diff options
Diffstat (limited to 'arch/mn10300/unit-asb2364')
| -rw-r--r-- | arch/mn10300/unit-asb2364/Makefile | 12 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2364/include/unit/clock.h | 29 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2364/include/unit/fpga-regs.h | 52 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2364/include/unit/irq.h | 35 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2364/include/unit/leds.h | 54 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2364/include/unit/serial.h | 151 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2364/include/unit/smsc911x.h | 171 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2364/include/unit/timex.h | 159 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2364/irq-fpga.c | 96 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2364/leds.c | 98 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2364/smsc911x.c | 58 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2364/unit-init.c | 88 |
12 files changed, 1003 insertions, 0 deletions
diff --git a/arch/mn10300/unit-asb2364/Makefile b/arch/mn10300/unit-asb2364/Makefile new file mode 100644 index 000000000000..b3263ecfc4ff --- /dev/null +++ b/arch/mn10300/unit-asb2364/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for the linux kernel. +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). +# +# Note 2! The CFLAGS definitions are now in the main makefile... + +obj-y := unit-init.o leds.o irq-fpga.o + +obj-$(CONFIG_SMSC911X) += smsc911x.o diff --git a/arch/mn10300/unit-asb2364/include/unit/clock.h b/arch/mn10300/unit-asb2364/include/unit/clock.h new file mode 100644 index 000000000000..d34ac9a7508b --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/clock.h @@ -0,0 +1,29 @@ +/* clock.h: unit-specific clocks + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 23-Feb-2007 MEI Add define for watchdog timer. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_CLOCK_H +#define _ASM_UNIT_CLOCK_H + +#ifndef __ASSEMBLY__ + +#define MN10300_IOCLK 100000000UL /* for DDR800 */ +/*#define MN10300_IOCLK 83333333UL */ /* for DDR667 */ +#define MN10300_IOBCLK MN10300_IOCLK /* IOBCLK is equal to IOCLK */ + +#endif /* !__ASSEMBLY__ */ + +#define MN10300_WDCLK 27000000UL + +#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h b/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h new file mode 100644 index 000000000000..7cf12054db65 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h @@ -0,0 +1,52 @@ +/* ASB2364 FPGA registers + */ + +#ifndef _ASM_UNIT_FPGA_REGS_H +#define _ASM_UNIT_FPGA_REGS_H + +#include <asm/cpu-regs.h> + +#ifdef __KERNEL__ + +#define ASB2364_FPGA_REG_RESET_LAN __SYSREG(0xa9001300, u16) +#define ASB2364_FPGA_REG_RESET_UART __SYSREG(0xa9001304, u16) +#define ASB2364_FPGA_REG_RESET_I2C __SYSREG(0xa9001308, u16) +#define ASB2364_FPGA_REG_RESET_USB __SYSREG(0xa900130c, u16) +#define ASB2364_FPGA_REG_RESET_AV __SYSREG(0xa9001310, u16) + +#define ASB2364_FPGA_REG_IRQ(X) __SYSREG(0xa9001590+((X)*4), u16) +#define ASB2364_FPGA_REG_IRQ_LAN ASB2364_FPGA_REG_IRQ(0) +#define ASB2364_FPGA_REG_IRQ_UART ASB2364_FPGA_REG_IRQ(1) +#define ASB2364_FPGA_REG_IRQ_I2C ASB2364_FPGA_REG_IRQ(2) +#define ASB2364_FPGA_REG_IRQ_USB ASB2364_FPGA_REG_IRQ(3) +#define ASB2364_FPGA_REG_IRQ_FPGA ASB2364_FPGA_REG_IRQ(5) + +#define ASB2364_FPGA_REG_MASK(X) __SYSREG(0xa9001590+((X)*4), u16) +#define ASB2364_FPGA_REG_MASK_LAN ASB2364_FPGA_REG_MASK(0) +#define ASB2364_FPGA_REG_MASK_UART ASB2364_FPGA_REG_MASK(1) +#define ASB2364_FPGA_REG_MASK_I2C ASB2364_FPGA_REG_MASK(2) +#define ASB2364_FPGA_REG_MASK_USB ASB2364_FPGA_REG_MASK(3) +#define ASB2364_FPGA_REG_MASK_FPGA ASB2364_FPGA_REG_MASK(5) + +#define ASB2364_FPGA_REG_CPLD5_SET1 __SYSREG(0xa9002500, u16) +#define ASB2364_FPGA_REG_CPLD5_SET2 __SYSREG(0xa9002504, u16) +#define ASB2364_FPGA_REG_CPLD6_SET1 __SYSREG(0xa9002600, u16) +#define ASB2364_FPGA_REG_CPLD6_SET2 __SYSREG(0xa9002604, u16) +#define ASB2364_FPGA_REG_CPLD7_SET1 __SYSREG(0xa9002700, u16) +#define ASB2364_FPGA_REG_CPLD7_SET2 __SYSREG(0xa9002704, u16) +#define ASB2364_FPGA_REG_CPLD8_SET1 __SYSREG(0xa9002800, u16) +#define ASB2364_FPGA_REG_CPLD8_SET2 __SYSREG(0xa9002804, u16) +#define ASB2364_FPGA_REG_CPLD9_SET1 __SYSREG(0xa9002900, u16) +#define ASB2364_FPGA_REG_CPLD9_SET2 __SYSREG(0xa9002904, u16) +#define ASB2364_FPGA_REG_CPLD10_SET1 __SYSREG(0xa9002a00, u16) +#define ASB2364_FPGA_REG_CPLD10_SET2 __SYSREG(0xa9002a04, u16) + +#define SyncExBus() \ + do { \ + unsigned short w; \ + w = *(volatile short *)0xa9000000; \ + } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_UNIT_FPGA_REGS_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/irq.h b/arch/mn10300/unit-asb2364/include/unit/irq.h new file mode 100644 index 000000000000..786148e46565 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/irq.h @@ -0,0 +1,35 @@ +/* ASB2364 FPGA irq numbers + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _UNIT_IRQ_H +#define _UNIT_IRQ_H + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_SMP +#define NR_CPU_IRQS GxICR_NUM_EXT_IRQS +#else +#define NR_CPU_IRQS GxICR_NUM_IRQS +#endif + +enum { + FPGA_LAN_IRQ = NR_CPU_IRQS, + FPGA_UART_IRQ, + FPGA_I2C_IRQ, + FPGA_USB_IRQ, + FPGA_RESERVED_IRQ, + FPGA_FPGA_IRQ, + NR_IRQS +}; + +extern void __init irq_fpga_init(void); + +#endif /* !__ASSEMBLY__ */ +#endif /* _UNIT_IRQ_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/leds.h b/arch/mn10300/unit-asb2364/include/unit/leds.h new file mode 100644 index 000000000000..03a3933ad323 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/leds.h @@ -0,0 +1,54 @@ +/* Unit-specific leds + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_LEDS_H +#define _ASM_UNIT_LEDS_H + +#include <asm/pio-regs.h> +#include <asm/cpu-regs.h> +#include <asm/exceptions.h> + +#define MN10300_USE_7SEGLEDS 0 + +#define ASB2364_7SEGLEDS __SYSREG(0xA9001630, u32) + +/* + * use the 7-segment LEDs to indicate states + */ + +#if MN10300_USE_7SEGLEDS +/* flip the 7-segment LEDs between "Gdb-" and "----" */ +#define mn10300_set_gdbleds(ONOFF) \ + do { \ + ASB2364_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \ + } while (0) +#else +#define mn10300_set_gdbleds(ONOFF) do {} while (0) +#endif + +#if MN10300_USE_7SEGLEDS +/* indicate double-fault by displaying "db-f" on the LEDs */ +#define mn10300_set_dbfleds \ + mov 0x43077f1d,d0 ; \ + mov d0,(ASB2364_7SEGLEDS) +#else +#define mn10300_set_dbfleds +#endif + +#ifndef __ASSEMBLY__ +extern void peripheral_leds_display_exception(enum exception_code); +extern void peripheral_leds_led_chase(void); +extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int); +extern void debug_to_serial(const char *, int); +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/serial.h b/arch/mn10300/unit-asb2364/include/unit/serial.h new file mode 100644 index 000000000000..7f048bbfdfd7 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/serial.h @@ -0,0 +1,151 @@ +/* Unit-specific 8250 serial ports + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_SERIAL_H +#define _ASM_UNIT_SERIAL_H + +#include <asm/cpu-regs.h> +#include <proc/irq.h> +#include <unit/fpga-regs.h> +#include <linux/serial_reg.h> + +#define SERIAL_PORT0_BASE_ADDRESS 0xA8200000 + +#define SERIAL_IRQ XIRQ1 /* single serial (TL16C550C) (Lo) */ + +/* + * The ASB2364 has an 12.288 MHz clock + * for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD (12288000 / 16) + +/* + * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports + */ +#ifndef CONFIG_GDBSTUB_ON_TTYSx + +#define SERIAL_PORT_DFNS \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ + .iomem_reg_shift = 1, \ + .io_type = SERIAL_IO_MEM, \ + }, + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ +} + +#endif /* !__ASSEMBLY__ */ + +#else /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ + +#if defined(CONFIG_GDBSTUB_ON_TTYS0) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ + +#elif defined(CONFIG_GDBSTUB_ON_TTYS1) +#error The ASB2364 does not have a /dev/ttyS1 +#endif + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ + char ch; + +#define LSR_WAIT_FOR(STATE) \ + do {} while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) +#define FLOWCTL_QUERY(LINE) \ + ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; }) +#define FLOWCTL_WAIT_FOR(LINE) \ + do {} while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) +#define FLOWCTL_CLEAR(LINE) \ + do { GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; } while (0) +#define FLOWCTL_SET(LINE) \ + do { GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; } while (0) + + FLOWCTL_SET(DTR); + + for (; n > 0; n--) { + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + + ch = *p++; + if (ch == 0x0a) { + GDBPORT_SERIAL_TX = 0x0d; + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + } + GDBPORT_SERIAL_TX = ch; + } + + FLOWCTL_CLEAR(DTR); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_INITIALIZE \ +do { \ + /* release reset */ \ + ASB2364_FPGA_REG_RESET_UART = 0x0001; \ + SyncExBus(); \ +} while (0) + +#define SERIAL_CHECK_INTERRUPT \ +do { \ + if ((ASB2364_FPGA_REG_IRQ_UART & 0x0001) == 0x0001) { \ + return IRQ_NONE; \ + } \ +} while (0) + +#define SERIAL_CLEAR_INTERRUPT \ +do { \ + ASB2364_FPGA_REG_IRQ_UART = 0x0001; \ + SyncExBus(); \ +} while (0) + +#define SERIAL_SET_INT_MASK \ +do { \ + ASB2364_FPGA_REG_MASK_UART = 0x0001; \ + SyncExBus(); \ +} while (0) + +#define SERIAL_CLEAR_INT_MASK \ +do { \ + ASB2364_FPGA_REG_MASK_UART = 0x0000; \ + SyncExBus(); \ +} while (0) + +#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/smsc911x.h b/arch/mn10300/unit-asb2364/include/unit/smsc911x.h new file mode 100644 index 000000000000..4c1ede535fa9 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/smsc911x.h @@ -0,0 +1,171 @@ +/* Support for the SMSC911x NIC + * + * Copyright (C) 2006 Matsushita Electric Industrial Co., Ltd. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_SMSC911X_H +#define _ASM_UNIT_SMSC911X_H + +#include <linux/netdevice.h> +#include <proc/irq.h> +#include <unit/fpga-regs.h> + +#define MN10300_USE_EXT_EEPROM + + +#define SMSC911X_BASE 0xA8000000UL +#define SMSC911X_BASE_END 0xA8000100UL +#define SMSC911X_IRQ FPGA_LAN_IRQ + +/* + * Allow the FPGA to be initialised by the SMSC911x driver + */ +#undef SMSC_INITIALIZE +#define SMSC_INITIALIZE() \ +do { \ + /* release reset */ \ + ASB2364_FPGA_REG_RESET_LAN = 0x0001; \ + SyncExBus(); \ +} while (0) + +#ifdef MN10300_USE_EXT_EEPROM +#include <linux/delay.h> +#include <unit/clock.h> + +#define EEPROM_ADDRESS 0xA0 +#define MAC_OFFSET 0x0008 +#define USE_IIC_CH 0 /* 0 or 1 */ +#define IIC_OFFSET (0x80000 * USE_IIC_CH) +#define IIC_DTRM __SYSREG(0xd8400000 + IIC_OFFSET, u32) +#define IIC_DREC __SYSREG(0xd8400004 + IIC_OFFSET, u32) +#define IIC_MYADD __SYSREG(0xd8400008 + IIC_OFFSET, u32) +#define IIC_CLK __SYSREG(0xd840000c + IIC_OFFSET, u32) +#define IIC_BRST __SYSREG(0xd8400010 + IIC_OFFSET, u32) +#define IIC_HOLD __SYSREG(0xd8400014 + IIC_OFFSET, u32) +#define IIC_BSTS __SYSREG(0xd8400018 + IIC_OFFSET, u32) +#define IIC_ICR __SYSREG(0xd4000080 + 4 * USE_IIC_CH, u16) + +#define IIC_CLK_PLS ((unsigned short)(MN10300_IOCLK / 100000 - 1)) +#define IIC_CLK_LOW ((unsigned short)(IIC_CLK_PLS / 2)) + +#define SYS_IIC_DTRM_Bit_STA ((unsigned short)0x0400) +#define SYS_IIC_DTRM_Bit_STO ((unsigned short)0x0200) +#define SYS_IIC_DTRM_Bit_ACK ((unsigned short)0x0100) +#define SYS_IIC_DTRM_Bit_DATA ((unsigned short)0x00FF) + +static inline void POLL_INT_REQ(volatile u16 *icr) +{ + unsigned long flags; + u16 tmp; + + while (!(*icr & GxICR_REQUEST)) + ; + flags = arch_local_cli_save(); + tmp = *icr; + *icr = (tmp & GxICR_LEVEL) | GxICR_DETECT; + tmp = *icr; + arch_local_irq_restore(flags); +} + +/* + * Implement the SMSC911x hook for MAC address retrieval + */ +#undef smsc_get_mac +static inline int smsc_get_mac(struct net_device *dev) +{ + unsigned char *mac_buf = dev->dev_addr; + int i; + unsigned short value; + unsigned int data; + int mac_length = 6; + int check; + u16 orig_gicr, tmp; + unsigned long flags; + + /* save original GnICR and clear GnICR.IE */ + flags = arch_local_cli_save(); + orig_gicr = IIC_ICR; + IIC_ICR = orig_gicr & GxICR_LEVEL; + tmp = IIC_ICR; + arch_local_irq_restore(flags); + + IIC_MYADD = 0x00000008; + IIC_CLK = (IIC_CLK_LOW << 16) + (IIC_CLK_PLS); + /* bus hung recovery */ + + while (1) { + check = 0; + for (i = 0; i < 3; i++) { + if ((IIC_BSTS & 0x00000003) == 0x00000003) + check++; + udelay(3); + } + + if (check == 3) { + IIC_BRST = 0x00000003; + break; + } else { + for (i = 0; i < 3; i++) { + IIC_BRST = 0x00000002; + udelay(8); + IIC_BRST = 0x00000003; + udelay(8); + } + } + } + + IIC_BRST = 0x00000002; + IIC_BRST = 0x00000003; + + value = SYS_IIC_DTRM_Bit_STA | SYS_IIC_DTRM_Bit_ACK; + value |= (((unsigned short)EEPROM_ADDRESS & SYS_IIC_DTRM_Bit_DATA) | + (unsigned short)0x0000); + IIC_DTRM = value; + POLL_INT_REQ(&IIC_ICR); + + /** send offset of MAC address in EEPROM **/ + IIC_DTRM = (unsigned char)((MAC_OFFSET & 0xFF00) >> 8); + POLL_INT_REQ(&IIC_ICR); + + IIC_DTRM = (unsigned char)(MAC_OFFSET & 0x00FF); + POLL_INT_REQ(&IIC_ICR); + + udelay(1000); + + value = SYS_IIC_DTRM_Bit_STA; + value |= (((unsigned short)EEPROM_ADDRESS & SYS_IIC_DTRM_Bit_DATA) | + (unsigned short)0x0001); + IIC_DTRM = value; + POLL_INT_REQ(&IIC_ICR); + + IIC_DTRM = 0x00000000; + while (mac_length > 0) { + POLL_INT_REQ(&IIC_ICR); + + data = IIC_DREC; + mac_length--; + if (mac_length == 0) + value = 0x00000300; /* stop IIC bus */ + else if (mac_length == 1) + value = 0x00000100; /* no ack */ + else + value = 0x00000000; /* ack */ + IIC_DTRM = value; + *mac_buf++ = (unsigned char)(data & 0xff); + } + + /* restore GnICR.LV and GnICR.IE */ + flags = arch_local_cli_save(); + IIC_ICR = (orig_gicr & (GxICR_LEVEL | GxICR_ENABLE)); + tmp = IIC_ICR; + arch_local_irq_restore(flags); + + return 0; +} +#endif /* MN10300_USE_EXT_EEPROM */ +#endif /* _ASM_UNIT_SMSC911X_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/timex.h b/arch/mn10300/unit-asb2364/include/unit/timex.h new file mode 100644 index 000000000000..ddb7ed010706 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/timex.h @@ -0,0 +1,159 @@ +/* timex.h: MN2WS0038 architecture timer specifications + * + * Copyright (C) 2002, 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_TIMEX_H +#define _ASM_UNIT_TIMEX_H + +#ifndef __ASSEMBLY__ +#include <linux/irq.h> +#endif /* __ASSEMBLY__ */ + +#include <asm/timer-regs.h> +#include <unit/clock.h> +#include <asm/param.h> + +/* + * jiffies counter specifications + */ + +#define TMJCBR_MAX 0xffffff /* 24bit */ +#define TMJCIRQ TMTIRQ + +#ifndef __ASSEMBLY__ + +#define MN10300_SRC_IOBCLK MN10300_IOBCLK + +#ifndef HZ +# error HZ undeclared. +#endif /* !HZ */ + +#define MN10300_JCCLK (MN10300_SRC_IOBCLK) +#define MN10300_TSCCLK (MN10300_SRC_IOBCLK) + +#define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) +#define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) + +/* Check bit width of MTM interval value that sets base register */ +#if (MN10300_JC_PER_HZ - 1) > TMJCBR_MAX +# error MTM tick timer interval value is overflow. +#endif + +static inline void stop_jiffies_counter(void) +{ + u16 tmp; + TMTMD = 0; + tmp = TMTMD; +} + +static inline void reload_jiffies_counter(u32 cnt) +{ + u32 tmp; + + TMTBR = cnt; + tmp = TMTBR; + + TMTMD = TMTMD_TMTLDE; + TMTMD = TMTMD_TMTCNE; + tmp = TMTMD; +} + +#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_CLOCKEVENTS) && \ + !defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) +/* + * If we aren't using broadcasting, each core needs its own event timer. + * Since CPU0 uses the tick timer which is 24-bits, we use timer 4 & 5 + * cascaded to 32-bits for CPU1 (but only really use 24-bits to match + * CPU0). + */ + +#define TMJC1IRQ TM5IRQ + +static inline void stop_jiffies_counter1(void) +{ + u8 tmp; + TM4MD = 0; + TM5MD = 0; + tmp = TM4MD; + tmp = TM5MD; +} + +static inline void reload_jiffies_counter1(u32 cnt) +{ + u32 tmp; + + TM45BR = cnt; + tmp = TM45BR; + + TM4MD = TM4MD_INIT_COUNTER; + tmp = TM4MD; + + TM5MD = TM5MD_SRC_TM4CASCADE | TM5MD_INIT_COUNTER; + TM5MD = TM5MD_SRC_TM4CASCADE | TM5MD_COUNT_ENABLE; + tmp = TM5MD; + + TM4MD = TM4MD_COUNT_ENABLE; + tmp = TM4MD; +} +#endif /* CONFIG_SMP&GENERIC_CLOCKEVENTS&!GENERIC_CLOCKEVENTS_BROADCAST */ + +#endif /* !__ASSEMBLY__ */ + + +/* + * timestamp counter specifications + */ +#define TMTSCBR_MAX 0xffffffff + +#ifndef __ASSEMBLY__ + +/* Use 32-bit timestamp counter */ +#define TMTSCMD TMSMD +#define TMTSCBR TMSBR +#define TMTSCBC TMSBC +#define TMTSCICR TMSICR + +static inline void startup_timestamp_counter(void) +{ + u32 sync; + + /* set up TMS(Timestamp) 32bit timer register to count real time + * - count down from 4Gig-1 to 0 and wrap at IOBCLK rate + */ + + TMTSCBR = TMTSCBR_MAX; + sync = TMTSCBR; + + TMTSCICR = 0; + sync = TMTSCICR; + + TMTSCMD = TMTMD_TMTLDE; + TMTSCMD = TMTMD_TMTCNE; + sync = TMTSCMD; +} + +static inline void shutdown_timestamp_counter(void) +{ + TMTSCMD = 0; +} + +/* + * we use a cascaded pair of 16-bit down-counting timers to count I/O + * clock cycles for the purposes of time keeping + */ +typedef unsigned long cycles_t; + +static inline cycles_t read_timestamp_counter(void) +{ + return (cycles_t)~TMTSCBC; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/unit-asb2364/irq-fpga.c b/arch/mn10300/unit-asb2364/irq-fpga.c new file mode 100644 index 000000000000..fcf29754e4d1 --- /dev/null +++ b/arch/mn10300/unit-asb2364/irq-fpga.c @@ -0,0 +1,96 @@ +/* ASB2364 FPGA interrupt multiplexing + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <unit/fpga-regs.h> + +/* + * FPGA PIC operations + */ +static void asb2364_fpga_mask(unsigned int irq) +{ + ASB2364_FPGA_REG_MASK(irq - NR_CPU_IRQS) = 0x0001; + SyncExBus(); +} + +static void asb2364_fpga_ack(unsigned int irq) +{ + ASB2364_FPGA_REG_IRQ(irq - NR_CPU_IRQS) = 0x0001; + SyncExBus(); +} + +static void asb2364_fpga_mask_ack(unsigned int irq) +{ + ASB2364_FPGA_REG_MASK(irq - NR_CPU_IRQS) = 0x0001; + SyncExBus(); + ASB2364_FPGA_REG_IRQ(irq - NR_CPU_IRQS) = 0x0001; + SyncExBus(); +} + +static void asb2364_fpga_unmask(unsigned int irq) +{ + ASB2364_FPGA_REG_MASK(irq - NR_CPU_IRQS) = 0x0000; + SyncExBus(); +} + +static struct irq_chip asb2364_fpga_pic = { + .name = "fpga", + .ack = asb2364_fpga_ack, + .mask = asb2364_fpga_mask, + .mask_ack = asb2364_fpga_mask_ack, + .unmask = asb2364_fpga_unmask, +}; + +/* + * FPGA PIC interrupt handler + */ +static irqreturn_t fpga_interrupt(int irq, void *_mask) +{ + if ((ASB2364_FPGA_REG_IRQ_LAN & 0x0001) != 0x0001) + generic_handle_irq(FPGA_LAN_IRQ); + if ((ASB2364_FPGA_REG_IRQ_UART & 0x0001) != 0x0001) + generic_handle_irq(FPGA_UART_IRQ); + if ((ASB2364_FPGA_REG_IRQ_I2C & 0x0001) != 0x0001) + generic_handle_irq(FPGA_I2C_IRQ); + if ((ASB2364_FPGA_REG_IRQ_USB & 0x0001) != 0x0001) + generic_handle_irq(FPGA_USB_IRQ); + if ((ASB2364_FPGA_REG_IRQ_FPGA & 0x0001) != 0x0001) + generic_handle_irq(FPGA_FPGA_IRQ); + + return IRQ_HANDLED; +} + +/* + * Define an interrupt action for each FPGA PIC output + */ +static struct irqaction fpga_irq[] = { + [0] = { + .handler = fpga_interrupt, + .flags = IRQF_DISABLED | IRQF_SHARED, + .name = "fpga", + }, +}; + +/* + * Initialise the FPGA's PIC + */ +void __init irq_fpga_init(void) +{ + int irq; + + for (irq = NR_CPU_IRQS; irq < NR_IRQS; irq++) + set_irq_chip_and_handler(irq, &asb2364_fpga_pic, handle_level_irq); + + /* the FPGA drives the XIRQ1 input on the CPU PIC */ + setup_irq(XIRQ1, &fpga_irq[0]); +} diff --git a/arch/mn10300/unit-asb2364/leds.c b/arch/mn10300/unit-asb2364/leds.c new file mode 100644 index 000000000000..1ff830c372b3 --- /dev/null +++ b/arch/mn10300/unit-asb2364/leds.c @@ -0,0 +1,98 @@ +/* leds.c: ASB2364 peripheral 7seg LEDs x4 support + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/init.h> + +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/intctl-regs.h> +#include <asm/rtc-regs.h> +#include <unit/leds.h> + +#if MN10300_USE_7SEGLEDS +static const u8 asb2364_led_hex_tbl[16] = { + 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0, + 0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c +}; + +static const u32 asb2364_led_chase_tbl[6] = { + ~0x02020202, /* top - segA */ + ~0x04040404, /* right top - segB */ + ~0x08080808, /* right bottom - segC */ + ~0x10101010, /* bottom - segD */ + ~0x20202020, /* left bottom - segE */ + ~0x40404040, /* left top - segF */ +}; + +static unsigned asb2364_led_chase; + +void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points) +{ + u32 leds; + + leds = asb2364_led_hex_tbl[(val/1000) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/100) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/10) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[val % 10]; + leds |= points^0x01010101; + + ASB2364_7SEGLEDS = leds; +} + +void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points) +{ + u32 leds; + + leds = asb2364_led_hex_tbl[(val/1000) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/100) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/10) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[val % 10]; + leds |= points^0x01010101; + + ASB2364_7SEGLEDS = leds; +} + +/* display triple horizontal bar and exception code */ +void peripheral_leds_display_exception(enum exception_code code) +{ + u32 leds; + + leds = asb2364_led_hex_tbl[(code/0x100) % 0x10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(code/0x10) % 0x10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[code % 0x10]; + leds |= 0x6d010101; + + ASB2364_7SEGLEDS = leds; +} + +void peripheral_leds_led_chase(void) +{ + ASB2364_7SEGLEDS = asb2364_led_chase_tbl[asb2364_led_chase]; + asb2364_led_chase++; + if (asb2364_led_chase >= 6) + asb2364_led_chase = 0; +} +#else /* MN10300_USE_7SEGLEDS */ +void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points) { } +void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points) { } +void peripheral_leds_display_exception(enum exception_code code) { } +void peripheral_leds_led_chase(void) { } +#endif /* MN10300_USE_7SEGLEDS */ diff --git a/arch/mn10300/unit-asb2364/smsc911x.c b/arch/mn10300/unit-asb2364/smsc911x.c new file mode 100644 index 000000000000..544a73e94c81 --- /dev/null +++ b/arch/mn10300/unit-asb2364/smsc911x.c @@ -0,0 +1,58 @@ +/* Specification for the SMSC911x NIC + * + * Copyright (C) 2006 Matsushita Electric Industrial Co., Ltd. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/smsc911x.h> +#include <unit/smsc911x.h> + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT, +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .start = SMSC911X_BASE, + .end = SMSC911X_BASE_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SMSC911X_IRQ, + .end = SMSC911X_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + } +}; + +/* + * add platform devices + */ +static int __init unit_device_init(void) +{ + platform_device_register(&smsc911x_device); + return 0; +} + +device_initcall(unit_device_init); diff --git a/arch/mn10300/unit-asb2364/unit-init.c b/arch/mn10300/unit-asb2364/unit-init.c new file mode 100644 index 000000000000..11440803db10 --- /dev/null +++ b/arch/mn10300/unit-asb2364/unit-init.c @@ -0,0 +1,88 @@ +/* ASB2364 initialisation + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/delay.h> + +#include <asm/io.h> +#include <asm/setup.h> +#include <asm/processor.h> +#include <asm/irq.h> +#include <asm/intctl-regs.h> +#include <unit/fpga-regs.h> + +/* + * initialise some of the unit hardware before gdbstub is set up + */ +asmlinkage void __init unit_init(void) +{ + /* set up the external interrupts */ + + /* XIRQ[0]: NAND RXBY */ + /* SET_XIRQ_TRIGGER(0, XIRQ_TRIGGER_LOWLEVEL); */ + + /* XIRQ[1]: LAN, UART, I2C, USB, PCI, FPGA */ + SET_XIRQ_TRIGGER(1, XIRQ_TRIGGER_LOWLEVEL); + + /* XIRQ[2]: Extend Slot 1-9 */ + /* SET_XIRQ_TRIGGER(2, XIRQ_TRIGGER_LOWLEVEL); */ + +#if defined(CONFIG_EXT_SERIAL_IRQ_LEVEL) && \ + defined(CONFIG_ETHERNET_IRQ_LEVEL) && \ + (CONFIG_EXT_SERIAL_IRQ_LEVEL != CONFIG_ETHERNET_IRQ_LEVEL) +# error CONFIG_EXT_SERIAL_IRQ_LEVEL != CONFIG_ETHERNET_IRQ_LEVEL +#endif + +#if defined(CONFIG_EXT_SERIAL_IRQ_LEVEL) + set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL)); +#elif defined(CONFIG_ETHERNET_IRQ_LEVEL) + set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_ETHERNET_IRQ_LEVEL)); +#endif +} + +/* + * initialise the rest of the unit hardware after gdbstub is ready + */ +asmlinkage void __init unit_setup(void) +{ + +} + +/* + * initialise the external interrupts used by a unit of this type + */ +void __init unit_init_IRQ(void) +{ + unsigned int extnum; + + for (extnum = 0 ; extnum < NR_XIRQS ; extnum++) { + switch (GET_XIRQ_TRIGGER(extnum)) { + /* LEVEL triggered interrupts should be made + * post-ACK'able as they hold their lines until + * serviced + */ + case XIRQ_TRIGGER_HILEVEL: + case XIRQ_TRIGGER_LOWLEVEL: + mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum)); + break; + default: + break; + } + } + +#define IRQCTL __SYSREG(0xd5000090, u32) + IRQCTL |= 0x02; + + irq_fpga_init(); +} |
