diff options
Diffstat (limited to 'arch/x86/kernel/apic_64.c')
| -rw-r--r-- | arch/x86/kernel/apic_64.c | 1259 |
1 files changed, 643 insertions, 616 deletions
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index f28ccb588fba..d8d03e09dea2 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -23,32 +23,37 @@ #include <linux/mc146818rtc.h> #include <linux/kernel_stat.h> #include <linux/sysdev.h> -#include <linux/module.h> #include <linux/ioport.h> #include <linux/clockchips.h> +#include <linux/acpi_pmtmr.h> +#include <linux/module.h> #include <asm/atomic.h> #include <asm/smp.h> #include <asm/mtrr.h> #include <asm/mpspec.h> +#include <asm/hpet.h> #include <asm/pgalloc.h> #include <asm/mach_apic.h> #include <asm/nmi.h> #include <asm/idle.h> #include <asm/proto.h> #include <asm/timex.h> -#include <asm/hpet.h> #include <asm/apic.h> -int apic_verbosity; int disable_apic_timer __cpuinitdata; static int apic_calibrate_pmtmr __initdata; +int disable_apic; -/* Local APIC timer works in C2? */ +/* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); -static struct resource *ioapic_resources; +/* + * Debug level, exported for io_apic.c + */ +int apic_verbosity; + static struct resource lapic_resource = { .name = "Local APIC", .flags = IORESOURCE_MEM | IORESOURCE_BUSY, @@ -60,10 +65,8 @@ static int lapic_next_event(unsigned long delta, struct clock_event_device *evt); static void lapic_timer_setup(enum clock_event_mode mode, struct clock_event_device *evt); - static void lapic_timer_broadcast(cpumask_t mask); - -static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen); +static void apic_pm_activate(void); static struct clock_event_device lapic_clockevent = { .name = "lapic", @@ -78,6 +81,150 @@ static struct clock_event_device lapic_clockevent = { }; static DEFINE_PER_CPU(struct clock_event_device, lapic_events); +static unsigned long apic_phys; + +/* + * Get the LAPIC version + */ +static inline int lapic_get_version(void) +{ + return GET_APIC_VERSION(apic_read(APIC_LVR)); +} + +/* + * Check, if the APIC is integrated or a seperate chip + */ +static inline int lapic_is_integrated(void) +{ + return 1; +} + +/* + * Check, whether this is a modern or a first generation APIC + */ +static int modern_apic(void) +{ + /* AMD systems use old APIC versions, so check the CPU */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && + boot_cpu_data.x86 >= 0xf) + return 1; + return lapic_get_version() >= 0x14; +} + +void apic_wait_icr_idle(void) +{ + while (apic_read(APIC_ICR) & APIC_ICR_BUSY) + cpu_relax(); +} + +u32 safe_apic_wait_icr_idle(void) +{ + u32 send_status; + int timeout; + + timeout = 0; + do { + send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY; + if (!send_status) + break; + udelay(100); + } while (timeout++ < 1000); + + return send_status; +} + +/** + * enable_NMI_through_LVT0 - enable NMI through local vector table 0 + */ +void __cpuinit enable_NMI_through_LVT0(void) +{ + unsigned int v; + + /* unmask and set to NMI */ + v = APIC_DM_NMI; + apic_write(APIC_LVT0, v); +} + +/** + * lapic_get_maxlvt - get the maximum number of local vector table entries + */ +int lapic_get_maxlvt(void) +{ + unsigned int v, maxlvt; + + v = apic_read(APIC_LVR); + maxlvt = GET_APIC_MAXLVT(v); + return maxlvt; +} + +/* + * This function sets up the local APIC timer, with a timeout of + * 'clocks' APIC bus clock. During calibration we actually call + * this function twice on the boot CPU, once with a bogus timeout + * value, second time for real. The other (noncalibrating) CPUs + * call this function only once, with the real, calibrated value. + * + * We do reads before writes even if unnecessary, to get around the + * P5 APIC double write bug. + */ + +static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) +{ + unsigned int lvtt_value, tmp_value; + + lvtt_value = LOCAL_TIMER_VECTOR; + if (!oneshot) + lvtt_value |= APIC_LVT_TIMER_PERIODIC; + if (!irqen) + lvtt_value |= APIC_LVT_MASKED; + + apic_write(APIC_LVTT, lvtt_value); + + /* + * Divide PICLK by 16 + */ + tmp_value = apic_read(APIC_TDCR); + apic_write(APIC_TDCR, (tmp_value + & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) + | APIC_TDR_DIV_16); + + if (!oneshot) + apic_write(APIC_TMICT, clocks); +} + +/* + * Setup extended LVT, AMD specific (K8, family 10h) + * + * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and + * MCE interrupts are supported. Thus MCE offset must be set to 0. + */ + +#define APIC_EILVT_LVTOFF_MCE 0 +#define APIC_EILVT_LVTOFF_IBS 1 + +static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask) +{ + unsigned long reg = (lvt_off << 4) + APIC_EILVT0; + unsigned int v = (mask << 16) | (msg_type << 8) | vector; + + apic_write(reg, v); +} + +u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask) +{ + setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask); + return APIC_EILVT_LVTOFF_MCE; +} + +u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask) +{ + setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask); + return APIC_EILVT_LVTOFF_IBS; +} + +/* + * Program the next event, relative to now + */ static int lapic_next_event(unsigned long delta, struct clock_event_device *evt) { @@ -85,6 +232,9 @@ static int lapic_next_event(unsigned long delta, return 0; } +/* + * Setup the lapic timer in periodic or oneshot mode + */ static void lapic_timer_setup(enum clock_event_mode mode, struct clock_event_device *evt) { @@ -127,75 +277,261 @@ static void lapic_timer_broadcast(cpumask_t mask) #endif } -static void apic_pm_activate(void); +/* + * Setup the local APIC timer for this CPU. Copy the initilized values + * of the boot CPU and register the clock event in the framework. + */ +static void setup_APIC_timer(void) +{ + struct clock_event_device *levt = &__get_cpu_var(lapic_events); -void apic_wait_icr_idle(void) + memcpy(levt, &lapic_clockevent, sizeof(*levt)); + levt->cpumask = cpumask_of_cpu(smp_processor_id()); + + clockevents_register_device(levt); +} + +/* + * In this function we calibrate APIC bus clocks to the external + * timer. Unfortunately we cannot use jiffies and the timer irq + * to calibrate, since some later bootup code depends on getting + * the first irq? Ugh. + * + * We want to do the calibration only once since we + * want to have local timer irqs syncron. CPUs connected + * by the same APIC bus have the very same bus frequency. + * And we want to have irqs off anyways, no accidental + * APIC irq that way. + */ + +#define TICK_COUNT 100000000 + +static void __init calibrate_APIC_clock(void) { - while (apic_read(APIC_ICR) & APIC_ICR_BUSY) - cpu_relax(); + unsigned apic, apic_start; + unsigned long tsc, tsc_start; + int result; + + local_irq_disable(); + + /* + * Put whatever arbitrary (but long enough) timeout + * value into the APIC clock, we just want to get the + * counter running for calibration. + * + * No interrupt enable ! + */ + __setup_APIC_LVTT(250000000, 0, 0); + + apic_start = apic_read(APIC_TMCCT); +#ifdef CONFIG_X86_PM_TIMER + if (apic_calibrate_pmtmr && pmtmr_ioport) { + pmtimer_wait(5000); /* 5ms wait */ + apic = apic_read(APIC_TMCCT); + result = (apic_start - apic) * 1000L / 5; + } else +#endif + { + rdtscll(tsc_start); + + do { + apic = apic_read(APIC_TMCCT); + rdtscll(tsc); + } while ((tsc - tsc_start) < TICK_COUNT && + (apic_start - apic) < TICK_COUNT); + + result = (apic_start - apic) * 1000L * tsc_khz / + (tsc - tsc_start); + } + + local_irq_enable(); + + printk(KERN_DEBUG "APIC timer calibration result %d\n", result); + + printk(KERN_INFO "Detected %d.%03d MHz APIC timer.\n", + result / 1000 / 1000, result / 1000 % 1000); + + /* Calculate the scaled math multiplication factor */ + lapic_clockevent.mult = div_sc(result, NSEC_PER_SEC, 32); + lapic_clockevent.max_delta_ns = + clockevent_delta2ns(0x7FFFFF, &lapic_clockevent); + lapic_clockevent.min_delta_ns = + clockevent_delta2ns(0xF, &lapic_clockevent); + + calibration_result = result / HZ; } -unsigned int safe_apic_wait_icr_idle(void) +/* + * Setup the boot APIC + * + * Calibrate and verify the result. + */ +void __init setup_boot_APIC_clock(void) { - unsigned int send_status; - int timeout; + /* + * The local apic timer can be disabled via the kernel commandline. + * Register the lapic timer as a dummy clock event source on SMP + * systems, so the broadcast mechanism is used. On UP systems simply + * ignore it. + */ + if (disable_apic_timer) { + printk(KERN_INFO "Disabling APIC timer\n"); + /* No broadcast on UP ! */ + if (num_possible_cpus() > 1) { + lapic_clockevent.mult = 1; + setup_APIC_timer(); + } + return; + } - timeout = 0; - do { - send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY; - if (!send_status) - break; - udelay(100); - } while (timeout++ < 1000); + printk(KERN_INFO "Using local APIC timer interrupts.\n"); + calibrate_APIC_clock(); - return send_status; + /* + * Do a sanity check on the APIC calibration result + */ + if (calibration_result < (1000000 / HZ)) { + printk(KERN_WARNING + "APIC frequency too slow, disabling apic timer\n"); + /* No broadcast on UP ! */ + if (num_possible_cpus() > 1) + setup_APIC_timer(); + return; + } + + /* + * If nmi_watchdog is set to IO_APIC, we need the + * PIT/HPET going. Otherwise register lapic as a dummy + * device. + */ + if (nmi_watchdog != NMI_IO_APIC) + lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; + else + printk(KERN_WARNING "APIC timer registered as dummy," + " due to nmi_watchdog=1!\n"); + + setup_APIC_timer(); } -void enable_NMI_through_LVT0 (void * dummy) +/* + * AMD C1E enabled CPUs have a real nasty problem: Some BIOSes set the + * C1E flag only in the secondary CPU, so when we detect the wreckage + * we already have enabled the boot CPU local apic timer. Check, if + * disable_apic_timer is set and the DUMMY flag is cleared. If yes, + * set the DUMMY flag again and force the broadcast mode in the + * clockevents layer. + */ +void __cpuinit check_boot_apic_timer_broadcast(void) { - unsigned int v; + if (!disable_apic_timer || + (lapic_clockevent.features & CLOCK_EVT_FEAT_DUMMY)) + return; - /* unmask and set to NMI */ - v = APIC_DM_NMI; - apic_write(APIC_LVT0, v); + printk(KERN_INFO "AMD C1E detected late. Force timer broadcast.\n"); + lapic_clockevent.features |= CLOCK_EVT_FEAT_DUMMY; + + local_irq_enable(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, &boot_cpu_id); + local_irq_disable(); } -int get_maxlvt(void) +void __cpuinit setup_secondary_APIC_clock(void) { - unsigned int v, maxlvt; + check_boot_apic_timer_broadcast(); + setup_APIC_timer(); +} - v = apic_read(APIC_LVR); - maxlvt = GET_APIC_MAXLVT(v); - return maxlvt; +/* + * The guts of the apic timer interrupt + */ +static void local_apic_timer_interrupt(void) +{ + int cpu = smp_processor_id(); + struct clock_event_device *evt = &per_cpu(lapic_events, cpu); + + /* + * Normally we should not be here till LAPIC has been initialized but + * in some cases like kdump, its possible that there is a pending LAPIC + * timer interrupt from previous kernel's context and is delivered in + * new kernel the moment interrupts are enabled. + * + * Interrupts are enabled early and LAPIC is setup much later, hence + * its possible that when we get here evt->event_handler is NULL. + * Check for event_handler being NULL and discard the interrupt as + * spurious. + */ + if (!evt->event_handler) { + printk(KERN_WARNING + "Spurious LAPIC timer interrupt on cpu %d\n", cpu); + /* Switch it off */ + lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt); + return; + } + + /* + * the NMI deadlock-detector uses this. + */ + add_pda(apic_timer_irqs, 1); + + evt->event_handler(evt); } /* - * 'what should we do if we get a hw irq event on an illegal vector'. - * each architecture has to answer this themselves. + * Local APIC timer interrupt. This is the most natural way for doing + * local interrupts, but local timer interrupts can be emulated by + * broadcast interrupts too. [in case the hw doesn't support APIC timers] + * + * [ if a single-CPU system runs an SMP kernel then we call the local + * interrupt as well. Thus we cannot inline the local irq ... ] */ -void ack_bad_irq(unsigned int irq) +void smp_apic_timer_interrupt(struct pt_regs *regs) { - printk("unexpected IRQ trap at vector %02x\n", irq); + struct pt_regs *old_regs = set_irq_regs(regs); + /* - * Currently unexpected vectors happen only on SMP and APIC. - * We _must_ ack these because every local APIC has only N - * irq slots per priority level, and a 'hanging, unacked' IRQ - * holds up an irq slot - in excessive cases (when multiple - * unexpected vectors occur) that might lock up the APIC - * completely. - * But don't ack when the APIC is disabled. -AK + * NOTE! We'd better ACK the irq immediately, + * because timer handling can be slow. */ - if (!disable_apic) - ack_APIC_irq(); + ack_APIC_irq(); + /* + * update_process_times() expects us to have done irq_enter(). + * Besides, if we don't timer interrupts ignore the global + * interrupt lock, which is the WrongThing (tm) to do. + */ + exit_idle(); + irq_enter(); + local_apic_timer_interrupt(); + irq_exit(); + set_irq_regs(old_regs); +} + +int setup_profiling_timer(unsigned int multiplier) +{ + return -EINVAL; } + +/* + * Local APIC start and shutdown + */ + +/** + * clear_local_APIC - shutdown the local APIC + * + * This is called, when a CPU is disabled and before rebooting, so the state of + * the local APIC has no dangling leftovers. Also used to cleanout any BIOS + * leftovers during boot. + */ void clear_local_APIC(void) { - int maxlvt; - unsigned int v; + int maxlvt = lapic_get_maxlvt(); + u32 v; - maxlvt = get_maxlvt(); + /* APIC hasn't been mapped yet */ + if (!apic_phys) + return; + maxlvt = lapic_get_maxlvt(); /* * Masking an LVT entry can trigger a local APIC error * if the vector is zero. Mask LVTERR first to prevent this. @@ -233,45 +569,9 @@ void clear_local_APIC(void) apic_read(APIC_ESR); } -void disconnect_bsp_APIC(int virt_wire_setup) -{ - /* Go back to Virtual Wire compatibility mode */ - unsigned long value; - - /* For the spurious interrupt use vector F, and enable it */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= 0xf; - apic_write(APIC_SPIV, value); - - if (!virt_wire_setup) { - /* - * For LVT0 make it edge triggered, active high, - * external and enabled - */ - value = apic_read(APIC_LVT0); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); - apic_write(APIC_LVT0, value); - } else { - /* Disable LVT0 */ - apic_write(APIC_LVT0, APIC_LVT_MASKED); - } - - /* For LVT1 make it edge triggered, active high, nmi and enabled */ - value = apic_read(APIC_LVT1); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); - apic_write(APIC_LVT1, value); -} - +/** + * disable_local_APIC - clear and disable the local APIC + */ void disable_local_APIC(void) { unsigned int value; @@ -333,7 +633,7 @@ int __init verify_local_APIC(void) reg1 = GET_APIC_VERSION(reg0); if (reg1 == 0x00 || reg1 == 0xff) return 0; - reg1 = get_maxlvt(); + reg1 = lapic_get_maxlvt(); if (reg1 < 0x02 || reg1 == 0xff) return 0; @@ -355,18 +655,20 @@ int __init verify_local_APIC(void) * compatibility mode, but most boxes are anymore. */ reg0 = apic_read(APIC_LVT0); - apic_printk(APIC_DEBUG,"Getting LVT0: %x\n", reg0); + apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0); reg1 = apic_read(APIC_LVT1); apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1); return 1; } +/** + * sync_Arb_IDs - synchronize APIC bus arbitration IDs + */ void __init sync_Arb_IDs(void) { /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */ - unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR)); - if (ver >= 0x14) /* P4 or higher */ + if (modern_apic()) return; /* @@ -418,9 +720,12 @@ void __init init_bsp_APIC(void) apic_write(APIC_LVT1, value); } -void __cpuinit setup_local_APIC (void) +/** + * setup_local_APIC - setup the local APIC + */ +void __cpuinit setup_local_APIC(void) { - unsigned int value, maxlvt; + unsigned int value; int i, j; value = apic_read(APIC_LVR); @@ -516,30 +821,217 @@ void __cpuinit setup_local_APIC (void) else value = APIC_DM_NMI | APIC_LVT_MASKED; apic_write(APIC_LVT1, value); +} - { - unsigned oldvalue; - maxlvt = get_maxlvt(); - oldvalue = apic_read(APIC_ESR); - value = ERROR_APIC_VECTOR; // enables sending errors - apic_write(APIC_LVTERR, value); - /* - * spec says clear errors after enabling vector. - */ - if (maxlvt > 3) - apic_write(APIC_ESR, 0); - value = apic_read(APIC_ESR); - if (value != oldvalue) - apic_printk(APIC_VERBOSE, - "ESR value after enabling vector: %08x, after %08x\n", - oldvalue, value); - } +void __cpuinit lapic_setup_esr(void) +{ + unsigned maxlvt = lapic_get_maxlvt(); + + apic_write(APIC_LVTERR, ERROR_APIC_VECTOR); + /* + * spec says clear errors after enabling vector. + */ + if (maxlvt > 3) + apic_write(APIC_ESR, 0); +} +void __cpuinit end_local_APIC_setup(void) +{ + lapic_setup_esr(); nmi_watchdog_default(); setup_apic_nmi_watchdog(NULL); apic_pm_activate(); } +/* + * Detect and enable local APICs on non-SMP boards. + * Original code written by Keir Fraser. + * On AMD64 we trust the BIOS - if it says no APIC it is likely + * not correctly set up (usually the APIC timer won't work etc.) + */ +static int __init detect_init_APIC(void) +{ + if (!cpu_has_apic) { + printk(KERN_INFO "No local APIC present\n"); + return -1; + } + + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + boot_cpu_id = 0; + return 0; +} + +/** + * init_apic_mappings - initialize APIC mappings + */ +void __init init_apic_mappings(void) +{ + /* + * If no local APIC can be found then set up a fake all + * zeroes page to simulate the local APIC and another + * one for the IO-APIC. + */ + if (!smp_found_config && detect_init_APIC()) { + apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); + apic_phys = __pa(apic_phys); + } else + apic_phys = mp_lapic_addr; + + set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", + APIC_BASE, apic_phys); + + /* Put local APIC into the resource map. */ + lapic_resource.start = apic_phys; + lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1; + insert_resource(&iomem_resource, &lapic_resource); + + /* + * Fetch the APIC ID of the BSP in case we have a + * default configuration (or the MP table is broken). + */ + boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID)); +} + +/* + * This initializes the IO-APIC and APIC hardware if this is + * a UP kernel. + */ +int __init APIC_init_uniprocessor(void) +{ + if (disable_apic) { + printk(KERN_INFO "Apic disabled\n"); + return -1; + } + if (!cpu_has_apic) { + disable_apic = 1; + printk(KERN_INFO "Apic disabled by BIOS\n"); + return -1; + } + + verify_local_APIC(); + + phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id); + apic_write(APIC_ID, SET_APIC_ID(boot_cpu_id)); + + setup_local_APIC(); + + /* + * Now enable IO-APICs, actually call clear_IO_APIC + * We need clear_IO_APIC before enabling vector on BP + */ + if (!skip_ioapic_setup && nr_ioapics) + enable_IO_APIC(); + + end_local_APIC_setup(); + + if (smp_found_config && !skip_ioapic_setup && nr_ioapics) + setup_IO_APIC(); + else + nr_ioapics = 0; + setup_boot_APIC_clock(); + check_nmi_watchdog(); + return 0; +} + +/* + * Local APIC interrupts + */ + +/* + * This interrupt should _never_ happen with our APIC/SMP architecture + */ +asmlinkage void smp_spurious_interrupt(void) +{ + unsigned int v; + exit_idle(); + irq_enter(); + /* + * Check if this really is a spurious interrupt and ACK it + * if it is a vectored one. Just in case... + * Spurious interrupts should not be ACKed. + */ + v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1)); + if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f))) + ack_APIC_irq(); + + add_pda(irq_spurious_count, 1); + irq_exit(); +} + +/* + * This interrupt should never happen with our APIC/SMP architecture + */ +asmlinkage void smp_error_interrupt(void) +{ + unsigned int v, v1; + + exit_idle(); + irq_enter(); + /* First tickle the hardware, only then report what went on. -- REW */ + v = apic_read(APIC_ESR); + apic_write(APIC_ESR, 0); + v1 = apic_read(APIC_ESR); + ack_APIC_irq(); + atomic_inc(&irq_err_count); + + /* Here is what the APIC error bits mean: + 0: Send CS error + 1: Receive CS error + 2: Send accept error + 3: Receive accept error + 4: Reserved + 5: Send illegal vector + 6: Received illegal vector + 7: Illegal register address + */ + printk(KERN_DEBUG "APIC error on CPU%d: %02x(%02x)\n", + smp_processor_id(), v , v1); + irq_exit(); +} + +void disconnect_bsp_APIC(int virt_wire_setup) +{ + /* Go back to Virtual Wire compatibility mode */ + unsigned long value; + + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write(APIC_SPIV, value); + + if (!virt_wire_setup) { + /* + * For LVT0 make it edge triggered, active high, + * external and enabled + */ + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write(APIC_LVT0, value); + } else { + /* Disable LVT0 */ + apic_write(APIC_LVT0, APIC_LVT_MASKED); + } + + /* For LVT1 make it edge triggered, active high, nmi and enabled */ + value = apic_read(APIC_LVT1); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write(APIC_LVT1, value); +} + +/* + * Power management + */ #ifdef CONFIG_PM static struct { @@ -571,7 +1063,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) if (!apic_pm_state.active) return 0; - maxlvt = get_maxlvt(); + maxlvt = lapic_get_maxlvt(); apic_pm_state.apic_id = apic_read(APIC_ID); apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); @@ -605,7 +1097,7 @@ static int lapic_resume(struct sys_device *dev) if (!apic_pm_state.active) return 0; - maxlvt = get_maxlvt(); + maxlvt = lapic_get_maxlvt(); local_irq_save(flags); rdmsr(MSR_IA32_APICBASE, l, h); @@ -639,14 +1131,14 @@ static int lapic_resume(struct sys_device *dev) } static struct sysdev_class lapic_sysclass = { - set_kset_name("lapic"), + .name = "lapic", .resume = lapic_resume, .suspend = lapic_suspend, }; static struct sys_device device_lapic = { - .id = 0, - .cls = &lapic_sysclass, + .id = 0, + .cls = &lapic_sysclass, }; static void __cpuinit apic_pm_activate(void) @@ -657,9 +1149,11 @@ static void __cpuinit apic_pm_activate(void) static int __init init_lapic_sysfs(void) { int error; + if (!cpu_has_apic) return 0; /* XXX: remove suspend/resume procs if !apic_pm_state.active? */ + error = sysdev_class_register(&lapic_sysclass); if (!error) error = sysdev_register(&device_lapic); @@ -673,423 +1167,6 @@ static void apic_pm_activate(void) { } #endif /* CONFIG_PM */ -static int __init apic_set_verbosity(char *str) -{ - if (str == NULL) { - skip_ioapic_setup = 0; - ioapic_force = 1; - return 0; - } - if (strcmp("debug", str) == 0) - apic_verbosity = APIC_DEBUG; - else if (strcmp("verbose", str) == 0) - apic_verbosity = APIC_VERBOSE; - else { - printk(KERN_WARNING "APIC Verbosity level %s not recognised" - " use apic=verbose or apic=debug\n", str); - return -EINVAL; - } - - return 0; -} -early_param("apic", apic_set_verbosity); - -/* - * Detect and enable local APICs on non-SMP boards. - * Original code written by Keir Fraser. - * On AMD64 we trust the BIOS - if it says no APIC it is likely - * not correctly set up (usually the APIC timer won't work etc.) - */ - -static int __init detect_init_APIC (void) -{ - if (!cpu_has_apic) { - printk(KERN_INFO "No local APIC present\n"); - return -1; - } - - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - boot_cpu_id = 0; - return 0; -} - -#ifdef CONFIG_X86_IO_APIC -static struct resource * __init ioapic_setup_resources(void) -{ -#define IOAPIC_RESOURCE_NAME_SIZE 11 - unsigned long n; - struct resource *res; - char *mem; - int i; - - if (nr_ioapics <= 0) - return NULL; - - n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource); - n *= nr_ioapics; - - mem = alloc_bootmem(n); - res = (void *)mem; - - if (mem != NULL) { - memset(mem, 0, n); - mem += sizeof(struct resource) * nr_ioapics; - - for (i = 0; i < nr_ioapics; i++) { - res[i].name = mem; - res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; - sprintf(mem, "IOAPIC %u", i); - mem += IOAPIC_RESOURCE_NAME_SIZE; - } - } - - ioapic_resources = res; - - return res; -} - -static int __init ioapic_insert_resources(void) -{ - int i; - struct resource *r = ioapic_resources; - - if (!r) { - printk("IO APIC resources could be not be allocated.\n"); - return -1; - } - - for (i = 0; i < nr_ioapics; i++) { - insert_resource(&iomem_resource, r); - r++; - } - - return 0; -} - -/* Insert the IO APIC resources after PCI initialization has occured to handle - * IO APICS that are mapped in on a BAR in PCI space. */ -late_initcall(ioapic_insert_resources); -#endif - -void __init init_apic_mappings(void) -{ - unsigned long apic_phys; - - /* - * If no local APIC can be found then set up a fake all - * zeroes page to simulate the local APIC and another - * one for the IO-APIC. - */ - if (!smp_found_config && detect_init_APIC()) { - apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); - apic_phys = __pa(apic_phys); - } else - apic_phys = mp_lapic_addr; - - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); - apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", - APIC_BASE, apic_phys); - - /* Put local APIC into the resource map. */ - lapic_resource.start = apic_phys; - lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1; - insert_resource(&iomem_resource, &lapic_resource); - - /* - * Fetch the APIC ID of the BSP in case we have a - * default configuration (or the MP table is broken). - */ - boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID)); - - { - unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; - int i; - struct resource *ioapic_res; - - ioapic_res = ioapic_setup_resources(); - for (i = 0; i < nr_ioapics; i++) { - if (smp_found_config) { - ioapic_phys = mp_ioapics[i].mpc_apicaddr; - } else { - ioapic_phys = (unsigned long) - alloc_bootmem_pages(PAGE_SIZE); - ioapic_phys = __pa(ioapic_phys); - } - set_fixmap_nocache(idx, ioapic_phys); - apic_printk(APIC_VERBOSE, - "mapped IOAPIC to %016lx (%016lx)\n", - __fix_to_virt(idx), ioapic_phys); - idx++; - - if (ioapic_res != NULL) { - ioapic_res->start = ioapic_phys; - ioapic_res->end = ioapic_phys + (4 * 1024) - 1; - ioapic_res++; - } - } - } -} - -/* - * This function sets up the local APIC timer, with a timeout of - * 'clocks' APIC bus clock. During calibration we actually call - * this function twice on the boot CPU, once with a bogus timeout - * value, second time for real. The other (noncalibrating) CPUs - * call this function only once, with the real, calibrated value. - * - * We do reads before writes even if unnecessary, to get around the - * P5 APIC double write bug. - */ - -static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) -{ - unsigned int lvtt_value, tmp_value; - - lvtt_value = LOCAL_TIMER_VECTOR; - if (!oneshot) - lvtt_value |= APIC_LVT_TIMER_PERIODIC; - if (!irqen) - lvtt_value |= APIC_LVT_MASKED; - - apic_write(APIC_LVTT, lvtt_value); - - /* - * Divide PICLK by 16 - */ - tmp_value = apic_read(APIC_TDCR); - apic_write(APIC_TDCR, (tmp_value - & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) - | APIC_TDR_DIV_16); - - if (!oneshot) - apic_write(APIC_TMICT, clocks); -} - -static void setup_APIC_timer(void) -{ - struct clock_event_device *levt = &__get_cpu_var(lapic_events); - - memcpy(levt, &lapic_clockevent, sizeof(*levt)); - levt->cpumask = cpumask_of_cpu(smp_processor_id()); - - clockevents_register_device(levt); -} - -/* - * In this function we calibrate APIC bus clocks to the external - * timer. Unfortunately we cannot use jiffies and the timer irq - * to calibrate, since some later bootup code depends on getting - * the first irq? Ugh. - * - * We want to do the calibration only once since we - * want to have local timer irqs syncron. CPUs connected - * by the same APIC bus have the very same bus frequency. - * And we want to have irqs off anyways, no accidental - * APIC irq that way. - */ - -#define TICK_COUNT 100000000 - -static void __init calibrate_APIC_clock(void) -{ - unsigned apic, apic_start; - unsigned long tsc, tsc_start; - int result; - - local_irq_disable(); - - /* - * Put whatever arbitrary (but long enough) timeout - * value into the APIC clock, we just want to get the - * counter running for calibration. - * - * No interrupt enable ! - */ - __setup_APIC_LVTT(250000000, 0, 0); - - apic_start = apic_read(APIC_TMCCT); -#ifdef CONFIG_X86_PM_TIMER - if (apic_calibrate_pmtmr && pmtmr_ioport) { - pmtimer_wait(5000); /* 5ms wait */ - apic = apic_read(APIC_TMCCT); - result = (apic_start - apic) * 1000L / 5; - } else -#endif - { - rdtscll(tsc_start); - - do { - apic = apic_read(APIC_TMCCT); - rdtscll(tsc); - } while ((tsc - tsc_start) < TICK_COUNT && - (apic_start - apic) < TICK_COUNT); - - result = (apic_start - apic) * 1000L * tsc_khz / - (tsc - tsc_start); - } - - local_irq_enable(); - - printk(KERN_DEBUG "APIC timer calibration result %d\n", result); - - printk(KERN_INFO "Detected %d.%03d MHz APIC timer.\n", - result / 1000 / 1000, result / 1000 % 1000); - - /* Calculate the scaled math multiplication factor */ - lapic_clockevent.mult = div_sc(result, NSEC_PER_SEC, 32); - lapic_clockevent.max_delta_ns = - clockevent_delta2ns(0x7FFFFF, &lapic_clockevent); - lapic_clockevent.min_delta_ns = - clockevent_delta2ns(0xF, &lapic_clockevent); - - calibration_result = result / HZ; -} - -void __init setup_boot_APIC_clock (void) -{ - /* - * The local apic timer can be disabled via the kernel commandline. - * Register the lapic timer as a dummy clock event source on SMP - * systems, so the broadcast mechanism is used. On UP systems simply - * ignore it. - */ - if (disable_apic_timer) { - printk(KERN_INFO "Disabling APIC timer\n"); - /* No broadcast on UP ! */ - if (num_possible_cpus() > 1) - setup_APIC_timer(); - return; - } - - printk(KERN_INFO "Using local APIC timer interrupts.\n"); - calibrate_APIC_clock(); - - /* - * If nmi_watchdog is set to IO_APIC, we need the - * PIT/HPET going. Otherwise register lapic as a dummy - * device. - */ - if (nmi_watchdog != NMI_IO_APIC) - lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; - else - printk(KERN_WARNING "APIC timer registered as dummy," - " due to nmi_watchdog=1!\n"); - - setup_APIC_timer(); -} - -/* - * AMD C1E enabled CPUs have a real nasty problem: Some BIOSes set the - * C1E flag only in the secondary CPU, so when we detect the wreckage - * we already have enabled the boot CPU local apic timer. Check, if - * disable_apic_timer is set and the DUMMY flag is cleared. If yes, - * set the DUMMY flag again and force the broadcast mode in the - * clockevents layer. - */ -void __cpuinit check_boot_apic_timer_broadcast(void) -{ - if (!disable_apic_timer || - (lapic_clockevent.features & CLOCK_EVT_FEAT_DUMMY)) - return; - - printk(KERN_INFO "AMD C1E detected late. Force timer broadcast.\n"); - lapic_clockevent.features |= CLOCK_EVT_FEAT_DUMMY; - - local_irq_enable(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, &boot_cpu_id); - local_irq_disable(); -} - -void __cpuinit setup_secondary_APIC_clock(void) -{ - check_boot_apic_timer_broadcast(); - setup_APIC_timer(); -} - -int setup_profiling_timer(unsigned int multiplier) -{ - return -EINVAL; -} - -void setup_APIC_extended_lvt(unsigned char lvt_off, unsigned char vector, - unsigned char msg_type, unsigned char mask) -{ - unsigned long reg = (lvt_off << 4) + K8_APIC_EXT_LVT_BASE; - unsigned int v = (mask << 16) | (msg_type << 8) | vector; - apic_write(reg, v); -} - -/* - * Local timer interrupt handler. It does both profiling and - * process statistics/rescheduling. - * - * We do profiling in every local tick, statistics/rescheduling - * happen only every 'profiling multiplier' ticks. The default - * multiplier is 1 and it can be changed by writing the new multiplier - * value into /proc/profile. - */ - -void smp_local_timer_interrupt(void) -{ - int cpu = smp_processor_id(); - struct clock_event_device *evt = &per_cpu(lapic_events, cpu); - - /* - * Normally we should not be here till LAPIC has been initialized but - * in some cases like kdump, its possible that there is a pending LAPIC - * timer interrupt from previous kernel's context and is delivered in - * new kernel the moment interrupts are enabled. - * - * Interrupts are enabled early and LAPIC is setup much later, hence - * its possible that when we get here evt->event_handler is NULL. - * Check for event_handler being NULL and discard the interrupt as - * spurious. - */ - if (!evt->event_handler) { - printk(KERN_WARNING - "Spurious LAPIC timer interrupt on cpu %d\n", cpu); - /* Switch it off */ - lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt); - return; - } - - /* - * the NMI deadlock-detector uses this. - */ - add_pda(apic_timer_irqs, 1); - - evt->event_handler(evt); -} - -/* - * Local APIC timer interrupt. This is the most natural way for doing - * local interrupts, but local timer interrupts can be emulated by - * broadcast interrupts too. [in case the hw doesn't support APIC timers] - * - * [ if a single-CPU system runs an SMP kernel then we call the local - * interrupt as well. Thus we cannot inline the local irq ... ] - */ -void smp_apic_timer_interrupt(struct pt_regs *regs) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - - /* - * NOTE! We'd better ACK the irq immediately, - * because timer handling can be slow. - */ - ack_APIC_irq(); - /* - * update_process_times() expects us to have done irq_enter(). - * Besides, if we don't timer interrupts ignore the global - * interrupt lock, which is the WrongThing (tm) to do. - */ - exit_idle(); - irq_enter(); - smp_local_timer_interrupt(); - irq_exit(); - set_irq_regs(old_regs); -} - /* * apic_is_clustered_box() -- Check if we can expect good TSC * @@ -1103,21 +1180,34 @@ __cpuinit int apic_is_clustered_box(void) { int i, clusters, zeros; unsigned id; + u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr; DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS); bitmap_zero(clustermap, NUM_APIC_CLUSTERS); for (i = 0; i < NR_CPUS; i++) { - id = bios_cpu_apicid[i]; + /* are we being called early in kernel startup? */ + if (bios_cpu_apicid) { + id = bios_cpu_apicid[i]; + } + else if (i < nr_cpu_ids) { + if (cpu_present(i)) + id = per_cpu(x86_bios_cpu_apicid, i); + else + continue; + } + else + break; + if (id != BAD_APICID) __set_bit(APIC_CLUSTERID(id), clustermap); } /* Problem: Partially populated chassis may not have CPUs in some of * the APIC clusters they have been allocated. Only present CPUs have - * bios_cpu_apicid entries, thus causing zeroes in the bitmap. Since - * clusters are allocated sequentially, count zeros only if they are - * bounded by ones. + * x86_bios_cpu_apicid entries, thus causing zeroes in the bitmap. + * Since clusters are allocated sequentially, count zeros only if + * they are bounded by ones. */ clusters = 0; zeros = 0; @@ -1138,96 +1228,33 @@ __cpuinit int apic_is_clustered_box(void) } /* - * This interrupt should _never_ happen with our APIC/SMP architecture - */ -asmlinkage void smp_spurious_interrupt(void) -{ - unsigned int v; - exit_idle(); - irq_enter(); - /* - * Check if this really is a spurious interrupt and ACK it - * if it is a vectored one. Just in case... - * Spurious interrupts should not be ACKed. - */ - v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1)); - if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f))) - ack_APIC_irq(); - - add_pda(irq_spurious_count, 1); - irq_exit(); -} - -/* - * This interrupt should never happen with our APIC/SMP architecture + * APIC command line parameters */ - -asmlinkage void smp_error_interrupt(void) -{ - unsigned int v, v1; - - exit_idle(); - irq_enter(); - /* First tickle the hardware, only then report what went on. -- REW */ - v = apic_read(APIC_ESR); - apic_write(APIC_ESR, 0); - v1 = apic_read(APIC_ESR); - ack_APIC_irq(); - atomic_inc(&irq_err_count); - - /* Here is what the APIC error bits mean: - 0: Send CS error - 1: Receive CS error - 2: Send accept error - 3: Receive accept error - 4: Reserved - 5: Send illegal vector - 6: Received illegal vector - 7: Illegal register address - */ - printk (KERN_DEBUG "APIC error on CPU%d: %02x(%02x)\n", - smp_processor_id(), v , v1); - irq_exit(); -} - -int disable_apic; - -/* - * This initializes the IO-APIC and APIC hardware if this is - * a UP kernel. - */ -int __init APIC_init_uniprocessor (void) +static int __init apic_set_verbosity(char *str) { - if (disable_apic) { - printk(KERN_INFO "Apic disabled\n"); - return -1; + if (str == NULL) { + skip_ioapic_setup = 0; + ioapic_force = 1; + return 0; } - if (!cpu_has_apic) { - disable_apic = 1; - printk(KERN_INFO "Apic disabled by BIOS\n"); - return -1; + if (strcmp("debug", str) == 0) + apic_verbosity = APIC_DEBUG; + else if (strcmp("verbose", str) == 0) + apic_verbosity = APIC_VERBOSE; + else { + printk(KERN_WARNING "APIC Verbosity level %s not recognised" + " use apic=verbose or apic=debug\n", str); + return -EINVAL; } - verify_local_APIC(); - - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id); - apic_write(APIC_ID, SET_APIC_ID(boot_cpu_id)); - - setup_local_APIC(); - - if (smp_found_config && !skip_ioapic_setup && nr_ioapics) - setup_IO_APIC(); - else - nr_ioapics = 0; - setup_boot_APIC_clock(); - check_nmi_watchdog(); return 0; } +early_param("apic", apic_set_verbosity); static __init int setup_disableapic(char *str) { disable_apic = 1; - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); + clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); return 0; } early_param("disableapic", setup_disableapic); |
