diff options
Diffstat (limited to 'arch/x86')
40 files changed, 1514 insertions, 202 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index a67e014e4e44..153aa6f78299 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1737,8 +1737,8 @@ menuconfig APM machines with more than one CPU. In order to use APM, you will need supporting software. For location - and more information, read <file:Documentation/power/pm.txt> and the - Battery Powered Linux mini-HOWTO, available from + and more information, read <file:Documentation/power/apm-acpi.txt> + and the Battery Powered Linux mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>. This driver does not spin down disk drives (see the hdparm(8) @@ -2024,11 +2024,44 @@ config OLPC Add support for detecting the unique features of the OLPC XO hardware. -config OLPC_XO1 - tristate "OLPC XO-1 support" - depends on OLPC && MFD_CS5535 - ---help--- - Add support for non-essential features of the OLPC XO-1 laptop. +config OLPC_XO1_PM + bool "OLPC XO-1 Power Management" + depends on OLPC && MFD_CS5535 && PM_SLEEP + select MFD_CORE + ---help--- + Add support for poweroff and suspend of the OLPC XO-1 laptop. + +config OLPC_XO1_RTC + bool "OLPC XO-1 Real Time Clock" + depends on OLPC_XO1_PM && RTC_DRV_CMOS + ---help--- + Add support for the XO-1 real time clock, which can be used as a + programmable wakeup source. + +config OLPC_XO1_SCI + bool "OLPC XO-1 SCI extras" + depends on OLPC && OLPC_XO1_PM + select POWER_SUPPLY + select GPIO_CS5535 + select MFD_CORE + ---help--- + Add support for SCI-based features of the OLPC XO-1 laptop: + - EC-driven system wakeups + - Power button + - Ebook switch + - Lid switch + - AC adapter status updates + - Battery status updates + +config OLPC_XO15_SCI + bool "OLPC XO-1.5 SCI extras" + depends on OLPC && ACPI + select POWER_SUPPLY + ---help--- + Add support for SCI-based features of the OLPC XO-1.5 laptop: + - EC-driven system wakeups + - AC adapter status updates + - Battery status updates endif # X86_32 diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c index 5852519b2d0f..f6f5c53dc903 100644 --- a/arch/x86/ia32/sys_ia32.c +++ b/arch/x86/ia32/sys_ia32.c @@ -43,7 +43,7 @@ #include <asm/mman.h> #include <asm/types.h> #include <asm/uaccess.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/vgtod.h> #include <asm/sys_ia32.h> diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 4a0b7c7e2cce..7b3ca8324b69 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -8,7 +8,7 @@ #include <asm/cpufeature.h> #include <asm/processor.h> #include <asm/apicdef.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/fixmap.h> #include <asm/mpspec.h> #include <asm/system.h> diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h index 952a826ac4e5..10572e309ab2 100644 --- a/arch/x86/include/asm/atomic.h +++ b/arch/x86/include/asm/atomic.h @@ -221,15 +221,15 @@ static inline int atomic_xchg(atomic_t *v, int new) } /** - * atomic_add_unless - add unless the number is already a given value + * __atomic_add_unless - add unless the number is already a given value * @v: pointer of type atomic_t * @a: the amount to add to v... * @u: ...unless v is equal to u. * * Atomically adds @a to @v, so long as @v was not already @u. - * Returns non-zero if @v was not @u, and zero otherwise. + * Returns the old value of @v. */ -static inline int atomic_add_unless(atomic_t *v, int a, int u) +static inline int __atomic_add_unless(atomic_t *v, int a, int u) { int c, old; c = atomic_read(v); @@ -241,10 +241,9 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) break; c = old; } - return c != (u); + return c; } -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) /* * atomic_dec_if_positive - decrement by 1 if old value positive @@ -319,5 +318,4 @@ static inline void atomic_or_long(unsigned long *v1, unsigned long v2) # include "atomic64_64.h" #endif -#include <asm-generic/atomic-long.h> #endif /* _ASM_X86_ATOMIC_H */ diff --git a/arch/x86/include/asm/atomic64_32.h b/arch/x86/include/asm/atomic64_32.h index 2a934aa19a43..24098aafce0d 100644 --- a/arch/x86/include/asm/atomic64_32.h +++ b/arch/x86/include/asm/atomic64_32.h @@ -263,7 +263,7 @@ static inline int atomic64_add_negative(long long i, atomic64_t *v) * @u: ...unless v is equal to u. * * Atomically adds @a to @v, so long as it was not @u. - * Returns non-zero if @v was not @u, and zero otherwise. + * Returns the old value of @v. */ static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u) { diff --git a/arch/x86/include/asm/atomic64_64.h b/arch/x86/include/asm/atomic64_64.h index 49fd1ea22951..017594d403f6 100644 --- a/arch/x86/include/asm/atomic64_64.h +++ b/arch/x86/include/asm/atomic64_64.h @@ -202,7 +202,7 @@ static inline long atomic64_xchg(atomic64_t *v, long new) * @u: ...unless v is equal to u. * * Atomically adds @a to @v, so long as it was not @u. - * Returns non-zero if @v was not @u, and zero otherwise. + * Returns the old value of @v. */ static inline int atomic64_add_unless(atomic64_t *v, long a, long u) { diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h index 69d58131bc8e..1775d6e5920e 100644 --- a/arch/x86/include/asm/bitops.h +++ b/arch/x86/include/asm/bitops.h @@ -458,10 +458,7 @@ static inline int fls(int x) #include <asm-generic/bitops/le.h> -#define ext2_set_bit_atomic(lock, nr, addr) \ - test_and_set_bit((nr), (unsigned long *)(addr)) -#define ext2_clear_bit_atomic(lock, nr, addr) \ - test_and_clear_bit((nr), (unsigned long *)(addr)) +#include <asm-generic/bitops/ext2-atomic-setbit.h> #endif /* __KERNEL__ */ #endif /* _ASM_X86_BITOPS_H */ diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h index 13f5504c76c0..09199052060f 100644 --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -21,7 +21,7 @@ #include <linux/profile.h> #include <linux/smp.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/irq.h> #include <asm/sections.h> diff --git a/arch/x86/include/asm/kdebug.h b/arch/x86/include/asm/kdebug.h index fe2cc6e105fa..d73f1571bde7 100644 --- a/arch/x86/include/asm/kdebug.h +++ b/arch/x86/include/asm/kdebug.h @@ -28,7 +28,6 @@ extern void show_registers(struct pt_regs *regs); extern void show_trace(struct task_struct *t, struct pt_regs *regs, unsigned long *sp, unsigned long bp); extern void __show_regs(struct pt_regs *regs, int all); -extern void show_regs(struct pt_regs *regs); extern unsigned long oops_begin(void); extern void oops_end(unsigned long, struct pt_regs *, int signr); #ifdef CONFIG_KEXEC diff --git a/arch/x86/include/asm/local.h b/arch/x86/include/asm/local.h index 2e9972468a5d..9cdae5d47e8f 100644 --- a/arch/x86/include/asm/local.h +++ b/arch/x86/include/asm/local.h @@ -4,7 +4,7 @@ #include <linux/percpu.h> #include <asm/system.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/asm.h> typedef struct { diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 716b48af7863..c9321f34e55b 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -124,7 +124,7 @@ extern struct atomic_notifier_head x86_mce_decoder_chain; #include <linux/percpu.h> #include <linux/init.h> -#include <asm/atomic.h> +#include <linux/atomic.h> extern int mce_disabled; extern int mce_p5_enabled; diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h index 8b5393ec1080..69021528b43c 100644 --- a/arch/x86/include/asm/mmu_context.h +++ b/arch/x86/include/asm/mmu_context.h @@ -2,7 +2,7 @@ #define _ASM_X86_MMU_CONTEXT_H #include <asm/desc.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/pgalloc.h> #include <asm/tlbflush.h> #include <asm/paravirt.h> diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h index 5ca6801b75f3..87bdbca72f94 100644 --- a/arch/x86/include/asm/olpc.h +++ b/arch/x86/include/asm/olpc.h @@ -13,6 +13,7 @@ struct olpc_platform_t { #define OLPC_F_PRESENT 0x01 #define OLPC_F_DCON 0x02 +#define OLPC_F_EC_WIDE_SCI 0x04 #ifdef CONFIG_OLPC @@ -62,6 +63,13 @@ static inline int olpc_board_at_least(uint32_t rev) return olpc_platform_info.boardrev >= rev; } +extern void olpc_ec_wakeup_set(u16 value); +extern void olpc_ec_wakeup_clear(u16 value); +extern bool olpc_ec_wakeup_available(void); + +extern int olpc_ec_mask_write(u16 bits); +extern int olpc_ec_sci_query(u16 *sci_value); + #else static inline int machine_is_olpc(void) @@ -74,6 +82,20 @@ static inline int olpc_has_dcon(void) return 0; } +static inline void olpc_ec_wakeup_set(u16 value) { } +static inline void olpc_ec_wakeup_clear(u16 value) { } + +static inline bool olpc_ec_wakeup_available(void) +{ + return false; +} + +#endif + +#ifdef CONFIG_OLPC_XO1_PM +extern void do_olpc_suspend_lowlevel(void); +extern void olpc_xo1_pm_wakeup_set(u16 value); +extern void olpc_xo1_pm_wakeup_clear(u16 value); #endif extern int pci_olpc_init(void); @@ -83,14 +105,19 @@ extern int pci_olpc_init(void); extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen, unsigned char *outbuf, size_t outlen); -extern int olpc_ec_mask_set(uint8_t bits); -extern int olpc_ec_mask_unset(uint8_t bits); - /* EC commands */ -#define EC_FIRMWARE_REV 0x08 -#define EC_WLAN_ENTER_RESET 0x35 -#define EC_WLAN_LEAVE_RESET 0x25 +#define EC_FIRMWARE_REV 0x08 +#define EC_WRITE_SCI_MASK 0x1b +#define EC_WAKE_UP_WLAN 0x24 +#define EC_WLAN_LEAVE_RESET 0x25 +#define EC_READ_EB_MODE 0x2a +#define EC_SET_SCI_INHIBIT 0x32 +#define EC_SET_SCI_INHIBIT_RELEASE 0x34 +#define EC_WLAN_ENTER_RESET 0x35 +#define EC_WRITE_EXT_SCI_MASK 0x38 +#define EC_SCI_QUERY 0x84 +#define EC_EXT_SCI_QUERY 0x85 /* SCI source values */ @@ -99,10 +126,12 @@ extern int olpc_ec_mask_unset(uint8_t bits); #define EC_SCI_SRC_BATTERY 0x02 #define EC_SCI_SRC_BATSOC 0x04 #define EC_SCI_SRC_BATERR 0x08 -#define EC_SCI_SRC_EBOOK 0x10 -#define EC_SCI_SRC_WLAN 0x20 +#define EC_SCI_SRC_EBOOK 0x10 /* XO-1 only */ +#define EC_SCI_SRC_WLAN 0x20 /* XO-1 only */ #define EC_SCI_SRC_ACPWR 0x40 -#define EC_SCI_SRC_ALL 0x7F +#define EC_SCI_SRC_BATCRIT 0x80 +#define EC_SCI_SRC_GPWAKE 0x100 /* XO-1.5 only */ +#define EC_SCI_SRC_ALL 0x1FF /* GPIO assignments */ @@ -116,7 +145,7 @@ extern int olpc_ec_mask_unset(uint8_t bits); #define OLPC_GPIO_SMB_CLK 14 #define OLPC_GPIO_SMB_DATA 15 #define OLPC_GPIO_WORKAUX geode_gpio(24) -#define OLPC_GPIO_LID geode_gpio(26) -#define OLPC_GPIO_ECSCI geode_gpio(27) +#define OLPC_GPIO_LID 26 +#define OLPC_GPIO_ECSCI 27 #endif /* _ASM_X86_OLPC_H */ diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index df1287019e6d..644dd885f05a 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -19,7 +19,7 @@ #include <linux/pci.h> #include <asm/irq.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/setup.h> #include <asm/irq_controller.h> diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index e9e51f710e6c..ee67edf86fdd 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -1,7 +1,7 @@ #ifndef _ASM_X86_SPINLOCK_H #define _ASM_X86_SPINLOCK_H -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/page.h> #include <asm/processor.h> #include <linux/compiler.h> diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index 1f2e61e28981..a1fe5c127b52 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h @@ -21,7 +21,7 @@ struct task_struct; struct exec_domain; #include <asm/processor.h> #include <asm/ftrace.h> -#include <asm/atomic.h> +#include <linux/atomic.h> struct thread_info { struct task_struct *task; /* main task structure */ diff --git a/arch/x86/kernel/amd_gart_64.c b/arch/x86/kernel/amd_gart_64.c index b117efd24f71..8a439d364b94 100644 --- a/arch/x86/kernel/amd_gart_64.c +++ b/arch/x86/kernel/amd_gart_64.c @@ -30,7 +30,7 @@ #include <linux/syscore_ops.h> #include <linux/io.h> #include <linux/gfp.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/mtrr.h> #include <asm/pgtable.h> #include <asm/proto.h> diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index b24be38c8cf8..52fa56399a50 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -38,7 +38,7 @@ #include <asm/perf_event.h> #include <asm/x86_init.h> #include <asm/pgalloc.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/mpspec.h> #include <asm/i8259.h> #include <asm/proto.h> diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 9536b3fe43f8..5d513bc47b6b 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -48,7 +48,7 @@ #include <linux/io.h> #include <asm/apicdef.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/fixmap.h> #include <asm/mpspec.h> #include <asm/setup.h> diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 22a073d7fbff..62184390a601 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -21,7 +21,7 @@ #include <linux/topology.h> #include <linux/cpumask.h> #include <asm/pgtable.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/proto.h> #include <asm/setup.h> #include <asm/apic.h> diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index 12aff2537682..739d8598f789 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -321,7 +321,7 @@ static inline unsigned short twd_i387_to_fxsr(unsigned short twd) return tmp; } -#define FPREG_ADDR(f, n) ((void *)&(f)->st_space + (n) * 16); +#define FPREG_ADDR(f, n) ((void *)&(f)->st_space + (n) * 16) #define FP_EXP_TAG_VALID 0 #define FP_EXP_TAG_ZERO 1 #define FP_EXP_TAG_SPECIAL 2 diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 65b8f5c2eebf..610485223bdb 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -14,7 +14,7 @@ #include <linux/io.h> #include <linux/delay.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/system.h> #include <asm/timer.h> #include <asm/hw_irq.h> diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index f09d4bbe2d2d..b3300e6bacef 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -15,7 +15,7 @@ #include <linux/io.h> #include <linux/delay.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/system.h> #include <asm/timer.h> #include <asm/hw_irq.h> diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c index e8c33a302006..726494b58345 100644 --- a/arch/x86/kernel/pci-calgary_64.c +++ b/arch/x86/kernel/pci-calgary_64.c @@ -1553,7 +1553,7 @@ static void __init calgary_fixup_one_tce_space(struct pci_dev *dev) continue; /* cover the whole region */ - npages = (r->end - r->start) >> PAGE_SHIFT; + npages = resource_size(r) >> PAGE_SHIFT; npages++; iommu_range_reserve(tbl, r->start, npages); diff --git a/arch/x86/kernel/probe_roms.c b/arch/x86/kernel/probe_roms.c index ba0a4cce53be..63228035f9d7 100644 --- a/arch/x86/kernel/probe_roms.c +++ b/arch/x86/kernel/probe_roms.c @@ -234,7 +234,7 @@ void __init probe_roms(void) /* check for extension rom (ignore length byte!) */ rom = isa_bus_to_virt(extension_rom_resource.start); if (romsignature(rom)) { - length = extension_rom_resource.end - extension_rom_resource.start + 1; + length = resource_size(&extension_rom_resource); if (romchecksum(rom, length)) { request_resource(&iomem_resource, &extension_rom_resource); upper = extension_rom_resource.start; diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index fbc097a085ca..9682ec50180c 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -49,7 +49,7 @@ #include <asm/stacktrace.h> #include <asm/processor.h> #include <asm/debugreg.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/system.h> #include <asm/traps.h> #include <asm/desc.h> diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 2b2255b1f04b..57dcbd4308fa 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -33,7 +33,7 @@ #include <asm/page.h> #include <asm/current.h> #include <asm/apicdef.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include "kvm_cache_regs.h" #include "irq.h" #include "trace.h" diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 9335e1bf72ad..1c5b69373a00 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -22,7 +22,6 @@ #include "mmu.h" #include "x86.h" #include "kvm_cache_regs.h" -#include "x86.h" #include <linux/kvm_host.h> #include <linux/types.h> diff --git a/arch/x86/kvm/timer.c b/arch/x86/kvm/timer.c index abd86e865be3..ae432ea1cd83 100644 --- a/arch/x86/kvm/timer.c +++ b/arch/x86/kvm/timer.c @@ -15,7 +15,7 @@ #include <linux/kvm_host.h> #include <linux/kvm.h> #include <linux/hrtimer.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include "kvm_timer.h" static int __kvm_timer_fn(struct kvm_vcpu *vcpu, struct kvm_timer *ktimer) diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c index 540179e8e9fa..042f6826bf57 100644 --- a/arch/x86/lib/atomic64_32.c +++ b/arch/x86/lib/atomic64_32.c @@ -4,7 +4,7 @@ #include <asm/processor.h> #include <asm/cmpxchg.h> -#include <asm/atomic.h> +#include <linux/atomic.h> long long atomic64_read_cx8(long long, const atomic64_t *v); EXPORT_SYMBOL(atomic64_read_cx8); diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index 3adff7dcc148..67421f38a215 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -34,7 +34,7 @@ #include <asm/pgtable.h> #include <linux/mmiotrace.h> #include <asm/e820.h> /* for ISA_START_ADDRESS */ -#include <asm/atomic.h> +#include <linux/atomic.h> #include <linux/percpu.h> #include <linux/cpu.h> diff --git a/arch/x86/platform/olpc/Makefile b/arch/x86/platform/olpc/Makefile index 81c5e2165c24..fd332c533947 100644 --- a/arch/x86/platform/olpc/Makefile +++ b/arch/x86/platform/olpc/Makefile @@ -1,2 +1,5 @@ obj-$(CONFIG_OLPC) += olpc.o olpc_ofw.o olpc_dt.o -obj-$(CONFIG_OLPC_XO1) += olpc-xo1.o +obj-$(CONFIG_OLPC_XO1_PM) += olpc-xo1-pm.o xo1-wakeup.o +obj-$(CONFIG_OLPC_XO1_RTC) += olpc-xo1-rtc.o +obj-$(CONFIG_OLPC_XO1_SCI) += olpc-xo1-sci.o +obj-$(CONFIG_OLPC_XO15_SCI) += olpc-xo15-sci.o diff --git a/arch/x86/platform/olpc/olpc-xo1-pm.c b/arch/x86/platform/olpc/olpc-xo1-pm.c new file mode 100644 index 000000000000..6f3855a5a2f7 --- /dev/null +++ b/arch/x86/platform/olpc/olpc-xo1-pm.c @@ -0,0 +1,215 @@ +/* + * Support for power management features of the OLPC XO-1 laptop + * + * Copyright (C) 2010 Andres Salomon <dilinger@queued.net> + * Copyright (C) 2010 One Laptop per Child + * Copyright (C) 2006 Red Hat, Inc. + * Copyright (C) 2006 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/cs5535.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/mfd/core.h> +#include <linux/suspend.h> + +#include <asm/io.h> +#include <asm/olpc.h> + +#define DRV_NAME "olpc-xo1-pm" + +static unsigned long acpi_base; +static unsigned long pms_base; + +static u16 wakeup_mask = CS5536_PM_PWRBTN; + +static struct { + unsigned long address; + unsigned short segment; +} ofw_bios_entry = { 0xF0000 + PAGE_OFFSET, __KERNEL_CS }; + +/* Set bits in the wakeup mask */ +void olpc_xo1_pm_wakeup_set(u16 value) +{ + wakeup_mask |= value; +} +EXPORT_SYMBOL_GPL(olpc_xo1_pm_wakeup_set); + +/* Clear bits in the wakeup mask */ +void olpc_xo1_pm_wakeup_clear(u16 value) +{ + wakeup_mask &= ~value; +} +EXPORT_SYMBOL_GPL(olpc_xo1_pm_wakeup_clear); + +static int xo1_power_state_enter(suspend_state_t pm_state) +{ + unsigned long saved_sci_mask; + int r; + + /* Only STR is supported */ + if (pm_state != PM_SUSPEND_MEM) + return -EINVAL; + + r = olpc_ec_cmd(EC_SET_SCI_INHIBIT, NULL, 0, NULL, 0); + if (r) + return r; + + /* + * Save SCI mask (this gets lost since PM1_EN is used as a mask for + * wakeup events, which is not necessarily the same event set) + */ + saved_sci_mask = inl(acpi_base + CS5536_PM1_STS); + saved_sci_mask &= 0xffff0000; + + /* Save CPU state */ + do_olpc_suspend_lowlevel(); + + /* Resume path starts here */ + + /* Restore SCI mask (using dword access to CS5536_PM1_EN) */ + outl(saved_sci_mask, acpi_base + CS5536_PM1_STS); + + /* Tell the EC to stop inhibiting SCIs */ + olpc_ec_cmd(EC_SET_SCI_INHIBIT_RELEASE, NULL, 0, NULL, 0); + + /* + * Tell the wireless module to restart USB communication. + * Must be done twice. + */ + olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0); + olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0); + + return 0; +} + +asmlinkage int xo1_do_sleep(u8 sleep_state) +{ + void *pgd_addr = __va(read_cr3()); + + /* Program wakeup mask (using dword access to CS5536_PM1_EN) */ + outl(wakeup_mask << 16, acpi_base + CS5536_PM1_STS); + + __asm__("movl %0,%%eax" : : "r" (pgd_addr)); + __asm__("call *(%%edi); cld" + : : "D" (&ofw_bios_entry)); + __asm__("movb $0x34, %al\n\t" + "outb %al, $0x70\n\t" + "movb $0x30, %al\n\t" + "outb %al, $0x71\n\t"); + return 0; +} + +static void xo1_power_off(void) +{ + printk(KERN_INFO "OLPC XO-1 power off sequence...\n"); + + /* Enable all of these controls with 0 delay */ + outl(0x40000000, pms_base + CS5536_PM_SCLK); + outl(0x40000000, pms_base + CS5536_PM_IN_SLPCTL); + outl(0x40000000, pms_base + CS5536_PM_WKXD); + outl(0x40000000, pms_base + CS5536_PM_WKD); + + /* Clear status bits (possibly unnecessary) */ + outl(0x0002ffff, pms_base + CS5536_PM_SSC); + outl(0xffffffff, acpi_base + CS5536_PM_GPE0_STS); + + /* Write SLP_EN bit to start the machinery */ + outl(0x00002000, acpi_base + CS5536_PM1_CNT); +} + +static int xo1_power_state_valid(suspend_state_t pm_state) +{ + /* suspend-to-RAM only */ + return pm_state == PM_SUSPEND_MEM; +} + +static const struct platform_suspend_ops xo1_suspend_ops = { + .valid = xo1_power_state_valid, + .enter = xo1_power_state_enter, +}; + +static int __devinit xo1_pm_probe(struct platform_device *pdev) +{ + struct resource *res; + int err; + + /* don't run on non-XOs */ + if (!machine_is_olpc()) + return -ENODEV; + + err = mfd_cell_enable(pdev); + if (err) + return err; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!res) { + dev_err(&pdev->dev, "can't fetch device resource info\n"); + return -EIO; + } + if (strcmp(pdev->name, "cs5535-pms") == 0) + pms_base = res->start; + else if (strcmp(pdev->name, "olpc-xo1-pm-acpi") == 0) + acpi_base = res->start; + + /* If we have both addresses, we can override the poweroff hook */ + if (pms_base && acpi_base) { + suspend_set_ops(&xo1_suspend_ops); + pm_power_off = xo1_power_off; + printk(KERN_INFO "OLPC XO-1 support registered\n"); + } + + return 0; +} + +static int __devexit xo1_pm_remove(struct platform_device *pdev) +{ + mfd_cell_disable(pdev); + + if (strcmp(pdev->name, "cs5535-pms") == 0) + pms_base = 0; + else if (strcmp(pdev->name, "olpc-xo1-pm-acpi") == 0) + acpi_base = 0; + + pm_power_off = NULL; + return 0; +} + +static struct platform_driver cs5535_pms_driver = { + .driver = { + .name = "cs5535-pms", + .owner = THIS_MODULE, + }, + .probe = xo1_pm_probe, + .remove = __devexit_p(xo1_pm_remove), +}; + +static struct platform_driver cs5535_acpi_driver = { + .driver = { + .name = "olpc-xo1-pm-acpi", + .owner = THIS_MODULE, + }, + .probe = xo1_pm_probe, + .remove = __devexit_p(xo1_pm_remove), +}; + +static int __init xo1_pm_init(void) +{ + int r; + + r = platform_driver_register(&cs5535_pms_driver); + if (r) + return r; + + r = platform_driver_register(&cs5535_acpi_driver); + if (r) + platform_driver_unregister(&cs5535_pms_driver); + + return r; +} +arch_initcall(xo1_pm_init); diff --git a/arch/x86/platform/olpc/olpc-xo1-rtc.c b/arch/x86/platform/olpc/olpc-xo1-rtc.c new file mode 100644 index 000000000000..a2b4efddd61a --- /dev/null +++ b/arch/x86/platform/olpc/olpc-xo1-rtc.c @@ -0,0 +1,81 @@ +/* + * Support for OLPC XO-1 Real Time Clock (RTC) + * + * Copyright (C) 2011 One Laptop per Child + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/mc146818rtc.h> +#include <linux/platform_device.h> +#include <linux/rtc.h> +#include <linux/of.h> + +#include <asm/msr.h> +#include <asm/olpc.h> + +static void rtc_wake_on(struct device *dev) +{ + olpc_xo1_pm_wakeup_set(CS5536_PM_RTC); +} + +static void rtc_wake_off(struct device *dev) +{ + olpc_xo1_pm_wakeup_clear(CS5536_PM_RTC); +} + +static struct resource rtc_platform_resource[] = { + [0] = { + .start = RTC_PORT(0), + .end = RTC_PORT(1), + .flags = IORESOURCE_IO, + }, + [1] = { + .start = RTC_IRQ, + .end = RTC_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct cmos_rtc_board_info rtc_info = { + .rtc_day_alarm = 0, + .rtc_mon_alarm = 0, + .rtc_century = 0, + .wake_on = rtc_wake_on, + .wake_off = rtc_wake_off, +}; + +static struct platform_device xo1_rtc_device = { + .name = "rtc_cmos", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_platform_resource), + .dev.platform_data = &rtc_info, + .resource = rtc_platform_resource, +}; + +static int __init xo1_rtc_init(void) +{ + int r; + struct device_node *node; + + node = of_find_compatible_node(NULL, NULL, "olpc,xo1-rtc"); + if (!node) + return 0; + of_node_put(node); + + pr_info("olpc-xo1-rtc: Initializing OLPC XO-1 RTC\n"); + rdmsrl(MSR_RTC_DOMA_OFFSET, rtc_info.rtc_day_alarm); + rdmsrl(MSR_RTC_MONA_OFFSET, rtc_info.rtc_mon_alarm); + rdmsrl(MSR_RTC_CEN_OFFSET, rtc_info.rtc_century); + + r = platform_device_register(&xo1_rtc_device); + if (r) + return r; + + device_init_wakeup(&xo1_rtc_device.dev, 1); + return 0; +} +arch_initcall(xo1_rtc_init); diff --git a/arch/x86/platform/olpc/olpc-xo1-sci.c b/arch/x86/platform/olpc/olpc-xo1-sci.c new file mode 100644 index 000000000000..1d4c783d7325 --- /dev/null +++ b/arch/x86/platform/olpc/olpc-xo1-sci.c @@ -0,0 +1,614 @@ +/* + * Support for OLPC XO-1 System Control Interrupts (SCI) + * + * Copyright (C) 2010 One Laptop per Child + * Copyright (C) 2006 Red Hat, Inc. + * Copyright (C) 2006 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/cs5535.h> +#include <linux/device.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/mfd/core.h> +#include <linux/power_supply.h> +#include <linux/suspend.h> +#include <linux/workqueue.h> + +#include <asm/io.h> +#include <asm/msr.h> +#include <asm/olpc.h> + +#define DRV_NAME "olpc-xo1-sci" +#define PFX DRV_NAME ": " + +static unsigned long acpi_base; +static struct input_dev *power_button_idev; +static struct input_dev *ebook_switch_idev; +static struct input_dev *lid_switch_idev; + +static int sci_irq; + +static bool lid_open; +static bool lid_inverted; +static int lid_wake_mode; + +enum lid_wake_modes { + LID_WAKE_ALWAYS, + LID_WAKE_OPEN, + LID_WAKE_CLOSE, +}; + +static const char * const lid_wake_mode_names[] = { + [LID_WAKE_ALWAYS] = "always", + [LID_WAKE_OPEN] = "open", + [LID_WAKE_CLOSE] = "close", +}; + +static void battery_status_changed(void) +{ + struct power_supply *psy = power_supply_get_by_name("olpc-battery"); + + if (psy) { + power_supply_changed(psy); + put_device(psy->dev); + } +} + +static void ac_status_changed(void) +{ + struct power_supply *psy = power_supply_get_by_name("olpc-ac"); + + if (psy) { + power_supply_changed(psy); + put_device(psy->dev); + } +} + +/* Report current ebook switch state through input layer */ +static void send_ebook_state(void) +{ + unsigned char state; + + if (olpc_ec_cmd(EC_READ_EB_MODE, NULL, 0, &state, 1)) { + pr_err(PFX "failed to get ebook state\n"); + return; + } + + input_report_switch(ebook_switch_idev, SW_TABLET_MODE, state); + input_sync(ebook_switch_idev); +} + +static void flip_lid_inverter(void) +{ + /* gpio is high; invert so we'll get l->h event interrupt */ + if (lid_inverted) + cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_INPUT_INVERT); + else + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_INPUT_INVERT); + lid_inverted = !lid_inverted; +} + +static void detect_lid_state(void) +{ + /* + * the edge detector hookup on the gpio inputs on the geode is + * odd, to say the least. See http://dev.laptop.org/ticket/5703 + * for details, but in a nutshell: we don't use the edge + * detectors. instead, we make use of an anomoly: with the both + * edge detectors turned off, we still get an edge event on a + * positive edge transition. to take advantage of this, we use the + * front-end inverter to ensure that that's the edge we're always + * going to see next. + */ + + int state; + + state = cs5535_gpio_isset(OLPC_GPIO_LID, GPIO_READ_BACK); + lid_open = !state ^ !lid_inverted; /* x ^^ y */ + if (!state) + return; + + flip_lid_inverter(); +} + +/* Report current lid switch state through input layer */ +static void send_lid_state(void) +{ + input_report_switch(lid_switch_idev, SW_LID, !lid_open); + input_sync(lid_switch_idev); +} + +static ssize_t lid_wake_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + const char *mode = lid_wake_mode_names[lid_wake_mode]; + return sprintf(buf, "%s\n", mode); +} +static ssize_t lid_wake_mode_set(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int i; + for (i = 0; i < ARRAY_SIZE(lid_wake_mode_names); i++) { + const char *mode = lid_wake_mode_names[i]; + if (strlen(mode) != count || strncasecmp(mode, buf, count)) + continue; + + lid_wake_mode = i; + return count; + } + return -EINVAL; +} +static DEVICE_ATTR(lid_wake_mode, S_IWUSR | S_IRUGO, lid_wake_mode_show, + lid_wake_mode_set); + +/* + * Process all items in the EC's SCI queue. + * + * This is handled in a workqueue because olpc_ec_cmd can be slow (and + * can even timeout). + * + * If propagate_events is false, the queue is drained without events being + * generated for the interrupts. + */ +static void process_sci_queue(bool propagate_events) +{ + int r; + u16 data; + + do { + r = olpc_ec_sci_query(&data); + if (r || !data) + break; + + pr_debug(PFX "SCI 0x%x received\n", data); + + switch (data) { + case EC_SCI_SRC_BATERR: + case EC_SCI_SRC_BATSOC: + case EC_SCI_SRC_BATTERY: + case EC_SCI_SRC_BATCRIT: + battery_status_changed(); + break; + case EC_SCI_SRC_ACPWR: + ac_status_changed(); + break; + } + + if (data == EC_SCI_SRC_EBOOK && propagate_events) + send_ebook_state(); + } while (data); + + if (r) + pr_err(PFX "Failed to clear SCI queue"); +} + +static void process_sci_queue_work(struct work_struct *work) +{ + process_sci_queue(true); +} + +static DECLARE_WORK(sci_work, process_sci_queue_work); + +static irqreturn_t xo1_sci_intr(int irq, void *dev_id) +{ + struct platform_device *pdev = dev_id; + u32 sts; + u32 gpe; + + sts = inl(acpi_base + CS5536_PM1_STS); + outl(sts | 0xffff, acpi_base + CS5536_PM1_STS); + + gpe = inl(acpi_base + CS5536_PM_GPE0_STS); + outl(0xffffffff, acpi_base + CS5536_PM_GPE0_STS); + + dev_dbg(&pdev->dev, "sts %x gpe %x\n", sts, gpe); + + if (sts & CS5536_PWRBTN_FLAG && !(sts & CS5536_WAK_FLAG)) { + input_report_key(power_button_idev, KEY_POWER, 1); + input_sync(power_button_idev); + input_report_key(power_button_idev, KEY_POWER, 0); + input_sync(power_button_idev); + } + + if (gpe & CS5536_GPIOM7_PME_FLAG) { /* EC GPIO */ + cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS); + schedule_work(&sci_work); + } + + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); + detect_lid_state(); + send_lid_state(); + + return IRQ_HANDLED; +} + +static int xo1_sci_suspend(struct platform_device *pdev, pm_message_t state) +{ + if (device_may_wakeup(&power_button_idev->dev)) + olpc_xo1_pm_wakeup_set(CS5536_PM_PWRBTN); + else + olpc_xo1_pm_wakeup_clear(CS5536_PM_PWRBTN); + + if (device_may_wakeup(&ebook_switch_idev->dev)) + olpc_ec_wakeup_set(EC_SCI_SRC_EBOOK); + else + olpc_ec_wakeup_clear(EC_SCI_SRC_EBOOK); + + if (!device_may_wakeup(&lid_switch_idev->dev)) { + cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + } else if ((lid_open && lid_wake_mode == LID_WAKE_OPEN) || + (!lid_open && lid_wake_mode == LID_WAKE_CLOSE)) { + flip_lid_inverter(); + + /* we may have just caused an event */ + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); + + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + } + + return 0; +} + +static int xo1_sci_resume(struct platform_device *pdev) +{ + /* + * We don't know what may have happened while we were asleep. + * Reestablish our lid setup so we're sure to catch all transitions. + */ + detect_lid_state(); + send_lid_state(); + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + + /* Enable all EC events */ + olpc_ec_mask_write(EC_SCI_SRC_ALL); + + /* Power/battery status might have changed too */ + battery_status_changed(); + ac_status_changed(); + return 0; +} + +static int __devinit setup_sci_interrupt(struct platform_device *pdev) +{ + u32 lo, hi; + u32 sts; + int r; + + rdmsr(0x51400020, lo, hi); + sci_irq = (lo >> 20) & 15; + + if (sci_irq) { + dev_info(&pdev->dev, "SCI is mapped to IRQ %d\n", sci_irq); + } else { + /* Zero means masked */ + dev_info(&pdev->dev, "SCI unmapped. Mapping to IRQ 3\n"); + sci_irq = 3; + lo |= 0x00300000; + wrmsrl(0x51400020, lo); + } + + /* Select level triggered in PIC */ + if (sci_irq < 8) { + lo = inb(CS5536_PIC_INT_SEL1); + lo |= 1 << sci_irq; + outb(lo, CS5536_PIC_INT_SEL1); + } else { + lo = inb(CS5536_PIC_INT_SEL2); + lo |= 1 << (sci_irq - 8); + outb(lo, CS5536_PIC_INT_SEL2); + } + + /* Enable SCI from power button, and clear pending interrupts */ + sts = inl(acpi_base + CS5536_PM1_STS); + outl((CS5536_PM_PWRBTN << 16) | 0xffff, acpi_base + CS5536_PM1_STS); + + r = request_irq(sci_irq, xo1_sci_intr, 0, DRV_NAME, pdev); + if (r) + dev_err(&pdev->dev, "can't request interrupt\n"); + + return r; +} + +static int __devinit setup_ec_sci(void) +{ + int r; + + r = gpio_request(OLPC_GPIO_ECSCI, "OLPC-ECSCI"); + if (r) + return r; + + gpio_direction_input(OLPC_GPIO_ECSCI); + + /* Clear pending EC SCI events */ + cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS); + cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_POSITIVE_EDGE_STS); + + /* + * Enable EC SCI events, and map them to both a PME and the SCI + * interrupt. + * + * Ordinarily, in addition to functioning as GPIOs, Geode GPIOs can + * be mapped to regular interrupts *or* Geode-specific Power + * Management Events (PMEs) - events that bring the system out of + * suspend. In this case, we want both of those things - the system + * wakeup, *and* the ability to get an interrupt when an event occurs. + * + * To achieve this, we map the GPIO to a PME, and then we use one + * of the many generic knobs on the CS5535 PIC to additionally map the + * PME to the regular SCI interrupt line. + */ + cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_EVENTS_ENABLE); + + /* Set the SCI to cause a PME event on group 7 */ + cs5535_gpio_setup_event(OLPC_GPIO_ECSCI, 7, 1); + + /* And have group 7 also fire the SCI interrupt */ + cs5535_pic_unreqz_select_high(7, sci_irq); + + return 0; +} + +static void free_ec_sci(void) +{ + gpio_free(OLPC_GPIO_ECSCI); +} + +static int __devinit setup_lid_events(void) +{ + int r; + + r = gpio_request(OLPC_GPIO_LID, "OLPC-LID"); + if (r) + return r; + + gpio_direction_input(OLPC_GPIO_LID); + + cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_INPUT_INVERT); + lid_inverted = 0; + + /* Clear edge detection and event enable for now */ + cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); + cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); + + /* Set the LID to cause an PME event on group 6 */ + cs5535_gpio_setup_event(OLPC_GPIO_LID, 6, 1); + + /* Set PME group 6 to fire the SCI interrupt */ + cs5535_gpio_set_irq(6, sci_irq); + + /* Enable the event */ + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + + return 0; +} + +static void free_lid_events(void) +{ + gpio_free(OLPC_GPIO_LID); +} + +static int __devinit setup_power_button(struct platform_device *pdev) +{ + int r; + + power_button_idev = input_allocate_device(); + if (!power_button_idev) + return -ENOMEM; + + power_button_idev->name = "Power Button"; + power_button_idev->phys = DRV_NAME "/input0"; + set_bit(EV_KEY, power_button_idev->evbit); + set_bit(KEY_POWER, power_button_idev->keybit); + + power_button_idev->dev.parent = &pdev->dev; + device_init_wakeup(&power_button_idev->dev, 1); + + r = input_register_device(power_button_idev); + if (r) { + dev_err(&pdev->dev, "failed to register power button: %d\n", r); + input_free_device(power_button_idev); + } + + return r; +} + +static void free_power_button(void) +{ + input_unregister_device(power_button_idev); + input_free_device(power_button_idev); +} + +static int __devinit setup_ebook_switch(struct platform_device *pdev) +{ + int r; + + ebook_switch_idev = input_allocate_device(); + if (!ebook_switch_idev) + return -ENOMEM; + + ebook_switch_idev->name = "EBook Switch"; + ebook_switch_idev->phys = DRV_NAME "/input1"; + set_bit(EV_SW, ebook_switch_idev->evbit); + set_bit(SW_TABLET_MODE, ebook_switch_idev->swbit); + + ebook_switch_idev->dev.parent = &pdev->dev; + device_set_wakeup_capable(&ebook_switch_idev->dev, true); + + r = input_register_device(ebook_switch_idev); + if (r) { + dev_err(&pdev->dev, "failed to register ebook switch: %d\n", r); + input_free_device(ebook_switch_idev); + } + + return r; +} + +static void free_ebook_switch(void) +{ + input_unregister_device(ebook_switch_idev); + input_free_device(ebook_switch_idev); +} + +static int __devinit setup_lid_switch(struct platform_device *pdev) +{ + int r; + + lid_switch_idev = input_allocate_device(); + if (!lid_switch_idev) + return -ENOMEM; + + lid_switch_idev->name = "Lid Switch"; + lid_switch_idev->phys = DRV_NAME "/input2"; + set_bit(EV_SW, lid_switch_idev->evbit); + set_bit(SW_LID, lid_switch_idev->swbit); + + lid_switch_idev->dev.parent = &pdev->dev; + device_set_wakeup_capable(&lid_switch_idev->dev, true); + + r = input_register_device(lid_switch_idev); + if (r) { + dev_err(&pdev->dev, "failed to register lid switch: %d\n", r); + goto err_register; + } + + r = device_create_file(&lid_switch_idev->dev, &dev_attr_lid_wake_mode); + if (r) { + dev_err(&pdev->dev, "failed to create wake mode attr: %d\n", r); + goto err_create_attr; + } + + return 0; + +err_create_attr: + input_unregister_device(lid_switch_idev); +err_register: + input_free_device(lid_switch_idev); + return r; +} + +static void free_lid_switch(void) +{ + device_remove_file(&lid_switch_idev->dev, &dev_attr_lid_wake_mode); + input_unregister_device(lid_switch_idev); + input_free_device(lid_switch_idev); +} + +static int __devinit xo1_sci_probe(struct platform_device *pdev) +{ + struct resource *res; + int r; + + /* don't run on non-XOs */ + if (!machine_is_olpc()) + return -ENODEV; + + r = mfd_cell_enable(pdev); + if (r) + return r; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!res) { + dev_err(&pdev->dev, "can't fetch device resource info\n"); + return -EIO; + } + acpi_base = res->start; + + r = setup_power_button(pdev); + if (r) + return r; + + r = setup_ebook_switch(pdev); + if (r) + goto err_ebook; + + r = setup_lid_switch(pdev); + if (r) + goto err_lid; + + r = setup_lid_events(); + if (r) + goto err_lidevt; + + r = setup_ec_sci(); + if (r) + goto err_ecsci; + + /* Enable PME generation for EC-generated events */ + outl(CS5536_GPIOM6_PME_EN | CS5536_GPIOM7_PME_EN, + acpi_base + CS5536_PM_GPE0_EN); + + /* Clear pending events */ + outl(0xffffffff, acpi_base + CS5536_PM_GPE0_STS); + process_sci_queue(false); + + /* Initial sync */ + send_ebook_state(); + detect_lid_state(); + send_lid_state(); + + r = setup_sci_interrupt(pdev); + if (r) + goto err_sci; + + /* Enable all EC events */ + olpc_ec_mask_write(EC_SCI_SRC_ALL); + + return r; + +err_sci: + free_ec_sci(); +err_ecsci: + free_lid_events(); +err_lidevt: + free_lid_switch(); +err_lid: + free_ebook_switch(); +err_ebook: + free_power_button(); + return r; +} + +static int __devexit xo1_sci_remove(struct platform_device *pdev) +{ + mfd_cell_disable(pdev); + free_irq(sci_irq, pdev); + cancel_work_sync(&sci_work); + free_ec_sci(); + free_lid_events(); + free_lid_switch(); + free_ebook_switch(); + free_power_button(); + acpi_base = 0; + return 0; +} + +static struct platform_driver xo1_sci_driver = { + .driver = { + .name = "olpc-xo1-sci-acpi", + }, + .probe = xo1_sci_probe, + .remove = __devexit_p(xo1_sci_remove), + .suspend = xo1_sci_suspend, + .resume = xo1_sci_resume, +}; + +static int __init xo1_sci_init(void) +{ + return platform_driver_register(&xo1_sci_driver); +} +arch_initcall(xo1_sci_init); diff --git a/arch/x86/platform/olpc/olpc-xo1.c b/arch/x86/platform/olpc/olpc-xo1.c deleted file mode 100644 index ab81fb271760..000000000000 --- a/arch/x86/platform/olpc/olpc-xo1.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * Support for features of the OLPC XO-1 laptop - * - * Copyright (C) 2010 Andres Salomon <dilinger@queued.net> - * Copyright (C) 2010 One Laptop per Child - * Copyright (C) 2006 Red Hat, Inc. - * Copyright (C) 2006 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/pm.h> -#include <linux/mfd/core.h> - -#include <asm/io.h> -#include <asm/olpc.h> - -#define DRV_NAME "olpc-xo1" - -/* PMC registers (PMS block) */ -#define PM_SCLK 0x10 -#define PM_IN_SLPCTL 0x20 -#define PM_WKXD 0x34 -#define PM_WKD 0x30 -#define PM_SSC 0x54 - -/* PM registers (ACPI block) */ -#define PM1_CNT 0x08 -#define PM_GPE0_STS 0x18 - -static unsigned long acpi_base; -static unsigned long pms_base; - -static void xo1_power_off(void) -{ - printk(KERN_INFO "OLPC XO-1 power off sequence...\n"); - - /* Enable all of these controls with 0 delay */ - outl(0x40000000, pms_base + PM_SCLK); - outl(0x40000000, pms_base + PM_IN_SLPCTL); - outl(0x40000000, pms_base + PM_WKXD); - outl(0x40000000, pms_base + PM_WKD); - - /* Clear status bits (possibly unnecessary) */ - outl(0x0002ffff, pms_base + PM_SSC); - outl(0xffffffff, acpi_base + PM_GPE0_STS); - - /* Write SLP_EN bit to start the machinery */ - outl(0x00002000, acpi_base + PM1_CNT); -} - -static int __devinit olpc_xo1_probe(struct platform_device *pdev) -{ - struct resource *res; - int err; - - /* don't run on non-XOs */ - if (!machine_is_olpc()) - return -ENODEV; - - err = mfd_cell_enable(pdev); - if (err) - return err; - - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!res) { - dev_err(&pdev->dev, "can't fetch device resource info\n"); - return -EIO; - } - if (strcmp(pdev->name, "cs5535-pms") == 0) - pms_base = res->start; - else if (strcmp(pdev->name, "olpc-xo1-pm-acpi") == 0) - acpi_base = res->start; - - /* If we have both addresses, we can override the poweroff hook */ - if (pms_base && acpi_base) { - pm_power_off = xo1_power_off; - printk(KERN_INFO "OLPC XO-1 support registered\n"); - } - - return 0; -} - -static int __devexit olpc_xo1_remove(struct platform_device *pdev) -{ - mfd_cell_disable(pdev); - - if (strcmp(pdev->name, "cs5535-pms") == 0) - pms_base = 0; - else if (strcmp(pdev->name, "olpc-xo1-pm-acpi") == 0) - acpi_base = 0; - - pm_power_off = NULL; - return 0; -} - -static struct platform_driver cs5535_pms_drv = { - .driver = { - .name = "cs5535-pms", - .owner = THIS_MODULE, - }, - .probe = olpc_xo1_probe, - .remove = __devexit_p(olpc_xo1_remove), -}; - -static struct platform_driver cs5535_acpi_drv = { - .driver = { - .name = "olpc-xo1-pm-acpi", - .owner = THIS_MODULE, - }, - .probe = olpc_xo1_probe, - .remove = __devexit_p(olpc_xo1_remove), -}; - -static int __init olpc_xo1_init(void) -{ - int r; - - r = platform_driver_register(&cs5535_pms_drv); - if (r) - return r; - - r = platform_driver_register(&cs5535_acpi_drv); - if (r) - platform_driver_unregister(&cs5535_pms_drv); - - return r; -} - -static void __exit olpc_xo1_exit(void) -{ - platform_driver_unregister(&cs5535_acpi_drv); - platform_driver_unregister(&cs5535_pms_drv); -} - -MODULE_AUTHOR("Daniel Drake <dsd@laptop.org>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:cs5535-pms"); - -module_init(olpc_xo1_init); -module_exit(olpc_xo1_exit); diff --git a/arch/x86/platform/olpc/olpc-xo15-sci.c b/arch/x86/platform/olpc/olpc-xo15-sci.c new file mode 100644 index 000000000000..2b235b77d9ab --- /dev/null +++ b/arch/x86/platform/olpc/olpc-xo15-sci.c @@ -0,0 +1,168 @@ +/* + * Support for OLPC XO-1.5 System Control Interrupts (SCI) + * + * Copyright (C) 2009-2010 One Laptop per Child + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/device.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <linux/power_supply.h> + +#include <acpi/acpi_bus.h> +#include <acpi/acpi_drivers.h> +#include <asm/olpc.h> + +#define DRV_NAME "olpc-xo15-sci" +#define PFX DRV_NAME ": " +#define XO15_SCI_CLASS DRV_NAME +#define XO15_SCI_DEVICE_NAME "OLPC XO-1.5 SCI" + +static unsigned long xo15_sci_gpe; + +static void battery_status_changed(void) +{ + struct power_supply *psy = power_supply_get_by_name("olpc-battery"); + + if (psy) { + power_supply_changed(psy); + put_device(psy->dev); + } +} + +static void ac_status_changed(void) +{ + struct power_supply *psy = power_supply_get_by_name("olpc-ac"); + + if (psy) { + power_supply_changed(psy); + put_device(psy->dev); + } +} + +static void process_sci_queue(void) +{ + u16 data; + int r; + + do { + r = olpc_ec_sci_query(&data); + if (r || !data) + break; + + pr_debug(PFX "SCI 0x%x received\n", data); + + switch (data) { + case EC_SCI_SRC_BATERR: + case EC_SCI_SRC_BATSOC: + case EC_SCI_SRC_BATTERY: + case EC_SCI_SRC_BATCRIT: + battery_status_changed(); + break; + case EC_SCI_SRC_ACPWR: + ac_status_changed(); + break; + } + } while (data); + + if (r) + pr_err(PFX "Failed to clear SCI queue"); +} + +static void process_sci_queue_work(struct work_struct *work) +{ + process_sci_queue(); +} + +static DECLARE_WORK(sci_work, process_sci_queue_work); + +static u32 xo15_sci_gpe_handler(acpi_handle gpe_device, u32 gpe, void *context) +{ + schedule_work(&sci_work); + return ACPI_INTERRUPT_HANDLED | ACPI_REENABLE_GPE; +} + +static int xo15_sci_add(struct acpi_device *device) +{ + unsigned long long tmp; + acpi_status status; + + if (!device) + return -EINVAL; + + strcpy(acpi_device_name(device), XO15_SCI_DEVICE_NAME); + strcpy(acpi_device_class(device), XO15_SCI_CLASS); + + /* Get GPE bit assignment (EC events). */ + status = acpi_evaluate_integer(device->handle, "_GPE", NULL, &tmp); + if (ACPI_FAILURE(status)) + return -EINVAL; + + xo15_sci_gpe = tmp; + status = acpi_install_gpe_handler(NULL, xo15_sci_gpe, + ACPI_GPE_EDGE_TRIGGERED, + xo15_sci_gpe_handler, device); + if (ACPI_FAILURE(status)) + return -ENODEV; + + dev_info(&device->dev, "Initialized, GPE = 0x%lx\n", xo15_sci_gpe); + + /* Flush queue, and enable all SCI events */ + process_sci_queue(); + olpc_ec_mask_write(EC_SCI_SRC_ALL); + + acpi_enable_gpe(NULL, xo15_sci_gpe); + + /* Enable wake-on-EC */ + if (device->wakeup.flags.valid) + device_init_wakeup(&device->dev, true); + + return 0; +} + +static int xo15_sci_remove(struct acpi_device *device, int type) +{ + acpi_disable_gpe(NULL, xo15_sci_gpe); + acpi_remove_gpe_handler(NULL, xo15_sci_gpe, xo15_sci_gpe_handler); + cancel_work_sync(&sci_work); + return 0; +} + +static int xo15_sci_resume(struct acpi_device *device) +{ + /* Enable all EC events */ + olpc_ec_mask_write(EC_SCI_SRC_ALL); + + /* Power/battery status might have changed */ + battery_status_changed(); + ac_status_changed(); + + return 0; +} + +static const struct acpi_device_id xo15_sci_device_ids[] = { + {"XO15EC", 0}, + {"", 0}, +}; + +static struct acpi_driver xo15_sci_drv = { + .name = DRV_NAME, + .class = XO15_SCI_CLASS, + .ids = xo15_sci_device_ids, + .ops = { + .add = xo15_sci_add, + .remove = xo15_sci_remove, + .resume = xo15_sci_resume, + }, +}; + +static int __init xo15_sci_init(void) +{ + return acpi_bus_register_driver(&xo15_sci_drv); +} +device_initcall(xo15_sci_init); diff --git a/arch/x86/platform/olpc/olpc.c b/arch/x86/platform/olpc/olpc.c index 0060fd59ea00..8b9940e78e2f 100644 --- a/arch/x86/platform/olpc/olpc.c +++ b/arch/x86/platform/olpc/olpc.c @@ -19,6 +19,7 @@ #include <linux/string.h> #include <linux/platform_device.h> #include <linux/of.h> +#include <linux/syscore_ops.h> #include <asm/geode.h> #include <asm/setup.h> @@ -30,6 +31,9 @@ EXPORT_SYMBOL_GPL(olpc_platform_info); static DEFINE_SPINLOCK(ec_lock); +/* EC event mask to be applied during suspend (defining wakeup sources). */ +static u16 ec_wakeup_mask; + /* what the timeout *should* be (in ms) */ #define EC_BASE_TIMEOUT 20 @@ -188,6 +192,88 @@ err: } EXPORT_SYMBOL_GPL(olpc_ec_cmd); +void olpc_ec_wakeup_set(u16 value) +{ + ec_wakeup_mask |= value; +} +EXPORT_SYMBOL_GPL(olpc_ec_wakeup_set); + +void olpc_ec_wakeup_clear(u16 value) +{ + ec_wakeup_mask &= ~value; +} +EXPORT_SYMBOL_GPL(olpc_ec_wakeup_clear); + +/* + * Returns true if the compile and runtime configurations allow for EC events + * to wake the system. + */ +bool olpc_ec_wakeup_available(void) +{ + if (!machine_is_olpc()) + return false; + + /* + * XO-1 EC wakeups are available when olpc-xo1-sci driver is + * compiled in + */ +#ifdef CONFIG_OLPC_XO1_SCI + if (olpc_platform_info.boardrev < olpc_board_pre(0xd0)) /* XO-1 */ + return true; +#endif + + /* + * XO-1.5 EC wakeups are available when olpc-xo15-sci driver is + * compiled in + */ +#ifdef CONFIG_OLPC_XO15_SCI + if (olpc_platform_info.boardrev >= olpc_board_pre(0xd0)) /* XO-1.5 */ + return true; +#endif + + return false; +} +EXPORT_SYMBOL_GPL(olpc_ec_wakeup_available); + +int olpc_ec_mask_write(u16 bits) +{ + if (olpc_platform_info.flags & OLPC_F_EC_WIDE_SCI) { + __be16 ec_word = cpu_to_be16(bits); + return olpc_ec_cmd(EC_WRITE_EXT_SCI_MASK, (void *) &ec_word, 2, + NULL, 0); + } else { + unsigned char ec_byte = bits & 0xff; + return olpc_ec_cmd(EC_WRITE_SCI_MASK, &ec_byte, 1, NULL, 0); + } +} +EXPORT_SYMBOL_GPL(olpc_ec_mask_write); + +int olpc_ec_sci_query(u16 *sci_value) +{ + int ret; + + if (olpc_platform_info.flags & OLPC_F_EC_WIDE_SCI) { + __be16 ec_word; + ret = olpc_ec_cmd(EC_EXT_SCI_QUERY, + NULL, 0, (void *) &ec_word, 2); + if (ret == 0) + *sci_value = be16_to_cpu(ec_word); + } else { + unsigned char ec_byte; + ret = olpc_ec_cmd(EC_SCI_QUERY, NULL, 0, &ec_byte, 1); + if (ret == 0) + *sci_value = ec_byte; + } + + return ret; +} +EXPORT_SYMBOL_GPL(olpc_ec_sci_query); + +static int olpc_ec_suspend(void) +{ + return olpc_ec_mask_write(ec_wakeup_mask); +} + static bool __init check_ofw_architecture(struct device_node *root) { const char *olpc_arch; @@ -242,6 +328,10 @@ static int __init add_xo1_platform_devices(void) return 0; } +static struct syscore_ops olpc_syscore_ops = { + .suspend = olpc_ec_suspend, +}; + static int __init olpc_init(void) { int r = 0; @@ -266,6 +356,9 @@ static int __init olpc_init(void) !cs5535_has_vsa2()) x86_init.pci.arch_init = pci_olpc_init; #endif + /* EC version 0x5f adds support for wide SCI mask */ + if (olpc_platform_info.ecver >= 0x5f) + olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI; printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n", ((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "", @@ -278,6 +371,8 @@ static int __init olpc_init(void) return r; } + register_syscore_ops(&olpc_syscore_ops); + return 0; } diff --git a/arch/x86/platform/olpc/olpc_dt.c b/arch/x86/platform/olpc/olpc_dt.c index d39f63d017d2..d6ee92986920 100644 --- a/arch/x86/platform/olpc/olpc_dt.c +++ b/arch/x86/platform/olpc/olpc_dt.c @@ -165,6 +165,107 @@ static struct of_pdt_ops prom_olpc_ops __initdata = { .pkg2path = olpc_dt_pkg2path, }; +static phandle __init olpc_dt_finddevice(const char *path) +{ + phandle node; + const void *args[] = { path }; + void *res[] = { &node }; + + if (olpc_ofw("finddevice", args, res)) { + pr_err("olpc_dt: finddevice failed!\n"); + return 0; + } + + if ((s32) node == -1) + return 0; + + return node; +} + +static int __init olpc_dt_interpret(const char *words) +{ + int result; + const void *args[] = { words }; + void *res[] = { &result }; + + if (olpc_ofw("interpret", args, res)) { + pr_err("olpc_dt: interpret failed!\n"); + return -1; + } + + return result; +} + +/* + * Extract board revision directly from OFW device tree. + * We can't use olpc_platform_info because that hasn't been set up yet. + */ +static u32 __init olpc_dt_get_board_revision(void) +{ + phandle node; + __be32 rev; + int r; + + node = olpc_dt_finddevice("/"); + if (!node) + return 0; + + r = olpc_dt_getproperty(node, "board-revision-int", + (char *) &rev, sizeof(rev)); + if (r < 0) + return 0; + + return be32_to_cpu(rev); +} + +void __init olpc_dt_fixup(void) +{ + int r; + char buf[64]; + phandle node; + u32 board_rev; + + node = olpc_dt_finddevice("/battery@0"); + if (!node) + return; + + /* + * If the battery node has a compatible property, we are running a new + * enough firmware and don't have fixups to make. + */ + r = olpc_dt_getproperty(node, "compatible", buf, sizeof(buf)); + if (r > 0) + return; + + pr_info("PROM DT: Old firmware detected, applying fixes\n"); + + /* Add olpc,xo1-battery compatible marker to battery node */ + olpc_dt_interpret("\" /battery@0\" find-device" + " \" olpc,xo1-battery\" +compatible" + " device-end"); + + board_rev = olpc_dt_get_board_revision(); + if (!board_rev) + return; + + if (board_rev >= olpc_board_pre(0xd0)) { + /* XO-1.5: add dcon device */ + olpc_dt_interpret("\" /pci/display@1\" find-device" + " new-device" + " \" dcon\" device-name \" olpc,xo1-dcon\" +compatible" + " finish-device device-end"); + } else { + /* XO-1: add dcon device, mark RTC as olpc,xo1-rtc */ + olpc_dt_interpret("\" /pci/display@1,1\" find-device" + " new-device" + " \" dcon\" device-name \" olpc,xo1-dcon\" +compatible" + " finish-device device-end" + " \" /rtc\" find-device" + " \" olpc,xo1-rtc\" +compatible" + " device-end"); + } +} + void __init olpc_dt_build_devicetree(void) { phandle root; @@ -172,6 +273,8 @@ void __init olpc_dt_build_devicetree(void) if (!olpc_ofw_is_installed()) return; + olpc_dt_fixup(); + root = olpc_dt_getsibling(0); if (!root) { pr_err("PROM: unable to get root node from OFW!\n"); diff --git a/arch/x86/platform/olpc/xo1-wakeup.S b/arch/x86/platform/olpc/xo1-wakeup.S new file mode 100644 index 000000000000..948deb289753 --- /dev/null +++ b/arch/x86/platform/olpc/xo1-wakeup.S @@ -0,0 +1,124 @@ +.text +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/page.h> +#include <asm/pgtable_32.h> + + .macro writepost,value + movb $0x34, %al + outb %al, $0x70 + movb $\value, %al + outb %al, $0x71 + .endm + +wakeup_start: + # OFW lands us here, running in protected mode, with a + # kernel-compatible GDT already setup. + + # Clear any dangerous flags + pushl $0 + popfl + + writepost 0x31 + + # Set up %cr3 + movl $initial_page_table - __PAGE_OFFSET, %eax + movl %eax, %cr3 + + movl saved_cr4, %eax + movl %eax, %cr4 + + movl saved_cr0, %eax + movl %eax, %cr0 + + # Control registers were modified, pipeline resync is needed + jmp 1f +1: + + movw $__KERNEL_DS, %ax + movw %ax, %ss + movw %ax, %ds + movw %ax, %es + movw %ax, %fs + movw %ax, %gs + + lgdt saved_gdt + lidt saved_idt + lldt saved_ldt + ljmp $(__KERNEL_CS),$1f +1: + movl %cr3, %eax + movl %eax, %cr3 + wbinvd + + # Go back to the return point + jmp ret_point + +save_registers: + sgdt saved_gdt + sidt saved_idt + sldt saved_ldt + + pushl %edx + movl %cr4, %edx + movl %edx, saved_cr4 + + movl %cr0, %edx + movl %edx, saved_cr0 + + popl %edx + + movl %ebx, saved_context_ebx + movl %ebp, saved_context_ebp + movl %esi, saved_context_esi + movl %edi, saved_context_edi + + pushfl + popl saved_context_eflags + + ret + +restore_registers: + movl saved_context_ebp, %ebp + movl saved_context_ebx, %ebx + movl saved_context_esi, %esi + movl saved_context_edi, %edi + + pushl saved_context_eflags + popfl + + ret + +ENTRY(do_olpc_suspend_lowlevel) + call save_processor_state + call save_registers + + # This is the stack context we want to remember + movl %esp, saved_context_esp + + pushl $3 + call xo1_do_sleep + + jmp wakeup_start + .p2align 4,,7 +ret_point: + movl saved_context_esp, %esp + + writepost 0x32 + + call restore_registers + call restore_processor_state + ret + +.data +saved_gdt: .long 0,0 +saved_idt: .long 0,0 +saved_ldt: .long 0 +saved_cr4: .long 0 +saved_cr0: .long 0 +saved_context_esp: .long 0 +saved_context_edi: .long 0 +saved_context_esi: .long 0 +saved_context_ebx: .long 0 +saved_context_ebp: .long 0 +saved_context_eflags: .long 0 |
