diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/boot/dts/exynos5250.dtsi | 12 | ||||
| -rw-r--r-- | arch/arm/include/asm/hardware/pl080.h | 146 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/dma.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-spear3xx/spear3xx.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-spear6xx/spear6xx.c | 2 |
5 files changed, 14 insertions, 150 deletions
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index f50b4e854355..b1ac73e21c80 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -312,24 +312,36 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x121A0000 0x1000>; interrupts = <0 34 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; pdma1: pdma@121B0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121B0000 0x1000>; interrupts = <0 35 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; mdma0: mdma@10800000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10800000 0x1000>; interrupts = <0 33 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; }; mdma1: mdma@11C10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x11C10000 0x1000>; interrupts = <0 124 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; }; }; diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h deleted file mode 100644 index 4eea2107214b..000000000000 --- a/arch/arm/include/asm/hardware/pl080.h +++ /dev/null @@ -1,146 +0,0 @@ -/* arch/arm/include/asm/hardware/pl080.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * ARM PrimeCell PL080 DMA controller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Note, there are some Samsung updates to this controller block which - * make it not entierly compatible with the PL080 specification from - * ARM. When in doubt, check the Samsung documentation first. - * - * The Samsung defines are PL080S, and add an extra control register, - * the ability to move more than 2^11 counts of data and some extra - * OneNAND features. -*/ - -#ifndef ASM_PL080_H -#define ASM_PL080_H - -#define PL080_INT_STATUS (0x00) -#define PL080_TC_STATUS (0x04) -#define PL080_TC_CLEAR (0x08) -#define PL080_ERR_STATUS (0x0C) -#define PL080_ERR_CLEAR (0x10) -#define PL080_RAW_TC_STATUS (0x14) -#define PL080_RAW_ERR_STATUS (0x18) -#define PL080_EN_CHAN (0x1c) -#define PL080_SOFT_BREQ (0x20) -#define PL080_SOFT_SREQ (0x24) -#define PL080_SOFT_LBREQ (0x28) -#define PL080_SOFT_LSREQ (0x2C) - -#define PL080_CONFIG (0x30) -#define PL080_CONFIG_M2_BE (1 << 2) -#define PL080_CONFIG_M1_BE (1 << 1) -#define PL080_CONFIG_ENABLE (1 << 0) - -#define PL080_SYNC (0x34) - -/* Per channel configuration registers */ - -#define PL080_Cx_STRIDE (0x20) -#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20))) -#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20))) -#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20))) -#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20))) -#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20))) -#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20))) -#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20))) -#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20))) - -#define PL080_CH_SRC_ADDR (0x00) -#define PL080_CH_DST_ADDR (0x04) -#define PL080_CH_LLI (0x08) -#define PL080_CH_CONTROL (0x0C) -#define PL080_CH_CONFIG (0x10) -#define PL080S_CH_CONTROL2 (0x10) -#define PL080S_CH_CONFIG (0x14) - -#define PL080_LLI_ADDR_MASK (0x3fffffff << 2) -#define PL080_LLI_ADDR_SHIFT (2) -#define PL080_LLI_LM_AHB2 (1 << 0) - -#define PL080_CONTROL_TC_IRQ_EN (1 << 31) -#define PL080_CONTROL_PROT_MASK (0x7 << 28) -#define PL080_CONTROL_PROT_SHIFT (28) -#define PL080_CONTROL_PROT_CACHE (1 << 30) -#define PL080_CONTROL_PROT_BUFF (1 << 29) -#define PL080_CONTROL_PROT_SYS (1 << 28) -#define PL080_CONTROL_DST_INCR (1 << 27) -#define PL080_CONTROL_SRC_INCR (1 << 26) -#define PL080_CONTROL_DST_AHB2 (1 << 25) -#define PL080_CONTROL_SRC_AHB2 (1 << 24) -#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21) -#define PL080_CONTROL_DWIDTH_SHIFT (21) -#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18) -#define PL080_CONTROL_SWIDTH_SHIFT (18) -#define PL080_CONTROL_DB_SIZE_MASK (0x7 << 15) -#define PL080_CONTROL_DB_SIZE_SHIFT (15) -#define PL080_CONTROL_SB_SIZE_MASK (0x7 << 12) -#define PL080_CONTROL_SB_SIZE_SHIFT (12) -#define PL080_CONTROL_TRANSFER_SIZE_MASK (0xfff << 0) -#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0) - -#define PL080_BSIZE_1 (0x0) -#define PL080_BSIZE_4 (0x1) -#define PL080_BSIZE_8 (0x2) -#define PL080_BSIZE_16 (0x3) -#define PL080_BSIZE_32 (0x4) -#define PL080_BSIZE_64 (0x5) -#define PL080_BSIZE_128 (0x6) -#define PL080_BSIZE_256 (0x7) - -#define PL080_WIDTH_8BIT (0x0) -#define PL080_WIDTH_16BIT (0x1) -#define PL080_WIDTH_32BIT (0x2) - -#define PL080N_CONFIG_ITPROT (1 << 20) -#define PL080N_CONFIG_SECPROT (1 << 19) -#define PL080_CONFIG_HALT (1 << 18) -#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */ -#define PL080_CONFIG_LOCK (1 << 16) -#define PL080_CONFIG_TC_IRQ_MASK (1 << 15) -#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14) -#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11) -#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11) -#define PL080_CONFIG_DST_SEL_MASK (0xf << 6) -#define PL080_CONFIG_DST_SEL_SHIFT (6) -#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1) -#define PL080_CONFIG_SRC_SEL_SHIFT (1) -#define PL080_CONFIG_ENABLE (1 << 0) - -#define PL080_FLOW_MEM2MEM (0x0) -#define PL080_FLOW_MEM2PER (0x1) -#define PL080_FLOW_PER2MEM (0x2) -#define PL080_FLOW_SRC2DST (0x3) -#define PL080_FLOW_SRC2DST_DST (0x4) -#define PL080_FLOW_MEM2PER_PER (0x5) -#define PL080_FLOW_PER2MEM_PER (0x6) -#define PL080_FLOW_SRC2DST_SRC (0x7) - -/* DMA linked list chain structure */ - -struct pl080_lli { - u32 src_addr; - u32 dst_addr; - u32 next_lli; - u32 control0; -}; - -struct pl080s_lli { - u32 src_addr; - u32 dst_addr; - u32 next_lli; - u32 control0; - u32 control1; -}; - -#endif /* ASM_PL080_H */ diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index ec29b35f25c0..6af1aa1ef213 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -23,13 +23,12 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/amba/pl080.h> #include <mach/dma.h> #include <mach/map.h> #include <mach/irqs.h> -#include <asm/hardware/pl080.h> - #include "regs-sys.h" /* dma channel state information */ diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index b2ba516ca2d4..f9d754f90c59 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -16,7 +16,6 @@ #include <linux/amba/pl022.h> #include <linux/amba/pl08x.h> #include <linux/io.h> -#include <asm/hardware/pl080.h> #include <plat/pl080.h> #include <mach/generic.h> #include <mach/spear.h> diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index b8bd33ca88bd..8904d8a52d84 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -20,7 +20,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_platform.h> -#include <asm/hardware/pl080.h> +#include <linux/amba/pl080.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> |
