summaryrefslogtreecommitdiffstats
path: root/arch/sh/boards/mach-se/7724/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/mach-se/7724/setup.c')
-rw-r--r--arch/sh/boards/mach-se/7724/setup.c114
1 files changed, 60 insertions, 54 deletions
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 858ecb25d469..66cdbc3c7af9 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -53,26 +53,17 @@
*/
/* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
- .regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
+static struct resource heartbeat_resource = {
+ .start = PA_LED,
+ .end = PA_LED,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
/* LAN91C111 */
@@ -265,12 +256,12 @@ static struct platform_device ceu1_device = {
#define FCLKACR 0xa4150008
static void fsimck_init(struct clk *clk)
{
- u32 status = ctrl_inl(clk->enable_reg);
+ u32 status = __raw_readl(clk->enable_reg);
/* use external clock */
status &= ~0x000000ff;
status |= 0x00000080;
- ctrl_outl(status, clk->enable_reg);
+ __raw_writel(status, clk->enable_reg);
}
static struct clk_ops fsimck_clk_ops = {
@@ -322,7 +313,7 @@ static struct platform_device fsi_device = {
/* KEYSC in SoC (Needs SW33-2 set to ON) */
static struct sh_keysc_info keysc_info = {
.mode = SH_KEYSC_MODE_1,
- .scan_timing = 10,
+ .scan_timing = 3,
.delay = 50,
.keycodes = {
KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
@@ -460,7 +451,7 @@ static struct resource sdhi0_cn7_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 101,
+ .start = 100,
.flags = IORESOURCE_IRQ,
},
};
@@ -483,7 +474,7 @@ static struct resource sdhi1_cn8_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 24,
+ .start = 23,
.flags = IORESOURCE_IRQ,
},
};
@@ -498,6 +489,26 @@ static struct platform_device sdhi1_cn8_device = {
},
};
+/* IrDA */
+static struct resource irda_resources[] = {
+ [0] = {
+ .name = "IrDA",
+ .start = 0xA45D0000,
+ .end = 0xA45D0049,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 20,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device irda_device = {
+ .name = "sh_sir",
+ .num_resources = ARRAY_SIZE(irda_resources),
+ .resource = irda_resources,
+};
+
static struct platform_device *ms7724se_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
@@ -512,6 +523,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
&fsi_device,
&sdhi0_cn7_device,
&sdhi1_cn8_device,
+ &irda_device,
};
/* I2C device */
@@ -531,7 +543,7 @@ static int __init sh_eth_is_eeprom_ready(void)
int t = 10000;
while (t--) {
- if (!ctrl_inw(EEPROM_STAT))
+ if (!__raw_readw(EEPROM_STAT))
return 1;
udelay(1);
}
@@ -551,13 +563,13 @@ static void __init sh_eth_init(void)
/* read MAC addr from EEPROM */
for (i = 0 ; i < 3 ; i++) {
- ctrl_outw(0x0, EEPROM_OP); /* read */
- ctrl_outw(i*2, EEPROM_ADR);
- ctrl_outw(0x1, EEPROM_STRT);
+ __raw_writew(0x0, EEPROM_OP); /* read */
+ __raw_writew(i*2, EEPROM_ADR);
+ __raw_writew(0x1, EEPROM_STRT);
if (!sh_eth_is_eeprom_ready())
return;
- mac = ctrl_inw(EEPROM_DATA);
+ mac = __raw_readw(EEPROM_DATA);
sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
}
@@ -594,28 +606,29 @@ arch_initcall(arch_setup);
static int __init devices_setup(void)
{
- u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
- struct clk *fsia_clk;
+ u16 sw = __raw_readw(SW4140); /* select camera, monitor */
+ struct clk *clk;
/* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+ SUSP_SH_RSTANDBY,
&ms7724se_sdram_enter_start,
&ms7724se_sdram_enter_end,
&ms7724se_sdram_leave_start,
&ms7724se_sdram_leave_end);
/* Reset Release */
- ctrl_outw(ctrl_inw(FPGA_OUT) &
+ __raw_writew(__raw_readw(FPGA_OUT) &
~((1 << 1) | /* LAN */
(1 << 6) | /* VIDEO DAC */
(1 << 7) | /* AK4643 */
+ (1 << 8) | /* IrDA */
(1 << 12) | /* USB0 */
(1 << 14)), /* RMII */
FPGA_OUT);
/* turn on USB clocks, use external clock */
- ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+ __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
-#ifdef CONFIG_PM
/* Let LED9 show STATUS2 */
gpio_request(GPIO_FN_STATUS2, NULL);
@@ -624,28 +637,12 @@ static int __init devices_setup(void)
/* Lit LED11 show PDSTATUS */
gpio_request(GPIO_FN_PDSTATUS, NULL);
-#else
- /* Lit LED9 */
- gpio_request(GPIO_PTJ6, NULL);
- gpio_direction_output(GPIO_PTJ6, 1);
- gpio_export(GPIO_PTJ6, 0);
-
- /* Lit LED10 */
- gpio_request(GPIO_PTJ5, NULL);
- gpio_direction_output(GPIO_PTJ5, 1);
- gpio_export(GPIO_PTJ5, 0);
-
- /* Lit LED11 */
- gpio_request(GPIO_PTJ7, NULL);
- gpio_direction_output(GPIO_PTJ7, 1);
- gpio_export(GPIO_PTJ7, 0);
-#endif
/* enable USB0 port */
- ctrl_outw(0x0600, 0xa40501d4);
+ __raw_writew(0x0600, 0xa40501d4);
/* enable USB1 port */
- ctrl_outw(0x0600, 0xa4050192);
+ __raw_writew(0x0600, 0xa4050192);
/* enable IRQ 0,1,2 */
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
@@ -693,7 +690,7 @@ static int __init devices_setup(void)
gpio_request(GPIO_FN_LCDVCPWC, NULL);
gpio_request(GPIO_FN_LCDRD, NULL);
gpio_request(GPIO_FN_LCDLCLK, NULL);
- ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+ __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
/* enable CEU0 */
gpio_request(GPIO_FN_VIO0_D15, NULL);
@@ -764,13 +761,18 @@ static int __init devices_setup(void)
gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
gpio_request(GPIO_FN_FSIIASD, NULL);
+ /* set SPU2 clock to 83.4 MHz */
+ clk = clk_get(NULL, "spu_clk");
+ clk_set_rate(clk, clk_round_rate(clk, 83333333));
+ clk_put(clk);
+
/* change parent of FSI A */
- fsia_clk = clk_get(NULL, "fsia_clk");
+ clk = clk_get(NULL, "fsia_clk");
clk_register(&fsimcka_clk);
- clk_set_parent(fsia_clk, &fsimcka_clk);
- clk_set_rate(fsia_clk, 11000);
+ clk_set_parent(clk, &fsimcka_clk);
+ clk_set_rate(clk, 11000);
clk_set_rate(&fsimcka_clk, 11000);
- clk_put(fsia_clk);
+ clk_put(clk);
/* SDHI0 connected to cn7 */
gpio_request(GPIO_FN_SDHI0CD, NULL);
@@ -792,6 +794,10 @@ static int __init devices_setup(void)
gpio_request(GPIO_FN_SDHI1CMD, NULL);
gpio_request(GPIO_FN_SDHI1CLK, NULL);
+ /* enable IrDA */
+ gpio_request(GPIO_FN_IRDA_OUT, NULL);
+ gpio_request(GPIO_FN_IRDA_IN, NULL);
+
/*
* enable SH-Eth
*
OpenPOWER on IntegriCloud