diff options
Diffstat (limited to 'arch/ppc/platforms/mcpn765.c')
| -rw-r--r-- | arch/ppc/platforms/mcpn765.c | 527 |
1 files changed, 0 insertions, 527 deletions
diff --git a/arch/ppc/platforms/mcpn765.c b/arch/ppc/platforms/mcpn765.c deleted file mode 100644 index e88d294ea593..000000000000 --- a/arch/ppc/platforms/mcpn765.c +++ /dev/null @@ -1,527 +0,0 @@ -/* - * arch/ppc/platforms/mcpn765.c - * - * Board setup routines for the Motorola MCG MCPN765 cPCI Board. - * - * Author: Mark A. Greer - * mgreer@mvista.com - * - * Modified by Randy Vinson (rvinson@mvista.com) - * - * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* - * This file adds support for the Motorola MCG MCPN765. - */ -#include <linux/config.h> -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/initrd.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/serial.h> -#include <linux/tty.h> /* for linux/serial_core.h */ -#include <linux/serial_core.h> -#include <linux/slab.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/time.h> -#include <asm/dma.h> -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/prom.h> -#include <asm/smp.h> -#include <asm/open_pic.h> -#include <asm/i8259.h> -#include <asm/todc.h> -#include <asm/pci-bridge.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/bootinfo.h> -#include <asm/hawk.h> -#include <asm/kgdb.h> - -#include "mcpn765.h" - -static u_char mcpn765_openpic_initsenses[] __initdata = { - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE),/* 16: i8259 cascade */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 17: COM1,2,3,4 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 18: Enet 1 (front) */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 19: HAWK WDT XXXX */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 20: 21554 bridge */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 21: cPCI INTA# */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 22: cPCI INTB# */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 23: cPCI INTC# */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 24: cPCI INTD# */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 25: PMC1 INTA#,PMC2 INTB#*/ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 26: PMC1 INTB#,PMC2 INTC#*/ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 27: PMC1 INTC#,PMC2 INTD#*/ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 28: PMC1 INTD#,PMC2 INTA#*/ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 29: Enet 2 (J3) */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 30: Abort Switch */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 31: RTC Alarm */ -}; - -extern void mcpn765_set_VIA_IDE_native(void); - -extern u_int openpic_irq(void); -extern char cmd_line[]; - -extern void gen550_progress(char *, unsigned short); -extern void gen550_init(int, struct uart_port *); - -int use_of_interrupt_tree = 0; - -static void mcpn765_halt(void); - -TODC_ALLOC(); - -/* - * Motorola MCG MCPN765 interrupt routing. - */ -static inline int -mcpn765_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - { 14, 0, 0, 0 }, /* IDSEL 11 - have to manually set */ - { 0, 0, 0, 0 }, /* IDSEL 12 - unused */ - { 0, 0, 0, 0 }, /* IDSEL 13 - unused */ - { 18, 0, 0, 0 }, /* IDSEL 14 - Enet 0 */ - { 0, 0, 0, 0 }, /* IDSEL 15 - unused */ - { 25, 26, 27, 28 }, /* IDSEL 16 - PMC Slot 1 */ - { 28, 25, 26, 27 }, /* IDSEL 17 - PMC Slot 2 */ - { 0, 0, 0, 0 }, /* IDSEL 18 - PMC 2B Connector XXXX */ - { 29, 0, 0, 0 }, /* IDSEL 19 - Enet 1 */ - { 20, 0, 0, 0 }, /* IDSEL 20 - 21554 cPCI bridge */ - }; - - const long min_idsel = 11, max_idsel = 20, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -void __init -mcpn765_set_VIA_IDE_legacy(void) -{ - unsigned short vend, dev; - - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend); - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev); - - if ((vend == PCI_VENDOR_ID_VIA) && - (dev == PCI_DEVICE_ID_VIA_82C586_1)) { - - unsigned char temp; - - /* put back original "standard" port base addresses */ - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_0, 0x1f1); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_1, 0x3f5); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_2, 0x171); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_3, 0x375); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_4, 0xcc01); - - /* put into legacy mode */ - early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - &temp); - temp &= ~0x05; - early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - temp); - } -} - -void -mcpn765_set_VIA_IDE_native(void) -{ - unsigned short vend, dev; - - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend); - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev); - - if ((vend == PCI_VENDOR_ID_VIA) && - (dev == PCI_DEVICE_ID_VIA_82C586_1)) { - - unsigned char temp; - - /* put into native mode */ - early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - &temp); - temp |= 0x05; - early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - temp); - } -} - -/* - * Initialize the VIA 82c586b. - */ -static void __init -mcpn765_setup_via_82c586b(void) -{ - struct pci_dev *dev; - u_char c; - - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_0, - NULL)) == NULL) { - printk("No VIA ISA bridge found\n"); - mcpn765_halt(); - /* NOTREACHED */ - } - - /* - * If the firmware left the EISA 4d0/4d1 ports enabled, make sure - * IRQ 14 is set for edge. - */ - pci_read_config_byte(dev, 0x47, &c); - - if (c & (1<<5)) { - c = inb(0x4d1); - c &= ~(1<<6); - outb(c, 0x4d1); - } - - /* Disable PNP IRQ routing since we use the Hawk's MPIC */ - pci_write_config_dword(dev, 0x54, 0); - pci_write_config_byte(dev, 0x58, 0); - - pci_dev_put(dev); - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_1, - NULL)) == NULL) { - printk("No VIA ISA bridge found\n"); - mcpn765_halt(); - /* NOTREACHED */ - } - - /* - * PPCBug doesn't set the enable bits for the IDE device. - * Turn them on now. - */ - pci_read_config_byte(dev, 0x40, &c); - c |= 0x03; - pci_write_config_byte(dev, 0x40, c); - pci_dev_put(dev); - - return; -} - -void __init -mcpn765_pcibios_fixup(void) -{ - /* Do MCPN765 board specific initialization. */ - mcpn765_setup_via_82c586b(); -} - -void __init -mcpn765_find_bridges(void) -{ - struct pci_controller *hose; - - hose = pcibios_alloc_controller(); - - if (!hose) - return; - - hose->first_busno = 0; - hose->last_busno = 0xff; - hose->pci_mem_offset = MCPN765_PCI_PHY_MEM_OFFSET; - - pci_init_resource(&hose->io_resource, - MCPN765_PCI_IO_START, - MCPN765_PCI_IO_END, - IORESOURCE_IO, - "PCI host bridge"); - - pci_init_resource(&hose->mem_resources[0], - MCPN765_PCI_MEM_START, - MCPN765_PCI_MEM_END, - IORESOURCE_MEM, - "PCI host bridge"); - - hose->io_space.start = MCPN765_PCI_IO_START; - hose->io_space.end = MCPN765_PCI_IO_END; - hose->mem_space.start = MCPN765_PCI_MEM_START; - hose->mem_space.end = MCPN765_PCI_MEM_END - HAWK_MPIC_SIZE; - - if (hawk_init(hose, - MCPN765_HAWK_PPC_REG_BASE, - MCPN765_PROC_PCI_MEM_START, - MCPN765_PROC_PCI_MEM_END - HAWK_MPIC_SIZE, - MCPN765_PROC_PCI_IO_START, - MCPN765_PROC_PCI_IO_END, - MCPN765_PCI_MEM_END - HAWK_MPIC_SIZE + 1) != 0) { - printk("Could not initialize HAWK bridge\n"); - } - - /* VIA IDE BAR decoders are only 16-bits wide. PCI Auto Config - * will reassign the bars outside of 16-bit I/O space, which will - * "break" things. To prevent this, we'll set the IDE chip into - * legacy mode and seed the bars with their legacy addresses (in 16-bit - * I/O space). The Auto Config code will skip the IDE contoller in - * legacy mode, so our bar values will stick. - */ - mcpn765_set_VIA_IDE_legacy(); - - hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); - - /* Now that we've got 16-bit addresses in the bars, we can switch the - * IDE controller back into native mode so we can do "modern" resource - * and interrupt management. - */ - mcpn765_set_VIA_IDE_native(); - - ppc_md.pcibios_fixup = mcpn765_pcibios_fixup; - ppc_md.pcibios_fixup_bus = NULL; - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mcpn765_map_irq; - - return; -} -static void __init -mcpn765_setup_arch(void) -{ - struct pci_controller *hose; - - if ( ppc_md.progress ) - ppc_md.progress("mcpn765_setup_arch: enter", 0); - - loops_per_jiffy = 50000000 / HZ; - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_SDA2; -#endif - - if ( ppc_md.progress ) - ppc_md.progress("mcpn765_setup_arch: find_bridges", 0); - - /* Lookup PCI host bridges */ - mcpn765_find_bridges(); - - hose = pci_bus_to_hose(0); - isa_io_base = (ulong)hose->io_base_virt; - - TODC_INIT(TODC_TYPE_MK48T37, - (MCPN765_PHYS_NVRAM_AS0 - isa_io_base), - (MCPN765_PHYS_NVRAM_AS1 - isa_io_base), - (MCPN765_PHYS_NVRAM_DATA - isa_io_base), - 8); - - OpenPIC_InitSenses = mcpn765_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof(mcpn765_openpic_initsenses); - - printk("Motorola MCG MCPN765 cPCI Non-System Board\n"); - printk("MCPN765 port (MontaVista Software, Inc. (source@mvista.com))\n"); - - if ( ppc_md.progress ) - ppc_md.progress("mcpn765_setup_arch: exit", 0); - - return; -} - -static void __init -mcpn765_init2(void) -{ - - request_region(0x00,0x20,"dma1"); - request_region(0x20,0x20,"pic1"); - request_region(0x40,0x20,"timer"); - request_region(0x80,0x10,"dma page reg"); - request_region(0xa0,0x20,"pic2"); - request_region(0xc0,0x20,"dma2"); - - return; -} - -/* - * Interrupt setup and service. - * Have MPIC on HAWK and cascaded 8259s on VIA 82586 cascaded to MPIC. - */ -static void __init -mcpn765_init_IRQ(void) -{ - int i; - - if ( ppc_md.progress ) - ppc_md.progress("init_irq: enter", 0); - - openpic_init(NUM_8259_INTERRUPTS); - openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade", - i8259_irq); - - for(i=0; i < NUM_8259_INTERRUPTS; i++) - irq_desc[i].handler = &i8259_pic; - - i8259_init(0); - - if ( ppc_md.progress ) - ppc_md.progress("init_irq: exit", 0); - - return; -} - -static u32 -mcpn765_irq_canonicalize(u32 irq) -{ - if (irq == 2) - return 9; - else - return irq; -} - -static unsigned long __init -mcpn765_find_end_of_memory(void) -{ - return hawk_get_mem_size(MCPN765_HAWK_SMC_BASE); -} - -static void __init -mcpn765_map_io(void) -{ - io_block_mapping(0xfe800000, 0xfe800000, 0x00800000, _PAGE_IO); -} - -static void -mcpn765_reset_board(void) -{ - local_irq_disable(); - - /* set VIA IDE controller into native mode */ - mcpn765_set_VIA_IDE_native(); - - /* Set exception prefix high - to the firmware */ - _nmask_and_or_msr(0, MSR_IP); - - out_8((u_char *)MCPN765_BOARD_MODRST_REG, 0x01); - - return; -} - -static void -mcpn765_restart(char *cmd) -{ - volatile ulong i = 10000000; - - mcpn765_reset_board(); - - while (i-- > 0); - panic("restart failed\n"); -} - -static void -mcpn765_power_off(void) -{ - mcpn765_halt(); - /* NOTREACHED */ -} - -static void -mcpn765_halt(void) -{ - local_irq_disable(); - while (1); - /* NOTREACHED */ -} - -static int -mcpn765_show_cpuinfo(struct seq_file *m) -{ - seq_printf(m, "vendor\t\t: Motorola MCG\n"); - seq_printf(m, "machine\t\t: MCPN765\n"); - - return 0; -} - -/* - * Set BAT 3 to map 0xf0000000 to end of physical memory space. - */ -static __inline__ void -mcpn765_set_bat(void) -{ - mb(); - mtspr(SPRN_DBAT1U, 0xfe8000fe); - mtspr(SPRN_DBAT1L, 0xfe80002a); - mb(); -} - -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - parse_bootinfo(find_bootinfo()); - - /* Map in board regs, etc. */ - mcpn765_set_bat(); - - isa_mem_base = MCPN765_ISA_MEM_BASE; - pci_dram_offset = MCPN765_PCI_DRAM_OFFSET; - ISA_DMA_THRESHOLD = 0x00ffffff; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - - ppc_md.setup_arch = mcpn765_setup_arch; - ppc_md.show_cpuinfo = mcpn765_show_cpuinfo; - ppc_md.irq_canonicalize = mcpn765_irq_canonicalize; - ppc_md.init_IRQ = mcpn765_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - ppc_md.init = mcpn765_init2; - - ppc_md.restart = mcpn765_restart; - ppc_md.power_off = mcpn765_power_off; - ppc_md.halt = mcpn765_halt; - - ppc_md.find_end_of_memory = mcpn765_find_end_of_memory; - ppc_md.setup_io_mappings = mcpn765_map_io; - - ppc_md.time_init = todc_time_init; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.get_rtc_time = todc_get_rtc_time; - ppc_md.calibrate_decr = todc_calibrate_decr; - - ppc_md.nvram_read_val = todc_m48txx_read_val; - ppc_md.nvram_write_val = todc_m48txx_write_val; - - ppc_md.heartbeat = NULL; - ppc_md.heartbeat_reset = 0; - ppc_md.heartbeat_count = 0; - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - ppc_md.progress = gen550_progress; -#endif -#ifdef CONFIG_KGDB - ppc_md.kgdb_map_scc = gen550_kgdb_map_scc; -#endif - - return; -} |
