diff options
Diffstat (limited to 'arch/powerpc/kernel/eeh_driver.c')
| -rw-r--r-- | arch/powerpc/kernel/eeh_driver.c | 661 |
1 files changed, 661 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c new file mode 100644 index 000000000000..2b1ce17cae50 --- /dev/null +++ b/arch/powerpc/kernel/eeh_driver.c @@ -0,0 +1,661 @@ +/* + * PCI Error Recovery Driver for RPA-compliant PPC64 platform. + * Copyright IBM Corp. 2004 2005 + * Copyright Linas Vepstas <linas@linas.org> 2004, 2005 + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send comments and feedback to Linas Vepstas <linas@austin.ibm.com> + */ +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <asm/eeh.h> +#include <asm/eeh_event.h> +#include <asm/ppc-pci.h> +#include <asm/pci-bridge.h> +#include <asm/prom.h> +#include <asm/rtas.h> + +/** + * eeh_pcid_name - Retrieve name of PCI device driver + * @pdev: PCI device + * + * This routine is used to retrieve the name of PCI device driver + * if that's valid. + */ +static inline const char *eeh_pcid_name(struct pci_dev *pdev) +{ + if (pdev && pdev->dev.driver) + return pdev->dev.driver->name; + return ""; +} + +/** + * eeh_pcid_get - Get the PCI device driver + * @pdev: PCI device + * + * The function is used to retrieve the PCI device driver for + * the indicated PCI device. Besides, we will increase the reference + * of the PCI device driver to prevent that being unloaded on + * the fly. Otherwise, kernel crash would be seen. + */ +static inline struct pci_driver *eeh_pcid_get(struct pci_dev *pdev) +{ + if (!pdev || !pdev->driver) + return NULL; + + if (!try_module_get(pdev->driver->driver.owner)) + return NULL; + + return pdev->driver; +} + +/** + * eeh_pcid_put - Dereference on the PCI device driver + * @pdev: PCI device + * + * The function is called to do dereference on the PCI device + * driver of the indicated PCI device. + */ +static inline void eeh_pcid_put(struct pci_dev *pdev) +{ + if (!pdev || !pdev->driver) + return; + + module_put(pdev->driver->driver.owner); +} + +#if 0 +static void print_device_node_tree(struct pci_dn *pdn, int dent) +{ + int i; + struct device_node *pc; + + if (!pdn) + return; + for (i = 0; i < dent; i++) + printk(" "); + printk("dn=%s mode=%x \tcfg_addr=%x pe_addr=%x \tfull=%s\n", + pdn->node->name, pdn->eeh_mode, pdn->eeh_config_addr, + pdn->eeh_pe_config_addr, pdn->node->full_name); + dent += 3; + pc = pdn->node->child; + while (pc) { + print_device_node_tree(PCI_DN(pc), dent); + pc = pc->sibling; + } +} +#endif + +/** + * eeh_disable_irq - Disable interrupt for the recovering device + * @dev: PCI device + * + * This routine must be called when reporting temporary or permanent + * error to the particular PCI device to disable interrupt of that + * device. If the device has enabled MSI or MSI-X interrupt, we needn't + * do real work because EEH should freeze DMA transfers for those PCI + * devices encountering EEH errors, which includes MSI or MSI-X. + */ +static void eeh_disable_irq(struct pci_dev *dev) +{ + struct eeh_dev *edev = pci_dev_to_eeh_dev(dev); + + /* Don't disable MSI and MSI-X interrupts. They are + * effectively disabled by the DMA Stopped state + * when an EEH error occurs. + */ + if (dev->msi_enabled || dev->msix_enabled) + return; + + if (!irq_has_action(dev->irq)) + return; + + edev->mode |= EEH_DEV_IRQ_DISABLED; + disable_irq_nosync(dev->irq); +} + +/** + * eeh_enable_irq - Enable interrupt for the recovering device + * @dev: PCI device + * + * This routine must be called to enable interrupt while failed + * device could be resumed. + */ +static void eeh_enable_irq(struct pci_dev *dev) +{ + struct eeh_dev *edev = pci_dev_to_eeh_dev(dev); + + if ((edev->mode) & EEH_DEV_IRQ_DISABLED) { + edev->mode &= ~EEH_DEV_IRQ_DISABLED; + enable_irq(dev->irq); + } +} + +/** + * eeh_report_error - Report pci error to each device driver + * @data: eeh device + * @userdata: return value + * + * Report an EEH error to each device driver, collect up and + * merge the device driver responses. Cumulative response + * passed back in "userdata". + */ +static void *eeh_report_error(void *data, void *userdata) +{ + struct eeh_dev *edev = (struct eeh_dev *)data; + struct pci_dev *dev = eeh_dev_to_pci_dev(edev); + enum pci_ers_result rc, *res = userdata; + struct pci_driver *driver; + + /* We might not have the associated PCI device, + * then we should continue for next one. + */ + if (!dev) return NULL; + dev->error_state = pci_channel_io_frozen; + + driver = eeh_pcid_get(dev); + if (!driver) return NULL; + + eeh_disable_irq(dev); + + if (!driver->err_handler || + !driver->err_handler->error_detected) { + eeh_pcid_put(dev); + return NULL; + } + + rc = driver->err_handler->error_detected(dev, pci_channel_io_frozen); + + /* A driver that needs a reset trumps all others */ + if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; + if (*res == PCI_ERS_RESULT_NONE) *res = rc; + + eeh_pcid_put(dev); + return NULL; +} + +/** + * eeh_report_mmio_enabled - Tell drivers that MMIO has been enabled + * @data: eeh device + * @userdata: return value + * + * Tells each device driver that IO ports, MMIO and config space I/O + * are now enabled. Collects up and merges the device driver responses. + * Cumulative response passed back in "userdata". + */ +static void *eeh_report_mmio_enabled(void *data, void *userdata) +{ + struct eeh_dev *edev = (struct eeh_dev *)data; + struct pci_dev *dev = eeh_dev_to_pci_dev(edev); + enum pci_ers_result rc, *res = userdata; + struct pci_driver *driver; + + driver = eeh_pcid_get(dev); + if (!driver) return NULL; + + if (!driver->err_handler || + !driver->err_handler->mmio_enabled) { + eeh_pcid_put(dev); + return NULL; + } + + rc = driver->err_handler->mmio_enabled(dev); + + /* A driver that needs a reset trumps all others */ + if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; + if (*res == PCI_ERS_RESULT_NONE) *res = rc; + + eeh_pcid_put(dev); + return NULL; +} + +/** + * eeh_report_reset - Tell device that slot has been reset + * @data: eeh device + * @userdata: return value + * + * This routine must be called while EEH tries to reset particular + * PCI device so that the associated PCI device driver could take + * some actions, usually to save data the driver needs so that the + * driver can work again while the device is recovered. + */ +static void *eeh_report_reset(void *data, void *userdata) +{ + struct eeh_dev *edev = (struct eeh_dev *)data; + struct pci_dev *dev = eeh_dev_to_pci_dev(edev); + enum pci_ers_result rc, *res = userdata; + struct pci_driver *driver; + + if (!dev) return NULL; + dev->error_state = pci_channel_io_normal; + + driver = eeh_pcid_get(dev); + if (!driver) return NULL; + + eeh_enable_irq(dev); + + if (!driver->err_handler || + !driver->err_handler->slot_reset) { + eeh_pcid_put(dev); + return NULL; + } + + rc = driver->err_handler->slot_reset(dev); + if ((*res == PCI_ERS_RESULT_NONE) || + (*res == PCI_ERS_RESULT_RECOVERED)) *res = rc; + if (*res == PCI_ERS_RESULT_DISCONNECT && + rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; + + eeh_pcid_put(dev); + return NULL; +} + +/** + * eeh_report_resume - Tell device to resume normal operations + * @data: eeh device + * @userdata: return value + * + * This routine must be called to notify the device driver that it + * could resume so that the device driver can do some initialization + * to make the recovered device work again. + */ +static void *eeh_report_resume(void *data, void *userdata) +{ + struct eeh_dev *edev = (struct eeh_dev *)data; + struct pci_dev *dev = eeh_dev_to_pci_dev(edev); + struct pci_driver *driver; + + if (!dev) return NULL; + dev->error_state = pci_channel_io_normal; + + driver = eeh_pcid_get(dev); + if (!driver) return NULL; + + eeh_enable_irq(dev); + + if (!driver->err_handler || + !driver->err_handler->resume) { + eeh_pcid_put(dev); + return NULL; + } + + driver->err_handler->resume(dev); + + eeh_pcid_put(dev); + return NULL; +} + +/** + * eeh_report_failure - Tell device driver that device is dead. + * @data: eeh device + * @userdata: return value + * + * This informs the device driver that the device is permanently + * dead, and that no further recovery attempts will be made on it. + */ +static void *eeh_report_failure(void *data, void *userdata) +{ + struct eeh_dev *edev = (struct eeh_dev *)data; + struct pci_dev *dev = eeh_dev_to_pci_dev(edev); + struct pci_driver *driver; + + if (!dev) return NULL; + dev->error_state = pci_channel_io_perm_failure; + + driver = eeh_pcid_get(dev); + if (!driver) return NULL; + + eeh_disable_irq(dev); + + if (!driver->err_handler || + !driver->err_handler->error_detected) { + eeh_pcid_put(dev); + return NULL; + } + + driver->err_handler->error_detected(dev, pci_channel_io_perm_failure); + + eeh_pcid_put(dev); + return NULL; +} + +/** + * eeh_reset_device - Perform actual reset of a pci slot + * @pe: EEH PE + * @bus: PCI bus corresponding to the isolcated slot + * + * This routine must be called to do reset on the indicated PE. + * During the reset, udev might be invoked because those affected + * PCI devices will be removed and then added. + */ +static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) +{ + struct timeval tstamp; + int cnt, rc; + + /* pcibios will clear the counter; save the value */ + cnt = pe->freeze_count; + tstamp = pe->tstamp; + + /* + * We don't remove the corresponding PE instances because + * we need the information afterwords. The attached EEH + * devices are expected to be attached soon when calling + * into pcibios_add_pci_devices(). + */ + if (bus) + __pcibios_remove_pci_devices(bus, 0); + + /* Reset the pci controller. (Asserts RST#; resets config space). + * Reconfigure bridges and devices. Don't try to bring the system + * up if the reset failed for some reason. + */ + rc = eeh_reset_pe(pe); + if (rc) + return rc; + + /* Restore PE */ + eeh_ops->configure_bridge(pe); + eeh_pe_restore_bars(pe); + + /* Give the system 5 seconds to finish running the user-space + * hotplug shutdown scripts, e.g. ifdown for ethernet. Yes, + * this is a hack, but if we don't do this, and try to bring + * the device up before the scripts have taken it down, + * potentially weird things happen. + */ + if (bus) { + ssleep(5); + pcibios_add_pci_devices(bus); + } + + pe->tstamp = tstamp; + pe->freeze_count = cnt; + + return 0; +} + +/* The longest amount of time to wait for a pci device + * to come back on line, in seconds. + */ +#define MAX_WAIT_FOR_RECOVERY 150 + +static void eeh_handle_normal_event(struct eeh_pe *pe) +{ + struct pci_bus *frozen_bus; + int rc = 0; + enum pci_ers_result result = PCI_ERS_RESULT_NONE; + + frozen_bus = eeh_pe_bus_get(pe); + if (!frozen_bus) { + pr_err("%s: Cannot find PCI bus for PHB#%d-PE#%x\n", + __func__, pe->phb->global_number, pe->addr); + return; + } + + eeh_pe_update_time_stamp(pe); + pe->freeze_count++; + if (pe->freeze_count > EEH_MAX_ALLOWED_FREEZES) + goto excess_failures; + pr_warning("EEH: This PCI device has failed %d times in the last hour\n", + pe->freeze_count); + + /* Walk the various device drivers attached to this slot through + * a reset sequence, giving each an opportunity to do what it needs + * to accomplish the reset. Each child gets a report of the + * status ... if any child can't handle the reset, then the entire + * slot is dlpar removed and added. + */ + pr_info("EEH: Notify device drivers to shutdown\n"); + eeh_pe_dev_traverse(pe, eeh_report_error, &result); + + /* Get the current PCI slot state. This can take a long time, + * sometimes over 3 seconds for certain systems. + */ + rc = eeh_ops->wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000); + if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) { + pr_warning("EEH: Permanent failure\n"); + goto hard_fail; + } + + /* Since rtas may enable MMIO when posting the error log, + * don't post the error log until after all dev drivers + * have been informed. + */ + pr_info("EEH: Collect temporary log\n"); + eeh_slot_error_detail(pe, EEH_LOG_TEMP); + + /* If all device drivers were EEH-unaware, then shut + * down all of the device drivers, and hope they + * go down willingly, without panicing the system. + */ + if (result == PCI_ERS_RESULT_NONE) { + pr_info("EEH: Reset with hotplug activity\n"); + rc = eeh_reset_device(pe, frozen_bus); + if (rc) { + pr_warning("%s: Unable to reset, err=%d\n", + __func__, rc); + goto hard_fail; + } + } + + /* If all devices reported they can proceed, then re-enable MMIO */ + if (result == PCI_ERS_RESULT_CAN_RECOVER) { + pr_info("EEH: Enable I/O for affected devices\n"); + rc = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO); + + if (rc < 0) + goto hard_fail; + if (rc) { + result = PCI_ERS_RESULT_NEED_RESET; + } else { + pr_info("EEH: Notify device drivers to resume I/O\n"); + result = PCI_ERS_RESULT_NONE; + eeh_pe_dev_traverse(pe, eeh_report_mmio_enabled, &result); + } + } + + /* If all devices reported they can proceed, then re-enable DMA */ + if (result == PCI_ERS_RESULT_CAN_RECOVER) { + pr_info("EEH: Enabled DMA for affected devices\n"); + rc = eeh_pci_enable(pe, EEH_OPT_THAW_DMA); + + if (rc < 0) + goto hard_fail; + if (rc) + result = PCI_ERS_RESULT_NEED_RESET; + else + result = PCI_ERS_RESULT_RECOVERED; + } + + /* If any device has a hard failure, then shut off everything. */ + if (result == PCI_ERS_RESULT_DISCONNECT) { + pr_warning("EEH: Device driver gave up\n"); + goto hard_fail; + } + + /* If any device called out for a reset, then reset the slot */ + if (result == PCI_ERS_RESULT_NEED_RESET) { + pr_info("EEH: Reset without hotplug activity\n"); + rc = eeh_reset_device(pe, NULL); + if (rc) { + pr_warning("%s: Cannot reset, err=%d\n", + __func__, rc); + goto hard_fail; + } + + pr_info("EEH: Notify device drivers " + "the completion of reset\n"); + result = PCI_ERS_RESULT_NONE; + eeh_pe_dev_traverse(pe, eeh_report_reset, &result); + } + + /* All devices should claim they have recovered by now. */ + if ((result != PCI_ERS_RESULT_RECOVERED) && + (result != PCI_ERS_RESULT_NONE)) { + pr_warning("EEH: Not recovered\n"); + goto hard_fail; + } + + /* Tell all device drivers that they can resume operations */ + pr_info("EEH: Notify device driver to resume\n"); + eeh_pe_dev_traverse(pe, eeh_report_resume, NULL); + + return; + +excess_failures: + /* + * About 90% of all real-life EEH failures in the field + * are due to poorly seated PCI cards. Only 10% or so are + * due to actual, failed cards. + */ + pr_err("EEH: PHB#%d-PE#%x has failed %d times in the\n" + "last hour and has been permanently disabled.\n" + "Please try reseating or replacing it.\n", + pe->phb->global_number, pe->addr, + pe->freeze_count); + goto perm_error; + +hard_fail: + pr_err("EEH: Unable to recover from failure from PHB#%d-PE#%x.\n" + "Please try reseating or replacing it\n", + pe->phb->global_number, pe->addr); + +perm_error: + eeh_slot_error_detail(pe, EEH_LOG_PERM); + + /* Notify all devices that they're about to go down. */ + eeh_pe_dev_traverse(pe, eeh_report_failure, NULL); + + /* Shut down the device drivers for good. */ + if (frozen_bus) + pcibios_remove_pci_devices(frozen_bus); +} + +static void eeh_handle_special_event(void) +{ + struct eeh_pe *pe, *phb_pe; + struct pci_bus *bus; + struct pci_controller *hose, *tmp; + unsigned long flags; + int rc = 0; + + /* + * The return value from next_error() has been classified as follows. + * It might be good to enumerate them. However, next_error() is only + * supported by PowerNV platform for now. So it would be fine to use + * integer directly: + * + * 4 - Dead IOC 3 - Dead PHB + * 2 - Fenced PHB 1 - Frozen PE + * 0 - No error found + * + */ + rc = eeh_ops->next_error(&pe); + if (rc <= 0) + return; + + switch (rc) { + case 4: + /* Mark all PHBs in dead state */ + eeh_serialize_lock(&flags); + list_for_each_entry_safe(hose, tmp, + &hose_list, list_node) { + phb_pe = eeh_phb_pe_get(hose); + if (!phb_pe) continue; + + eeh_pe_state_mark(phb_pe, + EEH_PE_ISOLATED | EEH_PE_PHB_DEAD); + } + eeh_serialize_unlock(flags); + + /* Purge all events */ + eeh_remove_event(NULL); + break; + case 3: + case 2: + case 1: + /* Mark the PE in fenced state */ + eeh_serialize_lock(&flags); + if (rc == 3) + eeh_pe_state_mark(pe, + EEH_PE_ISOLATED | EEH_PE_PHB_DEAD); + else + eeh_pe_state_mark(pe, + EEH_PE_ISOLATED | EEH_PE_RECOVERING); + eeh_serialize_unlock(flags); + + /* Purge all events of the PHB */ + eeh_remove_event(pe); + break; + default: + pr_err("%s: Invalid value %d from next_error()\n", + __func__, rc); + return; + } + + /* + * For fenced PHB and frozen PE, it's handled as normal + * event. We have to remove the affected PHBs for dead + * PHB and IOC + */ + if (rc == 2 || rc == 1) + eeh_handle_normal_event(pe); + else { + list_for_each_entry_safe(hose, tmp, + &hose_list, list_node) { + phb_pe = eeh_phb_pe_get(hose); + if (!phb_pe || !(phb_pe->state & EEH_PE_PHB_DEAD)) + continue; + + bus = eeh_pe_bus_get(phb_pe); + /* Notify all devices that they're about to go down. */ + eeh_pe_dev_traverse(pe, eeh_report_failure, NULL); + pcibios_remove_pci_devices(bus); + } + } +} + +/** + * eeh_handle_event - Reset a PCI device after hard lockup. + * @pe: EEH PE + * + * While PHB detects address or data parity errors on particular PCI + * slot, the associated PE will be frozen. Besides, DMA's occurring + * to wild addresses (which usually happen due to bugs in device + * drivers or in PCI adapter firmware) can cause EEH error. #SERR, + * #PERR or other misc PCI-related errors also can trigger EEH errors. + * + * Recovery process consists of unplugging the device driver (which + * generated hotplug events to userspace), then issuing a PCI #RST to + * the device, then reconfiguring the PCI config space for all bridges + * & devices under this slot, and then finally restarting the device + * drivers (which cause a second set of hotplug events to go out to + * userspace). + */ +void eeh_handle_event(struct eeh_pe *pe) +{ + if (pe) + eeh_handle_normal_event(pe); + else + eeh_handle_special_event(); +} |
