summaryrefslogtreecommitdiffstats
path: root/arch/ppc/syslib/cpm2_common.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/syslib/cpm2_common.c')
-rw-r--r--arch/ppc/syslib/cpm2_common.c196
1 files changed, 0 insertions, 196 deletions
diff --git a/arch/ppc/syslib/cpm2_common.c b/arch/ppc/syslib/cpm2_common.c
deleted file mode 100644
index 6cd859d7721f..000000000000
--- a/arch/ppc/syslib/cpm2_common.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * General Purpose functions for the global management of the
- * 8260 Communication Processor Module.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
- * 2.3.99 Updates
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space. The allocator for that is here. When the communication
- * process is reset, we reclaim the memory available. There is
- * currently no deallocator for this memory.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mpc8260.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/cpm2.h>
-#include <asm/rheap.h>
-
-static void cpm2_dpinit(void);
-cpm_cpm2_t *cpmp; /* Pointer to comm processor space */
-
-/* We allocate this here because it is used almost exclusively for
- * the communication processor devices.
- */
-cpm2_map_t *cpm2_immr;
-
-#define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount
- of space for CPM as it is larger
- than on PQ2 */
-
-void
-cpm2_reset(void)
-{
- cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
-
- /* Reclaim the DP memory for our use.
- */
- cpm2_dpinit();
-
- /* Tell everyone where the comm processor resides.
- */
- cpmp = &cpm2_immr->im_cpm;
-}
-
-/* Set a baud rate generator. This needs lots of work. There are
- * eight BRGs, which can be connected to the CPM channels or output
- * as clocks. The BRGs are in two different block of internal
- * memory mapped space.
- * The baud rate clock is the system clock divided by something.
- * It was set up long ago during the initial boot phase and is
- * is given to us.
- * Baud rate clocks are zero-based in the driver code (as that maps
- * to port numbers). Documentation uses 1-based numbering.
- */
-#define BRG_INT_CLK (((bd_t *)__res)->bi_brgfreq)
-#define BRG_UART_CLK (BRG_INT_CLK/16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-cpm_setbrg(uint brg, uint rate)
-{
- volatile uint *bp;
-
- /* This is good enough to get SMCs running.....
- */
- if (brg < 4) {
- bp = (uint *)&cpm2_immr->im_brgc1;
- }
- else {
- bp = (uint *)&cpm2_immr->im_brgc5;
- brg -= 4;
- }
- bp += brg;
- *bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN;
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-cpm2_fastbrg(uint brg, uint rate, int div16)
-{
- volatile uint *bp;
-
- if (brg < 4) {
- bp = (uint *)&cpm2_immr->im_brgc1;
- }
- else {
- bp = (uint *)&cpm2_immr->im_brgc5;
- brg -= 4;
- }
- bp += brg;
- *bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
- if (div16)
- *bp |= CPM_BRG_DIV16;
-}
-
-/*
- * dpalloc / dpfree bits.
- */
-static spinlock_t cpm_dpmem_lock;
-/* 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up... */
-static rh_block_t cpm_boot_dpmem_rh_block[16];
-static rh_info_t cpm_dpmem_info;
-
-static void cpm2_dpinit(void)
-{
- spin_lock_init(&cpm_dpmem_lock);
-
- /* initialize the info header */
- rh_init(&cpm_dpmem_info, 1,
- sizeof(cpm_boot_dpmem_rh_block) /
- sizeof(cpm_boot_dpmem_rh_block[0]),
- cpm_boot_dpmem_rh_block);
-
- /* Attach the usable dpmem area */
- /* XXX: This is actually crap. CPM_DATAONLY_BASE and
- * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
- * varies with the processor and the microcode patches activated.
- * But the following should be at least safe.
- */
- rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
-}
-
-/* This function returns an index into the DPRAM area.
- */
-unsigned long cpm_dpalloc(uint size, uint align)
-{
- unsigned long start;
- unsigned long flags;
-
- spin_lock_irqsave(&cpm_dpmem_lock, flags);
- cpm_dpmem_info.alignment = align;
- start = rh_alloc(&cpm_dpmem_info, size, "commproc");
- spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
- return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc);
-
-int cpm_dpfree(unsigned long offset)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&cpm_dpmem_lock, flags);
- ret = rh_free(&cpm_dpmem_info, offset);
- spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(cpm_dpfree);
-
-/* not sure if this is ever needed */
-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
-{
- unsigned long start;
- unsigned long flags;
-
- spin_lock_irqsave(&cpm_dpmem_lock, flags);
- cpm_dpmem_info.alignment = align;
- start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
- spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
- return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc_fixed);
-
-void cpm_dpdump(void)
-{
- rh_dump(&cpm_dpmem_info);
-}
-EXPORT_SYMBOL(cpm_dpdump);
-
-void *cpm_dpram_addr(unsigned long offset)
-{
- return (void *)&cpm2_immr->im_dprambase[offset];
-}
-EXPORT_SYMBOL(cpm_dpram_addr);
OpenPOWER on IntegriCloud