_buffer_pos = current->pid; + else + *(unsigned int*)sample_buffer_pos = 0; + *(unsigned int*)(sample_buffer_pos + 4) = instruction_pointer(regs); + sample_buffer_pos += 8; + if (sample_buffer_pos == sample_buffer + SAMPLE_BUFFER_SIZE) + sample_buffer_pos = sample_buffer; +} + +static ssize_t +read_cris_profile(struct file *file, char __user *buf, size_t count, loff_t *ppos) +{ + unsigned long p = *ppos; + if (p > SAMPLE_BUFFER_SIZE) + return 0; + if (p + count > SAMPLE_BUFFER_SIZE) + count = SAMPLE_BUFFER_SIZE - p; + if (copy_to_user(buf, sample_buffer + p,count)) + return -EFAULT; + memset(sample_buffer + p, 0, count); + *ppos += count; + return count; +} + +static ssize_t +write_cris_profile(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + sample_buffer_pos = sample_buffer; + memset(sample_buffer, 0, SAMPLE_BUFFER_SIZE); +} + +static struct file_operations cris_proc_profile_operations = { + .read = read_cris_profile, + .write = write_cris_profile, +}; + +static int +__init init_cris_profile(void) +{ + struct proc_dir_entry *entry; + sample_buffer = (char*)kmalloc(SAMPLE_BUFFER_SIZE, GFP_KERNEL); + sample_buffer_pos = sample_buffer; + entry = create_proc_entry("system_profile", S_IWUSR | S_IRUGO, NULL); + if (entry) { + entry->proc_fops = &cris_proc_profile_operations; + entry->size = SAMPLE_BUFFER_SIZE; + } + prof_running = 1; + return 0; +} + +__initcall(init_cris_profile); diff --git a/arch/cris/kernel/ptrace.c b/arch/cris/kernel/ptrace.c index e85a2fdd9acf..2b6363cbe985 100644 --- a/arch/cris/kernel/ptrace.c +++ b/arch/cris/kernel/ptrace.c @@ -8,6 +8,12 @@ * Authors: Bjorn Wesen * * $Log: ptrace.c,v $ + * Revision 1.10 2004/09/22 11:50:01 orjanf + * * Moved get_reg/put_reg to arch-specific files. + * * Added functions to access debug registers (CRISv32). + * * Added support for PTRACE_SINGLESTEP (CRISv32). + * * Added S flag to CCS_MASK (CRISv32). + * * Revision 1.9 2003/07/04 12:56:11 tobiasa * Moved arch-specific code to arch-specific files. * @@ -72,37 +78,6 @@ #include <asm/system.h> #include <asm/processor.h> -/* - * Get contents of register REGNO in task TASK. - */ -inline long get_reg(struct task_struct *task, unsigned int regno) -{ - /* USP is a special case, it's not in the pt_regs struct but - * in the tasks thread struct - */ - - if (regno == PT_USP) - return task->thread.usp; - else if (regno < PT_MAX) - return ((unsigned long *)user_regs(task->thread_info))[regno]; - else - return 0; -} - -/* - * Write contents of register REGNO in task TASK. - */ -inline int put_reg(struct task_struct *task, unsigned int regno, - unsigned long data) -{ - if (regno == PT_USP) - task->thread.usp = data; - else if (regno < PT_MAX) - ((unsigned long *)user_regs(task->thread_info))[regno] = data; - else - return -1; - return 0; -} /* notification of userspace execution resumption * - triggered by current->work.notify_resume diff --git a/arch/cris/kernel/setup.c b/arch/cris/kernel/setup.c index 6ec2671078bf..d11206e467ab 100644 --- a/arch/cris/kernel/setup.c +++ b/arch/cris/kernel/setup.c @@ -17,6 +17,7 @@ #include <asm/pgtable.h> #include <linux/seq_file.h> #include <linux/tty.h> +#include <linux/utsname.h> #include <asm/setup.h> @@ -29,7 +30,7 @@ struct screen_info screen_info; extern int root_mountflags; extern char _etext, _edata, _end; -static char command_line[COMMAND_LINE_SIZE] = { 0, }; +char cris_command_line[COMMAND_LINE_SIZE] = { 0, }; extern const unsigned long text_start, edata; /* set by the linker script */ extern unsigned long dram_start, dram_end; @@ -147,34 +148,35 @@ setup_arch(char **cmdline_p) paging_init(); - /* We don't use a command line yet, so just re-initialize it without - saving anything that might be there. */ - - *cmdline_p = command_line; + *cmdline_p = cris_command_line; #ifdef CONFIG_ETRAX_CMDLINE - strlcpy(command_line, CONFIG_ETRAX_CMDLINE, COMMAND_LINE_SIZE); - command_line[COMMAND_LINE_SIZE - 1] = '\0'; + if (!strcmp(cris_command_line, "")) { + strlcpy(cris_command_line, CONFIG_ETRAX_CMDLINE, COMMAND_LINE_SIZE); + cris_command_line[COMMAND_LINE_SIZE - 1] = '\0'; + } +#endif /* Save command line for future references. */ - memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE); + memcpy(saved_command_line, cris_command_line, COMMAND_LINE_SIZE); saved_command_line[COMMAND_LINE_SIZE - 1] = '\0'; -#endif /* give credit for the CRIS port */ show_etrax_copyright(); + + /* Setup utsname */ + strcpy(system_utsname.machine, cris_machine_name); } static void *c_start(struct seq_file *m, loff_t *pos) { - /* We only got one CPU... */ - return *pos < 1 ? (void *)1 : NULL; + return *pos < NR_CPUS ? (void *)(int)(*pos + 1): NULL; } static void *c_next(struct seq_file *m, void *v, loff_t *pos) { ++*pos; - return NULL; + return c_start(m, pos); } static void c_stop(struct seq_file *m, void *v) diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c index 6c28b0e7f7b4..fa2d4323da25 100644 --- a/arch/cris/kernel/time.c +++ b/arch/cris/kernel/time.c @@ -1,4 +1,4 @@ -/* $Id: time.c,v 1.14 2004/06/01 05:38:11 starvik Exp $ +/* $Id: time.c,v 1.18 2005/03/04 08:16:17 starvik Exp $ * * linux/arch/cris/kernel/time.c * @@ -30,6 +30,7 @@ #include <linux/bcd.h> #include <linux/timex.h> #include <linux/init.h> +#include <linux/profile.h> u64 jiffies_64 = INITIAL_JIFFIES; @@ -214,6 +215,21 @@ update_xtime_from_cmos(void) } } +extern void cris_profile_sample(struct pt_regs* regs); + +void +cris_do_profile(struct pt_regs* regs) +{ + +#if CONFIG_SYSTEM_PROFILER + cris_profile_sample(regs); +#endif + +#if CONFIG_PROFILING + profile_tick(CPU_PROFILING, regs); +#endif +} + /* * Scheduler clock - returns current time in nanosec units. */ diff --git a/arch/cris/kernel/traps.c b/arch/cris/kernel/traps.c index d4dfa050e3a5..520d92205fed 100644 --- a/arch/cris/kernel/traps.c +++ b/arch/cris/kernel/traps.c @@ -1,4 +1,4 @@ -/* $Id: traps.c,v 1.9 2004/05/11 12:28:26 starvik Exp $ +/* $Id: traps.c,v 1.11 2005/01/24 16:03:19 orjanf Exp $ * * linux/arch/cris/traps.c * @@ -20,13 +20,15 @@ static int kstack_depth_to_print = 24; +extern int raw_printk(const char *fmt, ...); + void show_trace(unsigned long * stack) { unsigned long addr, module_start, module_end; extern char _stext, _etext; int i; - printk("\nCall Trace: "); + raw_printk("\nCall Trace: "); i = 1; module_start = VMALLOC_START; @@ -37,7 +39,7 @@ void show_trace(unsigned long * stack) /* This message matches "failing address" marked s390 in ksymoops, so lines containing it will not be filtered out by ksymoops. */ - printk ("Failing address 0x%lx\n", (unsigned long)stack); + raw_printk ("Failing address 0x%lx\n", (unsigned long)stack); break; } stack++; @@ -54,8 +56,8 @@ void show_trace(unsigned long * stack) (addr <= (unsigned long) &_etext)) || ((addr >= module_start) && (addr <= module_end))) { if (i && ((i % 8) == 0)) - printk("\n "); - printk("[<%08lx>] ", addr); + raw_printk("\n "); + raw_printk("[<%08lx>] ", addr); i++; } } @@ -96,25 +98,59 @@ show_stack(struct task_struct *task, unsigned long *sp) stack = sp; - printk("\nStack from %08lx:\n ", (unsigned long)stack); + raw_printk("\nStack from %08lx:\n ", (unsigned long)stack); for(i = 0; i < kstack_depth_to_print; i++) { if (((long) stack & (THREAD_SIZE-1)) == 0) break; if (i && ((i % 8) == 0)) - printk("\n "); + raw_printk("\n "); if (__get_user (addr, stack)) { /* This message matches "failing address" marked s390 in ksymoops, so lines containing it will not be filtered out by ksymoops. */ - printk ("Failing address 0x%lx\n", (unsigned long)stack); + raw_printk ("Failing address 0x%lx\n", (unsigned long)stack); break; } stack++; - printk("%08lx ", addr); + raw_printk("%08lx ", addr); } show_trace(sp); } +static void (*nmi_handler)(struct pt_regs*); +extern void arch_enable_nmi(void); + +void set_nmi_handler(void (*handler)(struct pt_regs*)) +{ + nmi_handler = handler; + arch_enable_nmi(); +} + +void handle_nmi(struct pt_regs* regs) +{ + if (nmi_handler) + nmi_handler(regs); +} + +#ifdef CONFIG_DEBUG_NMI_OOPS +void oops_nmi_handler(struct pt_regs* regs) +{ + stop_watchdog(); + raw_printk("NMI!\n"); + show_registers(regs); +} + +static int +__init oops_nmi_register(void) +{ + set_nmi_handler(oops_nmi_handler); + return 0; +} + +__initcall(oops_nmi_register); + +#endif + #if 0 /* displays a short stack trace */ @@ -123,9 +159,9 @@ show_stack() { unsigned long *sp = (unsigned long *)rdusp(); int i; - printk("Stack dump [0x%08lx]:\n", (unsigned long)sp); + raw_printk("Stack dump [0x%08lx]:\n", (unsigned long)sp); for(i = 0; i < 16; i++) - printk("sp + %d: 0x%08lx\n", i*4, sp[i]); + raw_printk("sp + %d: 0x%08lx\n", i*4, sp[i]); return 0; } #endif @@ -142,3 +178,9 @@ trap_init(void) { /* Nothing needs to be done */ } + +void spinning_cpu(void* addr) +{ + raw_printk("CPU %d spinning on %X\n", smp_processor_id(), addr); + dump_stack(); +} diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c index 03254b9eded1..934c51078cce 100644 --- a/arch/cris/mm/fault.c +++ b/arch/cris/mm/fault.c @@ -6,6 +6,38 @@ * Authors: Bjorn Wesen * * $Log: fault.c,v $ + * Revision 1.20 2005/03/04 08:16:18 starvik + * Merge of Linux 2.6.11. + * + * Revision 1.19 2005/01/14 10:07:59 starvik + * Fixed warning. + * + * Revision 1.18 2005/01/12 08:10:14 starvik + * Readded the change of frametype when handling kernel page fault fixup + * for v10. This is necessary to avoid that the CPU remakes the faulting + * access. + * + * Revision 1.17 2005/01/11 13:53:05 starvik + * Use raw_printk. + * + * Revision 1.16 2004/12/17 11:39:41 starvik + * SMP support. + * + * Revision 1.15 2004/11/23 18:36:18 starvik + * Stack is now non-executable. + * Signal handler trampolines are placed in a reserved page mapped into all + * processes. + * + * Revision 1.14 2004/11/23 07:10:21 starvik + * Moved find_fixup_code to generic code. + * + * Revision 1.13 2004/11/23 07:00:54 starvik + * Actually use the execute permission bit in the MMU. This makes it possible + * to prevent e.g. attacks where executable code is put on the stack. + * + * Revision 1.12 2004/09/29 06:16:04 starvik + * Use instruction_pointer + * * Revision 1.11 2004/05/14 07:58:05 starvik * Merge of changes from 2.4 * @@ -103,6 +135,7 @@ extern int find_fixup_code(struct pt_regs *); extern void die_if_kernel(const char *, struct pt_regs *, long); +extern int raw_printk(const char *fmt, ...); /* debug of low-level TLB reload */ #undef DEBUG @@ -118,7 +151,8 @@ extern void die_if_kernel(const char *, struct pt_regs *, long); /* current active page directory */ -volatile pgd_t *current_pgd; +volatile DEFINE_PER_CPU(pgd_t *,current_pgd); +unsigned long cris_signal_return_page; /* * This routine handles page faults. It determines the address, @@ -146,8 +180,9 @@ do_page_fault(unsigned long address, struct pt_regs *regs, struct vm_area_struct * vma; siginfo_t info; - D(printk("Page fault for %X at %X, prot %d write %d\n", - address, regs->erp, protection, writeaccess)); + D(printk("Page fault for %lX on %X at %lX, prot %d write %d\n", + address, smp_processor_id(), instruction_pointer(regs), + protection, writeaccess)); tsk = current; @@ -175,8 +210,19 @@ do_page_fault(unsigned long address, struct pt_regs *regs, !user_mode(regs)) goto vmalloc_fault; + /* When stack execution is not allowed we store the signal + * trampolines in the reserved cris_signal_return_page. + * Handle this in the exact same way as vmalloc (we know + * that the mapping is there and is valid so no need to + * call handle_mm_fault). + */ + if (cris_signal_return_page && + address == cris_signal_return_page && + !protection && user_mode(regs)) + goto vmalloc_fault; + /* we can and should enable interrupts at this point */ - sti(); + local_irq_enable(); mm = tsk->mm; info.si_code = SEGV_MAPERR; @@ -220,7 +266,10 @@ do_page_fault(unsigned long address, struct pt_regs *regs, /* first do some preliminary protection checks */ - if (writeaccess) { + if (writeaccess == 2){ + if (!(vma->vm_flags & VM_EXEC)) + goto bad_area; + } else if (writeaccess == 1) { if (!(vma->vm_flags & VM_WRITE)) goto bad_area; } else { @@ -234,14 +283,14 @@ do_page_fault(unsigned long address, struct pt_regs *regs, * the fault. */ - switch (handle_mm_fault(mm, vma, address, writeaccess)) { - case 1: + switch (handle_mm_fault(mm, vma, address, writeaccess & 1)) { + case VM_FAULT_MINOR: tsk->min_flt++; break; - case 2: + case VM_FAULT_MAJOR: tsk->maj_flt++; break; - case 0: + case VM_FAULT_SIGBUS: goto do_sigbus; default: goto out_of_memory; @@ -292,10 +341,10 @@ do_page_fault(unsigned long address, struct pt_regs *regs, */ if ((unsigned long) (address) < PAGE_SIZE) - printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); + raw_printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); else - printk(KERN_ALERT "Unable to handle kernel access"); - printk(" at virtual address %08lx\n",address); + raw_printk(KERN_ALERT "Unable to handle kernel access"); + raw_printk(" at virtual address %08lx\n",address); die_if_kernel("Oops", regs, (writeaccess << 1) | protection); @@ -346,10 +395,11 @@ vmalloc_fault: int offset = pgd_index(address); pgd_t *pgd, *pgd_k; + pud_t *pud, *pud_k; pmd_t *pmd, *pmd_k; pte_t *pte_k; - pgd = (pgd_t *)current_pgd + offset; + pgd = (pgd_t *)per_cpu(current_pgd, smp_processor_id()) + offset; pgd_k = init_mm.pgd + offset; /* Since we're two-level, we don't need to do both @@ -364,8 +414,13 @@ vmalloc_fault: * it exists. */ - pmd = pmd_offset(pgd, address); - pmd_k = pmd_offset(pgd_k, address); + pud = pud_offset(pgd, address); + pud_k = pud_offset(pgd_k, address); + if (!pud_present(*pud_k)) + goto no_context; + + pmd = pmd_offset(pud, address); + pmd_k = pmd_offset(pud_k, address); if (!pmd_present(*pmd_k)) goto bad_area_nosemaphore; @@ -385,3 +440,19 @@ vmalloc_fault: return; } } + +/* Find fixup code. */ +int +find_fixup_code(struct pt_regs *regs) +{ + const struct exception_table_entry *fixup; + + if ((fixup = search_exception_tables(instruction_pointer(regs))) != 0) { + /* Adjust the instruction pointer in the stackframe. */ + instruction_pointer(regs) = fixup->fixup; + arch_fixup(regs); + return 1; + } + + return 0; +} diff --git a/arch/cris/mm/ioremap.c b/arch/cris/mm/ioremap.c index 6b9130bfb6c1..ebba11e270fa 100644 --- a/arch/cris/mm/ioremap.c +++ b/arch/cris/mm/ioremap.c @@ -14,9 +14,10 @@ #include <asm/pgalloc.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> +#include <asm/arch/memmap.h> extern inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, - unsigned long phys_addr, unsigned long flags) + unsigned long phys_addr, pgprot_t prot) { unsigned long end; @@ -31,9 +32,7 @@ extern inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned l printk("remap_area_pte: page already exists\n"); BUG(); } - set_pte(pte, mk_pte_phys(phys_addr, __pgprot(_PAGE_PRESENT | __READABLE | - __WRITEABLE | _PAGE_GLOBAL | - _PAGE_KERNEL | flags))); + set_pte(pte, mk_pte_phys(phys_addr, prot)); address += PAGE_SIZE; phys_addr += PAGE_SIZE; pte++; @@ -41,7 +40,7 @@ extern inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned l } static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size, - unsigned long phys_addr, unsigned long flags) + unsigned long phys_addr, pgprot_t prot) { unsigned long end; @@ -56,7 +55,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned lo pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address); if (!pte) return -ENOMEM; - remap_area_pte(pte, address, end - address, address + phys_addr, flags); + remap_area_pte(pte, address, end - address, address + phys_addr, prot); address = (address + PMD_SIZE) & PMD_MASK; pmd++; } while (address && (address < end)); @@ -64,7 +63,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned lo } static int remap_area_pages(unsigned long address, unsigned long phys_addr, - unsigned long size, unsigned long flags) + unsigned long size, pgprot_t prot) { int error; pgd_t * dir; @@ -77,13 +76,19 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr, BUG(); spin_lock(&init_mm.page_table_lock); do { + pud_t *pud; pmd_t *pmd; - pmd = pmd_alloc(&init_mm, dir, address); + error = -ENOMEM; + pud = pud_alloc(&init_mm, dir, address); + if (!pud) + break; + pmd = pmd_alloc(&init_mm, pud, address); + if (!pmd) break; if (remap_area_pmd(pmd, address, end - address, - phys_addr + address, flags)) + phys_addr + address, prot)) break; error = 0; address = (address + PGDIR_SIZE) & PGDIR_MASK; @@ -107,9 +112,9 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr, * have to convert them into an offset in a page-aligned mapping, but the * caller shouldn't need to know that small detail. */ -void * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags) +void __iomem * __ioremap_prot(unsigned long phys_addr, unsigned long size, pgprot_t prot) { - void * addr; + void __iomem * addr; struct vm_struct * area; unsigned long offset, last_addr; @@ -131,15 +136,36 @@ void * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flag area = get_vm_area(size, VM_IOREMAP); if (!area) return NULL; - addr = area->addr; - if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) { - vfree(addr); + addr = (void __iomem *)area->addr; + if (remap_area_pages((unsigned long) addr, phys_addr, size, prot)) { + vfree((void __force *)addr); return NULL; } - return (void *) (offset + (char *)addr); + return (void __iomem *) (offset + (char __iomem *)addr); +} + +void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags) +{ + return __ioremap_prot(phys_addr, size, + __pgprot(_PAGE_PRESENT | __READABLE | + __WRITEABLE | _PAGE_GLOBAL | + _PAGE_KERNEL | flags)); +} + +/** + * ioremap_nocache - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * Must be freed with iounmap. + */ + +void __iomem *ioremap_nocache (unsigned long phys_addr, unsigned long size) +{ + return __ioremap(phys_addr | MEM_NON_CACHEABLE, size, 0); } -void iounmap(void *addr) +void iounmap(volatile void __iomem *addr) { if (addr > high_memory) return vfree((void *) (PAGE_MASK & (unsigned long) addr)); diff --git a/arch/cris/mm/tlb.c b/arch/cris/mm/tlb.c index 23eca5ad7389..0df390a656cd 100644 --- a/arch/cris/mm/tlb.c +++ b/arch/cris/mm/tlb.c @@ -29,18 +29,6 @@ struct mm_struct *page_id_map[NUM_PAGEID]; static int map_replace_ptr = 1; /* which page_id_map entry to replace next */ -/* - * Initialize the context related info for a new mm_struct - * instance. - */ - -int -init_new_context(struct task_struct *tsk, struct mm_struct *mm) -{ - mm->context = NO_CONTEXT; - return 0; -} - /* the following functions are similar to those used in the PPC port */ static inline void @@ -60,12 +48,12 @@ alloc_context(struct mm_struct *mm) */ flush_tlb_mm(old_mm); - old_mm->context = NO_CONTEXT; + old_mm->context.page_id = NO_CONTEXT; } /* insert it into the page_id_map */ - mm->context = map_replace_ptr; + mm->context.page_id = map_replace_ptr; page_id_map[map_replace_ptr] = mm; map_replace_ptr++; @@ -81,7 +69,7 @@ alloc_context(struct mm_struct *mm) void get_mmu_context(struct mm_struct *mm) { - if(mm->context == NO_CONTEXT) + if(mm->context.page_id == NO_CONTEXT) alloc_context(mm); } @@ -96,11 +84,10 @@ get_mmu_context(struct mm_struct *mm) void destroy_context(struct mm_struct *mm) { - if(mm->context != NO_CONTEXT) { - D(printk("destroy_context %d (%p)\n", mm->context, mm)); + if(mm->context.page_id != NO_CONTEXT) { + D(printk("destroy_context %d (%p)\n", mm->context.page_id, mm)); flush_tlb_mm(mm); /* TODO this might be redundant ? */ - page_id_map[mm->context] = NULL; - /* mm->context = NO_CONTEXT; redundant.. mm will be freed */ + page_id_map[mm->context.page_id] = NULL; } } diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index 2b19372767eb..ec85c0d6c6da 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -74,6 +74,8 @@ config HIGHPTE with a lot of RAM, this can be wasteful of precious low memory. Setting this option will put user-space page tables in high memory. +source "mm/Kconfig" + choice prompt "uClinux kernel load address" depends on !MMU @@ -344,6 +346,8 @@ source "fs/Kconfig.binfmt" endmenu +source "net/Kconfig" + source "drivers/Kconfig" source "fs/Kconfig" diff --git a/arch/frv/defconfig b/arch/frv/defconfig new file mode 100644 index 000000000000..b6e4ca5efb59 --- /dev/null +++ b/arch/frv/defconfig @@ -0,0 +1,627 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11.8 +# Fri May 13 17:16:03 2005 +# +CONFIG_FRV=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_GENERIC_CALIBRATE_DELAY is not set +# CONFIG_GENERIC_HARDIRQS is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +# CONFIG_KOBJECT_UEVENT is not set +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Fujitsu FR-V system setup +# +CONFIG_MMU=y +CONFIG_FRV_OUTOFLINE_ATOMIC_OPS=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_FRV_DEFL_CACHE_WBACK is not set +# CONFIG_FRV_DEFL_CACHE_WBEHIND is not set +CONFIG_FRV_DEFL_CACHE_WTHRU=y +# CONFIG_FRV_DEFL_CACHE_DISABLED is not set + +# +# CPU core support +# +CONFIG_CPU_FR451=y +CONFIG_CPU_FR451_COMPILE=y +CONFIG_FRV_L1_CACHE_SHIFT=5 +CONFIG_MB93091_VDK=y +# CONFIG_MB93093_PDK is not set +CONFIG_MB93090_MB00=y +# CONFIG_MB93091_NO_MB is not set +# CONFIG_GPREL_DATA_8 is not set +CONFIG_GPREL_DATA_4=y +# CONFIG_GPREL_DATA_NONE is not set +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set +# CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCMCIA is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Executable formats +# +# CONFIG_BINFMT_ELF is not set +CONFIG_BINFMT_ELF_FDPIC=y +# CONFIG_BINFMT_MISC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +# CONFIG_FORK_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_KGDBOE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +CONFIG_NE2K_PCI=y +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_MULTIPORT is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISER4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_GDBSTUB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c index ef6865f0b979..767ebb55bd83 100644 --- a/arch/frv/kernel/setup.c +++ b/arch/frv/kernel/setup.c @@ -790,12 +790,10 @@ void __init setup_arch(char **cmdline_p) #ifndef CONFIG_GDBSTUB_UART0 __reg(UART0_BASE + UART_IER * 8) = 0; early_serial_setup(&__frv_uart0); -// register_serial(&__frv_uart0); #endif #ifndef CONFIG_GDBSTUB_UART1 __reg(UART1_BASE + UART_IER * 8) = 0; early_serial_setup(&__frv_uart1); -// register_serial(&__frv_uart1); #endif #if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH) diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c index d8d8f3d4304d..36a2dffc8ebd 100644 --- a/arch/frv/kernel/signal.c +++ b/arch/frv/kernel/signal.c @@ -536,10 +536,8 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) if (!user_mode(regs)) return 1; - if (current->flags & PF_FREEZE) { - refrigerator(0); + if (try_to_freeze()) goto no_signal; - } if (!oldset) oldset = ¤t->blocked; diff --git a/arch/frv/mb93090-mb00/pci-irq.c b/arch/frv/mb93090-mb00/pci-irq.c index 24622d89b1ca..af981bda015c 100644 --- a/arch/frv/mb93090-mb00/pci-irq.c +++ b/arch/frv/mb93090-mb00/pci-irq.c @@ -60,7 +60,7 @@ void __init pcibios_fixup_irqs(void) } } -void __init pcibios_penalize_isa_irq(int irq) +void __init pcibios_penalize_isa_irq(int irq, int active) { } diff --git a/arch/frv/mm/fault.c b/arch/frv/mm/fault.c index 41d02ac48233..8b3eb50c5105 100644 --- a/arch/frv/mm/fault.c +++ b/arch/frv/mm/fault.c @@ -163,13 +163,13 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear * the fault. */ switch (handle_mm_fault(mm, vma, ear0, write)) { - case 1: + case VM_FAULT_MINOR: current->min_flt++; break; - case 2: + case VM_FAULT_MAJOR: current->maj_flt++; break; - case 0: + case VM_FAULT_SIGBUS: goto do_sigbus; default: goto out_of_memory; diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index 62a89e812e3e..26698a49f153 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -55,6 +55,8 @@ source "fs/Kconfig.binfmt" endmenu +source "net/Kconfig" + source "drivers/base/Kconfig" source "drivers/mtd/Kconfig" @@ -65,7 +67,7 @@ source "drivers/ide/Kconfig" source "arch/h8300/Kconfig.ide" -source "net/Kconfig" +source "drivers/net/Kconfig" # # input - input/joystick depends on it. As does USB. @@ -179,6 +181,8 @@ source "drivers/serial/Kconfig" source "drivers/i2c/Kconfig" +source "drivers/hwmon/Kconfig" + source "drivers/usb/Kconfig" endmenu diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu index d9dd62a565a9..a380167a13cf 100644 --- a/arch/h8300/Kconfig.cpu +++ b/arch/h8300/Kconfig.cpu @@ -180,4 +180,7 @@ config CPU_H8S config PREEMPT bool "Preemptible Kernel" default n + +source "mm/Kconfig" + endmenu diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c index b5f83e9f04db..27f1fce64ce4 100644 --- a/arch/h8300/kernel/process.c +++ b/arch/h8300/kernel/process.c @@ -90,8 +90,6 @@ void machine_restart(char * __unused) __asm__("jmp @@0"); } -EXPORT_SYMBOL(machine_restart); - void machine_halt(void) { local_irq_disable(); @@ -99,8 +97,6 @@ void machine_halt(void) for (;;); } -EXPORT_SYMBOL(machine_halt); - void machine_power_off(void) { local_irq_disable(); @@ -108,8 +104,6 @@ void machine_power_off(void) for (;;); } -EXPORT_SYMBOL(machine_power_off); - void show_regs(struct pt_regs * regs) { printk("\nPC: %08lx Status: %02x", diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c index a4799d633ef4..5aab87eae1f9 100644 --- a/arch/h8300/kernel/signal.c +++ b/arch/h8300/kernel/signal.c @@ -517,10 +517,8 @@ asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset) if ((regs->ccr & 0x10)) return 1; - if (current->flags & PF_FREEZE) { - refrigerator(0); + if (try_to_freeze()) goto no_signal; - } current->thread.esp0 = (unsigned long) regs; diff --git a/arch/h8300/platform/h8300h/ptrace_h8300h.c b/arch/h8300/platform/h8300h/ptrace_h8300h.c index 18e51a7167d3..6ac93c05a1ae 100644 --- a/arch/h8300/platform/h8300h/ptrace_h8300h.c +++ b/arch/h8300/platform/h8300h/ptrace_h8300h.c @@ -245,12 +245,12 @@ static unsigned short *getnextpc(struct task_struct *child, unsigned short *pc) addr = h8300_get_reg(child, regno-1+PT_ER1); return (unsigned short *)addr; case relb: - if ((inst = 0x55) || isbranch(child,inst & 0x0f)) + if (inst == 0x55 || isbranch(child,inst & 0x0f)) pc = (unsigned short *)((unsigned long)pc + ((signed char)(*fetch_p))); return pc+1; /* skip myself */ case relw: - if ((inst = 0x5c) || isbranch(child,(*fetch_p & 0xf0) >> 4)) + if (inst == 0x5c || isbranch(child,(*fetch_p & 0xf0) >> 4)) pc = (unsigned short *)((unsigned long)pc + ((signed short)(*(pc+1)))); return pc+2; /* skip myself */ diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index dfd904f6883b..619d843ba231 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -68,7 +68,6 @@ config X86_VOYAGER config X86_NUMAQ bool "NUMAQ (IBM/Sequent)" - select DISCONTIGMEM select NUMA help This option is used for getting Linux to run on a (IBM/Sequent) NUMA @@ -455,8 +454,9 @@ config HPET_TIMER Choose N to continue using the legacy 8254 timer. config HPET_EMULATE_RTC - bool "Provide RTC interrupt" + bool depends on HPET_TIMER && RTC=y + default y config SMP bool "Symmetric multi-processing support" @@ -511,28 +511,7 @@ config SCHED_SMT cost of slightly increased overhead in some places. If unsure say N here. -config PREEMPT - bool "Preemptible Kernel" - help - This option reduces the latency of the kernel when reacting to - real-time or interactive events by allowing a low priority process to - be preempted even if it is in kernel mode executing a system call. - This allows applications to run more reliably even when the system is - under load. - - Say Y here if you are building a kernel for a desktop, embedded - or real-time system. Say N if you are unsure. - -config PREEMPT_BKL - bool "Preempt The Big Kernel Lock" - depends on PREEMPT - default y - help - This option reduces the latency of the kernel by making the - big kernel lock preemptible. - - Say Y here if you are building a kernel for a desktop system. - Say N if you are unsure. +source "kernel/Kconfig.preempt" config X86_UP_APIC bool "Local APIC support on uniprocessors" @@ -783,26 +762,49 @@ comment "NUMA (NUMA-Q) requires SMP, 64GB highmem support" comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI) -config DISCONTIGMEM - bool - depends on NUMA - default y - config HAVE_ARCH_BOOTMEM_NODE bool depends on NUMA default y -config HAVE_MEMORY_PRESENT +config ARCH_HAVE_MEMORY_PRESENT bool depends on DISCONTIGMEM default y config NEED_NODE_MEMMAP_SIZE bool - depends on DISCONTIGMEM + depends on DISCONTIGMEM || SPARSEMEM + default y + +config HAVE_ARCH_ALLOC_REMAP + bool + depends on NUMA default y +config ARCH_DISCONTIGMEM_ENABLE + def_bool y + depends on NUMA + +config ARCH_DISCONTIGMEM_DEFAULT + def_bool y + depends on NUMA + +config ARCH_SPARSEMEM_ENABLE + def_bool y + depends on NUMA + +config ARCH_SELECT_MEMORY_MODEL + def_bool y + depends on ARCH_SPARSEMEM_ENABLE + +source "mm/Kconfig" + +config HAVE_ARCH_EARLY_PFN_TO_NID + bool + default y + depends on NUMA + config HIGHPTE bool "Allocate 3rd-level pagetables from highmem" depends on HIGHMEM4G || HIGHMEM64G @@ -939,6 +941,43 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. +source kernel/Kconfig.hz + +config PHYSICAL_START + hex "Physical address where the kernel is loaded" if EMBEDDED + default "0x100000" + help + This gives the physical address where the kernel is loaded. + Primarily used in the case of kexec on panic where the + fail safe kernel needs to run at a different address than + the panic-ed kernel. + + Don't change this unless you know what you are doing. + +config KEXEC + bool "kexec system call (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is indepedent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similiarity to the exec system call. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. It may help to enable device hotplugging + support. As of this writing the exact hardware interface is + strongly in flux, so no good recommendation can be made. + +config CRASH_DUMP + bool "kernel crash dumps (EXPERIMENTAL)" + depends on EMBEDDED + depends on EXPERIMENTAL + depends on HIGHMEM + help + Generate crash dump after being started by kexec. endmenu @@ -1226,6 +1265,15 @@ config SCx200 This support is also available as a module. If compiled as a module, it will be called scx200. +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" + depends on SMP && HOTPLUG && EXPERIMENTAL + ---help--- + Say Y here to experiment with turning CPUs off and on. CPUs + can be controlled through /sys/devices/system/cpu. + + Say N. + source "drivers/pcmcia/Kconfig" source "drivers/pci/hotplug/Kconfig" @@ -1238,6 +1286,8 @@ source "fs/Kconfig.binfmt" endmenu +source "net/Kconfig" + source "drivers/Kconfig" source "fs/Kconfig" diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug index bfb2064f7104..5228c40a6fb2 100644 --- a/arch/i386/Kconfig.debug +++ b/arch/i386/Kconfig.debug @@ -18,6 +18,9 @@ config EARLY_PRINTK config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL + help + This option will cause messages to be printed if free stack space + drops below a certain limit. config KPROBES bool "Kprobes" diff --git a/arch/i386/Makefile b/arch/i386/Makefile index 1c36ca332a96..bf7c9ba709f3 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -17,6 +17,13 @@ # 20050320 Kianusch Sayah Karadji <kianusch@sk-tech.net> # Added support for GEODE CPU +HAS_BIARCH := $(call cc-option-yn, -m32) +ifeq ($(HAS_BIARCH),y) +AS := $(AS) --32 +LD := $(LD) -m elf_i386 +CC := $(CC) -m32 +endif + LDFLAGS := -m elf_i386 OBJCOPYFLAGS := -O binary -R .note -R .comment -S LDFLAGS_vmlinux := diff --git a/arch/i386/boot/Makefile b/arch/i386/boot/Makefile index 43cd6220ee49..1e71382d413a 100644 --- a/arch/i386/boot/Makefile +++ b/arch/i386/boot/Makefile @@ -25,8 +25,8 @@ SVGA_MODE := -DSVGA_MODE=NORMAL_VGA #RAMDISK := -DRAMDISK=512 -targets := vmlinux.bin bootsect bootsect.o setup setup.o \ - zImage bzImage +targets := vmlinux.bin bootsect bootsect.o \ + setup setup.o zImage bzImage subdir- := compressed hostprogs-y := tools/build diff --git a/arch/i386/boot/compressed/head.S b/arch/i386/boot/compressed/head.S index c5e80b69e7d4..b5893e4ecd37 100644 --- a/arch/i386/boot/compressed/head.S +++ b/arch/i386/boot/compressed/head.S @@ -25,6 +25,7 @@ #include <linux/linkage.h> #include <asm/segment.h> +#include <asm/page.h> .globl startup_32 @@ -74,7 +75,7 @@ startup_32: popl %esi # discard address popl %esi # real mode pointer xorl %ebx,%ebx - ljmp $(__BOOT_CS), $0x100000 + ljmp $(__BOOT_CS), $__PHYSICAL_START /* * We come here, if we were loaded high. @@ -99,7 +100,7 @@ startup_32: popl %ecx # lcount popl %edx # high_buffer_start popl %eax # hcount - movl $0x100000,%edi + movl $__PHYSICAL_START,%edi cli # make sure we don't get interrupted ljmp $(__BOOT_CS), $0x1000 # and jump to the move routine @@ -124,5 +125,5 @@ move_routine_start: movsl movl %ebx,%esi # Restore setup pointer xorl %ebx,%ebx - ljmp $(__BOOT_CS), $0x100000 + ljmp $(__BOOT_CS), $__PHYSICAL_START move_routine_end: diff --git a/arch/i386/boot/compressed/misc.c b/arch/i386/boot/compressed/misc.c index cedc55cc47de..82a807f9f5e6 100644 --- a/arch/i386/boot/compressed/misc.c +++ b/arch/i386/boot/compressed/misc.c @@ -13,6 +13,7 @@ #include <linux/vmalloc.h> #include <linux/tty.h> #include <asm/io.h> +#include <asm/page.h> /* * gzip declarations @@ -308,7 +309,7 @@ static void setup_normal_output_buffer(void) #else if ((RM_ALT_MEM_K > RM_EXT_MEM_K ? RM_ALT_MEM_K : RM_EXT_MEM_K) < 1024) error("Less than 2MB of memory"); #endif - output_data = (char *)0x100000; /* Points to 1M */ + output_data = (char *)__PHYSICAL_START; /* Normally Points to 1M */ free_mem_end_ptr = (long)real_mode; } @@ -333,8 +334,8 @@ static void setup_output_buffer_if_we_run_high(struct moveparams *mv) low_buffer_size = low_buffer_end - LOW_BUFFER_START; high_loaded = 1; free_mem_end_ptr = (long)high_buffer_start; - if ( (0x100000 + low_buffer_size) > ((ulg)high_buffer_start)) { - high_buffer_start = (uch *)(0x100000 + low_buffer_size); + if ( (__PHYSICAL_START + low_buffer_size) > ((ulg)high_buffer_start)) { + high_buffer_start = (uch *)(__PHYSICAL_START + low_buffer_size); mv->hcount = 0; /* say: we need not to move high_buffer */ } else mv->hcount = -1; @@ -353,7 +354,6 @@ static void close_output_buffer_if_we_run_high(struct moveparams *mv) } } - asmlinkage int decompress_kernel(struct moveparams *mv, void *rmode) { real_mode = rmode; diff --git a/arch/i386/boot/edd.S b/arch/i386/boot/edd.S index 027d6b354ffb..d8d69f2b911d 100644 --- a/arch/i386/boot/edd.S +++ b/arch/i386/boot/edd.S @@ -6,7 +6,7 @@ * projects 1572D, 1484D, 1386D, 1226DT * disk signature read by Matt Domsch <Matt_Domsch@dell.com> * and Andrew Wilks <Andrew_Wilks@dell.com> September 2003, June 2004 - * legacy CHS retreival by Patrick J. LoPresti <patl@users.sourceforge.net> + * legacy CHS retrieval by Patrick J. LoPresti <patl@users.sourceforge.net> * March 2004 * Command line option parsing, Matt Domsch, November 2004 */ diff --git a/arch/i386/boot/install.sh b/arch/i386/boot/install.sh index 90f2452b3b9e..f17b40dfc0f4 100644 --- a/arch/i386/boot/install.sh +++ b/arch/i386/boot/install.sh @@ -21,8 +21,8 @@ # User may have a custom install script -if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi -if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi +if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi +if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi # Default install - same as make zlilo diff --git a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S index caa1fde6904e..8cb420f40c58 100644 --- a/arch/i386/boot/setup.S +++ b/arch/i386/boot/setup.S @@ -33,7 +33,7 @@ * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999. * <stiker@northlink.com> * - * Fix to work around buggy BIOSes which dont use carry bit correctly + * Fix to work around buggy BIOSes which don't use carry bit correctly * and/or report extended memory in CX/DX for e801h memory size detection * call. As a result the kernel got wrong figures. The int15/e801h docs * from Ralf Brown interrupt list seem to indicate AX/BX should be used @@ -357,7 +357,7 @@ bail820: meme801: stc # fix to work around buggy - xorw %cx,%cx # BIOSes which dont clear/set + xorw %cx,%cx # BIOSes which don't clear/set xorw %dx,%dx # carry on pass/error of # e801h memory size call # or merely pass cx,dx though @@ -847,7 +847,7 @@ flush_instr: # # but we yet haven't reloaded the CS register, so the default size # of the target offset still is 16 bit. -# However, using an operand prefix (0x66), the CPU will properly +# However, using an operand prefix (0x66), the CPU will properly # take our 48 bit far pointer. (INTeL 80386 Programmer's Reference # Manual, Mixing 16-bit and 32-bit code, page 16-6) diff --git a/arch/i386/boot/tools/build.c b/arch/i386/boot/tools/build.c index 26509b826aed..6835f6d47c31 100644 --- a/arch/i386/boot/tools/build.c +++ b/arch/i386/boot/tools/build.c @@ -1,6 +1,4 @@ /* - * $Id: build.c,v 1.5 1997/05/19 12:29:58 mj Exp $ - * * Copyright (C) 1991, 1992 Linus Torvalds * Copyright (C) 1997 Martin Mares */ @@ -8,7 +6,8 @@ /* * This file builds a disk-image from three different files: * - * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest + * - bootsect: compatibility mbr which prints an error message if + * someone tries to boot the kernel directly. * - setup: 8086 machine code, sets up system parm * - system: 80386 code for actual system * @@ -71,7 +70,8 @@ void usage(void) int main(int argc, char ** argv) { - unsigned int i, c, sz, setup_sectors; + unsigned int i, sz, setup_sectors; + int c; u32 sys_size; byte major_root, minor_root; struct stat sb; diff --git a/arch/i386/crypto/aes.c b/arch/i386/crypto/aes.c index 1019430fc1f1..88ee85c3b43b 100644 --- a/arch/i386/crypto/aes.c +++ b/arch/i386/crypto/aes.c @@ -59,7 +59,7 @@ struct aes_ctx { }; #define WPOLY 0x011b -#define u32_in(x) le32_to_cpu(*(const u32 *)(x)) +#define u32_in(x) le32_to_cpup((const __le32 *)(x)) #define bytes2word(b0, b1, b2, b3) \ (((u32)(b3) << 24) | ((u32)(b2) << 16) | ((u32)(b1) << 8) | (b0)) diff --git a/arch/i386/defconfig b/arch/i386/defconfig index 28e620383799..ca07b95c06b8 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -126,7 +126,6 @@ CONFIG_HAVE_DEC_LOCK=y # CONFIG_PM=y CONFIG_SOFTWARE_SUSPEND=y -# CONFIG_PM_DISK is not set # # ACPI (Advanced Configuration and Power Interface) Support diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 51ecd512603d..4cc83b322b36 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_X86_MPPARSE) += mpparse.o obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o obj-$(CONFIG_X86_IO_APIC) += io_apic.o obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups.o +obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o obj-$(CONFIG_X86_NUMAQ) += numaq.o obj-$(CONFIG_X86_SUMMIT_NUMA) += summit.o obj-$(CONFIG_KPROBES) += kprobes.o diff --git a/arch/i386/kernel/acpi/Makefile b/arch/i386/kernel/acpi/Makefile index ee75cb286cfe..5e291a20c03d 100644 --- a/arch/i386/kernel/acpi/Makefile +++ b/arch/i386/kernel/acpi/Makefile @@ -2,3 +2,7 @@ obj-$(CONFIG_ACPI_BOOT) := boot.o obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o +ifneq ($(CONFIG_ACPI_PROCESSOR),) +obj-y += cstate.o +endif + diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 848bb97af7ca..b7808a89d945 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -29,6 +29,7 @@ #include <linux/efi.h> #include <linux/irq.h> #include <linux/module.h> +#include <linux/dmi.h> #include <asm/pgtable.h> #include <asm/io_apic.h> @@ -158,9 +159,15 @@ char *__acpi_map_table(unsigned long phys, unsigned long size) #endif #ifdef CONFIG_PCI_MMCONFIG -static int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) +/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ +struct acpi_table_mcfg_config *pci_mmcfg_config; +int pci_mmcfg_config_num; + +int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) { struct acpi_table_mcfg *mcfg; + unsigned long i; + int config_size; if (!phys_addr || !size) return -EINVAL; @@ -171,18 +178,38 @@ static int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) return -ENODEV; } - if (mcfg->base_reserved) { - printk(KERN_ERR PREFIX "MMCONFIG not in low 4GB of memory\n"); + /* how many config structures do we have */ + pci_mmcfg_config_num = 0; + i = size - sizeof(struct acpi_table_mcfg); + while (i >= sizeof(struct acpi_table_mcfg_config)) { + ++pci_mmcfg_config_num; + i -= sizeof(struct acpi_table_mcfg_config); + }; + if (pci_mmcfg_config_num == 0) { + printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); return -ENODEV; } - pci_mmcfg_base_addr = mcfg->base_address; + config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config); + pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL); + if (!pci_mmcfg_config) { + printk(KERN_WARNING PREFIX + "No memory for MCFG config tables\n"); + return -ENOMEM; + } + + memcpy(pci_mmcfg_config, &mcfg->config, config_size); + for (i = 0; i < pci_mmcfg_config_num; ++i) { + if (mcfg->config[i].base_reserved) { + printk(KERN_ERR PREFIX + "MMCONFIG not in low 4GB of memory\n"); + return -ENODEV; + } + } return 0; } -#else -#define acpi_parse_mcfg NULL -#endif /* !CONFIG_PCI_MMCONFIG */ +#endif /* CONFIG_PCI_MMCONFIG */ #ifdef CONFIG_X86_LOCAL_APIC static int __init @@ -506,6 +533,22 @@ acpi_unmap_lsapic(int cpu) EXPORT_SYMBOL(acpi_unmap_lsapic); #endif /* CONFIG_ACPI_HOTPLUG_CPU */ +int +acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) +{ + /* TBD */ + return -EINVAL; +} +EXPORT_SYMBOL(acpi_register_ioapic); + +int +acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) +{ + /* TBD */ + return -EINVAL; +} +EXPORT_SYMBOL(acpi_unregister_ioapic); + static unsigned long __init acpi_scan_rsdp ( unsigned long start, @@ -815,6 +858,219 @@ acpi_process_madt(void) return; } +extern int acpi_force; + +#ifdef __i386__ + +#ifdef CONFIG_ACPI_PCI +static int __init disable_acpi_irq(struct dmi_system_id *d) +{ + if (!acpi_force) { + printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n", + d->ident); + acpi_noirq_set(); + } + return 0; +} + +static int __init disable_acpi_pci(struct dmi_system_id *d) +{ + if (!acpi_force) { + printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n", + d->ident); + acpi_disable_pci(); + } + return 0; +} +#endif + +static int __init dmi_disable_acpi(struct dmi_system_id *d) +{ + if (!acpi_force) { + printk(KERN_NOTICE "%s detected: acpi off\n",d->ident); + disable_acpi(); + } else { + printk(KERN_NOTICE + "Warning: DMI blacklist says broken, but acpi forced\n"); + } + return 0; +} + +/* + * Limit ACPI to CPU enumeration for HT + */ +static int __init force_acpi_ht(struct dmi_system_id *d) +{ + if (!acpi_force) { + printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", d->ident); + disable_acpi(); + acpi_ht = 1; + } else { + printk(KERN_NOTICE + "Warning: acpi=force overrules DMI blacklist: acpi=ht\n"); + } + return 0; +} + +/* + * If your system is blacklisted here, but you find that acpi=force + * works for you, please contact acpi-devel@sourceforge.net + */ +static struct dmi_system_id __initdata acpi_dmi_table[] = { + /* + * Boxes that need ACPI disabled + */ + { + .callback = dmi_disable_acpi, + .ident = "IBM Thinkpad", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "2629H1G"), + }, + }, + + /* + * Boxes that need acpi=ht + */ + { + .callback = force_acpi_ht, + .ident = "FSC Primergy T850", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "DELL GX240", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "HP VISUALIZE NT Workstation", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "Compaq Workstation W8000", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), + DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "ASUS P4B266", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P4B266"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "ASUS P2B-DS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "ASUS CUR-DLS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "ABIT i440BX-W83977", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"), + DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "IBM Bladecenter", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "IBM eServer xSeries 360", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "IBM eserver xSeries 330", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "IBM eserver xSeries 440", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), + }, + }, + +#ifdef CONFIG_ACPI_PCI + /* + * Boxes that need ACPI PCI IRQ routing disabled + */ + { + .callback = disable_acpi_irq, + .ident = "ASUS A7V", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"), + DMI_MATCH(DMI_BOARD_NAME, "<A7V>"), + /* newer BIOS, Revision 1011, does work */ + DMI_MATCH(DMI_BIOS_VERSION, "ASUS A7V ACPI BIOS Revision 1007"), + }, + }, + + /* + * Boxes that need ACPI PCI IRQ routing and PCI scan disabled + */ + { /* _BBN 0 bug */ + .callback = disable_acpi_pci, + .ident = "ASUS PR-DLS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"), + DMI_MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"), + DMI_MATCH(DMI_BIOS_DATE, "03/21/2003") + }, + }, + { + .callback = disable_acpi_pci, + .ident = "Acer TravelMate 36x Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), + }, + }, +#endif + { } +}; + +#endif /* __i386__ */ + /* * acpi_boot_table_init() and acpi_boot_init() * called from setup_arch(), always. @@ -843,6 +1099,10 @@ acpi_boot_table_init(void) { int error; +#ifdef __i386__ + dmi_check_system(acpi_dmi_table); +#endif + /* * If acpi_disabled, bail out * One exception: acpi=ht continues far enough to enumerate LAPICs @@ -870,8 +1130,6 @@ acpi_boot_table_init(void) */ error = acpi_blacklisted(); if (error) { - extern int acpi_force; - if (acpi_force) { printk(KERN_WARNING PREFIX "acpi=force override\n"); } else { @@ -907,7 +1165,6 @@ int __init acpi_boot_init(void) acpi_process_madt(); acpi_table_parse(ACPI_HPET, acpi_parse_hpet); - acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg); return 0; } diff --git a/arch/i386/kernel/acpi/cstate.c b/arch/i386/kernel/acpi/cstate.c new file mode 100644 index 000000000000..4c3036ba65df --- /dev/null +++ b/arch/i386/kernel/acpi/cstate.c @@ -0,0 +1,103 @@ +/* + * arch/i386/kernel/acpi/cstate.c + * + * Copyright (C) 2005 Intel Corporation + * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> + * - Added _PDC for SMP C-states on Intel CPUs + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/acpi.h> + +#include <acpi/processor.h> +#include <asm/acpi.h> + +static void acpi_processor_power_init_intel_pdc(struct acpi_processor_power + *pow) +{ + struct acpi_object_list *obj_list; + union acpi_object *obj; + u32 *buf; + + /* allocate and initialize pdc. It will be used later. */ + obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL); + if (!obj_list) { + printk(KERN_ERR "Memory allocation error\n"); + return; + } + + obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL); + if (!obj) { + printk(KERN_ERR "Memory allocation error\n"); + kfree(obj_list); + return; + } + + buf = kmalloc(12, GFP_KERNEL); + if (!buf) { + printk(KERN_ERR "Memory allocation error\n"); + kfree(obj); + kfree(obj_list); + return; + } + + buf[0] = ACPI_PDC_REVISION_ID; + buf[1] = 1; + buf[2] = ACPI_PDC_C_CAPABILITY_SMP; + + obj->type = ACPI_TYPE_BUFFER; + obj->buffer.length = 12; + obj->buffer.pointer = (u8 *) buf; + obj_list->count = 1; + obj_list->pointer = obj; + pow->pdc = obj_list; + + return; +} + +/* Initialize _PDC data based on the CPU vendor */ +void acpi_processor_power_init_pdc(struct acpi_processor_power *pow, + unsigned int cpu) +{ + struct cpuinfo_x86 *c = cpu_data + cpu; + + pow->pdc = NULL; + if (c->x86_vendor == X86_VENDOR_INTEL) + acpi_processor_power_init_intel_pdc(pow); + + return; +} + +EXPORT_SYMBOL(acpi_processor_power_init_pdc); + +/* + * Initialize bm_flags based on the CPU cache properties + * On SMP it depends on cache configuration + * - When cache is not shared among all CPUs, we flush cache + * before entering C3. + * - When cache is shared among all CPUs, we use bm_check + * mechanism as in UP case + * + * This routine is called only after all the CPUs are online + */ +void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags, + unsigned int cpu) +{ + struct cpuinfo_x86 *c = cpu_data + cpu; + + flags->bm_check = 0; + if (num_online_cpus() == 1) + flags->bm_check = 1; + else if (c->x86_vendor == X86_VENDOR_INTEL) { + /* + * Today all CPUs that support C3 share cache. + * TBD: This needs to look at cache shared map, once + * multi-core detection patch makes to the base. + */ + flags->bm_check = 1; + } +} + +EXPORT_SYMBOL(acpi_processor_power_init_bm_check); diff --git a/arch/i386/kernel/acpi/sleep.c b/arch/i386/kernel/acpi/sleep.c index 28bb0514bb6e..c1af93032ff3 100644 --- a/arch/i386/kernel/acpi/sleep.c +++ b/arch/i386/kernel/acpi/sleep.c @@ -7,6 +7,7 @@ #include <linux/acpi.h> #include <linux/bootmem.h> +#include <linux/dmi.h> #include <asm/smp.h> #include <asm/tlbflush.h> @@ -91,3 +92,29 @@ static int __init acpi_sleep_setup(char *str) __setup("acpi_sleep=", acpi_sleep_setup); + + +static __init int reset_videomode_after_s3(struct dmi_system_id *d) +{ + acpi_video_flags |= 2; + return 0; +} + +static __initdata struct dmi_system_id acpisleep_dmi_table[] = { + { /* Reset video mode after returning from ACPI S3 sleep */ + .callback = reset_videomode_after_s3, + .ident = "Toshiba Satellite 4030cdt", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"), + }, + }, + { } +}; + +static int __init acpisleep_dmi_init(void) +{ + dmi_check_system(acpisleep_dmi_table); + return 0; +} + +core_initcall(acpisleep_dmi_init); diff --git a/arch/i386/kernel/acpi/wakeup.S b/arch/i386/kernel/acpi/wakeup.S index 39d32484f6f5..44d886c745ec 100644 --- a/arch/i386/kernel/acpi/wakeup.S +++ b/arch/i386/kernel/acpi/wakeup.S @@ -74,8 +74,9 @@ wakeup_code: movw %ax,%fs movw $0x0e00 + 'i', %fs:(0x12) - # need a gdt - lgdt real_save_gdt - wakeup_code + # need a gdt -- use lgdtl to force 32-bit operands, in case + # the GDT is located past 16 megabytes. + lgdtl real_save_gdt - wakeup_code movl real_save_cr0 - wakeup_code, %eax movl %eax, %cr0 diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index d509836b70c3..bd1dbf3bd223 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -26,6 +26,7 @@ #include <linux/mc146818rtc.h> #include <linux/kernel_stat.h> #include <linux/sysdev.h> +#include <linux/cpu.h> #include <asm/atomic.h> #include <asm/smp.h> @@ -34,12 +35,18 @@ #include <asm/desc.h> #include <asm/arch_hooks.h> #include <asm/hpet.h> +#include <asm/i8253.h> #include <mach_apic.h> #include "io_ports.h" /* + * Knob to control our willingness to enable the local APIC. + */ +int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */ + +/* * Debug level */ int apic_verbosity; @@ -205,7 +212,7 @@ void __init connect_bsp_APIC(void) enable_apic_mode(); } -void disconnect_bsp_APIC(void) +void disconnect_bsp_APIC(int virt_wire_setup) { if (pic_mode) { /* @@ -219,6 +226,42 @@ void disconnect_bsp_APIC(void) outb(0x70, 0x22); outb(0x00, 0x23); } + else { + /* Go back to Virtual Wire compatibility mode */ + unsigned long value; + + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write_around(APIC_SPIV, value); + + if (!virt_wire_setup) { + /* For LVT0 make it edge triggered, active high, external and enabled */ + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write_around(APIC_LVT0, value); + } + else { + /* Disable LVT0 */ + apic_write_around(APIC_LVT0, APIC_LVT_MASKED); + } + + /* For LVT1 make it edge triggered, active high, nmi and enabled */ + value = apic_read(APIC_LVT1); + value &= ~( + APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write_around(APIC_LVT1, value); + } } void disable_local_APIC(void) @@ -363,7 +406,7 @@ void __init init_bsp_APIC(void) apic_write_around(APIC_LVT1, value); } -void __init setup_local_APIC (void) +void __devinit setup_local_APIC(void) { unsigned long oldvalue, value, ver, maxlvt; @@ -634,7 +677,7 @@ static struct sys_device device_lapic = { .cls = &lapic_sysclass, }; -static void __init apic_pm_activate(void) +static void __devinit apic_pm_activate(void) { apic_pm_state.active = 1; } @@ -665,26 +708,6 @@ static void apic_pm_activate(void) { } * Original code written by Keir Fraser. */ -/* - * Knob to control our willingness to enable the local APIC. - */ -int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */ - -static int __init lapic_disable(char *str) -{ - enable_local_apic = -1; - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); - return 0; -} -__setup("nolapic", lapic_disable); - -static int __init lapic_enable(char *str) -{ - enable_local_apic = 1; - return 0; -} -__setup("lapic", lapic_enable); - static int __init apic_set_verbosity(char *str) { if (strcmp("debug", str) == 0) @@ -855,9 +878,8 @@ fake_ioapic_page: * but we do not accept timer interrupts yet. We only allow the BP * to calibrate. */ -static unsigned int __init get_8254_timer_count(void) +static unsigned int __devinit get_8254_timer_count(void) { - extern spinlock_t i8253_lock; unsigned long flags; unsigned int count; @@ -874,7 +896,7 @@ static unsigned int __init get_8254_timer_count(void) } /* next tick in 8254 can be caught by catching timer wraparound */ -static void __init wait_8254_wraparound(void) +static void __devinit wait_8254_wraparound(void) { unsigned int curr_count, prev_count; @@ -894,7 +916,7 @@ static void __init wait_8254_wraparound(void) * Default initialization for 8254 timers. If we use other timers like HPET, * we override this later */ -void (*wait_timer_tick)(void) __initdata = wait_8254_wraparound; +void (*wait_timer_tick)(void) __devinitdata = wait_8254_wraparound; /* * This function sets up the local APIC timer, with a timeout of @@ -930,7 +952,7 @@ static void __setup_APIC_LVTT(unsigned int clocks) apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); } -static void __init setup_APIC_timer(unsigned int clocks) +static void __devinit setup_APIC_timer(unsigned int clocks) { unsigned long flags; @@ -1043,12 +1065,12 @@ void __init setup_boot_APIC_clock(void) local_irq_enable(); } -void __init setup_secondary_APIC_clock(void) +void __devinit setup_secondary_APIC_clock(void) { setup_APIC_timer(calibration_result); } -void __init disable_APIC_timer(void) +void __devinit disable_APIC_timer(void) { if (using_apic_timer) { unsigned long v; @@ -1133,7 +1155,7 @@ inline void smp_local_timer_interrupt(struct pt_regs * regs) } #ifdef CONFIG_SMP - update_process_times(user_mode(regs)); + update_process_times(user_mode_vm(regs)); #endif } diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index 0ff65abcd56c..d7811c4e8b50 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -228,10 +228,10 @@ #include <asm/system.h> #include <asm/uaccess.h> #include <asm/desc.h> +#include <asm/i8253.h> #include "io_ports.h" -extern spinlock_t i8253_lock; extern unsigned long get_cmos_time(void); extern void machine_real_restart(unsigned char *, int); @@ -346,10 +346,10 @@ extern int (*console_blank_hook)(int); struct apm_user { int magic; struct apm_user * next; - int suser: 1; - int writer: 1; - int reader: 1; - int suspend_wait: 1; + unsigned int suser: 1; + unsigned int writer: 1; + unsigned int reader: 1; + unsigned int suspend_wait: 1; int suspend_result; int suspends_pending; int standbys_pending; @@ -911,14 +911,7 @@ static void apm_power_off(void) 0xcd, 0x15 /* int $0x15 */ }; - /* - * This may be called on an SMP machine. - */ -#ifdef CONFIG_SMP /* Some bioses don't like being called from CPU != 0 */ - set_cpus_allowed(current, cpumask_of_cpu(0)); - BUG_ON(smp_processor_id() != 0); -#endif if (apm_info.realmode_power_off) { (void)apm_save_cpus(); @@ -1168,8 +1161,7 @@ static void get_time_diff(void) static void reinit_timer(void) { #ifdef INIT_TIMER_AFTER_SUSPEND - unsigned long flags; - extern spinlock_t i8253_lock; + unsigned long flags; spin_lock_irqsave(&i8253_lock, flags); /* set the clock to 100 Hz */ diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index d199e525680a..4553ffd94b1f 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -24,9 +24,9 @@ EXPORT_PER_CPU_SYMBOL(cpu_gdt_table); DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]); EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack); -static int cachesize_override __initdata = -1; -static int disable_x86_fxsr __initdata = 0; -static int disable_x86_serial_nr __initdata = 1; +static int cachesize_override __devinitdata = -1; +static int disable_x86_fxsr __devinitdata = 0; +static int disable_x86_serial_nr __devinitdata = 1; struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {}; @@ -59,7 +59,7 @@ static int __init cachesize_setup(char *str) } __setup("cachesize=", cachesize_setup); -int __init get_model_name(struct cpuinfo_x86 *c) +int __devinit get_model_name(struct cpuinfo_x86 *c) { unsigned int *v; char *p, *q; @@ -89,7 +89,7 @@ int __init get_model_name(struct cpuinfo_x86 *c) } -void __init display_cacheinfo(struct cpuinfo_x86 *c) +void __devinit display_cacheinfo(struct cpuinfo_x86 *c) { unsigned int n, dummy, ecx, edx, l2size; @@ -130,7 +130,7 @@ void __init display_cacheinfo(struct cpuinfo_x86 *c) /* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used */ /* Look up CPU names by table lookup. */ -static char __init *table_lookup_model(struct cpuinfo_x86 *c) +static char __devinit *table_lookup_model(struct cpuinfo_x86 *c) { struct cpu_model_info *info; @@ -151,7 +151,7 @@ static char __init *table_lookup_model(struct cpuinfo_x86 *c) } -void __init get_cpu_vendor(struct cpuinfo_x86 *c, int early) +void __devinit get_cpu_vendor(struct cpuinfo_x86 *c, int early) { char *v = c->x86_vendor_id; int i; @@ -202,7 +202,7 @@ static inline int flag_is_changeable_p(u32 flag) /* Probe for the CPUID instruction */ -static int __init have_cpuid_p(void) +static int __devinit have_cpuid_p(void) { return flag_is_changeable_p(X86_EFLAGS_ID); } @@ -249,7 +249,7 @@ static void __init early_cpu_detect(void) #endif } -void __init generic_identify(struct cpuinfo_x86 * c) +void __devinit generic_identify(struct cpuinfo_x86 * c) { u32 tfms, xlvl; int junk; @@ -296,7 +296,7 @@ void __init generic_identify(struct cpuinfo_x86 * c) } } -static void __init squash_the_stupid_serial_number(struct cpuinfo_x86 *c) +static void __devinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) { if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr ) { /* Disable processor serial number */ @@ -324,7 +324,7 @@ __setup("serialnumber", x86_serial_nr_setup); /* * This does the hard work of actually picking apart the CPU stuff... */ -void __init identify_cpu(struct cpuinfo_x86 *c) +void __devinit identify_cpu(struct cpuinfo_x86 *c) { int i; @@ -432,10 +432,18 @@ void __init identify_cpu(struct cpuinfo_x86 *c) #ifdef CONFIG_X86_MCE mcheck_init(c); #endif + if (c == &boot_cpu_data) + sysenter_setup(); + enable_sep_cpu(); + + if (c == &boot_cpu_data) + mtrr_bp_init(); + else + mtrr_ap_init(); } #ifdef CONFIG_X86_HT -void __init detect_ht(struct cpuinfo_x86 *c) +void __devinit detect_ht(struct cpuinfo_x86 *c) { u32 eax, ebx, ecx, edx; int index_msb, tmp; @@ -490,7 +498,7 @@ void __init detect_ht(struct cpuinfo_x86 *c) } #endif -void __init print_cpu_info(struct cpuinfo_x86 *c) +void __devinit print_cpu_info(struct cpuinfo_x86 *c) { char *vendor = NULL; @@ -513,7 +521,7 @@ void __init print_cpu_info(struct cpuinfo_x86 *c) printk("\n"); } -cpumask_t cpu_initialized __initdata = CPU_MASK_NONE; +cpumask_t cpu_initialized __devinitdata = CPU_MASK_NONE; /* This is hacky. :) * We're emulating future behavior. @@ -560,7 +568,7 @@ void __init early_cpu_init(void) * and IDT. We reload them nevertheless, this function acts as a * 'CPU state barrier', nothing should get across. */ -void __init cpu_init (void) +void __devinit cpu_init(void) { int cpu = smp_processor_id(); struct tss_struct * t = &per_cpu(init_tss, cpu); @@ -635,7 +643,7 @@ void __init cpu_init (void) /* Clear all 6 debug registers: */ -#define CD(register) __asm__("movl %0,%%db" #register ::"r"(0) ); +#define CD(register) set_debugreg(0, register) CD(0); CD(1); CD(2); CD(3); /* no db4 and db5 */; CD(6); CD(7); @@ -648,3 +656,15 @@ void __init cpu_init (void) clear_used_math(); mxcsr_feature_mask_init(); } + +#ifdef CONFIG_HOTPLUG_CPU +void __devinit cpu_uninit(void) +{ + int cpu = raw_smp_processor_id(); + cpu_clear(cpu, cpu_initialized); + + /* lazy TLB state */ + per_cpu(cpu_tlbstate, cpu).state = 0; + per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm; +} +#endif diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index 963e17aa205d..60a9e54dd20e 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -442,6 +442,13 @@ acpi_cpufreq_cpu_init ( (u32) data->acpi_data.states[i].transition_latency); cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu); + + /* + * the first call to ->target() should result in us actually + * writing something to the appropriate registers. + */ + data->resume = 1; + return (result); err_freqfree: diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c index 1a49adb1f4a6..e86ea486c311 100644 --- a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c +++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c @@ -190,7 +190,7 @@ static __init struct pci_dev *gx_detect_chipset(void) /* detect which companion chip is used */ while ((gx_pci = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, gx_pci)) != NULL) { - if ((pci_match_device (gx_chipset_tbl, gx_pci)) != NULL) { + if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) { return gx_pci; } } diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c index 5c530064eb74..73a5dc5b26b8 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c @@ -648,9 +648,7 @@ static int powernow_cpu_exit (struct cpufreq_policy *policy) { } #endif - if (powernow_table) - kfree(powernow_table); - + kfree(powernow_table); return 0; } diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index 10cc096c0ade..ab6e0611303d 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -1,5 +1,5 @@ /* - * (c) 2003, 2004 Advanced Micro Devices, Inc. + * (c) 2003, 2004, 2005 Advanced Micro Devices, Inc. * Your use of this code is subject to the terms and conditions of the * GNU general public license version 2. See "COPYING" or * http://www.gnu.org/licenses/gpl.html @@ -44,7 +44,7 @@ #define PFX "powernow-k8: " #define BFX PFX "BIOS error: " -#define VERSION "version 1.40.2" +#define VERSION "version 1.50.3" #include "powernow-k8.h" /* serialize freq changes */ @@ -110,14 +110,13 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data) u32 lo, hi; u32 i = 0; - lo = MSR_S_LO_CHANGE_PENDING; - while (lo & MSR_S_LO_CHANGE_PENDING) { + do { if (i++ > 0x1000000) { printk(KERN_ERR PFX "detected change pending stuck\n"); return 1; } rdmsr(MSR_FIDVID_STATUS, lo, hi); - } + } while (lo & MSR_S_LO_CHANGE_PENDING); data->currvid = hi & MSR_S_HI_CURRENT_VID; data->currfid = lo & MSR_S_LO_CURRENT_FID; @@ -232,7 +231,7 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid) /* * Reduce the vid by the max of step or reqvid. * Decreasing vid codes represent increasing voltages: - * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of 0x1f is off. + * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off. */ static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step) { @@ -467,7 +466,7 @@ static int check_supported_cpu(unsigned int cpu) eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || ((eax & CPUID_XFAM) != CPUID_XFAM_K8) || - ((eax & CPUID_XMOD) > CPUID_XMOD_REV_E)) { + ((eax & CPUID_XMOD) > CPUID_XMOD_REV_F)) { printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax); goto out; } @@ -696,6 +695,7 @@ static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK; data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK; + data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK; data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK); data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK; @@ -735,8 +735,16 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) } for (i = 0; i < data->acpi_data.state_count; i++) { - u32 fid = data->acpi_data.states[i].control & FID_MASK; - u32 vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK; + u32 fid; + u32 vid; + + if (data->exttype) { + fid = data->acpi_data.states[i].status & FID_MASK; + vid = (data->acpi_data.states[i].status >> VID_SHIFT) & VID_MASK; + } else { + fid = data->acpi_data.states[i].control & FID_MASK; + vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK; + } dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); @@ -753,7 +761,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) } /* verify voltage is OK - BIOSs are using "off" to indicate invalid */ - if (vid == 0x1f) { + if (vid == VID_OFF) { dprintk("invalid vid %u, ignoring\n", vid); powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; continue; @@ -930,15 +938,6 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi down(&fidvid_sem); - for_each_cpu_mask(i, cpu_core_map[pol->cpu]) { - /* make sure the sibling is initialized */ - if (!powernow_data[i]) { - ret = 0; - up(&fidvid_sem); - goto err_out; - } - } - powernow_k8_acpi_pst_values(data, newstate); if (transition_frequency(data, newstate)) { @@ -978,7 +977,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) { struct powernow_k8_data *data; cpumask_t oldmask = CPU_MASK_ALL; - int rc; + int rc, i; if (!check_supported_cpu(pol->cpu)) return -ENODEV; @@ -1064,7 +1063,9 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) printk("cpu_init done, current fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); - powernow_data[pol->cpu] = data; + for_each_cpu_mask(i, cpu_core_map[pol->cpu]) { + powernow_data[i] = data; + } return 0; diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h index 9ed5bf221cb7..b1e85bb36396 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h @@ -1,5 +1,5 @@ /* - * (c) 2003, 2004 Advanced Micro Devices, Inc. + * (c) 2003, 2004, 2005 Advanced Micro Devices, Inc. * Your use of this code is subject to the terms and conditions of the * GNU general public license version 2. See "COPYING" or * http://www.gnu.org/licenses/gpl.html @@ -19,6 +19,7 @@ struct powernow_k8_data { u32 vidmvs; /* usable value calculated from mvs */ u32 vstable; /* voltage stabilization time, units 20 us */ u32 plllock; /* pll lock time, units 1 us */ + u32 exttype; /* extended interface = 1 */ /* keep track of the current fid / vid */ u32 currvid, currfid; @@ -41,7 +42,7 @@ struct powernow_k8_data { #define CPUID_XFAM 0x0ff00000 /* extended family */ #define CPUID_XFAM_K8 0 #define CPUID_XMOD 0x000f0000 /* extended model */ -#define CPUID_XMOD_REV_E 0x00020000 +#define CPUID_XMOD_REV_F 0x00040000 #define CPUID_USE_XFAM_XMOD 0x00000f00 #define CPUID_GET_MAX_CAPABILITIES 0x80000000 #define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007 @@ -57,25 +58,26 @@ struct powernow_k8_data { /* Field definitions within the FID VID Low Control MSR : */ #define MSR_C_LO_INIT_FID_VID 0x00010000 -#define MSR_C_LO_NEW_VID 0x00001f00 -#define MSR_C_LO_NEW_FID 0x0000002f +#define MSR_C_LO_NEW_VID 0x00003f00 +#define MSR_C_LO_NEW_FID 0x0000003f #define MSR_C_LO_VID_SHIFT 8 /* Field definitions within the FID VID High Control MSR : */ -#define MSR_C_HI_STP_GNT_TO 0x000fffff +#define MSR_C_HI_STP_GNT_TO 0x000fffff /* Field definitions within the FID VID Low Status MSR : */ -#define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */ -#define MSR_S_LO_MAX_RAMP_VID 0x1f000000 +#define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */ +#define MSR_S_LO_MAX_RAMP_VID 0x3f000000 #define MSR_S_LO_MAX_FID 0x003f0000 #define MSR_S_LO_START_FID 0x00003f00 #define MSR_S_LO_CURRENT_FID 0x0000003f /* Field definitions within the FID VID High Status MSR : */ -#define MSR_S_HI_MAX_WORKING_VID 0x001f0000 -#define MSR_S_HI_START_VID 0x00001f00 -#define MSR_S_HI_CURRENT_VID 0x0000001f -#define MSR_C_HI_STP_GNT_BENIGN 0x00000001 +#define MSR_S_HI_MIN_WORKING_VID 0x3f000000 +#define MSR_S_HI_MAX_WORKING_VID 0x003f0000 +#define MSR_S_HI_START_VID 0x00003f00 +#define MSR_S_HI_CURRENT_VID 0x0000003f +#define MSR_C_HI_STP_GNT_BENIGN 0x00000001 /* * There are restrictions frequencies have to follow: @@ -99,13 +101,15 @@ struct powernow_k8_data { #define MIN_FREQ_RESOLUTION 200 /* fids jump by 2 matching freq jumps by 200 */ #define MAX_FID 0x2a /* Spec only gives FID values as far as 5 GHz */ -#define LEAST_VID 0x1e /* Lowest (numerically highest) useful vid value */ +#define LEAST_VID 0x3e /* Lowest (numerically highest) useful vid value */ #define MIN_FREQ 800 /* Min and max freqs, per spec */ #define MAX_FREQ 5000 #define INVALID_FID_MASK 0xffffffc1 /* not a valid fid if these bits are set */ -#define INVALID_VID_MASK 0xffffffe0 /* not a valid vid if these bits are set */ +#define INVALID_VID_MASK 0xffffffc0 /* not a valid vid if these bits are set */ + +#define VID_OFF 0x3f #define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */ @@ -121,12 +125,14 @@ struct powernow_k8_data { #define IRT_SHIFT 30 #define RVO_SHIFT 28 +#define EXT_TYPE_SHIFT 27 #define PLL_L_SHIFT 20 #define MVS_SHIFT 18 #define VST_SHIFT 11 #define VID_SHIFT 6 #define IRT_MASK 3 #define RVO_MASK 3 +#define EXT_TYPE_MASK 1 #define PLL_L_MASK 0x7f #define MVS_MASK 3 #define VST_MASK 0x7f diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 7dcbf70fc16f..327a55d4d1c6 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -375,7 +375,7 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) arg0.buffer.pointer = (u8 *) arg0_buf; arg0_buf[0] = ACPI_PDC_REVISION_ID; arg0_buf[1] = 1; - arg0_buf[2] = ACPI_PDC_EST_CAPABILITY_SMP | ACPI_PDC_EST_CAPABILITY_MSR; + arg0_buf[2] = ACPI_PDC_EST_CAPABILITY_SMP_MSR; p.pdc = &arg_list; diff --git a/arch/i386/kernel/cpu/intel.c b/arch/i386/kernel/cpu/intel.c index 121aa2176e69..a2c33c1a46c5 100644 --- a/arch/i386/kernel/cpu/intel.c +++ b/arch/i386/kernel/cpu/intel.c @@ -25,10 +25,10 @@ extern int trap_init_f00f_bug(void); /* * Alignment at which movsl is preferred for bulk memory copies. */ -struct movsl_mask movsl_mask; +struct movsl_mask movsl_mask __read_mostly; #endif -void __init early_intel_workaround(struct cpuinfo_x86 *c) +void __devinit early_intel_workaround(struct cpuinfo_x86 *c) { if (c->x86_vendor != X86_VENDOR_INTEL) return; @@ -43,7 +43,7 @@ void __init early_intel_workaround(struct cpuinfo_x86 *c) * This is called before we do cpu ident work */ -int __init ppro_with_ram_bug(void) +int __devinit ppro_with_ram_bug(void) { /* Uses data from early_cpu_detect now */ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && @@ -61,7 +61,7 @@ int __init ppro_with_ram_bug(void) * P4 Xeon errata 037 workaround. * Hardware prefetcher may cause stale data to be loaded into the cache. */ -static void __init Intel_errata_workarounds(struct cpuinfo_x86 *c) +static void __devinit Intel_errata_workarounds(struct cpuinfo_x86 *c) { unsigned long lo, hi; @@ -80,7 +80,7 @@ static void __init Intel_errata_workarounds(struct cpuinfo_x86 *c) /* * find out the number of processor cores on the die */ -static int __init num_cpu_cores(struct cpuinfo_x86 *c) +static int __devinit num_cpu_cores(struct cpuinfo_x86 *c) { unsigned int eax; @@ -98,7 +98,7 @@ static int __init num_cpu_cores(struct cpuinfo_x86 *c) return 1; } -static void __init init_intel(struct cpuinfo_x86 *c) +static void __devinit init_intel(struct cpuinfo_x86 *c) { unsigned int l2 = 0; char *p = NULL; @@ -204,7 +204,7 @@ static unsigned int intel_size_cache(struct cpuinfo_x86 * c, unsigned int size) return size; } -static struct cpu_dev intel_cpu_dev __initdata = { +static struct cpu_dev intel_cpu_dev __devinitdata = { .c_vendor = "Intel", .c_ident = { "GenuineIntel" }, .c_models = { diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index a710dc4eb20e..6c55b50cf048 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -28,7 +28,7 @@ struct _cache_table }; /* all the cache descriptor types we care about (no TLB or trace cache entries) */ -static struct _cache_table cache_table[] __initdata = +static struct _cache_table cache_table[] __devinitdata = { { 0x06, LVL_1_INST, 8 }, /* 4-way set assoc, 32 byte line size */ { 0x08, LVL_1_INST, 16 }, /* 4-way set assoc, 32 byte line size */ @@ -128,7 +128,7 @@ static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_le cpuid_count(4, index, &eax, &ebx, &ecx, &edx); cache_eax.full = eax; if (cache_eax.split.type == CACHE_TYPE_NULL) - return -1; + return -EIO; /* better error ? */ this_leaf->eax.full = eax; this_leaf->ebx.full = ebx; @@ -160,7 +160,7 @@ static int __init find_num_cache_leaves(void) return retval; } -unsigned int __init init_intel_cacheinfo(struct cpuinfo_x86 *c) +unsigned int __devinit init_intel_cacheinfo(struct cpuinfo_x86 *c) { unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */ unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */ @@ -334,6 +334,7 @@ static int __devinit detect_cache_attributes(unsigned int cpu) struct _cpuid4_info *this_leaf; unsigned long j; int retval; + cpumask_t oldmask; if (num_cache_leaves == 0) return -ENOENT; @@ -345,19 +346,26 @@ static int __devinit detect_cache_attributes(unsigned int cpu) memset(cpuid4_info[cpu], 0, sizeof(struct _cpuid4_info) * num_cache_leaves); + oldmask = current->cpus_allowed; + retval = set_cpus_allowed(current, cpumask_of_cpu(cpu)); + if (retval) + goto out; + /* Do cpuid and store the results */ + retval = 0; for (j = 0; j < num_cache_leaves; j++) { this_leaf = CPUID4_INFO_IDX(cpu, j); retval = cpuid4_cache_lookup(j, this_leaf); if (unlikely(retval < 0)) - goto err_out; + break; cache_shared_cpu_map_setup(cpu, j); } - return 0; + set_cpus_allowed(current, oldmask); -err_out: - free_cache_attributes(cpu); - return -ENOMEM; +out: + if (retval) + free_cache_attributes(cpu); + return retval; } #ifdef CONFIG_SYSFS diff --git a/arch/i386/kernel/cpu/mcheck/k7.c b/arch/i386/kernel/cpu/mcheck/k7.c index 8df52e86c4d2..c4abe7657397 100644 --- a/arch/i386/kernel/cpu/mcheck/k7.c +++ b/arch/i386/kernel/cpu/mcheck/k7.c @@ -69,7 +69,7 @@ static fastcall void k7_machine_check(struct pt_regs * regs, long error_code) /* AMD K7 machine check is Intel like */ -void __init amd_mcheck_init(struct cpuinfo_x86 *c) +void __devinit amd_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/i386/kernel/cpu/mcheck/mce.c index bf6d1aefafc0..2cf25d2ba0f1 100644 --- a/arch/i386/kernel/cpu/mcheck/mce.c +++ b/arch/i386/kernel/cpu/mcheck/mce.c @@ -16,7 +16,7 @@ #include "mce.h" -int mce_disabled __initdata = 0; +int mce_disabled __devinitdata = 0; int nr_mce_banks; EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */ @@ -31,7 +31,7 @@ static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_ void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check; /* This has to be run for each processor */ -void __init mcheck_init(struct cpuinfo_x86 *c) +void __devinit mcheck_init(struct cpuinfo_x86 *c) { if (mce_disabled==1) return; diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c index 8b16ceb929b4..0abccb6fdf9e 100644 --- a/arch/i386/kernel/cpu/mcheck/p4.c +++ b/arch/i386/kernel/cpu/mcheck/p4.c @@ -78,7 +78,7 @@ fastcall void smp_thermal_interrupt(struct pt_regs *regs) } /* P4/Xeon Thermal regulation detect and init */ -static void __init intel_init_thermal(struct cpuinfo_x86 *c) +static void __devinit intel_init_thermal(struct cpuinfo_x86 *c) { u32 l, h; unsigned int cpu = smp_processor_id(); @@ -232,7 +232,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code) } -void __init intel_p4_mcheck_init(struct cpuinfo_x86 *c) +void __devinit intel_p4_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; diff --git a/arch/i386/kernel/cpu/mcheck/p5.c b/arch/i386/kernel/cpu/mcheck/p5.c index c45a1b485c80..ec0614cd2925 100644 --- a/arch/i386/kernel/cpu/mcheck/p5.c +++ b/arch/i386/kernel/cpu/mcheck/p5.c @@ -29,7 +29,7 @@ static fastcall void pentium_machine_check(struct pt_regs * regs, long error_cod } /* Set up machine check reporting for processors with Intel style MCE */ -void __init intel_p5_mcheck_init(struct cpuinfo_x86 *c) +void __devinit intel_p5_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; diff --git a/arch/i386/kernel/cpu/mcheck/p6.c b/arch/i386/kernel/cpu/mcheck/p6.c index 46640f8c2494..f01b73f947e1 100644 --- a/arch/i386/kernel/cpu/mcheck/p6.c +++ b/arch/i386/kernel/cpu/mcheck/p6.c @@ -80,7 +80,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code) } /* Set up machine check reporting for processors with Intel style MCE */ -void __init intel_p6_mcheck_init(struct cpuinfo_x86 *c) +void __devinit intel_p6_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; diff --git a/arch/i386/kernel/cpu/mcheck/winchip.c b/arch/i386/kernel/cpu/mcheck/winchip.c index 753fa7acb984..7bae68fa168f 100644 --- a/arch/i386/kernel/cpu/mcheck/winchip.c +++ b/arch/i386/kernel/cpu/mcheck/winchip.c @@ -23,7 +23,7 @@ static fastcall void winchip_machine_check(struct pt_regs * regs, long error_cod } /* Set up machine check reporting on the Winchip C6 series */ -void __init winchip_mcheck_init(struct cpuinfo_x86 *c) +void __devinit winchip_mcheck_init(struct cpuinfo_x86 *c) { u32 lo, hi; machine_check_vector = winchip_machine_check; diff --git a/arch/i386/kernel/cpu/mtrr/generic.c b/arch/i386/kernel/cpu/mtrr/generic.c index f468a979e9aa..169ac8e0db68 100644 --- a/arch/i386/kernel/cpu/mtrr/generic.c +++ b/arch/i386/kernel/cpu/mtrr/generic.c @@ -67,14 +67,6 @@ void __init get_mtrr_state(void) mtrr_state.enabled = (lo & 0xc00) >> 10; } -/* Free resources associated with a struct mtrr_state */ -void __init finalize_mtrr_state(void) -{ - if (mtrr_state.var_ranges) - kfree(mtrr_state.var_ranges); - mtrr_state.var_ranges = NULL; -} - /* Some BIOS's are fucked and don't set all MTRRs the same! */ void __init mtrr_state_warn(void) { @@ -335,6 +327,9 @@ static void generic_set_mtrr(unsigned int reg, unsigned long base, */ { unsigned long flags; + struct mtrr_var_range *vr; + + vr = &mtrr_state.var_ranges[reg]; local_irq_save(flags); prepare_set(); @@ -343,11 +338,15 @@ static void generic_set_mtrr(unsigned int reg, unsigned long base, /* The invalid bit is kept in the mask, so we simply clear the relevant mask register to disable a range. */ mtrr_wrmsr(MTRRphysMask_MSR(reg), 0, 0); + memset(vr, 0, sizeof(struct mtrr_var_range)); } else { - mtrr_wrmsr(MTRRphysBase_MSR(reg), base << PAGE_SHIFT | type, - (base & size_and_mask) >> (32 - PAGE_SHIFT)); - mtrr_wrmsr(MTRRphysMask_MSR(reg), -size << PAGE_SHIFT | 0x800, - (-size & size_and_mask) >> (32 - PAGE_SHIFT)); + vr->base_lo = base << PAGE_SHIFT | type; + vr->base_hi = (base & size_and_mask) >> (32 - PAGE_SHIFT); + vr->mask_lo = -size << PAGE_SHIFT | 0x800; + vr->mask_hi = (-size & size_and_mask) >> (32 - PAGE_SHIFT); + + mtrr_wrmsr(MTRRphysBase_MSR(reg), vr->base_lo, vr->base_hi); + mtrr_wrmsr(MTRRphysMask_MSR(reg), vr->mask_lo, vr->mask_hi); } post_set(); diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c index e1c2042b9b7e..764cac64e211 100644 --- a/arch/i386/kernel/cpu/mtrr/main.c +++ b/arch/i386/kernel/cpu/mtrr/main.c @@ -332,6 +332,8 @@ int mtrr_add_page(unsigned long base, unsigned long size, error = -EINVAL; + /* No CPU hotplug when we change MTRR entries */ + lock_cpu_hotplug(); /* Search for existing MTRR */ down(&main_lock); for (i = 0; i < num_var_ranges; ++i) { @@ -372,9 +374,23 @@ int mtrr_add_page(unsigned long base, unsigned long size, error = i; out: up(&main_lock); + unlock_cpu_hotplug(); return error; } +static int mtrr_check(unsigned long base, unsigned long size) +{ + if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) { + printk(KERN_WARNING + "mtrr: size and base must be multiples of 4 kiB\n"); + printk(KERN_DEBUG + "mtrr: size: 0x%lx base: 0x%lx\n", size, base); + dump_stack(); + return -1; + } + return 0; +} + /** * mtrr_add - Add a memory type region * @base: Physical base address of region @@ -415,11 +431,8 @@ int mtrr_add(unsigned long base, unsigned long size, unsigned int type, char increment) { - if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) { - printk(KERN_WARNING "mtrr: size and base must be multiples of 4 kiB\n"); - printk(KERN_DEBUG "mtrr: size: 0x%lx base: 0x%lx\n", size, base); + if (mtrr_check(base, size)) return -EINVAL; - } return mtrr_add_page(base >> PAGE_SHIFT, size >> PAGE_SHIFT, type, increment); } @@ -451,6 +464,8 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size) return -ENXIO; max = num_var_ranges; + /* No CPU hotplug when we change MTRR entries */ + lock_cpu_hotplug(); down(&main_lock); if (reg < 0) { /* Search for existing MTRR */ @@ -491,6 +506,7 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size) error = reg; out: up(&main_lock); + unlock_cpu_hotplug(); return error; } /** @@ -511,11 +527,8 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size) int mtrr_del(int reg, unsigned long base, unsigned long size) { - if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) { - printk(KERN_INFO "mtrr: size and base must be multiples of 4 kiB\n"); - printk(KERN_DEBUG "mtrr: size: 0x%lx base: 0x%lx\n", size, base); + if (mtrr_check(base, size)) return -EINVAL; - } return mtrr_del_page(reg, base >> PAGE_SHIFT, size >> PAGE_SHIFT); } @@ -537,21 +550,9 @@ static void __init init_ifs(void) centaur_init_mtrr(); } -static void __init init_other_cpus(void) -{ - if (use_intel()) - get_mtrr_state(); - - /* bring up the other processors */ - set_mtrr(~0U,0,0,0); - - if (use_intel()) { - finalize_mtrr_state(); - mtrr_state_warn(); - } -} - - +/* The suspend/resume methods are only for CPU without MTRR. CPU using generic + * MTRR driver doesn't require this + */ struct mtrr_value { mtrr_type ltype; unsigned long lbase; @@ -604,13 +605,13 @@ static struct sysdev_driver mtrr_sysdev_driver = { /** - * mtrr_init - initialize mtrrs on the boot CPU + * mtrr_bp_init - initialize mtrrs on the boot CPU * * This needs to be called early; before any of the other CPUs are * initialized (i.e. before smp_init()). * */ -static int __init mtrr_init(void) +void __init mtrr_bp_init(void) { init_ifs(); @@ -667,12 +668,48 @@ static int __init mtrr_init(void) if (mtrr_if) { set_num_var_ranges(); init_table(); - init_other_cpus(); - - return sysdev_driver_register(&cpu_sysdev_class, - &mtrr_sysdev_driver); + if (use_intel()) + get_mtrr_state(); } - return -ENXIO; } -subsys_initcall(mtrr_init); +void mtrr_ap_init(void) +{ + unsigned long flags; + + if (!mtrr_if || !use_intel()) + return; + /* + * Ideally we should hold main_lock here to avoid mtrr entries changed, + * but this routine will be called in cpu boot time, holding the lock + * breaks it. This routine is called in two cases: 1.very earily time + * of software resume, when there absolutely isn't mtrr entry changes; + * 2.cpu hotadd time. We let mtrr_add/del_page hold cpuhotplug lock to + * prevent mtrr entry changes + */ + local_irq_save(flags); + + mtrr_if->set_all(); + + local_irq_restore(flags); +} + +static int __init mtrr_init_finialize(void) +{ + if (!mtrr_if) + return 0; + if (use_intel()) + mtrr_state_warn(); + else { + /* The CPUs haven't MTRR and seemes not support SMP. They have + * specific drivers, we use a tricky method to support + * suspend/resume for them. + * TBD: is there any system with such CPU which supports + * suspend/resume? if no, we should remove the code. + */ + sysdev_driver_register(&cpu_sysdev_class, + &mtrr_sysdev_driver); + } + return 0; +} +subsys_initcall(mtrr_init_finialize); diff --git a/arch/i386/kernel/cpu/mtrr/mtrr.h b/arch/i386/kernel/cpu/mtrr/mtrr.h index de1351245599..99c9f2682041 100644 --- a/arch/i386/kernel/cpu/mtrr/mtrr.h +++ b/arch/i386/kernel/cpu/mtrr/mtrr.h @@ -91,7 +91,6 @@ extern struct mtrr_ops * mtrr_if; extern unsigned int num_var_ranges; -void finalize_mtrr_state(void); void mtrr_state_warn(void); char *mtrr_attrib_to_str(int x); void mtrr_wrmsr(unsigned, unsigned, unsigned); diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c index 7323c19f354e..8bd77d948a84 100644 --- a/arch/i386/kernel/cpu/proc.c +++ b/arch/i386/kernel/cpu/proc.c @@ -86,7 +86,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "stepping\t: unknown\n"); if ( cpu_has(c, X86_FEATURE_TSC) ) { - seq_printf(m, "cpu MHz\t\t: %lu.%03lu\n", + seq_printf(m, "cpu MHz\t\t: %u.%03u\n", cpu_khz / 1000, (cpu_khz % 1000)); } diff --git a/arch/i386/kernel/cpu/transmeta.c b/arch/i386/kernel/cpu/transmeta.c index f57e5ee94943..fc426380366b 100644 --- a/arch/i386/kernel/cpu/transmeta.c +++ b/arch/i386/kernel/cpu/transmeta.c @@ -76,6 +76,12 @@ static void __init init_transmeta(struct cpuinfo_x86 *c) #define USER686 (X86_FEATURE_TSC|X86_FEATURE_CX8|X86_FEATURE_CMOV) if ( c->x86 == 5 && (c->x86_capability[0] & USER686) == USER686 ) c->x86 = 6; + +#ifdef CONFIG_SYSCTL + /* randomize_va_space slows us down enormously; + it probably triggers retranslation of x86->native bytecode */ + randomize_va_space = 0; +#endif } static void transmeta_identify(struct cpuinfo_x86 * c) diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c new file mode 100644 index 000000000000..e5fab12f7926 --- /dev/null +++ b/arch/i386/kernel/crash.c @@ -0,0 +1,223 @@ +/* + * Architecture specific (i386) functions for kexec based crash dumps. + * + * Created by: Hariprasad Nellitheertha (hari@in.ibm.com) + * + * Copyright (C) IBM Corporation, 2004. All rights reserved. + * + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/irq.h> +#include <linux/reboot.h> +#include <linux/kexec.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <linux/elf.h> +#include <linux/elfcore.h> + +#include <asm/processor.h> +#include <asm/hardirq.h> +#include <asm/nmi.h> +#include <asm/hw_irq.h> +#include <asm/apic.h> +#include <mach_ipi.h> + + +note_buf_t crash_notes[NR_CPUS]; +/* This keeps a track of which one is crashing cpu. */ +static int crashing_cpu; + +static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data, + size_t data_len) +{ + struct elf_note note; + + note.n_namesz = strlen(name) + 1; + note.n_descsz = data_len; + note.n_type = type; + memcpy(buf, ¬e, sizeof(note)); + buf += (sizeof(note) +3)/4; + memcpy(buf, name, note.n_namesz); + buf += (note.n_namesz + 3)/4; + memcpy(buf, data, note.n_descsz); + buf += (note.n_descsz + 3)/4; + + return buf; +} + +static void final_note(u32 *buf) +{ + struct elf_note note; + + note.n_namesz = 0; + note.n_descsz = 0; + note.n_type = 0; + memcpy(buf, ¬e, sizeof(note)); +} + +static void crash_save_this_cpu(struct pt_regs *regs, int cpu) +{ + struct elf_prstatus prstatus; + u32 *buf; + + if ((cpu < 0) || (cpu >= NR_CPUS)) + return; + + /* Using ELF notes here is opportunistic. + * I need a well defined structure format + * for the data I pass, and I need tags + * on the data to indicate what information I have + * squirrelled away. ELF notes happen to provide + * all of that that no need to invent something new. + */ + buf = &crash_notes[cpu][0]; + memset(&prstatus, 0, sizeof(prstatus)); + prstatus.pr_pid = current->pid; + elf_core_copy_regs(&prstatus.pr_reg, regs); + buf = append_elf_note(buf, "CORE", NT_PRSTATUS, &prstatus, + sizeof(prstatus)); + final_note(buf); +} + +static void crash_get_current_regs(struct pt_regs *regs) +{ + __asm__ __volatile__("movl %%ebx,%0" : "=m"(regs->ebx)); + __asm__ __volatile__("movl %%ecx,%0" : "=m"(regs->ecx)); + __asm__ __volatile__("movl %%edx,%0" : "=m"(regs->edx)); + __asm__ __volatile__("movl %%esi,%0" : "=m"(regs->esi)); + __asm__ __volatile__("movl %%edi,%0" : "=m"(regs->edi)); + __asm__ __volatile__("movl %%ebp,%0" : "=m"(regs->ebp)); + __asm__ __volatile__("movl %%eax,%0" : "=m"(regs->eax)); + __asm__ __volatile__("movl %%esp,%0" : "=m"(regs->esp)); + __asm__ __volatile__("movw %%ss, %%ax;" :"=a"(regs->xss)); + __asm__ __volatile__("movw %%cs, %%ax;" :"=a"(regs->xcs)); + __asm__ __volatile__("movw %%ds, %%ax;" :"=a"(regs->xds)); + __asm__ __volatile__("movw %%es, %%ax;" :"=a"(regs->xes)); + __asm__ __volatile__("pushfl; popl %0" :"=m"(regs->eflags)); + + regs->eip = (unsigned long)current_text_addr(); +} + +/* CPU does not save ss and esp on stack if execution is already + * running in kernel mode at the time of NMI occurrence. This code + * fixes it. + */ +static void crash_setup_regs(struct pt_regs *newregs, struct pt_regs *oldregs) +{ + memcpy(newregs, oldregs, sizeof(*newregs)); + newregs->esp = (unsigned long)&(oldregs->esp); + __asm__ __volatile__("xorl %eax, %eax;"); + __asm__ __volatile__ ("movw %%ss, %%ax;" :"=a"(newregs->xss)); +} + +/* We may have saved_regs from where the error came from + * or it is NULL if via a direct panic(). + */ +static void crash_save_self(struct pt_regs *saved_regs) +{ + struct pt_regs regs; + int cpu; + + cpu = smp_processor_id(); + if (saved_regs) + crash_setup_regs(®s, saved_regs); + else + crash_get_current_regs(®s); + crash_save_this_cpu(®s, cpu); +} + +#ifdef CONFIG_SMP +static atomic_t waiting_for_crash_ipi; + +static int crash_nmi_callback(struct pt_regs *regs, int cpu) +{ + struct pt_regs fixed_regs; + + /* Don't do anything if this handler is invoked on crashing cpu. + * Otherwise, system will completely hang. Crashing cpu can get + * an NMI if system was initially booted with nmi_watchdog parameter. + */ + if (cpu == crashing_cpu) + return 1; + local_irq_disable(); + + if (!user_mode(regs)) { + crash_setup_regs(&fixed_regs, regs); + regs = &fixed_regs; + } + crash_save_this_cpu(regs, cpu); + disable_local_APIC(); + atomic_dec(&waiting_for_crash_ipi); + /* Assume hlt works */ + __asm__("hlt"); + for(;;); + + return 1; +} + +/* + * By using the NMI code instead of a vector we just sneak thru the + * word generator coming out with just what we want. AND it does + * not matter if clustered_apic_mode is set or not. + */ +static void smp_send_nmi_allbutself(void) +{ + send_IPI_allbutself(APIC_DM_NMI); +} + +static void nmi_shootdown_cpus(void) +{ + unsigned long msecs; + + atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); + /* Would it be better to replace the trap vector here? */ + set_nmi_callback(crash_nmi_callback); + /* Ensure the new callback function is set before sending + * out the NMI + */ + wmb(); + + smp_send_nmi_allbutself(); + + msecs = 1000; /* Wait at most a second for the other cpus to stop */ + while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) { + mdelay(1); + msecs--; + } + + /* Leave the nmi callback set */ + disable_local_APIC(); +} +#else +static void nmi_shootdown_cpus(void) +{ + /* There are no cpus to shootdown */ +} +#endif + +void machine_crash_shutdown(struct pt_regs *regs) +{ + /* This function is only called after the system + * has paniced or is otherwise in a critical state. + * The minimum amount of code to allow a kexec'd kernel + * to run successfully needs to happen here. + * + * In practice this means shooting down the other cpus in + * an SMP system. + */ + /* The kernel is broken so disable interrupts */ + local_irq_disable(); + + /* Make a note of crashing cpu. Will be used in NMI callback.*/ + crashing_cpu = smp_processor_id(); + nmi_shootdown_cpus(); + lapic_shutdown(); +#if defined(CONFIG_X86_IO_APIC) + disable_IO_APIC(); +#endif + crash_save_self(regs); +} diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index 6ed7e28f306c..a3cdf894302b 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -1,22 +1,15 @@ #include <linux/types.h> -#include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> #include <linux/module.h> -#include <linux/slab.h> -#include <linux/acpi.h> -#include <asm/io.h> -#include <linux/pm.h> -#include <asm/system.h> #include <linux/dmi.h> #include <linux/bootmem.h> -struct dmi_header -{ - u8 type; - u8 length; - u16 handle; +struct dmi_header { + u8 type; + u8 length; + u16 handle; }; #undef DMI_DEBUG @@ -29,15 +22,13 @@ struct dmi_header static char * __init dmi_string(struct dmi_header *dm, u8 s) { - u8 *bp=(u8 *)dm; - bp+=dm->length; - if(!s) + u8 *bp = ((u8 *) dm) + dm->length; + + if (!s) return ""; s--; - while(s>0 && *bp) - { - bp+=strlen(bp); - bp++; + while (s > 0 && *bp) { + bp += strlen(bp) + 1; s--; } return bp; @@ -47,16 +38,14 @@ static char * __init dmi_string(struct dmi_header *dm, u8 s) * We have to be cautious here. We have seen BIOSes with DMI pointers * pointing to completely the wrong place for example */ - -static int __init dmi_table(u32 base, int len, int num, void (*decode)(struct dmi_header *)) +static int __init dmi_table(u32 base, int len, int num, + void (*decode)(struct dmi_header *)) { - u8 *buf; - struct dmi_header *dm; - u8 *data; - int i=0; + u8 *buf, *data; + int i = 0; buf = bt_ioremap(base, len); - if(buf==NULL) + if (buf == NULL) return -1; data = buf; @@ -65,36 +54,34 @@ static int __init dmi_table(u32 base, int len, int num, void (*decode)(struct dm * Stop when we see all the items the table claimed to have * OR we run off the end of the table (also happens) */ - - while(i<num && data-buf+sizeof(struct dmi_header)<=len) - { - dm=(struct dmi_header *)data; + while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) { + struct dmi_header *dm = (struct dmi_header *)data; /* * We want to know the total length (formated area and strings) * before decoding to make sure we won't run off the table in * dmi_decode or dmi_string */ - data+=dm->length; - while(data-buf<len-1 && (data[0] || data[1])) + data += dm->length; + while ((data - buf < len - 1) && (data[0] || data[1])) data++; - if(data-buf<len-1) + if (data - buf < len - 1) decode(dm); - data+=2; + data += 2; i++; } bt_iounmap(buf, len); return 0; } - -inline static int __init dmi_checksum(u8 *buf) +static int __init dmi_checksum(u8 *buf) { - u8 sum=0; + u8 sum = 0; int a; - for(a=0; a<15; a++) - sum+=buf[a]; - return (sum==0); + for (a = 0; a < 15; a++) + sum += buf[a]; + + return sum == 0; } static int __init dmi_iterate(void (*decode)(struct dmi_header *)) @@ -110,28 +97,30 @@ static int __init dmi_iterate(void (*decode)(struct dmi_header *)) p = ioremap(0xF0000, 0x10000); if (p == NULL) return -1; + for (q = p; q < p + 0x10000; q += 16) { memcpy_fromio(buf, q, 15); - if(memcmp(buf, "_DMI_", 5)==0 && dmi_checksum(buf)) - { - u16 num=buf[13]<<8|buf[12]; - u16 len=buf[7]<<8|buf[6]; - u32 base=buf[11]<<24|buf[10]<<16|buf[9]<<8|buf[8]; + if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) { + u16 num = (buf[13] << 8) | buf[12]; + u16 len = (buf[7] << 8) | buf[6]; + u32 base = (buf[11] << 24) | (buf[10] << 16) | + (buf[9] << 8) | buf[8]; /* * DMI version 0.0 means that the real version is taken from * the SMBIOS version, which we don't know at this point. */ - if(buf[14]!=0) + if (buf[14] != 0) printk(KERN_INFO "DMI %d.%d present.\n", - buf[14]>>4, buf[14]&0x0F); + buf[14] >> 4, buf[14] & 0xF); else printk(KERN_INFO "DMI present.\n"); + dmi_printk((KERN_INFO "%d structures occupying %d bytes.\n", num, len)); - dmi_printk((KERN_INFO "DMI table at 0x%08X.\n", - base)); - if(dmi_table(base,len, num, decode)==0) + dmi_printk((KERN_INFO "DMI table at 0x%08X.\n", base)); + + if (dmi_table(base,len, num, decode) == 0) return 0; } } @@ -143,16 +132,17 @@ static char *dmi_ident[DMI_STRING_MAX]; /* * Save a DMI string */ - static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string) { char *d = (char*)dm; char *p = dmi_string(dm, d[string]); - if(p==NULL || *p == 0) + + if (p == NULL || *p == 0) return; if (dmi_ident[slot]) return; - dmi_ident[slot] = alloc_bootmem(strlen(p)+1); + + dmi_ident[slot] = alloc_bootmem(strlen(p) + 1); if(dmi_ident[slot]) strcpy(dmi_ident[slot], p); else @@ -160,281 +150,47 @@ static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string) } /* - * Ugly compatibility crap. - */ -#define dmi_blacklist dmi_system_id -#define NO_MATCH { DMI_NONE, NULL} -#define MATCH DMI_MATCH - -/* - * Toshiba keyboard likes to repeat keys when they are not repeated. - */ - -static __init int broken_toshiba_keyboard(struct dmi_blacklist *d) -{ - printk(KERN_WARNING "Toshiba with broken keyboard detected. If your keyboard sometimes generates 3 keypresses instead of one, see http://davyd.ucc.asn.au/projects/toshiba/README\n"); - return 0; -} - - -#ifdef CONFIG_ACPI_SLEEP -static __init int reset_videomode_after_s3(struct dmi_blacklist *d) -{ - /* See acpi_wakeup.S */ - extern long acpi_video_flags; - acpi_video_flags |= 2; - return 0; -} -#endif - - -#ifdef CONFIG_ACPI_BOOT -extern int acpi_force; - -static __init __attribute__((unused)) int dmi_disable_acpi(struct dmi_blacklist *d) -{ - if (!acpi_force) { - printk(KERN_NOTICE "%s detected: acpi off\n",d->ident); - disable_acpi(); - } else { - printk(KERN_NOTICE - "Warning: DMI blacklist says broken, but acpi forced\n"); - } - return 0; -} - -/* - * Limit ACPI to CPU enumeration for HT - */ -static __init __attribute__((unused)) int force_acpi_ht(struct dmi_blacklist *d) -{ - if (!acpi_force) { - printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", d->ident); - disable_acpi(); - acpi_ht = 1; - } else { - printk(KERN_NOTICE - "Warning: acpi=force overrules DMI blacklist: acpi=ht\n"); - } - return 0; -} -#endif - -#ifdef CONFIG_ACPI_PCI -static __init int disable_acpi_irq(struct dmi_blacklist *d) -{ - if (!acpi_force) { - printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n", - d->ident); - acpi_noirq_set(); - } - return 0; -} -static __init int disable_acpi_pci(struct dmi_blacklist *d) -{ - if (!acpi_force) { - printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n", - d->ident); - acpi_disable_pci(); - } - return 0; -} -#endif - -/* - * Process the DMI blacklists - */ - - -/* - * This will be expanded over time to force things like the APM - * interrupt mask settings according to the laptop - */ - -static __initdata struct dmi_blacklist dmi_blacklist[]={ - - { broken_toshiba_keyboard, "Toshiba Satellite 4030cdt", { /* Keyboard generates spurious repeats */ - MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"), - NO_MATCH, NO_MATCH, NO_MATCH - } }, -#ifdef CONFIG_ACPI_SLEEP - { reset_videomode_after_s3, "Toshiba Satellite 4030cdt", { /* Reset video mode after returning from ACPI S3 sleep */ - MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"), - NO_MATCH, NO_MATCH, NO_MATCH - } }, -#endif - -#ifdef CONFIG_ACPI_BOOT - /* - * If your system is blacklisted here, but you find that acpi=force - * works for you, please contact acpi-devel@sourceforge.net - */ - - /* - * Boxes that need ACPI disabled - */ - - { dmi_disable_acpi, "IBM Thinkpad", { - MATCH(DMI_BOARD_VENDOR, "IBM"), - MATCH(DMI_BOARD_NAME, "2629H1G"), - NO_MATCH, NO_MATCH }}, - - /* - * Boxes that need acpi=ht - */ - - { force_acpi_ht, "FSC Primergy T850", { - MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "DELL GX240", { - MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"), - MATCH(DMI_BOARD_NAME, "OptiPlex GX240"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "HP VISUALIZE NT Workstation", { - MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), - MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "Compaq Workstation W8000", { - MATCH(DMI_SYS_VENDOR, "Compaq"), - MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "ASUS P4B266", { - MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - MATCH(DMI_BOARD_NAME, "P4B266"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "ASUS P2B-DS", { - MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - MATCH(DMI_BOARD_NAME, "P2B-DS"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "ASUS CUR-DLS", { - MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - MATCH(DMI_BOARD_NAME, "CUR-DLS"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "ABIT i440BX-W83977", { - MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"), - MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "IBM Bladecenter", { - MATCH(DMI_BOARD_VENDOR, "IBM"), - MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "IBM eServer xSeries 360", { - MATCH(DMI_BOARD_VENDOR, "IBM"), - MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "IBM eserver xSeries 330", { - MATCH(DMI_BOARD_VENDOR, "IBM"), - MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), - NO_MATCH, NO_MATCH }}, - - { force_acpi_ht, "IBM eserver xSeries 440", { - MATCH(DMI_BOARD_VENDOR, "IBM"), - MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), - NO_MATCH, NO_MATCH }}, - -#endif // CONFIG_ACPI_BOOT - -#ifdef CONFIG_ACPI_PCI - /* - * Boxes that need ACPI PCI IRQ routing disabled - */ - - { disable_acpi_irq, "ASUS A7V", { - MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"), - MATCH(DMI_BOARD_NAME, "<A7V>"), - /* newer BIOS, Revision 1011, does work */ - MATCH(DMI_BIOS_VERSION, "ASUS A7V ACPI BIOS Revision 1007"), - NO_MATCH }}, - - /* - * Boxes that need ACPI PCI IRQ routing and PCI scan disabled - */ - { disable_acpi_pci, "ASUS PR-DLS", { /* _BBN 0 bug */ - MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - MATCH(DMI_BOARD_NAME, "PR-DLS"), - MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"), - MATCH(DMI_BIOS_DATE, "03/21/2003") }}, - - { disable_acpi_pci, "Acer TravelMate 36x Laptop", { - MATCH(DMI_SYS_VENDOR, "Acer"), - MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), - NO_MATCH, NO_MATCH - } }, - -#endif - - { NULL, } -}; - -/* * Process a DMI table entry. Right now all we care about are the BIOS * and machine entries. For 2.5 we should pull the smbus controller info * out of here. */ - static void __init dmi_decode(struct dmi_header *dm) { -#ifdef DMI_DEBUG - u8 *data = (u8 *)dm; -#endif + u8 *data __attribute__((__unused__)) = (u8 *)dm; - switch(dm->type) - { - case 0: - dmi_printk(("BIOS Vendor: %s\n", - dmi_string(dm, data[4]))); - dmi_save_ident(dm, DMI_BIOS_VENDOR, 4); - dmi_printk(("BIOS Version: %s\n", - dmi_string(dm, data[5]))); - dmi_save_ident(dm, DMI_BIOS_VERSION, 5); - dmi_printk(("BIOS Release: %s\n", - dmi_string(dm, data[8]))); - dmi_save_ident(dm, DMI_BIOS_DATE, 8); - break; - case 1: - dmi_printk(("System Vendor: %s\n", - dmi_string(dm, data[4]))); - dmi_save_ident(dm, DMI_SYS_VENDOR, 4); - dmi_printk(("Product Name: %s\n", - dmi_string(dm, data[5]))); - dmi_save_ident(dm, DMI_PRODUCT_NAME, 5); - dmi_printk(("Version: %s\n", - dmi_string(dm, data[6]))); - dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6); - dmi_printk(("Serial Number: %s\n", - dmi_string(dm, data[7]))); - break; - case 2: - dmi_printk(("Board Vendor: %s\n", - dmi_string(dm, data[4]))); - dmi_save_ident(dm, DMI_BOARD_VENDOR, 4); - dmi_printk(("Board Name: %s\n", - dmi_string(dm, data[5]))); - dmi_save_ident(dm, DMI_BOARD_NAME, 5); - dmi_printk(("Board Version: %s\n", - dmi_string(dm, data[6]))); - dmi_save_ident(dm, DMI_BOARD_VERSION, 6); - break; + switch(dm->type) { + case 0: + dmi_printk(("BIOS Vendor: %s\n", dmi_string(dm, data[4]))); + dmi_save_ident(dm, DMI_BIOS_VENDOR, 4); + dmi_printk(("BIOS Version: %s\n", dmi_string(dm, data[5]))); + dmi_save_ident(dm, DMI_BIOS_VERSION, 5); + dmi_printk(("BIOS Release: %s\n", dmi_string(dm, data[8]))); + dmi_save_ident(dm, DMI_BIOS_DATE, 8); + break; + case 1: + dmi_printk(("System Vendor: %s\n", dmi_string(dm, data[4]))); + dmi_save_ident(dm, DMI_SYS_VENDOR, 4); + dmi_printk(("Product Name: %s\n", dmi_string(dm, data[5]))); + dmi_save_ident(dm, DMI_PRODUCT_NAME, 5); + dmi_printk(("Version: %s\n", dmi_string(dm, data[6]))); + dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6); + dmi_printk(("Serial Number: %s\n", dmi_string(dm, data[7]))); + dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7); + break; + case 2: + dmi_printk(("Board Vendor: %s\n", dmi_string(dm, data[4]))); + dmi_save_ident(dm, DMI_BOARD_VENDOR, 4); + dmi_printk(("Board Name: %s\n", dmi_string(dm, data[5]))); + dmi_save_ident(dm, DMI_BOARD_NAME, 5); + dmi_printk(("Board Version: %s\n", dmi_string(dm, data[6]))); + dmi_save_ident(dm, DMI_BOARD_VERSION, 6); + break; } } void __init dmi_scan_machine(void) { - int err = dmi_iterate(dmi_decode); - if(err == 0) - dmi_check_system(dmi_blacklist); - else + if (dmi_iterate(dmi_decode)) printk(KERN_INFO "DMI not present.\n"); } @@ -470,7 +226,6 @@ fail: d++; return count; } - EXPORT_SYMBOL(dmi_check_system); /** @@ -480,8 +235,8 @@ EXPORT_SYMBOL(dmi_check_system); * Returns one DMI data value, can be used to perform * complex DMI data checks. */ -char * dmi_get_system_info(int field) +char *dmi_get_system_info(int field) { return dmi_ident[field]; } - +EXPORT_SYMBOL(dmi_get_system_info); diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c index f732f427b418..385883ea8c19 100644 --- a/arch/i386/kernel/efi.c +++ b/arch/i386/kernel/efi.c @@ -30,6 +30,7 @@ #include <linux/ioport.h> #include <linux/module.h> #include <linux/efi.h> +#include <linux/kexec.h> #include <asm/setup.h> #include <asm/io.h> @@ -598,6 +599,9 @@ efi_initialize_iomem_resources(struct resource *code_resource, if (md->type == EFI_CONVENTIONAL_MEMORY) { request_resource(res, code_resource); request_resource(res, data_resource); +#ifdef CONFIG_KEXEC + request_resource(res, &crashk_res); +#endif } } } diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index e966fc8c44c4..4477bb107098 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -299,7 +299,6 @@ is386: movl $2,%ecx # set MP movl %eax,%cr0 call check_x87 - incb ready lgdt cpu_gdt_descr lidt idt_descr ljmp $(__KERNEL_CS),$1f @@ -316,8 +315,9 @@ is386: movl $2,%ecx # set MP lldt %ax cld # gcc2 wants the direction flag cleared at all times #ifdef CONFIG_SMP - movb ready, %cl - cmpb $1,%cl + movb ready, %cl + movb $1, ready + cmpb $0,%cl je 1f # the first CPU calls start_kernel # all other CPUs call initialize_secondary call initialize_secondary diff --git a/arch/i386/kernel/i386_ksyms.c b/arch/i386/kernel/i386_ksyms.c index 903190a4b3ff..180f070d03cb 100644 --- a/arch/i386/kernel/i386_ksyms.c +++ b/arch/i386/kernel/i386_ksyms.c @@ -1,97 +1,17 @@ #include <linux/config.h> #include <linux/module.h> -#include <linux/smp.h> -#include <linux/user.h> -#include <linux/elfcore.h> -#include <linux/mca.h> -#include <linux/sched.h> -#include <linux/in6.h> -#include <linux/interrupt.h> -#include <linux/smp_lock.h> -#include <linux/pm.h> -#include <linux/pci.h> -#include <linux/apm_bios.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/tty.h> -#include <linux/highmem.h> -#include <linux/time.h> - -#include <asm/semaphore.h> -#include <asm/processor.h> -#include <asm/i387.h> -#include <asm/uaccess.h> #include <asm/checksum.h> -#include <asm/io.h> -#include <asm/delay.h> -#include <asm/irq.h> -#include <asm/mmx.h> #include <asm/desc.h> -#include <asm/pgtable.h> -#include <asm/tlbflush.h> -#include <asm/nmi.h> -#include <asm/ist.h> -#include <asm/kdebug.h> - -extern void dump_thread(struct pt_regs *, struct user *); -extern spinlock_t rtc_lock; /* This is definitely a GPL-only symbol */ EXPORT_SYMBOL_GPL(cpu_gdt_table); -#if defined(CONFIG_APM_MODULE) -extern void machine_real_restart(unsigned char *, int); -EXPORT_SYMBOL(machine_real_restart); -extern void default_idle(void); -EXPORT_SYMBOL(default_idle); -#endif - -#ifdef CONFIG_SMP -extern void FASTCALL( __write_lock_failed(rwlock_t *rw)); -extern void FASTCALL( __read_lock_failed(rwlock_t *rw)); -#endif - -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) || defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE) -extern struct drive_info_struct drive_info; -EXPORT_SYMBOL(drive_info); -#endif - -extern unsigned long cpu_khz; -extern unsigned long get_cmos_time(void); - -/* platform dependent support */ -EXPORT_SYMBOL(boot_cpu_data); -#ifdef CONFIG_DISCONTIGMEM -EXPORT_SYMBOL(node_data); -EXPORT_SYMBOL(physnode_map); -#endif -#ifdef CONFIG_X86_NUMAQ -EXPORT_SYMBOL(xquad_portio); -#endif -EXPORT_SYMBOL(dump_thread); -EXPORT_SYMBOL(dump_fpu); -EXPORT_SYMBOL_GPL(kernel_fpu_begin); -EXPORT_SYMBOL(__ioremap); -EXPORT_SYMBOL(ioremap_nocache); -EXPORT_SYMBOL(iounmap); -EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(pm_idle); -EXPORT_SYMBOL(pm_power_off); -EXPORT_SYMBOL(get_cmos_time); -EXPORT_SYMBOL(cpu_khz); -EXPORT_SYMBOL(apm_info); - EXPORT_SYMBOL(__down_failed); EXPORT_SYMBOL(__down_failed_interruptible); EXPORT_SYMBOL(__down_failed_trylock); EXPORT_SYMBOL(__up_wakeup); /* Networking helper routines. */ EXPORT_SYMBOL(csum_partial_copy_generic); -/* Delay loops */ -EXPORT_SYMBOL(__ndelay); -EXPORT_SYMBOL(__udelay); -EXPORT_SYMBOL(__delay); -EXPORT_SYMBOL(__const_udelay); EXPORT_SYMBOL(__get_user_1); EXPORT_SYMBOL(__get_user_2); @@ -105,87 +25,11 @@ EXPORT_SYMBOL(__put_user_8); EXPORT_SYMBOL(strpbrk); EXPORT_SYMBOL(strstr); -EXPORT_SYMBOL(strncpy_from_user); -EXPORT_SYMBOL(__strncpy_from_user); -EXPORT_SYMBOL(clear_user); -EXPORT_SYMBOL(__clear_user); -EXPORT_SYMBOL(__copy_from_user_ll); -EXPORT_SYMBOL(__copy_to_user_ll); -EXPORT_SYMBOL(strnlen_user); - -EXPORT_SYMBOL(dma_alloc_coherent); -EXPORT_SYMBOL(dma_free_coherent); - -#ifdef CONFIG_PCI -EXPORT_SYMBOL(pci_mem_start); -#endif - -#ifdef CONFIG_PCI_BIOS -EXPORT_SYMBOL(pcibios_set_irq_routing); -EXPORT_SYMBOL(pcibios_get_irq_routing_table); -#endif - -#ifdef CONFIG_X86_USE_3DNOW -EXPORT_SYMBOL(_mmx_memcpy); -EXPORT_SYMBOL(mmx_clear_page); -EXPORT_SYMBOL(mmx_copy_page); -#endif - -#ifdef CONFIG_X86_HT -EXPORT_SYMBOL(smp_num_siblings); -EXPORT_SYMBOL(cpu_sibling_map); -#endif - #ifdef CONFIG_SMP -EXPORT_SYMBOL(cpu_data); -EXPORT_SYMBOL(cpu_online_map); -EXPORT_SYMBOL(cpu_callout_map); +extern void FASTCALL( __write_lock_failed(rwlock_t *rw)); +extern void FASTCALL( __read_lock_failed(rwlock_t *rw)); EXPORT_SYMBOL(__write_lock_failed); EXPORT_SYMBOL(__read_lock_failed); - -/* Global SMP stuff */ -EXPORT_SYMBOL(smp_call_function); - -/* TLB flushing */ -EXPORT_SYMBOL(flush_tlb_page); -#endif - -#ifdef CONFIG_X86_IO_APIC -EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); -#endif - -#ifdef CONFIG_MCA -EXPORT_SYMBOL(machine_id); -#endif - -#ifdef CONFIG_VT -EXPORT_SYMBOL(screen_info); -#endif - -EXPORT_SYMBOL(get_wchan); - -EXPORT_SYMBOL(rtc_lock); - -EXPORT_SYMBOL_GPL(set_nmi_callback); -EXPORT_SYMBOL_GPL(unset_nmi_callback); - -EXPORT_SYMBOL(register_die_notifier); -#ifdef CONFIG_HAVE_DEC_LOCK -EXPORT_SYMBOL(_atomic_dec_and_lock); -#endif - -EXPORT_SYMBOL(__PAGE_KERNEL); - -#ifdef CONFIG_HIGHMEM -EXPORT_SYMBOL(kmap); -EXPORT_SYMBOL(kunmap); -EXPORT_SYMBOL(kmap_atomic); -EXPORT_SYMBOL(kunmap_atomic); -EXPORT_SYMBOL(kmap_atomic_to_page); -#endif - -#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE) -EXPORT_SYMBOL(ist_info); #endif EXPORT_SYMBOL(csum_partial); diff --git a/arch/i386/kernel/i387.c b/arch/i386/kernel/i387.c index c55e037f08f7..d75524758daf 100644 --- a/arch/i386/kernel/i387.c +++ b/arch/i386/kernel/i387.c @@ -10,6 +10,7 @@ #include <linux/config.h> #include <linux/sched.h> +#include <linux/module.h> #include <asm/processor.h> #include <asm/i387.h> #include <asm/math_emu.h> @@ -79,17 +80,7 @@ void kernel_fpu_begin(void) } clts(); } - -void restore_fpu( struct task_struct *tsk ) -{ - if ( cpu_has_fxsr ) { - asm volatile( "fxrstor %0" - : : "m" (tsk->thread.i387.fxsave) ); - } else { - asm volatile( "frstor %0" - : : "m" (tsk->thread.i387.fsave) ); - } -} +EXPORT_SYMBOL_GPL(kernel_fpu_begin); /* * FPU tag word conversions. @@ -526,6 +517,7 @@ int dump_fpu( struct pt_regs *regs, struct user_i387_struct *fpu ) return fpvalid; } +EXPORT_SYMBOL(dump_fpu); int dump_task_fpu(struct task_struct *tsk, struct user_i387_struct *fpu) { diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c index 2c4813b47e57..178f4e9bac9d 100644 --- a/arch/i386/kernel/i8259.c +++ b/arch/i386/kernel/i8259.c @@ -268,10 +268,22 @@ static int i8259A_suspend(struct sys_device *dev, pm_message_t state) return 0; } +static int i8259A_shutdown(struct sys_device *dev) +{ + /* Put the i8259A into a quiescent state that + * the kernel initialization code can get it + * out of. + */ + outb(0xff, 0x21); /* mask all of 8259A-1 */ + outb(0xff, 0xA1); /* mask all of 8259A-1 */ + return 0; +} + static struct sysdev_class i8259_sysdev_class = { set_kset_name("i8259"), .suspend = i8259A_suspend, .resume = i8259A_resume, + .shutdown = i8259A_shutdown, }; static struct sys_device device_i8259A = { diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 7a324e8b86f9..6578f40bd501 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -31,12 +31,13 @@ #include <linux/mc146818rtc.h> #include <linux/compiler.h> #include <linux/acpi.h> - +#include <linux/module.h> #include <linux/sysdev.h> #include <asm/io.h> #include <asm/smp.h> #include <asm/desc.h> #include <asm/timer.h> +#include <asm/i8259.h> #include <mach_apic.h> @@ -573,12 +574,14 @@ static int balanced_irq(void *unused) for ( ; ; ) { set_current_state(TASK_INTERRUPTIBLE); time_remaining = schedule_timeout(time_remaining); - try_to_freeze(PF_FREEZE); + try_to_freeze(); if (time_after(jiffies, prev_balance_time+balanced_irq_interval)) { + preempt_disable(); do_irq_balance(); prev_balance_time = jiffies; time_remaining = balanced_irq_interval; + preempt_enable(); } } return 0; @@ -630,10 +633,8 @@ static int __init balanced_irq_init(void) printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq"); failed: for (i = 0; i < NR_CPUS; i++) { - if(irq_cpu_data[i].irq_delta) - kfree(irq_cpu_data[i].irq_delta); - if(irq_cpu_data[i].last_irq) - kfree(irq_cpu_data[i].last_irq); + kfree(irq_cpu_data[i].irq_delta); + kfree(irq_cpu_data[i].last_irq); } return 0; } @@ -812,6 +813,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) } return best_guess; } +EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); /* * This function currently is only a helper for the i386 smp boot process where @@ -1565,7 +1567,6 @@ void print_all_local_APICs (void) void /*__init*/ print_PIC(void) { - extern spinlock_t i8259A_lock; unsigned int v; unsigned long flags; @@ -1633,12 +1634,43 @@ static void __init enable_IO_APIC(void) */ void disable_IO_APIC(void) { + int pin; /* * Clear the IO-APIC before rebooting: */ clear_IO_APIC(); - disconnect_bsp_APIC(); + /* + * If the i82559 is routed through an IOAPIC + * Put that IOAPIC in virtual wire mode + * so legacy interrups can be delivered. + */ + pin = find_isa_irq_pin(0, mp_ExtINT); + if (pin != -1) { + struct IO_APIC_route_entry entry; + unsigned long flags; + + memset(&entry, 0, sizeof(entry)); + entry.mask = 0; /* Enabled */ + entry.trigger = 0; /* Edge */ + entry.irr = 0; + entry.polarity = 0; /* High */ + entry.delivery_status = 0; + entry.dest_mode = 0; /* Physical */ + entry.delivery_mode = 7; /* ExtInt */ + entry.vector = 0; + entry.dest.physical.physical_dest = 0; + + + /* + * Add it to the IO-APIC irq-routing table: + */ + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1)); + io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0)); + spin_unlock_irqrestore(&ioapic_lock, flags); + } + disconnect_bsp_APIC(pin != -1); } /* @@ -1659,6 +1691,12 @@ static void __init setup_ioapic_ids_from_mpc(void) unsigned long flags; /* + * Don't check I/O APIC IDs for xAPIC systems. They have + * no meaning without the serial APIC bus. + */ + if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && boot_cpu_data.x86 < 15)) + return; + /* * This is broken; anything with a real cpu count has to * circumvent this idiocy regardless. */ @@ -1684,10 +1722,6 @@ static void __init setup_ioapic_ids_from_mpc(void) mp_ioapics[apic].mpc_apicid = reg_00.bits.ID; } - /* Don't check I/O APIC IDs for some xAPIC systems. They have - * no meaning without the serial APIC bus. */ - if (NO_IOAPIC_CHECK) - continue; /* * Sanity check, is the ID really free? Every APIC in a * system must have a unique ID or we get lots of nice diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c index 73945a3c53c4..ce66dcc26d90 100644 --- a/arch/i386/kernel/irq.c +++ b/arch/i386/kernel/irq.c @@ -15,6 +15,9 @@ #include <linux/seq_file.h> #include <linux/interrupt.h> #include <linux/kernel_stat.h> +#include <linux/notifier.h> +#include <linux/cpu.h> +#include <linux/delay.h> DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_maxaligned_in_smp; EXPORT_PER_CPU_SYMBOL(irq_stat); @@ -153,6 +156,11 @@ void irq_ctx_init(int cpu) cpu,hardirq_ctx[cpu],softirq_ctx[cpu]); } +void irq_ctx_exit(int cpu) +{ + hardirq_ctx[cpu] = NULL; +} + extern asmlinkage void __do_softirq(void); asmlinkage void do_softirq(void) @@ -210,9 +218,8 @@ int show_interrupts(struct seq_file *p, void *v) if (i == 0) { seq_printf(p, " "); - for (j=0; j<NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "CPU%d ",j); + for_each_cpu(j) + seq_printf(p, "CPU%d ",j); seq_putc(p, '\n'); } @@ -225,9 +232,8 @@ int show_interrupts(struct seq_file *p, void *v) #ifndef CONFIG_SMP seq_printf(p, "%10u ", kstat_irqs(i)); #else - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); + for_each_cpu(j) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); #endif seq_printf(p, " %14s", irq_desc[i].handler->typename); seq_printf(p, " %s", action->name); @@ -240,16 +246,14 @@ skip: spin_unlock_irqrestore(&irq_desc[i].lock, flags); } else if (i == NR_IRQS) { seq_printf(p, "NMI: "); - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", nmi_count(j)); + for_each_cpu(j) + seq_printf(p, "%10u ", nmi_count(j)); seq_putc(p, '\n'); #ifdef CONFIG_X86_LOCAL_APIC seq_printf(p, "LOC: "); - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", - per_cpu(irq_stat,j).apic_timer_irqs); + for_each_cpu(j) + seq_printf(p, "%10u ", + per_cpu(irq_stat,j).apic_timer_irqs); seq_putc(p, '\n'); #endif seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); @@ -259,3 +263,45 @@ skip: } return 0; } + +#ifdef CONFIG_HOTPLUG_CPU +#include <mach_apic.h> + +void fixup_irqs(cpumask_t map) +{ + unsigned int irq; + static int warned; + + for (irq = 0; irq < NR_IRQS; irq++) { + cpumask_t mask; + if (irq == 2) + continue; + + cpus_and(mask, irq_affinity[irq], map); + if (any_online_cpu(mask) == NR_CPUS) { + printk("Breaking affinity for irq %i\n", irq); + mask = map; + } + if (irq_desc[irq].handler->set_affinity) + irq_desc[irq].handler->set_affinity(irq, mask); + else if (irq_desc[irq].action && !(warned++)) + printk("Cannot set affinity for irq %i\n", irq); + } + +#if 0 + barrier(); + /* Ingo Molnar says: "after the IO-APIC masks have been redirected + [note the nop - the interrupt-enable boundary on x86 is two + instructions from sti] - to flush out pending hardirqs and + IPIs. After this point nothing is supposed to reach this CPU." */ + __asm__ __volatile__("sti; nop; cli"); + barrier(); +#else + /* That doesn't seem sufficient. Give it 1ms. */ + local_irq_enable(); + mdelay(1); + local_irq_disable(); +#endif +} +#endif + diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 59ff9b455069..a6d8c45961d3 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -23,6 +23,9 @@ * Rusty Russell). * 2004-July Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes * interface to access function arguments. + * 2005-May Hien Nguyen <hien@us.ibm.com>, Jim Keniston + * <jkenisto@us.ibm.com> and Prasanna S Panchamukhi + * <prasanna@in.ibm.com> added function-return probes. */ #include <linux/config.h> @@ -30,15 +33,14 @@ #include <linux/ptrace.h> #include <linux/spinlock.h> #include <linux/preempt.h> +#include <asm/cacheflush.h> #include <asm/kdebug.h> #include <asm/desc.h> -/* kprobe_status settings */ -#define KPROBE_HIT_ACTIVE 0x00000001 -#define KPROBE_HIT_SS 0x00000002 - static struct kprobe *current_kprobe; static unsigned long kprobe_status, kprobe_old_eflags, kprobe_saved_eflags; +static struct kprobe *kprobe_prev; +static unsigned long kprobe_status_prev, kprobe_old_eflags_prev, kprobe_saved_eflags_prev; static struct pt_regs jprobe_saved_regs; static long *jprobe_saved_esp; /* copy of the kernel stack at the probe fire time */ @@ -68,16 +70,50 @@ int arch_prepare_kprobe(struct kprobe *p) void arch_copy_kprobe(struct kprobe *p) { memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); + p->opcode = *p->addr; } -void arch_remove_kprobe(struct kprobe *p) +void arch_arm_kprobe(struct kprobe *p) { + *p->addr = BREAKPOINT_INSTRUCTION; + flush_icache_range((unsigned long) p->addr, + (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } -static inline void disarm_kprobe(struct kprobe *p, struct pt_regs *regs) +void arch_disarm_kprobe(struct kprobe *p) { *p->addr = p->opcode; - regs->eip = (unsigned long)p->addr; + flush_icache_range((unsigned long) p->addr, + (unsigned long) p->addr + sizeof(kprobe_opcode_t)); +} + +void arch_remove_kprobe(struct kprobe *p) +{ +} + +static inline void save_previous_kprobe(void) +{ + kprobe_prev = current_kprobe; + kprobe_status_prev = kprobe_status; + kprobe_old_eflags_prev = kprobe_old_eflags; + kprobe_saved_eflags_prev = kprobe_saved_eflags; +} + +static inline void restore_previous_kprobe(void) +{ + current_kprobe = kprobe_prev; + kprobe_status = kprobe_status_prev; + kprobe_old_eflags = kprobe_old_eflags_prev; + kprobe_saved_eflags = kprobe_saved_eflags_prev; +} + +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) +{ + current_kprobe = p; + kprobe_saved_eflags = kprobe_old_eflags + = (regs->eflags & (TF_MASK | IF_MASK)); + if (is_IF_modifier(p->opcode)) + kprobe_saved_eflags &= ~IF_MASK; } static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) @@ -91,6 +127,25 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->eip = (unsigned long)&p->ainsn.insn; } +void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) +{ + unsigned long *sara = (unsigned long *)®s->esp; + struct kretprobe_instance *ri; + + if ((ri = get_free_rp_inst(rp)) != NULL) { + ri->rp = rp; + ri->task = current; + ri->ret_addr = (kprobe_opcode_t *) *sara; + + /* Replace the return addr with trampoline addr */ + *sara = (unsigned long) &kretprobe_trampoline; + + add_rp_inst(ri); + } else { + rp->nmissed++; + } +} + /* * Interrupts are disabled on entry as trap3 is an interrupt gate and they * remain disabled thorough out this function. @@ -127,8 +182,18 @@ static int kprobe_handler(struct pt_regs *regs) unlock_kprobes(); goto no_kprobe; } - disarm_kprobe(p, regs); - ret = 1; + /* We have reentered the kprobe_handler(), since + * another probe was hit while within the handler. + * We here save the original kprobes variables and + * just single step on the instruction of the new probe + * without calling any user handlers. + */ + save_previous_kprobe(); + set_current_kprobe(p, regs); + p->nmissed++; + prepare_singlestep(p, regs); + kprobe_status = KPROBE_REENTER; + return 1; } else { p = current_kprobe; if (p->break_handler && p->break_handler(p, regs)) { @@ -163,11 +228,7 @@ static int kprobe_handler(struct pt_regs *regs) } kprobe_status = KPROBE_HIT_ACTIVE; - current_kprobe = p; - kprobe_saved_eflags = kprobe_old_eflags - = (regs->eflags & (TF_MASK | IF_MASK)); - if (is_IF_modifier(p->opcode)) - kprobe_saved_eflags &= ~IF_MASK; + set_current_kprobe(p, regs); if (p->pre_handler && p->pre_handler(p, regs)) /* handler has already set things up, so skip ss setup */ @@ -184,6 +245,78 @@ no_kprobe: } /* + * For function-return probes, init_kprobes() establishes a probepoint + * here. When a retprobed function returns, this probe is hit and + * trampoline_probe_handler() runs, calling the kretprobe's handler. + */ + void kretprobe_trampoline_holder(void) + { + asm volatile ( ".global kretprobe_trampoline\n" + "kretprobe_trampoline: \n" + "nop\n"); + } + +/* + * Called when we hit the probe point at kretprobe_trampoline + */ +int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct kretprobe_instance *ri = NULL; + struct hlist_head *head; + struct hlist_node *node, *tmp; + unsigned long orig_ret_address = 0; + unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + + head = kretprobe_inst_table_head(current); + + /* + * It is possible to have multiple instances associated with a given + * task either because an multiple functions in the call path + * have a return probe installed on them, and/or more then one return + * return probe was registered for a target function. + * + * We can handle this because: + * - instances are always inserted at the head of the list + * - when multiple return probes are registered for the same + * function, the first instance's ret_addr will point to the + * real return address, and all the rest will point to + * kretprobe_trampoline + */ + hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { + if (ri->task != current) + /* another task is sharing our hash bucket */ + continue; + + if (ri->rp && ri->rp->handler) + ri->rp->handler(ri, regs); + + orig_ret_address = (unsigned long)ri->ret_addr; + recycle_rp_inst(ri); + + if (orig_ret_address != trampoline_address) + /* + * This is the real return address. Any other + * instances associated with this task are for + * other calls deeper on the call stack + */ + break; + } + + BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); + regs->eip = orig_ret_address; + + unlock_kprobes(); + preempt_enable_no_resched(); + + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we have handled unlocking + * and re-enabling preemption. + */ + return 1; +} + +/* * Called after single-stepping. p->addr is the address of the * instruction whose first byte has been replaced by the "int 3" * instruction. To avoid the SMP problems that can occur when we @@ -263,13 +396,21 @@ static inline int post_kprobe_handler(struct pt_regs *regs) if (!kprobe_running()) return 0; - if (current_kprobe->post_handler) + if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { + kprobe_status = KPROBE_HIT_SSDONE; current_kprobe->post_handler(current_kprobe, regs, 0); + } resume_execution(current_kprobe, regs); regs->eflags |= kprobe_saved_eflags; + /*Restore back the original saved kprobes variables and continue. */ + if (kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(); + goto out; + } unlock_kprobes(); +out: preempt_enable_no_resched(); /* @@ -390,3 +531,13 @@ int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) } return 0; } + +static struct kprobe trampoline_p = { + .addr = (kprobe_opcode_t *) &kretprobe_trampoline, + .pre_handler = trampoline_probe_handler +}; + +int __init arch_init_kprobes(void) +{ + return register_kprobe(&trampoline_p); +} diff --git a/arch/i386/kernel/machine_kexec.c b/arch/i386/kernel/machine_kexec.c new file mode 100644 index 000000000000..cb699a2aa1f8 --- /dev/null +++ b/arch/i386/kernel/machine_kexec.c @@ -0,0 +1,226 @@ +/* + * machine_kexec.c - handle transition of Linux booting another kernel + * Copyright (C) 2002-2005 Eric Biederman <ebiederm@xmission.com> + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/mm.h> +#include <linux/kexec.h> +#include <linux/delay.h> +#include <asm/pgtable.h> +#include <asm/pgalloc.h> +#include <asm/tlbflush.h> +#include <asm/mmu_context.h> +#include <asm/io.h> +#include <asm/apic.h> +#include <asm/cpufeature.h> +#include <asm/desc.h> + +static inline unsigned long read_cr3(void) +{ + unsigned long cr3; + asm volatile("movl %%cr3,%0": "=r"(cr3)); + return cr3; +} + +#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE))) + +#define L0_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) +#define L1_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) +#define L2_ATTR (_PAGE_PRESENT) + +#define LEVEL0_SIZE (1UL << 12UL) + +#ifndef CONFIG_X86_PAE +#define LEVEL1_SIZE (1UL << 22UL) +static u32 pgtable_level1[1024] PAGE_ALIGNED; + +static void identity_map_page(unsigned long address) +{ + unsigned long level1_index, level2_index; + u32 *pgtable_level2; + + /* Find the current page table */ + pgtable_level2 = __va(read_cr3()); + + /* Find the indexes of the physical address to identity map */ + level1_index = (address % LEVEL1_SIZE)/LEVEL0_SIZE; + level2_index = address / LEVEL1_SIZE; + + /* Identity map the page table entry */ + pgtable_level1[level1_index] = address | L0_ATTR; + pgtable_level2[level2_index] = __pa(pgtable_level1) | L1_ATTR; + + /* Flush the tlb so the new mapping takes effect. + * Global tlb entries are not flushed but that is not an issue. + */ + load_cr3(pgtable_level2); +} + +#else +#define LEVEL1_SIZE (1UL << 21UL) +#define LEVEL2_SIZE (1UL << 30UL) +static u64 pgtable_level1[512] PAGE_ALIGNED; +static u64 pgtable_level2[512] PAGE_ALIGNED; + +static void identity_map_page(unsigned long address) +{ + unsigned long level1_index, level2_index, level3_index; + u64 *pgtable_level3; + + /* Find the current page table */ + pgtable_level3 = __va(read_cr3()); + + /* Find the indexes of the physical address to identity map */ + level1_index = (address % LEVEL1_SIZE)/LEVEL0_SIZE; + level2_index = (address % LEVEL2_SIZE)/LEVEL1_SIZE; + level3_index = address / LEVEL2_SIZE; + + /* Identity map the page table entry */ + pgtable_level1[level1_index] = address | L0_ATTR; + pgtable_level2[level2_index] = __pa(pgtable_level1) | L1_ATTR; + set_64bit(&pgtable_level3[level3_index], + __pa(pgtable_level2) | L2_ATTR); + + /* Flush the tlb so the new mapping takes effect. + * Global tlb entries are not flushed but that is not an issue. + */ + load_cr3(pgtable_level3); +} +#endif + +static void set_idt(void *newidt, __u16 limit) +{ + struct Xgt_desc_struct curidt; + + /* ia32 supports unaliged loads & stores */ + curidt.size = limit; + curidt.address = (unsigned long)newidt; + + __asm__ __volatile__ ( + "lidtl %0\n" + : : "m" (curidt) + ); +}; + + +static void set_gdt(void *newgdt, __u16 limit) +{ + struct Xgt_desc_struct curgdt; + + /* ia32 supports unaligned loads & stores */ + curgdt.size = limit; + curgdt.address = (unsigned long)newgdt; + + __asm__ __volatile__ ( + "lgdtl %0\n" + : : "m" (curgdt) + ); +}; + +static void load_segments(void) +{ +#define __STR(X) #X +#define STR(X) __STR(X) + + __asm__ __volatile__ ( + "\tljmp $"STR(__KERNEL_CS)",$1f\n" + "\t1:\n" + "\tmovl $"STR(__KERNEL_DS)",%eax\n" + "\tmovl %eax,%ds\n" + "\tmovl %eax,%es\n" + "\tmovl %eax,%fs\n" + "\tmovl %eax,%gs\n" + "\tmovl %eax,%ss\n" + ); +#undef STR +#undef __STR +} + +typedef asmlinkage NORET_TYPE void (*relocate_new_kernel_t)( + unsigned long indirection_page, + unsigned long reboot_code_buffer, + unsigned long start_address, + unsigned int has_pae) ATTRIB_NORET; + +const extern unsigned char relocate_new_kernel[]; +extern void relocate_new_kernel_end(void); +const extern unsigned int relocate_new_kernel_size; + +/* + * A architecture hook called to validate the + * proposed image and prepare the control pages + * as needed. The pages for KEXEC_CONTROL_CODE_SIZE + * have been allocated, but the segments have yet + * been copied into the kernel. + * + * Do what every setup is needed on image and the + * reboot code buffer to allow us to avoid allocations + * later. + * + * Currently nothing. + */ +int machine_kexec_prepare(struct kimage *image) +{ + return 0; +} + +/* + * Undo anything leftover by machine_kexec_prepare + * when an image is freed. + */ +void machine_kexec_cleanup(struct kimage *image) +{ +} + +/* + * Do not allocate memory (or fail in any way) in machine_kexec(). + * We are past the point of no return, committed to rebooting now. + */ +NORET_TYPE void machine_kexec(struct kimage *image) +{ + unsigned long page_list; + unsigned long reboot_code_buffer; + + relocate_new_kernel_t rnk; + + /* Interrupts aren't acceptable while we reboot */ + local_irq_disable(); + + /* Compute some offsets */ + reboot_code_buffer = page_to_pfn(image->control_code_page) + << PAGE_SHIFT; + page_list = image->head; + + /* Set up an identity mapping for the reboot_code_buffer */ + identity_map_page(reboot_code_buffer); + + /* copy it out */ + memcpy((void *)reboot_code_buffer, relocate_new_kernel, + relocate_new_kernel_size); + + /* The segment registers are funny things, they are + * automatically loaded from a table, in memory wherever you + * set them to a specific selector, but this table is never + * accessed again you set the segment to a different selector. + * + * The more common model is are caches where the behide + * the scenes work is done, but is also dropped at arbitrary + * times. + * + * I take advantage of this here by force loading the + * segments, before I zap the gdt with an invalid value. + */ + load_segments(); + /* The gdt & idt are now invalid. + * If you want to load them you must set up your own idt & gdt. + */ + set_gdt(phys_to_virt(0),0); + set_idt(phys_to_virt(0),0); + + /* now call it */ + rnk = (relocate_new_kernel_t) reboot_code_buffer; + (*rnk)(page_list, reboot_code_buffer, image->start, cpu_has_pae); +} diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index 1347ab4939e7..ce838abb27d8 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -67,7 +67,6 @@ unsigned long mp_lapic_addr; /* Processor that is doing the boot up */ unsigned int boot_cpu_physical_apicid = -1U; -unsigned int boot_cpu_logical_apicid = -1U; /* Internal processor count */ static unsigned int __initdata num_processors; @@ -180,7 +179,6 @@ static void __init MP_processor_info (struct mpc_config_processor *m) if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { Dprintk(" Bootup CPU\n"); boot_cpu_physical_apicid = m->mpc_apicid; - boot_cpu_logical_apicid = apicid; } if (num_processors >= NR_CPUS) { @@ -914,7 +912,10 @@ void __init mp_register_ioapic ( mp_ioapics[idx].mpc_apicaddr = address; set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id); + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 < 15)) + mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id); + else + mp_ioapics[idx].mpc_apicid = id; mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); /* @@ -1055,11 +1056,20 @@ void __init mp_config_acpi_legacy_irqs (void) } } +#define MAX_GSI_NUM 4096 + int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) { int ioapic = -1; int ioapic_pin = 0; int idx, bit = 0; + static int pci_irq = 16; + /* + * Mapping between Global System Interrups, which + * represent all possible interrupts, and IRQs + * assigned to actual devices. + */ + static int gsi_to_irq[MAX_GSI_NUM]; #ifdef CONFIG_ACPI_BUS /* Don't set up the ACPI SCI because it's already set up */ @@ -1094,11 +1104,34 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) { Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", mp_ioapic_routing[ioapic].apic_id, ioapic_pin); - return gsi; + return gsi_to_irq[gsi]; } mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit); + if (edge_level) { + /* + * For PCI devices assign IRQs in order, avoiding gaps + * due to unused I/O APIC pins. + */ + int irq = gsi; + if (gsi < MAX_GSI_NUM) { + if (gsi > 15) + gsi = pci_irq++; +#ifdef CONFIG_ACPI_BUS + /* + * Don't assign IRQ used by ACPI SCI + */ + if (gsi == acpi_fadt.sci_int) + gsi = pci_irq++; +#endif + gsi_to_irq[irq] = gsi; + } else { + printk(KERN_ERR "GSI %u is too high\n", gsi); + return gsi; + } + } + io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, edge_level == ACPI_EDGE_SENSITIVE ? 0 : 1, active_high_low == ACPI_ACTIVE_HIGH ? 0 : 1); diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 2c0ee9c2d020..da6c46d667cb 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -28,8 +28,7 @@ #include <linux/sysctl.h> #include <asm/smp.h> -#include <asm/mtrr.h> -#include <asm/mpspec.h> +#include <asm/div64.h> #include <asm/nmi.h> #include "mach_traps.h" @@ -324,6 +323,16 @@ static void clear_msr_range(unsigned int base, unsigned int n) wrmsr(base+i, 0, 0); } +static inline void write_watchdog_counter(const char *descr) +{ + u64 count = (u64)cpu_khz * 1000; + + do_div(count, nmi_hz); + if(descr) + Dprintk("setting %s to -0x%08Lx\n", descr, count); + wrmsrl(nmi_perfctr_msr, 0 - count); +} + static void setup_k7_watchdog(void) { unsigned int evntsel; @@ -339,8 +348,7 @@ static void setup_k7_watchdog(void) | K7_NMI_EVENT; wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); - Dprintk("setting K7_PERFCTR0 to %08lx\n", -(cpu_khz/nmi_hz*1000)); - wrmsr(MSR_K7_PERFCTR0, -(cpu_khz/nmi_hz*1000), -1); + write_watchdog_counter("K7_PERFCTR0"); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= K7_EVNTSEL_ENABLE; wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); @@ -361,8 +369,7 @@ static void setup_p6_watchdog(void) | P6_NMI_EVENT; wrmsr(MSR_P6_EVNTSEL0, evntsel, 0); - Dprintk("setting P6_PERFCTR0 to %08lx\n", -(cpu_khz/nmi_hz*1000)); - wrmsr(MSR_P6_PERFCTR0, -(cpu_khz/nmi_hz*1000), 0); + write_watchdog_counter("P6_PERFCTR0"); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= P6_EVNTSEL0_ENABLE; wrmsr(MSR_P6_EVNTSEL0, evntsel, 0); @@ -402,8 +409,7 @@ static int setup_p4_watchdog(void) wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0); wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0); - Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz/nmi_hz*1000)); - wrmsr(MSR_P4_IQ_COUNTER0, -(cpu_khz/nmi_hz*1000), -1); + write_watchdog_counter("P4_IQ_COUNTER0"); apic_write(APIC_LVTPC, APIC_DM_NMI); wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); return 1; @@ -518,7 +524,7 @@ void nmi_watchdog_tick (struct pt_regs * regs) * other P6 variant */ apic_write(APIC_LVTPC, APIC_DM_NMI); } - wrmsr(nmi_perfctr_msr, -(cpu_khz/nmi_hz*1000), -1); + write_watchdog_counter(NULL); } } diff --git a/arch/i386/kernel/numaq.c b/arch/i386/kernel/numaq.c index e51edf0a6564..5f5b075f860a 100644 --- a/arch/i386/kernel/numaq.c +++ b/arch/i386/kernel/numaq.c @@ -31,6 +31,7 @@ #include <linux/nodemask.h> #include <asm/numaq.h> #include <asm/topology.h> +#include <asm/processor.h> #define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT)) @@ -77,3 +78,11 @@ int __init get_memcfg_numaq(void) smp_dump_qct(); return 1; } + +static int __init numaq_dsc_disable(void) +{ + printk(KERN_DEBUG "NUMAQ: disabling TSC\n"); + tsc_disable = 1; + return 0; +} +core_initcall(numaq_dsc_disable); diff --git a/arch/i386/kernel/pci-dma.c b/arch/i386/kernel/pci-dma.c index 4de2e03c7b45..1e51427cc9eb 100644 --- a/arch/i386/kernel/pci-dma.c +++ b/arch/i386/kernel/pci-dma.c @@ -11,6 +11,7 @@ #include <linux/mm.h> #include <linux/string.h> #include <linux/pci.h> +#include <linux/module.h> #include <asm/io.h> struct dma_coherent_mem { @@ -54,6 +55,7 @@ void *dma_alloc_coherent(struct device *dev, size_t size, } return ret; } +EXPORT_SYMBOL(dma_alloc_coherent); void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle) @@ -68,6 +70,7 @@ void dma_free_coherent(struct device *dev, size_t size, } else free_pages((unsigned long)vaddr, order); } +EXPORT_SYMBOL(dma_free_coherent); int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, dma_addr_t device_addr, size_t size, int flags) diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 96e3ea6b17c7..e3f362e8af5b 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -13,6 +13,7 @@ #include <stdarg.h> +#include <linux/cpu.h> #include <linux/errno.h> #include <linux/sched.h> #include <linux/fs.h> @@ -37,6 +38,7 @@ #include <linux/kallsyms.h> #include <linux/ptrace.h> #include <linux/random.h> +#include <linux/kprobes.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -54,6 +56,9 @@ #include <linux/irq.h> #include <linux/err.h> +#include <asm/tlbflush.h> +#include <asm/cpu.h> + asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); static int hlt_counter; @@ -73,6 +78,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk) * Powermanagement idle function, if any.. */ void (*pm_idle)(void); +EXPORT_SYMBOL(pm_idle); static DEFINE_PER_CPU(unsigned int, cpu_idle_state); void disable_hlt(void) @@ -105,6 +111,9 @@ void default_idle(void) cpu_relax(); } } +#ifdef CONFIG_APM_MODULE +EXPORT_SYMBOL(default_idle); +#endif /* * On SMP it's slightly faster (but much more power-consuming!) @@ -138,14 +147,42 @@ static void poll_idle (void) } } +#ifdef CONFIG_HOTPLUG_CPU +#include <asm/nmi.h> +/* We don't actually take CPU down, just spin without interrupts. */ +static inline void play_dead(void) +{ + /* This must be done before dead CPU ack */ + cpu_exit_clear(); + wbinvd(); + mb(); + /* Ack it */ + __get_cpu_var(cpu_state) = CPU_DEAD; + + /* + * With physical CPU hotplug, we should halt the cpu + */ + local_irq_disable(); + while (1) + __asm__ __volatile__("hlt":::"memory"); +} +#else +static inline void play_dead(void) +{ + BUG(); +} +#endif /* CONFIG_HOTPLUG_CPU */ + /* * The idle thread. There's no useful work to be * done, so just try to conserve power and have a * low exit latency (ie sit in a loop waiting for * somebody to say that they'd like to reschedule) */ -void cpu_idle (void) +void cpu_idle(void) { + int cpu = raw_smp_processor_id(); + /* endless idle loop with no priority at all */ while (1) { while (!need_resched()) { @@ -160,6 +197,9 @@ void cpu_idle (void) if (!idle) idle = default_idle; + if (cpu_is_offline(cpu)) + play_dead(); + __get_cpu_var(irq_stat).idle_timestamp = jiffies; idle(); } @@ -218,7 +258,7 @@ static void mwait_idle(void) } } -void __init select_idle_routine(const struct cpuinfo_x86 *c) +void __devinit select_idle_routine(const struct cpuinfo_x86 *c) { if (cpu_has(c, X86_FEATURE_MWAIT)) { printk("monitor/mwait feature present.\n"); @@ -262,7 +302,7 @@ void show_regs(struct pt_regs * regs) printk("EIP: %04x:[<%08lx>] CPU: %d\n",0xffff & regs->xcs,regs->eip, smp_processor_id()); print_symbol("EIP is at %s\n", regs->eip); - if (regs->xcs & 3) + if (user_mode(regs)) printk(" ESP: %04x:%08lx",0xffff & regs->xss,regs->esp); printk(" EFLAGS: %08lx %s (%s)\n", regs->eflags, print_tainted(), system_utsname.release); @@ -325,6 +365,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) /* Ok, create the new process.. */ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); } +EXPORT_SYMBOL(kernel_thread); /* * Free current thread data structures etc.. @@ -334,6 +375,13 @@ void exit_thread(void) struct task_struct *tsk = current; struct thread_struct *t = &tsk->thread; + /* + * Remove function-return probe instances associated with this task + * and put them back on the free list. Do not insert an exit probe for + * this function, it will be disabled by kprobe_flush_task if you do. + */ + kprobe_flush_task(tsk); + /* The process may have allocated an io port bitmap... nuke it. */ if (unlikely(NULL != t->io_bitmap_ptr)) { int cpu = get_cpu(); @@ -357,6 +405,13 @@ void flush_thread(void) { struct task_struct *tsk = current; + /* + * Remove function-return probe instances associated with this task + * and put them back on the free list. Do not insert an exit probe for + * this function, it will be disabled by kprobe_flush_task if you do. + */ + kprobe_flush_task(tsk); + memset(tsk->thread.debugreg, 0, sizeof(unsigned long)*8); memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array)); /* @@ -508,6 +563,7 @@ void dump_thread(struct pt_regs * regs, struct user * dump) dump->u_fpvalid = dump_fpu (regs, &dump->i387); } +EXPORT_SYMBOL(dump_thread); /* * Capture the user space registers if the task is not running (in user space) @@ -561,6 +617,33 @@ handle_io_bitmap(struct thread_struct *next, struct tss_struct *tss) } /* + * This function selects if the context switch from prev to next + * has to tweak the TSC disable bit in the cr4. + */ +static inline void disable_tsc(struct task_struct *prev_p, + struct task_struct *next_p) +{ + struct thread_info *prev, *next; + + /* + * gcc should eliminate the ->thread_info dereference if + * has_secure_computing returns 0 at compile time (SECCOMP=n). + */ + prev = prev_p->thread_info; + next = next_p->thread_info; + + if (has_secure_computing(prev) || has_secure_computing(next)) { + /* slow path here */ + if (has_secure_computing(prev) && + !has_secure_computing(next)) { + write_cr4(read_cr4() & ~X86_CR4_TSD); + } else if (!has_secure_computing(prev) && + has_secure_computing(next)) + write_cr4(read_cr4() | X86_CR4_TSD); + } +} + +/* * switch_to(x,yn) should switch tasks from x to y. * * We fsave/fwait so that an exception goes off at the right time @@ -617,28 +700,34 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas /* * Restore %fs and %gs if needed. + * + * Glibc normally makes %fs be zero, and %gs is one of + * the TLS segments. */ - if (unlikely(prev->fs | prev->gs | next->fs | next->gs)) { + if (unlikely(prev->fs | next->fs)) loadsegment(fs, next->fs); + + if (prev->gs | next->gs) loadsegment(gs, next->gs); - } /* * Now maybe reload the debug registers */ if (unlikely(next->debugreg[7])) { - loaddebug(next, 0); - loaddebug(next, 1); - loaddebug(next, 2); - loaddebug(next, 3); + set_debugreg(next->debugreg[0], 0); + set_debugreg(next->debugreg[1], 1); + set_debugreg(next->debugreg[2], 2); + set_debugreg(next->debugreg[3], 3); /* no 4 and 5 */ - loaddebug(next, 6); - loaddebug(next, 7); + set_debugreg(next->debugreg[6], 6); + set_debugreg(next->debugreg[7], 7); } if (unlikely(prev->io_bitmap_ptr || next->io_bitmap_ptr)) handle_io_bitmap(next, tss); + disable_tsc(prev_p, next_p); + return prev_p; } @@ -731,6 +820,7 @@ unsigned long get_wchan(struct task_struct *p) } while (count++ < 16); return 0; } +EXPORT_SYMBOL(get_wchan); /* * sys_alloc_thread_area: get a yet unused TLS descriptor index. @@ -827,6 +917,8 @@ asmlinkage int sys_get_thread_area(struct user_desc __user *u_info) if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) return -EINVAL; + memset(&info, 0, sizeof(info)); + desc = current->thread.tls_array + idx - GDT_ENTRY_TLS_MIN; info.entry_number = idx; diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index e34f651fa13c..0da59b42843c 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -668,7 +668,7 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code) info.si_code = TRAP_BRKPT; /* User-mode eip? */ - info.si_addr = user_mode(regs) ? (void __user *) regs->eip : NULL; + info.si_addr = user_mode_vm(regs) ? (void __user *) regs->eip : NULL; /* Send us the fakey SIGTRAP */ force_sig_info(SIGTRAP, &info, tsk); diff --git a/arch/i386/kernel/reboot.c b/arch/i386/kernel/reboot.c index 6dc27eb70ee7..c71fef31dc47 100644 --- a/arch/i386/kernel/reboot.c +++ b/arch/i386/kernel/reboot.c @@ -2,6 +2,7 @@ * linux/arch/i386/kernel/reboot.c */ +#include <linux/config.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/delay.h> @@ -19,12 +20,12 @@ * Power off function, if any */ void (*pm_power_off)(void); +EXPORT_SYMBOL(pm_power_off); static int reboot_mode; static int reboot_thru_bios; #ifdef CONFIG_SMP -int reboot_smp = 0; static int reboot_cpu = -1; /* shamelessly grabbed from lib/vsprintf.c for readability */ #define is_digit(c) ((c) >= '0' && (c) <= '9') @@ -47,7 +48,6 @@ static int __init reboot_setup(char *str) break; #ifdef CONFIG_SMP case 's': /* "smp" reboot by executing reset on BSP or other CPU*/ - reboot_smp = 1; if (is_digit(*(str+1))) { reboot_cpu = (int) (*(str+1) - '0'); if (is_digit(*(str+2))) @@ -86,33 +86,9 @@ static int __init set_bios_reboot(struct dmi_system_id *d) return 0; } -/* - * Some machines require the "reboot=s" commandline option, this quirk makes that automatic. - */ -static int __init set_smp_reboot(struct dmi_system_id *d) -{ -#ifdef CONFIG_SMP - if (!reboot_smp) { - reboot_smp = 1; - printk(KERN_INFO "%s series board detected. Selecting SMP-method for reboots.\n", d->ident); - } -#endif - return 0; -} - -/* - * Some machines require the "reboot=b,s" commandline option, this quirk makes that automatic. - */ -static int __init set_smp_bios_reboot(struct dmi_system_id *d) -{ - set_smp_reboot(d); - set_bios_reboot(d); - return 0; -} - static struct dmi_system_id __initdata reboot_dmi_table[] = { { /* Handle problems with rebooting on Dell 1300's */ - .callback = set_smp_bios_reboot, + .callback = set_bios_reboot, .ident = "Dell PowerEdge 1300", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), @@ -295,42 +271,36 @@ void machine_real_restart(unsigned char *code, int length) : : "i" ((void *) (0x1000 - sizeof (real_mode_switch) - 100))); } +#ifdef CONFIG_APM_MODULE +EXPORT_SYMBOL(machine_real_restart); +#endif -void machine_restart(char * __unused) +void machine_shutdown(void) { #ifdef CONFIG_SMP - int cpuid; - - cpuid = GET_APIC_ID(apic_read(APIC_ID)); - - if (reboot_smp) { - - /* check to see if reboot_cpu is valid - if its not, default to the BSP */ - if ((reboot_cpu == -1) || - (reboot_cpu > (NR_CPUS -1)) || - !physid_isset(cpuid, phys_cpu_present_map)) - reboot_cpu = boot_cpu_physical_apicid; - - reboot_smp = 0; /* use this as a flag to only go through this once*/ - /* re-run this function on the other CPUs - it will fall though this section since we have - cleared reboot_smp, and do the reboot if it is the - correct CPU, otherwise it halts. */ - if (reboot_cpu != cpuid) - smp_call_function((void *)machine_restart , NULL, 1, 0); + int reboot_cpu_id; + + /* The boot cpu is always logical cpu 0 */ + reboot_cpu_id = 0; + + /* See if there has been given a command line override */ + if ((reboot_cpu != -1) && (reboot_cpu < NR_CPUS) && + cpu_isset(reboot_cpu, cpu_online_map)) { + reboot_cpu_id = reboot_cpu; } - /* if reboot_cpu is still -1, then we want a tradional reboot, - and if we are not running on the reboot_cpu,, halt */ - if ((reboot_cpu != -1) && (cpuid != reboot_cpu)) { - for (;;) - __asm__ __volatile__ ("hlt"); + /* Make certain the cpu I'm rebooting on is online */ + if (!cpu_isset(reboot_cpu_id, cpu_online_map)) { + reboot_cpu_id = smp_processor_id(); } - /* - * Stop all CPUs and turn off local APICs and the IO-APIC, so - * other OSs see a clean IRQ state. + + /* Make certain I only run on the appropriate processor */ + set_cpus_allowed(current, cpumask_of_cpu(reboot_cpu_id)); + + /* O.K. Now that I'm on the appropriate processor, stop + * all of the others, and disable their local APICs. */ + smp_send_stop(); #endif /* CONFIG_SMP */ @@ -339,7 +309,10 @@ void machine_restart(char * __unused) #ifdef CONFIG_X86_IO_APIC disable_IO_APIC(); #endif +} +void machine_emergency_restart(void) +{ if (!reboot_thru_bios) { if (efi_enabled) { efi.reset_system(EFI_RESET_COLD, EFI_SUCCESS, 0, NULL); @@ -362,23 +335,22 @@ void machine_restart(char * __unused) machine_real_restart(jump_to_bios, sizeof(jump_to_bios)); } -EXPORT_SYMBOL(machine_restart); +void machine_restart(char * __unused) +{ + machine_shutdown(); + machine_emergency_restart(); +} void machine_halt(void) { } -EXPORT_SYMBOL(machine_halt); - void machine_power_off(void) { - lapic_shutdown(); + machine_shutdown(); - if (efi_enabled) - efi.reset_system(EFI_RESET_SHUTDOWN, EFI_SUCCESS, 0, NULL); if (pm_power_off) pm_power_off(); } -EXPORT_SYMBOL(machine_power_off); diff --git a/arch/i386/kernel/relocate_kernel.S b/arch/i386/kernel/relocate_kernel.S new file mode 100644 index 000000000000..d312616effa1 --- /dev/null +++ b/arch/i386/kernel/relocate_kernel.S @@ -0,0 +1,120 @@ +/* + * relocate_kernel.S - put the kernel image in place to boot + * Copyright (C) 2002-2004 Eric Biederman <ebiederm@xmission.com> + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/linkage.h> + + /* + * Must be relocatable PIC code callable as a C function, that once + * it starts can not use the previous processes stack. + */ + .globl relocate_new_kernel +relocate_new_kernel: + /* read the arguments and say goodbye to the stack */ + movl 4(%esp), %ebx /* page_list */ + movl 8(%esp), %ebp /* reboot_code_buffer */ + movl 12(%esp), %edx /* start address */ + movl 16(%esp), %ecx /* cpu_has_pae */ + + /* zero out flags, and disable interrupts */ + pushl $0 + popfl + + /* set a new stack at the bottom of our page... */ + lea 4096(%ebp), %esp + + /* store the parameters back on the stack */ + pushl %edx /* store the start address */ + + /* Set cr0 to a known state: + * 31 0 == Paging disabled + * 18 0 == Alignment check disabled + * 16 0 == Write protect disabled + * 3 0 == No task switch + * 2 0 == Don't do FP software emulation. + * 0 1 == Proctected mode enabled + */ + movl %cr0, %eax + andl $~((1<<31)|(1<<18)|(1<<16)|(1<<3)|(1<<2)), %eax + orl $(1<<0), %eax + movl %eax, %cr0 + + /* clear cr4 if applicable */ + testl %ecx, %ecx + jz 1f + /* Set cr4 to a known state: + * Setting everything to zero seems safe. + */ + movl %cr4, %eax + andl $0, %eax + movl %eax, %cr4 + + jmp 1f +1: + + /* Flush the TLB (needed?) */ + xorl %eax, %eax + movl %eax, %cr3 + + /* Do the copies */ + movl %ebx, %ecx + jmp 1f + +0: /* top, read another word from the indirection page */ + movl (%ebx), %ecx + addl $4, %ebx +1: + testl $0x1, %ecx /* is it a destination page */ + jz 2f + movl %ecx, %edi + andl $0xfffff000, %edi + jmp 0b +2: + testl $0x2, %ecx /* is it an indirection page */ + jz 2f + movl %ecx, %ebx + andl $0xfffff000, %ebx + jmp 0b +2: + testl $0x4, %ecx /* is it the done indicator */ + jz 2f + jmp 3f +2: + testl $0x8, %ecx /* is it the source indicator */ + jz 0b /* Ignore it otherwise */ + movl %ecx, %esi /* For every source page do a copy */ + andl $0xfffff000, %esi + + movl $1024, %ecx + rep ; movsl + jmp 0b + +3: + + /* To be certain of avoiding problems with self-modifying code + * I need to execute a serializing instruction here. + * So I flush the TLB, it's handy, and not processor dependent. + */ + xorl %eax, %eax + movl %eax, %cr3 + + /* set all of the registers to known values */ + /* leave %esp alone */ + + xorl %eax, %eax + xorl %ebx, %ebx + xorl %ecx, %ecx + xorl %edx, %edx + xorl %esi, %esi + xorl %edi, %edi + xorl %ebp, %ebp + ret +relocate_new_kernel_end: + + .globl relocate_new_kernel_size +relocate_new_kernel_size: + .long relocate_new_kernel_end - relocate_new_kernel diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 2bfbddebdbf8..af4de58cab54 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -23,8 +23,10 @@ * This file handles the architecture-dependent parts of initialization */ +#include <linux/config.h> #include <linux/sched.h> #include <linux/mm.h> +#include <linux/mmzone.h> #include <linux/tty.h> #include <linux/ioport.h> #include <linux/acpi.h> @@ -41,7 +43,12 @@ #include <linux/init.h> #include <linux/edd.h> #include <linux/nodemask.h> +#include <linux/kexec.h> +#include <linux/crash_dump.h> + #include <video/edid.h> + +#include <asm/apic.h> #include <asm/e820.h> #include <asm/mpspec.h> #include <asm/setup.h> @@ -53,12 +60,15 @@ #include "setup_arch_pre.h" #include <bios_ebda.h> +/* Forward Declaration. */ +void __init find_max_pfn(void); + /* This value is set up by the early boot code to point to the value immediately after the boot time page tables. It contains a *physical* address, and must not be in the .bss segment! */ unsigned long init_pg_tables_end __initdata = ~0UL; -int disable_pse __initdata = 0; +int disable_pse __devinitdata = 0; /* * Machine setup.. @@ -73,6 +83,7 @@ EXPORT_SYMBOL(efi_enabled); struct cpuinfo_x86 new_cpu_data __initdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; /* common cpu data for all cpus */ struct cpuinfo_x86 boot_cpu_data = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; +EXPORT_SYMBOL(boot_cpu_data); unsigned long mmu_cr4_features; @@ -90,12 +101,18 @@ extern acpi_interrupt_flags acpi_sci_flags; /* for MCA, but anyone else can use it if they want */ unsigned int machine_id; +#ifdef CONFIG_MCA +EXPORT_SYMBOL(machine_id); +#endif unsigned int machine_submodel_id; unsigned int BIOS_revision; unsigned int mca_pentium_flag; /* For PCI or other memory-mapped resources */ unsigned long pci_mem_start = 0x10000000; +#ifdef CONFIG_PCI +EXPORT_SYMBOL(pci_mem_start); +#endif /* Boot loader ID as an integer, for the benefit of proc_dointvec */ int bootloader_type; @@ -107,14 +124,26 @@ static unsigned int highmem_pages = -1; * Setup options */ struct drive_info_struct { char dummy[32]; } drive_info; +#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) || \ + defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE) +EXPORT_SYMBOL(drive_info); +#endif struct screen_info screen_info; +#ifdef CONFIG_VT +EXPORT_SYMBOL(screen_info); +#endif struct apm_info apm_info; +EXPORT_SYMBOL(apm_info); struct sys_desc_table_struct { unsigned short length; unsigned char table[0]; }; struct edid_info edid_info; struct ist_info ist_info; +#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \ + defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE) +EXPORT_SYMBOL(ist_info); +#endif struct e820map e820; extern void early_cpu_init(void); @@ -711,6 +740,15 @@ static void __init parse_cmdline_early (char ** cmdline_p) if (to != command_line) to--; if (!memcmp(from+7, "exactmap", 8)) { +#ifdef CONFIG_CRASH_DUMP + /* If we are doing a crash dump, we + * still need to know the real mem + * size before original memory map is + * reset. + */ + find_max_pfn(); + saved_max_pfn = max_pfn; +#endif from += 8+7; e820.nr_map = 0; userdef = 1; @@ -814,6 +852,44 @@ static void __init parse_cmdline_early (char ** cmdline_p) #endif /* CONFIG_X86_LOCAL_APIC */ #endif /* CONFIG_ACPI_BOOT */ +#ifdef CONFIG_X86_LOCAL_APIC + /* enable local APIC */ + else if (!memcmp(from, "lapic", 5)) + lapic_enable(); + + /* disable local APIC */ + else if (!memcmp(from, "nolapic", 6)) + lapic_disable(); +#endif /* CONFIG_X86_LOCAL_APIC */ + +#ifdef CONFIG_KEXEC + /* crashkernel=size@addr specifies the location to reserve for + * a crash kernel. By reserving this memory we guarantee + * that linux never set's it up as a DMA target. + * Useful for holding code to do something appropriate + * after a kernel panic. + */ + else if (!memcmp(from, "crashkernel=", 12)) { + unsigned long size, base; + size = memparse(from+12, &from); + if (*from == '@') { + base = memparse(from+1, &from); + /* FIXME: Do I want a sanity check + * to validate the memory range? + */ + crashk_res.start = base; + crashk_res.end = base + size - 1; + } + } +#endif +#ifdef CONFIG_CRASH_DUMP + /* elfcorehdr= specifies the location of elf core header + * stored by the crashed kernel. + */ + else if (!memcmp(from, "elfcorehdr=", 11)) + elfcorehdr_addr = memparse(from+11, &from); +#endif + /* * highmem=size forces highmem to be exactly 'size' bytes. * This works even on boxes that have no highmem otherwise. @@ -1022,7 +1098,7 @@ static void __init reserve_ebda_region(void) reserve_bootmem(addr, PAGE_SIZE); } -#ifndef CONFIG_DISCONTIGMEM +#ifndef CONFIG_NEED_MULTIPLE_NODES void __init setup_bootmem_allocator(void); static unsigned long __init setup_memory(void) { @@ -1072,9 +1148,9 @@ void __init zone_sizes_init(void) free_area_init(zones_size); } #else -extern unsigned long setup_memory(void); +extern unsigned long __init setup_memory(void); extern void zone_sizes_init(void); -#endif /* !CONFIG_DISCONTIGMEM */ +#endif /* !CONFIG_NEED_MULTIPLE_NODES */ void __init setup_bootmem_allocator(void) { @@ -1092,8 +1168,8 @@ void __init setup_bootmem_allocator(void) * the (very unlikely) case of us accidentally initializing the * bootmem allocator with an invalid RAM area. */ - reserve_bootmem(HIGH_MEMORY, (PFN_PHYS(min_low_pfn) + - bootmap_size + PAGE_SIZE-1) - (HIGH_MEMORY)); + reserve_bootmem(__PHYSICAL_START, (PFN_PHYS(min_low_pfn) + + bootmap_size + PAGE_SIZE-1) - (__PHYSICAL_START)); /* * reserve physical page 0 - it's a special BIOS page on many boxes, @@ -1149,6 +1225,11 @@ void __init setup_bootmem_allocator(void) } } #endif +#ifdef CONFIG_KEXEC + if (crashk_res.start != crashk_res.end) + reserve_bootmem(crashk_res.start, + crashk_res.end - crashk_res.start + 1); +#endif } /* @@ -1202,6 +1283,9 @@ legacy_init_iomem_resources(struct resource *code_resource, struct resource *dat */ request_resource(res, code_resource); request_resource(res, data_resource); +#ifdef CONFIG_KEXEC + request_resource(res, &crashk_res); +#endif } } } @@ -1330,7 +1414,7 @@ static struct nop { This runs before SMP is initialized to avoid SMP problems with self modifying code. This implies that assymetric systems where APs have less capabilities than the boot processor are not handled. - In this case boot with "noreplacement". */ + Tough. Make sure you disable such features by hand. */ void apply_alternatives(void *start, void *end) { struct alt_instr *a; @@ -1358,24 +1442,12 @@ void apply_alternatives(void *start, void *end) } } -static int no_replacement __initdata = 0; - void __init alternative_instructions(void) { extern struct alt_instr __alt_instructions[], __alt_instructions_end[]; - if (no_replacement) - return; apply_alternatives(__alt_instructions, __alt_instructions_end); } -static int __init noreplacement_setup(char *s) -{ - no_replacement = 1; - return 0; -} - -__setup("noreplacement", noreplacement_setup); - static char * __init machine_specific_memory_setup(void); #ifdef CONFIG_MCA @@ -1475,6 +1547,7 @@ void __init setup_arch(char **cmdline_p) #endif paging_init(); remapped_pgdat_init(); + sparse_init(); zone_sizes_init(); /* diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c index ea46d028af08..89ef7adc63a4 100644 --- a/arch/i386/kernel/signal.c +++ b/arch/i386/kernel/signal.c @@ -346,8 +346,8 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size) extern void __user __kernel_sigreturn; extern void __user __kernel_rt_sigreturn; -static void setup_frame(int sig, struct k_sigaction *ka, - sigset_t *set, struct pt_regs * regs) +static int setup_frame(int sig, struct k_sigaction *ka, + sigset_t *set, struct pt_regs * regs) { void __user *restorer; struct sigframe __user *frame; @@ -429,13 +429,14 @@ static void setup_frame(int sig, struct k_sigaction *ka, current->comm, current->pid, frame, regs->eip, frame->pretcode); #endif - return; + return 1; give_sigsegv: force_sigsegv(sig, current); + return 0; } -static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, +static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct pt_regs * regs) { void __user *restorer; @@ -522,20 +523,23 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, current->comm, current->pid, frame, regs->eip, frame->pretcode); #endif - return; + return 1; give_sigsegv: force_sigsegv(sig, current); + return 0; } /* * OK, we're invoking a handler */ -static void +static int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs) { + int ret; + /* Are we from a system call? */ if (regs->orig_eax >= 0) { /* If so, check system call restarting.. */ @@ -569,17 +573,19 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, /* Set up the stack frame */ if (ka->sa.sa_flags & SA_SIGINFO) - setup_rt_frame(sig, ka, info, oldset, regs); + ret = setup_rt_frame(sig, ka, info, oldset, regs); else - setup_frame(sig, ka, oldset, regs); + ret = setup_frame(sig, ka, oldset, regs); - if (!(ka->sa.sa_flags & SA_NODEFER)) { + if (ret && !(ka->sa.sa_flags & SA_NODEFER)) { spin_lock_irq(¤t->sighand->siglock); sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); sigaddset(¤t->blocked,sig); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); } + + return ret; } /* @@ -599,13 +605,11 @@ int fastcall do_signal(struct pt_regs *regs, sigset_t *oldset) * kernel mode. Just return without doing anything * if so. */ - if ((regs->xcs & 3) != 3) + if (!user_mode(regs)) return 1; - if (current->flags & PF_FREEZE) { - refrigerator(0); + if (try_to_freeze()) goto no_signal; - } if (!oldset) oldset = ¤t->blocked; @@ -618,12 +622,11 @@ int fastcall do_signal(struct pt_regs *regs, sigset_t *oldset) * inside the kernel. */ if (unlikely(current->thread.debugreg[7])) { - loaddebug(¤t->thread, 7); + set_debugreg(current->thread.debugreg[7], 7); } /* Whee! Actually deliver the signal. */ - handle_signal(signr, &info, &ka, oldset, regs); - return 1; + return handle_signal(signr, &info, &ka, oldset, regs); } no_signal: diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c index 6223c33ac91c..cec4bde67161 100644 --- a/arch/i386/kernel/smp.c +++ b/arch/i386/kernel/smp.c @@ -19,6 +19,8 @@ #include <linux/mc146818rtc.h> #include <linux/cache.h> #include <linux/interrupt.h> +#include <linux/cpu.h> +#include <linux/module.h> #include <asm/mtrr.h> #include <asm/tlbflush.h> @@ -163,7 +165,7 @@ void send_IPI_mask_bitmask(cpumask_t cpumask, int vector) unsigned long flags; local_irq_save(flags); - + WARN_ON(mask & ~cpus_addr(cpu_online_map)[0]); /* * Wait for idle. */ @@ -345,21 +347,21 @@ out: static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, unsigned long va) { - cpumask_t tmp; /* * A couple of (to be removed) sanity checks: * - * - we do not send IPIs to not-yet booted CPUs. * - current CPU must not be in mask * - mask must exist :) */ BUG_ON(cpus_empty(cpumask)); - - cpus_and(tmp, cpumask, cpu_online_map); - BUG_ON(!cpus_equal(cpumask, tmp)); BUG_ON(cpu_isset(smp_processor_id(), cpumask)); BUG_ON(!mm); + /* If a CPU which we ran on has gone down, OK. */ + cpus_and(cpumask, cpumask, cpu_online_map); + if (cpus_empty(cpumask)) + return; + /* * i'm not happy about this global shared spinlock in the * MM hot path, but we'll see how contended it is. @@ -452,6 +454,7 @@ void flush_tlb_page(struct vm_area_struct * vma, unsigned long va) preempt_enable(); } +EXPORT_SYMBOL(flush_tlb_page); static void do_flush_tlb_all(void* info) { @@ -474,6 +477,7 @@ void flush_tlb_all(void) */ void smp_send_reschedule(int cpu) { + WARN_ON(cpu_is_offline(cpu)); send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR); } @@ -491,6 +495,16 @@ struct call_data_struct { int wait; }; +void lock_ipi_call_lock(void) +{ + spin_lock_irq(&call_lock); +} + +void unlock_ipi_call_lock(void) +{ + spin_unlock_irq(&call_lock); +} + static struct call_data_struct * call_data; /* @@ -514,10 +528,15 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, */ { struct call_data_struct data; - int cpus = num_online_cpus()-1; + int cpus; - if (!cpus) + /* Holding any lock stops cpus from going down. */ + spin_lock(&call_lock); + cpus = num_online_cpus() - 1; + if (!cpus) { + spin_unlock(&call_lock); return 0; + } /* Can deadlock when called with interrupts disabled */ WARN_ON(irqs_disabled()); @@ -529,7 +548,6 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, if (wait) atomic_set(&data.finished, 0); - spin_lock(&call_lock); call_data = &data; mb(); @@ -547,6 +565,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, return 0; } +EXPORT_SYMBOL(smp_call_function); static void stop_this_cpu (void * dummy) { diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index bc1bb6919e6a..8ac8e9fd5614 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -44,6 +44,9 @@ #include <linux/smp_lock.h> #include <linux/irq.h> #include <linux/bootmem.h> +#include <linux/notifier.h> +#include <linux/cpu.h> +#include <linux/percpu.h> #include <linux/delay.h> #include <linux/mc146818rtc.h> @@ -56,26 +59,48 @@ #include <smpboot_hooks.h> /* Set if we find a B stepping CPU */ -static int __initdata smp_b_stepping; +static int __devinitdata smp_b_stepping; /* Number of siblings per CPU package */ int smp_num_siblings = 1; -int phys_proc_id[NR_CPUS]; /* Package ID of each logical CPU */ +#ifdef CONFIG_X86_HT +EXPORT_SYMBOL(smp_num_siblings); +#endif + +/* Package ID of each logical CPU */ +int phys_proc_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; EXPORT_SYMBOL(phys_proc_id); -int cpu_core_id[NR_CPUS]; /* Core ID of each logical CPU */ + +/* Core ID of each logical CPU */ +int cpu_core_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; EXPORT_SYMBOL(cpu_core_id); +cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(cpu_sibling_map); + +cpumask_t cpu_core_map[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(cpu_core_map); + /* bitmap of online cpus */ -cpumask_t cpu_online_map; +cpumask_t cpu_online_map __read_mostly; +EXPORT_SYMBOL(cpu_online_map); cpumask_t cpu_callin_map; cpumask_t cpu_callout_map; +EXPORT_SYMBOL(cpu_callout_map); static cpumask_t smp_commenced_mask; +/* TSC's upper 32 bits can't be written in eariler CPU (before prescott), there + * is no way to resync one AP against BP. TBD: for prescott and above, we + * should use IA64's algorithm + */ +static int __devinitdata tsc_sync_disabled; + /* Per CPU bogomips and other parameters */ struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned; +EXPORT_SYMBOL(cpu_data); -u8 x86_cpu_to_apicid[NR_CPUS] = +u8 x86_cpu_to_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0xff }; EXPORT_SYMBOL(x86_cpu_to_apicid); @@ -90,13 +115,16 @@ static int trampoline_exec; static void map_cpu_to_logical_apicid(void); +/* State of each CPU. */ +DEFINE_PER_CPU(int, cpu_state) = { 0 }; + /* * Currently trivial. Write the real->protected mode * bootstrap into the page concerned. The caller * has made sure it's suitably aligned. */ -static unsigned long __init setup_trampoline(void) +static unsigned long __devinit setup_trampoline(void) { memcpy(trampoline_base, trampoline_data, trampoline_end - trampoline_data); return virt_to_phys(trampoline_base); @@ -126,7 +154,7 @@ void __init smp_alloc_memory(void) * a given CPU */ -static void __init smp_store_cpu_info(int id) +static void __devinit smp_store_cpu_info(int id) { struct cpuinfo_x86 *c = cpu_data + id; @@ -199,7 +227,7 @@ static void __init synchronize_tsc_bp (void) unsigned long long t0; unsigned long long sum, avg; long long delta; - unsigned long one_usec; + unsigned int one_usec; int buggy = 0; printk(KERN_INFO "checking TSC synchronization across %u CPUs: ", num_booting_cpus()); @@ -320,7 +348,7 @@ extern void calibrate_delay(void); static atomic_t init_deasserted; -static void __init smp_callin(void) +static void __devinit smp_callin(void) { int cpuid, phys_id; unsigned long timeout; @@ -405,16 +433,48 @@ static void __init smp_callin(void) /* * Synchronize the TSC with the BP */ - if (cpu_has_tsc && cpu_khz) + if (cpu_has_tsc && cpu_khz && !tsc_sync_disabled) synchronize_tsc_ap(); } static int cpucount; +static inline void +set_cpu_sibling_map(int cpu) +{ + int i; + + if (smp_num_siblings > 1) { + for (i = 0; i < NR_CPUS; i++) { + if (!cpu_isset(i, cpu_callout_map)) + continue; + if (cpu_core_id[cpu] == cpu_core_id[i]) { + cpu_set(i, cpu_sibling_map[cpu]); + cpu_set(cpu, cpu_sibling_map[i]); + } + } + } else { + cpu_set(cpu, cpu_sibling_map[cpu]); + } + + if (current_cpu_data.x86_num_cores > 1) { + for (i = 0; i < NR_CPUS; i++) { + if (!cpu_isset(i, cpu_callout_map)) + continue; + if (phys_proc_id[cpu] == phys_proc_id[i]) { + cpu_set(i, cpu_core_map[cpu]); + cpu_set(cpu, cpu_core_map[i]); + } + } + } else { + cpu_core_map[cpu] = cpu_sibling_map[cpu]; + } +} + /* * Activate a secondary processor. */ -static void __init start_secondary(void *unused) +static void __devinit start_secondary(void *unused) { /* * Dont put anything before smp_callin(), SMP @@ -437,7 +497,23 @@ static void __init start_secondary(void *unused) * the local TLBs too. */ local_flush_tlb(); + + /* This must be done before setting cpu_online_map */ + set_cpu_sibling_map(raw_smp_processor_id()); + wmb(); + + /* + * We need to hold call_lock, so there is no inconsistency + * between the time smp_call_function() determines number of + * IPI receipients, and the time when the determination is made + * for which cpus receive the IPI. Holding this + * lock helps us to not include this cpu in a currently in progress + * smp_call_function(). + */ + lock_ipi_call_lock(); cpu_set(smp_processor_id(), cpu_online_map); + unlock_ipi_call_lock(); + per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; /* We can take interrupts now: we're officially "up". */ local_irq_enable(); @@ -452,7 +528,7 @@ static void __init start_secondary(void *unused) * from the task structure * This function must not return. */ -void __init initialize_secondary(void) +void __devinit initialize_secondary(void) { /* * We don't actually need to load the full TSS, @@ -474,10 +550,10 @@ extern struct { #ifdef CONFIG_NUMA /* which logical CPUs are on which nodes */ -cpumask_t node_2_cpu_mask[MAX_NUMNODES] = +cpumask_t node_2_cpu_mask[MAX_NUMNODES] __read_mostly = { [0 ... MAX_NUMNODES-1] = CPU_MASK_NONE }; /* which node each logical CPU is on */ -int cpu_2_node[NR_CPUS] = { [0 ... NR_CPUS-1] = 0 }; +int cpu_2_node[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0 }; EXPORT_SYMBOL(cpu_2_node); /* set up a mapping between cpu and node. */ @@ -505,7 +581,7 @@ static inline void unmap_cpu_to_node(int cpu) #endif /* CONFIG_NUMA */ -u8 cpu_2_logical_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; +u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; static void map_cpu_to_logical_apicid(void) { @@ -566,7 +642,7 @@ static inline void __inquire_remote_apic(int apicid) * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this * won't ... remember to clear down the APIC, etc later. */ -static int __init +static int __devinit wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) { unsigned long send_status = 0, accept_status = 0; @@ -612,7 +688,7 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) #endif /* WAKE_SECONDARY_VIA_NMI */ #ifdef WAKE_SECONDARY_VIA_INIT -static int __init +static int __devinit wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) { unsigned long send_status = 0, accept_status = 0; @@ -747,8 +823,43 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) #endif /* WAKE_SECONDARY_VIA_INIT */ extern cpumask_t cpu_initialized; +static inline int alloc_cpu_id(void) +{ + cpumask_t tmp_map; + int cpu; + cpus_complement(tmp_map, cpu_present_map); + cpu = first_cpu(tmp_map); + if (cpu >= NR_CPUS) + return -ENODEV; + return cpu; +} + +#ifdef CONFIG_HOTPLUG_CPU +static struct task_struct * __devinitdata cpu_idle_tasks[NR_CPUS]; +static inline struct task_struct * alloc_idle_task(int cpu) +{ + struct task_struct *idle; + + if ((idle = cpu_idle_tasks[cpu]) != NULL) { + /* initialize thread_struct. we really want to avoid destroy + * idle tread + */ + idle->thread.esp = (unsigned long)(((struct pt_regs *) + (THREAD_SIZE + (unsigned long) idle->thread_info)) - 1); + init_idle(idle, cpu); + return idle; + } + idle = fork_idle(cpu); -static int __init do_boot_cpu(int apicid) + if (!IS_ERR(idle)) + cpu_idle_tasks[cpu] = idle; + return idle; +} +#else +#define alloc_idle_task(cpu) fork_idle(cpu) +#endif + +static int __devinit do_boot_cpu(int apicid, int cpu) /* * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad * (ie clustered apic addressing mode), this is a LOGICAL apic ID. @@ -757,16 +868,17 @@ static int __init do_boot_cpu(int apicid) { struct task_struct *idle; unsigned long boot_error; - int timeout, cpu; + int timeout; unsigned long start_eip; unsigned short nmi_high = 0, nmi_low = 0; - cpu = ++cpucount; + ++cpucount; + /* * We can't use kernel_thread since we must avoid to * reschedule the child. */ - idle = fork_idle(cpu); + idle = alloc_idle_task(cpu); if (IS_ERR(idle)) panic("failed fork for CPU %d", cpu); idle->thread.eip = (unsigned long) start_secondary; @@ -833,13 +945,16 @@ static int __init do_boot_cpu(int apicid) inquire_remote_apic(apicid); } } - x86_cpu_to_apicid[cpu] = apicid; + if (boot_error) { /* Try to put things back the way they were before ... */ unmap_cpu_to_logical_apicid(cpu); cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */ cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */ cpucount--; + } else { + x86_cpu_to_apicid[cpu] = apicid; + cpu_set(cpu, cpu_present_map); } /* mark "stuck" area as not stuck */ @@ -848,6 +963,75 @@ static int __init do_boot_cpu(int apicid) return boot_error; } +#ifdef CONFIG_HOTPLUG_CPU +void cpu_exit_clear(void) +{ + int cpu = raw_smp_processor_id(); + + idle_task_exit(); + + cpucount --; + cpu_uninit(); + irq_ctx_exit(cpu); + + cpu_clear(cpu, cpu_callout_map); + cpu_clear(cpu, cpu_callin_map); + cpu_clear(cpu, cpu_present_map); + + cpu_clear(cpu, smp_commenced_mask); + unmap_cpu_to_logical_apicid(cpu); +} + +struct warm_boot_cpu_info { + struct completion *complete; + int apicid; + int cpu; +}; + +static void __devinit do_warm_boot_cpu(void *p) +{ + struct warm_boot_cpu_info *info = p; + do_boot_cpu(info->apicid, info->cpu); + complete(info->complete); +} + +int __devinit smp_prepare_cpu(int cpu) +{ + DECLARE_COMPLETION(done); + struct warm_boot_cpu_info info; + struct work_struct task; + int apicid, ret; + + lock_cpu_hotplug(); + apicid = x86_cpu_to_apicid[cpu]; + if (apicid == BAD_APICID) { + ret = -ENODEV; + goto exit; + } + + info.complete = &done; + info.apicid = apicid; + info.cpu = cpu; + INIT_WORK(&task, do_warm_boot_cpu, &info); + + tsc_sync_disabled = 1; + + /* init low mem mapping */ + memcpy(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS, + sizeof(swapper_pg_dir[0]) * KERNEL_PGD_PTRS); + flush_tlb_all(); + schedule_work(&task); + wait_for_completion(&done); + + tsc_sync_disabled = 0; + zap_low_mappings(); + ret = 0; +exit: + unlock_cpu_hotplug(); + return ret; +} +#endif + static void smp_tune_scheduling (void) { unsigned long cachesize; /* kB */ @@ -885,10 +1069,9 @@ static void smp_tune_scheduling (void) static int boot_cpu_logical_apicid; /* Where the IO area was mapped on multiquad, always 0 otherwise */ void *xquad_portio; - -cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned; -cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned; -EXPORT_SYMBOL(cpu_core_map); +#ifdef CONFIG_X86_NUMAQ +EXPORT_SYMBOL(xquad_portio); +#endif static void __init smp_boot_cpus(unsigned int max_cpus) { @@ -1001,7 +1184,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus) if (max_cpus <= cpucount+1) continue; - if (do_boot_cpu(apicid)) + if (((cpu = alloc_cpu_id()) <= 0) || do_boot_cpu(apicid, cpu)) printk("CPU #%d not responding - cannot use it.\n", apicid); else @@ -1053,44 +1236,8 @@ static void __init smp_boot_cpus(unsigned int max_cpus) cpus_clear(cpu_core_map[cpu]); } - for (cpu = 0; cpu < NR_CPUS; cpu++) { - struct cpuinfo_x86 *c = cpu_data + cpu; - int siblings = 0; - int i; - if (!cpu_isset(cpu, cpu_callout_map)) - continue; - - if (smp_num_siblings > 1) { - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_isset(i, cpu_callout_map)) - continue; - if (cpu_core_id[cpu] == cpu_core_id[i]) { - siblings++; - cpu_set(i, cpu_sibling_map[cpu]); - } - } - } else { - siblings++; - cpu_set(cpu, cpu_sibling_map[cpu]); - } - - if (siblings != smp_num_siblings) { - printk(KERN_WARNING "WARNING: %d siblings found for CPU%d, should be %d\n", siblings, cpu, smp_num_siblings); - smp_num_siblings = siblings; - } - - if (c->x86_num_cores > 1) { - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_isset(i, cpu_callout_map)) - continue; - if (phys_proc_id[cpu] == phys_proc_id[i]) { - cpu_set(i, cpu_core_map[cpu]); - } - } - } else { - cpu_core_map[cpu] = cpu_sibling_map[cpu]; - } - } + cpu_set(0, cpu_sibling_map[0]); + cpu_set(0, cpu_core_map[0]); smpboot_setup_io_apic(); @@ -1107,6 +1254,9 @@ static void __init smp_boot_cpus(unsigned int max_cpus) who understands all this stuff should rewrite it properly. --RR 15/Jul/02 */ void __init smp_prepare_cpus(unsigned int max_cpus) { + smp_commenced_mask = cpumask_of_cpu(0); + cpu_callin_map = cpumask_of_cpu(0); + mb(); smp_boot_cpus(max_cpus); } @@ -1114,23 +1264,98 @@ void __devinit smp_prepare_boot_cpu(void) { cpu_set(smp_processor_id(), cpu_online_map); cpu_set(smp_processor_id(), cpu_callout_map); + cpu_set(smp_processor_id(), cpu_present_map); + per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; } -int __devinit __cpu_up(unsigned int cpu) +#ifdef CONFIG_HOTPLUG_CPU +static void +remove_siblinginfo(int cpu) { - /* This only works at boot for x86. See "rewrite" above. */ - if (cpu_isset(cpu, smp_commenced_mask)) { - local_irq_enable(); - return -ENOSYS; + int sibling; + + for_each_cpu_mask(sibling, cpu_sibling_map[cpu]) + cpu_clear(cpu, cpu_sibling_map[sibling]); + for_each_cpu_mask(sibling, cpu_core_map[cpu]) + cpu_clear(cpu, cpu_core_map[sibling]); + cpus_clear(cpu_sibling_map[cpu]); + cpus_clear(cpu_core_map[cpu]); + phys_proc_id[cpu] = BAD_APICID; + cpu_core_id[cpu] = BAD_APICID; +} + +int __cpu_disable(void) +{ + cpumask_t map = cpu_online_map; + int cpu = smp_processor_id(); + + /* + * Perhaps use cpufreq to drop frequency, but that could go + * into generic code. + * + * We won't take down the boot processor on i386 due to some + * interrupts only being able to be serviced by the BSP. + * Especially so if we're not using an IOAPIC -zwane + */ + if (cpu == 0) + return -EBUSY; + + /* We enable the timer again on the exit path of the death loop */ + disable_APIC_timer(); + /* Allow any queued timer interrupts to get serviced */ + local_irq_enable(); + mdelay(1); + local_irq_disable(); + + remove_siblinginfo(cpu); + + cpu_clear(cpu, map); + fixup_irqs(map); + /* It's now safe to remove this processor from the online map */ + cpu_clear(cpu, cpu_online_map); + return 0; +} + +void __cpu_die(unsigned int cpu) +{ + /* We don't do anything here: idle task is faking death itself. */ + unsigned int i; + + for (i = 0; i < 10; i++) { + /* They ack this in play_dead by setting CPU_DEAD */ + if (per_cpu(cpu_state, cpu) == CPU_DEAD) { + printk ("CPU %d is now offline\n", cpu); + return; + } + current->state = TASK_UNINTERRUPTIBLE; + schedule_timeout(HZ/10); } + printk(KERN_ERR "CPU %u didn't die...\n", cpu); +} +#else /* ... !CONFIG_HOTPLUG_CPU */ +int __cpu_disable(void) +{ + return -ENOSYS; +} +void __cpu_die(unsigned int cpu) +{ + /* We said "no" in __cpu_disable */ + BUG(); +} +#endif /* CONFIG_HOTPLUG_CPU */ + +int __devinit __cpu_up(unsigned int cpu) +{ /* In case one didn't come up */ if (!cpu_isset(cpu, cpu_callin_map)) { + printk(KERN_DEBUG "skipping cpu%d, didn't come online\n", cpu); local_irq_enable(); return -EIO; } local_irq_enable(); + per_cpu(cpu_state, cpu) = CPU_UP_PREPARE; /* Unleash the CPU! */ cpu_set(cpu, smp_commenced_mask); while (!cpu_isset(cpu, cpu_online_map)) @@ -1144,10 +1369,12 @@ void __init smp_cpus_done(unsigned int max_cpus) setup_ioapic_dest(); #endif zap_low_mappings(); +#ifndef CONFIG_HOTPLUG_CPU /* * Disable executability of the SMP trampoline: */ set_kernel_exec((unsigned long)trampoline_base, trampoline_exec); +#endif } void __init smp_intr_init(void) diff --git a/arch/i386/kernel/syscall_table.S b/arch/i386/kernel/syscall_table.S index d408afaf6495..9b21a31d4f4e 100644 --- a/arch/i386/kernel/syscall_table.S +++ b/arch/i386/kernel/syscall_table.S @@ -251,7 +251,7 @@ ENTRY(sys_call_table) .long sys_io_submit .long sys_io_cancel .long sys_fadvise64 /* 250 */ - .long sys_set_zone_reclaim + .long sys_ni_syscall .long sys_exit_group .long sys_lookup_dcookie .long sys_epoll_create @@ -283,9 +283,14 @@ ENTRY(sys_call_table) .long sys_mq_timedreceive /* 280 */ .long sys_mq_notify .long sys_mq_getsetattr - .long sys_ni_syscall /* reserved for kexec */ + .long sys_kexec_load .long sys_waitid .long sys_ni_syscall /* 285 */ /* available */ .long sys_add_key .long sys_request_key .long sys_keyctl + .long sys_ioprio_set + .long sys_ioprio_get /* 290 */ + .long sys_inotify_init + .long sys_inotify_add_watch + .long sys_inotify_rm_watch diff --git a/arch/i386/kernel/sysenter.c b/arch/i386/kernel/sysenter.c index 960d8bd137d0..0bada1870bdf 100644 --- a/arch/i386/kernel/sysenter.c +++ b/arch/i386/kernel/sysenter.c @@ -21,11 +21,16 @@ extern asmlinkage void sysenter_entry(void); -void enable_sep_cpu(void *info) +void enable_sep_cpu(void) { int cpu = get_cpu(); struct tss_struct *tss = &per_cpu(init_tss, cpu); + if (!boot_cpu_has(X86_FEATURE_SEP)) { + put_cpu(); + return; + } + tss->ss1 = __KERNEL_CS; tss->esp1 = sizeof(struct tss_struct) + (unsigned long) tss; wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0); @@ -41,7 +46,7 @@ void enable_sep_cpu(void *info) extern const char vsyscall_int80_start, vsyscall_int80_end; extern const char vsyscall_sysenter_start, vsyscall_sysenter_end; -static int __init sysenter_setup(void) +int __init sysenter_setup(void) { void *page = (void *)get_zeroed_page(GFP_ATOMIC); @@ -58,8 +63,5 @@ static int __init sysenter_setup(void) &vsyscall_sysenter_start, &vsyscall_sysenter_end - &vsyscall_sysenter_start); - on_each_cpu(enable_sep_cpu, NULL, 1, 1); return 0; } - -__initcall(sysenter_setup); diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index a0dcb7c87c30..0ee9dee8af06 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -68,7 +68,8 @@ #include "io_ports.h" -extern spinlock_t i8259A_lock; +#include <asm/i8259.h> + int pit_latch_buggy; /* extern */ #include "do_timer.h" @@ -77,16 +78,20 @@ u64 jiffies_64 = INITIAL_JIFFIES; EXPORT_SYMBOL(jiffies_64); -unsigned long cpu_khz; /* Detected as we calibrate the TSC */ +unsigned int cpu_khz; /* Detected as we calibrate the TSC */ +EXPORT_SYMBOL(cpu_khz); extern unsigned long wall_jiffies; DEFINE_SPINLOCK(rtc_lock); +EXPORT_SYMBOL(rtc_lock); + +#include <asm/i8253.h> DEFINE_SPINLOCK(i8253_lock); EXPORT_SYMBOL(i8253_lock); -struct timer_opts *cur_timer = &timer_none; +struct timer_opts *cur_timer __read_mostly = &timer_none; /* * This is a special lock that is owned by the CPU and holds the index @@ -324,6 +329,8 @@ unsigned long get_cmos_time(void) return retval; } +EXPORT_SYMBOL(get_cmos_time); + static void sync_cmos_clock(unsigned long dummy); static struct timer_list sync_cmos_timer = diff --git a/arch/i386/kernel/time_hpet.c b/arch/i386/kernel/time_hpet.c index 10a0cbb88e75..658c0629ba6a 100644 --- a/arch/i386/kernel/time_hpet.c +++ b/arch/i386/kernel/time_hpet.c @@ -50,7 +50,7 @@ static void hpet_writel(unsigned long d, unsigned long a) * comparator value and continue. Next tick can be caught by checking * for a change in the comparator value. Used in apic.c. */ -static void __init wait_hpet_tick(void) +static void __devinit wait_hpet_tick(void) { unsigned int start_cmp_val, end_cmp_val; diff --git a/arch/i386/kernel/timers/common.c b/arch/i386/kernel/timers/common.c index 8e201219f525..8163fe0cf1f0 100644 --- a/arch/i386/kernel/timers/common.c +++ b/arch/i386/kernel/timers/common.c @@ -86,7 +86,7 @@ bad_ctc: #define CALIBRATE_CNT_HPET (5 * hpet_tick) #define CALIBRATE_TIME_HPET (5 * KERNEL_TICK_USEC) -unsigned long __init calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr) +unsigned long __devinit calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr) { unsigned long tsc_startlow, tsc_starthigh; unsigned long tsc_endlow, tsc_endhigh; @@ -139,6 +139,15 @@ bad_calibration: } #endif + +unsigned long read_timer_tsc(void) +{ + unsigned long retval; + rdtscl(retval); + return retval; +} + + /* calculate cpu_khz */ void init_cpu_khz(void) { @@ -154,7 +163,8 @@ void init_cpu_khz(void) :"=a" (cpu_khz), "=d" (edx) :"r" (tsc_quotient), "0" (eax), "1" (edx)); - printk("Detected %lu.%03lu MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000); + printk("Detected %u.%03u MHz processor.\n", + cpu_khz / 1000, cpu_khz % 1000); } } } diff --git a/arch/i386/kernel/timers/timer.c b/arch/i386/kernel/timers/timer.c index a3d6a288088b..7e39ed8e33f8 100644 --- a/arch/i386/kernel/timers/timer.c +++ b/arch/i386/kernel/timers/timer.c @@ -64,3 +64,12 @@ struct timer_opts* __init select_timer(void) panic("select_timer: Cannot find a suitable timer\n"); return NULL; } + +int read_current_timer(unsigned long *timer_val) +{ + if (cur_timer->read_timer) { + *timer_val = cur_timer->read_timer(); + return 0; + } + return -1; +} diff --git a/arch/i386/kernel/timers/timer_cyclone.c b/arch/i386/kernel/timers/timer_cyclone.c index f6f1206a11bb..13892a65c941 100644 --- a/arch/i386/kernel/timers/timer_cyclone.c +++ b/arch/i386/kernel/timers/timer_cyclone.c @@ -17,9 +17,9 @@ #include <asm/io.h> #include <asm/pgtable.h> #include <asm/fixmap.h> -#include "io_ports.h" +#include <asm/i8253.h> -extern spinlock_t i8253_lock; +#include "io_ports.h" /* Number of usecs that the last interrupt was delayed */ static int delay_at_last_interrupt; diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c index f778f471a09a..ef8dac5dd33b 100644 --- a/arch/i386/kernel/timers/timer_hpet.c +++ b/arch/i386/kernel/timers/timer_hpet.c @@ -18,7 +18,7 @@ #include "mach_timer.h" #include <asm/hpet.h> -static unsigned long hpet_usec_quotient; /* convert hpet clks to usec */ +static unsigned long __read_mostly hpet_usec_quotient; /* convert hpet clks to usec */ static unsigned long tsc_hpet_quotient; /* convert tsc to hpet clks */ static unsigned long hpet_last; /* hpet counter value at last tick*/ static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */ @@ -158,7 +158,7 @@ static int __init init_hpet(char* override) { unsigned long eax=0, edx=1000; ASM_DIV64_REG(cpu_khz, edx, tsc_quotient, eax, edx); - printk("Detected %lu.%03lu MHz processor.\n", + printk("Detected %u.%03u MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000); } set_cyc2ns_scale(cpu_khz/1000); @@ -180,12 +180,13 @@ static int __init init_hpet(char* override) /************************************************************/ /* tsc timer_opts struct */ -static struct timer_opts timer_hpet = { +static struct timer_opts timer_hpet __read_mostly = { .name = "hpet", .mark_offset = mark_offset_hpet, .get_offset = get_offset_hpet, .monotonic_clock = monotonic_clock_hpet, .delay = delay_hpet, + .read_timer = read_timer_tsc, }; struct init_timer_opts __initdata timer_hpet_init = { diff --git a/arch/i386/kernel/timers/timer_pit.c b/arch/i386/kernel/timers/timer_pit.c index 967d5453cd0e..06de036a820c 100644 --- a/arch/i386/kernel/timers/timer_pit.c +++ b/arch/i386/kernel/timers/timer_pit.c @@ -15,9 +15,8 @@ #include <asm/smp.h> #include <asm/io.h> #include <asm/arch_hooks.h> +#include <asm/i8253.h> -extern spinlock_t i8259A_lock; -extern spinlock_t i8253_lock; #include "do_timer.h" #include "io_ports.h" @@ -166,7 +165,6 @@ struct init_timer_opts __initdata timer_pit_init = { void setup_pit_timer(void) { - extern spinlock_t i8253_lock; unsigned long flags; spin_lock_irqsave(&i8253_lock, flags); diff --git a/arch/i386/kernel/timers/timer_pm.c b/arch/i386/kernel/timers/timer_pm.c index d77f22030fe6..4ef20e663498 100644 --- a/arch/i386/kernel/timers/timer_pm.c +++ b/arch/i386/kernel/timers/timer_pm.c @@ -246,6 +246,7 @@ static struct timer_opts timer_pmtmr = { .get_offset = get_offset_pmtmr, .monotonic_clock = monotonic_clock_pmtmr, .delay = delay_pmtmr, + .read_timer = read_timer_tsc, }; struct init_timer_opts __initdata timer_pmtmr_init = { diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c index 180444d87824..8f4e4d5bc560 100644 --- a/arch/i386/kernel/timers/timer_tsc.c +++ b/arch/i386/kernel/timers/timer_tsc.c @@ -24,6 +24,7 @@ #include "mach_timer.h" #include <asm/hpet.h> +#include <asm/i8253.h> #ifdef CONFIG_HPET_TIMER static unsigned long hpet_usec_quotient; @@ -33,9 +34,7 @@ static struct timer_opts timer_tsc; static inline void cpufreq_delayed_get(void); -int tsc_disable __initdata = 0; - -extern spinlock_t i8253_lock; +int tsc_disable __devinitdata = 0; static int use_tsc; /* Number of usecs that the last interrupt was delayed */ @@ -256,7 +255,7 @@ static unsigned long loops_per_jiffy_ref = 0; #ifndef CONFIG_SMP static unsigned long fast_gettimeoffset_ref = 0; -static unsigned long cpu_khz_ref = 0; +static unsigned int cpu_khz_ref = 0; #endif static int @@ -323,7 +322,7 @@ static inline void cpufreq_delayed_get(void) { return; } int recalibrate_cpu_khz(void) { #ifndef CONFIG_SMP - unsigned long cpu_khz_old = cpu_khz; + unsigned int cpu_khz_old = cpu_khz; if (cpu_has_tsc) { init_cpu_khz(); @@ -534,7 +533,8 @@ static int __init init_tsc(char* override) :"=a" (cpu_khz), "=d" (edx) :"r" (tsc_quotient), "0" (eax), "1" (edx)); - printk("Detected %lu.%03lu MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000); + printk("Detected %u.%03u MHz processor.\n", + cpu_khz / 1000, cpu_khz % 1000); } set_cyc2ns_scale(cpu_khz/1000); return 0; @@ -572,6 +572,7 @@ static struct timer_opts timer_tsc = { .get_offset = get_offset_tsc, .monotonic_clock = monotonic_clock_tsc, .delay = delay_tsc, + .read_timer = read_timer_tsc, }; struct init_timer_opts __initdata timer_tsc_init = { diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 83c579e82a81..a61f33d06ea3 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -27,6 +27,7 @@ #include <linux/ptrace.h> #include <linux/utsname.h> #include <linux/kprobes.h> +#include <linux/kexec.h> #ifdef CONFIG_EISA #include <linux/ioport.h> @@ -104,6 +105,7 @@ int register_die_notifier(struct notifier_block *nb) spin_unlock_irqrestore(&die_notifier_lock, flags); return err; } +EXPORT_SYMBOL(register_die_notifier); static inline int valid_stack_ptr(struct thread_info *tinfo, void *p) { @@ -209,7 +211,7 @@ void show_registers(struct pt_regs *regs) esp = (unsigned long) (®s->esp); ss = __KERNEL_DS; - if (regs->xcs & 3) { + if (user_mode(regs)) { in_kernel = 0; esp = regs->esp; ss = regs->xss & 0xffff; @@ -233,22 +235,22 @@ void show_registers(struct pt_regs *regs) * time of the fault.. */ if (in_kernel) { - u8 *eip; + u8 __user *eip; printk("\nStack: "); show_stack(NULL, (unsigned long*)esp); printk("Code: "); - eip = (u8 *)regs->eip - 43; + eip = (u8 __user *)regs->eip - 43; for (i = 0; i < 64; i++, eip++) { unsigned char c; - if (eip < (u8 *)PAGE_OFFSET || __get_user(c, eip)) { + if (eip < (u8 __user *)PAGE_OFFSET || __get_user(c, eip)) { printk(" Bad EIP value."); break; } - if (eip == (u8 *)regs->eip) + if (eip == (u8 __user *)regs->eip) printk("<%02x> ", c); else printk("%02x ", c); @@ -265,20 +267,20 @@ static void handle_BUG(struct pt_regs *regs) char c; unsigned long eip; - if (regs->xcs & 3) + if (user_mode(regs)) goto no_bug; /* Not in kernel */ eip = regs->eip; if (eip < PAGE_OFFSET) goto no_bug; - if (__get_user(ud2, (unsigned short *)eip)) + if (__get_user(ud2, (unsigned short __user *)eip)) goto no_bug; if (ud2 != 0x0b0f) goto no_bug; - if (__get_user(line, (unsigned short *)(eip + 2))) + if (__get_user(line, (unsigned short __user *)(eip + 2))) goto bug; - if (__get_user(file, (char **)(eip + 4)) || + if (__get_user(file, (char * __user *)(eip + 4)) || (unsigned long)file < PAGE_OFFSET || __get_user(c, file)) file = "<bad filename>"; @@ -293,6 +295,9 @@ bug: printk("Kernel BUG\n"); } +/* This is gone through when something in the kernel + * has done something bad and is about to be terminated. +*/ void die(const char * str, struct pt_regs * regs, long err) { static struct { @@ -340,6 +345,10 @@ void die(const char * str, struct pt_regs * regs, long err) bust_spinlocks(0); die.lock_owner = -1; spin_unlock_irq(&die.lock); + + if (kexec_should_crash(current)) + crash_kexec(regs); + if (in_interrupt()) panic("Fatal exception in interrupt"); @@ -353,26 +362,27 @@ void die(const char * str, struct pt_regs * regs, long err) static inline void die_if_kernel(const char * str, struct pt_regs * regs, long err) { - if (!(regs->eflags & VM_MASK) && !(3 & regs->xcs)) + if (!user_mode_vm(regs)) die(str, regs, err); } static void do_trap(int trapnr, int signr, char *str, int vm86, struct pt_regs * regs, long error_code, siginfo_t *info) { + struct task_struct *tsk = current; + tsk->thread.error_code = error_code; + tsk->thread.trap_no = trapnr; + if (regs->eflags & VM_MASK) { if (vm86) goto vm86_trap; goto trap_signal; } - if (!(regs->xcs & 3)) + if (!user_mode(regs)) goto kernel_trap; trap_signal: { - struct task_struct *tsk = current; - tsk->thread.error_code = error_code; - tsk->thread.trap_no = trapnr; if (info) force_sig_info(signr, info, tsk); else @@ -485,10 +495,13 @@ fastcall void do_general_protection(struct pt_regs * regs, long error_code) } put_cpu(); + current->thread.error_code = error_code; + current->thread.trap_no = 13; + if (regs->eflags & VM_MASK) goto gp_in_vm86; - if (!(regs->xcs & 3)) + if (!user_mode(regs)) goto gp_in_kernel; current->thread.error_code = error_code; @@ -569,6 +582,15 @@ void die_nmi (struct pt_regs *regs, const char *msg) console_silent(); spin_unlock(&nmi_print_lock); bust_spinlocks(0); + + /* If we are in kernel we are probably nested up pretty bad + * and might aswell get out now while we still can. + */ + if (!user_mode(regs)) { + current->thread.trap_no = 2; + crash_kexec(regs); + } + do_exit(SIGSEGV); } @@ -624,6 +646,14 @@ fastcall void do_nmi(struct pt_regs * regs, long error_code) nmi_enter(); cpu = smp_processor_id(); + +#ifdef CONFIG_HOTPLUG_CPU + if (!cpu_online(cpu)) { + nmi_exit(); + return; + } +#endif + ++nmi_count(cpu); if (!nmi_callback(regs, cpu)) @@ -636,11 +666,13 @@ void set_nmi_callback(nmi_callback_t callback) { nmi_callback = callback; } +EXPORT_SYMBOL_GPL(set_nmi_callback); void unset_nmi_callback(void) { nmi_callback = dummy_nmi_callback; } +EXPORT_SYMBOL_GPL(unset_nmi_callback); #ifdef CONFIG_KPROBES fastcall void do_int3(struct pt_regs *regs, long error_code) @@ -682,7 +714,7 @@ fastcall void do_debug(struct pt_regs * regs, long error_code) unsigned int condition; struct task_struct *tsk = current; - __asm__ __volatile__("movl %%db6,%0" : "=r" (condition)); + get_debugreg(condition, 6); if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code, SIGTRAP) == NOTIFY_STOP) @@ -713,7 +745,7 @@ fastcall void do_debug(struct pt_regs * regs, long error_code) * check for kernel mode by just checking the CPL * of CS. */ - if ((regs->xcs & 3) == 0) + if (!user_mode(regs)) goto clear_TF_reenable; } @@ -724,9 +756,7 @@ fastcall void do_debug(struct pt_regs * regs, long error_code) * the signal is delivered. */ clear_dr7: - __asm__("movl %0,%%db7" - : /* no output */ - : "r" (0)); + set_debugreg(0, 7); return; debug_vm86: @@ -871,9 +901,9 @@ fastcall void do_simd_coprocessor_error(struct pt_regs * regs, error_code); return; } - die_if_kernel("cache flush denied", regs, error_code); current->thread.trap_no = 19; current->thread.error_code = error_code; + die_if_kernel("cache flush denied", regs, error_code); force_sig(SIGSEGV, current); } } diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S index e0512cc8bea7..761972f8cb6c 100644 --- a/arch/i386/kernel/vmlinux.lds.S +++ b/arch/i386/kernel/vmlinux.lds.S @@ -2,20 +2,23 @@ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>; */ +#define LOAD_OFFSET __PAGE_OFFSET + #include <asm-generic/vmlinux.lds.h> #include <asm/thread_info.h> #include <asm/page.h> OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") OUTPUT_ARCH(i386) -ENTRY(startup_32) +ENTRY(phys_startup_32) jiffies = jiffies_64; SECTIONS { - . = __PAGE_OFFSET + 0x100000; + . = __KERNEL_START; + phys_startup_32 = startup_32 - LOAD_OFFSET; /* read-only */ _text = .; /* Text and read-only data */ - .text : { + .text : AT(ADDR(.text) - LOAD_OFFSET) { *(.text) SCHED_TEXT LOCK_TEXT @@ -27,49 +30,58 @@ SECTIONS . = ALIGN(16); /* Exception table */ __start___ex_table = .; - __ex_table : { *(__ex_table) } + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { *(__ex_table) } __stop___ex_table = .; RODATA /* writeable */ - .data : { /* Data */ + .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */ *(.data) CONSTRUCTORS } . = ALIGN(4096); __nosave_begin = .; - .data_nosave : { *(.data.nosave) } + .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data.nosave) } . = ALIGN(4096); __nosave_end = .; . = ALIGN(4096); - .data.page_aligned : { *(.data.idt) } + .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { + *(.data.idt) + } . = ALIGN(32); - .data.cacheline_aligned : { *(.data.cacheline_aligned) } + .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { + *(.data.cacheline_aligned) + } + /* rarely changed data like cpu maps */ + . = ALIGN(32); + .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { *(.data.read_mostly) } _edata = .; /* End of data section */ . = ALIGN(THREAD_SIZE); /* init_task */ - .data.init_task : { *(.data.init_task) } + .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { + *(.data.init_task) + } /* will be freed after init */ . = ALIGN(4096); /* Init code and data */ __init_begin = .; - .init.text : { + .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { _sinittext = .; *(.init.text) _einittext = .; } - .init.data : { *(.init.data) } + .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { *(.init.data) } . = ALIGN(16); __setup_start = .; - .init.setup : { *(.init.setup) } + .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { *(.init.setup) } __setup_end = .; __initcall_start = .; - .initcall.init : { + .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { *(.initcall1.init) *(.initcall2.init) *(.initcall3.init) @@ -80,33 +92,41 @@ SECTIONS } __initcall_end = .; __con_initcall_start = .; - .con_initcall.init : { *(.con_initcall.init) } + .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { + *(.con_initcall.init) + } __con_initcall_end = .; SECURITY_INIT . = ALIGN(4); __alt_instructions = .; - .altinstructions : { *(.altinstructions) } + .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { + *(.altinstructions) + } __alt_instructions_end = .; - .altinstr_replacement : { *(.altinstr_replacement) } + .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { + *(.altinstr_replacement) + } /* .exit.text is discard at runtime, not link time, to deal with references from .altinstructions and .eh_frame */ - .exit.text : { *(.exit.text) } - .exit.data : { *(.exit.data) } + .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { *(.exit.text) } + .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { *(.exit.data) } . = ALIGN(4096); __initramfs_start = .; - .init.ramfs : { *(.init.ramfs) } + .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) } __initramfs_end = .; . = ALIGN(32); __per_cpu_start = .; - .data.percpu : { *(.data.percpu) } + .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { *(.data.percpu) } __per_cpu_end = .; . = ALIGN(4096); __init_end = .; /* freed after init ends here */ __bss_start = .; /* BSS */ - .bss : { + .bss.page_aligned : AT(ADDR(.bss.page_aligned) - LOAD_OFFSET) { *(.bss.page_aligned) + } + .bss : AT(ADDR(.bss) - LOAD_OFFSET) { *(.bss) } . = ALIGN(4); diff --git a/arch/i386/lib/dec_and_lock.c b/arch/i386/lib/dec_and_lock.c index ab43394dc775..8b81b2524fa6 100644 --- a/arch/i386/lib/dec_and_lock.c +++ b/arch/i386/lib/dec_and_lock.c @@ -8,6 +8,7 @@ */ #include <linux/spinlock.h> +#include <linux/module.h> #include <asm/atomic.h> int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock) @@ -38,3 +39,4 @@ slow_path: spin_unlock(lock); return 0; } +EXPORT_SYMBOL(_atomic_dec_and_lock); diff --git a/arch/i386/lib/delay.c b/arch/i386/lib/delay.c index eb0cdfe9280f..c49a6acbee56 100644 --- a/arch/i386/lib/delay.c +++ b/arch/i386/lib/delay.c @@ -13,6 +13,7 @@ #include <linux/config.h> #include <linux/sched.h> #include <linux/delay.h> +#include <linux/module.h> #include <asm/processor.h> #include <asm/delay.h> #include <asm/timer.h> @@ -47,3 +48,8 @@ void __ndelay(unsigned long nsecs) { __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */ } + +EXPORT_SYMBOL(__delay); +EXPORT_SYMBOL(__const_udelay); +EXPORT_SYMBOL(__udelay); +EXPORT_SYMBOL(__ndelay); diff --git a/arch/i386/lib/mmx.c b/arch/i386/lib/mmx.c index 01f8b1a2cc84..2afda94dffd3 100644 --- a/arch/i386/lib/mmx.c +++ b/arch/i386/lib/mmx.c @@ -3,6 +3,7 @@ #include <linux/string.h> #include <linux/sched.h> #include <linux/hardirq.h> +#include <linux/module.h> #include <asm/i387.h> @@ -397,3 +398,7 @@ void mmx_copy_page(void *to, void *from) else fast_copy_page(to, from); } + +EXPORT_SYMBOL(_mmx_memcpy); +EXPORT_SYMBOL(mmx_clear_page); +EXPORT_SYMBOL(mmx_copy_page); diff --git a/arch/i386/lib/usercopy.c b/arch/i386/lib/usercopy.c index 51aa2bbb0269..4cf981d70f45 100644 --- a/arch/i386/lib/usercopy.c +++ b/arch/i386/lib/usercopy.c @@ -84,6 +84,7 @@ __strncpy_from_user(char *dst, const char __user *src, long count) __do_strncpy_from_user(dst, src, count, res); return res; } +EXPORT_SYMBOL(__strncpy_from_user); /** * strncpy_from_user: - Copy a NUL terminated string from userspace. @@ -111,7 +112,7 @@ strncpy_from_user(char *dst, const char __user *src, long count) __do_strncpy_from_user(dst, src, count, res); return res; } - +EXPORT_SYMBOL(strncpy_from_user); /* * Zero Userspace @@ -157,6 +158,7 @@ clear_user(void __user *to, unsigned long n) __do_clear_user(to, n); return n; } +EXPORT_SYMBOL(clear_user); /** * __clear_user: - Zero a block of memory in user space, with less checking. @@ -175,6 +177,7 @@ __clear_user(void __user *to, unsigned long n) __do_clear_user(to, n); return n; } +EXPORT_SYMBOL(__clear_user); /** * strlen_user: - Get the size of a string in user space. @@ -218,6 +221,7 @@ long strnlen_user(const char __user *s, long n) :"cc"); return res & mask; } +EXPORT_SYMBOL(strnlen_user); #ifdef CONFIG_X86_INTEL_USERCOPY static unsigned long @@ -570,6 +574,7 @@ survive: n = __copy_user_intel(to, from, n); return n; } +EXPORT_SYMBOL(__copy_to_user_ll); unsigned long __copy_from_user_ll(void *to, const void __user *from, unsigned long n) @@ -581,6 +586,7 @@ __copy_from_user_ll(void *to, const void __user *from, unsigned long n) n = __copy_user_zeroing_intel(to, from, n); return n; } +EXPORT_SYMBOL(__copy_from_user_ll); /** * copy_to_user: - Copy a block of data into user space. diff --git a/arch/i386/mach-default/setup.c b/arch/i386/mach-default/setup.c index 0aa08eaa8932..e5a1a83d09ef 100644 --- a/arch/i386/mach-default/setup.c +++ b/arch/i386/mach-default/setup.c @@ -10,6 +10,14 @@ #include <asm/acpi.h> #include <asm/arch_hooks.h> +#ifdef CONFIG_HOTPLUG_CPU +#define DEFAULT_SEND_IPI (1) +#else +#define DEFAULT_SEND_IPI (0) +#endif + +int no_broadcast=DEFAULT_SEND_IPI; + /** * pre_intr_init_hook - initialisation prior to setting up interrupt vectors * @@ -104,3 +112,22 @@ void __init mca_nmi_hook(void) printk("NMI generated from unknown source!\n"); } #endif + +static __init int no_ipi_broadcast(char *str) +{ + get_option(&str, &no_broadcast); + printk ("Using %s mode\n", no_broadcast ? "No IPI Broadcast" : + "IPI Broadcast"); + return 1; +} + +__setup("no_ipi_broadcast", no_ipi_broadcast); + +static int __init print_ipi_mode(void) +{ + printk ("Using IPI %s mode\n", no_broadcast ? "No-Shortcut" : + "Shortcut"); + return 0; +} + +late_initcall(print_ipi_mode); diff --git a/arch/i386/mach-default/topology.c b/arch/i386/mach-default/topology.c index 5b3e8817dae8..23395fff35d1 100644 --- a/arch/i386/mach-default/topology.c +++ b/arch/i386/mach-default/topology.c @@ -73,12 +73,11 @@ static int __init topology_init(void) { int i; - for (i = 0; i < MAX_NUMNODES; i++) { - if (node_online(i)) - arch_register_node(i); - } - for (i = 0; i < NR_CPUS; i++) - if (cpu_possible(i)) arch_register_cpu(i); + for_each_online_node(i) + arch_register_node(i); + + for_each_cpu(i) + arch_register_cpu(i); return 0; } @@ -88,8 +87,8 @@ static int __init topology_init(void) { int i; - for (i = 0; i < NR_CPUS; i++) - if (cpu_possible(i)) arch_register_cpu(i); + for_each_cpu(i) + arch_register_cpu(i); return 0; } diff --git a/arch/i386/mach-visws/mpparse.c b/arch/i386/mach-visws/mpparse.c index 5a22082147f4..5f3d7e6de37b 100644 --- a/arch/i386/mach-visws/mpparse.c +++ b/arch/i386/mach-visws/mpparse.c @@ -23,7 +23,6 @@ unsigned long mp_lapic_addr; /* Processor that is doing the boot up */ unsigned int boot_cpu_physical_apicid = -1U; -unsigned int boot_cpu_logical_apicid = -1U; /* Bitmask of physically existing CPUs */ physid_mask_t phys_cpu_present_map; @@ -52,10 +51,8 @@ static void __init MP_processor_info (struct mpc_config_processor *m) (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4, m->mpc_apicver); - if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { + if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) boot_cpu_physical_apicid = m->mpc_apicid; - boot_cpu_logical_apicid = logical_apicid; - } ver = m->mpc_apicver; if ((ver >= 0x14 && m->mpc_apicid >= 0xff) || m->mpc_apicid >= 0xf) { diff --git a/arch/i386/mach-visws/reboot.c b/arch/i386/mach-visws/reboot.c index 3a81e904a7b8..5d73e042ed0a 100644 --- a/arch/i386/mach-visws/reboot.c +++ b/arch/i386/mach-visws/reboot.c @@ -7,13 +7,17 @@ #include "piix4.h" void (*pm_power_off)(void); +EXPORT_SYMBOL(pm_power_off); -void machine_restart(char * __unused) +void machine_shutdown(void) { #ifdef CONFIG_SMP smp_send_stop(); #endif +} +void machine_emergency_restart(void) +{ /* * Visual Workstations restart after this * register is poked on the PIIX4 @@ -21,7 +25,11 @@ void machine_restart(char * __unused) outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT); } -EXPORT_SYMBOL(machine_restart); +void machine_restart(char * __unused) +{ + machine_shutdown(); + machine_emergency_restart(); +} void machine_power_off(void) { @@ -42,10 +50,7 @@ void machine_power_off(void) outl(PIIX_SPECIAL_STOP, 0xCFC); } -EXPORT_SYMBOL(machine_power_off); - void machine_halt(void) { } -EXPORT_SYMBOL(machine_halt); diff --git a/arch/i386/mach-visws/setup.c b/arch/i386/mach-visws/setup.c index 9f6d2d9b1be7..26ada6fc0d77 100644 --- a/arch/i386/mach-visws/setup.c +++ b/arch/i386/mach-visws/setup.c @@ -14,6 +14,8 @@ #include "cobalt.h" #include "piix4.h" +int no_broadcast; + char visws_board_type = -1; char visws_board_rev = -1; diff --git a/arch/i386/mach-voyager/voyager_basic.c b/arch/i386/mach-voyager/voyager_basic.c index 602aea240e9b..c6384061328a 100644 --- a/arch/i386/mach-voyager/voyager_basic.c +++ b/arch/i386/mach-voyager/voyager_basic.c @@ -30,11 +30,13 @@ #include <linux/irq.h> #include <asm/tlbflush.h> #include <asm/arch_hooks.h> +#include <asm/i8253.h> /* * Power off function, if any */ void (*pm_power_off)(void); +EXPORT_SYMBOL(pm_power_off); int voyager_level = 0; @@ -182,7 +184,6 @@ voyager_timer_interrupt(struct pt_regs *regs) * and swiftly introduce it to something sharp and * pointy. */ __u16 val; - extern spinlock_t i8253_lock; spin_lock(&i8253_lock); @@ -251,6 +252,12 @@ kb_wait(void) } void +machine_shutdown(void) +{ + /* Architecture specific shutdown needed before a kexec */ +} + +void machine_restart(char *cmd) { printk("Voyager Warm Restart\n"); @@ -277,7 +284,12 @@ machine_restart(char *cmd) } } -EXPORT_SYMBOL(machine_restart); +void +machine_emergency_restart(void) +{ + /*for now, just hook this to a warm restart */ + machine_restart(NULL); +} void mca_nmi_hook(void) @@ -314,12 +326,9 @@ machine_halt(void) machine_power_off(); } -EXPORT_SYMBOL(machine_halt); - void machine_power_off(void) { if (pm_power_off) pm_power_off(); } -EXPORT_SYMBOL(machine_power_off); diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c index a6e0ddd65bd0..0e1f4208b07c 100644 --- a/arch/i386/mach-voyager/voyager_smp.c +++ b/arch/i386/mach-voyager/voyager_smp.c @@ -10,6 +10,7 @@ * the voyager hal to provide the functionality */ #include <linux/config.h> +#include <linux/module.h> #include <linux/mm.h> #include <linux/kernel_stat.h> #include <linux/delay.h> @@ -40,6 +41,7 @@ static unsigned long cpu_irq_affinity[NR_CPUS] __cacheline_aligned = { [0 ... NR /* per CPU data structure (for /proc/cpuinfo et al), visible externally * indexed physically */ struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned; +EXPORT_SYMBOL(cpu_data); /* physical ID of the CPU used to boot the system */ unsigned char boot_cpu_id; @@ -72,6 +74,7 @@ static volatile unsigned long smp_invalidate_needed; /* Bitmask of currently online CPUs - used by setup.c for /proc/cpuinfo, visible externally but still physical */ cpumask_t cpu_online_map = CPU_MASK_NONE; +EXPORT_SYMBOL(cpu_online_map); /* Bitmask of CPUs present in the system - exported by i386_syms.c, used * by scheduler but indexed physically */ @@ -238,6 +241,7 @@ static cpumask_t smp_commenced_mask = CPU_MASK_NONE; /* This is for the new dynamic CPU boot code */ cpumask_t cpu_callin_map = CPU_MASK_NONE; cpumask_t cpu_callout_map = CPU_MASK_NONE; +EXPORT_SYMBOL(cpu_callout_map); /* The per processor IRQ masks (these are usually kept in sync) */ static __u16 vic_irq_mask[NR_CPUS] __cacheline_aligned; @@ -978,6 +982,7 @@ void flush_tlb_page(struct vm_area_struct * vma, unsigned long va) preempt_enable(); } +EXPORT_SYMBOL(flush_tlb_page); /* enable the requested IRQs */ static void @@ -1109,6 +1114,7 @@ smp_call_function (void (*func) (void *info), void *info, int retry, return 0; } +EXPORT_SYMBOL(smp_call_function); /* Sorry about the name. In an APIC based system, the APICs * themselves are programmed to send a timer interrupt. This is used @@ -1288,7 +1294,7 @@ smp_local_timer_interrupt(struct pt_regs * regs) per_cpu(prof_counter, cpu); } - update_process_times(user_mode(regs)); + update_process_times(user_mode_vm(regs)); } if( ((1<<cpu) & voyager_extended_vic_processors) == 0) diff --git a/arch/i386/mm/Makefile b/arch/i386/mm/Makefile index fc3272506846..80908b5aa60f 100644 --- a/arch/i386/mm/Makefile +++ b/arch/i386/mm/Makefile @@ -4,7 +4,7 @@ obj-y := init.o pgtable.o fault.o ioremap.o extable.o pageattr.o mmap.o -obj-$(CONFIG_DISCONTIGMEM) += discontig.o +obj-$(CONFIG_NUMA) += discontig.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_HIGHMEM) += highmem.o obj-$(CONFIG_BOOT_IOREMAP) += boot_ioremap.o diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c index 1726b4096b10..6711ce3f6916 100644 --- a/arch/i386/mm/discontig.c +++ b/arch/i386/mm/discontig.c @@ -29,12 +29,16 @@ #include <linux/highmem.h> #include <linux/initrd.h> #include <linux/nodemask.h> +#include <linux/module.h> +#include <linux/kexec.h> + #include <asm/e820.h> #include <asm/setup.h> #include <asm/mmzone.h> #include <bios_ebda.h> struct pglist_data *node_data[MAX_NUMNODES]; +EXPORT_SYMBOL(node_data); bootmem_data_t node0_bdata; /* @@ -42,12 +46,16 @@ bootmem_data_t node0_bdata; * populated the following initialisation. * * 1) node_online_map - the map of all nodes configured (online) in the system - * 2) physnode_map - the mapping between a pfn and owning node - * 3) node_start_pfn - the starting page frame number for a node + * 2) node_start_pfn - the starting page frame number for a node * 3) node_end_pfn - the ending page fram number for a node */ +unsigned long node_start_pfn[MAX_NUMNODES]; +unsigned long node_end_pfn[MAX_NUMNODES]; + +#ifdef CONFIG_DISCONTIGMEM /* + * 4) physnode_map - the mapping between a pfn and owning node * physnode_map keeps track of the physical memory layout of a generic * numa node on a 256Mb break (each element of the array will * represent 256Mb of memory and will be marked by the node id. so, @@ -59,6 +67,7 @@ bootmem_data_t node0_bdata; * physnode_map[8- ] = -1; */ s8 physnode_map[MAX_ELEMENTS] = { [0 ... (MAX_ELEMENTS - 1)] = -1}; +EXPORT_SYMBOL(physnode_map); void memory_present(int nid, unsigned long start, unsigned long end) { @@ -85,9 +94,7 @@ unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn, return (nr_pages + 1) * sizeof(struct page); } - -unsigned long node_start_pfn[MAX_NUMNODES]; -unsigned long node_end_pfn[MAX_NUMNODES]; +#endif extern unsigned long find_max_low_pfn(void); extern void find_max_pfn(void); @@ -108,6 +115,9 @@ unsigned long node_remap_offset[MAX_NUMNODES]; void *node_remap_start_vaddr[MAX_NUMNODES]; void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags); +void *node_remap_end_vaddr[MAX_NUMNODES]; +void *node_remap_alloc_vaddr[MAX_NUMNODES]; + /* * FLAT - support for basic PC memory model with discontig enabled, essentially * a single node with all available processors in it with a flat @@ -146,6 +156,21 @@ static void __init find_max_pfn_node(int nid) BUG(); } +/* Find the owning node for a pfn. */ +int early_pfn_to_nid(unsigned long pfn) +{ + int nid; + + for_each_node(nid) { + if (node_end_pfn[nid] == 0) + break; + if (node_start_pfn[nid] <= pfn && node_end_pfn[nid] >= pfn) + return nid; + } + + return 0; +} + /* * Allocate memory for the pg_data_t for this node via a crude pre-bootmem * method. For node zero take this from the bottom of memory, for @@ -163,6 +188,21 @@ static void __init allocate_pgdat(int nid) } } +void *alloc_remap(int nid, unsigned long size) +{ + void *allocation = node_remap_alloc_vaddr[nid]; + + size = ALIGN(size, L1_CACHE_BYTES); + + if (!allocation || (allocation + size) >= node_remap_end_vaddr[nid]) + return 0; + + node_remap_alloc_vaddr[nid] += size; + memset(allocation, 0, size); + + return allocation; +} + void __init remap_numa_kva(void) { void *vaddr; @@ -170,8 +210,6 @@ void __init remap_numa_kva(void) int node; for_each_online_node(node) { - if (node == 0) - continue; for (pfn=0; pfn < node_remap_size[node]; pfn += PTRS_PER_PTE) { vaddr = node_remap_start_vaddr[node]+(pfn<<PAGE_SHIFT); set_pmd_pfn((ulong) vaddr, @@ -185,13 +223,9 @@ static unsigned long calculate_numa_remap_pages(void) { int nid; unsigned long size, reserve_pages = 0; + unsigned long pfn; for_each_online_node(nid) { - if (nid == 0) - continue; - if (!node_remap_size[nid]) - continue; - /* * The acpi/srat node info can show hot-add memroy zones * where memory could be added but not currently present. @@ -208,13 +242,37 @@ static unsigned long calculate_numa_remap_pages(void) size = (size + LARGE_PAGE_BYTES - 1) / LARGE_PAGE_BYTES; /* now the roundup is correct, convert to PAGE_SIZE pages */ size = size * PTRS_PER_PTE; + + /* + * Validate the region we are allocating only contains valid + * pages. + */ + for (pfn = node_end_pfn[nid] - size; + pfn < node_end_pfn[nid]; pfn++) + if (!page_is_ram(pfn)) + break; + + if (pfn != node_end_pfn[nid]) + size = 0; + printk("Reserving %ld pages of KVA for lmem_map of node %d\n", size, nid); node_remap_size[nid] = size; - reserve_pages += size; node_remap_offset[nid] = reserve_pages; + reserve_pages += size; printk("Shrinking node %d from %ld pages to %ld pages\n", nid, node_end_pfn[nid], node_end_pfn[nid] - size); + + if (node_end_pfn[nid] & (PTRS_PER_PTE-1)) { + /* + * Align node_end_pfn[] and node_remap_start_pfn[] to + * pmd boundary. remap_numa_kva will barf otherwise. + */ + printk("Shrinking node %d further by %ld pages for proper alignment\n", + nid, node_end_pfn[nid] & (PTRS_PER_PTE-1)); + size += node_end_pfn[nid] & (PTRS_PER_PTE-1); + } + node_end_pfn[nid] -= size; node_remap_start_pfn[nid] = node_end_pfn[nid]; } @@ -265,12 +323,18 @@ unsigned long __init setup_memory(void) (ulong) pfn_to_kaddr(max_low_pfn)); for_each_online_node(nid) { node_remap_start_vaddr[nid] = pfn_to_kaddr( - (highstart_pfn + reserve_pages) - node_remap_offset[nid]); + highstart_pfn + node_remap_offset[nid]); + /* Init the node remap allocator */ + node_remap_end_vaddr[nid] = node_remap_start_vaddr[nid] + + (node_remap_size[nid] * PAGE_SIZE); + node_remap_alloc_vaddr[nid] = node_remap_start_vaddr[nid] + + ALIGN(sizeof(pg_data_t), PAGE_SIZE); + allocate_pgdat(nid); printk ("node %d will remap to vaddr %08lx - %08lx\n", nid, (ulong) node_remap_start_vaddr[nid], - (ulong) pfn_to_kaddr(highstart_pfn + reserve_pages - - node_remap_offset[nid] + node_remap_size[nid])); + (ulong) pfn_to_kaddr(highstart_pfn + + node_remap_offset[nid] + node_remap_size[nid])); } printk("High memory starts at vaddr %08lx\n", (ulong) pfn_to_kaddr(highstart_pfn)); @@ -333,23 +397,9 @@ void __init zone_sizes_init(void) } zholes_size = get_zholes_size(nid); - /* - * We let the lmem_map for node 0 be allocated from the - * normal bootmem allocator, but other nodes come from the - * remapped KVA area - mbligh - */ - if (!nid) - free_area_init_node(nid, NODE_DATA(nid), - zones_size, start, zholes_size); - else { - unsigned long lmem_map; - lmem_map = (unsigned long)node_remap_start_vaddr[nid]; - lmem_map += sizeof(pg_data_t) + PAGE_SIZE - 1; - lmem_map &= PAGE_MASK; - NODE_DATA(nid)->node_mem_map = (struct page *)lmem_map; - free_area_init_node(nid, NODE_DATA(nid), zones_size, - start, zholes_size); - } + + free_area_init_node(nid, NODE_DATA(nid), zones_size, start, + zholes_size); } return; } @@ -358,24 +408,26 @@ void __init set_highmem_pages_init(int bad_ppro) { #ifdef CONFIG_HIGHMEM struct zone *zone; + struct page *page; for_each_zone(zone) { - unsigned long node_pfn, node_high_size, zone_start_pfn; - struct page * zone_mem_map; - + unsigned long node_pfn, zone_start_pfn, zone_end_pfn; + if (!is_highmem(zone)) continue; - printk("Initializing %s for node %d\n", zone->name, - zone->zone_pgdat->node_id); - - node_high_size = zone->spanned_pages; - zone_mem_map = zone->zone_mem_map; zone_start_pfn = zone->zone_start_pfn; + zone_end_pfn = zone_start_pfn + zone->spanned_pages; + + printk("Initializing %s for node %d (%08lx:%08lx)\n", + zone->name, zone->zone_pgdat->node_id, + zone_start_pfn, zone_end_pfn); - for (node_pfn = 0; node_pfn < node_high_size; node_pfn++) { - one_highpage_init((struct page *)(zone_mem_map + node_pfn), - zone_start_pfn + node_pfn, bad_ppro); + for (node_pfn = zone_start_pfn; node_pfn < zone_end_pfn; node_pfn++) { + if (!pfn_valid(node_pfn)) + continue; + page = pfn_to_page(node_pfn); + one_highpage_init(page, node_pfn, bad_ppro); } } totalram_pages += totalhigh_pages; diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c index a509237c4815..8e90339d6eaa 100644 --- a/arch/i386/mm/fault.c +++ b/arch/i386/mm/fault.c @@ -146,7 +146,7 @@ static int __is_prefetch(struct pt_regs *regs, unsigned long addr) if (instr > limit) break; - if (__get_user(opcode, (unsigned char *) instr)) + if (__get_user(opcode, (unsigned char __user *) instr)) break; instr_hi = opcode & 0xf0; @@ -173,7 +173,7 @@ static int __is_prefetch(struct pt_regs *regs, unsigned long addr) scan_more = 0; if (instr > limit) break; - if (__get_user(opcode, (unsigned char *) instr)) + if (__get_user(opcode, (unsigned char __user *) instr)) break; prefetch = (instr_lo == 0xF) && (opcode == 0x0D || opcode == 0x18); @@ -463,6 +463,9 @@ no_context: printk(KERN_ALERT "*pte = %08lx\n", page); } #endif + tsk->thread.cr2 = address; + tsk->thread.trap_no = 14; + tsk->thread.error_code = error_code; die("Oops", regs, error_code); bust_spinlocks(0); do_exit(SIGKILL); diff --git a/arch/i386/mm/highmem.c b/arch/i386/mm/highmem.c index fc4c4cad4e98..b6eb4dcb8777 100644 --- a/arch/i386/mm/highmem.c +++ b/arch/i386/mm/highmem.c @@ -1,4 +1,5 @@ #include <linux/highmem.h> +#include <linux/module.h> void *kmap(struct page *page) { @@ -74,6 +75,24 @@ void kunmap_atomic(void *kvaddr, enum km_type type) preempt_check_resched(); } +/* This is the same as kmap_atomic() but can map memory that doesn't + * have a struct page associated with it. + */ +void *kmap_atomic_pfn(unsigned long pfn, enum km_type type) +{ + enum fixed_addresses idx; + unsigned long vaddr; + + inc_preempt_count(); + + idx = type + KM_TYPE_NR*smp_processor_id(); + vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); + set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot)); + __flush_tlb_one(vaddr); + + return (void*) vaddr; +} + struct page *kmap_atomic_to_page(void *ptr) { unsigned long idx, vaddr = (unsigned long)ptr; @@ -87,3 +106,8 @@ struct page *kmap_atomic_to_page(void *ptr) return pte_page(*pte); } +EXPORT_SYMBOL(kmap); +EXPORT_SYMBOL(kunmap); +EXPORT_SYMBOL(kmap_atomic); +EXPORT_SYMBOL(kunmap_atomic); +EXPORT_SYMBOL(kmap_atomic_to_page); diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index 8766c771bb45..12216b52e28b 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -191,7 +191,7 @@ static inline int page_kills_ppro(unsigned long pagenr) extern int is_available_memory(efi_memory_desc_t *); -static inline int page_is_ram(unsigned long pagenr) +int page_is_ram(unsigned long pagenr) { int i; unsigned long addr, end; @@ -276,7 +276,9 @@ void __init one_highpage_init(struct page *page, int pfn, int bad_ppro) SetPageReserved(page); } -#ifndef CONFIG_DISCONTIGMEM +#ifdef CONFIG_NUMA +extern void set_highmem_pages_init(int); +#else static void __init set_highmem_pages_init(int bad_ppro) { int pfn; @@ -284,9 +286,7 @@ static void __init set_highmem_pages_init(int bad_ppro) one_highpage_init(pfn_to_page(pfn), pfn, bad_ppro); totalram_pages += totalhigh_pages; } -#else -extern void set_highmem_pages_init(int); -#endif /* !CONFIG_DISCONTIGMEM */ +#endif /* CONFIG_FLATMEM */ #else #define kmap_init() do { } while (0) @@ -295,12 +295,13 @@ extern void set_highmem_pages_init(int); #endif /* CONFIG_HIGHMEM */ unsigned long long __PAGE_KERNEL = _PAGE_KERNEL; +EXPORT_SYMBOL(__PAGE_KERNEL); unsigned long long __PAGE_KERNEL_EXEC = _PAGE_KERNEL_EXEC; -#ifndef CONFIG_DISCONTIGMEM -#define remap_numa_kva() do {} while (0) -#else +#ifdef CONFIG_NUMA extern void __init remap_numa_kva(void); +#else +#define remap_numa_kva() do {} while (0) #endif static void __init pagetable_init (void) @@ -351,7 +352,7 @@ static void __init pagetable_init (void) #endif } -#if defined(CONFIG_PM_DISK) || defined(CONFIG_SOFTWARE_SUSPEND) +#ifdef CONFIG_SOFTWARE_SUSPEND /* * Swap suspend & friends need this for resume because things like the intel-agp * driver might have split up a kernel 4MB mapping. @@ -525,7 +526,7 @@ static void __init set_max_mapnr_init(void) #else num_physpages = max_low_pfn; #endif -#ifndef CONFIG_DISCONTIGMEM +#ifdef CONFIG_FLATMEM max_mapnr = num_physpages; #endif } @@ -539,7 +540,7 @@ void __init mem_init(void) int tmp; int bad_ppro; -#ifndef CONFIG_DISCONTIGMEM +#ifdef CONFIG_FLATMEM if (!mem_map) BUG(); #endif diff --git a/arch/i386/mm/ioremap.c b/arch/i386/mm/ioremap.c index ab542792b27b..f379b8d67558 100644 --- a/arch/i386/mm/ioremap.c +++ b/arch/i386/mm/ioremap.c @@ -11,6 +11,7 @@ #include <linux/vmalloc.h> #include <linux/init.h> #include <linux/slab.h> +#include <linux/module.h> #include <asm/io.h> #include <asm/fixmap.h> #include <asm/cacheflush.h> @@ -165,7 +166,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l } return (void __iomem *) (offset + (char __iomem *)addr); } - +EXPORT_SYMBOL(__ioremap); /** * ioremap_nocache - map bus memory into CPU space @@ -222,11 +223,13 @@ void __iomem *ioremap_nocache (unsigned long phys_addr, unsigned long size) return p; } +EXPORT_SYMBOL(ioremap_nocache); void iounmap(volatile void __iomem *addr) { struct vm_struct *p; - if ((void __force *) addr <= high_memory) + + if ((void __force *)addr <= high_memory) return; /* @@ -239,9 +242,10 @@ void iounmap(volatile void __iomem *addr) return; write_lock(&vmlist_lock); - p = __remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr)); + p = __remove_vm_area((void *)(PAGE_MASK & (unsigned long __force)addr)); if (!p) { - printk("iounmap: bad address %p\n", addr); + printk(KERN_WARNING "iounmap: bad address %p\n", addr); + dump_stack(); goto out_unlock; } @@ -255,6 +259,7 @@ out_unlock: write_unlock(&vmlist_lock); kfree(p); } +EXPORT_SYMBOL(iounmap); void __init *bt_ioremap(unsigned long phys_addr, unsigned long size) { diff --git a/arch/i386/mm/pgtable.c b/arch/i386/mm/pgtable.c index dd81479ff88a..bd2f7afc7a2a 100644 --- a/arch/i386/mm/pgtable.c +++ b/arch/i386/mm/pgtable.c @@ -30,13 +30,14 @@ void show_mem(void) struct page *page; pg_data_t *pgdat; unsigned long i; + struct page_state ps; - printk("Mem-info:\n"); + printk(KERN_INFO "Mem-info:\n"); show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); + printk(KERN_INFO "Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); for_each_pgdat(pgdat) { for (i = 0; i < pgdat->node_spanned_pages; ++i) { - page = pgdat->node_mem_map + i; + page = pgdat_page_nr(pgdat, i); total++; if (PageHighMem(page)) highmem++; @@ -48,11 +49,18 @@ void show_mem(void) shared += page_count(page) - 1; } } - printk("%d pages of RAM\n", total); - printk("%d pages of HIGHMEM\n",highmem); - printk("%d reserved pages\n",reserved); - printk("%d pages shared\n",shared); - printk("%d pages swap cached\n",cached); + printk(KERN_INFO "%d pages of RAM\n", total); + printk(KERN_INFO "%d pages of HIGHMEM\n", highmem); + printk(KERN_INFO "%d reserved pages\n", reserved); + printk(KERN_INFO "%d pages shared\n", shared); + printk(KERN_INFO "%d pages swap cached\n", cached); + + get_page_state(&ps); + printk(KERN_INFO "%lu pages dirty\n", ps.nr_dirty); + printk(KERN_INFO "%lu pages writeback\n", ps.nr_writeback); + printk(KERN_INFO "%lu pages mapped\n", ps.nr_mapped); + printk(KERN_INFO "%lu pages slab\n", ps.nr_slab); + printk(KERN_INFO "%lu pages pagetables\n", ps.nr_page_table_pages); } /* @@ -105,16 +113,16 @@ void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags) pmd_t *pmd; if (vaddr & (PMD_SIZE-1)) { /* vaddr is misaligned */ - printk ("set_pmd_pfn: vaddr misaligned\n"); + printk(KERN_WARNING "set_pmd_pfn: vaddr misaligned\n"); return; /* BUG(); */ } if (pfn & (PTRS_PER_PTE-1)) { /* pfn is misaligned */ - printk ("set_pmd_pfn: pfn misaligned\n"); + printk(KERN_WARNING "set_pmd_pfn: pfn misaligned\n"); return; /* BUG(); */ } pgd = swapper_pg_dir + pgd_index(vaddr); if (pgd_none(*pgd)) { - printk ("set_pmd_pfn: pgd_none\n"); + printk(KERN_WARNING "set_pmd_pfn: pgd_none\n"); return; /* BUG(); */ } pud = pud_offset(pgd, vaddr); diff --git a/arch/i386/oprofile/backtrace.c b/arch/i386/oprofile/backtrace.c index 52d72e074f7f..65dfd2edb671 100644 --- a/arch/i386/oprofile/backtrace.c +++ b/arch/i386/oprofile/backtrace.c @@ -91,7 +91,7 @@ x86_backtrace(struct pt_regs * const regs, unsigned int depth) head = (struct frame_head *)regs->ebp; #endif - if (!user_mode(regs)) { + if (!user_mode_vm(regs)) { while (depth-- && valid_kernel_stack(head, regs)) head = dump_backtrace(head); return; diff --git a/arch/i386/pci/acpi.c b/arch/i386/pci/acpi.c index 2db65ec45dc3..42913f43feb0 100644 --- a/arch/i386/pci/acpi.c +++ b/arch/i386/pci/acpi.c @@ -30,6 +30,7 @@ static int __init pci_acpi_init(void) acpi_irq_penalty_init(); pcibios_scanned++; pcibios_enable_irq = acpi_pci_irq_enable; + pcibios_disable_irq = acpi_pci_irq_disable; if (pci_routeirq) { /* diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index 720975e1af50..ade5bc57c34c 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -25,7 +25,8 @@ unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | int pci_routeirq; int pcibios_last_bus = -1; -struct pci_bus *pci_root_bus = NULL; +unsigned long pirq_table_addr; +struct pci_bus *pci_root_bus; struct pci_raw_ops *raw_pci_ops; static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) @@ -133,7 +134,7 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum) printk("PCI: Probing PCI hardware (bus %02x)\n", busnum); - return pci_scan_bus(busnum, &pci_root_ops, NULL); + return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, NULL); } extern u8 pci_cache_line_size; @@ -164,6 +165,7 @@ static int __init pcibios_init(void) if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT)) pcibios_sort(); #endif + pci_assign_unassigned_resources(); return 0; } @@ -188,6 +190,9 @@ char * __devinit pcibios_setup(char *str) } else if (!strcmp(str, "biosirq")) { pci_probe |= PCI_BIOS_IRQ_SCAN; return NULL; + } else if (!strncmp(str, "pirqaddr=", 9)) { + pirq_table_addr = simple_strtoul(str+9, NULL, 0); + return NULL; } #endif #ifdef CONFIG_PCI_DIRECT @@ -249,3 +254,9 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return pcibios_enable_irq(dev); } + +void pcibios_disable_device (struct pci_dev *dev) +{ + if (pcibios_disable_irq) + pcibios_disable_irq(dev); +} diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c index c205ea7e233b..93a364c82150 100644 --- a/arch/i386/pci/i386.c +++ b/arch/i386/pci/i386.c @@ -106,11 +106,16 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) if ((dev = bus->self)) { for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) { r = &dev->resource[idx]; - if (!r->start) + if (!r->flags) continue; pr = pci_find_parent_resource(dev, r); - if (!pr || request_resource(pr, r) < 0) + if (!r->start || !pr || request_resource(pr, r) < 0) { printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev)); + /* Something is wrong with the region. + Invalidate the resource to prevent child + resource allocations in this range. */ + r->flags = 0; + } } } pcibios_allocate_bus_resources(&bus->children); @@ -227,7 +232,7 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask) pci_read_config_word(dev, PCI_COMMAND, &cmd); old_cmd = cmd; - for(idx=0; idx<6; idx++) { + for(idx = 0; idx < PCI_NUM_RESOURCES; idx++) { /* Only set up the requested stuff */ if (!(mask & (1<<idx))) continue; diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index da21b1d07c15..86348b68fda1 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -56,6 +56,36 @@ struct irq_router_handler { }; int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL; +void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL; + +/* + * Check passed address for the PCI IRQ Routing Table signature + * and perform checksum verification. + */ + +static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr) +{ + struct irq_routing_table *rt; + int i; + u8 sum; + + rt = (struct irq_routing_table *) addr; + if (rt->signature != PIRQ_SIGNATURE || + rt->version != PIRQ_VERSION || + rt->size % 16 || + rt->size < sizeof(struct irq_routing_table)) + return NULL; + sum = 0; + for (i=0; i < rt->size; i++) + sum += addr[i]; + if (!sum) { + DBG("PCI: Interrupt Routing Table found at 0x%p\n", rt); + return rt; + } + return NULL; +} + + /* * Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table. @@ -65,23 +95,17 @@ static struct irq_routing_table * __init pirq_find_routing_table(void) { u8 *addr; struct irq_routing_table *rt; - int i; - u8 sum; + if (pirq_table_addr) { + rt = pirq_check_routing_table((u8 *) __va(pirq_table_addr)); + if (rt) + return rt; + printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n"); + } for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) { - rt = (struct irq_routing_table *) addr; - if (rt->signature != PIRQ_SIGNATURE || - rt->version != PIRQ_VERSION || - rt->size % 16 || - rt->size < sizeof(struct irq_routing_table)) - continue; - sum = 0; - for(i=0; i<rt->size; i++) - sum += addr[i]; - if (!sum) { - DBG("PCI: Interrupt Routing Table found at 0x%p\n", rt); + rt = pirq_check_routing_table(addr); + if (rt) return rt; - } } return NULL; } @@ -227,6 +251,24 @@ static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, i } /* + * The VIA pirq rules are nibble-based, like ALI, + * but without the ugly irq number munging. + * However, for 82C586, nibble map is different . + */ +static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + static unsigned int pirqmap[4] = { 3, 2, 5, 1 }; + return read_config_nybble(router, 0x55, pirqmap[pirq-1]); +} + +static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + static unsigned int pirqmap[4] = { 3, 2, 5, 1 }; + write_config_nybble(router, 0x55, pirqmap[pirq-1], irq); + return 1; +} + +/* * ITE 8330G pirq rules are nibble-based * FIXME: pirqmap may be { 1, 0, 3, 2 }, * 2+3 are both mapped to irq 9 on my system @@ -509,9 +551,20 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route static __init int via_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { /* FIXME: We should move some of the quirk fixup stuff here */ + + if (router->device == PCI_DEVICE_ID_VIA_82C686 && + device == PCI_DEVICE_ID_VIA_82C586_0) { + /* Asus k7m bios wrongly reports 82C686A as 586-compatible */ + device = PCI_DEVICE_ID_VIA_82C686; + } + switch(device) { case PCI_DEVICE_ID_VIA_82C586_0: + r->name = "VIA"; + r->get = pirq_via586_get; + r->set = pirq_via586_set; + return 1; case PCI_DEVICE_ID_VIA_82C596: case PCI_DEVICE_ID_VIA_82C686: case PCI_DEVICE_ID_VIA_8231: @@ -1006,24 +1059,28 @@ static int __init pcibios_irq_init(void) subsys_initcall(pcibios_irq_init); -static void pirq_penalize_isa_irq(int irq) +static void pirq_penalize_isa_irq(int irq, int active) { /* * If any ISAPnP device reports an IRQ in its list of possible * IRQ's, we try to avoid assigning it to PCI devices. */ - if (irq < 16) - pirq_penalty[irq] += 100; + if (irq < 16) { + if (active) + pirq_penalty[irq] += 1000; + else + pirq_penalty[irq] += 100; + } } -void pcibios_penalize_isa_irq(int irq) +void pcibios_penalize_isa_irq(int irq, int active) { #ifdef CONFIG_ACPI_PCI if (!acpi_noirq) - acpi_penalize_isa_irq(irq); + acpi_penalize_isa_irq(irq, active); else #endif - pirq_penalize_isa_irq(irq); + pirq_penalize_isa_irq(irq, active); } static int pirq_enable_irq(struct pci_dev *dev) diff --git a/arch/i386/pci/legacy.c b/arch/i386/pci/legacy.c index 1492e3753869..149a9588c256 100644 --- a/arch/i386/pci/legacy.c +++ b/arch/i386/pci/legacy.c @@ -45,6 +45,8 @@ static int __init pci_legacy_init(void) printk("PCI: Probing PCI hardware\n"); pci_root_bus = pcibios_scan_root(0); + if (pci_root_bus) + pci_bus_add_devices(pci_root_bus); pcibios_fixup_peer_bridges(); diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 021a50aa51f4..60f0e7a1162a 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -11,11 +11,9 @@ #include <linux/pci.h> #include <linux/init.h> +#include <linux/acpi.h> #include "pci.h" -/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ -u32 pci_mmcfg_base_addr; - #define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG)) /* The base address of the last MMCONFIG device accessed */ @@ -24,10 +22,31 @@ static u32 mmcfg_last_accessed_device; /* * Functions for accessing PCI configuration space with MMCONFIG accesses */ +static u32 get_base_addr(unsigned int seg, int bus) +{ + int cfg_num = -1; + struct acpi_table_mcfg_config *cfg; + + while (1) { + ++cfg_num; + if (cfg_num >= pci_mmcfg_config_num) { + /* something bad is going on, no cfg table is found. */ + /* so we fall back to the old way we used to do this */ + /* and just rely on the first entry to be correct. */ + return pci_mmcfg_config[0].base_address; + } + cfg = &pci_mmcfg_config[cfg_num]; + if (cfg->pci_segment_group_number != seg) + continue; + if ((cfg->start_bus_number <= bus) && + (cfg->end_bus_number >= bus)) + return cfg->base_address; + } +} -static inline void pci_exp_set_dev_base(int bus, int devfn) +static inline void pci_exp_set_dev_base(unsigned int seg, int bus, int devfn) { - u32 dev_base = pci_mmcfg_base_addr | (bus << 20) | (devfn << 12); + u32 dev_base = get_base_addr(seg, bus) | (bus << 20) | (devfn << 12); if (dev_base != mmcfg_last_accessed_device) { mmcfg_last_accessed_device = dev_base; set_fixmap_nocache(FIX_PCIE_MCFG, dev_base); @@ -44,7 +63,7 @@ static int pci_mmcfg_read(unsigned int seg, unsigned int bus, spin_lock_irqsave(&pci_config_lock, flags); - pci_exp_set_dev_base(bus, devfn); + pci_exp_set_dev_base(seg, bus, devfn); switch (len) { case 1: @@ -73,7 +92,7 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus, spin_lock_irqsave(&pci_config_lock, flags); - pci_exp_set_dev_base(bus, devfn); + pci_exp_set_dev_base(seg, bus, devfn); switch (len) { case 1: @@ -101,7 +120,11 @@ static int __init pci_mmcfg_init(void) { if ((pci_probe & PCI_PROBE_MMCONF) == 0) goto out; - if (!pci_mmcfg_base_addr) + + acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg); + if ((pci_mmcfg_config_num == 0) || + (pci_mmcfg_config == NULL) || + (pci_mmcfg_config[0].base_address == 0)) goto out; /* Kludge for now. Don't use mmconfig on AMD systems because diff --git a/arch/i386/pci/numa.c b/arch/i386/pci/numa.c index 9e3695461899..adbe17a38f6f 100644 --- a/arch/i386/pci/numa.c +++ b/arch/i386/pci/numa.c @@ -115,6 +115,8 @@ static int __init pci_numa_init(void) return 0; pci_root_bus = pcibios_scan_root(0); + if (pci_root_bus) + pci_bus_add_devices(pci_root_bus); if (num_online_nodes() > 1) for_each_online_node(quad) { if (quad == 0) diff --git a/arch/i386/pci/pcbios.c b/arch/i386/pci/pcbios.c index 141421b673b0..b9d65f0bc2d1 100644 --- a/arch/i386/pci/pcbios.c +++ b/arch/i386/pci/pcbios.c @@ -4,6 +4,7 @@ #include <linux/pci.h> #include <linux/init.h> +#include <linux/module.h> #include "pci.h" #include "pci-functions.h" @@ -456,7 +457,7 @@ struct irq_routing_table * __devinit pcibios_get_irq_routing_table(void) free_page(page); return rt; } - +EXPORT_SYMBOL(pcibios_get_irq_routing_table); int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq) { @@ -473,6 +474,7 @@ int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq) "S" (&pci_indirect)); return !(ret & 0xff00); } +EXPORT_SYMBOL(pcibios_set_irq_routing); static int __init pci_pcbios_init(void) { diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h index a8fc80ca69f3..127d53ad16be 100644 --- a/arch/i386/pci/pci.h +++ b/arch/i386/pci/pci.h @@ -27,6 +27,7 @@ #define PCI_ASSIGN_ALL_BUSSES 0x4000 extern unsigned int pci_probe; +extern unsigned long pirq_table_addr; /* pci-i386.c */ @@ -72,3 +73,4 @@ extern int pcibios_scanned; extern spinlock_t pci_config_lock; extern int (*pcibios_enable_irq)(struct pci_dev *dev); +extern void (*pcibios_disable_irq)(struct pci_dev *dev); diff --git a/arch/i386/pci/visws.c b/arch/i386/pci/visws.c index 6a9248784439..6c17433fdf7d 100644 --- a/arch/i386/pci/visws.c +++ b/arch/i386/pci/visws.c @@ -18,10 +18,12 @@ extern struct pci_raw_ops pci_direct_conf1; static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; } +static void pci_visws_disable_irq(struct pci_dev *dev) { } int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq; +void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq; -void __init pcibios_penalize_isa_irq(int irq) {} +void __init pcibios_penalize_isa_irq(int irq, int active) {} unsigned int pci_bus0, pci_bus1; diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c index cf337c673d92..c547c1af6fa1 100644 --- a/arch/i386/power/cpu.c +++ b/arch/i386/power/cpu.c @@ -22,9 +22,11 @@ #include <linux/device.h> #include <linux/suspend.h> #include <linux/acpi.h> + #include <asm/uaccess.h> #include <asm/acpi.h> #include <asm/tlbflush.h> +#include <asm/processor.h> static struct saved_context saved_context; @@ -33,8 +35,6 @@ unsigned long saved_context_esp, saved_context_ebp; unsigned long saved_context_esi, saved_context_edi; unsigned long saved_context_eflags; -extern void enable_sep_cpu(void *); - void __save_processor_state(struct saved_context *ctxt) { kernel_fpu_begin(); @@ -44,7 +44,6 @@ void __save_processor_state(struct saved_context *ctxt) */ asm volatile ("sgdt %0" : "=m" (ctxt->gdt_limit)); asm volatile ("sidt %0" : "=m" (ctxt->idt_limit)); - asm volatile ("sldt %0" : "=m" (ctxt->ldt)); asm volatile ("str %0" : "=m" (ctxt->tr)); /* @@ -94,20 +93,19 @@ static void fix_processor_context(void) * Now maybe reload the debug registers */ if (current->thread.debugreg[7]){ - loaddebug(¤t->thread, 0); - loaddebug(¤t->thread, 1); - loaddebug(¤t->thread, 2); - loaddebug(¤t->thread, 3); - /* no 4 and 5 */ - loaddebug(¤t->thread, 6); - loaddebug(¤t->thread, 7); + set_debugreg(current->thread.debugreg[0], 0); + set_debugreg(current->thread.debugreg[1], 1); + set_debugreg(current->thread.debugreg[2], 2); + set_debugreg(current->thread.debugreg[3], 3); + /* no 4 and 5 */ + set_debugreg(current->thread.debugreg[6], 6); + set_debugreg(current->thread.debugreg[7], 7); } } void __restore_processor_state(struct saved_context *ctxt) { - /* * control registers */ @@ -117,6 +115,13 @@ void __restore_processor_state(struct saved_context *ctxt) asm volatile ("movl %0, %%cr0" :: "r" (ctxt->cr0)); /* + * now restore the descriptor tables to their proper values + * ltr is done i fix_processor_context(). + */ + asm volatile ("lgdt %0" :: "m" (ctxt->gdt_limit)); + asm volatile ("lidt %0" :: "m" (ctxt->idt_limit)); + + /* * segment registers */ asm volatile ("movw %0, %%es" :: "r" (ctxt->es)); @@ -125,21 +130,14 @@ void __restore_processor_state(struct saved_context *ctxt) asm volatile ("movw %0, %%ss" :: "r" (ctxt->ss)); /* - * now restore the descriptor tables to their proper values - * ltr is done i fix_processor_context(). - */ - asm volatile ("lgdt %0" :: "m" (ctxt->gdt_limit)); - asm volatile ("lidt %0" :: "m" (ctxt->idt_limit)); - asm volatile ("lldt %0" :: "m" (ctxt->ldt)); - - /* * sysenter MSRs */ if (boot_cpu_has(X86_FEATURE_SEP)) - enable_sep_cpu(NULL); + enable_sep_cpu(); fix_processor_context(); do_fpu_end(); + mtrr_ap_init(); } void restore_processor_state(void) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 34e603cc1716..cbb3e0cef93a 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -161,6 +161,8 @@ config IA64_PAGE_SIZE_64KB endchoice +source kernel/Kconfig.hz + config IA64_BRL_EMU bool depends on ITANIUM @@ -197,7 +199,7 @@ config HOLES_IN_ZONE bool default y if VIRTUAL_MEM_MAP -config DISCONTIGMEM +config ARCH_DISCONTIGMEM_ENABLE bool "Discontiguous memory support" depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA @@ -218,13 +220,6 @@ config IOSAPIC depends on !IA64_HP_SIM default y -config IA64_SGI_SN_SIM - bool "SGI Medusa Simulator Support" - depends on IA64_SGI_SN2 - help - If you are compiling a kernel that will run under SGI's IA-64 - simulator (Medusa) then say Y, otherwise say N. - config IA64_SGI_SN_XP tristate "Support communication between SGI SSIs" select IA64_UNCACHED_ALLOCATOR @@ -300,6 +295,8 @@ config PREEMPT Say Y here if you are building a kernel for a desktop, embedded or real-time system. Say N if you are unsure. +source "mm/Kconfig" + config HAVE_DEC_LOCK bool depends on (SMP || PREEMPT) @@ -419,6 +416,8 @@ endmenu endif +source "net/Kconfig" + source "drivers/Kconfig" source "fs/Kconfig" diff --git a/arch/ia64/Kconfig.debug b/arch/ia64/Kconfig.debug index de9d507ba0fd..fda67ac993d7 100644 --- a/arch/ia64/Kconfig.debug +++ b/arch/ia64/Kconfig.debug @@ -2,6 +2,17 @@ menu "Kernel hacking" source "lib/Kconfig.debug" +config KPROBES + bool "Kprobes" + depends on DEBUG_KERNEL + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". + + choice prompt "Physical memory granularity" default IA64_GRANULE_64MB diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index a01bb02d074d..04d0b00a2b8c 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -78,10 +78,9 @@ CONFIG_IA64_L1_CACHE_SHIFT=7 CONFIG_NUMA=y CONFIG_VIRTUAL_MEM_MAP=y CONFIG_HOLES_IN_ZONE=y -CONFIG_DISCONTIGMEM=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y # CONFIG_IA64_CYCLONE is not set CONFIG_IOSAPIC=y -CONFIG_IA64_SGI_SN_SIM=y CONFIG_FORCE_MAX_ZONEORDER=18 CONFIG_SMP=y CONFIG_NR_CPUS=512 @@ -99,7 +98,7 @@ CONFIG_ACPI_DEALLOCATE_IRQ=y # Firmware Drivers # CONFIG_EFI_VARS=y -# CONFIG_EFI_PCDP is not set +CONFIG_EFI_PCDP=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set @@ -650,7 +649,7 @@ CONFIG_MMTIMER=y # # Console display driver support # -# CONFIG_VGA_CONSOLE is not set +CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y # diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index 9086b789f6ac..73454eee26f1 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc3 -# Tue May 3 15:55:04 2005 +# Linux kernel version: 2.6.13-rc1-20050629 +# Wed Jun 29 15:28:12 2005 # # @@ -67,6 +67,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_ZX1 is not set @@ -79,18 +80,29 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 # CONFIG_NUMA is not set CONFIG_VIRTUAL_MEM_MAP=y CONFIG_HOLES_IN_ZONE=y CONFIG_IA64_CYCLONE=y CONFIG_IOSAPIC=y +# CONFIG_IA64_SGI_SN_XP is not set CONFIG_FORCE_MAX_ZONEORDER=18 CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_HOTPLUG_CPU=y # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y @@ -256,6 +268,7 @@ CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -285,6 +298,7 @@ CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -313,11 +327,8 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set @@ -366,8 +377,10 @@ CONFIG_DM_ZERO=m # Fusion MPT device support # CONFIG_FUSION=y -CONFIG_FUSION_MAX_SGE=40 -# CONFIG_FUSION_CTL is not set +CONFIG_FUSION_SPI=y +CONFIG_FUSION_FC=y +CONFIG_FUSION_MAX_SGE=128 +CONFIG_FUSION_CTL=y # # IEEE 1394 (FireWire) support @@ -394,6 +407,7 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set @@ -406,6 +420,8 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set CONFIG_IP_TCPDIAG=y # CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set @@ -506,9 +522,11 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -595,10 +613,7 @@ CONFIG_GAMEPORT=m # CONFIG_GAMEPORT_NS558 is not set # CONFIG_GAMEPORT_L4 is not set # CONFIG_GAMEPORT_EMU10K1 is not set -# CONFIG_GAMEPORT_VORTEX is not set # CONFIG_GAMEPORT_FM801 is not set -# CONFIG_GAMEPORT_CS461X is not set -CONFIG_SOUND_GAMEPORT=m # # Character devices @@ -611,7 +626,6 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_CYCLADES is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set -# CONFIG_SYNCLINK is not set # CONFIG_SYNCLINKMP is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set @@ -628,7 +642,6 @@ CONFIG_SERIAL_8250_NR_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -742,6 +755,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -778,9 +792,11 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -837,7 +853,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -856,12 +872,17 @@ CONFIG_USB_HIDINPUT=y # CONFIG_INFINIBAND is not set # +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -921,7 +942,6 @@ CONFIG_NTFS_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y CONFIG_TMPFS_XATTR=y @@ -952,15 +972,18 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=m CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m @@ -1068,6 +1091,7 @@ CONFIG_LOG_BUF_SHIFT=20 # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_KPROBES is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set @@ -1089,7 +1113,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 21d6f9bab5e9..b7755e4436d2 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10 -# Wed Dec 29 09:05:48 2004 +# Linux kernel version: 2.6.13-rc1-20050629 +# Wed Jun 29 15:31:11 2005 # # @@ -12,6 +12,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -24,23 +25,26 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=17 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -59,12 +63,15 @@ CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set CONFIG_IA64_HP_ZX1=y +# CONFIG_IA64_HP_ZX1_SWIOTLB is not set # CONFIG_IA64_SGI_SN2 is not set # CONFIG_IA64_HP_SIM is not set # CONFIG_ITANIUM is not set @@ -73,22 +80,36 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 # CONFIG_NUMA is not set CONFIG_VIRTUAL_MEM_MAP=y +CONFIG_HOLES_IN_ZONE=y # CONFIG_IA64_CYCLONE is not set CONFIG_IOSAPIC=y +# CONFIG_IA64_SGI_SN_XP is not set CONFIG_FORCE_MAX_ZONEORDER=18 CONFIG_SMP=y CONFIG_NR_CPUS=16 # CONFIG_HOTPLUG_CPU is not set +# CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y +CONFIG_ACPI_DEALLOCATE_IRQ=y # # Firmware Drivers @@ -120,6 +141,7 @@ CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y +# CONFIG_ACPI_CONTAINER is not set # # Bus options (PCI, PCMCIA) @@ -129,6 +151,7 @@ CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCI Hotplug Support @@ -138,7 +161,6 @@ CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_ACPI=y # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set # CONFIG_HOTPLUG_PCI_CPCI is not set -# CONFIG_HOTPLUG_PCI_PCIE is not set # CONFIG_HOTPLUG_PCI_SHPC is not set # @@ -147,10 +169,6 @@ CONFIG_HOTPLUG_PCI_ACPI=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # Device Drivers # @@ -184,6 +202,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -203,6 +222,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -246,6 +266,7 @@ CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -275,6 +296,7 @@ CONFIG_CHR_DEV_OSST=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -288,6 +310,7 @@ CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers @@ -303,13 +326,10 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set @@ -319,8 +339,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y @@ -331,7 +349,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -344,9 +362,9 @@ CONFIG_SCSI_QLA2XXX=y # # Fusion MPT device support # -CONFIG_FUSION=y -CONFIG_FUSION_MAX_SGE=40 -# CONFIG_FUSION_CTL is not set +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support @@ -368,12 +386,12 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set @@ -386,6 +404,8 @@ CONFIG_IP_MULTICAST=y # CONFIG_INET_TUNNEL is not set # CONFIG_IP_TCPDIAG is not set # CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y # # IP: Virtual Server Configuration @@ -405,8 +425,6 @@ CONFIG_NETFILTER=y CONFIG_IP_NF_ARPTABLES=y # CONFIG_IP_NF_ARPFILTER is not set # CONFIG_IP_NF_ARP_MANGLE is not set -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -# CONFIG_IP_NF_COMPAT_IPFWADM is not set # # SCTP Configuration (EXPERIMENTAL) @@ -483,7 +501,6 @@ CONFIG_NET_PCI=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -505,9 +522,11 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -565,18 +584,6 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -586,6 +593,16 @@ CONFIG_SERIO=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -603,7 +620,6 @@ CONFIG_SERIAL_8250_NR_UARTS=8 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -611,6 +627,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -644,6 +661,12 @@ CONFIG_DRM_RADEON=y # CONFIG_DRM_SIS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -668,6 +691,7 @@ CONFIG_I2C_ALGOPCF=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -691,10 +715,14 @@ CONFIG_I2C_ALGOPCF=y # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -705,21 +733,29 @@ CONFIG_I2C_ALGOPCF=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -746,6 +782,7 @@ CONFIG_VIDEO_DEV=y # # Video Adapters # +# CONFIG_TUNER_MULTI_I2C is not set # CONFIG_VIDEO_BT848 is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5246A is not set @@ -778,6 +815,11 @@ CONFIG_VIDEO_DEV=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -785,6 +827,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set @@ -801,6 +844,7 @@ CONFIG_FB_RADEON_DEBUG=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -820,6 +864,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -869,6 +914,8 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -876,6 +923,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set @@ -893,13 +941,14 @@ CONFIG_SND_FM801_TEA575X=y # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set # # USB devices # # CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set # # Open Sound System @@ -909,6 +958,8 @@ CONFIG_SND_FM801_TEA575X=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -920,8 +971,6 @@ CONFIG_USB_BANDWIDTH=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -929,7 +978,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -947,12 +999,11 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set @@ -966,9 +1017,11 @@ CONFIG_USB_HIDINPUT=y CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -978,7 +1031,6 @@ CONFIG_USB_HIDDEV=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices @@ -992,6 +1044,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_SE401 is not set # CONFIG_USB_SN9C102 is not set # CONFIG_USB_STV680 is not set +# CONFIG_USB_PWC is not set # # USB Network Adapters @@ -1001,6 +1054,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -1016,7 +1070,6 @@ CONFIG_USB_HIDDEV=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set @@ -1025,9 +1078,11 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -1041,12 +1096,22 @@ CONFIG_USB_HIDDEV=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -1056,6 +1121,10 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -1089,7 +1158,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y CONFIG_TMPFS_XATTR=y @@ -1120,15 +1188,18 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y @@ -1209,6 +1280,8 @@ CONFIG_NLS_UTF8=y # CONFIG_CRC_CCITT is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y # # Profiling support @@ -1218,14 +1291,18 @@ CONFIG_CRC32=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +CONFIG_KPROBES=y CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set CONFIG_IA64_PRINT_HAZARDS=y @@ -1252,6 +1329,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 9997ef45ab23..8444add76380 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10 -# Thu Jan 6 11:13:13 2005 +# Linux kernel version: 2.6.12 +# Tue Jun 21 11:30:42 2005 # # @@ -10,6 +10,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -21,24 +22,27 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=20 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -63,9 +67,11 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_IA64_GENERIC=y # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set +# CONFIG_IA64_HP_ZX1_SWIOTLB is not set # CONFIG_IA64_SGI_SN2 is not set # CONFIG_IA64_HP_SIM is not set # CONFIG_ITANIUM is not set @@ -77,13 +83,15 @@ CONFIG_IA64_PAGE_SIZE_16KB=y CONFIG_IA64_L1_CACHE_SHIFT=7 CONFIG_NUMA=y CONFIG_VIRTUAL_MEM_MAP=y -CONFIG_DISCONTIGMEM=y +CONFIG_HOLES_IN_ZONE=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_IA64_CYCLONE=y CONFIG_IOSAPIC=y CONFIG_FORCE_MAX_ZONEORDER=18 CONFIG_SMP=y CONFIG_NR_CPUS=512 CONFIG_HOTPLUG_CPU=y +# CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y @@ -135,6 +143,7 @@ CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCI Hotplug Support @@ -144,7 +153,6 @@ CONFIG_HOTPLUG_PCI=m CONFIG_HOTPLUG_PCI_ACPI=m # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set # CONFIG_HOTPLUG_PCI_CPCI is not set -# CONFIG_HOTPLUG_PCI_PCIE is not set # CONFIG_HOTPLUG_PCI_SHPC is not set # @@ -153,10 +161,6 @@ CONFIG_HOTPLUG_PCI_ACPI=m # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # Device Drivers # @@ -190,6 +194,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m @@ -209,6 +214,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -283,6 +289,7 @@ CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -310,13 +317,21 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +# CONFIG_SCSI_SATA_SVW is not set +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +CONFIG_SCSI_SATA_VITESSE=y # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set @@ -326,7 +341,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set CONFIG_SCSI_QLOGIC_FC=y # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set CONFIG_SCSI_QLOGIC_1280=y @@ -337,6 +351,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -359,12 +374,16 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_EMC is not set # # Fusion MPT device support # CONFIG_FUSION=y -CONFIG_FUSION_MAX_SGE=40 +CONFIG_FUSION_SPI=y +CONFIG_FUSION_FC=m +CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set # @@ -387,7 +406,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -447,7 +465,6 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # ARCnet devices @@ -484,9 +501,7 @@ CONFIG_NET_PCI=y # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set CONFIG_E100=m -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -508,9 +523,11 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -568,25 +585,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -CONFIG_GAMEPORT=m -CONFIG_SOUND_GAMEPORT=m -# CONFIG_GAMEPORT_NS558 is not set -# CONFIG_GAMEPORT_L4 is not set -# CONFIG_GAMEPORT_EMU10K1 is not set -# CONFIG_GAMEPORT_VORTEX is not set -# CONFIG_GAMEPORT_FM801 is not set -# CONFIG_GAMEPORT_CS461x is not set -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -604,6 +602,23 @@ CONFIG_MOUSE_PS2=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +CONFIG_GAMEPORT=m +# CONFIG_GAMEPORT_NS558 is not set +# CONFIG_GAMEPORT_L4 is not set +# CONFIG_GAMEPORT_EMU10K1 is not set +# CONFIG_GAMEPORT_VORTEX is not set +# CONFIG_GAMEPORT_FM801 is not set +# CONFIG_GAMEPORT_CS461X is not set + +# # Character devices # CONFIG_VT=y @@ -613,11 +628,15 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_MOXA_SMARTIO is not set -# CONFIG_SYNCLINK is not set +# CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set # CONFIG_N_HDLC is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set # CONFIG_STALDRV is not set CONFIG_SGI_SNSC=y +CONFIG_SGI_TIOCX=y +CONFIG_SGI_MBCS=m # # Serial drivers @@ -639,6 +658,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_SGI_L1_CONSOLE=y CONFIG_SERIAL_SGI_IOC4=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -664,6 +684,7 @@ CONFIG_EFI_RTC=y CONFIG_AGP=m CONFIG_AGP_I460=m CONFIG_AGP_HP_ZX1=m +CONFIG_AGP_SGI_TIOCA=m CONFIG_DRM=m CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m @@ -675,9 +696,15 @@ CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # # CONFIG_I2C is not set @@ -761,6 +788,8 @@ CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y CONFIG_SND_CS4281=m CONFIG_SND_EMU10K1=m +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -785,13 +814,14 @@ CONFIG_SND_FM801=m # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set # # USB devices # # CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set # # Open Sound System @@ -801,6 +831,8 @@ CONFIG_SND_FM801=m # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set @@ -812,8 +844,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -822,6 +852,8 @@ CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set @@ -839,12 +871,11 @@ CONFIG_USB_UHCI_HCD=m # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set @@ -894,6 +925,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=m # # USB port drivers @@ -909,7 +941,6 @@ CONFIG_USB_HIDINPUT=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set @@ -918,6 +949,8 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -970,7 +1003,12 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# CONFIG_XFS_FS=y +CONFIG_XFS_EXPORT=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set @@ -1048,7 +1086,7 @@ CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m +CONFIG_EXPORTFS=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m @@ -1134,6 +1172,8 @@ CONFIG_NLS_UTF8=m # CONFIG_CRC_CCITT is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y # # HP Simulator drivers @@ -1150,14 +1190,17 @@ CONFIG_CRC32=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=20 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set @@ -1184,6 +1227,7 @@ CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index b8db6e3e5e81..11957598a8b9 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -156,10 +156,13 @@ */ #define DELAYED_RESOURCE_CNT 64 +#define PCI_DEVICE_ID_HP_SX2000_IOC 0x12ec + #define ZX1_IOC_ID ((PCI_DEVICE_ID_HP_ZX1_IOC << 16) | PCI_VENDOR_ID_HP) #define ZX2_IOC_ID ((PCI_DEVICE_ID_HP_ZX2_IOC << 16) | PCI_VENDOR_ID_HP) #define REO_IOC_ID ((PCI_DEVICE_ID_HP_REO_IOC << 16) | PCI_VENDOR_ID_HP) #define SX1000_IOC_ID ((PCI_DEVICE_ID_HP_SX1000_IOC << 16) | PCI_VENDOR_ID_HP) +#define SX2000_IOC_ID ((PCI_DEVICE_ID_HP_SX2000_IOC << 16) | PCI_VENDOR_ID_HP) #define ZX1_IOC_OFFSET 0x1000 /* ACPI reports SBA, we want IOC */ @@ -1726,6 +1729,7 @@ static struct ioc_iommu ioc_iommu_info[] __initdata = { { ZX1_IOC_ID, "zx1", ioc_zx1_init }, { ZX2_IOC_ID, "zx2", NULL }, { SX1000_IOC_ID, "sx1000", NULL }, + { SX2000_IOC_ID, "sx2000", NULL }, }; static struct ioc * __init diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c index ae84a1018a89..0639ec0ed015 100644 --- a/arch/ia64/hp/sim/simeth.c +++ b/arch/ia64/hp/sim/simeth.c @@ -191,7 +191,7 @@ simeth_probe1(void) unsigned char mac_addr[ETH_ALEN]; struct simeth_local *local; struct net_device *dev; - int fd, i, err; + int fd, i, err, rc; /* * XXX Fix me @@ -228,7 +228,9 @@ simeth_probe1(void) return err; } - dev->irq = assign_irq_vector(AUTO_ASSIGN); + if ((rc = assign_irq_vector(AUTO_ASSIGN)) < 0) + panic("%s: out of interrupt vectors!\n", __FUNCTION__); + dev->irq = rc; /* * attach the interrupt in the simulator, this does enable interrupts diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index 786e70718ce4..7dcb8582ae0d 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -30,6 +30,7 @@ #include <linux/module.h> #include <linux/serial.h> #include <linux/serialP.h> +#include <linux/sysrq.h> #include <asm/irq.h> #include <asm/hw_irq.h> @@ -149,12 +150,17 @@ static void receive_chars(struct tty_struct *tty, struct pt_regs *regs) seen_esc = 2; continue; } else if ( seen_esc == 2 ) { - if ( ch == 'P' ) show_state(); /* F1 key */ -#ifdef CONFIG_KDB - if ( ch == 'S' ) - kdb(KDB_REASON_KEYBOARD, 0, (kdb_eframe_t) regs); + if ( ch == 'P' ) /* F1 */ + show_state(); +#ifdef CONFIG_MAGIC_SYSRQ + if ( ch == 'S' ) { /* F4 */ + do + ch = ia64_ssc(0, 0, 0, 0, + SSC_GETCHAR); + while (!ch); + handle_sysrq(ch, regs, NULL); + } #endif - seen_esc = 0; continue; } @@ -976,7 +982,7 @@ static struct tty_operations hp_ops = { static int __init simrs_init (void) { - int i; + int i, rc; struct serial_state *state; if (!ia64_platform_is("hpsim")) @@ -1011,7 +1017,10 @@ simrs_init (void) if (state->type == PORT_UNKNOWN) continue; if (!state->irq) { - state->irq = assign_irq_vector(AUTO_ASSIGN); + if ((rc = assign_irq_vector(AUTO_ASSIGN)) < 0) + panic("%s: out of interrupt vectors!\n", + __FUNCTION__); + state->irq = rc; ia64_ssc_connect_irq(KEYBOARD_INTR, state->irq); } diff --git a/arch/ia64/ia32/ia32priv.h b/arch/ia64/ia32/ia32priv.h index b2de948bdaea..e3e9290e3ff2 100644 --- a/arch/ia64/ia32/ia32priv.h +++ b/arch/ia64/ia32/ia32priv.h @@ -241,7 +241,7 @@ typedef struct compat_siginfo { /* POSIX.1b timers */ struct { - timer_t _tid; /* timer id */ + compat_timer_t _tid; /* timer id */ int _overrun; /* overrun count */ char _pad[sizeof(unsigned int) - sizeof(int)]; compat_sigval_t _sigval; /* same as below */ diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index 4c73d8ba2e3d..e1fb68ddec26 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -17,9 +17,11 @@ obj-$(CONFIG_IA64_PALINFO) += palinfo.o obj-$(CONFIG_IOSAPIC) += iosapic.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_SMP) += smp.o smpboot.o domain.o +obj-$(CONFIG_NUMA) += numa.o obj-$(CONFIG_PERFMON) += perfmon_default_smpl.o obj-$(CONFIG_IA64_CYCLONE) += cyclone.o obj-$(CONFIG_IA64_MCA_RECOVERY) += mca_recovery.o +obj-$(CONFIG_KPROBES) += kprobes.o jprobes.o obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR) += uncached.o mca_recovery-y += mca_drv.o mca_drv_asm.o diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 72dfd9e7de0f..9609f243e5d0 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -11,6 +11,7 @@ * Copyright (C) 2001 Jenna Hall <jenna.s.hall@intel.com> * Copyright (C) 2001 Takayoshi Kochi <t-kochi@bq.jp.nec.com> * Copyright (C) 2002 Erich Focht <efocht@ess.nec.de> + * Copyright (C) 2004 Ashok Raj <ashok.raj@intel.com> * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * @@ -67,6 +68,11 @@ EXPORT_SYMBOL(pm_power_off); unsigned char acpi_kbd_controller_present = 1; unsigned char acpi_legacy_devices; +static unsigned int __initdata acpi_madt_rev; + +unsigned int acpi_cpei_override; +unsigned int acpi_cpei_phys_cpuid; + #define MAX_SAPICS 256 u16 ia64_acpiid_to_sapicid[MAX_SAPICS] = { [0 ... MAX_SAPICS - 1] = -1 }; @@ -236,9 +242,7 @@ acpi_parse_iosapic (acpi_table_entry_header *header, const unsigned long end) if (BAD_MADT_ENTRY(iosapic, end)) return -EINVAL; - iosapic_init(iosapic->address, iosapic->global_irq_base); - - return 0; + return iosapic_init(iosapic->address, iosapic->global_irq_base); } @@ -267,10 +271,56 @@ acpi_parse_plat_int_src ( (plintsrc->flags.trigger == 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); platform_intr_list[plintsrc->type] = vector; + if (acpi_madt_rev > 1) { + acpi_cpei_override = plintsrc->plint_flags.cpei_override_flag; + } + + /* + * Save the physical id, so we can check when its being removed + */ + acpi_cpei_phys_cpuid = ((plintsrc->id << 8) | (plintsrc->eid)) & 0xffff; + return 0; } +unsigned int can_cpei_retarget(void) +{ + extern int cpe_vector; + + /* + * Only if CPEI is supported and the override flag + * is present, otherwise return that its re-targettable + * if we are in polling mode. + */ + if (cpe_vector > 0 && !acpi_cpei_override) + return 0; + else + return 1; +} + +unsigned int is_cpu_cpei_target(unsigned int cpu) +{ + unsigned int logical_id; + + logical_id = cpu_logical_id(acpi_cpei_phys_cpuid); + + if (logical_id == cpu) + return 1; + else + return 0; +} + +void set_cpei_target_cpu(unsigned int cpu) +{ + acpi_cpei_phys_cpuid = cpu_physical_id(cpu); +} + +unsigned int get_cpei_target_cpu(void) +{ + return acpi_cpei_phys_cpuid; +} + static int __init acpi_parse_int_src_ovr ( acpi_table_entry_header *header, const unsigned long end) @@ -328,6 +378,8 @@ acpi_parse_madt (unsigned long phys_addr, unsigned long size) acpi_madt = (struct acpi_table_madt *) __va(phys_addr); + acpi_madt_rev = acpi_madt->header.revision; + /* remember the value for reference after free_initmem() */ #ifdef CONFIG_ITANIUM has_8259 = 1; /* Firmware on old Itanium systems is broken */ @@ -642,9 +694,11 @@ acpi_boot_init (void) if (smp_boot_data.cpu_phys_id[cpu] != hard_smp_processor_id()) node_cpuid[i++].phys_id = smp_boot_data.cpu_phys_id[cpu]; } - build_cpu_to_node_map(); # endif #endif +#ifdef CONFIG_ACPI_NUMA + build_cpu_to_node_map(); +#endif /* Make boot-up look pretty */ printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, total_cpus); return 0; @@ -772,7 +826,7 @@ EXPORT_SYMBOL(acpi_unmap_lsapic); #ifdef CONFIG_ACPI_NUMA -acpi_status __init +acpi_status __devinit acpi_map_iosapic (acpi_handle handle, u32 depth, void *context, void **ret) { struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; @@ -825,4 +879,28 @@ acpi_map_iosapic (acpi_handle handle, u32 depth, void *context, void **ret) return AE_OK; } #endif /* CONFIG_NUMA */ + +int +acpi_register_ioapic (acpi_handle handle, u64 phys_addr, u32 gsi_base) +{ + int err; + + if ((err = iosapic_init(phys_addr, gsi_base))) + return err; + +#if CONFIG_ACPI_NUMA + acpi_map_iosapic(handle, 0, NULL, NULL); +#endif /* CONFIG_ACPI_NUMA */ + + return 0; +} +EXPORT_SYMBOL(acpi_register_ioapic); + +int +acpi_unregister_ioapic (acpi_handle handle, u32 gsi_base) +{ + return iosapic_remove(gsi_base); +} +EXPORT_SYMBOL(acpi_unregister_ioapic); + #endif /* CONFIG_ACPI_BOOT */ diff --git a/arch/ia64/kernel/domain.c b/arch/ia64/kernel/domain.c index fe532c970438..d65e87b6394f 100644 --- a/arch/ia64/kernel/domain.c +++ b/arch/ia64/kernel/domain.c @@ -14,7 +14,7 @@ #include <linux/topology.h> #include <linux/nodemask.h> -#define SD_NODES_PER_DOMAIN 6 +#define SD_NODES_PER_DOMAIN 16 #ifdef CONFIG_NUMA /** @@ -27,7 +27,7 @@ * * Should use nodemask_t. */ -static int __devinit find_next_best_node(int node, unsigned long *used_nodes) +static int find_next_best_node(int node, unsigned long *used_nodes) { int i, n, val, min_val, best_node = 0; @@ -66,7 +66,7 @@ static int __devinit find_next_best_node(int node, unsigned long *used_nodes) * should be one that prevents unnecessary balancing, but also spreads tasks * out optimally. */ -static cpumask_t __devinit sched_domain_node_span(int node) +static cpumask_t sched_domain_node_span(int node) { int i; cpumask_t span, nodemask; @@ -96,7 +96,7 @@ static cpumask_t __devinit sched_domain_node_span(int node) #ifdef CONFIG_SCHED_SMT static DEFINE_PER_CPU(struct sched_domain, cpu_domains); static struct sched_group sched_group_cpus[NR_CPUS]; -static int __devinit cpu_to_cpu_group(int cpu) +static int cpu_to_cpu_group(int cpu) { return cpu; } @@ -104,7 +104,7 @@ static int __devinit cpu_to_cpu_group(int cpu) static DEFINE_PER_CPU(struct sched_domain, phys_domains); static struct sched_group sched_group_phys[NR_CPUS]; -static int __devinit cpu_to_phys_group(int cpu) +static int cpu_to_phys_group(int cpu) { #ifdef CONFIG_SCHED_SMT return first_cpu(cpu_sibling_map[cpu]); @@ -125,44 +125,36 @@ static struct sched_group *sched_group_nodes[MAX_NUMNODES]; static DEFINE_PER_CPU(struct sched_domain, allnodes_domains); static struct sched_group sched_group_allnodes[MAX_NUMNODES]; -static int __devinit cpu_to_allnodes_group(int cpu) +static int cpu_to_allnodes_group(int cpu) { return cpu_to_node(cpu); } #endif /* - * Set up scheduler domains and groups. Callers must hold the hotplug lock. + * Build sched domains for a given set of cpus and attach the sched domains + * to the individual cpus */ -void __devinit arch_init_sched_domains(void) +void build_sched_domains(const cpumask_t *cpu_map) { int i; - cpumask_t cpu_default_map; /* - * Setup mask for cpus without special case scheduling requirements. - * For now this just excludes isolated cpus, but could be used to - * exclude other special cases in the future. + * Set up domains for cpus specified by the cpu_map. */ - cpus_complement(cpu_default_map, cpu_isolated_map); - cpus_and(cpu_default_map, cpu_default_map, cpu_online_map); - - /* - * Set up domains. Isolated domains just stay on the dummy domain. - */ - for_each_cpu_mask(i, cpu_default_map) { + for_each_cpu_mask(i, *cpu_map) { int group; struct sched_domain *sd = NULL, *p; cpumask_t nodemask = node_to_cpumask(cpu_to_node(i)); - cpus_and(nodemask, nodemask, cpu_default_map); + cpus_and(nodemask, nodemask, *cpu_map); #ifdef CONFIG_NUMA if (num_online_cpus() > SD_NODES_PER_DOMAIN*cpus_weight(nodemask)) { sd = &per_cpu(allnodes_domains, i); *sd = SD_ALLNODES_INIT; - sd->span = cpu_default_map; + sd->span = *cpu_map; group = cpu_to_allnodes_group(i); sd->groups = &sched_group_allnodes[group]; p = sd; @@ -173,7 +165,7 @@ void __devinit arch_init_sched_domains(void) *sd = SD_NODE_INIT; sd->span = sched_domain_node_span(cpu_to_node(i)); sd->parent = p; - cpus_and(sd->span, sd->span, cpu_default_map); + cpus_and(sd->span, sd->span, *cpu_map); #endif p = sd; @@ -190,7 +182,7 @@ void __devinit arch_init_sched_domains(void) group = cpu_to_cpu_group(i); *sd = SD_SIBLING_INIT; sd->span = cpu_sibling_map[i]; - cpus_and(sd->span, sd->span, cpu_default_map); + cpus_and(sd->span, sd->span, *cpu_map); sd->parent = p; sd->groups = &sched_group_cpus[group]; #endif @@ -198,9 +190,9 @@ void __devinit arch_init_sched_domains(void) #ifdef CONFIG_SCHED_SMT /* Set up CPU (sibling) groups */ - for_each_cpu_mask(i, cpu_default_map) { + for_each_cpu_mask(i, *cpu_map) { cpumask_t this_sibling_map = cpu_sibling_map[i]; - cpus_and(this_sibling_map, this_sibling_map, cpu_default_map); + cpus_and(this_sibling_map, this_sibling_map, *cpu_map); if (i != first_cpu(this_sibling_map)) continue; @@ -213,7 +205,7 @@ void __devinit arch_init_sched_domains(void) for (i = 0; i < MAX_NUMNODES; i++) { cpumask_t nodemask = node_to_cpumask(i); - cpus_and(nodemask, nodemask, cpu_default_map); + cpus_and(nodemask, nodemask, *cpu_map); if (cpus_empty(nodemask)) continue; @@ -222,7 +214,7 @@ void __devinit arch_init_sched_domains(void) } #ifdef CONFIG_NUMA - init_sched_build_groups(sched_group_allnodes, cpu_default_map, + init_sched_build_groups(sched_group_allnodes, *cpu_map, &cpu_to_allnodes_group); for (i = 0; i < MAX_NUMNODES; i++) { @@ -233,12 +225,12 @@ void __devinit arch_init_sched_domains(void) cpumask_t covered = CPU_MASK_NONE; int j; - cpus_and(nodemask, nodemask, cpu_default_map); + cpus_and(nodemask, nodemask, *cpu_map); if (cpus_empty(nodemask)) continue; domainspan = sched_domain_node_span(i); - cpus_and(domainspan, domainspan, cpu_default_map); + cpus_and(domainspan, domainspan, *cpu_map); sg = kmalloc(sizeof(struct sched_group), GFP_KERNEL); sched_group_nodes[i] = sg; @@ -266,7 +258,7 @@ void __devinit arch_init_sched_domains(void) int n = (i + j) % MAX_NUMNODES; cpus_complement(notcovered, covered); - cpus_and(tmp, notcovered, cpu_default_map); + cpus_and(tmp, notcovered, *cpu_map); cpus_and(tmp, tmp, domainspan); if (cpus_empty(tmp)) break; @@ -293,7 +285,7 @@ void __devinit arch_init_sched_domains(void) #endif /* Calculate CPU power for physical packages and nodes */ - for_each_cpu_mask(i, cpu_default_map) { + for_each_cpu_mask(i, *cpu_map) { int power; struct sched_domain *sd; #ifdef CONFIG_SCHED_SMT @@ -359,13 +351,35 @@ next_sg: cpu_attach_domain(sd, i); } } +/* + * Set up scheduler domains and groups. Callers must hold the hotplug lock. + */ +void arch_init_sched_domains(const cpumask_t *cpu_map) +{ + cpumask_t cpu_default_map; + + /* + * Setup mask for cpus without special case scheduling requirements. + * For now this just excludes isolated cpus, but could be used to + * exclude other special cases in the future. + */ + cpus_andnot(cpu_default_map, *cpu_map, cpu_isolated_map); + + build_sched_domains(&cpu_default_map); +} -void __devinit arch_destroy_sched_domains(void) +void arch_destroy_sched_domains(const cpumask_t *cpu_map) { #ifdef CONFIG_NUMA int i; for (i = 0; i < MAX_NUMNODES; i++) { + cpumask_t nodemask = node_to_cpumask(i); struct sched_group *oldsg, *sg = sched_group_nodes[i]; + + cpus_and(nodemask, nodemask, *cpu_map); + if (cpus_empty(nodemask)) + continue; + if (sg == NULL) continue; sg = sg->next; diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index b1d5d3d5276c..9be53e1ea404 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -470,18 +470,6 @@ ENTRY(load_switch_stack) br.cond.sptk.many b7 END(load_switch_stack) -GLOBAL_ENTRY(__ia64_syscall) - .regstk 6,0,0,0 - mov r15=in5 // put syscall number in place - break __BREAK_SYSCALL - movl r2=errno - cmp.eq p6,p7=-1,r10 - ;; -(p6) st4 [r2]=r8 -(p6) mov r8=-1 - br.ret.sptk.many rp -END(__ia64_syscall) - GLOBAL_ENTRY(execve) mov r15=__NR_execve // put syscall number in place break __BREAK_SYSCALL @@ -637,7 +625,7 @@ END(ia64_ret_from_syscall) * r8-r11: restored (syscall return value(s)) * r12: restored (user-level stack pointer) * r13: restored (user-level thread pointer) - * r14: cleared + * r14: set to __kernel_syscall_via_epc * r15: restored (syscall #) * r16-r17: cleared * r18: user-level b6 @@ -658,7 +646,7 @@ END(ia64_ret_from_syscall) * pr: restored (user-level pr) * b0: restored (user-level rp) * b6: restored - * b7: cleared + * b7: set to __kernel_syscall_via_epc * ar.unat: restored (user-level ar.unat) * ar.pfs: restored (user-level ar.pfs) * ar.rsc: restored (user-level ar.rsc) @@ -704,72 +692,79 @@ ENTRY(ia64_leave_syscall) ;; (p6) ld4 r31=[r18] // load current_thread_info()->flags ld8 r19=[r2],PT(B6)-PT(LOADRS) // load ar.rsc value for "loadrs" - mov b7=r0 // clear b7 + nop.i 0 ;; - ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE) // load ar.bspstore (may be garbage) + mov r16=ar.bsp // M2 get existing backing store pointer ld8 r18=[r2],PT(R9)-PT(B6) // load b6 (p6) and r15=TIF_WORK_MASK,r31 // any work other than TIF_SYSCALL_TRACE? ;; - mov r16=ar.bsp // M2 get existing backing store pointer + ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE) // load ar.bspstore (may be garbage) (p6) cmp4.ne.unc p6,p0=r15, r0 // any special work pending? (p6) br.cond.spnt .work_pending_syscall ;; // start restoring the state saved on the kernel stack (struct pt_regs): ld8 r9=[r2],PT(CR_IPSR)-PT(R9) ld8 r11=[r3],PT(CR_IIP)-PT(R11) - mov f6=f0 // clear f6 +(pNonSys) break 0 // bug check: we shouldn't be here if pNonSys is TRUE! ;; invala // M0|1 invalidate ALAT - rsm psr.i | psr.ic // M2 initiate turning off of interrupt and interruption collection - mov f9=f0 // clear f9 + rsm psr.i | psr.ic // M2 turn off interrupts and interruption collection + cmp.eq p9,p0=r0,r0 // A set p9 to indicate that we should restore cr.ifs - ld8 r29=[r2],16 // load cr.ipsr - ld8 r28=[r3],16 // load cr.iip - mov f8=f0 // clear f8 + ld8 r29=[r2],16 // M0|1 load cr.ipsr + ld8 r28=[r3],16 // M0|1 load cr.iip + mov r22=r0 // A clear r22 ;; ld8 r30=[r2],16 // M0|1 load cr.ifs ld8 r25=[r3],16 // M0|1 load ar.unat - cmp.eq p9,p0=r0,r0 // set p9 to indicate that we should restore cr.ifs +(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13 ;; ld8 r26=[r2],PT(B0)-PT(AR_PFS) // M0|1 load ar.pfs -(pKStk) mov r22=psr // M2 read PSR now that interrupts are disabled - mov f10=f0 // clear f10 +(pKStk) mov r22=psr // M2 read PSR now that interrupts are disabled + nop 0 ;; - ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // load b0 - ld8 r27=[r3],PT(PR)-PT(AR_RSC) // load ar.rsc - mov f11=f0 // clear f11 + ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // M0|1 load b0 + ld8 r27=[r3],PT(PR)-PT(AR_RSC) // M0|1 load ar.rsc + mov f6=f0 // F clear f6 ;; - ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT) // load ar.rnat (may be garbage) - ld8 r31=[r3],PT(R1)-PT(PR) // load predicates -(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13 + ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT) // M0|1 load ar.rnat (may be garbage) + ld8 r31=[r3],PT(R1)-PT(PR) // M0|1 load predicates + mov f7=f0 // F clear f7 ;; - ld8 r20=[r2],PT(R12)-PT(AR_FPSR) // load ar.fpsr - ld8.fill r1=[r3],16 // load r1 -(pUStk) mov r17=1 + ld8 r20=[r2],PT(R12)-PT(AR_FPSR) // M0|1 load ar.fpsr + ld8.fill r1=[r3],16 // M0|1 load r1 +(pUStk) mov r17=1 // A ;; - srlz.d // M0 ensure interruption collection is off - ld8.fill r13=[r3],16 - mov f7=f0 // clear f7 +(pUStk) st1 [r14]=r17 // M2|3 + ld8.fill r13=[r3],16 // M0|1 + mov f8=f0 // F clear f8 ;; - ld8.fill r12=[r2] // restore r12 (sp) - mov.m ar.ssd=r0 // M2 clear ar.ssd - mov r22=r0 // clear r22 + ld8.fill r12=[r2] // M0|1 restore r12 (sp) + ld8.fill r15=[r3] // M0|1 restore r15 + mov b6=r18 // I0 restore b6 + + addl r17=THIS_CPU(ia64_phys_stacked_size_p8),r0 // A + mov f9=f0 // F clear f9 +(pKStk) br.cond.dpnt.many skip_rbs_switch // B - ld8.fill r15=[r3] // restore r15 -(pUStk) st1 [r14]=r17 - addl r3=THIS_CPU(ia64_phys_stacked_size_p8),r0 + srlz.d // M0 ensure interruption collection is off (for cover) + shr.u r18=r19,16 // I0|1 get byte size of existing "dirty" partition + cover // B add current frame into dirty partition & set cr.ifs ;; -(pUStk) ld4 r17=[r3] // r17 = cpu_data->phys_stacked_size_p8 - mov.m ar.csd=r0 // M2 clear ar.csd - mov b6=r18 // I0 restore b6 +(pUStk) ld4 r17=[r17] // M0|1 r17 = cpu_data->phys_stacked_size_p8 + mov r19=ar.bsp // M2 get new backing store pointer + mov f10=f0 // F clear f10 + + nop.m 0 + movl r14=__kernel_syscall_via_epc // X ;; - mov r14=r0 // clear r14 - shr.u r18=r19,16 // I0|1 get byte size of existing "dirty" partition -(pKStk) br.cond.dpnt.many skip_rbs_switch + mov.m ar.csd=r0 // M2 clear ar.csd + mov.m ar.ccv=r0 // M2 clear ar.ccv + mov b7=r14 // I0 clear b7 (hint with __kernel_syscall_via_epc) - mov.m ar.ccv=r0 // clear ar.ccv -(pNonSys) br.cond.dpnt.many dont_preserve_current_frame - br.cond.sptk.many rbs_switch + mov.m ar.ssd=r0 // M2 clear ar.ssd + mov f11=f0 // F clear f11 + br.cond.sptk.many rbs_switch // B END(ia64_leave_syscall) #ifdef CONFIG_IA32_SUPPORT @@ -885,7 +880,7 @@ GLOBAL_ENTRY(ia64_leave_kernel) ldf.fill f7=[r2],PT(F11)-PT(F7) ldf.fill f8=[r3],32 ;; - srlz.i // ensure interruption collection is off + srlz.d // ensure that inter. collection is off (VHPT is don't care, since text is pinned) mov ar.ccv=r15 ;; ldf.fill f11=[r2] @@ -945,11 +940,10 @@ GLOBAL_ENTRY(ia64_leave_kernel) * NOTE: alloc, loadrs, and cover can't be predicated. */ (pNonSys) br.cond.dpnt dont_preserve_current_frame - -rbs_switch: cover // add current frame into dirty partition and set cr.ifs ;; mov r19=ar.bsp // get new backing store pointer +rbs_switch: sub r16=r16,r18 // krbs = old bsp - size of dirty partition cmp.ne p9,p0=r0,r0 // clear p9 to skip restore of cr.ifs ;; @@ -1024,14 +1018,14 @@ rse_clear_invalid: mov loc5=0 mov loc6=0 mov loc7=0 -(pRecurse) br.call.sptk.few b0=rse_clear_invalid +(pRecurse) br.call.dptk.few b0=rse_clear_invalid ;; mov loc8=0 mov loc9=0 cmp.ne pReturn,p0=r0,in1 // if recursion count != 0, we need to do a br.ret mov loc10=0 mov loc11=0 -(pReturn) br.ret.sptk.many b0 +(pReturn) br.ret.dptk.many b0 #endif /* !CONFIG_ITANIUM */ # undef pRecurse # undef pReturn @@ -1255,7 +1249,7 @@ ENTRY(sys_rt_sigreturn) stf.spill [r17]=f11 adds out0=16,sp // out0 = &sigscratch br.call.sptk.many rp=ia64_rt_sigreturn -.ret19: .restore sp 0 +.ret19: .restore sp,0 adds sp=16,sp ;; ld8 r9=[sp] // load new ar.unat @@ -1577,11 +1571,11 @@ sys_call_table: data8 sys_add_key data8 sys_request_key data8 sys_keyctl + data8 sys_ioprio_set + data8 sys_ioprio_get // 1275 data8 sys_ni_syscall - data8 sys_ni_syscall // 1275 - data8 sys_set_zone_reclaim - data8 sys_ni_syscall - data8 sys_ni_syscall - data8 sys_ni_syscall + data8 sys_inotify_init + data8 sys_inotify_add_watch + data8 sys_inotify_rm_watch .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls diff --git a/arch/ia64/kernel/entry.h b/arch/ia64/kernel/entry.h index 6d4ecec989b5..78eeb0793419 100644 --- a/arch/ia64/kernel/entry.h +++ b/arch/ia64/kernel/entry.h @@ -60,7 +60,7 @@ .spillsp @priunat,SW(AR_UNAT)+16+(off); \ .spillsp ar.rnat,SW(AR_RNAT)+16+(off); \ .spillsp ar.bspstore,SW(AR_BSPSTORE)+16+(off); \ - .spillsp pr,SW(PR)+16+(off)) + .spillsp pr,SW(PR)+16+(off) #define DO_SAVE_SWITCH_STACK \ movl r28=1f; \ diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S index 962b6c4e32b5..7d7684a369d3 100644 --- a/arch/ia64/kernel/fsys.S +++ b/arch/ia64/kernel/fsys.S @@ -531,93 +531,114 @@ GLOBAL_ENTRY(fsys_bubble_down) .altrp b6 .body /* - * We get here for syscalls that don't have a lightweight handler. For those, we - * need to bubble down into the kernel and that requires setting up a minimal - * pt_regs structure, and initializing the CPU state more or less as if an - * interruption had occurred. To make syscall-restarts work, we setup pt_regs - * such that cr_iip points to the second instruction in syscall_via_break. - * Decrementing the IP hence will restart the syscall via break and not - * decrementing IP will return us to the caller, as usual. Note that we preserve - * the value of psr.pp rather than initializing it from dcr.pp. This makes it - * possible to distinguish fsyscall execution from other privileged execution. + * We get here for syscalls that don't have a lightweight + * handler. For those, we need to bubble down into the kernel + * and that requires setting up a minimal pt_regs structure, + * and initializing the CPU state more or less as if an + * interruption had occurred. To make syscall-restarts work, + * we setup pt_regs such that cr_iip points to the second + * instruction in syscall_via_break. Decrementing the IP + * hence will restart the syscall via break and not + * decrementing IP will return us to the caller, as usual. + * Note that we preserve the value of psr.pp rather than + * initializing it from dcr.pp. This makes it possible to + * distinguish fsyscall execution from other privileged + * execution. * * On entry: - * - normal fsyscall handler register usage, except that we also have: + * - normal fsyscall handler register usage, except + * that we also have: * - r18: address of syscall entry point * - r21: ar.fpsr * - r26: ar.pfs * - r27: ar.rsc * - r29: psr + * + * We used to clear some PSR bits here but that requires slow + * serialization. Fortuntely, that isn't really necessary. + * The rationale is as follows: we used to clear bits + * ~PSR_PRESERVED_BITS in PSR.L. Since + * PSR_PRESERVED_BITS==PSR.{UP,MFL,MFH,PK,DT,PP,SP,RT,IC}, we + * ended up clearing PSR.{BE,AC,I,DFL,DFH,DI,DB,SI,TB}. + * However, + * + * PSR.BE : already is turned off in __kernel_syscall_via_epc() + * PSR.AC : don't care (kernel normally turns PSR.AC on) + * PSR.I : already turned off by the time fsys_bubble_down gets + * invoked + * PSR.DFL: always 0 (kernel never turns it on) + * PSR.DFH: don't care --- kernel never touches f32-f127 on its own + * initiative + * PSR.DI : always 0 (kernel never turns it on) + * PSR.SI : always 0 (kernel never turns it on) + * PSR.DB : don't care --- kernel never enables kernel-level + * breakpoints + * PSR.TB : must be 0 already; if it wasn't zero on entry to + * __kernel_syscall_via_epc, the branch to fsys_bubble_down + * will trigger a taken branch; the taken-trap-handler then + * converts the syscall into a break-based system-call. */ -# define PSR_PRESERVED_BITS (IA64_PSR_UP | IA64_PSR_MFL | IA64_PSR_MFH | IA64_PSR_PK \ - | IA64_PSR_DT | IA64_PSR_PP | IA64_PSR_SP | IA64_PSR_RT \ - | IA64_PSR_IC) /* - * Reading psr.l gives us only bits 0-31, psr.it, and psr.mc. The rest we have - * to synthesize. + * Reading psr.l gives us only bits 0-31, psr.it, and psr.mc. + * The rest we have to synthesize. */ -# define PSR_ONE_BITS ((3 << IA64_PSR_CPL0_BIT) | (0x1 << IA64_PSR_RI_BIT) \ +# define PSR_ONE_BITS ((3 << IA64_PSR_CPL0_BIT) \ + | (0x1 << IA64_PSR_RI_BIT) \ | IA64_PSR_BN | IA64_PSR_I) - invala - movl r8=PSR_ONE_BITS + invala // M0|1 + movl r14=ia64_ret_from_syscall // X - mov r25=ar.unat // save ar.unat (5 cyc) - movl r9=PSR_PRESERVED_BITS + nop.m 0 + movl r28=__kernel_syscall_via_break // X create cr.iip + ;; - mov ar.rsc=0 // set enforced lazy mode, pl 0, little-endian, loadrs=0 - movl r28=__kernel_syscall_via_break + mov r2=r16 // A get task addr to addl-addressable register + adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16 // A + mov r31=pr // I0 save pr (2 cyc) ;; - mov r23=ar.bspstore // save ar.bspstore (12 cyc) - mov r31=pr // save pr (2 cyc) - mov r20=r1 // save caller's gp in r20 + st1 [r16]=r0 // M2|3 clear current->thread.on_ustack flag + addl r22=IA64_RBS_OFFSET,r2 // A compute base of RBS + add r3=TI_FLAGS+IA64_TASK_SIZE,r2 // A ;; - mov r2=r16 // copy current task addr to addl-addressable register - and r9=r9,r29 - mov r19=b6 // save b6 (2 cyc) + ld4 r3=[r3] // M0|1 r3 = current_thread_info()->flags + lfetch.fault.excl.nt1 [r22] // M0|1 prefetch register backing-store + nop.i 0 ;; - mov psr.l=r9 // slam the door (17 cyc to srlz.i) - or r29=r8,r29 // construct cr.ipsr value to save - addl r22=IA64_RBS_OFFSET,r2 // compute base of RBS + mov ar.rsc=0 // M2 set enforced lazy mode, pl 0, LE, loadrs=0 + nop.m 0 + nop.i 0 ;; - // GAS reports a spurious RAW hazard on the read of ar.rnat because it thinks - // we may be reading ar.itc after writing to psr.l. Avoid that message with - // this directive: - dv_serialize_data - mov.m r24=ar.rnat // read ar.rnat (5 cyc lat) - lfetch.fault.excl.nt1 [r22] - adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r2 - - // ensure previous insn group is issued before we stall for srlz.i: + mov r23=ar.bspstore // M2 (12 cyc) save ar.bspstore + mov.m r24=ar.rnat // M2 (5 cyc) read ar.rnat (dual-issues!) + nop.i 0 ;; - srlz.i // ensure new psr.l has been established - ///////////////////////////////////////////////////////////////////////////// - ////////// from this point on, execution is not interruptible anymore - ///////////////////////////////////////////////////////////////////////////// - addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2 // compute base of memory stack - cmp.ne pKStk,pUStk=r0,r0 // set pKStk <- 0, pUStk <- 1 + mov ar.bspstore=r22 // M2 (6 cyc) switch to kernel RBS + movl r8=PSR_ONE_BITS // X ;; - st1 [r16]=r0 // clear current->thread.on_ustack flag - mov ar.bspstore=r22 // switch to kernel RBS - mov b6=r18 // copy syscall entry-point to b6 (7 cyc) - add r3=TI_FLAGS+IA64_TASK_SIZE,r2 + mov r25=ar.unat // M2 (5 cyc) save ar.unat + mov r19=b6 // I0 save b6 (2 cyc) + mov r20=r1 // A save caller's gp in r20 ;; - ld4 r3=[r3] // r2 = current_thread_info()->flags - mov r18=ar.bsp // save (kernel) ar.bsp (12 cyc) - mov ar.rsc=0x3 // set eager mode, pl 0, little-endian, loadrs=0 - br.call.sptk.many b7=ia64_syscall_setup - ;; - ssm psr.i - movl r2=ia64_ret_from_syscall + or r29=r8,r29 // A construct cr.ipsr value to save + mov b6=r18 // I0 copy syscall entry-point to b6 (7 cyc) + addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2 // A compute base of memory stack + + mov r18=ar.bsp // M2 save (kernel) ar.bsp (12 cyc) + cmp.ne pKStk,pUStk=r0,r0 // A set pKStk <- 0, pUStk <- 1 + br.call.sptk.many b7=ia64_syscall_setup // B ;; - mov rp=r2 // set the real return addr - and r3=_TIF_SYSCALL_TRACEAUDIT,r3 + mov ar.rsc=0x3 // M2 set eager mode, pl 0, LE, loadrs=0 + mov rp=r14 // I0 set the real return addr + and r3=_TIF_SYSCALL_TRACEAUDIT,r3 // A ;; - cmp.eq p8,p0=r3,r0 + ssm psr.i // M2 we're on kernel stacks now, reenable irqs + cmp.eq p8,p0=r3,r0 // A +(p10) br.cond.spnt.many ia64_ret_from_syscall // B return if bad call-frame or r15 is a NaT -(p10) br.cond.spnt.many ia64_ret_from_syscall // p10==true means out registers are more than 8 -(p8) br.call.sptk.many b6=b6 // ignore this return addr - br.cond.sptk ia64_trace_syscall + nop.m 0 +(p8) br.call.sptk.many b6=b6 // B (ignore return address) + br.cond.spnt ia64_trace_syscall // B END(fsys_bubble_down) .rodata diff --git a/arch/ia64/kernel/gate.S b/arch/ia64/kernel/gate.S index facf75acdc85..86948ce63e43 100644 --- a/arch/ia64/kernel/gate.S +++ b/arch/ia64/kernel/gate.S @@ -72,38 +72,40 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc) * bundle get executed. The remaining code must be safe even if * they do not get executed. */ - adds r17=-1024,r15 - mov r10=0 // default to successful syscall execution - epc + adds r17=-1024,r15 // A + mov r10=0 // A default to successful syscall execution + epc // B causes split-issue } ;; - rsm psr.be // note: on McKinley "rsm psr.be/srlz.d" is slightly faster than "rum psr.be" - LOAD_FSYSCALL_TABLE(r14) - - mov r16=IA64_KR(CURRENT) // 12 cycle read latency - tnat.nz p10,p9=r15 - mov r19=NR_syscalls-1 + rsm psr.be | psr.i // M2 (5 cyc to srlz.d) + LOAD_FSYSCALL_TABLE(r14) // X ;; - shladd r18=r17,3,r14 - - srlz.d - cmp.ne p8,p0=r0,r0 // p8 <- FALSE - /* Note: if r17 is a NaT, p6 will be set to zero. */ - cmp.geu p6,p7=r19,r17 // (syscall > 0 && syscall < 1024+NR_syscalls)? - ;; -(p6) ld8 r18=[r18] - mov r21=ar.fpsr - add r14=-8,r14 // r14 <- addr of fsys_bubble_down entry - ;; -(p6) mov b7=r18 -(p6) tbit.z p8,p0=r18,0 -(p8) br.dptk.many b7 - -(p6) rsm psr.i - mov r27=ar.rsc - mov r26=ar.pfs + mov r16=IA64_KR(CURRENT) // M2 (12 cyc) + shladd r18=r17,3,r14 // A + mov r19=NR_syscalls-1 // A + ;; + lfetch [r18] // M0|1 + mov r29=psr // M2 (12 cyc) + // If r17 is a NaT, p6 will be zero + cmp.geu p6,p7=r19,r17 // A (sysnr > 0 && sysnr < 1024+NR_syscalls)? + ;; + mov r21=ar.fpsr // M2 (12 cyc) + tnat.nz p10,p9=r15 // I0 + mov.i r26=ar.pfs // I0 (would stall anyhow due to srlz.d...) + ;; + srlz.d // M0 (forces split-issue) ensure PSR.BE==0 +(p6) ld8 r18=[r18] // M0|1 + nop.i 0 + ;; + nop.m 0 +(p6) tbit.z.unc p8,p0=r18,0 // I0 (dual-issues with "mov b7=r18"!) + nop.i 0 ;; - mov r29=psr // read psr (12 cyc load latency) +(p8) ssm psr.i +(p6) mov b7=r18 // I0 +(p8) br.dptk.many b7 // B + + mov r27=ar.rsc // M2 (12 cyc) /* * brl.cond doesn't work as intended because the linker would convert this branch * into a branch to a PLT. Perhaps there will be a way to avoid this with some @@ -111,6 +113,8 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc) * instead. */ #ifdef CONFIG_ITANIUM +(p6) add r14=-8,r14 // r14 <- addr of fsys_bubble_down entry + ;; (p6) ld8 r14=[r14] // r14 <- fsys_bubble_down ;; (p6) mov b7=r14 @@ -118,7 +122,7 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc) #else BRL_COND_FSYS_BUBBLE_DOWN(p6) #endif - + ssm psr.i mov r10=-1 (p10) mov r8=EINVAL (p9) mov r8=ENOSYS diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c index 7bbf019c9867..01572814abe4 100644 --- a/arch/ia64/kernel/ia64_ksyms.c +++ b/arch/ia64/kernel/ia64_ksyms.c @@ -58,9 +58,6 @@ EXPORT_SYMBOL(__strlen_user); EXPORT_SYMBOL(__strncpy_from_user); EXPORT_SYMBOL(__strnlen_user); -#include <asm/unistd.h> -EXPORT_SYMBOL(__ia64_syscall); - /* from arch/ia64/lib */ extern void __divsi3(void); extern void __udivsi3(void); diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 88b014381df5..7936b62f7a2e 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -129,14 +129,13 @@ static struct iosapic { char __iomem *addr; /* base address of IOSAPIC */ unsigned int gsi_base; /* first GSI assigned to this IOSAPIC */ unsigned short num_rte; /* number of RTE in this IOSAPIC */ + int rtes_inuse; /* # of RTEs in use on this IOSAPIC */ #ifdef CONFIG_NUMA unsigned short node; /* numa node association via pxm */ #endif } iosapic_lists[NR_IOSAPICS]; -static int num_iosapic; - -static unsigned char pcat_compat __initdata; /* 8259 compatibility flag */ +static unsigned char pcat_compat __devinitdata; /* 8259 compatibility flag */ static int iosapic_kmalloc_ok; static LIST_HEAD(free_rte_list); @@ -149,7 +148,7 @@ find_iosapic (unsigned int gsi) { int i; - for (i = 0; i < num_iosapic; i++) { + for (i = 0; i < NR_IOSAPICS; i++) { if ((unsigned) (gsi - iosapic_lists[i].gsi_base) < iosapic_lists[i].num_rte) return i; } @@ -490,8 +489,6 @@ static int iosapic_find_sharable_vector (unsigned long trigger, unsigned long po } } } - if (vector < 0) - panic("%s: out of interrupt vectors!\n", __FUNCTION__); return vector; } @@ -507,6 +504,8 @@ iosapic_reassign_vector (int vector) if (!list_empty(&iosapic_intr_info[vector].rtes)) { new_vector = assign_irq_vector(AUTO_ASSIGN); + if (new_vector < 0) + panic("%s: out of interrupt vectors!\n", __FUNCTION__); printk(KERN_INFO "Reassigning vector %d to %d\n", vector, new_vector); memcpy(&iosapic_intr_info[new_vector], &iosapic_intr_info[vector], sizeof(struct iosapic_intr_info)); @@ -598,6 +597,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, rte->refcnt++; list_add_tail(&rte->rte_list, &iosapic_intr_info[vector].rtes); iosapic_intr_info[vector].count++; + iosapic_lists[index].rtes_inuse++; } else if (vector_is_shared(vector)) { struct iosapic_intr_info *info = &iosapic_intr_info[vector]; @@ -734,9 +734,12 @@ again: spin_unlock_irqrestore(&iosapic_lock, flags); /* If vector is running out, we try to find a sharable vector */ - vector = assign_irq_vector_nopanic(AUTO_ASSIGN); - if (vector < 0) + vector = assign_irq_vector(AUTO_ASSIGN); + if (vector < 0) { vector = iosapic_find_sharable_vector(trigger, polarity); + if (vector < 0) + panic("%s: out of interrupt vectors!\n", __FUNCTION__); + } spin_lock_irqsave(&irq_descp(vector)->lock, flags); spin_lock(&iosapic_lock); @@ -778,7 +781,7 @@ void iosapic_unregister_intr (unsigned int gsi) { unsigned long flags; - int irq, vector; + int irq, vector, index; irq_desc_t *idesc; u32 low32; unsigned long trigger, polarity; @@ -819,6 +822,9 @@ iosapic_unregister_intr (unsigned int gsi) list_del(&rte->rte_list); iosapic_intr_info[vector].count--; iosapic_free_rte(rte); + index = find_iosapic(gsi); + iosapic_lists[index].rtes_inuse--; + WARN_ON(iosapic_lists[index].rtes_inuse < 0); trigger = iosapic_intr_info[vector].trigger; polarity = iosapic_intr_info[vector].polarity; @@ -881,6 +887,8 @@ iosapic_register_platform_intr (u32 int_type, unsigned int gsi, break; case ACPI_INTERRUPT_INIT: vector = assign_irq_vector(AUTO_ASSIGN); + if (vector < 0) + panic("%s: out of interrupt vectors!\n", __FUNCTION__); delivery = IOSAPIC_INIT; break; case ACPI_INTERRUPT_CPEI: @@ -952,30 +960,86 @@ iosapic_system_init (int system_pcat_compat) } } -void __init +static inline int +iosapic_alloc (void) +{ + int index; + + for (index = 0; index < NR_IOSAPICS; index++) + if (!iosapic_lists[index].addr) + return index; + + printk(KERN_WARNING "%s: failed to allocate iosapic\n", __FUNCTION__); + return -1; +} + +static inline void +iosapic_free (int index) +{ + memset(&iosapic_lists[index], 0, sizeof(iosapic_lists[0])); +} + +static inline int +iosapic_check_gsi_range (unsigned int gsi_base, unsigned int ver) +{ + int index; + unsigned int gsi_end, base, end; + + /* check gsi range */ + gsi_end = gsi_base + ((ver >> 16) & 0xff); + for (index = 0; index < NR_IOSAPICS; index++) { + if (!iosapic_lists[index].addr) + continue; + + base = iosapic_lists[index].gsi_base; + end = base + iosapic_lists[index].num_rte - 1; + + if (gsi_base < base && gsi_end < base) + continue;/* OK */ + + if (gsi_base > end && gsi_end > end) + continue; /* OK */ + + return -EBUSY; + } + return 0; +} + +int __devinit iosapic_init (unsigned long phys_addr, unsigned int gsi_base) { - int num_rte; + int num_rte, err, index; unsigned int isa_irq, ver; char __iomem *addr; + unsigned long flags; - addr = ioremap(phys_addr, 0); - ver = iosapic_version(addr); + spin_lock_irqsave(&iosapic_lock, flags); + { + addr = ioremap(phys_addr, 0); + ver = iosapic_version(addr); - /* - * The MAX_REDIR register holds the highest input pin - * number (starting from 0). - * We add 1 so that we can use it for number of pins (= RTEs) - */ - num_rte = ((ver >> 16) & 0xff) + 1; + if ((err = iosapic_check_gsi_range(gsi_base, ver))) { + iounmap(addr); + spin_unlock_irqrestore(&iosapic_lock, flags); + return err; + } + + /* + * The MAX_REDIR register holds the highest input pin + * number (starting from 0). + * We add 1 so that we can use it for number of pins (= RTEs) + */ + num_rte = ((ver >> 16) & 0xff) + 1; - iosapic_lists[num_iosapic].addr = addr; - iosapic_lists[num_iosapic].gsi_base = gsi_base; - iosapic_lists[num_iosapic].num_rte = num_rte; + index = iosapic_alloc(); + iosapic_lists[index].addr = addr; + iosapic_lists[index].gsi_base = gsi_base; + iosapic_lists[index].num_rte = num_rte; #ifdef CONFIG_NUMA - iosapic_lists[num_iosapic].node = MAX_NUMNODES; + iosapic_lists[index].node = MAX_NUMNODES; #endif - num_iosapic++; + } + spin_unlock_irqrestore(&iosapic_lock, flags); if ((gsi_base == 0) && pcat_compat) { /* @@ -986,10 +1050,43 @@ iosapic_init (unsigned long phys_addr, unsigned int gsi_base) for (isa_irq = 0; isa_irq < 16; ++isa_irq) iosapic_override_isa_irq(isa_irq, isa_irq, IOSAPIC_POL_HIGH, IOSAPIC_EDGE); } + return 0; +} + +#ifdef CONFIG_HOTPLUG +int +iosapic_remove (unsigned int gsi_base) +{ + int index, err = 0; + unsigned long flags; + + spin_lock_irqsave(&iosapic_lock, flags); + { + index = find_iosapic(gsi_base); + if (index < 0) { + printk(KERN_WARNING "%s: No IOSAPIC for GSI base %u\n", + __FUNCTION__, gsi_base); + goto out; + } + + if (iosapic_lists[index].rtes_inuse) { + err = -EBUSY; + printk(KERN_WARNING "%s: IOSAPIC for GSI base %u is busy\n", + __FUNCTION__, gsi_base); + goto out; + } + + iounmap(iosapic_lists[index].addr); + iosapic_free(index); + } + out: + spin_unlock_irqrestore(&iosapic_lock, flags); + return err; } +#endif /* CONFIG_HOTPLUG */ #ifdef CONFIG_NUMA -void __init +void __devinit map_iosapic_to_node(unsigned int gsi_base, int node) { int index; diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c index 4fe60c7a2e90..6c4d59fd0364 100644 --- a/arch/ia64/kernel/irq_ia64.c +++ b/arch/ia64/kernel/irq_ia64.c @@ -63,30 +63,19 @@ EXPORT_SYMBOL(isa_irq_to_vector_map); static unsigned long ia64_vector_mask[BITS_TO_LONGS(IA64_NUM_DEVICE_VECTORS)]; int -assign_irq_vector_nopanic (int irq) +assign_irq_vector (int irq) { int pos, vector; again: pos = find_first_zero_bit(ia64_vector_mask, IA64_NUM_DEVICE_VECTORS); vector = IA64_FIRST_DEVICE_VECTOR + pos; if (vector > IA64_LAST_DEVICE_VECTOR) - return -1; + return -ENOSPC; if (test_and_set_bit(pos, ia64_vector_mask)) goto again; return vector; } -int -assign_irq_vector (int irq) -{ - int vector = assign_irq_vector_nopanic(irq); - - if (vector < 0) - panic("assign_irq_vector: out of interrupt vectors!"); - - return vector; -} - void free_irq_vector (int vector) { diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index d9c05d53435b..3bb3a13c4047 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -1,7 +1,7 @@ /* * arch/ia64/kernel/ivt.S * - * Copyright (C) 1998-2001, 2003 Hewlett-Packard Co + * Copyright (C) 1998-2001, 2003, 2005 Hewlett-Packard Co * Stephane Eranian <eranian@hpl.hp.com> * David Mosberger <davidm@hpl.hp.com> * Copyright (C) 2000, 2002-2003 Intel Co @@ -405,17 +405,22 @@ ENTRY(nested_dtlb_miss) * r30: continuation address * r31: saved pr * - * Clobbered: b0, r18, r19, r21, psr.dt (cleared) + * Clobbered: b0, r18, r19, r21, r22, psr.dt (cleared) */ rsm psr.dt // switch to using physical data addressing mov r19=IA64_KR(PT_BASE) // get the page table base address shl r21=r16,3 // shift bit 60 into sign bit + mov r18=cr.itir ;; shr.u r17=r16,61 // get the region number into r17 + extr.u r18=r18,2,6 // get the faulting page size ;; cmp.eq p6,p7=5,r17 // is faulting address in region 5? - shr.u r18=r16,PGDIR_SHIFT // get bits 33-63 of faulting address + add r22=-PAGE_SHIFT,r18 // adjustment for hugetlb address + add r18=PGDIR_SHIFT-PAGE_SHIFT,r18 ;; + shr.u r22=r16,r22 + shr.u r18=r16,r18 (p7) dep r17=r17,r19,(PAGE_SHIFT-3),3 // put region number bits in place srlz.d @@ -428,7 +433,7 @@ ENTRY(nested_dtlb_miss) (p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8 (p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8) cmp.eq p7,p6=0,r21 // unused address bits all zeroes? - shr.u r18=r16,PMD_SHIFT // shift L2 index into position + shr.u r18=r22,PMD_SHIFT // shift L2 index into position ;; ld8 r17=[r17] // fetch the L1 entry (may be 0) ;; @@ -436,7 +441,7 @@ ENTRY(nested_dtlb_miss) dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry ;; (p7) ld8 r17=[r17] // fetch the L2 entry (may be 0) - shr.u r19=r16,PAGE_SHIFT // shift L3 index into position + shr.u r19=r22,PAGE_SHIFT // shift L3 index into position ;; (p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L2 entry NULL? dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry @@ -687,82 +692,118 @@ ENTRY(break_fault) * to prevent leaking bits from kernel to user level. */ DBG_FAULT(11) - mov r16=IA64_KR(CURRENT) // r16 = current task; 12 cycle read lat. - mov r17=cr.iim - mov r18=__IA64_BREAK_SYSCALL - mov r21=ar.fpsr - mov r29=cr.ipsr - mov r19=b6 - mov r25=ar.unat - mov r27=ar.rsc - mov r26=ar.pfs - mov r28=cr.iip - mov r31=pr // prepare to save predicates - mov r20=r1 - ;; + mov.m r16=IA64_KR(CURRENT) // M2 r16 <- current task (12 cyc) + mov r29=cr.ipsr // M2 (12 cyc) + mov r31=pr // I0 (2 cyc) + + mov r17=cr.iim // M2 (2 cyc) + mov.m r27=ar.rsc // M2 (12 cyc) + mov r18=__IA64_BREAK_SYSCALL // A + + mov.m ar.rsc=0 // M2 + mov.m r21=ar.fpsr // M2 (12 cyc) + mov r19=b6 // I0 (2 cyc) + ;; + mov.m r23=ar.bspstore // M2 (12 cyc) + mov.m r24=ar.rnat // M2 (5 cyc) + mov.i r26=ar.pfs // I0 (2 cyc) + + invala // M0|1 + nop.m 0 // M + mov r20=r1 // A save r1 + + nop.m 0 + movl r30=sys_call_table // X + + mov r28=cr.iip // M2 (2 cyc) + cmp.eq p0,p7=r18,r17 // I0 is this a system call? +(p7) br.cond.spnt non_syscall // B no -> + // + // From this point on, we are definitely on the syscall-path + // and we can use (non-banked) scratch registers. + // +/////////////////////////////////////////////////////////////////////// + mov r1=r16 // A move task-pointer to "addl"-addressable reg + mov r2=r16 // A setup r2 for ia64_syscall_setup + add r9=TI_FLAGS+IA64_TASK_SIZE,r16 // A r9 = ¤t_thread_info()->flags + adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16 - cmp.eq p0,p7=r18,r17 // is this a system call? (p7 <- false, if so) -(p7) br.cond.spnt non_syscall + adds r15=-1024,r15 // A subtract 1024 from syscall number + mov r3=NR_syscalls - 1 ;; - ld1 r17=[r16] // load current->thread.on_ustack flag - st1 [r16]=r0 // clear current->thread.on_ustack flag - add r1=-IA64_TASK_THREAD_ON_USTACK_OFFSET,r16 // set r1 for MINSTATE_START_SAVE_MIN_VIRT + ld1.bias r17=[r16] // M0|1 r17 = current->thread.on_ustack flag + ld4 r9=[r9] // M0|1 r9 = current_thread_info()->flags + extr.u r8=r29,41,2 // I0 extract ei field from cr.ipsr + + shladd r30=r15,3,r30 // A r30 = sys_call_table + 8*(syscall-1024) + addl r22=IA64_RBS_OFFSET,r1 // A compute base of RBS + cmp.leu p6,p7=r15,r3 // A syscall number in range? ;; - invala - /* adjust return address so we skip over the break instruction: */ + lfetch.fault.excl.nt1 [r22] // M0|1 prefetch RBS +(p6) ld8 r30=[r30] // M0|1 load address of syscall entry point + tnat.nz.or p7,p0=r15 // I0 is syscall nr a NaT? - extr.u r8=r29,41,2 // extract ei field from cr.ipsr - ;; - cmp.eq p6,p7=2,r8 // isr.ei==2? - mov r2=r1 // setup r2 for ia64_syscall_setup - ;; -(p6) mov r8=0 // clear ei to 0 -(p6) adds r28=16,r28 // switch cr.iip to next bundle cr.ipsr.ei wrapped -(p7) adds r8=1,r8 // increment ei to next slot - ;; - cmp.eq pKStk,pUStk=r0,r17 // are we in kernel mode already? - dep r29=r8,r29,41,2 // insert new ei into cr.ipsr + mov.m ar.bspstore=r22 // M2 switch to kernel RBS + cmp.eq p8,p9=2,r8 // A isr.ei==2? ;; - // switch from user to kernel RBS: - MINSTATE_START_SAVE_MIN_VIRT - br.call.sptk.many b7=ia64_syscall_setup - ;; - MINSTATE_END_SAVE_MIN_VIRT // switch to bank 1 - ssm psr.ic | PSR_DEFAULT_BITS - ;; - srlz.i // guarantee that interruption collection is on - mov r3=NR_syscalls - 1 - ;; -(p15) ssm psr.i // restore psr.i - // p10==true means out registers are more than 8 or r15's Nat is true -(p10) br.cond.spnt.many ia64_ret_from_syscall - ;; - movl r16=sys_call_table +(p8) mov r8=0 // A clear ei to 0 +(p7) movl r30=sys_ni_syscall // X - adds r15=-1024,r15 // r15 contains the syscall number---subtract 1024 - movl r2=ia64_ret_from_syscall - ;; - shladd r20=r15,3,r16 // r20 = sys_call_table + 8*(syscall-1024) - cmp.leu p6,p7=r15,r3 // (syscall > 0 && syscall < 1024 + NR_syscalls) ? - mov rp=r2 // set the real return addr +(p8) adds r28=16,r28 // A switch cr.iip to next bundle +(p9) adds r8=1,r8 // A increment ei to next slot + nop.i 0 ;; -(p6) ld8 r20=[r20] // load address of syscall entry point -(p7) movl r20=sys_ni_syscall - add r2=TI_FLAGS+IA64_TASK_SIZE,r13 - ;; - ld4 r2=[r2] // r2 = current_thread_info()->flags - ;; - and r2=_TIF_SYSCALL_TRACEAUDIT,r2 // mask trace or audit + mov.m r25=ar.unat // M2 (5 cyc) + dep r29=r8,r29,41,2 // I0 insert new ei into cr.ipsr + adds r15=1024,r15 // A restore original syscall number + // + // If any of the above loads miss in L1D, we'll stall here until + // the data arrives. + // +/////////////////////////////////////////////////////////////////////// + st1 [r16]=r0 // M2|3 clear current->thread.on_ustack flag + mov b6=r30 // I0 setup syscall handler branch reg early + cmp.eq pKStk,pUStk=r0,r17 // A were we on kernel stacks already? + + and r9=_TIF_SYSCALL_TRACEAUDIT,r9 // A mask trace or audit + mov r18=ar.bsp // M2 (12 cyc) +(pKStk) br.cond.spnt .break_fixup // B we're already in kernel-mode -- fix up RBS + ;; +.back_from_break_fixup: +(pUStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1 // A compute base of memory stack + cmp.eq p14,p0=r9,r0 // A are syscalls being traced/audited? + br.call.sptk.many b7=ia64_syscall_setup // B +1: + mov ar.rsc=0x3 // M2 set eager mode, pl 0, LE, loadrs=0 + nop 0 + bsw.1 // B (6 cyc) regs are saved, switch to bank 1 ;; - cmp.eq p8,p0=r2,r0 - mov b6=r20 + + ssm psr.ic | PSR_DEFAULT_BITS // M2 now it's safe to re-enable intr.-collection + movl r3=ia64_ret_from_syscall // X ;; -(p8) br.call.sptk.many b6=b6 // ignore this return addr - br.cond.sptk ia64_trace_syscall + + srlz.i // M0 ensure interruption collection is on + mov rp=r3 // I0 set the real return addr +(p10) br.cond.spnt.many ia64_ret_from_syscall // B return if bad call-frame or r15 is a NaT + +(p15) ssm psr.i // M2 restore psr.i +(p14) br.call.sptk.many b6=b6 // B invoke syscall-handker (ignore return addr) + br.cond.spnt.many ia64_trace_syscall // B do syscall-tracing thingamagic // NOT REACHED +/////////////////////////////////////////////////////////////////////// + // On entry, we optimistically assumed that we're coming from user-space. + // For the rare cases where a system-call is done from within the kernel, + // we fix things up at this point: +.break_fixup: + add r1=-IA64_PT_REGS_SIZE,sp // A allocate space for pt_regs structure + mov ar.rnat=r24 // M2 restore kernel's AR.RNAT + ;; + mov ar.bspstore=r23 // M2 restore kernel's AR.BSPSTORE + br.cond.sptk .back_from_break_fixup END(break_fault) .org ia64_ivt+0x3000 @@ -837,8 +878,6 @@ END(interrupt) * - r31: saved pr * - b0: original contents (to be saved) * On exit: - * - executing on bank 1 registers - * - psr.ic enabled, interrupts restored * - p10: TRUE if syscall is invoked with more than 8 out * registers or r15's Nat is true * - r1: kernel's gp @@ -846,8 +885,11 @@ END(interrupt) * - r8: -EINVAL if p10 is true * - r12: points to kernel stack * - r13: points to current task + * - r14: preserved (same as on entry) + * - p13: preserved * - p15: TRUE if interrupts need to be re-enabled * - ar.fpsr: set to kernel settings + * - b6: preserved (same as on entry) */ GLOBAL_ENTRY(ia64_syscall_setup) #if PT(B6) != 0 @@ -915,10 +957,10 @@ GLOBAL_ENTRY(ia64_syscall_setup) (p13) mov in5=-1 ;; st8 [r16]=r21,PT(R8)-PT(AR_FPSR) // save ar.fpsr - tnat.nz p14,p0=in6 + tnat.nz p13,p0=in6 cmp.lt p10,p9=r11,r8 // frame size can't be more than local+8 ;; - stf8 [r16]=f1 // ensure pt_regs.r8 != 0 (see handle_syscall_error) + mov r8=1 (p9) tnat.nz p10,p0=r15 adds r12=-16,r1 // switch to kernel memory stack (with 16 bytes of scratch) @@ -929,9 +971,9 @@ GLOBAL_ENTRY(ia64_syscall_setup) mov r13=r2 // establish `current' movl r1=__gp // establish kernel global pointer ;; -(p14) mov in6=-1 + st8 [r16]=r8 // ensure pt_regs.r8 != 0 (see handle_syscall_error) +(p13) mov in6=-1 (p8) mov in7=-1 - nop.i 0 cmp.eq pSys,pNonSys=r0,r0 // set pSys=1, pNonSys=0 movl r17=FPSR_DEFAULT @@ -1002,6 +1044,8 @@ END(dispatch_illegal_op_fault) FAULT(17) ENTRY(non_syscall) + mov ar.rsc=r27 // restore ar.rsc before SAVE_MIN_WITH_COVER + ;; SAVE_MIN_WITH_COVER // There is no particular reason for this code to be here, other than that @@ -1199,6 +1243,25 @@ END(disabled_fp_reg) // 0x5600 Entry 26 (size 16 bundles) Nat Consumption (11,23,37,50) ENTRY(nat_consumption) DBG_FAULT(26) + + mov r16=cr.ipsr + mov r17=cr.isr + mov r31=pr // save PR + ;; + and r18=0xf,r17 // r18 = cr.ipsr.code{3:0} + tbit.z p6,p0=r17,IA64_ISR_NA_BIT + ;; + cmp.ne.or p6,p0=IA64_ISR_CODE_LFETCH,r18 + dep r16=-1,r16,IA64_PSR_ED_BIT,1 +(p6) br.cond.spnt 1f // branch if (cr.ispr.na == 0 || cr.ipsr.code{3:0} != LFETCH) + ;; + mov cr.ipsr=r16 // set cr.ipsr.na + mov pr=r31,-1 + ;; + rfi + +1: mov pr=r31,-1 + ;; FAULT(26) END(nat_consumption) diff --git a/arch/ia64/kernel/jprobes.S b/arch/ia64/kernel/jprobes.S new file mode 100644 index 000000000000..b7fa3ccd2b0f --- /dev/null +++ b/arch/ia64/kernel/jprobes.S @@ -0,0 +1,61 @@ +/* + * Jprobe specific operations + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) Intel Corporation, 2005 + * + * 2005-May Rusty Lynch <rusty.lynch@intel.com> and Anil S Keshavamurthy + * <anil.s.keshavamurthy@intel.com> initial implementation + * + * Jprobes (a.k.a. "jump probes" which is built on-top of kprobes) allow a + * probe to be inserted into the beginning of a function call. The fundamental + * difference between a jprobe and a kprobe is the jprobe handler is executed + * in the same context as the target function, while the kprobe handlers + * are executed in interrupt context. + * + * For jprobes we initially gain control by placing a break point in the + * first instruction of the targeted function. When we catch that specific + * break, we: + * * set the return address to our jprobe_inst_return() function + * * jump to the jprobe handler function + * + * Since we fixed up the return address, the jprobe handler will return to our + * jprobe_inst_return() function, giving us control again. At this point we + * are back in the parents frame marker, so we do yet another call to our + * jprobe_break() function to fix up the frame marker as it would normally + * exist in the target function. + * + * Our jprobe_return function then transfers control back to kprobes.c by + * executing a break instruction using one of our reserved numbers. When we + * catch that break in kprobes.c, we continue like we do for a normal kprobe + * by single stepping the emulated instruction, and then returning execution + * to the correct location. + */ +#include <asm/asmmacro.h> + + /* + * void jprobe_break(void) + */ +ENTRY(jprobe_break) + break.m 0x80300 +END(jprobe_break) + + /* + * void jprobe_inst_return(void) + */ +GLOBAL_ENTRY(jprobe_inst_return) + br.call.sptk.many b0=jprobe_break +END(jprobe_inst_return) diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c new file mode 100644 index 000000000000..884f5cd27d8a --- /dev/null +++ b/arch/ia64/kernel/kprobes.c @@ -0,0 +1,721 @@ +/* + * Kernel Probes (KProbes) + * arch/ia64/kernel/kprobes.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2002, 2004 + * Copyright (C) Intel Corporation, 2005 + * + * 2005-Apr Rusty Lynch <rusty.lynch@intel.com> and Anil S Keshavamurthy + * <anil.s.keshavamurthy@intel.com> adapted from i386 + */ + +#include <linux/config.h> +#include <linux/kprobes.h> +#include <linux/ptrace.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/preempt.h> +#include <linux/moduleloader.h> + +#include <asm/pgtable.h> +#include <asm/kdebug.h> +#include <asm/sections.h> + +extern void jprobe_inst_return(void); + +/* kprobe_status settings */ +#define KPROBE_HIT_ACTIVE 0x00000001 +#define KPROBE_HIT_SS 0x00000002 + +static struct kprobe *current_kprobe, *kprobe_prev; +static unsigned long kprobe_status, kprobe_status_prev; +static struct pt_regs jprobe_saved_regs; + +enum instruction_type {A, I, M, F, B, L, X, u}; +static enum instruction_type bundle_encoding[32][3] = { + { M, I, I }, /* 00 */ + { M, I, I }, /* 01 */ + { M, I, I }, /* 02 */ + { M, I, I }, /* 03 */ + { M, L, X }, /* 04 */ + { M, L, X }, /* 05 */ + { u, u, u }, /* 06 */ + { u, u, u }, /* 07 */ + { M, M, I }, /* 08 */ + { M, M, I }, /* 09 */ + { M, M, I }, /* 0A */ + { M, M, I }, /* 0B */ + { M, F, I }, /* 0C */ + { M, F, I }, /* 0D */ + { M, M, F }, /* 0E */ + { M, M, F }, /* 0F */ + { M, I, B }, /* 10 */ + { M, I, B }, /* 11 */ + { M, B, B }, /* 12 */ + { M, B, B }, /* 13 */ + { u, u, u }, /* 14 */ + { u, u, u }, /* 15 */ + { B, B, B }, /* 16 */ + { B, B, B }, /* 17 */ + { M, M, B }, /* 18 */ + { M, M, B }, /* 19 */ + { u, u, u }, /* 1A */ + { u, u, u }, /* 1B */ + { M, F, B }, /* 1C */ + { M, F, B }, /* 1D */ + { u, u, u }, /* 1E */ + { u, u, u }, /* 1F */ +}; + +/* + * In this function we check to see if the instruction + * is IP relative instruction and update the kprobe + * inst flag accordingly + */ +static void update_kprobe_inst_flag(uint template, uint slot, uint major_opcode, + unsigned long kprobe_inst, struct kprobe *p) +{ + p->ainsn.inst_flag = 0; + p->ainsn.target_br_reg = 0; + + if (bundle_encoding[template][slot] == B) { + switch (major_opcode) { + case INDIRECT_CALL_OPCODE: + p->ainsn.inst_flag |= INST_FLAG_FIX_BRANCH_REG; + p->ainsn.target_br_reg = ((kprobe_inst >> 6) & 0x7); + break; + case IP_RELATIVE_PREDICT_OPCODE: + case IP_RELATIVE_BRANCH_OPCODE: + p->ainsn.inst_flag |= INST_FLAG_FIX_RELATIVE_IP_ADDR; + break; + case IP_RELATIVE_CALL_OPCODE: + p->ainsn.inst_flag |= INST_FLAG_FIX_RELATIVE_IP_ADDR; + p->ainsn.inst_flag |= INST_FLAG_FIX_BRANCH_REG; + p->ainsn.target_br_reg = ((kprobe_inst >> 6) & 0x7); + break; + } + } else if (bundle_encoding[template][slot] == X) { + switch (major_opcode) { + case LONG_CALL_OPCODE: + p->ainsn.inst_flag |= INST_FLAG_FIX_BRANCH_REG; + p->ainsn.target_br_reg = ((kprobe_inst >> 6) & 0x7); + break; + } + } + return; +} + +/* + * In this function we check to see if the instruction + * on which we are inserting kprobe is supported. + * Returns 0 if supported + * Returns -EINVAL if unsupported + */ +static int unsupported_inst(uint template, uint slot, uint major_opcode, + unsigned long kprobe_inst, struct kprobe *p) +{ + unsigned long addr = (unsigned long)p->addr; + + if (bundle_encoding[template][slot] == I) { + switch (major_opcode) { + case 0x0: //I_UNIT_MISC_OPCODE: + /* + * Check for Integer speculation instruction + * - Bit 33-35 to be equal to 0x1 + */ + if (((kprobe_inst >> 33) & 0x7) == 1) { + printk(KERN_WARNING + "Kprobes on speculation inst at <0x%lx> not supported\n", + addr); + return -EINVAL; + } + + /* + * IP relative mov instruction + * - Bit 27-35 to be equal to 0x30 + */ + if (((kprobe_inst >> 27) & 0x1FF) == 0x30) { + printk(KERN_WARNING + "Kprobes on \"mov r1=ip\" at <0x%lx> not supported\n", + addr); + return -EINVAL; + + } + } + } + return 0; +} + + +/* + * In this function we check to see if the instruction + * (qp) cmpx.crel.ctype p1,p2=r2,r3 + * on which we are inserting kprobe is cmp instruction + * with ctype as unc. + */ +static uint is_cmp_ctype_unc_inst(uint template, uint slot, uint major_opcode, +unsigned long kprobe_inst) +{ + cmp_inst_t cmp_inst; + uint ctype_unc = 0; + + if (!((bundle_encoding[template][slot] == I) || + (bundle_encoding[template][slot] == M))) + goto out; + + if (!((major_opcode == 0xC) || (major_opcode == 0xD) || + (major_opcode == 0xE))) + goto out; + + cmp_inst.l = kprobe_inst; + if ((cmp_inst.f.x2 == 0) || (cmp_inst.f.x2 == 1)) { + /* Integere compare - Register Register (A6 type)*/ + if ((cmp_inst.f.tb == 0) && (cmp_inst.f.ta == 0) + &&(cmp_inst.f.c == 1)) + ctype_unc = 1; + } else if ((cmp_inst.f.x2 == 2)||(cmp_inst.f.x2 == 3)) { + /* Integere compare - Immediate Register (A8 type)*/ + if ((cmp_inst.f.ta == 0) &&(cmp_inst.f.c == 1)) + ctype_unc = 1; + } +out: + return ctype_unc; +} + +/* + * In this function we override the bundle with + * the break instruction at the given slot. + */ +static void prepare_break_inst(uint template, uint slot, uint major_opcode, + unsigned long kprobe_inst, struct kprobe *p) +{ + unsigned long break_inst = BREAK_INST; + bundle_t *bundle = &p->ainsn.insn.bundle; + + /* + * Copy the original kprobe_inst qualifying predicate(qp) + * to the break instruction iff !is_cmp_ctype_unc_inst + * because for cmp instruction with ctype equal to unc, + * which is a special instruction always needs to be + * executed regradless of qp + */ + if (!is_cmp_ctype_unc_inst(template, slot, major_opcode, kprobe_inst)) + break_inst |= (0x3f & kprobe_inst); + + switch (slot) { + case 0: + bundle->quad0.slot0 = break_inst; + break; + case 1: + bundle->quad0.slot1_p0 = break_inst; + bundle->quad1.slot1_p1 = break_inst >> (64-46); + break; + case 2: + bundle->quad1.slot2 = break_inst; + break; + } + + /* + * Update the instruction flag, so that we can + * emulate the instruction properly after we + * single step on original instruction + */ + update_kprobe_inst_flag(template, slot, major_opcode, kprobe_inst, p); +} + +static inline void get_kprobe_inst(bundle_t *bundle, uint slot, + unsigned long *kprobe_inst, uint *major_opcode) +{ + unsigned long kprobe_inst_p0, kprobe_inst_p1; + unsigned int template; + + template = bundle->quad0.template; + + switch (slot) { + case 0: + *major_opcode = (bundle->quad0.slot0 >> SLOT0_OPCODE_SHIFT); + *kprobe_inst = bundle->quad0.slot0; + break; + case 1: + *major_opcode = (bundle->quad1.slot1_p1 >> SLOT1_p1_OPCODE_SHIFT); + kprobe_inst_p0 = bundle->quad0.slot1_p0; + kprobe_inst_p1 = bundle->quad1.slot1_p1; + *kprobe_inst = kprobe_inst_p0 | (kprobe_inst_p1 << (64-46)); + break; + case 2: + *major_opcode = (bundle->quad1.slot2 >> SLOT2_OPCODE_SHIFT); + *kprobe_inst = bundle->quad1.slot2; + break; + } +} + +/* Returns non-zero if the addr is in the Interrupt Vector Table */ +static inline int in_ivt_functions(unsigned long addr) +{ + return (addr >= (unsigned long)__start_ivt_text + && addr < (unsigned long)__end_ivt_text); +} + +static int valid_kprobe_addr(int template, int slot, unsigned long addr) +{ + if ((slot > 2) || ((bundle_encoding[template][1] == L) && slot > 1)) { + printk(KERN_WARNING "Attempting to insert unaligned kprobe " + "at 0x%lx\n", addr); + return -EINVAL; + } + + if (in_ivt_functions(addr)) { + printk(KERN_WARNING "Kprobes can't be inserted inside " + "IVT functions at 0x%lx\n", addr); + return -EINVAL; + } + + if (slot == 1 && bundle_encoding[template][1] != L) { + printk(KERN_WARNING "Inserting kprobes on slot #1 " + "is not supported\n"); + return -EINVAL; + } + + return 0; +} + +static inline void save_previous_kprobe(void) +{ + kprobe_prev = current_kprobe; + kprobe_status_prev = kprobe_status; +} + +static inline void restore_previous_kprobe(void) +{ + current_kprobe = kprobe_prev; + kprobe_status = kprobe_status_prev; +} + +static inline void set_current_kprobe(struct kprobe *p) +{ + current_kprobe = p; +} + +static void kretprobe_trampoline(void) +{ +} + +/* + * At this point the target function has been tricked into + * returning into our trampoline. Lookup the associated instance + * and then: + * - call the handler function + * - cleanup by marking the instance as unused + * - long jump back to the original return address + */ +int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct kretprobe_instance *ri = NULL; + struct hlist_head *head; + struct hlist_node *node, *tmp; + unsigned long orig_ret_address = 0; + unsigned long trampoline_address = + ((struct fnptr *)kretprobe_trampoline)->ip; + + head = kretprobe_inst_table_head(current); + + /* + * It is possible to have multiple instances associated with a given + * task either because an multiple functions in the call path + * have a return probe installed on them, and/or more then one return + * return probe was registered for a target function. + * + * We can handle this because: + * - instances are always inserted at the head of the list + * - when multiple return probes are registered for the same + * function, the first instance's ret_addr will point to the + * real return address, and all the rest will point to + * kretprobe_trampoline + */ + hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { + if (ri->task != current) + /* another task is sharing our hash bucket */ + continue; + + if (ri->rp && ri->rp->handler) + ri->rp->handler(ri, regs); + + orig_ret_address = (unsigned long)ri->ret_addr; + recycle_rp_inst(ri); + + if (orig_ret_address != trampoline_address) + /* + * This is the real return address. Any other + * instances associated with this task are for + * other calls deeper on the call stack + */ + break; + } + + BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); + regs->cr_iip = orig_ret_address; + + unlock_kprobes(); + preempt_enable_no_resched(); + + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we have handled unlocking + * and re-enabling preemption. + */ + return 1; +} + +void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) +{ + struct kretprobe_instance *ri; + + if ((ri = get_free_rp_inst(rp)) != NULL) { + ri->rp = rp; + ri->task = current; + ri->ret_addr = (kprobe_opcode_t *)regs->b0; + + /* Replace the return addr with trampoline addr */ + regs->b0 = ((struct fnptr *)kretprobe_trampoline)->ip; + + add_rp_inst(ri); + } else { + rp->nmissed++; + } +} + +int arch_prepare_kprobe(struct kprobe *p) +{ + unsigned long addr = (unsigned long) p->addr; + unsigned long *kprobe_addr = (unsigned long *)(addr & ~0xFULL); + unsigned long kprobe_inst=0; + unsigned int slot = addr & 0xf, template, major_opcode = 0; + bundle_t *bundle = &p->ainsn.insn.bundle; + + memcpy(&p->opcode.bundle, kprobe_addr, sizeof(bundle_t)); + memcpy(&p->ainsn.insn.bundle, kprobe_addr, sizeof(bundle_t)); + + template = bundle->quad0.template; + + if(valid_kprobe_addr(template, slot, addr)) + return -EINVAL; + + /* Move to slot 2, if bundle is MLX type and kprobe slot is 1 */ + if (slot == 1 && bundle_encoding[template][1] == L) + slot++; + + /* Get kprobe_inst and major_opcode from the bundle */ + get_kprobe_inst(bundle, slot, &kprobe_inst, &major_opcode); + + if (unsupported_inst(template, slot, major_opcode, kprobe_inst, p)) + return -EINVAL; + + prepare_break_inst(template, slot, major_opcode, kprobe_inst, p); + + return 0; +} + +void arch_arm_kprobe(struct kprobe *p) +{ + unsigned long addr = (unsigned long)p->addr; + unsigned long arm_addr = addr & ~0xFULL; + + memcpy((char *)arm_addr, &p->ainsn.insn.bundle, sizeof(bundle_t)); + flush_icache_range(arm_addr, arm_addr + sizeof(bundle_t)); +} + +void arch_disarm_kprobe(struct kprobe *p) +{ + unsigned long addr = (unsigned long)p->addr; + unsigned long arm_addr = addr & ~0xFULL; + + /* p->opcode contains the original unaltered bundle */ + memcpy((char *) arm_addr, (char *) &p->opcode.bundle, sizeof(bundle_t)); + flush_icache_range(arm_addr, arm_addr + sizeof(bundle_t)); +} + +void arch_remove_kprobe(struct kprobe *p) +{ +} + +/* + * We are resuming execution after a single step fault, so the pt_regs + * structure reflects the register state after we executed the instruction + * located in the kprobe (p->ainsn.insn.bundle). We still need to adjust + * the ip to point back to the original stack address. To set the IP address + * to original stack address, handle the case where we need to fixup the + * relative IP address and/or fixup branch register. + */ +static void resume_execution(struct kprobe *p, struct pt_regs *regs) +{ + unsigned long bundle_addr = ((unsigned long) (&p->opcode.bundle)) & ~0xFULL; + unsigned long resume_addr = (unsigned long)p->addr & ~0xFULL; + unsigned long template; + int slot = ((unsigned long)p->addr & 0xf); + + template = p->opcode.bundle.quad0.template; + + if (slot == 1 && bundle_encoding[template][1] == L) + slot = 2; + + if (p->ainsn.inst_flag) { + + if (p->ainsn.inst_flag & INST_FLAG_FIX_RELATIVE_IP_ADDR) { + /* Fix relative IP address */ + regs->cr_iip = (regs->cr_iip - bundle_addr) + resume_addr; + } + + if (p->ainsn.inst_flag & INST_FLAG_FIX_BRANCH_REG) { + /* + * Fix target branch register, software convention is + * to use either b0 or b6 or b7, so just checking + * only those registers + */ + switch (p->ainsn.target_br_reg) { + case 0: + if ((regs->b0 == bundle_addr) || + (regs->b0 == bundle_addr + 0x10)) { + regs->b0 = (regs->b0 - bundle_addr) + + resume_addr; + } + break; + case 6: + if ((regs->b6 == bundle_addr) || + (regs->b6 == bundle_addr + 0x10)) { + regs->b6 = (regs->b6 - bundle_addr) + + resume_addr; + } + break; + case 7: + if ((regs->b7 == bundle_addr) || + (regs->b7 == bundle_addr + 0x10)) { + regs->b7 = (regs->b7 - bundle_addr) + + resume_addr; + } + break; + } /* end switch */ + } + goto turn_ss_off; + } + + if (slot == 2) { + if (regs->cr_iip == bundle_addr + 0x10) { + regs->cr_iip = resume_addr + 0x10; + } + } else { + if (regs->cr_iip == bundle_addr) { + regs->cr_iip = resume_addr; + } + } + +turn_ss_off: + /* Turn off Single Step bit */ + ia64_psr(regs)->ss = 0; +} + +static void prepare_ss(struct kprobe *p, struct pt_regs *regs) +{ + unsigned long bundle_addr = (unsigned long) &p->opcode.bundle; + unsigned long slot = (unsigned long)p->addr & 0xf; + + /* Update instruction pointer (IIP) and slot number (IPSR.ri) */ + regs->cr_iip = bundle_addr & ~0xFULL; + + if (slot > 2) + slot = 0; + + ia64_psr(regs)->ri = slot; + + /* turn on single stepping */ + ia64_psr(regs)->ss = 1; +} + +static int pre_kprobes_handler(struct die_args *args) +{ + struct kprobe *p; + int ret = 0; + struct pt_regs *regs = args->regs; + kprobe_opcode_t *addr = (kprobe_opcode_t *)instruction_pointer(regs); + + preempt_disable(); + + /* Handle recursion cases */ + if (kprobe_running()) { + p = get_kprobe(addr); + if (p) { + if (kprobe_status == KPROBE_HIT_SS) { + unlock_kprobes(); + goto no_kprobe; + } + /* We have reentered the pre_kprobe_handler(), since + * another probe was hit while within the handler. + * We here save the original kprobes variables and + * just single step on the instruction of the new probe + * without calling any user handlers. + */ + save_previous_kprobe(); + set_current_kprobe(p); + p->nmissed++; + prepare_ss(p, regs); + kprobe_status = KPROBE_REENTER; + return 1; + } else if (args->err == __IA64_BREAK_JPROBE) { + /* + * jprobe instrumented function just completed + */ + p = current_kprobe; + if (p->break_handler && p->break_handler(p, regs)) { + goto ss_probe; + } + } else { + /* Not our break */ + goto no_kprobe; + } + } + + lock_kprobes(); + p = get_kprobe(addr); + if (!p) { + unlock_kprobes(); + goto no_kprobe; + } + + kprobe_status = KPROBE_HIT_ACTIVE; + set_current_kprobe(p); + + if (p->pre_handler && p->pre_handler(p, regs)) + /* + * Our pre-handler is specifically requesting that we just + * do a return. This is used for both the jprobe pre-handler + * and the kretprobe trampoline + */ + return 1; + +ss_probe: + prepare_ss(p, regs); + kprobe_status = KPROBE_HIT_SS; + return 1; + +no_kprobe: + preempt_enable_no_resched(); + return ret; +} + +static int post_kprobes_handler(struct pt_regs *regs) +{ + if (!kprobe_running()) + return 0; + + if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { + kprobe_status = KPROBE_HIT_SSDONE; + current_kprobe->post_handler(current_kprobe, regs, 0); + } + + resume_execution(current_kprobe, regs); + + /*Restore back the original saved kprobes variables and continue. */ + if (kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(); + goto out; + } + + unlock_kprobes(); + +out: + preempt_enable_no_resched(); + return 1; +} + +static int kprobes_fault_handler(struct pt_regs *regs, int trapnr) +{ + if (!kprobe_running()) + return 0; + + if (current_kprobe->fault_handler && + current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + return 1; + + if (kprobe_status & KPROBE_HIT_SS) { + resume_execution(current_kprobe, regs); + unlock_kprobes(); + preempt_enable_no_resched(); + } + + return 0; +} + +int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, + void *data) +{ + struct die_args *args = (struct die_args *)data; + switch(val) { + case DIE_BREAK: + if (pre_kprobes_handler(args)) + return NOTIFY_STOP; + break; + case DIE_SS: + if (post_kprobes_handler(args->regs)) + return NOTIFY_STOP; + break; + case DIE_PAGE_FAULT: + if (kprobes_fault_handler(args->regs, args->trapnr)) + return NOTIFY_STOP; + default: + break; + } + return NOTIFY_DONE; +} + +int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct jprobe *jp = container_of(p, struct jprobe, kp); + unsigned long addr = ((struct fnptr *)(jp->entry))->ip; + + /* save architectural state */ + jprobe_saved_regs = *regs; + + /* after rfi, execute the jprobe instrumented function */ + regs->cr_iip = addr & ~0xFULL; + ia64_psr(regs)->ri = addr & 0xf; + regs->r1 = ((struct fnptr *)(jp->entry))->gp; + + /* + * fix the return address to our jprobe_inst_return() function + * in the jprobes.S file + */ + regs->b0 = ((struct fnptr *)(jprobe_inst_return))->ip; + + return 1; +} + +int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +{ + *regs = jprobe_saved_regs; + return 1; +} + +static struct kprobe trampoline_p = { + .pre_handler = trampoline_probe_handler +}; + +int __init arch_init_kprobes(void) +{ + trampoline_p.addr = + (kprobe_opcode_t *)((struct fnptr *)kretprobe_trampoline)->ip; + return register_kprobe(&trampoline_p); +} diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 736e328b5e61..4ebbf3974381 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -271,7 +271,7 @@ ia64_mca_log_sal_error_record(int sal_info_type) #ifdef CONFIG_ACPI -static int cpe_vector = -1; +int cpe_vector = -1; static irqreturn_t ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs) diff --git a/arch/ia64/kernel/numa.c b/arch/ia64/kernel/numa.c new file mode 100644 index 000000000000..a68ce6678092 --- /dev/null +++ b/arch/ia64/kernel/numa.c @@ -0,0 +1,57 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ia64 kernel NUMA specific stuff + * + * Copyright (C) 2002 Erich Focht <efocht@ess.nec.de> + * Copyright (C) 2004 Silicon Graphics, Inc. + * Jesse Barnes <jbarnes@sgi.com> + */ +#include <linux/config.h> +#include <linux/topology.h> +#include <linux/module.h> +#include <asm/processor.h> +#include <asm/smp.h> + +u8 cpu_to_node_map[NR_CPUS] __cacheline_aligned; +EXPORT_SYMBOL(cpu_to_node_map); + +cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned; + +/** + * build_cpu_to_node_map - setup cpu to node and node to cpumask arrays + * + * Build cpu to node mapping and initialize the per node cpu masks using + * info from the node_cpuid array handed to us by ACPI. + */ +void __init build_cpu_to_node_map(void) +{ + int cpu, i, node; + + for(node=0; node < MAX_NUMNODES; node++) + cpus_clear(node_to_cpu_mask[node]); + + for(cpu = 0; cpu < NR_CPUS; ++cpu) { + node = -1; + for (i = 0; i < NR_CPUS; ++i) + if (cpu_physical_id(cpu) == node_cpuid[i].phys_id) { + node = node_cpuid[i].nid; + break; + } + cpu_to_node_map[cpu] = (node >= 0) ? node : 0; + if (node >= 0) + cpu_set(cpu, node_to_cpu_mask[node]); + } +} diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 6407bff6bfd7..b8ebb8e427ef 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -37,7 +37,6 @@ #include <linux/vfs.h> #include <linux/pagemap.h> #include <linux/mount.h> -#include <linux/version.h> #include <linux/bitops.h> #include <asm/errno.h> diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index ebb71f3d6d19..051e050359e4 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -27,6 +27,7 @@ #include <linux/efi.h> #include <linux/interrupt.h> #include <linux/delay.h> +#include <linux/kprobes.h> #include <asm/cpu.h> #include <asm/delay.h> @@ -178,7 +179,7 @@ static int can_do_pal_halt = 1; static int __init nohalt_setup(char * str) { - pal_halt = 0; + pal_halt = can_do_pal_halt = 0; return 1; } __setup("nohalt", nohalt_setup); @@ -195,6 +196,7 @@ update_pal_halt_status(int status) void default_idle (void) { + local_irq_enable(); while (!need_resched()) if (can_do_pal_halt) safe_halt(); @@ -707,6 +709,13 @@ kernel_thread_helper (int (*fn)(void *), void *arg) void flush_thread (void) { + /* + * Remove function-return probe instances associated with this task + * and put them back on the free list. Do not insert an exit probe for + * this function, it will be disabled by kprobe_flush_task if you do. + */ + kprobe_flush_task(current); + /* drop floating-point and debug-register state if it exists: */ current->thread.flags &= ~(IA64_THREAD_FPH_VALID | IA64_THREAD_DBG_VALID); ia64_drop_fpu(current); @@ -721,6 +730,14 @@ flush_thread (void) void exit_thread (void) { + + /* + * Remove function-return probe instances associated with this task + * and put them back on the free list. Do not insert an exit probe for + * this function, it will be disabled by kprobe_flush_task if you do. + */ + kprobe_flush_task(current); + ia64_drop_fpu(current); #ifdef CONFIG_PERFMON /* if needed, stop monitoring and flush state to perfmon context */ @@ -790,16 +807,12 @@ machine_restart (char *restart_cmd) (*efi.reset_system)(EFI_RESET_WARM, 0, 0, NULL); } -EXPORT_SYMBOL(machine_restart); - void machine_halt (void) { cpu_halt(); } -EXPORT_SYMBOL(machine_halt); - void machine_power_off (void) { @@ -808,4 +821,3 @@ machine_power_off (void) machine_halt(); } -EXPORT_SYMBOL(machine_power_off); diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 575a8f657b31..bbb8bc7c0552 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -725,12 +725,32 @@ convert_to_non_syscall (struct task_struct *child, struct pt_regs *pt, break; } + /* + * Note: at the time of this call, the target task is blocked + * in notify_resume_user() and by clearling PRED_LEAVE_SYSCALL + * (aka, "pLvSys") we redirect execution from + * .work_pending_syscall_end to .work_processed_kernel. + */ unw_get_pr(&prev_info, &pr); - pr &= ~(1UL << PRED_SYSCALL); + pr &= ~((1UL << PRED_SYSCALL) | (1UL << PRED_LEAVE_SYSCALL)); pr |= (1UL << PRED_NON_SYSCALL); unw_set_pr(&prev_info, pr); pt->cr_ifs = (1UL << 63) | cfm; + /* + * Clear the memory that is NOT written on syscall-entry to + * ensure we do not leak kernel-state to user when execution + * resumes. + */ + pt->r2 = 0; + pt->r3 = 0; + pt->r14 = 0; + memset(&pt->r16, 0, 16*8); /* clear r16-r31 */ + memset(&pt->f6, 0, 6*16); /* clear f6-f11 */ + pt->b7 = 0; + pt->ar_ccv = 0; + pt->ar_csd = 0; + pt->ar_ssd = 0; } static int @@ -945,6 +965,13 @@ access_uarea (struct task_struct *child, unsigned long addr, *data = (pt->cr_ipsr & IPSR_MASK); return 0; + case PT_AR_RSC: + if (write_access) + pt->ar_rsc = *data | (3 << 2); /* force PL3 */ + else + *data = pt->ar_rsc; + return 0; + case PT_AR_RNAT: urbs_end = ia64_get_user_rbs_end(child, pt, NULL); rnat_addr = (long) ia64_rse_rnat_addr((long *) @@ -996,9 +1023,6 @@ access_uarea (struct task_struct *child, unsigned long addr, case PT_AR_BSPSTORE: ptr = pt_reg_addr(pt, ar_bspstore); break; - case PT_AR_RSC: - ptr = pt_reg_addr(pt, ar_rsc); - break; case PT_AR_UNAT: ptr = pt_reg_addr(pt, ar_unat); break; @@ -1234,7 +1258,7 @@ ptrace_getregs (struct task_struct *child, struct pt_all_user_regs __user *ppr) static long ptrace_setregs (struct task_struct *child, struct pt_all_user_regs __user *ppr) { - unsigned long psr, ec, lc, rnat, bsp, cfm, nat_bits, val = 0; + unsigned long psr, rsc, ec, lc, rnat, bsp, cfm, nat_bits, val = 0; struct unw_frame_info info; struct switch_stack *sw; struct ia64_fpreg fpval; @@ -1267,7 +1291,7 @@ ptrace_setregs (struct task_struct *child, struct pt_all_user_regs __user *ppr) /* app regs */ retval |= __get_user(pt->ar_pfs, &ppr->ar[PT_AUR_PFS]); - retval |= __get_user(pt->ar_rsc, &ppr->ar[PT_AUR_RSC]); + retval |= __get_user(rsc, &ppr->ar[PT_AUR_RSC]); retval |= __get_user(pt->ar_bspstore, &ppr->ar[PT_AUR_BSPSTORE]); retval |= __get_user(pt->ar_unat, &ppr->ar[PT_AUR_UNAT]); retval |= __get_user(pt->ar_ccv, &ppr->ar[PT_AUR_CCV]); @@ -1365,6 +1389,7 @@ ptrace_setregs (struct task_struct *child, struct pt_all_user_regs __user *ppr) retval |= __get_user(nat_bits, &ppr->nat); retval |= access_uarea(child, PT_CR_IPSR, &psr, 1); + retval |= access_uarea(child, PT_AR_RSC, &rsc, 1); retval |= access_uarea(child, PT_AR_EC, &ec, 1); retval |= access_uarea(child, PT_AR_LC, &lc, 1); retval |= access_uarea(child, PT_AR_RNAT, &rnat, 1); diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index d14692e0920a..84f89da7c640 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -20,6 +20,7 @@ * 02/01/00 R.Seth fixed get_cpuinfo for SMP * 01/07/99 S.Eranian added the support for command line argument * 06/24/99 W.Drummond added boot_cpu_data. + * 05/28/05 Z. Menyhart Dynamic stride size for "flush_icache_range()" */ #include <linux/config.h> #include <linux/module.h> @@ -40,6 +41,8 @@ #include <linux/serial_core.h> #include <linux/efi.h> #include <linux/initrd.h> +#include <linux/platform.h> +#include <linux/pm.h> #include <asm/ia32.h> #include <asm/machvec.h> @@ -72,6 +75,8 @@ DEFINE_PER_CPU(unsigned long, ia64_phys_stacked_size_p8); unsigned long ia64_cycles_per_usec; struct ia64_boot_param *ia64_boot_param; struct screen_info screen_info; +unsigned long vga_console_iobase; +unsigned long vga_console_membase; unsigned long ia64_max_cacheline_size; unsigned long ia64_iobase; /* virtual address for I/O accesses */ @@ -81,6 +86,13 @@ EXPORT_SYMBOL(io_space); unsigned int num_io_spaces; /* + * "flush_icache_range()" needs to know what processor dependent stride size to use + * when it makes i-cache(s) coherent with d-caches. + */ +#define I_CACHE_STRIDE_SHIFT 5 /* Safest way to go: 32 bytes by 32 bytes */ +unsigned long ia64_i_cache_stride_shift = ~0; + +/* * The merge_mask variable needs to be set to (max(iommu_page_size(iommu)) - 1). This * mask specifies a mask of address bits that must be 0 in order for two buffers to be * mergeable by the I/O MMU (i.e., the end address of the first buffer and the start @@ -273,23 +285,25 @@ io_port_init (void) static inline int __init early_console_setup (char *cmdline) { + int earlycons = 0; + #ifdef CONFIG_SERIAL_SGI_L1_CONSOLE { extern int sn_serial_console_early_setup(void); if (!sn_serial_console_early_setup()) - return 0; + earlycons++; } #endif #ifdef CONFIG_EFI_PCDP if (!efi_setup_pcdp_console(cmdline)) - return 0; + earlycons++; #endif #ifdef CONFIG_SERIAL_8250_CONSOLE if (!early_serial_console_init(cmdline)) - return 0; + earlycons++; #endif - return -1; + return (earlycons) ? 0 : -1; } static inline void @@ -622,6 +636,12 @@ setup_per_cpu_areas (void) /* start_kernel() requires this... */ } +/* + * Calculate the max. cache line size. + * + * In addition, the minimum of the i-cache stride sizes is calculated for + * "flush_icache_range()". + */ static void get_max_cacheline_size (void) { @@ -635,6 +655,8 @@ get_max_cacheline_size (void) printk(KERN_ERR "%s: ia64_pal_cache_summary() failed (status=%ld)\n", __FUNCTION__, status); max = SMP_CACHE_BYTES; + /* Safest setup for "flush_icache_range()" */ + ia64_i_cache_stride_shift = I_CACHE_STRIDE_SHIFT; goto out; } @@ -643,14 +665,31 @@ get_max_cacheline_size (void) &cci); if (status != 0) { printk(KERN_ERR - "%s: ia64_pal_cache_config_info(l=%lu) failed (status=%ld)\n", + "%s: ia64_pal_cache_config_info(l=%lu, 2) failed (status=%ld)\n", __FUNCTION__, l, status); max = SMP_CACHE_BYTES; + /* The safest setup for "flush_icache_range()" */ + cci.pcci_stride = I_CACHE_STRIDE_SHIFT; + cci.pcci_unified = 1; } line_size = 1 << cci.pcci_line_size; if (line_size > max) max = line_size; - } + if (!cci.pcci_unified) { + status = ia64_pal_cache_config_info(l, + /* cache_type (instruction)= */ 1, + &cci); + if (status != 0) { + printk(KERN_ERR + "%s: ia64_pal_cache_config_info(l=%lu, 1) failed (status=%ld)\n", + __FUNCTION__, l, status); + /* The safest setup for "flush_icache_range()" */ + cci.pcci_stride = I_CACHE_STRIDE_SHIFT; + } + } + if (cci.pcci_stride < ia64_i_cache_stride_shift) + ia64_i_cache_stride_shift = cci.pcci_stride; + } out: if (max > ia64_max_cacheline_size) ia64_max_cacheline_size = max; @@ -779,6 +818,7 @@ cpu_init (void) /* size of physical stacked register partition plus 8 bytes: */ __get_cpu_var(ia64_phys_stacked_size_p8) = num_phys_stacked*8 + 8; platform_cpu_init(); + pm_idle = default_idle; } void diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c index 499b7e5317cf..b8a0a7d257a9 100644 --- a/arch/ia64/kernel/signal.c +++ b/arch/ia64/kernel/signal.c @@ -94,7 +94,7 @@ sys_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, long arg2, static long restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr) { - unsigned long ip, flags, nat, um, cfm; + unsigned long ip, flags, nat, um, cfm, rsc; long err; /* Always make any pending restarted system calls return -EINTR */ @@ -106,7 +106,7 @@ restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr) err |= __get_user(ip, &sc->sc_ip); /* instruction pointer */ err |= __get_user(cfm, &sc->sc_cfm); err |= __get_user(um, &sc->sc_um); /* user mask */ - err |= __get_user(scr->pt.ar_rsc, &sc->sc_ar_rsc); + err |= __get_user(rsc, &sc->sc_ar_rsc); err |= __get_user(scr->pt.ar_unat, &sc->sc_ar_unat); err |= __get_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr); err |= __get_user(scr->pt.ar_pfs, &sc->sc_ar_pfs); @@ -119,6 +119,7 @@ restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr) err |= __copy_from_user(&scr->pt.r15, &sc->sc_gr[15], 8); /* r15 */ scr->pt.cr_ifs = cfm | (1UL << 63); + scr->pt.ar_rsc = rsc | (3 << 2); /* force PL3 */ /* establish new instruction pointer: */ scr->pt.cr_iip = ip & ~0x3UL; @@ -142,6 +143,7 @@ restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr) __copy_from_user(current->thread.fph, &sc->sc_fr[32], 96*16); psr->mfh = 0; /* drop signal handler's fph contents... */ + preempt_disable(); if (psr->dfh) ia64_drop_fpu(current); else { @@ -149,6 +151,7 @@ restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr) __ia64_load_fpu(current->thread.fph); ia64_set_local_fpu_owner(current); } + preempt_enable(); } return err; } diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c index 953095e2ce15..0166a9847095 100644 --- a/arch/ia64/kernel/smp.c +++ b/arch/ia64/kernel/smp.c @@ -231,13 +231,16 @@ smp_flush_tlb_all (void) void smp_flush_tlb_mm (struct mm_struct *mm) { + preempt_disable(); /* this happens for the common case of a single-threaded fork(): */ if (likely(mm == current->active_mm && atomic_read(&mm->mm_users) == 1)) { local_finish_flush_tlb_mm(mm); + preempt_enable(); return; } + preempt_enable(); /* * We could optimize this further by using mm->cpu_vm_mask to track which CPUs * have been running in the address space. It's not clear that this is worth the @@ -269,7 +272,7 @@ smp_call_function_single (int cpuid, void (*func) (void *info), void *info, int int me = get_cpu(); /* prevent preemption and reschedule on another processor */ if (cpuid == me) { - printk("%s: trying to call self\n", __FUNCTION__); + printk(KERN_INFO "%s: trying to call self\n", __FUNCTION__); put_cpu(); return -EBUSY; } diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 3865f088ffa2..7d72c0d872b3 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -346,6 +346,7 @@ smp_callin (void) lock_ipi_calllock(); cpu_set(cpuid, cpu_online_map); unlock_ipi_calllock(); + per_cpu(cpu_state, cpuid) = CPU_ONLINE; smp_setup_percpu_timer(); @@ -524,47 +525,6 @@ smp_build_cpu_map (void) } } -#ifdef CONFIG_NUMA - -/* on which node is each logical CPU (one cacheline even for 64 CPUs) */ -u8 cpu_to_node_map[NR_CPUS] __cacheline_aligned; -EXPORT_SYMBOL(cpu_to_node_map); -/* which logical CPUs are on which nodes */ -cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned; - -/* - * Build cpu to node mapping and initialize the per node cpu masks. - */ -void __init -build_cpu_to_node_map (void) -{ - int cpu, i, node; - - for(node=0; node<MAX_NUMNODES; node++) - cpus_clear(node_to_cpu_mask[node]); - for(cpu = 0; cpu < NR_CPUS; ++cpu) { - /* - * All Itanium NUMA platforms I know use ACPI, so maybe we - * can drop this ifdef completely. [EF] - */ -#ifdef CONFIG_ACPI_NUMA - node = -1; - for (i = 0; i < NR_CPUS; ++i) - if (cpu_physical_id(cpu) == node_cpuid[i].phys_id) { - node = node_cpuid[i].nid; - break; - } -#else -# error Fixme: Dunno how to build CPU-to-node map. -#endif - cpu_to_node_map[cpu] = (node >= 0) ? node : 0; - if (node >= 0) - cpu_set(cpu, node_to_cpu_mask[node]); - } -} - -#endif /* CONFIG_NUMA */ - /* * Cycle through the APs sending Wakeup IPIs to boot each. */ @@ -611,6 +571,7 @@ void __devinit smp_prepare_boot_cpu(void) { cpu_set(smp_processor_id(), cpu_online_map); cpu_set(smp_processor_id(), cpu_callin_map); + per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; } /* @@ -688,6 +649,7 @@ int __cpu_disable(void) return -EBUSY; remove_siblinginfo(cpu); + cpu_clear(cpu, cpu_online_map); fixup_irqs(); local_flush_tlb_all(); cpu_clear(cpu, cpu_callin_map); @@ -774,6 +736,7 @@ __cpu_up (unsigned int cpu) if (cpu_isset(cpu, cpu_callin_map)) return -EINVAL; + per_cpu(cpu_state, cpu) = CPU_UP_PREPARE; /* Processor goes to start_secondary(), sets online flag */ ret = do_boot_cpu(sapicid, cpu); if (ret < 0) diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index f1aafd4c05f9..92ff46ad21e2 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -36,6 +36,15 @@ int arch_register_cpu(int num) parent = &sysfs_nodes[cpu_to_node(num)]; #endif /* CONFIG_NUMA */ +#ifdef CONFIG_ACPI_BOOT + /* + * If CPEI cannot be re-targetted, and this is + * CPEI target, then dont create the control file + */ + if (!can_cpei_retarget() && is_cpu_cpei_target(num)) + sysfs_cpus[num].cpu.no_control = 1; +#endif + return register_cpu(&sysfs_cpus[num].cpu, num, parent); } diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index 1861173bd4f6..4440c8343fa4 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -21,12 +21,26 @@ #include <asm/intrinsics.h> #include <asm/processor.h> #include <asm/uaccess.h> +#include <asm/kdebug.h> extern spinlock_t timerlist_lock; fpswa_interface_t *fpswa_interface; EXPORT_SYMBOL(fpswa_interface); +struct notifier_block *ia64die_chain; +static DEFINE_SPINLOCK(die_notifier_lock); + +int register_die_notifier(struct notifier_block *nb) +{ + int err = 0; + unsigned long flags; + spin_lock_irqsave(&die_notifier_lock, flags); + err = notifier_chain_register(&ia64die_chain, nb); + spin_unlock_irqrestore(&die_notifier_lock, flags); + return err; +} + void __init trap_init (void) { @@ -76,14 +90,16 @@ die (const char *str, struct pt_regs *regs, long err) .lock_owner_depth = 0 }; static int die_counter; + int cpu = get_cpu(); - if (die.lock_owner != smp_processor_id()) { + if (die.lock_owner != cpu) { console_verbose(); spin_lock_irq(&die.lock); - die.lock_owner = smp_processor_id(); + die.lock_owner = cpu; die.lock_owner_depth = 0; bust_spinlocks(1); } + put_cpu(); if (++die.lock_owner_depth < 3) { printk("%s[%d]: %s %ld [%d]\n", @@ -137,6 +153,10 @@ ia64_bad_break (unsigned long break_num, struct pt_regs *regs) switch (break_num) { case 0: /* unknown error (used by GCC for __builtin_abort()) */ + if (notify_die(DIE_BREAK, "break 0", regs, break_num, TRAP_BRKPT, SIGTRAP) + == NOTIFY_STOP) { + return; + } die_if_kernel("bugcheck!", regs, break_num); sig = SIGILL; code = ILL_ILLOPC; break; @@ -189,6 +209,15 @@ ia64_bad_break (unsigned long break_num, struct pt_regs *regs) sig = SIGILL; code = __ILL_BNDMOD; break; + case 0x80200: + case 0x80300: + if (notify_die(DIE_BREAK, "kprobe", regs, break_num, TRAP_BRKPT, SIGTRAP) + == NOTIFY_STOP) { + return; + } + sig = SIGTRAP; code = TRAP_BRKPT; + break; + default: if (break_num < 0x40000 || break_num > 0x100000) die_if_kernel("Bad break", regs, break_num); @@ -548,7 +577,11 @@ ia64_fault (unsigned long vector, unsigned long isr, unsigned long ifa, #endif break; case 35: siginfo.si_code = TRAP_BRANCH; ifa = 0; break; - case 36: siginfo.si_code = TRAP_TRACE; ifa = 0; break; + case 36: + if (notify_die(DIE_SS, "ss", ®s, vector, + vector, SIGTRAP) == NOTIFY_STOP) + return; + siginfo.si_code = TRAP_TRACE; ifa = 0; break; } siginfo.si_signo = SIGTRAP; siginfo.si_errno = 0; diff --git a/arch/ia64/kernel/unwind.c b/arch/ia64/kernel/unwind.c index 2776a074c6f1..3288be47bc75 100644 --- a/arch/ia64/kernel/unwind.c +++ b/arch/ia64/kernel/unwind.c @@ -362,7 +362,7 @@ unw_access_gr (struct unw_frame_info *info, int regnum, unsigned long *val, char if (info->pri_unat_loc) nat_addr = info->pri_unat_loc; else - nat_addr = &info->sw->ar_unat; + nat_addr = &info->sw->caller_unat; nat_mask = (1UL << ((long) addr & 0x1f8)/8); } } else { @@ -524,7 +524,7 @@ unw_access_ar (struct unw_frame_info *info, int regnum, unsigned long *val, int case UNW_AR_UNAT: addr = info->unat_loc; if (!addr) - addr = &info->sw->ar_unat; + addr = &info->sw->caller_unat; break; case UNW_AR_LC: @@ -1775,7 +1775,7 @@ run_script (struct unw_script *script, struct unw_frame_info *state) case UNW_INSN_SETNAT_MEMSTK: if (!state->pri_unat_loc) - state->pri_unat_loc = &state->sw->ar_unat; + state->pri_unat_loc = &state->sw->caller_unat; /* register off. is a multiple of 8, so the least 3 bits (type) are 0 */ s[dst+1] = ((unsigned long) state->pri_unat_loc - s[dst]) | UNW_NAT_MEMSTK; break; @@ -2243,11 +2243,11 @@ unw_init (void) if (8*sizeof(unw_hash_index_t) < UNW_LOG_HASH_SIZE) unw_hash_index_t_is_too_narrow(); - unw.sw_off[unw.preg_index[UNW_REG_PRI_UNAT_GR]] = SW(AR_UNAT); + unw.sw_off[unw.preg_index[UNW_REG_PRI_UNAT_GR]] = SW(CALLER_UNAT); unw.sw_off[unw.preg_index[UNW_REG_BSPSTORE]] = SW(AR_BSPSTORE); - unw.sw_off[unw.preg_index[UNW_REG_PFS]] = SW(AR_UNAT); + unw.sw_off[unw.preg_index[UNW_REG_PFS]] = SW(AR_PFS); unw.sw_off[unw.preg_index[UNW_REG_RP]] = SW(B0); - unw.sw_off[unw.preg_index[UNW_REG_UNAT]] = SW(AR_UNAT); + unw.sw_off[unw.preg_index[UNW_REG_UNAT]] = SW(CALLER_UNAT); unw.sw_off[unw.preg_index[UNW_REG_PR]] = SW(PR); unw.sw_off[unw.preg_index[UNW_REG_LC]] = SW(AR_LC); unw.sw_off[unw.preg_index[UNW_REG_FPSR]] = SW(AR_FPSR); diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index b9f0db4c1b04..a676e79e0681 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -8,6 +8,11 @@ #define LOAD_OFFSET (KERNEL_START - KERNEL_TR_PAGE_SIZE) #include <asm-generic/vmlinux.lds.h> +#define IVT_TEXT \ + VMLINUX_SYMBOL(__start_ivt_text) = .; \ + *(.text.ivt) \ + VMLINUX_SYMBOL(__end_ivt_text) = .; + OUTPUT_FORMAT("elf64-ia64-little") OUTPUT_ARCH(ia64) ENTRY(phys_start) @@ -39,7 +44,7 @@ SECTIONS .text : AT(ADDR(.text) - LOAD_OFFSET) { - *(.text.ivt) + IVT_TEXT *(.text) SCHED_TEXT LOCK_TEXT diff --git a/arch/ia64/lib/flush.S b/arch/ia64/lib/flush.S index a1af9146cfdb..3e2cfa2c6d39 100644 --- a/arch/ia64/lib/flush.S +++ b/arch/ia64/lib/flush.S @@ -3,37 +3,59 @@ * * Copyright (C) 1999-2001, 2005 Hewlett-Packard Co * David Mosberger-Tang <davidm@hpl.hp.com> + * + * 05/28/05 Zoltan Menyhart Dynamic stride size */ + #include <asm/asmmacro.h> -#include <asm/page.h> + /* * flush_icache_range(start,end) - * Must flush range from start to end-1 but nothing else (need to + * + * Make i-cache(s) coherent with d-caches. + * + * Must deal with range from start to end-1 but nothing else (need to * be careful not to touch addresses that may be unmapped). + * + * Note: "in0" and "in1" are preserved for debugging purposes. */ GLOBAL_ENTRY(flush_icache_range) + .prologue - alloc r2=ar.pfs,2,0,0,0 - sub r8=in1,in0,1 + alloc r2=ar.pfs,2,0,0,0 + movl r3=ia64_i_cache_stride_shift + mov r21=1 + ;; + ld8 r20=[r3] // r20: stride shift + sub r22=in1,r0,1 // last byte address ;; - shr.u r8=r8,5 // we flush 32 bytes per iteration - .save ar.lc, r3 - mov r3=ar.lc // save ar.lc + shr.u r23=in0,r20 // start / (stride size) + shr.u r22=r22,r20 // (last byte address) / (stride size) + shl r21=r21,r20 // r21: stride size of the i-cache(s) + ;; + sub r8=r22,r23 // number of strides - 1 + shl r24=r23,r20 // r24: addresses for "fc.i" = + // "start" rounded down to stride boundary + .save ar.lc,r3 + mov r3=ar.lc // save ar.lc ;; .body - - mov ar.lc=r8 + mov ar.lc=r8 ;; -.Loop: fc.i in0 // issuable on M2 only - add in0=32,in0 + /* + * 32 byte aligned loop, even number of (actually 2) bundles + */ +.Loop: fc.i r24 // issuable on M0 only + add r24=r21,r24 // we flush "stride size" bytes per iteration + nop.i 0 br.cloop.sptk.few .Loop ;; sync.i ;; srlz.i ;; - mov ar.lc=r3 // restore ar.lc + mov ar.lc=r3 // restore ar.lc br.ret.sptk.many rp END(flush_icache_range) diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index c00710929390..b5c90e548195 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -44,150 +44,7 @@ struct early_node_data { }; static struct early_node_data mem_data[MAX_NUMNODES] __initdata; - -/** - * reassign_cpu_only_nodes - called from find_memory to move CPU-only nodes to a memory node - * - * This function will move nodes with only CPUs (no memory) - * to a node with memory which is at the minimum numa_slit distance. - * Any reassigments will result in the compression of the nodes - * and renumbering the nid values where appropriate. - * The static declarations below are to avoid large stack size which - * makes the code not re-entrant. - */ -static void __init reassign_cpu_only_nodes(void) -{ - struct node_memblk_s *p; - int i, j, k, nnode, nid, cpu, cpunid, pxm; - u8 cslit, slit; - static DECLARE_BITMAP(nodes_with_mem, MAX_NUMNODES) __initdata; - static u8 numa_slit_fix[MAX_NUMNODES * MAX_NUMNODES] __initdata; - static int node_flip[MAX_NUMNODES] __initdata; - static int old_nid_map[NR_CPUS] __initdata; - - for (nnode = 0, p = &node_memblk[0]; p < &node_memblk[num_node_memblks]; p++) - if (!test_bit(p->nid, (void *) nodes_with_mem)) { - set_bit(p->nid, (void *) nodes_with_mem); - nnode++; - } - - /* - * All nids with memory. - */ - if (nnode == num_online_nodes()) - return; - - /* - * Change nids and attempt to migrate CPU-only nodes - * to the best numa_slit (closest neighbor) possible. - * For reassigned CPU nodes a nid can't be arrived at - * until after this loop because the target nid's new - * identity might not have been established yet. So - * new nid values are fabricated above num_online_nodes() and - * mapped back later to their true value. - */ - /* MCD - This code is a bit complicated, but may be unnecessary now. - * We can now handle much more interesting node-numbering. - * The old requirement that 0 <= nid <= numnodes <= MAX_NUMNODES - * and that there be no holes in the numbering 0..numnodes - * has become simply 0 <= nid <= MAX_NUMNODES. - */ - nid = 0; - for_each_online_node(i) { - if (test_bit(i, (void *) nodes_with_mem)) { - /* - * Save original nid value for numa_slit - * fixup and node_cpuid reassignments. - */ - node_flip[nid] = i; - - if (i == nid) { - nid++; - continue; - } - - for (p = &node_memblk[0]; p < &node_memblk[num_node_memblks]; p++) - if (p->nid == i) - p->nid = nid; - - cpunid = nid; - nid++; - } else - cpunid = MAX_NUMNODES; - - for (cpu = 0; cpu < NR_CPUS; cpu++) - if (node_cpuid[cpu].nid == i) { - /* - * For nodes not being reassigned just - * fix the cpu's nid and reverse pxm map - */ - if (cpunid < MAX_NUMNODES) { - pxm = nid_to_pxm_map[i]; - pxm_to_nid_map[pxm] = - node_cpuid[cpu].nid = cpunid; - continue; - } - - /* - * For nodes being reassigned, find best node by - * numa_slit information and then make a temporary - * nid value based on current nid and num_online_nodes(). - */ - slit = 0xff; - k = 2*num_online_nodes(); - for_each_online_node(j) { - if (i == j) - continue; - else if (test_bit(j, (void *) nodes_with_mem)) { - cslit = numa_slit[i * num_online_nodes() + j]; - if (cslit < slit) { - k = num_online_nodes() + j; - slit = cslit; - } - } - } - - /* save old nid map so we can update the pxm */ - old_nid_map[cpu] = node_cpuid[cpu].nid; - node_cpuid[cpu].nid = k; - } - } - - /* - * Fixup temporary nid values for CPU-only nodes. - */ - for (cpu = 0; cpu < NR_CPUS; cpu++) - if (node_cpuid[cpu].nid == (2*num_online_nodes())) { - pxm = nid_to_pxm_map[old_nid_map[cpu]]; - pxm_to_nid_map[pxm] = node_cpuid[cpu].nid = nnode - 1; - } else { - for (i = 0; i < nnode; i++) { - if (node_flip[i] != (node_cpuid[cpu].nid - num_online_nodes())) - continue; - - pxm = nid_to_pxm_map[old_nid_map[cpu]]; - pxm_to_nid_map[pxm] = node_cpuid[cpu].nid = i; - break; - } - } - - /* - * Fix numa_slit by compressing from larger - * nid array to reduced nid array. - */ - for (i = 0; i < nnode; i++) - for (j = 0; j < nnode; j++) - numa_slit_fix[i * nnode + j] = - numa_slit[node_flip[i] * num_online_nodes() + node_flip[j]]; - - memcpy(numa_slit, numa_slit_fix, sizeof (numa_slit)); - - nodes_clear(node_online_map); - for (i = 0; i < nnode; i++) - node_set_online(i); - - return; -} +static nodemask_t memory_less_mask __initdata; /* * To prevent cache aliasing effects, align per-node structures so that they @@ -233,44 +90,101 @@ static int __init build_node_maps(unsigned long start, unsigned long len, } /** - * early_nr_phys_cpus_node - return number of physical cpus on a given node + * early_nr_cpus_node - return number of cpus on a given node * @node: node to check * - * Count the number of physical cpus on @node. These are cpus that actually - * exist. We can't use nr_cpus_node() yet because + * Count the number of cpus on @node. We can't use nr_cpus_node() yet because * acpi_boot_init() (which builds the node_to_cpu_mask array) hasn't been - * called yet. + * called yet. Note that node 0 will also count all non-existent cpus. */ -static int early_nr_phys_cpus_node(int node) +static int __init early_nr_cpus_node(int node) { int cpu, n = 0; for (cpu = 0; cpu < NR_CPUS; cpu++) if (node == node_cpuid[cpu].nid) - if ((cpu == 0) || node_cpuid[cpu].phys_id) - n++; + n++; return n; } +/** + * compute_pernodesize - compute size of pernode data + * @node: the node id. + */ +static unsigned long __init compute_pernodesize(int node) +{ + unsigned long pernodesize = 0, cpus; + + cpus = early_nr_cpus_node(node); + pernodesize += PERCPU_PAGE_SIZE * cpus; + pernodesize += node * L1_CACHE_BYTES; + pernodesize += L1_CACHE_ALIGN(sizeof(pg_data_t)); + pernodesize += L1_CACHE_ALIGN(sizeof(struct ia64_node_data)); + pernodesize = PAGE_ALIGN(pernodesize); + return pernodesize; +} /** - * early_nr_cpus_node - return number of cpus on a given node - * @node: node to check + * per_cpu_node_setup - setup per-cpu areas on each node + * @cpu_data: per-cpu area on this node + * @node: node to setup * - * Count the number of cpus on @node. We can't use nr_cpus_node() yet because - * acpi_boot_init() (which builds the node_to_cpu_mask array) hasn't been - * called yet. Note that node 0 will also count all non-existent cpus. + * Copy the static per-cpu data into the region we just set aside and then + * setup __per_cpu_offset for each CPU on this node. Return a pointer to + * the end of the area. */ -static int early_nr_cpus_node(int node) +static void *per_cpu_node_setup(void *cpu_data, int node) { - int cpu, n = 0; +#ifdef CONFIG_SMP + int cpu; - for (cpu = 0; cpu < NR_CPUS; cpu++) - if (node == node_cpuid[cpu].nid) - n++; + for (cpu = 0; cpu < NR_CPUS; cpu++) { + if (node == node_cpuid[cpu].nid) { + memcpy(__va(cpu_data), __phys_per_cpu_start, + __per_cpu_end - __per_cpu_start); + __per_cpu_offset[cpu] = (char*)__va(cpu_data) - + __per_cpu_start; + cpu_data += PERCPU_PAGE_SIZE; + } + } +#endif + return cpu_data; +} - return n; +/** + * fill_pernode - initialize pernode data. + * @node: the node id. + * @pernode: physical address of pernode data + * @pernodesize: size of the pernode data + */ +static void __init fill_pernode(int node, unsigned long pernode, + unsigned long pernodesize) +{ + void *cpu_data; + int cpus = early_nr_cpus_node(node); + struct bootmem_data *bdp = &mem_data[node].bootmem_data; + + mem_data[node].pernode_addr = pernode; + mem_data[node].pernode_size = pernodesize; + memset(__va(pernode), 0, pernodesize); + + cpu_data = (void *)pernode; + pernode += PERCPU_PAGE_SIZE * cpus; + pernode += node * L1_CACHE_BYTES; + + mem_data[node].pgdat = __va(pernode); + pernode += L1_CACHE_ALIGN(sizeof(pg_data_t)); + + mem_data[node].node_data = __va(pernode); + pernode += L1_CACHE_ALIGN(sizeof(struct ia64_node_data)); + + mem_data[node].pgdat->bdata = bdp; + pernode += L1_CACHE_ALIGN(sizeof(pg_data_t)); + + cpu_data = per_cpu_node_setup(cpu_data, node); + + return; } /** @@ -304,9 +218,8 @@ static int early_nr_cpus_node(int node) static int __init find_pernode_space(unsigned long start, unsigned long len, int node) { - unsigned long epfn, cpu, cpus, phys_cpus; + unsigned long epfn; unsigned long pernodesize = 0, pernode, pages, mapsize; - void *cpu_data; struct bootmem_data *bdp = &mem_data[node].bootmem_data; epfn = (start + len) >> PAGE_SHIFT; @@ -329,49 +242,12 @@ static int __init find_pernode_space(unsigned long start, unsigned long len, * Calculate total size needed, incl. what's necessary * for good alignment and alias prevention. */ - cpus = early_nr_cpus_node(node); - phys_cpus = early_nr_phys_cpus_node(node); - pernodesize += PERCPU_PAGE_SIZE * cpus; - pernodesize += node * L1_CACHE_BYTES; - pernodesize += L1_CACHE_ALIGN(sizeof(pg_data_t)); - pernodesize += L1_CACHE_ALIGN(sizeof(struct ia64_node_data)); - pernodesize = PAGE_ALIGN(pernodesize); + pernodesize = compute_pernodesize(node); pernode = NODEDATA_ALIGN(start, node); /* Is this range big enough for what we want to store here? */ - if (start + len > (pernode + pernodesize + mapsize)) { - mem_data[node].pernode_addr = pernode; - mem_data[node].pernode_size = pernodesize; - memset(__va(pernode), 0, pernodesize); - - cpu_data = (void *)pernode; - pernode += PERCPU_PAGE_SIZE * cpus; - pernode += node * L1_CACHE_BYTES; - - mem_data[node].pgdat = __va(pernode); - pernode += L1_CACHE_ALIGN(sizeof(pg_data_t)); - - mem_data[node].node_data = __va(pernode); - pernode += L1_CACHE_ALIGN(sizeof(struct ia64_node_data)); - - mem_data[node].pgdat->bdata = bdp; - pernode += L1_CACHE_ALIGN(sizeof(pg_data_t)); - - /* - * Copy the static per-cpu data into the region we - * just set aside and then setup __per_cpu_offset - * for each CPU on this node. - */ - for (cpu = 0; cpu < NR_CPUS; cpu++) { - if (node == node_cpuid[cpu].nid) { - memcpy(__va(cpu_data), __phys_per_cpu_start, - __per_cpu_end - __per_cpu_start); - __per_cpu_offset[cpu] = (char*)__va(cpu_data) - - __per_cpu_start; - cpu_data += PERCPU_PAGE_SIZE; - } - } - } + if (start + len > (pernode + pernodesize + mapsize)) + fill_pernode(node, pernode, pernodesize); return 0; } @@ -411,6 +287,9 @@ static void __init reserve_pernode_space(void) for_each_online_node(node) { pg_data_t *pdp = mem_data[node].pgdat; + if (node_isset(node, memory_less_mask)) + continue; + bdp = pdp->bdata; /* First the bootmem_map itself */ @@ -436,8 +315,8 @@ static void __init reserve_pernode_space(void) */ static void __init initialize_pernode_data(void) { - int cpu, node; pg_data_t *pgdat_list[MAX_NUMNODES]; + int cpu, node; for_each_online_node(node) pgdat_list[node] = mem_data[node].pgdat; @@ -447,12 +326,99 @@ static void __init initialize_pernode_data(void) memcpy(mem_data[node].node_data->pg_data_ptrs, pgdat_list, sizeof(pgdat_list)); } - +#ifdef CONFIG_SMP /* Set the node_data pointer for each per-cpu struct */ for (cpu = 0; cpu < NR_CPUS; cpu++) { node = node_cpuid[cpu].nid; per_cpu(cpu_info, cpu).node_data = mem_data[node].node_data; } +#else + { + struct cpuinfo_ia64 *cpu0_cpu_info; + cpu = 0; + node = node_cpuid[cpu].nid; + cpu0_cpu_info = (struct cpuinfo_ia64 *)(__phys_per_cpu_start + + ((char *)&per_cpu__cpu_info - __per_cpu_start)); + cpu0_cpu_info->node_data = mem_data[node].node_data; + } +#endif /* CONFIG_SMP */ +} + +/** + * memory_less_node_alloc - * attempt to allocate memory on the best NUMA slit + * node but fall back to any other node when __alloc_bootmem_node fails + * for best. + * @nid: node id + * @pernodesize: size of this node's pernode data + * @align: alignment to use for this node's pernode data + */ +static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize, + unsigned long align) +{ + void *ptr = NULL; + u8 best = 0xff; + int bestnode = -1, node; + + for_each_online_node(node) { + if (node_isset(node, memory_less_mask)) + continue; + else if (node_distance(nid, node) < best) { + best = node_distance(nid, node); + bestnode = node; + } + } + + ptr = __alloc_bootmem_node(mem_data[bestnode].pgdat, + pernodesize, align, __pa(MAX_DMA_ADDRESS)); + + if (!ptr) + panic("NO memory for memory less node\n"); + return ptr; +} + +/** + * pgdat_insert - insert the pgdat into global pgdat_list + * @pgdat: the pgdat for a node. + */ +static void __init pgdat_insert(pg_data_t *pgdat) +{ + pg_data_t *prev = NULL, *next; + + for_each_pgdat(next) + if (pgdat->node_id < next->node_id) + break; + else + prev = next; + + if (prev) { + prev->pgdat_next = pgdat; + pgdat->pgdat_next = next; + } else { + pgdat->pgdat_next = pgdat_list; + pgdat_list = pgdat; + } + + return; +} + +/** + * memory_less_nodes - allocate and initialize CPU only nodes pernode + * information. + */ +static void __init memory_less_nodes(void) +{ + unsigned long pernodesize; + void *pernode; + int node; + + for_each_node_mask(node, memory_less_mask) { + pernodesize = compute_pernodesize(node); + pernode = memory_less_node_alloc(node, pernodesize, + (node) ? (node * PERCPU_PAGE_SIZE) : (1024*1024)); + fill_pernode(node, __pa(pernode), pernodesize); + } + + return; } /** @@ -472,16 +438,19 @@ void __init find_memory(void) node_set_online(0); } + nodes_or(memory_less_mask, memory_less_mask, node_online_map); min_low_pfn = -1; max_low_pfn = 0; - if (num_online_nodes() > 1) - reassign_cpu_only_nodes(); - /* These actually end up getting called by call_pernode_memory() */ efi_memmap_walk(filter_rsvd_memory, build_node_maps); efi_memmap_walk(filter_rsvd_memory, find_pernode_space); + for_each_online_node(node) + if (mem_data[node].bootmem_data.node_low_pfn) { + node_clear(node, memory_less_mask); + mem_data[node].min_pfn = ~0UL; + } /* * Initialize the boot memory maps in reverse order since that's * what the bootmem allocator expects @@ -492,17 +461,14 @@ void __init find_memory(void) if (!node_online(node)) continue; + else if (node_isset(node, memory_less_mask)) + continue; bdp = &mem_data[node].bootmem_data; pernode = mem_data[node].pernode_addr; pernodesize = mem_data[node].pernode_size; map = pernode + pernodesize; - /* Sanity check... */ - if (!pernode) - panic("pernode space for node %d " - "could not be allocated!", node); - init_bootmem_node(mem_data[node].pgdat, map>>PAGE_SHIFT, bdp->node_boot_start>>PAGE_SHIFT, @@ -512,6 +478,7 @@ void __init find_memory(void) efi_memmap_walk(filter_rsvd_memory, free_node_bootmem); reserve_pernode_space(); + memory_less_nodes(); initialize_pernode_data(); max_pfn = max_low_pfn; @@ -519,6 +486,7 @@ void __init find_memory(void) find_initrd(); } +#ifdef CONFIG_SMP /** * per_cpu_init - setup per-cpu variables * @@ -529,15 +497,15 @@ void *per_cpu_init(void) { int cpu; - if (smp_processor_id() == 0) { - for (cpu = 0; cpu < NR_CPUS; cpu++) { - per_cpu(local_per_cpu_offset, cpu) = - __per_cpu_offset[cpu]; - } - } + if (smp_processor_id() != 0) + return __per_cpu_start + __per_cpu_offset[smp_processor_id()]; + + for (cpu = 0; cpu < NR_CPUS; cpu++) + per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu]; return __per_cpu_start + __per_cpu_offset[smp_processor_id()]; } +#endif /* CONFIG_SMP */ /** * show_mem - give short summary of memory stats @@ -560,14 +528,15 @@ void show_mem(void) int shared = 0, cached = 0, reserved = 0; printk("Node ID: %d\n", pgdat->node_id); for(i = 0; i < pgdat->node_spanned_pages; i++) { + struct page *page = pgdat_page_nr(pgdat, i); if (!ia64_pfn_valid(pgdat->node_start_pfn+i)) continue; - if (PageReserved(pgdat->node_mem_map+i)) + if (PageReserved(page)) reserved++; - else if (PageSwapCache(pgdat->node_mem_map+i)) + else if (PageSwapCache(page)) cached++; - else if (page_count(pgdat->node_mem_map+i)) - shared += page_count(pgdat->node_mem_map+i)-1; + else if (page_count(page)) + shared += page_count(page)-1; } total_present += present; total_reserved += reserved; @@ -679,12 +648,13 @@ void __init paging_init(void) max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT; - /* so min() will work in count_node_pages */ - for_each_online_node(node) - mem_data[node].min_pfn = ~0UL; - efi_memmap_walk(filter_rsvd_memory, count_node_pages); + vmalloc_end -= PAGE_ALIGN(max_low_pfn * sizeof(struct page)); + vmem_map = (struct page *) vmalloc_end; + efi_memmap_walk(create_mem_map_page_table, NULL); + printk("Virtual mem_map starts at 0x%p\n", vmem_map); + for_each_online_node(node) { memset(zones_size, 0, sizeof(zones_size)); memset(zholes_size, 0, sizeof(zholes_size)); @@ -718,15 +688,6 @@ void __init paging_init(void) mem_data[node].num_dma_physpages); } - if (node == 0) { - vmalloc_end -= - PAGE_ALIGN(max_low_pfn * sizeof(struct page)); - vmem_map = (struct page *) vmalloc_end; - - efi_memmap_walk(create_mem_map_page_table, NULL); - printk("Virtual mem_map starts at 0x%p\n", vmem_map); - } - pfn_offset = mem_data[node].min_pfn; NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset; @@ -734,5 +695,11 @@ void __init paging_init(void) pfn_offset, zholes_size); } + /* + * Make memory less nodes become a member of the known nodes. + */ + for_each_node_mask(node, memory_less_mask) + pgdat_insert(mem_data[node].pgdat); + zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page)); } diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c index 4174ec999dde..ff62551eb3a1 100644 --- a/arch/ia64/mm/fault.c +++ b/arch/ia64/mm/fault.c @@ -14,6 +14,7 @@ #include <asm/processor.h> #include <asm/system.h> #include <asm/uaccess.h> +#include <asm/kdebug.h> extern void die (char *, struct pt_regs *, long); @@ -102,6 +103,13 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re goto bad_area_no_up; #endif + /* + * This is to handle the kprobes on user space access instructions + */ + if (notify_die(DIE_PAGE_FAULT, "page fault", regs, code, TRAP_BRKPT, + SIGSEGV) == NOTIFY_STOP) + return; + down_read(&mm->mmap_sem); vma = find_vma_prev(mm, address, &prev_vma); diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 4eb2f52b87a1..65f9958db9f0 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -597,7 +597,8 @@ mem_init (void) kclist_add(&kcore_kernel, _stext, _end - _stext); for_each_pgdat(pgdat) - totalram_pages += free_all_bootmem_node(pgdat); + if (pgdat->bdata->node_bootmem_map) + totalram_pages += free_all_bootmem_node(pgdat); reserved_pages = 0; efi_memmap_walk(count_reserved_pages, &reserved_pages); diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 88641e5095b5..54d9ed444e4a 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -33,8 +33,6 @@ #include <asm/hw_irq.h> -static int pci_routeirq; - /* * Low-level SAL-based PCI configuration access functions. Note that SAL * calls are already serialized (via sal_lock), so we don't need another @@ -139,24 +137,8 @@ static void acpi_map_iosapics(void) static int __init pci_acpi_init (void) { - struct pci_dev *dev = NULL; - - printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n"); - acpi_map_iosapics(); - if (pci_routeirq) { - /* - * PCI IRQ routing is set up by pci_enable_device(), but we - * also do it here in case there are still broken drivers that - * don't use pci_enable_device(). - */ - printk(KERN_INFO "PCI: Routing interrupts for all devices because \"pci=routeirq\" specified\n"); - for_each_pci_dev(dev) - acpi_pci_irq_enable(dev); - } else - printk(KERN_INFO "PCI: If a device doesn't work, try \"pci=routeirq\". If it helps, post a report\n"); - return 0; } @@ -175,6 +157,7 @@ alloc_pci_controller (int seg) memset(controller, 0, sizeof(*controller)); controller->segment = seg; + controller->node = -1; return controller; } @@ -306,6 +289,7 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus) unsigned int windows = 0; struct pci_bus *pbus; char *name; + int pxm; controller = alloc_pci_controller(domain); if (!controller) @@ -313,10 +297,16 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus) controller->acpi_handle = device->handle; + pxm = acpi_get_pxm(controller->acpi_handle); +#ifdef CONFIG_NUMA + if (pxm >= 0) + controller->node = pxm_to_nid_map[pxm]; +#endif + acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_window, &windows); - controller->window = kmalloc(sizeof(*controller->window) * windows, - GFP_KERNEL); + controller->window = kmalloc_node(sizeof(*controller->window) * windows, + GFP_KERNEL, controller->node); if (!controller->window) goto out2; @@ -330,7 +320,7 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus) acpi_walk_resources(device->handle, METHOD_NAME__CRS, add_window, &info); - pbus = pci_scan_bus(bus, &pci_root_ops, controller); + pbus = pci_scan_bus_parented(NULL, bus, &pci_root_ops, controller); if (pbus) pcibios_setup_root_windows(pbus, controller); @@ -391,6 +381,25 @@ void pcibios_bus_to_resource(struct pci_dev *dev, res->end = region->end + offset; } +static int __devinit is_valid_resource(struct pci_dev *dev, int idx) +{ + unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM; + struct resource *devr = &dev->resource[idx]; + + if (!dev->bus) + return 0; + for (i=0; i<PCI_BUS_NUM_RESOURCES; i++) { + struct resource *busr = dev->bus->resource[i]; + + if (!busr || ((busr->flags ^ devr->flags) & type_mask)) + continue; + if ((devr->start) && (devr->start >= busr->start) && + (devr->end <= busr->end)) + return 1; + } + return 0; +} + static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) { struct pci_bus_region region; @@ -404,7 +413,8 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) region.start = dev->resource[i].start; region.end = dev->resource[i].end; pcibios_bus_to_resource(dev, &dev->resource[i], ®ion); - pci_claim_resource(dev, i); + if ((is_valid_resource(dev, i))) + pci_claim_resource(dev, i); } } @@ -416,6 +426,10 @@ pcibios_fixup_bus (struct pci_bus *b) { struct pci_dev *dev; + if (b->self) { + pci_read_bridge_bases(b); + pcibios_fixup_device_resources(b->self); + } list_for_each_entry(dev, &b->devices, bus_list) pcibios_fixup_device_resources(dev); @@ -436,18 +450,24 @@ pcibios_enable_resources (struct pci_dev *dev, int mask) u16 cmd, old_cmd; int idx; struct resource *r; + unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM; if (!dev) return -EINVAL; pci_read_config_word(dev, PCI_COMMAND, &cmd); old_cmd = cmd; - for (idx=0; idx<6; idx++) { + for (idx=0; idx<PCI_NUM_RESOURCES; idx++) { /* Only set up the desired resources. */ if (!(mask & (1 << idx))) continue; r = &dev->resource[idx]; + if (!(r->flags & type_mask)) + continue; + if ((idx == PCI_ROM_RESOURCE) && + (!(r->flags & IORESOURCE_ROM_ENABLE))) + continue; if (!r->start && r->end) { printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", @@ -459,8 +479,6 @@ pcibios_enable_resources (struct pci_dev *dev, int mask) if (r->flags & IORESOURCE_MEM) cmd |= PCI_COMMAND_MEMORY; } - if (dev->resource[PCI_ROM_RESOURCE].start) - cmd |= PCI_COMMAND_MEMORY; if (cmd != old_cmd) { printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd); pci_write_config_word(dev, PCI_COMMAND, cmd); @@ -500,8 +518,6 @@ pcibios_align_resource (void *data, struct resource *res, char * __init pcibios_setup (char *str) { - if (!strcmp(str, "routeirq")) - pci_routeirq = 1; return NULL; } diff --git a/arch/ia64/sn/include/pci/pcibr_provider.h b/arch/ia64/sn/include/pci/pcibr_provider.h deleted file mode 100644 index 1cd291d8badd..000000000000 --- a/arch/ia64/sn/include/pci/pcibr_provider.h +++ /dev/null @@ -1,151 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992-1997,2000-2004 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H -#define _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H - -/* Workarounds */ -#define PV907516 (1 << 1) /* TIOCP: Don't write the write buffer flush reg */ - -#define BUSTYPE_MASK 0x1 - -/* Macros given a pcibus structure */ -#define IS_PCIX(ps) ((ps)->pbi_bridge_mode & BUSTYPE_MASK) -#define IS_PCI_BRIDGE_ASIC(asic) (asic == PCIIO_ASIC_TYPE_PIC || \ - asic == PCIIO_ASIC_TYPE_TIOCP) -#define IS_PIC_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_PIC) - - -/* - * The different PCI Bridge types supported on the SGI Altix platforms - */ -#define PCIBR_BRIDGETYPE_UNKNOWN -1 -#define PCIBR_BRIDGETYPE_PIC 2 -#define PCIBR_BRIDGETYPE_TIOCP 3 - -/* - * Bridge 64bit Direct Map Attributes - */ -#define PCI64_ATTR_PREF (1ull << 59) -#define PCI64_ATTR_PREC (1ull << 58) -#define PCI64_ATTR_VIRTUAL (1ull << 57) -#define PCI64_ATTR_BAR (1ull << 56) -#define PCI64_ATTR_SWAP (1ull << 55) -#define PCI64_ATTR_VIRTUAL1 (1ull << 54) - -#define PCI32_LOCAL_BASE 0 -#define PCI32_MAPPED_BASE 0x40000000 -#define PCI32_DIRECT_BASE 0x80000000 - -#define IS_PCI32_MAPPED(x) ((uint64_t)(x) < PCI32_DIRECT_BASE && \ - (uint64_t)(x) >= PCI32_MAPPED_BASE) -#define IS_PCI32_DIRECT(x) ((uint64_t)(x) >= PCI32_MAPPED_BASE) - - -/* - * Bridge PMU Address Transaltion Entry Attibutes - */ -#define PCI32_ATE_V (0x1 << 0) -#define PCI32_ATE_CO (0x1 << 1) -#define PCI32_ATE_PREC (0x1 << 2) -#define PCI32_ATE_PREF (0x1 << 3) -#define PCI32_ATE_BAR (0x1 << 4) -#define PCI32_ATE_ADDR_SHFT 12 - -#define MINIMAL_ATES_REQUIRED(addr, size) \ - (IOPG(IOPGOFF(addr) + (size) - 1) == IOPG((size) - 1)) - -#define MINIMAL_ATE_FLAG(addr, size) \ - (MINIMAL_ATES_REQUIRED((uint64_t)addr, size) ? 1 : 0) - -/* bit 29 of the pci address is the SWAP bit */ -#define ATE_SWAPSHIFT 29 -#define ATE_SWAP_ON(x) ((x) |= (1 << ATE_SWAPSHIFT)) -#define ATE_SWAP_OFF(x) ((x) &= ~(1 << ATE_SWAPSHIFT)) - -/* - * I/O page size - */ -#if PAGE_SIZE < 16384 -#define IOPFNSHIFT 12 /* 4K per mapped page */ -#else -#define IOPFNSHIFT 14 /* 16K per mapped page */ -#endif - -#define IOPGSIZE (1 << IOPFNSHIFT) -#define IOPG(x) ((x) >> IOPFNSHIFT) -#define IOPGOFF(x) ((x) & (IOPGSIZE-1)) - -#define PCIBR_DEV_SWAP_DIR (1ull << 19) -#define PCIBR_CTRL_PAGE_SIZE (0x1 << 21) - -/* - * PMU resources. - */ -struct ate_resource{ - uint64_t *ate; - uint64_t num_ate; - uint64_t lowest_free_index; -}; - -struct pcibus_info { - struct pcibus_bussoft pbi_buscommon; /* common header */ - uint32_t pbi_moduleid; - short pbi_bridge_type; - short pbi_bridge_mode; - - struct ate_resource pbi_int_ate_resource; - uint64_t pbi_int_ate_size; - - uint64_t pbi_dir_xbase; - char pbi_hub_xid; - - uint64_t pbi_devreg[8]; - spinlock_t pbi_lock; - - uint32_t pbi_valid_devices; - uint32_t pbi_enabled_devices; -}; - -/* - * pcibus_info structure locking macros - */ -inline static unsigned long -pcibr_lock(struct pcibus_info *pcibus_info) -{ - unsigned long flag; - spin_lock_irqsave(&pcibus_info->pbi_lock, flag); - return(flag); -} -#define pcibr_unlock(pcibus_info, flag) spin_unlock_irqrestore(&pcibus_info->pbi_lock, flag) - -extern int pcibr_init_provider(void); -extern void *pcibr_bus_fixup(struct pcibus_bussoft *); -extern dma_addr_t pcibr_dma_map(struct pci_dev *, unsigned long, size_t); -extern dma_addr_t pcibr_dma_map_consistent(struct pci_dev *, unsigned long, size_t); -extern void pcibr_dma_unmap(struct pci_dev *, dma_addr_t, int); - -/* - * prototypes for the bridge asic register access routines in pcibr_reg.c - */ -extern void pcireg_control_bit_clr(struct pcibus_info *, uint64_t); -extern void pcireg_control_bit_set(struct pcibus_info *, uint64_t); -extern uint64_t pcireg_tflush_get(struct pcibus_info *); -extern uint64_t pcireg_intr_status_get(struct pcibus_info *); -extern void pcireg_intr_enable_bit_clr(struct pcibus_info *, uint64_t); -extern void pcireg_intr_enable_bit_set(struct pcibus_info *, uint64_t); -extern void pcireg_intr_addr_addr_set(struct pcibus_info *, int, uint64_t); -extern void pcireg_force_intr_set(struct pcibus_info *, int); -extern uint64_t pcireg_wrb_flush_get(struct pcibus_info *, int); -extern void pcireg_int_ate_set(struct pcibus_info *, int, uint64_t); -extern uint64_t * pcireg_int_ate_addr(struct pcibus_info *, int); -extern void pcibr_force_interrupt(struct sn_irq_info *sn_irq_info); -extern void pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info); -extern int pcibr_ate_alloc(struct pcibus_info *, int); -extern void pcibr_ate_free(struct pcibus_info *, int); -extern void ate_write(struct pcibus_info *, int, int, uint64_t); -#endif diff --git a/arch/ia64/sn/include/pci/pic.h b/arch/ia64/sn/include/pci/pic.h deleted file mode 100644 index fd18acecb1e6..000000000000 --- a/arch/ia64/sn/include/pci/pic.h +++ /dev/null @@ -1,261 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2003 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_PCI_PIC_H -#define _ASM_IA64_SN_PCI_PIC_H - -/* - * PIC AS DEVICE ZERO - * ------------------ - * - * PIC handles PCI/X busses. PCI/X requires that the 'bridge' (i.e. PIC) - * be designated as 'device 0'. That is a departure from earlier SGI - * PCI bridges. Because of that we use config space 1 to access the - * config space of the first actual PCI device on the bus. - * Here's what the PIC manual says: - * - * The current PCI-X bus specification now defines that the parent - * hosts bus bridge (PIC for example) must be device 0 on bus 0. PIC - * reduced the total number of devices from 8 to 4 and removed the - * device registers and windows, now only supporting devices 0,1,2, and - * 3. PIC did leave all 8 configuration space windows. The reason was - * there was nothing to gain by removing them. Here in lies the problem. - * The device numbering we do using 0 through 3 is unrelated to the device - * numbering which PCI-X requires in configuration space. In the past we - * correlated Configs pace and our device space 0 <-> 0, 1 <-> 1, etc. - * PCI-X requires we start a 1, not 0 and currently the PX brick - * does associate our: - * - * device 0 with configuration space window 1, - * device 1 with configuration space window 2, - * device 2 with configuration space window 3, - * device 3 with configuration space window 4. - * - * The net effect is that all config space access are off-by-one with - * relation to other per-slot accesses on the PIC. - * Here is a table that shows some of that: - * - * Internal Slot# - * | - * | 0 1 2 3 - * ----------|--------------------------------------- - * config | 0x21000 0x22000 0x23000 0x24000 - * | - * even rrb | 0[0] n/a 1[0] n/a [] == implied even/odd - * | - * odd rrb | n/a 0[1] n/a 1[1] - * | - * int dev | 00 01 10 11 - * | - * ext slot# | 1 2 3 4 - * ----------|--------------------------------------- - */ - -#define PIC_ATE_TARGETID_SHFT 8 -#define PIC_HOST_INTR_ADDR 0x0000FFFFFFFFFFFFUL -#define PIC_PCI64_ATTR_TARG_SHFT 60 - - -/***************************************************************************** - *********************** PIC MMR structure mapping *************************** - *****************************************************************************/ - -/* NOTE: PIC WAR. PV#854697. PIC does not allow writes just to [31:0] - * of a 64-bit register. When writing PIC registers, always write the - * entire 64 bits. - */ - -struct pic { - - /* 0x000000-0x00FFFF -- Local Registers */ - - /* 0x000000-0x000057 -- Standard Widget Configuration */ - uint64_t p_wid_id; /* 0x000000 */ - uint64_t p_wid_stat; /* 0x000008 */ - uint64_t p_wid_err_upper; /* 0x000010 */ - uint64_t p_wid_err_lower; /* 0x000018 */ - #define p_wid_err p_wid_err_lower - uint64_t p_wid_control; /* 0x000020 */ - uint64_t p_wid_req_timeout; /* 0x000028 */ - uint64_t p_wid_int_upper; /* 0x000030 */ - uint64_t p_wid_int_lower; /* 0x000038 */ - #define p_wid_int p_wid_int_lower - uint64_t p_wid_err_cmdword; /* 0x000040 */ - uint64_t p_wid_llp; /* 0x000048 */ - uint64_t p_wid_tflush; /* 0x000050 */ - - /* 0x000058-0x00007F -- Bridge-specific Widget Configuration */ - uint64_t p_wid_aux_err; /* 0x000058 */ - uint64_t p_wid_resp_upper; /* 0x000060 */ - uint64_t p_wid_resp_lower; /* 0x000068 */ - #define p_wid_resp p_wid_resp_lower - uint64_t p_wid_tst_pin_ctrl; /* 0x000070 */ - uint64_t p_wid_addr_lkerr; /* 0x000078 */ - - /* 0x000080-0x00008F -- PMU & MAP */ - uint64_t p_dir_map; /* 0x000080 */ - uint64_t _pad_000088; /* 0x000088 */ - - /* 0x000090-0x00009F -- SSRAM */ - uint64_t p_map_fault; /* 0x000090 */ - uint64_t _pad_000098; /* 0x000098 */ - - /* 0x0000A0-0x0000AF -- Arbitration */ - uint64_t p_arb; /* 0x0000A0 */ - uint64_t _pad_0000A8; /* 0x0000A8 */ - - /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */ - uint64_t p_ate_parity_err; /* 0x0000B0 */ - uint64_t _pad_0000B8; /* 0x0000B8 */ - - /* 0x0000C0-0x0000FF -- PCI/GIO */ - uint64_t p_bus_timeout; /* 0x0000C0 */ - uint64_t p_pci_cfg; /* 0x0000C8 */ - uint64_t p_pci_err_upper; /* 0x0000D0 */ - uint64_t p_pci_err_lower; /* 0x0000D8 */ - #define p_pci_err p_pci_err_lower - uint64_t _pad_0000E0[4]; /* 0x0000{E0..F8} */ - - /* 0x000100-0x0001FF -- Interrupt */ - uint64_t p_int_status; /* 0x000100 */ - uint64_t p_int_enable; /* 0x000108 */ - uint64_t p_int_rst_stat; /* 0x000110 */ - uint64_t p_int_mode; /* 0x000118 */ - uint64_t p_int_device; /* 0x000120 */ - uint64_t p_int_host_err; /* 0x000128 */ - uint64_t p_int_addr[8]; /* 0x0001{30,,,68} */ - uint64_t p_err_int_view; /* 0x000170 */ - uint64_t p_mult_int; /* 0x000178 */ - uint64_t p_force_always[8]; /* 0x0001{80,,,B8} */ - uint64_t p_force_pin[8]; /* 0x0001{C0,,,F8} */ - - /* 0x000200-0x000298 -- Device */ - uint64_t p_device[4]; /* 0x0002{00,,,18} */ - uint64_t _pad_000220[4]; /* 0x0002{20,,,38} */ - uint64_t p_wr_req_buf[4]; /* 0x0002{40,,,58} */ - uint64_t _pad_000260[4]; /* 0x0002{60,,,78} */ - uint64_t p_rrb_map[2]; /* 0x0002{80,,,88} */ - #define p_even_resp p_rrb_map[0] /* 0x000280 */ - #define p_odd_resp p_rrb_map[1] /* 0x000288 */ - uint64_t p_resp_status; /* 0x000290 */ - uint64_t p_resp_clear; /* 0x000298 */ - - uint64_t _pad_0002A0[12]; /* 0x0002{A0..F8} */ - - /* 0x000300-0x0003F8 -- Buffer Address Match Registers */ - struct { - uint64_t upper; /* 0x0003{00,,,F0} */ - uint64_t lower; /* 0x0003{08,,,F8} */ - } p_buf_addr_match[16]; - - /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */ - struct { - uint64_t flush_w_touch; /* 0x000{400,,,5C0} */ - uint64_t flush_wo_touch; /* 0x000{408,,,5C8} */ - uint64_t inflight; /* 0x000{410,,,5D0} */ - uint64_t prefetch; /* 0x000{418,,,5D8} */ - uint64_t total_pci_retry; /* 0x000{420,,,5E0} */ - uint64_t max_pci_retry; /* 0x000{428,,,5E8} */ - uint64_t max_latency; /* 0x000{430,,,5F0} */ - uint64_t clear_all; /* 0x000{438,,,5F8} */ - } p_buf_count[8]; - - - /* 0x000600-0x0009FF -- PCI/X registers */ - uint64_t p_pcix_bus_err_addr; /* 0x000600 */ - uint64_t p_pcix_bus_err_attr; /* 0x000608 */ - uint64_t p_pcix_bus_err_data; /* 0x000610 */ - uint64_t p_pcix_pio_split_addr; /* 0x000618 */ - uint64_t p_pcix_pio_split_attr; /* 0x000620 */ - uint64_t p_pcix_dma_req_err_attr; /* 0x000628 */ - uint64_t p_pcix_dma_req_err_addr; /* 0x000630 */ - uint64_t p_pcix_timeout; /* 0x000638 */ - - uint64_t _pad_000640[120]; /* 0x000{640,,,9F8} */ - - /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */ - struct { - uint64_t p_buf_addr; /* 0x000{A00,,,AF0} */ - uint64_t p_buf_attr; /* 0X000{A08,,,AF8} */ - } p_pcix_read_buf_64[16]; - - struct { - uint64_t p_buf_addr; /* 0x000{B00,,,BE0} */ - uint64_t p_buf_attr; /* 0x000{B08,,,BE8} */ - uint64_t p_buf_valid; /* 0x000{B10,,,BF0} */ - uint64_t __pad1; /* 0x000{B18,,,BF8} */ - } p_pcix_write_buf_64[8]; - - /* End of Local Registers -- Start of Address Map space */ - - char _pad_000c00[0x010000 - 0x000c00]; - - /* 0x010000-0x011fff -- Internal ATE RAM (Auto Parity Generation) */ - uint64_t p_int_ate_ram[1024]; /* 0x010000-0x011fff */ - - /* 0x012000-0x013fff -- Internal ATE RAM (Manual Parity Generation) */ - uint64_t p_int_ate_ram_mp[1024]; /* 0x012000-0x013fff */ - - char _pad_014000[0x18000 - 0x014000]; - - /* 0x18000-0x197F8 -- PIC Write Request Ram */ - uint64_t p_wr_req_lower[256]; /* 0x18000 - 0x187F8 */ - uint64_t p_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */ - uint64_t p_wr_req_parity[256]; /* 0x19000 - 0x197F8 */ - - char _pad_019800[0x20000 - 0x019800]; - - /* 0x020000-0x027FFF -- PCI Device Configuration Spaces */ - union { - uint8_t c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */ - uint16_t s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */ - uint32_t l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */ - uint64_t d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */ - union { - uint8_t c[0x100 / 1]; - uint16_t s[0x100 / 2]; - uint32_t l[0x100 / 4]; - uint64_t d[0x100 / 8]; - } f[8]; - } p_type0_cfg_dev[8]; /* 0x02{0000,,,7FFF} */ - - /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */ - union { - uint8_t c[0x1000 / 1]; /* 0x028000-0x029000 */ - uint16_t s[0x1000 / 2]; /* 0x028000-0x029000 */ - uint32_t l[0x1000 / 4]; /* 0x028000-0x029000 */ - uint64_t d[0x1000 / 8]; /* 0x028000-0x029000 */ - union { - uint8_t c[0x100 / 1]; - uint16_t s[0x100 / 2]; - uint32_t l[0x100 / 4]; - uint64_t d[0x100 / 8]; - } f[8]; - } p_type1_cfg; /* 0x028000-0x029000 */ - - char _pad_029000[0x030000-0x029000]; - - /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */ - union { - uint8_t c[8 / 1]; - uint16_t s[8 / 2]; - uint32_t l[8 / 4]; - uint64_t d[8 / 8]; - } p_pci_iack; /* 0x030000-0x030007 */ - - char _pad_030007[0x040000-0x030008]; - - /* 0x040000-0x030007 -- PCIX Special Cycle */ - union { - uint8_t c[8 / 1]; - uint16_t s[8 / 2]; - uint32_t l[8 / 4]; - uint64_t d[8 / 8]; - } p_pcix_cycle; /* 0x040000-0x040007 */ -}; - -#endif /* _ASM_IA64_SN_PCI_PIC_H */ diff --git a/arch/ia64/sn/include/pci/tiocp.h b/arch/ia64/sn/include/pci/tiocp.h deleted file mode 100644 index f07c83b2bf6e..000000000000 --- a/arch/ia64/sn/include/pci/tiocp.h +++ /dev/null @@ -1,256 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003-2004 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_PCI_TIOCP_H -#define _ASM_IA64_SN_PCI_TIOCP_H - -#define TIOCP_HOST_INTR_ADDR 0x003FFFFFFFFFFFFFUL -#define TIOCP_PCI64_CMDTYPE_MEM (0x1ull << 60) - - -/***************************************************************************** - *********************** TIOCP MMR structure mapping *************************** - *****************************************************************************/ - -struct tiocp{ - - /* 0x000000-0x00FFFF -- Local Registers */ - - /* 0x000000-0x000057 -- (Legacy Widget Space) Configuration */ - uint64_t cp_id; /* 0x000000 */ - uint64_t cp_stat; /* 0x000008 */ - uint64_t cp_err_upper; /* 0x000010 */ - uint64_t cp_err_lower; /* 0x000018 */ - #define cp_err cp_err_lower - uint64_t cp_control; /* 0x000020 */ - uint64_t cp_req_timeout; /* 0x000028 */ - uint64_t cp_intr_upper; /* 0x000030 */ - uint64_t cp_intr_lower; /* 0x000038 */ - #define cp_intr cp_intr_lower - uint64_t cp_err_cmdword; /* 0x000040 */ - uint64_t _pad_000048; /* 0x000048 */ - uint64_t cp_tflush; /* 0x000050 */ - - /* 0x000058-0x00007F -- Bridge-specific Configuration */ - uint64_t cp_aux_err; /* 0x000058 */ - uint64_t cp_resp_upper; /* 0x000060 */ - uint64_t cp_resp_lower; /* 0x000068 */ - #define cp_resp cp_resp_lower - uint64_t cp_tst_pin_ctrl; /* 0x000070 */ - uint64_t cp_addr_lkerr; /* 0x000078 */ - - /* 0x000080-0x00008F -- PMU & MAP */ - uint64_t cp_dir_map; /* 0x000080 */ - uint64_t _pad_000088; /* 0x000088 */ - - /* 0x000090-0x00009F -- SSRAM */ - uint64_t cp_map_fault; /* 0x000090 */ - uint64_t _pad_000098; /* 0x000098 */ - - /* 0x0000A0-0x0000AF -- Arbitration */ - uint64_t cp_arb; /* 0x0000A0 */ - uint64_t _pad_0000A8; /* 0x0000A8 */ - - /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */ - uint64_t cp_ate_parity_err; /* 0x0000B0 */ - uint64_t _pad_0000B8; /* 0x0000B8 */ - - /* 0x0000C0-0x0000FF -- PCI/GIO */ - uint64_t cp_bus_timeout; /* 0x0000C0 */ - uint64_t cp_pci_cfg; /* 0x0000C8 */ - uint64_t cp_pci_err_upper; /* 0x0000D0 */ - uint64_t cp_pci_err_lower; /* 0x0000D8 */ - #define cp_pci_err cp_pci_err_lower - uint64_t _pad_0000E0[4]; /* 0x0000{E0..F8} */ - - /* 0x000100-0x0001FF -- Interrupt */ - uint64_t cp_int_status; /* 0x000100 */ - uint64_t cp_int_enable; /* 0x000108 */ - uint64_t cp_int_rst_stat; /* 0x000110 */ - uint64_t cp_int_mode; /* 0x000118 */ - uint64_t cp_int_device; /* 0x000120 */ - uint64_t cp_int_host_err; /* 0x000128 */ - uint64_t cp_int_addr[8]; /* 0x0001{30,,,68} */ - uint64_t cp_err_int_view; /* 0x000170 */ - uint64_t cp_mult_int; /* 0x000178 */ - uint64_t cp_force_always[8]; /* 0x0001{80,,,B8} */ - uint64_t cp_force_pin[8]; /* 0x0001{C0,,,F8} */ - - /* 0x000200-0x000298 -- Device */ - uint64_t cp_device[4]; /* 0x0002{00,,,18} */ - uint64_t _pad_000220[4]; /* 0x0002{20,,,38} */ - uint64_t cp_wr_req_buf[4]; /* 0x0002{40,,,58} */ - uint64_t _pad_000260[4]; /* 0x0002{60,,,78} */ - uint64_t cp_rrb_map[2]; /* 0x0002{80,,,88} */ - #define cp_even_resp cp_rrb_map[0] /* 0x000280 */ - #define cp_odd_resp cp_rrb_map[1] /* 0x000288 */ - uint64_t cp_resp_status; /* 0x000290 */ - uint64_t cp_resp_clear; /* 0x000298 */ - - uint64_t _pad_0002A0[12]; /* 0x0002{A0..F8} */ - - /* 0x000300-0x0003F8 -- Buffer Address Match Registers */ - struct { - uint64_t upper; /* 0x0003{00,,,F0} */ - uint64_t lower; /* 0x0003{08,,,F8} */ - } cp_buf_addr_match[16]; - - /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */ - struct { - uint64_t flush_w_touch; /* 0x000{400,,,5C0} */ - uint64_t flush_wo_touch; /* 0x000{408,,,5C8} */ - uint64_t inflight; /* 0x000{410,,,5D0} */ - uint64_t prefetch; /* 0x000{418,,,5D8} */ - uint64_t total_pci_retry; /* 0x000{420,,,5E0} */ - uint64_t max_pci_retry; /* 0x000{428,,,5E8} */ - uint64_t max_latency; /* 0x000{430,,,5F0} */ - uint64_t clear_all; /* 0x000{438,,,5F8} */ - } cp_buf_count[8]; - - - /* 0x000600-0x0009FF -- PCI/X registers */ - uint64_t cp_pcix_bus_err_addr; /* 0x000600 */ - uint64_t cp_pcix_bus_err_attr; /* 0x000608 */ - uint64_t cp_pcix_bus_err_data; /* 0x000610 */ - uint64_t cp_pcix_pio_split_addr; /* 0x000618 */ - uint64_t cp_pcix_pio_split_attr; /* 0x000620 */ - uint64_t cp_pcix_dma_req_err_attr; /* 0x000628 */ - uint64_t cp_pcix_dma_req_err_addr; /* 0x000630 */ - uint64_t cp_pcix_timeout; /* 0x000638 */ - - uint64_t _pad_000640[24]; /* 0x000{640,,,6F8} */ - - /* 0x000700-0x000737 -- Debug Registers */ - uint64_t cp_ct_debug_ctl; /* 0x000700 */ - uint64_t cp_br_debug_ctl; /* 0x000708 */ - uint64_t cp_mux3_debug_ctl; /* 0x000710 */ - uint64_t cp_mux4_debug_ctl; /* 0x000718 */ - uint64_t cp_mux5_debug_ctl; /* 0x000720 */ - uint64_t cp_mux6_debug_ctl; /* 0x000728 */ - uint64_t cp_mux7_debug_ctl; /* 0x000730 */ - - uint64_t _pad_000738[89]; /* 0x000{738,,,9F8} */ - - /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */ - struct { - uint64_t cp_buf_addr; /* 0x000{A00,,,AF0} */ - uint64_t cp_buf_attr; /* 0X000{A08,,,AF8} */ - } cp_pcix_read_buf_64[16]; - - struct { - uint64_t cp_buf_addr; /* 0x000{B00,,,BE0} */ - uint64_t cp_buf_attr; /* 0x000{B08,,,BE8} */ - uint64_t cp_buf_valid; /* 0x000{B10,,,BF0} */ - uint64_t __pad1; /* 0x000{B18,,,BF8} */ - } cp_pcix_write_buf_64[8]; - - /* End of Local Registers -- Start of Address Map space */ - - char _pad_000c00[0x010000 - 0x000c00]; - - /* 0x010000-0x011FF8 -- Internal ATE RAM (Auto Parity Generation) */ - uint64_t cp_int_ate_ram[1024]; /* 0x010000-0x011FF8 */ - - char _pad_012000[0x14000 - 0x012000]; - - /* 0x014000-0x015FF8 -- Internal ATE RAM (Manual Parity Generation) */ - uint64_t cp_int_ate_ram_mp[1024]; /* 0x014000-0x015FF8 */ - - char _pad_016000[0x18000 - 0x016000]; - - /* 0x18000-0x197F8 -- TIOCP Write Request Ram */ - uint64_t cp_wr_req_lower[256]; /* 0x18000 - 0x187F8 */ - uint64_t cp_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */ - uint64_t cp_wr_req_parity[256]; /* 0x19000 - 0x197F8 */ - - char _pad_019800[0x1C000 - 0x019800]; - - /* 0x1C000-0x1EFF8 -- TIOCP Read Response Ram */ - uint64_t cp_rd_resp_lower[512]; /* 0x1C000 - 0x1CFF8 */ - uint64_t cp_rd_resp_upper[512]; /* 0x1D000 - 0x1DFF8 */ - uint64_t cp_rd_resp_parity[512]; /* 0x1E000 - 0x1EFF8 */ - - char _pad_01F000[0x20000 - 0x01F000]; - - /* 0x020000-0x021FFF -- Host Device (CP) Configuration Space (not used) */ - char _pad_020000[0x021000 - 0x20000]; - - /* 0x021000-0x027FFF -- PCI Device Configuration Spaces */ - union { - uint8_t c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */ - uint16_t s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */ - uint32_t l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */ - uint64_t d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */ - union { - uint8_t c[0x100 / 1]; - uint16_t s[0x100 / 2]; - uint32_t l[0x100 / 4]; - uint64_t d[0x100 / 8]; - } f[8]; - } cp_type0_cfg_dev[7]; /* 0x02{1000,,,7FFF} */ - - /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */ - union { - uint8_t c[0x1000 / 1]; /* 0x028000-0x029000 */ - uint16_t s[0x1000 / 2]; /* 0x028000-0x029000 */ - uint32_t l[0x1000 / 4]; /* 0x028000-0x029000 */ - uint64_t d[0x1000 / 8]; /* 0x028000-0x029000 */ - union { - uint8_t c[0x100 / 1]; - uint16_t s[0x100 / 2]; - uint32_t l[0x100 / 4]; - uint64_t d[0x100 / 8]; - } f[8]; - } cp_type1_cfg; /* 0x028000-0x029000 */ - - char _pad_029000[0x030000-0x029000]; - - /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */ - union { - uint8_t c[8 / 1]; - uint16_t s[8 / 2]; - uint32_t l[8 / 4]; - uint64_t d[8 / 8]; - } cp_pci_iack; /* 0x030000-0x030007 */ - - char _pad_030007[0x040000-0x030008]; - - /* 0x040000-0x040007 -- PCIX Special Cycle */ - union { - uint8_t c[8 / 1]; - uint16_t s[8 / 2]; - uint32_t l[8 / 4]; - uint64_t d[8 / 8]; - } cp_pcix_cycle; /* 0x040000-0x040007 */ - - char _pad_040007[0x200000-0x040008]; - - /* 0x200000-0x7FFFFF -- PCI/GIO Device Spaces */ - union { - uint8_t c[0x100000 / 1]; - uint16_t s[0x100000 / 2]; - uint32_t l[0x100000 / 4]; - uint64_t d[0x100000 / 8]; - } cp_devio_raw[6]; /* 0x200000-0x7FFFFF */ - - #define cp_devio(n) cp_devio_raw[((n)<2)?(n*2):(n+2)] - - char _pad_800000[0xA00000-0x800000]; - - /* 0xA00000-0xBFFFFF -- PCI/GIO Device Spaces w/flush */ - union { - uint8_t c[0x100000 / 1]; - uint16_t s[0x100000 / 2]; - uint32_t l[0x100000 / 4]; - uint64_t d[0x100000 / 8]; - } cp_devio_raw_flush[6]; /* 0xA00000-0xBFFFFF */ - - #define cp_devio_flush(n) cp_devio_raw_flush[((n)<2)?(n*2):(n+2)] - -}; - -#endif /* _ASM_IA64_SN_PCI_TIOCP_H */ diff --git a/arch/ia64/sn/include/xtalk/hubdev.h b/arch/ia64/sn/include/xtalk/hubdev.h index 868e7ecae84b..580a1c0403a7 100644 --- a/arch/ia64/sn/include/xtalk/hubdev.h +++ b/arch/ia64/sn/include/xtalk/hubdev.h @@ -8,6 +8,8 @@ #ifndef _ASM_IA64_SN_XTALK_HUBDEV_H #define _ASM_IA64_SN_XTALK_HUBDEV_H +#include "xtalk/xwidgetdev.h" + #define HUB_WIDGET_ID_MAX 0xf #define DEV_PER_WIDGET (2*2*8) #define IIO_ITTE_WIDGET_BITS 4 /* size of widget field */ diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 9e07f5463f21..a6649baf629a 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -9,21 +9,28 @@ #include <linux/bootmem.h> #include <linux/nodemask.h> #include <asm/sn/types.h> -#include <asm/sn/sn_sal.h> #include <asm/sn/addrs.h> -#include <asm/sn/pcibus_provider_defs.h> -#include <asm/sn/pcidev.h> -#include "pci/pcibr_provider.h" -#include "xtalk/xwidgetdev.h" #include <asm/sn/geo.h> -#include "xtalk/hubdev.h" #include <asm/sn/io.h> +#include <asm/sn/pcibr_provider.h> +#include <asm/sn/pcibus_provider_defs.h> +#include <asm/sn/pcidev.h> #include <asm/sn/simulator.h> +#include <asm/sn/sn_sal.h> #include <asm/sn/tioca_provider.h> +#include "xtalk/hubdev.h" +#include "xtalk/xwidgetdev.h" -char master_baseio_wid; nasid_t master_nasid = INVALID_NASID; /* Partition Master */ +static struct list_head sn_sysdata_list; + +/* sysdata list struct */ +struct sysdata_el { + struct list_head entry; + void *sysdata; +}; + struct slab_info { struct hubdev_info hubdev; }; @@ -54,7 +61,7 @@ sn_default_pci_unmap(struct pci_dev *pdev, dma_addr_t addr, int direction) } static void * -sn_default_pci_bus_fixup(struct pcibus_bussoft *soft) +sn_default_pci_bus_fixup(struct pcibus_bussoft *soft, struct pci_controller *controller) { return NULL; } @@ -138,23 +145,6 @@ sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev, } /* - * sn_alloc_pci_sysdata() - This routine allocates a pci controller - * which is expected as the pci_dev and pci_bus sysdata by the Linux - * PCI infrastructure. - */ -static inline struct pci_controller *sn_alloc_pci_sysdata(void) -{ - struct pci_controller *pci_sysdata; - - pci_sysdata = kmalloc(sizeof(*pci_sysdata), GFP_KERNEL); - if (!pci_sysdata) - BUG(); - - memset(pci_sysdata, 0, sizeof(*pci_sysdata)); - return pci_sysdata; -} - -/* * sn_fixup_ionodes() - This routine initializes the HUB data strcuture for * each node in the system. */ @@ -221,22 +211,34 @@ static void sn_fixup_ionodes(void) } +void sn_pci_unfixup_slot(struct pci_dev *dev) +{ + struct pci_dev *host_pci_dev = SN_PCIDEV_INFO(dev)->host_pci_dev; + + sn_irq_unfixup(dev); + pci_dev_put(host_pci_dev); + pci_dev_put(dev); +} + /* * sn_pci_fixup_slot() - This routine sets up a slot's resources * consistent with the Linux PCI abstraction layer. Resources acquired * from our PCI provider include PIO maps to BAR space and interrupt * objects. */ -static void sn_pci_fixup_slot(struct pci_dev *dev) +void sn_pci_fixup_slot(struct pci_dev *dev) { int idx; int segment = 0; - uint64_t size; - struct sn_irq_info *sn_irq_info; - struct pci_dev *host_pci_dev; int status = 0; struct pcibus_bussoft *bs; + struct pci_bus *host_pci_bus; + struct pci_dev *host_pci_dev; + struct sn_irq_info *sn_irq_info; + unsigned long size; + unsigned int bus_no, devfn; + pci_dev_get(dev); /* for the sysdata pointer */ dev->sysdata = kmalloc(sizeof(struct pcidev_info), GFP_KERNEL); if (SN_PCIDEV_INFO(dev) <= 0) BUG(); /* Cannot afford to run out of memory */ @@ -253,7 +255,7 @@ static void sn_pci_fixup_slot(struct pci_dev *dev) (u64) __pa(SN_PCIDEV_INFO(dev)), (u64) __pa(sn_irq_info)); if (status) - BUG(); /* Cannot get platform pci device information information */ + BUG(); /* Cannot get platform pci device information */ /* Copy over PIO Mapped Addresses */ for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) { @@ -275,15 +277,21 @@ static void sn_pci_fixup_slot(struct pci_dev *dev) dev->resource[idx].parent = &iomem_resource; } - /* set up host bus linkages */ - bs = SN_PCIBUS_BUSSOFT(dev->bus); - host_pci_dev = - pci_find_slot(SN_PCIDEV_INFO(dev)->pdi_slot_host_handle >> 32, - SN_PCIDEV_INFO(dev)-> - pdi_slot_host_handle & 0xffffffff); + /* + * Using the PROMs values for the PCI host bus, get the Linux + * PCI host_pci_dev struct and set up host bus linkages + */ + + bus_no = SN_PCIDEV_INFO(dev)->pdi_slot_host_handle >> 32; + devfn = SN_PCIDEV_INFO(dev)->pdi_slot_host_handle & 0xffffffff; + host_pci_bus = pci_find_bus(pci_domain_nr(dev->bus), bus_no); + host_pci_dev = pci_get_slot(host_pci_bus, devfn); + + SN_PCIDEV_INFO(dev)->host_pci_dev = host_pci_dev; SN_PCIDEV_INFO(dev)->pdi_host_pcidev_info = - SN_PCIDEV_INFO(host_pci_dev); + SN_PCIDEV_INFO(host_pci_dev); SN_PCIDEV_INFO(dev)->pdi_linux_pcidev = dev; + bs = SN_PCIBUS_BUSSOFT(dev->bus); SN_PCIDEV_INFO(dev)->pdi_pcibus_info = bs; if (bs && bs->bs_asic_type < PCIIO_ASIC_MAX_TYPES) { @@ -297,6 +305,9 @@ static void sn_pci_fixup_slot(struct pci_dev *dev) SN_PCIDEV_INFO(dev)->pdi_sn_irq_info = sn_irq_info; dev->irq = SN_PCIDEV_INFO(dev)->pdi_sn_irq_info->irq_irq; sn_irq_fixup(dev, sn_irq_info); + } else { + SN_PCIDEV_INFO(dev)->pdi_sn_irq_info = NULL; + kfree(sn_irq_info); } } @@ -304,55 +315,57 @@ static void sn_pci_fixup_slot(struct pci_dev *dev) * sn_pci_controller_fixup() - This routine sets up a bus's resources * consistent with the Linux PCI abstraction layer. */ -static void sn_pci_controller_fixup(int segment, int busnum) +void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) { int status = 0; int nasid, cnode; - struct pci_bus *bus; struct pci_controller *controller; struct pcibus_bussoft *prom_bussoft_ptr; struct hubdev_info *hubdev_info; void *provider_soft; struct sn_pcibus_provider *provider; - status = - sal_get_pcibus_info((u64) segment, (u64) busnum, - (u64) ia64_tpa(&prom_bussoft_ptr)); - if (status > 0) { - return; /* bus # does not exist */ - } - + status = sal_get_pcibus_info((u64) segment, (u64) busnum, + (u64) ia64_tpa(&prom_bussoft_ptr)); + if (status > 0) + return; /*bus # does not exist */ prom_bussoft_ptr = __va(prom_bussoft_ptr); - controller = sn_alloc_pci_sysdata(); - /* controller non-zero is BUG'd in sn_alloc_pci_sysdata */ - bus = pci_scan_bus(busnum, &pci_root_ops, controller); + controller = kcalloc(1,sizeof(struct pci_controller), GFP_KERNEL); + if (!controller) + BUG(); + if (bus == NULL) { - return; /* error, or bus already scanned */ + bus = pci_scan_bus(busnum, &pci_root_ops, controller); + if (bus == NULL) + return; /* error, or bus already scanned */ + bus->sysdata = NULL; } + if (bus->sysdata) + goto error_return; /* sysdata already alloc'd */ + /* * Per-provider fixup. Copies the contents from prom to local * area and links SN_PCIBUS_BUSSOFT(). */ - if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES) { + if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES) return; /* unsupported asic type */ - } + + if (prom_bussoft_ptr->bs_asic_type == PCIIO_ASIC_TYPE_PPB) + goto error_return; /* no further fixup necessary */ provider = sn_pci_provider[prom_bussoft_ptr->bs_asic_type]; - if (provider == NULL) { + if (provider == NULL) return; /* no provider registerd for this asic */ - } provider_soft = NULL; - if (provider->bus_fixup) { - provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr); - } + if (provider->bus_fixup) + provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr, controller); - if (provider_soft == NULL) { + if (provider_soft == NULL) return; /* fixup failed or not applicable */ - } /* * Generic bus fixup goes here. Don't reference prom_bussoft_ptr @@ -361,12 +374,63 @@ static void sn_pci_controller_fixup(int segment, int busnum) bus->sysdata = controller; PCI_CONTROLLER(bus)->platform_data = provider_soft; - nasid = NASID_GET(SN_PCIBUS_BUSSOFT(bus)->bs_base); cnode = nasid_to_cnodeid(nasid); hubdev_info = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo); SN_PCIBUS_BUSSOFT(bus)->bs_xwidget_info = &(hubdev_info->hdi_xwidget_info[SN_PCIBUS_BUSSOFT(bus)->bs_xid]); + + /* + * If the node information we obtained during the fixup phase is invalid + * then set controller->node to -1 (undetermined) + */ + if (controller->node >= num_online_nodes()) { + struct pcibus_bussoft *b = SN_PCIBUS_BUSSOFT(bus); + + printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%lu" + "L_IO=%lx L_MEM=%lx BASE=%lx\n", + b->bs_asic_type, b->bs_xid, b->bs_persist_busnum, + b->bs_legacy_io, b->bs_legacy_mem, b->bs_base); + printk(KERN_WARNING "on node %d but only %d nodes online." + "Association set to undetermined.\n", + controller->node, num_online_nodes()); + controller->node = -1; + } + return; + +error_return: + + kfree(controller); + return; +} + +void sn_bus_store_sysdata(struct pci_dev *dev) +{ + struct sysdata_el *element; + + element = kcalloc(1, sizeof(struct sysdata_el), GFP_KERNEL); + if (!element) { + dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__); + return; + } + element->sysdata = dev->sysdata; + list_add(&element->entry, &sn_sysdata_list); +} + +void sn_bus_free_sysdata(void) +{ + struct sysdata_el *element; + struct list_head *list; + +sn_sysdata_free_start: + list_for_each(list, &sn_sysdata_list) { + element = list_entry(list, struct sysdata_el, entry); + list_del(&element->entry); + kfree(element->sysdata); + kfree(element); + goto sn_sysdata_free_start; + } + return; } /* @@ -384,7 +448,7 @@ static int __init sn_pci_init(void) extern void register_sn_procfs(void); #endif - if (!ia64_platform_is("sn2") || IS_RUNNING_ON_SIMULATOR()) + if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM()) return 0; /* @@ -403,20 +467,17 @@ static int __init sn_pci_init(void) */ ia64_max_iommu_merge_mask = ~PAGE_MASK; sn_fixup_ionodes(); - sn_irq = kmalloc(sizeof(struct sn_irq_info *) * NR_IRQS, GFP_KERNEL); - if (sn_irq <= 0) - BUG(); /* Canno afford to run out of memory. */ - memset(sn_irq, 0, sizeof(struct sn_irq_info *) * NR_IRQS); - + sn_irq_lh_init(); + INIT_LIST_HEAD(&sn_sysdata_list); sn_init_cpei_timer(); #ifdef CONFIG_PROC_FS register_sn_procfs(); #endif - for (i = 0; i < PCI_BUSES_TO_SCAN; i++) { - sn_pci_controller_fixup(0, i); - } + /* busses are not known yet ... */ + for (i = 0; i < PCI_BUSES_TO_SCAN; i++) + sn_pci_controller_fixup(0, i, NULL); /* * Generic Linux PCI Layer has created the pci_bus and pci_dev @@ -425,9 +486,8 @@ static int __init sn_pci_init(void) */ while ((pci_dev = - pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pci_dev)) != NULL) { + pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_dev)) != NULL) sn_pci_fixup_slot(pci_dev); - } sn_ioif_inited = 1; /* sn I/O infrastructure now initialized */ @@ -469,3 +529,8 @@ cnodeid_get_geoid(cnodeid_t cnode) } subsys_initcall(sn_pci_init); +EXPORT_SYMBOL(sn_pci_fixup_slot); +EXPORT_SYMBOL(sn_pci_unfixup_slot); +EXPORT_SYMBOL(sn_pci_controller_fixup); +EXPORT_SYMBOL(sn_bus_store_sysdata); +EXPORT_SYMBOL(sn_bus_free_sysdata); diff --git a/arch/ia64/sn/kernel/iomv.c b/arch/ia64/sn/kernel/iomv.c index fec6d8b8237b..7ce3cdad627b 100644 --- a/arch/ia64/sn/kernel/iomv.c +++ b/arch/ia64/sn/kernel/iomv.c @@ -9,12 +9,16 @@ #include <linux/module.h> #include <asm/io.h> #include <asm/delay.h> +#include <asm/vga.h> #include <asm/sn/nodepda.h> #include <asm/sn/simulator.h> #include <asm/sn/pda.h> #include <asm/sn/sn_cpuid.h> #include <asm/sn/shub_mmr.h> +#define IS_LEGACY_VGA_IOPORT(p) \ + (((p) >= 0x3b0 && (p) <= 0x3bb) || ((p) >= 0x3c0 && (p) <= 0x3df)) + /** * sn_io_addr - convert an in/out port to an i/o address * @port: port to convert @@ -26,6 +30,8 @@ void *sn_io_addr(unsigned long port) { if (!IS_RUNNING_ON_SIMULATOR()) { + if (IS_LEGACY_VGA_IOPORT(port)) + port += vga_console_iobase; /* On sn2, legacy I/O ports don't point at anything */ if (port < (64 * 1024)) return NULL; diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 0f4e8138658f..84d276a14ecb 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -9,13 +9,13 @@ */ #include <linux/irq.h> -#include <asm/sn/intr.h> +#include <linux/spinlock.h> #include <asm/sn/addrs.h> #include <asm/sn/arch.h> -#include "xtalk/xwidgetdev.h" +#include <asm/sn/intr.h> +#include <asm/sn/pcibr_provider.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/pcidev.h> -#include "pci/pcibr_provider.h" #include <asm/sn/shub_mmr.h> #include <asm/sn/sn_sal.h> @@ -25,7 +25,8 @@ static void unregister_intr_pda(struct sn_irq_info *sn_irq_info); extern int sn_force_interrupt_flag; extern int sn_ioif_inited; -struct sn_irq_info **sn_irq; +static struct list_head **sn_irq_lh; +static spinlock_t sn_irq_info_lock = SPIN_LOCK_UNLOCKED; /* non-IRQ lock */ static inline uint64_t sn_intr_alloc(nasid_t local_nasid, int local_widget, u64 sn_irq_info, @@ -101,7 +102,7 @@ static void sn_end_irq(unsigned int irq) nasid = get_nasid(); event_occurred = HUB_L((uint64_t *) GLOBAL_MMR_ADDR (nasid, SH_EVENT_OCCURRED)); - /* If the UART bit is set here, we may have received an + /* If the UART bit is set here, we may have received an * interrupt from the UART that the driver missed. To * make sure, we IPI ourselves to force us to look again. */ @@ -115,82 +116,84 @@ static void sn_end_irq(unsigned int irq) force_interrupt(irq); } +static void sn_irq_info_free(struct rcu_head *head); + static void sn_set_affinity_irq(unsigned int irq, cpumask_t mask) { - struct sn_irq_info *sn_irq_info = sn_irq[irq]; - struct sn_irq_info *tmp_sn_irq_info; + struct sn_irq_info *sn_irq_info, *sn_irq_info_safe; int cpuid, cpuphys; - nasid_t t_nasid; /* nasid to target */ - int t_slice; /* slice to target */ - - /* allocate a temp sn_irq_info struct to get new target info */ - tmp_sn_irq_info = kmalloc(sizeof(*tmp_sn_irq_info), GFP_KERNEL); - if (!tmp_sn_irq_info) - return; cpuid = first_cpu(mask); cpuphys = cpu_physical_id(cpuid); - t_nasid = cpuid_to_nasid(cpuid); - t_slice = cpuid_to_slice(cpuid); - while (sn_irq_info) { - int status; - int local_widget; - uint64_t bridge = (uint64_t) sn_irq_info->irq_bridge; - nasid_t local_nasid = NASID_GET(bridge); + list_for_each_entry_safe(sn_irq_info, sn_irq_info_safe, + sn_irq_lh[irq], list) { + uint64_t bridge; + int local_widget, status; + nasid_t local_nasid; + struct sn_irq_info *new_irq_info; + + new_irq_info = kmalloc(sizeof(struct sn_irq_info), GFP_ATOMIC); + if (new_irq_info == NULL) + break; + memcpy(new_irq_info, sn_irq_info, sizeof(struct sn_irq_info)); + + bridge = (uint64_t) new_irq_info->irq_bridge; + if (!bridge) { + kfree(new_irq_info); + break; /* irq is not a device interrupt */ + } - if (!bridge) - break; /* irq is not a device interrupt */ + local_nasid = NASID_GET(bridge); if (local_nasid & 1) local_widget = TIO_SWIN_WIDGETNUM(bridge); else local_widget = SWIN_WIDGETNUM(bridge); - /* Free the old PROM sn_irq_info structure */ - sn_intr_free(local_nasid, local_widget, sn_irq_info); + /* Free the old PROM new_irq_info structure */ + sn_intr_free(local_nasid, local_widget, new_irq_info); + /* Update kernels new_irq_info with new target info */ + unregister_intr_pda(new_irq_info); - /* allocate a new PROM sn_irq_info struct */ + /* allocate a new PROM new_irq_info struct */ status = sn_intr_alloc(local_nasid, local_widget, - __pa(tmp_sn_irq_info), irq, t_nasid, - t_slice); - - if (status == 0) { - /* Update kernels sn_irq_info with new target info */ - unregister_intr_pda(sn_irq_info); - sn_irq_info->irq_cpuid = cpuid; - sn_irq_info->irq_nasid = t_nasid; - sn_irq_info->irq_slice = t_slice; - sn_irq_info->irq_xtalkaddr = - tmp_sn_irq_info->irq_xtalkaddr; - sn_irq_info->irq_cookie = tmp_sn_irq_info->irq_cookie; - register_intr_pda(sn_irq_info); - - if (IS_PCI_BRIDGE_ASIC(sn_irq_info->irq_bridge_type)) { - pcibr_change_devices_irq(sn_irq_info); - } + __pa(new_irq_info), irq, + cpuid_to_nasid(cpuid), + cpuid_to_slice(cpuid)); + + /* SAL call failed */ + if (status) { + kfree(new_irq_info); + break; + } + + new_irq_info->irq_cpuid = cpuid; + register_intr_pda(new_irq_info); + + if (IS_PCI_BRIDGE_ASIC(new_irq_info->irq_bridge_type)) + pcibr_change_devices_irq(new_irq_info); - sn_irq_info = sn_irq_info->irq_next; + spin_lock(&sn_irq_info_lock); + list_replace_rcu(&sn_irq_info->list, &new_irq_info->list); + spin_unlock(&sn_irq_info_lock); + call_rcu(&sn_irq_info->rcu, sn_irq_info_free); #ifdef CONFIG_SMP - set_irq_affinity_info((irq & 0xff), cpuphys, 0); + set_irq_affinity_info((irq & 0xff), cpuphys, 0); #endif - } else { - break; /* snp_affinity failed the intr_alloc */ - } } - kfree(tmp_sn_irq_info); } struct hw_interrupt_type irq_type_sn = { - "SN hub", - sn_startup_irq, - sn_shutdown_irq, - sn_enable_irq, - sn_disable_irq, - sn_ack_irq, - sn_end_irq, - sn_set_affinity_irq + .typename = "SN hub", + .startup = sn_startup_irq, + .shutdown = sn_shutdown_irq, + .enable = sn_enable_irq, + .disable = sn_disable_irq, + .ack = sn_ack_irq, + .end = sn_end_irq, + .set_affinity = sn_set_affinity_irq }; unsigned int sn_local_vector_to_irq(u8 vector) @@ -231,19 +234,18 @@ static void unregister_intr_pda(struct sn_irq_info *sn_irq_info) struct sn_irq_info *tmp_irq_info; int i, foundmatch; + rcu_read_lock(); if (pdacpu(cpu)->sn_last_irq == irq) { foundmatch = 0; - for (i = pdacpu(cpu)->sn_last_irq - 1; i; i--) { - tmp_irq_info = sn_irq[i]; - while (tmp_irq_info) { + for (i = pdacpu(cpu)->sn_last_irq - 1; + i && !foundmatch; i--) { + list_for_each_entry_rcu(tmp_irq_info, + sn_irq_lh[i], + list) { if (tmp_irq_info->irq_cpuid == cpu) { - foundmatch++; + foundmatch = 1; break; } - tmp_irq_info = tmp_irq_info->irq_next; - } - if (foundmatch) { - break; } } pdacpu(cpu)->sn_last_irq = i; @@ -251,60 +253,27 @@ static void unregister_intr_pda(struct sn_irq_info *sn_irq_info) if (pdacpu(cpu)->sn_first_irq == irq) { foundmatch = 0; - for (i = pdacpu(cpu)->sn_first_irq + 1; i < NR_IRQS; i++) { - tmp_irq_info = sn_irq[i]; - while (tmp_irq_info) { + for (i = pdacpu(cpu)->sn_first_irq + 1; + i < NR_IRQS && !foundmatch; i++) { + list_for_each_entry_rcu(tmp_irq_info, + sn_irq_lh[i], + list) { if (tmp_irq_info->irq_cpuid == cpu) { - foundmatch++; + foundmatch = 1; break; } - tmp_irq_info = tmp_irq_info->irq_next; - } - if (foundmatch) { - break; } } pdacpu(cpu)->sn_first_irq = ((i == NR_IRQS) ? 0 : i); } + rcu_read_unlock(); } -struct sn_irq_info *sn_irq_alloc(nasid_t local_nasid, int local_widget, int irq, - nasid_t nasid, int slice) +static void sn_irq_info_free(struct rcu_head *head) { struct sn_irq_info *sn_irq_info; - int status; - - sn_irq_info = kmalloc(sizeof(*sn_irq_info), GFP_KERNEL); - if (sn_irq_info == NULL) - return NULL; - - memset(sn_irq_info, 0x0, sizeof(*sn_irq_info)); - - status = - sn_intr_alloc(local_nasid, local_widget, __pa(sn_irq_info), irq, - nasid, slice); - - if (status) { - kfree(sn_irq_info); - return NULL; - } else { - return sn_irq_info; - } -} - -void sn_irq_free(struct sn_irq_info *sn_irq_info) -{ - uint64_t bridge = (uint64_t) sn_irq_info->irq_bridge; - nasid_t local_nasid = NASID_GET(bridge); - int local_widget; - - if (local_nasid & 1) /* tio check */ - local_widget = TIO_SWIN_WIDGETNUM(bridge); - else - local_widget = SWIN_WIDGETNUM(bridge); - - sn_intr_free(local_nasid, local_widget, sn_irq_info); + sn_irq_info = container_of(head, struct sn_irq_info, rcu); kfree(sn_irq_info); } @@ -314,30 +283,54 @@ void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info) int slice = sn_irq_info->irq_slice; int cpu = nasid_slice_to_cpuid(nasid, slice); + pci_dev_get(pci_dev); sn_irq_info->irq_cpuid = cpu; sn_irq_info->irq_pciioinfo = SN_PCIDEV_INFO(pci_dev); /* link it into the sn_irq[irq] list */ - sn_irq_info->irq_next = sn_irq[sn_irq_info->irq_irq]; - sn_irq[sn_irq_info->irq_irq] = sn_irq_info; + spin_lock(&sn_irq_info_lock); + list_add_rcu(&sn_irq_info->list, sn_irq_lh[sn_irq_info->irq_irq]); + spin_unlock(&sn_irq_info_lock); (void)register_intr_pda(sn_irq_info); } +void sn_irq_unfixup(struct pci_dev *pci_dev) +{ + struct sn_irq_info *sn_irq_info; + + /* Only cleanup IRQ stuff if this device has a host bus context */ + if (!SN_PCIDEV_BUSSOFT(pci_dev)) + return; + + sn_irq_info = SN_PCIDEV_INFO(pci_dev)->pdi_sn_irq_info; + if (!sn_irq_info || !sn_irq_info->irq_irq) { + kfree(sn_irq_info); + return; + } + + unregister_intr_pda(sn_irq_info); + spin_lock(&sn_irq_info_lock); + list_del_rcu(&sn_irq_info->list); + spin_unlock(&sn_irq_info_lock); + call_rcu(&sn_irq_info->rcu, sn_irq_info_free); + pci_dev_put(pci_dev); +} + static void force_interrupt(int irq) { struct sn_irq_info *sn_irq_info; if (!sn_ioif_inited) return; - sn_irq_info = sn_irq[irq]; - while (sn_irq_info) { + + rcu_read_lock(); + list_for_each_entry_rcu(sn_irq_info, sn_irq_lh[irq], list) { if (IS_PCI_BRIDGE_ASIC(sn_irq_info->irq_bridge_type) && - (sn_irq_info->irq_bridge != NULL)) { + (sn_irq_info->irq_bridge != NULL)) pcibr_force_interrupt(sn_irq_info); - } - sn_irq_info = sn_irq_info->irq_next; } + rcu_read_unlock(); } /* @@ -402,19 +395,41 @@ static void sn_check_intr(int irq, struct sn_irq_info *sn_irq_info) void sn_lb_int_war_check(void) { + struct sn_irq_info *sn_irq_info; int i; if (!sn_ioif_inited || pda->sn_first_irq == 0) return; + + rcu_read_lock(); for (i = pda->sn_first_irq; i <= pda->sn_last_irq; i++) { - struct sn_irq_info *sn_irq_info = sn_irq[i]; - while (sn_irq_info) { - /* Only call for PCI bridges that are fully initialized. */ + list_for_each_entry_rcu(sn_irq_info, sn_irq_lh[i], list) { + /* + * Only call for PCI bridges that are fully + * initialized. + */ if (IS_PCI_BRIDGE_ASIC(sn_irq_info->irq_bridge_type) && - (sn_irq_info->irq_bridge != NULL)) { + (sn_irq_info->irq_bridge != NULL)) sn_check_intr(i, sn_irq_info); - } - sn_irq_info = sn_irq_info->irq_next; } } + rcu_read_unlock(); +} + +void sn_irq_lh_init(void) +{ + int i; + + sn_irq_lh = kmalloc(sizeof(struct list_head *) * NR_IRQS, GFP_KERNEL); + if (!sn_irq_lh) + panic("SN PCI INIT: Failed to allocate memory for PCI init\n"); + + for (i = 0; i < NR_IRQS; i++) { + sn_irq_lh[i] = kmalloc(sizeof(struct list_head), GFP_KERNEL); + if (!sn_irq_lh[i]) + panic("SN PCI INIT: Failed IRQ memory allocation\n"); + + INIT_LIST_HEAD(sn_irq_lh[i]); + } + } diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 44bfc7f318cb..7c7fe441d623 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -36,6 +36,7 @@ #include <asm/machvec.h> #include <asm/system.h> #include <asm/processor.h> +#include <asm/vga.h> #include <asm/sn/arch.h> #include <asm/sn/addrs.h> #include <asm/sn/pda.h> @@ -95,6 +96,7 @@ u8 sn_coherency_id; EXPORT_SYMBOL(sn_coherency_id); u8 sn_region_size; EXPORT_SYMBOL(sn_region_size); +int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */ short physical_node_map[MAX_PHYSNODE_ID]; @@ -268,19 +270,22 @@ void __init sn_setup(char **cmdline_p) { long status, ticks_per_sec, drift; int pxm; - int major = sn_sal_rev_major(), minor = sn_sal_rev_minor(); + u32 version = sn_sal_rev(); extern void sn_cpu_init(void); ia64_sn_plat_set_error_handling_features(); +#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) /* - * If the generic code has enabled vga console support - lets - * get rid of it again. This is a kludge for the fact that ACPI - * currtently has no way of informing us if legacy VGA is available - * or not. + * If there was a primary vga adapter identified through the + * EFI PCDP table, make it the preferred console. Otherwise + * zero out conswitchp. */ -#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) - if (conswitchp == &vga_con) { + + if (vga_console_membase) { + /* usable vga ... make tty0 the preferred default console */ + add_preferred_console("tty", 0, NULL); + } else { printk(KERN_DEBUG "SGI: Disabling VGA console\n"); #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; @@ -303,22 +308,21 @@ void __init sn_setup(char **cmdline_p) * support here so we don't have to listen to failed keyboard probe * messages. */ - if ((major < 2 || (major == 2 && minor <= 9)) && - acpi_kbd_controller_present) { + if (version <= 0x0209 && acpi_kbd_controller_present) { printk(KERN_INFO "Disabling legacy keyboard support as prom " "is too old and doesn't provide FADT\n"); acpi_kbd_controller_present = 0; } - printk("SGI SAL version %x.%02x\n", major, minor); + printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF); /* * Confirm the SAL we're running on is recent enough... */ - if ((major < SN_SAL_MIN_MAJOR) || (major == SN_SAL_MIN_MAJOR && - minor < SN_SAL_MIN_MINOR)) { + if (version < SN_SAL_MIN_VERSION) { printk(KERN_ERR "This kernel needs SGI SAL version >= " - "%x.%02x\n", SN_SAL_MIN_MAJOR, SN_SAL_MIN_MINOR); + "%x.%02x\n", SN_SAL_MIN_VERSION >> 8, + SN_SAL_MIN_VERSION & 0x00FF); panic("PROM version too old\n"); } @@ -350,7 +354,7 @@ void __init sn_setup(char **cmdline_p) ia64_mark_idle = &snidle; - /* + /* * For the bootcpu, we do this here. All other cpus will make the * call as part of cpu_init in slave cpu initialization. */ @@ -397,7 +401,7 @@ static void __init sn_init_pdas(char **cmdline_p) nodepdaindr[cnode] = alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t)); memset(nodepdaindr[cnode], 0, sizeof(nodepda_t)); - memset(nodepdaindr[cnode]->phys_cpuid, -1, + memset(nodepdaindr[cnode]->phys_cpuid, -1, sizeof(nodepdaindr[cnode]->phys_cpuid)); } @@ -427,7 +431,7 @@ static void __init sn_init_pdas(char **cmdline_p) } /* - * Initialize the per node hubdev. This includes IO Nodes and + * Initialize the per node hubdev. This includes IO Nodes and * headless/memless nodes. */ for (cnode = 0; cnode < numionodes; cnode++) { @@ -455,6 +459,14 @@ void __init sn_cpu_init(void) int i; static int wars_have_been_checked; + if (smp_processor_id() == 0 && IS_MEDUSA()) { + if (ia64_sn_is_fake_prom()) + sn_prom_type = 2; + else + sn_prom_type = 1; + printk("Running on medusa with %s PROM\n", (sn_prom_type == 1) ? "real" : "fake"); + } + memset(pda, 0, sizeof(pda)); if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2, &sn_hub_info->nasid_bitmask, &sn_hub_info->nasid_shift, &sn_system_size, &sn_sharing_domain_size, &sn_partition_id, @@ -520,7 +532,7 @@ void __init sn_cpu_init(void) */ { u64 pio1[] = {SH1_PIO_WRITE_STATUS_0, 0, SH1_PIO_WRITE_STATUS_1, 0}; - u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_1, + u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_1, SH2_PIO_WRITE_STATUS_2, SH2_PIO_WRITE_STATUS_3}; u64 *pio; pio = is_shub1() ? pio1 : pio2; @@ -552,6 +564,10 @@ static void __init scan_for_ionodes(void) int nasid = 0; lboard_t *brd; + /* fakeprom does not support klgraph */ + if (IS_RUNNING_ON_FAKE_PROM()) + return; + /* Setup ionodes with memory */ for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { char *klgraph_header; @@ -563,8 +579,6 @@ static void __init scan_for_ionodes(void) cnodeid = -1; klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid)); if (!klgraph_header) { - if (IS_RUNNING_ON_SIMULATOR()) - continue; BUG(); /* All nodes must have klconfig tables! */ } cnodeid = nasid_to_cnodeid(nasid); @@ -630,8 +644,8 @@ int nasid_slice_to_cpuid(int nasid, int slice) { long cpu; - - for (cpu=0; cpu < NR_CPUS; cpu++) + + for (cpu=0; cpu < NR_CPUS; cpu++) if (cpuid_to_nasid(cpu) == nasid && cpuid_to_slice(cpu) == slice) return cpu; diff --git a/arch/ia64/sn/kernel/sn2/ptc_deadlock.S b/arch/ia64/sn/kernel/sn2/ptc_deadlock.S index 7947312801ec..96cb71d15682 100644 --- a/arch/ia64/sn/kernel/sn2/ptc_deadlock.S +++ b/arch/ia64/sn/kernel/sn2/ptc_deadlock.S @@ -6,6 +6,7 @@ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. */ +#include <asm/types.h> #include <asm/sn/shub_mmr.h> #define DEADLOCKBIT SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index a087b274847e..254fe15c064b 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -8,12 +8,12 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/version.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/proc_fs.h> #include <linux/device.h> #include <linux/delay.h> +#include <asm/system.h> #include <asm/uaccess.h> #include <asm/sn/sn_sal.h> #include <asm/sn/addrs.h> @@ -204,8 +204,8 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num, cx_dev->dev.parent = NULL; cx_dev->dev.bus = &tiocx_bus_type; cx_dev->dev.release = tiocx_bus_release; - snprintf(cx_dev->dev.bus_id, BUS_ID_SIZE, "%d.0x%x", - cx_dev->cx_id.nasid, cx_dev->cx_id.part_num); + snprintf(cx_dev->dev.bus_id, BUS_ID_SIZE, "%d", + cx_dev->cx_id.nasid); device_register(&cx_dev->dev); get_device(&cx_dev->dev); @@ -236,7 +236,6 @@ int cx_device_unregister(struct cx_dev *cx_dev) */ static int cx_device_reload(struct cx_dev *cx_dev) { - device_remove_file(&cx_dev->dev, &dev_attr_cxdev_control); cx_device_unregister(cx_dev); return cx_device_register(cx_dev->cx_id.nasid, cx_dev->cx_id.part_num, cx_dev->cx_id.mfg_num, cx_dev->hubdev); @@ -383,6 +382,7 @@ static int is_fpga_brick(int nasid) switch (tiocx_btchar_get(nasid)) { case L1_BRICKTYPE_SA: case L1_BRICKTYPE_ATHENA: + case L1_BRICKTYPE_DAYTONA: return 1; } return 0; @@ -409,7 +409,7 @@ static int tiocx_reload(struct cx_dev *cx_dev) uint64_t cx_id; cx_id = - *(volatile int32_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) + + *(volatile uint64_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) + WIDGET_ID); part_num = XWIDGET_PART_NUM(cx_id); mfg_num = XWIDGET_MFG_NUM(cx_id); @@ -458,6 +458,10 @@ static ssize_t store_cxdev_control(struct device *dev, struct device_attribute * switch (n) { case 1: + tio_corelet_reset(cx_dev->cx_id.nasid, TIOCX_CORELET); + tiocx_reload(cx_dev); + break; + case 2: tiocx_reload(cx_dev); break; case 3: @@ -477,6 +481,9 @@ static int __init tiocx_init(void) cnodeid_t cnodeid; int found_tiocx_device = 0; + if (!ia64_platform_is("sn2")) + return -ENODEV; + bus_register(&tiocx_bus_type); for (cnodeid = 0; cnodeid < MAX_COMPACT_NODES; cnodeid++) { @@ -537,7 +544,7 @@ static void __exit tiocx_exit(void) bus_unregister(&tiocx_bus_type); } -module_init(tiocx_init); +subsys_initcall(tiocx_init); module_exit(tiocx_exit); /************************************************************************ diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h index 1a0aed8490d1..d0ee635daf2e 100644 --- a/arch/ia64/sn/kernel/xpc.h +++ b/arch/ia64/sn/kernel/xpc.h @@ -87,7 +87,7 @@ struct xpc_rsvd_page { u8 partid; /* partition ID from SAL */ u8 version; u8 pad[6]; /* pad to u64 align */ - u64 vars_pa; + volatile u64 vars_pa; u64 part_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned; u64 mach_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned; }; @@ -138,7 +138,7 @@ struct xpc_vars { * occupies half a cacheline. */ struct xpc_vars_part { - u64 magic; + volatile u64 magic; u64 openclose_args_pa; /* physical address of open and close args */ u64 GPs_pa; /* physical address of Get/Put values */ @@ -185,8 +185,8 @@ struct xpc_vars_part { * Define a Get/Put value pair (pointers) used with a message queue. */ struct xpc_gp { - s64 get; /* Get value */ - s64 put; /* Put value */ + volatile s64 get; /* Get value */ + volatile s64 put; /* Put value */ }; #define XPC_GP_SIZE \ @@ -231,7 +231,7 @@ struct xpc_openclose_args { */ struct xpc_notify { struct semaphore sema; /* notify semaphore */ - u8 type; /* type of notification */ + volatile u8 type; /* type of notification */ /* the following two fields are only used if type == XPC_N_CALL */ xpc_notify_func func; /* user's notify function */ @@ -439,7 +439,7 @@ struct xpc_partition { /* XPC infrastructure referencing and teardown control */ - u8 setup_state; /* infrastructure setup state */ + volatile u8 setup_state; /* infrastructure setup state */ wait_queue_head_t teardown_wq; /* kthread waiting to teardown infra */ atomic_t references; /* #of references to infrastructure */ diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c index 0bf6fbcc46d2..94698bea7be0 100644 --- a/arch/ia64/sn/kernel/xpc_channel.c +++ b/arch/ia64/sn/kernel/xpc_channel.c @@ -72,7 +72,7 @@ xpc_initialize_channels(struct xpc_partition *part, partid_t partid) enum xpc_retval xpc_setup_infrastructure(struct xpc_partition *part) { - int ret; + int ret, cpuid; struct timer_list *timer; partid_t partid = XPC_PARTID(part); @@ -209,7 +209,7 @@ xpc_setup_infrastructure(struct xpc_partition *part) * With the setting of the partition setup_state to XPC_P_SETUP, we're * declaring that this partition is ready to go. */ - (volatile u8) part->setup_state = XPC_P_SETUP; + part->setup_state = XPC_P_SETUP; /* @@ -223,11 +223,11 @@ xpc_setup_infrastructure(struct xpc_partition *part) xpc_vars_part[partid].openclose_args_pa = __pa(part->local_openclose_args); xpc_vars_part[partid].IPI_amo_pa = __pa(part->local_IPI_amo_va); - xpc_vars_part[partid].IPI_nasid = cpuid_to_nasid(smp_processor_id()); - xpc_vars_part[partid].IPI_phys_cpuid = - cpu_physical_id(smp_processor_id()); + cpuid = raw_smp_processor_id(); /* any CPU in this partition will do */ + xpc_vars_part[partid].IPI_nasid = cpuid_to_nasid(cpuid); + xpc_vars_part[partid].IPI_phys_cpuid = cpu_physical_id(cpuid); xpc_vars_part[partid].nchannels = part->nchannels; - (volatile u64) xpc_vars_part[partid].magic = XPC_VP_MAGIC1; + xpc_vars_part[partid].magic = XPC_VP_MAGIC1; return xpcSuccess; } @@ -355,7 +355,7 @@ xpc_pull_remote_vars_part(struct xpc_partition *part) /* let the other side know that we've pulled their variables */ - (volatile u64) xpc_vars_part[partid].magic = XPC_VP_MAGIC2; + xpc_vars_part[partid].magic = XPC_VP_MAGIC2; } if (pulled_entry->magic == XPC_VP_MAGIC1) { @@ -1183,7 +1183,7 @@ xpc_process_msg_IPI(struct xpc_partition *part, int ch_number) */ xpc_clear_local_msgqueue_flags(ch); - (volatile s64) ch->w_remote_GP.get = ch->remote_GP.get; + ch->w_remote_GP.get = ch->remote_GP.get; dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, " "channel=%d\n", ch->w_remote_GP.get, ch->partid, @@ -1211,7 +1211,7 @@ xpc_process_msg_IPI(struct xpc_partition *part, int ch_number) */ xpc_clear_remote_msgqueue_flags(ch); - (volatile s64) ch->w_remote_GP.put = ch->remote_GP.put; + ch->w_remote_GP.put = ch->remote_GP.put; dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, " "channel=%d\n", ch->w_remote_GP.put, ch->partid, @@ -1875,7 +1875,7 @@ xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type, notify = &ch->notify_queue[msg_number % ch->local_nentries]; notify->func = func; notify->key = key; - (volatile u8) notify->type = notify_type; + notify->type = notify_type; // >>> is a mb() needed here? diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index 177ddb748ebe..bb1d5cf30440 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -53,6 +53,7 @@ #include <linux/cache.h> #include <linux/interrupt.h> #include <linux/slab.h> +#include <linux/delay.h> #include <asm/sn/intr.h> #include <asm/sn/sn_sal.h> #include <asm/uaccess.h> @@ -308,8 +309,7 @@ xpc_make_first_contact(struct xpc_partition *part) "partition %d\n", XPC_PARTID(part)); /* wait a 1/4 of a second or so */ - set_current_state(TASK_INTERRUPTIBLE); - (void) schedule_timeout(0.25 * HZ); + msleep_interruptible(250); if (part->act_state == XPC_P_DEACTIVATING) { return part->reason; @@ -420,7 +420,7 @@ xpc_activating(void *__partid) partid_t partid = (u64) __partid; struct xpc_partition *part = &xpc_partitions[partid]; unsigned long irq_flags; - struct sched_param param = { sched_priority: MAX_USER_RT_PRIO - 1 }; + struct sched_param param = { sched_priority: MAX_RT_PRIO - 1 }; int ret; @@ -841,9 +841,7 @@ xpc_do_exit(void) down(&xpc_discovery_exited); - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(0.3 * HZ); - set_current_state(TASK_RUNNING); + msleep_interruptible(300); /* wait for all partitions to become inactive */ @@ -860,12 +858,8 @@ xpc_do_exit(void) } } - if (active_part_count) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(0.3 * HZ); - set_current_state(TASK_RUNNING); - } - + if (active_part_count) + msleep_interruptible(300); } while (active_part_count > 0); diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index cd7ed73f0e7a..578265ea9e67 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -253,7 +253,7 @@ xpc_rsvd_page_init(void) * This signifies to the remote partition that our reserved * page is initialized. */ - (volatile u64) rp->vars_pa = __pa(xpc_vars); + rp->vars_pa = __pa(xpc_vars); return rp; } diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c index 5da9bdbde7cb..0e4b9ad9ef02 100644 --- a/arch/ia64/sn/pci/pci_dma.c +++ b/arch/ia64/sn/pci/pci_dma.c @@ -11,9 +11,10 @@ #include <linux/module.h> #include <asm/dma.h> -#include <asm/sn/sn_sal.h> +#include <asm/sn/pcibr_provider.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/pcidev.h> +#include <asm/sn/sn_sal.h> #define SG_ENT_VIRT_ADDRESS(sg) (page_address((sg)->page) + (sg)->offset) #define SG_ENT_PHYS_ADDRESS(SG) virt_to_phys(SG_ENT_VIRT_ADDRESS(SG)) @@ -78,6 +79,7 @@ void *sn_dma_alloc_coherent(struct device *dev, size_t size, { void *cpuaddr; unsigned long phys_addr; + int node; struct pci_dev *pdev = to_pci_dev(dev); struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev); @@ -85,10 +87,19 @@ void *sn_dma_alloc_coherent(struct device *dev, size_t size, /* * Allocate the memory. - * FIXME: We should be doing alloc_pages_node for the node closest - * to the PCI device. */ - if (!(cpuaddr = (void *)__get_free_pages(GFP_ATOMIC, get_order(size)))) + node = pcibus_to_node(pdev->bus); + if (likely(node >=0)) { + struct page *p = alloc_pages_node(node, GFP_ATOMIC, get_order(size)); + + if (likely(p)) + cpuaddr = page_address(p); + else + return NULL; + } else + cpuaddr = (void *)__get_free_pages(GFP_ATOMIC, get_order(size)); + + if (unlikely(!cpuaddr)) return NULL; memset(cpuaddr, 0x0, size); diff --git a/arch/ia64/sn/pci/pcibr/pcibr_ate.c b/arch/ia64/sn/pci/pcibr/pcibr_ate.c index 0e47bce85f2d..d1647b863e61 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_ate.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_ate.c @@ -8,9 +8,9 @@ #include <linux/types.h> #include <asm/sn/sn_sal.h> +#include <asm/sn/pcibr_provider.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/pcidev.h> -#include "pci/pcibr_provider.h" int pcibr_invalidate_ate = 0; /* by default don't invalidate ATE on free */ diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c index 64af2b2c1787..b058dc2a0b9d 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c @@ -8,18 +8,17 @@ #include <linux/types.h> #include <linux/pci.h> -#include <asm/sn/sn_sal.h> +#include <asm/sn/addrs.h> #include <asm/sn/geo.h> -#include "xtalk/xwidgetdev.h" -#include "xtalk/hubdev.h" +#include <asm/sn/pcibr_provider.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/pcidev.h> -#include "pci/tiocp.h" -#include "pci/pic.h" -#include "pci/pcibr_provider.h" -#include "pci/tiocp.h" +#include <asm/sn/pic.h> +#include <asm/sn/sn_sal.h> +#include <asm/sn/tiocp.h> #include "tio.h" -#include <asm/sn/addrs.h> +#include "xtalk/xwidgetdev.h" +#include "xtalk/hubdev.h" extern int sn_ioif_inited; diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c index 3893999d23d8..b95e928636a1 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c @@ -6,18 +6,51 @@ * Copyright (C) 2001-2004 Silicon Graphics, Inc. All rights reserved. */ -#include <linux/types.h> #include <linux/interrupt.h> +#include <linux/types.h> #include <linux/pci.h> -#include <asm/sn/sn_sal.h> -#include "xtalk/xwidgetdev.h" +#include <asm/sn/addrs.h> #include <asm/sn/geo.h> -#include "xtalk/hubdev.h" +#include <asm/sn/pcibr_provider.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/pcidev.h> -#include "pci/pcibr_provider.h" -#include <asm/sn/addrs.h> +#include <asm/sn/sn_sal.h> +#include "xtalk/xwidgetdev.h" +#include "xtalk/hubdev.h" + +int +sal_pcibr_slot_enable(struct pcibus_info *soft, int device, void *resp) +{ + struct ia64_sal_retval ret_stuff; + uint64_t busnum; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + busnum = soft->pbi_buscommon.bs_persist_busnum; + SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_SLOT_ENABLE, (u64) busnum, + (u64) device, (u64) resp, 0, 0, 0, 0); + + return (int)ret_stuff.v0; +} + +int +sal_pcibr_slot_disable(struct pcibus_info *soft, int device, int action, + void *resp) +{ + struct ia64_sal_retval ret_stuff; + uint64_t busnum; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + + busnum = soft->pbi_buscommon.bs_persist_busnum; + SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_SLOT_DISABLE, + (u64) busnum, (u64) device, (u64) action, + (u64) resp, 0, 0, 0); + + return (int)ret_stuff.v0; +} static int sal_pcibr_error_interrupt(struct pcibus_info *soft) { @@ -52,7 +85,7 @@ pcibr_error_intr_handler(int irq, void *arg, struct pt_regs *regs) } void * -pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft) +pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller) { int nasid, cnode, j; struct hubdev_info *hubdev_info; @@ -125,6 +158,14 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft) memset(soft->pbi_int_ate_resource.ate, 0, (soft->pbi_int_ate_size * sizeof(uint64_t))); + if (prom_bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) + /* + * TIO PCI Bridge with no closest node information. + * FIXME: Find another way to determine the closest node + */ + controller->node = -1; + else + controller->node = cnode; return soft; } @@ -188,3 +229,6 @@ pcibr_init_provider(void) return 0; } + +EXPORT_SYMBOL_GPL(sal_pcibr_slot_enable); +EXPORT_SYMBOL_GPL(sal_pcibr_slot_disable); diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c index 865c11c3b50a..21426d02fbe6 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_reg.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c @@ -6,13 +6,13 @@ * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved. */ -#include <linux/types.h> #include <linux/interrupt.h> +#include <linux/types.h> +#include <asm/sn/pcibr_provider.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/pcidev.h> -#include "pci/tiocp.h" -#include "pci/pic.h" -#include "pci/pcibr_provider.h" +#include <asm/sn/pic.h> +#include <asm/sn/tiocp.h> union br_ptr { struct tiocp tio; diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index 8dae9eb45456..5d76a7581465 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -336,7 +336,7 @@ tioca_dma_d48(struct pci_dev *pdev, uint64_t paddr) if (!ct_addr) return 0; - bus_addr = (dma_addr_t) (ct_addr & 0xffffffffffff); + bus_addr = (dma_addr_t) (ct_addr & 0xffffffffffffUL); node_upper = ct_addr >> 48; if (node_upper > 64) { @@ -464,7 +464,7 @@ map_return: * For mappings created using the direct modes (64 or 48) there are no * resources to release. */ -void +static void tioca_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) { int i, entry; @@ -514,7 +514,7 @@ tioca_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) * The mapping mode used is based on the devices dma_mask. As a last resort * use the GART mapped mode. */ -uint64_t +static uint64_t tioca_dma_map(struct pci_dev *pdev, uint64_t paddr, size_t byte_count) { uint64_t mapaddr; @@ -580,8 +580,8 @@ tioca_error_intr_handler(int irq, void *arg, struct pt_regs *pt) * On successful setup, returns the kernel version of tioca_common back to * the caller. */ -void * -tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft) +static void * +tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller) { struct tioca_common *tioca_common; struct tioca_kernel *tioca_kern; @@ -589,8 +589,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft) /* sanity check prom rev */ - if (sn_sal_rev_major() < 4 || - (sn_sal_rev_major() == 4 && sn_sal_rev_minor() < 6)) { + if (sn_sal_rev() < 0x0406) { printk (KERN_ERR "%s: SGI prom rev 4.06 or greater required " "for tioca support\n", __FUNCTION__); @@ -647,6 +646,8 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft) __FUNCTION__, SGI_TIOCA_ERROR, (int)tioca_common->ca_common.bs_persist_busnum); + /* Setup locality information */ + controller->node = tioca_kern->ca_closest_node; return tioca_common; } diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 64c133344afe..7772951df313 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -172,11 +172,13 @@ config NOHIGHMEM bool default y -config DISCONTIGMEM +config ARCH_DISCONTIGMEM_ENABLE bool "Internal RAM Support" depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP default y +source "mm/Kconfig" + config IRAM_START hex "Internal memory start address (hex)" default "00f00000" @@ -357,6 +359,8 @@ source "fs/Kconfig.binfmt" endmenu +source "net/Kconfig" + source "drivers/Kconfig" source "fs/Kconfig" diff --git a/arch/m32r/Kconfig.debug b/arch/m32r/Kconfig.debug index 36788c2c310d..31039723804f 100644 --- a/arch/m32r/Kconfig.debug +++ b/arch/m32r/Kconfig.debug @@ -5,6 +5,9 @@ source "lib/Kconfig.debug" config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL + help + This option will cause messages to be printed if free stack space + drops below a certain limit. config DEBUG_STACK_USAGE bool "Stack utilization instrumentation" diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c index b556c3cf6495..ea13a8f4d8b0 100644 --- a/arch/m32r/kernel/process.c +++ b/arch/m32r/kernel/process.c @@ -115,8 +115,6 @@ void machine_restart(char *__unused) cpu_relax(); } -EXPORT_SYMBOL(machine_restart); - void machine_halt(void) { printk("Please push reset button!\n"); @@ -124,15 +122,11 @@ void machine_halt(void) cpu_relax(); } -EXPORT_SYMBOL(machine_halt); - void machine_power_off(void) { /* M32R_FIXME */ } -EXPORT_SYMBOL(machine_power_off); - static int __init idle_setup (char *str) { if (!strncmp(str, "poll", 4)) { diff --git a/arch/m32r/kernel/setup_m32700ut.c b/arch/m32r/kernel/setup_m32700ut.c index b014e2c1e524..a146b24a556b 100644 --- a/arch/m32r/kernel/setup_m32700ut.c +++ b/arch/m32r/kernel/setup_m32700ut.c @@ -3,8 +3,8 @@ * * Setup routines for Renesas M32700UT Board * - * Copyright (c) 2002 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Takeo Takahashi + * Copyright (c) 2002-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi * * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of this @@ -435,7 +435,7 @@ void __init init_IRQ(void) icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; enable_m32700ut_irq(M32R_IRQ_INT2); -//#if defined(CONFIG_VIDEO_M32R_AR) +#if defined(CONFIG_VIDEO_M32R_AR) /* * INT3# is used for AR */ @@ -445,9 +445,11 @@ void __init init_IRQ(void) irq_desc[M32R_IRQ_INT3].depth = 1; icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; disable_m32700ut_irq(M32R_IRQ_INT3); -//#endif /* CONFIG_VIDEO_M32R_AR */ +#endif /* CONFIG_VIDEO_M32R_AR */ } +#if defined(CONFIG_SMC91X) + #define LAN_IOSTART 0x300 #define LAN_IOEND 0x320 static struct resource smc91x_resources[] = { @@ -469,10 +471,55 @@ static struct platform_device smc91x_device = { .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; +#endif + +#if defined(CONFIG_FB_S1D13XXX) + +#include <video/s1d13xxxfb.h> +#include <asm/s1d13806.h> + +static struct s1d13xxxfb_pdata s1d13xxxfb_data = { + .initregs = s1d13xxxfb_initregs, + .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), + .platform_init_video = NULL, +#ifdef CONFIG_PM + .platform_suspend_video = NULL, + .platform_resume_video = NULL, +#endif +}; + +static struct resource s1d13xxxfb_resources[] = { + [0] = { + .start = 0x10600000UL, + .end = 0x1073FFFFUL, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x10400000UL, + .end = 0x104001FFUL, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device s1d13xxxfb_device = { + .name = S1D_DEVICENAME, + .id = 0, + .dev = { + .platform_data = &s1d13xxxfb_data, + }, + .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), + .resource = s1d13xxxfb_resources, +}; +#endif static int __init platform_init(void) { +#if defined(CONFIG_SMC91X) platform_device_register(&smc91x_device); +#endif +#if defined(CONFIG_FB_S1D13XXX) + platform_device_register(&s1d13xxxfb_device); +#endif return 0; } arch_initcall(platform_init); diff --git a/arch/m32r/kernel/setup_mappi.c b/arch/m32r/kernel/setup_mappi.c index aaf8e569b930..4e709809efc5 100644 --- a/arch/m32r/kernel/setup_mappi.c +++ b/arch/m32r/kernel/setup_mappi.c @@ -3,14 +3,15 @@ * * Setup routines for Renesas MAPPI Board * - * Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto */ #include <linux/config.h> #include <linux/irq.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/device.h> #include <asm/system.h> #include <asm/m32r.h> @@ -158,3 +159,49 @@ void __init init_IRQ(void) disable_mappi_irq(M32R_IRQ_INT2); #endif /* CONFIG_M32RPCC */ } + +#if defined(CONFIG_FB_S1D13XXX) + +#include <video/s1d13xxxfb.h> +#include <asm/s1d13806.h> + +static struct s1d13xxxfb_pdata s1d13xxxfb_data = { + .initregs = s1d13xxxfb_initregs, + .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), + .platform_init_video = NULL, +#ifdef CONFIG_PM + .platform_suspend_video = NULL, + .platform_resume_video = NULL, +#endif +}; + +static struct resource s1d13xxxfb_resources[] = { + [0] = { + .start = 0x10200000UL, + .end = 0x1033FFFFUL, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x10000000UL, + .end = 0x100001FFUL, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device s1d13xxxfb_device = { + .name = S1D_DEVICENAME, + .id = 0, + .dev = { + .platform_data = &s1d13xxxfb_data, + }, + .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), + .resource = s1d13xxxfb_resources, +}; + +static int __init platform_init(void) +{ + platform_device_register(&s1d13xxxfb_device); + return 0; +} +arch_initcall(platform_init); +#endif diff --git a/arch/m32r/kernel/setup_mappi2.c b/arch/m32r/kernel/setup_mappi2.c index 38d5e9a41427..a1d801598aa4 100644 --- a/arch/m32r/kernel/setup_mappi2.c +++ b/arch/m32r/kernel/setup_mappi2.c @@ -3,8 +3,8 @@ * * Setup routines for Renesas MAPPI-II(M3A-ZA36) Board * - * Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Mamoru Sakugawa + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa */ #include <linux/config.h> diff --git a/arch/m32r/kernel/setup_mappi3.c b/arch/m32r/kernel/setup_mappi3.c index 3d60a85aaec5..a76412e883e8 100644 --- a/arch/m32r/kernel/setup_mappi3.c +++ b/arch/m32r/kernel/setup_mappi3.c @@ -3,8 +3,8 @@ * * Setup routines for Renesas MAPPI-III(M3A-2170) Board * - * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Mamoru Sakugawa + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa */ #include <linux/config.h> @@ -178,6 +178,8 @@ void __init init_IRQ(void) #endif /* CONFIG_M32R_CFC */ } +#if defined(CONFIG_SMC91X) + #define LAN_IOSTART 0x300 #define LAN_IOEND 0x320 static struct resource smc91x_resources[] = { @@ -200,9 +202,55 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +#endif + +#if defined(CONFIG_FB_S1D13XXX) + +#include <video/s1d13xxxfb.h> +#include <asm/s1d13806.h> + +static struct s1d13xxxfb_pdata s1d13xxxfb_data = { + .initregs = s1d13xxxfb_initregs, + .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), + .platform_init_video = NULL, +#ifdef CONFIG_PM + .platform_suspend_video = NULL, + .platform_resume_video = NULL, +#endif +}; + +static struct resource s1d13xxxfb_resources[] = { + [0] = { + .start = 0x1d600000UL, + .end = 0x1d73FFFFUL, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x1d400000UL, + .end = 0x1d4001FFUL, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device s1d13xxxfb_device = { + .name = S1D_DEVICENAME, + .id = 0, + .dev = { + .platform_data = &s1d13xxxfb_data, + }, + .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), + .resource = s1d13xxxfb_resources, +}; +#endif + static int __init platform_init(void) { +#if defined(CONFIG_SMC91X) platform_device_register(&smc91x_device); +#endif +#if defined(CONFIG_FB_S1D13XXX) + platform_device_register(&s1d13xxxfb_device); +#endif return 0; } arch_initcall(platform_init); diff --git a/arch/m32r/kernel/setup_oaks32r.c b/arch/m32r/kernel/setup_oaks32r.c index d656640badc9..45add5b76f19 100644 --- a/arch/m32r/kernel/setup_oaks32r.c +++ b/arch/m32r/kernel/setup_oaks32r.c @@ -3,8 +3,8 @@ * * Setup routines for OAKS32R Board * - * Copyright (c) 2002-2004 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Mamoru Sakugawa + * Copyright (c) 2002-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa */ #include <linux/config.h> @@ -139,5 +139,4 @@ void __init init_IRQ(void) icu_data[M32R_IRQ_SIO1_S].icucr = 0; disable_oaks32r_irq(M32R_IRQ_SIO1_S); #endif /* CONFIG_SERIAL_M32R_SIO */ - } diff --git a/arch/m32r/kernel/setup_opsput.c b/arch/m32r/kernel/setup_opsput.c index 86f4cf2a86c3..f0301f58bcce 100644 --- a/arch/m32r/kernel/setup_opsput.c +++ b/arch/m32r/kernel/setup_opsput.c @@ -3,7 +3,7 @@ * * Setup routines for Renesas OPSPUT Board * - * Copyright (c) 2002-2004 + * Copyright (c) 2002-2005 * Hiroyuki Kondo, Hirokazu Takata, * Hitoshi Yamamoto, Takeo Takahashi, Mamoru Sakugawa * @@ -439,7 +439,7 @@ void __init init_IRQ(void) icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; enable_opsput_irq(M32R_IRQ_INT2); -//#if defined(CONFIG_VIDEO_M32R_AR) +#if defined(CONFIG_VIDEO_M32R_AR) /* * INT3# is used for AR */ @@ -449,9 +449,11 @@ void __init init_IRQ(void) irq_desc[M32R_IRQ_INT3].depth = 1; icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; disable_opsput_irq(M32R_IRQ_INT3); -//#endif /* CONFIG_VIDEO_M32R_AR */ +#endif /* CONFIG_VIDEO_M32R_AR */ } +#if defined(CONFIG_SMC91X) + #define LAN_IOSTART 0x300 #define LAN_IOEND 0x320 static struct resource smc91x_resources[] = { @@ -473,10 +475,55 @@ static struct platform_device smc91x_device = { .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; +#endif + +#if defined(CONFIG_FB_S1D13XXX) + +#include <video/s1d13xxxfb.h> +#include <asm/s1d13806.h> + +static struct s1d13xxxfb_pdata s1d13xxxfb_data = { + .initregs = s1d13xxxfb_initregs, + .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), + .platform_init_video = NULL, +#ifdef CONFIG_PM + .platform_suspend_video = NULL, + .platform_resume_video = NULL, +#endif +}; + +static struct resource s1d13xxxfb_resources[] = { + [0] = { + .start = 0x10600000UL, + .end = 0x1073FFFFUL, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x10400000UL, + .end = 0x104001FFUL, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device s1d13xxxfb_device = { + .name = S1D_DEVICENAME, + .id = 0, + .dev = { + .platform_data = &s1d13xxxfb_data, + }, + .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), + .resource = s1d13xxxfb_resources, +}; +#endif static int __init platform_init(void) { +#if defined(CONFIG_SMC91X) platform_device_register(&smc91x_device); +#endif +#if defined(CONFIG_FB_S1D13XXX) + platform_device_register(&s1d13xxxfb_device); +#endif return 0; } arch_initcall(platform_init); diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c index 50311eb07a24..5aef7e406ef5 100644 --- a/arch/m32r/kernel/signal.c +++ b/arch/m32r/kernel/signal.c @@ -371,10 +371,8 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) if (!user_mode(regs)) return 1; - if (current->flags & PF_FREEZE) { - refrigerator(0); + if (try_to_freeze()) goto no_signal; - } if (!oldset) oldset = ¤t->blocked; diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c index 3c4707280a52..8a2b77bc5749 100644 --- a/arch/m32r/kernel/time.c +++ b/arch/m32r/kernel/time.c @@ -205,8 +205,7 @@ static long last_rtc_update = 0; * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -static inline void -do_timer_interrupt(int irq, void *dev_id, struct pt_regs * regs) +irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { #ifndef CONFIG_SMP profile_tick(CPU_PROFILING, regs); @@ -221,6 +220,7 @@ do_timer_interrupt(int irq, void *dev_id, struct pt_regs * regs) * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ + write_seqlock(&xtime_lock); if ((time_status & STA_UNSYNC) == 0 && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned)TICK_SIZE) / 2 @@ -231,6 +231,7 @@ do_timer_interrupt(int irq, void *dev_id, struct pt_regs * regs) else /* do it again in 60 s */ last_rtc_update = xtime.tv_sec - 600; } + write_sequnlock(&xtime_lock); /* As we return to user mode fire off the other CPU schedulers.. this is basically because we don't yet share IRQ's around. This message is rigged to be safe on the 386 - basically it's @@ -238,14 +239,8 @@ do_timer_interrupt(int irq, void *dev_id, struct pt_regs * regs) #ifdef CONFIG_SMP smp_local_timer_interrupt(regs); + smp_send_timer(); #endif -} - -irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - write_seqlock(&xtime_lock); - do_timer_interrupt(irq, NULL, regs); - write_sequnlock(&xtime_lock); return IRQ_HANDLED; } diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c index bc423d838fb8..d9a40b1fe8ba 100644 --- a/arch/m32r/mm/init.c +++ b/arch/m32r/mm/init.c @@ -49,7 +49,7 @@ void show_mem(void) printk("Free swap: %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10)); for_each_pgdat(pgdat) { for (i = 0; i < pgdat->node_spanned_pages; ++i) { - page = pgdat->node_mem_map + i; + page = pgdat_page_nr(pgdat, i); total++; if (PageHighMem(page)) highmem++; @@ -152,7 +152,7 @@ int __init reservedpages_count(void) reservedpages = 0; for_each_online_node(nid) for (i = 0 ; i < MAX_LOW_PFN(nid) - START_PFN(nid) ; i++) - if (PageReserved(NODE_DATA(nid)->node_mem_map + i)) + if (PageReserved(nid_page_nr(nid, i))) reservedpages++; return reservedpages; diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index d0713c7d9f0a..178c4a3fbb72 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -357,6 +357,8 @@ config 060_WRITETHROUGH is hardwired on. The 53c710 SCSI driver is known to suffer from this problem. +source "mm/Kconfig" + endmenu menu "General setup" @@ -448,6 +450,8 @@ source "drivers/zorro/Kconfig" endmenu +source "net/Kconfig" + source "drivers/Kconfig" menu "Character devices" diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c index 93b043e2a435..11b1b90ba6ba 100644 --- a/arch/m68k/kernel/process.c +++ b/arch/m68k/kernel/process.c @@ -113,8 +113,6 @@ void machine_restart(char * __unused) for (;;); } -EXPORT_SYMBOL(machine_restart); - void machine_halt(void) { if (mach_halt) @@ -122,8 +120,6 @@ void machine_halt(void) for (;;); } -EXPORT_SYMBOL(machine_halt); - void machine_power_off(void) { if (mach_power_off) @@ -131,8 +127,6 @@ void machine_power_off(void) for (;;); } -EXPORT_SYMBOL(machine_power_off); - void show_regs(struct pt_regs * regs) { printk("\n"); diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c index ac48b6d2aff6..aec15270d334 100644 --- a/arch/m68k/mm/fault.c +++ b/arch/m68k/mm/fault.c @@ -160,13 +160,13 @@ good_area: printk("handle_mm_fault returns %d\n",fault); #endif switch (fault) { - case 1: + case VM_FAULT_MINOR: current->min_flt++; break; - case 2: + case VM_FAULT_MAJOR: current->maj_flt++; break; - case 0: + case VM_FAULT_SIGBUS: goto bus_err; default: goto out_of_memory; diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index e729bd280623..117f183f0b43 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -532,6 +532,8 @@ config ROMKERNEL endchoice +source "mm/Kconfig" + endmenu config ISA_DMA_API @@ -573,6 +575,8 @@ config PM endmenu +source "net/Kconfig" + source "drivers/Kconfig" source "fs/Kconfig" diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c index c4a33f265dc0..82e7ec888806 100644 --- a/arch/m68knommu/kernel/process.c +++ b/arch/m68knommu/kernel/process.c @@ -80,8 +80,6 @@ void machine_restart(char * __unused) for (;;); } -EXPORT_SYMBOL(machine_restart); - void machine_halt(void) { if (mach_halt) @@ -89,8 +87,6 @@ void machine_halt(void) for (;;); } -EXPORT_SYMBOL(machine_halt); - void machine_power_off(void) { if (mach_power_off) @@ -98,8 +94,6 @@ void machine_power_off(void) for (;;); } -EXPORT_SYMBOL(machine_power_off); - void show_regs(struct pt_regs * regs) { printk(KERN_NOTICE "\n"); diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ab9944693f1f..898de2df1fc7 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -492,7 +492,7 @@ config SGI_SN0_N_MODE which allows for more memory. Your system is most probably running in M-Mode, so you should say N here. -config DISCONTIGMEM +config ARCH_DISCONTIGMEM_ENABLE bool default y if SGI_IP27 help @@ -1088,41 +1088,6 @@ config ARC32 depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32 default y -config FB - bool - depends on MIPS_MAGNUM_4000 || OLIVETTI_M700 - default y - ---help--- - The frame buffer device provides an abstraction for the graphics - hardware. It represents the frame buffer of some video hardware and - allows application software to access the graphics hardware through - a well-defined interface, so the software doesn't need to know - anything about the low-level (hardware register) stuff. - - Frame buffer devices work identically across the different - architectures supported by Linux and make the implementation of - application programs easier and more portable; at this point, an X - server exists which uses the frame buffer device exclusively. - On several non-X86 architectures, the frame buffer device is the - only way to use the graphics hardware. - - The device is accessed through special device nodes, usually located - in the /dev directory, i.e. /dev/fb*. - - You need an utility program called fbset to make full use of frame - buffer devices. Please read <file:Documentation/fb/framebuffer.txt> - and the Framebuffer-HOWTO at <http://www.tldp.org/docs.html#howto> - for more information. - - Say Y here and to the driver for your graphics board below if you - are compiling a kernel for a non-x86 architecture. - - If you are compiling for the x86 architecture, you can say Y if you - want to play with it, but it is not essential. Please note that - running graphical applications that directly touch the hardware - (e.g. an accelerated X server) and that are not frame buffer - device-aware may cause unexpected results. If unsure, say N. - config HAVE_STD_PC_SERIAL_PORT bool @@ -1416,6 +1381,12 @@ config HIGHMEM bool "High Memory Support" depends on MIPS32 && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX) +config ARCH_FLATMEM_ENABLE + def_bool y + depends on !NUMA + +source "mm/Kconfig" + config SMP bool "Multi-Processing support" depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27 @@ -1634,6 +1605,8 @@ config PM endmenu +source "net/Kconfig" + source "drivers/Kconfig" source "fs/Kconfig" diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 13472292d0ec..b5bab3a42fc4 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -82,7 +82,7 @@ CONFIG_STOP_MACHINE=y # CONFIG_SGI_IP22 is not set CONFIG_SGI_IP27=y # CONFIG_SGI_SN0_N_MODE is not set -CONFIG_DISCONTIGMEM=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_NUMA=y # CONFIG_MAPPED_KERNEL is not set # CONFIG_REPLICATE_KTEXT is not set diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c index 3f956f809fa4..40244782a8e5 100644 --- a/arch/mips/kernel/irixsig.c +++ b/arch/mips/kernel/irixsig.c @@ -178,7 +178,7 @@ asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs) if (!user_mode(regs)) return 1; - if (try_to_freeze(0)) + if (try_to_freeze()) goto no_signal; if (!oldset) diff --git a/arch/mips/kernel/reset.c b/arch/mips/kernel/reset.c index 7e0a9821931a..ae2ba67b7ef6 100644 --- a/arch/mips/kernel/reset.c +++ b/arch/mips/kernel/reset.c @@ -26,18 +26,13 @@ void machine_restart(char *command) _machine_restart(command); } -EXPORT_SYMBOL(machine_restart); - void machine_halt(void) { _machine_halt(); } -EXPORT_SYMBOL(machine_halt); - void machine_power_off(void) { _machine_power_off(); } -EXPORT_SYMBOL(machine_power_off); diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 6018ca25aceb..3a240e3e004c 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -33,6 +33,7 @@ #include <linux/root_dev.h> #include <linux/highmem.h> #include <linux/console.h> +#include <linux/mmzone.h> #include <asm/addrspace.h> #include <asm/bootinfo.h> @@ -356,6 +357,8 @@ static inline void bootmem_init(void) } #endif + memory_present(0, first_usable_pfn, max_low_pfn); + /* Initialize the boot-time allocator with low memory only. */ bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn); @@ -557,6 +560,7 @@ void __init setup_arch(char **cmdline_p) parse_cmdline_early(); bootmem_init(); + sparse_init(); paging_init(); resource_init(); } diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 508026ae5842..65ee15396ffd 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -457,7 +457,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs) if (!user_mode(regs)) return 1; - if (try_to_freeze(0)) + if (try_to_freeze()) goto no_signal; if (!oldset) diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 1f3b19124c01..c1a69cf232f9 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -774,7 +774,7 @@ int do_signal32(sigset_t *oldset, struct pt_regs *regs) if (!user_mode(regs)) return 1; - if (try_to_freeze(0)) + if (try_to_freeze()) goto no_signal; if (!oldset) diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 73843c528778..9c9a271c8a3a 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -128,7 +128,7 @@ static void __init fixrange_init(unsigned long start, unsigned long end, #endif /* CONFIG_MIPS64 */ #endif /* CONFIG_HIGHMEM */ -#ifndef CONFIG_DISCONTIGMEM +#ifndef CONFIG_NEED_MULTIPLE_NODES extern void pagetable_init(void); void __init paging_init(void) @@ -253,7 +253,7 @@ void __init mem_init(void) initsize >> 10, (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))); } -#endif /* !CONFIG_DISCONTIGMEM */ +#endif /* !CONFIG_NEED_MULTIPLE_NODES */ #ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem(unsigned long start, unsigned long end) diff --git a/arch/mips/mm/pgtable.c b/arch/mips/mm/pgtable.c index 3b88fdeef329..3fe94202da8c 100644 --- a/arch/mips/mm/pgtable.c +++ b/arch/mips/mm/pgtable.c @@ -5,7 +5,7 @@ void show_mem(void) { -#ifndef CONFIG_DISCONTIGMEM /* XXX(hch): later.. */ +#ifndef CONFIG_NEED_MULTIPLE_NODES /* XXX(hch): later.. */ int pfn, total = 0, reserved = 0; int shared = 0, cached = 0; int highmem = 0; diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index 0a44a98d7adc..a160d04f7dbe 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -549,9 +549,8 @@ void __init mem_init(void) */ numslots = node_getlastslot(node); for (slot = 1; slot <= numslots; slot++) { - p = NODE_DATA(node)->node_mem_map + - (slot_getbasepfn(node, slot) - - slot_getbasepfn(node, 0)); + p = nid_page_nr(node, slot_getbasepfn(node, slot) - + slot_getbasepfn(node, 0)); /* * Free valid memory in current slot. diff --git a/arch/mips/vr41xx/common/Makefile b/arch/mips/vr41xx/common/Makefile index 92c11e9bbb3f..fa98ef3855bc 100644 --- a/arch/mips/vr41xx/common/Makefile +++ b/arch/mips/vr41xx/common/Makefile @@ -2,7 +2,7 @@ # Makefile for common code of the NEC VR4100 series. # -obj-y += bcu.o cmu.o giu.o icu.o init.o int-handler.o pmu.o +obj-y += bcu.o cmu.o icu.o init.o int-handler.o pmu.o obj-$(CONFIG_VRC4173) += vrc4173.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/vr41xx/common/giu.c b/arch/mips/vr41xx/common/giu.c deleted file mode 100644 index 9c6b21a79e8f..000000000000 --- a/arch/mips/vr41xx/common/giu.c +++ /dev/null @@ -1,455 +0,0 @@ -/* - * giu.c, General-purpose I/O Unit Interrupt routines for NEC VR4100 series. - * - * Copyright (C) 2002 MontaVista Software Inc. - * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com> - * Copyright (C) 2003-2004 Yoichi Yuasa <yuasa@hh.iij4u.or.jp> - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* - * Changes: - * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com> - * - New creation, NEC VR4111, VR4121, VR4122 and VR4131 are supported. - * - * Yoichi Yuasa <yuasa@hh.iij4u.or.jp> - * - Added support for NEC VR4133. - * - Removed board_irq_init. - */ -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/smp.h> -#include <linux/types.h> - -#include <asm/cpu.h> -#include <asm/io.h> -#include <asm/vr41xx/vr41xx.h> - -#define GIUIOSELL_TYPE1 KSEG1ADDR(0x0b000100) -#define GIUIOSELL_TYPE2 KSEG1ADDR(0x0f000140) - -#define GIUIOSELL 0x00 -#define GIUIOSELH 0x02 -#define GIUINTSTATL 0x08 -#define GIUINTSTATH 0x0a -#define GIUINTENL 0x0c -#define GIUINTENH 0x0e -#define GIUINTTYPL 0x10 -#define GIUINTTYPH 0x12 -#define GIUINTALSELL 0x14 -#define GIUINTALSELH 0x16 -#define GIUINTHTSELL 0x18 -#define GIUINTHTSELH 0x1a -#define GIUFEDGEINHL 0x20 -#define GIUFEDGEINHH 0x22 -#define GIUREDGEINHL 0x24 -#define GIUREDGEINHH 0x26 - -static uint32_t giu_base; - -static struct irqaction giu_cascade = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; - -#define read_giuint(offset) readw(giu_base + (offset)) -#define write_giuint(val, offset) writew((val), giu_base + (offset)) - -#define GIUINT_HIGH_OFFSET 16 - -static inline uint16_t set_giuint(uint8_t offset, uint16_t set) -{ - uint16_t res; - - res = read_giuint(offset); - res |= set; - write_giuint(res, offset); - - return res; -} - -static inline uint16_t clear_giuint(uint8_t offset, uint16_t clear) -{ - uint16_t res; - - res = read_giuint(offset); - res &= ~clear; - write_giuint(res, offset); - - return res; -} - -static unsigned int startup_giuint_low_irq(unsigned int irq) -{ - unsigned int pin; - - pin = GIU_IRQ_TO_PIN(irq); - write_giuint((uint16_t)1 << pin, GIUINTSTATL); - set_giuint(GIUINTENL, (uint16_t)1 << pin); - - return 0; -} - -static void shutdown_giuint_low_irq(unsigned int irq) -{ - clear_giuint(GIUINTENL, (uint16_t)1 << GIU_IRQ_TO_PIN(irq)); -} - -static void enable_giuint_low_irq(unsigned int irq) -{ - set_giuint(GIUINTENL, (uint16_t)1 << GIU_IRQ_TO_PIN(irq)); -} - -#define disable_giuint_low_irq shutdown_giuint_low_irq - -static void ack_giuint_low_irq(unsigned int irq) -{ - unsigned int pin; - - pin = GIU_IRQ_TO_PIN(irq); - clear_giuint(GIUINTENL, (uint16_t)1 << pin); - write_giuint((uint16_t)1 << pin, GIUINTSTATL); -} - -static void end_giuint_low_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - set_giuint(GIUINTENL, (uint16_t)1 << GIU_IRQ_TO_PIN(irq)); -} - -static struct hw_interrupt_type giuint_low_irq_type = { - .typename = "GIUINTL", - .startup = startup_giuint_low_irq, - .shutdown = shutdown_giuint_low_irq, - .enable = enable_giuint_low_irq, - .disable = disable_giuint_low_irq, - .ack = ack_giuint_low_irq, - .end = end_giuint_low_irq, -}; - -static unsigned int startup_giuint_high_irq(unsigned int irq) -{ - unsigned int pin; - - pin = GIU_IRQ_TO_PIN(irq - GIUINT_HIGH_OFFSET); - write_giuint((uint16_t)1 << pin, GIUINTSTATH); - set_giuint(GIUINTENH, (uint16_t)1 << pin); - - return 0; -} - -static void shutdown_giuint_high_irq(unsigned int irq) -{ - clear_giuint(GIUINTENH, (uint16_t)1 << GIU_IRQ_TO_PIN(irq - GIUINT_HIGH_OFFSET)); -} - -static void enable_giuint_high_irq(unsigned int irq) -{ - set_giuint(GIUINTENH, (uint16_t)1 << GIU_IRQ_TO_PIN(irq - GIUINT_HIGH_OFFSET)); -} - -#define disable_giuint_high_irq shutdown_giuint_high_irq - -static void ack_giuint_high_irq(unsigned int irq) -{ - unsigned int pin; - - pin = GIU_IRQ_TO_PIN(irq - GIUINT_HIGH_OFFSET); - clear_giuint(GIUINTENH, (uint16_t)1 << pin); - write_giuint((uint16_t)1 << pin, GIUINTSTATH); -} - -static void end_giuint_high_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - set_giuint(GIUINTENH, (uint16_t)1 << GIU_IRQ_TO_PIN(irq - GIUINT_HIGH_OFFSET)); -} - -static struct hw_interrupt_type giuint_high_irq_type = { - .typename = "GIUINTH", - .startup = startup_giuint_high_irq, - .shutdown = shutdown_giuint_high_irq, - .enable = enable_giuint_high_irq, - .disable = disable_giuint_high_irq, - .ack = ack_giuint_high_irq, - .end = end_giuint_high_irq, -}; - -void __init init_vr41xx_giuint_irq(void) -{ - int i; - - for (i = GIU_IRQ_BASE; i <= GIU_IRQ_LAST; i++) { - if (i < (GIU_IRQ_BASE + GIUINT_HIGH_OFFSET)) - irq_desc[i].handler = &giuint_low_irq_type; - else - irq_desc[i].handler = &giuint_high_irq_type; - } - - setup_irq(GIUINT_CASCADE_IRQ, &giu_cascade); -} - -void vr41xx_set_irq_trigger(int pin, int trigger, int hold) -{ - uint16_t mask; - - if (pin < GIUINT_HIGH_OFFSET) { - mask = (uint16_t)1 << pin; - if (trigger != TRIGGER_LEVEL) { - set_giuint(GIUINTTYPL, mask); - if (hold == SIGNAL_HOLD) - set_giuint(GIUINTHTSELL, mask); - else - clear_giuint(GIUINTHTSELL, mask); - if (current_cpu_data.cputype == CPU_VR4133) { - switch (trigger) { - case TRIGGER_EDGE_FALLING: - set_giuint(GIUFEDGEINHL, mask); - clear_giuint(GIUREDGEINHL, mask); - break; - case TRIGGER_EDGE_RISING: - clear_giuint(GIUFEDGEINHL, mask); - set_giuint(GIUREDGEINHL, mask); - break; - default: - set_giuint(GIUFEDGEINHL, mask); - set_giuint(GIUREDGEINHL, mask); - break; - } - } - } else { - clear_giuint(GIUINTTYPL, mask); - clear_giuint(GIUINTHTSELL, mask); - } - write_giuint(mask, GIUINTSTATL); - } else { - mask = (uint16_t)1 << (pin - GIUINT_HIGH_OFFSET); - if (trigger != TRIGGER_LEVEL) { - set_giuint(GIUINTTYPH, mask); - if (hold == SIGNAL_HOLD) - set_giuint(GIUINTHTSELH, mask); - else - clear_giuint(GIUINTHTSELH, mask); - if (current_cpu_data.cputype == CPU_VR4133) { - switch (trigger) { - case TRIGGER_EDGE_FALLING: - set_giuint(GIUFEDGEINHH, mask); - clear_giuint(GIUREDGEINHH, mask); - break; - case TRIGGER_EDGE_RISING: - clear_giuint(GIUFEDGEINHH, mask); - set_giuint(GIUREDGEINHH, mask); - break; - default: - set_giuint(GIUFEDGEINHH, mask); - set_giuint(GIUREDGEINHH, mask); - break; - } - } - } else { - clear_giuint(GIUINTTYPH, mask); - clear_giuint(GIUINTHTSELH, mask); - } - write_giuint(mask, GIUINTSTATH); - } -} - -EXPORT_SYMBOL(vr41xx_set_irq_trigger); - -void vr41xx_set_irq_level(int pin, int level) -{ - uint16_t mask; - - if (pin < GIUINT_HIGH_OFFSET) { - mask = (uint16_t)1 << pin; - if (level == LEVEL_HIGH) - set_giuint(GIUINTALSELL, mask); - else - clear_giuint(GIUINTALSELL, mask); - write_giuint(mask, GIUINTSTATL); - } else { - mask = (uint16_t)1 << (pin - GIUINT_HIGH_OFFSET); - if (level == LEVEL_HIGH) - set_giuint(GIUINTALSELH, mask); - else - clear_giuint(GIUINTALSELH, mask); - write_giuint(mask, GIUINTSTATH); - } -} - -EXPORT_SYMBOL(vr41xx_set_irq_level); - -#define GIUINT_NR_IRQS 32 - -enum { - GIUINT_NO_CASCADE, - GIUINT_CASCADE -}; - -struct vr41xx_giuint_cascade { - unsigned int flag; - int (*get_irq_number)(int irq); -}; - -static struct vr41xx_giuint_cascade giuint_cascade[GIUINT_NR_IRQS]; - -static int no_irq_number(int irq) -{ - return -EINVAL; -} - -int vr41xx_cascade_irq(unsigned int irq, int (*get_irq_number)(int irq)) -{ - unsigned int pin; - int retval; - - if (irq < GIU_IRQ(0) || irq > GIU_IRQ(31)) - return -EINVAL; - - if(!get_irq_number) - return -EINVAL; - - pin = GIU_IRQ_TO_PIN(irq); - giuint_cascade[pin].flag = GIUINT_CASCADE; - giuint_cascade[pin].get_irq_number = get_irq_number; - - retval = setup_irq(irq, &giu_cascade); - if (retval != 0) { - giuint_cascade[pin].flag = GIUINT_NO_CASCADE; - giuint_cascade[pin].get_irq_number = no_irq_number; - } - - return retval; -} - -EXPORT_SYMBOL(vr41xx_cascade_irq); - -static inline int get_irq_pin_number(void) -{ - uint16_t pendl, pendh, maskl, maskh; - int i; - - pendl = read_giuint(GIUINTSTATL); - pendh = read_giuint(GIUINTSTATH); - maskl = read_giuint(GIUINTENL); - maskh = read_giuint(GIUINTENH); - - maskl &= pendl; - maskh &= pendh; - - if (maskl) { - for (i = 0; i < 16; i++) { - if (maskl & ((uint16_t)1 << i)) - return i; - } - } else if (maskh) { - for (i = 0; i < 16; i++) { - if (maskh & ((uint16_t)1 << i)) - return i + GIUINT_HIGH_OFFSET; - } - } - - printk(KERN_ERR "spurious GIU interrupt: %04x(%04x),%04x(%04x)\n", - maskl, pendl, maskh, pendh); - - atomic_inc(&irq_err_count); - - return -1; -} - -static inline void ack_giuint_irq(int pin) -{ - if (pin < GIUINT_HIGH_OFFSET) { - clear_giuint(GIUINTENL, (uint16_t)1 << pin); - write_giuint((uint16_t)1 << pin, GIUINTSTATL); - } else { - pin -= GIUINT_HIGH_OFFSET; - clear_giuint(GIUINTENH, (uint16_t)1 << pin); - write_giuint((uint16_t)1 << pin, GIUINTSTATH); - } -} - -static inline void end_giuint_irq(int pin) -{ - if (pin < GIUINT_HIGH_OFFSET) - set_giuint(GIUINTENL, (uint16_t)1 << pin); - else - set_giuint(GIUINTENH, (uint16_t)1 << (pin - GIUINT_HIGH_OFFSET)); -} - -void giuint_irq_dispatch(struct pt_regs *regs) -{ - struct vr41xx_giuint_cascade *cascade; - unsigned int giuint_irq; - int pin; - - pin = get_irq_pin_number(); - if (pin < 0) - return; - - disable_irq(GIUINT_CASCADE_IRQ); - - cascade = &giuint_cascade[pin]; - giuint_irq = GIU_IRQ(pin); - if (cascade->flag == GIUINT_CASCADE) { - int irq = cascade->get_irq_number(giuint_irq); - ack_giuint_irq(pin); - if (irq >= 0) - do_IRQ(irq, regs); - end_giuint_irq(pin); - } else { - do_IRQ(giuint_irq, regs); - } - - enable_irq(GIUINT_CASCADE_IRQ); -} - -static int __init vr41xx_giu_init(void) -{ - int i; - - switch (current_cpu_data.cputype) { - case CPU_VR4111: - case CPU_VR4121: - giu_base = GIUIOSELL_TYPE1; - break; - case CPU_VR4122: - case CPU_VR4131: - case CPU_VR4133: - giu_base = GIUIOSELL_TYPE2; - break; - default: - printk(KERN_ERR "GIU: Unexpected CPU of NEC VR4100 series\n"); - return -EINVAL; - } - - for (i = 0; i < GIUINT_NR_IRQS; i++) { - if (i < GIUINT_HIGH_OFFSET) - clear_giuint(GIUINTENL, (uint16_t)1 << i); - else - clear_giuint(GIUINTENH, (uint16_t)1 << (i - GIUINT_HIGH_OFFSET)); - giuint_cascade[i].flag = GIUINT_NO_CASCADE; - giuint_cascade[i].get_irq_number = no_irq_number; - } - - return 0; -} - -early_initcall(vr41xx_giu_init); diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index e7e7c56fc212..1c2d87435233 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -148,7 +148,7 @@ config HOTPLUG_CPU default y if SMP select HOTPLUG -config DISCONTIGMEM +config ARCH_DISCONTIGMEM_ENABLE bool "Discontiguous memory support (EXPERIMENTAL)" depends on EXPERIMENTAL help @@ -157,6 +157,8 @@ config DISCONTIGMEM or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa> for more. +source "mm/Kconfig" + config PREEMPT bool # bool "Preemptible Kernel" @@ -188,6 +190,8 @@ source "fs/Kconfig.binfmt" endmenu +source "net/Kconfig" + source "drivers/Kconfig" source "fs/Kconfig" diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig index 872085dea8a8..6efaa9293eef 100644 --- a/arch/parisc/configs/712_defconfig +++ b/arch/parisc/configs/712_defconfig @@ -506,7 +506,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_NR_UARTS=17 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig index d28ebfa1070d..30fc03ed0cfb 100644 --- a/arch/parisc/configs/a500_defconfig +++ b/arch/parisc/configs/a500_defconfig @@ -662,7 +662,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_NR_UARTS=17 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig index 1700d7aec686..46c9511f3229 100644 --- a/arch/parisc/configs/b180_defconfig +++ b/arch/parisc/configs/b180_defconfig @@ -514,7 +514,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_NR_UARTS=13 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index b27980161c31..67aca6ccc9b0 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -661,7 +661,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_NR_UARTS=13 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig index ebd6301aa599..fdae21c503d7 100644 --- a/arch/parisc/defconfig +++ b/arch/parisc/defconfig @@ -517,7 +517,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_NR_UARTS=13 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index 3cb08a4a513a..e6a891a0cad0 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -255,8 +255,26 @@ void __devinit pcibios_resource_to_bus(struct pci_dev *dev, pcibios_link_hba_resources(&hba->lmmio_space, bus->resource[1]); } +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + struct pci_bus *bus = dev->bus; + struct pci_hba_data *hba = HBA_DATA(bus->bridge->platform_data); + + if (res->flags & IORESOURCE_MEM) { + res->start = PCI_HOST_ADDR(hba, region->start); + res->end = PCI_HOST_ADDR(hba, region->end); + } + + if (res->flags & IORESOURCE_IO) { + res->start = region->start; + res->end = region->end; + } +} + #ifdef CONFIG_HOTPLUG EXPORT_SYMBOL(pcibios_resource_to_bus); +EXPORT_SYMBOL(pcibios_bus_to_resource); #endif /* diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 46e4a6881f11..4fc04501d5e5 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -150,8 +150,6 @@ void machine_restart(char *cmd) } -EXPORT_SYMBOL(machine_restart); - void machine_halt(void) { /* @@ -160,8 +158,6 @@ void machine_halt(void) */ } -EXPORT_SYMBOL(machine_halt); - /* * This routine is called from sys_reboot to actually turn off the @@ -187,8 +183,6 @@ void machine_power_off(void) KERN_EMERG "Please power this system off now."); } -EXPORT_SYMBOL(machine_power_off); - /* * Create a kernel thread diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index eaa701479f5f..0ad945d4c0a4 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -178,17 +178,17 @@ good_area: */ switch (handle_mm_fault(mm, vma, address, (acc_type & VM_WRITE) != 0)) { - case 1: + case VM_FAULT_MINOR: ++current->min_flt; break; - case 2: + case VM_FAULT_MAJOR: ++current->maj_flt; break; - case 0: + case VM_FAULT_SIGBUS: /* - * We ran out of memory, or some other thing happened - * to us that made us unable to handle the page fault - * gracefully. + * We hit a hared mapping outside of the file, or some + * other thing happened to us that made us unable to + * handle the page fault gracefully. */ goto bad_area; default: diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index cac37589e35c..2886ad70db48 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -506,7 +506,7 @@ void show_mem(void) for (j = node_start_pfn(i); j < node_end_pfn(i); j++) { struct page *p; - p = node_mem_map(i) + j - node_start_pfn(i); + p = nid_page_nr(i, j) - node_start_pfn(i); total++; if (PageReserved(p)) diff --git a/arch/ppc/8xx_io/Kconfig b/arch/ppc/8xx_io/Kconfig index 9e2227ec3b34..57dacf978532 100644 --- a/arch/ppc/8xx_io/Kconfig +++ b/arch/ppc/8xx_io/Kconfig @@ -69,9 +69,9 @@ config FEC_QS6612 config ENET_BIG_BUFFERS bool "Use Big CPM Ethernet Buffers" - depends on NET_ETHERNET + depends on SCC_ENET || FEC_ENET help - Allocate large buffers for MPC8xx Etherenet. Increases throughput + Allocate large buffers for MPC8xx Ethernet. Increases throughput and decreases the likelihood of dropped packets, but costs memory. config HTDMSOUND diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c index 0cc2e7a9cb11..11726e2a4ec8 100644 --- a/arch/ppc/8xx_io/commproc.c +++ b/arch/ppc/8xx_io/commproc.c @@ -39,8 +39,6 @@ #include <asm/tlbflush.h> #include <asm/rheap.h> -extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep); - static void m8xx_cpm_dpinit(void); static uint host_buffer; /* One page of host buffer */ static uint host_end; /* end + 1 */ @@ -108,14 +106,11 @@ struct hw_interrupt_type cpm_pic = { .end = cpm_eoi, }; -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); - void -m8xx_cpm_reset(uint bootpage) +m8xx_cpm_reset(void) { volatile immap_t *imp; volatile cpm8xx_t *commproc; - pte_t *pte; imp = (immap_t *)IMAP_ADDR; commproc = (cpm8xx_t *)&imp->im_cpm; @@ -143,17 +138,6 @@ m8xx_cpm_reset(uint bootpage) /* Reclaim the DP memory for our use. */ m8xx_cpm_dpinit(); - /* get the PTE for the bootpage */ - if (!get_pteptr(&init_mm, bootpage, &pte)) - panic("get_pteptr failed\n"); - - /* and make it uncachable */ - pte_val(*pte) |= _PAGE_NO_CACHE; - _tlbie(bootpage); - - host_buffer = bootpage; - host_end = host_buffer + PAGE_SIZE; - /* Tell everyone where the comm processor resides. */ cpmp = (cpm8xx_t *)commproc; @@ -384,8 +368,6 @@ static rh_info_t cpm_dpmem_info; void m8xx_cpm_dpinit(void) { - cpm8xx_t *cp = &((immap_t *)IMAP_ADDR)->im_cpm; - spin_lock_init(&cpm_dpmem_lock); /* Initialize the info header */ diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c index 4ea7158e5062..ece6a9fbe09b 100644 --- a/arch/ppc/8xx_io/enet.c +++ b/arch/ppc/8xx_io/enet.c @@ -714,16 +714,24 @@ static int __init scc_enet_init(void) immap->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */ #endif /* PC_ENET_LBK */ - /* Configure port C pins to enable CLSN and RENA. +#ifdef PE_ENET_TCLK + /* Configure port E for TCLK and RCLK. */ - immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA); - immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA); - immap->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA); - + cp->cp_pepar |= (PE_ENET_TCLK | PE_ENET_RCLK); + cp->cp_pedir &= ~(PE_ENET_TCLK | PE_ENET_RCLK); + cp->cp_peso &= ~(PE_ENET_TCLK | PE_ENET_RCLK); +#else /* Configure port A for TCLK and RCLK. */ immap->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK); immap->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK); +#endif + + /* Configure port C pins to enable CLSN and RENA. + */ + immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA); + immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA); + immap->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA); /* Configure Serial Interface clock routing. * First, clear all SCC bits to zero, then set the ones we want. @@ -896,14 +904,18 @@ static int __init scc_enet_init(void) /* It is now OK to enable the Ethernet transmitter. * Unfortunately, there are board implementation differences here. */ -#if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA)) +#if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA) && !defined (PE_ENET_TENA)) immap->im_ioport.iop_pcpar |= PC_ENET_TENA; immap->im_ioport.iop_pcdir &= ~PC_ENET_TENA; -#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA)) +#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && !defined (PE_ENET_TENA)) cp->cp_pbpar |= PB_ENET_TENA; cp->cp_pbdir |= PB_ENET_TENA; +#elif ( !defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && defined (PE_ENET_TENA)) + cp->cp_pepar |= PE_ENET_TENA; + cp->cp_pedir &= ~PE_ENET_TENA; + cp->cp_peso |= PE_ENET_TENA; #else -#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA +#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA, PE_ENET_TENA #endif #if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) @@ -936,6 +948,29 @@ static int __init scc_enet_init(void) *((volatile uint *)BCSR1) &= ~BCSR1_ETHEN; #endif +#ifdef CONFIG_MPC885ADS + + /* Deassert PHY reset and enable the PHY. + */ + { + volatile uint __iomem *bcsr = ioremap(BCSR_ADDR, BCSR_SIZE); + uint tmp; + + tmp = in_be32(bcsr + 1 /* BCSR1 */); + tmp |= BCSR1_ETHEN; + out_be32(bcsr + 1, tmp); + tmp = in_be32(bcsr + 4 /* BCSR4 */); + tmp |= BCSR4_ETH10_RST; + out_be32(bcsr + 4, tmp); + iounmap(bcsr); + } + + /* On MPC885ADS SCC ethernet PHY defaults to the full duplex mode + * upon reset. SCC is set to half duplex by default. So this + * inconsistency should be better fixed by the software. + */ +#endif + dev->base_addr = (unsigned long)ep; #if 0 dev->name = "CPM_ENET"; @@ -969,3 +1004,4 @@ static int __init scc_enet_init(void) } module_init(scc_enet_init); + diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c index 0730392dcc20..62f68d6181c6 100644 --- a/arch/ppc/8xx_io/fec.c +++ b/arch/ppc/8xx_io/fec.c @@ -173,7 +173,7 @@ struct fec_enet_private { uint phy_status; uint phy_speed; phy_info_t *phy; - struct tq_struct phy_task; + struct work_struct phy_task; uint sequence_done; @@ -199,7 +199,8 @@ static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev); #ifdef CONFIG_USE_MDIO static void fec_enet_mii(struct net_device *dev); #endif /* CONFIG_USE_MDIO */ -static void fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs); +static irqreturn_t fec_enet_interrupt(int irq, void * dev_id, + struct pt_regs * regs); #ifdef CONFIG_FEC_PACKETHOOK static void fec_enet_tx(struct net_device *dev, __u32 regval); static void fec_enet_rx(struct net_device *dev, __u32 regval); @@ -471,7 +472,7 @@ fec_timeout(struct net_device *dev) /* The interrupt handler. * This is called from the MPC core interrupt. */ -static void +static irqreturn_t fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs) { struct net_device *dev = dev_id; @@ -525,6 +526,7 @@ printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__,__LINE__,__FUNCTIO } } + return IRQ_RETVAL(IRQ_HANDLED); } @@ -1263,8 +1265,9 @@ static void mii_display_status(struct net_device *dev) printk(".\n"); } -static void mii_display_config(struct net_device *dev) +static void mii_display_config(void *priv) { + struct net_device *dev = (struct net_device *)priv; struct fec_enet_private *fep = dev->priv; volatile uint *s = &(fep->phy_status); @@ -1294,8 +1297,9 @@ static void mii_display_config(struct net_device *dev) fep->sequence_done = 1; } -static void mii_relink(struct net_device *dev) +static void mii_relink(void *priv) { + struct net_device *dev = (struct net_device *)priv; struct fec_enet_private *fep = dev->priv; int duplex; @@ -1323,18 +1327,16 @@ static void mii_queue_relink(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = dev->priv; - fep->phy_task.routine = (void *)mii_relink; - fep->phy_task.data = dev; - schedule_task(&fep->phy_task); + INIT_WORK(&fep->phy_task, mii_relink, (void *)dev); + schedule_work(&fep->phy_task); } static void mii_queue_config(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = dev->priv; - fep->phy_task.routine = (void *)mii_display_config; - fep->phy_task.data = dev; - schedule_task(&fep->phy_task); + INIT_WORK(&fep->phy_task, mii_display_config, (void *)dev); + schedule_work(&fep->phy_task); } @@ -1403,11 +1405,11 @@ mii_discover_phy(uint mii_reg, struct net_device *dev) /* This interrupt occurs when the PHY detects a link change. */ -static void +static #ifdef CONFIG_RPXCLASSIC -mii_link_interrupt(void *dev_id) +void mii_link_interrupt(void *dev_id) #else -mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs) +irqreturn_t mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs) #endif { #ifdef CONFIG_USE_MDIO @@ -1440,6 +1442,9 @@ mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs) printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__,__LINE__,__FUNCTION__); #endif /* CONFIG_USE_MDIO */ +#ifndef CONFIG_RPXCLASSIC + return IRQ_RETVAL(IRQ_HANDLED); +#endif /* CONFIG_RPXCLASSIC */ } static int @@ -1575,7 +1580,7 @@ static int __init fec_enet_init(void) struct fec_enet_private *fep; int i, j, k, err; unsigned char *eap, *iap, *ba; - unsigned long mem_addr; + dma_addr_t mem_addr; volatile cbd_t *bdp; cbd_t *cbd_base; volatile immap_t *immap; @@ -1640,7 +1645,8 @@ static int __init fec_enet_init(void) printk("FEC initialization failed.\n"); return 1; } - cbd_base = (cbd_t *)consistent_alloc(GFP_KERNEL, PAGE_SIZE, &mem_addr); + cbd_base = (cbd_t *)dma_alloc_coherent(dev->class_dev.dev, PAGE_SIZE, + &mem_addr, GFP_KERNEL); /* Set receive and transmit descriptor base. */ @@ -1657,7 +1663,10 @@ static int __init fec_enet_init(void) /* Allocate a page. */ - ba = (unsigned char *)consistent_alloc(GFP_KERNEL, PAGE_SIZE, &mem_addr); + ba = (unsigned char *)dma_alloc_coherent(dev->class_dev.dev, + PAGE_SIZE, + &mem_addr, + GFP_KERNEL); /* BUG: no check for failure */ /* Initialize the BD for every fragment in the page. diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 10162b187bcf..f6db3b385fea 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -85,9 +85,11 @@ config POWER4 bool "POWER4 and 970 (G5)" config 8xx - depends on BROKEN bool "8xx" +config E200 + bool "e200" + config E500 bool "e500" @@ -98,12 +100,12 @@ config PPC_FPU config BOOKE bool - depends on E500 + depends on E200 || E500 default y config FSL_BOOKE bool - depends on E500 + depends on E200 || E500 default y config PTE_64BIT @@ -141,16 +143,16 @@ config ALTIVEC config SPE bool "SPE Support" - depends on E500 + depends on E200 || E500 ---help--- This option enables kernel support for the Signal Processing Extensions (SPE) to the PowerPC processor. The kernel currently supports saving and restoring SPE registers, and turning on the 'spe enable' bit so user processes can execute SPE instructions. - This option is only usefully if you have a processor that supports + This option is only useful if you have a processor that supports SPE (e500, otherwise known as 85xx series), but does not have any - affect on a non-spe cpu (it does, however add code to the kernel). + effect on a non-spe cpu (it does, however add code to the kernel). If in doubt, say Y here. @@ -200,7 +202,7 @@ config TAU_AVERAGE config MATH_EMULATION bool "Math emulation" - depends on 4xx || 8xx || E500 + depends on 4xx || 8xx || E200 || E500 ---help--- Some PowerPC chips designed for embedded applications do not have a floating-point unit and therefore do not implement the @@ -214,6 +216,26 @@ config MATH_EMULATION here. Saying Y here will not hurt performance (on any machine) but will increase the size of the kernel. +config KEXEC + bool "kexec system call (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is indepedent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similiarity to the exec system call. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. It may help to enable device hotplugging + support. As of this writing the exact hardware interface is + strongly in flux, so no good recommendation can be made. + + In the GameCube implementation, kexec allows you to load and + run DOL files, including kernel and homebrew DOLs. + source "drivers/cpufreq/Kconfig" config CPU_FREQ_PMAC @@ -254,13 +276,16 @@ config PPC_STD_MMU config NOT_COHERENT_CACHE bool - depends on 4xx || 8xx + depends on 4xx || 8xx || E200 default y endmenu menu "Platform options" +config FADS + bool + choice prompt "8xx Machine Type" depends on 8xx @@ -376,8 +401,25 @@ config BSEIP 26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video controller, and two RS232 ports. -config FADS +config MPC8XXFADS bool "FADS" + select FADS + +config MPC86XADS + bool "MPC86XADS" + help + MPC86x Application Development System by Freescale Semiconductor. + The MPC86xADS is meant to serve as a platform for s/w and h/w + development around the MPC86X processor families. + select FADS + +config MPC885ADS + bool "MPC885ADS" + help + Freescale Semiconductor MPC885 Application Development System (ADS). + Also known as DUET. + The MPC885ADS is meant to serve as a platform for s/w and h/w + development around the MPC885 processor family. config TQM823L bool "TQM823L" @@ -516,6 +558,7 @@ config PPC_MULTIPLATFORM config APUS bool "Amiga-APUS" + depends on BROKEN help Select APUS if configuring for a PowerUP Amiga. More information is available at: @@ -605,6 +648,7 @@ config PAL4 config GEMINI bool "Synergy-Gemini" + depends on BROKEN help Select Gemini if configuring for a Synergy Microsystems' Gemini series Single Board Computer. More information is available at: @@ -835,6 +879,13 @@ config MPC10X_STORE_GATHERING bool "Enable MPC10x store gathering" depends on MPC10X_BRIDGE +config SANDPOINT_ENABLE_UART1 + bool "Enable DUART mode on Sandpoint" + depends on SANDPOINT + help + If this option is enabled then the MPC824x processor will run + in DUART mode instead of UART mode. + config CPC710_DATA_GATHERING bool "Enable CPC710 data gathering" depends on K2 @@ -892,19 +943,13 @@ config NR_CPUS depends on SMP default "4" -config PREEMPT - bool "Preemptible Kernel" - help - This option reduces the latency of the kernel when reacting to - real-time or interactive events by allowing a low priority process to - be preempted even if it is in kernel mode executing a system call. - - Say Y here if you are building a kernel for a desktop, embedded - or real-time system. Say N if you are unsure. - config HIGHMEM bool "High memory support" +source kernel/Kconfig.hz +source kernel/Kconfig.preempt +source "mm/Kconfig" + source "fs/Kconfig.binfmt" config PROC_DEVICETREE @@ -1310,6 +1355,8 @@ config PIN_TLB depends on ADVANCED_OPTIONS && 8xx endmenu +source "net/Kconfig" + source "drivers/Kconfig" source "fs/Kconfig" diff --git a/arch/ppc/Kconfig.debug b/arch/ppc/Kconfig.debug index d2e1eea8e8e4..e16c7710d4be 100644 --- a/arch/ppc/Kconfig.debug +++ b/arch/ppc/Kconfig.debug @@ -66,7 +66,7 @@ config SERIAL_TEXT_DEBUG config PPC_OCP bool - depends on IBM_OCP || FSL_OCP || XILINX_OCP + depends on IBM_OCP || XILINX_OCP default y endmenu diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index 0432a25b4735..f9b0d778dd82 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -29,7 +29,7 @@ CPP = $(CC) -E $(CFLAGS) CHECKFLAGS += -D__powerpc__ -ifndef CONFIG_E500 +ifndef CONFIG_FSL_BOOKE CFLAGS += -mstring endif @@ -38,6 +38,7 @@ cpu-as-$(CONFIG_4xx) += -Wa,-m405 cpu-as-$(CONFIG_6xx) += -Wa,-maltivec cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec cpu-as-$(CONFIG_E500) += -Wa,-me500 +cpu-as-$(CONFIG_E200) += -Wa,-me200 AFLAGS += $(cpu-as-y) CFLAGS += $(cpu-as-y) diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile index c9ac5f5fa9e4..532e7ef1edb6 100644 --- a/arch/ppc/boot/images/Makefile +++ b/arch/ppc/boot/images/Makefile @@ -6,12 +6,17 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh extra-y := vmlinux.bin vmlinux.gz +# two make processes may write to vmlinux.gz at the same time with make -j +quiet_cmd_mygzip = GZIP $@ +cmd_mygzip = gzip -f -9 < $< > $@.$$$$ && mv $@.$$$$ $@ + + OBJCOPYFLAGS_vmlinux.bin := -O binary $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) $(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE - $(call if_changed,gzip) + $(call if_changed,mygzip) quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \ diff --git a/arch/ppc/boot/openfirmware/chrpmain.c b/arch/ppc/boot/openfirmware/chrpmain.c index 6fb4f738728c..effe4a0624b0 100644 --- a/arch/ppc/boot/openfirmware/chrpmain.c +++ b/arch/ppc/boot/openfirmware/chrpmain.c @@ -39,7 +39,7 @@ char *avail_high; #define SCRATCH_SIZE (128 << 10) -static char scratch[SCRATCH_SIZE]; /* 1MB of scratch space for gunzip */ +static char scratch[SCRATCH_SIZE]; /* 128k of scratch space for gunzip */ typedef void (*kernel_start_t)(int, int, void *, unsigned int, unsigned int); diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index 991b4cbb83c8..d4dc4fa79647 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -61,6 +61,12 @@ zimageinitrd-$(CONFIG_IBM_OPENBIOS) := zImage.initrd-TREE end-$(CONFIG_EMBEDDEDBOOT) := embedded misc-$(CONFIG_EMBEDDEDBOOT) := misc-embedded.o + zimage-$(CONFIG_BAMBOO) := zImage-TREE +zimageinitrd-$(CONFIG_BAMBOO) := zImage.initrd-TREE + end-$(CONFIG_BAMBOO) := bamboo + entrypoint-$(CONFIG_BAMBOO) := 0x01000000 + extra.o-$(CONFIG_BAMBOO) := pibs.o + zimage-$(CONFIG_EBONY) := zImage-TREE zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE end-$(CONFIG_EBONY) := ebony diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c index ab0f9902cb67..e02de5b467a4 100644 --- a/arch/ppc/boot/simple/misc.c +++ b/arch/ppc/boot/simple/misc.c @@ -222,7 +222,7 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) puts("\n"); puts("Uncompressing Linux..."); - gunzip(0x0, 0x400000, zimage_start, &zimage_size); + gunzip(NULL, 0x400000, zimage_start, &zimage_size); puts("done.\n"); /* get the bi_rec address */ diff --git a/arch/ppc/boot/simple/mpc10x_memory.c b/arch/ppc/boot/simple/mpc10x_memory.c index 977daedc14c0..20d92a34ceb8 100644 --- a/arch/ppc/boot/simple/mpc10x_memory.c +++ b/arch/ppc/boot/simple/mpc10x_memory.c @@ -33,7 +33,7 @@ #define MPC10X_PCI_OP(rw, size, type, op, mask) \ static void \ -mpc10x_##rw##_config_##size(unsigned int *cfg_addr, \ +mpc10x_##rw##_config_##size(unsigned int __iomem *cfg_addr, \ unsigned int *cfg_data, int devfn, int offset, \ type val) \ { \ diff --git a/arch/ppc/boot/simple/pibs.c b/arch/ppc/boot/simple/pibs.c index 1348740e503f..67222d57c345 100644 --- a/arch/ppc/boot/simple/pibs.c +++ b/arch/ppc/boot/simple/pibs.c @@ -91,9 +91,11 @@ load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, mac64 = simple_strtoull((char *)PIBS_MAC_BASE, 0, 16); memcpy(hold_residual->bi_enetaddr, (char *)&mac64+2, 6); -#ifdef CONFIG_440GX +#if defined(CONFIG_440GX) || defined(CONFIG_440EP) mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET), 0, 16); memcpy(hold_residual->bi_enet1addr, (char *)&mac64+2, 6); +#endif +#ifdef CONFIG_440GX mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*2), 0, 16); memcpy(hold_residual->bi_enet2addr, (char *)&mac64+2, 6); mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*3), 0, 16); diff --git a/arch/ppc/configs/bamboo_defconfig b/arch/ppc/configs/bamboo_defconfig new file mode 100644 index 000000000000..0ba4e70d50b6 --- /dev/null +++ b/arch/ppc/configs/bamboo_defconfig @@ -0,0 +1,943 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12 +# Tue Jun 28 15:24:25 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +CONFIG_PPC_FPU=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_MATH_EMULATION is not set +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +CONFIG_4xx=y + +# +# IBM 4xx options +# +CONFIG_BAMBOO=y +# CONFIG_EBONY is not set +# CONFIG_LUAN is not set +# CONFIG_OCOTEA is not set +CONFIG_440EP=y +CONFIG_440=y +CONFIG_IBM440EP_ERR42=y +CONFIG_IBM_OCP=y +# CONFIG_PPC4xx_DMA is not set +CONFIG_PPC_GEN550=y +# CONFIG_PM is not set +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +# CONFIG_PC_KEYBOARD is not set +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="ip=on" +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_LEGACY_PROC is not set +# CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x01000000 + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +CONFIG_BLK_DEV_CMD64X=y +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_CONNTRACK is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_EMAC=y +# CONFIG_IBM_EMAC_ERRMSG is not set +CONFIG_IBM_EMAC_RXB=64 +CONFIG_IBM_EMAC_TXB=8 +CONFIG_IBM_EMAC_FGAP=8 +CONFIG_IBM_EMAC_SKBRES=0 +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +CONFIG_EEPRO100=y +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +CONFIG_NATSEMI=y +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=y +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVPTS_FS_XATTR is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_KGDB is not set +# CONFIG_XMON is not set +CONFIG_BDI_SWITCH=y +# CONFIG_SERIAL_TEXT_DEBUG is not set +CONFIG_PPC_OCP=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/common_defconfig b/arch/ppc/configs/common_defconfig index 95ead3f1b1cf..4d33bee23a89 100644 --- a/arch/ppc/configs/common_defconfig +++ b/arch/ppc/configs/common_defconfig @@ -1,15 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-rc2 -# Thu Nov 18 08:22:35 2004 +# Linux kernel version: 2.6.13-rc3 +# Wed Jul 13 13:34:24 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options @@ -17,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -28,30 +31,33 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set @@ -66,22 +72,27 @@ CONFIG_6xx=y # CONFIG_POWER3 is not set # CONFIG_POWER4 is not set # CONFIG_8xx is not set +# CONFIG_E200 is not set # CONFIG_E500 is not set +CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_TAU=y # CONFIG_TAU_INT is not set # CONFIG_TAU_AVERAGE is not set +# CONFIG_KEXEC is not set CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set -CONFIG_CPU_FREQ_PROC_INTF=y +CONFIG_CPU_FREQ_STAT=m +CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=m +CONFIG_CPU_FREQ_GOV_ONDEMAND=m +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_CPU_FREQ_PMAC=y -CONFIG_CPU_FREQ_TABLE=y CONFIG_PPC601_SYNC_FIX=y CONFIG_PM=y CONFIG_PPC_STD_MMU=y @@ -91,11 +102,15 @@ CONFIG_PPC_STD_MMU=y # CONFIG_PPC_MULTIPLATFORM=y # CONFIG_APUS is not set +# CONFIG_KATANA is not set # CONFIG_WILLOW is not set +# CONFIG_CPCI690 is not set # CONFIG_PCORE is not set # CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set +# CONFIG_CHESTNUT is not set # CONFIG_SPRUCE is not set +# CONFIG_HDPU is not set +# CONFIG_EV64260 is not set # CONFIG_LOPEC is not set # CONFIG_MCPN765 is not set # CONFIG_MVME5100 is not set @@ -103,6 +118,7 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PRPMC750 is not set # CONFIG_PRPMC800 is not set # CONFIG_SANDPOINT is not set +# CONFIG_RADSTONE_PPC7D is not set # CONFIG_ADIR is not set # CONFIG_K2 is not set # CONFIG_PAL4 is not set @@ -113,22 +129,40 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_RPX8260 is not set # CONFIG_TQM8260 is not set # CONFIG_ADS8272 is not set +# CONFIG_PQ2FADS is not set # CONFIG_LITE5200 is not set +# CONFIG_MPC834x_SYS is not set CONFIG_PPC_CHRP=y CONFIG_PPC_PMAC=y CONFIG_PPC_PREP=y CONFIG_PPC_OF=y CONFIG_PPCBUG_NVRAM=y # CONFIG_SMP is not set -# CONFIG_PREEMPT is not set # CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_PROC_DEVICETREE=y CONFIG_PREP_RESIDUAL=y CONFIG_PROC_PREPRESIDUAL=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyS0,9600 console=tty0 root=/dev/sda2" +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM_DEBUG is not set +CONFIG_SOFTWARE_SUSPEND=y +CONFIG_PM_STD_PARTITION="" +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y # # Bus options @@ -137,18 +171,24 @@ CONFIG_ISA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_LEGACY_PROC is not set +# CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +# CONFIG_PCMCIA is not set +CONFIG_CARDBUS=y # # PC-card bridges # +CONFIG_YENTA=m CONFIG_PCMCIA_PROBE=y +CONFIG_PCCARD_NONSTATIC=m # # Advanced setup @@ -165,6 +205,143 @@ CONFIG_TASK_SIZE=0x80000000 CONFIG_BOOT_LOAD=0x00800000 # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +CONFIG_IP_NF_CONNTRACK_MARK=y +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +# CONFIG_IP_NF_ARPFILTER is not set +# CONFIG_IP_NF_ARP_MANGLE is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -173,7 +350,8 @@ CONFIG_BOOT_LOAD=0x00800000 # # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set # # Memory Technology Devices (MTD) @@ -183,7 +361,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Parallel port support # -# CONFIG_PARPORT is not set +CONFIG_PARPORT=m +CONFIG_PARPORT_PC=m +CONFIG_PARPORT_SERIAL=m +CONFIG_PARPORT_PC_FIFO=y +CONFIG_PARPORT_PC_SUPERIO=y +# CONFIG_PARPORT_GSC is not set +CONFIG_PARPORT_1284=y # # Plug and Play support @@ -194,18 +378,21 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Block devices # CONFIG_BLK_DEV_FD=m -# CONFIG_MAC_FLOPPY is not set +CONFIG_MAC_FLOPPY=m # CONFIG_BLK_DEV_XD is not set +# CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" @@ -219,6 +406,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -247,7 +435,7 @@ CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_SL82C105=y +# CONFIG_BLK_DEV_SL82C105 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y @@ -264,6 +452,7 @@ CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set CONFIG_BLK_DEV_PDC202XX_NEW=y @@ -299,19 +488,21 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_LOGGING=y # # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers @@ -340,7 +531,6 @@ CONFIG_SCSI_AIC7XXX_OLD=m # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -348,6 +538,8 @@ CONFIG_SCSI_AIC7XXX_OLD=m # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 @@ -358,17 +550,15 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLOGIC_1280_1040 is not set CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -395,11 +585,40 @@ CONFIG_SCSI_MAC53C94=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set +CONFIG_IEEE1394=m + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +CONFIG_IEEE1394_OUI_DB=y +CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y +CONFIG_IEEE1394_CONFIG_ROM_IP1394=y +# CONFIG_IEEE1394_EXPORT_FULL_API is not set + +# +# Device Drivers +# +# CONFIG_IEEE1394_PCILYNX is not set +CONFIG_IEEE1394_OHCI1394=m + +# +# Protocol Drivers +# +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_IEEE1394_RAWIO=m +CONFIG_IEEE1394_CMP=m +CONFIG_IEEE1394_AMDTP=m # # I2O device support @@ -412,8 +631,8 @@ CONFIG_SCSI_MAC53C94=y CONFIG_ADB=y CONFIG_ADB_CUDA=y CONFIG_ADB_PMU=y -CONFIG_PMAC_PBOOK=y CONFIG_PMAC_APM_EMU=y +CONFIG_PMAC_MEDIABAY=y CONFIG_PMAC_BACKLIGHT=y CONFIG_ADB_MACIO=y CONFIG_INPUT_ADBHID=y @@ -423,138 +642,13 @@ CONFIG_THERM_ADT746X=m # CONFIG_ANSLCD is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration +# Network device support # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -# CONFIG_IP_NF_MATCH_HASHLIMIT is not set -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -# CONFIG_IP_NF_TARGET_LOG is not set -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -# CONFIG_IP_NF_MANGLE is not set -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -# CONFIG_IP_NF_ARPTABLES is not set -CONFIG_IP_NF_COMPAT_IPCHAINS=m -# CONFIG_IP_NF_COMPAT_IPFWADM is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set +CONFIG_TUN=m # # ARCnet devices @@ -588,6 +682,8 @@ CONFIG_TULIP_MMIO=y CONFIG_DE4X5=m # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_PCMCIA_XIRCOM is not set +# CONFIG_PCMCIA_XIRTULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -626,9 +722,12 @@ CONFIG_PCNET32=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -676,18 +775,19 @@ CONFIG_NET_WIRELESS=y # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set +# CONFIG_PLIP is not set CONFIG_PPP=y CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=y # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=y -# CONFIG_PPP_BSDCOMP is not set -# CONFIG_PPPOE is not set +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set +CONFIG_NETCONSOLE=m # # ISDN subsystem @@ -708,7 +808,7 @@ CONFIG_INPUT=y # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set @@ -717,18 +817,6 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVBUG=m # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -751,6 +839,18 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_UINPUT=m # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -761,7 +861,8 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -769,11 +870,16 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # Non-8250 serial port support # CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_PMACZILOG=y -# CONFIG_SERIAL_PMACZILOG_CONSOLE is not set +CONFIG_SERIAL_PMACZILOG_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_PRINTER is not set +# CONFIG_PPDEV is not set +# CONFIG_TIPAR is not set # # IPMI @@ -794,11 +900,23 @@ CONFIG_GEN_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set -# CONFIG_DRM is not set +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m +CONFIG_DRM=m +# CONFIG_DRM_TDFX is not set +CONFIG_DRM_R128=m +CONFIG_DRM_RADEON=m +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # CONFIG_I2C=y @@ -823,11 +941,13 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_HYDRA=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=m +# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -839,43 +959,20 @@ CONFIG_I2C_KEYWEST=m # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_SENSOR is not set # -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support +# Miscellaneous I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -887,6 +984,11 @@ CONFIG_I2C_KEYWEST=m # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set + +# # Misc devices # @@ -904,8 +1006,13 @@ CONFIG_I2C_KEYWEST=m # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -917,13 +1024,16 @@ CONFIG_FB_CT65550=y # CONFIG_FB_ASILIANT is not set CONFIG_FB_IMSTT=y # CONFIG_FB_VGA16 is not set -# CONFIG_FB_RIVA is not set +# CONFIG_FB_NVIDIA is not set +CONFIG_FB_RIVA=y +CONFIG_FB_RIVA_I2C=y +# CONFIG_FB_RIVA_DEBUG is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y -# CONFIG_FB_MATROX_G450 is not set -# CONFIG_FB_MATROX_G100A is not set +CONFIG_FB_MATROX_G=y CONFIG_FB_MATROX_I2C=y +CONFIG_FB_MATROX_MAVEN=m # CONFIG_FB_MATROX_MULTIHEAD is not set # CONFIG_FB_RADEON_OLD is not set CONFIG_FB_RADEON=y @@ -932,8 +1042,8 @@ CONFIG_FB_RADEON_I2C=y CONFIG_FB_ATY128=y CONFIG_FB_ATY=y CONFIG_FB_ATY_CT=y -# CONFIG_FB_ATY_GENERIC_LCD is not set -# CONFIG_FB_ATY_XL_INIT is not set +CONFIG_FB_ATY_GENERIC_LCD=y +CONFIG_FB_ATY_XL_INIT=y CONFIG_FB_ATY_GX=y # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set @@ -943,6 +1053,7 @@ CONFIG_FB_3DFX=y # CONFIG_FB_3DFX_ACCEL is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -960,9 +1071,10 @@ CONFIG_FONT_8x16=y # Logo configuration # CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -987,6 +1099,7 @@ CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_PM=y # # Generic devices @@ -1002,6 +1115,7 @@ CONFIG_SND_OPL3_LIB=m # # ISA devices # +CONFIG_SND_CS4231_LIB=m # CONFIG_SND_AD1848 is not set # CONFIG_SND_CS4231 is not set CONFIG_SND_CS4232=m @@ -1039,6 +1153,8 @@ CONFIG_SND_CS4232=m # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1046,6 +1162,7 @@ CONFIG_SND_CS4232=m # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set @@ -1062,7 +1179,9 @@ CONFIG_SND_CS4232=m # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set # # ALSA PowerMac devices @@ -1083,6 +1202,8 @@ CONFIG_SND_USB_AUDIO=m # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1094,15 +1215,19 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers # -# CONFIG_USB_EHCI_HCD is not set +CONFIG_USB_EHCI_HCD=m +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=m +# CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers @@ -1112,17 +1237,20 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_MIDI is not set CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set -# CONFIG_USB_STORAGE_DATAFAB is not set +CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y -# CONFIG_USB_STORAGE_ISD200 is not set +CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set +CONFIG_USB_STORAGE_USBAT=y +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y # # USB Input Devices @@ -1130,22 +1258,24 @@ CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set +CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices @@ -1161,22 +1291,27 @@ CONFIG_USB_HIDINPUT=y # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set +CONFIG_USB_PEGASUS=m # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_MON is not set # # USB port drivers # +# CONFIG_USB_USS720 is not set # # USB Serial Converter support # CONFIG_USB_SERIAL=m # CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set @@ -1185,28 +1320,32 @@ CONFIG_USB_SERIAL_VISOR=m # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +CONFIG_USB_SERIAL_KEYSPAN_MPR=y CONFIG_USB_SERIAL_KEYSPAN_USA28=y CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y CONFIG_USB_SERIAL_KEYSPAN_USA19=y CONFIG_USB_SERIAL_KEYSPAN_USA18X=y CONFIG_USB_SERIAL_KEYSPAN_USA19W=y CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set CONFIG_USB_EZUSB=y @@ -1215,7 +1354,6 @@ CONFIG_USB_EZUSB=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set @@ -1224,10 +1362,13 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -1236,21 +1377,63 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_GADGET is not set # +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_RT is not set +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_SECURITY=y +CONFIG_XFS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set +CONFIG_AUTOFS4_FS=m # # CD-ROM/DVD Filesystems @@ -1258,7 +1441,8 @@ CONFIG_DNOTIFY=y CONFIG_ISO9660_FS=y # CONFIG_JOLIET is not set # CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems @@ -1276,12 +1460,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_DEVPTS_FS_XATTR=y +CONFIG_DEVPTS_FS_SECURITY=y CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +CONFIG_TMPFS_XATTR=y +CONFIG_TMPFS_SECURITY=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -1295,27 +1478,33 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set +CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set # # Network File Systems # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -1348,46 +1537,46 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -CONFIG_NLS=y +CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m # # Library routines @@ -1406,7 +1595,19 @@ CONFIG_ZLIB_DEFLATE=y # # Kernel hacking # -# CONFIG_DEBUG_KERNEL is not set +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_XMON is not set +# CONFIG_BDI_SWITCH is not set CONFIG_BOOTX_TEXT=y # @@ -1419,3 +1620,7 @@ CONFIG_BOOTX_TEXT=y # Cryptographic options # # CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/mpc86x_ads_defconfig b/arch/ppc/configs/mpc86x_ads_defconfig new file mode 100644 index 000000000000..f63c6f59d68a --- /dev/null +++ b/arch/ppc/configs/mpc86x_ads_defconfig @@ -0,0 +1,633 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-rc4 +# Tue Jun 14 13:36:35 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +# CONFIG_SHMEM is not set +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +CONFIG_8xx=y +# CONFIG_E500 is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_CPU_FREQ is not set +CONFIG_EMBEDDEDBOOT=y +# CONFIG_PM is not set +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +CONFIG_FADS=y +# CONFIG_RPXLITE is not set +# CONFIG_RPXCLASSIC is not set +# CONFIG_BSEIP is not set +# CONFIG_MPC8XXFADS is not set +CONFIG_MPC86XADS=y +# CONFIG_TQM823L is not set +# CONFIG_TQM850L is not set +# CONFIG_TQM855L is not set +# CONFIG_TQM860L is not set +# CONFIG_FPS850L is not set +# CONFIG_SPD823TS is not set +# CONFIG_IVMS8 is not set +# CONFIG_IVML24 is not set +# CONFIG_SM850 is not set +# CONFIG_HERMES_PRO is not set +# CONFIG_IP860 is not set +# CONFIG_LWMON is not set +# CONFIG_PCU_E is not set +# CONFIG_CCM is not set +# CONFIG_LANTEC is not set +# CONFIG_MBX is not set +# CONFIG_WINCEPT is not set +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_HIGHMEM is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_QSPAN is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Macintosh device drivers +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_OAKNET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_CPM_SCC1 is not set +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +CONFIG_SERIAL_CPM_SMC1=y +# CONFIG_SERIAL_CPM_SMC2 is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# MPC8xx CPM Options +# +CONFIG_SCC_ENET=y +CONFIG_SCC1_ENET=y +# CONFIG_SCC2_ENET is not set +# CONFIG_SCC3_ENET is not set +# CONFIG_FEC_ENET is not set +# CONFIG_ENET_BIG_BUFFERS is not set + +# +# Generic MPC8xx Options +# +# CONFIG_8xx_COPYBACK is not set +# CONFIG_8xx_CPU6 is not set +CONFIG_NO_UCODE_PATCH=y +# CONFIG_USB_SOF_UCODE_PATCH is not set +# CONFIG_I2C_SPI_UCODE_PATCH is not set +# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/mpc885ads_defconfig b/arch/ppc/configs/mpc885ads_defconfig new file mode 100644 index 000000000000..016f94d9325f --- /dev/null +++ b/arch/ppc/configs/mpc885ads_defconfig @@ -0,0 +1,622 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-rc6 +# Thu Jun 9 21:17:29 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +CONFIG_8xx=y +# CONFIG_E500 is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_CPU_FREQ is not set +CONFIG_EMBEDDEDBOOT=y +# CONFIG_PM is not set +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +# CONFIG_RPXLITE is not set +# CONFIG_RPXCLASSIC is not set +# CONFIG_BSEIP is not set +# CONFIG_FADS is not set +CONFIG_MPC885ADS=y +# CONFIG_TQM823L is not set +# CONFIG_TQM850L is not set +# CONFIG_TQM855L is not set +# CONFIG_TQM860L is not set +# CONFIG_FPS850L is not set +# CONFIG_SPD823TS is not set +# CONFIG_IVMS8 is not set +# CONFIG_IVML24 is not set +# CONFIG_SM850 is not set +# CONFIG_HERMES_PRO is not set +# CONFIG_IP860 is not set +# CONFIG_LWMON is not set +# CONFIG_PCU_E is not set +# CONFIG_CCM is not set +# CONFIG_LANTEC is not set +# CONFIG_MBX is not set +# CONFIG_WINCEPT is not set +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_HIGHMEM is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_QSPAN is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Macintosh device drivers +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_OAKNET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +CONFIG_PPP_SYNC_TTY=y +CONFIG_PPP_DEFLATE=y +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_CPM_SCC1 is not set +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +CONFIG_SERIAL_CPM_SMC1=y +CONFIG_SERIAL_CPM_SMC2=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# MPC8xx CPM Options +# +CONFIG_SCC_ENET=y +# CONFIG_SCC1_ENET is not set +# CONFIG_SCC2_ENET is not set +CONFIG_SCC3_ENET=y +# CONFIG_FEC_ENET is not set +# CONFIG_ENET_BIG_BUFFERS is not set + +# +# Generic MPC8xx Options +# +CONFIG_8xx_COPYBACK=y +CONFIG_8xx_CPU6=y +CONFIG_NO_UCODE_PATCH=y +# CONFIG_USB_SOF_UCODE_PATCH is not set +# CONFIG_I2C_SPI_UCODE_PATCH is not set +# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/pmac_defconfig b/arch/ppc/configs/pmac_defconfig index 8eebb0455766..a2db8b541c9b 100644 --- a/arch/ppc/configs/pmac_defconfig +++ b/arch/ppc/configs/pmac_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Sun Feb 13 14:56:58 2005 +# Linux kernel version: 2.6.13-rc3 +# Wed Jul 13 14:13:13 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y @@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options @@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -28,7 +30,7 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_AUDIT is not set CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y @@ -37,15 +39,18 @@ CONFIG_IKCONFIG_PROC=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -67,12 +72,16 @@ CONFIG_6xx=y # CONFIG_POWER3 is not set # CONFIG_POWER4 is not set # CONFIG_8xx is not set +# CONFIG_E200 is not set # CONFIG_E500 is not set +CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_TAU=y # CONFIG_TAU_INT is not set # CONFIG_TAU_AVERAGE is not set +# CONFIG_KEXEC is not set CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=m CONFIG_CPU_FREQ_STAT_DETAILS=y @@ -82,8 +91,8 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_CPU_FREQ_PMAC=y -CONFIG_CPU_FREQ_TABLE=y CONFIG_PPC601_SYNC_FIX=y CONFIG_PM=y CONFIG_PPC_STD_MMU=y @@ -100,6 +109,7 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_POWERPMC250 is not set # CONFIG_CHESTNUT is not set # CONFIG_SPRUCE is not set +# CONFIG_HDPU is not set # CONFIG_EV64260 is not set # CONFIG_LOPEC is not set # CONFIG_MCPN765 is not set @@ -108,6 +118,7 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PRPMC750 is not set # CONFIG_PRPMC800 is not set # CONFIG_SANDPOINT is not set +# CONFIG_RADSTONE_PPC7D is not set # CONFIG_ADIR is not set # CONFIG_K2 is not set # CONFIG_PAL4 is not set @@ -120,19 +131,37 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_ADS8272 is not set # CONFIG_PQ2FADS is not set # CONFIG_LITE5200 is not set +# CONFIG_MPC834x_SYS is not set CONFIG_PPC_CHRP=y CONFIG_PPC_PMAC=y CONFIG_PPC_PREP=y CONFIG_PPC_OF=y CONFIG_PPCBUG_NVRAM=y # CONFIG_SMP is not set -# CONFIG_PREEMPT is not set # CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_PROC_DEVICETREE=y # CONFIG_PREP_RESIDUAL is not set # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM_DEBUG is not set +CONFIG_SOFTWARE_SUSPEND=y +CONFIG_PM_STD_PARTITION="" +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y # # Bus options @@ -143,6 +172,7 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -150,6 +180,8 @@ CONFIG_PCI_NAMES=y CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m +# CONFIG_PCMCIA_LOAD_CIS is not set +# CONFIG_PCMCIA_IOCTL is not set CONFIG_CARDBUS=y # @@ -175,6 +207,194 @@ CONFIG_TASK_SIZE=0xc0000000 CONFIG_BOOT_LOAD=0x00800000 # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_NSC_FIR is not set +# CONFIG_WINBOND_FIR is not set +# CONFIG_TOSHIBA_FIR is not set +# CONFIG_SMC_IRCC_FIR is not set +# CONFIG_ALI_FIR is not set +# CONFIG_VLSI_FIR is not set +# CONFIG_VIA_FIR is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -183,7 +403,7 @@ CONFIG_BOOT_LOAD=0x00800000 # # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # @@ -279,6 +499,7 @@ CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set CONFIG_BLK_DEV_PDC202XX_NEW=y @@ -313,6 +534,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -350,7 +572,6 @@ CONFIG_SCSI_AIC7XXX_OLD=m # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -362,7 +583,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -371,6 +591,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set @@ -398,6 +619,8 @@ CONFIG_SCSI_MAC53C94=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support @@ -411,6 +634,7 @@ CONFIG_IEEE1394=m # CONFIG_IEEE1394_OUI_DB is not set CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y CONFIG_IEEE1394_CONFIG_ROM_IP1394=y +# CONFIG_IEEE1394_EXPORT_FULL_API is not set # # Device Drivers @@ -441,8 +665,8 @@ CONFIG_IEEE1394_AMDTP=m CONFIG_ADB=y CONFIG_ADB_CUDA=y CONFIG_ADB_PMU=y -CONFIG_PMAC_PBOOK=y CONFIG_PMAC_APM_EMU=y +CONFIG_PMAC_MEDIABAY=y CONFIG_PMAC_BACKLIGHT=y CONFIG_ADB_MACIO=y CONFIG_INPUT_ADBHID=y @@ -452,192 +676,13 @@ CONFIG_THERM_ADT746X=m # CONFIG_ANSLCD is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m - -# -# Dongle support -# -# CONFIG_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers +# Network device support # -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -# CONFIG_TOSHIBA_FIR is not set -# CONFIG_VLSI_FIR is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set +CONFIG_TUN=m # # ARCnet devices @@ -691,9 +736,12 @@ CONFIG_PCNET32=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -768,7 +816,7 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set +CONFIG_NETCONSOLE=m # # ISDN subsystem @@ -798,14 +846,6 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -823,6 +863,12 @@ CONFIG_INPUT_MOUSE=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -845,6 +891,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_PMACZILOG=y CONFIG_SERIAL_PMACZILOG_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -876,6 +923,7 @@ CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set # # PCMCIA character devices @@ -884,6 +932,11 @@ CONFIG_DRM_RADEON=m # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # CONFIG_I2C=y @@ -907,12 +960,12 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_HYDRA is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=m # CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -924,45 +977,20 @@ CONFIG_I2C_KEYWEST=m # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_SENSOR is not set # -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support +# Miscellaneous I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -974,6 +1002,11 @@ CONFIG_I2C_KEYWEST=m # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set + +# # Misc devices # @@ -991,6 +1024,11 @@ CONFIG_I2C_KEYWEST=m # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -1004,6 +1042,7 @@ CONFIG_FB_CT65550=y # CONFIG_FB_ASILIANT is not set CONFIG_FB_IMSTT=y # CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y @@ -1029,6 +1068,7 @@ CONFIG_FB_3DFX=y CONFIG_FB_3DFX_ACCEL=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -1110,6 +1150,7 @@ CONFIG_SND_DUMMY=m # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set @@ -1128,6 +1169,7 @@ CONFIG_SND_DUMMY=m # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set # # ALSA PowerMac devices @@ -1152,6 +1194,8 @@ CONFIG_SND_USB_USX2Y=m # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1163,14 +1207,15 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1197,12 +1242,15 @@ CONFIG_USB_HIDINPUT=y CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set # # USB Imaging devices @@ -1227,6 +1275,8 @@ CONFIG_USB_HIDDEV=y CONFIG_USB_PEGASUS=m # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_MON is not set # # USB port drivers @@ -1237,9 +1287,11 @@ CONFIG_USB_PEGASUS=m # CONFIG_USB_SERIAL=m # CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set @@ -1268,10 +1320,12 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set CONFIG_USB_EZUSB=y @@ -1289,10 +1343,11 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -1311,12 +1366,17 @@ CONFIG_USB_EZUSB=y # CONFIG_INFINIBAND is not set # +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -1326,6 +1386,7 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y # # XFS support @@ -1333,6 +1394,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -1363,7 +1425,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS_XATTR=y CONFIG_DEVPTS_FS_SECURITY=y CONFIG_TMPFS=y @@ -1394,15 +1455,20 @@ CONFIG_CRAMFS=m # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -1494,8 +1560,10 @@ CONFIG_ZLIB_DEFLATE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/arch/ppc/configs/radstone_ppc7d_defconfig b/arch/ppc/configs/radstone_ppc7d_defconfig index 7f6467e77949..ca4d1fd0ca05 100644 --- a/arch/ppc/configs/radstone_ppc7d_defconfig +++ b/arch/ppc/configs/radstone_ppc7d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11 -# Tue Mar 15 14:31:19 2005 +# Linux kernel version: 2.6.13-rc3 +# Tue Jul 26 00:02:09 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y @@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options @@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -35,6 +37,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -67,9 +71,12 @@ CONFIG_6xx=y # CONFIG_POWER3 is not set # CONFIG_POWER4 is not set # CONFIG_8xx is not set +# CONFIG_E200 is not set # CONFIG_E500 is not set +CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y # CONFIG_TAU is not set +# CONFIG_KEXEC is not set # CONFIG_CPU_FREQ is not set CONFIG_PPC_GEN550=y # CONFIG_PM is not set @@ -84,21 +91,18 @@ CONFIG_PPC_STD_MMU=y # CONFIG_KATANA is not set # CONFIG_WILLOW is not set # CONFIG_CPCI690 is not set -# CONFIG_PCORE is not set # CONFIG_POWERPMC250 is not set # CONFIG_CHESTNUT is not set # CONFIG_SPRUCE is not set +# CONFIG_HDPU is not set # CONFIG_EV64260 is not set # CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set # CONFIG_MVME5100 is not set # CONFIG_PPLUS is not set # CONFIG_PRPMC750 is not set # CONFIG_PRPMC800 is not set # CONFIG_SANDPOINT is not set CONFIG_RADSTONE_PPC7D=y -# CONFIG_ADIR is not set -# CONFIG_K2 is not set # CONFIG_PAL4 is not set # CONFIG_GEMINI is not set # CONFIG_EST8260 is not set @@ -121,10 +125,18 @@ CONFIG_MV64X60_NEW_BASE=0xfef00000 # CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,9600" +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # Bus options @@ -155,6 +167,69 @@ CONFIG_TASK_SIZE=0x80000000 CONFIG_BOOT_LOAD=0x00800000 # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=y +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -203,6 +278,7 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set @@ -210,13 +286,13 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -299,6 +375,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -331,7 +408,6 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -343,7 +419,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -352,6 +427,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set @@ -366,6 +442,8 @@ CONFIG_SCSI_QLA2XXX=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support @@ -382,71 +460,8 @@ CONFIG_SCSI_QLA2XXX=y # # -# Networking support +# Network device support # -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -CONFIG_BRIDGE=y -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -511,9 +526,11 @@ CONFIG_E100=y # CONFIG_YELLOWFIN is not set CONFIG_R8169=y CONFIG_R8169_NAPI=y +# CONFIG_SKGE is not set CONFIG_SK98LIN=y # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set CONFIG_MV643XX_ETH=y CONFIG_MV643XX_ETH_0=y CONFIG_MV643XX_ETH_1=y @@ -546,6 +563,8 @@ CONFIG_MV643XX_ETH_1=y # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -598,7 +617,6 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -623,6 +641,7 @@ CONFIG_SERIAL_MPSC=y # CONFIG_SERIAL_MPSC_CONSOLE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -690,11 +709,11 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -707,16 +726,41 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set CONFIG_I2C_MV64XXX=y +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +CONFIG_SENSORS_DS1337=y +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -732,33 +776,18 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set CONFIG_SENSORS_LM90=y +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -813,14 +842,20 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_INFINIBAND is not set # +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # # XFS support @@ -828,6 +863,7 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -854,7 +890,6 @@ CONFIG_ISO9660_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set @@ -874,8 +909,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -892,12 +926,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set diff --git a/arch/ppc/configs/sandpoint_defconfig b/arch/ppc/configs/sandpoint_defconfig index 0f4393a07f82..fb493a67c60d 100644 --- a/arch/ppc/configs/sandpoint_defconfig +++ b/arch/ppc/configs/sandpoint_defconfig @@ -437,7 +437,7 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index b284451802c9..b1457a8a9c0f 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -26,7 +26,10 @@ obj-$(CONFIG_KGDB) += ppc-stub.o obj-$(CONFIG_SMP) += smp.o smp-tbsync.o obj-$(CONFIG_TAU) += temp.o obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o +ifndef CONFIG_E200 obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o +endif +obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o ifndef CONFIG_MATH_EMULATION obj-$(CONFIG_8xx) += softemu8xx.o diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c index 01c226008dbf..8a3d74f2531e 100644 --- a/arch/ppc/kernel/cputable.c +++ b/arch/ppc/kernel/cputable.c @@ -852,6 +852,26 @@ struct cpu_spec cpu_specs[] = { #endif /* CONFIG_40x */ #ifdef CONFIG_44x + { + .pvr_mask = 0xf0000fff, + .pvr_value = 0x40000850, + .cpu_name = "440EP Rev. A", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB, + .cpu_user_features = COMMON_PPC, /* 440EP has an FPU */ + .icache_bsize = 32, + .dcache_bsize = 32, + }, + { + .pvr_mask = 0xf0000fff, + .pvr_value = 0x400008d3, + .cpu_name = "440EP Rev. B", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB, + .cpu_user_features = COMMON_PPC, /* 440EP has an FPU */ + .icache_bsize = 32, + .dcache_bsize = 32, + }, { /* 440GP Rev. B */ .pvr_mask = 0xf0000fff, .pvr_value = 0x40000440, @@ -903,7 +923,30 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 32, }, #endif /* CONFIG_44x */ -#ifdef CONFIG_E500 +#ifdef CONFIG_FSL_BOOKE + { /* e200z5 */ + .pvr_mask = 0xfff00000, + .pvr_value = 0x81000000, + .cpu_name = "e200z5", + /* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */ + .cpu_features = CPU_FTR_USE_TB, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_EFP_SINGLE | + PPC_FEATURE_UNIFIED_CACHE, + .dcache_bsize = 32, + }, + { /* e200z6 */ + .pvr_mask = 0xfff00000, + .pvr_value = 0x81100000, + .cpu_name = "e200z6", + /* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */ + .cpu_features = CPU_FTR_USE_TB, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_SPE_COMP | + PPC_FEATURE_HAS_EFP_SINGLE | + PPC_FEATURE_UNIFIED_CACHE, + .dcache_bsize = 32, + }, { /* e500 */ .pvr_mask = 0xffff0000, .pvr_value = 0x80200000, diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index 8377b6ca26da..cb83045e2edf 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -60,6 +60,11 @@ mcheck_transfer_to_handler: TRANSFER_TO_HANDLER_EXC_LEVEL(MCHECK) b transfer_to_handler_full + .globl debug_transfer_to_handler +debug_transfer_to_handler: + TRANSFER_TO_HANDLER_EXC_LEVEL(DEBUG) + b transfer_to_handler_full + .globl crit_transfer_to_handler crit_transfer_to_handler: TRANSFER_TO_HANDLER_EXC_LEVEL(CRIT) @@ -210,6 +215,7 @@ syscall_dotrace_cont: lwzx r10,r10,r0 /* Fetch system call handler [ptr] */ mtlr r10 addi r9,r1,STACK_FRAME_OVERHEAD + PPC440EP_ERR42 blrl /* Call handler */ .globl ret_from_syscall ret_from_syscall: @@ -835,6 +841,10 @@ ret_from_crit_exc: RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI) #ifdef CONFIG_BOOKE + .globl ret_from_debug_exc +ret_from_debug_exc: + RET_FROM_EXC_LEVEL(SPRN_DSRR0, SPRN_DSRR1, RFDI) + .globl ret_from_mcheck_exc ret_from_mcheck_exc: RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, RFMCI) diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 6c7ae6052464..69ff3a9961e8 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -179,24 +179,26 @@ skpinv: addi r4,r4,1 /* Increment */ 4: #ifdef CONFIG_SERIAL_TEXT_DEBUG /* - * Add temporary UART mapping for early debug. This - * mapping must be identical to that used by the early - * bootloader code since the same asm/serial.h parameters - * are used for polled operation. + * Add temporary UART mapping for early debug. + * We can map UART registers wherever we want as long as they don't + * interfere with other system mappings (e.g. with pinned entries). + * For an example of how we handle this - see ocotea.h. --ebs */ /* pageid fields */ lis r3,UART0_IO_BASE@h - ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M + ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K /* xlat fields */ lis r4,UART0_PHYS_IO_BASE@h /* RPN depends on SoC */ +#ifndef CONFIG_440EP ori r4,r4,0x0001 /* ERPN is 1 for second 4GB page */ +#endif /* attrib fields */ li r5,0 ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G) - li r0,1 /* TLB slot 1 */ + li r0,0 /* TLB slot 0 */ tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */ tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */ @@ -228,6 +230,16 @@ skpinv: addi r4,r4,1 /* Increment */ lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ mtspr SPRN_IVPR,r4 +#ifdef CONFIG_440EP + /* Clear DAPUIB flag in CCR0 (enable APU between CPU and FPU) */ + mfspr r2,SPRN_CCR0 + lis r3,0xffef + ori r3,r3,0xffff + and r2,r2,r3 + mtspr SPRN_CCR0,r2 + isync +#endif + /* * This is where the main kernel code starts. */ diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S index 5a7a64e91fc5..eb18cadb3755 100644 --- a/arch/ppc/kernel/head_8xx.S +++ b/arch/ppc/kernel/head_8xx.S @@ -288,13 +288,11 @@ SystemCall: * For the MPC8xx, this is a software tablewalk to load the instruction * TLB. It is modelled after the example in the Motorola manual. The task * switch loads the M_TWB register with the pointer to the first level table. - * If we discover there is no second level table (the value is zero), the - * plan was to load that into the TLB, which causes another fault into the - * TLB Error interrupt where we can handle such problems. However, that did - * not work, so if we discover there is no second level table, we restore - * registers and branch to the error exception. We have to use the MD_xxx - * registers for the tablewalk because the equivalent MI_xxx registers - * only perform the attribute functions. + * If we discover there is no second level table (value is zero) or if there + * is an invalid pte, we load that into the TLB, which causes another fault + * into the TLB Error interrupt where we can handle such problems. + * We have to use the MD_xxx registers for the tablewalk because the + * equivalent MI_xxx registers only perform the attribute functions. */ InstructionTLBMiss: #ifdef CONFIG_8xx_CPU6 diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h index 9c50f9d2657c..9342acf12e72 100644 --- a/arch/ppc/kernel/head_booke.h +++ b/arch/ppc/kernel/head_booke.h @@ -49,6 +49,7 @@ * * On 40x critical is the only additional level * On 44x/e500 we have critical and machine check + * On e200 we have critical and debug (machine check occurs via critical) * * Additionally we reserve a SPRG for each priority level so we can free up a * GPR to use as the base for indirect access to the exception stacks. This @@ -60,12 +61,16 @@ /* CRIT_SPRG only used in critical exception handling */ #define CRIT_SPRG SPRN_SPRG2 -/* MCHECK_SPRG only used in critical exception handling */ +/* MCHECK_SPRG only used in machine check exception handling */ #define MCHECK_SPRG SPRN_SPRG6W #define MCHECK_STACK_TOP (exception_stack_top - 4096) #define CRIT_STACK_TOP (exception_stack_top) +/* only on e200 for now */ +#define DEBUG_STACK_TOP (exception_stack_top - 4096) +#define DEBUG_SPRG SPRN_SPRG6W + #ifdef CONFIG_SMP #define BOOKE_LOAD_EXC_LEVEL_STACK(level) \ mfspr r8,SPRN_PIR; \ @@ -124,6 +129,8 @@ #define CRITICAL_EXCEPTION_PROLOG \ EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1) +#define DEBUG_EXCEPTION_PROLOG \ + EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1) #define MCHECK_EXCEPTION_PROLOG \ EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1) @@ -205,6 +212,60 @@ label: * save (and later restore) the MSR via SPRN_CSRR1, which will still have * the MSR_DE bit set. */ +#ifdef CONFIG_E200 +#define DEBUG_EXCEPTION \ + START_EXCEPTION(Debug); \ + DEBUG_EXCEPTION_PROLOG; \ + \ + /* \ + * If there is a single step or branch-taken exception in an \ + * exception entry sequence, it was probably meant to apply to \ + * the code where the exception occurred (since exception entry \ + * doesn't turn off DE automatically). We simulate the effect \ + * of turning off DE on entry to an exception handler by turning \ + * off DE in the CSRR1 value and clearing the debug status. \ + */ \ + mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \ + andis. r10,r10,DBSR_IC@h; \ + beq+ 2f; \ + \ + lis r10,KERNELBASE@h; /* check if exception in vectors */ \ + ori r10,r10,KERNELBASE@l; \ + cmplw r12,r10; \ + blt+ 2f; /* addr below exception vectors */ \ + \ + lis r10,Debug@h; \ + ori r10,r10,Debug@l; \ + cmplw r12,r10; \ + bgt+ 2f; /* addr above exception vectors */ \ + \ + /* here it looks like we got an inappropriate debug exception. */ \ +1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \ + lis r10,DBSR_IC@h; /* clear the IC event */ \ + mtspr SPRN_DBSR,r10; \ + /* restore state and get out */ \ + lwz r10,_CCR(r11); \ + lwz r0,GPR0(r11); \ + lwz r1,GPR1(r11); \ + mtcrf 0x80,r10; \ + mtspr SPRN_DSRR0,r12; \ + mtspr SPRN_DSRR1,r9; \ + lwz r9,GPR9(r11); \ + lwz r12,GPR12(r11); \ + mtspr DEBUG_SPRG,r8; \ + BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \ + lwz r10,GPR10-INT_FRAME_SIZE(r8); \ + lwz r11,GPR11-INT_FRAME_SIZE(r8); \ + mfspr r8,DEBUG_SPRG; \ + \ + RFDI; \ + b .; \ + \ + /* continue normal handling for a critical exception... */ \ +2: mfspr r4,SPRN_DBSR; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc) +#else #define DEBUG_EXCEPTION \ START_EXCEPTION(Debug); \ CRITICAL_EXCEPTION_PROLOG; \ @@ -257,6 +318,7 @@ label: 2: mfspr r4,SPRN_DBSR; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc) +#endif #define INSTRUCTION_STORAGE_EXCEPTION \ START_EXCEPTION(InstructionStorage) \ diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index ce36e88ba627..eb804b7a3cb2 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -102,6 +102,7 @@ invstr: mflr r6 /* Make it accessible */ or r7,r7,r4 mtspr SPRN_MAS6,r7 tlbsx 0,r6 /* search MSR[IS], SPID=PID0 */ +#ifndef CONFIG_E200 mfspr r7,SPRN_MAS1 andis. r7,r7,MAS1_VALID@h bne match_TLB @@ -118,6 +119,7 @@ invstr: mflr r6 /* Make it accessible */ or r7,r7,r4 mtspr SPRN_MAS6,r7 tlbsx 0,r6 /* Fall through, we had to match */ +#endif match_TLB: mfspr r7,SPRN_MAS0 rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */ @@ -196,8 +198,10 @@ skpinv: addi r6,r6,1 /* Increment */ /* 4. Clear out PIDs & Search info */ li r6,0 mtspr SPRN_PID0,r6 +#ifndef CONFIG_E200 mtspr SPRN_PID1,r6 mtspr SPRN_PID2,r6 +#endif mtspr SPRN_MAS6,r6 /* 5. Invalidate mapping we started in */ @@ -277,7 +281,9 @@ skpinv: addi r6,r6,1 /* Increment */ SET_IVOR(32, SPEUnavailable); SET_IVOR(33, SPEFloatingPointData); SET_IVOR(34, SPEFloatingPointRound); +#ifndef CONFIG_E200 SET_IVOR(35, PerformanceMonitor); +#endif /* Establish the interrupt vector base */ lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ @@ -285,6 +291,9 @@ skpinv: addi r6,r6,1 /* Increment */ /* Setup the defaults for TLB entries */ li r2,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l +#ifdef CONFIG_E200 + oris r2,r2,MAS4_TLBSELD(1)@h +#endif mtspr SPRN_MAS4, r2 #if 0 @@ -293,6 +302,12 @@ skpinv: addi r6,r6,1 /* Increment */ oris r2,r2,HID0_DOZE@h mtspr SPRN_HID0, r2 #endif +#ifdef CONFIG_E200 + /* enable dedicated debug exception handling resources (Debug APU) */ + mfspr r2,SPRN_HID0 + ori r2,r2,HID0_DAPUEN@l + mtspr SPRN_HID0,r2 +#endif #if !defined(CONFIG_BDI_SWITCH) /* @@ -414,7 +429,12 @@ interrupt_base: CRITICAL_EXCEPTION(0x0100, CriticalInput, UnknownException) /* Machine Check Interrupt */ +#ifdef CONFIG_E200 + /* no RFMCI, MCSRRs on E200 */ + CRITICAL_EXCEPTION(0x0200, MachineCheck, MachineCheckException) +#else MCHECK_EXCEPTION(0x0200, MachineCheck, MachineCheckException) +#endif /* Data Storage Interrupt */ START_EXCEPTION(DataStorage) @@ -520,8 +540,13 @@ interrupt_base: #ifdef CONFIG_PPC_FPU FP_UNAVAILABLE_EXCEPTION #else +#ifdef CONFIG_E200 + /* E200 treats 'normal' floating point instructions as FP Unavail exception */ + EXCEPTION(0x0800, FloatingPointUnavailable, ProgramCheckException, EXC_XFER_EE) +#else EXCEPTION(0x0800, FloatingPointUnavailable, UnknownException, EXC_XFER_EE) #endif +#endif /* System Call Interrupt */ START_EXCEPTION(SystemCall) @@ -691,6 +716,7 @@ interrupt_base: /* * Local functions */ + /* * Data TLB exceptions will bail out to this point * if they can't resolve the lightweight TLB fault. @@ -761,6 +787,31 @@ END_FTR_SECTION_IFSET(CPU_FTR_BIG_PHYS) 2: rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */ mtspr SPRN_MAS3, r11 #endif +#ifdef CONFIG_E200 + /* Round robin TLB1 entries assignment */ + mfspr r12, SPRN_MAS0 + + /* Extract TLB1CFG(NENTRY) */ + mfspr r11, SPRN_TLB1CFG + andi. r11, r11, 0xfff + + /* Extract MAS0(NV) */ + andi. r13, r12, 0xfff + addi r13, r13, 1 + cmpw 0, r13, r11 + addi r12, r12, 1 + + /* check if we need to wrap */ + blt 7f + + /* wrap back to first free tlbcam entry */ + lis r13, tlbcam_index@ha + lwz r13, tlbcam_index@l(r13) + rlwimi r12, r13, 0, 20, 31 +7: + mtspr SPRN_MAS0,r12 +#endif /* CONFIG_E200 */ + tlbwe /* Done...restore registers and get out of here. */ diff --git a/arch/ppc/kernel/machine_kexec.c b/arch/ppc/kernel/machine_kexec.c new file mode 100644 index 000000000000..a72787747df7 --- /dev/null +++ b/arch/ppc/kernel/machine_kexec.c @@ -0,0 +1,124 @@ +/* + * machine_kexec.c - handle transition of Linux booting another kernel + * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com> + * + * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/mm.h> +#include <linux/kexec.h> +#include <linux/delay.h> +#include <linux/reboot.h> +#include <asm/pgtable.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> +#include <asm/io.h> +#include <asm/hw_irq.h> +#include <asm/cacheflush.h> +#include <asm/machdep.h> + +typedef NORET_TYPE void (*relocate_new_kernel_t)( + unsigned long indirection_page, + unsigned long reboot_code_buffer, + unsigned long start_address) ATTRIB_NORET; + +const extern unsigned char relocate_new_kernel[]; +const extern unsigned int relocate_new_kernel_size; + +/* + * Provide a dummy crash_notes definition while crash dump arrives to ppc. + * This prevents breakage of crash_notes attribute in kernel/ksysfs.c. + */ +void *crash_notes = NULL; + +void machine_shutdown(void) +{ + if (ppc_md.machine_shutdown) + ppc_md.machine_shutdown(); +} + +void machine_crash_shutdown(struct pt_regs *regs) +{ + if (ppc_md.machine_crash_shutdown) + ppc_md.machine_crash_shutdown(); +} + +/* + * Do what every setup is needed on image and the + * reboot code buffer to allow us to avoid allocations + * later. + */ +int machine_kexec_prepare(struct kimage *image) +{ + if (ppc_md.machine_kexec_prepare) + return ppc_md.machine_kexec_prepare(image); + /* + * Fail if platform doesn't provide its own machine_kexec_prepare + * implementation. + */ + return -ENOSYS; +} + +void machine_kexec_cleanup(struct kimage *image) +{ + if (ppc_md.machine_kexec_cleanup) + ppc_md.machine_kexec_cleanup(image); +} + +/* + * Do not allocate memory (or fail in any way) in machine_kexec(). + * We are past the point of no return, committed to rebooting now. + */ +NORET_TYPE void machine_kexec(struct kimage *image) +{ + if (ppc_md.machine_kexec) + ppc_md.machine_kexec(image); + else { + /* + * Fall back to normal restart if platform doesn't provide + * its own kexec function, and user insist to kexec... + */ + machine_restart(NULL); + } + for(;;); +} + +/* + * This is a generic machine_kexec function suitable at least for + * non-OpenFirmware embedded platforms. + * It merely copies the image relocation code to the control page and + * jumps to it. + * A platform specific function may just call this one. + */ +void machine_kexec_simple(struct kimage *image) +{ + unsigned long page_list; + unsigned long reboot_code_buffer, reboot_code_buffer_phys; + relocate_new_kernel_t rnk; + + /* Interrupts aren't acceptable while we reboot */ + local_irq_disable(); + + page_list = image->head; + + /* we need both effective and real address here */ + reboot_code_buffer = + (unsigned long)page_address(image->control_code_page); + reboot_code_buffer_phys = virt_to_phys((void *)reboot_code_buffer); + + /* copy our kernel relocation code to the control code page */ + memcpy((void *)reboot_code_buffer, relocate_new_kernel, + relocate_new_kernel_size); + + flush_icache_range(reboot_code_buffer, + reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE); + printk(KERN_INFO "Bye!\n"); + + /* now call it */ + rnk = (relocate_new_kernel_t) reboot_code_buffer; + (*rnk)(page_list, reboot_code_buffer_phys, image->start); +} + diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index 7329ef177a18..ce71b4a01585 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -593,6 +593,14 @@ _GLOBAL(flush_instruction_cache) iccci 0,r3 #endif #elif CONFIG_FSL_BOOKE +BEGIN_FTR_SECTION + mfspr r3,SPRN_L1CSR0 + ori r3,r3,L1CSR0_CFI|L1CSR0_CLFC + /* msync; isync recommended here */ + mtspr SPRN_L1CSR0,r3 + isync + blr +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) mfspr r3,SPRN_L1CSR1 ori r3,r3,L1CSR1_ICFI|L1CSR1_ICLFR mtspr SPRN_L1CSR1,r3 @@ -1137,6 +1145,7 @@ _GLOBAL(kernel_thread) stwu r0,-16(r1) mtlr r30 /* fn addr in lr */ mr r3,r31 /* load arg and call fn */ + PPC440EP_ERR42 blrl li r0,__NR_exit /* exit if function returns */ li r3,0 @@ -1436,8 +1445,13 @@ _GLOBAL(sys_call_table) .long sys_mq_timedreceive /* 265 */ .long sys_mq_notify .long sys_mq_getsetattr - .long sys_ni_syscall /* 268 reserved for sys_kexec_load */ + .long sys_kexec_load .long sys_add_key .long sys_request_key /* 270 */ .long sys_keyctl .long sys_waitid + .long sys_ioprio_set + .long sys_ioprio_get + .long sys_inotify_init /* 275 */ + .long sys_inotify_add_watch + .long sys_inotify_rm_watch diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 6d7b92d72458..7b3586a3bf30 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -160,6 +160,21 @@ void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, } EXPORT_SYMBOL(pcibios_resource_to_bus); +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + unsigned long offset = 0; + struct pci_controller *hose = dev->sysdata; + + if (hose && res->flags & IORESOURCE_IO) + offset = (unsigned long)hose->io_base_virt - isa_io_base; + else if (hose && res->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; + res->start = region->start + offset; + res->end = region->end + offset; +} +EXPORT_SYMBOL(pcibios_bus_to_resource); + /* * We need to avoid collisions with `mirrored' VGA ports * and other strange ISA hardware, so we always want the @@ -1495,7 +1510,7 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, *offset += hose->pci_mem_offset; res_bit = IORESOURCE_MEM; } else { - io_offset = (unsigned long)hose->io_base_virt; + io_offset = hose->io_base_virt - ___IO_BASE; *offset += io_offset; res_bit = IORESOURCE_IO; } @@ -1522,7 +1537,7 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, /* found it! construct the final physical address */ if (mmap_state == pci_mmap_io) - *offset += hose->io_base_phys - _IO_BASE; + *offset += hose->io_base_phys - io_offset; return rp; } @@ -1739,6 +1754,23 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn) return result; } +void pci_resource_to_user(const struct pci_dev *dev, int bar, + const struct resource *rsrc, + u64 *start, u64 *end) +{ + struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); + unsigned long offset = 0; + + if (hose == NULL) + return; + + if (rsrc->flags & IORESOURCE_IO) + offset = ___IO_BASE - hose->io_base_virt + hose->io_base_phys; + + *start = rsrc->start + offset; + *end = rsrc->end + offset; +} + void __init pci_init_resource(struct resource *res, unsigned long start, unsigned long end, int flags, char *name) diff --git a/arch/ppc/kernel/perfmon.c b/arch/ppc/kernel/perfmon.c index 918f6b252e45..fa1dad96b830 100644 --- a/arch/ppc/kernel/perfmon.c +++ b/arch/ppc/kernel/perfmon.c @@ -36,7 +36,7 @@ /* A lock to regulate grabbing the interrupt */ DEFINE_SPINLOCK(perfmon_lock); -#ifdef CONFIG_FSL_BOOKE +#if defined (CONFIG_FSL_BOOKE) && !defined (CONFIG_E200) static void dummy_perf(struct pt_regs *regs) { unsigned int pmgc0 = mfpmr(PMRN_PMGC0); diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index d59ad07de8e7..e7d40cc6c1b6 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -324,7 +324,7 @@ EXPORT_SYMBOL(__res); EXPORT_SYMBOL(next_mmu_context); EXPORT_SYMBOL(set_context); -EXPORT_SYMBOL(handle_mm_fault); /* For MOL */ +EXPORT_SYMBOL_GPL(__handle_mm_fault); /* For MOL */ EXPORT_SYMBOL(disarm_decr); #ifdef CONFIG_PPC_STD_MMU extern long mol_trampoline; diff --git a/arch/ppc/kernel/relocate_kernel.S b/arch/ppc/kernel/relocate_kernel.S new file mode 100644 index 000000000000..9b2ad48e988c --- /dev/null +++ b/arch/ppc/kernel/relocate_kernel.S @@ -0,0 +1,123 @@ +/* + * relocate_kernel.S - put the kernel image in place to boot + * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com> + * + * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <asm/reg.h> +#include <asm/ppc_asm.h> +#include <asm/processor.h> + +#include <asm/kexec.h> + +#define PAGE_SIZE 4096 /* must be same value as in <asm/page.h> */ + + /* + * Must be relocatable PIC code callable as a C function. + */ + .globl relocate_new_kernel +relocate_new_kernel: + /* r3 = page_list */ + /* r4 = reboot_code_buffer */ + /* r5 = start_address */ + + li r0, 0 + + /* + * Set Machine Status Register to a known status, + * switch the MMU off and jump to 1: in a single step. + */ + + mr r8, r0 + ori r8, r8, MSR_RI|MSR_ME + mtspr SPRN_SRR1, r8 + addi r8, r4, 1f - relocate_new_kernel + mtspr SPRN_SRR0, r8 + sync + rfi + +1: + /* from this point address translation is turned off */ + /* and interrupts are disabled */ + + /* set a new stack at the bottom of our page... */ + /* (not really needed now) */ + addi r1, r4, KEXEC_CONTROL_CODE_SIZE - 8 /* for LR Save+Back Chain */ + stw r0, 0(r1) + + /* Do the copies */ + li r6, 0 /* checksum */ + mr r0, r3 + b 1f + +0: /* top, read another word for the indirection page */ + lwzu r0, 4(r3) + +1: + /* is it a destination page? (r8) */ + rlwinm. r7, r0, 0, 31, 31 /* IND_DESTINATION (1<<0) */ + beq 2f + + rlwinm r8, r0, 0, 0, 19 /* clear kexec flags, page align */ + b 0b + +2: /* is it an indirection page? (r3) */ + rlwinm. r7, r0, 0, 30, 30 /* IND_INDIRECTION (1<<1) */ + beq 2f + + rlwinm r3, r0, 0, 0, 19 /* clear kexec flags, page align */ + subi r3, r3, 4 + b 0b + +2: /* are we done? */ + rlwinm. r7, r0, 0, 29, 29 /* IND_DONE (1<<2) */ + beq 2f + b 3f + +2: /* is it a source page? (r9) */ + rlwinm. r7, r0, 0, 28, 28 /* IND_SOURCE (1<<3) */ + beq 0b + + rlwinm r9, r0, 0, 0, 19 /* clear kexec flags, page align */ + + li r7, PAGE_SIZE / 4 + mtctr r7 + subi r9, r9, 4 + subi r8, r8, 4 +9: + lwzu r0, 4(r9) /* do the copy */ + xor r6, r6, r0 + stwu r0, 4(r8) + dcbst 0, r8 + sync + icbi 0, r8 + bdnz 9b + + addi r9, r9, 4 + addi r8, r8, 4 + b 0b + +3: + + /* To be certain of avoiding problems with self-modifying code + * execute a serializing instruction here. + */ + isync + sync + + /* jump to the entry point, usually the setup routine */ + mtlr r5 + blrl + +1: b 1b + +relocate_new_kernel_end: + + .globl relocate_new_kernel_size +relocate_new_kernel_size: + .long relocate_new_kernel_end - relocate_new_kernel + diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index c42f75326939..929e5d1cc7fe 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -121,8 +121,6 @@ void machine_restart(char *cmd) ppc_md.restart(cmd); } -EXPORT_SYMBOL(machine_restart); - void machine_power_off(void) { #ifdef CONFIG_NVRAM @@ -131,8 +129,6 @@ void machine_power_off(void) ppc_md.power_off(); } -EXPORT_SYMBOL(machine_power_off); - void machine_halt(void) { #ifdef CONFIG_NVRAM @@ -141,8 +137,6 @@ void machine_halt(void) ppc_md.halt(); } -EXPORT_SYMBOL(machine_halt); - void (*pm_power_off)(void) = machine_power_off; #ifdef CONFIG_TAU diff --git a/arch/ppc/kernel/signal.c b/arch/ppc/kernel/signal.c index 7c8437da09d5..8aaeb6f4e750 100644 --- a/arch/ppc/kernel/signal.c +++ b/arch/ppc/kernel/signal.c @@ -705,8 +705,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) unsigned long frame, newsp; int signr, ret; - if (current->flags & PF_FREEZE) { - refrigerator(PF_FREEZE); + if (try_to_freeze()) { signr = 0; if (!signal_pending(current)) goto no_signal; diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c index 735866559199..bf4ddca5e853 100644 --- a/arch/ppc/kernel/time.c +++ b/arch/ppc/kernel/time.c @@ -89,6 +89,9 @@ unsigned long tb_to_ns_scale; extern unsigned long wall_jiffies; +/* used for timezone offset */ +static long timezone_offset; + DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); @@ -170,7 +173,7 @@ void timer_interrupt(struct pt_regs * regs) xtime.tv_sec - last_rtc_update >= 659 && abs((xtime.tv_nsec / 1000) - (1000000-1000000/HZ)) < 500000/HZ && jiffies - wall_jiffies == 1) { - if (ppc_md.set_rtc_time(xtime.tv_sec+1 + time_offset) == 0) + if (ppc_md.set_rtc_time(xtime.tv_sec+1 + timezone_offset) == 0) last_rtc_update = xtime.tv_sec+1; else /* Try again one minute later */ @@ -286,7 +289,7 @@ void __init time_init(void) unsigned old_stamp, stamp, elapsed; if (ppc_md.time_init != NULL) - time_offset = ppc_md.time_init(); + timezone_offset = ppc_md.time_init(); if (__USE_RTC()) { /* 601 processor: dec counts down by 128 every 128ns */ @@ -331,10 +334,10 @@ void __init time_init(void) set_dec(tb_ticks_per_jiffy); /* If platform provided a timezone (pmac), we correct the time */ - if (time_offset) { - sys_tz.tz_minuteswest = -time_offset / 60; + if (timezone_offset) { + sys_tz.tz_minuteswest = -timezone_offset / 60; sys_tz.tz_dsttime = 0; - xtime.tv_sec -= time_offset; + xtime.tv_sec -= timezone_offset; } set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index 2ca8ecfeefd9..9e6ae5696650 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -173,13 +173,13 @@ static inline int check_io_access(struct pt_regs *regs) /* On 4xx, the reason for the machine check or program exception is in the ESR. */ #define get_reason(regs) ((regs)->dsisr) -#ifndef CONFIG_E500 +#ifndef CONFIG_FSL_BOOKE #define get_mc_reason(regs) ((regs)->dsisr) #else #define get_mc_reason(regs) (mfspr(SPRN_MCSR)) #endif #define REASON_FP ESR_FP -#define REASON_ILLEGAL ESR_PIL +#define REASON_ILLEGAL (ESR_PIL | ESR_PUO) #define REASON_PRIVILEGED ESR_PPR #define REASON_TRAP ESR_PTR @@ -302,7 +302,25 @@ void MachineCheckException(struct pt_regs *regs) printk("Bus - Instruction Parity Error\n"); if (reason & MCSR_BUS_RPERR) printk("Bus - Read Parity Error\n"); -#else /* !CONFIG_4xx && !CONFIG_E500 */ +#elif defined (CONFIG_E200) + printk("Machine check in kernel mode.\n"); + printk("Caused by (from MCSR=%lx): ", reason); + + if (reason & MCSR_MCP) + printk("Machine Check Signal\n"); + if (reason & MCSR_CP_PERR) + printk("Cache Push Parity Error\n"); + if (reason & MCSR_CPERR) + printk("Cache Parity Error\n"); + if (reason & MCSR_EXCP_ERR) + printk("ISI, ITLB, or Bus Error on first instruction fetch for an exception handler\n"); + if (reason & MCSR_BUS_IRERR) + printk("Bus - Read Bus Error on instruction fetch\n"); + if (reason & MCSR_BUS_DRERR) + printk("Bus - Read Bus Error on data load\n"); + if (reason & MCSR_BUS_WRERR) + printk("Bus - Write Bus Error on buffered store or cache line push\n"); +#else /* !CONFIG_4xx && !CONFIG_E500 && !CONFIG_E200 */ printk("Machine check in kernel mode.\n"); printk("Caused by (from SRR1=%lx): ", reason); switch (reason & 0x601F0000) { diff --git a/arch/ppc/mm/44x_mmu.c b/arch/ppc/mm/44x_mmu.c index 72f7c0d1c0ed..3d79ce281b67 100644 --- a/arch/ppc/mm/44x_mmu.c +++ b/arch/ppc/mm/44x_mmu.c @@ -39,7 +39,6 @@ #include <linux/vmalloc.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/bootmem.h> #include <linux/highmem.h> #include <asm/pgalloc.h> diff --git a/arch/ppc/mm/4xx_mmu.c b/arch/ppc/mm/4xx_mmu.c index a7f616140381..b7bcbc232f39 100644 --- a/arch/ppc/mm/4xx_mmu.c +++ b/arch/ppc/mm/4xx_mmu.c @@ -36,7 +36,6 @@ #include <linux/vmalloc.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/bootmem.h> #include <linux/highmem.h> #include <asm/pgalloc.h> diff --git a/arch/ppc/mm/fsl_booke_mmu.c b/arch/ppc/mm/fsl_booke_mmu.c index e07990efa046..af9ca0eb6d55 100644 --- a/arch/ppc/mm/fsl_booke_mmu.c +++ b/arch/ppc/mm/fsl_booke_mmu.c @@ -41,7 +41,6 @@ #include <linux/vmalloc.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/bootmem.h> #include <linux/highmem.h> #include <asm/pgalloc.h> @@ -126,7 +125,7 @@ void settlbcam(int index, unsigned long virt, phys_addr_t phys, flags |= _PAGE_COHERENT; #endif - TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index); + TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index) | MAS0_NV(index+1); TLBCAM[index].MAS1 = MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(tsize) | MAS1_TID(pid); TLBCAM[index].MAS2 = virt & PAGE_MASK; diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index 334ef4150d92..33ada72c7330 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -562,6 +562,9 @@ void flush_dcache_icache_page(struct page *page) #ifdef CONFIG_BOOKE __flush_dcache_icache(kmap(page)); kunmap(page); +#elif CONFIG_8xx + /* On 8xx there is no need to kmap since highmem is not supported */ + __flush_dcache_icache(page_address(page)); #else __flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT); #endif @@ -606,9 +609,19 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, struct page *page = pfn_to_page(pfn); if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) { - if (vma->vm_mm == current->active_mm) + if (vma->vm_mm == current->active_mm) { +#ifdef CONFIG_8xx + /* On 8xx, cache control instructions (particularly + * "dcbst" from flush_dcache_icache) fault as write + * operation if there is an unpopulated TLB entry + * for the address in question. To workaround that, + * we invalidate the TLB here, thus avoiding dcbst + * misbehaviour. + */ + _tlbie(address); +#endif __flush_dcache_icache((void *) address); - else + } else flush_dcache_icache_page(page); set_bit(PG_arch_1, &page->flags); } diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index a0612a86455a..f7c045764e04 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -68,6 +68,11 @@ choice depends on 44x default EBONY +config BAMBOO + bool "Bamboo" + help + This option enables support for the IBM PPC440EP evaluation board. + config EBONY bool "Ebony" help @@ -98,6 +103,12 @@ config NP405H depends on ASH default y +config 440EP + bool + depends on BAMBOO + select PPC_FPU + default y + config 440GP bool depends on EBONY @@ -115,7 +126,7 @@ config 440SP config 440 bool - depends on 440GP || 440SP + depends on 440GP || 440SP || 440EP default y config 440A @@ -123,6 +134,11 @@ config 440A depends on 440GX default y +config IBM440EP_ERR42 + bool + depends on 440EP + default y + # All 405-based cores up until the 405GPR and 405EP have this errata. config IBM405_ERR77 bool @@ -142,7 +158,7 @@ config BOOKE config IBM_OCP bool - depends on ASH || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT default y config XILINX_OCP diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index ea470c6adbb6..844c3b5066e8 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -2,6 +2,7 @@ # Makefile for the PowerPC 4xx linux kernel. obj-$(CONFIG_ASH) += ash.o +obj-$(CONFIG_BAMBOO) += bamboo.o obj-$(CONFIG_CPCI405) += cpci405.o obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_EP405) += ep405.o @@ -19,6 +20,7 @@ obj-$(CONFIG_405GP) += ibm405gp.o obj-$(CONFIG_REDWOOD_5) += ibmstb4.o obj-$(CONFIG_NP405H) += ibmnp405h.o obj-$(CONFIG_REDWOOD_6) += ibmstbx25.o +obj-$(CONFIG_440EP) += ibm440ep.o obj-$(CONFIG_440GP) += ibm440gp.o obj-$(CONFIG_440GX) += ibm440gx.o obj-$(CONFIG_440SP) += ibm440sp.o diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c new file mode 100644 index 000000000000..f116787b0b76 --- /dev/null +++ b/arch/ppc/platforms/4xx/bamboo.c @@ -0,0 +1,427 @@ +/* + * arch/ppc/platforms/4xx/bamboo.c + * + * Bamboo board specific routines + * + * Wade Farnsworth <wfarnsworth@mvista.com> + * Copyright 2004 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/types.h> +#include <linux/major.h> +#include <linux/blkdev.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/ide.h> +#include <linux/initrd.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/tty.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/ethtool.h> + +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/dma.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ocp.h> +#include <asm/pci-bridge.h> +#include <asm/time.h> +#include <asm/todc.h> +#include <asm/bootinfo.h> +#include <asm/ppc4xx_pic.h> +#include <asm/ppcboot.h> + +#include <syslib/gen550.h> +#include <syslib/ibm440gx_common.h> + +/* + * This is a horrible kludge, we eventually need to abstract this + * generic PHY stuff, so the standard phy mode defines can be + * easily used from arch code. + */ +#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h" + +bd_t __res; + +static struct ibm44x_clocks clocks __initdata; + +/* + * Bamboo external IRQ triggering/polarity settings + */ +unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = { + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ0: Ethernet transceiver */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* IRQ1: Expansion connector */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ2: PCI slot 0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ3: PCI slot 1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ4: PCI slot 2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ5: PCI slot 3 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE), /* IRQ6: SMI pushbutton */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ7: EXT */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ8: EXT */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ9: EXT */ +}; + +static void __init +bamboo_calibrate_decr(void) +{ + unsigned int freq; + + if (mfspr(SPRN_CCR1) & CCR1_TCS) + freq = BAMBOO_TMRCLK; + else + freq = clocks.cpu; + + ibm44x_calibrate_decr(freq); + +} + +static int +bamboo_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: IBM\n"); + seq_printf(m, "machine\t\t: PPC440EP EVB (Bamboo)\n"); + + return 0; +} + +static inline int +bamboo_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 28, 28, 28, 28 }, /* IDSEL 1 - PCI Slot 0 */ + { 27, 27, 27, 27 }, /* IDSEL 2 - PCI Slot 1 */ + { 26, 26, 26, 26 }, /* IDSEL 3 - PCI Slot 2 */ + { 25, 25, 25, 25 }, /* IDSEL 4 - PCI Slot 3 */ + }; + + const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +static void __init bamboo_set_emacdata(void) +{ + unsigned char * selection1_base; + struct ocp_def *def; + struct ocp_func_emac_data *emacdata; + u8 selection1_val; + int mode; + + selection1_base = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16); + selection1_val = readb(selection1_base); + iounmap((void *) selection1_base); + if (BAMBOO_SEL_MII(selection1_val)) + mode = PHY_MODE_MII; + else if (BAMBOO_SEL_RMII(selection1_val)) + mode = PHY_MODE_RMII; + else + mode = PHY_MODE_SMII; + + /* Set mac_addr and phy mode for each EMAC */ + + def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0); + emacdata = def->additions; + memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6); + emacdata->phy_mode = mode; + + def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1); + emacdata = def->additions; + memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6); + emacdata->phy_mode = mode; +} + +static int +bamboo_exclude_device(unsigned char bus, unsigned char devfn) +{ + return (bus == 0 && devfn == 0); +} + +#define PCI_READW(offset) \ + (readw((void *)((u32)pci_reg_base+offset))) + +#define PCI_WRITEW(value, offset) \ + (writew(value, (void *)((u32)pci_reg_base+offset))) + +#define PCI_WRITEL(value, offset) \ + (writel(value, (void *)((u32)pci_reg_base+offset))) + +static void __init +bamboo_setup_pci(void) +{ + void *pci_reg_base; + unsigned long memory_size; + memory_size = ppc_md.find_end_of_memory(); + + pci_reg_base = ioremap64(BAMBOO_PCIL0_BASE, BAMBOO_PCIL0_SIZE); + + /* Enable PCI I/O, Mem, and Busmaster cycles */ + PCI_WRITEW(PCI_READW(PCI_COMMAND) | + PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER, PCI_COMMAND); + + /* Disable region first */ + PCI_WRITEL(0, BAMBOO_PCIL0_PMM0MA); + + /* PLB starting addr: 0x00000000A0000000 */ + PCI_WRITEL(BAMBOO_PCI_PHY_MEM_BASE, BAMBOO_PCIL0_PMM0LA); + + /* PCI start addr, 0xA0000000 (PCI Address) */ + PCI_WRITEL(BAMBOO_PCI_MEM_BASE, BAMBOO_PCIL0_PMM0PCILA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM0PCIHA); + + /* Enable no pre-fetch, enable region */ + PCI_WRITEL(((0xffffffff - + (BAMBOO_PCI_UPPER_MEM - BAMBOO_PCI_MEM_BASE)) | 0x01), + BAMBOO_PCIL0_PMM0MA); + + /* Disable region one */ + PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM1LA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCILA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCIHA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA); + + /* Disable region two */ + PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM2LA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCILA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCIHA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA); + + /* Now configure the PCI->PLB windows, we only use PTM1 + * + * For Inbound flow, set the window size to all available memory + * This is required because if size is smaller, + * then Eth/PCI DD would fail as PCI card not able to access + * the memory allocated by DD. + */ + + PCI_WRITEL(0, BAMBOO_PCIL0_PTM1MS); /* disabled region 1 */ + PCI_WRITEL(0, BAMBOO_PCIL0_PTM1LA); /* begin of address map */ + + memory_size = 1 << fls(memory_size - 1); + + /* Size low + Enabled */ + PCI_WRITEL((0xffffffff - (memory_size - 1)) | 0x1, BAMBOO_PCIL0_PTM1MS); + + eieio(); + iounmap(pci_reg_base); +} + +static void __init +bamboo_setup_hose(void) +{ + unsigned int bar_response, bar; + struct pci_controller *hose; + + bamboo_setup_pci(); + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + hose->first_busno = 0; + hose->last_busno = 0xff; + + hose->pci_mem_offset = BAMBOO_PCI_MEM_OFFSET; + + pci_init_resource(&hose->io_resource, + BAMBOO_PCI_LOWER_IO, + BAMBOO_PCI_UPPER_IO, + IORESOURCE_IO, + "PCI host bridge"); + + pci_init_resource(&hose->mem_resources[0], + BAMBOO_PCI_LOWER_MEM, + BAMBOO_PCI_UPPER_MEM, + IORESOURCE_MEM, + "PCI host bridge"); + + ppc_md.pci_exclude_device = bamboo_exclude_device; + + hose->io_space.start = BAMBOO_PCI_LOWER_IO; + hose->io_space.end = BAMBOO_PCI_UPPER_IO; + hose->mem_space.start = BAMBOO_PCI_LOWER_MEM; + hose->mem_space.end = BAMBOO_PCI_UPPER_MEM; + isa_io_base = + (unsigned long)ioremap64(BAMBOO_PCI_IO_BASE, BAMBOO_PCI_IO_SIZE); + hose->io_base_virt = (void *)isa_io_base; + + setup_indirect_pci(hose, + BAMBOO_PCI_CFGA_PLB32, + BAMBOO_PCI_CFGD_PLB32); + hose->set_cfg_type = 1; + + /* Zero config bars */ + for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) { + early_write_config_dword(hose, hose->first_busno, + PCI_FUNC(hose->first_busno), bar, + 0x00000000); + early_read_config_dword(hose, hose->first_busno, + PCI_FUNC(hose->first_busno), bar, + &bar_response); + } + + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = bamboo_map_irq; +} + +TODC_ALLOC(); + +static void __init +bamboo_early_serial_map(void) +{ + struct uart_port port; + + /* Setup ioremapped serial port access */ + memset(&port, 0, sizeof(port)); + port.membase = ioremap64(PPC440EP_UART0_ADDR, 8); + port.irq = 0; + port.uartclk = clocks.uart0; + port.regshift = 0; + port.iotype = SERIAL_IO_MEM; + port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + port.line = 0; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 0 failed\n"); + } + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(0, &port); +#endif + + port.membase = ioremap64(PPC440EP_UART1_ADDR, 8); + port.irq = 1; + port.uartclk = clocks.uart1; + port.line = 1; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 1 failed\n"); + } + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(1, &port); +#endif + + port.membase = ioremap64(PPC440EP_UART2_ADDR, 8); + port.irq = 3; + port.uartclk = clocks.uart2; + port.line = 2; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 2 failed\n"); + } + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(2, &port); +#endif + + port.membase = ioremap64(PPC440EP_UART3_ADDR, 8); + port.irq = 4; + port.uartclk = clocks.uart3; + port.line = 3; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 3 failed\n"); + } +} + +static void __init +bamboo_setup_arch(void) +{ + + bamboo_set_emacdata(); + + ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200); + ocp_sys_info.opb_bus_freq = clocks.opb; + + /* Setup TODC access */ + TODC_INIT(TODC_TYPE_DS1743, + 0, + 0, + ioremap64(BAMBOO_RTC_ADDR, BAMBOO_RTC_SIZE), + 8); + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + /* Setup PCI host bridge */ + bamboo_setup_hose(); + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + + bamboo_early_serial_map(); + + /* Identify the system */ + printk("IBM Bamboo port (MontaVista Software, Inc. (source@mvista.com))\n"); +} + +void __init platform_init(unsigned long r3, unsigned long r4, + unsigned long r5, unsigned long r6, unsigned long r7) +{ + parse_bootinfo(find_bootinfo()); + + /* + * If we were passed in a board information, copy it into the + * residual data area. + */ + if (r3) + __res = *(bd_t *)(r3 + KERNELBASE); + + + ibm44x_platform_init(); + + ppc_md.setup_arch = bamboo_setup_arch; + ppc_md.show_cpuinfo = bamboo_show_cpuinfo; + ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */ + + ppc_md.calibrate_decr = bamboo_calibrate_decr; + ppc_md.time_init = todc_time_init; + ppc_md.set_rtc_time = todc_set_rtc_time; + ppc_md.get_rtc_time = todc_get_rtc_time; + + ppc_md.nvram_read_val = todc_direct_read_val; + ppc_md.nvram_write_val = todc_direct_write_val; +#ifdef CONFIG_KGDB + ppc_md.early_serial_map = bamboo_early_serial_map; +#endif +} + diff --git a/arch/ppc/platforms/4xx/bamboo.h b/arch/ppc/platforms/4xx/bamboo.h new file mode 100644 index 000000000000..63d714504148 --- /dev/null +++ b/arch/ppc/platforms/4xx/bamboo.h @@ -0,0 +1,136 @@ +/* + * arch/ppc/platforms/bamboo.h + * + * Bamboo board definitions + * + * Wade Farnsworth <wfarnsworth@mvista.com> + * + * Copyright 2004 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_BAMBOO_H__ +#define __ASM_BAMBOO_H__ + +#include <linux/config.h> +#include <platforms/4xx/ibm440ep.h> + +/* F/W TLB mapping used in bootloader glue to reset EMAC */ +#define PPC44x_EMAC0_MR0 0x0EF600E00 + +/* Location of MAC addresses in PIBS image */ +#define PIBS_FLASH_BASE 0xfff00000 +#define PIBS_MAC_BASE (PIBS_FLASH_BASE+0xc0400) +#define PIBS_MAC_SIZE 0x200 +#define PIBS_MAC_OFFSET 0x100 + +/* Default clock rate */ +#define BAMBOO_TMRCLK 25000000 + +/* RTC/NVRAM location */ +#define BAMBOO_RTC_ADDR 0x080000000ULL +#define BAMBOO_RTC_SIZE 0x2000 + +/* FPGA Registers */ +#define BAMBOO_FPGA_ADDR 0x080002000ULL + +#define BAMBOO_FPGA_CONFIG2_REG_ADDR (BAMBOO_FPGA_ADDR + 0x1) +#define BAMBOO_FULL_DUPLEX_EN(x) (x & 0x08) +#define BAMBOO_FORCE_100Mbps(x) (x & 0x04) +#define BAMBOO_AUTONEGOTIATE(x) (x & 0x02) + +#define BAMBOO_FPGA_SETTING_REG_ADDR (BAMBOO_FPGA_ADDR + 0x3) +#define BAMBOO_BOOT_SMALL_FLASH(x) (!(x & 0x80)) +#define BAMBOO_LARGE_FLASH_EN(x) (!(x & 0x40)) +#define BAMBOO_BOOT_NAND_FLASH(x) (!(x & 0x20)) + +#define BAMBOO_FPGA_SELECTION1_REG_ADDR (BAMBOO_FPGA_ADDR + 0x4) +#define BAMBOO_SEL_MII(x) (x & 0x80) +#define BAMBOO_SEL_RMII(x) (x & 0x40) +#define BAMBOO_SEL_SMII(x) (x & 0x20) + +/* Flash */ +#define BAMBOO_SMALL_FLASH_LOW 0x087f00000ULL +#define BAMBOO_SMALL_FLASH_HIGH 0x0fff00000ULL +#define BAMBOO_SMALL_FLASH_SIZE 0x100000 +#define BAMBOO_LARGE_FLASH_LOW 0x087800000ULL +#define BAMBOO_LARGE_FLASH_HIGH1 0x0ff800000ULL +#define BAMBOO_LARGE_FLASH_HIGH2 0x0ffc00000ULL +#define BAMBOO_LARGE_FLASH_SIZE 0x400000 +#define BAMBOO_SRAM_LOW 0x087f00000ULL +#define BAMBOO_SRAM_HIGH1 0x0fff00000ULL +#define BAMBOO_SRAM_HIGH2 0x0ff800000ULL +#define BAMBOO_SRAM_SIZE 0x100000 +#define BAMBOO_NAND_FLASH_REG_ADDR 0x090000000ULL +#define BAMBOO_NAND_FLASH_REG_SIZE 0x2000 + +/* + * Serial port defines + */ +#define RS_TABLE_SIZE 4 + +#define UART0_IO_BASE 0xEF600300 +#define UART1_IO_BASE 0xEF600400 +#define UART2_IO_BASE 0xEF600500 +#define UART3_IO_BASE 0xEF600600 + +#define BASE_BAUD 33177600/3/16 +#define UART0_INT 0 +#define UART1_INT 1 +#define UART2_INT 3 +#define UART3_INT 4 + +#define STD_UART_OP(num) \ + { 0, BASE_BAUD, 0, UART##num##_INT, \ + (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ + iomem_base: UART##num##_IO_BASE, \ + io_type: SERIAL_IO_MEM}, + +#define SERIAL_PORT_DFNS \ + STD_UART_OP(0) \ + STD_UART_OP(1) \ + STD_UART_OP(2) \ + STD_UART_OP(3) + +/* PCI support */ +#define BAMBOO_PCI_CFGA_PLB32 0xeec00000 +#define BAMBOO_PCI_CFGD_PLB32 0xeec00004 + +#define BAMBOO_PCI_IO_BASE 0x00000000e8000000ULL +#define BAMBOO_PCI_IO_SIZE 0x00010000 +#define BAMBOO_PCI_MEM_OFFSET 0x00000000 +#define BAMBOO_PCI_PHY_MEM_BASE 0x00000000a0000000ULL + +#define BAMBOO_PCI_LOWER_IO 0x00000000 +#define BAMBOO_PCI_UPPER_IO 0x0000ffff +#define BAMBOO_PCI_LOWER_MEM 0xa0000000 +#define BAMBOO_PCI_UPPER_MEM 0xafffffff +#define BAMBOO_PCI_MEM_BASE 0xa0000000 + +#define BAMBOO_PCIL0_BASE 0x00000000ef400000ULL +#define BAMBOO_PCIL0_SIZE 0x40 + +#define BAMBOO_PCIL0_PMM0LA 0x000 +#define BAMBOO_PCIL0_PMM0MA 0x004 +#define BAMBOO_PCIL0_PMM0PCILA 0x008 +#define BAMBOO_PCIL0_PMM0PCIHA 0x00C +#define BAMBOO_PCIL0_PMM1LA 0x010 +#define BAMBOO_PCIL0_PMM1MA 0x014 +#define BAMBOO_PCIL0_PMM1PCILA 0x018 +#define BAMBOO_PCIL0_PMM1PCIHA 0x01C +#define BAMBOO_PCIL0_PMM2LA 0x020 +#define BAMBOO_PCIL0_PMM2MA 0x024 +#define BAMBOO_PCIL0_PMM2PCILA 0x028 +#define BAMBOO_PCIL0_PMM2PCIHA 0x02C +#define BAMBOO_PCIL0_PTM1MS 0x030 +#define BAMBOO_PCIL0_PTM1LA 0x034 +#define BAMBOO_PCIL0_PTM2MS 0x038 +#define BAMBOO_PCIL0_PTM2LA 0x03C + +#endif /* __ASM_BAMBOO_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c index cd11734ef7c5..509e69a095f0 100644 --- a/arch/ppc/platforms/4xx/ebony.c +++ b/arch/ppc/platforms/4xx/ebony.c @@ -7,7 +7,7 @@ * Copyright 2002-2005 MontaVista Software Inc. * * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * Copyright (c) 2003, 2004 Zultys Technologies + * Copyright (c) 2003-2005 Zultys Technologies * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -50,6 +50,7 @@ #include <asm/bootinfo.h> #include <asm/ppc4xx_pic.h> #include <asm/ppcboot.h> +#include <asm/tlbflush.h> #include <syslib/gen550.h> #include <syslib/ibm440gp_common.h> @@ -248,6 +249,9 @@ ebony_early_serial_map(void) #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) /* Configure debug serial access */ gen550_init(0, &port); + + /* Purge TLB entry added in head_44x.S for early serial access */ + _tlbie(UART0_IO_BASE); #endif port.membase = ioremap64(PPC440GP_UART1_ADDR, 8); diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h index 47c391c9174d..d08faa46a0ae 100644 --- a/arch/ppc/platforms/4xx/ebony.h +++ b/arch/ppc/platforms/4xx/ebony.h @@ -56,9 +56,18 @@ * Serial port defines */ -/* OpenBIOS defined UART mappings, used before early_serial_setup */ +#if defined(__BOOTER__) +/* OpenBIOS defined UART mappings, used by bootloader shim */ #define UART0_IO_BASE 0xE0000200 #define UART1_IO_BASE 0xE0000300 +#else +/* head_44x.S created UART mapping, used before early_serial_setup. + * We cannot use default OpenBIOS UART mappings because they + * don't work for configurations with more than 512M RAM. --ebs + */ +#define UART0_IO_BASE 0xF0000200 +#define UART1_IO_BASE 0xF0000300 +#endif /* external Epson SG-615P */ #define BASE_BAUD 691200 @@ -66,7 +75,7 @@ #define STD_UART_OP(num) \ { 0, BASE_BAUD, 0, UART##num##_INT, \ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: UART##num##_IO_BASE, \ + iomem_base: (void*)UART##num##_IO_BASE, \ io_type: SERIAL_IO_MEM}, #define SERIAL_PORT_DFNS \ diff --git a/arch/ppc/platforms/4xx/ibm440ep.c b/arch/ppc/platforms/4xx/ibm440ep.c new file mode 100644 index 000000000000..284da01f1ffd --- /dev/null +++ b/arch/ppc/platforms/4xx/ibm440ep.c @@ -0,0 +1,220 @@ +/* + * arch/ppc/platforms/4xx/ibm440ep.c + * + * PPC440EP I/O descriptions + * + * Wade Farnsworth <wfarnsworth@mvista.com> + * Copyright 2004 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/init.h> +#include <linux/module.h> +#include <platforms/4xx/ibm440ep.h> +#include <asm/ocp.h> +#include <asm/ppc4xx_pic.h> + +static struct ocp_func_emac_data ibm440ep_emac0_def = { + .rgmii_idx = -1, /* No RGMII */ + .rgmii_mux = -1, /* No RGMII */ + .zmii_idx = 0, /* ZMII device index */ + .zmii_mux = 0, /* ZMII input of this EMAC */ + .mal_idx = 0, /* MAL device index */ + .mal_rx_chan = 0, /* MAL rx channel number */ + .mal_tx_chan = 0, /* MAL tx channel number */ + .wol_irq = 61, /* WOL interrupt number */ + .mdio_idx = -1, /* No shared MDIO */ + .tah_idx = -1, /* No TAH */ +}; + +static struct ocp_func_emac_data ibm440ep_emac1_def = { + .rgmii_idx = -1, /* No RGMII */ + .rgmii_mux = -1, /* No RGMII */ + .zmii_idx = 0, /* ZMII device index */ + .zmii_mux = 1, /* ZMII input of this EMAC */ + .mal_idx = 0, /* MAL device index */ + .mal_rx_chan = 1, /* MAL rx channel number */ + .mal_tx_chan = 2, /* MAL tx channel number */ + .wol_irq = 63, /* WOL interrupt number */ + .mdio_idx = -1, /* No shared MDIO */ + .tah_idx = -1, /* No TAH */ +}; +OCP_SYSFS_EMAC_DATA() + +static struct ocp_func_mal_data ibm440ep_mal0_def = { + .num_tx_chans = 4, /* Number of TX channels */ + .num_rx_chans = 2, /* Number of RX channels */ + .txeob_irq = 10, /* TX End Of Buffer IRQ */ + .rxeob_irq = 11, /* RX End Of Buffer IRQ */ + .txde_irq = 33, /* TX Descriptor Error IRQ */ + .rxde_irq = 34, /* RX Descriptor Error IRQ */ + .serr_irq = 32, /* MAL System Error IRQ */ +}; +OCP_SYSFS_MAL_DATA() + +static struct ocp_func_iic_data ibm440ep_iic0_def = { + .fast_mode = 0, /* Use standad mode (100Khz) */ +}; + +static struct ocp_func_iic_data ibm440ep_iic1_def = { + .fast_mode = 0, /* Use standad mode (100Khz) */ +}; +OCP_SYSFS_IIC_DATA() + +struct ocp_def core_ocp[] = { + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_OPB, + .index = 0, + .paddr = 0x0EF600000ULL, + .irq = OCP_IRQ_NA, + .pm = OCP_CPM_NA, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 0, + .paddr = PPC440EP_UART0_ADDR, + .irq = UART0_INT, + .pm = IBM_CPM_UART0, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 1, + .paddr = PPC440EP_UART1_ADDR, + .irq = UART1_INT, + .pm = IBM_CPM_UART1, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 2, + .paddr = PPC440EP_UART2_ADDR, + .irq = UART2_INT, + .pm = IBM_CPM_UART2, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 3, + .paddr = PPC440EP_UART3_ADDR, + .irq = UART3_INT, + .pm = IBM_CPM_UART3, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_IIC, + .index = 0, + .paddr = 0x0EF600700ULL, + .irq = 2, + .pm = IBM_CPM_IIC0, + .additions = &ibm440ep_iic0_def, + .show = &ocp_show_iic_data + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_IIC, + .index = 1, + .paddr = 0x0EF600800ULL, + .irq = 7, + .pm = IBM_CPM_IIC1, + .additions = &ibm440ep_iic1_def, + .show = &ocp_show_iic_data + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_GPIO, + .index = 0, + .paddr = 0x0EF600B00ULL, + .irq = OCP_IRQ_NA, + .pm = IBM_CPM_GPIO0, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_GPIO, + .index = 1, + .paddr = 0x0EF600C00ULL, + .irq = OCP_IRQ_NA, + .pm = OCP_CPM_NA, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_MAL, + .paddr = OCP_PADDR_NA, + .irq = OCP_IRQ_NA, + .pm = OCP_CPM_NA, + .additions = &ibm440ep_mal0_def, + .show = &ocp_show_mal_data, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_EMAC, + .index = 0, + .paddr = 0x0EF600E00ULL, + .irq = 60, + .pm = OCP_CPM_NA, + .additions = &ibm440ep_emac0_def, + .show = &ocp_show_emac_data, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_EMAC, + .index = 1, + .paddr = 0x0EF600F00ULL, + .irq = 62, + .pm = OCP_CPM_NA, + .additions = &ibm440ep_emac1_def, + .show = &ocp_show_emac_data, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_ZMII, + .paddr = 0x0EF600D00ULL, + .irq = OCP_IRQ_NA, + .pm = OCP_CPM_NA, + }, + { .vendor = OCP_VENDOR_INVALID + } +}; + +/* Polarity and triggering settings for internal interrupt sources */ +struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = { + { .polarity = 0xffbffe03, + .triggering = 0xfffffe00, + .ext_irq_mask = 0x000001fc, /* IRQ0 - IRQ6 */ + }, + { .polarity = 0xffffc6ef, + .triggering = 0xffffc7ff, + .ext_irq_mask = 0x00003800, /* IRQ7 - IRQ9 */ + }, +}; + +static struct resource usb_gadget_resources[] = { + [0] = { + .start = 0x050000100ULL, + .end = 0x05000017FULL, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 55, + .end = 55, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 dma_mask = 0xffffffffULL; + +static struct platform_device usb_gadget_device = { + .name = "musbhsfc", + .id = 0, + .num_resources = ARRAY_SIZE(usb_gadget_resources), + .resource = usb_gadget_resources, + .dev = { + .dma_mask = &dma_mask, + .coherent_dma_mask = 0xffffffffULL, + } +}; + +static struct platform_device *ibm440ep_devs[] __initdata = { + &usb_gadget_device, +}; + +static int __init +ibm440ep_platform_add_devices(void) +{ + return platform_add_devices(ibm440ep_devs, ARRAY_SIZE(ibm440ep_devs)); +} +arch_initcall(ibm440ep_platform_add_devices); + diff --git a/arch/ppc/platforms/4xx/ibm440ep.h b/arch/ppc/platforms/4xx/ibm440ep.h new file mode 100644 index 000000000000..97c80b8e3e10 --- /dev/null +++ b/arch/ppc/platforms/4xx/ibm440ep.h @@ -0,0 +1,76 @@ +/* + * arch/ppc/platforms/4xx/ibm440ep.h + * + * PPC440EP definitions + * + * Wade Farnsworth <wfarnsworth@mvista.com> + * + * Copyright 2002 Roland Dreier + * Copyright 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifdef __KERNEL__ +#ifndef __PPC_PLATFORMS_IBM440EP_H +#define __PPC_PLATFORMS_IBM440EP_H + +#include <linux/config.h> +#include <asm/ibm44x.h> + +/* UART */ +#define PPC440EP_UART0_ADDR 0x0EF600300 +#define PPC440EP_UART1_ADDR 0x0EF600400 +#define PPC440EP_UART2_ADDR 0x0EF600500 +#define PPC440EP_UART3_ADDR 0x0EF600600 +#define UART0_INT 0 +#define UART1_INT 1 +#define UART2_INT 3 +#define UART3_INT 4 + +/* Clock and Power Management */ +#define IBM_CPM_IIC0 0x80000000 /* IIC interface */ +#define IBM_CPM_IIC1 0x40000000 /* IIC interface */ +#define IBM_CPM_PCI 0x20000000 /* PCI bridge */ +#define IBM_CPM_USB1H 0x08000000 /* USB 1.1 Host */ +#define IBM_CPM_FPU 0x04000000 /* floating point unit */ +#define IBM_CPM_CPU 0x02000000 /* processor core */ +#define IBM_CPM_DMA 0x01000000 /* DMA controller */ +#define IBM_CPM_BGO 0x00800000 /* PLB to OPB bus arbiter */ +#define IBM_CPM_BGI 0x00400000 /* OPB to PLB bridge */ +#define IBM_CPM_EBC 0x00200000 /* External Bus Controller */ +#define IBM_CPM_EBM 0x00100000 /* Ext Bus Master Interface */ +#define IBM_CPM_DMC 0x00080000 /* SDRAM peripheral controller */ +#define IBM_CPM_PLB4 0x00040000 /* PLB4 bus arbiter */ +#define IBM_CPM_PLB4x3 0x00020000 /* PLB4 to PLB3 bridge controller */ +#define IBM_CPM_PLB3x4 0x00010000 /* PLB3 to PLB4 bridge controller */ +#define IBM_CPM_PLB3 0x00008000 /* PLB3 bus arbiter */ +#define IBM_CPM_PPM 0x00002000 /* PLB Performance Monitor */ +#define IBM_CPM_UIC1 0x00001000 /* Universal Interrupt Controller */ +#define IBM_CPM_GPIO0 0x00000800 /* General Purpose IO (??) */ +#define IBM_CPM_GPT 0x00000400 /* General Purpose Timers */ +#define IBM_CPM_UART0 0x00000200 /* serial port 0 */ +#define IBM_CPM_UART1 0x00000100 /* serial port 1 */ +#define IBM_CPM_UIC0 0x00000080 /* Universal Interrupt Controller */ +#define IBM_CPM_TMRCLK 0x00000040 /* CPU timers */ +#define IBM_CPM_EMAC0 0x00000020 /* ethernet port 0 */ +#define IBM_CPM_EMAC1 0x00000010 /* ethernet port 1 */ +#define IBM_CPM_UART2 0x00000008 /* serial port 2 */ +#define IBM_CPM_UART3 0x00000004 /* serial port 3 */ +#define IBM_CPM_USB2D 0x00000002 /* USB 2.0 Device */ +#define IBM_CPM_USB2H 0x00000001 /* USB 2.0 Host */ + +#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU \ + | IBM_CPM_EBC | IBM_CPM_BGO | IBM_CPM_FPU \ + | IBM_CPM_EBM | IBM_CPM_PLB4 | IBM_CPM_3x4 \ + | IBM_CPM_PLB3 | IBM_CPM_PLB4x3 \ + | IBM_CPM_EMAC0 | IBM_CPM_TMRCLK \ + | IBM_CPM_DMA | IBM_CPM_PCI | IBM_CPM_EMAC1) + + +#endif /* __PPC_PLATFORMS_IBM440EP_H */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/ibm440sp.c b/arch/ppc/platforms/4xx/ibm440sp.c index a203efb47aba..fa3e003a0db9 100644 --- a/arch/ppc/platforms/4xx/ibm440sp.c +++ b/arch/ppc/platforms/4xx/ibm440sp.c @@ -36,8 +36,8 @@ static struct ocp_func_emac_data ibm440sp_emac0_def = { OCP_SYSFS_EMAC_DATA() static struct ocp_func_mal_data ibm440sp_mal0_def = { - .num_tx_chans = 4, /* Number of TX channels */ - .num_rx_chans = 4, /* Number of RX channels */ + .num_tx_chans = 1, /* Number of TX channels */ + .num_rx_chans = 1, /* Number of RX channels */ .txeob_irq = 38, /* TX End Of Buffer IRQ */ .rxeob_irq = 39, /* RX End Of Buffer IRQ */ .txde_irq = 34, /* TX Descriptor Error IRQ */ diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index 5f82a6bc7046..8fc34a344769 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -48,6 +48,7 @@ #include <asm/bootinfo.h> #include <asm/ppc4xx_pic.h> #include <asm/ppcboot.h> +#include <asm/tlbflush.h> #include <syslib/gen550.h> #include <syslib/ibm440gx_common.h> @@ -266,6 +267,9 @@ ocotea_early_serial_map(void) #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) /* Configure debug serial access */ gen550_init(0, &port); + + /* Purge TLB entry added in head_44x.S for early serial access */ + _tlbie(UART0_IO_BASE); #endif port.membase = ioremap64(PPC440GX_UART1_ADDR, 8); diff --git a/arch/ppc/platforms/4xx/ocotea.h b/arch/ppc/platforms/4xx/ocotea.h index 202dc8251190..33251153ac5f 100644 --- a/arch/ppc/platforms/4xx/ocotea.h +++ b/arch/ppc/platforms/4xx/ocotea.h @@ -55,15 +55,24 @@ */ #define RS_TABLE_SIZE 2 -/* OpenBIOS defined UART mappings, used before early_serial_setup */ +#if defined(__BOOTER__) +/* OpenBIOS defined UART mappings, used by bootloader shim */ #define UART0_IO_BASE 0xE0000200 #define UART1_IO_BASE 0xE0000300 +#else +/* head_44x.S created UART mapping, used before early_serial_setup. + * We cannot use default OpenBIOS UART mappings because they + * don't work for configurations with more than 512M RAM. --ebs + */ +#define UART0_IO_BASE 0xF0000200 +#define UART1_IO_BASE 0xF0000300 +#endif #define BASE_BAUD 11059200/16 #define STD_UART_OP(num) \ { 0, BASE_BAUD, 0, UART##num##_INT, \ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: UART##num##_IO_BASE, \ + iomem_base: (void*)UART##num##_IO_BASE, \ io_type: SERIAL_IO_MEM}, #define SERIAL_PORT_DFNS \ diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index 86ca5cf81263..ddd04d4c1ea9 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -94,20 +94,24 @@ mpc834x_sys_setup_arch(void) /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC1); - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC83xx_IRQ_EXT1; - pdata->phyid = 0; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC83xx_IRQ_EXT1; + pdata->phyid = 0; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + } pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC2); - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC83xx_IRQ_EXT2; - pdata->phyid = 1; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC83xx_IRQ_EXT2; + pdata->phyid = 1; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + } #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) @@ -185,6 +189,26 @@ mpc834x_sys_init_IRQ(void) ipic_set_default_priority(); } +#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) +extern ulong ds1374_get_rtc_time(void); +extern int ds1374_set_rtc_time(ulong); + +static int __init +mpc834x_rtc_hookup(void) +{ + struct timespec tv; + + ppc_md.get_rtc_time = ds1374_get_rtc_time; + ppc_md.set_rtc_time = ds1374_set_rtc_time; + + tv.tv_nsec = 0; + tv.tv_sec = (ppc_md.get_rtc_time)(); + do_settimeofday(&tv); + + return 0; +} +late_initcall(mpc834x_rtc_hookup); +#endif static __inline__ void mpc834x_sys_set_bat(void) { diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c index a2ed611cd936..f761fdf160db 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.c +++ b/arch/ppc/platforms/85xx/mpc8540_ads.c @@ -92,28 +92,34 @@ mpc8540ads_setup_arch(void) /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC85xx_IRQ_EXT5; - pdata->phyid = 0; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 0; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + } pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC85xx_IRQ_EXT5; - pdata->phyid = 1; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 1; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + } pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC); - pdata->board_flags = 0; - pdata->interruptPHY = MPC85xx_IRQ_EXT5; - pdata->phyid = 3; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6); + if (pdata) { + pdata->board_flags = 0; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 3; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6); + } #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c index d87dfd5ce0a2..f2748c88665a 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.c +++ b/arch/ppc/platforms/85xx/mpc8560_ads.c @@ -56,7 +56,6 @@ #include <syslib/ppc85xx_common.h> #include <syslib/ppc85xx_setup.h> -extern void cpm2_reset(void); /* ************************************************************************ * @@ -90,20 +89,24 @@ mpc8560ads_setup_arch(void) /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC85xx_IRQ_EXT5; - pdata->phyid = 0; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 0; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + } pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC85xx_IRQ_EXT5; - pdata->phyid = 1; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 1; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + } #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index 203b2ca61df8..6267b294f704 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -49,7 +49,7 @@ #include <asm/mpc85xx.h> #include <asm/irq.h> #include <asm/immap_85xx.h> -#include <asm/immap_cpm2.h> +#include <asm/cpm2.h> #include <asm/ppc_sys.h> #include <asm/kgdb.h> @@ -149,6 +149,7 @@ void __init mpc85xx_cds_init_IRQ(void) { bd_t *binfo = (bd_t *) __res; + int i; /* Determine the Physical Address of the OpenPIC regs */ phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c index 3dbdd73618eb..165df94d4aa6 100644 --- a/arch/ppc/platforms/85xx/sbc8560.c +++ b/arch/ppc/platforms/85xx/sbc8560.c @@ -129,20 +129,24 @@ sbc8560_setup_arch(void) /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC85xx_IRQ_EXT6; - pdata->phyid = 25; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT6; + pdata->phyid = 25; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + } pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC85xx_IRQ_EXT7; - pdata->phyid = 26; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT7; + pdata->phyid = 26; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + } #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c index 9455bb6b45e9..c99b365d6110 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.c +++ b/arch/ppc/platforms/85xx/stx_gp3.c @@ -52,14 +52,13 @@ #include <asm/mpc85xx.h> #include <asm/irq.h> #include <asm/immap_85xx.h> -#include <asm/immap_cpm2.h> +#include <asm/cpm2.h> #include <asm/mpc85xx.h> #include <asm/ppc_sys.h> #include <syslib/cpm2_pic.h> #include <syslib/ppc85xx_common.h> -extern void cpm2_reset(void); unsigned char __res[sizeof(bd_t)]; @@ -122,19 +121,23 @@ gp3_setup_arch(void) /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); -/* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */ - pdata->interruptPHY = MPC85xx_IRQ_EXT5; - pdata->phyid = 2; - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + if (pdata) { + /* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */ + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 2; + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + } pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); -/* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */ - pdata->interruptPHY = MPC85xx_IRQ_EXT5; - pdata->phyid = 4; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + if (pdata) { + /* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */ + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 4; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + } #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) diff --git a/arch/ppc/platforms/chrp_pci.c b/arch/ppc/platforms/chrp_pci.c index 7d0ee308f662..7d3fbb5c5db2 100644 --- a/arch/ppc/platforms/chrp_pci.c +++ b/arch/ppc/platforms/chrp_pci.c @@ -9,7 +9,6 @@ #include <linux/string.h> #include <linux/init.h> #include <linux/ide.h> -#include <linux/bootmem.h> #include <asm/io.h> #include <asm/pgtable.h> diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h index 632b8178ce66..b60c56450b67 100644 --- a/arch/ppc/platforms/fads.h +++ b/arch/ppc/platforms/fads.h @@ -3,7 +3,18 @@ * the Motorola 860T FADS board. Copied from the MBX stuff. * * Copyright (c) 1998 Dan Malek (dmalek@jlc.net) + * + * Added MPC86XADS support. + * The MPC86xADS manual says the board "is compatible with the MPC8xxFADS + * for SW point of view". This is 99% correct. + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * 2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. */ + #ifdef __KERNEL__ #ifndef __ASM_FADS_H__ #define __ASM_FADS_H__ @@ -12,18 +23,45 @@ #include <asm/ppcboot.h> +#if defined(CONFIG_MPC86XADS) + +/* U-Boot maps BCSR to 0xff080000 */ +#define BCSR_ADDR ((uint)0xff080000) + +/* MPC86XADS has one more CPLD and an additional BCSR. + */ +#define CFG_PHYDEV_ADDR ((uint)0xff0a0000) +#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) + +#define BCSR5_T1_RST 0x10 +#define BCSR5_ATM155_RST 0x08 +#define BCSR5_ATM25_RST 0x04 +#define BCSR5_MII1_EN 0x02 +#define BCSR5_MII1_RST 0x01 + +/* There is no PHY link change interrupt */ +#define PHY_INTERRUPT (-1) + +#else /* FADS */ + /* Memory map is configured by the PROM startup. * I tried to follow the FADS manual, although the startup PROM * dictates this and we simply have to move some of the physical * addresses for Linux. */ #define BCSR_ADDR ((uint)0xff010000) + +/* PHY link change interrupt */ +#define PHY_INTERRUPT SIU_IRQ2 + +#endif /* CONFIG_MPC86XADS */ + #define BCSR_SIZE ((uint)(64 * 1024)) -#define BCSR0 ((uint)0xff010000) -#define BCSR1 ((uint)0xff010004) -#define BCSR2 ((uint)0xff010008) -#define BCSR3 ((uint)0xff01000c) -#define BCSR4 ((uint)0xff010010) +#define BCSR0 ((uint)(BCSR_ADDR + 0x00)) +#define BCSR1 ((uint)(BCSR_ADDR + 0x04)) +#define BCSR2 ((uint)(BCSR_ADDR + 0x08)) +#define BCSR3 ((uint)(BCSR_ADDR + 0x0c)) +#define BCSR4 ((uint)(BCSR_ADDR + 0x10)) #define IMAP_ADDR ((uint)0xff000000) #define IMAP_SIZE ((uint)(64 * 1024)) @@ -34,8 +72,17 @@ /* Bits of interest in the BCSRs. */ #define BCSR1_ETHEN ((uint)0x20000000) +#define BCSR1_IRDAEN ((uint)0x10000000) #define BCSR1_RS232EN_1 ((uint)0x01000000) +#define BCSR1_PCCEN ((uint)0x00800000) +#define BCSR1_PCCVCC0 ((uint)0x00400000) +#define BCSR1_PCCVPP0 ((uint)0x00200000) +#define BCSR1_PCCVPP1 ((uint)0x00100000) +#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) #define BCSR1_RS232EN_2 ((uint)0x00040000) +#define BCSR1_PCCVCC1 ((uint)0x00010000) +#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) + #define BCSR4_ETHLOOP ((uint)0x80000000) /* EEST Loopback */ #define BCSR4_EEFDX ((uint)0x40000000) /* EEST FDX enable */ #define BCSR4_FETH_EN ((uint)0x08000000) /* PHY enable */ @@ -44,14 +91,64 @@ #define BCSR4_FETHFDE ((uint)0x02000000) /* PHY FDX advertise */ #define BCSR4_FETHRST ((uint)0x00200000) /* PHY Reset */ +/* IO_BASE definition for pcmcia. + */ +#define _IO_BASE 0x80000000 +#define _IO_BASE_SIZE 0x1000 + +#ifdef CONFIG_IDE +#define MAX_HWIFS 1 +#endif + /* Interrupt level assignments. */ #define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */ -#define PHY_INTERRUPT SIU_IRQ2 /* PHY link change interrupt */ /* We don't use the 8259. */ #define NR_8259_INTS 0 +/* CPM Ethernet through SCC1 or SCC2 */ + +#ifdef CONFIG_SCC1_ENET /* Probably 860 variant */ +/* Bits in parallel I/O port registers that have to be set/cleared + * to configure the pins for SCC1 use. + * TCLK - CLK1, RCLK - CLK2. + */ +#define PA_ENET_RXD ((ushort)0x0001) +#define PA_ENET_TXD ((ushort)0x0002) +#define PA_ENET_TCLK ((ushort)0x0100) +#define PA_ENET_RCLK ((ushort)0x0200) +#define PB_ENET_TENA ((uint)0x00001000) +#define PC_ENET_CLSN ((ushort)0x0010) +#define PC_ENET_RENA ((ushort)0x0020) + +/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to + * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. + */ +#define SICR_ENET_MASK ((uint)0x000000ff) +#define SICR_ENET_CLKRT ((uint)0x0000002c) +#endif /* CONFIG_SCC1_ENET */ + +#ifdef CONFIG_SCC2_ENET /* Probably 823/850 variant */ +/* Bits in parallel I/O port registers that have to be set/cleared + * to configure the pins for SCC1 use. + * TCLK - CLK1, RCLK - CLK2. + */ +#define PA_ENET_RXD ((ushort)0x0004) +#define PA_ENET_TXD ((ushort)0x0008) +#define PA_ENET_TCLK ((ushort)0x0400) +#define PA_ENET_RCLK ((ushort)0x0200) +#define PB_ENET_TENA ((uint)0x00002000) +#define PC_ENET_CLSN ((ushort)0x0040) +#define PC_ENET_RENA ((ushort)0x0080) + +/* Control bits in the SICR to route TCLK and RCLK to + * SCC2. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. + */ +#define SICR_ENET_MASK ((uint)0x0000ff00) +#define SICR_ENET_CLKRT ((uint)0x00002e00) +#endif /* CONFIG_SCC2_ENET */ + #endif /* __ASM_FADS_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c index eda922ac3167..169dbf6534b9 100644 --- a/arch/ppc/platforms/katana.c +++ b/arch/ppc/platforms/katana.c @@ -27,12 +27,12 @@ #include <linux/root_dev.h> #include <linux/delay.h> #include <linux/seq_file.h> -#include <linux/bootmem.h> #include <linux/mtd/physmap.h> #include <linux/mv643xx.h> #ifdef CONFIG_BOOTIMG #include <linux/bootimg.h> #endif +#include <asm/io.h> #include <asm/page.h> #include <asm/time.h> #include <asm/smp.h> diff --git a/arch/ppc/platforms/mpc885ads.h b/arch/ppc/platforms/mpc885ads.h new file mode 100644 index 000000000000..eb386635b0fd --- /dev/null +++ b/arch/ppc/platforms/mpc885ads.h @@ -0,0 +1,92 @@ +/* + * A collection of structures, addresses, and values associated with + * the Freescale MPC885ADS board. + * Copied from the FADS stuff. + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_MPC885ADS_H__ +#define __ASM_MPC885ADS_H__ + +#include <linux/config.h> + +#include <asm/ppcboot.h> + +/* U-Boot maps BCSR to 0xff080000 */ +#define BCSR_ADDR ((uint)0xff080000) +#define BCSR_SIZE ((uint)32) +#define BCSR0 ((uint)(BCSR_ADDR + 0x00)) +#define BCSR1 ((uint)(BCSR_ADDR + 0x04)) +#define BCSR2 ((uint)(BCSR_ADDR + 0x08)) +#define BCSR3 ((uint)(BCSR_ADDR + 0x0c)) +#define BCSR4 ((uint)(BCSR_ADDR + 0x10)) + +#define CFG_PHYDEV_ADDR ((uint)0xff0a0000) +#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) + +#define IMAP_ADDR ((uint)0xff000000) +#define IMAP_SIZE ((uint)(64 * 1024)) + +#define PCMCIA_MEM_ADDR ((uint)0xff020000) +#define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) + +/* Bits of interest in the BCSRs. + */ +#define BCSR1_ETHEN ((uint)0x20000000) +#define BCSR1_IRDAEN ((uint)0x10000000) +#define BCSR1_RS232EN_1 ((uint)0x01000000) +#define BCSR1_PCCEN ((uint)0x00800000) +#define BCSR1_PCCVCC0 ((uint)0x00400000) +#define BCSR1_PCCVPP0 ((uint)0x00200000) +#define BCSR1_PCCVPP1 ((uint)0x00100000) +#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) +#define BCSR1_RS232EN_2 ((uint)0x00040000) +#define BCSR1_PCCVCC1 ((uint)0x00010000) +#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) + +#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/ +#define BCSR4_USB_LO_SPD ((uint)0x04000000) +#define BCSR4_USB_VCC ((uint)0x02000000) +#define BCSR4_USB_FULL_SPD ((uint)0x00040000) +#define BCSR4_USB_EN ((uint)0x00020000) + +#define BCSR5_MII2_EN 0x40 +#define BCSR5_MII2_RST 0x20 +#define BCSR5_T1_RST 0x10 +#define BCSR5_ATM155_RST 0x08 +#define BCSR5_ATM25_RST 0x04 +#define BCSR5_MII1_EN 0x02 +#define BCSR5_MII1_RST 0x01 + +/* Interrupt level assignments */ +#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */ +#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */ +#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */ +#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */ + +/* We don't use the 8259 */ +#define NR_8259_INTS 0 + +/* CPM Ethernet through SCC3 */ +#define PA_ENET_RXD ((ushort)0x0040) +#define PA_ENET_TXD ((ushort)0x0080) +#define PE_ENET_TCLK ((uint)0x00004000) +#define PE_ENET_RCLK ((uint)0x00008000) +#define PE_ENET_TENA ((uint)0x00000010) +#define PC_ENET_CLSN ((ushort)0x0400) +#define PC_ENET_RENA ((ushort)0x0800) + +/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to + * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */ +#define SICR_ENET_MASK ((uint)0x00ff0000) +#define SICR_ENET_CLKRT ((uint)0x002c0000) + +#endif /* __ASM_MPC885ADS_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c index 5fdd4f607a40..c0605244edda 100644 --- a/arch/ppc/platforms/pmac_cpufreq.c +++ b/arch/ppc/platforms/pmac_cpufreq.c @@ -452,7 +452,7 @@ static u32 __pmac read_gpio(struct device_node *np) return offset; } -static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, u32 state) +static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg) { /* Ok, this could be made a bit smarter, but let's be robust for now. We * always force a speed change to high speed before sleep, to make sure diff --git a/arch/ppc/platforms/pmac_pci.c b/arch/ppc/platforms/pmac_pci.c index f6ff51924061..719fb49fe2bc 100644 --- a/arch/ppc/platforms/pmac_pci.c +++ b/arch/ppc/platforms/pmac_pci.c @@ -17,7 +17,6 @@ #include <linux/delay.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/bootmem.h> #include <asm/sections.h> #include <asm/io.h> diff --git a/arch/ppc/platforms/pmac_setup.c b/arch/ppc/platforms/pmac_setup.c index 4d324b630f4f..b392b9a15987 100644 --- a/arch/ppc/platforms/pmac_setup.c +++ b/arch/ppc/platforms/pmac_setup.c @@ -113,7 +113,7 @@ extern int pmac_newworld; extern void zs_kgdb_hook(int tty_num); static void ohare_init(void); #ifdef CONFIG_BOOTX_TEXT -void pmac_progress(char *s, unsigned short hex); +static void pmac_progress(char *s, unsigned short hex); #endif sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN; @@ -123,7 +123,7 @@ extern struct smp_ops_t psurge_smp_ops; extern struct smp_ops_t core99_smp_ops; #endif /* CONFIG_SMP */ -int __pmac +static int __pmac pmac_show_cpuinfo(struct seq_file *m) { struct device_node *np; @@ -227,7 +227,7 @@ pmac_show_cpuinfo(struct seq_file *m) return 0; } -int __openfirmware +static int __openfirmware pmac_show_percpuinfo(struct seq_file *m, int i) { #ifdef CONFIG_CPU_FREQ_PMAC @@ -415,7 +415,7 @@ find_ide_boot(void) } #endif /* CONFIG_BLK_DEV_IDE && CONFIG_BLK_DEV_IDE_PMAC */ -void __init +static void __init find_boot_device(void) { #if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC) @@ -512,7 +512,7 @@ note_bootable_part(dev_t dev, int part, int goodness) } } -void __pmac +static void __pmac pmac_restart(char *cmd) { #ifdef CONFIG_ADB_CUDA @@ -537,7 +537,7 @@ pmac_restart(char *cmd) } } -void __pmac +static void __pmac pmac_power_off(void) { #ifdef CONFIG_ADB_CUDA @@ -562,7 +562,7 @@ pmac_power_off(void) } } -void __pmac +static void __pmac pmac_halt(void) { pmac_power_off(); @@ -700,7 +700,7 @@ pmac_init(unsigned long r3, unsigned long r4, unsigned long r5, } #ifdef CONFIG_BOOTX_TEXT -void __init +static void __init pmac_progress(char *s, unsigned short hex) { if (boot_text_mapped) { diff --git a/arch/ppc/platforms/pmac_sleep.S b/arch/ppc/platforms/pmac_sleep.S index f459ade1bd63..016a74649155 100644 --- a/arch/ppc/platforms/pmac_sleep.S +++ b/arch/ppc/platforms/pmac_sleep.S @@ -46,7 +46,7 @@ .section .text .align 5 -#if defined(CONFIG_PMAC_PBOOK) || defined(CONFIG_CPU_FREQ_PMAC) +#if defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ_PMAC) /* This gets called by via-pmu.c late during the sleep process. * The PMU was already send the sleep command and will shut us down @@ -382,7 +382,7 @@ turn_on_mmu: isync rfi -#endif /* defined(CONFIG_PMAC_PBOOK) || defined(CONFIG_CPU_FREQ) */ +#endif /* defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ) */ .section .data .balign L1_CACHE_LINE_SIZE diff --git a/arch/ppc/platforms/pmac_time.c b/arch/ppc/platforms/pmac_time.c index de60ccc7db9f..778ce4fec368 100644 --- a/arch/ppc/platforms/pmac_time.c +++ b/arch/ppc/platforms/pmac_time.c @@ -206,7 +206,7 @@ via_calibrate_decr(void) return 1; } -#ifdef CONFIG_PMAC_PBOOK +#ifdef CONFIG_PM /* * Reset the time after a sleep. */ @@ -238,7 +238,7 @@ time_sleep_notify(struct pmu_sleep_notifier *self, int when) static struct pmu_sleep_notifier time_sleep_notifier __pmacdata = { time_sleep_notify, SLEEP_LEVEL_MISC, }; -#endif /* CONFIG_PMAC_PBOOK */ +#endif /* CONFIG_PM */ /* * Query the OF and get the decr frequency. @@ -251,9 +251,9 @@ pmac_calibrate_decr(void) struct device_node *cpu; unsigned int freq, *fp; -#ifdef CONFIG_PMAC_PBOOK +#ifdef CONFIG_PM pmu_register_sleep_notifier(&time_sleep_notifier); -#endif /* CONFIG_PMAC_PBOOK */ +#endif /* CONFIG_PM */ /* We assume MacRISC2 machines have correct device-tree * calibration. That's better since the VIA itself seems diff --git a/arch/ppc/platforms/prpmc750.c b/arch/ppc/platforms/prpmc750.c index c894e1ab5934..24ae1caafc61 100644 --- a/arch/ppc/platforms/prpmc750.c +++ b/arch/ppc/platforms/prpmc750.c @@ -29,6 +29,7 @@ #include <linux/ide.h> #include <linux/root_dev.h> #include <linux/slab.h> +#include <linux/serial_reg.h> #include <asm/byteorder.h> #include <asm/system.h> diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c index 70e58f43f2b8..21e31346b12b 100644 --- a/arch/ppc/platforms/sandpoint.c +++ b/arch/ppc/platforms/sandpoint.c @@ -311,19 +311,23 @@ sandpoint_setup_arch(void) { bd_t *bp = (bd_t *)__res; struct plat_serial8250_port *pdata; - pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_DUART); + pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART0); if (pdata) { pdata[0].uartclk = bp->bi_busfreq; - pdata[0].membase = ioremap(pdata[0].mapbase, 0x100); + } - /* this disables the 2nd serial port on the DUART - * since the sandpoint does not have it connected */ - pdata[1].uartclk = 0; - pdata[1].irq = 0; - pdata[1].mapbase = 0; +#ifdef CONFIG_SANDPOINT_ENABLE_UART1 + pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART1); + if (pdata) + { + pdata[0].uartclk = bp->bi_busfreq; } +#else + ppc_sys_device_remove(MPC10X_UART1); +#endif + } printk(KERN_INFO "Motorola SPS Sandpoint Test Platform\n"); printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n"); diff --git a/arch/ppc/platforms/tqm8260_setup.c b/arch/ppc/platforms/tqm8260_setup.c index a8880bfc034b..3409139330b1 100644 --- a/arch/ppc/platforms/tqm8260_setup.c +++ b/arch/ppc/platforms/tqm8260_setup.c @@ -16,8 +16,8 @@ #include <linux/init.h> -#include <asm/immap_cpm2.h> #include <asm/mpc8260.h> +#include <asm/cpm2.h> #include <asm/machdep.h> static int diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index dec5bf4f6879..220a65ab0a51 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_PPCBUG_NVRAM) += prep_nvram.o obj-$(CONFIG_PPC_OCP) += ocp.o obj-$(CONFIG_IBM_OCP) += ibm_ocp.o obj-$(CONFIG_44x) += ibm44x_common.o +obj-$(CONFIG_440EP) += ibm440gx_common.o obj-$(CONFIG_440GP) += ibm440gp_common.o obj-$(CONFIG_440GX) += ibm440gx_common.o obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o @@ -44,6 +45,7 @@ obj-$(CONFIG_PPC_CHRP) += open_pic.o indirect_pci.o i8259.o obj-$(CONFIG_PPC_PREP) += open_pic.o indirect_pci.o i8259.o todc_time.o obj-$(CONFIG_ADIR) += i8259.o indirect_pci.o pci_auto.o \ todc_time.o +obj-$(CONFIG_BAMBOO) += indirect_pci.o pci_auto.o todc_time.o obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o obj-$(CONFIG_EBONY) += indirect_pci.o pci_auto.o todc_time.o obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o diff --git a/arch/ppc/syslib/cpm2_common.c b/arch/ppc/syslib/cpm2_common.c index ea5e77080e8d..cbac44b1620c 100644 --- a/arch/ppc/syslib/cpm2_common.c +++ b/arch/ppc/syslib/cpm2_common.c @@ -21,13 +21,12 @@ #include <linux/string.h> #include <linux/mm.h> #include <linux/interrupt.h> -#include <linux/bootmem.h> #include <linux/module.h> +#include <asm/io.h> #include <asm/irq.h> #include <asm/mpc8260.h> #include <asm/page.h> #include <asm/pgtable.h> -#include <asm/immap_cpm2.h> #include <asm/cpm2.h> #include <asm/rheap.h> diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c index 4ad85e0e0234..d4776af6a3ca 100644 --- a/arch/ppc/syslib/ibm440gx_common.c +++ b/arch/ppc/syslib/ibm440gx_common.c @@ -34,6 +34,10 @@ void __init ibm440gx_get_clocks(struct ibm44x_clocks* p, unsigned int sys_clk, u32 plld = CPR_READ(DCRN_CPR_PLLD); u32 uart0 = SDR_READ(DCRN_SDR_UART0); u32 uart1 = SDR_READ(DCRN_SDR_UART1); +#ifdef CONFIG_440EP + u32 uart2 = SDR_READ(DCRN_SDR_UART2); + u32 uart3 = SDR_READ(DCRN_SDR_UART3); +#endif /* Dividers */ u32 fbdv = __fix_zero((plld >> 24) & 0x1f, 32); @@ -96,6 +100,17 @@ bypass: p->uart1 = ser_clk; else p->uart1 = p->plb / __fix_zero(uart1 & 0xff, 256); +#ifdef CONFIG_440EP + if (uart2 & 0x00800000) + p->uart2 = ser_clk; + else + p->uart2 = p->plb / __fix_zero(uart2 & 0xff, 256); + + if (uart3 & 0x00800000) + p->uart3 = ser_clk; + else + p->uart3 = p->plb / __fix_zero(uart3 & 0xff, 256); +#endif } /* Issue L2C diagnostic command */ diff --git a/arch/ppc/syslib/ibm44x_common.h b/arch/ppc/syslib/ibm44x_common.h index b14eb603ce01..c16b6a5ac6ab 100644 --- a/arch/ppc/syslib/ibm44x_common.h +++ b/arch/ppc/syslib/ibm44x_common.h @@ -29,6 +29,10 @@ struct ibm44x_clocks { unsigned int ebc; /* PerClk */ unsigned int uart0; unsigned int uart1; +#ifdef CONFIG_440EP + unsigned int uart2; + unsigned int uart3; +#endif }; /* common 44x platform init */ diff --git a/arch/ppc/syslib/indirect_pci.c b/arch/ppc/syslib/indirect_pci.c index a5a752609e2c..e71488469704 100644 --- a/arch/ppc/syslib/indirect_pci.c +++ b/arch/ppc/syslib/indirect_pci.c @@ -14,7 +14,6 @@ #include <linux/delay.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/bootmem.h> #include <asm/io.h> #include <asm/prom.h> diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c index 580ed658e872..8f01e0f1d847 100644 --- a/arch/ppc/syslib/ipic.c +++ b/arch/ppc/syslib/ipic.c @@ -79,7 +79,7 @@ static struct ipic_info ipic_info[] = { .prio_mask = 7, }, [17] = { - .pend = IPIC_SIPNR_H, + .pend = IPIC_SEPNR, .mask = IPIC_SEMSR, .prio = IPIC_SMPRR_A, .force = IPIC_SEFCR, @@ -87,7 +87,7 @@ static struct ipic_info ipic_info[] = { .prio_mask = 5, }, [18] = { - .pend = IPIC_SIPNR_H, + .pend = IPIC_SEPNR, .mask = IPIC_SEMSR, .prio = IPIC_SMPRR_A, .force = IPIC_SEFCR, @@ -95,7 +95,7 @@ static struct ipic_info ipic_info[] = { .prio_mask = 6, }, [19] = { - .pend = IPIC_SIPNR_H, + .pend = IPIC_SEPNR, .mask = IPIC_SEMSR, .prio = IPIC_SMPRR_A, .force = IPIC_SEFCR, @@ -103,7 +103,7 @@ static struct ipic_info ipic_info[] = { .prio_mask = 7, }, [20] = { - .pend = IPIC_SIPNR_H, + .pend = IPIC_SEPNR, .mask = IPIC_SEMSR, .prio = IPIC_SMPRR_B, .force = IPIC_SEFCR, @@ -111,7 +111,7 @@ static struct ipic_info ipic_info[] = { .prio_mask = 4, }, [21] = { - .pend = IPIC_SIPNR_H, + .pend = IPIC_SEPNR, .mask = IPIC_SEMSR, .prio = IPIC_SMPRR_B, .force = IPIC_SEFCR, @@ -119,7 +119,7 @@ static struct ipic_info ipic_info[] = { .prio_mask = 5, }, [22] = { - .pend = IPIC_SIPNR_H, + .pend = IPIC_SEPNR, .mask = IPIC_SEMSR, .prio = IPIC_SMPRR_B, .force = IPIC_SEFCR, @@ -127,7 +127,7 @@ static struct ipic_info ipic_info[] = { .prio_mask = 6, }, [23] = { - .pend = IPIC_SIPNR_H, + .pend = IPIC_SEPNR, .mask = IPIC_SEMSR, .prio = IPIC_SMPRR_B, .force = IPIC_SEFCR, diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c index fda75d79050c..8f80a42dfdb7 100644 --- a/arch/ppc/syslib/m8260_setup.c +++ b/arch/ppc/syslib/m8260_setup.c @@ -24,7 +24,7 @@ #include <asm/io.h> #include <asm/pgtable.h> #include <asm/mpc8260.h> -#include <asm/immap_cpm2.h> +#include <asm/cpm2.h> #include <asm/machdep.h> #include <asm/bootinfo.h> #include <asm/time.h> @@ -33,7 +33,6 @@ unsigned char __res[sizeof(bd_t)]; -extern void cpm2_reset(void); extern void pq2_find_bridges(void); extern void pq2pci_init_irq(void); extern void idma_pci9_init(void); diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c index 5e7a7edcea74..9db58c587b46 100644 --- a/arch/ppc/syslib/m82xx_pci.c +++ b/arch/ppc/syslib/m82xx_pci.c @@ -238,9 +238,9 @@ pq2ads_setup_pci(struct pci_controller *hose) * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), * and local bus for PCI (SIUMCR [LBPC]). */ - immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.sc_siumcr & - ~(SIUMCR_L2PC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) | - SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10; + immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.siu_82xx.sc_siumcr & + ~(SIUMCR_L2CPC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) | + SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10); #endif /* Enable PCI */ immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index c1db2ab1d154..55a381af4e37 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -57,7 +57,7 @@ unsigned char __res[sizeof(bd_t)]; extern void m8xx_ide_init(void); extern unsigned long find_available_memory(void); -extern void m8xx_cpm_reset(uint cpm_page); +extern void m8xx_cpm_reset(); extern void m8xx_wdt_handler_install(bd_t *bp); extern void rpxfb_alloc_pages(void); extern void cpm_interrupt_init(void); @@ -70,13 +70,9 @@ board_init(void) void __init m8xx_setup_arch(void) { - int cpm_page; - - cpm_page = (int) alloc_bootmem_pages(PAGE_SIZE); - /* Reset the Communication Processor Module. */ - m8xx_cpm_reset(cpm_page); + m8xx_cpm_reset(); #ifdef CONFIG_FB_RPX rpxfb_alloc_pages(); diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c index 8fc5f4154521..87065e2e4c5f 100644 --- a/arch/ppc/syslib/mpc10x_common.c +++ b/arch/ppc/syslib/mpc10x_common.c @@ -45,24 +45,29 @@ #define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS) #define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS) #define MPC10X_UART0_IRQ (EPIC_IRQ_BASE + 4 + NUM_8259_INTERRUPTS) +#define MPC10X_UART1_IRQ (EPIC_IRQ_BASE + 5 + NUM_8259_INTERRUPTS) #else #define MPC10X_I2C_IRQ -1 #define MPC10X_DMA0_IRQ -1 #define MPC10X_DMA1_IRQ -1 #define MPC10X_UART0_IRQ -1 +#define MPC10X_UART1_IRQ -1 #endif static struct fsl_i2c_platform_data mpc10x_i2c_pdata = { .device_flags = 0, }; -static struct plat_serial8250_port serial_platform_data[] = { +static struct plat_serial8250_port serial_plat_uart0[] = { [0] = { .mapbase = 0x4500, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, }, - [1] = { + { }, +}; +static struct plat_serial8250_port serial_plat_uart1[] = { + [0] = { .mapbase = 0x4600, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, @@ -133,11 +138,17 @@ struct platform_device ppc_sys_platform_devices[] = { }, }, }, - [MPC10X_DUART] = { + [MPC10X_UART0] = { .name = "serial8250", .id = 0, - .dev.platform_data = serial_platform_data, + .dev.platform_data = serial_plat_uart0, }, + [MPC10X_UART1] = { + .name = "serial8250", + .id = 1, + .dev.platform_data = serial_plat_uart1, + }, + }; /* We use the PCI ID to match on */ @@ -147,10 +158,10 @@ struct ppc_sys_spec ppc_sys_specs[] = { .ppc_sys_name = "8245", .mask = 0xFFFFFFFF, .value = MPC10X_BRIDGE_8245, - .num_devices = 4, + .num_devices = 5, .device_list = (enum ppc_sys_devices[]) { - MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_DUART, + MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_UART0, MPC10X_UART1, }, }, { @@ -180,6 +191,25 @@ struct ppc_sys_spec ppc_sys_specs[] = { }, }; +/* + * mach_mpc10x_fixup: This function enables DUART mode if it detects + * if it detects two UARTS in the platform device entries. + */ +static int __init mach_mpc10x_fixup(struct platform_device *pdev) +{ + if (strncmp (pdev->name, "serial8250", 10) == 0 && pdev->id == 1) + writeb(readb(serial_plat_uart1[0].membase + 0x11) | 0x1, + serial_plat_uart1[0].membase + 0x11); + return 0; +} + +static int __init mach_mpc10x_init(void) +{ + ppc_sys_device_fixup = mach_mpc10x_fixup; + return 0; +} +postcore_initcall(mach_mpc10x_init); + /* Set resources to match bridge memory map */ void __init mpc10x_bridge_set_resources(int map, struct pci_controller *hose) @@ -219,6 +249,7 @@ mpc10x_bridge_set_resources(int map, struct pci_controller *hose) ppc_md.progress("mpc10x:exit1", 0x100); } } + /* * Do some initialization and put the EUMB registers at the specified address * (also map the EPIC registers into virtual space--OpenPIC_Addr will be set). @@ -411,11 +442,13 @@ mpc10x_bridge_init(struct pci_controller *hose, ppc_sys_platform_devices[MPC10X_DMA1].resource[1].start = MPC10X_DMA1_IRQ; ppc_sys_platform_devices[MPC10X_DMA1].resource[1].end = MPC10X_DMA1_IRQ; - serial_platform_data[0].mapbase += phys_eumb_base; - serial_platform_data[0].irq = MPC10X_UART0_IRQ; + serial_plat_uart0[0].mapbase += phys_eumb_base; + serial_plat_uart0[0].irq = MPC10X_UART0_IRQ; + serial_plat_uart0[0].membase = ioremap(serial_plat_uart0[0].mapbase, 0x100); - serial_platform_data[1].mapbase += phys_eumb_base; - serial_platform_data[1].irq = MPC10X_UART0_IRQ + 1; + serial_plat_uart1[0].mapbase += phys_eumb_base; + serial_plat_uart1[0].irq = MPC10X_UART1_IRQ; + serial_plat_uart1[0].membase = ioremap(serial_plat_uart1[0].mapbase, 0x100); /* * 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c index 75c8e9834ae7..5aaf0e58e1f9 100644 --- a/arch/ppc/syslib/mpc83xx_devices.c +++ b/arch/ppc/syslib/mpc83xx_devices.c @@ -191,8 +191,8 @@ struct platform_device ppc_sys_platform_devices[] = { .num_resources = 2, .resource = (struct resource[]) { { - .start = 0x22000, - .end = 0x22fff, + .start = 0x23000, + .end = 0x23fff, .flags = IORESOURCE_MEM, }, { @@ -208,8 +208,8 @@ struct platform_device ppc_sys_platform_devices[] = { .num_resources = 2, .resource = (struct resource[]) { { - .start = 0x23000, - .end = 0x23fff, + .start = 0x22000, + .end = 0x22fff, .flags = IORESOURCE_MEM, }, { diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c index 7b241e7876bd..cc77177fa1c6 100644 --- a/arch/ppc/syslib/mv64x60.c +++ b/arch/ppc/syslib/mv64x60.c @@ -17,7 +17,6 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/string.h> -#include <linux/bootmem.h> #include <linux/spinlock.h> #include <linux/mv643xx.h> diff --git a/arch/ppc/syslib/mv64x60_win.c b/arch/ppc/syslib/mv64x60_win.c index b6f0f5dcf6ee..5b827e2bbe22 100644 --- a/arch/ppc/syslib/mv64x60_win.c +++ b/arch/ppc/syslib/mv64x60_win.c @@ -17,7 +17,6 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/string.h> -#include <linux/bootmem.h> #include <linux/mv643xx.h> #include <asm/byteorder.h> diff --git a/arch/ppc/syslib/of_device.c b/arch/ppc/syslib/of_device.c index 49c0e34e2d6b..1eb4f726ca9f 100644 --- a/arch/ppc/syslib/of_device.c +++ b/arch/ppc/syslib/of_device.c @@ -3,6 +3,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> +#include <linux/mod_devicetable.h> #include <asm/errno.h> #include <asm/of_device.h> @@ -15,20 +16,20 @@ * Used by a driver to check whether an of_device present in the * system is in its list of supported devices. */ -const struct of_match * of_match_device(const struct of_match *matches, +const struct of_device_id * of_match_device(const struct of_device_id *matches, const struct of_device *dev) { if (!dev->node) return NULL; - while (matches->name || matches->type || matches->compatible) { + while (matches->name[0] || matches->type[0] || matches->compatible[0]) { int match = 1; - if (matches->name && matches->name != OF_ANY_MATCH) + if (matches->name[0]) match &= dev->node->name && !strcmp(matches->name, dev->node->name); - if (matches->type && matches->type != OF_ANY_MATCH) + if (matches->type[0]) match &= dev->node->type && !strcmp(matches->type, dev->node->type); - if (matches->compatible && matches->compatible != OF_ANY_MATCH) + if (matches->compatible[0]) match &= device_is_compatible(dev->node, matches->compatible); if (match) @@ -42,7 +43,7 @@ static int of_platform_bus_match(struct device *dev, struct device_driver *drv) { struct of_device * of_dev = to_of_device(dev); struct of_platform_driver * of_drv = to_of_platform_driver(drv); - const struct of_match * matches = of_drv->match_table; + const struct of_device_id * matches = of_drv->match_table; if (!matches) return 0; @@ -75,7 +76,7 @@ static int of_device_probe(struct device *dev) int error = -ENODEV; struct of_platform_driver *drv; struct of_device *of_dev; - const struct of_match *match; + const struct of_device_id *match; drv = to_of_platform_driver(dev->driver); of_dev = to_of_device(dev); diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index b45d8268bf93..ad39b86ca92c 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -370,8 +370,9 @@ void __init openpic_init(int offset) /* Initialize IPI interrupts */ if ( ppc_md.progress ) ppc_md.progress("openpic: ipi",0x3bb); for (i = 0; i < OPENPIC_NUM_IPI; i++) { - /* Disabled, Priority 10..13 */ - openpic_initipi(i, 10+i, OPENPIC_VEC_IPI+i+offset); + /* Disabled, increased priorities 10..13 */ + openpic_initipi(i, OPENPIC_PRIORITY_IPI_BASE+i, + OPENPIC_VEC_IPI+i+offset); /* IPIs are per-CPU */ irq_desc[OPENPIC_VEC_IPI+i+offset].status |= IRQ_PER_CPU; irq_desc[OPENPIC_VEC_IPI+i+offset].handler = &open_pic_ipi; @@ -399,8 +400,9 @@ void __init openpic_init(int offset) if (sense & IRQ_SENSE_MASK) irq_desc[i+offset].status = IRQ_LEVEL; - /* Enabled, Priority 8 */ - openpic_initirq(i, 8, i+offset, (sense & IRQ_POLARITY_MASK), + /* Enabled, Default priority */ + openpic_initirq(i, OPENPIC_PRIORITY_DEFAULT, i+offset, + (sense & IRQ_POLARITY_MASK), (sense & IRQ_SENSE_MASK)); /* Processor 0 */ openpic_mapirq(i, CPU_MASK_CPU0, CPU_MASK_NONE); @@ -656,6 +658,18 @@ static void __init openpic_maptimer(u_int timer, cpumask_t cpumask) } /* + * Change the priority of an interrupt + */ +void __init +openpic_set_irq_priority(u_int irq, u_int pri) +{ + check_arg_irq(irq); + openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority, + OPENPIC_PRIORITY_MASK, + pri << OPENPIC_PRIORITY_SHIFT); +} + +/* * Initalize the interrupt source which will generate an NMI. * This raises the interrupt's priority from 8 to 9. * @@ -665,9 +679,7 @@ void __init openpic_init_nmi_irq(u_int irq) { check_arg_irq(irq); - openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority, - OPENPIC_PRIORITY_MASK, - 9 << OPENPIC_PRIORITY_SHIFT); + openpic_set_irq_priority(irq, OPENPIC_PRIORITY_NMI); } /* diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c index 05686fa73545..40086212b9c3 100644 --- a/arch/ppc/syslib/ppc4xx_pic.c +++ b/arch/ppc/syslib/ppc4xx_pic.c @@ -110,6 +110,10 @@ static int ppc4xx_pic_get_irq(struct pt_regs *regs) static void __init ppc4xx_pic_impl_init(void) { +#if defined(CONFIG_440GX) + /* Disable 440GP compatibility mode if it was enabled in firmware */ + SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~DCRN_SDR_MFR_PCM); +#endif /* Configure Base UIC */ mtdcr(DCRN_UIC_CR(UICB), 0); mtdcr(DCRN_UIC_TR(UICB), 0); diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c index ca95d79a704e..b7242f1bd931 100644 --- a/arch/ppc/syslib/ppc85xx_setup.c +++ b/arch/ppc/syslib/ppc85xx_setup.c @@ -233,14 +233,14 @@ mpc85xx_setup_pci2(struct pci_controller *hose) pci->powbar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff; /* Enable, Mem R/W */ pci->powar1 = 0x80044000 | - (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1); + (__ilog2(MPC85XX_PCI2_UPPER_MEM - MPC85XX_PCI2_LOWER_MEM + 1) - 1); /* Setup outboud IO windows @ MPC85XX_PCI2_IO_BASE */ pci->potar2 = 0x00000000; pci->potear2 = 0x00000000; pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff; /* Enable, IO R/W */ - pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI1_IO_SIZE) - 1); + pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI2_IO_SIZE) - 1); /* Setup 2G inbound Memory Window @ 0 */ pci->pitar1 = 0x00000000; diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index 0f1fa289744e..2ce87836c671 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -77,6 +77,10 @@ config PPC_PSERIES bool " IBM pSeries & new iSeries" default y +config PPC_BPA + bool " Broadband Processor Architecture" + depends on PPC_MULTIPLATFORM + config PPC_PMAC depends on PPC_MULTIPLATFORM bool " Apple G5 based machines" @@ -106,6 +110,21 @@ config PPC_OF bool default y +config XICS + depends on PPC_PSERIES + bool + default y + +config MPIC + depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE + bool + default y + +config BPA_IIC + depends on PPC_BPA + bool + default y + # VMX is pSeries only for now until somebody writes the iSeries # exception vectors for it config ALTIVEC @@ -123,6 +142,23 @@ config PPC_SPLPAR processors, that is, which share physical processors between two or more partitions. +config KEXEC + bool "kexec system call (EXPERIMENTAL)" + depends on PPC_MULTIPLATFORM && EXPERIMENTAL + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is indepedent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similiarity to the exec system call. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. It may help to enable device hotplugging + support. As of this writing the exact hardware interface is + strongly in flux, so no good recommendation can be made. + config IBMVIO depends on PPC_PSERIES || PPC_ISERIES bool @@ -198,13 +234,49 @@ config HMT This option enables hardware multithreading on RS64 cpus. pSeries systems p620 and p660 have such a cpu type. -config DISCONTIGMEM - bool "Discontiguous Memory Support" +config ARCH_SELECT_MEMORY_MODEL + def_bool y + +config ARCH_FLATMEM_ENABLE + def_bool y + depends on !NUMA + +config ARCH_DISCONTIGMEM_ENABLE + def_bool y depends on SMP && PPC_PSERIES +config ARCH_DISCONTIGMEM_DEFAULT + def_bool y + depends on ARCH_DISCONTIGMEM_ENABLE + +config ARCH_FLATMEM_ENABLE + def_bool y + +config ARCH_SPARSEMEM_ENABLE + def_bool y + depends on ARCH_DISCONTIGMEM_ENABLE + +source "mm/Kconfig" + +config HAVE_ARCH_EARLY_PFN_TO_NID + def_bool y + depends on NEED_MULTIPLE_NODES + +# Some NUMA nodes have memory ranges that span +# other nodes. Even though a pfn is valid and +# between a node's start and end pfns, it may not +# reside on that node. +# +# This is a relatively temporary hack that should +# be able to go away when sparsemem is fully in +# place +config NODES_SPAN_OTHER_NODES + def_bool y + depends on NEED_MULTIPLE_NODES + config NUMA bool "NUMA support" - depends on DISCONTIGMEM + default y if DISCONTIGMEM || SPARSEMEM config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" @@ -215,26 +287,8 @@ config SCHED_SMT when dealing with POWER5 cpus at a cost of slightly increased overhead in some places. If unsure say N here. -config PREEMPT - bool "Preemptible Kernel" - help - This option reduces the latency of the kernel when reacting to - real-time or interactive events by allowing a low priority process to - be preempted even if it is in kernel mode executing a system call. - - Say Y here if you are building a kernel for a desktop, embedded - or real-time system. Say N if you are unsure. - -config PREEMPT_BKL - bool "Preempt The Big Kernel Lock" - depends on PREEMPT - default y - help - This option reduces the latency of the kernel by making the - big kernel lock preemptible. - - Say Y here if you are building a kernel for a desktop system. - Say N if you are unsure. +source "kernel/Kconfig.preempt" +source kernel/Kconfig.hz config EEH bool "PCI Extended Error Handling (EEH)" if EMBEDDED @@ -256,7 +310,7 @@ config MSCHUNKS config PPC_RTAS bool - depends on PPC_PSERIES + depends on PPC_PSERIES || PPC_BPA default y config RTAS_PROC @@ -376,6 +430,8 @@ config CMDLINE endmenu +source "net/Kconfig" + source "drivers/Kconfig" source "fs/Kconfig" diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile index 33c752ceca4b..731b84758331 100644 --- a/arch/ppc64/Makefile +++ b/arch/ppc64/Makefile @@ -90,12 +90,14 @@ boot := arch/ppc64/boot boottarget-$(CONFIG_PPC_PSERIES) := zImage zImage.initrd boottarget-$(CONFIG_PPC_MAPLE) := zImage zImage.initrd boottarget-$(CONFIG_PPC_ISERIES) := vmlinux.sminitrd vmlinux.initrd vmlinux.sm +boottarget-$(CONFIG_PPC_BPA) := zImage zImage.initrd $(boottarget-y): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage bootimage-$(CONFIG_PPC_PMAC) := vmlinux bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage +bootimage-$(CONFIG_PPC_BPA) := zImage bootimage-$(CONFIG_PPC_ISERIES) := vmlinux BOOTIMAGE := $(bootimage-y) install: vmlinux diff --git a/arch/ppc64/boot/Makefile b/arch/ppc64/boot/Makefile index d3e1d6af9203..683b2d43c15f 100644 --- a/arch/ppc64/boot/Makefile +++ b/arch/ppc64/boot/Makefile @@ -52,7 +52,7 @@ obj-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.o, $(section))) src-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.c, $(section))) gz-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.gz, $(section))) -hostprogs-y := piggy addnote addRamDisk +hostprogs-y := addnote addRamDisk targets += zImage zImage.initrd imagesize.c \ $(patsubst $(obj)/%,%, $(call obj-sec, $(required) $(initrd))) \ $(patsubst $(obj)/%,%, $(call src-sec, $(required) $(initrd))) \ @@ -78,9 +78,6 @@ addsection = $(CROSS32OBJCOPY) $(1) \ quiet_cmd_addnote = ADDNOTE $@ cmd_addnote = $(CROSS32LD) $(BOOTLFLAGS) -o $@ $(obj-boot) && $(obj)/addnote $@ -quiet_cmd_piggy = PIGGY $@ - cmd_piggy = $(obj)/piggyback $(@:.o=) < $< | $(CROSS32AS) -o $@ - $(call gz-sec, $(required)): $(obj)/kernel-%.gz: % FORCE $(call if_changed,gzip) diff --git a/arch/ppc64/boot/install.sh b/arch/ppc64/boot/install.sh index 955c5681db6c..cb2d6626b555 100644 --- a/arch/ppc64/boot/install.sh +++ b/arch/ppc64/boot/install.sh @@ -22,8 +22,8 @@ # User may have a custom install script -if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi -if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi +if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi +if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi # Default install diff --git a/arch/ppc64/boot/main.c b/arch/ppc64/boot/main.c index da12ea2ca464..199d9804f61c 100644 --- a/arch/ppc64/boot/main.c +++ b/arch/ppc64/boot/main.c @@ -17,7 +17,6 @@ extern void *finddevice(const char *); extern int getprop(void *, const char *, void *, int); -extern void printk(char *fmt, ...); extern void printf(const char *fmt, ...); extern int sprintf(char *buf, const char *fmt, ...); void gunzip(void *, int, unsigned char *, int *); @@ -147,10 +146,10 @@ void start(unsigned long a1, unsigned long a2, void *promptr) } a1 = initrd.addr; a2 = initrd.size; - printf("initial ramdisk moving 0x%lx <- 0x%lx (%lx bytes)\n\r", + printf("initial ramdisk moving 0x%lx <- 0x%lx (0x%lx bytes)\n\r", initrd.addr, (unsigned long)_initrd_start, initrd.size); memmove((void *)initrd.addr, (void *)_initrd_start, initrd.size); - printf("initrd head: 0x%lx\n\r", *((u32 *)initrd.addr)); + printf("initrd head: 0x%lx\n\r", *((unsigned long *)initrd.addr)); } /* Eventually gunzip the kernel */ @@ -201,9 +200,6 @@ void start(unsigned long a1, unsigned long a2, void *promptr) flush_cache((void *)vmlinux.addr, vmlinux.size); - if (a1) - printf("initrd head: 0x%lx\n\r", *((u32 *)initrd.addr)); - kernel_entry = (kernel_entry_t)vmlinux.addr; #ifdef DEBUG printf( "kernel:\n\r" diff --git a/arch/ppc64/boot/mknote.c b/arch/ppc64/boot/mknote.c deleted file mode 100644 index 120cc1d89739..000000000000 --- a/arch/ppc64/boot/mknote.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) Cort Dougan 1999. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Generate a note section as per the CHRP specification. - * - */ - -#include <stdio.h> - -#define PL(x) printf("%c%c%c%c", ((x)>>24)&0xff, ((x)>>16)&0xff, ((x)>>8)&0xff, (x)&0xff ); - -int main(void) -{ -/* header */ - /* namesz */ - PL(strlen("PowerPC")+1); - /* descrsz */ - PL(6*4); - /* type */ - PL(0x1275); - /* name */ - printf("PowerPC"); printf("%c", 0); - -/* descriptor */ - /* real-mode */ - PL(0xffffffff); - /* real-base */ - PL(0x00c00000); - /* real-size */ - PL(0xffffffff); - /* virt-base */ - PL(0xffffffff); - /* virt-size */ - PL(0xffffffff); - /* load-base */ - PL(0x4000); - return 0; -} diff --git a/arch/ppc64/boot/piggyback.c b/arch/ppc64/boot/piggyback.c deleted file mode 100644 index 235c7a87269c..000000000000 --- a/arch/ppc64/boot/piggyback.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Copyright 2001 IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <stdio.h> -#include <unistd.h> -#include <string.h> - -extern long ce_exec_config[]; - -int main(int argc, char *argv[]) -{ - int i, cnt, pos, len; - unsigned int cksum, val; - unsigned char *lp; - unsigned char buf[8192]; - char *varname; - if (argc != 2) - { - fprintf(stderr, "usage: %s name <in-file >out-file\n", - argv[0]); - exit(1); - } - - varname = strrchr(argv[1], '/'); - if (varname) - varname++; - else - varname = argv[1]; - - fprintf(stdout, "#\n"); - fprintf(stdout, "# Miscellaneous data structures:\n"); - fprintf(stdout, "# WARNING - this file is automatically generated!\n"); - fprintf(stdout, "#\n"); - fprintf(stdout, "\n"); - fprintf(stdout, "\t.data\n"); - fprintf(stdout, "\t.globl %s_data\n", varname); - fprintf(stdout, "%s_data:\n", varname); - pos = 0; - cksum = 0; - while ((len = read(0, buf, sizeof(buf))) > 0) - { - cnt = 0; - lp = (unsigned char *)buf; - len = (len + 3) & ~3; /* Round up to longwords */ - for (i = 0; i < len; i += 4) - { - if (cnt == 0) - { - fprintf(stdout, "\t.long\t"); - } - fprintf(stdout, "0x%02X%02X%02X%02X", lp[0], lp[1], lp[2], lp[3]); - val = *(unsigned long *)lp; - cksum ^= val; - lp += 4; - if (++cnt == 4) - { - cnt = 0; - fprintf(stdout, " # %x \n", pos+i-12); - fflush(stdout); - } else - { - fprintf(stdout, ","); - } - } - if (cnt) - { - fprintf(stdout, "0\n"); - } - pos += len; - } - fprintf(stdout, "\t.globl %s_len\n", varname); - fprintf(stdout, "%s_len:\t.long\t0x%x\n", varname, pos); - fflush(stdout); - fclose(stdout); - fprintf(stderr, "cksum = %x\n", cksum); - exit(0); -} - diff --git a/arch/ppc64/boot/prom.c b/arch/ppc64/boot/prom.c index d5218b15824e..5e48b80ff5a0 100644 --- a/arch/ppc64/boot/prom.c +++ b/arch/ppc64/boot/prom.c @@ -40,7 +40,7 @@ void *finddevice(const char *name); int getprop(void *phandle, const char *name, void *buf, int buflen); void chrpboot(int a1, int a2, void *prom); /* in main.c */ -void printk(char *fmt, ...); +int printf(char *fmt, ...); /* there is no convenient header to get this from... -- paulus */ extern unsigned long strlen(const char *); @@ -220,7 +220,7 @@ readchar(void) case 1: return ch; case -1: - printk("read(stdin) returned -1\r\n"); + printf("read(stdin) returned -1\r\n"); return -1; } } @@ -627,18 +627,6 @@ int sprintf(char * buf, const char *fmt, ...) static char sprint_buf[1024]; -void -printk(char *fmt, ...) -{ - va_list args; - int n; - - va_start(args, fmt); - n = vsprintf(sprint_buf, fmt, args); - va_end(args); - write(stdout, sprint_buf, n); -} - int printf(char *fmt, ...) { diff --git a/arch/ppc64/boot/zlib.c b/arch/ppc64/boot/zlib.c index 9d5e4e9832d2..78837e884b8b 100644 --- a/arch/ppc64/boot/zlib.c +++ b/arch/ppc64/boot/zlib.c @@ -1307,7 +1307,7 @@ local int huft_build( { *t = (inflate_huft *)Z_NULL; *m = 0; - return Z_OK; + return Z_DATA_ERROR; } @@ -1351,6 +1351,7 @@ local int huft_build( if ((j = *p++) != 0) v[x[j]++] = i; } while (++i < n); + n = x[g]; /* set n to length of v */ /* Generate the Huffman codes and for each, make the table entries */ diff --git a/arch/ppc64/configs/bpa_defconfig b/arch/ppc64/configs/bpa_defconfig new file mode 100644 index 000000000000..46c5da41c3ae --- /dev/null +++ b/arch/ppc64/configs/bpa_defconfig @@ -0,0 +1,987 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.13-rc6 +# Mon Aug 8 14:12:19 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +# CONFIG_CPUSETS is not set +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_PSERIES is not set +CONFIG_PPC_BPA=y +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_MAPLE is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_BPA_IIC=y +CONFIG_ALTIVEC=y +CONFIG_KEXEC=y +# CONFIG_U3_DART is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_POWER4_ONLY is not set +# CONFIG_IOMMU_VMERGE is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_NUMA is not set +CONFIG_SCHED_SMT=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# General setup +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_PCI_LEGACY_PROC=y +CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=y +CONFIG_IP_TCPDIAG=y +CONFIG_IP_TCPDIAG_IPV6=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=y +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +CONFIG_IP_NF_CT_PROTO_SCTP=y +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +CONFIG_BLK_DEV_AEC62XX=y +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SIIMAGE=y +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=m +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +CONFIG_SKGE=m +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_N_HDLC is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_STALDRV is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_WATCHDOG_RTAS=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_ISA is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_SENSOR is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +CONFIG_TMPFS_XATTR=y +# CONFIG_TMPFS_SECURITY is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +CONFIG_EFI_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_KPROBES is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUGGER=y +# CONFIG_XMON is not set +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig index 1eb33398648e..ab567741e80e 100644 --- a/arch/ppc64/configs/g5_defconfig +++ b/arch/ppc64/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6 -# Tue Jun 14 16:59:20 2005 +# Linux kernel version: 2.6.13-rc6 +# Mon Aug 8 14:16:59 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -73,12 +73,15 @@ CONFIG_SYSVIPC_COMPAT=y # CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_PSERIES is not set +# CONFIG_PPC_BPA is not set CONFIG_PPC_PMAC=y # CONFIG_PPC_MAPLE is not set CONFIG_PPC=y CONFIG_PPC64=y CONFIG_PPC_OF=y +CONFIG_MPIC=y CONFIG_ALTIVEC=y +CONFIG_KEXEC=y CONFIG_U3_DART=y CONFIG_PPC_PMAC64=y CONFIG_BOOTX_TEXT=y @@ -86,8 +89,24 @@ CONFIG_POWER4_ONLY=y CONFIG_IOMMU_VMERGE=y CONFIG_SMP=y CONFIG_NR_CPUS=2 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_NUMA is not set # CONFIG_SCHED_SMT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 CONFIG_GENERIC_HARDIRQS=y CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -117,6 +136,142 @@ CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_IP_TCPDIAG=m +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -218,6 +373,7 @@ CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -251,6 +407,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -309,6 +466,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -338,6 +496,8 @@ CONFIG_DM_ZERO=m # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support @@ -351,6 +511,7 @@ CONFIG_IEEE1394=y CONFIG_IEEE1394_OUI_DB=y CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y CONFIG_IEEE1394_CONFIG_ROM_IP1394=y +# CONFIG_IEEE1394_EXPORT_FULL_API is not set # # Device Drivers @@ -377,152 +538,14 @@ CONFIG_IEEE1394_RAWIO=y # # Macintosh device drivers # -CONFIG_ADB=y CONFIG_ADB_PMU=y CONFIG_PMAC_SMU=y -# CONFIG_PMAC_PBOOK is not set # CONFIG_PMAC_BACKLIGHT is not set -# CONFIG_INPUT_ADBHID is not set CONFIG_THERM_PM72=y # -# Networking support -# -CONFIG_NET=y - -# -# Networking options +# Network device support # -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -CONFIG_IP_TCPDIAG=m -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m @@ -562,6 +585,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=m # CONFIG_BNX2 is not set @@ -604,6 +628,8 @@ CONFIG_PPPOE=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -691,7 +717,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -750,50 +775,19 @@ CONFIG_I2C_KEYWEST=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_SENSOR is not set # -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support +# Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -805,6 +799,11 @@ CONFIG_I2C_KEYWEST=y # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set + +# # Misc devices # @@ -911,6 +910,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -950,12 +950,15 @@ CONFIG_THRUSTMASTER_FF=y CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set # # USB Imaging devices @@ -1071,10 +1074,11 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -1093,12 +1097,18 @@ CONFIG_USB_EZUSB=y # CONFIG_INFINIBAND is not set # +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -1126,6 +1136,7 @@ CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m @@ -1157,7 +1168,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS_XATTR=y # CONFIG_DEVPTS_FS_SECURITY is not set CONFIG_TMPFS=y @@ -1189,15 +1199,20 @@ CONFIG_CRAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig index f6a2b99afd63..394ba18b58c7 100644 --- a/arch/ppc64/configs/iSeries_defconfig +++ b/arch/ppc64/configs/iSeries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6 -# Tue Jun 14 17:01:28 2005 +# Linux kernel version: 2.6.13-rc6 +# Mon Aug 8 14:17:02 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -80,8 +80,24 @@ CONFIG_IBMVIO=y CONFIG_IOMMU_VMERGE=y CONFIG_SMP=y CONFIG_NR_CPUS=32 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_NUMA is not set # CONFIG_SCHED_SMT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 CONFIG_GENERIC_HARDIRQS=y CONFIG_MSCHUNKS=y CONFIG_LPARCFG=y @@ -110,6 +126,142 @@ CONFIG_PCI_NAMES=y # CONFIG_HOTPLUG_PCI is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_IP_TCPDIAG=m +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -184,6 +336,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -231,6 +384,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -260,6 +414,8 @@ CONFIG_DM_ZERO=m # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support @@ -276,145 +432,8 @@ CONFIG_DM_ZERO=m # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -CONFIG_IP_TCPDIAG=m -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - +# Network device support # -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -CONFIG_NETPOLL_RX=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m @@ -471,6 +490,7 @@ CONFIG_E1000=m # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -514,6 +534,10 @@ CONFIG_PPPOE=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_RX=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y # # ISDN subsystem @@ -587,7 +611,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -610,6 +633,7 @@ CONFIG_MAX_RAW_DEVS=256 # I2C support # # CONFIG_I2C is not set +# CONFIG_I2C_SENSOR is not set # # Dallas's 1-wire bus @@ -617,6 +641,11 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set + +# # Misc devices # @@ -663,12 +692,18 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_INFINIBAND is not set # +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -700,6 +735,7 @@ CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m @@ -731,7 +767,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS_XATTR=y CONFIG_DEVPTS_FS_SECURITY=y CONFIG_TMPFS=y @@ -763,15 +798,20 @@ CONFIG_CRAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig index 8051b0f47b6f..2033fe663dbe 100644 --- a/arch/ppc64/configs/maple_defconfig +++ b/arch/ppc64/configs/maple_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6 -# Tue Jun 14 17:12:48 2005 +# Linux kernel version: 2.6.13-rc6 +# Mon Aug 8 14:17:04 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -73,12 +73,15 @@ CONFIG_SYSVIPC_COMPAT=y # CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_PSERIES is not set +# CONFIG_PPC_BPA is not set # CONFIG_PPC_PMAC is not set CONFIG_PPC_MAPLE=y CONFIG_PPC=y CONFIG_PPC64=y CONFIG_PPC_OF=y +CONFIG_MPIC=y # CONFIG_ALTIVEC is not set +CONFIG_KEXEC=y CONFIG_U3_DART=y CONFIG_MPIC_BROKEN_U3=y CONFIG_BOOTX_TEXT=y @@ -86,8 +89,24 @@ CONFIG_POWER4_ONLY=y CONFIG_IOMMU_VMERGE=y CONFIG_SMP=y CONFIG_NR_CPUS=2 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_NUMA is not set # CONFIG_SCHED_SMT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 CONFIG_GENERIC_HARDIRQS=y CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -116,6 +135,69 @@ CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -213,6 +295,7 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -240,6 +323,7 @@ CONFIG_IDEDMA_AUTO=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -256,70 +340,8 @@ CONFIG_IDEDMA_AUTO=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options +# Network device support # -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -376,6 +398,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -408,6 +431,8 @@ CONFIG_E1000=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -487,7 +512,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -543,50 +567,19 @@ CONFIG_I2C_AMD8111=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_SENSOR is not set # -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support +# Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -598,6 +591,11 @@ CONFIG_I2C_AMD8111=y # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set + +# # Misc devices # @@ -649,6 +647,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -676,12 +675,15 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set # # USB Imaging devices @@ -772,10 +774,11 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -794,16 +797,23 @@ CONFIG_USB_EZUSB=y # CONFIG_INFINIBAND is not set # +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y # # XFS support @@ -811,6 +821,7 @@ CONFIG_JBD=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -838,7 +849,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS_XATTR=y # CONFIG_DEVPTS_FS_SECURITY is not set CONFIG_TMPFS=y @@ -870,12 +880,15 @@ CONFIG_CRAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig index 3eb5ef25d3a3..297fd5229487 100644 --- a/arch/ppc64/configs/pSeries_defconfig +++ b/arch/ppc64/configs/pSeries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6 -# Tue Jun 14 17:13:47 2005 +# Linux kernel version: 2.6.13-rc6 +# Mon Aug 8 14:17:07 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -74,13 +74,17 @@ CONFIG_SYSVIPC_COMPAT=y # CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y CONFIG_PPC_PSERIES=y +# CONFIG_PPC_BPA is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set CONFIG_PPC=y CONFIG_PPC64=y CONFIG_PPC_OF=y +CONFIG_XICS=y +CONFIG_MPIC=y CONFIG_ALTIVEC=y CONFIG_PPC_SPLPAR=y +CONFIG_KEXEC=y CONFIG_IBMVIO=y # CONFIG_U3_DART is not set # CONFIG_BOOTX_TEXT is not set @@ -88,10 +92,30 @@ CONFIG_IBMVIO=y CONFIG_IOMMU_VMERGE=y CONFIG_SMP=y CONFIG_NR_CPUS=128 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y +CONFIG_NODES_SPAN_OTHER_NODES=y CONFIG_NUMA=y CONFIG_SCHED_SMT=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y @@ -132,6 +156,142 @@ CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_IP_TCPDIAG=m +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -238,6 +398,7 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -267,6 +428,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -322,6 +484,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_QLA24XX=m CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -352,6 +515,8 @@ CONFIG_DM_MULTIPATH_EMC=m # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support @@ -368,145 +533,8 @@ CONFIG_DM_MULTIPATH_EMC=m # # -# Networking support +# Network device support # -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -CONFIG_IP_TCPDIAG=m -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -CONFIG_NETPOLL_RX=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m @@ -566,6 +594,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -613,6 +642,10 @@ CONFIG_PPPOE=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_RX=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y # # ISDN subsystem @@ -714,7 +747,6 @@ CONFIG_HVCS=m # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -772,50 +804,19 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_SENSOR is not set # -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support +# Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -827,6 +828,11 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set + +# # Misc devices # @@ -933,6 +939,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -969,12 +976,15 @@ CONFIG_USB_HIDINPUT=y CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set # # USB Imaging devices @@ -1026,10 +1036,11 @@ CONFIG_USB_MON=y # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -1046,18 +1057,25 @@ CONFIG_USB_MON=y # InfiniBand support # CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_USER_VERBS=m CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set # +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -1089,6 +1107,7 @@ CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m @@ -1120,7 +1139,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS_XATTR=y CONFIG_DEVPTS_FS_SECURITY=y CONFIG_TMPFS=y @@ -1152,15 +1170,20 @@ CONFIG_CRAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y diff --git a/arch/ppc64/defconfig b/arch/ppc64/defconfig index 2f31bf3046f9..c361e7727b7a 100644 --- a/arch/ppc64/defconfig +++ b/arch/ppc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc5-git9 -# Sun Jun 5 09:26:47 2005 +# Linux kernel version: 2.6.13-rc6 +# Mon Aug 8 14:16:54 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -73,13 +73,18 @@ CONFIG_SYSVIPC_COMPAT=y # CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y CONFIG_PPC_PSERIES=y +CONFIG_PPC_BPA=y CONFIG_PPC_PMAC=y CONFIG_PPC_MAPLE=y CONFIG_PPC=y CONFIG_PPC64=y CONFIG_PPC_OF=y +CONFIG_XICS=y +CONFIG_MPIC=y +CONFIG_BPA_IIC=y CONFIG_ALTIVEC=y CONFIG_PPC_SPLPAR=y +CONFIG_KEXEC=y CONFIG_IBMVIO=y CONFIG_U3_DART=y CONFIG_MPIC_BROKEN_U3=y @@ -89,10 +94,30 @@ CONFIG_BOOTX_TEXT=y CONFIG_IOMMU_VMERGE=y CONFIG_SMP=y CONFIG_NR_CPUS=32 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y +CONFIG_NODES_SPAN_OTHER_NODES=y # CONFIG_NUMA is not set # CONFIG_SCHED_SMT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y @@ -133,6 +158,142 @@ CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -239,6 +400,7 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -272,6 +434,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -339,6 +502,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_QLA24XX=m CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -369,6 +533,8 @@ CONFIG_DM_MULTIPATH_EMC=m # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support @@ -382,6 +548,7 @@ CONFIG_IEEE1394=y # CONFIG_IEEE1394_OUI_DB is not set CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y CONFIG_IEEE1394_CONFIG_ROM_IP1394=y +# CONFIG_IEEE1394_EXPORT_FULL_API is not set # # Device Drivers @@ -409,154 +576,14 @@ CONFIG_IEEE1394_AMDTP=m # # Macintosh device drivers # -CONFIG_ADB=y CONFIG_ADB_PMU=y CONFIG_PMAC_SMU=y -# CONFIG_PMAC_PBOOK is not set # CONFIG_PMAC_BACKLIGHT is not set -# CONFIG_INPUT_ADBHID is not set CONFIG_THERM_PM72=y # -# Networking support +# Network device support # -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -CONFIG_NETPOLL_RX=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m @@ -616,6 +643,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -661,6 +689,10 @@ CONFIG_PPPOE=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_RX=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y # # ISDN subsystem @@ -764,7 +796,6 @@ CONFIG_HVCS=m # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -823,50 +854,19 @@ CONFIG_I2C_KEYWEST=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_SENSOR is not set # -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support +# Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -878,6 +878,11 @@ CONFIG_I2C_KEYWEST=y # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set + +# # Misc devices # @@ -988,6 +993,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -1024,12 +1030,15 @@ CONFIG_USB_HIDINPUT=y CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set # # USB Imaging devices @@ -1081,10 +1090,11 @@ CONFIG_USB_PEGASUS=y # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -1101,18 +1111,25 @@ CONFIG_USB_PEGASUS=y # InfiniBand support # CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_USER_VERBS=m CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set # +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -1144,6 +1161,7 @@ CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y @@ -1174,7 +1192,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS_XATTR=y CONFIG_DEVPTS_FS_SECURITY=y CONFIG_TMPFS=y @@ -1206,15 +1223,20 @@ CONFIG_CRAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y diff --git a/arch/ppc64/kernel/ItLpQueue.c b/arch/ppc64/kernel/ItLpQueue.c index cdea00d7707f..4231861288a3 100644 --- a/arch/ppc64/kernel/ItLpQueue.c +++ b/arch/ppc64/kernel/ItLpQueue.c @@ -1,7 +1,7 @@ /* * ItLpQueue.c * Copyright (C) 2001 Mike Corrigan IBM Corporation - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -11,156 +11,252 @@ #include <linux/stddef.h> #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/bootmem.h> +#include <linux/seq_file.h> +#include <linux/proc_fs.h> #include <asm/system.h> #include <asm/paca.h> #include <asm/iSeries/ItLpQueue.h> #include <asm/iSeries/HvLpEvent.h> #include <asm/iSeries/HvCallEvent.h> -static __inline__ int set_inUse( struct ItLpQueue * lpQueue ) -{ - int t; - u32 * inUseP = &(lpQueue->xInUseWord); - - __asm__ __volatile__("\n\ -1: lwarx %0,0,%2 \n\ - cmpwi 0,%0,0 \n\ - li %0,0 \n\ - bne- 2f \n\ - addi %0,%0,1 \n\ - stwcx. %0,0,%2 \n\ - bne- 1b \n\ -2: eieio" - : "=&r" (t), "=m" (lpQueue->xInUseWord) - : "r" (inUseP), "m" (lpQueue->xInUseWord) - : "cc"); - - return t; -} +/* + * The LpQueue is used to pass event data from the hypervisor to + * the partition. This is where I/O interrupt events are communicated. + * + * It is written to by the hypervisor so cannot end up in the BSS. + */ +struct hvlpevent_queue hvlpevent_queue __attribute__((__section__(".data"))); -static __inline__ void clear_inUse( struct ItLpQueue * lpQueue ) -{ - lpQueue->xInUseWord = 0; -} +DEFINE_PER_CPU(unsigned long[HvLpEvent_Type_NumTypes], hvlpevent_counts); + +static char *event_types[HvLpEvent_Type_NumTypes] = { + "Hypervisor", + "Machine Facilities", + "Session Manager", + "SPD I/O", + "Virtual Bus", + "PCI I/O", + "RIO I/O", + "Virtual Lan", + "Virtual I/O" +}; /* Array of LpEvent handler functions */ extern LpEventHandler lpEventHandler[HvLpEvent_Type_NumTypes]; -unsigned long ItLpQueueInProcess = 0; -struct HvLpEvent * ItLpQueue_getNextLpEvent( struct ItLpQueue * lpQueue ) +static struct HvLpEvent * get_next_hvlpevent(void) { - struct HvLpEvent * nextLpEvent = - (struct HvLpEvent *)lpQueue->xSlicCurEventPtr; - if ( nextLpEvent->xFlags.xValid ) { + struct HvLpEvent * event; + event = (struct HvLpEvent *)hvlpevent_queue.xSlicCurEventPtr; + + if (event->xFlags.xValid) { /* rmb() needed only for weakly consistent machines (regatta) */ rmb(); /* Set pointer to next potential event */ - lpQueue->xSlicCurEventPtr += ((nextLpEvent->xSizeMinus1 + - LpEventAlign ) / - LpEventAlign ) * - LpEventAlign; + hvlpevent_queue.xSlicCurEventPtr += ((event->xSizeMinus1 + + LpEventAlign) / LpEventAlign) * LpEventAlign; + /* Wrap to beginning if no room at end */ - if (lpQueue->xSlicCurEventPtr > lpQueue->xSlicLastValidEventPtr) - lpQueue->xSlicCurEventPtr = lpQueue->xSlicEventStackPtr; + if (hvlpevent_queue.xSlicCurEventPtr > + hvlpevent_queue.xSlicLastValidEventPtr) { + hvlpevent_queue.xSlicCurEventPtr = + hvlpevent_queue.xSlicEventStackPtr; + } + } else { + event = NULL; } - else - nextLpEvent = NULL; - return nextLpEvent; + return event; } -int ItLpQueue_isLpIntPending( struct ItLpQueue * lpQueue ) +static unsigned long spread_lpevents = NR_CPUS; + +int hvlpevent_is_pending(void) { - int retval = 0; - struct HvLpEvent * nextLpEvent; - if ( lpQueue ) { - nextLpEvent = (struct HvLpEvent *)lpQueue->xSlicCurEventPtr; - retval = nextLpEvent->xFlags.xValid | lpQueue->xPlicOverflowIntPending; - } - return retval; + struct HvLpEvent *next_event; + + if (smp_processor_id() >= spread_lpevents) + return 0; + + next_event = (struct HvLpEvent *)hvlpevent_queue.xSlicCurEventPtr; + + return next_event->xFlags.xValid | + hvlpevent_queue.xPlicOverflowIntPending; } -void ItLpQueue_clearValid( struct HvLpEvent * event ) +static void hvlpevent_clear_valid(struct HvLpEvent * event) { - /* Clear the valid bit of the event - * Also clear bits within this event that might - * look like valid bits (on 64-byte boundaries) - */ - unsigned extra = (( event->xSizeMinus1 + LpEventAlign ) / - LpEventAlign ) - 1; - switch ( extra ) { - case 3: - ((struct HvLpEvent*)((char*)event+3*LpEventAlign))->xFlags.xValid=0; - case 2: - ((struct HvLpEvent*)((char*)event+2*LpEventAlign))->xFlags.xValid=0; - case 1: - ((struct HvLpEvent*)((char*)event+1*LpEventAlign))->xFlags.xValid=0; - case 0: - ; + /* Tell the Hypervisor that we're done with this event. + * Also clear bits within this event that might look like valid bits. + * ie. on 64-byte boundaries. + */ + struct HvLpEvent *tmp; + unsigned extra = ((event->xSizeMinus1 + LpEventAlign) / + LpEventAlign) - 1; + + switch (extra) { + case 3: + tmp = (struct HvLpEvent*)((char*)event + 3 * LpEventAlign); + tmp->xFlags.xValid = 0; + case 2: + tmp = (struct HvLpEvent*)((char*)event + 2 * LpEventAlign); + tmp->xFlags.xValid = 0; + case 1: + tmp = (struct HvLpEvent*)((char*)event + 1 * LpEventAlign); + tmp->xFlags.xValid = 0; } + mb(); + event->xFlags.xValid = 0; } -unsigned ItLpQueue_process( struct ItLpQueue * lpQueue, struct pt_regs *regs ) +void process_hvlpevents(struct pt_regs *regs) { - unsigned numIntsProcessed = 0; - struct HvLpEvent * nextLpEvent; + struct HvLpEvent * event; /* If we have recursed, just return */ - if ( !set_inUse( lpQueue ) ) - return 0; - - if (ItLpQueueInProcess == 0) - ItLpQueueInProcess = 1; - else - BUG(); + if (!spin_trylock(&hvlpevent_queue.lock)) + return; for (;;) { - nextLpEvent = ItLpQueue_getNextLpEvent( lpQueue ); - if ( nextLpEvent ) { - /* Count events to return to caller - * and count processed events in lpQueue - */ - ++numIntsProcessed; - lpQueue->xLpIntCount++; - /* Call appropriate handler here, passing + event = get_next_hvlpevent(); + if (event) { + /* Call appropriate handler here, passing * a pointer to the LpEvent. The handler * must make a copy of the LpEvent if it * needs it in a bottom half. (perhaps for * an ACK) - * - * Handlers are responsible for ACK processing + * + * Handlers are responsible for ACK processing * * The Hypervisor guarantees that LpEvents will * only be delivered with types that we have * registered for, so no type check is necessary * here! - */ - if ( nextLpEvent->xType < HvLpEvent_Type_NumTypes ) - lpQueue->xLpIntCountByType[nextLpEvent->xType]++; - if ( nextLpEvent->xType < HvLpEvent_Type_NumTypes && - lpEventHandler[nextLpEvent->xType] ) - lpEventHandler[nextLpEvent->xType](nextLpEvent, regs); + */ + if (event->xType < HvLpEvent_Type_NumTypes) + __get_cpu_var(hvlpevent_counts)[event->xType]++; + if (event->xType < HvLpEvent_Type_NumTypes && + lpEventHandler[event->xType]) + lpEventHandler[event->xType](event, regs); else - printk(KERN_INFO "Unexpected Lp Event type=%d\n", nextLpEvent->xType ); - - ItLpQueue_clearValid( nextLpEvent ); - } else if ( lpQueue->xPlicOverflowIntPending ) + printk(KERN_INFO "Unexpected Lp Event type=%d\n", event->xType ); + + hvlpevent_clear_valid(event); + } else if (hvlpevent_queue.xPlicOverflowIntPending) /* * No more valid events. If overflow events are * pending process them */ - HvCallEvent_getOverflowLpEvents( lpQueue->xIndex); + HvCallEvent_getOverflowLpEvents(hvlpevent_queue.xIndex); else break; } - ItLpQueueInProcess = 0; - mb(); - clear_inUse( lpQueue ); + spin_unlock(&hvlpevent_queue.lock); +} + +static int set_spread_lpevents(char *str) +{ + unsigned long val = simple_strtoul(str, NULL, 0); + + /* + * The parameter is the number of processors to share in processing + * lp events. + */ + if (( val > 0) && (val <= NR_CPUS)) { + spread_lpevents = val; + printk("lpevent processing spread over %ld processors\n", val); + } else { + printk("invalid spread_lpevents %ld\n", val); + } - get_paca()->lpevent_count += numIntsProcessed; + return 1; +} +__setup("spread_lpevents=", set_spread_lpevents); + +void setup_hvlpevent_queue(void) +{ + void *eventStack; + + /* + * Allocate a page for the Event Stack. The Hypervisor needs the + * absolute real address, so we subtract out the KERNELBASE and add + * in the absolute real address of the kernel load area. + */ + eventStack = alloc_bootmem_pages(LpEventStackSize); + memset(eventStack, 0, LpEventStackSize); + + /* Invoke the hypervisor to initialize the event stack */ + HvCallEvent_setLpEventStack(0, eventStack, LpEventStackSize); + + hvlpevent_queue.xSlicEventStackPtr = (char *)eventStack; + hvlpevent_queue.xSlicCurEventPtr = (char *)eventStack; + hvlpevent_queue.xSlicLastValidEventPtr = (char *)eventStack + + (LpEventStackSize - LpEventMaxSize); + hvlpevent_queue.xIndex = 0; +} + +static int proc_lpevents_show(struct seq_file *m, void *v) +{ + int cpu, i; + unsigned long sum; + static unsigned long cpu_totals[NR_CPUS]; + + /* FIXME: do we care that there's no locking here? */ + sum = 0; + for_each_online_cpu(cpu) { + cpu_totals[cpu] = 0; + for (i = 0; i < HvLpEvent_Type_NumTypes; i++) { + cpu_totals[cpu] += per_cpu(hvlpevent_counts, cpu)[i]; + } + sum += cpu_totals[cpu]; + } + + seq_printf(m, "LpEventQueue 0\n"); + seq_printf(m, " events processed:\t%lu\n", sum); + + for (i = 0; i < HvLpEvent_Type_NumTypes; ++i) { + sum = 0; + for_each_online_cpu(cpu) { + sum += per_cpu(hvlpevent_counts, cpu)[i]; + } + + seq_printf(m, " %-20s %10lu\n", event_types[i], sum); + } + + seq_printf(m, "\n events processed by processor:\n"); + + for_each_online_cpu(cpu) { + seq_printf(m, " CPU%02d %10lu\n", cpu, cpu_totals[cpu]); + } + + return 0; +} + +static int proc_lpevents_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_lpevents_show, NULL); +} - return numIntsProcessed; +static struct file_operations proc_lpevents_operations = { + .open = proc_lpevents_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init proc_lpevents_init(void) +{ + struct proc_dir_entry *e; + + e = create_proc_entry("iSeries/lpevents", S_IFREG|S_IRUGO, NULL); + if (e) + e->proc_fops = &proc_lpevents_operations; + + return 0; } +__initcall(proc_lpevents_init); + diff --git a/arch/ppc64/kernel/LparData.c b/arch/ppc64/kernel/LparData.c index badc5a443614..76cfd1449d52 100644 --- a/arch/ppc64/kernel/LparData.c +++ b/arch/ppc64/kernel/LparData.c @@ -28,29 +28,41 @@ #include <asm/iSeries/IoHriProcessorVpd.h> #include <asm/iSeries/ItSpCommArea.h> -/* The LpQueue is used to pass event data from the hypervisor to - * the partition. This is where I/O interrupt events are communicated. - */ - -/* May be filled in by the hypervisor so cannot end up in the BSS */ -struct ItLpQueue xItLpQueue __attribute__((__section__(".data"))); - /* The HvReleaseData is the root of the information shared between * the hypervisor and Linux. */ +/* + * WARNING - magic here + * + * Ok, this is a horrid hack below, but marginally better than the + * alternatives. What we really want is just to initialize + * hvReleaseData in C as in the #if 0 section here. However, gcc + * refuses to believe that (u32)&x is a constant expression, so will + * not allow the xMsNucDataOffset field to be properly initialized. + * So, we declare hvReleaseData in inline asm instead. We use inline + * asm, rather than a .S file, because the assembler won't generate + * the necessary relocation for the LparMap either, unless that symbol + * is declared in the same source file. Finally, we put the asm in a + * dummy, attribute-used function, instead of at file scope, because + * file scope asms don't allow contraints. We want to use the "i" + * constraints to put sizeof() and offsetof() expressions in there, + * because including asm/offsets.h in C code then stringifying causes + * all manner of warnings. + */ +#if 0 struct HvReleaseData hvReleaseData = { .xDesc = 0xc8a5d9c4, /* "HvRD" ebcdic */ .xSize = sizeof(struct HvReleaseData), .xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas), .xSlicNacaAddr = &naca, /* 64-bit Naca address */ - .xMsNucDataOffset = 0x4800, /* offset of LparMap within loadarea (see head.S) */ - .xTagsMode = 1, /* tags inactive */ - .xAddressSize = 0, /* 64 bit */ - .xNoSharedProcs = 0, /* shared processors */ - .xNoHMT = 0, /* HMT allowed */ - .xRsvd2 = 6, /* TEMP: This allows non-GA driver */ + .xMsNucDataOffset = (u32)((unsigned long)&xLparMap - KERNELBASE), + .xFlags = HVREL_TAGSINACTIVE /* tags inactive */ + /* 64 bit */ + /* shared processors */ + /* HMT allowed */ + | 6, /* TEMP: This allows non-GA driver */ .xVrmIndex = 4, /* We are v5r2m0 */ .xMinSupportedPlicVrmIndex = 3, /* v5r1m0 */ .xMinCompatablePlicVrmIndex = 3, /* v5r1m0 */ @@ -58,6 +70,63 @@ struct HvReleaseData hvReleaseData = { 0xa7, 0x40, 0xf2, 0x4b, 0xf4, 0x4b, 0xf6, 0xf4 }, }; +#endif + + +extern struct HvReleaseData hvReleaseData; + +static void __attribute_used__ hvReleaseData_wrapper(void) +{ + /* This doesn't appear to need any alignment (even 4 byte) */ + asm volatile ( + " lparMapPhys = xLparMap - %3\n" + " .data\n" + " .globl hvReleaseData\n" + "hvReleaseData:\n" + " .long 0xc8a5d9c4\n" /* xDesc */ + /* "HvRD" in ebcdic */ + " .short %0\n" /* xSize */ + " .short %1\n" /* xVpdAreasPtrOffset */ + " .llong naca\n" /* xSlicNacaAddr */ + " .long lparMapPhys\n" /* xMsNucDataOffset */ + " .long 0\n" /* xRsvd1 */ + " .short %2\n" /* xFlags */ + " .short 4\n" /* xVrmIndex - v5r2m0 */ + " .short 3\n" /* xMinSupportedPlicVrmIndex - v5r1m0 */ + " .short 3\n" /* xMinCompatablePlicVrmIndex - v5r1m0 */ + " .long 0xd38995a4\n" /* xVrmName */ + " .long 0xa740f24b\n" /* "Linux 2.4.64" ebcdic */ + " .long 0xf44bf6f4\n" + " . = hvReleaseData + %0\n" + " .previous\n" + : : "i"(sizeof(hvReleaseData)), + "i"(offsetof(struct naca_struct, xItVpdAreas)), + "i"(HVREL_TAGSINACTIVE /* tags inactive, 64 bit, */ + /* shared processors, HMT allowed */ + | 6), /* TEMP: This allows non-GA drivers */ + "i"(KERNELBASE) + ); +} + +struct LparMap __attribute__((aligned (16))) xLparMap = { + .xNumberEsids = HvEsidsToMap, + .xNumberRanges = HvRangesToMap, + .xSegmentTableOffs = STAB0_PAGE, + + .xEsids = { + { .xKernelEsid = GET_ESID(KERNELBASE), + .xKernelVsid = KERNEL_VSID(KERNELBASE), }, + { .xKernelEsid = GET_ESID(VMALLOCBASE), + .xKernelVsid = KERNEL_VSID(VMALLOCBASE), }, + }, + + .xRanges = { + { .xPages = HvPagesToMap, + .xOffset = 0, + .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT), + }, + }, +}; extern void system_reset_iSeries(void); extern void machine_check_iSeries(void); @@ -200,7 +269,7 @@ struct ItVpdAreas itVpdAreas = { 0,0,0, /* 13 - 15 */ sizeof(struct IoHriProcessorVpd),/* 16 length of Proc Vpd */ 0,0,0,0,0,0, /* 17 - 22 */ - sizeof(struct ItLpQueue),/* 23 length of Lp Queue */ + sizeof(struct hvlpevent_queue), /* 23 length of Lp Queue */ 0,0 /* 24 - 25 */ }, .xSlicVpdAdrs = { /* VPD addresses */ @@ -218,7 +287,7 @@ struct ItVpdAreas itVpdAreas = { 0,0,0, /* 13 - 15 */ &xIoHriProcessorVpd, /* 16 Proc Vpd */ 0,0,0,0,0,0, /* 17 - 22 */ - &xItLpQueue, /* 23 Lp Queue */ + &hvlpevent_queue, /* 23 Lp Queue */ 0,0 } }; diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index b5e167cf1a05..d9b2660ef221 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -27,17 +27,22 @@ obj-$(CONFIG_PPC_ISERIES) += HvCall.o HvLpConfig.o LparData.o \ mf.o HvLpEvent.o iSeries_proc.o iSeries_htab.o \ iSeries_iommu.o -obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o prom_init.o prom.o mpic.o +obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o prom_init.o prom.o obj-$(CONFIG_PPC_PSERIES) += pSeries_pci.o pSeries_lpar.o pSeries_hvCall.o \ pSeries_nvram.o rtasd.o ras.o pSeries_reconfig.o \ - xics.o rtas.o pSeries_setup.o pSeries_iommu.o + pSeries_setup.o pSeries_iommu.o +obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_iommu.o bpa_nvram.o \ + bpa_iic.o spider-pic.o + +obj-$(CONFIG_KEXEC) += machine_kexec.o obj-$(CONFIG_EEH) += eeh.o obj-$(CONFIG_PROC_FS) += proc_ppc64.o obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o +obj-$(CONFIG_PPC_RTAS) += rtas.o rtas_pci.o obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_SCANLOG) += scanlog.o obj-$(CONFIG_VIOPATH) += viopath.o @@ -46,6 +51,8 @@ obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_HVCS) += hvcserver.o obj-$(CONFIG_IBMVIO) += vio.o +obj-$(CONFIG_XICS) += xics.o +obj-$(CONFIG_MPIC) += mpic.o obj-$(CONFIG_PPC_PMAC) += pmac_setup.o pmac_feature.o pmac_pci.o \ pmac_time.o pmac_nvram.o pmac_low_i2c.o @@ -58,6 +65,7 @@ ifdef CONFIG_SMP obj-$(CONFIG_PPC_PMAC) += pmac_smp.o smp-tbsync.o obj-$(CONFIG_PPC_ISERIES) += iSeries_smp.o obj-$(CONFIG_PPC_PSERIES) += pSeries_smp.o +obj-$(CONFIG_PPC_BPA) += pSeries_smp.o obj-$(CONFIG_PPC_MAPLE) += smp-tbsync.o endif diff --git a/arch/ppc64/kernel/bpa_iic.c b/arch/ppc64/kernel/bpa_iic.c new file mode 100644 index 000000000000..c8f3dc3fad70 --- /dev/null +++ b/arch/ppc64/kernel/bpa_iic.c @@ -0,0 +1,270 @@ +/* + * BPA Internal Interrupt Controller + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann <arndb@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/percpu.h> +#include <linux/types.h> + +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/ptrace.h> + +#include "bpa_iic.h" + +struct iic_pending_bits { + u32 data; + u8 flags; + u8 class; + u8 source; + u8 prio; +}; + +enum iic_pending_flags { + IIC_VALID = 0x80, + IIC_IPI = 0x40, +}; + +struct iic_regs { + struct iic_pending_bits pending; + struct iic_pending_bits pending_destr; + u64 generate; + u64 prio; +}; + +struct iic { + struct iic_regs __iomem *regs; +}; + +static DEFINE_PER_CPU(struct iic, iic); + +void iic_local_enable(void) +{ + out_be64(&__get_cpu_var(iic).regs->prio, 0xff); +} + +void iic_local_disable(void) +{ + out_be64(&__get_cpu_var(iic).regs->prio, 0x0); +} + +static unsigned int iic_startup(unsigned int irq) +{ + return 0; +} + +static void iic_enable(unsigned int irq) +{ + iic_local_enable(); +} + +static void iic_disable(unsigned int irq) +{ +} + +static void iic_end(unsigned int irq) +{ + iic_local_enable(); +} + +static struct hw_interrupt_type iic_pic = { + .typename = " BPA-IIC ", + .startup = iic_startup, + .enable = iic_enable, + .disable = iic_disable, + .end = iic_end, +}; + +static int iic_external_get_irq(struct iic_pending_bits pending) +{ + int irq; + unsigned char node, unit; + + node = pending.source >> 4; + unit = pending.source & 0xf; + irq = -1; + + /* + * This mapping is specific to the Broadband + * Engine. We might need to get the numbers + * from the device tree to support future CPUs. + */ + switch (unit) { + case 0x00: + case 0x0b: + /* + * One of these units can be connected + * to an external interrupt controller. + */ + if (pending.prio > 0x3f || + pending.class != 2) + break; + irq = IIC_EXT_OFFSET + + spider_get_irq(pending.prio + node * IIC_NODE_STRIDE) + + node * IIC_NODE_STRIDE; + break; + case 0x01 ... 0x04: + case 0x07 ... 0x0a: + /* + * These units are connected to the SPEs + */ + if (pending.class > 2) + break; + irq = IIC_SPE_OFFSET + + pending.class * IIC_CLASS_STRIDE + + node * IIC_NODE_STRIDE + + unit; + break; + } + if (irq == -1) + printk(KERN_WARNING "Unexpected interrupt class %02x, " + "source %02x, prio %02x, cpu %02x\n", pending.class, + pending.source, pending.prio, smp_processor_id()); + return irq; +} + +/* Get an IRQ number from the pending state register of the IIC */ +int iic_get_irq(struct pt_regs *regs) +{ + struct iic *iic; + int irq; + struct iic_pending_bits pending; + + iic = &__get_cpu_var(iic); + *(unsigned long *) &pending = + in_be64((unsigned long __iomem *) &iic->regs->pending_destr); + + irq = -1; + if (pending.flags & IIC_VALID) { + if (pending.flags & IIC_IPI) { + irq = IIC_IPI_OFFSET + (pending.prio >> 4); +/* + if (irq > 0x80) + printk(KERN_WARNING "Unexpected IPI prio %02x" + "on CPU %02x\n", pending.prio, + smp_processor_id()); +*/ + } else { + irq = iic_external_get_irq(pending); + } + } + return irq; +} + +static struct iic_regs __iomem *find_iic(int cpu) +{ + struct device_node *np; + int nodeid = cpu / 2; + unsigned long regs; + struct iic_regs __iomem *iic_regs; + + for (np = of_find_node_by_type(NULL, "cpu"); + np; + np = of_find_node_by_type(np, "cpu")) { + if (nodeid == *(int *)get_property(np, "node-id", NULL)) + break; + } + + if (!np) { + printk(KERN_WARNING "IIC: CPU %d not found\n", cpu); + iic_regs = NULL; + } else { + regs = *(long *)get_property(np, "iic", NULL); + + /* hack until we have decided on the devtree info */ + regs += 0x400; + if (cpu & 1) + regs += 0x20; + + printk(KERN_DEBUG "IIC for CPU %d at %lx\n", cpu, regs); + iic_regs = __ioremap(regs, sizeof(struct iic_regs), + _PAGE_NO_CACHE); + } + return iic_regs; +} + +#ifdef CONFIG_SMP +void iic_setup_cpu(void) +{ + out_be64(&__get_cpu_var(iic).regs->prio, 0xff); +} + +void iic_cause_IPI(int cpu, int mesg) +{ + out_be64(&per_cpu(iic, cpu).regs->generate, mesg); +} + +static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs) +{ + + smp_message_recv(irq - IIC_IPI_OFFSET, regs); + return IRQ_HANDLED; +} + +static void iic_request_ipi(int irq, const char *name) +{ + /* IPIs are marked SA_INTERRUPT as they must run with irqs + * disabled */ + get_irq_desc(irq)->handler = &iic_pic; + get_irq_desc(irq)->status |= IRQ_PER_CPU; + request_irq(irq, iic_ipi_action, SA_INTERRUPT, name, NULL); +} + +void iic_request_IPIs(void) +{ + iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_CALL_FUNCTION, "IPI-call"); + iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_RESCHEDULE, "IPI-resched"); +#ifdef CONFIG_DEBUGGER + iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_DEBUGGER_BREAK, "IPI-debug"); +#endif /* CONFIG_DEBUGGER */ +} +#endif /* CONFIG_SMP */ + +static void iic_setup_spe_handlers(void) +{ + int be, isrc; + + /* Assume two threads per BE are present */ + for (be=0; be < num_present_cpus() / 2; be++) { + for (isrc = 0; isrc < IIC_CLASS_STRIDE * 3; isrc++) { + int irq = IIC_NODE_STRIDE * be + IIC_SPE_OFFSET + isrc; + get_irq_desc(irq)->handler = &iic_pic; + } + } +} + +void iic_init_IRQ(void) +{ + int cpu, irq_offset; + struct iic *iic; + + irq_offset = 0; + for_each_cpu(cpu) { + iic = &per_cpu(iic, cpu); + iic->regs = find_iic(cpu); + if (iic->regs) + out_be64(&iic->regs->prio, 0xff); + } + iic_setup_spe_handlers(); +} diff --git a/arch/ppc64/kernel/bpa_iic.h b/arch/ppc64/kernel/bpa_iic.h new file mode 100644 index 000000000000..6833c3022166 --- /dev/null +++ b/arch/ppc64/kernel/bpa_iic.h @@ -0,0 +1,62 @@ +#ifndef ASM_BPA_IIC_H +#define ASM_BPA_IIC_H +#ifdef __KERNEL__ +/* + * Mapping of IIC pending bits into per-node + * interrupt numbers. + * + * IRQ FF CC SS PP FF CC SS PP Description + * + * 00-3f 80 02 +0 00 - 80 02 +0 3f South Bridge + * 00-3f 80 02 +b 00 - 80 02 +b 3f South Bridge + * 41-4a 80 00 +1 ** - 80 00 +a ** SPU Class 0 + * 51-5a 80 01 +1 ** - 80 01 +a ** SPU Class 1 + * 61-6a 80 02 +1 ** - 80 02 +a ** SPU Class 2 + * 70-7f C0 ** ** 00 - C0 ** ** 0f IPI + * + * F flags + * C class + * S source + * P Priority + * + node number + * * don't care + * + * A node consists of a Broadband Engine and an optional + * south bridge device providing a maximum of 64 IRQs. + * The south bridge may be connected to either IOIF0 + * or IOIF1. + * Each SPE is represented as three IRQ lines, one per + * interrupt class. + * 16 IRQ numbers are reserved for inter processor + * interruptions, although these are only used in the + * range of the first node. + * + * This scheme needs 128 IRQ numbers per BIF node ID, + * which means that with the total of 512 lines + * available, we can have a maximum of four nodes. + */ + +enum { + IIC_EXT_OFFSET = 0x00, /* Start of south bridge IRQs */ + IIC_NUM_EXT = 0x40, /* Number of south bridge IRQs */ + IIC_SPE_OFFSET = 0x40, /* Start of SPE interrupts */ + IIC_CLASS_STRIDE = 0x10, /* SPE IRQs per class */ + IIC_IPI_OFFSET = 0x70, /* Start of IPI IRQs */ + IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */ + IIC_NODE_STRIDE = 0x80, /* Total IRQs per node */ +}; + +extern void iic_init_IRQ(void); +extern int iic_get_irq(struct pt_regs *regs); +extern void iic_cause_IPI(int cpu, int mesg); +extern void iic_request_IPIs(void); +extern void iic_setup_cpu(void); +extern void iic_local_enable(void); +extern void iic_local_disable(void); + + +extern void spider_init_IRQ(void); +extern int spider_get_irq(unsigned long int_pending); + +#endif +#endif /* ASM_BPA_IIC_H */ diff --git a/arch/ppc64/kernel/bpa_iommu.c b/arch/ppc64/kernel/bpa_iommu.c new file mode 100644 index 000000000000..f33a7bccb0d7 --- /dev/null +++ b/arch/ppc64/kernel/bpa_iommu.c @@ -0,0 +1,377 @@ +/* + * IOMMU implementation for Broadband Processor Architecture + * We just establish a linear mapping at boot by setting all the + * IOPT cache entries in the CPU. + * The mapping functions should be identical to pci_direct_iommu, + * except for the handling of the high order bit that is required + * by the Spider bridge. These should be split into a separate + * file at the point where we get a different bridge chip. + * + * Copyright (C) 2005 IBM Deutschland Entwicklung GmbH, + * Arnd Bergmann <arndb@de.ibm.com> + * + * Based on linear mapping + * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/mm.h> +#include <linux/dma-mapping.h> + +#include <asm/sections.h> +#include <asm/iommu.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/abs_addr.h> +#include <asm/system.h> + +#include "pci.h" +#include "bpa_iommu.h" + +static inline unsigned long +get_iopt_entry(unsigned long real_address, unsigned long ioid, + unsigned long prot) +{ + return (prot & IOPT_PROT_MASK) + | (IOPT_COHERENT) + | (IOPT_ORDER_VC) + | (real_address & IOPT_RPN_MASK) + | (ioid & IOPT_IOID_MASK); +} + +typedef struct { + unsigned long val; +} ioste; + +static inline ioste +mk_ioste(unsigned long val) +{ + ioste ioste = { .val = val, }; + return ioste; +} + +static inline ioste +get_iost_entry(unsigned long iopt_base, unsigned long io_address, unsigned page_size) +{ + unsigned long ps; + unsigned long iostep; + unsigned long nnpt; + unsigned long shift; + + switch (page_size) { + case 0x1000000: + ps = IOST_PS_16M; + nnpt = 0; /* one page per segment */ + shift = 5; /* segment has 16 iopt entries */ + break; + + case 0x100000: + ps = IOST_PS_1M; + nnpt = 0; /* one page per segment */ + shift = 1; /* segment has 256 iopt entries */ + break; + + case 0x10000: + ps = IOST_PS_64K; + nnpt = 0x07; /* 8 pages per io page table */ + shift = 0; /* all entries are used */ + break; + + case 0x1000: + ps = IOST_PS_4K; + nnpt = 0x7f; /* 128 pages per io page table */ + shift = 0; /* all entries are used */ + break; + + default: /* not a known compile time constant */ + BUILD_BUG_ON(1); + break; + } + + iostep = iopt_base + + /* need 8 bytes per iopte */ + (((io_address / page_size * 8) + /* align io page tables on 4k page boundaries */ + << shift) + /* nnpt+1 pages go into each iopt */ + & ~(nnpt << 12)); + + nnpt++; /* this seems to work, but the documentation is not clear + about wether we put nnpt or nnpt-1 into the ioste bits. + In theory, this can't work for 4k pages. */ + return mk_ioste(IOST_VALID_MASK + | (iostep & IOST_PT_BASE_MASK) + | ((nnpt << 5) & IOST_NNPT_MASK) + | (ps & IOST_PS_MASK)); +} + +/* compute the address of an io pte */ +static inline unsigned long +get_ioptep(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopt_base; + unsigned long page_size; + unsigned long page_number; + unsigned long iopt_offset; + + iopt_base = iost_entry.val & IOST_PT_BASE_MASK; + page_size = iost_entry.val & IOST_PS_MASK; + + /* decode page size to compute page number */ + page_number = (io_address & 0x0fffffff) >> (10 + 2 * page_size); + /* page number is an offset into the io page table */ + iopt_offset = (page_number << 3) & 0x7fff8ul; + return iopt_base + iopt_offset; +} + +/* compute the tag field of the iopt cache entry */ +static inline unsigned long +get_ioc_tag(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopte = get_ioptep(iost_entry, io_address); + + return IOPT_VALID_MASK + | ((iopte & 0x00000000000000ff8ul) >> 3) + | ((iopte & 0x0000003fffffc0000ul) >> 9); +} + +/* compute the hashed 6 bit index for the 4-way associative pte cache */ +static inline unsigned long +get_ioc_hash(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopte = get_ioptep(iost_entry, io_address); + + return ((iopte & 0x000000000000001f8ul) >> 3) + ^ ((iopte & 0x00000000000020000ul) >> 17) + ^ ((iopte & 0x00000000000010000ul) >> 15) + ^ ((iopte & 0x00000000000008000ul) >> 13) + ^ ((iopte & 0x00000000000004000ul) >> 11) + ^ ((iopte & 0x00000000000002000ul) >> 9) + ^ ((iopte & 0x00000000000001000ul) >> 7); +} + +/* same as above, but pretend that we have a simpler 1-way associative + pte cache with an 8 bit index */ +static inline unsigned long +get_ioc_hash_1way(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopte = get_ioptep(iost_entry, io_address); + + return ((iopte & 0x000000000000001f8ul) >> 3) + ^ ((iopte & 0x00000000000020000ul) >> 17) + ^ ((iopte & 0x00000000000010000ul) >> 15) + ^ ((iopte & 0x00000000000008000ul) >> 13) + ^ ((iopte & 0x00000000000004000ul) >> 11) + ^ ((iopte & 0x00000000000002000ul) >> 9) + ^ ((iopte & 0x00000000000001000ul) >> 7) + ^ ((iopte & 0x0000000000000c000ul) >> 8); +} + +static inline ioste +get_iost_cache(void __iomem *base, unsigned long index) +{ + unsigned long __iomem *p = (base + IOC_ST_CACHE_DIR); + return mk_ioste(in_be64(&p[index])); +} + +static inline void +set_iost_cache(void __iomem *base, unsigned long index, ioste ste) +{ + unsigned long __iomem *p = (base + IOC_ST_CACHE_DIR); + pr_debug("ioste %02lx was %016lx, store %016lx", index, + get_iost_cache(base, index).val, ste.val); + out_be64(&p[index], ste.val); + pr_debug(" now %016lx\n", get_iost_cache(base, index).val); +} + +static inline unsigned long +get_iopt_cache(void __iomem *base, unsigned long index, unsigned long *tag) +{ + unsigned long __iomem *tags = (void *)(base + IOC_PT_CACHE_DIR); + unsigned long __iomem *p = (void *)(base + IOC_PT_CACHE_REG); + + *tag = tags[index]; + rmb(); + return *p; +} + +static inline void +set_iopt_cache(void __iomem *base, unsigned long index, + unsigned long tag, unsigned long val) +{ + unsigned long __iomem *tags = base + IOC_PT_CACHE_DIR; + unsigned long __iomem *p = base + IOC_PT_CACHE_REG; + pr_debug("iopt %02lx was v%016lx/t%016lx, store v%016lx/t%016lx\n", + index, get_iopt_cache(base, index, &oldtag), oldtag, val, tag); + + out_be64(p, val); + out_be64(&tags[index], tag); +} + +static inline void +set_iost_origin(void __iomem *base) +{ + unsigned long __iomem *p = base + IOC_ST_ORIGIN; + unsigned long origin = IOSTO_ENABLE | IOSTO_SW; + + pr_debug("iost_origin %016lx, now %016lx\n", in_be64(p), origin); + out_be64(p, origin); +} + +static inline void +set_iocmd_config(void __iomem *base) +{ + unsigned long __iomem *p = base + 0xc00; + unsigned long conf; + + conf = in_be64(p); + pr_debug("iost_conf %016lx, now %016lx\n", conf, conf | IOCMD_CONF_TE); + out_be64(p, conf | IOCMD_CONF_TE); +} + +/* FIXME: get these from the device tree */ +#define ioc_base 0x20000511000ull +#define ioc_mmio_base 0x20000510000ull +#define ioid 0x48a +#define iopt_phys_offset (- 0x20000000) /* We have a 512MB offset from the SB */ +#define io_page_size 0x1000000 + +static unsigned long map_iopt_entry(unsigned long address) +{ + switch (address >> 20) { + case 0x600: + address = 0x24020000000ull; /* spider i/o */ + break; + default: + address += iopt_phys_offset; + break; + } + + return get_iopt_entry(address, ioid, IOPT_PROT_RW); +} + +static void iommu_bus_setup_null(struct pci_bus *b) { } +static void iommu_dev_setup_null(struct pci_dev *d) { } + +/* initialize the iommu to support a simple linear mapping + * for each DMA window used by any device. For now, we + * happen to know that there is only one DMA window in use, + * starting at iopt_phys_offset. */ +static void bpa_map_iommu(void) +{ + unsigned long address; + void __iomem *base; + ioste ioste; + unsigned long index; + + base = __ioremap(ioc_base, 0x1000, _PAGE_NO_CACHE); + pr_debug("%lx mapped to %p\n", ioc_base, base); + set_iocmd_config(base); + iounmap(base); + + base = __ioremap(ioc_mmio_base, 0x1000, _PAGE_NO_CACHE); + pr_debug("%lx mapped to %p\n", ioc_mmio_base, base); + + set_iost_origin(base); + + for (address = 0; address < 0x100000000ul; address += io_page_size) { + ioste = get_iost_entry(0x10000000000ul, address, io_page_size); + if ((address & 0xfffffff) == 0) /* segment start */ + set_iost_cache(base, address >> 28, ioste); + index = get_ioc_hash_1way(ioste, address); + pr_debug("addr %08lx, index %02lx, ioste %016lx\n", + address, index, ioste.val); + set_iopt_cache(base, + get_ioc_hash_1way(ioste, address), + get_ioc_tag(ioste, address), + map_iopt_entry(address)); + } + iounmap(base); +} + + +static void *bpa_alloc_coherent(struct device *hwdev, size_t size, + dma_addr_t *dma_handle, unsigned int __nocast flag) +{ + void *ret; + + ret = (void *)__get_free_pages(flag, get_order(size)); + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = virt_to_abs(ret) | BPA_DMA_VALID; + } + return ret; +} + +static void bpa_free_coherent(struct device *hwdev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + free_pages((unsigned long)vaddr, get_order(size)); +} + +static dma_addr_t bpa_map_single(struct device *hwdev, void *ptr, + size_t size, enum dma_data_direction direction) +{ + return virt_to_abs(ptr) | BPA_DMA_VALID; +} + +static void bpa_unmap_single(struct device *hwdev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) +{ +} + +static int bpa_map_sg(struct device *hwdev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + int i; + + for (i = 0; i < nents; i++, sg++) { + sg->dma_address = (page_to_phys(sg->page) + sg->offset) + | BPA_DMA_VALID; + sg->dma_length = sg->length; + } + + return nents; +} + +static void bpa_unmap_sg(struct device *hwdev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ +} + +static int bpa_dma_supported(struct device *dev, u64 mask) +{ + return mask < 0x100000000ull; +} + +void bpa_init_iommu(void) +{ + bpa_map_iommu(); + + /* Direct I/O, IOMMU off */ + ppc_md.iommu_dev_setup = iommu_dev_setup_null; + ppc_md.iommu_bus_setup = iommu_bus_setup_null; + + pci_dma_ops.alloc_coherent = bpa_alloc_coherent; + pci_dma_ops.free_coherent = bpa_free_coherent; + pci_dma_ops.map_single = bpa_map_single; + pci_dma_ops.unmap_single = bpa_unmap_single; + pci_dma_ops.map_sg = bpa_map_sg; + pci_dma_ops.unmap_sg = bpa_unmap_sg; + pci_dma_ops.dma_supported = bpa_dma_supported; +} diff --git a/arch/ppc64/kernel/bpa_iommu.h b/arch/ppc64/kernel/bpa_iommu.h new file mode 100644 index 000000000000..e547d77dfa04 --- /dev/null +++ b/arch/ppc64/kernel/bpa_iommu.h @@ -0,0 +1,65 @@ +#ifndef BPA_IOMMU_H +#define BPA_IOMMU_H + +/* some constants */ +enum { + /* segment table entries */ + IOST_VALID_MASK = 0x8000000000000000ul, + IOST_TAG_MASK = 0x3000000000000000ul, + IOST_PT_BASE_MASK = 0x000003fffffff000ul, + IOST_NNPT_MASK = 0x0000000000000fe0ul, + IOST_PS_MASK = 0x000000000000000ful, + + IOST_PS_4K = 0x1, + IOST_PS_64K = 0x3, + IOST_PS_1M = 0x5, + IOST_PS_16M = 0x7, + + /* iopt tag register */ + IOPT_VALID_MASK = 0x0000000200000000ul, + IOPT_TAG_MASK = 0x00000001fffffffful, + + /* iopt cache register */ + IOPT_PROT_MASK = 0xc000000000000000ul, + IOPT_PROT_NONE = 0x0000000000000000ul, + IOPT_PROT_READ = 0x4000000000000000ul, + IOPT_PROT_WRITE = 0x8000000000000000ul, + IOPT_PROT_RW = 0xc000000000000000ul, + IOPT_COHERENT = 0x2000000000000000ul, + + IOPT_ORDER_MASK = 0x1800000000000000ul, + /* order access to same IOID/VC on same address */ + IOPT_ORDER_ADDR = 0x0800000000000000ul, + /* similar, but only after a write access */ + IOPT_ORDER_WRITES = 0x1000000000000000ul, + /* Order all accesses to same IOID/VC */ + IOPT_ORDER_VC = 0x1800000000000000ul, + + IOPT_RPN_MASK = 0x000003fffffff000ul, + IOPT_HINT_MASK = 0x0000000000000800ul, + IOPT_IOID_MASK = 0x00000000000007fful, + + IOSTO_ENABLE = 0x8000000000000000ul, + IOSTO_ORIGIN = 0x000003fffffff000ul, + IOSTO_HW = 0x0000000000000800ul, + IOSTO_SW = 0x0000000000000400ul, + + IOCMD_CONF_TE = 0x0000800000000000ul, + + /* memory mapped registers */ + IOC_PT_CACHE_DIR = 0x000, + IOC_ST_CACHE_DIR = 0x800, + IOC_PT_CACHE_REG = 0x910, + IOC_ST_ORIGIN = 0x918, + IOC_CONF = 0x930, + + /* The high bit needs to be set on every DMA address, + only 2GB are addressable */ + BPA_DMA_VALID = 0x80000000, + BPA_DMA_MASK = 0x7fffffff, +}; + + +void bpa_init_iommu(void); + +#endif diff --git a/arch/ppc64/kernel/bpa_nvram.c b/arch/ppc64/kernel/bpa_nvram.c new file mode 100644 index 000000000000..06a119cfceb5 --- /dev/null +++ b/arch/ppc64/kernel/bpa_nvram.c @@ -0,0 +1,118 @@ +/* + * NVRAM for CPBW + * + * (C) Copyright IBM Corp. 2005 + * + * Authors : Utz Bacher <utz.bacher@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#include <asm/machdep.h> +#include <asm/nvram.h> +#include <asm/prom.h> + +static void __iomem *bpa_nvram_start; +static long bpa_nvram_len; +static spinlock_t bpa_nvram_lock = SPIN_LOCK_UNLOCKED; + +static ssize_t bpa_nvram_read(char *buf, size_t count, loff_t *index) +{ + unsigned long flags; + + if (*index >= bpa_nvram_len) + return 0; + if (*index + count > bpa_nvram_len) + count = bpa_nvram_len - *index; + + spin_lock_irqsave(&bpa_nvram_lock, flags); + + memcpy_fromio(buf, bpa_nvram_start + *index, count); + + spin_unlock_irqrestore(&bpa_nvram_lock, flags); + + *index += count; + return count; +} + +static ssize_t bpa_nvram_write(char *buf, size_t count, loff_t *index) +{ + unsigned long flags; + + if (*index >= bpa_nvram_len) + return 0; + if (*index + count > bpa_nvram_len) + count = bpa_nvram_len - *index; + + spin_lock_irqsave(&bpa_nvram_lock, flags); + + memcpy_toio(bpa_nvram_start + *index, buf, count); + + spin_unlock_irqrestore(&bpa_nvram_lock, flags); + + *index += count; + return count; +} + +static ssize_t bpa_nvram_get_size(void) +{ + return bpa_nvram_len; +} + +int __init bpa_nvram_init(void) +{ + struct device_node *nvram_node; + unsigned long *buffer; + int proplen; + unsigned long nvram_addr; + int ret; + + ret = -ENODEV; + nvram_node = of_find_node_by_type(NULL, "nvram"); + if (!nvram_node) + goto out; + + ret = -EIO; + buffer = (unsigned long *)get_property(nvram_node, "reg", &proplen); + if (proplen != 2*sizeof(unsigned long)) + goto out; + + ret = -ENODEV; + nvram_addr = buffer[0]; + bpa_nvram_len = buffer[1]; + if ( (!bpa_nvram_len) || (!nvram_addr) ) + goto out; + + bpa_nvram_start = ioremap(nvram_addr, bpa_nvram_len); + if (!bpa_nvram_start) + goto out; + + printk(KERN_INFO "BPA NVRAM, %luk mapped to %p\n", + bpa_nvram_len >> 10, bpa_nvram_start); + + ppc_md.nvram_read = bpa_nvram_read; + ppc_md.nvram_write = bpa_nvram_write; + ppc_md.nvram_size = bpa_nvram_get_size; + +out: + of_node_put(nvram_node); + return ret; +} diff --git a/arch/ppc64/kernel/bpa_setup.c b/arch/ppc64/kernel/bpa_setup.c new file mode 100644 index 000000000000..57b3db66f458 --- /dev/null +++ b/arch/ppc64/kernel/bpa_setup.c @@ -0,0 +1,140 @@ +/* + * linux/arch/ppc/kernel/bpa_setup.c + * + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + * Modified by PPC64 Team, IBM Corp + * Modified by BPA Team, IBM Deutschland Entwicklung GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#undef DEBUG + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/slab.h> +#include <linux/user.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/console.h> + +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/rtas.h> +#include <asm/pci-bridge.h> +#include <asm/iommu.h> +#include <asm/dma.h> +#include <asm/machdep.h> +#include <asm/time.h> +#include <asm/nvram.h> +#include <asm/cputable.h> + +#include "pci.h" +#include "bpa_iic.h" +#include "bpa_iommu.h" + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +void bpa_get_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *model = ""; + + root = of_find_node_by_path("/"); + if (root) + model = get_property(root, "model", NULL); + seq_printf(m, "machine\t\t: BPA %s\n", model); + of_node_put(root); +} + +static void bpa_progress(char *s, unsigned short hex) +{ + printk("*** %04x : %s\n", hex, s ? s : ""); +} + +static void __init bpa_setup_arch(void) +{ + ppc_md.init_IRQ = iic_init_IRQ; + ppc_md.get_irq = iic_get_irq; + +#ifdef CONFIG_SMP + smp_init_pSeries(); +#endif + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000; + + if (ROOT_DEV == 0) { + printk("No ramdisk, default root is /dev/hda2\n"); + ROOT_DEV = Root_HDA2; + } + + /* Find and initialize PCI host bridges */ + init_pci_config_tokens(); + find_and_init_phbs(); + spider_init_IRQ(); +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif + + bpa_nvram_init(); +} + +/* + * Early initialization. Relocation is on but do not reference unbolted pages + */ +static void __init bpa_init_early(void) +{ + DBG(" -> bpa_init_early()\n"); + + hpte_init_native(); + + bpa_init_iommu(); + + ppc64_interrupt_controller = IC_BPA_IIC; + + DBG(" <- bpa_init_early()\n"); +} + + +static int __init bpa_probe(int platform) +{ + if (platform != PLATFORM_BPA) + return 0; + + return 1; +} + +struct machdep_calls __initdata bpa_md = { + .probe = bpa_probe, + .setup_arch = bpa_setup_arch, + .init_early = bpa_init_early, + .get_cpuinfo = bpa_get_cpuinfo, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .get_boot_time = rtas_get_boot_time, + .get_rtc_time = rtas_get_rtc_time, + .set_rtc_time = rtas_set_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .progress = bpa_progress, +}; diff --git a/arch/ppc64/kernel/cpu_setup_power4.S b/arch/ppc64/kernel/cpu_setup_power4.S index 3bd951820850..0482c063c26e 100644 --- a/arch/ppc64/kernel/cpu_setup_power4.S +++ b/arch/ppc64/kernel/cpu_setup_power4.S @@ -31,10 +31,13 @@ _GLOBAL(__970_cpu_preinit) */ mfspr r0,SPRN_PVR srwi r0,r0,16 - cmpwi cr0,r0,0x39 - cmpwi cr1,r0,0x3c - cror 4*cr0+eq,4*cr0+eq,4*cr1+eq + cmpwi r0,0x39 + beq 1f + cmpwi r0,0x3c + beq 1f + cmpwi r0,0x44 bnelr +1: /* Make sure HID4:rm_ci is off before MMU is turned off, that large * pages are enabled with HID4:61 and clear HID5:DCBZ_size and @@ -73,7 +76,21 @@ _GLOBAL(__970_cpu_preinit) _GLOBAL(__setup_cpu_power4) blr - + +_GLOBAL(__setup_cpu_be) + /* Set large page sizes LP=0: 16MB, LP=1: 64KB */ + addi r3, 0, 0 + ori r3, r3, HID6_LB + sldi r3, r3, 32 + nor r3, r3, r3 + mfspr r4, SPRN_HID6 + and r4, r4, r3 + addi r3, 0, 0x02000 + sldi r3, r3, 32 + or r4, r4, r3 + mtspr SPRN_HID6, r4 + blr + _GLOBAL(__setup_cpu_ppc970) mfspr r0,SPRN_HID0 li r11,5 /* clear DOZE and SLEEP */ @@ -119,12 +136,14 @@ _GLOBAL(__save_cpu_setup) /* We only deal with 970 for now */ mfspr r0,SPRN_PVR srwi r0,r0,16 - cmpwi cr0,r0,0x39 - cmpwi cr1,r0,0x3c - cror 4*cr0+eq,4*cr0+eq,4*cr1+eq - bne 1f - - /* Save HID0,1,4 and 5 */ + cmpwi r0,0x39 + beq 1f + cmpwi r0,0x3c + beq 1f + cmpwi r0,0x44 + bne 2f + +1: /* Save HID0,1,4 and 5 */ mfspr r3,SPRN_HID0 std r3,CS_HID0(r5) mfspr r3,SPRN_HID1 @@ -134,7 +153,7 @@ _GLOBAL(__save_cpu_setup) mfspr r3,SPRN_HID5 std r3,CS_HID5(r5) -1: +2: mtcr r7 blr @@ -151,12 +170,14 @@ _GLOBAL(__restore_cpu_setup) /* We only deal with 970 for now */ mfspr r0,SPRN_PVR srwi r0,r0,16 - cmpwi cr0,r0,0x39 - cmpwi cr1,r0,0x3c - cror 4*cr0+eq,4*cr0+eq,4*cr1+eq - bne 1f + cmpwi r0,0x39 + beq 1f + cmpwi r0,0x3c + beq 1f + cmpwi r0,0x44 + bnelr - /* Before accessing memory, we make sure rm_ci is clear */ +1: /* Before accessing memory, we make sure rm_ci is clear */ li r0,0 mfspr r3,SPRN_HID4 rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */ @@ -209,6 +230,5 @@ _GLOBAL(__restore_cpu_setup) mtspr SPRN_HID5,r3 sync isync -1: blr diff --git a/arch/ppc64/kernel/cputable.c b/arch/ppc64/kernel/cputable.c index 8644a8648058..77cec42f9525 100644 --- a/arch/ppc64/kernel/cputable.c +++ b/arch/ppc64/kernel/cputable.c @@ -34,6 +34,7 @@ EXPORT_SYMBOL(cur_cpu_spec); extern void __setup_cpu_power3(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_power4(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); +extern void __setup_cpu_be(unsigned long offset, struct cpu_spec* spec); /* We only set the altivec features if the kernel was compiled with altivec @@ -48,150 +49,234 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); #endif struct cpu_spec cpu_specs[] = { - { /* Power3 */ - 0xffff0000, 0x00400000, "POWER3 (630)", - CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | - CPU_FTR_IABR | CPU_FTR_PMC8, - COMMON_USER_PPC64, - 128, 128, - __setup_cpu_power3, - COMMON_PPC64_FW - }, - { /* Power3+ */ - 0xffff0000, 0x00410000, "POWER3 (630+)", - CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | - CPU_FTR_IABR | CPU_FTR_PMC8, - COMMON_USER_PPC64, - 128, 128, - __setup_cpu_power3, - COMMON_PPC64_FW - }, - { /* Northstar */ - 0xffff0000, 0x00330000, "RS64-II (northstar)", - CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | - CPU_FTR_IABR | CPU_FTR_PMC8 | CPU_FTR_MMCRA, - COMMON_USER_PPC64, - 128, 128, - __setup_cpu_power3, - COMMON_PPC64_FW - }, - { /* Pulsar */ - 0xffff0000, 0x00340000, "RS64-III (pulsar)", - CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | - CPU_FTR_IABR | CPU_FTR_PMC8 | CPU_FTR_MMCRA, - COMMON_USER_PPC64, - 128, 128, - __setup_cpu_power3, - COMMON_PPC64_FW - }, - { /* I-star */ - 0xffff0000, 0x00360000, "RS64-III (icestar)", - CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | - CPU_FTR_IABR | CPU_FTR_PMC8 | CPU_FTR_MMCRA, - COMMON_USER_PPC64, - 128, 128, - __setup_cpu_power3, - COMMON_PPC64_FW - }, - { /* S-star */ - 0xffff0000, 0x00370000, "RS64-IV (sstar)", - CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | - CPU_FTR_IABR | CPU_FTR_PMC8 | CPU_FTR_MMCRA, - COMMON_USER_PPC64, - 128, 128, - __setup_cpu_power3, - COMMON_PPC64_FW - }, - { /* Power4 */ - 0xffff0000, 0x00350000, "POWER4 (gp)", - CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | - CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_PMC8 | CPU_FTR_MMCRA, - COMMON_USER_PPC64, - 128, 128, - __setup_cpu_power4, - COMMON_PPC64_FW - }, - { /* Power4+ */ - 0xffff0000, 0x00380000, "POWER4+ (gq)", - CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | - CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_PMC8 | CPU_FTR_MMCRA, - COMMON_USER_PPC64, - 128, 128, - __setup_cpu_power4, - COMMON_PPC64_FW - }, - { /* PPC970 */ - 0xffff0000, 0x00390000, "PPC970", - CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | - CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | - CPU_FTR_CAN_NAP | CPU_FTR_PMC8 | CPU_FTR_MMCRA, - COMMON_USER_PPC64 | PPC_FEATURE_HAS_ALTIVEC_COMP, - 128, 128, - __setup_cpu_ppc970, - COMMON_PPC64_FW - }, - { /* PPC970FX */ - 0xffff0000, 0x003c0000, "PPC970FX", - CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | - CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | - CPU_FTR_CAN_NAP | CPU_FTR_PMC8 | CPU_FTR_MMCRA, - COMMON_USER_PPC64 | PPC_FEATURE_HAS_ALTIVEC_COMP, - 128, 128, - __setup_cpu_ppc970, - COMMON_PPC64_FW - }, - { /* Power5 */ - 0xffff0000, 0x003a0000, "POWER5 (gr)", - CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | - CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA | CPU_FTR_SMT | - CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | - CPU_FTR_MMCRA_SIHV, - COMMON_USER_PPC64, - 128, 128, - __setup_cpu_power4, - COMMON_PPC64_FW - }, - { /* Power5 */ - 0xffff0000, 0x003b0000, "POWER5 (gs)", - CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | - CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA | CPU_FTR_SMT | - CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | - CPU_FTR_MMCRA_SIHV, - COMMON_USER_PPC64, - 128, 128, - __setup_cpu_power4, - COMMON_PPC64_FW - }, - { /* default match */ - 0x00000000, 0x00000000, "POWER4 (compatible)", - CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | - CPU_FTR_PPCAS_ARCH_V2, - COMMON_USER_PPC64, - 128, 128, - __setup_cpu_power4, - COMMON_PPC64_FW - } + { /* Power3 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x00400000, + .cpu_name = "POWER3 (630)", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | + CPU_FTR_PMC8, + .cpu_user_features = COMMON_USER_PPC64, + .icache_bsize = 128, + .dcache_bsize = 128, + .cpu_setup = __setup_cpu_power3, + .firmware_features = COMMON_PPC64_FW, + }, + { /* Power3+ */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x00410000, + .cpu_name = "POWER3 (630+)", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | + CPU_FTR_PMC8, + .cpu_user_features = COMMON_USER_PPC64, + .icache_bsize = 128, + .dcache_bsize = 128, + .cpu_setup = __setup_cpu_power3, + .firmware_features = COMMON_PPC64_FW, + }, + { /* Northstar */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x00330000, + .cpu_name = "RS64-II (northstar)", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | + CPU_FTR_PMC8 | CPU_FTR_MMCRA | CPU_FTR_CTRL, + .cpu_user_features = COMMON_USER_PPC64, + .icache_bsize = 128, + .dcache_bsize = 128, + .cpu_setup = __setup_cpu_power3, + .firmware_features = COMMON_PPC64_FW, + }, + { /* Pulsar */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x00340000, + .cpu_name = "RS64-III (pulsar)", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | + CPU_FTR_PMC8 | CPU_FTR_MMCRA | CPU_FTR_CTRL, + .cpu_user_features = COMMON_USER_PPC64, + .icache_bsize = 128, + .dcache_bsize = 128, + .cpu_setup = __setup_cpu_power3, + .firmware_features = COMMON_PPC64_FW, + }, + { /* I-star */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x00360000, + .cpu_name = "RS64-III (icestar)", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | + CPU_FTR_PMC8 | CPU_FTR_MMCRA | CPU_FTR_CTRL, + .cpu_user_features = COMMON_USER_PPC64, + .icache_bsize = 128, + .dcache_bsize = 128, + .cpu_setup = __setup_cpu_power3, + .firmware_features = COMMON_PPC64_FW, + }, + { /* S-star */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x00370000, + .cpu_name = "RS64-IV (sstar)", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | + CPU_FTR_PMC8 | CPU_FTR_MMCRA | CPU_FTR_CTRL, + .cpu_user_features = COMMON_USER_PPC64, + .icache_bsize = 128, + .dcache_bsize = 128, + .cpu_setup = __setup_cpu_power3, + .firmware_features = COMMON_PPC64_FW, + }, + { /* Power4 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x00350000, + .cpu_name = "POWER4 (gp)", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_PMC8 | CPU_FTR_MMCRA, + .cpu_user_features = COMMON_USER_PPC64, + .icache_bsize = 128, + .dcache_bsize = 128, + .cpu_setup = __setup_cpu_power4, + .firmware_features = COMMON_PPC64_FW, + }, + { /* Power4+ */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x00380000, + .cpu_name = "POWER4+ (gq)", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_PMC8 | CPU_FTR_MMCRA, + .cpu_user_features = COMMON_USER_PPC64, + .icache_bsize = 128, + .dcache_bsize = 128, + .cpu_setup = __setup_cpu_power4, + .firmware_features = COMMON_PPC64_FW, + }, + { /* PPC970 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x00390000, + .cpu_name = "PPC970", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | + CPU_FTR_CAN_NAP | CPU_FTR_PMC8 | CPU_FTR_MMCRA, + .cpu_user_features = COMMON_USER_PPC64 | + PPC_FEATURE_HAS_ALTIVEC_COMP, + .icache_bsize = 128, + .dcache_bsize = 128, + .cpu_setup = __setup_cpu_ppc970, + .firmware_features = COMMON_PPC64_FW, + }, + { /* PPC970FX */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x003c0000, + .cpu_name = "PPC970FX", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | + CPU_FTR_CAN_NAP | CPU_FTR_PMC8 | CPU_FTR_MMCRA, + .cpu_user_features = COMMON_USER_PPC64 | + PPC_FEATURE_HAS_ALTIVEC_COMP, + .icache_bsize = 128, + .dcache_bsize = 128, + .cpu_setup = __setup_cpu_ppc970, + .firmware_features = COMMON_PPC64_FW, + }, + { /* PPC970MP */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x00440000, + .cpu_name = "PPC970MP", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | + CPU_FTR_CAN_NAP | CPU_FTR_PMC8 | CPU_FTR_MMCRA, + .cpu_user_features = COMMON_USER_PPC64 | + PPC_FEATURE_HAS_ALTIVEC_COMP, + .icache_bsize = 128, + .dcache_bsize = 128, + .cpu_setup = __setup_cpu_ppc970, + .firmware_features = COMMON_PPC64_FW, + }, + { /* Power5 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x003a0000, + .cpu_name = "POWER5 (gr)", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA | CPU_FTR_SMT | + CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | + CPU_FTR_MMCRA_SIHV, + .cpu_user_features = COMMON_USER_PPC64, + .icache_bsize = 128, + .dcache_bsize = 128, + .cpu_setup = __setup_cpu_power4, + .firmware_features = COMMON_PPC64_FW, + }, + { /* Power5 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x003b0000, + .cpu_name = "POWER5 (gs)", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA | CPU_FTR_SMT | + CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | + CPU_FTR_MMCRA_SIHV, + .cpu_user_features = COMMON_USER_PPC64, + .icache_bsize = 128, + .dcache_bsize = 128, + .cpu_setup = __setup_cpu_power4, + .firmware_features = COMMON_PPC64_FW, + }, + { /* BE DD1.x */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x00700000, + .cpu_name = "Broadband Engine", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | + CPU_FTR_SMT, + .cpu_user_features = COMMON_USER_PPC64 | + PPC_FEATURE_HAS_ALTIVEC_COMP, + .icache_bsize = 128, + .dcache_bsize = 128, + .cpu_setup = __setup_cpu_be, + .firmware_features = COMMON_PPC64_FW, + }, + { /* default match */ + .pvr_mask = 0x00000000, + .pvr_value = 0x00000000, + .cpu_name = "POWER4 (compatible)", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | + CPU_FTR_PPCAS_ARCH_V2, + .cpu_user_features = COMMON_USER_PPC64, + .icache_bsize = 128, + .dcache_bsize = 128, + .cpu_setup = __setup_cpu_power4, + .firmware_features = COMMON_PPC64_FW, + } }; firmware_feature_t firmware_features_table[FIRMWARE_MAX_FEATURES] = { - {FW_FEATURE_PFT, "hcall-pft"}, - {FW_FEATURE_TCE, "hcall-tce"}, - {FW_FEATURE_SPRG0, "hcall-sprg0"}, - {FW_FEATURE_DABR, "hcall-dabr"}, - {FW_FEATURE_COPY, "hcall-copy"}, - {FW_FEATURE_ASR, "hcall-asr"}, - {FW_FEATURE_DEBUG, "hcall-debug"}, - {FW_FEATURE_PERF, "hcall-perf"}, - {FW_FEATURE_DUMP, "hcall-dump"}, - {FW_FEATURE_INTERRUPT, "hcall-interrupt"}, - {FW_FEATURE_MIGRATE, "hcall-migrate"}, - {FW_FEATURE_PERFMON, "hcall-perfmon"}, - {FW_FEATURE_CRQ, "hcall-crq"}, - {FW_FEATURE_VIO, "hcall-vio"}, - {FW_FEATURE_RDMA, "hcall-rdma"}, - {FW_FEATURE_LLAN, "hcall-lLAN"}, - {FW_FEATURE_BULK, "hcall-bulk"}, - {FW_FEATURE_XDABR, "hcall-xdabr"}, - {FW_FEATURE_MULTITCE, "hcall-multi-tce"}, - {FW_FEATURE_SPLPAR, "hcall-splpar"}, + {FW_FEATURE_PFT, "hcall-pft"}, + {FW_FEATURE_TCE, "hcall-tce"}, + {FW_FEATURE_SPRG0, "hcall-sprg0"}, + {FW_FEATURE_DABR, "hcall-dabr"}, + {FW_FEATURE_COPY, "hcall-copy"}, + {FW_FEATURE_ASR, "hcall-asr"}, + {FW_FEATURE_DEBUG, "hcall-debug"}, + {FW_FEATURE_PERF, "hcall-perf"}, + {FW_FEATURE_DUMP, "hcall-dump"}, + {FW_FEATURE_INTERRUPT, "hcall-interrupt"}, + {FW_FEATURE_MIGRATE, "hcall-migrate"}, + {FW_FEATURE_PERFMON, "hcall-perfmon"}, + {FW_FEATURE_CRQ, "hcall-crq"}, + {FW_FEATURE_VIO, "hcall-vio"}, + {FW_FEATURE_RDMA, "hcall-rdma"}, + {FW_FEATURE_LLAN, "hcall-lLAN"}, + {FW_FEATURE_BULK, "hcall-bulk"}, + {FW_FEATURE_XDABR, "hcall-xdabr"}, + {FW_FEATURE_MULTITCE, "hcall-multi-tce"}, + {FW_FEATURE_SPLPAR, "hcall-splpar"}, }; diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S index 02c8f4e3e4bc..784f56d4684c 100644 --- a/arch/ppc64/kernel/head.S +++ b/arch/ppc64/kernel/head.S @@ -308,6 +308,7 @@ exception_marker: label##_pSeries: \ HMT_MEDIUM; \ mtspr SPRG1,r13; /* save r13 */ \ + RUNLATCH_ON(r13); \ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) #define STD_EXCEPTION_ISERIES(n, label, area) \ @@ -315,6 +316,7 @@ label##_pSeries: \ label##_iSeries: \ HMT_MEDIUM; \ mtspr SPRG1,r13; /* save r13 */ \ + RUNLATCH_ON(r13); \ EXCEPTION_PROLOG_ISERIES_1(area); \ EXCEPTION_PROLOG_ISERIES_2; \ b label##_common @@ -324,6 +326,7 @@ label##_iSeries: \ label##_iSeries: \ HMT_MEDIUM; \ mtspr SPRG1,r13; /* save r13 */ \ + RUNLATCH_ON(r13); \ EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \ lbz r10,PACAPROCENABLED(r13); \ cmpwi 0,r10,0; \ @@ -393,6 +396,7 @@ __start_interrupts: _machine_check_pSeries: HMT_MEDIUM mtspr SPRG1,r13 /* save r13 */ + RUNLATCH_ON(r13) EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) . = 0x300 @@ -419,6 +423,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) data_access_slb_pSeries: HMT_MEDIUM mtspr SPRG1,r13 + RUNLATCH_ON(r13) mfspr r13,SPRG3 /* get paca address into r13 */ std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ std r10,PACA_EXSLB+EX_R10(r13) @@ -439,6 +444,7 @@ data_access_slb_pSeries: instruction_access_slb_pSeries: HMT_MEDIUM mtspr SPRG1,r13 + RUNLATCH_ON(r13) mfspr r13,SPRG3 /* get paca address into r13 */ std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ std r10,PACA_EXSLB+EX_R10(r13) @@ -464,6 +470,7 @@ instruction_access_slb_pSeries: .globl system_call_pSeries system_call_pSeries: HMT_MEDIUM + RUNLATCH_ON(r9) mr r9,r13 mfmsr r10 mfspr r13,SPRG3 @@ -515,36 +522,9 @@ __end_interrupts: #ifdef CONFIG_PPC_ISERIES .globl naca naca: - .llong itVpdAreas - - /* - * The iSeries LPAR map is at this fixed address - * so that the HvReleaseData structure can address - * it with a 32-bit offset. - * - * The VSID values below are dependent on the - * VSID generation algorithm. See include/asm/mmu_context.h. - */ - - . = 0x4800 - - .llong 2 /* # ESIDs to be mapped by hypervisor */ - .llong 1 /* # memory ranges to be mapped by hypervisor */ - .llong STAB0_PAGE /* Page # of segment table within load area */ - .llong 0 /* Reserved */ - .llong 0 /* Reserved */ - .llong 0 /* Reserved */ - .llong 0 /* Reserved */ - .llong 0 /* Reserved */ - .llong (KERNELBASE>>SID_SHIFT) - .llong 0x408f92c94 /* KERNELBASE VSID */ - /* We have to list the bolted VMALLOC segment here, too, so that it - * will be restored on shared processor switch */ - .llong (VMALLOCBASE>>SID_SHIFT) - .llong 0xf09b89af5 /* VMALLOCBASE VSID */ - .llong 8192 /* # pages to map (32 MB) */ - .llong 0 /* Offset from start of loadarea to start of map */ - .llong 0x408f92c940000 /* VPN of first page to map */ + .llong itVpdAreas + .llong 0 /* xRamDisk */ + .llong 0 /* xRamDiskSize */ . = 0x6100 @@ -707,11 +687,13 @@ fwnmi_data_area: system_reset_fwnmi: HMT_MEDIUM mtspr SPRG1,r13 /* save r13 */ + RUNLATCH_ON(r13) EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) .globl machine_check_fwnmi machine_check_fwnmi: HMT_MEDIUM mtspr SPRG1,r13 /* save r13 */ + RUNLATCH_ON(r13) EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) /* @@ -848,6 +830,7 @@ unrecov_fer: .align 7 .globl data_access_common data_access_common: + RUNLATCH_ON(r10) /* It wont fit in the 0x300 handler */ mfspr r10,DAR std r10,PACA_EXGEN+EX_DAR(r13) mfspr r10,DSISR @@ -1194,7 +1177,7 @@ _GLOBAL(pSeries_secondary_smp_init) bl .__restore_cpu_setup /* Set up a paca value for this processor. Since we have the - * physical cpu id in r3, we need to search the pacas to find + * physical cpu id in r24, we need to search the pacas to find * which logical id maps to our physical one. */ LOADADDR(r13, paca) /* Get base vaddr of paca array */ @@ -1207,8 +1190,8 @@ _GLOBAL(pSeries_secondary_smp_init) cmpwi r5,NR_CPUS blt 1b -99: HMT_LOW /* Couldn't find our CPU id */ - b 99b + mr r3,r24 /* not found, copy phys to r3 */ + b .kexec_wait /* next kernel might do better */ 2: mtspr SPRG3,r13 /* Save vaddr of paca in SPRG3 */ /* From now on, r24 is expected to be logica cpuid */ @@ -2088,7 +2071,7 @@ _GLOBAL(hmt_start_secondary) blr #endif -#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES) +#if defined(CONFIG_KEXEC) || (defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES)) _GLOBAL(smp_release_cpus) /* All secondary cpus are spinning on a common * spinloop, release them all now so they can start @@ -2121,13 +2104,6 @@ empty_zero_page: swapper_pg_dir: .space 4096 -#ifdef CONFIG_SMP -/* 1 page segment table per cpu (max 48, cpu0 allocated at STAB0_PHYS_ADDR) */ - .globl stab_array -stab_array: - .space 4096 * 48 -#endif - /* * This space gets a copy of optional info passed to us by the bootstrap * Used to pass parameters into the kernel like root=/dev/sda1, etc. diff --git a/arch/ppc64/kernel/hvconsole.c b/arch/ppc64/kernel/hvconsole.c index c72fb8ffe974..138e128a3886 100644 --- a/arch/ppc64/kernel/hvconsole.c +++ b/arch/ppc64/kernel/hvconsole.c @@ -27,7 +27,6 @@ #include <linux/module.h> #include <asm/hvcall.h> #include <asm/hvconsole.h> -#include <asm/prom.h> /** * hvc_get_chars - retrieve characters from firmware for denoted vterm adatper @@ -42,29 +41,14 @@ int hvc_get_chars(uint32_t vtermno, char *buf, int count) unsigned long got; if (plpar_hcall(H_GET_TERM_CHAR, vtermno, 0, 0, 0, &got, - (unsigned long *)buf, (unsigned long *)buf+1) == H_Success) { - /* - * Work around a HV bug where it gives us a null - * after every \r. -- paulus - */ - if (got > 0) { - int i; - for (i = 1; i < got; ++i) { - if (buf[i] == 0 && buf[i-1] == '\r') { - --got; - if (i < got) - memmove(&buf[i], &buf[i+1], - got - i); - } - } - } + (unsigned long *)buf, (unsigned long *)buf+1) == H_Success) return got; - } return 0; } EXPORT_SYMBOL(hvc_get_chars); + /** * hvc_put_chars: send characters to firmware for denoted vterm adapter * @vtermno: The vtermno or unit_address of the adapter from which the data @@ -88,34 +72,3 @@ int hvc_put_chars(uint32_t vtermno, const char *buf, int count) } EXPORT_SYMBOL(hvc_put_chars); - -/* - * We hope/assume that the first vty found corresponds to the first console - * device. - */ -int hvc_find_vtys(void) -{ - struct device_node *vty; - int num_found = 0; - - for (vty = of_find_node_by_name(NULL, "vty"); vty != NULL; - vty = of_find_node_by_name(vty, "vty")) { - uint32_t *vtermno; - - /* We have statically defined space for only a certain number of - * console adapters. */ - if (num_found >= MAX_NR_HVC_CONSOLES) - break; - - vtermno = (uint32_t *)get_property(vty, "reg", NULL); - if (!vtermno) - continue; - - if (device_is_compatible(vty, "hvterm1")) { - hvc_instantiate(*vtermno, num_found); - ++num_found; - } - } - - return num_found; -} diff --git a/arch/ppc64/kernel/iSeries_htab.c b/arch/ppc64/kernel/iSeries_htab.c index aa9e8fdd1a4f..b0250ae4a72a 100644 --- a/arch/ppc64/kernel/iSeries_htab.c +++ b/arch/ppc64/kernel/iSeries_htab.c @@ -38,11 +38,12 @@ static inline void iSeries_hunlock(unsigned long slot) } static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va, - unsigned long prpn, int secondary, - unsigned long hpteflags, int bolted, int large) + unsigned long prpn, unsigned long vflags, + unsigned long rflags) { long slot; - HPTE lhpte; + hpte_t lhpte; + int secondary = 0; /* * The hypervisor tries both primary and secondary. @@ -50,13 +51,13 @@ static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va, * it means we have already tried both primary and secondary, * so we return failure immediately. */ - if (secondary) + if (vflags & HPTE_V_SECONDARY) return -1; iSeries_hlock(hpte_group); slot = HvCallHpt_findValid(&lhpte, va >> PAGE_SHIFT); - BUG_ON(lhpte.dw0.dw0.v); + BUG_ON(lhpte.v & HPTE_V_VALID); if (slot == -1) { /* No available entry found in either group */ iSeries_hunlock(hpte_group); @@ -64,19 +65,13 @@ static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va, } if (slot < 0) { /* MSB set means secondary group */ + vflags |= HPTE_V_VALID; secondary = 1; slot &= 0x7fffffffffffffff; } - lhpte.dw1.dword1 = 0; - lhpte.dw1.dw1.rpn = physRpn_to_absRpn(prpn); - lhpte.dw1.flags.flags = hpteflags; - - lhpte.dw0.dword0 = 0; - lhpte.dw0.dw0.avpn = va >> 23; - lhpte.dw0.dw0.h = secondary; - lhpte.dw0.dw0.bolted = bolted; - lhpte.dw0.dw0.v = 1; + lhpte.v = (va >> 23) << HPTE_V_AVPN_SHIFT | vflags | HPTE_V_VALID; + lhpte.r = (physRpn_to_absRpn(prpn) << HPTE_R_RPN_SHIFT) | rflags; /* Now fill in the actual HPTE */ HvCallHpt_addValidate(slot, secondary, &lhpte); @@ -88,20 +83,17 @@ static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va, static unsigned long iSeries_hpte_getword0(unsigned long slot) { - unsigned long dword0; - HPTE hpte; + hpte_t hpte; HvCallHpt_get(&hpte, slot); - dword0 = hpte.dw0.dword0; - - return dword0; + return hpte.v; } static long iSeries_hpte_remove(unsigned long hpte_group) { unsigned long slot_offset; int i; - HPTE lhpte; + unsigned long hpte_v; /* Pick a random slot to start at */ slot_offset = mftb() & 0x7; @@ -109,10 +101,9 @@ static long iSeries_hpte_remove(unsigned long hpte_group) iSeries_hlock(hpte_group); for (i = 0; i < HPTES_PER_GROUP; i++) { - lhpte.dw0.dword0 = - iSeries_hpte_getword0(hpte_group + slot_offset); + hpte_v = iSeries_hpte_getword0(hpte_group + slot_offset); - if (!lhpte.dw0.dw0.bolted) { + if (! (hpte_v & HPTE_V_BOLTED)) { HvCallHpt_invalidateSetSwBitsGet(hpte_group + slot_offset, 0, 0); iSeries_hunlock(hpte_group); @@ -137,13 +128,13 @@ static long iSeries_hpte_remove(unsigned long hpte_group) static long iSeries_hpte_updatepp(unsigned long slot, unsigned long newpp, unsigned long va, int large, int local) { - HPTE hpte; + hpte_t hpte; unsigned long avpn = va >> 23; iSeries_hlock(slot); HvCallHpt_get(&hpte, slot); - if ((hpte.dw0.dw0.avpn == avpn) && (hpte.dw0.dw0.v)) { + if ((HPTE_V_AVPN_VAL(hpte.v) == avpn) && (hpte.v & HPTE_V_VALID)) { /* * Hypervisor expects bits as NPPP, which is * different from how they are mapped in our PP. @@ -167,7 +158,7 @@ static long iSeries_hpte_updatepp(unsigned long slot, unsigned long newpp, */ static long iSeries_hpte_find(unsigned long vpn) { - HPTE hpte; + hpte_t hpte; long slot; /* @@ -177,7 +168,7 @@ static long iSeries_hpte_find(unsigned long vpn) * 0x80000000xxxxxxxx : Entry found in secondary group, slot x */ slot = HvCallHpt_findValid(&hpte, vpn); - if (hpte.dw0.dw0.v) { + if (hpte.v & HPTE_V_VALID) { if (slot < 0) { slot &= 0x7fffffffffffffff; slot = -slot; @@ -212,7 +203,7 @@ static void iSeries_hpte_updateboltedpp(unsigned long newpp, unsigned long ea) static void iSeries_hpte_invalidate(unsigned long slot, unsigned long va, int large, int local) { - HPTE lhpte; + unsigned long hpte_v; unsigned long avpn = va >> 23; unsigned long flags; @@ -220,9 +211,9 @@ static void iSeries_hpte_invalidate(unsigned long slot, unsigned long va, iSeries_hlock(slot); - lhpte.dw0.dword0 = iSeries_hpte_getword0(slot); + hpte_v = iSeries_hpte_getword0(slot); - if ((lhpte.dw0.dw0.avpn == avpn) && lhpte.dw0.dw0.v) + if ((HPTE_V_AVPN_VAL(hpte_v) == avpn) && (hpte_v & HPTE_V_VALID)) HvCallHpt_invalidateSetSwBitsGet(slot, 0, 0); iSeries_hunlock(slot); diff --git a/arch/ppc64/kernel/iSeries_proc.c b/arch/ppc64/kernel/iSeries_proc.c index 356bd9931fcc..0fe3116eba29 100644 --- a/arch/ppc64/kernel/iSeries_proc.c +++ b/arch/ppc64/kernel/iSeries_proc.c @@ -40,50 +40,6 @@ static int __init iseries_proc_create(void) } core_initcall(iseries_proc_create); -static char *event_types[9] = { - "Hypervisor\t\t", - "Machine Facilities\t", - "Session Manager\t", - "SPD I/O\t\t", - "Virtual Bus\t\t", - "PCI I/O\t\t", - "RIO I/O\t\t", - "Virtual Lan\t\t", - "Virtual I/O\t\t" -}; - -static int proc_lpevents_show(struct seq_file *m, void *v) -{ - unsigned int i; - - seq_printf(m, "LpEventQueue 0\n"); - seq_printf(m, " events processed:\t%lu\n", - (unsigned long)xItLpQueue.xLpIntCount); - - for (i = 0; i < 9; ++i) - seq_printf(m, " %s %10lu\n", event_types[i], - (unsigned long)xItLpQueue.xLpIntCountByType[i]); - - seq_printf(m, "\n events processed by processor:\n"); - - for_each_online_cpu(i) - seq_printf(m, " CPU%02d %10u\n", i, paca[i].lpevent_count); - - return 0; -} - -static int proc_lpevents_open(struct inode *inode, struct file *file) -{ - return single_open(file, proc_lpevents_show, NULL); -} - -static struct file_operations proc_lpevents_operations = { - .open = proc_lpevents_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - static unsigned long startTitan = 0; static unsigned long startTb = 0; @@ -148,10 +104,6 @@ static int __init iseries_proc_init(void) { struct proc_dir_entry *e; - e = create_proc_entry("iSeries/lpevents", S_IFREG|S_IRUGO, NULL); - if (e) - e->proc_fops = &proc_lpevents_operations; - e = create_proc_entry("iSeries/titanTod", S_IFREG|S_IRUGO, NULL); if (e) e->proc_fops = &proc_titantod_operations; diff --git a/arch/ppc64/kernel/iSeries_setup.c b/arch/ppc64/kernel/iSeries_setup.c index b31962436fe3..a649edbb23b6 100644 --- a/arch/ppc64/kernel/iSeries_setup.c +++ b/arch/ppc64/kernel/iSeries_setup.c @@ -24,7 +24,6 @@ #include <linux/smp.h> #include <linux/param.h> #include <linux/string.h> -#include <linux/bootmem.h> #include <linux/initrd.h> #include <linux/seq_file.h> #include <linux/kdev_t.h> @@ -504,7 +503,7 @@ static void __init build_iSeries_Memory_Map(void) /* Fill in the hashed page table hash mask */ num_ptegs = hptSizePages * - (PAGE_SIZE / (sizeof(HPTE) * HPTES_PER_GROUP)); + (PAGE_SIZE / (sizeof(hpte_t) * HPTES_PER_GROUP)); htab_hash_mask = num_ptegs - 1; /* @@ -619,25 +618,23 @@ static void __init setup_iSeries_cache_sizes(void) static void iSeries_make_pte(unsigned long va, unsigned long pa, int mode) { - HPTE local_hpte, rhpte; + hpte_t local_hpte, rhpte; unsigned long hash, vpn; long slot; vpn = va >> PAGE_SHIFT; hash = hpt_hash(vpn, 0); - local_hpte.dw1.dword1 = pa | mode; - local_hpte.dw0.dword0 = 0; - local_hpte.dw0.dw0.avpn = va >> 23; - local_hpte.dw0.dw0.bolted = 1; /* bolted */ - local_hpte.dw0.dw0.v = 1; + local_hpte.r = pa | mode; + local_hpte.v = ((va >> 23) << HPTE_V_AVPN_SHIFT) + | HPTE_V_BOLTED | HPTE_V_VALID; slot = HvCallHpt_findValid(&rhpte, vpn); if (slot < 0) { /* Must find space in primary group */ panic("hash_page: hpte already exists\n"); } - HvCallHpt_addValidate(slot, 0, (HPTE *)&local_hpte ); + HvCallHpt_addValidate(slot, 0, &local_hpte); } /* @@ -647,7 +644,7 @@ static void __init iSeries_bolt_kernel(unsigned long saddr, unsigned long eaddr) { unsigned long pa; unsigned long mode_rw = _PAGE_ACCESSED | _PAGE_COHERENT | PP_RWXX; - HPTE hpte; + hpte_t hpte; for (pa = saddr; pa < eaddr ;pa += PAGE_SIZE) { unsigned long ea = (unsigned long)__va(pa); @@ -660,7 +657,7 @@ static void __init iSeries_bolt_kernel(unsigned long saddr, unsigned long eaddr) if (!in_kernel_text(ea)) mode_rw |= HW_NO_EXEC; - if (hpte.dw0.dw0.v) { + if (hpte.v & HPTE_V_VALID) { /* HPTE exists, so just bolt it */ HvCallHpt_setSwBits(slot, 0x10, 0); /* And make sure the pp bits are correct */ @@ -671,15 +668,11 @@ static void __init iSeries_bolt_kernel(unsigned long saddr, unsigned long eaddr) } } -extern unsigned long ppc_proc_freq; -extern unsigned long ppc_tb_freq; - /* * Document me. */ static void __init iSeries_setup_arch(void) { - void *eventStack; unsigned procIx = get_paca()->lppaca.dyn_hv_phys_proc_index; /* Add an eye catcher and the systemcfg layout version number */ @@ -688,24 +681,7 @@ static void __init iSeries_setup_arch(void) systemcfg->version.minor = SYSTEMCFG_MINOR; /* Setup the Lp Event Queue */ - - /* Allocate a page for the Event Stack - * The hypervisor wants the absolute real address, so - * we subtract out the KERNELBASE and add in the - * absolute real address of the kernel load area - */ - eventStack = alloc_bootmem_pages(LpEventStackSize); - memset(eventStack, 0, LpEventStackSize); - - /* Invoke the hypervisor to initialize the event stack */ - HvCallEvent_setLpEventStack(0, eventStack, LpEventStackSize); - - /* Initialize fields in our Lp Event Queue */ - xItLpQueue.xSlicEventStackPtr = (char *)eventStack; - xItLpQueue.xSlicCurEventPtr = (char *)eventStack; - xItLpQueue.xSlicLastValidEventPtr = (char *)eventStack + - (LpEventStackSize - LpEventMaxSize); - xItLpQueue.xIndex = 0; + setup_hvlpevent_queue(); /* Compute processor frequency */ procFreqHz = ((1UL << 34) * 1000000) / @@ -772,8 +748,6 @@ static void iSeries_halt(void) mf_power_off(); } -extern void setup_default_decr(void); - /* * void __init iSeries_calibrate_decr() * @@ -858,27 +832,91 @@ static int __init iSeries_src_init(void) late_initcall(iSeries_src_init); -static int set_spread_lpevents(char *str) +static inline void process_iSeries_events(void) { - unsigned long i; - unsigned long val = simple_strtoul(str, NULL, 0); + asm volatile ("li 0,0x5555; sc" : : : "r0", "r3"); +} + +static void yield_shared_processor(void) +{ + unsigned long tb; + + HvCall_setEnabledInterrupts(HvCall_MaskIPI | + HvCall_MaskLpEvent | + HvCall_MaskLpProd | + HvCall_MaskTimeout); + + tb = get_tb(); + /* Compute future tb value when yield should expire */ + HvCall_yieldProcessor(HvCall_YieldTimed, tb+tb_ticks_per_jiffy); /* - * The parameter is the number of processors to share in processing - * lp events. + * The decrementer stops during the yield. Force a fake decrementer + * here and let the timer_interrupt code sort out the actual time. */ - if (( val > 0) && (val <= NR_CPUS)) { - for (i = 1; i < val; ++i) - paca[i].lpqueue_ptr = paca[0].lpqueue_ptr; + get_paca()->lppaca.int_dword.fields.decr_int = 1; + process_iSeries_events(); +} - printk("lpevent processing spread over %ld processors\n", val); - } else { - printk("invalid spread_lpevents %ld\n", val); +static int iseries_shared_idle(void) +{ + while (1) { + while (!need_resched() && !hvlpevent_is_pending()) { + local_irq_disable(); + ppc64_runlatch_off(); + + /* Recheck with irqs off */ + if (!need_resched() && !hvlpevent_is_pending()) + yield_shared_processor(); + + HMT_medium(); + local_irq_enable(); + } + + ppc64_runlatch_on(); + + if (hvlpevent_is_pending()) + process_iSeries_events(); + + schedule(); } - return 1; + return 0; +} + +static int iseries_dedicated_idle(void) +{ + long oldval; + + while (1) { + oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); + + if (!oldval) { + set_thread_flag(TIF_POLLING_NRFLAG); + + while (!need_resched()) { + ppc64_runlatch_off(); + HMT_low(); + + if (hvlpevent_is_pending()) { + HMT_medium(); + ppc64_runlatch_on(); + process_iSeries_events(); + } + } + + HMT_medium(); + clear_thread_flag(TIF_POLLING_NRFLAG); + } else { + set_need_resched(); + } + + ppc64_runlatch_on(); + schedule(); + } + + return 0; } -__setup("spread_lpevents=", set_spread_lpevents); #ifndef CONFIG_PCI void __init iSeries_init_IRQ(void) { } @@ -905,5 +943,13 @@ void __init iSeries_early_setup(void) ppc_md.get_rtc_time = iSeries_get_rtc_time; ppc_md.calibrate_decr = iSeries_calibrate_decr; ppc_md.progress = iSeries_progress; + + if (get_paca()->lppaca.shared_proc) { + ppc_md.idle_loop = iseries_shared_idle; + printk(KERN_INFO "Using shared processor idle loop\n"); + } else { + ppc_md.idle_loop = iseries_dedicated_idle; + printk(KERN_INFO "Using dedicated idle loop\n"); + } } diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c index bdf13b4dc1c8..954395d42636 100644 --- a/arch/ppc64/kernel/idle.c +++ b/arch/ppc64/kernel/idle.c @@ -20,109 +20,18 @@ #include <linux/kernel.h> #include <linux/smp.h> #include <linux/cpu.h> -#include <linux/module.h> #include <linux/sysctl.h> -#include <linux/smp.h> #include <asm/system.h> #include <asm/processor.h> -#include <asm/mmu.h> #include <asm/cputable.h> #include <asm/time.h> -#include <asm/iSeries/HvCall.h> -#include <asm/iSeries/ItLpQueue.h> -#include <asm/plpar_wrappers.h> #include <asm/systemcfg.h> +#include <asm/machdep.h> extern void power4_idle(void); -static int (*idle_loop)(void); - -#ifdef CONFIG_PPC_ISERIES -static unsigned long maxYieldTime = 0; -static unsigned long minYieldTime = 0xffffffffffffffffUL; - -static inline void process_iSeries_events(void) -{ - asm volatile ("li 0,0x5555; sc" : : : "r0", "r3"); -} - -static void yield_shared_processor(void) -{ - unsigned long tb; - unsigned long yieldTime; - - HvCall_setEnabledInterrupts(HvCall_MaskIPI | - HvCall_MaskLpEvent | - HvCall_MaskLpProd | - HvCall_MaskTimeout); - - tb = get_tb(); - /* Compute future tb value when yield should expire */ - HvCall_yieldProcessor(HvCall_YieldTimed, tb+tb_ticks_per_jiffy); - - yieldTime = get_tb() - tb; - if (yieldTime > maxYieldTime) - maxYieldTime = yieldTime; - - if (yieldTime < minYieldTime) - minYieldTime = yieldTime; - - /* - * The decrementer stops during the yield. Force a fake decrementer - * here and let the timer_interrupt code sort out the actual time. - */ - get_paca()->lppaca.int_dword.fields.decr_int = 1; - process_iSeries_events(); -} - -static int iSeries_idle(void) -{ - struct paca_struct *lpaca; - long oldval; - - /* ensure iSeries run light will be out when idle */ - ppc64_runlatch_off(); - - lpaca = get_paca(); - - while (1) { - if (lpaca->lppaca.shared_proc) { - if (ItLpQueue_isLpIntPending(lpaca->lpqueue_ptr)) - process_iSeries_events(); - if (!need_resched()) - yield_shared_processor(); - } else { - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - - while (!need_resched()) { - HMT_medium(); - if (ItLpQueue_isLpIntPending(lpaca->lpqueue_ptr)) - process_iSeries_events(); - HMT_low(); - } - - HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); - } - } - - ppc64_runlatch_on(); - schedule(); - ppc64_runlatch_off(); - } - - return 0; -} - -#else - -static int default_idle(void) +int default_idle(void) { long oldval; unsigned int cpu = smp_processor_id(); @@ -134,7 +43,8 @@ static int default_idle(void) set_thread_flag(TIF_POLLING_NRFLAG); while (!need_resched() && !cpu_is_offline(cpu)) { - barrier(); + ppc64_runlatch_off(); + /* * Go into low thread priority and possibly * low power mode. @@ -149,6 +59,7 @@ static int default_idle(void) set_need_resched(); } + ppc64_runlatch_on(); schedule(); if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) cpu_die(); @@ -157,127 +68,19 @@ static int default_idle(void) return 0; } -#ifdef CONFIG_PPC_PSERIES - -DECLARE_PER_CPU(unsigned long, smt_snooze_delay); - -int dedicated_idle(void) +int native_idle(void) { - long oldval; - struct paca_struct *lpaca = get_paca(), *ppaca; - unsigned long start_snooze; - unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay); - unsigned int cpu = smp_processor_id(); - - ppaca = &paca[cpu ^ 1]; - while (1) { - /* - * Indicate to the HV that we are idle. Now would be - * a good time to find other work to dispatch. - */ - lpaca->lppaca.idle = 1; - - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - start_snooze = __get_tb() + - *smt_snooze_delay * tb_ticks_per_usec; - while (!need_resched() && !cpu_is_offline(cpu)) { - /* - * Go into low thread priority and possibly - * low power mode. - */ - HMT_low(); - HMT_very_low(); - - if (*smt_snooze_delay == 0 || - __get_tb() < start_snooze) - continue; - - HMT_medium(); - - if (!(ppaca->lppaca.idle)) { - local_irq_disable(); - - /* - * We are about to sleep the thread - * and so wont be polling any - * more. - */ - clear_thread_flag(TIF_POLLING_NRFLAG); - - /* - * SMT dynamic mode. Cede will result - * in this thread going dormant, if the - * partner thread is still doing work. - * Thread wakes up if partner goes idle, - * an interrupt is presented, or a prod - * occurs. Returning from the cede - * enables external interrupts. - */ - if (!need_resched()) - cede_processor(); - else - local_irq_enable(); - } else { - /* - * Give the HV an opportunity at the - * processor, since we are not doing - * any work. - */ - poll_pending(); - } - } - - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); - } - - HMT_medium(); - lpaca->lppaca.idle = 0; - schedule(); - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); - } - return 0; -} - -static int shared_idle(void) -{ - struct paca_struct *lpaca = get_paca(); - unsigned int cpu = smp_processor_id(); - - while (1) { - /* - * Indicate to the HV that we are idle. Now would be - * a good time to find other work to dispatch. - */ - lpaca->lppaca.idle = 1; + ppc64_runlatch_off(); - while (!need_resched() && !cpu_is_offline(cpu)) { - local_irq_disable(); + if (!need_resched()) + power4_idle(); - /* - * Yield the processor to the hypervisor. We return if - * an external interrupt occurs (which are driven prior - * to returning here) or if a prod occurs from another - * processor. When returning here, external interrupts - * are enabled. - * - * Check need_resched() again with interrupts disabled - * to avoid a race. - */ - if (!need_resched()) - cede_processor(); - else - local_irq_enable(); + if (need_resched()) { + ppc64_runlatch_on(); + schedule(); } - HMT_medium(); - lpaca->lppaca.idle = 0; - schedule(); if (cpu_is_offline(smp_processor_id()) && system_state == SYSTEM_RUNNING) cpu_die(); @@ -286,29 +89,10 @@ static int shared_idle(void) return 0; } -#endif /* CONFIG_PPC_PSERIES */ - -static int native_idle(void) -{ - while(1) { - /* check CPU type here */ - if (!need_resched()) - power4_idle(); - if (need_resched()) - schedule(); - - if (cpu_is_offline(raw_smp_processor_id()) && - system_state == SYSTEM_RUNNING) - cpu_die(); - } - return 0; -} - -#endif /* CONFIG_PPC_ISERIES */ - void cpu_idle(void) { - idle_loop(); + BUG_ON(NULL == ppc_md.idle_loop); + ppc_md.idle_loop(); } int powersave_nap; @@ -342,42 +126,3 @@ register_powersave_nap_sysctl(void) } __initcall(register_powersave_nap_sysctl); #endif - -int idle_setup(void) -{ - /* - * Move that junk to each platform specific file, eventually define - * a pSeries_idle for shared processor stuff - */ -#ifdef CONFIG_PPC_ISERIES - idle_loop = iSeries_idle; - return 1; -#else - idle_loop = default_idle; -#endif -#ifdef CONFIG_PPC_PSERIES - if (systemcfg->platform & PLATFORM_PSERIES) { - if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) { - if (get_paca()->lppaca.shared_proc) { - printk(KERN_INFO "Using shared processor idle loop\n"); - idle_loop = shared_idle; - } else { - printk(KERN_INFO "Using dedicated idle loop\n"); - idle_loop = dedicated_idle; - } - } else { - printk(KERN_INFO "Using default idle loop\n"); - idle_loop = default_idle; - } - } -#endif /* CONFIG_PPC_PSERIES */ -#ifndef CONFIG_PPC_ISERIES - if (systemcfg->platform == PLATFORM_POWERMAC || - systemcfg->platform == PLATFORM_MAPLE) { - printk(KERN_INFO "Using native/NAP idle loop\n"); - idle_loop = native_idle; - } -#endif /* CONFIG_PPC_ISERIES */ - - return 1; -} diff --git a/arch/ppc64/kernel/irq.c b/arch/ppc64/kernel/irq.c index d860467b8f09..f41afe545045 100644 --- a/arch/ppc64/kernel/irq.c +++ b/arch/ppc64/kernel/irq.c @@ -66,7 +66,6 @@ EXPORT_SYMBOL(irq_desc); int distribute_irqs = 1; int __irq_offset_value; int ppc_spurious_interrupts; -unsigned long lpevent_count; u64 ppc64_interrupt_controller; int show_interrupts(struct seq_file *p, void *v) @@ -245,7 +244,7 @@ void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq) spin_lock(&desc->lock); if (!noirqdebug) - note_interrupt(irq, desc, action_ret); + note_interrupt(irq, desc, action_ret, regs); if (likely(!(desc->status & IRQ_PENDING))) break; desc->status &= ~IRQ_PENDING; @@ -269,7 +268,6 @@ out: void do_IRQ(struct pt_regs *regs) { struct paca_struct *lpaca; - struct ItLpQueue *lpq; irq_enter(); @@ -295,9 +293,8 @@ void do_IRQ(struct pt_regs *regs) iSeries_smp_message_recv(regs); } #endif /* CONFIG_SMP */ - lpq = lpaca->lpqueue_ptr; - if (lpq && ItLpQueue_isLpIntPending(lpq)) - lpevent_count += ItLpQueue_process(lpq, regs); + if (hvlpevent_is_pending()) + process_hvlpevents(regs); irq_exit(); @@ -395,6 +392,9 @@ int virt_irq_create_mapping(unsigned int real_irq) if (ppc64_interrupt_controller == IC_OPEN_PIC) return real_irq; /* no mapping for openpic (for now) */ + if (ppc64_interrupt_controller == IC_BPA_IIC) + return real_irq; /* no mapping for iic either */ + /* don't map interrupts < MIN_VIRT_IRQ */ if (real_irq < MIN_VIRT_IRQ) { virt_irq_to_real_map[real_irq] = real_irq; diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index e950a2058a19..a3d519518fb8 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -32,15 +32,16 @@ #include <linux/ptrace.h> #include <linux/spinlock.h> #include <linux/preempt.h> +#include <asm/cacheflush.h> #include <asm/kdebug.h> #include <asm/sstep.h> -/* kprobe_status settings */ -#define KPROBE_HIT_ACTIVE 0x00000001 -#define KPROBE_HIT_SS 0x00000002 +static DECLARE_MUTEX(kprobe_mutex); static struct kprobe *current_kprobe; static unsigned long kprobe_status, kprobe_saved_msr; +static struct kprobe *kprobe_prev; +static unsigned long kprobe_status_prev, kprobe_saved_msr_prev; static struct pt_regs jprobe_saved_regs; int arch_prepare_kprobe(struct kprobe *p) @@ -55,32 +56,87 @@ int arch_prepare_kprobe(struct kprobe *p) printk("Cannot register a kprobe on rfid or mtmsrd\n"); ret = -EINVAL; } + + /* insn must be on a special executable page on ppc64 */ + if (!ret) { + up(&kprobe_mutex); + p->ainsn.insn = get_insn_slot(); + down(&kprobe_mutex); + if (!p->ainsn.insn) + ret = -ENOMEM; + } return ret; } void arch_copy_kprobe(struct kprobe *p) { memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); + p->opcode = *p->addr; } -void arch_remove_kprobe(struct kprobe *p) +void arch_arm_kprobe(struct kprobe *p) { + *p->addr = BREAKPOINT_INSTRUCTION; + flush_icache_range((unsigned long) p->addr, + (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } -static inline void disarm_kprobe(struct kprobe *p, struct pt_regs *regs) +void arch_disarm_kprobe(struct kprobe *p) { *p->addr = p->opcode; - regs->nip = (unsigned long)p->addr; + flush_icache_range((unsigned long) p->addr, + (unsigned long) p->addr + sizeof(kprobe_opcode_t)); +} + +void arch_remove_kprobe(struct kprobe *p) +{ + up(&kprobe_mutex); + free_insn_slot(p->ainsn.insn); + down(&kprobe_mutex); } static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) { + kprobe_opcode_t insn = *p->ainsn.insn; + regs->msr |= MSR_SE; - /*single step inline if it a breakpoint instruction*/ - if (p->opcode == BREAKPOINT_INSTRUCTION) + + /* single step inline if it is a trap variant */ + if (IS_TW(insn) || IS_TD(insn) || IS_TWI(insn) || IS_TDI(insn)) regs->nip = (unsigned long)p->addr; else - regs->nip = (unsigned long)&p->ainsn.insn; + regs->nip = (unsigned long)p->ainsn.insn; +} + +static inline void save_previous_kprobe(void) +{ + kprobe_prev = current_kprobe; + kprobe_status_prev = kprobe_status; + kprobe_saved_msr_prev = kprobe_saved_msr; +} + +static inline void restore_previous_kprobe(void) +{ + current_kprobe = kprobe_prev; + kprobe_status = kprobe_status_prev; + kprobe_saved_msr = kprobe_saved_msr_prev; +} + +void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) +{ + struct kretprobe_instance *ri; + + if ((ri = get_free_rp_inst(rp)) != NULL) { + ri->rp = rp; + ri->task = current; + ri->ret_addr = (kprobe_opcode_t *)regs->link; + + /* Replace the return addr with trampoline addr */ + regs->link = (unsigned long)kretprobe_trampoline; + add_rp_inst(ri); + } else { + rp->nmissed++; + } } static inline int kprobe_handler(struct pt_regs *regs) @@ -101,8 +157,19 @@ static inline int kprobe_handler(struct pt_regs *regs) unlock_kprobes(); goto no_kprobe; } - disarm_kprobe(p, regs); - ret = 1; + /* We have reentered the kprobe_handler(), since + * another probe was hit while within the handler. + * We here save the original kprobes variables and + * just single step on the instruction of the new probe + * without calling any user handlers. + */ + save_previous_kprobe(); + current_kprobe = p; + kprobe_saved_msr = regs->msr; + p->nmissed++; + prepare_singlestep(p, regs); + kprobe_status = KPROBE_REENTER; + return 1; } else { p = current_kprobe; if (p->break_handler && p->break_handler(p, regs)) { @@ -162,6 +229,78 @@ no_kprobe: } /* + * Function return probe trampoline: + * - init_kprobes() establishes a probepoint here + * - When the probed function returns, this probe + * causes the handlers to fire + */ +void kretprobe_trampoline_holder(void) +{ + asm volatile(".global kretprobe_trampoline\n" + "kretprobe_trampoline:\n" + "nop\n"); +} + +/* + * Called when the probe at kretprobe trampoline is hit + */ +int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct kretprobe_instance *ri = NULL; + struct hlist_head *head; + struct hlist_node *node, *tmp; + unsigned long orig_ret_address = 0; + unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + + head = kretprobe_inst_table_head(current); + + /* + * It is possible to have multiple instances associated with a given + * task either because an multiple functions in the call path + * have a return probe installed on them, and/or more then one return + * return probe was registered for a target function. + * + * We can handle this because: + * - instances are always inserted at the head of the list + * - when multiple return probes are registered for the same + * function, the first instance's ret_addr will point to the + * real return address, and all the rest will point to + * kretprobe_trampoline + */ + hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { + if (ri->task != current) + /* another task is sharing our hash bucket */ + continue; + + if (ri->rp && ri->rp->handler) + ri->rp->handler(ri, regs); + + orig_ret_address = (unsigned long)ri->ret_addr; + recycle_rp_inst(ri); + + if (orig_ret_address != trampoline_address) + /* + * This is the real return address. Any other + * instances associated with this task are for + * other calls deeper on the call stack + */ + break; + } + + BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); + regs->nip = orig_ret_address; + + unlock_kprobes(); + + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we have handled unlocking + * and re-enabling preemption. + */ + return 1; +} + +/* * Called after single-stepping. p->addr is the address of the * instruction whose first byte has been replaced by the "breakpoint" * instruction. To avoid the SMP problems that can occur when we @@ -172,9 +311,10 @@ no_kprobe: static void resume_execution(struct kprobe *p, struct pt_regs *regs) { int ret; + unsigned int insn = *p->ainsn.insn; regs->nip = (unsigned long)p->addr; - ret = emulate_step(regs, p->ainsn.insn[0]); + ret = emulate_step(regs, insn); if (ret == 0) regs->nip = (unsigned long)p->addr + 4; } @@ -184,13 +324,21 @@ static inline int post_kprobe_handler(struct pt_regs *regs) if (!kprobe_running()) return 0; - if (current_kprobe->post_handler) + if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { + kprobe_status = KPROBE_HIT_SSDONE; current_kprobe->post_handler(current_kprobe, regs, 0); + } resume_execution(current_kprobe, regs); regs->msr |= kprobe_saved_msr; + /*Restore back the original saved kprobes variables and continue. */ + if (kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(); + goto out; + } unlock_kprobes(); +out: preempt_enable_no_resched(); /* @@ -290,3 +438,13 @@ int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs)); return 1; } + +static struct kprobe trampoline_p = { + .addr = (kprobe_opcode_t *) &kretprobe_trampoline, + .pre_handler = trampoline_probe_handler +}; + +int __init arch_init_kprobes(void) +{ + return register_kprobe(&trampoline_p); +} diff --git a/arch/ppc64/kernel/lparcfg.c b/arch/ppc64/kernel/lparcfg.c index 387923fcf9b0..02e96627fa66 100644 --- a/arch/ppc64/kernel/lparcfg.c +++ b/arch/ppc64/kernel/lparcfg.c @@ -34,6 +34,7 @@ #include <asm/system.h> #include <asm/time.h> #include <asm/iSeries/ItExtVpdPanel.h> +#include <asm/prom.h> #define MODULE_VERS "1.6" #define MODULE_NAME "lparcfg" diff --git a/arch/ppc64/kernel/machine_kexec.c b/arch/ppc64/kernel/machine_kexec.c new file mode 100644 index 000000000000..4775f12a013c --- /dev/null +++ b/arch/ppc64/kernel/machine_kexec.c @@ -0,0 +1,306 @@ +/* + * machine_kexec.c - handle transition of Linux booting another kernel + * + * Copyright (C) 2004-2005, IBM Corp. + * + * Created by: Milton D Miller II + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + + +#include <linux/cpumask.h> +#include <linux/kexec.h> +#include <linux/smp.h> +#include <linux/thread_info.h> +#include <linux/errno.h> + +#include <asm/page.h> +#include <asm/current.h> +#include <asm/machdep.h> +#include <asm/cacheflush.h> +#include <asm/paca.h> +#include <asm/mmu.h> +#include <asm/sections.h> /* _end */ +#include <asm/prom.h> + +#define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */ + +/* Have this around till we move it into crash specific file */ +note_buf_t crash_notes[NR_CPUS]; + +/* Dummy for now. Not sure if we need to have a crash shutdown in here + * and if what it will achieve. Letting it be now to compile the code + * in generic kexec environment + */ +void machine_crash_shutdown(struct pt_regs *regs) +{ + /* do nothing right now */ + /* smp_relase_cpus() if we want smp on panic kernel */ + /* cpu_irq_down to isolate us until we are ready */ +} + +int machine_kexec_prepare(struct kimage *image) +{ + int i; + unsigned long begin, end; /* limits of segment */ + unsigned long low, high; /* limits of blocked memory range */ + struct device_node *node; + unsigned long *basep; + unsigned int *sizep; + + if (!ppc_md.hpte_clear_all) + return -ENOENT; + + /* + * Since we use the kernel fault handlers and paging code to + * handle the virtual mode, we must make sure no destination + * overlaps kernel static data or bss. + */ + for (i = 0; i < image->nr_segments; i++) + if (image->segment[i].mem < __pa(_end)) + return -ETXTBSY; + + /* + * For non-LPAR, we absolutely can not overwrite the mmu hash + * table, since we are still using the bolted entries in it to + * do the copy. Check that here. + * + * It is safe if the end is below the start of the blocked + * region (end <= low), or if the beginning is after the + * end of the blocked region (begin >= high). Use the + * boolean identity !(a || b) === (!a && !b). + */ + if (htab_address) { + low = __pa(htab_address); + high = low + (htab_hash_mask + 1) * HASH_GROUP_SIZE; + + for (i = 0; i < image->nr_segments; i++) { + begin = image->segment[i].mem; + end = begin + image->segment[i].memsz; + + if ((begin < high) && (end > low)) + return -ETXTBSY; + } + } + + /* We also should not overwrite the tce tables */ + for (node = of_find_node_by_type(NULL, "pci"); node != NULL; + node = of_find_node_by_type(node, "pci")) { + basep = (unsigned long *)get_property(node, "linux,tce-base", + NULL); + sizep = (unsigned int *)get_property(node, "linux,tce-size", + NULL); + if (basep == NULL || sizep == NULL) + continue; + + low = *basep; + high = low + (*sizep); + + for (i = 0; i < image->nr_segments; i++) { + begin = image->segment[i].mem; + end = begin + image->segment[i].memsz; + + if ((begin < high) && (end > low)) + return -ETXTBSY; + } + } + + return 0; +} + +void machine_kexec_cleanup(struct kimage *image) +{ + /* we do nothing in prepare that needs to be undone */ +} + +#define IND_FLAGS (IND_DESTINATION | IND_INDIRECTION | IND_DONE | IND_SOURCE) + +static void copy_segments(unsigned long ind) +{ + unsigned long entry; + unsigned long *ptr; + void *dest; + void *addr; + + /* + * We rely on kexec_load to create a lists that properly + * initializes these pointers before they are used. + * We will still crash if the list is wrong, but at least + * the compiler will be quiet. + */ + ptr = NULL; + dest = NULL; + + for (entry = ind; !(entry & IND_DONE); entry = *ptr++) { + addr = __va(entry & PAGE_MASK); + + switch (entry & IND_FLAGS) { + case IND_DESTINATION: + dest = addr; + break; + case IND_INDIRECTION: + ptr = addr; + break; + case IND_SOURCE: + copy_page(dest, addr); + dest += PAGE_SIZE; + } + } +} + +void kexec_copy_flush(struct kimage *image) +{ + long i, nr_segments = image->nr_segments; + struct kexec_segment ranges[KEXEC_SEGMENT_MAX]; + + /* save the ranges on the stack to efficiently flush the icache */ + memcpy(ranges, image->segment, sizeof(ranges)); + + /* + * After this call we may not use anything allocated in dynamic + * memory, including *image. + * + * Only globals and the stack are allowed. + */ + copy_segments(image->head); + + /* + * we need to clear the icache for all dest pages sometime, + * including ones that were in place on the original copy + */ + for (i = 0; i < nr_segments; i++) + flush_icache_range(ranges[i].mem + KERNELBASE, + ranges[i].mem + KERNELBASE + + ranges[i].memsz); +} + +#ifdef CONFIG_SMP + +/* FIXME: we should schedule this function to be called on all cpus based + * on calling the interrupts, but we would like to call it off irq level + * so that the interrupt controller is clean. + */ +void kexec_smp_down(void *arg) +{ + if (ppc_md.cpu_irq_down) + ppc_md.cpu_irq_down(1); + + local_irq_disable(); + kexec_smp_wait(); + /* NOTREACHED */ +} + +static void kexec_prepare_cpus(void) +{ + int my_cpu, i, notified=-1; + + smp_call_function(kexec_smp_down, NULL, 0, /* wait */0); + my_cpu = get_cpu(); + + /* check the others cpus are now down (via paca hw cpu id == -1) */ + for (i=0; i < NR_CPUS; i++) { + if (i == my_cpu) + continue; + + while (paca[i].hw_cpu_id != -1) { + if (!cpu_possible(i)) { + printk("kexec: cpu %d hw_cpu_id %d is not" + " possible, ignoring\n", + i, paca[i].hw_cpu_id); + break; + } + if (!cpu_online(i)) { + /* Fixme: this can be spinning in + * pSeries_secondary_wait with a paca + * waiting for it to go online. + */ + printk("kexec: cpu %d hw_cpu_id %d is not" + " online, ignoring\n", + i, paca[i].hw_cpu_id); + break; + } + if (i != notified) { + printk( "kexec: waiting for cpu %d (physical" + " %d) to go down\n", + i, paca[i].hw_cpu_id); + notified = i; + } + } + } + + /* after we tell the others to go down */ + if (ppc_md.cpu_irq_down) + ppc_md.cpu_irq_down(0); + + put_cpu(); + + local_irq_disable(); +} + +#else /* ! SMP */ + +static void kexec_prepare_cpus(void) +{ + extern void smp_release_cpus(void); + /* + * move the secondarys to us so that we can copy + * the new kernel 0-0x100 safely + * + * do this if kexec in setup.c ? + * + * We need to release the cpus if we are ever going from an + * UP to an SMP kernel. + */ + smp_release_cpus(); + if (ppc_md.cpu_irq_down) + ppc_md.cpu_irq_down(0); + local_irq_disable(); +} + +#endif /* SMP */ + +/* + * kexec thread structure and stack. + * + * We need to make sure that this is 16384-byte aligned due to the + * way process stacks are handled. It also must be statically allocated + * or allocated as part of the kimage, because everything else may be + * overwritten when we copy the kexec image. We piggyback on the + * "init_task" linker section here to statically allocate a stack. + * + * We could use a smaller stack if we don't care about anything using + * current, but that audit has not been performed. + */ +union thread_union kexec_stack + __attribute__((__section__(".data.init_task"))) = { }; + +/* Our assembly helper, in kexec_stub.S */ +extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start, + void *image, void *control, + void (*clear_all)(void)) ATTRIB_NORET; + +/* too late to fail here */ +void machine_kexec(struct kimage *image) +{ + + /* prepare control code if any */ + + /* shutdown other cpus into our wait loop and quiesce interrupts */ + kexec_prepare_cpus(); + + /* switch to a staticly allocated stack. Based on irq stack code. + * XXX: the task struct will likely be invalid once we do the copy! + */ + kexec_stack.thread_info.task = current_thread_info()->task; + kexec_stack.thread_info.flags = 0; + + /* Some things are best done in assembly. Finding globals with + * a toc is easier in C, so pass in what we can. + */ + kexec_sequence(&kexec_stack, image->start, image, + page_address(image->control_code_page), + ppc_md.hpte_clear_all); + /* NOTREACHED */ +} diff --git a/arch/ppc64/kernel/maple_setup.c b/arch/ppc64/kernel/maple_setup.c index 8cf95a27178e..bb55b5a56910 100644 --- a/arch/ppc64/kernel/maple_setup.c +++ b/arch/ppc64/kernel/maple_setup.c @@ -78,17 +78,77 @@ extern int maple_pci_get_legacy_ide_irq(struct pci_dev *dev, int channel); extern void generic_find_legacy_serial_ports(u64 *physport, unsigned int *default_speed); - static void maple_restart(char *cmd) { + unsigned int maple_nvram_base; + unsigned int maple_nvram_offset; + unsigned int maple_nvram_command; + struct device_node *rtcs; + + /* find NVRAM device */ + rtcs = find_compatible_devices("nvram", "AMD8111"); + if (rtcs && rtcs->addrs) { + maple_nvram_base = rtcs->addrs[0].address; + } else { + printk(KERN_EMERG "Maple: Unable to find NVRAM\n"); + printk(KERN_EMERG "Maple: Manual Restart Required\n"); + return; + } + + /* find service processor device */ + rtcs = find_devices("service-processor"); + if (!rtcs) { + printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); + printk(KERN_EMERG "Maple: Manual Restart Required\n"); + return; + } + maple_nvram_offset = *(unsigned int*) get_property(rtcs, + "restart-addr", NULL); + maple_nvram_command = *(unsigned int*) get_property(rtcs, + "restart-value", NULL); + + /* send command */ + outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset); + for (;;) ; } static void maple_power_off(void) { + unsigned int maple_nvram_base; + unsigned int maple_nvram_offset; + unsigned int maple_nvram_command; + struct device_node *rtcs; + + /* find NVRAM device */ + rtcs = find_compatible_devices("nvram", "AMD8111"); + if (rtcs && rtcs->addrs) { + maple_nvram_base = rtcs->addrs[0].address; + } else { + printk(KERN_EMERG "Maple: Unable to find NVRAM\n"); + printk(KERN_EMERG "Maple: Manual Power-Down Required\n"); + return; + } + + /* find service processor device */ + rtcs = find_devices("service-processor"); + if (!rtcs) { + printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); + printk(KERN_EMERG "Maple: Manual Power-Down Required\n"); + return; + } + maple_nvram_offset = *(unsigned int*) get_property(rtcs, + "power-off-addr", NULL); + maple_nvram_command = *(unsigned int*) get_property(rtcs, + "power-off-value", NULL); + + /* send command */ + outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset); + for (;;) ; } static void maple_halt(void) { + maple_power_off(); } #ifdef CONFIG_SMP @@ -117,6 +177,8 @@ void __init maple_setup_arch(void) #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; #endif + + printk(KERN_INFO "Using native/NAP idle loop\n"); } /* @@ -235,6 +297,7 @@ struct machdep_calls __initdata maple_md = { .get_boot_time = maple_get_boot_time, .set_rtc_time = maple_set_rtc_time, .get_rtc_time = maple_get_rtc_time, - .calibrate_decr = maple_calibrate_decr, + .calibrate_decr = generic_calibrate_decr, .progress = maple_progress, + .idle_loop = native_idle, }; diff --git a/arch/ppc64/kernel/maple_time.c b/arch/ppc64/kernel/maple_time.c index 07ce7895b43d..d65210abcd03 100644 --- a/arch/ppc64/kernel/maple_time.c +++ b/arch/ppc64/kernel/maple_time.c @@ -42,11 +42,8 @@ #define DBG(x...) #endif -extern void setup_default_decr(void); extern void GregorianDay(struct rtc_time * tm); -extern unsigned long ppc_tb_freq; -extern unsigned long ppc_proc_freq; static int maple_rtc_addr; static int maple_clock_read(int addr) @@ -176,51 +173,3 @@ void __init maple_get_boot_time(struct rtc_time *tm) maple_get_rtc_time(tm); } -/* XXX FIXME: Some sane defaults: 125 MHz timebase, 1GHz processor */ -#define DEFAULT_TB_FREQ 125000000UL -#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) - -void __init maple_calibrate_decr(void) -{ - struct device_node *cpu; - struct div_result divres; - unsigned int *fp = NULL; - - /* - * The cpu node should have a timebase-frequency property - * to tell us the rate at which the decrementer counts. - */ - cpu = of_find_node_by_type(NULL, "cpu"); - - ppc_tb_freq = DEFAULT_TB_FREQ; - if (cpu != 0) - fp = (unsigned int *)get_property(cpu, "timebase-frequency", NULL); - if (fp != NULL) - ppc_tb_freq = *fp; - else - printk(KERN_ERR "WARNING: Estimating decrementer frequency (not found)\n"); - fp = NULL; - ppc_proc_freq = DEFAULT_PROC_FREQ; - if (cpu != 0) - fp = (unsigned int *)get_property(cpu, "clock-frequency", NULL); - if (fp != NULL) - ppc_proc_freq = *fp; - else - printk(KERN_ERR "WARNING: Estimating processor frequency (not found)\n"); - - of_node_put(cpu); - - printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", - ppc_tb_freq/1000000, ppc_tb_freq%1000000); - printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n", - ppc_proc_freq/1000000, ppc_proc_freq%1000000); - - tb_ticks_per_jiffy = ppc_tb_freq / HZ; - tb_ticks_per_sec = tb_ticks_per_jiffy * HZ; - tb_ticks_per_usec = ppc_tb_freq / 1000000; - tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); - div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres); - tb_to_xs = divres.result_low; - - setup_default_decr(); -} diff --git a/arch/ppc64/kernel/mf.c b/arch/ppc64/kernel/mf.c index d98bebf7042f..ef4a338ebd01 100644 --- a/arch/ppc64/kernel/mf.c +++ b/arch/ppc64/kernel/mf.c @@ -801,10 +801,8 @@ int mf_get_boot_rtc(struct rtc_time *tm) return rc; /* We need to poll here as we are not yet taking interrupts */ while (rtc_data.busy) { - extern unsigned long lpevent_count; - struct ItLpQueue *lpq = get_paca()->lpqueue_ptr; - if (lpq && ItLpQueue_isLpIntPending(lpq)) - lpevent_count += ItLpQueue_process(lpq, NULL); + if (hvlpevent_is_pending()) + process_hvlpevents(NULL); } return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); } diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index e3c73b3425dc..a05b50b738e9 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -680,6 +680,177 @@ _GLOBAL(kernel_thread) ld r30,-16(r1) blr +/* kexec_wait(phys_cpu) + * + * wait for the flag to change, indicating this kernel is going away but + * the slave code for the next one is at addresses 0 to 100. + * + * This is used by all slaves. + * + * Physical (hardware) cpu id should be in r3. + */ +_GLOBAL(kexec_wait) + bl 1f +1: mflr r5 + addi r5,r5,kexec_flag-1b + +99: HMT_LOW +#ifdef CONFIG_KEXEC /* use no memory without kexec */ + lwz r4,0(r5) + cmpwi 0,r4,0 + bnea 0x60 +#endif + b 99b + +/* this can be in text because we won't change it until we are + * running in real anyways + */ +kexec_flag: + .long 0 + + +#ifdef CONFIG_KEXEC + +/* kexec_smp_wait(void) + * + * call with interrupts off + * note: this is a terminal routine, it does not save lr + * + * get phys id from paca + * set paca id to -1 to say we got here + * switch to real mode + * join other cpus in kexec_wait(phys_id) + */ +_GLOBAL(kexec_smp_wait) + lhz r3,PACAHWCPUID(r13) + li r4,-1 + sth r4,PACAHWCPUID(r13) /* let others know we left */ + bl real_mode + b .kexec_wait + +/* + * switch to real mode (turn mmu off) + * we use the early kernel trick that the hardware ignores bits + * 0 and 1 (big endian) of the effective address in real mode + * + * don't overwrite r3 here, it is live for kexec_wait above. + */ +real_mode: /* assume normal blr return */ +1: li r9,MSR_RI + li r10,MSR_DR|MSR_IR + mflr r11 /* return address to SRR0 */ + mfmsr r12 + andc r9,r12,r9 + andc r10,r12,r10 + + mtmsrd r9,1 + mtspr SPRN_SRR1,r10 + mtspr SPRN_SRR0,r11 + rfid + + +/* + * kexec_sequence(newstack, start, image, control, clear_all()) + * + * does the grungy work with stack switching and real mode switches + * also does simple calls to other code + */ + +_GLOBAL(kexec_sequence) + mflr r0 + std r0,16(r1) + + /* switch stacks to newstack -- &kexec_stack.stack */ + stdu r1,THREAD_SIZE-112(r3) + mr r1,r3 + + li r0,0 + std r0,16(r1) + + /* save regs for local vars on new stack. + * yes, we won't go back, but ... + */ + std r31,-8(r1) + std r30,-16(r1) + std r29,-24(r1) + std r28,-32(r1) + std r27,-40(r1) + std r26,-48(r1) + std r25,-56(r1) + + stdu r1,-112-64(r1) + + /* save args into preserved regs */ + mr r31,r3 /* newstack (both) */ + mr r30,r4 /* start (real) */ + mr r29,r5 /* image (virt) */ + mr r28,r6 /* control, unused */ + mr r27,r7 /* clear_all() fn desc */ + mr r26,r8 /* spare */ + lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */ + + /* disable interrupts, we are overwriting kernel data next */ + mfmsr r3 + rlwinm r3,r3,0,17,15 + mtmsrd r3,1 + + /* copy dest pages, flush whole dest image */ + mr r3,r29 + bl .kexec_copy_flush /* (image) */ + + /* turn off mmu */ + bl real_mode + + /* clear out hardware hash page table and tlb */ + ld r5,0(r27) /* deref function descriptor */ + mtctr r5 + bctrl /* ppc_md.hash_clear_all(void); */ + +/* + * kexec image calling is: + * the first 0x100 bytes of the entry point are copied to 0 + * + * all slaves branch to slave = 0x60 (absolute) + * slave(phys_cpu_id); + * + * master goes to start = entry point + * start(phys_cpu_id, start, 0); + * + * + * a wrapper is needed to call existing kernels, here is an approximate + * description of one method: + * + * v2: (2.6.10) + * start will be near the boot_block (maybe 0x100 bytes before it?) + * it will have a 0x60, which will b to boot_block, where it will wait + * and 0 will store phys into struct boot-block and load r3 from there, + * copy kernel 0-0x100 and tell slaves to back down to 0x60 again + * + * v1: (2.6.9) + * boot block will have all cpus scanning device tree to see if they + * are the boot cpu ????? + * other device tree differences (prop sizes, va vs pa, etc)... + */ + + /* copy 0x100 bytes starting at start to 0 */ + li r3,0 + mr r4,r30 + li r5,0x100 + li r6,0 + bl .copy_and_flush /* (dest, src, copy limit, start offset) */ +1: /* assume normal blr return */ + + /* release other cpus to the new kernel secondary start at 0x60 */ + mflr r5 + li r6,1 + stw r6,kexec_flag-1b(5) + mr r3,r25 # my phys cpu + mr r4,r30 # start, aka phys mem offset + mtlr 4 + li r5,0 + blr /* image->start(physid, image->start, 0); */ +#endif /* CONFIG_KEXEC */ + /* Why isn't this a) automatic, b) written in 'C'? */ .balign 8 _GLOBAL(sys_call_table32) @@ -951,11 +1122,16 @@ _GLOBAL(sys_call_table32) .llong .compat_sys_mq_timedreceive /* 265 */ .llong .compat_sys_mq_notify .llong .compat_sys_mq_getsetattr - .llong .sys_ni_syscall /* 268 reserved for sys_kexec_load */ + .llong .compat_sys_kexec_load .llong .sys32_add_key - .llong .sys32_request_key + .llong .sys32_request_key /* 270 */ .llong .compat_sys_keyctl .llong .compat_sys_waitid + .llong .sys32_ioprio_set + .llong .sys32_ioprio_get + .llong .sys_inotify_init /* 275 */ + .llong .sys_inotify_add_watch + .llong .sys_inotify_rm_watch .balign 8 _GLOBAL(sys_call_table) @@ -1227,8 +1403,13 @@ _GLOBAL(sys_call_table) .llong .sys_mq_timedreceive /* 265 */ .llong .sys_mq_notify .llong .sys_mq_getsetattr - .llong .sys_ni_syscall /* 268 reserved for sys_kexec_load */ + .llong .sys_kexec_load .llong .sys_add_key .llong .sys_request_key /* 270 */ .llong .sys_keyctl .llong .sys_waitid + .llong .sys_ioprio_set + .llong .sys_ioprio_get + .llong .sys_inotify_init /* 275 */ + .llong .sys_inotify_add_watch + .llong .sys_inotify_rm_watch diff --git a/arch/ppc64/kernel/mpic.c b/arch/ppc64/kernel/mpic.c index 593ea5b82afa..cc262a05ddb4 100644 --- a/arch/ppc64/kernel/mpic.c +++ b/arch/ppc64/kernel/mpic.c @@ -792,6 +792,35 @@ void mpic_setup_this_cpu(void) #endif /* CONFIG_SMP */ } +/* + * XXX: someone who knows mpic should check this. + * do we need to eoi the ipi including for kexec cpu here (see xics comments)? + * or can we reset the mpic in the new kernel? + */ +void mpic_teardown_this_cpu(int secondary) +{ + struct mpic *mpic = mpic_primary; + unsigned long flags; + u32 msk = 1 << hard_smp_processor_id(); + unsigned int i; + + BUG_ON(mpic == NULL); + + DBG("%s: teardown_this_cpu(%d)\n", mpic->name, hard_smp_processor_id()); + spin_lock_irqsave(&mpic_lock, flags); + + /* let the mpic know we don't want intrs. */ + for (i = 0; i < mpic->num_sources ; i++) + mpic_irq_write(i, MPIC_IRQ_DESTINATION, + mpic_irq_read(i, MPIC_IRQ_DESTINATION) & ~msk); + + /* Set current processor priority to max */ + mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0xf); + + spin_unlock_irqrestore(&mpic_lock, flags); +} + + void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask) { struct mpic *mpic = mpic_primary; diff --git a/arch/ppc64/kernel/mpic.h b/arch/ppc64/kernel/mpic.h index 571b3c99e062..ca78a7f10528 100644 --- a/arch/ppc64/kernel/mpic.h +++ b/arch/ppc64/kernel/mpic.h @@ -255,6 +255,9 @@ extern unsigned int mpic_irq_get_priority(unsigned int irq); /* Setup a non-boot CPU */ extern void mpic_setup_this_cpu(void); +/* Clean up for kexec (or cpu offline or ...) */ +extern void mpic_teardown_this_cpu(int secondary); + /* Request IPIs on primary mpic */ extern void mpic_request_ipis(void); @@ -265,3 +268,6 @@ extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask); extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs); /* This one gets to the primary mpic */ extern int mpic_get_irq(struct pt_regs *regs); + +/* global mpic for pSeries */ +extern struct mpic *pSeries_mpic; diff --git a/arch/ppc64/kernel/nvram.c b/arch/ppc64/kernel/nvram.c index 4e71781a4414..4fb1a9f5060d 100644 --- a/arch/ppc64/kernel/nvram.c +++ b/arch/ppc64/kernel/nvram.c @@ -338,9 +338,8 @@ static int nvram_remove_os_partition(void) */ static int nvram_create_os_partition(void) { - struct list_head * p; - struct nvram_partition *part = NULL; - struct nvram_partition *new_part = NULL; + struct nvram_partition *part; + struct nvram_partition *new_part; struct nvram_partition *free_part = NULL; int seq_init[2] = { 0, 0 }; loff_t tmp_index; @@ -349,8 +348,7 @@ static int nvram_create_os_partition(void) /* Find a free partition that will give us the maximum needed size If can't find one that will give us the minimum size needed */ - list_for_each(p, &nvram_part->partition) { - part = list_entry(p, struct nvram_partition, partition); + list_for_each_entry(part, &nvram_part->partition, partition) { if (part->header.signature != NVRAM_SIG_FREE) continue; diff --git a/arch/ppc64/kernel/of_device.c b/arch/ppc64/kernel/of_device.c index 66bd5ab7c25a..b80e81984ba8 100644 --- a/arch/ppc64/kernel/of_device.c +++ b/arch/ppc64/kernel/of_device.c @@ -3,6 +3,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> +#include <linux/mod_devicetable.h> #include <asm/errno.h> #include <asm/of_device.h> @@ -15,20 +16,20 @@ * Used by a driver to check whether an of_device present in the * system is in its list of supported devices. */ -const struct of_match * of_match_device(const struct of_match *matches, +const struct of_device_id *of_match_device(const struct of_device_id *matches, const struct of_device *dev) { if (!dev->node) return NULL; - while (matches->name || matches->type || matches->compatible) { + while (matches->name[0] || matches->type[0] || matches->compatible[0]) { int match = 1; - if (matches->name && matches->name != OF_ANY_MATCH) + if (matches->name[0]) match &= dev->node->name && !strcmp(matches->name, dev->node->name); - if (matches->type && matches->type != OF_ANY_MATCH) + if (matches->type[0]) match &= dev->node->type && !strcmp(matches->type, dev->node->type); - if (matches->compatible && matches->compatible != OF_ANY_MATCH) + if (matches->compatible[0]) match &= device_is_compatible(dev->node, matches->compatible); if (match) @@ -42,7 +43,7 @@ static int of_platform_bus_match(struct device *dev, struct device_driver *drv) { struct of_device * of_dev = to_of_device(dev); struct of_platform_driver * of_drv = to_of_platform_driver(drv); - const struct of_match * matches = of_drv->match_table; + const struct of_device_id * matches = of_drv->match_table; if (!matches) return 0; @@ -75,7 +76,7 @@ static int of_device_probe(struct device *dev) int error = -ENODEV; struct of_platform_driver *drv; struct of_device *of_dev; - const struct of_match *match; + const struct of_device_id *match; drv = to_of_platform_driver(dev->driver); of_dev = to_of_device(dev); diff --git a/arch/ppc64/kernel/pSeries_lpar.c b/arch/ppc64/kernel/pSeries_lpar.c index 6534812db437..74dd144dcce8 100644 --- a/arch/ppc64/kernel/pSeries_lpar.c +++ b/arch/ppc64/kernel/pSeries_lpar.c @@ -277,31 +277,20 @@ void vpa_init(int cpu) long pSeries_lpar_hpte_insert(unsigned long hpte_group, unsigned long va, unsigned long prpn, - int secondary, unsigned long hpteflags, - int bolted, int large) + unsigned long vflags, unsigned long rflags) { unsigned long arpn = physRpn_to_absRpn(prpn); unsigned long lpar_rc; unsigned long flags; unsigned long slot; - HPTE lhpte; + unsigned long hpte_v, hpte_r; unsigned long dummy0, dummy1; - /* Fill in the local HPTE with absolute rpn, avpn and flags */ - lhpte.dw1.dword1 = 0; - lhpte.dw1.dw1.rpn = arpn; - lhpte.dw1.flags.flags = hpteflags; + hpte_v = ((va >> 23) << HPTE_V_AVPN_SHIFT) | vflags | HPTE_V_VALID; + if (vflags & HPTE_V_LARGE) + hpte_v &= ~(1UL << HPTE_V_AVPN_SHIFT); - lhpte.dw0.dword0 = 0; - lhpte.dw0.dw0.avpn = va >> 23; - lhpte.dw0.dw0.h = secondary; - lhpte.dw0.dw0.bolted = bolted; - lhpte.dw0.dw0.v = 1; - - if (large) { - lhpte.dw0.dw0.l = 1; - lhpte.dw0.dw0.avpn &= ~0x1UL; - } + hpte_r = (arpn << HPTE_R_RPN_SHIFT) | rflags; /* Now fill in the actual HPTE */ /* Set CEC cookie to 0 */ @@ -312,11 +301,11 @@ long pSeries_lpar_hpte_insert(unsigned long hpte_group, flags = 0; /* XXX why is this here? - Anton */ - if (hpteflags & (_PAGE_GUARDED|_PAGE_NO_CACHE)) - lhpte.dw1.flags.flags &= ~_PAGE_COHERENT; + if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE)) + hpte_r &= ~_PAGE_COHERENT; - lpar_rc = plpar_hcall(H_ENTER, flags, hpte_group, lhpte.dw0.dword0, - lhpte.dw1.dword1, &slot, &dummy0, &dummy1); + lpar_rc = plpar_hcall(H_ENTER, flags, hpte_group, hpte_v, + hpte_r, &slot, &dummy0, &dummy1); if (unlikely(lpar_rc == H_PTEG_Full)) return -1; @@ -332,7 +321,7 @@ long pSeries_lpar_hpte_insert(unsigned long hpte_group, /* Because of iSeries, we have to pass down the secondary * bucket bit here as well */ - return (slot & 7) | (secondary << 3); + return (slot & 7) | (!!(vflags & HPTE_V_SECONDARY) << 3); } static DEFINE_SPINLOCK(pSeries_lpar_tlbie_lock); @@ -427,22 +416,18 @@ static long pSeries_lpar_hpte_find(unsigned long vpn) unsigned long hash; unsigned long i, j; long slot; - union { - unsigned long dword0; - Hpte_dword0 dw0; - } hpte_dw0; - Hpte_dword0 dw0; + unsigned long hpte_v; hash = hpt_hash(vpn, 0); for (j = 0; j < 2; j++) { slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; for (i = 0; i < HPTES_PER_GROUP; i++) { - hpte_dw0.dword0 = pSeries_lpar_hpte_getword0(slot); - dw0 = hpte_dw0.dw0; + hpte_v = pSeries_lpar_hpte_getword0(slot); - if ((dw0.avpn == (vpn >> 11)) && dw0.v && - (dw0.h == j)) { + if ((HPTE_V_AVPN_VAL(hpte_v) == (vpn >> 11)) + && (hpte_v & HPTE_V_VALID) + && (!!(hpte_v & HPTE_V_SECONDARY) == j)) { /* HPTE matches */ if (j) slot = -slot; diff --git a/arch/ppc64/kernel/pSeries_pci.c b/arch/ppc64/kernel/pSeries_pci.c index 0b1cca281408..1f5f141fb7a1 100644 --- a/arch/ppc64/kernel/pSeries_pci.c +++ b/arch/ppc64/kernel/pSeries_pci.c @@ -1,13 +1,11 @@ /* - * pSeries_pci.c + * arch/ppc64/kernel/pSeries_pci.c * * Copyright (C) 2001 Dave Engebretsen, IBM Corporation * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM * * pSeries specific routines for PCI. * - * Based on code from pci.c and chrp_pci.c - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -23,430 +21,18 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/init.h> +#include <linux/ioport.h> #include <linux/kernel.h> -#include <linux/threads.h> #include <linux/pci.h> #include <linux/string.h> -#include <linux/init.h> -#include <linux/bootmem.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/irq.h> -#include <asm/prom.h> -#include <asm/machdep.h> #include <asm/pci-bridge.h> -#include <asm/iommu.h> -#include <asm/rtas.h> +#include <asm/prom.h> -#include "mpic.h" #include "pci.h" -/* RTAS tokens */ -static int read_pci_config; -static int write_pci_config; -static int ibm_read_pci_config; -static int ibm_write_pci_config; - -static int s7a_workaround; - -extern struct mpic *pSeries_mpic; - -static int config_access_valid(struct device_node *dn, int where) -{ - if (where < 256) - return 1; - if (where < 4096 && dn->pci_ext_config_space) - return 1; - - return 0; -} - -static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val) -{ - int returnval = -1; - unsigned long buid, addr; - int ret; - - if (!dn) - return PCIBIOS_DEVICE_NOT_FOUND; - if (!config_access_valid(dn, where)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - addr = ((where & 0xf00) << 20) | (dn->busno << 16) | - (dn->devfn << 8) | (where & 0xff); - buid = dn->phb->buid; - if (buid) { - ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, - addr, buid >> 32, buid & 0xffffffff, size); - } else { - ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size); - } - *val = returnval; - - if (ret) - return PCIBIOS_DEVICE_NOT_FOUND; - - if (returnval == EEH_IO_ERROR_VALUE(size) - && eeh_dn_check_failure (dn, NULL)) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -static int rtas_pci_read_config(struct pci_bus *bus, - unsigned int devfn, - int where, int size, u32 *val) -{ - struct device_node *busdn, *dn; - - if (bus->self) - busdn = pci_device_to_OF_node(bus->self); - else - busdn = bus->sysdata; /* must be a phb */ - - /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->devfn == devfn) - return rtas_read_config(dn, where, size, val); - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static int rtas_write_config(struct device_node *dn, int where, int size, u32 val) -{ - unsigned long buid, addr; - int ret; - - if (!dn) - return PCIBIOS_DEVICE_NOT_FOUND; - if (!config_access_valid(dn, where)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - addr = ((where & 0xf00) << 20) | (dn->busno << 16) | - (dn->devfn << 8) | (where & 0xff); - buid = dn->phb->buid; - if (buid) { - ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val); - } else { - ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val); - } - - if (ret) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -static int rtas_pci_write_config(struct pci_bus *bus, - unsigned int devfn, - int where, int size, u32 val) -{ - struct device_node *busdn, *dn; - - if (bus->self) - busdn = pci_device_to_OF_node(bus->self); - else - busdn = bus->sysdata; /* must be a phb */ - - /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->devfn == devfn) - return rtas_write_config(dn, where, size, val); - return PCIBIOS_DEVICE_NOT_FOUND; -} - -struct pci_ops rtas_pci_ops = { - rtas_pci_read_config, - rtas_pci_write_config -}; - -int is_python(struct device_node *dev) -{ - char *model = (char *)get_property(dev, "model", NULL); - - if (model && strstr(model, "Python")) - return 1; - - return 0; -} - -static int get_phb_reg_prop(struct device_node *dev, - unsigned int addr_size_words, - struct reg_property64 *reg) -{ - unsigned int *ui_ptr = NULL, len; - - /* Found a PHB, now figure out where his registers are mapped. */ - ui_ptr = (unsigned int *)get_property(dev, "reg", &len); - if (ui_ptr == NULL) - return 1; - - if (addr_size_words == 1) { - reg->address = ((struct reg_property32 *)ui_ptr)->address; - reg->size = ((struct reg_property32 *)ui_ptr)->size; - } else { - *reg = *((struct reg_property64 *)ui_ptr); - } - - return 0; -} - -static void python_countermeasures(struct device_node *dev, - unsigned int addr_size_words) -{ - struct reg_property64 reg_struct; - void __iomem *chip_regs; - volatile u32 val; - - if (get_phb_reg_prop(dev, addr_size_words, ®_struct)) - return; - - /* Python's register file is 1 MB in size. */ - chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000); - - /* - * Firmware doesn't always clear this bit which is critical - * for good performance - Anton - */ - -#define PRG_CL_RESET_VALID 0x00010000 - - val = in_be32(chip_regs + 0xf6030); - if (val & PRG_CL_RESET_VALID) { - printk(KERN_INFO "Python workaround: "); - val &= ~PRG_CL_RESET_VALID; - out_be32(chip_regs + 0xf6030, val); - /* - * We must read it back for changes to - * take effect - */ - val = in_be32(chip_regs + 0xf6030); - printk("reg0: %x\n", val); - } - - iounmap(chip_regs); -} - -void __init init_pci_config_tokens (void) -{ - read_pci_config = rtas_token("read-pci-config"); - write_pci_config = rtas_token("write-pci-config"); - ibm_read_pci_config = rtas_token("ibm,read-pci-config"); - ibm_write_pci_config = rtas_token("ibm,write-pci-config"); -} - -unsigned long __devinit get_phb_buid (struct device_node *phb) -{ - int addr_cells; - unsigned int *buid_vals; - unsigned int len; - unsigned long buid; - - if (ibm_read_pci_config == -1) return 0; - - /* PHB's will always be children of the root node, - * or so it is promised by the current firmware. */ - if (phb->parent == NULL) - return 0; - if (phb->parent->parent) - return 0; - - buid_vals = (unsigned int *) get_property(phb, "reg", &len); - if (buid_vals == NULL) - return 0; - - addr_cells = prom_n_addr_cells(phb); - if (addr_cells == 1) { - buid = (unsigned long) buid_vals[0]; - } else { - buid = (((unsigned long)buid_vals[0]) << 32UL) | - (((unsigned long)buid_vals[1]) & 0xffffffff); - } - return buid; -} - -static int phb_set_bus_ranges(struct device_node *dev, - struct pci_controller *phb) -{ - int *bus_range; - unsigned int len; - - bus_range = (int *) get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - return 1; - } - - phb->first_busno = bus_range[0]; - phb->last_busno = bus_range[1]; - - return 0; -} - -static int __devinit setup_phb(struct device_node *dev, - struct pci_controller *phb, - unsigned int addr_size_words) -{ - pci_setup_pci_controller(phb); - - if (is_python(dev)) - python_countermeasures(dev, addr_size_words); - - if (phb_set_bus_ranges(dev, phb)) - return 1; - - phb->arch_data = dev; - phb->ops = &rtas_pci_ops; - phb->buid = get_phb_buid(dev); - - return 0; -} - -static void __devinit add_linux_pci_domain(struct device_node *dev, - struct pci_controller *phb, - struct property *of_prop) -{ - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(phb->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number)); - prom_add_property(dev, of_prop); -} - -static struct pci_controller * __init alloc_phb(struct device_node *dev, - unsigned int addr_size_words) -{ - struct pci_controller *phb; - struct property *of_prop; - - phb = alloc_bootmem(sizeof(struct pci_controller)); - if (phb == NULL) - return NULL; - - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(phb->global_number)); - if (!of_prop) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - add_linux_pci_domain(dev, phb, of_prop); - - return phb; -} - -static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words) -{ - struct pci_controller *phb; - - phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), - GFP_KERNEL); - if (phb == NULL) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - phb->is_dynamic = 1; - - /* TODO: linux,pci-domain? */ - - return phb; -} - -unsigned long __init find_and_init_phbs(void) -{ - struct device_node *node; - struct pci_controller *phb; - unsigned int root_size_cells = 0; - unsigned int index; - unsigned int *opprop = NULL; - struct device_node *root = of_find_node_by_path("/"); - - if (ppc64_interrupt_controller == IC_OPEN_PIC) { - opprop = (unsigned int *)get_property(root, - "platform-open-pic", NULL); - } - - root_size_cells = prom_n_size_cells(root); - - index = 0; - - for (node = of_get_next_child(root, NULL); - node != NULL; - node = of_get_next_child(root, node)) { - if (node->type == NULL || strcmp(node->type, "pci") != 0) - continue; - - phb = alloc_phb(node, root_size_cells); - if (!phb) - continue; - - pci_process_bridge_OF_ranges(phb, node); - pci_setup_phb_io(phb, index == 0); - - if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) { - int addr = root_size_cells * (index + 2) - 1; - mpic_assign_isu(pSeries_mpic, index, opprop[addr]); - } - - index++; - } - - of_node_put(root); - pci_devs_phb_init(); - - /* - * pci_probe_only and pci_assign_all_buses can be set via properties - * in chosen. - */ - if (of_chosen) { - int *prop; - - prop = (int *)get_property(of_chosen, "linux,pci-probe-only", - NULL); - if (prop) - pci_probe_only = *prop; - - prop = (int *)get_property(of_chosen, - "linux,pci-assign-all-buses", NULL); - if (prop) - pci_assign_all_buses = *prop; - } - - return 0; -} - -struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) -{ - struct device_node *root = of_find_node_by_path("/"); - unsigned int root_size_cells = 0; - struct pci_controller *phb; - struct pci_bus *bus; - int primary; - - root_size_cells = prom_n_size_cells(root); - - primary = list_empty(&hose_list); - phb = alloc_phb_dynamic(dn, root_size_cells); - if (!phb) - return NULL; - - pci_process_bridge_OF_ranges(phb, dn); - - pci_setup_phb_io_dynamic(phb, primary); - of_node_put(root); - - pci_devs_phb_init_dynamic(phb); - phb->last_busno = 0xff; - bus = pci_scan_bus(phb->first_busno, phb->ops, phb->arch_data); - phb->bus = bus; - phb->last_busno = bus->subordinate; - - return phb; -} -EXPORT_SYMBOL(init_phb_dynamic); +static int __initdata s7a_workaround = -1; #if 0 void pcibios_name_device(struct pci_dev *dev) @@ -474,11 +60,12 @@ void pcibios_name_device(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_name_device); #endif -static void check_s7a(void) +static void __init check_s7a(void) { struct device_node *root; char *model; + s7a_workaround = 0; root = of_find_node_by_path("/"); if (root) { model = get_property(root, "model", NULL); @@ -488,55 +75,23 @@ static void check_s7a(void) } } -/* RPA-specific bits for removing PHBs */ -int pcibios_remove_root_bus(struct pci_controller *phb) +void __devinit pSeries_irq_bus_setup(struct pci_bus *bus) { - struct pci_bus *b = phb->bus; - struct resource *res; - int rc, i; - - res = b->resource[0]; - if (!res->flags) { - printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__, - b->name); - return 1; - } - - rc = unmap_bus_range(b); - if (rc) { - printk(KERN_ERR "%s: failed to unmap IO on bus %s\n", - __FUNCTION__, b->name); - return 1; - } + struct pci_dev *dev; - if (release_resource(res)) { - printk(KERN_ERR "%s: failed to release IO on bus %s\n", - __FUNCTION__, b->name); - return 1; - } - - for (i = 1; i < 3; ++i) { - res = b->resource[i]; - if (!res->flags && i == 0) { - printk(KERN_ERR "%s: no MEM resource for PHB %s\n", - __FUNCTION__, b->name); - return 1; - } - if (res->flags && release_resource(res)) { - printk(KERN_ERR - "%s: failed to release IO %d on bus %s\n", - __FUNCTION__, i, b->name); - return 1; + if (s7a_workaround < 0) + check_s7a(); + list_for_each_entry(dev, &bus->devices, bus_list) { + pci_read_irq_line(dev); + if (s7a_workaround) { + if (dev->irq > 16) { + dev->irq -= 3; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + dev->irq); + } } } - - list_del(&phb->list_node); - if (phb->is_dynamic) - kfree(phb); - - return 0; } -EXPORT_SYMBOL(pcibios_remove_root_bus); static void __init pSeries_request_regions(void) { @@ -553,20 +108,6 @@ static void __init pSeries_request_regions(void) void __init pSeries_final_fixup(void) { - struct pci_dev *dev = NULL; - - check_s7a(); - - for_each_pci_dev(dev) { - pci_read_irq_line(dev); - if (s7a_workaround) { - if (dev->irq > 16) { - dev->irq -= 3; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } - } - } - phbs_remap_io(); pSeries_request_regions(); diff --git a/arch/ppc64/kernel/pSeries_setup.c b/arch/ppc64/kernel/pSeries_setup.c index 6c0d1d58a552..5bec956e44a0 100644 --- a/arch/ppc64/kernel/pSeries_setup.c +++ b/arch/ppc64/kernel/pSeries_setup.c @@ -19,6 +19,7 @@ #undef DEBUG #include <linux/config.h> +#include <linux/cpu.h> #include <linux/errno.h> #include <linux/sched.h> #include <linux/kernel.h> @@ -71,11 +72,6 @@ #define DBG(fmt...) #endif -extern void pSeries_final_fixup(void); - -extern void pSeries_get_boot_time(struct rtc_time *rtc_time); -extern void pSeries_get_rtc_time(struct rtc_time *rtc_time); -extern int pSeries_set_rtc_time(struct rtc_time *rtc_time); extern void find_udbg_vterm(void); extern void system_reset_fwnmi(void); /* from head.S */ extern void machine_check_fwnmi(void); /* from head.S */ @@ -84,12 +80,12 @@ extern void generic_find_legacy_serial_ports(u64 *physport, int fwnmi_active; /* TRUE if an FWNMI handler is present */ -extern unsigned long ppc_proc_freq; -extern unsigned long ppc_tb_freq; - extern void pSeries_system_reset_exception(struct pt_regs *regs); extern int pSeries_machine_check_exception(struct pt_regs *regs); +static int pseries_shared_idle(void); +static int pseries_dedicated_idle(void); + static volatile void __iomem * chrp_int_ack_special; struct mpic *pSeries_mpic; @@ -195,14 +191,16 @@ static void __init pSeries_setup_arch(void) { /* Fixup ppc_md depending on the type of interrupt controller */ if (ppc64_interrupt_controller == IC_OPEN_PIC) { - ppc_md.init_IRQ = pSeries_init_mpic; + ppc_md.init_IRQ = pSeries_init_mpic; ppc_md.get_irq = mpic_get_irq; + ppc_md.cpu_irq_down = mpic_teardown_this_cpu; /* Allocate the mpic now, so that find_and_init_phbs() can * fill the ISUs */ pSeries_setup_mpic(); } else { ppc_md.init_IRQ = xics_init_IRQ; ppc_md.get_irq = xics_get_irq; + ppc_md.cpu_irq_down = xics_teardown_cpu; } #ifdef CONFIG_SMP @@ -235,6 +233,20 @@ static void __init pSeries_setup_arch(void) if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) vpa_init(boot_cpuid); + + /* Choose an idle loop */ + if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) { + if (get_paca()->lppaca.shared_proc) { + printk(KERN_INFO "Using shared processor idle loop\n"); + ppc_md.idle_loop = pseries_shared_idle; + } else { + printk(KERN_INFO "Using dedicated idle loop\n"); + ppc_md.idle_loop = pseries_dedicated_idle; + } + } else { + printk(KERN_INFO "Using default idle loop\n"); + ppc_md.idle_loop = default_idle; + } } static int __init pSeries_init_panel(void) @@ -381,171 +393,6 @@ static void __init pSeries_init_early(void) } -static void pSeries_progress(char *s, unsigned short hex) -{ - struct device_node *root; - int width, *p; - char *os; - static int display_character, set_indicator; - static int max_width; - static DEFINE_SPINLOCK(progress_lock); - static int pending_newline = 0; /* did last write end with unprinted newline? */ - - if (!rtas.base) - return; - - if (max_width == 0) { - if ((root = find_path_device("/rtas")) && - (p = (unsigned int *)get_property(root, - "ibm,display-line-length", - NULL))) - max_width = *p; - else - max_width = 0x10; - display_character = rtas_token("display-character"); - set_indicator = rtas_token("set-indicator"); - } - - if (display_character == RTAS_UNKNOWN_SERVICE) { - /* use hex display if available */ - if (set_indicator != RTAS_UNKNOWN_SERVICE) - rtas_call(set_indicator, 3, 1, NULL, 6, 0, hex); - return; - } - - spin_lock(&progress_lock); - - /* - * Last write ended with newline, but we didn't print it since - * it would just clear the bottom line of output. Print it now - * instead. - * - * If no newline is pending, print a CR to start output at the - * beginning of the line. - */ - if (pending_newline) { - rtas_call(display_character, 1, 1, NULL, '\r'); - rtas_call(display_character, 1, 1, NULL, '\n'); - pending_newline = 0; - } else { - rtas_call(display_character, 1, 1, NULL, '\r'); - } - - width = max_width; - os = s; - while (*os) { - if (*os == '\n' || *os == '\r') { - /* Blank to end of line. */ - while (width-- > 0) - rtas_call(display_character, 1, 1, NULL, ' '); - - /* If newline is the last character, save it - * until next call to avoid bumping up the - * display output. - */ - if (*os == '\n' && !os[1]) { - pending_newline = 1; - spin_unlock(&progress_lock); - return; - } - - /* RTAS wants CR-LF, not just LF */ - - if (*os == '\n') { - rtas_call(display_character, 1, 1, NULL, '\r'); - rtas_call(display_character, 1, 1, NULL, '\n'); - } else { - /* CR might be used to re-draw a line, so we'll - * leave it alone and not add LF. - */ - rtas_call(display_character, 1, 1, NULL, *os); - } - - width = max_width; - } else { - width--; - rtas_call(display_character, 1, 1, NULL, *os); - } - - os++; - - /* if we overwrite the screen length */ - if (width <= 0) - while ((*os != 0) && (*os != '\n') && (*os != '\r')) - os++; - } - - /* Blank to end of line. */ - while (width-- > 0) - rtas_call(display_character, 1, 1, NULL, ' '); - - spin_unlock(&progress_lock); -} - -extern void setup_default_decr(void); - -/* Some sane defaults: 125 MHz timebase, 1GHz processor */ -#define DEFAULT_TB_FREQ 125000000UL -#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) - -static void __init pSeries_calibrate_decr(void) -{ - struct device_node *cpu; - struct div_result divres; - unsigned int *fp; - int node_found; - - /* - * The cpu node should have a timebase-frequency property - * to tell us the rate at which the decrementer counts. - */ - cpu = of_find_node_by_type(NULL, "cpu"); - - ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */ - node_found = 0; - if (cpu != 0) { - fp = (unsigned int *)get_property(cpu, "timebase-frequency", - NULL); - if (fp != 0) { - node_found = 1; - ppc_tb_freq = *fp; - } - } - if (!node_found) - printk(KERN_ERR "WARNING: Estimating decrementer frequency " - "(not found)\n"); - - ppc_proc_freq = DEFAULT_PROC_FREQ; - node_found = 0; - if (cpu != 0) { - fp = (unsigned int *)get_property(cpu, "clock-frequency", - NULL); - if (fp != 0) { - node_found = 1; - ppc_proc_freq = *fp; - } - } - if (!node_found) - printk(KERN_ERR "WARNING: Estimating processor frequency " - "(not found)\n"); - - of_node_put(cpu); - - printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", - ppc_tb_freq/1000000, ppc_tb_freq%1000000); - printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n", - ppc_proc_freq/1000000, ppc_proc_freq%1000000); - - tb_ticks_per_jiffy = ppc_tb_freq / HZ; - tb_ticks_per_sec = tb_ticks_per_jiffy * HZ; - tb_ticks_per_usec = ppc_tb_freq / 1000000; - tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); - div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres); - tb_to_xs = divres.result_low; - - setup_default_decr(); -} - static int pSeries_check_legacy_ioport(unsigned int baseport) { struct device_node *np; @@ -589,6 +436,144 @@ static int __init pSeries_probe(int platform) return 1; } +DECLARE_PER_CPU(unsigned long, smt_snooze_delay); + +static inline void dedicated_idle_sleep(unsigned int cpu) +{ + struct paca_struct *ppaca = &paca[cpu ^ 1]; + + /* Only sleep if the other thread is not idle */ + if (!(ppaca->lppaca.idle)) { + local_irq_disable(); + + /* + * We are about to sleep the thread and so wont be polling any + * more. + */ + clear_thread_flag(TIF_POLLING_NRFLAG); + + /* + * SMT dynamic mode. Cede will result in this thread going + * dormant, if the partner thread is still doing work. Thread + * wakes up if partner goes idle, an interrupt is presented, or + * a prod occurs. Returning from the cede enables external + * interrupts. + */ + if (!need_resched()) + cede_processor(); + else + local_irq_enable(); + } else { + /* + * Give the HV an opportunity at the processor, since we are + * not doing any work. + */ + poll_pending(); + } +} + +static int pseries_dedicated_idle(void) +{ + long oldval; + struct paca_struct *lpaca = get_paca(); + unsigned int cpu = smp_processor_id(); + unsigned long start_snooze; + unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay); + + while (1) { + /* + * Indicate to the HV that we are idle. Now would be + * a good time to find other work to dispatch. + */ + lpaca->lppaca.idle = 1; + + oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); + if (!oldval) { + set_thread_flag(TIF_POLLING_NRFLAG); + + start_snooze = __get_tb() + + *smt_snooze_delay * tb_ticks_per_usec; + + while (!need_resched() && !cpu_is_offline(cpu)) { + ppc64_runlatch_off(); + + /* + * Go into low thread priority and possibly + * low power mode. + */ + HMT_low(); + HMT_very_low(); + + if (*smt_snooze_delay != 0 && + __get_tb() > start_snooze) { + HMT_medium(); + dedicated_idle_sleep(cpu); + } + + } + + HMT_medium(); + clear_thread_flag(TIF_POLLING_NRFLAG); + } else { + set_need_resched(); + } + + lpaca->lppaca.idle = 0; + ppc64_runlatch_on(); + + schedule(); + + if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) + cpu_die(); + } +} + +static int pseries_shared_idle(void) +{ + struct paca_struct *lpaca = get_paca(); + unsigned int cpu = smp_processor_id(); + + while (1) { + /* + * Indicate to the HV that we are idle. Now would be + * a good time to find other work to dispatch. + */ + lpaca->lppaca.idle = 1; + + while (!need_resched() && !cpu_is_offline(cpu)) { + local_irq_disable(); + ppc64_runlatch_off(); + + /* + * Yield the processor to the hypervisor. We return if + * an external interrupt occurs (which are driven prior + * to returning here) or if a prod occurs from another + * processor. When returning here, external interrupts + * are enabled. + * + * Check need_resched() again with interrupts disabled + * to avoid a race. + */ + if (!need_resched()) + cede_processor(); + else + local_irq_enable(); + + HMT_medium(); + } + + lpaca->lppaca.idle = 0; + ppc64_runlatch_on(); + + schedule(); + + if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) + cpu_die(); + } + + return 0; +} + struct machdep_calls __initdata pSeries_md = { .probe = pSeries_probe, .setup_arch = pSeries_setup_arch, @@ -596,16 +581,17 @@ struct machdep_calls __initdata pSeries_md = { .get_cpuinfo = pSeries_get_cpuinfo, .log_error = pSeries_log_error, .pcibios_fixup = pSeries_final_fixup, + .irq_bus_setup = pSeries_irq_bus_setup, .restart = rtas_restart, .power_off = rtas_power_off, .halt = rtas_halt, .panic = rtas_os_term, .cpu_die = pSeries_mach_cpu_die, - .get_boot_time = pSeries_get_boot_time, - .get_rtc_time = pSeries_get_rtc_time, - .set_rtc_time = pSeries_set_rtc_time, - .calibrate_decr = pSeries_calibrate_decr, - .progress = pSeries_progress, + .get_boot_time = rtas_get_boot_time, + .get_rtc_time = rtas_get_rtc_time, + .set_rtc_time = rtas_set_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .progress = rtas_progress, .check_legacy_ioport = pSeries_check_legacy_ioport, .system_reset_exception = pSeries_system_reset_exception, .machine_check_exception = pSeries_machine_check_exception, diff --git a/arch/ppc64/kernel/pSeries_smp.c b/arch/ppc64/kernel/pSeries_smp.c index 4203bd020c82..62c55a123560 100644 --- a/arch/ppc64/kernel/pSeries_smp.c +++ b/arch/ppc64/kernel/pSeries_smp.c @@ -1,5 +1,5 @@ /* - * SMP support for pSeries machines. + * SMP support for pSeries and BPA machines. * * Dave Engebretsen, Peter Bergner, and * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com @@ -47,6 +47,7 @@ #include <asm/pSeries_reconfig.h> #include "mpic.h" +#include "bpa_iic.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -92,10 +93,13 @@ static int query_cpu_stopped(unsigned int pcpu) int pSeries_cpu_disable(void) { + int cpu = smp_processor_id(); + + cpu_clear(cpu, cpu_online_map); systemcfg->processorCount--; /*fix boot_cpuid here*/ - if (smp_processor_id() == boot_cpuid) + if (cpu == boot_cpuid) boot_cpuid = any_online_cpu(cpu_online_map); /* FIXME: abstract this to not be platform specific later on */ @@ -286,6 +290,7 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu) return 1; } +#ifdef CONFIG_XICS static inline void smp_xics_do_message(int cpu, int msg) { set_bit(msg, &xics_ipi_message[cpu].value); @@ -327,6 +332,37 @@ static void __devinit smp_xics_setup_cpu(int cpu) cpu_clear(cpu, of_spin_map); } +#endif /* CONFIG_XICS */ +#ifdef CONFIG_BPA_IIC +static void smp_iic_message_pass(int target, int msg) +{ + unsigned int i; + + if (target < NR_CPUS) { + iic_cause_IPI(target, msg); + } else { + for_each_online_cpu(i) { + if (target == MSG_ALL_BUT_SELF + && i == smp_processor_id()) + continue; + iic_cause_IPI(i, msg); + } + } +} + +static int __init smp_iic_probe(void) +{ + iic_request_IPIs(); + + return cpus_weight(cpu_possible_map); +} + +static void __devinit smp_iic_setup_cpu(int cpu) +{ + if (cpu != boot_cpuid) + iic_setup_cpu(); +} +#endif /* CONFIG_BPA_IIC */ static DEFINE_SPINLOCK(timebase_lock); static unsigned long timebase = 0; @@ -381,14 +417,15 @@ static int smp_pSeries_cpu_bootable(unsigned int nr) return 1; } - +#ifdef CONFIG_MPIC static struct smp_ops_t pSeries_mpic_smp_ops = { .message_pass = smp_mpic_message_pass, .probe = smp_mpic_probe, .kick_cpu = smp_pSeries_kick_cpu, .setup_cpu = smp_mpic_setup_cpu, }; - +#endif +#ifdef CONFIG_XICS static struct smp_ops_t pSeries_xics_smp_ops = { .message_pass = smp_xics_message_pass, .probe = smp_xics_probe, @@ -396,6 +433,16 @@ static struct smp_ops_t pSeries_xics_smp_ops = { .setup_cpu = smp_xics_setup_cpu, .cpu_bootable = smp_pSeries_cpu_bootable, }; +#endif +#ifdef CONFIG_BPA_IIC +static struct smp_ops_t bpa_iic_smp_ops = { + .message_pass = smp_iic_message_pass, + .probe = smp_iic_probe, + .kick_cpu = smp_pSeries_kick_cpu, + .setup_cpu = smp_iic_setup_cpu, + .cpu_bootable = smp_pSeries_cpu_bootable, +}; +#endif /* This is called very early */ void __init smp_init_pSeries(void) @@ -404,10 +451,25 @@ void __init smp_init_pSeries(void) DBG(" -> smp_init_pSeries()\n"); - if (ppc64_interrupt_controller == IC_OPEN_PIC) + switch (ppc64_interrupt_controller) { +#ifdef CONFIG_MPIC + case IC_OPEN_PIC: smp_ops = &pSeries_mpic_smp_ops; - else + break; +#endif +#ifdef CONFIG_XICS + case IC_PPC_XIC: smp_ops = &pSeries_xics_smp_ops; + break; +#endif +#ifdef CONFIG_BPA_IIC + case IC_BPA_IIC: + smp_ops = &bpa_iic_smp_ops; + break; +#endif + default: + panic("Invalid interrupt controller"); + } #ifdef CONFIG_HOTPLUG_CPU smp_ops->cpu_disable = pSeries_cpu_disable; diff --git a/arch/ppc64/kernel/pacaData.c b/arch/ppc64/kernel/pacaData.c index a3e0975c26c1..6316188737b6 100644 --- a/arch/ppc64/kernel/pacaData.c +++ b/arch/ppc64/kernel/pacaData.c @@ -42,21 +42,7 @@ extern unsigned long __toc_start; * processors. The processor VPD array needs one entry per physical * processor (not thread). */ -#ifdef CONFIG_PPC_ISERIES -#define EXTRA_INITS(number, lpq) \ - .lppaca_ptr = &paca[number].lppaca, \ - .lpqueue_ptr = (lpq), /* &xItLpQueue, */ \ - .reg_save_ptr = &paca[number].reg_save, \ - .reg_save = { \ - .xDesc = 0xd397d9e2, /* "LpRS" */ \ - .xSize = sizeof(struct ItLpRegSave) \ - }, -#else -#define EXTRA_INITS(number, lpq) -#endif - -#define PACAINITDATA(number,start,lpq,asrr,asrv) \ -{ \ +#define PACA_INIT_COMMON(number, start, asrr, asrv) \ .lock_token = 0x8000, \ .paca_index = (number), /* Paca Index */ \ .default_decr = 0x00ff0000, /* Initial Decr */ \ @@ -74,147 +60,79 @@ extern unsigned long __toc_start; .end_of_quantum = 0xfffffffffffffffful, \ .slb_count = 64, \ }, \ - EXTRA_INITS((number), (lpq)) \ -} -struct paca_struct paca[] = { #ifdef CONFIG_PPC_ISERIES - PACAINITDATA( 0, 1, &xItLpQueue, 0, STAB0_VIRT_ADDR), +#define PACA_INIT_ISERIES(number) \ + .lppaca_ptr = &paca[number].lppaca, \ + .reg_save_ptr = &paca[number].reg_save, \ + .reg_save = { \ + .xDesc = 0xd397d9e2, /* "LpRS" */ \ + .xSize = sizeof(struct ItLpRegSave) \ + } + +#define PACA_INIT(number) \ +{ \ + PACA_INIT_COMMON(number, 0, 0, 0) \ + PACA_INIT_ISERIES(number) \ +} + +#define BOOTCPU_PACA_INIT(number) \ +{ \ + PACA_INIT_COMMON(number, 1, 0, STAB0_VIRT_ADDR) \ + PACA_INIT_ISERIES(number) \ +} + #else - PACAINITDATA( 0, 1, NULL, STAB0_PHYS_ADDR, STAB0_VIRT_ADDR), +#define PACA_INIT(number) \ +{ \ + PACA_INIT_COMMON(number, 0, 0, 0) \ +} + +#define BOOTCPU_PACA_INIT(number) \ +{ \ + PACA_INIT_COMMON(number, 1, STAB0_PHYS_ADDR, STAB0_VIRT_ADDR) \ +} #endif + +struct paca_struct paca[] = { + BOOTCPU_PACA_INIT(0), #if NR_CPUS > 1 - PACAINITDATA( 1, 0, NULL, 0, 0), - PACAINITDATA( 2, 0, NULL, 0, 0), - PACAINITDATA( 3, 0, NULL, 0, 0), + PACA_INIT( 1), PACA_INIT( 2), PACA_INIT( 3), #if NR_CPUS > 4 - PACAINITDATA( 4, 0, NULL, 0, 0), - PACAINITDATA( 5, 0, NULL, 0, 0), - PACAINITDATA( 6, 0, NULL, 0, 0), - PACAINITDATA( 7, 0, NULL, 0, 0), + PACA_INIT( 4), PACA_INIT( 5), PACA_INIT( 6), PACA_INIT( 7), #if NR_CPUS > 8 - PACAINITDATA( 8, 0, NULL, 0, 0), - PACAINITDATA( 9, 0, NULL, 0, 0), - PACAINITDATA(10, 0, NULL, 0, 0), - PACAINITDATA(11, 0, NULL, 0, 0), - PACAINITDATA(12, 0, NULL, 0, 0), - PACAINITDATA(13, 0, NULL, 0, 0), - PACAINITDATA(14, 0, NULL, 0, 0), - PACAINITDATA(15, 0, NULL, 0, 0), - PACAINITDATA(16, 0, NULL, 0, 0), - PACAINITDATA(17, 0, NULL, 0, 0), - PACAINITDATA(18, 0, NULL, 0, 0), - PACAINITDATA(19, 0, NULL, 0, 0), - PACAINITDATA(20, 0, NULL, 0, 0), - PACAINITDATA(21, 0, NULL, 0, 0), - PACAINITDATA(22, 0, NULL, 0, 0), - PACAINITDATA(23, 0, NULL, 0, 0), - PACAINITDATA(24, 0, NULL, 0, 0), - PACAINITDATA(25, 0, NULL, 0, 0), - PACAINITDATA(26, 0, NULL, 0, 0), - PACAINITDATA(27, 0, NULL, 0, 0), - PACAINITDATA(28, 0, NULL, 0, 0), - PACAINITDATA(29, 0, NULL, 0, 0), - PACAINITDATA(30, 0, NULL, 0, 0), - PACAINITDATA(31, 0, NULL, 0, 0), + PACA_INIT( 8), PACA_INIT( 9), PACA_INIT( 10), PACA_INIT( 11), + PACA_INIT( 12), PACA_INIT( 13), PACA_INIT( 14), PACA_INIT( 15), + PACA_INIT( 16), PACA_INIT( 17), PACA_INIT( 18), PACA_INIT( 19), + PACA_INIT( 20), PACA_INIT( 21), PACA_INIT( 22), PACA_INIT( 23), + PACA_INIT( 24), PACA_INIT( 25), PACA_INIT( 26), PACA_INIT( 27), + PACA_INIT( 28), PACA_INIT( 29), PACA_INIT( 30), PACA_INIT( 31), #if NR_CPUS > 32 - PACAINITDATA(32, 0, NULL, 0, 0), - PACAINITDATA(33, 0, NULL, 0, 0), - PACAINITDATA(34, 0, NULL, 0, 0), - PACAINITDATA(35, 0, NULL, 0, 0), - PACAINITDATA(36, 0, NULL, 0, 0), - PACAINITDATA(37, 0, NULL, 0, 0), - PACAINITDATA(38, 0, NULL, 0, 0), - PACAINITDATA(39, 0, NULL, 0, 0), - PACAINITDATA(40, 0, NULL, 0, 0), - PACAINITDATA(41, 0, NULL, 0, 0), - PACAINITDATA(42, 0, NULL, 0, 0), - PACAINITDATA(43, 0, NULL, 0, 0), - PACAINITDATA(44, 0, NULL, 0, 0), - PACAINITDATA(45, 0, NULL, 0, 0), - PACAINITDATA(46, 0, NULL, 0, 0), - PACAINITDATA(47, 0, NULL, 0, 0), - PACAINITDATA(48, 0, NULL, 0, 0), - PACAINITDATA(49, 0, NULL, 0, 0), - PACAINITDATA(50, 0, NULL, 0, 0), - PACAINITDATA(51, 0, NULL, 0, 0), - PACAINITDATA(52, 0, NULL, 0, 0), - PACAINITDATA(53, 0, NULL, 0, 0), - PACAINITDATA(54, 0, NULL, 0, 0), - PACAINITDATA(55, 0, NULL, 0, 0), - PACAINITDATA(56, 0, NULL, 0, 0), - PACAINITDATA(57, 0, NULL, 0, 0), - PACAINITDATA(58, 0, NULL, 0, 0), - PACAINITDATA(59, 0, NULL, 0, 0), - PACAINITDATA(60, 0, NULL, 0, 0), - PACAINITDATA(61, 0, NULL, 0, 0), - PACAINITDATA(62, 0, NULL, 0, 0), - PACAINITDATA(63, 0, NULL, 0, 0), + PACA_INIT( 32), PACA_INIT( 33), PACA_INIT( 34), PACA_INIT( 35), + PACA_INIT( 36), PACA_INIT( 37), PACA_INIT( 38), PACA_INIT( 39), + PACA_INIT( 40), PACA_INIT( 41), PACA_INIT( 42), PACA_INIT( 43), + PACA_INIT( 44), PACA_INIT( 45), PACA_INIT( 46), PACA_INIT( 47), + PACA_INIT( 48), PACA_INIT( 49), PACA_INIT( 50), PACA_INIT( 51), + PACA_INIT( 52), PACA_INIT( 53), PACA_INIT( 54), PACA_INIT( 55), + PACA_INIT( 56), PACA_INIT( 57), PACA_INIT( 58), PACA_INIT( 59), + PACA_INIT( 60), PACA_INIT( 61), PACA_INIT( 62), PACA_INIT( 63), #if NR_CPUS > 64 - PACAINITDATA(64, 0, NULL, 0, 0), - PACAINITDATA(65, 0, NULL, 0, 0), - PACAINITDATA(66, 0, NULL, 0, 0), - PACAINITDATA(67, 0, NULL, 0, 0), - PACAINITDATA(68, 0, NULL, 0, 0), - PACAINITDATA(69, 0, NULL, 0, 0), - PACAINITDATA(70, 0, NULL, 0, 0), - PACAINITDATA(71, 0, NULL, 0, 0), - PACAINITDATA(72, 0, NULL, 0, 0), - PACAINITDATA(73, 0, NULL, 0, 0), - PACAINITDATA(74, 0, NULL, 0, 0), - PACAINITDATA(75, 0, NULL, 0, 0), - PACAINITDATA(76, 0, NULL, 0, 0), - PACAINITDATA(77, 0, NULL, 0, 0), - PACAINITDATA(78, 0, NULL, 0, 0), - PACAINITDATA(79, 0, NULL, 0, 0), - PACAINITDATA(80, 0, NULL, 0, 0), - PACAINITDATA(81, 0, NULL, 0, 0), - PACAINITDATA(82, 0, NULL, 0, 0), - PACAINITDATA(83, 0, NULL, 0, 0), - PACAINITDATA(84, 0, NULL, 0, 0), - PACAINITDATA(85, 0, NULL, 0, 0), - PACAINITDATA(86, 0, NULL, 0, 0), - PACAINITDATA(87, 0, NULL, 0, 0), - PACAINITDATA(88, 0, NULL, 0, 0), - PACAINITDATA(89, 0, NULL, 0, 0), - PACAINITDATA(90, 0, NULL, 0, 0), - PACAINITDATA(91, 0, NULL, 0, 0), - PACAINITDATA(92, 0, NULL, 0, 0), - PACAINITDATA(93, 0, NULL, 0, 0), - PACAINITDATA(94, 0, NULL, 0, 0), - PACAINITDATA(95, 0, NULL, 0, 0), - PACAINITDATA(96, 0, NULL, 0, 0), - PACAINITDATA(97, 0, NULL, 0, 0), - PACAINITDATA(98, 0, NULL, 0, 0), - PACAINITDATA(99, 0, NULL, 0, 0), - PACAINITDATA(100, 0, NULL, 0, 0), - PACAINITDATA(101, 0, NULL, 0, 0), - PACAINITDATA(102, 0, NULL, 0, 0), - PACAINITDATA(103, 0, NULL, 0, 0), - PACAINITDATA(104, 0, NULL, 0, 0), - PACAINITDATA(105, 0, NULL, 0, 0), - PACAINITDATA(106, 0, NULL, 0, 0), - PACAINITDATA(107, 0, NULL, 0, 0), - PACAINITDATA(108, 0, NULL, 0, 0), - PACAINITDATA(109, 0, NULL, 0, 0), - PACAINITDATA(110, 0, NULL, 0, 0), - PACAINITDATA(111, 0, NULL, 0, 0), - PACAINITDATA(112, 0, NULL, 0, 0), - PACAINITDATA(113, 0, NULL, 0, 0), - PACAINITDATA(114, 0, NULL, 0, 0), - PACAINITDATA(115, 0, NULL, 0, 0), - PACAINITDATA(116, 0, NULL, 0, 0), - PACAINITDATA(117, 0, NULL, 0, 0), - PACAINITDATA(118, 0, NULL, 0, 0), - PACAINITDATA(119, 0, NULL, 0, 0), - PACAINITDATA(120, 0, NULL, 0, 0), - PACAINITDATA(121, 0, NULL, 0, 0), - PACAINITDATA(122, 0, NULL, 0, 0), - PACAINITDATA(123, 0, NULL, 0, 0), - PACAINITDATA(124, 0, NULL, 0, 0), - PACAINITDATA(125, 0, NULL, 0, 0), - PACAINITDATA(126, 0, NULL, 0, 0), - PACAINITDATA(127, 0, NULL, 0, 0), + PACA_INIT( 64), PACA_INIT( 65), PACA_INIT( 66), PACA_INIT( 67), + PACA_INIT( 68), PACA_INIT( 69), PACA_INIT( 70), PACA_INIT( 71), + PACA_INIT( 72), PACA_INIT( 73), PACA_INIT( 74), PACA_INIT( 75), + PACA_INIT( 76), PACA_INIT( 77), PACA_INIT( 78), PACA_INIT( 79), + PACA_INIT( 80), PACA_INIT( 81), PACA_INIT( 82), PACA_INIT( 83), + PACA_INIT( 84), PACA_INIT( 85), PACA_INIT( 86), PACA_INIT( 87), + PACA_INIT( 88), PACA_INIT( 89), PACA_INIT( 90), PACA_INIT( 91), + PACA_INIT( 92), PACA_INIT( 93), PACA_INIT( 94), PACA_INIT( 95), + PACA_INIT( 96), PACA_INIT( 97), PACA_INIT( 98), PACA_INIT( 99), + PACA_INIT(100), PACA_INIT(101), PACA_INIT(102), PACA_INIT(103), + PACA_INIT(104), PACA_INIT(105), PACA_INIT(106), PACA_INIT(107), + PACA_INIT(108), PACA_INIT(109), PACA_INIT(110), PACA_INIT(111), + PACA_INIT(112), PACA_INIT(113), PACA_INIT(114), PACA_INIT(115), + PACA_INIT(116), PACA_INIT(117), PACA_INIT(118), PACA_INIT(119), + PACA_INIT(120), PACA_INIT(121), PACA_INIT(122), PACA_INIT(123), + PACA_INIT(124), PACA_INIT(125), PACA_INIT(126), PACA_INIT(127), #endif #endif #endif diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c index 2bf0513f3eca..d0d55c7908ef 100644 --- a/arch/ppc64/kernel/pci.c +++ b/arch/ppc64/kernel/pci.c @@ -108,8 +108,28 @@ void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region region->end = res->end - offset; } +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + unsigned long offset = 0; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + + if (!hose) + return; + + if (res->flags & IORESOURCE_IO) + offset = (unsigned long)hose->io_base_virt - pci_io_base; + + if (res->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; + + res->start = region->start + offset; + res->end = region->end + offset; +} + #ifdef CONFIG_HOTPLUG EXPORT_SYMBOL(pcibios_resource_to_bus); +EXPORT_SYMBOL(pcibios_bus_to_resource); #endif /* @@ -351,7 +371,7 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, *offset += hose->pci_mem_offset; res_bit = IORESOURCE_MEM; } else { - io_offset = (unsigned long)hose->io_base_virt; + io_offset = (unsigned long)hose->io_base_virt - pci_io_base; *offset += io_offset; res_bit = IORESOURCE_IO; } @@ -378,7 +398,7 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, /* found it! construct the final physical address */ if (mmap_state == pci_mmap_io) - *offset += hose->io_base_phys - io_offset; + *offset += hose->io_base_phys - io_offset; return rp; } @@ -902,6 +922,9 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) ppc_md.iommu_dev_setup(dev); + if (ppc_md.irq_bus_setup) + ppc_md.irq_bus_setup(bus); + if (!pci_probe_only) return; @@ -941,4 +964,22 @@ int pci_read_irq_line(struct pci_dev *pci_dev) } EXPORT_SYMBOL(pci_read_irq_line); +void pci_resource_to_user(const struct pci_dev *dev, int bar, + const struct resource *rsrc, + u64 *start, u64 *end) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned long offset = 0; + + if (hose == NULL) + return; + + if (rsrc->flags & IORESOURCE_IO) + offset = pci_io_base - (unsigned long)hose->io_base_virt + + hose->io_base_phys; + + *start = rsrc->start + offset; + *end = rsrc->end + offset; +} + #endif /* CONFIG_PPC_MULTIPLATFORM */ diff --git a/arch/ppc64/kernel/pci.h b/arch/ppc64/kernel/pci.h index 0fd7d849aa77..26be78b13af1 100644 --- a/arch/ppc64/kernel/pci.h +++ b/arch/ppc64/kernel/pci.h @@ -40,10 +40,14 @@ struct device_node *fetch_dev_dn(struct pci_dev *dev); void pci_addr_cache_insert_device(struct pci_dev *dev); void pci_addr_cache_remove_device(struct pci_dev *dev); -/* From pSeries_pci.h */ +/* From rtas_pci.h */ void init_pci_config_tokens (void); unsigned long get_phb_buid (struct device_node *); +/* From pSeries_pci.h */ +extern void pSeries_final_fixup(void); +extern void pSeries_irq_bus_setup(struct pci_bus *bus); + extern unsigned long pci_probe_only; extern unsigned long pci_assign_all_buses; extern int pci_read_irq_line(struct pci_dev *pci_dev); diff --git a/arch/ppc64/kernel/pmac_setup.c b/arch/ppc64/kernel/pmac_setup.c index 6cf03d387b91..e40877fa67cd 100644 --- a/arch/ppc64/kernel/pmac_setup.c +++ b/arch/ppc64/kernel/pmac_setup.c @@ -97,7 +97,7 @@ EXPORT_SYMBOL(smu_cmdbuf_abs); extern void udbg_init_scc(struct device_node *np); -void __pmac pmac_show_cpuinfo(struct seq_file *m) +static void __pmac pmac_show_cpuinfo(struct seq_file *m) { struct device_node *np; char *pp; @@ -144,7 +144,7 @@ void __pmac pmac_show_cpuinfo(struct seq_file *m) } -void __init pmac_setup_arch(void) +static void __init pmac_setup_arch(void) { /* init to some ~sane value until calibrate_delay() runs */ loops_per_jiffy = 50000000; @@ -186,6 +186,8 @@ void __init pmac_setup_arch(void) #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; #endif + + printk(KERN_INFO "Using native/NAP idle loop\n"); } #ifdef CONFIG_SCSI @@ -228,7 +230,7 @@ void __pmac note_bootable_part(dev_t dev, int part, int goodness) } } -void __pmac pmac_restart(char *cmd) +static void __pmac pmac_restart(char *cmd) { switch(sys_ctrler) { #ifdef CONFIG_ADB_PMU @@ -247,7 +249,7 @@ void __pmac pmac_restart(char *cmd) } } -void __pmac pmac_power_off(void) +static void __pmac pmac_power_off(void) { switch(sys_ctrler) { #ifdef CONFIG_ADB_PMU @@ -265,7 +267,7 @@ void __pmac pmac_power_off(void) } } -void __pmac pmac_halt(void) +static void __pmac pmac_halt(void) { pmac_power_off(); } @@ -325,7 +327,7 @@ static void __init init_boot_display(void) /* * Early initialization. */ -void __init pmac_init_early(void) +static void __init pmac_init_early(void) { DBG(" -> pmac_init_early\n"); @@ -507,5 +509,6 @@ struct machdep_calls __initdata pmac_md = { .calibrate_decr = pmac_calibrate_decr, .feature_call = pmac_do_feature_call, .progress = pmac_progress, - .check_legacy_ioport = pmac_check_legacy_ioport + .check_legacy_ioport = pmac_check_legacy_ioport, + .idle_loop = native_idle, }; diff --git a/arch/ppc64/kernel/pmac_time.c b/arch/ppc64/kernel/pmac_time.c index f24827581dd7..3059edb09cc8 100644 --- a/arch/ppc64/kernel/pmac_time.c +++ b/arch/ppc64/kernel/pmac_time.c @@ -40,11 +40,6 @@ #define DBG(x...) #endif -extern void setup_default_decr(void); - -extern unsigned long ppc_tb_freq; -extern unsigned long ppc_proc_freq; - /* Apparently the RTC stores seconds since 1 Jan 1904 */ #define RTC_OFFSET 2082844800 @@ -161,8 +156,7 @@ void __init pmac_get_boot_time(struct rtc_time *tm) /* * Query the OF and get the decr frequency. - * This was taken from the pmac time_init() when merging the prep/pmac - * time functions. + * FIXME: merge this with generic_calibrate_decr */ void __init pmac_calibrate_decr(void) { diff --git a/arch/ppc64/kernel/ppc_ksyms.c b/arch/ppc64/kernel/ppc_ksyms.c index b230a63fe4c8..705742f4eec6 100644 --- a/arch/ppc64/kernel/ppc_ksyms.c +++ b/arch/ppc64/kernel/ppc_ksyms.c @@ -75,6 +75,7 @@ EXPORT_SYMBOL(giveup_fpu); EXPORT_SYMBOL(giveup_altivec); #endif EXPORT_SYMBOL(__flush_icache_range); +EXPORT_SYMBOL(flush_dcache_range); #ifdef CONFIG_SMP #ifdef CONFIG_PPC_ISERIES diff --git a/arch/ppc64/kernel/proc_ppc64.c b/arch/ppc64/kernel/proc_ppc64.c index 0914b0669b05..a87c66a9652a 100644 --- a/arch/ppc64/kernel/proc_ppc64.c +++ b/arch/ppc64/kernel/proc_ppc64.c @@ -53,7 +53,7 @@ static int __init proc_ppc64_create(void) if (!root) return 1; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_BPA))) return 0; if (!proc_mkdir("rtas", root)) diff --git a/arch/ppc64/kernel/process.c b/arch/ppc64/kernel/process.c index aba89554d89d..f7cae05e40fb 100644 --- a/arch/ppc64/kernel/process.c +++ b/arch/ppc64/kernel/process.c @@ -36,6 +36,7 @@ #include <linux/kallsyms.h> #include <linux/interrupt.h> #include <linux/utsname.h> +#include <linux/kprobes.h> #include <asm/pgtable.h> #include <asm/uaccess.h> @@ -307,6 +308,8 @@ void show_regs(struct pt_regs * regs) void exit_thread(void) { + kprobe_flush_task(current); + #ifndef CONFIG_SMP if (last_task_used_math == current) last_task_used_math = NULL; @@ -321,6 +324,7 @@ void flush_thread(void) { struct thread_info *t = current_thread_info(); + kprobe_flush_task(current); if (t->flags & _TIF_ABI_PENDING) t->flags ^= (_TIF_ABI_PENDING | _TIF_32BIT); diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c index 47727a6f7346..5aca01ddd81f 100644 --- a/arch/ppc64/kernel/prom.c +++ b/arch/ppc64/kernel/prom.c @@ -916,6 +916,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node, } } +#ifdef CONFIG_ALTIVEC /* Check if we have a VMX and eventually update CPU features */ prop = (u32 *)get_flat_dt_prop(node, "ibm,vmx", NULL); if (prop && (*prop) > 0) { @@ -929,6 +930,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node, cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; } +#endif /* CONFIG_ALTIVEC */ /* * Check for an SMT capable CPU and set the CPU feature. We do diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index b7683abfbe6a..e248a7950aeb 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1915,9 +1915,9 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long prom_send_capabilities(); /* - * On pSeries, copy the CPU hold code + * On pSeries and BPA, copy the CPU hold code */ - if (RELOC(of_platform) & PLATFORM_PSERIES) + if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_BPA)) copy_and_flush(0, KERNELBASE - offset, 0x100, 0); /* diff --git a/arch/ppc64/kernel/ptrace.c b/arch/ppc64/kernel/ptrace.c index 9f8c6087ae56..2993f108d96d 100644 --- a/arch/ppc64/kernel/ptrace.c +++ b/arch/ppc64/kernel/ptrace.c @@ -305,6 +305,8 @@ static void do_syscall_trace(void) void do_syscall_trace_enter(struct pt_regs *regs) { + secure_computing(regs->gpr[0]); + if (test_thread_flag(TIF_SYSCALL_TRACE) && (current->ptrace & PT_PTRACED)) do_syscall_trace(); @@ -320,8 +322,6 @@ void do_syscall_trace_enter(struct pt_regs *regs) void do_syscall_trace_leave(struct pt_regs *regs) { - secure_computing(regs->gpr[0]); - if (unlikely(current->audit_context)) audit_syscall_exit(current, (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, diff --git a/arch/ppc64/kernel/rtas-proc.c b/arch/ppc64/kernel/rtas-proc.c index 28b1f1521f21..1f3ff860fdf0 100644 --- a/arch/ppc64/kernel/rtas-proc.c +++ b/arch/ppc64/kernel/rtas-proc.c @@ -371,11 +371,11 @@ static ssize_t ppc_rtas_progress_write(struct file *file, /* Lets see if the user passed hexdigits */ hex = simple_strtoul(progress_led, NULL, 10); - ppc_md.progress ((char *)progress_led, hex); + rtas_progress ((char *)progress_led, hex); return count; /* clear the line */ - /* ppc_md.progress(" ", 0xffff);*/ + /* rtas_progress(" ", 0xffff);*/ } /* ****************************************************************** */ static int ppc_rtas_progress_show(struct seq_file *m, void *v) diff --git a/arch/ppc64/kernel/rtas.c b/arch/ppc64/kernel/rtas.c index 5575603def27..5e8eb33b8e54 100644 --- a/arch/ppc64/kernel/rtas.c +++ b/arch/ppc64/kernel/rtas.c @@ -91,6 +91,123 @@ call_rtas_display_status_delay(unsigned char c) } } +void +rtas_progress(char *s, unsigned short hex) +{ + struct device_node *root; + int width, *p; + char *os; + static int display_character, set_indicator; + static int display_width, display_lines, *row_width, form_feed; + static DEFINE_SPINLOCK(progress_lock); + static int current_line; + static int pending_newline = 0; /* did last write end with unprinted newline? */ + + if (!rtas.base) + return; + + if (display_width == 0) { + display_width = 0x10; + if ((root = find_path_device("/rtas"))) { + if ((p = (unsigned int *)get_property(root, + "ibm,display-line-length", NULL))) + display_width = *p; + if ((p = (unsigned int *)get_property(root, + "ibm,form-feed", NULL))) + form_feed = *p; + if ((p = (unsigned int *)get_property(root, + "ibm,display-number-of-lines", NULL))) + display_lines = *p; + row_width = (unsigned int *)get_property(root, + "ibm,display-truncation-length", NULL); + } + display_character = rtas_token("display-character"); + set_indicator = rtas_token("set-indicator"); + } + + if (display_character == RTAS_UNKNOWN_SERVICE) { + /* use hex display if available */ + if (set_indicator != RTAS_UNKNOWN_SERVICE) + rtas_call(set_indicator, 3, 1, NULL, 6, 0, hex); + return; + } + + spin_lock(&progress_lock); + + /* + * Last write ended with newline, but we didn't print it since + * it would just clear the bottom line of output. Print it now + * instead. + * + * If no newline is pending and form feed is supported, clear the + * display with a form feed; otherwise, print a CR to start output + * at the beginning of the line. + */ + if (pending_newline) { + rtas_call(display_character, 1, 1, NULL, '\r'); + rtas_call(display_character, 1, 1, NULL, '\n'); + pending_newline = 0; + } else { + current_line = 0; + if (form_feed) + rtas_call(display_character, 1, 1, NULL, + (char)form_feed); + else + rtas_call(display_character, 1, 1, NULL, '\r'); + } + + if (row_width) + width = row_width[current_line]; + else + width = display_width; + os = s; + while (*os) { + if (*os == '\n' || *os == '\r') { + /* If newline is the last character, save it + * until next call to avoid bumping up the + * display output. + */ + if (*os == '\n' && !os[1]) { + pending_newline = 1; + current_line++; + if (current_line > display_lines-1) + current_line = display_lines-1; + spin_unlock(&progress_lock); + return; + } + + /* RTAS wants CR-LF, not just LF */ + + if (*os == '\n') { + rtas_call(display_character, 1, 1, NULL, '\r'); + rtas_call(display_character, 1, 1, NULL, '\n'); + } else { + /* CR might be used to re-draw a line, so we'll + * leave it alone and not add LF. + */ + rtas_call(display_character, 1, 1, NULL, *os); + } + + if (row_width) + width = row_width[current_line]; + else + width = display_width; + } else { + width--; + rtas_call(display_character, 1, 1, NULL, *os); + } + + os++; + + /* if we overwrite the screen length */ + if (width <= 0) + while ((*os != 0) && (*os != '\n') && (*os != '\r')) + os++; + } + + spin_unlock(&progress_lock); +} + int rtas_token(const char *service) { @@ -425,8 +542,8 @@ rtas_flash_firmware(void) printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); printk(KERN_ALERT "FLASH: performing flash and reboot\n"); - ppc_md.progress("Flashing \n", 0x0); - ppc_md.progress("Please Wait... ", 0x0); + rtas_progress("Flashing \n", 0x0); + rtas_progress("Please Wait... ", 0x0); printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); status = rtas_call(update_token, 1, 1, NULL, rtas_block_list); switch (status) { /* should only get "bad" status */ diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/ppc64/kernel/rtas_pci.c new file mode 100644 index 000000000000..1048817befb8 --- /dev/null +++ b/arch/ppc64/kernel/rtas_pci.c @@ -0,0 +1,495 @@ +/* + * arch/ppc64/kernel/rtas_pci.c + * + * Copyright (C) 2001 Dave Engebretsen, IBM Corporation + * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM + * + * RTAS specific routines for PCI. + * + * Based on code from pci.c, chrp_pci.c and pSeries_pci.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/threads.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> + +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/iommu.h> +#include <asm/rtas.h> + +#include "mpic.h" +#include "pci.h" + +/* RTAS tokens */ +static int read_pci_config; +static int write_pci_config; +static int ibm_read_pci_config; +static int ibm_write_pci_config; + +static int config_access_valid(struct device_node *dn, int where) +{ + if (where < 256) + return 1; + if (where < 4096 && dn->pci_ext_config_space) + return 1; + + return 0; +} + +static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val) +{ + int returnval = -1; + unsigned long buid, addr; + int ret; + + if (!dn) + return PCIBIOS_DEVICE_NOT_FOUND; + if (!config_access_valid(dn, where)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + addr = ((where & 0xf00) << 20) | (dn->busno << 16) | + (dn->devfn << 8) | (where & 0xff); + buid = dn->phb->buid; + if (buid) { + ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, + addr, buid >> 32, buid & 0xffffffff, size); + } else { + ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size); + } + *val = returnval; + + if (ret) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (returnval == EEH_IO_ERROR_VALUE(size) + && eeh_dn_check_failure (dn, NULL)) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + +static int rtas_pci_read_config(struct pci_bus *bus, + unsigned int devfn, + int where, int size, u32 *val) +{ + struct device_node *busdn, *dn; + + if (bus->self) + busdn = pci_device_to_OF_node(bus->self); + else + busdn = bus->sysdata; /* must be a phb */ + + /* Search only direct children of the bus */ + for (dn = busdn->child; dn; dn = dn->sibling) + if (dn->devfn == devfn) + return rtas_read_config(dn, where, size, val); + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static int rtas_write_config(struct device_node *dn, int where, int size, u32 val) +{ + unsigned long buid, addr; + int ret; + + if (!dn) + return PCIBIOS_DEVICE_NOT_FOUND; + if (!config_access_valid(dn, where)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + addr = ((where & 0xf00) << 20) | (dn->busno << 16) | + (dn->devfn << 8) | (where & 0xff); + buid = dn->phb->buid; + if (buid) { + ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val); + } else { + ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val); + } + + if (ret) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + +static int rtas_pci_write_config(struct pci_bus *bus, + unsigned int devfn, + int where, int size, u32 val) +{ + struct device_node *busdn, *dn; + + if (bus->self) + busdn = pci_device_to_OF_node(bus->self); + else + busdn = bus->sysdata; /* must be a phb */ + + /* Search only direct children of the bus */ + for (dn = busdn->child; dn; dn = dn->sibling) + if (dn->devfn == devfn) + return rtas_write_config(dn, where, size, val); + return PCIBIOS_DEVICE_NOT_FOUND; +} + +struct pci_ops rtas_pci_ops = { + rtas_pci_read_config, + rtas_pci_write_config +}; + +int is_python(struct device_node *dev) +{ + char *model = (char *)get_property(dev, "model", NULL); + + if (model && strstr(model, "Python")) + return 1; + + return 0; +} + +static int get_phb_reg_prop(struct device_node *dev, + unsigned int addr_size_words, + struct reg_property64 *reg) +{ + unsigned int *ui_ptr = NULL, len; + + /* Found a PHB, now figure out where his registers are mapped. */ + ui_ptr = (unsigned int *)get_property(dev, "reg", &len); + if (ui_ptr == NULL) + return 1; + + if (addr_size_words == 1) { + reg->address = ((struct reg_property32 *)ui_ptr)->address; + reg->size = ((struct reg_property32 *)ui_ptr)->size; + } else { + *reg = *((struct reg_property64 *)ui_ptr); + } + + return 0; +} + +static void python_countermeasures(struct device_node *dev, + unsigned int addr_size_words) +{ + struct reg_property64 reg_struct; + void __iomem *chip_regs; + volatile u32 val; + + if (get_phb_reg_prop(dev, addr_size_words, ®_struct)) + return; + + /* Python's register file is 1 MB in size. */ + chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000); + + /* + * Firmware doesn't always clear this bit which is critical + * for good performance - Anton + */ + +#define PRG_CL_RESET_VALID 0x00010000 + + val = in_be32(chip_regs + 0xf6030); + if (val & PRG_CL_RESET_VALID) { + printk(KERN_INFO "Python workaround: "); + val &= ~PRG_CL_RESET_VALID; + out_be32(chip_regs + 0xf6030, val); + /* + * We must read it back for changes to + * take effect + */ + val = in_be32(chip_regs + 0xf6030); + printk("reg0: %x\n", val); + } + + iounmap(chip_regs); +} + +void __init init_pci_config_tokens (void) +{ + read_pci_config = rtas_token("read-pci-config"); + write_pci_config = rtas_token("write-pci-config"); + ibm_read_pci_config = rtas_token("ibm,read-pci-config"); + ibm_write_pci_config = rtas_token("ibm,write-pci-config"); +} + +unsigned long __devinit get_phb_buid (struct device_node *phb) +{ + int addr_cells; + unsigned int *buid_vals; + unsigned int len; + unsigned long buid; + + if (ibm_read_pci_config == -1) return 0; + + /* PHB's will always be children of the root node, + * or so it is promised by the current firmware. */ + if (phb->parent == NULL) + return 0; + if (phb->parent->parent) + return 0; + + buid_vals = (unsigned int *) get_property(phb, "reg", &len); + if (buid_vals == NULL) + return 0; + + addr_cells = prom_n_addr_cells(phb); + if (addr_cells == 1) { + buid = (unsigned long) buid_vals[0]; + } else { + buid = (((unsigned long)buid_vals[0]) << 32UL) | + (((unsigned long)buid_vals[1]) & 0xffffffff); + } + return buid; +} + +static int phb_set_bus_ranges(struct device_node *dev, + struct pci_controller *phb) +{ + int *bus_range; + unsigned int len; + + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + return 1; + } + + phb->first_busno = bus_range[0]; + phb->last_busno = bus_range[1]; + + return 0; +} + +static int __devinit setup_phb(struct device_node *dev, + struct pci_controller *phb, + unsigned int addr_size_words) +{ + pci_setup_pci_controller(phb); + + if (is_python(dev)) + python_countermeasures(dev, addr_size_words); + + if (phb_set_bus_ranges(dev, phb)) + return 1; + + phb->arch_data = dev; + phb->ops = &rtas_pci_ops; + phb->buid = get_phb_buid(dev); + + return 0; +} + +static void __devinit add_linux_pci_domain(struct device_node *dev, + struct pci_controller *phb, + struct property *of_prop) +{ + memset(of_prop, 0, sizeof(struct property)); + of_prop->name = "linux,pci-domain"; + of_prop->length = sizeof(phb->global_number); + of_prop->value = (unsigned char *)&of_prop[1]; + memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number)); + prom_add_property(dev, of_prop); +} + +static struct pci_controller * __init alloc_phb(struct device_node *dev, + unsigned int addr_size_words) +{ + struct pci_controller *phb; + struct property *of_prop; + + phb = alloc_bootmem(sizeof(struct pci_controller)); + if (phb == NULL) + return NULL; + + of_prop = alloc_bootmem(sizeof(struct property) + + sizeof(phb->global_number)); + if (!of_prop) + return NULL; + + if (setup_phb(dev, phb, addr_size_words)) + return NULL; + + add_linux_pci_domain(dev, phb, of_prop); + + return phb; +} + +static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words) +{ + struct pci_controller *phb; + + phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), + GFP_KERNEL); + if (phb == NULL) + return NULL; + + if (setup_phb(dev, phb, addr_size_words)) + return NULL; + + phb->is_dynamic = 1; + + /* TODO: linux,pci-domain? */ + + return phb; +} + +unsigned long __init find_and_init_phbs(void) +{ + struct device_node *node; + struct pci_controller *phb; + unsigned int root_size_cells = 0; + unsigned int index; + unsigned int *opprop = NULL; + struct device_node *root = of_find_node_by_path("/"); + + if (ppc64_interrupt_controller == IC_OPEN_PIC) { + opprop = (unsigned int *)get_property(root, + "platform-open-pic", NULL); + } + + root_size_cells = prom_n_size_cells(root); + + index = 0; + + for (node = of_get_next_child(root, NULL); + node != NULL; + node = of_get_next_child(root, node)) { + if (node->type == NULL || strcmp(node->type, "pci") != 0) + continue; + + phb = alloc_phb(node, root_size_cells); + if (!phb) + continue; + + pci_process_bridge_OF_ranges(phb, node); + pci_setup_phb_io(phb, index == 0); +#ifdef CONFIG_PPC_PSERIES + if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) { + int addr = root_size_cells * (index + 2) - 1; + mpic_assign_isu(pSeries_mpic, index, opprop[addr]); + } +#endif + index++; + } + + of_node_put(root); + pci_devs_phb_init(); + + /* + * pci_probe_only and pci_assign_all_buses can be set via properties + * in chosen. + */ + if (of_chosen) { + int *prop; + + prop = (int *)get_property(of_chosen, "linux,pci-probe-only", + NULL); + if (prop) + pci_probe_only = *prop; + + prop = (int *)get_property(of_chosen, + "linux,pci-assign-all-buses", NULL); + if (prop) + pci_assign_all_buses = *prop; + } + + return 0; +} + +struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) +{ + struct device_node *root = of_find_node_by_path("/"); + unsigned int root_size_cells = 0; + struct pci_controller *phb; + struct pci_bus *bus; + int primary; + + root_size_cells = prom_n_size_cells(root); + + primary = list_empty(&hose_list); + phb = alloc_phb_dynamic(dn, root_size_cells); + if (!phb) + return NULL; + + pci_process_bridge_OF_ranges(phb, dn); + + pci_setup_phb_io_dynamic(phb, primary); + of_node_put(root); + + pci_devs_phb_init_dynamic(phb); + phb->last_busno = 0xff; + bus = pci_scan_bus(phb->first_busno, phb->ops, phb->arch_data); + phb->bus = bus; + phb->last_busno = bus->subordinate; + + return phb; +} +EXPORT_SYMBOL(init_phb_dynamic); + +/* RPA-specific bits for removing PHBs */ +int pcibios_remove_root_bus(struct pci_controller *phb) +{ + struct pci_bus *b = phb->bus; + struct resource *res; + int rc, i; + + res = b->resource[0]; + if (!res->flags) { + printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__, + b->name); + return 1; + } + + rc = unmap_bus_range(b); + if (rc) { + printk(KERN_ERR "%s: failed to unmap IO on bus %s\n", + __FUNCTION__, b->name); + return 1; + } + + if (release_resource(res)) { + printk(KERN_ERR "%s: failed to release IO on bus %s\n", + __FUNCTION__, b->name); + return 1; + } + + for (i = 1; i < 3; ++i) { + res = b->resource[i]; + if (!res->flags && i == 0) { + printk(KERN_ERR "%s: no MEM resource for PHB %s\n", + __FUNCTION__, b->name); + return 1; + } + if (res->flags && release_resource(res)) { + printk(KERN_ERR + "%s: failed to release IO %d on bus %s\n", + __FUNCTION__, i, b->name); + return 1; + } + } + + list_del(&phb->list_node); + if (phb->is_dynamic) + kfree(phb); + + return 0; +} +EXPORT_SYMBOL(pcibios_remove_root_bus); diff --git a/arch/ppc64/kernel/rtc.c b/arch/ppc64/kernel/rtc.c index de02aedbe080..d729fefa0df5 100644 --- a/arch/ppc64/kernel/rtc.c +++ b/arch/ppc64/kernel/rtc.c @@ -301,7 +301,7 @@ void iSeries_get_boot_time(struct rtc_time *tm) #ifdef CONFIG_PPC_RTAS #define MAX_RTC_WAIT 5000 /* 5 sec */ #define RTAS_CLOCK_BUSY (-2) -void pSeries_get_boot_time(struct rtc_time *rtc_tm) +void rtas_get_boot_time(struct rtc_time *rtc_tm) { int ret[8]; int error, wait_time; @@ -336,7 +336,7 @@ void pSeries_get_boot_time(struct rtc_time *rtc_tm) * and if a delay is needed to read the clock. In this case we just * silently return without updating rtc_tm. */ -void pSeries_get_rtc_time(struct rtc_time *rtc_tm) +void rtas_get_rtc_time(struct rtc_time *rtc_tm) { int ret[8]; int error, wait_time; @@ -371,7 +371,7 @@ void pSeries_get_rtc_time(struct rtc_time *rtc_tm) rtc_tm->tm_year = ret[0] - 1900; } -int pSeries_set_rtc_time(struct rtc_time *tm) +int rtas_set_rtc_time(struct rtc_time *tm) { int error, wait_time; unsigned long max_wait_tb; diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c index 8e439a817642..687e85595208 100644 --- a/arch/ppc64/kernel/setup.c +++ b/arch/ppc64/kernel/setup.c @@ -96,7 +96,6 @@ extern void udbg_init_maple_realmode(void); extern unsigned long klimit; extern void mm_init_ppc64(void); -extern int idle_setup(void); extern void stab_initialize(unsigned long stab); extern void htab_initialize(void); extern void early_init_devtree(void *flat_dt); @@ -344,6 +343,7 @@ static void __init setup_cpu_maps(void) extern struct machdep_calls pSeries_md; extern struct machdep_calls pmac_md; extern struct machdep_calls maple_md; +extern struct machdep_calls bpa_md; /* Ultimately, stuff them in an elf section like initcalls... */ static struct machdep_calls __initdata *machines[] = { @@ -356,6 +356,9 @@ static struct machdep_calls __initdata *machines[] = { #ifdef CONFIG_PPC_MAPLE &maple_md, #endif /* CONFIG_PPC_MAPLE */ +#ifdef CONFIG_PPC_BPA + &bpa_md, +#endif NULL }; @@ -673,37 +676,49 @@ void __init setup_system(void) DBG(" <- setup_system()\n"); } - -void machine_restart(char *cmd) +/* also used by kexec */ +void machine_shutdown(void) { if (ppc_md.nvram_sync) ppc_md.nvram_sync(); +} + +void machine_restart(char *cmd) +{ + machine_shutdown(); ppc_md.restart(cmd); +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) ; } -EXPORT_SYMBOL(machine_restart); - void machine_power_off(void) { - if (ppc_md.nvram_sync) - ppc_md.nvram_sync(); + machine_shutdown(); ppc_md.power_off(); +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) ; } -EXPORT_SYMBOL(machine_power_off); - void machine_halt(void) { - if (ppc_md.nvram_sync) - ppc_md.nvram_sync(); + machine_shutdown(); ppc_md.halt(); +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) ; } -EXPORT_SYMBOL(machine_halt); - -unsigned long ppc_proc_freq; -unsigned long ppc_tb_freq; - static int ppc64_panic_event(struct notifier_block *this, unsigned long event, void *ptr) { @@ -1053,16 +1068,22 @@ void __init setup_arch(char **cmdline_p) irqstack_early_init(); emergency_stack_init(); + stabs_alloc(); + /* set up the bootmem stuff with available memory */ do_init_bootmem(); + sparse_init(); /* initialize the syscall map in systemcfg */ setup_syscall_map(); ppc_md.setup_arch(); - /* Select the correct idle loop for the platform. */ - idle_setup(); + /* Use the default idle loop if the platform hasn't provided one. */ + if (NULL == ppc_md.idle_loop) { + ppc_md.idle_loop = default_idle; + printk(KERN_INFO "Using default idle loop\n"); + } paging_init(); ppc64_boot_msg(0x15, "Setup Done"); @@ -1079,11 +1100,11 @@ void __init setup_arch(char **cmdline_p) static void ppc64_do_msg(unsigned int src, const char *msg) { if (ppc_md.progress) { - char buf[32]; + char buf[128]; - sprintf(buf, "%08x \n", src); + sprintf(buf, "%08X\n", src); ppc_md.progress(buf, 0); - sprintf(buf, "%-16s", msg); + snprintf(buf, 128, "%s", msg); ppc_md.progress(buf, 0); } } @@ -1117,7 +1138,7 @@ void ppc64_dump_msg(unsigned int src, const char *msg) } /* This should only be called on processor 0 during calibrate decr */ -void setup_default_decr(void) +void __init setup_default_decr(void) { struct paca_struct *lpaca = get_paca(); diff --git a/arch/ppc64/kernel/smp.c b/arch/ppc64/kernel/smp.c index 9ef5d36d6b25..793b562da653 100644 --- a/arch/ppc64/kernel/smp.c +++ b/arch/ppc64/kernel/smp.c @@ -65,13 +65,11 @@ struct smp_ops_t *smp_ops; static volatile unsigned int cpu_callin_map[NR_CPUS]; -extern unsigned char stab_array[]; - void smp_call_function_interrupt(void); int smt_enabled_at_boot = 1; -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_MPIC void smp_mpic_message_pass(int target, int msg) { /* make sure we're sending something that translates to an IPI */ @@ -128,7 +126,7 @@ void __devinit smp_generic_kick_cpu(int nr) smp_mb(); } -#endif /* CONFIG_PPC_MULTIPLATFORM */ +#endif /* CONFIG_MPIC */ static void __init smp_space_timers(unsigned int max_cpus) { @@ -492,19 +490,6 @@ int __devinit __cpu_up(unsigned int cpu) paca[cpu].default_decr = tb_ticks_per_jiffy; - if (!cpu_has_feature(CPU_FTR_SLB)) { - void *tmp; - - /* maximum of 48 CPUs on machines with a segment table */ - if (cpu >= 48) - BUG(); - - tmp = &stab_array[PAGE_SIZE * cpu]; - memset(tmp, 0, PAGE_SIZE); - paca[cpu].stab_addr = (unsigned long)tmp; - paca[cpu].stab_real = virt_to_abs(tmp); - } - /* Make sure callin-map entry is 0 (can be leftover a CPU * hotplug */ diff --git a/arch/ppc64/kernel/spider-pic.c b/arch/ppc64/kernel/spider-pic.c new file mode 100644 index 000000000000..d5c9a02fb119 --- /dev/null +++ b/arch/ppc64/kernel/spider-pic.c @@ -0,0 +1,191 @@ +/* + * External Interrupt Controller on Spider South Bridge + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann <arndb@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/io.h> + +#include "bpa_iic.h" + +/* register layout taken from Spider spec, table 7.4-4 */ +enum { + TIR_DEN = 0x004, /* Detection Enable Register */ + TIR_MSK = 0x084, /* Mask Level Register */ + TIR_EDC = 0x0c0, /* Edge Detection Clear Register */ + TIR_PNDA = 0x100, /* Pending Register A */ + TIR_PNDB = 0x104, /* Pending Register B */ + TIR_CS = 0x144, /* Current Status Register */ + TIR_LCSA = 0x150, /* Level Current Status Register A */ + TIR_LCSB = 0x154, /* Level Current Status Register B */ + TIR_LCSC = 0x158, /* Level Current Status Register C */ + TIR_LCSD = 0x15c, /* Level Current Status Register D */ + TIR_CFGA = 0x200, /* Setting Register A0 */ + TIR_CFGB = 0x204, /* Setting Register B0 */ + /* 0x208 ... 0x3ff Setting Register An/Bn */ + TIR_PPNDA = 0x400, /* Packet Pending Register A */ + TIR_PPNDB = 0x404, /* Packet Pending Register B */ + TIR_PIERA = 0x408, /* Packet Output Error Register A */ + TIR_PIERB = 0x40c, /* Packet Output Error Register B */ + TIR_PIEN = 0x444, /* Packet Output Enable Register */ + TIR_PIPND = 0x454, /* Packet Output Pending Register */ + TIRDID = 0x484, /* Spider Device ID Register */ + REISTIM = 0x500, /* Reissue Command Timeout Time Setting */ + REISTIMEN = 0x504, /* Reissue Command Timeout Setting */ + REISWAITEN = 0x508, /* Reissue Wait Control*/ +}; + +static void __iomem *spider_pics[4]; + +static void __iomem *spider_get_pic(int irq) +{ + int node = irq / IIC_NODE_STRIDE; + irq %= IIC_NODE_STRIDE; + + if (irq >= IIC_EXT_OFFSET && + irq < IIC_EXT_OFFSET + IIC_NUM_EXT && + spider_pics) + return spider_pics[node]; + return NULL; +} + +static int spider_get_nr(unsigned int irq) +{ + return (irq % IIC_NODE_STRIDE) - IIC_EXT_OFFSET; +} + +static void __iomem *spider_get_irq_config(int irq) +{ + void __iomem *pic; + pic = spider_get_pic(irq); + return pic + TIR_CFGA + 8 * spider_get_nr(irq); +} + +static void spider_enable_irq(unsigned int irq) +{ + void __iomem *cfg = spider_get_irq_config(irq); + irq = spider_get_nr(irq); + + out_be32(cfg, in_be32(cfg) | 0x3107000eu); + out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq); +} + +static void spider_disable_irq(unsigned int irq) +{ + void __iomem *cfg = spider_get_irq_config(irq); + irq = spider_get_nr(irq); + + out_be32(cfg, in_be32(cfg) & ~0x30000000u); +} + +static unsigned int spider_startup_irq(unsigned int irq) +{ + spider_enable_irq(irq); + return 0; +} + +static void spider_shutdown_irq(unsigned int irq) +{ + spider_disable_irq(irq); +} + +static void spider_end_irq(unsigned int irq) +{ + spider_enable_irq(irq); +} + +static void spider_ack_irq(unsigned int irq) +{ + spider_disable_irq(irq); + iic_local_enable(); +} + +static struct hw_interrupt_type spider_pic = { + .typename = " SPIDER ", + .startup = spider_startup_irq, + .shutdown = spider_shutdown_irq, + .enable = spider_enable_irq, + .disable = spider_disable_irq, + .ack = spider_ack_irq, + .end = spider_end_irq, +}; + + +int spider_get_irq(unsigned long int_pending) +{ + void __iomem *regs = spider_get_pic(int_pending); + unsigned long cs; + int irq; + + cs = in_be32(regs + TIR_CS); + + irq = cs >> 24; + if (irq != 63) + return irq; + + return -1; +} + +void spider_init_IRQ(void) +{ + int node; + struct device_node *dn; + unsigned int *property; + long spiderpic; + int n; + +/* FIXME: detect multiple PICs as soon as the device tree has them */ + for (node = 0; node < 1; node++) { + dn = of_find_node_by_path("/"); + n = prom_n_addr_cells(dn); + property = (unsigned int *) get_property(dn, + "platform-spider-pic", NULL); + + if (!property) + continue; + for (spiderpic = 0; n > 0; --n) + spiderpic = (spiderpic << 32) + *property++; + printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic); + spider_pics[node] = __ioremap(spiderpic, 0x800, _PAGE_NO_CACHE); + for (n = 0; n < IIC_NUM_EXT; n++) { + int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE; + get_irq_desc(irq)->handler = &spider_pic; + + /* do not mask any interrupts because of level */ + out_be32(spider_pics[node] + TIR_MSK, 0x0); + + /* disable edge detection clear */ + /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */ + + /* enable interrupt packets to be output */ + out_be32(spider_pics[node] + TIR_PIEN, + in_be32(spider_pics[node] + TIR_PIEN) | 0x1); + + /* Enable the interrupt detection enable bit. Do this last! */ + out_be32(spider_pics[node] + TIR_DEN, + in_be32(spider_pics[node] +TIR_DEN) | 0x1); + + } + } +} diff --git a/arch/ppc64/kernel/sys_ppc32.c b/arch/ppc64/kernel/sys_ppc32.c index 118436e8085a..206619080e66 100644 --- a/arch/ppc64/kernel/sys_ppc32.c +++ b/arch/ppc64/kernel/sys_ppc32.c @@ -30,47 +30,26 @@ #include <linux/sem.h> #include <linux/msg.h> #include <linux/shm.h> -#include <linux/slab.h> -#include <linux/uio.h> -#include <linux/aio.h> -#include <linux/nfs_fs.h> -#include <linux/module.h> -#include <linux/sunrpc/svc.h> -#include <linux/nfsd/nfsd.h> -#include <linux/nfsd/cache.h> -#include <linux/nfsd/xdr.h> -#include <linux/nfsd/syscall.h> #include <linux/poll.h> #include <linux/personality.h> #include <linux/stat.h> -#include <linux/filter.h> -#include <linux/highmem.h> -#include <linux/highuid.h> #include <linux/mman.h> -#include <linux/ipv6.h> #include <linux/in.h> -#include <linux/icmpv6.h> #include <linux/syscalls.h> #include <linux/unistd.h> #include <linux/sysctl.h> #include <linux/binfmts.h> -#include <linux/dnotify.h> #include <linux/security.h> #include <linux/compat.h> #include <linux/ptrace.h> -#include <linux/aio_abi.h> #include <linux/elf.h> -#include <net/scm.h> -#include <net/sock.h> - #include <asm/ptrace.h> #include <asm/types.h> #include <asm/ipc.h> #include <asm/uaccess.h> #include <asm/unistd.h> #include <asm/semaphore.h> -#include <asm/ppcdebug.h> #include <asm/time.h> #include <asm/mmu_context.h> #include <asm/systemcfg.h> @@ -350,8 +329,6 @@ asmlinkage long sys32_adjtimex(struct timex32 __user *utp) return ret; } - -/* These are here just in case some old sparc32 binary calls it. */ asmlinkage long sys32_pause(void) { current->state = TASK_INTERRUPTIBLE; @@ -360,8 +337,6 @@ asmlinkage long sys32_pause(void) return -ERESTARTNOHAND; } - - static inline long get_ts32(struct timespec *o, struct compat_timeval __user *i) { long usec; @@ -847,16 +822,6 @@ asmlinkage long sys32_getpgid(u32 pid) } -/* Note: it is necessary to treat which and who as unsigned ints, - * with the corresponding cast to a signed int to insure that the - * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode) - * and the register representation of a signed int (msr in 64-bit mode) is performed. - */ -asmlinkage long sys32_getpriority(u32 which, u32 who) -{ - return sys_getpriority((int)which, (int)who); -} - /* Note: it is necessary to treat pid as an unsigned int, * with the corresponding cast to a signed int to insure that the @@ -1048,6 +1013,11 @@ asmlinkage long sys32_setpgid(u32 pid, u32 pgid) return sys_setpgid((int)pid, (int)pgid); } +long sys32_getpriority(u32 which, u32 who) +{ + /* sign extend which and who */ + return sys_getpriority((int)which, (int)who); +} long sys32_setpriority(u32 which, u32 who, u32 niceval) { @@ -1055,6 +1025,18 @@ long sys32_setpriority(u32 which, u32 who, u32 niceval) return sys_setpriority((int)which, (int)who, (int)niceval); } +long sys32_ioprio_get(u32 which, u32 who) +{ + /* sign extend which and who */ + return sys_ioprio_get((int)which, (int)who); +} + +long sys32_ioprio_set(u32 which, u32 who, u32 ioprio) +{ + /* sign extend which, who and ioprio */ + return sys_ioprio_set((int)which, (int)who, (int)ioprio); +} + /* Note: it is necessary to treat newmask as an unsigned int, * with the corresponding cast to a signed int to insure that the * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode) @@ -1273,8 +1255,6 @@ long ppc32_fadvise64_64(int fd, int advice, u32 offset_high, u32 offset_low, (u64)len_high << 32 | len_low, advice); } -extern asmlinkage long sys_timer_create(clockid_t, sigevent_t __user *, timer_t __user *); - long ppc32_timer_create(clockid_t clock, struct compat_sigevent __user *ev32, timer_t __user *timer_id) diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c index c8fa6569b2fd..02b8ac4e0168 100644 --- a/arch/ppc64/kernel/sysfs.c +++ b/arch/ppc64/kernel/sysfs.c @@ -112,7 +112,6 @@ void ppc64_enable_pmcs(void) unsigned long hid0; #ifdef CONFIG_PPC_PSERIES unsigned long set, reset; - int ret; #endif /* CONFIG_PPC_PSERIES */ /* Only need to enable them once */ @@ -145,11 +144,7 @@ void ppc64_enable_pmcs(void) case PLATFORM_PSERIES_LPAR: set = 1UL << 63; reset = 0; - ret = plpar_hcall_norets(H_PERFMON, set, reset); - if (ret) - printk(KERN_ERR "H_PERFMON call on cpu %u " - "returned %d\n", - smp_processor_id(), ret); + plpar_hcall_norets(H_PERFMON, set, reset); break; #endif /* CONFIG_PPC_PSERIES */ @@ -161,13 +156,6 @@ void ppc64_enable_pmcs(void) /* instruct hypervisor to maintain PMCs */ if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) get_paca()->lppaca.pmcregs_in_use = 1; - - /* - * On SMT machines we have to set the run latch in the ctrl register - * in order to make PMC6 spin. - */ - if (cpu_has_feature(CPU_FTR_SMT)) - ppc64_runlatch_on(); #endif /* CONFIG_PPC_PSERIES */ } @@ -400,7 +388,12 @@ static int __init topology_init(void) struct cpu *c = &per_cpu(cpu_devices, cpu); #ifdef CONFIG_NUMA - parent = &node_devices[cpu_to_node(cpu)]; + /* The node to which a cpu belongs can't be known + * until the cpu is made present. + */ + parent = NULL; + if (cpu_present(cpu)) + parent = &node_devices[cpu_to_node(cpu)]; #endif /* * For now, we just see if the system supports making diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c index 33364a7d2cd2..909462e1adea 100644 --- a/arch/ppc64/kernel/time.c +++ b/arch/ppc64/kernel/time.c @@ -91,6 +91,7 @@ unsigned long tb_to_xs; unsigned tb_to_us; unsigned long processor_freq; DEFINE_SPINLOCK(rtc_lock); +EXPORT_SYMBOL_GPL(rtc_lock); unsigned long tb_to_ns_scale; unsigned long tb_to_ns_shift; @@ -98,7 +99,6 @@ unsigned long tb_to_ns_shift; struct gettimeofday_struct do_gtod; extern unsigned long wall_jiffies; -extern unsigned long lpevent_count; extern int smp_tb_synchronized; extern struct timezone sys_tz; @@ -107,6 +107,9 @@ void ppc_adjtimex(void); static unsigned adjusting_time = 0; +unsigned long ppc_proc_freq; +unsigned long ppc_tb_freq; + static __inline__ void timer_check_rtc(void) { /* @@ -363,11 +366,8 @@ int timer_interrupt(struct pt_regs * regs) set_dec(next_dec); #ifdef CONFIG_PPC_ISERIES - { - struct ItLpQueue *lpq = lpaca->lpqueue_ptr; - if (lpq && ItLpQueue_isLpIntPending(lpq)) - lpevent_count += ItLpQueue_process(lpq, regs); - } + if (hvlpevent_is_pending()) + process_hvlpevents(regs); #endif /* collect purr register values often, for accurate calculations */ @@ -472,6 +472,66 @@ int do_settimeofday(struct timespec *tv) EXPORT_SYMBOL(do_settimeofday); +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_MAPLE) || defined(CONFIG_PPC_BPA) +void __init generic_calibrate_decr(void) +{ + struct device_node *cpu; + struct div_result divres; + unsigned int *fp; + int node_found; + + /* + * The cpu node should have a timebase-frequency property + * to tell us the rate at which the decrementer counts. + */ + cpu = of_find_node_by_type(NULL, "cpu"); + + ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */ + node_found = 0; + if (cpu != 0) { + fp = (unsigned int *)get_property(cpu, "timebase-frequency", + NULL); + if (fp != 0) { + node_found = 1; + ppc_tb_freq = *fp; + } + } + if (!node_found) + printk(KERN_ERR "WARNING: Estimating decrementer frequency " + "(not found)\n"); + + ppc_proc_freq = DEFAULT_PROC_FREQ; + node_found = 0; + if (cpu != 0) { + fp = (unsigned int *)get_property(cpu, "clock-frequency", + NULL); + if (fp != 0) { + node_found = 1; + ppc_proc_freq = *fp; + } + } + if (!node_found) + printk(KERN_ERR "WARNING: Estimating processor frequency " + "(not found)\n"); + + of_node_put(cpu); + + printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", + ppc_tb_freq/1000000, ppc_tb_freq%1000000); + printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n", + ppc_proc_freq/1000000, ppc_proc_freq%1000000); + + tb_ticks_per_jiffy = ppc_tb_freq / HZ; + tb_ticks_per_sec = tb_ticks_per_jiffy * HZ; + tb_ticks_per_usec = ppc_tb_freq / 1000000; + tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); + div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres); + tb_to_xs = divres.result_low; + + setup_default_decr(); +} +#endif + void __init time_init(void) { /* This function is only called on the boot processor */ diff --git a/arch/ppc64/kernel/traps.c b/arch/ppc64/kernel/traps.c index 7e52cb2605e0..a8d5e83ee89f 100644 --- a/arch/ppc64/kernel/traps.c +++ b/arch/ppc64/kernel/traps.c @@ -126,6 +126,10 @@ int die(const char *str, struct pt_regs *regs, long err) printk("POWERMAC "); nl = 1; break; + case PLATFORM_BPA: + printk("BPA "); + nl = 1; + break; } if (nl) printk("\n"); diff --git a/arch/ppc64/kernel/udbg.c b/arch/ppc64/kernel/udbg.c index d4ccd6f1ef47..c0da45540f0f 100644 --- a/arch/ppc64/kernel/udbg.c +++ b/arch/ppc64/kernel/udbg.c @@ -141,7 +141,7 @@ void udbg_init_scc(struct device_node *np) #endif /* CONFIG_PPC_PMAC */ -#if CONFIG_PPC_PMAC +#ifdef CONFIG_PPC_PMAC static void udbg_real_putc(unsigned char c) { while ((real_readb(sccc) & SCC_TXRDY) == 0) diff --git a/arch/ppc64/kernel/vdso32/vdso32.lds.S b/arch/ppc64/kernel/vdso32/vdso32.lds.S index 11290c902ba3..6f87a916a394 100644 --- a/arch/ppc64/kernel/vdso32/vdso32.lds.S +++ b/arch/ppc64/kernel/vdso32/vdso32.lds.S @@ -40,9 +40,9 @@ SECTIONS .gcc_except_table : { *(.gcc_except_table) } .fixup : { *(.fixup) } - .got ALIGN(4) : { *(.got.plt) *(.got) } - .dynamic : { *(.dynamic) } :text :dynamic + .got : { *(.got) } + .plt : { *(.plt) } _end = .; __end = .; diff --git a/arch/ppc64/kernel/xics.c b/arch/ppc64/kernel/xics.c index 879f39b90a33..d9dc6f28d050 100644 --- a/arch/ppc64/kernel/xics.c +++ b/arch/ppc64/kernel/xics.c @@ -647,6 +647,32 @@ static void xics_set_affinity(unsigned int virq, cpumask_t cpumask) } } +void xics_teardown_cpu(int secondary) +{ + int cpu = smp_processor_id(); + + ops->cppr_info(cpu, 0x00); + iosync(); + + /* + * Some machines need to have at least one cpu in the GIQ, + * so leave the master cpu in the group. + */ + if (secondary) { + /* + * we need to EOI the IPI if we got here from kexec down IPI + * + * probably need to check all the other interrupts too + * should we be flagging idle loop instead? + * or creating some task to be scheduled? + */ + ops->xirr_info_set(cpu, XICS_IPI); + rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, + (1UL << interrupt_server_size) - 1 - + default_distrib_server, 0); + } +} + #ifdef CONFIG_HOTPLUG_CPU /* Interrupts are disabled. */ diff --git a/arch/ppc64/mm/Makefile b/arch/ppc64/mm/Makefile index ac522d57b2a7..3695d00d347f 100644 --- a/arch/ppc64/mm/Makefile +++ b/arch/ppc64/mm/Makefile @@ -6,6 +6,6 @@ EXTRA_CFLAGS += -mno-minimal-toc obj-y := fault.o init.o imalloc.o hash_utils.o hash_low.o tlb.o \ slb_low.o slb.o stab.o mmap.o -obj-$(CONFIG_DISCONTIGMEM) += numa.o +obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_PPC_MULTIPLATFORM) += hash_native.o diff --git a/arch/ppc64/mm/hash_low.S b/arch/ppc64/mm/hash_low.S index c23d46956dd9..fbff24827ae7 100644 --- a/arch/ppc64/mm/hash_low.S +++ b/arch/ppc64/mm/hash_low.S @@ -170,9 +170,7 @@ htab_insert_pte: /* Call ppc_md.hpte_insert */ ld r7,STK_PARM(r4)(r1) /* Retreive new pp bits */ mr r4,r29 /* Retreive va */ - li r6,0 /* primary slot */ - li r8,0 /* not bolted and not large */ - li r9,0 + li r6,0 /* no vflags */ _GLOBAL(htab_call_hpte_insert1) bl . /* Will be patched by htab_finish_init() */ cmpdi 0,r3,0 @@ -192,9 +190,7 @@ _GLOBAL(htab_call_hpte_insert1) /* Call ppc_md.hpte_insert */ ld r7,STK_PARM(r4)(r1) /* Retreive new pp bits */ mr r4,r29 /* Retreive va */ - li r6,1 /* secondary slot */ - li r8,0 /* not bolted and not large */ - li r9,0 + li r6,HPTE_V_SECONDARY@l /* secondary slot */ _GLOBAL(htab_call_hpte_insert2) bl . /* Will be patched by htab_finish_init() */ cmpdi 0,r3,0 diff --git a/arch/ppc64/mm/hash_native.c b/arch/ppc64/mm/hash_native.c index 52b6b9305341..a6abd3a979bf 100644 --- a/arch/ppc64/mm/hash_native.c +++ b/arch/ppc64/mm/hash_native.c @@ -27,9 +27,9 @@ static DEFINE_SPINLOCK(native_tlbie_lock); -static inline void native_lock_hpte(HPTE *hptep) +static inline void native_lock_hpte(hpte_t *hptep) { - unsigned long *word = &hptep->dw0.dword0; + unsigned long *word = &hptep->v; while (1) { if (!test_and_set_bit(HPTE_LOCK_BIT, word)) @@ -39,32 +39,28 @@ static inline void native_lock_hpte(HPTE *hptep) } } -static inline void native_unlock_hpte(HPTE *hptep) +static inline void native_unlock_hpte(hpte_t *hptep) { - unsigned long *word = &hptep->dw0.dword0; + unsigned long *word = &hptep->v; asm volatile("lwsync":::"memory"); clear_bit(HPTE_LOCK_BIT, word); } long native_hpte_insert(unsigned long hpte_group, unsigned long va, - unsigned long prpn, int secondary, - unsigned long hpteflags, int bolted, int large) + unsigned long prpn, unsigned long vflags, + unsigned long rflags) { unsigned long arpn = physRpn_to_absRpn(prpn); - HPTE *hptep = htab_address + hpte_group; - Hpte_dword0 dw0; - HPTE lhpte; + hpte_t *hptep = htab_address + hpte_group; + unsigned long hpte_v, hpte_r; int i; for (i = 0; i < HPTES_PER_GROUP; i++) { - dw0 = hptep->dw0.dw0; - - if (!dw0.v) { + if (! (hptep->v & HPTE_V_VALID)) { /* retry with lock held */ native_lock_hpte(hptep); - dw0 = hptep->dw0.dw0; - if (!dw0.v) + if (! (hptep->v & HPTE_V_VALID)) break; native_unlock_hpte(hptep); } @@ -75,56 +71,45 @@ long native_hpte_insert(unsigned long hpte_group, unsigned long va, if (i == HPTES_PER_GROUP) return -1; - lhpte.dw1.dword1 = 0; - lhpte.dw1.dw1.rpn = arpn; - lhpte.dw1.flags.flags = hpteflags; - - lhpte.dw0.dword0 = 0; - lhpte.dw0.dw0.avpn = va >> 23; - lhpte.dw0.dw0.h = secondary; - lhpte.dw0.dw0.bolted = bolted; - lhpte.dw0.dw0.v = 1; - - if (large) { - lhpte.dw0.dw0.l = 1; - lhpte.dw0.dw0.avpn &= ~0x1UL; - } - - hptep->dw1.dword1 = lhpte.dw1.dword1; + hpte_v = (va >> 23) << HPTE_V_AVPN_SHIFT | vflags | HPTE_V_VALID; + if (vflags & HPTE_V_LARGE) + va &= ~(1UL << HPTE_V_AVPN_SHIFT); + hpte_r = (arpn << HPTE_R_RPN_SHIFT) | rflags; + hptep->r = hpte_r; /* Guarantee the second dword is visible before the valid bit */ __asm__ __volatile__ ("eieio" : : : "memory"); - /* * Now set the first dword including the valid bit * NOTE: this also unlocks the hpte */ - hptep->dw0.dword0 = lhpte.dw0.dword0; + hptep->v = hpte_v; __asm__ __volatile__ ("ptesync" : : : "memory"); - return i | (secondary << 3); + return i | (!!(vflags & HPTE_V_SECONDARY) << 3); } static long native_hpte_remove(unsigned long hpte_group) { - HPTE *hptep; - Hpte_dword0 dw0; + hpte_t *hptep; int i; int slot_offset; + unsigned long hpte_v; /* pick a random entry to start at */ slot_offset = mftb() & 0x7; for (i = 0; i < HPTES_PER_GROUP; i++) { hptep = htab_address + hpte_group + slot_offset; - dw0 = hptep->dw0.dw0; + hpte_v = hptep->v; - if (dw0.v && !dw0.bolted) { + if ((hpte_v & HPTE_V_VALID) && !(hpte_v & HPTE_V_BOLTED)) { /* retry with lock held */ native_lock_hpte(hptep); - dw0 = hptep->dw0.dw0; - if (dw0.v && !dw0.bolted) + hpte_v = hptep->v; + if ((hpte_v & HPTE_V_VALID) + && !(hpte_v & HPTE_V_BOLTED)) break; native_unlock_hpte(hptep); } @@ -137,15 +122,15 @@ static long native_hpte_remove(unsigned long hpte_group) return -1; /* Invalidate the hpte. NOTE: this also unlocks it */ - hptep->dw0.dword0 = 0; + hptep->v = 0; return i; } -static inline void set_pp_bit(unsigned long pp, HPTE *addr) +static inline void set_pp_bit(unsigned long pp, hpte_t *addr) { unsigned long old; - unsigned long *p = &addr->dw1.dword1; + unsigned long *p = &addr->r; __asm__ __volatile__( "1: ldarx %0,0,%3\n\ @@ -163,11 +148,11 @@ static inline void set_pp_bit(unsigned long pp, HPTE *addr) */ static long native_hpte_find(unsigned long vpn) { - HPTE *hptep; + hpte_t *hptep; unsigned long hash; unsigned long i, j; long slot; - Hpte_dword0 dw0; + unsigned long hpte_v; hash = hpt_hash(vpn, 0); @@ -175,10 +160,11 @@ static long native_hpte_find(unsigned long vpn) slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; for (i = 0; i < HPTES_PER_GROUP; i++) { hptep = htab_address + slot; - dw0 = hptep->dw0.dw0; + hpte_v = hptep->v; - if ((dw0.avpn == (vpn >> 11)) && dw0.v && - (dw0.h == j)) { + if ((HPTE_V_AVPN_VAL(hpte_v) == (vpn >> 11)) + && (hpte_v & HPTE_V_VALID) + && ( !!(hpte_v & HPTE_V_SECONDARY) == j)) { /* HPTE matches */ if (j) slot = -slot; @@ -195,20 +181,21 @@ static long native_hpte_find(unsigned long vpn) static long native_hpte_updatepp(unsigned long slot, unsigned long newpp, unsigned long va, int large, int local) { - HPTE *hptep = htab_address + slot; - Hpte_dword0 dw0; + hpte_t *hptep = htab_address + slot; + unsigned long hpte_v; unsigned long avpn = va >> 23; int ret = 0; if (large) - avpn &= ~0x1UL; + avpn &= ~1; native_lock_hpte(hptep); - dw0 = hptep->dw0.dw0; + hpte_v = hptep->v; /* Even if we miss, we need to invalidate the TLB */ - if ((dw0.avpn != avpn) || !dw0.v) { + if ((HPTE_V_AVPN_VAL(hpte_v) != avpn) + || !(hpte_v & HPTE_V_VALID)) { native_unlock_hpte(hptep); ret = -1; } else { @@ -244,7 +231,7 @@ static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea) { unsigned long vsid, va, vpn, flags = 0; long slot; - HPTE *hptep; + hpte_t *hptep; int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE); vsid = get_kernel_vsid(ea); @@ -269,26 +256,27 @@ static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea) static void native_hpte_invalidate(unsigned long slot, unsigned long va, int large, int local) { - HPTE *hptep = htab_address + slot; - Hpte_dword0 dw0; + hpte_t *hptep = htab_address + slot; + unsigned long hpte_v; unsigned long avpn = va >> 23; unsigned long flags; int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE); if (large) - avpn &= ~0x1UL; + avpn &= ~1; local_irq_save(flags); native_lock_hpte(hptep); - dw0 = hptep->dw0.dw0; + hpte_v = hptep->v; /* Even if we miss, we need to invalidate the TLB */ - if ((dw0.avpn != avpn) || !dw0.v) { + if ((HPTE_V_AVPN_VAL(hpte_v) != avpn) + || !(hpte_v & HPTE_V_VALID)) { native_unlock_hpte(hptep); } else { /* Invalidate the hpte. NOTE: this also unlocks it */ - hptep->dw0.dword0 = 0; + hptep->v = 0; } /* Invalidate the tlb */ @@ -304,13 +292,57 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long va, local_irq_restore(flags); } +/* + * clear all mappings on kexec. All cpus are in real mode (or they will + * be when they isi), and we are the only one left. We rely on our kernel + * mapping being 0xC0's and the hardware ignoring those two real bits. + * + * TODO: add batching support when enabled. remember, no dynamic memory here, + * athough there is the control page available... + */ +static void native_hpte_clear(void) +{ + unsigned long slot, slots, flags; + hpte_t *hptep = htab_address; + unsigned long hpte_v; + unsigned long pteg_count; + + pteg_count = htab_hash_mask + 1; + + local_irq_save(flags); + + /* we take the tlbie lock and hold it. Some hardware will + * deadlock if we try to tlbie from two processors at once. + */ + spin_lock(&native_tlbie_lock); + + slots = pteg_count * HPTES_PER_GROUP; + + for (slot = 0; slot < slots; slot++, hptep++) { + /* + * we could lock the pte here, but we are the only cpu + * running, right? and for crash dump, we probably + * don't want to wait for a maybe bad cpu. + */ + hpte_v = hptep->v; + + if (hpte_v & HPTE_V_VALID) { + hptep->v = 0; + tlbie(slot2va(hpte_v, slot), hpte_v & HPTE_V_LARGE); + } + } + + spin_unlock(&native_tlbie_lock); + local_irq_restore(flags); +} + static void native_flush_hash_range(unsigned long context, unsigned long number, int local) { unsigned long vsid, vpn, va, hash, secondary, slot, flags, avpn; int i, j; - HPTE *hptep; - Hpte_dword0 dw0; + hpte_t *hptep; + unsigned long hpte_v; struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); /* XXX fix for large ptes */ @@ -346,14 +378,15 @@ static void native_flush_hash_range(unsigned long context, native_lock_hpte(hptep); - dw0 = hptep->dw0.dw0; + hpte_v = hptep->v; /* Even if we miss, we need to invalidate the TLB */ - if ((dw0.avpn != avpn) || !dw0.v) { + if ((HPTE_V_AVPN_VAL(hpte_v) != avpn) + || !(hpte_v & HPTE_V_VALID)) { native_unlock_hpte(hptep); } else { /* Invalidate the hpte. NOTE: this also unlocks it */ - hptep->dw0.dword0 = 0; + hptep->v = 0; } j++; @@ -415,7 +448,8 @@ void hpte_init_native(void) ppc_md.hpte_updatepp = native_hpte_updatepp; ppc_md.hpte_updateboltedpp = native_hpte_updateboltedpp; ppc_md.hpte_insert = native_hpte_insert; - ppc_md.hpte_remove = native_hpte_remove; + ppc_md.hpte_remove = native_hpte_remove; + ppc_md.hpte_clear_all = native_hpte_clear; if (tlb_batching_enabled()) ppc_md.flush_hash_range = native_flush_hash_range; htab_finish_init(); diff --git a/arch/ppc64/mm/hash_utils.c b/arch/ppc64/mm/hash_utils.c index 1647b1c6f28e..623b5d130c31 100644 --- a/arch/ppc64/mm/hash_utils.c +++ b/arch/ppc64/mm/hash_utils.c @@ -75,8 +75,8 @@ extern unsigned long dart_tablebase; #endif /* CONFIG_U3_DART */ -HPTE *htab_address; -unsigned long htab_hash_mask; +hpte_t *htab_address; +unsigned long htab_hash_mask; extern unsigned long _SDR1; @@ -97,11 +97,15 @@ static inline void create_pte_mapping(unsigned long start, unsigned long end, unsigned long addr; unsigned int step; unsigned long tmp_mode; + unsigned long vflags; - if (large) + if (large) { step = 16*MB; - else + vflags = HPTE_V_BOLTED | HPTE_V_LARGE; + } else { step = 4*KB; + vflags = HPTE_V_BOLTED; + } for (addr = start; addr < end; addr += step) { unsigned long vpn, hash, hpteg; @@ -129,12 +133,12 @@ static inline void create_pte_mapping(unsigned long start, unsigned long end, if (systemcfg->platform & PLATFORM_LPAR) ret = pSeries_lpar_hpte_insert(hpteg, va, virt_to_abs(addr) >> PAGE_SHIFT, - 0, tmp_mode, 1, large); + vflags, tmp_mode); else #endif /* CONFIG_PPC_PSERIES */ ret = native_hpte_insert(hpteg, va, virt_to_abs(addr) >> PAGE_SHIFT, - 0, tmp_mode, 1, large); + vflags, tmp_mode); if (ret == -1) { ppc64_terminate_msg(0x20, "create_pte_mapping"); diff --git a/arch/ppc64/mm/hugetlbpage.c b/arch/ppc64/mm/hugetlbpage.c index fdcfe97c75c1..f9524602818d 100644 --- a/arch/ppc64/mm/hugetlbpage.c +++ b/arch/ppc64/mm/hugetlbpage.c @@ -583,7 +583,7 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access, pte_t *ptep; unsigned long va, vpn; pte_t old_pte, new_pte; - unsigned long hpteflags, prpn; + unsigned long rflags, prpn; long slot; int err = 1; @@ -626,9 +626,9 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access, old_pte = *ptep; new_pte = old_pte; - hpteflags = 0x2 | (! (pte_val(new_pte) & _PAGE_RW)); + rflags = 0x2 | (! (pte_val(new_pte) & _PAGE_RW)); /* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */ - hpteflags |= ((pte_val(new_pte) & _PAGE_EXEC) ? 0 : HW_NO_EXEC); + rflags |= ((pte_val(new_pte) & _PAGE_EXEC) ? 0 : HW_NO_EXEC); /* Check if pte already has an hpte (case 2) */ if (unlikely(pte_val(old_pte) & _PAGE_HASHPTE)) { @@ -641,7 +641,7 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access, slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; slot += (pte_val(old_pte) & _PAGE_GROUP_IX) >> 12; - if (ppc_md.hpte_updatepp(slot, hpteflags, va, 1, local) == -1) + if (ppc_md.hpte_updatepp(slot, rflags, va, 1, local) == -1) pte_val(old_pte) &= ~_PAGE_HPTEFLAGS; } @@ -661,10 +661,10 @@ repeat: /* Add in WIMG bits */ /* XXX We should store these in the pte */ - hpteflags |= _PAGE_COHERENT; + rflags |= _PAGE_COHERENT; - slot = ppc_md.hpte_insert(hpte_group, va, prpn, 0, - hpteflags, 0, 1); + slot = ppc_md.hpte_insert(hpte_group, va, prpn, + HPTE_V_LARGE, rflags); /* Primary is full, try the secondary */ if (unlikely(slot == -1)) { @@ -672,7 +672,7 @@ repeat: hpte_group = ((~hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL; slot = ppc_md.hpte_insert(hpte_group, va, prpn, - 1, hpteflags, 0, 1); + HPTE_V_LARGE, rflags); if (slot == -1) { if (mftb() & 0x1) hpte_group = ((hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL; diff --git a/arch/ppc64/mm/init.c b/arch/ppc64/mm/init.c index 6fa1e6490b57..e58a24d42879 100644 --- a/arch/ppc64/mm/init.c +++ b/arch/ppc64/mm/init.c @@ -98,7 +98,7 @@ void show_mem(void) printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); for_each_pgdat(pgdat) { for (i = 0; i < pgdat->node_spanned_pages; i++) { - page = pgdat->node_mem_map + i; + page = pgdat_page_nr(pgdat, i); total++; if (PageReserved(page)) reserved++; @@ -180,9 +180,10 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags) hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); /* Panic if a pte grpup is full */ - if (ppc_md.hpte_insert(hpteg, va, pa >> PAGE_SHIFT, 0, - _PAGE_NO_CACHE|_PAGE_GUARDED|PP_RWXX, - 1, 0) == -1) { + if (ppc_md.hpte_insert(hpteg, va, pa >> PAGE_SHIFT, + HPTE_V_BOLTED, + _PAGE_NO_CACHE|_PAGE_GUARDED|PP_RWXX) + == -1) { panic("map_io_page: could not insert mapping"); } } @@ -531,7 +532,7 @@ EXPORT_SYMBOL(page_is_ram); * Initialize the bootmem system and give it all the memory we * have available. */ -#ifndef CONFIG_DISCONTIGMEM +#ifndef CONFIG_NEED_MULTIPLE_NODES void __init do_init_bootmem(void) { unsigned long i; @@ -553,12 +554,20 @@ void __init do_init_bootmem(void) max_pfn = max_low_pfn; - /* add all physical memory to the bootmem map. Also find the first */ + /* Add all physical memory to the bootmem map, mark each area + * present. + */ for (i=0; i < lmb.memory.cnt; i++) { unsigned long physbase, size; + unsigned long start_pfn, end_pfn; physbase = lmb.memory.region[i].physbase; size = lmb.memory.region[i].size; + + start_pfn = physbase >> PAGE_SHIFT; + end_pfn = start_pfn + (size >> PAGE_SHIFT); + memory_present(0, start_pfn, end_pfn); + free_bootmem(physbase, size); } @@ -597,7 +606,7 @@ void __init paging_init(void) free_area_init_node(0, NODE_DATA(0), zones_size, __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size); } -#endif /* CONFIG_DISCONTIGMEM */ +#endif /* ! CONFIG_NEED_MULTIPLE_NODES */ static struct kcore_list kcore_vmem; @@ -628,7 +637,7 @@ module_init(setup_kcore); void __init mem_init(void) { -#ifdef CONFIG_DISCONTIGMEM +#ifdef CONFIG_NEED_MULTIPLE_NODES int nid; #endif pg_data_t *pgdat; @@ -639,7 +648,7 @@ void __init mem_init(void) num_physpages = max_low_pfn; /* RAM is assumed contiguous */ high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); -#ifdef CONFIG_DISCONTIGMEM +#ifdef CONFIG_NEED_MULTIPLE_NODES for_each_online_node(nid) { if (NODE_DATA(nid)->node_spanned_pages != 0) { printk("freeing bootmem node %x\n", nid); @@ -654,7 +663,7 @@ void __init mem_init(void) for_each_pgdat(pgdat) { for (i = 0; i < pgdat->node_spanned_pages; i++) { - page = pgdat->node_mem_map + i; + page = pgdat_page_nr(pgdat, i); if (PageReserved(page)) reservedpages++; } diff --git a/arch/ppc64/mm/numa.c b/arch/ppc64/mm/numa.c index ea862ec643d3..0b191f2de016 100644 --- a/arch/ppc64/mm/numa.c +++ b/arch/ppc64/mm/numa.c @@ -440,6 +440,8 @@ new_range: for (i = start ; i < (start+size); i += MEMORY_INCREMENT) numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] = numa_domain; + memory_present(numa_domain, start >> PAGE_SHIFT, + (start + size) >> PAGE_SHIFT); if (--ranges) goto new_range; @@ -481,6 +483,7 @@ static void __init setup_nonnuma(void) for (i = 0 ; i < top_of_ram; i += MEMORY_INCREMENT) numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] = 0; + memory_present(0, 0, init_node_data[0].node_end_pfn); } static void __init dump_numa_topology(void) @@ -644,7 +647,12 @@ void __init do_init_bootmem(void) new_range: mem_start = read_n_cells(addr_cells, &memcell_buf); mem_size = read_n_cells(size_cells, &memcell_buf); - numa_domain = numa_enabled ? of_node_numa_domain(memory) : 0; + if (numa_enabled) { + numa_domain = of_node_numa_domain(memory); + if (numa_domain >= MAX_NUMNODES) + numa_domain = 0; + } else + numa_domain = 0; if (numa_domain != nid) continue; diff --git a/arch/ppc64/mm/stab.c b/arch/ppc64/mm/stab.c index df4bbe14153c..1b83f002bf27 100644 --- a/arch/ppc64/mm/stab.c +++ b/arch/ppc64/mm/stab.c @@ -18,6 +18,8 @@ #include <asm/mmu_context.h> #include <asm/paca.h> #include <asm/cputable.h> +#include <asm/lmb.h> +#include <asm/abs_addr.h> struct stab_entry { unsigned long esid_data; @@ -224,6 +226,39 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm) extern void slb_initialize(void); /* + * Allocate segment tables for secondary CPUs. These must all go in + * the first (bolted) segment, so that do_stab_bolted won't get a + * recursive segment miss on the segment table itself. + */ +void stabs_alloc(void) +{ + int cpu; + + if (cpu_has_feature(CPU_FTR_SLB)) + return; + + for_each_cpu(cpu) { + unsigned long newstab; + + if (cpu == 0) + continue; /* stab for CPU 0 is statically allocated */ + + newstab = lmb_alloc_base(PAGE_SIZE, PAGE_SIZE, 1<<SID_SHIFT); + if (! newstab) + panic("Unable to allocate segment table for CPU %d.\n", + cpu); + + newstab += KERNELBASE; + + memset((void *)newstab, 0, PAGE_SIZE); + + paca[cpu].stab_addr = newstab; + paca[cpu].stab_real = virt_to_abs(newstab); + printk(KERN_DEBUG "Segment table for CPU %d at 0x%lx virtual, 0x%lx absolute\n", cpu, paca[cpu].stab_addr, paca[cpu].stab_real); + } +} + +/* * Build an entry for the base kernel segment and put it into * the segment table or SLB. All other segment table or SLB * entries are faulted in. diff --git a/arch/ppc64/xmon/xmon.c b/arch/ppc64/xmon/xmon.c index 7f6e13a4b71e..05539439e6bc 100644 --- a/arch/ppc64/xmon/xmon.c +++ b/arch/ppc64/xmon/xmon.c @@ -329,13 +329,16 @@ int xmon_core(struct pt_regs *regs, int fromipi) printf("cpu 0x%x: Exception %lx %s in xmon, " "returning to main loop\n", cpu, regs->trap, getvecname(TRAP(regs))); + release_output_lock(); longjmp(xmon_fault_jmp[cpu], 1); } if (setjmp(recurse_jmp) != 0) { if (!in_xmon || !xmon_gate) { + get_output_lock(); printf("xmon: WARNING: bad recursive fault " "on cpu 0x%x\n", cpu); + release_output_lock(); goto waiting; } secondary = !(xmon_taken && cpu == xmon_owner); diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index ab79af84699a..477ac2758bd5 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -226,6 +226,8 @@ config WARN_STACK_SIZE This allows you to specify the maximum frame size a function may have without the compiler complaining about it. +source "mm/Kconfig" + comment "I/O subsystem configuration" config MACHCHK_WARNING @@ -453,8 +455,18 @@ config NO_IDLE_HZ_INIT The HZ timer is switched off in idle by default. That means the HZ timer is already disabled at boot time. +config KEXEC + bool "kexec system call (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but is independent of hardware/microcode support. + endmenu +source "net/Kconfig" + config PCMCIA bool default n @@ -465,7 +477,7 @@ source "drivers/scsi/Kconfig" source "drivers/s390/Kconfig" -source "net/Kconfig" +source "drivers/net/Kconfig" source "fs/Kconfig" diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index c067435bae45..c9f2f60cfa58 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -232,7 +232,11 @@ static int appldata_diag(char record_nr, u16 function, unsigned long buffer, ry = -1; asm volatile( "diag %1,%0,0xDC\n\t" - : "=d" (ry) : "d" (&(appldata_parameter_list)) : "cc"); + : "=d" (ry) + : "d" (&appldata_parameter_list), + "m" (appldata_parameter_list), + "m" (appldata_product_id) + : "cc"); return (int) ry; } /************************ timer, work, DIAG <END> ****************************/ diff --git a/arch/s390/boot/install.sh b/arch/s390/boot/install.sh index 278a8139cb18..d4026f62cb06 100644 --- a/arch/s390/boot/install.sh +++ b/arch/s390/boot/install.sh @@ -21,8 +21,8 @@ # User may have a custom install script -if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi -if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi +if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi +if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi # Default install - same as make zlilo diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 07fd0414a4bf..0865251a3f44 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc3 -# Fri Apr 22 15:30:58 2005 +# Linux kernel version: 2.6.13-rc4 +# Fri Jul 29 14:49:30 2005 # CONFIG_MMU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y @@ -23,10 +23,11 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set +CONFIG_AUDIT=y +# CONFIG_AUDITSYSCALL is not set CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y @@ -36,6 +37,8 @@ CONFIG_IKCONFIG_PROC=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -51,9 +54,10 @@ CONFIG_BASE_SMALL=0 # Loadable module support # CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set +CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y @@ -81,8 +85,15 @@ CONFIG_MARCH_G5=y # CONFIG_MARCH_Z990 is not set CONFIG_PACK_STACK=y # CONFIG_SMALL_STACK is not set -# CONFIG_CHECK_STACK is not set +CONFIG_CHECK_STACK=y +CONFIG_STACK_GUARD=256 # CONFIG_WARN_STACK is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y # # I/O subsystem configuration @@ -95,7 +106,7 @@ CONFIG_QDIO=y # # Misc # -# CONFIG_PREEMPT is not set +CONFIG_PREEMPT=y CONFIG_IPL=y # CONFIG_IPL_TAPE is not set CONFIG_IPL_VM=y @@ -105,9 +116,110 @@ CONFIG_BINFMT_MISC=m CONFIG_PFAULT=y # CONFIG_SHARED_KERNEL is not set # CONFIG_CMM is not set -# CONFIG_VIRT_TIMER is not set +CONFIG_VIRT_TIMER=y +CONFIG_VIRT_CPU_ACCOUNTING=y +# CONFIG_APPLDATA_BASE is not set CONFIG_NO_IDLE_HZ=y CONFIG_NO_IDLE_HZ_INIT=y +# CONFIG_KEXEC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +CONFIG_IP_TCPDIAG_IPV6=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CLK_JIFFIES=y +# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set +# CONFIG_NET_SCH_CLK_CPU is not set +CONFIG_NET_SCH_CBQ=m +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_INGRESS is not set +CONFIG_NET_QOS=y +CONFIG_NET_ESTIMATOR=y +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +# CONFIG_CLS_U32_PERF is not set +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_POLICE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set # CONFIG_PCMCIA is not set # @@ -133,6 +245,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -205,7 +318,13 @@ CONFIG_MD_RAID5=m # CONFIG_MD_RAID6 is not set CONFIG_MD_MULTIPATH=m # CONFIG_MD_FAULTY is not set -# CONFIG_BLK_DEV_DM is not set +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=y +CONFIG_DM_SNAPSHOT=y +CONFIG_DM_MIRROR=y +CONFIG_DM_ZERO=y +CONFIG_DM_MULTIPATH=y +# CONFIG_DM_MULTIPATH_EMC is not set # # Character device drivers @@ -231,7 +350,8 @@ CONFIG_CCW_CONSOLE=y CONFIG_SCLP=y CONFIG_SCLP_TTY=y CONFIG_SCLP_CONSOLE=y -# CONFIG_SCLP_VT220_TTY is not set +CONFIG_SCLP_VT220_TTY=y +CONFIG_SCLP_VT220_CONSOLE=y CONFIG_SCLP_CPI=m CONFIG_S390_TAPE=m @@ -245,6 +365,7 @@ CONFIG_S390_TAPE_BLOCK=y # CONFIG_S390_TAPE_34XX=m # CONFIG_VMLOGRDR is not set +# CONFIG_VMCP is not set # CONFIG_MONREADER is not set # CONFIG_DCSS_SHM is not set @@ -254,105 +375,8 @@ CONFIG_S390_TAPE_34XX=m CONFIG_Z90CRYPT=m # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -CONFIG_IP_TCPDIAG_IPV6=y -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_NETFILTER is not set -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CLK_JIFFIES=y -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -# CONFIG_NET_SCH_CLK_CPU is not set -CONFIG_NET_SCH_CBQ=m -# CONFIG_NET_SCH_HTB is not set -# CONFIG_NET_SCH_HFSC is not set -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -# CONFIG_NET_SCH_NETEM is not set -# CONFIG_NET_SCH_INGRESS is not set -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y -CONFIG_NET_CLS=y -# CONFIG_NET_CLS_BASIC is not set -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set -CONFIG_NET_CLS_POLICE=y - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m @@ -410,12 +434,15 @@ CONFIG_CCWGROUP=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -425,6 +452,7 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # # XFS support @@ -432,6 +460,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -456,7 +485,6 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set @@ -485,15 +513,18 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -543,11 +574,12 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # # Security options diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index b41e0e199a7c..ab1e49d2e518 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -25,6 +25,16 @@ obj-$(CONFIG_ARCH_S390X) += entry64.o reipl64.o obj-$(CONFIG_VIRT_TIMER) += vtime.o +# Kexec part +S390_KEXEC_OBJS := machine_kexec.o crash.o +ifeq ($(CONFIG_ARCH_S390X),y) +S390_KEXEC_OBJS += relocate_kernel64.o +else +S390_KEXEC_OBJS += relocate_kernel.o +endif +obj-$(CONFIG_KEXEC) += $(S390_KEXEC_OBJS) + + # # This is just to get the dependencies... # diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index 614056222875..18610cea03a2 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -58,6 +58,7 @@ #include <linux/compat.h> #include <linux/vfs.h> #include <linux/ptrace.h> +#include <linux/fadvise.h> #include <asm/types.h> #include <asm/ipc.h> @@ -1043,3 +1044,40 @@ sys32_timer_create(clockid_t which_clock, struct compat_sigevent *se32, return ret; } + +/* + * 31 bit emulation wrapper functions for sys_fadvise64/fadvise64_64. + * These need to rewrite the advise values for POSIX_FADV_{DONTNEED,NOREUSE} + * because the 31 bit values differ from the 64 bit values. + */ + +asmlinkage long +sys32_fadvise64(int fd, loff_t offset, size_t len, int advise) +{ + if (advise == 4) + advise = POSIX_FADV_DONTNEED; + else if (advise == 5) + advise = POSIX_FADV_NOREUSE; + return sys_fadvise64(fd, offset, len, advise); +} + +struct fadvise64_64_args { + int fd; + long long offset; + long long len; + int advice; +}; + +asmlinkage long +sys32_fadvise64_64(struct fadvise64_64_args __user *args) +{ + struct fadvise64_64_args a; + + if ( copy_from_user(&a, args, sizeof(a)) ) + return -EFAULT; + if (a.advice == 4) + a.advice = POSIX_FADV_DONTNEED; + else if (a.advice == 5) + a.advice = POSIX_FADV_NOREUSE; + return sys_fadvise64_64(a.fd, a.offset, a.len, a.advice); +} diff --git a/arch/s390/kernel/compat_linux.h b/arch/s390/kernel/compat_linux.h index bf33dcfec7db..3898f66d0b2f 100644 --- a/arch/s390/kernel/compat_linux.h +++ b/arch/s390/kernel/compat_linux.h @@ -45,7 +45,7 @@ typedef struct compat_siginfo { /* POSIX.1b timers */ struct { - timer_t _tid; /* timer id */ + compat_timer_t _tid; /* timer id */ int _overrun; /* overrun count */ compat_sigval_t _sigval; /* same as below */ int _sys_private; /* not to be passed to user */ diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 7a607b1d0380..23fe94e58688 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1251,12 +1251,12 @@ sys32_fadvise64_wrapper: or %r3,%r4 # get low word of 64bit loff_t llgfr %r4,%r5 # size_t (unsigned long) lgfr %r5,%r6 # int - jg sys_fadvise64 + jg sys32_fadvise64 .globl sys32_fadvise64_64_wrapper sys32_fadvise64_64_wrapper: llgtr %r2,%r2 # struct fadvise64_64_args * - jg s390_fadvise64_64 + jg sys32_fadvise64_64 .globl sys32_clock_settime_wrapper sys32_clock_settime_wrapper: @@ -1441,3 +1441,37 @@ compat_sys_waitid_wrapper: lgfr %r5,%r5 # int llgtr %r6,%r6 # struct rusage_emu31 * jg compat_sys_waitid + + .globl compat_sys_kexec_load_wrapper +compat_sys_kexec_load_wrapper: + llgfr %r2,%r2 # unsigned long + llgfr %r3,%r3 # unsigned long + llgtr %r4,%r4 # struct kexec_segment * + llgfr %r5,%r5 # unsigned long + jg compat_sys_kexec_load + + .globl sys_ioprio_set_wrapper +sys_ioprio_set_wrapper: + lgfr %r2,%r2 # int + lgfr %r3,%r3 # int + lgfr %r4,%r4 # int + jg sys_ioprio_set + + .globl sys_ioprio_get_wrapper +sys_ioprio_get_wrapper: + lgfr %r2,%r2 # int + lgfr %r3,%r3 # int + jg sys_ioprio_get + + .globl sys_inotify_add_watch_wrapper +sys_inotify_add_watch_wrapper: + lgfr %r2,%r2 # int + llgtr %r3,%r3 # const char * + llgfr %r4,%r4 # u32 + jg sys_inotify_add_watch + + .globl sys_inotify_rm_watch_wrapper +sys_inotify_rm_watch_wrapper: + lgfr %r2,%r2 # int + llgfr %r3,%r3 # u32 + jg sys_inotify_rm_watch diff --git a/arch/s390/kernel/cpcmd.c b/arch/s390/kernel/cpcmd.c index 44df8dc07c59..20062145e84e 100644 --- a/arch/s390/kernel/cpcmd.c +++ b/arch/s390/kernel/cpcmd.c @@ -2,7 +2,7 @@ * arch/s390/kernel/cpcmd.c * * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Copyright (C) 1999,2005 IBM Deutschland Entwicklung GmbH, IBM Corporation * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), * Christian Borntraeger (cborntra@de.ibm.com), */ @@ -18,93 +18,114 @@ #include <asm/system.h> static DEFINE_SPINLOCK(cpcmd_lock); -static char cpcmd_buf[240]; +static char cpcmd_buf[241]; /* * the caller of __cpcmd has to ensure that the response buffer is below 2 GB */ -void __cpcmd(char *cmd, char *response, int rlen) +int __cpcmd(const char *cmd, char *response, int rlen, int *response_code) { const int mask = 0x40000000L; unsigned long flags; + int return_code; + int return_len; int cmdlen; spin_lock_irqsave(&cpcmd_lock, flags); cmdlen = strlen(cmd); BUG_ON(cmdlen > 240); - strcpy(cpcmd_buf, cmd); + memcpy(cpcmd_buf, cmd, cmdlen); ASCEBC(cpcmd_buf, cmdlen); if (response != NULL && rlen > 0) { memset(response, 0, rlen); #ifndef CONFIG_ARCH_S390X - asm volatile ("LRA 2,0(%0)\n\t" - "LR 4,%1\n\t" - "O 4,%4\n\t" - "LRA 3,0(%2)\n\t" - "LR 5,%3\n\t" - ".long 0x83240008 # Diagnose X'08'\n\t" - : /* no output */ - : "a" (cpcmd_buf), "d" (cmdlen), - "a" (response), "d" (rlen), "m" (mask) - : "cc", "2", "3", "4", "5" ); + asm volatile ( "lra 2,0(%2)\n" + "lr 4,%3\n" + "o 4,%6\n" + "lra 3,0(%4)\n" + "lr 5,%5\n" + "diag 2,4,0x8\n" + "brc 8, .Litfits\n" + "ar 5, %5\n" + ".Litfits: \n" + "lr %0,4\n" + "lr %1,5\n" + : "=d" (return_code), "=d" (return_len) + : "a" (cpcmd_buf), "d" (cmdlen), + "a" (response), "d" (rlen), "m" (mask) + : "cc", "2", "3", "4", "5" ); #else /* CONFIG_ARCH_S390X */ - asm volatile (" lrag 2,0(%0)\n" - " lgr 4,%1\n" - " o 4,%4\n" - " lrag 3,0(%2)\n" - " lgr 5,%3\n" - " sam31\n" - " .long 0x83240008 # Diagnose X'08'\n" - " sam64" - : /* no output */ - : "a" (cpcmd_buf), "d" (cmdlen), - "a" (response), "d" (rlen), "m" (mask) - : "cc", "2", "3", "4", "5" ); + asm volatile ( "lrag 2,0(%2)\n" + "lgr 4,%3\n" + "o 4,%6\n" + "lrag 3,0(%4)\n" + "lgr 5,%5\n" + "sam31\n" + "diag 2,4,0x8\n" + "sam64\n" + "brc 8, .Litfits\n" + "agr 5, %5\n" + ".Litfits: \n" + "lgr %0,4\n" + "lgr %1,5\n" + : "=d" (return_code), "=d" (return_len) + : "a" (cpcmd_buf), "d" (cmdlen), + "a" (response), "d" (rlen), "m" (mask) + : "cc", "2", "3", "4", "5" ); #endif /* CONFIG_ARCH_S390X */ EBCASC(response, rlen); } else { + return_len = 0; #ifndef CONFIG_ARCH_S390X - asm volatile ("LRA 2,0(%0)\n\t" - "LR 3,%1\n\t" - ".long 0x83230008 # Diagnose X'08'\n\t" - : /* no output */ - : "a" (cpcmd_buf), "d" (cmdlen) - : "2", "3" ); + asm volatile ( "lra 2,0(%1)\n" + "lr 3,%2\n" + "diag 2,3,0x8\n" + "lr %0,3\n" + : "=d" (return_code) + : "a" (cpcmd_buf), "d" (cmdlen) + : "2", "3" ); #else /* CONFIG_ARCH_S390X */ - asm volatile (" lrag 2,0(%0)\n" - " lgr 3,%1\n" - " sam31\n" - " .long 0x83230008 # Diagnose X'08'\n" - " sam64" - : /* no output */ - : "a" (cpcmd_buf), "d" (cmdlen) - : "2", "3" ); + asm volatile ( "lrag 2,0(%1)\n" + "lgr 3,%2\n" + "sam31\n" + "diag 2,3,0x8\n" + "sam64\n" + "lgr %0,3\n" + : "=d" (return_code) + : "a" (cpcmd_buf), "d" (cmdlen) + : "2", "3" ); #endif /* CONFIG_ARCH_S390X */ } spin_unlock_irqrestore(&cpcmd_lock, flags); + if (response_code != NULL) + *response_code = return_code; + return return_len; } EXPORT_SYMBOL(__cpcmd); #ifdef CONFIG_ARCH_S390X -void cpcmd(char *cmd, char *response, int rlen) +int cpcmd(const char *cmd, char *response, int rlen, int *response_code) { char *lowbuf; + int len; + if ((rlen == 0) || (response == NULL) || !((unsigned long)response >> 31)) - __cpcmd(cmd, response, rlen); + len = __cpcmd(cmd, response, rlen, response_code); else { lowbuf = kmalloc(rlen, GFP_KERNEL | GFP_DMA); if (!lowbuf) { printk(KERN_WARNING "cpcmd: could not allocate response buffer\n"); - return; + return -ENOMEM; } - __cpcmd(cmd, lowbuf, rlen); + len = __cpcmd(cmd, lowbuf, rlen, response_code); memcpy(response, lowbuf, rlen); kfree(lowbuf); } + return len; } EXPORT_SYMBOL(cpcmd); diff --git a/arch/s390/kernel/crash.c b/arch/s390/kernel/crash.c new file mode 100644 index 000000000000..7bd169c58b0c --- /dev/null +++ b/arch/s390/kernel/crash.c @@ -0,0 +1,17 @@ +/* + * arch/s390/kernel/crash.c + * + * (C) Copyright IBM Corp. 2005 + * + * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com> + * + */ + +#include <linux/threads.h> +#include <linux/kexec.h> + +note_buf_t crash_notes[NR_CPUS]; + +void machine_crash_shutdown(struct pt_regs *regs) +{ +} diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index 91f8ce5543d3..960ba6029c3a 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -19,22 +19,27 @@ #include <linux/sysctl.h> #include <asm/uaccess.h> #include <asm/semaphore.h> - #include <linux/module.h> #include <linux/init.h> +#include <linux/fs.h> +#include <linux/debugfs.h> #include <asm/debug.h> #define DEBUG_PROLOG_ENTRY -1 +#define ALL_AREAS 0 /* copy all debug areas */ +#define NO_AREAS 1 /* copy no debug areas */ + /* typedefs */ typedef struct file_private_info { loff_t offset; /* offset of last read in file */ int act_area; /* number of last formated area */ + int act_page; /* act page in given area */ int act_entry; /* last formated entry (offset */ /* relative to beginning of last */ - /* formated area) */ + /* formated page) */ size_t act_entry_offset; /* up to this offset we copied */ /* in last read the last formated */ /* entry to userland */ @@ -51,8 +56,8 @@ typedef struct * This assumes that all args are converted into longs * on L/390 this is the case for all types of parameter * except of floats, and long long (32 bit) - * - */ + * + */ long args[0]; } debug_sprintf_entry_t; @@ -63,32 +68,38 @@ extern void tod_to_timeval(uint64_t todval, struct timeval *xtime); static int debug_init(void); static ssize_t debug_output(struct file *file, char __user *user_buf, - size_t user_len, loff_t * offset); + size_t user_len, loff_t * offset); static ssize_t debug_input(struct file *file, const char __user *user_buf, - size_t user_len, loff_t * offset); + size_t user_len, loff_t * offset); static int debug_open(struct inode *inode, struct file *file); static int debug_close(struct inode *inode, struct file *file); -static debug_info_t* debug_info_create(char *name, int page_order, int nr_areas, int buf_size); +static debug_info_t* debug_info_create(char *name, int pages_per_area, + int nr_areas, int buf_size); static void debug_info_get(debug_info_t *); static void debug_info_put(debug_info_t *); static int debug_prolog_level_fn(debug_info_t * id, - struct debug_view *view, char *out_buf); + struct debug_view *view, char *out_buf); static int debug_input_level_fn(debug_info_t * id, struct debug_view *view, - struct file *file, const char __user *user_buf, - size_t user_buf_size, loff_t * offset); + struct file *file, const char __user *user_buf, + size_t user_buf_size, loff_t * offset); +static int debug_prolog_pages_fn(debug_info_t * id, + struct debug_view *view, char *out_buf); +static int debug_input_pages_fn(debug_info_t * id, struct debug_view *view, + struct file *file, const char __user *user_buf, + size_t user_buf_size, loff_t * offset); static int debug_input_flush_fn(debug_info_t * id, struct debug_view *view, - struct file *file, const char __user *user_buf, - size_t user_buf_size, loff_t * offset); + struct file *file, const char __user *user_buf, + size_t user_buf_size, loff_t * offset); static int debug_hex_ascii_format_fn(debug_info_t * id, struct debug_view *view, - char *out_buf, const char *in_buf); + char *out_buf, const char *in_buf); static int debug_raw_format_fn(debug_info_t * id, - struct debug_view *view, char *out_buf, - const char *in_buf); + struct debug_view *view, char *out_buf, + const char *in_buf); static int debug_raw_header_fn(debug_info_t * id, struct debug_view *view, - int area, debug_entry_t * entry, char *out_buf); + int area, debug_entry_t * entry, char *out_buf); static int debug_sprintf_format_fn(debug_info_t * id, struct debug_view *view, - char *out_buf, debug_sprintf_entry_t *curr_event); + char *out_buf, debug_sprintf_entry_t *curr_event); /* globals */ @@ -119,6 +130,15 @@ struct debug_view debug_level_view = { NULL }; +struct debug_view debug_pages_view = { + "pages", + &debug_prolog_pages_fn, + NULL, + NULL, + &debug_input_pages_fn, + NULL +}; + struct debug_view debug_flush_view = { "flush", NULL, @@ -149,98 +169,161 @@ DECLARE_MUTEX(debug_lock); static int initialized; static struct file_operations debug_file_ops = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, .read = debug_output, - .write = debug_input, + .write = debug_input, .open = debug_open, .release = debug_close, }; -static struct proc_dir_entry *debug_proc_root_entry; +static struct dentry *debug_debugfs_root_entry; /* functions */ /* + * debug_areas_alloc + * - Debug areas are implemented as a threedimensonal array: + * areas[areanumber][pagenumber][pageoffset] + */ + +static debug_entry_t*** +debug_areas_alloc(int pages_per_area, int nr_areas) +{ + debug_entry_t*** areas; + int i,j; + + areas = (debug_entry_t ***) kmalloc(nr_areas * + sizeof(debug_entry_t**), + GFP_KERNEL); + if (!areas) + goto fail_malloc_areas; + for (i = 0; i < nr_areas; i++) { + areas[i] = (debug_entry_t**) kmalloc(pages_per_area * + sizeof(debug_entry_t*),GFP_KERNEL); + if (!areas[i]) { + goto fail_malloc_areas2; + } + for(j = 0; j < pages_per_area; j++) { + areas[i][j] = (debug_entry_t*)kmalloc(PAGE_SIZE, + GFP_KERNEL); + if(!areas[i][j]) { + for(j--; j >=0 ; j--) { + kfree(areas[i][j]); + } + kfree(areas[i]); + goto fail_malloc_areas2; + } else { + memset(areas[i][j],0,PAGE_SIZE); + } + } + } + return areas; + +fail_malloc_areas2: + for(i--; i >= 0; i--){ + for(j=0; j < pages_per_area;j++){ + kfree(areas[i][j]); + } + kfree(areas[i]); + } + kfree(areas); +fail_malloc_areas: + return NULL; + +} + + +/* * debug_info_alloc * - alloc new debug-info */ -static debug_info_t* debug_info_alloc(char *name, int page_order, - int nr_areas, int buf_size) +static debug_info_t* +debug_info_alloc(char *name, int pages_per_area, int nr_areas, int buf_size, + int level, int mode) { debug_info_t* rc; - int i; /* alloc everything */ - rc = (debug_info_t*) kmalloc(sizeof(debug_info_t), GFP_ATOMIC); + rc = (debug_info_t*) kmalloc(sizeof(debug_info_t), GFP_KERNEL); if(!rc) goto fail_malloc_rc; - rc->active_entry = (int*)kmalloc(nr_areas * sizeof(int), GFP_ATOMIC); - if(!rc->active_entry) - goto fail_malloc_active_entry; - memset(rc->active_entry, 0, nr_areas * sizeof(int)); - rc->areas = (debug_entry_t **) kmalloc(nr_areas * - sizeof(debug_entry_t *), - GFP_ATOMIC); - if (!rc->areas) - goto fail_malloc_areas; - for (i = 0; i < nr_areas; i++) { - rc->areas[i] = (debug_entry_t *) __get_free_pages(GFP_ATOMIC, - page_order); - if (!rc->areas[i]) { - for (i--; i >= 0; i--) { - free_pages((unsigned long) rc->areas[i], - page_order); - } - goto fail_malloc_areas2; - } else { - memset(rc->areas[i], 0, PAGE_SIZE << page_order); - } + rc->active_entries = (int*)kmalloc(nr_areas * sizeof(int), GFP_KERNEL); + if(!rc->active_entries) + goto fail_malloc_active_entries; + memset(rc->active_entries, 0, nr_areas * sizeof(int)); + rc->active_pages = (int*)kmalloc(nr_areas * sizeof(int), GFP_KERNEL); + if(!rc->active_pages) + goto fail_malloc_active_pages; + memset(rc->active_pages, 0, nr_areas * sizeof(int)); + if((mode == ALL_AREAS) && (pages_per_area != 0)){ + rc->areas = debug_areas_alloc(pages_per_area, nr_areas); + if(!rc->areas) + goto fail_malloc_areas; + } else { + rc->areas = NULL; } /* initialize members */ spin_lock_init(&rc->lock); - rc->page_order = page_order; - rc->nr_areas = nr_areas; - rc->active_area = 0; - rc->level = DEBUG_DEFAULT_LEVEL; - rc->buf_size = buf_size; - rc->entry_size = sizeof(debug_entry_t) + buf_size; - strlcpy(rc->name, name, sizeof(rc->name)); + rc->pages_per_area = pages_per_area; + rc->nr_areas = nr_areas; + rc->active_area = 0; + rc->level = level; + rc->buf_size = buf_size; + rc->entry_size = sizeof(debug_entry_t) + buf_size; + strlcpy(rc->name, name, sizeof(rc->name)-1); memset(rc->views, 0, DEBUG_MAX_VIEWS * sizeof(struct debug_view *)); -#ifdef CONFIG_PROC_FS - memset(rc->proc_entries, 0 ,DEBUG_MAX_VIEWS * - sizeof(struct proc_dir_entry*)); -#endif /* CONFIG_PROC_FS */ + memset(rc->debugfs_entries, 0 ,DEBUG_MAX_VIEWS * + sizeof(struct dentry*)); atomic_set(&(rc->ref_count), 0); return rc; -fail_malloc_areas2: - kfree(rc->areas); fail_malloc_areas: - kfree(rc->active_entry); -fail_malloc_active_entry: + kfree(rc->active_pages); +fail_malloc_active_pages: + kfree(rc->active_entries); +fail_malloc_active_entries: kfree(rc); fail_malloc_rc: return NULL; } /* - * debug_info_free - * - free memory debug-info + * debug_areas_free + * - free all debug areas */ -static void debug_info_free(debug_info_t* db_info){ - int i; +static void +debug_areas_free(debug_info_t* db_info) +{ + int i,j; + + if(!db_info->areas) + return; for (i = 0; i < db_info->nr_areas; i++) { - free_pages((unsigned long) db_info->areas[i], - db_info->page_order); + for(j = 0; j < db_info->pages_per_area; j++) { + kfree(db_info->areas[i][j]); + } + kfree(db_info->areas[i]); } kfree(db_info->areas); - kfree(db_info->active_entry); + db_info->areas = NULL; +} + +/* + * debug_info_free + * - free memory debug-info + */ + +static void +debug_info_free(debug_info_t* db_info){ + debug_areas_free(db_info); + kfree(db_info->active_entries); + kfree(db_info->active_pages); kfree(db_info); } @@ -249,21 +332,22 @@ static void debug_info_free(debug_info_t* db_info){ * - create new debug-info */ -static debug_info_t* debug_info_create(char *name, int page_order, - int nr_areas, int buf_size) +static debug_info_t* +debug_info_create(char *name, int pages_per_area, int nr_areas, int buf_size) { debug_info_t* rc; - rc = debug_info_alloc(name, page_order, nr_areas, buf_size); + rc = debug_info_alloc(name, pages_per_area, nr_areas, buf_size, + DEBUG_DEFAULT_LEVEL, ALL_AREAS); if(!rc) goto out; - - /* create proc rood directory */ - rc->proc_root_entry = proc_mkdir(rc->name, debug_proc_root_entry); + /* create root directory */ + rc->debugfs_root_entry = debugfs_create_dir(rc->name, + debug_debugfs_root_entry); /* append new element to linked list */ - if (debug_area_first == NULL) { + if (!debug_area_first) { /* first element in list */ debug_area_first = rc; rc->prev = NULL; @@ -285,17 +369,21 @@ out: * - copy debug-info */ -static debug_info_t* debug_info_copy(debug_info_t* in) +static debug_info_t* +debug_info_copy(debug_info_t* in, int mode) { - int i; + int i,j; debug_info_t* rc; - rc = debug_info_alloc(in->name, in->page_order, - in->nr_areas, in->buf_size); - if(!rc) + + rc = debug_info_alloc(in->name, in->pages_per_area, in->nr_areas, + in->buf_size, in->level, mode); + if(!rc || (mode == NO_AREAS)) goto out; for(i = 0; i < in->nr_areas; i++){ - memcpy(rc->areas[i],in->areas[i], PAGE_SIZE << in->page_order); + for(j = 0; j < in->pages_per_area; j++) { + memcpy(rc->areas[i][j], in->areas[i][j],PAGE_SIZE); + } } out: return rc; @@ -306,7 +394,8 @@ out: * - increments reference count for debug-info */ -static void debug_info_get(debug_info_t * db_info) +static void +debug_info_get(debug_info_t * db_info) { if (db_info) atomic_inc(&db_info->ref_count); @@ -317,29 +406,20 @@ static void debug_info_get(debug_info_t * db_info) * - decreases reference count for debug-info and frees it if necessary */ -static void debug_info_put(debug_info_t *db_info) +static void +debug_info_put(debug_info_t *db_info) { int i; if (!db_info) return; if (atomic_dec_and_test(&db_info->ref_count)) { -#ifdef DEBUG - printk(KERN_INFO "debug: freeing debug area %p (%s)\n", - db_info, db_info->name); -#endif for (i = 0; i < DEBUG_MAX_VIEWS; i++) { - if (db_info->views[i] == NULL) + if (!db_info->views[i]) continue; -#ifdef CONFIG_PROC_FS - remove_proc_entry(db_info->proc_entries[i]->name, - db_info->proc_root_entry); -#endif + debugfs_remove(db_info->debugfs_entries[i]); } -#ifdef CONFIG_PROC_FS - remove_proc_entry(db_info->proc_root_entry->name, - debug_proc_root_entry); -#endif + debugfs_remove(db_info->debugfs_root_entry); if(db_info == debug_area_first) debug_area_first = db_info->next; if(db_info == debug_area_last) @@ -355,9 +435,9 @@ static void debug_info_put(debug_info_t *db_info) * - format one debug entry and return size of formated data */ -static int debug_format_entry(file_private_info_t *p_info) +static int +debug_format_entry(file_private_info_t *p_info) { - debug_info_t *id_org = p_info->debug_info_org; debug_info_t *id_snap = p_info->debug_info_snap; struct debug_view *view = p_info->view; debug_entry_t *act_entry; @@ -365,22 +445,23 @@ static int debug_format_entry(file_private_info_t *p_info) if(p_info->act_entry == DEBUG_PROLOG_ENTRY){ /* print prolog */ if (view->prolog_proc) - len += view->prolog_proc(id_org, view,p_info->temp_buf); + len += view->prolog_proc(id_snap,view,p_info->temp_buf); goto out; } - - act_entry = (debug_entry_t *) ((char*)id_snap->areas[p_info->act_area] + - p_info->act_entry); + if (!id_snap->areas) /* this is true, if we have a prolog only view */ + goto out; /* or if 'pages_per_area' is 0 */ + act_entry = (debug_entry_t *) ((char*)id_snap->areas[p_info->act_area] + [p_info->act_page] + p_info->act_entry); if (act_entry->id.stck == 0LL) goto out; /* empty entry */ if (view->header_proc) - len += view->header_proc(id_org, view, p_info->act_area, + len += view->header_proc(id_snap, view, p_info->act_area, act_entry, p_info->temp_buf + len); if (view->format_proc) - len += view->format_proc(id_org, view, p_info->temp_buf + len, + len += view->format_proc(id_snap, view, p_info->temp_buf + len, DEBUG_DATA(act_entry)); - out: +out: return len; } @@ -389,20 +470,30 @@ static int debug_format_entry(file_private_info_t *p_info) * - goto next entry in p_info */ -extern inline int debug_next_entry(file_private_info_t *p_info) +extern inline int +debug_next_entry(file_private_info_t *p_info) { - debug_info_t *id = p_info->debug_info_snap; + debug_info_t *id; + + id = p_info->debug_info_snap; if(p_info->act_entry == DEBUG_PROLOG_ENTRY){ p_info->act_entry = 0; + p_info->act_page = 0; goto out; } - if ((p_info->act_entry += id->entry_size) - > ((PAGE_SIZE << (id->page_order)) - - id->entry_size)){ - - /* next area */ + if(!id->areas) + return 1; + p_info->act_entry += id->entry_size; + /* switch to next page, if we reached the end of the page */ + if (p_info->act_entry > (PAGE_SIZE - id->entry_size)){ + /* next page */ p_info->act_entry = 0; - p_info->act_area++; + p_info->act_page += 1; + if((p_info->act_page % id->pages_per_area) == 0) { + /* next area */ + p_info->act_area++; + p_info->act_page=0; + } if(p_info->act_area >= id->nr_areas) return 1; } @@ -416,13 +507,14 @@ out: * - copies formated debug entries to the user buffer */ -static ssize_t debug_output(struct file *file, /* file descriptor */ - char __user *user_buf, /* user buffer */ - size_t len, /* length of buffer */ - loff_t *offset) /* offset in the file */ +static ssize_t +debug_output(struct file *file, /* file descriptor */ + char __user *user_buf, /* user buffer */ + size_t len, /* length of buffer */ + loff_t *offset) /* offset in the file */ { size_t count = 0; - size_t entry_offset, size = 0; + size_t entry_offset; file_private_info_t *p_info; p_info = ((file_private_info_t *) file->private_data); @@ -430,27 +522,33 @@ static ssize_t debug_output(struct file *file, /* file descriptor */ return -EPIPE; if(p_info->act_area >= p_info->debug_info_snap->nr_areas) return 0; - entry_offset = p_info->act_entry_offset; - while(count < len){ - size = debug_format_entry(p_info); - size = min((len - count), (size - entry_offset)); - - if(size){ - if (copy_to_user(user_buf + count, - p_info->temp_buf + entry_offset, size)) - return -EFAULT; + int formatted_line_size; + int formatted_line_residue; + int user_buf_residue; + size_t copy_size; + + formatted_line_size = debug_format_entry(p_info); + formatted_line_residue = formatted_line_size - entry_offset; + user_buf_residue = len-count; + copy_size = min(user_buf_residue, formatted_line_residue); + if(copy_size){ + if (copy_to_user(user_buf + count, p_info->temp_buf + + entry_offset, copy_size)) + return -EFAULT; + count += copy_size; + entry_offset += copy_size; } - count += size; - entry_offset = 0; - if(count != len) - if(debug_next_entry(p_info)) + if(copy_size == formatted_line_residue){ + entry_offset = 0; + if(debug_next_entry(p_info)) goto out; + } } out: p_info->offset = *offset + count; - p_info->act_entry_offset = size; + p_info->act_entry_offset = entry_offset; *offset = p_info->offset; return count; } @@ -461,9 +559,9 @@ out: * - calls input function of view */ -static ssize_t debug_input(struct file *file, - const char __user *user_buf, size_t length, - loff_t *offset) +static ssize_t +debug_input(struct file *file, const char __user *user_buf, size_t length, + loff_t *offset) { int rc = 0; file_private_info_t *p_info; @@ -487,26 +585,23 @@ static ssize_t debug_input(struct file *file, * handle */ -static int debug_open(struct inode *inode, struct file *file) +static int +debug_open(struct inode *inode, struct file *file) { int i = 0, rc = 0; file_private_info_t *p_info; debug_info_t *debug_info, *debug_info_snapshot; -#ifdef DEBUG - printk("debug_open\n"); -#endif down(&debug_lock); /* find debug log and view */ - debug_info = debug_area_first; while(debug_info != NULL){ for (i = 0; i < DEBUG_MAX_VIEWS; i++) { - if (debug_info->views[i] == NULL) + if (!debug_info->views[i]) continue; - else if (debug_info->proc_entries[i] == - PDE(file->f_dentry->d_inode)) { + else if (debug_info->debugfs_entries[i] == + file->f_dentry) { goto found; /* found view ! */ } } @@ -516,41 +611,42 @@ static int debug_open(struct inode *inode, struct file *file) rc = -EINVAL; goto out; - found: +found: - /* make snapshot of current debug areas to get it consistent */ + /* Make snapshot of current debug areas to get it consistent. */ + /* To copy all the areas is only needed, if we have a view which */ + /* formats the debug areas. */ - debug_info_snapshot = debug_info_copy(debug_info); + if(!debug_info->views[i]->format_proc && + !debug_info->views[i]->header_proc){ + debug_info_snapshot = debug_info_copy(debug_info, NO_AREAS); + } else { + debug_info_snapshot = debug_info_copy(debug_info, ALL_AREAS); + } if(!debug_info_snapshot){ -#ifdef DEBUG - printk(KERN_ERR "debug_open: debug_info_copy failed (out of mem)\n"); -#endif rc = -ENOMEM; goto out; } - - if ((file->private_data = - kmalloc(sizeof(file_private_info_t), GFP_ATOMIC)) == 0) { -#ifdef DEBUG - printk(KERN_ERR "debug_open: kmalloc failed\n"); -#endif - debug_info_free(debug_info_snapshot); + p_info = (file_private_info_t *) kmalloc(sizeof(file_private_info_t), + GFP_KERNEL); + if(!p_info){ + if(debug_info_snapshot) + debug_info_free(debug_info_snapshot); rc = -ENOMEM; goto out; } - p_info = (file_private_info_t *) file->private_data; p_info->offset = 0; p_info->debug_info_snap = debug_info_snapshot; p_info->debug_info_org = debug_info; p_info->view = debug_info->views[i]; p_info->act_area = 0; + p_info->act_page = 0; p_info->act_entry = DEBUG_PROLOG_ENTRY; p_info->act_entry_offset = 0; - + file->private_data = p_info; debug_info_get(debug_info); - - out: +out: up(&debug_lock); return rc; } @@ -561,14 +657,13 @@ static int debug_open(struct inode *inode, struct file *file) * - deletes private_data area of the file handle */ -static int debug_close(struct inode *inode, struct file *file) +static int +debug_close(struct inode *inode, struct file *file) { file_private_info_t *p_info; -#ifdef DEBUG - printk("debug_close\n"); -#endif p_info = (file_private_info_t *) file->private_data; - debug_info_free(p_info->debug_info_snap); + if(p_info->debug_info_snap) + debug_info_free(p_info->debug_info_snap); debug_info_put(p_info->debug_info_org); kfree(file->private_data); return 0; /* success */ @@ -580,8 +675,8 @@ static int debug_close(struct inode *inode, struct file *file) * - returns handle for debug area */ -debug_info_t *debug_register - (char *name, int page_order, int nr_areas, int buf_size) +debug_info_t* +debug_register (char *name, int pages_per_area, int nr_areas, int buf_size) { debug_info_t *rc = NULL; @@ -591,18 +686,14 @@ debug_info_t *debug_register /* create new debug_info */ - rc = debug_info_create(name, page_order, nr_areas, buf_size); + rc = debug_info_create(name, pages_per_area, nr_areas, buf_size); if(!rc) goto out; debug_register_view(rc, &debug_level_view); debug_register_view(rc, &debug_flush_view); -#ifdef DEBUG - printk(KERN_INFO - "debug: reserved %d areas of %d pages for debugging %s\n", - nr_areas, 1 << page_order, rc->name); -#endif - out: - if (rc == NULL){ + debug_register_view(rc, &debug_pages_view); +out: + if (!rc){ printk(KERN_ERR "debug: debug_register failed for %s\n",name); } up(&debug_lock); @@ -614,27 +705,65 @@ debug_info_t *debug_register * - give back debug area */ -void debug_unregister(debug_info_t * id) +void +debug_unregister(debug_info_t * id) { if (!id) goto out; down(&debug_lock); -#ifdef DEBUG - printk(KERN_INFO "debug: unregistering %s\n", id->name); -#endif debug_info_put(id); up(&debug_lock); - out: +out: return; } /* + * debug_set_size: + * - set area size (number of pages) and number of areas + */ +static int +debug_set_size(debug_info_t* id, int nr_areas, int pages_per_area) +{ + unsigned long flags; + debug_entry_t *** new_areas; + int rc=0; + + if(!id || (nr_areas <= 0) || (pages_per_area < 0)) + return -EINVAL; + if(pages_per_area > 0){ + new_areas = debug_areas_alloc(pages_per_area, nr_areas); + if(!new_areas) { + printk(KERN_WARNING "debug: could not allocate memory "\ + "for pagenumber: %i\n",pages_per_area); + rc = -ENOMEM; + goto out; + } + } else { + new_areas = NULL; + } + spin_lock_irqsave(&id->lock,flags); + debug_areas_free(id); + id->areas = new_areas; + id->nr_areas = nr_areas; + id->pages_per_area = pages_per_area; + id->active_area = 0; + memset(id->active_entries,0,sizeof(int)*id->nr_areas); + memset(id->active_pages, 0, sizeof(int)*id->nr_areas); + spin_unlock_irqrestore(&id->lock,flags); + printk(KERN_INFO "debug: %s: set new size (%i pages)\n"\ + ,id->name, pages_per_area); +out: + return rc; +} + +/* * debug_set_level: * - set actual debug level */ -void debug_set_level(debug_info_t* id, int new_level) +void +debug_set_level(debug_info_t* id, int new_level) { unsigned long flags; if(!id) @@ -649,10 +778,6 @@ void debug_set_level(debug_info_t* id, int new_level) id->name, new_level, 0, DEBUG_MAX_LEVEL); } else { id->level = new_level; -#ifdef DEBUG - printk(KERN_INFO - "debug: %s: new level %i\n",id->name,id->level); -#endif } spin_unlock_irqrestore(&id->lock,flags); } @@ -663,11 +788,16 @@ void debug_set_level(debug_info_t* id, int new_level) * - set active entry to next in the ring buffer */ -extern inline void proceed_active_entry(debug_info_t * id) +extern inline void +proceed_active_entry(debug_info_t * id) { - if ((id->active_entry[id->active_area] += id->entry_size) - > ((PAGE_SIZE << (id->page_order)) - id->entry_size)) - id->active_entry[id->active_area] = 0; + if ((id->active_entries[id->active_area] += id->entry_size) + > (PAGE_SIZE - id->entry_size)){ + id->active_entries[id->active_area] = 0; + id->active_pages[id->active_area] = + (id->active_pages[id->active_area] + 1) % + id->pages_per_area; + } } /* @@ -675,7 +805,8 @@ extern inline void proceed_active_entry(debug_info_t * id) * - set active area to next in the ring buffer */ -extern inline void proceed_active_area(debug_info_t * id) +extern inline void +proceed_active_area(debug_info_t * id) { id->active_area++; id->active_area = id->active_area % id->nr_areas; @@ -685,10 +816,12 @@ extern inline void proceed_active_area(debug_info_t * id) * get_active_entry: */ -extern inline debug_entry_t *get_active_entry(debug_info_t * id) +extern inline debug_entry_t* +get_active_entry(debug_info_t * id) { - return (debug_entry_t *) ((char *) id->areas[id->active_area] + - id->active_entry[id->active_area]); + return (debug_entry_t *) (((char *) id->areas[id->active_area] + [id->active_pages[id->active_area]]) + + id->active_entries[id->active_area]); } /* @@ -696,8 +829,9 @@ extern inline debug_entry_t *get_active_entry(debug_info_t * id) * - set timestamp, caller address, cpu number etc. */ -extern inline void debug_finish_entry(debug_info_t * id, debug_entry_t* active, - int level, int exception) +extern inline void +debug_finish_entry(debug_info_t * id, debug_entry_t* active, int level, + int exception) { STCK(active->id.stck); active->id.fields.cpuid = smp_processor_id(); @@ -721,7 +855,8 @@ static int debug_active=1; * always allow read, allow write only if debug_stoppable is set or * if debug_active is already off */ -static int s390dbf_procactive(ctl_table *table, int write, struct file *filp, +static int +s390dbf_procactive(ctl_table *table, int write, struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos) { if (!write || debug_stoppable || !debug_active) @@ -766,7 +901,8 @@ static struct ctl_table s390dbf_dir_table[] = { struct ctl_table_header *s390dbf_sysctl_header; -void debug_stop_all(void) +void +debug_stop_all(void) { if (debug_stoppable) debug_active = 0; @@ -778,13 +914,13 @@ void debug_stop_all(void) * - write debug entry with given size */ -debug_entry_t *debug_event_common(debug_info_t * id, int level, const void *buf, - int len) +debug_entry_t* +debug_event_common(debug_info_t * id, int level, const void *buf, int len) { unsigned long flags; debug_entry_t *active; - if (!debug_active) + if (!debug_active || !id->areas) return NULL; spin_lock_irqsave(&id->lock, flags); active = get_active_entry(id); @@ -801,13 +937,13 @@ debug_entry_t *debug_event_common(debug_info_t * id, int level, const void *buf, * - write debug entry with given size and switch to next debug area */ -debug_entry_t *debug_exception_common(debug_info_t * id, int level, - const void *buf, int len) +debug_entry_t +*debug_exception_common(debug_info_t * id, int level, const void *buf, int len) { unsigned long flags; debug_entry_t *active; - if (!debug_active) + if (!debug_active || !id->areas) return NULL; spin_lock_irqsave(&id->lock, flags); active = get_active_entry(id); @@ -823,7 +959,8 @@ debug_entry_t *debug_exception_common(debug_info_t * id, int level, * counts arguments in format string for sprintf view */ -extern inline int debug_count_numargs(char *string) +extern inline int +debug_count_numargs(char *string) { int numargs=0; @@ -838,8 +975,8 @@ extern inline int debug_count_numargs(char *string) * debug_sprintf_event: */ -debug_entry_t *debug_sprintf_event(debug_info_t* id, - int level,char *string,...) +debug_entry_t* +debug_sprintf_event(debug_info_t* id, int level,char *string,...) { va_list ap; int numargs,idx; @@ -849,7 +986,7 @@ debug_entry_t *debug_sprintf_event(debug_info_t* id, if((!id) || (level > id->level)) return NULL; - if (!debug_active) + if (!debug_active || !id->areas) return NULL; numargs=debug_count_numargs(string); @@ -871,8 +1008,8 @@ debug_entry_t *debug_sprintf_event(debug_info_t* id, * debug_sprintf_exception: */ -debug_entry_t *debug_sprintf_exception(debug_info_t* id, - int level,char *string,...) +debug_entry_t* +debug_sprintf_exception(debug_info_t* id, int level,char *string,...) { va_list ap; int numargs,idx; @@ -882,7 +1019,7 @@ debug_entry_t *debug_sprintf_exception(debug_info_t* id, if((!id) || (level > id->level)) return NULL; - if (!debug_active) + if (!debug_active || !id->areas) return NULL; numargs=debug_count_numargs(string); @@ -906,15 +1043,14 @@ debug_entry_t *debug_sprintf_exception(debug_info_t* id, * - is called exactly once to initialize the debug feature */ -static int __init debug_init(void) +static int +__init debug_init(void) { int rc = 0; s390dbf_sysctl_header = register_sysctl_table(s390dbf_dir_table, 1); down(&debug_lock); -#ifdef CONFIG_PROC_FS - debug_proc_root_entry = proc_mkdir(DEBUG_DIR_ROOT, NULL); -#endif /* CONFIG_PROC_FS */ + debug_debugfs_root_entry = debugfs_create_dir(DEBUG_DIR_ROOT,NULL); printk(KERN_INFO "debug: Initialization complete\n"); initialized = 1; up(&debug_lock); @@ -926,13 +1062,14 @@ static int __init debug_init(void) * debug_register_view: */ -int debug_register_view(debug_info_t * id, struct debug_view *view) +int +debug_register_view(debug_info_t * id, struct debug_view *view) { int rc = 0; int i; unsigned long flags; mode_t mode = S_IFREG; - struct proc_dir_entry *pde; + struct dentry *pde; if (!id) goto out; @@ -940,16 +1077,17 @@ int debug_register_view(debug_info_t * id, struct debug_view *view) mode |= S_IRUSR; if (view->input_proc) mode |= S_IWUSR; - pde = create_proc_entry(view->name, mode, id->proc_root_entry); + pde = debugfs_create_file(view->name, mode, id->debugfs_root_entry, + NULL, &debug_file_ops); if (!pde){ - printk(KERN_WARNING "debug: create_proc_entry() failed! Cannot register view %s/%s\n", id->name,view->name); + printk(KERN_WARNING "debug: debugfs_create_file() failed!"\ + " Cannot register view %s/%s\n", id->name,view->name); rc = -1; goto out; } - spin_lock_irqsave(&id->lock, flags); for (i = 0; i < DEBUG_MAX_VIEWS; i++) { - if (id->views[i] == NULL) + if (!id->views[i]) break; } if (i == DEBUG_MAX_VIEWS) { @@ -957,16 +1095,14 @@ int debug_register_view(debug_info_t * id, struct debug_view *view) id->name,view->name); printk(KERN_WARNING "debug: maximum number of views reached (%i)!\n", i); - remove_proc_entry(pde->name, id->proc_root_entry); + debugfs_remove(pde); rc = -1; - } - else { + } else { id->views[i] = view; - pde->proc_fops = &debug_file_ops; - id->proc_entries[i] = pde; + id->debugfs_entries[i] = pde; } spin_unlock_irqrestore(&id->lock, flags); - out: +out: return rc; } @@ -974,7 +1110,8 @@ int debug_register_view(debug_info_t * id, struct debug_view *view) * debug_unregister_view: */ -int debug_unregister_view(debug_info_t * id, struct debug_view *view) +int +debug_unregister_view(debug_info_t * id, struct debug_view *view) { int rc = 0; int i; @@ -990,15 +1127,46 @@ int debug_unregister_view(debug_info_t * id, struct debug_view *view) if (i == DEBUG_MAX_VIEWS) rc = -1; else { -#ifdef CONFIG_PROC_FS - remove_proc_entry(id->proc_entries[i]->name, - id->proc_root_entry); -#endif + debugfs_remove(id->debugfs_entries[i]); id->views[i] = NULL; rc = 0; } spin_unlock_irqrestore(&id->lock, flags); - out: +out: + return rc; +} + +static inline char * +debug_get_user_string(const char __user *user_buf, size_t user_len) +{ + char* buffer; + + buffer = kmalloc(user_len + 1, GFP_KERNEL); + if (!buffer) + return ERR_PTR(-ENOMEM); + if (copy_from_user(buffer, user_buf, user_len) != 0) { + kfree(buffer); + return ERR_PTR(-EFAULT); + } + /* got the string, now strip linefeed. */ + if (buffer[user_len - 1] == '\n') + buffer[user_len - 1] = 0; + else + buffer[user_len] = 0; + return buffer; +} + +static inline int +debug_get_uint(char *buf) +{ + int rc; + + for(; isspace(*buf); buf++); + rc = simple_strtoul(buf, &buf, 10); + if(*buf){ + printk("debug: no integer specified!\n"); + rc = -EINVAL; + } return rc; } @@ -1011,13 +1179,69 @@ int debug_unregister_view(debug_info_t * id, struct debug_view *view) * prints out actual debug level */ -static int debug_prolog_level_fn(debug_info_t * id, +static int +debug_prolog_pages_fn(debug_info_t * id, struct debug_view *view, char *out_buf) { + return sprintf(out_buf, "%i\n", id->pages_per_area); +} + +/* + * reads new size (number of pages per debug area) + */ + +static int +debug_input_pages_fn(debug_info_t * id, struct debug_view *view, + struct file *file, const char __user *user_buf, + size_t user_len, loff_t * offset) +{ + char *str; + int rc,new_pages; + + if (user_len > 0x10000) + user_len = 0x10000; + if (*offset != 0){ + rc = -EPIPE; + goto out; + } + str = debug_get_user_string(user_buf,user_len); + if(IS_ERR(str)){ + rc = PTR_ERR(str); + goto out; + } + new_pages = debug_get_uint(str); + if(new_pages < 0){ + rc = -EINVAL; + goto free_str; + } + rc = debug_set_size(id,id->nr_areas, new_pages); + if(rc != 0){ + rc = -EINVAL; + goto free_str; + } + rc = user_len; +free_str: + kfree(str); +out: + *offset += user_len; + return rc; /* number of input characters */ +} + +/* + * prints out actual debug level + */ + +static int +debug_prolog_level_fn(debug_info_t * id, struct debug_view *view, char *out_buf) +{ int rc = 0; - if(id->level == -1) rc = sprintf(out_buf,"-\n"); - else rc = sprintf(out_buf, "%i\n", id->level); + if(id->level == DEBUG_OFF_LEVEL) { + rc = sprintf(out_buf,"-\n"); + } + else { + rc = sprintf(out_buf, "%i\n", id->level); + } return rc; } @@ -1025,30 +1249,43 @@ static int debug_prolog_level_fn(debug_info_t * id, * reads new debug level */ -static int debug_input_level_fn(debug_info_t * id, struct debug_view *view, - struct file *file, const char __user *user_buf, - size_t in_buf_size, loff_t * offset) +static int +debug_input_level_fn(debug_info_t * id, struct debug_view *view, + struct file *file, const char __user *user_buf, + size_t user_len, loff_t * offset) { - char input_buf[1]; - int rc = in_buf_size; + char *str; + int rc,new_level; - if (*offset != 0) + if (user_len > 0x10000) + user_len = 0x10000; + if (*offset != 0){ + rc = -EPIPE; goto out; - if (copy_from_user(input_buf, user_buf, 1)){ - rc = -EFAULT; + } + str = debug_get_user_string(user_buf,user_len); + if(IS_ERR(str)){ + rc = PTR_ERR(str); goto out; } - if (isdigit(input_buf[0])) { - int new_level = ((int) input_buf[0] - (int) '0'); - debug_set_level(id, new_level); - } else if(input_buf[0] == '-') { + if(str[0] == '-'){ debug_set_level(id, DEBUG_OFF_LEVEL); + rc = user_len; + goto free_str; } else { - printk(KERN_INFO "debug: level `%c` is not valid\n", - input_buf[0]); + new_level = debug_get_uint(str); } - out: - *offset += in_buf_size; + if(new_level < 0) { + printk(KERN_INFO "debug: level `%s` is not valid\n", str); + rc = -EINVAL; + } else { + debug_set_level(id, new_level); + rc = user_len; + } +free_str: + kfree(str); +out: + *offset += user_len; return rc; /* number of input characters */ } @@ -1057,29 +1294,36 @@ static int debug_input_level_fn(debug_info_t * id, struct debug_view *view, * flushes debug areas */ -void debug_flush(debug_info_t* id, int area) +void +debug_flush(debug_info_t* id, int area) { unsigned long flags; - int i; + int i,j; - if(!id) + if(!id || !id->areas) return; spin_lock_irqsave(&id->lock,flags); if(area == DEBUG_FLUSH_ALL){ id->active_area = 0; - memset(id->active_entry, 0, id->nr_areas * sizeof(int)); - for (i = 0; i < id->nr_areas; i++) - memset(id->areas[i], 0, PAGE_SIZE << id->page_order); + memset(id->active_entries, 0, id->nr_areas * sizeof(int)); + for (i = 0; i < id->nr_areas; i++) { + id->active_pages[i] = 0; + for(j = 0; j < id->pages_per_area; j++) { + memset(id->areas[i][j], 0, PAGE_SIZE); + } + } printk(KERN_INFO "debug: %s: all areas flushed\n",id->name); } else if(area >= 0 && area < id->nr_areas) { - id->active_entry[area] = 0; - memset(id->areas[area], 0, PAGE_SIZE << id->page_order); - printk(KERN_INFO - "debug: %s: area %i has been flushed\n", + id->active_entries[area] = 0; + id->active_pages[area] = 0; + for(i = 0; i < id->pages_per_area; i++) { + memset(id->areas[area][i],0,PAGE_SIZE); + } + printk(KERN_INFO "debug: %s: area %i has been flushed\n", id->name, area); } else { printk(KERN_INFO - "debug: %s: area %i cannot be flushed (range: %i - %i)\n", + "debug: %s: area %i cannot be flushed (range: %i - %i)\n", id->name, area, 0, id->nr_areas-1); } spin_unlock_irqrestore(&id->lock,flags); @@ -1089,15 +1333,20 @@ void debug_flush(debug_info_t* id, int area) * view function: flushes debug areas */ -static int debug_input_flush_fn(debug_info_t * id, struct debug_view *view, - struct file *file, const char __user *user_buf, - size_t in_buf_size, loff_t * offset) +static int +debug_input_flush_fn(debug_info_t * id, struct debug_view *view, + struct file *file, const char __user *user_buf, + size_t user_len, loff_t * offset) { char input_buf[1]; - int rc = in_buf_size; - - if (*offset != 0) + int rc = user_len; + + if (user_len > 0x10000) + user_len = 0x10000; + if (*offset != 0){ + rc = -EPIPE; goto out; + } if (copy_from_user(input_buf, user_buf, 1)){ rc = -EFAULT; goto out; @@ -1114,8 +1363,8 @@ static int debug_input_flush_fn(debug_info_t * id, struct debug_view *view, printk(KERN_INFO "debug: area `%c` is not valid\n", input_buf[0]); - out: - *offset += in_buf_size; +out: + *offset += user_len; return rc; /* number of input characters */ } @@ -1123,8 +1372,9 @@ static int debug_input_flush_fn(debug_info_t * id, struct debug_view *view, * prints debug header in raw format */ -int debug_raw_header_fn(debug_info_t * id, struct debug_view *view, - int area, debug_entry_t * entry, char *out_buf) +static int +debug_raw_header_fn(debug_info_t * id, struct debug_view *view, + int area, debug_entry_t * entry, char *out_buf) { int rc; @@ -1137,7 +1387,8 @@ int debug_raw_header_fn(debug_info_t * id, struct debug_view *view, * prints debug data in raw format */ -static int debug_raw_format_fn(debug_info_t * id, struct debug_view *view, +static int +debug_raw_format_fn(debug_info_t * id, struct debug_view *view, char *out_buf, const char *in_buf) { int rc; @@ -1151,8 +1402,9 @@ static int debug_raw_format_fn(debug_info_t * id, struct debug_view *view, * prints debug data in hex/ascii format */ -static int debug_hex_ascii_format_fn(debug_info_t * id, struct debug_view *view, - char *out_buf, const char *in_buf) +static int +debug_hex_ascii_format_fn(debug_info_t * id, struct debug_view *view, + char *out_buf, const char *in_buf) { int i, rc = 0; @@ -1176,7 +1428,8 @@ static int debug_hex_ascii_format_fn(debug_info_t * id, struct debug_view *view, * prints header for debug entry */ -int debug_dflt_header_fn(debug_info_t * id, struct debug_view *view, +int +debug_dflt_header_fn(debug_info_t * id, struct debug_view *view, int area, debug_entry_t * entry, char *out_buf) { struct timeval time_val; @@ -1210,8 +1463,9 @@ int debug_dflt_header_fn(debug_info_t * id, struct debug_view *view, #define DEBUG_SPRINTF_MAX_ARGS 10 -int debug_sprintf_format_fn(debug_info_t * id, struct debug_view *view, - char *out_buf, debug_sprintf_entry_t *curr_event) +static int +debug_sprintf_format_fn(debug_info_t * id, struct debug_view *view, + char *out_buf, debug_sprintf_entry_t *curr_event) { int num_longs, num_used_args = 0,i, rc = 0; int index[DEBUG_SPRINTF_MAX_ARGS]; @@ -1251,14 +1505,10 @@ out: /* * clean up module */ -void __exit debug_exit(void) +void +__exit debug_exit(void) { -#ifdef DEBUG - printk("debug_cleanup_module: \n"); -#endif -#ifdef CONFIG_PROC_FS - remove_proc_entry(debug_proc_root_entry->name, NULL); -#endif /* CONFIG_PROC_FS */ + debugfs_remove(debug_debugfs_root_entry); unregister_sysctl_table(s390dbf_sysctl_header); return; } @@ -1266,7 +1516,7 @@ void __exit debug_exit(void) /* * module definitions */ -core_initcall(debug_init); +postcore_initcall(debug_init); module_exit(debug_exit); MODULE_LICENSE("GPL"); diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index c0e09b33febe..1a271b16cb5c 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -7,6 +7,7 @@ * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), * Hartmut Penner (hp@de.ibm.com), * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), + * Heiko Carstens <heiko.carstens@de.ibm.com> */ #include <linux/sys.h> @@ -49,9 +50,9 @@ SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE -_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \ +_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING | \ _TIF_RESTART_SVC | _TIF_SINGLE_STEP ) -_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NEED_RESCHED) +_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING) STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER STACK_SIZE = 1 << STACK_SHIFT @@ -121,7 +122,11 @@ STACK_SIZE = 1 << STACK_SHIFT bz BASED(stack_overflow) 3: #endif -2: s %r15,BASED(.Lc_spsize) # make room for registers & psw +2: + .endm + + .macro CREATE_STACK_FRAME psworg,savearea + s %r15,BASED(.Lc_spsize) # make room for registers & psw mvc SP_PSW(8,%r15),0(%r12) # move user PSW to stack la %r12,\psworg st %r2,SP_ORIG_R2(%r15) # store original content of gpr 2 @@ -161,6 +166,13 @@ __switch_to_base: be __switch_to_noper-__switch_to_base(%r1) # we got away w/o bashing TLB's lctl %c9,%c11,__THREAD_per(%r3) # Nope we didn't __switch_to_noper: + l %r4,__THREAD_info(%r2) # get thread_info of prev + tm __TI_flags+3(%r4),_TIF_MCCK_PENDING # machine check pending? + bz __switch_to_no_mcck-__switch_to_base(%r1) + ni __TI_flags+3(%r4),255-_TIF_MCCK_PENDING # clear flag in prev + l %r4,__THREAD_info(%r3) # get thread_info of next + oi __TI_flags+3(%r4),_TIF_MCCK_PENDING # set it in next +__switch_to_no_mcck: stm %r6,%r15,__SF_GPRS(%r15)# store __switch_to registers of prev task st %r15,__THREAD_ksp(%r2) # store kernel stack to prev->tss.ksp l %r15,__THREAD_ksp(%r3) # load kernel stack from next->tss.ksp @@ -185,6 +197,7 @@ system_call: sysc_saveall: SAVE_ALL_BASE __LC_SAVE_AREA SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1 + CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA lh %r7,0x8a # get svc number from lowcore #ifdef CONFIG_VIRT_CPU_ACCOUNTING sysc_vtime: @@ -234,6 +247,8 @@ sysc_work_loop: # One of the work bits is on. Find out which one. # sysc_work: + tm __TI_flags+3(%r9),_TIF_MCCK_PENDING + bo BASED(sysc_mcck_pending) tm __TI_flags+3(%r9),_TIF_NEED_RESCHED bo BASED(sysc_reschedule) tm __TI_flags+3(%r9),_TIF_SIGPENDING @@ -253,6 +268,14 @@ sysc_reschedule: br %r1 # call scheduler # +# _TIF_MCCK_PENDING is set, call handler +# +sysc_mcck_pending: + l %r1,BASED(.Ls390_handle_mcck) + la %r14,BASED(sysc_work_loop) + br %r1 # TIF bit will be cleared by handler + +# # _TIF_SIGPENDING is set, call do_signal # sysc_sigpending: @@ -430,6 +453,7 @@ pgm_check_handler: tm __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception bnz BASED(pgm_per) # got per exception -> special case SAVE_ALL __LC_PGM_OLD_PSW,__LC_SAVE_AREA,1 + CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA #ifdef CONFIG_VIRT_CPU_ACCOUNTING tm SP_PSW+1(%r15),0x01 # interrupting from user ? bz BASED(pgm_no_vtime) @@ -468,6 +492,7 @@ pgm_per: # pgm_per_std: SAVE_ALL __LC_PGM_OLD_PSW,__LC_SAVE_AREA,1 + CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA #ifdef CONFIG_VIRT_CPU_ACCOUNTING tm SP_PSW+1(%r15),0x01 # interrupting from user ? bz BASED(pgm_no_vtime2) @@ -493,6 +518,7 @@ pgm_no_vtime2: # pgm_svcper: SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1 + CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA #ifdef CONFIG_VIRT_CPU_ACCOUNTING tm SP_PSW+1(%r15),0x01 # interrupting from user ? bz BASED(pgm_no_vtime3) @@ -521,6 +547,7 @@ io_int_handler: stck __LC_INT_CLOCK SAVE_ALL_BASE __LC_SAVE_AREA+16 SAVE_ALL __LC_IO_OLD_PSW,__LC_SAVE_AREA+16,0 + CREATE_STACK_FRAME __LC_IO_OLD_PSW,__LC_SAVE_AREA+16 #ifdef CONFIG_VIRT_CPU_ACCOUNTING tm SP_PSW+1(%r15),0x01 # interrupting from user ? bz BASED(io_no_vtime) @@ -578,9 +605,11 @@ io_work: lr %r15,%r1 # # One of the work bits is on. Find out which one. -# Checked are: _TIF_SIGPENDING and _TIF_NEED_RESCHED +# Checked are: _TIF_SIGPENDING, _TIF_NEED_RESCHED and _TIF_MCCK_PENDING # io_work_loop: + tm __TI_flags+3(%r9),_TIF_MCCK_PENDING + bo BASED(io_mcck_pending) tm __TI_flags+3(%r9),_TIF_NEED_RESCHED bo BASED(io_reschedule) tm __TI_flags+3(%r9),_TIF_SIGPENDING @@ -588,6 +617,14 @@ io_work_loop: b BASED(io_leave) # +# _TIF_MCCK_PENDING is set, call handler +# +io_mcck_pending: + l %r1,BASED(.Ls390_handle_mcck) + l %r14,BASED(io_work_loop) + br %r1 # TIF bit will be cleared by handler + +# # _TIF_NEED_RESCHED is set, call schedule # io_reschedule: @@ -621,6 +658,7 @@ ext_int_handler: stck __LC_INT_CLOCK SAVE_ALL_BASE __LC_SAVE_AREA+16 SAVE_ALL __LC_EXT_OLD_PSW,__LC_SAVE_AREA+16,0 + CREATE_STACK_FRAME __LC_EXT_OLD_PSW,__LC_SAVE_AREA+16 #ifdef CONFIG_VIRT_CPU_ACCOUNTING tm SP_PSW+1(%r15),0x01 # interrupting from user ? bz BASED(ext_no_vtime) @@ -642,19 +680,62 @@ ext_no_vtime: .globl mcck_int_handler mcck_int_handler: - STORE_TIMER __LC_ASYNC_ENTER_TIMER + spt __LC_CPU_TIMER_SAVE_AREA # revalidate cpu timer + lm %r0,%r15,__LC_GPREGS_SAVE_AREA # revalidate gprs SAVE_ALL_BASE __LC_SAVE_AREA+32 - SAVE_ALL __LC_MCK_OLD_PSW,__LC_SAVE_AREA+32,0 + la %r12,__LC_MCK_OLD_PSW + tm __LC_MCCK_CODE,0x80 # system damage? + bo BASED(mcck_int_main) # yes -> rest of mcck code invalid + tm __LC_MCCK_CODE+5,0x02 # stored cpu timer value valid? + bo BASED(0f) + spt __LC_LAST_UPDATE_TIMER # revalidate cpu timer #ifdef CONFIG_VIRT_CPU_ACCOUNTING - tm SP_PSW+1(%r15),0x01 # interrupting from user ? + mvc __LC_ASYNC_ENTER_TIMER(8),__LC_LAST_UPDATE_TIMER + mvc __LC_SYNC_ENTER_TIMER(8),__LC_LAST_UPDATE_TIMER + mvc __LC_EXIT_TIMER(8),__LC_LAST_UPDATE_TIMER +0: tm __LC_MCCK_CODE+2,0x08 # mwp of old psw valid? + bno BASED(mcck_no_vtime) # no -> skip cleanup critical + tm __LC_MCK_OLD_PSW+1,0x01 # interrupting from user ? bz BASED(mcck_no_vtime) UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER mcck_no_vtime: #endif +0: + tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid? + bno BASED(mcck_int_main) # no -> skip cleanup critical + tm __LC_MCK_OLD_PSW+1,0x01 # test problem state bit + bnz BASED(mcck_int_main) # from user -> load async stack + clc __LC_MCK_OLD_PSW+4(4),BASED(.Lcritical_end) + bhe BASED(mcck_int_main) + clc __LC_MCK_OLD_PSW+4(4),BASED(.Lcritical_start) + bl BASED(mcck_int_main) + l %r14,BASED(.Lcleanup_critical) + basr %r14,%r14 +mcck_int_main: + l %r14,__LC_PANIC_STACK # are we already on the panic stack? + slr %r14,%r15 + sra %r14,PAGE_SHIFT + be BASED(0f) + l %r15,__LC_PANIC_STACK # load panic stack +0: CREATE_STACK_FRAME __LC_MCK_OLD_PSW,__LC_SAVE_AREA+32 + l %r9,__LC_THREAD_INFO # load pointer to thread_info struct + la %r2,SP_PTREGS(%r15) # load pt_regs l %r1,BASED(.Ls390_mcck) - basr %r14,%r1 # call machine check handler + basr %r14,%r1 # call machine check handler + tm SP_PSW+1(%r15),0x01 # returning to user ? + bno BASED(mcck_return) + l %r1,__LC_KERNEL_STACK # switch to kernel stack + s %r1,BASED(.Lc_spsize) + mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) + xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain + lr %r15,%r1 + stosm __SF_EMPTY(%r15),0x04 # turn dat on + tm __TI_flags+3(%r9),_TIF_MCCK_PENDING + bno BASED(mcck_return) + l %r1,BASED(.Ls390_handle_mcck) + basr %r14,%r1 # call machine check handler mcck_return: RESTORE_ALL 0 @@ -742,7 +823,7 @@ cleanup_critical: clc 4(4,%r12),BASED(cleanup_table_sysc_work_loop) bl BASED(0f) clc 4(4,%r12),BASED(cleanup_table_sysc_work_loop+4) - bl BASED(cleanup_sysc_leave) + bl BASED(cleanup_sysc_return) 0: br %r14 @@ -760,6 +841,7 @@ cleanup_system_call: mvc __LC_SAVE_AREA(16),__LC_SAVE_AREA+16 0: st %r13,__LC_SAVE_AREA+20 SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1 + CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA st %r15,__LC_SAVE_AREA+28 lh %r7,0x8a #ifdef CONFIG_VIRT_CPU_ACCOUNTING @@ -834,6 +916,8 @@ cleanup_sysc_leave_insn: * Symbol constants */ .Ls390_mcck: .long s390_do_machine_check +.Ls390_handle_mcck: + .long s390_handle_mcck .Ldo_IRQ: .long do_IRQ .Ldo_extint: .long do_extint .Ldo_signal: .long do_signal diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 51527ab8c8f9..d9f22915008c 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -7,6 +7,7 @@ * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), * Hartmut Penner (hp@de.ibm.com), * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), + * Heiko Carstens <heiko.carstens@de.ibm.com> */ #include <linux/sys.h> @@ -52,9 +53,9 @@ SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER STACK_SIZE = 1 << STACK_SHIFT -_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \ +_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING | \ _TIF_RESTART_SVC | _TIF_SINGLE_STEP ) -_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NEED_RESCHED) +_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING) #define BASED(name) name-system_call(%r13) @@ -114,7 +115,11 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NEED_RESCHED) jz stack_overflow 3: #endif -2: aghi %r15,-SP_SIZE # make room for registers & psw +2: + .endm + + .macro CREATE_STACK_FRAME psworg,savearea + aghi %r15,-SP_SIZE # make room for registers & psw mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack la %r12,\psworg stg %r2,SP_ORIG_R2(%r15) # store original content of gpr 2 @@ -152,6 +157,13 @@ __switch_to: je __switch_to_noper # we got away without bashing TLB's lctlg %c9,%c11,__THREAD_per(%r3) # Nope we didn't __switch_to_noper: + lg %r4,__THREAD_info(%r2) # get thread_info of prev + tm __TI_flags+7(%r4),_TIF_MCCK_PENDING # machine check pending? + jz __switch_to_no_mcck + ni __TI_flags+7(%r4),255-_TIF_MCCK_PENDING # clear flag in prev + lg %r4,__THREAD_info(%r3) # get thread_info of next + oi __TI_flags+7(%r4),_TIF_MCCK_PENDING # set it in next +__switch_to_no_mcck: stmg %r6,%r15,__SF_GPRS(%r15)# store __switch_to registers of prev task stg %r15,__THREAD_ksp(%r2) # store kernel stack to prev->tss.ksp lg %r15,__THREAD_ksp(%r3) # load kernel stack from next->tss.ksp @@ -176,6 +188,7 @@ system_call: sysc_saveall: SAVE_ALL_BASE __LC_SAVE_AREA SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1 + CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore #ifdef CONFIG_VIRT_CPU_ACCOUNTING sysc_vtime: @@ -232,6 +245,8 @@ sysc_work_loop: # One of the work bits is on. Find out which one. # sysc_work: + tm __TI_flags+7(%r9),_TIF_MCCK_PENDING + jo sysc_mcck_pending tm __TI_flags+7(%r9),_TIF_NEED_RESCHED jo sysc_reschedule tm __TI_flags+7(%r9),_TIF_SIGPENDING @@ -250,6 +265,13 @@ sysc_reschedule: jg schedule # return point is sysc_return # +# _TIF_MCCK_PENDING is set, call handler +# +sysc_mcck_pending: + larl %r14,sysc_work_loop + jg s390_handle_mcck # TIF bit will be cleared by handler + +# # _TIF_SIGPENDING is set, call do_signal # sysc_sigpending: @@ -474,6 +496,7 @@ pgm_check_handler: tm __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception jnz pgm_per # got per exception -> special case SAVE_ALL __LC_PGM_OLD_PSW,__LC_SAVE_AREA,1 + CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA #ifdef CONFIG_VIRT_CPU_ACCOUNTING tm SP_PSW+1(%r15),0x01 # interrupting from user ? jz pgm_no_vtime @@ -512,6 +535,7 @@ pgm_per: # pgm_per_std: SAVE_ALL __LC_PGM_OLD_PSW,__LC_SAVE_AREA,1 + CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA #ifdef CONFIG_VIRT_CPU_ACCOUNTING tm SP_PSW+1(%r15),0x01 # interrupting from user ? jz pgm_no_vtime2 @@ -537,6 +561,7 @@ pgm_no_vtime2: # pgm_svcper: SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1 + CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA #ifdef CONFIG_VIRT_CPU_ACCOUNTING tm SP_PSW+1(%r15),0x01 # interrupting from user ? jz pgm_no_vtime3 @@ -564,6 +589,7 @@ io_int_handler: stck __LC_INT_CLOCK SAVE_ALL_BASE __LC_SAVE_AREA+32 SAVE_ALL __LC_IO_OLD_PSW,__LC_SAVE_AREA+32,0 + CREATE_STACK_FRAME __LC_IO_OLD_PSW,__LC_SAVE_AREA+32 #ifdef CONFIG_VIRT_CPU_ACCOUNTING tm SP_PSW+1(%r15),0x01 # interrupting from user ? jz io_no_vtime @@ -621,9 +647,11 @@ io_work: lgr %r15,%r1 # # One of the work bits is on. Find out which one. -# Checked are: _TIF_SIGPENDING and _TIF_NEED_RESCHED +# Checked are: _TIF_SIGPENDING, _TIF_NEED_RESCHED and _TIF_MCCK_PENDING # io_work_loop: + tm __TI_flags+7(%r9),_TIF_MCCK_PENDING + jo io_mcck_pending tm __TI_flags+7(%r9),_TIF_NEED_RESCHED jo io_reschedule tm __TI_flags+7(%r9),_TIF_SIGPENDING @@ -631,6 +659,13 @@ io_work_loop: j io_leave # +# _TIF_MCCK_PENDING is set, call handler +# +io_mcck_pending: + larl %r14,io_work_loop + jg s390_handle_mcck # TIF bit will be cleared by handler + +# # _TIF_NEED_RESCHED is set, call schedule # io_reschedule: @@ -661,6 +696,7 @@ ext_int_handler: stck __LC_INT_CLOCK SAVE_ALL_BASE __LC_SAVE_AREA+32 SAVE_ALL __LC_EXT_OLD_PSW,__LC_SAVE_AREA+32,0 + CREATE_STACK_FRAME __LC_EXT_OLD_PSW,__LC_SAVE_AREA+32 #ifdef CONFIG_VIRT_CPU_ACCOUNTING tm SP_PSW+1(%r15),0x01 # interrupting from user ? jz ext_no_vtime @@ -680,18 +716,60 @@ ext_no_vtime: */ .globl mcck_int_handler mcck_int_handler: - STORE_TIMER __LC_ASYNC_ENTER_TIMER + la %r1,4095 # revalidate r1 + spt __LC_CPU_TIMER_SAVE_AREA-4095(%r1) # revalidate cpu timer + lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# revalidate gprs SAVE_ALL_BASE __LC_SAVE_AREA+64 - SAVE_ALL __LC_MCK_OLD_PSW,__LC_SAVE_AREA+64,0 + la %r12,__LC_MCK_OLD_PSW + tm __LC_MCCK_CODE,0x80 # system damage? + jo mcck_int_main # yes -> rest of mcck code invalid + tm __LC_MCCK_CODE+5,0x02 # stored cpu timer value valid? + jo 0f + spt __LC_LAST_UPDATE_TIMER #ifdef CONFIG_VIRT_CPU_ACCOUNTING - tm SP_PSW+1(%r15),0x01 # interrupting from user ? + mvc __LC_ASYNC_ENTER_TIMER(8),__LC_LAST_UPDATE_TIMER + mvc __LC_SYNC_ENTER_TIMER(8),__LC_LAST_UPDATE_TIMER + mvc __LC_EXIT_TIMER(8),__LC_LAST_UPDATE_TIMER +0: tm __LC_MCCK_CODE+2,0x08 # mwp of old psw valid? + jno mcck_no_vtime # no -> no timer update + tm __LC_MCK_OLD_PSW+1,0x01 # interrupting from user ? jz mcck_no_vtime UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER mcck_no_vtime: #endif - brasl %r14,s390_do_machine_check +0: + tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid? + jno mcck_int_main # no -> skip cleanup critical + tm __LC_MCK_OLD_PSW+1,0x01 # test problem state bit + jnz mcck_int_main # from user -> load kernel stack + clc __LC_MCK_OLD_PSW+8(8),BASED(.Lcritical_end) + jhe mcck_int_main + clc __LC_MCK_OLD_PSW+8(8),BASED(.Lcritical_start) + jl mcck_int_main + brasl %r14,cleanup_critical +mcck_int_main: + lg %r14,__LC_PANIC_STACK # are we already on the panic stack? + slgr %r14,%r15 + srag %r14,%r14,PAGE_SHIFT + jz 0f + lg %r15,__LC_PANIC_STACK # load panic stack +0: CREATE_STACK_FRAME __LC_MCK_OLD_PSW,__LC_SAVE_AREA+64 + lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct + la %r2,SP_PTREGS(%r15) # load pt_regs + brasl %r14,s390_do_machine_check + tm SP_PSW+1(%r15),0x01 # returning to user ? + jno mcck_return + lg %r1,__LC_KERNEL_STACK # switch to kernel stack + aghi %r1,-SP_SIZE + mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) + xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain + lgr %r15,%r1 + stosm __SF_EMPTY(%r15),0x04 # turn dat on + tm __TI_flags+7(%r9),_TIF_MCCK_PENDING + jno mcck_return + brasl %r14,s390_handle_mcck mcck_return: RESTORE_ALL 0 @@ -775,7 +853,7 @@ cleanup_critical: clc 8(8,%r12),BASED(cleanup_table_sysc_work_loop) jl 0f clc 8(8,%r12),BASED(cleanup_table_sysc_work_loop+8) - jl cleanup_sysc_leave + jl cleanup_sysc_return 0: br %r14 @@ -793,6 +871,7 @@ cleanup_system_call: mvc __LC_SAVE_AREA(32),__LC_SAVE_AREA+32 0: stg %r13,__LC_SAVE_AREA+40 SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1 + CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA stg %r15,__LC_SAVE_AREA+56 llgh %r7,__LC_SVC_INT_CODE #ifdef CONFIG_VIRT_CPU_ACCOUNTING diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index fc8bf5e285f6..2710e66fefba 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -346,6 +346,13 @@ iplstart: la %r2,.Lreset lhi %r3,26 diag %r2,%r3,8 + la %r5,.Lirb + stsch 0(%r5) # check if irq is pending + tm 30(%r5),0x0f # by verifying if any of the + bnz .Lwaitforirq # activity or status control + tm 31(%r5),0xff # bits is set in the schib + bz .Lnoreset +.Lwaitforirq: mvc 0x78(8),.Lrdrnewpsw # set up IO interrupt psw .Lwaitrdrirq: lpsw .Lrdrwaitpsw @@ -535,8 +542,13 @@ startup:basr %r13,0 # get base lhi %r1,0 icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0 jnz .Lscnd - l %r1,.Lscpincr2-PARMAREA+4(%r4) # otherwise use this one + lhi %r1,0x800 # otherwise report 2GB .Lscnd: + lhi %r3,0x800 # limit reported memory size to 2GB + cr %r1,%r3 + jl .Lno2gb + lr %r1,%r3 +.Lno2gb: xr %r3,%r3 # same logic ic %r3,.Lscpa1-PARMAREA(%r4) chi %r3,0x00 @@ -765,7 +777,7 @@ _stext: basr %r13,0 # get base # check control registers stctl %c0,%c15,0(%r15) - oi 2(%r15),0x20 # enable sigp external interrupts + oi 2(%r15),0x40 # enable sigp emergency signal oi 0(%r15),0x10 # switch on low address protection lctl %c0,%c15,0(%r15) diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index f525c0c21250..9a8263a153cb 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -345,6 +345,13 @@ iplstart: la %r2,.Lreset lhi %r3,26 diag %r2,%r3,8 + la %r5,.Lirb + stsch 0(%r5) # check if irq is pending + tm 30(%r5),0x0f # by verifying if any of the + bnz .Lwaitforirq # activity or status control + tm 31(%r5),0xff # bits is set in the schib + bz .Lnoreset +.Lwaitforirq: mvc 0x78(8),.Lrdrnewpsw # set up IO interrupt psw .Lwaitrdrirq: lpsw .Lrdrwaitpsw @@ -658,10 +665,8 @@ startup:basr %r13,0 # get base # la %r1,0f-.LPG1(%r13) # set program check address stg %r1,__LC_PGM_NEW_PSW+8 - mvc __LC_DIAG44_OPCODE(8),.Lnop-.LPG1(%r13) diag 0,0,0x44 # test diag 0x44 oi 7(%r12),32 # set diag44 flag - mvc __LC_DIAG44_OPCODE(8),.Ldiag44-.LPG1(%r13) 0: # @@ -702,7 +707,6 @@ startup:basr %r13,0 # get base .L4malign:.quad 0xffffffffffc00000 .Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8 .Lnop: .long 0x07000700 -.Ldiag44:.long 0x83000044 .org PARMAREA-64 .Lduct: .long 0,0,0,0,0,0,0,0 @@ -765,7 +769,7 @@ _stext: basr %r13,0 # get base # check control registers stctg %c0,%c15,0(%r15) - oi 6(%r15),0x20 # enable sigp external interrupts + oi 6(%r15),0x40 # enable sigp emergency signal oi 4(%r15),0x10 # switch on low address proctection lctlg %c0,%c15,0(%r15) diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c new file mode 100644 index 000000000000..5aa71b05b8ae --- /dev/null +++ b/arch/s390/kernel/machine_kexec.c @@ -0,0 +1,105 @@ +/* + * arch/s390/kernel/machine_kexec.c + * + * (C) Copyright IBM Corp. 2005 + * + * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com> + * + */ + +/* + * s390_machine_kexec.c - handle the transition of Linux booting another kernel + * on the S390 architecture. + */ + +#include <asm/cio.h> +#include <asm/setup.h> +#include <linux/device.h> +#include <linux/mm.h> +#include <linux/kexec.h> +#include <linux/delay.h> +#include <asm/pgtable.h> +#include <asm/pgalloc.h> +#include <asm/system.h> + +static void kexec_halt_all_cpus(void *); + +typedef void (*relocate_kernel_t) (kimage_entry_t *, unsigned long); + +const extern unsigned char relocate_kernel[]; +const extern unsigned long long relocate_kernel_len; + +int +machine_kexec_prepare(struct kimage *image) +{ + unsigned long reboot_code_buffer; + + /* We don't support anything but the default image type for now. */ + if (image->type != KEXEC_TYPE_DEFAULT) + return -EINVAL; + + /* Get the destination where the assembler code should be copied to.*/ + reboot_code_buffer = page_to_pfn(image->control_code_page)<<PAGE_SHIFT; + + /* Then copy it */ + memcpy((void *) reboot_code_buffer, relocate_kernel, + relocate_kernel_len); + return 0; +} + +void +machine_kexec_cleanup(struct kimage *image) +{ +} + +void +machine_shutdown(void) +{ + printk(KERN_INFO "kexec: machine_shutdown called\n"); +} + +NORET_TYPE void +machine_kexec(struct kimage *image) +{ + clear_all_subchannels(); + + /* Disable lowcore protection */ + ctl_clear_bit(0,28); + + on_each_cpu(kexec_halt_all_cpus, image, 0, 0); + for (;;); +} + +extern void pfault_fini(void); + +static void +kexec_halt_all_cpus(void *kernel_image) +{ + static atomic_t cpuid = ATOMIC_INIT(-1); + int cpu; + struct kimage *image; + relocate_kernel_t data_mover; + +#ifdef CONFIG_PFAULT + if (MACHINE_IS_VM) + pfault_fini(); +#endif + + if (atomic_compare_and_swap(-1, smp_processor_id(), &cpuid)) + signal_processor(smp_processor_id(), sigp_stop); + + /* Wait for all other cpus to enter stopped state */ + for_each_online_cpu(cpu) { + if (cpu == smp_processor_id()) + continue; + while (!smp_cpu_not_running(cpu)) + cpu_relax(); + } + + image = (struct kimage *) kernel_image; + data_mover = (relocate_kernel_t) + (page_to_pfn(image->control_code_page) << PAGE_SHIFT); + + /* Call the moving routine */ + (*data_mover) (&image->head, image->start); +} diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 7aea25d6e300..9f3dff6c0b72 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -91,13 +91,12 @@ void do_monitor_call(struct pt_regs *regs, long interruption_code) (void *)(long) smp_processor_id()); } +extern void s390_handle_mcck(void); /* * The idle loop on a S390... */ void default_idle(void) { - psw_t wait_psw; - unsigned long reg; int cpu, rc; local_irq_disable(); @@ -125,38 +124,17 @@ void default_idle(void) cpu_die(); #endif - /* - * Wait for external, I/O or machine check interrupt and - * switch off machine check bit after the wait has ended. - */ - wait_psw.mask = PSW_KERNEL_BITS | PSW_MASK_MCHECK | PSW_MASK_WAIT | - PSW_MASK_IO | PSW_MASK_EXT; -#ifndef CONFIG_ARCH_S390X - asm volatile ( - " basr %0,0\n" - "0: la %0,1f-0b(%0)\n" - " st %0,4(%1)\n" - " oi 4(%1),0x80\n" - " lpsw 0(%1)\n" - "1: la %0,2f-1b(%0)\n" - " st %0,4(%1)\n" - " oi 4(%1),0x80\n" - " ni 1(%1),0xf9\n" - " lpsw 0(%1)\n" - "2:" - : "=&a" (reg) : "a" (&wait_psw) : "memory", "cc" ); -#else /* CONFIG_ARCH_S390X */ - asm volatile ( - " larl %0,0f\n" - " stg %0,8(%1)\n" - " lpswe 0(%1)\n" - "0: larl %0,1f\n" - " stg %0,8(%1)\n" - " ni 1(%1),0xf9\n" - " lpswe 0(%1)\n" - "1:" - : "=&a" (reg) : "a" (&wait_psw) : "memory", "cc" ); -#endif /* CONFIG_ARCH_S390X */ + local_mcck_disable(); + if (test_thread_flag(TIF_MCCK_PENDING)) { + local_mcck_enable(); + local_irq_enable(); + s390_handle_mcck(); + return; + } + + /* Wait for external, I/O or machine check interrupt. */ + __load_psw_mask(PSW_KERNEL_BITS | PSW_MASK_WAIT | + PSW_MASK_IO | PSW_MASK_EXT); } void cpu_idle(void) diff --git a/arch/s390/kernel/relocate_kernel.S b/arch/s390/kernel/relocate_kernel.S new file mode 100644 index 000000000000..2a25ec7147ff --- /dev/null +++ b/arch/s390/kernel/relocate_kernel.S @@ -0,0 +1,120 @@ +/* + * arch/s390/kernel/relocate_kernel.S + * + * (C) Copyright IBM Corp. 2005 + * + * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com> + * Heiko Carstens <heiko.carstens@de.ibm.com> + * + */ + +/* + * moves the new kernel to its destination... + * %r2 = pointer to first kimage_entry_t + * %r3 = start address - where to jump to after the job is done... + * + * %r5 will be used as temp. storage + * %r6 holds the destination address + * %r7 = PAGE_SIZE + * %r8 holds the source address + * %r9 = PAGE_SIZE + * %r10 is a page mask + */ + + .text + .globl relocate_kernel + relocate_kernel: + basr %r13,0 #base address + .base: + stnsm sys_msk-.base(%r13),0xf8 #disable DAT and IRQ (external) + spx zero64-.base(%r13) #absolute addressing mode + stctl %c0,%c15,ctlregs-.base(%r13) + stm %r0,%r15,gprregs-.base(%r13) + la %r1,load_psw-.base(%r13) + mvc 0(8,%r0),0(%r1) + la %r0,.back-.base(%r13) + st %r0,4(%r0) + oi 4(%r0),0x80 + mvc 0x68(8,%r0),0(%r1) + la %r0,.back_pgm-.base(%r13) + st %r0,0x6c(%r0) + oi 0x6c(%r0),0x80 + lhi %r0,0 + diag %r0,%r0,0x308 + .back: + basr %r13,0 + .back_base: + oi have_diag308-.back_base(%r13),0x01 + lctl %c0,%c15,ctlregs-.back_base(%r13) + lm %r0,%r15,gprregs-.back_base(%r13) + j .start_reloc + .back_pgm: + lm %r0,%r15,gprregs-.base(%r13) + .start_reloc: + lhi %r10,-1 #preparing the mask + sll %r10,12 #shift it such that it becomes 0xf000 + .top: + lhi %r7,4096 #load PAGE_SIZE in r7 + lhi %r9,4096 #load PAGE_SIZE in r9 + l %r5,0(%r2) #read another word for indirection page + ahi %r2,4 #increment pointer + tml %r5,0x1 #is it a destination page? + je .indir_check #NO, goto "indir_check" + lr %r6,%r5 #r6 = r5 + nr %r6,%r10 #mask it out and... + j .top #...next iteration + .indir_check: + tml %r5,0x2 #is it a indirection page? + je .done_test #NO, goto "done_test" + nr %r5,%r10 #YES, mask out, + lr %r2,%r5 #move it into the right register, + j .top #and read next... + .done_test: + tml %r5,0x4 #is it the done indicator? + je .source_test #NO! Well, then it should be the source indicator... + j .done #ok, lets finish it here... + .source_test: + tml %r5,0x8 #it should be a source indicator... + je .top #NO, ignore it... + lr %r8,%r5 #r8 = r5 + nr %r8,%r10 #masking + 0: mvcle %r6,%r8,0x0 #copy PAGE_SIZE bytes from r8 to r6 - pad with 0 + jo 0b + j .top + .done: + sr %r0,%r0 #clear register r0 + la %r4,load_psw-.base(%r13) #load psw-address into the register + o %r3,4(%r4) #or load address into psw + st %r3,4(%r4) + mvc 0(8,%r0),0(%r4) #copy psw to absolute address 0 + tm have_diag308-.base(%r13),0x01 + jno .no_diag308 + diag %r0,%r0,0x308 + .no_diag308: + sr %r1,%r1 #clear %r1 + sr %r2,%r2 #clear %r2 + sigp %r1,%r2,0x12 #set cpuid to zero + lpsw 0 #hopefully start new kernel... + + .align 8 + zero64: + .quad 0 + load_psw: + .long 0x00080000,0x80000000 + sys_msk: + .quad 0 + ctlregs: + .rept 16 + .long 0 + .endr + gprregs: + .rept 16 + .long 0 + .endr + have_diag308: + .byte 0 + .align 8 + relocate_kernel_end: + .globl relocate_kernel_len + relocate_kernel_len: + .quad relocate_kernel_end - relocate_kernel diff --git a/arch/s390/kernel/relocate_kernel64.S b/arch/s390/kernel/relocate_kernel64.S new file mode 100644 index 000000000000..8cdb86e8911f --- /dev/null +++ b/arch/s390/kernel/relocate_kernel64.S @@ -0,0 +1,123 @@ +/* + * arch/s390/kernel/relocate_kernel64.S + * + * (C) Copyright IBM Corp. 2005 + * + * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com> + * Heiko Carstens <heiko.carstens@de.ibm.com> + * + */ + +/* + * moves the new kernel to its destination... + * %r2 = pointer to first kimage_entry_t + * %r3 = start address - where to jump to after the job is done... + * + * %r5 will be used as temp. storage + * %r6 holds the destination address + * %r7 = PAGE_SIZE + * %r8 holds the source address + * %r9 = PAGE_SIZE + * + * 0xf000 is a page_mask + */ + + .text + .globl relocate_kernel + relocate_kernel: + basr %r13,0 #base address + .base: + stnsm sys_msk-.base(%r13),0xf8 #disable DAT and IRQs + spx zero64-.base(%r13) #absolute addressing mode + stctg %c0,%c15,ctlregs-.base(%r13) + stmg %r0,%r15,gprregs-.base(%r13) + lghi %r0,3 + sllg %r0,%r0,31 + stg %r0,0x1d0(%r0) + la %r0,.back_pgm-.base(%r13) + stg %r0,0x1d8(%r0) + la %r1,load_psw-.base(%r13) + mvc 0(8,%r0),0(%r1) + la %r0,.back-.base(%r13) + st %r0,4(%r0) + oi 4(%r0),0x80 + lghi %r0,0 + diag %r0,%r0,0x308 + .back: + lhi %r1,1 #mode 1 = esame + sigp %r1,%r0,0x12 #switch to esame mode + sam64 #switch to 64 bit addressing mode + basr %r13,0 + .back_base: + oi have_diag308-.back_base(%r13),0x01 + lctlg %c0,%c15,ctlregs-.back_base(%r13) + lmg %r0,%r15,gprregs-.back_base(%r13) + j .top + .back_pgm: + lmg %r0,%r15,gprregs-.base(%r13) + .top: + lghi %r7,4096 #load PAGE_SIZE in r7 + lghi %r9,4096 #load PAGE_SIZE in r9 + lg %r5,0(%r2) #read another word for indirection page + aghi %r2,8 #increment pointer + tml %r5,0x1 #is it a destination page? + je .indir_check #NO, goto "indir_check" + lgr %r6,%r5 #r6 = r5 + nill %r6,0xf000 #mask it out and... + j .top #...next iteration + .indir_check: + tml %r5,0x2 #is it a indirection page? + je .done_test #NO, goto "done_test" + nill %r5,0xf000 #YES, mask out, + lgr %r2,%r5 #move it into the right register, + j .top #and read next... + .done_test: + tml %r5,0x4 #is it the done indicator? + je .source_test #NO! Well, then it should be the source indicator... + j .done #ok, lets finish it here... + .source_test: + tml %r5,0x8 #it should be a source indicator... + je .top #NO, ignore it... + lgr %r8,%r5 #r8 = r5 + nill %r8,0xf000 #masking + 0: mvcle %r6,%r8,0x0 #copy PAGE_SIZE bytes from r8 to r6 - pad with 0 + jo 0b + j .top + .done: + sgr %r0,%r0 #clear register r0 + la %r4,load_psw-.base(%r13) #load psw-address into the register + o %r3,4(%r4) #or load address into psw + st %r3,4(%r4) + mvc 0(8,%r0),0(%r4) #copy psw to absolute address 0 + tm have_diag308-.base(%r13),0x01 + jno .no_diag308 + diag %r0,%r0,0x308 + .no_diag308: + sam31 #31 bit mode + sr %r1,%r1 #erase register r1 + sr %r2,%r2 #erase register r2 + sigp %r1,%r2,0x12 #set cpuid to zero + lpsw 0 #hopefully start new kernel... + + .align 8 + zero64: + .quad 0 + load_psw: + .long 0x00080000,0x80000000 + sys_msk: + .quad 0 + ctlregs: + .rept 16 + .quad 0 + .endr + gprregs: + .rept 16 + .quad 0 + .endr + have_diag308: + .byte 0 + .align 8 + relocate_kernel_end: + .globl relocate_kernel_len + relocate_kernel_len: + .quad relocate_kernel_end - relocate_kernel diff --git a/arch/s390/kernel/s390_ext.c b/arch/s390/kernel/s390_ext.c index 3bdd38ec71da..207bc511a6e3 100644 --- a/arch/s390/kernel/s390_ext.c +++ b/arch/s390/kernel/s390_ext.c @@ -19,7 +19,6 @@ #include <asm/irq.h> /* - * Simple hash strategy: index = code & 0xff; * ext_int_hash[index] is the start of the list for all external interrupts * that hash to this index. With the current set of external interrupts * (0x1202 external call, 0x1004 cpu timer, 0x2401 hwc console, 0x4000 @@ -27,6 +26,11 @@ */ ext_int_info_t *ext_int_hash[256] = { 0, }; +static inline int ext_hash(__u16 code) +{ + return (code + (code >> 9)) & 0xff; +} + int register_external_interrupt(__u16 code, ext_int_handler_t handler) { ext_int_info_t *p; @@ -37,7 +41,7 @@ int register_external_interrupt(__u16 code, ext_int_handler_t handler) return -ENOMEM; p->code = code; p->handler = handler; - index = code & 0xff; + index = ext_hash(code); p->next = ext_int_hash[index]; ext_int_hash[index] = p; return 0; @@ -52,7 +56,7 @@ int register_early_external_interrupt(__u16 code, ext_int_handler_t handler, return -EINVAL; p->code = code; p->handler = handler; - index = code & 0xff; + index = ext_hash(code); p->next = ext_int_hash[index]; ext_int_hash[index] = p; return 0; @@ -63,7 +67,7 @@ int unregister_external_interrupt(__u16 code, ext_int_handler_t handler) ext_int_info_t *p, *q; int index; - index = code & 0xff; + index = ext_hash(code); q = NULL; p = ext_int_hash[index]; while (p != NULL) { @@ -90,7 +94,7 @@ int unregister_early_external_interrupt(__u16 code, ext_int_handler_t handler, if (p == NULL || p->code != code || p->handler != handler) return -EINVAL; - index = code & 0xff; + index = ext_hash(code); q = ext_int_hash[index]; if (p != q) { while (q != NULL) { @@ -120,7 +124,7 @@ void do_extint(struct pt_regs *regs, unsigned short code) */ account_ticks(regs); kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++; - index = code & 0xff; + index = ext_hash(code); for (p = ext_int_hash[index]; p; p = p->next) { if (likely(p->code == code)) { if (likely(p->handler)) diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index df83215beac3..5ba5a5485da9 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -198,11 +198,11 @@ static void __init conmode_default(void) char *ptr; if (MACHINE_IS_VM) { - __cpcmd("QUERY CONSOLE", query_buffer, 1024); + __cpcmd("QUERY CONSOLE", query_buffer, 1024, NULL); console_devno = simple_strtoul(query_buffer + 5, NULL, 16); ptr = strstr(query_buffer, "SUBCHANNEL ="); console_irq = simple_strtoul(ptr + 13, NULL, 16); - __cpcmd("QUERY TERM", query_buffer, 1024); + __cpcmd("QUERY TERM", query_buffer, 1024, NULL); ptr = strstr(query_buffer, "CONMODE"); /* * Set the conmode to 3215 so that the device recognition @@ -211,7 +211,7 @@ static void __init conmode_default(void) * 3215 and the 3270 driver will try to access the console * device (3215 as console and 3270 as normal tty). */ - __cpcmd("TERM CONMODE 3215", NULL, 0); + __cpcmd("TERM CONMODE 3215", NULL, 0, NULL); if (ptr == NULL) { #if defined(CONFIG_SCLP_CONSOLE) SET_CONSOLE_SCLP; @@ -299,24 +299,18 @@ void machine_restart(char *command) _machine_restart(command); } -EXPORT_SYMBOL(machine_restart); - void machine_halt(void) { console_unblank(); _machine_halt(); } -EXPORT_SYMBOL(machine_halt); - void machine_power_off(void) { console_unblank(); _machine_power_off(); } -EXPORT_SYMBOL(machine_power_off); - static void __init add_memory_hole(unsigned long start, unsigned long end) { @@ -414,7 +408,8 @@ setup_lowcore(void) lc->program_new_psw.mask = PSW_KERNEL_BITS; lc->program_new_psw.addr = PSW_ADDR_AMODE | (unsigned long)pgm_check_handler; - lc->mcck_new_psw.mask = PSW_KERNEL_BITS; + lc->mcck_new_psw.mask = + PSW_KERNEL_BITS & ~PSW_MASK_MCHECK & ~PSW_MASK_DAT; lc->mcck_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) mcck_int_handler; lc->io_new_psw.mask = PSW_KERNEL_BITS; @@ -424,18 +419,18 @@ setup_lowcore(void) lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE; lc->async_stack = (unsigned long) __alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0) + ASYNC_SIZE; -#ifdef CONFIG_CHECK_STACK lc->panic_stack = (unsigned long) __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE; -#endif lc->current_task = (unsigned long) init_thread_union.thread_info.task; lc->thread_info = (unsigned long) &init_thread_union; -#ifdef CONFIG_ARCH_S390X - if (MACHINE_HAS_DIAG44) - lc->diag44_opcode = 0x83000044; - else - lc->diag44_opcode = 0x07000700; -#endif /* CONFIG_ARCH_S390X */ +#ifndef CONFIG_ARCH_S390X + if (MACHINE_HAS_IEEE) { + lc->extended_save_area_addr = (__u32) + __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0); + /* enable extended save area */ + ctl_set_bit(14, 29); + } +#endif set_prefix((u32)(unsigned long) lc); } diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index fdfcf0488b49..85222fee4361 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -284,7 +284,7 @@ static void do_machine_restart(void * __unused) * locks are always held disabled). */ if (MACHINE_IS_VM) - cpcmd ("IPL", NULL, 0); + cpcmd ("IPL", NULL, 0, NULL); else reipl (0x10000 | S390_lowcore.ipl_device); } @@ -313,7 +313,7 @@ static void do_machine_halt(void * __unused) if (atomic_compare_and_swap(-1, smp_processor_id(), &cpuid) == 0) { smp_send_stop(); if (MACHINE_IS_VM && strlen(vmhalt_cmd) > 0) - cpcmd(vmhalt_cmd, NULL, 0); + cpcmd(vmhalt_cmd, NULL, 0, NULL); signal_processor(smp_processor_id(), sigp_stop_and_store_status); } @@ -332,7 +332,7 @@ static void do_machine_power_off(void * __unused) if (atomic_compare_and_swap(-1, smp_processor_id(), &cpuid) == 0) { smp_send_stop(); if (MACHINE_IS_VM && strlen(vmpoff_cmd) > 0) - cpcmd(vmpoff_cmd, NULL, 0); + cpcmd(vmpoff_cmd, NULL, 0, NULL); signal_processor(smp_processor_id(), sigp_stop_and_store_status); } @@ -375,7 +375,7 @@ static void smp_ext_bitcall(int cpu, ec_bit_sig sig) * Set signaling bit in lowcore of target cpu and kick it */ set_bit(sig, (unsigned long *) &lowcore_ptr[cpu]->ext_call_fast); - while(signal_processor(cpu, sigp_external_call) == sigp_busy) + while(signal_processor(cpu, sigp_emergency_signal) == sigp_busy) udelay(10); } @@ -394,7 +394,7 @@ static void smp_ext_bitcall_others(ec_bit_sig sig) * Set signaling bit in lowcore of target cpu and kick it */ set_bit(sig, (unsigned long *) &lowcore_ptr[cpu]->ext_call_fast); - while (signal_processor(cpu, sigp_external_call) == sigp_busy) + while (signal_processor(cpu, sigp_emergency_signal) == sigp_busy) udelay(10); } } @@ -537,7 +537,8 @@ int __devinit start_secondary(void *cpuvoid) #endif #ifdef CONFIG_PFAULT /* Enable pfault pseudo page faults on this cpu. */ - pfault_init(); + if (MACHINE_IS_VM) + pfault_init(); #endif /* Mark this cpu as online */ cpu_set(smp_processor_id(), cpu_online_map); @@ -679,16 +680,19 @@ __cpu_disable(void) { unsigned long flags; ec_creg_mask_parms cr_parms; + int cpu = smp_processor_id(); spin_lock_irqsave(&smp_reserve_lock, flags); - if (smp_cpu_reserved[smp_processor_id()] != 0) { + if (smp_cpu_reserved[cpu] != 0) { spin_unlock_irqrestore(&smp_reserve_lock, flags); return -EBUSY; } + cpu_clear(cpu, cpu_online_map); #ifdef CONFIG_PFAULT /* Disable pfault pseudo page faults on this cpu. */ - pfault_fini(); + if (MACHINE_IS_VM) + pfault_fini(); #endif /* disable all external interrupts */ @@ -749,9 +753,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus) unsigned int cpu; int i; - /* request the 0x1202 external interrupt */ - if (register_external_interrupt(0x1202, do_ext_call_interrupt) != 0) - panic("Couldn't request external interrupt 0x1202"); + /* request the 0x1201 emergency signal external interrupt */ + if (register_external_interrupt(0x1201, do_ext_call_interrupt) != 0) + panic("Couldn't request external interrupt 0x1201"); smp_check_cpus(max_cpus); memset(lowcore_ptr,0,sizeof(lowcore_ptr)); /* @@ -771,13 +775,24 @@ void __init smp_prepare_cpus(unsigned int max_cpus) *(lowcore_ptr[i]) = S390_lowcore; lowcore_ptr[i]->async_stack = stack + (ASYNC_SIZE); -#ifdef CONFIG_CHECK_STACK stack = __get_free_pages(GFP_KERNEL,0); if (stack == 0ULL) panic("smp_boot_cpus failed to allocate memory\n"); lowcore_ptr[i]->panic_stack = stack + (PAGE_SIZE); +#ifndef __s390x__ + if (MACHINE_HAS_IEEE) { + lowcore_ptr[i]->extended_save_area_addr = + (__u32) __get_free_pages(GFP_KERNEL,0); + if (lowcore_ptr[i]->extended_save_area_addr == 0) + panic("smp_boot_cpus failed to " + "allocate memory\n"); + } #endif } +#ifndef __s390x__ + if (MACHINE_HAS_IEEE) + ctl_set_bit(14, 29); /* enable extended save area */ +#endif set_prefix((u32)(unsigned long) lowcore_ptr[smp_processor_id()]); for_each_cpu(cpu) diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index 515938628f82..426d7cafdab3 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -285,8 +285,13 @@ SYSCALL(sys_mq_timedsend,sys_mq_timedsend,compat_sys_mq_timedsend_wrapper) SYSCALL(sys_mq_timedreceive,sys_mq_timedreceive,compat_sys_mq_timedreceive_wrapper) SYSCALL(sys_mq_notify,sys_mq_notify,compat_sys_mq_notify_wrapper) /* 275 */ SYSCALL(sys_mq_getsetattr,sys_mq_getsetattr,compat_sys_mq_getsetattr_wrapper) -NI_SYSCALL /* reserved for kexec */ +SYSCALL(sys_kexec_load,sys_kexec_load,compat_sys_kexec_load_wrapper) SYSCALL(sys_add_key,sys_add_key,compat_sys_add_key_wrapper) SYSCALL(sys_request_key,sys_request_key,compat_sys_request_key_wrapper) SYSCALL(sys_keyctl,sys_keyctl,compat_sys_keyctl) /* 280 */ SYSCALL(sys_waitid,sys_waitid,compat_sys_waitid_wrapper) +SYSCALL(sys_ioprio_set,sys_ioprio_set,sys_ioprio_set_wrapper) +SYSCALL(sys_ioprio_get,sys_ioprio_get,sys_ioprio_get_wrapper) +SYSCALL(sys_inotify_init,sys_inotify_init,sys_inotify_init) +SYSCALL(sys_inotify_add_watch,sys_inotify_add_watch,sys_inotify_add_watch_wrapper) +SYSCALL(sys_inotify_rm_watch,sys_inotify_rm_watch,sys_inotify_rm_watch_wrapper) diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index ca34b6f34b38..6b8703ec2ae6 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -29,6 +29,7 @@ #include <linux/delay.h> #include <linux/module.h> #include <linux/kallsyms.h> +#include <linux/reboot.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -675,6 +676,19 @@ asmlinkage void kernel_stack_overflow(struct pt_regs * regs) panic("Corrupt kernel stack, can't continue."); } +#ifndef CONFIG_ARCH_S390X +static int +pagex_reboot_event(struct notifier_block *this, unsigned long event, void *ptr) +{ + if (MACHINE_IS_VM) + cpcmd("SET PAGEX OFF", NULL, 0, NULL); + return NOTIFY_DONE; +} + +static struct notifier_block pagex_reboot_notifier = { + .notifier_call = &pagex_reboot_event, +}; +#endif /* init is done in lowcore.S and head.S */ @@ -735,7 +749,8 @@ void __init trap_init(void) &ext_int_pfault); #endif #ifndef CONFIG_ARCH_S390X - cpcmd("SET PAGEX ON", NULL, 0); + register_reboot_notifier(&pagex_reboot_notifier); + cpcmd("SET PAGEX ON", NULL, 0, NULL); #endif } } diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile index a8758b1d20a9..b701efa1f00e 100644 --- a/arch/s390/lib/Makefile +++ b/arch/s390/lib/Makefile @@ -5,5 +5,5 @@ EXTRA_AFLAGS := -traditional lib-y += delay.o string.o -lib-$(CONFIG_ARCH_S390_31) += uaccess.o -lib-$(CONFIG_ARCH_S390X) += uaccess64.o +lib-$(CONFIG_ARCH_S390_31) += uaccess.o spinlock.o +lib-$(CONFIG_ARCH_S390X) += uaccess64.o spinlock.o diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c new file mode 100644 index 000000000000..888b5596c195 --- /dev/null +++ b/arch/s390/lib/spinlock.c @@ -0,0 +1,133 @@ +/* + * arch/s390/lib/spinlock.c + * Out of line spinlock code. + * + * S390 version + * Copyright (C) 2004 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) + */ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/init.h> +#include <asm/io.h> + +atomic_t spin_retry_counter; +int spin_retry = 1000; + +/** + * spin_retry= parameter + */ +static int __init spin_retry_setup(char *str) +{ + spin_retry = simple_strtoul(str, &str, 0); + return 1; +} +__setup("spin_retry=", spin_retry_setup); + +static inline void +_diag44(void) +{ +#ifdef __s390x__ + if (MACHINE_HAS_DIAG44) +#endif + asm volatile("diag 0,0,0x44"); +} + +void +_raw_spin_lock_wait(spinlock_t *lp, unsigned int pc) +{ + int count = spin_retry; + + while (1) { + if (count-- <= 0) { + _diag44(); + count = spin_retry; + } + atomic_inc(&spin_retry_counter); + if (_raw_compare_and_swap(&lp->lock, 0, pc) == 0) + return; + } +} +EXPORT_SYMBOL(_raw_spin_lock_wait); + +int +_raw_spin_trylock_retry(spinlock_t *lp, unsigned int pc) +{ + int count = spin_retry; + + while (count-- > 0) { + atomic_inc(&spin_retry_counter); + if (_raw_compare_and_swap(&lp->lock, 0, pc) == 0) + return 1; + } + return 0; +} +EXPORT_SYMBOL(_raw_spin_trylock_retry); + +void +_raw_read_lock_wait(rwlock_t *rw) +{ + unsigned int old; + int count = spin_retry; + + while (1) { + if (count-- <= 0) { + _diag44(); + count = spin_retry; + } + atomic_inc(&spin_retry_counter); + old = rw->lock & 0x7fffffffU; + if (_raw_compare_and_swap(&rw->lock, old, old + 1) == old) + return; + } +} +EXPORT_SYMBOL(_raw_read_lock_wait); + +int +_raw_read_trylock_retry(rwlock_t *rw) +{ + unsigned int old; + int count = spin_retry; + + while (count-- > 0) { + atomic_inc(&spin_retry_counter); + old = rw->lock & 0x7fffffffU; + if (_raw_compare_and_swap(&rw->lock, old, old + 1) == old) + return 1; + } + return 0; +} +EXPORT_SYMBOL(_raw_read_trylock_retry); + +void +_raw_write_lock_wait(rwlock_t *rw) +{ + int count = spin_retry; + + while (1) { + if (count-- <= 0) { + _diag44(); + count = spin_retry; + } + atomic_inc(&spin_retry_counter); + if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0) + return; + } +} +EXPORT_SYMBOL(_raw_write_lock_wait); + +int +_raw_write_trylock_retry(rwlock_t *rw) +{ + int count = spin_retry; + + while (count-- > 0) { + atomic_inc(&spin_retry_counter); + if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0) + return 1; + } + return 0; +} +EXPORT_SYMBOL(_raw_write_trylock_retry); diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c index 648deed17e25..c5348108ca3c 100644 --- a/arch/s390/mm/extmem.c +++ b/arch/s390/mm/extmem.c @@ -576,8 +576,8 @@ segment_save(char *name) segtype_string[seg->range[i].start & 0xff]); } sprintf(cmd2, "SAVESEG %s", name); - cpcmd(cmd1, NULL, 0); - cpcmd(cmd2, NULL, 0); + cpcmd(cmd1, NULL, 0, NULL); + cpcmd(cmd2, NULL, 0, NULL); spin_unlock(&dcss_lock); } diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 3468d5127223..adc8109f8b77 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -486,7 +486,7 @@ config CPU_SUBTYPE_ST40 depends on CPU_SUBTYPE_ST40STB1 || CPU_SUBTYPE_ST40GX1 default y -config DISCONTIGMEM +config ARCH_DISCONTIGMEM_ENABLE bool depends on SH_HP690 default y @@ -496,6 +496,8 @@ config DISCONTIGMEM or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa> for more. +source "mm/Kconfig" + config ZERO_PAGE_OFFSET hex "Zero page offset" default "0x00001000" if !(SH_MPC1211 || SH_SH03) @@ -782,6 +784,8 @@ config EMBEDDED_RAMDISK_IMAGE endmenu +source "net/Kconfig" + source "drivers/Kconfig" source "fs/Kconfig" diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 3d024590c24e..6dce9d0b81f8 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -80,8 +80,6 @@ void machine_restart(char * __unused) "mov.l @%1, %0" : : "r" (0x10000000), "r" (0x80000001)); } -EXPORT_SYMBOL(machine_restart); - void machine_halt(void) { #if defined(CONFIG_SH_HS7751RVOIP) @@ -96,8 +94,6 @@ void machine_halt(void) cpu_sleep(); } -EXPORT_SYMBOL(machine_halt); - void machine_power_off(void) { #if defined(CONFIG_SH_HS7751RVOIP) @@ -110,8 +106,6 @@ void machine_power_off(void) #endif } -EXPORT_SYMBOL(machine_power_off); - void show_regs(struct pt_regs * regs) { printk("\n"); diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c index 06f1b47eded9..8022243f0178 100644 --- a/arch/sh/kernel/signal.c +++ b/arch/sh/kernel/signal.c @@ -579,7 +579,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) if (!user_mode(regs)) return 1; - if (try_to_freeze(0)) + if (try_to_freeze()) goto no_signal; if (!oldset) diff --git a/arch/sh64/Kconfig b/arch/sh64/Kconfig index 76eb81fba45e..4c3e5334adb3 100644 --- a/arch/sh64/Kconfig +++ b/arch/sh64/Kconfig @@ -217,6 +217,8 @@ config PREEMPT bool "Preemptible Kernel (EXPERIMENTAL)" depends on EXPERIMENTAL +source "mm/Kconfig" + endmenu menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" @@ -266,6 +268,8 @@ source "fs/Kconfig.binfmt" endmenu +source "net/Kconfig" + source "drivers/Kconfig" source "fs/Kconfig" diff --git a/arch/sh64/kernel/signal.c b/arch/sh64/kernel/signal.c index 45ad1026dde7..c6a14a87c59b 100644 --- a/arch/sh64/kernel/signal.c +++ b/arch/sh64/kernel/signal.c @@ -697,7 +697,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) if (!user_mode(regs)) return 1; - if (try_to_freeze(0)) + if (try_to_freeze()) goto no_signal; if (!oldset) diff --git a/arch/sh64/mm/fault.c b/arch/sh64/mm/fault.c index a24932881dbb..f08d0eaf6497 100644 --- a/arch/sh64/mm/fault.c +++ b/arch/sh64/mm/fault.c @@ -223,13 +223,13 @@ good_area: */ survive: switch (handle_mm_fault(mm, vma, address, writeaccess)) { - case 1: + case VM_FAULT_MINOR: tsk->min_flt++; break; - case 2: + case VM_FAULT_MAJOR: tsk->maj_flt++; break; - case 0: + case VM_FAULT_SIGBUS: goto do_sigbus; default: goto out_of_memory; diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 237f922520fd..aca028aa29bf 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -264,66 +264,18 @@ config SUNOS_EMUL want to run SunOS binaries on an Ultra you must also say Y to "Kernel support for 32-bit a.out binaries" above. -source "drivers/parport/Kconfig" - -config PRINTER - tristate "Parallel printer support" - depends on PARPORT - ---help--- - If you intend to attach a printer to the parallel port of your Linux - box (as opposed to using a serial printer; if the connector at the - printer has 9 or 25 holes ["female"], then it's serial), say Y. - Also read the Printing-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - It is possible to share one parallel port among several devices - (e.g. printer and ZIP drive) and it is safe to compile the - corresponding drivers into the kernel. If you want to compile this - driver as a module however, choose M here and read - <file:Documentation/parport.txt>. The module will be called lp. - - If you have several parallel ports, you can specify which ports to - use with the "lp" kernel command line option. (Try "man bootparam" - or see the documentation of your boot loader (silo) about how to pass - options to the kernel at boot time.) The syntax of the "lp" command - line option can be found in <file:drivers/char/lp.c>. - - If you have more than 8 printers, you need to increase the LP_NO - macro in lp.c and the PARPORT_MAX macro in parport.h. +source "mm/Kconfig" endmenu -source "drivers/base/Kconfig" - -source "drivers/video/Kconfig" - -source "drivers/mtd/Kconfig" +source "net/Kconfig" -source "drivers/serial/Kconfig" +source "drivers/Kconfig" if !SUN4 source "drivers/sbus/char/Kconfig" endif -source "drivers/block/Kconfig" - -# Don't frighten a common SBus user -if PCI - -source "drivers/ide/Kconfig" - -endif - -source "drivers/isdn/Kconfig" - -source "drivers/scsi/Kconfig" - -source "drivers/fc4/Kconfig" - -source "drivers/md/Kconfig" - -source "net/Kconfig" - # This one must be before the filesystem configs. -DaveM menu "Unix98 PTY support" @@ -372,18 +324,8 @@ config UNIX98_PTY_COUNT endmenu -source "drivers/input/Kconfig" - source "fs/Kconfig" -source "sound/Kconfig" - -source "drivers/usb/Kconfig" - -source "drivers/infiniband/Kconfig" - -source "drivers/char/watchdog/Kconfig" - source "arch/sparc/Kconfig.debug" source "security/Kconfig" diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c index 2c216ffeea90..29e72b57d4fd 100644 --- a/arch/sparc/kernel/process.c +++ b/arch/sparc/kernel/process.c @@ -158,8 +158,6 @@ void machine_halt(void) panic("Halt failed!"); } -EXPORT_SYMBOL(machine_halt); - void machine_restart(char * cmd) { char *p; @@ -180,8 +178,6 @@ void machine_restart(char * cmd) panic("Reboot failed!"); } -EXPORT_SYMBOL(machine_restart); - void machine_power_off(void) { #ifdef CONFIG_SUN_AUXIO @@ -191,8 +187,6 @@ void machine_power_off(void) machine_halt(); } -EXPORT_SYMBOL(machine_power_off); - static DEFINE_SPINLOCK(sparc_backtrace_lock); void __show_backtrace(unsigned long fp) diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S index 928ffeb0fabb..e457a40838fc 100644 --- a/arch/sparc/kernel/systbls.S +++ b/arch/sparc/kernel/systbls.S @@ -48,8 +48,8 @@ sys_call_table: /*135*/ .long sys_nis_syscall, sys_mkdir, sys_rmdir, sys_utimes, sys_stat64 /*140*/ .long sys_sendfile64, sys_nis_syscall, sys_futex, sys_gettid, sys_getrlimit /*145*/ .long sys_setrlimit, sys_pivot_root, sys_prctl, sys_pciconfig_read, sys_pciconfig_write -/*150*/ .long sys_nis_syscall, sys_nis_syscall, sys_nis_syscall, sys_poll, sys_getdents64 -/*155*/ .long sys_fcntl64, sys_ni_syscall, sys_statfs, sys_fstatfs, sys_oldumount +/*150*/ .long sys_nis_syscall, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64 +/*155*/ .long sys_fcntl64, sys_inotify_rm_watch, sys_statfs, sys_fstatfs, sys_oldumount /*160*/ .long sys_sched_setaffinity, sys_sched_getaffinity, sys_getdomainname, sys_setdomainname, sys_nis_syscall /*165*/ .long sys_quotactl, sys_set_tid_address, sys_mount, sys_ustat, sys_setxattr /*170*/ .long sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents @@ -57,11 +57,11 @@ sys_call_table: /*180*/ .long sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_sigpending, sys_ni_syscall /*185*/ .long sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_newuname /*190*/ .long sys_init_module, sys_personality, sparc_remap_file_pages, sys_epoll_create, sys_epoll_ctl -/*195*/ .long sys_epoll_wait, sys_nis_syscall, sys_getppid, sparc_sigaction, sys_sgetmask +/*195*/ .long sys_epoll_wait, sys_ioprio_set, sys_getppid, sparc_sigaction, sys_sgetmask /*200*/ .long sys_ssetmask, sys_sigsuspend, sys_newlstat, sys_uselib, old_readdir /*205*/ .long sys_readahead, sys_socketcall, sys_syslog, sys_lookup_dcookie, sys_fadvise64 /*210*/ .long sys_fadvise64_64, sys_tgkill, sys_waitpid, sys_swapoff, sys_sysinfo -/*215*/ .long sys_ipc, sys_sigreturn, sys_clone, sys_nis_syscall, sys_adjtimex +/*215*/ .long sys_ipc, sys_sigreturn, sys_clone, sys_ioprio_get, sys_adjtimex /*220*/ .long sys_sigprocmask, sys_ni_syscall, sys_delete_module, sys_ni_syscall, sys_getpgid /*225*/ .long sys_bdflush, sys_sysfs, sys_nis_syscall, sys_setfsuid16, sys_setfsgid16 /*230*/ .long sys_select, sys_time, sys_nis_syscall, sys_stime, sys_statfs64 diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index a72fd15d5ea8..9afd28e2c4d5 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -43,6 +43,25 @@ config SPARC64_PAGE_SIZE_4MB endchoice +config SECCOMP + bool "Enable seccomp to safely compute untrusted bytecode" + depends on PROC_FS + default y + help + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via /proc/<pid>/seccomp, it cannot be disabled + and the task is only allowed to execute a few safe syscalls + defined by each seccomp mode. + + If unsure, say Y. Only embedded should say N here. + +source kernel/Kconfig.hz + source "init/Kconfig" config SYSVIPC_COMPAT @@ -444,6 +463,24 @@ config PRINTER If you have more than 8 printers, you need to increase the LP_NO macro in lp.c and the PARPORT_MAX macro in parport.h. +config PPDEV + tristate "Support for user-space parallel port device drivers" + depends on PARPORT + ---help--- + Saying Y to this adds support for /dev/parport device nodes. This + is needed for programs that want portable access to the parallel + port, for instance deviceid (which displays Plug-and-Play device + IDs). + + This is the parallel port equivalent of SCSI generic support (sg). + It is safe to say N to this -- it is not needed for normal printing + or parallel port CD-ROM/disk support. + + To compile this driver as a module, choose M here: the + module will be called ppdev. + + If unsure, say N. + config ENVCTRL tristate "SUNW, envctrl support" depends on PCI @@ -484,8 +521,12 @@ config CMDLINE NOTE: This option WILL override the PROM bootargs setting! +source "mm/Kconfig" + endmenu +source "net/Kconfig" + source "drivers/base/Kconfig" source "drivers/video/Kconfig" @@ -512,7 +553,7 @@ endif source "drivers/ieee1394/Kconfig" -source "net/Kconfig" +source "drivers/net/Kconfig" source "drivers/isdn/Kconfig" @@ -608,6 +649,8 @@ source "drivers/input/Kconfig" source "drivers/i2c/Kconfig" +source "drivers/hwmon/Kconfig" + source "fs/Kconfig" source "drivers/media/Kconfig" diff --git a/arch/sparc64/kernel/auxio.c b/arch/sparc64/kernel/auxio.c index a0716ccc2f4a..8852c20c8d99 100644 --- a/arch/sparc64/kernel/auxio.c +++ b/arch/sparc64/kernel/auxio.c @@ -16,7 +16,7 @@ #include <asm/ebus.h> #include <asm/auxio.h> -/* This cannot be static, as it is referenced in entry.S */ +/* This cannot be static, as it is referenced in irq.c */ void __iomem *auxio_register = NULL; enum auxio_type { diff --git a/arch/sparc64/kernel/dtlb_backend.S b/arch/sparc64/kernel/dtlb_backend.S index b73a3c858770..538522848ad4 100644 --- a/arch/sparc64/kernel/dtlb_backend.S +++ b/arch/sparc64/kernel/dtlb_backend.S @@ -16,7 +16,7 @@ #elif PAGE_SHIFT == 19 #define SZ_BITS _PAGE_SZ512K #elif PAGE_SHIFT == 22 -#define SZ_BITS _PAGE_SZ4M +#define SZ_BITS _PAGE_SZ4MB #endif #define VALID_SZ_BITS (_PAGE_VALID | SZ_BITS) diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index a47f2d0b1a29..88332f00094a 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -22,8 +22,6 @@ #include <asm/estate.h> #include <asm/auxio.h> -/* #define SYSCALL_TRACING 1 */ - #define curptr g6 #define NR_SYSCALLS 284 /* Each OS is different... */ @@ -271,8 +269,9 @@ cplus_fptrap_insn_1: fmuld %f0, %f2, %f26 faddd %f0, %f2, %f28 fmuld %f0, %f2, %f30 + membar #Sync b,pt %xcc, fpdis_exit - membar #Sync + nop 2: andcc %g5, FPRS_DU, %g0 bne,pt %icc, 3f fzero %f32 @@ -301,8 +300,9 @@ cplus_fptrap_insn_2: fmuld %f32, %f34, %f58 faddd %f32, %f34, %f60 fmuld %f32, %f34, %f62 + membar #Sync ba,pt %xcc, fpdis_exit - membar #Sync + nop 3: mov SECONDARY_CONTEXT, %g3 add %g6, TI_FPREGS, %g1 ldxa [%g3] ASI_DMMU, %g5 @@ -551,13 +551,11 @@ do_ivec: sllx %g3, 5, %g3 or %g2, %lo(ivector_table), %g2 add %g2, %g3, %g3 - ldx [%g3 + 0x08], %g2 /* irq_info */ ldub [%g3 + 0x04], %g4 /* pil */ - brz,pn %g2, do_ivec_spurious - mov 1, %g2 - + mov 1, %g2 sllx %g2, %g4, %g2 sllx %g4, 2, %g4 + lduw [%g6 + %g4], %g5 /* g5 = irq_work(cpu, pil) */ stw %g5, [%g3 + 0x00] /* bucket->irq_chain = g5 */ stw %g3, [%g6 + %g4] /* irq_work(cpu, pil) = bucket */ @@ -565,9 +563,9 @@ do_ivec: retry do_ivec_xcall: mov 0x50, %g1 - ldxa [%g1 + %g0] ASI_INTR_R, %g1 srl %g3, 0, %g3 + mov 0x60, %g7 ldxa [%g7 + %g0] ASI_INTR_R, %g7 stxa %g0, [%g0] ASI_INTR_RECEIVE @@ -579,19 +577,6 @@ do_ivec_xcall: 1: jmpl %g3, %g0 nop -do_ivec_spurious: - stw %g3, [%g6 + 0x00] /* irq_work(cpu, 0) = bucket */ - rdpr %pstate, %g5 - - wrpr %g5, PSTATE_IG | PSTATE_AG, %pstate - sethi %hi(109f), %g7 - ba,pt %xcc, etrap -109: or %g7, %lo(109b), %g7 - call catch_disabled_ivec - add %sp, PTREGS_OFF, %o0 - ba,pt %xcc, rtrap - clr %l6 - .globl save_alternate_globals save_alternate_globals: /* %o0 = save_area */ rdpr %pstate, %o5 @@ -699,116 +684,6 @@ utrap_ill: ba,pt %xcc, rtrap clr %l6 -#ifdef CONFIG_BLK_DEV_FD - .globl floppy_hardint -floppy_hardint: - wr %g0, (1 << 11), %clear_softint - sethi %hi(doing_pdma), %g1 - ld [%g1 + %lo(doing_pdma)], %g2 - brz,pn %g2, floppy_dosoftint - sethi %hi(fdc_status), %g3 - ldx [%g3 + %lo(fdc_status)], %g3 - sethi %hi(pdma_vaddr), %g5 - ldx [%g5 + %lo(pdma_vaddr)], %g4 - sethi %hi(pdma_size), %g5 - ldx [%g5 + %lo(pdma_size)], %g5 - -next_byte: - lduba [%g3] ASI_PHYS_BYPASS_EC_E, %g7 - andcc %g7, 0x80, %g0 - be,pn %icc, floppy_fifo_emptied - andcc %g7, 0x20, %g0 - be,pn %icc, floppy_overrun - andcc %g7, 0x40, %g0 - be,pn %icc, floppy_write - sub %g5, 1, %g5 - - inc %g3 - lduba [%g3] ASI_PHYS_BYPASS_EC_E, %g7 - dec %g3 - orcc %g0, %g5, %g0 - stb %g7, [%g4] - bne,pn %xcc, next_byte - add %g4, 1, %g4 - - b,pt %xcc, floppy_tdone - nop - -floppy_write: - ldub [%g4], %g7 - orcc %g0, %g5, %g0 - inc %g3 - stba %g7, [%g3] ASI_PHYS_BYPASS_EC_E - dec %g3 - bne,pn %xcc, next_byte - add %g4, 1, %g4 - -floppy_tdone: - sethi %hi(pdma_vaddr), %g1 - stx %g4, [%g1 + %lo(pdma_vaddr)] - sethi %hi(pdma_size), %g1 - stx %g5, [%g1 + %lo(pdma_size)] - sethi %hi(auxio_register), %g1 - ldx [%g1 + %lo(auxio_register)], %g7 - lduba [%g7] ASI_PHYS_BYPASS_EC_E, %g5 - or %g5, AUXIO_AUX1_FTCNT, %g5 -/* andn %g5, AUXIO_AUX1_MASK, %g5 */ - stba %g5, [%g7] ASI_PHYS_BYPASS_EC_E - andn %g5, AUXIO_AUX1_FTCNT, %g5 -/* andn %g5, AUXIO_AUX1_MASK, %g5 */ - - nop; nop; nop; nop; nop; nop; - nop; nop; nop; nop; nop; nop; - - stba %g5, [%g7] ASI_PHYS_BYPASS_EC_E - sethi %hi(doing_pdma), %g1 - b,pt %xcc, floppy_dosoftint - st %g0, [%g1 + %lo(doing_pdma)] - -floppy_fifo_emptied: - sethi %hi(pdma_vaddr), %g1 - stx %g4, [%g1 + %lo(pdma_vaddr)] - sethi %hi(pdma_size), %g1 - stx %g5, [%g1 + %lo(pdma_size)] - sethi %hi(irq_action), %g1 - or %g1, %lo(irq_action), %g1 - ldx [%g1 + (11 << 3)], %g3 ! irqaction[floppy_irq] - ldx [%g3 + 0x08], %g4 ! action->flags>>48==ino - sethi %hi(ivector_table), %g3 - srlx %g4, 48, %g4 - or %g3, %lo(ivector_table), %g3 - sllx %g4, 5, %g4 - ldx [%g3 + %g4], %g4 ! &ivector_table[ino] - ldx [%g4 + 0x10], %g4 ! bucket->iclr - stwa %g0, [%g4] ASI_PHYS_BYPASS_EC_E ! ICLR_IDLE - membar #Sync ! probably not needed... - retry - -floppy_overrun: - sethi %hi(pdma_vaddr), %g1 - stx %g4, [%g1 + %lo(pdma_vaddr)] - sethi %hi(pdma_size), %g1 - stx %g5, [%g1 + %lo(pdma_size)] - sethi %hi(doing_pdma), %g1 - st %g0, [%g1 + %lo(doing_pdma)] - -floppy_dosoftint: - rdpr %pil, %g2 - wrpr %g0, 15, %pil - sethi %hi(109f), %g7 - b,pt %xcc, etrap_irq -109: or %g7, %lo(109b), %g7 - - mov 11, %o0 - mov 0, %o1 - call sparc_floppy_irq - add %sp, PTREGS_OFF, %o2 - - b,pt %xcc, rtrap_irq - nop - -#endif /* CONFIG_BLK_DEV_FD */ - /* XXX Here is stuff we still need to write... -DaveM XXX */ .globl netbsd_syscall netbsd_syscall: @@ -1677,11 +1552,12 @@ sys_ptrace: add %sp, PTREGS_OFF, %o0 nop .align 32 1: ldx [%curptr + TI_FLAGS], %l5 - andcc %l5, _TIF_SYSCALL_TRACE, %g0 + andcc %l5, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT), %g0 be,pt %icc, rtrap clr %l6 + add %sp, PTREGS_OFF, %o0 call syscall_trace - nop + mov 1, %o1 ba,pt %xcc, rtrap clr %l6 @@ -1724,11 +1600,11 @@ sys_clone: flushw ba,pt %xcc, sparc_do_fork add %sp, PTREGS_OFF, %o2 ret_from_syscall: - /* Clear SPARC_FLAG_NEWCHILD, switch_to leaves thread.flags in - * %o7 for us. Check performance counter stuff too. + /* Clear current_thread_info()->new_child, and + * check performance counter stuff too. */ - andn %o7, _TIF_NEWCHILD, %l0 - stx %l0, [%g6 + TI_FLAGS] + stb %g0, [%g6 + TI_NEW_CHILD] + ldx [%g6 + TI_FLAGS], %l0 call schedule_tail mov %g7, %o0 andcc %l0, _TIF_PERFCTR, %g0 @@ -1765,18 +1641,20 @@ linux_sparc_ni_syscall: or %l7, %lo(sys_ni_syscall), %l7 linux_syscall_trace32: + add %sp, PTREGS_OFF, %o0 call syscall_trace - nop + clr %o1 srl %i0, 0, %o0 - mov %i4, %o4 + srl %i4, 0, %o4 srl %i1, 0, %o1 srl %i2, 0, %o2 b,pt %xcc, 2f srl %i3, 0, %o3 linux_syscall_trace: + add %sp, PTREGS_OFF, %o0 call syscall_trace - nop + clr %o1 mov %i0, %o0 mov %i1, %o1 mov %i2, %o2 @@ -1794,11 +1672,6 @@ linux_sparc_syscall32: bgeu,pn %xcc, linux_sparc_ni_syscall ! CTI srl %i0, 0, %o0 ! IEU0 sll %g1, 2, %l4 ! IEU0 Group -#ifdef SYSCALL_TRACING - call syscall_trace_entry - add %sp, PTREGS_OFF, %o0 - srl %i0, 0, %o0 -#endif srl %i4, 0, %o4 ! IEU1 lduw [%l7 + %l4], %l7 ! Load srl %i1, 0, %o1 ! IEU0 Group @@ -1806,7 +1679,7 @@ linux_sparc_syscall32: srl %i5, 0, %o5 ! IEU1 srl %i2, 0, %o2 ! IEU0 Group - andcc %l0, _TIF_SYSCALL_TRACE, %g0 ! IEU0 Group + andcc %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT), %g0 bne,pn %icc, linux_syscall_trace32 ! CTI mov %i0, %l5 ! IEU1 call %l7 ! CTI Group brk forced @@ -1822,11 +1695,6 @@ linux_sparc_syscall: bgeu,pn %xcc, linux_sparc_ni_syscall ! CTI mov %i0, %o0 ! IEU0 sll %g1, 2, %l4 ! IEU0 Group -#ifdef SYSCALL_TRACING - call syscall_trace_entry - add %sp, PTREGS_OFF, %o0 - mov %i0, %o0 -#endif mov %i1, %o1 ! IEU1 lduw [%l7 + %l4], %l7 ! Load 4: mov %i2, %o2 ! IEU0 Group @@ -1834,7 +1702,7 @@ linux_sparc_syscall: mov %i3, %o3 ! IEU1 mov %i4, %o4 ! IEU0 Group - andcc %l0, _TIF_SYSCALL_TRACE, %g0 ! IEU1 Group+1 bubble + andcc %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT), %g0 bne,pn %icc, linux_syscall_trace ! CTI Group mov %i0, %l5 ! IEU0 2: call %l7 ! CTI Group brk forced @@ -1843,12 +1711,6 @@ linux_sparc_syscall: 3: stx %o0, [%sp + PTREGS_OFF + PT_V9_I0] ret_sys_call: -#ifdef SYSCALL_TRACING - mov %o0, %o1 - call syscall_trace_exit - add %sp, PTREGS_OFF, %o0 - mov %o1, %o0 -#endif ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %g3 ldx [%sp + PTREGS_OFF + PT_V9_TNPC], %l1 ! pc = npc sra %o0, 0, %o0 @@ -1858,17 +1720,16 @@ ret_sys_call: /* Check if force_successful_syscall_return() * was invoked. */ - ldx [%curptr + TI_FLAGS], %l0 - andcc %l0, _TIF_SYSCALL_SUCCESS, %g0 - be,pt %icc, 1f - andn %l0, _TIF_SYSCALL_SUCCESS, %l0 + ldub [%curptr + TI_SYS_NOERROR], %l0 + brz,pt %l0, 1f + nop ba,pt %xcc, 80f - stx %l0, [%curptr + TI_FLAGS] + stb %g0, [%curptr + TI_SYS_NOERROR] 1: cmp %o0, -ERESTART_RESTARTBLOCK bgeu,pn %xcc, 1f - andcc %l0, _TIF_SYSCALL_TRACE, %l6 + andcc %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT), %l6 80: /* System call success, clear Carry condition code. */ andn %g3, %g2, %g3 @@ -1883,7 +1744,7 @@ ret_sys_call: /* System call failure, set Carry condition code. * Also, get abs(errno) to return to the process. */ - andcc %l0, _TIF_SYSCALL_TRACE, %l6 + andcc %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT), %l6 sub %g0, %o0, %o0 or %g3, %g2, %g3 stx %o0, [%sp + PTREGS_OFF + PT_V9_I0] @@ -1896,8 +1757,9 @@ ret_sys_call: b,pt %xcc, rtrap stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC] linux_syscall_trace2: + add %sp, PTREGS_OFF, %o0 call syscall_trace - nop + mov 1, %o1 stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC] ba,pt %xcc, rtrap stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC] diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 4dcb8af94090..c9b69167632a 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -37,6 +37,7 @@ #include <asm/uaccess.h> #include <asm/cache.h> #include <asm/cpudata.h> +#include <asm/auxio.h> #ifdef CONFIG_SMP static void distribute_irqs(void); @@ -70,31 +71,7 @@ struct irq_work_struct { struct irq_work_struct __irq_work[NR_CPUS]; #define irq_work(__cpu, __pil) &(__irq_work[(__cpu)].irq_worklists[(__pil)]) -#ifdef CONFIG_PCI -/* This is a table of physical addresses used to deal with IBF_DMA_SYNC. - * It is used for PCI only to synchronize DMA transfers with IRQ delivery - * for devices behind busses other than APB on Sabre systems. - * - * Currently these physical addresses are just config space accesses - * to the command register for that device. - */ -unsigned long pci_dma_wsync; -unsigned long dma_sync_reg_table[256]; -unsigned char dma_sync_reg_table_entry = 0; -#endif - -/* This is based upon code in the 32-bit Sparc kernel written mostly by - * David Redman (djhr@tadpole.co.uk). - */ -#define MAX_STATIC_ALLOC 4 -static struct irqaction static_irqaction[MAX_STATIC_ALLOC]; -static int static_irq_count; - -/* This is exported so that fast IRQ handlers can get at it... -DaveM */ -struct irqaction *irq_action[NR_IRQS+1] = { - NULL, NULL, NULL, NULL, NULL, NULL , NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL , NULL, NULL -}; +static struct irqaction *irq_action[NR_IRQS+1]; /* This only synchronizes entities which modify IRQ handler * state and some selected user-level spots that want to @@ -240,17 +217,22 @@ void disable_irq(unsigned int irq) * the CPU %tick register and not by some normal vectored interrupt * source. To handle this special case, we use this dummy INO bucket. */ +static struct irq_desc pil0_dummy_desc; static struct ino_bucket pil0_dummy_bucket = { - 0, /* irq_chain */ - 0, /* pil */ - 0, /* pending */ - 0, /* flags */ - 0, /* __unused */ - NULL, /* irq_info */ - 0UL, /* iclr */ - 0UL, /* imap */ + .irq_info = &pil0_dummy_desc, }; +static void build_irq_error(const char *msg, unsigned int ino, int pil, int inofixup, + unsigned long iclr, unsigned long imap, + struct ino_bucket *bucket) +{ + prom_printf("IRQ: INO %04x (%d:%016lx:%016lx) --> " + "(%d:%d:%016lx:%016lx), halting...\n", + ino, bucket->pil, bucket->iclr, bucket->imap, + pil, inofixup, iclr, imap); + prom_halt(); +} + unsigned int build_irq(int pil, int inofixup, unsigned long iclr, unsigned long imap) { struct ino_bucket *bucket; @@ -279,28 +261,35 @@ unsigned int build_irq(int pil, int inofixup, unsigned long iclr, unsigned long prom_halt(); } - /* Ok, looks good, set it up. Don't touch the irq_chain or - * the pending flag. - */ bucket = &ivector_table[ino]; - if ((bucket->flags & IBF_ACTIVE) || - (bucket->irq_info != NULL)) { - /* This is a gross fatal error if it happens here. */ - prom_printf("IRQ: Trying to reinit INO bucket, fatal error.\n"); - prom_printf("IRQ: Request INO %04x (%d:%d:%016lx:%016lx)\n", - ino, pil, inofixup, iclr, imap); - prom_printf("IRQ: Existing (%d:%016lx:%016lx)\n", - bucket->pil, bucket->iclr, bucket->imap); - prom_printf("IRQ: Cannot continue, halting...\n"); + if (bucket->flags & IBF_ACTIVE) + build_irq_error("IRQ: Trying to build active INO bucket.\n", + ino, pil, inofixup, iclr, imap, bucket); + + if (bucket->irq_info) { + if (bucket->imap != imap || bucket->iclr != iclr) + build_irq_error("IRQ: Trying to reinit INO bucket.\n", + ino, pil, inofixup, iclr, imap, bucket); + + goto out; + } + + bucket->irq_info = kmalloc(sizeof(struct irq_desc), GFP_ATOMIC); + if (!bucket->irq_info) { + prom_printf("IRQ: Error, kmalloc(irq_desc) failed.\n"); prom_halt(); } + memset(bucket->irq_info, 0, sizeof(struct irq_desc)); + + /* Ok, looks good, set it up. Don't touch the irq_chain or + * the pending flag. + */ bucket->imap = imap; bucket->iclr = iclr; bucket->pil = pil; bucket->flags = 0; - bucket->irq_info = NULL; - +out: return __irq(bucket); } @@ -318,26 +307,65 @@ static void atomic_bucket_insert(struct ino_bucket *bucket) __asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate)); } +static int check_irq_sharing(int pil, unsigned long irqflags) +{ + struct irqaction *action, *tmp; + + action = *(irq_action + pil); + if (action) { + if ((action->flags & SA_SHIRQ) && (irqflags & SA_SHIRQ)) { + for (tmp = action; tmp->next; tmp = tmp->next) + ; + } else { + return -EBUSY; + } + } + return 0; +} + +static void append_irq_action(int pil, struct irqaction *action) +{ + struct irqaction **pp = irq_action + pil; + + while (*pp) + pp = &((*pp)->next); + *pp = action; +} + +static struct irqaction *get_action_slot(struct ino_bucket *bucket) +{ + struct irq_desc *desc = bucket->irq_info; + int max_irq, i; + + max_irq = 1; + if (bucket->flags & IBF_PCI) + max_irq = MAX_IRQ_DESC_ACTION; + for (i = 0; i < max_irq; i++) { + struct irqaction *p = &desc->action[i]; + u32 mask = (1 << i); + + if (desc->action_active_mask & mask) + continue; + + desc->action_active_mask |= mask; + return p; + } + return NULL; +} + int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *), unsigned long irqflags, const char *name, void *dev_id) { - struct irqaction *action, *tmp = NULL; + struct irqaction *action; struct ino_bucket *bucket = __bucket(irq); unsigned long flags; int pending = 0; - if ((bucket != &pil0_dummy_bucket) && - (bucket < &ivector_table[0] || - bucket >= &ivector_table[NUM_IVECS])) { - unsigned int *caller; - - __asm__ __volatile__("mov %%i7, %0" : "=r" (caller)); - printk(KERN_CRIT "request_irq: Old style IRQ registry attempt " - "from %p, irq %08x.\n", caller, irq); + if (unlikely(!handler)) return -EINVAL; - } - if (!handler) - return -EINVAL; + + if (unlikely(!bucket->irq_info)) + return -ENODEV; if ((bucket != &pil0_dummy_bucket) && (irqflags & SA_SAMPLE_RANDOM)) { /* @@ -355,93 +383,20 @@ int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_ spin_lock_irqsave(&irq_action_lock, flags); - action = *(bucket->pil + irq_action); - if (action) { - if ((action->flags & SA_SHIRQ) && (irqflags & SA_SHIRQ)) - for (tmp = action; tmp->next; tmp = tmp->next) - ; - else { - spin_unlock_irqrestore(&irq_action_lock, flags); - return -EBUSY; - } - action = NULL; /* Or else! */ + if (check_irq_sharing(bucket->pil, irqflags)) { + spin_unlock_irqrestore(&irq_action_lock, flags); + return -EBUSY; } - /* If this is flagged as statically allocated then we use our - * private struct which is never freed. - */ - if (irqflags & SA_STATIC_ALLOC) { - if (static_irq_count < MAX_STATIC_ALLOC) - action = &static_irqaction[static_irq_count++]; - else - printk("Request for IRQ%d (%s) SA_STATIC_ALLOC failed " - "using kmalloc\n", irq, name); - } - if (action == NULL) - action = (struct irqaction *)kmalloc(sizeof(struct irqaction), - GFP_ATOMIC); - + action = get_action_slot(bucket); if (!action) { spin_unlock_irqrestore(&irq_action_lock, flags); return -ENOMEM; } - if (bucket == &pil0_dummy_bucket) { - bucket->irq_info = action; - bucket->flags |= IBF_ACTIVE; - } else { - if ((bucket->flags & IBF_ACTIVE) != 0) { - void *orig = bucket->irq_info; - void **vector = NULL; - - if ((bucket->flags & IBF_PCI) == 0) { - printk("IRQ: Trying to share non-PCI bucket.\n"); - goto free_and_ebusy; - } - if ((bucket->flags & IBF_MULTI) == 0) { - vector = kmalloc(sizeof(void *) * 4, GFP_ATOMIC); - if (vector == NULL) - goto free_and_enomem; - - /* We might have slept. */ - if ((bucket->flags & IBF_MULTI) != 0) { - int ent; - - kfree(vector); - vector = (void **)bucket->irq_info; - for(ent = 0; ent < 4; ent++) { - if (vector[ent] == NULL) { - vector[ent] = action; - break; - } - } - if (ent == 4) - goto free_and_ebusy; - } else { - vector[0] = orig; - vector[1] = action; - vector[2] = NULL; - vector[3] = NULL; - bucket->irq_info = vector; - bucket->flags |= IBF_MULTI; - } - } else { - int ent; - - vector = (void **)orig; - for (ent = 0; ent < 4; ent++) { - if (vector[ent] == NULL) { - vector[ent] = action; - break; - } - } - if (ent == 4) - goto free_and_ebusy; - } - } else { - bucket->irq_info = action; - bucket->flags |= IBF_ACTIVE; - } + bucket->flags |= IBF_ACTIVE; + pending = 0; + if (bucket != &pil0_dummy_bucket) { pending = bucket->pending; if (pending) bucket->pending = 0; @@ -455,10 +410,7 @@ int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_ put_ino_in_irqaction(action, irq); put_smpaff_in_irqaction(action, CPU_MASK_NONE); - if (tmp) - tmp->next = action; - else - *(bucket->pil + irq_action) = action; + append_irq_action(bucket->pil, action); enable_irq(irq); @@ -467,147 +419,103 @@ int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_ atomic_bucket_insert(bucket); set_softint(1 << bucket->pil); } + spin_unlock_irqrestore(&irq_action_lock, flags); - if ((bucket != &pil0_dummy_bucket) && (!(irqflags & SA_STATIC_ALLOC))) + + if (bucket != &pil0_dummy_bucket) register_irq_proc(__irq_ino(irq)); #ifdef CONFIG_SMP distribute_irqs(); #endif return 0; - -free_and_ebusy: - kfree(action); - spin_unlock_irqrestore(&irq_action_lock, flags); - return -EBUSY; - -free_and_enomem: - kfree(action); - spin_unlock_irqrestore(&irq_action_lock, flags); - return -ENOMEM; } EXPORT_SYMBOL(request_irq); -void free_irq(unsigned int irq, void *dev_id) +static struct irqaction *unlink_irq_action(unsigned int irq, void *dev_id) { - struct irqaction *action; - struct irqaction *tmp = NULL; - unsigned long flags; - struct ino_bucket *bucket = __bucket(irq), *bp; - - if ((bucket != &pil0_dummy_bucket) && - (bucket < &ivector_table[0] || - bucket >= &ivector_table[NUM_IVECS])) { - unsigned int *caller; + struct ino_bucket *bucket = __bucket(irq); + struct irqaction *action, **pp; - __asm__ __volatile__("mov %%i7, %0" : "=r" (caller)); - printk(KERN_CRIT "free_irq: Old style IRQ removal attempt " - "from %p, irq %08x.\n", caller, irq); - return; - } - - spin_lock_irqsave(&irq_action_lock, flags); + pp = irq_action + bucket->pil; + action = *pp; + if (unlikely(!action)) + return NULL; - action = *(bucket->pil + irq_action); - if (!action->handler) { + if (unlikely(!action->handler)) { printk("Freeing free IRQ %d\n", bucket->pil); - return; - } - if (dev_id) { - for ( ; action; action = action->next) { - if (action->dev_id == dev_id) - break; - tmp = action; - } - if (!action) { - printk("Trying to free free shared IRQ %d\n", bucket->pil); - spin_unlock_irqrestore(&irq_action_lock, flags); - return; - } - } else if (action->flags & SA_SHIRQ) { - printk("Trying to free shared IRQ %d with NULL device ID\n", bucket->pil); - spin_unlock_irqrestore(&irq_action_lock, flags); - return; + return NULL; } - if (action->flags & SA_STATIC_ALLOC) { - printk("Attempt to free statically allocated IRQ %d (%s)\n", - bucket->pil, action->name); - spin_unlock_irqrestore(&irq_action_lock, flags); - return; + while (action && action->dev_id != dev_id) { + pp = &action->next; + action = *pp; } - if (action && tmp) - tmp->next = action->next; - else - *(bucket->pil + irq_action) = action->next; + if (likely(action)) + *pp = action->next; + + return action; +} + +void free_irq(unsigned int irq, void *dev_id) +{ + struct irqaction *action; + struct ino_bucket *bucket; + unsigned long flags; + + spin_lock_irqsave(&irq_action_lock, flags); + + action = unlink_irq_action(irq, dev_id); spin_unlock_irqrestore(&irq_action_lock, flags); + if (unlikely(!action)) + return; + synchronize_irq(irq); spin_lock_irqsave(&irq_action_lock, flags); + bucket = __bucket(irq); if (bucket != &pil0_dummy_bucket) { + struct irq_desc *desc = bucket->irq_info; unsigned long imap = bucket->imap; - void **vector, *orig; - int ent; - - orig = bucket->irq_info; - vector = (void **)orig; - - if ((bucket->flags & IBF_MULTI) != 0) { - int other = 0; - void *orphan = NULL; - for (ent = 0; ent < 4; ent++) { - if (vector[ent] == action) - vector[ent] = NULL; - else if (vector[ent] != NULL) { - orphan = vector[ent]; - other++; - } - } + int ent, i; - /* Only free when no other shared irq - * uses this bucket. - */ - if (other) { - if (other == 1) { - /* Convert back to non-shared bucket. */ - bucket->irq_info = orphan; - bucket->flags &= ~(IBF_MULTI); - kfree(vector); - } - goto out; + for (i = 0; i < MAX_IRQ_DESC_ACTION; i++) { + struct irqaction *p = &desc->action[i]; + + if (p == action) { + desc->action_active_mask &= ~(1 << i); + break; } - } else { - bucket->irq_info = NULL; } - /* This unique interrupt source is now inactive. */ - bucket->flags &= ~IBF_ACTIVE; + if (!desc->action_active_mask) { + /* This unique interrupt source is now inactive. */ + bucket->flags &= ~IBF_ACTIVE; - /* See if any other buckets share this bucket's IMAP - * and are still active. - */ - for (ent = 0; ent < NUM_IVECS; ent++) { - bp = &ivector_table[ent]; - if (bp != bucket && - bp->imap == imap && - (bp->flags & IBF_ACTIVE) != 0) - break; - } + /* See if any other buckets share this bucket's IMAP + * and are still active. + */ + for (ent = 0; ent < NUM_IVECS; ent++) { + struct ino_bucket *bp = &ivector_table[ent]; + if (bp != bucket && + bp->imap == imap && + (bp->flags & IBF_ACTIVE) != 0) + break; + } - /* Only disable when no other sub-irq levels of - * the same IMAP are active. - */ - if (ent == NUM_IVECS) - disable_irq(irq); + /* Only disable when no other sub-irq levels of + * the same IMAP are active. + */ + if (ent == NUM_IVECS) + disable_irq(irq); + } } -out: - kfree(action); spin_unlock_irqrestore(&irq_action_lock, flags); } @@ -646,99 +554,55 @@ void synchronize_irq(unsigned int irq) } #endif /* CONFIG_SMP */ -void catch_disabled_ivec(struct pt_regs *regs) +static void process_bucket(int irq, struct ino_bucket *bp, struct pt_regs *regs) { - int cpu = smp_processor_id(); - struct ino_bucket *bucket = __bucket(*irq_work(cpu, 0)); + struct irq_desc *desc = bp->irq_info; + unsigned char flags = bp->flags; + u32 action_mask, i; + int random; - /* We can actually see this on Ultra/PCI PCI cards, which are bridges - * to other devices. Here a single IMAP enabled potentially multiple - * unique interrupt sources (which each do have a unique ICLR register. - * - * So what we do is just register that the IVEC arrived, when registered - * for real the request_irq() code will check the bit and signal - * a local CPU interrupt for it. - */ -#if 0 - printk("IVEC: Spurious interrupt vector (%x) received at (%016lx)\n", - bucket - &ivector_table[0], regs->tpc); -#endif - *irq_work(cpu, 0) = 0; - bucket->pending = 1; -} + bp->flags |= IBF_INPROGRESS; -/* Tune this... */ -#define FORWARD_VOLUME 12 - -#ifdef CONFIG_SMP - -static inline void redirect_intr(int cpu, struct ino_bucket *bp) -{ - /* Ok, here is what is going on: - * 1) Retargeting IRQs on Starfire is very - * expensive so just forget about it on them. - * 2) Moving around very high priority interrupts - * is a losing game. - * 3) If the current cpu is idle, interrupts are - * useful work, so keep them here. But do not - * pass to our neighbour if he is not very idle. - * 4) If sysadmin explicitly asks for directed intrs, - * Just Do It. - */ - struct irqaction *ap = bp->irq_info; - cpumask_t cpu_mask; - unsigned int buddy, ticks; - - cpu_mask = get_smpaff_in_irqaction(ap); - cpus_and(cpu_mask, cpu_mask, cpu_online_map); - if (cpus_empty(cpu_mask)) - cpu_mask = cpu_online_map; - - if (this_is_starfire != 0 || - bp->pil >= 10 || current->pid == 0) + if (unlikely(!(flags & IBF_ACTIVE))) { + bp->pending = 1; goto out; - - /* 'cpu' is the MID (ie. UPAID), calculate the MID - * of our buddy. - */ - buddy = cpu + 1; - if (buddy >= NR_CPUS) - buddy = 0; - - ticks = 0; - while (!cpu_isset(buddy, cpu_mask)) { - if (++buddy >= NR_CPUS) - buddy = 0; - if (++ticks > NR_CPUS) { - put_smpaff_in_irqaction(ap, CPU_MASK_NONE); - goto out; - } } - if (buddy == cpu) - goto out; + if (desc->pre_handler) + desc->pre_handler(bp, + desc->pre_handler_arg1, + desc->pre_handler_arg2); - /* Voo-doo programming. */ - if (cpu_data(buddy).idle_volume < FORWARD_VOLUME) - goto out; + action_mask = desc->action_active_mask; + random = 0; + for (i = 0; i < MAX_IRQ_DESC_ACTION; i++) { + struct irqaction *p = &desc->action[i]; + u32 mask = (1 << i); - /* This just so happens to be correct on Cheetah - * at the moment. - */ - buddy <<= 26; + if (!(action_mask & mask)) + continue; - /* Push it to our buddy. */ - upa_writel(buddy | IMAP_VALID, bp->imap); + action_mask &= ~mask; + if (p->handler(__irq(bp), p->dev_id, regs) == IRQ_HANDLED) + random |= p->flags; + + if (!action_mask) + break; + } + if (bp->pil != 0) { + upa_writel(ICLR_IDLE, bp->iclr); + /* Test and add entropy */ + if (random & SA_SAMPLE_RANDOM) + add_interrupt_randomness(irq); + } out: - return; + bp->flags &= ~IBF_INPROGRESS; } -#endif - void handler_irq(int irq, struct pt_regs *regs) { - struct ino_bucket *bp, *nbp; + struct ino_bucket *bp; int cpu = smp_processor_id(); #ifndef CONFIG_SMP @@ -756,8 +620,6 @@ void handler_irq(int irq, struct pt_regs *regs) clear_softint(clr_mask); } #else - int should_forward = 0; - clear_softint(1 << irq); #endif @@ -772,199 +634,76 @@ void handler_irq(int irq, struct pt_regs *regs) #else bp = __bucket(xchg32(irq_work(cpu, irq), 0)); #endif - for ( ; bp != NULL; bp = nbp) { - unsigned char flags = bp->flags; - unsigned char random = 0; + while (bp) { + struct ino_bucket *nbp = __bucket(bp->irq_chain); - nbp = __bucket(bp->irq_chain); bp->irq_chain = 0; - - bp->flags |= IBF_INPROGRESS; - - if ((flags & IBF_ACTIVE) != 0) { -#ifdef CONFIG_PCI - if ((flags & IBF_DMA_SYNC) != 0) { - upa_readl(dma_sync_reg_table[bp->synctab_ent]); - upa_readq(pci_dma_wsync); - } -#endif - if ((flags & IBF_MULTI) == 0) { - struct irqaction *ap = bp->irq_info; - int ret; - - ret = ap->handler(__irq(bp), ap->dev_id, regs); - if (ret == IRQ_HANDLED) - random |= ap->flags; - } else { - void **vector = (void **)bp->irq_info; - int ent; - for (ent = 0; ent < 4; ent++) { - struct irqaction *ap = vector[ent]; - if (ap != NULL) { - int ret; - - ret = ap->handler(__irq(bp), - ap->dev_id, - regs); - if (ret == IRQ_HANDLED) - random |= ap->flags; - } - } - } - /* Only the dummy bucket lacks IMAP/ICLR. */ - if (bp->pil != 0) { -#ifdef CONFIG_SMP - if (should_forward) { - redirect_intr(cpu, bp); - should_forward = 0; - } -#endif - upa_writel(ICLR_IDLE, bp->iclr); - - /* Test and add entropy */ - if (random & SA_SAMPLE_RANDOM) - add_interrupt_randomness(irq); - } - } else - bp->pending = 1; - - bp->flags &= ~IBF_INPROGRESS; + process_bucket(irq, bp, regs); + bp = nbp; } irq_exit(); } #ifdef CONFIG_BLK_DEV_FD -extern void floppy_interrupt(int irq, void *dev_cookie, struct pt_regs *regs); +extern irqreturn_t floppy_interrupt(int, void *, struct pt_regs *);; -void sparc_floppy_irq(int irq, void *dev_cookie, struct pt_regs *regs) -{ - struct irqaction *action = *(irq + irq_action); - struct ino_bucket *bucket; - int cpu = smp_processor_id(); - - irq_enter(); - kstat_this_cpu.irqs[irq]++; - - *(irq_work(cpu, irq)) = 0; - bucket = get_ino_in_irqaction(action) + ivector_table; - - bucket->flags |= IBF_INPROGRESS; - - floppy_interrupt(irq, dev_cookie, regs); - upa_writel(ICLR_IDLE, bucket->iclr); - - bucket->flags &= ~IBF_INPROGRESS; - - irq_exit(); -} -#endif - -/* The following assumes that the branch lies before the place we - * are branching to. This is the case for a trap vector... - * You have been warned. - */ -#define SPARC_BRANCH(dest_addr, inst_addr) \ - (0x10800000 | ((((dest_addr)-(inst_addr))>>2)&0x3fffff)) +/* XXX No easy way to include asm/floppy.h XXX */ +extern unsigned char *pdma_vaddr; +extern unsigned long pdma_size; +extern volatile int doing_pdma; +extern unsigned long fdc_status; -#define SPARC_NOP (0x01000000) - -static void install_fast_irq(unsigned int cpu_irq, - irqreturn_t (*handler)(int, void *, struct pt_regs *)) -{ - extern unsigned long sparc64_ttable_tl0; - unsigned long ttent = (unsigned long) &sparc64_ttable_tl0; - unsigned int *insns; - - ttent += 0x820; - ttent += (cpu_irq - 1) << 5; - insns = (unsigned int *) ttent; - insns[0] = SPARC_BRANCH(((unsigned long) handler), - ((unsigned long)&insns[0])); - insns[1] = SPARC_NOP; - __asm__ __volatile__("membar #StoreStore; flush %0" : : "r" (ttent)); -} - -int request_fast_irq(unsigned int irq, - irqreturn_t (*handler)(int, void *, struct pt_regs *), - unsigned long irqflags, const char *name, void *dev_id) +irqreturn_t sparc_floppy_irq(int irq, void *dev_cookie, struct pt_regs *regs) { - struct irqaction *action; - struct ino_bucket *bucket = __bucket(irq); - unsigned long flags; - - /* No pil0 dummy buckets allowed here. */ - if (bucket < &ivector_table[0] || - bucket >= &ivector_table[NUM_IVECS]) { - unsigned int *caller; - - __asm__ __volatile__("mov %%i7, %0" : "=r" (caller)); - printk(KERN_CRIT "request_fast_irq: Old style IRQ registry attempt " - "from %p, irq %08x.\n", caller, irq); - return -EINVAL; - } - - if (!handler) - return -EINVAL; + if (likely(doing_pdma)) { + void __iomem *stat = (void __iomem *) fdc_status; + unsigned char *vaddr = pdma_vaddr; + unsigned long size = pdma_size; + u8 val; + + while (size) { + val = readb(stat); + if (unlikely(!(val & 0x80))) { + pdma_vaddr = vaddr; + pdma_size = size; + return IRQ_HANDLED; + } + if (unlikely(!(val & 0x20))) { + pdma_vaddr = vaddr; + pdma_size = size; + doing_pdma = 0; + goto main_interrupt; + } + if (val & 0x40) { + /* read */ + *vaddr++ = readb(stat + 1); + } else { + unsigned char data = *vaddr++; - if ((bucket->pil == 0) || (bucket->pil == 14)) { - printk("request_fast_irq: Trying to register shared IRQ 0 or 14.\n"); - return -EBUSY; - } + /* write */ + writeb(data, stat + 1); + } + size--; + } - spin_lock_irqsave(&irq_action_lock, flags); + pdma_vaddr = vaddr; + pdma_size = size; - action = *(bucket->pil + irq_action); - if (action) { - if (action->flags & SA_SHIRQ) - panic("Trying to register fast irq when already shared.\n"); - if (irqflags & SA_SHIRQ) - panic("Trying to register fast irq as shared.\n"); - printk("request_fast_irq: Trying to register yet already owned.\n"); - spin_unlock_irqrestore(&irq_action_lock, flags); - return -EBUSY; - } + /* Send Terminal Count pulse to floppy controller. */ + val = readb(auxio_register); + val |= AUXIO_AUX1_FTCNT; + writeb(val, auxio_register); + val &= AUXIO_AUX1_FTCNT; + writeb(val, auxio_register); - /* - * We do not check for SA_SAMPLE_RANDOM in this path. Neither do we - * support smp intr affinity in this path. - */ - if (irqflags & SA_STATIC_ALLOC) { - if (static_irq_count < MAX_STATIC_ALLOC) - action = &static_irqaction[static_irq_count++]; - else - printk("Request for IRQ%d (%s) SA_STATIC_ALLOC failed " - "using kmalloc\n", bucket->pil, name); - } - if (action == NULL) - action = (struct irqaction *)kmalloc(sizeof(struct irqaction), - GFP_ATOMIC); - if (!action) { - spin_unlock_irqrestore(&irq_action_lock, flags); - return -ENOMEM; + doing_pdma = 0; } - install_fast_irq(bucket->pil, handler); - bucket->irq_info = action; - bucket->flags |= IBF_ACTIVE; - - action->handler = handler; - action->flags = irqflags; - action->dev_id = NULL; - action->name = name; - action->next = NULL; - put_ino_in_irqaction(action, irq); - put_smpaff_in_irqaction(action, CPU_MASK_NONE); - - *(bucket->pil + irq_action) = action; - enable_irq(irq); - - spin_unlock_irqrestore(&irq_action_lock, flags); - -#ifdef CONFIG_SMP - distribute_irqs(); -#endif - return 0; +main_interrupt: + return floppy_interrupt(irq, dev_cookie, regs); } +EXPORT_SYMBOL(sparc_floppy_irq); +#endif /* We really don't need these at all on the Sparc. We only have * stubs here because they are exported to modules. @@ -1030,7 +769,10 @@ static void distribute_irqs(void) */ for (level = 1; level < NR_IRQS; level++) { struct irqaction *p = irq_action[level]; - if (level == 12) continue; + + if (level == 12) + continue; + while(p) { cpu = retarget_one_irq(p, cpu); p = p->next; @@ -1040,8 +782,14 @@ static void distribute_irqs(void) } #endif +struct sun5_timer { + u64 count0; + u64 limit0; + u64 count1; + u64 limit1; +}; -struct sun5_timer *prom_timers; +static struct sun5_timer *prom_timers; static u64 prom_limit0, prom_limit1; static void map_prom_timers(void) @@ -1097,18 +845,6 @@ static void kill_prom_timer(void) : "g1", "g2"); } -void enable_prom_timer(void) -{ - if (!prom_timers) - return; - - /* Set it to whatever was there before. */ - prom_timers->limit1 = prom_limit1; - prom_timers->count1 = 0; - prom_timers->limit0 = prom_limit0; - prom_timers->count0 = 0; -} - void init_irqwork_curcpu(void) { register struct irq_work_struct *workp asm("o2"); @@ -1175,7 +911,8 @@ static int irq_affinity_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data) { struct ino_bucket *bp = ivector_table + (long)data; - struct irqaction *ap = bp->irq_info; + struct irq_desc *desc = bp->irq_info; + struct irqaction *ap = desc->action; cpumask_t mask; int len; @@ -1193,11 +930,13 @@ static int irq_affinity_read_proc (char *page, char **start, off_t off, static inline void set_intr_affinity(int irq, cpumask_t hw_aff) { struct ino_bucket *bp = ivector_table + irq; + struct irq_desc *desc = bp->irq_info; + struct irqaction *ap = desc->action; /* Users specify affinity in terms of hw cpu ids. * As soon as we do this, handler_irq() might see and take action. */ - put_smpaff_in_irqaction((struct irqaction *)bp->irq_info, hw_aff); + put_smpaff_in_irqaction(ap, hw_aff); /* Migration is simply done by the next cpu to service this * interrupt. diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index 7066d7ba667a..bbf11f85dab1 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -6,7 +6,6 @@ #include <linux/config.h> #include <linux/kernel.h> #include <linux/kprobes.h> - #include <asm/kdebug.h> #include <asm/signal.h> @@ -47,25 +46,59 @@ void arch_copy_kprobe(struct kprobe *p) { p->ainsn.insn[0] = *p->addr; p->ainsn.insn[1] = BREAKPOINT_INSTRUCTION_2; + p->opcode = *p->addr; } -void arch_remove_kprobe(struct kprobe *p) +void arch_arm_kprobe(struct kprobe *p) +{ + *p->addr = BREAKPOINT_INSTRUCTION; + flushi(p->addr); +} + +void arch_disarm_kprobe(struct kprobe *p) { + *p->addr = p->opcode; + flushi(p->addr); } -/* kprobe_status settings */ -#define KPROBE_HIT_ACTIVE 0x00000001 -#define KPROBE_HIT_SS 0x00000002 +void arch_remove_kprobe(struct kprobe *p) +{ +} static struct kprobe *current_kprobe; static unsigned long current_kprobe_orig_tnpc; static unsigned long current_kprobe_orig_tstate_pil; static unsigned int kprobe_status; +static struct kprobe *kprobe_prev; +static unsigned long kprobe_orig_tnpc_prev; +static unsigned long kprobe_orig_tstate_pil_prev; +static unsigned int kprobe_status_prev; -static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +static inline void save_previous_kprobe(void) +{ + kprobe_status_prev = kprobe_status; + kprobe_orig_tnpc_prev = current_kprobe_orig_tnpc; + kprobe_orig_tstate_pil_prev = current_kprobe_orig_tstate_pil; + kprobe_prev = current_kprobe; +} + +static inline void restore_previous_kprobe(void) +{ + kprobe_status = kprobe_status_prev; + current_kprobe_orig_tnpc = kprobe_orig_tnpc_prev; + current_kprobe_orig_tstate_pil = kprobe_orig_tstate_pil_prev; + current_kprobe = kprobe_prev; +} + +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) { current_kprobe_orig_tnpc = regs->tnpc; current_kprobe_orig_tstate_pil = (regs->tstate & TSTATE_PIL); + current_kprobe = p; +} + +static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +{ regs->tstate |= TSTATE_PIL; /*single step inline, if it a breakpoint instruction*/ @@ -78,17 +111,6 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) } } -static inline void disarm_kprobe(struct kprobe *p, struct pt_regs *regs) -{ - *p->addr = p->opcode; - flushi(p->addr); - - regs->tpc = (unsigned long) p->addr; - regs->tnpc = current_kprobe_orig_tnpc; - regs->tstate = ((regs->tstate & ~TSTATE_PIL) | - current_kprobe_orig_tstate_pil); -} - static int kprobe_handler(struct pt_regs *regs) { struct kprobe *p; @@ -109,8 +131,18 @@ static int kprobe_handler(struct pt_regs *regs) unlock_kprobes(); goto no_kprobe; } - disarm_kprobe(p, regs); - ret = 1; + /* We have reentered the kprobe_handler(), since + * another probe was hit while within the handler. + * We here save the original kprobes variables and + * just single step on the instruction of the new probe + * without calling any user handlers. + */ + save_previous_kprobe(); + set_current_kprobe(p, regs); + p->nmissed++; + kprobe_status = KPROBE_REENTER; + prepare_singlestep(p, regs); + return 1; } else { p = current_kprobe; if (p->break_handler && p->break_handler(p, regs)) @@ -138,8 +170,8 @@ static int kprobe_handler(struct pt_regs *regs) goto no_kprobe; } + set_current_kprobe(p, regs); kprobe_status = KPROBE_HIT_ACTIVE; - current_kprobe = p; if (p->pre_handler && p->pre_handler(p, regs)) return 1; @@ -245,12 +277,20 @@ static inline int post_kprobe_handler(struct pt_regs *regs) if (!kprobe_running()) return 0; - if (current_kprobe->post_handler) + if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { + kprobe_status = KPROBE_HIT_SSDONE; current_kprobe->post_handler(current_kprobe, regs, 0); + } resume_execution(current_kprobe, regs); + /*Restore back the original saved kprobes variables and continue. */ + if (kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(); + goto out; + } unlock_kprobes(); +out: preempt_enable_no_resched(); return 1; @@ -392,3 +432,9 @@ int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) } return 0; } + +/* architecture specific initialization */ +int arch_init_kprobes(void) +{ + return 0; +} diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index 534320ef0db2..91ab466d6c66 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -1303,8 +1303,7 @@ static void psycho_controller_hwinit(struct pci_controller_info *p) { u64 tmp; - /* PROM sets the IRQ retry value too low, increase it. */ - psycho_write(p->pbm_A.controller_regs + PSYCHO_IRQ_RETRY, 0xff); + psycho_write(p->pbm_A.controller_regs + PSYCHO_IRQ_RETRY, 5); /* Enable arbiter for all PCI slots. */ tmp = psycho_read(p->pbm_A.controller_regs + PSYCHO_PCIA_CTRL); diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c index 53d333b4a4e8..52bf3431a422 100644 --- a/arch/sparc64/kernel/pci_sabre.c +++ b/arch/sparc64/kernel/pci_sabre.c @@ -595,6 +595,23 @@ static int __init sabre_ino_to_pil(struct pci_dev *pdev, unsigned int ino) return ret; } +/* When a device lives behind a bridge deeper in the PCI bus topology + * than APB, a special sequence must run to make sure all pending DMA + * transfers at the time of IRQ delivery are visible in the coherency + * domain by the cpu. This sequence is to perform a read on the far + * side of the non-APB bridge, then perform a read of Sabre's DMA + * write-sync register. + */ +static void sabre_wsync_handler(struct ino_bucket *bucket, void *_arg1, void *_arg2) +{ + struct pci_dev *pdev = _arg1; + unsigned long sync_reg = (unsigned long) _arg2; + u16 _unused; + + pci_read_config_word(pdev, PCI_VENDOR_ID, &_unused); + sabre_read(sync_reg); +} + static unsigned int __init sabre_irq_build(struct pci_pbm_info *pbm, struct pci_dev *pdev, unsigned int ino) @@ -639,24 +656,14 @@ static unsigned int __init sabre_irq_build(struct pci_pbm_info *pbm, if (pdev) { struct pcidev_cookie *pcp = pdev->sysdata; - /* When a device lives behind a bridge deeper in the - * PCI bus topology than APB, a special sequence must - * run to make sure all pending DMA transfers at the - * time of IRQ delivery are visible in the coherency - * domain by the cpu. This sequence is to perform - * a read on the far side of the non-APB bridge, then - * perform a read of Sabre's DMA write-sync register. - * - * Currently, the PCI_CONFIG register for the device - * is used for this read from the far side of the bridge. - */ if (pdev->bus->number != pcp->pbm->pci_first_busno) { - bucket->flags |= IBF_DMA_SYNC; - bucket->synctab_ent = dma_sync_reg_table_entry++; - dma_sync_reg_table[bucket->synctab_ent] = - (unsigned long) sabre_pci_config_mkaddr( - pcp->pbm, - pdev->bus->number, pdev->devfn, PCI_COMMAND); + struct pci_controller_info *p = pcp->pbm->parent; + struct irq_desc *d = bucket->irq_info; + + d->pre_handler = sabre_wsync_handler; + d->pre_handler_arg1 = pdev; + d->pre_handler_arg2 = (void *) + p->pbm_A.controller_regs + SABRE_WRSYNC; } } return __irq(bucket); @@ -1626,10 +1633,9 @@ void __init sabre_init(int pnode, char *model_name) */ p->pbm_A.controller_regs = pr_regs[0].phys_addr; p->pbm_B.controller_regs = pr_regs[0].phys_addr; - pci_dma_wsync = p->pbm_A.controller_regs + SABRE_WRSYNC; - printk("PCI: Found SABRE, main regs at %016lx, wsync at %016lx\n", - p->pbm_A.controller_regs, pci_dma_wsync); + printk("PCI: Found SABRE, main regs at %016lx\n", + p->pbm_A.controller_regs); /* Clear interrupts */ diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c index 5753175b94e6..6a182bb66281 100644 --- a/arch/sparc64/kernel/pci_schizo.c +++ b/arch/sparc64/kernel/pci_schizo.c @@ -15,6 +15,7 @@ #include <asm/iommu.h> #include <asm/irq.h> #include <asm/upa.h> +#include <asm/pstate.h> #include "pci_impl.h" #include "iommu_common.h" @@ -326,6 +327,44 @@ static int __init schizo_ino_to_pil(struct pci_dev *pdev, unsigned int ino) return ret; } +static void tomatillo_wsync_handler(struct ino_bucket *bucket, void *_arg1, void *_arg2) +{ + unsigned long sync_reg = (unsigned long) _arg2; + u64 mask = 1 << (__irq_ino(__irq(bucket)) & IMAP_INO); + u64 val; + int limit; + + schizo_write(sync_reg, mask); + + limit = 100000; + val = 0; + while (--limit) { + val = schizo_read(sync_reg); + if (!(val & mask)) + break; + } + if (limit <= 0) { + printk("tomatillo_wsync_handler: DMA won't sync [%lx:%lx]\n", + val, mask); + } + + if (_arg1) { + static unsigned char cacheline[64] + __attribute__ ((aligned (64))); + + __asm__ __volatile__("rd %%fprs, %0\n\t" + "or %0, %4, %1\n\t" + "wr %1, 0x0, %%fprs\n\t" + "stda %%f0, [%5] %6\n\t" + "wr %0, 0x0, %%fprs\n\t" + "membar #Sync" + : "=&r" (mask), "=&r" (val) + : "0" (mask), "1" (val), + "i" (FPRS_FEF), "r" (&cacheline[0]), + "i" (ASI_BLK_COMMIT_P)); + } +} + static unsigned int schizo_irq_build(struct pci_pbm_info *pbm, struct pci_dev *pdev, unsigned int ino) @@ -369,6 +408,15 @@ static unsigned int schizo_irq_build(struct pci_pbm_info *pbm, bucket = __bucket(build_irq(pil, ign_fixup, iclr, imap)); bucket->flags |= IBF_PCI; + if (pdev && pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO) { + struct irq_desc *p = bucket->irq_info; + + p->pre_handler = tomatillo_wsync_handler; + p->pre_handler_arg1 = ((pbm->chip_version <= 4) ? + (void *) 1 : (void *) 0); + p->pre_handler_arg2 = (void *) pbm->sync_reg; + } + return __irq(bucket); } @@ -885,6 +933,7 @@ static irqreturn_t schizo_ce_intr(int irq, void *dev_id, struct pt_regs *regs) #define SCHIZO_PCI_CTRL (0x2000UL) #define SCHIZO_PCICTRL_BUS_UNUS (1UL << 63UL) /* Safari */ +#define SCHIZO_PCICTRL_DTO_INT (1UL << 61UL) /* Tomatillo */ #define SCHIZO_PCICTRL_ARB_PRIO (0x1ff << 52UL) /* Tomatillo */ #define SCHIZO_PCICTRL_ESLCK (1UL << 51UL) /* Safari */ #define SCHIZO_PCICTRL_ERRSLOT (7UL << 48UL) /* Safari */ @@ -1887,37 +1936,27 @@ static void __init schizo_pbm_hw_init(struct pci_pbm_info *pbm) { u64 tmp; - /* Set IRQ retry to infinity. */ - schizo_write(pbm->pbm_regs + SCHIZO_PCI_IRQ_RETRY, - SCHIZO_IRQ_RETRY_INF); + schizo_write(pbm->pbm_regs + SCHIZO_PCI_IRQ_RETRY, 5); - /* Enable arbiter for all PCI slots. Also, disable PCI interval - * timer so that DTO (Discard TimeOuts) are not reported because - * some Schizo revisions report them erroneously. - */ tmp = schizo_read(pbm->pbm_regs + SCHIZO_PCI_CTRL); - if (pbm->chip_type == PBM_CHIP_TYPE_SCHIZO_PLUS && - pbm->chip_version == 0x5 && - pbm->chip_revision == 0x1) - tmp |= 0x0f; - else - tmp |= 0xff; - tmp &= ~SCHIZO_PCICTRL_PTO; + /* Enable arbiter for all PCI slots. */ + tmp |= 0xff; + if (pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO && pbm->chip_version >= 0x2) tmp |= 0x3UL << SCHIZO_PCICTRL_PTO_SHIFT; - else - tmp |= 0x1UL << SCHIZO_PCICTRL_PTO_SHIFT; if (!prom_getbool(pbm->prom_node, "no-bus-parking")) tmp |= SCHIZO_PCICTRL_PARK; + else + tmp &= ~SCHIZO_PCICTRL_PARK; if (pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO && pbm->chip_version <= 0x1) - tmp |= (1UL << 61); + tmp |= SCHIZO_PCICTRL_DTO_INT; else - tmp &= ~(1UL << 61); + tmp &= ~SCHIZO_PCICTRL_DTO_INT; if (pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO) tmp |= (SCHIZO_PCICTRL_MRM_PREF | @@ -2015,6 +2054,9 @@ static void __init schizo_pbm_init(struct pci_controller_info *p, pbm->pbm_regs = pr_regs[0].phys_addr; pbm->controller_regs = pr_regs[1].phys_addr - 0x10000UL; + if (chip_type == PBM_CHIP_TYPE_TOMATILLO) + pbm->sync_reg = pr_regs[3].phys_addr + 0x1a18UL; + sprintf(pbm->name, (chip_type == PBM_CHIP_TYPE_TOMATILLO ? "TOMATILLO%d PBM%c" : diff --git a/arch/sparc64/kernel/power.c b/arch/sparc64/kernel/power.c index 52f14e399b1c..946cee0257ea 100644 --- a/arch/sparc64/kernel/power.c +++ b/arch/sparc64/kernel/power.c @@ -4,6 +4,8 @@ * Copyright (C) 1999 David S. Miller (davem@redhat.com) */ +#define __KERNEL_SYSCALLS__ + #include <linux/config.h> #include <linux/kernel.h> #include <linux/module.h> @@ -17,7 +19,6 @@ #include <asm/ebus.h> #include <asm/auxio.h> -#define __KERNEL_SYSCALLS__ #include <linux/unistd.h> /* @@ -68,8 +69,6 @@ void machine_power_off(void) machine_halt(); } -EXPORT_SYMBOL(machine_power_off); - #ifdef CONFIG_PCI static int powerd(void *__unused) { diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index a0cd2b2494d6..07424b075938 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -124,8 +124,6 @@ void machine_halt(void) panic("Halt failed!"); } -EXPORT_SYMBOL(machine_halt); - void machine_alt_power_off(void) { if (!serial_console && prom_palette) @@ -154,8 +152,6 @@ void machine_restart(char * cmd) panic("Reboot failed!"); } -EXPORT_SYMBOL(machine_restart); - static void show_regwindow32(struct pt_regs *regs) { struct reg_window32 __user *rw; @@ -621,8 +617,8 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp, memcpy(child_trap_frame, (((struct sparc_stackf *)regs)-1), (TRACEREG_SZ+STACKFRAME_SZ)); t->flags = (t->flags & ~((0xffUL << TI_FLAG_CWP_SHIFT) | (0xffUL << TI_FLAG_CURRENT_DS_SHIFT))) | - _TIF_NEWCHILD | (((regs->tstate + 1) & TSTATE_CWP) << TI_FLAG_CWP_SHIFT); + t->new_child = 1; t->ksp = ((unsigned long) child_trap_frame) - STACK_BIAS; t->kregs = (struct pt_regs *)(child_trap_frame+sizeof(struct sparc_stackf)); t->fpsaved[0] = 0; diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c index 80a76e2ad732..23ad839d113f 100644 --- a/arch/sparc64/kernel/ptrace.c +++ b/arch/sparc64/kernel/ptrace.c @@ -19,6 +19,8 @@ #include <linux/smp.h> #include <linux/smp_lock.h> #include <linux/security.h> +#include <linux/seccomp.h> +#include <linux/audit.h> #include <linux/signal.h> #include <asm/asi.h> @@ -628,15 +630,27 @@ out: unlock_kernel(); } -asmlinkage void syscall_trace(void) +asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p) { -#ifdef DEBUG_PTRACE - printk("%s [%d]: syscall_trace\n", current->comm, current->pid); -#endif - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return; + /* do the secure computing check first */ + secure_computing(regs->u_regs[UREG_G1]); + + if (unlikely(current->audit_context) && syscall_exit_p) { + unsigned long tstate = regs->tstate; + int result = AUDITSC_SUCCESS; + + if (unlikely(tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) + result = AUDITSC_FAILURE; + + audit_syscall_exit(current, result, regs->u_regs[UREG_I0]); + } + if (!(current->ptrace & PT_PTRACED)) - return; + goto out; + + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + goto out; + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); @@ -645,12 +659,20 @@ asmlinkage void syscall_trace(void) * for normal use. strace only continues with a signal if the * stopping signal is not SIGTRAP. -brl */ -#ifdef DEBUG_PTRACE - printk("%s [%d]: syscall_trace exit= %x\n", current->comm, - current->pid, current->exit_code); -#endif if (current->exit_code) { - send_sig (current->exit_code, current, 1); + send_sig(current->exit_code, current, 1); current->exit_code = 0; } + +out: + if (unlikely(current->audit_context) && !syscall_exit_p) + audit_syscall_entry(current, + (test_thread_flag(TIF_32BIT) ? + AUDIT_ARCH_SPARC : + AUDIT_ARCH_SPARC64), + regs->u_regs[UREG_G1], + regs->u_regs[UREG_I0], + regs->u_regs[UREG_I1], + regs->u_regs[UREG_I2], + regs->u_regs[UREG_I3]); } diff --git a/arch/sparc64/kernel/semaphore.c b/arch/sparc64/kernel/semaphore.c index 63496c43fe17..a809e63f03ef 100644 --- a/arch/sparc64/kernel/semaphore.c +++ b/arch/sparc64/kernel/semaphore.c @@ -32,8 +32,9 @@ static __inline__ int __sem_update_count(struct semaphore *sem, int incr) " add %1, %4, %1\n" " cas [%3], %0, %1\n" " cmp %0, %1\n" +" membar #StoreLoad | #StoreStore\n" " bne,pn %%icc, 1b\n" -" membar #StoreLoad | #StoreStore\n" +" nop\n" : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count) : "r" (&sem->count), "r" (incr), "m" (sem->count) : "cc"); @@ -71,8 +72,9 @@ void up(struct semaphore *sem) " cmp %%g1, %%g7\n" " bne,pn %%icc, 1b\n" " addcc %%g7, 1, %%g0\n" +" membar #StoreLoad | #StoreStore\n" " ble,pn %%icc, 3f\n" -" membar #StoreLoad | #StoreStore\n" +" nop\n" "2:\n" " .subsection 2\n" "3: mov %0, %%g1\n" @@ -128,8 +130,9 @@ void __sched down(struct semaphore *sem) " cmp %%g1, %%g7\n" " bne,pn %%icc, 1b\n" " cmp %%g7, 1\n" +" membar #StoreLoad | #StoreStore\n" " bl,pn %%icc, 3f\n" -" membar #StoreLoad | #StoreStore\n" +" nop\n" "2:\n" " .subsection 2\n" "3: mov %0, %%g1\n" @@ -233,8 +236,9 @@ int __sched down_interruptible(struct semaphore *sem) " cmp %%g1, %%g7\n" " bne,pn %%icc, 1b\n" " cmp %%g7, 1\n" +" membar #StoreLoad | #StoreStore\n" " bl,pn %%icc, 3f\n" -" membar #StoreLoad | #StoreStore\n" +" nop\n" "2:\n" " .subsection 2\n" "3: mov %2, %%g1\n" diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c index 9a375e975cff..f28428f4170e 100644 --- a/arch/sparc64/kernel/signal32.c +++ b/arch/sparc64/kernel/signal32.c @@ -102,7 +102,7 @@ typedef struct compat_siginfo{ /* POSIX.1b timers */ struct { - timer_t _tid; /* timer id */ + compat_timer_t _tid; /* timer id */ int _overrun; /* overrun count */ compat_sigval_t _sigval; /* same as below */ int _sys_private; /* not to be passed to user */ diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index e5b9c7a27789..b9b42491e118 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -45,8 +45,8 @@ extern void calibrate_delay(void); /* Please don't make this stuff initdata!!! --DaveM */ static unsigned char boot_cpu_id; -cpumask_t cpu_online_map = CPU_MASK_NONE; -cpumask_t phys_cpu_present_map = CPU_MASK_NONE; +cpumask_t cpu_online_map __read_mostly = CPU_MASK_NONE; +cpumask_t phys_cpu_present_map __read_mostly = CPU_MASK_NONE; static cpumask_t smp_commenced_mask; static cpumask_t cpu_callout_map; @@ -137,7 +137,7 @@ void __init smp_callin(void) /* Clear this or we will die instantly when we * schedule back to this idler... */ - clear_thread_flag(TIF_NEWCHILD); + current_thread_info()->new_child = 0; /* Attach to the address space of init_task. */ atomic_inc(&init_mm.mm_count); @@ -155,7 +155,7 @@ void cpu_panic(void) panic("SMP bolixed\n"); } -static unsigned long current_tick_offset; +static unsigned long current_tick_offset __read_mostly; /* This tick register synchronization scheme is taken entirely from * the ia64 port, see arch/ia64/kernel/smpboot.c for details and credit. @@ -1193,8 +1193,8 @@ void smp_send_stop(void) { } -unsigned long __per_cpu_base; -unsigned long __per_cpu_shift; +unsigned long __per_cpu_base __read_mostly; +unsigned long __per_cpu_shift __read_mostly; EXPORT_SYMBOL(__per_cpu_base); EXPORT_SYMBOL(__per_cpu_shift); diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index e78cc53594fa..9202d925a9ce 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -79,7 +79,7 @@ extern void linux_sparc_syscall(void); extern void rtrap(void); extern void show_regs(struct pt_regs *); extern void solaris_syscall(void); -extern void syscall_trace(void); +extern void syscall_trace(struct pt_regs *, int); extern u32 sunos_sys_table[], sys_call_table32[]; extern void tl0_solaris(void); extern void sys_sigsuspend(void); @@ -227,7 +227,6 @@ EXPORT_SYMBOL(__flush_dcache_range); EXPORT_SYMBOL(mostek_lock); EXPORT_SYMBOL(mstk48t02_regs); -EXPORT_SYMBOL(request_fast_irq); #ifdef CONFIG_SUN_AUXIO EXPORT_SYMBOL(auxio_set_led); EXPORT_SYMBOL(auxio_set_lte); diff --git a/arch/sparc64/kernel/sys32.S b/arch/sparc64/kernel/sys32.S index 5a95e98c5317..5f9e4fae612e 100644 --- a/arch/sparc64/kernel/sys32.S +++ b/arch/sparc64/kernel/sys32.S @@ -135,6 +135,8 @@ SIGN2(sys32_shutdown, sys_shutdown, %o0, %o1) SIGN3(sys32_socketpair, sys_socketpair, %o0, %o1, %o2) SIGN1(sys32_getpeername, sys_getpeername, %o0) SIGN1(sys32_getsockname, sys_getsockname, %o0) +SIGN2(sys32_ioprio_get, sys_ioprio_get, %o0, %o1) +SIGN3(sys32_ioprio_set, sys_ioprio_set, %o0, %o1, %o2) .globl sys32_mmap2 sys32_mmap2: diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S index a5e36a4c8924..53eaf2345fe9 100644 --- a/arch/sparc64/kernel/systbls.S +++ b/arch/sparc64/kernel/systbls.S @@ -50,8 +50,8 @@ sys_call_table32: .word sys_nis_syscall, sys32_mkdir, sys_rmdir, sys32_utimes, compat_sys_stat64 /*140*/ .word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit .word compat_sys_setrlimit, sys_pivot_root, sys32_prctl, sys_pciconfig_read, sys_pciconfig_write -/*150*/ .word sys_nis_syscall, sys_nis_syscall, sys_nis_syscall, sys_poll, sys_getdents64 - .word compat_sys_fcntl64, sys_ni_syscall, compat_sys_statfs, compat_sys_fstatfs, sys_oldumount +/*150*/ .word sys_nis_syscall, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64 + .word compat_sys_fcntl64, sys_inotify_rm_watch, compat_sys_statfs, compat_sys_fstatfs, sys_oldumount /*160*/ .word compat_sys_sched_setaffinity, compat_sys_sched_getaffinity, sys32_getdomainname, sys32_setdomainname, sys_nis_syscall .word sys_quotactl, sys_set_tid_address, compat_sys_mount, sys_ustat, sys32_setxattr /*170*/ .word sys32_lsetxattr, sys32_fsetxattr, sys_getxattr, sys_lgetxattr, compat_sys_getdents @@ -59,11 +59,11 @@ sys_call_table32: /*180*/ .word sys32_flistxattr, sys_removexattr, sys_lremovexattr, compat_sys_sigpending, sys_ni_syscall .word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sparc64_newuname /*190*/ .word sys32_init_module, sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl - .word sys32_epoll_wait, sys_nis_syscall, sys_getppid, sys32_sigaction, sys_sgetmask + .word sys32_epoll_wait, sys32_ioprio_set, sys_getppid, sys32_sigaction, sys_sgetmask /*200*/ .word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir .word sys32_readahead, sys32_socketcall, sys32_syslog, sys32_lookup_dcookie, sys32_fadvise64 /*210*/ .word sys32_fadvise64_64, sys32_tgkill, sys32_waitpid, sys_swapoff, sys32_sysinfo - .word sys32_ipc, sys32_sigreturn, sys_clone, sys_nis_syscall, sys32_adjtimex + .word sys32_ipc, sys32_sigreturn, sys_clone, sys32_ioprio_get, sys32_adjtimex /*220*/ .word sys32_sigprocmask, sys_ni_syscall, sys32_delete_module, sys_ni_syscall, sys32_getpgid .word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys32_setfsuid16, sys32_setfsgid16 /*230*/ .word sys32_select, compat_sys_time, sys_nis_syscall, compat_sys_stime, compat_sys_statfs64 @@ -116,8 +116,8 @@ sys_call_table: .word sys_socketpair, sys_mkdir, sys_rmdir, sys_utimes, sys_stat64 /*140*/ .word sys_sendfile64, sys_getpeername, sys_futex, sys_gettid, sys_getrlimit .word sys_setrlimit, sys_pivot_root, sys_prctl, sys_pciconfig_read, sys_pciconfig_write -/*150*/ .word sys_getsockname, sys_nis_syscall, sys_nis_syscall, sys_poll, sys_getdents64 - .word sys_nis_syscall, sys_ni_syscall, sys_statfs, sys_fstatfs, sys_oldumount +/*150*/ .word sys_getsockname, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64 + .word sys_nis_syscall, sys_inotify_rm_watch, sys_statfs, sys_fstatfs, sys_oldumount /*160*/ .word sys_sched_setaffinity, sys_sched_getaffinity, sys_getdomainname, sys_setdomainname, sys_utrap_install .word sys_quotactl, sys_set_tid_address, sys_mount, sys_ustat, sys_setxattr /*170*/ .word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents @@ -125,11 +125,11 @@ sys_call_table: /*180*/ .word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall .word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sparc64_newuname /*190*/ .word sys_init_module, sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl - .word sys_epoll_wait, sys_nis_syscall, sys_getppid, sys_nis_syscall, sys_sgetmask + .word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask /*200*/ .word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall .word sys_readahead, sys_socketcall, sys_syslog, sys_lookup_dcookie, sys_fadvise64 /*210*/ .word sys_fadvise64_64, sys_tgkill, sys_waitpid, sys_swapoff, sys_sysinfo - .word sys_ipc, sys_nis_syscall, sys_clone, sys_nis_syscall, sys_adjtimex + .word sys_ipc, sys_nis_syscall, sys_clone, sys_ioprio_get, sys_adjtimex /*220*/ .word sys_nis_syscall, sys_ni_syscall, sys_delete_module, sys_ni_syscall, sys_getpgid .word sys_bdflush, sys_sysfs, sys_nis_syscall, sys_setfsuid, sys_setfsgid /*230*/ .word sys_select, sys_nis_syscall, sys_nis_syscall, sys_stime, sys_statfs64 diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 71b4e3807694..362b9c26871b 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -73,7 +73,7 @@ static __initdata struct sparc64_tick_ops dummy_tick_ops = { .get_tick = dummy_get_tick, }; -struct sparc64_tick_ops *tick_ops = &dummy_tick_ops; +struct sparc64_tick_ops *tick_ops __read_mostly = &dummy_tick_ops; #define TICK_PRIV_BIT (1UL << 63) @@ -195,7 +195,7 @@ static unsigned long tick_add_tick(unsigned long adj, unsigned long offset) return new_tick; } -static struct sparc64_tick_ops tick_operations = { +static struct sparc64_tick_ops tick_operations __read_mostly = { .init_tick = tick_init_tick, .get_tick = tick_get_tick, .get_compare = tick_get_compare, @@ -276,7 +276,7 @@ static unsigned long stick_add_compare(unsigned long adj) return new_compare; } -static struct sparc64_tick_ops stick_operations = { +static struct sparc64_tick_ops stick_operations __read_mostly = { .init_tick = stick_init_tick, .get_tick = stick_get_tick, .get_compare = stick_get_compare, @@ -422,7 +422,7 @@ static unsigned long hbtick_add_compare(unsigned long adj) return val; } -static struct sparc64_tick_ops hbtick_operations = { +static struct sparc64_tick_ops hbtick_operations __read_mostly = { .init_tick = hbtick_init_tick, .get_tick = hbtick_get_tick, .get_compare = hbtick_get_compare, @@ -437,10 +437,9 @@ static struct sparc64_tick_ops hbtick_operations = { * NOTE: On SUN5 systems the ticker interrupt comes in using 2 * interrupts, one at level14 and one with softint bit 0. */ -unsigned long timer_tick_offset; -unsigned long timer_tick_compare; +unsigned long timer_tick_offset __read_mostly; -static unsigned long timer_ticks_per_nsec_quotient; +static unsigned long timer_ticks_per_nsec_quotient __read_mostly; #define TICK_SIZE (tick_nsec / 1000) @@ -464,7 +463,7 @@ static inline void timer_check_rtc(void) static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs * regs) { - unsigned long ticks, pstate; + unsigned long ticks, compare, pstate; write_seqlock(&xtime_lock); @@ -483,14 +482,14 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs * regs) : "=r" (pstate) : "i" (PSTATE_IE)); - timer_tick_compare = tick_ops->add_compare(timer_tick_offset); + compare = tick_ops->add_compare(timer_tick_offset); ticks = tick_ops->get_tick(); /* Restore PSTATE_IE. */ __asm__ __volatile__("wrpr %0, 0x0, %%pstate" : /* no outputs */ : "r" (pstate)); - } while (time_after_eq(ticks, timer_tick_compare)); + } while (time_after_eq(ticks, compare)); timer_check_rtc(); @@ -506,11 +505,6 @@ void timer_tick_interrupt(struct pt_regs *regs) do_timer(regs); - /* - * Only keep timer_tick_offset uptodate, but don't set TICK_CMPR. - */ - timer_tick_compare = tick_ops->get_compare() + timer_tick_offset; - timer_check_rtc(); write_sequnlock(&xtime_lock); @@ -973,7 +967,7 @@ static void sparc64_start_timers(irqreturn_t (*cfunc)(int, void *, struct pt_reg int err; /* Register IRQ handler. */ - err = request_irq(build_irq(0, 0, 0UL, 0UL), cfunc, SA_STATIC_ALLOC, + err = request_irq(build_irq(0, 0, 0UL, 0UL), cfunc, 0, "timer", NULL); if (err) { diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index 2c8f9344b4ee..3a145fc39cf2 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -98,8 +98,9 @@ startup_continue: sethi %hi(prom_entry_lock), %g2 1: ldstub [%g2 + %lo(prom_entry_lock)], %g1 + membar #StoreLoad | #StoreStore brnz,pn %g1, 1b - membar #StoreLoad | #StoreStore + nop sethi %hi(p1275buf), %g2 or %g2, %lo(p1275buf), %g2 diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index a9f4596d7c2b..100b0107c4be 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -2125,6 +2125,8 @@ void __init trap_init(void) TI_PCR != offsetof(struct thread_info, pcr_reg) || TI_CEE_STUFF != offsetof(struct thread_info, cee_stuff) || TI_PRE_COUNT != offsetof(struct thread_info, preempt_count) || + TI_NEW_CHILD != offsetof(struct thread_info, new_child) || + TI_SYS_NOERROR != offsetof(struct thread_info, syscall_noerror) || TI_FPREGS != offsetof(struct thread_info, fpregs) || (TI_FPREGS & (64 - 1))) thread_info_offsets_are_bolixed_dave(); diff --git a/arch/sparc64/kernel/vmlinux.lds.S b/arch/sparc64/kernel/vmlinux.lds.S index 382fd6798bb9..950423da8a6a 100644 --- a/arch/sparc64/kernel/vmlinux.lds.S +++ b/arch/sparc64/kernel/vmlinux.lds.S @@ -32,6 +32,8 @@ SECTIONS .data1 : { *(.data1) } . = ALIGN(64); .data.cacheline_aligned : { *(.data.cacheline_aligned) } + . = ALIGN(64); + .data.read_mostly : { *(.data.read_mostly) } _edata = .; PROVIDE (edata = .); .fixup : { *(.fixup) } diff --git a/arch/sparc64/lib/U1memcpy.S b/arch/sparc64/lib/U1memcpy.S index da9b520c7189..bafd2fc07acb 100644 --- a/arch/sparc64/lib/U1memcpy.S +++ b/arch/sparc64/lib/U1memcpy.S @@ -87,14 +87,17 @@ #define LOOP_CHUNK3(src, dest, len, branch_dest) \ MAIN_LOOP_CHUNK(src, dest, f32, f48, len, branch_dest) +#define DO_SYNC membar #Sync; #define STORE_SYNC(dest, fsrc) \ EX_ST(STORE_BLK(%fsrc, %dest)); \ - add %dest, 0x40, %dest; + add %dest, 0x40, %dest; \ + DO_SYNC #define STORE_JUMP(dest, fsrc, target) \ EX_ST(STORE_BLK(%fsrc, %dest)); \ add %dest, 0x40, %dest; \ - ba,pt %xcc, target; + ba,pt %xcc, target; \ + nop; #define FINISH_VISCHUNK(dest, f0, f1, left) \ subcc %left, 8, %left;\ @@ -239,17 +242,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ ba,pt %xcc, 1b+4 faligndata %f0, %f2, %f48 1: FREG_FROB(f16,f18,f20,f22,f24,f26,f28,f30,f32) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f32,f34,f36,f38,f40,f42,f44,f46,f0) - STORE_JUMP(o0, f48, 40f) membar #Sync + STORE_JUMP(o0, f48, 40f) 2: FREG_FROB(f32,f34,f36,f38,f40,f42,f44,f46,f0) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f0, f2, f4, f6, f8, f10,f12,f14,f16) - STORE_JUMP(o0, f48, 48f) membar #Sync + STORE_JUMP(o0, f48, 48f) 3: FREG_FROB(f0, f2, f4, f6, f8, f10,f12,f14,f16) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f16,f18,f20,f22,f24,f26,f28,f30,f32) - STORE_JUMP(o0, f48, 56f) membar #Sync + STORE_JUMP(o0, f48, 56f) 1: FREG_FROB(f2, f4, f6, f8, f10,f12,f14,f16,f18) LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f) @@ -260,17 +263,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ ba,pt %xcc, 1b+4 faligndata %f2, %f4, %f48 1: FREG_FROB(f18,f20,f22,f24,f26,f28,f30,f32,f34) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f34,f36,f38,f40,f42,f44,f46,f0, f2) - STORE_JUMP(o0, f48, 41f) membar #Sync + STORE_JUMP(o0, f48, 41f) 2: FREG_FROB(f34,f36,f38,f40,f42,f44,f46,f0, f2) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f2, f4, f6, f8, f10,f12,f14,f16,f18) - STORE_JUMP(o0, f48, 49f) membar #Sync + STORE_JUMP(o0, f48, 49f) 3: FREG_FROB(f2, f4, f6, f8, f10,f12,f14,f16,f18) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f18,f20,f22,f24,f26,f28,f30,f32,f34) - STORE_JUMP(o0, f48, 57f) membar #Sync + STORE_JUMP(o0, f48, 57f) 1: FREG_FROB(f4, f6, f8, f10,f12,f14,f16,f18,f20) LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f) @@ -281,17 +284,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ ba,pt %xcc, 1b+4 faligndata %f4, %f6, %f48 1: FREG_FROB(f20,f22,f24,f26,f28,f30,f32,f34,f36) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f36,f38,f40,f42,f44,f46,f0, f2, f4) - STORE_JUMP(o0, f48, 42f) membar #Sync + STORE_JUMP(o0, f48, 42f) 2: FREG_FROB(f36,f38,f40,f42,f44,f46,f0, f2, f4) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f4, f6, f8, f10,f12,f14,f16,f18,f20) - STORE_JUMP(o0, f48, 50f) membar #Sync + STORE_JUMP(o0, f48, 50f) 3: FREG_FROB(f4, f6, f8, f10,f12,f14,f16,f18,f20) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f20,f22,f24,f26,f28,f30,f32,f34,f36) - STORE_JUMP(o0, f48, 58f) membar #Sync + STORE_JUMP(o0, f48, 58f) 1: FREG_FROB(f6, f8, f10,f12,f14,f16,f18,f20,f22) LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f) @@ -302,17 +305,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ ba,pt %xcc, 1b+4 faligndata %f6, %f8, %f48 1: FREG_FROB(f22,f24,f26,f28,f30,f32,f34,f36,f38) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f38,f40,f42,f44,f46,f0, f2, f4, f6) - STORE_JUMP(o0, f48, 43f) membar #Sync + STORE_JUMP(o0, f48, 43f) 2: FREG_FROB(f38,f40,f42,f44,f46,f0, f2, f4, f6) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f6, f8, f10,f12,f14,f16,f18,f20,f22) - STORE_JUMP(o0, f48, 51f) membar #Sync + STORE_JUMP(o0, f48, 51f) 3: FREG_FROB(f6, f8, f10,f12,f14,f16,f18,f20,f22) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f22,f24,f26,f28,f30,f32,f34,f36,f38) - STORE_JUMP(o0, f48, 59f) membar #Sync + STORE_JUMP(o0, f48, 59f) 1: FREG_FROB(f8, f10,f12,f14,f16,f18,f20,f22,f24) LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f) @@ -323,17 +326,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ ba,pt %xcc, 1b+4 faligndata %f8, %f10, %f48 1: FREG_FROB(f24,f26,f28,f30,f32,f34,f36,f38,f40) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f40,f42,f44,f46,f0, f2, f4, f6, f8) - STORE_JUMP(o0, f48, 44f) membar #Sync + STORE_JUMP(o0, f48, 44f) 2: FREG_FROB(f40,f42,f44,f46,f0, f2, f4, f6, f8) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f8, f10,f12,f14,f16,f18,f20,f22,f24) - STORE_JUMP(o0, f48, 52f) membar #Sync + STORE_JUMP(o0, f48, 52f) 3: FREG_FROB(f8, f10,f12,f14,f16,f18,f20,f22,f24) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f24,f26,f28,f30,f32,f34,f36,f38,f40) - STORE_JUMP(o0, f48, 60f) membar #Sync + STORE_JUMP(o0, f48, 60f) 1: FREG_FROB(f10,f12,f14,f16,f18,f20,f22,f24,f26) LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f) @@ -344,17 +347,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ ba,pt %xcc, 1b+4 faligndata %f10, %f12, %f48 1: FREG_FROB(f26,f28,f30,f32,f34,f36,f38,f40,f42) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f42,f44,f46,f0, f2, f4, f6, f8, f10) - STORE_JUMP(o0, f48, 45f) membar #Sync + STORE_JUMP(o0, f48, 45f) 2: FREG_FROB(f42,f44,f46,f0, f2, f4, f6, f8, f10) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f10,f12,f14,f16,f18,f20,f22,f24,f26) - STORE_JUMP(o0, f48, 53f) membar #Sync + STORE_JUMP(o0, f48, 53f) 3: FREG_FROB(f10,f12,f14,f16,f18,f20,f22,f24,f26) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f26,f28,f30,f32,f34,f36,f38,f40,f42) - STORE_JUMP(o0, f48, 61f) membar #Sync + STORE_JUMP(o0, f48, 61f) 1: FREG_FROB(f12,f14,f16,f18,f20,f22,f24,f26,f28) LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f) @@ -365,17 +368,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ ba,pt %xcc, 1b+4 faligndata %f12, %f14, %f48 1: FREG_FROB(f28,f30,f32,f34,f36,f38,f40,f42,f44) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f44,f46,f0, f2, f4, f6, f8, f10,f12) - STORE_JUMP(o0, f48, 46f) membar #Sync + STORE_JUMP(o0, f48, 46f) 2: FREG_FROB(f44,f46,f0, f2, f4, f6, f8, f10,f12) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f12,f14,f16,f18,f20,f22,f24,f26,f28) - STORE_JUMP(o0, f48, 54f) membar #Sync + STORE_JUMP(o0, f48, 54f) 3: FREG_FROB(f12,f14,f16,f18,f20,f22,f24,f26,f28) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f28,f30,f32,f34,f36,f38,f40,f42,f44) - STORE_JUMP(o0, f48, 62f) membar #Sync + STORE_JUMP(o0, f48, 62f) 1: FREG_FROB(f14,f16,f18,f20,f22,f24,f26,f28,f30) LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f) @@ -386,17 +389,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ ba,pt %xcc, 1b+4 faligndata %f14, %f16, %f48 1: FREG_FROB(f30,f32,f34,f36,f38,f40,f42,f44,f46) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f46,f0, f2, f4, f6, f8, f10,f12,f14) - STORE_JUMP(o0, f48, 47f) membar #Sync + STORE_JUMP(o0, f48, 47f) 2: FREG_FROB(f46,f0, f2, f4, f6, f8, f10,f12,f14) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f14,f16,f18,f20,f22,f24,f26,f28,f30) - STORE_JUMP(o0, f48, 55f) membar #Sync + STORE_JUMP(o0, f48, 55f) 3: FREG_FROB(f14,f16,f18,f20,f22,f24,f26,f28,f30) - STORE_SYNC(o0, f48) membar #Sync + STORE_SYNC(o0, f48) FREG_FROB(f30,f32,f34,f36,f38,f40,f42,f44,f46) - STORE_JUMP(o0, f48, 63f) membar #Sync + STORE_JUMP(o0, f48, 63f) 40: FINISH_VISCHUNK(o0, f0, f2, g3) 41: FINISH_VISCHUNK(o0, f2, f4, g3) diff --git a/arch/sparc64/lib/VISsave.S b/arch/sparc64/lib/VISsave.S index 65e328d600a8..4e18989bd602 100644 --- a/arch/sparc64/lib/VISsave.S +++ b/arch/sparc64/lib/VISsave.S @@ -72,7 +72,11 @@ vis1: ldub [%g6 + TI_FPSAVED], %g3 stda %f48, [%g3 + %g1] ASI_BLK_P 5: membar #Sync - jmpl %g7 + %g0, %g0 + ba,pt %xcc, 80f + nop + + .align 32 +80: jmpl %g7 + %g0, %g0 nop 6: ldub [%g3 + TI_FPSAVED], %o5 @@ -87,8 +91,11 @@ vis1: ldub [%g6 + TI_FPSAVED], %g3 stda %f32, [%g2 + %g1] ASI_BLK_P stda %f48, [%g3 + %g1] ASI_BLK_P membar #Sync - jmpl %g7 + %g0, %g0 + ba,pt %xcc, 80f + nop + .align 32 +80: jmpl %g7 + %g0, %g0 nop .align 32 @@ -126,6 +133,10 @@ VISenterhalf: stda %f0, [%g2 + %g1] ASI_BLK_P stda %f16, [%g3 + %g1] ASI_BLK_P membar #Sync + ba,pt %xcc, 4f + nop + + .align 32 4: and %o5, FPRS_DU, %o5 jmpl %g7 + %g0, %g0 wr %o5, FPRS_FEF, %fprs diff --git a/arch/sparc64/lib/atomic.S b/arch/sparc64/lib/atomic.S index e528b8d1a3e6..faf87c31598b 100644 --- a/arch/sparc64/lib/atomic.S +++ b/arch/sparc64/lib/atomic.S @@ -7,18 +7,6 @@ #include <linux/config.h> #include <asm/asi.h> - /* On SMP we need to use memory barriers to ensure - * correct memory operation ordering, nop these out - * for uniprocessor. - */ -#ifdef CONFIG_SMP -#define ATOMIC_PRE_BARRIER membar #StoreLoad | #LoadLoad -#define ATOMIC_POST_BARRIER membar #StoreLoad | #StoreStore -#else -#define ATOMIC_PRE_BARRIER nop -#define ATOMIC_POST_BARRIER nop -#endif - .text /* Two versions of the atomic routines, one that @@ -52,6 +40,24 @@ atomic_sub: /* %o0 = decrement, %o1 = atomic_ptr */ nop .size atomic_sub, .-atomic_sub + /* On SMP we need to use memory barriers to ensure + * correct memory operation ordering, nop these out + * for uniprocessor. + */ +#ifdef CONFIG_SMP + +#define ATOMIC_PRE_BARRIER membar #StoreLoad | #LoadLoad; +#define ATOMIC_POST_BARRIER \ + ba,pt %xcc, 80b; \ + membar #StoreLoad | #StoreStore + +80: retl + nop +#else +#define ATOMIC_PRE_BARRIER +#define ATOMIC_POST_BARRIER +#endif + .globl atomic_add_ret .type atomic_add_ret,#function atomic_add_ret: /* %o0 = increment, %o1 = atomic_ptr */ @@ -62,9 +68,10 @@ atomic_add_ret: /* %o0 = increment, %o1 = atomic_ptr */ cmp %g1, %g7 bne,pn %icc, 1b add %g7, %o0, %g7 + sra %g7, 0, %o0 ATOMIC_POST_BARRIER retl - sra %g7, 0, %o0 + nop .size atomic_add_ret, .-atomic_add_ret .globl atomic_sub_ret @@ -77,9 +84,10 @@ atomic_sub_ret: /* %o0 = decrement, %o1 = atomic_ptr */ cmp %g1, %g7 bne,pn %icc, 1b sub %g7, %o0, %g7 + sra %g7, 0, %o0 ATOMIC_POST_BARRIER retl - sra %g7, 0, %o0 + nop .size atomic_sub_ret, .-atomic_sub_ret .globl atomic64_add @@ -118,9 +126,10 @@ atomic64_add_ret: /* %o0 = increment, %o1 = atomic_ptr */ cmp %g1, %g7 bne,pn %xcc, 1b add %g7, %o0, %g7 + mov %g7, %o0 ATOMIC_POST_BARRIER retl - mov %g7, %o0 + nop .size atomic64_add_ret, .-atomic64_add_ret .globl atomic64_sub_ret @@ -133,7 +142,8 @@ atomic64_sub_ret: /* %o0 = decrement, %o1 = atomic_ptr */ cmp %g1, %g7 bne,pn %xcc, 1b sub %g7, %o0, %g7 + mov %g7, %o0 ATOMIC_POST_BARRIER retl - mov %g7, %o0 + nop .size atomic64_sub_ret, .-atomic64_sub_ret diff --git a/arch/sparc64/lib/bitops.S b/arch/sparc64/lib/bitops.S index 886dcd2b376a..31afbfe6c1e8 100644 --- a/arch/sparc64/lib/bitops.S +++ b/arch/sparc64/lib/bitops.S @@ -7,20 +7,26 @@ #include <linux/config.h> #include <asm/asi.h> + .text + /* On SMP we need to use memory barriers to ensure * correct memory operation ordering, nop these out * for uniprocessor. */ + #ifdef CONFIG_SMP #define BITOP_PRE_BARRIER membar #StoreLoad | #LoadLoad -#define BITOP_POST_BARRIER membar #StoreLoad | #StoreStore +#define BITOP_POST_BARRIER \ + ba,pt %xcc, 80b; \ + membar #StoreLoad | #StoreStore + +80: retl + nop #else -#define BITOP_PRE_BARRIER nop -#define BITOP_POST_BARRIER nop +#define BITOP_PRE_BARRIER +#define BITOP_POST_BARRIER #endif - .text - .globl test_and_set_bit .type test_and_set_bit,#function test_and_set_bit: /* %o0=nr, %o1=addr */ @@ -37,10 +43,11 @@ test_and_set_bit: /* %o0=nr, %o1=addr */ cmp %g7, %g1 bne,pn %xcc, 1b and %g7, %o2, %g2 - BITOP_POST_BARRIER clr %o0 + movrne %g2, 1, %o0 + BITOP_POST_BARRIER retl - movrne %g2, 1, %o0 + nop .size test_and_set_bit, .-test_and_set_bit .globl test_and_clear_bit @@ -59,10 +66,11 @@ test_and_clear_bit: /* %o0=nr, %o1=addr */ cmp %g7, %g1 bne,pn %xcc, 1b and %g7, %o2, %g2 - BITOP_POST_BARRIER clr %o0 + movrne %g2, 1, %o0 + BITOP_POST_BARRIER retl - movrne %g2, 1, %o0 + nop .size test_and_clear_bit, .-test_and_clear_bit .globl test_and_change_bit @@ -81,10 +89,11 @@ test_and_change_bit: /* %o0=nr, %o1=addr */ cmp %g7, %g1 bne,pn %xcc, 1b and %g7, %o2, %g2 - BITOP_POST_BARRIER clr %o0 + movrne %g2, 1, %o0 + BITOP_POST_BARRIER retl - movrne %g2, 1, %o0 + nop .size test_and_change_bit, .-test_and_change_bit .globl set_bit diff --git a/arch/sparc64/lib/debuglocks.c b/arch/sparc64/lib/debuglocks.c index c421e0c65325..f03344cf784e 100644 --- a/arch/sparc64/lib/debuglocks.c +++ b/arch/sparc64/lib/debuglocks.c @@ -252,8 +252,9 @@ wlock_again: " andn %%g1, %%g3, %%g7\n" " casx [%0], %%g1, %%g7\n" " cmp %%g1, %%g7\n" +" membar #StoreLoad | #StoreStore\n" " bne,pn %%xcc, 1b\n" -" membar #StoreLoad | #StoreStore" +" nop" : /* no outputs */ : "r" (&(rw->lock)) : "g3", "g1", "g7", "cc", "memory"); @@ -351,8 +352,9 @@ int _do_write_trylock (rwlock_t *rw, char *str) " andn %%g1, %%g3, %%g7\n" " casx [%0], %%g1, %%g7\n" " cmp %%g1, %%g7\n" +" membar #StoreLoad | #StoreStore\n" " bne,pn %%xcc, 1b\n" -" membar #StoreLoad | #StoreStore" +" nop" : /* no outputs */ : "r" (&(rw->lock)) : "g3", "g1", "g7", "cc", "memory"); diff --git a/arch/sparc64/lib/dec_and_lock.S b/arch/sparc64/lib/dec_and_lock.S index 7e6fdaebedba..8ee288dd0afc 100644 --- a/arch/sparc64/lib/dec_and_lock.S +++ b/arch/sparc64/lib/dec_and_lock.S @@ -48,8 +48,9 @@ start_to_zero: #endif to_zero: ldstub [%o1], %g3 + membar #StoreLoad | #StoreStore brnz,pn %g3, spin_on_lock - membar #StoreLoad | #StoreStore + nop loop2: cas [%o0], %g2, %g7 /* ASSERT(g7 == 0) */ cmp %g2, %g7 @@ -71,8 +72,9 @@ loop2: cas [%o0], %g2, %g7 /* ASSERT(g7 == 0) */ nop spin_on_lock: ldub [%o1], %g3 + membar #LoadLoad brnz,pt %g3, spin_on_lock - membar #LoadLoad + nop ba,pt %xcc, to_zero nop nop diff --git a/arch/sparc64/lib/rwsem.S b/arch/sparc64/lib/rwsem.S index 174ff7b9164c..75f0e6b951d6 100644 --- a/arch/sparc64/lib/rwsem.S +++ b/arch/sparc64/lib/rwsem.S @@ -17,8 +17,9 @@ __down_read: bne,pn %icc, 1b add %g7, 1, %g7 cmp %g7, 0 + membar #StoreLoad | #StoreStore bl,pn %icc, 3f - membar #StoreLoad | #StoreStore + nop 2: retl nop @@ -57,8 +58,9 @@ __down_write: cmp %g3, %g7 bne,pn %icc, 1b cmp %g7, 0 + membar #StoreLoad | #StoreStore bne,pn %icc, 3f - membar #StoreLoad | #StoreStore + nop 2: retl nop 3: @@ -97,8 +99,9 @@ __up_read: cmp %g1, %g7 bne,pn %icc, 1b cmp %g7, 0 + membar #StoreLoad | #StoreStore bl,pn %icc, 3f - membar #StoreLoad | #StoreStore + nop 2: retl nop 3: sethi %hi(RWSEM_ACTIVE_MASK), %g1 @@ -126,8 +129,9 @@ __up_write: bne,pn %icc, 1b sub %g7, %g1, %g7 cmp %g7, 0 + membar #StoreLoad | #StoreStore bl,pn %icc, 3f - membar #StoreLoad | #StoreStore + nop 2: retl nop @@ -151,8 +155,9 @@ __downgrade_write: bne,pn %icc, 1b sub %g7, %g1, %g7 cmp %g7, 0 + membar #StoreLoad | #StoreStore bl,pn %icc, 3f - membar #StoreLoad | #StoreStore + nop 2: retl nop diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c index 3ffee7b51aed..52e9375288a9 100644 --- a/arch/sparc64/mm/fault.c +++ b/arch/sparc64/mm/fault.c @@ -34,22 +34,6 @@ extern struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS]; /* - * To debug kernel during syscall entry. - */ -void syscall_trace_entry(struct pt_regs *regs) -{ - printk("scall entry: %s[%d]/cpu%d: %d\n", current->comm, current->pid, smp_processor_id(), (int) regs->u_regs[UREG_G1]); -} - -/* - * To debug kernel during syscall exit. - */ -void syscall_trace_exit(struct pt_regs *regs) -{ - printk("scall exit: %s[%d]/cpu%d: %d\n", current->comm, current->pid, smp_processor_id(), (int) regs->u_regs[UREG_G1]); -} - -/* * To debug kernel to catch accesses to certain virtual/physical addresses. * Mode = 0 selects physical watchpoints, mode = 1 selects virtual watchpoints. * flags = VM_READ watches memread accesses, flags = VM_WRITE watches memwrite accesses. diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 9c5222075da9..3fbaf342a452 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -121,23 +121,33 @@ __inline__ void flush_dcache_page_impl(struct page *page) } #define PG_dcache_dirty PG_arch_1 +#define PG_dcache_cpu_shift 24 +#define PG_dcache_cpu_mask (256 - 1) + +#if NR_CPUS > 256 +#error D-cache dirty tracking and thread_info->cpu need fixing for > 256 cpus +#endif #define dcache_dirty_cpu(page) \ - (((page)->flags >> 24) & (NR_CPUS - 1UL)) + (((page)->flags >> PG_dcache_cpu_shift) & PG_dcache_cpu_mask) static __inline__ void set_dcache_dirty(struct page *page, int this_cpu) { unsigned long mask = this_cpu; - unsigned long non_cpu_bits = ~((NR_CPUS - 1UL) << 24UL); - mask = (mask << 24) | (1UL << PG_dcache_dirty); + unsigned long non_cpu_bits; + + non_cpu_bits = ~(PG_dcache_cpu_mask << PG_dcache_cpu_shift); + mask = (mask << PG_dcache_cpu_shift) | (1UL << PG_dcache_dirty); + __asm__ __volatile__("1:\n\t" "ldx [%2], %%g7\n\t" "and %%g7, %1, %%g1\n\t" "or %%g1, %0, %%g1\n\t" "casx [%2], %%g7, %%g1\n\t" "cmp %%g7, %%g1\n\t" + "membar #StoreLoad | #StoreStore\n\t" "bne,pn %%xcc, 1b\n\t" - " membar #StoreLoad | #StoreStore" + " nop" : /* no outputs */ : "r" (mask), "r" (non_cpu_bits), "r" (&page->flags) : "g1", "g7"); @@ -150,19 +160,21 @@ static __inline__ void clear_dcache_dirty_cpu(struct page *page, unsigned long c __asm__ __volatile__("! test_and_clear_dcache_dirty\n" "1:\n\t" "ldx [%2], %%g7\n\t" - "srlx %%g7, 24, %%g1\n\t" + "srlx %%g7, %4, %%g1\n\t" "and %%g1, %3, %%g1\n\t" "cmp %%g1, %0\n\t" "bne,pn %%icc, 2f\n\t" " andn %%g7, %1, %%g1\n\t" "casx [%2], %%g7, %%g1\n\t" "cmp %%g7, %%g1\n\t" + "membar #StoreLoad | #StoreStore\n\t" "bne,pn %%xcc, 1b\n\t" - " membar #StoreLoad | #StoreStore\n" + " nop\n" "2:" : /* no outputs */ : "r" (cpu), "r" (mask), "r" (&page->flags), - "i" (NR_CPUS - 1UL) + "i" (PG_dcache_cpu_mask), + "i" (PG_dcache_cpu_shift) : "g1", "g7"); } @@ -178,7 +190,8 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t p if (pfn_valid(pfn) && (page = pfn_to_page(pfn), page_mapping(page)) && ((pg_flags = page->flags) & (1UL << PG_dcache_dirty))) { - int cpu = ((pg_flags >> 24) & (NR_CPUS - 1UL)); + int cpu = ((pg_flags >> PG_dcache_cpu_shift) & + PG_dcache_cpu_mask); int this_cpu = get_cpu(); /* This is just to optimize away some function calls diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 7a0934321010..363770893797 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -72,6 +72,7 @@ __flush_tlb_pending: flush %g6 retl wrpr %g7, 0x0, %pstate + nop .align 32 .globl __flush_tlb_kernel_range @@ -249,7 +250,7 @@ __cheetah_flush_tlb_mm: /* 15 insns */ retl wrpr %g7, 0x0, %pstate -__cheetah_flush_tlb_pending: /* 22 insns */ +__cheetah_flush_tlb_pending: /* 23 insns */ /* %o0 = context, %o1 = nr, %o2 = vaddrs[] */ rdpr %pstate, %g7 sllx %o1, 3, %o1 @@ -266,8 +267,9 @@ __cheetah_flush_tlb_pending: /* 22 insns */ andn %o3, 1, %o3 stxa %g0, [%o3] ASI_IMMU_DEMAP 2: stxa %g0, [%o3] ASI_DMMU_DEMAP + membar #Sync brnz,pt %o1, 1b - membar #Sync + nop stxa %g2, [%o4] ASI_DMMU flush %g6 wrpr %g0, 0, %tl @@ -316,7 +318,7 @@ cheetah_patch_cachetlbops: sethi %hi(__cheetah_flush_tlb_pending), %o1 or %o1, %lo(__cheetah_flush_tlb_pending), %o1 call cheetah_patch_one - mov 22, %o2 + mov 23, %o2 #ifdef DCACHE_ALIASING_POSSIBLE sethi %hi(__flush_dcache_page), %o0 diff --git a/arch/sparc64/solaris/entry64.S b/arch/sparc64/solaris/entry64.S index 0cc9dad75c5e..4b6ae583c0a3 100644 --- a/arch/sparc64/solaris/entry64.S +++ b/arch/sparc64/solaris/entry64.S @@ -24,8 +24,9 @@ .text solaris_syscall_trace: + add %sp, PTREGS_OFF, %o0 call syscall_trace - nop + mov 0, %o1 srl %i0, 0, %o0 mov %i4, %o4 srl %i1, 0, %o1 @@ -159,8 +160,10 @@ ret_from_solaris: stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC] !npc = npc+4 solaris_syscall_trace2: + add %sp, PTREGS_OFF, %o0 call syscall_trace - add %l1, 0x4, %l2 /* npc = npc+4 */ + mov 1, %o1 + add %l1, 0x4, %l2 /* npc = npc+4 */ andcc %l1, 1, %g0 bne,pn %icc, 2b nop diff --git a/arch/sparc64/solaris/socket.c b/arch/sparc64/solaris/socket.c index 06740582717e..d3a66ea74a7f 100644 --- a/arch/sparc64/solaris/socket.c +++ b/arch/sparc64/solaris/socket.c @@ -16,6 +16,7 @@ #include <linux/net.h> #include <linux/compat.h> #include <net/compat.h> +#include <net/sock.h> #include <asm/uaccess.h> #include <asm/string.h> @@ -297,121 +298,165 @@ asmlinkage int solaris_sendmsg(int fd, struct sol_nmsghdr __user *user_msg, unsi { struct socket *sock; char address[MAX_SOCK_ADDR]; - struct iovec iov[UIO_FASTIOV]; + struct iovec iovstack[UIO_FASTIOV], *iov = iovstack; unsigned char ctl[sizeof(struct cmsghdr) + 20]; unsigned char *ctl_buf = ctl; - struct msghdr kern_msg; - int err, total_len; + struct msghdr msg_sys; + int err, ctl_len, iov_size, total_len; - if(msghdr_from_user32_to_kern(&kern_msg, user_msg)) - return -EFAULT; - if(kern_msg.msg_iovlen > UIO_MAXIOV) - return -EINVAL; - err = verify_compat_iovec(&kern_msg, iov, address, VERIFY_READ); - if (err < 0) + err = -EFAULT; + if (msghdr_from_user32_to_kern(&msg_sys, user_msg)) + goto out; + + sock = sockfd_lookup(fd, &err); + if (!sock) goto out; + + /* do not move before msg_sys is valid */ + err = -EMSGSIZE; + if (msg_sys.msg_iovlen > UIO_MAXIOV) + goto out_put; + + /* Check whether to allocate the iovec area*/ + err = -ENOMEM; + iov_size = msg_sys.msg_iovlen * sizeof(struct iovec); + if (msg_sys.msg_iovlen > UIO_FASTIOV) { + iov = sock_kmalloc(sock->sk, iov_size, GFP_KERNEL); + if (!iov) + goto out_put; + } + + err = verify_compat_iovec(&msg_sys, iov, address, VERIFY_READ); + if (err < 0) + goto out_freeiov; total_len = err; - if(kern_msg.msg_controllen) { - struct sol_cmsghdr __user *ucmsg = kern_msg.msg_control; + err = -ENOBUFS; + if (msg_sys.msg_controllen > INT_MAX) + goto out_freeiov; + + ctl_len = msg_sys.msg_controllen; + if (ctl_len) { + struct sol_cmsghdr __user *ucmsg = msg_sys.msg_control; unsigned long *kcmsg; compat_size_t cmlen; - if (kern_msg.msg_controllen <= sizeof(compat_size_t)) - return -EINVAL; + err = -EINVAL; + if (ctl_len <= sizeof(compat_size_t)) + goto out_freeiov; - if(kern_msg.msg_controllen > sizeof(ctl)) { + if (ctl_len > sizeof(ctl)) { err = -ENOBUFS; - ctl_buf = kmalloc(kern_msg.msg_controllen, GFP_KERNEL); - if(!ctl_buf) + ctl_buf = kmalloc(ctl_len, GFP_KERNEL); + if (!ctl_buf) goto out_freeiov; } __get_user(cmlen, &ucmsg->cmsg_len); kcmsg = (unsigned long *) ctl_buf; *kcmsg++ = (unsigned long)cmlen; err = -EFAULT; - if(copy_from_user(kcmsg, &ucmsg->cmsg_level, - kern_msg.msg_controllen - sizeof(compat_size_t))) + if (copy_from_user(kcmsg, &ucmsg->cmsg_level, + ctl_len - sizeof(compat_size_t))) goto out_freectl; - kern_msg.msg_control = ctl_buf; + msg_sys.msg_control = ctl_buf; } - kern_msg.msg_flags = solaris_to_linux_msgflags(user_flags); + msg_sys.msg_flags = solaris_to_linux_msgflags(user_flags); - lock_kernel(); - sock = sockfd_lookup(fd, &err); - if (sock != NULL) { - if (sock->file->f_flags & O_NONBLOCK) - kern_msg.msg_flags |= MSG_DONTWAIT; - err = sock_sendmsg(sock, &kern_msg, total_len); - sockfd_put(sock); - } - unlock_kernel(); + if (sock->file->f_flags & O_NONBLOCK) + msg_sys.msg_flags |= MSG_DONTWAIT; + err = sock_sendmsg(sock, &msg_sys, total_len); out_freectl: - /* N.B. Use kfree here, as kern_msg.msg_controllen might change? */ - if(ctl_buf != ctl) - kfree(ctl_buf); + if (ctl_buf != ctl) + sock_kfree_s(sock->sk, ctl_buf, ctl_len); out_freeiov: - if(kern_msg.msg_iov != iov) - kfree(kern_msg.msg_iov); -out: + if (iov != iovstack) + sock_kfree_s(sock->sk, iov, iov_size); +out_put: + sockfd_put(sock); +out: return err; } asmlinkage int solaris_recvmsg(int fd, struct sol_nmsghdr __user *user_msg, unsigned int user_flags) { - struct iovec iovstack[UIO_FASTIOV]; - struct msghdr kern_msg; - char addr[MAX_SOCK_ADDR]; struct socket *sock; + struct iovec iovstack[UIO_FASTIOV]; struct iovec *iov = iovstack; + struct msghdr msg_sys; + unsigned long cmsg_ptr; + int err, iov_size, total_len, len; + + /* kernel mode address */ + char addr[MAX_SOCK_ADDR]; + + /* user mode address pointers */ struct sockaddr __user *uaddr; int __user *uaddr_len; - unsigned long cmsg_ptr; - int err, total_len, len = 0; - if(msghdr_from_user32_to_kern(&kern_msg, user_msg)) + if (msghdr_from_user32_to_kern(&msg_sys, user_msg)) return -EFAULT; - if(kern_msg.msg_iovlen > UIO_MAXIOV) - return -EINVAL; - uaddr = kern_msg.msg_name; + sock = sockfd_lookup(fd, &err); + if (!sock) + goto out; + + err = -EMSGSIZE; + if (msg_sys.msg_iovlen > UIO_MAXIOV) + goto out_put; + + /* Check whether to allocate the iovec area*/ + err = -ENOMEM; + iov_size = msg_sys.msg_iovlen * sizeof(struct iovec); + if (msg_sys.msg_iovlen > UIO_FASTIOV) { + iov = sock_kmalloc(sock->sk, iov_size, GFP_KERNEL); + if (!iov) + goto out_put; + } + + /* + * Save the user-mode address (verify_iovec will change the + * kernel msghdr to use the kernel address space) + */ + + uaddr = (void __user *) msg_sys.msg_name; uaddr_len = &user_msg->msg_namelen; - err = verify_compat_iovec(&kern_msg, iov, addr, VERIFY_WRITE); + err = verify_compat_iovec(&msg_sys, iov, addr, VERIFY_WRITE); if (err < 0) - goto out; + goto out_freeiov; total_len = err; - cmsg_ptr = (unsigned long) kern_msg.msg_control; - kern_msg.msg_flags = 0; + cmsg_ptr = (unsigned long) msg_sys.msg_control; + msg_sys.msg_flags = MSG_CMSG_COMPAT; - lock_kernel(); - sock = sockfd_lookup(fd, &err); - if (sock != NULL) { - if (sock->file->f_flags & O_NONBLOCK) - user_flags |= MSG_DONTWAIT; - err = sock_recvmsg(sock, &kern_msg, total_len, user_flags); - if(err >= 0) - len = err; - sockfd_put(sock); - } - unlock_kernel(); - - if(uaddr != NULL && err >= 0) - err = move_addr_to_user(addr, kern_msg.msg_namelen, uaddr, uaddr_len); - if(err >= 0) { - err = __put_user(linux_to_solaris_msgflags(kern_msg.msg_flags), &user_msg->msg_flags); - if(!err) { - /* XXX Convert cmsg back into userspace 32-bit format... */ - err = __put_user((unsigned long)kern_msg.msg_control - cmsg_ptr, - &user_msg->msg_controllen); - } + if (sock->file->f_flags & O_NONBLOCK) + user_flags |= MSG_DONTWAIT; + + err = sock_recvmsg(sock, &msg_sys, total_len, user_flags); + if(err < 0) + goto out_freeiov; + + len = err; + + if (uaddr != NULL) { + err = move_addr_to_user(addr, msg_sys.msg_namelen, uaddr, uaddr_len); + if (err < 0) + goto out_freeiov; } + err = __put_user(linux_to_solaris_msgflags(msg_sys.msg_flags), &user_msg->msg_flags); + if (err) + goto out_freeiov; + err = __put_user((unsigned long)msg_sys.msg_control - cmsg_ptr, + &user_msg->msg_controllen); + if (err) + goto out_freeiov; + err = len; - if(kern_msg.msg_iov != iov) - kfree(kern_msg.msg_iov); +out_freeiov: + if (iov != iovstack) + sock_kfree_s(sock->sk, iov, iov_size); +out_put: + sockfd_put(sock); out: - if(err < 0) - return err; - return len; + return err; } diff --git a/arch/um/Kconfig b/arch/um/Kconfig index b8e952c88fd1..f945444df49c 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -74,6 +74,7 @@ config MODE_SKAS option will shrink the UML binary slightly. source "arch/um/Kconfig_arch" +source "mm/Kconfig" config LD_SCRIPT_STATIC bool @@ -127,7 +128,6 @@ config HOSTFS config HPPFS tristate "HoneyPot ProcFS (EXPERIMENTAL)" - depends on BROKEN help hppfs (HoneyPot ProcFS) is a filesystem which allows UML /proc entries to be overridden, removed, or fabricated from the host. @@ -140,8 +140,9 @@ config HPPFS You only need this if you are setting up a UML honeypot. Otherwise, it is safe to say 'N' here. - If you are actively using it, please ask for it to be fixed. In this - moment, it does not work on 2.6 (it works somehow on 2.4). + If you are actively using it, please report any problems, since it's + getting fixed. In this moment, it is experimental on 2.6 (it works on + 2.4). config MCONSOLE bool "Management console" @@ -274,6 +275,8 @@ endmenu source "init/Kconfig" +source "net/Kconfig" + source "drivers/base/Kconfig" source "arch/um/Kconfig_char" @@ -286,7 +289,7 @@ config NETDEVICES source "arch/um/Kconfig_net" -source "net/Kconfig" +source "drivers/net/Kconfig" source "fs/Kconfig" diff --git a/arch/um/Kconfig_i386 b/arch/um/Kconfig_i386 index e41f3748d30f..27c18a8d9d17 100644 --- a/arch/um/Kconfig_i386 +++ b/arch/um/Kconfig_i386 @@ -19,6 +19,18 @@ config 3_LEVEL_PGTABLES memory. All the memory that can't be mapped directly will be treated as high memory. +config STUB_CODE + hex + default 0xbfffe000 + +config STUB_DATA + hex + default 0xbffff000 + +config STUB_START + hex + default STUB_CODE + config ARCH_HAS_SC_SIGNALS bool default y diff --git a/arch/um/Kconfig_net b/arch/um/Kconfig_net index 1c2f9a70d91d..fa2ab2dd78b7 100644 --- a/arch/um/Kconfig_net +++ b/arch/um/Kconfig_net @@ -135,7 +135,7 @@ config UML_NET_MCAST config UML_NET_PCAP bool "pcap transport" - depends on UML_NET && BROKEN + depends on UML_NET && EXPERIMENTAL help The pcap transport makes a pcap packet stream on the host look like an ethernet device inside UML. This is useful for making diff --git a/arch/um/Kconfig_x86_64 b/arch/um/Kconfig_x86_64 index f162f50f0b17..735a047c890c 100644 --- a/arch/um/Kconfig_x86_64 +++ b/arch/um/Kconfig_x86_64 @@ -14,6 +14,18 @@ config 3_LEVEL_PGTABLES bool default y +config STUB_CODE + hex + default 0x7fbfffe000 + +config STUB_DATA + hex + default 0x7fbffff000 + +config STUB_START + hex + default STUB_CODE + config ARCH_HAS_SC_SIGNALS bool default n diff --git a/arch/um/Makefile b/arch/um/Makefile index 3f073902351f..f5a83a72aa75 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -51,25 +51,26 @@ MRPROPER_DIRS += $(ARCH_DIR)/include2 endif SYS_DIR := $(ARCH_DIR)/include/sysdep-$(SUBARCH) -include $(srctree)/$(ARCH_DIR)/Makefile-$(SUBARCH) +# -Dvmap=kernel_vmap affects everything, and prevents anything from +# referencing the libpcap.o symbol so named. + +CFLAGS += $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \ + $(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap -core-y += $(SUBARCH_CORE) -libs-y += $(SUBARCH_LIBS) +USER_CFLAGS := $(patsubst -I%,,$(CFLAGS)) +USER_CFLAGS := $(patsubst -D__KERNEL__,,$(USER_CFLAGS)) $(ARCH_INCLUDE) \ + $(MODE_INCLUDE) # -Derrno=kernel_errno - This turns all kernel references to errno into # kernel_errno to separate them from the libc errno. This allows -fno-common # in CFLAGS. Otherwise, it would cause ld to complain about the two different # errnos. -CFLAGS += $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \ - $(ARCH_INCLUDE) $(MODE_INCLUDE) - -USER_CFLAGS := $(patsubst -I%,,$(CFLAGS)) -USER_CFLAGS := $(patsubst -D__KERNEL__,,$(USER_CFLAGS)) $(ARCH_INCLUDE) \ - $(MODE_INCLUDE) $(ARCH_USER_CFLAGS) CFLAGS += -Derrno=kernel_errno -Dsigprocmask=kernel_sigprocmask CFLAGS += $(call cc-option,-fno-unit-at-a-time,) +include $(srctree)/$(ARCH_DIR)/Makefile-$(SUBARCH) + #This will adjust *FLAGS accordingly to the platform. include $(srctree)/$(ARCH_DIR)/Makefile-os-$(OS) @@ -116,18 +117,19 @@ CONFIG_KERNEL_STACK_ORDER ?= 2 STACK_SIZE := $(shell echo $$[ 4096 * (1 << $(CONFIG_KERNEL_STACK_ORDER)) ] ) ifndef START - START = $$(($(TOP_ADDR) - $(SIZE))) + START = $(shell echo $$[ $(TOP_ADDR) - $(SIZE) ] ) endif -CPPFLAGS_vmlinux.lds = $(shell echo -U$(SUBARCH) \ +CPPFLAGS_vmlinux.lds = -U$(SUBARCH) \ -DSTART=$(START) -DELF_ARCH=$(ELF_ARCH) \ - -DELF_FORMAT=\"$(ELF_FORMAT)\" $(CPP_MODE-y) \ - -DKERNEL_STACK_SIZE=$(STACK_SIZE) -DSUBARCH=$(SUBARCH)) + -DELF_FORMAT="$(ELF_FORMAT)" $(CPP_MODE-y) \ + -DKERNEL_STACK_SIZE=$(STACK_SIZE) \ + -DUNMAP_PATH=arch/um/sys-$(SUBARCH)/unmap_fin.o #The wrappers will select whether using "malloc" or the kernel allocator. LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc -CFLAGS_vmlinux = $(LINK-y) $(LINK_WRAPS) +CFLAGS_vmlinux := $(LINK-y) $(LINK_WRAPS) define cmd_vmlinux__ $(CC) $(CFLAGS_vmlinux) -o $@ \ -Wl,-T,$(vmlinux-lds) $(vmlinux-init) \ @@ -140,7 +142,8 @@ endef #When cleaning we don't include .config, so we don't include #TT or skas makefiles and don't clean skas_ptregs.h. CLEAN_FILES += linux x.i gmon.out $(ARCH_DIR)/include/uml-config.h \ - $(GEN_HEADERS) $(ARCH_DIR)/include/skas_ptregs.h + $(GEN_HEADERS) $(ARCH_DIR)/include/skas_ptregs.h \ + $(ARCH_DIR)/include/user_constants.h MRPROPER_FILES += $(SYMLINK_HEADERS) $(ARCH_SYMLINKS) \ $(addprefix $(ARCH_DIR)/kernel/,$(KERN_SYMLINKS)) $(ARCH_DIR)/os \ @@ -242,7 +245,7 @@ $(ARCH_DIR)/util: scripts_basic $(SYS_DIR)/sc.h $(ARCH_DIR)/kernel-offsets.h FOR $(ARCH_DIR)/kernel/skas/util: scripts_basic $(ARCH_DIR)/user-offsets.h FORCE $(Q)$(MAKE) $(build)=$@ -$(ARCH_DIR)/os-$(OS)/util: scripts_basic FORCE +$(ARCH_DIR)/os-$(OS)/util: scripts_basic $(ARCH_DIR)/user-offsets.h FORCE $(Q)$(MAKE) $(build)=$@ export SUBARCH USER_CFLAGS OS diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386 index 29e182d5a83a..a777e57dbf89 100644 --- a/arch/um/Makefile-i386 +++ b/arch/um/Makefile-i386 @@ -1,4 +1,4 @@ -SUBARCH_CORE := arch/um/sys-i386/ arch/i386/crypto/ +core-y += arch/um/sys-i386/ arch/i386/crypto/ TOP_ADDR := $(CONFIG_TOP_ADDR) @@ -8,21 +8,33 @@ ifeq ($(CONFIG_MODE_SKAS),y) endif endif -CFLAGS += -U__$(SUBARCH)__ -U$(SUBARCH) -ARCH_USER_CFLAGS := +LDFLAGS += -m elf_i386 +ELF_ARCH := $(SUBARCH) +ELF_FORMAT := elf32-$(SUBARCH) +OBJCOPYFLAGS := -O binary -R .note -R .comment -S + +ifeq ("$(origin SUBARCH)", "command line") +ifneq ("$(shell uname -m | sed -e s/i.86/i386/)", "$(SUBARCH)") +CFLAGS += $(call cc-option,-m32) +USER_CFLAGS += $(call cc-option,-m32) +HOSTCFLAGS += $(call cc-option,-m32) +HOSTLDFLAGS += $(call cc-option,-m32) +AFLAGS += $(call cc-option,-m32) +LINK-y += $(call cc-option,-m32) +UML_OBJCOPYFLAGS += -F $(ELF_FORMAT) + +export LDFLAGS HOSTCFLAGS HOSTLDFLAGS UML_OBJCOPYFLAGS +endif +endif + +CFLAGS += -U__$(SUBARCH)__ -U$(SUBARCH) $(STUB_CFLAGS) ifneq ($(CONFIG_GPROF),y) ARCH_CFLAGS += -DUM_FASTCALL endif -ELF_ARCH := $(SUBARCH) -ELF_FORMAT := elf32-$(SUBARCH) - -OBJCOPYFLAGS := -O binary -R .note -R .comment -S - SYS_UTIL_DIR := $(ARCH_DIR)/sys-i386/util - -SYS_HEADERS := $(SYS_DIR)/sc.h $(SYS_DIR)/thread.h +SYS_HEADERS := $(SYS_DIR)/sc.h $(SYS_DIR)/thread.h prepare: $(SYS_HEADERS) diff --git a/arch/um/Makefile-x86_64 b/arch/um/Makefile-x86_64 index 32144562c279..aa2f7174ebca 100644 --- a/arch/um/Makefile-x86_64 +++ b/arch/um/Makefile-x86_64 @@ -1,11 +1,13 @@ # Copyright 2003 - 2004 Pathscale, Inc # Released under the GPL -SUBARCH_LIBS := arch/um/sys-x86_64/ +libs-y += arch/um/sys-x86_64/ START := 0x60000000 -CFLAGS += -U__$(SUBARCH)__ -fno-builtin -ARCH_USER_CFLAGS := -D__x86_64__ +#We #undef __x86_64__ for kernelspace, not for userspace where +#it's needed for headers to work! +CFLAGS += -U__$(SUBARCH)__ -fno-builtin $(STUB_CFLAGS) +USER_CFLAGS += -fno-builtin ELF_ARCH := i386:x86-64 ELF_FORMAT := elf64-x86-64 diff --git a/arch/um/defconfig b/arch/um/defconfig index 4067c3aa5b60..80d30d19d750 100644 --- a/arch/um/defconfig +++ b/arch/um/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc3-skas3-v9-pre2 -# Sun Apr 24 19:46:10 2005 +# Linux kernel version: 2.6.12-rc6-mm1 +# Tue Jun 14 18:22:21 2005 # CONFIG_GENERIC_HARDIRQS=y CONFIG_UML=y @@ -13,23 +13,32 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y # # UML-specific options # -CONFIG_MODE_TT=y +# CONFIG_MODE_TT is not set +# CONFIG_STATIC_LINK is not set CONFIG_MODE_SKAS=y CONFIG_UML_X86=y # CONFIG_64BIT is not set CONFIG_TOP_ADDR=0xc0000000 # CONFIG_3_LEVEL_PGTABLES is not set +CONFIG_STUB_CODE=0xbfffe000 +CONFIG_STUB_DATA=0xbffff000 +CONFIG_STUB_START=0xbfffe000 CONFIG_ARCH_HAS_SC_SIGNALS=y CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA=y -CONFIG_LD_SCRIPT_STATIC=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_LD_SCRIPT_DYN=y CONFIG_NET=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m -CONFIG_HOSTFS=y +# CONFIG_HOSTFS is not set CONFIG_MCONSOLE=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_HOST_2G_2G is not set -# CONFIG_SMP is not set CONFIG_NEST_LEVEL=0 CONFIG_KERNEL_HALF_GIGS=1 # CONFIG_HIGHMEM is not set @@ -63,6 +72,8 @@ CONFIG_IKCONFIG_PROC=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -81,6 +92,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -115,6 +127,7 @@ CONFIG_UML_SOUND=m CONFIG_SOUND=m CONFIG_HOSTAUDIO=m CONFIG_UML_RANDOM=y +# CONFIG_MMAPPER is not set # # Block devices @@ -176,6 +189,17 @@ CONFIG_INET=y # CONFIG_INET_TUNNEL is not set CONFIG_IP_TCPDIAG=y # CONFIG_IP_TCPDIAG_IPV6 is not set + +# +# TCP congestion control +# +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_WESTWOOD=y +CONFIG_TCP_CONG_HTCP=y +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set @@ -206,11 +230,15 @@ CONFIG_IP_TCPDIAG=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_KGDBOE is not set # CONFIG_NETPOLL is not set +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -227,6 +255,7 @@ CONFIG_PPP=m # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set CONFIG_SLIP=m # CONFIG_SLIP_COMPRESSED is not set @@ -240,10 +269,12 @@ CONFIG_SLIP=m # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set +# CONFIG_REISER4_FS is not set CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -256,6 +287,7 @@ CONFIG_REISERFS_FS=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y CONFIG_QUOTA=y # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set @@ -265,6 +297,12 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set +# CONFIG_FUSE_FS is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -291,6 +329,8 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -319,6 +359,7 @@ CONFIG_RAMFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -404,14 +445,15 @@ CONFIG_CRC32=m # CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y -CONFIG_PT_PROXY=y +# CONFIG_GPROF is not set # CONFIG_GCOV is not set # CONFIG_SYSCALL_DEBUG is not set diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile index b2de9916c32c..de17d4c6e02d 100644 --- a/arch/um/drivers/Makefile +++ b/arch/um/drivers/Makefile @@ -10,7 +10,6 @@ slip-objs := slip_kern.o slip_user.o slirp-objs := slirp_kern.o slirp_user.o daemon-objs := daemon_kern.o daemon_user.o mcast-objs := mcast_kern.o mcast_user.o -#pcap-objs := pcap_kern.o pcap_user.o $(PCAP) net-objs := net_kern.o net_user.o mconsole-objs := mconsole_kern.o mconsole_user.o hostaudio-objs := hostaudio_kern.o @@ -18,6 +17,19 @@ ubd-objs := ubd_kern.o ubd_user.o port-objs := port_kern.o port_user.o harddog-objs := harddog_kern.o harddog_user.o +LDFLAGS_pcap.o := -r $(shell $(CC) $(CFLAGS) -print-file-name=libpcap.a) + +targets := pcap_kern.o pcap_user.o + +$(obj)/pcap.o: $(obj)/pcap_kern.o $(obj)/pcap_user.o + $(LD) -r -dp -o $@ $^ $(LDFLAGS) $(LDFLAGS_pcap.o) +#XXX: The call below does not work because the flags are added before the +# object name, so nothing from the library gets linked. +#$(call if_changed,ld) + +# When the above is fixed, don't forget to add this too! +#targets += $(obj)/pcap.o + obj-y := stdio_console.o fd.o chan_kern.o chan_user.o line.o obj-$(CONFIG_SSL) += ssl.o obj-$(CONFIG_STDERR_CONSOLE) += stderr_console.o @@ -26,7 +38,7 @@ obj-$(CONFIG_UML_NET_SLIP) += slip.o slip_common.o obj-$(CONFIG_UML_NET_SLIRP) += slirp.o slip_common.o obj-$(CONFIG_UML_NET_DAEMON) += daemon.o obj-$(CONFIG_UML_NET_MCAST) += mcast.o -#obj-$(CONFIG_UML_NET_PCAP) += pcap.o $(PCAP) +obj-$(CONFIG_UML_NET_PCAP) += pcap.o obj-$(CONFIG_UML_NET) += net.o obj-$(CONFIG_MCONSOLE) += mconsole.o obj-$(CONFIG_MMAPPER) += mmapper_kern.o @@ -41,6 +53,7 @@ obj-$(CONFIG_UML_WATCHDOG) += harddog.o obj-$(CONFIG_BLK_DEV_COW_COMMON) += cow_user.o obj-$(CONFIG_UML_RANDOM) += random.o -USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o +# pcap_user.o must be added explicitly. +USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o pcap_user.o include arch/um/scripts/Makefile.rules diff --git a/arch/um/drivers/cow.h b/arch/um/drivers/cow.h index 4fcbe8b1b77e..4fcf3a8d13f4 100644 --- a/arch/um/drivers/cow.h +++ b/arch/um/drivers/cow.h @@ -3,10 +3,10 @@ #include <asm/types.h> -#if __BYTE_ORDER == __BIG_ENDIAN +#if defined(__BIG_ENDIAN) # define ntohll(x) (x) # define htonll(x) (x) -#elif __BYTE_ORDER == __LITTLE_ENDIAN +#elif defined(__LITTLE_ENDIAN) # define ntohll(x) bswap_64(x) # define htonll(x) bswap_64(x) #else diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c index cf15b4a8b517..c1b03f7c1daa 100644 --- a/arch/um/drivers/daemon_user.c +++ b/arch/um/drivers/daemon_user.c @@ -157,9 +157,9 @@ static void daemon_remove(void *data) os_close_file(pri->fd); os_close_file(pri->control); - if(pri->data_addr != NULL) kfree(pri->data_addr); - if(pri->ctl_addr != NULL) kfree(pri->ctl_addr); - if(pri->local_addr != NULL) kfree(pri->local_addr); + kfree(pri->data_addr); + kfree(pri->ctl_addr); + kfree(pri->local_addr); } int daemon_user_write(int fd, void *buf, int len, struct daemon_data *pri) diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c index d5742783e19d..59602b81b240 100644 --- a/arch/um/drivers/hostaudio_kern.c +++ b/arch/um/drivers/hostaudio_kern.c @@ -57,10 +57,10 @@ __uml_setup("mixer=", set_mixer, "mixer=<mixer device>\n" MIXER_HELP); #else /*MODULE*/ -MODULE_PARM(dsp, "s"); +module_param(dsp, charp, 0644); MODULE_PARM_DESC(dsp, DSP_HELP); -MODULE_PARM(mixer, "s"); +module_param(mixer, charp, 0644); MODULE_PARM_DESC(mixer, MIXER_HELP); #endif diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index 0f59736db329..e0fdffa2d542 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -602,11 +602,26 @@ int line_get_config(char *name, struct line *lines, unsigned int num, char *str, return n; } -int line_remove(struct line *lines, unsigned int num, char *str) +int line_id(char **str, int *start_out, int *end_out) +{ + char *end; + int n; + + n = simple_strtoul(*str, &end, 0); + if((*end != '\0') || (end == *str)) + return -1; + + *str = end; + *start_out = n; + *end_out = n; + return n; +} + +int line_remove(struct line *lines, unsigned int num, int n) { char config[sizeof("conxxxx=none\0")]; - sprintf(config, "%s=none", str); + sprintf(config, "%d=none", n); return !line_setup(lines, num, config, 0); } @@ -648,11 +663,15 @@ struct tty_driver *line_register_devfs(struct lines *set, return driver; } +static spinlock_t winch_handler_lock; +LIST_HEAD(winch_handlers); + void lines_init(struct line *lines, int nlines) { struct line *line; int i; + spin_lock_init(&winch_handler_lock); for(i = 0; i < nlines; i++){ line = &lines[i]; INIT_LIST_HEAD(&line->chan_list); @@ -709,31 +728,30 @@ irqreturn_t winch_interrupt(int irq, void *data, struct pt_regs *unused) return IRQ_HANDLED; } -DECLARE_MUTEX(winch_handler_sem); -LIST_HEAD(winch_handlers); - void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty) { struct winch *winch; - down(&winch_handler_sem); winch = kmalloc(sizeof(*winch), GFP_KERNEL); if (winch == NULL) { printk("register_winch_irq - kmalloc failed\n"); - goto out; + return; } + *winch = ((struct winch) { .list = LIST_HEAD_INIT(winch->list), .fd = fd, .tty_fd = tty_fd, .pid = pid, .tty = tty }); + + spin_lock(&winch_handler_lock); list_add(&winch->list, &winch_handlers); + spin_unlock(&winch_handler_lock); + if(um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt, SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM, "winch", winch) < 0) printk("register_winch_irq - failed to register IRQ\n"); - out: - up(&winch_handler_sem); } static void unregister_winch(struct tty_struct *tty) @@ -741,7 +759,7 @@ static void unregister_winch(struct tty_struct *tty) struct list_head *ele; struct winch *winch, *found = NULL; - down(&winch_handler_sem); + spin_lock(&winch_handler_lock); list_for_each(ele, &winch_handlers){ winch = list_entry(ele, struct winch, list); if(winch->tty == tty){ @@ -749,20 +767,25 @@ static void unregister_winch(struct tty_struct *tty) break; } } - if(found == NULL) - goto out; + goto err; + + list_del(&winch->list); + spin_unlock(&winch_handler_lock); if(winch->pid != -1) os_kill_process(winch->pid, 1); free_irq(WINCH_IRQ, winch); - list_del(&winch->list); kfree(winch); - out: - up(&winch_handler_sem); + + return; +err: + spin_unlock(&winch_handler_lock); } +/* XXX: No lock as it's an exitcall... is this valid? Depending on cleanup + * order... are we sure that nothing else is done on the list? */ static void winch_cleanup(void) { struct list_head *ele; @@ -771,6 +794,9 @@ static void winch_cleanup(void) list_for_each(ele, &winch_handlers){ winch = list_entry(ele, struct winch, list); if(winch->fd != -1){ + /* Why is this different from the above free_irq(), + * which deactivates SIGIO? This searches the FD + * somewhere else and removes it from the list... */ deactivate_fd(winch->fd, WINCH_IRQ); os_close_file(winch->fd); } diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index d7c7adcc0a67..c190c2414197 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -419,8 +419,9 @@ void mconsole_config(struct mc_request *req) void mconsole_remove(struct mc_request *req) { struct mc_device *dev; - char *ptr = req->request.data; - int err; + char *ptr = req->request.data, *err_msg = ""; + char error[256]; + int err, start, end, n; ptr += strlen("remove"); while(isspace(*ptr)) ptr++; @@ -429,8 +430,35 @@ void mconsole_remove(struct mc_request *req) mconsole_reply(req, "Bad remove option", 1, 0); return; } - err = (*dev->remove)(&ptr[strlen(dev->name)]); - mconsole_reply(req, "", err, 0); + + ptr = &ptr[strlen(dev->name)]; + + err = 1; + n = (*dev->id)(&ptr, &start, &end); + if(n < 0){ + err_msg = "Couldn't parse device number"; + goto out; + } + else if((n < start) || (n > end)){ + sprintf(error, "Invalid device number - must be between " + "%d and %d", start, end); + err_msg = error; + goto out; + } + + err = (*dev->remove)(n); + switch(err){ + case -ENODEV: + err_msg = "Device doesn't exist"; + break; + case -EBUSY: + err_msg = "Device is currently open"; + break; + default: + break; + } + out: + mconsole_reply(req, err_msg, err, 0); } #ifdef CONFIG_MAGIC_SYSRQ @@ -529,7 +557,7 @@ static int create_proc_mconsole(void) ent = create_proc_entry("mconsole", S_IFREG | 0200, NULL); if(ent == NULL){ - printk("create_proc_mconsole : create_proc_entry failed\n"); + printk(KERN_INFO "create_proc_mconsole : create_proc_entry failed\n"); return(0); } diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 5388a7428691..1495007bf6c0 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -612,25 +612,35 @@ static int net_config(char *str) return(err); } -static int net_remove(char *str) +static int net_id(char **str, int *start_out, int *end_out) +{ + char *end; + int n; + + n = simple_strtoul(*str, &end, 0); + if((*end != '\0') || (end == *str)) + return -1; + + *start_out = n; + *end_out = n; + *str = end; + return n; +} + +static int net_remove(int n) { struct uml_net *device; struct net_device *dev; struct uml_net_private *lp; - char *end; - int n; - - n = simple_strtoul(str, &end, 0); - if((*end != '\0') || (end == str)) - return(-1); device = find_device(n); if(device == NULL) - return(0); + return -ENODEV; dev = device->dev; lp = dev->priv; - if(lp->fd > 0) return(-1); + if(lp->fd > 0) + return -EBUSY; if(lp->remove != NULL) (*lp->remove)(&lp->user); unregister_netdev(dev); platform_device_unregister(&device->pdev); @@ -638,13 +648,14 @@ static int net_remove(char *str) list_del(&device->list); kfree(device); free_netdev(dev); - return(0); + return 0; } static struct mc_device net_mc = { .name = "eth", .config = net_config, .get_config = NULL, + .id = net_id, .remove = net_remove, }; diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c index b32a77010fbe..62e04ecfada8 100644 --- a/arch/um/drivers/ssl.c +++ b/arch/um/drivers/ssl.c @@ -49,7 +49,7 @@ static struct chan_opts opts = { static int ssl_config(char *str); static int ssl_get_config(char *dev, char *str, int size, char **error_out); -static int ssl_remove(char *str); +static int ssl_remove(int n); static struct line_driver driver = { .name = "UML serial line", @@ -69,6 +69,7 @@ static struct line_driver driver = { .name = "ssl", .config = ssl_config, .get_config = ssl_get_config, + .id = line_id, .remove = ssl_remove, }, }; @@ -94,10 +95,10 @@ static int ssl_get_config(char *dev, char *str, int size, char **error_out) str, size, error_out)); } -static int ssl_remove(char *str) +static int ssl_remove(int n) { - return(line_remove(serial_lines, - sizeof(serial_lines)/sizeof(serial_lines[0]), str)); + return line_remove(serial_lines, + sizeof(serial_lines)/sizeof(serial_lines[0]), n); } int ssl_open(struct tty_struct *tty, struct file *filp) diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index afbe1e71ed83..005aa6333b6e 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -55,7 +55,7 @@ static struct chan_opts opts = { static int con_config(char *str); static int con_get_config(char *dev, char *str, int size, char **error_out); -static int con_remove(char *str); +static int con_remove(int n); static struct line_driver driver = { .name = "UML console", @@ -75,6 +75,7 @@ static struct line_driver driver = { .name = "con", .config = con_config, .get_config = con_get_config, + .id = line_id, .remove = con_remove, }, }; @@ -99,9 +100,9 @@ static int con_get_config(char *dev, char *str, int size, char **error_out) size, error_out)); } -static int con_remove(char *str) +static int con_remove(int n) { - return(line_remove(vts, sizeof(vts)/sizeof(vts[0]), str)); + return line_remove(vts, sizeof(vts)/sizeof(vts[0]), n); } static int con_open(struct tty_struct *tty, struct file *filp) diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 2a7f6892c55c..344b24d09a7c 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -754,24 +754,34 @@ static int ubd_get_config(char *name, char *str, int size, char **error_out) return(len); } -static int ubd_remove(char *str) +static int ubd_id(char **str, int *start_out, int *end_out) +{ + int n; + + n = parse_unit(str); + *start_out = 0; + *end_out = MAX_DEV - 1; + return n; +} + +static int ubd_remove(int n) { struct ubd *dev; - int n, err = -ENODEV; + int err = -ENODEV; - n = parse_unit(&str); + spin_lock(&ubd_lock); - if((n < 0) || (n >= MAX_DEV)) - return(err); + if(ubd_gendisk[n] == NULL) + goto out; dev = &ubd_dev[n]; - if(dev->count > 0) - return(-EBUSY); /* you cannot remove a open disk */ - err = 0; - spin_lock(&ubd_lock); + if(dev->file == NULL) + goto out; - if(ubd_gendisk[n] == NULL) + /* you cannot remove a open disk */ + err = -EBUSY; + if(dev->count > 0) goto out; del_gendisk(ubd_gendisk[n]); @@ -787,15 +797,16 @@ static int ubd_remove(char *str) platform_device_unregister(&dev->pdev); *dev = ((struct ubd) DEFAULT_UBD); err = 0; - out: - spin_unlock(&ubd_lock); - return(err); +out: + spin_unlock(&ubd_lock); + return err; } static struct mc_device ubd_mc = { .name = "ubd", .config = ubd_config, .get_config = ubd_get_config, + .id = ubd_id, .remove = ubd_remove, }; diff --git a/arch/um/include/line.h b/arch/um/include/line.h index 4c5e92c04ccb..5323d22a6ca7 100644 --- a/arch/um/include/line.h +++ b/arch/um/include/line.h @@ -101,7 +101,8 @@ extern void lines_init(struct line *lines, int nlines); extern void close_lines(struct line *lines, int nlines); extern int line_config(struct line *lines, unsigned int sizeof_lines, char *str); -extern int line_remove(struct line *lines, unsigned int sizeof_lines, char *str); +extern int line_id(char **str, int *start_out, int *end_out); +extern int line_remove(struct line *lines, unsigned int sizeof_lines, int n); extern int line_get_config(char *dev, struct line *lines, unsigned int sizeof_lines, char *str, int size, char **error_out); diff --git a/arch/um/include/mconsole_kern.h b/arch/um/include/mconsole_kern.h index 61c274fcee5d..d86ee14260ce 100644 --- a/arch/um/include/mconsole_kern.h +++ b/arch/um/include/mconsole_kern.h @@ -20,7 +20,8 @@ struct mc_device { char *name; int (*config)(char *); int (*get_config)(char *, char *, int, char **); - int (*remove)(char *); + int (*id)(char **, int *, int *); + int (*remove)(int); }; #define CONFIG_CHUNK(str, size, current, chunk, end) \ diff --git a/arch/um/include/mem.h b/arch/um/include/mem.h index 10c46c38949a..99d3ad4a03e5 100644 --- a/arch/um/include/mem.h +++ b/arch/um/include/mem.h @@ -13,6 +13,7 @@ extern int physmem_subst_mapping(void *virt, int fd, __u64 offset, int w); extern int is_remapped(void *virt); extern int physmem_remove_mapping(void *virt); extern void physmem_forget_descriptor(int fd); +extern unsigned long to_phys(void *virt); #endif diff --git a/arch/um/include/registers.h b/arch/um/include/registers.h index 8744abb5224f..0a35e6d0baa0 100644 --- a/arch/um/include/registers.h +++ b/arch/um/include/registers.h @@ -14,6 +14,7 @@ extern int restore_fp_registers(int pid, unsigned long *fp_regs); extern void save_registers(int pid, union uml_pt_regs *regs); extern void restore_registers(int pid, union uml_pt_regs *regs); extern void init_registers(int pid); +extern void get_safe_registers(unsigned long * regs); #endif diff --git a/arch/um/include/sysdep-i386/ptrace_user.h b/arch/um/include/sysdep-i386/ptrace_user.h index eca8066e7a43..899aa4b2a78d 100644 --- a/arch/um/include/sysdep-i386/ptrace_user.h +++ b/arch/um/include/sysdep-i386/ptrace_user.h @@ -20,11 +20,24 @@ #define PT_SYSCALL_ARG3_OFFSET PT_OFFSET(EDX) #define PT_SYSCALL_ARG4_OFFSET PT_OFFSET(ESI) #define PT_SYSCALL_ARG5_OFFSET PT_OFFSET(EDI) +#define PT_SYSCALL_ARG6_OFFSET PT_OFFSET(EBP) #define PT_SYSCALL_RET_OFFSET PT_OFFSET(EAX) +#define REGS_SYSCALL_NR EAX /* This is used before a system call */ +#define REGS_SYSCALL_ARG1 EBX +#define REGS_SYSCALL_ARG2 ECX +#define REGS_SYSCALL_ARG3 EDX +#define REGS_SYSCALL_ARG4 ESI +#define REGS_SYSCALL_ARG5 EDI +#define REGS_SYSCALL_ARG6 EBP + +#define REGS_IP_INDEX EIP +#define REGS_SP_INDEX UESP + #define PT_IP_OFFSET PT_OFFSET(EIP) #define PT_IP(regs) ((regs)[EIP]) +#define PT_SP_OFFSET PT_OFFSET(UESP) #define PT_SP(regs) ((regs)[UESP]) #ifndef FRAME_SIZE diff --git a/arch/um/include/sysdep-i386/stub.h b/arch/um/include/sysdep-i386/stub.h new file mode 100644 index 000000000000..d3699fe1c613 --- /dev/null +++ b/arch/um/include/sysdep-i386/stub.h @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com) + * Licensed under the GPL + */ + +#ifndef __SYSDEP_STUB_H +#define __SYSDEP_STUB_H + +#include <asm/ptrace.h> +#include <asm/unistd.h> + +extern void stub_segv_handler(int sig); +extern void stub_clone_handler(void); + +#define STUB_SYSCALL_RET EAX +#define STUB_MMAP_NR __NR_mmap2 +#define MMAP_OFFSET(o) ((o) >> PAGE_SHIFT) + +static inline long stub_syscall2(long syscall, long arg1, long arg2) +{ + long ret; + + __asm__("movl %0, %%ecx; " : : "g" (arg2) : "%ecx"); + __asm__("movl %0, %%ebx; " : : "g" (arg1) : "%ebx"); + __asm__("movl %0, %%eax; " : : "g" (syscall) : "%eax"); + __asm__("int $0x80;" : : : "%eax"); + __asm__ __volatile__("movl %%eax, %0; " : "=g" (ret) :); + return(ret); +} + +static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3) +{ + __asm__("movl %0, %%edx; " : : "g" (arg3) : "%edx"); + return(stub_syscall2(syscall, arg1, arg2)); +} + +static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3, + long arg4) +{ + __asm__("movl %0, %%esi; " : : "g" (arg4) : "%esi"); + return(stub_syscall3(syscall, arg1, arg2, arg3)); +} + +static inline long stub_syscall6(long syscall, long arg1, long arg2, long arg3, + long arg4, long arg5, long arg6) +{ + long ret; + __asm__("movl %0, %%eax; " : : "g" (syscall) : "%eax"); + __asm__("movl %0, %%ebx; " : : "g" (arg1) : "%ebx"); + __asm__("movl %0, %%ecx; " : : "g" (arg2) : "%ecx"); + __asm__("movl %0, %%edx; " : : "g" (arg3) : "%edx"); + __asm__("movl %0, %%esi; " : : "g" (arg4) : "%esi"); + __asm__("movl %0, %%edi; " : : "g" (arg5) : "%edi"); + __asm__ __volatile__("pushl %%ebp ; movl %1, %%ebp; " + "int $0x80; popl %%ebp ; " + "movl %%eax, %0; " : "=g" (ret) : "g" (arg6) : "%eax"); + return(ret); +} + +static inline void trap_myself(void) +{ + __asm("int3"); +} + +#endif diff --git a/arch/um/include/sysdep-x86_64/ptrace_user.h b/arch/um/include/sysdep-x86_64/ptrace_user.h index 31729973fb14..128faf027364 100644 --- a/arch/um/include/sysdep-x86_64/ptrace_user.h +++ b/arch/um/include/sysdep-x86_64/ptrace_user.h @@ -55,6 +55,20 @@ #define PTRACE_OLDSETOPTIONS 21 #endif +/* These are before the system call, so the the system call number is RAX + * rather than ORIG_RAX, and arg4 is R10 rather than RCX + */ +#define REGS_SYSCALL_NR PT_INDEX(RAX) +#define REGS_SYSCALL_ARG1 PT_INDEX(RDI) +#define REGS_SYSCALL_ARG2 PT_INDEX(RSI) +#define REGS_SYSCALL_ARG3 PT_INDEX(RDX) +#define REGS_SYSCALL_ARG4 PT_INDEX(R10) +#define REGS_SYSCALL_ARG5 PT_INDEX(R8) +#define REGS_SYSCALL_ARG6 PT_INDEX(R9) + +#define REGS_IP_INDEX PT_INDEX(RIP) +#define REGS_SP_INDEX PT_INDEX(RSP) + #endif /* diff --git a/arch/um/include/sysdep-x86_64/stub.h b/arch/um/include/sysdep-x86_64/stub.h new file mode 100644 index 000000000000..f599058d8263 --- /dev/null +++ b/arch/um/include/sysdep-x86_64/stub.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com) + * Licensed under the GPL + */ + +#ifndef __SYSDEP_STUB_H +#define __SYSDEP_STUB_H + +#include <asm/ptrace.h> +#include <asm/unistd.h> +#include <sysdep/ptrace_user.h> + +extern void stub_segv_handler(int sig); +extern void stub_clone_handler(void); + +#define STUB_SYSCALL_RET PT_INDEX(RAX) +#define STUB_MMAP_NR __NR_mmap +#define MMAP_OFFSET(o) (o) + +static inline long stub_syscall2(long syscall, long arg1, long arg2) +{ + long ret; + + __asm__("movq %0, %%rsi; " : : "g" (arg2) : "%rsi"); + __asm__("movq %0, %%rdi; " : : "g" (arg1) : "%rdi"); + __asm__("movq %0, %%rax; " : : "g" (syscall) : "%rax"); + __asm__("syscall;" : : : "%rax", "%r11", "%rcx"); + __asm__ __volatile__("movq %%rax, %0; " : "=g" (ret) :); + return(ret); +} + +static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3) +{ + __asm__("movq %0, %%rdx; " : : "g" (arg3) : "%rdx"); + return(stub_syscall2(syscall, arg1, arg2)); +} + +static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3, + long arg4) +{ + __asm__("movq %0, %%r10; " : : "g" (arg4) : "%r10"); + return(stub_syscall3(syscall, arg1, arg2, arg3)); +} + +static inline long stub_syscall6(long syscall, long arg1, long arg2, long arg3, + long arg4, long arg5, long arg6) +{ + __asm__("movq %0, %%r9; " : : "g" (arg6) : "%r9"); + __asm__("movq %0, %%r8; " : : "g" (arg5) : "%r8"); + return(stub_syscall4(syscall, arg1, arg2, arg3, arg4)); +} + +static inline void trap_myself(void) +{ + __asm("int3"); +} + +#endif diff --git a/arch/um/include/time_user.h b/arch/um/include/time_user.h index 6793a2fcd0ae..17d7ef2141f4 100644 --- a/arch/um/include/time_user.h +++ b/arch/um/include/time_user.h @@ -8,11 +8,12 @@ extern void timer(void); extern void switch_timers(int to_real); -extern void set_interval(int timer_type); extern void idle_sleep(int secs); extern void enable_timer(void); +extern void prepare_timer(void * ptr); extern void disable_timer(void); extern unsigned long time_lock(void); extern void time_unlock(unsigned long); +extern void user_time_init(void); #endif diff --git a/arch/um/include/tlb.h b/arch/um/include/tlb.h index da1097285b8c..c6f9628f39bf 100644 --- a/arch/um/include/tlb.h +++ b/arch/um/include/tlb.h @@ -37,31 +37,25 @@ struct host_vm_op { extern void mprotect_kernel_vm(int w); extern void force_flush_all(void); extern void fix_range_common(struct mm_struct *mm, unsigned long start_addr, - unsigned long end_addr, int force, int data, - void (*do_ops)(int, struct host_vm_op *, int)); + unsigned long end_addr, int force, + void (*do_ops)(union mm_context *, + struct host_vm_op *, int)); extern int flush_tlb_kernel_range_common(unsigned long start, unsigned long end); extern int add_mmap(unsigned long virt, unsigned long phys, unsigned long len, int r, int w, int x, struct host_vm_op *ops, int index, - int last_filled, int data, - void (*do_ops)(int, struct host_vm_op *, int)); + int last_filled, union mm_context *mmu, + void (*do_ops)(union mm_context *, struct host_vm_op *, + int)); extern int add_munmap(unsigned long addr, unsigned long len, struct host_vm_op *ops, int index, int last_filled, - int data, void (*do_ops)(int, struct host_vm_op *, int)); + union mm_context *mmu, + void (*do_ops)(union mm_context *, struct host_vm_op *, + int)); extern int add_mprotect(unsigned long addr, unsigned long len, int r, int w, int x, struct host_vm_op *ops, int index, - int last_filled, int data, - void (*do_ops)(int, struct host_vm_op *, int)); + int last_filled, union mm_context *mmu, + void (*do_ops)(union mm_context *, struct host_vm_op *, + int)); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S index 715b0838a68c..3942a5f245de 100644 --- a/arch/um/kernel/dyn.lds.S +++ b/arch/um/kernel/dyn.lds.S @@ -67,6 +67,12 @@ SECTIONS *(.stub .text.* .gnu.linkonce.t.*) /* .gnu.warning sections are handled specially by elf32.em. */ *(.gnu.warning) + + . = ALIGN(4096); + __syscall_stub_start = .; + *(.__syscall_stub*) + __syscall_stub_end = .; + . = ALIGN(4096); } =0x90909090 .fini : { KEEP (*(.fini)) diff --git a/arch/um/kernel/exitcode.c b/arch/um/kernel/exitcode.c index 0ea87f24b36f..d21ebad666b4 100644 --- a/arch/um/kernel/exitcode.c +++ b/arch/um/kernel/exitcode.c @@ -48,7 +48,7 @@ static int make_proc_exitcode(void) ent = create_proc_entry("exitcode", 0600, &proc_root); if(ent == NULL){ - printk("make_proc_exitcode : Failed to register " + printk(KERN_WARNING "make_proc_exitcode : Failed to register " "/proc/exitcode\n"); return(0); } diff --git a/arch/um/kernel/helper.c b/arch/um/kernel/helper.c index 13b1f5c2f7ee..f83e1e8e2392 100644 --- a/arch/um/kernel/helper.c +++ b/arch/um/kernel/helper.c @@ -13,6 +13,7 @@ #include "user.h" #include "kern_util.h" #include "user_util.h" +#include "helper.h" #include "os.h" struct helper_data { @@ -149,7 +150,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, return(pid); } -int helper_wait(int pid, int block) +int helper_wait(int pid) { int ret; @@ -160,14 +161,3 @@ int helper_wait(int pid, int block) } return(ret); } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c index e59f58152678..1e1a87f1c510 100644 --- a/arch/um/kernel/main.c +++ b/arch/um/kernel/main.c @@ -69,7 +69,6 @@ static __init void do_uml_initcalls(void) static void last_ditch_exit(int sig) { - kmalloc_ok = 0; signal(SIGINT, SIG_DFL); signal(SIGTERM, SIG_DFL); signal(SIGHUP, SIG_DFL); diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c index 420e6d51fa0f..a24e3b7f4bf0 100644 --- a/arch/um/kernel/physmem.c +++ b/arch/um/kernel/physmem.c @@ -353,6 +353,8 @@ void map_memory(unsigned long virt, unsigned long phys, unsigned long len, #define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) +extern int __syscall_stub_start, __binary_start; + void setup_physmem(unsigned long start, unsigned long reserve_end, unsigned long len, unsigned long highmem) { @@ -371,6 +373,12 @@ void setup_physmem(unsigned long start, unsigned long reserve_end, exit(1); } + /* Special kludge - This page will be mapped in to userspace processes + * from physmem_fd, so it needs to be written out there. + */ + os_seek_file(physmem_fd, __pa(&__syscall_stub_start)); + os_write_file(physmem_fd, &__syscall_stub_start, PAGE_SIZE); + bootmap_size = init_bootmem(pfn, pfn + delta); free_bootmem(__pa(reserve_end) + bootmap_size, len - bootmap_size - reserve); diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index 1b5ef3e96c71..67acd92c5322 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -32,6 +32,7 @@ #include "uml-config.h" #include "choose-mode.h" #include "mode.h" +#include "tempfile.h" #ifdef UML_CONFIG_MODE_SKAS #include "skas.h" #include "skas_ptrace.h" @@ -130,7 +131,7 @@ int start_fork_tramp(void *thread_arg, unsigned long temp_stack, return(arg.pid); } -static int ptrace_child(void) +static int ptrace_child(void *arg) { int ret; int pid = os_getpid(), ppid = getppid(); @@ -159,16 +160,20 @@ static int ptrace_child(void) _exit(ret); } -static int start_ptraced_child(void) +static int start_ptraced_child(void **stack_out) { + void *stack; + unsigned long sp; int pid, n, status; - pid = fork(); - if(pid == 0) - ptrace_child(); - + stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC, + MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); + if(stack == MAP_FAILED) + panic("check_ptrace : mmap failed, errno = %d", errno); + sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *); + pid = clone(ptrace_child, (void *) sp, SIGCHLD, NULL); if(pid < 0) - panic("check_ptrace : fork failed, errno = %d", errno); + panic("check_ptrace : clone failed, errno = %d", errno); CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); if(n < 0) panic("check_ptrace : wait failed, errno = %d", errno); @@ -176,6 +181,7 @@ static int start_ptraced_child(void) panic("check_ptrace : expected SIGSTOP, got status = %d", status); + *stack_out = stack; return(pid); } @@ -183,12 +189,12 @@ static int start_ptraced_child(void) * just avoid using sysemu, not panic, but only if SYSEMU features are broken. * So only for SYSEMU features we test mustpanic, while normal host features * must work anyway!*/ -static int stop_ptraced_child(int pid, int exitcode, int mustexit) +static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic) { int status, n, ret = 0; if(ptrace(PTRACE_CONT, pid, 0, 0) < 0) - panic("stop_ptraced_child : ptrace failed, errno = %d", errno); + panic("check_ptrace : ptrace failed, errno = %d", errno); CATCH_EINTR(n = waitpid(pid, &status, 0)); if(!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) { int exit_with = WEXITSTATUS(status); @@ -199,24 +205,40 @@ static int stop_ptraced_child(int pid, int exitcode, int mustexit) printk("check_ptrace : child exited with exitcode %d, while " "expecting %d; status 0x%x", exit_with, exitcode, status); - if (mustexit) + if (mustpanic) panic("\n"); else printk("\n"); ret = -1; } + if(munmap(stack, PAGE_SIZE) < 0) + panic("check_ptrace : munmap failed, errno = %d", errno); return ret; } static int force_sysemu_disabled = 0; +int ptrace_faultinfo = 1; +int proc_mm = 1; + +static int __init skas0_cmd_param(char *str, int* add) +{ + ptrace_faultinfo = proc_mm = 0; + return 0; +} + static int __init nosysemu_cmd_param(char *str, int* add) { force_sysemu_disabled = 1; return 0; } +__uml_setup("skas0", skas0_cmd_param, + "skas0\n" + " Disables SKAS3 usage, so that SKAS0 is used, unless you \n" + " specify mode=tt.\n\n"); + __uml_setup("nosysemu", nosysemu_cmd_param, "nosysemu\n" " Turns off syscall emulation patch for ptrace (SYSEMU) on.\n" @@ -227,11 +249,12 @@ __uml_setup("nosysemu", nosysemu_cmd_param, static void __init check_sysemu(void) { + void *stack; int pid, syscall, n, status, count=0; printk("Checking syscall emulation patch for ptrace..."); sysemu_supported = 0; - pid = start_ptraced_child(); + pid = start_ptraced_child(&stack); if(ptrace(PTRACE_SYSEMU, pid, 0, 0) < 0) goto fail; @@ -249,7 +272,7 @@ static void __init check_sysemu(void) panic("check_sysemu : failed to modify system " "call return, errno = %d", errno); - if (stop_ptraced_child(pid, 0, 0) < 0) + if (stop_ptraced_child(pid, stack, 0, 0) < 0) goto fail_stopped; sysemu_supported = 1; @@ -257,7 +280,7 @@ static void __init check_sysemu(void) set_using_sysemu(!force_sysemu_disabled); printk("Checking advanced syscall emulation patch for ptrace..."); - pid = start_ptraced_child(); + pid = start_ptraced_child(&stack); while(1){ count++; if(ptrace(PTRACE_SYSEMU_SINGLESTEP, pid, 0, 0) < 0) @@ -282,7 +305,7 @@ static void __init check_sysemu(void) break; } } - if (stop_ptraced_child(pid, 0, 0) < 0) + if (stop_ptraced_child(pid, stack, 0, 0) < 0) goto fail_stopped; sysemu_supported = 2; @@ -293,17 +316,18 @@ static void __init check_sysemu(void) return; fail: - stop_ptraced_child(pid, 1, 0); + stop_ptraced_child(pid, stack, 1, 0); fail_stopped: printk("missing\n"); } void __init check_ptrace(void) { + void *stack; int pid, syscall, n, status; printk("Checking that ptrace can change system call numbers..."); - pid = start_ptraced_child(); + pid = start_ptraced_child(&stack); if (ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0) panic("check_ptrace: PTRACE_SETOPTIONS failed, errno = %d", errno); @@ -330,7 +354,7 @@ void __init check_ptrace(void) break; } } - stop_ptraced_child(pid, 0, 1); + stop_ptraced_child(pid, stack, 0, 1); printk("OK\n"); check_sysemu(); } @@ -358,49 +382,54 @@ void forward_pending_sigio(int target) kill(target, SIGIO); } +extern void *__syscall_stub_start, __syscall_stub_end; + #ifdef UML_CONFIG_MODE_SKAS -static inline int check_skas3_ptrace_support(void) + +static inline void check_skas3_ptrace_support(void) { struct ptrace_faultinfo fi; - int pid, n, ret = 1; + void *stack; + int pid, n; printf("Checking for the skas3 patch in the host..."); - pid = start_ptraced_child(); + pid = start_ptraced_child(&stack); n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi); if (n < 0) { + ptrace_faultinfo = 0; if(errno == EIO) printf("not found\n"); else { perror("not found"); } - ret = 0; - } else { - printf("found\n"); + } + else { + if (!ptrace_faultinfo) + printf("found but disabled on command line\n"); + else + printf("found\n"); } init_registers(pid); - stop_ptraced_child(pid, 1, 1); - - return(ret); + stop_ptraced_child(pid, stack, 1, 1); } int can_do_skas(void) { - int ret = 1; - printf("Checking for /proc/mm..."); if (os_access("/proc/mm", OS_ACC_W_OK) < 0) { + proc_mm = 0; printf("not found\n"); - ret = 0; - goto out; } else { - printf("found\n"); + if (!proc_mm) + printf("found but disabled on command line\n"); + else + printf("found\n"); } - ret = check_skas3_ptrace_support(); -out: - return ret; + check_skas3_ptrace_support(); + return 1; } #else int can_do_skas(void) diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c index 804c6bbdf67c..c23d8a08d0ff 100644 --- a/arch/um/kernel/process_kern.c +++ b/arch/um/kernel/process_kern.c @@ -8,6 +8,7 @@ #include "linux/kernel.h" #include "linux/sched.h" #include "linux/interrupt.h" +#include "linux/string.h" #include "linux/mm.h" #include "linux/slab.h" #include "linux/utsname.h" @@ -95,8 +96,8 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) current->thread.request.u.thread.proc = fn; current->thread.request.u.thread.arg = arg; - pid = do_fork(CLONE_VM | CLONE_UNTRACED | flags, 0, NULL, 0, NULL, - NULL); + pid = do_fork(CLONE_VM | CLONE_UNTRACED | flags, 0, + ¤t->thread.regs, 0, NULL, NULL); if(pid < 0) panic("do_fork failed in kernel_thread, errno = %d", pid); return(pid); @@ -168,7 +169,7 @@ int current_pid(void) void default_idle(void) { - uml_idle_timer(); + CHOOSE_MODE(uml_idle_timer(), (void) 0); atomic_inc(&init_mm.mm_count); current->mm = &init_mm; @@ -322,12 +323,7 @@ void do_uml_exitcalls(void) char *uml_strdup(char *string) { - char *new; - - new = kmalloc(strlen(string) + 1, GFP_KERNEL); - if(new == NULL) return(NULL); - strcpy(new, string); - return(new); + return kstrdup(string, GFP_KERNEL); } int copy_to_user_proc(void __user *to, void *from, int size) @@ -416,7 +412,7 @@ int __init make_proc_sysemu(void) if (ent == NULL) { - printk("Failed to register /proc/sysemu\n"); + printk(KERN_WARNING "Failed to register /proc/sysemu\n"); return(0); } diff --git a/arch/um/kernel/reboot.c b/arch/um/kernel/reboot.c index 207f89d74908..a637e885c583 100644 --- a/arch/um/kernel/reboot.c +++ b/arch/um/kernel/reboot.c @@ -38,35 +38,28 @@ static void kill_off_processes(void) void uml_cleanup(void) { - kill_off_processes(); + kmalloc_ok = 0; do_uml_exitcalls(); + kill_off_processes(); } void machine_restart(char * __unused) { - do_uml_exitcalls(); - kill_off_processes(); + uml_cleanup(); CHOOSE_MODE(reboot_tt(), reboot_skas()); } -EXPORT_SYMBOL(machine_restart); - void machine_power_off(void) { - do_uml_exitcalls(); - kill_off_processes(); + uml_cleanup(); CHOOSE_MODE(halt_tt(), halt_skas()); } -EXPORT_SYMBOL(machine_power_off); - void machine_halt(void) { machine_power_off(); } -EXPORT_SYMBOL(machine_halt); - /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically diff --git a/arch/um/kernel/skas/Makefile b/arch/um/kernel/skas/Makefile index d37d1bfcd6f7..d296d55ade4b 100644 --- a/arch/um/kernel/skas/Makefile +++ b/arch/um/kernel/skas/Makefile @@ -3,11 +3,14 @@ # Licensed under the GPL # -obj-y := exec_kern.o mem.o mem_user.o mmu.o process.o process_kern.o \ - syscall_kern.o syscall_user.o time.o tlb.o trap_user.o uaccess.o \ +obj-y := clone.o exec_kern.o mem.o mem_user.o mmu.o process.o process_kern.o \ + syscall_kern.o syscall_user.o tlb.o trap_user.o uaccess.o \ subdir- := util -USER_OBJS := process.o time.o +USER_OBJS := process.o clone.o include arch/um/scripts/Makefile.rules + +# clone.o is in the stub, so it can't be built with profiling +$(obj)/clone.o : c_flags = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS)) diff --git a/arch/um/kernel/skas/clone.c b/arch/um/kernel/skas/clone.c new file mode 100644 index 000000000000..4dc55f10cd18 --- /dev/null +++ b/arch/um/kernel/skas/clone.c @@ -0,0 +1,44 @@ +#include <sched.h> +#include <signal.h> +#include <sys/mman.h> +#include <sys/time.h> +#include <asm/unistd.h> +#include <asm/page.h> +#include "ptrace_user.h" +#include "skas.h" +#include "stub-data.h" +#include "uml-config.h" +#include "sysdep/stub.h" + +/* This is in a separate file because it needs to be compiled with any + * extraneous gcc flags (-pg, -fprofile-arcs, -ftest-coverage) disabled + */ +void __attribute__ ((__section__ (".__syscall_stub"))) +stub_clone_handler(void) +{ + long err; + struct stub_data *from = (struct stub_data *) UML_CONFIG_STUB_DATA; + + err = stub_syscall2(__NR_clone, CLONE_PARENT | CLONE_FILES | SIGCHLD, + UML_CONFIG_STUB_DATA + PAGE_SIZE / 2 - + sizeof(void *)); + if(err != 0) + goto out; + + err = stub_syscall4(__NR_ptrace, PTRACE_TRACEME, 0, 0, 0); + if(err) + goto out; + + err = stub_syscall3(__NR_setitimer, ITIMER_VIRTUAL, + (long) &from->timer, 0); + if(err) + goto out; + + err = stub_syscall6(STUB_MMAP_NR, UML_CONFIG_STUB_DATA, PAGE_SIZE, + PROT_READ | PROT_WRITE, MAP_FIXED | MAP_SHARED, + from->fd, from->offset); + out: + /* save current result. Parent: pid; child: retcode of mmap */ + from->err = err; + trap_myself(); +} diff --git a/arch/um/kernel/skas/exec_kern.c b/arch/um/kernel/skas/exec_kern.c index c6b4d5dba789..77ed7bbab219 100644 --- a/arch/um/kernel/skas/exec_kern.c +++ b/arch/um/kernel/skas/exec_kern.c @@ -18,7 +18,7 @@ void flush_thread_skas(void) { force_flush_all(); - switch_mm_skas(current->mm->context.skas.mm_fd); + switch_mm_skas(¤t->mm->context.skas.id); } void start_thread_skas(struct pt_regs *regs, unsigned long eip, diff --git a/arch/um/kernel/skas/include/mm_id.h b/arch/um/kernel/skas/include/mm_id.h new file mode 100644 index 000000000000..48dd0989ddaa --- /dev/null +++ b/arch/um/kernel/skas/include/mm_id.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2005 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#ifndef __MM_ID_H +#define __MM_ID_H + +struct mm_id { + union { + int mm_fd; + int pid; + } u; + unsigned long stack; +}; + +#endif diff --git a/arch/um/kernel/skas/include/mmu-skas.h b/arch/um/kernel/skas/include/mmu-skas.h index 4cd60d7213f3..278b72f1d9ad 100644 --- a/arch/um/kernel/skas/include/mmu-skas.h +++ b/arch/um/kernel/skas/include/mmu-skas.h @@ -6,10 +6,15 @@ #ifndef __SKAS_MMU_H #define __SKAS_MMU_H +#include "mm_id.h" + struct mmu_context_skas { - int mm_fd; + struct mm_id id; + unsigned long last_page_table; }; +extern void switch_mm_skas(struct mm_id * mm_idp); + #endif /* diff --git a/arch/um/kernel/skas/include/mode-skas.h b/arch/um/kernel/skas/include/mode-skas.h index c1e33bd788db..bcd26a6a3888 100644 --- a/arch/um/kernel/skas/include/mode-skas.h +++ b/arch/um/kernel/skas/include/mode-skas.h @@ -13,7 +13,6 @@ extern unsigned long exec_fp_regs[]; extern unsigned long exec_fpx_regs[]; extern int have_fpx_regs; -extern void user_time_init_skas(void); extern void sig_handler_common_skas(int sig, void *sc_ptr); extern void halt_skas(void); extern void reboot_skas(void); diff --git a/arch/um/kernel/skas/include/skas.h b/arch/um/kernel/skas/include/skas.h index 96b51dba3471..d983ea842547 100644 --- a/arch/um/kernel/skas/include/skas.h +++ b/arch/um/kernel/skas/include/skas.h @@ -6,9 +6,11 @@ #ifndef __SKAS_H #define __SKAS_H +#include "mm_id.h" #include "sysdep/ptrace.h" extern int userspace_pid[]; +extern int proc_mm, ptrace_faultinfo; extern void switch_threads(void *me, void *next); extern void thread_wait(void *sw, void *fb); @@ -22,16 +24,18 @@ extern void new_thread_proc(void *stack, void (*handler)(int sig)); extern void remove_sigstack(void); extern void new_thread_handler(int sig); extern void handle_syscall(union uml_pt_regs *regs); -extern void map(int fd, unsigned long virt, unsigned long len, int r, int w, - int x, int phys_fd, unsigned long long offset); -extern int unmap(int fd, void *addr, unsigned long len); -extern int protect(int fd, unsigned long addr, unsigned long len, - int r, int w, int x); +extern int map(struct mm_id * mm_idp, unsigned long virt, unsigned long len, + int r, int w, int x, int phys_fd, unsigned long long offset); +extern int unmap(struct mm_id * mm_idp, void *addr, unsigned long len); +extern int protect(struct mm_id * mm_idp, unsigned long addr, + unsigned long len, int r, int w, int x); extern void user_signal(int sig, union uml_pt_regs *regs, int pid); extern int new_mm(int from); -extern void start_userspace(int cpu); +extern int start_userspace(unsigned long stub_stack); +extern int copy_context_skas0(unsigned long stack, int pid); extern void get_skas_faultinfo(int pid, struct faultinfo * fi); extern long execute_syscall_skas(void *r); +extern unsigned long current_stub_stack(void); #endif diff --git a/arch/um/kernel/skas/include/stub-data.h b/arch/um/kernel/skas/include/stub-data.h new file mode 100644 index 000000000000..f6ed92c3727d --- /dev/null +++ b/arch/um/kernel/skas/include/stub-data.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2005 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#ifndef __STUB_DATA_H +#define __STUB_DATA_H + +#include <sys/time.h> + +struct stub_data { + long offset; + int fd; + struct itimerval timer; + long err; +}; + +#endif diff --git a/arch/um/kernel/skas/mem.c b/arch/um/kernel/skas/mem.c index 438db2f43456..147466d7ff4f 100644 --- a/arch/um/kernel/skas/mem.c +++ b/arch/um/kernel/skas/mem.c @@ -5,7 +5,9 @@ #include "linux/config.h" #include "linux/mm.h" +#include "asm/pgtable.h" #include "mem_user.h" +#include "skas.h" unsigned long set_task_sizes_skas(int arg, unsigned long *host_size_out, unsigned long *task_size_out) @@ -18,7 +20,9 @@ unsigned long set_task_sizes_skas(int arg, unsigned long *host_size_out, *task_size_out = CONFIG_HOST_TASK_SIZE; #else *host_size_out = top; - *task_size_out = top; + if (proc_mm && ptrace_faultinfo) + *task_size_out = top; + else *task_size_out = CONFIG_STUB_START & PGDIR_MASK; #endif return(((unsigned long) set_task_sizes_skas) & ~0xffffff); } diff --git a/arch/um/kernel/skas/mem_user.c b/arch/um/kernel/skas/mem_user.c index 1310bf1e88d1..b0980ff3bd95 100644 --- a/arch/um/kernel/skas/mem_user.c +++ b/arch/um/kernel/skas/mem_user.c @@ -3,100 +3,171 @@ * Licensed under the GPL */ +#include <signal.h> #include <errno.h> #include <sys/mman.h> +#include <sys/wait.h> +#include <asm/page.h> +#include <asm/unistd.h> #include "mem_user.h" #include "mem.h" +#include "mm_id.h" #include "user.h" #include "os.h" #include "proc_mm.h" - -void map(int fd, unsigned long virt, unsigned long len, int r, int w, - int x, int phys_fd, unsigned long long offset) +#include "ptrace_user.h" +#include "user_util.h" +#include "kern_util.h" +#include "task.h" +#include "registers.h" +#include "uml-config.h" +#include "sysdep/ptrace.h" +#include "sysdep/stub.h" +#include "skas.h" + +extern unsigned long syscall_stub, __syscall_stub_start; + +extern void wait_stub_done(int pid, int sig, char * fname); + +static long run_syscall_stub(struct mm_id * mm_idp, int syscall, + unsigned long *args) { - struct proc_mm_op map; - int prot, n; - - prot = (r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) | - (x ? PROT_EXEC : 0); - - map = ((struct proc_mm_op) { .op = MM_MMAP, - .u = - { .mmap = - { .addr = virt, - .len = len, - .prot = prot, - .flags = MAP_SHARED | - MAP_FIXED, - .fd = phys_fd, - .offset = offset - } } } ); - n = os_write_file(fd, &map, sizeof(map)); - if(n != sizeof(map)) - printk("map : /proc/mm map failed, err = %d\n", -n); + int n, pid = mm_idp->u.pid; + unsigned long regs[MAX_REG_NR]; + + get_safe_registers(regs); + regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE + + ((unsigned long) &syscall_stub - + (unsigned long) &__syscall_stub_start); + /* XXX Don't have a define for starting a syscall */ + regs[REGS_SYSCALL_NR] = syscall; + regs[REGS_SYSCALL_ARG1] = args[0]; + regs[REGS_SYSCALL_ARG2] = args[1]; + regs[REGS_SYSCALL_ARG3] = args[2]; + regs[REGS_SYSCALL_ARG4] = args[3]; + regs[REGS_SYSCALL_ARG5] = args[4]; + regs[REGS_SYSCALL_ARG6] = args[5]; + n = ptrace_setregs(pid, regs); + if(n < 0){ + printk("run_syscall_stub : PTRACE_SETREGS failed, " + "errno = %d\n", n); + return(n); + } + + wait_stub_done(pid, 0, "run_syscall_stub"); + + return(*((unsigned long *) mm_idp->stack)); } -int unmap(int fd, void *addr, unsigned long len) +int map(struct mm_id *mm_idp, unsigned long virt, unsigned long len, + int r, int w, int x, int phys_fd, unsigned long long offset) { - struct proc_mm_op unmap; - int n; - - unmap = ((struct proc_mm_op) { .op = MM_MUNMAP, - .u = - { .munmap = - { .addr = (unsigned long) addr, - .len = len } } } ); - n = os_write_file(fd, &unmap, sizeof(unmap)); - if(n != sizeof(unmap)) { - if(n < 0) - return(n); - else if(n > 0) - return(-EIO); - } - - return(0); + int prot, n; + + prot = (r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) | + (x ? PROT_EXEC : 0); + + if(proc_mm){ + struct proc_mm_op map; + int fd = mm_idp->u.mm_fd; + map = ((struct proc_mm_op) { .op = MM_MMAP, + .u = + { .mmap = + { .addr = virt, + .len = len, + .prot = prot, + .flags = MAP_SHARED | + MAP_FIXED, + .fd = phys_fd, + .offset= offset + } } } ); + n = os_write_file(fd, &map, sizeof(map)); + if(n != sizeof(map)) + printk("map : /proc/mm map failed, err = %d\n", -n); + } + else { + long res; + unsigned long args[] = { virt, len, prot, + MAP_SHARED | MAP_FIXED, phys_fd, + MMAP_OFFSET(offset) }; + + res = run_syscall_stub(mm_idp, STUB_MMAP_NR, args); + if((void *) res == MAP_FAILED) + printk("mmap stub failed, errno = %d\n", res); + } + + return 0; } -int protect(int fd, unsigned long addr, unsigned long len, int r, int w, - int x, int must_succeed) +int unmap(struct mm_id *mm_idp, void *addr, unsigned long len) { - struct proc_mm_op protect; - int prot, n; - - prot = (r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) | - (x ? PROT_EXEC : 0); - - protect = ((struct proc_mm_op) { .op = MM_MPROTECT, - .u = - { .mprotect = - { .addr = (unsigned long) addr, - .len = len, - .prot = prot } } } ); - - n = os_write_file(fd, &protect, sizeof(protect)); - if(n != sizeof(protect)) { - if(n == 0) return(0); - - if(must_succeed) - panic("protect failed, err = %d", -n); - - return(-EIO); - } + int n; + + if(proc_mm){ + struct proc_mm_op unmap; + int fd = mm_idp->u.mm_fd; + unmap = ((struct proc_mm_op) { .op = MM_MUNMAP, + .u = + { .munmap = + { .addr = + (unsigned long) addr, + .len = len } } } ); + n = os_write_file(fd, &unmap, sizeof(unmap)); + if(n != sizeof(unmap)) { + if(n < 0) + return(n); + else if(n > 0) + return(-EIO); + } + } + else { + int res; + unsigned long args[] = { (unsigned long) addr, len, 0, 0, 0, + 0 }; + + res = run_syscall_stub(mm_idp, __NR_munmap, args); + if(res < 0) + printk("munmap stub failed, errno = %d\n", res); + } + + return(0); +} - return(0); +int protect(struct mm_id *mm_idp, unsigned long addr, unsigned long len, + int r, int w, int x) +{ + struct proc_mm_op protect; + int prot, n; + + prot = (r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) | + (x ? PROT_EXEC : 0); + + if(proc_mm){ + int fd = mm_idp->u.mm_fd; + protect = ((struct proc_mm_op) { .op = MM_MPROTECT, + .u = + { .mprotect = + { .addr = + (unsigned long) addr, + .len = len, + .prot = prot } } } ); + + n = os_write_file(fd, &protect, sizeof(protect)); + if(n != sizeof(protect)) + panic("protect failed, err = %d", -n); + } + else { + int res; + unsigned long args[] = { addr, len, prot, 0, 0, 0 }; + + res = run_syscall_stub(mm_idp, __NR_mprotect, args); + if(res < 0) + panic("mprotect stub failed, errno = %d\n", res); + } + + return(0); } void before_mem_skas(unsigned long unused) { } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c index 6cb9a6d028a9..d232daa42c31 100644 --- a/arch/um/kernel/skas/mmu.c +++ b/arch/um/kernel/skas/mmu.c @@ -3,46 +3,143 @@ * Licensed under the GPL */ +#include "linux/config.h" #include "linux/sched.h" #include "linux/list.h" #include "linux/spinlock.h" #include "linux/slab.h" +#include "linux/errno.h" +#include "linux/mm.h" #include "asm/current.h" #include "asm/segment.h" #include "asm/mmu.h" +#include "asm/pgalloc.h" +#include "asm/pgtable.h" #include "os.h" #include "skas.h" +extern int __syscall_stub_start; + +static int init_stub_pte(struct mm_struct *mm, unsigned long proc, + unsigned long kernel) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + + spin_lock(&mm->page_table_lock); + pgd = pgd_offset(mm, proc); + pud = pud_alloc(mm, pgd, proc); + if (!pud) + goto out; + + pmd = pmd_alloc(mm, pud, proc); + if (!pmd) + goto out_pmd; + + pte = pte_alloc_map(mm, pmd, proc); + if (!pte) + goto out_pte; + + /* There's an interaction between the skas0 stub pages, stack + * randomization, and the BUG at the end of exit_mmap. exit_mmap + * checks that the number of page tables freed is the same as had + * been allocated. If the stack is on the last page table page, + * then the stack pte page will be freed, and if not, it won't. To + * avoid having to know where the stack is, or if the process mapped + * something at the top of its address space for some other reason, + * we set TASK_SIZE to end at the start of the last page table. + * This keeps exit_mmap off the last page, but introduces a leak + * of that page. So, we hang onto it here and free it in + * destroy_context_skas. + */ + + mm->context.skas.last_page_table = pmd_page_kernel(*pmd); + + *pte = mk_pte(virt_to_page(kernel), __pgprot(_PAGE_PRESENT)); + *pte = pte_mkexec(*pte); + *pte = pte_wrprotect(*pte); + spin_unlock(&mm->page_table_lock); + return(0); + + out_pmd: + pud_free(pud); + out_pte: + pmd_free(pmd); + out: + spin_unlock(&mm->page_table_lock); + return(-ENOMEM); +} + int init_new_context_skas(struct task_struct *task, struct mm_struct *mm) { - int from; + struct mm_struct *cur_mm = current->mm; + struct mm_id *cur_mm_id = &cur_mm->context.skas.id; + struct mm_id *mm_id = &mm->context.skas.id; + unsigned long stack; + int from, ret; - if((current->mm != NULL) && (current->mm != &init_mm)) - from = current->mm->context.skas.mm_fd; - else from = -1; + if(proc_mm){ + if((cur_mm != NULL) && (cur_mm != &init_mm)) + from = cur_mm->context.skas.id.u.mm_fd; + else from = -1; - mm->context.skas.mm_fd = new_mm(from); - if(mm->context.skas.mm_fd < 0){ - printk("init_new_context_skas - new_mm failed, errno = %d\n", - mm->context.skas.mm_fd); - return(mm->context.skas.mm_fd); + ret = new_mm(from); + if(ret < 0){ + printk("init_new_context_skas - new_mm failed, " + "errno = %d\n", ret); + return ret; + } + mm_id->u.mm_fd = ret; } + else { + /* This zeros the entry that pgd_alloc didn't, needed since + * we are about to reinitialize it, and want mm.nr_ptes to + * be accurate. + */ + mm->pgd[USER_PTRS_PER_PGD] = __pgd(0); - return(0); + ret = init_stub_pte(mm, CONFIG_STUB_CODE, + (unsigned long) &__syscall_stub_start); + if(ret) + goto out; + + ret = -ENOMEM; + stack = get_zeroed_page(GFP_KERNEL); + if(stack == 0) + goto out; + mm_id->stack = stack; + + ret = init_stub_pte(mm, CONFIG_STUB_DATA, stack); + if(ret) + goto out_free; + + mm->nr_ptes--; + + if((cur_mm != NULL) && (cur_mm != &init_mm)) + mm_id->u.pid = copy_context_skas0(stack, + cur_mm_id->u.pid); + else mm_id->u.pid = start_userspace(stack); + } + + return 0; + + out_free: + free_page(mm_id->stack); + out: + return ret; } void destroy_context_skas(struct mm_struct *mm) { - os_close_file(mm->context.skas.mm_fd); -} + struct mmu_context_skas *mmu = &mm->context.skas; -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ + if(proc_mm) + os_close_file(mmu->id.u.mm_fd); + else { + os_kill_ptraced_process(mmu->id.u.pid, 1); + free_page(mmu->id.stack); + free_page(mmu->last_page_table); + } +} diff --git a/arch/um/kernel/skas/process.c b/arch/um/kernel/skas/process.c index 773cd2b525fc..6dd9e5bf18ed 100644 --- a/arch/um/kernel/skas/process.c +++ b/arch/um/kernel/skas/process.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Copyright (C) 2002- 2004 Jeff Dike (jdike@addtoit.com) * Licensed under the GPL */ @@ -13,7 +13,9 @@ #include <sys/wait.h> #include <sys/mman.h> #include <sys/user.h> +#include <sys/time.h> #include <asm/unistd.h> +#include <asm/types.h> #include "user.h" #include "ptrace_user.h" #include "time_user.h" @@ -21,13 +23,18 @@ #include "user_util.h" #include "kern_util.h" #include "skas.h" +#include "stub-data.h" +#include "mm_id.h" #include "sysdep/sigcontext.h" +#include "sysdep/stub.h" #include "os.h" #include "proc_mm.h" #include "skas_ptrace.h" #include "chan_user.h" #include "signal_user.h" #include "registers.h" +#include "mem.h" +#include "uml-config.h" #include "process.h" int is_skas_winch(int pid, int fd, void *data) @@ -39,20 +46,55 @@ int is_skas_winch(int pid, int fd, void *data) return(1); } -void get_skas_faultinfo(int pid, struct faultinfo * fi) +void wait_stub_done(int pid, int sig, char * fname) { - int err; - - err = ptrace(PTRACE_FAULTINFO, pid, 0, fi); - if(err) - panic("get_skas_faultinfo - PTRACE_FAULTINFO failed, " - "errno = %d\n", errno); + int n, status, err; + + do { + if ( sig != -1 ) { + err = ptrace(PTRACE_CONT, pid, 0, sig); + if(err) + panic("%s : continue failed, errno = %d\n", + fname, errno); + } + sig = 0; + + CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); + } while((n >= 0) && WIFSTOPPED(status) && + (WSTOPSIG(status) == SIGVTALRM)); + + if((n < 0) || !WIFSTOPPED(status) || + (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){ + panic("%s : failed to wait for SIGUSR1/SIGTRAP, " + "pid = %d, n = %d, errno = %d, status = 0x%x\n", + fname, pid, n, errno, status); + } +} - /* Special handling for i386, which has different structs */ - if (sizeof(struct ptrace_faultinfo) < sizeof(struct faultinfo)) - memset((char *)fi + sizeof(struct ptrace_faultinfo), 0, - sizeof(struct faultinfo) - - sizeof(struct ptrace_faultinfo)); +void get_skas_faultinfo(int pid, struct faultinfo * fi) +{ + int err; + + if(ptrace_faultinfo){ + err = ptrace(PTRACE_FAULTINFO, pid, 0, fi); + if(err) + panic("get_skas_faultinfo - PTRACE_FAULTINFO failed, " + "errno = %d\n", errno); + + /* Special handling for i386, which has different structs */ + if (sizeof(struct ptrace_faultinfo) < sizeof(struct faultinfo)) + memset((char *)fi + sizeof(struct ptrace_faultinfo), 0, + sizeof(struct faultinfo) - + sizeof(struct ptrace_faultinfo)); + } + else { + wait_stub_done(pid, SIGSEGV, "get_skas_faultinfo"); + + /* faultinfo is prepared by the stub-segv-handler at start of + * the stub stack page. We just have to copy it. + */ + memcpy(fi, (void *)current_stub_stack(), sizeof(*fi)); + } } static void handle_segv(int pid, union uml_pt_regs * regs) @@ -91,11 +133,56 @@ static void handle_trap(int pid, union uml_pt_regs *regs, int local_using_sysemu handle_syscall(regs); } -static int userspace_tramp(void *arg) +extern int __syscall_stub_start; + +static int userspace_tramp(void *stack) { - init_new_thread_signals(0); - enable_timer(); + void *addr; + ptrace(PTRACE_TRACEME, 0, 0, 0); + + init_new_thread_signals(1); + enable_timer(); + + if(!proc_mm){ + /* This has a pte, but it can't be mapped in with the usual + * tlb_flush mechanism because this is part of that mechanism + */ + int fd; + __u64 offset; + + fd = phys_mapping(to_phys(&__syscall_stub_start), &offset); + addr = mmap64((void *) UML_CONFIG_STUB_CODE, page_size(), + PROT_EXEC, MAP_FIXED | MAP_PRIVATE, fd, offset); + if(addr == MAP_FAILED){ + printk("mapping mmap stub failed, errno = %d\n", + errno); + exit(1); + } + + if(stack != NULL){ + fd = phys_mapping(to_phys(stack), &offset); + addr = mmap((void *) UML_CONFIG_STUB_DATA, page_size(), + PROT_READ | PROT_WRITE, + MAP_FIXED | MAP_SHARED, fd, offset); + if(addr == MAP_FAILED){ + printk("mapping segfault stack failed, " + "errno = %d\n", errno); + exit(1); + } + } + } + if(!ptrace_faultinfo && (stack != NULL)){ + unsigned long v = UML_CONFIG_STUB_CODE + + (unsigned long) stub_segv_handler - + (unsigned long) &__syscall_stub_start; + + set_sigstack((void *) UML_CONFIG_STUB_DATA, page_size()); + set_handler(SIGSEGV, (void *) v, SA_ONSTACK, + SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, + SIGUSR1, -1); + } + os_stop_process(os_getpid()); return(0); } @@ -105,11 +192,11 @@ static int userspace_tramp(void *arg) #define NR_CPUS 1 int userspace_pid[NR_CPUS]; -void start_userspace(int cpu) +int start_userspace(unsigned long stub_stack) { void *stack; unsigned long sp; - int pid, status, n; + int pid, status, n, flags; stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); @@ -117,8 +204,9 @@ void start_userspace(int cpu) panic("start_userspace : mmap failed, errno = %d", errno); sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *); - pid = clone(userspace_tramp, (void *) sp, - CLONE_FILES | CLONE_VM | SIGCHLD, NULL); + flags = CLONE_FILES | SIGCHLD; + if(proc_mm) flags |= CLONE_VM; + pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack); if(pid < 0) panic("start_userspace : clone failed, errno = %d", errno); @@ -140,7 +228,7 @@ void start_userspace(int cpu) if(munmap(stack, PAGE_SIZE) < 0) panic("start_userspace : munmap failed, errno = %d\n", errno); - userspace_pid[cpu] = pid; + return(pid); } void userspace(union uml_pt_regs *regs) @@ -174,7 +262,9 @@ void userspace(union uml_pt_regs *regs) if(WIFSTOPPED(status)){ switch(WSTOPSIG(status)){ case SIGSEGV: - handle_segv(pid, regs); + if(PTRACE_FULL_FAULTINFO || !ptrace_faultinfo) + user_signal(SIGSEGV, regs, pid); + else handle_segv(pid, regs); break; case SIGTRAP + 0x80: handle_trap(pid, regs, local_using_sysemu); @@ -194,6 +284,7 @@ void userspace(union uml_pt_regs *regs) printk("userspace - child stopped with signal " "%d\n", WSTOPSIG(status)); } + pid = userspace_pid[0]; interrupt_end(); /* Avoid -ERESTARTSYS handling in host */ @@ -207,6 +298,67 @@ void userspace(union uml_pt_regs *regs) #define INIT_JMP_HALT 3 #define INIT_JMP_REBOOT 4 + +int copy_context_skas0(unsigned long new_stack, int pid) +{ + int err; + unsigned long regs[MAX_REG_NR]; + unsigned long current_stack = current_stub_stack(); + struct stub_data *data = (struct stub_data *) current_stack; + struct stub_data *child_data = (struct stub_data *) new_stack; + __u64 new_offset; + int new_fd = phys_mapping(to_phys((void *)new_stack), &new_offset); + + /* prepare offset and fd of child's stack as argument for parent's + * and child's mmap2 calls + */ + *data = ((struct stub_data) { .offset = MMAP_OFFSET(new_offset), + .fd = new_fd, + .timer = ((struct itimerval) + { { 0, 1000000 / hz() }, + { 0, 1000000 / hz() }})}); + get_safe_registers(regs); + + /* Set parent's instruction pointer to start of clone-stub */ + regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE + + (unsigned long) stub_clone_handler - + (unsigned long) &__syscall_stub_start; + regs[REGS_SP_INDEX] = UML_CONFIG_STUB_DATA + PAGE_SIZE - + sizeof(void *); + err = ptrace_setregs(pid, regs); + if(err < 0) + panic("copy_context_skas0 : PTRACE_SETREGS failed, " + "pid = %d, errno = %d\n", pid, errno); + + /* set a well known return code for detection of child write failure */ + child_data->err = 12345678; + + /* Wait, until parent has finished its work: read child's pid from + * parent's stack, and check, if bad result. + */ + wait_stub_done(pid, 0, "copy_context_skas0"); + + pid = data->err; + if(pid < 0) + panic("copy_context_skas0 - stub-parent reports error %d\n", + pid); + + /* Wait, until child has finished too: read child's result from + * child's stack and check it. + */ + wait_stub_done(pid, -1, "copy_context_skas0"); + if (child_data->err != UML_CONFIG_STUB_DATA) + panic("copy_context_skas0 - stub-child reports error %d\n", + child_data->err); + + if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL, + (void *)PTRACE_O_TRACESYSGOOD) < 0) + panic("copy_context_skas0 : PTRACE_SETOPTIONS failed, " + "errno = %d\n", errno); + + return pid; +} + void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr, void (*handler)(int)) { @@ -334,21 +486,19 @@ void reboot_skas(void) siglongjmp(initial_jmpbuf, INIT_JMP_REBOOT); } -void switch_mm_skas(int mm_fd) +void switch_mm_skas(struct mm_id *mm_idp) { int err; #warning need cpu pid in switch_mm_skas - err = ptrace(PTRACE_SWITCH_MM, userspace_pid[0], 0, mm_fd); - if(err) - panic("switch_mm_skas - PTRACE_SWITCH_MM failed, errno = %d\n", - errno); -} - -void kill_off_processes_skas(void) -{ -#warning need to loop over userspace_pids in kill_off_processes_skas - os_kill_ptraced_process(userspace_pid[0], 1); + if(proc_mm){ + err = ptrace(PTRACE_SWITCH_MM, userspace_pid[0], 0, + mm_idp->u.mm_fd); + if(err) + panic("switch_mm_skas - PTRACE_SWITCH_MM failed, " + "errno = %d\n", errno); + } + else userspace_pid[0] = mm_idp->u.pid; } /* diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c index fc71ef295782..cbabab104ac3 100644 --- a/arch/um/kernel/skas/process_kern.c +++ b/arch/um/kernel/skas/process_kern.c @@ -111,8 +111,7 @@ int copy_thread_skas(int nr, unsigned long clone_flags, unsigned long sp, void (*handler)(int); if(current->thread.forking){ - memcpy(&p->thread.regs.regs.skas, - ¤t->thread.regs.regs.skas, + memcpy(&p->thread.regs.regs.skas, ®s->regs.skas, sizeof(p->thread.regs.regs.skas)); REGS_SET_SYSCALL_RETURN(p->thread.regs.regs.skas.regs, 0); if(sp != 0) REGS_SP(p->thread.regs.regs.skas.regs) = sp; @@ -176,12 +175,14 @@ static int start_kernel_proc(void *unused) return(0); } +extern int userspace_pid[]; + int start_uml_skas(void) { - start_userspace(0); + if(proc_mm) + userspace_pid[0] = start_userspace(0); init_new_thread_signals(1); - uml_idle_timer(); init_task.thread.request.u.thread.proc = start_kernel_proc; init_task.thread.request.u.thread.arg = NULL; @@ -202,13 +203,30 @@ int thread_pid_skas(struct task_struct *task) return(userspace_pid[0]); } -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ +void kill_off_processes_skas(void) +{ + if(proc_mm) +#warning need to loop over userspace_pids in kill_off_processes_skas + os_kill_ptraced_process(userspace_pid[0], 1); + else { + struct task_struct *p; + int pid, me; + + me = os_getpid(); + for_each_process(p){ + if(p->mm == NULL) + continue; + + pid = p->mm->context.skas.id.u.pid; + os_kill_ptraced_process(pid, 1); + } + } +} + +unsigned long current_stub_stack(void) +{ + if(current->mm == NULL) + return(0); + + return(current->mm->context.skas.id.stack); +} diff --git a/arch/um/kernel/skas/syscall_user.c b/arch/um/kernel/skas/syscall_user.c index 2828e6e37721..6b0664970147 100644 --- a/arch/um/kernel/skas/syscall_user.c +++ b/arch/um/kernel/skas/syscall_user.c @@ -15,7 +15,7 @@ void handle_syscall(union uml_pt_regs *regs) { long result; -#if UML_CONFIG_SYSCALL_DEBUG +#ifdef UML_CONFIG_SYSCALL_DEBUG int index; index = record_syscall_start(UPT_SYSCALL_NR(regs)); @@ -27,7 +27,7 @@ void handle_syscall(union uml_pt_regs *regs) REGS_SET_SYSCALL_RETURN(regs->skas.regs, result); syscall_trace(regs, 1); -#if UML_CONFIG_SYSCALL_DEBUG +#ifdef UML_CONFIG_SYSCALL_DEBUG record_syscall_end(index, result); #endif } diff --git a/arch/um/kernel/skas/time.c b/arch/um/kernel/skas/time.c deleted file mode 100644 index 98091494b897..000000000000 --- a/arch/um/kernel/skas/time.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include <sys/signal.h> -#include <sys/time.h> -#include "time_user.h" -#include "process.h" -#include "user.h" - -void user_time_init_skas(void) -{ - if(signal(SIGALRM, (__sighandler_t) alarm_handler) == SIG_ERR) - panic("Couldn't set SIGALRM handler"); - if(signal(SIGVTALRM, (__sighandler_t) alarm_handler) == SIG_ERR) - panic("Couldn't set SIGVTALRM handler"); - set_interval(ITIMER_VIRTUAL); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/skas/tlb.c b/arch/um/kernel/skas/tlb.c index b8c5e71763d1..6230999c672c 100644 --- a/arch/um/kernel/skas/tlb.c +++ b/arch/um/kernel/skas/tlb.c @@ -6,6 +6,7 @@ #include "linux/stddef.h" #include "linux/sched.h" +#include "linux/config.h" #include "linux/mm.h" #include "asm/page.h" #include "asm/pgtable.h" @@ -17,7 +18,7 @@ #include "os.h" #include "tlb.h" -static void do_ops(int fd, struct host_vm_op *ops, int last) +static void do_ops(union mm_context *mmu, struct host_vm_op *ops, int last) { struct host_vm_op *op; int i; @@ -26,18 +27,18 @@ static void do_ops(int fd, struct host_vm_op *ops, int last) op = &ops[i]; switch(op->type){ case MMAP: - map(fd, op->u.mmap.addr, op->u.mmap.len, + map(&mmu->skas.id, op->u.mmap.addr, op->u.mmap.len, op->u.mmap.r, op->u.mmap.w, op->u.mmap.x, op->u.mmap.fd, op->u.mmap.offset); break; case MUNMAP: - unmap(fd, (void *) op->u.munmap.addr, + unmap(&mmu->skas.id, (void *) op->u.munmap.addr, op->u.munmap.len); break; case MPROTECT: - protect(fd, op->u.mprotect.addr, op->u.mprotect.len, - op->u.mprotect.r, op->u.mprotect.w, - op->u.mprotect.x); + protect(&mmu->skas.id, op->u.mprotect.addr, + op->u.mprotect.len, op->u.mprotect.r, + op->u.mprotect.w, op->u.mprotect.x); break; default: printk("Unknown op type %d in do_ops\n", op->type); @@ -46,12 +47,15 @@ static void do_ops(int fd, struct host_vm_op *ops, int last) } } +extern int proc_mm; + static void fix_range(struct mm_struct *mm, unsigned long start_addr, unsigned long end_addr, int force) { - int fd = mm->context.skas.mm_fd; + if(!proc_mm && (end_addr > CONFIG_STUB_START)) + end_addr = CONFIG_STUB_START; - fix_range_common(mm, start_addr, end_addr, force, fd, do_ops); + fix_range_common(mm, start_addr, end_addr, force, do_ops); } void __flush_tlb_one_skas(unsigned long addr) @@ -69,17 +73,20 @@ void flush_tlb_range_skas(struct vm_area_struct *vma, unsigned long start, void flush_tlb_mm_skas(struct mm_struct *mm) { + unsigned long end; + /* Don't bother flushing if this address space is about to be * destroyed. */ if(atomic_read(&mm->mm_users) == 0) return; - fix_range(mm, 0, host_task_size, 0); - flush_tlb_kernel_range_common(start_vm, end_vm); + end = proc_mm ? task_size : CONFIG_STUB_START; + fix_range(mm, 0, end, 0); } void force_flush_all_skas(void) { - fix_range(current->mm, 0, host_task_size, 1); + unsigned long end = proc_mm ? task_size : CONFIG_STUB_START; + fix_range(current->mm, 0, end, 1); } diff --git a/arch/um/kernel/skas/trap_user.c b/arch/um/kernel/skas/trap_user.c index 0dee1d95c806..9950a6716fe5 100644 --- a/arch/um/kernel/skas/trap_user.c +++ b/arch/um/kernel/skas/trap_user.c @@ -58,7 +58,6 @@ void user_signal(int sig, union uml_pt_regs *regs, int pid) int segv = ((sig == SIGFPE) || (sig == SIGSEGV) || (sig == SIGBUS) || (sig == SIGILL) || (sig == SIGTRAP)); - regs->skas.is_user = 1; if (segv) get_skas_faultinfo(pid, ®s->skas.faultinfo); info = &sig_info[sig]; diff --git a/arch/um/kernel/syscall_kern.c b/arch/um/kernel/syscall_kern.c index b7a55251e897..8e1a3501ff46 100644 --- a/arch/um/kernel/syscall_kern.c +++ b/arch/um/kernel/syscall_kern.c @@ -31,7 +31,8 @@ long sys_fork(void) long ret; current->thread.forking = 1; - ret = do_fork(SIGCHLD, 0, NULL, 0, NULL, NULL); + ret = do_fork(SIGCHLD, UPT_SP(¤t->thread.regs.regs), + ¤t->thread.regs, 0, NULL, NULL); current->thread.forking = 0; return(ret); } @@ -41,8 +42,9 @@ long sys_vfork(void) long ret; current->thread.forking = 1; - ret = do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, 0, NULL, 0, NULL, - NULL); + ret = do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, + UPT_SP(¤t->thread.regs.regs), + ¤t->thread.regs, 0, NULL, NULL); current->thread.forking = 0; return(ret); } @@ -162,14 +164,3 @@ int next_syscall_index(int limit) spin_unlock(&syscall_lock); return(ret); } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c index c40c86a3f918..c40b611e3d93 100644 --- a/arch/um/kernel/time.c +++ b/arch/um/kernel/time.c @@ -33,7 +33,7 @@ void timer(void) timeradd(&xtime, &local_offset, &xtime); } -void set_interval(int timer_type) +static void set_interval(int timer_type) { int usec = 1000000/hz(); struct itimerval interval = ((struct itimerval) { { 0, usec }, @@ -45,12 +45,14 @@ void set_interval(int timer_type) void enable_timer(void) { + set_interval(ITIMER_VIRTUAL); +} + +void prepare_timer(void * ptr) +{ int usec = 1000000/hz(); - struct itimerval enable = ((struct itimerval) { { 0, usec }, - { 0, usec }}); - if(setitimer(ITIMER_VIRTUAL, &enable, NULL)) - printk("enable_timer - setitimer failed, errno = %d\n", - errno); + *(struct itimerval *)ptr = ((struct itimerval) { { 0, usec }, + { 0, usec }}); } void disable_timer(void) @@ -155,13 +157,15 @@ void idle_sleep(int secs) nanosleep(&ts, NULL); } -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ +/* XXX This partly duplicates init_irq_signals */ + +void user_time_init(void) +{ + set_handler(SIGVTALRM, (__sighandler_t) alarm_handler, + SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH, + SIGALRM, SIGUSR2, -1); + set_handler(SIGALRM, (__sighandler_t) alarm_handler, + SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH, + SIGVTALRM, SIGUSR2, -1); + set_interval(ITIMER_VIRTUAL); +} diff --git a/arch/um/kernel/time_kern.c b/arch/um/kernel/time_kern.c index 6516fc52afe0..4e08f7545d63 100644 --- a/arch/um/kernel/time_kern.c +++ b/arch/um/kernel/time_kern.c @@ -137,7 +137,10 @@ long um_stime(int __user *tptr) void timer_handler(int sig, union uml_pt_regs *regs) { local_irq_disable(); - update_process_times(CHOOSE_MODE(user_context(UPT_SP(regs)), (regs)->skas.is_user)); + irq_enter(); + update_process_times(CHOOSE_MODE(user_context(UPT_SP(regs)), + (regs)->skas.is_user)); + irq_exit(); local_irq_enable(); if(current_thread->cpu == 0) timer_irq(regs); @@ -162,7 +165,7 @@ int __init timer_init(void) { int err; - CHOOSE_MODE(user_time_init_tt(), user_time_init_skas()); + user_time_init(); err = request_irq(TIMER_IRQ, um_timer, SA_INTERRUPT, "timer", NULL); if(err != 0) printk(KERN_ERR "timer_init : request_irq failed - " diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c index eda477edfdf5..83ec8d4747fd 100644 --- a/arch/um/kernel/tlb.c +++ b/arch/um/kernel/tlb.c @@ -18,13 +18,15 @@ #define ADD_ROUND(n, inc) (((n) + (inc)) & ~((inc) - 1)) void fix_range_common(struct mm_struct *mm, unsigned long start_addr, - unsigned long end_addr, int force, int data, - void (*do_ops)(int, struct host_vm_op *, int)) + unsigned long end_addr, int force, + void (*do_ops)(union mm_context *, struct host_vm_op *, + int)) { pgd_t *npgd; pud_t *npud; pmd_t *npmd; pte_t *npte; + union mm_context *mmu = &mm->context; unsigned long addr, end; int r, w, x; struct host_vm_op ops[16]; @@ -40,7 +42,7 @@ void fix_range_common(struct mm_struct *mm, unsigned long start_addr, end = end_addr; if(force || pgd_newpage(*npgd)){ op_index = add_munmap(addr, end - addr, ops, - op_index, last_op, data, + op_index, last_op, mmu, do_ops); pgd_mkuptodate(*npgd); } @@ -55,7 +57,7 @@ void fix_range_common(struct mm_struct *mm, unsigned long start_addr, end = end_addr; if(force || pud_newpage(*npud)){ op_index = add_munmap(addr, end - addr, ops, - op_index, last_op, data, + op_index, last_op, mmu, do_ops); pud_mkuptodate(*npud); } @@ -70,7 +72,7 @@ void fix_range_common(struct mm_struct *mm, unsigned long start_addr, end = end_addr; if(force || pmd_newpage(*npmd)){ op_index = add_munmap(addr, end - addr, ops, - op_index, last_op, data, + op_index, last_op, mmu, do_ops); pmd_mkuptodate(*npmd); } @@ -93,21 +95,21 @@ void fix_range_common(struct mm_struct *mm, unsigned long start_addr, op_index = add_mmap(addr, pte_val(*npte) & PAGE_MASK, PAGE_SIZE, r, w, x, ops, - op_index, last_op, data, + op_index, last_op, mmu, do_ops); else op_index = add_munmap(addr, PAGE_SIZE, ops, - op_index, last_op, data, + op_index, last_op, mmu, do_ops); } else if(pte_newprot(*npte)) op_index = add_mprotect(addr, PAGE_SIZE, r, w, x, ops, - op_index, last_op, data, + op_index, last_op, mmu, do_ops); *npte = pte_mkuptodate(*npte); addr += PAGE_SIZE; } - (*do_ops)(data, ops, op_index); + (*do_ops)(mmu, ops, op_index); } int flush_tlb_kernel_range_common(unsigned long start, unsigned long end) @@ -195,51 +197,6 @@ int flush_tlb_kernel_range_common(unsigned long start, unsigned long end) return(updated); } -void flush_tlb_page(struct vm_area_struct *vma, unsigned long address) -{ - address &= PAGE_MASK; - flush_tlb_range(vma, address, address + PAGE_SIZE); -} - -void flush_tlb_all(void) -{ - flush_tlb_mm(current->mm); -} - -void flush_tlb_kernel_range(unsigned long start, unsigned long end) -{ - CHOOSE_MODE_PROC(flush_tlb_kernel_range_tt, - flush_tlb_kernel_range_common, start, end); -} - -void flush_tlb_kernel_vm(void) -{ - CHOOSE_MODE(flush_tlb_kernel_vm_tt(), - flush_tlb_kernel_range_common(start_vm, end_vm)); -} - -void __flush_tlb_one(unsigned long addr) -{ - CHOOSE_MODE_PROC(__flush_tlb_one_tt, __flush_tlb_one_skas, addr); -} - -void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end) -{ - CHOOSE_MODE_PROC(flush_tlb_range_tt, flush_tlb_range_skas, vma, start, - end); -} - -void flush_tlb_mm(struct mm_struct *mm) -{ - CHOOSE_MODE_PROC(flush_tlb_mm_tt, flush_tlb_mm_skas, mm); -} - -void force_flush_all(void) -{ - CHOOSE_MODE(force_flush_all_tt(), force_flush_all_skas()); -} - pgd_t *pgd_offset_proc(struct mm_struct *mm, unsigned long address) { return(pgd_offset(mm, address)); @@ -270,9 +227,9 @@ pte_t *addr_pte(struct task_struct *task, unsigned long addr) } int add_mmap(unsigned long virt, unsigned long phys, unsigned long len, - int r, int w, int x, struct host_vm_op *ops, int index, - int last_filled, int data, - void (*do_ops)(int, struct host_vm_op *, int)) + int r, int w, int x, struct host_vm_op *ops, int index, + int last_filled, union mm_context *mmu, + void (*do_ops)(union mm_context *, struct host_vm_op *, int)) { __u64 offset; struct host_vm_op *last; @@ -292,7 +249,7 @@ int add_mmap(unsigned long virt, unsigned long phys, unsigned long len, } if(index == last_filled){ - (*do_ops)(data, ops, last_filled); + (*do_ops)(mmu, ops, last_filled); index = -1; } @@ -310,8 +267,8 @@ int add_mmap(unsigned long virt, unsigned long phys, unsigned long len, } int add_munmap(unsigned long addr, unsigned long len, struct host_vm_op *ops, - int index, int last_filled, int data, - void (*do_ops)(int, struct host_vm_op *, int)) + int index, int last_filled, union mm_context *mmu, + void (*do_ops)(union mm_context *, struct host_vm_op *, int)) { struct host_vm_op *last; @@ -325,7 +282,7 @@ int add_munmap(unsigned long addr, unsigned long len, struct host_vm_op *ops, } if(index == last_filled){ - (*do_ops)(data, ops, last_filled); + (*do_ops)(mmu, ops, last_filled); index = -1; } @@ -337,8 +294,9 @@ int add_munmap(unsigned long addr, unsigned long len, struct host_vm_op *ops, } int add_mprotect(unsigned long addr, unsigned long len, int r, int w, int x, - struct host_vm_op *ops, int index, int last_filled, int data, - void (*do_ops)(int, struct host_vm_op *, int)) + struct host_vm_op *ops, int index, int last_filled, + union mm_context *mmu, + void (*do_ops)(union mm_context *, struct host_vm_op *, int)) { struct host_vm_op *last; @@ -354,7 +312,7 @@ int add_mprotect(unsigned long addr, unsigned long len, int r, int w, int x, } if(index == last_filled){ - (*do_ops)(data, ops, last_filled); + (*do_ops)(mmu, ops, last_filled); index = -1; } @@ -367,3 +325,49 @@ int add_mprotect(unsigned long addr, unsigned long len, int r, int w, int x, .x = x } } }); return(index); } + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long address) +{ + address &= PAGE_MASK; + flush_tlb_range(vma, address, address + PAGE_SIZE); +} + +void flush_tlb_all(void) +{ + flush_tlb_mm(current->mm); +} + +void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + CHOOSE_MODE_PROC(flush_tlb_kernel_range_tt, + flush_tlb_kernel_range_common, start, end); +} + +void flush_tlb_kernel_vm(void) +{ + CHOOSE_MODE(flush_tlb_kernel_vm_tt(), + flush_tlb_kernel_range_common(start_vm, end_vm)); +} + +void __flush_tlb_one(unsigned long addr) +{ + CHOOSE_MODE_PROC(__flush_tlb_one_tt, __flush_tlb_one_skas, addr); +} + +void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + CHOOSE_MODE_PROC(flush_tlb_range_tt, flush_tlb_range_skas, vma, start, + end); +} + +void flush_tlb_mm(struct mm_struct *mm) +{ + CHOOSE_MODE_PROC(flush_tlb_mm_tt, flush_tlb_mm_skas, mm); +} + +void force_flush_all(void) +{ + CHOOSE_MODE(force_flush_all_tt(), force_flush_all_skas()); +} + diff --git a/arch/um/kernel/tt/Makefile b/arch/um/kernel/tt/Makefile index 3fd2554e60b6..6939e5af8472 100644 --- a/arch/um/kernel/tt/Makefile +++ b/arch/um/kernel/tt/Makefile @@ -4,11 +4,11 @@ # obj-y = exec_kern.o exec_user.o gdb.o ksyms.o mem.o mem_user.o process_kern.o \ - syscall_kern.o syscall_user.o time.o tlb.o tracer.o trap_user.o \ + syscall_kern.o syscall_user.o tlb.o tracer.o trap_user.o \ uaccess.o uaccess_user.o obj-$(CONFIG_PT_PROXY) += gdb_kern.o ptproxy/ -USER_OBJS := gdb.o time.o tracer.o +USER_OBJS := gdb.o tracer.o include arch/um/scripts/Makefile.rules diff --git a/arch/um/kernel/tt/gdb.c b/arch/um/kernel/tt/gdb.c index 19a0ad7b35b3..37e22d71a0d9 100644 --- a/arch/um/kernel/tt/gdb.c +++ b/arch/um/kernel/tt/gdb.c @@ -153,10 +153,10 @@ void remove_gdb_cb(void *unused) exit_debugger_cb(NULL); } -int gdb_remove(char *unused) +int gdb_remove(int unused) { initial_thread_cb(remove_gdb_cb, NULL); - return(0); + return 0; } void signal_usr1(int sig) diff --git a/arch/um/kernel/tt/gdb_kern.c b/arch/um/kernel/tt/gdb_kern.c index 93fb121f86af..26506388a6aa 100644 --- a/arch/um/kernel/tt/gdb_kern.c +++ b/arch/um/kernel/tt/gdb_kern.c @@ -10,7 +10,7 @@ #ifdef CONFIG_MCONSOLE extern int gdb_config(char *str); -extern int gdb_remove(char *unused); +extern int gdb_remove(int n); static struct mc_device gdb_mc = { .name = "gdb", diff --git a/arch/um/kernel/tt/include/debug.h b/arch/um/kernel/tt/include/debug.h index 8eff674107ca..738435461e13 100644 --- a/arch/um/kernel/tt/include/debug.h +++ b/arch/um/kernel/tt/include/debug.h @@ -4,8 +4,8 @@ * Licensed under the GPL */ -#ifndef __DEBUG_H -#define __DEBUG_H +#ifndef __UML_TT_DEBUG_H +#define __UML_TT_DEBUG_H extern int debugger_proxy(int status, pid_t pid); extern void child_proxy(pid_t pid, int status); @@ -13,17 +13,6 @@ extern void init_proxy (pid_t pid, int waiting, int status); extern int start_debugger(char *prog, int startup, int stop, int *debugger_fd); extern void fake_child_exit(void); extern int gdb_config(char *str); -extern int gdb_remove(char *unused); +extern int gdb_remove(int unused); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/tt/include/mode-tt.h b/arch/um/kernel/tt/include/mode-tt.h index efe462019069..e171e15fead5 100644 --- a/arch/um/kernel/tt/include/mode-tt.h +++ b/arch/um/kernel/tt/include/mode-tt.h @@ -13,7 +13,6 @@ enum { OP_NONE, OP_EXEC, OP_FORK, OP_TRACE_ON, OP_REBOOT, OP_HALT, OP_CB }; extern int tracing_pid; extern int tracer(int (*init_proc)(void *), void *sp); -extern void user_time_init_tt(void); extern void sig_handler_common_tt(int sig, void *sc); extern void syscall_handler_tt(int sig, union uml_pt_regs *regs); extern void reboot_tt(void); diff --git a/arch/um/kernel/tt/process_kern.c b/arch/um/kernel/tt/process_kern.c index 776310fd5b8b..a189a2b92935 100644 --- a/arch/um/kernel/tt/process_kern.c +++ b/arch/um/kernel/tt/process_kern.c @@ -266,10 +266,10 @@ int copy_thread_tt(int nr, unsigned long clone_flags, unsigned long sp, } if(current->thread.forking){ - sc_to_sc(UPT_SC(&p->thread.regs.regs), - UPT_SC(¤t->thread.regs.regs)); + sc_to_sc(UPT_SC(&p->thread.regs.regs), UPT_SC(®s->regs)); SC_SET_SYSCALL_RETURN(UPT_SC(&p->thread.regs.regs), 0); - if(sp != 0) SC_SP(UPT_SC(&p->thread.regs.regs)) = sp; + if(sp != 0) + SC_SP(UPT_SC(&p->thread.regs.regs)) = sp; } p->thread.mode.tt.extern_pid = new_pid; @@ -459,14 +459,3 @@ int is_valid_pid(int pid) read_unlock(&tasklist_lock); return(0); } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/tt/time.c b/arch/um/kernel/tt/time.c deleted file mode 100644 index 8565b71b07cd..000000000000 --- a/arch/um/kernel/tt/time.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include <signal.h> -#include <sys/time.h> -#include <time_user.h> -#include "process.h" -#include "user.h" - -void user_time_init_tt(void) -{ - if(signal(SIGVTALRM, (__sighandler_t) alarm_handler) == SIG_ERR) - panic("Couldn't set SIGVTALRM handler"); - set_interval(ITIMER_VIRTUAL); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/tt/tlb.c b/arch/um/kernel/tt/tlb.c index 203216ad86f1..2eefb43bc9c2 100644 --- a/arch/um/kernel/tt/tlb.c +++ b/arch/um/kernel/tt/tlb.c @@ -17,7 +17,7 @@ #include "os.h" #include "tlb.h" -static void do_ops(int unused, struct host_vm_op *ops, int last) +static void do_ops(union mm_context *mmu, struct host_vm_op *ops, int last) { struct host_vm_op *op; int i; @@ -55,7 +55,7 @@ static void fix_range(struct mm_struct *mm, unsigned long start_addr, panic("fix_range fixing wrong address space, current = 0x%p", current); - fix_range_common(mm, start_addr, end_addr, force, 0, do_ops); + fix_range_common(mm, start_addr, end_addr, force, do_ops); } atomic_t vmchange_seq = ATOMIC_INIT(1); diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 8736d098f0ee..ca2bb6f09a7d 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -38,6 +38,9 @@ #include "choose-mode.h" #include "mode_kern.h" #include "mode.h" +#ifdef UML_CONFIG_MODE_SKAS +#include "skas.h" +#endif #define DEFAULT_COMMAND_LINE "root=98:0" @@ -318,6 +321,7 @@ int linux_main(int argc, char **argv) unsigned long avail, diff; unsigned long virtmem_size, max_physmem; unsigned int i, add; + char * mode; for (i = 1; i < argc; i++){ if((i == 1) && (argv[i][0] == ' ')) continue; @@ -338,6 +342,21 @@ int linux_main(int argc, char **argv) exit(1); } #endif + +#ifndef CONFIG_MODE_SKAS + mode = "TT"; +#else + /* Show to the user the result of selection */ + if (mode_tt) + mode = "TT"; + else if (proc_mm && ptrace_faultinfo) + mode = "SKAS3"; + else + mode = "SKAS0"; +#endif + + printf("UML running in %s mode\n", mode); + uml_start = CHOOSE_MODE_PROC(set_task_sizes_tt, set_task_sizes_skas, 0, &host_task_size, &task_size); diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S index 61dfd4fef752..b03326d391c9 100644 --- a/arch/um/kernel/uml.lds.S +++ b/arch/um/kernel/uml.lds.S @@ -16,8 +16,8 @@ SECTIONS __binary_start = .; #ifdef MODE_TT - .remap_data : { arch/um/sys-SUBARCH/unmap_fin.o (.data .bss) } - .remap : { arch/um/sys-SUBARCH/unmap_fin.o (.text) } + .remap_data : { UNMAP_PATH (.data .bss) } + .remap : { UNMAP_PATH (.text) } . = ALIGN(4096); /* Init code and data */ #endif @@ -30,6 +30,7 @@ SECTIONS _einittext = .; } . = ALIGN(4096); + .text : { *(.text) @@ -39,6 +40,12 @@ SECTIONS /* .gnu.warning sections are handled specially by elf32.em. */ *(.gnu.warning) *(.gnu.linkonce.t*) + + . = ALIGN(4096); + __syscall_stub_start = .; + *(.__syscall_stub*) + __syscall_stub_end = .; + . = ALIGN(4096); } #include "asm/common.lds.S" diff --git a/arch/um/os-Linux/elf_aux.c b/arch/um/os-Linux/elf_aux.c index f0d6060e3e57..9416e1c29926 100644 --- a/arch/um/os-Linux/elf_aux.c +++ b/arch/um/os-Linux/elf_aux.c @@ -9,8 +9,10 @@ */ #include <elf.h> #include <stddef.h> +#include <asm/elf.h> #include "init.h" #include "elf_user.h" +#include "mem_user.h" #if ELF_CLASS == ELFCLASS32 typedef Elf32_auxv_t elf_auxv_t; @@ -40,6 +42,9 @@ __init void scan_elf_aux( char **envp) break; case AT_SYSINFO_EHDR: vsyscall_ehdr = auxv->a_un.a_val; + /* See if the page is under TASK_SIZE */ + if (vsyscall_ehdr < (unsigned long) envp) + vsyscall_ehdr = 0; break; case AT_HWCAP: elf_aux_hwcap = auxv->a_un.a_val; diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c index 9a0ad094d926..3125d320722c 100644 --- a/arch/um/os-Linux/sys-i386/registers.c +++ b/arch/um/os-Linux/sys-i386/registers.c @@ -121,6 +121,11 @@ void init_registers(int pid) err); } +void get_safe_registers(unsigned long *regs) +{ + memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long)); +} + /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically diff --git a/arch/um/os-Linux/sys-x86_64/registers.c b/arch/um/os-Linux/sys-x86_64/registers.c index 6286c974bbeb..44438d15c3d6 100644 --- a/arch/um/os-Linux/sys-x86_64/registers.c +++ b/arch/um/os-Linux/sys-x86_64/registers.c @@ -69,6 +69,11 @@ void init_registers(int pid) err); } +void get_safe_registers(unsigned long *regs) +{ + memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long)); +} + /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c index 75d7af9ae1d2..56d3f870926b 100644 --- a/arch/um/os-Linux/user_syms.c +++ b/arch/um/os-Linux/user_syms.c @@ -83,6 +83,9 @@ EXPORT_SYMBOL_PROTO(statfs64); EXPORT_SYMBOL_PROTO(getuid); +EXPORT_SYMBOL_PROTO(fsync); +EXPORT_SYMBOL_PROTO(fdatasync); + /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules index 7459d09c233e..17f305b6bade 100644 --- a/arch/um/scripts/Makefile.rules +++ b/arch/um/scripts/Makefile.rules @@ -16,6 +16,11 @@ define unprofile endef +# The stubs and unmap.o can't try to call mcount or update basic block data +define unprofile + $(patsubst -pg,,$(patsubst -fprofile-arcs -ftest-coverage,,$(1))) +endef + quiet_cmd_make_link = SYMLINK $@ cmd_make_link = ln -sf $(srctree)/arch/$(SUBARCH)/$($(notdir $@)-dir)/$(notdir $@) $@ diff --git a/arch/um/scripts/Makefile.unmap b/arch/um/scripts/Makefile.unmap index 37a8f9765295..802d027a1e13 100644 --- a/arch/um/scripts/Makefile.unmap +++ b/arch/um/scripts/Makefile.unmap @@ -12,8 +12,8 @@ $(obj)/unmap.o: _c_flags = $(call unprofile,$(CFLAGS)) quiet_cmd_wrapld = LD $@ define cmd_wrapld - $(LD) -r -o $(obj)/unmap_tmp.o $< $(shell $(CC) -print-file-name=libc.a); \ - $(OBJCOPY) $(obj)/unmap_tmp.o $@ -G switcheroo + $(LD) $(LDFLAGS) -r -o $(obj)/unmap_tmp.o $< $(shell $(CC) $(CFLAGS) -print-file-name=libc.a); \ + $(OBJCOPY) $(UML_OBJCOPYFLAGS) $(obj)/unmap_tmp.o $@ -G switcheroo endef $(obj)/unmap_fin.o : $(obj)/unmap.o FORCE diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile index 095bcdb0b9cc..77c3c4d29f55 100644 --- a/arch/um/sys-i386/Makefile +++ b/arch/um/sys-i386/Makefile @@ -1,6 +1,6 @@ obj-y = bitops.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \ - ptrace_user.o semaphore.o signal.o sigcontext.o syscalls.o sysrq.o \ - sys_call_table.o + ptrace_user.o semaphore.o signal.o sigcontext.o stub.o stub_segv.o \ + syscalls.o sysrq.o sys_call_table.o obj-$(CONFIG_HIGHMEM) += highmem.o obj-$(CONFIG_MODULES) += module.o @@ -16,6 +16,14 @@ semaphore.c-dir = kernel highmem.c-dir = mm module.c-dir = kernel +STUB_CFLAGS = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS)) + +# _cflags works with kernel files, not with userspace ones, but c_flags does, +# why ask why? +$(obj)/stub_segv.o : c_flags = $(STUB_CFLAGS) + +$(obj)/stub.o : a_flags = $(STUB_CFLAGS) + subdir- := util include arch/um/scripts/Makefile.unmap diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c index dc755b0b9db8..bd3c34aa52e5 100644 --- a/arch/um/sys-i386/ldt.c +++ b/arch/um/sys-i386/ldt.c @@ -4,96 +4,106 @@ */ #include "linux/config.h" +#include "linux/sched.h" #include "linux/slab.h" +#include "linux/types.h" #include "asm/uaccess.h" #include "asm/ptrace.h" +#include "asm/smp.h" +#include "asm/ldt.h" #include "choose-mode.h" #include "kern.h" +#include "mode_kern.h" #ifdef CONFIG_MODE_TT -extern int modify_ldt(int func, void *ptr, unsigned long bytecount); -/* XXX this needs copy_to_user and copy_from_user */ +extern int modify_ldt(int func, void *ptr, unsigned long bytecount); -int sys_modify_ldt_tt(int func, void __user *ptr, unsigned long bytecount) +static int do_modify_ldt_tt(int func, void *ptr, unsigned long bytecount) { - if (!access_ok(VERIFY_READ, ptr, bytecount)) - return -EFAULT; - return modify_ldt(func, ptr, bytecount); } + #endif #ifdef CONFIG_MODE_SKAS -extern int userspace_pid[]; +#include "skas.h" #include "skas_ptrace.h" -int sys_modify_ldt_skas(int func, void __user *ptr, unsigned long bytecount) +static int do_modify_ldt_skas(int func, void *ptr, unsigned long bytecount) { struct ptrace_ldt ldt; - void *buf; - int res, n; + u32 cpu; + int res; - buf = kmalloc(bytecount, GFP_KERNEL); - if(buf == NULL) - return(-ENOMEM); + ldt = ((struct ptrace_ldt) { .func = func, + .ptr = ptr, + .bytecount = bytecount }); - res = 0; + cpu = get_cpu(); + res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0, (unsigned long) &ldt); + put_cpu(); + + return res; +} +#endif + +int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) +{ + struct user_desc info; + int res = 0; + void *buf = NULL; + void *p = NULL; /* What we pass to host. */ switch(func){ case 1: - case 0x11: - res = copy_from_user(buf, ptr, bytecount); - break; - } + case 0x11: /* write_ldt */ + /* Do this check now to avoid overflows. */ + if (bytecount != sizeof(struct user_desc)) { + res = -EINVAL; + goto out; + } + + if(copy_from_user(&info, ptr, sizeof(info))) { + res = -EFAULT; + goto out; + } - if(res != 0){ - res = -EFAULT; + p = &info; + break; + case 0: + case 2: /* read_ldt */ + + /* The use of info avoids kmalloc on the write case, not on the + * read one. */ + buf = kmalloc(bytecount, GFP_KERNEL); + if (!buf) { + res = -ENOMEM; + goto out; + } + p = buf; + default: + res = -ENOSYS; goto out; } - ldt = ((struct ptrace_ldt) { .func = func, - .ptr = buf, - .bytecount = bytecount }); -#warning Need to look up userspace_pid by cpu - res = ptrace(PTRACE_LDT, userspace_pid[0], 0, (unsigned long) &ldt); + res = CHOOSE_MODE_PROC(do_modify_ldt_tt, do_modify_ldt_skas, func, + p, bytecount); if(res < 0) goto out; switch(func){ case 0: case 2: - n = res; - res = copy_to_user(ptr, buf, n); - if(res != 0) + /* Modify_ldt was for reading and returned the number of read + * bytes.*/ + if(copy_to_user(ptr, p, res)) res = -EFAULT; - else - res = n; break; } - out: +out: kfree(buf); - return(res); -} -#endif - -int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) -{ - return(CHOOSE_MODE_PROC(sys_modify_ldt_tt, sys_modify_ldt_skas, func, - ptr, bytecount)); + return res; } - - - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/sys-i386/signal.c b/arch/um/sys-i386/signal.c index 03913ca5d256..4efc69a039d7 100644 --- a/arch/um/sys-i386/signal.c +++ b/arch/um/sys-i386/signal.c @@ -312,7 +312,7 @@ long sys_sigreturn(struct pt_regs regs) unsigned long __user *extramask = frame->extramask; int sig_size = (_NSIG_WORDS - 1) * sizeof(unsigned long); - if(copy_from_user(&set.sig[0], oldmask, sizeof(&set.sig[0])) || + if(copy_from_user(&set.sig[0], oldmask, sizeof(set.sig[0])) || copy_from_user(&set.sig[1], extramask, sig_size)) goto segfault; diff --git a/arch/um/sys-i386/stub.S b/arch/um/sys-i386/stub.S new file mode 100644 index 000000000000..2f2c70a8f043 --- /dev/null +++ b/arch/um/sys-i386/stub.S @@ -0,0 +1,8 @@ +#include "uml-config.h" + + .globl syscall_stub +.section .__syscall_stub, "x" +syscall_stub: + int $0x80 + mov %eax, UML_CONFIG_STUB_DATA + int3 diff --git a/arch/um/sys-i386/stub_segv.c b/arch/um/sys-i386/stub_segv.c new file mode 100644 index 000000000000..68aeabe3a654 --- /dev/null +++ b/arch/um/sys-i386/stub_segv.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com) + * Licensed under the GPL + */ + +#include <signal.h> +#include <asm/sigcontext.h> +#include <asm/unistd.h> +#include "uml-config.h" +#include "sysdep/sigcontext.h" +#include "sysdep/faultinfo.h" + +void __attribute__ ((__section__ (".__syscall_stub"))) +stub_segv_handler(int sig) +{ + struct sigcontext *sc = (struct sigcontext *) (&sig + 1); + + GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA), + sc); + + __asm__("movl %0, %%eax ; int $0x80": : "g" (__NR_getpid)); + __asm__("movl %%eax, %%ebx ; movl %0, %%eax ; movl %1, %%ecx ;" + "int $0x80": : "g" (__NR_kill), "g" (SIGUSR1)); + /* Load pointer to sigcontext into esp, since we need to leave + * the stack in its original form when we do the sigreturn here, by + * hand. + */ + __asm__("mov %0,%%esp ; movl %1, %%eax ; " + "int $0x80" : : "a" (sc), "g" (__NR_sigreturn)); +} diff --git a/arch/um/sys-i386/syscalls.c b/arch/um/sys-i386/syscalls.c index 335e2d89504d..83e9be820a86 100644 --- a/arch/um/sys-i386/syscalls.c +++ b/arch/um/sys-i386/syscalls.c @@ -69,15 +69,11 @@ long sys_clone(unsigned long clone_flags, unsigned long newsp, { long ret; - /* XXX: normal arch do here this pass, and also pass the regs to - * do_fork, instead of NULL. Currently the arch-independent code - * ignores these values, while the UML code (actually it's - * copy_thread) does the right thing. But this should change, - probably. */ - /*if (!newsp) - newsp = UPT_SP(current->thread.regs);*/ + if (!newsp) + newsp = UPT_SP(¤t->thread.regs.regs); current->thread.forking = 1; - ret = do_fork(clone_flags, newsp, NULL, 0, parent_tid, child_tid); + ret = do_fork(clone_flags, newsp, ¤t->thread.regs, 0, parent_tid, + child_tid); current->thread.forking = 0; return(ret); } @@ -197,14 +193,3 @@ long sys_sigaction(int sig, const struct old_sigaction __user *act, return ret; } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/sys-i386/unmap.c b/arch/um/sys-i386/unmap.c index 136875263d27..1b0ad0e4adcd 100644 --- a/arch/um/sys-i386/unmap.c +++ b/arch/um/sys-i386/unmap.c @@ -15,7 +15,7 @@ int switcheroo(int fd, int prot, void *from, void *to, int size) if(munmap(to, size) < 0){ return(-1); } - if(mmap2(to, size, prot, MAP_SHARED | MAP_FIXED, fd, 0) != to){ + if(mmap2(to, size, prot, MAP_SHARED | MAP_FIXED, fd, 0) == (void*) -1 ){ return(-1); } if(munmap(from, size) < 0){ diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile index 2bc6f6849010..7488206ce6f4 100644 --- a/arch/um/sys-x86_64/Makefile +++ b/arch/um/sys-x86_64/Makefile @@ -6,8 +6,8 @@ #XXX: why into lib-y? lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o mem.o memcpy.o \ - ptrace.o ptrace_user.o semaphore.o sigcontext.o signal.o \ - syscalls.o sysrq.o thunk.o syscall_table.o + ptrace.o ptrace_user.o semaphore.o sigcontext.o signal.o stub.o \ + stub_segv.o syscalls.o syscall_table.o sysrq.o thunk.o obj-y := ksyms.o obj-$(CONFIG_MODULES) += module.o um_module.o @@ -28,6 +28,14 @@ semaphore.c-dir = kernel thunk.S-dir = lib module.c-dir = kernel +STUB_CFLAGS = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS)) + +# _cflags works with kernel files, not with userspace ones, but c_flags does, +# why ask why? +$(obj)/stub_segv.o : c_flags = $(STUB_CFLAGS) + +$(obj)/stub.o : a_flags = $(STUB_CFLAGS) + subdir- := util include arch/um/scripts/Makefile.unmap diff --git a/arch/um/sys-x86_64/signal.c b/arch/um/sys-x86_64/signal.c index 73a7926f7370..8fdaed06c10d 100644 --- a/arch/um/sys-x86_64/signal.c +++ b/arch/um/sys-x86_64/signal.c @@ -168,7 +168,7 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, frame = (struct rt_sigframe __user *) round_down(stack_top - sizeof(struct rt_sigframe), 16) - 8; - ((unsigned char *) frame) -= 128; + frame = (struct rt_sigframe *) ((unsigned long) frame - 128); if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate))) goto out; diff --git a/arch/um/sys-x86_64/stub.S b/arch/um/sys-x86_64/stub.S new file mode 100644 index 000000000000..31c14925716b --- /dev/null +++ b/arch/um/sys-x86_64/stub.S @@ -0,0 +1,15 @@ +#include "uml-config.h" + + .globl syscall_stub +.section .__syscall_stub, "x" +syscall_stub: + syscall + /* We don't have 64-bit constants, so this constructs the address + * we need. + */ + movq $(UML_CONFIG_STUB_DATA >> 32), %rbx + salq $32, %rbx + movq $(UML_CONFIG_STUB_DATA & 0xffffffff), %rcx + or %rcx, %rbx + movq %rax, (%rbx) + int3 diff --git a/arch/um/sys-x86_64/stub_segv.c b/arch/um/sys-x86_64/stub_segv.c new file mode 100644 index 000000000000..161d1fe9c034 --- /dev/null +++ b/arch/um/sys-x86_64/stub_segv.c @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com) + * Licensed under the GPL + */ + +#include <signal.h> +#include <linux/compiler.h> +#include <asm/unistd.h> +#include "uml-config.h" +#include "sysdep/sigcontext.h" +#include "sysdep/faultinfo.h" + +void __attribute__ ((__section__ (".__syscall_stub"))) +stub_segv_handler(int sig) +{ + struct ucontext *uc; + + __asm__("movq %%rdx, %0" : "=g" (uc) :); + GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA), + &uc->uc_mcontext); + + __asm__("movq %0, %%rax ; syscall": : "g" (__NR_getpid)); + __asm__("movq %%rax, %%rdi ; movq %0, %%rax ; movq %1, %%rsi ;" + "syscall": : "g" (__NR_kill), "g" (SIGUSR1)); + /* Two popqs to restore the stack to the state just before entering + * the handler, one pops the return address, the other pops the frame + * pointer. + */ + __asm__("popq %%rax ; popq %%rax ; movq %0, %%rax ; syscall" : : "g" + (__NR_rt_sigreturn)); +} diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c index 6f44f40204ed..3259a4db4534 100644 --- a/arch/um/sys-x86_64/syscalls.c +++ b/arch/um/sys-x86_64/syscalls.c @@ -174,26 +174,11 @@ long sys_clone(unsigned long clone_flags, unsigned long newsp, { long ret; - /* XXX: normal arch do here this pass, and also pass the regs to - * do_fork, instead of NULL. Currently the arch-independent code - * ignores these values, while the UML code (actually it's - * copy_thread) does the right thing. But this should change, - probably. */ - /*if (!newsp) - newsp = UPT_SP(current->thread.regs);*/ + if (!newsp) + newsp = UPT_SP(¤t->thread.regs.regs); current->thread.forking = 1; - ret = do_fork(clone_flags, newsp, NULL, 0, parent_tid, child_tid); + ret = do_fork(clone_flags, newsp, ¤t->thread.regs, 0, parent_tid, + child_tid); current->thread.forking = 0; return(ret); } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/sys-x86_64/unmap.c b/arch/um/sys-x86_64/unmap.c index bc7094cce47e..f4a4bffd8a18 100644 --- a/arch/um/sys-x86_64/unmap.c +++ b/arch/um/sys-x86_64/unmap.c @@ -15,7 +15,7 @@ int switcheroo(int fd, int prot, void *from, void *to, int size) if(munmap(to, size) < 0){ return(-1); } - if(mmap(to, size, prot, MAP_SHARED | MAP_FIXED, fd, 0) != to){ + if(mmap(to, size, prot, MAP_SHARED | MAP_FIXED, fd, 0) == (void*) -1){ return(-1); } if(munmap(from, size) < 0){ diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig index 90cd4baa75ee..89c053b6c2c4 100644 --- a/arch/v850/Kconfig +++ b/arch/v850/Kconfig @@ -218,6 +218,8 @@ menu "Processor type and features" a lot of RAM, and you need to able to allocate very large contiguous chunks. If unsure, say N. +source "mm/Kconfig" + endmenu @@ -248,6 +250,8 @@ source "fs/Kconfig.binfmt" endmenu +source "net/Kconfig" + ############################################################################# source "drivers/base/Kconfig" @@ -281,7 +285,7 @@ source "drivers/ieee1394/Kconfig" source "drivers/message/i2o/Kconfig" -source "net/Kconfig" +source "drivers/net/Kconfig" source "drivers/isdn/Kconfig" diff --git a/arch/v850/Makefile b/arch/v850/Makefile index 6edaed4a310e..bf38ca0ad781 100644 --- a/arch/v850/Makefile +++ b/arch/v850/Makefile @@ -1,8 +1,8 @@ # # arch/v850/Makefile # -# Copyright (C) 2001,02,03 NEC Corporation -# Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> +# Copyright (C) 2001,02,03,05 NEC Corporation +# Copyright (C) 2001,02,03,05 Miles Bader <miles@gnu.org> # # This file is included by the global makefile so that you can add your own # architecture-specific flags and dependencies. Remember to do have actions @@ -22,6 +22,9 @@ CFLAGS += -ffixed-r16 -mno-prolog-function CFLAGS += -fno-builtin CFLAGS += -D__linux__ -DUTS_SYSNAME=\"uClinux\" +# By default, build a kernel that runs on the gdb v850 simulator. +KBUILD_DEFCONFIG := sim_defconfig + # This prevents the linker from consolidating the .gnu.linkonce.this_module # section into .text (which the v850 default linker script for -r does for # some reason) diff --git a/arch/v850/README b/arch/v850/README index 01b98e290d4a..12f7f7a665e0 100644 --- a/arch/v850/README +++ b/arch/v850/README @@ -1,31 +1,43 @@ This port to the NEC V850E processor supports the following platforms: - + The gdb v850e simulator (CONFIG_V850E_SIM). - - + The Midas labs RTE-V850E/MA1-CB and RTE-V850E/NB85E-CB evaluation boards - (CONFIG_RTE_CB_MA1 and CONFIG_RTE_CB_NB85E). This support has only been - tested when running with the Multi-debugger monitor ROM (for the Green - Hills Multi debugger). The optional NEC Solution Gear RTE-MOTHER-A - motherboard is also supported, which allows PCI boards to be used - (CONFIG_RTE_MB_A_PCI). - - + The Midas labs RTE-V850E/ME2-CB evaluation board (CONFIG_RTE_CB_ME2). - This has only been tested using a kernel downloaded via an ICE connection - using the Multi debugger. Support for the RTE-MOTHER-A is present, but - hasn't been tested (unlike the other Midas labs cpu boards, the - RTE-V850E/ME2-CB includes an ethernet adaptor). - - + The NEC AS85EP1 V850E evaluation chip/board (CONFIG_V850E_AS85EP1). - - + The NEC `Anna' (board/chip) implementation of the V850E2 processor - (CONFIG_V850E2_ANNA). - - + The sim85e2c and sim85e2s simulators, which are verilog simulations of - the V850E2 NA85E2C/NA85E2S cpu cores (CONFIG_V850E2_SIM85E2C and - CONFIG_V850E2_SIM85E2S). - - + A FPGA implementation of the V850E2 NA85E2C cpu core - (CONFIG_V850E2_FPGA85E2C). + "sim" + The gdb v850e simulator (CONFIG_V850E_SIM). + + "rte-ma1-cb" + The Midas labs RTE-V850E/MA1-CB and RTE-V850E/NB85E-CB evaluation + boards (CONFIG_RTE_CB_MA1 and CONFIG_RTE_CB_NB85E). This support + has only been tested when running with the Multi-debugger monitor + ROM (for the Green Hills Multi debugger). The optional NEC + Solution Gear RTE-MOTHER-A motherboard is also supported, which + allows PCI boards to be used (CONFIG_RTE_MB_A_PCI). + + "rte-me2-cb" + The Midas labs RTE-V850E/ME2-CB evaluation board (CONFIG_RTE_CB_ME2). + This has only been tested using a kernel downloaded via an ICE + connection using the Multi debugger. Support for the RTE-MOTHER-A is + present, but hasn't been tested (unlike the other Midas labs cpu + boards, the RTE-V850E/ME2-CB includes an ethernet adaptor). + + "as85ep1" + The NEC AS85EP1 V850E evaluation chip/board (CONFIG_V850E_AS85EP1). + + "anna" + The NEC `Anna' (board/chip) implementation of the V850E2 processor + (CONFIG_V850E2_ANNA). + + "sim85e2c", "sim85e2s" + The sim85e2c and sim85e2s simulators, which are verilog simulations + of the V850E2 NA85E2C/NA85E2S cpu cores (CONFIG_V850E2_SIM85E2C and + CONFIG_V850E2_SIM85E2S). + + "fpga85e2c" + A FPGA implementation of the V850E2 NA85E2C cpu core + (CONFIG_V850E2_FPGA85E2C). + +To get a default kernel configuration for a particular platform, you can +use a <platform>_defconfig make target (e.g., "make rte-me2-cb_defconfig"); +to see which default configurations are possible, look in the directory +"arch/v850/configs". Porting to anything with a V850E/MA1 or MA2 processor should be simple. See the file <asm-v850/machdep.h> and the files it includes for an example of diff --git a/arch/v850/configs/rte-ma1-cb_defconfig b/arch/v850/configs/rte-ma1-cb_defconfig new file mode 100644 index 000000000000..1b5ca3c3a658 --- /dev/null +++ b/arch/v850/configs/rte-ma1-cb_defconfig @@ -0,0 +1,605 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-uc0 +# Thu Jul 21 11:08:27 2005 +# +# CONFIG_MMU is not set +# CONFIG_UID16 is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_ISA is not set +# CONFIG_ISAPNP is not set +# CONFIG_EISA is not set +# CONFIG_MCA is not set +CONFIG_V850=y + +# +# Processor type and features +# +# CONFIG_V850E_SIM is not set +CONFIG_RTE_CB_MA1=y +# CONFIG_RTE_CB_NB85E is not set +# CONFIG_RTE_CB_ME2 is not set +# CONFIG_V850E_AS85EP1 is not set +# CONFIG_V850E2_SIM85E2C is not set +# CONFIG_V850E2_SIM85E2S is not set +# CONFIG_V850E2_FPGA85E2C is not set +# CONFIG_V850E2_ANNA is not set +CONFIG_V850E=y +CONFIG_V850E_MA1=y +CONFIG_RTE_CB=y +CONFIG_RTE_CB_MULTI=y +CONFIG_RTE_CB_MULTI_DBTRAP=y +# CONFIG_RTE_CB_MA1_KSRAM is not set +CONFIG_RTE_MB_A_PCI=y +CONFIG_RTE_GBUS_INT=y +CONFIG_PCI=y +CONFIG_V850E_INTC=y +CONFIG_V850E_TIMER_D=y +# CONFIG_V850E_CACHE is not set +# CONFIG_V850E2_CACHE is not set +CONFIG_NO_CACHE=y +CONFIG_ZERO_BSS=y +# CONFIG_V850E_HIGHRES_TIMER is not set +# CONFIG_RESET_GUARD is not set +CONFIG_LARGE_ALLOCS=y + +# +# Code maturity level options +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_SYSCTL is not set +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI_LEGACY_PROC is not set +# CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_FLAT=y +# CONFIG_BINFMT_ZFLAT is not set +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +CONFIG_MTD_SLRAM=y +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Disk device support +# + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_SMC is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NE2000 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_DGRS is not set +CONFIG_EEPRO100=y +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_V850E_UART=y +CONFIG_V850E_UART_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_HFSPLUS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_SUNRPC=y +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_NO_KERNEL_MSG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set diff --git a/arch/v850/configs/rte-me2-cb_defconfig b/arch/v850/configs/rte-me2-cb_defconfig new file mode 100644 index 000000000000..44becc065404 --- /dev/null +++ b/arch/v850/configs/rte-me2-cb_defconfig @@ -0,0 +1,453 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-uc0 +# Thu Jul 21 11:30:08 2005 +# +# CONFIG_MMU is not set +# CONFIG_UID16 is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_ISA is not set +# CONFIG_ISAPNP is not set +# CONFIG_EISA is not set +# CONFIG_MCA is not set +CONFIG_V850=y + +# +# Processor type and features +# +# CONFIG_V850E_SIM is not set +# CONFIG_RTE_CB_MA1 is not set +# CONFIG_RTE_CB_NB85E is not set +CONFIG_RTE_CB_ME2=y +# CONFIG_V850E_AS85EP1 is not set +# CONFIG_V850E2_SIM85E2C is not set +# CONFIG_V850E2_SIM85E2S is not set +# CONFIG_V850E2_FPGA85E2C is not set +# CONFIG_V850E2_ANNA is not set +CONFIG_V850E=y +CONFIG_V850E_ME2=y +CONFIG_RTE_CB=y +# CONFIG_RTE_MB_A_PCI is not set +# CONFIG_PCI is not set +CONFIG_V850E_INTC=y +CONFIG_V850E_TIMER_D=y +CONFIG_V850E_CACHE=y +# CONFIG_V850E2_CACHE is not set +# CONFIG_NO_CACHE is not set +# CONFIG_ROM_KERNEL is not set +CONFIG_ZERO_BSS=y +# CONFIG_V850E_HIGHRES_TIMER is not set +# CONFIG_RESET_GUARD is not set +CONFIG_LARGE_ALLOCS=y + +# +# Code maturity level options +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_SYSCTL is not set +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_FLAT=y +# CONFIG_BINFMT_ZFLAT is not set +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_SLRAM=y +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set + +# +# Disk device support +# + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Networking support +# +# CONFIG_NET is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_V850E_UART is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_HFSPLUS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_NO_KERNEL_MSG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set diff --git a/arch/v850/configs/sim_defconfig b/arch/v850/configs/sim_defconfig new file mode 100644 index 000000000000..d73f5f9d8383 --- /dev/null +++ b/arch/v850/configs/sim_defconfig @@ -0,0 +1,442 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-uc0 +# Thu Jul 21 11:29:27 2005 +# +# CONFIG_MMU is not set +# CONFIG_UID16 is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_ISA is not set +# CONFIG_ISAPNP is not set +# CONFIG_EISA is not set +# CONFIG_MCA is not set +CONFIG_V850=y + +# +# Processor type and features +# +CONFIG_V850E_SIM=y +# CONFIG_RTE_CB_MA1 is not set +# CONFIG_RTE_CB_NB85E is not set +# CONFIG_RTE_CB_ME2 is not set +# CONFIG_V850E_AS85EP1 is not set +# CONFIG_V850E2_SIM85E2C is not set +# CONFIG_V850E2_SIM85E2S is not set +# CONFIG_V850E2_FPGA85E2C is not set +# CONFIG_V850E2_ANNA is not set +CONFIG_V850E=y +# CONFIG_PCI is not set +# CONFIG_V850E_INTC is not set +# CONFIG_V850E_TIMER_D is not set +# CONFIG_V850E_CACHE is not set +# CONFIG_V850E2_CACHE is not set +CONFIG_NO_CACHE=y +CONFIG_ZERO_BSS=y +# CONFIG_RESET_GUARD is not set +CONFIG_LARGE_ALLOCS=y + +# +# Code maturity level options +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_SYSCTL is not set +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_FLAT=y +# CONFIG_BINFMT_ZFLAT is not set +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_SLRAM=y +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set + +# +# Disk device support +# + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Networking support +# +# CONFIG_NET is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_HFSPLUS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_NO_KERNEL_MSG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set diff --git a/arch/v850/kernel/anna.c b/arch/v850/kernel/anna.c index 6aaeab5e8a40..d0502e142437 100644 --- a/arch/v850/kernel/anna.c +++ b/arch/v850/kernel/anna.c @@ -132,8 +132,6 @@ void machine_restart (char *__unused) asm ("jmp r0"); /* Jump to the reset vector. */ } -EXPORT_SYMBOL(machine_restart); - void machine_halt (void) { #ifdef CONFIG_RESET_GUARD @@ -145,15 +143,11 @@ void machine_halt (void) asm ("halt; nop; nop; nop; nop; nop"); } -EXPORT_SYMBOL(machine_halt); - void machine_power_off (void) { machine_halt (); } -EXPORT_SYMBOL(machine_power_off); - /* Called before configuring an on-chip UART. */ void anna_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud) { diff --git a/arch/v850/kernel/as85ep1.c b/arch/v850/kernel/as85ep1.c index 4059b1df11b5..d78c5e4ea9bc 100644 --- a/arch/v850/kernel/as85ep1.c +++ b/arch/v850/kernel/as85ep1.c @@ -160,8 +160,6 @@ void machine_restart (char *__unused) asm ("jmp r0"); /* Jump to the reset vector. */ } -EXPORT_SYMBOL(machine_restart); - void machine_halt (void) { #ifdef CONFIG_RESET_GUARD @@ -173,15 +171,11 @@ void machine_halt (void) asm ("halt; nop; nop; nop; nop; nop"); } -EXPORT_SYMBOL(machine_halt); - void machine_power_off (void) { machine_halt (); } -EXPORT_SYMBOL(machine_power_off); - /* Called before configuring an on-chip UART. */ void as85ep1_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud) { diff --git a/arch/v850/kernel/fpga85e2c.c b/arch/v850/kernel/fpga85e2c.c index 4bac5149b3c2..d8094519ad85 100644 --- a/arch/v850/kernel/fpga85e2c.c +++ b/arch/v850/kernel/fpga85e2c.c @@ -121,22 +121,16 @@ void machine_halt (void) } } -EXPORT_SYMBOL(machine_halt); - void machine_restart (char *__unused) { machine_halt (); } -EXPORT_SYMBOL(machine_restart); - void machine_power_off (void) { machine_halt (); } -EXPORT_SYMBOL(machine_power_off); - /* Interrupts */ diff --git a/arch/v850/kernel/rte_cb.c b/arch/v850/kernel/rte_cb.c index 7ba397f77aca..0c794b9e0f9b 100644 --- a/arch/v850/kernel/rte_cb.c +++ b/arch/v850/kernel/rte_cb.c @@ -67,8 +67,6 @@ void machine_restart (char *__unused) asm ("jmp r0"); /* Jump to the reset vector. */ } -EXPORT_SYMBOL(machine_restart); - /* This says `HALt.' in LEDese. */ static unsigned char halt_leds_msg[] = { 0x76, 0x77, 0x38, 0xF8 }; @@ -89,15 +87,11 @@ void machine_halt (void) asm ("halt; nop; nop; nop; nop; nop"); } -EXPORT_SYMBOL(machine_halt); - void machine_power_off (void) { machine_halt (); } -EXPORT_SYMBOL(machine_power_off); - /* Animated LED display for timer tick. */ diff --git a/arch/v850/kernel/rte_mb_a_pci.c b/arch/v850/kernel/rte_mb_a_pci.c index 074b50abc89d..ffbb6d073bf2 100644 --- a/arch/v850/kernel/rte_mb_a_pci.c +++ b/arch/v850/kernel/rte_mb_a_pci.c @@ -1,8 +1,8 @@ /* * arch/v850/kernel/mb_a_pci.c -- PCI support for Midas lab RTE-MOTHER-A board * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> + * Copyright (C) 2001,02,03,05 NEC Electronics Corporation + * Copyright (C) 2001,02,03,05 Miles Bader <miles@gnu.org> * * This file is subject to the terms and conditions of the GNU General * Public License. See the file COPYING in the main directory of this @@ -743,15 +743,17 @@ pci_unmap_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len,int dir) for a scatter-gather list, same rules and usage. */ void -pci_dma_sync_sg_for_cpu (struct pci_dev *dev, struct scatterlist *sg, int sg_len, - int dir) +pci_dma_sync_sg_for_cpu (struct pci_dev *dev, + struct scatterlist *sg, int sg_len, + int dir) { BUG (); } void -pci_dma_sync_sg_for_device (struct pci_dev *dev, struct scatterlist *sg, int sg_len, - int dir) +pci_dma_sync_sg_for_device (struct pci_dev *dev, + struct scatterlist *sg, int sg_len, + int dir) { BUG (); } @@ -786,6 +788,27 @@ pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr, } +/* iomap/iomap */ + +void __iomem *pci_iomap (struct pci_dev *dev, int bar, unsigned long max) +{ + unsigned long start = pci_resource_start (dev, bar); + unsigned long len = pci_resource_len (dev, bar); + + if (!start || len == 0) + return 0; + + /* None of the ioremap functions actually do anything, other than + re-casting their argument, so don't bother differentiating them. */ + return ioremap (start, len); +} + +void pci_iounmap (struct pci_dev *dev, void __iomem *addr) +{ + /* nothing */ +} + + /* symbol exports (for modules) */ EXPORT_SYMBOL (pci_map_single); @@ -794,3 +817,5 @@ EXPORT_SYMBOL (pci_alloc_consistent); EXPORT_SYMBOL (pci_free_consistent); EXPORT_SYMBOL (pci_dma_sync_single_for_cpu); EXPORT_SYMBOL (pci_dma_sync_single_for_device); +EXPORT_SYMBOL (pci_iomap); +EXPORT_SYMBOL (pci_iounmap); diff --git a/arch/v850/kernel/sim.c b/arch/v850/kernel/sim.c index 4f31da962632..e2cc5580fa2a 100644 --- a/arch/v850/kernel/sim.c +++ b/arch/v850/kernel/sim.c @@ -104,24 +104,18 @@ void machine_restart (char *__unused) V850_SIM_SYSCALL (exit, 0); } -EXPORT_SYMBOL(machine_restart); - void machine_halt (void) { V850_SIM_SYSCALL (write, 1, "HALT\n", 5); V850_SIM_SYSCALL (exit, 0); } -EXPORT_SYMBOL(machine_halt); - void machine_power_off (void) { V850_SIM_SYSCALL (write, 1, "POWER OFF\n", 10); V850_SIM_SYSCALL (exit, 0); } -EXPORT_SYMBOL(machine_power_off); - /* Load data from a file called NAME into ram. The address and length of the data image are returned in ADDR and LEN. */ diff --git a/arch/v850/kernel/sim85e2.c b/arch/v850/kernel/sim85e2.c index 93a722b516bb..9111613fb53a 100644 --- a/arch/v850/kernel/sim85e2.c +++ b/arch/v850/kernel/sim85e2.c @@ -184,18 +184,13 @@ void machine_halt (void) for (;;) {} } -EXPORT_SYMBOL(machine_halt); - void machine_restart (char *__unused) { machine_halt (); } -EXPORT_SYMBOL(machine_restart); - void machine_power_off (void) { machine_halt (); } -EXPORT_SYMBOL(machine_power_off); diff --git a/arch/v850/kernel/vmlinux.lds.S b/arch/v850/kernel/vmlinux.lds.S index bbd3429bcffc..5be05f47109e 100644 --- a/arch/v850/kernel/vmlinux.lds.S +++ b/arch/v850/kernel/vmlinux.lds.S @@ -1,8 +1,8 @@ /* * arch/v850/vmlinux.lds.S -- kernel linker script for v850 platforms * - * Copyright (C) 2002,03,04 NEC Electronics Corporation - * Copyright (C) 2002,03,04 Miles Bader <miles@gnu.org> + * Copyright (C) 2002,03,04,05 NEC Electronics Corporation + * Copyright (C) 2002,03,04,05 Miles Bader <miles@gnu.org> * * This file is subject to the terms and conditions of the GNU General * Public License. See the file COPYING in the main directory of this @@ -12,6 +12,7 @@ */ #include <linux/config.h> + #define VMLINUX_SYMBOL(_sym_) _##_sym_ #include <asm-generic/vmlinux.lds.h> @@ -42,6 +43,19 @@ *(.rodata) *(.rodata.*) \ *(__vermagic) /* Kernel version magic */ \ *(.rodata1) \ + /* PCI quirks */ \ + ___start_pci_fixups_early = . ; \ + *(.pci_fixup_early) \ + ___end_pci_fixups_early = . ; \ + ___start_pci_fixups_header = . ; \ + *(.pci_fixup_header) \ + ___end_pci_fixups_header = . ; \ + ___start_pci_fixups_final = . ; \ + *(.pci_fixup_final) \ + ___end_pci_fixups_final = . ; \ + ___start_pci_fixups_enable = . ; \ + *(.pci_fixup_enable) \ + ___end_pci_fixups_enable = . ; \ /* Kernel symbol table: Normal symbols */ \ ___start___ksymtab = .; \ *(__ksymtab) \ @@ -61,6 +75,7 @@ *(__kcrctab_gpl) \ ___stop___kcrctab_gpl = .; \ /* Built-in module parameters */ \ + . = ALIGN (4) ; \ ___start___param = .; \ *(__param) \ ___stop___param = .; diff --git a/arch/v850/lib/checksum.c b/arch/v850/lib/checksum.c index d308b724c023..fa5872633075 100644 --- a/arch/v850/lib/checksum.c +++ b/arch/v850/lib/checksum.c @@ -138,7 +138,8 @@ unsigned int csum_partial_copy(const unsigned char *src, unsigned char *dst, * Copy from userspace and compute checksum. If we catch an exception * then zero the rest of the buffer. */ -unsigned int csum_partial_copy_from_user (const unsigned char *src, unsigned char *dst, +unsigned int csum_partial_copy_from_user (const unsigned char *src, + unsigned char *dst, int len, unsigned int sum, int *err_ptr) { diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 289f448ac89c..660a03a89e66 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -207,33 +207,6 @@ config SMP If you don't know what to do here, say N. -config PREEMPT - bool "Preemptible Kernel" - ---help--- - This option reduces the latency of the kernel when reacting to - real-time or interactive events by allowing a low priority process to - be preempted even if it is in kernel mode executing a system call. - This allows applications to run more reliably even when the system is - under load. On contrary it may also break your drivers and add - priority inheritance problems to your system. Don't select it if - you rely on a stable system or have slightly obscure hardware. - It's also not very well tested on x86-64 currently. - You have been warned. - - Say Y here if you are feeling brave and building a kernel for a - desktop, embedded or real-time system. Say N if you are unsure. - -config PREEMPT_BKL - bool "Preempt The Big Kernel Lock" - depends on PREEMPT - default y - help - This option reduces the latency of the kernel by making the - big kernel lock preemptible. - - Say Y here if you are building a kernel for a desktop system. - Say N if you are unsure. - config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" depends on SMP @@ -244,6 +217,8 @@ config SCHED_SMT cost of slightly increased overhead in some places. If unsure say N here. +source "kernel/Kconfig.preempt" + config K8_NUMA bool "K8 NUMA support" select NUMA @@ -265,7 +240,7 @@ config NUMA_EMU into virtual nodes when booted with "numa=fake=N", where N is the number of nodes. This is only useful for debugging. -config DISCONTIGMEM +config ARCH_DISCONTIGMEM_ENABLE bool depends on NUMA default y @@ -274,6 +249,27 @@ config NUMA bool default n +config ARCH_DISCONTIGMEM_ENABLE + def_bool y + depends on NUMA + +config ARCH_DISCONTIGMEM_DEFAULT + def_bool y + depends on NUMA + +config ARCH_SPARSEMEM_ENABLE + def_bool y + depends on NUMA + +config ARCH_FLATMEM_ENABLE + def_bool y + depends on !NUMA + +source "mm/Kconfig" + +config HAVE_ARCH_EARLY_PFN_TO_NID + def_bool y + config HAVE_DEC_LOCK bool depends on SMP @@ -292,6 +288,15 @@ config NR_CPUS This is purely to save memory - each supported CPU requires memory in the static kernel configuration. +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" + depends on SMP && HOTPLUG && EXPERIMENTAL + help + Say Y here to experiment with turning CPUs off and on. CPUs + can be controlled through /sys/devices/system/cpu/cpu#. + Say N if you want to disable CPU hotplug. + + config HPET_TIMER bool default y @@ -324,12 +329,15 @@ config HPET_EMULATE_RTC config GART_IOMMU bool "IOMMU support" + default y depends on PCI help - Support the K8 IOMMU. Needed to run systems with more than 4GB of memory + Support the IOMMU. Needed to run systems with more than 3GB of memory properly with 32-bit PCI devices that do not support DAC (Double Address Cycle). The IOMMU can be turned off at runtime with the iommu=off parameter. Normally the kernel will take the right choice by itself. + This option includes a driver for the AMD Opteron/Athlon64 IOMMU + and a software emulation used on some other systems. If unsure, say Y. # need this always enabled with GART_IOMMU for the VIA workaround @@ -364,6 +372,34 @@ config X86_MCE_INTEL Additional support for intel specific MCE features such as the thermal monitor. +config PHYSICAL_START + hex "Physical address where the kernel is loaded" if EMBEDDED + default "0x100000" + help + This gives the physical address where the kernel is loaded. + Primarily used in the case of kexec on panic where the + fail safe kernel needs to run at a different address than + the panic-ed kernel. + + Don't change this unless you know what you are doing. + +config KEXEC + bool "kexec system call (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is indepedent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similiarity to the exec system call. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. It may help to enable device hotplugging + support. As of this writing the exact hardware interface is + strongly in flux, so no good recommendation can be made. + config SECCOMP bool "Enable seccomp to safely compute untrusted bytecode" depends on PROC_FS @@ -381,6 +417,8 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. +source kernel/Kconfig.hz + endmenu # @@ -480,6 +518,8 @@ config UID16 endmenu +source "net/Kconfig" + source drivers/Kconfig source "drivers/firmware/Kconfig" diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile index 6f90c246c418..4c6ed96d5f7c 100644 --- a/arch/x86_64/Makefile +++ b/arch/x86_64/Makefile @@ -21,21 +21,9 @@ # # $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $ -# -# early bootup linking needs 32bit. You can either use real 32bit tools -# here or 64bit tools in 32bit mode. -# -IA32_CC := $(CC) $(CPPFLAGS) -m32 -O2 -fomit-frame-pointer -IA32_LD := $(LD) -m elf_i386 -IA32_AS := $(CC) $(AFLAGS) -m32 -Wa,--32 -traditional -c -IA32_OBJCOPY := $(CROSS_COMPILE)objcopy -IA32_CPP := $(CROSS_COMPILE)gcc -m32 -E -export IA32_CC IA32_LD IA32_AS IA32_OBJCOPY IA32_CPP - - LDFLAGS := -m elf_x86_64 OBJCOPYFLAGS := -O binary -R .note -R .comment -S -LDFLAGS_vmlinux := -e stext +LDFLAGS_vmlinux := CHECKFLAGS += -D__x86_64__ -m64 @@ -65,7 +53,9 @@ CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,) head-y := arch/x86_64/kernel/head.o arch/x86_64/kernel/head64.o arch/x86_64/kernel/init_task.o libs-y += arch/x86_64/lib/ -core-y += arch/x86_64/kernel/ arch/x86_64/mm/ +core-y += arch/x86_64/kernel/ \ + arch/x86_64/mm/ \ + arch/x86_64/crypto/ core-$(CONFIG_IA32_EMULATION) += arch/x86_64/ia32/ drivers-$(CONFIG_PCI) += arch/x86_64/pci/ drivers-$(CONFIG_OPROFILE) += arch/x86_64/oprofile/ diff --git a/arch/x86_64/boot/compressed/head.S b/arch/x86_64/boot/compressed/head.S index 27264dbd575c..6f55565e4d42 100644 --- a/arch/x86_64/boot/compressed/head.S +++ b/arch/x86_64/boot/compressed/head.S @@ -2,8 +2,6 @@ * linux/boot/head.S * * Copyright (C) 1991, 1992, 1993 Linus Torvalds - * - * $Id: head.S,v 1.3 2001/04/20 00:59:28 ak Exp $ */ /* @@ -21,13 +19,14 @@ */ /* - * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 + * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 */ .code32 .text #include <linux/linkage.h> #include <asm/segment.h> +#include <asm/page.h> .code32 .globl startup_32 @@ -77,7 +76,7 @@ startup_32: jnz 3f addl $8,%esp xorl %ebx,%ebx - ljmp $(__KERNEL_CS), $0x100000 + ljmp $(__KERNEL_CS), $__PHYSICAL_START /* * We come here, if we were loaded high. @@ -103,7 +102,7 @@ startup_32: popl %ecx # lcount popl %edx # high_buffer_start popl %eax # hcount - movl $0x100000,%edi + movl $__PHYSICAL_START,%edi cli # make sure we don't get interrupted ljmp $(__KERNEL_CS), $0x1000 # and jump to the move routine @@ -128,7 +127,7 @@ move_routine_start: movsl movl %ebx,%esi # Restore setup pointer xorl %ebx,%ebx - ljmp $(__KERNEL_CS), $0x100000 + ljmp $(__KERNEL_CS), $__PHYSICAL_START move_routine_end: diff --git a/arch/x86_64/boot/compressed/misc.c b/arch/x86_64/boot/compressed/misc.c index c8b9216f9e63..b38d5b8b5fb8 100644 --- a/arch/x86_64/boot/compressed/misc.c +++ b/arch/x86_64/boot/compressed/misc.c @@ -11,6 +11,7 @@ #include "miscsetup.h" #include <asm/io.h> +#include <asm/page.h> /* * gzip declarations @@ -92,8 +93,11 @@ static unsigned long output_ptr = 0; static void *malloc(int size); static void free(void *where); +void* memset(void* s, int c, unsigned n); +void* memcpy(void* dest, const void* src, unsigned n); + static void putstr(const char *); - + extern int end; static long free_mem_ptr = (long)&end; static long free_mem_end_ptr; @@ -284,7 +288,7 @@ void setup_normal_output_buffer(void) #else if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < 1024) error("Less than 2MB of memory"); #endif - output_data = (char *)0x100000; /* Points to 1M */ + output_data = (char *)__PHYSICAL_START; /* Normally Points to 1M */ free_mem_end_ptr = (long)real_mode; } @@ -307,8 +311,8 @@ void setup_output_buffer_if_we_run_high(struct moveparams *mv) low_buffer_size = low_buffer_end - LOW_BUFFER_START; high_loaded = 1; free_mem_end_ptr = (long)high_buffer_start; - if ( (0x100000 + low_buffer_size) > ((ulg)high_buffer_start)) { - high_buffer_start = (uch *)(0x100000 + low_buffer_size); + if ( (__PHYSICAL_START + low_buffer_size) > ((ulg)high_buffer_start)) { + high_buffer_start = (uch *)(__PHYSICAL_START + low_buffer_size); mv->hcount = 0; /* say: we need not to move high_buffer */ } else mv->hcount = -1; diff --git a/arch/x86_64/boot/install.sh b/arch/x86_64/boot/install.sh index 90f2452b3b9e..198af15a7758 100644 --- a/arch/x86_64/boot/install.sh +++ b/arch/x86_64/boot/install.sh @@ -1,6 +1,6 @@ #!/bin/sh # -# arch/i386/boot/install.sh +# arch/x86_64/boot/install.sh # # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive @@ -21,8 +21,8 @@ # User may have a custom install script -if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi -if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi +if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi +if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi # Default install - same as make zlilo diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S index 75d4d2ad93b3..ff58b2832b75 100644 --- a/arch/x86_64/boot/setup.S +++ b/arch/x86_64/boot/setup.S @@ -33,7 +33,7 @@ * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999. * <stiker@northlink.com> * - * Fix to work around buggy BIOSes which dont use carry bit correctly + * Fix to work around buggy BIOSes which don't use carry bit correctly * and/or report extended memory in CX/DX for e801h memory size detection * call. As a result the kernel got wrong figures. The int15/e801h docs * from Ralf Brown interrupt list seem to indicate AX/BX should be used @@ -383,7 +383,7 @@ sse_ok: # a whole bunch of different types, and allows memory holes and # everything. We scan through this memory map and build a list # of the first 32 memory areas, which we return at [E820MAP]. -# This is documented at http://www.teleport.com/~acpi/acpihtml/topic245.htm +# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification. #define SMAP 0x534d4150 @@ -436,7 +436,7 @@ bail820: meme801: stc # fix to work around buggy - xorw %cx,%cx # BIOSes which dont clear/set + xorw %cx,%cx # BIOSes which don't clear/set xorw %dx,%dx # carry on pass/error of # e801h memory size call # or merely pass cx,dx though @@ -733,7 +733,7 @@ flush_instr: # # but we yet haven't reloaded the CS register, so the default size # of the target offset still is 16 bit. -# However, using an operant prefix (0x66), the CPU will properly +# However, using an operand prefix (0x66), the CPU will properly # take our 48 bit far pointer. (INTeL 80386 Programmer's Reference # Manual, Mixing 16-bit and 32-bit code, page 16-6) diff --git a/arch/x86_64/boot/tools/build.c b/arch/x86_64/boot/tools/build.c index c2fa66313170..18b5bac1c428 100644 --- a/arch/x86_64/boot/tools/build.c +++ b/arch/x86_64/boot/tools/build.c @@ -1,6 +1,4 @@ /* - * $Id: build.c,v 1.3 2001/06/26 15:14:50 pavel Exp $ - * * Copyright (C) 1991, 1992 Linus Torvalds * Copyright (C) 1997 Martin Mares */ @@ -8,7 +6,8 @@ /* * This file builds a disk-image from three different files: * - * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest + * - bootsect: compatibility mbr which prints an error message if + * someone tries to boot the kernel directly. * - setup: 8086 machine code, sets up system parm * - system: 80386 code for actual system * diff --git a/arch/x86_64/crypto/Makefile b/arch/x86_64/crypto/Makefile new file mode 100644 index 000000000000..426d20f4b72e --- /dev/null +++ b/arch/x86_64/crypto/Makefile @@ -0,0 +1,9 @@ +# +# x86_64/crypto/Makefile +# +# Arch-specific CryptoAPI modules. +# + +obj-$(CONFIG_CRYPTO_AES_X86_64) += aes-x86_64.o + +aes-x86_64-y := aes-x86_64-asm.o aes.o diff --git a/arch/x86_64/crypto/aes-x86_64-asm.S b/arch/x86_64/crypto/aes-x86_64-asm.S new file mode 100644 index 000000000000..483cbb23ab8d --- /dev/null +++ b/arch/x86_64/crypto/aes-x86_64-asm.S @@ -0,0 +1,186 @@ +/* AES (Rijndael) implementation (FIPS PUB 197) for x86_64 + * + * Copyright (C) 2005 Andreas Steinmetz, <ast@domdv.de> + * + * License: + * This code can be distributed under the terms of the GNU General Public + * License (GPL) Version 2 provided that the above header down to and + * including this sentence is retained in full. + */ + +.extern aes_ft_tab +.extern aes_it_tab +.extern aes_fl_tab +.extern aes_il_tab + +.text + +#define R1 %rax +#define R1E %eax +#define R1X %ax +#define R1H %ah +#define R1L %al +#define R2 %rbx +#define R2E %ebx +#define R2X %bx +#define R2H %bh +#define R2L %bl +#define R3 %rcx +#define R3E %ecx +#define R3X %cx +#define R3H %ch +#define R3L %cl +#define R4 %rdx +#define R4E %edx +#define R4X %dx +#define R4H %dh +#define R4L %dl +#define R5 %rsi +#define R5E %esi +#define R6 %rdi +#define R6E %edi +#define R7 %rbp +#define R7E %ebp +#define R8 %r8 +#define R9 %r9 +#define R10 %r10 +#define R11 %r11 + +#define prologue(FUNC,BASE,B128,B192,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11) \ + .global FUNC; \ + .type FUNC,@function; \ + .align 8; \ +FUNC: movq r1,r2; \ + movq r3,r4; \ + leaq BASE+52(r8),r9; \ + movq r10,r11; \ + movl (r7),r5 ## E; \ + movl 4(r7),r1 ## E; \ + movl 8(r7),r6 ## E; \ + movl 12(r7),r7 ## E; \ + movl (r8),r10 ## E; \ + xorl -48(r9),r5 ## E; \ + xorl -44(r9),r1 ## E; \ + xorl -40(r9),r6 ## E; \ + xorl -36(r9),r7 ## E; \ + cmpl $24,r10 ## E; \ + jb B128; \ + leaq 32(r9),r9; \ + je B192; \ + leaq 32(r9),r9; + +#define epilogue(r1,r2,r3,r4,r5,r6,r7,r8,r9) \ + movq r1,r2; \ + movq r3,r4; \ + movl r5 ## E,(r9); \ + movl r6 ## E,4(r9); \ + movl r7 ## E,8(r9); \ + movl r8 ## E,12(r9); \ + ret; + +#define round(TAB,OFFSET,r1,r2,r3,r4,r5,r6,r7,r8,ra,rb,rc,rd) \ + movzbl r2 ## H,r5 ## E; \ + movzbl r2 ## L,r6 ## E; \ + movl TAB+1024(,r5,4),r5 ## E;\ + movw r4 ## X,r2 ## X; \ + movl TAB(,r6,4),r6 ## E; \ + roll $16,r2 ## E; \ + shrl $16,r4 ## E; \ + movzbl r4 ## H,r7 ## E; \ + movzbl r4 ## L,r4 ## E; \ + xorl OFFSET(r8),ra ## E; \ + xorl OFFSET+4(r8),rb ## E; \ + xorl TAB+3072(,r7,4),r5 ## E;\ + xorl TAB+2048(,r4,4),r6 ## E;\ + movzbl r1 ## L,r7 ## E; \ + movzbl r1 ## H,r4 ## E; \ + movl TAB+1024(,r4,4),r4 ## E;\ + movw r3 ## X,r1 ## X; \ + roll $16,r1 ## E; \ + shrl $16,r3 ## E; \ + xorl TAB(,r7,4),r5 ## E; \ + movzbl r3 ## H,r7 ## E; \ + movzbl r3 ## L,r3 ## E; \ + xorl TAB+3072(,r7,4),r4 ## E;\ + xorl TAB+2048(,r3,4),r5 ## E;\ + movzbl r1 ## H,r7 ## E; \ + movzbl r1 ## L,r3 ## E; \ + shrl $16,r1 ## E; \ + xorl TAB+3072(,r7,4),r6 ## E;\ + movl TAB+2048(,r3,4),r3 ## E;\ + movzbl r1 ## H,r7 ## E; \ + movzbl r1 ## L,r1 ## E; \ + xorl TAB+1024(,r7,4),r6 ## E;\ + xorl TAB(,r1,4),r3 ## E; \ + movzbl r2 ## H,r1 ## E; \ + movzbl r2 ## L,r7 ## E; \ + shrl $16,r2 ## E; \ + xorl TAB+3072(,r1,4),r3 ## E;\ + xorl TAB+2048(,r7,4),r4 ## E;\ + movzbl r2 ## H,r1 ## E; \ + movzbl r2 ## L,r2 ## E; \ + xorl OFFSET+8(r8),rc ## E; \ + xorl OFFSET+12(r8),rd ## E; \ + xorl TAB+1024(,r1,4),r3 ## E;\ + xorl TAB(,r2,4),r4 ## E; + +#define move_regs(r1,r2,r3,r4) \ + movl r3 ## E,r1 ## E; \ + movl r4 ## E,r2 ## E; + +#define entry(FUNC,BASE,B128,B192) \ + prologue(FUNC,BASE,B128,B192,R2,R8,R7,R9,R1,R3,R4,R6,R10,R5,R11) + +#define return epilogue(R8,R2,R9,R7,R5,R6,R3,R4,R11) + +#define encrypt_round(TAB,OFFSET) \ + round(TAB,OFFSET,R1,R2,R3,R4,R5,R6,R7,R10,R5,R6,R3,R4) \ + move_regs(R1,R2,R5,R6) + +#define encrypt_final(TAB,OFFSET) \ + round(TAB,OFFSET,R1,R2,R3,R4,R5,R6,R7,R10,R5,R6,R3,R4) + +#define decrypt_round(TAB,OFFSET) \ + round(TAB,OFFSET,R2,R1,R4,R3,R6,R5,R7,R10,R5,R6,R3,R4) \ + move_regs(R1,R2,R5,R6) + +#define decrypt_final(TAB,OFFSET) \ + round(TAB,OFFSET,R2,R1,R4,R3,R6,R5,R7,R10,R5,R6,R3,R4) + +/* void aes_encrypt(void *ctx, u8 *out, const u8 *in) */ + + entry(aes_encrypt,0,enc128,enc192) + encrypt_round(aes_ft_tab,-96) + encrypt_round(aes_ft_tab,-80) +enc192: encrypt_round(aes_ft_tab,-64) + encrypt_round(aes_ft_tab,-48) +enc128: encrypt_round(aes_ft_tab,-32) + encrypt_round(aes_ft_tab,-16) + encrypt_round(aes_ft_tab, 0) + encrypt_round(aes_ft_tab, 16) + encrypt_round(aes_ft_tab, 32) + encrypt_round(aes_ft_tab, 48) + encrypt_round(aes_ft_tab, 64) + encrypt_round(aes_ft_tab, 80) + encrypt_round(aes_ft_tab, 96) + encrypt_final(aes_fl_tab,112) + return + +/* void aes_decrypt(void *ctx, u8 *out, const u8 *in) */ + + entry(aes_decrypt,240,dec128,dec192) + decrypt_round(aes_it_tab,-96) + decrypt_round(aes_it_tab,-80) +dec192: decrypt_round(aes_it_tab,-64) + decrypt_round(aes_it_tab,-48) +dec128: decrypt_round(aes_it_tab,-32) + decrypt_round(aes_it_tab,-16) + decrypt_round(aes_it_tab, 0) + decrypt_round(aes_it_tab, 16) + decrypt_round(aes_it_tab, 32) + decrypt_round(aes_it_tab, 48) + decrypt_round(aes_it_tab, 64) + decrypt_round(aes_it_tab, 80) + decrypt_round(aes_it_tab, 96) + decrypt_final(aes_il_tab,112) + return diff --git a/arch/x86_64/crypto/aes.c b/arch/x86_64/crypto/aes.c new file mode 100644 index 000000000000..acfdaa28791e --- /dev/null +++ b/arch/x86_64/crypto/aes.c @@ -0,0 +1,325 @@ +/* + * Cryptographic API. + * + * AES Cipher Algorithm. + * + * Based on Brian Gladman's code. + * + * Linux developers: + * Alexander Kjeldaas <astor@fast.no> + * Herbert Valerio Riedel <hvr@hvrlab.org> + * Kyle McMartin <kyle@debian.org> + * Adam J. Richter <adam@yggdrasil.com> (conversion to 2.5 API). + * Andreas Steinmetz <ast@domdv.de> (adapted to x86_64 assembler) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * --------------------------------------------------------------------------- + * Copyright (c) 2002, Dr Brian Gladman <brg@gladman.me.uk>, Worcester, UK. + * All rights reserved. + * + * LICENSE TERMS + * + * The free distribution and use of this software in both source and binary + * form is allowed (with or without changes) provided that: + * + * 1. distributions of this source code include the above copyright + * notice, this list of conditions and the following disclaimer; + * + * 2. distributions in binary form include the above copyright + * notice, this list of conditions and the following disclaimer + * in the documentation and/or other associated materials; + * + * 3. the copyright holder's name is not used to endorse products + * built using this software without specific written permission. + * + * ALTERNATIVELY, provided that this notice is retained in full, this product + * may be distributed under the terms of the GNU General Public License (GPL), + * in which case the provisions of the GPL apply INSTEAD OF those given above. + * + * DISCLAIMER + * + * This software is provided 'as is' with no explicit or implied warranties + * in respect of its properties, including, but not limited to, correctness + * and/or fitness for purpose. + * --------------------------------------------------------------------------- + */ + +/* Some changes from the Gladman version: + s/RIJNDAEL(e_key)/E_KEY/g + s/RIJNDAEL(d_key)/D_KEY/g +*/ + +#include <asm/byteorder.h> +#include <linux/bitops.h> +#include <linux/crypto.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> + +#define AES_MIN_KEY_SIZE 16 +#define AES_MAX_KEY_SIZE 32 + +#define AES_BLOCK_SIZE 16 + +/* + * #define byte(x, nr) ((unsigned char)((x) >> (nr*8))) + */ +static inline u8 byte(const u32 x, const unsigned n) +{ + return x >> (n << 3); +} + +#define u32_in(x) le32_to_cpu(*(const __le32 *)(x)) + +struct aes_ctx +{ + u32 key_length; + u32 E[60]; + u32 D[60]; +}; + +#define E_KEY ctx->E +#define D_KEY ctx->D + +static u8 pow_tab[256] __initdata; +static u8 log_tab[256] __initdata; +static u8 sbx_tab[256] __initdata; +static u8 isb_tab[256] __initdata; +static u32 rco_tab[10]; +u32 aes_ft_tab[4][256]; +u32 aes_it_tab[4][256]; + +u32 aes_fl_tab[4][256]; +u32 aes_il_tab[4][256]; + +static inline u8 f_mult(u8 a, u8 b) +{ + u8 aa = log_tab[a], cc = aa + log_tab[b]; + + return pow_tab[cc + (cc < aa ? 1 : 0)]; +} + +#define ff_mult(a, b) (a && b ? f_mult(a, b) : 0) + +#define ls_box(x) \ + (aes_fl_tab[0][byte(x, 0)] ^ \ + aes_fl_tab[1][byte(x, 1)] ^ \ + aes_fl_tab[2][byte(x, 2)] ^ \ + aes_fl_tab[3][byte(x, 3)]) + +static void __init gen_tabs(void) +{ + u32 i, t; + u8 p, q; + + /* log and power tables for GF(2**8) finite field with + 0x011b as modular polynomial - the simplest primitive + root is 0x03, used here to generate the tables */ + + for (i = 0, p = 1; i < 256; ++i) { + pow_tab[i] = (u8)p; + log_tab[p] = (u8)i; + + p ^= (p << 1) ^ (p & 0x80 ? 0x01b : 0); + } + + log_tab[1] = 0; + + for (i = 0, p = 1; i < 10; ++i) { + rco_tab[i] = p; + + p = (p << 1) ^ (p & 0x80 ? 0x01b : 0); + } + + for (i = 0; i < 256; ++i) { + p = (i ? pow_tab[255 - log_tab[i]] : 0); + q = ((p >> 7) | (p << 1)) ^ ((p >> 6) | (p << 2)); + p ^= 0x63 ^ q ^ ((q >> 6) | (q << 2)); + sbx_tab[i] = p; + isb_tab[p] = (u8)i; + } + + for (i = 0; i < 256; ++i) { + p = sbx_tab[i]; + + t = p; + aes_fl_tab[0][i] = t; + aes_fl_tab[1][i] = rol32(t, 8); + aes_fl_tab[2][i] = rol32(t, 16); + aes_fl_tab[3][i] = rol32(t, 24); + + t = ((u32)ff_mult(2, p)) | + ((u32)p << 8) | + ((u32)p << 16) | ((u32)ff_mult(3, p) << 24); + + aes_ft_tab[0][i] = t; + aes_ft_tab[1][i] = rol32(t, 8); + aes_ft_tab[2][i] = rol32(t, 16); + aes_ft_tab[3][i] = rol32(t, 24); + + p = isb_tab[i]; + + t = p; + aes_il_tab[0][i] = t; + aes_il_tab[1][i] = rol32(t, 8); + aes_il_tab[2][i] = rol32(t, 16); + aes_il_tab[3][i] = rol32(t, 24); + + t = ((u32)ff_mult(14, p)) | + ((u32)ff_mult(9, p) << 8) | + ((u32)ff_mult(13, p) << 16) | + ((u32)ff_mult(11, p) << 24); + + aes_it_tab[0][i] = t; + aes_it_tab[1][i] = rol32(t, 8); + aes_it_tab[2][i] = rol32(t, 16); + aes_it_tab[3][i] = rol32(t, 24); + } +} + +#define star_x(x) (((x) & 0x7f7f7f7f) << 1) ^ ((((x) & 0x80808080) >> 7) * 0x1b) + +#define imix_col(y, x) \ + u = star_x(x); \ + v = star_x(u); \ + w = star_x(v); \ + t = w ^ (x); \ + (y) = u ^ v ^ w; \ + (y) ^= ror32(u ^ t, 8) ^ \ + ror32(v ^ t, 16) ^ \ + ror32(t, 24) + +/* initialise the key schedule from the user supplied key */ + +#define loop4(i) \ +{ \ + t = ror32(t, 8); t = ls_box(t) ^ rco_tab[i]; \ + t ^= E_KEY[4 * i]; E_KEY[4 * i + 4] = t; \ + t ^= E_KEY[4 * i + 1]; E_KEY[4 * i + 5] = t; \ + t ^= E_KEY[4 * i + 2]; E_KEY[4 * i + 6] = t; \ + t ^= E_KEY[4 * i + 3]; E_KEY[4 * i + 7] = t; \ +} + +#define loop6(i) \ +{ \ + t = ror32(t, 8); t = ls_box(t) ^ rco_tab[i]; \ + t ^= E_KEY[6 * i]; E_KEY[6 * i + 6] = t; \ + t ^= E_KEY[6 * i + 1]; E_KEY[6 * i + 7] = t; \ + t ^= E_KEY[6 * i + 2]; E_KEY[6 * i + 8] = t; \ + t ^= E_KEY[6 * i + 3]; E_KEY[6 * i + 9] = t; \ + t ^= E_KEY[6 * i + 4]; E_KEY[6 * i + 10] = t; \ + t ^= E_KEY[6 * i + 5]; E_KEY[6 * i + 11] = t; \ +} + +#define loop8(i) \ +{ \ + t = ror32(t, 8); ; t = ls_box(t) ^ rco_tab[i]; \ + t ^= E_KEY[8 * i]; E_KEY[8 * i + 8] = t; \ + t ^= E_KEY[8 * i + 1]; E_KEY[8 * i + 9] = t; \ + t ^= E_KEY[8 * i + 2]; E_KEY[8 * i + 10] = t; \ + t ^= E_KEY[8 * i + 3]; E_KEY[8 * i + 11] = t; \ + t = E_KEY[8 * i + 4] ^ ls_box(t); \ + E_KEY[8 * i + 12] = t; \ + t ^= E_KEY[8 * i + 5]; E_KEY[8 * i + 13] = t; \ + t ^= E_KEY[8 * i + 6]; E_KEY[8 * i + 14] = t; \ + t ^= E_KEY[8 * i + 7]; E_KEY[8 * i + 15] = t; \ +} + +static int aes_set_key(void *ctx_arg, const u8 *in_key, unsigned int key_len, + u32 *flags) +{ + struct aes_ctx *ctx = ctx_arg; + u32 i, j, t, u, v, w; + + if (key_len != 16 && key_len != 24 && key_len != 32) { + *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; + } + + ctx->key_length = key_len; + + D_KEY[key_len + 24] = E_KEY[0] = u32_in(in_key); + D_KEY[key_len + 25] = E_KEY[1] = u32_in(in_key + 4); + D_KEY[key_len + 26] = E_KEY[2] = u32_in(in_key + 8); + D_KEY[key_len + 27] = E_KEY[3] = u32_in(in_key + 12); + + switch (key_len) { + case 16: + t = E_KEY[3]; + for (i = 0; i < 10; ++i) + loop4(i); + break; + + case 24: + E_KEY[4] = u32_in(in_key + 16); + t = E_KEY[5] = u32_in(in_key + 20); + for (i = 0; i < 8; ++i) + loop6 (i); + break; + + case 32: + E_KEY[4] = u32_in(in_key + 16); + E_KEY[5] = u32_in(in_key + 20); + E_KEY[6] = u32_in(in_key + 24); + t = E_KEY[7] = u32_in(in_key + 28); + for (i = 0; i < 7; ++i) + loop8(i); + break; + } + + D_KEY[0] = E_KEY[key_len + 24]; + D_KEY[1] = E_KEY[key_len + 25]; + D_KEY[2] = E_KEY[key_len + 26]; + D_KEY[3] = E_KEY[key_len + 27]; + + for (i = 4; i < key_len + 24; ++i) { + j = key_len + 24 - (i & ~3) + (i & 3); + imix_col(D_KEY[j], E_KEY[i]); + } + + return 0; +} + +extern void aes_encrypt(void *ctx_arg, u8 *out, const u8 *in); +extern void aes_decrypt(void *ctx_arg, u8 *out, const u8 *in); + +static struct crypto_alg aes_alg = { + .cra_name = "aes", + .cra_flags = CRYPTO_ALG_TYPE_CIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct aes_ctx), + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(aes_alg.cra_list), + .cra_u = { + .cipher = { + .cia_min_keysize = AES_MIN_KEY_SIZE, + .cia_max_keysize = AES_MAX_KEY_SIZE, + .cia_setkey = aes_set_key, + .cia_encrypt = aes_encrypt, + .cia_decrypt = aes_decrypt + } + } +}; + +static int __init aes_init(void) +{ + gen_tabs(); + return crypto_register_alg(&aes_alg); +} + +static void __exit aes_fini(void) +{ + crypto_unregister_alg(&aes_alg); +} + +module_init(aes_init); +module_exit(aes_fini); + +MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("aes"); diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 569595b74c7c..776f3c866b70 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc4 -# Fri May 13 06:39:11 2005 +# Linux kernel version: 2.6.13-rc3 +# Fri Jul 22 16:47:31 2005 # CONFIG_X86_64=y CONFIG_64BIT=y @@ -84,14 +84,27 @@ CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_MTRR=y CONFIG_SMP=y -# CONFIG_PREEMPT is not set CONFIG_SCHED_SMT=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y CONFIG_K8_NUMA=y # CONFIG_NUMA_EMU is not set -CONFIG_DISCONTIGMEM=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_NUMA=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_HAVE_DEC_LOCK=y -CONFIG_NR_CPUS=8 +CONFIG_NR_CPUS=32 CONFIG_HPET_TIMER=y CONFIG_X86_PM_TIMER=y CONFIG_HPET_EMULATE_RTC=y @@ -99,7 +112,13 @@ CONFIG_GART_IOMMU=y CONFIG_SWIOTLB=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y +CONFIG_PHYSICAL_START=0x100000 +# CONFIG_KEXEC is not set CONFIG_SECCOMP=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y @@ -118,12 +137,11 @@ CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y # CONFIG_ACPI_VIDEO is not set +CONFIG_ACPI_HOTKEY=m CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y @@ -154,6 +172,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers @@ -204,6 +223,76 @@ CONFIG_SYSVIPC_COMPAT=y CONFIG_UID16=y # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +CONFIG_IP_TCPDIAG_IPV6=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -308,6 +397,7 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set CONFIG_BLK_DEV_PDC202XX_NEW=y @@ -338,6 +428,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -372,7 +463,6 @@ CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set CONFIG_SCSI_ATA_PIIX=y # CONFIG_SCSI_SATA_NV is not set @@ -410,14 +500,21 @@ CONFIG_SCSI_QLA2XXX=y # # Multi-device support (RAID and LVM) # -# CONFIG_MD is not set +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support # -CONFIG_FUSION=y -CONFIG_FUSION_MAX_SGE=40 -# CONFIG_FUSION_CTL is not set +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support @@ -430,75 +527,8 @@ CONFIG_FUSION_MAX_SGE=40 # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -CONFIG_IP_TCPDIAG_IPV6=y -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) +# Network device support # -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -517,7 +547,9 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=y +# CONFIG_TYPHOON is not set # # Tulip family network device support @@ -532,7 +564,7 @@ CONFIG_NET_PCI=y CONFIG_FORCEDETH=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set +CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -553,14 +585,15 @@ CONFIG_8139TOO=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -647,7 +680,6 @@ CONFIG_SERIO_I8042=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -716,6 +748,7 @@ CONFIG_MAX_RAW_DEVS=256 # I2C support # # CONFIG_I2C is not set +# CONFIG_I2C_SENSOR is not set # # Dallas's 1-wire bus @@ -723,6 +756,12 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_W1 is not set # +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_DEBUG_CHIP is not set + +# # Misc devices # # CONFIG_IBM_ASM is not set @@ -808,6 +847,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -846,12 +886,15 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set # # USB Imaging devices @@ -902,10 +945,11 @@ CONFIG_USB_MON=y # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -924,6 +968,10 @@ CONFIG_USB_MON=y # CONFIG_INFINIBAND is not set # +# SN Devices +# + +# # Firmware Drivers # # CONFIG_EDD is not set @@ -935,6 +983,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -957,6 +1006,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y @@ -986,7 +1036,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set @@ -1016,15 +1065,18 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set diff --git a/arch/x86_64/ia32/Makefile b/arch/x86_64/ia32/Makefile index a12b19da4b59..f76217d8f579 100644 --- a/arch/x86_64/ia32/Makefile +++ b/arch/x86_64/ia32/Makefile @@ -4,14 +4,14 @@ obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_ioctl.o \ ia32_signal.o tls32.o \ - ia32_binfmt.o fpu32.o ptrace32.o syscall32.o + ia32_binfmt.o fpu32.o ptrace32.o syscall32.o syscall32_syscall.o sysv-$(CONFIG_SYSVIPC) := ipc32.o obj-$(CONFIG_IA32_EMULATION) += $(sysv-y) obj-$(CONFIG_IA32_AOUT) += ia32_aout.o -$(obj)/syscall32.o: $(src)/syscall32.c \ +$(obj)/syscall32_syscall.o: \ $(foreach F,sysenter syscall,$(obj)/vsyscall-$F.so) # Teach kbuild about targets diff --git a/arch/x86_64/ia32/ia32_aout.c b/arch/x86_64/ia32/ia32_aout.c index c12edf5d97f0..3e6780fa0186 100644 --- a/arch/x86_64/ia32/ia32_aout.c +++ b/arch/x86_64/ia32/ia32_aout.c @@ -42,7 +42,7 @@ extern int ia32_setup_arg_pages(struct linux_binprm *bprm, static int load_aout_binary(struct linux_binprm *, struct pt_regs * regs); static int load_aout_library(struct file*); -#if CORE_DUMP +#ifdef CORE_DUMP static int aout_core_dump(long signr, struct pt_regs * regs, struct file *file); /* @@ -103,7 +103,7 @@ static struct linux_binfmt aout_format = { .module = THIS_MODULE, .load_binary = load_aout_binary, .load_shlib = load_aout_library, -#if CORE_DUMP +#ifdef CORE_DUMP .core_dump = aout_core_dump, #endif .min_coredump = PAGE_SIZE @@ -120,7 +120,7 @@ static void set_brk(unsigned long start, unsigned long end) up_write(¤t->mm->mmap_sem); } -#if CORE_DUMP +#ifdef CORE_DUMP /* * These are the only things you should do on a core-file: use only these * macros to write out all the necessary info. diff --git a/arch/x86_64/ia32/ia32_signal.c b/arch/x86_64/ia32/ia32_signal.c index fbd09b5126ce..66e2821533db 100644 --- a/arch/x86_64/ia32/ia32_signal.c +++ b/arch/x86_64/ia32/ia32_signal.c @@ -428,8 +428,8 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size) return (void __user *)((rsp - frame_size) & -8UL); } -void ia32_setup_frame(int sig, struct k_sigaction *ka, - compat_sigset_t *set, struct pt_regs * regs) +int ia32_setup_frame(int sig, struct k_sigaction *ka, + compat_sigset_t *set, struct pt_regs * regs) { struct sigframe __user *frame; int err = 0; @@ -514,14 +514,15 @@ void ia32_setup_frame(int sig, struct k_sigaction *ka, current->comm, current->pid, frame, regs->rip, frame->pretcode); #endif - return; + return 1; give_sigsegv: force_sigsegv(sig, current); + return 0; } -void ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, - compat_sigset_t *set, struct pt_regs * regs) +int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + compat_sigset_t *set, struct pt_regs * regs) { struct rt_sigframe __user *frame; int err = 0; @@ -613,9 +614,9 @@ void ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, current->comm, current->pid, frame, regs->rip, frame->pretcode); #endif - return; + return 1; give_sigsegv: force_sigsegv(sig, current); + return 0; } - diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S index f3ca0db85b5b..c45d6a05b984 100644 --- a/arch/x86_64/ia32/ia32entry.S +++ b/arch/x86_64/ia32/ia32entry.S @@ -589,13 +589,17 @@ ia32_sys_call_table: .quad compat_sys_mq_timedreceive /* 280 */ .quad compat_sys_mq_notify .quad compat_sys_mq_getsetattr - .quad quiet_ni_syscall /* reserved for kexec */ + .quad compat_sys_kexec_load /* reserved for kexec */ .quad compat_sys_waitid - .quad quiet_ni_syscall /* sys_altroot */ + .quad quiet_ni_syscall /* 285: sys_altroot */ .quad sys_add_key .quad sys_request_key .quad sys_keyctl - /* don't forget to change IA32_NR_syscalls */ + .quad sys_ioprio_set + .quad sys_ioprio_get /* 290 */ + .quad sys_inotify_init + .quad sys_inotify_add_watch + .quad sys_inotify_rm_watch ia32_syscall_end: .rept IA32_NR_syscalls-(ia32_syscall_end-ia32_sys_call_table)/8 .quad ni_syscall diff --git a/arch/x86_64/ia32/ptrace32.c b/arch/x86_64/ia32/ptrace32.c index b98b6d2462f6..2a925e2af390 100644 --- a/arch/x86_64/ia32/ptrace32.c +++ b/arch/x86_64/ia32/ptrace32.c @@ -43,11 +43,11 @@ static int putreg32(struct task_struct *child, unsigned regno, u32 val) switch (regno) { case offsetof(struct user32, regs.fs): if (val && (val & 3) != 3) return -EIO; - child->thread.fs = val & 0xffff; + child->thread.fsindex = val & 0xffff; break; case offsetof(struct user32, regs.gs): if (val && (val & 3) != 3) return -EIO; - child->thread.gs = val & 0xffff; + child->thread.gsindex = val & 0xffff; break; case offsetof(struct user32, regs.ds): if (val && (val & 3) != 3) return -EIO; @@ -138,10 +138,10 @@ static int getreg32(struct task_struct *child, unsigned regno, u32 *val) switch (regno) { case offsetof(struct user32, regs.fs): - *val = child->thread.fs; + *val = child->thread.fsindex; break; case offsetof(struct user32, regs.gs): - *val = child->thread.gs; + *val = child->thread.gsindex; break; case offsetof(struct user32, regs.ds): *val = child->thread.ds; diff --git a/arch/x86_64/ia32/sys_ia32.c b/arch/x86_64/ia32/sys_ia32.c index 68a9ab06ee7c..be996d1b691e 100644 --- a/arch/x86_64/ia32/sys_ia32.c +++ b/arch/x86_64/ia32/sys_ia32.c @@ -61,6 +61,7 @@ #include <linux/ptrace.h> #include <linux/highuid.h> #include <linux/vmalloc.h> +#include <linux/fsnotify.h> #include <asm/mman.h> #include <asm/types.h> #include <asm/uaccess.h> @@ -984,8 +985,10 @@ asmlinkage long sys32_open(const char __user * filename, int flags, int mode) if (IS_ERR(f)) { put_unused_fd(fd); fd = error; - } else + } else { + fsnotify_open(f->f_dentry); fd_install(fd, f); + } } putname(tmp); } diff --git a/arch/x86_64/ia32/syscall32.c b/arch/x86_64/ia32/syscall32.c index 01d8db1a1c09..adbc5f8089e9 100644 --- a/arch/x86_64/ia32/syscall32.c +++ b/arch/x86_64/ia32/syscall32.c @@ -14,16 +14,6 @@ #include <asm/tlbflush.h> #include <asm/ia32_unistd.h> -/* 32bit VDSOs mapped into user space. */ -asm(".section \".init.data\",\"aw\"\n" - "syscall32_syscall:\n" - ".incbin \"arch/x86_64/ia32/vsyscall-syscall.so\"\n" - "syscall32_syscall_end:\n" - "syscall32_sysenter:\n" - ".incbin \"arch/x86_64/ia32/vsyscall-sysenter.so\"\n" - "syscall32_sysenter_end:\n" - ".previous"); - extern unsigned char syscall32_syscall[], syscall32_syscall_end[]; extern unsigned char syscall32_sysenter[], syscall32_sysenter_end[]; extern int sysctl_vsyscall32; @@ -57,6 +47,7 @@ int syscall32_setup_pages(struct linux_binprm *bprm, int exstack) int npages = (VSYSCALL32_END - VSYSCALL32_BASE) >> PAGE_SHIFT; struct vm_area_struct *vma; struct mm_struct *mm = current->mm; + int ret; vma = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL); if (!vma) @@ -78,7 +69,11 @@ int syscall32_setup_pages(struct linux_binprm *bprm, int exstack) vma->vm_mm = mm; down_write(&mm->mmap_sem); - insert_vm_struct(mm, vma); + if ((ret = insert_vm_struct(mm, vma))) { + up_write(&mm->mmap_sem); + kmem_cache_free(vm_area_cachep, vma); + return ret; + } mm->total_vm += npages; up_write(&mm->mmap_sem); return 0; diff --git a/arch/x86_64/ia32/syscall32_syscall.S b/arch/x86_64/ia32/syscall32_syscall.S new file mode 100644 index 000000000000..8f8271bdf135 --- /dev/null +++ b/arch/x86_64/ia32/syscall32_syscall.S @@ -0,0 +1,17 @@ +/* 32bit VDSOs mapped into user space. */ + + .section ".init.data","aw" + + .globl syscall32_syscall + .globl syscall32_syscall_end + +syscall32_syscall: + .incbin "arch/x86_64/ia32/vsyscall-syscall.so" +syscall32_syscall_end: + + .globl syscall32_sysenter + .globl syscall32_sysenter_end + +syscall32_sysenter: + .incbin "arch/x86_64/ia32/vsyscall-sysenter.so" +syscall32_sysenter_end: diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index 5ca4a4598fda..48f9e2c19cd6 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_SMP) += smp.o smpboot.o trampoline.o obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o obj-$(CONFIG_X86_IO_APIC) += io_apic.o mpparse.o \ genapic.o genapic_cluster.o genapic_flat.o +obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o obj-$(CONFIG_PM) += suspend.o obj-$(CONFIG_SOFTWARE_SUSPEND) += suspend_asm.o obj-$(CONFIG_CPU_FREQ) += cpufreq/ diff --git a/arch/x86_64/kernel/acpi/wakeup.S b/arch/x86_64/kernel/acpi/wakeup.S index a4c630034cd4..185faa911db5 100644 --- a/arch/x86_64/kernel/acpi/wakeup.S +++ b/arch/x86_64/kernel/acpi/wakeup.S @@ -67,7 +67,7 @@ wakeup_code: shll $4, %eax addl $(gdta - wakeup_code), %eax movl %eax, gdt_48a +2 - wakeup_code - lgdt %ds:gdt_48a - wakeup_code # load gdt with whatever is + lgdtl %ds:gdt_48a - wakeup_code # load gdt with whatever is # appropriate movl $1, %eax # protected mode (PE) bit diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c index 504e63474993..c9a6b812e926 100644 --- a/arch/x86_64/kernel/aperture.c +++ b/arch/x86_64/kernel/aperture.c @@ -40,11 +40,7 @@ int fix_aperture __initdata = 1; static u32 __init allocate_aperture(void) { -#ifdef CONFIG_DISCONTIGMEM pg_data_t *nd0 = NODE_DATA(0); -#else - pg_data_t *nd0 = &contig_page_data; -#endif u32 aper_size; void *p; diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index f8e6cc4fecd4..375d369570ca 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -133,7 +133,7 @@ void __init connect_bsp_APIC(void) } } -void disconnect_bsp_APIC(void) +void disconnect_bsp_APIC(int virt_wire_setup) { if (pic_mode) { /* @@ -146,6 +146,42 @@ void disconnect_bsp_APIC(void) outb(0x70, 0x22); outb(0x00, 0x23); } + else { + /* Go back to Virtual Wire compatibility mode */ + unsigned long value; + + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write_around(APIC_SPIV, value); + + if (!virt_wire_setup) { + /* For LVT0 make it edge triggered, active high, external and enabled */ + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write_around(APIC_LVT0, value); + } + else { + /* Disable LVT0 */ + apic_write_around(APIC_LVT0, APIC_LVT_MASKED); + } + + /* For LVT1 make it edge triggered, active high, nmi and enabled */ + value = apic_read(APIC_LVT1); + value &= ~( + APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write_around(APIC_LVT1, value); + } } void disable_local_APIC(void) @@ -285,7 +321,7 @@ void __init init_bsp_APIC(void) apic_write_around(APIC_LVT1, value); } -void __init setup_local_APIC (void) +void __cpuinit setup_local_APIC (void) { unsigned int value, ver, maxlvt; @@ -534,7 +570,7 @@ static struct sys_device device_lapic = { .cls = &lapic_sysclass, }; -static void __init apic_pm_activate(void) +static void __cpuinit apic_pm_activate(void) { apic_pm_state.active = 1; } @@ -774,14 +810,14 @@ void __init setup_boot_APIC_clock (void) local_irq_enable(); } -void __init setup_secondary_APIC_clock(void) +void __cpuinit setup_secondary_APIC_clock(void) { local_irq_disable(); /* FIXME: Do we need this? --RR */ setup_APIC_timer(calibration_result); local_irq_enable(); } -void __init disable_APIC_timer(void) +void __cpuinit disable_APIC_timer(void) { if (using_apic_timer) { unsigned long v; diff --git a/arch/x86_64/kernel/crash.c b/arch/x86_64/kernel/crash.c new file mode 100644 index 000000000000..d7fa4248501c --- /dev/null +++ b/arch/x86_64/kernel/crash.c @@ -0,0 +1,35 @@ +/* + * Architecture specific (x86_64) functions for kexec based crash dumps. + * + * Created by: Hariprasad Nellitheertha (hari@in.ibm.com) + * + * Copyright (C) IBM Corporation, 2004. All rights reserved. + * + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/irq.h> +#include <linux/reboot.h> +#include <linux/kexec.h> + +#include <asm/processor.h> +#include <asm/hardirq.h> +#include <asm/nmi.h> +#include <asm/hw_irq.h> + +note_buf_t crash_notes[NR_CPUS]; + +void machine_crash_shutdown(struct pt_regs *regs) +{ + /* This function is only called after the system + * has paniced or is otherwise in a critical state. + * The minimum amount of code to allow a kexec'd kernel + * to run successfully needs to happen here. + * + * In practice this means shooting down the other cpus in + * an SMP system. + */ +} diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index 7c154dfff64a..6ded3a50dfe6 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -16,6 +16,7 @@ #include <linux/bootmem.h> #include <linux/ioport.h> #include <linux/string.h> +#include <linux/kexec.h> #include <asm/page.h> #include <asm/e820.h> #include <asm/proto.h> @@ -191,8 +192,6 @@ void __init e820_reserve_resources(void) int i; for (i = 0; i < e820.nr_map; i++) { struct resource *res; - if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL) - continue; res = alloc_bootmem_low(sizeof(struct resource)); switch (e820.map[i].type) { case E820_RAM: res->name = "System RAM"; break; @@ -212,6 +211,9 @@ void __init e820_reserve_resources(void) */ request_resource(res, &code_resource); request_resource(res, &data_resource); +#ifdef CONFIG_KEXEC + request_resource(res, &crashk_res); +#endif } } } diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c index e3a19e8ebbf8..9631c747c5e3 100644 --- a/arch/x86_64/kernel/early_printk.c +++ b/arch/x86_64/kernel/early_printk.c @@ -2,20 +2,24 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/string.h> +#include <linux/tty.h> #include <asm/io.h> #include <asm/processor.h> /* Simple VGA output */ #ifdef __i386__ +#include <asm/setup.h> #define VGABASE (__ISA_IO_base + 0xb8000) #else +#include <asm/bootsetup.h> #define VGABASE ((void __iomem *)0xffffffff800b8000UL) #endif -#define MAX_YPOS 25 -#define MAX_XPOS 80 +#define MAX_YPOS max_ypos +#define MAX_XPOS max_xpos +static int max_ypos = 25, max_xpos = 80; static int current_ypos = 1, current_xpos = 0; static void early_vga_write(struct console *con, const char *str, unsigned n) @@ -196,7 +200,10 @@ int __init setup_early_printk(char *opt) } else if (!strncmp(buf, "ttyS", 4)) { early_serial_init(buf); early_console = &early_serial_console; - } else if (!strncmp(buf, "vga", 3)) { + } else if (!strncmp(buf, "vga", 3) + && SCREEN_INFO.orig_video_isVGA == 1) { + max_xpos = SCREEN_INFO.orig_video_cols; + max_ypos = SCREEN_INFO.orig_video_lines; early_console = &early_vga_console; } early_console_initialized = 1; diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S index 28817490fdc6..096d470e280f 100644 --- a/arch/x86_64/kernel/entry.S +++ b/arch/x86_64/kernel/entry.S @@ -76,7 +76,7 @@ .macro FAKE_STACK_FRAME child_rip /* push in order ss, rsp, eflags, cs, rip */ - xorq %rax, %rax + xorl %eax, %eax pushq %rax /* ss */ CFI_ADJUST_CFA_OFFSET 8 pushq %rax /* rsp */ @@ -423,7 +423,7 @@ ENTRY(stub_rt_sigreturn) testl $3,CS(%rdi) je 1f swapgs -1: addl $1,%gs:pda_irqcount # RED-PEN should check preempt count +1: incl %gs:pda_irqcount # RED-PEN should check preempt count movq %gs:pda_irqstackptr,%rax cmoveq %rax,%rsp pushq %rdi # save old stack @@ -436,7 +436,7 @@ ENTRY(common_interrupt) ret_from_intr: popq %rdi cli - subl $1,%gs:pda_irqcount + decl %gs:pda_irqcount #ifdef CONFIG_DEBUG_INFO movq RBP(%rdi),%rbp #endif @@ -494,7 +494,7 @@ retint_signal: sti SAVE_REST movq $-1,ORIG_RAX(%rsp) - xorq %rsi,%rsi # oldset + xorl %esi,%esi # oldset movq %rsp,%rdi # &pt_regs call do_notify_resume RESTORE_REST @@ -752,7 +752,7 @@ child_rip: movq %rsi, %rdi call *%rax # exit - xorq %rdi, %rdi + xorl %edi, %edi call do_exit /* @@ -918,3 +918,15 @@ ENTRY(machine_check) ENTRY(call_debug) zeroentry do_call_debug +ENTRY(call_softirq) + movq %gs:pda_irqstackptr,%rax + pushq %r15 + movq %rsp,%r15 + incl %gs:pda_irqcount + cmove %rax,%rsp + call __do_softirq + movq %r15,%rsp + decl %gs:pda_irqcount + popq %r15 + ret + diff --git a/arch/x86_64/kernel/genapic.c b/arch/x86_64/kernel/genapic.c index 69b9c25a8fc4..30c843a5efdd 100644 --- a/arch/x86_64/kernel/genapic.c +++ b/arch/x86_64/kernel/genapic.c @@ -31,6 +31,7 @@ u8 x86_cpu_to_log_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; extern struct genapic apic_cluster; extern struct genapic apic_flat; +extern struct genapic apic_physflat; struct genapic *genapic = &apic_flat; @@ -44,12 +45,7 @@ void __init clustered_apic_check(void) u8 clusters, max_cluster; u8 id; u8 cluster_cnt[NUM_APIC_CLUSTERS]; - - if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) { - /* AMD always uses flat mode right now */ - genapic = &apic_flat; - goto print; - } + int num_cpus = 0; #if defined(CONFIG_ACPI_BUS) /* @@ -64,15 +60,34 @@ void __init clustered_apic_check(void) #endif memset(cluster_cnt, 0, sizeof(cluster_cnt)); - for (i = 0; i < NR_CPUS; i++) { id = bios_cpu_apicid[i]; - if (id != BAD_APICID) - cluster_cnt[APIC_CLUSTERID(id)]++; + if (id == BAD_APICID) + continue; + num_cpus++; + cluster_cnt[APIC_CLUSTERID(id)]++; } + /* Don't use clustered mode on AMD platforms. */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) { + genapic = &apic_physflat; +#ifndef CONFIG_CPU_HOTPLUG + /* In the CPU hotplug case we cannot use broadcast mode + because that opens a race when a CPU is removed. + Stay at physflat mode in this case. + It is bad to do this unconditionally though. Once + we have ACPI platform support for CPU hotplug + we should detect hotplug capablity from ACPI tables and + only do this when really needed. -AK */ + if (num_cpus <= 8) + genapic = &apic_flat; +#endif + goto print; + } + clusters = 0; max_cluster = 0; + for (i = 0; i < NUM_APIC_CLUSTERS; i++) { if (cluster_cnt[i] > 0) { ++clusters; diff --git a/arch/x86_64/kernel/genapic_flat.c b/arch/x86_64/kernel/genapic_flat.c index b4cbbad04226..adc96282a9e2 100644 --- a/arch/x86_64/kernel/genapic_flat.c +++ b/arch/x86_64/kernel/genapic_flat.c @@ -2,7 +2,7 @@ * Copyright 2004 James Cleverdon, IBM. * Subject to the GNU Public License, v.2 * - * Flat APIC subarch code. Maximum 8 CPUs, logical delivery. + * Flat APIC subarch code. * * Hacked for x86-64 by James Cleverdon from i386 architecture code by * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and @@ -18,7 +18,6 @@ #include <asm/smp.h> #include <asm/ipi.h> - static cpumask_t flat_target_cpus(void) { return cpu_online_map; @@ -45,22 +44,6 @@ static void flat_init_apic_ldr(void) apic_write_around(APIC_LDR, val); } -static void flat_send_IPI_allbutself(int vector) -{ - /* - * if there are no other CPUs in the system then - * we get an APIC send error if we try to broadcast. - * thus we have to avoid sending IPIs in this case. - */ - if (num_online_cpus() > 1) - __send_IPI_shortcut(APIC_DEST_ALLBUT, vector, APIC_DEST_LOGICAL); -} - -static void flat_send_IPI_all(int vector) -{ - __send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL); -} - static void flat_send_IPI_mask(cpumask_t cpumask, int vector) { unsigned long mask = cpus_addr(cpumask)[0]; @@ -93,6 +76,17 @@ static void flat_send_IPI_mask(cpumask_t cpumask, int vector) local_irq_restore(flags); } +static void flat_send_IPI_allbutself(int vector) +{ + if (((num_online_cpus()) - 1) >= 1) + __send_IPI_shortcut(APIC_DEST_ALLBUT, vector,APIC_DEST_LOGICAL); +} + +static void flat_send_IPI_all(int vector) +{ + __send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL); +} + static int flat_apic_id_registered(void) { return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map); @@ -125,3 +119,63 @@ struct genapic apic_flat = { .cpu_mask_to_apicid = flat_cpu_mask_to_apicid, .phys_pkg_id = phys_pkg_id, }; + +/* + * Physflat mode is used when there are more than 8 CPUs on a AMD system. + * We cannot use logical delivery in this case because the mask + * overflows, so use physical mode. + */ + +static cpumask_t physflat_target_cpus(void) +{ + return cpumask_of_cpu(0); +} + +static void physflat_send_IPI_mask(cpumask_t cpumask, int vector) +{ + send_IPI_mask_sequence(cpumask, vector); +} + +static void physflat_send_IPI_allbutself(int vector) +{ + cpumask_t allbutme = cpu_online_map; + int me = get_cpu(); + cpu_clear(me, allbutme); + physflat_send_IPI_mask(allbutme, vector); + put_cpu(); +} + +static void physflat_send_IPI_all(int vector) +{ + physflat_send_IPI_mask(cpu_online_map, vector); +} + +static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask) +{ + int cpu; + + /* + * We're using fixed IRQ delivery, can only return one phys APIC ID. + * May as well be the first. + */ + cpu = first_cpu(cpumask); + if ((unsigned)cpu < NR_CPUS) + return x86_cpu_to_apicid[cpu]; + else + return BAD_APICID; +} + +struct genapic apic_physflat = { + .name = "physical flat", + .int_delivery_mode = dest_LowestPrio, + .int_dest_mode = (APIC_DEST_PHYSICAL != 0), + .int_delivery_dest = APIC_DEST_PHYSICAL | APIC_DM_LOWEST, + .target_cpus = physflat_target_cpus, + .apic_id_registered = flat_apic_id_registered, + .init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/ + .send_IPI_all = physflat_send_IPI_all, + .send_IPI_allbutself = physflat_send_IPI_allbutself, + .send_IPI_mask = physflat_send_IPI_mask, + .cpu_mask_to_apicid = physflat_cpu_mask_to_apicid, + .phys_pkg_id = phys_pkg_id, +}; diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index 9bd2e7a4b81e..98ff5eb32b9a 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -137,14 +137,14 @@ startup_64: wrmsr /* Setup cr0 */ - xorq %rax, %rax - btsq $31, %rax /* Enable paging */ - btsq $0, %rax /* Enable protected mode */ - btsq $1, %rax /* Enable MP */ - btsq $4, %rax /* Enable ET */ - btsq $5, %rax /* Enable NE */ - btsq $16, %rax /* Enable WP */ - btsq $18, %rax /* Enable AM */ +#define CR0_PM 1 /* protected mode */ +#define CR0_MP (1<<1) +#define CR0_ET (1<<4) +#define CR0_NE (1<<5) +#define CR0_WP (1<<16) +#define CR0_AM (1<<18) +#define CR0_PAGING (1<<31) + movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax /* Make changes effective */ movq %rax, %cr0 @@ -248,23 +248,23 @@ ENTRY(_stext) */ .org 0x1000 ENTRY(init_level4_pgt) - .quad 0x0000000000102007 /* -> level3_ident_pgt */ + .quad 0x0000000000002007 + __PHYSICAL_START /* -> level3_ident_pgt */ .fill 255,8,0 - .quad 0x000000000010a007 + .quad 0x000000000000a007 + __PHYSICAL_START .fill 254,8,0 /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ - .quad 0x0000000000103007 /* -> level3_kernel_pgt */ + .quad 0x0000000000003007 + __PHYSICAL_START /* -> level3_kernel_pgt */ .org 0x2000 ENTRY(level3_ident_pgt) - .quad 0x0000000000104007 + .quad 0x0000000000004007 + __PHYSICAL_START .fill 511,8,0 .org 0x3000 ENTRY(level3_kernel_pgt) .fill 510,8,0 /* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */ - .quad 0x0000000000105007 /* -> level2_kernel_pgt */ + .quad 0x0000000000005007 + __PHYSICAL_START /* -> level2_kernel_pgt */ .fill 1,8,0 .org 0x4000 @@ -337,17 +337,17 @@ ENTRY(empty_bad_pmd_table) .org 0xa000 ENTRY(level3_physmem_pgt) - .quad 0x0000000000105007 /* -> level2_kernel_pgt (so that __va works even before pagetable_init) */ + .quad 0x0000000000005007 + __PHYSICAL_START /* -> level2_kernel_pgt (so that __va works even before pagetable_init) */ .org 0xb000 #ifdef CONFIG_ACPI_SLEEP ENTRY(wakeup_level4_pgt) - .quad 0x0000000000102007 /* -> level3_ident_pgt */ + .quad 0x0000000000002007 + __PHYSICAL_START /* -> level3_ident_pgt */ .fill 255,8,0 - .quad 0x000000000010a007 + .quad 0x000000000000a007 + __PHYSICAL_START .fill 254,8,0 /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ - .quad 0x0000000000103007 /* -> level3_kernel_pgt */ + .quad 0x0000000000003007 + __PHYSICAL_START /* -> level3_kernel_pgt */ #endif .data diff --git a/arch/x86_64/kernel/head64.c b/arch/x86_64/kernel/head64.c index 0f8c78dcd38c..cf6ab147a2a5 100644 --- a/arch/x86_64/kernel/head64.c +++ b/arch/x86_64/kernel/head64.c @@ -94,7 +94,7 @@ void __init x86_64_start_kernel(char * real_mode_data) s = strstr(saved_command_line, "earlyprintk="); if (s != NULL) setup_early_printk(s); -#ifdef CONFIG_DISCONTIGMEM +#ifdef CONFIG_NUMA s = strstr(saved_command_line, "numa="); if (s != NULL) numa_setup(s+5); diff --git a/arch/x86_64/kernel/i387.c b/arch/x86_64/kernel/i387.c index ba139cac57ce..d9b22b633e39 100644 --- a/arch/x86_64/kernel/i387.c +++ b/arch/x86_64/kernel/i387.c @@ -42,7 +42,7 @@ void mxcsr_feature_mask_init(void) * Called at bootup to set up the initial FPU state that is later cloned * into all processes. */ -void __init fpu_init(void) +void __cpuinit fpu_init(void) { unsigned long oldcr0 = read_cr0(); extern void __bad_fxsave_alignment(void); diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c index 7873d9ba8814..a89169095129 100644 --- a/arch/x86_64/kernel/i8259.c +++ b/arch/x86_64/kernel/i8259.c @@ -157,14 +157,13 @@ static unsigned int startup_8259A_irq(unsigned int irq) } static struct hw_interrupt_type i8259A_irq_type = { - "XT-PIC", - startup_8259A_irq, - shutdown_8259A_irq, - enable_8259A_irq, - disable_8259A_irq, - mask_and_ack_8259A, - end_8259A_irq, - NULL + .typename = "XT-PIC", + .startup = startup_8259A_irq, + .shutdown = shutdown_8259A_irq, + .enable = enable_8259A_irq, + .disable = disable_8259A_irq, + .ack = mask_and_ack_8259A, + .end = end_8259A_irq, }; /* @@ -415,10 +414,22 @@ static int i8259A_suspend(struct sys_device *dev, pm_message_t state) return 0; } +static int i8259A_shutdown(struct sys_device *dev) +{ + /* Put the i8259A into a quiescent state that + * the kernel initialization code can get it + * out of. + */ + outb(0xff, 0x21); /* mask all of 8259A-1 */ + outb(0xff, 0xA1); /* mask all of 8259A-1 */ + return 0; +} + static struct sysdev_class i8259_sysdev_class = { set_kset_name("i8259"), .suspend = i8259A_suspend, .resume = i8259A_resume, + .shutdown = i8259A_shutdown, }; static struct sys_device device_i8259A = { diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index afd87e64d0a8..d206d7e49cf5 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -330,7 +330,7 @@ static int find_irq_entry(int apic, int pin, int type) /* * Find the pin to which IRQ[irq] (ISA) is connected */ -static int __init find_isa_irq_pin(int irq, int type) +static int find_isa_irq_pin(int irq, int type) { int i; @@ -1064,7 +1064,6 @@ void print_all_local_APICs (void) void __apicdebuginit print_PIC(void) { - extern spinlock_t i8259A_lock; unsigned int v; unsigned long flags; @@ -1132,12 +1131,44 @@ static void __init enable_IO_APIC(void) */ void disable_IO_APIC(void) { + int pin; /* * Clear the IO-APIC before rebooting: */ clear_IO_APIC(); - disconnect_bsp_APIC(); + /* + * If the i82559 is routed through an IOAPIC + * Put that IOAPIC in virtual wire mode + * so legacy interrups can be delivered. + */ + pin = find_isa_irq_pin(0, mp_ExtINT); + if (pin != -1) { + struct IO_APIC_route_entry entry; + unsigned long flags; + + memset(&entry, 0, sizeof(entry)); + entry.mask = 0; /* Enabled */ + entry.trigger = 0; /* Edge */ + entry.irr = 0; + entry.polarity = 0; /* High */ + entry.delivery_status = 0; + entry.dest_mode = 0; /* Physical */ + entry.delivery_mode = 7; /* ExtInt */ + entry.vector = 0; + entry.dest.physical.physical_dest = 0; + + + /* + * Add it to the IO-APIC irq-routing table: + */ + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1)); + io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0)); + spin_unlock_irqrestore(&ioapic_lock, flags); + } + + disconnect_bsp_APIC(pin != -1); } /* diff --git a/arch/x86_64/kernel/irq.c b/arch/x86_64/kernel/irq.c index 62b112e4deb4..849a20aec7ca 100644 --- a/arch/x86_64/kernel/irq.c +++ b/arch/x86_64/kernel/irq.c @@ -14,6 +14,7 @@ #include <linux/interrupt.h> #include <linux/seq_file.h> #include <linux/module.h> +#include <linux/delay.h> #include <asm/uaccess.h> #include <asm/io_apic.h> @@ -106,3 +107,50 @@ asmlinkage unsigned int do_IRQ(struct pt_regs *regs) return 1; } +#ifdef CONFIG_HOTPLUG_CPU +void fixup_irqs(cpumask_t map) +{ + unsigned int irq; + static int warned; + + for (irq = 0; irq < NR_IRQS; irq++) { + cpumask_t mask; + if (irq == 2) + continue; + + cpus_and(mask, irq_affinity[irq], map); + if (any_online_cpu(mask) == NR_CPUS) { + printk("Breaking affinity for irq %i\n", irq); + mask = map; + } + if (irq_desc[irq].handler->set_affinity) + irq_desc[irq].handler->set_affinity(irq, mask); + else if (irq_desc[irq].action && !(warned++)) + printk("Cannot set affinity for irq %i\n", irq); + } + + /* That doesn't seem sufficient. Give it 1ms. */ + local_irq_enable(); + mdelay(1); + local_irq_disable(); +} +#endif + +extern void call_softirq(void); + +asmlinkage void do_softirq(void) +{ + __u32 pending; + unsigned long flags; + + if (in_interrupt()) + return; + + local_irq_save(flags); + pending = local_softirq_pending(); + /* Switch to interrupt stack */ + if (pending) + call_softirq(); + local_irq_restore(flags); +} +EXPORT_SYMBOL(do_softirq); diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index f77f8a0ff187..5c6dc7051482 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -27,6 +27,8 @@ * <prasanna@in.ibm.com> adapted for x86_64 * 2005-Mar Roland McGrath <roland@redhat.com> * Fixed to handle %rip-relative addressing mode correctly. + * 2005-May Rusty Lynch <rusty.lynch@intel.com> + * Added function return probes functionality */ #include <linux/config.h> @@ -36,23 +38,19 @@ #include <linux/string.h> #include <linux/slab.h> #include <linux/preempt.h> -#include <linux/moduleloader.h> +#include <asm/cacheflush.h> #include <asm/pgtable.h> #include <asm/kdebug.h> static DECLARE_MUTEX(kprobe_mutex); -/* kprobe_status settings */ -#define KPROBE_HIT_ACTIVE 0x00000001 -#define KPROBE_HIT_SS 0x00000002 - static struct kprobe *current_kprobe; static unsigned long kprobe_status, kprobe_old_rflags, kprobe_saved_rflags; +static struct kprobe *kprobe_prev; +static unsigned long kprobe_status_prev, kprobe_old_rflags_prev, kprobe_saved_rflags_prev; static struct pt_regs jprobe_saved_regs; static long *jprobe_saved_rsp; -static kprobe_opcode_t *get_insn_slot(void); -static void free_insn_slot(kprobe_opcode_t *slot); void jprobe_return_end(void); /* copy of the kernel stack at the probe fire time */ @@ -214,6 +212,21 @@ void arch_copy_kprobe(struct kprobe *p) BUG_ON((s64) (s32) disp != disp); /* Sanity check. */ *ripdisp = disp; } + p->opcode = *p->addr; +} + +void arch_arm_kprobe(struct kprobe *p) +{ + *p->addr = BREAKPOINT_INSTRUCTION; + flush_icache_range((unsigned long) p->addr, + (unsigned long) p->addr + sizeof(kprobe_opcode_t)); +} + +void arch_disarm_kprobe(struct kprobe *p) +{ + *p->addr = p->opcode; + flush_icache_range((unsigned long) p->addr, + (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } void arch_remove_kprobe(struct kprobe *p) @@ -223,10 +236,29 @@ void arch_remove_kprobe(struct kprobe *p) down(&kprobe_mutex); } -static inline void disarm_kprobe(struct kprobe *p, struct pt_regs *regs) +static inline void save_previous_kprobe(void) { - *p->addr = p->opcode; - regs->rip = (unsigned long)p->addr; + kprobe_prev = current_kprobe; + kprobe_status_prev = kprobe_status; + kprobe_old_rflags_prev = kprobe_old_rflags; + kprobe_saved_rflags_prev = kprobe_saved_rflags; +} + +static inline void restore_previous_kprobe(void) +{ + current_kprobe = kprobe_prev; + kprobe_status = kprobe_status_prev; + kprobe_old_rflags = kprobe_old_rflags_prev; + kprobe_saved_rflags = kprobe_saved_rflags_prev; +} + +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) +{ + current_kprobe = p; + kprobe_saved_rflags = kprobe_old_rflags + = (regs->eflags & (TF_MASK | IF_MASK)); + if (is_IF_modifier(p->ainsn.insn)) + kprobe_saved_rflags &= ~IF_MASK; } static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) @@ -240,6 +272,25 @@ static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->rip = (unsigned long)p->ainsn.insn; } +void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) +{ + unsigned long *sara = (unsigned long *)regs->rsp; + struct kretprobe_instance *ri; + + if ((ri = get_free_rp_inst(rp)) != NULL) { + ri->rp = rp; + ri->task = current; + ri->ret_addr = (kprobe_opcode_t *) *sara; + + /* Replace the return addr with trampoline addr */ + *sara = (unsigned long) &kretprobe_trampoline; + + add_rp_inst(ri); + } else { + rp->nmissed++; + } +} + /* * Interrupts are disabled on entry as trap3 is an interrupt gate and they * remain disabled thorough out this function. @@ -264,9 +315,30 @@ int kprobe_handler(struct pt_regs *regs) regs->eflags |= kprobe_saved_rflags; unlock_kprobes(); goto no_kprobe; + } else if (kprobe_status == KPROBE_HIT_SSDONE) { + /* TODO: Provide re-entrancy from + * post_kprobes_handler() and avoid exception + * stack corruption while single-stepping on + * the instruction of the new probe. + */ + arch_disarm_kprobe(p); + regs->rip = (unsigned long)p->addr; + ret = 1; + } else { + /* We have reentered the kprobe_handler(), since + * another probe was hit while within the + * handler. We here save the original kprobe + * variables and just single step on instruction + * of the new probe without calling any user + * handlers. + */ + save_previous_kprobe(); + set_current_kprobe(p, regs); + p->nmissed++; + prepare_singlestep(p, regs); + kprobe_status = KPROBE_REENTER; + return 1; } - disarm_kprobe(p, regs); - ret = 1; } else { p = current_kprobe; if (p->break_handler && p->break_handler(p, regs)) { @@ -296,11 +368,7 @@ int kprobe_handler(struct pt_regs *regs) } kprobe_status = KPROBE_HIT_ACTIVE; - current_kprobe = p; - kprobe_saved_rflags = kprobe_old_rflags - = (regs->eflags & (TF_MASK | IF_MASK)); - if (is_IF_modifier(p->ainsn.insn)) - kprobe_saved_rflags &= ~IF_MASK; + set_current_kprobe(p, regs); if (p->pre_handler && p->pre_handler(p, regs)) /* handler has already set things up, so skip ss setup */ @@ -317,6 +385,78 @@ no_kprobe: } /* + * For function-return probes, init_kprobes() establishes a probepoint + * here. When a retprobed function returns, this probe is hit and + * trampoline_probe_handler() runs, calling the kretprobe's handler. + */ + void kretprobe_trampoline_holder(void) + { + asm volatile ( ".global kretprobe_trampoline\n" + "kretprobe_trampoline: \n" + "nop\n"); + } + +/* + * Called when we hit the probe point at kretprobe_trampoline + */ +int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct kretprobe_instance *ri = NULL; + struct hlist_head *head; + struct hlist_node *node, *tmp; + unsigned long orig_ret_address = 0; + unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + + head = kretprobe_inst_table_head(current); + + /* + * It is possible to have multiple instances associated with a given + * task either because an multiple functions in the call path + * have a return probe installed on them, and/or more then one return + * return probe was registered for a target function. + * + * We can handle this because: + * - instances are always inserted at the head of the list + * - when multiple return probes are registered for the same + * function, the first instance's ret_addr will point to the + * real return address, and all the rest will point to + * kretprobe_trampoline + */ + hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { + if (ri->task != current) + /* another task is sharing our hash bucket */ + continue; + + if (ri->rp && ri->rp->handler) + ri->rp->handler(ri, regs); + + orig_ret_address = (unsigned long)ri->ret_addr; + recycle_rp_inst(ri); + + if (orig_ret_address != trampoline_address) + /* + * This is the real return address. Any other + * instances associated with this task are for + * other calls deeper on the call stack + */ + break; + } + + BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); + regs->rip = orig_ret_address; + + unlock_kprobes(); + preempt_enable_no_resched(); + + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we have handled unlocking + * and re-enabling preemption. + */ + return 1; +} + +/* * Called after single-stepping. p->addr is the address of the * instruction whose first byte has been replaced by the "int 3" * instruction. To avoid the SMP problems that can occur when we @@ -401,13 +541,22 @@ int post_kprobe_handler(struct pt_regs *regs) if (!kprobe_running()) return 0; - if (current_kprobe->post_handler) + if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { + kprobe_status = KPROBE_HIT_SSDONE; current_kprobe->post_handler(current_kprobe, regs, 0); + } resume_execution(current_kprobe, regs); regs->eflags |= kprobe_saved_rflags; - unlock_kprobes(); + /* Restore the original saved kprobes variables and continue. */ + if (kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(); + goto out; + } else { + unlock_kprobes(); + } +out: preempt_enable_no_resched(); /* @@ -528,111 +677,12 @@ int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) return 0; } -/* - * kprobe->ainsn.insn points to the copy of the instruction to be single-stepped. - * By default on x86_64, pages we get from kmalloc or vmalloc are not - * executable. Single-stepping an instruction on such a page yields an - * oops. So instead of storing the instruction copies in their respective - * kprobe objects, we allocate a page, map it executable, and store all the - * instruction copies there. (We can allocate additional pages if somebody - * inserts a huge number of probes.) Each page can hold up to INSNS_PER_PAGE - * instruction slots, each of which is MAX_INSN_SIZE*sizeof(kprobe_opcode_t) - * bytes. - */ -#define INSNS_PER_PAGE (PAGE_SIZE/(MAX_INSN_SIZE*sizeof(kprobe_opcode_t))) -struct kprobe_insn_page { - struct hlist_node hlist; - kprobe_opcode_t *insns; /* page of instruction slots */ - char slot_used[INSNS_PER_PAGE]; - int nused; +static struct kprobe trampoline_p = { + .addr = (kprobe_opcode_t *) &kretprobe_trampoline, + .pre_handler = trampoline_probe_handler }; -static struct hlist_head kprobe_insn_pages; - -/** - * get_insn_slot() - Find a slot on an executable page for an instruction. - * We allocate an executable page if there's no room on existing ones. - */ -static kprobe_opcode_t *get_insn_slot(void) -{ - struct kprobe_insn_page *kip; - struct hlist_node *pos; - - hlist_for_each(pos, &kprobe_insn_pages) { - kip = hlist_entry(pos, struct kprobe_insn_page, hlist); - if (kip->nused < INSNS_PER_PAGE) { - int i; - for (i = 0; i < INSNS_PER_PAGE; i++) { - if (!kip->slot_used[i]) { - kip->slot_used[i] = 1; - kip->nused++; - return kip->insns + (i*MAX_INSN_SIZE); - } - } - /* Surprise! No unused slots. Fix kip->nused. */ - kip->nused = INSNS_PER_PAGE; - } - } - - /* All out of space. Need to allocate a new page. Use slot 0.*/ - kip = kmalloc(sizeof(struct kprobe_insn_page), GFP_KERNEL); - if (!kip) { - return NULL; - } - - /* - * For the %rip-relative displacement fixups to be doable, we - * need our instruction copy to be within +/- 2GB of any data it - * might access via %rip. That is, within 2GB of where the - * kernel image and loaded module images reside. So we allocate - * a page in the module loading area. - */ - kip->insns = module_alloc(PAGE_SIZE); - if (!kip->insns) { - kfree(kip); - return NULL; - } - INIT_HLIST_NODE(&kip->hlist); - hlist_add_head(&kip->hlist, &kprobe_insn_pages); - memset(kip->slot_used, 0, INSNS_PER_PAGE); - kip->slot_used[0] = 1; - kip->nused = 1; - return kip->insns; -} - -/** - * free_insn_slot() - Free instruction slot obtained from get_insn_slot(). - */ -static void free_insn_slot(kprobe_opcode_t *slot) +int __init arch_init_kprobes(void) { - struct kprobe_insn_page *kip; - struct hlist_node *pos; - - hlist_for_each(pos, &kprobe_insn_pages) { - kip = hlist_entry(pos, struct kprobe_insn_page, hlist); - if (kip->insns <= slot - && slot < kip->insns+(INSNS_PER_PAGE*MAX_INSN_SIZE)) { - int i = (slot - kip->insns) / MAX_INSN_SIZE; - kip->slot_used[i] = 0; - kip->nused--; - if (kip->nused == 0) { - /* - * Page is no longer in use. Free it unless - * it's the last one. We keep the last one - * so as not to have to set it up again the - * next time somebody inserts a probe. - */ - hlist_del(&kip->hlist); - if (hlist_empty(&kprobe_insn_pages)) { - INIT_HLIST_NODE(&kip->hlist); - hlist_add_head(&kip->hlist, - &kprobe_insn_pages); - } else { - module_free(NULL, kip->insns); - kfree(kip); - } - } - return; - } - } + return register_kprobe(&trampoline_p); } diff --git a/arch/x86_64/kernel/machine_kexec.c b/arch/x86_64/kernel/machine_kexec.c new file mode 100644 index 000000000000..89fab51e20f4 --- /dev/null +++ b/arch/x86_64/kernel/machine_kexec.c @@ -0,0 +1,231 @@ +/* + * machine_kexec.c - handle transition of Linux booting another kernel + * Copyright (C) 2002-2005 Eric Biederman <ebiederm@xmission.com> + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/mm.h> +#include <linux/kexec.h> +#include <linux/string.h> +#include <linux/reboot.h> +#include <asm/pgtable.h> +#include <asm/tlbflush.h> +#include <asm/mmu_context.h> +#include <asm/io.h> + +static void init_level2_page(pmd_t *level2p, unsigned long addr) +{ + unsigned long end_addr; + + addr &= PAGE_MASK; + end_addr = addr + PUD_SIZE; + while (addr < end_addr) { + set_pmd(level2p++, __pmd(addr | __PAGE_KERNEL_LARGE_EXEC)); + addr += PMD_SIZE; + } +} + +static int init_level3_page(struct kimage *image, pud_t *level3p, + unsigned long addr, unsigned long last_addr) +{ + unsigned long end_addr; + int result; + + result = 0; + addr &= PAGE_MASK; + end_addr = addr + PGDIR_SIZE; + while ((addr < last_addr) && (addr < end_addr)) { + struct page *page; + pmd_t *level2p; + + page = kimage_alloc_control_pages(image, 0); + if (!page) { + result = -ENOMEM; + goto out; + } + level2p = (pmd_t *)page_address(page); + init_level2_page(level2p, addr); + set_pud(level3p++, __pud(__pa(level2p) | _KERNPG_TABLE)); + addr += PUD_SIZE; + } + /* clear the unused entries */ + while (addr < end_addr) { + pud_clear(level3p++); + addr += PUD_SIZE; + } +out: + return result; +} + + +static int init_level4_page(struct kimage *image, pgd_t *level4p, + unsigned long addr, unsigned long last_addr) +{ + unsigned long end_addr; + int result; + + result = 0; + addr &= PAGE_MASK; + end_addr = addr + (PTRS_PER_PGD * PGDIR_SIZE); + while ((addr < last_addr) && (addr < end_addr)) { + struct page *page; + pud_t *level3p; + + page = kimage_alloc_control_pages(image, 0); + if (!page) { + result = -ENOMEM; + goto out; + } + level3p = (pud_t *)page_address(page); + result = init_level3_page(image, level3p, addr, last_addr); + if (result) { + goto out; + } + set_pgd(level4p++, __pgd(__pa(level3p) | _KERNPG_TABLE)); + addr += PGDIR_SIZE; + } + /* clear the unused entries */ + while (addr < end_addr) { + pgd_clear(level4p++); + addr += PGDIR_SIZE; + } +out: + return result; +} + + +static int init_pgtable(struct kimage *image, unsigned long start_pgtable) +{ + pgd_t *level4p; + level4p = (pgd_t *)__va(start_pgtable); + return init_level4_page(image, level4p, 0, end_pfn << PAGE_SHIFT); +} + +static void set_idt(void *newidt, u16 limit) +{ + struct desc_ptr curidt; + + /* x86-64 supports unaliged loads & stores */ + curidt.size = limit; + curidt.address = (unsigned long)newidt; + + __asm__ __volatile__ ( + "lidtq %0\n" + : : "m" (curidt) + ); +}; + + +static void set_gdt(void *newgdt, u16 limit) +{ + struct desc_ptr curgdt; + + /* x86-64 supports unaligned loads & stores */ + curgdt.size = limit; + curgdt.address = (unsigned long)newgdt; + + __asm__ __volatile__ ( + "lgdtq %0\n" + : : "m" (curgdt) + ); +}; + +static void load_segments(void) +{ + __asm__ __volatile__ ( + "\tmovl %0,%%ds\n" + "\tmovl %0,%%es\n" + "\tmovl %0,%%ss\n" + "\tmovl %0,%%fs\n" + "\tmovl %0,%%gs\n" + : : "a" (__KERNEL_DS) + ); +} + +typedef NORET_TYPE void (*relocate_new_kernel_t)(unsigned long indirection_page, + unsigned long control_code_buffer, + unsigned long start_address, + unsigned long pgtable) ATTRIB_NORET; + +const extern unsigned char relocate_new_kernel[]; +const extern unsigned long relocate_new_kernel_size; + +int machine_kexec_prepare(struct kimage *image) +{ + unsigned long start_pgtable, control_code_buffer; + int result; + + /* Calculate the offsets */ + start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT; + control_code_buffer = start_pgtable + PAGE_SIZE; + + /* Setup the identity mapped 64bit page table */ + result = init_pgtable(image, start_pgtable); + if (result) + return result; + + /* Place the code in the reboot code buffer */ + memcpy(__va(control_code_buffer), relocate_new_kernel, + relocate_new_kernel_size); + + return 0; +} + +void machine_kexec_cleanup(struct kimage *image) +{ + return; +} + +/* + * Do not allocate memory (or fail in any way) in machine_kexec(). + * We are past the point of no return, committed to rebooting now. + */ +NORET_TYPE void machine_kexec(struct kimage *image) +{ + unsigned long page_list; + unsigned long control_code_buffer; + unsigned long start_pgtable; + relocate_new_kernel_t rnk; + + /* Interrupts aren't acceptable while we reboot */ + local_irq_disable(); + + /* Calculate the offsets */ + page_list = image->head; + start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT; + control_code_buffer = start_pgtable + PAGE_SIZE; + + /* Set the low half of the page table to my identity mapped + * page table for kexec. Leave the high half pointing at the + * kernel pages. Don't bother to flush the global pages + * as that will happen when I fully switch to my identity mapped + * page table anyway. + */ + memcpy(__va(read_cr3()), __va(start_pgtable), PAGE_SIZE/2); + __flush_tlb(); + + + /* The segment registers are funny things, they are + * automatically loaded from a table, in memory wherever you + * set them to a specific selector, but this table is never + * accessed again unless you set the segment to a different selector. + * + * The more common model are caches where the behide + * the scenes work is done, but is also dropped at arbitrary + * times. + * + * I take advantage of this here by force loading the + * segments, before I zap the gdt with an invalid value. + */ + load_segments(); + /* The gdt & idt are now invalid. + * If you want to load them you must set up your own idt & gdt. + */ + set_gdt(phys_to_virt(0),0); + set_idt(phys_to_virt(0),0); + /* now call it */ + rnk = (relocate_new_kernel_t) control_code_buffer; + (*rnk)(page_list, control_code_buffer, image->start, start_pgtable); +} diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c index 3a89d735a4f6..8aa56736cde3 100644 --- a/arch/x86_64/kernel/mce.c +++ b/arch/x86_64/kernel/mce.c @@ -15,6 +15,8 @@ #include <linux/sysdev.h> #include <linux/miscdevice.h> #include <linux/fs.h> +#include <linux/cpu.h> +#include <linux/percpu.h> #include <asm/processor.h> #include <asm/msr.h> #include <asm/mce.h> @@ -34,6 +36,7 @@ static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL }; static unsigned long console_logged; static int notify_user; static int rip_msr; +static int mce_bootlog; /* * Lockless MCE logging infrastructure. @@ -195,10 +198,11 @@ void do_machine_check(struct pt_regs * regs, long error_code) rdmsrl(MSR_IA32_MC0_ADDR + i*4, m.addr); mce_get_rip(&m, regs); - if (error_code != -1) + if (error_code >= 0) rdtscll(m.tsc); wrmsrl(MSR_IA32_MC0_STATUS + i*4, 0); - mce_log(&m); + if (error_code != -2) + mce_log(&m); /* Did this bank cause the exception? */ /* Assume that the bank with uncorrectable errors did it, @@ -313,7 +317,7 @@ static void mce_init(void *dummy) /* Log the machine checks left over from the previous reset. This also clears all registers */ - do_machine_check(NULL, -1); + do_machine_check(NULL, mce_bootlog ? -1 : -2); set_in_cr4(X86_CR4_MCE); @@ -327,7 +331,7 @@ static void mce_init(void *dummy) } /* Add per CPU specific workarounds here */ -static void __init mce_cpu_quirks(struct cpuinfo_x86 *c) +static void __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c) { /* This should be disabled by the BIOS, but isn't always */ if (c->x86_vendor == X86_VENDOR_AMD && c->x86 == 15) { @@ -337,7 +341,7 @@ static void __init mce_cpu_quirks(struct cpuinfo_x86 *c) } } -static void __init mce_cpu_features(struct cpuinfo_x86 *c) +static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c) { switch (c->x86_vendor) { case X86_VENDOR_INTEL: @@ -352,7 +356,7 @@ static void __init mce_cpu_features(struct cpuinfo_x86 *c) * Called for each booted CPU to set up machine checks. * Must be called with preempt off. */ -void __init mcheck_init(struct cpuinfo_x86 *c) +void __cpuinit mcheck_init(struct cpuinfo_x86 *c) { static cpumask_t mce_cpus __initdata = CPU_MASK_NONE; @@ -411,7 +415,7 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize, loff memset(mcelog.entry, 0, next * sizeof(struct mce)); mcelog.next = 0; - synchronize_kernel(); + synchronize_sched(); /* Collect entries that were still getting written before the synchronize. */ @@ -474,11 +478,17 @@ static int __init mcheck_disable(char *str) } /* mce=off disables machine check. Note you can reenable it later - using sysfs */ + using sysfs. + mce=bootlog Log MCEs from before booting. Disabled by default to work + around buggy BIOS that leave bogus MCEs. */ static int __init mcheck_enable(char *str) { + if (*str == '=') + str++; if (!strcmp(str, "off")) mce_dont_init = 1; + else if (!strcmp(str, "bootlog")) + mce_bootlog = 1; else printk("mce= argument %s ignored. Please use /sys", str); return 0; @@ -514,10 +524,7 @@ static struct sysdev_class mce_sysclass = { set_kset_name("machinecheck"), }; -static struct sys_device device_mce = { - .id = 0, - .cls = &mce_sysclass, -}; +static DEFINE_PER_CPU(struct sys_device, device_mce); /* Why are there no generic functions for this? */ #define ACCESSOR(name, var, start) \ @@ -542,27 +549,83 @@ ACCESSOR(bank4ctl,bank[4],mce_restart()) ACCESSOR(tolerant,tolerant,) ACCESSOR(check_interval,check_interval,mce_restart()) +/* Per cpu sysdev init. All of the cpus still share the same ctl bank */ +static __cpuinit int mce_create_device(unsigned int cpu) +{ + int err; + if (!mce_available(&cpu_data[cpu])) + return -EIO; + + per_cpu(device_mce,cpu).id = cpu; + per_cpu(device_mce,cpu).cls = &mce_sysclass; + + err = sysdev_register(&per_cpu(device_mce,cpu)); + + if (!err) { + sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank0ctl); + sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank1ctl); + sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank2ctl); + sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank3ctl); + sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank4ctl); + sysdev_create_file(&per_cpu(device_mce,cpu), &attr_tolerant); + sysdev_create_file(&per_cpu(device_mce,cpu), &attr_check_interval); + } + return err; +} + +#ifdef CONFIG_HOTPLUG_CPU +static __cpuinit void mce_remove_device(unsigned int cpu) +{ + sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank0ctl); + sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank1ctl); + sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank2ctl); + sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank3ctl); + sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank4ctl); + sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_tolerant); + sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_check_interval); + sysdev_unregister(&per_cpu(device_mce,cpu)); +} +#endif + +/* Get notified when a cpu comes on/off. Be hotplug friendly. */ +static __cpuinit int +mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + + switch (action) { + case CPU_ONLINE: + mce_create_device(cpu); + break; +#ifdef CONFIG_HOTPLUG_CPU + case CPU_DEAD: + mce_remove_device(cpu); + break; +#endif + } + return NOTIFY_OK; +} + +static struct notifier_block mce_cpu_notifier = { + .notifier_call = mce_cpu_callback, +}; + static __init int mce_init_device(void) { int err; + int i = 0; + if (!mce_available(&boot_cpu_data)) return -EIO; err = sysdev_class_register(&mce_sysclass); - if (!err) - err = sysdev_register(&device_mce); - if (!err) { - /* could create per CPU objects, but it is not worth it. */ - sysdev_create_file(&device_mce, &attr_bank0ctl); - sysdev_create_file(&device_mce, &attr_bank1ctl); - sysdev_create_file(&device_mce, &attr_bank2ctl); - sysdev_create_file(&device_mce, &attr_bank3ctl); - sysdev_create_file(&device_mce, &attr_bank4ctl); - sysdev_create_file(&device_mce, &attr_tolerant); - sysdev_create_file(&device_mce, &attr_check_interval); - } - + + for_each_online_cpu(i) { + mce_create_device(i); + } + + register_cpu_notifier(&mce_cpu_notifier); misc_register(&mce_log_device); return err; - } + device_initcall(mce_init_device); diff --git a/arch/x86_64/kernel/mce_intel.c b/arch/x86_64/kernel/mce_intel.c index 4db9a640069f..0be0a7959814 100644 --- a/arch/x86_64/kernel/mce_intel.c +++ b/arch/x86_64/kernel/mce_intel.c @@ -42,7 +42,7 @@ done: irq_exit(); } -static void __init intel_init_thermal(struct cpuinfo_x86 *c) +static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c) { u32 l, h; int tm2 = 0; @@ -93,7 +93,7 @@ static void __init intel_init_thermal(struct cpuinfo_x86 *c) return; } -void __init mce_intel_feature_init(struct cpuinfo_x86 *c) +void __cpuinit mce_intel_feature_init(struct cpuinfo_x86 *c) { intel_init_thermal(c); } diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index 61a63be6b294..79c362d03e2e 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -23,6 +23,7 @@ #include <linux/kernel_stat.h> #include <linux/mc146818rtc.h> #include <linux/acpi.h> +#include <linux/module.h> #include <asm/smp.h> #include <asm/mtrr.h> @@ -45,7 +46,8 @@ int acpi_found_madt; int apic_version [MAX_APICS]; unsigned char mp_bus_id_to_type [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; -cpumask_t pci_bus_to_cpumask [256] = { [0 ... 255] = CPU_MASK_ALL }; +unsigned char pci_bus_to_node [256]; +EXPORT_SYMBOL(pci_bus_to_node); static int mp_current_pci_id = 0; /* I/O APIC entries */ @@ -107,7 +109,7 @@ static int __init mpf_checksum(unsigned char *mp, int len) static void __init MP_processor_info (struct mpc_config_processor *m) { - int ver; + int ver, cpu; static int found_bsp=0; if (!(m->mpc_cpuflag & CPU_ENABLED)) @@ -129,7 +131,7 @@ static void __init MP_processor_info (struct mpc_config_processor *m) return; } - num_processors++; + cpu = num_processors++; if (m->mpc_apicid > MAX_APICS) { printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n", @@ -153,13 +155,18 @@ static void __init MP_processor_info (struct mpc_config_processor *m) * in same order as logical cpu numbers. Hence the first * entry is BSP, and so on. */ + cpu = 0; + bios_cpu_apicid[0] = m->mpc_apicid; x86_cpu_to_apicid[0] = m->mpc_apicid; found_bsp = 1; - } else { - bios_cpu_apicid[num_processors - found_bsp] = m->mpc_apicid; - x86_cpu_to_apicid[num_processors - found_bsp] = m->mpc_apicid; - } + } else + cpu = num_processors - found_bsp; + bios_cpu_apicid[cpu] = m->mpc_apicid; + x86_cpu_to_apicid[cpu] = m->mpc_apicid; + + cpu_set(cpu, cpu_possible_map); + cpu_set(cpu, cpu_present_map); } static void __init MP_bus_info (struct mpc_config_bus *m) @@ -904,11 +911,20 @@ void __init mp_config_acpi_legacy_irqs (void) return; } +#define MAX_GSI_NUM 4096 + int mp_register_gsi(u32 gsi, int edge_level, int active_high_low) { int ioapic = -1; int ioapic_pin = 0; int idx, bit = 0; + static int pci_irq = 16; + /* + * Mapping between Global System Interrupts, which + * represent all possible interrupts, to the IRQs + * assigned to actual devices. + */ + static int gsi_to_irq[MAX_GSI_NUM]; if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) return gsi; @@ -943,11 +959,34 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low) if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) { Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", mp_ioapic_routing[ioapic].apic_id, ioapic_pin); - return gsi; + return gsi_to_irq[gsi]; } mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit); + if (edge_level) { + /* + * For PCI devices assign IRQs in order, avoiding gaps + * due to unused I/O APIC pins. + */ + int irq = gsi; + if (gsi < MAX_GSI_NUM) { + if (gsi > 15) + gsi = pci_irq++; +#ifdef CONFIG_ACPI_BUS + /* + * Don't assign IRQ used by ACPI SCI + */ + if (gsi == acpi_fadt.sci_int) + gsi = pci_irq++; +#endif + gsi_to_irq[irq] = gsi; + } else { + printk(KERN_ERR "GSI %u is too high\n", gsi); + return gsi; + } + } + io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, edge_level == ACPI_EDGE_SENSITIVE ? 0 : 1, active_high_low == ACPI_ACTIVE_HIGH ? 0 : 1); diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 31c0f2e6ac91..4e44d6e6b7e5 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -98,7 +98,7 @@ static unsigned int nmi_p4_cccr_val; (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \ P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE) -static __init inline int nmi_known_cpu(void) +static __cpuinit inline int nmi_known_cpu(void) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: @@ -110,7 +110,7 @@ static __init inline int nmi_known_cpu(void) } /* Run after command line and cpu_init init, but before all other checks */ -void __init nmi_watchdog_default(void) +void __cpuinit nmi_watchdog_default(void) { if (nmi_watchdog != NMI_DEFAULT) return; diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index dce8bab4306c..7577f9d7a75d 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -8,7 +8,8 @@ * * X86-64 port * Andi Kleen. - * + * + * CPU hotplug support - ashok.raj@intel.com * $Id: process.c,v 1.38 2002/01/15 10:08:03 ak Exp $ */ @@ -18,6 +19,7 @@ #include <stdarg.h> +#include <linux/cpu.h> #include <linux/errno.h> #include <linux/sched.h> #include <linux/kernel.h> @@ -34,6 +36,7 @@ #include <linux/ptrace.h> #include <linux/utsname.h> #include <linux/random.h> +#include <linux/kprobes.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -153,6 +156,29 @@ void cpu_idle_wait(void) } EXPORT_SYMBOL_GPL(cpu_idle_wait); +#ifdef CONFIG_HOTPLUG_CPU +DECLARE_PER_CPU(int, cpu_state); + +#include <asm/nmi.h> +/* We don't actually take CPU down, just spin without interrupts. */ +static inline void play_dead(void) +{ + idle_task_exit(); + wbinvd(); + mb(); + /* Ack it */ + __get_cpu_var(cpu_state) = CPU_DEAD; + + while (1) + safe_halt(); +} +#else +static inline void play_dead(void) +{ + BUG(); +} +#endif /* CONFIG_HOTPLUG_CPU */ + /* * The idle thread. There's no useful work to be * done, so just try to conserve power and have a @@ -173,6 +199,8 @@ void cpu_idle (void) idle = pm_idle; if (!idle) idle = default_idle; + if (cpu_is_offline(smp_processor_id())) + play_dead(); idle(); } @@ -203,7 +231,7 @@ static void mwait_idle(void) } } -void __init select_idle_routine(const struct cpuinfo_x86 *c) +void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) { static int printed; if (cpu_has(c, X86_FEATURE_MWAIT)) { @@ -293,6 +321,14 @@ void exit_thread(void) { struct task_struct *me = current; struct thread_struct *t = &me->thread; + + /* + * Remove function-return probe instances associated with this task + * and put them back on the free list. Do not insert an exit probe for + * this function, it will be disabled by kprobe_flush_task if you do. + */ + kprobe_flush_task(me); + if (me->thread.io_bitmap_ptr) { struct tss_struct *tss = &per_cpu(init_tss, get_cpu()); @@ -312,6 +348,13 @@ void flush_thread(void) struct task_struct *tsk = current; struct thread_info *t = current_thread_info(); + /* + * Remove function-return probe instances associated with this task + * and put them back on the free list. Do not insert an exit probe for + * this function, it will be disabled by kprobe_flush_task if you do. + */ + kprobe_flush_task(tsk); + if (t->flags & _TIF_ABI_PENDING) t->flags ^= (_TIF_ABI_PENDING | _TIF_IA32); @@ -439,6 +482,33 @@ out: } /* + * This function selects if the context switch from prev to next + * has to tweak the TSC disable bit in the cr4. + */ +static inline void disable_tsc(struct task_struct *prev_p, + struct task_struct *next_p) +{ + struct thread_info *prev, *next; + + /* + * gcc should eliminate the ->thread_info dereference if + * has_secure_computing returns 0 at compile time (SECCOMP=n). + */ + prev = prev_p->thread_info; + next = next_p->thread_info; + + if (has_secure_computing(prev) || has_secure_computing(next)) { + /* slow path here */ + if (has_secure_computing(prev) && + !has_secure_computing(next)) { + write_cr4(read_cr4() & ~X86_CR4_TSD); + } else if (!has_secure_computing(prev) && + has_secure_computing(next)) + write_cr4(read_cr4() | X86_CR4_TSD); + } +} + +/* * This special macro can be used to load a debugging register */ #define loaddebug(thread,r) set_debug(thread->debugreg ## r, r) @@ -556,6 +626,8 @@ struct task_struct *__switch_to(struct task_struct *prev_p, struct task_struct * } } + disable_tsc(prev_p, next_p); + return prev_p; } diff --git a/arch/x86_64/kernel/reboot.c b/arch/x86_64/kernel/reboot.c index be4b36f762cf..47f95687905f 100644 --- a/arch/x86_64/kernel/reboot.c +++ b/arch/x86_64/kernel/reboot.c @@ -66,34 +66,6 @@ static int __init reboot_setup(char *str) __setup("reboot=", reboot_setup); -#ifdef CONFIG_SMP -static void smp_halt(void) -{ - int cpuid = safe_smp_processor_id(); - static int first_entry = 1; - - if (reboot_force) - return; - - if (first_entry) { - first_entry = 0; - smp_call_function((void *)machine_restart, NULL, 1, 0); - } - - smp_stop_cpu(); - - /* AP calling this. Just halt */ - if (cpuid != boot_cpu_id) { - for (;;) - asm("hlt"); - } - - /* Wait for all other CPUs to have run smp_stop_cpu */ - while (!cpus_empty(cpu_online_map)) - rep_nop(); -} -#endif - static inline void kb_wait(void) { int i; @@ -103,25 +75,44 @@ static inline void kb_wait(void) break; } -void machine_restart(char * __unused) +void machine_shutdown(void) { - int i; + /* Stop the cpus and apics */ +#ifdef CONFIG_SMP + int reboot_cpu_id; - printk("machine restart\n"); + /* The boot cpu is always logical cpu 0 */ + reboot_cpu_id = 0; -#ifdef CONFIG_SMP - smp_halt(); + /* Make certain the cpu I'm about to reboot on is online */ + if (!cpu_isset(reboot_cpu_id, cpu_online_map)) { + reboot_cpu_id = smp_processor_id(); + } + + /* Make certain I only run on the appropriate processor */ + set_cpus_allowed(current, cpumask_of_cpu(reboot_cpu_id)); + + /* O.K Now that I'm on the appropriate processor, + * stop all of the others. + */ + smp_send_stop(); #endif - if (!reboot_force) { - local_irq_disable(); + local_irq_disable(); + #ifndef CONFIG_SMP - disable_local_APIC(); + disable_local_APIC(); #endif - disable_IO_APIC(); - local_irq_enable(); - } - + + disable_IO_APIC(); + + local_irq_enable(); +} + +void machine_emergency_restart(void) +{ + int i; + /* Tell the BIOS if we want cold or warm reboot */ *((unsigned short *)__va(0x472)) = reboot_mode; @@ -146,18 +137,26 @@ void machine_restart(char * __unused) } } -EXPORT_SYMBOL(machine_restart); +void machine_restart(char * __unused) +{ + printk("machine restart\n"); + + if (!reboot_force) { + machine_shutdown(); + } + machine_emergency_restart(); +} void machine_halt(void) { } -EXPORT_SYMBOL(machine_halt); - void machine_power_off(void) { + if (!reboot_force) { + machine_shutdown(); + } if (pm_power_off) pm_power_off(); } -EXPORT_SYMBOL(machine_power_off); diff --git a/arch/x86_64/kernel/relocate_kernel.S b/arch/x86_64/kernel/relocate_kernel.S new file mode 100644 index 000000000000..d24fa9b72a2b --- /dev/null +++ b/arch/x86_64/kernel/relocate_kernel.S @@ -0,0 +1,143 @@ +/* + * relocate_kernel.S - put the kernel image in place to boot + * Copyright (C) 2002-2005 Eric Biederman <ebiederm@xmission.com> + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/linkage.h> + + /* + * Must be relocatable PIC code callable as a C function, that once + * it starts can not use the previous processes stack. + */ + .globl relocate_new_kernel + .code64 +relocate_new_kernel: + /* %rdi page_list + * %rsi reboot_code_buffer + * %rdx start address + * %rcx page_table + * %r8 arg5 + * %r9 arg6 + */ + + /* zero out flags, and disable interrupts */ + pushq $0 + popfq + + /* set a new stack at the bottom of our page... */ + lea 4096(%rsi), %rsp + + /* store the parameters back on the stack */ + pushq %rdx /* store the start address */ + + /* Set cr0 to a known state: + * 31 1 == Paging enabled + * 18 0 == Alignment check disabled + * 16 0 == Write protect disabled + * 3 0 == No task switch + * 2 0 == Don't do FP software emulation. + * 0 1 == Proctected mode enabled + */ + movq %cr0, %rax + andq $~((1<<18)|(1<<16)|(1<<3)|(1<<2)), %rax + orl $((1<<31)|(1<<0)), %eax + movq %rax, %cr0 + + /* Set cr4 to a known state: + * 10 0 == xmm exceptions disabled + * 9 0 == xmm registers instructions disabled + * 8 0 == performance monitoring counter disabled + * 7 0 == page global disabled + * 6 0 == machine check exceptions disabled + * 5 1 == physical address extension enabled + * 4 0 == page size extensions disabled + * 3 0 == Debug extensions disabled + * 2 0 == Time stamp disable (disabled) + * 1 0 == Protected mode virtual interrupts disabled + * 0 0 == VME disabled + */ + + movq $((1<<5)), %rax + movq %rax, %cr4 + + jmp 1f +1: + + /* Switch to the identity mapped page tables, + * and flush the TLB. + */ + movq %rcx, %cr3 + + /* Do the copies */ + movq %rdi, %rcx /* Put the page_list in %rcx */ + xorq %rdi, %rdi + xorq %rsi, %rsi + jmp 1f + +0: /* top, read another word for the indirection page */ + + movq (%rbx), %rcx + addq $8, %rbx +1: + testq $0x1, %rcx /* is it a destination page? */ + jz 2f + movq %rcx, %rdi + andq $0xfffffffffffff000, %rdi + jmp 0b +2: + testq $0x2, %rcx /* is it an indirection page? */ + jz 2f + movq %rcx, %rbx + andq $0xfffffffffffff000, %rbx + jmp 0b +2: + testq $0x4, %rcx /* is it the done indicator? */ + jz 2f + jmp 3f +2: + testq $0x8, %rcx /* is it the source indicator? */ + jz 0b /* Ignore it otherwise */ + movq %rcx, %rsi /* For ever source page do a copy */ + andq $0xfffffffffffff000, %rsi + + movq $512, %rcx + rep ; movsq + jmp 0b +3: + + /* To be certain of avoiding problems with self-modifying code + * I need to execute a serializing instruction here. + * So I flush the TLB by reloading %cr3 here, it's handy, + * and not processor dependent. + */ + movq %cr3, %rax + movq %rax, %cr3 + + /* set all of the registers to known values */ + /* leave %rsp alone */ + + xorq %rax, %rax + xorq %rbx, %rbx + xorq %rcx, %rcx + xorq %rdx, %rdx + xorq %rsi, %rsi + xorq %rdi, %rdi + xorq %rbp, %rbp + xorq %r8, %r8 + xorq %r9, %r9 + xorq %r10, %r9 + xorq %r11, %r11 + xorq %r12, %r12 + xorq %r13, %r13 + xorq %r14, %r14 + xorq %r15, %r15 + + ret +relocate_new_kernel_end: + + .globl relocate_new_kernel_size +relocate_new_kernel_size: + .quad relocate_new_kernel_end - relocate_new_kernel diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 99f038ede23c..116a491e2961 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -40,6 +40,9 @@ #include <linux/acpi.h> #include <linux/kallsyms.h> #include <linux/edd.h> +#include <linux/mmzone.h> +#include <linux/kexec.h> + #include <asm/mtrr.h> #include <asm/uaccess.h> #include <asm/system.h> @@ -348,7 +351,7 @@ static __init void parse_cmdline_early (char ** cmdline_p) if (!memcmp(from, "mem=", 4)) parse_memopt(from+4, &from); -#ifdef CONFIG_DISCONTIGMEM +#ifdef CONFIG_NUMA if (!memcmp(from, "numa=", 5)) numa_setup(from+5); #endif @@ -365,6 +368,27 @@ static __init void parse_cmdline_early (char ** cmdline_p) if (!memcmp(from, "noexec=", 7)) nonx_setup(from + 7); +#ifdef CONFIG_KEXEC + /* crashkernel=size@addr specifies the location to reserve for + * a crash kernel. By reserving this memory we guarantee + * that linux never set's it up as a DMA target. + * Useful for holding code to do something appropriate + * after a kernel panic. + */ + else if (!memcmp(from, "crashkernel=", 12)) { + unsigned long size, base; + size = memparse(from+12, &from); + if (*from == '@') { + base = memparse(from+1, &from); + /* FIXME: Do I want a sanity check + * to validate the memory range? + */ + crashk_res.start = base; + crashk_res.end = base + size - 1; + } + } +#endif + next_char: c = *(from++); if (!c) @@ -377,17 +401,20 @@ static __init void parse_cmdline_early (char ** cmdline_p) *cmdline_p = command_line; } -#ifndef CONFIG_DISCONTIGMEM -static void __init contig_initmem_init(void) +#ifndef CONFIG_NUMA +static void __init +contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn) { - unsigned long bootmap_size, bootmap; - bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT; - bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size); - if (bootmap == -1L) - panic("Cannot find bootmem map of size %ld\n",bootmap_size); - bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn); - e820_bootmem_free(&contig_page_data, 0, end_pfn << PAGE_SHIFT); - reserve_bootmem(bootmap, bootmap_size); + unsigned long bootmap_size, bootmap; + + memory_present(0, start_pfn, end_pfn); + bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT; + bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size); + if (bootmap == -1L) + panic("Cannot find bootmem map of size %ld\n",bootmap_size); + bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn); + e820_bootmem_free(NODE_DATA(0), 0, end_pfn << PAGE_SHIFT); + reserve_bootmem(bootmap, bootmap_size); } #endif @@ -554,10 +581,10 @@ void __init setup_arch(char **cmdline_p) acpi_numa_init(); #endif -#ifdef CONFIG_DISCONTIGMEM +#ifdef CONFIG_NUMA numa_initmem_init(0, end_pfn); #else - contig_initmem_init(); + contig_initmem_init(0, end_pfn); #endif /* Reserve direct mapping */ @@ -618,6 +645,15 @@ void __init setup_arch(char **cmdline_p) } } #endif +#ifdef CONFIG_KEXEC + if (crashk_res.start != crashk_res.end) { + reserve_bootmem(crashk_res.start, + crashk_res.end - crashk_res.start + 1); + } +#endif + + sparse_init(); + paging_init(); check_ioapic(); @@ -669,7 +705,7 @@ void __init setup_arch(char **cmdline_p) #endif } -static int __init get_model_name(struct cpuinfo_x86 *c) +static int __cpuinit get_model_name(struct cpuinfo_x86 *c) { unsigned int *v; @@ -685,7 +721,7 @@ static int __init get_model_name(struct cpuinfo_x86 *c) } -static void __init display_cacheinfo(struct cpuinfo_x86 *c) +static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) { unsigned int n, dummy, eax, ebx, ecx, edx; @@ -729,8 +765,6 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) int cpu = smp_processor_id(); int node = 0; unsigned bits; - if (c->x86_num_cores == 1) - return; bits = 0; while ((1 << bits) < c->x86_num_cores) @@ -796,7 +830,7 @@ static int __init init_amd(struct cpuinfo_x86 *c) return r; } -static void __init detect_ht(struct cpuinfo_x86 *c) +static void __cpuinit detect_ht(struct cpuinfo_x86 *c) { #ifdef CONFIG_SMP u32 eax, ebx, ecx, edx; @@ -857,7 +891,7 @@ static void __init detect_ht(struct cpuinfo_x86 *c) /* * find out the number of processor cores on the die */ -static int __init intel_num_cpu_cores(struct cpuinfo_x86 *c) +static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) { unsigned int eax; @@ -875,7 +909,7 @@ static int __init intel_num_cpu_cores(struct cpuinfo_x86 *c) return 1; } -static void __init init_intel(struct cpuinfo_x86 *c) +static void __cpuinit init_intel(struct cpuinfo_x86 *c) { /* Cache sizes */ unsigned n; @@ -895,7 +929,7 @@ static void __init init_intel(struct cpuinfo_x86 *c) c->x86_num_cores = intel_num_cpu_cores(c); } -void __init get_cpu_vendor(struct cpuinfo_x86 *c) +void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) { char *v = c->x86_vendor_id; @@ -916,7 +950,7 @@ struct cpu_model_info { /* Do some early cpuid on the boot CPU to get some parameter that are needed before check_bugs. Everything advanced is in identify_cpu below. */ -void __init early_identify_cpu(struct cpuinfo_x86 *c) +void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) { u32 tfms; @@ -970,7 +1004,7 @@ void __init early_identify_cpu(struct cpuinfo_x86 *c) /* * This does the hard work of actually picking apart the CPU stuff... */ -void __init identify_cpu(struct cpuinfo_x86 *c) +void __cpuinit identify_cpu(struct cpuinfo_x86 *c) { int i; u32 xlvl; @@ -1040,14 +1074,17 @@ void __init identify_cpu(struct cpuinfo_x86 *c) #ifdef CONFIG_X86_MCE mcheck_init(c); #endif + if (c == &boot_cpu_data) + mtrr_bp_init(); + else + mtrr_ap_init(); #ifdef CONFIG_NUMA - if (c != &boot_cpu_data) - numa_add_cpu(c - cpu_data); + numa_add_cpu(smp_processor_id()); #endif } -void __init print_cpu_info(struct cpuinfo_x86 *c) +void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) { if (c->x86_model_id[0]) printk("%s", c->x86_model_id); diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 678b7ac33b8b..34082c1cc41e 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -12,6 +12,7 @@ #include <linux/string.h> #include <linux/bootmem.h> #include <linux/bitops.h> +#include <linux/module.h> #include <asm/bootsetup.h> #include <asm/pda.h> #include <asm/pgtable.h> @@ -22,22 +23,15 @@ #include <asm/smp.h> #include <asm/i387.h> #include <asm/percpu.h> -#include <asm/mtrr.h> #include <asm/proto.h> -#include <asm/mman.h> -#include <asm/numa.h> +#include <asm/sections.h> char x86_boot_params[BOOT_PARAM_SIZE] __initdata = {0,}; -cpumask_t cpu_initialized __initdata = CPU_MASK_NONE; +cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; struct x8664_pda cpu_pda[NR_CPUS] __cacheline_aligned; -extern struct task_struct init_task; - -extern unsigned char __per_cpu_start[], __per_cpu_end[]; - -extern struct desc_ptr cpu_gdt_descr[]; struct desc_ptr idt_descr = { 256 * 16, (unsigned long) idt_table }; char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned"))); @@ -101,7 +95,7 @@ void __init setup_per_cpu_areas(void) #endif for (i = 0; i < NR_CPUS; i++) { - unsigned char *ptr; + char *ptr; if (!NODE_DATA(cpu_to_node(i))) { printk("cpu with no node %d, num_online_nodes %d\n", @@ -171,7 +165,7 @@ void syscall_init(void) wrmsrl(MSR_SYSCALL_MASK, EF_TF|EF_DF|EF_IE|0x3000); } -void __init check_efer(void) +void __cpuinit check_efer(void) { unsigned long efer; @@ -188,13 +182,9 @@ void __init check_efer(void) * 'CPU state barrier', nothing should get across. * A lot of state is already set up in PDA init. */ -void __init cpu_init (void) +void __cpuinit cpu_init (void) { -#ifdef CONFIG_SMP int cpu = stack_smp_processor_id(); -#else - int cpu = smp_processor_id(); -#endif struct tss_struct *t = &per_cpu(init_tss, cpu); unsigned long v; char *estacks = NULL; @@ -214,7 +204,7 @@ void __init cpu_init (void) printk("Initializing CPU#%d\n", cpu); - clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); + clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); /* * Initialize the per-CPU GDT with the boot GDT, diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c index 429c0269dc4e..98590a989f3d 100644 --- a/arch/x86_64/kernel/signal.c +++ b/arch/x86_64/kernel/signal.c @@ -34,9 +34,9 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) -void ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, +int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct pt_regs * regs); -void ia32_setup_frame(int sig, struct k_sigaction *ka, +int ia32_setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, struct pt_regs * regs); asmlinkage long @@ -238,7 +238,7 @@ get_stack(struct k_sigaction *ka, struct pt_regs *regs, unsigned long size) return (void __user *)round_down(rsp - size, 16); } -static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, +static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct pt_regs * regs) { struct rt_sigframe __user *frame; @@ -327,20 +327,23 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, current->comm, current->pid, frame, regs->rip, frame->pretcode); #endif - return; + return 1; give_sigsegv: force_sigsegv(sig, current); + return 0; } /* * OK, we're invoking a handler */ -static void +static int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs) { + int ret; + #ifdef DEBUG_SIG printk("handle_signal pid:%d sig:%lu rip:%lx rsp:%lx regs=%p\n", current->pid, sig, @@ -384,20 +387,22 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, #ifdef CONFIG_IA32_EMULATION if (test_thread_flag(TIF_IA32)) { if (ka->sa.sa_flags & SA_SIGINFO) - ia32_setup_rt_frame(sig, ka, info, oldset, regs); + ret = ia32_setup_rt_frame(sig, ka, info, oldset, regs); else - ia32_setup_frame(sig, ka, oldset, regs); + ret = ia32_setup_frame(sig, ka, oldset, regs); } else #endif - setup_rt_frame(sig, ka, info, oldset, regs); + ret = setup_rt_frame(sig, ka, info, oldset, regs); - if (!(ka->sa.sa_flags & SA_NODEFER)) { + if (ret && !(ka->sa.sa_flags & SA_NODEFER)) { spin_lock_irq(¤t->sighand->siglock); sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); sigaddset(¤t->blocked,sig); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); } + + return ret; } /* @@ -417,10 +422,10 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) * kernel mode. Just return without doing anything * if so. */ - if ((regs->cs & 3) != 3) + if (!user_mode(regs)) return 1; - if (try_to_freeze(0)) + if (try_to_freeze()) goto no_signal; if (!oldset) @@ -434,11 +439,10 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) * inside the kernel. */ if (current->thread.debugreg7) - asm volatile("movq %0,%%db7" : : "r" (current->thread.debugreg7)); + set_debugreg(current->thread.debugreg7, 7); /* Whee! Actually deliver the signal. */ - handle_signal(signr, &info, &ka, oldset, regs); - return 1; + return handle_signal(signr, &info, &ka, oldset, regs); } no_signal: diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c index 1e379ed17b1d..e5958220d6b8 100644 --- a/arch/x86_64/kernel/smp.c +++ b/arch/x86_64/kernel/smp.c @@ -129,10 +129,9 @@ asmlinkage void smp_invalidate_interrupt (void) } else leave_mm(cpu); } +out: ack_APIC_irq(); cpu_clear(cpu, flush_cpumask); - -out: put_cpu_no_resched(); } @@ -283,6 +282,79 @@ struct call_data_struct { static struct call_data_struct * call_data; +void lock_ipi_call_lock(void) +{ + spin_lock_irq(&call_lock); +} + +void unlock_ipi_call_lock(void) +{ + spin_unlock_irq(&call_lock); +} + +/* + * this function sends a 'generic call function' IPI to one other CPU + * in the system. + */ +static void __smp_call_function_single (int cpu, void (*func) (void *info), void *info, + int nonatomic, int wait) +{ + struct call_data_struct data; + int cpus = 1; + + data.func = func; + data.info = info; + atomic_set(&data.started, 0); + data.wait = wait; + if (wait) + atomic_set(&data.finished, 0); + + call_data = &data; + wmb(); + /* Send a message to all other CPUs and wait for them to respond */ + send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNCTION_VECTOR); + + /* Wait for response */ + while (atomic_read(&data.started) != cpus) + cpu_relax(); + + if (!wait) + return; + + while (atomic_read(&data.finished) != cpus) + cpu_relax(); +} + +/* + * smp_call_function_single - Run a function on another CPU + * @func: The function to run. This must be fast and non-blocking. + * @info: An arbitrary pointer to pass to the function. + * @nonatomic: Currently unused. + * @wait: If true, wait until function has completed on other CPUs. + * + * Retrurns 0 on success, else a negative status code. + * + * Does not return until the remote CPU is nearly ready to execute <func> + * or is or has executed. + */ + +int smp_call_function_single (int cpu, void (*func) (void *info), void *info, + int nonatomic, int wait) +{ + /* prevent preemption and reschedule on another processor */ + int me = get_cpu(); + if (cpu == me) { + WARN_ON(1); + put_cpu(); + return -EBUSY; + } + spin_lock_bh(&call_lock); + __smp_call_function_single(cpu, func, info, nonatomic, wait); + spin_unlock_bh(&call_lock); + put_cpu(); + return 0; +} + /* * this function sends a 'generic call function' IPI to all other CPUs * in the system. diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index f1ec0f345941..6e4807d64d46 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -34,6 +34,7 @@ * Andi Kleen : Converted to new state machine. * Various cleanups. * Probably mostly hotplug CPU ready now. + * Ashok Raj : CPU hotplug support */ @@ -58,11 +59,6 @@ #include <asm/proto.h> #include <asm/nmi.h> -/* Change for real CPU hotplug. Note other files need to be fixed - first too. */ -#define __cpuinit __init -#define __cpuinitdata __initdata - /* Number of siblings per CPU package */ int smp_num_siblings = 1; /* Package ID of each logical CPU */ @@ -103,6 +99,19 @@ EXPORT_SYMBOL(cpu_core_map); extern unsigned char trampoline_data[]; extern unsigned char trampoline_end[]; +/* State of each CPU */ +DEFINE_PER_CPU(int, cpu_state) = { 0 }; + +/* + * Store all idle threads, this can be reused instead of creating + * a new thread. Also avoids complicated thread destroy functionality + * for idle threads. + */ +struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ; + +#define get_idle_for_cpu(x) (idle_thread_array[(x)]) +#define set_idle_for_cpu(x,p) (idle_thread_array[(x)] = (p)) + /* * Currently trivial. Write the real->protected mode * bootstrap into the page concerned. The caller @@ -202,9 +211,6 @@ static __cpuinit void sync_master(void *arg) { unsigned long flags, i; - if (smp_processor_id() != boot_cpu_id) - return; - go[MASTER] = 0; local_irq_save(flags); @@ -253,12 +259,12 @@ get_delta(long *rt, long *master) return tcenter - best_tm; } -static __cpuinit void sync_tsc(void) +static __cpuinit void sync_tsc(unsigned int master) { int i, done = 0; long delta, adj, adjust_latency = 0; unsigned long flags, rt, master_time_stamp, bound; -#if DEBUG_TSC_SYNC +#ifdef DEBUG_TSC_SYNC static struct syncdebug { long rt; /* roundtrip time */ long master; /* master's timestamp */ @@ -267,9 +273,17 @@ static __cpuinit void sync_tsc(void) } t[NUM_ROUNDS] __cpuinitdata; #endif + printk(KERN_INFO "CPU %d: Syncing TSC to CPU %u.\n", + smp_processor_id(), master); + go[MASTER] = 1; - smp_call_function(sync_master, NULL, 1, 0); + /* It is dangerous to broadcast IPI as cpus are coming up, + * as they may not be ready to accept them. So since + * we only need to send the ipi to the boot cpu direct + * the message, and avoid the race. + */ + smp_call_function_single(master, sync_master, NULL, 1, 0); while (go[MASTER]) /* wait for master to be ready */ no_cpu_relax(); @@ -294,7 +308,7 @@ static __cpuinit void sync_tsc(void) rdtscll(t); wrmsrl(MSR_IA32_TSC, t + adj); } -#if DEBUG_TSC_SYNC +#ifdef DEBUG_TSC_SYNC t[i].rt = rt; t[i].master = master_time_stamp; t[i].diff = delta; @@ -304,7 +318,7 @@ static __cpuinit void sync_tsc(void) } spin_unlock_irqrestore(&tsc_sync_lock, flags); -#if DEBUG_TSC_SYNC +#ifdef DEBUG_TSC_SYNC for (i = 0; i < NUM_ROUNDS; ++i) printk("rt=%5ld master=%5ld diff=%5ld adjlat=%5ld\n", t[i].rt, t[i].master, t[i].diff, t[i].lat); @@ -313,16 +327,14 @@ static __cpuinit void sync_tsc(void) printk(KERN_INFO "CPU %d: synchronized TSC with CPU %u (last diff %ld cycles, " "maxerr %lu cycles)\n", - smp_processor_id(), boot_cpu_id, delta, rt); + smp_processor_id(), master, delta, rt); } static void __cpuinit tsc_sync_wait(void) { if (notscsync || !cpu_has_tsc) return; - printk(KERN_INFO "CPU %d: Syncing TSC to CPU %u.\n", smp_processor_id(), - boot_cpu_id); - sync_tsc(); + sync_tsc(boot_cpu_id); } static __init int notscsync_setup(char *s) @@ -418,6 +430,33 @@ void __cpuinit smp_callin(void) cpu_set(cpuid, cpu_callin_map); } +static inline void set_cpu_sibling_map(int cpu) +{ + int i; + + if (smp_num_siblings > 1) { + for_each_cpu(i) { + if (cpu_core_id[cpu] == cpu_core_id[i]) { + cpu_set(i, cpu_sibling_map[cpu]); + cpu_set(cpu, cpu_sibling_map[i]); + } + } + } else { + cpu_set(cpu, cpu_sibling_map[cpu]); + } + + if (current_cpu_data.x86_num_cores > 1) { + for_each_cpu(i) { + if (phys_proc_id[cpu] == phys_proc_id[i]) { + cpu_set(i, cpu_core_map[cpu]); + cpu_set(cpu, cpu_core_map[i]); + } + } + } else { + cpu_core_map[cpu] = cpu_sibling_map[cpu]; + } +} + /* * Setup code on secondary processor (after comming out of the trampoline) */ @@ -448,9 +487,28 @@ void __cpuinit start_secondary(void) enable_APIC_timer(); /* + * The sibling maps must be set before turing the online map on for + * this cpu + */ + set_cpu_sibling_map(smp_processor_id()); + + /* + * We need to hold call_lock, so there is no inconsistency + * between the time smp_call_function() determines number of + * IPI receipients, and the time when the determination is made + * for which cpus receive the IPI in genapic_flat.c. Holding this + * lock helps us to not include this cpu in a currently in progress + * smp_call_function(). + */ + lock_ipi_call_lock(); + + /* * Allow the master to continue. */ cpu_set(smp_processor_id(), cpu_online_map); + per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; + unlock_ipi_call_lock(); + mb(); /* Wait for TSC sync to not schedule things before. @@ -464,7 +522,7 @@ void __cpuinit start_secondary(void) extern volatile unsigned long init_rsp; extern void (*initial_code)(void); -#if APIC_DEBUG +#ifdef APIC_DEBUG static void inquire_remote_apic(int apicid) { unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 }; @@ -628,36 +686,81 @@ static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int sta return (send_status | accept_status); } +struct create_idle { + struct task_struct *idle; + struct completion done; + int cpu; +}; + +void do_fork_idle(void *_c_idle) +{ + struct create_idle *c_idle = _c_idle; + + c_idle->idle = fork_idle(c_idle->cpu); + complete(&c_idle->done); +} + /* * Boot one CPU. */ static int __cpuinit do_boot_cpu(int cpu, int apicid) { - struct task_struct *idle; unsigned long boot_error; int timeout; unsigned long start_rip; + struct create_idle c_idle = { + .cpu = cpu, + .done = COMPLETION_INITIALIZER(c_idle.done), + }; + DECLARE_WORK(work, do_fork_idle, &c_idle); + + c_idle.idle = get_idle_for_cpu(cpu); + + if (c_idle.idle) { + c_idle.idle->thread.rsp = (unsigned long) (((struct pt_regs *) + (THREAD_SIZE + (unsigned long) c_idle.idle->thread_info)) - 1); + init_idle(c_idle.idle, cpu); + goto do_rest; + } + /* - * We can't use kernel_thread since we must avoid to - * reschedule the child. + * During cold boot process, keventd thread is not spun up yet. + * When we do cpu hot-add, we create idle threads on the fly, we should + * not acquire any attributes from the calling context. Hence the clean + * way to create kernel_threads() is to do that from keventd(). + * We do the current_is_keventd() due to the fact that ACPI notifier + * was also queuing to keventd() and when the caller is already running + * in context of keventd(), we would end up with locking up the keventd + * thread. */ - idle = fork_idle(cpu); - if (IS_ERR(idle)) { + if (!keventd_up() || current_is_keventd()) + work.func(work.data); + else { + schedule_work(&work); + wait_for_completion(&c_idle.done); + } + + if (IS_ERR(c_idle.idle)) { printk("failed fork for CPU %d\n", cpu); - return PTR_ERR(idle); + return PTR_ERR(c_idle.idle); } - cpu_pda[cpu].pcurrent = idle; + set_idle_for_cpu(cpu, c_idle.idle); + +do_rest: + + cpu_pda[cpu].pcurrent = c_idle.idle; start_rip = setup_trampoline(); - init_rsp = idle->thread.rsp; + init_rsp = c_idle.idle->thread.rsp; per_cpu(init_tss,cpu).rsp0 = init_rsp; initial_code = start_secondary; - clear_ti_thread_flag(idle->thread_info, TIF_FORK); + clear_ti_thread_flag(c_idle.idle->thread_info, TIF_FORK); - printk(KERN_INFO "Booting processor %d/%d rip %lx rsp %lx\n", cpu, apicid, - start_rip, init_rsp); + printk(KERN_INFO "Booting processor %d/%d APIC 0x%x\n", cpu, + cpus_weight(cpu_present_map), + apicid); /* * This grunge runs the startup process for @@ -724,7 +827,7 @@ static int __cpuinit do_boot_cpu(int cpu, int apicid) else /* trampoline code not run */ printk("Not responding.\n"); -#if APIC_DEBUG +#ifdef APIC_DEBUG inquire_remote_apic(apicid); #endif } @@ -746,51 +849,6 @@ cycles_t cacheflush_time; unsigned long cache_decay_ticks; /* - * Construct cpu_sibling_map[], so that we can tell the sibling CPU - * on SMT systems efficiently. - */ -static __cpuinit void detect_siblings(void) -{ - int cpu; - - for (cpu = 0; cpu < NR_CPUS; cpu++) { - cpus_clear(cpu_sibling_map[cpu]); - cpus_clear(cpu_core_map[cpu]); - } - - for_each_online_cpu (cpu) { - struct cpuinfo_x86 *c = cpu_data + cpu; - int siblings = 0; - int i; - if (smp_num_siblings > 1) { - for_each_online_cpu (i) { - if (cpu_core_id[cpu] == cpu_core_id[i]) { - siblings++; - cpu_set(i, cpu_sibling_map[cpu]); - } - } - } else { - siblings++; - cpu_set(cpu, cpu_sibling_map[cpu]); - } - - if (siblings != smp_num_siblings) { - printk(KERN_WARNING - "WARNING: %d siblings found for CPU%d, should be %d\n", - siblings, cpu, smp_num_siblings); - smp_num_siblings = siblings; - } - if (c->x86_num_cores > 1) { - for_each_online_cpu(i) { - if (phys_proc_id[cpu] == phys_proc_id[i]) - cpu_set(i, cpu_core_map[cpu]); - } - } else - cpu_core_map[cpu] = cpu_sibling_map[cpu]; - } -} - -/* * Cleanup possible dangling ends... */ static __cpuinit void smp_cleanup_boot(void) @@ -823,7 +881,7 @@ static __cpuinit void smp_cleanup_boot(void) * * RED-PEN audit/test this more. I bet there is more state messed up here. */ -static __cpuinit void disable_smp(void) +static __init void disable_smp(void) { cpu_present_map = cpumask_of_cpu(0); cpu_possible_map = cpumask_of_cpu(0); @@ -838,7 +896,7 @@ static __cpuinit void disable_smp(void) /* * Handle user cpus=... parameter. */ -static __cpuinit void enforce_max_cpus(unsigned max_cpus) +static __init void enforce_max_cpus(unsigned max_cpus) { int i, k; k = 0; @@ -852,10 +910,31 @@ static __cpuinit void enforce_max_cpus(unsigned max_cpus) } } +#ifdef CONFIG_HOTPLUG_CPU +/* + * cpu_possible_map should be static, it cannot change as cpu's + * are onlined, or offlined. The reason is per-cpu data-structures + * are allocated by some modules at init time, and dont expect to + * do this dynamically on cpu arrival/departure. + * cpu_present_map on the other hand can change dynamically. + * In case when cpu_hotplug is not compiled, then we resort to current + * behaviour, which is cpu_possible == cpu_present. + * If cpu-hotplug is supported, then we need to preallocate for all + * those NR_CPUS, hence cpu_possible_map represents entire NR_CPUS range. + * - Ashok Raj + */ +static void prefill_possible_map(void) +{ + int i; + for (i = 0; i < NR_CPUS; i++) + cpu_set(i, cpu_possible_map); +} +#endif + /* * Various sanity checks. */ -static int __cpuinit smp_sanity_check(unsigned max_cpus) +static int __init smp_sanity_check(unsigned max_cpus) { if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) { printk("weird, boot CPU (#%d) not listed by the BIOS.\n", @@ -913,28 +992,17 @@ static int __cpuinit smp_sanity_check(unsigned max_cpus) * Prepare for SMP bootup. The MP table or ACPI has been read * earlier. Just do some sanity checking here and enable APIC mode. */ -void __cpuinit smp_prepare_cpus(unsigned int max_cpus) +void __init smp_prepare_cpus(unsigned int max_cpus) { - int i; - nmi_watchdog_default(); current_cpu_data = boot_cpu_data; current_thread_info()->cpu = 0; /* needed? */ enforce_max_cpus(max_cpus); - /* - * Fill in cpu_present_mask - */ - for (i = 0; i < NR_CPUS; i++) { - int apicid = cpu_present_to_apicid(i); - if (physid_isset(apicid, phys_cpu_present_map)) { - cpu_set(i, cpu_present_map); - /* possible map would be different if we supported real - CPU hotplug. */ - cpu_set(i, cpu_possible_map); - } - } +#ifdef CONFIG_HOTPLUG_CPU + prefill_possible_map(); +#endif if (smp_sanity_check(max_cpus) < 0) { printk(KERN_INFO "SMP disabled\n"); @@ -978,13 +1046,13 @@ void __init smp_prepare_boot_cpu(void) int me = smp_processor_id(); cpu_set(me, cpu_online_map); cpu_set(me, cpu_callout_map); + cpu_set(0, cpu_sibling_map[0]); + cpu_set(0, cpu_core_map[0]); + per_cpu(cpu_state, me) = CPU_ONLINE; } /* * Entry point to boot a CPU. - * - * This is all __cpuinit, not __devinit for now because we don't support - * CPU hotplug (yet). */ int __cpuinit __cpu_up(unsigned int cpu) { @@ -1001,6 +1069,15 @@ int __cpuinit __cpu_up(unsigned int cpu) return -EINVAL; } + /* + * Already booted CPU? + */ + if (cpu_isset(cpu, cpu_callin_map)) { + Dprintk("do_boot_cpu %d Already started\n", cpu); + return -ENOSYS; + } + + per_cpu(cpu_state, cpu) = CPU_UP_PREPARE; /* Boot it! */ err = do_boot_cpu(cpu, apicid); if (err < 0) { @@ -1013,23 +1090,117 @@ int __cpuinit __cpu_up(unsigned int cpu) while (!cpu_isset(cpu, cpu_online_map)) cpu_relax(); - return 0; + err = 0; + + return err; } /* * Finish the SMP boot. */ -void __cpuinit smp_cpus_done(unsigned int max_cpus) +void __init smp_cpus_done(unsigned int max_cpus) { +#ifndef CONFIG_HOTPLUG_CPU zap_low_mappings(); +#endif smp_cleanup_boot(); #ifdef CONFIG_X86_IO_APIC setup_ioapic_dest(); #endif - detect_siblings(); time_init_gtod(); check_nmi_watchdog(); } + +#ifdef CONFIG_HOTPLUG_CPU + +static void remove_siblinginfo(int cpu) +{ + int sibling; + + for_each_cpu_mask(sibling, cpu_sibling_map[cpu]) + cpu_clear(cpu, cpu_sibling_map[sibling]); + for_each_cpu_mask(sibling, cpu_core_map[cpu]) + cpu_clear(cpu, cpu_core_map[sibling]); + cpus_clear(cpu_sibling_map[cpu]); + cpus_clear(cpu_core_map[cpu]); + phys_proc_id[cpu] = BAD_APICID; + cpu_core_id[cpu] = BAD_APICID; +} + +void remove_cpu_from_maps(void) +{ + int cpu = smp_processor_id(); + + cpu_clear(cpu, cpu_callout_map); + cpu_clear(cpu, cpu_callin_map); + clear_bit(cpu, &cpu_initialized); /* was set by cpu_init() */ +} + +int __cpu_disable(void) +{ + int cpu = smp_processor_id(); + + /* + * Perhaps use cpufreq to drop frequency, but that could go + * into generic code. + * + * We won't take down the boot processor on i386 due to some + * interrupts only being able to be serviced by the BSP. + * Especially so if we're not using an IOAPIC -zwane + */ + if (cpu == 0) + return -EBUSY; + + disable_APIC_timer(); + + /* + * HACK: + * Allow any queued timer interrupts to get serviced + * This is only a temporary solution until we cleanup + * fixup_irqs as we do for IA64. + */ + local_irq_enable(); + mdelay(1); + + local_irq_disable(); + remove_siblinginfo(cpu); + + /* It's now safe to remove this processor from the online map */ + cpu_clear(cpu, cpu_online_map); + remove_cpu_from_maps(); + fixup_irqs(cpu_online_map); + return 0; +} + +void __cpu_die(unsigned int cpu) +{ + /* We don't do anything here: idle task is faking death itself. */ + unsigned int i; + + for (i = 0; i < 10; i++) { + /* They ack this in play_dead by setting CPU_DEAD */ + if (per_cpu(cpu_state, cpu) == CPU_DEAD) { + printk ("CPU %d is now offline\n", cpu); + return; + } + msleep(100); + } + printk(KERN_ERR "CPU %u didn't die...\n", cpu); +} + +#else /* ... !CONFIG_HOTPLUG_CPU */ + +int __cpu_disable(void) +{ + return -ENOSYS; +} + +void __cpu_die(unsigned int cpu) +{ + /* We said "no" in __cpu_disable */ + BUG(); +} +#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/x86_64/kernel/suspend.c b/arch/x86_64/kernel/suspend.c index ebaa1e37d657..0612640d91b1 100644 --- a/arch/x86_64/kernel/suspend.c +++ b/arch/x86_64/kernel/suspend.c @@ -44,7 +44,6 @@ void __save_processor_state(struct saved_context *ctxt) */ asm volatile ("sgdt %0" : "=m" (ctxt->gdt_limit)); asm volatile ("sidt %0" : "=m" (ctxt->idt_limit)); - asm volatile ("sldt %0" : "=m" (ctxt->ldt)); asm volatile ("str %0" : "=m" (ctxt->tr)); /* XMM0..XMM15 should be handled by kernel_fpu_begin(). */ @@ -69,6 +68,7 @@ void __save_processor_state(struct saved_context *ctxt) asm volatile ("movq %%cr2, %0" : "=r" (ctxt->cr2)); asm volatile ("movq %%cr3, %0" : "=r" (ctxt->cr3)); asm volatile ("movq %%cr4, %0" : "=r" (ctxt->cr4)); + asm volatile ("movq %%cr8, %0" : "=r" (ctxt->cr8)); } void save_processor_state(void) @@ -90,12 +90,20 @@ void __restore_processor_state(struct saved_context *ctxt) /* * control registers */ + asm volatile ("movq %0, %%cr8" :: "r" (ctxt->cr8)); asm volatile ("movq %0, %%cr4" :: "r" (ctxt->cr4)); asm volatile ("movq %0, %%cr3" :: "r" (ctxt->cr3)); asm volatile ("movq %0, %%cr2" :: "r" (ctxt->cr2)); asm volatile ("movq %0, %%cr0" :: "r" (ctxt->cr0)); /* + * now restore the descriptor tables to their proper values + * ltr is done i fix_processor_context(). + */ + asm volatile ("lgdt %0" :: "m" (ctxt->gdt_limit)); + asm volatile ("lidt %0" :: "m" (ctxt->idt_limit)); + + /* * segment registers */ asm volatile ("movw %0, %%ds" :: "r" (ctxt->ds)); @@ -108,17 +116,10 @@ void __restore_processor_state(struct saved_context *ctxt) wrmsrl(MSR_GS_BASE, ctxt->gs_base); wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base); - /* - * now restore the descriptor tables to their proper values - * ltr is done i fix_processor_context(). - */ - asm volatile ("lgdt %0" :: "m" (ctxt->gdt_limit)); - asm volatile ("lidt %0" :: "m" (ctxt->idt_limit)); - asm volatile ("lldt %0" :: "m" (ctxt->ldt)); - fix_processor_context(); do_fpu_end(); + mtrr_ap_init(); } void restore_processor_state(void) diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index fb8c809b4cd9..66bf6ddeb0c3 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -64,6 +64,7 @@ static int notsc __initdata = 0; unsigned int cpu_khz; /* TSC clocks / usec, not used here */ static unsigned long hpet_period; /* fsecs / HPET clock */ unsigned long hpet_tick; /* HPET clocks / interrupt */ +static int hpet_use_timer; unsigned long vxtime_hz = PIT_TICK_RATE; int report_lost_ticks; /* command line option */ unsigned long long monotonic_base; @@ -105,7 +106,9 @@ static inline unsigned int do_gettimeoffset_tsc(void) static inline unsigned int do_gettimeoffset_hpet(void) { - return ((hpet_readl(HPET_COUNTER) - vxtime.last) * vxtime.quot) >> 32; + /* cap counter read to one tick to avoid inconsistencies */ + unsigned long counter = hpet_readl(HPET_COUNTER) - vxtime.last; + return (min(counter,hpet_tick) * vxtime.quot) >> 32; } unsigned int (*do_gettimeoffset)(void) = do_gettimeoffset_tsc; @@ -301,7 +304,7 @@ unsigned long long monotonic_clock(void) last_offset = vxtime.last; base = monotonic_base; - this_offset = hpet_readl(HPET_T0_CMP) - hpet_tick; + this_offset = hpet_readl(HPET_COUNTER); } while (read_seqretry(&xtime_lock, seq)); offset = (this_offset - last_offset); @@ -377,7 +380,14 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) write_seqlock(&xtime_lock); - if (vxtime.hpet_address) { + if (vxtime.hpet_address) + offset = hpet_readl(HPET_COUNTER); + + if (hpet_use_timer) { + /* if we're using the hpet timer functionality, + * we can more accurately know the counter value + * when the timer interrupt occured. + */ offset = hpet_readl(HPET_T0_CMP) - hpet_tick; delay = hpet_readl(HPET_COUNTER) - offset; } else { @@ -803,17 +813,18 @@ static int hpet_timer_stop_set_go(unsigned long tick) * Set up timer 0, as periodic with first interrupt to happen at hpet_tick, * and period also hpet_tick. */ - - hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | + if (hpet_use_timer) { + hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | HPET_TN_32BIT, HPET_T0_CFG); - hpet_writel(hpet_tick, HPET_T0_CMP); - hpet_writel(hpet_tick, HPET_T0_CMP); /* AK: why twice? */ - + hpet_writel(hpet_tick, HPET_T0_CMP); + hpet_writel(hpet_tick, HPET_T0_CMP); /* AK: why twice? */ + cfg |= HPET_CFG_LEGACY; + } /* * Go! */ - cfg |= HPET_CFG_ENABLE | HPET_CFG_LEGACY; + cfg |= HPET_CFG_ENABLE; hpet_writel(cfg, HPET_CFG); return 0; @@ -834,8 +845,7 @@ static int hpet_init(void) id = hpet_readl(HPET_ID); - if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER) || - !(id & HPET_ID_LEGSUP)) + if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER)) return -1; hpet_period = hpet_readl(HPET_PERIOD); @@ -845,6 +855,8 @@ static int hpet_init(void) hpet_tick = (1000000000L * (USEC_PER_SEC / HZ) + hpet_period / 2) / hpet_period; + hpet_use_timer = (id & HPET_ID_LEGSUP); + return hpet_timer_stop_set_go(hpet_tick); } @@ -901,9 +913,11 @@ void __init time_init(void) set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); - if (!hpet_init()) { + if (!hpet_init()) vxtime_hz = (1000000000000000L + hpet_period / 2) / hpet_period; + + if (hpet_use_timer) { cpu_khz = hpet_calibrate_tsc(); timename = "HPET"; #ifdef CONFIG_X86_PM_TIMER @@ -968,7 +982,7 @@ void __init time_init_gtod(void) if (unsynchronized_tsc()) notsc = 1; if (vxtime.hpet_address && notsc) { - timetype = "HPET"; + timetype = hpet_use_timer ? "HPET" : "PIT/HPET"; vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick; vxtime.mode = VXTIME_HPET; do_gettimeoffset = do_gettimeoffset_hpet; @@ -983,7 +997,7 @@ void __init time_init_gtod(void) printk(KERN_INFO "Disabling vsyscall due to use of PM timer\n"); #endif } else { - timetype = vxtime.hpet_address ? "HPET/TSC" : "PIT/TSC"; + timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC"; vxtime.mode = VXTIME_TSC; } diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index 3dfec8fdabcd..6ead433a3885 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -274,7 +274,7 @@ EXPORT_SYMBOL(dump_stack); void show_registers(struct pt_regs *regs) { int i; - int in_kernel = (regs->cs & 3) == 0; + int in_kernel = !user_mode(regs); unsigned long rsp; const int cpu = safe_smp_processor_id(); struct task_struct *cur = cpu_pda[cpu].pcurrent; @@ -318,7 +318,7 @@ void handle_BUG(struct pt_regs *regs) struct bug_frame f; char tmp; - if (regs->cs & 3) + if (user_mode(regs)) return; if (__copy_from_user(&f, (struct bug_frame *) regs->rip, sizeof(struct bug_frame))) @@ -437,7 +437,7 @@ static void do_trap(int trapnr, int signr, char *str, } #endif - if ((regs->cs & 3) != 0) { + if (user_mode(regs)) { struct task_struct *tsk = current; if (exception_trace && unhandled_signal(tsk, signr)) @@ -522,7 +522,7 @@ asmlinkage void do_general_protection(struct pt_regs * regs, long error_code) } #endif - if ((regs->cs & 3)!=0) { + if (user_mode(regs)) { struct task_struct *tsk = current; if (exception_trace && unhandled_signal(tsk, SIGSEGV)) @@ -586,9 +586,12 @@ static void unknown_nmi_error(unsigned char reason, struct pt_regs * regs) asmlinkage void default_do_nmi(struct pt_regs *regs) { unsigned char reason = 0; + int cpu; + + cpu = smp_processor_id(); /* Only the BSP gets external NMIs from the system. */ - if (!smp_processor_id()) + if (!cpu) reason = get_nmi_reason(); if (!(reason & 0xc0)) { @@ -638,7 +641,7 @@ asmlinkage struct pt_regs *sync_regs(struct pt_regs *eregs) if (eregs == (struct pt_regs *)eregs->rsp) ; /* Exception from user space */ - else if (eregs->cs & 3) + else if (user_mode(eregs)) regs = ((struct pt_regs *)current->thread.rsp0) - 1; /* Exception from kernel and interrupts are enabled. Move to kernel process stack. */ @@ -669,7 +672,7 @@ asmlinkage void do_debug(struct pt_regs * regs, unsigned long error_code) } #endif - asm("movq %%db6,%0" : "=r" (condition)); + get_debugreg(condition, 6); if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code, SIGTRAP) == NOTIFY_STOP) @@ -697,7 +700,7 @@ asmlinkage void do_debug(struct pt_regs * regs, unsigned long error_code) * allowing programs to debug themselves without the ptrace() * interface. */ - if ((regs->cs & 3) == 0) + if (!user_mode(regs)) goto clear_TF_reenable; /* * Was the TF flag set by a debugger? If so, clear it now, @@ -715,13 +718,13 @@ asmlinkage void do_debug(struct pt_regs * regs, unsigned long error_code) info.si_signo = SIGTRAP; info.si_errno = 0; info.si_code = TRAP_BRKPT; - if ((regs->cs & 3) == 0) + if (!user_mode(regs)) goto clear_dr7; info.si_addr = (void __user *)regs->rip; force_sig_info(SIGTRAP, &info, tsk); clear_dr7: - asm volatile("movq %0,%%db7"::"r"(0UL)); + set_debugreg(0UL, 7); return; clear_TF_reenable: @@ -756,7 +759,7 @@ asmlinkage void do_coprocessor_error(struct pt_regs *regs) unsigned short cwd, swd; conditional_sti(regs); - if ((regs->cs & 3) == 0 && + if (!user_mode(regs) && kernel_math_error(regs, "kernel x87 math error")) return; @@ -822,7 +825,7 @@ asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs) unsigned short mxcsr; conditional_sti(regs); - if ((regs->cs & 3) == 0 && + if (!user_mode(regs) && kernel_math_error(regs, "kernel simd math error")) return; diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index 59ebd5beda87..2a94f9b60b2d 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -2,7 +2,10 @@ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>; */ +#define LOAD_OFFSET __START_KERNEL_map + #include <asm-generic/vmlinux.lds.h> +#include <asm/page.h> #include <linux/config.h> OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64") @@ -11,28 +14,30 @@ ENTRY(phys_startup_64) jiffies_64 = jiffies; SECTIONS { - . = 0xffffffff80100000; + . = __START_KERNEL; phys_startup_64 = startup_64 - LOAD_OFFSET; _text = .; /* Text and read-only data */ - .text : { + .text : AT(ADDR(.text) - LOAD_OFFSET) { *(.text) SCHED_TEXT LOCK_TEXT *(.fixup) *(.gnu.warning) } = 0x9090 - .text.lock : { *(.text.lock) } /* out-of-line lock text */ + /* out-of-line lock text */ + .text.lock : AT(ADDR(.text.lock) - LOAD_OFFSET) { *(.text.lock) } _etext = .; /* End of text section */ . = ALIGN(16); /* Exception table */ __start___ex_table = .; - __ex_table : { *(__ex_table) } + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { *(__ex_table) } __stop___ex_table = .; RODATA - .data : { /* Data */ + /* Data */ + .data : AT(ADDR(.data) - LOAD_OFFSET) { *(.data) CONSTRUCTORS } @@ -40,62 +45,99 @@ SECTIONS _edata = .; /* End of data section */ __bss_start = .; /* BSS */ - .bss : { + .bss : AT(ADDR(.bss) - LOAD_OFFSET) { *(.bss.page_aligned) *(.bss) } __bss_end = .; + . = ALIGN(PAGE_SIZE); + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); + .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { + *(.data.cacheline_aligned) + } . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .data.cacheline_aligned : { *(.data.cacheline_aligned) } + .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { + *(.data.read_mostly) + } + +#define VSYSCALL_ADDR (-10*1024*1024) +#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) +#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) + +#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR) +#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET) -#define AFTER(x) BINALIGN(LOADADDR(x) + SIZEOF(x), 16) -#define BINALIGN(x,y) (((x) + (y) - 1) & ~((y) - 1)) -#define CACHE_ALIGN(x) BINALIGN(x, CONFIG_X86_L1_CACHE_BYTES) +#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR) +#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET) + + . = VSYSCALL_ADDR; + .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } + __vsyscall_0 = VSYSCALL_VIRT_ADDR; - .vsyscall_0 -10*1024*1024: AT ((LOADADDR(.data.cacheline_aligned) + SIZEOF(.data.cacheline_aligned) + 4095) & ~(4095)) { *(.vsyscall_0) } - __vsyscall_0 = LOADADDR(.vsyscall_0); . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .xtime_lock : AT CACHE_ALIGN(AFTER(.vsyscall_0)) { *(.xtime_lock) } - xtime_lock = LOADADDR(.xtime_lock); - .vxtime : AT AFTER(.xtime_lock) { *(.vxtime) } - vxtime = LOADADDR(.vxtime); - .wall_jiffies : AT AFTER(.vxtime) { *(.wall_jiffies) } - wall_jiffies = LOADADDR(.wall_jiffies); - .sys_tz : AT AFTER(.wall_jiffies) { *(.sys_tz) } - sys_tz = LOADADDR(.sys_tz); - .sysctl_vsyscall : AT AFTER(.sys_tz) { *(.sysctl_vsyscall) } - sysctl_vsyscall = LOADADDR(.sysctl_vsyscall); - .xtime : AT AFTER(.sysctl_vsyscall) { *(.xtime) } - xtime = LOADADDR(.xtime); + .xtime_lock : AT(VLOAD(.xtime_lock)) { *(.xtime_lock) } + xtime_lock = VVIRT(.xtime_lock); + + .vxtime : AT(VLOAD(.vxtime)) { *(.vxtime) } + vxtime = VVIRT(.vxtime); + + .wall_jiffies : AT(VLOAD(.wall_jiffies)) { *(.wall_jiffies) } + wall_jiffies = VVIRT(.wall_jiffies); + + .sys_tz : AT(VLOAD(.sys_tz)) { *(.sys_tz) } + sys_tz = VVIRT(.sys_tz); + + .sysctl_vsyscall : AT(VLOAD(.sysctl_vsyscall)) { *(.sysctl_vsyscall) } + sysctl_vsyscall = VVIRT(.sysctl_vsyscall); + + .xtime : AT(VLOAD(.xtime)) { *(.xtime) } + xtime = VVIRT(.xtime); + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .jiffies : AT CACHE_ALIGN(AFTER(.xtime)) { *(.jiffies) } - jiffies = LOADADDR(.jiffies); - .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT (LOADADDR(.vsyscall_0) + 1024) { *(.vsyscall_1) } - . = LOADADDR(.vsyscall_0) + 4096; + .jiffies : AT(VLOAD(.jiffies)) { *(.jiffies) } + jiffies = VVIRT(.jiffies); + + .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) { *(.vsyscall_1) } + .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) { *(.vsyscall_2) } + .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) { *(.vsyscall_3) } + + . = VSYSCALL_VIRT_ADDR + 4096; + +#undef VSYSCALL_ADDR +#undef VSYSCALL_PHYS_ADDR +#undef VSYSCALL_VIRT_ADDR +#undef VLOAD_OFFSET +#undef VLOAD +#undef VVIRT_OFFSET +#undef VVIRT . = ALIGN(8192); /* init_task */ - .data.init_task : { *(.data.init_task) } + .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { + *(.data.init_task) + } . = ALIGN(4096); - .data.page_aligned : { *(.data.page_aligned) } + .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { + *(.data.page_aligned) + } . = ALIGN(4096); /* Init code and data */ __init_begin = .; - .init.text : { + .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { _sinittext = .; *(.init.text) _einittext = .; } __initdata_begin = .; - .init.data : { *(.init.data) } + .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { *(.init.data) } __initdata_end = .; . = ALIGN(16); __setup_start = .; - .init.setup : { *(.init.setup) } + .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { *(.init.setup) } __setup_end = .; __initcall_start = .; - .initcall.init : { + .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { *(.initcall1.init) *(.initcall2.init) *(.initcall3.init) @@ -106,32 +148,38 @@ SECTIONS } __initcall_end = .; __con_initcall_start = .; - .con_initcall.init : { *(.con_initcall.init) } + .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { + *(.con_initcall.init) + } __con_initcall_end = .; SECURITY_INIT . = ALIGN(8); __alt_instructions = .; - .altinstructions : { *(.altinstructions) } + .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { + *(.altinstructions) + } __alt_instructions_end = .; - .altinstr_replacement : { *(.altinstr_replacement) } + .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { + *(.altinstr_replacement) + } /* .exit.text is discard at runtime, not link time, to deal with references from .altinstructions and .eh_frame */ - .exit.text : { *(.exit.text) } - .exit.data : { *(.exit.data) } + .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { *(.exit.text) } + .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { *(.exit.data) } . = ALIGN(4096); __initramfs_start = .; - .init.ramfs : { *(.init.ramfs) } + .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) } __initramfs_end = .; . = ALIGN(32); __per_cpu_start = .; - .data.percpu : { *(.data.percpu) } + .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { *(.data.percpu) } __per_cpu_end = .; . = ALIGN(4096); __init_end = .; . = ALIGN(4096); __nosave_begin = .; - .data_nosave : { *(.data.nosave) } + .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data.nosave) } . = ALIGN(4096); __nosave_end = .; diff --git a/arch/x86_64/lib/csum-copy.S b/arch/x86_64/lib/csum-copy.S index 01808ec37836..72fd55ee896e 100644 --- a/arch/x86_64/lib/csum-copy.S +++ b/arch/x86_64/lib/csum-copy.S @@ -188,8 +188,8 @@ csum_partial_copy_generic: source movw (%rdi),%bx adcl %ebx,%eax - dest decl %ecx + dest movw %bx,(%rsi) leaq 2(%rdi),%rdi leaq 2(%rsi),%rsi diff --git a/arch/x86_64/lib/delay.c b/arch/x86_64/lib/delay.c index aed61a668a1b..841bd738a189 100644 --- a/arch/x86_64/lib/delay.c +++ b/arch/x86_64/lib/delay.c @@ -12,12 +12,17 @@ #include <linux/sched.h> #include <linux/delay.h> #include <asm/delay.h> +#include <asm/msr.h> #ifdef CONFIG_SMP #include <asm/smp.h> #endif -int x86_udelay_tsc = 0; /* Delay via TSC */ +int read_current_timer(unsigned long *timer_value) +{ + rdtscll(*timer_value); + return 0; +} void __delay(unsigned long loops) { diff --git a/arch/x86_64/mm/Makefile b/arch/x86_64/mm/Makefile index 66c354ad80ca..1d232a87f113 100644 --- a/arch/x86_64/mm/Makefile +++ b/arch/x86_64/mm/Makefile @@ -4,7 +4,7 @@ obj-y := init.o fault.o ioremap.o extable.o pageattr.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o -obj-$(CONFIG_DISCONTIGMEM) += numa.o +obj-$(CONFIG_NUMA) += numa.o obj-$(CONFIG_K8_NUMA) += k8topology.o obj-$(CONFIG_ACPI_NUMA) += srat.o diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index 57d3ab15a5c7..493819e543a5 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -23,7 +23,6 @@ #include <linux/vt_kern.h> /* For unblank_screen() */ #include <linux/compiler.h> #include <linux/module.h> -#include <linux/kprobes.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -74,7 +73,7 @@ static noinline int is_prefetch(struct pt_regs *regs, unsigned long addr, instr = (unsigned char *)convert_rip_to_linear(current, regs); max_instr = instr + 15; - if ((regs->cs & 3) != 0 && instr >= (unsigned char *)TASK_SIZE) + if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE) return 0; while (scan_more && instr < max_instr) { @@ -106,7 +105,7 @@ static noinline int is_prefetch(struct pt_regs *regs, unsigned long addr, /* Could check the LDT for lm, but for now it's good enough to assume that long mode only uses well known segments or kernel. */ - scan_more = ((regs->cs & 3) == 0) || (regs->cs == __USER_CS); + scan_more = (!user_mode(regs)) || (regs->cs == __USER_CS); break; case 0x60: @@ -440,13 +439,13 @@ good_area: * the fault. */ switch (handle_mm_fault(mm, vma, address, write)) { - case 1: + case VM_FAULT_MINOR: tsk->min_flt++; break; - case 2: + case VM_FAULT_MAJOR: tsk->maj_flt++; break; - case 0: + case VM_FAULT_SIGBUS: goto do_sigbus; default: goto out_of_memory; diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index dbe53b4c7e66..72e4b364ed73 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -318,7 +318,7 @@ void zap_low_mappings(void) flush_tlb_all(); } -#ifndef CONFIG_DISCONTIGMEM +#ifndef CONFIG_NUMA void __init paging_init(void) { { @@ -427,13 +427,16 @@ void __init mem_init(void) reservedpages = 0; /* this will put all low memory onto the freelists */ -#ifdef CONFIG_DISCONTIGMEM +#ifdef CONFIG_NUMA totalram_pages += numa_free_all_bootmem(); tmp = 0; /* should count reserved pages here for all nodes */ #else + +#ifdef CONFIG_FLATMEM max_mapnr = end_pfn; if (!mem_map) BUG(); +#endif totalram_pages += free_all_bootmem(); @@ -515,7 +518,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) void __init reserve_bootmem_generic(unsigned long phys, unsigned len) { /* Should check here against the e820 map to avoid double free */ -#ifdef CONFIG_DISCONTIGMEM +#ifdef CONFIG_NUMA int nid = phys_to_nid(phys); reserve_bootmem_node(NODE_DATA(nid), phys, len); #else diff --git a/arch/x86_64/mm/ioremap.c b/arch/x86_64/mm/ioremap.c index 58aac23760ef..6972df480d2b 100644 --- a/arch/x86_64/mm/ioremap.c +++ b/arch/x86_64/mm/ioremap.c @@ -178,7 +178,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l if (phys_addr >= ISA_START_ADDRESS && last_addr < ISA_END_ADDRESS) return (__force void __iomem *)phys_to_virt(phys_addr); -#ifndef CONFIG_DISCONTIGMEM +#ifdef CONFIG_FLATMEM /* * Don't allow anybody to remap normal RAM that we're using.. */ diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index fd9f25d7a6c4..70cb2904a90f 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -36,36 +36,45 @@ int numa_off __initdata; int __init compute_hash_shift(struct node *nodes, int numnodes) { int i; - int shift = 24; - u64 addr; + int shift = 20; + unsigned long addr,maxend=0; - /* When in doubt use brute force. */ - while (shift < 48) { - memset(memnodemap,0xff,sizeof(*memnodemap) * NODEMAPSIZE); - for (i = 0; i < numnodes; i++) { - if (nodes[i].start == nodes[i].end) - continue; - for (addr = nodes[i].start; - addr < nodes[i].end; - addr += (1UL << shift)) { - if (memnodemap[addr >> shift] != 0xff && - memnodemap[addr >> shift] != i) { - printk(KERN_INFO - "node %d shift %d addr %Lx conflict %d\n", - i, shift, addr, memnodemap[addr>>shift]); - goto next; - } - memnodemap[addr >> shift] = i; + for (i = 0; i < numnodes; i++) + if ((nodes[i].start != nodes[i].end) && (nodes[i].end > maxend)) + maxend = nodes[i].end; + + while ((1UL << shift) < (maxend / NODEMAPSIZE)) + shift++; + + printk (KERN_DEBUG"Using %d for the hash shift. Max adder is %lx \n", + shift,maxend); + memset(memnodemap,0xff,sizeof(*memnodemap) * NODEMAPSIZE); + for (i = 0; i < numnodes; i++) { + if (nodes[i].start == nodes[i].end) + continue; + for (addr = nodes[i].start; + addr < nodes[i].end; + addr += (1UL << shift)) { + if (memnodemap[addr >> shift] != 0xff) { + printk(KERN_INFO + "Your memory is not aligned you need to rebuild your kernel " + "with a bigger NODEMAPSIZE shift=%d adder=%lu\n", + shift,addr); + return -1; } + memnodemap[addr >> shift] = i; } - return shift; - next: - shift++; } - memset(memnodemap,0,sizeof(*memnodemap) * NODEMAPSIZE); - return -1; + return shift; } +#ifdef CONFIG_SPARSEMEM +int early_pfn_to_nid(unsigned long pfn) +{ + return phys_to_nid(pfn << PAGE_SHIFT); +} +#endif + /* Initialize bootmem allocator for a node */ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) { @@ -80,6 +89,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long en start_pfn = start >> PAGE_SHIFT; end_pfn = end >> PAGE_SHIFT; + memory_present(nodeid, start_pfn, end_pfn); nodedata_phys = find_e820_area(start, end, pgdat_size); if (nodedata_phys == -1L) panic("Cannot find memory pgdat in node %d\n", nodeid); @@ -243,7 +253,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn) setup_node_bootmem(0, start_pfn << PAGE_SHIFT, end_pfn << PAGE_SHIFT); } -__init void numa_add_cpu(int cpu) +__cpuinit void numa_add_cpu(int cpu) { /* BP is initialized elsewhere */ if (cpu) diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c index 5d01b31472e1..8e3d097a9ddd 100644 --- a/arch/x86_64/mm/srat.c +++ b/arch/x86_64/mm/srat.c @@ -20,6 +20,9 @@ static struct acpi_table_slit *acpi_slit; +/* Internal processor count */ +static unsigned int __initdata num_processors = 0; + static nodemask_t nodes_parsed __initdata; static nodemask_t nodes_found __initdata; static struct node nodes[MAX_NUMNODES] __initdata; @@ -101,16 +104,18 @@ acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) bad_srat(); return; } - if (pa->apic_id >= NR_CPUS) { - printk(KERN_ERR "SRAT: lapic %u too large.\n", - pa->apic_id); + if (num_processors >= NR_CPUS) { + printk(KERN_ERR "SRAT: Processor #%d (lapic %u) INVALID. (Max ID: %d).\n", + num_processors, pa->apic_id, NR_CPUS); bad_srat(); return; } - cpu_to_node[pa->apic_id] = node; + cpu_to_node[num_processors] = node; acpi_numa = 1; - printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n", - pxm, pa->apic_id, node); + printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> CPU %u -> Node %u\n", + pxm, pa->apic_id, num_processors, node); + + num_processors++; } /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ @@ -124,7 +129,6 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) if (srat_disabled() || ma->flags.enabled == 0) return; - /* hotplug bit is ignored for now */ pxm = ma->proximity_domain; node = setup_node(pxm); if (node < 0) { @@ -134,6 +138,10 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) } start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32); end = start + (ma->length_lo | ((u64)ma->length_hi << 32)); + /* It is fine to add this area to the nodes data it will be used later*/ + if (ma->flags.hot_pluggable == 1) + printk(KERN_INFO "SRAT: hot plug zone found %lx - %lx \n", + start, end); i = conflicting_nodes(start, end); if (i >= 0) { printk(KERN_ERR diff --git a/arch/x86_64/pci/k8-bus.c b/arch/x86_64/pci/k8-bus.c index 62349c78db57..c2c38b579939 100644 --- a/arch/x86_64/pci/k8-bus.c +++ b/arch/x86_64/pci/k8-bus.c @@ -29,7 +29,7 @@ __init static int fill_mp_bus_to_cpumask(void) { struct pci_dev *nb_dev = NULL; - int i, j, printed; + int i, j; u32 ldtbus, nid; static int lbnr[3] = { LDT_BUS_NUMBER_REGISTER_0, @@ -53,25 +53,11 @@ fill_mp_bus_to_cpumask(void) for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus); j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus); j++) - pci_bus_to_cpumask[j] = - node_to_cpumask(NODE_ID(nid)); + pci_bus_to_node[j] = NODE_ID(nid); } } } - /* quick sanity check */ - printed = 0; - for (i = 0; i < 256; i++) { - if (cpus_empty(pci_bus_to_cpumask[i])) { - pci_bus_to_cpumask[i] = CPU_MASK_ALL; - if (printed) - continue; - printk(KERN_ERR - "k8-bus.c: some busses have empty cpu mask\n"); - printed = 1; - } - } - return 0; } diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index b693c232fd07..657e88aa0902 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -7,25 +7,50 @@ #include <linux/pci.h> #include <linux/init.h> +#include <linux/acpi.h> #include "pci.h" #define MMCONFIG_APER_SIZE (256*1024*1024) -/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ -u32 pci_mmcfg_base_addr; - /* Static virtual mapping of the MMCONFIG aperture */ -char *pci_mmcfg_virt; +struct mmcfg_virt { + struct acpi_table_mcfg_config *cfg; + char *virt; +}; +static struct mmcfg_virt *pci_mmcfg_virt; -static inline char *pci_dev_base(unsigned int bus, unsigned int devfn) +static char *get_virt(unsigned int seg, int bus) { - return pci_mmcfg_virt + ((bus << 20) | (devfn << 12)); + int cfg_num = -1; + struct acpi_table_mcfg_config *cfg; + + while (1) { + ++cfg_num; + if (cfg_num >= pci_mmcfg_config_num) { + /* something bad is going on, no cfg table is found. */ + /* so we fall back to the old way we used to do this */ + /* and just rely on the first entry to be correct. */ + return pci_mmcfg_virt[0].virt; + } + cfg = pci_mmcfg_virt[cfg_num].cfg; + if (cfg->pci_segment_group_number != seg) + continue; + if ((cfg->start_bus_number <= bus) && + (cfg->end_bus_number >= bus)) + return pci_mmcfg_virt[cfg_num].virt; + } +} + +static inline char *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn) +{ + + return get_virt(seg, bus) + ((bus << 20) | (devfn << 12)); } static int pci_mmcfg_read(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 *value) { - char *addr = pci_dev_base(bus, devfn); + char *addr = pci_dev_base(seg, bus, devfn); if (unlikely(!value || (bus > 255) || (devfn > 255) || (reg > 4095))) return -EINVAL; @@ -48,7 +73,7 @@ static int pci_mmcfg_read(unsigned int seg, unsigned int bus, static int pci_mmcfg_write(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 value) { - char *addr = pci_dev_base(bus,devfn); + char *addr = pci_dev_base(seg, bus, devfn); if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) return -EINVAL; @@ -75,9 +100,15 @@ static struct pci_raw_ops pci_mmcfg = { static int __init pci_mmcfg_init(void) { + int i; + if ((pci_probe & PCI_PROBE_MMCONF) == 0) return 0; - if (!pci_mmcfg_base_addr) + + acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg); + if ((pci_mmcfg_config_num == 0) || + (pci_mmcfg_config == NULL) || + (pci_mmcfg_config[0].base_address == 0)) return 0; /* Kludge for now. Don't use mmconfig on AMD systems because @@ -88,13 +119,22 @@ static int __init pci_mmcfg_init(void) return 0; /* RED-PEN i386 doesn't do _nocache right now */ - pci_mmcfg_virt = ioremap_nocache(pci_mmcfg_base_addr, MMCONFIG_APER_SIZE); - if (!pci_mmcfg_virt) { - printk("PCI: Cannot map mmconfig aperture\n"); + pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL); + if (pci_mmcfg_virt == NULL) { + printk("PCI: Can not allocate memory for mmconfig structures\n"); return 0; - } + } + for (i = 0; i < pci_mmcfg_config_num; ++i) { + pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i]; + pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address, MMCONFIG_APER_SIZE); + if (!pci_mmcfg_virt[i].virt) { + printk("PCI: Cannot map mmconfig aperture for segment %d\n", + pci_mmcfg_config[i].pci_segment_group_number); + return 0; + } + printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[i].base_address); + } - printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_base_addr); raw_pci_ops = &pci_mmcfg; pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig new file mode 100644 index 000000000000..2b6257bec4c3 --- /dev/null +++ b/arch/xtensa/Kconfig @@ -0,0 +1,262 @@ +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/config-language.txt. + +mainmenu "Linux/Xtensa Kernel Configuration" + +config FRAME_POINTER + bool + default n + +config XTENSA + bool + default y + help + Xtensa processors are 32-bit RISC machines designed by Tensilica + primarily for embedded systems. These processors are both + configurable and extensible. The Linux port to the Xtensa + architecture supports all processor configurations and extensions, + with reasonable minimum requirements. The Xtensa Linux project has + a home page at <http://xtensa.sourceforge.net/>. + +config UID16 + bool + default n + +config RWSEM_XCHGADD_ALGORITHM + bool + default y + +config HAVE_DEC_LOCK + bool + default y + +config GENERIC_HARDIRQS + bool + default y + +source "init/Kconfig" + +menu "Processor type and features" + +choice + prompt "Xtensa Processor Configuration" + default XTENSA_CPU_LINUX_BE + +config XTENSA_CPU_LINUX_BE + bool "linux_be" + ---help--- + The linux_be processor configuration is the baseline Xtensa + configurations included in this kernel and also used by + binutils, gcc, and gdb. It contains no TIE, no coprocessors, + and the following configuration options: + + Code Density Option 2 Misc Special Registers + NSA/NSAU Instructions 128-bit Data Bus Width + Processor ID 8K, 2-way I and D Caches + Zero-Overhead Loops 2 Inst Address Break Registers + Big Endian 2 Data Address Break Registers + 64 General-Purpose Registers JTAG Interface and Trace Port + 17 Interrupts MMU w/ TLBs and Autorefill + 3 Interrupt Levels 8 Autorefill Ways (I/D TLBs) + 3 Timers Unaligned Exceptions +endchoice + +config MMU + bool + default y + +config XTENSA_UNALIGNED_USER + bool "Unaligned memory access in use space" + ---help--- + The Xtensa architecture currently does not handle unaligned + memory accesses in hardware but through an exception handler. + Per default, unaligned memory accesses are disabled in user space. + + Say Y here to enable unaligned memory access in user space. + +config PREEMPT + bool "Preemptible Kernel" + ---help--- + This option reduces the latency of the kernel when reacting to + real-time or interactive events by allowing a low priority process to + be preempted even if it is in kernel mode executing a system call. + Unfortunately the kernel code has some race conditions if both + CONFIG_SMP and CONFIG_PREEMPT are enabled, so this option is + currently disabled if you are building an SMP kernel. + + Say Y here if you are building a kernel for a desktop, embedded + or real-time system. Say N if you are unsure. + +config MATH_EMULATION + bool "Math emulation" + help + Can we use information of configuration file? + +config HIGHMEM + bool "High memory support" + +endmenu + +menu "Platform options" + +choice + prompt "Xtensa System Type" + default XTENSA_PLATFORM_ISS + +config XTENSA_PLATFORM_ISS + bool "ISS" + help + ISS is an acronym for Tensilica's Instruction Set Simulator. + +config XTENSA_PLATFORM_XT2000 + bool "XT2000" + help + XT2000 is the name of Tensilica's feature-rich emulation platform. + This hardware is capable of running a full Linux distribution. + +endchoice + + +config XTENSA_CALIBRATE_CCOUNT + bool "Auto calibration of the CPU clock rate" + ---help--- + On some platforms (XT2000, for example), the CPU clock rate can + vary. The frequency can be determined, however, by measuring + against a well known, fixed frequency, such as an UART oscillator. + +config XTENSA_CPU_CLOCK + int "CPU clock rate [MHz]" + depends on !XTENSA_CALIBRATE_CCOUNT + default "16" + +config GENERIC_CALIBRATE_DELAY + bool "Auto calibration of the BogoMIPS value" + ---help--- + The BogoMIPS value can easily be derived from the CPU frequency. + +config CMDLINE_BOOL + bool "Default bootloader kernel arguments" + +config CMDLINE + string "Initial kernel command string" + depends on CMDLINE_BOOL + default "console=ttyS0,38400 root=/dev/ram" + help + On some architectures (EBSA110 and CATS), there is currently no way + for the boot loader to pass arguments to the kernel. For these + architectures, you should supply some command-line options at build + time by entering them here. As a minimum, you should specify the + memory size and the root device (e.g., mem=64M root=/dev/nfs). + +config SERIAL_CONSOLE + bool + depends on XTENSA_PLATFORM_ISS + default y + +config XTENSA_ISS_NETWORK + bool + depends on XTENSA_PLATFORM_ISS + default y + +source "mm/Kconfig" + +endmenu + +menu "Bus options" + +config PCI + bool "PCI support" if !XTENSA_PLATFORM_ISS + depends on !XTENSA_PLATFORM_ISS + default y + help + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside + your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or + VESA. If you have PCI, say Y, otherwise N. + + The PCI-HOWTO, available from + <http://www.linuxdoc.org/docs.html#howto>, contains valuable + information about which PCI hardware does work under Linux and which + doesn't + +source "drivers/pci/Kconfig" + +config HOTPLUG + + bool "Support for hot-pluggable devices" + ---help--- + Say Y here if you want to plug devices into your computer while + the system is running, and be able to use them quickly. In many + cases, the devices can likewise be unplugged at any time too. + + One well known example of this is PCMCIA- or PC-cards, credit-card + size devices such as network cards, modems or hard drives which are + plugged into slots found on all modern laptop computers. Another + example, used on modern desktops as well as laptops, is USB. + + Enable HOTPLUG and KMOD, and build a modular kernel. Get agent + software (at <http://linux-hotplug.sourceforge.net/>) and install it. + Then your kernel will automatically call out to a user mode "policy + agent" (/sbin/hotplug) to load modules and set up software needed + to use devices as you hotplug them. + +source "drivers/pcmcia/Kconfig" + +source "drivers/pci/hotplug/Kconfig" + +endmenu + +menu "Exectuable file formats" + +# only elf supported +config KCORE_ELF + bool + depends on PROC_FS + default y + help + If you enabled support for /proc file system then the file + /proc/kcore will contain the kernel core image in ELF format. This + can be used in gdb: + + $ cd /usr/src/linux ; gdb vmlinux /proc/kcore + + This is especially useful if you have compiled the kernel with the + "-g" option to preserve debugging information. It is mainly used + for examining kernel data structures on the live kernel. + +source "fs/Kconfig.binfmt" + +endmenu + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "fs/Kconfig" + +menu "Xtensa initrd options" + depends on BLK_DEV_INITRD + + config EMBEDDED_RAMDISK + bool "Embed root filesystem ramdisk into the kernel" + +config EMBEDDED_RAMDISK_IMAGE + string "Filename of gziped ramdisk image" + depends on EMBEDDED_RAMDISK + default "ramdisk.gz" + help + This is the filename of the ramdisk image to be built into the + kernel. Relative pathnames are relative to arch/xtensa/boot/ramdisk/. + The ramdisk image is not part of the kernel distribution; you must + provide one yourself. +endmenu + +source "arch/xtensa/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" + + diff --git a/arch/xtensa/Kconfig.debug b/arch/xtensa/Kconfig.debug new file mode 100644 index 000000000000..11c585295dd7 --- /dev/null +++ b/arch/xtensa/Kconfig.debug @@ -0,0 +1,7 @@ +menu "Kernel hacking" + +source "lib/Kconfig.debug" + +endmenu + + diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile new file mode 100644 index 000000000000..27847e4ffcbf --- /dev/null +++ b/arch/xtensa/Makefile @@ -0,0 +1,104 @@ +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2001 - 2005 Tensilica Inc. +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. Remember to do have actions +# for "archclean" and "archdep" for cleaning up and making dependencies for +# this architecture + +# Core configuration. +# (Use CPU=<xtensa_config> to use another default compiler.) + +cpu-$(CONFIG_XTENSA_CPU_LINUX_BE) := linux_be +cpu-$(CONFIG_XTENSA_CPU_LINUX_CUSTOM) := linux_custom + +CPU = $(cpu-y) +export CPU + +# Platform configuration + +platform-$(CONFIG_XTENSA_PLATFORM_XT2000) := xt2000 +platform-$(CONFIG_XTENSA_PLATFORM_ISS) := iss + +PLATFORM = $(platform-y) +export PLATFORM + +CPPFLAGS += $(if $(KBUILD_SRC),-I$(srctree)/include/asm-xtensa/) +CPPFLAGS += -Iinclude/asm +CFLAGS += -pipe -mlongcalls + +KBUILD_DEFCONFIG := iss_defconfig + +# ramdisk/initrd support +# You need a compressed ramdisk image, named ramdisk.gz in +# arch/xtensa/boot/ramdisk + +core-$(CONFIG_EMBEDDED_RAMDISK) += arch/xtensa/boot/ramdisk/ + +# Test for cross compiling + +ifneq ($(CPU),) + COMPILE_ARCH = $(shell uname -m) + + ifneq ($(COMPILE_ARCH), xtensa) + ifndef CROSS_COMPILE + CROSS_COMPILE = xtensa_$(CPU)- + endif + endif +endif + +# + +LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) + +head-y := arch/xtensa/kernel/head.o +core-y += arch/xtensa/kernel/ arch/xtensa/mm/ +ifneq ($(PLATFORM),) +core-y += arch/xtensa/platform-$(PLATFORM)/ +endif +libs-y += arch/xtensa/lib/ $(LIBGCC) + +boot := arch/xtensa/boot + +archinc := include/asm-xtensa + +arch/xtensa/kernel/asm-offsets.s: \ + arch/xtensa/kernel/asm-offsets.c $(archinc)/.platform + +include/asm-xtensa/offsets.h: arch/xtensa/kernel/asm-offsets.s + $(call filechk,gen-asm-offsets) + +prepare: $(archinc)/.platform $(archinc)/offsets.h + +# Update machine cpu and platform symlinks if something which affects +# them changed. + +$(archinc)/.platform: $(wildcard include/config/arch/*.h) include/config/MARKER + @echo ' SYMLINK $(archinc)/xtensa/config -> $(archinc)/xtensa/config-$(CPU)' + $(Q)mkdir -p $(archinc) + $(Q)mkdir -p $(archinc)/xtensa + $(Q)ln -fsn $(srctree)/$(archinc)/xtensa/config-$(CPU) $(archinc)/xtensa/config + @echo ' SYMLINK $(archinc)/platform -> $(archinc)/platform-$(PLATFORM)' + $(Q)ln -fsn $(srctree)/$(archinc)/platform-$(PLATFORM) $(archinc)/platform + @touch $@ + + +all: zImage + +bzImage : zImage + +zImage zImage.initrd: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $@ + +CLEAN_FILES += arch/xtensa/vmlinux.lds $(archinc)/offset.h \ + $(archinc)/platform $(archinc)/xtensa/config \ + $(archinc)/.platform + +define archhelp + @echo '* zImage - Compressed kernel image (arch/xtensa/boot/images/zImage.*)' +endef + diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile new file mode 100644 index 000000000000..820b31d10ae4 --- /dev/null +++ b/arch/xtensa/boot/Makefile @@ -0,0 +1,33 @@ +# +# arch/xtensa/boot/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# + + +CFLAGS += -fno-builtin -Iarch/$(ARCH)/boot/include +HOSTFLAGS += -Iarch/$(ARCH)/boot/include + +BIG_ENDIAN := $(shell echo -e __XTENSA_EB__ | $(CC) -E - | grep -v "\#") + +export CFLAGS +export AFLAGS +export BIG_ENDIAN + +subdir-y := lib + +# Subdirs for the boot loader(s) + +bootdir-$(CONFIG_XTENSA_PLATFORM_ISS) += boot-elf +bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf + + +zImage zImage.initrd Image Image.initrd: $(bootdir-y) + +$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \ + $(addprefix $(obj)/,$(host-progs)) + $(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS) + diff --git a/arch/xtensa/boot/boot-elf/Makefile b/arch/xtensa/boot/boot-elf/Makefile new file mode 100644 index 000000000000..734db7f76583 --- /dev/null +++ b/arch/xtensa/boot/boot-elf/Makefile @@ -0,0 +1,52 @@ +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# + +GZIP = gzip +GZIP_FLAGS = -v9fc + +ifeq ($(BIG_ENDIAN),1) +OBJCOPY_ARGS := -O elf32-xtensa-be +else +OBJCOPY_ARGS := -O elf32-xtensa-le +endif + +export OBJCOPY_ARGS + +boot-y := bootstrap.o + +OBJS := $(addprefix $(obj)/,$(boot-y)) + +Image: vmlinux $(OBJS) + $(OBJCOPY) --strip-all -R .comment -R .xt.insn -O binary \ + vmlinux vmlinux.tmp + $(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \ + --add-section image=vmlinux.tmp \ + --set-section-flags image=contents,alloc,load,load,data \ + $(OBJS) $@.tmp + $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) \ + -T $(srctree)/arch/$(ARCH)/boot/boot-elf/boot.ld \ + -o arch/$(ARCH)/boot/$@.elf $@.tmp + rm -f $@.tmp vmlinux.tmp + +Image.initrd: vmlinux $(OBJS) + $(OBJCOPY) --strip-all -R .comment -R .xt.insn -O binary \ + --add-section .initrd=arch/$(ARCH)/boot/ramdisk \ + --set-section-flags .initrd=contents,alloc,load,load,data \ + vmlinux vmlinux.tmp + $(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \ + --add-section image=vmlinux.tmp \ + --set-section-flags image=contents,alloc,load,load,data \ + $(OBJS) $@.tmp + $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) \ + -T $(srctree)/arch/$(ARCH)/boot/boot-elf/boot.ld \ + -o arch/$(ARCH)/boot/$@.elf $@.tmp + rm -f $@.tmp vmlinux.tmp + + +zImage: Image + +zImage.initrd: Image.initrd + diff --git a/arch/xtensa/boot/boot-elf/boot.ld b/arch/xtensa/boot/boot-elf/boot.ld new file mode 100644 index 000000000000..4ab06a0a7a6b --- /dev/null +++ b/arch/xtensa/boot/boot-elf/boot.ld @@ -0,0 +1,71 @@ +OUTPUT_ARCH(xtensa) + +SECTIONS +{ + .start 0xD0000000 : { *(.start) } + + .text 0xD0000000: + { + __reloc_start = . ; + _text_start = . ; + *(.literal .text.literal .text) + _text_end = . ; + } + + .rodata ALIGN(0x04): + { + *(.rodata) + *(.rodata1) + } + + .data ALIGN(0x04): + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.got.plt) + *(.got) + *(.dynamic) + } + + __reloc_end = . ; + + .initrd ALIGN(0x10) : + { + boot_initrd_start = . ; + *(.initrd) + boot_initrd_end = .; + } + + . = ALIGN(0x10); + __image_load = . ; + .image 0xd0001000: + { + _image_start = .; + *(image) + . = (. + 3) & ~ 3; + _image_end = . ; + } + + + .bss ((LOADADDR(.image) + SIZEOF(.image) + 3) & ~ 3): + { + __bss_start = .; + *(.sbss) + *(.scommon) + *(.dynbss) + *(.bss) + __bss_end = .; + } + _end = .; + _param_start = .; + + .ResetVector.text 0xfe000020 : + { + *(.ResetVector.text) + } + + + PROVIDE (end = .); +} diff --git a/arch/xtensa/boot/boot-elf/bootstrap.S b/arch/xtensa/boot/boot-elf/bootstrap.S new file mode 100644 index 000000000000..7cba94abdab8 --- /dev/null +++ b/arch/xtensa/boot/boot-elf/bootstrap.S @@ -0,0 +1,37 @@ + +#include <xtensa/config/specreg.h> +#include <xtensa/config/core.h> + +#include <linux/config.h> +#include <asm/bootparam.h> + + +/* ResetVector + */ + .section .ResetVector.text, "ax" + .global _ResetVector +_ResetVector: + _j reset + .align 4 +RomInitAddr: + .word 0xd0001000 +RomBootParam: + .word _bootparam +reset: + l32r a0, RomInitAddr + l32r a2, RomBootParam + movi a3, 0 + movi a4, 0 + jx a0 + + .align 4 + .section .bootstrap.data, "aw" + + .globl _bootparam +_bootparam: + .short BP_TAG_FIRST + .short 4 + .long BP_VERSION + .short BP_TAG_LAST + .short 0 + .long 0 diff --git a/arch/xtensa/boot/boot-redboot/Makefile b/arch/xtensa/boot/boot-redboot/Makefile new file mode 100644 index 000000000000..f53262c2e1f3 --- /dev/null +++ b/arch/xtensa/boot/boot-redboot/Makefile @@ -0,0 +1,35 @@ +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# + +GZIP = gzip +GZIP_FLAGS = -v9fc +ifeq ($(BIG_ENDIAN),1) +OBJCOPY_ARGS := -O elf32-xtensa-be +else +OBJCOPY_ARGS := -O elf32-xtensa-le +endif + +LD_ARGS = -T $(srctree)/$(obj)/boot.ld + +boot-y := bootstrap.o + +OBJS := $(addprefix $(obj)/,$(boot-y)) +LIBS := arch/xtensa/boot/lib/lib.a arch/xtensa/lib/lib.a + +LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) + +zImage: vmlinux $(OBJS) $(LIBS) + $(OBJCOPY) --strip-all -R .comment -R .xt.insn -O binary \ + vmlinux vmlinux.tmp + gzip -vf9 vmlinux.tmp + $(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \ + --add-section image=vmlinux.tmp.gz \ + --set-section-flags image=contents,alloc,load,load,data \ + $(OBJS) $@.tmp + $(LD) $(LD_ARGS) -o $@.elf $@.tmp $(LIBS) -L/xtensa-elf/lib $(LIBGCC) + $(OBJCOPY) -S -O binary $@.elf arch/$(ARCH)/boot/$@.redboot + rm -f $@.tmp $@.elf vmlinux.tmp.gz + diff --git a/arch/xtensa/boot/boot-redboot/boot.ld b/arch/xtensa/boot/boot-redboot/boot.ld new file mode 100644 index 000000000000..65b726410e8a --- /dev/null +++ b/arch/xtensa/boot/boot-redboot/boot.ld @@ -0,0 +1,66 @@ +OUTPUT_ARCH(xtensa) + +SECTIONS +{ + .start 0xD0200000 : { *(.start) } + + .text : + { + __reloc_start = . ; + _text_start = . ; + *(.literal .text.literal .text) + _text_end = . ; + } + + .rodata ALIGN(0x04): + { + *(.rodata) + *(.rodata1) + } + + .data ALIGN(0x04): + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.got.plt) + *(.got) + *(.dynamic) + } + + __reloc_end = . ; + + .initrd ALIGN(0x10) : + { + boot_initrd_start = . ; + *(.initrd) + boot_initrd_end = .; + } + + . = ALIGN(0x10); + __image_load = . ; + .image 0xd0001000: AT(__image_load) + { + _image_start = .; + *(image) + . = (. + 3) & ~ 3; + _image_end = . ; + } + + + .bss ((LOADADDR(.image) + SIZEOF(.image) + 3) & ~ 3): + { + __bss_start = .; + *(.sbss) + *(.scommon) + *(.dynbss) + *(.bss) + __bss_end = .; + } + _end = .; + _param_start = .; + + + PROVIDE (end = .); +} diff --git a/arch/xtensa/boot/boot-redboot/bootstrap.S b/arch/xtensa/boot/boot-redboot/bootstrap.S new file mode 100644 index 000000000000..ee636b0da81c --- /dev/null +++ b/arch/xtensa/boot/boot-redboot/bootstrap.S @@ -0,0 +1,246 @@ + +#define _ASMLANGUAGE +#include <xtensa/config/specreg.h> +#include <xtensa/config/core.h> +#include <xtensa/cacheasm.h> + + /* + * RB-Data: RedBoot data/bss + * P: Boot-Parameters + * L: Kernel-Loader + * + * The Linux-Kernel image including the loader must be loaded + * to a position so that the kernel and the boot parameters + * can fit in the space before the load address. + * ______________________________________________________ + * |_RB-Data_|_P_|__________|_L_|___Linux-Kernel___|______| + * ^ + * ^ Load address + * ______________________________________________________ + * |___Linux-Kernel___|_P_|_L_|___________________________| + * + * The loader copies the parameter to the position that will + * be the end of the kernel and itself to the end of the + * parameter list. + */ + +/* Make sure we have enough space for the 'uncompressor' */ + +#define STACK_SIZE 32768 +#define HEAP_SIZE (131072*4) + + # a2: Parameter list + # a3: Size of parameter list + + .section .start, "ax" + + .globl __start + /* this must be the first byte of the loader! */ +__start: + entry sp, 32 # we do not intend to return + _call0 _start +__start_a0: + .align 4 + + .section .text, "ax" + .begin literal_prefix .text + + /* put literals in here! */ + + .globl _start +_start: + + /* 'reset' window registers */ + + movi a4, 1 + wsr a4, PS + rsync + + rsr a5, WINDOWBASE + ssl a5 + sll a4, a4 + wsr a4, WINDOWSTART + rsync + + movi a4, 0x00040000 + wsr a4, PS + rsync + + /* copy the loader to its address + * Note: The loader itself is a very small piece, so we assume we + * don't partially overlap. We also assume (even more important) + * that the kernel image is out of the way. Usually, when the + * load address of this image is not at an arbitrary address, + * but aligned to some 10K's we shouldn't overlap. + */ + + /* Note: The assembler cannot relax "addi a0, a0, ..." to an + l32r, so we load to a4 first. */ + + addi a4, a0, __start - __start_a0 + mov a0, a4 + movi a4, __start + movi a5, __reloc_end + + # a0: address where this code has been loaded + # a4: compiled address of __start + # a5: compiled end address + + mov.n a7, a0 + mov.n a8, a4 + +1: + l32i a10, a7, 0 + l32i a11, a7, 4 + s32i a10, a8, 0 + s32i a11, a8, 4 + l32i a10, a7, 8 + l32i a11, a7, 12 + s32i a10, a8, 8 + s32i a11, a8, 12 + addi a8, a8, 16 + addi a7, a7, 16 + blt a8, a5, 1b + + + /* We have to flush and invalidate the caches here before we jump. */ + +#if XCHAL_DCACHE_IS_WRITEBACK + dcache_writeback_all a5, a6 +#endif + icache_invalidate_all a5, a6 + + movi a11, _reloc + jx a11 + + .globl _reloc +_reloc: + + /* RedBoot is now at the end of the memory, so we don't have + * to copy the parameter list. Keep the code around; in case + * we need it again. */ +#if 0 + # a0: load address + # a2: start address of parameter list + # a3: length of parameter list + # a4: __start + + /* copy the parameter list out of the way */ + + movi a6, _param_start + add a3, a2, a3 +2: + l32i a8, a2, 0 + s32i a8, a6, 0 + addi a2, a2, 4 + addi a6, a6, 4 + blt a2, a3, 2b +#endif + + /* clear BSS section */ + movi a6, __bss_start + movi a7, __bss_end + movi.n a5, 0 +3: + s32i a5, a6, 0 + addi a6, a6, 4 + blt a6, a7, 3b + + movi a5, -16 + movi a1, _stack + STACK_SIZE + and a1, a1, a5 + + /* Uncompress the kernel */ + + # a0: load address + # a2: boot parameter + # a4: __start + + movi a3, __image_load + sub a4, a3, a4 + add a8, a0, a4 + + # a1 Stack + # a8(a4) Load address of the image + + movi a6, _image_start + movi a10, _image_end + movi a7, 0x1000000 + sub a11, a10, a6 + movi a9, complen + s32i a11, a9, 0 + + movi a0, 0 + + # a6 destination + # a7 maximum size of destination + # a8 source + # a9 ptr to length + + .extern gunzip + movi a4, gunzip + beqz a4, 1f + + callx4 a4 + + j 2f + + + # a6 destination start + # a7 maximum size of destination + # a8 source start + # a9 ptr to length + # a10 destination end + +1: + l32i a9, a8, 0 + l32i a11, a8, 4 + s32i a9, a6, 0 + s32i a11, a6, 4 + l32i a9, a8, 8 + l32i a11, a8, 12 + s32i a9, a6, 8 + s32i a11, a6, 12 + addi a6, a6, 16 + addi a8, a8, 16 + blt a6, a10, 1b + + + /* jump to the kernel */ +2: +#if XCHAL_DCACHE_IS_WRITEBACK + dcache_writeback_all a5, a6 +#endif + icache_invalidate_all a5, a6 + + movi a5, __start + movi a3, boot_initrd_start + movi a4, boot_initrd_end + sub a3, a3, a5 + sub a4, a4, a5 + add a3, a0, a3 + add a4, a0, a4 + + # a2 Boot parameter list + # a3 initrd_start (virtual load address) + # a4 initrd_end (virtual load address) + + movi a0, _image_start + jx a0 + + .align 16 + .data + .globl avail_ram +avail_ram: + .long _heap + .globl end_avail +end_avail: + .long _heap + HEAP_SIZE + + .comm _stack, STACK_SIZE + .comm _heap, HEAP_SIZE + + .globl end_avail + .comm complen, 4 + + .end literal_prefix diff --git a/arch/xtensa/boot/lib/Makefile b/arch/xtensa/boot/lib/Makefile new file mode 100644 index 000000000000..9e73bb8aeb7a --- /dev/null +++ b/arch/xtensa/boot/lib/Makefile @@ -0,0 +1,17 @@ +# +# Makefile for some libs needed by zImage. +# + +zlib := infblock.c infcodes.c inffast.c inflate.c inftrees.c infutil.c + +lib-y += $(zlib:.c=.o) zmem.o + +EXTRA_CFLAGS += -Ilib/zlib_inflate + +quiet_cmd_copy_zlib = COPY $@ + cmd_copy_zlib = cat $< > $@ + +$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/% + $(call cmd,copy_zlib) + +clean-files := $(zlib) diff --git a/arch/xtensa/boot/lib/zmem.c b/arch/xtensa/boot/lib/zmem.c new file mode 100644 index 000000000000..d9862aa8ca25 --- /dev/null +++ b/arch/xtensa/boot/lib/zmem.c @@ -0,0 +1,79 @@ +#include <linux/zlib.h> + +/* bits taken from ppc */ + +extern void *avail_ram, *end_avail; + +void exit (void) +{ + for (;;); +} + +void *zalloc(unsigned size) +{ + void *p = avail_ram; + + size = (size + 7) & -8; + avail_ram += size; + if (avail_ram > end_avail) { + //puts("oops... out of memory\n"); + //pause(); + exit (); + } + return p; +} + +#define HEAD_CRC 2 +#define EXTRA_FIELD 4 +#define ORIG_NAME 8 +#define COMMENT 0x10 +#define RESERVED 0xe0 + +#define DEFLATED 8 + +void gunzip (void *dst, int dstlen, unsigned char *src, int *lenp) +{ + z_stream s; + int r, i, flags; + + /* skip header */ + i = 10; + flags = src[3]; + if (src[2] != DEFLATED || (flags & RESERVED) != 0) { + //puts("bad gzipped data\n"); + exit(); + } + if ((flags & EXTRA_FIELD) != 0) + i = 12 + src[10] + (src[11] << 8); + if ((flags & ORIG_NAME) != 0) + while (src[i++] != 0) + ; + if ((flags & COMMENT) != 0) + while (src[i++] != 0) + ; + if ((flags & HEAD_CRC) != 0) + i += 2; + if (i >= *lenp) { + //puts("gunzip: ran out of data in header\n"); + exit(); + } + + s.workspace = zalloc(zlib_inflate_workspacesize()); + r = zlib_inflateInit2(&s, -MAX_WBITS); + if (r != Z_OK) { + //puts("inflateInit2 returned "); puthex(r); puts("\n"); + exit(); + } + s.next_in = src + i; + s.avail_in = *lenp - i; + s.next_out = dst; + s.avail_out = dstlen; + r = zlib_inflate(&s, Z_FINISH); + if (r != Z_OK && r != Z_STREAM_END) { + //puts("inflate returned "); puthex(r); puts("\n"); + exit(); + } + *lenp = s.next_out - (unsigned char *) dst; + zlib_inflateEnd(&s); +} + diff --git a/arch/xtensa/boot/ramdisk/Makefile b/arch/xtensa/boot/ramdisk/Makefile new file mode 100644 index 000000000000..b12f76352438 --- /dev/null +++ b/arch/xtensa/boot/ramdisk/Makefile @@ -0,0 +1,23 @@ +# +# Makefile for a ramdisk image +# + +BIG_ENDIAN := $(shell echo -e "\#ifdef __XTENSA_EL__\nint little;\n\#else\nint big;\n\#endif" | $(CC) -E -|grep -c big) + +ifeq ($(BIG_ENDIAN),1) +OBJCOPY_ARGS := -O elf32-xtensa-be +else +OBJCOPY_ARGS := -O elf32-xtensa-le +endif + +obj-y = ramdisk.o + +RAMDISK_IMAGE = arch/$(ARCH)/boot/ramdisk/$(CONFIG_EMBEDDED_RAMDISK_IMAGE) + +arch/$(ARCH)/boot/ramdisk/ramdisk.o: + $(Q)echo -e "dummy:" | $(AS) -o $@; + $(Q)$(OBJCOPY) $(OBJCOPY_ARGS) \ + --add-section .initrd=$(RAMDISK_IMAGE) \ + --set-section-flags .initrd=contents,alloc,load,load,data \ + arch/$(ARCH)/boot/ramdisk/ramdisk.o $@ + diff --git a/arch/xtensa/configs/common_defconfig b/arch/xtensa/configs/common_defconfig new file mode 100644 index 000000000000..1d230ee081b4 --- /dev/null +++ b/arch/xtensa/configs/common_defconfig @@ -0,0 +1,662 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-rc2 +# Tue Mar 1 16:36:53 2005 +# +# CONFIG_FRAME_POINTER is not set +CONFIG_XTENSA=y +# CONFIG_UID16 is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_GENERIC_HARDIRQS=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Processor type and features +# +CONFIG_XTENSA_ARCH_LINUX_BE=y +# CONFIG_XTENSA_ARCH_LINUX_LE is not set +# CONFIG_XTENSA_ARCH_LINUX_TEST is not set +# CONFIG_XTENSA_ARCH_S5 is not set +# CONFIG_XTENSA_CUSTOM is not set +CONFIG_MMU=y +# CONFIG_XTENSA_UNALIGNED_USER is not set +# CONFIG_PREEMPT is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_HIGHMEM is not set + +# +# Platform options +# +# CONFIG_XTENSA_PLATFORM_ISS is not set +CONFIG_XTENSA_PLATFORM_XT2000=y +CONFIG_XTENSA_CALIBRATE_CCOUNT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,38400 ip=bootp root=nfs nfsroot=/opt/montavista/pro/devkit/xtensa/linux_be/target" + +# +# Bus options +# +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set +# CONFIG_PCI_NAMES is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Exectuable file formats +# +CONFIG_KCORE_ELF=y +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CLK_JIFFIES=y +# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set +# CONFIG_NET_SCH_CLK_CPU is not set +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +# CONFIG_NET_SCH_HFSC is not set +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +# CONFIG_NET_SCH_NETEM is not set +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_QOS=y +CONFIG_NET_ESTIMATOR=y +CONFIG_NET_CLS=y +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +# CONFIG_CLS_U32_PERF is not set +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_POLICE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +CONFIG_XT2000_SONIC=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +CONFIG_STRIP=m + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_HERMES=m +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_PCI_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_SYSFS=y +CONFIG_DEVFS_FS=y +# CONFIG_DEVFS_MOUNT is not set +# CONFIG_DEVFS_DEBUG is not set +# CONFIG_DEVPTS_FS_XATTR is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +# CONFIG_EXPORTFS is not set +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Kernel hacking +# +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_MAGIC_SYSRQ=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig new file mode 100644 index 000000000000..802621dd4867 --- /dev/null +++ b/arch/xtensa/configs/iss_defconfig @@ -0,0 +1,531 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-rc2 +# Fri Feb 25 19:21:24 2005 +# +CONFIG_FRAME_POINTER=y +CONFIG_XTENSA=y +# CONFIG_UID16 is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_GENERIC_HARDIRQS=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +# CONFIG_KOBJECT_UEVENT is not set +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Processor type and features +# +CONFIG_XTENSA_ARCH_LINUX_BE=y +# CONFIG_XTENSA_ARCH_LINUX_LE is not set +# CONFIG_XTENSA_ARCH_LINUX_TEST is not set +# CONFIG_XTENSA_ARCH_S5 is not set +# CONFIG_XTENSA_CUSTOM is not set +CONFIG_MMU=y +# CONFIG_XTENSA_UNALIGNED_USER is not set +# CONFIG_PREEMPT is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_HIGHMEM is not set + +# +# Platform options +# +CONFIG_XTENSA_PLATFORM_ISS=y +# CONFIG_XTENSA_PLATFORM_XT2000 is not set +# CONFIG_XTENSA_PLATFORM_ARUBA is not set +# CONFIG_XTENSA_CALIBRATE_CCOUNT is not set +CONFIG_XTENSA_CPU_CLOCK=10 +# CONFIG_GENERIC_CALIBRATE_DELAY is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target" +CONFIG_SERIAL_CONSOLE=y +CONFIG_XTENSA_ISS_NETWORK=y + +# +# Bus options +# + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# + +# +# Exectuable file formats +# +CONFIG_KCORE_ELF=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +# CONFIG_SCTP_HMAC_MD5 is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_SCH_CLK_JIFFIES is not set +# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set +# CONFIG_NET_SCH_CLK_CPU is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_NETDEVICES is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +# CONFIG_SERIO is not set +# CONFIG_SERIO_I8042 is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=y +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +# CONFIG_DEVFS_DEBUG is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +CONFIG_NFS_DIRECTIO=y +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +# CONFIG_EXPORTFS is not set +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Kernel hacking +# +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile new file mode 100644 index 000000000000..d573017a5dde --- /dev/null +++ b/arch/xtensa/kernel/Makefile @@ -0,0 +1,18 @@ +# +# Makefile for the Linux/Xtensa kernel. +# + +extra-y := head.o vmlinux.lds + + +obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o semaphore.o \ + setup.o signal.o syscalls.o time.o traps.o vectors.o platform.o \ + pci-dma.o + +## windowspill.o + +obj-$(CONFIG_KGDB) += xtensa-stub.o +obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o + + diff --git a/arch/xtensa/kernel/align.S b/arch/xtensa/kernel/align.S new file mode 100644 index 000000000000..74b1e90ef08c --- /dev/null +++ b/arch/xtensa/kernel/align.S @@ -0,0 +1,459 @@ +/* + * arch/xtensa/kernel/align.S + * + * Handle unalignment exceptions in kernel space. + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2001 - 2005 Tensilica, Inc. + * + * Rewritten by Chris Zankel <chris@zankel.net> + * + * Based on work from Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> + * and Marc Gauthier <marc@tensilica.com, marc@alimni.uwaterloo.ca> + */ + +#include <linux/linkage.h> +#include <asm/ptrace.h> +#include <asm/ptrace.h> +#include <asm/current.h> +#include <asm/offsets.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/page.h> +#include <asm/thread_info.h> + +#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION + +/* First-level exception handler for unaligned exceptions. + * + * Note: This handler works only for kernel exceptions. Unaligned user + * access should get a seg fault. + */ + +/* Big and little endian 16-bit values are located in + * different halves of a register. HWORD_START helps to + * abstract the notion of extracting a 16-bit value from a + * register. + * We also have to define new shifting instructions because + * lsb and msb are on 'opposite' ends in a register for + * different endian machines. + * + * Assume a memory region in ascending address: + * 0 1 2 3|4 5 6 7 + * + * When loading one word into a register, the content of that register is: + * LE 3 2 1 0, 7 6 5 4 + * BE 0 1 2 3, 4 5 6 7 + * + * Masking the bits of the higher/lower address means: + * LE X X 0 0, 0 0 X X + * BE 0 0 X X, X X 0 0 + * + * Shifting to higher/lower addresses, means: + * LE shift left / shift right + * BE shift right / shift left + * + * Extracting 16 bits from a 32 bit reg. value to higher/lower address means: + * LE mask 0 0 X X / shift left + * BE shift left / mask 0 0 X X + */ + +#define UNALIGNED_USER_EXCEPTION + +#if XCHAL_HAVE_BE + +#define HWORD_START 16 +#define INSN_OP0 28 +#define INSN_T 24 +#define INSN_OP1 16 + +.macro __src_b r, w0, w1; src \r, \w0, \w1; .endm +.macro __ssa8 r; ssa8b \r; .endm +.macro __ssa8r r; ssa8l \r; .endm +.macro __sh r, s; srl \r, \s; .endm +.macro __sl r, s; sll \r, \s; .endm +.macro __exth r, s; extui \r, \s, 0, 16; .endm +.macro __extl r, s; slli \r, \s, 16; .endm + +#else + +#define HWORD_START 0 +#define INSN_OP0 0 +#define INSN_T 4 +#define INSN_OP1 12 + +.macro __src_b r, w0, w1; src \r, \w1, \w0; .endm +.macro __ssa8 r; ssa8l \r; .endm +.macro __ssa8r r; ssa8b \r; .endm +.macro __sh r, s; sll \r, \s; .endm +.macro __sl r, s; srl \r, \s; .endm +.macro __exth r, s; slli \r, \s, 16; .endm +.macro __extl r, s; extui \r, \s, 0, 16; .endm + +#endif + +/* + * xxxx xxxx = imm8 field + * yyyy = imm4 field + * ssss = s field + * tttt = t field + * + * 16 0 + * ------------------- + * L32I.N yyyy ssss tttt 1000 + * S32I.N yyyy ssss tttt 1001 + * + * 23 0 + * ----------------------------- + * res 0000 0010 + * L16UI xxxx xxxx 0001 ssss tttt 0010 + * L32I xxxx xxxx 0010 ssss tttt 0010 + * XXX 0011 ssss tttt 0010 + * XXX 0100 ssss tttt 0010 + * S16I xxxx xxxx 0101 ssss tttt 0010 + * S32I xxxx xxxx 0110 ssss tttt 0010 + * XXX 0111 ssss tttt 0010 + * XXX 1000 ssss tttt 0010 + * L16SI xxxx xxxx 1001 ssss tttt 0010 + * XXX 1010 0010 + * **L32AI xxxx xxxx 1011 ssss tttt 0010 unsupported + * XXX 1100 0010 + * XXX 1101 0010 + * XXX 1110 0010 + * **S32RI xxxx xxxx 1111 ssss tttt 0010 unsupported + * ----------------------------- + * ^ ^ ^ + * sub-opcode (NIBBLE_R) -+ | | + * t field (NIBBLE_T) -----------+ | + * major opcode (NIBBLE_OP0) --------------+ + */ + +#define OP0_L32I_N 0x8 /* load immediate narrow */ +#define OP0_S32I_N 0x9 /* store immediate narrow */ +#define OP1_SI_MASK 0x4 /* OP1 bit set for stores */ +#define OP1_SI_BIT 2 /* OP1 bit number for stores */ + +#define OP1_L32I 0x2 +#define OP1_L16UI 0x1 +#define OP1_L16SI 0x9 +#define OP1_L32AI 0xb + +#define OP1_S32I 0x6 +#define OP1_S16I 0x5 +#define OP1_S32RI 0xf + +/* + * Entry condition: + * + * a0: trashed, original value saved on stack (PT_AREG0) + * a1: a1 + * a2: new stack pointer, original in DEPC + * a3: dispatch table + * depc: a2, original value saved on stack (PT_DEPC) + * excsave_1: a3 + * + * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC + * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception + */ + + +ENTRY(fast_unaligned) + + /* Note: We don't expect the address to be aligned on a word + * boundary. After all, the processor generated that exception + * and it would be a hardware fault. + */ + + /* Save some working register */ + + s32i a4, a2, PT_AREG4 + s32i a5, a2, PT_AREG5 + s32i a6, a2, PT_AREG6 + s32i a7, a2, PT_AREG7 + s32i a8, a2, PT_AREG8 + + rsr a0, DEPC + xsr a3, EXCSAVE_1 + s32i a0, a2, PT_AREG2 + s32i a3, a2, PT_AREG3 + + /* Keep value of SAR in a0 */ + + rsr a0, SAR + rsr a8, EXCVADDR # load unaligned memory address + + /* Now, identify one of the following load/store instructions. + * + * The only possible danger of a double exception on the + * following l32i instructions is kernel code in vmalloc + * memory. The processor was just executing at the EPC_1 + * address, and indeed, already fetched the instruction. That + * guarantees a TLB mapping, which hasn't been replaced by + * this unaligned exception handler that uses only static TLB + * mappings. However, high-level interrupt handlers might + * modify TLB entries, so for the generic case, we register a + * TABLE_FIXUP handler here, too. + */ + + /* a3...a6 saved on stack, a2 = SP */ + + /* Extract the instruction that caused the unaligned access. */ + + rsr a7, EPC_1 # load exception address + movi a3, ~3 + and a3, a3, a7 # mask lower bits + + l32i a4, a3, 0 # load 2 words + l32i a5, a3, 4 + + __ssa8 a7 + __src_b a4, a4, a5 # a4 has the instruction + + /* Analyze the instruction (load or store?). */ + + extui a5, a4, INSN_OP0, 4 # get insn.op0 nibble + +#if XCHAL_HAVE_NARROW + _beqi a5, OP0_L32I_N, .Lload # L32I.N, jump + addi a6, a5, -OP0_S32I_N + _beqz a6, .Lstore # S32I.N, do a store +#endif + /* 'store indicator bit' not set, jump */ + _bbci.l a4, OP1_SI_BIT + INSN_OP1, .Lload + + /* Store: Jump to table entry to get the value in the source register.*/ + +.Lstore:movi a5, .Lstore_table # table + extui a6, a4, INSN_T, 4 # get source register + addx8 a5, a6, a5 + jx a5 # jump into table + + /* Invalid instruction, CRITICAL! */ +.Linvalid_instruction_load: + j .Linvalid_instruction + + /* Load: Load memory address. */ + +.Lload: movi a3, ~3 + and a3, a3, a8 # align memory address + + __ssa8 a8 +#ifdef UNALIGNED_USER_EXCEPTION + addi a3, a3, 8 + l32e a5, a3, -8 + l32e a6, a3, -4 +#else + l32i a5, a3, 0 + l32i a6, a3, 4 +#endif + __src_b a3, a5, a6 # a3 has the data word + +#if XCHAL_HAVE_NARROW + addi a7, a7, 2 # increment PC (assume 16-bit insn) + + extui a5, a4, INSN_OP0, 4 + _beqi a5, OP0_L32I_N, 1f # l32i.n: jump + + addi a7, a7, 1 +#else + addi a7, a7, 3 +#endif + + extui a5, a4, INSN_OP1, 4 + _beqi a5, OP1_L32I, 1f # l32i: jump + + extui a3, a3, 0, 16 # extract lower 16 bits + _beqi a5, OP1_L16UI, 1f + addi a5, a5, -OP1_L16SI + _bnez a5, .Linvalid_instruction_load + + /* sign extend value */ + + slli a3, a3, 16 + srai a3, a3, 16 + + /* Set target register. */ + +1: + +#if XCHAL_HAVE_LOOP + rsr a3, LEND # check if we reached LEND + bne a7, a3, 1f + rsr a3, LCOUNT # and LCOUNT != 0 + beqz a3, 1f + addi a3, a3, -1 # decrement LCOUNT and set + rsr a7, LBEG # set PC to LBEGIN + wsr a3, LCOUNT +#endif + +1: wsr a7, EPC_1 # skip load instruction + extui a4, a4, INSN_T, 4 # extract target register + movi a5, .Lload_table + addx8 a4, a4, a5 + jx a4 # jump to entry for target register + + .align 8 +.Lload_table: + s32i a3, a2, PT_AREG0; _j .Lexit; .align 8 + mov a1, a3; _j .Lexit; .align 8 # fishy?? + s32i a3, a2, PT_AREG2; _j .Lexit; .align 8 + s32i a3, a2, PT_AREG3; _j .Lexit; .align 8 + s32i a3, a2, PT_AREG4; _j .Lexit; .align 8 + s32i a3, a2, PT_AREG5; _j .Lexit; .align 8 + s32i a3, a2, PT_AREG6; _j .Lexit; .align 8 + s32i a3, a2, PT_AREG7; _j .Lexit; .align 8 + s32i a3, a2, PT_AREG8; _j .Lexit; .align 8 + mov a9, a3 ; _j .Lexit; .align 8 + mov a10, a3 ; _j .Lexit; .align 8 + mov a11, a3 ; _j .Lexit; .align 8 + mov a12, a3 ; _j .Lexit; .align 8 + mov a13, a3 ; _j .Lexit; .align 8 + mov a14, a3 ; _j .Lexit; .align 8 + mov a15, a3 ; _j .Lexit; .align 8 + +.Lstore_table: + l32i a3, a2, PT_AREG0; _j 1f; .align 8 + mov a3, a1; _j 1f; .align 8 # fishy?? + l32i a3, a2, PT_AREG2; _j 1f; .align 8 + l32i a3, a2, PT_AREG3; _j 1f; .align 8 + l32i a3, a2, PT_AREG4; _j 1f; .align 8 + l32i a3, a2, PT_AREG5; _j 1f; .align 8 + l32i a3, a2, PT_AREG6; _j 1f; .align 8 + l32i a3, a2, PT_AREG7; _j 1f; .align 8 + l32i a3, a2, PT_AREG8; _j 1f; .align 8 + mov a3, a9 ; _j 1f; .align 8 + mov a3, a10 ; _j 1f; .align 8 + mov a3, a11 ; _j 1f; .align 8 + mov a3, a12 ; _j 1f; .align 8 + mov a3, a13 ; _j 1f; .align 8 + mov a3, a14 ; _j 1f; .align 8 + mov a3, a15 ; _j 1f; .align 8 + +1: # a7: instruction pointer, a4: instruction, a3: value + + movi a6, 0 # mask: ffffffff:00000000 + +#if XCHAL_HAVE_NARROW + addi a7, a7, 2 # incr. PC,assume 16-bit instruction + + extui a5, a4, INSN_OP0, 4 # extract OP0 + addi a5, a5, -OP0_S32I_N + _beqz a5, 1f # s32i.n: jump + + addi a7, a7, 1 # increment PC, 32-bit instruction +#else + addi a7, a7, 3 # increment PC, 32-bit instruction +#endif + + extui a5, a4, INSN_OP1, 4 # extract OP1 + _beqi a5, OP1_S32I, 1f # jump if 32 bit store + _bnei a5, OP1_S16I, .Linvalid_instruction_store + + movi a5, -1 + __extl a3, a3 # get 16-bit value + __exth a6, a5 # get 16-bit mask ffffffff:ffff0000 + + /* Get memory address */ + +1: +#if XCHAL_HAVE_LOOP + rsr a3, LEND # check if we reached LEND + bne a7, a3, 1f + rsr a3, LCOUNT # and LCOUNT != 0 + beqz a3, 1f + addi a3, a3, -1 # decrement LCOUNT and set + rsr a7, LBEG # set PC to LBEGIN + wsr a3, LCOUNT +#endif + +1: wsr a7, EPC_1 # skip store instruction + movi a4, ~3 + and a4, a4, a8 # align memory address + + /* Insert value into memory */ + + movi a5, -1 # mask: ffffffff:XXXX0000 +#ifdef UNALIGNED_USER_EXCEPTION + addi a4, a4, 8 +#endif + + __ssa8r a8 + __src_b a7, a5, a6 # lo-mask F..F0..0 (BE) 0..0F..F (LE) + __src_b a6, a6, a5 # hi-mask 0..0F..F (BE) F..F0..0 (LE) +#ifdef UNALIGNED_USER_EXCEPTION + l32e a5, a4, -8 +#else + l32i a5, a4, 0 # load lower address word +#endif + and a5, a5, a7 # mask + __sh a7, a3 # shift value + or a5, a5, a7 # or with original value +#ifdef UNALIGNED_USER_EXCEPTION + s32e a5, a4, -8 + l32e a7, a4, -4 +#else + s32i a5, a4, 0 # store + l32i a7, a4, 4 # same for upper address word +#endif + __sl a5, a3 + and a6, a7, a6 + or a6, a6, a5 +#ifdef UNALIGNED_USER_EXCEPTION + s32e a6, a4, -4 +#else + s32i a6, a4, 4 +#endif + + /* Done. restore stack and return */ + +.Lexit: + movi a4, 0 + rsr a3, EXCSAVE_1 + s32i a4, a3, EXC_TABLE_FIXUP + + /* Restore working register */ + + l32i a7, a2, PT_AREG7 + l32i a6, a2, PT_AREG6 + l32i a5, a2, PT_AREG5 + l32i a4, a2, PT_AREG4 + l32i a3, a2, PT_AREG3 + + /* restore SAR and return */ + + wsr a0, SAR + l32i a0, a2, PT_AREG0 + l32i a2, a2, PT_AREG2 + rfe + + /* We cannot handle this exception. */ + + .extern _kernel_exception +.Linvalid_instruction_store: +.Linvalid_instruction: + + /* Restore a4...a8 and SAR, set SP, and jump to default exception. */ + + l32i a8, a2, PT_AREG8 + l32i a7, a2, PT_AREG7 + l32i a6, a2, PT_AREG6 + l32i a5, a2, PT_AREG5 + l32i a4, a2, PT_AREG4 + wsr a0, SAR + mov a1, a2 + + rsr a0, PS + bbsi.l a2, PS_UM_SHIFT, 1f # jump if user mode + + movi a0, _kernel_exception + jx a0 + +1: movi a0, _user_exception + jx a0 + + +#endif /* XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION */ + diff --git a/arch/xtensa/kernel/asm-offsets.c b/arch/xtensa/kernel/asm-offsets.c new file mode 100644 index 000000000000..7cd1d7f8f608 --- /dev/null +++ b/arch/xtensa/kernel/asm-offsets.c @@ -0,0 +1,93 @@ +/* + * arch/xtensa/kernel/asm-offsets.c + * + * Generates definitions from c-type structures used by assembly sources. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + */ + +#include <asm/processor.h> + +#include <linux/types.h> +#include <linux/stddef.h> +#include <linux/thread_info.h> +#include <linux/ptrace.h> +#include <asm/ptrace.h> +#include <asm/processor.h> +#include <asm/uaccess.h> + +#define DEFINE(sym, val) asm volatile("\n->" #sym " %0 " #val : : "i" (val)) +#define BLANK() asm volatile("\n->" : : ) + +int main(void) +{ + /* struct pt_regs */ + DEFINE(PT_PC, offsetof (struct pt_regs, pc)); + DEFINE(PT_PS, offsetof (struct pt_regs, ps)); + DEFINE(PT_DEPC, offsetof (struct pt_regs, depc)); + DEFINE(PT_EXCCAUSE, offsetof (struct pt_regs, exccause)); + DEFINE(PT_EXCVADDR, offsetof (struct pt_regs, excvaddr)); + DEFINE(PT_DEBUGCAUSE, offsetof (struct pt_regs, debugcause)); + DEFINE(PT_WMASK, offsetof (struct pt_regs, wmask)); + DEFINE(PT_LBEG, offsetof (struct pt_regs, lbeg)); + DEFINE(PT_LEND, offsetof (struct pt_regs, lend)); + DEFINE(PT_LCOUNT, offsetof (struct pt_regs, lcount)); + DEFINE(PT_SAR, offsetof (struct pt_regs, sar)); + DEFINE(PT_SYSCALL, offsetof (struct pt_regs, syscall)); + DEFINE(PT_AREG, offsetof (struct pt_regs, areg[0])); + DEFINE(PT_AREG0, offsetof (struct pt_regs, areg[0])); + DEFINE(PT_AREG1, offsetof (struct pt_regs, areg[1])); + DEFINE(PT_AREG2, offsetof (struct pt_regs, areg[2])); + DEFINE(PT_AREG3, offsetof (struct pt_regs, areg[3])); + DEFINE(PT_AREG4, offsetof (struct pt_regs, areg[4])); + DEFINE(PT_AREG5, offsetof (struct pt_regs, areg[5])); + DEFINE(PT_AREG6, offsetof (struct pt_regs, areg[6])); + DEFINE(PT_AREG7, offsetof (struct pt_regs, areg[7])); + DEFINE(PT_AREG8, offsetof (struct pt_regs, areg[8])); + DEFINE(PT_AREG9, offsetof (struct pt_regs, areg[9])); + DEFINE(PT_AREG10, offsetof (struct pt_regs, areg[10])); + DEFINE(PT_AREG11, offsetof (struct pt_regs, areg[11])); + DEFINE(PT_AREG12, offsetof (struct pt_regs, areg[12])); + DEFINE(PT_AREG13, offsetof (struct pt_regs, areg[13])); + DEFINE(PT_AREG14, offsetof (struct pt_regs, areg[14])); + DEFINE(PT_AREG15, offsetof (struct pt_regs, areg[15])); + DEFINE(PT_WINDOWBASE, offsetof (struct pt_regs, windowbase)); + DEFINE(PT_WINDOWSTART, offsetof(struct pt_regs, windowstart)); + DEFINE(PT_SIZE, sizeof(struct pt_regs)); + DEFINE(PT_AREG_END, offsetof (struct pt_regs, areg[XCHAL_NUM_AREGS])); + DEFINE(PT_USER_SIZE, offsetof(struct pt_regs, areg[XCHAL_NUM_AREGS])); + BLANK(); + + /* struct task_struct */ + DEFINE(TASK_PTRACE, offsetof (struct task_struct, ptrace)); + DEFINE(TASK_MM, offsetof (struct task_struct, mm)); + DEFINE(TASK_ACTIVE_MM, offsetof (struct task_struct, active_mm)); + DEFINE(TASK_PID, offsetof (struct task_struct, pid)); + DEFINE(TASK_THREAD, offsetof (struct task_struct, thread)); + DEFINE(TASK_THREAD_INFO, offsetof (struct task_struct, thread_info)); + DEFINE(TASK_STRUCT_SIZE, sizeof (struct task_struct)); + BLANK(); + + /* struct thread_info (offset from start_struct) */ + DEFINE(THREAD_RA, offsetof (struct task_struct, thread.ra)); + DEFINE(THREAD_SP, offsetof (struct task_struct, thread.sp)); + DEFINE(THREAD_CP_SAVE, offsetof (struct task_struct, thread.cp_save)); + DEFINE(THREAD_CURRENT_DS, offsetof (struct task_struct, thread.current_ds)); + BLANK(); + + /* struct mm_struct */ + DEFINE(MM_USERS, offsetof(struct mm_struct, mm_users)); + DEFINE(MM_PGD, offsetof (struct mm_struct, pgd)); + DEFINE(MM_CONTEXT, offsetof (struct mm_struct, context)); + BLANK(); + DEFINE(PT_SINGLESTEP_BIT, PT_SINGLESTEP_BIT); + return 0; +} + + diff --git a/arch/xtensa/kernel/coprocessor.S b/arch/xtensa/kernel/coprocessor.S new file mode 100644 index 000000000000..356192a4d39d --- /dev/null +++ b/arch/xtensa/kernel/coprocessor.S @@ -0,0 +1,201 @@ +/* + * arch/xtensa/kernel/coprocessor.S + * + * Xtensa processor configuration-specific table of coprocessor and + * other custom register layout information. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 - 2005 Tensilica Inc. + * + * Marc Gauthier <marc@tensilica.com> <marc@alumni.uwaterloo.ca> + */ + +/* + * This module contains a table that describes the layout of the various + * custom registers and states associated with each coprocessor, as well + * as those not associated with any coprocessor ("extra state"). + * This table is included with core dumps and is available via the ptrace + * interface, allowing the layout of such register/state information to + * be modified in the kernel without affecting the debugger. Each + * register or state is identified using a 32-bit "libdb target number" + * assigned when the Xtensa processor is generated. + */ + +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/processor.h> + +#if XCHAL_HAVE_CP + +#define CP_LAST ((XCHAL_CP_MAX - 1) * COPROCESSOR_INFO_SIZE) + +ENTRY(release_coprocessors) + + entry a1, 16 + # a2: task + movi a3, 1 << XCHAL_CP_MAX # a3: coprocessor-bit + movi a4, coprocessor_info+CP_LAST # a4: owner-table + # a5: tmp + movi a6, 0 # a6: 0 + rsil a7, LOCKLEVEL # a7: PS + +1: /* Check if task is coprocessor owner of coprocessor[i]. */ + + l32i a5, a4, COPROCESSOR_INFO_OWNER + srli a3, a3, 1 + beqz a3, 1f + addi a4, a4, -8 + beq a2, a5, 1b + + /* Found an entry: Clear entry CPENABLE bit to disable CP. */ + + rsr a5, CPENABLE + s32i a6, a4, COPROCESSOR_INFO_OWNER + xor a5, a3, a5 + wsr a5, CPENABLE + + bnez a3, 1b + +1: wsr a7, PS + rsync + retw + + +ENTRY(disable_coprocessor) + entry sp, 16 + rsil a7, LOCKLEVEL + rsr a3, CPENABLE + movi a4, 1 + ssl a2 + sll a4, a4 + and a4, a3, a4 + xor a3, a3, a4 + wsr a3, CPENABLE + wsr a7, PS + rsync + retw + +ENTRY(enable_coprocessor) + entry sp, 16 + rsil a7, LOCKLEVEL + rsr a3, CPENABLE + movi a4, 1 + ssl a2 + sll a4, a4 + or a3, a3, a4 + wsr a3, CPENABLE + wsr a7, PS + rsync + retw + +#endif + +ENTRY(save_coprocessor_extra) + entry sp, 16 + xchal_extra_store_funcbody + retw + +ENTRY(restore_coprocessor_extra) + entry sp, 16 + xchal_extra_load_funcbody + retw + +ENTRY(save_coprocessor_registers) + entry sp, 16 + xchal_cpi_store_funcbody + retw + +ENTRY(restore_coprocessor_registers) + entry sp, 16 + xchal_cpi_load_funcbody + retw + + +/* + * The Xtensa compile-time HAL (core.h) XCHAL_*_SA_CONTENTS_LIBDB macros + * describe the contents of coprocessor & extra save areas in terms of + * undefined CONTENTS_LIBDB_{SREG,UREG,REGF} macros. We define these + * latter macros here; they expand into a table of the format we want. + * The general format is: + * + * CONTENTS_LIBDB_SREG(libdbnum, offset, size, align, rsv1, name, sregnum, + * bitmask, rsv2, rsv3) + * CONTENTS_LIBDB_UREG(libdbnum, offset, size, align, rsv1, name, uregnum, + * bitmask, rsv2, rsv3) + * CONTENTS_LIBDB_REGF(libdbnum, offset, size, align, rsv1, name, index, + * numentries, contentsize, regname_base, + * regfile_name, rsv2, rsv3) + * + * For this table, we only care about the <libdbnum>, <offset> and <size> + * fields. + */ + +/* Map all XCHAL CONTENTS macros to the reg_entry asm macro defined below: */ + +#define CONTENTS_LIBDB_SREG(libdbnum,offset,size,align,rsv1,name,sregnum, \ + bitmask, rsv2, rsv3) \ + reg_entry libdbnum, offset, size ; +#define CONTENTS_LIBDB_UREG(libdbnum,offset,size,align,rsv1,name,uregnum, \ + bitmask, rsv2, rsv3) \ + reg_entry libdbnum, offset, size ; +#define CONTENTS_LIBDB_REGF(libdbnum, offset, size, align, rsv1, name, index, \ + numentries, contentsize, regname_base, \ + regfile_name, rsv2, rsv3) \ + reg_entry libdbnum, offset, size ; + +/* A single table entry: */ + .macro reg_entry libdbnum, offset, size + .ifne (__last_offset-(__last_group_offset+\offset)) + /* padding entry */ + .word (0xFC000000+__last_offset-(__last_group_offset+\offset)) + .endif + .word \libdbnum /* actual entry */ + .set __last_offset, __last_group_offset+\offset+\size + .endm /* reg_entry */ + + +/* Table entry that marks the beginning of a group (coprocessor or "extra"): */ + .macro reg_group cpnum, num_entries, align + .set __last_group_offset, (__last_offset + \align- 1) & -\align + .ifne \num_entries + .word 0xFD000000+(\cpnum<<16)+\num_entries + .endif + .endm /* reg_group */ + +/* + * Register info tables. + */ + + .section .rodata, "a" + .globl _xtensa_reginfo_tables + .globl _xtensa_reginfo_table_size + .align 4 +_xtensa_reginfo_table_size: + .word _xtensa_reginfo_table_end - _xtensa_reginfo_tables + +_xtensa_reginfo_tables: + .set __last_offset, 0 + reg_group 0xFF, XCHAL_EXTRA_SA_CONTENTS_LIBDB_NUM, XCHAL_EXTRA_SA_ALIGN + XCHAL_EXTRA_SA_CONTENTS_LIBDB + reg_group 0, XCHAL_CP0_SA_CONTENTS_LIBDB_NUM, XCHAL_CP0_SA_ALIGN + XCHAL_CP0_SA_CONTENTS_LIBDB + reg_group 1, XCHAL_CP1_SA_CONTENTS_LIBDB_NUM, XCHAL_CP1_SA_ALIGN + XCHAL_CP1_SA_CONTENTS_LIBDB + reg_group 2, XCHAL_CP2_SA_CONTENTS_LIBDB_NUM, XCHAL_CP2_SA_ALIGN + XCHAL_CP2_SA_CONTENTS_LIBDB + reg_group 3, XCHAL_CP3_SA_CONTENTS_LIBDB_NUM, XCHAL_CP3_SA_ALIGN + XCHAL_CP3_SA_CONTENTS_LIBDB + reg_group 4, XCHAL_CP4_SA_CONTENTS_LIBDB_NUM, XCHAL_CP4_SA_ALIGN + XCHAL_CP4_SA_CONTENTS_LIBDB + reg_group 5, XCHAL_CP5_SA_CONTENTS_LIBDB_NUM, XCHAL_CP5_SA_ALIGN + XCHAL_CP5_SA_CONTENTS_LIBDB + reg_group 6, XCHAL_CP6_SA_CONTENTS_LIBDB_NUM, XCHAL_CP6_SA_ALIGN + XCHAL_CP6_SA_CONTENTS_LIBDB + reg_group 7, XCHAL_CP7_SA_CONTENTS_LIBDB_NUM, XCHAL_CP7_SA_ALIGN + XCHAL_CP7_SA_CONTENTS_LIBDB + .word 0xFC000000 /* invalid register number,marks end of table*/ +_xtensa_reginfo_table_end: + diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S new file mode 100644 index 000000000000..c64a01f71de6 --- /dev/null +++ b/arch/xtensa/kernel/entry.S @@ -0,0 +1,1996 @@ +/* + * arch/xtensa/kernel/entry.S + * + * Low-level exception handling + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004-2005 by Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + * + */ + +#include <linux/linkage.h> +#include <asm/offsets.h> +#include <asm/processor.h> +#include <asm/thread_info.h> +#include <asm/uaccess.h> +#include <asm/unistd.h> +#include <asm/ptrace.h> +#include <asm/current.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/signal.h> +#include <xtensa/coreasm.h> + +/* Unimplemented features. */ + +#undef SIGNAL_HANDLING_IN_DOUBLE_EXCEPTION +#undef KERNEL_STACK_OVERFLOW_CHECK +#undef PREEMPTIBLE_KERNEL +#undef ALLOCA_EXCEPTION_IN_IRAM + +/* Not well tested. + * + * - fast_coprocessor + */ + +/* + * Macro to find first bit set in WINDOWBASE from the left + 1 + * + * 100....0 -> 1 + * 010....0 -> 2 + * 000....1 -> WSBITS + */ + + .macro ffs_ws bit mask + +#if XCHAL_HAVE_NSA + nsau \bit, \mask # 32-WSBITS ... 31 (32 iff 0) + addi \bit, \bit, WSBITS - 32 + 1 # uppest bit set -> return 1 +#else + movi \bit, WSBITS +#if WSBITS > 16 + _bltui \mask, 0x10000, 99f + addi \bit, \bit, -16 + extui \mask, \mask, 16, 16 +#endif +#if WSBITS > 8 +99: _bltui \mask, 0x100, 99f + addi \bit, \bit, -8 + srli \mask, \mask, 8 +#endif +99: _bltui \mask, 0x10, 99f + addi \bit, \bit, -4 + srli \mask, \mask, 4 +99: _bltui \mask, 0x4, 99f + addi \bit, \bit, -2 + srli \mask, \mask, 2 +99: _bltui \mask, 0x2, 99f + addi \bit, \bit, -1 +99: + +#endif + .endm + +/* ----------------- DEFAULT FIRST LEVEL EXCEPTION HANDLERS ----------------- */ + +/* + * First-level exception handler for user exceptions. + * Save some special registers, extra states and all registers in the AR + * register file that were in use in the user task, and jump to the common + * exception code. + * We save SAR (used to calculate WMASK), and WB and WS (we don't have to + * save them for kernel exceptions). + * + * Entry condition for user_exception: + * + * a0: trashed, original value saved on stack (PT_AREG0) + * a1: a1 + * a2: new stack pointer, original value in depc + * a3: dispatch table + * depc: a2, original value saved on stack (PT_DEPC) + * excsave1: a3 + * + * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC + * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception + * + * Entry condition for _user_exception: + * + * a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC + * excsave has been restored, and + * stack pointer (a1) has been set. + * + * Note: _user_exception might be at an odd adress. Don't use call0..call12 + */ + +ENTRY(user_exception) + + /* Save a2, a3, and depc, restore excsave_1 and set SP. */ + + xsr a3, EXCSAVE_1 + rsr a0, DEPC + s32i a1, a2, PT_AREG1 + s32i a0, a2, PT_AREG2 + s32i a3, a2, PT_AREG3 + mov a1, a2 + + .globl _user_exception +_user_exception: + + /* Save SAR and turn off single stepping */ + + movi a2, 0 + rsr a3, SAR + wsr a2, ICOUNTLEVEL + s32i a3, a1, PT_SAR + + /* Rotate ws so that the current windowbase is at bit0. */ + /* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */ + + rsr a2, WINDOWBASE + rsr a3, WINDOWSTART + ssr a2 + s32i a2, a1, PT_WINDOWBASE + s32i a3, a1, PT_WINDOWSTART + slli a2, a3, 32-WSBITS + src a2, a3, a2 + srli a2, a2, 32-WSBITS + s32i a2, a1, PT_WMASK # needed for restoring registers + + /* Save only live registers. */ + + _bbsi.l a2, 1, 1f + s32i a4, a1, PT_AREG4 + s32i a5, a1, PT_AREG5 + s32i a6, a1, PT_AREG6 + s32i a7, a1, PT_AREG7 + _bbsi.l a2, 2, 1f + s32i a8, a1, PT_AREG8 + s32i a9, a1, PT_AREG9 + s32i a10, a1, PT_AREG10 + s32i a11, a1, PT_AREG11 + _bbsi.l a2, 3, 1f + s32i a12, a1, PT_AREG12 + s32i a13, a1, PT_AREG13 + s32i a14, a1, PT_AREG14 + s32i a15, a1, PT_AREG15 + _bnei a2, 1, 1f # only one valid frame? + + /* Only one valid frame, skip saving regs. */ + + j 2f + + /* Save the remaining registers. + * We have to save all registers up to the first '1' from + * the right, except the current frame (bit 0). + * Assume a2 is: 001001000110001 + * All regiser frames starting from the top fiel to the marked '1' + * must be saved. + */ + +1: addi a3, a2, -1 # eliminate '1' in bit 0: yyyyxxww0 + neg a3, a3 # yyyyxxww0 -> YYYYXXWW1+1 + and a3, a3, a2 # max. only one bit is set + + /* Find number of frames to save */ + + ffs_ws a0, a3 # number of frames to the '1' from left + + /* Store information into WMASK: + * bits 0..3: xxx1 masked lower 4 bits of the rotated windowstart, + * bits 4...: number of valid 4-register frames + */ + + slli a3, a0, 4 # number of frames to save in bits 8..4 + extui a2, a2, 0, 4 # mask for the first 16 registers + or a2, a3, a2 + s32i a2, a1, PT_WMASK # needed when we restore the reg-file + + /* Save 4 registers at a time */ + +1: rotw -1 + s32i a0, a5, PT_AREG_END - 16 + s32i a1, a5, PT_AREG_END - 12 + s32i a2, a5, PT_AREG_END - 8 + s32i a3, a5, PT_AREG_END - 4 + addi a0, a4, -1 + addi a1, a5, -16 + _bnez a0, 1b + + /* WINDOWBASE still in SAR! */ + + rsr a2, SAR # original WINDOWBASE + movi a3, 1 + ssl a2 + sll a3, a3 + wsr a3, WINDOWSTART # set corresponding WINDOWSTART bit + wsr a2, WINDOWBASE # and WINDOWSTART + rsync + + /* We are back to the original stack pointer (a1) */ + +2: +#if XCHAL_EXTRA_SA_SIZE + + /* For user exceptions, save the extra state into the user's TCB. + * Note: We must assume that xchal_extra_store_funcbody destroys a2..a15 + */ + + GET_CURRENT(a2,a1) + addi a2, a2, THREAD_CP_SAVE + xchal_extra_store_funcbody +#endif + + /* Now, jump to the common exception handler. */ + + j common_exception + + +/* + * First-level exit handler for kernel exceptions + * Save special registers and the live window frame. + * Note: Even though we changes the stack pointer, we don't have to do a + * MOVSP here, as we do that when we return from the exception. + * (See comment in the kernel exception exit code) + * + * Entry condition for kernel_exception: + * + * a0: trashed, original value saved on stack (PT_AREG0) + * a1: a1 + * a2: new stack pointer, original in DEPC + * a3: dispatch table + * depc: a2, original value saved on stack (PT_DEPC) + * excsave_1: a3 + * + * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC + * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception + * + * Entry condition for _kernel_exception: + * + * a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC + * excsave has been restored, and + * stack pointer (a1) has been set. + * + * Note: _kernel_exception might be at an odd adress. Don't use call0..call12 + */ + +ENTRY(kernel_exception) + + /* Save a0, a2, a3, DEPC and set SP. */ + + xsr a3, EXCSAVE_1 # restore a3, excsave_1 + rsr a0, DEPC # get a2 + s32i a1, a2, PT_AREG1 + s32i a0, a2, PT_AREG2 + s32i a3, a2, PT_AREG3 + mov a1, a2 + + .globl _kernel_exception +_kernel_exception: + + /* Save SAR and turn off single stepping */ + + movi a2, 0 + rsr a3, SAR + wsr a2, ICOUNTLEVEL + s32i a3, a1, PT_SAR + + /* Rotate ws so that the current windowbase is at bit0. */ + /* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */ + + rsr a2, WINDOWBASE # don't need to save these, we only + rsr a3, WINDOWSTART # need shifted windowstart: windowmask + ssr a2 + slli a2, a3, 32-WSBITS + src a2, a3, a2 + srli a2, a2, 32-WSBITS + s32i a2, a1, PT_WMASK # needed for kernel_exception_exit + + /* Save only the live window-frame */ + + _bbsi.l a2, 1, 1f + s32i a4, a1, PT_AREG4 + s32i a5, a1, PT_AREG5 + s32i a6, a1, PT_AREG6 + s32i a7, a1, PT_AREG7 + _bbsi.l a2, 2, 1f + s32i a8, a1, PT_AREG8 + s32i a9, a1, PT_AREG9 + s32i a10, a1, PT_AREG10 + s32i a11, a1, PT_AREG11 + _bbsi.l a2, 3, 1f + s32i a12, a1, PT_AREG12 + s32i a13, a1, PT_AREG13 + s32i a14, a1, PT_AREG14 + s32i a15, a1, PT_AREG15 + +1: + +#ifdef KERNEL_STACK_OVERFLOW_CHECK + + /* Stack overflow check, for debugging */ + extui a2, a1, TASK_SIZE_BITS,XX + movi a3, SIZE?? + _bge a2, a3, out_of_stack_panic + +#endif + +/* + * This is the common exception handler. + * We get here from the user exception handler or simply by falling through + * from the kernel exception handler. + * Save the remaining special registers, switch to kernel mode, and jump + * to the second-level exception handler. + * + */ + +common_exception: + + /* Save EXCVADDR, DEBUGCAUSE, and PC, and clear LCOUNT */ + + rsr a2, DEBUGCAUSE + rsr a3, EPC_1 + s32i a2, a1, PT_DEBUGCAUSE + s32i a3, a1, PT_PC + + rsr a3, EXCVADDR + movi a2, 0 + s32i a3, a1, PT_EXCVADDR + xsr a2, LCOUNT + s32i a2, a1, PT_LCOUNT + + /* It is now save to restore the EXC_TABLE_FIXUP variable. */ + + rsr a0, EXCCAUSE + movi a3, 0 + rsr a2, EXCSAVE_1 + s32i a0, a1, PT_EXCCAUSE + s32i a3, a2, EXC_TABLE_FIXUP + + /* All unrecoverable states are saved on stack, now, and a1 is valid, + * so we can allow exceptions and interrupts (*) again. + * Set PS(EXCM = 0, UM = 0, RING = 0, OWB = 0, WOE = 1, INTLEVEL = X) + * + * (*) We only allow interrupts if PS.INTLEVEL was not set to 1 before + * (interrupts disabled) and if this exception is not an interrupt. + */ + + rsr a3, PS + addi a0, a0, -4 + movi a2, 1 + extui a3, a3, 0, 1 # a3 = PS.INTLEVEL[0] + moveqz a3, a2, a0 # a3 = 1 iff interrupt exception + movi a2, PS_WOE_MASK + or a3, a3, a2 + rsr a0, EXCCAUSE + xsr a3, PS + + s32i a3, a1, PT_PS # save ps + + /* Save LBEG, LEND */ + + rsr a2, LBEG + rsr a3, LEND + s32i a2, a1, PT_LBEG + s32i a3, a1, PT_LEND + + /* Go to second-level dispatcher. Set up parameters to pass to the + * exception handler and call the exception handler. + */ + + movi a4, exc_table + mov a6, a1 # pass stack frame + mov a7, a0 # pass EXCCAUSE + addx4 a4, a0, a4 + l32i a4, a4, EXC_TABLE_DEFAULT # load handler + + /* Call the second-level handler */ + + callx4 a4 + + /* Jump here for exception exit */ + +common_exception_return: + + /* Jump if we are returning from kernel exceptions. */ + +1: l32i a3, a1, PT_PS + _bbsi.l a3, PS_UM_SHIFT, 2f + j kernel_exception_exit + + /* Specific to a user exception exit: + * We need to check some flags for signal handling and rescheduling, + * and have to restore WB and WS, extra states, and all registers + * in the register file that were in use in the user task. + */ + +2: wsr a3, PS /* disable interrupts */ + + /* Check for signals (keep interrupts disabled while we read TI_FLAGS) + * Note: PS.INTLEVEL = 0, PS.EXCM = 1 + */ + + GET_THREAD_INFO(a2,a1) + l32i a4, a2, TI_FLAGS + + /* Enable interrupts again. + * Note: When we get here, we certainly have handled any interrupts. + * (Hint: There is only one user exception frame on stack) + */ + + movi a3, PS_WOE_MASK + + _bbsi.l a4, TIF_NEED_RESCHED, 3f + _bbci.l a4, TIF_SIGPENDING, 4f + +#ifndef SIGNAL_HANDLING_IN_DOUBLE_EXCEPTION + l32i a4, a1, PT_DEPC + bgeui a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 4f +#endif + + /* Reenable interrupts and call do_signal() */ + + wsr a3, PS + movi a4, do_signal # int do_signal(struct pt_regs*, sigset_t*) + mov a6, a1 + movi a7, 0 + callx4 a4 + j 1b + +3: /* Reenable interrupts and reschedule */ + + wsr a3, PS + movi a4, schedule # void schedule (void) + callx4 a4 + j 1b + + /* Restore the state of the task and return from the exception. */ + + + /* If we are returning from a user exception, and the process + * to run next has PT_SINGLESTEP set, we want to setup + * ICOUNT and ICOUNTLEVEL to step one instruction. + * PT_SINGLESTEP is set by sys_ptrace (ptrace.c) + */ + +4: /* a2 holds GET_CURRENT(a2,a1) */ + + l32i a3, a2, TI_TASK + l32i a3, a3, TASK_PTRACE + bbci.l a3, PT_SINGLESTEP_BIT, 1f # jump if single-step flag is not set + + movi a3, -2 # PT_SINGLESTEP flag is set, + movi a4, 1 # icountlevel of 1 means it won't + wsr a3, ICOUNT # start counting until after rfe + wsr a4, ICOUNTLEVEL # so setup icount & icountlevel. + isync + +1: + +#if XCHAL_EXTRA_SA_SIZE + + /* For user exceptions, restore the extra state from the user's TCB. */ + + /* Note: a2 still contains GET_CURRENT(a2,a1) */ + addi a2, a2, THREAD_CP_SAVE + xchal_extra_load_funcbody + + /* We must assume that xchal_extra_store_funcbody destroys + * registers a2..a15. FIXME, this list can eventually be + * reduced once real register requirements of the macro are + * finalized. */ + +#endif /* XCHAL_EXTRA_SA_SIZE */ + + + /* Switch to the user thread WINDOWBASE. Save SP temporarily in DEPC */ + + l32i a2, a1, PT_WINDOWBASE + l32i a3, a1, PT_WINDOWSTART + wsr a1, DEPC # use DEPC as temp storage + wsr a3, WINDOWSTART # restore WINDOWSTART + ssr a2 # preserve user's WB in the SAR + wsr a2, WINDOWBASE # switch to user's saved WB + rsync + rsr a1, DEPC # restore stack pointer + l32i a2, a1, PT_WMASK # register frames saved (in bits 4...9) + rotw -1 # we restore a4..a7 + _bltui a6, 16, 1f # only have to restore current window? + + /* The working registers are a0 and a3. We are restoring to + * a4..a7. Be careful not to destroy what we have just restored. + * Note: wmask has the format YYYYM: + * Y: number of registers saved in groups of 4 + * M: 4 bit mask of first 16 registers + */ + + mov a2, a6 + mov a3, a5 + +2: rotw -1 # a0..a3 become a4..a7 + addi a3, a7, -4*4 # next iteration + addi a2, a6, -16 # decrementing Y in WMASK + l32i a4, a3, PT_AREG_END + 0 + l32i a5, a3, PT_AREG_END + 4 + l32i a6, a3, PT_AREG_END + 8 + l32i a7, a3, PT_AREG_END + 12 + _bgeui a2, 16, 2b + + /* Clear unrestored registers (don't leak anything to user-land */ + +1: rsr a0, WINDOWBASE + rsr a3, SAR + sub a3, a0, a3 + beqz a3, 2f + extui a3, a3, 0, WBBITS + +1: rotw -1 + addi a3, a7, -1 + movi a4, 0 + movi a5, 0 + movi a6, 0 + movi a7, 0 + bgei a3, 1, 1b + + /* We are back were we were when we started. + * Note: a2 still contains WMASK (if we've returned to the original + * frame where we had loaded a2), or at least the lower 4 bits + * (if we have restored WSBITS-1 frames). + */ + +2: j common_exception_exit + + /* This is the kernel exception exit. + * We avoided to do a MOVSP when we entered the exception, but we + * have to do it here. + */ + +kernel_exception_exit: + + /* Disable interrupts (a3 holds PT_PS) */ + + wsr a3, PS + +#ifdef PREEMPTIBLE_KERNEL + +#ifdef CONFIG_PREEMPT + + /* + * Note: We've just returned from a call4, so we have + * at least 4 addt'l regs. + */ + + /* Check current_thread_info->preempt_count */ + + GET_THREAD_INFO(a2) + l32i a3, a2, TI_PREEMPT + bnez a3, 1f + + l32i a2, a2, TI_FLAGS + +1: + +#endif + +#endif + + /* Check if we have to do a movsp. + * + * We only have to do a movsp if the previous window-frame has + * been spilled to the *temporary* exception stack instead of the + * task's stack. This is the case if the corresponding bit in + * WINDOWSTART for the previous window-frame was set before + * (not spilled) but is zero now (spilled). + * If this bit is zero, all other bits except the one for the + * current window frame are also zero. So, we can use a simple test: + * 'and' WINDOWSTART and WINDOWSTART-1: + * + * (XXXXXX1[0]* - 1) AND XXXXXX1[0]* = XXXXXX0[0]* + * + * The result is zero only if one bit was set. + * + * (Note: We might have gone through several task switches before + * we come back to the current task, so WINDOWBASE might be + * different from the time the exception occurred.) + */ + + /* Test WINDOWSTART before and after the exception. + * We actually have WMASK, so we only have to test if it is 1 or not. + */ + + l32i a2, a1, PT_WMASK + _beqi a2, 1, common_exception_exit # Spilled before exception,jump + + /* Test WINDOWSTART now. If spilled, do the movsp */ + + rsr a3, WINDOWSTART + addi a0, a3, -1 + and a3, a3, a0 + _bnez a3, common_exception_exit + + /* Do a movsp (we returned from a call4, so we have at least a0..a7) */ + + addi a0, a1, -16 + l32i a3, a0, 0 + l32i a4, a0, 4 + s32i a3, a1, PT_SIZE+0 + s32i a4, a1, PT_SIZE+4 + l32i a3, a0, 8 + l32i a4, a0, 12 + s32i a3, a1, PT_SIZE+8 + s32i a4, a1, PT_SIZE+12 + + /* Common exception exit. + * We restore the special register and the current window frame, and + * return from the exception. + * + * Note: We expect a2 to hold PT_WMASK + */ + +common_exception_exit: + + _bbsi.l a2, 1, 1f + l32i a4, a1, PT_AREG4 + l32i a5, a1, PT_AREG5 + l32i a6, a1, PT_AREG6 + l32i a7, a1, PT_AREG7 + _bbsi.l a2, 2, 1f + l32i a8, a1, PT_AREG8 + l32i a9, a1, PT_AREG9 + l32i a10, a1, PT_AREG10 + l32i a11, a1, PT_AREG11 + _bbsi.l a2, 3, 1f + l32i a12, a1, PT_AREG12 + l32i a13, a1, PT_AREG13 + l32i a14, a1, PT_AREG14 + l32i a15, a1, PT_AREG15 + + /* Restore PC, SAR */ + +1: l32i a2, a1, PT_PC + l32i a3, a1, PT_SAR + wsr a2, EPC_1 + wsr a3, SAR + + /* Restore LBEG, LEND, LCOUNT */ + + l32i a2, a1, PT_LBEG + l32i a3, a1, PT_LEND + wsr a2, LBEG + l32i a2, a1, PT_LCOUNT + wsr a3, LEND + wsr a2, LCOUNT + + /* Check if it was double exception. */ + + l32i a0, a1, PT_DEPC + l32i a3, a1, PT_AREG3 + l32i a2, a1, PT_AREG2 + _bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f + + /* Restore a0...a3 and return */ + + l32i a0, a1, PT_AREG0 + l32i a1, a1, PT_AREG1 + rfe + +1: wsr a0, DEPC + l32i a0, a1, PT_AREG0 + l32i a1, a1, PT_AREG1 + rfde + +/* + * Debug exception handler. + * + * Currently, we don't support KGDB, so only user application can be debugged. + * + * When we get here, a0 is trashed and saved to excsave[debuglevel] + */ + +ENTRY(debug_exception) + + rsr a0, EPS + XCHAL_DEBUGLEVEL + bbsi.l a0, PS_EXCM_SHIFT, 1f # exception mode + + /* Set EPC_1 and EXCCAUSE */ + + wsr a2, DEPC # save a2 temporarily + rsr a2, EPC + XCHAL_DEBUGLEVEL + wsr a2, EPC_1 + + movi a2, EXCCAUSE_MAPPED_DEBUG + wsr a2, EXCCAUSE + + /* Restore PS to the value before the debug exc but with PS.EXCM set.*/ + + movi a2, 1 << PS_EXCM_SHIFT + or a2, a0, a2 + movi a0, debug_exception # restore a3, debug jump vector + wsr a2, PS + xsr a0, EXCSAVE + XCHAL_DEBUGLEVEL + + /* Switch to kernel/user stack, restore jump vector, and save a0 */ + + bbsi.l a2, PS_UM_SHIFT, 2f # jump if user mode + + addi a2, a1, -16-PT_SIZE # assume kernel stack + s32i a0, a2, PT_AREG0 + movi a0, 0 + s32i a1, a2, PT_AREG1 + s32i a0, a2, PT_DEPC # mark it as a regular exception + xsr a0, DEPC + s32i a3, a2, PT_AREG3 + s32i a0, a2, PT_AREG2 + mov a1, a2 + j _kernel_exception + +2: rsr a2, EXCSAVE_1 + l32i a2, a2, EXC_TABLE_KSTK # load kernel stack pointer + s32i a0, a2, PT_AREG0 + movi a0, 0 + s32i a1, a2, PT_AREG1 + s32i a0, a2, PT_DEPC + xsr a0, DEPC + s32i a3, a2, PT_AREG3 + s32i a0, a2, PT_AREG2 + mov a1, a2 + j _user_exception + + /* Debug exception while in exception mode. */ +1: j 1b // FIXME!! + + +/* + * We get here in case of an unrecoverable exception. + * The only thing we can do is to be nice and print a panic message. + * We only produce a single stack frame for panic, so ??? + * + * + * Entry conditions: + * + * - a0 contains the caller address; original value saved in excsave1. + * - the original a0 contains a valid return address (backtrace) or 0. + * - a2 contains a valid stackpointer + * + * Notes: + * + * - If the stack pointer could be invalid, the caller has to setup a + * dummy stack pointer (e.g. the stack of the init_task) + * + * - If the return address could be invalid, the caller has to set it + * to 0, so the backtrace would stop. + * + */ + .align 4 +unrecoverable_text: + .ascii "Unrecoverable error in exception handler\0" + +ENTRY(unrecoverable_exception) + + movi a0, 1 + movi a1, 0 + + wsr a0, WINDOWSTART + wsr a1, WINDOWBASE + rsync + + movi a1, PS_WOE_MASK | 1 + wsr a1, PS + rsync + + movi a1, init_task + movi a0, 0 + addi a1, a1, PT_REGS_OFFSET + + movi a4, panic + movi a6, unrecoverable_text + + callx4 a4 + +1: j 1b + + +/* -------------------------- FAST EXCEPTION HANDLERS ----------------------- */ + +/* + * Fast-handler for alloca exceptions + * + * The ALLOCA handler is entered when user code executes the MOVSP + * instruction and the caller's frame is not in the register file. + * In this case, the caller frame's a0..a3 are on the stack just + * below sp (a1), and this handler moves them. + * + * For "MOVSP <ar>,<as>" without destination register a1, this routine + * simply moves the value from <as> to <ar> without moving the save area. + * + * Entry condition: + * + * a0: trashed, original value saved on stack (PT_AREG0) + * a1: a1 + * a2: new stack pointer, original in DEPC + * a3: dispatch table + * depc: a2, original value saved on stack (PT_DEPC) + * excsave_1: a3 + * + * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC + * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception + */ + +#if XCHAL_HAVE_BE +#define _EXTUI_MOVSP_SRC(ar) extui ar, ar, 4, 4 +#define _EXTUI_MOVSP_DST(ar) extui ar, ar, 0, 4 +#else +#define _EXTUI_MOVSP_SRC(ar) extui ar, ar, 0, 4 +#define _EXTUI_MOVSP_DST(ar) extui ar, ar, 4, 4 +#endif + +ENTRY(fast_alloca) + + /* We shouldn't be in a double exception. */ + + l32i a0, a2, PT_DEPC + _bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lunhandled_double + + rsr a0, DEPC # get a2 + s32i a4, a2, PT_AREG4 # save a4 and + s32i a0, a2, PT_AREG2 # a2 to stack + + /* Exit critical section. */ + + movi a0, 0 + s32i a0, a3, EXC_TABLE_FIXUP + + /* Restore a3, excsave_1 */ + + xsr a3, EXCSAVE_1 # make sure excsave_1 is valid for dbl. + rsr a4, EPC_1 # get exception address + s32i a3, a2, PT_AREG3 # save a3 to stack + +#ifdef ALLOCA_EXCEPTION_IN_IRAM +#error iram not supported +#else + /* Note: l8ui not allowed in IRAM/IROM!! */ + l8ui a0, a4, 1 # read as(src) from MOVSP instruction +#endif + movi a3, .Lmovsp_src + _EXTUI_MOVSP_SRC(a0) # extract source register number + addx8 a3, a0, a3 + jx a3 + +.Lunhandled_double: + wsr a0, EXCSAVE_1 + movi a0, unrecoverable_exception + callx0 a0 + + .align 8 +.Lmovsp_src: + l32i a3, a2, PT_AREG0; _j 1f; .align 8 + mov a3, a1; _j 1f; .align 8 + l32i a3, a2, PT_AREG2; _j 1f; .align 8 + l32i a3, a2, PT_AREG3; _j 1f; .align 8 + l32i a3, a2, PT_AREG4; _j 1f; .align 8 + mov a3, a5; _j 1f; .align 8 + mov a3, a6; _j 1f; .align 8 + mov a3, a7; _j 1f; .align 8 + mov a3, a8; _j 1f; .align 8 + mov a3, a9; _j 1f; .align 8 + mov a3, a10; _j 1f; .align 8 + mov a3, a11; _j 1f; .align 8 + mov a3, a12; _j 1f; .align 8 + mov a3, a13; _j 1f; .align 8 + mov a3, a14; _j 1f; .align 8 + mov a3, a15; _j 1f; .align 8 + +1: + +#ifdef ALLOCA_EXCEPTION_IN_IRAM +#error iram not supported +#else + l8ui a0, a4, 0 # read ar(dst) from MOVSP instruction +#endif + addi a4, a4, 3 # step over movsp + _EXTUI_MOVSP_DST(a0) # extract destination register + wsr a4, EPC_1 # save new epc_1 + + _bnei a0, 1, 1f # no 'movsp a1, ax': jump + + /* Move the save area. This implies the use of the L32E + * and S32E instructions, because this move must be done with + * the user's PS.RING privilege levels, not with ring 0 + * (kernel's) privileges currently active with PS.EXCM + * set. Note that we have stil registered a fixup routine with the + * double exception vector in case a double exception occurs. + */ + + /* a0,a4:avail a1:old user stack a2:exc. stack a3:new user stack. */ + + l32e a0, a1, -16 + l32e a4, a1, -12 + s32e a0, a3, -16 + s32e a4, a3, -12 + l32e a0, a1, -8 + l32e a4, a1, -4 + s32e a0, a3, -8 + s32e a4, a3, -4 + + /* Restore stack-pointer and all the other saved registers. */ + + mov a1, a3 + + l32i a4, a2, PT_AREG4 + l32i a3, a2, PT_AREG3 + l32i a0, a2, PT_AREG0 + l32i a2, a2, PT_AREG2 + rfe + + /* MOVSP <at>,<as> was invoked with <at> != a1. + * Because the stack pointer is not being modified, + * we should be able to just modify the pointer + * without moving any save area. + * The processor only traps these occurrences if the + * caller window isn't live, so unfortunately we can't + * use this as an alternate trap mechanism. + * So we just do the move. This requires that we + * resolve the destination register, not just the source, + * so there's some extra work. + * (PERHAPS NOT REALLY NEEDED, BUT CLEANER...) + */ + + /* a0 dst-reg, a1 user-stack, a2 stack, a3 value of src reg. */ + +1: movi a4, .Lmovsp_dst + addx8 a4, a0, a4 + jx a4 + + .align 8 +.Lmovsp_dst: + s32i a3, a2, PT_AREG0; _j 1f; .align 8 + mov a1, a3; _j 1f; .align 8 + s32i a3, a2, PT_AREG2; _j 1f; .align 8 + s32i a3, a2, PT_AREG3; _j 1f; .align 8 + s32i a3, a2, PT_AREG4; _j 1f; .align 8 + mov a5, a3; _j 1f; .align 8 + mov a6, a3; _j 1f; .align 8 + mov a7, a3; _j 1f; .align 8 + mov a8, a3; _j 1f; .align 8 + mov a9, a3; _j 1f; .align 8 + mov a10, a3; _j 1f; .align 8 + mov a11, a3; _j 1f; .align 8 + mov a12, a3; _j 1f; .align 8 + mov a13, a3; _j 1f; .align 8 + mov a14, a3; _j 1f; .align 8 + mov a15, a3; _j 1f; .align 8 + +1: l32i a4, a2, PT_AREG4 + l32i a3, a2, PT_AREG3 + l32i a0, a2, PT_AREG0 + l32i a2, a2, PT_AREG2 + rfe + + +/* + * fast system calls. + * + * WARNING: The kernel doesn't save the entire user context before + * handling a fast system call. These functions are small and short, + * usually offering some functionality not available to user tasks. + * + * BE CAREFUL TO PRESERVE THE USER'S CONTEXT. + * + * Entry condition: + * + * a0: trashed, original value saved on stack (PT_AREG0) + * a1: a1 + * a2: new stack pointer, original in DEPC + * a3: dispatch table + * depc: a2, original value saved on stack (PT_DEPC) + * excsave_1: a3 + */ + +ENTRY(fast_syscall_kernel) + + /* Skip syscall. */ + + rsr a0, EPC_1 + addi a0, a0, 3 + wsr a0, EPC_1 + + l32i a0, a2, PT_DEPC + bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_syscall_unrecoverable + + rsr a0, DEPC # get syscall-nr + _beqz a0, fast_syscall_spill_registers + + addi a0, a0, -__NR_sysxtensa + _beqz a0, fast_syscall_sysxtensa + + j kernel_exception + + +ENTRY(fast_syscall_user) + + /* Skip syscall. */ + + rsr a0, EPC_1 + addi a0, a0, 3 + wsr a0, EPC_1 + + l32i a0, a2, PT_DEPC + bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_syscall_unrecoverable + + rsr a0, DEPC # get syscall-nr + _beqz a0, fast_syscall_spill_registers + + addi a0, a0, -__NR_sysxtensa + _beqz a0, fast_syscall_sysxtensa + + j user_exception + +ENTRY(fast_syscall_unrecoverable) + + /* Restore all states. */ + + l32i a0, a2, PT_AREG0 # restore a0 + xsr a2, DEPC # restore a2, depc + rsr a3, EXCSAVE_1 + + wsr a0, EXCSAVE_1 + movi a0, unrecoverable_exception + callx0 a0 + + + +/* + * sysxtensa syscall handler + * + * int sysxtensa (XTENSA_ATOMIC_SET, ptr, val, unused); + * int sysxtensa (XTENSA_ATOMIC_ADD, ptr, val, unused); + * int sysxtensa (XTENSA_ATOMIC_EXG_ADD, ptr, val, unused); + * int sysxtensa (XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval); + * a2 a6 a3 a4 a5 + * + * Entry condition: + * + * a0: trashed, original value saved on stack (PT_AREG0) + * a1: a1 + * a2: new stack pointer, original in DEPC + * a3: dispatch table + * depc: a2, original value saved on stack (PT_DEPC) + * excsave_1: a3 + * + * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC + * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception + * + * Note: we don't have to save a2; a2 holds the return value + * + * We use the two macros TRY and CATCH: + * + * TRY adds an entry to the __ex_table fixup table for the immediately + * following instruction. + * + * CATCH catches any exception that occurred at one of the preceeding TRY + * statements and continues from there + * + * Usage TRY l32i a0, a1, 0 + * <other code> + * done: rfe + * CATCH <set return code> + * j done + */ + +#define TRY \ + .section __ex_table, "a"; \ + .word 66f, 67f; \ + .text; \ +66: + +#define CATCH \ +67: + +ENTRY(fast_syscall_sysxtensa) + + _beqz a6, 1f + _blti a6, SYSXTENSA_COUNT, 2f + +1: j user_exception + +2: xsr a3, EXCSAVE_1 # restore a3, excsave1 + s32i a7, a2, PT_AREG7 + + movi a7, 4 # sizeof(unsigned int) + verify_area a3, a7, a0, a2, .Leac + + _beqi a6, SYSXTENSA_ATOMIC_SET, .Lset + _beqi a6, SYSXTENSA_ATOMIC_EXG_ADD, .Lexg + _beqi a6, SYSXTENSA_ATOMIC_ADD, .Ladd + + /* Fall through for SYSXTENSA_ATOMIC_CMP_SWP */ + +.Lswp: /* Atomic compare and swap */ + +TRY l32i a7, a3, 0 # read old value + bne a7, a4, 1f # same as old value? jump + s32i a5, a3, 0 # different, modify value + movi a7, 1 # and return 1 + j .Lret + +1: movi a7, 0 # same values: return 0 + j .Lret + +.Ladd: /* Atomic add */ +.Lexg: /* Atomic (exchange) add */ + +TRY l32i a7, a3, 0 + add a4, a4, a7 + s32i a4, a3, 0 + j .Lret + +.Lset: /* Atomic set */ + +TRY l32i a7, a3, 0 # read old value as return value + s32i a4, a3, 0 # write new value + +.Lret: mov a0, a2 + mov a2, a7 + l32i a7, a0, PT_AREG7 + l32i a3, a0, PT_AREG3 + l32i a0, a0, PT_AREG0 + rfe + +CATCH +.Leac: movi a7, -EFAULT + j .Lret + + + +/* fast_syscall_spill_registers. + * + * Entry condition: + * + * a0: trashed, original value saved on stack (PT_AREG0) + * a1: a1 + * a2: new stack pointer, original in DEPC + * a3: dispatch table + * depc: a2, original value saved on stack (PT_DEPC) + * excsave_1: a3 + * + * Note: We assume the stack pointer is EXC_TABLE_KSTK in the fixup handler. + * Note: We don't need to save a2 in depc (return value) + */ + +ENTRY(fast_syscall_spill_registers) + + /* Register a FIXUP handler (pass current wb as a parameter) */ + + movi a0, fast_syscall_spill_registers_fixup + s32i a0, a3, EXC_TABLE_FIXUP + rsr a0, WINDOWBASE + s32i a0, a3, EXC_TABLE_PARAM + + /* Save a3 and SAR on stack. */ + + rsr a0, SAR + xsr a3, EXCSAVE_1 # restore a3 and excsave_1 + s32i a0, a2, PT_AREG4 # store SAR to PT_AREG4 + s32i a3, a2, PT_AREG3 + + /* The spill routine might clobber a7, a11, and a15. */ + + s32i a7, a2, PT_AREG5 + s32i a11, a2, PT_AREG6 + s32i a15, a2, PT_AREG7 + + call0 _spill_registers # destroys a3, DEPC, and SAR + + /* Advance PC, restore registers and SAR, and return from exception. */ + + l32i a3, a2, PT_AREG4 + l32i a0, a2, PT_AREG0 + wsr a3, SAR + l32i a3, a2, PT_AREG3 + + /* Restore clobbered registers. */ + + l32i a7, a2, PT_AREG5 + l32i a11, a2, PT_AREG6 + l32i a15, a2, PT_AREG7 + + movi a2, 0 + rfe + +/* Fixup handler. + * + * We get here if the spill routine causes an exception, e.g. tlb miss. + * We basically restore WINDOWBASE and WINDOWSTART to the condition when + * we entered the spill routine and jump to the user exception handler. + * + * a0: value of depc, original value in depc + * a2: trashed, original value in EXC_TABLE_DOUBLE_SAVE + * a3: exctable, original value in excsave1 + */ + +fast_syscall_spill_registers_fixup: + + rsr a2, WINDOWBASE # get current windowbase (a2 is saved) + xsr a0, DEPC # restore depc and a0 + ssl a2 # set shift (32 - WB) + + /* We need to make sure the current registers (a0-a3) are preserved. + * To do this, we simply set the bit for the current window frame + * in WS, so that the exception handlers save them to the task stack. + */ + + rsr a3, EXCSAVE_1 # get spill-mask + slli a2, a3, 1 # shift left by one + + slli a3, a2, 32-WSBITS + src a2, a2, a3 # a1 = xxwww1yyxxxwww1yy...... + wsr a2, WINDOWSTART # set corrected windowstart + + movi a3, exc_table + l32i a2, a3, EXC_TABLE_DOUBLE_SAVE # restore a2 + l32i a3, a3, EXC_TABLE_PARAM # original WB (in user task) + + /* Return to the original (user task) WINDOWBASE. + * We leave the following frame behind: + * a0, a1, a2 same + * a3: trashed (saved in excsave_1) + * depc: depc (we have to return to that address) + * excsave_1: a3 + */ + + wsr a3, WINDOWBASE + rsync + + /* We are now in the original frame when we entered _spill_registers: + * a0: return address + * a1: used, stack pointer + * a2: kernel stack pointer + * a3: available, saved in EXCSAVE_1 + * depc: exception address + * excsave: a3 + * Note: This frame might be the same as above. + */ + +#ifdef SIGNAL_HANDLING_IN_DOUBLE_EXCEPTION + /* Restore registers we precautiously saved. + * We have the value of the 'right' a3 + */ + + l32i a7, a2, PT_AREG5 + l32i a11, a2, PT_AREG6 + l32i a15, a2, PT_AREG7 +#endif + + /* Setup stack pointer. */ + + addi a2, a2, -PT_USER_SIZE + s32i a0, a2, PT_AREG0 + + /* Make sure we return to this fixup handler. */ + + movi a3, fast_syscall_spill_registers_fixup_return + s32i a3, a2, PT_DEPC # setup depc + + /* Jump to the exception handler. */ + + movi a3, exc_table + rsr a0, EXCCAUSE + addx4 a0, a0, a3 # find entry in table + l32i a0, a0, EXC_TABLE_FAST_USER # load handler + jx a0 + +fast_syscall_spill_registers_fixup_return: + + /* When we return here, all registers have been restored (a2: DEPC) */ + + wsr a2, DEPC # exception address + + /* Restore fixup handler. */ + + xsr a3, EXCSAVE_1 + movi a2, fast_syscall_spill_registers_fixup + s32i a2, a3, EXC_TABLE_FIXUP + rsr a2, WINDOWBASE + s32i a2, a3, EXC_TABLE_PARAM + l32i a2, a3, EXC_TABLE_KSTK + +#ifdef SIGNAL_HANDLING_IN_DOUBLE_EXCEPTION + /* Save registers again that might be clobbered. */ + + s32i a7, a2, PT_AREG5 + s32i a11, a2, PT_AREG6 + s32i a15, a2, PT_AREG7 +#endif + + /* Load WB at the time the exception occurred. */ + + rsr a3, SAR # WB is still in SAR + neg a3, a3 + wsr a3, WINDOWBASE + rsync + + /* Restore a3 and return. */ + + movi a3, exc_table + xsr a3, EXCSAVE_1 + + rfde + + +/* + * spill all registers. + * + * This is not a real function. The following conditions must be met: + * + * - must be called with call0. + * - uses DEPC, a3 and SAR. + * - the last 'valid' register of each frame are clobbered. + * - the caller must have registered a fixup handler + * (or be inside a critical section) + * - PS_EXCM must be set (PS_WOE cleared?) + */ + +ENTRY(_spill_registers) + + /* + * Rotate ws so that the current windowbase is at bit 0. + * Assume ws = xxxwww1yy (www1 current window frame). + * Rotate ws right so that a2 = yyxxxwww1. + */ + + wsr a2, DEPC # preserve a2 + rsr a2, WINDOWBASE + rsr a3, WINDOWSTART + ssr a2 # holds WB + slli a2, a3, WSBITS + or a3, a3, a2 # a2 = xxxwww1yyxxxwww1yy + srl a3, a3 + + /* We are done if there are no more than the current register frame. */ + + extui a3, a3, 1, WSBITS-2 # a3 = 0yyxxxwww + movi a2, (1 << (WSBITS-1)) + _beqz a3, .Lnospill # only one active frame? jump + + /* We want 1 at the top, so that we return to the current windowbase */ + + or a3, a3, a2 # 1yyxxxwww + + /* Skip empty frames - get 'oldest' WINDOWSTART-bit. */ + + wsr a3, WINDOWSTART # save shifted windowstart + neg a2, a3 + and a3, a2, a3 # first bit set from right: 000010000 + + ffs_ws a2, a3 # a2: shifts to skip empty frames + movi a3, WSBITS + sub a2, a3, a2 # WSBITS-a2:number of 0-bits from right + ssr a2 # save in SAR for later. + + rsr a3, WINDOWBASE + add a3, a3, a2 + rsr a2, DEPC # restore a2 + wsr a3, WINDOWBASE + rsync + + rsr a3, WINDOWSTART + srl a3, a3 # shift windowstart + + /* WB is now just one frame below the oldest frame in the register + window. WS is shifted so the oldest frame is in bit 0, thus, WB + and WS differ by one 4-register frame. */ + + /* Save frames. Depending what call was used (call4, call8, call12), + * we have to save 4,8. or 12 registers. + */ + + _bbsi.l a3, 1, .Lc4 + _bbsi.l a3, 2, .Lc8 + + /* Special case: we have a call12-frame starting at a4. */ + + _bbci.l a3, 3, .Lc12 # bit 3 shouldn't be zero! (Jump to Lc12 first) + + s32e a4, a1, -16 # a1 is valid with an empty spill area + l32e a4, a5, -12 + s32e a8, a4, -48 + mov a8, a4 + l32e a4, a1, -16 + j .Lc12c + +.Lloop: _bbsi.l a3, 1, .Lc4 + _bbci.l a3, 2, .Lc12 + +.Lc8: s32e a4, a13, -16 + l32e a4, a5, -12 + s32e a8, a4, -32 + s32e a5, a13, -12 + s32e a6, a13, -8 + s32e a7, a13, -4 + s32e a9, a4, -28 + s32e a10, a4, -24 + s32e a11, a4, -20 + + srli a11, a3, 2 # shift windowbase by 2 + rotw 2 + _bnei a3, 1, .Lloop + +.Lexit: /* Done. Do the final rotation, set WS, and return. */ + + rotw 1 + rsr a3, WINDOWBASE + ssl a3 + movi a3, 1 + sll a3, a3 + wsr a3, WINDOWSTART + +.Lnospill: + jx a0 + +.Lc4: s32e a4, a9, -16 + s32e a5, a9, -12 + s32e a6, a9, -8 + s32e a7, a9, -4 + + srli a7, a3, 1 + rotw 1 + _bnei a3, 1, .Lloop + j .Lexit + +.Lc12: _bbci.l a3, 3, .Linvalid_mask # bit 2 shouldn't be zero! + + /* 12-register frame (call12) */ + + l32e a2, a5, -12 + s32e a8, a2, -48 + mov a8, a2 + +.Lc12c: s32e a9, a8, -44 + s32e a10, a8, -40 + s32e a11, a8, -36 + s32e a12, a8, -32 + s32e a13, a8, -28 + s32e a14, a8, -24 + s32e a15, a8, -20 + srli a15, a3, 3 + + /* The stack pointer for a4..a7 is out of reach, so we rotate the + * window, grab the stackpointer, and rotate back. + * Alternatively, we could also use the following approach, but that + * makes the fixup routine much more complicated: + * rotw 1 + * s32e a0, a13, -16 + * ... + * rotw 2 + */ + + rotw 1 + mov a5, a13 + rotw -1 + + s32e a4, a9, -16 + s32e a5, a9, -12 + s32e a6, a9, -8 + s32e a7, a9, -4 + + rotw 3 + + _beqi a3, 1, .Lexit + j .Lloop + +.Linvalid_mask: + + /* We get here because of an unrecoverable error in the window + * registers. If we are in user space, we kill the application, + * however, this condition is unrecoverable in kernel space. + */ + + rsr a0, PS + _bbci.l a0, PS_UM_SHIFT, 1f + + /* User space: Setup a dummy frame and kill application. + * Note: We assume EXC_TABLE_KSTK contains a valid stack pointer. + */ + + movi a0, 1 + movi a1, 0 + + wsr a0, WINDOWSTART + wsr a1, WINDOWBASE + rsync + + movi a0, 0 + + movi a3, exc_table + l32i a1, a3, EXC_TABLE_KSTK + wsr a3, EXCSAVE_1 + + movi a4, PS_WOE_MASK | 1 + wsr a4, PS + rsync + + movi a6, SIGSEGV + movi a4, do_exit + callx4 a4 + +1: /* Kernel space: PANIC! */ + + wsr a0, EXCSAVE_1 + movi a0, unrecoverable_exception + callx0 a0 # should not return +1: j 1b + +/* + * We should never get here. Bail out! + */ + +ENTRY(fast_second_level_miss_double_kernel) + +1: movi a0, unrecoverable_exception + callx0 a0 # should not return +1: j 1b + +/* First-level entry handler for user, kernel, and double 2nd-level + * TLB miss exceptions. Note that for now, user and kernel miss + * exceptions share the same entry point and are handled identically. + * + * An old, less-efficient C version of this function used to exist. + * We include it below, interleaved as comments, for reference. + * + * Entry condition: + * + * a0: trashed, original value saved on stack (PT_AREG0) + * a1: a1 + * a2: new stack pointer, original in DEPC + * a3: dispatch table + * depc: a2, original value saved on stack (PT_DEPC) + * excsave_1: a3 + * + * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC + * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception + */ + +ENTRY(fast_second_level_miss) + + /* Save a1. Note: we don't expect a double exception. */ + + s32i a1, a2, PT_AREG1 + + /* We need to map the page of PTEs for the user task. Find + * the pointer to that page. Also, it's possible for tsk->mm + * to be NULL while tsk->active_mm is nonzero if we faulted on + * a vmalloc address. In that rare case, we must use + * active_mm instead to avoid a fault in this handler. See + * + * http://mail.nl.linux.org/linux-mm/2002-08/msg00258.html + * (or search Internet on "mm vs. active_mm") + * + * if (!mm) + * mm = tsk->active_mm; + * pgd = pgd_offset (mm, regs->excvaddr); + * pmd = pmd_offset (pgd, regs->excvaddr); + * pmdval = *pmd; + */ + + GET_CURRENT(a1,a2) + l32i a0, a1, TASK_MM # tsk->mm + beqz a0, 9f + +8: rsr a1, EXCVADDR # fault address + _PGD_OFFSET(a0, a1, a1) + l32i a0, a0, 0 # read pmdval + //beqi a0, _PAGE_USER, 2f + beqz a0, 2f + + /* Read ptevaddr and convert to top of page-table page. + * + * vpnval = read_ptevaddr_register() & PAGE_MASK; + * vpnval += DTLB_WAY_PGTABLE; + * pteval = mk_pte (virt_to_page(pmd_val(pmdval)), PAGE_KERNEL); + * write_dtlb_entry (pteval, vpnval); + * + * The messy computation for 'pteval' above really simplifies + * into the following: + * + * pteval = ((pmdval - PAGE_OFFSET) & PAGE_MASK) | PAGE_KERNEL + */ + + movi a1, -PAGE_OFFSET + add a0, a0, a1 # pmdval - PAGE_OFFSET + extui a1, a0, 0, PAGE_SHIFT # ... & PAGE_MASK + xor a0, a0, a1 + + + movi a1, PAGE_DIRECTORY + or a0, a0, a1 # ... | PAGE_DIRECTORY + + rsr a1, PTEVADDR + srli a1, a1, PAGE_SHIFT + slli a1, a1, PAGE_SHIFT # ptevaddr & PAGE_MASK + addi a1, a1, DTLB_WAY_PGTABLE # ... + way_number + + wdtlb a0, a1 + dsync + + /* Exit critical section. */ + + movi a0, 0 + s32i a0, a3, EXC_TABLE_FIXUP + + /* Restore the working registers, and return. */ + + l32i a0, a2, PT_AREG0 + l32i a1, a2, PT_AREG1 + l32i a2, a2, PT_DEPC + xsr a3, EXCSAVE_1 + + bgeui a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f + + /* Restore excsave1 and return. */ + + rsr a2, DEPC + rfe + + /* Return from double exception. */ + +1: xsr a2, DEPC + esync + rfde + +9: l32i a0, a1, TASK_ACTIVE_MM # unlikely case mm == 0 + j 8b + +2: /* Invalid PGD, default exception handling */ + + rsr a1, DEPC + xsr a3, EXCSAVE_1 + s32i a1, a2, PT_AREG2 + s32i a3, a2, PT_AREG3 + mov a1, a2 + + rsr a2, PS + bbsi.l a2, PS_UM_SHIFT, 1f + j _kernel_exception +1: j _user_exception + + +/* + * StoreProhibitedException + * + * Update the pte and invalidate the itlb mapping for this pte. + * + * Entry condition: + * + * a0: trashed, original value saved on stack (PT_AREG0) + * a1: a1 + * a2: new stack pointer, original in DEPC + * a3: dispatch table + * depc: a2, original value saved on stack (PT_DEPC) + * excsave_1: a3 + * + * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC + * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception + */ + +ENTRY(fast_store_prohibited) + + /* Save a1 and a4. */ + + s32i a1, a2, PT_AREG1 + s32i a4, a2, PT_AREG4 + + GET_CURRENT(a1,a2) + l32i a0, a1, TASK_MM # tsk->mm + beqz a0, 9f + +8: rsr a1, EXCVADDR # fault address + _PGD_OFFSET(a0, a1, a4) + l32i a0, a0, 0 + //beqi a0, _PAGE_USER, 2f # FIXME use _PAGE_INVALID + beqz a0, 2f + + _PTE_OFFSET(a0, a1, a4) + l32i a4, a0, 0 # read pteval + movi a1, _PAGE_VALID | _PAGE_RW + bnall a4, a1, 2f + + movi a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_WRENABLE + or a4, a4, a1 + rsr a1, EXCVADDR + s32i a4, a0, 0 + + /* We need to flush the cache if we have page coloring. */ +#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK + dhwb a0, 0 +#endif + pdtlb a0, a1 + beqz a0, 1f + idtlb a0 // FIXME do we need this? + wdtlb a4, a0 +1: + + /* Exit critical section. */ + + movi a0, 0 + s32i a0, a3, EXC_TABLE_FIXUP + + /* Restore the working registers, and return. */ + + l32i a4, a2, PT_AREG4 + l32i a1, a2, PT_AREG1 + l32i a0, a2, PT_AREG0 + l32i a2, a2, PT_DEPC + + /* Restore excsave1 and a3. */ + + xsr a3, EXCSAVE_1 + bgeui a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f + + rsr a2, DEPC + rfe + + /* Double exception. Restore FIXUP handler and return. */ + +1: xsr a2, DEPC + esync + rfde + +9: l32i a0, a1, TASK_ACTIVE_MM # unlikely case mm == 0 + j 8b + +2: /* If there was a problem, handle fault in C */ + + rsr a4, DEPC # still holds a2 + xsr a3, EXCSAVE_1 + s32i a4, a2, PT_AREG2 + s32i a3, a2, PT_AREG3 + l32i a4, a2, PT_AREG4 + mov a1, a2 + + rsr a2, PS + bbsi.l a2, PS_UM_SHIFT, 1f + j _kernel_exception +1: j _user_exception + + +#if XCHAL_EXTRA_SA_SIZE + +#warning fast_coprocessor untested + +/* + * Entry condition: + * + * a0: trashed, original value saved on stack (PT_AREG0) + * a1: a1 + * a2: new stack pointer, original in DEPC + * a3: dispatch table + * depc: a2, original value saved on stack (PT_DEPC) + * excsave_1: a3 + * + * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC + * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception + */ + +ENTRY(fast_coprocessor_double) + wsr a0, EXCSAVE_1 + movi a0, unrecoverable_exception + callx0 a0 + +ENTRY(fast_coprocessor) + + /* Fatal if we are in a double exception. */ + + l32i a0, a2, PT_DEPC + _bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_coprocessor_double + + /* Save some registers a1, a3, a4, SAR */ + + xsr a3, EXCSAVE_1 + s32i a3, a2, PT_AREG3 + rsr a3, SAR + s32i a4, a2, PT_AREG4 + s32i a1, a2, PT_AREG1 + s32i a5, a1, PT_AREG5 + s32i a3, a2, PT_SAR + mov a1, a2 + + /* Currently, the HAL macros only guarantee saving a0 and a1. + * These can and will be refined in the future, but for now, + * just save the remaining registers of a2...a15. + */ + s32i a6, a1, PT_AREG6 + s32i a7, a1, PT_AREG7 + s32i a8, a1, PT_AREG8 + s32i a9, a1, PT_AREG9 + s32i a10, a1, PT_AREG10 + s32i a11, a1, PT_AREG11 + s32i a12, a1, PT_AREG12 + s32i a13, a1, PT_AREG13 + s32i a14, a1, PT_AREG14 + s32i a15, a1, PT_AREG15 + + /* Find coprocessor number. Subtract first CP EXCCAUSE from EXCCAUSE */ + + rsr a0, EXCCAUSE + addi a3, a0, -XCHAL_EXCCAUSE_COPROCESSOR0_DISABLED + + /* Set corresponding CPENABLE bit */ + + movi a4, 1 + ssl a3 # SAR: 32 - coprocessor_number + rsr a5, CPENABLE + sll a4, a4 + or a4, a5, a4 + wsr a4, CPENABLE + rsync + movi a5, coprocessor_info # list of owner and offset into cp_save + addx8 a0, a4, a5 # entry for CP + + bne a4, a5, .Lload # bit wasn't set before, cp not in use + + /* Now compare the current task with the owner of the coprocessor. + * If they are the same, there is no reason to save or restore any + * coprocessor state. Having already enabled the coprocessor, + * branch ahead to return. + */ + GET_CURRENT(a5,a1) + l32i a4, a0, COPROCESSOR_INFO_OWNER # a4: current owner for this CP + beq a4, a5, .Ldone + + /* Find location to dump current coprocessor state: + * task_struct->task_cp_save_offset + coprocessor_offset[coprocessor] + * + * Note: a0 pointer to the entry in the coprocessor owner table, + * a3 coprocessor number, + * a4 current owner of coprocessor. + */ + l32i a5, a0, COPROCESSOR_INFO_OFFSET + addi a2, a4, THREAD_CP_SAVE + add a2, a2, a5 + + /* Store current coprocessor states. (a5 still has CP number) */ + + xchal_cpi_store_funcbody + + /* The macro might have destroyed a3 (coprocessor number), but + * SAR still has 32 - coprocessor_number! + */ + movi a3, 32 + rsr a4, SAR + sub a3, a3, a4 + +.Lload: /* A new task now owns the corpocessors. Save its TCB pointer into + * the coprocessor owner table. + * + * Note: a0 pointer to the entry in the coprocessor owner table, + * a3 coprocessor number. + */ + GET_CURRENT(a4,a1) + s32i a4, a0, 0 + + /* Find location from where to restore the current coprocessor state.*/ + + l32i a5, a0, COPROCESSOR_INFO_OFFSET + addi a2, a4, THREAD_CP_SAVE + add a2, a2, a4 + + xchal_cpi_load_funcbody + + /* We must assume that the xchal_cpi_store_funcbody macro destroyed + * registers a2..a15. + */ + +.Ldone: l32i a15, a1, PT_AREG15 + l32i a14, a1, PT_AREG14 + l32i a13, a1, PT_AREG13 + l32i a12, a1, PT_AREG12 + l32i a11, a1, PT_AREG11 + l32i a10, a1, PT_AREG10 + l32i a9, a1, PT_AREG9 + l32i a8, a1, PT_AREG8 + l32i a7, a1, PT_AREG7 + l32i a6, a1, PT_AREG6 + l32i a5, a1, PT_AREG5 + l32i a4, a1, PT_AREG4 + l32i a3, a1, PT_AREG3 + l32i a2, a1, PT_AREG2 + l32i a0, a1, PT_AREG0 + l32i a1, a1, PT_AREG1 + + rfe + +#endif /* XCHAL_EXTRA_SA_SIZE */ + +/* + * Task switch. + * + * struct task* _switch_to (struct task* prev, struct task* next) + * a2 a2 a3 + */ + +ENTRY(_switch_to) + + entry a1, 16 + + mov a4, a3 # preserve a3 + + s32i a0, a2, THREAD_RA # save return address + s32i a1, a2, THREAD_SP # save stack pointer + + /* Disable ints while we manipulate the stack pointer; spill regs. */ + + movi a5, PS_EXCM_MASK | LOCKLEVEL + xsr a5, PS + rsr a3, EXCSAVE_1 + rsync + s32i a3, a3, EXC_TABLE_FIXUP /* enter critical section */ + + call0 _spill_registers + + /* Set kernel stack (and leave critical section) + * Note: It's save to set it here. The stack will not be overwritten + * because the kernel stack will only be loaded again after + * we return from kernel space. + */ + + l32i a0, a4, TASK_THREAD_INFO + rsr a3, EXCSAVE_1 # exc_table + movi a1, 0 + addi a0, a0, PT_REGS_OFFSET + s32i a1, a3, EXC_TABLE_FIXUP + s32i a0, a3, EXC_TABLE_KSTK + + /* restore context of the task that 'next' addresses */ + + l32i a0, a4, THREAD_RA /* restore return address */ + l32i a1, a4, THREAD_SP /* restore stack pointer */ + + wsr a5, PS + rsync + + retw + + +ENTRY(ret_from_fork) + + /* void schedule_tail (struct task_struct *prev) + * Note: prev is still in a6 (return value from fake call4 frame) + */ + movi a4, schedule_tail + callx4 a4 + + movi a4, do_syscall_trace + callx4 a4 + + j common_exception_return + + + +/* + * Table of syscalls + */ + +.data +.align 4 +.global sys_call_table +sys_call_table: + +#define SYSCALL(call, narg) .word call +#include "syscalls.h" + +/* + * Number of arguments of each syscall + */ + +.global sys_narg_table +sys_narg_table: + +#undef SYSCALL +#define SYSCALL(call, narg) .byte narg +#include "syscalls.h" + diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S new file mode 100644 index 000000000000..6e9b5225b8f6 --- /dev/null +++ b/arch/xtensa/kernel/head.S @@ -0,0 +1,237 @@ +/* + * arch/xtensa/kernel/head.S + * + * Xtensa Processor startup code. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca> + * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> + * Kevin Chea + */ + +#include <xtensa/cacheasm.h> +#include <linux/config.h> +#include <asm/processor.h> +#include <asm/page.h> + +/* + * This module contains the entry code for kernel images. It performs the + * minimal setup needed to call the generic C routines. + * + * Prerequisites: + * + * - The kernel image has been loaded to the actual address where it was + * compiled to. + * - a2 contains either 0 or a pointer to a list of boot parameters. + * (see setup.c for more details) + * + */ + + .macro iterate from, to , cmd + .ifeq ((\to - \from) & ~0xfff) + \cmd \from + iterate "(\from+1)", \to, \cmd + .endif + .endm + +/* + * _start + * + * The bootloader passes a pointer to a list of boot parameters in a2. + */ + + /* The first bytes of the kernel image must be an instruction, so we + * manually allocate and define the literal constant we need for a jx + * instruction. + */ + + .section .head.text, "ax" + .globl _start +_start: _j 2f + .align 4 +1: .word _startup +2: l32r a0, 1b + jx a0 + + .text + .align 4 +_startup: + + /* Disable interrupts and exceptions. */ + + movi a0, XCHAL_PS_EXCM_MASK + wsr a0, PS + + /* Preserve the pointer to the boot parameter list in EXCSAVE_1 */ + + wsr a2, EXCSAVE_1 + + /* Start with a fresh windowbase and windowstart. */ + + movi a1, 1 + movi a0, 0 + wsr a1, WINDOWSTART + wsr a0, WINDOWBASE + rsync + + /* Set a0 to 0 for the remaining initialization. */ + + movi a0, 0 + + /* Clear debugging registers. */ + +#if XCHAL_HAVE_DEBUG + wsr a0, IBREAKENABLE + wsr a0, ICOUNT + movi a1, 15 + wsr a0, ICOUNTLEVEL + + .macro reset_dbreak num + wsr a0, DBREAKC + \num + .endm + + iterate 0, XCHAL_NUM_IBREAK-1, reset_dbreak +#endif + + /* Clear CCOUNT (not really necessary, but nice) */ + + wsr a0, CCOUNT # not really necessary, but nice + + /* Disable zero-loops. */ + +#if XCHAL_HAVE_LOOPS + wsr a0, LCOUNT +#endif + + /* Disable all timers. */ + + .macro reset_timer num + wsr a0, CCOMPARE_0 + \num + .endm + iterate 0, XCHAL_NUM_TIMERS-1, reset_timer + + /* Interrupt initialization. */ + + movi a2, XCHAL_INTTYPE_MASK_SOFTWARE | XCHAL_INTTYPE_MASK_EXTERN_EDGE + wsr a0, INTENABLE + wsr a2, INTCLEAR + + /* Disable coprocessors. */ + +#if XCHAL_CP_NUM > 0 + wsr a0, CPENABLE +#endif + + /* Set PS.INTLEVEL=1, PS.WOE=0, kernel stack, PS.EXCM=0 + * + * Note: PS.EXCM must be cleared before using any loop + * instructions; otherwise, they are silently disabled, and + * at most one iteration of the loop is executed. + */ + + movi a1, 1 + wsr a1, PS + rsync + + /* Initialize the caches. + * Does not include flushing writeback d-cache. + * a6, a7 are just working registers (clobbered). + */ + + icache_reset a2, a3 + dcache_reset a2, a3 + + /* Unpack data sections + * + * The linker script used to build the Linux kernel image + * creates a table located at __boot_reloc_table_start + * that contans the information what data needs to be unpacked. + * + * Uses a2-a7. + */ + + movi a2, __boot_reloc_table_start + movi a3, __boot_reloc_table_end + +1: beq a2, a3, 3f # no more entries? + l32i a4, a2, 0 # start destination (in RAM) + l32i a5, a2, 4 # end desination (in RAM) + l32i a6, a2, 8 # start source (in ROM) + addi a2, a2, 12 # next entry + beq a4, a5, 1b # skip, empty entry + beq a4, a6, 1b # skip, source and dest. are the same + +2: l32i a7, a6, 0 # load word + addi a6, a6, 4 + s32i a7, a4, 0 # store word + addi a4, a4, 4 + bltu a4, a5, 2b + j 1b + +3: + /* All code and initialized data segments have been copied. + * Now clear the BSS segment. + */ + + movi a2, _bss_start # start of BSS + movi a3, _bss_end # end of BSS + +1: addi a2, a2, 4 + s32i a0, a2, 0 + blt a2, a3, 1b + +#if XCHAL_DCACHE_IS_WRITEBACK + + /* After unpacking, flush the writeback cache to memory so the + * instructions/data are available. + */ + + dcache_writeback_all a2, a3 +#endif + + /* Setup stack and enable window exceptions (keep irqs disabled) */ + + movi a1, init_thread_union + addi a1, a1, KERNEL_STACK_SIZE + + movi a2, 0x00040001 # WOE=1, INTLEVEL=1, UM=0 + wsr a2, PS # (enable reg-windows; progmode stack) + rsync + + /* Set up EXCSAVE[DEBUGLEVEL] to point to the Debug Exception Handler.*/ + + movi a2, debug_exception + wsr a2, EXCSAVE + XCHAL_DEBUGLEVEL + + /* Set up EXCSAVE[1] to point to the exc_table. */ + + movi a6, exc_table + xsr a6, EXCSAVE_1 + + /* init_arch kick-starts the linux kernel */ + + movi a4, init_arch + callx4 a4 + + movi a4, start_kernel + callx4 a4 + +should_never_return: + j should_never_return + + /* Define some common data structures here. We define them + * here in this assembly file due to their unusual alignment + * requirements. + */ + + .comm swapper_pg_dir,PAGE_SIZE,PAGE_SIZE + .comm empty_bad_page_table,PAGE_SIZE,PAGE_SIZE + .comm empty_bad_page,PAGE_SIZE,PAGE_SIZE + .comm empty_zero_page,PAGE_SIZE,PAGE_SIZE + diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c new file mode 100644 index 000000000000..4cbf6d91571f --- /dev/null +++ b/arch/xtensa/kernel/irq.c @@ -0,0 +1,192 @@ +/* + * linux/arch/xtensa/kernel/irq.c + * + * Xtensa built-in interrupt controller and some generic functions copied + * from i386. + * + * Copyright (C) 2002 - 2005 Tensilica, Inc. + * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar + * + * + * Chris Zankel <chris@zankel.net> + * Kevin Chea + * + */ + +#include <linux/module.h> +#include <linux/seq_file.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel_stat.h> + +#include <asm/uaccess.h> +#include <asm/platform.h> + +static void enable_xtensa_irq(unsigned int irq); +static void disable_xtensa_irq(unsigned int irq); +static void mask_and_ack_xtensa(unsigned int irq); +static void end_xtensa_irq(unsigned int irq); + +static unsigned int cached_irq_mask; + +atomic_t irq_err_count; + +/* + * 'what should we do if we get a hw irq event on an illegal vector'. + * each architecture has to answer this themselves. + */ +void ack_bad_irq(unsigned int irq) +{ + printk("unexpected IRQ trap at vector %02x\n", irq); +} + +/* + * do_IRQ handles all normal device IRQ's (the special + * SMP cross-CPU interrupts have their own specific + * handlers). + */ + +unsigned int do_IRQ(int irq, struct pt_regs *regs) +{ + irq_enter(); + +#ifdef CONFIG_DEBUG_STACKOVERFLOW + /* Debugging check for stack overflow: is there less than 1KB free? */ + { + unsigned long sp; + + __asm__ __volatile__ ("mov %0, a1\n" : "=a" (sp)); + sp &= THREAD_SIZE - 1; + + if (unlikely(sp < (sizeof(thread_info) + 1024))) + printk("Stack overflow in do_IRQ: %ld\n", + sp - sizeof(struct thread_info)); + } +#endif + + __do_IRQ(irq, regs); + + irq_exit(); + + return 1; +} + +/* + * Generic, controller-independent functions: + */ + +int show_interrupts(struct seq_file *p, void *v) +{ + int i = *(loff_t *) v, j; + struct irqaction * action; + unsigned long flags; + + if (i == 0) { + seq_printf(p, " "); + for (j=0; j<NR_CPUS; j++) + if (cpu_online(j)) + seq_printf(p, "CPU%d ",j); + seq_putc(p, '\n'); + } + + if (i < NR_IRQS) { + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; + if (!action) + goto skip; + seq_printf(p, "%3d: ",i); +#ifndef CONFIG_SMP + seq_printf(p, "%10u ", kstat_irqs(i)); +#else + for (j = 0; j < NR_CPUS; j++) + if (cpu_online(j)) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); +#endif + seq_printf(p, " %14s", irq_desc[i].handler->typename); + seq_printf(p, " %s", action->name); + + for (action=action->next; action; action = action->next) + seq_printf(p, ", %s", action->name); + + seq_putc(p, '\n'); +skip: + spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } else if (i == NR_IRQS) { + seq_printf(p, "NMI: "); + for (j = 0; j < NR_CPUS; j++) + if (cpu_online(j)) + seq_printf(p, "%10u ", nmi_count(j)); + seq_putc(p, '\n'); + seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); + } + return 0; +} +/* shutdown is same as "disable" */ +#define shutdown_xtensa_irq disable_xtensa_irq + +static unsigned int startup_xtensa_irq(unsigned int irq) +{ + enable_xtensa_irq(irq); + return 0; /* never anything pending */ +} + +static struct hw_interrupt_type xtensa_irq_type = { + "Xtensa-IRQ", + startup_xtensa_irq, + shutdown_xtensa_irq, + enable_xtensa_irq, + disable_xtensa_irq, + mask_and_ack_xtensa, + end_xtensa_irq +}; + +static inline void mask_irq(unsigned int irq) +{ + cached_irq_mask &= ~(1 << irq); + set_sr (cached_irq_mask, INTENABLE); +} + +static inline void unmask_irq(unsigned int irq) +{ + cached_irq_mask |= 1 << irq; + set_sr (cached_irq_mask, INTENABLE); +} + +static void disable_xtensa_irq(unsigned int irq) +{ + unsigned long flags; + local_save_flags(flags); + mask_irq(irq); + local_irq_restore(flags); +} + +static void enable_xtensa_irq(unsigned int irq) +{ + unsigned long flags; + local_save_flags(flags); + unmask_irq(irq); + local_irq_restore(flags); +} + +static void mask_and_ack_xtensa(unsigned int irq) +{ + disable_xtensa_irq(irq); +} + +static void end_xtensa_irq(unsigned int irq) +{ + enable_xtensa_irq(irq); +} + + +void __init init_IRQ(void) +{ + int i; + + for (i=0; i < XTENSA_NR_IRQS; i++) + irq_desc[i].handler = &xtensa_irq_type; + + cached_irq_mask = 0; + + platform_init_irq(); +} diff --git a/arch/xtensa/kernel/module.c b/arch/xtensa/kernel/module.c new file mode 100644 index 000000000000..d1683cfa19a2 --- /dev/null +++ b/arch/xtensa/kernel/module.c @@ -0,0 +1,78 @@ +/* + * arch/xtensa/kernel/platform.c + * + * Module support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + * + */ + +#include <linux/module.h> +#include <linux/moduleloader.h> +#include <linux/elf.h> +#include <linux/vmalloc.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/cache.h> + +LIST_HEAD(module_buf_list); + +void *module_alloc(unsigned long size) +{ + panic("module_alloc not implemented"); +} + +void module_free(struct module *mod, void *module_region) +{ + panic("module_free not implemented"); +} + +int module_frob_arch_sections(Elf32_Ehdr *hdr, + Elf32_Shdr *sechdrs, + char *secstrings, + struct module *me) +{ + panic("module_frob_arch_sections not implemented"); +} + +int apply_relocate(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *module) +{ + panic ("apply_relocate not implemented"); +} + +int apply_relocate_add(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *module) +{ + panic("apply_relocate_add not implemented"); +} + +int module_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + struct module *me) +{ + panic ("module_finalize not implemented"); +} + +void module_arch_cleanup(struct module *mod) +{ + panic("module_arch_cleanup not implemented"); +} + +struct bug_entry *module_find_bug(unsigned long bugaddr) +{ + panic("module_find_bug not implemented"); +} diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c new file mode 100644 index 000000000000..84fde258cf85 --- /dev/null +++ b/arch/xtensa/kernel/pci-dma.c @@ -0,0 +1,73 @@ +/* + * arch/xtensa/pci-dma.c + * + * DMA coherent memory allocation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Copyright (C) 2002 - 2005 Tensilica Inc. + * + * Based on version for i386. + * + * Chris Zankel <chris@zankel.net> + * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> + */ + +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/pci.h> +#include <asm/io.h> +#include <asm/cacheflush.h> + +/* + * Note: We assume that the full memory space is always mapped to 'kseg' + * Otherwise we have to use page attributes (not implemented). + */ + +void * +dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp) +{ + void *ret; + + /* ignore region speicifiers */ + gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); + + if (dev == NULL || (*dev->dma_mask < 0xffffffff)) + gfp |= GFP_DMA; + ret = (void *)__get_free_pages(gfp, get_order(size)); + + if (ret != NULL) { + memset(ret, 0, size); + *handle = virt_to_bus(ret); + } + return (void*) BYPASS_ADDR((unsigned long)ret); +} + +void dma_free_coherent(struct device *hwdev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + free_pages(CACHED_ADDR((unsigned long)vaddr), get_order(size)); +} + + +void consistent_sync(void *vaddr, size_t size, int direction) +{ + switch (direction) { + case PCI_DMA_NONE: + BUG(); + case PCI_DMA_FROMDEVICE: /* invalidate only */ + __invalidate_dcache_range((unsigned long)vaddr, + (unsigned long)size); + break; + + case PCI_DMA_TODEVICE: /* writeback only */ + case PCI_DMA_BIDIRECTIONAL: /* writeback and invalidate */ + __flush_invalidate_dcache_range((unsigned long)vaddr, + (unsigned long)size); + break; + } +} diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c new file mode 100644 index 000000000000..09887c96e9a1 --- /dev/null +++ b/arch/xtensa/kernel/pci.c @@ -0,0 +1,478 @@ +/* + * arch/xtensa/pcibios.c + * + * PCI bios-type initialisation for PCI machines + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Copyright (C) 2001-2005 Tensilica Inc. + * + * Based largely on work from Cort (ppc/kernel/pci.c) + * IO functions copied from sparc. + * + * Chris Zankel <chris@zankel.net> + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/bootmem.h> + +#include <asm/pci-bridge.h> +#include <asm/platform.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +/* PCI Controller */ + + +/* + * pcibios_alloc_controller + * pcibios_enable_device + * pcibios_fixups + * pcibios_align_resource + * pcibios_fixup_bus + * pcibios_setup + * pci_bus_add_device + * pci_mmap_page_range + */ + +struct pci_controller* pci_ctrl_head; +struct pci_controller** pci_ctrl_tail = &pci_ctrl_head; + +static int pci_bus_count; + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + * + * Why? Because some silly external IO cards only decode + * the low 10 bits of the IO address. The 0x00-0xff region + * is reserved for motherboard devices that decode all 16 + * bits, so it's ok to allocate at, say, 0x2800-0x28ff, + * but we want to try to avoid allocating at 0x2900-0x2bff + * which might have be mirrored at 0x0100-0x03ff.. + */ +void +pcibios_align_resource(void *data, struct resource *res, unsigned long size, + unsigned long align) +{ + struct pci_dev *dev = data; + + if (res->flags & IORESOURCE_IO) { + unsigned long start = res->start; + + if (size > 0x100) { + printk(KERN_ERR "PCI: I/O Region %s/%d too large" + " (%ld bytes)\n", pci_name(dev), + dev->resource - res, size); + } + + if (start & 0x300) { + start = (start + 0x3ff) & ~0x3ff; + res->start = start; + } + } +} + +int +pcibios_enable_resources(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for(idx=0; idx<6; idx++) { + r = &dev->resource[idx]; + if (!r->start && r->end) { + printk (KERN_ERR "PCI: Device %s not available because " + "of resource collisions\n", pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (dev->resource[PCI_ROM_RESOURCE].start) + cmd |= PCI_COMMAND_MEMORY; + if (cmd != old_cmd) { + printk("PCI: Enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +struct pci_controller * __init pcibios_alloc_controller(void) +{ + struct pci_controller *pci_ctrl; + + pci_ctrl = (struct pci_controller *)alloc_bootmem(sizeof(*pci_ctrl)); + memset(pci_ctrl, 0, sizeof(struct pci_controller)); + + *pci_ctrl_tail = pci_ctrl; + pci_ctrl_tail = &pci_ctrl->next; + + return pci_ctrl; +} + +static int __init pcibios_init(void) +{ + struct pci_controller *pci_ctrl; + struct pci_bus *bus; + int next_busno = 0, i; + + printk("PCI: Probing PCI hardware\n"); + + /* Scan all of the recorded PCI controllers. */ + for (pci_ctrl = pci_ctrl_head; pci_ctrl; pci_ctrl = pci_ctrl->next) { + pci_ctrl->last_busno = 0xff; + bus = pci_scan_bus(pci_ctrl->first_busno, pci_ctrl->ops, + pci_ctrl); + if (pci_ctrl->io_resource.flags) { + unsigned long offs; + + offs = (unsigned long)pci_ctrl->io_space.base; + pci_ctrl->io_resource.start += offs; + pci_ctrl->io_resource.end += offs; + bus->resource[0] = &pci_ctrl->io_resource; + } + for (i = 0; i < 3; ++i) + if (pci_ctrl->mem_resources[i].flags) + bus->resource[i+1] =&pci_ctrl->mem_resources[i]; + pci_ctrl->bus = bus; + pci_ctrl->last_busno = bus->subordinate; + if (next_busno <= pci_ctrl->last_busno) + next_busno = pci_ctrl->last_busno+1; + } + pci_bus_count = next_busno; + + return platform_pcibios_fixup(); +} + +subsys_initcall(pcibios_init); + +void __init pcibios_fixup_bus(struct pci_bus *bus) +{ + struct pci_controller *pci_ctrl = bus->sysdata; + struct resource *res; + unsigned long io_offset; + int i; + + io_offset = (unsigned long)pci_ctrl->io_space.base; + if (bus->parent == NULL) { + /* this is a host bridge - fill in its resources */ + pci_ctrl->bus = bus; + + bus->resource[0] = res = &pci_ctrl->io_resource; + if (!res->flags) { + if (io_offset) + printk (KERN_ERR "I/O resource not set for host" + " bridge %d\n", pci_ctrl->index); + res->start = 0; + res->end = IO_SPACE_LIMIT; + res->flags = IORESOURCE_IO; + } + res->start += io_offset; + res->end += io_offset; + + for (i = 0; i < 3; i++) { + res = &pci_ctrl->mem_resources[i]; + if (!res->flags) { + if (i > 0) + continue; + printk(KERN_ERR "Memory resource not set for " + "host bridge %d\n", pci_ctrl->index); + res->start = 0; + res->end = ~0U; + res->flags = IORESOURCE_MEM; + } + bus->resource[i+1] = res; + } + } else { + /* This is a subordinate bridge */ + pci_read_bridge_bases(bus); + + for (i = 0; i < 4; i++) { + if ((res = bus->resource[i]) == NULL || !res->flags) + continue; + if (io_offset && (res->flags & IORESOURCE_IO)) { + res->start += io_offset; + res->end += io_offset; + } + } + } +} + +char __init *pcibios_setup(char *str) +{ + return str; +} + +/* the next one is stolen from the alpha port... */ + +void __init +pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for (idx=0; idx<6; idx++) { + r = &dev->resource[idx]; + if (!r->start && r->end) { + printk(KERN_ERR "PCI: Device %s not available because " + "of resource collisions\n", pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (cmd != old_cmd) { + printk("PCI: Enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + + return 0; +} + +#ifdef CONFIG_PROC_FS + +/* + * Return the index of the PCI controller for device pdev. + */ + +int +pci_controller_num(struct pci_dev *dev) +{ + struct pci_controller *pci_ctrl = (struct pci_controller*) dev->sysdata; + return pci_ctrl->index; +} + +#endif /* CONFIG_PROC_FS */ + +/* + * Platform support for /proc/bus/pci/X/Y mmap()s, + * modelled on the sparc64 implementation by Dave Miller. + * -- paulus. + */ + +/* + * Adjust vm_pgoff of VMA such that it is the physical page offset + * corresponding to the 32-bit pci bus offset for DEV requested by the user. + * + * Basically, the user finds the base address for his device which he wishes + * to mmap. They read the 32-bit value from the config space base register, + * add whatever PAGE_SIZE multiple offset they wish, and feed this into the + * offset parameter of mmap on /proc/bus/pci/XXX for that device. + * + * Returns negative error code on failure, zero on success. + */ +static __inline__ int +__pci_mmap_make_offset(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state) +{ + struct pci_controller *pci_ctrl = (struct pci_controller*) dev->sysdata; + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + unsigned long io_offset = 0; + int i, res_bit; + + if (pci_ctrl == 0) + return -EINVAL; /* should never happen */ + + /* If memory, add on the PCI bridge address offset */ + if (mmap_state == pci_mmap_mem) { + res_bit = IORESOURCE_MEM; + } else { + io_offset = (unsigned long)pci_ctrl->io_space.base; + offset += io_offset; + res_bit = IORESOURCE_IO; + } + + /* + * Check that the offset requested corresponds to one of the + * resources of the device. + */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + struct resource *rp = &dev->resource[i]; + int flags = rp->flags; + + /* treat ROM as memory (should be already) */ + if (i == PCI_ROM_RESOURCE) + flags |= IORESOURCE_MEM; + + /* Active and same type? */ + if ((flags & res_bit) == 0) + continue; + + /* In the range of this resource? */ + if (offset < (rp->start & PAGE_MASK) || offset > rp->end) + continue; + + /* found it! construct the final physical address */ + if (mmap_state == pci_mmap_io) + offset += pci_ctrl->io_space.start - io_offset; + vma->vm_pgoff = offset >> PAGE_SHIFT; + return 0; + } + + return -EINVAL; +} + +/* + * Set vm_flags of VMA, as appropriate for this architecture, for a pci device + * mapping. + */ +static __inline__ void +__pci_mmap_set_flags(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state) +{ + vma->vm_flags |= VM_SHM | VM_LOCKED | VM_IO; +} + +/* + * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci + * device mapping. + */ +static __inline__ void +__pci_mmap_set_pgprot(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + int prot = pgprot_val(vma->vm_page_prot); + + /* Set to write-through */ + prot &= ~_PAGE_NO_CACHE; +#if 0 + if (!write_combine) + prot |= _PAGE_WRITETHRU; +#endif + vma->vm_page_prot = __pgprot(prot); +} + +/* + * Perform the actual remap of the pages for a PCI device mapping, as + * appropriate for this architecture. The region in the process to map + * is described by vm_start and vm_end members of VMA, the base physical + * address is found in vm_pgoff. + * The pci device structure is provided so that architectures may make mapping + * decisions on a per-device or per-bus basis. + * + * Returns a negative error code on failure, zero on success. + */ +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, + int write_combine) +{ + int ret; + + ret = __pci_mmap_make_offset(dev, vma, mmap_state); + if (ret < 0) + return ret; + + __pci_mmap_set_flags(dev, vma, mmap_state); + __pci_mmap_set_pgprot(dev, vma, mmap_state, write_combine); + + ret = io_remap_page_range(vma, vma->vm_start, vma->vm_pgoff<<PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot); + + return ret; +} + +/* + * This probably belongs here rather than ioport.c because + * we do not want this crud linked into SBus kernels. + * Also, think for a moment about likes of floppy.c that + * include architecture specific parts. They may want to redefine ins/outs. + * + * We do not use horroble macroses here because we want to + * advance pointer by sizeof(size). + */ +void outsb(unsigned long addr, const void *src, unsigned long count) { + while (count) { + count -= 1; + writeb(*(const char *)src, addr); + src += 1; + addr += 1; + } +} + +void outsw(unsigned long addr, const void *src, unsigned long count) { + while (count) { + count -= 2; + writew(*(const short *)src, addr); + src += 2; + addr += 2; + } +} + +void outsl(unsigned long addr, const void *src, unsigned long count) { + while (count) { + count -= 4; + writel(*(const long *)src, addr); + src += 4; + addr += 4; + } +} + +void insb(unsigned long addr, void *dst, unsigned long count) { + while (count) { + count -= 1; + *(unsigned char *)dst = readb(addr); + dst += 1; + addr += 1; + } +} + +void insw(unsigned long addr, void *dst, unsigned long count) { + while (count) { + count -= 2; + *(unsigned short *)dst = readw(addr); + dst += 2; + addr += 2; + } +} + +void insl(unsigned long addr, void *dst, unsigned long count) { + while (count) { + count -= 4; + /* + * XXX I am sure we are in for an unaligned trap here. + */ + *(unsigned long *)dst = readl(addr); + dst += 4; + addr += 4; + } +} + + + diff --git a/arch/xtensa/kernel/platform.c b/arch/xtensa/kernel/platform.c new file mode 100644 index 000000000000..cf1362784443 --- /dev/null +++ b/arch/xtensa/kernel/platform.c @@ -0,0 +1,49 @@ +/* + * arch/xtensa/kernel/platform.c + * + * Default platform functions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/time.h> +#include <asm/platform.h> +#include <asm/timex.h> + +#define _F(r,f,a,b) \ + r __platform_##f a b; \ + r platform_##f a __attribute__((weak, alias("__platform_"#f))) + +/* + * Default functions that are used if no platform specific function is defined. + * (Please, refer to include/asm-xtensa/platform.h for more information) + */ + +_F(void, setup, (char** cmd), { }); +_F(void, init_irq, (void), { }); +_F(void, restart, (void), { while(1); }); +_F(void, halt, (void), { while(1); }); +_F(void, power_off, (void), { while(1); }); +_F(void, idle, (void), { __asm__ __volatile__ ("waiti 0" ::: "memory"); }); +_F(void, heartbeat, (void), { }); +_F(int, pcibios_fixup, (void), { return 0; }); +_F(int, get_rtc_time, (time_t* t), { return 0; }); +_F(int, set_rtc_time, (time_t t), { return 0; }); + +#if CONFIG_XTENSA_CALIBRATE_CCOUNT +_F(void, calibrate_ccount, (void), +{ + printk ("ERROR: Cannot calibrate cpu frequency! Assuming 100MHz.\n"); + ccount_per_jiffy = 100 * (1000000UL/HZ); +}); +#endif + diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c new file mode 100644 index 000000000000..4099703b14be --- /dev/null +++ b/arch/xtensa/kernel/process.c @@ -0,0 +1,482 @@ +// TODO verify coprocessor handling +/* + * arch/xtensa/kernel/process.c + * + * Xtensa Processor version. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> + * Chris Zankel <chris@zankel.net> + * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca> + * Kevin Chea + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/elf.h> +#include <linux/init.h> +#include <linux/prctl.h> +#include <linux/init_task.h> +#include <linux/module.h> +#include <linux/mqueue.h> + +#include <asm/pgtable.h> +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/platform.h> +#include <asm/mmu.h> +#include <asm/irq.h> +#include <asm/atomic.h> +#include <asm/offsets.h> +#include <asm/coprocessor.h> + +extern void ret_from_fork(void); + +static struct fs_struct init_fs = INIT_FS; +static struct files_struct init_files = INIT_FILES; +static struct signal_struct init_signals = INIT_SIGNALS(init_signals); +static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); +struct mm_struct init_mm = INIT_MM(init_mm); +EXPORT_SYMBOL(init_mm); + +union thread_union init_thread_union + __attribute__((__section__(".data.init_task"))) = +{ INIT_THREAD_INFO(init_task) }; + +struct task_struct init_task = INIT_TASK(init_task); +EXPORT_SYMBOL(init_task); + +struct task_struct *current_set[NR_CPUS] = {&init_task, }; + + +#if XCHAL_CP_NUM > 0 + +/* + * Coprocessor ownership. + */ + +coprocessor_info_t coprocessor_info[] = { + { 0, XTENSA_CPE_CP0_OFFSET }, + { 0, XTENSA_CPE_CP1_OFFSET }, + { 0, XTENSA_CPE_CP2_OFFSET }, + { 0, XTENSA_CPE_CP3_OFFSET }, + { 0, XTENSA_CPE_CP4_OFFSET }, + { 0, XTENSA_CPE_CP5_OFFSET }, + { 0, XTENSA_CPE_CP6_OFFSET }, + { 0, XTENSA_CPE_CP7_OFFSET }, +}; + +#endif + +/* + * Powermanagement idle function, if any is provided by the platform. + */ + +void cpu_idle(void) +{ + local_irq_enable(); + + /* endless idle loop with no priority at all */ + while (1) { + while (!need_resched()) + platform_idle(); + preempt_enable(); + schedule(); + } +} + +/* + * Free current thread data structures etc.. + */ + +void exit_thread(void) +{ + release_coprocessors(current); /* Empty macro if no CPs are defined */ +} + +void flush_thread(void) +{ + release_coprocessors(current); /* Empty macro if no CPs are defined */ +} + +/* + * Copy thread. + * + * The stack layout for the new thread looks like this: + * + * +------------------------+ <- sp in childregs (= tos) + * | childregs | + * +------------------------+ <- thread.sp = sp in dummy-frame + * | dummy-frame | (saved in dummy-frame spill-area) + * +------------------------+ + * + * We create a dummy frame to return to ret_from_fork: + * a0 points to ret_from_fork (simulating a call4) + * sp points to itself (thread.sp) + * a2, a3 are unused. + * + * Note: This is a pristine frame, so we don't need any spill region on top of + * childregs. + */ + +int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, + unsigned long unused, + struct task_struct * p, struct pt_regs * regs) +{ + struct pt_regs *childregs; + unsigned long tos; + int user_mode = user_mode(regs); + + /* Set up new TSS. */ + tos = (unsigned long)p->thread_info + THREAD_SIZE; + if (user_mode) + childregs = (struct pt_regs*)(tos - PT_USER_SIZE); + else + childregs = (struct pt_regs*)tos - 1; + + *childregs = *regs; + + /* Create a call4 dummy-frame: a0 = 0, a1 = childregs. */ + *((int*)childregs - 3) = (unsigned long)childregs; + *((int*)childregs - 4) = 0; + + childregs->areg[1] = tos; + childregs->areg[2] = 0; + p->set_child_tid = p->clear_child_tid = NULL; + p->thread.ra = MAKE_RA_FOR_CALL((unsigned long)ret_from_fork, 0x1); + p->thread.sp = (unsigned long)childregs; + if (user_mode(regs)) { + + int len = childregs->wmask & ~0xf; + childregs->areg[1] = usp; + memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4], + ®s->areg[XCHAL_NUM_AREGS - len/4], len); + + if (clone_flags & CLONE_SETTLS) + childregs->areg[2] = childregs->areg[6]; + + } else { + /* In kernel space, we start a new thread with a new stack. */ + childregs->wmask = 1; + } + return 0; +} + + +/* + * Create a kernel thread + */ + +int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) +{ + long retval; + __asm__ __volatile__ + ("mov a5, %4\n\t" /* preserve fn in a5 */ + "mov a6, %3\n\t" /* preserve and setup arg in a6 */ + "movi a2, %1\n\t" /* load __NR_clone for syscall*/ + "mov a3, sp\n\t" /* sp check and sys_clone */ + "mov a4, %5\n\t" /* load flags for syscall */ + "syscall\n\t" + "beq a3, sp, 1f\n\t" /* branch if parent */ + "callx4 a5\n\t" /* call fn */ + "movi a2, %2\n\t" /* load __NR_exit for syscall */ + "mov a3, a6\n\t" /* load fn return value */ + "syscall\n" + "1:\n\t" + "mov %0, a2\n\t" /* parent returns zero */ + :"=r" (retval) + :"i" (__NR_clone), "i" (__NR_exit), + "r" (arg), "r" (fn), + "r" (flags | CLONE_VM) + : "a2", "a3", "a4", "a5", "a6" ); + return retval; +} + + +/* + * These bracket the sleeping functions.. + */ + +unsigned long get_wchan(struct task_struct *p) +{ + unsigned long sp, pc; + unsigned long stack_page = (unsigned long) p->thread_info; + int count = 0; + + if (!p || p == current || p->state == TASK_RUNNING) + return 0; + + sp = p->thread.sp; + pc = MAKE_PC_FROM_RA(p->thread.ra, p->thread.sp); + + do { + if (sp < stack_page + sizeof(struct task_struct) || + sp >= (stack_page + THREAD_SIZE) || + pc == 0) + return 0; + if (!in_sched_functions(pc)) + return pc; + + /* Stack layout: sp-4: ra, sp-3: sp' */ + + pc = MAKE_PC_FROM_RA(*(unsigned long*)sp - 4, sp); + sp = *(unsigned long *)sp - 3; + } while (count++ < 16); + return 0; +} + +/* + * do_copy_regs() gathers information from 'struct pt_regs' and + * 'current->thread.areg[]' to fill in the xtensa_gregset_t + * structure. + * + * xtensa_gregset_t and 'struct pt_regs' are vastly different formats + * of processor registers. Besides different ordering, + * xtensa_gregset_t contains non-live register information that + * 'struct pt_regs' does not. Exception handling (primarily) uses + * 'struct pt_regs'. Core files and ptrace use xtensa_gregset_t. + * + */ + +void do_copy_regs (xtensa_gregset_t *elfregs, struct pt_regs *regs, + struct task_struct *tsk) +{ + int i, n, wb_offset; + + elfregs->xchal_config_id0 = XCHAL_HW_CONFIGID0; + elfregs->xchal_config_id1 = XCHAL_HW_CONFIGID1; + + __asm__ __volatile__ ("rsr %0, 176\n" : "=a" (i)); + elfregs->cpux = i; + __asm__ __volatile__ ("rsr %0, 208\n" : "=a" (i)); + elfregs->cpuy = i; + + /* Note: PS.EXCM is not set while user task is running; its + * being set in regs->ps is for exception handling convenience. + */ + + elfregs->pc = regs->pc; + elfregs->ps = (regs->ps & ~XCHAL_PS_EXCM_MASK); + elfregs->exccause = regs->exccause; + elfregs->excvaddr = regs->excvaddr; + elfregs->windowbase = regs->windowbase; + elfregs->windowstart = regs->windowstart; + elfregs->lbeg = regs->lbeg; + elfregs->lend = regs->lend; + elfregs->lcount = regs->lcount; + elfregs->sar = regs->sar; + elfregs->syscall = regs->syscall; + + /* Copy register file. + * The layout looks like this: + * + * | a0 ... a15 | Z ... Z | arX ... arY | + * current window unused saved frames + */ + + memset (elfregs->ar, 0, sizeof(elfregs->ar)); + + wb_offset = regs->windowbase * 4; + n = (regs->wmask&1)? 4 : (regs->wmask&2)? 8 : (regs->wmask&4)? 12 : 16; + + for (i = 0; i < n; i++) + elfregs->ar[(wb_offset + i) % XCHAL_NUM_AREGS] = regs->areg[i]; + + n = (regs->wmask >> 4) * 4; + + for (i = XCHAL_NUM_AREGS - n; n > 0; i++, n--) + elfregs->ar[(wb_offset + i) % XCHAL_NUM_AREGS] = regs->areg[i]; +} + +void xtensa_elf_core_copy_regs (xtensa_gregset_t *elfregs, struct pt_regs *regs) +{ + do_copy_regs ((xtensa_gregset_t *)elfregs, regs, current); +} + + +/* The inverse of do_copy_regs(). No error or sanity checking. */ + +void do_restore_regs (xtensa_gregset_t *elfregs, struct pt_regs *regs, + struct task_struct *tsk) +{ + int i, n, wb_offset; + + /* Note: PS.EXCM is not set while user task is running; it + * needs to be set in regs->ps is for exception handling convenience. + */ + + regs->pc = elfregs->pc; + regs->ps = (elfregs->ps | XCHAL_PS_EXCM_MASK); + regs->exccause = elfregs->exccause; + regs->excvaddr = elfregs->excvaddr; + regs->windowbase = elfregs->windowbase; + regs->windowstart = elfregs->windowstart; + regs->lbeg = elfregs->lbeg; + regs->lend = elfregs->lend; + regs->lcount = elfregs->lcount; + regs->sar = elfregs->sar; + regs->syscall = elfregs->syscall; + + /* Clear everything. */ + + memset (regs->areg, 0, sizeof(regs->areg)); + + /* Copy regs from live window frame. */ + + wb_offset = regs->windowbase * 4; + n = (regs->wmask&1)? 4 : (regs->wmask&2)? 8 : (regs->wmask&4)? 12 : 16; + + for (i = 0; i < n; i++) + regs->areg[(wb_offset+i) % XCHAL_NUM_AREGS] = elfregs->ar[i]; + + n = (regs->wmask >> 4) * 4; + + for (i = XCHAL_NUM_AREGS - n; n > 0; i++, n--) + regs->areg[(wb_offset+i) % XCHAL_NUM_AREGS] = elfregs->ar[i]; +} + +/* + * do_save_fpregs() gathers information from 'struct pt_regs' and + * 'current->thread' to fill in the elf_fpregset_t structure. + * + * Core files and ptrace use elf_fpregset_t. + */ + +void do_save_fpregs (elf_fpregset_t *fpregs, struct pt_regs *regs, + struct task_struct *tsk) +{ +#if XCHAL_HAVE_CP + + extern unsigned char _xtensa_reginfo_tables[]; + extern unsigned _xtensa_reginfo_table_size; + int i; + unsigned long flags; + + /* Before dumping coprocessor state from memory, + * ensure any live coprocessor contents for this + * task are first saved to memory: + */ + local_irq_save(flags); + + for (i = 0; i < XCHAL_CP_MAX; i++) { + if (tsk == coprocessor_info[i].owner) { + enable_coprocessor(i); + save_coprocessor_registers( + tsk->thread.cp_save+coprocessor_info[i].offset,i); + disable_coprocessor(i); + } + } + + local_irq_restore(flags); + + /* Now dump coprocessor & extra state: */ + memcpy((unsigned char*)fpregs, + _xtensa_reginfo_tables, _xtensa_reginfo_table_size); + memcpy((unsigned char*)fpregs + _xtensa_reginfo_table_size, + tsk->thread.cp_save, XTENSA_CP_EXTRA_SIZE); +#endif +} + +/* + * The inverse of do_save_fpregs(). + * Copies coprocessor and extra state from fpregs into regs and tsk->thread. + * Returns 0 on success, non-zero if layout doesn't match. + */ + +int do_restore_fpregs (elf_fpregset_t *fpregs, struct pt_regs *regs, + struct task_struct *tsk) +{ +#if XCHAL_HAVE_CP + + extern unsigned char _xtensa_reginfo_tables[]; + extern unsigned _xtensa_reginfo_table_size; + int i; + unsigned long flags; + + /* Make sure save area layouts match. + * FIXME: in the future we could allow restoring from + * a different layout of the same registers, by comparing + * fpregs' table with _xtensa_reginfo_tables and matching + * entries and copying registers one at a time. + * Not too sure yet whether that's very useful. + */ + + if( memcmp((unsigned char*)fpregs, + _xtensa_reginfo_tables, _xtensa_reginfo_table_size) ) { + return -1; + } + + /* Before restoring coprocessor state from memory, + * ensure any live coprocessor contents for this + * task are first invalidated. + */ + + local_irq_save(flags); + + for (i = 0; i < XCHAL_CP_MAX; i++) { + if (tsk == coprocessor_info[i].owner) { + enable_coprocessor(i); + save_coprocessor_registers( + tsk->thread.cp_save+coprocessor_info[i].offset,i); + coprocessor_info[i].owner = 0; + disable_coprocessor(i); + } + } + + local_irq_restore(flags); + + /* Now restore coprocessor & extra state: */ + + memcpy(tsk->thread.cp_save, + (unsigned char*)fpregs + _xtensa_reginfo_table_size, + XTENSA_CP_EXTRA_SIZE); +#endif + return 0; +} +/* + * Fill in the CP structure for a core dump for a particular task. + */ + +int +dump_task_fpu(struct pt_regs *regs, struct task_struct *task, elf_fpregset_t *r) +{ +/* see asm/coprocessor.h for this magic number 16 */ +#if TOTAL_CPEXTRA_SIZE > 16 + do_save_fpregs (r, regs, task); + + /* For now, bit 16 means some extra state may be present: */ +// FIXME!! need to track to return more accurate mask + return 0x10000 | XCHAL_CP_MASK; +#else + return 0; /* no coprocessors active on this processor */ +#endif +} + +/* + * Fill in the CP structure for a core dump. + * This includes any FPU coprocessor. + * Here, we dump all coprocessors, and other ("extra") custom state. + * + * This function is called by elf_core_dump() in fs/binfmt_elf.c + * (in which case 'regs' comes from calls to do_coredump, see signals.c). + */ +int dump_fpu(struct pt_regs *regs, elf_fpregset_t *r) +{ + return dump_task_fpu(regs, current, r); +} diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c new file mode 100644 index 000000000000..2659efdd4e99 --- /dev/null +++ b/arch/xtensa/kernel/ptrace.c @@ -0,0 +1,408 @@ +// TODO some minor issues +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> + * Chris Zankel <chris@zankel.net> + * Scott Foehner<sfoehner@yahoo.com>, + * Kevin Chea + * Marc Gauthier<marc@tensilica.com> <marc@alumni.uwaterloo.ca> + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/security.h> +#include <linux/signal.h> + +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/system.h> +#include <asm/uaccess.h> +#include <asm/ptrace.h> +#include <asm/elf.h> + +#define TEST_KERNEL // verify kernel operations FIXME: remove + + +/* + * Called by kernel/ptrace.c when detaching.. + * + * Make sure single step bits etc are not set. + */ + +void ptrace_disable(struct task_struct *child) +{ + /* Nothing to do.. */ +} + +int sys_ptrace(long request, long pid, long addr, long data) +{ + struct task_struct *child; + int ret = -EPERM; + + lock_kernel(); + +#if 0 + if ((int)request != 1) + printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n", + (int) request, (int) pid, (unsigned long) addr, + (unsigned long) data); +#endif + + if (request == PTRACE_TRACEME) { + + /* Are we already being traced? */ + + if (current->ptrace & PT_PTRACED) + goto out; + + if ((ret = security_ptrace(current->parent, current))) + goto out; + + /* Set the ptrace bit in the process flags. */ + + current->ptrace |= PT_PTRACED; + ret = 0; + goto out; + } + + ret = -ESRCH; + read_lock(&tasklist_lock); + child = find_task_by_pid(pid); + if (child) + get_task_struct(child); + read_unlock(&tasklist_lock); + if (!child) + goto out; + + ret = -EPERM; + if (pid == 1) /* you may not mess with init */ + goto out; + + if (request == PTRACE_ATTACH) { + ret = ptrace_attach(child); + goto out_tsk; + } + + if ((ret = ptrace_check_attach(child, request == PTRACE_KILL)) < 0) + goto out_tsk; + + switch (request) { + case PTRACE_PEEKTEXT: /* read word at location addr. */ + case PTRACE_PEEKDATA: + { + unsigned long tmp; + int copied; + + copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); + ret = -EIO; + if (copied != sizeof(tmp)) + break; + ret = put_user(tmp,(unsigned long *) data); + + goto out; + } + + /* Read the word at location addr in the USER area. */ + + case PTRACE_PEEKUSR: + { + struct pt_regs *regs; + unsigned long tmp; + + regs = xtensa_pt_regs(child); + tmp = 0; /* Default return value. */ + + switch(addr) { + + case REG_AR_BASE ... REG_AR_BASE + XCHAL_NUM_AREGS - 1: + { + int ar = addr - REG_AR_BASE - regs->windowbase * 4; + ar &= (XCHAL_NUM_AREGS - 1); + if (ar < 16 && ar + (regs->wmask >> 4) * 4 >= 0) + tmp = regs->areg[ar]; + else + ret = -EIO; + break; + } + case REG_A_BASE ... REG_A_BASE + 15: + tmp = regs->areg[addr - REG_A_BASE]; + break; + case REG_PC: + tmp = regs->pc; + break; + case REG_PS: + /* Note: PS.EXCM is not set while user task is running; + * its being set in regs is for exception handling + * convenience. */ + tmp = (regs->ps & ~XCHAL_PS_EXCM_MASK); + break; + case REG_WB: + tmp = regs->windowbase; + break; + case REG_WS: + tmp = regs->windowstart; + break; + case REG_LBEG: + tmp = regs->lbeg; + break; + case REG_LEND: + tmp = regs->lend; + break; + case REG_LCOUNT: + tmp = regs->lcount; + break; + case REG_SAR: + tmp = regs->sar; + break; + case REG_DEPC: + tmp = regs->depc; + break; + case REG_EXCCAUSE: + tmp = regs->exccause; + break; + case REG_EXCVADDR: + tmp = regs->excvaddr; + break; + case SYSCALL_NR: + tmp = regs->syscall; + break; + default: + tmp = 0; + ret = -EIO; + goto out; + } + ret = put_user(tmp, (unsigned long *) data); + goto out; + } + + case PTRACE_POKETEXT: /* write the word at location addr. */ + case PTRACE_POKEDATA: + if (access_process_vm(child, addr, &data, sizeof(data), 1) + == sizeof(data)) + break; + ret = -EIO; + goto out; + + case PTRACE_POKEUSR: + { + struct pt_regs *regs; + regs = xtensa_pt_regs(child); + + switch (addr) { + case REG_AR_BASE ... REG_AR_BASE + XCHAL_NUM_AREGS - 1: + { + int ar = addr - REG_AR_BASE - regs->windowbase * 4; + if (ar < 16 && ar + (regs->wmask >> 4) * 4 >= 0) + regs->areg[ar & (XCHAL_NUM_AREGS - 1)] = data; + else + ret = -EIO; + break; + } + case REG_A_BASE ... REG_A_BASE + 15: + regs->areg[addr - REG_A_BASE] = data; + break; + case REG_PC: + regs->pc = data; + break; + case SYSCALL_NR: + regs->syscall = data; + break; +#ifdef TEST_KERNEL + case REG_WB: + regs->windowbase = data; + break; + case REG_WS: + regs->windowstart = data; + break; +#endif + + default: + /* The rest are not allowed. */ + ret = -EIO; + break; + } + break; + } + + /* continue and stop at next (return from) syscall */ + case PTRACE_SYSCALL: + case PTRACE_CONT: /* restart after signal. */ + { + ret = -EIO; + if (!valid_signal(data)) + break; + if (request == PTRACE_SYSCALL) + set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + else + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + child->exit_code = data; + /* Make sure the single step bit is not set. */ + child->ptrace &= ~PT_SINGLESTEP; + wake_up_process(child); + ret = 0; + break; + } + + /* + * make the child exit. Best I can do is send it a sigkill. + * perhaps it should be put in the status that it wants to + * exit. + */ + case PTRACE_KILL: + ret = 0; + if (child->state == EXIT_ZOMBIE) /* already dead */ + break; + child->exit_code = SIGKILL; + child->ptrace &= ~PT_SINGLESTEP; + wake_up_process(child); + break; + + case PTRACE_SINGLESTEP: + ret = -EIO; + if (!valid_signal(data)) + break; + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + child->ptrace |= PT_SINGLESTEP; + child->exit_code = data; + wake_up_process(child); + ret = 0; + break; + + case PTRACE_GETREGS: + { + /* 'data' points to user memory in which to write. + * Mainly due to the non-live register values, we + * reformat the register values into something more + * standard. For convenience, we use the handy + * elf_gregset_t format. */ + + xtensa_gregset_t format; + struct pt_regs *regs = xtensa_pt_regs(child); + + do_copy_regs (&format, regs, child); + + /* Now, copy to user space nice and easy... */ + ret = 0; + if (copy_to_user((void *)data, &format, sizeof(elf_gregset_t))) + ret = -EFAULT; + break; + } + + case PTRACE_SETREGS: + { + /* 'data' points to user memory that contains the new + * values in the elf_gregset_t format. */ + + xtensa_gregset_t format; + struct pt_regs *regs = xtensa_pt_regs(child); + + if (copy_from_user(&format,(void *)data,sizeof(elf_gregset_t))){ + ret = -EFAULT; + break; + } + + /* FIXME: Perhaps we want some sanity checks on + * these user-space values? See ARM version. Are + * debuggers a security concern? */ + + do_restore_regs (&format, regs, child); + + ret = 0; + break; + } + + case PTRACE_GETFPREGS: + { + /* 'data' points to user memory in which to write. + * For convenience, we use the handy + * elf_fpregset_t format. */ + + elf_fpregset_t fpregs; + struct pt_regs *regs = xtensa_pt_regs(child); + + do_save_fpregs (&fpregs, regs, child); + + /* Now, copy to user space nice and easy... */ + ret = 0; + if (copy_to_user((void *)data, &fpregs, sizeof(elf_fpregset_t))) + ret = -EFAULT; + + break; + } + + case PTRACE_SETFPREGS: + { + /* 'data' points to user memory that contains the new + * values in the elf_fpregset_t format. + */ + elf_fpregset_t fpregs; + struct pt_regs *regs = xtensa_pt_regs(child); + + ret = 0; + if (copy_from_user(&fpregs, (void *)data, sizeof(elf_fpregset_t))) { + ret = -EFAULT; + break; + } + + if (do_restore_fpregs (&fpregs, regs, child)) + ret = -EIO; + break; + } + + case PTRACE_GETFPREGSIZE: + /* 'data' points to 'unsigned long' set to the size + * of elf_fpregset_t + */ + ret = put_user(sizeof(elf_fpregset_t), (unsigned long *) data); + break; + + case PTRACE_DETACH: /* detach a process that was attached. */ + ret = ptrace_detach(child, data); + break; + + default: + ret = ptrace_request(child, request, addr, data); + goto out; + } +out_tsk: + put_task_struct(child); +out: + unlock_kernel(); + return ret; +} + +void do_syscall_trace(void) +{ + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; + + if (!(current->ptrace & PT_PTRACED)) + return; + + /* + * The 0x80 provides a way for the tracing parent to distinguish + * between a syscall stop and SIGTRAP delivery + */ + ptrace_notify(SIGTRAP|((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); + + /* + * this isn't the same as continuing with a signal, but it will do + * for normal use. strace only continues with a signal if the + * stopping signal is not SIGTRAP. -brl + */ + if (current->exit_code) { + send_sig(current->exit_code, current, 1); + current->exit_code = 0; + } +} diff --git a/arch/xtensa/kernel/semaphore.c b/arch/xtensa/kernel/semaphore.c new file mode 100644 index 000000000000..d40f4b1b75ac --- /dev/null +++ b/arch/xtensa/kernel/semaphore.c @@ -0,0 +1,226 @@ +/* + * arch/xtensa/kernel/semaphore.c + * + * Generic semaphore code. Buyer beware. Do your own specific changes + * in <asm/semaphore-helper.h> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> + * Chris Zankel <chris@zankel.net> + * Marc Gauthier<marc@tensilica.com, marc@alumni.uwaterloo.ca> + * Kevin Chea + */ + +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/init.h> +#include <asm/semaphore.h> +#include <asm/errno.h> + +/* + * These two _must_ execute atomically wrt each other. + */ + +static __inline__ void wake_one_more(struct semaphore * sem) +{ + atomic_inc((atomic_t *)&sem->sleepers); +} + +static __inline__ int waking_non_zero(struct semaphore *sem) +{ + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&semaphore_wake_lock, flags); + if (sem->sleepers > 0) { + sem->sleepers--; + ret = 1; + } + spin_unlock_irqrestore(&semaphore_wake_lock, flags); + return ret; +} + +/* + * waking_non_zero_interruptible: + * 1 got the lock + * 0 go to sleep + * -EINTR interrupted + * + * We must undo the sem->count down_interruptible() increment while we are + * protected by the spinlock in order to make atomic this atomic_inc() with the + * atomic_read() in wake_one_more(), otherwise we can race. -arca + */ + +static __inline__ int waking_non_zero_interruptible(struct semaphore *sem, + struct task_struct *tsk) +{ + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&semaphore_wake_lock, flags); + if (sem->sleepers > 0) { + sem->sleepers--; + ret = 1; + } else if (signal_pending(tsk)) { + atomic_inc(&sem->count); + ret = -EINTR; + } + spin_unlock_irqrestore(&semaphore_wake_lock, flags); + return ret; +} + +/* + * waking_non_zero_trylock: + * 1 failed to lock + * 0 got the lock + * + * We must undo the sem->count down_trylock() increment while we are + * protected by the spinlock in order to make atomic this atomic_inc() with the + * atomic_read() in wake_one_more(), otherwise we can race. -arca + */ + +static __inline__ int waking_non_zero_trylock(struct semaphore *sem) +{ + unsigned long flags; + int ret = 1; + + spin_lock_irqsave(&semaphore_wake_lock, flags); + if (sem->sleepers <= 0) + atomic_inc(&sem->count); + else { + sem->sleepers--; + ret = 0; + } + spin_unlock_irqrestore(&semaphore_wake_lock, flags); + return ret; +} + +spinlock_t semaphore_wake_lock; + +/* + * Semaphores are implemented using a two-way counter: + * The "count" variable is decremented for each process + * that tries to sleep, while the "waking" variable is + * incremented when the "up()" code goes to wake up waiting + * processes. + * + * Notably, the inline "up()" and "down()" functions can + * efficiently test if they need to do any extra work (up + * needs to do something only if count was negative before + * the increment operation. + * + * waking_non_zero() (from asm/semaphore.h) must execute + * atomically. + * + * When __up() is called, the count was negative before + * incrementing it, and we need to wake up somebody. + * + * This routine adds one to the count of processes that need to + * wake up and exit. ALL waiting processes actually wake up but + * only the one that gets to the "waking" field first will gate + * through and acquire the semaphore. The others will go back + * to sleep. + * + * Note that these functions are only called when there is + * contention on the lock, and as such all this is the + * "non-critical" part of the whole semaphore business. The + * critical part is the inline stuff in <asm/semaphore.h> + * where we want to avoid any extra jumps and calls. + */ + +void __up(struct semaphore *sem) +{ + wake_one_more(sem); + wake_up(&sem->wait); +} + +/* + * Perform the "down" function. Return zero for semaphore acquired, + * return negative for signalled out of the function. + * + * If called from __down, the return is ignored and the wait loop is + * not interruptible. This means that a task waiting on a semaphore + * using "down()" cannot be killed until someone does an "up()" on + * the semaphore. + * + * If called from __down_interruptible, the return value gets checked + * upon return. If the return value is negative then the task continues + * with the negative value in the return register (it can be tested by + * the caller). + * + * Either form may be used in conjunction with "up()". + * + */ + +#define DOWN_VAR \ + struct task_struct *tsk = current; \ + wait_queue_t wait; \ + init_waitqueue_entry(&wait, tsk); + +#define DOWN_HEAD(task_state) \ + \ + \ + tsk->state = (task_state); \ + add_wait_queue(&sem->wait, &wait); \ + \ + /* \ + * Ok, we're set up. sem->count is known to be less than zero \ + * so we must wait. \ + * \ + * We can let go the lock for purposes of waiting. \ + * We re-acquire it after awaking so as to protect \ + * all semaphore operations. \ + * \ + * If "up()" is called before we call waking_non_zero() then \ + * we will catch it right away. If it is called later then \ + * we will have to go through a wakeup cycle to catch it. \ + * \ + * Multiple waiters contend for the semaphore lock to see \ + * who gets to gate through and who has to wait some more. \ + */ \ + for (;;) { + +#define DOWN_TAIL(task_state) \ + tsk->state = (task_state); \ + } \ + tsk->state = TASK_RUNNING; \ + remove_wait_queue(&sem->wait, &wait); + +void __sched __down(struct semaphore * sem) +{ + DOWN_VAR + DOWN_HEAD(TASK_UNINTERRUPTIBLE) + if (waking_non_zero(sem)) + break; + schedule(); + DOWN_TAIL(TASK_UNINTERRUPTIBLE) +} + +int __sched __down_interruptible(struct semaphore * sem) +{ + int ret = 0; + DOWN_VAR + DOWN_HEAD(TASK_INTERRUPTIBLE) + + ret = waking_non_zero_interruptible(sem, tsk); + if (ret) + { + if (ret == 1) + /* ret != 0 only if we get interrupted -arca */ + ret = 0; + break; + } + schedule(); + DOWN_TAIL(TASK_INTERRUPTIBLE) + return ret; +} + +int __down_trylock(struct semaphore * sem) +{ + return waking_non_zero_trylock(sem); +} diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c new file mode 100644 index 000000000000..1f5bf5d624e4 --- /dev/null +++ b/arch/xtensa/kernel/setup.c @@ -0,0 +1,520 @@ +/* + * arch/xtensa/setup.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 Linus Torvalds + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> + * Kevin Chea + * Marc Gauthier<marc@tensilica.com> <marc@alumni.uwaterloo.ca> + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/proc_fs.h> +#include <linux/tty.h> +#include <linux/bootmem.h> +#include <linux/kernel.h> + +#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) +# include <linux/console.h> +#endif + +#ifdef CONFIG_RTC +# include <linux/timex.h> +#endif + +#ifdef CONFIG_PROC_FS +# include <linux/seq_file.h> +#endif + +#include <asm/system.h> +#include <asm/bootparam.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/timex.h> +#include <asm/platform.h> +#include <asm/page.h> +#include <asm/setup.h> + +#include <xtensa/config/system.h> + +#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) +struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16}; +#endif + +#ifdef CONFIG_BLK_DEV_FD +extern struct fd_ops no_fd_ops; +struct fd_ops *fd_ops; +#endif + +#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) +extern struct ide_ops no_ide_ops; +struct ide_ops *ide_ops; +#endif + +extern struct rtc_ops no_rtc_ops; +struct rtc_ops *rtc_ops; + +#ifdef CONFIG_PC_KEYB +extern struct kbd_ops no_kbd_ops; +struct kbd_ops *kbd_ops; +#endif + +#ifdef CONFIG_BLK_DEV_INITRD +extern void *initrd_start; +extern void *initrd_end; +extern void *__initrd_start; +extern void *__initrd_end; +int initrd_is_mapped = 0; +extern int initrd_below_start_ok; +#endif + +unsigned char aux_device_present; +extern unsigned long loops_per_jiffy; + +/* Command line specified as configuration option. */ + +static char command_line[COMMAND_LINE_SIZE]; + +#ifdef CONFIG_CMDLINE_BOOL +static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; +#endif + +sysmem_info_t __initdata sysmem; + +#ifdef CONFIG_BLK_DEV_INITRD +int initrd_is_mapped; +#endif + +extern void init_mmu(void); + +/* + * Boot parameter parsing. + * + * The Xtensa port uses a list of variable-sized tags to pass data to + * the kernel. The first tag must be a BP_TAG_FIRST tag for the list + * to be recognised. The list is terminated with a zero-sized + * BP_TAG_LAST tag. + */ + +typedef struct tagtable { + u32 tag; + int (*parse)(const bp_tag_t*); +} tagtable_t; + +#define __tagtable(tag, fn) static tagtable_t __tagtable_##fn \ + __attribute__((unused, __section__(".taglist"))) = { tag, fn } + +/* parse current tag */ + +static int __init parse_tag_mem(const bp_tag_t *tag) +{ + meminfo_t *mi = (meminfo_t*)(tag->data); + + if (mi->type != MEMORY_TYPE_CONVENTIONAL) + return -1; + + if (sysmem.nr_banks >= SYSMEM_BANKS_MAX) { + printk(KERN_WARNING + "Ignoring memory bank 0x%08lx size %ldKB\n", + (unsigned long)mi->start, + (unsigned long)mi->end - (unsigned long)mi->start); + return -EINVAL; + } + sysmem.bank[sysmem.nr_banks].type = mi->type; + sysmem.bank[sysmem.nr_banks].start = PAGE_ALIGN(mi->start); + sysmem.bank[sysmem.nr_banks].end = mi->end & PAGE_SIZE; + sysmem.nr_banks++; + + return 0; +} + +__tagtable(BP_TAG_MEMORY, parse_tag_mem); + +#ifdef CONFIG_BLK_DEV_INITRD + +static int __init parse_tag_initrd(const bp_tag_t* tag) +{ + meminfo_t* mi; + mi = (meminfo_t*)(tag->data); + initrd_start = (void*)(mi->start); + initrd_end = (void*)(mi->end); + + return 0; +} + +__tagtable(BP_TAG_INITRD, parse_tag_initrd); + +#endif /* CONFIG_BLK_DEV_INITRD */ + +static int __init parse_tag_cmdline(const bp_tag_t* tag) +{ + strncpy(command_line, (char*)(tag->data), COMMAND_LINE_SIZE); + command_line[COMMAND_LINE_SIZE - 1] = '\0'; + return 0; +} + +__tagtable(BP_TAG_COMMAND_LINE, parse_tag_cmdline); + +static int __init parse_bootparam(const bp_tag_t* tag) +{ + extern tagtable_t __tagtable_begin, __tagtable_end; + tagtable_t *t; + + /* Boot parameters must start with a BP_TAG_FIRST tag. */ + + if (tag->id != BP_TAG_FIRST) { + printk(KERN_WARNING "Invalid boot parameters!\n"); + return 0; + } + + tag = (bp_tag_t*)((unsigned long)tag + sizeof(bp_tag_t) + tag->size); + + /* Parse all tags. */ + + while (tag != NULL && tag->id != BP_TAG_LAST) { + for (t = &__tagtable_begin; t < &__tagtable_end; t++) { + if (tag->id == t->tag) { + t->parse(tag); + break; + } + } + if (t == &__tagtable_end) + printk(KERN_WARNING "Ignoring tag " + "0x%08x\n", tag->id); + tag = (bp_tag_t*)((unsigned long)(tag + 1) + tag->size); + } + + return 0; +} + +/* + * Initialize architecture. (Early stage) + */ + +void __init init_arch(bp_tag_t *bp_start) +{ + +#ifdef CONFIG_BLK_DEV_INITRD + initrd_start = &__initrd_start; + initrd_end = &__initrd_end; +#endif + + sysmem.nr_banks = 0; + +#ifdef CONFIG_CMDLINE_BOOL + strcpy(command_line, default_command_line); +#endif + + /* Parse boot parameters */ + + if (bp_start) + parse_bootparam(bp_start); + + if (sysmem.nr_banks == 0) { + sysmem.nr_banks = 1; + sysmem.bank[0].start = PLATFORM_DEFAULT_MEM_START; + sysmem.bank[0].end = PLATFORM_DEFAULT_MEM_START + + PLATFORM_DEFAULT_MEM_SIZE; + } + + /* Early hook for platforms */ + + platform_init(bp_start); + + /* Initialize MMU. */ + + init_mmu(); +} + +/* + * Initialize system. Setup memory and reserve regions. + */ + +extern char _end; +extern char _stext; +extern char _WindowVectors_text_start; +extern char _WindowVectors_text_end; +extern char _DebugInterruptVector_literal_start; +extern char _DebugInterruptVector_text_end; +extern char _KernelExceptionVector_literal_start; +extern char _KernelExceptionVector_text_end; +extern char _UserExceptionVector_literal_start; +extern char _UserExceptionVector_text_end; +extern char _DoubleExceptionVector_literal_start; +extern char _DoubleExceptionVector_text_end; + +void __init setup_arch(char **cmdline_p) +{ + extern int mem_reserve(unsigned long, unsigned long, int); + extern void bootmem_init(void); + + memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE); + saved_command_line[COMMAND_LINE_SIZE-1] = '\0'; + *cmdline_p = command_line; + + /* Reserve some memory regions */ + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start < initrd_end) { + initrd_is_mapped = mem_reserve(__pa(initrd_start), + __pa(initrd_end), 0); + initrd_below_start_ok = 1; + } else { + initrd_start = 0; + } +#endif + + mem_reserve(__pa(&_stext),__pa(&_end), 1); + + mem_reserve(__pa(&_WindowVectors_text_start), + __pa(&_WindowVectors_text_end), 0); + + mem_reserve(__pa(&_DebugInterruptVector_literal_start), + __pa(&_DebugInterruptVector_text_end), 0); + + mem_reserve(__pa(&_KernelExceptionVector_literal_start), + __pa(&_KernelExceptionVector_text_end), 0); + + mem_reserve(__pa(&_UserExceptionVector_literal_start), + __pa(&_UserExceptionVector_text_end), 0); + + mem_reserve(__pa(&_DoubleExceptionVector_literal_start), + __pa(&_DoubleExceptionVector_text_end), 0); + + bootmem_init(); + + platform_setup(cmdline_p); + + + paging_init(); + +#ifdef CONFIG_VT +# if defined(CONFIG_VGA_CONSOLE) + conswitchp = &vga_con; +# elif defined(CONFIG_DUMMY_CONSOLE) + conswitchp = &dummy_con; +# endif +#endif + +#if CONFIG_PCI + platform_pcibios_init(); +#endif +} + +void machine_restart(char * cmd) +{ + platform_restart(); +} + +void machine_halt(void) +{ + platform_halt(); + while (1); +} + +void machine_power_off(void) +{ + platform_power_off(); + while (1); +} +#ifdef CONFIG_PROC_FS + +/* + * Display some core information through /proc/cpuinfo. + */ + +static int +c_show(struct seq_file *f, void *slot) +{ + /* high-level stuff */ + seq_printf(f,"processor\t: 0\n" + "vendor_id\t: Tensilica\n" + "model\t\t: Xtensa " XCHAL_HW_RELEASE_NAME "\n" + "core ID\t\t: " XCHAL_CORE_ID "\n" + "build ID\t: 0x%x\n" + "byte order\t: %s\n" + "cpu MHz\t\t: %lu.%02lu\n" + "bogomips\t: %lu.%02lu\n", + XCHAL_BUILD_UNIQUE_ID, + XCHAL_HAVE_BE ? "big" : "little", + CCOUNT_PER_JIFFY/(1000000/HZ), + (CCOUNT_PER_JIFFY/(10000/HZ)) % 100, + loops_per_jiffy/(500000/HZ), + (loops_per_jiffy/(5000/HZ)) % 100); + + seq_printf(f,"flags\t\t: " +#if XCHAL_HAVE_NMI + "nmi " +#endif +#if XCHAL_HAVE_DEBUG + "debug " +# if XCHAL_HAVE_OCD + "ocd " +# endif +#endif +#if XCHAL_HAVE_DENSITY + "density " +#endif +#if XCHAL_HAVE_BOOLEANS + "boolean " +#endif +#if XCHAL_HAVE_LOOPS + "loop " +#endif +#if XCHAL_HAVE_NSA + "nsa " +#endif +#if XCHAL_HAVE_MINMAX + "minmax " +#endif +#if XCHAL_HAVE_SEXT + "sext " +#endif +#if XCHAL_HAVE_CLAMPS + "clamps " +#endif +#if XCHAL_HAVE_MAC16 + "mac16 " +#endif +#if XCHAL_HAVE_MUL16 + "mul16 " +#endif +#if XCHAL_HAVE_MUL32 + "mul32 " +#endif +#if XCHAL_HAVE_MUL32_HIGH + "mul32h " +#endif +#if XCHAL_HAVE_FP + "fpu " +#endif + "\n"); + + /* Registers. */ + seq_printf(f,"physical aregs\t: %d\n" + "misc regs\t: %d\n" + "ibreak\t\t: %d\n" + "dbreak\t\t: %d\n", + XCHAL_NUM_AREGS, + XCHAL_NUM_MISC_REGS, + XCHAL_NUM_IBREAK, + XCHAL_NUM_DBREAK); + + + /* Interrupt. */ + seq_printf(f,"num ints\t: %d\n" + "ext ints\t: %d\n" + "int levels\t: %d\n" + "timers\t\t: %d\n" + "debug level\t: %d\n", + XCHAL_NUM_INTERRUPTS, + XCHAL_NUM_EXTINTERRUPTS, + XCHAL_NUM_INTLEVELS, + XCHAL_NUM_TIMERS, + XCHAL_DEBUGLEVEL); + + /* Coprocessors */ +#if XCHAL_HAVE_CP + seq_printf(f, "coprocessors\t: %d\n", XCHAL_CP_NUM); +#else + seq_printf(f, "coprocessors\t: none\n"); +#endif + + /* {I,D}{RAM,ROM} and XLMI */ + seq_printf(f,"inst ROMs\t: %d\n" + "inst RAMs\t: %d\n" + "data ROMs\t: %d\n" + "data RAMs\t: %d\n" + "XLMI ports\t: %d\n", + XCHAL_NUM_IROM, + XCHAL_NUM_IRAM, + XCHAL_NUM_DROM, + XCHAL_NUM_DRAM, + XCHAL_NUM_XLMI); + + /* Cache */ + seq_printf(f,"icache line size: %d\n" + "icache ways\t: %d\n" + "icache size\t: %d\n" + "icache flags\t: " +#if XCHAL_ICACHE_LINE_LOCKABLE + "lock" +#endif + "\n" + "dcache line size: %d\n" + "dcache ways\t: %d\n" + "dcache size\t: %d\n" + "dcache flags\t: " +#if XCHAL_DCACHE_IS_WRITEBACK + "writeback" +#endif +#if XCHAL_DCACHE_LINE_LOCKABLE + "lock" +#endif + "\n", + XCHAL_ICACHE_LINESIZE, + XCHAL_ICACHE_WAYS, + XCHAL_ICACHE_SIZE, + XCHAL_DCACHE_LINESIZE, + XCHAL_DCACHE_WAYS, + XCHAL_DCACHE_SIZE); + + /* MMU */ + seq_printf(f,"ASID bits\t: %d\n" + "ASID invalid\t: %d\n" + "ASID kernel\t: %d\n" + "rings\t\t: %d\n" + "itlb ways\t: %d\n" + "itlb AR ways\t: %d\n" + "dtlb ways\t: %d\n" + "dtlb AR ways\t: %d\n", + XCHAL_MMU_ASID_BITS, + XCHAL_MMU_ASID_INVALID, + XCHAL_MMU_ASID_KERNEL, + XCHAL_MMU_RINGS, + XCHAL_ITLB_WAYS, + XCHAL_ITLB_ARF_WAYS, + XCHAL_DTLB_WAYS, + XCHAL_DTLB_ARF_WAYS); + + return 0; +} + +/* + * We show only CPU #0 info. + */ +static void * +c_start(struct seq_file *f, loff_t *pos) +{ + return (void *) ((*pos == 0) ? (void *)1 : NULL); +} + +static void * +c_next(struct seq_file *f, void *v, loff_t *pos) +{ + return NULL; +} + +static void +c_stop(struct seq_file *f, void *v) +{ +} + +struct seq_operations cpuinfo_op = +{ + start: c_start, + next: c_next, + stop: c_stop, + show: c_show +}; + +#endif /* CONFIG_PROC_FS */ + diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c new file mode 100644 index 000000000000..df6e1e17b096 --- /dev/null +++ b/arch/xtensa/kernel/signal.c @@ -0,0 +1,713 @@ +// TODO coprocessor stuff +/* + * linux/arch/xtensa/kernel/signal.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson + * + * Joe Taylor <joe@tensilica.com> + * Chris Zankel <chris@zankel.net> + * + * + * + */ + +#include <xtensa/config/core.h> +#include <xtensa/hal.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/errno.h> +#include <linux/wait.h> +#include <linux/ptrace.h> +#include <linux/unistd.h> +#include <linux/stddef.h> +#include <linux/personality.h> +#include <asm/ucontext.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/cacheflush.h> + +#define DEBUG_SIG 0 + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +asmlinkage long sys_wait4(pid_t pid,unsigned int * stat_addr, int options, + struct rusage * ru); +asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset); + +extern struct task_struct *coproc_owners[]; + + +/* + * Atomically swap in the new signal mask, and wait for a signal. + */ + +int sys_sigsuspend(struct pt_regs *regs) +{ + old_sigset_t mask = (old_sigset_t) regs->areg[3]; + sigset_t saveset; + + mask &= _BLOCKABLE; + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + siginitset(¤t->blocked, mask); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + regs->areg[2] = -EINTR; + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + if (do_signal(regs, &saveset)) + return -EINTR; + } +} + +asmlinkage int +sys_rt_sigsuspend(struct pt_regs *regs) +{ + sigset_t *unewset = (sigset_t *) regs->areg[4]; + size_t sigsetsize = (size_t) regs->areg[3]; + sigset_t saveset, newset; + /* XXX: Don't preclude handling different sized sigset_t's. */ + if (sigsetsize != sizeof(sigset_t)) + return -EINVAL; + + if (copy_from_user(&newset, unewset, sizeof(newset))) + return -EFAULT; + sigdelsetmask(&newset, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + current->blocked = newset; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + regs->areg[2] = -EINTR; + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + if (do_signal(regs, &saveset)) + return -EINTR; + } +} + +asmlinkage int +sys_sigaction(int sig, const struct old_sigaction *act, + struct old_sigaction *oact) +{ + struct k_sigaction new_ka, old_ka; + int ret; + + if (act) { + old_sigset_t mask; + if (verify_area(VERIFY_READ, act, sizeof(*act)) || + __get_user(new_ka.sa.sa_handler, &act->sa_handler) || + __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) + return -EFAULT; + __get_user(new_ka.sa.sa_flags, &act->sa_flags); + __get_user(mask, &act->sa_mask); + siginitset(&new_ka.sa.sa_mask, mask); + } + + ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); + + if (!ret && oact) { + if (verify_area(VERIFY_WRITE, oact, sizeof(*oact)) || + __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || + __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) + return -EFAULT; + __put_user(old_ka.sa.sa_flags, &oact->sa_flags); + __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); + } + + return ret; +} + +asmlinkage int +sys_sigaltstack(struct pt_regs *regs) +{ + const stack_t *uss = (stack_t *) regs->areg[4]; + stack_t *uoss = (stack_t *) regs->areg[3]; + + if (regs->depc > 64) + panic ("Double exception sys_sigreturn\n"); + + + return do_sigaltstack(uss, uoss, regs->areg[1]); +} + + +/* + * Do a signal return; undo the signal stack. + */ + +struct sigframe +{ + struct sigcontext sc; + struct _cpstate cpstate; + unsigned long extramask[_NSIG_WORDS-1]; + unsigned char retcode[6]; + unsigned int reserved[4]; /* Reserved area for chaining */ + unsigned int window[4]; /* Window of 4 registers for initial context */ +}; + +struct rt_sigframe +{ + struct siginfo info; + struct ucontext uc; + struct _cpstate cpstate; + unsigned char retcode[6]; + unsigned int reserved[4]; /* Reserved area for chaining */ + unsigned int window[4]; /* Window of 4 registers for initial context */ +}; + +extern void release_all_cp (struct task_struct *); + + +// FIXME restore_cpextra +static inline int +restore_cpextra (struct _cpstate *buf) +{ +#if 0 + /* The signal handler may have used coprocessors in which + * case they are still enabled. We disable them to force a + * reloading of the original task's CP state by the lazy + * context-switching mechanisms of CP exception handling. + * Also, we essentially discard any coprocessor state that the + * signal handler created. */ + + struct task_struct *tsk = current; + release_all_cp(tsk); + return __copy_from_user(tsk->thread.cpextra, buf, TOTAL_CPEXTRA_SIZE); +#endif + return 0; +} + +/* Note: We don't copy double exception 'tregs', we have to finish double exc. first before we return to signal handler! This dbl.exc.handler might cause another double exception, but I think we are fine as the situation is the same as if we had returned to the signal handerl and got an interrupt immediately... + */ + + +static int +restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc) +{ + struct thread_struct *thread; + unsigned int err = 0; + unsigned long ps; + struct _cpstate *buf; + +#define COPY(x) err |= __get_user(regs->x, &sc->sc_##x) + COPY(pc); + COPY(depc); + COPY(wmask); + COPY(lbeg); + COPY(lend); + COPY(lcount); + COPY(sar); + COPY(windowbase); + COPY(windowstart); +#undef COPY + + /* For PS, restore only PS.CALLINC. + * Assume that all other bits are either the same as for the signal + * handler, or the user mode value doesn't matter (e.g. PS.OWB). + */ + err |= __get_user(ps, &sc->sc_ps); + regs->ps = (regs->ps & ~XCHAL_PS_CALLINC_MASK) + | (ps & XCHAL_PS_CALLINC_MASK); + + /* Additional corruption checks */ + + if ((regs->windowbase >= (XCHAL_NUM_AREGS/4)) + || ((regs->windowstart & ~((1<<(XCHAL_NUM_AREGS/4)) - 1)) != 0) ) + err = 1; + if ((regs->lcount > 0) + && ((regs->lbeg > TASK_SIZE) || (regs->lend > TASK_SIZE)) ) + err = 1; + + /* Restore extended register state. + * See struct thread_struct in processor.h. + */ + thread = ¤t->thread; + + err |= __copy_from_user (regs->areg, sc->sc_areg, XCHAL_NUM_AREGS*4); + err |= __get_user(buf, &sc->sc_cpstate); + if (buf) { + if (verify_area(VERIFY_READ, buf, sizeof(*buf))) + goto badframe; + err |= restore_cpextra(buf); + } + + regs->syscall = -1; /* disable syscall checks */ + return err; + +badframe: + return 1; +} + +static inline void +flush_my_cpstate(struct task_struct *tsk) +{ + unsigned long flags; + local_irq_save(flags); + +#if 0 // FIXME + for (i = 0; i < XCHAL_CP_NUM; i++) { + if (tsk == coproc_owners[i]) { + xthal_validate_cp(i); + xthal_save_cpregs(tsk->thread.cpregs_ptr[i], i); + + /* Invalidate and "disown" the cp to allow + * callers the chance to reset cp state in the + * task_struct. */ + + xthal_invalidate_cp(i); + coproc_owners[i] = 0; + } + } +#endif + local_irq_restore(flags); +} + +/* Return codes: + 0: nothing saved + 1: stuff to save, successful + -1: stuff to save, error happened +*/ +static int +save_cpextra (struct _cpstate *buf) +{ +#if (XCHAL_EXTRA_SA_SIZE == 0) && (XCHAL_CP_NUM == 0) + return 0; +#else + + /* FIXME: If a task has never used a coprocessor, there is + * no need to save and restore anything. Tracking this + * information would allow us to optimize this section. + * Perhaps we can use current->used_math or (current->flags & + * PF_USEDFPU) or define a new field in the thread + * structure. */ + + /* We flush any live, task-owned cp state to the task_struct, + * then copy it all to the sigframe. Then we clear all + * cp/extra state in the task_struct, effectively + * clearing/resetting all cp/extra state for the signal + * handler (cp-exception handling will load these new values + * into the cp/extra registers.) This step is important for + * things like a floating-point cp, where the OS must reset + * the FCR to the default rounding mode. */ + + int err = 0; + struct task_struct *tsk = current; + + flush_my_cpstate(tsk); + /* Note that we just copy everything: 'extra' and 'cp' state together.*/ + err |= __copy_to_user(buf, tsk->thread.cp_save, XTENSA_CP_EXTRA_SIZE); + memset(tsk->thread.cp_save, 0, XTENSA_CP_EXTRA_SIZE); + +#if (XTENSA_CP_EXTRA_SIZE == 0) +#error Sanity check on memset above, cpextra_size should not be zero. +#endif + + return err ? -1 : 1; +#endif +} + +static int +setup_sigcontext(struct sigcontext *sc, struct _cpstate *cpstate, + struct pt_regs *regs, unsigned long mask) +{ + struct thread_struct *thread; + int err = 0; + +//printk("setup_sigcontext\n"); +#define COPY(x) err |= __put_user(regs->x, &sc->sc_##x) + COPY(pc); + COPY(ps); + COPY(depc); + COPY(wmask); + COPY(lbeg); + COPY(lend); + COPY(lcount); + COPY(sar); + COPY(windowbase); + COPY(windowstart); +#undef COPY + + /* Save extended register state. + * See struct thread_struct in processor.h. + */ + thread = ¤t->thread; + err |= __copy_to_user (sc->sc_areg, regs->areg, XCHAL_NUM_AREGS * 4); + err |= save_cpextra(cpstate); + err |= __put_user(err ? NULL : cpstate, &sc->sc_cpstate); + /* non-iBCS2 extensions.. */ + err |= __put_user(mask, &sc->oldmask); + + return err; +} + +asmlinkage int sys_sigreturn(struct pt_regs *regs) +{ + struct sigframe *frame = (struct sigframe *)regs->areg[1]; + sigset_t set; + if (regs->depc > 64) + panic ("Double exception sys_sigreturn\n"); + + if (verify_area(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + + if (__get_user(set.sig[0], &frame->sc.oldmask) + || (_NSIG_WORDS > 1 + && __copy_from_user(&set.sig[1], &frame->extramask, + sizeof(frame->extramask)))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->sc)) + goto badframe; + return regs->areg[2]; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) +{ + struct rt_sigframe *frame = (struct rt_sigframe *)regs->areg[1]; + sigset_t set; + stack_t st; + int ret; + if (regs->depc > 64) + { + printk("!!!!!!! DEPC !!!!!!!\n"); + return 0; + } + + if (verify_area(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) + goto badframe; + ret = regs->areg[2]; + + if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st))) + goto badframe; + /* It is more difficult to avoid calling this function than to + call it and ignore errors. */ + do_sigaltstack(&st, NULL, regs->areg[1]); + + return ret; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +/* + * Set up a signal frame. + */ + +/* + * Determine which stack to use.. + */ +static inline void * +get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) +{ + if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! on_sig_stack(sp)) + sp = current->sas_ss_sp + current->sas_ss_size; + + return (void *)((sp - frame_size) & -16ul); +} + +#define USE_SIGRETURN 0 +#define USE_RT_SIGRETURN 1 + +static int +gen_return_code(unsigned char *codemem, unsigned int use_rt_sigreturn) +{ + unsigned int retcall; + int err = 0; + +#if 0 + /* Ignoring SA_RESTORER for now; it's supposed to be obsolete, + * and the xtensa glibc doesn't use it. + */ + if (ka->sa.sa_flags & SA_RESTORER) { + regs->pr = (unsigned long) ka->sa.sa_restorer; + } else +#endif /* 0 */ + { + +#if (__NR_sigreturn > 255) || (__NR_rt_sigreturn > 255) + +/* The 12-bit immediate is really split up within the 24-bit MOVI + * instruction. As long as the above system call numbers fit within + * 8-bits, the following code works fine. See the Xtensa ISA for + * details. + */ + +#error Generating the MOVI instruction below breaks! +#endif + + retcall = use_rt_sigreturn ? __NR_rt_sigreturn : __NR_sigreturn; + +#ifdef __XTENSA_EB__ /* Big Endian version */ + /* Generate instruction: MOVI a2, retcall */ + err |= __put_user(0x22, &codemem[0]); + err |= __put_user(0x0a, &codemem[1]); + err |= __put_user(retcall, &codemem[2]); + /* Generate instruction: SYSCALL */ + err |= __put_user(0x00, &codemem[3]); + err |= __put_user(0x05, &codemem[4]); + err |= __put_user(0x00, &codemem[5]); + +#elif defined __XTENSA_EL__ /* Little Endian version */ + /* Generate instruction: MOVI a2, retcall */ + err |= __put_user(0x22, &codemem[0]); + err |= __put_user(0xa0, &codemem[1]); + err |= __put_user(retcall, &codemem[2]); + /* Generate instruction: SYSCALL */ + err |= __put_user(0x00, &codemem[3]); + err |= __put_user(0x50, &codemem[4]); + err |= __put_user(0x00, &codemem[5]); +#else +#error Must use compiler for Xtensa processors. +#endif + } + + /* Flush generated code out of the data cache */ + + if (err == 0) + __flush_invalidate_cache_range((unsigned long)codemem, 6UL); + + return err; +} + +static void +set_thread_state(struct pt_regs *regs, void *stack, unsigned char *retaddr, + void *handler, unsigned long arg1, void *arg2, void *arg3) +{ + /* Set up registers for signal handler */ + start_thread(regs, (unsigned long) handler, (unsigned long) stack); + + /* Set up a stack frame for a call4 + * Note: PS.CALLINC is set to one by start_thread + */ + regs->areg[4] = (((unsigned long) retaddr) & 0x3fffffff) | 0x40000000; + regs->areg[6] = arg1; + regs->areg[7] = (unsigned long) arg2; + regs->areg[8] = (unsigned long) arg3; +} + +static void setup_frame(int sig, struct k_sigaction *ka, + sigset_t *set, struct pt_regs *regs) +{ + struct sigframe *frame; + int err = 0; + int signal; + + frame = get_sigframe(ka, regs->areg[1], sizeof(*frame)); + if (regs->depc > 64) + { + printk("!!!!!!! DEPC !!!!!!!\n"); + return; + } + + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + signal = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err |= setup_sigcontext(&frame->sc, &frame->cpstate, regs, set->sig[0]); + + if (_NSIG_WORDS > 1) { + err |= __copy_to_user(frame->extramask, &set->sig[1], + sizeof(frame->extramask)); + } + + /* Create sys_sigreturn syscall in stack frame */ + err |= gen_return_code(frame->retcode, USE_SIGRETURN); + + if (err) + goto give_sigsegv; + + /* Create signal handler execution context. + * Return context not modified until this point. + */ + set_thread_state(regs, frame, frame->retcode, + ka->sa.sa_handler, signal, &frame->sc, NULL); + + /* Set access mode to USER_DS. Nomenclature is outdated, but + * functionality is used in uaccess.h + */ + set_fs(USER_DS); + + +#if DEBUG_SIG + printk("SIG deliver (%s:%d): signal=%d sp=%p pc=%08x\n", + current->comm, current->pid, signal, frame, regs->pc); +#endif + + return; + +give_sigsegv: + if (sig == SIGSEGV) + ka->sa.sa_handler = SIG_DFL; + force_sig(SIGSEGV, current); +} + +static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs) +{ + struct rt_sigframe *frame; + int err = 0; + int signal; + + frame = get_sigframe(ka, regs->areg[1], sizeof(*frame)); + if (regs->depc > 64) + panic ("Double exception sys_sigreturn\n"); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + signal = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err |= copy_siginfo_to_user(&frame->info, info); + + /* Create the ucontext. */ + err |= __put_user(0, &frame->uc.uc_flags); + err |= __put_user(0, &frame->uc.uc_link); + err |= __put_user((void *)current->sas_ss_sp, + &frame->uc.uc_stack.ss_sp); + err |= __put_user(sas_ss_flags(regs->areg[1]), + &frame->uc.uc_stack.ss_flags); + err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= setup_sigcontext(&frame->uc.uc_mcontext, &frame->cpstate, + regs, set->sig[0]); + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + /* Create sys_rt_sigreturn syscall in stack frame */ + err |= gen_return_code(frame->retcode, USE_RT_SIGRETURN); + + if (err) + goto give_sigsegv; + + /* Create signal handler execution context. + * Return context not modified until this point. + */ + set_thread_state(regs, frame, frame->retcode, + ka->sa.sa_handler, signal, &frame->info, &frame->uc); + + /* Set access mode to USER_DS. Nomenclature is outdated, but + * functionality is used in uaccess.h + */ + set_fs(USER_DS); + +#if DEBUG_SIG + printk("SIG rt deliver (%s:%d): signal=%d sp=%p pc=%08x\n", + current->comm, current->pid, signal, frame, regs->pc); +#endif + + return; + +give_sigsegv: + if (sig == SIGSEGV) + ka->sa.sa_handler = SIG_DFL; + force_sig(SIGSEGV, current); +} + + + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + * + * Note that we go through the signals twice: once to check the signals that + * the kernel can handle, and then we build all the user-level signal handling + * stack-frames in one go after that. + */ +int do_signal(struct pt_regs *regs, sigset_t *oldset) +{ + siginfo_t info; + int signr; + struct k_sigaction ka; + + if (!oldset) + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); + + /* Are we from a system call? */ + if (regs->syscall >= 0) { + /* If so, check system call restarting.. */ + switch (regs->areg[2]) { + case ERESTARTNOHAND: + case ERESTART_RESTARTBLOCK: + regs->areg[2] = -EINTR; + break; + + case ERESTARTSYS: + if (!(ka.sa.sa_flags & SA_RESTART)) { + regs->areg[2] = -EINTR; + break; + } + /* fallthrough */ + case ERESTARTNOINTR: + regs->areg[2] = regs->syscall; + regs->pc -= 3; + } + } + + if (signr == 0) + return 0; /* no signals delivered */ + + /* Whee! Actually deliver the signal. */ + + /* Set up the stack frame */ + if (ka.sa.sa_flags & SA_SIGINFO) + setup_rt_frame(signr, &ka, &info, oldset, regs); + else + setup_frame(signr, &ka, oldset, regs); + + if (ka.sa.sa_flags & SA_ONESHOT) + ka.sa.sa_handler = SIG_DFL; + + if (!(ka.sa.sa_flags & SA_NODEFER)) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked, ¤t->blocked, &ka.sa.sa_mask); + sigaddset(¤t->blocked, signr); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } + return 1; +} diff --git a/arch/xtensa/kernel/syscalls.c b/arch/xtensa/kernel/syscalls.c new file mode 100644 index 000000000000..f20c6494c518 --- /dev/null +++ b/arch/xtensa/kernel/syscalls.c @@ -0,0 +1,269 @@ +/* + * arch/xtensa/kernel/syscall.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2000 Silicon Graphics, Inc. + * Copyright (C) 1995 - 2000 by Ralf Baechle + * + * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> + * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca> + * Chris Zankel <chris@zankel.net> + * Kevin Chea + * + */ + +#define DEBUG 0 + +#include <linux/config.h> +#include <linux/linkage.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/mman.h> +#include <linux/sched.h> +#include <linux/file.h> +#include <linux/slab.h> +#include <linux/utsname.h> +#include <linux/unistd.h> +#include <linux/stringify.h> +#include <linux/syscalls.h> +#include <linux/sem.h> +#include <linux/msg.h> +#include <linux/shm.h> +#include <linux/errno.h> +#include <asm/ptrace.h> +#include <asm/signal.h> +#include <asm/uaccess.h> +#include <asm/hardirq.h> +#include <asm/mman.h> +#include <asm/shmparam.h> +#include <asm/page.h> + +extern void do_syscall_trace(void); +typedef int (*syscall_t)(void *a0,...); +extern syscall_t sys_call_table[]; +extern unsigned char sys_narg_table[]; + +/* + * sys_pipe() is the normal C calling standard for creating a pipe. It's not + * the way unix traditional does this, though. + */ + +int sys_pipe(int __user *userfds) +{ + int fd[2]; + int error; + + error = do_pipe(fd); + if (!error) { + if (copy_to_user(userfds, fd, 2 * sizeof(int))) + error = -EFAULT; + } + return error; +} + +/* + * Common code for old and new mmaps. + */ +long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, + unsigned long flags, unsigned long fd, unsigned long pgoff) +{ + int error = -EBADF; + struct file * file = NULL; + + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + if (!(flags & MAP_ANONYMOUS)) { + file = fget(fd); + if (!file) + goto out; + } + + down_write(¤t->mm->mmap_sem); + error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); + up_write(¤t->mm->mmap_sem); + + if (file) + fput(file); +out: + return error; +} + +int sys_clone(struct pt_regs *regs) +{ + unsigned long clone_flags; + unsigned long newsp; + int __user *parent_tidptr, *child_tidptr; + clone_flags = regs->areg[4]; + newsp = regs->areg[3]; + parent_tidptr = (int __user *)regs->areg[5]; + child_tidptr = (int __user *)regs->areg[6]; + if (!newsp) + newsp = regs->areg[1]; + return do_fork(clone_flags,newsp,regs,0,parent_tidptr,child_tidptr); +} + +/* + * sys_execve() executes a new program. + */ + +int sys_execve(struct pt_regs *regs) +{ + int error; + char * filename; + + filename = getname((char *) (long)regs->areg[5]); + error = PTR_ERR(filename); + if (IS_ERR(filename)) + goto out; + error = do_execve(filename, (char **) (long)regs->areg[3], + (char **) (long)regs->areg[4], regs); + putname(filename); + +out: + return error; +} + +int sys_uname(struct old_utsname * name) +{ + if (name && !copy_to_user(name, &system_utsname, sizeof (*name))) + return 0; + return -EFAULT; +} + +/* + * Build the string table for the builtin "poor man's strace". + */ + +#if DEBUG +#define SYSCALL(fun, narg) #fun, +static char *sfnames[] = { +#include "syscalls.h" +}; +#undef SYS +#endif + +void system_call (struct pt_regs *regs) +{ + syscall_t syscall; + unsigned long parm0, parm1, parm2, parm3, parm4, parm5; + int nargs, res; + unsigned int syscallnr; + int ps; + +#if DEBUG + int i; + unsigned long parms[6]; + char *sysname; +#endif + + regs->syscall = regs->areg[2]; + + do_syscall_trace(); + + /* Have to load after syscall_trace because strace + * sometimes changes regs->syscall. + */ + syscallnr = regs->syscall; + + parm0 = parm1 = parm2 = parm3 = parm4 = parm5 = 0; + + /* Restore interrupt level to syscall invoker's. + * If this were in assembly, we wouldn't disable + * interrupts in the first place: + */ + local_save_flags (ps); + local_irq_restore((ps & ~XCHAL_PS_INTLEVEL_MASK) | + (regs->ps & XCHAL_PS_INTLEVEL_MASK) ); + + if (syscallnr > __NR_Linux_syscalls) { + regs->areg[2] = -ENOSYS; + return; + } + + syscall = sys_call_table[syscallnr]; + nargs = sys_narg_table[syscallnr]; + + if (syscall == NULL) { + regs->areg[2] = -ENOSYS; + return; + } + + /* There shouldn't be more than six arguments in the table! */ + + if (nargs > 6) + panic("Internal error - too many syscall arguments (%d)!\n", + nargs); + + /* Linux takes system-call arguments in registers. The ABI + * and Xtensa software conventions require the system-call + * number in a2. If an argument exists in a2, we move it to + * the next available register. Note that for improved + * efficiency, we do NOT shift all parameters down one + * register to maintain the original order. + * + * At best case (zero arguments), we just write the syscall + * number to a2. At worst case (1 to 6 arguments), we move + * the argument in a2 to the next available register, then + * write the syscall number to a2. + * + * For clarity, the following truth table enumerates all + * possibilities. + * + * arguments syscall number arg0, arg1, arg2, arg3, arg4, arg5 + * --------- -------------- ---------------------------------- + * 0 a2 + * 1 a2 a3 + * 2 a2 a4, a3 + * 3 a2 a5, a3, a4 + * 4 a2 a6, a3, a4, a5 + * 5 a2 a7, a3, a4, a5, a6 + * 6 a2 a8, a3, a4, a5, a6, a7 + */ + if (nargs) { + parm0 = regs->areg[nargs+2]; + parm1 = regs->areg[3]; + parm2 = regs->areg[4]; + parm3 = regs->areg[5]; + parm4 = regs->areg[6]; + parm5 = regs->areg[7]; + } else /* nargs == 0 */ + parm0 = (unsigned long) regs; + +#if DEBUG + parms[0] = parm0; + parms[1] = parm1; + parms[2] = parm2; + parms[3] = parm3; + parms[4] = parm4; + parms[5] = parm5; + + sysname = sfnames[syscallnr]; + if (strncmp(sysname, "sys_", 4) == 0) + sysname = sysname + 4; + + printk("\017SYSCALL:I:%x:%d:%s %s(", regs->pc, current->pid, + current->comm, sysname); + for (i = 0; i < nargs; i++) + printk((i>0) ? ", %#lx" : "%#lx", parms[i]); + printk(")\n"); +#endif + + res = syscall((void *)parm0, parm1, parm2, parm3, parm4, parm5); + +#if DEBUG + printk("\017SYSCALL:O:%d:%s %s(",current->pid, current->comm, sysname); + for (i = 0; i < nargs; i++) + printk((i>0) ? ", %#lx" : "%#lx", parms[i]); + if (res < 4096) + printk(") = %d\n", res); + else + printk(") = %#x\n", res); +#endif /* DEBUG */ + + regs->areg[2] = res; + do_syscall_trace(); +} diff --git a/arch/xtensa/kernel/syscalls.h b/arch/xtensa/kernel/syscalls.h new file mode 100644 index 000000000000..216c10a31501 --- /dev/null +++ b/arch/xtensa/kernel/syscalls.h @@ -0,0 +1,247 @@ +/* + * arch/xtensa/kernel/syscalls.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1996, 1997, 1998 by Ralf Baechle + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Changes by Joe Taylor <joe@tensilica.com> + */ + +/* + * This file is being included twice - once to build a list of all + * syscalls and once to build a table of how many arguments each syscall + * accepts. Syscalls that receive a pointer to the saved registers are + * marked as having zero arguments. + * + * The binary compatibility calls are in a separate list. + * + * Entry '0' used to be system_call. It's removed to disable indirect + * system calls for now so user tasks can't recurse. See mips' + * sys_syscall for a comparable example. + */ + +SYSCALL(0, 0) /* 00 */ +SYSCALL(sys_exit, 1) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_read, 3) +SYSCALL(sys_write, 3) +SYSCALL(sys_open, 3) /* 05 */ +SYSCALL(sys_close, 1) +SYSCALL(sys_ni_syscall, 3) +SYSCALL(sys_creat, 2) +SYSCALL(sys_link, 2) +SYSCALL(sys_unlink, 1) /* 10 */ +SYSCALL(sys_execve, 0) +SYSCALL(sys_chdir, 1) +SYSCALL(sys_ni_syscall, 1) +SYSCALL(sys_mknod, 3) +SYSCALL(sys_chmod, 2) /* 15 */ +SYSCALL(sys_lchown, 3) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_newstat, 2) +SYSCALL(sys_lseek, 3) +SYSCALL(sys_getpid, 0) /* 20 */ +SYSCALL(sys_mount, 5) +SYSCALL(sys_ni_syscall, 1) +SYSCALL(sys_setuid, 1) +SYSCALL(sys_getuid, 0) +SYSCALL(sys_ni_syscall, 1) /* 25 */ +SYSCALL(sys_ptrace, 4) +SYSCALL(sys_ni_syscall, 1) +SYSCALL(sys_newfstat, 2) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_utime, 2) /* 30 */ +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_access, 2) +SYSCALL(sys_ni_syscall, 1) +SYSCALL(sys_ni_syscall, 0) /* 35 */ +SYSCALL(sys_sync, 0) +SYSCALL(sys_kill, 2) +SYSCALL(sys_rename, 2) +SYSCALL(sys_mkdir, 2) +SYSCALL(sys_rmdir, 1) /* 40 */ +SYSCALL(sys_dup, 1) +SYSCALL(sys_pipe, 1) +SYSCALL(sys_times, 1) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_brk, 1) /* 45 */ +SYSCALL(sys_setgid, 1) +SYSCALL(sys_getgid, 0) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_geteuid, 0) +SYSCALL(sys_getegid, 0) /* 50 */ +SYSCALL(sys_acct, 1) +SYSCALL(sys_umount, 2) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_ioctl, 3) +SYSCALL(sys_fcntl, 3) /* 55 */ +SYSCALL(sys_ni_syscall, 2) +SYSCALL(sys_setpgid, 2) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_umask, 1) /* 60 */ +SYSCALL(sys_chroot, 1) +SYSCALL(sys_ustat, 2) +SYSCALL(sys_dup2, 2) +SYSCALL(sys_getppid, 0) +SYSCALL(sys_ni_syscall, 0) /* 65 */ +SYSCALL(sys_setsid, 0) +SYSCALL(sys_sigaction, 3) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_ni_syscall, 1) +SYSCALL(sys_setreuid, 2) /* 70 */ +SYSCALL(sys_setregid, 2) +SYSCALL(sys_sigsuspend, 0) +SYSCALL(sys_ni_syscall, 1) +SYSCALL(sys_sethostname, 2) +SYSCALL(sys_setrlimit, 2) /* 75 */ +SYSCALL(sys_getrlimit, 2) +SYSCALL(sys_getrusage, 2) +SYSCALL(sys_gettimeofday, 2) +SYSCALL(sys_settimeofday, 2) +SYSCALL(sys_getgroups, 2) /* 80 */ +SYSCALL(sys_setgroups, 2) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_symlink, 2) +SYSCALL(sys_newlstat, 2) +SYSCALL(sys_readlink, 3) /* 85 */ +SYSCALL(sys_uselib, 1) +SYSCALL(sys_swapon, 2) +SYSCALL(sys_reboot, 3) +SYSCALL(sys_ni_syscall, 3) +SYSCALL(sys_ni_syscall, 6) /* 90 */ +SYSCALL(sys_munmap, 2) +SYSCALL(sys_truncate, 2) +SYSCALL(sys_ftruncate, 2) +SYSCALL(sys_fchmod, 2) +SYSCALL(sys_fchown, 3) /* 95 */ +SYSCALL(sys_getpriority, 2) +SYSCALL(sys_setpriority, 3) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_statfs, 2) +SYSCALL(sys_fstatfs, 2) /* 100 */ +SYSCALL(sys_ni_syscall, 3) +SYSCALL(sys_ni_syscall, 2) +SYSCALL(sys_syslog, 3) +SYSCALL(sys_setitimer, 3) +SYSCALL(sys_getitimer, 2) /* 105 */ +SYSCALL(sys_newstat, 2) +SYSCALL(sys_newlstat, 2) +SYSCALL(sys_newfstat, 2) +SYSCALL(sys_uname, 1) +SYSCALL(sys_ni_syscall, 0) /* 110 */ +SYSCALL(sys_vhangup, 0) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_wait4, 4) +SYSCALL(sys_swapoff, 1) /* 115 */ +SYSCALL(sys_sysinfo, 1) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_fsync, 1) +SYSCALL(sys_sigreturn, 0) +SYSCALL(sys_clone, 0) /* 120 */ +SYSCALL(sys_setdomainname, 2) +SYSCALL(sys_newuname, 1) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_adjtimex, 1) +SYSCALL(sys_mprotect, 3) /* 125 */ +SYSCALL(sys_ni_syscall, 3) +SYSCALL(sys_ni_syscall, 2) +SYSCALL(sys_init_module, 2) +SYSCALL(sys_delete_module, 1) +SYSCALL(sys_ni_syscall, 1) /* 130 */ +SYSCALL(sys_quotactl, 0) +SYSCALL(sys_getpgid, 1) +SYSCALL(sys_fchdir, 1) +SYSCALL(sys_bdflush, 2) +SYSCALL(sys_sysfs, 3) /* 135 */ +SYSCALL(sys_personality, 1) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_setfsuid, 1) +SYSCALL(sys_setfsgid, 1) +SYSCALL(sys_llseek, 5) /* 140 */ +SYSCALL(sys_getdents, 3) +SYSCALL(sys_select, 5) +SYSCALL(sys_flock, 2) +SYSCALL(sys_msync, 3) +SYSCALL(sys_readv, 3) /* 145 */ +SYSCALL(sys_writev, 3) +SYSCALL(sys_ni_syscall, 3) +SYSCALL(sys_ni_syscall, 3) +SYSCALL(sys_ni_syscall, 4) /* handled in fast syscall handler. */ +SYSCALL(sys_ni_syscall, 0) /* 150 */ +SYSCALL(sys_getsid, 1) +SYSCALL(sys_fdatasync, 1) +SYSCALL(sys_sysctl, 1) +SYSCALL(sys_mlock, 2) +SYSCALL(sys_munlock, 2) /* 155 */ +SYSCALL(sys_mlockall, 1) +SYSCALL(sys_munlockall, 0) +SYSCALL(sys_sched_setparam,2) +SYSCALL(sys_sched_getparam,2) +SYSCALL(sys_sched_setscheduler,3) /* 160 */ +SYSCALL(sys_sched_getscheduler,1) +SYSCALL(sys_sched_yield,0) +SYSCALL(sys_sched_get_priority_max,1) +SYSCALL(sys_sched_get_priority_min,1) +SYSCALL(sys_sched_rr_get_interval,2) /* 165 */ +SYSCALL(sys_nanosleep,2) +SYSCALL(sys_mremap,4) +SYSCALL(sys_accept, 3) +SYSCALL(sys_bind, 3) +SYSCALL(sys_connect, 3) /* 170 */ +SYSCALL(sys_getpeername, 3) +SYSCALL(sys_getsockname, 3) +SYSCALL(sys_getsockopt, 5) +SYSCALL(sys_listen, 2) +SYSCALL(sys_recv, 4) /* 175 */ +SYSCALL(sys_recvfrom, 6) +SYSCALL(sys_recvmsg, 3) +SYSCALL(sys_send, 4) +SYSCALL(sys_sendmsg, 3) +SYSCALL(sys_sendto, 6) /* 180 */ +SYSCALL(sys_setsockopt, 5) +SYSCALL(sys_shutdown, 2) +SYSCALL(sys_socket, 3) +SYSCALL(sys_socketpair, 4) +SYSCALL(sys_setresuid, 3) /* 185 */ +SYSCALL(sys_getresuid, 3) +SYSCALL(sys_ni_syscall, 5) +SYSCALL(sys_poll, 3) +SYSCALL(sys_nfsservctl, 3) +SYSCALL(sys_setresgid, 3) /* 190 */ +SYSCALL(sys_getresgid, 3) +SYSCALL(sys_prctl, 5) +SYSCALL(sys_rt_sigreturn, 0) +SYSCALL(sys_rt_sigaction, 4) +SYSCALL(sys_rt_sigprocmask, 4) /* 195 */ +SYSCALL(sys_rt_sigpending, 2) +SYSCALL(sys_rt_sigtimedwait, 4) +SYSCALL(sys_rt_sigqueueinfo, 3) +SYSCALL(sys_rt_sigsuspend, 0) +SYSCALL(sys_pread64, 5) /* 200 */ +SYSCALL(sys_pwrite64, 5) +SYSCALL(sys_chown, 3) +SYSCALL(sys_getcwd, 2) +SYSCALL(sys_capget, 2) +SYSCALL(sys_capset, 2) /* 205 */ +SYSCALL(sys_sigaltstack, 0) +SYSCALL(sys_sendfile, 4) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_ni_syscall, 0) +SYSCALL(sys_mmap, 6) /* 210 */ +SYSCALL(sys_truncate64, 2) +SYSCALL(sys_ftruncate64, 2) +SYSCALL(sys_stat64, 2) +SYSCALL(sys_lstat64, 2) +SYSCALL(sys_fstat64, 2) /* 215 */ +SYSCALL(sys_pivot_root, 2) +SYSCALL(sys_mincore, 3) +SYSCALL(sys_madvise, 3) +SYSCALL(sys_getdents64, 3) +SYSCALL(sys_ni_syscall, 0) /* 220 */ diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c new file mode 100644 index 000000000000..e07287db5a40 --- /dev/null +++ b/arch/xtensa/kernel/time.c @@ -0,0 +1,227 @@ +/* + * arch/xtensa/kernel/time.c + * + * Timer and clock support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/time.h> +#include <linux/timex.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/profile.h> +#include <linux/delay.h> + +#include <asm/timex.h> +#include <asm/platform.h> + + +extern volatile unsigned long wall_jiffies; + +u64 jiffies_64 = INITIAL_JIFFIES; +EXPORT_SYMBOL(jiffies_64); + +spinlock_t rtc_lock = SPIN_LOCK_UNLOCKED; +EXPORT_SYMBOL(rtc_lock); + + +#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT +unsigned long ccount_per_jiffy; /* per 1/HZ */ +unsigned long ccount_nsec; /* nsec per ccount increment */ +#endif + +unsigned int last_ccount_stamp; +static long last_rtc_update = 0; + +/* + * Scheduler clock - returns current tim in nanosec units. + */ + +unsigned long long sched_clock(void) +{ + return (unsigned long long)jiffies * (1000000000 / HZ); +} + +static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs); +static struct irqaction timer_irqaction = { + .handler = timer_interrupt, + .flags = SA_INTERRUPT, + .name = "timer", +}; + +void __init time_init(void) +{ + time_t sec_o, sec_n = 0; + + /* The platform must provide a function to calibrate the processor + * speed for the CALIBRATE. + */ + +#if CONFIG_XTENSA_CALIBRATE_CCOUNT + printk("Calibrating CPU frequency "); + platform_calibrate_ccount(); + printk("%d.%02d MHz\n", (int)ccount_per_jiffy/(1000000/HZ), + (int)(ccount_per_jiffy/(10000/HZ))%100); +#endif + + /* Set time from RTC (if provided) */ + + if (platform_get_rtc_time(&sec_o) == 0) + while (platform_get_rtc_time(&sec_n)) + if (sec_o != sec_n) + break; + + xtime.tv_nsec = 0; + last_rtc_update = xtime.tv_sec = sec_n; + last_ccount_stamp = get_ccount(); + + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); + + /* Initialize the linux timer interrupt. */ + + setup_irq(LINUX_TIMER_INT, &timer_irqaction); + set_linux_timer(get_ccount() + CCOUNT_PER_JIFFY); +} + + +int do_settimeofday(struct timespec *tv) +{ + time_t wtm_sec, sec = tv->tv_sec; + long wtm_nsec, nsec = tv->tv_nsec; + unsigned long ccount; + + if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) + return -EINVAL; + + write_seqlock_irq(&xtime_lock); + + /* This is revolting. We need to set "xtime" correctly. However, the + * value in this location is the value at the most recent update of + * wall time. Discover what correction gettimeofday() would have + * made, and then undo it! + */ + ccount = get_ccount(); + nsec -= (ccount - last_ccount_stamp) * CCOUNT_NSEC; + nsec -= (jiffies - wall_jiffies) * CCOUNT_PER_JIFFY * CCOUNT_NSEC; + + wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); + wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); + + set_normalized_timespec(&xtime, sec, nsec); + set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); + + time_adjust = 0; /* stop active adjtime() */ + time_status |= STA_UNSYNC; + time_maxerror = NTP_PHASE_LIMIT; + time_esterror = NTP_PHASE_LIMIT; + write_sequnlock_irq(&xtime_lock); + return 0; +} + +EXPORT_SYMBOL(do_settimeofday); + + +void do_gettimeofday(struct timeval *tv) +{ + unsigned long flags; + unsigned long sec, usec, delta, lost, seq; + + do { + seq = read_seqbegin_irqsave(&xtime_lock, flags); + + delta = get_ccount() - last_ccount_stamp; + sec = xtime.tv_sec; + usec = (xtime.tv_nsec / NSEC_PER_USEC); + + lost = jiffies - wall_jiffies; + + } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); + + usec += lost * (1000000UL/HZ) + (delta * CCOUNT_NSEC) / NSEC_PER_USEC; + for (; usec >= 1000000; sec++, usec -= 1000000) + ; + + tv->tv_sec = sec; + tv->tv_usec = usec; +} + +EXPORT_SYMBOL(do_gettimeofday); + +/* + * The timer interrupt is called HZ times per second. + */ + +irqreturn_t timer_interrupt (int irq, void *dev_id, struct pt_regs *regs) +{ + + unsigned long next; + + next = get_linux_timer(); + +again: + while ((signed long)(get_ccount() - next) > 0) { + + profile_tick(CPU_PROFILING, regs); +#ifndef CONFIG_SMP + update_process_times(user_mode(regs)); +#endif + + write_seqlock(&xtime_lock); + + last_ccount_stamp = next; + next += CCOUNT_PER_JIFFY; + do_timer (regs); /* Linux handler in kernel/timer.c */ + + if ((time_status & STA_UNSYNC) == 0 && + xtime.tv_sec - last_rtc_update >= 659 && + abs((xtime.tv_nsec/1000)-(1000000-1000000/HZ))<5000000/HZ && + jiffies - wall_jiffies == 1) { + + if (platform_set_rtc_time(xtime.tv_sec+1) == 0) + last_rtc_update = xtime.tv_sec+1; + else + /* Do it again in 60 s */ + last_rtc_update += 60; + } + write_sequnlock(&xtime_lock); + } + + /* NOTE: writing CCOMPAREn clears the interrupt. */ + + set_linux_timer (next); + + /* Make sure we didn't miss any tick... */ + + if ((signed long)(get_ccount() - next) > 0) + goto again; + + /* Allow platform to do something usefull (Wdog). */ + + platform_heartbeat(); + + return IRQ_HANDLED; +} + +#ifndef CONFIG_GENERIC_CALIBRATE_DELAY +void __devinit calibrate_delay(void) +{ + loops_per_jiffy = CCOUNT_PER_JIFFY; + printk("Calibrating delay loop (skipped)... " + "%lu.%02lu BogoMIPS preset\n", + loops_per_jiffy/(1000000/HZ), + (loops_per_jiffy/(10000/HZ)) % 100); +} +#endif + diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c new file mode 100644 index 000000000000..225d64d73f04 --- /dev/null +++ b/arch/xtensa/kernel/traps.c @@ -0,0 +1,498 @@ +/* + * arch/xtensa/kernel/traps.c + * + * Exception handling. + * + * Derived from code with the following copyrights: + * Copyright (C) 1994 - 1999 by Ralf Baechle + * Modified for R3000 by Paul M. Antoine, 1995, 1996 + * Complete output from die() by Ulf Carlsson, 1998 + * Copyright (C) 1999 Silicon Graphics, Inc. + * + * Essentially rewritten for the Xtensa architecture port. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> + * Chris Zankel <chris@zankel.net> + * Marc Gauthier<marc@tensilica.com, marc@alumni.uwaterloo.ca> + * Kevin Chea + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/stringify.h> +#include <linux/kallsyms.h> +#include <linux/delay.h> + +#include <asm/ptrace.h> +#include <asm/timex.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/processor.h> + +#ifdef CONFIG_KGDB +extern int gdb_enter; +extern int return_from_debug_flag; +#endif + +/* + * Machine specific interrupt handlers + */ + +extern void kernel_exception(void); +extern void user_exception(void); + +extern void fast_syscall_kernel(void); +extern void fast_syscall_user(void); +extern void fast_alloca(void); +extern void fast_unaligned(void); +extern void fast_second_level_miss(void); +extern void fast_store_prohibited(void); +extern void fast_coprocessor(void); + +extern void do_illegal_instruction (struct pt_regs*); +extern void do_interrupt (struct pt_regs*); +extern void do_unaligned_user (struct pt_regs*); +extern void do_multihit (struct pt_regs*, unsigned long); +extern void do_page_fault (struct pt_regs*, unsigned long); +extern void do_debug (struct pt_regs*); +extern void system_call (struct pt_regs*); + +/* + * The vector table must be preceded by a save area (which + * implies it must be in RAM, unless one places RAM immediately + * before a ROM and puts the vector at the start of the ROM (!)) + */ + +#define KRNL 0x01 +#define USER 0x02 + +#define COPROCESSOR(x) \ +{ XCHAL_EXCCAUSE_COPROCESSOR ## x ## _DISABLED, USER, fast_coprocessor } + +typedef struct { + int cause; + int fast; + void* handler; +} dispatch_init_table_t; + +dispatch_init_table_t __init dispatch_init_table[] = { + +{ XCHAL_EXCCAUSE_ILLEGAL_INSTRUCTION, 0, do_illegal_instruction}, +{ XCHAL_EXCCAUSE_SYSTEM_CALL, KRNL, fast_syscall_kernel }, +{ XCHAL_EXCCAUSE_SYSTEM_CALL, USER, fast_syscall_user }, +{ XCHAL_EXCCAUSE_SYSTEM_CALL, 0, system_call }, +/* XCHAL_EXCCAUSE_INSTRUCTION_FETCH unhandled */ +/* XCHAL_EXCCAUSE_LOAD_STORE_ERROR unhandled*/ +{ XCHAL_EXCCAUSE_LEVEL1_INTERRUPT, 0, do_interrupt }, +{ XCHAL_EXCCAUSE_ALLOCA, USER|KRNL, fast_alloca }, +/* XCHAL_EXCCAUSE_INTEGER_DIVIDE_BY_ZERO unhandled */ +/* XCHAL_EXCCAUSE_PRIVILEGED unhandled */ +#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION +#ifdef CONFIG_UNALIGNED_USER +{ XCHAL_EXCCAUSE_UNALIGNED, USER, fast_unaligned }, +#else +{ XCHAL_EXCCAUSE_UNALIGNED, 0, do_unaligned_user }, +#endif +{ XCHAL_EXCCAUSE_UNALIGNED, KRNL, fast_unaligned }, +#endif +{ XCHAL_EXCCAUSE_ITLB_MISS, 0, do_page_fault }, +{ XCHAL_EXCCAUSE_ITLB_MISS, USER|KRNL, fast_second_level_miss}, +{ XCHAL_EXCCAUSE_ITLB_MULTIHIT, 0, do_multihit }, +{ XCHAL_EXCCAUSE_ITLB_PRIVILEGE, 0, do_page_fault }, +/* XCHAL_EXCCAUSE_SIZE_RESTRICTION unhandled */ +{ XCHAL_EXCCAUSE_FETCH_CACHE_ATTRIBUTE, 0, do_page_fault }, +{ XCHAL_EXCCAUSE_DTLB_MISS, USER|KRNL, fast_second_level_miss}, +{ XCHAL_EXCCAUSE_DTLB_MISS, 0, do_page_fault }, +{ XCHAL_EXCCAUSE_DTLB_MULTIHIT, 0, do_multihit }, +{ XCHAL_EXCCAUSE_DTLB_PRIVILEGE, 0, do_page_fault }, +/* XCHAL_EXCCAUSE_DTLB_SIZE_RESTRICTION unhandled */ +{ XCHAL_EXCCAUSE_STORE_CACHE_ATTRIBUTE, USER|KRNL, fast_store_prohibited }, +{ XCHAL_EXCCAUSE_STORE_CACHE_ATTRIBUTE, 0, do_page_fault }, +{ XCHAL_EXCCAUSE_LOAD_CACHE_ATTRIBUTE, 0, do_page_fault }, +/* XCCHAL_EXCCAUSE_FLOATING_POINT unhandled */ +#if (XCHAL_CP_MASK & 1) +COPROCESSOR(0), +#endif +#if (XCHAL_CP_MASK & 2) +COPROCESSOR(1), +#endif +#if (XCHAL_CP_MASK & 4) +COPROCESSOR(2), +#endif +#if (XCHAL_CP_MASK & 8) +COPROCESSOR(3), +#endif +#if (XCHAL_CP_MASK & 16) +COPROCESSOR(4), +#endif +#if (XCHAL_CP_MASK & 32) +COPROCESSOR(5), +#endif +#if (XCHAL_CP_MASK & 64) +COPROCESSOR(6), +#endif +#if (XCHAL_CP_MASK & 128) +COPROCESSOR(7), +#endif +{ EXCCAUSE_MAPPED_DEBUG, 0, do_debug }, +{ -1, -1, 0 } + +}; + +/* The exception table <exc_table> serves two functions: + * 1. it contains three dispatch tables (fast_user, fast_kernel, default-c) + * 2. it is a temporary memory buffer for the exception handlers. + */ + +unsigned long exc_table[EXC_TABLE_SIZE/4]; + +void die(const char*, struct pt_regs*, long); + +static inline void +__die_if_kernel(const char *str, struct pt_regs *regs, long err) +{ + if (!user_mode(regs)) + die(str, regs, err); +} + +/* + * Unhandled Exceptions. Kill user task or panic if in kernel space. + */ + +void do_unhandled(struct pt_regs *regs, unsigned long exccause) +{ + __die_if_kernel("Caught unhandled exception - should not happen", + regs, SIGKILL); + + /* If in user mode, send SIGILL signal to current process */ + printk("Caught unhandled exception in '%s' " + "(pid = %d, pc = %#010lx) - should not happen\n" + "\tEXCCAUSE is %ld\n", + current->comm, current->pid, regs->pc, exccause); + force_sig(SIGILL, current); +} + +/* + * Multi-hit exception. This if fatal! + */ + +void do_multihit(struct pt_regs *regs, unsigned long exccause) +{ + die("Caught multihit exception", regs, SIGKILL); +} + +/* + * Level-1 interrupt. + * We currently have no priority encoding. + */ + +unsigned long ignored_level1_interrupts; +extern void do_IRQ(int, struct pt_regs *); + +void do_interrupt (struct pt_regs *regs) +{ + unsigned long intread = get_sr (INTREAD); + unsigned long intenable = get_sr (INTENABLE); + int i, mask; + + /* Handle all interrupts (no priorities). + * (Clear the interrupt before processing, in case it's + * edge-triggered or software-generated) + */ + + for (i=0, mask = 1; i < XCHAL_NUM_INTERRUPTS; i++, mask <<= 1) { + if (mask & (intread & intenable)) { + set_sr (mask, INTCLEAR); + do_IRQ (i,regs); + } + } +} + +/* + * Illegal instruction. Fatal if in kernel space. + */ + +void +do_illegal_instruction(struct pt_regs *regs) +{ + __die_if_kernel("Illegal instruction in kernel", regs, SIGKILL); + + /* If in user mode, send SIGILL signal to current process. */ + + printk("Illegal Instruction in '%s' (pid = %d, pc = %#010lx)\n", + current->comm, current->pid, regs->pc); + force_sig(SIGILL, current); +} + + +/* + * Handle unaligned memory accesses from user space. Kill task. + * + * If CONFIG_UNALIGNED_USER is not set, we don't allow unaligned memory + * accesses causes from user space. + */ + +#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION +#ifndef CONFIG_UNALIGNED_USER +void +do_unaligned_user (struct pt_regs *regs) +{ + siginfo_t info; + + __die_if_kernel("Unhandled unaligned exception in kernel", + regs, SIGKILL); + + current->thread.bad_vaddr = regs->excvaddr; + current->thread.error_code = -3; + printk("Unaligned memory access to %08lx in '%s' " + "(pid = %d, pc = %#010lx)\n", + regs->excvaddr, current->comm, current->pid, regs->pc); + info.si_signo = SIGBUS; + info.si_errno = 0; + info.si_code = BUS_ADRALN; + info.si_addr = (void *) regs->excvaddr; + force_sig_info(SIGSEGV, &info, current); + +} +#endif +#endif + +void +do_debug(struct pt_regs *regs) +{ +#ifdef CONFIG_KGDB + /* If remote debugging is configured AND enabled, we give control to + * kgdb. Otherwise, we fall through, perhaps giving control to the + * native debugger. + */ + + if (gdb_enter) { + extern void gdb_handle_exception(struct pt_regs *); + gdb_handle_exception(regs); + return_from_debug_flag = 1; + return; + } +#endif + + __die_if_kernel("Breakpoint in kernel", regs, SIGKILL); + + /* If in user mode, send SIGTRAP signal to current process */ + + force_sig(SIGTRAP, current); +} + + +/* + * Initialize dispatch tables. + * + * The exception vectors are stored compressed the __init section in the + * dispatch_init_table. This function initializes the following three tables + * from that compressed table: + * - fast user first dispatch table for user exceptions + * - fast kernel first dispatch table for kernel exceptions + * - default C-handler C-handler called by the default fast handler. + * + * See vectors.S for more details. + */ + +#define set_handler(idx,handler) (exc_table[idx] = (unsigned long) (handler)) + +void trap_init(void) +{ + int i; + + /* Setup default vectors. */ + + for(i = 0; i < 64; i++) { + set_handler(EXC_TABLE_FAST_USER/4 + i, user_exception); + set_handler(EXC_TABLE_FAST_KERNEL/4 + i, kernel_exception); + set_handler(EXC_TABLE_DEFAULT/4 + i, do_unhandled); + } + + /* Setup specific handlers. */ + + for(i = 0; dispatch_init_table[i].cause >= 0; i++) { + + int fast = dispatch_init_table[i].fast; + int cause = dispatch_init_table[i].cause; + void *handler = dispatch_init_table[i].handler; + + if (fast == 0) + set_handler (EXC_TABLE_DEFAULT/4 + cause, handler); + if (fast && fast & USER) + set_handler (EXC_TABLE_FAST_USER/4 + cause, handler); + if (fast && fast & KRNL) + set_handler (EXC_TABLE_FAST_KERNEL/4 + cause, handler); + } + + /* Initialize EXCSAVE_1 to hold the address of the exception table. */ + + i = (unsigned long)exc_table; + __asm__ __volatile__("wsr %0, "__stringify(EXCSAVE_1)"\n" : : "a" (i)); +} + +/* + * This function dumps the current valid window frame and other base registers. + */ + +void show_regs(struct pt_regs * regs) +{ + int i, wmask; + + wmask = regs->wmask & ~1; + + for (i = 0; i < 32; i++) { + if (wmask & (1 << (i / 4))) + break; + if ((i % 8) == 0) + printk ("\n" KERN_INFO "a%02d: ", i); + printk("%08lx ", regs->areg[i]); + } + printk("\n"); + + printk("pc: %08lx, ps: %08lx, depc: %08lx, excvaddr: %08lx\n", + regs->pc, regs->ps, regs->depc, regs->excvaddr); + printk("lbeg: %08lx, lend: %08lx lcount: %08lx, sar: %08lx\n", + regs->lbeg, regs->lend, regs->lcount, regs->sar); + if (user_mode(regs)) + printk("wb: %08lx, ws: %08lx, wmask: %08lx, syscall: %ld\n", + regs->windowbase, regs->windowstart, regs->wmask, + regs->syscall); +} + +void show_trace(struct task_struct *task, unsigned long *sp) +{ + unsigned long a0, a1, pc; + unsigned long sp_start, sp_end; + + a1 = (unsigned long)sp; + + if (a1 == 0) + __asm__ __volatile__ ("mov %0, a1\n" : "=a"(a1)); + + + sp_start = a1 & ~(THREAD_SIZE-1); + sp_end = sp_start + THREAD_SIZE; + + printk("Call Trace:"); +#ifdef CONFIG_KALLSYMS + printk("\n"); +#endif + spill_registers(); + + while (a1 > sp_start && a1 < sp_end) { + sp = (unsigned long*)a1; + + a0 = *(sp - 4); + a1 = *(sp - 3); + + if (a1 <= (unsigned long) sp) + break; + + pc = MAKE_PC_FROM_RA(a0, a1); + + if (kernel_text_address(pc)) { + printk(" [<%08lx>] ", pc); + print_symbol("%s\n", pc); + } + } + printk("\n"); +} + +/* + * This routine abuses get_user()/put_user() to reference pointers + * with at least a bit of error checking ... + */ + +static int kstack_depth_to_print = 24; + +void show_stack(struct task_struct *task, unsigned long *sp) +{ + int i = 0; + unsigned long *stack; + + if (sp == 0) + __asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp)); + + stack = sp; + + printk("\nStack: "); + + for (i = 0; i < kstack_depth_to_print; i++) { + if (kstack_end(sp)) + break; + if (i && ((i % 8) == 0)) + printk("\n "); + printk("%08lx ", *sp++); + } + printk("\n"); + show_trace(task, stack); +} + +void dump_stack(void) +{ + show_stack(current, NULL); +} + +EXPORT_SYMBOL(dump_stack); + + +void show_code(unsigned int *pc) +{ + long i; + + printk("\nCode:"); + + for(i = -3 ; i < 6 ; i++) { + unsigned long insn; + if (__get_user(insn, pc + i)) { + printk(" (Bad address in pc)\n"); + break; + } + printk("%c%08lx%c",(i?' ':'<'),insn,(i?' ':'>')); + } +} + +spinlock_t die_lock = SPIN_LOCK_UNLOCKED; + +void die(const char * str, struct pt_regs * regs, long err) +{ + static int die_counter; + int nl = 0; + + console_verbose(); + spin_lock_irq(&die_lock); + + printk("%s: sig: %ld [#%d]\n", str, err, ++die_counter); +#ifdef CONFIG_PREEMPT + printk("PREEMPT "); + nl = 1; +#endif + if (nl) + printk("\n"); + show_regs(regs); + if (!user_mode(regs)) + show_stack(NULL, (unsigned long*)regs->areg[1]); + + spin_unlock_irq(&die_lock); + + if (in_interrupt()) + panic("Fatal exception in interrupt"); + + if (panic_on_oops) { + printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n"); + ssleep(5); + panic("Fatal exception"); + } + do_exit(err); +} + + diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S new file mode 100644 index 000000000000..81808f0c6742 --- /dev/null +++ b/arch/xtensa/kernel/vectors.S @@ -0,0 +1,464 @@ +/* + * arch/xtensa/kernel/vectors.S + * + * This file contains all exception vectors (user, kernel, and double), + * as well as the window vectors (overflow and underflow), and the debug + * vector. These are the primary vectors executed by the processor if an + * exception occurs. + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2005 Tensilica, Inc. + * + * Chris Zankel <chris@zankel.net> + * + */ + +/* + * We use a two-level table approach. The user and kernel exception vectors + * use a first-level dispatch table to dispatch the exception to a registered + * fast handler or the default handler, if no fast handler was registered. + * The default handler sets up a C-stack and dispatches the exception to a + * registerd C handler in the second-level dispatch table. + * + * Fast handler entry condition: + * + * a0: trashed, original value saved on stack (PT_AREG0) + * a1: a1 + * a2: new stack pointer, original value in depc + * a3: dispatch table + * depc: a2, original value saved on stack (PT_DEPC) + * excsave_1: a3 + * + * The value for PT_DEPC saved to stack also functions as a boolean to + * indicate that the exception is either a double or a regular exception: + * + * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception + * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception + * + * Note: Neither the kernel nor the user exception handler generate literals. + * + */ + +#include <linux/linkage.h> +#include <asm/ptrace.h> +#include <asm/ptrace.h> +#include <asm/current.h> +#include <asm/offsets.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/page.h> +#include <asm/thread_info.h> +#include <asm/processor.h> + + +/* + * User exception vector. (Exceptions with PS.UM == 1, PS.EXCM == 0) + * + * We get here when an exception occurred while we were in userland. + * We switch to the kernel stack and jump to the first level handler + * associated to the exception cause. + * + * Note: the saved kernel stack pointer (EXC_TABLE_KSTK) is already + * decremented by PT_USER_SIZE. + */ + + .section .UserExceptionVector.text, "ax" + +ENTRY(_UserExceptionVector) + + xsr a3, EXCSAVE_1 # save a3 and get dispatch table + wsr a2, DEPC # save a2 + l32i a2, a3, EXC_TABLE_KSTK # load kernel stack to a2 + s32i a0, a2, PT_AREG0 # save a0 to ESF + rsr a0, EXCCAUSE # retrieve exception cause + s32i a0, a2, PT_DEPC # mark it as a regular exception + addx4 a0, a0, a3 # find entry in table + l32i a0, a0, EXC_TABLE_FAST_USER # load handler + jx a0 + +/* + * Kernel exception vector. (Exceptions with PS.UM == 0, PS.EXCM == 0) + * + * We get this exception when we were already in kernel space. + * We decrement the current stack pointer (kernel) by PT_SIZE and + * jump to the first-level handler associated with the exception cause. + * + * Note: we need to preserve space for the spill region. + */ + + .section .KernelExceptionVector.text, "ax" + +ENTRY(_KernelExceptionVector) + + xsr a3, EXCSAVE_1 # save a3, and get dispatch table + wsr a2, DEPC # save a2 + addi a2, a1, -16-PT_SIZE # adjust stack pointer + s32i a0, a2, PT_AREG0 # save a0 to ESF + rsr a0, EXCCAUSE # retrieve exception cause + s32i a0, a2, PT_DEPC # mark it as a regular exception + addx4 a0, a0, a3 # find entry in table + l32i a0, a0, EXC_TABLE_FAST_KERNEL # load handler address + jx a0 + + +/* + * Double exception vector (Exceptions with PS.EXCM == 1) + * We get this exception when another exception occurs while were are + * already in an exception, such as window overflow/underflow exception, + * or 'expected' exceptions, for example memory exception when we were trying + * to read data from an invalid address in user space. + * + * Note that this vector is never invoked for level-1 interrupts, because such + * interrupts are disabled (masked) when PS.EXCM is set. + * + * We decode the exception and take the appropriate action. However, the + * double exception vector is much more careful, because a lot more error + * cases go through the double exception vector than through the user and + * kernel exception vectors. + * + * Occasionally, the kernel expects a double exception to occur. This usually + * happens when accessing user-space memory with the user's permissions + * (l32e/s32e instructions). The kernel state, though, is not always suitable + * for immediate transfer of control to handle_double, where "normal" exception + * processing occurs. Also in kernel mode, TLB misses can occur if accessing + * vmalloc memory, possibly requiring repair in a double exception handler. + * + * The variable at TABLE_FIXUP offset from the pointer in EXCSAVE_1 doubles as + * a boolean variable and a pointer to a fixup routine. If the variable + * EXC_TABLE_FIXUP is non-zero, this handler jumps to that address. A value of + * zero indicates to use the default kernel/user exception handler. + * There is only one exception, when the value is identical to the exc_table + * label, the kernel is in trouble. This mechanism is used to protect critical + * sections, mainly when the handler writes to the stack to assert the stack + * pointer is valid. Once the fixup/default handler leaves that area, the + * EXC_TABLE_FIXUP variable is reset to the fixup handler or zero. + * + * Procedures wishing to use this mechanism should set EXC_TABLE_FIXUP to the + * nonzero address of a fixup routine before it could cause a double exception + * and reset it before it returns. + * + * Some other things to take care of when a fast exception handler doesn't + * specify a particular fixup handler but wants to use the default handlers: + * + * - The original stack pointer (in a1) must not be modified. The fast + * exception handler should only use a2 as the stack pointer. + * + * - If the fast handler manipulates the stack pointer (in a2), it has to + * register a valid fixup handler and cannot use the default handlers. + * + * - The handler can use any other generic register from a3 to a15, but it + * must save the content of these registers to stack (PT_AREG3...PT_AREGx) + * + * - These registers must be saved before a double exception can occur. + * + * - If we ever implement handling signals while in double exceptions, the + * number of registers a fast handler has saved (excluding a0 and a1) must + * be written to PT_AREG1. (1 if only a3 is used, 2 for a3 and a4, etc. ) + * + * The fixup handlers are special handlers: + * + * - Fixup entry conditions differ from regular exceptions: + * + * a0: DEPC + * a1: a1 + * a2: trashed, original value in EXC_TABLE_DOUBLE_A2 + * a3: exctable + * depc: a0 + * excsave_1: a3 + * + * - When the kernel enters the fixup handler, it still assumes it is in a + * critical section, so EXC_TABLE_FIXUP variable is set to exc_table. + * The fixup handler, therefore, has to re-register itself as the fixup + * handler before it returns from the double exception. + * + * - Fixup handler can share the same exception frame with the fast handler. + * The kernel stack pointer is not changed when entering the fixup handler. + * + * - Fixup handlers can jump to the default kernel and user exception + * handlers. Before it jumps, though, it has to setup a exception frame + * on stack. Because the default handler resets the register fixup handler + * the fixup handler must make sure that the default handler returns to + * it instead of the exception address, so it can re-register itself as + * the fixup handler. + * + * In case of a critical condition where the kernel cannot recover, we jump + * to unrecoverable_exception with the following entry conditions. + * All registers a0...a15 are unchanged from the last exception, except: + * + * a0: last address before we jumped to the unrecoverable_exception. + * excsave_1: a0 + * + * + * See the handle_alloca_user and spill_registers routines for example clients. + * + * FIXME: Note: we currently don't allow signal handling coming from a double + * exception, so the item markt with (*) is not required. + */ + + .section .DoubleExceptionVector.text, "ax" + .begin literal_prefix .DoubleExceptionVector + +ENTRY(_DoubleExceptionVector) + + /* Deliberately destroy excsave (don't assume it's value was valid). */ + + wsr a3, EXCSAVE_1 # save a3 + + /* Check for kernel double exception (usually fatal). */ + + rsr a3, PS + _bbci.l a3, PS_UM_SHIFT, .Lksp + + /* Check if we are currently handling a window exception. */ + /* Note: We don't need to indicate that we enter a critical section. */ + + xsr a0, DEPC # get DEPC, save a0 + + movi a3, XCHAL_WINDOW_VECTORS_VADDR + _bltu a0, a3, .Lfixup + addi a3, a3, XSHAL_WINDOW_VECTORS_SIZE + _bgeu a0, a3, .Lfixup + + /* Window overflow/underflow exception. Get stack pointer. */ + + mov a3, a2 + movi a2, exc_table + l32i a2, a2, EXC_TABLE_KSTK + + /* Check for overflow/underflow exception, jump if overflow. */ + + _bbci.l a0, 6, .Lovfl + + /* a0: depc, a1: a1, a2: kstk, a3: a2, depc: a0, excsave: a3 */ + + /* Restart window underflow exception. + * We return to the instruction in user space that caused the window + * underflow exception. Therefore, we change window base to the value + * before we entered the window underflow exception and prepare the + * registers to return as if we were coming from a regular exception + * by changing depc (in a0). + * Note: We can trash the current window frame (a0...a3) and depc! + */ + + wsr a2, DEPC # save stack pointer temporarily + rsr a0, PS + extui a0, a0, XCHAL_PS_OWB_SHIFT, XCHAL_PS_OWB_BITS + wsr a0, WINDOWBASE + rsync + + /* We are now in the previous window frame. Save registers again. */ + + xsr a2, DEPC # save a2 and get stack pointer + s32i a0, a2, PT_AREG0 + + wsr a3, EXCSAVE_1 # save a3 + movi a3, exc_table + + rsr a0, EXCCAUSE + s32i a0, a2, PT_DEPC # mark it as a regular exception + addx4 a0, a0, a3 + l32i a0, a0, EXC_TABLE_FAST_USER + jx a0 + +.Lfixup:/* Check for a fixup handler or if we were in a critical section. */ + + /* a0: depc, a1: a1, a2: a2, a3: trashed, depc: a0, excsave1: a3 */ + + movi a3, exc_table + s32i a2, a3, EXC_TABLE_DOUBLE_SAVE # temporary variable + + /* Enter critical section. */ + + l32i a2, a3, EXC_TABLE_FIXUP + s32i a3, a3, EXC_TABLE_FIXUP + beq a2, a3, .Lunrecoverable_fixup # critical! + beqz a2, .Ldflt # no handler was registered + + /* a0: depc, a1: a1, a2: trash, a3: exctable, depc: a0, excsave: a3 */ + + jx a2 + +.Ldflt: /* Get stack pointer. */ + + l32i a3, a3, EXC_TABLE_DOUBLE_SAVE + addi a2, a3, -PT_USER_SIZE + +.Lovfl: /* Jump to default handlers. */ + + /* a0: depc, a1: a1, a2: kstk, a3: a2, depc: a0, excsave: a3 */ + + xsr a3, DEPC + s32i a0, a2, PT_DEPC + s32i a3, a2, PT_AREG0 + + /* a0: avail, a1: a1, a2: kstk, a3: avail, depc: a2, excsave: a3 */ + + movi a3, exc_table + rsr a0, EXCCAUSE + addx4 a0, a0, a3 + l32i a0, a0, EXC_TABLE_FAST_USER + jx a0 + + /* + * We only allow the ITLB miss exception if we are in kernel space. + * All other exceptions are unexpected and thus unrecoverable! + */ + + .extern fast_second_level_miss_double_kernel + +.Lksp: /* a0: a0, a1: a1, a2: a2, a3: trashed, depc: depc, excsave: a3 */ + + rsr a3, EXCCAUSE + beqi a3, XCHAL_EXCCAUSE_ITLB_MISS, 1f + addi a3, a3, -XCHAL_EXCCAUSE_DTLB_MISS + bnez a3, .Lunrecoverable +1: movi a3, fast_second_level_miss_double_kernel + jx a3 + + /* Critical! We can't handle this situation. PANIC! */ + + .extern unrecoverable_exception + +.Lunrecoverable_fixup: + l32i a2, a3, EXC_TABLE_DOUBLE_SAVE + xsr a0, DEPC + +.Lunrecoverable: + rsr a3, EXCSAVE_1 + wsr a0, EXCSAVE_1 + movi a0, unrecoverable_exception + callx0 a0 + + .end literal_prefix + + +/* + * Debug interrupt vector + * + * There is not much space here, so simply jump to another handler. + * EXCSAVE[DEBUGLEVEL] has been set to that handler. + */ + + .section .DebugInterruptVector.text, "ax" + +ENTRY(_DebugInterruptVector) + xsr a0, EXCSAVE + XCHAL_DEBUGLEVEL + jx a0 + + + +/* Window overflow and underflow handlers. + * The handlers must be 64 bytes apart, first starting with the underflow + * handlers underflow-4 to underflow-12, then the overflow handlers + * overflow-4 to overflow-12. + * + * Note: We rerun the underflow handlers if we hit an exception, so + * we try to access any page that would cause a page fault early. + */ + + .section .WindowVectors.text, "ax" + + +/* 4-Register Window Overflow Vector (Handler) */ + + .align 64 +.global _WindowOverflow4 +_WindowOverflow4: + s32e a0, a5, -16 + s32e a1, a5, -12 + s32e a2, a5, -8 + s32e a3, a5, -4 + rfwo + + +/* 4-Register Window Underflow Vector (Handler) */ + + .align 64 +.global _WindowUnderflow4 +_WindowUnderflow4: + l32e a0, a5, -16 + l32e a1, a5, -12 + l32e a2, a5, -8 + l32e a3, a5, -4 + rfwu + + +/* 8-Register Window Overflow Vector (Handler) */ + + .align 64 +.global _WindowOverflow8 +_WindowOverflow8: + s32e a0, a9, -16 + l32e a0, a1, -12 + s32e a2, a9, -8 + s32e a1, a9, -12 + s32e a3, a9, -4 + s32e a4, a0, -32 + s32e a5, a0, -28 + s32e a6, a0, -24 + s32e a7, a0, -20 + rfwo + +/* 8-Register Window Underflow Vector (Handler) */ + + .align 64 +.global _WindowUnderflow8 +_WindowUnderflow8: + l32e a1, a9, -12 + l32e a0, a9, -16 + l32e a7, a1, -12 + l32e a2, a9, -8 + l32e a4, a7, -32 + l32e a3, a9, -4 + l32e a5, a7, -28 + l32e a6, a7, -24 + l32e a7, a7, -20 + rfwu + + +/* 12-Register Window Overflow Vector (Handler) */ + + .align 64 +.global _WindowOverflow12 +_WindowOverflow12: + s32e a0, a13, -16 + l32e a0, a1, -12 + s32e a1, a13, -12 + s32e a2, a13, -8 + s32e a3, a13, -4 + s32e a4, a0, -48 + s32e a5, a0, -44 + s32e a6, a0, -40 + s32e a7, a0, -36 + s32e a8, a0, -32 + s32e a9, a0, -28 + s32e a10, a0, -24 + s32e a11, a0, -20 + rfwo + +/* 12-Register Window Underflow Vector (Handler) */ + + .align 64 +.global _WindowUnderflow12 +_WindowUnderflow12: + l32e a1, a13, -12 + l32e a0, a13, -16 + l32e a11, a1, -12 + l32e a2, a13, -8 + l32e a4, a11, -48 + l32e a8, a11, -32 + l32e a3, a13, -4 + l32e a5, a11, -44 + l32e a6, a11, -40 + l32e a7, a11, -36 + l32e a9, a11, -28 + l32e a10, a11, -24 + l32e a11, a11, -20 + rfwu + + .text + + diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S new file mode 100644 index 000000000000..5ed71dfc8110 --- /dev/null +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -0,0 +1,341 @@ +/* + * arch/xtensa/kernel/vmlinux.lds.S + * + * Xtensa linker script + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca> + * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> + */ + +#include <asm-generic/vmlinux.lds.h> + +#include <linux/config.h> +#define _NOCLANGUAGE +#include <xtensa/config/core.h> +#include <xtensa/config/system.h> +OUTPUT_ARCH(xtensa) +ENTRY(_start) + +#if XCHAL_MEMORY_ORDER == XTHAL_BIGENDIAN +jiffies = jiffies_64 + 4; +#else +jiffies = jiffies_64; +#endif + +#define KERNELOFFSET 0x1000 + +/* Note: In the following macros, it would be nice to specify only the + vector name and section kind and construct "sym" and "section" using + CPP concatenation, but that does not work reliably. Concatenating a + string with "." produces an invalid token. CPP will not print a + warning because it thinks this is an assembly file, but it leaves + them as multiple tokens and there may or may not be whitespace + between them. */ + +/* Macro for a relocation entry */ + +#define RELOCATE_ENTRY(sym, section) \ + LONG(sym ## _start); \ + LONG(sym ## _end); \ + LONG(LOADADDR(section)) + +/* Macro to define a section for a vector. + * + * Use of the MIN function catches the types of errors illustrated in + * the following example: + * + * Assume the section .DoubleExceptionVector.literal is completely + * full. Then a programmer adds code to .DoubleExceptionVector.text + * that produces another literal. The final literal position will + * overlay onto the first word of the adjacent code section + * .DoubleExceptionVector.text. (In practice, the literals will + * overwrite the code, and the first few instructions will be + * garbage.) + */ + +#define SECTION_VECTOR(sym, section, addr, max_prevsec_size, prevsec) \ + section addr : AT((MIN(LOADADDR(prevsec) + max_prevsec_size, \ + LOADADDR(prevsec) + SIZEOF(prevsec)) + 3) & ~ 3) \ + { \ + . = ALIGN(4); \ + sym ## _start = ABSOLUTE(.); \ + *(section) \ + sym ## _end = ABSOLUTE(.); \ + } + +/* + * Mapping of input sections to output sections when linking. + */ + +SECTIONS +{ + . = XCHAL_KSEG_CACHED_VADDR + KERNELOFFSET; + /* .text section */ + + _text = .; + _stext = .; + _ftext = .; + + .text : + { + /* The .head.text section must be the first section! */ + *(.head.text) + *(.literal .text) + *(.srom.text) + VMLINUX_SYMBOL(__sched_text_start) = .; + *(.sched.literal .sched.text) + VMLINUX_SYMBOL(__sched_text_end) = .; + VMLINUX_SYMBOL(__lock_text_start) = .; + *(.spinlock.literal .spinlock.text) + VMLINUX_SYMBOL(__lock_text_end) = .; + + } + _etext = .; + + . = ALIGN(16); + + RODATA + + /* Relocation table */ + + . = ALIGN(16); + __boot_reloc_table_start = ABSOLUTE(.); + + __relocate : { + + RELOCATE_ENTRY(_WindowVectors_text, + .WindowVectors.text); +#if 0 + RELOCATE_ENTRY(_KernelExceptionVector_literal, + .KernelExceptionVector.literal); +#endif + RELOCATE_ENTRY(_KernelExceptionVector_text, + .KernelExceptionVector.text); +#if 0 + RELOCATE_ENTRY(_UserExceptionVector_literal, + .UserExceptionVector.literal); +#endif + RELOCATE_ENTRY(_UserExceptionVector_text, + .UserExceptionVector.text); + RELOCATE_ENTRY(_DoubleExceptionVector_literal, + .DoubleExceptionVector.literal); + RELOCATE_ENTRY(_DoubleExceptionVector_text, + .DoubleExceptionVector.text); + } + __boot_reloc_table_end = ABSOLUTE(.) ; + + .fixup : { *(.fixup) } + + . = ALIGN(16); + + __ex_table : { + __start___ex_table = .; + *(__ex_table) + __stop___ex_table = .; + } + + /* Data section */ + + . = ALIGN(XCHAL_ICACHE_LINESIZE); + _fdata = .; + .data : + { + *(.data) CONSTRUCTORS + . = ALIGN(XCHAL_ICACHE_LINESIZE); + *(.data.cacheline_aligned) + } + + _edata = .; + + /* The initial task */ + . = ALIGN(8192); + .data.init_task : { *(.data.init_task) } + + /* Initialization code and data: */ + + . = ALIGN(1<<XCHAL_MMU_MIN_PTE_PAGE_SIZE); + __init_begin = .; + .init.text : { + _sinittext = .; + *(.init.literal) *(.init.text) + _einittext = .; + } + + .init.data : + { + *(.init.data) + . = ALIGN(0x4); + __tagtable_begin = .; + *(.taglist) + __tagtable_end = .; + } + + . = ALIGN(XCHAL_ICACHE_LINESIZE); + + __setup_start = .; + .init.setup : { *(.init.setup) } + __setup_end = .; + + __initcall_start = .; + .initcall.init : { + *(.initcall1.init) + *(.initcall2.init) + *(.initcall3.init) + *(.initcall4.init) + *(.initcall5.init) + *(.initcall6.init) + *(.initcall7.init) + } + __initcall_end = .; + + __con_initcall_start = .; + .con_initcall.init : { *(.con_initcall.init) } + __con_initcall_end = .; + + SECURITY_INIT + + . = ALIGN(4); + + __start___ftr_fixup = .; + __ftr_fixup : { *(__ftr_fixup) } + __stop___ftr_fixup = .; + + . = ALIGN(32); + __per_cpu_start = .; + .data.percpu : { *(.data.percpu) } + __per_cpu_end = .; + + . = ALIGN(4096); + __initramfs_start =.; + .init.ramfs : { *(.init.ramfs) } + __initramfs_end = .; + + /* We need this dummy segment here */ + + . = ALIGN(4); + .dummy : { LONG(0) } + + /* The vectors are relocated to the real position at startup time */ + + SECTION_VECTOR (_WindowVectors_text, + .WindowVectors.text, + XCHAL_WINDOW_VECTORS_VADDR, 4, + .dummy) + SECTION_VECTOR (_DebugInterruptVector_literal, + .DebugInterruptVector.literal, + XCHAL_INTLEVEL_VECTOR_VADDR(XCHAL_DEBUGLEVEL) - 4, + SIZEOF(.WindowVectors.text), + .WindowVectors.text) + SECTION_VECTOR (_DebugInterruptVector_text, + .DebugInterruptVector.text, + XCHAL_INTLEVEL_VECTOR_VADDR(XCHAL_DEBUGLEVEL), + 4, + .DebugInterruptVector.literal) + SECTION_VECTOR (_KernelExceptionVector_literal, + .KernelExceptionVector.literal, + XCHAL_KERNELEXC_VECTOR_VADDR - 4, + SIZEOF(.DebugInterruptVector.text), + .DebugInterruptVector.text) + SECTION_VECTOR (_KernelExceptionVector_text, + .KernelExceptionVector.text, + XCHAL_KERNELEXC_VECTOR_VADDR, + 4, + .KernelExceptionVector.literal) + SECTION_VECTOR (_UserExceptionVector_literal, + .UserExceptionVector.literal, + XCHAL_USEREXC_VECTOR_VADDR - 4, + SIZEOF(.KernelExceptionVector.text), + .KernelExceptionVector.text) + SECTION_VECTOR (_UserExceptionVector_text, + .UserExceptionVector.text, + XCHAL_USEREXC_VECTOR_VADDR, + 4, + .UserExceptionVector.literal) + SECTION_VECTOR (_DoubleExceptionVector_literal, + .DoubleExceptionVector.literal, + XCHAL_DOUBLEEXC_VECTOR_VADDR - 16, + SIZEOF(.UserExceptionVector.text), + .UserExceptionVector.text) + SECTION_VECTOR (_DoubleExceptionVector_text, + .DoubleExceptionVector.text, + XCHAL_DOUBLEEXC_VECTOR_VADDR, + 32, + .DoubleExceptionVector.literal) + + . = (LOADADDR( .DoubleExceptionVector.text ) + SIZEOF( .DoubleExceptionVector.text ) + 3) & ~ 3; + . = ALIGN(1<<XCHAL_MMU_MIN_PTE_PAGE_SIZE); + + __init_end = .; + + . = ALIGN(8192); + + /* BSS section */ + _bss_start = .; + .sbss : { *(.sbss) *(.scommon) } + .bss : { *(COMMON) *(.bss) } + _bss_end = .; + _end = .; + + /* only used by the boot loader */ + + . = ALIGN(0x10); + .bootstrap : { *(.bootstrap.literal .bootstrap.text .bootstrap.data) } + + . = ALIGN(0x1000); + __initrd_start = .; + .initrd : { *(.initrd) } + __initrd_end = .; + + .ResetVector.text XCHAL_RESET_VECTOR_VADDR : + { + *(.ResetVector.text) + } + + + /* Sections to be discarded */ + /DISCARD/ : + { + *(.text.exit) + *(.text.exit.literal) + *(.data.exit) + *(.exitcall.exit) + } + + + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + + .xt.insn 0 : + { + *(.xt.insn) + *(.gnu.linkonce.x*) + } + + .xt.lit 0 : + { + *(.xt.lit) + *(.gnu.linkonce.p*) + } +} diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c new file mode 100644 index 000000000000..efae56a51475 --- /dev/null +++ b/arch/xtensa/kernel/xtensa_ksyms.c @@ -0,0 +1,123 @@ +/* + * arch/xtensa/kernel/xtensa_ksyms.c + * + * Export Xtensa-specific functions for loadable modules. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Joe Taylor <joe@tensilica.com> + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <asm/irq.h> +#include <linux/in6.h> +#include <linux/pci.h> +#include <linux/ide.h> + +#include <asm/uaccess.h> +#include <asm/checksum.h> +#include <asm/dma.h> +#include <asm/io.h> +#include <asm/page.h> +#include <asm/pgalloc.h> +#include <asm/semaphore.h> +#ifdef CONFIG_BLK_DEV_FD +#include <asm/floppy.h> +#endif +#ifdef CONFIG_NET +#include <net/checksum.h> +#endif /* CONFIG_NET */ + + +/* + * String functions + */ +EXPORT_SYMBOL(memcmp); +EXPORT_SYMBOL(memset); +EXPORT_SYMBOL(memcpy); +EXPORT_SYMBOL(memmove); +EXPORT_SYMBOL(memchr); +EXPORT_SYMBOL(strcat); +EXPORT_SYMBOL(strchr); +EXPORT_SYMBOL(strlen); +EXPORT_SYMBOL(strpbrk); +EXPORT_SYMBOL(strncat); +EXPORT_SYMBOL(strnlen); +EXPORT_SYMBOL(strrchr); +EXPORT_SYMBOL(strstr); + +EXPORT_SYMBOL(enable_irq); +EXPORT_SYMBOL(disable_irq); +EXPORT_SYMBOL(kernel_thread); + +/* + * gcc internal math functions + */ +extern long long __ashrdi3(long long, int); +extern long long __ashldi3(long long, int); +extern long long __lshrdi3(long long, int); +extern int __divsi3(int, int); +extern int __modsi3(int, int); +extern long long __muldi3(long long, long long); +extern int __mulsi3(int, int); +extern unsigned int __udivsi3(unsigned int, unsigned int); +extern unsigned int __umodsi3(unsigned int, unsigned int); +extern unsigned long long __umoddi3(unsigned long long, unsigned long long); +extern unsigned long long __udivdi3(unsigned long long, unsigned long long); + +EXPORT_SYMBOL(__ashldi3); +EXPORT_SYMBOL(__ashrdi3); +EXPORT_SYMBOL(__lshrdi3); +EXPORT_SYMBOL(__divsi3); +EXPORT_SYMBOL(__modsi3); +EXPORT_SYMBOL(__muldi3); +EXPORT_SYMBOL(__mulsi3); +EXPORT_SYMBOL(__udivsi3); +EXPORT_SYMBOL(__umodsi3); +EXPORT_SYMBOL(__udivdi3); +EXPORT_SYMBOL(__umoddi3); + +/* + * Semaphore operations + */ +EXPORT_SYMBOL(__down); +EXPORT_SYMBOL(__down_interruptible); +EXPORT_SYMBOL(__down_trylock); +EXPORT_SYMBOL(__up); + +#ifdef CONFIG_NET +/* + * Networking support + */ +EXPORT_SYMBOL(csum_partial_copy_generic); +#endif /* CONFIG_NET */ + +/* + * Architecture-specific symbols + */ +EXPORT_SYMBOL(__xtensa_copy_user); + +/* + * Kernel hacking ... + */ + +#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) +// FIXME EXPORT_SYMBOL(screen_info); +#endif + +EXPORT_SYMBOL(get_wchan); + +EXPORT_SYMBOL(outsb); +EXPORT_SYMBOL(outsw); +EXPORT_SYMBOL(outsl); +EXPORT_SYMBOL(insb); +EXPORT_SYMBOL(insw); +EXPORT_SYMBOL(insl); diff --git a/arch/xtensa/lib/Makefile b/arch/xtensa/lib/Makefile new file mode 100644 index 000000000000..ed935b58e8a4 --- /dev/null +++ b/arch/xtensa/lib/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for Xtensa-specific library files. +# + +lib-y += memcopy.o memset.o checksum.o strcasecmp.o \ + usercopy.o strncpy_user.o strnlen_user.o +lib-$(CONFIG_PCI) += pci-auto.o diff --git a/arch/xtensa/lib/checksum.S b/arch/xtensa/lib/checksum.S new file mode 100644 index 000000000000..e2d64dfd530c --- /dev/null +++ b/arch/xtensa/lib/checksum.S @@ -0,0 +1,410 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * IP/TCP/UDP checksumming routines + * + * Xtensa version: Copyright (C) 2001 Tensilica, Inc. by Kevin Chea + * Optimized by Joe Taylor + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/errno.h> +#include <linux/linkage.h> +#define _ASMLANGUAGE +#include <xtensa/config/core.h> + +/* + * computes a partial checksum, e.g. for TCP/UDP fragments + */ + +/* + * unsigned int csum_partial(const unsigned char *buf, int len, + * unsigned int sum); + * a2 = buf + * a3 = len + * a4 = sum + * + * This function assumes 2- or 4-byte alignment. Other alignments will fail! + */ + +/* ONES_ADD converts twos-complement math to ones-complement. */ +#define ONES_ADD(sum, val) \ + add sum, sum, val ; \ + bgeu sum, val, 99f ; \ + addi sum, sum, 1 ; \ +99: ; + +.text +ENTRY(csum_partial) + /* + * Experiments with Ethernet and SLIP connections show that buf + * is aligned on either a 2-byte or 4-byte boundary. + */ + entry sp, 32 + extui a5, a2, 0, 2 + bnez a5, 8f /* branch if 2-byte aligned */ + /* Fall-through on common case, 4-byte alignment */ +1: + srli a5, a3, 5 /* 32-byte chunks */ +#if XCHAL_HAVE_LOOPS + loopgtz a5, 2f +#else + beqz a5, 2f + slli a5, a5, 5 + add a5, a5, a2 /* a5 = end of last 32-byte chunk */ +.Loop1: +#endif + l32i a6, a2, 0 + l32i a7, a2, 4 + ONES_ADD(a4, a6) + ONES_ADD(a4, a7) + l32i a6, a2, 8 + l32i a7, a2, 12 + ONES_ADD(a4, a6) + ONES_ADD(a4, a7) + l32i a6, a2, 16 + l32i a7, a2, 20 + ONES_ADD(a4, a6) + ONES_ADD(a4, a7) + l32i a6, a2, 24 + l32i a7, a2, 28 + ONES_ADD(a4, a6) + ONES_ADD(a4, a7) + addi a2, a2, 4*8 +#if !XCHAL_HAVE_LOOPS + blt a2, a5, .Loop1 +#endif +2: + extui a5, a3, 2, 3 /* remaining 4-byte chunks */ +#if XCHAL_HAVE_LOOPS + loopgtz a5, 3f +#else + beqz a5, 3f + slli a5, a5, 2 + add a5, a5, a2 /* a5 = end of last 4-byte chunk */ +.Loop2: +#endif + l32i a6, a2, 0 + ONES_ADD(a4, a6) + addi a2, a2, 4 +#if !XCHAL_HAVE_LOOPS + blt a2, a5, .Loop2 +#endif +3: + _bbci.l a3, 1, 5f /* remaining 2-byte chunk */ + l16ui a6, a2, 0 + ONES_ADD(a4, a6) + addi a2, a2, 2 +5: + _bbci.l a3, 0, 7f /* remaining 1-byte chunk */ +6: l8ui a6, a2, 0 +#ifdef __XTENSA_EB__ + slli a6, a6, 8 /* load byte into bits 8..15 */ +#endif + ONES_ADD(a4, a6) +7: + mov a2, a4 + retw + + /* uncommon case, buf is 2-byte aligned */ +8: + beqz a3, 7b /* branch if len == 0 */ + beqi a3, 1, 6b /* branch if len == 1 */ + + extui a5, a2, 0, 1 + bnez a5, 8f /* branch if 1-byte aligned */ + + l16ui a6, a2, 0 /* common case, len >= 2 */ + ONES_ADD(a4, a6) + addi a2, a2, 2 /* adjust buf */ + addi a3, a3, -2 /* adjust len */ + j 1b /* now buf is 4-byte aligned */ + + /* case: odd-byte aligned, len > 1 + * This case is dog slow, so don't give us an odd address. + * (I don't think this ever happens, but just in case.) + */ +8: + srli a5, a3, 2 /* 4-byte chunks */ +#if XCHAL_HAVE_LOOPS + loopgtz a5, 2f +#else + beqz a5, 2f + slli a5, a5, 2 + add a5, a5, a2 /* a5 = end of last 4-byte chunk */ +.Loop3: +#endif + l8ui a6, a2, 0 /* bits 24..31 */ + l16ui a7, a2, 1 /* bits 8..23 */ + l8ui a8, a2, 3 /* bits 0.. 8 */ +#ifdef __XTENSA_EB__ + slli a6, a6, 24 +#else + slli a8, a8, 24 +#endif + slli a7, a7, 8 + or a7, a7, a6 + or a7, a7, a8 + ONES_ADD(a4, a7) + addi a2, a2, 4 +#if !XCHAL_HAVE_LOOPS + blt a2, a5, .Loop3 +#endif +2: + _bbci.l a3, 1, 3f /* remaining 2-byte chunk, still odd addr */ + l8ui a6, a2, 0 + l8ui a7, a2, 1 +#ifdef __XTENSA_EB__ + slli a6, a6, 8 +#else + slli a7, a7, 8 +#endif + or a7, a7, a6 + ONES_ADD(a4, a7) + addi a2, a2, 2 +3: + j 5b /* branch to handle the remaining byte */ + + + +/* + * Copy from ds while checksumming, otherwise like csum_partial + * + * The macros SRC and DST specify the type of access for the instruction. + * thus we can call a custom exception handler for each access type. + */ + +#define SRC(y...) \ + 9999: y; \ + .section __ex_table, "a"; \ + .long 9999b, 6001f ; \ + .previous + +#define DST(y...) \ + 9999: y; \ + .section __ex_table, "a"; \ + .long 9999b, 6002f ; \ + .previous + +/* +unsigned int csum_partial_copy_generic (const char *src, char *dst, int len, + int sum, int *src_err_ptr, int *dst_err_ptr) + a2 = src + a3 = dst + a4 = len + a5 = sum + a6 = src_err_ptr + a7 = dst_err_ptr + a8 = temp + a9 = temp + a10 = temp + a11 = original len for exception handling + a12 = original dst for exception handling + + This function is optimized for 4-byte aligned addresses. Other + alignments work, but not nearly as efficiently. + */ + +ENTRY(csum_partial_copy_generic) + entry sp, 32 + mov a12, a3 + mov a11, a4 + or a10, a2, a3 + + /* We optimize the following alignment tests for the 4-byte + aligned case. Two bbsi.l instructions might seem more optimal + (commented out below). However, both labels 5: and 3: are out + of the imm8 range, so the assembler relaxes them into + equivalent bbci.l, j combinations, which is actually + slower. */ + + extui a9, a10, 0, 2 + beqz a9, 1f /* branch if both are 4-byte aligned */ + bbsi.l a10, 0, 5f /* branch if one address is odd */ + j 3f /* one address is 2-byte aligned */ + +/* _bbsi.l a10, 0, 5f */ /* branch if odd address */ +/* _bbsi.l a10, 1, 3f */ /* branch if 2-byte-aligned address */ + +1: + /* src and dst are both 4-byte aligned */ + srli a10, a4, 5 /* 32-byte chunks */ +#if XCHAL_HAVE_LOOPS + loopgtz a10, 2f +#else + beqz a10, 2f + slli a10, a10, 5 + add a10, a10, a2 /* a10 = end of last 32-byte src chunk */ +.Loop5: +#endif +SRC( l32i a9, a2, 0 ) +SRC( l32i a8, a2, 4 ) +DST( s32i a9, a3, 0 ) +DST( s32i a8, a3, 4 ) + ONES_ADD(a5, a9) + ONES_ADD(a5, a8) +SRC( l32i a9, a2, 8 ) +SRC( l32i a8, a2, 12 ) +DST( s32i a9, a3, 8 ) +DST( s32i a8, a3, 12 ) + ONES_ADD(a5, a9) + ONES_ADD(a5, a8) +SRC( l32i a9, a2, 16 ) +SRC( l32i a8, a2, 20 ) +DST( s32i a9, a3, 16 ) +DST( s32i a8, a3, 20 ) + ONES_ADD(a5, a9) + ONES_ADD(a5, a8) +SRC( l32i a9, a2, 24 ) +SRC( l32i a8, a2, 28 ) +DST( s32i a9, a3, 24 ) +DST( s32i a8, a3, 28 ) + ONES_ADD(a5, a9) + ONES_ADD(a5, a8) + addi a2, a2, 32 + addi a3, a3, 32 +#if !XCHAL_HAVE_LOOPS + blt a2, a10, .Loop5 +#endif +2: + extui a10, a4, 2, 3 /* remaining 4-byte chunks */ + extui a4, a4, 0, 2 /* reset len for general-case, 2-byte chunks */ +#if XCHAL_HAVE_LOOPS + loopgtz a10, 3f +#else + beqz a10, 3f + slli a10, a10, 2 + add a10, a10, a2 /* a10 = end of last 4-byte src chunk */ +.Loop6: +#endif +SRC( l32i a9, a2, 0 ) +DST( s32i a9, a3, 0 ) + ONES_ADD(a5, a9) + addi a2, a2, 4 + addi a3, a3, 4 +#if !XCHAL_HAVE_LOOPS + blt a2, a10, .Loop6 +#endif +3: + /* + Control comes to here in two cases: (1) It may fall through + to here from the 4-byte alignment case to process, at most, + one 2-byte chunk. (2) It branches to here from above if + either src or dst is 2-byte aligned, and we process all bytes + here, except for perhaps a trailing odd byte. It's + inefficient, so align your addresses to 4-byte boundaries. + + a2 = src + a3 = dst + a4 = len + a5 = sum + */ + srli a10, a4, 1 /* 2-byte chunks */ +#if XCHAL_HAVE_LOOPS + loopgtz a10, 4f +#else + beqz a10, 4f + slli a10, a10, 1 + add a10, a10, a2 /* a10 = end of last 2-byte src chunk */ +.Loop7: +#endif +SRC( l16ui a9, a2, 0 ) +DST( s16i a9, a3, 0 ) + ONES_ADD(a5, a9) + addi a2, a2, 2 + addi a3, a3, 2 +#if !XCHAL_HAVE_LOOPS + blt a2, a10, .Loop7 +#endif +4: + /* This section processes a possible trailing odd byte. */ + _bbci.l a4, 0, 8f /* 1-byte chunk */ +SRC( l8ui a9, a2, 0 ) +DST( s8i a9, a3, 0 ) +#ifdef __XTENSA_EB__ + slli a9, a9, 8 /* shift byte to bits 8..15 */ +#endif + ONES_ADD(a5, a9) +8: + mov a2, a5 + retw + +5: + /* Control branch to here when either src or dst is odd. We + process all bytes using 8-bit accesses. Grossly inefficient, + so don't feed us an odd address. */ + + srli a10, a4, 1 /* handle in pairs for 16-bit csum */ +#if XCHAL_HAVE_LOOPS + loopgtz a10, 6f +#else + beqz a10, 6f + slli a10, a10, 1 + add a10, a10, a2 /* a10 = end of last odd-aligned, 2-byte src chunk */ +.Loop8: +#endif +SRC( l8ui a9, a2, 0 ) +SRC( l8ui a8, a2, 1 ) +DST( s8i a9, a3, 0 ) +DST( s8i a8, a3, 1 ) +#ifdef __XTENSA_EB__ + slli a9, a9, 8 /* combine into a single 16-bit value */ +#else /* for checksum computation */ + slli a8, a8, 8 +#endif + or a9, a9, a8 + ONES_ADD(a5, a9) + addi a2, a2, 2 + addi a3, a3, 2 +#if !XCHAL_HAVE_LOOPS + blt a2, a10, .Loop8 +#endif +6: + j 4b /* process the possible trailing odd byte */ + + +# Exception handler: +.section .fixup, "ax" +/* + a6 = src_err_ptr + a7 = dst_err_ptr + a11 = original len for exception handling + a12 = original dst for exception handling +*/ + +6001: + _movi a2, -EFAULT + s32i a2, a6, 0 /* src_err_ptr */ + + # clear the complete destination - computing the rest + # is too much work + movi a2, 0 +#if XCHAL_HAVE_LOOPS + loopgtz a11, 2f +#else + beqz a11, 2f + add a11, a11, a12 /* a11 = ending address */ +.Leloop: +#endif + s8i a2, a12, 0 + addi a12, a12, 1 +#if !XCHAL_HAVE_LOOPS + blt a12, a11, .Leloop +#endif +2: + retw + +6002: + movi a2, -EFAULT + s32i a2, a7, 0 /* dst_err_ptr */ + movi a2, 0 + retw + +.previous + diff --git a/arch/xtensa/lib/memcopy.S b/arch/xtensa/lib/memcopy.S new file mode 100644 index 000000000000..e8f6d7eb7222 --- /dev/null +++ b/arch/xtensa/lib/memcopy.S @@ -0,0 +1,315 @@ +/* + * arch/xtensa/lib/hal/memcopy.S -- Core HAL library functions + * xthal_memcpy and xthal_bcopy + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002 - 2005 Tensilica Inc. + */ + +#include <xtensa/coreasm.h> + + .macro src_b r, w0, w1 +#ifdef __XTENSA_EB__ + src \r, \w0, \w1 +#else + src \r, \w1, \w0 +#endif + .endm + + .macro ssa8 r +#ifdef __XTENSA_EB__ + ssa8b \r +#else + ssa8l \r +#endif + .endm + + +/* + * void *memcpy(void *dst, const void *src, size_t len); + * void *memmove(void *dst, const void *src, size_t len); + * void *bcopy(const void *src, void *dst, size_t len); + * + * This function is intended to do the same thing as the standard + * library function memcpy() (or bcopy()) for most cases. + * However, where the source and/or destination references + * an instruction RAM or ROM or a data RAM or ROM, that + * source and/or destination will always be accessed with + * 32-bit load and store instructions (as required for these + * types of devices). + * + * !!!!!!! XTFIXME: + * !!!!!!! Handling of IRAM/IROM has not yet + * !!!!!!! been implemented. + * + * The bcopy version is provided here to avoid the overhead + * of an extra call, for callers that require this convention. + * + * The (general case) algorithm is as follows: + * If destination is unaligned, align it by conditionally + * copying 1 and 2 bytes. + * If source is aligned, + * do 16 bytes with a loop, and then finish up with + * 8, 4, 2, and 1 byte copies conditional on the length; + * else (if source is unaligned), + * do the same, but use SRC to align the source data. + * This code tries to use fall-through branches for the common + * case of aligned source and destination and multiple + * of 4 (or 8) length. + * + * Register use: + * a0/ return address + * a1/ stack pointer + * a2/ return value + * a3/ src + * a4/ length + * a5/ dst + * a6/ tmp + * a7/ tmp + * a8/ tmp + * a9/ tmp + * a10/ tmp + * a11/ tmp + */ + + .text + .align 4 + .global bcopy + .type bcopy,@function +bcopy: + entry sp, 16 # minimal stack frame + # a2=src, a3=dst, a4=len + mov a5, a3 # copy dst so that a2 is return value + mov a3, a2 + mov a2, a5 + j .Lcommon # go to common code for memcpy+bcopy + + +/* + * Byte by byte copy + */ + .align 4 + .byte 0 # 1 mod 4 alignment for LOOPNEZ + # (0 mod 4 alignment for LBEG) +.Lbytecopy: +#if XCHAL_HAVE_LOOPS + loopnez a4, .Lbytecopydone +#else /* !XCHAL_HAVE_LOOPS */ + beqz a4, .Lbytecopydone + add a7, a3, a4 # a7 = end address for source +#endif /* !XCHAL_HAVE_LOOPS */ +.Lnextbyte: + l8ui a6, a3, 0 + addi a3, a3, 1 + s8i a6, a5, 0 + addi a5, a5, 1 +#if !XCHAL_HAVE_LOOPS + blt a3, a7, .Lnextbyte +#endif /* !XCHAL_HAVE_LOOPS */ +.Lbytecopydone: + retw + +/* + * Destination is unaligned + */ + + .align 4 +.Ldst1mod2: # dst is only byte aligned + _bltui a4, 7, .Lbytecopy # do short copies byte by byte + + # copy 1 byte + l8ui a6, a3, 0 + addi a3, a3, 1 + addi a4, a4, -1 + s8i a6, a5, 0 + addi a5, a5, 1 + _bbci.l a5, 1, .Ldstaligned # if dst is now aligned, then + # return to main algorithm +.Ldst2mod4: # dst 16-bit aligned + # copy 2 bytes + _bltui a4, 6, .Lbytecopy # do short copies byte by byte + l8ui a6, a3, 0 + l8ui a7, a3, 1 + addi a3, a3, 2 + addi a4, a4, -2 + s8i a6, a5, 0 + s8i a7, a5, 1 + addi a5, a5, 2 + j .Ldstaligned # dst is now aligned, return to main algorithm + + .align 4 + .global memcpy + .type memcpy,@function +memcpy: + .global memmove + .type memmove,@function +memmove: + + entry sp, 16 # minimal stack frame + # a2/ dst, a3/ src, a4/ len + mov a5, a2 # copy dst so that a2 is return value +.Lcommon: + _bbsi.l a2, 0, .Ldst1mod2 # if dst is 1 mod 2 + _bbsi.l a2, 1, .Ldst2mod4 # if dst is 2 mod 4 +.Ldstaligned: # return here from .Ldst?mod? once dst is aligned + srli a7, a4, 4 # number of loop iterations with 16B + # per iteration + movi a8, 3 # if source is not aligned, + _bany a3, a8, .Lsrcunaligned # then use shifting copy + /* + * Destination and source are word-aligned, use word copy. + */ + # copy 16 bytes per iteration for word-aligned dst and word-aligned src +#if XCHAL_HAVE_LOOPS + loopnez a7, .Loop1done +#else /* !XCHAL_HAVE_LOOPS */ + beqz a7, .Loop1done + slli a8, a7, 4 + add a8, a8, a3 # a8 = end of last 16B source chunk +#endif /* !XCHAL_HAVE_LOOPS */ +.Loop1: + l32i a6, a3, 0 + l32i a7, a3, 4 + s32i a6, a5, 0 + l32i a6, a3, 8 + s32i a7, a5, 4 + l32i a7, a3, 12 + s32i a6, a5, 8 + addi a3, a3, 16 + s32i a7, a5, 12 + addi a5, a5, 16 +#if !XCHAL_HAVE_LOOPS + blt a3, a8, .Loop1 +#endif /* !XCHAL_HAVE_LOOPS */ +.Loop1done: + bbci.l a4, 3, .L2 + # copy 8 bytes + l32i a6, a3, 0 + l32i a7, a3, 4 + addi a3, a3, 8 + s32i a6, a5, 0 + s32i a7, a5, 4 + addi a5, a5, 8 +.L2: + bbsi.l a4, 2, .L3 + bbsi.l a4, 1, .L4 + bbsi.l a4, 0, .L5 + retw +.L3: + # copy 4 bytes + l32i a6, a3, 0 + addi a3, a3, 4 + s32i a6, a5, 0 + addi a5, a5, 4 + bbsi.l a4, 1, .L4 + bbsi.l a4, 0, .L5 + retw +.L4: + # copy 2 bytes + l16ui a6, a3, 0 + addi a3, a3, 2 + s16i a6, a5, 0 + addi a5, a5, 2 + bbsi.l a4, 0, .L5 + retw +.L5: + # copy 1 byte + l8ui a6, a3, 0 + s8i a6, a5, 0 + retw + +/* + * Destination is aligned, Source is unaligned + */ + + .align 4 +.Lsrcunaligned: + _beqz a4, .Ldone # avoid loading anything for zero-length copies + # copy 16 bytes per iteration for word-aligned dst and unaligned src + ssa8 a3 # set shift amount from byte offset +#define SIM_CHECKS_ALIGNMENT 1 /* set to 1 when running on ISS (simulator) with the + lint or ferret client, or 0 to save a few cycles */ +#if XCHAL_UNALIGNED_LOAD_EXCEPTION || SIM_CHECKS_ALIGNMENT + and a11, a3, a8 # save unalignment offset for below + sub a3, a3, a11 # align a3 +#endif + l32i a6, a3, 0 # load first word +#if XCHAL_HAVE_LOOPS + loopnez a7, .Loop2done +#else /* !XCHAL_HAVE_LOOPS */ + beqz a7, .Loop2done + slli a10, a7, 4 + add a10, a10, a3 # a10 = end of last 16B source chunk +#endif /* !XCHAL_HAVE_LOOPS */ +.Loop2: + l32i a7, a3, 4 + l32i a8, a3, 8 + src_b a6, a6, a7 + s32i a6, a5, 0 + l32i a9, a3, 12 + src_b a7, a7, a8 + s32i a7, a5, 4 + l32i a6, a3, 16 + src_b a8, a8, a9 + s32i a8, a5, 8 + addi a3, a3, 16 + src_b a9, a9, a6 + s32i a9, a5, 12 + addi a5, a5, 16 +#if !XCHAL_HAVE_LOOPS + blt a3, a10, .Loop2 +#endif /* !XCHAL_HAVE_LOOPS */ +.Loop2done: + bbci.l a4, 3, .L12 + # copy 8 bytes + l32i a7, a3, 4 + l32i a8, a3, 8 + src_b a6, a6, a7 + s32i a6, a5, 0 + addi a3, a3, 8 + src_b a7, a7, a8 + s32i a7, a5, 4 + addi a5, a5, 8 + mov a6, a8 +.L12: + bbci.l a4, 2, .L13 + # copy 4 bytes + l32i a7, a3, 4 + addi a3, a3, 4 + src_b a6, a6, a7 + s32i a6, a5, 0 + addi a5, a5, 4 + mov a6, a7 +.L13: +#if XCHAL_UNALIGNED_LOAD_EXCEPTION || SIM_CHECKS_ALIGNMENT + add a3, a3, a11 # readjust a3 with correct misalignment +#endif + bbsi.l a4, 1, .L14 + bbsi.l a4, 0, .L15 +.Ldone: retw +.L14: + # copy 2 bytes + l8ui a6, a3, 0 + l8ui a7, a3, 1 + addi a3, a3, 2 + s8i a6, a5, 0 + s8i a7, a5, 1 + addi a5, a5, 2 + bbsi.l a4, 0, .L15 + retw +.L15: + # copy 1 byte + l8ui a6, a3, 0 + s8i a6, a5, 0 + retw + +/* + * Local Variables: + * mode:fundamental + * comment-start: "# " + * comment-start-skip: "# *" + * End: + */ diff --git a/arch/xtensa/lib/memset.S b/arch/xtensa/lib/memset.S new file mode 100644 index 000000000000..4de25134bc62 --- /dev/null +++ b/arch/xtensa/lib/memset.S @@ -0,0 +1,160 @@ +/* + * arch/xtensa/lib/memset.S + * + * ANSI C standard library function memset + * (Well, almost. .fixup code might return zero.) + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2002 Tensilica Inc. + */ + +#include <xtensa/coreasm.h> + +/* + * void *memset(void *dst, int c, size_t length) + * + * The algorithm is as follows: + * Create a word with c in all byte positions + * If the destination is aligned, + * do 16B chucks with a loop, and then finish up with + * 8B, 4B, 2B, and 1B stores conditional on the length. + * If destination is unaligned, align it by conditionally + * setting 1B and 2B and then go to aligned case. + * This code tries to use fall-through branches for the common + * case of an aligned destination (except for the branches to + * the alignment labels). + */ + +/* Load or store instructions that may cause exceptions use the EX macro. */ + +#define EX(insn,reg1,reg2,offset,handler) \ +9: insn reg1, reg2, offset; \ + .section __ex_table, "a"; \ + .word 9b, handler; \ + .previous + + +.text +.align 4 +.global memset +.type memset,@function +memset: + entry sp, 16 # minimal stack frame + # a2/ dst, a3/ c, a4/ length + extui a3, a3, 0, 8 # mask to just 8 bits + slli a7, a3, 8 # duplicate character in all bytes of word + or a3, a3, a7 # ... + slli a7, a3, 16 # ... + or a3, a3, a7 # ... + mov a5, a2 # copy dst so that a2 is return value + movi a6, 3 # for alignment tests + bany a2, a6, .Ldstunaligned # if dst is unaligned +.L0: # return here from .Ldstunaligned when dst is aligned + srli a7, a4, 4 # number of loop iterations with 16B + # per iteration + bnez a4, .Laligned + retw + +/* + * Destination is word-aligned. + */ + # set 16 bytes per iteration for word-aligned dst + .align 4 # 1 mod 4 alignment for LOOPNEZ + .byte 0 # (0 mod 4 alignment for LBEG) +.Laligned: +#if XCHAL_HAVE_LOOPS + loopnez a7, .Loop1done +#else /* !XCHAL_HAVE_LOOPS */ + beqz a7, .Loop1done + slli a6, a7, 4 + add a6, a6, a5 # a6 = end of last 16B chunk +#endif /* !XCHAL_HAVE_LOOPS */ +.Loop1: + EX(s32i, a3, a5, 0, memset_fixup) + EX(s32i, a3, a5, 4, memset_fixup) + EX(s32i, a3, a5, 8, memset_fixup) + EX(s32i, a3, a5, 12, memset_fixup) + addi a5, a5, 16 +#if !XCHAL_HAVE_LOOPS + blt a5, a6, .Loop1 +#endif /* !XCHAL_HAVE_LOOPS */ +.Loop1done: + bbci.l a4, 3, .L2 + # set 8 bytes + EX(s32i, a3, a5, 0, memset_fixup) + EX(s32i, a3, a5, 4, memset_fixup) + addi a5, a5, 8 +.L2: + bbci.l a4, 2, .L3 + # set 4 bytes + EX(s32i, a3, a5, 0, memset_fixup) + addi a5, a5, 4 +.L3: + bbci.l a4, 1, .L4 + # set 2 bytes + EX(s16i, a3, a5, 0, memset_fixup) + addi a5, a5, 2 +.L4: + bbci.l a4, 0, .L5 + # set 1 byte + EX(s8i, a3, a5, 0, memset_fixup) +.L5: +.Lret1: + retw + +/* + * Destination is unaligned + */ + +.Ldstunaligned: + bltui a4, 8, .Lbyteset # do short copies byte by byte + bbci.l a5, 0, .L20 # branch if dst alignment half-aligned + # dst is only byte aligned + # set 1 byte + EX(s8i, a3, a5, 0, memset_fixup) + addi a5, a5, 1 + addi a4, a4, -1 + # now retest if dst aligned + bbci.l a5, 1, .L0 # if now aligned, return to main algorithm +.L20: + # dst half-aligned + # set 2 bytes + EX(s16i, a3, a5, 0, memset_fixup) + addi a5, a5, 2 + addi a4, a4, -2 + j .L0 # dst is now aligned, return to main algorithm + +/* + * Byte by byte set + */ + .align 4 + .byte 0 # 1 mod 4 alignment for LOOPNEZ + # (0 mod 4 alignment for LBEG) +.Lbyteset: +#if XCHAL_HAVE_LOOPS + loopnez a4, .Lbytesetdone +#else /* !XCHAL_HAVE_LOOPS */ + beqz a4, .Lbytesetdone + add a6, a5, a4 # a6 = ending address +#endif /* !XCHAL_HAVE_LOOPS */ +.Lbyteloop: + EX(s8i, a3, a5, 0, memset_fixup) + addi a5, a5, 1 +#if !XCHAL_HAVE_LOOPS + blt a5, a6, .Lbyteloop +#endif /* !XCHAL_HAVE_LOOPS */ +.Lbytesetdone: + retw + + + .section .fixup, "ax" + .align 4 + +/* We return zero if a failure occurred. */ + +memset_fixup: + movi a2, 0 + retw diff --git a/arch/xtensa/lib/pci-auto.c b/arch/xtensa/lib/pci-auto.c new file mode 100644 index 000000000000..90c790f6123b --- /dev/null +++ b/arch/xtensa/lib/pci-auto.c @@ -0,0 +1,352 @@ +/* + * arch/xtensa/kernel/pci-auto.c + * + * PCI autoconfiguration library + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Chris Zankel <zankel@tensilica.com, cez@zankel.net> + * + * Based on work from Matt Porter <mporter@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> + +#include <asm/pci-bridge.h> + + +/* + * + * Setting up a PCI + * + * pci_ctrl->first_busno = <first bus number (0)> + * pci_ctrl->last_busno = <last bus number (0xff)> + * pci_ctrl->ops = <PCI config operations> + * pci_ctrl->map_irq = <function to return the interrupt number for a device> + * + * pci_ctrl->io_space.start = <IO space start address (PCI view)> + * pci_ctrl->io_space.end = <IO space end address (PCI view)> + * pci_ctrl->io_space.base = <IO space offset: address 0 from CPU space> + * pci_ctrl->mem_space.start = <MEM space start address (PCI view)> + * pci_ctrl->mem_space.end = <MEM space end address (PCI view)> + * pci_ctrl->mem_space.base = <MEM space offset: address 0 from CPU space> + * + * pcibios_init_resource(&pci_ctrl->io_resource, <IO space start>, + * <IO space end>, IORESOURCE_IO, "PCI host bridge"); + * pcibios_init_resource(&pci_ctrl->mem_resources[0], <MEM space start>, + * <MEM space end>, IORESOURCE_MEM, "PCI host bridge"); + * + * pci_ctrl->last_busno = pciauto_bus_scan(pci_ctrl,pci_ctrl->first_busno); + * + * int __init pciauto_bus_scan(struct pci_controller *pci_ctrl, int current_bus) + * + */ + + +/* define DEBUG to print some debugging messages. */ + +#undef DEBUG + +#ifdef DEBUG +# define DBG(x...) printk(x) +#else +# define DBG(x...) +#endif + +static int pciauto_upper_iospc; +static int pciauto_upper_memspc; + +static struct pci_dev pciauto_dev; +static struct pci_bus pciauto_bus; + +/* + * Helper functions + */ + +/* Initialize the bars of a PCI device. */ + +static void __init +pciauto_setup_bars(struct pci_dev *dev, int bar_limit) +{ + int bar_size; + int bar, bar_nr; + int *upper_limit; + int found_mem64 = 0; + + for (bar = PCI_BASE_ADDRESS_0, bar_nr = 0; + bar <= bar_limit; + bar+=4, bar_nr++) + { + /* Tickle the BAR and get the size */ + pci_write_config_dword(dev, bar, 0xffffffff); + pci_read_config_dword(dev, bar, &bar_size); + + /* If BAR is not implemented go to the next BAR */ + if (!bar_size) + continue; + + /* Check the BAR type and set our address mask */ + if (bar_size & PCI_BASE_ADDRESS_SPACE_IO) + { + bar_size &= PCI_BASE_ADDRESS_IO_MASK; + upper_limit = &pciauto_upper_iospc; + DBG("PCI Autoconfig: BAR %d, I/O, ", bar_nr); + } + else + { + if ((bar_size & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == + PCI_BASE_ADDRESS_MEM_TYPE_64) + found_mem64 = 1; + + bar_size &= PCI_BASE_ADDRESS_MEM_MASK; + upper_limit = &pciauto_upper_memspc; + DBG("PCI Autoconfig: BAR %d, Mem, ", bar_nr); + } + + /* Allocate a base address (bar_size is negative!) */ + *upper_limit = (*upper_limit + bar_size) & bar_size; + + /* Write it out and update our limit */ + pci_write_config_dword(dev, bar, *upper_limit); + + /* + * If we are a 64-bit decoder then increment to the + * upper 32 bits of the bar and force it to locate + * in the lower 4GB of memory. + */ + + if (found_mem64) + pci_write_config_dword(dev, (bar+=4), 0x00000000); + + DBG("size=0x%x, address=0x%x\n", ~bar_size + 1, *upper_limit); + } +} + +/* Initialize the interrupt number. */ + +static void __init +pciauto_setup_irq(struct pci_controller* pci_ctrl,struct pci_dev *dev,int devfn) +{ + u8 pin; + int irq = 0; + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + + /* Fix illegal pin numbers. */ + + if (pin == 0 || pin > 4) + pin = 1; + + if (pci_ctrl->map_irq) + irq = pci_ctrl->map_irq(dev, PCI_SLOT(devfn), pin); + + if (irq == -1) + irq = 0; + + DBG("PCI Autoconfig: Interrupt %d, pin %d\n", irq, pin); + + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + + +static void __init +pciauto_prescan_setup_bridge(struct pci_dev *dev, int current_bus, + int sub_bus, int *iosave, int *memsave) +{ + /* Configure bus number registers */ + pci_write_config_byte(dev, PCI_PRIMARY_BUS, current_bus); + pci_write_config_byte(dev, PCI_SECONDARY_BUS, sub_bus + 1); + pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, 0xff); + + /* Round memory allocator to 1MB boundary */ + pciauto_upper_memspc &= ~(0x100000 - 1); + *memsave = pciauto_upper_memspc; + + /* Round I/O allocator to 4KB boundary */ + pciauto_upper_iospc &= ~(0x1000 - 1); + *iosave = pciauto_upper_iospc; + + /* Set up memory and I/O filter limits, assume 32-bit I/O space */ + pci_write_config_word(dev, PCI_MEMORY_LIMIT, + ((pciauto_upper_memspc - 1) & 0xfff00000) >> 16); + pci_write_config_byte(dev, PCI_IO_LIMIT, + ((pciauto_upper_iospc - 1) & 0x0000f000) >> 8); + pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16, + ((pciauto_upper_iospc - 1) & 0xffff0000) >> 16); +} + +static void __init +pciauto_postscan_setup_bridge(struct pci_dev *dev, int current_bus, int sub_bus, + int *iosave, int *memsave) +{ + int cmdstat; + + /* Configure bus number registers */ + pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, sub_bus); + + /* + * Round memory allocator to 1MB boundary. + * If no space used, allocate minimum. + */ + pciauto_upper_memspc &= ~(0x100000 - 1); + if (*memsave == pciauto_upper_memspc) + pciauto_upper_memspc -= 0x00100000; + + pci_write_config_word(dev, PCI_MEMORY_BASE, pciauto_upper_memspc >> 16); + + /* Allocate 1MB for pre-fretch */ + pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, + ((pciauto_upper_memspc - 1) & 0xfff00000) >> 16); + + pciauto_upper_memspc -= 0x100000; + + pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, + pciauto_upper_memspc >> 16); + + /* Round I/O allocator to 4KB boundary */ + pciauto_upper_iospc &= ~(0x1000 - 1); + if (*iosave == pciauto_upper_iospc) + pciauto_upper_iospc -= 0x1000; + + pci_write_config_byte(dev, PCI_IO_BASE, + (pciauto_upper_iospc & 0x0000f000) >> 8); + pci_write_config_word(dev, PCI_IO_BASE_UPPER16, + pciauto_upper_iospc >> 16); + + /* Enable memory and I/O accesses, enable bus master */ + pci_read_config_dword(dev, PCI_COMMAND, &cmdstat); + pci_write_config_dword(dev, PCI_COMMAND, + cmdstat | + PCI_COMMAND_IO | + PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER); +} + +/* + * Scan the current PCI bus. + */ + + +int __init pciauto_bus_scan(struct pci_controller *pci_ctrl, int current_bus) +{ + int sub_bus, pci_devfn, pci_class, cmdstat, found_multi=0; + unsigned short vid; + unsigned char header_type; + struct pci_dev *dev = &pciauto_dev; + + pciauto_dev.bus = &pciauto_bus; + pciauto_dev.sysdata = pci_ctrl; + pciauto_bus.ops = pci_ctrl->ops; + + /* + * Fetch our I/O and memory space upper boundaries used + * to allocated base addresses on this pci_controller. + */ + + if (current_bus == pci_ctrl->first_busno) + { + pciauto_upper_iospc = pci_ctrl->io_resource.end + 1; + pciauto_upper_memspc = pci_ctrl->mem_resources[0].end + 1; + } + + sub_bus = current_bus; + + for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) + { + /* Skip our host bridge */ + if ((current_bus == pci_ctrl->first_busno) && (pci_devfn == 0)) + continue; + + if (PCI_FUNC(pci_devfn) && !found_multi) + continue; + + pciauto_bus.number = current_bus; + pciauto_dev.devfn = pci_devfn; + + /* If config space read fails from this device, move on */ + if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type)) + continue; + + if (!PCI_FUNC(pci_devfn)) + found_multi = header_type & 0x80; + pci_read_config_word(dev, PCI_VENDOR_ID, &vid); + + if (vid == 0xffff || vid == 0x0000) { + found_multi = 0; + continue; + } + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &pci_class); + + if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) { + + int iosave, memsave; + + DBG("PCI Autoconfig: Found P2P bridge, device %d\n", + PCI_SLOT(pci_devfn)); + + /* Allocate PCI I/O and/or memory space */ + pciauto_setup_bars(dev, PCI_BASE_ADDRESS_1); + + pciauto_prescan_setup_bridge(dev, current_bus, sub_bus, + &iosave, &memsave); + sub_bus = pciauto_bus_scan(pci_ctrl, sub_bus+1); + pciauto_postscan_setup_bridge(dev, current_bus, sub_bus, + &iosave, &memsave); + pciauto_bus.number = current_bus; + + continue; + + } + + +#if 0 + /* Skip legacy mode IDE controller */ + + if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) { + + unsigned char prg_iface; + pci_read_config_byte(dev, PCI_CLASS_PROG, &prg_iface); + + if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) { + DBG("PCI Autoconfig: Skipping legacy mode " + "IDE controller\n"); + continue; + } + } +#endif + + /* + * Found a peripheral, enable some standard + * settings + */ + + pci_read_config_dword(dev, PCI_COMMAND, &cmdstat); + pci_write_config_dword(dev, PCI_COMMAND, + cmdstat | + PCI_COMMAND_IO | + PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80); + + /* Allocate PCI I/O and/or memory space */ + DBG("PCI Autoconfig: Found Bus %d, Device %d, Function %d\n", + current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn) ); + + pciauto_setup_bars(dev, PCI_BASE_ADDRESS_5); + pciauto_setup_irq(pci_ctrl, dev, pci_devfn); + } + return sub_bus; +} + + + + + diff --git a/arch/xtensa/lib/strcasecmp.c b/arch/xtensa/lib/strcasecmp.c new file mode 100644 index 000000000000..165b2d6effa5 --- /dev/null +++ b/arch/xtensa/lib/strcasecmp.c @@ -0,0 +1,32 @@ +/* + * linux/arch/xtensa/lib/strcasecmp.c + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2002 Tensilica Inc. + */ + +#include <linux/string.h> + + +/* We handle nothing here except the C locale. Since this is used in + only one place, on strings known to contain only 7 bit ASCII, this + is ok. */ + +int strcasecmp(const char *a, const char *b) +{ + int ca, cb; + + do { + ca = *a++ & 0xff; + cb = *b++ & 0xff; + if (ca >= 'A' && ca <= 'Z') + ca += 'a' - 'A'; + if (cb >= 'A' && cb <= 'Z') + cb += 'a' - 'A'; + } while (ca == cb && ca != '\0'); + + return ca - cb; +} diff --git a/arch/xtensa/lib/strncpy_user.S b/arch/xtensa/lib/strncpy_user.S new file mode 100644 index 000000000000..71d55df43893 --- /dev/null +++ b/arch/xtensa/lib/strncpy_user.S @@ -0,0 +1,224 @@ +/* + * arch/xtensa/lib/strncpy_user.S + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Returns: -EFAULT if exception before terminator, N if the entire + * buffer filled, else strlen. + * + * Copyright (C) 2002 Tensilica Inc. + */ + +#include <xtensa/coreasm.h> +#include <linux/errno.h> + +/* Load or store instructions that may cause exceptions use the EX macro. */ + +#define EX(insn,reg1,reg2,offset,handler) \ +9: insn reg1, reg2, offset; \ + .section __ex_table, "a"; \ + .word 9b, handler; \ + .previous + +/* + * char *__strncpy_user(char *dst, const char *src, size_t len) + */ +.text +.begin literal +.align 4 +.Lmask0: + .byte 0xff, 0x00, 0x00, 0x00 +.Lmask1: + .byte 0x00, 0xff, 0x00, 0x00 +.Lmask2: + .byte 0x00, 0x00, 0xff, 0x00 +.Lmask3: + .byte 0x00, 0x00, 0x00, 0xff +.end literal + +# Register use +# a0/ return address +# a1/ stack pointer +# a2/ return value +# a3/ src +# a4/ len +# a5/ mask0 +# a6/ mask1 +# a7/ mask2 +# a8/ mask3 +# a9/ tmp +# a10/ tmp +# a11/ dst +# a12/ tmp + +.align 4 +.global __strncpy_user +.type __strncpy_user,@function +__strncpy_user: + entry sp, 16 # minimal stack frame + # a2/ dst, a3/ src, a4/ len + mov a11, a2 # leave dst in return value register + beqz a4, .Lret # if len is zero + l32r a5, .Lmask0 # mask for byte 0 + l32r a6, .Lmask1 # mask for byte 1 + l32r a7, .Lmask2 # mask for byte 2 + l32r a8, .Lmask3 # mask for byte 3 + bbsi.l a3, 0, .Lsrc1mod2 # if only 8-bit aligned + bbsi.l a3, 1, .Lsrc2mod4 # if only 16-bit aligned +.Lsrcaligned: # return here when src is word-aligned + srli a12, a4, 2 # number of loop iterations with 4B per loop + movi a9, 3 + bnone a11, a9, .Laligned + j .Ldstunaligned + +.Lsrc1mod2: # src address is odd + EX(l8ui, a9, a3, 0, fixup_l) # get byte 0 + addi a3, a3, 1 # advance src pointer + EX(s8i, a9, a11, 0, fixup_s) # store byte 0 + beqz a9, .Lret # if byte 0 is zero + addi a11, a11, 1 # advance dst pointer + addi a4, a4, -1 # decrement len + beqz a4, .Lret # if len is zero + bbci.l a3, 1, .Lsrcaligned # if src is now word-aligned + +.Lsrc2mod4: # src address is 2 mod 4 + EX(l8ui, a9, a3, 0, fixup_l) # get byte 0 + /* 1-cycle interlock */ + EX(s8i, a9, a11, 0, fixup_s) # store byte 0 + beqz a9, .Lret # if byte 0 is zero + addi a11, a11, 1 # advance dst pointer + addi a4, a4, -1 # decrement len + beqz a4, .Lret # if len is zero + EX(l8ui, a9, a3, 1, fixup_l) # get byte 0 + addi a3, a3, 2 # advance src pointer + EX(s8i, a9, a11, 0, fixup_s) # store byte 0 + beqz a9, .Lret # if byte 0 is zero + addi a11, a11, 1 # advance dst pointer + addi a4, a4, -1 # decrement len + bnez a4, .Lsrcaligned # if len is nonzero +.Lret: + sub a2, a11, a2 # compute strlen + retw + +/* + * dst is word-aligned, src is word-aligned + */ + .align 4 # 1 mod 4 alignment for LOOPNEZ + .byte 0 # (0 mod 4 alignment for LBEG) +.Laligned: +#if XCHAL_HAVE_LOOPS + loopnez a12, .Loop1done +#else + beqz a12, .Loop1done + slli a12, a12, 2 + add a12, a12, a11 # a12 = end of last 4B chunck +#endif +.Loop1: + EX(l32i, a9, a3, 0, fixup_l) # get word from src + addi a3, a3, 4 # advance src pointer + bnone a9, a5, .Lz0 # if byte 0 is zero + bnone a9, a6, .Lz1 # if byte 1 is zero + bnone a9, a7, .Lz2 # if byte 2 is zero + EX(s32i, a9, a11, 0, fixup_s) # store word to dst + bnone a9, a8, .Lz3 # if byte 3 is zero + addi a11, a11, 4 # advance dst pointer +#if !XCHAL_HAVE_LOOPS + blt a11, a12, .Loop1 +#endif + +.Loop1done: + bbci.l a4, 1, .L100 + # copy 2 bytes + EX(l16ui, a9, a3, 0, fixup_l) + addi a3, a3, 2 # advance src pointer +#ifdef __XTENSA_EB__ + bnone a9, a7, .Lz0 # if byte 2 is zero + bnone a9, a8, .Lz1 # if byte 3 is zero +#else + bnone a9, a5, .Lz0 # if byte 0 is zero + bnone a9, a6, .Lz1 # if byte 1 is zero +#endif + EX(s16i, a9, a11, 0, fixup_s) + addi a11, a11, 2 # advance dst pointer +.L100: + bbci.l a4, 0, .Lret + EX(l8ui, a9, a3, 0, fixup_l) + /* slot */ + EX(s8i, a9, a11, 0, fixup_s) + beqz a9, .Lret # if byte is zero + addi a11, a11, 1-3 # advance dst ptr 1, but also cancel + # the effect of adding 3 in .Lz3 code + /* fall thru to .Lz3 and "retw" */ + +.Lz3: # byte 3 is zero + addi a11, a11, 3 # advance dst pointer + sub a2, a11, a2 # compute strlen + retw +.Lz0: # byte 0 is zero +#ifdef __XTENSA_EB__ + movi a9, 0 +#endif /* __XTENSA_EB__ */ + EX(s8i, a9, a11, 0, fixup_s) + sub a2, a11, a2 # compute strlen + retw +.Lz1: # byte 1 is zero +#ifdef __XTENSA_EB__ + extui a9, a9, 16, 16 +#endif /* __XTENSA_EB__ */ + EX(s16i, a9, a11, 0, fixup_s) + addi a11, a11, 1 # advance dst pointer + sub a2, a11, a2 # compute strlen + retw +.Lz2: # byte 2 is zero +#ifdef __XTENSA_EB__ + extui a9, a9, 16, 16 +#endif /* __XTENSA_EB__ */ + EX(s16i, a9, a11, 0, fixup_s) + movi a9, 0 + EX(s8i, a9, a11, 2, fixup_s) + addi a11, a11, 2 # advance dst pointer + sub a2, a11, a2 # compute strlen + retw + + .align 4 # 1 mod 4 alignment for LOOPNEZ + .byte 0 # (0 mod 4 alignment for LBEG) +.Ldstunaligned: +/* + * for now just use byte copy loop + */ +#if XCHAL_HAVE_LOOPS + loopnez a4, .Lunalignedend +#else + beqz a4, .Lunalignedend + add a12, a11, a4 # a12 = ending address +#endif /* XCHAL_HAVE_LOOPS */ +.Lnextbyte: + EX(l8ui, a9, a3, 0, fixup_l) + addi a3, a3, 1 + EX(s8i, a9, a11, 0, fixup_s) + beqz a9, .Lunalignedend + addi a11, a11, 1 +#if !XCHAL_HAVE_LOOPS + blt a11, a12, .Lnextbyte +#endif + +.Lunalignedend: + sub a2, a11, a2 # compute strlen + retw + + + .section .fixup, "ax" + .align 4 + + /* For now, just return -EFAULT. Future implementations might + * like to clear remaining kernel space, like the fixup + * implementation in memset(). Thus, we differentiate between + * load/store fixups. */ + +fixup_s: +fixup_l: + movi a2, -EFAULT + retw + diff --git a/arch/xtensa/lib/strnlen_user.S b/arch/xtensa/lib/strnlen_user.S new file mode 100644 index 000000000000..cdff4d670f3b --- /dev/null +++ b/arch/xtensa/lib/strnlen_user.S @@ -0,0 +1,147 @@ +/* + * arch/xtensa/lib/strnlen_user.S + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Returns strnlen, including trailing zero terminator. + * Zero indicates error. + * + * Copyright (C) 2002 Tensilica Inc. + */ + +#include <xtensa/coreasm.h> + +/* Load or store instructions that may cause exceptions use the EX macro. */ + +#define EX(insn,reg1,reg2,offset,handler) \ +9: insn reg1, reg2, offset; \ + .section __ex_table, "a"; \ + .word 9b, handler; \ + .previous + +/* + * size_t __strnlen_user(const char *s, size_t len) + */ +.text +.begin literal +.align 4 +.Lmask0: + .byte 0xff, 0x00, 0x00, 0x00 +.Lmask1: + .byte 0x00, 0xff, 0x00, 0x00 +.Lmask2: + .byte 0x00, 0x00, 0xff, 0x00 +.Lmask3: + .byte 0x00, 0x00, 0x00, 0xff +.end literal + +# Register use: +# a2/ src +# a3/ len +# a4/ tmp +# a5/ mask0 +# a6/ mask1 +# a7/ mask2 +# a8/ mask3 +# a9/ tmp +# a10/ tmp + +.align 4 +.global __strnlen_user +.type __strnlen_user,@function +__strnlen_user: + entry sp, 16 # minimal stack frame + # a2/ s, a3/ len + addi a4, a2, -4 # because we overincrement at the end; + # we compensate with load offsets of 4 + l32r a5, .Lmask0 # mask for byte 0 + l32r a6, .Lmask1 # mask for byte 1 + l32r a7, .Lmask2 # mask for byte 2 + l32r a8, .Lmask3 # mask for byte 3 + bbsi.l a2, 0, .L1mod2 # if only 8-bit aligned + bbsi.l a2, 1, .L2mod4 # if only 16-bit aligned + +/* + * String is word-aligned. + */ +.Laligned: + srli a10, a3, 2 # number of loop iterations with 4B per loop +#if XCHAL_HAVE_LOOPS + loopnez a10, .Ldone +#else + beqz a10, .Ldone + slli a10, a10, 2 + add a10, a10, a4 # a10 = end of last 4B chunk +#endif /* XCHAL_HAVE_LOOPS */ +.Loop: + EX(l32i, a9, a4, 4, lenfixup) # get next word of string + addi a4, a4, 4 # advance string pointer + bnone a9, a5, .Lz0 # if byte 0 is zero + bnone a9, a6, .Lz1 # if byte 1 is zero + bnone a9, a7, .Lz2 # if byte 2 is zero + bnone a9, a8, .Lz3 # if byte 3 is zero +#if !XCHAL_HAVE_LOOPS + blt a4, a10, .Loop +#endif + +.Ldone: + EX(l32i, a9, a4, 4, lenfixup) # load 4 bytes for remaining checks + + bbci.l a3, 1, .L100 + # check two more bytes (bytes 0, 1 of word) + addi a4, a4, 2 # advance string pointer + bnone a9, a5, .Lz0 # if byte 0 is zero + bnone a9, a6, .Lz1 # if byte 1 is zero +.L100: + bbci.l a3, 0, .L101 + # check one more byte (byte 2 of word) + # Actually, we don't need to check. Zero or nonzero, we'll add one. + # Do not add an extra one for the NULL terminator since we have + # exhausted the original len parameter. + addi a4, a4, 1 # advance string pointer +.L101: + sub a2, a4, a2 # compute length + retw + +# NOTE that in several places below, we point to the byte just after +# the zero byte in order to include the NULL terminator in the count. + +.Lz3: # byte 3 is zero + addi a4, a4, 3 # point to zero byte +.Lz0: # byte 0 is zero + addi a4, a4, 1 # point just beyond zero byte + sub a2, a4, a2 # subtract to get length + retw +.Lz1: # byte 1 is zero + addi a4, a4, 1+1 # point just beyond zero byte + sub a2, a4, a2 # subtract to get length + retw +.Lz2: # byte 2 is zero + addi a4, a4, 2+1 # point just beyond zero byte + sub a2, a4, a2 # subtract to get length + retw + +.L1mod2: # address is odd + EX(l8ui, a9, a4, 4, lenfixup) # get byte 0 + addi a4, a4, 1 # advance string pointer + beqz a9, .Lz3 # if byte 0 is zero + bbci.l a4, 1, .Laligned # if string pointer is now word-aligned + +.L2mod4: # address is 2 mod 4 + addi a4, a4, 2 # advance ptr for aligned access + EX(l32i, a9, a4, 0, lenfixup) # get word with first two bytes of string + bnone a9, a7, .Lz2 # if byte 2 (of word, not string) is zero + bany a9, a8, .Laligned # if byte 3 (of word, not string) is nonzero + # byte 3 is zero + addi a4, a4, 3+1 # point just beyond zero byte + sub a2, a4, a2 # subtract to get length + retw + + .section .fixup, "ax" + .align 4 +lenfixup: + movi a2, 0 + retw + diff --git a/arch/xtensa/lib/usercopy.S b/arch/xtensa/lib/usercopy.S new file mode 100644 index 000000000000..265db2693cbd --- /dev/null +++ b/arch/xtensa/lib/usercopy.S @@ -0,0 +1,321 @@ +/* + * arch/xtensa/lib/usercopy.S + * + * Copy to/from user space (derived from arch/xtensa/lib/hal/memcopy.S) + * + * DO NOT COMBINE this function with <arch/xtensa/lib/hal/memcopy.S>. + * It needs to remain separate and distinct. The hal files are part + * of the the Xtensa link-time HAL, and those files may differ per + * processor configuration. Patching the kernel for another + * processor configuration includes replacing the hal files, and we + * could loose the special functionality for accessing user-space + * memory during such a patch. We sacrifice a little code space here + * in favor to simplify code maintenance. + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2002 Tensilica Inc. + */ + + +/* + * size_t __xtensa_copy_user (void *dst, const void *src, size_t len); + * + * The returned value is the number of bytes not copied. Implies zero + * is success. + * + * The general case algorithm is as follows: + * If the destination and source are both aligned, + * do 16B chunks with a loop, and then finish up with + * 8B, 4B, 2B, and 1B copies conditional on the length. + * If destination is aligned and source unaligned, + * do the same, but use SRC to align the source data. + * If destination is unaligned, align it by conditionally + * copying 1B and 2B and then retest. + * This code tries to use fall-through braches for the common + * case of aligned destinations (except for the branches to + * the alignment label). + * + * Register use: + * a0/ return address + * a1/ stack pointer + * a2/ return value + * a3/ src + * a4/ length + * a5/ dst + * a6/ tmp + * a7/ tmp + * a8/ tmp + * a9/ tmp + * a10/ tmp + * a11/ original length + */ + +#include <xtensa/coreasm.h> + +#ifdef __XTENSA_EB__ +#define ALIGN(R, W0, W1) src R, W0, W1 +#define SSA8(R) ssa8b R +#else +#define ALIGN(R, W0, W1) src R, W1, W0 +#define SSA8(R) ssa8l R +#endif + +/* Load or store instructions that may cause exceptions use the EX macro. */ + +#define EX(insn,reg1,reg2,offset,handler) \ +9: insn reg1, reg2, offset; \ + .section __ex_table, "a"; \ + .word 9b, handler; \ + .previous + + + .text + .align 4 + .global __xtensa_copy_user + .type __xtensa_copy_user,@function +__xtensa_copy_user: + entry sp, 16 # minimal stack frame + # a2/ dst, a3/ src, a4/ len + mov a5, a2 # copy dst so that a2 is return value + mov a11, a4 # preserve original len for error case +.Lcommon: + bbsi.l a2, 0, .Ldst1mod2 # if dst is 1 mod 2 + bbsi.l a2, 1, .Ldst2mod4 # if dst is 2 mod 4 +.Ldstaligned: # return here from .Ldstunaligned when dst is aligned + srli a7, a4, 4 # number of loop iterations with 16B + # per iteration + movi a8, 3 # if source is also aligned, + bnone a3, a8, .Laligned # then use word copy + SSA8( a3) # set shift amount from byte offset + bnez a4, .Lsrcunaligned + movi a2, 0 # return success for len==0 + retw + +/* + * Destination is unaligned + */ + +.Ldst1mod2: # dst is only byte aligned + bltui a4, 7, .Lbytecopy # do short copies byte by byte + + # copy 1 byte + EX(l8ui, a6, a3, 0, l_fixup) + addi a3, a3, 1 + EX(s8i, a6, a5, 0, s_fixup) + addi a5, a5, 1 + addi a4, a4, -1 + bbci.l a5, 1, .Ldstaligned # if dst is now aligned, then + # return to main algorithm +.Ldst2mod4: # dst 16-bit aligned + # copy 2 bytes + bltui a4, 6, .Lbytecopy # do short copies byte by byte + EX(l8ui, a6, a3, 0, l_fixup) + EX(l8ui, a7, a3, 1, l_fixup) + addi a3, a3, 2 + EX(s8i, a6, a5, 0, s_fixup) + EX(s8i, a7, a5, 1, s_fixup) + addi a5, a5, 2 + addi a4, a4, -2 + j .Ldstaligned # dst is now aligned, return to main algorithm + +/* + * Byte by byte copy + */ + .align 4 + .byte 0 # 1 mod 4 alignment for LOOPNEZ + # (0 mod 4 alignment for LBEG) +.Lbytecopy: +#if XCHAL_HAVE_LOOPS + loopnez a4, .Lbytecopydone +#else /* !XCHAL_HAVE_LOOPS */ + beqz a4, .Lbytecopydone + add a7, a3, a4 # a7 = end address for source +#endif /* !XCHAL_HAVE_LOOPS */ +.Lnextbyte: + EX(l8ui, a6, a3, 0, l_fixup) + addi a3, a3, 1 + EX(s8i, a6, a5, 0, s_fixup) + addi a5, a5, 1 +#if !XCHAL_HAVE_LOOPS + blt a3, a7, .Lnextbyte +#endif /* !XCHAL_HAVE_LOOPS */ +.Lbytecopydone: + movi a2, 0 # return success for len bytes copied + retw + +/* + * Destination and source are word-aligned. + */ + # copy 16 bytes per iteration for word-aligned dst and word-aligned src + .align 4 # 1 mod 4 alignment for LOOPNEZ + .byte 0 # (0 mod 4 alignment for LBEG) +.Laligned: +#if XCHAL_HAVE_LOOPS + loopnez a7, .Loop1done +#else /* !XCHAL_HAVE_LOOPS */ + beqz a7, .Loop1done + slli a8, a7, 4 + add a8, a8, a3 # a8 = end of last 16B source chunk +#endif /* !XCHAL_HAVE_LOOPS */ +.Loop1: + EX(l32i, a6, a3, 0, l_fixup) + EX(l32i, a7, a3, 4, l_fixup) + EX(s32i, a6, a5, 0, s_fixup) + EX(l32i, a6, a3, 8, l_fixup) + EX(s32i, a7, a5, 4, s_fixup) + EX(l32i, a7, a3, 12, l_fixup) + EX(s32i, a6, a5, 8, s_fixup) + addi a3, a3, 16 + EX(s32i, a7, a5, 12, s_fixup) + addi a5, a5, 16 +#if !XCHAL_HAVE_LOOPS + blt a3, a8, .Loop1 +#endif /* !XCHAL_HAVE_LOOPS */ +.Loop1done: + bbci.l a4, 3, .L2 + # copy 8 bytes + EX(l32i, a6, a3, 0, l_fixup) + EX(l32i, a7, a3, 4, l_fixup) + addi a3, a3, 8 + EX(s32i, a6, a5, 0, s_fixup) + EX(s32i, a7, a5, 4, s_fixup) + addi a5, a5, 8 +.L2: + bbci.l a4, 2, .L3 + # copy 4 bytes + EX(l32i, a6, a3, 0, l_fixup) + addi a3, a3, 4 + EX(s32i, a6, a5, 0, s_fixup) + addi a5, a5, 4 +.L3: + bbci.l a4, 1, .L4 + # copy 2 bytes + EX(l16ui, a6, a3, 0, l_fixup) + addi a3, a3, 2 + EX(s16i, a6, a5, 0, s_fixup) + addi a5, a5, 2 +.L4: + bbci.l a4, 0, .L5 + # copy 1 byte + EX(l8ui, a6, a3, 0, l_fixup) + EX(s8i, a6, a5, 0, s_fixup) +.L5: + movi a2, 0 # return success for len bytes copied + retw + +/* + * Destination is aligned, Source is unaligned + */ + + .align 4 + .byte 0 # 1 mod 4 alignement for LOOPNEZ + # (0 mod 4 alignment for LBEG) +.Lsrcunaligned: + # copy 16 bytes per iteration for word-aligned dst and unaligned src + and a10, a3, a8 # save unalignment offset for below + sub a3, a3, a10 # align a3 (to avoid sim warnings only; not needed for hardware) + EX(l32i, a6, a3, 0, l_fixup) # load first word +#if XCHAL_HAVE_LOOPS + loopnez a7, .Loop2done +#else /* !XCHAL_HAVE_LOOPS */ + beqz a7, .Loop2done + slli a10, a7, 4 + add a10, a10, a3 # a10 = end of last 16B source chunk +#endif /* !XCHAL_HAVE_LOOPS */ +.Loop2: + EX(l32i, a7, a3, 4, l_fixup) + EX(l32i, a8, a3, 8, l_fixup) + ALIGN( a6, a6, a7) + EX(s32i, a6, a5, 0, s_fixup) + EX(l32i, a9, a3, 12, l_fixup) + ALIGN( a7, a7, a8) + EX(s32i, a7, a5, 4, s_fixup) + EX(l32i, a6, a3, 16, l_fixup) + ALIGN( a8, a8, a9) + EX(s32i, a8, a5, 8, s_fixup) + addi a3, a3, 16 + ALIGN( a9, a9, a6) + EX(s32i, a9, a5, 12, s_fixup) + addi a5, a5, 16 +#if !XCHAL_HAVE_LOOPS + blt a3, a10, .Loop2 +#endif /* !XCHAL_HAVE_LOOPS */ +.Loop2done: + bbci.l a4, 3, .L12 + # copy 8 bytes + EX(l32i, a7, a3, 4, l_fixup) + EX(l32i, a8, a3, 8, l_fixup) + ALIGN( a6, a6, a7) + EX(s32i, a6, a5, 0, s_fixup) + addi a3, a3, 8 + ALIGN( a7, a7, a8) + EX(s32i, a7, a5, 4, s_fixup) + addi a5, a5, 8 + mov a6, a8 +.L12: + bbci.l a4, 2, .L13 + # copy 4 bytes + EX(l32i, a7, a3, 4, l_fixup) + addi a3, a3, 4 + ALIGN( a6, a6, a7) + EX(s32i, a6, a5, 0, s_fixup) + addi a5, a5, 4 + mov a6, a7 +.L13: + add a3, a3, a10 # readjust a3 with correct misalignment + bbci.l a4, 1, .L14 + # copy 2 bytes + EX(l8ui, a6, a3, 0, l_fixup) + EX(l8ui, a7, a3, 1, l_fixup) + addi a3, a3, 2 + EX(s8i, a6, a5, 0, s_fixup) + EX(s8i, a7, a5, 1, s_fixup) + addi a5, a5, 2 +.L14: + bbci.l a4, 0, .L15 + # copy 1 byte + EX(l8ui, a6, a3, 0, l_fixup) + EX(s8i, a6, a5, 0, s_fixup) +.L15: + movi a2, 0 # return success for len bytes copied + retw + + + .section .fixup, "ax" + .align 4 + +/* a2 = original dst; a5 = current dst; a11= original len + * bytes_copied = a5 - a2 + * retval = bytes_not_copied = original len - bytes_copied + * retval = a11 - (a5 - a2) + * + * Clearing the remaining pieces of kernel memory plugs security + * holes. This functionality is the equivalent of the *_zeroing + * functions that some architectures provide. + */ + +.Lmemset: + .word memset + +s_fixup: + sub a2, a5, a2 /* a2 <-- bytes copied */ + sub a2, a11, a2 /* a2 <-- bytes not copied */ + retw + +l_fixup: + sub a2, a5, a2 /* a2 <-- bytes copied */ + sub a2, a11, a2 /* a2 <-- bytes not copied == return value */ + + /* void *memset(void *s, int c, size_t n); */ + mov a6, a5 /* s */ + movi a7, 0 /* c */ + mov a8, a2 /* n */ + l32r a4, .Lmemset + callx4 a4 + /* Ignore memset return value in a6. */ + /* a2 still contains bytes not copied. */ + retw + diff --git a/arch/xtensa/mm/Makefile b/arch/xtensa/mm/Makefile new file mode 100644 index 000000000000..a5aed5932d7b --- /dev/null +++ b/arch/xtensa/mm/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for the Linux/Xtensa-specific parts of the memory manager. +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). +# +# Note 2! The CFLAGS definition is now in the main makefile... + +obj-y := init.o fault.o tlb.o misc.o +obj-m := +obj-n := +obj- := diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c new file mode 100644 index 000000000000..a945a33e85a1 --- /dev/null +++ b/arch/xtensa/mm/fault.c @@ -0,0 +1,241 @@ +// TODO VM_EXEC flag work-around, cache aliasing +/* + * arch/xtensa/mm/fault.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> + */ + +#include <linux/mm.h> +#include <linux/module.h> +#include <asm/mmu_context.h> +#include <asm/cacheflush.h> +#include <asm/hardirq.h> +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/pgalloc.h> + +unsigned long asid_cache = ASID_FIRST_VERSION; +void bad_page_fault(struct pt_regs*, unsigned long, int); + +/* + * This routine handles page faults. It determines the address, + * and the problem, and then passes it off to one of the appropriate + * routines. + * + * Note: does not handle Miss and MultiHit. + */ + +void do_page_fault(struct pt_regs *regs) +{ + struct vm_area_struct * vma; + struct mm_struct *mm = current->mm; + unsigned int exccause = regs->exccause; + unsigned int address = regs->excvaddr; + siginfo_t info; + + int is_write, is_exec; + + info.si_code = SEGV_MAPERR; + + /* We fault-in kernel-space virtual memory on-demand. The + * 'reference' page table is init_mm.pgd. + */ + if (address >= TASK_SIZE && !user_mode(regs)) + goto vmalloc_fault; + + /* If we're in an interrupt or have no user + * context, we must not take the fault.. + */ + if (in_atomic() || !mm) { + bad_page_fault(regs, address, SIGSEGV); + return; + } + + is_write = (exccause == XCHAL_EXCCAUSE_STORE_CACHE_ATTRIBUTE) ? 1 : 0; + is_exec = (exccause == XCHAL_EXCCAUSE_ITLB_PRIVILEGE || + exccause == XCHAL_EXCCAUSE_ITLB_MISS || + exccause == XCHAL_EXCCAUSE_FETCH_CACHE_ATTRIBUTE) ? 1 : 0; + +#if 0 + printk("[%s:%d:%08x:%d:%08x:%s%s]\n", current->comm, current->pid, + address, exccause, regs->pc, is_write? "w":"", is_exec? "x":""); +#endif + + down_read(&mm->mmap_sem); + vma = find_vma(mm, address); + + if (!vma) + goto bad_area; + if (vma->vm_start <= address) + goto good_area; + if (!(vma->vm_flags & VM_GROWSDOWN)) + goto bad_area; + if (expand_stack(vma, address)) + goto bad_area; + + /* Ok, we have a good vm_area for this memory access, so + * we can handle it.. + */ + +good_area: + info.si_code = SEGV_ACCERR; + + if (is_write) { + if (!(vma->vm_flags & VM_WRITE)) + goto bad_area; + } else if (is_exec) { + if (!(vma->vm_flags & VM_EXEC)) + goto bad_area; + } else /* Allow read even from write-only pages. */ + if (!(vma->vm_flags & (VM_READ | VM_WRITE))) + goto bad_area; + + /* If for any reason at all we couldn't handle the fault, + * make sure we exit gracefully rather than endlessly redo + * the fault. + */ +survive: + switch (handle_mm_fault(mm, vma, address, is_write)) { + case VM_FAULT_MINOR: + current->min_flt++; + break; + case VM_FAULT_MAJOR: + current->maj_flt++; + break; + case VM_FAULT_SIGBUS: + goto do_sigbus; + case VM_FAULT_OOM: + goto out_of_memory; + default: + BUG(); + } + + up_read(&mm->mmap_sem); + return; + + /* Something tried to access memory that isn't in our memory map.. + * Fix it, but check if it's kernel or user first.. + */ +bad_area: + up_read(&mm->mmap_sem); + if (user_mode(regs)) { + current->thread.bad_vaddr = address; + current->thread.error_code = is_write; + info.si_signo = SIGSEGV; + info.si_errno = 0; + /* info.si_code has been set above */ + info.si_addr = (void *) address; + force_sig_info(SIGSEGV, &info, current); + return; + } + bad_page_fault(regs, address, SIGSEGV); + return; + + + /* We ran out of memory, or some other thing happened to us that made + * us unable to handle the page fault gracefully. + */ +out_of_memory: + up_read(&mm->mmap_sem); + if (current->pid == 1) { + yield(); + down_read(&mm->mmap_sem); + goto survive; + } + printk("VM: killing process %s\n", current->comm); + if (user_mode(regs)) + do_exit(SIGKILL); + bad_page_fault(regs, address, SIGKILL); + return; + +do_sigbus: + up_read(&mm->mmap_sem); + + /* Send a sigbus, regardless of whether we were in kernel + * or user mode. + */ + current->thread.bad_vaddr = address; + info.si_code = SIGBUS; + info.si_errno = 0; + info.si_code = BUS_ADRERR; + info.si_addr = (void *) address; + force_sig_info(SIGBUS, &info, current); + + /* Kernel mode? Handle exceptions or die */ + if (!user_mode(regs)) + bad_page_fault(regs, address, SIGBUS); + +vmalloc_fault: + { + /* Synchronize this task's top level page-table + * with the 'reference' page table. + */ + struct mm_struct *act_mm = current->active_mm; + int index = pgd_index(address); + pgd_t *pgd, *pgd_k; + pmd_t *pmd, *pmd_k; + pte_t *pte_k; + + if (act_mm == NULL) + goto bad_page_fault; + + pgd = act_mm->pgd + index; + pgd_k = init_mm.pgd + index; + + if (!pgd_present(*pgd_k)) + goto bad_page_fault; + + pgd_val(*pgd) = pgd_val(*pgd_k); + + pmd = pmd_offset(pgd, address); + pmd_k = pmd_offset(pgd_k, address); + if (!pmd_present(*pmd) || !pmd_present(*pmd_k)) + goto bad_page_fault; + + pmd_val(*pmd) = pmd_val(*pmd_k); + pte_k = pte_offset_kernel(pmd_k, address); + + if (!pte_present(*pte_k)) + goto bad_page_fault; + return; + } +bad_page_fault: + bad_page_fault(regs, address, SIGKILL); + return; +} + + +void +bad_page_fault(struct pt_regs *regs, unsigned long address, int sig) +{ + extern void die(const char*, struct pt_regs*, long); + const struct exception_table_entry *entry; + + /* Are we prepared to handle this kernel fault? */ + if ((entry = search_exception_tables(regs->pc)) != NULL) { +#if 1 + printk(KERN_DEBUG "%s: Exception at pc=%#010lx (%lx)\n", + current->comm, regs->pc, entry->fixup); +#endif + current->thread.bad_uaddr = address; + regs->pc = entry->fixup; + return; + } + + /* Oops. The kernel tried to access some bad page. We'll have to + * terminate things with extreme prejudice. + */ + printk(KERN_ALERT "Unable to handle kernel paging request at virtual " + "address %08lx\n pc = %08lx, ra = %08lx\n", + address, regs->pc, regs->areg[0]); + die("Oops", regs, sig); + do_exit(sig); +} + diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c new file mode 100644 index 000000000000..56aace84aaeb --- /dev/null +++ b/arch/xtensa/mm/init.c @@ -0,0 +1,551 @@ +/* + * arch/xtensa/mm/init.c + * + * Derived from MIPS, PPC. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> + * Marc Gauthier + * Kevin Chea + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/bootmem.h> +#include <linux/swap.h> + +#include <asm/pgtable.h> +#include <asm/bootparam.h> +#include <asm/mmu_context.h> +#include <asm/tlb.h> +#include <asm/tlbflush.h> +#include <asm/page.h> +#include <asm/pgalloc.h> +#include <asm/pgtable.h> + + +#define DEBUG 0 + +DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); +//static DEFINE_SPINLOCK(tlb_lock); + +/* + * This flag is used to indicate that the page was mapped and modified in + * kernel space, so the cache is probably dirty at that address. + * If cache aliasing is enabled and the page color mismatches, update_mmu_cache + * synchronizes the caches if this bit is set. + */ + +#define PG_cache_clean PG_arch_1 + +/* References to section boundaries */ + +extern char _ftext, _etext, _fdata, _edata, _rodata_end; +extern char __init_begin, __init_end; + +/* + * mem_reserve(start, end, must_exist) + * + * Reserve some memory from the memory pool. + * + * Parameters: + * start Start of region, + * end End of region, + * must_exist Must exist in memory pool. + * + * Returns: + * 0 (memory area couldn't be mapped) + * -1 (success) + */ + +int __init mem_reserve(unsigned long start, unsigned long end, int must_exist) +{ + int i; + + if (start == end) + return 0; + + start = start & PAGE_MASK; + end = PAGE_ALIGN(end); + + for (i = 0; i < sysmem.nr_banks; i++) + if (start < sysmem.bank[i].end + && end >= sysmem.bank[i].start) + break; + + if (i == sysmem.nr_banks) { + if (must_exist) + printk (KERN_WARNING "mem_reserve: [0x%0lx, 0x%0lx) " + "not in any region!\n", start, end); + return 0; + } + + if (start > sysmem.bank[i].start) { + if (end < sysmem.bank[i].end) { + /* split entry */ + if (sysmem.nr_banks >= SYSMEM_BANKS_MAX) + panic("meminfo overflow\n"); + sysmem.bank[sysmem.nr_banks].start = end; + sysmem.bank[sysmem.nr_banks].end = sysmem.bank[i].end; + sysmem.nr_banks++; + } + sysmem.bank[i].end = start; + } else { + if (end < sysmem.bank[i].end) + sysmem.bank[i].start = end; + else { + /* remove entry */ + sysmem.nr_banks--; + sysmem.bank[i].start = sysmem.bank[sysmem.nr_banks].start; + sysmem.bank[i].end = sysmem.bank[sysmem.nr_banks].end; + } + } + return -1; +} + + +/* + * Initialize the bootmem system and give it all the memory we have available. + */ + +void __init bootmem_init(void) +{ + unsigned long pfn; + unsigned long bootmap_start, bootmap_size; + int i; + + max_low_pfn = max_pfn = 0; + min_low_pfn = ~0; + + for (i=0; i < sysmem.nr_banks; i++) { + pfn = PAGE_ALIGN(sysmem.bank[i].start) >> PAGE_SHIFT; + if (pfn < min_low_pfn) + min_low_pfn = pfn; + pfn = PAGE_ALIGN(sysmem.bank[i].end - 1) >> PAGE_SHIFT; + if (pfn > max_pfn) + max_pfn = pfn; + } + + if (min_low_pfn > max_pfn) + panic("No memory found!\n"); + + max_low_pfn = max_pfn < MAX_LOW_MEMORY >> PAGE_SHIFT ? + max_pfn : MAX_LOW_MEMORY >> PAGE_SHIFT; + + /* Find an area to use for the bootmem bitmap. */ + + bootmap_size = bootmem_bootmap_pages(max_low_pfn) << PAGE_SHIFT; + bootmap_start = ~0; + + for (i=0; i<sysmem.nr_banks; i++) + if (sysmem.bank[i].end - sysmem.bank[i].start >= bootmap_size) { + bootmap_start = sysmem.bank[i].start; + break; + } + + if (bootmap_start == ~0UL) + panic("Cannot find %ld bytes for bootmap\n", bootmap_size); + + /* Reserve the bootmem bitmap area */ + + mem_reserve(bootmap_start, bootmap_start + bootmap_size, 1); + bootmap_size = init_bootmem_node(NODE_DATA(0), min_low_pfn, + bootmap_start >> PAGE_SHIFT, + max_low_pfn); + + /* Add all remaining memory pieces into the bootmem map */ + + for (i=0; i<sysmem.nr_banks; i++) + free_bootmem(sysmem.bank[i].start, + sysmem.bank[i].end - sysmem.bank[i].start); + +} + + +void __init paging_init(void) +{ + unsigned long zones_size[MAX_NR_ZONES]; + int i; + + /* All pages are DMA-able, so we put them all in the DMA zone. */ + + zones_size[ZONE_DMA] = max_low_pfn; + for (i = 1; i < MAX_NR_ZONES; i++) + zones_size[i] = 0; + +#ifdef CONFIG_HIGHMEM + zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn; +#endif + + /* Initialize the kernel's page tables. */ + + memset(swapper_pg_dir, 0, PAGE_SIZE); + + free_area_init(zones_size); +} + +/* + * Flush the mmu and reset associated register to default values. + */ + +void __init init_mmu (void) +{ + /* Writing zeros to the <t>TLBCFG special registers ensure + * that valid values exist in the register. For existing + * PGSZID<w> fields, zero selects the first element of the + * page-size array. For nonexistant PGSZID<w> fields, zero is + * the best value to write. Also, when changing PGSZID<w> + * fields, the corresponding TLB must be flushed. + */ + set_itlbcfg_register (0); + set_dtlbcfg_register (0); + flush_tlb_all (); + + /* Set rasid register to a known value. */ + + set_rasid_register (ASID_ALL_RESERVED); + + /* Set PTEVADDR special register to the start of the page + * table, which is in kernel mappable space (ie. not + * statically mapped). This register's value is undefined on + * reset. + */ + set_ptevaddr_register (PGTABLE_START); +} + +/* + * Initialize memory pages. + */ + +void __init mem_init(void) +{ + unsigned long codesize, reservedpages, datasize, initsize; + unsigned long highmemsize, tmp, ram; + + max_mapnr = num_physpages = max_low_pfn; + high_memory = (void *) __va(max_mapnr << PAGE_SHIFT); + highmemsize = 0; + +#if CONFIG_HIGHMEM +#error HIGHGMEM not implemented in init.c +#endif + + totalram_pages += free_all_bootmem(); + + reservedpages = ram = 0; + for (tmp = 0; tmp < max_low_pfn; tmp++) { + ram++; + if (PageReserved(mem_map+tmp)) + reservedpages++; + } + + codesize = (unsigned long) &_etext - (unsigned long) &_ftext; + datasize = (unsigned long) &_edata - (unsigned long) &_fdata; + initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; + + printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, " + "%ldk data, %ldk init %ldk highmem)\n", + (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), + ram << (PAGE_SHIFT-10), + codesize >> 10, + reservedpages << (PAGE_SHIFT-10), + datasize >> 10, + initsize >> 10, + highmemsize >> 10); +} + +void +free_reserved_mem(void *start, void *end) +{ + for (; start < end; start += PAGE_SIZE) { + ClearPageReserved(virt_to_page(start)); + set_page_count(virt_to_page(start), 1); + free_page((unsigned long)start); + totalram_pages++; + } +} + +#ifdef CONFIG_BLK_DEV_INITRD +extern int initrd_is_mapped; + +void free_initrd_mem(unsigned long start, unsigned long end) +{ + if (initrd_is_mapped) { + free_reserved_mem((void*)start, (void*)end); + printk ("Freeing initrd memory: %ldk freed\n",(end-start)>>10); + } +} +#endif + +void free_initmem(void) +{ + free_reserved_mem(&__init_begin, &__init_end); + printk("Freeing unused kernel memory: %dk freed\n", + (&__init_end - &__init_begin) >> 10); +} + +void show_mem(void) +{ + int i, free = 0, total = 0, reserved = 0; + int shared = 0, cached = 0; + + printk("Mem-info:\n"); + show_free_areas(); + printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); + i = max_mapnr; + while (i-- > 0) { + total++; + if (PageReserved(mem_map+i)) + reserved++; + else if (PageSwapCache(mem_map+i)) + cached++; + else if (!page_count(mem_map + i)) + free++; + else + shared += page_count(mem_map + i) - 1; + } + printk("%d pages of RAM\n", total); + printk("%d reserved pages\n", reserved); + printk("%d pages shared\n", shared); + printk("%d pages swap cached\n",cached); + printk("%d free pages\n", free); +} + +/* ------------------------------------------------------------------------- */ + +#if (DCACHE_WAY_SIZE > PAGE_SIZE) + +/* + * With cache aliasing, the page color of the page in kernel space and user + * space might mismatch. We temporarily map the page to a different virtual + * address with the same color and clear the page there. + */ + +void clear_user_page(void *kaddr, unsigned long vaddr, struct page* page) +{ + + /* There shouldn't be any entries for this page. */ + + __flush_invalidate_dcache_page_phys(__pa(page_address(page))); + + if (!PAGE_COLOR_EQ(vaddr, kaddr)) { + unsigned long v, p; + + /* Temporarily map page to DTLB_WAY_DCACHE_ALIAS0. */ + + spin_lock(&tlb_lock); + + p = (unsigned long)pte_val((mk_pte(page,PAGE_KERNEL))); + kaddr = (void*)PAGE_COLOR_MAP0(vaddr); + v = (unsigned long)kaddr | DTLB_WAY_DCACHE_ALIAS0; + __asm__ __volatile__("wdtlb %0,%1; dsync" : :"a" (p), "a" (v)); + + clear_page(kaddr); + + spin_unlock(&tlb_lock); + } else { + clear_page(kaddr); + } + + /* We need to make sure that i$ and d$ are coherent. */ + + clear_bit(PG_cache_clean, &page->flags); +} + +/* + * With cache aliasing, we have to make sure that the page color of the page + * in kernel space matches that of the virtual user address before we read + * the page. If the page color differ, we create a temporary DTLB entry with + * the corrent page color and use this 'temporary' address as the source. + * We then use the same approach as in clear_user_page and copy the data + * to the kernel space and clear the PG_cache_clean bit to synchronize caches + * later. + * + * Note: + * Instead of using another 'way' for the temporary DTLB entry, we could + * probably use the same entry that points to the kernel address (after + * saving the original value and restoring it when we are done). + */ + +void copy_user_page(void* to, void* from, unsigned long vaddr, + struct page* to_page) +{ + /* There shouldn't be any entries for the new page. */ + + __flush_invalidate_dcache_page_phys(__pa(page_address(to_page))); + + spin_lock(&tlb_lock); + + if (!PAGE_COLOR_EQ(vaddr, from)) { + unsigned long v, p, t; + + __asm__ __volatile__ ("pdtlb %1,%2; rdtlb1 %0,%1" + : "=a"(p), "=a"(t) : "a"(from)); + from = (void*)PAGE_COLOR_MAP0(vaddr); + v = (unsigned long)from | DTLB_WAY_DCACHE_ALIAS0; + __asm__ __volatile__ ("wdtlb %0,%1; dsync" ::"a" (p), "a" (v)); + } + + if (!PAGE_COLOR_EQ(vaddr, to)) { + unsigned long v, p; + + p = (unsigned long)pte_val((mk_pte(to_page,PAGE_KERNEL))); + to = (void*)PAGE_COLOR_MAP1(vaddr); + v = (unsigned long)to | DTLB_WAY_DCACHE_ALIAS1; + __asm__ __volatile__ ("wdtlb %0,%1; dsync" ::"a" (p), "a" (v)); + } + copy_page(to, from); + + spin_unlock(&tlb_lock); + + /* We need to make sure that i$ and d$ are coherent. */ + + clear_bit(PG_cache_clean, &to_page->flags); +} + + + +/* + * Any time the kernel writes to a user page cache page, or it is about to + * read from a page cache page this routine is called. + * + * Note: + * The kernel currently only provides one architecture bit in the page + * flags that we use for I$/D$ coherency. Maybe, in future, we can + * use a sepearte bit for deferred dcache aliasing: + * If the page is not mapped yet, we only need to set a flag, + * if mapped, we need to invalidate the page. + */ +// FIXME: we probably need this for WB caches not only for Page Coloring.. + +void flush_dcache_page(struct page *page) +{ + unsigned long addr = __pa(page_address(page)); + struct address_space *mapping = page_mapping(page); + + __flush_invalidate_dcache_page_phys(addr); + + if (!test_bit(PG_cache_clean, &page->flags)) + return; + + /* If this page hasn't been mapped, yet, handle I$/D$ coherency later.*/ +#if 0 + if (mapping && !mapping_mapped(mapping)) + clear_bit(PG_cache_clean, &page->flags); + else +#endif + __invalidate_icache_page_phys(addr); +} + +void flush_cache_range(struct vm_area_struct* vma, unsigned long s, + unsigned long e) +{ + __flush_invalidate_cache_all(); +} + +void flush_cache_page(struct vm_area_struct* vma, unsigned long address, + unsigned long pfn) +{ + struct page *page = pfn_to_page(pfn); + + /* Remove any entry for the old mapping. */ + + if (current->active_mm == vma->vm_mm) { + unsigned long addr = __pa(page_address(page)); + __flush_invalidate_dcache_page_phys(addr); + if ((vma->vm_flags & VM_EXEC) != 0) + __invalidate_icache_page_phys(addr); + } else { + BUG(); + } +} + +#endif /* (DCACHE_WAY_SIZE > PAGE_SIZE) */ + + +pte_t* pte_alloc_one_kernel (struct mm_struct* mm, unsigned long addr) +{ + pte_t* pte = (pte_t*)__get_free_pages(GFP_KERNEL|__GFP_REPEAT, 0); + if (likely(pte)) { + pte_t* ptep = (pte_t*)(pte_val(*pte) + PAGE_OFFSET); + int i; + for (i = 0; i < 1024; i++, ptep++) + pte_clear(mm, addr, ptep); + } + return pte; +} + +struct page* pte_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + struct page *page; + + page = alloc_pages(GFP_KERNEL | __GFP_REPEAT, 0); + + if (likely(page)) { + pte_t* ptep = kmap_atomic(page, KM_USER0); + int i; + + for (i = 0; i < 1024; i++, ptep++) + pte_clear(mm, addr, ptep); + + kunmap_atomic(ptep, KM_USER0); + } + return page; +} + + +/* + * Handle D$/I$ coherency. + * + * Note: + * We only have one architecture bit for the page flags, so we cannot handle + * cache aliasing, yet. + */ + +void +update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t pte) +{ + unsigned long pfn = pte_pfn(pte); + struct page *page; + unsigned long vaddr = addr & PAGE_MASK; + + if (!pfn_valid(pfn)) + return; + + page = pfn_to_page(pfn); + + invalidate_itlb_mapping(addr); + invalidate_dtlb_mapping(addr); + + /* We have a new mapping. Use it. */ + + write_dtlb_entry(pte, dtlb_probe(addr)); + + /* If the processor can execute from this page, synchronize D$/I$. */ + + if ((vma->vm_flags & VM_EXEC) != 0) { + + write_itlb_entry(pte, itlb_probe(addr)); + + /* Synchronize caches, if not clean. */ + + if (!test_and_set_bit(PG_cache_clean, &page->flags)) { + __flush_dcache_page(vaddr); + __invalidate_icache_page(vaddr); + } + } +} + diff --git a/arch/xtensa/mm/misc.S b/arch/xtensa/mm/misc.S new file mode 100644 index 000000000000..327c0f17187c --- /dev/null +++ b/arch/xtensa/mm/misc.S @@ -0,0 +1,374 @@ +/* + * arch/xtensa/mm/misc.S + * + * Miscellaneous assembly functions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + */ + +/* Note: we might want to implement some of the loops as zero-overhead-loops, + * where applicable and if supported by the processor. + */ + +#include <linux/linkage.h> +#include <asm/page.h> +#include <asm/pgtable.h> + +#include <xtensa/cacheasm.h> +#include <xtensa/cacheattrasm.h> + +/* clear_page (page) */ + +ENTRY(clear_page) + entry a1, 16 + addi a4, a2, PAGE_SIZE + movi a3, 0 + +1: s32i a3, a2, 0 + s32i a3, a2, 4 + s32i a3, a2, 8 + s32i a3, a2, 12 + s32i a3, a2, 16 + s32i a3, a2, 20 + s32i a3, a2, 24 + s32i a3, a2, 28 + addi a2, a2, 32 + blt a2, a4, 1b + + retw + +/* + * copy_page (void *to, void *from) + * a2 a3 + */ + +ENTRY(copy_page) + entry a1, 16 + addi a4, a2, PAGE_SIZE + +1: l32i a5, a3, 0 + l32i a6, a3, 4 + l32i a7, a3, 8 + s32i a5, a2, 0 + s32i a6, a2, 4 + s32i a7, a2, 8 + l32i a5, a3, 12 + l32i a6, a3, 16 + l32i a7, a3, 20 + s32i a5, a2, 12 + s32i a6, a2, 16 + s32i a7, a2, 20 + l32i a5, a3, 24 + l32i a6, a3, 28 + s32i a5, a2, 24 + s32i a6, a2, 28 + addi a2, a2, 32 + addi a3, a3, 32 + blt a2, a4, 1b + + retw + + +/* + * void __flush_invalidate_cache_all(void) + */ + +ENTRY(__flush_invalidate_cache_all) + entry sp, 16 + dcache_writeback_inv_all a2, a3 + icache_invalidate_all a2, a3 + retw + +/* + * void __invalidate_icache_all(void) + */ + +ENTRY(__invalidate_icache_all) + entry sp, 16 + icache_invalidate_all a2, a3 + retw + +/* + * void __flush_invalidate_dcache_all(void) + */ + +ENTRY(__flush_invalidate_dcache_all) + entry sp, 16 + dcache_writeback_inv_all a2, a3 + retw + + +/* + * void __flush_invalidate_cache_range(ulong start, ulong size) + */ + +ENTRY(__flush_invalidate_cache_range) + entry sp, 16 + mov a4, a2 + mov a5, a3 + dcache_writeback_inv_region a4, a5, a6 + icache_invalidate_region a2, a3, a4 + retw + +/* + * void __invalidate_icache_page(ulong start) + */ + +ENTRY(__invalidate_icache_page) + entry sp, 16 + movi a3, PAGE_SIZE + icache_invalidate_region a2, a3, a4 + retw + +/* + * void __invalidate_dcache_page(ulong start) + */ + +ENTRY(__invalidate_dcache_page) + entry sp, 16 + movi a3, PAGE_SIZE + dcache_invalidate_region a2, a3, a4 + retw + +/* + * void __invalidate_icache_range(ulong start, ulong size) + */ + +ENTRY(__invalidate_icache_range) + entry sp, 16 + icache_invalidate_region a2, a3, a4 + retw + +/* + * void __invalidate_dcache_range(ulong start, ulong size) + */ + +ENTRY(__invalidate_dcache_range) + entry sp, 16 + dcache_invalidate_region a2, a3, a4 + retw + +/* + * void __flush_dcache_page(ulong start) + */ + +ENTRY(__flush_dcache_page) + entry sp, 16 + movi a3, PAGE_SIZE + dcache_writeback_region a2, a3, a4 + retw + +/* + * void __flush_invalidate_dcache_page(ulong start) + */ + +ENTRY(__flush_invalidate_dcache_page) + entry sp, 16 + movi a3, PAGE_SIZE + dcache_writeback_inv_region a2, a3, a4 + retw + +/* + * void __flush_invalidate_dcache_range(ulong start, ulong size) + */ + +ENTRY(__flush_invalidate_dcache_range) + entry sp, 16 + dcache_writeback_inv_region a2, a3, a4 + retw + +/* + * void __invalidate_dcache_all(void) + */ + +ENTRY(__invalidate_dcache_all) + entry sp, 16 + dcache_invalidate_all a2, a3 + retw + +/* + * void __flush_invalidate_dcache_page_phys(ulong start) + */ + +ENTRY(__flush_invalidate_dcache_page_phys) + entry sp, 16 + + movi a3, XCHAL_DCACHE_SIZE + movi a4, PAGE_MASK | 1 + addi a2, a2, 1 + +1: addi a3, a3, -XCHAL_DCACHE_LINESIZE + + ldct a6, a3 + dsync + and a6, a6, a4 + beq a6, a2, 2f + bgeui a3, 2, 1b + retw + +2: diwbi a3, 0 + bgeui a3, 2, 1b + retw + +ENTRY(check_dcache_low0) + entry sp, 16 + + movi a3, XCHAL_DCACHE_SIZE / 4 + movi a4, PAGE_MASK | 1 + addi a2, a2, 1 + +1: addi a3, a3, -XCHAL_DCACHE_LINESIZE + + ldct a6, a3 + dsync + and a6, a6, a4 + beq a6, a2, 2f + bgeui a3, 2, 1b + retw + +2: j 2b + +ENTRY(check_dcache_high0) + entry sp, 16 + + movi a5, XCHAL_DCACHE_SIZE / 4 + movi a3, XCHAL_DCACHE_SIZE / 2 + movi a4, PAGE_MASK | 1 + addi a2, a2, 1 + +1: addi a3, a3, -XCHAL_DCACHE_LINESIZE + addi a5, a5, -XCHAL_DCACHE_LINESIZE + + ldct a6, a3 + dsync + and a6, a6, a4 + beq a6, a2, 2f + bgeui a5, 2, 1b + retw + +2: j 2b + +ENTRY(check_dcache_low1) + entry sp, 16 + + movi a5, XCHAL_DCACHE_SIZE / 4 + movi a3, XCHAL_DCACHE_SIZE * 3 / 4 + movi a4, PAGE_MASK | 1 + addi a2, a2, 1 + +1: addi a3, a3, -XCHAL_DCACHE_LINESIZE + addi a5, a5, -XCHAL_DCACHE_LINESIZE + + ldct a6, a3 + dsync + and a6, a6, a4 + beq a6, a2, 2f + bgeui a5, 2, 1b + retw + +2: j 2b + +ENTRY(check_dcache_high1) + entry sp, 16 + + movi a5, XCHAL_DCACHE_SIZE / 4 + movi a3, XCHAL_DCACHE_SIZE + movi a4, PAGE_MASK | 1 + addi a2, a2, 1 + +1: addi a3, a3, -XCHAL_DCACHE_LINESIZE + addi a5, a5, -XCHAL_DCACHE_LINESIZE + + ldct a6, a3 + dsync + and a6, a6, a4 + beq a6, a2, 2f + bgeui a5, 2, 1b + retw + +2: j 2b + + +/* + * void __invalidate_icache_page_phys(ulong start) + */ + +ENTRY(__invalidate_icache_page_phys) + entry sp, 16 + + movi a3, XCHAL_ICACHE_SIZE + movi a4, PAGE_MASK | 1 + addi a2, a2, 1 + +1: addi a3, a3, -XCHAL_ICACHE_LINESIZE + + lict a6, a3 + isync + and a6, a6, a4 + beq a6, a2, 2f + bgeui a3, 2, 1b + retw + +2: iii a3, 0 + bgeui a3, 2, 1b + retw + + +#if 0 + + movi a3, XCHAL_DCACHE_WAYS - 1 + movi a4, PAGE_SIZE + +1: mov a5, a2 + add a6, a2, a4 + +2: diwbi a5, 0 + diwbi a5, XCHAL_DCACHE_LINESIZE + diwbi a5, XCHAL_DCACHE_LINESIZE * 2 + diwbi a5, XCHAL_DCACHE_LINESIZE * 3 + + addi a5, a5, XCHAL_DCACHE_LINESIZE * 4 + blt a5, a6, 2b + + addi a3, a3, -1 + addi a2, a2, XCHAL_DCACHE_SIZE / XCHAL_DCACHE_WAYS + bgez a3, 1b + + retw + +ENTRY(__invalidate_icache_page_index) + entry sp, 16 + + movi a3, XCHAL_ICACHE_WAYS - 1 + movi a4, PAGE_SIZE + +1: mov a5, a2 + add a6, a2, a4 + +2: iii a5, 0 + iii a5, XCHAL_ICACHE_LINESIZE + iii a5, XCHAL_ICACHE_LINESIZE * 2 + iii a5, XCHAL_ICACHE_LINESIZE * 3 + + addi a5, a5, XCHAL_ICACHE_LINESIZE * 4 + blt a5, a6, 2b + + addi a3, a3, -1 + addi a2, a2, XCHAL_ICACHE_SIZE / XCHAL_ICACHE_WAYS + bgez a3, 2b + + retw + +#endif + + + + + + diff --git a/arch/xtensa/mm/pgtable.c b/arch/xtensa/mm/pgtable.c new file mode 100644 index 000000000000..e5e119c820e4 --- /dev/null +++ b/arch/xtensa/mm/pgtable.c @@ -0,0 +1,76 @@ +/* + * arch/xtensa/mm/fault.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + */ + +#if (DCACHE_SIZE > PAGE_SIZE) + +pte_t* pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) +{ + pte_t *pte, p; + int color = ADDR_COLOR(address); + int i; + + p = (pte_t*) __get_free_pages(GFP_KERNEL|__GFP_REPEAT, COLOR_ORDER); + + if (likely(p)) { + struct page *page; + + for (i = 0; i < COLOR_SIZE; i++, p++) { + page = virt_to_page(pte); + + set_page_count(page, 1); + ClearPageCompound(page); + + if (ADDR_COLOR(p) == color) + pte = p; + else + free_page(p); + } + clear_page(pte); + } + return pte; +} + +#ifdef PROFILING + +int mask; +int hit; +int flush; + +#endif + +struct page* pte_alloc_one(struct mm_struct *mm, unsigned long address) +{ + struct page *page, p; + int color = ADDR_COLOR(address); + + p = alloc_pages(GFP_KERNEL | __GFP_REPEAT, PTE_ORDER); + + if (likely(p)) { + for (i = 0; i < PAGE_ORDER; i++) { + set_page_count(p, 1); + ClearPageCompound(p); + + if (PADDR_COLOR(page_address(pg)) == color) + page = p; + else + free_page(p); + } + clear_highpage(page); + } + + return page; +} + +#endif + + + diff --git a/arch/xtensa/mm/tlb.c b/arch/xtensa/mm/tlb.c new file mode 100644 index 000000000000..d3bd3bfc3b3b --- /dev/null +++ b/arch/xtensa/mm/tlb.c @@ -0,0 +1,545 @@ +/* + * arch/xtensa/mm/mmu.c + * + * Logic that manipulates the Xtensa MMU. Derived from MIPS. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2003 Tensilica Inc. + * + * Joe Taylor + * Chris Zankel <chris@zankel.net> + * Marc Gauthier + */ + +#include <linux/mm.h> +#include <asm/processor.h> +#include <asm/mmu_context.h> +#include <asm/tlbflush.h> +#include <asm/system.h> +#include <asm/cacheflush.h> + + +static inline void __flush_itlb_all (void) +{ + int way, index; + + for (way = 0; way < XCHAL_ITLB_ARF_WAYS; way++) { + for (index = 0; index < ITLB_ENTRIES_PER_ARF_WAY; index++) { + int entry = way + (index << PAGE_SHIFT); + invalidate_itlb_entry_no_isync (entry); + } + } + asm volatile ("isync\n"); +} + +static inline void __flush_dtlb_all (void) +{ + int way, index; + + for (way = 0; way < XCHAL_DTLB_ARF_WAYS; way++) { + for (index = 0; index < DTLB_ENTRIES_PER_ARF_WAY; index++) { + int entry = way + (index << PAGE_SHIFT); + invalidate_dtlb_entry_no_isync (entry); + } + } + asm volatile ("isync\n"); +} + + +void flush_tlb_all (void) +{ + __flush_itlb_all(); + __flush_dtlb_all(); +} + +/* If mm is current, we simply assign the current task a new ASID, thus, + * invalidating all previous tlb entries. If mm is someone else's user mapping, + * wie invalidate the context, thus, when that user mapping is swapped in, + * a new context will be assigned to it. + */ + +void flush_tlb_mm(struct mm_struct *mm) +{ +#if 0 + printk("[tlbmm<%lx>]\n", (unsigned long)mm->context); +#endif + + if (mm == current->active_mm) { + int flags; + local_save_flags(flags); + get_new_mmu_context(mm, asid_cache); + set_rasid_register(ASID_INSERT(mm->context)); + local_irq_restore(flags); + } + else + mm->context = 0; +} + +void flush_tlb_range (struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + struct mm_struct *mm = vma->vm_mm; + unsigned long flags; + + if (mm->context == NO_CONTEXT) + return; + +#if 0 + printk("[tlbrange<%02lx,%08lx,%08lx>]\n", + (unsigned long)mm->context, start, end); +#endif + local_save_flags(flags); + + if (end-start + (PAGE_SIZE-1) <= SMALLEST_NTLB_ENTRIES << PAGE_SHIFT) { + int oldpid = get_rasid_register(); + set_rasid_register (ASID_INSERT(mm->context)); + start &= PAGE_MASK; + if (vma->vm_flags & VM_EXEC) + while(start < end) { + invalidate_itlb_mapping(start); + invalidate_dtlb_mapping(start); + start += PAGE_SIZE; + } + else + while(start < end) { + invalidate_dtlb_mapping(start); + start += PAGE_SIZE; + } + + set_rasid_register(oldpid); + } else { + get_new_mmu_context(mm, asid_cache); + if (mm == current->active_mm) + set_rasid_register(ASID_INSERT(mm->context)); + } + local_irq_restore(flags); +} + +void flush_tlb_page (struct vm_area_struct *vma, unsigned long page) +{ + struct mm_struct* mm = vma->vm_mm; + unsigned long flags; + int oldpid; +#if 0 + printk("[tlbpage<%02lx,%08lx>]\n", + (unsigned long)mm->context, page); +#endif + + if(mm->context == NO_CONTEXT) + return; + + local_save_flags(flags); + + oldpid = get_rasid_register(); + + if (vma->vm_flags & VM_EXEC) + invalidate_itlb_mapping(page); + invalidate_dtlb_mapping(page); + + set_rasid_register(oldpid); + + local_irq_restore(flags); + +#if 0 + flush_tlb_all(); + return; +#endif +} + + +#ifdef DEBUG_TLB + +#define USE_ITLB 0 +#define USE_DTLB 1 + +struct way_config_t { + int indicies; + int indicies_log2; + int pgsz_log2; + int arf; +}; + +static struct way_config_t itlb[XCHAL_ITLB_WAYS] = +{ + { XCHAL_ITLB_SET(XCHAL_ITLB_WAY0_SET, ENTRIES), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY0_SET, ENTRIES_LOG2), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY0_SET, PAGESZ_LOG2_MIN), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY0_SET, ARF) + }, + { XCHAL_ITLB_SET(XCHAL_ITLB_WAY1_SET, ENTRIES), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY1_SET, ENTRIES_LOG2), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY1_SET, PAGESZ_LOG2_MIN), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY1_SET, ARF) + }, + { XCHAL_ITLB_SET(XCHAL_ITLB_WAY2_SET, ENTRIES), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY2_SET, ENTRIES_LOG2), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY2_SET, PAGESZ_LOG2_MIN), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY2_SET, ARF) + }, + { XCHAL_ITLB_SET(XCHAL_ITLB_WAY3_SET, ENTRIES), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY3_SET, ENTRIES_LOG2), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY3_SET, PAGESZ_LOG2_MIN), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY3_SET, ARF) + }, + { XCHAL_ITLB_SET(XCHAL_ITLB_WAY4_SET, ENTRIES), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY4_SET, ENTRIES_LOG2), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY4_SET, PAGESZ_LOG2_MIN), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY4_SET, ARF) + }, + { XCHAL_ITLB_SET(XCHAL_ITLB_WAY5_SET, ENTRIES), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY5_SET, ENTRIES_LOG2), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY5_SET, PAGESZ_LOG2_MIN), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY5_SET, ARF) + }, + { XCHAL_ITLB_SET(XCHAL_ITLB_WAY6_SET, ENTRIES), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY6_SET, ENTRIES_LOG2), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY6_SET, PAGESZ_LOG2_MIN), + XCHAL_ITLB_SET(XCHAL_ITLB_WAY6_SET, ARF) + } +}; + +static struct way_config_t dtlb[XCHAL_DTLB_WAYS] = +{ + { XCHAL_DTLB_SET(XCHAL_DTLB_WAY0_SET, ENTRIES), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY0_SET, ENTRIES_LOG2), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY0_SET, PAGESZ_LOG2_MIN), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY0_SET, ARF) + }, + { XCHAL_DTLB_SET(XCHAL_DTLB_WAY1_SET, ENTRIES), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY1_SET, ENTRIES_LOG2), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY1_SET, PAGESZ_LOG2_MIN), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY1_SET, ARF) + }, + { XCHAL_DTLB_SET(XCHAL_DTLB_WAY2_SET, ENTRIES), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY2_SET, ENTRIES_LOG2), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY2_SET, PAGESZ_LOG2_MIN), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY2_SET, ARF) + }, + { XCHAL_DTLB_SET(XCHAL_DTLB_WAY3_SET, ENTRIES), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY3_SET, ENTRIES_LOG2), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY3_SET, PAGESZ_LOG2_MIN), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY3_SET, ARF) + }, + { XCHAL_DTLB_SET(XCHAL_DTLB_WAY4_SET, ENTRIES), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY4_SET, ENTRIES_LOG2), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY4_SET, PAGESZ_LOG2_MIN), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY4_SET, ARF) + }, + { XCHAL_DTLB_SET(XCHAL_DTLB_WAY5_SET, ENTRIES), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY5_SET, ENTRIES_LOG2), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY5_SET, PAGESZ_LOG2_MIN), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY5_SET, ARF) + }, + { XCHAL_DTLB_SET(XCHAL_DTLB_WAY6_SET, ENTRIES), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY6_SET, ENTRIES_LOG2), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY6_SET, PAGESZ_LOG2_MIN), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY6_SET, ARF) + }, + { XCHAL_DTLB_SET(XCHAL_DTLB_WAY7_SET, ENTRIES), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY7_SET, ENTRIES_LOG2), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY7_SET, PAGESZ_LOG2_MIN), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY7_SET, ARF) + }, + { XCHAL_DTLB_SET(XCHAL_DTLB_WAY8_SET, ENTRIES), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY8_SET, ENTRIES_LOG2), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY8_SET, PAGESZ_LOG2_MIN), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY8_SET, ARF) + }, + { XCHAL_DTLB_SET(XCHAL_DTLB_WAY9_SET, ENTRIES), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY9_SET, ENTRIES_LOG2), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY9_SET, PAGESZ_LOG2_MIN), + XCHAL_DTLB_SET(XCHAL_DTLB_WAY9_SET, ARF) + } +}; + +/* Total number of entries: */ +#define ITLB_TOTAL_ENTRIES \ + XCHAL_ITLB_SET(XCHAL_ITLB_WAY0_SET, ENTRIES) + \ + XCHAL_ITLB_SET(XCHAL_ITLB_WAY1_SET, ENTRIES) + \ + XCHAL_ITLB_SET(XCHAL_ITLB_WAY2_SET, ENTRIES) + \ + XCHAL_ITLB_SET(XCHAL_ITLB_WAY3_SET, ENTRIES) + \ + XCHAL_ITLB_SET(XCHAL_ITLB_WAY4_SET, ENTRIES) + \ + XCHAL_ITLB_SET(XCHAL_ITLB_WAY5_SET, ENTRIES) + \ + XCHAL_ITLB_SET(XCHAL_ITLB_WAY6_SET, ENTRIES) +#define DTLB_TOTAL_ENTRIES \ + XCHAL_DTLB_SET(XCHAL_DTLB_WAY0_SET, ENTRIES) + \ + XCHAL_DTLB_SET(XCHAL_DTLB_WAY1_SET, ENTRIES) + \ + XCHAL_DTLB_SET(XCHAL_DTLB_WAY2_SET, ENTRIES) + \ + XCHAL_DTLB_SET(XCHAL_DTLB_WAY3_SET, ENTRIES) + \ + XCHAL_DTLB_SET(XCHAL_DTLB_WAY4_SET, ENTRIES) + \ + XCHAL_DTLB_SET(XCHAL_DTLB_WAY5_SET, ENTRIES) + \ + XCHAL_DTLB_SET(XCHAL_DTLB_WAY6_SET, ENTRIES) + \ + XCHAL_DTLB_SET(XCHAL_DTLB_WAY7_SET, ENTRIES) + \ + XCHAL_DTLB_SET(XCHAL_DTLB_WAY8_SET, ENTRIES) + \ + XCHAL_DTLB_SET(XCHAL_DTLB_WAY9_SET, ENTRIES) + + +typedef struct { + unsigned va; + unsigned pa; + unsigned char asid; + unsigned char ca; + unsigned char way; + unsigned char index; + unsigned char pgsz_log2; /* 0 .. 32 */ + unsigned char type; /* 0=ITLB 1=DTLB */ +} tlb_dump_entry_t; + +/* Return -1 if a precedes b, +1 if a follows b, 0 if same: */ +int cmp_tlb_dump_info( tlb_dump_entry_t *a, tlb_dump_entry_t *b ) +{ + if (a->asid < b->asid) return -1; + if (a->asid > b->asid) return 1; + if (a->va < b->va) return -1; + if (a->va > b->va) return 1; + if (a->pa < b->pa) return -1; + if (a->pa > b->pa) return 1; + if (a->ca < b->ca) return -1; + if (a->ca > b->ca) return 1; + if (a->way < b->way) return -1; + if (a->way > b->way) return 1; + if (a->index < b->index) return -1; + if (a->index > b->index) return 1; + return 0; +} + +void sort_tlb_dump_info( tlb_dump_entry_t *t, int n ) +{ + int i, j; + /* Simple O(n*n) sort: */ + for (i = 0; i < n-1; i++) + for (j = i+1; j < n; j++) + if (cmp_tlb_dump_info(t+i, t+j) > 0) { + tlb_dump_entry_t tmp = t[i]; + t[i] = t[j]; + t[j] = tmp; + } +} + + +static tlb_dump_entry_t itlb_dump_info[ITLB_TOTAL_ENTRIES]; +static tlb_dump_entry_t dtlb_dump_info[DTLB_TOTAL_ENTRIES]; + + +static inline char *way_type (int type) +{ + return type ? "autorefill" : "non-autorefill"; +} + +void print_entry (struct way_config_t *way_info, + unsigned int way, + unsigned int index, + unsigned int virtual, + unsigned int translation) +{ + char valid_chr; + unsigned int va, pa, asid, ca; + + va = virtual & + ~((1 << (way_info->pgsz_log2 + way_info->indicies_log2)) - 1); + asid = virtual & ((1 << XCHAL_MMU_ASID_BITS) - 1); + pa = translation & ~((1 << way_info->pgsz_log2) - 1); + ca = translation & ((1 << XCHAL_MMU_CA_BITS) - 1); + valid_chr = asid ? 'V' : 'I'; + + /* Compute and incorporate the effect of the index bits on the + * va. It's more useful for kernel debugging, since we always + * want to know the effective va anyway. */ + + va += index << way_info->pgsz_log2; + + printk ("\t[%d,%d] (%c) vpn 0x%.8x ppn 0x%.8x asid 0x%.2x am 0x%x\n", + way, index, valid_chr, va, pa, asid, ca); +} + +void print_itlb_entry (struct way_config_t *way_info, int way, int index) +{ + print_entry (way_info, way, index, + read_itlb_virtual (way + (index << way_info->pgsz_log2)), + read_itlb_translation (way + (index << way_info->pgsz_log2))); +} + +void print_dtlb_entry (struct way_config_t *way_info, int way, int index) +{ + print_entry (way_info, way, index, + read_dtlb_virtual (way + (index << way_info->pgsz_log2)), + read_dtlb_translation (way + (index << way_info->pgsz_log2))); +} + +void dump_itlb (void) +{ + int way, index; + + printk ("\nITLB: ways = %d\n", XCHAL_ITLB_WAYS); + + for (way = 0; way < XCHAL_ITLB_WAYS; way++) { + printk ("\nWay: %d, Entries: %d, MinPageSize: %d, Type: %s\n", + way, itlb[way].indicies, + itlb[way].pgsz_log2, way_type(itlb[way].arf)); + for (index = 0; index < itlb[way].indicies; index++) { + print_itlb_entry(&itlb[way], way, index); + } + } +} + +void dump_dtlb (void) +{ + int way, index; + + printk ("\nDTLB: ways = %d\n", XCHAL_DTLB_WAYS); + + for (way = 0; way < XCHAL_DTLB_WAYS; way++) { + printk ("\nWay: %d, Entries: %d, MinPageSize: %d, Type: %s\n", + way, dtlb[way].indicies, + dtlb[way].pgsz_log2, way_type(dtlb[way].arf)); + for (index = 0; index < dtlb[way].indicies; index++) { + print_dtlb_entry(&dtlb[way], way, index); + } + } +} + +void dump_tlb (tlb_dump_entry_t *tinfo, struct way_config_t *config, + int entries, int ways, int type, int show_invalid) +{ + tlb_dump_entry_t *e = tinfo; + int way, i; + + /* Gather all info: */ + for (way = 0; way < ways; way++) { + struct way_config_t *cfg = config + way; + for (i = 0; i < cfg->indicies; i++) { + unsigned wayindex = way + (i << cfg->pgsz_log2); + unsigned vv = (type ? read_dtlb_virtual (wayindex) + : read_itlb_virtual (wayindex)); + unsigned pp = (type ? read_dtlb_translation (wayindex) + : read_itlb_translation (wayindex)); + + /* Compute and incorporate the effect of the index bits on the + * va. It's more useful for kernel debugging, since we always + * want to know the effective va anyway. */ + + e->va = (vv & ~((1 << (cfg->pgsz_log2 + cfg->indicies_log2)) - 1)); + e->va += (i << cfg->pgsz_log2); + e->pa = (pp & ~((1 << cfg->pgsz_log2) - 1)); + e->asid = (vv & ((1 << XCHAL_MMU_ASID_BITS) - 1)); + e->ca = (pp & ((1 << XCHAL_MMU_CA_BITS) - 1)); + e->way = way; + e->index = i; + e->pgsz_log2 = cfg->pgsz_log2; + e->type = type; + e++; + } + } +#if 1 + /* Sort by ASID and VADDR: */ + sort_tlb_dump_info (tinfo, entries); +#endif + + /* Display all sorted info: */ + printk ("\n%cTLB dump:\n", (type ? 'D' : 'I')); + for (e = tinfo, i = 0; i < entries; i++, e++) { +#if 0 + if (e->asid == 0 && !show_invalid) + continue; +#endif + printk ("%c way=%d i=%d ASID=%02X V=%08X -> P=%08X CA=%X (%d %cB)\n", + (e->type ? 'D' : 'I'), e->way, e->index, + e->asid, e->va, e->pa, e->ca, + (1 << (e->pgsz_log2 % 10)), + " kMG"[e->pgsz_log2 / 10] + ); + } +} + +void dump_tlbs2 (int showinv) +{ + dump_tlb (itlb_dump_info, itlb, ITLB_TOTAL_ENTRIES, XCHAL_ITLB_WAYS, 0, showinv); + dump_tlb (dtlb_dump_info, dtlb, DTLB_TOTAL_ENTRIES, XCHAL_DTLB_WAYS, 1, showinv); +} + +void dump_all_tlbs (void) +{ + dump_tlbs2 (1); +} + +void dump_valid_tlbs (void) +{ + dump_tlbs2 (0); +} + + +void dump_tlbs (void) +{ + dump_itlb(); + dump_dtlb(); +} + +void dump_cache_tag(int dcache, int idx) +{ + int w, i, s, e; + unsigned long tag, index; + unsigned long num_lines, num_ways, cache_size, line_size; + + num_ways = dcache ? XCHAL_DCACHE_WAYS : XCHAL_ICACHE_WAYS; + cache_size = dcache ? XCHAL_DCACHE_SIZE : XCHAL_ICACHE_SIZE; + line_size = dcache ? XCHAL_DCACHE_LINESIZE : XCHAL_ICACHE_LINESIZE; + + num_lines = cache_size / num_ways; + + s = 0; e = num_lines; + + if (idx >= 0) + e = (s = idx * line_size) + 1; + + for (i = s; i < e; i+= line_size) { + printk("\nline %#08x:", i); + for (w = 0; w < num_ways; w++) { + index = w * num_lines + i; + if (dcache) + __asm__ __volatile__("ldct %0, %1\n\t" + : "=a"(tag) : "a"(index)); + else + __asm__ __volatile__("lict %0, %1\n\t" + : "=a"(tag) : "a"(index)); + + printk(" %#010lx", tag); + } + } + printk ("\n"); +} + +void dump_icache(int index) +{ + unsigned long data, addr; + int w, i; + + const unsigned long num_ways = XCHAL_ICACHE_WAYS; + const unsigned long cache_size = XCHAL_ICACHE_SIZE; + const unsigned long line_size = XCHAL_ICACHE_LINESIZE; + const unsigned long num_lines = cache_size / num_ways / line_size; + + for (w = 0; w < num_ways; w++) { + printk ("\nWay %d", w); + + for (i = 0; i < line_size; i+= 4) { + addr = w * num_lines + index * line_size + i; + __asm__ __volatile__("licw %0, %1\n\t" + : "=a"(data) : "a"(addr)); + printk(" %#010lx", data); + } + } + printk ("\n"); +} + +void dump_cache_tags(void) +{ + printk("Instruction cache\n"); + dump_cache_tag(0, -1); + printk("Data cache\n"); + dump_cache_tag(1, -1); +} + +#endif diff --git a/arch/xtensa/platform-iss/Makefile b/arch/xtensa/platform-iss/Makefile new file mode 100644 index 000000000000..5b394e9620e5 --- /dev/null +++ b/arch/xtensa/platform-iss/Makefile @@ -0,0 +1,13 @@ +# $Id: Makefile,v 1.1.1.1 2002/08/28 16:10:14 aroll Exp $ +# +# Makefile for the Xtensa Instruction Set Simulator (ISS) +# "prom monitor" library routines under Linux. +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). +# +# Note 2! The CFLAGS definitions are in the main makefile... + +obj-y = io.o console.o setup.o network.o + diff --git a/arch/xtensa/platform-iss/console.c b/arch/xtensa/platform-iss/console.c new file mode 100644 index 000000000000..4fbddf92a921 --- /dev/null +++ b/arch/xtensa/platform-iss/console.c @@ -0,0 +1,300 @@ +/* + * arch/xtensa/platform-iss/console.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001-2005 Tensilica Inc. + * Authors Christian Zankel, Joe Taylor + */ + +#include <linux/module.h> +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/console.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/major.h> +#include <linux/param.h> +#include <linux/serial.h> +#include <linux/serialP.h> +#include <linux/console.h> + +#include <asm/uaccess.h> +#include <asm/irq.h> + +#include <xtensa/simcall.h> + +#include <linux/tty.h> +#include <linux/tty_flip.h> + +#ifdef SERIAL_INLINE +#define _INLINE_ inline +#endif + +#define SERIAL_MAX_NUM_LINES 1 +#define SERIAL_TIMER_VALUE (20 * HZ) + +static struct tty_driver *serial_driver; +static struct timer_list serial_timer; + +static DEFINE_SPINLOCK(timer_lock); + +int errno; + +static int __simc (int a, int b, int c, int d, int e, int f) +{ + int ret; + __asm__ __volatile__ ("simcall\n" + "mov %0, a2\n" + "mov %1, a3\n" : "=a" (ret), "=a" (errno) + : : "a2", "a3"); + return ret; +} + +static char *serial_version = "0.1"; +static char *serial_name = "ISS serial driver"; + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its async structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ + +static void rs_poll(unsigned long); + +static int rs_open(struct tty_struct *tty, struct file * filp) +{ + int line = tty->index; + + if ((line < 0) || (line >= SERIAL_MAX_NUM_LINES)) + return -ENODEV; + + spin_lock(&timer_lock); + + if (tty->count == 1) { + init_timer(&serial_timer); + serial_timer.data = (unsigned long) tty; + serial_timer.function = rs_poll; + mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE); + } + spin_unlock(&timer_lock); + + return 0; +} + + +/* + * ------------------------------------------------------------ + * iss_serial_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * async structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void rs_close(struct tty_struct *tty, struct file * filp) +{ + spin_lock(&timer_lock); + if (tty->count == 1) + del_timer_sync(&serial_timer); + spin_unlock(&timer_lock); +} + + +static int rs_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + /* see drivers/char/serialX.c to reference original version */ + + __simc (SYS_write, 1, (unsigned long)buf, count, 0, 0); + return count; +} + +static void rs_poll(unsigned long priv) +{ + struct tty_struct* tty = (struct tty_struct*) priv; + + struct timeval tv = { .tv_sec = 0, .tv_usec = 0 }; + int i = 0; + unsigned char c; + + spin_lock(&timer_lock); + + while (__simc(SYS_select_one, 0, XTISS_SELECT_ONE_READ, (int)&tv,0,0)){ + __simc (SYS_read, 0, (unsigned long)&c, 1, 0, 0); + tty->flip.count++; + *tty->flip.char_buf_ptr++ = c; + *tty->flip.flag_buf_ptr++ = TTY_NORMAL; + i++; + } + + if (i) + tty_flip_buffer_push(tty); + + + mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE); + spin_unlock(&timer_lock); +} + + +static void rs_put_char(struct tty_struct *tty, unsigned char ch) +{ + char buf[2]; + + if (!tty) + return; + + buf[0] = ch; + buf[1] = '\0'; /* Is this NULL necessary? */ + __simc (SYS_write, 1, (unsigned long) buf, 1, 0, 0); +} + +static void rs_flush_chars(struct tty_struct *tty) +{ +} + +static int rs_write_room(struct tty_struct *tty) +{ + /* Let's say iss can always accept 2K characters.. */ + return 2 * 1024; +} + +static int rs_chars_in_buffer(struct tty_struct *tty) +{ + /* the iss doesn't buffer characters */ + return 0; +} + +static void rs_hangup(struct tty_struct *tty) +{ + /* Stub, once again.. */ +} + +static void rs_wait_until_sent(struct tty_struct *tty, int timeout) +{ + /* Stub, once again.. */ +} + +static int rs_read_proc(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + int len = 0; + off_t begin = 0; + + len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version); + *eof = 1; + + if (off >= len + begin) + return 0; + + *start = page + (off - begin); + return ((count < begin + len - off) ? count : begin + len - off); +} + + +static struct tty_operations serial_ops = { + .open = rs_open, + .close = rs_close, + .write = rs_write, + .put_char = rs_put_char, + .flush_chars = rs_flush_chars, + .write_room = rs_write_room, + .chars_in_buffer = rs_chars_in_buffer, + .hangup = rs_hangup, + .wait_until_sent = rs_wait_until_sent, + .read_proc = rs_read_proc +}; + +int __init rs_init(void) +{ + serial_driver = alloc_tty_driver(1); + + printk ("%s %s\n", serial_name, serial_version); + + /* Initialize the tty_driver structure */ + + serial_driver->owner = THIS_MODULE; + serial_driver->driver_name = "iss_serial"; + serial_driver->name = "ttyS"; + serial_driver->major = TTY_MAJOR; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + + tty_set_operations(serial_driver, &serial_ops); + + if (tty_register_driver(serial_driver)) + panic("Couldn't register serial driver\n"); + return 0; +} + + +static __exit void rs_exit(void) +{ + int error; + + if ((error = tty_unregister_driver(serial_driver))) + printk("ISS_SERIAL: failed to unregister serial driver (%d)\n", + error); + put_tty_driver(serial_driver); +} + + +/* We use `late_initcall' instead of just `__initcall' as a workaround for + * the fact that (1) simcons_tty_init can't be called before tty_init, + * (2) tty_init is called via `module_init', (3) if statically linked, + * module_init == device_init, and (4) there's no ordering of init lists. + * We can do this easily because simcons is always statically linked, but + * other tty drivers that depend on tty_init and which must use + * `module_init' to declare their init routines are likely to be broken. + */ + +late_initcall(rs_init); + + +#ifdef CONFIG_SERIAL_CONSOLE + +static void iss_console_write(struct console *co, const char *s, unsigned count) +{ + int len = strlen(s); + + if (s != 0 && *s != 0) + __simc (SYS_write, 1, (unsigned long)s, + count < len ? count : len,0,0); +} + +static struct tty_driver* iss_console_device(struct console *c, int *index) +{ + *index = c->index; + return serial_driver; +} + + +static struct console sercons = { + .name = "ttyS", + .write = iss_console_write, + .device = iss_console_device, + .flags = CON_PRINTBUFFER, + .index = -1 +}; + +static int __init iss_console_init(void) +{ + register_console(&sercons); + return 0; +} + +console_initcall(iss_console_init); + +#endif /* CONFIG_SERIAL_CONSOLE */ + diff --git a/arch/xtensa/platform-iss/io.c b/arch/xtensa/platform-iss/io.c new file mode 100644 index 000000000000..5b161a5cb65f --- /dev/null +++ b/arch/xtensa/platform-iss/io.c @@ -0,0 +1,32 @@ +/* This file isn't really needed right now. */ + +#if 0 + +#include <asm/io.h> +#include <xtensa/simcall.h> + +extern int __simc (); + + +char iss_serial_getc() +{ + char c; + __simc( SYS_read, 0, &c, 1 ); + return c; +} + +void iss_serial_putc( char c ) +{ + __simc( SYS_write, 1, &c, 1 ); +} + +void iss_serial_puts( char *s ) +{ + if( s != 0 && *s != 0 ) + __simc( SYS_write, 1, s, strlen(s) ); +} + +/*#error Need I/O ports to specific hardware!*/ + +#endif + diff --git a/arch/xtensa/platform-iss/network.c b/arch/xtensa/platform-iss/network.c new file mode 100644 index 000000000000..498d7dced1f4 --- /dev/null +++ b/arch/xtensa/platform-iss/network.c @@ -0,0 +1,855 @@ +/* + * + * arch/xtensa/platform-iss/network.c + * + * Platform specific initialization. + * + * Authors: Chris Zankel <chris@zankel.net> + * Based on work form the UML team. + * + * Copyright 2005 Tensilica Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/config.h> +#include <linux/list.h> +#include <linux/irq.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <linux/if_ether.h> +#include <linux/inetdevice.h> +#include <linux/init.h> +#include <linux/if_tun.h> +#include <linux/etherdevice.h> +#include <linux/interrupt.h> +#include <linux/ioctl.h> +#include <linux/bootmem.h> +#include <linux/ethtool.h> +#include <linux/rtnetlink.h> +#include <linux/timer.h> + +#include <xtensa/simcall.h> + +#define DRIVER_NAME "iss-netdev" +#define ETH_MAX_PACKET 1500 +#define ETH_HEADER_OTHER 14 +#define ISS_NET_TIMER_VALUE (2 * HZ) + + +static DEFINE_SPINLOCK(opened_lock); +static LIST_HEAD(opened); + +static DEFINE_SPINLOCK(devices_lock); +static LIST_HEAD(devices); + +/* ------------------------------------------------------------------------- */ + +/* We currently only support the TUNTAP transport protocol. */ + +#define TRANSPORT_TUNTAP_NAME "tuntap" +#define TRANSPORT_TUNTAP_MTU ETH_MAX_PACKET + +struct tuntap_info { + char dev_name[IFNAMSIZ]; + int fixed_config; + unsigned char gw[ETH_ALEN]; + int fd; +}; + +/* ------------------------------------------------------------------------- */ + + +/* This structure contains out private information for the driver. */ + +struct iss_net_private { + + struct list_head device_list; + struct list_head opened_list; + + spinlock_t lock; + struct net_device *dev; + struct platform_device pdev; + struct timer_list tl; + struct net_device_stats stats; + + struct timer_list timer; + unsigned int timer_val; + + int index; + int mtu; + + unsigned char mac[ETH_ALEN]; + int have_mac; + + struct { + union { + struct tuntap_info tuntap; + } info; + + int (*open)(struct iss_net_private *lp); + void (*close)(struct iss_net_private *lp); + int (*read)(struct iss_net_private *lp, struct sk_buff **skb); + int (*write)(struct iss_net_private *lp, struct sk_buff **skb); + unsigned short (*protocol)(struct sk_buff *skb); + int (*poll)(struct iss_net_private *lp); + } tp; + +}; + +/* ======================= ISS SIMCALL INTERFACE =========================== */ + +/* Note: __simc must _not_ be declared inline! */ + +static int errno; + +static int __simc (int a, int b, int c, int d, int e, int f) +{ + int ret; + __asm__ __volatile__ ("simcall\n" + "mov %0, a2\n" + "mov %1, a3\n" : "=a" (ret), "=a" (errno) + : : "a2", "a3"); + return ret; +} + +static int inline simc_open(char *file, int flags, int mode) +{ + return __simc(SYS_open, (int) file, flags, mode, 0, 0); +} + +static int inline simc_close(int fd) +{ + return __simc(SYS_close, fd, 0, 0, 0, 0); +} + +static int inline simc_ioctl(int fd, int request, void *arg) +{ + return __simc(SYS_ioctl, fd, request, (int) arg, 0, 0); +} + +static int inline simc_read(int fd, void *buf, size_t count) +{ + return __simc(SYS_read, fd, (int) buf, count, 0, 0); +} + +static int inline simc_write(int fd, void *buf, size_t count) +{ + return __simc(SYS_write, fd, (int) buf, count, 0, 0); +} + +static int inline simc_poll(int fd) +{ + struct timeval tv = { .tv_sec = 0, .tv_usec = 0 }; + + return __simc(SYS_select_one, fd, XTISS_SELECT_ONE_READ, (int)&tv,0,0); +} + +/* ================================ HELPERS ================================ */ + + +static char *split_if_spec(char *str, ...) +{ + char **arg, *end; + va_list ap; + + va_start(ap, str); + while ((arg = va_arg(ap, char**)) != NULL) { + if (*str == '\0') + return NULL; + end = strchr(str, ','); + if (end != str) + *arg = str; + if (end == NULL) + return NULL; + *end ++ = '\0'; + str = end; + } + va_end(ap); + return str; +} + + +#if 0 +/* Adjust SKB. */ + +struct sk_buff *ether_adjust_skb(struct sk_buff *skb, int extra) +{ + if ((skb != NULL) && (skb_tailroom(skb) < extra)) { + struct sk_buff *skb2; + + skb2 = skb_copy_expand(skb, 0, extra, GFP_ATOMIC); + dev_kfree_skb(skb); + skb = skb2; + } + if (skb != NULL) + skb_put(skb, extra); + + return skb; +} +#endif + +/* Return the IP address as a string for a given device. */ + +static void dev_ip_addr(void *d, char *buf, char *bin_buf) +{ + struct net_device *dev = d; + struct in_device *ip = dev->ip_ptr; + struct in_ifaddr *in; + u32 addr; + + if ((ip == NULL) || ((in = ip->ifa_list) == NULL)) { + printk(KERN_WARNING "Device not assigned an IP address!\n"); + return; + } + + addr = in->ifa_address; + sprintf(buf, "%d.%d.%d.%d", addr & 0xff, (addr >> 8) & 0xff, + (addr >> 16) & 0xff, addr >> 24); + + if (bin_buf) { + bin_buf[0] = addr & 0xff; + bin_buf[1] = (addr >> 8) & 0xff; + bin_buf[2] = (addr >> 16) & 0xff; + bin_buf[3] = addr >> 24; + } +} + +/* Set Ethernet address of the specified device. */ + +static void inline set_ether_mac(void *d, unsigned char *addr) +{ + struct net_device *dev = d; + memcpy(dev->dev_addr, addr, ETH_ALEN); +} + + +/* ======================= TUNTAP TRANSPORT INTERFACE ====================== */ + +static int tuntap_open(struct iss_net_private *lp) +{ + struct ifreq ifr; + char *dev_name = lp->tp.info.tuntap.dev_name; + int err = -EINVAL; + int fd; + + /* We currently only support a fixed configuration. */ + + if (!lp->tp.info.tuntap.fixed_config) + return -EINVAL; + + if ((fd = simc_open("/dev/net/tun", 02, 0)) < 0) { /* O_RDWR */ + printk("Failed to open /dev/net/tun, returned %d " + "(errno = %d)\n", fd, errno); + return fd; + } + + memset(&ifr, 0, sizeof ifr); + ifr.ifr_flags = IFF_TAP | IFF_NO_PI; + strlcpy(ifr.ifr_name, dev_name, sizeof ifr.ifr_name - 1); + + if ((err = simc_ioctl(fd, TUNSETIFF, (void*) &ifr)) < 0) { + printk("Failed to set interface, returned %d " + "(errno = %d)\n", err, errno); + simc_close(fd); + return err; + } + + lp->tp.info.tuntap.fd = fd; + return err; +} + +static void tuntap_close(struct iss_net_private *lp) +{ +#if 0 + if (lp->tp.info.tuntap.fixed_config) + iter_addresses(lp->tp.info.tuntap.dev, close_addr, lp->host.dev_name); +#endif + simc_close(lp->tp.info.tuntap.fd); + lp->tp.info.tuntap.fd = -1; +} + +static int tuntap_read (struct iss_net_private *lp, struct sk_buff **skb) +{ +#if 0 + *skb = ether_adjust_skb(*skb, ETH_HEADER_OTHER); + if (*skb == NULL) + return -ENOMEM; +#endif + + return simc_read(lp->tp.info.tuntap.fd, + (*skb)->data, (*skb)->dev->mtu + ETH_HEADER_OTHER); +} + +static int tuntap_write (struct iss_net_private *lp, struct sk_buff **skb) +{ + return simc_write(lp->tp.info.tuntap.fd, (*skb)->data, (*skb)->len); +} + +unsigned short tuntap_protocol(struct sk_buff *skb) +{ + return eth_type_trans(skb, skb->dev); +} + +static int tuntap_poll(struct iss_net_private *lp) +{ + return simc_poll(lp->tp.info.tuntap.fd); +} + +/* + * Currently only a device name is supported. + * ethX=tuntap[,[mac address][,[device name]]] + */ + +static int tuntap_probe(struct iss_net_private *lp, int index, char *init) +{ + const int len = strlen(TRANSPORT_TUNTAP_NAME); + char *dev_name = NULL, *mac_str = NULL, *rem = NULL; + + /* Transport should be 'tuntap': ethX=tuntap,mac,dev_name */ + + if (strncmp(init, TRANSPORT_TUNTAP_NAME, len)) + return 0; + + if (*(init += strlen(TRANSPORT_TUNTAP_NAME)) == ',') { + if ((rem=split_if_spec(init+1, &mac_str, &dev_name)) != NULL) { + printk("Extra garbage on specification : '%s'\n", rem); + return 0; + } + } else if (*init != '\0') { + printk("Invalid argument: %s. Skipping device!\n", init); + return 0; + } + + if (dev_name) { + strncpy(lp->tp.info.tuntap.dev_name, dev_name, + sizeof lp->tp.info.tuntap.dev_name); + lp->tp.info.tuntap.fixed_config = 1; + } else + strcpy(lp->tp.info.tuntap.dev_name, TRANSPORT_TUNTAP_NAME); + + +#if 0 + if (setup_etheraddr(mac_str, lp->mac)) + lp->have_mac = 1; +#endif + lp->mtu = TRANSPORT_TUNTAP_MTU; + + //lp->info.tuntap.gate_addr = gate_addr; + + lp->tp.info.tuntap.fd = -1; + + lp->tp.open = tuntap_open; + lp->tp.close = tuntap_close; + lp->tp.read = tuntap_read; + lp->tp.write = tuntap_write; + lp->tp.protocol = tuntap_protocol; + lp->tp.poll = tuntap_poll; + + printk("TUN/TAP backend - "); +#if 0 + if (lp->host.gate_addr != NULL) + printk("IP = %s", lp->host.gate_addr); +#endif + printk("\n"); + + return 1; +} + +/* ================================ ISS NET ================================ */ + +static int iss_net_rx(struct net_device *dev) +{ + struct iss_net_private *lp = dev->priv; + int pkt_len; + struct sk_buff *skb; + + /* Check if there is any new data. */ + + if (lp->tp.poll(lp) == 0) + return 0; + + /* Try to allocate memory, if it fails, try again next round. */ + + if ((skb = dev_alloc_skb(dev->mtu + 2 + ETH_HEADER_OTHER)) == NULL) { + lp->stats.rx_dropped++; + return 0; + } + + skb_reserve(skb, 2); + + /* Setup skb */ + + skb->dev = dev; + skb->mac.raw = skb->data; + pkt_len = lp->tp.read(lp, &skb); + skb_put(skb, pkt_len); + + if (pkt_len > 0) { + skb_trim(skb, pkt_len); + skb->protocol = lp->tp.protocol(skb); + // netif_rx(skb); + netif_rx_ni(skb); + + lp->stats.rx_bytes += skb->len; + lp->stats.rx_packets++; + return pkt_len; + } + kfree_skb(skb); + return pkt_len; +} + +static int iss_net_poll(void) +{ + struct list_head *ele; + int err, ret = 0; + + spin_lock(&opened_lock); + + list_for_each(ele, &opened) { + struct iss_net_private *lp; + + lp = list_entry(ele, struct iss_net_private, opened_list); + + if (!netif_running(lp->dev)) + break; + + spin_lock(&lp->lock); + + while ((err = iss_net_rx(lp->dev)) > 0) + ret++; + + spin_unlock(&lp->lock); + + if (err < 0) { + printk(KERN_ERR "Device '%s' read returned %d, " + "shutting it down\n", lp->dev->name, err); + dev_close(lp->dev); + } else { + // FIXME reactivate_fd(lp->fd, ISS_ETH_IRQ); + } + } + + spin_unlock(&opened_lock); + return ret; +} + + +static void iss_net_timer(unsigned long priv) +{ + struct iss_net_private* lp = (struct iss_net_private*) priv; + + spin_lock(&lp->lock); + + iss_net_poll(); + + mod_timer(&lp->timer, jiffies + lp->timer_val); + + spin_unlock(&lp->lock); +} + + +static int iss_net_open(struct net_device *dev) +{ + struct iss_net_private *lp = dev->priv; + char addr[sizeof "255.255.255.255\0"]; + int err; + + spin_lock(&lp->lock); + + if ((err = lp->tp.open(lp)) < 0) + goto out; + + if (!lp->have_mac) { + dev_ip_addr(dev, addr, &lp->mac[2]); + set_ether_mac(dev, lp->mac); + } + + netif_start_queue(dev); + + /* clear buffer - it can happen that the host side of the interface + * is full when we gethere. In this case, new data is never queued, + * SIGIOs never arrive, and the net never works. + */ + while ((err = iss_net_rx(dev)) > 0) + ; + + spin_lock(&opened_lock); + list_add(&lp->opened_list, &opened); + spin_unlock(&opened_lock); + + init_timer(&lp->timer); + lp->timer_val = ISS_NET_TIMER_VALUE; + lp->timer.data = (unsigned long) lp; + lp->timer.function = iss_net_timer; + mod_timer(&lp->timer, jiffies + lp->timer_val); + +out: + spin_unlock(&lp->lock); + return err; +} + +static int iss_net_close(struct net_device *dev) +{ + struct iss_net_private *lp = dev->priv; +printk("iss_net_close!\n"); + netif_stop_queue(dev); + spin_lock(&lp->lock); + + spin_lock(&opened_lock); + list_del(&opened); + spin_unlock(&opened_lock); + + del_timer_sync(&lp->timer); + + lp->tp.close(lp); + + spin_unlock(&lp->lock); + return 0; +} + +static int iss_net_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct iss_net_private *lp = dev->priv; + unsigned long flags; + int len; + + netif_stop_queue(dev); + spin_lock_irqsave(&lp->lock, flags); + + len = lp->tp.write(lp, &skb); + + if (len == skb->len) { + lp->stats.tx_packets++; + lp->stats.tx_bytes += skb->len; + dev->trans_start = jiffies; + netif_start_queue(dev); + + /* this is normally done in the interrupt when tx finishes */ + netif_wake_queue(dev); + + } else if (len == 0) { + netif_start_queue(dev); + lp->stats.tx_dropped++; + + } else { + netif_start_queue(dev); + printk(KERN_ERR "iss_net_start_xmit: failed(%d)\n", len); + } + + spin_unlock_irqrestore(&lp->lock, flags); + + dev_kfree_skb(skb); + return 0; +} + + +static struct net_device_stats *iss_net_get_stats(struct net_device *dev) +{ + struct iss_net_private *lp = dev->priv; + return &lp->stats; +} + +static void iss_net_set_multicast_list(struct net_device *dev) +{ +#if 0 + if (dev->flags & IFF_PROMISC) + return; + else if (dev->mc_count) + dev->flags |= IFF_ALLMULTI; + else + dev->flags &= ~IFF_ALLMULTI; +#endif +} + +static void iss_net_tx_timeout(struct net_device *dev) +{ +#if 0 + dev->trans_start = jiffies; + netif_wake_queue(dev); +#endif +} + +static int iss_net_set_mac(struct net_device *dev, void *addr) +{ +#if 0 + struct iss_net_private *lp = dev->priv; + struct sockaddr *hwaddr = addr; + + spin_lock(&lp->lock); + memcpy(dev->dev_addr, hwaddr->sa_data, ETH_ALEN); + spin_unlock(&lp->lock); +#endif + + return 0; +} + +static int iss_net_change_mtu(struct net_device *dev, int new_mtu) +{ +#if 0 + struct iss_net_private *lp = dev->priv; + int err = 0; + + spin_lock(&lp->lock); + + // FIXME not needed new_mtu = transport_set_mtu(new_mtu, &lp->user); + + if (new_mtu < 0) + err = new_mtu; + else + dev->mtu = new_mtu; + + spin_unlock(&lp->lock); + return err; +#endif + return -EINVAL; +} + +static int iss_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ +#if 0 + static const struct ethtool_drvinfo info = { + .cmd = ETHTOOL_GDRVINFO, + .driver = DRIVER_NAME, + .version = "42", + }; + void *useraddr; + u32 ethcmd; + + switch (cmd) { + case SIOCETHTOOL: + useraddr = ifr->ifr_data; + if (copy_from_user(ðcmd, useraddr, sizeof(ethcmd))) + return -EFAULT; + + switch (ethcmd) { + case ETHTOOL_GDRVINFO: + if (copy_to_user(useraddr, &info, sizeof(info))) + return -EFAULT; + return 0; + default: + return -EOPNOTSUPP; + } + default: + return -EINVAL; + } +#endif + return -EINVAL; +} + +void iss_net_user_timer_expire(unsigned long _conn) +{ +} + + +static struct device_driver iss_net_driver = { + .name = DRIVER_NAME, + .bus = &platform_bus_type, +}; + +static int driver_registered; + +static int iss_net_configure(int index, char *init) +{ + struct net_device *dev; + struct iss_net_private *lp; + int err; + + if ((dev = alloc_etherdev(sizeof *lp)) == NULL) { + printk(KERN_ERR "eth_configure: failed to allocate device\n"); + return 1; + } + + /* Initialize private element. */ + + lp = dev->priv; + *lp = ((struct iss_net_private) { + .device_list = LIST_HEAD_INIT(lp->device_list), + .opened_list = LIST_HEAD_INIT(lp->opened_list), + .lock = SPIN_LOCK_UNLOCKED, + .dev = dev, + .index = index, + //.fd = -1, + .mac = { 0xfe, 0xfd, 0x0, 0x0, 0x0, 0x0 }, + .have_mac = 0, + }); + + /* + * Try all transport protocols. + * Note: more protocols can be added by adding '&& !X_init(lp, eth)'. + */ + + if (!tuntap_probe(lp, index, init)) { + printk("Invalid arguments. Skipping device!\n"); + goto errout; + } + + printk(KERN_INFO "Netdevice %d ", index); + if (lp->have_mac) + printk("(%02x:%02x:%02x:%02x:%02x:%02x) ", + lp->mac[0], lp->mac[1], + lp->mac[2], lp->mac[3], + lp->mac[4], lp->mac[5]); + printk(": "); + + /* sysfs register */ + + if (!driver_registered) { + driver_register(&iss_net_driver); + driver_registered = 1; + } + + spin_lock(&devices_lock); + list_add(&lp->device_list, &devices); + spin_unlock(&devices_lock); + + lp->pdev.id = index; + lp->pdev.name = DRIVER_NAME; + platform_device_register(&lp->pdev); + SET_NETDEV_DEV(dev,&lp->pdev.dev); + + /* + * If this name ends up conflicting with an existing registered + * netdevice, that is OK, register_netdev{,ice}() will notice this + * and fail. + */ + snprintf(dev->name, sizeof dev->name, "eth%d", index); + + dev->mtu = lp->mtu; + dev->open = iss_net_open; + dev->hard_start_xmit = iss_net_start_xmit; + dev->stop = iss_net_close; + dev->get_stats = iss_net_get_stats; + dev->set_multicast_list = iss_net_set_multicast_list; + dev->tx_timeout = iss_net_tx_timeout; + dev->set_mac_address = iss_net_set_mac; + dev->change_mtu = iss_net_change_mtu; + dev->do_ioctl = iss_net_ioctl; + dev->watchdog_timeo = (HZ >> 1); + dev->irq = -1; + + rtnl_lock(); + err = register_netdevice(dev); + rtnl_unlock(); + + if (err) { + printk("Error registering net device!\n"); + /* XXX: should we call ->remove() here? */ + free_netdev(dev); + return 1; + } + + init_timer(&lp->tl); + lp->tl.function = iss_net_user_timer_expire; + +#if 0 + if (lp->have_mac) + set_ether_mac(dev, lp->mac); +#endif + return 0; + +errout: + // FIXME: unregister; free, etc.. + return -EIO; + +} + +/* ------------------------------------------------------------------------- */ + +/* Filled in during early boot */ + +struct list_head eth_cmd_line = LIST_HEAD_INIT(eth_cmd_line); + +struct iss_net_init { + struct list_head list; + char *init; /* init string */ + int index; +}; + +/* + * Parse the command line and look for 'ethX=...' fields, and register all + * those fields. They will be later initialized in iss_net_init. + */ + +#define ERR KERN_ERR "iss_net_setup: " + +static int iss_net_setup(char *str) +{ + struct iss_net_private *device = NULL; + struct iss_net_init *new; + struct list_head *ele; + char *end; + int n; + + n = simple_strtoul(str, &end, 0); + if (end == str) { + printk(ERR "Failed to parse '%s'\n", str); + return 1; + } + if (n < 0) { + printk(ERR "Device %d is negative\n", n); + return 1; + } + if (*(str = end) != '=') { + printk(ERR "Expected '=' after device number\n"); + return 1; + } + + spin_lock(&devices_lock); + + list_for_each(ele, &devices) { + device = list_entry(ele, struct iss_net_private, device_list); + if (device->index == n) + break; + } + + spin_unlock(&devices_lock); + + if (device && device->index == n) { + printk(ERR "Device %d already configured\n", n); + return 1; + } + + if ((new = alloc_bootmem(sizeof new)) == NULL) { + printk("Alloc_bootmem failed\n"); + return 1; + } + + INIT_LIST_HEAD(&new->list); + new->index = n; + new->init = str + 1; + + list_add_tail(&new->list, ð_cmd_line); + return 1; +} + +#undef ERR + +__setup("eth", iss_net_setup); + +/* + * Initialize all ISS Ethernet devices previously registered in iss_net_setup. + */ + +static int iss_net_init(void) +{ + struct list_head *ele, *next; + + /* Walk through all Ethernet devices specified in the command line. */ + + list_for_each_safe(ele, next, ð_cmd_line) { + struct iss_net_init *eth; + eth = list_entry(ele, struct iss_net_init, list); + iss_net_configure(eth->index, eth->init); + } + + return 1; +} + +module_init(iss_net_init); + diff --git a/arch/xtensa/platform-iss/setup.c b/arch/xtensa/platform-iss/setup.c new file mode 100644 index 000000000000..2e6dcbf0cc04 --- /dev/null +++ b/arch/xtensa/platform-iss/setup.c @@ -0,0 +1,112 @@ +/* + * + * arch/xtensa/platform-iss/setup.c + * + * Platform specific initialization. + * + * Authors: Chris Zankel <chris@zankel.net> + * Joe Taylor <joe@tensilica.com> + * + * Copyright 2001 - 2005 Tensilica Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/types.h> +#include <linux/major.h> +#include <linux/blkdev.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/stringify.h> +#include <linux/notifier.h> + +#include <asm/platform.h> +#include <asm/bootparam.h> + + +void __init platform_init(bp_tag_t* bootparam) +{ + +} + +void platform_halt(void) +{ + printk (" ** Called platform_halt(), looping forever! **\n"); + while (1); +} + +void platform_power_off(void) +{ + printk (" ** Called platform_power_off(), looping forever! **\n"); + while (1); +} +void platform_restart(void) +{ + /* Flush and reset the mmu, simulate a processor reset, and + * jump to the reset vector. */ + + __asm__ __volatile__("movi a2, 15\n\t" + "wsr a2, " __stringify(ICOUNTLEVEL) "\n\t" + "movi a2, 0\n\t" + "wsr a2, " __stringify(ICOUNT) "\n\t" + "wsr a2, " __stringify(IBREAKENABLE) "\n\t" + "wsr a2, " __stringify(LCOUNT) "\n\t" + "movi a2, 0x1f\n\t" + "wsr a2, " __stringify(PS) "\n\t" + "isync\n\t" + "jx %0\n\t" + : + : "a" (XCHAL_RESET_VECTOR_VADDR) + : "a2"); + + /* control never gets here */ +} + +extern void iss_net_poll(void); + +const char twirl[]="|/-\\|/-\\"; + +void platform_heartbeat(void) +{ +#if 0 + static int i = 0, j = 0; + + if (--i < 0) { + i = 99; + printk("\r%c\r", twirl[j++]); + if (j == 8) + j = 0; + } +#endif +} + + + +static int +iss_panic_event(struct notifier_block *this, unsigned long event, void *ptr) +{ + __asm__ __volatile__("movi a2, -1; simcall\n"); + return NOTIFY_DONE; +} + +static struct notifier_block iss_panic_block = { + iss_panic_event, + NULL, + 0 +}; + +void __init platform_setup(char **p_cmdline) +{ + notifier_chain_register(&panic_notifier_list, &iss_panic_block); +} |
