summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/configs/mx3_defconfig46
-rw-r--r--arch/arm/mach-imx/mach-kzm_arm11_01.c1
-rw-r--r--arch/arm/mach-imx/mach-pcm038.c4
-rw-r--r--arch/arm/mach-imx/mach-qong.c5
-rw-r--r--arch/arm/mach-mxs/mach-mx23evk.c2
-rw-r--r--arch/arm/mach-mxs/mach-mx28evk.c2
-rw-r--r--arch/arm/mach-mxs/mach-tx28.c2
-rw-r--r--arch/arm/plat-mxc/include/mach/mx27.h14
-rw-r--r--arch/arm/plat-mxc/include/mach/mx31.h14
9 files changed, 44 insertions, 46 deletions
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 7c4b30b34952..cb0717fbb03d 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_EXPERT=y
CONFIG_SLAB=y
CONFIG_MODULES=y
@@ -13,20 +12,21 @@ CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MXC=y
CONFIG_MACH_MX31ADS_WM1133_EV1=y
+CONFIG_MACH_MX31LILLY=y
+CONFIG_MACH_MX31LITE=y
CONFIG_MACH_PCM037=y
CONFIG_MACH_PCM037_EET=y
-CONFIG_MACH_MX31LITE=y
CONFIG_MACH_MX31_3DS=y
CONFIG_MACH_MX31MOBOARD=y
-CONFIG_MACH_MX31LILLY=y
CONFIG_MACH_QONG=y
-CONFIG_MACH_PCM043=y
CONFIG_MACH_ARMADILLO5X0=y
-CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_EUKREA_CPUIMX35=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
+CONFIG_ARM_ERRATA_411920=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
@@ -35,7 +35,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
CONFIG_VFP=y
-CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_NET=y
CONFIG_PACKET=y
@@ -52,7 +51,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_FW_LOADER=m
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
@@ -62,24 +60,27 @@ CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_UBI=y
# CONFIG_BLK_DEV is not set
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_SMSC911X=y
CONFIG_DNET=y
-CONFIG_FEC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_IMX=y
+# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
@@ -89,12 +90,15 @@ CONFIG_W1=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_WM8350=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_RC_CORE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_MT9M001=y
CONFIG_SOC_CAMERA_MT9M111=y
@@ -105,9 +109,26 @@ CONFIG_SOC_CAMERA_OV772X=y
CONFIG_VIDEO_MX3=y
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_FB=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_MXC_SOC_WM1133_EV1=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_FSL_USB2=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_ULPI=y
CONFIG_MMC=y
CONFIG_MMC_MXC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_MXC=y
CONFIG_DMADEVICES=y
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
@@ -119,6 +140,5 @@ CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 7c20e9e58006..4e030ac58847 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -36,6 +36,7 @@
#include <mach/clock.h>
#include <mach/common.h>
+#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
#include "devices-imx31.h"
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 091bcf87e1a0..a497a2997002 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -176,7 +176,9 @@ static struct platform_device *platform_devices[] __initdata = {
* setup other stuffs to access the sram. */
static void __init pcm038_init_sram(void)
{
- mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
+ __raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1)));
+ __raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1)));
+ __raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1)));
}
static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 9e11359c324c..c33ab00845f6 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -190,7 +190,10 @@ static struct platform_device qong_nand_device = {
static void __init qong_init_nand_mtd(void)
{
/* init CS */
- mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
+ __raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
+ __raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
+ __raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
+
mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
/* enable pin */
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index 99b01e988c8d..69e218de536e 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -181,6 +181,6 @@ MACHINE_START(MX23EVK, "Freescale MX23 EVK")
/* Maintainer: Freescale Semiconductor, Inc. */
.map_io = mx23_map_io,
.init_irq = mx23_init_irq,
- .init_machine = mx23evk_init,
.timer = &mx23evk_timer,
+ .init_machine = mx23evk_init,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 8b3aa7afdae0..0173c3bce4ef 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -419,6 +419,6 @@ MACHINE_START(MX28EVK, "Freescale MX28 EVK")
/* Maintainer: Freescale Semiconductor, Inc. */
.map_io = mx28_map_io,
.init_irq = mx28_init_irq,
- .init_machine = mx28evk_init,
.timer = &mx28evk_timer,
+ .init_machine = mx28evk_init,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
index 515a423f82cd..955593806fd2 100644
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ b/arch/arm/mach-mxs/mach-tx28.c
@@ -175,6 +175,6 @@ static struct sys_timer tx28_timer = {
MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
.map_io = mx28_map_io,
.init_irq = mx28_init_irq,
- .init_machine = tx28_stk5v3_init,
.timer = &tx28_timer,
+ .init_machine = tx28_stk5v3_init,
MACHINE_END
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 1dc1c522601b..6265357284d7 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -24,10 +24,6 @@
#ifndef __MACH_MX27_H__
#define __MACH_MX27_H__
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-
#define MX27_AIPI_BASE_ADDR 0x10000000
#define MX27_AIPI_SIZE SZ_1M
#define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000)
@@ -131,16 +127,6 @@
#define MX27_IO_P2V(x) IMX_IO_P2V(x)
#define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x))
-#ifndef __ASSEMBLER__
-static inline void mx27_setup_weimcs(size_t cs,
- unsigned upper, unsigned lower, unsigned addional)
-{
- __raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs)));
- __raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs)));
- __raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs)));
-}
-#endif
-
/* fixed interrupt numbers */
#define MX27_INT_I2C2 1
#define MX27_INT_GPT6 2
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 79e7fc01bb59..e27619e442c0 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,10 +1,6 @@
#ifndef __MACH_MX31_H__
#define __MACH_MX31_H__
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-
/*
* IRAM
*/
@@ -122,16 +118,6 @@
#define MX31_IO_P2V(x) IMX_IO_P2V(x)
#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x))
-#ifndef __ASSEMBLER__
-static inline void mx31_setup_weimcs(size_t cs,
- unsigned upper, unsigned lower, unsigned addional)
-{
- __raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
- __raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
- __raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
-}
-#endif
-
#define MX31_INT_I2C3 3
#define MX31_INT_I2C2 4
#define MX31_INT_MPEG4_ENCODER 5
OpenPOWER on IntegriCloud