diff options
Diffstat (limited to 'arch/x86')
| -rw-r--r-- | arch/x86/Kconfig | 10 | ||||
| -rw-r--r-- | arch/x86/include/asm/mca.h | 43 | ||||
| -rw-r--r-- | arch/x86/include/asm/mca_dma.h | 201 | ||||
| -rw-r--r-- | arch/x86/include/asm/mpspec.h | 2 | ||||
| -rw-r--r-- | arch/x86/include/asm/mpspec_def.h | 3 | ||||
| -rw-r--r-- | arch/x86/kernel/Makefile | 1 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/boot.c | 2 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/io_apic.c | 17 | ||||
| -rw-r--r-- | arch/x86/kernel/mca_32.c | 476 | ||||
| -rw-r--r-- | arch/x86/kernel/mpparse.c | 11 | ||||
| -rw-r--r-- | arch/x86/kernel/nmi.c | 12 | ||||
| -rw-r--r-- | arch/x86/kernel/setup.c | 8 | ||||
| -rw-r--r-- | arch/x86/kernel/time.c | 6 | ||||
| -rw-r--r-- | arch/x86/kernel/traps.c | 4 |
14 files changed, 9 insertions, 787 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 4d37072c498a..d6168994e115 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2037,16 +2037,6 @@ config EISA source "drivers/eisa/Kconfig" -config MCA - bool "MCA support" - ---help--- - MicroChannel Architecture is found in some IBM PS/2 machines and - laptops. It is a bus system similar to PCI or ISA. See - <file:Documentation/mca.txt> (and especially the web page given - there) before attempting to build an MCA bus kernel. - -source "drivers/mca/Kconfig" - config SCx200 tristate "NatSemi SCx200 support" ---help--- diff --git a/arch/x86/include/asm/mca.h b/arch/x86/include/asm/mca.h deleted file mode 100644 index eedbb6cc1efb..000000000000 --- a/arch/x86/include/asm/mca.h +++ /dev/null @@ -1,43 +0,0 @@ -/* -*- mode: c; c-basic-offset: 8 -*- */ - -/* Platform specific MCA defines */ -#ifndef _ASM_X86_MCA_H -#define _ASM_X86_MCA_H - -/* Maximal number of MCA slots - actually, some machines have less, but - * they all have sufficient number of POS registers to cover 8. - */ -#define MCA_MAX_SLOT_NR 8 - -/* Most machines have only one MCA bus. The only multiple bus machines - * I know have at most two */ -#define MAX_MCA_BUSSES 2 - -#define MCA_PRIMARY_BUS 0 -#define MCA_SECONDARY_BUS 1 - -/* Dummy slot numbers on primary MCA for integrated functions */ -#define MCA_INTEGSCSI (MCA_MAX_SLOT_NR) -#define MCA_INTEGVIDEO (MCA_MAX_SLOT_NR+1) -#define MCA_MOTHERBOARD (MCA_MAX_SLOT_NR+2) - -/* Dummy POS values for integrated functions */ -#define MCA_DUMMY_POS_START 0x10000 -#define MCA_INTEGSCSI_POS (MCA_DUMMY_POS_START+1) -#define MCA_INTEGVIDEO_POS (MCA_DUMMY_POS_START+2) -#define MCA_MOTHERBOARD_POS (MCA_DUMMY_POS_START+3) - -/* MCA registers */ - -#define MCA_MOTHERBOARD_SETUP_REG 0x94 -#define MCA_ADAPTER_SETUP_REG 0x96 -#define MCA_POS_REG(n) (0x100+(n)) - -#define MCA_ENABLED 0x01 /* POS 2, set if adapter enabled */ - -/* Max number of adapters, including both slots and various integrated - * things. - */ -#define MCA_NUMADAPTERS (MCA_MAX_SLOT_NR+3) - -#endif /* _ASM_X86_MCA_H */ diff --git a/arch/x86/include/asm/mca_dma.h b/arch/x86/include/asm/mca_dma.h deleted file mode 100644 index 45271aef82dd..000000000000 --- a/arch/x86/include/asm/mca_dma.h +++ /dev/null @@ -1,201 +0,0 @@ -#ifndef _ASM_X86_MCA_DMA_H -#define _ASM_X86_MCA_DMA_H - -#include <asm/io.h> -#include <linux/ioport.h> - -/* - * Microchannel specific DMA stuff. DMA on an MCA machine is fairly similar to - * standard PC dma, but it certainly has its quirks. DMA register addresses - * are in a different place and there are some added functions. Most of this - * should be pretty obvious on inspection. Note that the user must divide - * count by 2 when using 16-bit dma; that is not handled by these functions. - * - * Ramen Noodles are yummy. - * - * 1998 Tymm Twillman <tymm@computer.org> - */ - -/* - * Registers that are used by the DMA controller; FN is the function register - * (tell the controller what to do) and EXE is the execution register (how - * to do it) - */ - -#define MCA_DMA_REG_FN 0x18 -#define MCA_DMA_REG_EXE 0x1A - -/* - * Functions that the DMA controller can do - */ - -#define MCA_DMA_FN_SET_IO 0x00 -#define MCA_DMA_FN_SET_ADDR 0x20 -#define MCA_DMA_FN_GET_ADDR 0x30 -#define MCA_DMA_FN_SET_COUNT 0x40 -#define MCA_DMA_FN_GET_COUNT 0x50 -#define MCA_DMA_FN_GET_STATUS 0x60 -#define MCA_DMA_FN_SET_MODE 0x70 -#define MCA_DMA_FN_SET_ARBUS 0x80 -#define MCA_DMA_FN_MASK 0x90 -#define MCA_DMA_FN_RESET_MASK 0xA0 -#define MCA_DMA_FN_MASTER_CLEAR 0xD0 - -/* - * Modes (used by setting MCA_DMA_FN_MODE in the function register) - * - * Note that the MODE_READ is read from memory (write to device), and - * MODE_WRITE is vice-versa. - */ - -#define MCA_DMA_MODE_XFER 0x04 /* read by default */ -#define MCA_DMA_MODE_READ 0x04 /* same as XFER */ -#define MCA_DMA_MODE_WRITE 0x08 /* OR with MODE_XFER to use */ -#define MCA_DMA_MODE_IO 0x01 /* DMA from IO register */ -#define MCA_DMA_MODE_16 0x40 /* 16 bit xfers */ - - -/** - * mca_enable_dma - channel to enable DMA on - * @dmanr: DMA channel - * - * Enable the MCA bus DMA on a channel. This can be called from - * IRQ context. - */ - -static inline void mca_enable_dma(unsigned int dmanr) -{ - outb(MCA_DMA_FN_RESET_MASK | dmanr, MCA_DMA_REG_FN); -} - -/** - * mca_disble_dma - channel to disable DMA on - * @dmanr: DMA channel - * - * Enable the MCA bus DMA on a channel. This can be called from - * IRQ context. - */ - -static inline void mca_disable_dma(unsigned int dmanr) -{ - outb(MCA_DMA_FN_MASK | dmanr, MCA_DMA_REG_FN); -} - -/** - * mca_set_dma_addr - load a 24bit DMA address - * @dmanr: DMA channel - * @a: 24bit bus address - * - * Load the address register in the DMA controller. This has a 24bit - * limitation (16Mb). - */ - -static inline void mca_set_dma_addr(unsigned int dmanr, unsigned int a) -{ - outb(MCA_DMA_FN_SET_ADDR | dmanr, MCA_DMA_REG_FN); - outb(a & 0xff, MCA_DMA_REG_EXE); - outb((a >> 8) & 0xff, MCA_DMA_REG_EXE); - outb((a >> 16) & 0xff, MCA_DMA_REG_EXE); -} - -/** - * mca_get_dma_addr - load a 24bit DMA address - * @dmanr: DMA channel - * - * Read the address register in the DMA controller. This has a 24bit - * limitation (16Mb). The return is a bus address. - */ - -static inline unsigned int mca_get_dma_addr(unsigned int dmanr) -{ - unsigned int addr; - - outb(MCA_DMA_FN_GET_ADDR | dmanr, MCA_DMA_REG_FN); - addr = inb(MCA_DMA_REG_EXE); - addr |= inb(MCA_DMA_REG_EXE) << 8; - addr |= inb(MCA_DMA_REG_EXE) << 16; - - return addr; -} - -/** - * mca_set_dma_count - load a 16bit transfer count - * @dmanr: DMA channel - * @count: count - * - * Set the DMA count for this channel. This can be up to 64Kbytes. - * Setting a count of zero will not do what you expect. - */ - -static inline void mca_set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; /* transfers one more than count -- correct for this */ - - outb(MCA_DMA_FN_SET_COUNT | dmanr, MCA_DMA_REG_FN); - outb(count & 0xff, MCA_DMA_REG_EXE); - outb((count >> 8) & 0xff, MCA_DMA_REG_EXE); -} - -/** - * mca_get_dma_residue - get the remaining bytes to transfer - * @dmanr: DMA channel - * - * This function returns the number of bytes left to transfer - * on this DMA channel. - */ - -static inline unsigned int mca_get_dma_residue(unsigned int dmanr) -{ - unsigned short count; - - outb(MCA_DMA_FN_GET_COUNT | dmanr, MCA_DMA_REG_FN); - count = 1 + inb(MCA_DMA_REG_EXE); - count += inb(MCA_DMA_REG_EXE) << 8; - - return count; -} - -/** - * mca_set_dma_io - set the port for an I/O transfer - * @dmanr: DMA channel - * @io_addr: an I/O port number - * - * Unlike the ISA bus DMA controllers the DMA on MCA bus can transfer - * with an I/O port target. - */ - -static inline void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr) -{ - /* - * DMA from a port address -- set the io address - */ - - outb(MCA_DMA_FN_SET_IO | dmanr, MCA_DMA_REG_FN); - outb(io_addr & 0xff, MCA_DMA_REG_EXE); - outb((io_addr >> 8) & 0xff, MCA_DMA_REG_EXE); -} - -/** - * mca_set_dma_mode - set the DMA mode - * @dmanr: DMA channel - * @mode: mode to set - * - * The DMA controller supports several modes. The mode values you can - * set are- - * - * %MCA_DMA_MODE_READ when reading from the DMA device. - * - * %MCA_DMA_MODE_WRITE to writing to the DMA device. - * - * %MCA_DMA_MODE_IO to do DMA to or from an I/O port. - * - * %MCA_DMA_MODE_16 to do 16bit transfers. - */ - -static inline void mca_set_dma_mode(unsigned int dmanr, unsigned int mode) -{ - outb(MCA_DMA_FN_SET_MODE | dmanr, MCA_DMA_REG_FN); - outb(mode, MCA_DMA_REG_EXE); -} - -#endif /* _ASM_X86_MCA_DMA_H */ diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h index 9c7d95f6174b..3e2f42a4b872 100644 --- a/arch/x86/include/asm/mpspec.h +++ b/arch/x86/include/asm/mpspec.h @@ -40,7 +40,7 @@ extern int quad_local_to_mp_bus_id [NR_CPUS/4][4]; #endif /* CONFIG_X86_64 */ -#if defined(CONFIG_MCA) || defined(CONFIG_EISA) +#ifdef CONFIG_EISA extern int mp_bus_id_to_type[MAX_MP_BUSSES]; #endif diff --git a/arch/x86/include/asm/mpspec_def.h b/arch/x86/include/asm/mpspec_def.h index c0a955a9a087..b31f8c098271 100644 --- a/arch/x86/include/asm/mpspec_def.h +++ b/arch/x86/include/asm/mpspec_def.h @@ -84,7 +84,7 @@ struct mpc_bus { #define BUSTYPE_EISA "EISA" #define BUSTYPE_ISA "ISA" #define BUSTYPE_INTERN "INTERN" /* Internal BUS */ -#define BUSTYPE_MCA "MCA" +#define BUSTYPE_MCA "MCA" /* Obsolete */ #define BUSTYPE_VL "VL" /* Local bus */ #define BUSTYPE_PCI "PCI" #define BUSTYPE_PCMCIA "PCMCIA" @@ -169,6 +169,5 @@ enum mp_bustype { MP_BUS_ISA = 1, MP_BUS_EISA, MP_BUS_PCI, - MP_BUS_MCA, }; #endif /* _ASM_X86_MPSPEC_DEF_H */ diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 56ebd1f98447..bb8529275aab 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -49,7 +49,6 @@ obj-y += cpu/ obj-y += acpi/ obj-y += reboot.o obj-$(CONFIG_X86_32) += reboot_32.o -obj-$(CONFIG_MCA) += mca_32.o obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_X86_CPUID) += cpuid.o obj-$(CONFIG_PCI) += early-quirks.o diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 7c439fe4941b..8afb69319815 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -990,7 +990,7 @@ void __init mp_config_acpi_legacy_irqs(void) int i; struct mpc_intsrc mp_irq; -#if defined (CONFIG_MCA) || defined (CONFIG_EISA) +#ifdef CONFIG_EISA /* * Fabricate the legacy ISA bus (bus #31). */ diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index ffdc152e507d..ac96561d1a99 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -140,7 +140,7 @@ int mp_irq_entries; /* GSI interrupts */ static int nr_irqs_gsi = NR_IRQS_LEGACY; -#if defined (CONFIG_MCA) || defined (CONFIG_EISA) +#ifdef CONFIG_EISA int mp_bus_id_to_type[MAX_MP_BUSSES]; #endif @@ -835,7 +835,7 @@ static int __init find_isa_irq_apic(int irq, int type) return -1; } -#if defined(CONFIG_EISA) || defined(CONFIG_MCA) +#ifdef CONFIG_EISA /* * EISA Edge/Level control register, ELCR */ @@ -872,12 +872,6 @@ static int EISA_ELCR(unsigned int irq) #define default_PCI_trigger(idx) (1) #define default_PCI_polarity(idx) (1) -/* MCA interrupts are always polarity zero level triggered, - * when listed as conforming in the MP table. */ - -#define default_MCA_trigger(idx) (1) -#define default_MCA_polarity(idx) default_ISA_polarity(idx) - static int irq_polarity(int idx) { int bus = mp_irqs[idx].srcbus; @@ -935,7 +929,7 @@ static int irq_trigger(int idx) trigger = default_ISA_trigger(idx); else trigger = default_PCI_trigger(idx); -#if defined(CONFIG_EISA) || defined(CONFIG_MCA) +#ifdef CONFIG_EISA switch (mp_bus_id_to_type[bus]) { case MP_BUS_ISA: /* ISA pin */ { @@ -952,11 +946,6 @@ static int irq_trigger(int idx) /* set before the switch */ break; } - case MP_BUS_MCA: /* MCA pin */ - { - trigger = default_MCA_trigger(idx); - break; - } default: { printk(KERN_WARNING "broken BIOS!!\n"); diff --git a/arch/x86/kernel/mca_32.c b/arch/x86/kernel/mca_32.c deleted file mode 100644 index 7eb1e2b97827..000000000000 --- a/arch/x86/kernel/mca_32.c +++ /dev/null @@ -1,476 +0,0 @@ -/* - * Written by Martin Kolinek, February 1996 - * - * Changes: - * - * Chris Beauregard July 28th, 1996 - * - Fixed up integrated SCSI detection - * - * Chris Beauregard August 3rd, 1996 - * - Made mca_info local - * - Made integrated registers accessible through standard function calls - * - Added name field - * - More sanity checking - * - * Chris Beauregard August 9th, 1996 - * - Rewrote /proc/mca - * - * Chris Beauregard January 7th, 1997 - * - Added basic NMI-processing - * - Added more information to mca_info structure - * - * David Weinehall October 12th, 1998 - * - Made a lot of cleaning up in the source - * - Added use of save_flags / restore_flags - * - Added the 'driver_loaded' flag in MCA_adapter - * - Added an alternative implemention of ZP Gu's mca_find_unused_adapter - * - * David Weinehall March 24th, 1999 - * - Fixed the output of 'Driver Installed' in /proc/mca/pos - * - Made the Integrated Video & SCSI show up even if they have id 0000 - * - * Alexander Viro November 9th, 1999 - * - Switched to regular procfs methods - * - * Alfred Arnold & David Weinehall August 23rd, 2000 - * - Added support for Planar POS-registers - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/mca.h> -#include <linux/kprobes.h> -#include <linux/slab.h> -#include <asm/io.h> -#include <linux/proc_fs.h> -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/pagemap.h> -#include <linux/ioport.h> -#include <asm/uaccess.h> -#include <linux/init.h> - -static unsigned char which_scsi; - -int MCA_bus; -EXPORT_SYMBOL(MCA_bus); - -/* - * Motherboard register spinlock. Untested on SMP at the moment, but - * are there any MCA SMP boxes? - * - * Yes - Alan - */ -static DEFINE_SPINLOCK(mca_lock); - -/* Build the status info for the adapter */ - -static void mca_configure_adapter_status(struct mca_device *mca_dev) -{ - mca_dev->status = MCA_ADAPTER_NONE; - - mca_dev->pos_id = mca_dev->pos[0] - + (mca_dev->pos[1] << 8); - - if (!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) { - - /* - * id = 0x0000 usually indicates hardware failure, - * however, ZP Gu (zpg@castle.net> reports that his 9556 - * has 0x0000 as id and everything still works. There - * also seem to be an adapter with id = 0x0000; the - * NCR Parallel Bus Memory Card. Until this is confirmed, - * however, this code will stay. - */ - - mca_dev->status = MCA_ADAPTER_ERROR; - - return; - } else if (mca_dev->pos_id != 0xffff) { - - /* - * 0xffff usually indicates that there's no adapter, - * however, some integrated adapters may have 0xffff as - * their id and still be valid. Examples are on-board - * VGA of the 55sx, the integrated SCSI of the 56 & 57, - * and possibly also the 95 ULTIMEDIA. - */ - - mca_dev->status = MCA_ADAPTER_NORMAL; - } - - if ((mca_dev->pos_id == 0xffff || - mca_dev->pos_id == 0x0000) && mca_dev->slot >= MCA_MAX_SLOT_NR) { - int j; - - for (j = 2; j < 8; j++) { - if (mca_dev->pos[j] != 0xff) { - mca_dev->status = MCA_ADAPTER_NORMAL; - break; - } - } - } - - if (!(mca_dev->pos[2] & MCA_ENABLED)) { - - /* enabled bit is in POS 2 */ - - mca_dev->status = MCA_ADAPTER_DISABLED; - } -} /* mca_configure_adapter_status */ - -/*--------------------------------------------------------------------*/ - -static struct resource mca_standard_resources[] = { - { .start = 0x60, .end = 0x60, .name = "system control port B (MCA)" }, - { .start = 0x90, .end = 0x90, .name = "arbitration (MCA)" }, - { .start = 0x91, .end = 0x91, .name = "card Select Feedback (MCA)" }, - { .start = 0x92, .end = 0x92, .name = "system Control port A (MCA)" }, - { .start = 0x94, .end = 0x94, .name = "system board setup (MCA)" }, - { .start = 0x96, .end = 0x97, .name = "POS (MCA)" }, - { .start = 0x100, .end = 0x107, .name = "POS (MCA)" } -}; - -#define MCA_STANDARD_RESOURCES ARRAY_SIZE(mca_standard_resources) - -/* - * mca_read_and_store_pos - read the POS registers into a memory buffer - * @pos: a char pointer to 8 bytes, contains the POS register value on - * successful return - * - * Returns 1 if a card actually exists (i.e. the pos isn't - * all 0xff) or 0 otherwise - */ -static int mca_read_and_store_pos(unsigned char *pos) -{ - int j; - int found = 0; - - for (j = 0; j < 8; j++) { - pos[j] = inb_p(MCA_POS_REG(j)); - if (pos[j] != 0xff) { - /* 0xff all across means no device. 0x00 means - * something's broken, but a device is - * probably there. However, if you get 0x00 - * from a motherboard register it won't matter - * what we find. For the record, on the - * 57SLC, the integrated SCSI adapter has - * 0xffff for the adapter ID, but nonzero for - * other registers. */ - - found = 1; - } - } - return found; -} - -static unsigned char mca_pc_read_pos(struct mca_device *mca_dev, int reg) -{ - unsigned char byte; - unsigned long flags; - - if (reg < 0 || reg >= 8) - return 0; - - spin_lock_irqsave(&mca_lock, flags); - if (mca_dev->pos_register) { - /* Disable adapter setup, enable motherboard setup */ - - outb_p(0, MCA_ADAPTER_SETUP_REG); - outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG); - - byte = inb_p(MCA_POS_REG(reg)); - outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); - } else { - - /* Make sure motherboard setup is off */ - - outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); - - /* Read the appropriate register */ - - outb_p(0x8|(mca_dev->slot & 0xf), MCA_ADAPTER_SETUP_REG); - byte = inb_p(MCA_POS_REG(reg)); - outb_p(0, MCA_ADAPTER_SETUP_REG); - } - spin_unlock_irqrestore(&mca_lock, flags); - - mca_dev->pos[reg] = byte; - - return byte; -} - -static void mca_pc_write_pos(struct mca_device *mca_dev, int reg, - unsigned char byte) -{ - unsigned long flags; - - if (reg < 0 || reg >= 8) - return; - - spin_lock_irqsave(&mca_lock, flags); - - /* Make sure motherboard setup is off */ - - outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); - - /* Read in the appropriate register */ - - outb_p(0x8|(mca_dev->slot&0xf), MCA_ADAPTER_SETUP_REG); - outb_p(byte, MCA_POS_REG(reg)); - outb_p(0, MCA_ADAPTER_SETUP_REG); - - spin_unlock_irqrestore(&mca_lock, flags); - - /* Update the global register list, while we have the byte */ - - mca_dev->pos[reg] = byte; - -} - -/* for the primary MCA bus, we have identity transforms */ -static int mca_dummy_transform_irq(struct mca_device *mca_dev, int irq) -{ - return irq; -} - -static int mca_dummy_transform_ioport(struct mca_device *mca_dev, int port) -{ - return port; -} - -static void *mca_dummy_transform_memory(struct mca_device *mca_dev, void *mem) -{ - return mem; -} - - -static int __init mca_init(void) -{ - unsigned int i, j; - struct mca_device *mca_dev; - unsigned char pos[8]; - short mca_builtin_scsi_ports[] = {0xf7, 0xfd, 0x00}; - struct mca_bus *bus; - - /* - * WARNING: Be careful when making changes here. Putting an adapter - * and the motherboard simultaneously into setup mode may result in - * damage to chips (according to The Indispensable PC Hardware Book - * by Hans-Peter Messmer). Also, we disable system interrupts (so - * that we are not disturbed in the middle of this). - */ - - /* Make sure the MCA bus is present */ - - if (mca_system_init()) { - printk(KERN_ERR "MCA bus system initialisation failed\n"); - return -ENODEV; - } - - if (!MCA_bus) - return -ENODEV; - - printk(KERN_INFO "Micro Channel bus detected.\n"); - - /* All MCA systems have at least a primary bus */ - bus = mca_attach_bus(MCA_PRIMARY_BUS); - if (!bus) - goto out_nomem; - bus->default_dma_mask = 0xffffffffLL; - bus->f.mca_write_pos = mca_pc_write_pos; - bus->f.mca_read_pos = mca_pc_read_pos; - bus->f.mca_transform_irq = mca_dummy_transform_irq; - bus->f.mca_transform_ioport = mca_dummy_transform_ioport; - bus->f.mca_transform_memory = mca_dummy_transform_memory; - - /* get the motherboard device */ - mca_dev = kzalloc(sizeof(struct mca_device), GFP_KERNEL); - if (unlikely(!mca_dev)) - goto out_nomem; - - /* - * We do not expect many MCA interrupts during initialization, - * but let us be safe: - */ - spin_lock_irq(&mca_lock); - - /* Make sure adapter setup is off */ - - outb_p(0, MCA_ADAPTER_SETUP_REG); - - /* Read motherboard POS registers */ - - mca_dev->pos_register = 0x7f; - outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG); - mca_dev->name[0] = 0; - mca_read_and_store_pos(mca_dev->pos); - mca_configure_adapter_status(mca_dev); - /* fake POS and slot for a motherboard */ - mca_dev->pos_id = MCA_MOTHERBOARD_POS; - mca_dev->slot = MCA_MOTHERBOARD; - mca_register_device(MCA_PRIMARY_BUS, mca_dev); - - mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC); - if (unlikely(!mca_dev)) - goto out_unlock_nomem; - - /* Put motherboard into video setup mode, read integrated video - * POS registers, and turn motherboard setup off. - */ - - mca_dev->pos_register = 0xdf; - outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG); - mca_dev->name[0] = 0; - mca_read_and_store_pos(mca_dev->pos); - mca_configure_adapter_status(mca_dev); - /* fake POS and slot for the integrated video */ - mca_dev->pos_id = MCA_INTEGVIDEO_POS; - mca_dev->slot = MCA_INTEGVIDEO; - mca_register_device(MCA_PRIMARY_BUS, mca_dev); - - /* - * Put motherboard into scsi setup mode, read integrated scsi - * POS registers, and turn motherboard setup off. - * - * It seems there are two possible SCSI registers. Martin says that - * for the 56,57, 0xf7 is the one, but fails on the 76. - * Alfredo (apena@vnet.ibm.com) says - * 0xfd works on his machine. We'll try both of them. I figure it's - * a good bet that only one could be valid at a time. This could - * screw up though if one is used for something else on the other - * machine. - */ - - for (i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) { - outb_p(which_scsi, MCA_MOTHERBOARD_SETUP_REG); - if (mca_read_and_store_pos(pos)) - break; - } - if (which_scsi) { - /* found a scsi card */ - mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC); - if (unlikely(!mca_dev)) - goto out_unlock_nomem; - - for (j = 0; j < 8; j++) - mca_dev->pos[j] = pos[j]; - - mca_configure_adapter_status(mca_dev); - /* fake POS and slot for integrated SCSI controller */ - mca_dev->pos_id = MCA_INTEGSCSI_POS; - mca_dev->slot = MCA_INTEGSCSI; - mca_dev->pos_register = which_scsi; - mca_register_device(MCA_PRIMARY_BUS, mca_dev); - } - - /* Turn off motherboard setup */ - - outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); - - /* - * Now loop over MCA slots: put each adapter into setup mode, and - * read its POS registers. Then put adapter setup off. - */ - - for (i = 0; i < MCA_MAX_SLOT_NR; i++) { - outb_p(0x8|(i&0xf), MCA_ADAPTER_SETUP_REG); - if (!mca_read_and_store_pos(pos)) - continue; - - mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC); - if (unlikely(!mca_dev)) - goto out_unlock_nomem; - - for (j = 0; j < 8; j++) - mca_dev->pos[j] = pos[j]; - - mca_dev->driver_loaded = 0; - mca_dev->slot = i; - mca_dev->pos_register = 0; - mca_configure_adapter_status(mca_dev); - mca_register_device(MCA_PRIMARY_BUS, mca_dev); - } - outb_p(0, MCA_ADAPTER_SETUP_REG); - - /* Enable interrupts and return memory start */ - spin_unlock_irq(&mca_lock); - - for (i = 0; i < MCA_STANDARD_RESOURCES; i++) - request_resource(&ioport_resource, mca_standard_resources + i); - - mca_do_proc_init(); - - return 0; - - out_unlock_nomem: - spin_unlock_irq(&mca_lock); - out_nomem: - printk(KERN_EMERG "Failed memory allocation in MCA setup!\n"); - return -ENOMEM; -} - -subsys_initcall(mca_init); - -/*--------------------------------------------------------------------*/ - -static __kprobes void -mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag) -{ - int slot = mca_dev->slot; - - if (slot == MCA_INTEGSCSI) { - printk(KERN_CRIT "NMI: caused by MCA integrated SCSI adapter (%s)\n", - mca_dev->name); - } else if (slot == MCA_INTEGVIDEO) { - printk(KERN_CRIT "NMI: caused by MCA integrated video adapter (%s)\n", - mca_dev->name); - } else if (slot == MCA_MOTHERBOARD) { - printk(KERN_CRIT "NMI: caused by motherboard (%s)\n", - mca_dev->name); - } - - /* More info available in POS 6 and 7? */ - - if (check_flag) { - unsigned char pos6, pos7; - - pos6 = mca_device_read_pos(mca_dev, 6); - pos7 = mca_device_read_pos(mca_dev, 7); - - printk(KERN_CRIT "NMI: POS 6 = 0x%x, POS 7 = 0x%x\n", pos6, pos7); - } - -} /* mca_handle_nmi_slot */ - -/*--------------------------------------------------------------------*/ - -static int __kprobes mca_handle_nmi_callback(struct device *dev, void *data) -{ - struct mca_device *mca_dev = to_mca_device(dev); - unsigned char pos5; - - pos5 = mca_device_read_pos(mca_dev, 5); - - if (!(pos5 & 0x80)) { - /* - * Bit 7 of POS 5 is reset when this adapter has a hardware - * error. Bit 7 it reset if there's error information - * available in POS 6 and 7. - */ - mca_handle_nmi_device(mca_dev, !(pos5 & 0x40)); - return 1; - } - return 0; -} - -void __kprobes mca_handle_nmi(void) -{ - /* - * First try - scan the various adapters and see if a specific - * adapter was responsible for the error. - */ - bus_for_each_dev(&mca_bus_type, NULL, NULL, mca_handle_nmi_callback); -} diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index ca470e4c92dc..b02d4dd6b8a3 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -97,7 +97,7 @@ static void __init MP_bus_info(struct mpc_bus *m) set_bit(m->busid, mp_bus_not_pci); if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) { -#if defined(CONFIG_EISA) || defined(CONFIG_MCA) +#ifdef CONFIG_EISA mp_bus_id_to_type[m->busid] = MP_BUS_ISA; #endif } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) { @@ -105,12 +105,10 @@ static void __init MP_bus_info(struct mpc_bus *m) x86_init.mpparse.mpc_oem_pci_bus(m); clear_bit(m->busid, mp_bus_not_pci); -#if defined(CONFIG_EISA) || defined(CONFIG_MCA) +#ifdef CONFIG_EISA mp_bus_id_to_type[m->busid] = MP_BUS_PCI; } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) { mp_bus_id_to_type[m->busid] = MP_BUS_EISA; - } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA) - 1) == 0) { - mp_bus_id_to_type[m->busid] = MP_BUS_MCA; #endif } else printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str); @@ -368,9 +366,6 @@ static void __init construct_ioapic_table(int mpc_default_type) case 3: memcpy(bus.bustype, "EISA ", 6); break; - case 4: - case 7: - memcpy(bus.bustype, "MCA ", 6); } MP_bus_info(&bus); if (mpc_default_type > 4) { @@ -623,7 +618,7 @@ void __init default_find_smp_config(void) return; /* * If it is an SMP machine we should know now, unless the - * configuration is in an EISA/MCA bus machine with an + * configuration is in an EISA bus machine with an * extended bios data area. * * there is a real-mode segmented pointer pointing to the diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index bffdfd48c1f2..90875279ef3d 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -19,8 +19,6 @@ #include <linux/slab.h> #include <linux/export.h> -#include <linux/mca.h> - #if defined(CONFIG_EDAC) #include <linux/edac.h> #endif @@ -247,16 +245,6 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs) __this_cpu_add(nmi_stats.unknown, 1); -#ifdef CONFIG_MCA - /* - * Might actually be able to figure out what the guilty party - * is: - */ - if (MCA_bus) { - mca_handle_nmi(); - return; - } -#endif pr_emerg("Uhhuh. NMI received for unknown reason %02x on CPU %d.\n", reason, smp_processor_id()); diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 9b4204e06665..366c688d619e 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -34,7 +34,6 @@ #include <linux/memblock.h> #include <linux/seq_file.h> #include <linux/console.h> -#include <linux/mca.h> #include <linux/root_dev.h> #include <linux/highmem.h> #include <linux/module.h> @@ -179,12 +178,6 @@ struct cpuinfo_x86 new_cpu_data __cpuinitdata = {0, 0, 0, 0, -1, 1, 0, 0, -1}; /* common cpu data for all cpus */ struct cpuinfo_x86 boot_cpu_data __read_mostly = {0, 0, 0, 0, -1, 1, 0, 0, -1}; EXPORT_SYMBOL(boot_cpu_data); -static void set_mca_bus(int x) -{ -#ifdef CONFIG_MCA - MCA_bus = x; -#endif -} unsigned int def_to_bigsmp; @@ -716,7 +709,6 @@ void __init setup_arch(char **cmdline_p) apm_info.bios = boot_params.apm_bios_info; ist_info = boot_params.ist_info; if (boot_params.sys_desc_table.length != 0) { - set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2); machine_id = boot_params.sys_desc_table.table[0]; machine_submodel_id = boot_params.sys_desc_table.table[1]; BIOS_revision = boot_params.sys_desc_table.table[2]; diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c index c6eba2b42673..24d3c91e9812 100644 --- a/arch/x86/kernel/time.c +++ b/arch/x86/kernel/time.c @@ -14,7 +14,6 @@ #include <linux/i8253.h> #include <linux/time.h> #include <linux/export.h> -#include <linux/mca.h> #include <asm/vsyscall.h> #include <asm/x86_init.h> @@ -58,11 +57,6 @@ EXPORT_SYMBOL(profile_pc); static irqreturn_t timer_interrupt(int irq, void *dev_id) { global_clock_event->event_handler(global_clock_event); - - /* MCA bus quirk: Acknowledge irq0 by setting bit 7 in port 0x61 */ - if (MCA_bus) - outb_p(inb_p(0x61)| 0x80, 0x61); - return IRQ_HANDLED; } diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 92d5756d85fc..ff08457a025d 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -37,10 +37,6 @@ #include <linux/eisa.h> #endif -#ifdef CONFIG_MCA -#include <linux/mca.h> -#endif - #if defined(CONFIG_EDAC) #include <linux/edac.h> #endif |
