summaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/ev64260.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/ev64260.c')
-rw-r--r--arch/ppc/platforms/ev64260.c649
1 files changed, 0 insertions, 649 deletions
diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c
deleted file mode 100644
index f522b31c46d7..000000000000
--- a/arch/ppc/platforms/ev64260.c
+++ /dev/null
@@ -1,649 +0,0 @@
-/*
- * Board setup routines for the Marvell/Galileo EV-64260-BP Evaluation Board.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001-2003 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * The EV-64260-BP port is the result of hard work from many people from
- * many companies. In particular, employees of Marvell/Galileo, Mission
- * Critical Linux, Xyterra, and MontaVista Software were heavily involved.
- *
- * Note: I have not been able to get *all* PCI slots to work reliably
- * at 66 MHz. I recommend setting jumpers J15 & J16 to short pins 1&2
- * so that 33 MHz is used. --MAG
- * Note: The 750CXe and 7450 are not stable with a 125MHz or 133MHz TCLK/SYSCLK.
- * At 100MHz, they are solid.
- */
-
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/platform_device.h>
-#if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#else
-#include <linux/mv643xx.h>
-#endif
-#include <asm/bootinfo.h>
-#include <asm/machdep.h>
-#include <asm/mv64x60.h>
-#include <asm/todc.h>
-#include <asm/time.h>
-
-#include <platforms/ev64260.h>
-
-#define BOARD_VENDOR "Marvell/Galileo"
-#define BOARD_MACHINE "EV-64260-BP"
-
-static struct mv64x60_handle bh;
-
-#if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-#endif
-
-static const unsigned int cpu_7xx[16] = { /* 7xx & 74xx (but not 745x) */
- 18, 15, 14, 2, 4, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0
-};
-static const unsigned int cpu_745x[2][16] = { /* PLL_EXT 0 & 1 */
- { 1, 15, 14, 2, 4, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0 },
- { 0, 30, 0, 2, 0, 26, 0, 18, 0, 22, 20, 24, 28, 32, 0, 0 }
-};
-
-
-TODC_ALLOC();
-
-static int
-ev64260_get_bus_speed(void)
-{
- return 100000000;
-}
-
-static int
-ev64260_get_cpu_speed(void)
-{
- unsigned long pvr, hid1, pll_ext;
-
- pvr = PVR_VER(mfspr(SPRN_PVR));
-
- if (pvr != PVR_VER(PVR_7450)) {
- hid1 = mfspr(SPRN_HID1) >> 28;
- return ev64260_get_bus_speed() * cpu_7xx[hid1]/2;
- }
- else {
- hid1 = (mfspr(SPRN_HID1) & 0x0001e000) >> 13;
- pll_ext = 0; /* No way to read; must get from schematic */
- return ev64260_get_bus_speed() * cpu_745x[pll_ext][hid1]/2;
- }
-}
-
-unsigned long __init
-ev64260_find_end_of_memory(void)
-{
- return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
- MV64x60_TYPE_GT64260A);
-}
-
-/*
- * Marvell/Galileo EV-64260-BP Evaluation Board PCI interrupt routing.
- * Note: By playing with J8 and JP1-4, you can get 2 IRQ's from the first
- * PCI bus (in which cast, INTPIN B would be EV64260_PCI_1_IRQ).
- * This is the most IRQs you can get from one bus with this board, though.
- */
-static int __init
-ev64260_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
- if (hose->index == 0) {
- static char pci_irq_table[][4] =
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- {EV64260_PCI_0_IRQ,0,0,0}, /* IDSEL 7 - PCI bus 0 */
- {EV64260_PCI_0_IRQ,0,0,0}, /* IDSEL 8 - PCI bus 0 */
- };
-
- const long min_idsel = 7, max_idsel = 8, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
- }
- else {
- static char pci_irq_table[][4] =
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- { EV64260_PCI_1_IRQ,0,0,0}, /* IDSEL 7 - PCI bus 1 */
- { EV64260_PCI_1_IRQ,0,0,0}, /* IDSEL 8 - PCI bus 1 */
- };
-
- const long min_idsel = 7, max_idsel = 8, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
- }
-}
-
-static void __init
-ev64260_setup_peripherals(void)
-{
- mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
- EV64260_EMB_FLASH_BASE, EV64260_EMB_FLASH_SIZE, 0);
- bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
- mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
- EV64260_EXT_SRAM_BASE, EV64260_EXT_SRAM_SIZE, 0);
- bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
- mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
- EV64260_TODC_BASE, EV64260_TODC_SIZE, 0);
- bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
- mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
- EV64260_UART_BASE, EV64260_UART_SIZE, 0);
- bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
- mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
- EV64260_EXT_FLASH_BASE, EV64260_EXT_FLASH_SIZE, 0);
- bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-
- TODC_INIT(TODC_TYPE_DS1501, 0, 0,
- ioremap(EV64260_TODC_BASE, EV64260_TODC_SIZE), 8);
-
- mv64x60_clr_bits(&bh, MV64x60_CPU_CONFIG,((1<<12) | (1<<28) | (1<<29)));
- mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1<<27));
-
- if (ev64260_get_bus_speed() > 100000000)
- mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1<<23));
-
- mv64x60_set_bits(&bh, MV64x60_PCI0_PCI_DECODE_CNTL, ((1<<0) | (1<<3)));
- mv64x60_set_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, ((1<<0) | (1<<3)));
-
- /*
- * Enabling of PCI internal-vs-external arbitration
- * is a platform- and errata-dependent decision.
- */
- if (bh.type == MV64x60_TYPE_GT64260A ) {
- mv64x60_set_bits(&bh, MV64x60_PCI0_ARBITER_CNTL, (1<<31));
- mv64x60_set_bits(&bh, MV64x60_PCI1_ARBITER_CNTL, (1<<31));
- }
-
- mv64x60_set_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1<<9)); /* Only 1 cpu */
-
- /*
- * Turn off timer/counters. Not turning off watchdog timer because
- * can't read its reg on the 64260A so don't know if we'll be enabling
- * or disabling.
- */
- mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
- ((1<<0) | (1<<8) | (1<<16) | (1<<24)));
- mv64x60_clr_bits(&bh, GT64260_TIMR_CNTR_4_7_CNTL,
- ((1<<0) | (1<<8) | (1<<16) | (1<<24)));
-
- /*
- * Set MPSC Multiplex RMII
- * NOTE: ethernet driver modifies bit 0 and 1
- */
- mv64x60_write(&bh, GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
-
- /*
- * The EV-64260-BP uses several Multi-Purpose Pins (MPP) on the 64260
- * bridge as interrupt inputs (via the General Purpose Ports (GPP)
- * register). Need to route the MPP inputs to the GPP and set the
- * polarity correctly.
- *
- * In MPP Control 2 Register
- * MPP 21 -> GPP 21 (DUART channel A intr) bits 20-23 -> 0
- * MPP 22 -> GPP 22 (DUART channel B intr) bits 24-27 -> 0
- */
- mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_2, (0xf<<20) | (0xf<<24) );
-
- /*
- * In MPP Control 3 Register
- * MPP 26 -> GPP 26 (RTC INT) bits 8-11 -> 0
- * MPP 27 -> GPP 27 (PCI 0 INTA) bits 12-15 -> 0
- * MPP 29 -> GPP 29 (PCI 1 INTA) bits 20-23 -> 0
- */
- mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_3, (0xf<<8)|(0xf<<12)|(0xf<<20));
-
-#define GPP_EXTERNAL_INTERRUPTS \
- ((1<<21) | (1<<22) | (1<<26) | (1<<27) | (1<<29))
- /* DUART & PCI interrupts are inputs */
- mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, GPP_EXTERNAL_INTERRUPTS);
- /* DUART & PCI interrupts are active low */
- mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, GPP_EXTERNAL_INTERRUPTS);
-
- /* Clear any pending interrupts for these inputs and enable them. */
- mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~GPP_EXTERNAL_INTERRUPTS);
- mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, GPP_EXTERNAL_INTERRUPTS);
-
- return;
-}
-
-static void __init
-ev64260_setup_bridge(void)
-{
- struct mv64x60_setup_info si;
- int i;
-
- memset(&si, 0, sizeof(si));
-
- si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
- si.pci_0.enable_bus = 1;
- si.pci_0.pci_io.cpu_base = EV64260_PCI0_IO_CPU_BASE;
- si.pci_0.pci_io.pci_base_hi = 0;
- si.pci_0.pci_io.pci_base_lo = EV64260_PCI0_IO_PCI_BASE;
- si.pci_0.pci_io.size = EV64260_PCI0_IO_SIZE;
- si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
- si.pci_0.pci_mem[0].cpu_base = EV64260_PCI0_MEM_CPU_BASE;
- si.pci_0.pci_mem[0].pci_base_hi = 0;
- si.pci_0.pci_mem[0].pci_base_lo = EV64260_PCI0_MEM_PCI_BASE;
- si.pci_0.pci_mem[0].size = EV64260_PCI0_MEM_SIZE;
- si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
- si.pci_0.pci_cmd_bits = 0;
- si.pci_0.latency_timer = 0x8;
-
- si.pci_1.enable_bus = 1;
- si.pci_1.pci_io.cpu_base = EV64260_PCI1_IO_CPU_BASE;
- si.pci_1.pci_io.pci_base_hi = 0;
- si.pci_1.pci_io.pci_base_lo = EV64260_PCI1_IO_PCI_BASE;
- si.pci_1.pci_io.size = EV64260_PCI1_IO_SIZE;
- si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
- si.pci_1.pci_mem[0].cpu_base = EV64260_PCI1_MEM_CPU_BASE;
- si.pci_1.pci_mem[0].pci_base_hi = 0;
- si.pci_1.pci_mem[0].pci_base_lo = EV64260_PCI1_MEM_PCI_BASE;
- si.pci_1.pci_mem[0].size = EV64260_PCI1_MEM_SIZE;
- si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
- si.pci_1.pci_cmd_bits = 0;
- si.pci_1.latency_timer = 0x8;
-
- for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
- si.cpu_prot_options[i] = 0;
- si.cpu_snoop_options[i] = GT64260_CPU_SNOOP_WB;
- si.pci_0.acc_cntl_options[i] =
- GT64260_PCI_ACC_CNTL_DREADEN |
- GT64260_PCI_ACC_CNTL_RDPREFETCH |
- GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
- GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
- GT64260_PCI_ACC_CNTL_SWAP_NONE |
- GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
- si.pci_0.snoop_options[i] = GT64260_PCI_SNOOP_WB;
- si.pci_1.acc_cntl_options[i] =
- GT64260_PCI_ACC_CNTL_DREADEN |
- GT64260_PCI_ACC_CNTL_RDPREFETCH |
- GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
- GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
- GT64260_PCI_ACC_CNTL_SWAP_NONE |
- GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
- si.pci_1.snoop_options[i] = GT64260_PCI_SNOOP_WB;
- }
-
- /* Lookup PCI host bridges */
- if (mv64x60_init(&bh, &si))
- printk(KERN_ERR "Bridge initialization failed.\n");
-
- pci_dram_offset = 0; /* System mem at same addr on PCI & cpu bus */
- ppc_md.pci_swizzle = common_swizzle;
- ppc_md.pci_map_irq = ev64260_map_irq;
- ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
- mv64x60_set_bus(&bh, 0, 0);
- bh.hose_a->first_busno = 0;
- bh.hose_a->last_busno = 0xff;
- bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-
- bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
- mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
- bh.hose_b->last_busno = 0xff;
- bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
- bh.hose_b->first_busno);
-
- return;
-}
-
-#if defined(CONFIG_SERIAL_8250) && !defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init
-ev64260_early_serial_map(void)
-{
- struct uart_port port;
- static char first_time = 1;
-
- if (first_time) {
- memset(&port, 0, sizeof(port));
-
- port.membase = ioremap(EV64260_SERIAL_0, EV64260_UART_SIZE);
- port.irq = EV64260_UART_0_IRQ;
- port.uartclk = BASE_BAUD * 16;
- port.regshift = 2;
- port.iotype = UPIO_MEM;
- port.flags = STD_COM_FLAGS;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
- gen550_init(0, &port);
-#endif
-
- if (early_serial_setup(&port) != 0)
- printk(KERN_WARNING "Early serial init of port 0 "
- "failed\n");
-
- first_time = 0;
- }
-
- return;
-}
-#elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init
-ev64260_early_serial_map(void)
-{
-}
-#endif
-
-static void __init
-ev64260_setup_arch(void)
-{
- if (ppc_md.progress)
- ppc_md.progress("ev64260_setup_arch: enter", 0);
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_SDA2;
-#endif
-
- if (ppc_md.progress)
- ppc_md.progress("ev64260_setup_arch: Enabling L2 cache", 0);
-
- /* Enable L2 and L3 caches (if 745x) */
- _set_L2CR(_get_L2CR() | L2CR_L2E);
- _set_L3CR(_get_L3CR() | L3CR_L3E);
-
- if (ppc_md.progress)
- ppc_md.progress("ev64260_setup_arch: Initializing bridge", 0);
-
- ev64260_setup_bridge(); /* set up PCI bridge(s) */
- ev64260_setup_peripherals(); /* set up chip selects/GPP/MPP etc */
-
- if (ppc_md.progress)
- ppc_md.progress("ev64260_setup_arch: bridge init complete", 0);
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_MPSC_CONSOLE)
- ev64260_early_serial_map();
-#endif
-
- printk(KERN_INFO "%s %s port (C) 2001 MontaVista Software, Inc. "
- "(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE);
-
- if (ppc_md.progress)
- ppc_md.progress("ev64260_setup_arch: exit", 0);
-
- return;
-}
-
-/* Platform device data fixup routines. */
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init
-ev64260_fixup_mpsc_pdata(struct platform_device *pdev)
-{
- struct mpsc_pdata *pdata;
-
- pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-
- pdata->max_idle = 40;
- pdata->default_baud = EV64260_DEFAULT_BAUD;
- pdata->brg_clk_src = EV64260_MPSC_CLK_SRC;
- pdata->brg_clk_freq = EV64260_MPSC_CLK_FREQ;
-
- return;
-}
-
-static int
-ev64260_platform_notify(struct device *dev)
-{
- static struct {
- char *bus_id;
- void ((*rtn)(struct platform_device *pdev));
- } dev_map[] = {
- { MPSC_CTLR_NAME ".0", ev64260_fixup_mpsc_pdata },
- { MPSC_CTLR_NAME ".1", ev64260_fixup_mpsc_pdata },
- };
- struct platform_device *pdev;
- int i;
-
- if (dev && dev->bus_id)
- for (i=0; i<ARRAY_SIZE(dev_map); i++)
- if (!strncmp(dev->bus_id, dev_map[i].bus_id,
- BUS_ID_SIZE)) {
-
- pdev = container_of(dev,
- struct platform_device, dev);
- dev_map[i].rtn(pdev);
- }
-
- return 0;
-}
-#endif
-
-static void
-ev64260_reset_board(void *addr)
-{
- local_irq_disable();
-
- /* disable and invalidate the L2 cache */
- _set_L2CR(0);
- _set_L2CR(0x200000);
-
- /* flush and disable L1 I/D cache */
- __asm__ __volatile__
- ("mfspr 3,1008\n\t"
- "ori 5,5,0xcc00\n\t"
- "ori 4,3,0xc00\n\t"
- "andc 5,3,5\n\t"
- "sync\n\t"
- "mtspr 1008,4\n\t"
- "isync\n\t"
- "sync\n\t"
- "mtspr 1008,5\n\t"
- "isync\n\t"
- "sync\n\t");
-
- /* unmap any other random cs's that might overlap with bootcs */
- mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, 0, 0, 0);
- bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
- mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, 0, 0, 0);
- bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
- mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN, 0, 0, 0);
- bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
- mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN, 0, 0, 0);
- bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-
- /* map bootrom back in to gt @ reset defaults */
- mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
- 0xff800000, 8*1024*1024, 0);
- bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
- /* move reg base back to default, setup default pci0 */
- mv64x60_write(&bh, MV64x60_INTERNAL_SPACE_DECODE,
- (1<<24) | CONFIG_MV64X60_BASE >> 20);
-
- /* NOTE: FROM NOW ON no more GT_REGS accesses.. 0x1 is not mapped
- * via BAT or MMU, and MSR IR/DR is ON */
- /* SRR0 has system reset vector, SRR1 has default MSR value */
- /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
- /* NOTE: assumes reset vector is at 0xfff00100 */
- __asm__ __volatile__
- ("mtspr 26, %0\n\t"
- "li 4,(1<<6)\n\t"
- "mtspr 27,4\n\t"
- "rfi\n\t"
- :: "r" (addr):"r4");
-
- return;
-}
-
-static void
-ev64260_restart(char *cmd)
-{
- volatile ulong i = 10000000;
-
- ev64260_reset_board((void *)0xfff00100);
-
- while (i-- > 0);
- panic("restart failed\n");
-}
-
-static void
-ev64260_halt(void)
-{
- local_irq_disable();
- while (1);
- /* NOTREACHED */
-}
-
-static void
-ev64260_power_off(void)
-{
- ev64260_halt();
- /* NOTREACHED */
-}
-
-static int
-ev64260_show_cpuinfo(struct seq_file *m)
-{
- uint pvid;
-
- pvid = mfspr(SPRN_PVR);
- seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
- seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
- seq_printf(m, "cpu MHz\t\t: %d\n", ev64260_get_cpu_speed()/1000/1000);
- seq_printf(m, "bus MHz\t\t: %d\n", ev64260_get_bus_speed()/1000/1000);
-
- return 0;
-}
-
-/* DS1501 RTC has too much variation to use RTC for calibration */
-static void __init
-ev64260_calibrate_decr(void)
-{
- ulong freq;
-
- freq = ev64260_get_bus_speed()/4;
-
- printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
- freq/1000000, freq%1000000);
-
- tb_ticks_per_jiffy = freq / HZ;
- tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
- return;
-}
-
-/*
- * Set BAT 3 to map 0xfb000000 to 0xfc000000 of physical memory space.
- */
-static __inline__ void
-ev64260_set_bat(void)
-{
- mb();
- mtspr(SPRN_DBAT1U, 0xfb0001fe);
- mtspr(SPRN_DBAT1L, 0xfb00002a);
- mb();
-
- return;
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-static void __init
-ev64260_map_io(void)
-{
- io_block_mapping(0xfb000000, 0xfb000000, 0x01000000, _PAGE_IO);
-}
-#endif
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
- extern int initrd_below_start_ok;
-
- initrd_start=initrd_end=0;
- initrd_below_start_ok=0;
-#endif /* CONFIG_BLK_DEV_INITRD */
-
- parse_bootinfo(find_bootinfo());
-
- isa_mem_base = 0;
- isa_io_base = EV64260_PCI0_IO_CPU_BASE;
- pci_dram_offset = EV64260_PCI0_MEM_CPU_BASE;
-
- loops_per_jiffy = ev64260_get_cpu_speed() / HZ;
-
- ppc_md.setup_arch = ev64260_setup_arch;
- ppc_md.show_cpuinfo = ev64260_show_cpuinfo;
- ppc_md.init_IRQ = gt64260_init_irq;
- ppc_md.get_irq = gt64260_get_irq;
-
- ppc_md.restart = ev64260_restart;
- ppc_md.power_off = ev64260_power_off;
- ppc_md.halt = ev64260_halt;
-
- ppc_md.find_end_of_memory = ev64260_find_end_of_memory;
-
- ppc_md.init = NULL;
-
- ppc_md.time_init = todc_time_init;
- ppc_md.set_rtc_time = todc_set_rtc_time;
- ppc_md.get_rtc_time = todc_get_rtc_time;
- ppc_md.nvram_read_val = todc_direct_read_val;
- ppc_md.nvram_write_val = todc_direct_write_val;
- ppc_md.calibrate_decr = ev64260_calibrate_decr;
-
- bh.p_base = CONFIG_MV64X60_NEW_BASE;
-
- ev64260_set_bat();
-
-#ifdef CONFIG_SERIAL_8250
-#if defined(CONFIG_SERIAL_TEXT_DEBUG)
- ppc_md.setup_io_mappings = ev64260_map_io;
- ppc_md.progress = gen550_progress;
-#endif
-#if defined(CONFIG_KGDB)
- ppc_md.setup_io_mappings = ev64260_map_io;
- ppc_md.early_serial_map = ev64260_early_serial_map;
-#endif
-#elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
- ppc_md.setup_io_mappings = ev64260_map_io;
- ppc_md.progress = mv64x60_mpsc_progress;
- mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef CONFIG_KGDB
- ppc_md.setup_io_mappings = ev64260_map_io;
- ppc_md.early_serial_map = ev64260_early_serial_map;
-#endif /* CONFIG_KGDB */
-
-#endif
-
-#if defined(CONFIG_SERIAL_MPSC)
- platform_notify = ev64260_platform_notify;
-#endif
-
- return;
-}
OpenPOWER on IntegriCloud