summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel')
-rw-r--r--arch/x86/kernel/Makefile1
-rw-r--r--arch/x86/kernel/apic/apic.c8
-rw-r--r--arch/x86/kernel/apic/io_apic.c4
-rw-r--r--arch/x86/kernel/apic/probe_64.c7
-rw-r--r--arch/x86/kernel/cpu/perf_event.c20
-rw-r--r--arch/x86/kernel/head_32.S16
-rw-r--r--arch/x86/kernel/hpet.c26
-rw-r--r--arch/x86/kernel/pvclock.c5
-rw-r--r--arch/x86/kernel/resource.c48
-rw-r--r--arch/x86/kernel/setup.c1
-rw-r--r--arch/x86/kernel/xsave.c3
11 files changed, 111 insertions, 28 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 9e13763b6092..1e994754d323 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -45,6 +45,7 @@ obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o
obj-y += tsc.o io_delay.o rtc.o
obj-y += pci-iommu_table.o
+obj-y += resource.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
obj-y += process.o
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 3f838d537392..78218135b48e 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1389,6 +1389,14 @@ void __cpuinit end_local_APIC_setup(void)
setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
+
+ /*
+ * Now that local APIC setup is completed for BP, configure the fault
+ * handling for interrupt remapping.
+ */
+ if (!smp_processor_id() && intr_remapping_enabled)
+ enable_drhd_fault_handling();
+
}
#ifdef CONFIG_X86_X2APIC
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 7cc0a721f628..fadcd743a74f 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2430,13 +2430,12 @@ static void ack_apic_level(struct irq_data *data)
{
struct irq_cfg *cfg = data->chip_data;
int i, do_unmask_irq = 0, irq = data->irq;
- struct irq_desc *desc = irq_to_desc(irq);
unsigned long v;
irq_complete_move(cfg);
#ifdef CONFIG_GENERIC_PENDING_IRQ
/* If we are moving the irq we need to mask it */
- if (unlikely(desc->status & IRQ_MOVE_PENDING)) {
+ if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) {
do_unmask_irq = 1;
mask_ioapic(cfg);
}
@@ -3413,6 +3412,7 @@ dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask,
msg.data |= MSI_DATA_VECTOR(cfg->vector);
msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+ msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest);
dmar_msi_write(irq, &msg);
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index f9e4e6a54073..d8c4a6feb286 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -79,13 +79,6 @@ void __init default_setup_apic_routing(void)
/* need to update phys_pkg_id */
apic->phys_pkg_id = apicid_phys_pkg_id;
}
-
- /*
- * Now that apic routing model is selected, configure the
- * fault handling for intr remapping.
- */
- if (intr_remapping_enabled)
- enable_drhd_fault_handling();
}
/* Same for both flat and physical. */
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index ed6310183efb..6d75b9145b13 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -381,6 +381,20 @@ static void release_pmc_hardware(void) {}
#endif
+static bool check_hw_exists(void)
+{
+ u64 val, val_new = 0;
+ int ret = 0;
+
+ val = 0xabcdUL;
+ ret |= checking_wrmsrl(x86_pmu.perfctr, val);
+ ret |= rdmsrl_safe(x86_pmu.perfctr, &val_new);
+ if (ret || val != val_new)
+ return false;
+
+ return true;
+}
+
static void reserve_ds_buffers(void);
static void release_ds_buffers(void);
@@ -1372,6 +1386,12 @@ void __init init_hw_perf_events(void)
pmu_check_apic();
+ /* sanity check that the hardware exists or is emulated */
+ if (!check_hw_exists()) {
+ pr_cont("Broken PMU hardware detected, software events only.\n");
+ return;
+ }
+
pr_cont("%s PMU driver.\n", x86_pmu.name);
if (x86_pmu.quirks)
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index bcece91dd311..c0dbd9ac24f0 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -60,16 +60,18 @@
#define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
#endif
+/* Number of possible pages in the lowmem region */
+LOWMEM_PAGES = (((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT)
+
/* Enough space to fit pagetables for the low memory linear map */
-MAPPING_BEYOND_END = \
- PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT
+MAPPING_BEYOND_END = PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT
/*
* Worst-case size of the kernel mapping we need to make:
- * the worst-case size of the kernel itself, plus the extra we need
- * to map for the linear map.
+ * a relocatable kernel can live anywhere in lowmem, so we need to be able
+ * to map all of lowmem.
*/
-KERNEL_PAGES = (KERNEL_IMAGE_SIZE + MAPPING_BEYOND_END)>>PAGE_SHIFT
+KERNEL_PAGES = LOWMEM_PAGES
INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE_asm
RESERVE_BRK(pagetables, INIT_MAP_SIZE)
@@ -620,13 +622,13 @@ ENTRY(initial_code)
__PAGE_ALIGNED_BSS
.align PAGE_SIZE_asm
#ifdef CONFIG_X86_PAE
-initial_pg_pmd:
+ENTRY(initial_pg_pmd)
.fill 1024*KPMDS,4,0
#else
ENTRY(initial_page_table)
.fill 1024,4,0
#endif
-initial_pg_fixmap:
+ENTRY(initial_pg_fixmap)
.fill 1024,4,0
ENTRY(empty_zero_page)
.fill 4096,1,0
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index ae03cab4352e..4ff5968f12d2 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -27,6 +27,9 @@
#define HPET_DEV_FSB_CAP 0x1000
#define HPET_DEV_PERI_CAP 0x2000
+#define HPET_MIN_CYCLES 128
+#define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
+
#define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt)
/*
@@ -299,8 +302,9 @@ static void hpet_legacy_clockevent_register(void)
/* Calculate the min / max delta */
hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
&hpet_clockevent);
- /* 5 usec minimum reprogramming delta. */
- hpet_clockevent.min_delta_ns = 5000;
+ /* Setup minimum reprogramming delta. */
+ hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA,
+ &hpet_clockevent);
/*
* Start hpet with the boot cpu mask and make it
@@ -393,22 +397,24 @@ static int hpet_next_event(unsigned long delta,
* the wraparound into account) nor a simple count down event
* mode. Further the write to the comparator register is
* delayed internally up to two HPET clock cycles in certain
- * chipsets (ATI, ICH9,10). We worked around that by reading
- * back the compare register, but that required another
- * workaround for ICH9,10 chips where the first readout after
- * write can return the old stale value. We already have a
- * minimum delta of 5us enforced, but a NMI or SMI hitting
+ * chipsets (ATI, ICH9,10). Some newer AMD chipsets have even
+ * longer delays. We worked around that by reading back the
+ * compare register, but that required another workaround for
+ * ICH9,10 chips where the first readout after write can
+ * return the old stale value. We already had a minimum
+ * programming delta of 5us enforced, but a NMI or SMI hitting
* between the counter readout and the comparator write can
* move us behind that point easily. Now instead of reading
* the compare register back several times, we make the ETIME
* decision based on the following: Return ETIME if the
- * counter value after the write is less than 8 HPET cycles
+ * counter value after the write is less than HPET_MIN_CYCLES
* away from the event or if the counter is already ahead of
- * the event.
+ * the event. The minimum programming delta for the generic
+ * clockevents code is set to 1.5 * HPET_MIN_CYCLES.
*/
res = (s32)(cnt - hpet_readl(HPET_COUNTER));
- return res < 8 ? -ETIME : 0;
+ return res < HPET_MIN_CYCLES ? -ETIME : 0;
}
static void hpet_legacy_set_mode(enum clock_event_mode mode,
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index 008b91eefa18..42eb3300dfc6 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -83,6 +83,11 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src)
static atomic64_t last_value = ATOMIC64_INIT(0);
+void pvclock_resume(void)
+{
+ atomic64_set(&last_value, 0);
+}
+
cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
{
struct pvclock_shadow_time shadow;
diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c
new file mode 100644
index 000000000000..2a26819bb6a8
--- /dev/null
+++ b/arch/x86/kernel/resource.c
@@ -0,0 +1,48 @@
+#include <linux/ioport.h>
+#include <asm/e820.h>
+
+static void resource_clip(struct resource *res, resource_size_t start,
+ resource_size_t end)
+{
+ resource_size_t low = 0, high = 0;
+
+ if (res->end < start || res->start > end)
+ return; /* no conflict */
+
+ if (res->start < start)
+ low = start - res->start;
+
+ if (res->end > end)
+ high = res->end - end;
+
+ /* Keep the area above or below the conflict, whichever is larger */
+ if (low > high)
+ res->end = start - 1;
+ else
+ res->start = end + 1;
+}
+
+static void remove_e820_regions(struct resource *avail)
+{
+ int i;
+ struct e820entry *entry;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ entry = &e820.map[i];
+
+ resource_clip(avail, entry->addr,
+ entry->addr + entry->size - 1);
+ }
+}
+
+void arch_remove_reservations(struct resource *avail)
+{
+ /* Trim out BIOS areas (low 1MB and high 2MB) and E820 regions */
+ if (avail->flags & IORESOURCE_MEM) {
+ if (avail->start < BIOS_END)
+ avail->start = BIOS_END;
+ resource_clip(avail, BIOS_ROM_BASE, BIOS_ROM_END);
+
+ remove_e820_regions(avail);
+ }
+}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 21c6746338af..85268f8eadf6 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -769,7 +769,6 @@ void __init setup_arch(char **cmdline_p)
x86_init.oem.arch_setup();
- resource_alloc_from_bottom = 0;
iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1;
setup_memory_map();
parse_setup_data();
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index 9c253bd65e24..547128546cc3 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -394,7 +394,8 @@ static void __init setup_xstate_init(void)
* Setup init_xstate_buf to represent the init state of
* all the features managed by the xsave
*/
- init_xstate_buf = alloc_bootmem(xstate_size);
+ init_xstate_buf = alloc_bootmem_align(xstate_size,
+ __alignof__(struct xsave_struct));
init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
clts();
OpenPOWER on IntegriCloud