diff options
Diffstat (limited to 'arch/sh/boards')
| -rw-r--r-- | arch/sh/boards/Kconfig | 16 | ||||
| -rw-r--r-- | arch/sh/boards/Makefile | 2 | ||||
| -rw-r--r-- | arch/sh/boards/board-sh2007.c | 133 | ||||
| -rw-r--r-- | arch/sh/boards/board-sh7757lcr.c | 374 | ||||
| -rw-r--r-- | arch/sh/boards/mach-ap325rxa/setup.c | 4 | ||||
| -rw-r--r-- | arch/sh/boards/mach-kfr2r09/Makefile | 6 | ||||
| -rw-r--r-- | arch/sh/boards/mach-kfr2r09/lcd_wqvga.c | 2 |
7 files changed, 532 insertions, 5 deletions
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 07b35ca2f644..90ed1ec6921d 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -165,6 +165,11 @@ config SH_HIGHLANDER select SYS_SUPPORTS_PCI select IO_TRAPPED if MMU +config SH_SH7757LCR + bool "SH7757LCR" + depends on CPU_SUBTYPE_SH7757 + select ARCH_REQUIRE_GPIOLIB + config SH_SH7785LCR bool "SH7785LCR" depends on CPU_SUBTYPE_SH7785 @@ -309,6 +314,17 @@ config SH_POLARIS help Select if configuring for an SMSC Polaris development board +config SH_SH2007 + bool "SH-2007 board" + select NO_IOPORT + depends on CPU_SUBTYPE_SH7780 + help + SH-2007 is a single-board computer based around SH7780 chip + intended for embedded applications. + It has an Ethernet interface (SMC9118), direct connected + Compact Flash socket, two serial ports and PC-104 bus. + More information at <http://sh2000.sh-linux.org>. + endmenu source "arch/sh/boards/mach-r2d/Kconfig" diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile index 4f90f9b7a922..38ef655cc0f0 100644 --- a/arch/sh/boards/Makefile +++ b/arch/sh/boards/Makefile @@ -2,6 +2,7 @@ # Specific board support, not covered by a mach group. # obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o +obj-$(CONFIG_SH_SH2007) += board-sh2007.o obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o obj-$(CONFIG_SH_URQUELL) += board-urquell.o obj-$(CONFIG_SH_SHMIN) += board-shmin.o @@ -9,3 +10,4 @@ obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o obj-$(CONFIG_SH_ESPT) += board-espt.o obj-$(CONFIG_SH_POLARIS) += board-polaris.o obj-$(CONFIG_SH_TITAN) += board-titan.o +obj-$(CONFIG_SH_SH7757LCR) += board-sh7757lcr.o diff --git a/arch/sh/boards/board-sh2007.c b/arch/sh/boards/board-sh2007.c new file mode 100644 index 000000000000..b90b78f6a829 --- /dev/null +++ b/arch/sh/boards/board-sh2007.c @@ -0,0 +1,133 @@ +/* + * SH-2007 board support. + * + * Copyright (C) 2003, 2004 SUGIOKA Toshinobu + * Copyright (C) 2010 Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/smsc911x.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/io.h> +#include <asm/machvec.h> +#include <mach/sh2007.h> + +struct smsc911x_platform_config smc911x_info = { + .flags = SMSC911X_USE_32BIT, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, +}; + +static struct resource smsc9118_0_resources[] = { + [0] = { + .start = SMC0_BASE, + .end = SMC0_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x240), + .end = evt2irq(0x240), + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource smsc9118_1_resources[] = { + [0] = { + .start = SMC1_BASE, + .end = SMC1_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x280), + .end = evt2irq(0x280), + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smsc9118_0_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(smsc9118_0_resources), + .resource = smsc9118_0_resources, + .dev = { + .platform_data = &smc911x_info, + }, +}; + +static struct platform_device smsc9118_1_device = { + .name = "smsc911x", + .id = 1, + .num_resources = ARRAY_SIZE(smsc9118_1_resources), + .resource = smsc9118_1_resources, + .dev = { + .platform_data = &smc911x_info, + }, +}; + +static struct resource cf_resources[] = { + [0] = { + .start = CF_BASE + CF_OFFSET, + .end = CF_BASE + CF_OFFSET + 0x0f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CF_BASE + CF_OFFSET + 0x206, + .end = CF_BASE + CF_OFFSET + 0x20f, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = evt2irq(0x2c0), + .end = evt2irq(0x2c0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cf_device = { + .name = "pata_platform", + .id = 0, + .num_resources = ARRAY_SIZE(cf_resources), + .resource = cf_resources, +}; + +static struct platform_device *sh2007_devices[] __initdata = { + &smsc9118_0_device, + &smsc9118_1_device, + &cf_device, +}; + +static int __init sh2007_io_init(void) +{ + platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices)); + return 0; +} +subsys_initcall(sh2007_io_init); + +static void __init sh2007_init_irq(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ); +} + +/* + * Initialize the board + */ +static void __init sh2007_setup(char **cmdline_p) +{ + printk(KERN_INFO "SH-2007 Setup..."); + + /* setup wait control registers for area 5 */ + __raw_writel(CS5BCR_D, CS5BCR); + __raw_writel(CS5WCR_D, CS5WCR); + __raw_writel(CS5PCR_D, CS5PCR); + + printk(KERN_INFO " done.\n"); +} + +/* + * The Machine Vector + */ +struct sh_machine_vector mv_sh2007 __initmv = { + .mv_setup = sh2007_setup, + .mv_name = "sh2007", + .mv_init_irq = sh2007_init_irq, +}; diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c new file mode 100644 index 000000000000..c475f1056ab4 --- /dev/null +++ b/arch/sh/boards/board-sh7757lcr.c @@ -0,0 +1,374 @@ +/* + * Renesas R0P7757LC0012RL Support. + * + * Copyright (C) 2009 - 2010 Renesas Solutions Corp. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/io.h> +#include <cpu/sh7757.h> +#include <asm/sh_eth.h> +#include <asm/heartbeat.h> + +static struct resource heartbeat_resource = { + .start = 0xffec005c, /* PUDR */ + .end = 0xffec005c, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, +}; + +static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 }; + +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), + .flags = HEARTBEAT_INVERTED, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = 1, + .resource = &heartbeat_resource, +}; + +/* Fast Ethernet */ +static struct resource sh_eth0_resources[] = { + { + .start = 0xfef00000, + .end = 0xfef001ff, + .flags = IORESOURCE_MEM, + }, { + .start = 84, + .end = 84, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_eth_plat_data sh7757_eth0_pdata = { + .phy = 1, + .edmac_endian = EDMAC_LITTLE_ENDIAN, +}; + +static struct platform_device sh7757_eth0_device = { + .name = "sh-eth", + .resource = sh_eth0_resources, + .id = 0, + .num_resources = ARRAY_SIZE(sh_eth0_resources), + .dev = { + .platform_data = &sh7757_eth0_pdata, + }, +}; + +static struct resource sh_eth1_resources[] = { + { + .start = 0xfef00800, + .end = 0xfef009ff, + .flags = IORESOURCE_MEM, + }, { + .start = 84, + .end = 84, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_eth_plat_data sh7757_eth1_pdata = { + .phy = 1, + .edmac_endian = EDMAC_LITTLE_ENDIAN, +}; + +static struct platform_device sh7757_eth1_device = { + .name = "sh-eth", + .resource = sh_eth1_resources, + .id = 1, + .num_resources = ARRAY_SIZE(sh_eth1_resources), + .dev = { + .platform_data = &sh7757_eth1_pdata, + }, +}; + +static struct platform_device *sh7757lcr_devices[] __initdata = { + &heartbeat_device, + &sh7757_eth0_device, + &sh7757_eth1_device, +}; + +static int __init sh7757lcr_devices_setup(void) +{ + /* RGMII (PTA) */ + gpio_request(GPIO_FN_ET0_MDC, NULL); + gpio_request(GPIO_FN_ET0_MDIO, NULL); + gpio_request(GPIO_FN_ET1_MDC, NULL); + gpio_request(GPIO_FN_ET1_MDIO, NULL); + + /* ONFI (PTB, PTZ) */ + gpio_request(GPIO_FN_ON_NRE, NULL); + gpio_request(GPIO_FN_ON_NWE, NULL); + gpio_request(GPIO_FN_ON_NWP, NULL); + gpio_request(GPIO_FN_ON_NCE0, NULL); + gpio_request(GPIO_FN_ON_R_B0, NULL); + gpio_request(GPIO_FN_ON_ALE, NULL); + gpio_request(GPIO_FN_ON_CLE, NULL); + + gpio_request(GPIO_FN_ON_DQ7, NULL); + gpio_request(GPIO_FN_ON_DQ6, NULL); + gpio_request(GPIO_FN_ON_DQ5, NULL); + gpio_request(GPIO_FN_ON_DQ4, NULL); + gpio_request(GPIO_FN_ON_DQ3, NULL); + gpio_request(GPIO_FN_ON_DQ2, NULL); + gpio_request(GPIO_FN_ON_DQ1, NULL); + gpio_request(GPIO_FN_ON_DQ0, NULL); + + /* IRQ8 to 0 (PTB, PTC) */ + gpio_request(GPIO_FN_IRQ8, NULL); + gpio_request(GPIO_FN_IRQ7, NULL); + gpio_request(GPIO_FN_IRQ6, NULL); + gpio_request(GPIO_FN_IRQ5, NULL); + gpio_request(GPIO_FN_IRQ4, NULL); + gpio_request(GPIO_FN_IRQ3, NULL); + gpio_request(GPIO_FN_IRQ2, NULL); + gpio_request(GPIO_FN_IRQ1, NULL); + gpio_request(GPIO_FN_IRQ0, NULL); + + /* SPI0 (PTD) */ + gpio_request(GPIO_FN_SP0_MOSI, NULL); + gpio_request(GPIO_FN_SP0_MISO, NULL); + gpio_request(GPIO_FN_SP0_SCK, NULL); + gpio_request(GPIO_FN_SP0_SCK_FB, NULL); + gpio_request(GPIO_FN_SP0_SS0, NULL); + gpio_request(GPIO_FN_SP0_SS1, NULL); + gpio_request(GPIO_FN_SP0_SS2, NULL); + gpio_request(GPIO_FN_SP0_SS3, NULL); + + /* RMII 0/1 (PTE, PTF) */ + gpio_request(GPIO_FN_RMII0_CRS_DV, NULL); + gpio_request(GPIO_FN_RMII0_TXD1, NULL); + gpio_request(GPIO_FN_RMII0_TXD0, NULL); + gpio_request(GPIO_FN_RMII0_TXEN, NULL); + gpio_request(GPIO_FN_RMII0_REFCLK, NULL); + gpio_request(GPIO_FN_RMII0_RXD1, NULL); + gpio_request(GPIO_FN_RMII0_RXD0, NULL); + gpio_request(GPIO_FN_RMII0_RX_ER, NULL); + gpio_request(GPIO_FN_RMII1_CRS_DV, NULL); + gpio_request(GPIO_FN_RMII1_TXD1, NULL); + gpio_request(GPIO_FN_RMII1_TXD0, NULL); + gpio_request(GPIO_FN_RMII1_TXEN, NULL); + gpio_request(GPIO_FN_RMII1_REFCLK, NULL); + gpio_request(GPIO_FN_RMII1_RXD1, NULL); + gpio_request(GPIO_FN_RMII1_RXD0, NULL); + gpio_request(GPIO_FN_RMII1_RX_ER, NULL); + + /* eMMC (PTG) */ + gpio_request(GPIO_FN_MMCCLK, NULL); + gpio_request(GPIO_FN_MMCCMD, NULL); + gpio_request(GPIO_FN_MMCDAT7, NULL); + gpio_request(GPIO_FN_MMCDAT6, NULL); + gpio_request(GPIO_FN_MMCDAT5, NULL); + gpio_request(GPIO_FN_MMCDAT4, NULL); + gpio_request(GPIO_FN_MMCDAT3, NULL); + gpio_request(GPIO_FN_MMCDAT2, NULL); + gpio_request(GPIO_FN_MMCDAT1, NULL); + gpio_request(GPIO_FN_MMCDAT0, NULL); + + /* LPC (PTG, PTH, PTQ, PTU) */ + gpio_request(GPIO_FN_SERIRQ, NULL); + gpio_request(GPIO_FN_LPCPD, NULL); + gpio_request(GPIO_FN_LDRQ, NULL); + gpio_request(GPIO_FN_WP, NULL); + gpio_request(GPIO_FN_FMS0, NULL); + gpio_request(GPIO_FN_LAD3, NULL); + gpio_request(GPIO_FN_LAD2, NULL); + gpio_request(GPIO_FN_LAD1, NULL); + gpio_request(GPIO_FN_LAD0, NULL); + gpio_request(GPIO_FN_LFRAME, NULL); + gpio_request(GPIO_FN_LRESET, NULL); + gpio_request(GPIO_FN_LCLK, NULL); + gpio_request(GPIO_FN_LGPIO7, NULL); + gpio_request(GPIO_FN_LGPIO6, NULL); + gpio_request(GPIO_FN_LGPIO5, NULL); + gpio_request(GPIO_FN_LGPIO4, NULL); + + /* SPI1 (PTH) */ + gpio_request(GPIO_FN_SP1_MOSI, NULL); + gpio_request(GPIO_FN_SP1_MISO, NULL); + gpio_request(GPIO_FN_SP1_SCK, NULL); + gpio_request(GPIO_FN_SP1_SCK_FB, NULL); + gpio_request(GPIO_FN_SP1_SS0, NULL); + gpio_request(GPIO_FN_SP1_SS1, NULL); + + /* SDHI (PTI) */ + gpio_request(GPIO_FN_SD_WP, NULL); + gpio_request(GPIO_FN_SD_CD, NULL); + gpio_request(GPIO_FN_SD_CLK, NULL); + gpio_request(GPIO_FN_SD_CMD, NULL); + gpio_request(GPIO_FN_SD_D3, NULL); + gpio_request(GPIO_FN_SD_D2, NULL); + gpio_request(GPIO_FN_SD_D1, NULL); + gpio_request(GPIO_FN_SD_D0, NULL); + + /* SCIF3/4 (PTJ, PTW) */ + gpio_request(GPIO_FN_RTS3, NULL); + gpio_request(GPIO_FN_CTS3, NULL); + gpio_request(GPIO_FN_TXD3, NULL); + gpio_request(GPIO_FN_RXD3, NULL); + gpio_request(GPIO_FN_RTS4, NULL); + gpio_request(GPIO_FN_RXD4, NULL); + gpio_request(GPIO_FN_TXD4, NULL); + gpio_request(GPIO_FN_CTS4, NULL); + + /* SERMUX (PTK, PTL, PTO, PTV) */ + gpio_request(GPIO_FN_COM2_TXD, NULL); + gpio_request(GPIO_FN_COM2_RXD, NULL); + gpio_request(GPIO_FN_COM2_RTS, NULL); + gpio_request(GPIO_FN_COM2_CTS, NULL); + gpio_request(GPIO_FN_COM2_DTR, NULL); + gpio_request(GPIO_FN_COM2_DSR, NULL); + gpio_request(GPIO_FN_COM2_DCD, NULL); + gpio_request(GPIO_FN_COM2_RI, NULL); + gpio_request(GPIO_FN_RAC_RXD, NULL); + gpio_request(GPIO_FN_RAC_RTS, NULL); + gpio_request(GPIO_FN_RAC_CTS, NULL); + gpio_request(GPIO_FN_RAC_DTR, NULL); + gpio_request(GPIO_FN_RAC_DSR, NULL); + gpio_request(GPIO_FN_RAC_DCD, NULL); + gpio_request(GPIO_FN_RAC_TXD, NULL); + gpio_request(GPIO_FN_COM1_TXD, NULL); + gpio_request(GPIO_FN_COM1_RXD, NULL); + gpio_request(GPIO_FN_COM1_RTS, NULL); + gpio_request(GPIO_FN_COM1_CTS, NULL); + + writeb(0x10, 0xfe470000); /* SMR0: SerMux mode 0 */ + + /* IIC (PTM, PTR, PTS) */ + gpio_request(GPIO_FN_SDA7, NULL); + gpio_request(GPIO_FN_SCL7, NULL); + gpio_request(GPIO_FN_SDA6, NULL); + gpio_request(GPIO_FN_SCL6, NULL); + gpio_request(GPIO_FN_SDA5, NULL); + gpio_request(GPIO_FN_SCL5, NULL); + gpio_request(GPIO_FN_SDA4, NULL); + gpio_request(GPIO_FN_SCL4, NULL); + gpio_request(GPIO_FN_SDA3, NULL); + gpio_request(GPIO_FN_SCL3, NULL); + gpio_request(GPIO_FN_SDA2, NULL); + gpio_request(GPIO_FN_SCL2, NULL); + gpio_request(GPIO_FN_SDA1, NULL); + gpio_request(GPIO_FN_SCL1, NULL); + gpio_request(GPIO_FN_SDA0, NULL); + gpio_request(GPIO_FN_SCL0, NULL); + + /* USB (PTN) */ + gpio_request(GPIO_FN_VBUS_EN, NULL); + gpio_request(GPIO_FN_VBUS_OC, NULL); + + /* SGPIO1/0 (PTN, PTO) */ + gpio_request(GPIO_FN_SGPIO1_CLK, NULL); + gpio_request(GPIO_FN_SGPIO1_LOAD, NULL); + gpio_request(GPIO_FN_SGPIO1_DI, NULL); + gpio_request(GPIO_FN_SGPIO1_DO, NULL); + gpio_request(GPIO_FN_SGPIO0_CLK, NULL); + gpio_request(GPIO_FN_SGPIO0_LOAD, NULL); + gpio_request(GPIO_FN_SGPIO0_DI, NULL); + gpio_request(GPIO_FN_SGPIO0_DO, NULL); + + /* WDT (PTN) */ + gpio_request(GPIO_FN_SUB_CLKIN, NULL); + + /* System (PTT) */ + gpio_request(GPIO_FN_STATUS1, NULL); + gpio_request(GPIO_FN_STATUS0, NULL); + + /* PWMX (PTT) */ + gpio_request(GPIO_FN_PWMX1, NULL); + gpio_request(GPIO_FN_PWMX0, NULL); + + /* R-SPI (PTV) */ + gpio_request(GPIO_FN_R_SPI_MOSI, NULL); + gpio_request(GPIO_FN_R_SPI_MISO, NULL); + gpio_request(GPIO_FN_R_SPI_RSPCK, NULL); + gpio_request(GPIO_FN_R_SPI_SSL0, NULL); + gpio_request(GPIO_FN_R_SPI_SSL1, NULL); + + /* EVC (PTV, PTW) */ + gpio_request(GPIO_FN_EVENT7, NULL); + gpio_request(GPIO_FN_EVENT6, NULL); + gpio_request(GPIO_FN_EVENT5, NULL); + gpio_request(GPIO_FN_EVENT4, NULL); + gpio_request(GPIO_FN_EVENT3, NULL); + gpio_request(GPIO_FN_EVENT2, NULL); + gpio_request(GPIO_FN_EVENT1, NULL); + gpio_request(GPIO_FN_EVENT0, NULL); + + /* LED for heartbeat */ + gpio_request(GPIO_PTU3, NULL); + gpio_direction_output(GPIO_PTU3, 1); + gpio_request(GPIO_PTU2, NULL); + gpio_direction_output(GPIO_PTU2, 1); + gpio_request(GPIO_PTU1, NULL); + gpio_direction_output(GPIO_PTU1, 1); + gpio_request(GPIO_PTU0, NULL); + gpio_direction_output(GPIO_PTU0, 1); + + /* control for MDIO of Gigabit Ethernet */ + gpio_request(GPIO_PTT4, NULL); + gpio_direction_output(GPIO_PTT4, 1); + + /* control for eMMC */ + gpio_request(GPIO_PTT7, NULL); /* eMMC_RST# */ + gpio_direction_output(GPIO_PTT7, 0); + gpio_request(GPIO_PTT6, NULL); /* eMMC_INDEX# */ + gpio_direction_output(GPIO_PTT6, 0); + gpio_request(GPIO_PTT5, NULL); /* eMMC_PRST# */ + gpio_direction_output(GPIO_PTT5, 1); + + /* General platform */ + return platform_add_devices(sh7757lcr_devices, + ARRAY_SIZE(sh7757lcr_devices)); +} +arch_initcall(sh7757lcr_devices_setup); + +/* Initialize IRQ setting */ +void __init init_sh7757lcr_IRQ(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ7654); + plat_irq_setup_pins(IRQ_MODE_IRQ3210); +} + +/* Initialize the board */ +static void __init sh7757lcr_setup(char **cmdline_p) +{ + printk(KERN_INFO "Renesas R0P7757LC0012RL support.\n"); +} + +static int sh7757lcr_mode_pins(void) +{ + int value = 0; + + /* These are the factory default settings of S3 (Low active). + * If you change these dip switches then you will need to + * adjust the values below as well. + */ + value |= MODE_PIN0; /* Clock Mode: 1 */ + + return value; +} + +/* The Machine Vector */ +static struct sh_machine_vector mv_sh7757lcr __initmv = { + .mv_name = "SH7757LCR", + .mv_setup = sh7757lcr_setup, + .mv_init_irq = init_sh7757lcr_IRQ, + .mv_mode_pins = sh7757lcr_mode_pins, +}; + diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 3a170bd3f3d0..3da116f47f01 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -154,7 +154,7 @@ static struct platform_device nand_flash_device = { #define PORT_DRVCRA 0xA405018A #define PORT_DRVCRB 0xA405018C -static void ap320_wvga_power_on(void *board_data) +static void ap320_wvga_power_on(void *board_data, struct fb_info *info) { msleep(100); @@ -316,7 +316,7 @@ static struct soc_camera_platform_info camera_info = { .format_name = "UYVY", .format_depth = 16, .format = { - .code = V4L2_MBUS_FMT_YUYV8_2X8_BE, + .code = V4L2_MBUS_FMT_UYVY8_2X8, .colorspace = V4L2_COLORSPACE_SMPTE170M, .field = V4L2_FIELD_NONE, .width = 640, diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile index 4e577a3bf658..60dd63f4a427 100644 --- a/arch/sh/boards/mach-kfr2r09/Makefile +++ b/arch/sh/boards/mach-kfr2r09/Makefile @@ -1,2 +1,4 @@ -obj-y := setup.o sdram.o -obj-$(CONFIG_FB_SH_MOBILE_LCDC) += lcd_wqvga.o +obj-y := setup.o sdram.o +ifneq ($(CONFIG_FB_SH_MOBILE_LCDC),) +obj-y += lcd_wqvga.o +endif diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c index e9b970846c41..25e145fb7087 100644 --- a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c +++ b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c @@ -327,7 +327,7 @@ static int kfr2r09_lcd_backlight(int on) return 0; } -void kfr2r09_lcd_on(void *board_data) +void kfr2r09_lcd_on(void *board_data, struct fb_info *info) { kfr2r09_lcd_backlight(1); } |
