diff options
Diffstat (limited to 'arch/mips')
581 files changed, 65992 insertions, 697 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 49896a2a1d72..cd5fbf6f0784 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -211,6 +211,7 @@ config MIPS_MALTA select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_MIPS_CMP if BROKEN # because SYNC_R4K is broken select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_SMARTMIPS help @@ -567,7 +568,7 @@ config MIKROTIK_RB532 select SYS_SUPPORTS_LITTLE_ENDIAN select SWAP_IO_SPACE select BOOT_RAW - select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB help Support the Mikrotik(tm) RouterBoard 532 series, based on the IDT RC32434 SoC. @@ -597,7 +598,7 @@ config WR_PPMC endchoice -source "arch/mips/au1000/Kconfig" +source "arch/mips/alchemy/Kconfig" source "arch/mips/basler/excite/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" @@ -609,11 +610,6 @@ source "arch/mips/vr41xx/Kconfig" endmenu -config GENERIC_LOCKBREAK - bool - default y - depends on SMP && PREEMPT - config RWSEM_GENERIC_SPINLOCK bool default y @@ -1272,6 +1268,13 @@ config CPU_SUPPORTS_32BIT_KERNEL config CPU_SUPPORTS_64BIT_KERNEL bool +# +# Set to y for ptrace access to watch registers. +# +config HARDWARE_WATCHPOINTS + bool + default y if CPU_MIPS32 || CPU_MIPS64 + menu "Kernel type" choice @@ -1403,7 +1406,6 @@ config MIPS_MT_SMTC depends on CPU_MIPS32_R2 #depends on CPU_MIPS64_R2 # once there is hardware ... depends on SYS_SUPPORTS_MULTITHREADING - select GENERIC_CLOCKEVENTS_BROADCAST select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_IRQ_EI select MIPS_MT @@ -1451,32 +1453,17 @@ config MIPS_VPE_LOADER Includes a loader for loading an elf relocatable object onto another VPE and running it. -config MIPS_MT_SMTC_INSTANT_REPLAY - bool "Low-latency Dispatch of Deferred SMTC IPIs" - depends on MIPS_MT_SMTC && !PREEMPT - default y - help - SMTC pseudo-interrupts between TCs are deferred and queued - if the target TC is interrupt-inhibited (IXMT). In the first - SMTC prototypes, these queued IPIs were serviced on return - to user mode, or on entry into the kernel idle loop. The - INSTANT_REPLAY option dispatches them as part of local_irq_restore() - processing, which adds runtime overhead (hence the option to turn - it off), but ensures that IPIs are handled promptly even under - heavy I/O interrupt load. - config MIPS_MT_SMTC_IM_BACKSTOP bool "Use per-TC register bits as backstop for inhibited IM bits" depends on MIPS_MT_SMTC - default y + default n help To support multiple TC microthreads acting as "CPUs" within a VPE, VPE-wide interrupt mask bits must be specially manipulated during interrupt handling. To support legacy drivers and interrupt controller management code, SMTC has a "backstop" to track and if necessary restore the interrupt mask. This has some performance - impact on interrupt service overhead. Disable it only if you know - what you are doing. + impact on interrupt service overhead. config MIPS_MT_SMTC_IRQAFF bool "Support IRQ affinity API" @@ -1486,10 +1473,8 @@ config MIPS_MT_SMTC_IRQAFF Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.) for SMTC Linux kernel. Requires platform support, of which an example can be found in the MIPS kernel i8259 and Malta - platform code. It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY - be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to - interrupt dispatch, and should be used only if you know what - you are doing. + platform code. Adds some overhead to interrupt dispatch, and + should be used only if you know what you are doing. config MIPS_VPE_LOADER_TOM bool "Load VPE program into memory hidden from linux" @@ -1517,6 +1502,18 @@ config MIPS_APSP_KSPD "exit" syscall notifying other kernel modules the SP program is exiting. You probably want to say yes here. +config MIPS_CMP + bool "MIPS CMP framework support" + depends on SYS_SUPPORTS_MIPS_CMP + select SYNC_R4K if BROKEN + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_SCHED_SMT if SMP + select WEAK_ORDERING + default n + help + This is a placeholder option for the GCMP work. It will need to + be handled differently... + config SB1_PASS_1_WORKAROUNDS bool depends on CPU_SB1_PASS_1 @@ -1693,6 +1690,9 @@ config SMP config SMP_UP bool +config SYS_SUPPORTS_MIPS_CMP + bool + config SYS_SUPPORTS_SMP bool @@ -1740,17 +1740,6 @@ config NR_CPUS performance should round up your number of processors to the next power of two. -config MIPS_CMP - bool "MIPS CMP framework support" - depends on SMP - select SYNC_R4K - select SYS_SUPPORTS_SCHED_SMT - select WEAK_ORDERING - default n - help - This is a placeholder option for the GCMP work. It will need to - be handled differently... - source "kernel/time/Kconfig" # diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 9aab51caf16a..7f39fd8a91fe 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -170,123 +170,123 @@ libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/ # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. # core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ -cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/asm-mips/mach-jazz +cflags-$(CONFIG_MACH_JAZZ) += -I$(srctree)/arch/mips/include/asm/mach-jazz load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 # # Common Alchemy Au1x00 stuff # -core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/ -cflags-$(CONFIG_SOC_AU1X00) += -Iinclude/asm-mips/mach-au1x00 +core-$(CONFIG_SOC_AU1X00) += arch/mips/alchemy/common/ +cflags-$(CONFIG_SOC_AU1X00) += -I$(srctree)/arch/mips/include/asm/mach-au1x00 # # AMD Alchemy Pb1000 eval board # -libs-$(CONFIG_MIPS_PB1000) += arch/mips/au1000/pb1000/ -cflags-$(CONFIG_MIPS_PB1000) += -Iinclude/asm-mips/mach-pb1x00 +libs-$(CONFIG_MIPS_PB1000) += arch/mips/alchemy/pb1000/ +cflags-$(CONFIG_MIPS_PB1000) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1000) += 0xffffffff80100000 # # AMD Alchemy Pb1100 eval board # -libs-$(CONFIG_MIPS_PB1100) += arch/mips/au1000/pb1100/ -cflags-$(CONFIG_MIPS_PB1100) += -Iinclude/asm-mips/mach-pb1x00 +libs-$(CONFIG_MIPS_PB1100) += arch/mips/alchemy/pb1100/ +cflags-$(CONFIG_MIPS_PB1100) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1100) += 0xffffffff80100000 # # AMD Alchemy Pb1500 eval board # -libs-$(CONFIG_MIPS_PB1500) += arch/mips/au1000/pb1500/ -cflags-$(CONFIG_MIPS_PB1500) += -Iinclude/asm-mips/mach-pb1x00 +libs-$(CONFIG_MIPS_PB1500) += arch/mips/alchemy/pb1500/ +cflags-$(CONFIG_MIPS_PB1500) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1500) += 0xffffffff80100000 # # AMD Alchemy Pb1550 eval board # -libs-$(CONFIG_MIPS_PB1550) += arch/mips/au1000/pb1550/ -cflags-$(CONFIG_MIPS_PB1550) += -Iinclude/asm-mips/mach-pb1x00 +libs-$(CONFIG_MIPS_PB1550) += arch/mips/alchemy/pb1550/ +cflags-$(CONFIG_MIPS_PB1550) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000 # # AMD Alchemy Pb1200 eval board # -libs-$(CONFIG_MIPS_PB1200) += arch/mips/au1000/pb1200/ -cflags-$(CONFIG_MIPS_PB1200) += -Iinclude/asm-mips/mach-pb1x00 +libs-$(CONFIG_MIPS_PB1200) += arch/mips/alchemy/pb1200/ +cflags-$(CONFIG_MIPS_PB1200) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000 # # AMD Alchemy Db1000 eval board # -libs-$(CONFIG_MIPS_DB1000) += arch/mips/au1000/db1x00/ -cflags-$(CONFIG_MIPS_DB1000) += -Iinclude/asm-mips/mach-db1x00 +libs-$(CONFIG_MIPS_DB1000) += arch/mips/alchemy/db1x00/ +cflags-$(CONFIG_MIPS_DB1000) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1000) += 0xffffffff80100000 # # AMD Alchemy Db1100 eval board # -libs-$(CONFIG_MIPS_DB1100) += arch/mips/au1000/db1x00/ -cflags-$(CONFIG_MIPS_DB1100) += -Iinclude/asm-mips/mach-db1x00 +libs-$(CONFIG_MIPS_DB1100) += arch/mips/alchemy/db1x00/ +cflags-$(CONFIG_MIPS_DB1100) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1100) += 0xffffffff80100000 # # AMD Alchemy Db1500 eval board # -libs-$(CONFIG_MIPS_DB1500) += arch/mips/au1000/db1x00/ -cflags-$(CONFIG_MIPS_DB1500) += -Iinclude/asm-mips/mach-db1x00 +libs-$(CONFIG_MIPS_DB1500) += arch/mips/alchemy/db1x00/ +cflags-$(CONFIG_MIPS_DB1500) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1500) += 0xffffffff80100000 # # AMD Alchemy Db1550 eval board # -libs-$(CONFIG_MIPS_DB1550) += arch/mips/au1000/db1x00/ -cflags-$(CONFIG_MIPS_DB1550) += -Iinclude/asm-mips/mach-db1x00 +libs-$(CONFIG_MIPS_DB1550) += arch/mips/alchemy/db1x00/ +cflags-$(CONFIG_MIPS_DB1550) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000 # # AMD Alchemy Db1200 eval board # -libs-$(CONFIG_MIPS_DB1200) += arch/mips/au1000/pb1200/ -cflags-$(CONFIG_MIPS_DB1200) += -Iinclude/asm-mips/mach-db1x00 +libs-$(CONFIG_MIPS_DB1200) += arch/mips/alchemy/pb1200/ +cflags-$(CONFIG_MIPS_DB1200) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000 # # AMD Alchemy Bosporus eval board # -libs-$(CONFIG_MIPS_BOSPORUS) += arch/mips/au1000/db1x00/ -cflags-$(CONFIG_MIPS_BOSPORUS) += -Iinclude/asm-mips/mach-db1x00 +libs-$(CONFIG_MIPS_BOSPORUS) += arch/mips/alchemy/db1x00/ +cflags-$(CONFIG_MIPS_BOSPORUS) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_BOSPORUS) += 0xffffffff80100000 # # AMD Alchemy Mirage eval board # -libs-$(CONFIG_MIPS_MIRAGE) += arch/mips/au1000/db1x00/ -cflags-$(CONFIG_MIPS_MIRAGE) += -Iinclude/asm-mips/mach-db1x00 +libs-$(CONFIG_MIPS_MIRAGE) += arch/mips/alchemy/db1x00/ +cflags-$(CONFIG_MIPS_MIRAGE) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_MIRAGE) += 0xffffffff80100000 # # 4G-Systems eval board # -libs-$(CONFIG_MIPS_MTX1) += arch/mips/au1000/mtx-1/ +libs-$(CONFIG_MIPS_MTX1) += arch/mips/alchemy/mtx-1/ load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000 # # MyCable eval board # -libs-$(CONFIG_MIPS_XXS1500) += arch/mips/au1000/xxs1500/ +libs-$(CONFIG_MIPS_XXS1500) += arch/mips/alchemy/xxs1500/ load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000 # # Cobalt Server # core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/ -cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/mach-cobalt +cflags-$(CONFIG_MIPS_COBALT) += -I$(srctree)/arch/mips/include/asm/mach-cobalt load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000 # # DECstation family # core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/ -cflags-$(CONFIG_MACH_DECSTATION)+= -Iinclude/asm-mips/mach-dec +cflags-$(CONFIG_MACH_DECSTATION)+= -I$(srctree)/arch/mips/include/asm/mach-dec libs-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/prom/ load-$(CONFIG_MACH_DECSTATION) += 0xffffffff80040000 @@ -294,7 +294,7 @@ load-$(CONFIG_MACH_DECSTATION) += 0xffffffff80040000 # Wind River PPMC Board (4KC + GT64120) # core-$(CONFIG_WR_PPMC) += arch/mips/gt64120/wrppmc/ -cflags-$(CONFIG_WR_PPMC) += -Iinclude/asm-mips/mach-wrppmc +cflags-$(CONFIG_WR_PPMC) += -I$(srctree)/arch/mips/include/asm/mach-wrppmc load-$(CONFIG_WR_PPMC) += 0xffffffff80100000 # @@ -302,13 +302,13 @@ load-$(CONFIG_WR_PPMC) += 0xffffffff80100000 # core-$(CONFIG_LEMOTE_FULONG) +=arch/mips/lemote/lm2e/ load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000 -cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote +cflags-$(CONFIG_LEMOTE_FULONG) += -I$(srctree)/arch/mips/include/asm/mach-lemote # # MIPS Malta board # core-$(CONFIG_MIPS_MALTA) += arch/mips/mti-malta/ -cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-malta +cflags-$(CONFIG_MIPS_MALTA) += -I$(srctree)/arch/mips/include/asm/mach-malta load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000 all-$(CONFIG_MIPS_MALTA) := vmlinux.bin @@ -316,14 +316,14 @@ all-$(CONFIG_MIPS_MALTA) := vmlinux.bin # MIPS SIM # core-$(CONFIG_MIPS_SIM) += arch/mips/mipssim/ -cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-mipssim +cflags-$(CONFIG_MIPS_SIM) += -I$(srctree)/arch/mips/include/asm/mach-mipssim load-$(CONFIG_MIPS_SIM) += 0x80100000 # # PMC-Sierra MSP SOCs # core-$(CONFIG_PMC_MSP) += arch/mips/pmc-sierra/msp71xx/ -cflags-$(CONFIG_PMC_MSP) += -Iinclude/asm-mips/pmc-sierra/msp71xx \ +cflags-$(CONFIG_PMC_MSP) += -I$(srctree)/arch/mips/include/asm/pmc-sierra/msp71xx \ -mno-branch-likely load-$(CONFIG_PMC_MSP) += 0xffffffff80100000 @@ -331,28 +331,28 @@ load-$(CONFIG_PMC_MSP) += 0xffffffff80100000 # PMC-Sierra Yosemite # core-$(CONFIG_PMC_YOSEMITE) += arch/mips/pmc-sierra/yosemite/ -cflags-$(CONFIG_PMC_YOSEMITE) += -Iinclude/asm-mips/mach-yosemite +cflags-$(CONFIG_PMC_YOSEMITE) += -I$(srctree)/arch/mips/include/asm/mach-yosemite load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000 # # Basler eXcite # core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/ -cflags-$(CONFIG_BASLER_EXCITE) += -Iinclude/asm-mips/mach-excite +cflags-$(CONFIG_BASLER_EXCITE) += -I$(srctree)/arch/mips/include/asm/mach-excite load-$(CONFIG_BASLER_EXCITE) += 0x80100000 # # LASAT platforms # core-$(CONFIG_LASAT) += arch/mips/lasat/ -cflags-$(CONFIG_LASAT) += -Iinclude/asm-mips/mach-lasat +cflags-$(CONFIG_LASAT) += -I$(srctree)/arch/mips/include/asm/mach-lasat load-$(CONFIG_LASAT) += 0xffffffff80000000 # # Common VR41xx # core-$(CONFIG_MACH_VR41XX) += arch/mips/vr41xx/common/ -cflags-$(CONFIG_MACH_VR41XX) += -Iinclude/asm-mips/mach-vr41xx +cflags-$(CONFIG_MACH_VR41XX) += -I$(srctree)/arch/mips/include/asm/mach-vr41xx # # ZAO Networks Capcella (VR4131) @@ -385,13 +385,13 @@ load-$(CONFIG_TANBAC_TB022X) += 0xffffffff80000000 # Common NXP PNX8550 # core-$(CONFIG_SOC_PNX8550) += arch/mips/nxp/pnx8550/common/ -cflags-$(CONFIG_SOC_PNX8550) += -Iinclude/asm-mips/mach-pnx8550 +cflags-$(CONFIG_SOC_PNX8550) += -I$(srctree)/arch/mips/include/asm/mach-pnx8550 # # NXP PNX8550 JBS board # libs-$(CONFIG_PNX8550_JBS) += arch/mips/nxp/pnx8550/jbs/ -#cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550 +#cflags-$(CONFIG_PNX8550_JBS) += -I$(srctree)/arch/mips/include/asm/mach-pnx8550 load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000 # NXP PNX8550 STB810 board @@ -402,7 +402,7 @@ load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000 # NEC EMMA2RH boards # core-$(CONFIG_EMMA2RH) += arch/mips/emma2rh/common/ -cflags-$(CONFIG_EMMA2RH) += -Iinclude/asm-mips/mach-emma2rh +cflags-$(CONFIG_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh # NEC EMMA2RH Mark-eins core-$(CONFIG_MARKEINS) += arch/mips/emma2rh/markeins/ @@ -418,7 +418,7 @@ load-$(CONFIG_MARKEINS) += 0xffffffff88100000 # address by 8kb. # core-$(CONFIG_SGI_IP22) += arch/mips/sgi-ip22/ -cflags-$(CONFIG_SGI_IP22) += -Iinclude/asm-mips/mach-ip22 +cflags-$(CONFIG_SGI_IP22) += -I$(srctree)/arch/mips/include/asm/mach-ip22 ifdef CONFIG_32BIT load-$(CONFIG_SGI_IP22) += 0xffffffff88002000 endif @@ -435,7 +435,7 @@ endif # ifdef CONFIG_SGI_IP27 core-$(CONFIG_SGI_IP27) += arch/mips/sgi-ip27/ -cflags-$(CONFIG_SGI_IP27) += -Iinclude/asm-mips/mach-ip27 +cflags-$(CONFIG_SGI_IP27) += -I$(srctree)/arch/mips/include/asm/mach-ip27 ifdef CONFIG_MAPPED_KERNEL load-$(CONFIG_SGI_IP27) += 0xc00000004001c000 OBJCOPYFLAGS := --change-addresses=0x3fffffff80000000 @@ -460,7 +460,7 @@ ifdef CONFIG_SGI_IP28 endif endif core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/ -cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -Iinclude/asm-mips/mach-ip28 +cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -I$(srctree)/arch/mips/include/asm/mach-ip28 load-$(CONFIG_SGI_IP28) += 0xa800000020004000 # @@ -472,7 +472,7 @@ load-$(CONFIG_SGI_IP28) += 0xa800000020004000 # will break. # core-$(CONFIG_SGI_IP32) += arch/mips/sgi-ip32/ -cflags-$(CONFIG_SGI_IP32) += -Iinclude/asm-mips/mach-ip32 +cflags-$(CONFIG_SGI_IP32) += -I$(srctree)/arch/mips/include/asm/mach-ip32 load-$(CONFIG_SGI_IP32) += 0xffffffff80004000 # @@ -484,22 +484,22 @@ load-$(CONFIG_SGI_IP32) += 0xffffffff80004000 # core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/sb1250/ core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/common/ -cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte \ +cflags-$(CONFIG_SIBYTE_BCM112X) += -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/sb1250/ core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/common/ -cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte \ +cflags-$(CONFIG_SIBYTE_SB1250) += -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/bcm1480/ core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/common/ -cflags-$(CONFIG_SIBYTE_BCM1x55) += -Iinclude/asm-mips/mach-sibyte \ +cflags-$(CONFIG_SIBYTE_BCM1x55) += -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/bcm1480/ core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/common/ -cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \ +cflags-$(CONFIG_SIBYTE_BCM1x80) += -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL # @@ -529,14 +529,14 @@ load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000 # Broadcom BCM47XX boards # core-$(CONFIG_BCM47XX) += arch/mips/bcm47xx/ -cflags-$(CONFIG_BCM47XX) += -Iinclude/asm-mips/mach-bcm47xx +cflags-$(CONFIG_BCM47XX) += -I$(srctree)/arch/mips/include/asm/mach-bcm47xx load-$(CONFIG_BCM47XX) := 0xffffffff80001000 # # SNI RM # core-$(CONFIG_SNI_RM) += arch/mips/sni/ -cflags-$(CONFIG_SNI_RM) += -Iinclude/asm-mips/mach-rm +cflags-$(CONFIG_SNI_RM) += -I$(srctree)/arch/mips/include/asm/mach-rm ifdef CONFIG_CPU_LITTLE_ENDIAN load-$(CONFIG_SNI_RM) += 0xffffffff80600000 else @@ -548,10 +548,10 @@ all-$(CONFIG_SNI_RM) := vmlinux.ecoff # Common TXx9 # core-$(CONFIG_MACH_TX39XX) += arch/mips/txx9/generic/ -cflags-$(CONFIG_MACH_TX39XX) += -Iinclude/asm-mips/mach-tx39xx +cflags-$(CONFIG_MACH_TX39XX) += -I$(srctree)/arch/mips/include/asm/mach-tx39xx load-$(CONFIG_MACH_TX39XX) += 0xffffffff80050000 core-$(CONFIG_MACH_TX49XX) += arch/mips/txx9/generic/ -cflags-$(CONFIG_MACH_TX49XX) += -Iinclude/asm-mips/mach-tx49xx +cflags-$(CONFIG_MACH_TX49XX) += -I$(srctree)/arch/mips/include/asm/mach-tx49xx load-$(CONFIG_MACH_TX49XX) += 0xffffffff80100000 # @@ -563,21 +563,17 @@ core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/txx9/jmr3927/ # Routerboard 532 board # core-$(CONFIG_MIKROTIK_RB532) += arch/mips/rb532/ -cflags-$(CONFIG_MIKROTIK_RB532) += -Iinclude/asm-mips/mach-rc32434 +cflags-$(CONFIG_MIKROTIK_RB532) += -I$(srctree)/arch/mips/include/asm/mach-rc32434 load-$(CONFIG_MIKROTIK_RB532) += 0xffffffff80101000 # -# Toshiba RBTX4927 board or -# Toshiba RBTX4937 board +# Toshiba RBTX49XX boards # core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/txx9/rbtx4927/ - -# -# Toshiba RBTX4938 board -# core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/ +core-$(CONFIG_TOSHIBA_RBTX4939) += arch/mips/txx9/rbtx4939/ -cflags-y += -Iinclude/asm-mips/mach-generic +cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic drivers-$(CONFIG_PCI) += arch/mips/pci/ ifdef CONFIG_32BIT diff --git a/arch/mips/au1000/Kconfig b/arch/mips/alchemy/Kconfig index e4a057d80ab6..e4a057d80ab6 100644 --- a/arch/mips/au1000/Kconfig +++ b/arch/mips/alchemy/Kconfig diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/alchemy/common/Makefile index df48fd65bbf3..df48fd65bbf3 100644 --- a/arch/mips/au1000/common/Makefile +++ b/arch/mips/alchemy/common/Makefile diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/alchemy/common/au1xxx_irqmap.c index c7ca1596394c..c7ca1596394c 100644 --- a/arch/mips/au1000/common/au1xxx_irqmap.c +++ b/arch/mips/alchemy/common/au1xxx_irqmap.c diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/alchemy/common/clocks.c index 043429d17c5f..043429d17c5f 100644 --- a/arch/mips/au1000/common/clocks.c +++ b/arch/mips/alchemy/common/clocks.c diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/alchemy/common/cputable.c index ba6430bc2d03..ba6430bc2d03 100644 --- a/arch/mips/au1000/common/cputable.c +++ b/arch/mips/alchemy/common/cputable.c diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index 601ee9180ee4..601ee9180ee4 100644 --- a/arch/mips/au1000/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/alchemy/common/dma.c index d6fbda232e6a..d6fbda232e6a 100644 --- a/arch/mips/au1000/common/dma.c +++ b/arch/mips/alchemy/common/dma.c diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/alchemy/common/gpio.c index b485d94ce8a5..e660ddd611c4 100644 --- a/arch/mips/au1000/common/gpio.c +++ b/arch/mips/alchemy/common/gpio.c @@ -48,7 +48,7 @@ static void au1xxx_gpio2_write(unsigned gpio, int value) { gpio -= AU1XXX_GPIO_BASE; - gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio); + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); } static int au1xxx_gpio2_direction_input(unsigned gpio) @@ -61,7 +61,8 @@ static int au1xxx_gpio2_direction_input(unsigned gpio) static int au1xxx_gpio2_direction_output(unsigned gpio, int value) { gpio -= AU1XXX_GPIO_BASE; - gpio2->dir = (0x01 << gpio) | (value << gpio); + gpio2->dir |= 0x01 << gpio; + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); return 0; } @@ -90,6 +91,7 @@ static int au1xxx_gpio1_direction_input(unsigned gpio) static int au1xxx_gpio1_direction_output(unsigned gpio, int value) { gpio1->trioutclr = (0x01 & gpio); + au1xxx_gpio1_write(gpio, value); return 0; } diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/alchemy/common/irq.c index 40c6ceceb5f9..40c6ceceb5f9 100644 --- a/arch/mips/au1000/common/irq.c +++ b/arch/mips/alchemy/common/irq.c diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/alchemy/common/pci.c index 7866cf50cf99..7866cf50cf99 100644 --- a/arch/mips/au1000/common/pci.c +++ b/arch/mips/alchemy/common/pci.c diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/alchemy/common/platform.c index dc8a67efac28..dc8a67efac28 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/alchemy/common/platform.c diff --git a/arch/mips/au1000/common/power.c b/arch/mips/alchemy/common/power.c index bd854a6d1d89..bd854a6d1d89 100644 --- a/arch/mips/au1000/common/power.c +++ b/arch/mips/alchemy/common/power.c diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/alchemy/common/prom.c index 18b310b475ca..18b310b475ca 100644 --- a/arch/mips/au1000/common/prom.c +++ b/arch/mips/alchemy/common/prom.c diff --git a/arch/mips/au1000/common/puts.c b/arch/mips/alchemy/common/puts.c index 55bbe24d45b6..55bbe24d45b6 100644 --- a/arch/mips/au1000/common/puts.c +++ b/arch/mips/alchemy/common/puts.c diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/alchemy/common/reset.c index d555429c8d6f..d555429c8d6f 100644 --- a/arch/mips/au1000/common/reset.c +++ b/arch/mips/alchemy/common/reset.c diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/alchemy/common/setup.c index 1ac6b06f42a3..1ac6b06f42a3 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/alchemy/common/setup.c diff --git a/arch/mips/au1000/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S index 4b3cf021a454..3006e270c8bc 100644 --- a/arch/mips/au1000/common/sleeper.S +++ b/arch/mips/alchemy/common/sleeper.S @@ -79,12 +79,12 @@ LEAF(save_and_sleep) /* Put SDRAM into self refresh. Preload instructions into cache, * issue a precharge, then auto refresh, then sleep commands to it. */ - la t0, sdsleep + la t0, sdsleep .set mips3 - cache 0x14, 0(t0) - cache 0x14, 32(t0) - cache 0x14, 64(t0) - cache 0x14, 96(t0) + cache 0x14, 0(t0) + cache 0x14, 32(t0) + cache 0x14, 64(t0) + cache 0x14, 96(t0) .set mips0 sdsleep: diff --git a/arch/mips/au1000/common/time.c b/arch/mips/alchemy/common/time.c index 563d9390a872..563d9390a872 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/alchemy/common/time.c diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/alchemy/db1x00/Makefile index 274db3b55d82..274db3b55d82 100644 --- a/arch/mips/au1000/db1x00/Makefile +++ b/arch/mips/alchemy/db1x00/Makefile diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/alchemy/db1x00/board_setup.c index 9e5ccbbfcedd..9e5ccbbfcedd 100644 --- a/arch/mips/au1000/db1x00/board_setup.c +++ b/arch/mips/alchemy/db1x00/board_setup.c diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/alchemy/db1x00/init.c index 847413514964..847413514964 100644 --- a/arch/mips/au1000/db1x00/init.c +++ b/arch/mips/alchemy/db1x00/init.c diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/alchemy/db1x00/irqmap.c index 94c090e8bf7a..94c090e8bf7a 100644 --- a/arch/mips/au1000/db1x00/irqmap.c +++ b/arch/mips/alchemy/db1x00/irqmap.c diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/alchemy/mtx-1/Makefile index 7c67b3d33bec..7c67b3d33bec 100644 --- a/arch/mips/au1000/mtx-1/Makefile +++ b/arch/mips/alchemy/mtx-1/Makefile diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c index 3f8079186cf2..3f8079186cf2 100644 --- a/arch/mips/au1000/mtx-1/board_setup.c +++ b/arch/mips/alchemy/mtx-1/board_setup.c diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c index 3bae13c28954..3bae13c28954 100644 --- a/arch/mips/au1000/mtx-1/init.c +++ b/arch/mips/alchemy/mtx-1/init.c diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/alchemy/mtx-1/irqmap.c index f2bf02951e9c..f2bf02951e9c 100644 --- a/arch/mips/au1000/mtx-1/irqmap.c +++ b/arch/mips/alchemy/mtx-1/irqmap.c diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c index 8b5914d1241f..8b5914d1241f 100644 --- a/arch/mips/au1000/mtx-1/platform.c +++ b/arch/mips/alchemy/mtx-1/platform.c diff --git a/arch/mips/au1000/pb1000/Makefile b/arch/mips/alchemy/pb1000/Makefile index 99bbec0ca41b..99bbec0ca41b 100644 --- a/arch/mips/au1000/pb1000/Makefile +++ b/arch/mips/alchemy/pb1000/Makefile diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/alchemy/pb1000/board_setup.c index 25df167a95b3..25df167a95b3 100644 --- a/arch/mips/au1000/pb1000/board_setup.c +++ b/arch/mips/alchemy/pb1000/board_setup.c diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/alchemy/pb1000/init.c index 8a9c7d57208d..8a9c7d57208d 100644 --- a/arch/mips/au1000/pb1000/init.c +++ b/arch/mips/alchemy/pb1000/init.c diff --git a/arch/mips/au1000/pb1000/irqmap.c b/arch/mips/alchemy/pb1000/irqmap.c index b3d56b0af321..b3d56b0af321 100644 --- a/arch/mips/au1000/pb1000/irqmap.c +++ b/arch/mips/alchemy/pb1000/irqmap.c diff --git a/arch/mips/au1000/pb1100/Makefile b/arch/mips/alchemy/pb1100/Makefile index 793e97c49e46..793e97c49e46 100644 --- a/arch/mips/au1000/pb1100/Makefile +++ b/arch/mips/alchemy/pb1100/Makefile diff --git a/arch/mips/au1000/pb1100/board_setup.c b/arch/mips/alchemy/pb1100/board_setup.c index c0bfd59a7a36..c0bfd59a7a36 100644 --- a/arch/mips/au1000/pb1100/board_setup.c +++ b/arch/mips/alchemy/pb1100/board_setup.c diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/alchemy/pb1100/init.c index 7c6792308bc5..7c6792308bc5 100644 --- a/arch/mips/au1000/pb1100/init.c +++ b/arch/mips/alchemy/pb1100/init.c diff --git a/arch/mips/au1000/pb1100/irqmap.c b/arch/mips/alchemy/pb1100/irqmap.c index 9b7dd8b41283..9b7dd8b41283 100644 --- a/arch/mips/au1000/pb1100/irqmap.c +++ b/arch/mips/alchemy/pb1100/irqmap.c diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/alchemy/pb1200/Makefile index d678adf7ce85..d678adf7ce85 100644 --- a/arch/mips/au1000/pb1200/Makefile +++ b/arch/mips/alchemy/pb1200/Makefile diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/alchemy/pb1200/board_setup.c index 6cb2115059ad..6cb2115059ad 100644 --- a/arch/mips/au1000/pb1200/board_setup.c +++ b/arch/mips/alchemy/pb1200/board_setup.c diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/alchemy/pb1200/init.c index e9b2a0fd48ae..e9b2a0fd48ae 100644 --- a/arch/mips/au1000/pb1200/init.c +++ b/arch/mips/alchemy/pb1200/init.c diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/alchemy/pb1200/irqmap.c index 2a505ad8715b..2a505ad8715b 100644 --- a/arch/mips/au1000/pb1200/irqmap.c +++ b/arch/mips/alchemy/pb1200/irqmap.c diff --git a/arch/mips/au1000/pb1200/platform.c b/arch/mips/alchemy/pb1200/platform.c index f8fb0aeac571..f8fb0aeac571 100644 --- a/arch/mips/au1000/pb1200/platform.c +++ b/arch/mips/alchemy/pb1200/platform.c diff --git a/arch/mips/au1000/pb1500/Makefile b/arch/mips/alchemy/pb1500/Makefile index 602f38df20bb..602f38df20bb 100644 --- a/arch/mips/au1000/pb1500/Makefile +++ b/arch/mips/alchemy/pb1500/Makefile diff --git a/arch/mips/au1000/pb1500/board_setup.c b/arch/mips/alchemy/pb1500/board_setup.c index 035771c6e5b8..035771c6e5b8 100644 --- a/arch/mips/au1000/pb1500/board_setup.c +++ b/arch/mips/alchemy/pb1500/board_setup.c diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/alchemy/pb1500/init.c index 3b6e395cf952..3b6e395cf952 100644 --- a/arch/mips/au1000/pb1500/init.c +++ b/arch/mips/alchemy/pb1500/init.c diff --git a/arch/mips/au1000/pb1500/irqmap.c b/arch/mips/alchemy/pb1500/irqmap.c index 39c4682766a8..39c4682766a8 100644 --- a/arch/mips/au1000/pb1500/irqmap.c +++ b/arch/mips/alchemy/pb1500/irqmap.c diff --git a/arch/mips/au1000/pb1550/Makefile b/arch/mips/alchemy/pb1550/Makefile index 7d8beca87fa5..7d8beca87fa5 100644 --- a/arch/mips/au1000/pb1550/Makefile +++ b/arch/mips/alchemy/pb1550/Makefile diff --git a/arch/mips/au1000/pb1550/board_setup.c b/arch/mips/alchemy/pb1550/board_setup.c index 0ed76b64b6ab..0ed76b64b6ab 100644 --- a/arch/mips/au1000/pb1550/board_setup.c +++ b/arch/mips/alchemy/pb1550/board_setup.c diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/alchemy/pb1550/init.c index e1055a13a1a0..e1055a13a1a0 100644 --- a/arch/mips/au1000/pb1550/init.c +++ b/arch/mips/alchemy/pb1550/init.c diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/alchemy/pb1550/irqmap.c index a02a4d1fa899..a02a4d1fa899 100644 --- a/arch/mips/au1000/pb1550/irqmap.c +++ b/arch/mips/alchemy/pb1550/irqmap.c diff --git a/arch/mips/au1000/xxs1500/Makefile b/arch/mips/alchemy/xxs1500/Makefile index db3c526f64d8..db3c526f64d8 100644 --- a/arch/mips/au1000/xxs1500/Makefile +++ b/arch/mips/alchemy/xxs1500/Makefile diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c index 4c587acac5c3..4c587acac5c3 100644 --- a/arch/mips/au1000/xxs1500/board_setup.c +++ b/arch/mips/alchemy/xxs1500/board_setup.c diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c index 7516434760a1..7516434760a1 100644 --- a/arch/mips/au1000/xxs1500/init.c +++ b/arch/mips/alchemy/xxs1500/init.c diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/alchemy/xxs1500/irqmap.c index edf06ed11870..edf06ed11870 100644 --- a/arch/mips/au1000/xxs1500/irqmap.c +++ b/arch/mips/alchemy/xxs1500/irqmap.c diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild new file mode 100644 index 000000000000..7897f05e3165 --- /dev/null +++ b/arch/mips/include/asm/Kbuild @@ -0,0 +1,3 @@ +include include/asm-generic/Kbuild.asm + +header-y += cachectl.h sgidefs.h sysmips.h diff --git a/arch/mips/include/asm/a.out.h b/arch/mips/include/asm/a.out.h new file mode 100644 index 000000000000..cad8371422ab --- /dev/null +++ b/arch/mips/include/asm/a.out.h @@ -0,0 +1,35 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2003 by Ralf Baechle + */ +#ifndef _ASM_A_OUT_H +#define _ASM_A_OUT_H + +#ifdef __KERNEL__ + + +#endif + +struct exec +{ + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for + file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, + in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in + bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#endif /* _ASM_A_OUT_H */ diff --git a/arch/mips/include/asm/abi.h b/arch/mips/include/asm/abi.h new file mode 100644 index 000000000000..1dd74fbdc09b --- /dev/null +++ b/arch/mips/include/asm/abi.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005, 06 by Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2005 MIPS Technologies, Inc. + */ +#ifndef _ASM_ABI_H +#define _ASM_ABI_H + +#include <asm/signal.h> +#include <asm/siginfo.h> + +struct mips_abi { + int (* const setup_frame)(struct k_sigaction * ka, + struct pt_regs *regs, int signr, + sigset_t *set); + int (* const setup_rt_frame)(struct k_sigaction * ka, + struct pt_regs *regs, int signr, + sigset_t *set, siginfo_t *info); + const unsigned long restart; +}; + +#endif /* _ASM_ABI_H */ diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h new file mode 100644 index 000000000000..569f80aacbd2 --- /dev/null +++ b/arch/mips/include/asm/addrspace.h @@ -0,0 +1,154 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 99 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999 by Silicon Graphics, Inc. + */ +#ifndef _ASM_ADDRSPACE_H +#define _ASM_ADDRSPACE_H + +#include <spaces.h> + +/* + * Configure language + */ +#ifdef __ASSEMBLY__ +#define _ATYPE_ +#define _ATYPE32_ +#define _ATYPE64_ +#define _CONST64_(x) x +#else +#define _ATYPE_ __PTRDIFF_TYPE__ +#define _ATYPE32_ int +#define _ATYPE64_ __s64 +#ifdef CONFIG_64BIT +#define _CONST64_(x) x ## L +#else +#define _CONST64_(x) x ## LL +#endif +#endif + +/* + * 32-bit MIPS address spaces + */ +#ifdef __ASSEMBLY__ +#define _ACAST32_ +#define _ACAST64_ +#else +#define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */ +#define _ACAST64_ (_ATYPE64_) /* do _not_ narrow */ +#endif + +/* + * Returns the kernel segment base of a given address + */ +#define KSEGX(a) ((_ACAST32_ (a)) & 0xe0000000) + +/* + * Returns the physical address of a CKSEGx / XKPHYS address + */ +#define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff) +#define XPHYSADDR(a) ((_ACAST64_(a)) & \ + _CONST64_(0x000000ffffffffff)) + +#ifdef CONFIG_64BIT + +/* + * Memory segments (64bit kernel mode addresses) + * The compatibility segments use the full 64-bit sign extended value. Note + * the R8000 doesn't have them so don't reference these in generic MIPS code. + */ +#define XKUSEG _CONST64_(0x0000000000000000) +#define XKSSEG _CONST64_(0x4000000000000000) +#define XKPHYS _CONST64_(0x8000000000000000) +#define XKSEG _CONST64_(0xc000000000000000) +#define CKSEG0 _CONST64_(0xffffffff80000000) +#define CKSEG1 _CONST64_(0xffffffffa0000000) +#define CKSSEG _CONST64_(0xffffffffc0000000) +#define CKSEG3 _CONST64_(0xffffffffe0000000) + +#define CKSEG0ADDR(a) (CPHYSADDR(a) | CKSEG0) +#define CKSEG1ADDR(a) (CPHYSADDR(a) | CKSEG1) +#define CKSEG2ADDR(a) (CPHYSADDR(a) | CKSEG2) +#define CKSEG3ADDR(a) (CPHYSADDR(a) | CKSEG3) + +#else + +#define CKSEG0ADDR(a) (CPHYSADDR(a) | KSEG0) +#define CKSEG1ADDR(a) (CPHYSADDR(a) | KSEG1) +#define CKSEG2ADDR(a) (CPHYSADDR(a) | KSEG2) +#define CKSEG3ADDR(a) (CPHYSADDR(a) | KSEG3) + +/* + * Map an address to a certain kernel segment + */ +#define KSEG0ADDR(a) (CPHYSADDR(a) | KSEG0) +#define KSEG1ADDR(a) (CPHYSADDR(a) | KSEG1) +#define KSEG2ADDR(a) (CPHYSADDR(a) | KSEG2) +#define KSEG3ADDR(a) (CPHYSADDR(a) | KSEG3) + +/* + * Memory segments (32bit kernel mode addresses) + * These are the traditional names used in the 32-bit universe. + */ +#define KUSEG 0x00000000 +#define KSEG0 0x80000000 +#define KSEG1 0xa0000000 +#define KSEG2 0xc0000000 +#define KSEG3 0xe0000000 + +#define CKUSEG 0x00000000 +#define CKSEG0 0x80000000 +#define CKSEG1 0xa0000000 +#define CKSEG2 0xc0000000 +#define CKSEG3 0xe0000000 + +#endif + +/* + * Cache modes for XKPHYS address conversion macros + */ +#define K_CALG_COH_EXCL1_NOL2 0 +#define K_CALG_COH_SHRL1_NOL2 1 +#define K_CALG_UNCACHED 2 +#define K_CALG_NONCOHERENT 3 +#define K_CALG_COH_EXCL 4 +#define K_CALG_COH_SHAREABLE 5 +#define K_CALG_NOTUSED 6 +#define K_CALG_UNCACHED_ACCEL 7 + +/* + * 64-bit address conversions + */ +#define PHYS_TO_XKSEG_UNCACHED(p) PHYS_TO_XKPHYS(K_CALG_UNCACHED, (p)) +#define PHYS_TO_XKSEG_CACHED(p) PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p)) +#define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK) +#define PHYS_TO_XKPHYS(cm, a) (_CONST64_(0x8000000000000000) | \ + (_CONST64_(cm) << 59) | (a)) + +/* + * The ultimate limited of the 64-bit MIPS architecture: 2 bits for selecting + * the region, 3 bits for the CCA mode. This leaves 59 bits of which the + * R8000 implements most with its 48-bit physical address space. + */ +#define TO_PHYS_MASK _CONST64_(0x07ffffffffffffff) /* 2^^59 - 1 */ + +#ifndef CONFIG_CPU_R8000 + +/* + * The R8000 doesn't have the 32-bit compat spaces so we don't define them + * in order to catch bugs in the source code. + */ + +#define COMPAT_K1BASE32 _CONST64_(0xffffffffa0000000) +#define PHYS_TO_COMPATK1(x) ((x) | COMPAT_K1BASE32) /* 32-bit compat k1 */ + +#endif + +#define KDM_TO_PHYS(x) (_ACAST64_ (x) & TO_PHYS_MASK) +#define PHYS_TO_K0(x) (_ACAST64_ (x) | CAC_BASE) + +#endif /* _ASM_ADDRSPACE_H */ diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h new file mode 100644 index 000000000000..608cfcfbb3ea --- /dev/null +++ b/arch/mips/include/asm/asm.h @@ -0,0 +1,409 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle + * Copyright (C) 1999 by Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + * Copyright (C) 2002 Maciej W. Rozycki + * + * Some useful macros for MIPS assembler code + * + * Some of the routines below contain useless nops that will be optimized + * away by gas in -O mode. These nops are however required to fill delay + * slots in noreorder mode. + */ +#ifndef __ASM_ASM_H +#define __ASM_ASM_H + +#include <asm/sgidefs.h> + +#ifndef CAT +#ifdef __STDC__ +#define __CAT(str1, str2) str1##str2 +#else +#define __CAT(str1, str2) str1/**/str2 +#endif +#define CAT(str1, str2) __CAT(str1, str2) +#endif + +/* + * PIC specific declarations + * Not used for the kernel but here seems to be the right place. + */ +#ifdef __PIC__ +#define CPRESTORE(register) \ + .cprestore register +#define CPADD(register) \ + .cpadd register +#define CPLOAD(register) \ + .cpload register +#else +#define CPRESTORE(register) +#define CPADD(register) +#define CPLOAD(register) +#endif + +/* + * LEAF - declare leaf routine + */ +#define LEAF(symbol) \ + .globl symbol; \ + .align 2; \ + .type symbol, @function; \ + .ent symbol, 0; \ +symbol: .frame sp, 0, ra + +/* + * NESTED - declare nested routine entry point + */ +#define NESTED(symbol, framesize, rpc) \ + .globl symbol; \ + .align 2; \ + .type symbol, @function; \ + .ent symbol, 0; \ +symbol: .frame sp, framesize, rpc + +/* + * END - mark end of function + */ +#define END(function) \ + .end function; \ + .size function, .-function + +/* + * EXPORT - export definition of symbol + */ +#define EXPORT(symbol) \ + .globl symbol; \ +symbol: + +/* + * FEXPORT - export definition of a function symbol + */ +#define FEXPORT(symbol) \ + .globl symbol; \ + .type symbol, @function; \ +symbol: + +/* + * ABS - export absolute symbol + */ +#define ABS(symbol,value) \ + .globl symbol; \ +symbol = value + +#define PANIC(msg) \ + .set push; \ + .set reorder; \ + PTR_LA a0, 8f; \ + jal panic; \ +9: b 9b; \ + .set pop; \ + TEXT(msg) + +/* + * Print formatted string + */ +#ifdef CONFIG_PRINTK +#define PRINT(string) \ + .set push; \ + .set reorder; \ + PTR_LA a0, 8f; \ + jal printk; \ + .set pop; \ + TEXT(string) +#else +#define PRINT(string) +#endif + +#define TEXT(msg) \ + .pushsection .data; \ +8: .asciiz msg; \ + .popsection; + +/* + * Build text tables + */ +#define TTABLE(string) \ + .pushsection .text; \ + .word 1f; \ + .popsection \ + .pushsection .data; \ +1: .asciiz string; \ + .popsection + +/* + * MIPS IV pref instruction. + * Use with .set noreorder only! + * + * MIPS IV implementations are free to treat this as a nop. The R5000 + * is one of them. So we should have an option not to use this instruction. + */ +#ifdef CONFIG_CPU_HAS_PREFETCH + +#define PREF(hint,addr) \ + .set push; \ + .set mips4; \ + pref hint, addr; \ + .set pop + +#define PREFX(hint,addr) \ + .set push; \ + .set mips4; \ + prefx hint, addr; \ + .set pop + +#else /* !CONFIG_CPU_HAS_PREFETCH */ + +#define PREF(hint, addr) +#define PREFX(hint, addr) + +#endif /* !CONFIG_CPU_HAS_PREFETCH */ + +/* + * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs. + */ +#if (_MIPS_ISA == _MIPS_ISA_MIPS1) +#define MOVN(rd, rs, rt) \ + .set push; \ + .set reorder; \ + beqz rt, 9f; \ + move rd, rs; \ + .set pop; \ +9: +#define MOVZ(rd, rs, rt) \ + .set push; \ + .set reorder; \ + bnez rt, 9f; \ + move rd, rs; \ + .set pop; \ +9: +#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */ +#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) +#define MOVN(rd, rs, rt) \ + .set push; \ + .set noreorder; \ + bnezl rt, 9f; \ + move rd, rs; \ + .set pop; \ +9: +#define MOVZ(rd, rs, rt) \ + .set push; \ + .set noreorder; \ + beqzl rt, 9f; \ + move rd, rs; \ + .set pop; \ +9: +#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */ +#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64) +#define MOVN(rd, rs, rt) \ + movn rd, rs, rt +#define MOVZ(rd, rs, rt) \ + movz rd, rs, rt +#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */ + +/* + * Stack alignment + */ +#if (_MIPS_SIM == _MIPS_SIM_ABI32) +#define ALSZ 7 +#define ALMASK ~7 +#endif +#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) +#define ALSZ 15 +#define ALMASK ~15 +#endif + +/* + * Macros to handle different pointer/register sizes for 32/64-bit code + */ + +/* + * Size of a register + */ +#ifdef __mips64 +#define SZREG 8 +#else +#define SZREG 4 +#endif + +/* + * Use the following macros in assemblercode to load/store registers, + * pointers etc. + */ +#if (_MIPS_SIM == _MIPS_SIM_ABI32) +#define REG_S sw +#define REG_L lw +#define REG_SUBU subu +#define REG_ADDU addu +#endif +#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) +#define REG_S sd +#define REG_L ld +#define REG_SUBU dsubu +#define REG_ADDU daddu +#endif + +/* + * How to add/sub/load/store/shift C int variables. + */ +#if (_MIPS_SZINT == 32) +#define INT_ADD add +#define INT_ADDU addu +#define INT_ADDI addi +#define INT_ADDIU addiu +#define INT_SUB sub +#define INT_SUBU subu +#define INT_L lw +#define INT_S sw +#define INT_SLL sll +#define INT_SLLV sllv +#define INT_SRL srl +#define INT_SRLV srlv +#define INT_SRA sra +#define INT_SRAV srav +#endif + +#if (_MIPS_SZINT == 64) +#define INT_ADD dadd +#define INT_ADDU daddu +#define INT_ADDI daddi +#define INT_ADDIU daddiu +#define INT_SUB dsub +#define INT_SUBU dsubu +#define INT_L ld +#define INT_S sd +#define INT_SLL dsll +#define INT_SLLV dsllv +#define INT_SRL dsrl +#define INT_SRLV dsrlv +#define INT_SRA dsra +#define INT_SRAV dsrav +#endif + +/* + * How to add/sub/load/store/shift C long variables. + */ +#if (_MIPS_SZLONG == 32) +#define LONG_ADD add +#define LONG_ADDU addu +#define LONG_ADDI addi +#define LONG_ADDIU addiu +#define LONG_SUB sub +#define LONG_SUBU subu +#define LONG_L lw +#define LONG_S sw +#define LONG_SLL sll +#define LONG_SLLV sllv +#define LONG_SRL srl +#define LONG_SRLV srlv +#define LONG_SRA sra +#define LONG_SRAV srav + +#define LONG .word +#define LONGSIZE 4 +#define LONGMASK 3 +#define LONGLOG 2 +#endif + +#if (_MIPS_SZLONG == 64) +#define LONG_ADD dadd +#define LONG_ADDU daddu +#define LONG_ADDI daddi +#define LONG_ADDIU daddiu +#define LONG_SUB dsub +#define LONG_SUBU dsubu +#define LONG_L ld +#define LONG_S sd +#define LONG_SLL dsll +#define LONG_SLLV dsllv +#define LONG_SRL dsrl +#define LONG_SRLV dsrlv +#define LONG_SRA dsra +#define LONG_SRAV dsrav + +#define LONG .dword +#define LONGSIZE 8 +#define LONGMASK 7 +#define LONGLOG 3 +#endif + +/* + * How to add/sub/load/store/shift pointers. + */ +#if (_MIPS_SZPTR == 32) +#define PTR_ADD add +#define PTR_ADDU addu +#define PTR_ADDI addi +#define PTR_ADDIU addiu +#define PTR_SUB sub +#define PTR_SUBU subu +#define PTR_L lw +#define PTR_S sw +#define PTR_LA la +#define PTR_LI li +#define PTR_SLL sll +#define PTR_SLLV sllv +#define PTR_SRL srl +#define PTR_SRLV srlv +#define PTR_SRA sra +#define PTR_SRAV srav + +#define PTR_SCALESHIFT 2 + +#define PTR .word +#define PTRSIZE 4 +#define PTRLOG 2 +#endif + +#if (_MIPS_SZPTR == 64) +#define PTR_ADD dadd +#define PTR_ADDU daddu +#define PTR_ADDI daddi +#define PTR_ADDIU daddiu +#define PTR_SUB dsub +#define PTR_SUBU dsubu +#define PTR_L ld +#define PTR_S sd +#define PTR_LA dla +#define PTR_LI dli +#define PTR_SLL dsll +#define PTR_SLLV dsllv +#define PTR_SRL dsrl +#define PTR_SRLV dsrlv +#define PTR_SRA dsra +#define PTR_SRAV dsrav + +#define PTR_SCALESHIFT 3 + +#define PTR .dword +#define PTRSIZE 8 +#define PTRLOG 3 +#endif + +/* + * Some cp0 registers were extended to 64bit for MIPS III. + */ +#if (_MIPS_SIM == _MIPS_SIM_ABI32) +#define MFC0 mfc0 +#define MTC0 mtc0 +#endif +#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) +#define MFC0 dmfc0 +#define MTC0 dmtc0 +#endif + +#define SSNOP sll zero, zero, 1 + +#ifdef CONFIG_SGI_IP28 +/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */ +#include <asm/cacheops.h> +#define R10KCBARRIER(addr) cache Cache_Barrier, addr; +#else +#define R10KCBARRIER(addr) +#endif + +#endif /* __ASM_ASM_H */ diff --git a/arch/mips/include/asm/asmmacro-32.h b/arch/mips/include/asm/asmmacro-32.h new file mode 100644 index 000000000000..5de3963f511e --- /dev/null +++ b/arch/mips/include/asm/asmmacro-32.h @@ -0,0 +1,158 @@ +/* + * asmmacro.h: Assembler macros to make things easier to read. + * + * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 1998, 1999, 2003 Ralf Baechle + */ +#ifndef _ASM_ASMMACRO_32_H +#define _ASM_ASMMACRO_32_H + +#include <asm/asm-offsets.h> +#include <asm/regdef.h> +#include <asm/fpregdef.h> +#include <asm/mipsregs.h> + + .macro fpu_save_double thread status tmp1=t0 + cfc1 \tmp1, fcr31 + sdc1 $f0, THREAD_FPR0(\thread) + sdc1 $f2, THREAD_FPR2(\thread) + sdc1 $f4, THREAD_FPR4(\thread) + sdc1 $f6, THREAD_FPR6(\thread) + sdc1 $f8, THREAD_FPR8(\thread) + sdc1 $f10, THREAD_FPR10(\thread) + sdc1 $f12, THREAD_FPR12(\thread) + sdc1 $f14, THREAD_FPR14(\thread) + sdc1 $f16, THREAD_FPR16(\thread) + sdc1 $f18, THREAD_FPR18(\thread) + sdc1 $f20, THREAD_FPR20(\thread) + sdc1 $f22, THREAD_FPR22(\thread) + sdc1 $f24, THREAD_FPR24(\thread) + sdc1 $f26, THREAD_FPR26(\thread) + sdc1 $f28, THREAD_FPR28(\thread) + sdc1 $f30, THREAD_FPR30(\thread) + sw \tmp1, THREAD_FCR31(\thread) + .endm + + .macro fpu_save_single thread tmp=t0 + cfc1 \tmp, fcr31 + swc1 $f0, THREAD_FPR0(\thread) + swc1 $f1, THREAD_FPR1(\thread) + swc1 $f2, THREAD_FPR2(\thread) + swc1 $f3, THREAD_FPR3(\thread) + swc1 $f4, THREAD_FPR4(\thread) + swc1 $f5, THREAD_FPR5(\thread) + swc1 $f6, THREAD_FPR6(\thread) + swc1 $f7, THREAD_FPR7(\thread) + swc1 $f8, THREAD_FPR8(\thread) + swc1 $f9, THREAD_FPR9(\thread) + swc1 $f10, THREAD_FPR10(\thread) + swc1 $f11, THREAD_FPR11(\thread) + swc1 $f12, THREAD_FPR12(\thread) + swc1 $f13, THREAD_FPR13(\thread) + swc1 $f14, THREAD_FPR14(\thread) + swc1 $f15, THREAD_FPR15(\thread) + swc1 $f16, THREAD_FPR16(\thread) + swc1 $f17, THREAD_FPR17(\thread) + swc1 $f18, THREAD_FPR18(\thread) + swc1 $f19, THREAD_FPR19(\thread) + swc1 $f20, THREAD_FPR20(\thread) + swc1 $f21, THREAD_FPR21(\thread) + swc1 $f22, THREAD_FPR22(\thread) + swc1 $f23, THREAD_FPR23(\thread) + swc1 $f24, THREAD_FPR24(\thread) + swc1 $f25, THREAD_FPR25(\thread) + swc1 $f26, THREAD_FPR26(\thread) + swc1 $f27, THREAD_FPR27(\thread) + swc1 $f28, THREAD_FPR28(\thread) + swc1 $f29, THREAD_FPR29(\thread) + swc1 $f30, THREAD_FPR30(\thread) + swc1 $f31, THREAD_FPR31(\thread) + sw \tmp, THREAD_FCR31(\thread) + .endm + + .macro fpu_restore_double thread status tmp=t0 + lw \tmp, THREAD_FCR31(\thread) + ldc1 $f0, THREAD_FPR0(\thread) + ldc1 $f2, THREAD_FPR2(\thread) + ldc1 $f4, THREAD_FPR4(\thread) + ldc1 $f6, THREAD_FPR6(\thread) + ldc1 $f8, THREAD_FPR8(\thread) + ldc1 $f10, THREAD_FPR10(\thread) + ldc1 $f12, THREAD_FPR12(\thread) + ldc1 $f14, THREAD_FPR14(\thread) + ldc1 $f16, THREAD_FPR16(\thread) + ldc1 $f18, THREAD_FPR18(\thread) + ldc1 $f20, THREAD_FPR20(\thread) + ldc1 $f22, THREAD_FPR22(\thread) + ldc1 $f24, THREAD_FPR24(\thread) + ldc1 $f26, THREAD_FPR26(\thread) + ldc1 $f28, THREAD_FPR28(\thread) + ldc1 $f30, THREAD_FPR30(\thread) + ctc1 \tmp, fcr31 + .endm + + .macro fpu_restore_single thread tmp=t0 + lw \tmp, THREAD_FCR31(\thread) + lwc1 $f0, THREAD_FPR0(\thread) + lwc1 $f1, THREAD_FPR1(\thread) + lwc1 $f2, THREAD_FPR2(\thread) + lwc1 $f3, THREAD_FPR3(\thread) + lwc1 $f4, THREAD_FPR4(\thread) + lwc1 $f5, THREAD_FPR5(\thread) + lwc1 $f6, THREAD_FPR6(\thread) + lwc1 $f7, THREAD_FPR7(\thread) + lwc1 $f8, THREAD_FPR8(\thread) + lwc1 $f9, THREAD_FPR9(\thread) + lwc1 $f10, THREAD_FPR10(\thread) + lwc1 $f11, THREAD_FPR11(\thread) + lwc1 $f12, THREAD_FPR12(\thread) + lwc1 $f13, THREAD_FPR13(\thread) + lwc1 $f14, THREAD_FPR14(\thread) + lwc1 $f15, THREAD_FPR15(\thread) + lwc1 $f16, THREAD_FPR16(\thread) + lwc1 $f17, THREAD_FPR17(\thread) + lwc1 $f18, THREAD_FPR18(\thread) + lwc1 $f19, THREAD_FPR19(\thread) + lwc1 $f20, THREAD_FPR20(\thread) + lwc1 $f21, THREAD_FPR21(\thread) + lwc1 $f22, THREAD_FPR22(\thread) + lwc1 $f23, THREAD_FPR23(\thread) + lwc1 $f24, THREAD_FPR24(\thread) + lwc1 $f25, THREAD_FPR25(\thread) + lwc1 $f26, THREAD_FPR26(\thread) + lwc1 $f27, THREAD_FPR27(\thread) + lwc1 $f28, THREAD_FPR28(\thread) + lwc1 $f29, THREAD_FPR29(\thread) + lwc1 $f30, THREAD_FPR30(\thread) + lwc1 $f31, THREAD_FPR31(\thread) + ctc1 \tmp, fcr31 + .endm + + .macro cpu_save_nonscratch thread + LONG_S s0, THREAD_REG16(\thread) + LONG_S s1, THREAD_REG17(\thread) + LONG_S s2, THREAD_REG18(\thread) + LONG_S s3, THREAD_REG19(\thread) + LONG_S s4, THREAD_REG20(\thread) + LONG_S s5, THREAD_REG21(\thread) + LONG_S s6, THREAD_REG22(\thread) + LONG_S s7, THREAD_REG23(\thread) + LONG_S sp, THREAD_REG29(\thread) + LONG_S fp, THREAD_REG30(\thread) + .endm + + .macro cpu_restore_nonscratch thread + LONG_L s0, THREAD_REG16(\thread) + LONG_L s1, THREAD_REG17(\thread) + LONG_L s2, THREAD_REG18(\thread) + LONG_L s3, THREAD_REG19(\thread) + LONG_L s4, THREAD_REG20(\thread) + LONG_L s5, THREAD_REG21(\thread) + LONG_L s6, THREAD_REG22(\thread) + LONG_L s7, THREAD_REG23(\thread) + LONG_L sp, THREAD_REG29(\thread) + LONG_L fp, THREAD_REG30(\thread) + LONG_L ra, THREAD_REG31(\thread) + .endm + +#endif /* _ASM_ASMMACRO_32_H */ diff --git a/arch/mips/include/asm/asmmacro-64.h b/arch/mips/include/asm/asmmacro-64.h new file mode 100644 index 000000000000..225feefcb25d --- /dev/null +++ b/arch/mips/include/asm/asmmacro-64.h @@ -0,0 +1,139 @@ +/* + * asmmacro.h: Assembler macros to make things easier to read. + * + * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 1998, 1999 Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_ASMMACRO_64_H +#define _ASM_ASMMACRO_64_H + +#include <asm/asm-offsets.h> +#include <asm/regdef.h> +#include <asm/fpregdef.h> +#include <asm/mipsregs.h> + + .macro fpu_save_16even thread tmp=t0 + cfc1 \tmp, fcr31 + sdc1 $f0, THREAD_FPR0(\thread) + sdc1 $f2, THREAD_FPR2(\thread) + sdc1 $f4, THREAD_FPR4(\thread) + sdc1 $f6, THREAD_FPR6(\thread) + sdc1 $f8, THREAD_FPR8(\thread) + sdc1 $f10, THREAD_FPR10(\thread) + sdc1 $f12, THREAD_FPR12(\thread) + sdc1 $f14, THREAD_FPR14(\thread) + sdc1 $f16, THREAD_FPR16(\thread) + sdc1 $f18, THREAD_FPR18(\thread) + sdc1 $f20, THREAD_FPR20(\thread) + sdc1 $f22, THREAD_FPR22(\thread) + sdc1 $f24, THREAD_FPR24(\thread) + sdc1 $f26, THREAD_FPR26(\thread) + sdc1 $f28, THREAD_FPR28(\thread) + sdc1 $f30, THREAD_FPR30(\thread) + sw \tmp, THREAD_FCR31(\thread) + .endm + + .macro fpu_save_16odd thread + sdc1 $f1, THREAD_FPR1(\thread) + sdc1 $f3, THREAD_FPR3(\thread) + sdc1 $f5, THREAD_FPR5(\thread) + sdc1 $f7, THREAD_FPR7(\thread) + sdc1 $f9, THREAD_FPR9(\thread) + sdc1 $f11, THREAD_FPR11(\thread) + sdc1 $f13, THREAD_FPR13(\thread) + sdc1 $f15, THREAD_FPR15(\thread) + sdc1 $f17, THREAD_FPR17(\thread) + sdc1 $f19, THREAD_FPR19(\thread) + sdc1 $f21, THREAD_FPR21(\thread) + sdc1 $f23, THREAD_FPR23(\thread) + sdc1 $f25, THREAD_FPR25(\thread) + sdc1 $f27, THREAD_FPR27(\thread) + sdc1 $f29, THREAD_FPR29(\thread) + sdc1 $f31, THREAD_FPR31(\thread) + .endm + + .macro fpu_save_double thread status tmp + sll \tmp, \status, 5 + bgez \tmp, 2f + fpu_save_16odd \thread +2: + fpu_save_16even \thread \tmp + .endm + + .macro fpu_restore_16even thread tmp=t0 + lw \tmp, THREAD_FCR31(\thread) + ldc1 $f0, THREAD_FPR0(\thread) + ldc1 $f2, THREAD_FPR2(\thread) + ldc1 $f4, THREAD_FPR4(\thread) + ldc1 $f6, THREAD_FPR6(\thread) + ldc1 $f8, THREAD_FPR8(\thread) + ldc1 $f10, THREAD_FPR10(\thread) + ldc1 $f12, THREAD_FPR12(\thread) + ldc1 $f14, THREAD_FPR14(\thread) + ldc1 $f16, THREAD_FPR16(\thread) + ldc1 $f18, THREAD_FPR18(\thread) + ldc1 $f20, THREAD_FPR20(\thread) + ldc1 $f22, THREAD_FPR22(\thread) + ldc1 $f24, THREAD_FPR24(\thread) + ldc1 $f26, THREAD_FPR26(\thread) + ldc1 $f28, THREAD_FPR28(\thread) + ldc1 $f30, THREAD_FPR30(\thread) + ctc1 \tmp, fcr31 + .endm + + .macro fpu_restore_16odd thread + ldc1 $f1, THREAD_FPR1(\thread) + ldc1 $f3, THREAD_FPR3(\thread) + ldc1 $f5, THREAD_FPR5(\thread) + ldc1 $f7, THREAD_FPR7(\thread) + ldc1 $f9, THREAD_FPR9(\thread) + ldc1 $f11, THREAD_FPR11(\thread) + ldc1 $f13, THREAD_FPR13(\thread) + ldc1 $f15, THREAD_FPR15(\thread) + ldc1 $f17, THREAD_FPR17(\thread) + ldc1 $f19, THREAD_FPR19(\thread) + ldc1 $f21, THREAD_FPR21(\thread) + ldc1 $f23, THREAD_FPR23(\thread) + ldc1 $f25, THREAD_FPR25(\thread) + ldc1 $f27, THREAD_FPR27(\thread) + ldc1 $f29, THREAD_FPR29(\thread) + ldc1 $f31, THREAD_FPR31(\thread) + .endm + + .macro fpu_restore_double thread status tmp + sll \tmp, \status, 5 + bgez \tmp, 1f # 16 register mode? + + fpu_restore_16odd \thread +1: fpu_restore_16even \thread \tmp + .endm + + .macro cpu_save_nonscratch thread + LONG_S s0, THREAD_REG16(\thread) + LONG_S s1, THREAD_REG17(\thread) + LONG_S s2, THREAD_REG18(\thread) + LONG_S s3, THREAD_REG19(\thread) + LONG_S s4, THREAD_REG20(\thread) + LONG_S s5, THREAD_REG21(\thread) + LONG_S s6, THREAD_REG22(\thread) + LONG_S s7, THREAD_REG23(\thread) + LONG_S sp, THREAD_REG29(\thread) + LONG_S fp, THREAD_REG30(\thread) + .endm + + .macro cpu_restore_nonscratch thread + LONG_L s0, THREAD_REG16(\thread) + LONG_L s1, THREAD_REG17(\thread) + LONG_L s2, THREAD_REG18(\thread) + LONG_L s3, THREAD_REG19(\thread) + LONG_L s4, THREAD_REG20(\thread) + LONG_L s5, THREAD_REG21(\thread) + LONG_L s6, THREAD_REG22(\thread) + LONG_L s7, THREAD_REG23(\thread) + LONG_L sp, THREAD_REG29(\thread) + LONG_L fp, THREAD_REG30(\thread) + LONG_L ra, THREAD_REG31(\thread) + .endm + +#endif /* _ASM_ASMMACRO_64_H */ diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h new file mode 100644 index 000000000000..7a881755800f --- /dev/null +++ b/arch/mips/include/asm/asmmacro.h @@ -0,0 +1,82 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Ralf Baechle + */ +#ifndef _ASM_ASMMACRO_H +#define _ASM_ASMMACRO_H + +#include <asm/hazards.h> + +#ifdef CONFIG_32BIT +#include <asm/asmmacro-32.h> +#endif +#ifdef CONFIG_64BIT +#include <asm/asmmacro-64.h> +#endif +#ifdef CONFIG_MIPS_MT_SMTC +#include <asm/mipsmtregs.h> +#endif + +#ifdef CONFIG_MIPS_MT_SMTC + .macro local_irq_enable reg=t0 + mfc0 \reg, CP0_TCSTATUS + ori \reg, \reg, TCSTATUS_IXMT + xori \reg, \reg, TCSTATUS_IXMT + mtc0 \reg, CP0_TCSTATUS + _ehb + .endm + + .macro local_irq_disable reg=t0 + mfc0 \reg, CP0_TCSTATUS + ori \reg, \reg, TCSTATUS_IXMT + mtc0 \reg, CP0_TCSTATUS + _ehb + .endm +#else + .macro local_irq_enable reg=t0 + mfc0 \reg, CP0_STATUS + ori \reg, \reg, 1 + mtc0 \reg, CP0_STATUS + irq_enable_hazard + .endm + + .macro local_irq_disable reg=t0 + mfc0 \reg, CP0_STATUS + ori \reg, \reg, 1 + xori \reg, \reg, 1 + mtc0 \reg, CP0_STATUS + irq_disable_hazard + .endm +#endif /* CONFIG_MIPS_MT_SMTC */ + +/* + * Temporary until all gas have MT ASE support + */ + .macro DMT reg=0 + .word 0x41600bc1 | (\reg << 16) + .endm + + .macro EMT reg=0 + .word 0x41600be1 | (\reg << 16) + .endm + + .macro DVPE reg=0 + .word 0x41600001 | (\reg << 16) + .endm + + .macro EVPE reg=0 + .word 0x41600021 | (\reg << 16) + .endm + + .macro MFTR rt=0, rd=0, u=0, sel=0 + .word 0x41000000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel) + .endm + + .macro MTTR rt=0, rd=0, u=0, sel=0 + .word 0x41800000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel) + .endm + +#endif /* _ASM_ASMMACRO_H */ diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h new file mode 100644 index 000000000000..1232be3885b0 --- /dev/null +++ b/arch/mips/include/asm/atomic.h @@ -0,0 +1,801 @@ +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + * + * But use these as seldom as possible since they are much more slower + * than regular operations. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 97, 99, 2000, 03, 04, 06 by Ralf Baechle + */ +#ifndef _ASM_ATOMIC_H +#define _ASM_ATOMIC_H + +#include <linux/irqflags.h> +#include <asm/barrier.h> +#include <asm/cpu-features.h> +#include <asm/war.h> +#include <asm/system.h> + +typedef struct { volatile int counter; } atomic_t; + +#define ATOMIC_INIT(i) { (i) } + +/* + * atomic_read - read atomic variable + * @v: pointer of type atomic_t + * + * Atomically reads the value of @v. + */ +#define atomic_read(v) ((v)->counter) + +/* + * atomic_set - set atomic variable + * @v: pointer of type atomic_t + * @i: required value + * + * Atomically sets the value of @v to @i. + */ +#define atomic_set(v, i) ((v)->counter = (i)) + +/* + * atomic_add - add integer to atomic variable + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v. + */ +static __inline__ void atomic_add(int i, atomic_t * v) +{ + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %0, %1 # atomic_add \n" + " addu %0, %2 \n" + " sc %0, %1 \n" + " beqzl %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %0, %1 # atomic_add \n" + " addu %0, %2 \n" + " sc %0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + v->counter += i; + raw_local_irq_restore(flags); + } +} + +/* + * atomic_sub - subtract the atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v. + */ +static __inline__ void atomic_sub(int i, atomic_t * v) +{ + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %0, %1 # atomic_sub \n" + " subu %0, %2 \n" + " sc %0, %1 \n" + " beqzl %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %0, %1 # atomic_sub \n" + " subu %0, %2 \n" + " sc %0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + v->counter -= i; + raw_local_irq_restore(flags); + } +} + +/* + * Same as above, but return the result value + */ +static __inline__ int atomic_add_return(int i, atomic_t * v) +{ + unsigned long result; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %1, %2 # atomic_add_return \n" + " addu %0, %1, %3 \n" + " sc %0, %2 \n" + " beqzl %0, 1b \n" + " addu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %1, %2 # atomic_add_return \n" + " addu %0, %1, %3 \n" + " sc %0, %2 \n" + " beqz %0, 2f \n" + " addu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + result = v->counter; + result += i; + v->counter = result; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return result; +} + +static __inline__ int atomic_sub_return(int i, atomic_t * v) +{ + unsigned long result; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %1, %2 # atomic_sub_return \n" + " subu %0, %1, %3 \n" + " sc %0, %2 \n" + " beqzl %0, 1b \n" + " subu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %1, %2 # atomic_sub_return \n" + " subu %0, %1, %3 \n" + " sc %0, %2 \n" + " beqz %0, 2f \n" + " subu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + result = v->counter; + result -= i; + v->counter = result; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return result; +} + +/* + * atomic_sub_if_positive - conditionally subtract integer from atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically test @v and subtract @i if @v is greater or equal than @i. + * The function returns the old value of @v minus @i. + */ +static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) +{ + unsigned long result; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %1, %2 # atomic_sub_if_positive\n" + " subu %0, %1, %3 \n" + " bltz %0, 1f \n" + " sc %0, %2 \n" + " .set noreorder \n" + " beqzl %0, 1b \n" + " subu %0, %1, %3 \n" + " .set reorder \n" + "1: \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %1, %2 # atomic_sub_if_positive\n" + " subu %0, %1, %3 \n" + " bltz %0, 1f \n" + " sc %0, %2 \n" + " .set noreorder \n" + " beqz %0, 2f \n" + " subu %0, %1, %3 \n" + " .set reorder \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + "1: \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + result = v->counter; + result -= i; + if (result >= 0) + v->counter = result; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return result; +} + +#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) +#define atomic_xchg(v, new) (xchg(&((v)->counter), (new))) + +/** + * atomic_add_unless - add unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + c = atomic_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +#define atomic_dec_return(v) atomic_sub_return(1, (v)) +#define atomic_inc_return(v) atomic_add_return(1, (v)) + +/* + * atomic_sub_and_test - subtract value from variable and test result + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v and returns + * true if the result is zero, or false for all + * other cases. + */ +#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) + +/* + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) + +/* + * atomic_dec_and_test - decrement by 1 and test + * @v: pointer of type atomic_t + * + * Atomically decrements @v by 1 and + * returns true if the result is 0, or false for all other + * cases. + */ +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) + +/* + * atomic_dec_if_positive - decrement by 1 if old value positive + * @v: pointer of type atomic_t + */ +#define atomic_dec_if_positive(v) atomic_sub_if_positive(1, v) + +/* + * atomic_inc - increment atomic variable + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1. + */ +#define atomic_inc(v) atomic_add(1, (v)) + +/* + * atomic_dec - decrement and test + * @v: pointer of type atomic_t + * + * Atomically decrements @v by 1. + */ +#define atomic_dec(v) atomic_sub(1, (v)) + +/* + * atomic_add_negative - add and test if negative + * @v: pointer of type atomic_t + * @i: integer value to add + * + * Atomically adds @i to @v and returns true + * if the result is negative, or false when + * result is greater than or equal to zero. + */ +#define atomic_add_negative(i, v) (atomic_add_return(i, (v)) < 0) + +#ifdef CONFIG_64BIT + +typedef struct { volatile long counter; } atomic64_t; + +#define ATOMIC64_INIT(i) { (i) } + +/* + * atomic64_read - read atomic variable + * @v: pointer of type atomic64_t + * + */ +#define atomic64_read(v) ((v)->counter) + +/* + * atomic64_set - set atomic variable + * @v: pointer of type atomic64_t + * @i: required value + */ +#define atomic64_set(v, i) ((v)->counter = (i)) + +/* + * atomic64_add - add integer to atomic variable + * @i: integer value to add + * @v: pointer of type atomic64_t + * + * Atomically adds @i to @v. + */ +static __inline__ void atomic64_add(long i, atomic64_t * v) +{ + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %0, %1 # atomic64_add \n" + " addu %0, %2 \n" + " scd %0, %1 \n" + " beqzl %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %0, %1 # atomic64_add \n" + " addu %0, %2 \n" + " scd %0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + v->counter += i; + raw_local_irq_restore(flags); + } +} + +/* + * atomic64_sub - subtract the atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic64_t + * + * Atomically subtracts @i from @v. + */ +static __inline__ void atomic64_sub(long i, atomic64_t * v) +{ + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %0, %1 # atomic64_sub \n" + " subu %0, %2 \n" + " scd %0, %1 \n" + " beqzl %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %0, %1 # atomic64_sub \n" + " subu %0, %2 \n" + " scd %0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + v->counter -= i; + raw_local_irq_restore(flags); + } +} + +/* + * Same as above, but return the result value + */ +static __inline__ long atomic64_add_return(long i, atomic64_t * v) +{ + unsigned long result; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %1, %2 # atomic64_add_return \n" + " addu %0, %1, %3 \n" + " scd %0, %2 \n" + " beqzl %0, 1b \n" + " addu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %1, %2 # atomic64_add_return \n" + " addu %0, %1, %3 \n" + " scd %0, %2 \n" + " beqz %0, 2f \n" + " addu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + result = v->counter; + result += i; + v->counter = result; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return result; +} + +static __inline__ long atomic64_sub_return(long i, atomic64_t * v) +{ + unsigned long result; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %1, %2 # atomic64_sub_return \n" + " subu %0, %1, %3 \n" + " scd %0, %2 \n" + " beqzl %0, 1b \n" + " subu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %1, %2 # atomic64_sub_return \n" + " subu %0, %1, %3 \n" + " scd %0, %2 \n" + " beqz %0, 2f \n" + " subu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + result = v->counter; + result -= i; + v->counter = result; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return result; +} + +/* + * atomic64_sub_if_positive - conditionally subtract integer from atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic64_t + * + * Atomically test @v and subtract @i if @v is greater or equal than @i. + * The function returns the old value of @v minus @i. + */ +static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) +{ + unsigned long result; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %1, %2 # atomic64_sub_if_positive\n" + " dsubu %0, %1, %3 \n" + " bltz %0, 1f \n" + " scd %0, %2 \n" + " .set noreorder \n" + " beqzl %0, 1b \n" + " dsubu %0, %1, %3 \n" + " .set reorder \n" + "1: \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %1, %2 # atomic64_sub_if_positive\n" + " dsubu %0, %1, %3 \n" + " bltz %0, 1f \n" + " scd %0, %2 \n" + " .set noreorder \n" + " beqz %0, 2f \n" + " dsubu %0, %1, %3 \n" + " .set reorder \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + "1: \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + result = v->counter; + result -= i; + if (result >= 0) + v->counter = result; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return result; +} + +#define atomic64_cmpxchg(v, o, n) \ + ((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n))) +#define atomic64_xchg(v, new) (xchg(&((v)->counter), (new))) + +/** + * atomic64_add_unless - add unless the number is a given value + * @v: pointer of type atomic64_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) +{ + long c, old; + c = atomic64_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic64_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) + +#define atomic64_dec_return(v) atomic64_sub_return(1, (v)) +#define atomic64_inc_return(v) atomic64_add_return(1, (v)) + +/* + * atomic64_sub_and_test - subtract value from variable and test result + * @i: integer value to subtract + * @v: pointer of type atomic64_t + * + * Atomically subtracts @i from @v and returns + * true if the result is zero, or false for all + * other cases. + */ +#define atomic64_sub_and_test(i, v) (atomic64_sub_return((i), (v)) == 0) + +/* + * atomic64_inc_and_test - increment and test + * @v: pointer of type atomic64_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0) + +/* + * atomic64_dec_and_test - decrement by 1 and test + * @v: pointer of type atomic64_t + * + * Atomically decrements @v by 1 and + * returns true if the result is 0, or false for all other + * cases. + */ +#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0) + +/* + * atomic64_dec_if_positive - decrement by 1 if old value positive + * @v: pointer of type atomic64_t + */ +#define atomic64_dec_if_positive(v) atomic64_sub_if_positive(1, v) + +/* + * atomic64_inc - increment atomic variable + * @v: pointer of type atomic64_t + * + * Atomically increments @v by 1. + */ +#define atomic64_inc(v) atomic64_add(1, (v)) + +/* + * atomic64_dec - decrement and test + * @v: pointer of type atomic64_t + * + * Atomically decrements @v by 1. + */ +#define atomic64_dec(v) atomic64_sub(1, (v)) + +/* + * atomic64_add_negative - add and test if negative + * @v: pointer of type atomic64_t + * @i: integer value to add + * + * Atomically adds @i to @v and returns true + * if the result is negative, or false when + * result is greater than or equal to zero. + */ +#define atomic64_add_negative(i, v) (atomic64_add_return(i, (v)) < 0) + +#endif /* CONFIG_64BIT */ + +/* + * atomic*_return operations are serializing but not the non-*_return + * versions. + */ +#define smp_mb__before_atomic_dec() smp_llsc_mb() +#define smp_mb__after_atomic_dec() smp_llsc_mb() +#define smp_mb__before_atomic_inc() smp_llsc_mb() +#define smp_mb__after_atomic_inc() smp_llsc_mb() + +#include <asm-generic/atomic.h> + +#endif /* _ASM_ATOMIC_H */ diff --git a/arch/mips/include/asm/auxvec.h b/arch/mips/include/asm/auxvec.h new file mode 100644 index 000000000000..7cf7f2d21943 --- /dev/null +++ b/arch/mips/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef _ASM_AUXVEC_H +#define _ASM_AUXVEC_H + +#endif /* _ASM_AUXVEC_H */ diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h new file mode 100644 index 000000000000..8e9ac313ca3b --- /dev/null +++ b/arch/mips/include/asm/barrier.h @@ -0,0 +1,155 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 by Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_BARRIER_H +#define __ASM_BARRIER_H + +/* + * read_barrier_depends - Flush all pending reads that subsequents reads + * depend on. + * + * No data-dependent reads from memory-like regions are ever reordered + * over this barrier. All reads preceding this primitive are guaranteed + * to access memory (but not necessarily other CPUs' caches) before any + * reads following this primitive that depend on the data return by + * any of the preceding reads. This primitive is much lighter weight than + * rmb() on most CPUs, and is never heavier weight than is + * rmb(). + * + * These ordering constraints are respected by both the local CPU + * and the compiler. + * + * Ordering is not guaranteed by anything other than these primitives, + * not even by data dependencies. See the documentation for + * memory_barrier() for examples and URLs to more information. + * + * For example, the following code would force ordering (the initial + * value of "a" is zero, "b" is one, and "p" is "&a"): + * + * <programlisting> + * CPU 0 CPU 1 + * + * b = 2; + * memory_barrier(); + * p = &b; q = p; + * read_barrier_depends(); + * d = *q; + * </programlisting> + * + * because the read of "*q" depends on the read of "p" and these + * two reads are separated by a read_barrier_depends(). However, + * the following code, with the same initial values for "a" and "b": + * + * <programlisting> + * CPU 0 CPU 1 + * + * a = 2; + * memory_barrier(); + * b = 3; y = b; + * read_barrier_depends(); + * x = a; + * </programlisting> + * + * does not enforce ordering, since there is no data dependency between + * the read of "a" and the read of "b". Therefore, on some CPUs, such + * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() + * in cases like this where there are no data dependencies. + */ + +#define read_barrier_depends() do { } while(0) +#define smp_read_barrier_depends() do { } while(0) + +#ifdef CONFIG_CPU_HAS_SYNC +#define __sync() \ + __asm__ __volatile__( \ + ".set push\n\t" \ + ".set noreorder\n\t" \ + ".set mips2\n\t" \ + "sync\n\t" \ + ".set pop" \ + : /* no output */ \ + : /* no input */ \ + : "memory") +#else +#define __sync() do { } while(0) +#endif + +#define __fast_iob() \ + __asm__ __volatile__( \ + ".set push\n\t" \ + ".set noreorder\n\t" \ + "lw $0,%0\n\t" \ + "nop\n\t" \ + ".set pop" \ + : /* no output */ \ + : "m" (*(int *)CKSEG1) \ + : "memory") + +#define fast_wmb() __sync() +#define fast_rmb() __sync() +#define fast_mb() __sync() +#ifdef CONFIG_SGI_IP28 +#define fast_iob() \ + __asm__ __volatile__( \ + ".set push\n\t" \ + ".set noreorder\n\t" \ + "lw $0,%0\n\t" \ + "sync\n\t" \ + "lw $0,%0\n\t" \ + ".set pop" \ + : /* no output */ \ + : "m" (*(int *)CKSEG1ADDR(0x1fa00004)) \ + : "memory") +#else +#define fast_iob() \ + do { \ + __sync(); \ + __fast_iob(); \ + } while (0) +#endif + +#ifdef CONFIG_CPU_HAS_WB + +#include <asm/wbflush.h> + +#define wmb() fast_wmb() +#define rmb() fast_rmb() +#define mb() wbflush() +#define iob() wbflush() + +#else /* !CONFIG_CPU_HAS_WB */ + +#define wmb() fast_wmb() +#define rmb() fast_rmb() +#define mb() fast_mb() +#define iob() fast_iob() + +#endif /* !CONFIG_CPU_HAS_WB */ + +#if defined(CONFIG_WEAK_ORDERING) && defined(CONFIG_SMP) +#define __WEAK_ORDERING_MB " sync \n" +#else +#define __WEAK_ORDERING_MB " \n" +#endif +#if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP) +#define __WEAK_LLSC_MB " sync \n" +#else +#define __WEAK_LLSC_MB " \n" +#endif + +#define smp_mb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory") +#define smp_rmb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory") +#define smp_wmb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory") + +#define set_mb(var, value) \ + do { var = value; smp_mb(); } while (0) + +#define smp_llsc_mb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory") +#define smp_llsc_rmb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory") +#define smp_llsc_wmb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory") + +#endif /* __ASM_BARRIER_H */ diff --git a/arch/mips/include/asm/bcache.h b/arch/mips/include/asm/bcache.h new file mode 100644 index 000000000000..0ba9d6ef76a7 --- /dev/null +++ b/arch/mips/include/asm/bcache.h @@ -0,0 +1,60 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1997, 1999 by Ralf Baechle + * Copyright (c) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_BCACHE_H +#define _ASM_BCACHE_H + + +/* Some R4000 / R4400 / R4600 / R5000 machines may have a non-dma-coherent, + chipset implemented caches. On machines with other CPUs the CPU does the + cache thing itself. */ +struct bcache_ops { + void (*bc_enable)(void); + void (*bc_disable)(void); + void (*bc_wback_inv)(unsigned long page, unsigned long size); + void (*bc_inv)(unsigned long page, unsigned long size); +}; + +extern void indy_sc_init(void); + +#ifdef CONFIG_BOARD_SCACHE + +extern struct bcache_ops *bcops; + +static inline void bc_enable(void) +{ + bcops->bc_enable(); +} + +static inline void bc_disable(void) +{ + bcops->bc_disable(); +} + +static inline void bc_wback_inv(unsigned long page, unsigned long size) +{ + bcops->bc_wback_inv(page, size); +} + +static inline void bc_inv(unsigned long page, unsigned long size) +{ + bcops->bc_inv(page, size); +} + +#else /* !defined(CONFIG_BOARD_SCACHE) */ + +/* Not R4000 / R4400 / R4600 / R5000. */ + +#define bc_enable() do { } while (0) +#define bc_disable() do { } while (0) +#define bc_wback_inv(page, size) do { } while (0) +#define bc_inv(page, size) do { } while (0) + +#endif /* !defined(CONFIG_BOARD_SCACHE) */ + +#endif /* _ASM_BCACHE_H */ diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h new file mode 100644 index 000000000000..49df8c4c9d25 --- /dev/null +++ b/arch/mips/include/asm/bitops.h @@ -0,0 +1,672 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1994 - 1997, 99, 2000, 06, 07 Ralf Baechle (ralf@linux-mips.org) + * Copyright (c) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_BITOPS_H +#define _ASM_BITOPS_H + +#ifndef _LINUX_BITOPS_H +#error only <linux/bitops.h> can be included directly +#endif + +#include <linux/compiler.h> +#include <linux/irqflags.h> +#include <linux/types.h> +#include <asm/barrier.h> +#include <asm/bug.h> +#include <asm/byteorder.h> /* sigh ... */ +#include <asm/cpu-features.h> +#include <asm/sgidefs.h> +#include <asm/war.h> + +#if _MIPS_SZLONG == 32 +#define SZLONG_LOG 5 +#define SZLONG_MASK 31UL +#define __LL "ll " +#define __SC "sc " +#define __INS "ins " +#define __EXT "ext " +#elif _MIPS_SZLONG == 64 +#define SZLONG_LOG 6 +#define SZLONG_MASK 63UL +#define __LL "lld " +#define __SC "scd " +#define __INS "dins " +#define __EXT "dext " +#endif + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() smp_llsc_mb() +#define smp_mb__after_clear_bit() smp_llsc_mb() + +/* + * set_bit - Atomically set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * This function is atomic and may not be reordered. See __set_bit() + * if you do not require the atomic guarantees. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static inline void set_bit(unsigned long nr, volatile unsigned long *addr) +{ + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned short bit = nr & SZLONG_MASK; + unsigned long temp; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # set_bit \n" + " or %0, %2 \n" + " " __SC "%0, %1 \n" + " beqzl %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m) + : "ir" (1UL << bit), "m" (*m)); +#ifdef CONFIG_CPU_MIPSR2 + } else if (__builtin_constant_p(bit)) { + __asm__ __volatile__( + "1: " __LL "%0, %1 # set_bit \n" + " " __INS "%0, %4, %2, 1 \n" + " " __SC "%0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + : "=&r" (temp), "=m" (*m) + : "ir" (bit), "m" (*m), "r" (~0)); +#endif /* CONFIG_CPU_MIPSR2 */ + } else if (cpu_has_llsc) { + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # set_bit \n" + " or %0, %2 \n" + " " __SC "%0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m) + : "ir" (1UL << bit), "m" (*m)); + } else { + volatile unsigned long *a = addr; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + *a |= mask; + raw_local_irq_restore(flags); + } +} + +/* + * clear_bit - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and may not be reordered. However, it does + * not contain a memory barrier, so if it is used for locking purposes, + * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * in order to ensure changes are visible on other processors. + */ +static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) +{ + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned short bit = nr & SZLONG_MASK; + unsigned long temp; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # clear_bit \n" + " and %0, %2 \n" + " " __SC "%0, %1 \n" + " beqzl %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m) + : "ir" (~(1UL << bit)), "m" (*m)); +#ifdef CONFIG_CPU_MIPSR2 + } else if (__builtin_constant_p(bit)) { + __asm__ __volatile__( + "1: " __LL "%0, %1 # clear_bit \n" + " " __INS "%0, $0, %2, 1 \n" + " " __SC "%0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + : "=&r" (temp), "=m" (*m) + : "ir" (bit), "m" (*m)); +#endif /* CONFIG_CPU_MIPSR2 */ + } else if (cpu_has_llsc) { + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # clear_bit \n" + " and %0, %2 \n" + " " __SC "%0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m) + : "ir" (~(1UL << bit)), "m" (*m)); + } else { + volatile unsigned long *a = addr; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + *a &= ~mask; + raw_local_irq_restore(flags); + } +} + +/* + * clear_bit_unlock - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and implies release semantics before the memory + * operation. It can be used for an unlock. + */ +static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *addr) +{ + smp_mb__before_clear_bit(); + clear_bit(nr, addr); +} + +/* + * change_bit - Toggle a bit in memory + * @nr: Bit to change + * @addr: Address to start counting from + * + * change_bit() is atomic and may not be reordered. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static inline void change_bit(unsigned long nr, volatile unsigned long *addr) +{ + unsigned short bit = nr & SZLONG_MASK; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # change_bit \n" + " xor %0, %2 \n" + " " __SC "%0, %1 \n" + " beqzl %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m) + : "ir" (1UL << bit), "m" (*m)); + } else if (cpu_has_llsc) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # change_bit \n" + " xor %0, %2 \n" + " " __SC "%0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m) + : "ir" (1UL << bit), "m" (*m)); + } else { + volatile unsigned long *a = addr; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + *a ^= mask; + raw_local_irq_restore(flags); + } +} + +/* + * test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_set_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned short bit = nr & SZLONG_MASK; + unsigned long res; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_set_bit \n" + " or %2, %0, %3 \n" + " " __SC "%2, %1 \n" + " beqzl %2, 1b \n" + " and %2, %0, %3 \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_set_bit \n" + " or %2, %0, %3 \n" + " " __SC "%2, %1 \n" + " beqz %2, 2f \n" + " and %2, %0, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" + " .set pop \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); + } else { + volatile unsigned long *a = addr; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + res = (mask & *a); + *a |= mask; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return res != 0; +} + +/* + * test_and_set_bit_lock - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and implies acquire ordering semantics + * after the memory operation. + */ +static inline int test_and_set_bit_lock(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned short bit = nr & SZLONG_MASK; + unsigned long res; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_set_bit \n" + " or %2, %0, %3 \n" + " " __SC "%2, %1 \n" + " beqzl %2, 1b \n" + " and %2, %0, %3 \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_set_bit \n" + " or %2, %0, %3 \n" + " " __SC "%2, %1 \n" + " beqz %2, 2f \n" + " and %2, %0, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" + " .set pop \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); + } else { + volatile unsigned long *a = addr; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + res = (mask & *a); + *a |= mask; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return res != 0; +} +/* + * test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to clear + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_clear_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned short bit = nr & SZLONG_MASK; + unsigned long res; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_clear_bit \n" + " or %2, %0, %3 \n" + " xor %2, %3 \n" + " " __SC "%2, %1 \n" + " beqzl %2, 1b \n" + " and %2, %0, %3 \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); +#ifdef CONFIG_CPU_MIPSR2 + } else if (__builtin_constant_p(nr)) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + "1: " __LL "%0, %1 # test_and_clear_bit \n" + " " __EXT "%2, %0, %3, 1 \n" + " " __INS "%0, $0, %3, 1 \n" + " " __SC "%0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "ir" (bit), "m" (*m) + : "memory"); +#endif + } else if (cpu_has_llsc) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_clear_bit \n" + " or %2, %0, %3 \n" + " xor %2, %3 \n" + " " __SC "%2, %1 \n" + " beqz %2, 2f \n" + " and %2, %0, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" + " .set pop \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); + } else { + volatile unsigned long *a = addr; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + res = (mask & *a); + *a &= ~mask; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return res != 0; +} + +/* + * test_and_change_bit - Change a bit and return its old value + * @nr: Bit to change + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_change_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned short bit = nr & SZLONG_MASK; + unsigned long res; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_change_bit \n" + " xor %2, %0, %3 \n" + " " __SC "%2, %1 \n" + " beqzl %2, 1b \n" + " and %2, %0, %3 \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_change_bit \n" + " xor %2, %0, %3 \n" + " " __SC "\t%2, %1 \n" + " beqz %2, 2f \n" + " and %2, %0, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" + " .set pop \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); + } else { + volatile unsigned long *a = addr; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + res = (mask & *a); + *a ^= mask; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return res != 0; +} + +#include <asm-generic/bitops/non-atomic.h> + +/* + * __clear_bit_unlock - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * __clear_bit() is non-atomic and implies release semantics before the memory + * operation. It can be used for an unlock if no other CPUs can concurrently + * modify other bits in the word. + */ +static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *addr) +{ + smp_mb(); + __clear_bit(nr, addr); +} + +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + +/* + * Return the bit position (0..63) of the most significant 1 bit in a word + * Returns -1 if no 1 bit exists + */ +static inline unsigned long __fls(unsigned long x) +{ + int lz; + + if (sizeof(x) == 4) { + __asm__( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (lz) + : "r" (x)); + + return 31 - lz; + } + + BUG_ON(sizeof(x) != 8); + + __asm__( + " .set push \n" + " .set mips64 \n" + " dclz %0, %1 \n" + " .set pop \n" + : "=r" (lz) + : "r" (x)); + + return 63 - lz; +} + +/* + * __ffs - find first bit in word. + * @word: The word to search + * + * Returns 0..SZLONG-1 + * Undefined if no bit exists, so code should check against 0 first. + */ +static inline unsigned long __ffs(unsigned long word) +{ + return __fls(word & -word); +} + +/* + * fls - find last bit set. + * @word: The word to search + * + * This is defined the same way as ffs. + * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. + */ +static inline int fls(int word) +{ + __asm__("clz %0, %1" : "=r" (word) : "r" (word)); + + return 32 - word; +} + +#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPS64) +static inline int fls64(__u64 word) +{ + __asm__("dclz %0, %1" : "=r" (word) : "r" (word)); + + return 64 - word; +} +#else +#include <asm-generic/bitops/fls64.h> +#endif + +/* + * ffs - find first bit set. + * @word: The word to search + * + * This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ +static inline int ffs(int word) +{ + if (!word) + return 0; + + return fls(word & -word); +} + +#else + +#include <asm-generic/bitops/__ffs.h> +#include <asm-generic/bitops/__fls.h> +#include <asm-generic/bitops/ffs.h> +#include <asm-generic/bitops/fls.h> +#include <asm-generic/bitops/fls64.h> + +#endif /*defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) */ + +#include <asm-generic/bitops/ffz.h> +#include <asm-generic/bitops/find.h> + +#ifdef __KERNEL__ + +#include <asm-generic/bitops/sched.h> +#include <asm-generic/bitops/hweight.h> +#include <asm-generic/bitops/ext2-non-atomic.h> +#include <asm-generic/bitops/ext2-atomic.h> +#include <asm-generic/bitops/minix.h> + +#endif /* __KERNEL__ */ + +#endif /* _ASM_BITOPS_H */ diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h new file mode 100644 index 000000000000..610fe3af7a03 --- /dev/null +++ b/arch/mips/include/asm/bootinfo.h @@ -0,0 +1,110 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1996, 2003 by Ralf Baechle + * Copyright (C) 1995, 1996 Andreas Busse + * Copyright (C) 1995, 1996 Stoned Elipot + * Copyright (C) 1995, 1996 Paul M. Antoine. + */ +#ifndef _ASM_BOOTINFO_H +#define _ASM_BOOTINFO_H + +#include <linux/types.h> +#include <asm/setup.h> + +/* + * The MACH_ IDs are sort of equivalent to PCI product IDs. As such the + * numbers do not necessarily reflect technical relations or similarities + * between systems. + */ + +/* + * Valid machtype values for group unknown + */ +#define MACH_UNKNOWN 0 /* whatever... */ + +/* + * Valid machtype for group DEC + */ +#define MACH_DSUNKNOWN 0 +#define MACH_DS23100 1 /* DECstation 2100 or 3100 */ +#define MACH_DS5100 2 /* DECsystem 5100 */ +#define MACH_DS5000_200 3 /* DECstation 5000/200 */ +#define MACH_DS5000_1XX 4 /* DECstation 5000/120, 125, 133, 150 */ +#define MACH_DS5000_XX 5 /* DECstation 5000/20, 25, 33, 50 */ +#define MACH_DS5000_2X0 6 /* DECstation 5000/240, 260 */ +#define MACH_DS5400 7 /* DECsystem 5400 */ +#define MACH_DS5500 8 /* DECsystem 5500 */ +#define MACH_DS5800 9 /* DECsystem 5800 */ +#define MACH_DS5900 10 /* DECsystem 5900 */ + +/* + * Valid machtype for group PMC-MSP + */ +#define MACH_MSP4200_EVAL 0 /* PMC-Sierra MSP4200 Evaluation */ +#define MACH_MSP4200_GW 1 /* PMC-Sierra MSP4200 Gateway demo */ +#define MACH_MSP4200_FPGA 2 /* PMC-Sierra MSP4200 Emulation */ +#define MACH_MSP7120_EVAL 3 /* PMC-Sierra MSP7120 Evaluation */ +#define MACH_MSP7120_GW 4 /* PMC-Sierra MSP7120 Residential GW */ +#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */ +#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */ + +/* + * Valid machtype for group Mikrotik + */ +#define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ +#define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */ + +#define CL_SIZE COMMAND_LINE_SIZE + +extern char *system_type; +const char *get_system_type(void); + +extern unsigned long mips_machtype; + +#define BOOT_MEM_MAP_MAX 32 +#define BOOT_MEM_RAM 1 +#define BOOT_MEM_ROM_DATA 2 +#define BOOT_MEM_RESERVED 3 + +/* + * A memory map that's built upon what was determined + * or specified on the command line. + */ +struct boot_mem_map { + int nr_map; + struct boot_mem_map_entry { + phys_t addr; /* start of memory segment */ + phys_t size; /* size of memory segment */ + long type; /* type of memory segment */ + } map[BOOT_MEM_MAP_MAX]; +}; + +extern struct boot_mem_map boot_mem_map; + +extern void add_memory_region(phys_t start, phys_t size, long type); + +extern void prom_init(void); +extern void prom_free_prom_memory(void); + +extern void free_init_pages(const char *what, + unsigned long begin, unsigned long end); + +/* + * Initial kernel command line, usually setup by prom_init() + */ +extern char arcs_cmdline[CL_SIZE]; + +/* + * Registers a0, a1, a3 and a4 as passed to the kernel entry by firmware + */ +extern unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3; + +/* + * Platform memory detection hook called by setup_arch + */ +extern void plat_mem_setup(void); + +#endif /* _ASM_BOOTINFO_H */ diff --git a/arch/mips/include/asm/branch.h b/arch/mips/include/asm/branch.h new file mode 100644 index 000000000000..37c6857c8d4a --- /dev/null +++ b/arch/mips/include/asm/branch.h @@ -0,0 +1,38 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1997, 1998, 2001 by Ralf Baechle + */ +#ifndef _ASM_BRANCH_H +#define _ASM_BRANCH_H + +#include <asm/ptrace.h> + +static inline int delay_slot(struct pt_regs *regs) +{ + return regs->cp0_cause & CAUSEF_BD; +} + +static inline unsigned long exception_epc(struct pt_regs *regs) +{ + if (!delay_slot(regs)) + return regs->cp0_epc; + + return regs->cp0_epc + 4; +} + +extern int __compute_return_epc(struct pt_regs *regs); + +static inline int compute_return_epc(struct pt_regs *regs) +{ + if (!delay_slot(regs)) { + regs->cp0_epc += 4; + return 0; + } + + return __compute_return_epc(regs); +} + +#endif /* _ASM_BRANCH_H */ diff --git a/arch/mips/include/asm/break.h b/arch/mips/include/asm/break.h new file mode 100644 index 000000000000..25b980c91e7e --- /dev/null +++ b/arch/mips/include/asm/break.h @@ -0,0 +1,34 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 2003 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef __ASM_BREAK_H +#define __ASM_BREAK_H + +/* + * The following break codes are or were in use for specific purposes in + * other MIPS operating systems. Linux/MIPS doesn't use all of them. The + * unused ones are here as placeholders; we might encounter them in + * non-Linux/MIPS object files or make use of them in the future. + */ +#define BRK_USERBP 0 /* User bp (used by debuggers) */ +#define BRK_KERNELBP 1 /* Break in the kernel */ +#define BRK_ABORT 2 /* Sometimes used by abort(3) to SIGIOT */ +#define BRK_BD_TAKEN 3 /* For bd slot emulation - not implemented */ +#define BRK_BD_NOTTAKEN 4 /* For bd slot emulation - not implemented */ +#define BRK_SSTEPBP 5 /* User bp (used by debuggers) */ +#define BRK_OVERFLOW 6 /* Overflow check */ +#define BRK_DIVZERO 7 /* Divide by zero check */ +#define BRK_RANGE 8 /* Range error check */ +#define BRK_STACKOVERFLOW 9 /* For Ada stackchecking */ +#define BRK_NORLD 10 /* No rld found - not used by Linux/MIPS */ +#define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */ +#define BRK_BUG 512 /* Used by BUG() */ +#define BRK_KDB 513 /* Used in KDB_ENTER() */ +#define BRK_MULOVF 1023 /* Multiply overflow */ + +#endif /* __ASM_BREAK_H */ diff --git a/arch/mips/include/asm/bug.h b/arch/mips/include/asm/bug.h new file mode 100644 index 000000000000..7eb63de808bc --- /dev/null +++ b/arch/mips/include/asm/bug.h @@ -0,0 +1,33 @@ +#ifndef __ASM_BUG_H +#define __ASM_BUG_H + +#include <asm/sgidefs.h> + +#ifdef CONFIG_BUG + +#include <asm/break.h> + +#define BUG() \ +do { \ + __asm__ __volatile__("break %0" : : "i" (BRK_BUG)); \ +} while (0) + +#define HAVE_ARCH_BUG + +#if (_MIPS_ISA > _MIPS_ISA_MIPS1) + +#define BUG_ON(condition) \ +do { \ + __asm__ __volatile__("tne $0, %0, %1" \ + : : "r" (condition), "i" (BRK_BUG)); \ +} while (0) + +#define HAVE_ARCH_BUG_ON + +#endif /* _MIPS_ISA > _MIPS_ISA_MIPS1 */ + +#endif + +#include <asm-generic/bug.h> + +#endif /* __ASM_BUG_H */ diff --git a/arch/mips/include/asm/bugs.h b/arch/mips/include/asm/bugs.h new file mode 100644 index 000000000000..9dc10df32078 --- /dev/null +++ b/arch/mips/include/asm/bugs.h @@ -0,0 +1,53 @@ +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Copyright (C) 2007 Maciej W. Rozycki + * + * Needs: + * void check_bugs(void); + */ +#ifndef _ASM_BUGS_H +#define _ASM_BUGS_H + +#include <linux/bug.h> +#include <linux/delay.h> + +#include <asm/cpu.h> +#include <asm/cpu-info.h> + +extern int daddiu_bug; + +extern void check_bugs64_early(void); + +extern void check_bugs32(void); +extern void check_bugs64(void); + +static inline void check_bugs_early(void) +{ +#ifdef CONFIG_64BIT + check_bugs64_early(); +#endif +} + +static inline void check_bugs(void) +{ + unsigned int cpu = smp_processor_id(); + + cpu_data[cpu].udelay_val = loops_per_jiffy; + check_bugs32(); +#ifdef CONFIG_64BIT + check_bugs64(); +#endif +} + +static inline int r4k_daddiu_bug(void) +{ +#ifdef CONFIG_64BIT + WARN_ON(daddiu_bug < 0); + return daddiu_bug != 0; +#else + return 0; +#endif +} + +#endif /* _ASM_BUGS_H */ diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h new file mode 100644 index 000000000000..fe7dc2d59b69 --- /dev/null +++ b/arch/mips/include/asm/byteorder.h @@ -0,0 +1,76 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 99, 2003 by Ralf Baechle + */ +#ifndef _ASM_BYTEORDER_H +#define _ASM_BYTEORDER_H + +#include <linux/compiler.h> +#include <asm/types.h> + +#ifdef __GNUC__ + +#ifdef CONFIG_CPU_MIPSR2 + +static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x) +{ + __asm__( + " wsbh %0, %1 \n" + : "=r" (x) + : "r" (x)); + + return x; +} +#define __arch__swab16(x) ___arch__swab16(x) + +static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x) +{ + __asm__( + " wsbh %0, %1 \n" + " rotr %0, %0, 16 \n" + : "=r" (x) + : "r" (x)); + + return x; +} +#define __arch__swab32(x) ___arch__swab32(x) + +#ifdef CONFIG_CPU_MIPS64_R2 + +static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x) +{ + __asm__( + " dsbh %0, %1 \n" + " dshd %0, %0 \n" + " drotr %0, %0, 32 \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +#define __arch__swab64(x) ___arch__swab64(x) + +#endif /* CONFIG_CPU_MIPS64_R2 */ + +#endif /* CONFIG_CPU_MIPSR2 */ + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#endif /* __GNUC__ */ + +#if defined(__MIPSEB__) +# include <linux/byteorder/big_endian.h> +#elif defined(__MIPSEL__) +# include <linux/byteorder/little_endian.h> +#else +# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???" +#endif + +#endif /* _ASM_BYTEORDER_H */ diff --git a/arch/mips/include/asm/cache.h b/arch/mips/include/asm/cache.h new file mode 100644 index 000000000000..37f175c42bb5 --- /dev/null +++ b/arch/mips/include/asm/cache.h @@ -0,0 +1,20 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997, 98, 99, 2000, 2003 Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_CACHE_H +#define _ASM_CACHE_H + +#include <kmalloc.h> + +#define L1_CACHE_SHIFT CONFIG_MIPS_L1_CACHE_SHIFT +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define SMP_CACHE_SHIFT L1_CACHE_SHIFT +#define SMP_CACHE_BYTES L1_CACHE_BYTES + +#endif /* _ASM_CACHE_H */ diff --git a/arch/mips/include/asm/cachectl.h b/arch/mips/include/asm/cachectl.h new file mode 100644 index 000000000000..f3ce721861d3 --- /dev/null +++ b/arch/mips/include/asm/cachectl.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995, 1996 by Ralf Baechle + */ +#ifndef _ASM_CACHECTL +#define _ASM_CACHECTL + +/* + * Options for cacheflush system call + */ +#define ICACHE (1<<0) /* flush instruction cache */ +#define DCACHE (1<<1) /* writeback and flush data cache */ +#define BCACHE (ICACHE|DCACHE) /* flush both caches */ + +/* + * Caching modes for the cachectl(2) call + * + * cachectl(2) is currently not supported and returns ENOSYS. + */ +#define CACHEABLE 0 /* make pages cacheable */ +#define UNCACHEABLE 1 /* make pages uncacheable */ + +#endif /* _ASM_CACHECTL */ diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h new file mode 100644 index 000000000000..03b1d69b142f --- /dev/null +++ b/arch/mips/include/asm/cacheflush.h @@ -0,0 +1,116 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03 by Ralf Baechle + * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. + */ +#ifndef _ASM_CACHEFLUSH_H +#define _ASM_CACHEFLUSH_H + +/* Keep includes the same across arches. */ +#include <linux/mm.h> +#include <asm/cpu-features.h> + +/* Cache flushing: + * + * - flush_cache_all() flushes entire cache + * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking + * - flush_cache_page(mm, vmaddr, pfn) flushes a single page + * - flush_cache_range(vma, start, end) flushes a range of pages + * - flush_icache_range(start, end) flush a range of instructions + * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache + * + * MIPS specific flush operations: + * + * - flush_cache_sigtramp() flush signal trampoline + * - flush_icache_all() flush the entire instruction cache + * - flush_data_cache_page() flushes a page from the data cache + */ +extern void (*flush_cache_all)(void); +extern void (*__flush_cache_all)(void); +extern void (*flush_cache_mm)(struct mm_struct *mm); +#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0) +extern void (*flush_cache_range)(struct vm_area_struct *vma, + unsigned long start, unsigned long end); +extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); +extern void __flush_dcache_page(struct page *page); + +static inline void flush_dcache_page(struct page *page) +{ + if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc) + __flush_dcache_page(page); + +} + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +#define ARCH_HAS_FLUSH_ANON_PAGE +extern void __flush_anon_page(struct page *, unsigned long); +static inline void flush_anon_page(struct vm_area_struct *vma, + struct page *page, unsigned long vmaddr) +{ + if (cpu_has_dc_aliases && PageAnon(page)) + __flush_anon_page(page, vmaddr); +} + +static inline void flush_icache_page(struct vm_area_struct *vma, + struct page *page) +{ +} + +extern void (*flush_icache_range)(unsigned long start, unsigned long end); +extern void (*local_flush_icache_range)(unsigned long start, unsigned long end); + +extern void (*__flush_cache_vmap)(void); + +static inline void flush_cache_vmap(unsigned long start, unsigned long end) +{ + if (cpu_has_dc_aliases) + __flush_cache_vmap(); +} + +extern void (*__flush_cache_vunmap)(void); + +static inline void flush_cache_vunmap(unsigned long start, unsigned long end) +{ + if (cpu_has_dc_aliases) + __flush_cache_vunmap(); +} + +extern void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len); + +extern void copy_from_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len); + +extern void (*flush_cache_sigtramp)(unsigned long addr); +extern void (*flush_icache_all)(void); +extern void (*local_flush_data_cache_page)(void * addr); +extern void (*flush_data_cache_page)(unsigned long addr); + +/* + * This flag is used to indicate that the page pointed to by a pte + * is dirty and requires cleaning before returning it to the user. + */ +#define PG_dcache_dirty PG_arch_1 + +#define Page_dcache_dirty(page) \ + test_bit(PG_dcache_dirty, &(page)->flags) +#define SetPageDcacheDirty(page) \ + set_bit(PG_dcache_dirty, &(page)->flags) +#define ClearPageDcacheDirty(page) \ + clear_bit(PG_dcache_dirty, &(page)->flags) + +/* Run kernel code uncached, useful for cache probing functions. */ +unsigned long run_uncached(void *func); + +extern void *kmap_coherent(struct page *page, unsigned long addr); +extern void kunmap_coherent(void); + +#endif /* _ASM_CACHEFLUSH_H */ diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h new file mode 100644 index 000000000000..256ad2cc6eb8 --- /dev/null +++ b/arch/mips/include/asm/cacheops.h @@ -0,0 +1,85 @@ +/* + * Cache operations for the cache instruction. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle + * (C) Copyright 1999 Silicon Graphics, Inc. + */ +#ifndef __ASM_CACHEOPS_H +#define __ASM_CACHEOPS_H + +/* + * Cache Operations available on all MIPS processors with R4000-style caches + */ +#define Index_Invalidate_I 0x00 +#define Index_Writeback_Inv_D 0x01 +#define Index_Load_Tag_I 0x04 +#define Index_Load_Tag_D 0x05 +#define Index_Store_Tag_I 0x08 +#define Index_Store_Tag_D 0x09 +#if defined(CONFIG_CPU_LOONGSON2) +#define Hit_Invalidate_I 0x00 +#else +#define Hit_Invalidate_I 0x10 +#endif +#define Hit_Invalidate_D 0x11 +#define Hit_Writeback_Inv_D 0x15 + +/* + * R4000-specific cacheops + */ +#define Create_Dirty_Excl_D 0x0d +#define Fill 0x14 +#define Hit_Writeback_I 0x18 +#define Hit_Writeback_D 0x19 + +/* + * R4000SC and R4400SC-specific cacheops + */ +#define Index_Invalidate_SI 0x02 +#define Index_Writeback_Inv_SD 0x03 +#define Index_Load_Tag_SI 0x06 +#define Index_Load_Tag_SD 0x07 +#define Index_Store_Tag_SI 0x0A +#define Index_Store_Tag_SD 0x0B +#define Create_Dirty_Excl_SD 0x0f +#define Hit_Invalidate_SI 0x12 +#define Hit_Invalidate_SD 0x13 +#define Hit_Writeback_Inv_SD 0x17 +#define Hit_Writeback_SD 0x1b +#define Hit_Set_Virtual_SI 0x1e +#define Hit_Set_Virtual_SD 0x1f + +/* + * R5000-specific cacheops + */ +#define R5K_Page_Invalidate_S 0x17 + +/* + * RM7000-specific cacheops + */ +#define Page_Invalidate_T 0x16 + +/* + * R10000-specific cacheops + * + * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused. + * Most of the _S cacheops are identical to the R4000SC _SD cacheops. + */ +#define Index_Writeback_Inv_S 0x03 +#define Index_Load_Tag_S 0x07 +#define Index_Store_Tag_S 0x0B +#define Hit_Invalidate_S 0x13 +#define Cache_Barrier 0x14 +#define Hit_Writeback_Inv_S 0x17 +#define Index_Load_Data_I 0x18 +#define Index_Load_Data_D 0x19 +#define Index_Load_Data_S 0x1b +#define Index_Store_Data_I 0x1c +#define Index_Store_Data_D 0x1d +#define Index_Store_Data_S 0x1f + +#endif /* __ASM_CACHEOPS_H */ diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h new file mode 100644 index 000000000000..290485ac5407 --- /dev/null +++ b/arch/mips/include/asm/checksum.h @@ -0,0 +1,260 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 97, 98, 99, 2001 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 2001 Thiemo Seufer. + * Copyright (C) 2002 Maciej W. Rozycki + */ +#ifndef _ASM_CHECKSUM_H +#define _ASM_CHECKSUM_H + +#include <linux/in6.h> + +#include <asm/uaccess.h> + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +__wsum __csum_partial_copy_user(const void *src, void *dst, + int len, __wsum sum, int *err_ptr); + +/* + * this is a new version of the above that records errors it finds in *errp, + * but continues and zeros the rest of the buffer. + */ +static inline +__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len, + __wsum sum, int *err_ptr) +{ + might_sleep(); + return __csum_partial_copy_user((__force void *)src, dst, + len, sum, err_ptr); +} + +/* + * Copy and checksum to user + */ +#define HAVE_CSUM_COPY_USER +static inline +__wsum csum_and_copy_to_user(const void *src, void __user *dst, int len, + __wsum sum, int *err_ptr) +{ + might_sleep(); + if (access_ok(VERIFY_WRITE, dst, len)) + return __csum_partial_copy_user(src, (__force void *)dst, + len, sum, err_ptr); + if (len) + *err_ptr = -EFAULT; + + return (__force __wsum)-1; /* invalid checksum */ +} + +/* + * the same as csum_partial, but copies from user space (but on MIPS + * we have just one address space, so this is identical to the above) + */ +__wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum); + +/* + * Fold a partial checksum without adding pseudo headers + */ +static inline __sum16 csum_fold(__wsum sum) +{ + __asm__( + " .set push # csum_fold\n" + " .set noat \n" + " sll $1, %0, 16 \n" + " addu %0, $1 \n" + " sltu $1, %0, $1 \n" + " srl %0, %0, 16 \n" + " addu %0, $1 \n" + " xori %0, 0xffff \n" + " .set pop" + : "=r" (sum) + : "0" (sum)); + + return (__force __sum16)sum; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + * + * By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by + * Arnt Gulbrandsen. + */ +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + const unsigned int *word = iph; + const unsigned int *stop = word + ihl; + unsigned int csum; + int carry; + + csum = word[0]; + csum += word[1]; + carry = (csum < word[1]); + csum += carry; + + csum += word[2]; + carry = (csum < word[2]); + csum += carry; + + csum += word[3]; + carry = (csum < word[3]); + csum += carry; + + word += 4; + do { + csum += *word; + carry = (csum < *word); + csum += carry; + word++; + } while (word != stop); + + return csum_fold(csum); +} + +static inline __wsum csum_tcpudp_nofold(__be32 saddr, + __be32 daddr, unsigned short len, unsigned short proto, + __wsum sum) +{ + __asm__( + " .set push # csum_tcpudp_nofold\n" + " .set noat \n" +#ifdef CONFIG_32BIT + " addu %0, %2 \n" + " sltu $1, %0, %2 \n" + " addu %0, $1 \n" + + " addu %0, %3 \n" + " sltu $1, %0, %3 \n" + " addu %0, $1 \n" + + " addu %0, %4 \n" + " sltu $1, %0, %4 \n" + " addu %0, $1 \n" +#endif +#ifdef CONFIG_64BIT + " daddu %0, %2 \n" + " daddu %0, %3 \n" + " daddu %0, %4 \n" + " dsll32 $1, %0, 0 \n" + " daddu %0, $1 \n" + " dsra32 %0, %0, 0 \n" +#endif + " .set pop" + : "=r" (sum) + : "0" ((__force unsigned long)daddr), + "r" ((__force unsigned long)saddr), +#ifdef __MIPSEL__ + "r" ((proto + len) << 8), +#else + "r" (proto + len), +#endif + "r" ((__force unsigned long)sum)); + + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, unsigned short proto, + __wsum sum) +{ + __asm__( + " .set push # csum_ipv6_magic\n" + " .set noreorder \n" + " .set noat \n" + " addu %0, %5 # proto (long in network byte order)\n" + " sltu $1, %0, %5 \n" + " addu %0, $1 \n" + + " addu %0, %6 # csum\n" + " sltu $1, %0, %6 \n" + " lw %1, 0(%2) # four words source address\n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " lw %1, 4(%2) \n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " lw %1, 8(%2) \n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " lw %1, 12(%2) \n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " lw %1, 0(%3) \n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " lw %1, 4(%3) \n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " lw %1, 8(%3) \n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " lw %1, 12(%3) \n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " addu %0, $1 # Add final carry\n" + " .set pop" + : "=r" (sum), "=r" (proto) + : "r" (saddr), "r" (daddr), + "0" (htonl(len)), "1" (htonl(proto)), "r" (sum)); + + return csum_fold(sum); +} + +#endif /* _ASM_CHECKSUM_H */ diff --git a/arch/mips/include/asm/cmp.h b/arch/mips/include/asm/cmp.h new file mode 100644 index 000000000000..89a73fb93ae6 --- /dev/null +++ b/arch/mips/include/asm/cmp.h @@ -0,0 +1,18 @@ +#ifndef _ASM_CMP_H +#define _ASM_CMP_H + +/* + * Definitions for CMP multitasking on MIPS cores + */ +struct task_struct; + +extern void cmp_smp_setup(void); +extern void cmp_smp_finish(void); +extern void cmp_boot_secondary(int cpu, struct task_struct *t); +extern void cmp_init_secondary(void); +extern void cmp_cpus_done(void); +extern void cmp_prepare_cpus(unsigned int max_cpus); + +/* This is platform specific */ +extern void cmp_send_ipi(int cpu, unsigned int action); +#endif /* _ASM_CMP_H */ diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h new file mode 100644 index 000000000000..4a812c3ceb90 --- /dev/null +++ b/arch/mips/include/asm/cmpxchg.h @@ -0,0 +1,124 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 06, 07 by Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_CMPXCHG_H +#define __ASM_CMPXCHG_H + +#include <linux/irqflags.h> + +#define __HAVE_ARCH_CMPXCHG 1 + +#define __cmpxchg_asm(ld, st, m, old, new) \ +({ \ + __typeof(*(m)) __ret; \ + \ + if (cpu_has_llsc && R10000_LLSC_WAR) { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " .set mips3 \n" \ + "1: " ld " %0, %2 # __cmpxchg_asm \n" \ + " bne %0, %z3, 2f \n" \ + " .set mips0 \n" \ + " move $1, %z4 \n" \ + " .set mips3 \n" \ + " " st " $1, %1 \n" \ + " beqzl $1, 1b \n" \ + "2: \n" \ + " .set pop \n" \ + : "=&r" (__ret), "=R" (*m) \ + : "R" (*m), "Jr" (old), "Jr" (new) \ + : "memory"); \ + } else if (cpu_has_llsc) { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " .set mips3 \n" \ + "1: " ld " %0, %2 # __cmpxchg_asm \n" \ + " bne %0, %z3, 2f \n" \ + " .set mips0 \n" \ + " move $1, %z4 \n" \ + " .set mips3 \n" \ + " " st " $1, %1 \n" \ + " beqz $1, 3f \n" \ + "2: \n" \ + " .subsection 2 \n" \ + "3: b 1b \n" \ + " .previous \n" \ + " .set pop \n" \ + : "=&r" (__ret), "=R" (*m) \ + : "R" (*m), "Jr" (old), "Jr" (new) \ + : "memory"); \ + } else { \ + unsigned long __flags; \ + \ + raw_local_irq_save(__flags); \ + __ret = *m; \ + if (__ret == old) \ + *m = new; \ + raw_local_irq_restore(__flags); \ + } \ + \ + __ret; \ +}) + +/* + * This function doesn't exist, so you'll get a linker error + * if something tries to do an invalid cmpxchg(). + */ +extern void __cmpxchg_called_with_bad_pointer(void); + +#define __cmpxchg(ptr, old, new, barrier) \ +({ \ + __typeof__(ptr) __ptr = (ptr); \ + __typeof__(*(ptr)) __old = (old); \ + __typeof__(*(ptr)) __new = (new); \ + __typeof__(*(ptr)) __res = 0; \ + \ + barrier; \ + \ + switch (sizeof(*(__ptr))) { \ + case 4: \ + __res = __cmpxchg_asm("ll", "sc", __ptr, __old, __new); \ + break; \ + case 8: \ + if (sizeof(long) == 8) { \ + __res = __cmpxchg_asm("lld", "scd", __ptr, \ + __old, __new); \ + break; \ + } \ + default: \ + __cmpxchg_called_with_bad_pointer(); \ + break; \ + } \ + \ + barrier; \ + \ + __res; \ +}) + +#define cmpxchg(ptr, old, new) __cmpxchg(ptr, old, new, smp_llsc_mb()) +#define cmpxchg_local(ptr, old, new) __cmpxchg(ptr, old, new, ) + +#define cmpxchg64(ptr, o, n) \ + ({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg((ptr), (o), (n)); \ + }) + +#ifdef CONFIG_64BIT +#define cmpxchg64_local(ptr, o, n) \ + ({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg_local((ptr), (o), (n)); \ + }) +#else +#include <asm-generic/cmpxchg-local.h> +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) +#endif + +#endif /* __ASM_CMPXCHG_H */ diff --git a/arch/mips/include/asm/compat-signal.h b/arch/mips/include/asm/compat-signal.h new file mode 100644 index 000000000000..368a99e5c3e1 --- /dev/null +++ b/arch/mips/include/asm/compat-signal.h @@ -0,0 +1,119 @@ +#ifndef __ASM_COMPAT_SIGNAL_H +#define __ASM_COMPAT_SIGNAL_H + +#include <linux/bug.h> +#include <linux/compat.h> +#include <linux/compiler.h> + +#include <asm/signal.h> +#include <asm/siginfo.h> + +#include <asm/uaccess.h> + +#define SI_PAD_SIZE32 ((SI_MAX_SIZE/sizeof(int)) - 3) + +typedef struct compat_siginfo { + int si_signo; + int si_code; + int si_errno; + + union { + int _pad[SI_PAD_SIZE32]; + + /* kill() */ + struct { + compat_pid_t _pid; /* sender's pid */ + compat_uid_t _uid; /* sender's uid */ + } _kill; + + /* SIGCHLD */ + struct { + compat_pid_t _pid; /* which child */ + compat_uid_t _uid; /* sender's uid */ + int _status; /* exit code */ + compat_clock_t _utime; + compat_clock_t _stime; + } _sigchld; + + /* IRIX SIGCHLD */ + struct { + compat_pid_t _pid; /* which child */ + compat_clock_t _utime; + int _status; /* exit code */ + compat_clock_t _stime; + } _irix_sigchld; + + /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ + struct { + s32 _addr; /* faulting insn/memory ref. */ + } _sigfault; + + /* SIGPOLL, SIGXFSZ (To do ...) */ + struct { + int _band; /* POLL_IN, POLL_OUT, POLL_MSG */ + int _fd; + } _sigpoll; + + /* POSIX.1b timers */ + struct { + timer_t _tid; /* timer id */ + int _overrun; /* overrun count */ + compat_sigval_t _sigval;/* same as below */ + int _sys_private; /* not to be passed to user */ + } _timer; + + /* POSIX.1b signals */ + struct { + compat_pid_t _pid; /* sender's pid */ + compat_uid_t _uid; /* sender's uid */ + compat_sigval_t _sigval; + } _rt; + + } _sifields; +} compat_siginfo_t; + +static inline int __copy_conv_sigset_to_user(compat_sigset_t __user *d, + const sigset_t *s) +{ + int err; + + BUG_ON(sizeof(*d) != sizeof(*s)); + BUG_ON(_NSIG_WORDS != 2); + + err = __put_user(s->sig[0], &d->sig[0]); + err |= __put_user(s->sig[0] >> 32, &d->sig[1]); + err |= __put_user(s->sig[1], &d->sig[2]); + err |= __put_user(s->sig[1] >> 32, &d->sig[3]); + + return err; +} + +static inline int __copy_conv_sigset_from_user(sigset_t *d, + const compat_sigset_t __user *s) +{ + int err; + union sigset_u { + sigset_t s; + compat_sigset_t c; + } *u = (union sigset_u *) d; + + BUG_ON(sizeof(*d) != sizeof(*s)); + BUG_ON(_NSIG_WORDS != 2); + +#ifdef CONFIG_CPU_BIG_ENDIAN + err = __get_user(u->c.sig[1], &s->sig[0]); + err |= __get_user(u->c.sig[0], &s->sig[1]); + err |= __get_user(u->c.sig[3], &s->sig[2]); + err |= __get_user(u->c.sig[2], &s->sig[3]); +#endif +#ifdef CONFIG_CPU_LITTLE_ENDIAN + err = __get_user(u->c.sig[0], &s->sig[0]); + err |= __get_user(u->c.sig[1], &s->sig[1]); + err |= __get_user(u->c.sig[2], &s->sig[2]); + err |= __get_user(u->c.sig[3], &s->sig[3]); +#endif + + return err; +} + +#endif /* __ASM_COMPAT_SIGNAL_H */ diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h new file mode 100644 index 000000000000..ac5d541368e9 --- /dev/null +++ b/arch/mips/include/asm/compat.h @@ -0,0 +1,221 @@ +#ifndef _ASM_COMPAT_H +#define _ASM_COMPAT_H +/* + * Architecture specific compatibility types + */ +#include <linux/types.h> +#include <asm/page.h> +#include <asm/ptrace.h> + +#define COMPAT_USER_HZ 100 + +typedef u32 compat_size_t; +typedef s32 compat_ssize_t; +typedef s32 compat_time_t; +typedef s32 compat_clock_t; +typedef s32 compat_suseconds_t; + +typedef s32 compat_pid_t; +typedef s32 __compat_uid_t; +typedef s32 __compat_gid_t; +typedef __compat_uid_t __compat_uid32_t; +typedef __compat_gid_t __compat_gid32_t; +typedef u32 compat_mode_t; +typedef u32 compat_ino_t; +typedef u32 compat_dev_t; +typedef s32 compat_off_t; +typedef s64 compat_loff_t; +typedef u32 compat_nlink_t; +typedef s32 compat_ipc_pid_t; +typedef s32 compat_daddr_t; +typedef s32 compat_caddr_t; +typedef struct { + s32 val[2]; +} compat_fsid_t; +typedef s32 compat_timer_t; +typedef s32 compat_key_t; + +typedef s32 compat_int_t; +typedef s32 compat_long_t; +typedef s64 compat_s64; +typedef u32 compat_uint_t; +typedef u32 compat_ulong_t; +typedef u64 compat_u64; + +struct compat_timespec { + compat_time_t tv_sec; + s32 tv_nsec; +}; + +struct compat_timeval { + compat_time_t tv_sec; + s32 tv_usec; +}; + +struct compat_stat { + compat_dev_t st_dev; + s32 st_pad1[3]; + compat_ino_t st_ino; + compat_mode_t st_mode; + compat_nlink_t st_nlink; + __compat_uid_t st_uid; + __compat_gid_t st_gid; + compat_dev_t st_rdev; + s32 st_pad2[2]; + compat_off_t st_size; + s32 st_pad3; + compat_time_t st_atime; + s32 st_atime_nsec; + compat_time_t st_mtime; + s32 st_mtime_nsec; + compat_time_t st_ctime; + s32 st_ctime_nsec; + s32 st_blksize; + s32 st_blocks; + s32 st_pad4[14]; +}; + +struct compat_flock { + short l_type; + short l_whence; + compat_off_t l_start; + compat_off_t l_len; + s32 l_sysid; + compat_pid_t l_pid; + short __unused; + s32 pad[4]; +}; + +#define F_GETLK64 33 +#define F_SETLK64 34 +#define F_SETLKW64 35 + +struct compat_flock64 { + short l_type; + short l_whence; + compat_loff_t l_start; + compat_loff_t l_len; + compat_pid_t l_pid; +}; + +struct compat_statfs { + int f_type; + int f_bsize; + int f_frsize; + int f_blocks; + int f_bfree; + int f_files; + int f_ffree; + int f_bavail; + compat_fsid_t f_fsid; + int f_namelen; + int f_spare[6]; +}; + +#define COMPAT_RLIM_INFINITY 0x7fffffffUL + +typedef u32 compat_old_sigset_t; /* at least 32 bits */ + +#define _COMPAT_NSIG 128 /* Don't ask !$@#% ... */ +#define _COMPAT_NSIG_BPW 32 + +typedef u32 compat_sigset_word; + +#define COMPAT_OFF_T_MAX 0x7fffffff +#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL + +/* + * A pointer passed in from user mode. This should not + * be used for syscall parameters, just declare them + * as pointers because the syscall entry code will have + * appropriately converted them already. + */ +typedef u32 compat_uptr_t; + +static inline void __user *compat_ptr(compat_uptr_t uptr) +{ + /* cast to a __user pointer via "unsigned long" makes sparse happy */ + return (void __user *)(unsigned long)(long)uptr; +} + +static inline compat_uptr_t ptr_to_compat(void __user *uptr) +{ + return (u32)(unsigned long)uptr; +} + +static inline void __user *compat_alloc_user_space(long len) +{ + struct pt_regs *regs = (struct pt_regs *) + ((unsigned long) current_thread_info() + THREAD_SIZE - 32) - 1; + + return (void __user *) (regs->regs[29] - len); +} + +struct compat_ipc64_perm { + compat_key_t key; + __compat_uid32_t uid; + __compat_gid32_t gid; + __compat_uid32_t cuid; + __compat_gid32_t cgid; + compat_mode_t mode; + unsigned short seq; + unsigned short __pad2; + compat_ulong_t __unused1; + compat_ulong_t __unused2; +}; + +struct compat_semid64_ds { + struct compat_ipc64_perm sem_perm; + compat_time_t sem_otime; + compat_time_t sem_ctime; + compat_ulong_t sem_nsems; + compat_ulong_t __unused1; + compat_ulong_t __unused2; +}; + +struct compat_msqid64_ds { + struct compat_ipc64_perm msg_perm; +#ifndef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused1; +#endif + compat_time_t msg_stime; +#ifdef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused1; +#endif +#ifndef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused2; +#endif + compat_time_t msg_rtime; +#ifdef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused2; +#endif +#ifndef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused3; +#endif + compat_time_t msg_ctime; +#ifdef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused3; +#endif + compat_ulong_t msg_cbytes; + compat_ulong_t msg_qnum; + compat_ulong_t msg_qbytes; + compat_pid_t msg_lspid; + compat_pid_t msg_lrpid; + compat_ulong_t __unused4; + compat_ulong_t __unused5; +}; + +struct compat_shmid64_ds { + struct compat_ipc64_perm shm_perm; + compat_size_t shm_segsz; + compat_time_t shm_atime; + compat_time_t shm_dtime; + compat_time_t shm_ctime; + compat_pid_t shm_cpid; + compat_pid_t shm_lpid; + compat_ulong_t shm_nattch; + compat_ulong_t __unused1; + compat_ulong_t __unused2; +}; + +#endif /* _ASM_COMPAT_H */ diff --git a/arch/mips/include/asm/compiler.h b/arch/mips/include/asm/compiler.h new file mode 100644 index 000000000000..71f5c5cfc58a --- /dev/null +++ b/arch/mips/include/asm/compiler.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2004, 2007 Maciej W. Rozycki + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef _ASM_COMPILER_H +#define _ASM_COMPILER_H + +#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) +#define GCC_IMM_ASM() "n" +#define GCC_REG_ACCUM "$0" +#else +#define GCC_IMM_ASM() "rn" +#define GCC_REG_ACCUM "accum" +#endif + +#endif /* _ASM_COMPILER_H */ diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h new file mode 100644 index 000000000000..5ea701fc3425 --- /dev/null +++ b/arch/mips/include/asm/cpu-features.h @@ -0,0 +1,219 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + */ +#ifndef __ASM_CPU_FEATURES_H +#define __ASM_CPU_FEATURES_H + +#include <asm/cpu.h> +#include <asm/cpu-info.h> +#include <cpu-feature-overrides.h> + +#ifndef current_cpu_type +#define current_cpu_type() current_cpu_data.cputype +#endif + +/* + * SMP assumption: Options of CPU 0 are a superset of all processors. + * This is true for all known MIPS systems. + */ +#ifndef cpu_has_tlb +#define cpu_has_tlb (cpu_data[0].options & MIPS_CPU_TLB) +#endif +#ifndef cpu_has_4kex +#define cpu_has_4kex (cpu_data[0].options & MIPS_CPU_4KEX) +#endif +#ifndef cpu_has_3k_cache +#define cpu_has_3k_cache (cpu_data[0].options & MIPS_CPU_3K_CACHE) +#endif +#define cpu_has_6k_cache 0 +#define cpu_has_8k_cache 0 +#ifndef cpu_has_4k_cache +#define cpu_has_4k_cache (cpu_data[0].options & MIPS_CPU_4K_CACHE) +#endif +#ifndef cpu_has_tx39_cache +#define cpu_has_tx39_cache (cpu_data[0].options & MIPS_CPU_TX39_CACHE) +#endif +#ifndef cpu_has_fpu +#define cpu_has_fpu (current_cpu_data.options & MIPS_CPU_FPU) +#define raw_cpu_has_fpu (raw_current_cpu_data.options & MIPS_CPU_FPU) +#else +#define raw_cpu_has_fpu cpu_has_fpu +#endif +#ifndef cpu_has_32fpr +#define cpu_has_32fpr (cpu_data[0].options & MIPS_CPU_32FPR) +#endif +#ifndef cpu_has_counter +#define cpu_has_counter (cpu_data[0].options & MIPS_CPU_COUNTER) +#endif +#ifndef cpu_has_watch +#define cpu_has_watch (cpu_data[0].options & MIPS_CPU_WATCH) +#endif +#ifndef cpu_has_divec +#define cpu_has_divec (cpu_data[0].options & MIPS_CPU_DIVEC) +#endif +#ifndef cpu_has_vce +#define cpu_has_vce (cpu_data[0].options & MIPS_CPU_VCE) +#endif +#ifndef cpu_has_cache_cdex_p +#define cpu_has_cache_cdex_p (cpu_data[0].options & MIPS_CPU_CACHE_CDEX_P) +#endif +#ifndef cpu_has_cache_cdex_s +#define cpu_has_cache_cdex_s (cpu_data[0].options & MIPS_CPU_CACHE_CDEX_S) +#endif +#ifndef cpu_has_prefetch +#define cpu_has_prefetch (cpu_data[0].options & MIPS_CPU_PREFETCH) +#endif +#ifndef cpu_has_mcheck +#define cpu_has_mcheck (cpu_data[0].options & MIPS_CPU_MCHECK) +#endif +#ifndef cpu_has_ejtag +#define cpu_has_ejtag (cpu_data[0].options & MIPS_CPU_EJTAG) +#endif +#ifndef cpu_has_llsc +#define cpu_has_llsc (cpu_data[0].options & MIPS_CPU_LLSC) +#endif +#ifndef cpu_has_mips16 +#define cpu_has_mips16 (cpu_data[0].ases & MIPS_ASE_MIPS16) +#endif +#ifndef cpu_has_mdmx +#define cpu_has_mdmx (cpu_data[0].ases & MIPS_ASE_MDMX) +#endif +#ifndef cpu_has_mips3d +#define cpu_has_mips3d (cpu_data[0].ases & MIPS_ASE_MIPS3D) +#endif +#ifndef cpu_has_smartmips +#define cpu_has_smartmips (cpu_data[0].ases & MIPS_ASE_SMARTMIPS) +#endif +#ifndef cpu_has_vtag_icache +#define cpu_has_vtag_icache (cpu_data[0].icache.flags & MIPS_CACHE_VTAG) +#endif +#ifndef cpu_has_dc_aliases +#define cpu_has_dc_aliases (cpu_data[0].dcache.flags & MIPS_CACHE_ALIASES) +#endif +#ifndef cpu_has_ic_fills_f_dc +#define cpu_has_ic_fills_f_dc (cpu_data[0].icache.flags & MIPS_CACHE_IC_F_DC) +#endif +#ifndef cpu_has_pindexed_dcache +#define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX) +#endif + +/* + * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors + * such as the R10000 have I-Caches that snoop local stores; the embedded ones + * don't. For maintaining I-cache coherency this means we need to flush the + * D-cache all the way back to whever the I-cache does refills from, so the + * I-cache has a chance to see the new data at all. Then we have to flush the + * I-cache also. + * Note we may have been rescheduled and may no longer be running on the CPU + * that did the store so we can't optimize this into only doing the flush on + * the local CPU. + */ +#ifndef cpu_icache_snoops_remote_store +#ifdef CONFIG_SMP +#define cpu_icache_snoops_remote_store (cpu_data[0].icache.flags & MIPS_IC_SNOOPS_REMOTE) +#else +#define cpu_icache_snoops_remote_store 1 +#endif +#endif + +# ifndef cpu_has_mips32r1 +# define cpu_has_mips32r1 (cpu_data[0].isa_level & MIPS_CPU_ISA_M32R1) +# endif +# ifndef cpu_has_mips32r2 +# define cpu_has_mips32r2 (cpu_data[0].isa_level & MIPS_CPU_ISA_M32R2) +# endif +# ifndef cpu_has_mips64r1 +# define cpu_has_mips64r1 (cpu_data[0].isa_level & MIPS_CPU_ISA_M64R1) +# endif +# ifndef cpu_has_mips64r2 +# define cpu_has_mips64r2 (cpu_data[0].isa_level & MIPS_CPU_ISA_M64R2) +# endif + +/* + * Shortcuts ... + */ +#define cpu_has_mips32 (cpu_has_mips32r1 | cpu_has_mips32r2) +#define cpu_has_mips64 (cpu_has_mips64r1 | cpu_has_mips64r2) +#define cpu_has_mips_r1 (cpu_has_mips32r1 | cpu_has_mips64r1) +#define cpu_has_mips_r2 (cpu_has_mips32r2 | cpu_has_mips64r2) + +#ifndef cpu_has_dsp +#define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP) +#endif + +#ifndef cpu_has_mipsmt +#define cpu_has_mipsmt (cpu_data[0].ases & MIPS_ASE_MIPSMT) +#endif + +#ifndef cpu_has_userlocal +#define cpu_has_userlocal (cpu_data[0].options & MIPS_CPU_ULRI) +#endif + +#ifdef CONFIG_32BIT +# ifndef cpu_has_nofpuex +# define cpu_has_nofpuex (cpu_data[0].options & MIPS_CPU_NOFPUEX) +# endif +# ifndef cpu_has_64bits +# define cpu_has_64bits (cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT) +# endif +# ifndef cpu_has_64bit_zero_reg +# define cpu_has_64bit_zero_reg (cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT) +# endif +# ifndef cpu_has_64bit_gp_regs +# define cpu_has_64bit_gp_regs 0 +# endif +# ifndef cpu_has_64bit_addresses +# define cpu_has_64bit_addresses 0 +# endif +#endif + +#ifdef CONFIG_64BIT +# ifndef cpu_has_nofpuex +# define cpu_has_nofpuex 0 +# endif +# ifndef cpu_has_64bits +# define cpu_has_64bits 1 +# endif +# ifndef cpu_has_64bit_zero_reg +# define cpu_has_64bit_zero_reg 1 +# endif +# ifndef cpu_has_64bit_gp_regs +# define cpu_has_64bit_gp_regs 1 +# endif +# ifndef cpu_has_64bit_addresses +# define cpu_has_64bit_addresses 1 +# endif +#endif + +#if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint) +# define cpu_has_vint (cpu_data[0].options & MIPS_CPU_VINT) +#elif !defined(cpu_has_vint) +# define cpu_has_vint 0 +#endif + +#if defined(CONFIG_CPU_MIPSR2_IRQ_EI) && !defined(cpu_has_veic) +# define cpu_has_veic (cpu_data[0].options & MIPS_CPU_VEIC) +#elif !defined(cpu_has_veic) +# define cpu_has_veic 0 +#endif + +#ifndef cpu_has_inclusive_pcaches +#define cpu_has_inclusive_pcaches (cpu_data[0].options & MIPS_CPU_INCLUSIVE_CACHES) +#endif + +#ifndef cpu_dcache_line_size +#define cpu_dcache_line_size() cpu_data[0].dcache.linesz +#endif +#ifndef cpu_icache_line_size +#define cpu_icache_line_size() cpu_data[0].icache.linesz +#endif +#ifndef cpu_scache_line_size +#define cpu_scache_line_size() cpu_data[0].scache.linesz +#endif + +#endif /* __ASM_CPU_FEATURES_H */ diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h new file mode 100644 index 000000000000..744cd8fb107f --- /dev/null +++ b/arch/mips/include/asm/cpu-info.h @@ -0,0 +1,90 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 Waldorf GMBH + * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle + * Copyright (C) 1996 Paul M. Antoine + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2004 Maciej W. Rozycki + */ +#ifndef __ASM_CPU_INFO_H +#define __ASM_CPU_INFO_H + +#include <linux/types.h> + +#include <asm/cache.h> + +/* + * Descriptor for a cache + */ +struct cache_desc { + unsigned int waysize; /* Bytes per way */ + unsigned short sets; /* Number of lines per set */ + unsigned char ways; /* Number of ways */ + unsigned char linesz; /* Size of line in bytes */ + unsigned char waybit; /* Bits to select in a cache set */ + unsigned char flags; /* Flags describing cache properties */ +}; + +/* + * Flag definitions + */ +#define MIPS_CACHE_NOT_PRESENT 0x00000001 +#define MIPS_CACHE_VTAG 0x00000002 /* Virtually tagged cache */ +#define MIPS_CACHE_ALIASES 0x00000004 /* Cache could have aliases */ +#define MIPS_CACHE_IC_F_DC 0x00000008 /* Ic can refill from D-cache */ +#define MIPS_IC_SNOOPS_REMOTE 0x00000010 /* Ic snoops remote stores */ +#define MIPS_CACHE_PINDEX 0x00000020 /* Physically indexed cache */ + +struct cpuinfo_mips { + unsigned long udelay_val; + unsigned long asid_cache; + + /* + * Capability and feature descriptor structure for MIPS CPU + */ + unsigned long options; + unsigned long ases; + unsigned int processor_id; + unsigned int fpu_id; + unsigned int cputype; + int isa_level; + int tlbsize; + struct cache_desc icache; /* Primary I-cache */ + struct cache_desc dcache; /* Primary D or combined I/D cache */ + struct cache_desc scache; /* Secondary cache */ + struct cache_desc tcache; /* Tertiary/split secondary cache */ + int srsets; /* Shadow register sets */ + int core; /* physical core number */ +#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC) + /* + * In the MIPS MT "SMTC" model, each TC is considered + * to be a "CPU" for the purposes of scheduling, but + * exception resources, ASID spaces, etc, are common + * to all TCs within the same VPE. + */ + int vpe_id; /* Virtual Processor number */ +#endif +#ifdef CONFIG_MIPS_MT_SMTC + int tc_id; /* Thread Context number */ +#endif + void *data; /* Additional data */ + unsigned int watch_reg_count; /* Number that exist */ + unsigned int watch_reg_use_cnt; /* Usable by ptrace */ +#define NUM_WATCH_REGS 4 + u16 watch_reg_masks[NUM_WATCH_REGS]; +} __attribute__((aligned(SMP_CACHE_BYTES))); + +extern struct cpuinfo_mips cpu_data[]; +#define current_cpu_data cpu_data[smp_processor_id()] +#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] + +extern void cpu_probe(void); +extern void cpu_report(void); + +extern const char *__cpu_name[]; +#define cpu_name_string() __cpu_name[smp_processor_id()] + +#endif /* __ASM_CPU_INFO_H */ diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h new file mode 100644 index 000000000000..229a786101d9 --- /dev/null +++ b/arch/mips/include/asm/cpu.h @@ -0,0 +1,267 @@ +/* + * cpu.h: Values of the PRId register used to match up + * various MIPS cpu types. + * + * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 2004 Maciej W. Rozycki + */ +#ifndef _ASM_CPU_H +#define _ASM_CPU_H + +/* Assigned Company values for bits 23:16 of the PRId Register + (CP0 register 15, select 0). As of the MIPS32 and MIPS64 specs from + MTI, the PRId register is defined in this (backwards compatible) + way: + + +----------------+----------------+----------------+----------------+ + | Company Options| Company ID | Processor ID | Revision | + +----------------+----------------+----------------+----------------+ + 31 24 23 16 15 8 7 + + I don't have docs for all the previous processors, but my impression is + that bits 16-23 have been 0 for all MIPS processors before the MIPS32/64 + spec. +*/ + +#define PRID_COMP_LEGACY 0x000000 +#define PRID_COMP_MIPS 0x010000 +#define PRID_COMP_BROADCOM 0x020000 +#define PRID_COMP_ALCHEMY 0x030000 +#define PRID_COMP_SIBYTE 0x040000 +#define PRID_COMP_SANDCRAFT 0x050000 +#define PRID_COMP_NXP 0x060000 +#define PRID_COMP_TOSHIBA 0x070000 +#define PRID_COMP_LSI 0x080000 +#define PRID_COMP_LEXRA 0x0b0000 + + +/* + * Assigned values for the product ID register. In order to detect a + * certain CPU type exactly eventually additional registers may need to + * be examined. These are valid when 23:16 == PRID_COMP_LEGACY + */ +#define PRID_IMP_R2000 0x0100 +#define PRID_IMP_AU1_REV1 0x0100 +#define PRID_IMP_AU1_REV2 0x0200 +#define PRID_IMP_R3000 0x0200 /* Same as R2000A */ +#define PRID_IMP_R6000 0x0300 /* Same as R3000A */ +#define PRID_IMP_R4000 0x0400 +#define PRID_IMP_R6000A 0x0600 +#define PRID_IMP_R10000 0x0900 +#define PRID_IMP_R4300 0x0b00 +#define PRID_IMP_VR41XX 0x0c00 +#define PRID_IMP_R12000 0x0e00 +#define PRID_IMP_R14000 0x0f00 +#define PRID_IMP_R8000 0x1000 +#define PRID_IMP_PR4450 0x1200 +#define PRID_IMP_R4600 0x2000 +#define PRID_IMP_R4700 0x2100 +#define PRID_IMP_TX39 0x2200 +#define PRID_IMP_R4640 0x2200 +#define PRID_IMP_R4650 0x2200 /* Same as R4640 */ +#define PRID_IMP_R5000 0x2300 +#define PRID_IMP_TX49 0x2d00 +#define PRID_IMP_SONIC 0x2400 +#define PRID_IMP_MAGIC 0x2500 +#define PRID_IMP_RM7000 0x2700 +#define PRID_IMP_NEVADA 0x2800 /* RM5260 ??? */ +#define PRID_IMP_RM9000 0x3400 +#define PRID_IMP_LOONGSON1 0x4200 +#define PRID_IMP_R5432 0x5400 +#define PRID_IMP_R5500 0x5500 +#define PRID_IMP_LOONGSON2 0x6300 + +#define PRID_IMP_UNKNOWN 0xff00 + +/* + * These are the PRID's for when 23:16 == PRID_COMP_MIPS + */ + +#define PRID_IMP_4KC 0x8000 +#define PRID_IMP_5KC 0x8100 +#define PRID_IMP_20KC 0x8200 +#define PRID_IMP_4KEC 0x8400 +#define PRID_IMP_4KSC 0x8600 +#define PRID_IMP_25KF 0x8800 +#define PRID_IMP_5KE 0x8900 +#define PRID_IMP_4KECR2 0x9000 +#define PRID_IMP_4KEMPR2 0x9100 +#define PRID_IMP_4KSD 0x9200 +#define PRID_IMP_24K 0x9300 +#define PRID_IMP_34K 0x9500 +#define PRID_IMP_24KE 0x9600 +#define PRID_IMP_74K 0x9700 +#define PRID_IMP_1004K 0x9900 + +/* + * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE + */ + +#define PRID_IMP_SB1 0x0100 +#define PRID_IMP_SB1A 0x1100 + +/* + * These are the PRID's for when 23:16 == PRID_COMP_SANDCRAFT + */ + +#define PRID_IMP_SR71000 0x0400 + +/* + * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM + */ + +#define PRID_IMP_BCM4710 0x4000 +#define PRID_IMP_BCM3302 0x9000 + +/* + * Definitions for 7:0 on legacy processors + */ + +#define PRID_REV_MASK 0x00ff + +#define PRID_REV_TX4927 0x0022 +#define PRID_REV_TX4937 0x0030 +#define PRID_REV_R4400 0x0040 +#define PRID_REV_R3000A 0x0030 +#define PRID_REV_R3000 0x0020 +#define PRID_REV_R2000A 0x0010 +#define PRID_REV_TX3912 0x0010 +#define PRID_REV_TX3922 0x0030 +#define PRID_REV_TX3927 0x0040 +#define PRID_REV_VR4111 0x0050 +#define PRID_REV_VR4181 0x0050 /* Same as VR4111 */ +#define PRID_REV_VR4121 0x0060 +#define PRID_REV_VR4122 0x0070 +#define PRID_REV_VR4181A 0x0070 /* Same as VR4122 */ +#define PRID_REV_VR4130 0x0080 +#define PRID_REV_34K_V1_0_2 0x0022 + +/* + * Older processors used to encode processor version and revision in two + * 4-bit bitfields, the 4K seems to simply count up and even newer MTI cores + * have switched to use the 8-bits as 3:3:2 bitfield with the last field as + * the patch number. *ARGH* + */ +#define PRID_REV_ENCODE_44(ver, rev) \ + ((ver) << 4 | (rev)) +#define PRID_REV_ENCODE_332(ver, rev, patch) \ + ((ver) << 5 | (rev) << 2 | (patch)) + +/* + * FPU implementation/revision register (CP1 control register 0). + * + * +---------------------------------+----------------+----------------+ + * | 0 | Implementation | Revision | + * +---------------------------------+----------------+----------------+ + * 31 16 15 8 7 0 + */ + +#define FPIR_IMP_NONE 0x0000 + +enum cpu_type_enum { + CPU_UNKNOWN, + + /* + * R2000 class processors + */ + CPU_R2000, CPU_R3000, CPU_R3000A, CPU_R3041, CPU_R3051, CPU_R3052, + CPU_R3081, CPU_R3081E, + + /* + * R6000 class processors + */ + CPU_R6000, CPU_R6000A, + + /* + * R4000 class processors + */ + CPU_R4000PC, CPU_R4000SC, CPU_R4000MC, CPU_R4200, CPU_R4300, CPU_R4310, + CPU_R4400PC, CPU_R4400SC, CPU_R4400MC, CPU_R4600, CPU_R4640, CPU_R4650, + CPU_R4700, CPU_R5000, CPU_R5000A, CPU_R5500, CPU_NEVADA, CPU_R5432, + CPU_R10000, CPU_R12000, CPU_R14000, CPU_VR41XX, CPU_VR4111, CPU_VR4121, + CPU_VR4122, CPU_VR4131, CPU_VR4133, CPU_VR4181, CPU_VR4181A, CPU_RM7000, + CPU_SR71000, CPU_RM9000, CPU_TX49XX, + + /* + * R8000 class processors + */ + CPU_R8000, + + /* + * TX3900 class processors + */ + CPU_TX3912, CPU_TX3922, CPU_TX3927, + + /* + * MIPS32 class processors + */ + CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K, + CPU_AU1000, CPU_AU1100, CPU_AU1200, CPU_AU1210, CPU_AU1250, CPU_AU1500, + CPU_AU1550, CPU_PR4450, CPU_BCM3302, CPU_BCM4710, + + /* + * MIPS64 class processors + */ + CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2, + + CPU_LAST +}; + + +/* + * ISA Level encodings + * + */ +#define MIPS_CPU_ISA_I 0x00000001 +#define MIPS_CPU_ISA_II 0x00000002 +#define MIPS_CPU_ISA_III 0x00000004 +#define MIPS_CPU_ISA_IV 0x00000008 +#define MIPS_CPU_ISA_V 0x00000010 +#define MIPS_CPU_ISA_M32R1 0x00000020 +#define MIPS_CPU_ISA_M32R2 0x00000040 +#define MIPS_CPU_ISA_M64R1 0x00000080 +#define MIPS_CPU_ISA_M64R2 0x00000100 + +#define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | \ + MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 ) +#define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \ + MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2) + +/* + * CPU Option encodings + */ +#define MIPS_CPU_TLB 0x00000001 /* CPU has TLB */ +#define MIPS_CPU_4KEX 0x00000002 /* "R4K" exception model */ +#define MIPS_CPU_3K_CACHE 0x00000004 /* R3000-style caches */ +#define MIPS_CPU_4K_CACHE 0x00000008 /* R4000-style caches */ +#define MIPS_CPU_TX39_CACHE 0x00000010 /* TX3900-style caches */ +#define MIPS_CPU_FPU 0x00000020 /* CPU has FPU */ +#define MIPS_CPU_32FPR 0x00000040 /* 32 dbl. prec. FP registers */ +#define MIPS_CPU_COUNTER 0x00000080 /* Cycle count/compare */ +#define MIPS_CPU_WATCH 0x00000100 /* watchpoint registers */ +#define MIPS_CPU_DIVEC 0x00000200 /* dedicated interrupt vector */ +#define MIPS_CPU_VCE 0x00000400 /* virt. coherence conflict possible */ +#define MIPS_CPU_CACHE_CDEX_P 0x00000800 /* Create_Dirty_Exclusive CACHE op */ +#define MIPS_CPU_CACHE_CDEX_S 0x00001000 /* ... same for seconary cache ... */ +#define MIPS_CPU_MCHECK 0x00002000 /* Machine check exception */ +#define MIPS_CPU_EJTAG 0x00004000 /* EJTAG exception */ +#define MIPS_CPU_NOFPUEX 0x00008000 /* no FPU exception */ +#define MIPS_CPU_LLSC 0x00010000 /* CPU has ll/sc instructions */ +#define MIPS_CPU_INCLUSIVE_CACHES 0x00020000 /* P-cache subset enforced */ +#define MIPS_CPU_PREFETCH 0x00040000 /* CPU has usable prefetch */ +#define MIPS_CPU_VINT 0x00080000 /* CPU supports MIPSR2 vectored interrupts */ +#define MIPS_CPU_VEIC 0x00100000 /* CPU supports MIPSR2 external interrupt controller mode */ +#define MIPS_CPU_ULRI 0x00200000 /* CPU has ULRI feature */ + +/* + * CPU ASE encodings + */ +#define MIPS_ASE_MIPS16 0x00000001 /* code compression */ +#define MIPS_ASE_MDMX 0x00000002 /* MIPS digital media extension */ +#define MIPS_ASE_MIPS3D 0x00000004 /* MIPS-3D */ +#define MIPS_ASE_SMARTMIPS 0x00000008 /* SmartMIPS */ +#define MIPS_ASE_DSP 0x00000010 /* Signal Processing ASE */ +#define MIPS_ASE_MIPSMT 0x00000020 /* CPU supports MIPS MT */ + + +#endif /* _ASM_CPU_H */ diff --git a/arch/mips/include/asm/cputime.h b/arch/mips/include/asm/cputime.h new file mode 100644 index 000000000000..c00eacbdd979 --- /dev/null +++ b/arch/mips/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __MIPS_CPUTIME_H +#define __MIPS_CPUTIME_H + +#include <asm-generic/cputime.h> + +#endif /* __MIPS_CPUTIME_H */ diff --git a/arch/mips/include/asm/current.h b/arch/mips/include/asm/current.h new file mode 100644 index 000000000000..559db66b9790 --- /dev/null +++ b/arch/mips/include/asm/current.h @@ -0,0 +1,23 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2002 Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_CURRENT_H +#define _ASM_CURRENT_H + +#include <linux/thread_info.h> + +struct task_struct; + +static inline struct task_struct * get_current(void) +{ + return current_thread_info()->task; +} + +#define current get_current() + +#endif /* _ASM_CURRENT_H */ diff --git a/arch/mips/include/asm/debug.h b/arch/mips/include/asm/debug.h new file mode 100644 index 000000000000..1fd5a2b39445 --- /dev/null +++ b/arch/mips/include/asm/debug.h @@ -0,0 +1,48 @@ +/* + * Debug macros for run-time debugging. + * Turned on/off with CONFIG_RUNTIME_DEBUG option. + * + * Copyright (C) 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef _ASM_DEBUG_H +#define _ASM_DEBUG_H + + +/* + * run-time macros for catching spurious errors. Eable CONFIG_RUNTIME_DEBUG in + * kernel hacking config menu to use them. + * + * Use them as run-time debugging aid. NEVER USE THEM AS ERROR HANDLING CODE!!! + */ + +#ifdef CONFIG_RUNTIME_DEBUG + +#include <linux/kernel.h> + +#define db_assert(x) if (!(x)) { \ + panic("assertion failed at %s:%d: %s", __FILE__, __LINE__, #x); } +#define db_warn(x) if (!(x)) { \ + printk(KERN_WARNING "warning at %s:%d: %s", __FILE__, __LINE__, #x); } +#define db_verify(x, y) db_assert(x y) +#define db_verify_warn(x, y) db_warn(x y) +#define db_run(x) do { x; } while (0) + +#else + +#define db_assert(x) +#define db_warn(x) +#define db_verify(x, y) x +#define db_verify_warn(x, y) x +#define db_run(x) + +#endif + +#endif /* _ASM_DEBUG_H */ diff --git a/arch/mips/include/asm/dec/ecc.h b/arch/mips/include/asm/dec/ecc.h new file mode 100644 index 000000000000..707ffdbc9add --- /dev/null +++ b/arch/mips/include/asm/dec/ecc.h @@ -0,0 +1,55 @@ +/* + * include/asm-mips/dec/ecc.h + * + * ECC handling logic definitions common to DECstation/DECsystem + * 5000/200 (KN02), 5000/240 (KN03), 5000/260 (KN05) and + * DECsystem 5900 (KN03), 5900/260 (KN05) systems. + * + * Copyright (C) 2003 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MIPS_DEC_ECC_H +#define __ASM_MIPS_DEC_ECC_H + +/* + * Error Address Register bits. + * The register is r/wc -- any write clears it. + */ +#define KN0X_EAR_VALID (1<<31) /* error data valid, bus IRQ */ +#define KN0X_EAR_CPU (1<<30) /* CPU/DMA transaction */ +#define KN0X_EAR_WRITE (1<<29) /* write/read transaction */ +#define KN0X_EAR_ECCERR (1<<28) /* ECC/timeout or overrun */ +#define KN0X_EAR_RES_27 (1<<27) /* unused */ +#define KN0X_EAR_ADDRESS (0x7ffffff<<0) /* address involved */ + +/* + * Error Syndrome Register bits. + * The register is frozen when EAR.VALID is set, otherwise it records bits + * from the last memory read. The register is r/wc -- any write clears it. + */ +#define KN0X_ESR_VLDHI (1<<31) /* error data valid hi word */ +#define KN0X_ESR_CHKHI (0x7f<<24) /* check bits read from mem */ +#define KN0X_ESR_SNGHI (1<<23) /* single/double bit error */ +#define KN0X_ESR_SYNHI (0x7f<<16) /* syndrome from ECC logic */ +#define KN0X_ESR_VLDLO (1<<15) /* error data valid lo word */ +#define KN0X_ESR_CHKLO (0x7f<<8) /* check bits read from mem */ +#define KN0X_ESR_SNGLO (1<<7) /* single/double bit error */ +#define KN0X_ESR_SYNLO (0x7f<<0) /* syndrome from ECC logic */ + + +#ifndef __ASSEMBLY__ + +#include <linux/interrupt.h> + +struct pt_regs; + +extern void dec_ecc_be_init(void); +extern int dec_ecc_be_handler(struct pt_regs *regs, int is_fixup); +extern irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id); +#endif + +#endif /* __ASM_MIPS_DEC_ECC_H */ diff --git a/arch/mips/include/asm/dec/interrupts.h b/arch/mips/include/asm/dec/interrupts.h new file mode 100644 index 000000000000..e10d341067c8 --- /dev/null +++ b/arch/mips/include/asm/dec/interrupts.h @@ -0,0 +1,126 @@ +/* + * Miscellaneous definitions used to initialise the interrupt vector table + * with the machine-specific interrupt routines. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997 by Paul M. Antoine. + * reworked 1998 by Harald Koerfgen. + * Copyright (C) 2001, 2002, 2003 Maciej W. Rozycki + */ + +#ifndef __ASM_DEC_INTERRUPTS_H +#define __ASM_DEC_INTERRUPTS_H + +#include <irq.h> +#include <asm/mipsregs.h> + + +/* + * The list of possible system devices which provide an + * interrupt. Not all devices exist on a given system. + */ +#define DEC_IRQ_CASCADE 0 /* cascade from CSR or I/O ASIC */ + +/* Ordinary interrupts */ +#define DEC_IRQ_AB_RECV 1 /* ACCESS.bus receive */ +#define DEC_IRQ_AB_XMIT 2 /* ACCESS.bus transmit */ +#define DEC_IRQ_DZ11 3 /* DZ11 (DC7085) serial */ +#define DEC_IRQ_ASC 4 /* ASC (NCR53C94) SCSI */ +#define DEC_IRQ_FLOPPY 5 /* 82077 FDC */ +#define DEC_IRQ_FPU 6 /* R3k FPU */ +#define DEC_IRQ_HALT 7 /* HALT button or from ACCESS.Bus */ +#define DEC_IRQ_ISDN 8 /* Am79C30A ISDN */ +#define DEC_IRQ_LANCE 9 /* LANCE (Am7990) Ethernet */ +#define DEC_IRQ_BUS 10 /* memory, I/O bus read/write errors */ +#define DEC_IRQ_PSU 11 /* power supply unit warning */ +#define DEC_IRQ_RTC 12 /* DS1287 RTC */ +#define DEC_IRQ_SCC0 13 /* SCC (Z85C30) serial #0 */ +#define DEC_IRQ_SCC1 14 /* SCC (Z85C30) serial #1 */ +#define DEC_IRQ_SII 15 /* SII (DC7061) SCSI */ +#define DEC_IRQ_TC0 16 /* TURBOchannel slot #0 */ +#define DEC_IRQ_TC1 17 /* TURBOchannel slot #1 */ +#define DEC_IRQ_TC2 18 /* TURBOchannel slot #2 */ +#define DEC_IRQ_TIMER 19 /* ARC periodic timer */ +#define DEC_IRQ_VIDEO 20 /* framebuffer */ + +/* I/O ASIC DMA interrupts */ +#define DEC_IRQ_ASC_MERR 21 /* ASC memory read error */ +#define DEC_IRQ_ASC_ERR 22 /* ASC page overrun */ +#define DEC_IRQ_ASC_DMA 23 /* ASC buffer pointer loaded */ +#define DEC_IRQ_FLOPPY_ERR 24 /* FDC error */ +#define DEC_IRQ_ISDN_ERR 25 /* ISDN memory read/overrun error */ +#define DEC_IRQ_ISDN_RXDMA 26 /* ISDN recv buffer pointer loaded */ +#define DEC_IRQ_ISDN_TXDMA 27 /* ISDN xmit buffer pointer loaded */ +#define DEC_IRQ_LANCE_MERR 28 /* LANCE memory read error */ +#define DEC_IRQ_SCC0A_RXERR 29 /* SCC0A (printer) receive overrun */ +#define DEC_IRQ_SCC0A_RXDMA 30 /* SCC0A receive half page */ +#define DEC_IRQ_SCC0A_TXERR 31 /* SCC0A xmit memory read/overrun */ +#define DEC_IRQ_SCC0A_TXDMA 32 /* SCC0A transmit page end */ +#define DEC_IRQ_AB_RXERR 33 /* ACCESS.bus receive overrun */ +#define DEC_IRQ_AB_RXDMA 34 /* ACCESS.bus receive half page */ +#define DEC_IRQ_AB_TXERR 35 /* ACCESS.bus xmit memory read/ovrn */ +#define DEC_IRQ_AB_TXDMA 36 /* ACCESS.bus transmit page end */ +#define DEC_IRQ_SCC1A_RXERR 37 /* SCC1A (modem) receive overrun */ +#define DEC_IRQ_SCC1A_RXDMA 38 /* SCC1A receive half page */ +#define DEC_IRQ_SCC1A_TXERR 39 /* SCC1A xmit memory read/overrun */ +#define DEC_IRQ_SCC1A_TXDMA 40 /* SCC1A transmit page end */ + +/* TC5 & TC6 are virtual slots for KN02's onboard devices */ +#define DEC_IRQ_TC5 DEC_IRQ_ASC /* virtual PMAZ-AA */ +#define DEC_IRQ_TC6 DEC_IRQ_LANCE /* virtual PMAD-AA */ + +#define DEC_NR_INTS 41 + + +/* Largest of cpu mask_nr tables. */ +#define DEC_MAX_CPU_INTS 6 +/* Largest of asic mask_nr tables. */ +#define DEC_MAX_ASIC_INTS 9 + + +/* + * CPU interrupt bits common to all systems. + */ +#define DEC_CPU_INR_FPU 7 /* R3k FPU */ +#define DEC_CPU_INR_SW1 1 /* software #1 */ +#define DEC_CPU_INR_SW0 0 /* software #0 */ + +#define DEC_CPU_IRQ_BASE MIPS_CPU_IRQ_BASE /* first IRQ assigned to CPU */ + +#define DEC_CPU_IRQ_NR(n) ((n) + DEC_CPU_IRQ_BASE) +#define DEC_CPU_IRQ_MASK(n) (1 << ((n) + CAUSEB_IP)) +#define DEC_CPU_IRQ_ALL (0xff << CAUSEB_IP) + + +#ifndef __ASSEMBLY__ + +/* + * Interrupt table structures to hide differences between systems. + */ +typedef union { int i; void *p; } int_ptr; +extern int dec_interrupt[DEC_NR_INTS]; +extern int_ptr cpu_mask_nr_tbl[DEC_MAX_CPU_INTS][2]; +extern int_ptr asic_mask_nr_tbl[DEC_MAX_ASIC_INTS][2]; +extern int cpu_fpu_mask; + + +/* + * Common interrupt routine prototypes for all DECStations + */ +extern void kn02_io_int(void); +extern void kn02xa_io_int(void); +extern void kn03_io_int(void); +extern void asic_dma_int(void); +extern void asic_all_int(void); +extern void kn02_all_int(void); +extern void cpu_all_int(void); + +extern void dec_intr_unimplemented(void); +extern void asic_intr_unimplemented(void); + +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/mips/include/asm/dec/ioasic.h b/arch/mips/include/asm/dec/ioasic.h new file mode 100644 index 000000000000..98badd6bf22d --- /dev/null +++ b/arch/mips/include/asm/dec/ioasic.h @@ -0,0 +1,38 @@ +/* + * include/asm-mips/dec/ioasic.h + * + * DEC I/O ASIC access operations. + * + * Copyright (C) 2000, 2002, 2003 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __ASM_DEC_IOASIC_H +#define __ASM_DEC_IOASIC_H + +#include <linux/spinlock.h> +#include <linux/types.h> + +extern spinlock_t ioasic_ssr_lock; + +extern volatile u32 *ioasic_base; + +static inline void ioasic_write(unsigned int reg, u32 v) +{ + ioasic_base[reg / 4] = v; +} + +static inline u32 ioasic_read(unsigned int reg) +{ + return ioasic_base[reg / 4]; +} + +extern void init_ioasic_irqs(int base); + +extern void dec_ioasic_clocksource_init(void); + +#endif /* __ASM_DEC_IOASIC_H */ diff --git a/arch/mips/include/asm/dec/ioasic_addrs.h b/arch/mips/include/asm/dec/ioasic_addrs.h new file mode 100644 index 000000000000..4cbc1f8a1129 --- /dev/null +++ b/arch/mips/include/asm/dec/ioasic_addrs.h @@ -0,0 +1,152 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Definitions for the address map in the JUNKIO Asic + * + * Created with Information from: + * + * "DEC 3000 300/400/500/600/700/800/900 AXP Models System Programmer's Manual" + * + * and the Mach Sources + * + * Copyright (C) 199x the Anonymous + * Copyright (C) 2002, 2003 Maciej W. Rozycki + */ + +#ifndef __ASM_MIPS_DEC_IOASIC_ADDRS_H +#define __ASM_MIPS_DEC_IOASIC_ADDRS_H + +#define IOASIC_SLOT_SIZE 0x00040000 + +/* + * Address ranges decoded by the I/O ASIC for onboard devices. + */ +#define IOASIC_SYS_ROM (0*IOASIC_SLOT_SIZE) /* system board ROM */ +#define IOASIC_IOCTL (1*IOASIC_SLOT_SIZE) /* I/O ASIC */ +#define IOASIC_ESAR (2*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */ +#define IOASIC_LANCE (3*IOASIC_SLOT_SIZE) /* LANCE Ethernet */ +#define IOASIC_SCC0 (4*IOASIC_SLOT_SIZE) /* SCC #0 */ +#define IOASIC_VDAC_HI (5*IOASIC_SLOT_SIZE) /* VDAC (maxine) */ +#define IOASIC_SCC1 (6*IOASIC_SLOT_SIZE) /* SCC #1 (3min, 3max+) */ +#define IOASIC_VDAC_LO (7*IOASIC_SLOT_SIZE) /* VDAC (maxine) */ +#define IOASIC_TOY (8*IOASIC_SLOT_SIZE) /* RTC */ +#define IOASIC_ISDN (9*IOASIC_SLOT_SIZE) /* ISDN (maxine) */ +#define IOASIC_ERRADDR (9*IOASIC_SLOT_SIZE) /* bus error address (3max+) */ +#define IOASIC_CHKSYN (10*IOASIC_SLOT_SIZE) /* ECC syndrome (3max+) */ +#define IOASIC_ACC_BUS (10*IOASIC_SLOT_SIZE) /* ACCESS.bus (maxine) */ +#define IOASIC_MCR (11*IOASIC_SLOT_SIZE) /* memory control (3max+) */ +#define IOASIC_FLOPPY (11*IOASIC_SLOT_SIZE) /* FDC (maxine) */ +#define IOASIC_SCSI (12*IOASIC_SLOT_SIZE) /* ASC SCSI */ +#define IOASIC_FDC_DMA (13*IOASIC_SLOT_SIZE) /* FDC DMA (maxine) */ +#define IOASIC_SCSI_DMA (14*IOASIC_SLOT_SIZE) /* ??? */ +#define IOASIC_RES_15 (15*IOASIC_SLOT_SIZE) /* unused? */ + + +/* + * Offsets for I/O ASIC registers + * (relative to (dec_kn_slot_base + IOASIC_IOCTL)). + */ + /* all systems */ +#define IO_REG_SCSI_DMA_P 0x00 /* SCSI DMA Pointer */ +#define IO_REG_SCSI_DMA_BP 0x10 /* SCSI DMA Buffer Pointer */ +#define IO_REG_LANCE_DMA_P 0x20 /* LANCE DMA Pointer */ +#define IO_REG_SCC0A_T_DMA_P 0x30 /* SCC0A Transmit DMA Pointer */ +#define IO_REG_SCC0A_R_DMA_P 0x40 /* SCC0A Receive DMA Pointer */ + + /* except Maxine */ +#define IO_REG_SCC1A_T_DMA_P 0x50 /* SCC1A Transmit DMA Pointer */ +#define IO_REG_SCC1A_R_DMA_P 0x60 /* SCC1A Receive DMA Pointer */ + + /* Maxine */ +#define IO_REG_AB_T_DMA_P 0x50 /* ACCESS.bus Transmit DMA Pointer */ +#define IO_REG_AB_R_DMA_P 0x60 /* ACCESS.bus Receive DMA Pointer */ +#define IO_REG_FLOPPY_DMA_P 0x70 /* Floppy DMA Pointer */ +#define IO_REG_ISDN_T_DMA_P 0x80 /* ISDN Transmit DMA Pointer */ +#define IO_REG_ISDN_T_DMA_BP 0x90 /* ISDN Transmit DMA Buffer Pointer */ +#define IO_REG_ISDN_R_DMA_P 0xa0 /* ISDN Receive DMA Pointer */ +#define IO_REG_ISDN_R_DMA_BP 0xb0 /* ISDN Receive DMA Buffer Pointer */ + + /* all systems */ +#define IO_REG_DATA_0 0xc0 /* System Data Buffer 0 */ +#define IO_REG_DATA_1 0xd0 /* System Data Buffer 1 */ +#define IO_REG_DATA_2 0xe0 /* System Data Buffer 2 */ +#define IO_REG_DATA_3 0xf0 /* System Data Buffer 3 */ + + /* all systems */ +#define IO_REG_SSR 0x100 /* System Support Register */ +#define IO_REG_SIR 0x110 /* System Interrupt Register */ +#define IO_REG_SIMR 0x120 /* System Interrupt Mask Reg. */ +#define IO_REG_SAR 0x130 /* System Address Register */ + + /* Maxine */ +#define IO_REG_ISDN_T_DATA 0x140 /* ISDN Xmit Data Register */ +#define IO_REG_ISDN_R_DATA 0x150 /* ISDN Receive Data Register */ + + /* all systems */ +#define IO_REG_LANCE_SLOT 0x160 /* LANCE I/O Slot Register */ +#define IO_REG_SCSI_SLOT 0x170 /* SCSI Slot Register */ +#define IO_REG_SCC0A_SLOT 0x180 /* SCC0A DMA Slot Register */ + + /* except Maxine */ +#define IO_REG_SCC1A_SLOT 0x190 /* SCC1A DMA Slot Register */ + + /* Maxine */ +#define IO_REG_AB_SLOT 0x190 /* ACCESS.bus DMA Slot Register */ +#define IO_REG_FLOPPY_SLOT 0x1a0 /* Floppy Slot Register */ + + /* all systems */ +#define IO_REG_SCSI_SCR 0x1b0 /* SCSI Partial-Word DMA Control */ +#define IO_REG_SCSI_SDR0 0x1c0 /* SCSI DMA Partial Word 0 */ +#define IO_REG_SCSI_SDR1 0x1d0 /* SCSI DMA Partial Word 1 */ +#define IO_REG_FCTR 0x1e0 /* Free-Running Counter */ +#define IO_REG_RES_31 0x1f0 /* unused */ + + +/* + * The upper 16 bits of the System Support Register are a part of the + * I/O ASIC's internal DMA engine and thus are common to all I/O ASIC + * machines. The exception is the Maxine, which makes use of the + * FLOPPY and ISDN bits (otherwise unused) and has a different SCC + * wiring. + */ + /* all systems */ +#define IO_SSR_SCC0A_TX_DMA_EN (1<<31) /* SCC0A transmit DMA enable */ +#define IO_SSR_SCC0A_RX_DMA_EN (1<<30) /* SCC0A receive DMA enable */ +#define IO_SSR_RES_27 (1<<27) /* unused */ +#define IO_SSR_RES_26 (1<<26) /* unused */ +#define IO_SSR_RES_25 (1<<25) /* unused */ +#define IO_SSR_RES_24 (1<<24) /* unused */ +#define IO_SSR_RES_23 (1<<23) /* unused */ +#define IO_SSR_SCSI_DMA_DIR (1<<18) /* SCSI DMA direction */ +#define IO_SSR_SCSI_DMA_EN (1<<17) /* SCSI DMA enable */ +#define IO_SSR_LANCE_DMA_EN (1<<16) /* LANCE DMA enable */ + + /* except Maxine */ +#define IO_SSR_SCC1A_TX_DMA_EN (1<<29) /* SCC1A transmit DMA enable */ +#define IO_SSR_SCC1A_RX_DMA_EN (1<<28) /* SCC1A receive DMA enable */ +#define IO_SSR_RES_22 (1<<22) /* unused */ +#define IO_SSR_RES_21 (1<<21) /* unused */ +#define IO_SSR_RES_20 (1<<20) /* unused */ +#define IO_SSR_RES_19 (1<<19) /* unused */ + + /* Maxine */ +#define IO_SSR_AB_TX_DMA_EN (1<<29) /* ACCESS.bus xmit DMA enable */ +#define IO_SSR_AB_RX_DMA_EN (1<<28) /* ACCESS.bus recv DMA enable */ +#define IO_SSR_FLOPPY_DMA_DIR (1<<22) /* Floppy DMA direction */ +#define IO_SSR_FLOPPY_DMA_EN (1<<21) /* Floppy DMA enable */ +#define IO_SSR_ISDN_TX_DMA_EN (1<<20) /* ISDN transmit DMA enable */ +#define IO_SSR_ISDN_RX_DMA_EN (1<<19) /* ISDN receive DMA enable */ + +/* + * The lower 16 bits are system-specific. Bits 15,11:8 are common and + * defined here. The rest is defined in system-specific headers. + */ +#define KN0X_IO_SSR_DIAGDN (1<<15) /* diagnostic jumper */ +#define KN0X_IO_SSR_SCC_RST (1<<11) /* ~SCC0,1 (Z85C30) reset */ +#define KN0X_IO_SSR_RTC_RST (1<<10) /* ~RTC (DS1287) reset */ +#define KN0X_IO_SSR_ASC_RST (1<<9) /* ~ASC (NCR53C94) reset */ +#define KN0X_IO_SSR_LANCE_RST (1<<8) /* ~LANCE (Am7990) reset */ + +#endif /* __ASM_MIPS_DEC_IOASIC_ADDRS_H */ diff --git a/arch/mips/include/asm/dec/ioasic_ints.h b/arch/mips/include/asm/dec/ioasic_ints.h new file mode 100644 index 000000000000..9aaa9869615f --- /dev/null +++ b/arch/mips/include/asm/dec/ioasic_ints.h @@ -0,0 +1,74 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Definitions for the interrupt related bits in the I/O ASIC + * interrupt status register (and the interrupt mask register, of course) + * + * Created with Information from: + * + * "DEC 3000 300/400/500/600/700/800/900 AXP Models System Programmer's Manual" + * + * and the Mach Sources + * + * Copyright (C) 199x the Anonymous + * Copyright (C) 2002 Maciej W. Rozycki + */ + +#ifndef __ASM_DEC_IOASIC_INTS_H +#define __ASM_DEC_IOASIC_INTS_H + +/* + * The upper 16 bits are a part of the I/O ASIC's internal DMA engine + * and thus are common to all I/O ASIC machines. The exception is + * the Maxine, which makes use of the FLOPPY and ISDN bits (otherwise + * unused) and has a different SCC wiring. + */ + /* all systems */ +#define IO_INR_SCC0A_TXDMA 31 /* SCC0A transmit page end */ +#define IO_INR_SCC0A_TXERR 30 /* SCC0A transmit memory read error */ +#define IO_INR_SCC0A_RXDMA 29 /* SCC0A receive half page */ +#define IO_INR_SCC0A_RXERR 28 /* SCC0A receive overrun */ +#define IO_INR_ASC_DMA 19 /* ASC buffer pointer loaded */ +#define IO_INR_ASC_ERR 18 /* ASC page overrun */ +#define IO_INR_ASC_MERR 17 /* ASC memory read error */ +#define IO_INR_LANCE_MERR 16 /* LANCE memory read error */ + + /* except Maxine */ +#define IO_INR_SCC1A_TXDMA 27 /* SCC1A transmit page end */ +#define IO_INR_SCC1A_TXERR 26 /* SCC1A transmit memory read error */ +#define IO_INR_SCC1A_RXDMA 25 /* SCC1A receive half page */ +#define IO_INR_SCC1A_RXERR 24 /* SCC1A receive overrun */ +#define IO_INR_RES_23 23 /* unused */ +#define IO_INR_RES_22 22 /* unused */ +#define IO_INR_RES_21 21 /* unused */ +#define IO_INR_RES_20 20 /* unused */ + + /* Maxine */ +#define IO_INR_AB_TXDMA 27 /* ACCESS.bus transmit page end */ +#define IO_INR_AB_TXERR 26 /* ACCESS.bus xmit memory read error */ +#define IO_INR_AB_RXDMA 25 /* ACCESS.bus receive half page */ +#define IO_INR_AB_RXERR 24 /* ACCESS.bus receive overrun */ +#define IO_INR_FLOPPY_ERR 23 /* FDC error */ +#define IO_INR_ISDN_TXDMA 22 /* ISDN xmit buffer pointer loaded */ +#define IO_INR_ISDN_RXDMA 21 /* ISDN recv buffer pointer loaded */ +#define IO_INR_ISDN_ERR 20 /* ISDN memory read/overrun error */ + +#define IO_INR_DMA 16 /* first DMA IRQ */ + +/* + * The lower 16 bits are system-specific and thus defined in + * system-specific headers. + */ + + +#define IO_IRQ_BASE 8 /* first IRQ assigned to I/O ASIC */ +#define IO_IRQ_LINES 32 /* number of I/O ASIC interrupts */ + +#define IO_IRQ_NR(n) ((n) + IO_IRQ_BASE) +#define IO_IRQ_MASK(n) (1 << (n)) +#define IO_IRQ_ALL 0x0000ffff +#define IO_IRQ_DMA 0xffff0000 + +#endif /* __ASM_DEC_IOASIC_INTS_H */ diff --git a/arch/mips/include/asm/dec/kn01.h b/arch/mips/include/asm/dec/kn01.h new file mode 100644 index 000000000000..28fa717ac423 --- /dev/null +++ b/arch/mips/include/asm/dec/kn01.h @@ -0,0 +1,90 @@ +/* + * Hardware info about DECstation DS2100/3100 systems (otherwise known as + * pmin/pmax or KN01). + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions + * are by courtesy of Chris Fraser. + * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki + */ +#ifndef __ASM_MIPS_DEC_KN01_H +#define __ASM_MIPS_DEC_KN01_H + +#define KN01_SLOT_BASE 0x10000000 +#define KN01_SLOT_SIZE 0x01000000 + +/* + * Address ranges for devices. + */ +#define KN01_PMASK (0*KN01_SLOT_SIZE) /* color plane mask */ +#define KN01_PCC (1*KN01_SLOT_SIZE) /* PCC (DC503) cursor */ +#define KN01_VDAC (2*KN01_SLOT_SIZE) /* color map */ +#define KN01_RES_3 (3*KN01_SLOT_SIZE) /* unused */ +#define KN01_RES_4 (4*KN01_SLOT_SIZE) /* unused */ +#define KN01_RES_5 (5*KN01_SLOT_SIZE) /* unused */ +#define KN01_RES_6 (6*KN01_SLOT_SIZE) /* unused */ +#define KN01_ERRADDR (7*KN01_SLOT_SIZE) /* write error address */ +#define KN01_LANCE (8*KN01_SLOT_SIZE) /* LANCE (Am7990) Ethernet */ +#define KN01_LANCE_MEM (9*KN01_SLOT_SIZE) /* LANCE buffer memory */ +#define KN01_SII (10*KN01_SLOT_SIZE) /* SII (DC7061) SCSI */ +#define KN01_SII_MEM (11*KN01_SLOT_SIZE) /* SII buffer memory */ +#define KN01_DZ11 (12*KN01_SLOT_SIZE) /* DZ11 (DC7085) serial */ +#define KN01_RTC (13*KN01_SLOT_SIZE) /* DS1287 RTC (bytes #0) */ +#define KN01_ESAR (13*KN01_SLOT_SIZE) /* MAC address (bytes #1) */ +#define KN01_CSR (14*KN01_SLOT_SIZE) /* system ctrl & status reg */ +#define KN01_SYS_ROM (15*KN01_SLOT_SIZE) /* system board ROM */ + + +/* + * Frame buffer memory address. + */ +#define KN01_VFB_MEM 0x0fc00000 + +/* + * CPU interrupt bits. + */ +#define KN01_CPU_INR_BUS 6 /* memory, I/O bus read/write errors */ +#define KN01_CPU_INR_VIDEO 6 /* PCC area detect #2 */ +#define KN01_CPU_INR_RTC 5 /* DS1287 RTC */ +#define KN01_CPU_INR_DZ11 4 /* DZ11 (DC7085) serial */ +#define KN01_CPU_INR_LANCE 3 /* LANCE (Am7990) Ethernet */ +#define KN01_CPU_INR_SII 2 /* SII (DC7061) SCSI */ + + +/* + * System Control & Status Register bits. + */ +#define KN01_CSR_MNFMOD (1<<15) /* MNFMOD manufacturing jumper */ +#define KN01_CSR_STATUS (1<<14) /* self-test result status output */ +#define KN01_CSR_PARDIS (1<<13) /* parity error disable */ +#define KN01_CSR_CRSRTST (1<<12) /* PCC test output */ +#define KN01_CSR_MONO (1<<11) /* mono/color fb SIMM installed */ +#define KN01_CSR_MEMERR (1<<10) /* write timeout error status & ack*/ +#define KN01_CSR_VINT (1<<9) /* PCC area detect #2 status & ack */ +#define KN01_CSR_TXDIS (1<<8) /* DZ11 transmit disable */ +#define KN01_CSR_VBGTRG (1<<2) /* blue DAC voltage over green (r/o) */ +#define KN01_CSR_VRGTRG (1<<1) /* red DAC voltage over green (r/o) */ +#define KN01_CSR_VRGTRB (1<<0) /* red DAC voltage over blue (r/o) */ +#define KN01_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */ + + +#ifndef __ASSEMBLY__ + +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +struct pt_regs; + +extern u16 cached_kn01_csr; +extern spinlock_t kn01_lock; + +extern void dec_kn01_be_init(void); +extern int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup); +extern irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id); +#endif + +#endif /* __ASM_MIPS_DEC_KN01_H */ diff --git a/arch/mips/include/asm/dec/kn02.h b/arch/mips/include/asm/dec/kn02.h new file mode 100644 index 000000000000..93430b5f4724 --- /dev/null +++ b/arch/mips/include/asm/dec/kn02.h @@ -0,0 +1,91 @@ +/* + * Hardware info about DECstation 5000/200 systems (otherwise known as + * 3max or KN02). + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions + * are by courtesy of Chris Fraser. + * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki + */ +#ifndef __ASM_MIPS_DEC_KN02_H +#define __ASM_MIPS_DEC_KN02_H + +#define KN02_SLOT_BASE 0x1fc00000 +#define KN02_SLOT_SIZE 0x00080000 + +/* + * Address ranges decoded by the "system slot" logic for onboard devices. + */ +#define KN02_SYS_ROM (0*KN02_SLOT_SIZE) /* system board ROM */ +#define KN02_RES_1 (1*KN02_SLOT_SIZE) /* unused */ +#define KN02_CHKSYN (2*KN02_SLOT_SIZE) /* ECC syndrome */ +#define KN02_ERRADDR (3*KN02_SLOT_SIZE) /* bus error address */ +#define KN02_DZ11 (4*KN02_SLOT_SIZE) /* DZ11 (DC7085) serial */ +#define KN02_RTC (5*KN02_SLOT_SIZE) /* DS1287 RTC */ +#define KN02_CSR (6*KN02_SLOT_SIZE) /* system ctrl & status reg */ +#define KN02_SYS_ROM_7 (7*KN02_SLOT_SIZE) /* system board ROM (alias) */ + + +/* + * System Control & Status Register bits. + */ +#define KN02_CSR_RES_28 (0xf<<28) /* unused */ +#define KN02_CSR_PSU (1<<27) /* power supply unit warning */ +#define KN02_CSR_NVRAM (1<<26) /* ~NVRAM clear jumper */ +#define KN02_CSR_REFEVEN (1<<25) /* mem refresh bank toggle */ +#define KN02_CSR_NRMOD (1<<24) /* ~NRMOD manufact. jumper */ +#define KN02_CSR_IOINTEN (0xff<<16) /* IRQ mask bits */ +#define KN02_CSR_DIAGCHK (1<<15) /* diagn/norml ECC reads */ +#define KN02_CSR_DIAGGEN (1<<14) /* diagn/norml ECC writes */ +#define KN02_CSR_CORRECT (1<<13) /* ECC correct/check */ +#define KN02_CSR_LEDIAG (1<<12) /* ECC diagn. latch strobe */ +#define KN02_CSR_TXDIS (1<<11) /* DZ11 transmit disable */ +#define KN02_CSR_BNK32M (1<<10) /* 32M/8M stride */ +#define KN02_CSR_DIAGDN (1<<9) /* DIAGDN manufact. jumper */ +#define KN02_CSR_BAUD38 (1<<8) /* DZ11 38/19kbps ext. rate */ +#define KN02_CSR_IOINT (0xff<<0) /* IRQ status bits (r/o) */ +#define KN02_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */ + + +/* + * CPU interrupt bits. + */ +#define KN02_CPU_INR_RES_6 6 /* unused */ +#define KN02_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */ +#define KN02_CPU_INR_RES_4 4 /* unused */ +#define KN02_CPU_INR_RTC 3 /* DS1287 RTC */ +#define KN02_CPU_INR_CASCADE 2 /* CSR cascade */ + +/* + * CSR interrupt bits. + */ +#define KN02_CSR_INR_DZ11 7 /* DZ11 (DC7085) serial */ +#define KN02_CSR_INR_LANCE 6 /* LANCE (Am7990) Ethernet */ +#define KN02_CSR_INR_ASC 5 /* ASC (NCR53C94) SCSI */ +#define KN02_CSR_INR_RES_4 4 /* unused */ +#define KN02_CSR_INR_RES_3 3 /* unused */ +#define KN02_CSR_INR_TC2 2 /* TURBOchannel slot #2 */ +#define KN02_CSR_INR_TC1 1 /* TURBOchannel slot #1 */ +#define KN02_CSR_INR_TC0 0 /* TURBOchannel slot #0 */ + + +#define KN02_IRQ_BASE 8 /* first IRQ assigned to CSR */ +#define KN02_IRQ_LINES 8 /* number of CSR interrupts */ + +#define KN02_IRQ_NR(n) ((n) + KN02_IRQ_BASE) +#define KN02_IRQ_MASK(n) (1 << (n)) +#define KN02_IRQ_ALL 0xff + + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> + +extern u32 cached_kn02_csr; +extern void init_kn02_irqs(int base); +#endif + +#endif /* __ASM_MIPS_DEC_KN02_H */ diff --git a/arch/mips/include/asm/dec/kn02ba.h b/arch/mips/include/asm/dec/kn02ba.h new file mode 100644 index 000000000000..c957a4f1b32d --- /dev/null +++ b/arch/mips/include/asm/dec/kn02ba.h @@ -0,0 +1,67 @@ +/* + * include/asm-mips/dec/kn02ba.h + * + * DECstation 5000/1xx (3min or KN02-BA) definitions. + * + * Copyright (C) 2002, 2003 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MIPS_DEC_KN02BA_H +#define __ASM_MIPS_DEC_KN02BA_H + +#include <asm/dec/kn02xa.h> /* For common definitions. */ + +/* + * CPU interrupt bits. + */ +#define KN02BA_CPU_INR_HALT 6 /* HALT button */ +#define KN02BA_CPU_INR_CASCADE 5 /* I/O ASIC cascade */ +#define KN02BA_CPU_INR_TC2 4 /* TURBOchannel slot #2 */ +#define KN02BA_CPU_INR_TC1 3 /* TURBOchannel slot #1 */ +#define KN02BA_CPU_INR_TC0 2 /* TURBOchannel slot #0 */ + +/* + * I/O ASIC interrupt bits. Star marks denote non-IRQ status bits. + */ +#define KN02BA_IO_INR_RES_15 15 /* unused */ +#define KN02BA_IO_INR_NVRAM 14 /* (*) NVRAM clear jumper */ +#define KN02BA_IO_INR_RES_13 13 /* unused */ +#define KN02BA_IO_INR_BUS 12 /* memory, I/O bus read/write errors */ +#define KN02BA_IO_INR_RES_11 11 /* unused */ +#define KN02BA_IO_INR_NRMOD 10 /* (*) NRMOD manufacturing jumper */ +#define KN02BA_IO_INR_ASC 9 /* ASC (NCR53C94) SCSI */ +#define KN02BA_IO_INR_LANCE 8 /* LANCE (Am7990) Ethernet */ +#define KN02BA_IO_INR_SCC1 7 /* SCC (Z85C30) serial #1 */ +#define KN02BA_IO_INR_SCC0 6 /* SCC (Z85C30) serial #0 */ +#define KN02BA_IO_INR_RTC 5 /* DS1287 RTC */ +#define KN02BA_IO_INR_PSU 4 /* power supply unit warning */ +#define KN02BA_IO_INR_RES_3 3 /* unused */ +#define KN02BA_IO_INR_ASC_DATA 2 /* SCSI data ready (for PIO) */ +#define KN02BA_IO_INR_PBNC 1 /* ~HALT button debouncer */ +#define KN02BA_IO_INR_PBNO 0 /* HALT button debouncer */ + + +/* + * Memory Error Register bits. + */ +#define KN02BA_MER_RES_27 (1<<27) /* unused */ + +/* + * Memory Size Register bits. + */ +#define KN02BA_MSR_RES_17 (0x3ff<<17) /* unused */ + +/* + * I/O ASIC System Support Register bits. + */ +#define KN02BA_IO_SSR_TXDIS1 (1<<14) /* SCC1 transmit disable */ +#define KN02BA_IO_SSR_TXDIS0 (1<<13) /* SCC0 transmit disable */ +#define KN02BA_IO_SSR_RES_12 (1<<12) /* unused */ + +#define KN02BA_IO_SSR_LEDS (0xff<<0) /* ~diagnostic LEDs */ + +#endif /* __ASM_MIPS_DEC_KN02BA_H */ diff --git a/arch/mips/include/asm/dec/kn02ca.h b/arch/mips/include/asm/dec/kn02ca.h new file mode 100644 index 000000000000..92c0fe256099 --- /dev/null +++ b/arch/mips/include/asm/dec/kn02ca.h @@ -0,0 +1,79 @@ +/* + * include/asm-mips/dec/kn02ca.h + * + * Personal DECstation 5000/xx (Maxine or KN02-CA) definitions. + * + * Copyright (C) 2002, 2003 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MIPS_DEC_KN02CA_H +#define __ASM_MIPS_DEC_KN02CA_H + +#include <asm/dec/kn02xa.h> /* For common definitions. */ + +/* + * CPU interrupt bits. + */ +#define KN02CA_CPU_INR_HALT 6 /* HALT from ACCESS.Bus */ +#define KN02CA_CPU_INR_CASCADE 5 /* I/O ASIC cascade */ +#define KN02CA_CPU_INR_BUS 4 /* memory, I/O bus read/write errors */ +#define KN02CA_CPU_INR_RTC 3 /* DS1287 RTC */ +#define KN02CA_CPU_INR_TIMER 2 /* ARC periodic timer */ + +/* + * I/O ASIC interrupt bits. Star marks denote non-IRQ status bits. + */ +#define KN02CA_IO_INR_FLOPPY 15 /* 82077 FDC */ +#define KN02CA_IO_INR_NVRAM 14 /* (*) NVRAM clear jumper */ +#define KN02CA_IO_INR_POWERON 13 /* (*) ACCESS.Bus/power-on reset */ +#define KN02CA_IO_INR_TC0 12 /* TURBOchannel slot #0 */ +#define KN02CA_IO_INR_TIMER 12 /* ARC periodic timer (?) */ +#define KN02CA_IO_INR_ISDN 11 /* Am79C30A ISDN */ +#define KN02CA_IO_INR_NRMOD 10 /* (*) NRMOD manufacturing jumper */ +#define KN02CA_IO_INR_ASC 9 /* ASC (NCR53C94) SCSI */ +#define KN02CA_IO_INR_LANCE 8 /* LANCE (Am7990) Ethernet */ +#define KN02CA_IO_INR_HDFLOPPY 7 /* (*) HD (1.44MB) floppy status */ +#define KN02CA_IO_INR_SCC0 6 /* SCC (Z85C30) serial #0 */ +#define KN02CA_IO_INR_TC1 5 /* TURBOchannel slot #1 */ +#define KN02CA_IO_INR_XDFLOPPY 4 /* (*) XD (2.88MB) floppy status */ +#define KN02CA_IO_INR_VIDEO 3 /* framebuffer */ +#define KN02CA_IO_INR_XVIDEO 2 /* ~framebuffer */ +#define KN02CA_IO_INR_AB_XMIT 1 /* ACCESS.bus transmit */ +#define KN02CA_IO_INR_AB_RECV 0 /* ACCESS.bus receive */ + + +/* + * Memory Error Register bits. + */ +#define KN02CA_MER_INTR (1<<27) /* ARC IRQ status & ack */ + +/* + * Memory Size Register bits. + */ +#define KN02CA_MSR_INTREN (1<<26) /* ARC periodic IRQ enable */ +#define KN02CA_MSR_MS10EN (1<<25) /* 10/1ms IRQ period select */ +#define KN02CA_MSR_PFORCE (0xf<<21) /* byte lane error force */ +#define KN02CA_MSR_MABEN (1<<20) /* A side VFB address enable */ +#define KN02CA_MSR_LASTBANK (0x7<<17) /* onboard RAM bank # */ + +/* + * I/O ASIC System Support Register bits. + */ +#define KN03CA_IO_SSR_RES_14 (1<<14) /* unused */ +#define KN03CA_IO_SSR_RES_13 (1<<13) /* unused */ +#define KN03CA_IO_SSR_ISDN_RST (1<<12) /* ~ISDN (Am79C30A) reset */ + +#define KN03CA_IO_SSR_FLOPPY_RST (1<<7) /* ~FDC (82077) reset */ +#define KN03CA_IO_SSR_VIDEO_RST (1<<6) /* ~framebuffer reset */ +#define KN03CA_IO_SSR_AB_RST (1<<5) /* ACCESS.bus reset */ +#define KN03CA_IO_SSR_RES_4 (1<<4) /* unused */ +#define KN03CA_IO_SSR_RES_3 (1<<4) /* unused */ +#define KN03CA_IO_SSR_RES_2 (1<<2) /* unused */ +#define KN03CA_IO_SSR_RES_1 (1<<1) /* unused */ +#define KN03CA_IO_SSR_LED (1<<0) /* power LED */ + +#endif /* __ASM_MIPS_DEC_KN02CA_H */ diff --git a/arch/mips/include/asm/dec/kn02xa.h b/arch/mips/include/asm/dec/kn02xa.h new file mode 100644 index 000000000000..b56b4577f6ef --- /dev/null +++ b/arch/mips/include/asm/dec/kn02xa.h @@ -0,0 +1,84 @@ +/* + * Hardware info common to DECstation 5000/1xx systems (otherwise + * known as 3min or kn02ba) and Personal DECstations 5000/xx ones + * (otherwise known as maxine or kn02ca). + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions + * are by courtesy of Chris Fraser. + * Copyright (C) 2000, 2002, 2003, 2005 Maciej W. Rozycki + * + * These are addresses which have to be known early in the boot process. + * For other addresses refer to tc.h, ioasic_addrs.h and friends. + */ +#ifndef __ASM_MIPS_DEC_KN02XA_H +#define __ASM_MIPS_DEC_KN02XA_H + +#include <asm/dec/ioasic_addrs.h> + +#define KN02XA_SLOT_BASE 0x1c000000 + +/* + * Memory control ASIC registers. + */ +#define KN02XA_MER 0x0c400000 /* memory error register */ +#define KN02XA_MSR 0x0c800000 /* memory size register */ + +/* + * CPU control ASIC registers. + */ +#define KN02XA_MEM_CONF 0x0e000000 /* write timeout config */ +#define KN02XA_EAR 0x0e000004 /* error address register */ +#define KN02XA_BOOT0 0x0e000008 /* boot 0 register */ +#define KN02XA_MEM_INTR 0x0e00000c /* write err IRQ stat & ack */ + +/* + * Memory Error Register bits, common definitions. + * The rest is defined in system-specific headers. + */ +#define KN02XA_MER_RES_28 (0xf<<28) /* unused */ +#define KN02XA_MER_RES_17 (0x3ff<<17) /* unused */ +#define KN02XA_MER_PAGERR (1<<16) /* 2k page boundary error */ +#define KN02XA_MER_TRANSERR (1<<15) /* transfer length error */ +#define KN02XA_MER_PARDIS (1<<14) /* parity error disable */ +#define KN02XA_MER_SIZE (1<<13) /* r/o mirror of MSR_SIZE */ +#define KN02XA_MER_RES_12 (1<<12) /* unused */ +#define KN02XA_MER_BYTERR (0xf<<8) /* byte lane error bitmask: */ +#define KN02XA_MER_BYTERR_3 (0x8<<8) /* byte lane #3 */ +#define KN02XA_MER_BYTERR_2 (0x4<<8) /* byte lane #2 */ +#define KN02XA_MER_BYTERR_1 (0x2<<8) /* byte lane #1 */ +#define KN02XA_MER_BYTERR_0 (0x1<<8) /* byte lane #0 */ +#define KN02XA_MER_RES_0 (0xff<<0) /* unused */ + +/* + * Memory Size Register bits, common definitions. + * The rest is defined in system-specific headers. + */ +#define KN02XA_MSR_RES_27 (0x1f<<27) /* unused */ +#define KN02XA_MSR_RES_14 (0x7<<14) /* unused */ +#define KN02XA_MSR_SIZE (1<<13) /* 16M/4M stride */ +#define KN02XA_MSR_RES_0 (0x1fff<<0) /* unused */ + +/* + * Error Address Register bits. + */ +#define KN02XA_EAR_RES_29 (0x7<<29) /* unused */ +#define KN02XA_EAR_ADDRESS (0x7ffffff<<2) /* address involved */ +#define KN02XA_EAR_RES_0 (0x3<<0) /* unused */ + + +#ifndef __ASSEMBLY__ + +#include <linux/interrupt.h> + +struct pt_regs; + +extern void dec_kn02xa_be_init(void); +extern int dec_kn02xa_be_handler(struct pt_regs *regs, int is_fixup); +extern irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id); +#endif + +#endif /* __ASM_MIPS_DEC_KN02XA_H */ diff --git a/arch/mips/include/asm/dec/kn03.h b/arch/mips/include/asm/dec/kn03.h new file mode 100644 index 000000000000..edede923ffb8 --- /dev/null +++ b/arch/mips/include/asm/dec/kn03.h @@ -0,0 +1,74 @@ +/* + * Hardware info about DECstation 5000/2x0 systems (otherwise known as + * 3max+) and DECsystem 5900 systems (otherwise known as bigmax) which + * differ mechanically but are otherwise identical (both are known as + * KN03). + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions + * are by courtesy of Chris Fraser. + * Copyright (C) 2000, 2002, 2003, 2005 Maciej W. Rozycki + */ +#ifndef __ASM_MIPS_DEC_KN03_H +#define __ASM_MIPS_DEC_KN03_H + +#include <asm/dec/ecc.h> +#include <asm/dec/ioasic_addrs.h> + +#define KN03_SLOT_BASE 0x1f800000 + +/* + * CPU interrupt bits. + */ +#define KN03_CPU_INR_HALT 6 /* HALT button */ +#define KN03_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */ +#define KN03_CPU_INR_RES_4 4 /* unused */ +#define KN03_CPU_INR_RTC 3 /* DS1287 RTC */ +#define KN03_CPU_INR_CASCADE 2 /* I/O ASIC cascade */ + +/* + * I/O ASIC interrupt bits. Star marks denote non-IRQ status bits. + */ +#define KN03_IO_INR_3MAXP 15 /* (*) 3max+/bigmax ID */ +#define KN03_IO_INR_NVRAM 14 /* (*) NVRAM clear jumper */ +#define KN03_IO_INR_TC2 13 /* TURBOchannel slot #2 */ +#define KN03_IO_INR_TC1 12 /* TURBOchannel slot #1 */ +#define KN03_IO_INR_TC0 11 /* TURBOchannel slot #0 */ +#define KN03_IO_INR_NRMOD 10 /* (*) NRMOD manufacturing jumper */ +#define KN03_IO_INR_ASC 9 /* ASC (NCR53C94) SCSI */ +#define KN03_IO_INR_LANCE 8 /* LANCE (Am7990) Ethernet */ +#define KN03_IO_INR_SCC1 7 /* SCC (Z85C30) serial #1 */ +#define KN03_IO_INR_SCC0 6 /* SCC (Z85C30) serial #0 */ +#define KN03_IO_INR_RTC 5 /* DS1287 RTC */ +#define KN03_IO_INR_PSU 4 /* power supply unit warning */ +#define KN03_IO_INR_RES_3 3 /* unused */ +#define KN03_IO_INR_ASC_DATA 2 /* SCSI data ready (for PIO) */ +#define KN03_IO_INR_PBNC 1 /* ~HALT button debouncer */ +#define KN03_IO_INR_PBNO 0 /* HALT button debouncer */ + + +/* + * Memory Control Register bits. + */ +#define KN03_MCR_RES_16 (0xffff<<16) /* unused */ +#define KN03_MCR_DIAGCHK (1<<15) /* diagn/norml ECC reads */ +#define KN03_MCR_DIAGGEN (1<<14) /* diagn/norml ECC writes */ +#define KN03_MCR_CORRECT (1<<13) /* ECC correct/check */ +#define KN03_MCR_RES_11 (0x3<<12) /* unused */ +#define KN03_MCR_BNK32M (1<<10) /* 32M/8M stride */ +#define KN03_MCR_RES_7 (0x7<<7) /* unused */ +#define KN03_MCR_CHECK (0x7f<<0) /* diagnostic check bits */ + +/* + * I/O ASIC System Support Register bits. + */ +#define KN03_IO_SSR_TXDIS1 (1<<14) /* SCC1 transmit disable */ +#define KN03_IO_SSR_TXDIS0 (1<<13) /* SCC0 transmit disable */ +#define KN03_IO_SSR_RES_12 (1<<12) /* unused */ + +#define KN03_IO_SSR_LEDS (0xff<<0) /* ~diagnostic LEDs */ + +#endif /* __ASM_MIPS_DEC_KN03_H */ diff --git a/arch/mips/include/asm/dec/kn05.h b/arch/mips/include/asm/dec/kn05.h new file mode 100644 index 000000000000..56d22dc8803a --- /dev/null +++ b/arch/mips/include/asm/dec/kn05.h @@ -0,0 +1,76 @@ +/* + * include/asm-mips/dec/kn05.h + * + * DECstation/DECsystem 5000/260 (4max+ or KN05), 5000/150 (4min + * or KN04-BA), Personal DECstation/DECsystem 5000/50 (4maxine or + * KN04-CA) and DECsystem 5900/260 (KN05) R4k CPU card MB ASIC + * definitions. + * + * Copyright (C) 2002, 2003, 2005, 2008 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * WARNING! All this information is pure guesswork based on the + * ROM. It is provided here in hope it will give someone some + * food for thought. No documentation for the KN05 nor the KN04 + * module has been located so far. + */ +#ifndef __ASM_MIPS_DEC_KN05_H +#define __ASM_MIPS_DEC_KN05_H + +#include <asm/dec/ioasic_addrs.h> + +/* + * The oncard MB (Memory Buffer) ASIC provides an additional address + * decoder. Certain address ranges within the "high" 16 slots are + * passed to the I/O ASIC's decoder like with the KN03 or KN02-BA/CA. + * Others are handled locally. "Low" slots are always passed. + */ +#define KN4K_SLOT_BASE 0x1fc00000 + +#define KN4K_MB_ROM (0*IOASIC_SLOT_SIZE) /* KN05/KN04 card ROM */ +#define KN4K_IOCTL (1*IOASIC_SLOT_SIZE) /* I/O ASIC */ +#define KN4K_ESAR (2*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */ +#define KN4K_LANCE (3*IOASIC_SLOT_SIZE) /* LANCE Ethernet */ +#define KN4K_MB_INT (4*IOASIC_SLOT_SIZE) /* MB interrupt register */ +#define KN4K_MB_EA (5*IOASIC_SLOT_SIZE) /* MB error address? */ +#define KN4K_MB_EC (6*IOASIC_SLOT_SIZE) /* MB error ??? */ +#define KN4K_MB_CSR (7*IOASIC_SLOT_SIZE) /* MB control & status */ +#define KN4K_RES_08 (8*IOASIC_SLOT_SIZE) /* unused? */ +#define KN4K_RES_09 (9*IOASIC_SLOT_SIZE) /* unused? */ +#define KN4K_RES_10 (10*IOASIC_SLOT_SIZE) /* unused? */ +#define KN4K_RES_11 (11*IOASIC_SLOT_SIZE) /* unused? */ +#define KN4K_SCSI (12*IOASIC_SLOT_SIZE) /* ASC SCSI */ +#define KN4K_RES_13 (13*IOASIC_SLOT_SIZE) /* unused? */ +#define KN4K_RES_14 (14*IOASIC_SLOT_SIZE) /* unused? */ +#define KN4K_RES_15 (15*IOASIC_SLOT_SIZE) /* unused? */ + +/* + * Bits for the MB interrupt register. + * The register appears read-only. + */ +#define KN4K_MB_INT_TC (1<<0) /* TURBOchannel? */ +#define KN4K_MB_INT_RTC (1<<1) /* RTC? */ +#define KN4K_MB_INT_MT (1<<3) /* I/O ASIC cascade */ + +/* + * Bits for the MB control & status register. + * Set to 0x00bf8001 for KN05 and to 0x003f8000 for KN04 by the firmware. + */ +#define KN4K_MB_CSR_PF (1<<0) /* PreFetching enable? */ +#define KN4K_MB_CSR_F (1<<1) /* ??? */ +#define KN4K_MB_CSR_ECC (0xff<<2) /* ??? */ +#define KN4K_MB_CSR_OD (1<<10) /* ??? */ +#define KN4K_MB_CSR_CP (1<<11) /* ??? */ +#define KN4K_MB_CSR_UNC (1<<12) /* ??? */ +#define KN4K_MB_CSR_IM (1<<13) /* ??? */ +#define KN4K_MB_CSR_NC (1<<14) /* ??? */ +#define KN4K_MB_CSR_EE (1<<15) /* (bus) Exception Enable? */ +#define KN4K_MB_CSR_MSK (0x1f<<16) /* CPU Int[4:0] mask */ +#define KN4K_MB_CSR_FW (1<<21) /* ??? */ +#define KN4K_MB_CSR_W (1<<31) /* ??? */ + +#endif /* __ASM_MIPS_DEC_KN05_H */ diff --git a/arch/mips/include/asm/dec/kn230.h b/arch/mips/include/asm/dec/kn230.h new file mode 100644 index 000000000000..ff1bf17de8d8 --- /dev/null +++ b/arch/mips/include/asm/dec/kn230.h @@ -0,0 +1,26 @@ +/* + * include/asm-mips/dec/kn230.h + * + * DECsystem 5100 (MIPSmate or KN230) definitions. + * + * Copyright (C) 2002, 2003 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MIPS_DEC_KN230_H +#define __ASM_MIPS_DEC_KN230_H + +/* + * CPU interrupt bits. + */ +#define KN230_CPU_INR_HALT 6 /* HALT button */ +#define KN230_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */ +#define KN230_CPU_INR_RTC 4 /* DS1287 RTC */ +#define KN230_CPU_INR_SII 3 /* SII (DC7061) SCSI */ +#define KN230_CPU_INR_LANCE 3 /* LANCE (Am7990) Ethernet */ +#define KN230_CPU_INR_DZ11 2 /* DZ11 (DC7085) serial */ + +#endif /* __ASM_MIPS_DEC_KN230_H */ diff --git a/arch/mips/include/asm/dec/machtype.h b/arch/mips/include/asm/dec/machtype.h new file mode 100644 index 000000000000..a6ecdebc430a --- /dev/null +++ b/arch/mips/include/asm/dec/machtype.h @@ -0,0 +1,27 @@ +/* + * Various machine type macros + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1998, 2000 Harald Koerfgen + */ + +#ifndef __ASM_DEC_MACHTYPE_H +#define __ASM_DEC_MACHTYPE_H + +#include <asm/bootinfo.h> + +#define TURBOCHANNEL (mips_machtype == MACH_DS5000_200 || \ + mips_machtype == MACH_DS5000_1XX || \ + mips_machtype == MACH_DS5000_XX || \ + mips_machtype == MACH_DS5000_2X0 || \ + mips_machtype == MACH_DS5900) + +#define IOASIC (mips_machtype == MACH_DS5000_1XX || \ + mips_machtype == MACH_DS5000_XX || \ + mips_machtype == MACH_DS5000_2X0 || \ + mips_machtype == MACH_DS5900) + +#endif diff --git a/arch/mips/include/asm/dec/prom.h b/arch/mips/include/asm/dec/prom.h new file mode 100644 index 000000000000..b9c8203688d5 --- /dev/null +++ b/arch/mips/include/asm/dec/prom.h @@ -0,0 +1,174 @@ +/* + * include/asm-mips/dec/prom.h + * + * DECstation PROM interface. + * + * Copyright (C) 2002 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Based on arch/mips/dec/prom/prom.h by the Anonymous. + */ +#ifndef _ASM_DEC_PROM_H +#define _ASM_DEC_PROM_H + +#include <linux/types.h> + +#include <asm/addrspace.h> + +/* + * PMAX/3MAX PROM entry points for DS2100/3100's and DS5000/2xx's. + * Many of these will work for MIPSen as well! + */ +#define VEC_RESET (u64 *)CKSEG1ADDR(0x1fc00000) + /* Prom base address */ + +#define PMAX_PROM_ENTRY(x) (VEC_RESET + (x)) /* Prom jump table */ + +#define PMAX_PROM_HALT PMAX_PROM_ENTRY(2) /* valid on MIPSen */ +#define PMAX_PROM_AUTOBOOT PMAX_PROM_ENTRY(5) /* valid on MIPSen */ +#define PMAX_PROM_OPEN PMAX_PROM_ENTRY(6) +#define PMAX_PROM_READ PMAX_PROM_ENTRY(7) +#define PMAX_PROM_CLOSE PMAX_PROM_ENTRY(10) +#define PMAX_PROM_LSEEK PMAX_PROM_ENTRY(11) +#define PMAX_PROM_GETCHAR PMAX_PROM_ENTRY(12) +#define PMAX_PROM_PUTCHAR PMAX_PROM_ENTRY(13) /* 12 on MIPSen */ +#define PMAX_PROM_GETS PMAX_PROM_ENTRY(15) +#define PMAX_PROM_PRINTF PMAX_PROM_ENTRY(17) +#define PMAX_PROM_GETENV PMAX_PROM_ENTRY(33) /* valid on MIPSen */ + + +/* + * Magic number indicating REX PROM available on DECstation. Found in + * register a2 on transfer of control to program from PROM. + */ +#define REX_PROM_MAGIC 0x30464354 + +#ifdef CONFIG_64BIT + +#define prom_is_rex(magic) 1 /* KN04 and KN05 are REX PROMs. */ + +#else /* !CONFIG_64BIT */ + +#define prom_is_rex(magic) ((magic) == REX_PROM_MAGIC) + +#endif /* !CONFIG_64BIT */ + + +/* + * 3MIN/MAXINE PROM entry points for DS5000/1xx's, DS5000/xx's and + * DS5000/2x0. + */ +#define REX_PROM_GETBITMAP 0x84/4 /* get mem bitmap */ +#define REX_PROM_GETCHAR 0x24/4 /* getch() */ +#define REX_PROM_GETENV 0x64/4 /* get env. variable */ +#define REX_PROM_GETSYSID 0x80/4 /* get system id */ +#define REX_PROM_GETTCINFO 0xa4/4 +#define REX_PROM_PRINTF 0x30/4 /* printf() */ +#define REX_PROM_SLOTADDR 0x6c/4 /* slotaddr */ +#define REX_PROM_BOOTINIT 0x54/4 /* open() */ +#define REX_PROM_BOOTREAD 0x58/4 /* read() */ +#define REX_PROM_CLEARCACHE 0x7c/4 + + +/* + * Used by rex_getbitmap(). + */ +typedef struct { + int pagesize; + unsigned char bitmap[0]; +} memmap; + + +/* + * Function pointers as read from a PROM's callback vector. + */ +extern int (*__rex_bootinit)(void); +extern int (*__rex_bootread)(void); +extern int (*__rex_getbitmap)(memmap *); +extern unsigned long *(*__rex_slot_address)(int); +extern void *(*__rex_gettcinfo)(void); +extern int (*__rex_getsysid)(void); +extern void (*__rex_clear_cache)(void); + +extern int (*__prom_getchar)(void); +extern char *(*__prom_getenv)(char *); +extern int (*__prom_printf)(char *, ...); + +extern int (*__pmax_open)(char*, int); +extern int (*__pmax_lseek)(int, long, int); +extern int (*__pmax_read)(int, void *, int); +extern int (*__pmax_close)(int); + + +#ifdef CONFIG_64BIT + +/* + * On MIPS64 we have to call PROM functions via a helper + * dispatcher to accomodate ABI incompatibilities. + */ +#define __DEC_PROM_O32(fun, arg) fun arg __asm__(#fun); \ + __asm__(#fun " = call_o32") + +int __DEC_PROM_O32(_rex_bootinit, (int (*)(void))); +int __DEC_PROM_O32(_rex_bootread, (int (*)(void))); +int __DEC_PROM_O32(_rex_getbitmap, (int (*)(memmap *), memmap *)); +unsigned long *__DEC_PROM_O32(_rex_slot_address, + (unsigned long *(*)(int), int)); +void *__DEC_PROM_O32(_rex_gettcinfo, (void *(*)(void))); +int __DEC_PROM_O32(_rex_getsysid, (int (*)(void))); +void __DEC_PROM_O32(_rex_clear_cache, (void (*)(void))); + +int __DEC_PROM_O32(_prom_getchar, (int (*)(void))); +char *__DEC_PROM_O32(_prom_getenv, (char *(*)(char *), char *)); +int __DEC_PROM_O32(_prom_printf, (int (*)(char *, ...), char *, ...)); + + +#define rex_bootinit() _rex_bootinit(__rex_bootinit) +#define rex_bootread() _rex_bootread(__rex_bootread) +#define rex_getbitmap(x) _rex_getbitmap(__rex_getbitmap, x) +#define rex_slot_address(x) _rex_slot_address(__rex_slot_address, x) +#define rex_gettcinfo() _rex_gettcinfo(__rex_gettcinfo) +#define rex_getsysid() _rex_getsysid(__rex_getsysid) +#define rex_clear_cache() _rex_clear_cache(__rex_clear_cache) + +#define prom_getchar() _prom_getchar(__prom_getchar) +#define prom_getenv(x) _prom_getenv(__prom_getenv, x) +#define prom_printf(x...) _prom_printf(__prom_printf, x) + +#else /* !CONFIG_64BIT */ + +/* + * On plain MIPS we just call PROM functions directly. + */ +#define rex_bootinit __rex_bootinit +#define rex_bootread __rex_bootread +#define rex_getbitmap __rex_getbitmap +#define rex_slot_address __rex_slot_address +#define rex_gettcinfo __rex_gettcinfo +#define rex_getsysid __rex_getsysid +#define rex_clear_cache __rex_clear_cache + +#define prom_getchar __prom_getchar +#define prom_getenv __prom_getenv +#define prom_printf __prom_printf + +#define pmax_open __pmax_open +#define pmax_lseek __pmax_lseek +#define pmax_read __pmax_read +#define pmax_close __pmax_close + +#endif /* !CONFIG_64BIT */ + + +extern void prom_meminit(u32); +extern void prom_identify_arch(u32); +extern void prom_init_cmdline(s32, s32 *, u32); + +extern void register_prom_console(void); +extern void unregister_prom_console(void); + +#endif /* _ASM_DEC_PROM_H */ diff --git a/arch/mips/include/asm/dec/system.h b/arch/mips/include/asm/dec/system.h new file mode 100644 index 000000000000..b2afaccd6831 --- /dev/null +++ b/arch/mips/include/asm/dec/system.h @@ -0,0 +1,19 @@ +/* + * include/asm-mips/dec/system.h + * + * Generic DECstation/DECsystem bits. + * + * Copyright (C) 2005, 2006 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_DEC_SYSTEM_H +#define __ASM_DEC_SYSTEM_H + +extern unsigned long dec_kn_slot_base, dec_kn_slot_size; +extern int dec_tc_bus; + +#endif /* __ASM_DEC_SYSTEM_H */ diff --git a/arch/mips/include/asm/delay.h b/arch/mips/include/asm/delay.h new file mode 100644 index 000000000000..b0bccd2c4ed5 --- /dev/null +++ b/arch/mips/include/asm/delay.h @@ -0,0 +1,112 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 by Waldorf Electronics + * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2007 Maciej W. Rozycki + */ +#ifndef _ASM_DELAY_H +#define _ASM_DELAY_H + +#include <linux/param.h> +#include <linux/smp.h> + +#include <asm/compiler.h> +#include <asm/war.h> + +static inline void __delay(unsigned long loops) +{ + if (sizeof(long) == 4) + __asm__ __volatile__ ( + " .set noreorder \n" + " .align 3 \n" + "1: bnez %0, 1b \n" + " subu %0, 1 \n" + " .set reorder \n" + : "=r" (loops) + : "0" (loops)); + else if (sizeof(long) == 8 && !DADDI_WAR) + __asm__ __volatile__ ( + " .set noreorder \n" + " .align 3 \n" + "1: bnez %0, 1b \n" + " dsubu %0, 1 \n" + " .set reorder \n" + : "=r" (loops) + : "0" (loops)); + else if (sizeof(long) == 8 && DADDI_WAR) + __asm__ __volatile__ ( + " .set noreorder \n" + " .align 3 \n" + "1: bnez %0, 1b \n" + " dsubu %0, %2 \n" + " .set reorder \n" + : "=r" (loops) + : "0" (loops), "r" (1)); +} + + +/* + * Division by multiplication: you don't have to worry about + * loss of precision. + * + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ + +static inline void __udelay(unsigned long usecs, unsigned long lpj) +{ + unsigned long hi, lo; + + /* + * The rates of 128 is rounded wrongly by the catchall case + * for 64-bit. Excessive precission? Probably ... + */ +#if defined(CONFIG_64BIT) && (HZ == 128) + usecs *= 0x0008637bd05af6c7UL; /* 2**64 / (1000000 / HZ) */ +#elif defined(CONFIG_64BIT) + usecs *= (0x8000000000000000UL / (500000 / HZ)); +#else /* 32-bit junk follows here */ + usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) + + 0x80000000ULL) >> 32); +#endif + + if (sizeof(long) == 4) + __asm__("multu\t%2, %3" + : "=h" (usecs), "=l" (lo) + : "r" (usecs), "r" (lpj) + : GCC_REG_ACCUM); + else if (sizeof(long) == 8 && !R4000_WAR) + __asm__("dmultu\t%2, %3" + : "=h" (usecs), "=l" (lo) + : "r" (usecs), "r" (lpj) + : GCC_REG_ACCUM); + else if (sizeof(long) == 8 && R4000_WAR) + __asm__("dmultu\t%3, %4\n\tmfhi\t%0" + : "=r" (usecs), "=h" (hi), "=l" (lo) + : "r" (usecs), "r" (lpj) + : GCC_REG_ACCUM); + + __delay(usecs); +} + +#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val + +#define udelay(usecs) __udelay((usecs), __udelay_val) + +/* make sure "usecs *= ..." in udelay do not overflow. */ +#if HZ >= 1000 +#define MAX_UDELAY_MS 1 +#elif HZ <= 200 +#define MAX_UDELAY_MS 5 +#else +#define MAX_UDELAY_MS (1000 / HZ) +#endif + +#endif /* _ASM_DELAY_H */ diff --git a/arch/mips/include/asm/device.h b/arch/mips/include/asm/device.h new file mode 100644 index 000000000000..d8f9872b0e2d --- /dev/null +++ b/arch/mips/include/asm/device.h @@ -0,0 +1,7 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include <asm-generic/device.h> + diff --git a/arch/mips/include/asm/div64.h b/arch/mips/include/asm/div64.h new file mode 100644 index 000000000000..d1d699105c11 --- /dev/null +++ b/arch/mips/include/asm/div64.h @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2000, 2004 Maciej W. Rozycki + * Copyright (C) 2003, 07 Ralf Baechle (ralf@linux-mips.org) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef _ASM_DIV64_H +#define _ASM_DIV64_H + +#include <linux/types.h> + +#if (_MIPS_SZLONG == 32) + +#include <asm/compiler.h> + +/* + * No traps on overflows for any of these... + */ + +#define do_div64_32(res, high, low, base) ({ \ + unsigned long __quot32, __mod32; \ + unsigned long __cf, __tmp, __tmp2, __i; \ + \ + __asm__(".set push\n\t" \ + ".set noat\n\t" \ + ".set noreorder\n\t" \ + "move %2, $0\n\t" \ + "move %3, $0\n\t" \ + "b 1f\n\t" \ + " li %4, 0x21\n" \ + "0:\n\t" \ + "sll $1, %0, 0x1\n\t" \ + "srl %3, %0, 0x1f\n\t" \ + "or %0, $1, %5\n\t" \ + "sll %1, %1, 0x1\n\t" \ + "sll %2, %2, 0x1\n" \ + "1:\n\t" \ + "bnez %3, 2f\n\t" \ + " sltu %5, %0, %z6\n\t" \ + "bnez %5, 3f\n" \ + "2:\n\t" \ + " addiu %4, %4, -1\n\t" \ + "subu %0, %0, %z6\n\t" \ + "addiu %2, %2, 1\n" \ + "3:\n\t" \ + "bnez %4, 0b\n\t" \ + " srl %5, %1, 0x1f\n\t" \ + ".set pop" \ + : "=&r" (__mod32), "=&r" (__tmp), \ + "=&r" (__quot32), "=&r" (__cf), \ + "=&r" (__i), "=&r" (__tmp2) \ + : "Jr" (base), "0" (high), "1" (low)); \ + \ + (res) = __quot32; \ + __mod32; }) + +#define do_div(n, base) ({ \ + unsigned long long __quot; \ + unsigned long __mod; \ + unsigned long long __div; \ + unsigned long __upper, __low, __high, __base; \ + \ + __div = (n); \ + __base = (base); \ + \ + __high = __div >> 32; \ + __low = __div; \ + __upper = __high; \ + \ + if (__high) \ + __asm__("divu $0, %z2, %z3" \ + : "=h" (__upper), "=l" (__high) \ + : "Jr" (__high), "Jr" (__base) \ + : GCC_REG_ACCUM); \ + \ + __mod = do_div64_32(__low, __upper, __low, __base); \ + \ + __quot = __high; \ + __quot = __quot << 32 | __low; \ + (n) = __quot; \ + __mod; }) + +#endif /* (_MIPS_SZLONG == 32) */ + +#if (_MIPS_SZLONG == 64) + +/* + * Hey, we're already 64-bit, no + * need to play games.. + */ +#define do_div(n, base) ({ \ + unsigned long __quot; \ + unsigned int __mod; \ + unsigned long __div; \ + unsigned int __base; \ + \ + __div = (n); \ + __base = (base); \ + \ + __mod = __div % __base; \ + __quot = __div / __base; \ + \ + (n) = __quot; \ + __mod; }) + +#endif /* (_MIPS_SZLONG == 64) */ + +#endif /* _ASM_DIV64_H */ diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h new file mode 100644 index 000000000000..c64afb40cd06 --- /dev/null +++ b/arch/mips/include/asm/dma-mapping.h @@ -0,0 +1,81 @@ +#ifndef _ASM_DMA_MAPPING_H +#define _ASM_DMA_MAPPING_H + +#include <asm/scatterlist.h> +#include <asm/cache.h> + +void *dma_alloc_noncoherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); + +void dma_free_noncoherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); + +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + +extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction); +extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction); +extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction); +extern dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, enum dma_data_direction direction); +extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, enum dma_data_direction direction); +extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, enum dma_data_direction direction); +extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction); +extern void dma_sync_single_for_device(struct device *dev, + dma_addr_t dma_handle, size_t size, enum dma_data_direction direction); +extern void dma_sync_single_range_for_cpu(struct device *dev, + dma_addr_t dma_handle, unsigned long offset, size_t size, + enum dma_data_direction direction); +extern void dma_sync_single_range_for_device(struct device *dev, + dma_addr_t dma_handle, unsigned long offset, size_t size, + enum dma_data_direction direction); +extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction direction); +extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction direction); +extern int dma_mapping_error(struct device *dev, dma_addr_t dma_addr); +extern int dma_supported(struct device *dev, u64 mask); + +static inline int +dma_set_mask(struct device *dev, u64 mask) +{ + if(!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + + *dev->dma_mask = mask; + + return 0; +} + +static inline int +dma_get_cache_alignment(void) +{ + /* XXX Largest on any MIPS */ + return 128; +} + +extern int dma_is_consistent(struct device *dev, dma_addr_t dma_addr); + +extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction); + +#if 0 +#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY + +extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, + dma_addr_t device_addr, size_t size, int flags); +extern void dma_release_declared_memory(struct device *dev); +extern void * dma_mark_declared_memory_occupied(struct device *dev, + dma_addr_t device_addr, size_t size); +#endif + +#endif /* _ASM_DMA_MAPPING_H */ diff --git a/arch/mips/include/asm/dma.h b/arch/mips/include/asm/dma.h new file mode 100644 index 000000000000..1353c81065d1 --- /dev/null +++ b/arch/mips/include/asm/dma.h @@ -0,0 +1,315 @@ +/* + * linux/include/asm/dma.h: Defines for using and allocating dma channels. + * Written by Hennus Bergman, 1992. + * High DMA channel support & info by Hannu Savolainen + * and John Boyd, Nov. 1992. + * + * NOTE: all this is true *only* for ISA/EISA expansions on Mips boards + * and can only be used for expansion cards. Onboard DMA controllers, such + * as the R4030 on Jazz boards behave totally different! + */ + +#ifndef _ASM_DMA_H +#define _ASM_DMA_H + +#include <asm/io.h> /* need byte IO */ +#include <linux/spinlock.h> /* And spinlocks */ +#include <linux/delay.h> +#include <asm/system.h> + + +#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER +#define dma_outb outb_p +#else +#define dma_outb outb +#endif + +#define dma_inb inb + +/* + * NOTES about DMA transfers: + * + * controller 1: channels 0-3, byte operations, ports 00-1F + * controller 2: channels 4-7, word operations, ports C0-DF + * + * - ALL registers are 8 bits only, regardless of transfer size + * - channel 4 is not used - cascades 1 into 2. + * - channels 0-3 are byte - addresses/counts are for physical bytes + * - channels 5-7 are word - addresses/counts are for physical words + * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries + * - transfer count loaded to registers is 1 less than actual count + * - controller 2 offsets are all even (2x offsets for controller 1) + * - page registers for 5-7 don't use data bit 0, represent 128K pages + * - page registers for 0-3 use bit 0, represent 64K pages + * + * DMA transfers are limited to the lower 16MB of _physical_ memory. + * Note that addresses loaded into registers must be _physical_ addresses, + * not logical addresses (which may differ if paging is active). + * + * Address mapping for channels 0-3: + * + * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * P7 ... P0 A7 ... A0 A7 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Address mapping for channels 5-7: + * + * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) + * | ... | \ \ ... \ \ \ ... \ \ + * | ... | \ \ ... \ \ \ ... \ (not used) + * | ... | \ \ ... \ \ \ ... \ + * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses + * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at + * the hardware level, so odd-byte transfers aren't possible). + * + * Transfer count (_not # bytes_) is limited to 64K, represented as actual + * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, + * and up to 128K bytes may be transferred on channels 5-7 in one operation. + * + */ + +#ifndef CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN +#define MAX_DMA_CHANNELS 8 +#endif + +/* + * The maximum address in KSEG0 that we can perform a DMA transfer to on this + * platform. This describes only the PC style part of the DMA logic like on + * Deskstations or Acer PICA but not the much more versatile DMA logic used + * for the local devices on Acer PICA or Magnums. + */ +#if defined(CONFIG_SGI_IP22) || defined(CONFIG_SGI_IP28) +/* don't care; ISA bus master won't work, ISA slave DMA supports 32bit addr */ +#define MAX_DMA_ADDRESS PAGE_OFFSET +#else +#define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x01000000) +#endif +#define MAX_DMA_PFN PFN_DOWN(virt_to_phys((void *)MAX_DMA_ADDRESS)) +#define MAX_DMA32_PFN (1UL << (32 - PAGE_SHIFT)) + +/* 8237 DMA controllers */ +#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ +#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */ + +/* DMA controller registers */ +#define DMA1_CMD_REG 0x08 /* command register (w) */ +#define DMA1_STAT_REG 0x08 /* status register (r) */ +#define DMA1_REQ_REG 0x09 /* request register (w) */ +#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ +#define DMA1_MODE_REG 0x0B /* mode register (w) */ +#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ +#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ +#define DMA1_RESET_REG 0x0D /* Master Clear (w) */ +#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ +#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ + +#define DMA2_CMD_REG 0xD0 /* command register (w) */ +#define DMA2_STAT_REG 0xD0 /* status register (r) */ +#define DMA2_REQ_REG 0xD2 /* request register (w) */ +#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ +#define DMA2_MODE_REG 0xD6 /* mode register (w) */ +#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ +#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ +#define DMA2_RESET_REG 0xDA /* Master Clear (w) */ +#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ +#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ + +#define DMA_ADDR_0 0x00 /* DMA address registers */ +#define DMA_ADDR_1 0x02 +#define DMA_ADDR_2 0x04 +#define DMA_ADDR_3 0x06 +#define DMA_ADDR_4 0xC0 +#define DMA_ADDR_5 0xC4 +#define DMA_ADDR_6 0xC8 +#define DMA_ADDR_7 0xCC + +#define DMA_CNT_0 0x01 /* DMA count registers */ +#define DMA_CNT_1 0x03 +#define DMA_CNT_2 0x05 +#define DMA_CNT_3 0x07 +#define DMA_CNT_4 0xC2 +#define DMA_CNT_5 0xC6 +#define DMA_CNT_6 0xCA +#define DMA_CNT_7 0xCE + +#define DMA_PAGE_0 0x87 /* DMA page registers */ +#define DMA_PAGE_1 0x83 +#define DMA_PAGE_2 0x81 +#define DMA_PAGE_3 0x82 +#define DMA_PAGE_5 0x8B +#define DMA_PAGE_6 0x89 +#define DMA_PAGE_7 0x8A + +#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ +#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ +#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ + +#define DMA_AUTOINIT 0x10 + +extern spinlock_t dma_spin_lock; + +static __inline__ unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static __inline__ void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + if (dmanr<=3) + dma_outb(dmanr, DMA1_MASK_REG); + else + dma_outb(dmanr & 3, DMA2_MASK_REG); +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + if (dmanr<=3) + dma_outb(dmanr | 4, DMA1_MASK_REG); + else + dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); +} + +/* Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while holding the DMA lock ! --- + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ + if (dmanr<=3) + dma_outb(0, DMA1_CLEAR_FF_REG); + else + dma_outb(0, DMA2_CLEAR_FF_REG); +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + if (dmanr<=3) + dma_outb(mode | dmanr, DMA1_MODE_REG); + else + dma_outb(mode | (dmanr&3), DMA2_MODE_REG); +} + +/* Set only the page register bits of the transfer address. + * This is used for successive transfers when we know the contents of + * the lower 16 bits of the DMA current address register, but a 64k boundary + * may have been crossed. + */ +static __inline__ void set_dma_page(unsigned int dmanr, char pagenr) +{ + switch(dmanr) { + case 0: + dma_outb(pagenr, DMA_PAGE_0); + break; + case 1: + dma_outb(pagenr, DMA_PAGE_1); + break; + case 2: + dma_outb(pagenr, DMA_PAGE_2); + break; + case 3: + dma_outb(pagenr, DMA_PAGE_3); + break; + case 5: + dma_outb(pagenr & 0xfe, DMA_PAGE_5); + break; + case 6: + dma_outb(pagenr & 0xfe, DMA_PAGE_6); + break; + case 7: + dma_outb(pagenr & 0xfe, DMA_PAGE_7); + break; + } +} + + +/* Set transfer address & page bits for specific DMA channel. + * Assumes dma flipflop is clear. + */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) +{ + set_dma_page(dmanr, a>>16); + if (dmanr <= 3) { + dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); + dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); + } else { + dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); + dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); + } +} + + +/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for + * a specific DMA channel. + * You must ensure the parameters are valid. + * NOTE: from a manual: "the number of transfers is one more + * than the initial word count"! This is taken into account. + * Assumes dma flip-flop is clear. + * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + count--; + if (dmanr <= 3) { + dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); + dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); + } else { + dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); + dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); + } +} + + +/* Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * If called before the channel has been used, it may return 1. + * Otherwise, it returns the number of _bytes_ left to transfer. + * + * Assumes DMA flip-flop is clear. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE + : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; + + /* using short to get 16-bit wrap around */ + unsigned short count; + + count = 1 + dma_inb(io_port); + count += dma_inb(io_port) << 8; + + return (dmanr<=3)? count : (count<<1); +} + + +/* These are in kernel/dma.c: */ +extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ +extern void free_dma(unsigned int dmanr); /* release it again */ + +/* From PCI */ + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* _ASM_DMA_H */ diff --git a/arch/mips/include/asm/ds1286.h b/arch/mips/include/asm/ds1286.h new file mode 100644 index 000000000000..6983b6ff0af3 --- /dev/null +++ b/arch/mips/include/asm/ds1286.h @@ -0,0 +1,15 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Machine dependent access functions for RTC registers. + * + * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef _ASM_DS1286_H +#define _ASM_DS1286_H + +#include <ds1286.h> + +#endif /* _ASM_DS1286_H */ diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h new file mode 100644 index 000000000000..ba1702e86931 --- /dev/null +++ b/arch/mips/include/asm/ds1287.h @@ -0,0 +1,27 @@ +/* + * DS1287 timer functions. + * + * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#ifndef __ASM_DS1287_H +#define __ASM_DS1287_H + +extern int ds1287_timer_state(void); +extern void ds1287_set_base_clock(unsigned int clock); +extern int ds1287_clockevent_init(int irq); + +#endif diff --git a/arch/mips/include/asm/dsp.h b/arch/mips/include/asm/dsp.h new file mode 100644 index 000000000000..e9bfc0813c72 --- /dev/null +++ b/arch/mips/include/asm/dsp.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2005 Mips Technologies + * Author: Chris Dearman, chris@mips.com derived from fpu.h + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_DSP_H +#define _ASM_DSP_H + +#include <asm/cpu.h> +#include <asm/cpu-features.h> +#include <asm/hazards.h> +#include <asm/mipsregs.h> + +#define DSP_DEFAULT 0x00000000 +#define DSP_MASK 0x3ff + +#define __enable_dsp_hazard() \ +do { \ + asm("_ehb"); \ +} while (0) + +static inline void __init_dsp(void) +{ + mthi1(0); + mtlo1(0); + mthi2(0); + mtlo2(0); + mthi3(0); + mtlo3(0); + wrdsp(DSP_DEFAULT, DSP_MASK); +} + +static inline void init_dsp(void) +{ + if (cpu_has_dsp) + __init_dsp(); +} + +#define __save_dsp(tsk) \ +do { \ + tsk->thread.dsp.dspr[0] = mfhi1(); \ + tsk->thread.dsp.dspr[1] = mflo1(); \ + tsk->thread.dsp.dspr[2] = mfhi2(); \ + tsk->thread.dsp.dspr[3] = mflo2(); \ + tsk->thread.dsp.dspr[4] = mfhi3(); \ + tsk->thread.dsp.dspr[5] = mflo3(); \ + tsk->thread.dsp.dspcontrol = rddsp(DSP_MASK); \ +} while (0) + +#define save_dsp(tsk) \ +do { \ + if (cpu_has_dsp) \ + __save_dsp(tsk); \ +} while (0) + +#define __restore_dsp(tsk) \ +do { \ + mthi1(tsk->thread.dsp.dspr[0]); \ + mtlo1(tsk->thread.dsp.dspr[1]); \ + mthi2(tsk->thread.dsp.dspr[2]); \ + mtlo2(tsk->thread.dsp.dspr[3]); \ + mthi3(tsk->thread.dsp.dspr[4]); \ + mtlo3(tsk->thread.dsp.dspr[5]); \ + wrdsp(tsk->thread.dsp.dspcontrol, DSP_MASK); \ +} while (0) + +#define restore_dsp(tsk) \ +do { \ + if (cpu_has_dsp) \ + __restore_dsp(tsk); \ +} while (0) + +#define __get_dsp_regs(tsk) \ +({ \ + if (tsk == current) \ + __save_dsp(current); \ + \ + tsk->thread.dsp.dspr; \ +}) + +#endif /* _ASM_DSP_H */ diff --git a/arch/mips/include/asm/edac.h b/arch/mips/include/asm/edac.h new file mode 100644 index 000000000000..4da0c1fe30d9 --- /dev/null +++ b/arch/mips/include/asm/edac.h @@ -0,0 +1,34 @@ +#ifndef ASM_EDAC_H +#define ASM_EDAC_H + +/* ECC atomic, DMA, SMP and interrupt safe scrub function */ + +static inline void atomic_scrub(void *va, u32 size) +{ + unsigned long *virt_addr = va; + unsigned long temp; + u32 i; + + for (i = 0; i < size / sizeof(unsigned long); i++) { + /* + * Very carefully read and write to memory atomically + * so we are interrupt, DMA and SMP safe. + * + * Intel: asm("lock; addl $0, %0"::"m"(*virt_addr)); + */ + + __asm__ __volatile__ ( + " .set mips2 \n" + "1: ll %0, %1 # atomic_scrub \n" + " addu %0, $0 \n" + " sc %0, %1 \n" + " beqz %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*virt_addr) + : "m" (*virt_addr)); + + virt_addr++; + } +} + +#endif diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h new file mode 100644 index 000000000000..f69f7acba637 --- /dev/null +++ b/arch/mips/include/asm/elf.h @@ -0,0 +1,371 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Much of this is taken from binutils and GNU libc ... + */ +#ifndef _ASM_ELF_H +#define _ASM_ELF_H + + +/* ELF header e_flags defines. */ +/* MIPS architecture level. */ +#define EF_MIPS_ARCH_1 0x00000000 /* -mips1 code. */ +#define EF_MIPS_ARCH_2 0x10000000 /* -mips2 code. */ +#define EF_MIPS_ARCH_3 0x20000000 /* -mips3 code. */ +#define EF_MIPS_ARCH_4 0x30000000 /* -mips4 code. */ +#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */ +#define EF_MIPS_ARCH_32 0x50000000 /* MIPS32 code. */ +#define EF_MIPS_ARCH_64 0x60000000 /* MIPS64 code. */ +#define EF_MIPS_ARCH_32R2 0x70000000 /* MIPS32 R2 code. */ +#define EF_MIPS_ARCH_64R2 0x80000000 /* MIPS64 R2 code. */ + +/* The ABI of a file. */ +#define EF_MIPS_ABI_O32 0x00001000 /* O32 ABI. */ +#define EF_MIPS_ABI_O64 0x00002000 /* O32 extended for 64 bit. */ + +#define PT_MIPS_REGINFO 0x70000000 +#define PT_MIPS_RTPROC 0x70000001 +#define PT_MIPS_OPTIONS 0x70000002 + +/* Flags in the e_flags field of the header */ +#define EF_MIPS_NOREORDER 0x00000001 +#define EF_MIPS_PIC 0x00000002 +#define EF_MIPS_CPIC 0x00000004 +#define EF_MIPS_ABI2 0x00000020 +#define EF_MIPS_OPTIONS_FIRST 0x00000080 +#define EF_MIPS_32BITMODE 0x00000100 +#define EF_MIPS_ABI 0x0000f000 +#define EF_MIPS_ARCH 0xf0000000 + +#define DT_MIPS_RLD_VERSION 0x70000001 +#define DT_MIPS_TIME_STAMP 0x70000002 +#define DT_MIPS_ICHECKSUM 0x70000003 +#define DT_MIPS_IVERSION 0x70000004 +#define DT_MIPS_FLAGS 0x70000005 + #define RHF_NONE 0x00000000 + #define RHF_HARDWAY 0x00000001 + #define RHF_NOTPOT 0x00000002 + #define RHF_SGI_ONLY 0x00000010 +#define DT_MIPS_BASE_ADDRESS 0x70000006 +#define DT_MIPS_CONFLICT 0x70000008 +#define DT_MIPS_LIBLIST 0x70000009 +#define DT_MIPS_LOCAL_GOTNO 0x7000000a +#define DT_MIPS_CONFLICTNO 0x7000000b +#define DT_MIPS_LIBLISTNO 0x70000010 +#define DT_MIPS_SYMTABNO 0x70000011 +#define DT_MIPS_UNREFEXTNO 0x70000012 +#define DT_MIPS_GOTSYM 0x70000013 +#define DT_MIPS_HIPAGENO 0x70000014 +#define DT_MIPS_RLD_MAP 0x70000016 + +#define R_MIPS_NONE 0 +#define R_MIPS_16 1 +#define R_MIPS_32 2 +#define R_MIPS_REL32 3 +#define R_MIPS_26 4 +#define R_MIPS_HI16 5 +#define R_MIPS_LO16 6 +#define R_MIPS_GPREL16 7 +#define R_MIPS_LITERAL 8 +#define R_MIPS_GOT16 9 +#define R_MIPS_PC16 10 +#define R_MIPS_CALL16 11 +#define R_MIPS_GPREL32 12 +/* The remaining relocs are defined on Irix, although they are not + in the MIPS ELF ABI. */ +#define R_MIPS_UNUSED1 13 +#define R_MIPS_UNUSED2 14 +#define R_MIPS_UNUSED3 15 +#define R_MIPS_SHIFT5 16 +#define R_MIPS_SHIFT6 17 +#define R_MIPS_64 18 +#define R_MIPS_GOT_DISP 19 +#define R_MIPS_GOT_PAGE 20 +#define R_MIPS_GOT_OFST 21 +/* + * The following two relocation types are specified in the MIPS ABI + * conformance guide version 1.2 but not yet in the psABI. + */ +#define R_MIPS_GOTHI16 22 +#define R_MIPS_GOTLO16 23 +#define R_MIPS_SUB 24 +#define R_MIPS_INSERT_A 25 +#define R_MIPS_INSERT_B 26 +#define R_MIPS_DELETE 27 +#define R_MIPS_HIGHER 28 +#define R_MIPS_HIGHEST 29 +/* + * The following two relocation types are specified in the MIPS ABI + * conformance guide version 1.2 but not yet in the psABI. + */ +#define R_MIPS_CALLHI16 30 +#define R_MIPS_CALLLO16 31 +/* + * This range is reserved for vendor specific relocations. + */ +#define R_MIPS_LOVENDOR 100 +#define R_MIPS_HIVENDOR 127 + +#define SHN_MIPS_ACCOMON 0xff00 /* Allocated common symbols */ +#define SHN_MIPS_TEXT 0xff01 /* Allocated test symbols. */ +#define SHN_MIPS_DATA 0xff02 /* Allocated data symbols. */ +#define SHN_MIPS_SCOMMON 0xff03 /* Small common symbols */ +#define SHN_MIPS_SUNDEFINED 0xff04 /* Small undefined symbols */ + +#define SHT_MIPS_LIST 0x70000000 +#define SHT_MIPS_CONFLICT 0x70000002 +#define SHT_MIPS_GPTAB 0x70000003 +#define SHT_MIPS_UCODE 0x70000004 +#define SHT_MIPS_DEBUG 0x70000005 +#define SHT_MIPS_REGINFO 0x70000006 +#define SHT_MIPS_PACKAGE 0x70000007 +#define SHT_MIPS_PACKSYM 0x70000008 +#define SHT_MIPS_RELD 0x70000009 +#define SHT_MIPS_IFACE 0x7000000b +#define SHT_MIPS_CONTENT 0x7000000c +#define SHT_MIPS_OPTIONS 0x7000000d +#define SHT_MIPS_SHDR 0x70000010 +#define SHT_MIPS_FDESC 0x70000011 +#define SHT_MIPS_EXTSYM 0x70000012 +#define SHT_MIPS_DENSE 0x70000013 +#define SHT_MIPS_PDESC 0x70000014 +#define SHT_MIPS_LOCSYM 0x70000015 +#define SHT_MIPS_AUXSYM 0x70000016 +#define SHT_MIPS_OPTSYM 0x70000017 +#define SHT_MIPS_LOCSTR 0x70000018 +#define SHT_MIPS_LINE 0x70000019 +#define SHT_MIPS_RFDESC 0x7000001a +#define SHT_MIPS_DELTASYM 0x7000001b +#define SHT_MIPS_DELTAINST 0x7000001c +#define SHT_MIPS_DELTACLASS 0x7000001d +#define SHT_MIPS_DWARF 0x7000001e +#define SHT_MIPS_DELTADECL 0x7000001f +#define SHT_MIPS_SYMBOL_LIB 0x70000020 +#define SHT_MIPS_EVENTS 0x70000021 +#define SHT_MIPS_TRANSLATE 0x70000022 +#define SHT_MIPS_PIXIE 0x70000023 +#define SHT_MIPS_XLATE 0x70000024 +#define SHT_MIPS_XLATE_DEBUG 0x70000025 +#define SHT_MIPS_WHIRL 0x70000026 +#define SHT_MIPS_EH_REGION 0x70000027 +#define SHT_MIPS_XLATE_OLD 0x70000028 +#define SHT_MIPS_PDR_EXCEPTION 0x70000029 + +#define SHF_MIPS_GPREL 0x10000000 +#define SHF_MIPS_MERGE 0x20000000 +#define SHF_MIPS_ADDR 0x40000000 +#define SHF_MIPS_STRING 0x80000000 +#define SHF_MIPS_NOSTRIP 0x08000000 +#define SHF_MIPS_LOCAL 0x04000000 +#define SHF_MIPS_NAMES 0x02000000 +#define SHF_MIPS_NODUPES 0x01000000 + +#ifndef ELF_ARCH +/* ELF register definitions */ +#define ELF_NGREG 45 +#define ELF_NFPREG 33 + +typedef unsigned long elf_greg_t; +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef double elf_fpreg_t; +typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; + +#ifdef CONFIG_32BIT + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(hdr) \ +({ \ + int __res = 1; \ + struct elfhdr *__h = (hdr); \ + \ + if (__h->e_machine != EM_MIPS) \ + __res = 0; \ + if (__h->e_ident[EI_CLASS] != ELFCLASS32) \ + __res = 0; \ + if ((__h->e_flags & EF_MIPS_ABI2) != 0) \ + __res = 0; \ + if (((__h->e_flags & EF_MIPS_ABI) != 0) && \ + ((__h->e_flags & EF_MIPS_ABI) != EF_MIPS_ABI_O32)) \ + __res = 0; \ + \ + __res; \ +}) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 + +#endif /* CONFIG_32BIT */ + +#ifdef CONFIG_64BIT +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(hdr) \ +({ \ + int __res = 1; \ + struct elfhdr *__h = (hdr); \ + \ + if (__h->e_machine != EM_MIPS) \ + __res = 0; \ + if (__h->e_ident[EI_CLASS] != ELFCLASS64) \ + __res = 0; \ + \ + __res; \ +}) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS64 + +#endif /* CONFIG_64BIT */ + +/* + * These are used to set parameters in the core dumps. + */ +#ifdef __MIPSEB__ +#define ELF_DATA ELFDATA2MSB +#elif __MIPSEL__ +#define ELF_DATA ELFDATA2LSB +#endif +#define ELF_ARCH EM_MIPS + +#endif /* !defined(ELF_ARCH) */ + +struct mips_abi; + +extern struct mips_abi mips_abi; +extern struct mips_abi mips_abi_32; +extern struct mips_abi mips_abi_n32; + +#ifdef CONFIG_32BIT + +#define SET_PERSONALITY(ex, ibcs2) \ +do { \ + if (ibcs2) \ + set_personality(PER_SVR4); \ + set_personality(PER_LINUX); \ + \ + current->thread.abi = &mips_abi; \ +} while (0) + +#endif /* CONFIG_32BIT */ + +#ifdef CONFIG_64BIT + +#ifdef CONFIG_MIPS32_N32 +#define __SET_PERSONALITY32_N32() \ + do { \ + set_thread_flag(TIF_32BIT_ADDR); \ + current->thread.abi = &mips_abi_n32; \ + } while (0) +#else +#define __SET_PERSONALITY32_N32() \ + do { } while (0) +#endif + +#ifdef CONFIG_MIPS32_O32 +#define __SET_PERSONALITY32_O32() \ + do { \ + set_thread_flag(TIF_32BIT_REGS); \ + set_thread_flag(TIF_32BIT_ADDR); \ + current->thread.abi = &mips_abi_32; \ + } while (0) +#else +#define __SET_PERSONALITY32_O32() \ + do { } while (0) +#endif + +#ifdef CONFIG_MIPS32_COMPAT +#define __SET_PERSONALITY32(ex) \ +do { \ + if ((((ex).e_flags & EF_MIPS_ABI2) != 0) && \ + ((ex).e_flags & EF_MIPS_ABI) == 0) \ + __SET_PERSONALITY32_N32(); \ + else \ + __SET_PERSONALITY32_O32(); \ +} while (0) +#else +#define __SET_PERSONALITY32(ex) do { } while (0) +#endif + +#define SET_PERSONALITY(ex, ibcs2) \ +do { \ + clear_thread_flag(TIF_32BIT_REGS); \ + clear_thread_flag(TIF_32BIT_ADDR); \ + \ + if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ + __SET_PERSONALITY32(ex); \ + else \ + current->thread.abi = &mips_abi; \ + \ + if (ibcs2) \ + set_personality(PER_SVR4); \ + else if (current->personality != PER_LINUX32) \ + set_personality(PER_LINUX); \ +} while (0) + +#endif /* CONFIG_64BIT */ + +struct task_struct; + +extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs); +extern int dump_task_regs(struct task_struct *, elf_gregset_t *); +extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); + +#define ELF_CORE_COPY_REGS(elf_regs, regs) \ + elf_dump_regs((elf_greg_t *)&(elf_regs), regs); +#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) +#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \ + dump_task_fpu(tsk, elf_fpregs) + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE PAGE_SIZE + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. This could be done in userspace, + but it's not easy, and we've already done it here. */ + +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. + + For the moment, we have only optimizations for the Intel generations, + but that could change... */ + +#define ELF_PLATFORM (NULL) + +/* + * See comments in asm-alpha/elf.h, this is the same thing + * on the MIPS. + */ +#define ELF_PLAT_INIT(_r, load_addr) do { \ + _r->regs[1] = _r->regs[2] = _r->regs[3] = _r->regs[4] = 0; \ + _r->regs[5] = _r->regs[6] = _r->regs[7] = _r->regs[8] = 0; \ + _r->regs[9] = _r->regs[10] = _r->regs[11] = _r->regs[12] = 0; \ + _r->regs[13] = _r->regs[14] = _r->regs[15] = _r->regs[16] = 0; \ + _r->regs[17] = _r->regs[18] = _r->regs[19] = _r->regs[20] = 0; \ + _r->regs[21] = _r->regs[22] = _r->regs[23] = _r->regs[24] = 0; \ + _r->regs[25] = _r->regs[26] = _r->regs[27] = _r->regs[28] = 0; \ + _r->regs[30] = _r->regs[31] = 0; \ +} while (0) + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#ifndef ELF_ET_DYN_BASE +#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) +#endif + +#endif /* _ASM_ELF_H */ diff --git a/arch/mips/include/asm/emergency-restart.h b/arch/mips/include/asm/emergency-restart.h new file mode 100644 index 000000000000..108d8c48e42e --- /dev/null +++ b/arch/mips/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include <asm-generic/emergency-restart.h> + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/mips/include/asm/emma2rh/emma2rh.h b/arch/mips/include/asm/emma2rh/emma2rh.h new file mode 100644 index 000000000000..6a1af0af51e3 --- /dev/null +++ b/arch/mips/include/asm/emma2rh/emma2rh.h @@ -0,0 +1,333 @@ +/* + * include/asm-mips/emma2rh/emma2rh.h + * This file is EMMA2RH common header. + * + * Copyright (C) NEC Electronics Corporation 2005-2006 + * + * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_EMMA2RH_EMMA2RH_H +#define __ASM_EMMA2RH_EMMA2RH_H + +#include <irq.h> + +/* + * EMMA2RH registers + */ +#define REGBASE 0x10000000 + +#define EMMA2RH_BHIF_STRAP_0 (0x000010+REGBASE) +#define EMMA2RH_BHIF_INT_ST_0 (0x000030+REGBASE) +#define EMMA2RH_BHIF_INT_ST_1 (0x000034+REGBASE) +#define EMMA2RH_BHIF_INT_ST_2 (0x000038+REGBASE) +#define EMMA2RH_BHIF_INT_EN_0 (0x000040+REGBASE) +#define EMMA2RH_BHIF_INT_EN_1 (0x000044+REGBASE) +#define EMMA2RH_BHIF_INT_EN_2 (0x000048+REGBASE) +#define EMMA2RH_BHIF_INT1_EN_0 (0x000050+REGBASE) +#define EMMA2RH_BHIF_INT1_EN_1 (0x000054+REGBASE) +#define EMMA2RH_BHIF_INT1_EN_2 (0x000058+REGBASE) +#define EMMA2RH_BHIF_SW_INT (0x000070+REGBASE) +#define EMMA2RH_BHIF_SW_INT_EN (0x000080+REGBASE) +#define EMMA2RH_BHIF_SW_INT_CLR (0x000090+REGBASE) +#define EMMA2RH_BHIF_MAIN_CTRL (0x0000b4+REGBASE) +#define EMMA2RH_BHIF_EXCEPT_VECT_BASE_ADDRESS (0x0000c0+REGBASE) +#define EMMA2RH_GPIO_DIR (0x110d20+REGBASE) +#define EMMA2RH_GPIO_INT_ST (0x110d30+REGBASE) +#define EMMA2RH_GPIO_INT_MASK (0x110d3c+REGBASE) +#define EMMA2RH_GPIO_INT_MODE (0x110d48+REGBASE) +#define EMMA2RH_GPIO_INT_CND_A (0x110d54+REGBASE) +#define EMMA2RH_GPIO_INT_CND_B (0x110d60+REGBASE) +#define EMMA2RH_PBRD_INT_EN (0x100010+REGBASE) +#define EMMA2RH_PBRD_CLKSEL (0x100028+REGBASE) +#define EMMA2RH_PFUR0_BASE (0x101000+REGBASE) +#define EMMA2RH_PFUR1_BASE (0x102000+REGBASE) +#define EMMA2RH_PFUR2_BASE (0x103000+REGBASE) +#define EMMA2RH_PIIC0_BASE (0x107000+REGBASE) +#define EMMA2RH_PIIC1_BASE (0x108000+REGBASE) +#define EMMA2RH_PIIC2_BASE (0x109000+REGBASE) +#define EMMA2RH_PCI_CONTROL (0x200000+REGBASE) +#define EMMA2RH_PCI_ARBIT_CTR (0x200004+REGBASE) +#define EMMA2RH_PCI_IWIN0_CTR (0x200010+REGBASE) +#define EMMA2RH_PCI_IWIN1_CTR (0x200014+REGBASE) +#define EMMA2RH_PCI_INIT_ESWP (0x200018+REGBASE) +#define EMMA2RH_PCI_INT (0x200020+REGBASE) +#define EMMA2RH_PCI_INT_EN (0x200024+REGBASE) +#define EMMA2RH_PCI_TWIN_CTR (0x200030+REGBASE) +#define EMMA2RH_PCI_TWIN_BADR (0x200034+REGBASE) +#define EMMA2RH_PCI_TWIN0_DADR (0x200038+REGBASE) +#define EMMA2RH_PCI_TWIN1_DADR (0x20003c+REGBASE) + +/* + * Memory map (physical address) + * + * Note most of the following address must be properly aligned by the + * corresponding size. For example, if PCI_IO_SIZE is 16MB, then + * PCI_IO_BASE must be aligned along 16MB boundary. + */ + +/* the actual ram size is detected at run-time */ +#define EMMA2RH_RAM_BASE 0x00000000 +#define EMMA2RH_RAM_SIZE 0x10000000 /* less than 256MB */ + +#define EMMA2RH_IO_BASE 0x10000000 +#define EMMA2RH_IO_SIZE 0x01000000 /* 16 MB */ + +#define EMMA2RH_GENERALIO_BASE 0x11000000 +#define EMMA2RH_GENERALIO_SIZE 0x01000000 /* 16 MB */ + +#define EMMA2RH_PCI_IO_BASE 0x12000000 +#define EMMA2RH_PCI_IO_SIZE 0x02000000 /* 32 MB */ + +#define EMMA2RH_PCI_MEM_BASE 0x14000000 +#define EMMA2RH_PCI_MEM_SIZE 0x08000000 /* 128 MB */ + +#define EMMA2RH_ROM_BASE 0x1c000000 +#define EMMA2RH_ROM_SIZE 0x04000000 /* 64 MB */ + +#define EMMA2RH_PCI_CONFIG_BASE EMMA2RH_PCI_IO_BASE +#define EMMA2RH_PCI_CONFIG_SIZE EMMA2RH_PCI_IO_SIZE + +#define NUM_CPU_IRQ 8 +#define NUM_EMMA2RH_IRQ 96 + +#define CPU_EMMA2RH_CASCADE 2 +#define CPU_IRQ_BASE MIPS_CPU_IRQ_BASE +#define EMMA2RH_IRQ_BASE (CPU_IRQ_BASE + NUM_CPU_IRQ) + +/* + * emma2rh irq defs + */ + +#define EMMA2RH_IRQ_INT0 (0 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT1 (1 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT2 (2 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT3 (3 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT4 (4 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT5 (5 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT6 (6 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT7 (7 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT8 (8 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT9 (9 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT10 (10 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT11 (11 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT12 (12 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT13 (13 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT14 (14 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT15 (15 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT16 (16 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT17 (17 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT18 (18 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT19 (19 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT20 (20 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT21 (21 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT22 (22 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT23 (23 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT24 (24 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT25 (25 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT26 (26 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT27 (27 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT28 (28 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT29 (29 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT30 (30 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT31 (31 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT32 (32 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT33 (33 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT34 (34 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT35 (35 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT36 (36 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT37 (37 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT38 (38 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT39 (39 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT40 (40 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT41 (41 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT42 (42 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT43 (43 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT44 (44 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT45 (45 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT46 (46 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT47 (47 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT48 (48 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT49 (49 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT50 (50 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT51 (51 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT52 (52 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT53 (53 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT54 (54 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT55 (55 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT56 (56 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT57 (57 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT58 (58 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT59 (59 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT60 (60 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT61 (61 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT62 (62 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT63 (63 + EMMA2RH_IRQ_BASE) + +#define EMMA2RH_IRQ_PFUR0 EMMA2RH_IRQ_INT49 +#define EMMA2RH_IRQ_PFUR1 EMMA2RH_IRQ_INT50 +#define EMMA2RH_IRQ_PFUR2 EMMA2RH_IRQ_INT51 +#define EMMA2RH_IRQ_PIIC0 EMMA2RH_IRQ_INT56 +#define EMMA2RH_IRQ_PIIC1 EMMA2RH_IRQ_INT57 +#define EMMA2RH_IRQ_PIIC2 EMMA2RH_IRQ_INT58 + +/* + * EMMA2RH Register Access + */ + +#define EMMA2RH_BASE (0xa0000000) + +static inline void emma2rh_sync(void) +{ + volatile u32 *p = (volatile u32 *)0xbfc00000; + (void)(*p); +} + +static inline void emma2rh_out32(u32 offset, u32 val) +{ + *(volatile u32 *)(EMMA2RH_BASE | offset) = val; + emma2rh_sync(); +} + +static inline u32 emma2rh_in32(u32 offset) +{ + u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset); + emma2rh_sync(); + return val; +} + +static inline void emma2rh_out16(u32 offset, u16 val) +{ + *(volatile u16 *)(EMMA2RH_BASE | offset) = val; + emma2rh_sync(); +} + +static inline u16 emma2rh_in16(u32 offset) +{ + u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset); + emma2rh_sync(); + return val; +} + +static inline void emma2rh_out8(u32 offset, u8 val) +{ + *(volatile u8 *)(EMMA2RH_BASE | offset) = val; + emma2rh_sync(); +} + +static inline u8 emma2rh_in8(u32 offset) +{ + u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset); + emma2rh_sync(); + return val; +} + +/** + * IIC registers map + **/ + +/*---------------------------------------------------------------------------*/ +/* CNT - Control register (00H R/W) */ +/*---------------------------------------------------------------------------*/ +#define SPT 0x00000001 +#define STT 0x00000002 +#define ACKE 0x00000004 +#define WTIM 0x00000008 +#define SPIE 0x00000010 +#define WREL 0x00000020 +#define LREL 0x00000040 +#define IICE 0x00000080 +#define CNT_RESERVED 0x000000ff /* reserved bit 0 */ + +#define I2C_EMMA_START (IICE | STT) +#define I2C_EMMA_STOP (IICE | SPT) +#define I2C_EMMA_REPSTART I2C_EMMA_START + +/*---------------------------------------------------------------------------*/ +/* STA - Status register (10H Read) */ +/*---------------------------------------------------------------------------*/ +#define MSTS 0x00000080 +#define ALD 0x00000040 +#define EXC 0x00000020 +#define COI 0x00000010 +#define TRC 0x00000008 +#define ACKD 0x00000004 +#define STD 0x00000002 +#define SPD 0x00000001 + +/*---------------------------------------------------------------------------*/ +/* CSEL - Clock select register (20H R/W) */ +/*---------------------------------------------------------------------------*/ +#define FCL 0x00000080 +#define ND50 0x00000040 +#define CLD 0x00000020 +#define DAD 0x00000010 +#define SMC 0x00000008 +#define DFC 0x00000004 +#define CL 0x00000003 +#define CSEL_RESERVED 0x000000ff /* reserved bit 0 */ + +#define FAST397 0x0000008b +#define FAST297 0x0000008a +#define FAST347 0x0000000b +#define FAST260 0x0000000a +#define FAST130 0x00000008 +#define STANDARD108 0x00000083 +#define STANDARD83 0x00000082 +#define STANDARD95 0x00000003 +#define STANDARD73 0x00000002 +#define STANDARD36 0x00000001 +#define STANDARD71 0x00000000 + +/*---------------------------------------------------------------------------*/ +/* SVA - Slave address register (30H R/W) */ +/*---------------------------------------------------------------------------*/ +#define SVA 0x000000fe + +/*---------------------------------------------------------------------------*/ +/* SHR - Shift register (40H R/W) */ +/*---------------------------------------------------------------------------*/ +#define SR 0x000000ff + +/*---------------------------------------------------------------------------*/ +/* INT - Interrupt register (50H R/W) */ +/* INTM - Interrupt mask register (60H R/W) */ +/*---------------------------------------------------------------------------*/ +#define INTE0 0x00000001 + +/*********************************************************************** + * I2C registers + *********************************************************************** + */ +#define I2C_EMMA_CNT 0x00 +#define I2C_EMMA_STA 0x10 +#define I2C_EMMA_CSEL 0x20 +#define I2C_EMMA_SVA 0x30 +#define I2C_EMMA_SHR 0x40 +#define I2C_EMMA_INT 0x50 +#define I2C_EMMA_INTM 0x60 + +/* + * include the board dependent part + */ +#if defined(CONFIG_MARKEINS) +#include <asm/emma2rh/markeins.h> +#else +#error "Unknown EMMA2RH board!" +#endif + +#endif /* __ASM_EMMA2RH_EMMA2RH_H */ diff --git a/arch/mips/include/asm/emma2rh/markeins.h b/arch/mips/include/asm/emma2rh/markeins.h new file mode 100644 index 000000000000..973b0628490d --- /dev/null +++ b/arch/mips/include/asm/emma2rh/markeins.h @@ -0,0 +1,75 @@ +/* + * include/asm-mips/emma2rh/markeins.h + * This file is EMMA2RH board depended header. + * + * Copyright (C) NEC Electronics Corporation 2005-2006 + * + * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef MARKEINS_H +#define MARKEINS_H + +#define NUM_EMMA2RH_IRQ_SW 32 +#define NUM_EMMA2RH_IRQ_GPIO 32 + +#define EMMA2RH_SW_CASCADE (EMMA2RH_IRQ_INT7 - EMMA2RH_IRQ_INT0) +#define EMMA2RH_GPIO_CASCADE (EMMA2RH_IRQ_INT46 - EMMA2RH_IRQ_INT0) + +#define EMMA2RH_SW_IRQ_BASE (EMMA2RH_IRQ_BASE + NUM_EMMA2RH_IRQ) +#define EMMA2RH_GPIO_IRQ_BASE (EMMA2RH_SW_IRQ_BASE + NUM_EMMA2RH_IRQ_SW) + +#define EMMA2RH_SW_IRQ_INT0 (0+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT1 (1+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT2 (2+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT3 (3+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT4 (4+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT5 (5+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT6 (6+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT7 (7+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT8 (8+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT9 (9+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT10 (10+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT11 (11+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT12 (12+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT13 (13+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT14 (14+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT15 (15+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT16 (16+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT17 (17+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT18 (18+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT19 (19+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT20 (20+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT21 (21+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT22 (22+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT23 (23+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT24 (24+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT25 (25+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT26 (26+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT27 (27+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT28 (28+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT29 (29+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT30 (30+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT31 (31+EMMA2RH_SW_IRQ_BASE) + +#define MARKEINS_PCI_IRQ_INTA EMMA2RH_GPIO_IRQ_BASE+15 +#define MARKEINS_PCI_IRQ_INTB EMMA2RH_GPIO_IRQ_BASE+16 +#define MARKEINS_PCI_IRQ_INTC EMMA2RH_GPIO_IRQ_BASE+17 +#define MARKEINS_PCI_IRQ_INTD EMMA2RH_GPIO_IRQ_BASE+18 + +#endif /* CONFIG_MARKEINS */ diff --git a/arch/mips/include/asm/errno.h b/arch/mips/include/asm/errno.h new file mode 100644 index 000000000000..3c0d840e4577 --- /dev/null +++ b/arch/mips/include/asm/errno.h @@ -0,0 +1,131 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle + */ +#ifndef _ASM_ERRNO_H +#define _ASM_ERRNO_H + +/* + * These error numbers are intended to be MIPS ABI compatible + */ + +#include <asm-generic/errno-base.h> + +#define ENOMSG 35 /* No message of desired type */ +#define EIDRM 36 /* Identifier removed */ +#define ECHRNG 37 /* Channel number out of range */ +#define EL2NSYNC 38 /* Level 2 not synchronized */ +#define EL3HLT 39 /* Level 3 halted */ +#define EL3RST 40 /* Level 3 reset */ +#define ELNRNG 41 /* Link number out of range */ +#define EUNATCH 42 /* Protocol driver not attached */ +#define ENOCSI 43 /* No CSI structure available */ +#define EL2HLT 44 /* Level 2 halted */ +#define EDEADLK 45 /* Resource deadlock would occur */ +#define ENOLCK 46 /* No record locks available */ +#define EBADE 50 /* Invalid exchange */ +#define EBADR 51 /* Invalid request descriptor */ +#define EXFULL 52 /* Exchange full */ +#define ENOANO 53 /* No anode */ +#define EBADRQC 54 /* Invalid request code */ +#define EBADSLT 55 /* Invalid slot */ +#define EDEADLOCK 56 /* File locking deadlock error */ +#define EBFONT 59 /* Bad font file format */ +#define ENOSTR 60 /* Device not a stream */ +#define ENODATA 61 /* No data available */ +#define ETIME 62 /* Timer expired */ +#define ENOSR 63 /* Out of streams resources */ +#define ENONET 64 /* Machine is not on the network */ +#define ENOPKG 65 /* Package not installed */ +#define EREMOTE 66 /* Object is remote */ +#define ENOLINK 67 /* Link has been severed */ +#define EADV 68 /* Advertise error */ +#define ESRMNT 69 /* Srmount error */ +#define ECOMM 70 /* Communication error on send */ +#define EPROTO 71 /* Protocol error */ +#define EDOTDOT 73 /* RFS specific error */ +#define EMULTIHOP 74 /* Multihop attempted */ +#define EBADMSG 77 /* Not a data message */ +#define ENAMETOOLONG 78 /* File name too long */ +#define EOVERFLOW 79 /* Value too large for defined data type */ +#define ENOTUNIQ 80 /* Name not unique on network */ +#define EBADFD 81 /* File descriptor in bad state */ +#define EREMCHG 82 /* Remote address changed */ +#define ELIBACC 83 /* Can not access a needed shared library */ +#define ELIBBAD 84 /* Accessing a corrupted shared library */ +#define ELIBSCN 85 /* .lib section in a.out corrupted */ +#define ELIBMAX 86 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 87 /* Cannot exec a shared library directly */ +#define EILSEQ 88 /* Illegal byte sequence */ +#define ENOSYS 89 /* Function not implemented */ +#define ELOOP 90 /* Too many symbolic links encountered */ +#define ERESTART 91 /* Interrupted system call should be restarted */ +#define ESTRPIPE 92 /* Streams pipe error */ +#define ENOTEMPTY 93 /* Directory not empty */ +#define EUSERS 94 /* Too many users */ +#define ENOTSOCK 95 /* Socket operation on non-socket */ +#define EDESTADDRREQ 96 /* Destination address required */ +#define EMSGSIZE 97 /* Message too long */ +#define EPROTOTYPE 98 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 99 /* Protocol not available */ +#define EPROTONOSUPPORT 120 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 121 /* Socket type not supported */ +#define EOPNOTSUPP 122 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 123 /* Protocol family not supported */ +#define EAFNOSUPPORT 124 /* Address family not supported by protocol */ +#define EADDRINUSE 125 /* Address already in use */ +#define EADDRNOTAVAIL 126 /* Cannot assign requested address */ +#define ENETDOWN 127 /* Network is down */ +#define ENETUNREACH 128 /* Network is unreachable */ +#define ENETRESET 129 /* Network dropped connection because of reset */ +#define ECONNABORTED 130 /* Software caused connection abort */ +#define ECONNRESET 131 /* Connection reset by peer */ +#define ENOBUFS 132 /* No buffer space available */ +#define EISCONN 133 /* Transport endpoint is already connected */ +#define ENOTCONN 134 /* Transport endpoint is not connected */ +#define EUCLEAN 135 /* Structure needs cleaning */ +#define ENOTNAM 137 /* Not a XENIX named type file */ +#define ENAVAIL 138 /* No XENIX semaphores available */ +#define EISNAM 139 /* Is a named type file */ +#define EREMOTEIO 140 /* Remote I/O error */ +#define EINIT 141 /* Reserved */ +#define EREMDEV 142 /* Error 142 */ +#define ESHUTDOWN 143 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 144 /* Too many references: cannot splice */ +#define ETIMEDOUT 145 /* Connection timed out */ +#define ECONNREFUSED 146 /* Connection refused */ +#define EHOSTDOWN 147 /* Host is down */ +#define EHOSTUNREACH 148 /* No route to host */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define EALREADY 149 /* Operation already in progress */ +#define EINPROGRESS 150 /* Operation now in progress */ +#define ESTALE 151 /* Stale NFS file handle */ +#define ECANCELED 158 /* AIO operation canceled */ + +/* + * These error are Linux extensions. + */ +#define ENOMEDIUM 159 /* No medium found */ +#define EMEDIUMTYPE 160 /* Wrong medium type */ +#define ENOKEY 161 /* Required key not available */ +#define EKEYEXPIRED 162 /* Key has expired */ +#define EKEYREVOKED 163 /* Key has been revoked */ +#define EKEYREJECTED 164 /* Key was rejected by service */ + +/* for robust mutexes */ +#define EOWNERDEAD 165 /* Owner died */ +#define ENOTRECOVERABLE 166 /* State not recoverable */ + +#define EDQUOT 1133 /* Quota exceeded */ + +#ifdef __KERNEL__ + +/* The biggest error number defined here or in <linux/errno.h>. */ +#define EMAXERRNO 1133 + +#endif /* __KERNEL__ */ + +#endif /* _ASM_ERRNO_H */ diff --git a/arch/mips/include/asm/fb.h b/arch/mips/include/asm/fb.h new file mode 100644 index 000000000000..bd3f68c9ddfc --- /dev/null +++ b/arch/mips/include/asm/fb.h @@ -0,0 +1,19 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include <linux/fb.h> +#include <linux/fs.h> +#include <asm/page.h> + +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); +} + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/mips/include/asm/fcntl.h b/arch/mips/include/asm/fcntl.h new file mode 100644 index 000000000000..2a52333a062d --- /dev/null +++ b/arch/mips/include/asm/fcntl.h @@ -0,0 +1,61 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 97, 98, 99, 2003, 05 Ralf Baechle + */ +#ifndef _ASM_FCNTL_H +#define _ASM_FCNTL_H + + +#define O_APPEND 0x0008 +#define O_SYNC 0x0010 +#define O_NONBLOCK 0x0080 +#define O_CREAT 0x0100 /* not fcntl */ +#define O_TRUNC 0x0200 /* not fcntl */ +#define O_EXCL 0x0400 /* not fcntl */ +#define O_NOCTTY 0x0800 /* not fcntl */ +#define FASYNC 0x1000 /* fcntl, for BSD compatibility */ +#define O_LARGEFILE 0x2000 /* allow large file opens */ +#define O_DIRECT 0x8000 /* direct disk access hint */ + +#define F_GETLK 14 +#define F_SETLK 6 +#define F_SETLKW 7 + +#define F_SETOWN 24 /* for sockets. */ +#define F_GETOWN 23 /* for sockets. */ + +#ifndef __mips64 +#define F_GETLK64 33 /* using 'struct flock64' */ +#define F_SETLK64 34 +#define F_SETLKW64 35 +#endif + +/* + * The flavours of struct flock. "struct flock" is the ABI compliant + * variant. Finally struct flock64 is the LFS variant of struct flock. As + * a historic accident and inconsistence with the ABI definition it doesn't + * contain all the same fields as struct flock. + */ + +#ifdef CONFIG_32BIT + +struct flock { + short l_type; + short l_whence; + off_t l_start; + off_t l_len; + long l_sysid; + __kernel_pid_t l_pid; + long pad[4]; +}; + +#define HAVE_ARCH_STRUCT_FLOCK + +#endif /* CONFIG_32BIT */ + +#include <asm-generic/fcntl.h> + +#endif /* _ASM_FCNTL_H */ diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h new file mode 100644 index 000000000000..9cc8522a394f --- /dev/null +++ b/arch/mips/include/asm/fixmap.h @@ -0,0 +1,118 @@ +/* + * fixmap.h: compile-time virtual memory allocation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Ingo Molnar + * + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 + */ + +#ifndef _ASM_FIXMAP_H +#define _ASM_FIXMAP_H + +#include <asm/page.h> +#ifdef CONFIG_HIGHMEM +#include <linux/threads.h> +#include <asm/kmap_types.h> +#endif + +/* + * Here we define all the compile-time 'special' virtual + * addresses. The point is to have a constant address at + * compile time, but to set the physical address only + * in the boot process. We allocate these special addresses + * from the end of virtual memory (0xfffff000) backwards. + * Also this lets us do fail-safe vmalloc(), we + * can guarantee that these special addresses and + * vmalloc()-ed addresses never overlap. + * + * these 'compile-time allocated' memory buffers are + * fixed-size 4k pages. (or larger if used with an increment + * highger than 1) use fixmap_set(idx,phys) to associate + * physical memory with fixmap indices. + * + * TLB entries of such buffers will not be flushed across + * task switches. + */ + +/* + * on UP currently we will have no trace of the fixmap mechanizm, + * no page table allocations, etc. This might change in the + * future, say framebuffers for the console driver(s) could be + * fix-mapped? + */ +enum fixed_addresses { +#define FIX_N_COLOURS 8 + FIX_CMAP_BEGIN, +#ifdef CONFIG_MIPS_MT_SMTC + FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS), +#else + FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS, +#endif +#ifdef CONFIG_HIGHMEM + /* reserved pte's for temporary kernel mappings */ + FIX_KMAP_BEGIN = FIX_CMAP_END + 1, + FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, +#endif + __end_of_fixed_addresses +}; + +/* + * used by vmalloc.c. + * + * Leave one empty page between vmalloc'ed areas and + * the start of the fixmap, and leave one page empty + * at the top of mem.. + */ +#if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX) +#define FIXADDR_TOP ((unsigned long)(long)(int)(0xff000000 - 0x20000)) +#else +#define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000) +#endif +#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) + +#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) +#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) + +extern void __this_fixmap_does_not_exist(void); + +/* + * 'index to address' translation. If anyone tries to use the idx + * directly without tranlation, we catch the bug with a NULL-deference + * kernel oops. Illegal ranges of incoming indices are caught too. + */ +static inline unsigned long fix_to_virt(const unsigned int idx) +{ + /* + * this branch gets completely eliminated after inlining, + * except when someone tries to use fixaddr indices in an + * illegal way. (such as mixing up address types or using + * out-of-range indices). + * + * If it doesn't get removed, the linker will complain + * loudly with a reasonably clear error message.. + */ + if (idx >= __end_of_fixed_addresses) + __this_fixmap_does_not_exist(); + + return __fix_to_virt(idx); +} + +static inline unsigned long virt_to_fix(const unsigned long vaddr) +{ + BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); + return __virt_to_fix(vaddr); +} + +/* + * Called from pgtable_init() + */ +extern void fixrange_init(unsigned long start, unsigned long end, + pgd_t *pgd_base); + + +#endif diff --git a/arch/mips/include/asm/floppy.h b/arch/mips/include/asm/floppy.h new file mode 100644 index 000000000000..992d232adc83 --- /dev/null +++ b/arch/mips/include/asm/floppy.h @@ -0,0 +1,56 @@ +/* + * Architecture specific parts of the Floppy driver + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 - 2000 Ralf Baechle + */ +#ifndef _ASM_FLOPPY_H +#define _ASM_FLOPPY_H + +#include <linux/dma-mapping.h> + +static inline void fd_cacheflush(char * addr, long size) +{ + dma_cache_sync(NULL, addr, size, DMA_BIDIRECTIONAL); +} + +#define MAX_BUFFER_SECTORS 24 + + +/* + * And on Mips's the CMOS info fails also ... + * + * FIXME: This information should come from the ARC configuration tree + * or whereever a particular machine has stored this ... + */ +#define FLOPPY0_TYPE fd_drive_type(0) +#define FLOPPY1_TYPE fd_drive_type(1) + +#define FDC1 fd_getfdaddr1(); + +#define N_FDC 1 /* do you *really* want a second controller? */ +#define N_DRIVE 8 + +/* + * The DMA channel used by the floppy controller cannot access data at + * addresses >= 16MB + * + * Went back to the 1MB limit, as some people had problems with the floppy + * driver otherwise. It doesn't matter much for performance anyway, as most + * floppy accesses go through the track buffer. + * + * On MIPSes using vdma, this actually means that *all* transfers go thru + * the * track buffer since 0x1000000 is always smaller than KSEG0/1. + * Actually this needs to be a bit more complicated since the so much different + * hardware available with MIPS CPUs ... + */ +#define CROSS_64KB(a, s) ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64) + +#define EXTRA_FLOPPY_PARAMS + +#include <floppy.h> + +#endif /* _ASM_FLOPPY_H */ diff --git a/arch/mips/include/asm/fpregdef.h b/arch/mips/include/asm/fpregdef.h new file mode 100644 index 000000000000..2b5fddc8f487 --- /dev/null +++ b/arch/mips/include/asm/fpregdef.h @@ -0,0 +1,99 @@ +/* + * Definitions for the FPU register names + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999 Ralf Baechle + * Copyright (C) 1985 MIPS Computer Systems, Inc. + * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_FPREGDEF_H +#define _ASM_FPREGDEF_H + +#include <asm/sgidefs.h> + +#if _MIPS_SIM == _MIPS_SIM_ABI32 + +/* + * These definitions only cover the R3000-ish 16/32 register model. + * But we're trying to be R3000 friendly anyway ... + */ +#define fv0 $f0 /* return value */ +#define fv0f $f1 +#define fv1 $f2 +#define fv1f $f3 +#define fa0 $f12 /* argument registers */ +#define fa0f $f13 +#define fa1 $f14 +#define fa1f $f15 +#define ft0 $f4 /* caller saved */ +#define ft0f $f5 +#define ft1 $f6 +#define ft1f $f7 +#define ft2 $f8 +#define ft2f $f9 +#define ft3 $f10 +#define ft3f $f11 +#define ft4 $f16 +#define ft4f $f17 +#define ft5 $f18 +#define ft5f $f19 +#define fs0 $f20 /* callee saved */ +#define fs0f $f21 +#define fs1 $f22 +#define fs1f $f23 +#define fs2 $f24 +#define fs2f $f25 +#define fs3 $f26 +#define fs3f $f27 +#define fs4 $f28 +#define fs4f $f29 +#define fs5 $f30 +#define fs5f $f31 + +#define fcr31 $31 /* FPU status register */ + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ + +#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 + +#define fv0 $f0 /* return value */ +#define fv1 $f2 +#define fa0 $f12 /* argument registers */ +#define fa1 $f13 +#define fa2 $f14 +#define fa3 $f15 +#define fa4 $f16 +#define fa5 $f17 +#define fa6 $f18 +#define fa7 $f19 +#define ft0 $f4 /* caller saved */ +#define ft1 $f5 +#define ft2 $f6 +#define ft3 $f7 +#define ft4 $f8 +#define ft5 $f9 +#define ft6 $f10 +#define ft7 $f11 +#define ft8 $f20 +#define ft9 $f21 +#define ft10 $f22 +#define ft11 $f23 +#define ft12 $f1 +#define ft13 $f3 +#define fs0 $f24 /* callee saved */ +#define fs1 $f25 +#define fs2 $f26 +#define fs3 $f27 +#define fs4 $f28 +#define fs5 $f29 +#define fs6 $f30 +#define fs7 $f31 + +#define fcr31 $31 + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */ + +#endif /* _ASM_FPREGDEF_H */ diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h new file mode 100644 index 000000000000..8a3ef247659a --- /dev/null +++ b/arch/mips/include/asm/fpu.h @@ -0,0 +1,153 @@ +/* + * Copyright (C) 2002 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_FPU_H +#define _ASM_FPU_H + +#include <linux/sched.h> +#include <linux/thread_info.h> +#include <linux/bitops.h> + +#include <asm/mipsregs.h> +#include <asm/cpu.h> +#include <asm/cpu-features.h> +#include <asm/hazards.h> +#include <asm/processor.h> +#include <asm/current.h> + +#ifdef CONFIG_MIPS_MT_FPAFF +#include <asm/mips_mt.h> +#endif + +struct sigcontext; +struct sigcontext32; + +extern asmlinkage int (*save_fp_context)(struct sigcontext __user *sc); +extern asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc); + +extern asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc); +extern asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc); + +extern void fpu_emulator_init_fpu(void); +extern int fpu_emulator_save_context(struct sigcontext __user *sc); +extern int fpu_emulator_restore_context(struct sigcontext __user *sc); +extern void _init_fpu(void); +extern void _save_fp(struct task_struct *); +extern void _restore_fp(struct task_struct *); + +#define __enable_fpu() \ +do { \ + set_c0_status(ST0_CU1); \ + enable_fpu_hazard(); \ +} while (0) + +#define __disable_fpu() \ +do { \ + clear_c0_status(ST0_CU1); \ + disable_fpu_hazard(); \ +} while (0) + +#define enable_fpu() \ +do { \ + if (cpu_has_fpu) \ + __enable_fpu(); \ +} while (0) + +#define disable_fpu() \ +do { \ + if (cpu_has_fpu) \ + __disable_fpu(); \ +} while (0) + + +#define clear_fpu_owner() clear_thread_flag(TIF_USEDFPU) + +static inline int __is_fpu_owner(void) +{ + return test_thread_flag(TIF_USEDFPU); +} + +static inline int is_fpu_owner(void) +{ + return cpu_has_fpu && __is_fpu_owner(); +} + +static inline void __own_fpu(void) +{ + __enable_fpu(); + KSTK_STATUS(current) |= ST0_CU1; + set_thread_flag(TIF_USEDFPU); +} + +static inline void own_fpu_inatomic(int restore) +{ + if (cpu_has_fpu && !__is_fpu_owner()) { + __own_fpu(); + if (restore) + _restore_fp(current); + } +} + +static inline void own_fpu(int restore) +{ + preempt_disable(); + own_fpu_inatomic(restore); + preempt_enable(); +} + +static inline void lose_fpu(int save) +{ + preempt_disable(); + if (is_fpu_owner()) { + if (save) + _save_fp(current); + KSTK_STATUS(current) &= ~ST0_CU1; + clear_thread_flag(TIF_USEDFPU); + __disable_fpu(); + } + preempt_enable(); +} + +static inline void init_fpu(void) +{ + preempt_disable(); + if (cpu_has_fpu) { + __own_fpu(); + _init_fpu(); + } else { + fpu_emulator_init_fpu(); + } + preempt_enable(); +} + +static inline void save_fp(struct task_struct *tsk) +{ + if (cpu_has_fpu) + _save_fp(tsk); +} + +static inline void restore_fp(struct task_struct *tsk) +{ + if (cpu_has_fpu) + _restore_fp(tsk); +} + +static inline fpureg_t *get_fpu_regs(struct task_struct *tsk) +{ + if (tsk == current) { + preempt_disable(); + if (is_fpu_owner()) + _save_fp(current); + preempt_enable(); + } + + return tsk->thread.fpu.fpr; +} + +#endif /* _ASM_FPU_H */ diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h new file mode 100644 index 000000000000..2731c38bd7ae --- /dev/null +++ b/arch/mips/include/asm/fpu_emulator.h @@ -0,0 +1,37 @@ +/* + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Further private data for which no space exists in mips_fpu_struct. + * This should be subsumed into the mips_fpu_struct structure as + * defined in processor.h as soon as the absurd wired absolute assembler + * offsets become dynamic at compile time. + * + * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + */ +#ifndef _ASM_FPU_EMULATOR_H +#define _ASM_FPU_EMULATOR_H + +struct mips_fpu_emulator_stats { + unsigned int emulated; + unsigned int loads; + unsigned int stores; + unsigned int cp1ops; + unsigned int cp1xops; + unsigned int errors; +}; + +extern struct mips_fpu_emulator_stats fpuemustats; + +#endif /* _ASM_FPU_EMULATOR_H */ diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h new file mode 100644 index 000000000000..b9cce90346cf --- /dev/null +++ b/arch/mips/include/asm/futex.h @@ -0,0 +1,203 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2006 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#ifdef __KERNEL__ + +#include <linux/futex.h> +#include <linux/uaccess.h> +#include <asm/barrier.h> +#include <asm/errno.h> +#include <asm/war.h> + +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +{ \ + if (cpu_has_llsc && R10000_LLSC_WAR) { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " .set mips3 \n" \ + "1: ll %1, %4 # __futex_atomic_op \n" \ + " .set mips0 \n" \ + " " insn " \n" \ + " .set mips3 \n" \ + "2: sc $1, %2 \n" \ + " beqzl $1, 1b \n" \ + __WEAK_LLSC_MB \ + "3: \n" \ + " .set pop \n" \ + " .set mips0 \n" \ + " .section .fixup,\"ax\" \n" \ + "4: li %0, %6 \n" \ + " j 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " "__UA_ADDR "\t1b, 4b \n" \ + " "__UA_ADDR "\t2b, 4b \n" \ + " .previous \n" \ + : "=r" (ret), "=&r" (oldval), "=R" (*uaddr) \ + : "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT) \ + : "memory"); \ + } else if (cpu_has_llsc) { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " .set mips3 \n" \ + "1: ll %1, %4 # __futex_atomic_op \n" \ + " .set mips0 \n" \ + " " insn " \n" \ + " .set mips3 \n" \ + "2: sc $1, %2 \n" \ + " beqz $1, 1b \n" \ + __WEAK_LLSC_MB \ + "3: \n" \ + " .set pop \n" \ + " .set mips0 \n" \ + " .section .fixup,\"ax\" \n" \ + "4: li %0, %6 \n" \ + " j 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " "__UA_ADDR "\t1b, 4b \n" \ + " "__UA_ADDR "\t2b, 4b \n" \ + " .previous \n" \ + : "=r" (ret), "=&r" (oldval), "=R" (*uaddr) \ + : "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT) \ + : "memory"); \ + } else \ + ret = -ENOSYS; \ +} + +static inline int +futex_atomic_op_inuser(int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + __futex_atomic_op("move $1, %z5", ret, oldval, uaddr, oparg); + break; + + case FUTEX_OP_ADD: + __futex_atomic_op("addu $1, %1, %z5", + ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_atomic_op("or $1, %1, %z5", + ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_atomic_op("and $1, %1, %z5", + ret, oldval, uaddr, ~oparg); + break; + case FUTEX_OP_XOR: + __futex_atomic_op("xor $1, %1, %z5", + ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + int retval; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + __asm__ __volatile__( + "# futex_atomic_cmpxchg_inatomic \n" + " .set push \n" + " .set noat \n" + " .set mips3 \n" + "1: ll %0, %2 \n" + " bne %0, %z3, 3f \n" + " .set mips0 \n" + " move $1, %z4 \n" + " .set mips3 \n" + "2: sc $1, %1 \n" + " beqzl $1, 1b \n" + __WEAK_LLSC_MB + "3: \n" + " .set pop \n" + " .section .fixup,\"ax\" \n" + "4: li %0, %5 \n" + " j 3b \n" + " .previous \n" + " .section __ex_table,\"a\" \n" + " "__UA_ADDR "\t1b, 4b \n" + " "__UA_ADDR "\t2b, 4b \n" + " .previous \n" + : "=&r" (retval), "=R" (*uaddr) + : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT) + : "memory"); + } else if (cpu_has_llsc) { + __asm__ __volatile__( + "# futex_atomic_cmpxchg_inatomic \n" + " .set push \n" + " .set noat \n" + " .set mips3 \n" + "1: ll %0, %2 \n" + " bne %0, %z3, 3f \n" + " .set mips0 \n" + " move $1, %z4 \n" + " .set mips3 \n" + "2: sc $1, %1 \n" + " beqz $1, 1b \n" + __WEAK_LLSC_MB + "3: \n" + " .set pop \n" + " .section .fixup,\"ax\" \n" + "4: li %0, %5 \n" + " j 3b \n" + " .previous \n" + " .section __ex_table,\"a\" \n" + " "__UA_ADDR "\t1b, 4b \n" + " "__UA_ADDR "\t2b, 4b \n" + " .previous \n" + : "=&r" (retval), "=R" (*uaddr) + : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT) + : "memory"); + } else + return -ENOSYS; + + return retval; +} + +#endif +#endif /* _ASM_FUTEX_H */ diff --git a/arch/mips/include/asm/fw/arc/hinv.h b/arch/mips/include/asm/fw/arc/hinv.h new file mode 100644 index 000000000000..e6ff4add04e2 --- /dev/null +++ b/arch/mips/include/asm/fw/arc/hinv.h @@ -0,0 +1,175 @@ +/* + * ARCS hardware/memory inventory/configuration and system ID definitions. + */ +#ifndef _ASM_ARC_HINV_H +#define _ASM_ARC_HINV_H + +#include <asm/sgidefs.h> +#include <asm/fw/arc/types.h> + +/* configuration query defines */ +typedef enum configclass { + SystemClass, + ProcessorClass, + CacheClass, +#ifndef _NT_PROM + MemoryClass, + AdapterClass, + ControllerClass, + PeripheralClass +#else /* _NT_PROM */ + AdapterClass, + ControllerClass, + PeripheralClass, + MemoryClass +#endif /* _NT_PROM */ +} CONFIGCLASS; + +typedef enum configtype { + ARC, + CPU, + FPU, + PrimaryICache, + PrimaryDCache, + SecondaryICache, + SecondaryDCache, + SecondaryCache, +#ifndef _NT_PROM + Memory, +#endif + EISAAdapter, + TCAdapter, + SCSIAdapter, + DTIAdapter, + MultiFunctionAdapter, + DiskController, + TapeController, + CDROMController, + WORMController, + SerialController, + NetworkController, + DisplayController, + ParallelController, + PointerController, + KeyboardController, + AudioController, + OtherController, + DiskPeripheral, + FloppyDiskPeripheral, + TapePeripheral, + ModemPeripheral, + MonitorPeripheral, + PrinterPeripheral, + PointerPeripheral, + KeyboardPeripheral, + TerminalPeripheral, + LinePeripheral, + NetworkPeripheral, +#ifdef _NT_PROM + Memory, +#endif + OtherPeripheral, + + /* new stuff for IP30 */ + /* added without moving anything */ + /* except ANONYMOUS. */ + + XTalkAdapter, + PCIAdapter, + GIOAdapter, + TPUAdapter, + + Anonymous +} CONFIGTYPE; + +typedef enum { + Failed = 1, + ReadOnly = 2, + Removable = 4, + ConsoleIn = 8, + ConsoleOut = 16, + Input = 32, + Output = 64 +} IDENTIFIERFLAG; + +#ifndef NULL /* for GetChild(NULL); */ +#define NULL 0 +#endif + +union key_u { + struct { +#ifdef _MIPSEB + unsigned char c_bsize; /* block size in lines */ + unsigned char c_lsize; /* line size in bytes/tag */ + unsigned short c_size; /* cache size in 4K pages */ +#else /* _MIPSEL */ + unsigned short c_size; /* cache size in 4K pages */ + unsigned char c_lsize; /* line size in bytes/tag */ + unsigned char c_bsize; /* block size in lines */ +#endif /* _MIPSEL */ + } cache; + ULONG FullKey; +}; + +#if _MIPS_SIM == _MIPS_SIM_ABI64 +#define SGI_ARCS_VERS 64 /* sgi 64-bit version */ +#define SGI_ARCS_REV 0 /* rev .00 */ +#else +#define SGI_ARCS_VERS 1 /* first version */ +#define SGI_ARCS_REV 10 /* rev .10, 3/04/92 */ +#endif + +typedef struct component { + CONFIGCLASS Class; + CONFIGTYPE Type; + IDENTIFIERFLAG Flags; + USHORT Version; + USHORT Revision; + ULONG Key; + ULONG AffinityMask; + ULONG ConfigurationDataSize; + ULONG IdentifierLength; + char *Identifier; +} COMPONENT; + +/* internal structure that holds pathname parsing data */ +struct cfgdata { + char *name; /* full name */ + int minlen; /* minimum length to match */ + CONFIGTYPE type; /* type of token */ +}; + +/* System ID */ +typedef struct systemid { + CHAR VendorId[8]; + CHAR ProductId[8]; +} SYSTEMID; + +/* memory query functions */ +typedef enum memorytype { + ExceptionBlock, + SPBPage, /* ARCS == SystemParameterBlock */ +#ifndef _NT_PROM + FreeContiguous, + FreeMemory, + BadMemory, + LoadedProgram, + FirmwareTemporary, + FirmwarePermanent +#else /* _NT_PROM */ + FreeMemory, + BadMemory, + LoadedProgram, + FirmwareTemporary, + FirmwarePermanent, + FreeContiguous +#endif /* _NT_PROM */ +} MEMORYTYPE; + +typedef struct memorydescriptor { + MEMORYTYPE Type; + LONG BasePage; + LONG PageCount; +} MEMORYDESCRIPTOR; + +#endif /* _ASM_ARC_HINV_H */ diff --git a/arch/mips/include/asm/fw/arc/types.h b/arch/mips/include/asm/fw/arc/types.h new file mode 100644 index 000000000000..b9adcd6f0860 --- /dev/null +++ b/arch/mips/include/asm/fw/arc/types.h @@ -0,0 +1,86 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright 1999 Ralf Baechle (ralf@gnu.org) + * Copyright 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_ARC_TYPES_H +#define _ASM_ARC_TYPES_H + + +#ifdef CONFIG_ARC32 + +typedef char CHAR; +typedef short SHORT; +typedef long LARGE_INTEGER __attribute__ ((__mode__ (__DI__))); +typedef long LONG __attribute__ ((__mode__ (__SI__))); +typedef unsigned char UCHAR; +typedef unsigned short USHORT; +typedef unsigned long ULONG __attribute__ ((__mode__ (__SI__))); +typedef void VOID; + +/* The pointer types. Note that we're using a 64-bit compiler but all + pointer in the ARC structures are only 32-bit, so we need some disgusting + workarounds. Keep your vomit bag handy. */ +typedef LONG _PCHAR; +typedef LONG _PSHORT; +typedef LONG _PLARGE_INTEGER; +typedef LONG _PLONG; +typedef LONG _PUCHAR; +typedef LONG _PUSHORT; +typedef LONG _PULONG; +typedef LONG _PVOID; + +#endif /* CONFIG_ARC32 */ + +#ifdef CONFIG_ARC64 + +typedef char CHAR; +typedef short SHORT; +typedef long LARGE_INTEGER __attribute__ ((__mode__ (__DI__))); +typedef long LONG __attribute__ ((__mode__ (__DI__))); +typedef unsigned char UCHAR; +typedef unsigned short USHORT; +typedef unsigned long ULONG __attribute__ ((__mode__ (__DI__))); +typedef void VOID; + +/* The pointer types. We're 64-bit and the firmware is also 64-bit, so + live is sane ... */ +typedef CHAR *_PCHAR; +typedef SHORT *_PSHORT; +typedef LARGE_INTEGER *_PLARGE_INTEGER; +typedef LONG *_PLONG; +typedef UCHAR *_PUCHAR; +typedef USHORT *_PUSHORT; +typedef ULONG *_PULONG; +typedef VOID *_PVOID; + +#endif /* CONFIG_ARC64 */ + +typedef CHAR *PCHAR; +typedef SHORT *PSHORT; +typedef LARGE_INTEGER *PLARGE_INTEGER; +typedef LONG *PLONG; +typedef UCHAR *PUCHAR; +typedef USHORT *PUSHORT; +typedef ULONG *PULONG; +typedef VOID *PVOID; + +/* + * Return type of ArcGetDisplayStatus() + */ +typedef struct { + USHORT CursorXPosition; + USHORT CursorYPosition; + USHORT CursorMaxXPosition; + USHORT CursorMaxYPosition; + USHORT ForegroundColor; + USHORT BackgroundColor; + UCHAR HighIntensity; + UCHAR Underscored; + UCHAR ReverseVideo; +} DISPLAY_STATUS; + +#endif /* _ASM_ARC_TYPES_H */ diff --git a/arch/mips/include/asm/fw/cfe/cfe_api.h b/arch/mips/include/asm/fw/cfe/cfe_api.h new file mode 100644 index 000000000000..0995575db320 --- /dev/null +++ b/arch/mips/include/asm/fw/cfe/cfe_api.h @@ -0,0 +1,122 @@ +/* + * Copyright (C) 2000, 2001, 2002 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/* + * Broadcom Common Firmware Environment (CFE) + * + * This file contains declarations for doing callbacks to + * cfe from an application. It should be the only header + * needed by the application to use this library + * + * Authors: Mitch Lichtenberg, Chris Demetriou + */ +#ifndef CFE_API_H +#define CFE_API_H + +#include <linux/types.h> +#include <linux/string.h> + +typedef long intptr_t; + + +/* + * Constants + */ + +/* Seal indicating CFE's presence, passed to user program. */ +#define CFE_EPTSEAL 0x43464531 + +#define CFE_MI_RESERVED 0 /* memory is reserved, do not use */ +#define CFE_MI_AVAILABLE 1 /* memory is available */ + +#define CFE_FLG_WARMSTART 0x00000001 +#define CFE_FLG_FULL_ARENA 0x00000001 +#define CFE_FLG_ENV_PERMANENT 0x00000001 + +#define CFE_CPU_CMD_START 1 +#define CFE_CPU_CMD_STOP 0 + +#define CFE_STDHANDLE_CONSOLE 0 + +#define CFE_DEV_NETWORK 1 +#define CFE_DEV_DISK 2 +#define CFE_DEV_FLASH 3 +#define CFE_DEV_SERIAL 4 +#define CFE_DEV_CPU 5 +#define CFE_DEV_NVRAM 6 +#define CFE_DEV_CLOCK 7 +#define CFE_DEV_OTHER 8 +#define CFE_DEV_MASK 0x0F + +#define CFE_CACHE_FLUSH_D 1 +#define CFE_CACHE_INVAL_I 2 +#define CFE_CACHE_INVAL_D 4 +#define CFE_CACHE_INVAL_L2 8 + +#define CFE_FWI_64BIT 0x00000001 +#define CFE_FWI_32BIT 0x00000002 +#define CFE_FWI_RELOC 0x00000004 +#define CFE_FWI_UNCACHED 0x00000008 +#define CFE_FWI_MULTICPU 0x00000010 +#define CFE_FWI_FUNCSIM 0x00000020 +#define CFE_FWI_RTLSIM 0x00000040 + +typedef struct { + int64_t fwi_version; /* major, minor, eco version */ + int64_t fwi_totalmem; /* total installed mem */ + int64_t fwi_flags; /* various flags */ + int64_t fwi_boardid; /* board ID */ + int64_t fwi_bootarea_va; /* VA of boot area */ + int64_t fwi_bootarea_pa; /* PA of boot area */ + int64_t fwi_bootarea_size; /* size of boot area */ +} cfe_fwinfo_t; + + +/* + * Defines and prototypes for functions which take no arguments. + */ +int64_t cfe_getticks(void); + +/* + * Defines and prototypes for the rest of the functions. + */ +int cfe_close(int handle); +int cfe_cpu_start(int cpu, void (*fn) (void), long sp, long gp, long a1); +int cfe_cpu_stop(int cpu); +int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen); +int cfe_enummem(int idx, int flags, uint64_t * start, uint64_t * length, + uint64_t * type); +int cfe_exit(int warm, int status); +int cfe_flushcache(int flg); +int cfe_getdevinfo(char *name); +int cfe_getenv(char *name, char *dest, int destlen); +int cfe_getfwinfo(cfe_fwinfo_t * info); +int cfe_getstdhandle(int flg); +int cfe_init(uint64_t handle, uint64_t ept); +int cfe_inpstat(int handle); +int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer, + int length, int *retlen, uint64_t offset); +int cfe_open(char *name); +int cfe_read(int handle, unsigned char *buffer, int length); +int cfe_readblk(int handle, int64_t offset, unsigned char *buffer, + int length); +int cfe_setenv(char *name, char *val); +int cfe_write(int handle, unsigned char *buffer, int length); +int cfe_writeblk(int handle, int64_t offset, unsigned char *buffer, + int length); + +#endif /* CFE_API_H */ diff --git a/arch/mips/include/asm/fw/cfe/cfe_error.h b/arch/mips/include/asm/fw/cfe/cfe_error.h new file mode 100644 index 000000000000..b80374636279 --- /dev/null +++ b/arch/mips/include/asm/fw/cfe/cfe_error.h @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2000, 2001, 2002 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + * Broadcom Common Firmware Environment (CFE) + * + * CFE's global error code list is here. + * + * Author: Mitch Lichtenberg + */ + +#define CFE_OK 0 +#define CFE_ERR -1 /* generic error */ +#define CFE_ERR_INV_COMMAND -2 +#define CFE_ERR_EOF -3 +#define CFE_ERR_IOERR -4 +#define CFE_ERR_NOMEM -5 +#define CFE_ERR_DEVNOTFOUND -6 +#define CFE_ERR_DEVOPEN -7 +#define CFE_ERR_INV_PARAM -8 +#define CFE_ERR_ENVNOTFOUND -9 +#define CFE_ERR_ENVREADONLY -10 + +#define CFE_ERR_NOTELF -11 +#define CFE_ERR_NOT32BIT -12 +#define CFE_ERR_WRONGENDIAN -13 +#define CFE_ERR_BADELFVERS -14 +#define CFE_ERR_NOTMIPS -15 +#define CFE_ERR_BADELFFMT -16 +#define CFE_ERR_BADADDR -17 + +#define CFE_ERR_FILENOTFOUND -18 +#define CFE_ERR_UNSUPPORTED -19 + +#define CFE_ERR_HOSTUNKNOWN -20 + +#define CFE_ERR_TIMEOUT -21 + +#define CFE_ERR_PROTOCOLERR -22 + +#define CFE_ERR_NETDOWN -23 +#define CFE_ERR_NONAMESERVER -24 + +#define CFE_ERR_NOHANDLES -25 +#define CFE_ERR_ALREADYBOUND -26 + +#define CFE_ERR_CANNOTSET -27 +#define CFE_ERR_NOMORE -28 +#define CFE_ERR_BADFILESYS -29 +#define CFE_ERR_FSNOTAVAIL -30 + +#define CFE_ERR_INVBOOTBLOCK -31 +#define CFE_ERR_WRONGDEVTYPE -32 +#define CFE_ERR_BBCHECKSUM -33 +#define CFE_ERR_BOOTPROGCHKSUM -34 + +#define CFE_ERR_LDRNOTAVAIL -35 + +#define CFE_ERR_NOTREADY -36 + +#define CFE_ERR_GETMEM -37 +#define CFE_ERR_SETMEM -38 + +#define CFE_ERR_NOTCONN -39 +#define CFE_ERR_ADDRINUSE -40 diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h new file mode 100644 index 000000000000..d74a8a4ca861 --- /dev/null +++ b/arch/mips/include/asm/gcmpregs.h @@ -0,0 +1,117 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000, 07 MIPS Technologies, Inc. + * + * Multiprocessor Subsystem Register Definitions + * + */ +#ifndef _ASM_GCMPREGS_H +#define _ASM_GCMPREGS_H + + +/* Offsets to major blocks within GCMP from GCMP base */ +#define GCMP_GCB_OFS 0x0000 /* Global Control Block */ +#define GCMP_CLCB_OFS 0x2000 /* Core Local Control Block */ +#define GCMP_COCB_OFS 0x4000 /* Core Other Control Block */ +#define GCMP_GDB_OFS 0x8000 /* Global Debug Block */ + +/* Offsets to individual GCMP registers from GCMP base */ +#define GCMPOFS(block, tag, reg) (GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS) + +#define GCMPGCBOFS(reg) GCMPOFS(GCB, GCB, reg) +#define GCMPCLCBOFS(reg) GCMPOFS(CLCB, CCB, reg) +#define GCMPCOCBOFS(reg) GCMPOFS(COCB, CCB, reg) +#define GCMPGDBOFS(reg) GCMPOFS(GDB, GDB, reg) + +/* GCMP register access */ +#define GCMPGCB(reg) REGP(_gcmp_base, GCMPGCBOFS(reg)) +#define GCMPCLCB(reg) REGP(_gcmp_base, GCMPCLCBOFS(reg)) +#define GCMPCOCB(reg) REGP(_gcmp_base, GCMPCOCBOFS(reg)) +#define GCMPGDB(reg) REGP(_gcmp_base, GCMPGDBOFS(reg)) + +/* Mask generation */ +#define GCMPMSK(block, reg, bits) (MSK(bits)<<GCMP_##block##_##reg##_SHF) +#define GCMPGCBMSK(reg, bits) GCMPMSK(GCB, reg, bits) +#define GCMPCCBMSK(reg, bits) GCMPMSK(CCB, reg, bits) +#define GCMPGDBMSK(reg, bits) GCMPMSK(GDB, reg, bits) + +/* GCB registers */ +#define GCMP_GCB_GC_OFS 0x0000 /* Global Config Register */ +#define GCMP_GCB_GC_NUMIOCU_SHF 8 +#define GCMP_GCB_GC_NUMIOCU_MSK GCMPGCBMSK(GC_NUMIOCU, 4) +#define GCMP_GCB_GC_NUMCORES_SHF 0 +#define GCMP_GCB_GC_NUMCORES_MSK GCMPGCBMSK(GC_NUMCORES, 8) +#define GCMP_GCB_GCMPB_OFS 0x0008 /* Global GCMP Base */ +#define GCMP_GCB_GCMPB_GCMPBASE_SHF 15 +#define GCMP_GCB_GCMPB_GCMPBASE_MSK GCMPGCBMSK(GCMPB_GCMPBASE, 17) +#define GCMP_GCB_GCMPB_CMDEFTGT_SHF 0 +#define GCMP_GCB_GCMPB_CMDEFTGT_MSK GCMPGCBMSK(GCMPB_CMDEFTGT, 2) +#define GCMP_GCB_GCMPB_CMDEFTGT_MEM 0 +#define GCMP_GCB_GCMPB_CMDEFTGT_MEM1 1 +#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU1 2 +#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU2 3 +#define GCMP_GCB_CCMC_OFS 0x0010 /* Global CM Control */ +#define GCMP_GCB_GCSRAP_OFS 0x0020 /* Global CSR Access Privilege */ +#define GCMP_GCB_GCSRAP_CMACCESS_SHF 0 +#define GCMP_GCB_GCSRAP_CMACCESS_MSK GCMPGCBMSK(GCSRAP_CMACCESS, 8) +#define GCMP_GCB_GCMPREV_OFS 0x0030 /* GCMP Revision Register */ +#define GCMP_GCB_GCMEM_OFS 0x0040 /* Global CM Error Mask */ +#define GCMP_GCB_GCMEC_OFS 0x0048 /* Global CM Error Cause */ +#define GCMP_GCB_GMEC_ERROR_TYPE_SHF 27 +#define GCMP_GCB_GMEC_ERROR_TYPE_MSK GCMPGCBMSK(GMEC_ERROR_TYPE, 5) +#define GCMP_GCB_GMEC_ERROR_INFO_SHF 0 +#define GCMP_GCB_GMEC_ERROR_INFO_MSK GCMPGCBMSK(GMEC_ERROR_INFO, 27) +#define GCMP_GCB_GCMEA_OFS 0x0050 /* Global CM Error Address */ +#define GCMP_GCB_GCMEO_OFS 0x0058 /* Global CM Error Multiple */ +#define GCMP_GCB_GMEO_ERROR_2ND_SHF 0 +#define GCMP_GCB_GMEO_ERROR_2ND_MSK GCMPGCBMSK(GMEO_ERROR_2ND, 5) +#define GCMP_GCB_GICBA_OFS 0x0080 /* Global Interrupt Controller Base Address */ +#define GCMP_GCB_GICBA_BASE_SHF 17 +#define GCMP_GCB_GICBA_BASE_MSK GCMPGCBMSK(GICBA_BASE, 15) +#define GCMP_GCB_GICBA_EN_SHF 0 +#define GCMP_GCB_GICBA_EN_MSK GCMPGCBMSK(GICBA_EN, 1) + +/* GCB Regions */ +#define GCMP_GCB_CMxBASE_OFS(n) (0x0090+16*(n)) /* Global Region[0-3] Base Address */ +#define GCMP_GCB_CMxBASE_BASE_SHF 16 +#define GCMP_GCB_CMxBASE_BASE_MSK GCMPGCBMSK(CMxBASE_BASE, 16) +#define GCMP_GCB_CMxMASK_OFS(n) (0x0098+16*(n)) /* Global Region[0-3] Address Mask */ +#define GCMP_GCB_CMxMASK_MASK_SHF 16 +#define GCMP_GCB_CMxMASK_MASK_MSK GCMPGCBMSK(CMxMASK_MASK, 16) +#define GCMP_GCB_CMxMASK_CMREGTGT_SHF 0 +#define GCMP_GCB_CMxMASK_CMREGTGT_MSK GCMPGCBMSK(CMxMASK_CMREGTGT, 2) +#define GCMP_GCB_CMxMASK_CMREGTGT_MEM 0 +#define GCMP_GCB_CMxMASK_CMREGTGT_MEM1 1 +#define GCMP_GCB_CMxMASK_CMREGTGT_IOCU1 2 +#define GCMP_GCB_CMxMASK_CMREGTGT_IOCU2 3 + + +/* Core local/Core other control block registers */ +#define GCMP_CCB_RESETR_OFS 0x0000 /* Reset Release */ +#define GCMP_CCB_RESETR_INRESET_SHF 0 +#define GCMP_CCB_RESETR_INRESET_MSK GCMPCCBMSK(RESETR_INRESET, 16) +#define GCMP_CCB_COHCTL_OFS 0x0008 /* Coherence Control */ +#define GCMP_CCB_COHCTL_DOMAIN_SHF 0 +#define GCMP_CCB_COHCTL_DOMAIN_MSK GCMPCCBMSK(COHCTL_DOMAIN, 8) +#define GCMP_CCB_CFG_OFS 0x0010 /* Config */ +#define GCMP_CCB_CFG_IOCUTYPE_SHF 10 +#define GCMP_CCB_CFG_IOCUTYPE_MSK GCMPCCBMSK(CFG_IOCUTYPE, 2) +#define GCMP_CCB_CFG_IOCUTYPE_CPU 0 +#define GCMP_CCB_CFG_IOCUTYPE_NCIOCU 1 +#define GCMP_CCB_CFG_IOCUTYPE_CIOCU 2 +#define GCMP_CCB_CFG_NUMVPE_SHF 0 +#define GCMP_CCB_CFG_NUMVPE_MSK GCMPCCBMSK(CFG_NUMVPE, 10) +#define GCMP_CCB_OTHER_OFS 0x0018 /* Other Address */ +#define GCMP_CCB_OTHER_CORENUM_SHF 16 +#define GCMP_CCB_OTHER_CORENUM_MSK GCMPCCBMSK(OTHER_CORENUM, 16) +#define GCMP_CCB_RESETBASE_OFS 0x0020 /* Reset Exception Base */ +#define GCMP_CCB_RESETBASE_BEV_SHF 12 +#define GCMP_CCB_RESETBASE_BEV_MSK GCMPCCBMSK(RESETBASE_BEV, 20) +#define GCMP_CCB_ID_OFS 0x0028 /* Identification */ +#define GCMP_CCB_DINTGROUP_OFS 0x0030 /* DINT Group Participate */ +#define GCMP_CCB_DBGGROUP_OFS 0x0100 /* DebugBreak Group */ + +#endif /* _ASM_GCMPREGS_H */ diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h new file mode 100644 index 000000000000..954807d9d66a --- /dev/null +++ b/arch/mips/include/asm/gic.h @@ -0,0 +1,487 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000, 07 MIPS Technologies, Inc. + * + * GIC Register Definitions + * + */ +#ifndef _ASM_GICREGS_H +#define _ASM_GICREGS_H + +#undef GICISBYTELITTLEENDIAN +#define GICISWORDLITTLEENDIAN + +/* Constants */ +#define GIC_POL_POS 1 +#define GIC_POL_NEG 0 +#define GIC_TRIG_EDGE 1 +#define GIC_TRIG_LEVEL 0 + +#define GIC_NUM_INTRS 32 + +#define MSK(n) ((1 << (n)) - 1) +#define REG32(addr) (*(volatile unsigned int *) (addr)) +#define REG(base, offs) REG32((unsigned long)(base) + offs##_##OFS) +#define REGP(base, phys) REG32((unsigned long)(base) + (phys)) + +/* Accessors */ +#define GIC_REG(segment, offset) \ + REG32(_gic_base + segment##_##SECTION_OFS + offset##_##OFS) +#define GIC_REG_ADDR(segment, offset) \ + REG32(_gic_base + segment##_##SECTION_OFS + offset) + +#define GIC_ABS_REG(segment, offset) \ + (_gic_base + segment##_##SECTION_OFS + offset##_##OFS) +#define GIC_REG_ABS_ADDR(segment, offset) \ + (_gic_base + segment##_##SECTION_OFS + offset) + +#ifdef GICISBYTELITTLEENDIAN +#define GICREAD(reg, data) (data) = (reg), (data) = le32_to_cpu(data) +#define GICWRITE(reg, data) (reg) = cpu_to_le32(data) +#define GICBIS(reg, bits) \ + ({unsigned int data; \ + GICREAD(reg, data); \ + data |= bits; \ + GICWRITE(reg, data); \ + }) + +#else +#define GICREAD(reg, data) (data) = (reg) +#define GICWRITE(reg, data) (reg) = (data) +#define GICBIS(reg, bits) (reg) |= (bits) +#endif + + +/* GIC Address Space */ +#define SHARED_SECTION_OFS 0x0000 +#define SHARED_SECTION_SIZE 0x8000 +#define VPE_LOCAL_SECTION_OFS 0x8000 +#define VPE_LOCAL_SECTION_SIZE 0x4000 +#define VPE_OTHER_SECTION_OFS 0xc000 +#define VPE_OTHER_SECTION_SIZE 0x4000 +#define USM_VISIBLE_SECTION_OFS 0x10000 +#define USM_VISIBLE_SECTION_SIZE 0x10000 + +/* Register Map for Shared Section */ +#if defined(CONFIG_CPU_LITTLE_ENDIAN) || defined(GICISWORDLITTLEENDIAN) + +#define GIC_SH_CONFIG_OFS 0x0000 + +/* Shared Global Counter */ +#define GIC_SH_COUNTER_31_00_OFS 0x0010 +#define GIC_SH_COUNTER_63_32_OFS 0x0014 + +/* Interrupt Polarity */ +#define GIC_SH_POL_31_0_OFS 0x0100 +#define GIC_SH_POL_63_32_OFS 0x0104 +#define GIC_SH_POL_95_64_OFS 0x0108 +#define GIC_SH_POL_127_96_OFS 0x010c +#define GIC_SH_POL_159_128_OFS 0x0110 +#define GIC_SH_POL_191_160_OFS 0x0114 +#define GIC_SH_POL_223_192_OFS 0x0118 +#define GIC_SH_POL_255_224_OFS 0x011c + +/* Edge/Level Triggering */ +#define GIC_SH_TRIG_31_0_OFS 0x0180 +#define GIC_SH_TRIG_63_32_OFS 0x0184 +#define GIC_SH_TRIG_95_64_OFS 0x0188 +#define GIC_SH_TRIG_127_96_OFS 0x018c +#define GIC_SH_TRIG_159_128_OFS 0x0190 +#define GIC_SH_TRIG_191_160_OFS 0x0194 +#define GIC_SH_TRIG_223_192_OFS 0x0198 +#define GIC_SH_TRIG_255_224_OFS 0x019c + +/* Dual Edge Triggering */ +#define GIC_SH_DUAL_31_0_OFS 0x0200 +#define GIC_SH_DUAL_63_32_OFS 0x0204 +#define GIC_SH_DUAL_95_64_OFS 0x0208 +#define GIC_SH_DUAL_127_96_OFS 0x020c +#define GIC_SH_DUAL_159_128_OFS 0x0210 +#define GIC_SH_DUAL_191_160_OFS 0x0214 +#define GIC_SH_DUAL_223_192_OFS 0x0218 +#define GIC_SH_DUAL_255_224_OFS 0x021c + +/* Set/Clear corresponding bit in Edge Detect Register */ +#define GIC_SH_WEDGE_OFS 0x0280 + +/* Reset Mask - Disables Interrupt */ +#define GIC_SH_RMASK_31_0_OFS 0x0300 +#define GIC_SH_RMASK_63_32_OFS 0x0304 +#define GIC_SH_RMASK_95_64_OFS 0x0308 +#define GIC_SH_RMASK_127_96_OFS 0x030c +#define GIC_SH_RMASK_159_128_OFS 0x0310 +#define GIC_SH_RMASK_191_160_OFS 0x0314 +#define GIC_SH_RMASK_223_192_OFS 0x0318 +#define GIC_SH_RMASK_255_224_OFS 0x031c + +/* Set Mask (WO) - Enables Interrupt */ +#define GIC_SH_SMASK_31_0_OFS 0x0380 +#define GIC_SH_SMASK_63_32_OFS 0x0384 +#define GIC_SH_SMASK_95_64_OFS 0x0388 +#define GIC_SH_SMASK_127_96_OFS 0x038c +#define GIC_SH_SMASK_159_128_OFS 0x0390 +#define GIC_SH_SMASK_191_160_OFS 0x0394 +#define GIC_SH_SMASK_223_192_OFS 0x0398 +#define GIC_SH_SMASK_255_224_OFS 0x039c + +/* Global Interrupt Mask Register (RO) - Bit Set == Interrupt enabled */ +#define GIC_SH_MASK_31_0_OFS 0x0400 +#define GIC_SH_MASK_63_32_OFS 0x0404 +#define GIC_SH_MASK_95_64_OFS 0x0408 +#define GIC_SH_MASK_127_96_OFS 0x040c +#define GIC_SH_MASK_159_128_OFS 0x0410 +#define GIC_SH_MASK_191_160_OFS 0x0414 +#define GIC_SH_MASK_223_192_OFS 0x0418 +#define GIC_SH_MASK_255_224_OFS 0x041c + +/* Pending Global Interrupts (RO) */ +#define GIC_SH_PEND_31_0_OFS 0x0480 +#define GIC_SH_PEND_63_32_OFS 0x0484 +#define GIC_SH_PEND_95_64_OFS 0x0488 +#define GIC_SH_PEND_127_96_OFS 0x048c +#define GIC_SH_PEND_159_128_OFS 0x0490 +#define GIC_SH_PEND_191_160_OFS 0x0494 +#define GIC_SH_PEND_223_192_OFS 0x0498 +#define GIC_SH_PEND_255_224_OFS 0x049c + +#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS 0x0500 + +/* Maps Interrupt X to a Pin */ +#define GIC_SH_MAP_TO_PIN(intr) \ + (GIC_SH_INTR_MAP_TO_PIN_BASE_OFS + (4 * intr)) + +#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS 0x2000 + +/* Maps Interrupt X to a VPE */ +#define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \ + (GIC_SH_INTR_MAP_TO_VPE_BASE_OFS + (32 * (intr)) + (((vpe) / 32) * 4)) +#define GIC_SH_MAP_TO_VPE_REG_BIT(vpe) (1 << ((vpe) % 32)) + +/* Polarity : Reset Value is always 0 */ +#define GIC_SH_SET_POLARITY_OFS 0x0100 +#define GIC_SET_POLARITY(intr, pol) \ + GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + (((intr) / 32) * 4)), (pol) << ((intr) % 32)) + +/* Triggering : Reset Value is always 0 */ +#define GIC_SH_SET_TRIGGER_OFS 0x0180 +#define GIC_SET_TRIGGER(intr, trig) \ + GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + (((intr) / 32) * 4)), (trig) << ((intr) % 32)) + +/* Mask manipulation */ +#define GIC_SH_SMASK_OFS 0x0380 +#define GIC_SET_INTR_MASK(intr, val) \ + GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + (((intr) / 32) * 4)), ((val) << ((intr) % 32))) + +#define GIC_SH_RMASK_OFS 0x0300 +#define GIC_CLR_INTR_MASK(intr, val) \ + GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + (((intr) / 32) * 4)), ((val) << ((intr) % 32))) + +/* Register Map for Local Section */ +#define GIC_VPE_CTL_OFS 0x0000 +#define GIC_VPE_PEND_OFS 0x0004 +#define GIC_VPE_MASK_OFS 0x0008 +#define GIC_VPE_RMASK_OFS 0x000c +#define GIC_VPE_SMASK_OFS 0x0010 +#define GIC_VPE_WD_MAP_OFS 0x0040 +#define GIC_VPE_COMPARE_MAP_OFS 0x0044 +#define GIC_VPE_TIMER_MAP_OFS 0x0048 +#define GIC_VPE_PERFCTR_MAP_OFS 0x0050 +#define GIC_VPE_SWINT0_MAP_OFS 0x0054 +#define GIC_VPE_SWINT1_MAP_OFS 0x0058 +#define GIC_VPE_OTHER_ADDR_OFS 0x0080 +#define GIC_VPE_WD_CONFIG0_OFS 0x0090 +#define GIC_VPE_WD_COUNT0_OFS 0x0094 +#define GIC_VPE_WD_INITIAL0_OFS 0x0098 +#define GIC_VPE_COMPARE_LO_OFS 0x00a0 +#define GIC_VPE_COMPARE_HI 0x00a4 + +#define GIC_VPE_EIC_SHADOW_SET_BASE 0x0100 +#define GIC_VPE_EIC_SS(intr) \ + (GIC_EIC_SHADOW_SET_BASE + (4 * intr)) + +#define GIC_VPE_EIC_VEC_BASE 0x0800 +#define GIC_VPE_EIC_VEC(intr) \ + (GIC_VPE_EIC_VEC_BASE + (4 * intr)) + +#define GIC_VPE_TENABLE_NMI_OFS 0x1000 +#define GIC_VPE_TENABLE_YQ_OFS 0x1004 +#define GIC_VPE_TENABLE_INT_31_0_OFS 0x1080 +#define GIC_VPE_TENABLE_INT_63_32_OFS 0x1084 + +/* User Mode Visible Section Register Map */ +#define GIC_UMV_SH_COUNTER_31_00_OFS 0x0000 +#define GIC_UMV_SH_COUNTER_63_32_OFS 0x0004 + +#else /* CONFIG_CPU_BIG_ENDIAN */ + +#define GIC_SH_CONFIG_OFS 0x0000 + +/* Shared Global Counter */ +#define GIC_SH_COUNTER_31_00_OFS 0x0014 +#define GIC_SH_COUNTER_63_32_OFS 0x0010 + +/* Interrupt Polarity */ +#define GIC_SH_POL_31_0_OFS 0x0104 +#define GIC_SH_POL_63_32_OFS 0x0100 +#define GIC_SH_POL_95_64_OFS 0x010c +#define GIC_SH_POL_127_96_OFS 0x0108 +#define GIC_SH_POL_159_128_OFS 0x0114 +#define GIC_SH_POL_191_160_OFS 0x0110 +#define GIC_SH_POL_223_192_OFS 0x011c +#define GIC_SH_POL_255_224_OFS 0x0118 + +/* Edge/Level Triggering */ +#define GIC_SH_TRIG_31_0_OFS 0x0184 +#define GIC_SH_TRIG_63_32_OFS 0x0180 +#define GIC_SH_TRIG_95_64_OFS 0x018c +#define GIC_SH_TRIG_127_96_OFS 0x0188 +#define GIC_SH_TRIG_159_128_OFS 0x0194 +#define GIC_SH_TRIG_191_160_OFS 0x0190 +#define GIC_SH_TRIG_223_192_OFS 0x019c +#define GIC_SH_TRIG_255_224_OFS 0x0198 + +/* Dual Edge Triggering */ +#define GIC_SH_DUAL_31_0_OFS 0x0204 +#define GIC_SH_DUAL_63_32_OFS 0x0200 +#define GIC_SH_DUAL_95_64_OFS 0x020c +#define GIC_SH_DUAL_127_96_OFS 0x0208 +#define GIC_SH_DUAL_159_128_OFS 0x0214 +#define GIC_SH_DUAL_191_160_OFS 0x0210 +#define GIC_SH_DUAL_223_192_OFS 0x021c +#define GIC_SH_DUAL_255_224_OFS 0x0218 + +/* Set/Clear corresponding bit in Edge Detect Register */ +#define GIC_SH_WEDGE_OFS 0x0280 + +/* Reset Mask - Disables Interrupt */ +#define GIC_SH_RMASK_31_0_OFS 0x0304 +#define GIC_SH_RMASK_63_32_OFS 0x0300 +#define GIC_SH_RMASK_95_64_OFS 0x030c +#define GIC_SH_RMASK_127_96_OFS 0x0308 +#define GIC_SH_RMASK_159_128_OFS 0x0314 +#define GIC_SH_RMASK_191_160_OFS 0x0310 +#define GIC_SH_RMASK_223_192_OFS 0x031c +#define GIC_SH_RMASK_255_224_OFS 0x0318 + +/* Set Mask (WO) - Enables Interrupt */ +#define GIC_SH_SMASK_31_0_OFS 0x0384 +#define GIC_SH_SMASK_63_32_OFS 0x0380 +#define GIC_SH_SMASK_95_64_OFS 0x038c +#define GIC_SH_SMASK_127_96_OFS 0x0388 +#define GIC_SH_SMASK_159_128_OFS 0x0394 +#define GIC_SH_SMASK_191_160_OFS 0x0390 +#define GIC_SH_SMASK_223_192_OFS 0x039c +#define GIC_SH_SMASK_255_224_OFS 0x0398 + +/* Global Interrupt Mask Register (RO) - Bit Set == Interrupt enabled */ +#define GIC_SH_MASK_31_0_OFS 0x0404 +#define GIC_SH_MASK_63_32_OFS 0x0400 +#define GIC_SH_MASK_95_64_OFS 0x040c +#define GIC_SH_MASK_127_96_OFS 0x0408 +#define GIC_SH_MASK_159_128_OFS 0x0414 +#define GIC_SH_MASK_191_160_OFS 0x0410 +#define GIC_SH_MASK_223_192_OFS 0x041c +#define GIC_SH_MASK_255_224_OFS 0x0418 + +/* Pending Global Interrupts (RO) */ +#define GIC_SH_PEND_31_0_OFS 0x0484 +#define GIC_SH_PEND_63_32_OFS 0x0480 +#define GIC_SH_PEND_95_64_OFS 0x048c +#define GIC_SH_PEND_127_96_OFS 0x0488 +#define GIC_SH_PEND_159_128_OFS 0x0494 +#define GIC_SH_PEND_191_160_OFS 0x0490 +#define GIC_SH_PEND_223_192_OFS 0x049c +#define GIC_SH_PEND_255_224_OFS 0x0498 + +#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS 0x0500 + +/* Maps Interrupt X to a Pin */ +#define GIC_SH_MAP_TO_PIN(intr) \ + (GIC_SH_INTR_MAP_TO_PIN_BASE_OFS + (4 * intr)) + +#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS 0x2004 + +/* + * Maps Interrupt X to a VPE. This is more complex than the LE case, as + * odd and even registers need to be transposed. It does work - trust me! + */ +#define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \ + (GIC_SH_INTR_MAP_TO_VPE_BASE_OFS + (32 * (intr)) + \ + (((((vpe) / 32) ^ 1) - 1) * 4)) +#define GIC_SH_MAP_TO_VPE_REG_BIT(vpe) (1 << ((vpe) % 32)) + +/* Polarity */ +#define GIC_SH_SET_POLARITY_OFS 0x0100 +#define GIC_SET_POLARITY(intr, pol) \ + GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), (pol) << ((intr) % 32)) + +/* Triggering */ +#define GIC_SH_SET_TRIGGER_OFS 0x0180 +#define GIC_SET_TRIGGER(intr, trig) \ + GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), (trig) << ((intr) % 32)) + +/* Mask manipulation */ +#define GIC_SH_SMASK_OFS 0x0380 +#define GIC_SET_INTR_MASK(intr, val) \ + GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32))) + +#define GIC_SH_RMASK_OFS 0x0300 +#define GIC_CLR_INTR_MASK(intr, val) \ + GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32))) + +/* Register Map for Local Section */ +#define GIC_VPE_CTL_OFS 0x0000 +#define GIC_VPE_PEND_OFS 0x0004 +#define GIC_VPE_MASK_OFS 0x0008 +#define GIC_VPE_RMASK_OFS 0x000c +#define GIC_VPE_SMASK_OFS 0x0010 +#define GIC_VPE_WD_MAP_OFS 0x0040 +#define GIC_VPE_COMPARE_MAP_OFS 0x0044 +#define GIC_VPE_TIMER_MAP_OFS 0x0048 +#define GIC_VPE_PERFCTR_MAP_OFS 0x0050 +#define GIC_VPE_SWINT0_MAP_OFS 0x0054 +#define GIC_VPE_SWINT1_MAP_OFS 0x0058 +#define GIC_VPE_OTHER_ADDR_OFS 0x0080 +#define GIC_VPE_WD_CONFIG0_OFS 0x0090 +#define GIC_VPE_WD_COUNT0_OFS 0x0094 +#define GIC_VPE_WD_INITIAL0_OFS 0x0098 +#define GIC_VPE_COMPARE_LO_OFS 0x00a4 +#define GIC_VPE_COMPARE_HI_OFS 0x00a0 + +#define GIC_VPE_EIC_SHADOW_SET_BASE 0x0100 +#define GIC_VPE_EIC_SS(intr) \ + (GIC_EIC_SHADOW_SET_BASE + (4 * intr)) + +#define GIC_VPE_EIC_VEC_BASE 0x0800 +#define GIC_VPE_EIC_VEC(intr) \ + (GIC_VPE_EIC_VEC_BASE + (4 * intr)) + +#define GIC_VPE_TENABLE_NMI_OFS 0x1000 +#define GIC_VPE_TENABLE_YQ_OFS 0x1004 +#define GIC_VPE_TENABLE_INT_31_0_OFS 0x1080 +#define GIC_VPE_TENABLE_INT_63_32_OFS 0x1084 + +/* User Mode Visible Section Register Map */ +#define GIC_UMV_SH_COUNTER_31_00_OFS 0x0004 +#define GIC_UMV_SH_COUNTER_63_32_OFS 0x0000 + +#endif /* !LE */ + +/* Masks */ +#define GIC_SH_CONFIG_COUNTSTOP_SHF 28 +#define GIC_SH_CONFIG_COUNTSTOP_MSK (MSK(1) << GIC_SH_CONFIG_COUNTSTOP_SHF) + +#define GIC_SH_CONFIG_COUNTBITS_SHF 24 +#define GIC_SH_CONFIG_COUNTBITS_MSK (MSK(4) << GIC_SH_CONFIG_COUNTBITS_SHF) + +#define GIC_SH_CONFIG_NUMINTRS_SHF 16 +#define GIC_SH_CONFIG_NUMINTRS_MSK (MSK(8) << GIC_SH_CONFIG_NUMINTRS_SHF) + +#define GIC_SH_CONFIG_NUMVPES_SHF 0 +#define GIC_SH_CONFIG_NUMVPES_MSK (MSK(8) << GIC_SH_CONFIG_NUMVPES_SHF) + +#define GIC_SH_WEDGE_SET(intr) (intr | (0x1 << 31)) +#define GIC_SH_WEDGE_CLR(intr) (intr & ~(0x1 << 31)) + +#define GIC_MAP_TO_PIN_SHF 31 +#define GIC_MAP_TO_PIN_MSK (MSK(1) << GIC_MAP_TO_PIN_SHF) +#define GIC_MAP_TO_NMI_SHF 30 +#define GIC_MAP_TO_NMI_MSK (MSK(1) << GIC_MAP_TO_NMI_SHF) +#define GIC_MAP_TO_YQ_SHF 29 +#define GIC_MAP_TO_YQ_MSK (MSK(1) << GIC_MAP_TO_YQ_SHF) +#define GIC_MAP_SHF 0 +#define GIC_MAP_MSK (MSK(6) << GIC_MAP_SHF) + +/* GIC_VPE_CTL Masks */ +#define GIC_VPE_CTL_PERFCNT_RTBL_SHF 2 +#define GIC_VPE_CTL_PERFCNT_RTBL_MSK (MSK(1) << GIC_VPE_CTL_PERFCNT_RTBL_SHF) +#define GIC_VPE_CTL_TIMER_RTBL_SHF 1 +#define GIC_VPE_CTL_TIMER_RTBL_MSK (MSK(1) << GIC_VPE_CTL_TIMER_RTBL_SHF) +#define GIC_VPE_CTL_EIC_MODE_SHF 0 +#define GIC_VPE_CTL_EIC_MODE_MSK (MSK(1) << GIC_VPE_CTL_EIC_MODE_SHF) + +/* GIC_VPE_PEND Masks */ +#define GIC_VPE_PEND_WD_SHF 0 +#define GIC_VPE_PEND_WD_MSK (MSK(1) << GIC_VPE_PEND_WD_SHF) +#define GIC_VPE_PEND_CMP_SHF 1 +#define GIC_VPE_PEND_CMP_MSK (MSK(1) << GIC_VPE_PEND_CMP_SHF) +#define GIC_VPE_PEND_TIMER_SHF 2 +#define GIC_VPE_PEND_TIMER_MSK (MSK(1) << GIC_VPE_PEND_TIMER_SHF) +#define GIC_VPE_PEND_PERFCOUNT_SHF 3 +#define GIC_VPE_PEND_PERFCOUNT_MSK (MSK(1) << GIC_VPE_PEND_PERFCOUNT_SHF) +#define GIC_VPE_PEND_SWINT0_SHF 4 +#define GIC_VPE_PEND_SWINT0_MSK (MSK(1) << GIC_VPE_PEND_SWINT0_SHF) +#define GIC_VPE_PEND_SWINT1_SHF 5 +#define GIC_VPE_PEND_SWINT1_MSK (MSK(1) << GIC_VPE_PEND_SWINT1_SHF) + +/* GIC_VPE_RMASK Masks */ +#define GIC_VPE_RMASK_WD_SHF 0 +#define GIC_VPE_RMASK_WD_MSK (MSK(1) << GIC_VPE_RMASK_WD_SHF) +#define GIC_VPE_RMASK_CMP_SHF 1 +#define GIC_VPE_RMASK_CMP_MSK (MSK(1) << GIC_VPE_RMASK_CMP_SHF) +#define GIC_VPE_RMASK_TIMER_SHF 2 +#define GIC_VPE_RMASK_TIMER_MSK (MSK(1) << GIC_VPE_RMASK_TIMER_SHF) +#define GIC_VPE_RMASK_PERFCNT_SHF 3 +#define GIC_VPE_RMASK_PERFCNT_MSK (MSK(1) << GIC_VPE_RMASK_PERFCNT_SHF) +#define GIC_VPE_RMASK_SWINT0_SHF 4 +#define GIC_VPE_RMASK_SWINT0_MSK (MSK(1) << GIC_VPE_RMASK_SWINT0_SHF) +#define GIC_VPE_RMASK_SWINT1_SHF 5 +#define GIC_VPE_RMASK_SWINT1_MSK (MSK(1) << GIC_VPE_RMASK_SWINT1_SHF) + +/* GIC_VPE_SMASK Masks */ +#define GIC_VPE_SMASK_WD_SHF 0 +#define GIC_VPE_SMASK_WD_MSK (MSK(1) << GIC_VPE_SMASK_WD_SHF) +#define GIC_VPE_SMASK_CMP_SHF 1 +#define GIC_VPE_SMASK_CMP_MSK (MSK(1) << GIC_VPE_SMASK_CMP_SHF) +#define GIC_VPE_SMASK_TIMER_SHF 2 +#define GIC_VPE_SMASK_TIMER_MSK (MSK(1) << GIC_VPE_SMASK_TIMER_SHF) +#define GIC_VPE_SMASK_PERFCNT_SHF 3 +#define GIC_VPE_SMASK_PERFCNT_MSK (MSK(1) << GIC_VPE_SMASK_PERFCNT_SHF) +#define GIC_VPE_SMASK_SWINT0_SHF 4 +#define GIC_VPE_SMASK_SWINT0_MSK (MSK(1) << GIC_VPE_SMASK_SWINT0_SHF) +#define GIC_VPE_SMASK_SWINT1_SHF 5 +#define GIC_VPE_SMASK_SWINT1_MSK (MSK(1) << GIC_VPE_SMASK_SWINT1_SHF) + +/* + * Set the Mapping of Interrupt X to a VPE. + */ +#define GIC_SH_MAP_TO_VPE_SMASK(intr, vpe) \ + GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe)), \ + GIC_SH_MAP_TO_VPE_REG_BIT(vpe)) + +struct gic_pcpu_mask { + DECLARE_BITMAP(pcpu_mask, GIC_NUM_INTRS); +}; + +struct gic_pending_regs { + DECLARE_BITMAP(pending, GIC_NUM_INTRS); +}; + +struct gic_intrmask_regs { + DECLARE_BITMAP(intrmask, GIC_NUM_INTRS); +}; + +/* + * Interrupt Meta-data specification. The ipiflag helps + * in building ipi_map. + */ +struct gic_intr_map { + unsigned int intrnum; /* Ext Intr Num */ + unsigned int cpunum; /* Directed to this CPU */ + unsigned int pin; /* Directed to this Pin */ + unsigned int polarity; /* Polarity : +/- */ + unsigned int trigtype; /* Trigger : Edge/Levl */ + unsigned int ipiflag; /* Is used for IPI ? */ +}; + +extern void gic_init(unsigned long gic_base_addr, + unsigned long gic_addrspace_size, struct gic_intr_map *intrmap, + unsigned int intrmap_size, unsigned int irqbase); + +extern unsigned int gic_get_int(void); +extern void gic_send_ipi(unsigned int intr); + +#endif /* _ASM_GICREGS_H */ diff --git a/arch/mips/include/asm/gpio.h b/arch/mips/include/asm/gpio.h new file mode 100644 index 000000000000..06e46faf862d --- /dev/null +++ b/arch/mips/include/asm/gpio.h @@ -0,0 +1,6 @@ +#ifndef __ASM_MIPS_GPIO_H +#define __ASM_MIPS_GPIO_H + +#include <gpio.h> + +#endif /* __ASM_MIPS_GPIO_H */ diff --git a/arch/mips/include/asm/gt64120.h b/arch/mips/include/asm/gt64120.h new file mode 100644 index 000000000000..e64b41093c49 --- /dev/null +++ b/arch/mips/include/asm/gt64120.h @@ -0,0 +1,580 @@ +/* + * Copyright (C) 2000, 2004, 2005 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard <carstenl@mips.com> + * Maciej W. Rozycki <macro@mips.com> + * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#ifndef _ASM_GT64120_H +#define _ASM_GT64120_H + +#include <linux/clocksource.h> + +#include <asm/addrspace.h> +#include <asm/byteorder.h> + +#define MSK(n) ((1 << (n)) - 1) + +/* + * Register offset addresses + */ +/* CPU Configuration. */ +#define GT_CPU_OFS 0x000 + +#define GT_MULTI_OFS 0x120 + +/* CPU Address Decode. */ +#define GT_SCS10LD_OFS 0x008 +#define GT_SCS10HD_OFS 0x010 +#define GT_SCS32LD_OFS 0x018 +#define GT_SCS32HD_OFS 0x020 +#define GT_CS20LD_OFS 0x028 +#define GT_CS20HD_OFS 0x030 +#define GT_CS3BOOTLD_OFS 0x038 +#define GT_CS3BOOTHD_OFS 0x040 +#define GT_PCI0IOLD_OFS 0x048 +#define GT_PCI0IOHD_OFS 0x050 +#define GT_PCI0M0LD_OFS 0x058 +#define GT_PCI0M0HD_OFS 0x060 +#define GT_ISD_OFS 0x068 + +#define GT_PCI0M1LD_OFS 0x080 +#define GT_PCI0M1HD_OFS 0x088 +#define GT_PCI1IOLD_OFS 0x090 +#define GT_PCI1IOHD_OFS 0x098 +#define GT_PCI1M0LD_OFS 0x0a0 +#define GT_PCI1M0HD_OFS 0x0a8 +#define GT_PCI1M1LD_OFS 0x0b0 +#define GT_PCI1M1HD_OFS 0x0b8 +#define GT_PCI1M1LD_OFS 0x0b0 +#define GT_PCI1M1HD_OFS 0x0b8 + +#define GT_SCS10AR_OFS 0x0d0 +#define GT_SCS32AR_OFS 0x0d8 +#define GT_CS20R_OFS 0x0e0 +#define GT_CS3BOOTR_OFS 0x0e8 + +#define GT_PCI0IOREMAP_OFS 0x0f0 +#define GT_PCI0M0REMAP_OFS 0x0f8 +#define GT_PCI0M1REMAP_OFS 0x100 +#define GT_PCI1IOREMAP_OFS 0x108 +#define GT_PCI1M0REMAP_OFS 0x110 +#define GT_PCI1M1REMAP_OFS 0x118 + +/* CPU Error Report. */ +#define GT_CPUERR_ADDRLO_OFS 0x070 +#define GT_CPUERR_ADDRHI_OFS 0x078 + +#define GT_CPUERR_DATALO_OFS 0x128 /* GT-64120A only */ +#define GT_CPUERR_DATAHI_OFS 0x130 /* GT-64120A only */ +#define GT_CPUERR_PARITY_OFS 0x138 /* GT-64120A only */ + +/* CPU Sync Barrier. */ +#define GT_PCI0SYNC_OFS 0x0c0 +#define GT_PCI1SYNC_OFS 0x0c8 + +/* SDRAM and Device Address Decode. */ +#define GT_SCS0LD_OFS 0x400 +#define GT_SCS0HD_OFS 0x404 +#define GT_SCS1LD_OFS 0x408 +#define GT_SCS1HD_OFS 0x40c +#define GT_SCS2LD_OFS 0x410 +#define GT_SCS2HD_OFS 0x414 +#define GT_SCS3LD_OFS 0x418 +#define GT_SCS3HD_OFS 0x41c +#define GT_CS0LD_OFS 0x420 +#define GT_CS0HD_OFS 0x424 +#define GT_CS1LD_OFS 0x428 +#define GT_CS1HD_OFS 0x42c +#define GT_CS2LD_OFS 0x430 +#define GT_CS2HD_OFS 0x434 +#define GT_CS3LD_OFS 0x438 +#define GT_CS3HD_OFS 0x43c +#define GT_BOOTLD_OFS 0x440 +#define GT_BOOTHD_OFS 0x444 + +#define GT_ADERR_OFS 0x470 + +/* SDRAM Configuration. */ +#define GT_SDRAM_CFG_OFS 0x448 + +#define GT_SDRAM_OPMODE_OFS 0x474 +#define GT_SDRAM_BM_OFS 0x478 +#define GT_SDRAM_ADDRDECODE_OFS 0x47c + +/* SDRAM Parameters. */ +#define GT_SDRAM_B0_OFS 0x44c +#define GT_SDRAM_B1_OFS 0x450 +#define GT_SDRAM_B2_OFS 0x454 +#define GT_SDRAM_B3_OFS 0x458 + +/* Device Parameters. */ +#define GT_DEV_B0_OFS 0x45c +#define GT_DEV_B1_OFS 0x460 +#define GT_DEV_B2_OFS 0x464 +#define GT_DEV_B3_OFS 0x468 +#define GT_DEV_BOOT_OFS 0x46c + +/* ECC. */ +#define GT_ECC_ERRDATALO 0x480 /* GT-64120A only */ +#define GT_ECC_ERRDATAHI 0x484 /* GT-64120A only */ +#define GT_ECC_MEM 0x488 /* GT-64120A only */ +#define GT_ECC_CALC 0x48c /* GT-64120A only */ +#define GT_ECC_ERRADDR 0x490 /* GT-64120A only */ + +/* DMA Record. */ +#define GT_DMA0_CNT_OFS 0x800 +#define GT_DMA1_CNT_OFS 0x804 +#define GT_DMA2_CNT_OFS 0x808 +#define GT_DMA3_CNT_OFS 0x80c +#define GT_DMA0_SA_OFS 0x810 +#define GT_DMA1_SA_OFS 0x814 +#define GT_DMA2_SA_OFS 0x818 +#define GT_DMA3_SA_OFS 0x81c +#define GT_DMA0_DA_OFS 0x820 +#define GT_DMA1_DA_OFS 0x824 +#define GT_DMA2_DA_OFS 0x828 +#define GT_DMA3_DA_OFS 0x82c +#define GT_DMA0_NEXT_OFS 0x830 +#define GT_DMA1_NEXT_OFS 0x834 +#define GT_DMA2_NEXT_OFS 0x838 +#define GT_DMA3_NEXT_OFS 0x83c + +#define GT_DMA0_CUR_OFS 0x870 +#define GT_DMA1_CUR_OFS 0x874 +#define GT_DMA2_CUR_OFS 0x878 +#define GT_DMA3_CUR_OFS 0x87c + +/* DMA Channel Control. */ +#define GT_DMA0_CTRL_OFS 0x840 +#define GT_DMA1_CTRL_OFS 0x844 +#define GT_DMA2_CTRL_OFS 0x848 +#define GT_DMA3_CTRL_OFS 0x84c + +/* DMA Arbiter. */ +#define GT_DMA_ARB_OFS 0x860 + +/* Timer/Counter. */ +#define GT_TC0_OFS 0x850 +#define GT_TC1_OFS 0x854 +#define GT_TC2_OFS 0x858 +#define GT_TC3_OFS 0x85c + +#define GT_TC_CONTROL_OFS 0x864 + +/* PCI Internal. */ +#define GT_PCI0_CMD_OFS 0xc00 +#define GT_PCI0_TOR_OFS 0xc04 +#define GT_PCI0_BS_SCS10_OFS 0xc08 +#define GT_PCI0_BS_SCS32_OFS 0xc0c +#define GT_PCI0_BS_CS20_OFS 0xc10 +#define GT_PCI0_BS_CS3BT_OFS 0xc14 + +#define GT_PCI1_IACK_OFS 0xc30 +#define GT_PCI0_IACK_OFS 0xc34 + +#define GT_PCI0_BARE_OFS 0xc3c +#define GT_PCI0_PREFMBR_OFS 0xc40 + +#define GT_PCI0_SCS10_BAR_OFS 0xc48 +#define GT_PCI0_SCS32_BAR_OFS 0xc4c +#define GT_PCI0_CS20_BAR_OFS 0xc50 +#define GT_PCI0_CS3BT_BAR_OFS 0xc54 +#define GT_PCI0_SSCS10_BAR_OFS 0xc58 +#define GT_PCI0_SSCS32_BAR_OFS 0xc5c + +#define GT_PCI0_SCS3BT_BAR_OFS 0xc64 + +#define GT_PCI1_CMD_OFS 0xc80 +#define GT_PCI1_TOR_OFS 0xc84 +#define GT_PCI1_BS_SCS10_OFS 0xc88 +#define GT_PCI1_BS_SCS32_OFS 0xc8c +#define GT_PCI1_BS_CS20_OFS 0xc90 +#define GT_PCI1_BS_CS3BT_OFS 0xc94 + +#define GT_PCI1_BARE_OFS 0xcbc +#define GT_PCI1_PREFMBR_OFS 0xcc0 + +#define GT_PCI1_SCS10_BAR_OFS 0xcc8 +#define GT_PCI1_SCS32_BAR_OFS 0xccc +#define GT_PCI1_CS20_BAR_OFS 0xcd0 +#define GT_PCI1_CS3BT_BAR_OFS 0xcd4 +#define GT_PCI1_SSCS10_BAR_OFS 0xcd8 +#define GT_PCI1_SSCS32_BAR_OFS 0xcdc + +#define GT_PCI1_SCS3BT_BAR_OFS 0xce4 + +#define GT_PCI1_CFGADDR_OFS 0xcf0 +#define GT_PCI1_CFGDATA_OFS 0xcf4 +#define GT_PCI0_CFGADDR_OFS 0xcf8 +#define GT_PCI0_CFGDATA_OFS 0xcfc + +/* Interrupts. */ +#define GT_INTRCAUSE_OFS 0xc18 +#define GT_INTRMASK_OFS 0xc1c + +#define GT_PCI0_ICMASK_OFS 0xc24 +#define GT_PCI0_SERR0MASK_OFS 0xc28 + +#define GT_CPU_INTSEL_OFS 0xc70 +#define GT_PCI0_INTSEL_OFS 0xc74 + +#define GT_HINTRCAUSE_OFS 0xc98 +#define GT_HINTRMASK_OFS 0xc9c + +#define GT_PCI0_HICMASK_OFS 0xca4 +#define GT_PCI1_SERR1MASK_OFS 0xca8 + + +/* + * I2O Support Registers + */ +#define INBOUND_MESSAGE_REGISTER0_PCI_SIDE 0x010 +#define INBOUND_MESSAGE_REGISTER1_PCI_SIDE 0x014 +#define OUTBOUND_MESSAGE_REGISTER0_PCI_SIDE 0x018 +#define OUTBOUND_MESSAGE_REGISTER1_PCI_SIDE 0x01c +#define INBOUND_DOORBELL_REGISTER_PCI_SIDE 0x020 +#define INBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE 0x024 +#define INBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE 0x028 +#define OUTBOUND_DOORBELL_REGISTER_PCI_SIDE 0x02c +#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE 0x030 +#define OUTBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE 0x034 +#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE 0x040 +#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE 0x044 +#define QUEUE_CONTROL_REGISTER_PCI_SIDE 0x050 +#define QUEUE_BASE_ADDRESS_REGISTER_PCI_SIDE 0x054 +#define INBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE 0x060 +#define INBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE 0x064 +#define INBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE 0x068 +#define INBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE 0x06c +#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE 0x070 +#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE 0x074 +#define OUTBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE 0x078 +#define OUTBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE 0x07c + +#define INBOUND_MESSAGE_REGISTER0_CPU_SIDE 0x1c10 +#define INBOUND_MESSAGE_REGISTER1_CPU_SIDE 0x1c14 +#define OUTBOUND_MESSAGE_REGISTER0_CPU_SIDE 0x1c18 +#define OUTBOUND_MESSAGE_REGISTER1_CPU_SIDE 0x1c1c +#define INBOUND_DOORBELL_REGISTER_CPU_SIDE 0x1c20 +#define INBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE 0x1c24 +#define INBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE 0x1c28 +#define OUTBOUND_DOORBELL_REGISTER_CPU_SIDE 0x1c2c +#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE 0x1c30 +#define OUTBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE 0x1c34 +#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE 0x1c40 +#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE 0x1c44 +#define QUEUE_CONTROL_REGISTER_CPU_SIDE 0x1c50 +#define QUEUE_BASE_ADDRESS_REGISTER_CPU_SIDE 0x1c54 +#define INBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c60 +#define INBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c64 +#define INBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c68 +#define INBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c6c +#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c70 +#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c74 +#define OUTBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c78 +#define OUTBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c7c + +/* + * Register encodings + */ +#define GT_CPU_ENDIAN_SHF 12 +#define GT_CPU_ENDIAN_MSK (MSK(1) << GT_CPU_ENDIAN_SHF) +#define GT_CPU_ENDIAN_BIT GT_CPU_ENDIAN_MSK +#define GT_CPU_WR_SHF 16 +#define GT_CPU_WR_MSK (MSK(1) << GT_CPU_WR_SHF) +#define GT_CPU_WR_BIT GT_CPU_WR_MSK +#define GT_CPU_WR_DXDXDXDX 0 +#define GT_CPU_WR_DDDD 1 + + +#define GT_PCI_DCRM_SHF 21 +#define GT_PCI_LD_SHF 0 +#define GT_PCI_LD_MSK (MSK(15) << GT_PCI_LD_SHF) +#define GT_PCI_HD_SHF 0 +#define GT_PCI_HD_MSK (MSK(7) << GT_PCI_HD_SHF) +#define GT_PCI_REMAP_SHF 0 +#define GT_PCI_REMAP_MSK (MSK(11) << GT_PCI_REMAP_SHF) + + +#define GT_CFGADDR_CFGEN_SHF 31 +#define GT_CFGADDR_CFGEN_MSK (MSK(1) << GT_CFGADDR_CFGEN_SHF) +#define GT_CFGADDR_CFGEN_BIT GT_CFGADDR_CFGEN_MSK + +#define GT_CFGADDR_BUSNUM_SHF 16 +#define GT_CFGADDR_BUSNUM_MSK (MSK(8) << GT_CFGADDR_BUSNUM_SHF) + +#define GT_CFGADDR_DEVNUM_SHF 11 +#define GT_CFGADDR_DEVNUM_MSK (MSK(5) << GT_CFGADDR_DEVNUM_SHF) + +#define GT_CFGADDR_FUNCNUM_SHF 8 +#define GT_CFGADDR_FUNCNUM_MSK (MSK(3) << GT_CFGADDR_FUNCNUM_SHF) + +#define GT_CFGADDR_REGNUM_SHF 2 +#define GT_CFGADDR_REGNUM_MSK (MSK(6) << GT_CFGADDR_REGNUM_SHF) + + +#define GT_SDRAM_BM_ORDER_SHF 2 +#define GT_SDRAM_BM_ORDER_MSK (MSK(1) << GT_SDRAM_BM_ORDER_SHF) +#define GT_SDRAM_BM_ORDER_BIT GT_SDRAM_BM_ORDER_MSK +#define GT_SDRAM_BM_ORDER_SUB 1 +#define GT_SDRAM_BM_ORDER_LIN 0 + +#define GT_SDRAM_BM_RSVD_ALL1 0xffb + + +#define GT_SDRAM_ADDRDECODE_ADDR_SHF 0 +#define GT_SDRAM_ADDRDECODE_ADDR_MSK (MSK(3) << GT_SDRAM_ADDRDECODE_ADDR_SHF) +#define GT_SDRAM_ADDRDECODE_ADDR_0 0 +#define GT_SDRAM_ADDRDECODE_ADDR_1 1 +#define GT_SDRAM_ADDRDECODE_ADDR_2 2 +#define GT_SDRAM_ADDRDECODE_ADDR_3 3 +#define GT_SDRAM_ADDRDECODE_ADDR_4 4 +#define GT_SDRAM_ADDRDECODE_ADDR_5 5 +#define GT_SDRAM_ADDRDECODE_ADDR_6 6 +#define GT_SDRAM_ADDRDECODE_ADDR_7 7 + + +#define GT_SDRAM_B0_CASLAT_SHF 0 +#define GT_SDRAM_B0_CASLAT_MSK (MSK(2) << GT_SDRAM_B0__SHF) +#define GT_SDRAM_B0_CASLAT_2 1 +#define GT_SDRAM_B0_CASLAT_3 2 + +#define GT_SDRAM_B0_FTDIS_SHF 2 +#define GT_SDRAM_B0_FTDIS_MSK (MSK(1) << GT_SDRAM_B0_FTDIS_SHF) +#define GT_SDRAM_B0_FTDIS_BIT GT_SDRAM_B0_FTDIS_MSK + +#define GT_SDRAM_B0_SRASPRCHG_SHF 3 +#define GT_SDRAM_B0_SRASPRCHG_MSK (MSK(1) << GT_SDRAM_B0_SRASPRCHG_SHF) +#define GT_SDRAM_B0_SRASPRCHG_BIT GT_SDRAM_B0_SRASPRCHG_MSK +#define GT_SDRAM_B0_SRASPRCHG_2 0 +#define GT_SDRAM_B0_SRASPRCHG_3 1 + +#define GT_SDRAM_B0_B0COMPAB_SHF 4 +#define GT_SDRAM_B0_B0COMPAB_MSK (MSK(1) << GT_SDRAM_B0_B0COMPAB_SHF) +#define GT_SDRAM_B0_B0COMPAB_BIT GT_SDRAM_B0_B0COMPAB_MSK + +#define GT_SDRAM_B0_64BITINT_SHF 5 +#define GT_SDRAM_B0_64BITINT_MSK (MSK(1) << GT_SDRAM_B0_64BITINT_SHF) +#define GT_SDRAM_B0_64BITINT_BIT GT_SDRAM_B0_64BITINT_MSK +#define GT_SDRAM_B0_64BITINT_2 0 +#define GT_SDRAM_B0_64BITINT_4 1 + +#define GT_SDRAM_B0_BW_SHF 6 +#define GT_SDRAM_B0_BW_MSK (MSK(1) << GT_SDRAM_B0_BW_SHF) +#define GT_SDRAM_B0_BW_BIT GT_SDRAM_B0_BW_MSK +#define GT_SDRAM_B0_BW_32 0 +#define GT_SDRAM_B0_BW_64 1 + +#define GT_SDRAM_B0_BLODD_SHF 7 +#define GT_SDRAM_B0_BLODD_MSK (MSK(1) << GT_SDRAM_B0_BLODD_SHF) +#define GT_SDRAM_B0_BLODD_BIT GT_SDRAM_B0_BLODD_MSK + +#define GT_SDRAM_B0_PAR_SHF 8 +#define GT_SDRAM_B0_PAR_MSK (MSK(1) << GT_SDRAM_B0_PAR_SHF) +#define GT_SDRAM_B0_PAR_BIT GT_SDRAM_B0_PAR_MSK + +#define GT_SDRAM_B0_BYPASS_SHF 9 +#define GT_SDRAM_B0_BYPASS_MSK (MSK(1) << GT_SDRAM_B0_BYPASS_SHF) +#define GT_SDRAM_B0_BYPASS_BIT GT_SDRAM_B0_BYPASS_MSK + +#define GT_SDRAM_B0_SRAS2SCAS_SHF 10 +#define GT_SDRAM_B0_SRAS2SCAS_MSK (MSK(1) << GT_SDRAM_B0_SRAS2SCAS_SHF) +#define GT_SDRAM_B0_SRAS2SCAS_BIT GT_SDRAM_B0_SRAS2SCAS_MSK +#define GT_SDRAM_B0_SRAS2SCAS_2 0 +#define GT_SDRAM_B0_SRAS2SCAS_3 1 + +#define GT_SDRAM_B0_SIZE_SHF 11 +#define GT_SDRAM_B0_SIZE_MSK (MSK(1) << GT_SDRAM_B0_SIZE_SHF) +#define GT_SDRAM_B0_SIZE_BIT GT_SDRAM_B0_SIZE_MSK +#define GT_SDRAM_B0_SIZE_16M 0 +#define GT_SDRAM_B0_SIZE_64M 1 + +#define GT_SDRAM_B0_EXTPAR_SHF 12 +#define GT_SDRAM_B0_EXTPAR_MSK (MSK(1) << GT_SDRAM_B0_EXTPAR_SHF) +#define GT_SDRAM_B0_EXTPAR_BIT GT_SDRAM_B0_EXTPAR_MSK + +#define GT_SDRAM_B0_BLEN_SHF 13 +#define GT_SDRAM_B0_BLEN_MSK (MSK(1) << GT_SDRAM_B0_BLEN_SHF) +#define GT_SDRAM_B0_BLEN_BIT GT_SDRAM_B0_BLEN_MSK +#define GT_SDRAM_B0_BLEN_8 0 +#define GT_SDRAM_B0_BLEN_4 1 + + +#define GT_SDRAM_CFG_REFINT_SHF 0 +#define GT_SDRAM_CFG_REFINT_MSK (MSK(14) << GT_SDRAM_CFG_REFINT_SHF) + +#define GT_SDRAM_CFG_NINTERLEAVE_SHF 14 +#define GT_SDRAM_CFG_NINTERLEAVE_MSK (MSK(1) << GT_SDRAM_CFG_NINTERLEAVE_SHF) +#define GT_SDRAM_CFG_NINTERLEAVE_BIT GT_SDRAM_CFG_NINTERLEAVE_MSK + +#define GT_SDRAM_CFG_RMW_SHF 15 +#define GT_SDRAM_CFG_RMW_MSK (MSK(1) << GT_SDRAM_CFG_RMW_SHF) +#define GT_SDRAM_CFG_RMW_BIT GT_SDRAM_CFG_RMW_MSK + +#define GT_SDRAM_CFG_NONSTAGREF_SHF 16 +#define GT_SDRAM_CFG_NONSTAGREF_MSK (MSK(1) << GT_SDRAM_CFG_NONSTAGREF_SHF) +#define GT_SDRAM_CFG_NONSTAGREF_BIT GT_SDRAM_CFG_NONSTAGREF_MSK + +#define GT_SDRAM_CFG_DUPCNTL_SHF 19 +#define GT_SDRAM_CFG_DUPCNTL_MSK (MSK(1) << GT_SDRAM_CFG_DUPCNTL_SHF) +#define GT_SDRAM_CFG_DUPCNTL_BIT GT_SDRAM_CFG_DUPCNTL_MSK + +#define GT_SDRAM_CFG_DUPBA_SHF 20 +#define GT_SDRAM_CFG_DUPBA_MSK (MSK(1) << GT_SDRAM_CFG_DUPBA_SHF) +#define GT_SDRAM_CFG_DUPBA_BIT GT_SDRAM_CFG_DUPBA_MSK + +#define GT_SDRAM_CFG_DUPEOT0_SHF 21 +#define GT_SDRAM_CFG_DUPEOT0_MSK (MSK(1) << GT_SDRAM_CFG_DUPEOT0_SHF) +#define GT_SDRAM_CFG_DUPEOT0_BIT GT_SDRAM_CFG_DUPEOT0_MSK + +#define GT_SDRAM_CFG_DUPEOT1_SHF 22 +#define GT_SDRAM_CFG_DUPEOT1_MSK (MSK(1) << GT_SDRAM_CFG_DUPEOT1_SHF) +#define GT_SDRAM_CFG_DUPEOT1_BIT GT_SDRAM_CFG_DUPEOT1_MSK + +#define GT_SDRAM_OPMODE_OP_SHF 0 +#define GT_SDRAM_OPMODE_OP_MSK (MSK(3) << GT_SDRAM_OPMODE_OP_SHF) +#define GT_SDRAM_OPMODE_OP_NORMAL 0 +#define GT_SDRAM_OPMODE_OP_NOP 1 +#define GT_SDRAM_OPMODE_OP_PRCHG 2 +#define GT_SDRAM_OPMODE_OP_MODE 3 +#define GT_SDRAM_OPMODE_OP_CBR 4 + +#define GT_TC_CONTROL_ENTC0_SHF 0 +#define GT_TC_CONTROL_ENTC0_MSK (MSK(1) << GT_TC_CONTROL_ENTC0_SHF) +#define GT_TC_CONTROL_ENTC0_BIT GT_TC_CONTROL_ENTC0_MSK +#define GT_TC_CONTROL_SELTC0_SHF 1 +#define GT_TC_CONTROL_SELTC0_MSK (MSK(1) << GT_TC_CONTROL_SELTC0_SHF) +#define GT_TC_CONTROL_SELTC0_BIT GT_TC_CONTROL_SELTC0_MSK + + +#define GT_PCI0_BARE_SWSCS3BOOTDIS_SHF 0 +#define GT_PCI0_BARE_SWSCS3BOOTDIS_MSK (MSK(1) << GT_PCI0_BARE_SWSCS3BOOTDIS_SHF) +#define GT_PCI0_BARE_SWSCS3BOOTDIS_BIT GT_PCI0_BARE_SWSCS3BOOTDIS_MSK + +#define GT_PCI0_BARE_SWSCS32DIS_SHF 1 +#define GT_PCI0_BARE_SWSCS32DIS_MSK (MSK(1) << GT_PCI0_BARE_SWSCS32DIS_SHF) +#define GT_PCI0_BARE_SWSCS32DIS_BIT GT_PCI0_BARE_SWSCS32DIS_MSK + +#define GT_PCI0_BARE_SWSCS10DIS_SHF 2 +#define GT_PCI0_BARE_SWSCS10DIS_MSK (MSK(1) << GT_PCI0_BARE_SWSCS10DIS_SHF) +#define GT_PCI0_BARE_SWSCS10DIS_BIT GT_PCI0_BARE_SWSCS10DIS_MSK + +#define GT_PCI0_BARE_INTIODIS_SHF 3 +#define GT_PCI0_BARE_INTIODIS_MSK (MSK(1) << GT_PCI0_BARE_INTIODIS_SHF) +#define GT_PCI0_BARE_INTIODIS_BIT GT_PCI0_BARE_INTIODIS_MSK + +#define GT_PCI0_BARE_INTMEMDIS_SHF 4 +#define GT_PCI0_BARE_INTMEMDIS_MSK (MSK(1) << GT_PCI0_BARE_INTMEMDIS_SHF) +#define GT_PCI0_BARE_INTMEMDIS_BIT GT_PCI0_BARE_INTMEMDIS_MSK + +#define GT_PCI0_BARE_CS3BOOTDIS_SHF 5 +#define GT_PCI0_BARE_CS3BOOTDIS_MSK (MSK(1) << GT_PCI0_BARE_CS3BOOTDIS_SHF) +#define GT_PCI0_BARE_CS3BOOTDIS_BIT GT_PCI0_BARE_CS3BOOTDIS_MSK + +#define GT_PCI0_BARE_CS20DIS_SHF 6 +#define GT_PCI0_BARE_CS20DIS_MSK (MSK(1) << GT_PCI0_BARE_CS20DIS_SHF) +#define GT_PCI0_BARE_CS20DIS_BIT GT_PCI0_BARE_CS20DIS_MSK + +#define GT_PCI0_BARE_SCS32DIS_SHF 7 +#define GT_PCI0_BARE_SCS32DIS_MSK (MSK(1) << GT_PCI0_BARE_SCS32DIS_SHF) +#define GT_PCI0_BARE_SCS32DIS_BIT GT_PCI0_BARE_SCS32DIS_MSK + +#define GT_PCI0_BARE_SCS10DIS_SHF 8 +#define GT_PCI0_BARE_SCS10DIS_MSK (MSK(1) << GT_PCI0_BARE_SCS10DIS_SHF) +#define GT_PCI0_BARE_SCS10DIS_BIT GT_PCI0_BARE_SCS10DIS_MSK + + +#define GT_INTRCAUSE_MASABORT0_SHF 18 +#define GT_INTRCAUSE_MASABORT0_MSK (MSK(1) << GT_INTRCAUSE_MASABORT0_SHF) +#define GT_INTRCAUSE_MASABORT0_BIT GT_INTRCAUSE_MASABORT0_MSK + +#define GT_INTRCAUSE_TARABORT0_SHF 19 +#define GT_INTRCAUSE_TARABORT0_MSK (MSK(1) << GT_INTRCAUSE_TARABORT0_SHF) +#define GT_INTRCAUSE_TARABORT0_BIT GT_INTRCAUSE_TARABORT0_MSK + + +#define GT_PCI0_CFGADDR_REGNUM_SHF 2 +#define GT_PCI0_CFGADDR_REGNUM_MSK (MSK(6) << GT_PCI0_CFGADDR_REGNUM_SHF) +#define GT_PCI0_CFGADDR_FUNCTNUM_SHF 8 +#define GT_PCI0_CFGADDR_FUNCTNUM_MSK (MSK(3) << GT_PCI0_CFGADDR_FUNCTNUM_SHF) +#define GT_PCI0_CFGADDR_DEVNUM_SHF 11 +#define GT_PCI0_CFGADDR_DEVNUM_MSK (MSK(5) << GT_PCI0_CFGADDR_DEVNUM_SHF) +#define GT_PCI0_CFGADDR_BUSNUM_SHF 16 +#define GT_PCI0_CFGADDR_BUSNUM_MSK (MSK(8) << GT_PCI0_CFGADDR_BUSNUM_SHF) +#define GT_PCI0_CFGADDR_CONFIGEN_SHF 31 +#define GT_PCI0_CFGADDR_CONFIGEN_MSK (MSK(1) << GT_PCI0_CFGADDR_CONFIGEN_SHF) +#define GT_PCI0_CFGADDR_CONFIGEN_BIT GT_PCI0_CFGADDR_CONFIGEN_MSK + +#define GT_PCI0_CMD_MBYTESWAP_SHF 0 +#define GT_PCI0_CMD_MBYTESWAP_MSK (MSK(1) << GT_PCI0_CMD_MBYTESWAP_SHF) +#define GT_PCI0_CMD_MBYTESWAP_BIT GT_PCI0_CMD_MBYTESWAP_MSK +#define GT_PCI0_CMD_MWORDSWAP_SHF 10 +#define GT_PCI0_CMD_MWORDSWAP_MSK (MSK(1) << GT_PCI0_CMD_MWORDSWAP_SHF) +#define GT_PCI0_CMD_MWORDSWAP_BIT GT_PCI0_CMD_MWORDSWAP_MSK +#define GT_PCI0_CMD_SBYTESWAP_SHF 16 +#define GT_PCI0_CMD_SBYTESWAP_MSK (MSK(1) << GT_PCI0_CMD_SBYTESWAP_SHF) +#define GT_PCI0_CMD_SBYTESWAP_BIT GT_PCI0_CMD_SBYTESWAP_MSK +#define GT_PCI0_CMD_SWORDSWAP_SHF 11 +#define GT_PCI0_CMD_SWORDSWAP_MSK (MSK(1) << GT_PCI0_CMD_SWORDSWAP_SHF) +#define GT_PCI0_CMD_SWORDSWAP_BIT GT_PCI0_CMD_SWORDSWAP_MSK + +#define GT_INTR_T0EXP_SHF 8 +#define GT_INTR_T0EXP_MSK (MSK(1) << GT_INTR_T0EXP_SHF) +#define GT_INTR_T0EXP_BIT GT_INTR_T0EXP_MSK +#define GT_INTR_RETRYCTR0_SHF 20 +#define GT_INTR_RETRYCTR0_MSK (MSK(1) << GT_INTR_RETRYCTR0_SHF) +#define GT_INTR_RETRYCTR0_BIT GT_INTR_RETRYCTR0_MSK + +/* + * Misc + */ +#define GT_DEF_PCI0_IO_BASE 0x10000000UL +#define GT_DEF_PCI0_IO_SIZE 0x02000000UL +#define GT_DEF_PCI0_MEM0_BASE 0x12000000UL +#define GT_DEF_PCI0_MEM0_SIZE 0x02000000UL +#define GT_DEF_BASE 0x14000000UL + +#define GT_MAX_BANKSIZE (256 * 1024 * 1024) /* Max 256MB bank */ +#define GT_LATTIM_MIN 6 /* Minimum lat */ + +/* + * The gt64120_dep.h file must define the following macros + * + * GT_READ(ofs, data_pointer) + * GT_WRITE(ofs, data) - read/write GT64120 registers in 32bit + * + * TIMER - gt64120 timer irq, temporary solution until + * full gt64120 cascade interrupt support is in place + */ + +#include <mach-gt64120.h> + +/* + * Because of an error/peculiarity in the Galileo chip, we need to swap the + * bytes when running bigendian. We also provide non-swapping versions. + */ +#define __GT_READ(ofs) \ + (*(volatile u32 *)(GT64120_BASE+(ofs))) +#define __GT_WRITE(ofs, data) \ + do { *(volatile u32 *)(GT64120_BASE+(ofs)) = (data); } while (0) +#define GT_READ(ofs) le32_to_cpu(__GT_READ(ofs)) +#define GT_WRITE(ofs, data) __GT_WRITE(ofs, cpu_to_le32(data)) + +extern void gt641xx_set_base_clock(unsigned int clock); +extern int gt641xx_timer0_state(void); + +#endif /* _ASM_GT64120_H */ diff --git a/arch/mips/include/asm/hardirq.h b/arch/mips/include/asm/hardirq.h new file mode 100644 index 000000000000..90bf399e6dd9 --- /dev/null +++ b/arch/mips/include/asm/hardirq.h @@ -0,0 +1,24 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997, 98, 99, 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#ifndef _ASM_HARDIRQ_H +#define _ASM_HARDIRQ_H + +#include <linux/threads.h> +#include <linux/irq.h> + +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ + +extern void ack_bad_irq(unsigned int irq); + +#endif /* _ASM_HARDIRQ_H */ diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h new file mode 100644 index 000000000000..2de638f84c86 --- /dev/null +++ b/arch/mips/include/asm/hazards.h @@ -0,0 +1,271 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 04, 07 Ralf Baechle <ralf@linux-mips.org> + * Copyright (C) MIPS Technologies, Inc. + * written by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef _ASM_HAZARDS_H +#define _ASM_HAZARDS_H + +#ifdef __ASSEMBLY__ +#define ASMMACRO(name, code...) .macro name; code; .endm +#else + +#include <asm/cpu-features.h> + +#define ASMMACRO(name, code...) \ +__asm__(".macro " #name "; " #code "; .endm"); \ + \ +static inline void name(void) \ +{ \ + __asm__ __volatile__ (#name); \ +} + +/* + * MIPS R2 instruction hazard barrier. Needs to be called as a subroutine. + */ +extern void mips_ihb(void); + +#endif + +ASMMACRO(_ssnop, + sll $0, $0, 1 + ) + +ASMMACRO(_ehb, + sll $0, $0, 3 + ) + +/* + * TLB hazards + */ +#if defined(CONFIG_CPU_MIPSR2) + +/* + * MIPSR2 defines ehb for hazard avoidance + */ + +ASMMACRO(mtc0_tlbw_hazard, + _ehb + ) +ASMMACRO(tlbw_use_hazard, + _ehb + ) +ASMMACRO(tlb_probe_hazard, + _ehb + ) +ASMMACRO(irq_enable_hazard, + _ehb + ) +ASMMACRO(irq_disable_hazard, + _ehb + ) +ASMMACRO(back_to_back_c0_hazard, + _ehb + ) +/* + * gcc has a tradition of misscompiling the previous construct using the + * address of a label as argument to inline assembler. Gas otoh has the + * annoying difference between la and dla which are only usable for 32-bit + * rsp. 64-bit code, so can't be used without conditional compilation. + * The alterantive is switching the assembler to 64-bit code which happens + * to work right even for 32-bit code ... + */ +#define instruction_hazard() \ +do { \ + unsigned long tmp; \ + \ + __asm__ __volatile__( \ + " .set mips64r2 \n" \ + " dla %0, 1f \n" \ + " jr.hb %0 \n" \ + " .set mips0 \n" \ + "1: \n" \ + : "=r" (tmp)); \ +} while (0) + +#elif defined(CONFIG_CPU_MIPSR1) + +/* + * These are slightly complicated by the fact that we guarantee R1 kernels to + * run fine on R2 processors. + */ +ASMMACRO(mtc0_tlbw_hazard, + _ssnop; _ssnop; _ehb + ) +ASMMACRO(tlbw_use_hazard, + _ssnop; _ssnop; _ssnop; _ehb + ) +ASMMACRO(tlb_probe_hazard, + _ssnop; _ssnop; _ssnop; _ehb + ) +ASMMACRO(irq_enable_hazard, + _ssnop; _ssnop; _ssnop; _ehb + ) +ASMMACRO(irq_disable_hazard, + _ssnop; _ssnop; _ssnop; _ehb + ) +ASMMACRO(back_to_back_c0_hazard, + _ssnop; _ssnop; _ssnop; _ehb + ) +/* + * gcc has a tradition of misscompiling the previous construct using the + * address of a label as argument to inline assembler. Gas otoh has the + * annoying difference between la and dla which are only usable for 32-bit + * rsp. 64-bit code, so can't be used without conditional compilation. + * The alterantive is switching the assembler to 64-bit code which happens + * to work right even for 32-bit code ... + */ +#define __instruction_hazard() \ +do { \ + unsigned long tmp; \ + \ + __asm__ __volatile__( \ + " .set mips64r2 \n" \ + " dla %0, 1f \n" \ + " jr.hb %0 \n" \ + " .set mips0 \n" \ + "1: \n" \ + : "=r" (tmp)); \ +} while (0) + +#define instruction_hazard() \ +do { \ + if (cpu_has_mips_r2) \ + __instruction_hazard(); \ +} while (0) + +#elif defined(CONFIG_CPU_R10000) + +/* + * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. + */ + +ASMMACRO(mtc0_tlbw_hazard, + ) +ASMMACRO(tlbw_use_hazard, + ) +ASMMACRO(tlb_probe_hazard, + ) +ASMMACRO(irq_enable_hazard, + ) +ASMMACRO(irq_disable_hazard, + ) +ASMMACRO(back_to_back_c0_hazard, + ) +#define instruction_hazard() do { } while (0) + +#elif defined(CONFIG_CPU_RM9000) + +/* + * RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent + * use of the JTLB for instructions should not occur for 4 cpu cycles and use + * for data translations should not occur for 3 cpu cycles. + */ + +ASMMACRO(mtc0_tlbw_hazard, + _ssnop; _ssnop; _ssnop; _ssnop + ) +ASMMACRO(tlbw_use_hazard, + _ssnop; _ssnop; _ssnop; _ssnop + ) +ASMMACRO(tlb_probe_hazard, + _ssnop; _ssnop; _ssnop; _ssnop + ) +ASMMACRO(irq_enable_hazard, + ) +ASMMACRO(irq_disable_hazard, + ) +ASMMACRO(back_to_back_c0_hazard, + ) +#define instruction_hazard() do { } while (0) + +#elif defined(CONFIG_CPU_SB1) + +/* + * Mostly like R4000 for historic reasons + */ +ASMMACRO(mtc0_tlbw_hazard, + ) +ASMMACRO(tlbw_use_hazard, + ) +ASMMACRO(tlb_probe_hazard, + ) +ASMMACRO(irq_enable_hazard, + ) +ASMMACRO(irq_disable_hazard, + _ssnop; _ssnop; _ssnop + ) +ASMMACRO(back_to_back_c0_hazard, + ) +#define instruction_hazard() do { } while (0) + +#else + +/* + * Finally the catchall case for all other processors including R4000, R4400, + * R4600, R4700, R5000, RM7000, NEC VR41xx etc. + * + * The taken branch will result in a two cycle penalty for the two killed + * instructions on R4000 / R4400. Other processors only have a single cycle + * hazard so this is nice trick to have an optimal code for a range of + * processors. + */ +ASMMACRO(mtc0_tlbw_hazard, + nop; nop + ) +ASMMACRO(tlbw_use_hazard, + nop; nop; nop + ) +ASMMACRO(tlb_probe_hazard, + nop; nop; nop + ) +ASMMACRO(irq_enable_hazard, + _ssnop; _ssnop; _ssnop; + ) +ASMMACRO(irq_disable_hazard, + nop; nop; nop + ) +ASMMACRO(back_to_back_c0_hazard, + _ssnop; _ssnop; _ssnop; + ) +#define instruction_hazard() do { } while (0) + +#endif + + +/* FPU hazards */ + +#if defined(CONFIG_CPU_SB1) +ASMMACRO(enable_fpu_hazard, + .set push; + .set mips64; + .set noreorder; + _ssnop; + bnezl $0, .+4; + _ssnop; + .set pop +) +ASMMACRO(disable_fpu_hazard, +) + +#elif defined(CONFIG_CPU_MIPSR2) +ASMMACRO(enable_fpu_hazard, + _ehb +) +ASMMACRO(disable_fpu_hazard, + _ehb +) +#else +ASMMACRO(enable_fpu_hazard, + nop; nop; nop; nop +) +ASMMACRO(disable_fpu_hazard, + _ehb +) +#endif + +#endif /* _ASM_HAZARDS_H */ diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h new file mode 100644 index 000000000000..4374ab2adc75 --- /dev/null +++ b/arch/mips/include/asm/highmem.h @@ -0,0 +1,67 @@ +/* + * highmem.h: virtual kernel memory mappings for high memory + * + * Used in CONFIG_HIGHMEM systems for memory pages which + * are not addressable by direct kernel virtual addresses. + * + * Copyright (C) 1999 Gerhard Wichert, Siemens AG + * Gerhard.Wichert@pdb.siemens.de + * + * + * Redesigned the x86 32-bit VM architecture to deal with + * up to 16 Terabyte physical memory. With current x86 CPUs + * we now support up to 64 Gigabytes physical RAM. + * + * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com> + */ +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef __KERNEL__ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/uaccess.h> +#include <asm/kmap_types.h> + +/* undef for production */ +#define HIGHMEM_DEBUG 1 + +/* declarations for highmem.c */ +extern unsigned long highstart_pfn, highend_pfn; + +extern pte_t *kmap_pte; +extern pgprot_t kmap_prot; +extern pte_t *pkmap_page_table; + +/* + * Right now we initialize only a single pte table. It can be extended + * easily, subsequent pte tables have to be allocated in one physical + * chunk of RAM. + */ +#define LAST_PKMAP 1024 +#define LAST_PKMAP_MASK (LAST_PKMAP-1) +#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +extern void * kmap_high(struct page *page); +extern void kunmap_high(struct page *page); + +extern void *__kmap(struct page *page); +extern void __kunmap(struct page *page); +extern void *__kmap_atomic(struct page *page, enum km_type type); +extern void __kunmap_atomic(void *kvaddr, enum km_type type); +extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type); +extern struct page *__kmap_atomic_to_page(void *ptr); + +#define kmap __kmap +#define kunmap __kunmap +#define kmap_atomic __kmap_atomic +#define kunmap_atomic __kunmap_atomic +#define kmap_atomic_to_page __kmap_atomic_to_page + +#define flush_cache_kmaps() flush_cache_all() + +#endif /* __KERNEL__ */ + +#endif /* _ASM_HIGHMEM_H */ diff --git a/arch/mips/include/asm/hw_irq.h b/arch/mips/include/asm/hw_irq.h new file mode 100644 index 000000000000..aca05a43a97b --- /dev/null +++ b/arch/mips/include/asm/hw_irq.h @@ -0,0 +1,20 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000, 2001, 2002 by Ralf Baechle + */ +#ifndef __ASM_HW_IRQ_H +#define __ASM_HW_IRQ_H + +#include <asm/atomic.h> + +extern atomic_t irq_err_count; + +/* + * interrupt-retrigger: NOP for now. This may not be apropriate for all + * machines, we'll see ... + */ + +#endif /* __ASM_HW_IRQ_H */ diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h new file mode 100644 index 000000000000..5dabc870b322 --- /dev/null +++ b/arch/mips/include/asm/i8253.h @@ -0,0 +1,21 @@ +/* + * Machine specific IO port address definition for generic. + * Written by Osamu Tomita <tomita@cinet.co.jp> + */ +#ifndef __ASM_I8253_H +#define __ASM_I8253_H + +#include <linux/spinlock.h> + +/* i8253A PIT registers */ +#define PIT_MODE 0x43 +#define PIT_CH0 0x40 +#define PIT_CH2 0x42 + +#define PIT_TICK_RATE 1193182UL + +extern spinlock_t i8253_lock; + +extern void setup_pit_timer(void); + +#endif /* __ASM_I8253_H */ diff --git a/arch/mips/include/asm/i8259.h b/arch/mips/include/asm/i8259.h new file mode 100644 index 000000000000..8572a2d90484 --- /dev/null +++ b/arch/mips/include/asm/i8259.h @@ -0,0 +1,86 @@ +/* + * include/asm-mips/i8259.h + * + * i8259A interrupt definitions. + * + * Copyright (C) 2003 Maciej W. Rozycki + * Copyright (C) 2003 Ralf Baechle <ralf@linux-mips.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_I8259_H +#define _ASM_I8259_H + +#include <linux/compiler.h> +#include <linux/spinlock.h> + +#include <asm/io.h> +#include <irq.h> + +/* i8259A PIC registers */ +#define PIC_MASTER_CMD 0x20 +#define PIC_MASTER_IMR 0x21 +#define PIC_MASTER_ISR PIC_MASTER_CMD +#define PIC_MASTER_POLL PIC_MASTER_ISR +#define PIC_MASTER_OCW3 PIC_MASTER_ISR +#define PIC_SLAVE_CMD 0xa0 +#define PIC_SLAVE_IMR 0xa1 + +/* i8259A PIC related value */ +#define PIC_CASCADE_IR 2 +#define MASTER_ICW4_DEFAULT 0x01 +#define SLAVE_ICW4_DEFAULT 0x01 +#define PIC_ICW4_AEOI 2 + +extern spinlock_t i8259A_lock; + +extern int i8259A_irq_pending(unsigned int irq); +extern void make_8259A_irq(unsigned int irq); + +extern void init_i8259_irqs(void); + +/* + * Do the traditional i8259 interrupt polling thing. This is for the few + * cases where no better interrupt acknowledge method is available and we + * absolutely must touch the i8259. + */ +static inline int i8259_irq(void) +{ + int irq; + + spin_lock(&i8259A_lock); + + /* Perform an interrupt acknowledge cycle on controller 1. */ + outb(0x0C, PIC_MASTER_CMD); /* prepare for poll */ + irq = inb(PIC_MASTER_CMD) & 7; + if (irq == PIC_CASCADE_IR) { + /* + * Interrupt is cascaded so perform interrupt + * acknowledge on controller 2. + */ + outb(0x0C, PIC_SLAVE_CMD); /* prepare for poll */ + irq = (inb(PIC_SLAVE_CMD) & 7) + 8; + } + + if (unlikely(irq == 7)) { + /* + * This may be a spurious interrupt. + * + * Read the interrupt status register (ISR). If the most + * significant bit is not set then there is no valid + * interrupt. + */ + outb(0x0B, PIC_MASTER_ISR); /* ISR register */ + if(~inb(PIC_MASTER_ISR) & 0x80) + irq = -1; + } + + spin_unlock(&i8259A_lock); + + return likely(irq >= 0) ? irq + I8259A_IRQ_BASE : irq; +} + +#endif /* _ASM_I8259_H */ diff --git a/arch/mips/include/asm/ide.h b/arch/mips/include/asm/ide.h new file mode 100644 index 000000000000..bb674c3b0303 --- /dev/null +++ b/arch/mips/include/asm/ide.h @@ -0,0 +1,13 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * This file contains the MIPS architecture specific IDE code. + */ +#ifndef __ASM_IDE_H +#define __ASM_IDE_H + +#include <ide.h> + +#endif /* __ASM_IDE_H */ diff --git a/arch/mips/include/asm/inst.h b/arch/mips/include/asm/inst.h new file mode 100644 index 000000000000..6489f00731ca --- /dev/null +++ b/arch/mips/include/asm/inst.h @@ -0,0 +1,394 @@ +/* + * Format of an instruction in memory. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 2000 by Ralf Baechle + * Copyright (C) 2006 by Thiemo Seufer + */ +#ifndef _ASM_INST_H +#define _ASM_INST_H + +/* + * Major opcodes; before MIPS IV cop1x was called cop3. + */ +enum major_op { + spec_op, bcond_op, j_op, jal_op, + beq_op, bne_op, blez_op, bgtz_op, + addi_op, addiu_op, slti_op, sltiu_op, + andi_op, ori_op, xori_op, lui_op, + cop0_op, cop1_op, cop2_op, cop1x_op, + beql_op, bnel_op, blezl_op, bgtzl_op, + daddi_op, daddiu_op, ldl_op, ldr_op, + spec2_op, jalx_op, mdmx_op, spec3_op, + lb_op, lh_op, lwl_op, lw_op, + lbu_op, lhu_op, lwr_op, lwu_op, + sb_op, sh_op, swl_op, sw_op, + sdl_op, sdr_op, swr_op, cache_op, + ll_op, lwc1_op, lwc2_op, pref_op, + lld_op, ldc1_op, ldc2_op, ld_op, + sc_op, swc1_op, swc2_op, major_3b_op, + scd_op, sdc1_op, sdc2_op, sd_op +}; + +/* + * func field of spec opcode. + */ +enum spec_op { + sll_op, movc_op, srl_op, sra_op, + sllv_op, pmon_op, srlv_op, srav_op, + jr_op, jalr_op, movz_op, movn_op, + syscall_op, break_op, spim_op, sync_op, + mfhi_op, mthi_op, mflo_op, mtlo_op, + dsllv_op, spec2_unused_op, dsrlv_op, dsrav_op, + mult_op, multu_op, div_op, divu_op, + dmult_op, dmultu_op, ddiv_op, ddivu_op, + add_op, addu_op, sub_op, subu_op, + and_op, or_op, xor_op, nor_op, + spec3_unused_op, spec4_unused_op, slt_op, sltu_op, + dadd_op, daddu_op, dsub_op, dsubu_op, + tge_op, tgeu_op, tlt_op, tltu_op, + teq_op, spec5_unused_op, tne_op, spec6_unused_op, + dsll_op, spec7_unused_op, dsrl_op, dsra_op, + dsll32_op, spec8_unused_op, dsrl32_op, dsra32_op +}; + +/* + * func field of spec2 opcode. + */ +enum spec2_op { + madd_op, maddu_op, mul_op, spec2_3_unused_op, + msub_op, msubu_op, /* more unused ops */ + clz_op = 0x20, clo_op, + dclz_op = 0x24, dclo_op, + sdbpp_op = 0x3f +}; + +/* + * func field of spec3 opcode. + */ +enum spec3_op { + ext_op, dextm_op, dextu_op, dext_op, + ins_op, dinsm_op, dinsu_op, dins_op, + bshfl_op = 0x20, + dbshfl_op = 0x24, + rdhwr_op = 0x3b +}; + +/* + * rt field of bcond opcodes. + */ +enum rt_op { + bltz_op, bgez_op, bltzl_op, bgezl_op, + spimi_op, unused_rt_op_0x05, unused_rt_op_0x06, unused_rt_op_0x07, + tgei_op, tgeiu_op, tlti_op, tltiu_op, + teqi_op, unused_0x0d_rt_op, tnei_op, unused_0x0f_rt_op, + bltzal_op, bgezal_op, bltzall_op, bgezall_op, + rt_op_0x14, rt_op_0x15, rt_op_0x16, rt_op_0x17, + rt_op_0x18, rt_op_0x19, rt_op_0x1a, rt_op_0x1b, + bposge32_op, rt_op_0x1d, rt_op_0x1e, rt_op_0x1f +}; + +/* + * rs field of cop opcodes. + */ +enum cop_op { + mfc_op = 0x00, dmfc_op = 0x01, + cfc_op = 0x02, mtc_op = 0x04, + dmtc_op = 0x05, ctc_op = 0x06, + bc_op = 0x08, cop_op = 0x10, + copm_op = 0x18 +}; + +/* + * rt field of cop.bc_op opcodes + */ +enum bcop_op { + bcf_op, bct_op, bcfl_op, bctl_op +}; + +/* + * func field of cop0 coi opcodes. + */ +enum cop0_coi_func { + tlbr_op = 0x01, tlbwi_op = 0x02, + tlbwr_op = 0x06, tlbp_op = 0x08, + rfe_op = 0x10, eret_op = 0x18 +}; + +/* + * func field of cop0 com opcodes. + */ +enum cop0_com_func { + tlbr1_op = 0x01, tlbw_op = 0x02, + tlbp1_op = 0x08, dctr_op = 0x09, + dctw_op = 0x0a +}; + +/* + * fmt field of cop1 opcodes. + */ +enum cop1_fmt { + s_fmt, d_fmt, e_fmt, q_fmt, + w_fmt, l_fmt +}; + +/* + * func field of cop1 instructions using d, s or w format. + */ +enum cop1_sdw_func { + fadd_op = 0x00, fsub_op = 0x01, + fmul_op = 0x02, fdiv_op = 0x03, + fsqrt_op = 0x04, fabs_op = 0x05, + fmov_op = 0x06, fneg_op = 0x07, + froundl_op = 0x08, ftruncl_op = 0x09, + fceill_op = 0x0a, ffloorl_op = 0x0b, + fround_op = 0x0c, ftrunc_op = 0x0d, + fceil_op = 0x0e, ffloor_op = 0x0f, + fmovc_op = 0x11, fmovz_op = 0x12, + fmovn_op = 0x13, frecip_op = 0x15, + frsqrt_op = 0x16, fcvts_op = 0x20, + fcvtd_op = 0x21, fcvte_op = 0x22, + fcvtw_op = 0x24, fcvtl_op = 0x25, + fcmp_op = 0x30 +}; + +/* + * func field of cop1x opcodes (MIPS IV). + */ +enum cop1x_func { + lwxc1_op = 0x00, ldxc1_op = 0x01, + pfetch_op = 0x07, swxc1_op = 0x08, + sdxc1_op = 0x09, madd_s_op = 0x20, + madd_d_op = 0x21, madd_e_op = 0x22, + msub_s_op = 0x28, msub_d_op = 0x29, + msub_e_op = 0x2a, nmadd_s_op = 0x30, + nmadd_d_op = 0x31, nmadd_e_op = 0x32, + nmsub_s_op = 0x38, nmsub_d_op = 0x39, + nmsub_e_op = 0x3a +}; + +/* + * func field for mad opcodes (MIPS IV). + */ +enum mad_func { + madd_fp_op = 0x08, msub_fp_op = 0x0a, + nmadd_fp_op = 0x0c, nmsub_fp_op = 0x0e +}; + +/* + * Damn ... bitfields depend from byteorder :-( + */ +#ifdef __MIPSEB__ +struct j_format { /* Jump format */ + unsigned int opcode : 6; + unsigned int target : 26; +}; + +struct i_format { /* Immediate format (addi, lw, ...) */ + unsigned int opcode : 6; + unsigned int rs : 5; + unsigned int rt : 5; + signed int simmediate : 16; +}; + +struct u_format { /* Unsigned immediate format (ori, xori, ...) */ + unsigned int opcode : 6; + unsigned int rs : 5; + unsigned int rt : 5; + unsigned int uimmediate : 16; +}; + +struct c_format { /* Cache (>= R6000) format */ + unsigned int opcode : 6; + unsigned int rs : 5; + unsigned int c_op : 3; + unsigned int cache : 2; + unsigned int simmediate : 16; +}; + +struct r_format { /* Register format */ + unsigned int opcode : 6; + unsigned int rs : 5; + unsigned int rt : 5; + unsigned int rd : 5; + unsigned int re : 5; + unsigned int func : 6; +}; + +struct p_format { /* Performance counter format (R10000) */ + unsigned int opcode : 6; + unsigned int rs : 5; + unsigned int rt : 5; + unsigned int rd : 5; + unsigned int re : 5; + unsigned int func : 6; +}; + +struct f_format { /* FPU register format */ + unsigned int opcode : 6; + unsigned int : 1; + unsigned int fmt : 4; + unsigned int rt : 5; + unsigned int rd : 5; + unsigned int re : 5; + unsigned int func : 6; +}; + +struct ma_format { /* FPU multipy and add format (MIPS IV) */ + unsigned int opcode : 6; + unsigned int fr : 5; + unsigned int ft : 5; + unsigned int fs : 5; + unsigned int fd : 5; + unsigned int func : 4; + unsigned int fmt : 2; +}; + +#elif defined(__MIPSEL__) + +struct j_format { /* Jump format */ + unsigned int target : 26; + unsigned int opcode : 6; +}; + +struct i_format { /* Immediate format */ + signed int simmediate : 16; + unsigned int rt : 5; + unsigned int rs : 5; + unsigned int opcode : 6; +}; + +struct u_format { /* Unsigned immediate format */ + unsigned int uimmediate : 16; + unsigned int rt : 5; + unsigned int rs : 5; + unsigned int opcode : 6; +}; + +struct c_format { /* Cache (>= R6000) format */ + unsigned int simmediate : 16; + unsigned int cache : 2; + unsigned int c_op : 3; + unsigned int rs : 5; + unsigned int opcode : 6; +}; + +struct r_format { /* Register format */ + unsigned int func : 6; + unsigned int re : 5; + unsigned int rd : 5; + unsigned int rt : 5; + unsigned int rs : 5; + unsigned int opcode : 6; +}; + +struct p_format { /* Performance counter format (R10000) */ + unsigned int func : 6; + unsigned int re : 5; + unsigned int rd : 5; + unsigned int rt : 5; + unsigned int rs : 5; + unsigned int opcode : 6; +}; + +struct f_format { /* FPU register format */ + unsigned int func : 6; + unsigned int re : 5; + unsigned int rd : 5; + unsigned int rt : 5; + unsigned int fmt : 4; + unsigned int : 1; + unsigned int opcode : 6; +}; + +struct ma_format { /* FPU multipy and add format (MIPS IV) */ + unsigned int fmt : 2; + unsigned int func : 4; + unsigned int fd : 5; + unsigned int fs : 5; + unsigned int ft : 5; + unsigned int fr : 5; + unsigned int opcode : 6; +}; + +#else /* !defined (__MIPSEB__) && !defined (__MIPSEL__) */ +#error "MIPS but neither __MIPSEL__ nor __MIPSEB__?" +#endif + +union mips_instruction { + unsigned int word; + unsigned short halfword[2]; + unsigned char byte[4]; + struct j_format j_format; + struct i_format i_format; + struct u_format u_format; + struct c_format c_format; + struct r_format r_format; + struct f_format f_format; + struct ma_format ma_format; +}; + +/* HACHACHAHCAHC ... */ + +/* In case some other massaging is needed, keep MIPSInst as wrapper */ + +#define MIPSInst(x) x + +#define I_OPCODE_SFT 26 +#define MIPSInst_OPCODE(x) (MIPSInst(x) >> I_OPCODE_SFT) + +#define I_JTARGET_SFT 0 +#define MIPSInst_JTARGET(x) (MIPSInst(x) & 0x03ffffff) + +#define I_RS_SFT 21 +#define MIPSInst_RS(x) ((MIPSInst(x) & 0x03e00000) >> I_RS_SFT) + +#define I_RT_SFT 16 +#define MIPSInst_RT(x) ((MIPSInst(x) & 0x001f0000) >> I_RT_SFT) + +#define I_IMM_SFT 0 +#define MIPSInst_SIMM(x) ((int)((short)(MIPSInst(x) & 0xffff))) +#define MIPSInst_UIMM(x) (MIPSInst(x) & 0xffff) + +#define I_CACHEOP_SFT 18 +#define MIPSInst_CACHEOP(x) ((MIPSInst(x) & 0x001c0000) >> I_CACHEOP_SFT) + +#define I_CACHESEL_SFT 16 +#define MIPSInst_CACHESEL(x) ((MIPSInst(x) & 0x00030000) >> I_CACHESEL_SFT) + +#define I_RD_SFT 11 +#define MIPSInst_RD(x) ((MIPSInst(x) & 0x0000f800) >> I_RD_SFT) + +#define I_RE_SFT 6 +#define MIPSInst_RE(x) ((MIPSInst(x) & 0x000007c0) >> I_RE_SFT) + +#define I_FUNC_SFT 0 +#define MIPSInst_FUNC(x) (MIPSInst(x) & 0x0000003f) + +#define I_FFMT_SFT 21 +#define MIPSInst_FFMT(x) ((MIPSInst(x) & 0x01e00000) >> I_FFMT_SFT) + +#define I_FT_SFT 16 +#define MIPSInst_FT(x) ((MIPSInst(x) & 0x001f0000) >> I_FT_SFT) + +#define I_FS_SFT 11 +#define MIPSInst_FS(x) ((MIPSInst(x) & 0x0000f800) >> I_FS_SFT) + +#define I_FD_SFT 6 +#define MIPSInst_FD(x) ((MIPSInst(x) & 0x000007c0) >> I_FD_SFT) + +#define I_FR_SFT 21 +#define MIPSInst_FR(x) ((MIPSInst(x) & 0x03e00000) >> I_FR_SFT) + +#define I_FMA_FUNC_SFT 2 +#define MIPSInst_FMA_FUNC(x) ((MIPSInst(x) & 0x0000003c) >> I_FMA_FUNC_SFT) + +#define I_FMA_FFMT_SFT 0 +#define MIPSInst_FMA_FFMT(x) (MIPSInst(x) & 0x00000003) + +typedef unsigned int mips_instruction; + +#endif /* _ASM_INST_H */ diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h new file mode 100644 index 000000000000..501a40b9f18d --- /dev/null +++ b/arch/mips/include/asm/io.h @@ -0,0 +1,589 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995 Waldorf GmbH + * Copyright (C) 1994 - 2000, 06 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. + * Author: Maciej W. Rozycki <macro@mips.com> + */ +#ifndef _ASM_IO_H +#define _ASM_IO_H + +#include <linux/compiler.h> +#include <linux/kernel.h> +#include <linux/types.h> + +#include <asm/addrspace.h> +#include <asm/byteorder.h> +#include <asm/cpu.h> +#include <asm/cpu-features.h> +#include <asm-generic/iomap.h> +#include <asm/page.h> +#include <asm/pgtable-bits.h> +#include <asm/processor.h> +#include <asm/string.h> + +#include <ioremap.h> +#include <mangle-port.h> + +/* + * Slowdown I/O port space accesses for antique hardware. + */ +#undef CONF_SLOWDOWN_IO + +/* + * Raw operations are never swapped in software. OTOH values that raw + * operations are working on may or may not have been swapped by the bus + * hardware. An example use would be for flash memory that's used for + * execute in place. + */ +# define __raw_ioswabb(a, x) (x) +# define __raw_ioswabw(a, x) (x) +# define __raw_ioswabl(a, x) (x) +# define __raw_ioswabq(a, x) (x) +# define ____raw_ioswabq(a, x) (x) + +/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */ + +#define IO_SPACE_LIMIT 0xffff + +/* + * On MIPS I/O ports are memory mapped, so we access them using normal + * load/store instructions. mips_io_port_base is the virtual address to + * which all ports are being mapped. For sake of efficiency some code + * assumes that this is an address that can be loaded with a single lui + * instruction, so the lower 16 bits must be zero. Should be true on + * on any sane architecture; generic code does not use this assumption. + */ +extern const unsigned long mips_io_port_base; + +/* + * Gcc will generate code to load the value of mips_io_port_base after each + * function call which may be fairly wasteful in some cases. So we don't + * play quite by the book. We tell gcc mips_io_port_base is a long variable + * which solves the code generation issue. Now we need to violate the + * aliasing rules a little to make initialization possible and finally we + * will need the barrier() to fight side effects of the aliasing chat. + * This trickery will eventually collapse under gcc's optimizer. Oh well. + */ +static inline void set_io_port_base(unsigned long base) +{ + * (unsigned long *) &mips_io_port_base = base; + barrier(); +} + +/* + * Thanks to James van Artsdalen for a better timing-fix than + * the two short jumps: using outb's to a nonexistent port seems + * to guarantee better timings even on fast machines. + * + * On the other hand, I'd like to be sure of a non-existent port: + * I feel a bit unsafe about using 0x80 (should be safe, though) + * + * Linus + * + */ + +#define __SLOW_DOWN_IO \ + __asm__ __volatile__( \ + "sb\t$0,0x80(%0)" \ + : : "r" (mips_io_port_base)); + +#ifdef CONF_SLOWDOWN_IO +#ifdef REALLY_SLOW_IO +#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; } +#else +#define SLOW_DOWN_IO __SLOW_DOWN_IO +#endif +#else +#define SLOW_DOWN_IO +#endif + +/* + * virt_to_phys - map virtual addresses to physical + * @address: address to remap + * + * The returned physical address is the physical (CPU) mapping for + * the memory address given. It is only valid to use this function on + * addresses directly mapped or allocated via kmalloc. + * + * This function does not give bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline unsigned long virt_to_phys(volatile const void *address) +{ + return (unsigned long)address - PAGE_OFFSET + PHYS_OFFSET; +} + +/* + * phys_to_virt - map physical address to virtual + * @address: address to remap + * + * The returned virtual address is a current CPU mapping for + * the memory address given. It is only valid to use this function on + * addresses that have a kernel mapping + * + * This function does not handle bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline void * phys_to_virt(unsigned long address) +{ + return (void *)(address + PAGE_OFFSET - PHYS_OFFSET); +} + +/* + * ISA I/O bus memory addresses are 1:1 with the physical address. + */ +static inline unsigned long isa_virt_to_bus(volatile void * address) +{ + return (unsigned long)address - PAGE_OFFSET; +} + +static inline void * isa_bus_to_virt(unsigned long address) +{ + return (void *)(address + PAGE_OFFSET); +} + +#define isa_page_to_bus page_to_phys + +/* + * However PCI ones are not necessarily 1:1 and therefore these interfaces + * are forbidden in portable PCI drivers. + * + * Allow them for x86 for legacy drivers, though. + */ +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +/* + * Change "struct page" to physical address. + */ +#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) + +extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags); +extern void __iounmap(const volatile void __iomem *addr); + +static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size, + unsigned long flags) +{ + void __iomem *addr = plat_ioremap(offset, size, flags); + + if (addr) + return addr; + +#define __IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL)) + + if (cpu_has_64bit_addresses) { + u64 base = UNCAC_BASE; + + /* + * R10000 supports a 2 bit uncached attribute therefore + * UNCAC_BASE may not equal IO_BASE. + */ + if (flags == _CACHE_UNCACHED) + base = (u64) IO_BASE; + return (void __iomem *) (unsigned long) (base + offset); + } else if (__builtin_constant_p(offset) && + __builtin_constant_p(size) && __builtin_constant_p(flags)) { + phys_t phys_addr, last_addr; + + phys_addr = fixup_bigphys_addr(offset, size); + + /* Don't allow wraparound or zero size. */ + last_addr = phys_addr + size - 1; + if (!size || last_addr < phys_addr) + return NULL; + + /* + * Map uncached objects in the low 512MB of address + * space using KSEG1. + */ + if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) && + flags == _CACHE_UNCACHED) + return (void __iomem *) + (unsigned long)CKSEG1ADDR(phys_addr); + } + + return __ioremap(offset, size, flags); + +#undef __IS_LOW512 +} + +/* + * ioremap - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + */ +#define ioremap(offset, size) \ + __ioremap_mode((offset), (size), _CACHE_UNCACHED) + +/* + * ioremap_nocache - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap_nocache performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + * + * This version of ioremap ensures that the memory is marked uncachable + * on the CPU as well as honouring existing caching rules from things like + * the PCI bus. Note that there are other caches and buffers on many + * busses. In paticular driver authors should read up on PCI writes + * + * It's useful if some control registers are in such an area and + * write combining or read caching is not desirable: + */ +#define ioremap_nocache(offset, size) \ + __ioremap_mode((offset), (size), _CACHE_UNCACHED) + +/* + * ioremap_cachable - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap_nocache performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + * + * This version of ioremap ensures that the memory is marked cachable by + * the CPU. Also enables full write-combining. Useful for some + * memory-like regions on I/O busses. + */ +#define ioremap_cachable(offset, size) \ + __ioremap_mode((offset), (size), _page_cachable_default) + +/* + * These two are MIPS specific ioremap variant. ioremap_cacheable_cow + * requests a cachable mapping, ioremap_uncached_accelerated requests a + * mapping using the uncached accelerated mode which isn't supported on + * all processors. + */ +#define ioremap_cacheable_cow(offset, size) \ + __ioremap_mode((offset), (size), _CACHE_CACHABLE_COW) +#define ioremap_uncached_accelerated(offset, size) \ + __ioremap_mode((offset), (size), _CACHE_UNCACHED_ACCELERATED) + +static inline void iounmap(const volatile void __iomem *addr) +{ + if (plat_iounmap(addr)) + return; + +#define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1) + + if (cpu_has_64bit_addresses || + (__builtin_constant_p(addr) && __IS_KSEG1(addr))) + return; + + __iounmap(addr); + +#undef __IS_KSEG1 +} + +#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq) \ + \ +static inline void pfx##write##bwlq(type val, \ + volatile void __iomem *mem) \ +{ \ + volatile type *__mem; \ + type __val; \ + \ + __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \ + \ + __val = pfx##ioswab##bwlq(__mem, val); \ + \ + if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ + *__mem = __val; \ + else if (cpu_has_64bits) { \ + unsigned long __flags; \ + type __tmp; \ + \ + if (irq) \ + local_irq_save(__flags); \ + __asm__ __volatile__( \ + ".set mips3" "\t\t# __writeq""\n\t" \ + "dsll32 %L0, %L0, 0" "\n\t" \ + "dsrl32 %L0, %L0, 0" "\n\t" \ + "dsll32 %M0, %M0, 0" "\n\t" \ + "or %L0, %L0, %M0" "\n\t" \ + "sd %L0, %2" "\n\t" \ + ".set mips0" "\n" \ + : "=r" (__tmp) \ + : "0" (__val), "m" (*__mem)); \ + if (irq) \ + local_irq_restore(__flags); \ + } else \ + BUG(); \ +} \ + \ +static inline type pfx##read##bwlq(const volatile void __iomem *mem) \ +{ \ + volatile type *__mem; \ + type __val; \ + \ + __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \ + \ + if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ + __val = *__mem; \ + else if (cpu_has_64bits) { \ + unsigned long __flags; \ + \ + if (irq) \ + local_irq_save(__flags); \ + __asm__ __volatile__( \ + ".set mips3" "\t\t# __readq" "\n\t" \ + "ld %L0, %1" "\n\t" \ + "dsra32 %M0, %L0, 0" "\n\t" \ + "sll %L0, %L0, 0" "\n\t" \ + ".set mips0" "\n" \ + : "=r" (__val) \ + : "m" (*__mem)); \ + if (irq) \ + local_irq_restore(__flags); \ + } else { \ + __val = 0; \ + BUG(); \ + } \ + \ + return pfx##ioswab##bwlq(__mem, __val); \ +} + +#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \ + \ +static inline void pfx##out##bwlq##p(type val, unsigned long port) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \ + \ + __val = pfx##ioswab##bwlq(__addr, val); \ + \ + /* Really, we want this to be atomic */ \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + *__addr = __val; \ + slow; \ +} \ + \ +static inline type pfx##in##bwlq##p(unsigned long port) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \ + \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + __val = *__addr; \ + slow; \ + \ + return pfx##ioswab##bwlq(__addr, __val); \ +} + +#define __BUILD_MEMORY_PFX(bus, bwlq, type) \ + \ +__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1) + +#define BUILDIO_MEM(bwlq, type) \ + \ +__BUILD_MEMORY_PFX(__raw_, bwlq, type) \ +__BUILD_MEMORY_PFX(, bwlq, type) \ +__BUILD_MEMORY_PFX(__mem_, bwlq, type) \ + +BUILDIO_MEM(b, u8) +BUILDIO_MEM(w, u16) +BUILDIO_MEM(l, u32) +BUILDIO_MEM(q, u64) + +#define __BUILD_IOPORT_PFX(bus, bwlq, type) \ + __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \ + __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO) + +#define BUILDIO_IOPORT(bwlq, type) \ + __BUILD_IOPORT_PFX(, bwlq, type) \ + __BUILD_IOPORT_PFX(__mem_, bwlq, type) + +BUILDIO_IOPORT(b, u8) +BUILDIO_IOPORT(w, u16) +BUILDIO_IOPORT(l, u32) +#ifdef CONFIG_64BIT +BUILDIO_IOPORT(q, u64) +#endif + +#define __BUILDIO(bwlq, type) \ + \ +__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0) + +__BUILDIO(q, u64) + +#define readb_relaxed readb +#define readw_relaxed readw +#define readl_relaxed readl +#define readq_relaxed readq + +/* + * Some code tests for these symbols + */ +#define readq readq +#define writeq writeq + +#define __BUILD_MEMORY_STRING(bwlq, type) \ + \ +static inline void writes##bwlq(volatile void __iomem *mem, \ + const void *addr, unsigned int count) \ +{ \ + const volatile type *__addr = addr; \ + \ + while (count--) { \ + __mem_write##bwlq(*__addr, mem); \ + __addr++; \ + } \ +} \ + \ +static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \ + unsigned int count) \ +{ \ + volatile type *__addr = addr; \ + \ + while (count--) { \ + *__addr = __mem_read##bwlq(mem); \ + __addr++; \ + } \ +} + +#define __BUILD_IOPORT_STRING(bwlq, type) \ + \ +static inline void outs##bwlq(unsigned long port, const void *addr, \ + unsigned int count) \ +{ \ + const volatile type *__addr = addr; \ + \ + while (count--) { \ + __mem_out##bwlq(*__addr, port); \ + __addr++; \ + } \ +} \ + \ +static inline void ins##bwlq(unsigned long port, void *addr, \ + unsigned int count) \ +{ \ + volatile type *__addr = addr; \ + \ + while (count--) { \ + *__addr = __mem_in##bwlq(port); \ + __addr++; \ + } \ +} + +#define BUILDSTRING(bwlq, type) \ + \ +__BUILD_MEMORY_STRING(bwlq, type) \ +__BUILD_IOPORT_STRING(bwlq, type) + +BUILDSTRING(b, u8) +BUILDSTRING(w, u16) +BUILDSTRING(l, u32) +#ifdef CONFIG_64BIT +BUILDSTRING(q, u64) +#endif + + +/* Depends on MIPS II instruction set */ +#define mmiowb() asm volatile ("sync" ::: "memory") + +static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) +{ + memset((void __force *) addr, val, count); +} +static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) +{ + memcpy(dst, (void __force *) src, count); +} +static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) +{ + memcpy((void __force *) dst, src, count); +} + +/* + * The caches on some architectures aren't dma-coherent and have need to + * handle this in software. There are three types of operations that + * can be applied to dma buffers. + * + * - dma_cache_wback_inv(start, size) makes caches and coherent by + * writing the content of the caches back to memory, if necessary. + * The function also invalidates the affected part of the caches as + * necessary before DMA transfers from outside to memory. + * - dma_cache_wback(start, size) makes caches and coherent by + * writing the content of the caches back to memory, if necessary. + * The function also invalidates the affected part of the caches as + * necessary before DMA transfers from outside to memory. + * - dma_cache_inv(start, size) invalidates the affected parts of the + * caches. Dirty lines of the caches may be written back or simply + * be discarded. This operation is necessary before dma operations + * to the memory. + * + * This API used to be exported; it now is for arch code internal use only. + */ +#ifdef CONFIG_DMA_NONCOHERENT + +extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size); +extern void (*_dma_cache_wback)(unsigned long start, unsigned long size); +extern void (*_dma_cache_inv)(unsigned long start, unsigned long size); + +#define dma_cache_wback_inv(start, size) _dma_cache_wback_inv(start, size) +#define dma_cache_wback(start, size) _dma_cache_wback(start, size) +#define dma_cache_inv(start, size) _dma_cache_inv(start, size) + +#else /* Sane hardware */ + +#define dma_cache_wback_inv(start,size) \ + do { (void) (start); (void) (size); } while (0) +#define dma_cache_wback(start,size) \ + do { (void) (start); (void) (size); } while (0) +#define dma_cache_inv(start,size) \ + do { (void) (start); (void) (size); } while (0) + +#endif /* CONFIG_DMA_NONCOHERENT */ + +/* + * Read a 32-bit register that requires a 64-bit read cycle on the bus. + * Avoid interrupt mucking, just adjust the address for 4-byte access. + * Assume the addresses are 8-byte aligned. + */ +#ifdef __MIPSEB__ +#define __CSR_32_ADJUST 4 +#else +#define __CSR_32_ADJUST 0 +#endif + +#define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v)) +#define csr_in32(a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST)) + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* _ASM_IO_H */ diff --git a/arch/mips/include/asm/ioctl.h b/arch/mips/include/asm/ioctl.h new file mode 100644 index 000000000000..85067e248a83 --- /dev/null +++ b/arch/mips/include/asm/ioctl.h @@ -0,0 +1,94 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 99, 2001 Ralf Baechle + */ +#ifndef _ASM_IOCTL_H +#define _ASM_IOCTL_H + +/* + * The original linux ioctl numbering scheme was just a general + * "anything goes" setup, where more or less random numbers were + * assigned. Sorry, I was clueless when I started out on this. + * + * On the alpha, we'll try to clean it up a bit, using a more sane + * ioctl numbering, and also trying to be compatible with OSF/1 in + * the process. I'd like to clean it up for the i386 as well, but + * it's so painful recognizing both the new and the old numbers.. + * + * The same applies for for the MIPS ABI; in fact even the macros + * from Linux/Alpha fit almost perfectly. + */ + +#define _IOC_NRBITS 8 +#define _IOC_TYPEBITS 8 +#define _IOC_SIZEBITS 13 +#define _IOC_DIRBITS 3 + +#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1) +#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1) +#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1) +#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1) + +#define _IOC_NRSHIFT 0 +#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS) +#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS) +#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS) + +/* + * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit. + * And this turns out useful to catch old ioctl numbers in header + * files for us. + */ +#define _IOC_NONE 1U +#define _IOC_READ 2U +#define _IOC_WRITE 4U + +/* + * The following are included for compatibility + */ +#define _IOC_VOID 0x20000000 +#define _IOC_OUT 0x40000000 +#define _IOC_IN 0x80000000 +#define _IOC_INOUT (IOC_IN|IOC_OUT) + +#define _IOC(dir, type, nr, size) \ + (((dir) << _IOC_DIRSHIFT) | \ + ((type) << _IOC_TYPESHIFT) | \ + ((nr) << _IOC_NRSHIFT) | \ + ((size) << _IOC_SIZESHIFT)) + +/* provoke compile error for invalid uses of size argument */ +extern unsigned int __invalid_size_argument_for_IOC; +#define _IOC_TYPECHECK(t) \ + ((sizeof(t) == sizeof(t[1]) && \ + sizeof(t) < (1 << _IOC_SIZEBITS)) ? \ + sizeof(t) : __invalid_size_argument_for_IOC) + +/* used to create numbers */ +#define _IO(type, nr) _IOC(_IOC_NONE, (type), (nr), 0) +#define _IOR(type, nr, size) _IOC(_IOC_READ, (type), (nr), (_IOC_TYPECHECK(size))) +#define _IOW(type, nr, size) _IOC(_IOC_WRITE, (type), (nr), (_IOC_TYPECHECK(size))) +#define _IOWR(type, nr, size) _IOC(_IOC_READ|_IOC_WRITE, (type), (nr), (_IOC_TYPECHECK(size))) +#define _IOR_BAD(type, nr, size) _IOC(_IOC_READ, (type), (nr), sizeof(size)) +#define _IOW_BAD(type, nr, size) _IOC(_IOC_WRITE, (type), (nr), sizeof(size)) +#define _IOWR_BAD(type, nr, size) _IOC(_IOC_READ|_IOC_WRITE, (type), (nr), sizeof(size)) + + +/* used to decode them.. */ +#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) +#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK) +#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK) +#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK) + +/* ...and for the drivers/sound files... */ + +#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT) +#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT) +#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT) +#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT) +#define IOCSIZE_SHIFT (_IOC_SIZESHIFT) + +#endif /* _ASM_IOCTL_H */ diff --git a/arch/mips/include/asm/ioctls.h b/arch/mips/include/asm/ioctls.h new file mode 100644 index 000000000000..3f04a995ec54 --- /dev/null +++ b/arch/mips/include/asm/ioctls.h @@ -0,0 +1,109 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1996, 2001 Ralf Baechle + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#ifndef __ASM_IOCTLS_H +#define __ASM_IOCTLS_H + +#include <asm/ioctl.h> + +#define TCGETA 0x5401 +#define TCSETA 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */ +#define TCSETAW 0x5403 +#define TCSETAF 0x5404 + +#define TCSBRK 0x5405 +#define TCXONC 0x5406 +#define TCFLSH 0x5407 + +#define TCGETS 0x540d +#define TCSETS 0x540e +#define TCSETSW 0x540f +#define TCSETSF 0x5410 + +#define TIOCEXCL 0x740d /* set exclusive use of tty */ +#define TIOCNXCL 0x740e /* reset exclusive use of tty */ +#define TIOCOUTQ 0x7472 /* output queue size */ +#define TIOCSTI 0x5472 /* simulate terminal input */ +#define TIOCMGET 0x741d /* get all modem bits */ +#define TIOCMBIS 0x741b /* bis modem bits */ +#define TIOCMBIC 0x741c /* bic modem bits */ +#define TIOCMSET 0x741a /* set all modem bits */ +#define TIOCPKT 0x5470 /* pty: set/clear packet mode */ +#define TIOCPKT_DATA 0x00 /* data packet */ +#define TIOCPKT_FLUSHREAD 0x01 /* flush packet */ +#define TIOCPKT_FLUSHWRITE 0x02 /* flush packet */ +#define TIOCPKT_STOP 0x04 /* stop output */ +#define TIOCPKT_START 0x08 /* start output */ +#define TIOCPKT_NOSTOP 0x10 /* no more ^S, ^Q */ +#define TIOCPKT_DOSTOP 0x20 /* now do ^S ^Q */ +/* #define TIOCPKT_IOCTL 0x40 state change of pty driver */ +#define TIOCSWINSZ _IOW('t', 103, struct winsize) /* set window size */ +#define TIOCGWINSZ _IOR('t', 104, struct winsize) /* get window size */ +#define TIOCNOTTY 0x5471 /* void tty association */ +#define TIOCSETD 0x7401 +#define TIOCGETD 0x7400 + +#define FIOCLEX 0x6601 +#define FIONCLEX 0x6602 +#define FIOASYNC 0x667d +#define FIONBIO 0x667e +#define FIOQSIZE 0x667f + +#define TIOCGLTC 0x7474 /* get special local chars */ +#define TIOCSLTC 0x7475 /* set special local chars */ +#define TIOCSPGRP _IOW('t', 118, int) /* set pgrp of tty */ +#define TIOCGPGRP _IOR('t', 119, int) /* get pgrp of tty */ +#define TIOCCONS _IOW('t', 120, int) /* become virtual console */ + +#define FIONREAD 0x467f +#define TIOCINQ FIONREAD + +#define TIOCGETP 0x7408 +#define TIOCSETP 0x7409 +#define TIOCSETN 0x740a /* TIOCSETP wo flush */ + +/* #define TIOCSETA _IOW('t', 20, struct termios) set termios struct */ +/* #define TIOCSETAW _IOW('t', 21, struct termios) drain output, set */ +/* #define TIOCSETAF _IOW('t', 22, struct termios) drn out, fls in, set */ +/* #define TIOCGETD _IOR('t', 26, int) get line discipline */ +/* #define TIOCSETD _IOW('t', 27, int) set line discipline */ + /* 127-124 compat */ + +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x7416 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T', 0x2A, struct termios2) +#define TCSETS2 _IOW('T', 0x2B, struct termios2) +#define TCSETSW2 _IOW('T', 0x2C, struct termios2) +#define TCSETSF2 _IOW('T', 0x2D, struct termios2) +#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ + +/* I hope the range from 0x5480 on is free ... */ +#define TIOCSCTTY 0x5480 /* become controlling tty */ +#define TIOCGSOFTCAR 0x5481 +#define TIOCSSOFTCAR 0x5482 +#define TIOCLINUX 0x5483 +#define TIOCGSERIAL 0x5484 +#define TIOCSSERIAL 0x5485 +#define TCSBRKP 0x5486 /* Needed for POSIX tcsendbreak() */ +#define TIOCSERCONFIG 0x5488 +#define TIOCSERGWILD 0x5489 +#define TIOCSERSWILD 0x548a +#define TIOCGLCKTRMIOS 0x548b +#define TIOCSLCKTRMIOS 0x548c +#define TIOCSERGSTRUCT 0x548d /* For debugging only */ +#define TIOCSERGETLSR 0x548e /* Get line status register */ +#define TIOCSERGETMULTI 0x548f /* Get multiport config */ +#define TIOCSERSETMULTI 0x5490 /* Set multiport config */ +#define TIOCMIWAIT 0x5491 /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x5492 /* read serial port inline interrupt counts */ +#define TIOCGHAYESESP 0x5493 /* Get Hayes ESP configuration */ +#define TIOCSHAYESESP 0x5494 /* Set Hayes ESP configuration */ + +#endif /* __ASM_IOCTLS_H */ diff --git a/arch/mips/include/asm/ip32/crime.h b/arch/mips/include/asm/ip32/crime.h new file mode 100644 index 000000000000..7c36b0e5b1c6 --- /dev/null +++ b/arch/mips/include/asm/ip32/crime.h @@ -0,0 +1,158 @@ +/* + * Definitions for the SGI CRIME (CPU, Rendering, Interconnect and Memory + * Engine) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Harald Koerfgen + */ + +#ifndef __ASM_CRIME_H__ +#define __ASM_CRIME_H__ + +/* + * Address map + */ +#define CRIME_BASE 0x14000000 /* physical */ + +struct sgi_crime { + volatile unsigned long id; +#define CRIME_ID_MASK 0xff +#define CRIME_ID_IDBITS 0xf0 +#define CRIME_ID_IDVALUE 0xa0 +#define CRIME_ID_REV 0x0f +#define CRIME_REV_PETTY 0x00 +#define CRIME_REV_11 0x11 +#define CRIME_REV_13 0x13 +#define CRIME_REV_14 0x14 + + volatile unsigned long control; +#define CRIME_CONTROL_MASK 0x3fff +#define CRIME_CONTROL_TRITON_SYSADC 0x2000 +#define CRIME_CONTROL_CRIME_SYSADC 0x1000 +#define CRIME_CONTROL_HARD_RESET 0x0800 +#define CRIME_CONTROL_SOFT_RESET 0x0400 +#define CRIME_CONTROL_DOG_ENA 0x0200 +#define CRIME_CONTROL_ENDIANESS 0x0100 +#define CRIME_CONTROL_ENDIAN_BIG 0x0100 +#define CRIME_CONTROL_ENDIAN_LITTLE 0x0000 +#define CRIME_CONTROL_CQUEUE_HWM 0x000f +#define CRIME_CONTROL_CQUEUE_SHFT 0 +#define CRIME_CONTROL_WBUF_HWM 0x00f0 +#define CRIME_CONTROL_WBUF_SHFT 8 + + volatile unsigned long istat; + volatile unsigned long imask; + volatile unsigned long soft_int; + volatile unsigned long hard_int; +#define MACE_VID_IN1_INT BIT(0) +#define MACE_VID_IN2_INT BIT(1) +#define MACE_VID_OUT_INT BIT(2) +#define MACE_ETHERNET_INT BIT(3) +#define MACE_SUPERIO_INT BIT(4) +#define MACE_MISC_INT BIT(5) +#define MACE_AUDIO_INT BIT(6) +#define MACE_PCI_BRIDGE_INT BIT(7) +#define MACEPCI_SCSI0_INT BIT(8) +#define MACEPCI_SCSI1_INT BIT(9) +#define MACEPCI_SLOT0_INT BIT(10) +#define MACEPCI_SLOT1_INT BIT(11) +#define MACEPCI_SLOT2_INT BIT(12) +#define MACEPCI_SHARED0_INT BIT(13) +#define MACEPCI_SHARED1_INT BIT(14) +#define MACEPCI_SHARED2_INT BIT(15) +#define CRIME_GBE0_INT BIT(16) +#define CRIME_GBE1_INT BIT(17) +#define CRIME_GBE2_INT BIT(18) +#define CRIME_GBE3_INT BIT(19) +#define CRIME_CPUERR_INT BIT(20) +#define CRIME_MEMERR_INT BIT(21) +#define CRIME_RE_EMPTY_E_INT BIT(22) +#define CRIME_RE_FULL_E_INT BIT(23) +#define CRIME_RE_IDLE_E_INT BIT(24) +#define CRIME_RE_EMPTY_L_INT BIT(25) +#define CRIME_RE_FULL_L_INT BIT(26) +#define CRIME_RE_IDLE_L_INT BIT(27) +#define CRIME_SOFT0_INT BIT(28) +#define CRIME_SOFT1_INT BIT(29) +#define CRIME_SOFT2_INT BIT(30) +#define CRIME_SYSCORERR_INT CRIME_SOFT2_INT +#define CRIME_VICE_INT BIT(31) +/* Masks for deciding who handles the interrupt */ +#define CRIME_MACE_INT_MASK 0x8f +#define CRIME_MACEISA_INT_MASK 0x70 +#define CRIME_MACEPCI_INT_MASK 0xff00 +#define CRIME_CRIME_INT_MASK 0xffff0000 + + volatile unsigned long watchdog; +#define CRIME_DOG_POWER_ON_RESET 0x00010000 +#define CRIME_DOG_WARM_RESET 0x00080000 +#define CRIME_DOG_TIMEOUT (CRIME_DOG_POWER_ON_RESET|CRIME_DOG_WARM_RESET) +#define CRIME_DOG_VALUE 0x00007fff + + volatile unsigned long timer; +#define CRIME_MASTER_FREQ 66666500 /* Crime upcounter frequency */ +#define CRIME_NS_PER_TICK 15 /* for delay_calibrate */ + + volatile unsigned long cpu_error_addr; +#define CRIME_CPU_ERROR_ADDR_MASK 0x3ffffffff + + volatile unsigned long cpu_error_stat; +#define CRIME_CPU_ERROR_MASK 0x7 /* cpu error stat is 3 bits */ +#define CRIME_CPU_ERROR_CPU_ILL_ADDR 0x4 +#define CRIME_CPU_ERROR_VICE_WRT_PRTY 0x2 +#define CRIME_CPU_ERROR_CPU_WRT_PRTY 0x1 + + unsigned long _pad0[54]; + + volatile unsigned long mc_ctrl; + volatile unsigned long bank_ctrl[8]; +#define CRIME_MEM_BANK_CONTROL_MASK 0x11f /* 9 bits 7:5 reserved */ +#define CRIME_MEM_BANK_CONTROL_ADDR 0x01f +#define CRIME_MEM_BANK_CONTROL_SDRAM_SIZE 0x100 +#define CRIME_MAXBANKS 8 + + volatile unsigned long mem_ref_counter; +#define CRIME_MEM_REF_COUNTER_MASK 0x3ff /* 10bit */ + + volatile unsigned long mem_error_stat; +#define CRIME_MEM_ERROR_STAT_MASK 0x0ff7ffff /* 28-bit register */ +#define CRIME_MEM_ERROR_MACE_ID 0x0000007f +#define CRIME_MEM_ERROR_MACE_ACCESS 0x00000080 +#define CRIME_MEM_ERROR_RE_ID 0x00007f00 +#define CRIME_MEM_ERROR_RE_ACCESS 0x00008000 +#define CRIME_MEM_ERROR_GBE_ACCESS 0x00010000 +#define CRIME_MEM_ERROR_VICE_ACCESS 0x00020000 +#define CRIME_MEM_ERROR_CPU_ACCESS 0x00040000 +#define CRIME_MEM_ERROR_RESERVED 0x00080000 +#define CRIME_MEM_ERROR_SOFT_ERR 0x00100000 +#define CRIME_MEM_ERROR_HARD_ERR 0x00200000 +#define CRIME_MEM_ERROR_MULTIPLE 0x00400000 +#define CRIME_MEM_ERROR_ECC 0x01800000 +#define CRIME_MEM_ERROR_MEM_ECC_RD 0x00800000 +#define CRIME_MEM_ERROR_MEM_ECC_RMW 0x01000000 +#define CRIME_MEM_ERROR_INV 0x0e000000 +#define CRIME_MEM_ERROR_INV_MEM_ADDR_RD 0x02000000 +#define CRIME_MEM_ERROR_INV_MEM_ADDR_WR 0x04000000 +#define CRIME_MEM_ERROR_INV_MEM_ADDR_RMW 0x08000000 + + volatile unsigned long mem_error_addr; +#define CRIME_MEM_ERROR_ADDR_MASK 0x3fffffff + + volatile unsigned long mem_ecc_syn; +#define CRIME_MEM_ERROR_ECC_SYN_MASK 0xffffffff + + volatile unsigned long mem_ecc_chk; +#define CRIME_MEM_ERROR_ECC_CHK_MASK 0xffffffff + + volatile unsigned long mem_ecc_repl; +#define CRIME_MEM_ERROR_ECC_REPL_MASK 0xffffffff +}; + +extern struct sgi_crime __iomem *crime; + +#define CRIME_HI_MEM_BASE 0x40000000 /* this is where whole 1G of RAM is mapped */ + +#endif /* __ASM_CRIME_H__ */ diff --git a/arch/mips/include/asm/ip32/ip32_ints.h b/arch/mips/include/asm/ip32/ip32_ints.h new file mode 100644 index 000000000000..85bc5302bce0 --- /dev/null +++ b/arch/mips/include/asm/ip32/ip32_ints.h @@ -0,0 +1,114 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Harald Koerfgen + */ + +#ifndef __ASM_IP32_INTS_H +#define __ASM_IP32_INTS_H + +#include <asm/irq.h> + +/* + * This list reflects the assignment of interrupt numbers to + * interrupting events. Order is fairly irrelevant to handling + * priority. This differs from irix. + */ + +enum ip32_irq_no { + /* + * CPU interrupts are 0 ... 7 + */ + + CRIME_IRQ_BASE = MIPS_CPU_IRQ_BASE + 8, + + /* + * MACE + */ + MACE_VID_IN1_IRQ = CRIME_IRQ_BASE, + MACE_VID_IN2_IRQ, + MACE_VID_OUT_IRQ, + MACE_ETHERNET_IRQ, + /* SUPERIO, MISC, and AUDIO are MACEISA */ + __MACE_SUPERIO, + __MACE_MISC, + __MACE_AUDIO, + MACE_PCI_BRIDGE_IRQ, + + /* + * MACEPCI + */ + MACEPCI_SCSI0_IRQ, + MACEPCI_SCSI1_IRQ, + MACEPCI_SLOT0_IRQ, + MACEPCI_SLOT1_IRQ, + MACEPCI_SLOT2_IRQ, + MACEPCI_SHARED0_IRQ, + MACEPCI_SHARED1_IRQ, + MACEPCI_SHARED2_IRQ, + + /* + * CRIME + */ + CRIME_GBE0_IRQ, + CRIME_GBE1_IRQ, + CRIME_GBE2_IRQ, + CRIME_GBE3_IRQ, + CRIME_CPUERR_IRQ, + CRIME_MEMERR_IRQ, + CRIME_RE_EMPTY_E_IRQ, + CRIME_RE_FULL_E_IRQ, + CRIME_RE_IDLE_E_IRQ, + CRIME_RE_EMPTY_L_IRQ, + CRIME_RE_FULL_L_IRQ, + CRIME_RE_IDLE_L_IRQ, + CRIME_SOFT0_IRQ, + CRIME_SOFT1_IRQ, + CRIME_SOFT2_IRQ, + CRIME_SYSCORERR_IRQ = CRIME_SOFT2_IRQ, + CRIME_VICE_IRQ, + + /* + * MACEISA + */ + MACEISA_AUDIO_SW_IRQ, + MACEISA_AUDIO_SC_IRQ, + MACEISA_AUDIO1_DMAT_IRQ, + MACEISA_AUDIO1_OF_IRQ, + MACEISA_AUDIO2_DMAT_IRQ, + MACEISA_AUDIO2_MERR_IRQ, + MACEISA_AUDIO3_DMAT_IRQ, + MACEISA_AUDIO3_MERR_IRQ, + MACEISA_RTC_IRQ, + MACEISA_KEYB_IRQ, + /* MACEISA_KEYB_POLL is not an IRQ */ + __MACEISA_KEYB_POLL, + MACEISA_MOUSE_IRQ, + /* MACEISA_MOUSE_POLL is not an IRQ */ + __MACEISA_MOUSE_POLL, + MACEISA_TIMER0_IRQ, + MACEISA_TIMER1_IRQ, + MACEISA_TIMER2_IRQ, + MACEISA_PARALLEL_IRQ, + MACEISA_PAR_CTXA_IRQ, + MACEISA_PAR_CTXB_IRQ, + MACEISA_PAR_MERR_IRQ, + MACEISA_SERIAL1_IRQ, + MACEISA_SERIAL1_TDMAT_IRQ, + MACEISA_SERIAL1_TDMAPR_IRQ, + MACEISA_SERIAL1_TDMAME_IRQ, + MACEISA_SERIAL1_RDMAT_IRQ, + MACEISA_SERIAL1_RDMAOR_IRQ, + MACEISA_SERIAL2_IRQ, + MACEISA_SERIAL2_TDMAT_IRQ, + MACEISA_SERIAL2_TDMAPR_IRQ, + MACEISA_SERIAL2_TDMAME_IRQ, + MACEISA_SERIAL2_RDMAT_IRQ, + MACEISA_SERIAL2_RDMAOR_IRQ, + + IP32_IRQ_MAX = MACEISA_SERIAL2_RDMAOR_IRQ +}; + +#endif /* __ASM_IP32_INTS_H */ diff --git a/arch/mips/include/asm/ip32/mace.h b/arch/mips/include/asm/ip32/mace.h new file mode 100644 index 000000000000..d08d7c672139 --- /dev/null +++ b/arch/mips/include/asm/ip32/mace.h @@ -0,0 +1,365 @@ +/* + * Definitions for the SGI MACE (Multimedia, Audio and Communications Engine) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Harald Koerfgen + * Copyright (C) 2004 Ladislav Michl + */ + +#ifndef __ASM_MACE_H__ +#define __ASM_MACE_H__ + +/* + * Address map + */ +#define MACE_BASE 0x1f000000 /* physical */ + +/* + * PCI interface + */ +struct mace_pci { + volatile unsigned int error_addr; + volatile unsigned int error; +#define MACEPCI_ERROR_MASTER_ABORT BIT(31) +#define MACEPCI_ERROR_TARGET_ABORT BIT(30) +#define MACEPCI_ERROR_DATA_PARITY_ERR BIT(29) +#define MACEPCI_ERROR_RETRY_ERR BIT(28) +#define MACEPCI_ERROR_ILLEGAL_CMD BIT(27) +#define MACEPCI_ERROR_SYSTEM_ERR BIT(26) +#define MACEPCI_ERROR_INTERRUPT_TEST BIT(25) +#define MACEPCI_ERROR_PARITY_ERR BIT(24) +#define MACEPCI_ERROR_OVERRUN BIT(23) +#define MACEPCI_ERROR_RSVD BIT(22) +#define MACEPCI_ERROR_MEMORY_ADDR BIT(21) +#define MACEPCI_ERROR_CONFIG_ADDR BIT(20) +#define MACEPCI_ERROR_MASTER_ABORT_ADDR_VALID BIT(19) +#define MACEPCI_ERROR_TARGET_ABORT_ADDR_VALID BIT(18) +#define MACEPCI_ERROR_DATA_PARITY_ADDR_VALID BIT(17) +#define MACEPCI_ERROR_RETRY_ADDR_VALID BIT(16) +#define MACEPCI_ERROR_SIG_TABORT BIT(4) +#define MACEPCI_ERROR_DEVSEL_MASK 0xc0 +#define MACEPCI_ERROR_DEVSEL_FAST 0 +#define MACEPCI_ERROR_DEVSEL_MED 0x40 +#define MACEPCI_ERROR_DEVSEL_SLOW 0x80 +#define MACEPCI_ERROR_FBB BIT(1) +#define MACEPCI_ERROR_66MHZ BIT(0) + volatile unsigned int control; +#define MACEPCI_CONTROL_INT(x) BIT(x) +#define MACEPCI_CONTROL_INT_MASK 0xff +#define MACEPCI_CONTROL_SERR_ENA BIT(8) +#define MACEPCI_CONTROL_ARB_N6 BIT(9) +#define MACEPCI_CONTROL_PARITY_ERR BIT(10) +#define MACEPCI_CONTROL_MRMRA_ENA BIT(11) +#define MACEPCI_CONTROL_ARB_N3 BIT(12) +#define MACEPCI_CONTROL_ARB_N4 BIT(13) +#define MACEPCI_CONTROL_ARB_N5 BIT(14) +#define MACEPCI_CONTROL_PARK_LIU BIT(15) +#define MACEPCI_CONTROL_INV_INT(x) BIT(16+x) +#define MACEPCI_CONTROL_INV_INT_MASK 0x00ff0000 +#define MACEPCI_CONTROL_OVERRUN_INT BIT(24) +#define MACEPCI_CONTROL_PARITY_INT BIT(25) +#define MACEPCI_CONTROL_SERR_INT BIT(26) +#define MACEPCI_CONTROL_IT_INT BIT(27) +#define MACEPCI_CONTROL_RE_INT BIT(28) +#define MACEPCI_CONTROL_DPED_INT BIT(29) +#define MACEPCI_CONTROL_TAR_INT BIT(30) +#define MACEPCI_CONTROL_MAR_INT BIT(31) + volatile unsigned int rev; + unsigned int _pad[0xcf8/4 - 4]; + volatile unsigned int config_addr; + union { + volatile unsigned char b[4]; + volatile unsigned short w[2]; + volatile unsigned int l; + } config_data; +}; +#define MACEPCI_LOW_MEMORY 0x1a000000 +#define MACEPCI_LOW_IO 0x18000000 +#define MACEPCI_SWAPPED_VIEW 0 +#define MACEPCI_NATIVE_VIEW 0x40000000 +#define MACEPCI_IO 0x80000000 +#define MACEPCI_HI_MEMORY 0x280000000 +#define MACEPCI_HI_IO 0x100000000 + +/* + * Video interface + */ +struct mace_video { + unsigned long xxx; /* later... */ +}; + +/* + * Ethernet interface + */ +struct mace_ethernet { + volatile unsigned long mac_ctrl; + volatile unsigned long int_stat; + volatile unsigned long dma_ctrl; + volatile unsigned long timer; + volatile unsigned long tx_int_al; + volatile unsigned long rx_int_al; + volatile unsigned long tx_info; + volatile unsigned long tx_info_al; + volatile unsigned long rx_buff; + volatile unsigned long rx_buff_al1; + volatile unsigned long rx_buff_al2; + volatile unsigned long diag; + volatile unsigned long phy_data; + volatile unsigned long phy_regs; + volatile unsigned long phy_trans_go; + volatile unsigned long backoff_seed; + /*===================================*/ + volatile unsigned long imq_reserved[4]; + volatile unsigned long mac_addr; + volatile unsigned long mac_addr2; + volatile unsigned long mcast_filter; + volatile unsigned long tx_ring_base; + /* Following are read-only registers for debugging */ + volatile unsigned long tx_pkt1_hdr; + volatile unsigned long tx_pkt1_ptr[3]; + volatile unsigned long tx_pkt2_hdr; + volatile unsigned long tx_pkt2_ptr[3]; + /*===================================*/ + volatile unsigned long rx_fifo; +}; + +/* + * Peripherals + */ + +/* Audio registers */ +struct mace_audio { + volatile unsigned long control; + volatile unsigned long codec_control; /* codec status control */ + volatile unsigned long codec_mask; /* codec status input mask */ + volatile unsigned long codec_read; /* codec status read data */ + struct { + volatile unsigned long control; /* channel control */ + volatile unsigned long read_ptr; /* channel read pointer */ + volatile unsigned long write_ptr; /* channel write pointer */ + volatile unsigned long depth; /* channel depth */ + } chan[3]; +}; + + +/* register definitions for parallel port DMA */ +struct mace_parport { + /* 0 - do nothing, + * 1 - pulse terminal count to the device after buffer is drained */ +#define MACEPAR_CONTEXT_LASTFLAG BIT(63) + /* Should not cross 4K page boundary */ +#define MACEPAR_CONTEXT_DATA_BOUND 0x0000000000001000UL +#define MACEPAR_CONTEXT_DATALEN_MASK 0x00000fff00000000UL +#define MACEPAR_CONTEXT_DATALEN_SHIFT 32 + /* Can be arbitrarily aligned on any byte boundary on output, + * 64 byte aligned on input */ +#define MACEPAR_CONTEXT_BASEADDR_MASK 0x00000000ffffffffUL + volatile u64 context_a; + volatile u64 context_b; + /* 0 - mem->device, 1 - device->mem */ +#define MACEPAR_CTLSTAT_DIRECTION BIT(0) + /* 0 - channel frozen, 1 - channel enabled */ +#define MACEPAR_CTLSTAT_ENABLE BIT(1) + /* 0 - channel active, 1 - complete channel reset */ +#define MACEPAR_CTLSTAT_RESET BIT(2) +#define MACEPAR_CTLSTAT_CTXB_VALID BIT(3) +#define MACEPAR_CTLSTAT_CTXA_VALID BIT(4) + volatile u64 cntlstat; /* Control/Status register */ +#define MACEPAR_DIAG_CTXINUSE BIT(0) + /* 1 - Dma engine is enabled and processing something */ +#define MACEPAR_DIAG_DMACTIVE BIT(1) + /* Counter of bytes left */ +#define MACEPAR_DIAG_CTRMASK 0x0000000000003ffcUL +#define MACEPAR_DIAG_CTRSHIFT 2 + volatile u64 diagnostic; /* RO: diagnostic register */ +}; + +/* ISA Control and DMA registers */ +struct mace_isactrl { + volatile unsigned long ringbase; +#define MACEISA_RINGBUFFERS_SIZE (8 * 4096) + + volatile unsigned long misc; +#define MACEISA_FLASH_WE BIT(0) /* 1=> Enable FLASH writes */ +#define MACEISA_PWD_CLEAR BIT(1) /* 1=> PWD CLEAR jumper detected */ +#define MACEISA_NIC_DEASSERT BIT(2) +#define MACEISA_NIC_DATA BIT(3) +#define MACEISA_LED_RED BIT(4) /* 0=> Illuminate red LED */ +#define MACEISA_LED_GREEN BIT(5) /* 0=> Illuminate green LED */ +#define MACEISA_DP_RAM_ENABLE BIT(6) + + volatile unsigned long istat; + volatile unsigned long imask; +#define MACEISA_AUDIO_SW_INT BIT(0) +#define MACEISA_AUDIO_SC_INT BIT(1) +#define MACEISA_AUDIO1_DMAT_INT BIT(2) +#define MACEISA_AUDIO1_OF_INT BIT(3) +#define MACEISA_AUDIO2_DMAT_INT BIT(4) +#define MACEISA_AUDIO2_MERR_INT BIT(5) +#define MACEISA_AUDIO3_DMAT_INT BIT(6) +#define MACEISA_AUDIO3_MERR_INT BIT(7) +#define MACEISA_RTC_INT BIT(8) +#define MACEISA_KEYB_INT BIT(9) +#define MACEISA_KEYB_POLL_INT BIT(10) +#define MACEISA_MOUSE_INT BIT(11) +#define MACEISA_MOUSE_POLL_INT BIT(12) +#define MACEISA_TIMER0_INT BIT(13) +#define MACEISA_TIMER1_INT BIT(14) +#define MACEISA_TIMER2_INT BIT(15) +#define MACEISA_PARALLEL_INT BIT(16) +#define MACEISA_PAR_CTXA_INT BIT(17) +#define MACEISA_PAR_CTXB_INT BIT(18) +#define MACEISA_PAR_MERR_INT BIT(19) +#define MACEISA_SERIAL1_INT BIT(20) +#define MACEISA_SERIAL1_TDMAT_INT BIT(21) +#define MACEISA_SERIAL1_TDMAPR_INT BIT(22) +#define MACEISA_SERIAL1_TDMAME_INT BIT(23) +#define MACEISA_SERIAL1_RDMAT_INT BIT(24) +#define MACEISA_SERIAL1_RDMAOR_INT BIT(25) +#define MACEISA_SERIAL2_INT BIT(26) +#define MACEISA_SERIAL2_TDMAT_INT BIT(27) +#define MACEISA_SERIAL2_TDMAPR_INT BIT(28) +#define MACEISA_SERIAL2_TDMAME_INT BIT(29) +#define MACEISA_SERIAL2_RDMAT_INT BIT(30) +#define MACEISA_SERIAL2_RDMAOR_INT BIT(31) + + volatile unsigned long _pad[0x2000/8 - 4]; + + volatile unsigned long dp_ram[0x400]; + struct mace_parport parport; +}; + +/* Keyboard & Mouse registers + * -> drivers/input/serio/maceps2.c */ +struct mace_ps2port { + volatile unsigned long tx; + volatile unsigned long rx; + volatile unsigned long control; + volatile unsigned long status; +}; + +struct mace_ps2 { + struct mace_ps2port keyb; + struct mace_ps2port mouse; +}; + +/* I2C registers + * -> drivers/i2c/algos/i2c-algo-sgi.c */ +struct mace_i2c { + volatile unsigned long config; +#define MACEI2C_RESET BIT(0) +#define MACEI2C_FAST BIT(1) +#define MACEI2C_DATA_OVERRIDE BIT(2) +#define MACEI2C_CLOCK_OVERRIDE BIT(3) +#define MACEI2C_DATA_STATUS BIT(4) +#define MACEI2C_CLOCK_STATUS BIT(5) + volatile unsigned long control; + volatile unsigned long data; +}; + +/* Timer registers */ +typedef union { + volatile unsigned long ust_msc; + struct reg { + volatile unsigned int ust; + volatile unsigned int msc; + } reg; +} timer_reg; + +struct mace_timers { + volatile unsigned long ust; +#define MACE_UST_PERIOD_NS 960 + + volatile unsigned long compare1; + volatile unsigned long compare2; + volatile unsigned long compare3; + + timer_reg audio_in; + timer_reg audio_out1; + timer_reg audio_out2; + timer_reg video_in1; + timer_reg video_in2; + timer_reg video_out; +}; + +struct mace_perif { + struct mace_audio audio; + char _pad0[0x10000 - sizeof(struct mace_audio)]; + + struct mace_isactrl ctrl; + char _pad1[0x10000 - sizeof(struct mace_isactrl)]; + + struct mace_ps2 ps2; + char _pad2[0x10000 - sizeof(struct mace_ps2)]; + + struct mace_i2c i2c; + char _pad3[0x10000 - sizeof(struct mace_i2c)]; + + struct mace_timers timers; + char _pad4[0x10000 - sizeof(struct mace_timers)]; +}; + + +/* + * ISA peripherals + */ + +/* Parallel port */ +struct mace_parallel { +}; + +struct mace_ecp1284 { /* later... */ +}; + +/* Serial port */ +struct mace_serial { + volatile unsigned long xxx; /* later... */ +}; + +struct mace_isa { + struct mace_parallel parallel; + char _pad1[0x8000 - sizeof(struct mace_parallel)]; + + struct mace_ecp1284 ecp1284; + char _pad2[0x8000 - sizeof(struct mace_ecp1284)]; + + struct mace_serial serial1; + char _pad3[0x8000 - sizeof(struct mace_serial)]; + + struct mace_serial serial2; + char _pad4[0x8000 - sizeof(struct mace_serial)]; + + volatile unsigned char rtc[0x10000]; +}; + +struct sgi_mace { + char _reserved[0x80000]; + + struct mace_pci pci; + char _pad0[0x80000 - sizeof(struct mace_pci)]; + + struct mace_video video_in1; + char _pad1[0x80000 - sizeof(struct mace_video)]; + + struct mace_video video_in2; + char _pad2[0x80000 - sizeof(struct mace_video)]; + + struct mace_video video_out; + char _pad3[0x80000 - sizeof(struct mace_video)]; + + struct mace_ethernet eth; + char _pad4[0x80000 - sizeof(struct mace_ethernet)]; + + struct mace_perif perif; + char _pad5[0x80000 - sizeof(struct mace_perif)]; + + struct mace_isa isa; + char _pad6[0x80000 - sizeof(struct mace_isa)]; +}; + +extern struct sgi_mace __iomem *mace; + +#endif /* __ASM_MACE_H__ */ diff --git a/arch/mips/include/asm/ipcbuf.h b/arch/mips/include/asm/ipcbuf.h new file mode 100644 index 000000000000..d47d08f264e7 --- /dev/null +++ b/arch/mips/include/asm/ipcbuf.h @@ -0,0 +1,28 @@ +#ifndef _ASM_IPCBUF_H +#define _ASM_IPCBUF_H + +/* + * The ipc64_perm structure for alpha architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit seq + * - 2 miscellaneous 64-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid_t uid; + __kernel_gid_t gid; + __kernel_uid_t cuid; + __kernel_gid_t cgid; + __kernel_mode_t mode; + unsigned short seq; + unsigned short __pad1; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ASM_IPCBUF_H */ diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h new file mode 100644 index 000000000000..a58f0eecc68f --- /dev/null +++ b/arch/mips/include/asm/irq.h @@ -0,0 +1,163 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle + * Copyright (C) 1995, 96, 97, 98, 99, 2000, 01, 02, 03 by Ralf Baechle + */ +#ifndef _ASM_IRQ_H +#define _ASM_IRQ_H + +#include <linux/linkage.h> + +#include <asm/mipsmtregs.h> + +#include <irq.h> + +#ifdef CONFIG_I8259 +static inline int irq_canonicalize(int irq) +{ + return ((irq == I8259A_IRQ_BASE + 2) ? I8259A_IRQ_BASE + 9 : irq); +} +#else +#define irq_canonicalize(irq) (irq) /* Sane hardware, sane code ... */ +#endif + +#ifdef CONFIG_MIPS_MT_SMTC + +struct irqaction; + +extern unsigned long irq_hwmask[]; +extern int setup_irq_smtc(unsigned int irq, struct irqaction * new, + unsigned long hwmask); + +static inline void smtc_im_ack_irq(unsigned int irq) +{ + if (irq_hwmask[irq] & ST0_IM) + set_c0_status(irq_hwmask[irq] & ST0_IM); +} + +#else + +static inline void smtc_im_ack_irq(unsigned int irq) +{ +} + +#endif /* CONFIG_MIPS_MT_SMTC */ + +#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF +#include <linux/cpumask.h> + +extern void plat_set_irq_affinity(unsigned int irq, cpumask_t affinity); +extern void smtc_forward_irq(unsigned int irq); + +/* + * IRQ affinity hook invoked at the beginning of interrupt dispatch + * if option is enabled. + * + * Up through Linux 2.6.22 (at least) cpumask operations are very + * inefficient on MIPS. Initial prototypes of SMTC IRQ affinity + * used a "fast path" per-IRQ-descriptor cache of affinity information + * to reduce latency. As there is a project afoot to optimize the + * cpumask implementations, this version is optimistically assuming + * that cpumask.h macro overhead is reasonable during interrupt dispatch. + */ +#define IRQ_AFFINITY_HOOK(irq) \ +do { \ + if (!cpu_isset(smp_processor_id(), irq_desc[irq].affinity)) { \ + smtc_forward_irq(irq); \ + irq_exit(); \ + return; \ + } \ +} while (0) + +#else /* Not doing SMTC affinity */ + +#define IRQ_AFFINITY_HOOK(irq) do { } while (0) + +#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ + +#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP + +/* + * Clear interrupt mask handling "backstop" if irq_hwmask + * entry so indicates. This implies that the ack() or end() + * functions will take over re-enabling the low-level mask. + * Otherwise it will be done on return from exception. + */ +#define __DO_IRQ_SMTC_HOOK(irq) \ +do { \ + IRQ_AFFINITY_HOOK(irq); \ + if (irq_hwmask[irq] & 0x0000ff00) \ + write_c0_tccontext(read_c0_tccontext() & \ + ~(irq_hwmask[irq] & 0x0000ff00)); \ +} while (0) + +#define __NO_AFFINITY_IRQ_SMTC_HOOK(irq) \ +do { \ + if (irq_hwmask[irq] & 0x0000ff00) \ + write_c0_tccontext(read_c0_tccontext() & \ + ~(irq_hwmask[irq] & 0x0000ff00)); \ +} while (0) + +#else + +#define __DO_IRQ_SMTC_HOOK(irq) \ +do { \ + IRQ_AFFINITY_HOOK(irq); \ +} while (0) +#define __NO_AFFINITY_IRQ_SMTC_HOOK(irq) do { } while (0) + +#endif + +/* + * do_IRQ handles all normal device IRQ's (the special + * SMP cross-CPU interrupts have their own specific + * handlers). + * + * Ideally there should be away to get this into kernel/irq/handle.c to + * avoid the overhead of a call for just a tiny function ... + */ +#define do_IRQ(irq) \ +do { \ + irq_enter(); \ + __DO_IRQ_SMTC_HOOK(irq); \ + generic_handle_irq(irq); \ + irq_exit(); \ +} while (0) + +#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF +/* + * To avoid inefficient and in some cases pathological re-checking of + * IRQ affinity, we have this variant that skips the affinity check. + */ + + +#define do_IRQ_no_affinity(irq) \ +do { \ + irq_enter(); \ + __NO_AFFINITY_IRQ_SMTC_HOOK(irq); \ + generic_handle_irq(irq); \ + irq_exit(); \ +} while (0) + +#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ + +extern void arch_init_irq(void); +extern void spurious_interrupt(void); + +extern int allocate_irqno(void); +extern void alloc_legacy_irqno(void); +extern void free_irqno(unsigned int irq); + +/* + * Before R2 the timer and performance counter interrupts were both fixed to + * IE7. Since R2 their number has to be read from the c0_intctl register. + */ +#define CP0_LEGACY_COMPARE_IRQ 7 + +extern int cp0_compare_irq; +extern int cp0_perfcount_irq; + +#endif /* _ASM_IRQ_H */ diff --git a/arch/mips/include/asm/irq_cpu.h b/arch/mips/include/asm/irq_cpu.h new file mode 100644 index 000000000000..ef6a07cddb23 --- /dev/null +++ b/arch/mips/include/asm/irq_cpu.h @@ -0,0 +1,20 @@ +/* + * include/asm-mips/irq_cpu.h + * + * MIPS CPU interrupt definitions. + * + * Copyright (C) 2002 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_IRQ_CPU_H +#define _ASM_IRQ_CPU_H + +extern void mips_cpu_irq_init(void); +extern void rm7k_cpu_irq_init(void); +extern void rm9k_cpu_irq_init(void); + +#endif /* _ASM_IRQ_CPU_H */ diff --git a/arch/mips/include/asm/irq_gt641xx.h b/arch/mips/include/asm/irq_gt641xx.h new file mode 100644 index 000000000000..f9a7c3ac2e66 --- /dev/null +++ b/arch/mips/include/asm/irq_gt641xx.h @@ -0,0 +1,60 @@ +/* + * Galileo/Marvell GT641xx IRQ definitions. + * + * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#ifndef _ASM_IRQ_GT641XX_H +#define _ASM_IRQ_GT641XX_H + +#ifndef GT641XX_IRQ_BASE +#define GT641XX_IRQ_BASE 8 +#endif + +#define GT641XX_MEMORY_OUT_OF_RANGE_IRQ (GT641XX_IRQ_BASE + 1) +#define GT641XX_DMA_OUT_OF_RANGE_IRQ (GT641XX_IRQ_BASE + 2) +#define GT641XX_CPU_ACCESS_OUT_OF_RANGE_IRQ (GT641XX_IRQ_BASE + 3) +#define GT641XX_DMA0_IRQ (GT641XX_IRQ_BASE + 4) +#define GT641XX_DMA1_IRQ (GT641XX_IRQ_BASE + 5) +#define GT641XX_DMA2_IRQ (GT641XX_IRQ_BASE + 6) +#define GT641XX_DMA3_IRQ (GT641XX_IRQ_BASE + 7) +#define GT641XX_TIMER0_IRQ (GT641XX_IRQ_BASE + 8) +#define GT641XX_TIMER1_IRQ (GT641XX_IRQ_BASE + 9) +#define GT641XX_TIMER2_IRQ (GT641XX_IRQ_BASE + 10) +#define GT641XX_TIMER3_IRQ (GT641XX_IRQ_BASE + 11) +#define GT641XX_PCI_0_MASTER_READ_ERROR_IRQ (GT641XX_IRQ_BASE + 12) +#define GT641XX_PCI_0_SLAVE_WRITE_ERROR_IRQ (GT641XX_IRQ_BASE + 13) +#define GT641XX_PCI_0_MASTER_WRITE_ERROR_IRQ (GT641XX_IRQ_BASE + 14) +#define GT641XX_PCI_0_SLAVE_READ_ERROR_IRQ (GT641XX_IRQ_BASE + 15) +#define GT641XX_PCI_0_ADDRESS_ERROR_IRQ (GT641XX_IRQ_BASE + 16) +#define GT641XX_MEMORY_ERROR_IRQ (GT641XX_IRQ_BASE + 17) +#define GT641XX_PCI_0_MASTER_ABORT_IRQ (GT641XX_IRQ_BASE + 18) +#define GT641XX_PCI_0_TARGET_ABORT_IRQ (GT641XX_IRQ_BASE + 19) +#define GT641XX_PCI_0_RETRY_TIMEOUT_IRQ (GT641XX_IRQ_BASE + 20) +#define GT641XX_CPU_INT0_IRQ (GT641XX_IRQ_BASE + 21) +#define GT641XX_CPU_INT1_IRQ (GT641XX_IRQ_BASE + 22) +#define GT641XX_CPU_INT2_IRQ (GT641XX_IRQ_BASE + 23) +#define GT641XX_CPU_INT3_IRQ (GT641XX_IRQ_BASE + 24) +#define GT641XX_CPU_INT4_IRQ (GT641XX_IRQ_BASE + 25) +#define GT641XX_PCI_INT0_IRQ (GT641XX_IRQ_BASE + 26) +#define GT641XX_PCI_INT1_IRQ (GT641XX_IRQ_BASE + 27) +#define GT641XX_PCI_INT2_IRQ (GT641XX_IRQ_BASE + 28) +#define GT641XX_PCI_INT3_IRQ (GT641XX_IRQ_BASE + 29) + +extern void gt641xx_irq_dispatch(void); +extern void gt641xx_irq_init(void); + +#endif /* _ASM_IRQ_GT641XX_H */ diff --git a/arch/mips/include/asm/irq_regs.h b/arch/mips/include/asm/irq_regs.h new file mode 100644 index 000000000000..33bd2a06de57 --- /dev/null +++ b/arch/mips/include/asm/irq_regs.h @@ -0,0 +1,21 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_IRQ_REGS_H +#define __ASM_IRQ_REGS_H + +#define ARCH_HAS_OWN_IRQ_REGS + +#include <linux/thread_info.h> + +static inline struct pt_regs *get_irq_regs(void) +{ + return current_thread_info()->regs; +} + +#endif /* __ASM_IRQ_REGS_H */ diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h new file mode 100644 index 000000000000..701ec0ba8fa9 --- /dev/null +++ b/arch/mips/include/asm/irqflags.h @@ -0,0 +1,283 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle + * Copyright (C) 1996 by Paul M. Antoine + * Copyright (C) 1999 Silicon Graphics + * Copyright (C) 2000 MIPS Technologies, Inc. + */ +#ifndef _ASM_IRQFLAGS_H +#define _ASM_IRQFLAGS_H + +#ifndef __ASSEMBLY__ + +#include <linux/compiler.h> +#include <asm/hazards.h> + +__asm__( + " .macro raw_local_irq_enable \n" + " .set push \n" + " .set reorder \n" + " .set noat \n" +#ifdef CONFIG_MIPS_MT_SMTC + " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n" + " ori $1, 0x400 \n" + " xori $1, 0x400 \n" + " mtc0 $1, $2, 1 \n" +#elif defined(CONFIG_CPU_MIPSR2) + " ei \n" +#else + " mfc0 $1,$12 \n" + " ori $1,0x1f \n" + " xori $1,0x1e \n" + " mtc0 $1,$12 \n" +#endif + " irq_enable_hazard \n" + " .set pop \n" + " .endm"); + +extern void smtc_ipi_replay(void); + +static inline void raw_local_irq_enable(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC kernel needs to do a software replay of queued + * IPIs, at the cost of call overhead on each local_irq_enable() + */ + smtc_ipi_replay(); +#endif + __asm__ __volatile__( + "raw_local_irq_enable" + : /* no outputs */ + : /* no inputs */ + : "memory"); +} + + +/* + * For cli() we have to insert nops to make sure that the new value + * has actually arrived in the status register before the end of this + * macro. + * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs + * no nops at all. + */ +/* + * For TX49, operating only IE bit is not enough. + * + * If mfc0 $12 follows store and the mfc0 is last instruction of a + * page and fetching the next instruction causes TLB miss, the result + * of the mfc0 might wrongly contain EXL bit. + * + * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008 + * + * Workaround: mask EXL bit of the result or place a nop before mfc0. + */ +__asm__( + " .macro raw_local_irq_disable\n" + " .set push \n" + " .set noat \n" +#ifdef CONFIG_MIPS_MT_SMTC + " mfc0 $1, $2, 1 \n" + " ori $1, 0x400 \n" + " .set noreorder \n" + " mtc0 $1, $2, 1 \n" +#elif defined(CONFIG_CPU_MIPSR2) + " di \n" +#else + " mfc0 $1,$12 \n" + " ori $1,0x1f \n" + " xori $1,0x1f \n" + " .set noreorder \n" + " mtc0 $1,$12 \n" +#endif + " irq_disable_hazard \n" + " .set pop \n" + " .endm \n"); + +static inline void raw_local_irq_disable(void) +{ + __asm__ __volatile__( + "raw_local_irq_disable" + : /* no outputs */ + : /* no inputs */ + : "memory"); +} + +__asm__( + " .macro raw_local_save_flags flags \n" + " .set push \n" + " .set reorder \n" +#ifdef CONFIG_MIPS_MT_SMTC + " mfc0 \\flags, $2, 1 \n" +#else + " mfc0 \\flags, $12 \n" +#endif + " .set pop \n" + " .endm \n"); + +#define raw_local_save_flags(x) \ +__asm__ __volatile__( \ + "raw_local_save_flags %0" \ + : "=r" (x)) + +__asm__( + " .macro raw_local_irq_save result \n" + " .set push \n" + " .set reorder \n" + " .set noat \n" +#ifdef CONFIG_MIPS_MT_SMTC + " mfc0 \\result, $2, 1 \n" + " ori $1, \\result, 0x400 \n" + " .set noreorder \n" + " mtc0 $1, $2, 1 \n" + " andi \\result, \\result, 0x400 \n" +#elif defined(CONFIG_CPU_MIPSR2) + " di \\result \n" + " andi \\result, 1 \n" +#else + " mfc0 \\result, $12 \n" + " ori $1, \\result, 0x1f \n" + " xori $1, 0x1f \n" + " .set noreorder \n" + " mtc0 $1, $12 \n" +#endif + " irq_disable_hazard \n" + " .set pop \n" + " .endm \n"); + +#define raw_local_irq_save(x) \ +__asm__ __volatile__( \ + "raw_local_irq_save\t%0" \ + : "=r" (x) \ + : /* no inputs */ \ + : "memory") + +__asm__( + " .macro raw_local_irq_restore flags \n" + " .set push \n" + " .set noreorder \n" + " .set noat \n" +#ifdef CONFIG_MIPS_MT_SMTC + "mfc0 $1, $2, 1 \n" + "andi \\flags, 0x400 \n" + "ori $1, 0x400 \n" + "xori $1, 0x400 \n" + "or \\flags, $1 \n" + "mtc0 \\flags, $2, 1 \n" +#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU) + /* + * Slow, but doesn't suffer from a relativly unlikely race + * condition we're having since days 1. + */ + " beqz \\flags, 1f \n" + " di \n" + " ei \n" + "1: \n" +#elif defined(CONFIG_CPU_MIPSR2) + /* + * Fast, dangerous. Life is fun, life is good. + */ + " mfc0 $1, $12 \n" + " ins $1, \\flags, 0, 1 \n" + " mtc0 $1, $12 \n" +#else + " mfc0 $1, $12 \n" + " andi \\flags, 1 \n" + " ori $1, 0x1f \n" + " xori $1, 0x1f \n" + " or \\flags, $1 \n" + " mtc0 \\flags, $12 \n" +#endif + " irq_disable_hazard \n" + " .set pop \n" + " .endm \n"); + + +static inline void raw_local_irq_restore(unsigned long flags) +{ + unsigned long __tmp1; + +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC kernel needs to do a software replay of queued + * IPIs, at the cost of branch and call overhead on each + * local_irq_restore() + */ + if (unlikely(!(flags & 0x0400))) + smtc_ipi_replay(); +#endif + + __asm__ __volatile__( + "raw_local_irq_restore\t%0" + : "=r" (__tmp1) + : "0" (flags) + : "memory"); +} + +static inline void __raw_local_irq_restore(unsigned long flags) +{ + unsigned long __tmp1; + + __asm__ __volatile__( + "raw_local_irq_restore\t%0" + : "=r" (__tmp1) + : "0" (flags) + : "memory"); +} + +static inline int raw_irqs_disabled_flags(unsigned long flags) +{ +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU + */ + return flags & 0x400; +#else + return !(flags & 1); +#endif +} + +#endif + +/* + * Do the CPU's IRQ-state tracing from assembly code. + */ +#ifdef CONFIG_TRACE_IRQFLAGS +/* Reload some registers clobbered by trace_hardirqs_on */ +#ifdef CONFIG_64BIT +# define TRACE_IRQS_RELOAD_REGS \ + LONG_L $11, PT_R11(sp); \ + LONG_L $10, PT_R10(sp); \ + LONG_L $9, PT_R9(sp); \ + LONG_L $8, PT_R8(sp); \ + LONG_L $7, PT_R7(sp); \ + LONG_L $6, PT_R6(sp); \ + LONG_L $5, PT_R5(sp); \ + LONG_L $4, PT_R4(sp); \ + LONG_L $2, PT_R2(sp) +#else +# define TRACE_IRQS_RELOAD_REGS \ + LONG_L $7, PT_R7(sp); \ + LONG_L $6, PT_R6(sp); \ + LONG_L $5, PT_R5(sp); \ + LONG_L $4, PT_R4(sp); \ + LONG_L $2, PT_R2(sp) +#endif +# define TRACE_IRQS_ON \ + CLI; /* make sure trace_hardirqs_on() is called in kernel level */ \ + jal trace_hardirqs_on +# define TRACE_IRQS_ON_RELOAD \ + TRACE_IRQS_ON; \ + TRACE_IRQS_RELOAD_REGS +# define TRACE_IRQS_OFF \ + jal trace_hardirqs_off +#else +# define TRACE_IRQS_ON +# define TRACE_IRQS_ON_RELOAD +# define TRACE_IRQS_OFF +#endif + +#endif /* _ASM_IRQFLAGS_H */ diff --git a/arch/mips/include/asm/isadep.h b/arch/mips/include/asm/isadep.h new file mode 100644 index 000000000000..24c6cda79377 --- /dev/null +++ b/arch/mips/include/asm/isadep.h @@ -0,0 +1,34 @@ +/* + * Various ISA level dependent constants. + * Most of the following constants reflect the different layout + * of Coprocessor 0 registers. + * + * Copyright (c) 1998 Harald Koerfgen + */ + +#ifndef __ASM_ISADEP_H +#define __ASM_ISADEP_H + +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) +/* + * R2000 or R3000 + */ + +/* + * kernel or user mode? (CP0_STATUS) + */ +#define KU_MASK 0x08 +#define KU_USER 0x08 +#define KU_KERN 0x00 + +#else +/* + * kernel or user mode? + */ +#define KU_MASK 0x18 +#define KU_USER 0x10 +#define KU_KERN 0x00 + +#endif + +#endif /* __ASM_ISADEP_H */ diff --git a/arch/mips/include/asm/jazz.h b/arch/mips/include/asm/jazz.h new file mode 100644 index 000000000000..83f449dec95e --- /dev/null +++ b/arch/mips/include/asm/jazz.h @@ -0,0 +1,310 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 - 1998 by Andreas Busse and Ralf Baechle + */ +#ifndef __ASM_JAZZ_H +#define __ASM_JAZZ_H + +/* + * The addresses below are virtual address. The mappings are + * created on startup via wired entries in the tlb. The Mips + * Magnum R3000 and R4000 machines are similar in many aspects, + * but many hardware register are accessible at 0xb9000000 in + * instead of 0xe0000000. + */ + +#define JAZZ_LOCAL_IO_SPACE 0xe0000000 + +/* + * Revision numbers in PICA_ASIC_REVISION + * + * 0xf0000000 - Rev1 + * 0xf0000001 - Rev2 + * 0xf0000002 - Rev3 + */ +#define PICA_ASIC_REVISION 0xe0000008 + +/* + * The segments of the seven segment LED are mapped + * to the control bits as follows: + * + * (7) + * --------- + * | | + * (2) | | (6) + * | (1) | + * --------- + * | | + * (3) | | (5) + * | (4) | + * --------- . (0) + */ +#define PICA_LED 0xe000f000 + +/* + * Some characters for the LED control registers + * The original Mips machines seem to have a LED display + * with integrated decoder while the Acer machines can + * control each of the seven segments and the dot independently. + * It's only a toy, anyway... + */ +#define LED_DOT 0x01 +#define LED_SPACE 0x00 +#define LED_0 0xfc +#define LED_1 0x60 +#define LED_2 0xda +#define LED_3 0xf2 +#define LED_4 0x66 +#define LED_5 0xb6 +#define LED_6 0xbe +#define LED_7 0xe0 +#define LED_8 0xfe +#define LED_9 0xf6 +#define LED_A 0xee +#define LED_b 0x3e +#define LED_C 0x9c +#define LED_d 0x7a +#define LED_E 0x9e +#define LED_F 0x8e + +#ifndef __ASSEMBLY__ + +static __inline__ void pica_set_led(unsigned int bits) +{ + volatile unsigned int *led_register = (unsigned int *) PICA_LED; + + *led_register = bits; +} + +#endif /* !__ASSEMBLY__ */ + +/* + * Base address of the Sonic Ethernet adapter in Jazz machines. + */ +#define JAZZ_ETHERNET_BASE 0xe0001000 + +/* + * Base address of the 53C94 SCSI hostadapter in Jazz machines. + */ +#define JAZZ_SCSI_BASE 0xe0002000 + +/* + * i8042 keyboard controller for JAZZ and PICA chipsets. + * This address is just a guess and seems to differ from + * other mips machines such as RC3xxx... + */ +#define JAZZ_KEYBOARD_ADDRESS 0xe0005000 +#define JAZZ_KEYBOARD_DATA 0xe0005000 +#define JAZZ_KEYBOARD_COMMAND 0xe0005001 + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned char data; + unsigned char command; +} jazz_keyboard_hardware; + +#define jazz_kh ((keyboard_hardware *) JAZZ_KEYBOARD_ADDRESS) + +typedef struct { + unsigned char pad0[3]; + unsigned char data; + unsigned char pad1[3]; + unsigned char command; +} mips_keyboard_hardware; + +/* + * For now. Needs to be changed for RC3xxx support. See below. + */ +#define keyboard_hardware jazz_keyboard_hardware + +#endif /* !__ASSEMBLY__ */ + +/* + * i8042 keyboard controller for most other Mips machines. + */ +#define MIPS_KEYBOARD_ADDRESS 0xb9005000 +#define MIPS_KEYBOARD_DATA 0xb9005003 +#define MIPS_KEYBOARD_COMMAND 0xb9005007 + +/* + * Serial and parallel ports (WD 16C552) on the Mips JAZZ + */ +#define JAZZ_SERIAL1_BASE (unsigned int)0xe0006000 +#define JAZZ_SERIAL2_BASE (unsigned int)0xe0007000 +#define JAZZ_PARALLEL_BASE (unsigned int)0xe0008000 + +/* + * Dummy Device Address. Used in jazzdma.c + */ +#define JAZZ_DUMMY_DEVICE 0xe000d000 + +/* + * JAZZ timer registers and interrupt no. + * Note that the hardware timer interrupt is actually on + * cpu level 6, but to keep compatibility with PC stuff + * it is remapped to vector 0. See arch/mips/kernel/entry.S. + */ +#define JAZZ_TIMER_INTERVAL 0xe0000228 +#define JAZZ_TIMER_REGISTER 0xe0000230 + +/* + * DRAM configuration register + */ +#ifndef __ASSEMBLY__ +#ifdef __MIPSEL__ +typedef struct { + unsigned int bank2 : 3; + unsigned int bank1 : 3; + unsigned int mem_bus_width : 1; + unsigned int reserved2 : 1; + unsigned int page_mode : 1; + unsigned int reserved1 : 23; +} dram_configuration; +#else /* defined (__MIPSEB__) */ +typedef struct { + unsigned int reserved1 : 23; + unsigned int page_mode : 1; + unsigned int reserved2 : 1; + unsigned int mem_bus_width : 1; + unsigned int bank1 : 3; + unsigned int bank2 : 3; +} dram_configuration; +#endif +#endif /* !__ASSEMBLY__ */ + +#define PICA_DRAM_CONFIG 0xe00fffe0 + +/* + * JAZZ interrupt control registers + */ +#define JAZZ_IO_IRQ_SOURCE 0xe0010000 +#define JAZZ_IO_IRQ_ENABLE 0xe0010002 + +/* + * JAZZ Interrupt Level definitions + * + * This is somewhat broken. For reasons which nobody can remember anymore + * we remap the Jazz interrupts to the usual ISA style interrupt numbers. + */ +#define JAZZ_IRQ_START 24 +#define JAZZ_IRQ_END (24 + 9) +#define JAZZ_PARALLEL_IRQ (JAZZ_IRQ_START + 0) +#define JAZZ_FLOPPY_IRQ (JAZZ_IRQ_START + 1) +#define JAZZ_SOUND_IRQ (JAZZ_IRQ_START + 2) +#define JAZZ_VIDEO_IRQ (JAZZ_IRQ_START + 3) +#define JAZZ_ETHERNET_IRQ (JAZZ_IRQ_START + 4) +#define JAZZ_SCSI_IRQ (JAZZ_IRQ_START + 5) +#define JAZZ_KEYBOARD_IRQ (JAZZ_IRQ_START + 6) +#define JAZZ_MOUSE_IRQ (JAZZ_IRQ_START + 7) +#define JAZZ_SERIAL1_IRQ (JAZZ_IRQ_START + 8) +#define JAZZ_SERIAL2_IRQ (JAZZ_IRQ_START + 9) + +#define JAZZ_TIMER_IRQ (MIPS_CPU_IRQ_BASE+6) + + +/* + * JAZZ DMA Channels + * Note: Channels 4...7 are not used with respect to the Acer PICA-61 + * chipset which does not provide these DMA channels. + */ +#define JAZZ_SCSI_DMA 0 /* SCSI */ +#define JAZZ_FLOPPY_DMA 1 /* FLOPPY */ +#define JAZZ_AUDIOL_DMA 2 /* AUDIO L */ +#define JAZZ_AUDIOR_DMA 3 /* AUDIO R */ + +/* + * JAZZ R4030 MCT_ADR chip (DMA controller) + * Note: Virtual Addresses ! + */ +#define JAZZ_R4030_CONFIG 0xE0000000 /* R4030 config register */ +#define JAZZ_R4030_REVISION 0xE0000008 /* same as PICA_ASIC_REVISION */ +#define JAZZ_R4030_INV_ADDR 0xE0000010 /* Invalid Address register */ + +#define JAZZ_R4030_TRSTBL_BASE 0xE0000018 /* Translation Table Base */ +#define JAZZ_R4030_TRSTBL_LIM 0xE0000020 /* Translation Table Limit */ +#define JAZZ_R4030_TRSTBL_INV 0xE0000028 /* Translation Table Invalidate */ + +#define JAZZ_R4030_CACHE_MTNC 0xE0000030 /* Cache Maintenance */ +#define JAZZ_R4030_R_FAIL_ADDR 0xE0000038 /* Remote Failed Address */ +#define JAZZ_R4030_M_FAIL_ADDR 0xE0000040 /* Memory Failed Address */ + +#define JAZZ_R4030_CACHE_PTAG 0xE0000048 /* I/O Cache Physical Tag */ +#define JAZZ_R4030_CACHE_LTAG 0xE0000050 /* I/O Cache Logical Tag */ +#define JAZZ_R4030_CACHE_BMASK 0xE0000058 /* I/O Cache Byte Mask */ +#define JAZZ_R4030_CACHE_BWIN 0xE0000060 /* I/O Cache Buffer Window */ + +/* + * Remote Speed Registers. + * + * 0: free, 1: Ethernet, 2: SCSI, 3: Floppy, + * 4: RTC, 5: Kb./Mouse 6: serial 1, 7: serial 2, + * 8: parallel, 9: NVRAM, 10: CPU, 11: PROM, + * 12: reserved, 13: free, 14: 7seg LED, 15: ??? + */ +#define JAZZ_R4030_REM_SPEED 0xE0000070 /* 16 Remote Speed Registers */ + /* 0xE0000070,78,80... 0xE00000E8 */ +#define JAZZ_R4030_IRQ_ENABLE 0xE00000E8 /* Internal Interrupt Enable */ +#define JAZZ_R4030_INVAL_ADDR 0xE0000010 /* Invalid address Register */ +#define JAZZ_R4030_IRQ_SOURCE 0xE0000200 /* Interrupt Source Register */ +#define JAZZ_R4030_I386_ERROR 0xE0000208 /* i386/EISA Bus Error */ + +/* + * Virtual (E)ISA controller address + */ +#define JAZZ_EISA_IRQ_ACK 0xE0000238 /* EISA interrupt acknowledge */ + +/* + * Access the R4030 DMA and I/O Controller + */ +#ifndef __ASSEMBLY__ + +static inline void r4030_delay(void) +{ +__asm__ __volatile__( + ".set\tnoreorder\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + ".set\treorder"); +} + +static inline unsigned short r4030_read_reg16(unsigned long addr) +{ + unsigned short ret = *((volatile unsigned short *)addr); + r4030_delay(); + return ret; +} + +static inline unsigned int r4030_read_reg32(unsigned long addr) +{ + unsigned int ret = *((volatile unsigned int *)addr); + r4030_delay(); + return ret; +} + +static inline void r4030_write_reg16(unsigned long addr, unsigned val) +{ + *((volatile unsigned short *)addr) = val; + r4030_delay(); +} + +static inline void r4030_write_reg32(unsigned long addr, unsigned val) +{ + *((volatile unsigned int *)addr) = val; + r4030_delay(); +} + +#endif /* !__ASSEMBLY__ */ + +#define JAZZ_FDC_BASE 0xe0003000 +#define JAZZ_RTC_BASE 0xe0004000 +#define JAZZ_PORT_BASE 0xe2000000 + +#define JAZZ_EISA_BASE 0xe3000000 + +#endif /* __ASM_JAZZ_H */ diff --git a/arch/mips/include/asm/jazzdma.h b/arch/mips/include/asm/jazzdma.h new file mode 100644 index 000000000000..8bb37bba68f0 --- /dev/null +++ b/arch/mips/include/asm/jazzdma.h @@ -0,0 +1,95 @@ +/* + * Helpfile for jazzdma.c -- Mips Jazz R4030 DMA controller support + */ +#ifndef _ASM_JAZZDMA_H +#define _ASM_JAZZDMA_H + +/* + * Prototypes and macros + */ +extern unsigned long vdma_alloc(unsigned long paddr, unsigned long size); +extern int vdma_free(unsigned long laddr); +extern int vdma_remap(unsigned long laddr, unsigned long paddr, + unsigned long size); +extern unsigned long vdma_phys2log(unsigned long paddr); +extern unsigned long vdma_log2phys(unsigned long laddr); +extern void vdma_stats(void); /* for debugging only */ + +extern void vdma_enable(int channel); +extern void vdma_disable(int channel); +extern void vdma_set_mode(int channel, int mode); +extern void vdma_set_addr(int channel, long addr); +extern void vdma_set_count(int channel, int count); +extern int vdma_get_residue(int channel); +extern int vdma_get_enable(int channel); + +/* + * some definitions used by the driver functions + */ +#define VDMA_PAGESIZE 4096 +#define VDMA_PGTBL_ENTRIES 4096 +#define VDMA_PGTBL_SIZE (sizeof(VDMA_PGTBL_ENTRY) * VDMA_PGTBL_ENTRIES) +#define VDMA_PAGE_EMPTY 0xff000000 + +/* + * Macros to get page no. and offset of a given address + * Note that VDMA_PAGE() works for physical addresses only + */ +#define VDMA_PAGE(a) ((unsigned int)(a) >> 12) +#define VDMA_OFFSET(a) ((unsigned int)(a) & (VDMA_PAGESIZE-1)) + +/* + * error code returned by vdma_alloc() + * (See also arch/mips/kernel/jazzdma.c) + */ +#define VDMA_ERROR 0xffffffff + +/* + * VDMA pagetable entry description + */ +typedef volatile struct VDMA_PGTBL_ENTRY { + unsigned int frame; /* physical frame no. */ + unsigned int owner; /* owner of this entry (0=free) */ +} VDMA_PGTBL_ENTRY; + + +/* + * DMA channel control registers + * in the R4030 MCT_ADR chip + */ +#define JAZZ_R4030_CHNL_MODE 0xE0000100 /* 8 DMA Channel Mode Registers, */ + /* 0xE0000100,120,140... */ +#define JAZZ_R4030_CHNL_ENABLE 0xE0000108 /* 8 DMA Channel Enable Regs, */ + /* 0xE0000108,128,148... */ +#define JAZZ_R4030_CHNL_COUNT 0xE0000110 /* 8 DMA Channel Byte Cnt Regs, */ + /* 0xE0000110,130,150... */ +#define JAZZ_R4030_CHNL_ADDR 0xE0000118 /* 8 DMA Channel Address Regs, */ + /* 0xE0000118,138,158... */ + +/* channel enable register bits */ + +#define R4030_CHNL_ENABLE (1<<0) +#define R4030_CHNL_WRITE (1<<1) +#define R4030_TC_INTR (1<<8) +#define R4030_MEM_INTR (1<<9) +#define R4030_ADDR_INTR (1<<10) + +/* + * Channel mode register bits + */ +#define R4030_MODE_ATIME_40 (0) /* device access time on remote bus */ +#define R4030_MODE_ATIME_80 (1) +#define R4030_MODE_ATIME_120 (2) +#define R4030_MODE_ATIME_160 (3) +#define R4030_MODE_ATIME_200 (4) +#define R4030_MODE_ATIME_240 (5) +#define R4030_MODE_ATIME_280 (6) +#define R4030_MODE_ATIME_320 (7) +#define R4030_MODE_WIDTH_8 (1<<3) /* device data bus width */ +#define R4030_MODE_WIDTH_16 (2<<3) +#define R4030_MODE_WIDTH_32 (3<<3) +#define R4030_MODE_INTR_EN (1<<5) +#define R4030_MODE_BURST (1<<6) /* Rev. 2 only */ +#define R4030_MODE_FAST_ACK (1<<7) /* Rev. 2 only */ + +#endif /* _ASM_JAZZDMA_H */ diff --git a/arch/mips/include/asm/kdebug.h b/arch/mips/include/asm/kdebug.h new file mode 100644 index 000000000000..5bf62aafc890 --- /dev/null +++ b/arch/mips/include/asm/kdebug.h @@ -0,0 +1,13 @@ +#ifndef _ASM_MIPS_KDEBUG_H +#define _ASM_MIPS_KDEBUG_H + +#include <linux/notifier.h> + +enum die_val { + DIE_OOPS = 1, + DIE_FP, + DIE_TRAP, + DIE_RI, +}; + +#endif /* _ASM_MIPS_KDEBUG_H */ diff --git a/arch/mips/include/asm/kexec.h b/arch/mips/include/asm/kexec.h new file mode 100644 index 000000000000..4314892aaebb --- /dev/null +++ b/arch/mips/include/asm/kexec.h @@ -0,0 +1,30 @@ +/* + * kexec.h for kexec + * Created by <nschichan@corp.free.fr> on Thu Oct 12 14:59:34 2006 + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#ifndef _MIPS_KEXEC +# define _MIPS_KEXEC + +/* Maximum physical address we can use pages from */ +#define KEXEC_SOURCE_MEMORY_LIMIT (0x20000000) +/* Maximum address we can reach in physical address mode */ +#define KEXEC_DESTINATION_MEMORY_LIMIT (0x20000000) + /* Maximum address we can use for the control code buffer */ +#define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000) + +#define KEXEC_CONTROL_PAGE_SIZE 4096 + +/* The native architecture */ +#define KEXEC_ARCH KEXEC_ARCH_MIPS + +static inline void crash_setup_regs(struct pt_regs *newregs, + struct pt_regs *oldregs) +{ + /* Dummy implementation for now */ +} + +#endif /* !_MIPS_KEXEC */ diff --git a/arch/mips/include/asm/kgdb.h b/arch/mips/include/asm/kgdb.h new file mode 100644 index 000000000000..48223b09396c --- /dev/null +++ b/arch/mips/include/asm/kgdb.h @@ -0,0 +1,44 @@ +#ifndef __ASM_KGDB_H_ +#define __ASM_KGDB_H_ + +#ifdef __KERNEL__ + +#include <asm/sgidefs.h> + +#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS32) + +#define KGDB_GDB_REG_SIZE 32 + +#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS64) + +#ifdef CONFIG_32BIT +#define KGDB_GDB_REG_SIZE 32 +#else /* CONFIG_CPU_32BIT */ +#define KGDB_GDB_REG_SIZE 64 +#endif +#else +#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA" +#endif /* _MIPS_ISA */ + +#define BUFMAX 2048 +#if (KGDB_GDB_REG_SIZE == 32) +#define NUMREGBYTES (90*sizeof(u32)) +#define NUMCRITREGBYTES (12*sizeof(u32)) +#else +#define NUMREGBYTES (90*sizeof(u64)) +#define NUMCRITREGBYTES (12*sizeof(u64)) +#endif +#define BREAK_INSTR_SIZE 4 +#define CACHE_FLUSH_IS_SAFE 0 + +extern void arch_kgdb_breakpoint(void); +extern int kgdb_early_setup; +extern void *saved_vectors[32]; +extern void handle_exception(struct pt_regs *regs); +extern void breakinst(void); + +#endif /* __KERNEL__ */ + +#endif /* __ASM_KGDB_H_ */ diff --git a/arch/mips/include/asm/kmap_types.h b/arch/mips/include/asm/kmap_types.h new file mode 100644 index 000000000000..806aae3c5338 --- /dev/null +++ b/arch/mips/include/asm/kmap_types.h @@ -0,0 +1,30 @@ +#ifndef _ASM_KMAP_TYPES_H +#define _ASM_KMAP_TYPES_H + + +#ifdef CONFIG_DEBUG_HIGHMEM +# define D(n) __KM_FENCE_##n , +#else +# define D(n) +#endif + +enum km_type { +D(0) KM_BOUNCE_READ, +D(1) KM_SKB_SUNRPC_DATA, +D(2) KM_SKB_DATA_SOFTIRQ, +D(3) KM_USER0, +D(4) KM_USER1, +D(5) KM_BIO_SRC_IRQ, +D(6) KM_BIO_DST_IRQ, +D(7) KM_PTE0, +D(8) KM_PTE1, +D(9) KM_IRQ0, +D(10) KM_IRQ1, +D(11) KM_SOFTIRQ0, +D(12) KM_SOFTIRQ1, +D(13) KM_TYPE_NR +}; + +#undef D + +#endif diff --git a/arch/mips/include/asm/kspd.h b/arch/mips/include/asm/kspd.h new file mode 100644 index 000000000000..4e9e724c8935 --- /dev/null +++ b/arch/mips/include/asm/kspd.h @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ + +#ifndef _ASM_KSPD_H +#define _ASM_KSPD_H + +struct kspd_notifications { + void (*kspd_sp_exit)(int sp_id); + + struct list_head list; +}; + +#ifdef CONFIG_MIPS_APSP_KSPD +extern void kspd_notify(struct kspd_notifications *notify); +#else +static inline void kspd_notify(struct kspd_notifications *notify) +{ +} +#endif + +#endif diff --git a/arch/mips/include/asm/lasat/ds1603.h b/arch/mips/include/asm/lasat/ds1603.h new file mode 100644 index 000000000000..edcd7544b358 --- /dev/null +++ b/arch/mips/include/asm/lasat/ds1603.h @@ -0,0 +1,18 @@ +#include <asm/addrspace.h> + +/* Lasat 100 */ +#define DS1603_REG_100 (KSEG1ADDR(0x1c810000)) +#define DS1603_RST_100 (1 << 2) +#define DS1603_CLK_100 (1 << 0) +#define DS1603_DATA_SHIFT_100 1 +#define DS1603_DATA_100 (1 << DS1603_DATA_SHIFT_100) + +/* Lasat 200 */ +#define DS1603_REG_200 (KSEG1ADDR(0x11000000)) +#define DS1603_RST_200 (1 << 3) +#define DS1603_CLK_200 (1 << 4) +#define DS1603_DATA_200 (1 << 5) + +#define DS1603_DATA_REG_200 (DS1603_REG_200 + 0x10000) +#define DS1603_DATA_READ_SHIFT_200 9 +#define DS1603_DATA_READ_200 (1 << DS1603_DATA_READ_SHIFT_200) diff --git a/arch/mips/include/asm/lasat/eeprom.h b/arch/mips/include/asm/lasat/eeprom.h new file mode 100644 index 000000000000..3dac203697fa --- /dev/null +++ b/arch/mips/include/asm/lasat/eeprom.h @@ -0,0 +1,17 @@ +#include <asm/addrspace.h> + +/* lasat 100 */ +#define AT93C_REG_100 KSEG1ADDR(0x1c810000) +#define AT93C_RDATA_REG_100 AT93C_REG_100 +#define AT93C_RDATA_SHIFT_100 4 +#define AT93C_WDATA_SHIFT_100 4 +#define AT93C_CS_M_100 (1 << 5) +#define AT93C_CLK_M_100 (1 << 3) + +/* lasat 200 */ +#define AT93C_REG_200 KSEG1ADDR(0x11000000) +#define AT93C_RDATA_REG_200 (AT93C_REG_200+0x10000) +#define AT93C_RDATA_SHIFT_200 8 +#define AT93C_WDATA_SHIFT_200 2 +#define AT93C_CS_M_200 (1 << 0) +#define AT93C_CLK_M_200 (1 << 1) diff --git a/arch/mips/include/asm/lasat/head.h b/arch/mips/include/asm/lasat/head.h new file mode 100644 index 000000000000..f5589f31a197 --- /dev/null +++ b/arch/mips/include/asm/lasat/head.h @@ -0,0 +1,22 @@ +/* + * Image header stuff + */ +#ifndef _HEAD_H +#define _HEAD_H + +#define LASAT_K_MAGIC0_VAL 0xfedeabba +#define LASAT_K_MAGIC1_VAL 0x00bedead + +#ifndef _LANGUAGE_ASSEMBLY +#include <linux/types.h> +struct bootloader_header { + u32 magic[2]; + u32 version; + u32 image_start; + u32 image_size; + u32 kernel_start; + u32 kernel_entry; +}; +#endif + +#endif /* _HEAD_H */ diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h new file mode 100644 index 000000000000..caeba1e302a2 --- /dev/null +++ b/arch/mips/include/asm/lasat/lasat.h @@ -0,0 +1,258 @@ +/* + * lasat.h + * + * Thomas Horsten <thh@lasat.com> + * Copyright (C) 2000 LASAT Networks A/S. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Configuration for LASAT boards, loads the appropriate include files. + */ +#ifndef _LASAT_H +#define _LASAT_H + +#ifndef _LANGUAGE_ASSEMBLY + +extern struct lasat_misc { + volatile u32 *reset_reg; + volatile u32 *flash_wp_reg; + u32 flash_wp_bit; +} *lasat_misc; + +enum lasat_mtdparts { + LASAT_MTD_BOOTLOADER, + LASAT_MTD_SERVICE, + LASAT_MTD_NORMAL, + LASAT_MTD_CONFIG, + LASAT_MTD_FS, + LASAT_MTD_LAST +}; + +/* + * The format of the data record in the EEPROM. + * See Documentation/LASAT/eeprom.txt for a detailed description + * of the fields in this struct, and the LASAT Hardware Configuration + * field specification for a detailed description of the config + * field. + */ +#include <linux/types.h> + +#define LASAT_EEPROM_VERSION 7 +struct lasat_eeprom_struct { + unsigned int version; + unsigned int cfg[3]; + unsigned char hwaddr[6]; + unsigned char print_partno[12]; + unsigned char term0; + unsigned char print_serial[14]; + unsigned char term1; + unsigned char prod_partno[12]; + unsigned char term2; + unsigned char prod_serial[14]; + unsigned char term3; + unsigned char passwd_hash[16]; + unsigned char pwdnull; + unsigned char vendid; + unsigned char ts_ref; + unsigned char ts_signoff; + unsigned char reserved[11]; + unsigned char debugaccess; + unsigned short prid; + unsigned int serviceflag; + unsigned int ipaddr; + unsigned int netmask; + unsigned int crc32; +}; + +struct lasat_eeprom_struct_pre7 { + unsigned int version; + unsigned int flags[3]; + unsigned char hwaddr0[6]; + unsigned char hwaddr1[6]; + unsigned char print_partno[9]; + unsigned char term0; + unsigned char print_serial[14]; + unsigned char term1; + unsigned char prod_partno[9]; + unsigned char term2; + unsigned char prod_serial[14]; + unsigned char term3; + unsigned char passwd_hash[24]; + unsigned char pwdnull; + unsigned char vendor; + unsigned char ts_ref; + unsigned char ts_signoff; + unsigned char reserved[6]; + unsigned int writecount; + unsigned int ipaddr; + unsigned int netmask; + unsigned int crc32; +}; + +/* Configuration descriptor encoding - see the doc for details */ + +#define LASAT_W0_DSCTYPE(v) (((v)) & 0xf) +#define LASAT_W0_BMID(v) (((v) >> 0x04) & 0xf) +#define LASAT_W0_CPUTYPE(v) (((v) >> 0x08) & 0xf) +#define LASAT_W0_BUSSPEED(v) (((v) >> 0x0c) & 0xf) +#define LASAT_W0_CPUCLK(v) (((v) >> 0x10) & 0xf) +#define LASAT_W0_SDRAMBANKSZ(v) (((v) >> 0x14) & 0xf) +#define LASAT_W0_SDRAMBANKS(v) (((v) >> 0x18) & 0xf) +#define LASAT_W0_L2CACHE(v) (((v) >> 0x1c) & 0xf) + +#define LASAT_W1_EDHAC(v) (((v)) & 0xf) +#define LASAT_W1_HIFN(v) (((v) >> 0x04) & 0x1) +#define LASAT_W1_ISDN(v) (((v) >> 0x05) & 0x1) +#define LASAT_W1_IDE(v) (((v) >> 0x06) & 0x1) +#define LASAT_W1_HDLC(v) (((v) >> 0x07) & 0x1) +#define LASAT_W1_USVERSION(v) (((v) >> 0x08) & 0x1) +#define LASAT_W1_4MACS(v) (((v) >> 0x09) & 0x1) +#define LASAT_W1_EXTSERIAL(v) (((v) >> 0x0a) & 0x1) +#define LASAT_W1_FLASHSIZE(v) (((v) >> 0x0c) & 0xf) +#define LASAT_W1_PCISLOTS(v) (((v) >> 0x10) & 0xf) +#define LASAT_W1_PCI1OPT(v) (((v) >> 0x14) & 0xf) +#define LASAT_W1_PCI2OPT(v) (((v) >> 0x18) & 0xf) +#define LASAT_W1_PCI3OPT(v) (((v) >> 0x1c) & 0xf) + +/* Routines specific to LASAT boards */ + +#define LASAT_BMID_MASQUERADE2 0 +#define LASAT_BMID_MASQUERADEPRO 1 +#define LASAT_BMID_SAFEPIPE25 2 +#define LASAT_BMID_SAFEPIPE50 3 +#define LASAT_BMID_SAFEPIPE100 4 +#define LASAT_BMID_SAFEPIPE5000 5 +#define LASAT_BMID_SAFEPIPE7000 6 +#define LASAT_BMID_SAFEPIPE1000 7 +#if 0 +#define LASAT_BMID_SAFEPIPE30 7 +#define LASAT_BMID_SAFEPIPE5100 8 +#define LASAT_BMID_SAFEPIPE7100 9 +#endif +#define LASAT_BMID_UNKNOWN 0xf +#define LASAT_MAX_BMID_NAMES 9 /* no larger than 15! */ + +#define LASAT_HAS_EDHAC (1 << 0) +#define LASAT_EDHAC_FAST (1 << 1) +#define LASAT_HAS_EADI (1 << 2) +#define LASAT_HAS_HIFN (1 << 3) +#define LASAT_HAS_ISDN (1 << 4) +#define LASAT_HAS_LEASEDLINE_IF (1 << 5) +#define LASAT_HAS_HDC (1 << 6) + +#define LASAT_PRID_MASQUERADE2 0 +#define LASAT_PRID_MASQUERADEPRO 1 +#define LASAT_PRID_SAFEPIPE25 2 +#define LASAT_PRID_SAFEPIPE50 3 +#define LASAT_PRID_SAFEPIPE100 4 +#define LASAT_PRID_SAFEPIPE5000 5 +#define LASAT_PRID_SAFEPIPE7000 6 +#define LASAT_PRID_SAFEPIPE30 7 +#define LASAT_PRID_SAFEPIPE5100 8 +#define LASAT_PRID_SAFEPIPE7100 9 + +#define LASAT_PRID_SAFEPIPE1110 10 +#define LASAT_PRID_SAFEPIPE3020 11 +#define LASAT_PRID_SAFEPIPE3030 12 +#define LASAT_PRID_SAFEPIPE5020 13 +#define LASAT_PRID_SAFEPIPE5030 14 +#define LASAT_PRID_SAFEPIPE1120 15 +#define LASAT_PRID_SAFEPIPE1130 16 +#define LASAT_PRID_SAFEPIPE6010 17 +#define LASAT_PRID_SAFEPIPE6110 18 +#define LASAT_PRID_SAFEPIPE6210 19 +#define LASAT_PRID_SAFEPIPE1020 20 +#define LASAT_PRID_SAFEPIPE1040 21 +#define LASAT_PRID_SAFEPIPE1060 22 + +struct lasat_info { + unsigned int li_cpu_hz; + unsigned int li_bus_hz; + unsigned int li_bmid; + unsigned int li_memsize; + unsigned int li_flash_size; + unsigned int li_prid; + unsigned char li_bmstr[16]; + unsigned char li_namestr[32]; + unsigned char li_typestr[16]; + /* Info on the Flash layout */ + unsigned int li_flash_base; + unsigned long li_flashpart_base[LASAT_MTD_LAST]; + unsigned long li_flashpart_size[LASAT_MTD_LAST]; + struct lasat_eeprom_struct li_eeprom_info; + unsigned int li_eeprom_upgrade_version; + unsigned int li_debugaccess; +}; + +extern struct lasat_info lasat_board_info; + +static inline unsigned long lasat_flash_partition_start(int partno) +{ + if (partno < 0 || partno >= LASAT_MTD_LAST) + return 0; + + return lasat_board_info.li_flashpart_base[partno]; +} + +static inline unsigned long lasat_flash_partition_size(int partno) +{ + if (partno < 0 || partno >= LASAT_MTD_LAST) + return 0; + + return lasat_board_info.li_flashpart_size[partno]; +} + +/* Called from setup() to initialize the global board_info struct */ +extern int lasat_init_board_info(void); + +/* Write the modified EEPROM info struct */ +extern void lasat_write_eeprom_info(void); + +#define N_MACHTYPES 2 +/* for calibration of delays */ + +/* the lasat_ndelay function is necessary because it is used at an + * early stage of the boot process where ndelay is not calibrated. + * It is used for the bit-banging rtc and eeprom drivers */ + +#include <linux/delay.h> + +/* calculating with the slowest board with 100 MHz clock */ +#define LASAT_100_DIVIDER 20 +/* All 200's run at 250 MHz clock */ +#define LASAT_200_DIVIDER 8 + +extern unsigned int lasat_ndelay_divider; + +static inline void lasat_ndelay(unsigned int ns) +{ + __delay(ns / lasat_ndelay_divider); +} + +#define IS_LASAT_200() (current_cpu_data.cputype == CPU_R5000) + +#endif /* !defined (_LANGUAGE_ASSEMBLY) */ + +#define LASAT_SERVICEMODE_MAGIC_1 0xdeadbeef +#define LASAT_SERVICEMODE_MAGIC_2 0xfedeabba + +/* Lasat 100 boards */ +#define LASAT_GT_BASE (KSEG1ADDR(0x14000000)) + +/* Lasat 200 boards */ +#define Vrc5074_PHYS_BASE 0x1fa00000 +#define Vrc5074_BASE (KSEG1ADDR(Vrc5074_PHYS_BASE)) +#define PCI_WINDOW1 0x1a000000 + +#endif /* _LASAT_H */ diff --git a/arch/mips/include/asm/lasat/lasatint.h b/arch/mips/include/asm/lasat/lasatint.h new file mode 100644 index 000000000000..e0d2458b43d0 --- /dev/null +++ b/arch/mips/include/asm/lasat/lasatint.h @@ -0,0 +1,14 @@ +#ifndef __ASM_LASAT_LASATINT_H +#define __ASM_LASAT_LASATINT_H + +/* lasat 100 */ +#define LASAT_INT_STATUS_REG_100 (KSEG1ADDR(0x1c880000)) +#define LASAT_INT_MASK_REG_100 (KSEG1ADDR(0x1c890000)) +#define LASATINT_MASK_SHIFT_100 0 + +/* lasat 200 */ +#define LASAT_INT_STATUS_REG_200 (KSEG1ADDR(0x1104003c)) +#define LASAT_INT_MASK_REG_200 (KSEG1ADDR(0x1104003c)) +#define LASATINT_MASK_SHIFT_200 16 + +#endif /* __ASM_LASAT_LASATINT_H */ diff --git a/arch/mips/include/asm/lasat/picvue.h b/arch/mips/include/asm/lasat/picvue.h new file mode 100644 index 000000000000..42a492edc40e --- /dev/null +++ b/arch/mips/include/asm/lasat/picvue.h @@ -0,0 +1,15 @@ +/* Lasat 100 */ +#define PVC_REG_100 KSEG1ADDR(0x1c820000) +#define PVC_DATA_SHIFT_100 0 +#define PVC_DATA_M_100 0xFF +#define PVC_E_100 (1 << 8) +#define PVC_RW_100 (1 << 9) +#define PVC_RS_100 (1 << 10) + +/* Lasat 200 */ +#define PVC_REG_200 KSEG1ADDR(0x11000000) +#define PVC_DATA_SHIFT_200 24 +#define PVC_DATA_M_200 (0xFF << PVC_DATA_SHIFT_200) +#define PVC_E_200 (1 << 16) +#define PVC_RW_200 (1 << 17) +#define PVC_RS_200 (1 << 18) diff --git a/arch/mips/include/asm/lasat/serial.h b/arch/mips/include/asm/lasat/serial.h new file mode 100644 index 000000000000..1c37d70579b8 --- /dev/null +++ b/arch/mips/include/asm/lasat/serial.h @@ -0,0 +1,13 @@ +#include <asm/lasat/lasat.h> + +/* Lasat 100 boards serial configuration */ +#define LASAT_BASE_BAUD_100 (7372800 / 16) +#define LASAT_UART_REGS_BASE_100 0x1c8b0000 +#define LASAT_UART_REGS_SHIFT_100 2 +#define LASATINT_UART_100 16 + +/* * LASAT 200 boards serial configuration */ +#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12) +#define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300) +#define LASAT_UART_REGS_SHIFT_200 3 +#define LASATINT_UART_200 21 diff --git a/arch/mips/include/asm/linkage.h b/arch/mips/include/asm/linkage.h new file mode 100644 index 000000000000..e9a940d1b0c6 --- /dev/null +++ b/arch/mips/include/asm/linkage.h @@ -0,0 +1,10 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#ifdef __ASSEMBLY__ +#include <asm/asm.h> +#endif + +#define __weak __attribute__((weak)) + +#endif diff --git a/arch/mips/include/asm/local.h b/arch/mips/include/asm/local.h new file mode 100644 index 000000000000..f96fd59e0845 --- /dev/null +++ b/arch/mips/include/asm/local.h @@ -0,0 +1,221 @@ +#ifndef _ARCH_MIPS_LOCAL_H +#define _ARCH_MIPS_LOCAL_H + +#include <linux/percpu.h> +#include <linux/bitops.h> +#include <asm/atomic.h> +#include <asm/cmpxchg.h> +#include <asm/war.h> + +typedef struct +{ + atomic_long_t a; +} local_t; + +#define LOCAL_INIT(i) { ATOMIC_LONG_INIT(i) } + +#define local_read(l) atomic_long_read(&(l)->a) +#define local_set(l, i) atomic_long_set(&(l)->a, (i)) + +#define local_add(i, l) atomic_long_add((i), (&(l)->a)) +#define local_sub(i, l) atomic_long_sub((i), (&(l)->a)) +#define local_inc(l) atomic_long_inc(&(l)->a) +#define local_dec(l) atomic_long_dec(&(l)->a) + +/* + * Same as above, but return the result value + */ +static __inline__ long local_add_return(long i, local_t * l) +{ + unsigned long result; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1:" __LL "%1, %2 # local_add_return \n" + " addu %0, %1, %3 \n" + __SC "%0, %2 \n" + " beqzl %0, 1b \n" + " addu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (l->a.counter) + : "Ir" (i), "m" (l->a.counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1:" __LL "%1, %2 # local_add_return \n" + " addu %0, %1, %3 \n" + __SC "%0, %2 \n" + " beqz %0, 1b \n" + " addu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (l->a.counter) + : "Ir" (i), "m" (l->a.counter) + : "memory"); + } else { + unsigned long flags; + + local_irq_save(flags); + result = l->a.counter; + result += i; + l->a.counter = result; + local_irq_restore(flags); + } + + return result; +} + +static __inline__ long local_sub_return(long i, local_t * l) +{ + unsigned long result; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1:" __LL "%1, %2 # local_sub_return \n" + " subu %0, %1, %3 \n" + __SC "%0, %2 \n" + " beqzl %0, 1b \n" + " subu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (l->a.counter) + : "Ir" (i), "m" (l->a.counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1:" __LL "%1, %2 # local_sub_return \n" + " subu %0, %1, %3 \n" + __SC "%0, %2 \n" + " beqz %0, 1b \n" + " subu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (l->a.counter) + : "Ir" (i), "m" (l->a.counter) + : "memory"); + } else { + unsigned long flags; + + local_irq_save(flags); + result = l->a.counter; + result -= i; + l->a.counter = result; + local_irq_restore(flags); + } + + return result; +} + +#define local_cmpxchg(l, o, n) \ + ((long)cmpxchg_local(&((l)->a.counter), (o), (n))) +#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n))) + +/** + * local_add_unless - add unless the number is a given value + * @l: pointer of type local_t + * @a: the amount to add to l... + * @u: ...unless l is equal to u. + * + * Atomically adds @a to @l, so long as it was not @u. + * Returns non-zero if @l was not @u, and zero otherwise. + */ +#define local_add_unless(l, a, u) \ +({ \ + long c, old; \ + c = local_read(l); \ + while (c != (u) && (old = local_cmpxchg((l), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define local_inc_not_zero(l) local_add_unless((l), 1, 0) + +#define local_dec_return(l) local_sub_return(1, (l)) +#define local_inc_return(l) local_add_return(1, (l)) + +/* + * local_sub_and_test - subtract value from variable and test result + * @i: integer value to subtract + * @l: pointer of type local_t + * + * Atomically subtracts @i from @l and returns + * true if the result is zero, or false for all + * other cases. + */ +#define local_sub_and_test(i, l) (local_sub_return((i), (l)) == 0) + +/* + * local_inc_and_test - increment and test + * @l: pointer of type local_t + * + * Atomically increments @l by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define local_inc_and_test(l) (local_inc_return(l) == 0) + +/* + * local_dec_and_test - decrement by 1 and test + * @l: pointer of type local_t + * + * Atomically decrements @l by 1 and + * returns true if the result is 0, or false for all other + * cases. + */ +#define local_dec_and_test(l) (local_sub_return(1, (l)) == 0) + +/* + * local_add_negative - add and test if negative + * @l: pointer of type local_t + * @i: integer value to add + * + * Atomically adds @i to @l and returns true + * if the result is negative, or false when + * result is greater than or equal to zero. + */ +#define local_add_negative(i, l) (local_add_return(i, (l)) < 0) + +/* Use these for per-cpu local_t variables: on some archs they are + * much more efficient than these naive implementations. Note they take + * a variable, not an address. + */ + +#define __local_inc(l) ((l)->a.counter++) +#define __local_dec(l) ((l)->a.counter++) +#define __local_add(i, l) ((l)->a.counter+=(i)) +#define __local_sub(i, l) ((l)->a.counter-=(i)) + +/* Need to disable preemption for the cpu local counters otherwise we could + still access a variable of a previous CPU in a non atomic way. */ +#define cpu_local_wrap_v(l) \ + ({ local_t res__; \ + preempt_disable(); \ + res__ = (l); \ + preempt_enable(); \ + res__; }) +#define cpu_local_wrap(l) \ + ({ preempt_disable(); \ + l; \ + preempt_enable(); }) \ + +#define cpu_local_read(l) cpu_local_wrap_v(local_read(&__get_cpu_var(l))) +#define cpu_local_set(l, i) cpu_local_wrap(local_set(&__get_cpu_var(l), (i))) +#define cpu_local_inc(l) cpu_local_wrap(local_inc(&__get_cpu_var(l))) +#define cpu_local_dec(l) cpu_local_wrap(local_dec(&__get_cpu_var(l))) +#define cpu_local_add(i, l) cpu_local_wrap(local_add((i), &__get_cpu_var(l))) +#define cpu_local_sub(i, l) cpu_local_wrap(local_sub((i), &__get_cpu_var(l))) + +#define __cpu_local_inc(l) cpu_local_inc(l) +#define __cpu_local_dec(l) cpu_local_dec(l) +#define __cpu_local_add(i, l) cpu_local_add((i), (l)) +#define __cpu_local_sub(i, l) cpu_local_sub((i), (l)) + +#endif /* _ARCH_MIPS_LOCAL_H */ diff --git a/arch/mips/include/asm/m48t35.h b/arch/mips/include/asm/m48t35.h new file mode 100644 index 000000000000..f44852e9a96d --- /dev/null +++ b/arch/mips/include/asm/m48t35.h @@ -0,0 +1,27 @@ +/* + * Registers for the SGS-Thomson M48T35 Timekeeper RAM chip + */ +#ifndef _ASM_M48T35_H +#define _ASM_M48T35_H + +#include <linux/spinlock.h> + +extern spinlock_t rtc_lock; + +struct m48t35_rtc { + volatile u8 pad[0x7ff8]; /* starts at 0x7ff8 */ + volatile u8 control; + volatile u8 sec; + volatile u8 min; + volatile u8 hour; + volatile u8 day; + volatile u8 date; + volatile u8 month; + volatile u8 year; +}; + +#define M48T35_RTC_SET 0x80 +#define M48T35_RTC_STOPPED 0x80 +#define M48T35_RTC_READ 0x40 + +#endif /* _ASM_M48T35_H */ diff --git a/arch/mips/include/asm/m48t37.h b/arch/mips/include/asm/m48t37.h new file mode 100644 index 000000000000..cabf86264f36 --- /dev/null +++ b/arch/mips/include/asm/m48t37.h @@ -0,0 +1,35 @@ +/* + * Registers for the SGS-Thomson M48T37 Timekeeper RAM chip + */ +#ifndef _ASM_M48T37_H +#define _ASM_M48T37_H + +#include <linux/spinlock.h> + +extern spinlock_t rtc_lock; + +struct m48t37_rtc { + volatile u8 pad[0x7ff0]; /* NVRAM */ + volatile u8 flags; + volatile u8 century; + volatile u8 alarm_sec; + volatile u8 alarm_min; + volatile u8 alarm_hour; + volatile u8 alarm_data; + volatile u8 interrupts; + volatile u8 watchdog; + volatile u8 control; + volatile u8 sec; + volatile u8 min; + volatile u8 hour; + volatile u8 day; + volatile u8 date; + volatile u8 month; + volatile u8 year; +}; + +#define M48T37_RTC_SET 0x80 +#define M48T37_RTC_STOPPED 0x80 +#define M48T37_RTC_READ 0x40 + +#endif /* _ASM_M48T37_H */ diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h new file mode 100644 index 000000000000..0d302bad4492 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -0,0 +1,1772 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Include file for Alchemy Semiconductor's Au1k CPU. + * + * Copyright 2000-2001, 2006-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + /* + * some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp + */ + +#ifndef _AU1000_H_ +#define _AU1000_H_ + + +#ifndef _LANGUAGE_ASSEMBLY + +#include <linux/delay.h> +#include <linux/types.h> + +#include <linux/io.h> +#include <linux/irq.h> + +/* cpu pipeline flush */ +void static inline au_sync(void) +{ + __asm__ volatile ("sync"); +} + +void static inline au_sync_udelay(int us) +{ + __asm__ volatile ("sync"); + udelay(us); +} + +void static inline au_sync_delay(int ms) +{ + __asm__ volatile ("sync"); + mdelay(ms); +} + +void static inline au_writeb(u8 val, unsigned long reg) +{ + *(volatile u8 *)reg = val; +} + +void static inline au_writew(u16 val, unsigned long reg) +{ + *(volatile u16 *)reg = val; +} + +void static inline au_writel(u32 val, unsigned long reg) +{ + *(volatile u32 *)reg = val; +} + +static inline u8 au_readb(unsigned long reg) +{ + return *(volatile u8 *)reg; +} + +static inline u16 au_readw(unsigned long reg) +{ + return *(volatile u16 *)reg; +} + +static inline u32 au_readl(unsigned long reg) +{ + return *(volatile u32 *)reg; +} + + +/* arch/mips/au1000/common/clocks.c */ +extern void set_au1x00_speed(unsigned int new_freq); +extern unsigned int get_au1x00_speed(void); +extern void set_au1x00_uart_baud_base(unsigned long new_baud_base); +extern unsigned long get_au1x00_uart_baud_base(void); +extern void set_au1x00_lcd_clock(void); +extern unsigned int get_au1x00_lcd_clock(void); + +/* + * Every board describes its IRQ mapping with this table. + */ +struct au1xxx_irqmap { + int im_irq; + int im_type; + int im_request; +}; + +/* + * init_IRQ looks for a table with this name. + */ +extern struct au1xxx_irqmap au1xxx_irq_map[]; + +#endif /* !defined (_LANGUAGE_ASSEMBLY) */ + +/* + * SDRAM register offsets + */ +#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \ + defined(CONFIG_SOC_AU1100) +#define MEM_SDMODE0 0x0000 +#define MEM_SDMODE1 0x0004 +#define MEM_SDMODE2 0x0008 +#define MEM_SDADDR0 0x000C +#define MEM_SDADDR1 0x0010 +#define MEM_SDADDR2 0x0014 +#define MEM_SDREFCFG 0x0018 +#define MEM_SDPRECMD 0x001C +#define MEM_SDAUTOREF 0x0020 +#define MEM_SDWRMD0 0x0024 +#define MEM_SDWRMD1 0x0028 +#define MEM_SDWRMD2 0x002C +#define MEM_SDSLEEP 0x0030 +#define MEM_SDSMCKE 0x0034 + +/* + * MEM_SDMODE register content definitions + */ +#define MEM_SDMODE_F (1 << 22) +#define MEM_SDMODE_SR (1 << 21) +#define MEM_SDMODE_BS (1 << 20) +#define MEM_SDMODE_RS (3 << 18) +#define MEM_SDMODE_CS (7 << 15) +#define MEM_SDMODE_TRAS (15 << 11) +#define MEM_SDMODE_TMRD (3 << 9) +#define MEM_SDMODE_TWR (3 << 7) +#define MEM_SDMODE_TRP (3 << 5) +#define MEM_SDMODE_TRCD (3 << 3) +#define MEM_SDMODE_TCL (7 << 0) + +#define MEM_SDMODE_BS_2Bank (0 << 20) +#define MEM_SDMODE_BS_4Bank (1 << 20) +#define MEM_SDMODE_RS_11Row (0 << 18) +#define MEM_SDMODE_RS_12Row (1 << 18) +#define MEM_SDMODE_RS_13Row (2 << 18) +#define MEM_SDMODE_RS_N(N) ((N) << 18) +#define MEM_SDMODE_CS_7Col (0 << 15) +#define MEM_SDMODE_CS_8Col (1 << 15) +#define MEM_SDMODE_CS_9Col (2 << 15) +#define MEM_SDMODE_CS_10Col (3 << 15) +#define MEM_SDMODE_CS_11Col (4 << 15) +#define MEM_SDMODE_CS_N(N) ((N) << 15) +#define MEM_SDMODE_TRAS_N(N) ((N) << 11) +#define MEM_SDMODE_TMRD_N(N) ((N) << 9) +#define MEM_SDMODE_TWR_N(N) ((N) << 7) +#define MEM_SDMODE_TRP_N(N) ((N) << 5) +#define MEM_SDMODE_TRCD_N(N) ((N) << 3) +#define MEM_SDMODE_TCL_N(N) ((N) << 0) + +/* + * MEM_SDADDR register contents definitions + */ +#define MEM_SDADDR_E (1 << 20) +#define MEM_SDADDR_CSBA (0x03FF << 10) +#define MEM_SDADDR_CSMASK (0x03FF << 0) +#define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12) +#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22) + +/* + * MEM_SDREFCFG register content definitions + */ +#define MEM_SDREFCFG_TRC (15 << 28) +#define MEM_SDREFCFG_TRPM (3 << 26) +#define MEM_SDREFCFG_E (1 << 25) +#define MEM_SDREFCFG_RE (0x1ffffff << 0) +#define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC) +#define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM) +#define MEM_SDREFCFG_REF_N(N) (N) +#endif + +/***********************************************************************/ + +/* + * Au1550 SDRAM Register Offsets + */ + +/***********************************************************************/ + +#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) +#define MEM_SDMODE0 0x0800 +#define MEM_SDMODE1 0x0808 +#define MEM_SDMODE2 0x0810 +#define MEM_SDADDR0 0x0820 +#define MEM_SDADDR1 0x0828 +#define MEM_SDADDR2 0x0830 +#define MEM_SDCONFIGA 0x0840 +#define MEM_SDCONFIGB 0x0848 +#define MEM_SDSTAT 0x0850 +#define MEM_SDERRADDR 0x0858 +#define MEM_SDSTRIDE0 0x0860 +#define MEM_SDSTRIDE1 0x0868 +#define MEM_SDSTRIDE2 0x0870 +#define MEM_SDWRMD0 0x0880 +#define MEM_SDWRMD1 0x0888 +#define MEM_SDWRMD2 0x0890 +#define MEM_SDPRECMD 0x08C0 +#define MEM_SDAUTOREF 0x08C8 +#define MEM_SDSREF 0x08D0 +#define MEM_SDSLEEP MEM_SDSREF + +#endif + +/* + * Physical base addresses for integrated peripherals + */ + +#ifdef CONFIG_SOC_AU1000 +#define MEM_PHYS_ADDR 0x14000000 +#define STATIC_MEM_PHYS_ADDR 0x14001000 +#define DMA0_PHYS_ADDR 0x14002000 +#define DMA1_PHYS_ADDR 0x14002100 +#define DMA2_PHYS_ADDR 0x14002200 +#define DMA3_PHYS_ADDR 0x14002300 +#define DMA4_PHYS_ADDR 0x14002400 +#define DMA5_PHYS_ADDR 0x14002500 +#define DMA6_PHYS_ADDR 0x14002600 +#define DMA7_PHYS_ADDR 0x14002700 +#define IC0_PHYS_ADDR 0x10400000 +#define IC1_PHYS_ADDR 0x11800000 +#define AC97_PHYS_ADDR 0x10000000 +#define USBH_PHYS_ADDR 0x10100000 +#define USBD_PHYS_ADDR 0x10200000 +#define IRDA_PHYS_ADDR 0x10300000 +#define MAC0_PHYS_ADDR 0x10500000 +#define MAC1_PHYS_ADDR 0x10510000 +#define MACEN_PHYS_ADDR 0x10520000 +#define MACDMA0_PHYS_ADDR 0x14004000 +#define MACDMA1_PHYS_ADDR 0x14004200 +#define I2S_PHYS_ADDR 0x11000000 +#define UART0_PHYS_ADDR 0x11100000 +#define UART1_PHYS_ADDR 0x11200000 +#define UART2_PHYS_ADDR 0x11300000 +#define UART3_PHYS_ADDR 0x11400000 +#define SSI0_PHYS_ADDR 0x11600000 +#define SSI1_PHYS_ADDR 0x11680000 +#define SYS_PHYS_ADDR 0x11900000 +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#endif + +/********************************************************************/ + +#ifdef CONFIG_SOC_AU1500 +#define MEM_PHYS_ADDR 0x14000000 +#define STATIC_MEM_PHYS_ADDR 0x14001000 +#define DMA0_PHYS_ADDR 0x14002000 +#define DMA1_PHYS_ADDR 0x14002100 +#define DMA2_PHYS_ADDR 0x14002200 +#define DMA3_PHYS_ADDR 0x14002300 +#define DMA4_PHYS_ADDR 0x14002400 +#define DMA5_PHYS_ADDR 0x14002500 +#define DMA6_PHYS_ADDR 0x14002600 +#define DMA7_PHYS_ADDR 0x14002700 +#define IC0_PHYS_ADDR 0x10400000 +#define IC1_PHYS_ADDR 0x11800000 +#define AC97_PHYS_ADDR 0x10000000 +#define USBH_PHYS_ADDR 0x10100000 +#define USBD_PHYS_ADDR 0x10200000 +#define PCI_PHYS_ADDR 0x14005000 +#define MAC0_PHYS_ADDR 0x11500000 +#define MAC1_PHYS_ADDR 0x11510000 +#define MACEN_PHYS_ADDR 0x11520000 +#define MACDMA0_PHYS_ADDR 0x14004000 +#define MACDMA1_PHYS_ADDR 0x14004200 +#define I2S_PHYS_ADDR 0x11000000 +#define UART0_PHYS_ADDR 0x11100000 +#define UART3_PHYS_ADDR 0x11400000 +#define GPIO2_PHYS_ADDR 0x11700000 +#define SYS_PHYS_ADDR 0x11900000 +#define PCI_MEM_PHYS_ADDR 0x400000000ULL +#define PCI_IO_PHYS_ADDR 0x500000000ULL +#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL +#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#endif + +/********************************************************************/ + +#ifdef CONFIG_SOC_AU1100 +#define MEM_PHYS_ADDR 0x14000000 +#define STATIC_MEM_PHYS_ADDR 0x14001000 +#define DMA0_PHYS_ADDR 0x14002000 +#define DMA1_PHYS_ADDR 0x14002100 +#define DMA2_PHYS_ADDR 0x14002200 +#define DMA3_PHYS_ADDR 0x14002300 +#define DMA4_PHYS_ADDR 0x14002400 +#define DMA5_PHYS_ADDR 0x14002500 +#define DMA6_PHYS_ADDR 0x14002600 +#define DMA7_PHYS_ADDR 0x14002700 +#define IC0_PHYS_ADDR 0x10400000 +#define SD0_PHYS_ADDR 0x10600000 +#define SD1_PHYS_ADDR 0x10680000 +#define IC1_PHYS_ADDR 0x11800000 +#define AC97_PHYS_ADDR 0x10000000 +#define USBH_PHYS_ADDR 0x10100000 +#define USBD_PHYS_ADDR 0x10200000 +#define IRDA_PHYS_ADDR 0x10300000 +#define MAC0_PHYS_ADDR 0x10500000 +#define MACEN_PHYS_ADDR 0x10520000 +#define MACDMA0_PHYS_ADDR 0x14004000 +#define MACDMA1_PHYS_ADDR 0x14004200 +#define I2S_PHYS_ADDR 0x11000000 +#define UART0_PHYS_ADDR 0x11100000 +#define UART1_PHYS_ADDR 0x11200000 +#define UART3_PHYS_ADDR 0x11400000 +#define SSI0_PHYS_ADDR 0x11600000 +#define SSI1_PHYS_ADDR 0x11680000 +#define GPIO2_PHYS_ADDR 0x11700000 +#define SYS_PHYS_ADDR 0x11900000 +#define LCD_PHYS_ADDR 0x15000000 +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#endif + +/***********************************************************************/ + +#ifdef CONFIG_SOC_AU1550 +#define MEM_PHYS_ADDR 0x14000000 +#define STATIC_MEM_PHYS_ADDR 0x14001000 +#define IC0_PHYS_ADDR 0x10400000 +#define IC1_PHYS_ADDR 0x11800000 +#define USBH_PHYS_ADDR 0x14020000 +#define USBD_PHYS_ADDR 0x10200000 +#define PCI_PHYS_ADDR 0x14005000 +#define MAC0_PHYS_ADDR 0x10500000 +#define MAC1_PHYS_ADDR 0x10510000 +#define MACEN_PHYS_ADDR 0x10520000 +#define MACDMA0_PHYS_ADDR 0x14004000 +#define MACDMA1_PHYS_ADDR 0x14004200 +#define UART0_PHYS_ADDR 0x11100000 +#define UART1_PHYS_ADDR 0x11200000 +#define UART3_PHYS_ADDR 0x11400000 +#define GPIO2_PHYS_ADDR 0x11700000 +#define SYS_PHYS_ADDR 0x11900000 +#define DDMA_PHYS_ADDR 0x14002000 +#define PE_PHYS_ADDR 0x14008000 +#define PSC0_PHYS_ADDR 0x11A00000 +#define PSC1_PHYS_ADDR 0x11B00000 +#define PSC2_PHYS_ADDR 0x10A00000 +#define PSC3_PHYS_ADDR 0x10B00000 +#define PCI_MEM_PHYS_ADDR 0x400000000ULL +#define PCI_IO_PHYS_ADDR 0x500000000ULL +#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL +#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#endif + +/***********************************************************************/ + +#ifdef CONFIG_SOC_AU1200 +#define MEM_PHYS_ADDR 0x14000000 +#define STATIC_MEM_PHYS_ADDR 0x14001000 +#define AES_PHYS_ADDR 0x10300000 +#define CIM_PHYS_ADDR 0x14004000 +#define IC0_PHYS_ADDR 0x10400000 +#define IC1_PHYS_ADDR 0x11800000 +#define USBM_PHYS_ADDR 0x14020000 +#define USBH_PHYS_ADDR 0x14020100 +#define UART0_PHYS_ADDR 0x11100000 +#define UART1_PHYS_ADDR 0x11200000 +#define GPIO2_PHYS_ADDR 0x11700000 +#define SYS_PHYS_ADDR 0x11900000 +#define DDMA_PHYS_ADDR 0x14002000 +#define PSC0_PHYS_ADDR 0x11A00000 +#define PSC1_PHYS_ADDR 0x11B00000 +#define SD0_PHYS_ADDR 0x10600000 +#define SD1_PHYS_ADDR 0x10680000 +#define LCD_PHYS_ADDR 0x15000000 +#define SWCNT_PHYS_ADDR 0x1110010C +#define MAEFE_PHYS_ADDR 0x14012000 +#define MAEBE_PHYS_ADDR 0x14010000 +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#endif + +/* Static Bus Controller */ +#define MEM_STCFG0 0xB4001000 +#define MEM_STTIME0 0xB4001004 +#define MEM_STADDR0 0xB4001008 + +#define MEM_STCFG1 0xB4001010 +#define MEM_STTIME1 0xB4001014 +#define MEM_STADDR1 0xB4001018 + +#define MEM_STCFG2 0xB4001020 +#define MEM_STTIME2 0xB4001024 +#define MEM_STADDR2 0xB4001028 + +#define MEM_STCFG3 0xB4001030 +#define MEM_STTIME3 0xB4001034 +#define MEM_STADDR3 0xB4001038 + +#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) +#define MEM_STNDCTL 0xB4001100 +#define MEM_STSTAT 0xB4001104 + +#define MEM_STNAND_CMD 0x0 +#define MEM_STNAND_ADDR 0x4 +#define MEM_STNAND_DATA 0x20 +#endif + +/* Interrupt Controller 0 */ +#define IC0_CFG0RD 0xB0400040 +#define IC0_CFG0SET 0xB0400040 +#define IC0_CFG0CLR 0xB0400044 + +#define IC0_CFG1RD 0xB0400048 +#define IC0_CFG1SET 0xB0400048 +#define IC0_CFG1CLR 0xB040004C + +#define IC0_CFG2RD 0xB0400050 +#define IC0_CFG2SET 0xB0400050 +#define IC0_CFG2CLR 0xB0400054 + +#define IC0_REQ0INT 0xB0400054 +#define IC0_SRCRD 0xB0400058 +#define IC0_SRCSET 0xB0400058 +#define IC0_SRCCLR 0xB040005C +#define IC0_REQ1INT 0xB040005C + +#define IC0_ASSIGNRD 0xB0400060 +#define IC0_ASSIGNSET 0xB0400060 +#define IC0_ASSIGNCLR 0xB0400064 + +#define IC0_WAKERD 0xB0400068 +#define IC0_WAKESET 0xB0400068 +#define IC0_WAKECLR 0xB040006C + +#define IC0_MASKRD 0xB0400070 +#define IC0_MASKSET 0xB0400070 +#define IC0_MASKCLR 0xB0400074 + +#define IC0_RISINGRD 0xB0400078 +#define IC0_RISINGCLR 0xB0400078 +#define IC0_FALLINGRD 0xB040007C +#define IC0_FALLINGCLR 0xB040007C + +#define IC0_TESTBIT 0xB0400080 + +/* Interrupt Controller 1 */ +#define IC1_CFG0RD 0xB1800040 +#define IC1_CFG0SET 0xB1800040 +#define IC1_CFG0CLR 0xB1800044 + +#define IC1_CFG1RD 0xB1800048 +#define IC1_CFG1SET 0xB1800048 +#define IC1_CFG1CLR 0xB180004C + +#define IC1_CFG2RD 0xB1800050 +#define IC1_CFG2SET 0xB1800050 +#define IC1_CFG2CLR 0xB1800054 + +#define IC1_REQ0INT 0xB1800054 +#define IC1_SRCRD 0xB1800058 +#define IC1_SRCSET 0xB1800058 +#define IC1_SRCCLR 0xB180005C +#define IC1_REQ1INT 0xB180005C + +#define IC1_ASSIGNRD 0xB1800060 +#define IC1_ASSIGNSET 0xB1800060 +#define IC1_ASSIGNCLR 0xB1800064 + +#define IC1_WAKERD 0xB1800068 +#define IC1_WAKESET 0xB1800068 +#define IC1_WAKECLR 0xB180006C + +#define IC1_MASKRD 0xB1800070 +#define IC1_MASKSET 0xB1800070 +#define IC1_MASKCLR 0xB1800074 + +#define IC1_RISINGRD 0xB1800078 +#define IC1_RISINGCLR 0xB1800078 +#define IC1_FALLINGRD 0xB180007C +#define IC1_FALLINGCLR 0xB180007C + +#define IC1_TESTBIT 0xB1800080 + +/* Interrupt Configuration Modes */ +#define INTC_INT_DISABLED 0x0 +#define INTC_INT_RISE_EDGE 0x1 +#define INTC_INT_FALL_EDGE 0x2 +#define INTC_INT_RISE_AND_FALL_EDGE 0x3 +#define INTC_INT_HIGH_LEVEL 0x5 +#define INTC_INT_LOW_LEVEL 0x6 +#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 + +/* Interrupt Numbers */ +/* Au1000 */ +#ifdef CONFIG_SOC_AU1000 +enum soc_au1000_ints { + AU1000_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, + AU1000_UART0_INT = AU1000_FIRST_INT, + AU1000_UART1_INT, /* au1000 */ + AU1000_UART2_INT, /* au1000 */ + AU1000_UART3_INT, + AU1000_SSI0_INT, /* au1000 */ + AU1000_SSI1_INT, /* au1000 */ + AU1000_DMA_INT_BASE, + + AU1000_TOY_INT = AU1000_FIRST_INT + 14, + AU1000_TOY_MATCH0_INT, + AU1000_TOY_MATCH1_INT, + AU1000_TOY_MATCH2_INT, + AU1000_RTC_INT, + AU1000_RTC_MATCH0_INT, + AU1000_RTC_MATCH1_INT, + AU1000_RTC_MATCH2_INT, + AU1000_IRDA_TX_INT, /* au1000 */ + AU1000_IRDA_RX_INT, /* au1000 */ + AU1000_USB_DEV_REQ_INT, + AU1000_USB_DEV_SUS_INT, + AU1000_USB_HOST_INT, + AU1000_ACSYNC_INT, + AU1000_MAC0_DMA_INT, + AU1000_MAC1_DMA_INT, + AU1000_I2S_UO_INT, /* au1000 */ + AU1000_AC97C_INT, + AU1000_GPIO_0, + AU1000_GPIO_1, + AU1000_GPIO_2, + AU1000_GPIO_3, + AU1000_GPIO_4, + AU1000_GPIO_5, + AU1000_GPIO_6, + AU1000_GPIO_7, + AU1000_GPIO_8, + AU1000_GPIO_9, + AU1000_GPIO_10, + AU1000_GPIO_11, + AU1000_GPIO_12, + AU1000_GPIO_13, + AU1000_GPIO_14, + AU1000_GPIO_15, + AU1000_GPIO_16, + AU1000_GPIO_17, + AU1000_GPIO_18, + AU1000_GPIO_19, + AU1000_GPIO_20, + AU1000_GPIO_21, + AU1000_GPIO_22, + AU1000_GPIO_23, + AU1000_GPIO_24, + AU1000_GPIO_25, + AU1000_GPIO_26, + AU1000_GPIO_27, + AU1000_GPIO_28, + AU1000_GPIO_29, + AU1000_GPIO_30, + AU1000_GPIO_31, +}; + +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 +#define UART2_ADDR 0xB1300000 +#define UART3_ADDR 0xB1400000 + +#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ +#define USB_HOST_CONFIG 0xB017FFFC + +#define AU1000_ETH0_BASE 0xB0500000 +#define AU1000_ETH1_BASE 0xB0510000 +#define AU1000_MAC0_ENABLE 0xB0520000 +#define AU1000_MAC1_ENABLE 0xB0520004 +#define NUM_ETH_INTERFACES 2 +#endif /* CONFIG_SOC_AU1000 */ + +/* Au1500 */ +#ifdef CONFIG_SOC_AU1500 +enum soc_au1500_ints { + AU1500_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, + AU1500_UART0_INT = AU1500_FIRST_INT, + AU1000_PCI_INTA, /* au1500 */ + AU1000_PCI_INTB, /* au1500 */ + AU1500_UART3_INT, + AU1000_PCI_INTC, /* au1500 */ + AU1000_PCI_INTD, /* au1500 */ + AU1000_DMA_INT_BASE, + + AU1000_TOY_INT = AU1500_FIRST_INT + 14, + AU1000_TOY_MATCH0_INT, + AU1000_TOY_MATCH1_INT, + AU1000_TOY_MATCH2_INT, + AU1000_RTC_INT, + AU1000_RTC_MATCH0_INT, + AU1000_RTC_MATCH1_INT, + AU1000_RTC_MATCH2_INT, + AU1500_PCI_ERR_INT, + AU1500_RESERVED_INT, + AU1000_USB_DEV_REQ_INT, + AU1000_USB_DEV_SUS_INT, + AU1000_USB_HOST_INT, + AU1000_ACSYNC_INT, + AU1500_MAC0_DMA_INT, + AU1500_MAC1_DMA_INT, + AU1000_AC97C_INT = AU1500_FIRST_INT + 31, + AU1000_GPIO_0, + AU1000_GPIO_1, + AU1000_GPIO_2, + AU1000_GPIO_3, + AU1000_GPIO_4, + AU1000_GPIO_5, + AU1000_GPIO_6, + AU1000_GPIO_7, + AU1000_GPIO_8, + AU1000_GPIO_9, + AU1000_GPIO_10, + AU1000_GPIO_11, + AU1000_GPIO_12, + AU1000_GPIO_13, + AU1000_GPIO_14, + AU1000_GPIO_15, + AU1500_GPIO_200, + AU1500_GPIO_201, + AU1500_GPIO_202, + AU1500_GPIO_203, + AU1500_GPIO_20, + AU1500_GPIO_204, + AU1500_GPIO_205, + AU1500_GPIO_23, + AU1500_GPIO_24, + AU1500_GPIO_25, + AU1500_GPIO_26, + AU1500_GPIO_27, + AU1500_GPIO_28, + AU1500_GPIO_206, + AU1500_GPIO_207, + AU1500_GPIO_208_215, +}; + +/* shortcuts */ +#define INTA AU1000_PCI_INTA +#define INTB AU1000_PCI_INTB +#define INTC AU1000_PCI_INTC +#define INTD AU1000_PCI_INTD + +#define UART0_ADDR 0xB1100000 +#define UART3_ADDR 0xB1400000 + +#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ +#define USB_HOST_CONFIG 0xB017fffc + +#define AU1500_ETH0_BASE 0xB1500000 +#define AU1500_ETH1_BASE 0xB1510000 +#define AU1500_MAC0_ENABLE 0xB1520000 +#define AU1500_MAC1_ENABLE 0xB1520004 +#define NUM_ETH_INTERFACES 2 +#endif /* CONFIG_SOC_AU1500 */ + +/* Au1100 */ +#ifdef CONFIG_SOC_AU1100 +enum soc_au1100_ints { + AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, + AU1100_UART0_INT, + AU1100_UART1_INT, + AU1100_SD_INT, + AU1100_UART3_INT, + AU1000_SSI0_INT, + AU1000_SSI1_INT, + AU1000_DMA_INT_BASE, + + AU1000_TOY_INT = AU1100_FIRST_INT + 14, + AU1000_TOY_MATCH0_INT, + AU1000_TOY_MATCH1_INT, + AU1000_TOY_MATCH2_INT, + AU1000_RTC_INT, + AU1000_RTC_MATCH0_INT, + AU1000_RTC_MATCH1_INT, + AU1000_RTC_MATCH2_INT, + AU1000_IRDA_TX_INT, + AU1000_IRDA_RX_INT, + AU1000_USB_DEV_REQ_INT, + AU1000_USB_DEV_SUS_INT, + AU1000_USB_HOST_INT, + AU1000_ACSYNC_INT, + AU1100_MAC0_DMA_INT, + AU1100_GPIO_208_215, + AU1100_LCD_INT, + AU1000_AC97C_INT, + AU1000_GPIO_0, + AU1000_GPIO_1, + AU1000_GPIO_2, + AU1000_GPIO_3, + AU1000_GPIO_4, + AU1000_GPIO_5, + AU1000_GPIO_6, + AU1000_GPIO_7, + AU1000_GPIO_8, + AU1000_GPIO_9, + AU1000_GPIO_10, + AU1000_GPIO_11, + AU1000_GPIO_12, + AU1000_GPIO_13, + AU1000_GPIO_14, + AU1000_GPIO_15, + AU1000_GPIO_16, + AU1000_GPIO_17, + AU1000_GPIO_18, + AU1000_GPIO_19, + AU1000_GPIO_20, + AU1000_GPIO_21, + AU1000_GPIO_22, + AU1000_GPIO_23, + AU1000_GPIO_24, + AU1000_GPIO_25, + AU1000_GPIO_26, + AU1000_GPIO_27, + AU1000_GPIO_28, + AU1000_GPIO_29, + AU1000_GPIO_30, + AU1000_GPIO_31, +}; + +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 +#define UART3_ADDR 0xB1400000 + +#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ +#define USB_HOST_CONFIG 0xB017FFFC + +#define AU1100_ETH0_BASE 0xB0500000 +#define AU1100_MAC0_ENABLE 0xB0520000 +#define NUM_ETH_INTERFACES 1 +#endif /* CONFIG_SOC_AU1100 */ + +#ifdef CONFIG_SOC_AU1550 +enum soc_au1550_ints { + AU1550_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, + AU1550_UART0_INT = AU1550_FIRST_INT, + AU1550_PCI_INTA, + AU1550_PCI_INTB, + AU1550_DDMA_INT, + AU1550_CRYPTO_INT, + AU1550_PCI_INTC, + AU1550_PCI_INTD, + AU1550_PCI_RST_INT, + AU1550_UART1_INT, + AU1550_UART3_INT, + AU1550_PSC0_INT, + AU1550_PSC1_INT, + AU1550_PSC2_INT, + AU1550_PSC3_INT, + AU1000_TOY_INT, + AU1000_TOY_MATCH0_INT, + AU1000_TOY_MATCH1_INT, + AU1000_TOY_MATCH2_INT, + AU1000_RTC_INT, + AU1000_RTC_MATCH0_INT, + AU1000_RTC_MATCH1_INT, + AU1000_RTC_MATCH2_INT, + + AU1550_NAND_INT = AU1550_FIRST_INT + 23, + AU1550_USB_DEV_REQ_INT, + AU1000_USB_DEV_REQ_INT = AU1550_USB_DEV_REQ_INT, + AU1550_USB_DEV_SUS_INT, + AU1000_USB_DEV_SUS_INT = AU1550_USB_DEV_SUS_INT, + AU1550_USB_HOST_INT, + AU1000_USB_HOST_INT = AU1550_USB_HOST_INT, + AU1550_MAC0_DMA_INT, + AU1550_MAC1_DMA_INT, + AU1000_GPIO_0 = AU1550_FIRST_INT + 32, + AU1000_GPIO_1, + AU1000_GPIO_2, + AU1000_GPIO_3, + AU1000_GPIO_4, + AU1000_GPIO_5, + AU1000_GPIO_6, + AU1000_GPIO_7, + AU1000_GPIO_8, + AU1000_GPIO_9, + AU1000_GPIO_10, + AU1000_GPIO_11, + AU1000_GPIO_12, + AU1000_GPIO_13, + AU1000_GPIO_14, + AU1000_GPIO_15, + AU1550_GPIO_200, + AU1500_GPIO_201_205, /* Logical or of GPIO201:205 */ + AU1500_GPIO_16, + AU1500_GPIO_17, + AU1500_GPIO_20, + AU1500_GPIO_21, + AU1500_GPIO_22, + AU1500_GPIO_23, + AU1500_GPIO_24, + AU1500_GPIO_25, + AU1500_GPIO_26, + AU1500_GPIO_27, + AU1500_GPIO_28, + AU1500_GPIO_206, + AU1500_GPIO_207, + AU1500_GPIO_208_218, /* Logical or of GPIO208:218 */ +}; + +/* shortcuts */ +#define INTA AU1550_PCI_INTA +#define INTB AU1550_PCI_INTB +#define INTC AU1550_PCI_INTC +#define INTD AU1550_PCI_INTD + +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 +#define UART3_ADDR 0xB1400000 + +#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */ +#define USB_OHCI_LEN 0x00060000 +#define USB_HOST_CONFIG 0xB4027ffc + +#define AU1550_ETH0_BASE 0xB0500000 +#define AU1550_ETH1_BASE 0xB0510000 +#define AU1550_MAC0_ENABLE 0xB0520000 +#define AU1550_MAC1_ENABLE 0xB0520004 +#define NUM_ETH_INTERFACES 2 +#endif /* CONFIG_SOC_AU1550 */ + +#ifdef CONFIG_SOC_AU1200 +enum soc_au1200_ints { + AU1200_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, + AU1200_UART0_INT = AU1200_FIRST_INT, + AU1200_SWT_INT, + AU1200_SD_INT, + AU1200_DDMA_INT, + AU1200_MAE_BE_INT, + AU1200_GPIO_200, + AU1200_GPIO_201, + AU1200_GPIO_202, + AU1200_UART1_INT, + AU1200_MAE_FE_INT, + AU1200_PSC0_INT, + AU1200_PSC1_INT, + AU1200_AES_INT, + AU1200_CAMERA_INT, + AU1000_TOY_INT, + AU1000_TOY_MATCH0_INT, + AU1000_TOY_MATCH1_INT, + AU1000_TOY_MATCH2_INT, + AU1000_RTC_INT, + AU1000_RTC_MATCH0_INT, + AU1000_RTC_MATCH1_INT, + AU1000_RTC_MATCH2_INT, + + AU1200_NAND_INT = AU1200_FIRST_INT + 23, + AU1200_GPIO_204, + AU1200_GPIO_205, + AU1200_GPIO_206, + AU1200_GPIO_207, + AU1200_GPIO_208_215, /* Logical OR of 208:215 */ + AU1200_USB_INT, + AU1000_USB_HOST_INT = AU1200_USB_INT, + AU1200_LCD_INT, + AU1200_MAE_BOTH_INT, + AU1000_GPIO_0, + AU1000_GPIO_1, + AU1000_GPIO_2, + AU1000_GPIO_3, + AU1000_GPIO_4, + AU1000_GPIO_5, + AU1000_GPIO_6, + AU1000_GPIO_7, + AU1000_GPIO_8, + AU1000_GPIO_9, + AU1000_GPIO_10, + AU1000_GPIO_11, + AU1000_GPIO_12, + AU1000_GPIO_13, + AU1000_GPIO_14, + AU1000_GPIO_15, + AU1000_GPIO_16, + AU1000_GPIO_17, + AU1000_GPIO_18, + AU1000_GPIO_19, + AU1000_GPIO_20, + AU1000_GPIO_21, + AU1000_GPIO_22, + AU1000_GPIO_23, + AU1000_GPIO_24, + AU1000_GPIO_25, + AU1000_GPIO_26, + AU1000_GPIO_27, + AU1000_GPIO_28, + AU1000_GPIO_29, + AU1000_GPIO_30, + AU1000_GPIO_31, +}; + +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 + +#define USB_UOC_BASE 0x14020020 +#define USB_UOC_LEN 0x20 +#define USB_OHCI_BASE 0x14020100 +#define USB_OHCI_LEN 0x100 +#define USB_EHCI_BASE 0x14020200 +#define USB_EHCI_LEN 0x100 +#define USB_UDC_BASE 0x14022000 +#define USB_UDC_LEN 0x2000 +#define USB_MSR_BASE 0xB4020000 +#define USB_MSR_MCFG 4 +#define USBMSRMCFG_OMEMEN 0 +#define USBMSRMCFG_OBMEN 1 +#define USBMSRMCFG_EMEMEN 2 +#define USBMSRMCFG_EBMEN 3 +#define USBMSRMCFG_DMEMEN 4 +#define USBMSRMCFG_DBMEN 5 +#define USBMSRMCFG_GMEMEN 6 +#define USBMSRMCFG_OHCCLKEN 16 +#define USBMSRMCFG_EHCCLKEN 17 +#define USBMSRMCFG_UDCCLKEN 18 +#define USBMSRMCFG_PHYPLLEN 19 +#define USBMSRMCFG_RDCOMB 30 +#define USBMSRMCFG_PFEN 31 + +#endif /* CONFIG_SOC_AU1200 */ + +#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8) +#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31) +#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_BASE + 32) +#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31) + +#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST +#define INTX 0xFF /* not valid */ + +/* Programmable Counters 0 and 1 */ +#define SYS_BASE 0xB1900000 +#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) +# define SYS_CNTRL_E1S (1 << 23) +# define SYS_CNTRL_T1S (1 << 20) +# define SYS_CNTRL_M21 (1 << 19) +# define SYS_CNTRL_M11 (1 << 18) +# define SYS_CNTRL_M01 (1 << 17) +# define SYS_CNTRL_C1S (1 << 16) +# define SYS_CNTRL_BP (1 << 14) +# define SYS_CNTRL_EN1 (1 << 13) +# define SYS_CNTRL_BT1 (1 << 12) +# define SYS_CNTRL_EN0 (1 << 11) +# define SYS_CNTRL_BT0 (1 << 10) +# define SYS_CNTRL_E0 (1 << 8) +# define SYS_CNTRL_E0S (1 << 7) +# define SYS_CNTRL_32S (1 << 5) +# define SYS_CNTRL_T0S (1 << 4) +# define SYS_CNTRL_M20 (1 << 3) +# define SYS_CNTRL_M10 (1 << 2) +# define SYS_CNTRL_M00 (1 << 1) +# define SYS_CNTRL_C0S (1 << 0) + +/* Programmable Counter 0 Registers */ +#define SYS_TOYTRIM (SYS_BASE + 0) +#define SYS_TOYWRITE (SYS_BASE + 4) +#define SYS_TOYMATCH0 (SYS_BASE + 8) +#define SYS_TOYMATCH1 (SYS_BASE + 0xC) +#define SYS_TOYMATCH2 (SYS_BASE + 0x10) +#define SYS_TOYREAD (SYS_BASE + 0x40) + +/* Programmable Counter 1 Registers */ +#define SYS_RTCTRIM (SYS_BASE + 0x44) +#define SYS_RTCWRITE (SYS_BASE + 0x48) +#define SYS_RTCMATCH0 (SYS_BASE + 0x4C) +#define SYS_RTCMATCH1 (SYS_BASE + 0x50) +#define SYS_RTCMATCH2 (SYS_BASE + 0x54) +#define SYS_RTCREAD (SYS_BASE + 0x58) + +/* I2S Controller */ +#define I2S_DATA 0xB1000000 +# define I2S_DATA_MASK 0xffffff +#define I2S_CONFIG 0xB1000004 +# define I2S_CONFIG_XU (1 << 25) +# define I2S_CONFIG_XO (1 << 24) +# define I2S_CONFIG_RU (1 << 23) +# define I2S_CONFIG_RO (1 << 22) +# define I2S_CONFIG_TR (1 << 21) +# define I2S_CONFIG_TE (1 << 20) +# define I2S_CONFIG_TF (1 << 19) +# define I2S_CONFIG_RR (1 << 18) +# define I2S_CONFIG_RE (1 << 17) +# define I2S_CONFIG_RF (1 << 16) +# define I2S_CONFIG_PD (1 << 11) +# define I2S_CONFIG_LB (1 << 10) +# define I2S_CONFIG_IC (1 << 9) +# define I2S_CONFIG_FM_BIT 7 +# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_TN (1 << 6) +# define I2S_CONFIG_RN (1 << 5) +# define I2S_CONFIG_SZ_BIT 0 +# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) + +#define I2S_CONTROL 0xB1000008 +# define I2S_CONTROL_D (1 << 1) +# define I2S_CONTROL_CE (1 << 0) + +/* USB Host Controller */ +#ifndef USB_OHCI_LEN +#define USB_OHCI_LEN 0x00100000 +#endif + +#ifndef CONFIG_SOC_AU1200 + +/* USB Device Controller */ +#define USBD_EP0RD 0xB0200000 +#define USBD_EP0WR 0xB0200004 +#define USBD_EP2WR 0xB0200008 +#define USBD_EP3WR 0xB020000C +#define USBD_EP4RD 0xB0200010 +#define USBD_EP5RD 0xB0200014 +#define USBD_INTEN 0xB0200018 +#define USBD_INTSTAT 0xB020001C +# define USBDEV_INT_SOF (1 << 12) +# define USBDEV_INT_HF_BIT 6 +# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT) +# define USBDEV_INT_CMPLT_BIT 0 +# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT) +#define USBD_CONFIG 0xB0200020 +#define USBD_EP0CS 0xB0200024 +#define USBD_EP2CS 0xB0200028 +#define USBD_EP3CS 0xB020002C +#define USBD_EP4CS 0xB0200030 +#define USBD_EP5CS 0xB0200034 +# define USBDEV_CS_SU (1 << 14) +# define USBDEV_CS_NAK (1 << 13) +# define USBDEV_CS_ACK (1 << 12) +# define USBDEV_CS_BUSY (1 << 11) +# define USBDEV_CS_TSIZE_BIT 1 +# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT) +# define USBDEV_CS_STALL (1 << 0) +#define USBD_EP0RDSTAT 0xB0200040 +#define USBD_EP0WRSTAT 0xB0200044 +#define USBD_EP2WRSTAT 0xB0200048 +#define USBD_EP3WRSTAT 0xB020004C +#define USBD_EP4RDSTAT 0xB0200050 +#define USBD_EP5RDSTAT 0xB0200054 +# define USBDEV_FSTAT_FLUSH (1 << 6) +# define USBDEV_FSTAT_UF (1 << 5) +# define USBDEV_FSTAT_OF (1 << 4) +# define USBDEV_FSTAT_FCNT_BIT 0 +# define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT) +#define USBD_ENABLE 0xB0200058 +# define USBDEV_ENABLE (1 << 1) +# define USBDEV_CE (1 << 0) + +#endif /* !CONFIG_SOC_AU1200 */ + +/* Ethernet Controllers */ + +/* 4 byte offsets from AU1000_ETH_BASE */ +#define MAC_CONTROL 0x0 +# define MAC_RX_ENABLE (1 << 2) +# define MAC_TX_ENABLE (1 << 3) +# define MAC_DEF_CHECK (1 << 5) +# define MAC_SET_BL(X) (((X) & 0x3) << 6) +# define MAC_AUTO_PAD (1 << 8) +# define MAC_DISABLE_RETRY (1 << 10) +# define MAC_DISABLE_BCAST (1 << 11) +# define MAC_LATE_COL (1 << 12) +# define MAC_HASH_MODE (1 << 13) +# define MAC_HASH_ONLY (1 << 15) +# define MAC_PASS_ALL (1 << 16) +# define MAC_INVERSE_FILTER (1 << 17) +# define MAC_PROMISCUOUS (1 << 18) +# define MAC_PASS_ALL_MULTI (1 << 19) +# define MAC_FULL_DUPLEX (1 << 20) +# define MAC_NORMAL_MODE 0 +# define MAC_INT_LOOPBACK (1 << 21) +# define MAC_EXT_LOOPBACK (1 << 22) +# define MAC_DISABLE_RX_OWN (1 << 23) +# define MAC_BIG_ENDIAN (1 << 30) +# define MAC_RX_ALL (1 << 31) +#define MAC_ADDRESS_HIGH 0x4 +#define MAC_ADDRESS_LOW 0x8 +#define MAC_MCAST_HIGH 0xC +#define MAC_MCAST_LOW 0x10 +#define MAC_MII_CNTRL 0x14 +# define MAC_MII_BUSY (1 << 0) +# define MAC_MII_READ 0 +# define MAC_MII_WRITE (1 << 1) +# define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6) +# define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11) +#define MAC_MII_DATA 0x18 +#define MAC_FLOW_CNTRL 0x1C +# define MAC_FLOW_CNTRL_BUSY (1 << 0) +# define MAC_FLOW_CNTRL_ENABLE (1 << 1) +# define MAC_PASS_CONTROL (1 << 2) +# define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16) +#define MAC_VLAN1_TAG 0x20 +#define MAC_VLAN2_TAG 0x24 + +/* Ethernet Controller Enable */ + +# define MAC_EN_CLOCK_ENABLE (1 << 0) +# define MAC_EN_RESET0 (1 << 1) +# define MAC_EN_TOSS (0 << 2) +# define MAC_EN_CACHEABLE (1 << 3) +# define MAC_EN_RESET1 (1 << 4) +# define MAC_EN_RESET2 (1 << 5) +# define MAC_DMA_RESET (1 << 6) + +/* Ethernet Controller DMA Channels */ + +#define MAC0_TX_DMA_ADDR 0xB4004000 +#define MAC1_TX_DMA_ADDR 0xB4004200 +/* offsets from MAC_TX_RING_ADDR address */ +#define MAC_TX_BUFF0_STATUS 0x0 +# define TX_FRAME_ABORTED (1 << 0) +# define TX_JAB_TIMEOUT (1 << 1) +# define TX_NO_CARRIER (1 << 2) +# define TX_LOSS_CARRIER (1 << 3) +# define TX_EXC_DEF (1 << 4) +# define TX_LATE_COLL_ABORT (1 << 5) +# define TX_EXC_COLL (1 << 6) +# define TX_UNDERRUN (1 << 7) +# define TX_DEFERRED (1 << 8) +# define TX_LATE_COLL (1 << 9) +# define TX_COLL_CNT_MASK (0xF << 10) +# define TX_PKT_RETRY (1 << 31) +#define MAC_TX_BUFF0_ADDR 0x4 +# define TX_DMA_ENABLE (1 << 0) +# define TX_T_DONE (1 << 1) +# define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) +#define MAC_TX_BUFF0_LEN 0x8 +#define MAC_TX_BUFF1_STATUS 0x10 +#define MAC_TX_BUFF1_ADDR 0x14 +#define MAC_TX_BUFF1_LEN 0x18 +#define MAC_TX_BUFF2_STATUS 0x20 +#define MAC_TX_BUFF2_ADDR 0x24 +#define MAC_TX_BUFF2_LEN 0x28 +#define MAC_TX_BUFF3_STATUS 0x30 +#define MAC_TX_BUFF3_ADDR 0x34 +#define MAC_TX_BUFF3_LEN 0x38 + +#define MAC0_RX_DMA_ADDR 0xB4004100 +#define MAC1_RX_DMA_ADDR 0xB4004300 +/* offsets from MAC_RX_RING_ADDR */ +#define MAC_RX_BUFF0_STATUS 0x0 +# define RX_FRAME_LEN_MASK 0x3fff +# define RX_WDOG_TIMER (1 << 14) +# define RX_RUNT (1 << 15) +# define RX_OVERLEN (1 << 16) +# define RX_COLL (1 << 17) +# define RX_ETHER (1 << 18) +# define RX_MII_ERROR (1 << 19) +# define RX_DRIBBLING (1 << 20) +# define RX_CRC_ERROR (1 << 21) +# define RX_VLAN1 (1 << 22) +# define RX_VLAN2 (1 << 23) +# define RX_LEN_ERROR (1 << 24) +# define RX_CNTRL_FRAME (1 << 25) +# define RX_U_CNTRL_FRAME (1 << 26) +# define RX_MCAST_FRAME (1 << 27) +# define RX_BCAST_FRAME (1 << 28) +# define RX_FILTER_FAIL (1 << 29) +# define RX_PACKET_FILTER (1 << 30) +# define RX_MISSED_FRAME (1 << 31) + +# define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \ + RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ + RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) +#define MAC_RX_BUFF0_ADDR 0x4 +# define RX_DMA_ENABLE (1 << 0) +# define RX_T_DONE (1 << 1) +# define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) +# define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0) +#define MAC_RX_BUFF1_STATUS 0x10 +#define MAC_RX_BUFF1_ADDR 0x14 +#define MAC_RX_BUFF2_STATUS 0x20 +#define MAC_RX_BUFF2_ADDR 0x24 +#define MAC_RX_BUFF3_STATUS 0x30 +#define MAC_RX_BUFF3_ADDR 0x34 + +/* UARTS 0-3 */ +#define UART_BASE UART0_ADDR +#ifdef CONFIG_SOC_AU1200 +#define UART_DEBUG_BASE UART1_ADDR +#else +#define UART_DEBUG_BASE UART3_ADDR +#endif + +#define UART_RX 0 /* Receive buffer */ +#define UART_TX 4 /* Transmit buffer */ +#define UART_IER 8 /* Interrupt Enable Register */ +#define UART_IIR 0xC /* Interrupt ID Register */ +#define UART_FCR 0x10 /* FIFO Control Register */ +#define UART_LCR 0x14 /* Line Control Register */ +#define UART_MCR 0x18 /* Modem Control Register */ +#define UART_LSR 0x1C /* Line Status Register */ +#define UART_MSR 0x20 /* Modem Status Register */ +#define UART_CLK 0x28 /* Baud Rate Clock Divider */ +#define UART_MOD_CNTRL 0x100 /* Module Control */ + +#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ +#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ +#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ +#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ +#define UART_FCR_TRIGGER_MASK 0xF0 /* Mask for the FIFO trigger range */ +#define UART_FCR_R_TRIGGER_1 0x00 /* Mask for receive trigger set at 1 */ +#define UART_FCR_R_TRIGGER_4 0x40 /* Mask for receive trigger set at 4 */ +#define UART_FCR_R_TRIGGER_8 0x80 /* Mask for receive trigger set at 8 */ +#define UART_FCR_R_TRIGGER_14 0xA0 /* Mask for receive trigger set at 14 */ +#define UART_FCR_T_TRIGGER_0 0x00 /* Mask for transmit trigger set at 0 */ +#define UART_FCR_T_TRIGGER_4 0x10 /* Mask for transmit trigger set at 4 */ +#define UART_FCR_T_TRIGGER_8 0x20 /* Mask for transmit trigger set at 8 */ +#define UART_FCR_T_TRIGGER_12 0x30 /* Mask for transmit trigger set at 12 */ + +/* + * These are the definitions for the Line Control Register + */ +#define UART_LCR_SBC 0x40 /* Set break control */ +#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ +#define UART_LCR_EPAR 0x10 /* Even parity select */ +#define UART_LCR_PARITY 0x08 /* Parity Enable */ +#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ +#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ +#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ +#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ +#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ + +/* + * These are the definitions for the Line Status Register + */ +#define UART_LSR_TEMT 0x40 /* Transmitter empty */ +#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ +#define UART_LSR_BI 0x10 /* Break interrupt indicator */ +#define UART_LSR_FE 0x08 /* Frame error indicator */ +#define UART_LSR_PE 0x04 /* Parity error indicator */ +#define UART_LSR_OE 0x02 /* Overrun error indicator */ +#define UART_LSR_DR 0x01 /* Receiver data ready */ + +/* + * These are the definitions for the Interrupt Identification Register + */ +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ +#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ +#define UART_IIR_MSI 0x00 /* Modem status interrupt */ +#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ +#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ +#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ + +/* + * These are the definitions for the Interrupt Enable Register + */ +#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ +#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ +#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ +#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ + +/* + * These are the definitions for the Modem Control Register + */ +#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ +#define UART_MCR_OUT2 0x08 /* Out2 complement */ +#define UART_MCR_OUT1 0x04 /* Out1 complement */ +#define UART_MCR_RTS 0x02 /* RTS complement */ +#define UART_MCR_DTR 0x01 /* DTR complement */ + +/* + * These are the definitions for the Modem Status Register + */ +#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ +#define UART_MSR_RI 0x40 /* Ring Indicator */ +#define UART_MSR_DSR 0x20 /* Data Set Ready */ +#define UART_MSR_CTS 0x10 /* Clear to Send */ +#define UART_MSR_DDCD 0x08 /* Delta DCD */ +#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ +#define UART_MSR_DDSR 0x02 /* Delta DSR */ +#define UART_MSR_DCTS 0x01 /* Delta CTS */ +#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ + +/* SSIO */ +#define SSI0_STATUS 0xB1600000 +# define SSI_STATUS_BF (1 << 4) +# define SSI_STATUS_OF (1 << 3) +# define SSI_STATUS_UF (1 << 2) +# define SSI_STATUS_D (1 << 1) +# define SSI_STATUS_B (1 << 0) +#define SSI0_INT 0xB1600004 +# define SSI_INT_OI (1 << 3) +# define SSI_INT_UI (1 << 2) +# define SSI_INT_DI (1 << 1) +#define SSI0_INT_ENABLE 0xB1600008 +# define SSI_INTE_OIE (1 << 3) +# define SSI_INTE_UIE (1 << 2) +# define SSI_INTE_DIE (1 << 1) +#define SSI0_CONFIG 0xB1600020 +# define SSI_CONFIG_AO (1 << 24) +# define SSI_CONFIG_DO (1 << 23) +# define SSI_CONFIG_ALEN_BIT 20 +# define SSI_CONFIG_ALEN_MASK (0x7 << 20) +# define SSI_CONFIG_DLEN_BIT 16 +# define SSI_CONFIG_DLEN_MASK (0x7 << 16) +# define SSI_CONFIG_DD (1 << 11) +# define SSI_CONFIG_AD (1 << 10) +# define SSI_CONFIG_BM_BIT 8 +# define SSI_CONFIG_BM_MASK (0x3 << 8) +# define SSI_CONFIG_CE (1 << 7) +# define SSI_CONFIG_DP (1 << 6) +# define SSI_CONFIG_DL (1 << 5) +# define SSI_CONFIG_EP (1 << 4) +#define SSI0_ADATA 0xB1600024 +# define SSI_AD_D (1 << 24) +# define SSI_AD_ADDR_BIT 16 +# define SSI_AD_ADDR_MASK (0xff << 16) +# define SSI_AD_DATA_BIT 0 +# define SSI_AD_DATA_MASK (0xfff << 0) +#define SSI0_CLKDIV 0xB1600028 +#define SSI0_CONTROL 0xB1600100 +# define SSI_CONTROL_CD (1 << 1) +# define SSI_CONTROL_E (1 << 0) + +/* SSI1 */ +#define SSI1_STATUS 0xB1680000 +#define SSI1_INT 0xB1680004 +#define SSI1_INT_ENABLE 0xB1680008 +#define SSI1_CONFIG 0xB1680020 +#define SSI1_ADATA 0xB1680024 +#define SSI1_CLKDIV 0xB1680028 +#define SSI1_ENABLE 0xB1680100 + +/* + * Register content definitions + */ +#define SSI_STATUS_BF (1 << 4) +#define SSI_STATUS_OF (1 << 3) +#define SSI_STATUS_UF (1 << 2) +#define SSI_STATUS_D (1 << 1) +#define SSI_STATUS_B (1 << 0) + +/* SSI_INT */ +#define SSI_INT_OI (1 << 3) +#define SSI_INT_UI (1 << 2) +#define SSI_INT_DI (1 << 1) + +/* SSI_INTEN */ +#define SSI_INTEN_OIE (1 << 3) +#define SSI_INTEN_UIE (1 << 2) +#define SSI_INTEN_DIE (1 << 1) + +#define SSI_CONFIG_AO (1 << 24) +#define SSI_CONFIG_DO (1 << 23) +#define SSI_CONFIG_ALEN (7 << 20) +#define SSI_CONFIG_DLEN (15 << 16) +#define SSI_CONFIG_DD (1 << 11) +#define SSI_CONFIG_AD (1 << 10) +#define SSI_CONFIG_BM (3 << 8) +#define SSI_CONFIG_CE (1 << 7) +#define SSI_CONFIG_DP (1 << 6) +#define SSI_CONFIG_DL (1 << 5) +#define SSI_CONFIG_EP (1 << 4) +#define SSI_CONFIG_ALEN_N(N) ((N-1) << 20) +#define SSI_CONFIG_DLEN_N(N) ((N-1) << 16) +#define SSI_CONFIG_BM_HI (0 << 8) +#define SSI_CONFIG_BM_LO (1 << 8) +#define SSI_CONFIG_BM_CY (2 << 8) + +#define SSI_ADATA_D (1 << 24) +#define SSI_ADATA_ADDR (0xFF << 16) +#define SSI_ADATA_DATA 0x0FFF +#define SSI_ADATA_ADDR_N(N) (N << 16) + +#define SSI_ENABLE_CD (1 << 1) +#define SSI_ENABLE_E (1 << 0) + +/* IrDA Controller */ +#define IRDA_BASE 0xB0300000 +#define IR_RING_PTR_STATUS (IRDA_BASE + 0x00) +#define IR_RING_BASE_ADDR_H (IRDA_BASE + 0x04) +#define IR_RING_BASE_ADDR_L (IRDA_BASE + 0x08) +#define IR_RING_SIZE (IRDA_BASE + 0x0C) +#define IR_RING_PROMPT (IRDA_BASE + 0x10) +#define IR_RING_ADDR_CMPR (IRDA_BASE + 0x14) +#define IR_INT_CLEAR (IRDA_BASE + 0x18) +#define IR_CONFIG_1 (IRDA_BASE + 0x20) +# define IR_RX_INVERT_LED (1 << 0) +# define IR_TX_INVERT_LED (1 << 1) +# define IR_ST (1 << 2) +# define IR_SF (1 << 3) +# define IR_SIR (1 << 4) +# define IR_MIR (1 << 5) +# define IR_FIR (1 << 6) +# define IR_16CRC (1 << 7) +# define IR_TD (1 << 8) +# define IR_RX_ALL (1 << 9) +# define IR_DMA_ENABLE (1 << 10) +# define IR_RX_ENABLE (1 << 11) +# define IR_TX_ENABLE (1 << 12) +# define IR_LOOPBACK (1 << 14) +# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ + IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) +#define IR_SIR_FLAGS (IRDA_BASE + 0x24) +#define IR_ENABLE (IRDA_BASE + 0x28) +# define IR_RX_STATUS (1 << 9) +# define IR_TX_STATUS (1 << 10) +#define IR_READ_PHY_CONFIG (IRDA_BASE + 0x2C) +#define IR_WRITE_PHY_CONFIG (IRDA_BASE + 0x30) +#define IR_MAX_PKT_LEN (IRDA_BASE + 0x34) +#define IR_RX_BYTE_CNT (IRDA_BASE + 0x38) +#define IR_CONFIG_2 (IRDA_BASE + 0x3C) +# define IR_MODE_INV (1 << 0) +# define IR_ONE_PIN (1 << 1) +#define IR_INTERFACE_CONFIG (IRDA_BASE + 0x40) + +/* GPIO */ +#define SYS_PINFUNC 0xB190002C +# define SYS_PF_USB (1 << 15) /* 2nd USB device/host */ +# define SYS_PF_U3 (1 << 14) /* GPIO23/U3TXD */ +# define SYS_PF_U2 (1 << 13) /* GPIO22/U2TXD */ +# define SYS_PF_U1 (1 << 12) /* GPIO21/U1TXD */ +# define SYS_PF_SRC (1 << 11) /* GPIO6/SROMCKE */ +# define SYS_PF_CK5 (1 << 10) /* GPIO3/CLK5 */ +# define SYS_PF_CK4 (1 << 9) /* GPIO2/CLK4 */ +# define SYS_PF_IRF (1 << 8) /* GPIO15/IRFIRSEL */ +# define SYS_PF_UR3 (1 << 7) /* GPIO[14:9]/UART3 */ +# define SYS_PF_I2D (1 << 6) /* GPIO8/I2SDI */ +# define SYS_PF_I2S (1 << 5) /* I2S/GPIO[29:31] */ +# define SYS_PF_NI2 (1 << 4) /* NI2/GPIO[24:28] */ +# define SYS_PF_U0 (1 << 3) /* U0TXD/GPIO20 */ +# define SYS_PF_RD (1 << 2) /* IRTXD/GPIO19 */ +# define SYS_PF_A97 (1 << 1) /* AC97/SSL1 */ +# define SYS_PF_S0 (1 << 0) /* SSI_0/GPIO[16:18] */ + +/* Au1100 only */ +# define SYS_PF_PC (1 << 18) /* PCMCIA/GPIO[207:204] */ +# define SYS_PF_LCD (1 << 17) /* extern lcd/GPIO[203:200] */ +# define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */ +# define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */ + +/* Au1550 only. Redefines lots of pins */ +# define SYS_PF_PSC2_MASK (7 << 17) +# define SYS_PF_PSC2_AC97 0 +# define SYS_PF_PSC2_SPI 0 +# define SYS_PF_PSC2_I2S (1 << 17) +# define SYS_PF_PSC2_SMBUS (3 << 17) +# define SYS_PF_PSC2_GPIO (7 << 17) +# define SYS_PF_PSC3_MASK (7 << 20) +# define SYS_PF_PSC3_AC97 0 +# define SYS_PF_PSC3_SPI 0 +# define SYS_PF_PSC3_I2S (1 << 20) +# define SYS_PF_PSC3_SMBUS (3 << 20) +# define SYS_PF_PSC3_GPIO (7 << 20) +# define SYS_PF_PSC1_S1 (1 << 1) +# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2)) + +/* Au1200 only */ +#ifdef CONFIG_SOC_AU1200 +#define SYS_PINFUNC_DMA (1 << 31) +#define SYS_PINFUNC_S0A (1 << 30) +#define SYS_PINFUNC_S1A (1 << 29) +#define SYS_PINFUNC_LP0 (1 << 28) +#define SYS_PINFUNC_LP1 (1 << 27) +#define SYS_PINFUNC_LD16 (1 << 26) +#define SYS_PINFUNC_LD8 (1 << 25) +#define SYS_PINFUNC_LD1 (1 << 24) +#define SYS_PINFUNC_LD0 (1 << 23) +#define SYS_PINFUNC_P1A (3 << 21) +#define SYS_PINFUNC_P1B (1 << 20) +#define SYS_PINFUNC_FS3 (1 << 19) +#define SYS_PINFUNC_P0A (3 << 17) +#define SYS_PINFUNC_CS (1 << 16) +#define SYS_PINFUNC_CIM (1 << 15) +#define SYS_PINFUNC_P1C (1 << 14) +#define SYS_PINFUNC_U1T (1 << 12) +#define SYS_PINFUNC_U1R (1 << 11) +#define SYS_PINFUNC_EX1 (1 << 10) +#define SYS_PINFUNC_EX0 (1 << 9) +#define SYS_PINFUNC_U0R (1 << 8) +#define SYS_PINFUNC_MC (1 << 7) +#define SYS_PINFUNC_S0B (1 << 6) +#define SYS_PINFUNC_S0C (1 << 5) +#define SYS_PINFUNC_P0B (1 << 4) +#define SYS_PINFUNC_U0T (1 << 3) +#define SYS_PINFUNC_S1B (1 << 2) +#endif + +#define SYS_TRIOUTRD 0xB1900100 +#define SYS_TRIOUTCLR 0xB1900100 +#define SYS_OUTPUTRD 0xB1900108 +#define SYS_OUTPUTSET 0xB1900108 +#define SYS_OUTPUTCLR 0xB190010C +#define SYS_PINSTATERD 0xB1900110 +#define SYS_PININPUTEN 0xB1900110 + +/* GPIO2, Au1500, Au1550 only */ +#define GPIO2_BASE 0xB1700000 +#define GPIO2_DIR (GPIO2_BASE + 0) +#define GPIO2_OUTPUT (GPIO2_BASE + 8) +#define GPIO2_PINSTATE (GPIO2_BASE + 0xC) +#define GPIO2_INTENABLE (GPIO2_BASE + 0x10) +#define GPIO2_ENABLE (GPIO2_BASE + 0x14) + +/* Power Management */ +#define SYS_SCRATCH0 0xB1900018 +#define SYS_SCRATCH1 0xB190001C +#define SYS_WAKEMSK 0xB1900034 +#define SYS_ENDIAN 0xB1900038 +#define SYS_POWERCTRL 0xB190003C +#define SYS_WAKESRC 0xB190005C +#define SYS_SLPPWR 0xB1900078 +#define SYS_SLEEP 0xB190007C + +/* Clock Controller */ +#define SYS_FREQCTRL0 0xB1900020 +# define SYS_FC_FRDIV2_BIT 22 +# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT) +# define SYS_FC_FE2 (1 << 21) +# define SYS_FC_FS2 (1 << 20) +# define SYS_FC_FRDIV1_BIT 12 +# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT) +# define SYS_FC_FE1 (1 << 11) +# define SYS_FC_FS1 (1 << 10) +# define SYS_FC_FRDIV0_BIT 2 +# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT) +# define SYS_FC_FE0 (1 << 1) +# define SYS_FC_FS0 (1 << 0) +#define SYS_FREQCTRL1 0xB1900024 +# define SYS_FC_FRDIV5_BIT 22 +# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT) +# define SYS_FC_FE5 (1 << 21) +# define SYS_FC_FS5 (1 << 20) +# define SYS_FC_FRDIV4_BIT 12 +# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT) +# define SYS_FC_FE4 (1 << 11) +# define SYS_FC_FS4 (1 << 10) +# define SYS_FC_FRDIV3_BIT 2 +# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT) +# define SYS_FC_FE3 (1 << 1) +# define SYS_FC_FS3 (1 << 0) +#define SYS_CLKSRC 0xB1900028 +# define SYS_CS_ME1_BIT 27 +# define SYS_CS_ME1_MASK (0x7 << SYS_CS_ME1_BIT) +# define SYS_CS_DE1 (1 << 26) +# define SYS_CS_CE1 (1 << 25) +# define SYS_CS_ME0_BIT 22 +# define SYS_CS_ME0_MASK (0x7 << SYS_CS_ME0_BIT) +# define SYS_CS_DE0 (1 << 21) +# define SYS_CS_CE0 (1 << 20) +# define SYS_CS_MI2_BIT 17 +# define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT) +# define SYS_CS_DI2 (1 << 16) +# define SYS_CS_CI2 (1 << 15) +#ifdef CONFIG_SOC_AU1100 +# define SYS_CS_ML_BIT 7 +# define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT) +# define SYS_CS_DL (1 << 6) +# define SYS_CS_CL (1 << 5) +#else +# define SYS_CS_MUH_BIT 12 +# define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT) +# define SYS_CS_DUH (1 << 11) +# define SYS_CS_CUH (1 << 10) +# define SYS_CS_MUD_BIT 7 +# define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT) +# define SYS_CS_DUD (1 << 6) +# define SYS_CS_CUD (1 << 5) +#endif +# define SYS_CS_MIR_BIT 2 +# define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT) +# define SYS_CS_DIR (1 << 1) +# define SYS_CS_CIR (1 << 0) + +# define SYS_CS_MUX_AUX 0x1 +# define SYS_CS_MUX_FQ0 0x2 +# define SYS_CS_MUX_FQ1 0x3 +# define SYS_CS_MUX_FQ2 0x4 +# define SYS_CS_MUX_FQ3 0x5 +# define SYS_CS_MUX_FQ4 0x6 +# define SYS_CS_MUX_FQ5 0x7 +#define SYS_CPUPLL 0xB1900060 +#define SYS_AUXPLL 0xB1900064 + +/* AC97 Controller */ +#define AC97C_CONFIG 0xB0000000 +# define AC97C_RECV_SLOTS_BIT 13 +# define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT) +# define AC97C_XMIT_SLOTS_BIT 3 +# define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT) +# define AC97C_SG (1 << 2) +# define AC97C_SYNC (1 << 1) +# define AC97C_RESET (1 << 0) +#define AC97C_STATUS 0xB0000004 +# define AC97C_XU (1 << 11) +# define AC97C_XO (1 << 10) +# define AC97C_RU (1 << 9) +# define AC97C_RO (1 << 8) +# define AC97C_READY (1 << 7) +# define AC97C_CP (1 << 6) +# define AC97C_TR (1 << 5) +# define AC97C_TE (1 << 4) +# define AC97C_TF (1 << 3) +# define AC97C_RR (1 << 2) +# define AC97C_RE (1 << 1) +# define AC97C_RF (1 << 0) +#define AC97C_DATA 0xB0000008 +#define AC97C_CMD 0xB000000C +# define AC97C_WD_BIT 16 +# define AC97C_READ (1 << 7) +# define AC97C_INDEX_MASK 0x7f +#define AC97C_CNTRL 0xB0000010 +# define AC97C_RS (1 << 1) +# define AC97C_CE (1 << 0) + +/* Secure Digital (SD) Controller */ +#define SD0_XMIT_FIFO 0xB0600000 +#define SD0_RECV_FIFO 0xB0600004 +#define SD1_XMIT_FIFO 0xB0680000 +#define SD1_RECV_FIFO 0xB0680004 + +#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) +/* Au1500 PCI Controller */ +#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */ +#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0) +#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4) +# define PCI_ERROR ((1 << 22) | (1 << 23) | (1 << 24) | \ + (1 << 25) | (1 << 26) | (1 << 27)) +#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8) +#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC) +#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10) +#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14) +#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18) +#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C) +#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20) +#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100) +#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104) +#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108) +#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C) +#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110) + +#define Au1500_PCI_HDR 0xB4005100 /* virtual, KSEG1 addr */ + +/* + * All of our structures, like PCI resource, have 32-bit members. + * Drivers are expected to do an ioremap on the PCI MEM resource, but it's + * hard to store 0x4 0000 0000 in a 32-bit type. We require a small patch + * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and + * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM + * addresses. For PCI I/O, it's simpler because we get to do the ioremap + * ourselves and then adjust the device's resources. + */ +#define Au1500_EXT_CFG 0x600000000ULL +#define Au1500_EXT_CFG_TYPE1 0x680000000ULL +#define Au1500_PCI_IO_START 0x500000000ULL +#define Au1500_PCI_IO_END 0x5000FFFFFULL +#define Au1500_PCI_MEM_START 0x440000000ULL +#define Au1500_PCI_MEM_END 0x44FFFFFFFULL + +#define PCI_IO_START 0x00001000 +#define PCI_IO_END 0x000FFFFF +#define PCI_MEM_START 0x40000000 +#define PCI_MEM_END 0x4FFFFFFF + +#define PCI_FIRST_DEVFN (0 << 3) +#define PCI_LAST_DEVFN (19 << 3) + +#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */ +#define IOPORT_RESOURCE_END 0xffffffff +#define IOMEM_RESOURCE_START 0x10000000 +#define IOMEM_RESOURCE_END 0xffffffff + +#else /* Au1000 and Au1100 and Au1200 */ + +/* Don't allow any legacy ports probing */ +#define IOPORT_RESOURCE_START 0x10000000 +#define IOPORT_RESOURCE_END 0xffffffff +#define IOMEM_RESOURCE_START 0x10000000 +#define IOMEM_RESOURCE_END 0xffffffff + +#define PCI_IO_START 0 +#define PCI_IO_END 0 +#define PCI_MEM_START 0 +#define PCI_MEM_END 0 +#define PCI_FIRST_DEVFN 0 +#define PCI_LAST_DEVFN 0 + +#endif + +#ifndef _LANGUAGE_ASSEMBLY +typedef volatile struct { + /* 0x0000 */ u32 toytrim; + /* 0x0004 */ u32 toywrite; + /* 0x0008 */ u32 toymatch0; + /* 0x000C */ u32 toymatch1; + /* 0x0010 */ u32 toymatch2; + /* 0x0014 */ u32 cntrctrl; + /* 0x0018 */ u32 scratch0; + /* 0x001C */ u32 scratch1; + /* 0x0020 */ u32 freqctrl0; + /* 0x0024 */ u32 freqctrl1; + /* 0x0028 */ u32 clksrc; + /* 0x002C */ u32 pinfunc; + /* 0x0030 */ u32 reserved0; + /* 0x0034 */ u32 wakemsk; + /* 0x0038 */ u32 endian; + /* 0x003C */ u32 powerctrl; + /* 0x0040 */ u32 toyread; + /* 0x0044 */ u32 rtctrim; + /* 0x0048 */ u32 rtcwrite; + /* 0x004C */ u32 rtcmatch0; + /* 0x0050 */ u32 rtcmatch1; + /* 0x0054 */ u32 rtcmatch2; + /* 0x0058 */ u32 rtcread; + /* 0x005C */ u32 wakesrc; + /* 0x0060 */ u32 cpupll; + /* 0x0064 */ u32 auxpll; + /* 0x0068 */ u32 reserved1; + /* 0x006C */ u32 reserved2; + /* 0x0070 */ u32 reserved3; + /* 0x0074 */ u32 reserved4; + /* 0x0078 */ u32 slppwr; + /* 0x007C */ u32 sleep; + /* 0x0080 */ u32 reserved5[32]; + /* 0x0100 */ u32 trioutrd; +#define trioutclr trioutrd + /* 0x0104 */ u32 reserved6; + /* 0x0108 */ u32 outputrd; +#define outputset outputrd + /* 0x010C */ u32 outputclr; + /* 0x0110 */ u32 pinstaterd; +#define pininputen pinstaterd +} AU1X00_SYS; + +static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE; + +#endif + +/* + * Processor information based on PRID. + * Copied from PowerPC. + */ +#ifndef _LANGUAGE_ASSEMBLY +struct cpu_spec { + /* CPU is matched via (PRID & prid_mask) == prid_value */ + unsigned int prid_mask; + unsigned int prid_value; + + char *cpu_name; + unsigned char cpu_od; /* Set Config[OD] */ + unsigned char cpu_bclk; /* Enable BCLK switching */ + unsigned char cpu_pll_wo; /* sys_cpupll reg. write-only */ +}; + +extern struct cpu_spec cpu_specs[]; +extern struct cpu_spec *cur_cpu_spec[]; +#endif + +#endif diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h new file mode 100644 index 000000000000..c333b4e1cd44 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h @@ -0,0 +1,458 @@ +/* + * BRIEF MODULE DESCRIPTION + * Defines for using and allocating DMA channels on the Alchemy + * Au1x00 MIPS processors. + * + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#ifndef __ASM_AU1000_DMA_H +#define __ASM_AU1000_DMA_H + +#include <linux/io.h> /* need byte IO */ +#include <linux/spinlock.h> /* And spinlocks */ +#include <linux/delay.h> +#include <asm/system.h> + +#define NUM_AU1000_DMA_CHANNELS 8 + +/* DMA Channel Base Addresses */ +#define DMA_CHANNEL_BASE 0xB4002000 +#define DMA_CHANNEL_LEN 0x00000100 + +/* DMA Channel Register Offsets */ +#define DMA_MODE_SET 0x00000000 +#define DMA_MODE_READ DMA_MODE_SET +#define DMA_MODE_CLEAR 0x00000004 +/* DMA Mode register bits follow */ +#define DMA_DAH_MASK (0x0f << 20) +#define DMA_DID_BIT 16 +#define DMA_DID_MASK (0x0f << DMA_DID_BIT) +#define DMA_DS (1 << 15) +#define DMA_BE (1 << 13) +#define DMA_DR (1 << 12) +#define DMA_TS8 (1 << 11) +#define DMA_DW_BIT 9 +#define DMA_DW_MASK (0x03 << DMA_DW_BIT) +#define DMA_DW8 (0 << DMA_DW_BIT) +#define DMA_DW16 (1 << DMA_DW_BIT) +#define DMA_DW32 (2 << DMA_DW_BIT) +#define DMA_NC (1 << 8) +#define DMA_IE (1 << 7) +#define DMA_HALT (1 << 6) +#define DMA_GO (1 << 5) +#define DMA_AB (1 << 4) +#define DMA_D1 (1 << 3) +#define DMA_BE1 (1 << 2) +#define DMA_D0 (1 << 1) +#define DMA_BE0 (1 << 0) + +#define DMA_PERIPHERAL_ADDR 0x00000008 +#define DMA_BUFFER0_START 0x0000000C +#define DMA_BUFFER1_START 0x00000014 +#define DMA_BUFFER0_COUNT 0x00000010 +#define DMA_BUFFER1_COUNT 0x00000018 +#define DMA_BAH_BIT 16 +#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT) +#define DMA_COUNT_BIT 0 +#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT) + +/* DMA Device IDs follow */ +enum { + DMA_ID_UART0_TX = 0, + DMA_ID_UART0_RX, + DMA_ID_GP04, + DMA_ID_GP05, + DMA_ID_AC97C_TX, + DMA_ID_AC97C_RX, + DMA_ID_UART3_TX, + DMA_ID_UART3_RX, + DMA_ID_USBDEV_EP0_RX, + DMA_ID_USBDEV_EP0_TX, + DMA_ID_USBDEV_EP2_TX, + DMA_ID_USBDEV_EP3_TX, + DMA_ID_USBDEV_EP4_RX, + DMA_ID_USBDEV_EP5_RX, + DMA_ID_I2S_TX, + DMA_ID_I2S_RX, + DMA_NUM_DEV +}; + +/* DMA Device ID's for 2nd bank (AU1100) follow */ +enum { + DMA_ID_SD0_TX = 0, + DMA_ID_SD0_RX, + DMA_ID_SD1_TX, + DMA_ID_SD1_RX, + DMA_NUM_DEV_BANK2 +}; + +struct dma_chan { + int dev_id; /* this channel is allocated if >= 0, */ + /* free otherwise */ + unsigned int io; + const char *dev_str; + int irq; + void *irq_dev; + unsigned int fifo_addr; + unsigned int mode; +}; + +/* These are in arch/mips/au1000/common/dma.c */ +extern struct dma_chan au1000_dma_table[]; +extern int request_au1000_dma(int dev_id, + const char *dev_str, + irq_handler_t irqhandler, + unsigned long irqflags, + void *irq_dev_id); +extern void free_au1000_dma(unsigned int dmanr); +extern int au1000_dma_read_proc(char *buf, char **start, off_t fpos, + int length, int *eof, void *data); +extern void dump_au1000_dma_channel(unsigned int dmanr); +extern spinlock_t au1000_dma_spin_lock; + +static inline struct dma_chan *get_dma_chan(unsigned int dmanr) +{ + if (dmanr >= NUM_AU1000_DMA_CHANNELS || + au1000_dma_table[dmanr].dev_id < 0) + return NULL; + return &au1000_dma_table[dmanr]; +} + +static inline unsigned long claim_dma_lock(void) +{ + unsigned long flags; + + spin_lock_irqsave(&au1000_dma_spin_lock, flags); + return flags; +} + +static inline void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&au1000_dma_spin_lock, flags); +} + +/* + * Set the DMA buffer enable bits in the mode register. + */ +static inline void enable_dma_buffer0(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(DMA_BE0, chan->io + DMA_MODE_SET); +} + +static inline void enable_dma_buffer1(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(DMA_BE1, chan->io + DMA_MODE_SET); +} +static inline void enable_dma_buffers(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET); +} + +static inline void start_dma(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(DMA_GO, chan->io + DMA_MODE_SET); +} + +#define DMA_HALT_POLL 0x5000 + +static inline void halt_dma(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + int i; + + if (!chan) + return; + au_writel(DMA_GO, chan->io + DMA_MODE_CLEAR); + + /* Poll the halt bit */ + for (i = 0; i < DMA_HALT_POLL; i++) + if (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) + break; + if (i == DMA_HALT_POLL) + printk(KERN_INFO "halt_dma: HALT poll expired!\n"); +} + +static inline void disable_dma(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + + halt_dma(dmanr); + + /* Now we can disable the buffers */ + au_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR); +} + +static inline int dma_halted(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return 1; + return (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0; +} + +/* Initialize a DMA channel. */ +static inline void init_dma(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + u32 mode; + + if (!chan) + return; + + disable_dma(dmanr); + + /* Set device FIFO address */ + au_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR); + + mode = chan->mode | (chan->dev_id << DMA_DID_BIT); + if (chan->irq) + mode |= DMA_IE; + + au_writel(~mode, chan->io + DMA_MODE_CLEAR); + au_writel(mode, chan->io + DMA_MODE_SET); +} + +/* + * Set mode for a specific DMA channel + */ +static inline void set_dma_mode(unsigned int dmanr, unsigned int mode) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + /* + * set_dma_mode is only allowed to change endianess, direction, + * transfer size, device FIFO width, and coherency settings. + * Make sure anything else is masked off. + */ + mode &= (DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC); + chan->mode &= ~(DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC); + chan->mode |= mode; +} + +static inline unsigned int get_dma_mode(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return 0; + return chan->mode; +} + +static inline int get_dma_active_buffer(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return -1; + return (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0; +} + +/* + * Set the device FIFO address for a specific DMA channel - only + * applicable to GPO4 and GPO5. All the other devices have fixed + * FIFO addresses. + */ +static inline void set_dma_fifo_addr(unsigned int dmanr, unsigned int a) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + + if (chan->mode & DMA_DS) /* second bank of device IDs */ + return; + + if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05) + return; + + au_writel(CPHYSADDR(a), chan->io + DMA_PERIPHERAL_ADDR); +} + +/* + * Clear the DMA buffer done bits in the mode register. + */ +static inline void clear_dma_done0(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(DMA_D0, chan->io + DMA_MODE_CLEAR); +} + +static inline void clear_dma_done1(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(DMA_D1, chan->io + DMA_MODE_CLEAR); +} + +/* + * This does nothing - not applicable to Au1000 DMA. + */ +static inline void set_dma_page(unsigned int dmanr, char pagenr) +{ +} + +/* + * Set Buffer 0 transfer address for specific DMA channel. + */ +static inline void set_dma_addr0(unsigned int dmanr, unsigned int a) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(a, chan->io + DMA_BUFFER0_START); +} + +/* + * Set Buffer 1 transfer address for specific DMA channel. + */ +static inline void set_dma_addr1(unsigned int dmanr, unsigned int a) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(a, chan->io + DMA_BUFFER1_START); +} + + +/* + * Set Buffer 0 transfer size (max 64k) for a specific DMA channel. + */ +static inline void set_dma_count0(unsigned int dmanr, unsigned int count) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + count &= DMA_COUNT_MASK; + au_writel(count, chan->io + DMA_BUFFER0_COUNT); +} + +/* + * Set Buffer 1 transfer size (max 64k) for a specific DMA channel. + */ +static inline void set_dma_count1(unsigned int dmanr, unsigned int count) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + count &= DMA_COUNT_MASK; + au_writel(count, chan->io + DMA_BUFFER1_COUNT); +} + +/* + * Set both buffer transfer sizes (max 64k) for a specific DMA channel. + */ +static inline void set_dma_count(unsigned int dmanr, unsigned int count) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + count &= DMA_COUNT_MASK; + au_writel(count, chan->io + DMA_BUFFER0_COUNT); + au_writel(count, chan->io + DMA_BUFFER1_COUNT); +} + +/* + * Returns which buffer has its done bit set in the mode register. + * Returns -1 if neither or both done bits set. + */ +static inline unsigned int get_dma_buffer_done(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return 0; + return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1); +} + + +/* + * Returns the DMA channel's Buffer Done IRQ number. + */ +static inline int get_dma_done_irq(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return -1; + return chan->irq; +} + +/* + * Get DMA residue count. Returns the number of _bytes_ left to transfer. + */ +static inline int get_dma_residue(unsigned int dmanr) +{ + int curBufCntReg, count; + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return 0; + + curBufCntReg = (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? + DMA_BUFFER1_COUNT : DMA_BUFFER0_COUNT; + + count = au_readl(chan->io + curBufCntReg) & DMA_COUNT_MASK; + + if ((chan->mode & DMA_DW_MASK) == DMA_DW16) + count <<= 1; + else if ((chan->mode & DMA_DW_MASK) == DMA_DW32) + count <<= 2; + + return count; +} + +#endif /* __ASM_AU1000_DMA_H */ diff --git a/arch/mips/include/asm/mach-au1x00/au1000_gpio.h b/arch/mips/include/asm/mach-au1x00/au1000_gpio.h new file mode 100644 index 000000000000..d8c96fda5549 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1000_gpio.h @@ -0,0 +1,56 @@ +/* + * FILE NAME au1000_gpio.h + * + * BRIEF MODULE DESCRIPTION + * API to Alchemy Au1xx0 GPIO device. + * + * Author: MontaVista Software, Inc. <source@mvista.com> + * Steve Longerbeam + * + * Copyright 2001, 2008 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __AU1000_GPIO_H +#define __AU1000_GPIO_H + +#include <linux/ioctl.h> + +#define AU1000GPIO_IOC_MAGIC 'A' + +#define AU1000GPIO_IN _IOR(AU1000GPIO_IOC_MAGIC, 0, int) +#define AU1000GPIO_SET _IOW(AU1000GPIO_IOC_MAGIC, 1, int) +#define AU1000GPIO_CLEAR _IOW(AU1000GPIO_IOC_MAGIC, 2, int) +#define AU1000GPIO_OUT _IOW(AU1000GPIO_IOC_MAGIC, 3, int) +#define AU1000GPIO_TRISTATE _IOW(AU1000GPIO_IOC_MAGIC, 4, int) +#define AU1000GPIO_AVAIL_MASK _IOR(AU1000GPIO_IOC_MAGIC, 5, int) + +#ifdef __KERNEL__ +extern u32 get_au1000_avail_gpio_mask(void); +extern int au1000gpio_tristate(u32 data); +extern int au1000gpio_in(u32 *data); +extern int au1000gpio_set(u32 data); +extern int au1000gpio_clear(u32 data); +extern int au1000gpio_out(u32 data); +#endif + +#endif diff --git a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h new file mode 100644 index 000000000000..c35e20918490 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h @@ -0,0 +1,208 @@ +/* + * BRIEF MODULE DESCRIPTION + * Defines for using the MMC/SD controllers on the + * Alchemy Au1100 mips processor. + * + * Copyright (c) 2003 Embedded Edge, LLC. + * Author: Embedded Edge, LLC. + * dan@embeddededge.com or tim@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +/* + * AU1100 MMC/SD definitions. + * + * From "AMD Alchemy Solutions Au1100 Processor Data Book - Preliminary" + * June, 2003 + */ + +#ifndef __ASM_AU1100_MMC_H +#define __ASM_AU1100_MMC_H + +#include <linux/leds.h> + +struct au1xmmc_platform_data { + int(*cd_setup)(void *mmc_host, int on); + int(*card_inserted)(void *mmc_host); + int(*card_readonly)(void *mmc_host); + void(*set_power)(void *mmc_host, int state); + struct led_classdev *led; +}; + +#define SD0_BASE 0xB0600000 +#define SD1_BASE 0xB0680000 + + +/* + * Register offsets. + */ +#define SD_TXPORT (0x0000) +#define SD_RXPORT (0x0004) +#define SD_CONFIG (0x0008) +#define SD_ENABLE (0x000C) +#define SD_CONFIG2 (0x0010) +#define SD_BLKSIZE (0x0014) +#define SD_STATUS (0x0018) +#define SD_DEBUG (0x001C) +#define SD_CMD (0x0020) +#define SD_CMDARG (0x0024) +#define SD_RESP3 (0x0028) +#define SD_RESP2 (0x002C) +#define SD_RESP1 (0x0030) +#define SD_RESP0 (0x0034) +#define SD_TIMEOUT (0x0038) + + +/* + * SD_TXPORT bit definitions. + */ +#define SD_TXPORT_TXD (0x000000ff) + + +/* + * SD_RXPORT bit definitions. + */ +#define SD_RXPORT_RXD (0x000000ff) + + +/* + * SD_CONFIG bit definitions. + */ +#define SD_CONFIG_DIV (0x000001ff) +#define SD_CONFIG_DE (0x00000200) +#define SD_CONFIG_NE (0x00000400) +#define SD_CONFIG_TU (0x00000800) +#define SD_CONFIG_TO (0x00001000) +#define SD_CONFIG_RU (0x00002000) +#define SD_CONFIG_RO (0x00004000) +#define SD_CONFIG_I (0x00008000) +#define SD_CONFIG_CR (0x00010000) +#define SD_CONFIG_RAT (0x00020000) +#define SD_CONFIG_DD (0x00040000) +#define SD_CONFIG_DT (0x00080000) +#define SD_CONFIG_SC (0x00100000) +#define SD_CONFIG_RC (0x00200000) +#define SD_CONFIG_WC (0x00400000) +#define SD_CONFIG_xxx (0x00800000) +#define SD_CONFIG_TH (0x01000000) +#define SD_CONFIG_TE (0x02000000) +#define SD_CONFIG_TA (0x04000000) +#define SD_CONFIG_RH (0x08000000) +#define SD_CONFIG_RA (0x10000000) +#define SD_CONFIG_RF (0x20000000) +#define SD_CONFIG_CD (0x40000000) +#define SD_CONFIG_SI (0x80000000) + + +/* + * SD_ENABLE bit definitions. + */ +#define SD_ENABLE_CE (0x00000001) +#define SD_ENABLE_R (0x00000002) + + +/* + * SD_CONFIG2 bit definitions. + */ +#define SD_CONFIG2_EN (0x00000001) +#define SD_CONFIG2_FF (0x00000002) +#define SD_CONFIG2_xx1 (0x00000004) +#define SD_CONFIG2_DF (0x00000008) +#define SD_CONFIG2_DC (0x00000010) +#define SD_CONFIG2_xx2 (0x000000e0) +#define SD_CONFIG2_WB (0x00000100) +#define SD_CONFIG2_RW (0x00000200) + + +/* + * SD_BLKSIZE bit definitions. + */ +#define SD_BLKSIZE_BS (0x000007ff) +#define SD_BLKSIZE_BS_SHIFT (0) +#define SD_BLKSIZE_BC (0x01ff0000) +#define SD_BLKSIZE_BC_SHIFT (16) + + +/* + * SD_STATUS bit definitions. + */ +#define SD_STATUS_DCRCW (0x00000007) +#define SD_STATUS_xx1 (0x00000008) +#define SD_STATUS_CB (0x00000010) +#define SD_STATUS_DB (0x00000020) +#define SD_STATUS_CF (0x00000040) +#define SD_STATUS_D3 (0x00000080) +#define SD_STATUS_xx2 (0x00000300) +#define SD_STATUS_NE (0x00000400) +#define SD_STATUS_TU (0x00000800) +#define SD_STATUS_TO (0x00001000) +#define SD_STATUS_RU (0x00002000) +#define SD_STATUS_RO (0x00004000) +#define SD_STATUS_I (0x00008000) +#define SD_STATUS_CR (0x00010000) +#define SD_STATUS_RAT (0x00020000) +#define SD_STATUS_DD (0x00040000) +#define SD_STATUS_DT (0x00080000) +#define SD_STATUS_SC (0x00100000) +#define SD_STATUS_RC (0x00200000) +#define SD_STATUS_WC (0x00400000) +#define SD_STATUS_xx3 (0x00800000) +#define SD_STATUS_TH (0x01000000) +#define SD_STATUS_TE (0x02000000) +#define SD_STATUS_TA (0x04000000) +#define SD_STATUS_RH (0x08000000) +#define SD_STATUS_RA (0x10000000) +#define SD_STATUS_RF (0x20000000) +#define SD_STATUS_CD (0x40000000) +#define SD_STATUS_SI (0x80000000) + + +/* + * SD_CMD bit definitions. + */ +#define SD_CMD_GO (0x00000001) +#define SD_CMD_RY (0x00000002) +#define SD_CMD_xx1 (0x0000000c) +#define SD_CMD_CT_MASK (0x000000f0) +#define SD_CMD_CT_0 (0x00000000) +#define SD_CMD_CT_1 (0x00000010) +#define SD_CMD_CT_2 (0x00000020) +#define SD_CMD_CT_3 (0x00000030) +#define SD_CMD_CT_4 (0x00000040) +#define SD_CMD_CT_5 (0x00000050) +#define SD_CMD_CT_6 (0x00000060) +#define SD_CMD_CT_7 (0x00000070) +#define SD_CMD_CI (0x0000ff00) +#define SD_CMD_CI_SHIFT (8) +#define SD_CMD_RT_MASK (0x00ff0000) +#define SD_CMD_RT_0 (0x00000000) +#define SD_CMD_RT_1 (0x00010000) +#define SD_CMD_RT_2 (0x00020000) +#define SD_CMD_RT_3 (0x00030000) +#define SD_CMD_RT_4 (0x00040000) +#define SD_CMD_RT_5 (0x00050000) +#define SD_CMD_RT_6 (0x00060000) +#define SD_CMD_RT_1B (0x00810000) + + +#endif /* __ASM_AU1100_MMC_H */ + diff --git a/arch/mips/include/asm/mach-au1x00/au1550_spi.h b/arch/mips/include/asm/mach-au1x00/au1550_spi.h new file mode 100644 index 000000000000..08e1958e9410 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1550_spi.h @@ -0,0 +1,15 @@ +/* + * au1550_spi.h - Au1550 PSC SPI controller driver - platform data structure + */ + +#ifndef _AU1550_SPI_H_ +#define _AU1550_SPI_H_ + +struct au1550_spi_info { + u32 mainclk_hz; /* main input clock frequency of PSC */ + u16 num_chipselect; /* number of chipselects supported */ + void (*activate_cs)(struct au1550_spi_info *spi, int cs, int polarity); + void (*deactivate_cs)(struct au1550_spi_info *spi, int cs, int polarity); +}; + +#endif diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx.h b/arch/mips/include/asm/mach-au1x00/au1xxx.h new file mode 100644 index 000000000000..1b3655090ed3 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1xxx.h @@ -0,0 +1,43 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _AU1XXX_H_ +#define _AU1XXX_H_ + +#include <asm/mach-au1x00/au1000.h> + +#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \ + defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) +#include <asm/mach-db1x00/db1x00.h> + +#elif defined(CONFIG_MIPS_PB1550) +#include <asm/mach-pb1x00/pb1550.h> + +#elif defined(CONFIG_MIPS_PB1200) +#include <asm/mach-pb1x00/pb1200.h> + +#elif defined(CONFIG_MIPS_DB1200) +#include <asm/mach-db1x00/db1200.h> + +#endif + +#endif /* _AU1XXX_H_ */ diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h new file mode 100644 index 000000000000..44a67bf05dc1 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -0,0 +1,386 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Include file for Alchemy Semiconductor's Au1550 Descriptor + * Based DMA Controller. + * + * Copyright 2004 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Specifics for the Au1xxx Descriptor-Based DMA Controller, + * first seen in the AU1550 part. + */ +#ifndef _AU1000_DBDMA_H_ +#define _AU1000_DBDMA_H_ + +#ifndef _LANGUAGE_ASSEMBLY + +/* + * The DMA base addresses. + * The channels are every 256 bytes (0x0100) from the channel 0 base. + * Interrupt status/enable is bits 15:0 for channels 15 to zero. + */ +#define DDMA_GLOBAL_BASE 0xb4003000 +#define DDMA_CHANNEL_BASE 0xb4002000 + +typedef volatile struct dbdma_global { + u32 ddma_config; + u32 ddma_intstat; + u32 ddma_throttle; + u32 ddma_inten; +} dbdma_global_t; + +/* General Configuration. */ +#define DDMA_CONFIG_AF (1 << 2) +#define DDMA_CONFIG_AH (1 << 1) +#define DDMA_CONFIG_AL (1 << 0) + +#define DDMA_THROTTLE_EN (1 << 31) + +/* The structure of a DMA Channel. */ +typedef volatile struct au1xxx_dma_channel { + u32 ddma_cfg; /* See below */ + u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */ + u32 ddma_statptr; /* word aligned pointer to status word */ + u32 ddma_dbell; /* A write activates channel operation */ + u32 ddma_irq; /* If bit 0 set, interrupt pending */ + u32 ddma_stat; /* See below */ + u32 ddma_bytecnt; /* Byte count, valid only when chan idle */ + /* Remainder, up to the 256 byte boundary, is reserved. */ +} au1x_dma_chan_t; + +#define DDMA_CFG_SED (1 << 9) /* source DMA level/edge detect */ +#define DDMA_CFG_SP (1 << 8) /* source DMA polarity */ +#define DDMA_CFG_DED (1 << 7) /* destination DMA level/edge detect */ +#define DDMA_CFG_DP (1 << 6) /* destination DMA polarity */ +#define DDMA_CFG_SYNC (1 << 5) /* Sync static bus controller */ +#define DDMA_CFG_PPR (1 << 4) /* PCI posted read/write control */ +#define DDMA_CFG_DFN (1 << 3) /* Descriptor fetch non-coherent */ +#define DDMA_CFG_SBE (1 << 2) /* Source big endian */ +#define DDMA_CFG_DBE (1 << 1) /* Destination big endian */ +#define DDMA_CFG_EN (1 << 0) /* Channel enable */ + +/* + * Always set when descriptor processing done, regardless of + * interrupt enable state. Reflected in global intstat, don't + * clear this until global intstat is read/used. + */ +#define DDMA_IRQ_IN (1 << 0) + +#define DDMA_STAT_DB (1 << 2) /* Doorbell pushed */ +#define DDMA_STAT_V (1 << 1) /* Descriptor valid */ +#define DDMA_STAT_H (1 << 0) /* Channel Halted */ + +/* + * "Standard" DDMA Descriptor. + * Must be 32-byte aligned. + */ +typedef volatile struct au1xxx_ddma_desc { + u32 dscr_cmd0; /* See below */ + u32 dscr_cmd1; /* See below */ + u32 dscr_source0; /* source phys address */ + u32 dscr_source1; /* See below */ + u32 dscr_dest0; /* Destination address */ + u32 dscr_dest1; /* See below */ + u32 dscr_stat; /* completion status */ + u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */ + /* + * First 32 bytes are HW specific!!! + * Lets have some SW data following -- make sure it's 32 bytes. + */ + u32 sw_status; + u32 sw_context; + u32 sw_reserved[6]; +} au1x_ddma_desc_t; + +#define DSCR_CMD0_V (1 << 31) /* Descriptor valid */ +#define DSCR_CMD0_MEM (1 << 30) /* mem-mem transfer */ +#define DSCR_CMD0_SID_MASK (0x1f << 25) /* Source ID */ +#define DSCR_CMD0_DID_MASK (0x1f << 20) /* Destination ID */ +#define DSCR_CMD0_SW_MASK (0x3 << 18) /* Source Width */ +#define DSCR_CMD0_DW_MASK (0x3 << 16) /* Destination Width */ +#define DSCR_CMD0_ARB (0x1 << 15) /* Set for Hi Pri */ +#define DSCR_CMD0_DT_MASK (0x3 << 13) /* Descriptor Type */ +#define DSCR_CMD0_SN (0x1 << 12) /* Source non-coherent */ +#define DSCR_CMD0_DN (0x1 << 11) /* Destination non-coherent */ +#define DSCR_CMD0_SM (0x1 << 10) /* Stride mode */ +#define DSCR_CMD0_IE (0x1 << 8) /* Interrupt Enable */ +#define DSCR_CMD0_SP (0x1 << 4) /* Status pointer select */ +#define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */ +#define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */ + +#define SW_STATUS_INUSE (1 << 0) + +/* Command 0 device IDs. */ +#ifdef CONFIG_SOC_AU1550 +#define DSCR_CMD0_UART0_TX 0 +#define DSCR_CMD0_UART0_RX 1 +#define DSCR_CMD0_UART3_TX 2 +#define DSCR_CMD0_UART3_RX 3 +#define DSCR_CMD0_DMA_REQ0 4 +#define DSCR_CMD0_DMA_REQ1 5 +#define DSCR_CMD0_DMA_REQ2 6 +#define DSCR_CMD0_DMA_REQ3 7 +#define DSCR_CMD0_USBDEV_RX0 8 +#define DSCR_CMD0_USBDEV_TX0 9 +#define DSCR_CMD0_USBDEV_TX1 10 +#define DSCR_CMD0_USBDEV_TX2 11 +#define DSCR_CMD0_USBDEV_RX3 12 +#define DSCR_CMD0_USBDEV_RX4 13 +#define DSCR_CMD0_PSC0_TX 14 +#define DSCR_CMD0_PSC0_RX 15 +#define DSCR_CMD0_PSC1_TX 16 +#define DSCR_CMD0_PSC1_RX 17 +#define DSCR_CMD0_PSC2_TX 18 +#define DSCR_CMD0_PSC2_RX 19 +#define DSCR_CMD0_PSC3_TX 20 +#define DSCR_CMD0_PSC3_RX 21 +#define DSCR_CMD0_PCI_WRITE 22 +#define DSCR_CMD0_NAND_FLASH 23 +#define DSCR_CMD0_MAC0_RX 24 +#define DSCR_CMD0_MAC0_TX 25 +#define DSCR_CMD0_MAC1_RX 26 +#define DSCR_CMD0_MAC1_TX 27 +#endif /* CONFIG_SOC_AU1550 */ + +#ifdef CONFIG_SOC_AU1200 +#define DSCR_CMD0_UART0_TX 0 +#define DSCR_CMD0_UART0_RX 1 +#define DSCR_CMD0_UART1_TX 2 +#define DSCR_CMD0_UART1_RX 3 +#define DSCR_CMD0_DMA_REQ0 4 +#define DSCR_CMD0_DMA_REQ1 5 +#define DSCR_CMD0_MAE_BE 6 +#define DSCR_CMD0_MAE_FE 7 +#define DSCR_CMD0_SDMS_TX0 8 +#define DSCR_CMD0_SDMS_RX0 9 +#define DSCR_CMD0_SDMS_TX1 10 +#define DSCR_CMD0_SDMS_RX1 11 +#define DSCR_CMD0_AES_TX 13 +#define DSCR_CMD0_AES_RX 12 +#define DSCR_CMD0_PSC0_TX 14 +#define DSCR_CMD0_PSC0_RX 15 +#define DSCR_CMD0_PSC1_TX 16 +#define DSCR_CMD0_PSC1_RX 17 +#define DSCR_CMD0_CIM_RXA 18 +#define DSCR_CMD0_CIM_RXB 19 +#define DSCR_CMD0_CIM_RXC 20 +#define DSCR_CMD0_MAE_BOTH 21 +#define DSCR_CMD0_LCD 22 +#define DSCR_CMD0_NAND_FLASH 23 +#define DSCR_CMD0_PSC0_SYNC 24 +#define DSCR_CMD0_PSC1_SYNC 25 +#define DSCR_CMD0_CIM_SYNC 26 +#endif /* CONFIG_SOC_AU1200 */ + +#define DSCR_CMD0_THROTTLE 30 +#define DSCR_CMD0_ALWAYS 31 +#define DSCR_NDEV_IDS 32 +/* This macro is used to find/create custom device types */ +#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \ + ((d) & 0xFF)) +#define DSCR_CUSTOM2DEV_ID(x) ((x) & 0xFF) + +#define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25) +#define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20) + +/* Source/Destination transfer width. */ +#define DSCR_CMD0_BYTE 0 +#define DSCR_CMD0_HALFWORD 1 +#define DSCR_CMD0_WORD 2 + +#define DSCR_CMD0_SW(x) (((x) & 0x3) << 18) +#define DSCR_CMD0_DW(x) (((x) & 0x3) << 16) + +/* DDMA Descriptor Type. */ +#define DSCR_CMD0_STANDARD 0 +#define DSCR_CMD0_LITERAL 1 +#define DSCR_CMD0_CMP_BRANCH 2 + +#define DSCR_CMD0_DT(x) (((x) & 0x3) << 13) + +/* Status Instruction. */ +#define DSCR_CMD0_ST_NOCHANGE 0 /* Don't change */ +#define DSCR_CMD0_ST_CURRENT 1 /* Write current status */ +#define DSCR_CMD0_ST_CMD0 2 /* Write cmd0 with V cleared */ +#define DSCR_CMD0_ST_BYTECNT 3 /* Write remaining byte count */ + +#define DSCR_CMD0_ST(x) (((x) & 0x3) << 0) + +/* Descriptor Command 1. */ +#define DSCR_CMD1_SUPTR_MASK (0xf << 28) /* upper 4 bits of src addr */ +#define DSCR_CMD1_DUPTR_MASK (0xf << 24) /* upper 4 bits of dest addr */ +#define DSCR_CMD1_FL_MASK (0x3 << 22) /* Flag bits */ +#define DSCR_CMD1_BC_MASK (0x3fffff) /* Byte count */ + +/* Flag description. */ +#define DSCR_CMD1_FL_MEM_STRIDE0 0 +#define DSCR_CMD1_FL_MEM_STRIDE1 1 +#define DSCR_CMD1_FL_MEM_STRIDE2 2 + +#define DSCR_CMD1_FL(x) (((x) & 0x3) << 22) + +/* Source1, 1-dimensional stride. */ +#define DSCR_SRC1_STS_MASK (3 << 30) /* Src xfer size */ +#define DSCR_SRC1_SAM_MASK (3 << 28) /* Src xfer movement */ +#define DSCR_SRC1_SB_MASK (0x3fff << 14) /* Block size */ +#define DSCR_SRC1_SB(x) (((x) & 0x3fff) << 14) +#define DSCR_SRC1_SS_MASK (0x3fff << 0) /* Stride */ +#define DSCR_SRC1_SS(x) (((x) & 0x3fff) << 0) + +/* Dest1, 1-dimensional stride. */ +#define DSCR_DEST1_DTS_MASK (3 << 30) /* Dest xfer size */ +#define DSCR_DEST1_DAM_MASK (3 << 28) /* Dest xfer movement */ +#define DSCR_DEST1_DB_MASK (0x3fff << 14) /* Block size */ +#define DSCR_DEST1_DB(x) (((x) & 0x3fff) << 14) +#define DSCR_DEST1_DS_MASK (0x3fff << 0) /* Stride */ +#define DSCR_DEST1_DS(x) (((x) & 0x3fff) << 0) + +#define DSCR_xTS_SIZE1 0 +#define DSCR_xTS_SIZE2 1 +#define DSCR_xTS_SIZE4 2 +#define DSCR_xTS_SIZE8 3 +#define DSCR_SRC1_STS(x) (((x) & 3) << 30) +#define DSCR_DEST1_DTS(x) (((x) & 3) << 30) + +#define DSCR_xAM_INCREMENT 0 +#define DSCR_xAM_DECREMENT 1 +#define DSCR_xAM_STATIC 2 +#define DSCR_xAM_BURST 3 +#define DSCR_SRC1_SAM(x) (((x) & 3) << 28) +#define DSCR_DEST1_DAM(x) (((x) & 3) << 28) + +/* The next descriptor pointer. */ +#define DSCR_NXTPTR_MASK (0x07ffffff) +#define DSCR_NXTPTR(x) ((x) >> 5) +#define DSCR_GET_NXTPTR(x) ((x) << 5) +#define DSCR_NXTPTR_MS (1 << 27) + +/* The number of DBDMA channels. */ +#define NUM_DBDMA_CHANS 16 + +/* + * DDMA API definitions + * FIXME: may not fit to this header file + */ +typedef struct dbdma_device_table { + u32 dev_id; + u32 dev_flags; + u32 dev_tsize; + u32 dev_devwidth; + u32 dev_physaddr; /* If FIFO */ + u32 dev_intlevel; + u32 dev_intpolarity; +} dbdev_tab_t; + + +typedef struct dbdma_chan_config { + spinlock_t lock; + + u32 chan_flags; + u32 chan_index; + dbdev_tab_t *chan_src; + dbdev_tab_t *chan_dest; + au1x_dma_chan_t *chan_ptr; + au1x_ddma_desc_t *chan_desc_base; + au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr; + void *chan_callparam; + void (*chan_callback)(int, void *); +} chan_tab_t; + +#define DEV_FLAGS_INUSE (1 << 0) +#define DEV_FLAGS_ANYUSE (1 << 1) +#define DEV_FLAGS_OUT (1 << 2) +#define DEV_FLAGS_IN (1 << 3) +#define DEV_FLAGS_BURSTABLE (1 << 4) +#define DEV_FLAGS_SYNC (1 << 5) +/* end DDMA API definitions */ + +/* + * External functions for drivers to use. + * Use this to allocate a DBDMA channel. The device IDs are one of + * the DSCR_CMD0 devices IDs, which is usually redefined to a more + * meaningful name. The 'callback' is called during DMA completion + * interrupt. + */ +extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, + void (*callback)(int, void *), + void *callparam); + +#define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS + +/* Set the device width of an in/out FIFO. */ +u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits); + +/* Allocate a ring of descriptors for DBDMA. */ +u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries); + +/* Put buffers on source/destination descriptors. */ +u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags); +u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags); + +/* Get a buffer from the destination descriptor. */ +u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes); + +void au1xxx_dbdma_stop(u32 chanid); +void au1xxx_dbdma_start(u32 chanid); +void au1xxx_dbdma_reset(u32 chanid); +u32 au1xxx_get_dma_residue(u32 chanid); + +void au1xxx_dbdma_chan_free(u32 chanid); +void au1xxx_dbdma_dump(u32 chanid); + +u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr); + +u32 au1xxx_ddma_add_device(dbdev_tab_t *dev); +extern void au1xxx_ddma_del_device(u32 devid); +void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp); + +/* + * Some compatibilty macros -- needed to make changes to API + * without breaking existing drivers. + */ +#define au1xxx_dbdma_put_source(chanid, buf, nbytes) \ + _au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE) +#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) \ + _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags) +#define put_source_flags(chanid, buf, nbytes, flags) \ + au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) + +#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) \ + _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE) +#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) \ + _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags) +#define put_dest_flags(chanid, buf, nbytes, flags) \ + au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) + +/* + * Flags for the put_source/put_dest functions. + */ +#define DDMA_FLAGS_IE (1 << 0) +#define DDMA_FLAGS_NOIE (1 << 1) + +#endif /* _LANGUAGE_ASSEMBLY */ +#endif /* _AU1000_DBDMA_H_ */ diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h new file mode 100644 index 000000000000..60638b8969ba --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h @@ -0,0 +1,194 @@ +/* + * include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005 + * + * BRIEF MODULE DESCRIPTION + * AMD Alchemy Au1xxx IDE interface routines over the Static Bus + * + * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any later + * version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE + * Interface and Linux Device Driver" Application Note. + */ + +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA +#define DMA_WAIT_TIMEOUT 100 +#define NUM_DESCRIPTORS PRD_ENTRIES +#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */ +#define NUM_DESCRIPTORS 2 +#endif + +#ifndef AU1XXX_ATA_RQSIZE +#define AU1XXX_ATA_RQSIZE 128 +#endif + +/* Disable Burstable-Support for DBDMA */ +#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON +#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0 +#endif + +#ifdef CONFIG_PM +/* + * This will enable the device to be powered up when write() or read() + * is called. If this is not defined, the driver will return -EBUSY. + */ +#define WAKE_ON_ACCESS 1 + +typedef struct { + spinlock_t lock; /* Used to block on state transitions */ + au1xxx_power_dev_t *dev; /* Power Managers device structure */ + unsigned stopped; /* Used to signal device is stopped */ +} pm_state; +#endif + +typedef struct { + u32 tx_dev_id, rx_dev_id, target_dev_id; + u32 tx_chan, rx_chan; + void *tx_desc_head, *rx_desc_head; + ide_hwif_t *hwif; +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + ide_drive_t *drive; + struct dbdma_cmd *dma_table_cpu; + dma_addr_t dma_table_dma; +#endif + int irq; + u32 regbase; +#ifdef CONFIG_PM + pm_state pm; +#endif +} _auide_hwif; + +/******************************************************************************/ +/* PIO Mode timing calculation : */ +/* */ +/* Static Bus Spec ATA Spec */ +/* Tcsoe = t1 */ +/* Toecs = t9 */ +/* Twcs = t9 */ +/* Tcsh = t2i | t2 */ +/* Tcsoff = t2i | t2 */ +/* Twp = t2 */ +/* Tcsw = t1 */ +/* Tpm = 0 */ +/* Ta = t1+t2 */ +/******************************************************************************/ + +#define TCSOE_MASK (0x07 << 29) +#define TOECS_MASK (0x07 << 26) +#define TWCS_MASK (0x07 << 28) +#define TCSH_MASK (0x0F << 24) +#define TCSOFF_MASK (0x07 << 20) +#define TWP_MASK (0x3F << 14) +#define TCSW_MASK (0x0F << 10) +#define TPM_MASK (0x0F << 6) +#define TA_MASK (0x3F << 0) +#define TS_MASK (1 << 8) + +/* Timing parameters PIO mode 0 */ +#define SBC_IDE_PIO0_TCSOE (0x04 << 29) +#define SBC_IDE_PIO0_TOECS (0x01 << 26) +#define SBC_IDE_PIO0_TWCS (0x02 << 28) +#define SBC_IDE_PIO0_TCSH (0x08 << 24) +#define SBC_IDE_PIO0_TCSOFF (0x07 << 20) +#define SBC_IDE_PIO0_TWP (0x10 << 14) +#define SBC_IDE_PIO0_TCSW (0x04 << 10) +#define SBC_IDE_PIO0_TPM (0x00 << 6) +#define SBC_IDE_PIO0_TA (0x15 << 0) +/* Timing parameters PIO mode 1 */ +#define SBC_IDE_PIO1_TCSOE (0x03 << 29) +#define SBC_IDE_PIO1_TOECS (0x01 << 26) +#define SBC_IDE_PIO1_TWCS (0x01 << 28) +#define SBC_IDE_PIO1_TCSH (0x06 << 24) +#define SBC_IDE_PIO1_TCSOFF (0x06 << 20) +#define SBC_IDE_PIO1_TWP (0x08 << 14) +#define SBC_IDE_PIO1_TCSW (0x03 << 10) +#define SBC_IDE_PIO1_TPM (0x00 << 6) +#define SBC_IDE_PIO1_TA (0x0B << 0) +/* Timing parameters PIO mode 2 */ +#define SBC_IDE_PIO2_TCSOE (0x05 << 29) +#define SBC_IDE_PIO2_TOECS (0x01 << 26) +#define SBC_IDE_PIO2_TWCS (0x01 << 28) +#define SBC_IDE_PIO2_TCSH (0x07 << 24) +#define SBC_IDE_PIO2_TCSOFF (0x07 << 20) +#define SBC_IDE_PIO2_TWP (0x1F << 14) +#define SBC_IDE_PIO2_TCSW (0x05 << 10) +#define SBC_IDE_PIO2_TPM (0x00 << 6) +#define SBC_IDE_PIO2_TA (0x22 << 0) +/* Timing parameters PIO mode 3 */ +#define SBC_IDE_PIO3_TCSOE (0x05 << 29) +#define SBC_IDE_PIO3_TOECS (0x01 << 26) +#define SBC_IDE_PIO3_TWCS (0x01 << 28) +#define SBC_IDE_PIO3_TCSH (0x0D << 24) +#define SBC_IDE_PIO3_TCSOFF (0x0D << 20) +#define SBC_IDE_PIO3_TWP (0x15 << 14) +#define SBC_IDE_PIO3_TCSW (0x05 << 10) +#define SBC_IDE_PIO3_TPM (0x00 << 6) +#define SBC_IDE_PIO3_TA (0x1A << 0) +/* Timing parameters PIO mode 4 */ +#define SBC_IDE_PIO4_TCSOE (0x04 << 29) +#define SBC_IDE_PIO4_TOECS (0x01 << 26) +#define SBC_IDE_PIO4_TWCS (0x01 << 28) +#define SBC_IDE_PIO4_TCSH (0x04 << 24) +#define SBC_IDE_PIO4_TCSOFF (0x04 << 20) +#define SBC_IDE_PIO4_TWP (0x0D << 14) +#define SBC_IDE_PIO4_TCSW (0x03 << 10) +#define SBC_IDE_PIO4_TPM (0x00 << 6) +#define SBC_IDE_PIO4_TA (0x12 << 0) +/* Timing parameters MDMA mode 0 */ +#define SBC_IDE_MDMA0_TCSOE (0x03 << 29) +#define SBC_IDE_MDMA0_TOECS (0x01 << 26) +#define SBC_IDE_MDMA0_TWCS (0x01 << 28) +#define SBC_IDE_MDMA0_TCSH (0x07 << 24) +#define SBC_IDE_MDMA0_TCSOFF (0x07 << 20) +#define SBC_IDE_MDMA0_TWP (0x0C << 14) +#define SBC_IDE_MDMA0_TCSW (0x03 << 10) +#define SBC_IDE_MDMA0_TPM (0x00 << 6) +#define SBC_IDE_MDMA0_TA (0x0F << 0) +/* Timing parameters MDMA mode 1 */ +#define SBC_IDE_MDMA1_TCSOE (0x05 << 29) +#define SBC_IDE_MDMA1_TOECS (0x01 << 26) +#define SBC_IDE_MDMA1_TWCS (0x01 << 28) +#define SBC_IDE_MDMA1_TCSH (0x05 << 24) +#define SBC_IDE_MDMA1_TCSOFF (0x05 << 20) +#define SBC_IDE_MDMA1_TWP (0x0F << 14) +#define SBC_IDE_MDMA1_TCSW (0x05 << 10) +#define SBC_IDE_MDMA1_TPM (0x00 << 6) +#define SBC_IDE_MDMA1_TA (0x15 << 0) +/* Timing parameters MDMA mode 2 */ +#define SBC_IDE_MDMA2_TCSOE (0x04 << 29) +#define SBC_IDE_MDMA2_TOECS (0x01 << 26) +#define SBC_IDE_MDMA2_TWCS (0x01 << 28) +#define SBC_IDE_MDMA2_TCSH (0x04 << 24) +#define SBC_IDE_MDMA2_TCSOFF (0x04 << 20) +#define SBC_IDE_MDMA2_TWP (0x0D << 14) +#define SBC_IDE_MDMA2_TCSW (0x04 << 10) +#define SBC_IDE_MDMA2_TPM (0x00 << 6) +#define SBC_IDE_MDMA2_TA (0x12 << 0) + +#define SBC_IDE_TIMING(mode) \ + (SBC_IDE_##mode##_TWCS | \ + SBC_IDE_##mode##_TCSH | \ + SBC_IDE_##mode##_TCSOFF | \ + SBC_IDE_##mode##_TWP | \ + SBC_IDE_##mode##_TCSW | \ + SBC_IDE_##mode##_TPM | \ + SBC_IDE_##mode##_TA) diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h new file mode 100644 index 000000000000..892b7f168eb4 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h @@ -0,0 +1,505 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Include file for Alchemy Semiconductor's Au1k CPU. + * + * Copyright 2004 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Specifics for the Au1xxx Programmable Serial Controllers, first + * seen in the AU1550 part. + */ +#ifndef _AU1000_PSC_H_ +#define _AU1000_PSC_H_ + +/* The PSC base addresses. */ +#ifdef CONFIG_SOC_AU1550 +#define PSC0_BASE_ADDR 0xb1a00000 +#define PSC1_BASE_ADDR 0xb1b00000 +#define PSC2_BASE_ADDR 0xb0a00000 +#define PSC3_BASE_ADDR 0xb0b00000 +#endif + +#ifdef CONFIG_SOC_AU1200 +#define PSC0_BASE_ADDR 0xb1a00000 +#define PSC1_BASE_ADDR 0xb1b00000 +#endif + +/* + * The PSC select and control registers are common to all protocols. + */ +#define PSC_SEL_OFFSET 0x00000000 +#define PSC_CTRL_OFFSET 0x00000004 + +#define PSC_SEL_CLK_MASK (3 << 4) +#define PSC_SEL_CLK_INTCLK (0 << 4) +#define PSC_SEL_CLK_EXTCLK (1 << 4) +#define PSC_SEL_CLK_SERCLK (2 << 4) + +#define PSC_SEL_PS_MASK 0x00000007 +#define PSC_SEL_PS_DISABLED 0 +#define PSC_SEL_PS_SPIMODE 2 +#define PSC_SEL_PS_I2SMODE 3 +#define PSC_SEL_PS_AC97MODE 4 +#define PSC_SEL_PS_SMBUSMODE 5 + +#define PSC_CTRL_DISABLE 0 +#define PSC_CTRL_SUSPEND 2 +#define PSC_CTRL_ENABLE 3 + +/* AC97 Registers. */ +#define PSC_AC97CFG_OFFSET 0x00000008 +#define PSC_AC97MSK_OFFSET 0x0000000c +#define PSC_AC97PCR_OFFSET 0x00000010 +#define PSC_AC97STAT_OFFSET 0x00000014 +#define PSC_AC97EVNT_OFFSET 0x00000018 +#define PSC_AC97TXRX_OFFSET 0x0000001c +#define PSC_AC97CDC_OFFSET 0x00000020 +#define PSC_AC97RST_OFFSET 0x00000024 +#define PSC_AC97GPO_OFFSET 0x00000028 +#define PSC_AC97GPI_OFFSET 0x0000002c + +#define AC97_PSC_SEL (AC97_PSC_BASE + PSC_SEL_OFFSET) +#define AC97_PSC_CTRL (AC97_PSC_BASE + PSC_CTRL_OFFSET) +#define PSC_AC97CFG (AC97_PSC_BASE + PSC_AC97CFG_OFFSET) +#define PSC_AC97MSK (AC97_PSC_BASE + PSC_AC97MSK_OFFSET) +#define PSC_AC97PCR (AC97_PSC_BASE + PSC_AC97PCR_OFFSET) +#define PSC_AC97STAT (AC97_PSC_BASE + PSC_AC97STAT_OFFSET) +#define PSC_AC97EVNT (AC97_PSC_BASE + PSC_AC97EVNT_OFFSET) +#define PSC_AC97TXRX (AC97_PSC_BASE + PSC_AC97TXRX_OFFSET) +#define PSC_AC97CDC (AC97_PSC_BASE + PSC_AC97CDC_OFFSET) +#define PSC_AC97RST (AC97_PSC_BASE + PSC_AC97RST_OFFSET) +#define PSC_AC97GPO (AC97_PSC_BASE + PSC_AC97GPO_OFFSET) +#define PSC_AC97GPI (AC97_PSC_BASE + PSC_AC97GPI_OFFSET) + +/* AC97 Config Register. */ +#define PSC_AC97CFG_RT_MASK (3 << 30) +#define PSC_AC97CFG_RT_FIFO1 (0 << 30) +#define PSC_AC97CFG_RT_FIFO2 (1 << 30) +#define PSC_AC97CFG_RT_FIFO4 (2 << 30) +#define PSC_AC97CFG_RT_FIFO8 (3 << 30) + +#define PSC_AC97CFG_TT_MASK (3 << 28) +#define PSC_AC97CFG_TT_FIFO1 (0 << 28) +#define PSC_AC97CFG_TT_FIFO2 (1 << 28) +#define PSC_AC97CFG_TT_FIFO4 (2 << 28) +#define PSC_AC97CFG_TT_FIFO8 (3 << 28) + +#define PSC_AC97CFG_DD_DISABLE (1 << 27) +#define PSC_AC97CFG_DE_ENABLE (1 << 26) +#define PSC_AC97CFG_SE_ENABLE (1 << 25) + +#define PSC_AC97CFG_LEN_MASK (0xf << 21) +#define PSC_AC97CFG_TXSLOT_MASK (0x3ff << 11) +#define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1) +#define PSC_AC97CFG_GE_ENABLE (1) + +/* Enable slots 3-12. */ +#define PSC_AC97CFG_TXSLOT_ENA(x) (1 << (((x) - 3) + 11)) +#define PSC_AC97CFG_RXSLOT_ENA(x) (1 << (((x) - 3) + 1)) + +/* + * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately. + * The only sensible numbers are 7, 9, or possibly 11. Nah, just do the + * arithmetic in the macro. + */ +#define PSC_AC97CFG_SET_LEN(x) (((((x) - 2) / 2) & 0xf) << 21) +#define PSC_AC97CFG_GET_LEN(x) (((((x) >> 21) & 0xf) * 2) + 2) + +/* AC97 Mask Register. */ +#define PSC_AC97MSK_GR (1 << 25) +#define PSC_AC97MSK_CD (1 << 24) +#define PSC_AC97MSK_RR (1 << 13) +#define PSC_AC97MSK_RO (1 << 12) +#define PSC_AC97MSK_RU (1 << 11) +#define PSC_AC97MSK_TR (1 << 10) +#define PSC_AC97MSK_TO (1 << 9) +#define PSC_AC97MSK_TU (1 << 8) +#define PSC_AC97MSK_RD (1 << 5) +#define PSC_AC97MSK_TD (1 << 4) +#define PSC_AC97MSK_ALLMASK (PSC_AC97MSK_GR | PSC_AC97MSK_CD | \ + PSC_AC97MSK_RR | PSC_AC97MSK_RO | \ + PSC_AC97MSK_RU | PSC_AC97MSK_TR | \ + PSC_AC97MSK_TO | PSC_AC97MSK_TU | \ + PSC_AC97MSK_RD | PSC_AC97MSK_TD) + +/* AC97 Protocol Control Register. */ +#define PSC_AC97PCR_RC (1 << 6) +#define PSC_AC97PCR_RP (1 << 5) +#define PSC_AC97PCR_RS (1 << 4) +#define PSC_AC97PCR_TC (1 << 2) +#define PSC_AC97PCR_TP (1 << 1) +#define PSC_AC97PCR_TS (1 << 0) + +/* AC97 Status register (read only). */ +#define PSC_AC97STAT_CB (1 << 26) +#define PSC_AC97STAT_CP (1 << 25) +#define PSC_AC97STAT_CR (1 << 24) +#define PSC_AC97STAT_RF (1 << 13) +#define PSC_AC97STAT_RE (1 << 12) +#define PSC_AC97STAT_RR (1 << 11) +#define PSC_AC97STAT_TF (1 << 10) +#define PSC_AC97STAT_TE (1 << 9) +#define PSC_AC97STAT_TR (1 << 8) +#define PSC_AC97STAT_RB (1 << 5) +#define PSC_AC97STAT_TB (1 << 4) +#define PSC_AC97STAT_DI (1 << 2) +#define PSC_AC97STAT_DR (1 << 1) +#define PSC_AC97STAT_SR (1 << 0) + +/* AC97 Event Register. */ +#define PSC_AC97EVNT_GR (1 << 25) +#define PSC_AC97EVNT_CD (1 << 24) +#define PSC_AC97EVNT_RR (1 << 13) +#define PSC_AC97EVNT_RO (1 << 12) +#define PSC_AC97EVNT_RU (1 << 11) +#define PSC_AC97EVNT_TR (1 << 10) +#define PSC_AC97EVNT_TO (1 << 9) +#define PSC_AC97EVNT_TU (1 << 8) +#define PSC_AC97EVNT_RD (1 << 5) +#define PSC_AC97EVNT_TD (1 << 4) + +/* CODEC Command Register. */ +#define PSC_AC97CDC_RD (1 << 25) +#define PSC_AC97CDC_ID_MASK (3 << 23) +#define PSC_AC97CDC_INDX_MASK (0x7f << 16) +#define PSC_AC97CDC_ID(x) (((x) & 0x03) << 23) +#define PSC_AC97CDC_INDX(x) (((x) & 0x7f) << 16) + +/* AC97 Reset Control Register. */ +#define PSC_AC97RST_RST (1 << 1) +#define PSC_AC97RST_SNC (1 << 0) + +/* PSC in I2S Mode. */ +typedef struct psc_i2s { + u32 psc_sel; + u32 psc_ctrl; + u32 psc_i2scfg; + u32 psc_i2smsk; + u32 psc_i2spcr; + u32 psc_i2sstat; + u32 psc_i2sevent; + u32 psc_i2stxrx; + u32 psc_i2sudf; +} psc_i2s_t; + +#define PSC_I2SCFG_OFFSET 0x08 +#define PSC_I2SMASK_OFFSET 0x0C +#define PSC_I2SPCR_OFFSET 0x10 +#define PSC_I2SSTAT_OFFSET 0x14 +#define PSC_I2SEVENT_OFFSET 0x18 +#define PSC_I2SRXTX_OFFSET 0x1C +#define PSC_I2SUDF_OFFSET 0x20 + +/* I2S Config Register. */ +#define PSC_I2SCFG_RT_MASK (3 << 30) +#define PSC_I2SCFG_RT_FIFO1 (0 << 30) +#define PSC_I2SCFG_RT_FIFO2 (1 << 30) +#define PSC_I2SCFG_RT_FIFO4 (2 << 30) +#define PSC_I2SCFG_RT_FIFO8 (3 << 30) + +#define PSC_I2SCFG_TT_MASK (3 << 28) +#define PSC_I2SCFG_TT_FIFO1 (0 << 28) +#define PSC_I2SCFG_TT_FIFO2 (1 << 28) +#define PSC_I2SCFG_TT_FIFO4 (2 << 28) +#define PSC_I2SCFG_TT_FIFO8 (3 << 28) + +#define PSC_I2SCFG_DD_DISABLE (1 << 27) +#define PSC_I2SCFG_DE_ENABLE (1 << 26) +#define PSC_I2SCFG_SET_WS(x) (((((x) / 2) - 1) & 0x7f) << 16) +#define PSC_I2SCFG_WS(n) ((n & 0xFF) << 16) +#define PSC_I2SCFG_WS_MASK (PSC_I2SCFG_WS(0x3F)) +#define PSC_I2SCFG_WI (1 << 15) + +#define PSC_I2SCFG_DIV_MASK (3 << 13) +#define PSC_I2SCFG_DIV2 (0 << 13) +#define PSC_I2SCFG_DIV4 (1 << 13) +#define PSC_I2SCFG_DIV8 (2 << 13) +#define PSC_I2SCFG_DIV16 (3 << 13) + +#define PSC_I2SCFG_BI (1 << 12) +#define PSC_I2SCFG_BUF (1 << 11) +#define PSC_I2SCFG_MLJ (1 << 10) +#define PSC_I2SCFG_XM (1 << 9) + +/* The word length equation is simply LEN+1. */ +#define PSC_I2SCFG_SET_LEN(x) ((((x) - 1) & 0x1f) << 4) +#define PSC_I2SCFG_GET_LEN(x) ((((x) >> 4) & 0x1f) + 1) + +#define PSC_I2SCFG_LB (1 << 2) +#define PSC_I2SCFG_MLF (1 << 1) +#define PSC_I2SCFG_MS (1 << 0) + +/* I2S Mask Register. */ +#define PSC_I2SMSK_RR (1 << 13) +#define PSC_I2SMSK_RO (1 << 12) +#define PSC_I2SMSK_RU (1 << 11) +#define PSC_I2SMSK_TR (1 << 10) +#define PSC_I2SMSK_TO (1 << 9) +#define PSC_I2SMSK_TU (1 << 8) +#define PSC_I2SMSK_RD (1 << 5) +#define PSC_I2SMSK_TD (1 << 4) +#define PSC_I2SMSK_ALLMASK (PSC_I2SMSK_RR | PSC_I2SMSK_RO | \ + PSC_I2SMSK_RU | PSC_I2SMSK_TR | \ + PSC_I2SMSK_TO | PSC_I2SMSK_TU | \ + PSC_I2SMSK_RD | PSC_I2SMSK_TD) + +/* I2S Protocol Control Register. */ +#define PSC_I2SPCR_RC (1 << 6) +#define PSC_I2SPCR_RP (1 << 5) +#define PSC_I2SPCR_RS (1 << 4) +#define PSC_I2SPCR_TC (1 << 2) +#define PSC_I2SPCR_TP (1 << 1) +#define PSC_I2SPCR_TS (1 << 0) + +/* I2S Status register (read only). */ +#define PSC_I2SSTAT_RF (1 << 13) +#define PSC_I2SSTAT_RE (1 << 12) +#define PSC_I2SSTAT_RR (1 << 11) +#define PSC_I2SSTAT_TF (1 << 10) +#define PSC_I2SSTAT_TE (1 << 9) +#define PSC_I2SSTAT_TR (1 << 8) +#define PSC_I2SSTAT_RB (1 << 5) +#define PSC_I2SSTAT_TB (1 << 4) +#define PSC_I2SSTAT_DI (1 << 2) +#define PSC_I2SSTAT_DR (1 << 1) +#define PSC_I2SSTAT_SR (1 << 0) + +/* I2S Event Register. */ +#define PSC_I2SEVNT_RR (1 << 13) +#define PSC_I2SEVNT_RO (1 << 12) +#define PSC_I2SEVNT_RU (1 << 11) +#define PSC_I2SEVNT_TR (1 << 10) +#define PSC_I2SEVNT_TO (1 << 9) +#define PSC_I2SEVNT_TU (1 << 8) +#define PSC_I2SEVNT_RD (1 << 5) +#define PSC_I2SEVNT_TD (1 << 4) + +/* PSC in SPI Mode. */ +typedef struct psc_spi { + u32 psc_sel; + u32 psc_ctrl; + u32 psc_spicfg; + u32 psc_spimsk; + u32 psc_spipcr; + u32 psc_spistat; + u32 psc_spievent; + u32 psc_spitxrx; +} psc_spi_t; + +/* SPI Config Register. */ +#define PSC_SPICFG_RT_MASK (3 << 30) +#define PSC_SPICFG_RT_FIFO1 (0 << 30) +#define PSC_SPICFG_RT_FIFO2 (1 << 30) +#define PSC_SPICFG_RT_FIFO4 (2 << 30) +#define PSC_SPICFG_RT_FIFO8 (3 << 30) + +#define PSC_SPICFG_TT_MASK (3 << 28) +#define PSC_SPICFG_TT_FIFO1 (0 << 28) +#define PSC_SPICFG_TT_FIFO2 (1 << 28) +#define PSC_SPICFG_TT_FIFO4 (2 << 28) +#define PSC_SPICFG_TT_FIFO8 (3 << 28) + +#define PSC_SPICFG_DD_DISABLE (1 << 27) +#define PSC_SPICFG_DE_ENABLE (1 << 26) +#define PSC_SPICFG_CLR_BAUD(x) ((x) & ~((0x3f) << 15)) +#define PSC_SPICFG_SET_BAUD(x) (((x) & 0x3f) << 15) + +#define PSC_SPICFG_SET_DIV(x) (((x) & 0x03) << 13) +#define PSC_SPICFG_DIV2 0 +#define PSC_SPICFG_DIV4 1 +#define PSC_SPICFG_DIV8 2 +#define PSC_SPICFG_DIV16 3 + +#define PSC_SPICFG_BI (1 << 12) +#define PSC_SPICFG_PSE (1 << 11) +#define PSC_SPICFG_CGE (1 << 10) +#define PSC_SPICFG_CDE (1 << 9) + +#define PSC_SPICFG_CLR_LEN(x) ((x) & ~((0x1f) << 4)) +#define PSC_SPICFG_SET_LEN(x) (((x-1) & 0x1f) << 4) + +#define PSC_SPICFG_LB (1 << 3) +#define PSC_SPICFG_MLF (1 << 1) +#define PSC_SPICFG_MO (1 << 0) + +/* SPI Mask Register. */ +#define PSC_SPIMSK_MM (1 << 16) +#define PSC_SPIMSK_RR (1 << 13) +#define PSC_SPIMSK_RO (1 << 12) +#define PSC_SPIMSK_RU (1 << 11) +#define PSC_SPIMSK_TR (1 << 10) +#define PSC_SPIMSK_TO (1 << 9) +#define PSC_SPIMSK_TU (1 << 8) +#define PSC_SPIMSK_SD (1 << 5) +#define PSC_SPIMSK_MD (1 << 4) +#define PSC_SPIMSK_ALLMASK (PSC_SPIMSK_MM | PSC_SPIMSK_RR | \ + PSC_SPIMSK_RO | PSC_SPIMSK_TO | \ + PSC_SPIMSK_TU | PSC_SPIMSK_SD | \ + PSC_SPIMSK_MD) + +/* SPI Protocol Control Register. */ +#define PSC_SPIPCR_RC (1 << 6) +#define PSC_SPIPCR_SP (1 << 5) +#define PSC_SPIPCR_SS (1 << 4) +#define PSC_SPIPCR_TC (1 << 2) +#define PSC_SPIPCR_MS (1 << 0) + +/* SPI Status register (read only). */ +#define PSC_SPISTAT_RF (1 << 13) +#define PSC_SPISTAT_RE (1 << 12) +#define PSC_SPISTAT_RR (1 << 11) +#define PSC_SPISTAT_TF (1 << 10) +#define PSC_SPISTAT_TE (1 << 9) +#define PSC_SPISTAT_TR (1 << 8) +#define PSC_SPISTAT_SB (1 << 5) +#define PSC_SPISTAT_MB (1 << 4) +#define PSC_SPISTAT_DI (1 << 2) +#define PSC_SPISTAT_DR (1 << 1) +#define PSC_SPISTAT_SR (1 << 0) + +/* SPI Event Register. */ +#define PSC_SPIEVNT_MM (1 << 16) +#define PSC_SPIEVNT_RR (1 << 13) +#define PSC_SPIEVNT_RO (1 << 12) +#define PSC_SPIEVNT_RU (1 << 11) +#define PSC_SPIEVNT_TR (1 << 10) +#define PSC_SPIEVNT_TO (1 << 9) +#define PSC_SPIEVNT_TU (1 << 8) +#define PSC_SPIEVNT_SD (1 << 5) +#define PSC_SPIEVNT_MD (1 << 4) + +/* Transmit register control. */ +#define PSC_SPITXRX_LC (1 << 29) +#define PSC_SPITXRX_SR (1 << 28) + +/* PSC in SMBus (I2C) Mode. */ +typedef struct psc_smb { + u32 psc_sel; + u32 psc_ctrl; + u32 psc_smbcfg; + u32 psc_smbmsk; + u32 psc_smbpcr; + u32 psc_smbstat; + u32 psc_smbevnt; + u32 psc_smbtxrx; + u32 psc_smbtmr; +} psc_smb_t; + +/* SMBus Config Register. */ +#define PSC_SMBCFG_RT_MASK (3 << 30) +#define PSC_SMBCFG_RT_FIFO1 (0 << 30) +#define PSC_SMBCFG_RT_FIFO2 (1 << 30) +#define PSC_SMBCFG_RT_FIFO4 (2 << 30) +#define PSC_SMBCFG_RT_FIFO8 (3 << 30) + +#define PSC_SMBCFG_TT_MASK (3 << 28) +#define PSC_SMBCFG_TT_FIFO1 (0 << 28) +#define PSC_SMBCFG_TT_FIFO2 (1 << 28) +#define PSC_SMBCFG_TT_FIFO4 (2 << 28) +#define PSC_SMBCFG_TT_FIFO8 (3 << 28) + +#define PSC_SMBCFG_DD_DISABLE (1 << 27) +#define PSC_SMBCFG_DE_ENABLE (1 << 26) + +#define PSC_SMBCFG_SET_DIV(x) (((x) & 0x03) << 13) +#define PSC_SMBCFG_DIV2 0 +#define PSC_SMBCFG_DIV4 1 +#define PSC_SMBCFG_DIV8 2 +#define PSC_SMBCFG_DIV16 3 + +#define PSC_SMBCFG_GCE (1 << 9) +#define PSC_SMBCFG_SFM (1 << 8) + +#define PSC_SMBCFG_SET_SLV(x) (((x) & 0x7f) << 1) + +/* SMBus Mask Register. */ +#define PSC_SMBMSK_DN (1 << 30) +#define PSC_SMBMSK_AN (1 << 29) +#define PSC_SMBMSK_AL (1 << 28) +#define PSC_SMBMSK_RR (1 << 13) +#define PSC_SMBMSK_RO (1 << 12) +#define PSC_SMBMSK_RU (1 << 11) +#define PSC_SMBMSK_TR (1 << 10) +#define PSC_SMBMSK_TO (1 << 9) +#define PSC_SMBMSK_TU (1 << 8) +#define PSC_SMBMSK_SD (1 << 5) +#define PSC_SMBMSK_MD (1 << 4) +#define PSC_SMBMSK_ALLMASK (PSC_SMBMSK_DN | PSC_SMBMSK_AN | \ + PSC_SMBMSK_AL | PSC_SMBMSK_RR | \ + PSC_SMBMSK_RO | PSC_SMBMSK_TO | \ + PSC_SMBMSK_TU | PSC_SMBMSK_SD | \ + PSC_SMBMSK_MD) + +/* SMBus Protocol Control Register. */ +#define PSC_SMBPCR_DC (1 << 2) +#define PSC_SMBPCR_MS (1 << 0) + +/* SMBus Status register (read only). */ +#define PSC_SMBSTAT_BB (1 << 28) +#define PSC_SMBSTAT_RF (1 << 13) +#define PSC_SMBSTAT_RE (1 << 12) +#define PSC_SMBSTAT_RR (1 << 11) +#define PSC_SMBSTAT_TF (1 << 10) +#define PSC_SMBSTAT_TE (1 << 9) +#define PSC_SMBSTAT_TR (1 << 8) +#define PSC_SMBSTAT_SB (1 << 5) +#define PSC_SMBSTAT_MB (1 << 4) +#define PSC_SMBSTAT_DI (1 << 2) +#define PSC_SMBSTAT_DR (1 << 1) +#define PSC_SMBSTAT_SR (1 << 0) + +/* SMBus Event Register. */ +#define PSC_SMBEVNT_DN (1 << 30) +#define PSC_SMBEVNT_AN (1 << 29) +#define PSC_SMBEVNT_AL (1 << 28) +#define PSC_SMBEVNT_RR (1 << 13) +#define PSC_SMBEVNT_RO (1 << 12) +#define PSC_SMBEVNT_RU (1 << 11) +#define PSC_SMBEVNT_TR (1 << 10) +#define PSC_SMBEVNT_TO (1 << 9) +#define PSC_SMBEVNT_TU (1 << 8) +#define PSC_SMBEVNT_SD (1 << 5) +#define PSC_SMBEVNT_MD (1 << 4) +#define PSC_SMBEVNT_ALLCLR (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | \ + PSC_SMBEVNT_AL | PSC_SMBEVNT_RR | \ + PSC_SMBEVNT_RO | PSC_SMBEVNT_TO | \ + PSC_SMBEVNT_TU | PSC_SMBEVNT_SD | \ + PSC_SMBEVNT_MD) + +/* Transmit register control. */ +#define PSC_SMBTXRX_RSR (1 << 28) +#define PSC_SMBTXRX_STP (1 << 29) +#define PSC_SMBTXRX_DATAMASK 0xff + +/* SMBus protocol timers register. */ +#define PSC_SMBTMR_SET_TH(x) (((x) & 0x03) << 30) +#define PSC_SMBTMR_SET_PS(x) (((x) & 0x1f) << 25) +#define PSC_SMBTMR_SET_PU(x) (((x) & 0x1f) << 20) +#define PSC_SMBTMR_SET_SH(x) (((x) & 0x1f) << 15) +#define PSC_SMBTMR_SET_SU(x) (((x) & 0x1f) << 10) +#define PSC_SMBTMR_SET_CL(x) (((x) & 0x1f) << 5) +#define PSC_SMBTMR_SET_CH(x) (((x) & 0x1f) << 0) + +#endif /* _AU1000_PSC_H_ */ diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h new file mode 100644 index 000000000000..2dc61e009a08 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/gpio.h @@ -0,0 +1,69 @@ +#ifndef _AU1XXX_GPIO_H_ +#define _AU1XXX_GPIO_H_ + +#include <linux/types.h> + +#define AU1XXX_GPIO_BASE 200 + +struct au1x00_gpio2 { + u32 dir; + u32 reserved; + u32 output; + u32 pinstate; + u32 inten; + u32 enable; +}; + +extern int au1xxx_gpio_get_value(unsigned gpio); +extern void au1xxx_gpio_set_value(unsigned gpio, int value); +extern int au1xxx_gpio_direction_input(unsigned gpio); +extern int au1xxx_gpio_direction_output(unsigned gpio, int value); + + +/* Wrappers for the arch-neutral GPIO API */ + +static inline int gpio_request(unsigned gpio, const char *label) +{ + /* Not yet implemented */ + return 0; +} + +static inline void gpio_free(unsigned gpio) +{ + /* Not yet implemented */ +} + +static inline int gpio_direction_input(unsigned gpio) +{ + return au1xxx_gpio_direction_input(gpio); +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + return au1xxx_gpio_direction_output(gpio, value); +} + +static inline int gpio_get_value(unsigned gpio) +{ + return au1xxx_gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + au1xxx_gpio_set_value(gpio, value); +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return gpio; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return irq; +} + +/* For cansleep */ +#include <asm-generic/gpio.h> + +#endif /* _AU1XXX_GPIO_H_ */ diff --git a/arch/mips/include/asm/mach-au1x00/ioremap.h b/arch/mips/include/asm/mach-au1x00/ioremap.h new file mode 100644 index 000000000000..364cea2dc71f --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/ioremap.h @@ -0,0 +1,42 @@ +/* + * include/asm-mips/mach-au1x00/ioremap.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MACH_AU1X00_IOREMAP_H +#define __ASM_MACH_AU1X00_IOREMAP_H + +#include <linux/types.h> + +#ifdef CONFIG_64BIT_PHYS_ADDR +extern phys_t __fixup_bigphys_addr(phys_t, phys_t); +#else +static inline phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} +#endif + +/* + * Allow physical addresses to be fixed up to help 36-bit peripherals. + */ +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return __fixup_bigphys_addr(phys_addr, size); +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return 0; +} + +#endif /* __ASM_MACH_AU1X00_IOREMAP_H */ diff --git a/arch/mips/include/asm/mach-au1x00/prom.h b/arch/mips/include/asm/mach-au1x00/prom.h new file mode 100644 index 000000000000..e38715577c51 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/prom.h @@ -0,0 +1,13 @@ +#ifndef __AU1X00_PROM_H +#define __AU1X00_PROM_H + +extern int prom_argc; +extern char **prom_argv; +extern char **prom_envp; + +extern void prom_init_cmdline(void); +extern char *prom_getcmdline(void); +extern char *prom_getenv(char *envname); +extern int prom_get_ethernet_addr(char *ethernet_addr); + +#endif diff --git a/arch/mips/include/asm/mach-au1x00/war.h b/arch/mips/include/asm/mach-au1x00/war.h new file mode 100644 index 000000000000..dd57d03d68ba --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_AU1X00_WAR_H +#define __ASM_MIPS_MACH_AU1X00_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_AU1X00_WAR_H */ diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h new file mode 100644 index 000000000000..d008f47a28bd --- /dev/null +++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __ASM_BCM47XX_H +#define __ASM_BCM47XX_H + +/* SSB bus */ +extern struct ssb_bus ssb_bcm47xx; + +#endif /* __ASM_BCM47XX_H */ diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h new file mode 100644 index 000000000000..cfc8f4d618ce --- /dev/null +++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h @@ -0,0 +1,59 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net> + */ + +#ifndef __BCM47XX_GPIO_H +#define __BCM47XX_GPIO_H + +#define BCM47XX_EXTIF_GPIO_LINES 5 +#define BCM47XX_CHIPCO_GPIO_LINES 16 + +extern int bcm47xx_gpio_to_irq(unsigned gpio); +extern int bcm47xx_gpio_get_value(unsigned gpio); +extern void bcm47xx_gpio_set_value(unsigned gpio, int value); +extern int bcm47xx_gpio_direction_input(unsigned gpio); +extern int bcm47xx_gpio_direction_output(unsigned gpio, int value); + +static inline int gpio_request(unsigned gpio, const char *label) +{ + return 0; +} + +static inline void gpio_free(unsigned gpio) +{ +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return bcm47xx_gpio_to_irq(gpio); +} + +static inline int gpio_get_value(unsigned gpio) +{ + return bcm47xx_gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + bcm47xx_gpio_set_value(gpio, value); +} + +static inline int gpio_direction_input(unsigned gpio) +{ + return bcm47xx_gpio_direction_input(gpio); +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + return bcm47xx_gpio_direction_output(gpio, value); +} + + +/* cansleep wrappers */ +#include <asm-generic/gpio.h> + +#endif /* __BCM47XX_GPIO_H */ diff --git a/arch/mips/include/asm/mach-bcm47xx/war.h b/arch/mips/include/asm/mach-bcm47xx/war.h new file mode 100644 index 000000000000..4a2b7986b582 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm47xx/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_BCM947XX_WAR_H +#define __ASM_MIPS_MACH_BCM947XX_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_BCM947XX_WAR_H */ diff --git a/arch/mips/include/asm/mach-cobalt/cobalt.h b/arch/mips/include/asm/mach-cobalt/cobalt.h new file mode 100644 index 000000000000..5b9fce73f11d --- /dev/null +++ b/arch/mips/include/asm/mach-cobalt/cobalt.h @@ -0,0 +1,22 @@ +/* + * The Cobalt board ID information. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997 Cobalt Microserver + * Copyright (C) 1997, 2003 Ralf Baechle + * Copyright (C) 2001, 2002, 2003 Liam Davies (ldavies@agile.tv) + */ +#ifndef __ASM_COBALT_H +#define __ASM_COBALT_H + +extern int cobalt_board_id; + +#define COBALT_BRD_ID_QUBE1 0x3 +#define COBALT_BRD_ID_RAQ1 0x4 +#define COBALT_BRD_ID_QUBE2 0x5 +#define COBALT_BRD_ID_RAQ2 0x6 + +#endif /* __ASM_COBALT_H */ diff --git a/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h new file mode 100644 index 000000000000..b3314cf53194 --- /dev/null +++ b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h @@ -0,0 +1,56 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006, 07 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_COBALT_CPU_FEATURE_OVERRIDES_H +#define __ASM_COBALT_CPU_FEATURE_OVERRIDES_H + + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_fpu 1 +#define cpu_has_32fpr 1 +#define cpu_has_counter 1 +#define cpu_has_watch 0 +#define cpu_has_divec 1 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 0 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 + +#define cpu_has_inclusive_pcaches 0 +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 +#define cpu_scache_line_size() 0 + +#ifdef CONFIG_64BIT +#define cpu_has_llsc 0 +#else +#define cpu_has_llsc 1 +#endif + +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 +#define cpu_has_vtag_icache 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_icache_snoops_remote_store 0 +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_COBALT_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-cobalt/irq.h b/arch/mips/include/asm/mach-cobalt/irq.h new file mode 100644 index 000000000000..57c8c9ac5851 --- /dev/null +++ b/arch/mips/include/asm/mach-cobalt/irq.h @@ -0,0 +1,57 @@ +/* + * Cobalt IRQ definitions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997 Cobalt Microserver + * Copyright (C) 1997, 2003 Ralf Baechle + * Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv) + * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + */ +#ifndef _ASM_COBALT_IRQ_H +#define _ASM_COBALT_IRQ_H + +/* + * i8259 interrupts used on Cobalt: + * + * 8 - RTC + * 9 - PCI slot + * 14 - IDE0 + * 15 - IDE1(no connector on board) + */ +#define I8259A_IRQ_BASE 0 + +#define PCISLOT_IRQ (I8259A_IRQ_BASE + 9) + +/* + * CPU interrupts used on Cobalt: + * + * 0 - Software interrupt 0 (unused) + * 1 - Software interrupt 0 (unused) + * 2 - cascade GT64111 + * 3 - ethernet or SCSI host controller + * 4 - ethernet + * 5 - 16550 UART + * 6 - cascade i8259 + * 7 - CP0 counter + */ +#define MIPS_CPU_IRQ_BASE 16 + +#define GT641XX_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 2) +#define RAQ2_SCSI_IRQ (MIPS_CPU_IRQ_BASE + 3) +#define ETH0_IRQ (MIPS_CPU_IRQ_BASE + 3) +#define QUBE1_ETH0_IRQ (MIPS_CPU_IRQ_BASE + 4) +#define ETH1_IRQ (MIPS_CPU_IRQ_BASE + 4) +#define SERIAL_IRQ (MIPS_CPU_IRQ_BASE + 5) +#define SCSI_IRQ (MIPS_CPU_IRQ_BASE + 5) +#define I8259_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 6) + +#define GT641XX_IRQ_BASE 24 + +#include <asm/irq_gt641xx.h> + +#define NR_IRQS (GT641XX_PCI_INT3_IRQ + 1) + +#endif /* _ASM_COBALT_IRQ_H */ diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h new file mode 100644 index 000000000000..ae9c5523c7ef --- /dev/null +++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#ifndef _COBALT_MACH_GT64120_H +#define _COBALT_MACH_GT64120_H + +/* + * Cobalt uses GT64111. GT64111 is almost the same as GT64120. + */ + +#define GT64120_BASE CKSEG1ADDR(GT_DEF_BASE) + +#endif /* _COBALT_MACH_GT64120_H */ diff --git a/arch/mips/include/asm/mach-cobalt/war.h b/arch/mips/include/asm/mach-cobalt/war.h new file mode 100644 index 000000000000..97884fd18ac0 --- /dev/null +++ b/arch/mips/include/asm/mach-cobalt/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_COBALT_WAR_H +#define __ASM_MIPS_MACH_COBALT_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_COBALT_WAR_H */ diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h new file mode 100644 index 000000000000..27f26102b1bb --- /dev/null +++ b/arch/mips/include/asm/mach-db1x00/db1200.h @@ -0,0 +1,230 @@ +/* + * AMD Alchemy DBAu1200 Reference Board + * Board register defines. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_DB1200_H +#define __ASM_DB1200_H + +#include <linux/types.h> +#include <asm/mach-au1x00/au1xxx_psc.h> + +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX + +/* + * SPI and SMB are muxed on the DBAu1200 board. + * Refer to board documentation. + */ +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define SMBUS_PSC_BASE PSC0_BASE_ADDR +/* + * AC'97 and I2S are muxed on the DBAu1200 board. + * Refer to board documentation. + */ +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define I2S_PSC_BASE PSC1_BASE_ADDR + +#define BCSR_KSEG1_ADDR 0xB9800000 + +typedef volatile struct +{ + /*00*/ u16 whoami; + u16 reserved0; + /*04*/ u16 status; + u16 reserved1; + /*08*/ u16 switches; + u16 reserved2; + /*0C*/ u16 resets; + u16 reserved3; + + /*10*/ u16 pcmcia; + u16 reserved4; + /*14*/ u16 board; + u16 reserved5; + /*18*/ u16 disk_leds; + u16 reserved6; + /*1C*/ u16 system; + u16 reserved7; + + /*20*/ u16 intclr; + u16 reserved8; + /*24*/ u16 intset; + u16 reserved9; + /*28*/ u16 intclr_mask; + u16 reserved10; + /*2C*/ u16 intset_mask; + u16 reserved11; + + /*30*/ u16 sig_status; + u16 reserved12; + /*34*/ u16 int_status; + u16 reserved13; + /*38*/ u16 reserved14; + u16 reserved15; + /*3C*/ u16 reserved16; + u16 reserved17; + +} BCSR; + +static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + +/* + * Register bit definitions for the BCSRs + */ +#define BCSR_WHOAMI_DCID 0x000F +#define BCSR_WHOAMI_CPLD 0x00F0 +#define BCSR_WHOAMI_BOARD 0x0F00 + +#define BCSR_STATUS_PCMCIA0VS 0x0003 +#define BCSR_STATUS_PCMCIA1VS 0x000C +#define BCSR_STATUS_SWAPBOOT 0x0040 +#define BCSR_STATUS_FLASHBUSY 0x0100 +#define BCSR_STATUS_IDECBLID 0x0200 +#define BCSR_STATUS_SD0WP 0x0400 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 + +#define BCSR_SWITCHES_OCTAL 0x00FF +#define BCSR_SWITCHES_DIP_1 0x0080 +#define BCSR_SWITCHES_DIP_2 0x0040 +#define BCSR_SWITCHES_DIP_3 0x0020 +#define BCSR_SWITCHES_DIP_4 0x0010 +#define BCSR_SWITCHES_DIP_5 0x0008 +#define BCSR_SWITCHES_DIP_6 0x0004 +#define BCSR_SWITCHES_DIP_7 0x0002 +#define BCSR_SWITCHES_DIP_8 0x0001 +#define BCSR_SWITCHES_ROTARY 0x0F00 + +#define BCSR_RESETS_ETH 0x0001 +#define BCSR_RESETS_CAMERA 0x0002 +#define BCSR_RESETS_DC 0x0004 +#define BCSR_RESETS_IDE 0x0008 +#define BCSR_RESETS_TV 0x0010 +/* Not resets but in the same register */ +#define BCSR_RESETS_PWMR1MUX 0x0800 +#define BCSR_RESETS_PCS0MUX 0x1000 +#define BCSR_RESETS_PCS1MUX 0x2000 +#define BCSR_RESETS_SPISEL 0x4000 + +#define BCSR_PCMCIA_PC0VPP 0x0003 +#define BCSR_PCMCIA_PC0VCC 0x000C +#define BCSR_PCMCIA_PC0DRVEN 0x0010 +#define BCSR_PCMCIA_PC0RST 0x0080 +#define BCSR_PCMCIA_PC1VPP 0x0300 +#define BCSR_PCMCIA_PC1VCC 0x0C00 +#define BCSR_PCMCIA_PC1DRVEN 0x1000 +#define BCSR_PCMCIA_PC1RST 0x8000 + +#define BCSR_BOARD_LCDVEE 0x0001 +#define BCSR_BOARD_LCDVDD 0x0002 +#define BCSR_BOARD_LCDBL 0x0004 +#define BCSR_BOARD_CAMSNAP 0x0010 +#define BCSR_BOARD_CAMPWR 0x0020 +#define BCSR_BOARD_SD0PWR 0x0040 + +#define BCSR_LEDS_DECIMALS 0x0003 +#define BCSR_LEDS_LED0 0x0100 +#define BCSR_LEDS_LED1 0x0200 +#define BCSR_LEDS_LED2 0x0400 +#define BCSR_LEDS_LED3 0x0800 + +#define BCSR_SYSTEM_POWEROFF 0x4000 +#define BCSR_SYSTEM_RESET 0x8000 + +/* Bit positions for the different interrupt sources */ +#define BCSR_INT_IDE 0x0001 +#define BCSR_INT_ETH 0x0002 +#define BCSR_INT_PC0 0x0004 +#define BCSR_INT_PC0STSCHG 0x0008 +#define BCSR_INT_PC1 0x0010 +#define BCSR_INT_PC1STSCHG 0x0020 +#define BCSR_INT_DC 0x0040 +#define BCSR_INT_FLASHBUSY 0x0080 +#define BCSR_INT_PC0INSERT 0x0100 +#define BCSR_INT_PC0EJECT 0x0200 +#define BCSR_INT_PC1INSERT 0x0400 +#define BCSR_INT_PC1EJECT 0x0800 +#define BCSR_INT_SD0INSERT 0x1000 +#define BCSR_INT_SD0EJECT 0x2000 + +#define SMC91C111_PHYS_ADDR 0x19000300 +#define SMC91C111_INT DB1200_ETH_INT + +#define IDE_PHYS_ADDR 0x18800000 +#define IDE_REG_SHIFT 5 +#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT) +#define IDE_INT DB1200_IDE_INT +#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 +#define IDE_RQSIZE 128 + +#define NAND_PHYS_ADDR 0x20000000 + +/* + * External Interrupts for DBAu1200 as of 8/6/2004. + * Bit positions in the CPLD registers can be calculated by taking + * the interrupt define and subtracting the DB1200_INT_BEGIN value. + * + * Example: IDE bis pos is = 64 - 64 + * ETH bit pos is = 65 - 64 + */ +enum external_pb1200_ints { + DB1200_INT_BEGIN = AU1000_MAX_INTR + 1, + + DB1200_IDE_INT = DB1200_INT_BEGIN, + DB1200_ETH_INT, + DB1200_PC0_INT, + DB1200_PC0_STSCHG_INT, + DB1200_PC1_INT, + DB1200_PC1_STSCHG_INT, + DB1200_DC_INT, + DB1200_FLASHBUSY_INT, + DB1200_PC0_INSERT_INT, + DB1200_PC0_EJECT_INT, + DB1200_PC1_INSERT_INT, + DB1200_PC1_EJECT_INT, + DB1200_SD0_INSERT_INT, + DB1200_SD0_EJECT_INT, + + DB1200_INT_END = DB1200_INT_BEGIN + 15, +}; + + +/* + * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c + */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) + +#define BOARD_PC0_INT DB1200_PC0_INT +#define BOARD_PC1_INT DB1200_PC1_INT +#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) + +/* NAND chip select */ +#define NAND_CS 1 + +#endif /* __ASM_DB1200_H */ diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h new file mode 100644 index 000000000000..1a515b8c870f --- /dev/null +++ b/arch/mips/include/asm/mach-db1x00/db1x00.h @@ -0,0 +1,179 @@ +/* + * AMD Alchemy DBAu1x00 Reference Boards + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_DB1X00_H +#define __ASM_DB1X00_H + +#include <asm/mach-au1x00/au1xxx_psc.h> + +#ifdef CONFIG_MIPS_DB1550 + +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX + +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define SMBUS_PSC_BASE PSC2_BASE_ADDR +#define I2S_PSC_BASE PSC3_BASE_ADDR + +#define BCSR_KSEG1_ADDR 0xAF000000 +#define NAND_PHYS_ADDR 0x20000000 + +#else +#define BCSR_KSEG1_ADDR 0xAE000000 +#endif + +/* + * Overlay data structure of the DBAu1x00 board registers. + * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx. + */ +typedef volatile struct +{ + /*00*/ unsigned short whoami; + unsigned short reserved0; + /*04*/ unsigned short status; + unsigned short reserved1; + /*08*/ unsigned short switches; + unsigned short reserved2; + /*0C*/ unsigned short resets; + unsigned short reserved3; + /*10*/ unsigned short pcmcia; + unsigned short reserved4; + /*14*/ unsigned short specific; + unsigned short reserved5; + /*18*/ unsigned short leds; + unsigned short reserved6; + /*1C*/ unsigned short swreset; + unsigned short reserved7; + +} BCSR; + + +/* + * Register/mask bit definitions for the BCSRs + */ +#define BCSR_WHOAMI_DCID 0x000F +#define BCSR_WHOAMI_CPLD 0x00F0 +#define BCSR_WHOAMI_BOARD 0x0F00 + +#define BCSR_STATUS_PC0VS 0x0003 +#define BCSR_STATUS_PC1VS 0x000C +#define BCSR_STATUS_PC0FI 0x0010 +#define BCSR_STATUS_PC1FI 0x0020 +#define BCSR_STATUS_FLASHBUSY 0x0100 +#define BCSR_STATUS_ROMBUSY 0x0400 +#define BCSR_STATUS_SWAPBOOT 0x2000 +#define BCSR_STATUS_FLASHDEN 0xC000 + +#define BCSR_SWITCHES_DIP 0x00FF +#define BCSR_SWITCHES_DIP_1 0x0080 +#define BCSR_SWITCHES_DIP_2 0x0040 +#define BCSR_SWITCHES_DIP_3 0x0020 +#define BCSR_SWITCHES_DIP_4 0x0010 +#define BCSR_SWITCHES_DIP_5 0x0008 +#define BCSR_SWITCHES_DIP_6 0x0004 +#define BCSR_SWITCHES_DIP_7 0x0002 +#define BCSR_SWITCHES_DIP_8 0x0001 +#define BCSR_SWITCHES_ROTARY 0x0F00 + +#define BCSR_RESETS_PHY0 0x0001 +#define BCSR_RESETS_PHY1 0x0002 +#define BCSR_RESETS_DC 0x0004 +#define BCSR_RESETS_FIR_SEL 0x2000 +#define BCSR_RESETS_IRDA_MODE_MASK 0xC000 +#define BCSR_RESETS_IRDA_MODE_FULL 0x0000 +#define BCSR_RESETS_IRDA_MODE_OFF 0x4000 +#define BCSR_RESETS_IRDA_MODE_2_3 0x8000 +#define BCSR_RESETS_IRDA_MODE_1_3 0xC000 + +#define BCSR_PCMCIA_PC0VPP 0x0003 +#define BCSR_PCMCIA_PC0VCC 0x000C +#define BCSR_PCMCIA_PC0DRVEN 0x0010 +#define BCSR_PCMCIA_PC0RST 0x0080 +#define BCSR_PCMCIA_PC1VPP 0x0300 +#define BCSR_PCMCIA_PC1VCC 0x0C00 +#define BCSR_PCMCIA_PC1DRVEN 0x1000 +#define BCSR_PCMCIA_PC1RST 0x8000 + +#define BCSR_BOARD_PCIM66EN 0x0001 +#define BCSR_BOARD_SD0_PWR 0x0040 +#define BCSR_BOARD_SD1_PWR 0x0080 +#define BCSR_BOARD_PCIM33 0x0100 +#define BCSR_BOARD_GPIO200RST 0x0400 +#define BCSR_BOARD_PCICFG 0x1000 +#define BCSR_BOARD_SD0_WP 0x4000 +#define BCSR_BOARD_SD1_WP 0x8000 + +#define BCSR_LEDS_DECIMALS 0x0003 +#define BCSR_LEDS_LED0 0x0100 +#define BCSR_LEDS_LED1 0x0200 +#define BCSR_LEDS_LED2 0x0400 +#define BCSR_LEDS_LED3 0x0800 + +#define BCSR_SWRESET_RESET 0x0080 + +/* PCMCIA DBAu1x00 specific defines */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT)\ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) + +/* + * NAND defines + * + * Timing values as described in databook, * ns value stripped of the + * lower 2 bits. + * These defines are here rather than an Au1550 generic file because + * the parts chosen on another board may be different and may require + * different timings. + */ +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) + +/* Bitfield shift amounts */ +#define NAND_T_H_SHIFT 0 +#define NAND_T_PUL_SHIFT 4 +#define NAND_T_SU_SHIFT 8 +#define NAND_T_WH_SHIFT 12 + +#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) +#define NAND_CS 1 + +/* Should be done by YAMON */ +#define NAND_STCFG 0x00400005 /* 8-bit NAND */ +#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ +#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ + +#endif /* __ASM_DB1X00_H */ diff --git a/arch/mips/include/asm/mach-dec/mc146818rtc.h b/arch/mips/include/asm/mach-dec/mc146818rtc.h new file mode 100644 index 000000000000..6724e99e43e1 --- /dev/null +++ b/arch/mips/include/asm/mach-dec/mc146818rtc.h @@ -0,0 +1,43 @@ +/* + * RTC definitions for DECstation style attached Dallas DS1287 chip. + * + * Copyright (C) 1998, 2001 by Ralf Baechle + * Copyright (C) 1998 by Harald Koerfgen + * Copyright (C) 2002, 2005 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MIPS_DEC_RTC_DEC_H +#define __ASM_MIPS_DEC_RTC_DEC_H + +#include <linux/types.h> +#include <asm/addrspace.h> +#include <asm/dec/system.h> + +extern volatile u8 *dec_rtc_base; + +#define ARCH_RTC_LOCATION + +#define RTC_PORT(x) CPHYSADDR((long)dec_rtc_base) +#define RTC_IO_EXTENT dec_kn_slot_size +#define RTC_IOMAPPED 0 +#undef RTC_IRQ + +#define RTC_DEC_YEAR 0x3f /* Where we store the real year on DECs. */ + +static inline unsigned char CMOS_READ(unsigned long addr) +{ + return dec_rtc_base[addr * 4]; +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + dec_rtc_base[addr * 4] = data; +} + +#define RTC_ALWAYS_BCD 0 + +#endif /* __ASM_MIPS_DEC_RTC_DEC_H */ diff --git a/arch/mips/include/asm/mach-dec/war.h b/arch/mips/include/asm/mach-dec/war.h new file mode 100644 index 000000000000..ca5e2ef909ad --- /dev/null +++ b/arch/mips/include/asm/mach-dec/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_DEC_WAR_H +#define __ASM_MIPS_MACH_DEC_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_DEC_WAR_H */ diff --git a/arch/mips/include/asm/mach-emma2rh/irq.h b/arch/mips/include/asm/mach-emma2rh/irq.h new file mode 100644 index 000000000000..5439eb856461 --- /dev/null +++ b/arch/mips/include/asm/mach-emma2rh/irq.h @@ -0,0 +1,15 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 by Ralf Baechle + */ +#ifndef __ASM_MACH_EMMA2RH_IRQ_H +#define __ASM_MACH_EMMA2RH_IRQ_H + +#define NR_IRQS 256 + +#include_next <irq.h> + +#endif /* __ASM_MACH_EMMA2RH_IRQ_H */ diff --git a/arch/mips/include/asm/mach-emma2rh/war.h b/arch/mips/include/asm/mach-emma2rh/war.h new file mode 100644 index 000000000000..b660a4c30e6a --- /dev/null +++ b/arch/mips/include/asm/mach-emma2rh/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_EMMA2RH_WAR_H +#define __ASM_MIPS_MACH_EMMA2RH_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_EMMA2RH_WAR_H */ diff --git a/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h b/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h new file mode 100644 index 000000000000..107104c3cd12 --- /dev/null +++ b/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h @@ -0,0 +1,48 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004 Thomas Koeller <thomas.koeller@baslerweb.com> + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H + +/* + * Basler eXcite has an RM9122 processor. + */ +#define cpu_has_watch 1 +#define cpu_has_mips16 0 +#define cpu_has_divec 0 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_icache_snoops_remote_store 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_inclusive_pcaches 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 +#define cpu_scache_line_size() 32 + +#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-excite/excite.h b/arch/mips/include/asm/mach-excite/excite.h new file mode 100644 index 000000000000..4c29ba44992c --- /dev/null +++ b/arch/mips/include/asm/mach-excite/excite.h @@ -0,0 +1,154 @@ +#ifndef __EXCITE_H__ +#define __EXCITE_H__ + +#include <linux/init.h> +#include <asm/addrspace.h> +#include <asm/types.h> + +#define EXCITE_CPU_EXT_CLOCK 100000000 + +#if !defined(__ASSEMBLY__) +void __init excite_kgdb_init(void); +void excite_procfs_init(void); +extern unsigned long memsize; +extern char modetty[]; +extern u32 unit_id; +#endif + +/* Base name for XICAP devices */ +#define XICAP_NAME "xicap_gpi" + +/* OCD register offsets */ +#define LKB0 0x0038 +#define LKB5 0x0128 +#define LKM5 0x012C +#define LKB7 0x0138 +#define LKM7 0x013c +#define LKB8 0x0140 +#define LKM8 0x0144 +#define LKB9 0x0148 +#define LKM9 0x014c +#define LKB10 0x0150 +#define LKM10 0x0154 +#define LKB11 0x0158 +#define LKM11 0x015c +#define LKB12 0x0160 +#define LKM12 0x0164 +#define LKB13 0x0168 +#define LKM13 0x016c +#define LDP0 0x0200 +#define LDP1 0x0210 +#define LDP2 0x0220 +#define LDP3 0x0230 +#define INTPIN0 0x0A40 +#define INTPIN1 0x0A44 +#define INTPIN2 0x0A48 +#define INTPIN3 0x0A4C +#define INTPIN4 0x0A50 +#define INTPIN5 0x0A54 +#define INTPIN6 0x0A58 +#define INTPIN7 0x0A5C + + + + +/* TITAN register offsets */ +#define CPRR 0x0004 +#define CPDSR 0x0008 +#define CPTC0R 0x000c +#define CPTC1R 0x0010 +#define CPCFG0 0x0020 +#define CPCFG1 0x0024 +#define CPDST0A 0x0028 +#define CPDST0B 0x002c +#define CPDST1A 0x0030 +#define CPDST1B 0x0034 +#define CPXDSTA 0x0038 +#define CPXDSTB 0x003c +#define CPXCISRA 0x0048 +#define CPXCISRB 0x004c +#define CPGIG0ER 0x0050 +#define CPGIG1ER 0x0054 +#define CPGRWL 0x0068 +#define CPURSLMT 0x00f8 +#define UACFG 0x0200 +#define UAINTS 0x0204 +#define SDRXFCIE 0x4828 +#define SDTXFCIE 0x4928 +#define INTP0Status0 0x1B00 +#define INTP0Mask0 0x1B04 +#define INTP0Set0 0x1B08 +#define INTP0Clear0 0x1B0C +#define GXCFG 0x5000 +#define GXDMADRPFX 0x5018 +#define GXDMA_DESCADR 0x501c +#define GXCH0TDESSTRT 0x5054 + +/* IRQ definitions */ +#define NMICONFIG 0xac0 +#define TITAN_MSGINT 0xc4 +#define TITAN_IRQ ((TITAN_MSGINT / 0x20) + 2) +#define FPGA0_MSGINT 0x5a +#define FPGA0_IRQ ((FPGA0_MSGINT / 0x20) + 2) +#define FPGA1_MSGINT 0x7b +#define FPGA1_IRQ ((FPGA1_MSGINT / 0x20) + 2) +#define PHY_MSGINT 0x9c +#define PHY_IRQ ((PHY_MSGINT / 0x20) + 2) + +#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE) +/* Pre-release units used interrupt pin #9 */ +#define USB_IRQ 11 +#else +/* Re-designed units use interrupt pin #1 */ +#define USB_MSGINT 0x39 +#define USB_IRQ ((USB_MSGINT / 0x20) + 2) +#endif +#define TIMER_IRQ 12 + + +/* Device address ranges */ +#define EXCITE_OFFS_OCD 0x1fffc000 +#define EXCITE_SIZE_OCD (16 * 1024) +#define EXCITE_PHYS_OCD CPHYSADDR(EXCITE_OFFS_OCD) +#define EXCITE_ADDR_OCD CKSEG1ADDR(EXCITE_OFFS_OCD) + +#define EXCITE_OFFS_SCRAM 0x1fffa000 +#define EXCITE_SIZE_SCRAM (8 << 10) +#define EXCITE_PHYS_SCRAM CPHYSADDR(EXCITE_OFFS_SCRAM) +#define EXCITE_ADDR_SCRAM CKSEG1ADDR(EXCITE_OFFS_SCRAM) + +#define EXCITE_OFFS_PCI_IO 0x1fff8000 +#define EXCITE_SIZE_PCI_IO (8 << 10) +#define EXCITE_PHYS_PCI_IO CPHYSADDR(EXCITE_OFFS_PCI_IO) +#define EXCITE_ADDR_PCI_IO CKSEG1ADDR(EXCITE_OFFS_PCI_IO) + +#define EXCITE_OFFS_TITAN 0x1fff0000 +#define EXCITE_SIZE_TITAN (32 << 10) +#define EXCITE_PHYS_TITAN CPHYSADDR(EXCITE_OFFS_TITAN) +#define EXCITE_ADDR_TITAN CKSEG1ADDR(EXCITE_OFFS_TITAN) + +#define EXCITE_OFFS_PCI_MEM 0x1ffe0000 +#define EXCITE_SIZE_PCI_MEM (64 << 10) +#define EXCITE_PHYS_PCI_MEM CPHYSADDR(EXCITE_OFFS_PCI_MEM) +#define EXCITE_ADDR_PCI_MEM CKSEG1ADDR(EXCITE_OFFS_PCI_MEM) + +#define EXCITE_OFFS_FPGA 0x1ffdc000 +#define EXCITE_SIZE_FPGA (16 << 10) +#define EXCITE_PHYS_FPGA CPHYSADDR(EXCITE_OFFS_FPGA) +#define EXCITE_ADDR_FPGA CKSEG1ADDR(EXCITE_OFFS_FPGA) + +#define EXCITE_OFFS_NAND 0x1ffd8000 +#define EXCITE_SIZE_NAND (16 << 10) +#define EXCITE_PHYS_NAND CPHYSADDR(EXCITE_OFFS_NAND) +#define EXCITE_ADDR_NAND CKSEG1ADDR(EXCITE_OFFS_NAND) + +#define EXCITE_OFFS_BOOTROM 0x1f000000 +#define EXCITE_SIZE_BOOTROM (8 << 20) +#define EXCITE_PHYS_BOOTROM CPHYSADDR(EXCITE_OFFS_BOOTROM) +#define EXCITE_ADDR_BOOTROM CKSEG1ADDR(EXCITE_OFFS_BOOTROM) + +/* FPGA address offsets */ +#define EXCITE_FPGA_DPR 0x0104 /* dual-ported ram */ +#define EXCITE_FPGA_SYSCTL 0x0200 /* system control register block */ + +#endif /* __EXCITE_H__ */ diff --git a/arch/mips/include/asm/mach-excite/excite_fpga.h b/arch/mips/include/asm/mach-excite/excite_fpga.h new file mode 100644 index 000000000000..0a1ef69bece7 --- /dev/null +++ b/arch/mips/include/asm/mach-excite/excite_fpga.h @@ -0,0 +1,80 @@ +#ifndef EXCITE_FPGA_H_INCLUDED +#define EXCITE_FPGA_H_INCLUDED + + +/** + * Address alignment of the individual FPGA bytes. + * The address arrangement of the individual bytes of the FPGA is two + * byte aligned at the embedded MK2 platform. + */ +#ifdef EXCITE_CCI_FPGA_MK2 +typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2))); +#else +typedef unsigned char excite_cci_fpga_align_t; +#endif + + +/** + * Size of Dual Ported RAM. + */ +#define EXCITE_DPR_SIZE 263 + + +/** + * Size of Reserved Status Fields in Dual Ported RAM. + */ +#define EXCITE_DPR_STATUS_SIZE 7 + + + +/** + * FPGA. + * Hardware register layout of the FPGA interface. The FPGA must accessed + * byte wise solely. + * @see EXCITE_CCI_DPR_MK2 + */ +typedef struct excite_fpga { + + /** + * Dual Ported RAM. + */ + excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE]; + + /** + * Status. + */ + excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE]; + +#ifdef EXCITE_CCI_FPGA_MK2 + /** + * RM9000 Interrupt. + * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite. + */ + excite_cci_fpga_align_t rm9k_int; +#else + /** + * MK2 Interrupt. + * Write access initiates interrupt at the ARM processor of the MK2. + */ + excite_cci_fpga_align_t mk2_int; + + excite_cci_fpga_align_t gap[0x1000-0x10f]; + + /** + * IRQ Source/Acknowledge. + */ + excite_cci_fpga_align_t rm9k_irq_src; + + /** + * IRQ Mask. + * Set bits enable the related interrupt. + */ + excite_cci_fpga_align_t rm9k_irq_mask; +#endif + + +} excite_fpga; + + + +#endif /* ndef EXCITE_FPGA_H_INCLUDED */ diff --git a/arch/mips/include/asm/mach-excite/excite_nandflash.h b/arch/mips/include/asm/mach-excite/excite_nandflash.h new file mode 100644 index 000000000000..c4cf6140622e --- /dev/null +++ b/arch/mips/include/asm/mach-excite/excite_nandflash.h @@ -0,0 +1,7 @@ +#ifndef __EXCITE_NANDFLASH_H__ +#define __EXCITE_NANDFLASH_H__ + +/* Resource names */ +#define EXCITE_NANDFLASH_RESOURCE_REGS "excite_nandflash_regs" + +#endif /* __EXCITE_NANDFLASH_H__ */ diff --git a/arch/mips/include/asm/mach-excite/rm9k_eth.h b/arch/mips/include/asm/mach-excite/rm9k_eth.h new file mode 100644 index 000000000000..94705a46f72e --- /dev/null +++ b/arch/mips/include/asm/mach-excite/rm9k_eth.h @@ -0,0 +1,23 @@ +#if !defined(__RM9K_ETH_H__) +#define __RM9K_ETH_H__ + +#define RM9K_GE_NAME "rm9k_ge" + +/* Resource names */ +#define RM9K_GE_RESOURCE_MAC "rm9k_ge_mac" +#define RM9K_GE_RESOURCE_MSTAT "rm9k_ge_mstat" +#define RM9K_GE_RESOURCE_PKTPROC "rm9k_ge_pktproc" +#define RM9K_GE_RESOURCE_XDMA "rm9k_ge_xdma" +#define RM9K_GE_RESOURCE_FIFO_RX "rm9k_ge_fifo_rx" +#define RM9K_GE_RESOURCE_FIFO_TX "rm9k_ge_fifo_tx" +#define RM9K_GE_RESOURCE_FIFOMEM_RX "rm9k_ge_fifo_memory_rx" +#define RM9K_GE_RESOURCE_FIFOMEM_TX "rm9k_ge_fifo_memory_tx" +#define RM9K_GE_RESOURCE_PHY "rm9k_ge_phy" +#define RM9K_GE_RESOURCE_DMADESC_RX "rm9k_ge_dmadesc_rx" +#define RM9K_GE_RESOURCE_DMADESC_TX "rm9k_ge_dmadesc_tx" +#define RM9K_GE_RESOURCE_IRQ_MAIN "rm9k_ge_irq_main" +#define RM9K_GE_RESOURCE_IRQ_PHY "rm9k_ge_irq_phy" +#define RM9K_GE_RESOURCE_GPI_SLICE "rm9k_ge_gpi_slice" +#define RM9K_GE_RESOURCE_MDIO_CHANNEL "rm9k_ge_mdio_channel" + +#endif /* !defined(__RM9K_ETH_H__) */ diff --git a/arch/mips/include/asm/mach-excite/rm9k_wdt.h b/arch/mips/include/asm/mach-excite/rm9k_wdt.h new file mode 100644 index 000000000000..3fa3c08d2da7 --- /dev/null +++ b/arch/mips/include/asm/mach-excite/rm9k_wdt.h @@ -0,0 +1,12 @@ +#ifndef __RM9K_WDT_H__ +#define __RM9K_WDT_H__ + +/* Device name */ +#define WDT_NAME "wdt_gpi" + +/* Resource names */ +#define WDT_RESOURCE_REGS "excite_watchdog_regs" +#define WDT_RESOURCE_IRQ "excite_watchdog_irq" +#define WDT_RESOURCE_COUNTER "excite_watchdog_counter" + +#endif /* __RM9K_WDT_H__ */ diff --git a/arch/mips/include/asm/mach-excite/rm9k_xicap.h b/arch/mips/include/asm/mach-excite/rm9k_xicap.h new file mode 100644 index 000000000000..009577734a8d --- /dev/null +++ b/arch/mips/include/asm/mach-excite/rm9k_xicap.h @@ -0,0 +1,16 @@ +#ifndef __EXCITE_XICAP_H__ +#define __EXCITE_XICAP_H__ + + +/* Resource names */ +#define XICAP_RESOURCE_FIFO_RX "xicap_fifo_rx" +#define XICAP_RESOURCE_FIFO_TX "xicap_fifo_tx" +#define XICAP_RESOURCE_XDMA "xicap_xdma" +#define XICAP_RESOURCE_DMADESC "xicap_dmadesc" +#define XICAP_RESOURCE_PKTPROC "xicap_pktproc" +#define XICAP_RESOURCE_IRQ "xicap_irq" +#define XICAP_RESOURCE_GPI_SLICE "xicap_gpi_slice" +#define XICAP_RESOURCE_FIFO_BLK "xicap_fifo_blocks" +#define XICAP_RESOURCE_PKT_STREAM "xicap_pkt_stream" + +#endif /* __EXCITE_XICAP_H__ */ diff --git a/arch/mips/include/asm/mach-excite/war.h b/arch/mips/include/asm/mach-excite/war.h new file mode 100644 index 000000000000..1f82180c1598 --- /dev/null +++ b/arch/mips/include/asm/mach-excite/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_EXCITE_WAR_H +#define __ASM_MIPS_MACH_EXCITE_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 1 +#define ICACHE_REFILLS_WORKAROUND_WAR 1 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_EXCITE_WAR_H */ diff --git a/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h new file mode 100644 index 000000000000..7c185bb06f13 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h @@ -0,0 +1,13 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Ralf Baechle + */ +#ifndef __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H + +/* Intentionally empty file ... */ + +#endif /* __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h new file mode 100644 index 000000000000..76e04e7feb84 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/dma-coherence.h @@ -0,0 +1,45 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org> + * + */ +#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H +#define __ASM_MACH_GENERIC_DMA_COHERENCE_H + +struct device; + +static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, + size_t size) +{ + return virt_to_phys(addr); +} + +static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, + struct page *page) +{ + return page_to_phys(page); +} + +static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return dma_addr; +} + +static inline void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ +#ifdef CONFIG_DMA_COHERENT + return 1; +#endif +#ifdef CONFIG_DMA_NONCOHERENT + return 0; +#endif +} + +#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */ diff --git a/arch/mips/include/asm/mach-generic/floppy.h b/arch/mips/include/asm/mach-generic/floppy.h new file mode 100644 index 000000000000..001a8ce17c17 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/floppy.h @@ -0,0 +1,139 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1997, 1998, 2003 by Ralf Baechle + */ +#ifndef __ASM_MACH_GENERIC_FLOPPY_H +#define __ASM_MACH_GENERIC_FLOPPY_H + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/linkage.h> +#include <linux/types.h> +#include <linux/mm.h> + +#include <asm/bootinfo.h> +#include <asm/cachectl.h> +#include <asm/dma.h> +#include <asm/floppy.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/pgtable.h> + +/* + * How to access the FDC's registers. + */ +static inline unsigned char fd_inb(unsigned int port) +{ + return inb_p(port); +} + +static inline void fd_outb(unsigned char value, unsigned int port) +{ + outb_p(value, port); +} + +/* + * How to access the floppy DMA functions. + */ +static inline void fd_enable_dma(void) +{ + enable_dma(FLOPPY_DMA); +} + +static inline void fd_disable_dma(void) +{ + disable_dma(FLOPPY_DMA); +} + +static inline int fd_request_dma(void) +{ + return request_dma(FLOPPY_DMA, "floppy"); +} + +static inline void fd_free_dma(void) +{ + free_dma(FLOPPY_DMA); +} + +static inline void fd_clear_dma_ff(void) +{ + clear_dma_ff(FLOPPY_DMA); +} + +static inline void fd_set_dma_mode(char mode) +{ + set_dma_mode(FLOPPY_DMA, mode); +} + +static inline void fd_set_dma_addr(char *addr) +{ + set_dma_addr(FLOPPY_DMA, (unsigned long) addr); +} + +static inline void fd_set_dma_count(unsigned int count) +{ + set_dma_count(FLOPPY_DMA, count); +} + +static inline int fd_get_dma_residue(void) +{ + return get_dma_residue(FLOPPY_DMA); +} + +static inline void fd_enable_irq(void) +{ + enable_irq(FLOPPY_IRQ); +} + +static inline void fd_disable_irq(void) +{ + disable_irq(FLOPPY_IRQ); +} + +static inline int fd_request_irq(void) +{ + return request_irq(FLOPPY_IRQ, floppy_interrupt, + IRQF_DISABLED, "floppy", NULL); +} + +static inline void fd_free_irq(void) +{ + free_irq(FLOPPY_IRQ, NULL); +} + +#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL); + + +static inline unsigned long fd_getfdaddr1(void) +{ + return 0x3f0; +} + +static inline unsigned long fd_dma_mem_alloc(unsigned long size) +{ + unsigned long mem; + + mem = __get_dma_pages(GFP_KERNEL, get_order(size)); + + return mem; +} + +static inline void fd_dma_mem_free(unsigned long addr, unsigned long size) +{ + free_pages(addr, get_order(size)); +} + +static inline unsigned long fd_drive_type(unsigned long n) +{ + if (n == 0) + return 4; /* 3,5", 1.44mb */ + + return 0; +} + +#endif /* __ASM_MACH_GENERIC_FLOPPY_H */ diff --git a/arch/mips/include/asm/mach-generic/gpio.h b/arch/mips/include/asm/mach-generic/gpio.h new file mode 100644 index 000000000000..b4e70208da64 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/gpio.h @@ -0,0 +1,21 @@ +#ifndef __ASM_MACH_GENERIC_GPIO_H +#define __ASM_MACH_GENERIC_GPIO_H + +#ifdef CONFIG_GPIOLIB +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#else +int gpio_request(unsigned gpio, const char *label); +void gpio_free(unsigned gpio); +int gpio_direction_input(unsigned gpio); +int gpio_direction_output(unsigned gpio, int value); +int gpio_get_value(unsigned gpio); +void gpio_set_value(unsigned gpio, int value); +#endif +int gpio_to_irq(unsigned gpio); +int irq_to_gpio(unsigned irq); + +#include <asm-generic/gpio.h> /* cansleep wrappers */ + +#endif /* __ASM_MACH_GENERIC_GPIO_H */ diff --git a/arch/mips/include/asm/mach-generic/ide.h b/arch/mips/include/asm/mach-generic/ide.h new file mode 100644 index 000000000000..73008f7bdc93 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/ide.h @@ -0,0 +1,167 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994-1996 Linus Torvalds & authors + * + * Copied from i386; many of the especially older MIPS or ISA-based platforms + * are basically identical. Using this file probably implies i8259 PIC + * support in a system but the very least interrupt numbers 0 - 15 need to + * be put aside for legacy devices. + */ +#ifndef __ASM_MACH_GENERIC_IDE_H +#define __ASM_MACH_GENERIC_IDE_H + +#ifdef __KERNEL__ + +#include <linux/pci.h> +#include <linux/stddef.h> +#include <asm/processor.h> + +static __inline__ int ide_probe_legacy(void) +{ +#ifdef CONFIG_PCI + struct pci_dev *dev; + /* + * This can be called on the ide_setup() path, super-early in + * boot. But the down_read() will enable local interrupts, + * which can cause some machines to crash. So here we detect + * and flag that situation and bail out early. + */ + if (no_pci_devices()) + return 0; + dev = pci_get_class(PCI_CLASS_BRIDGE_EISA << 8, NULL); + if (dev) + goto found; + dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL); + if (dev) + goto found; + return 0; +found: + pci_dev_put(dev); + return 1; +#elif defined(CONFIG_EISA) || defined(CONFIG_ISA) + return 1; +#else + return 0; +#endif +} + +/* MIPS port and memory-mapped I/O string operations. */ +static inline void __ide_flush_prologue(void) +{ +#ifdef CONFIG_SMP + if (cpu_has_dc_aliases) + preempt_disable(); +#endif +} + +static inline void __ide_flush_epilogue(void) +{ +#ifdef CONFIG_SMP + if (cpu_has_dc_aliases) + preempt_enable(); +#endif +} + +static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size) +{ + if (cpu_has_dc_aliases) { + unsigned long end = addr + size; + + while (addr < end) { + local_flush_data_cache_page((void *)addr); + addr += PAGE_SIZE; + } + } +} + +/* + * insw() and gang might be called with interrupts disabled, so we can't + * send IPIs for flushing due to the potencial of deadlocks, see the comment + * above smp_call_function() in arch/mips/kernel/smp.c. We work around the + * problem by disabling preemption so we know we actually perform the flush + * on the processor that actually has the lines to be flushed which hopefully + * is even better for performance anyway. + */ +static inline void __ide_insw(unsigned long port, void *addr, + unsigned int count) +{ + __ide_flush_prologue(); + insw(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 2); + __ide_flush_epilogue(); +} + +static inline void __ide_insl(unsigned long port, void *addr, unsigned int count) +{ + __ide_flush_prologue(); + insl(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 4); + __ide_flush_epilogue(); +} + +static inline void __ide_outsw(unsigned long port, const void *addr, + unsigned long count) +{ + __ide_flush_prologue(); + outsw(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 2); + __ide_flush_epilogue(); +} + +static inline void __ide_outsl(unsigned long port, const void *addr, + unsigned long count) +{ + __ide_flush_prologue(); + outsl(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 4); + __ide_flush_epilogue(); +} + +static inline void __ide_mm_insw(void __iomem *port, void *addr, u32 count) +{ + __ide_flush_prologue(); + readsw(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 2); + __ide_flush_epilogue(); +} + +static inline void __ide_mm_insl(void __iomem *port, void *addr, u32 count) +{ + __ide_flush_prologue(); + readsl(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 4); + __ide_flush_epilogue(); +} + +static inline void __ide_mm_outsw(void __iomem *port, void *addr, u32 count) +{ + __ide_flush_prologue(); + writesw(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 2); + __ide_flush_epilogue(); +} + +static inline void __ide_mm_outsl(void __iomem * port, void *addr, u32 count) +{ + __ide_flush_prologue(); + writesl(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 4); + __ide_flush_epilogue(); +} + +/* ide_insw calls insw, not __ide_insw. Why? */ +#undef insw +#undef insl +#undef outsw +#undef outsl +#define insw(port, addr, count) __ide_insw(port, addr, count) +#define insl(port, addr, count) __ide_insl(port, addr, count) +#define outsw(port, addr, count) __ide_outsw(port, addr, count) +#define outsl(port, addr, count) __ide_outsl(port, addr, count) + +#endif /* __KERNEL__ */ + +#endif /* __ASM_MACH_GENERIC_IDE_H */ diff --git a/arch/mips/include/asm/mach-generic/ioremap.h b/arch/mips/include/asm/mach-generic/ioremap.h new file mode 100644 index 000000000000..b379938d47f0 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/ioremap.h @@ -0,0 +1,34 @@ +/* + * include/asm-mips/mach-generic/ioremap.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MACH_GENERIC_IOREMAP_H +#define __ASM_MACH_GENERIC_IOREMAP_H + +#include <linux/types.h> + +/* + * Allow physical addresses to be fixed up to help peripherals located + * outside the low 32-bit range -- generic pass-through version. + */ +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return 0; +} + +#endif /* __ASM_MACH_GENERIC_IOREMAP_H */ diff --git a/arch/mips/include/asm/mach-generic/irq.h b/arch/mips/include/asm/mach-generic/irq.h new file mode 100644 index 000000000000..70d9a25132c5 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/irq.h @@ -0,0 +1,45 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 by Ralf Baechle + */ +#ifndef __ASM_MACH_GENERIC_IRQ_H +#define __ASM_MACH_GENERIC_IRQ_H + +#ifndef NR_IRQS +#define NR_IRQS 128 +#endif + +#ifdef CONFIG_I8259 +#ifndef I8259A_IRQ_BASE +#define I8259A_IRQ_BASE 0 +#endif +#endif + +#ifdef CONFIG_IRQ_CPU + +#ifndef MIPS_CPU_IRQ_BASE +#ifdef CONFIG_I8259 +#define MIPS_CPU_IRQ_BASE 16 +#else +#define MIPS_CPU_IRQ_BASE 0 +#endif /* CONFIG_I8259 */ +#endif + +#ifdef CONFIG_IRQ_CPU_RM7K +#ifndef RM7K_CPU_IRQ_BASE +#define RM7K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+8) +#endif +#endif + +#ifdef CONFIG_IRQ_CPU_RM9K +#ifndef RM9K_CPU_IRQ_BASE +#define RM9K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+12) +#endif +#endif + +#endif /* CONFIG_IRQ_CPU */ + +#endif /* __ASM_MACH_GENERIC_IRQ_H */ diff --git a/arch/mips/include/asm/mach-generic/kernel-entry-init.h b/arch/mips/include/asm/mach-generic/kernel-entry-init.h new file mode 100644 index 000000000000..7e66505fa574 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/kernel-entry-init.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Embedded Alley Solutions, Inc + * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_MACH_GENERIC_KERNEL_ENTRY_H +#define __ASM_MACH_GENERIC_KERNEL_ENTRY_H + +/* Intentionally empty macro, used in head.S. Override in + * arch/mips/mach-xxx/kernel-entry-init.h when necessary. + */ +.macro kernel_entry_setup +.endm + +/* + * Do SMP slave processor setup necessary before we can savely execute C code. + */ + .macro smp_slave_setup + .endm + + +#endif /* __ASM_MACH_GENERIC_KERNEL_ENTRY_H */ diff --git a/arch/mips/include/asm/mach-generic/kmalloc.h b/arch/mips/include/asm/mach-generic/kmalloc.h new file mode 100644 index 000000000000..b8e6deba352f --- /dev/null +++ b/arch/mips/include/asm/mach-generic/kmalloc.h @@ -0,0 +1,13 @@ +#ifndef __ASM_MACH_GENERIC_KMALLOC_H +#define __ASM_MACH_GENERIC_KMALLOC_H + + +#ifndef CONFIG_DMA_COHERENT +/* + * Total overkill for most systems but need as a safe default. + * Set this one if any device in the system might do non-coherent DMA. + */ +#define ARCH_KMALLOC_MINALIGN 128 +#endif + +#endif /* __ASM_MACH_GENERIC_KMALLOC_H */ diff --git a/arch/mips/include/asm/mach-generic/mangle-port.h b/arch/mips/include/asm/mach-generic/mangle-port.h new file mode 100644 index 000000000000..f49dc990214b --- /dev/null +++ b/arch/mips/include/asm/mach-generic/mangle-port.h @@ -0,0 +1,52 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Ralf Baechle + */ +#ifndef __ASM_MACH_GENERIC_MANGLE_PORT_H +#define __ASM_MACH_GENERIC_MANGLE_PORT_H + +#define __swizzle_addr_b(port) (port) +#define __swizzle_addr_w(port) (port) +#define __swizzle_addr_l(port) (port) +#define __swizzle_addr_q(port) (port) + +/* + * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware; + * less sane hardware forces software to fiddle with this... + * + * Regardless, if the host bus endianness mismatches that of PCI/ISA, then + * you can't have the numerical value of data and byte addresses within + * multibyte quantities both preserved at the same time. Hence two + * variations of functions: non-prefixed ones that preserve the value + * and prefixed ones that preserve byte addresses. The latters are + * typically used for moving raw data between a peripheral and memory (cf. + * string I/O functions), hence the "__mem_" prefix. + */ +#if defined(CONFIG_SWAP_IO_SPACE) + +# define ioswabb(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define ioswabw(a, x) le16_to_cpu(x) +# define __mem_ioswabw(a, x) (x) +# define ioswabl(a, x) le32_to_cpu(x) +# define __mem_ioswabl(a, x) (x) +# define ioswabq(a, x) le64_to_cpu(x) +# define __mem_ioswabq(a, x) (x) + +#else + +# define ioswabb(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define __mem_ioswabw(a, x) cpu_to_le16(x) +# define ioswabl(a, x) (x) +# define __mem_ioswabl(a, x) cpu_to_le32(x) +# define ioswabq(a, x) (x) +# define __mem_ioswabq(a, x) cpu_to_le32(x) + +#endif + +#endif /* __ASM_MACH_GENERIC_MANGLE_PORT_H */ diff --git a/arch/mips/include/asm/mach-generic/mc146818rtc.h b/arch/mips/include/asm/mach-generic/mc146818rtc.h new file mode 100644 index 000000000000..0b9a942f079d --- /dev/null +++ b/arch/mips/include/asm/mach-generic/mc146818rtc.h @@ -0,0 +1,36 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03 by Ralf Baechle + * + * RTC routines for PC style attached Dallas chip. + */ +#ifndef __ASM_MACH_GENERIC_MC146818RTC_H +#define __ASM_MACH_GENERIC_MC146818RTC_H + +#include <asm/io.h> + +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_IRQ 8 + +static inline unsigned char CMOS_READ(unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + return inb_p(RTC_PORT(1)); +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + outb_p(data, RTC_PORT(1)); +} + +#define RTC_ALWAYS_BCD 1 + +#ifndef mc146818_decode_year +#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900) +#endif + +#endif /* __ASM_MACH_GENERIC_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h new file mode 100644 index 000000000000..c9fa4b14968d --- /dev/null +++ b/arch/mips/include/asm/mach-generic/spaces.h @@ -0,0 +1,85 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_MACH_GENERIC_SPACES_H +#define _ASM_MACH_GENERIC_SPACES_H + +#include <linux/const.h> + +/* + * This gives the physical RAM offset. + */ +#ifndef PHYS_OFFSET +#define PHYS_OFFSET _AC(0, UL) +#endif + +#ifdef CONFIG_32BIT + +#define CAC_BASE _AC(0x80000000, UL) +#define IO_BASE _AC(0xa0000000, UL) +#define UNCAC_BASE _AC(0xa0000000, UL) + +#ifndef MAP_BASE +#define MAP_BASE _AC(0xc0000000, UL) +#endif + +/* + * Memory above this physical address will be considered highmem. + */ +#ifndef HIGHMEM_START +#define HIGHMEM_START _AC(0x20000000, UL) +#endif + +#endif /* CONFIG_32BIT */ + +#ifdef CONFIG_64BIT + +#ifndef CAC_BASE +#ifdef CONFIG_DMA_NONCOHERENT +#define CAC_BASE _AC(0x9800000000000000, UL) +#else +#define CAC_BASE _AC(0xa800000000000000, UL) +#endif +#endif + +#ifndef IO_BASE +#define IO_BASE _AC(0x9000000000000000, UL) +#endif + +#ifndef UNCAC_BASE +#define UNCAC_BASE _AC(0x9000000000000000, UL) +#endif + +#ifndef MAP_BASE +#define MAP_BASE _AC(0xc000000000000000, UL) +#endif + +/* + * Memory above this physical address will be considered highmem. + * Fixme: 59 bits is a fictive number and makes assumptions about processors + * in the distant future. Nobody will care for a few years :-) + */ +#ifndef HIGHMEM_START +#define HIGHMEM_START (_AC(1, UL) << _AC(59, UL)) +#endif + +#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK)) +#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK)) +#define TO_UNCAC(x) (UNCAC_BASE | ((x) & TO_PHYS_MASK)) + +#endif /* CONFIG_64BIT */ + +/* + * This handles the memory map. + */ +#ifndef PAGE_OFFSET +#define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET) +#endif + +#endif /* __ASM_MACH_GENERIC_SPACES_H */ diff --git a/arch/mips/include/asm/mach-generic/topology.h b/arch/mips/include/asm/mach-generic/topology.h new file mode 100644 index 000000000000..5428f333a02c --- /dev/null +++ b/arch/mips/include/asm/mach-generic/topology.h @@ -0,0 +1 @@ +#include <asm-generic/topology.h> diff --git a/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h new file mode 100644 index 000000000000..9c8735158da1 --- /dev/null +++ b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h @@ -0,0 +1,44 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 07 Ralf Baechle + */ +#ifndef __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H + +/* + * IP22 with a variety of processors so we can't use defaults for everything. + */ +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +#define cpu_has_fpu 1 +#define cpu_has_32fpr 1 +#define cpu_has_counter 1 +#define cpu_has_mips16 0 +#define cpu_has_divec 0 +#define cpu_has_cache_cdex_p 1 +#define cpu_has_prefetch 0 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 /* Needs to change for R8000 */ +#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000) +#define cpu_has_ic_fills_f_dc 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-ip22/ds1286.h b/arch/mips/include/asm/mach-ip22/ds1286.h new file mode 100644 index 000000000000..f19f1eafbc71 --- /dev/null +++ b/arch/mips/include/asm/mach-ip22/ds1286.h @@ -0,0 +1,18 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03 by Ralf Baechle + * + * RTC routines for PC style attached Dallas chip. + */ +#ifndef __ASM_MACH_IP22_DS1286_H +#define __ASM_MACH_IP22_DS1286_H + +#include <asm/sgi/hpc3.h> + +#define rtc_read(reg) (hpc3c0->rtcregs[(reg)] & 0xff) +#define rtc_write(data, reg) do { hpc3c0->rtcregs[(reg)] = (data); } while(0) + +#endif /* __ASM_MACH_IP22_DS1286_H */ diff --git a/arch/mips/include/asm/mach-ip22/spaces.h b/arch/mips/include/asm/mach-ip22/spaces.h new file mode 100644 index 000000000000..7f9fa6f66059 --- /dev/null +++ b/arch/mips/include/asm/mach-ip22/spaces.h @@ -0,0 +1,27 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_MACH_IP22_SPACES_H +#define _ASM_MACH_IP22_SPACES_H + + +#ifdef CONFIG_64BIT + +#define PAGE_OFFSET 0xffffffff80000000UL + +#define CAC_BASE 0xffffffff80000000 +#define IO_BASE 0xffffffffa0000000 +#define UNCAC_BASE 0xffffffffa0000000 +#define MAP_BASE 0xc000000000000000 + +#endif /* CONFIG_64BIT */ + +#include <asm/mach-generic/spaces.h> + +#endif /* __ASM_MACH_IP22_SPACES_H */ diff --git a/arch/mips/include/asm/mach-ip22/war.h b/arch/mips/include/asm/mach-ip22/war.h new file mode 100644 index 000000000000..a44fa9656a82 --- /dev/null +++ b/arch/mips/include/asm/mach-ip22/war.h @@ -0,0 +1,29 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_IP22_WAR_H +#define __ASM_MIPS_MACH_IP22_WAR_H + +/* + * R4600 CPU modules for the Indy come with both V1.7 and V2.0 processors. + */ + +#define R4600_V1_INDEX_ICACHEOP_WAR 1 +#define R4600_V1_HIT_CACHEOP_WAR 1 +#define R4600_V2_HIT_CACHEOP_WAR 1 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_IP22_WAR_H */ diff --git a/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h new file mode 100644 index 000000000000..7d3112b148d9 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h @@ -0,0 +1,54 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 07 Ralf Baechle + */ +#ifndef __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H + +/* + * IP27 only comes with R10000 family processors all using the same config + */ +#define cpu_has_watch 1 +#define cpu_has_mips16 0 +#define cpu_has_divec 0 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_icache_snoops_remote_store 1 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_6k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_8k_cache 0 +#define cpu_has_tx39_cache 0 + +#define cpu_has_inclusive_pcaches 1 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 64 +#define cpu_scache_line_size() 128 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-ip27/dma-coherence.h b/arch/mips/include/asm/mach-ip27/dma-coherence.h new file mode 100644 index 000000000000..ed7e6222dc15 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/dma-coherence.h @@ -0,0 +1,50 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org> + * + */ +#ifndef __ASM_MACH_IP27_DMA_COHERENCE_H +#define __ASM_MACH_IP27_DMA_COHERENCE_H + +#include <asm/pci/bridge.h> + +#define pdev_to_baddr(pdev, addr) \ + (BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr)) +#define dev_to_baddr(dev, addr) \ + pdev_to_baddr(to_pci_dev(dev), (addr)) + +struct device; + +static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, + size_t size) +{ + dma_addr_t pa = dev_to_baddr(dev, virt_to_phys(addr)); + + return pa; +} + +static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + dma_addr_t pa = dev_to_baddr(dev, page_to_phys(page)); + + return pa; +} + +static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return dma_addr & ~(0xffUL << 56); +} + +static inline void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 1; /* IP27 non-cohernet mode is unsupported */ +} + +#endif /* __ASM_MACH_IP27_DMA_COHERENCE_H */ diff --git a/arch/mips/include/asm/mach-ip27/irq.h b/arch/mips/include/asm/mach-ip27/irq.h new file mode 100644 index 000000000000..cf4384bfa846 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/irq.h @@ -0,0 +1,22 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999, 2000, 01, 02, 03 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2001 Kanoj Sarcar + */ +#ifndef __ASM_MACH_IP27_IRQ_H +#define __ASM_MACH_IP27_IRQ_H + +/* + * A hardwired interrupt number is completly stupid for this system - a + * large configuration might have thousands if not tenthousands of + * interrupts. + */ +#define NR_IRQS 256 + +#include_next <irq.h> + +#endif /* __ASM_MACH_IP27_IRQ_H */ diff --git a/arch/mips/include/asm/mach-ip27/kernel-entry-init.h b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h new file mode 100644 index 000000000000..624d66c7f290 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h @@ -0,0 +1,59 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Silicon Graphics, Inc. + * Copyright (C) 2005 Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MACH_IP27_KERNEL_ENTRY_H +#define __ASM_MACH_IP27_KERNEL_ENTRY_H + +#include <asm/sn/addrs.h> +#include <asm/sn/sn0/hubni.h> +#include <asm/sn/klkernvars.h> + +/* + * Returns the local nasid into res. + */ + .macro GET_NASID_ASM res + dli \res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID) + ld \res, (\res) + and \res, NSRI_NODEID_MASK + dsrl \res, NSRI_NODEID_SHFT + .endm + +/* + * Intentionally empty macro, used in head.S. Override in + * arch/mips/mach-xxx/kernel-entry-init.h when necessary. + */ + .macro kernel_entry_setup + GET_NASID_ASM t1 + move t2, t1 # text and data are here + MAPPED_KERNEL_SETUP_TLB + .endm + +/* + * Do SMP slave processor setup necessary before we can savely execute C code. + */ + .macro smp_slave_setup + GET_NASID_ASM t1 + dli t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \ + KLDIR_OFF_POINTER + CAC_BASE + dsll t1, NASID_SHFT + or t0, t0, t1 + ld t0, 0(t0) # t0 points to kern_vars struct + lh t1, KV_RO_NASID_OFFSET(t0) + lh t2, KV_RW_NASID_OFFSET(t0) + MAPPED_KERNEL_SETUP_TLB + + /* + * We might not get launched at the address the kernel is linked to, + * so we jump there. + */ + PTR_LA t0, 0f + jr t0 +0: + .endm + +#endif /* __ASM_MACH_IP27_KERNEL_ENTRY_H */ diff --git a/arch/mips/include/asm/mach-ip27/kmalloc.h b/arch/mips/include/asm/mach-ip27/kmalloc.h new file mode 100644 index 000000000000..426bd049b2d7 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/kmalloc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_MACH_IP27_KMALLOC_H +#define __ASM_MACH_IP27_KMALLOC_H + +/* + * All happy, no need to define ARCH_KMALLOC_MINALIGN + */ + +#endif /* __ASM_MACH_IP27_KMALLOC_H */ diff --git a/arch/mips/include/asm/mach-ip27/mangle-port.h b/arch/mips/include/asm/mach-ip27/mangle-port.h new file mode 100644 index 000000000000..f6e4912ea062 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/mangle-port.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Ralf Baechle + */ +#ifndef __ASM_MACH_IP27_MANGLE_PORT_H +#define __ASM_MACH_IP27_MANGLE_PORT_H + +#define __swizzle_addr_b(port) (port) +#define __swizzle_addr_w(port) ((port) ^ 2) +#define __swizzle_addr_l(port) (port) +#define __swizzle_addr_q(port) (port) + +# define ioswabb(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define __mem_ioswabw(a, x) cpu_to_le16(x) +# define ioswabl(a, x) (x) +# define __mem_ioswabl(a, x) cpu_to_le32(x) +# define ioswabq(a, x) (x) +# define __mem_ioswabq(a, x) cpu_to_le32(x) + +#endif /* __ASM_MACH_IP27_MANGLE_PORT_H */ diff --git a/arch/mips/include/asm/mach-ip27/mmzone.h b/arch/mips/include/asm/mach-ip27/mmzone.h new file mode 100644 index 000000000000..986a3b9b59a7 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/mmzone.h @@ -0,0 +1,36 @@ +#ifndef _ASM_MACH_MMZONE_H +#define _ASM_MACH_MMZONE_H + +#include <asm/sn/addrs.h> +#include <asm/sn/arch.h> +#include <asm/sn/hub.h> + +#define pa_to_nid(addr) NASID_TO_COMPACT_NODEID(NASID_GET(addr)) + +#define LEVELS_PER_SLICE 128 + +struct slice_data { + unsigned long irq_enable_mask[2]; + int level_to_irq[LEVELS_PER_SLICE]; +}; + +struct hub_data { + kern_vars_t kern_vars; + DECLARE_BITMAP(h_bigwin_used, HUB_NUM_BIG_WINDOW); + cpumask_t h_cpus; + unsigned long slice_map; + unsigned long irq_alloc_mask[2]; + struct slice_data slice[2]; +}; + +struct node_data { + struct pglist_data pglist; + struct hub_data hub; +}; + +extern struct node_data *__node_data[]; + +#define NODE_DATA(n) (&__node_data[(n)]->pglist) +#define hub_data(n) (&__node_data[(n)]->hub) + +#endif /* _ASM_MACH_MMZONE_H */ diff --git a/arch/mips/include/asm/mach-ip27/spaces.h b/arch/mips/include/asm/mach-ip27/spaces.h new file mode 100644 index 000000000000..b18802a0b17e --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/spaces.h @@ -0,0 +1,30 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 99 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999 by Silicon Graphics, Inc. + */ +#ifndef _ASM_MACH_IP27_SPACES_H +#define _ASM_MACH_IP27_SPACES_H + +/* + * IP27 uses the R10000's uncached attribute feature. Attribute 3 selects + * uncached memory addressing. + */ + +#define HSPEC_BASE 0x9000000000000000 +#define IO_BASE 0x9200000000000000 +#define MSPEC_BASE 0x9400000000000000 +#define UNCAC_BASE 0x9600000000000000 + +#define TO_MSPEC(x) (MSPEC_BASE | ((x) & TO_PHYS_MASK)) +#define TO_HSPEC(x) (HSPEC_BASE | ((x) & TO_PHYS_MASK)) + +#define HIGHMEM_START (~0UL) + +#include <asm/mach-generic/spaces.h> + +#endif /* _ASM_MACH_IP27_SPACES_H */ diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h new file mode 100644 index 000000000000..7785bec732f2 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/topology.h @@ -0,0 +1,59 @@ +#ifndef _ASM_MACH_TOPOLOGY_H +#define _ASM_MACH_TOPOLOGY_H 1 + +#include <asm/sn/hub.h> +#include <asm/sn/types.h> +#include <asm/mmzone.h> + +struct cpuinfo_ip27 { +// cpuid_t p_cpuid; /* PROM assigned cpuid */ + cnodeid_t p_nodeid; /* my node ID in compact-id-space */ + nasid_t p_nasid; /* my node ID in numa-as-id-space */ + unsigned char p_slice; /* Physical position on node board */ +#if 0 + unsigned long loops_per_sec; + unsigned long ipi_count; + unsigned long irq_attempt[NR_IRQS]; + unsigned long smp_local_irq_count; + unsigned long prof_multiplier; + unsigned long prof_counter; +#endif +}; + +extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS]; + +#define cpu_to_node(cpu) (sn_cpu_info[(cpu)].p_nodeid) +#define parent_node(node) (node) +#define node_to_cpumask(node) (hub_data(node)->h_cpus) +#define node_to_first_cpu(node) (first_cpu(node_to_cpumask(node))) +struct pci_bus; +extern int pcibus_to_node(struct pci_bus *); + +#define pcibus_to_cpumask(bus) (cpu_online_map) + +extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES]; + +#define node_distance(from, to) (__node_distances[(from)][(to)]) + +/* sched_domains SD_NODE_INIT for SGI IP27 machines */ +#define SD_NODE_INIT (struct sched_domain) { \ + .span = CPU_MASK_NONE, \ + .parent = NULL, \ + .child = NULL, \ + .groups = NULL, \ + .min_interval = 8, \ + .max_interval = 32, \ + .busy_factor = 32, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 1, \ + .flags = SD_LOAD_BALANCE \ + | SD_BALANCE_EXEC \ + | SD_WAKE_BALANCE, \ + .last_balance = jiffies, \ + .balance_interval = 1, \ + .nr_balance_failed = 0, \ +} + +#include <asm-generic/topology.h> + +#endif /* _ASM_MACH_TOPOLOGY_H */ diff --git a/arch/mips/include/asm/mach-ip27/war.h b/arch/mips/include/asm/mach-ip27/war.h new file mode 100644 index 000000000000..e2ddcc9b1fff --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_IP27_WAR_H +#define __ASM_MIPS_MACH_IP27_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 1 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_IP27_WAR_H */ diff --git a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h new file mode 100644 index 000000000000..9a53b326f848 --- /dev/null +++ b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h @@ -0,0 +1,50 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Ralf Baechle + * 6/2004 pf + */ +#ifndef __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H + +/* + * IP28 only comes with R10000 family processors all using the same config + */ +#define cpu_has_watch 1 +#define cpu_has_mips16 0 +#define cpu_has_divec 0 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases 0 /* see probe_pcache() */ +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_icache_snoops_remote_store 1 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 + +#define cpu_has_inclusive_pcaches 1 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 64 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-ip28/ds1286.h b/arch/mips/include/asm/mach-ip28/ds1286.h new file mode 100644 index 000000000000..471bb9a33e0f --- /dev/null +++ b/arch/mips/include/asm/mach-ip28/ds1286.h @@ -0,0 +1,4 @@ +#ifndef __ASM_MACH_IP28_DS1286_H +#define __ASM_MACH_IP28_DS1286_H +#include <asm/mach-ip22/ds1286.h> +#endif /* __ASM_MACH_IP28_DS1286_H */ diff --git a/arch/mips/include/asm/mach-ip28/spaces.h b/arch/mips/include/asm/mach-ip28/spaces.h new file mode 100644 index 000000000000..05aabb27e5e7 --- /dev/null +++ b/arch/mips/include/asm/mach-ip28/spaces.h @@ -0,0 +1,22 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. + * 2004 pf + */ +#ifndef _ASM_MACH_IP28_SPACES_H +#define _ASM_MACH_IP28_SPACES_H + +#define CAC_BASE 0xa800000000000000 + +#define HIGHMEM_START (~0UL) + +#define PHYS_OFFSET _AC(0x20000000, UL) + +#include <asm/mach-generic/spaces.h> + +#endif /* _ASM_MACH_IP28_SPACES_H */ diff --git a/arch/mips/include/asm/mach-ip28/war.h b/arch/mips/include/asm/mach-ip28/war.h new file mode 100644 index 000000000000..a1baafab486a --- /dev/null +++ b/arch/mips/include/asm/mach-ip28/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_IP28_WAR_H +#define __ASM_MIPS_MACH_IP28_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 1 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_IP28_WAR_H */ diff --git a/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h new file mode 100644 index 000000000000..6782fccebe8d --- /dev/null +++ b/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h @@ -0,0 +1,50 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Ilya A. Volynets-Evenbakh + * Copyright (C) 2005, 07 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H + + +/* + * R5000 has an interesting "restriction": ll(d)/sc(d) + * instructions to XKPHYS region simply do uncached bus + * requests. This breaks all the atomic bitops functions. + * so, for 64bit IP32 kernel we just don't use ll/sc. + * This does not affect luserland. + */ +#if (defined(CONFIG_CPU_R5000) || defined(CONFIG_CPU_NEVADA)) && defined(CONFIG_64BIT) +#define cpu_has_llsc 0 +#else +#define cpu_has_llsc 1 +#endif + +/* Settings which are common for all ip32 CPUs */ +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_fpu 1 +#define cpu_has_32fpr 1 +#define cpu_has_counter 1 +#define cpu_has_mips16 0 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 +#define cpu_has_vtag_icache 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_has_4k_cache 1 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h new file mode 100644 index 000000000000..a5511ebb2d53 --- /dev/null +++ b/arch/mips/include/asm/mach-ip32/dma-coherence.h @@ -0,0 +1,72 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org> + * + */ +#ifndef __ASM_MACH_IP32_DMA_COHERENCE_H +#define __ASM_MACH_IP32_DMA_COHERENCE_H + +#include <asm/ip32/crime.h> + +struct device; + +/* + * Few notes. + * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M + * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for + * native-endian) + * 3. All other devices see memory as one big chunk at 0x40000000 + * 4. Non-PCI devices will pass NULL as struct device* + * + * Thus we translate differently, depending on device. + */ + +#define RAM_OFFSET_MASK 0x3fffffffUL + +static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, + size_t size) +{ + dma_addr_t pa = virt_to_phys(addr) & RAM_OFFSET_MASK; + + if (dev == NULL) + pa += CRIME_HI_MEM_BASE; + + return pa; +} + +static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + dma_addr_t pa; + + pa = page_to_phys(page) & RAM_OFFSET_MASK; + + if (dev == NULL) + pa += CRIME_HI_MEM_BASE; + + return pa; +} + +/* This is almost certainly wrong but it's what dma-ip32.c used to use */ +static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + unsigned long addr = dma_addr & RAM_OFFSET_MASK; + + if (dma_addr >= 256*1024*1024) + addr += CRIME_HI_MEM_BASE; + + return addr; +} + +static inline void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 0; /* IP32 is non-cohernet */ +} + +#endif /* __ASM_MACH_IP32_DMA_COHERENCE_H */ diff --git a/arch/mips/include/asm/mach-ip32/kmalloc.h b/arch/mips/include/asm/mach-ip32/kmalloc.h new file mode 100644 index 000000000000..b1e0be60f720 --- /dev/null +++ b/arch/mips/include/asm/mach-ip32/kmalloc.h @@ -0,0 +1,11 @@ +#ifndef __ASM_MACH_IP32_KMALLOC_H +#define __ASM_MACH_IP32_KMALLOC_H + + +#if defined(CONFIG_CPU_R5000) || defined(CONFIG_CPU_RM7000) +#define ARCH_KMALLOC_MINALIGN 32 +#else +#define ARCH_KMALLOC_MINALIGN 128 +#endif + +#endif /* __ASM_MACH_IP32_KMALLOC_H */ diff --git a/arch/mips/include/asm/mach-ip32/mangle-port.h b/arch/mips/include/asm/mach-ip32/mangle-port.h new file mode 100644 index 000000000000..f1d0f1756a9f --- /dev/null +++ b/arch/mips/include/asm/mach-ip32/mangle-port.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Ladislav Michl + * Copyright (C) 2004 Ralf Baechle + */ +#ifndef __ASM_MACH_IP32_MANGLE_PORT_H +#define __ASM_MACH_IP32_MANGLE_PORT_H + +#define __swizzle_addr_b(port) ((port) ^ 3) +#define __swizzle_addr_w(port) ((port) ^ 2) +#define __swizzle_addr_l(port) (port) +#define __swizzle_addr_q(port) (port) + +# define ioswabb(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define __mem_ioswabw(a, x) cpu_to_le16(x) +# define ioswabl(a, x) (x) +# define __mem_ioswabl(a, x) cpu_to_le32(x) +# define ioswabq(a, x) (x) +# define __mem_ioswabq(a, x) cpu_to_le32(x) + +#endif /* __ASM_MACH_IP32_MANGLE_PORT_H */ diff --git a/arch/mips/include/asm/mach-ip32/mc146818rtc.h b/arch/mips/include/asm/mach-ip32/mc146818rtc.h new file mode 100644 index 000000000000..c28ba8d84076 --- /dev/null +++ b/arch/mips/include/asm/mach-ip32/mc146818rtc.h @@ -0,0 +1,36 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03 by Ralf Baechle + * Copyright (C) 2000 Harald Koerfgen + * + * RTC routines for IP32 style attached Dallas chip. + */ +#ifndef __ASM_MACH_IP32_MC146818RTC_H +#define __ASM_MACH_IP32_MC146818RTC_H + +#include <asm/ip32/mace.h> + +#define RTC_PORT(x) (0x70 + (x)) + +static unsigned char CMOS_READ(unsigned long addr) +{ + return mace->isa.rtc[addr << 8]; +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + mace->isa.rtc[addr << 8] = data; +} + +/* + * FIXME: Do it right. For now just assume that noone lives in 20th century + * and no O2 user in 22th century ;-) + */ +#define mc146818_decode_year(year) ((year) + 2000) + +#define RTC_ALWAYS_BCD 0 + +#endif /* __ASM_MACH_IP32_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-ip32/war.h b/arch/mips/include/asm/mach-ip32/war.h new file mode 100644 index 000000000000..d194056dcd7a --- /dev/null +++ b/arch/mips/include/asm/mach-ip32/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_IP32_WAR_H +#define __ASM_MIPS_MACH_IP32_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 1 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_IP32_WAR_H */ diff --git a/arch/mips/include/asm/mach-jazz/dma-coherence.h b/arch/mips/include/asm/mach-jazz/dma-coherence.h new file mode 100644 index 000000000000..d66979a124a8 --- /dev/null +++ b/arch/mips/include/asm/mach-jazz/dma-coherence.h @@ -0,0 +1,40 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MACH_JAZZ_DMA_COHERENCE_H +#define __ASM_MACH_JAZZ_DMA_COHERENCE_H + +#include <asm/jazzdma.h> + +struct device; + +static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) +{ + return vdma_alloc(virt_to_phys(addr), size); +} + +static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + return vdma_alloc(page_to_phys(page), PAGE_SIZE); +} + +static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return vdma_log2phys(dma_addr); +} + +static void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ + vdma_free(dma_addr); +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 0; +} + +#endif /* __ASM_MACH_JAZZ_DMA_COHERENCE_H */ diff --git a/arch/mips/include/asm/mach-jazz/floppy.h b/arch/mips/include/asm/mach-jazz/floppy.h new file mode 100644 index 000000000000..56e9ca6ae426 --- /dev/null +++ b/arch/mips/include/asm/mach-jazz/floppy.h @@ -0,0 +1,135 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2003 by Ralf Baechle + */ +#ifndef __ASM_MACH_JAZZ_FLOPPY_H +#define __ASM_MACH_JAZZ_FLOPPY_H + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/linkage.h> +#include <linux/types.h> +#include <linux/mm.h> +#include <asm/addrspace.h> +#include <asm/jazz.h> +#include <asm/jazzdma.h> +#include <asm/pgtable.h> + +static inline unsigned char fd_inb(unsigned int port) +{ + unsigned char c; + + c = *(volatile unsigned char *) port; + udelay(1); + + return c; +} + +static inline void fd_outb(unsigned char value, unsigned int port) +{ + *(volatile unsigned char *) port = value; +} + +/* + * How to access the floppy DMA functions. + */ +static inline void fd_enable_dma(void) +{ + vdma_enable(JAZZ_FLOPPY_DMA); +} + +static inline void fd_disable_dma(void) +{ + vdma_disable(JAZZ_FLOPPY_DMA); +} + +static inline int fd_request_dma(void) +{ + return 0; +} + +static inline void fd_free_dma(void) +{ +} + +static inline void fd_clear_dma_ff(void) +{ +} + +static inline void fd_set_dma_mode(char mode) +{ + vdma_set_mode(JAZZ_FLOPPY_DMA, mode); +} + +static inline void fd_set_dma_addr(char *a) +{ + vdma_set_addr(JAZZ_FLOPPY_DMA, vdma_phys2log(CPHYSADDR((unsigned long)a))); +} + +static inline void fd_set_dma_count(unsigned int count) +{ + vdma_set_count(JAZZ_FLOPPY_DMA, count); +} + +static inline int fd_get_dma_residue(void) +{ + return vdma_get_residue(JAZZ_FLOPPY_DMA); +} + +static inline void fd_enable_irq(void) +{ +} + +static inline void fd_disable_irq(void) +{ +} + +static inline int fd_request_irq(void) +{ + return request_irq(FLOPPY_IRQ, floppy_interrupt, + IRQF_DISABLED, "floppy", NULL); +} + +static inline void fd_free_irq(void) +{ + free_irq(FLOPPY_IRQ, NULL); +} + +static inline unsigned long fd_getfdaddr1(void) +{ + return JAZZ_FDC_BASE; +} + +static inline unsigned long fd_dma_mem_alloc(unsigned long size) +{ + unsigned long mem; + + mem = __get_dma_pages(GFP_KERNEL, get_order(size)); + if(!mem) + return 0; + vdma_alloc(CPHYSADDR(mem), size); /* XXX error checking */ + + return mem; +} + +static inline void fd_dma_mem_free(unsigned long addr, unsigned long size) +{ + vdma_free(vdma_phys2log(CPHYSADDR(addr))); + free_pages(addr, get_order(size)); +} + +static inline unsigned long fd_drive_type(unsigned long n) +{ + /* XXX This is wrong for machines with ED 2.88mb disk drives like the + Olivetti M700. Anyway, we should suck this from the ARC + firmware. */ + if (n == 0) + return 4; /* 3,5", 1.44mb */ + + return 0; +} + +#endif /* __ASM_MACH_JAZZ_FLOPPY_H */ diff --git a/arch/mips/include/asm/mach-jazz/mc146818rtc.h b/arch/mips/include/asm/mach-jazz/mc146818rtc.h new file mode 100644 index 000000000000..987f727afe25 --- /dev/null +++ b/arch/mips/include/asm/mach-jazz/mc146818rtc.h @@ -0,0 +1,38 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03 by Ralf Baechle + * Copyright (C) 2007 Thomas Bogendoerfer + * + * RTC routines for Jazz style attached Dallas chip. + */ +#ifndef __ASM_MACH_JAZZ_MC146818RTC_H +#define __ASM_MACH_JAZZ_MC146818RTC_H + +#include <linux/delay.h> + +#include <asm/io.h> +#include <asm/jazz.h> + +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_IRQ 8 + +static inline unsigned char CMOS_READ(unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + return *(volatile char *)JAZZ_RTC_BASE; +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + *(volatile char *)JAZZ_RTC_BASE = data; +} + +#define RTC_ALWAYS_BCD 0 + +#define mc146818_decode_year(year) ((year) + 1980) + +#endif /* __ASM_MACH_JAZZ_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-jazz/war.h b/arch/mips/include/asm/mach-jazz/war.h new file mode 100644 index 000000000000..6158ee861bfd --- /dev/null +++ b/arch/mips/include/asm/mach-jazz/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_JAZZ_WAR_H +#define __ASM_MIPS_MACH_JAZZ_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_JAZZ_WAR_H */ diff --git a/arch/mips/include/asm/mach-lasat/irq.h b/arch/mips/include/asm/mach-lasat/irq.h new file mode 100644 index 000000000000..3a282419d5f9 --- /dev/null +++ b/arch/mips/include/asm/mach-lasat/irq.h @@ -0,0 +1,13 @@ +#ifndef _ASM_MACH_LASAT_IRQ_H +#define _ASM_MACH_LASAT_IRQ_H + +#define LASAT_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 2) + +#define LASAT_IRQ_BASE 8 +#define LASAT_IRQ_END 23 + +#define NR_IRQS 24 + +#include_next <irq.h> + +#endif /* _ASM_MACH_LASAT_IRQ_H */ diff --git a/arch/mips/include/asm/mach-lasat/mach-gt64120.h b/arch/mips/include/asm/mach-lasat/mach-gt64120.h new file mode 100644 index 000000000000..1a9ad45cc135 --- /dev/null +++ b/arch/mips/include/asm/mach-lasat/mach-gt64120.h @@ -0,0 +1,27 @@ +/* + * This is a direct copy of the ev96100.h file, with a global + * search and replace. The numbers are the same. + * + * The reason I'm duplicating this is so that the 64120/96100 + * defines won't be confusing in the source code. + */ +#ifndef _ASM_GT64120_LASAT_GT64120_DEP_H +#define _ASM_GT64120_LASAT_GT64120_DEP_H + +/* + * GT64120 config space base address on Lasat 100 + */ +#define GT64120_BASE (KSEG1ADDR(0x14000000)) + +/* + * PCI Bus allocation + * + * (Guessing ...) + */ +#define GT_PCI_MEM_BASE 0x12000000UL +#define GT_PCI_MEM_SIZE 0x02000000UL +#define GT_PCI_IO_BASE 0x10000000UL +#define GT_PCI_IO_SIZE 0x02000000UL +#define GT_ISA_IO_BASE PCI_IO_BASE + +#endif /* _ASM_GT64120_LASAT_GT64120_DEP_H */ diff --git a/arch/mips/include/asm/mach-lasat/war.h b/arch/mips/include/asm/mach-lasat/war.h new file mode 100644 index 000000000000..bb1e0325c9be --- /dev/null +++ b/arch/mips/include/asm/mach-lasat/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_LASAT_WAR_H +#define __ASM_MIPS_MACH_LASAT_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_LASAT_WAR_H */ diff --git a/arch/mips/include/asm/mach-lemote/dma-coherence.h b/arch/mips/include/asm/mach-lemote/dma-coherence.h new file mode 100644 index 000000000000..7e914777ebc4 --- /dev/null +++ b/arch/mips/include/asm/mach-lemote/dma-coherence.h @@ -0,0 +1,42 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006, 07 Ralf Baechle <ralf@linux-mips.org> + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + */ +#ifndef __ASM_MACH_LEMOTE_DMA_COHERENCE_H +#define __ASM_MACH_LEMOTE_DMA_COHERENCE_H + +struct device; + +static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, + size_t size) +{ + return virt_to_phys(addr) | 0x80000000; +} + +static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, + struct page *page) +{ + return page_to_phys(page) | 0x80000000; +} + +static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return dma_addr & 0x7fffffff; +} + +static inline void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 0; +} + +#endif /* __ASM_MACH_LEMOTE_DMA_COHERENCE_H */ diff --git a/arch/mips/include/asm/mach-lemote/mc146818rtc.h b/arch/mips/include/asm/mach-lemote/mc146818rtc.h new file mode 100644 index 000000000000..ed5147e11085 --- /dev/null +++ b/arch/mips/include/asm/mach-lemote/mc146818rtc.h @@ -0,0 +1,36 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org) + * + * RTC routines for PC style attached Dallas chip. + */ +#ifndef __ASM_MACH_LEMOTE_MC146818RTC_H +#define __ASM_MACH_LEMOTE_MC146818RTC_H + +#include <linux/io.h> + +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_IRQ 8 + +static inline unsigned char CMOS_READ(unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + return inb_p(RTC_PORT(1)); +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + outb_p(data, RTC_PORT(1)); +} + +#define RTC_ALWAYS_BCD 0 + +#ifndef mc146818_decode_year +#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970) +#endif + +#endif /* __ASM_MACH_LEMOTE_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-lemote/war.h b/arch/mips/include/asm/mach-lemote/war.h new file mode 100644 index 000000000000..05f89e0f2a11 --- /dev/null +++ b/arch/mips/include/asm/mach-lemote/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_LEMOTE_WAR_H +#define __ASM_MIPS_MACH_LEMOTE_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_LEMOTE_WAR_H */ diff --git a/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h new file mode 100644 index 000000000000..7f3e3f9bd23a --- /dev/null +++ b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h @@ -0,0 +1,72 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Chris Dearman + * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H + + +/* + * CPU feature overrides for MIPS boards + */ +#ifdef CONFIG_CPU_MIPS32 +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +/* #define cpu_has_fpu ? */ +/* #define cpu_has_32fpr ? */ +#define cpu_has_counter 1 +/* #define cpu_has_watch ? */ +#define cpu_has_divec 1 +#define cpu_has_vce 0 +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_prefetch ? */ +#define cpu_has_mcheck 1 +/* #define cpu_has_ejtag ? */ +#ifdef CONFIG_CPU_HAS_LLSC +#define cpu_has_llsc 1 +#else +#define cpu_has_llsc 0 +#endif +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +#define cpu_has_nofpuex 0 +/* #define cpu_has_64bits ? */ +/* #define cpu_has_64bit_zero_reg ? */ +/* #define cpu_has_inclusive_pcaches ? */ +#define cpu_icache_snoops_remote_store 1 +#endif + +#ifdef CONFIG_CPU_MIPS64 +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +/* #define cpu_has_fpu ? */ +/* #define cpu_has_32fpr ? */ +#define cpu_has_counter 1 +/* #define cpu_has_watch ? */ +#define cpu_has_divec 1 +#define cpu_has_vce 0 +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_prefetch ? */ +#define cpu_has_mcheck 1 +/* #define cpu_has_ejtag ? */ +#define cpu_has_llsc 1 +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +#define cpu_has_nofpuex 0 +/* #define cpu_has_64bits ? */ +/* #define cpu_has_64bit_zero_reg ? */ +/* #define cpu_has_inclusive_pcaches ? */ +#define cpu_icache_snoops_remote_store 1 +#endif + +#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-malta/irq.h b/arch/mips/include/asm/mach-malta/irq.h new file mode 100644 index 000000000000..9b9da26683c2 --- /dev/null +++ b/arch/mips/include/asm/mach-malta/irq.h @@ -0,0 +1,9 @@ +#ifndef __ASM_MACH_MIPS_IRQ_H +#define __ASM_MACH_MIPS_IRQ_H + + +#define NR_IRQS 256 + +#include_next <irq.h> + +#endif /* __ASM_MACH_MIPS_IRQ_H */ diff --git a/arch/mips/include/asm/mach-malta/kernel-entry-init.h b/arch/mips/include/asm/mach-malta/kernel-entry-init.h new file mode 100644 index 000000000000..0b793e7bf67e --- /dev/null +++ b/arch/mips/include/asm/mach-malta/kernel-entry-init.h @@ -0,0 +1,52 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Chris Dearman (chris@mips.com) + * Copyright (C) 2007 Mips Technologies, Inc. + */ +#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H +#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H + + .macro kernel_entry_setup +#ifdef CONFIG_MIPS_MT_SMTC + mfc0 t0, CP0_CONFIG + bgez t0, 9f + mfc0 t0, CP0_CONFIG, 1 + bgez t0, 9f + mfc0 t0, CP0_CONFIG, 2 + bgez t0, 9f + mfc0 t0, CP0_CONFIG, 3 + and t0, 1<<2 + bnez t0, 0f +9: + /* Assume we came from YAMON... */ + PTR_LA v0, 0x9fc00534 /* YAMON print */ + lw v0, (v0) + move a0, zero + PTR_LA a1, nonmt_processor + jal v0 + + PTR_LA v0, 0x9fc00520 /* YAMON exit */ + lw v0, (v0) + li a0, 1 + jal v0 + +1: b 1b + + __INITDATA +nonmt_processor: + .asciz "SMTC kernel requires the MT ASE to run\n" + __FINIT +0: +#endif + .endm + +/* + * Do SMP slave processor setup necessary before we can safely execute C code. + */ + .macro smp_slave_setup + .endm + +#endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */ diff --git a/arch/mips/include/asm/mach-malta/mach-gt64120.h b/arch/mips/include/asm/mach-malta/mach-gt64120.h new file mode 100644 index 000000000000..0f863148f3b6 --- /dev/null +++ b/arch/mips/include/asm/mach-malta/mach-gt64120.h @@ -0,0 +1,19 @@ +/* + * This is a direct copy of the ev96100.h file, with a global + * search and replace. The numbers are the same. + * + * The reason I'm duplicating this is so that the 64120/96100 + * defines won't be confusing in the source code. + */ +#ifndef _ASM_MACH_MIPS_MACH_GT64120_DEP_H +#define _ASM_MACH_MIPS_MACH_GT64120_DEP_H + +#define MIPS_GT_BASE 0x1be00000 + +extern unsigned long _pcictrl_gt64120; +/* + * GT64120 config space base address + */ +#define GT64120_BASE _pcictrl_gt64120 + +#endif /* _ASM_MACH_MIPS_MACH_GT64120_DEP_H */ diff --git a/arch/mips/include/asm/mach-malta/mc146818rtc.h b/arch/mips/include/asm/mach-malta/mc146818rtc.h new file mode 100644 index 000000000000..ea612f37f614 --- /dev/null +++ b/arch/mips/include/asm/mach-malta/mc146818rtc.h @@ -0,0 +1,48 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2003 by Ralf Baechle + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * RTC routines for Malta style attached PIIX4 device, which contains a + * Motorola MC146818A-compatible Real Time Clock. + */ +#ifndef __ASM_MACH_MALTA_MC146818RTC_H +#define __ASM_MACH_MALTA_MC146818RTC_H + +#include <asm/io.h> +#include <asm/mips-boards/generic.h> +#include <asm/mips-boards/malta.h> + +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_IRQ 8 + +static inline unsigned char CMOS_READ(unsigned long addr) +{ + outb(addr, MALTA_RTC_ADR_REG); + return inb(MALTA_RTC_DAT_REG); +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + outb(addr, MALTA_RTC_ADR_REG); + outb(data, MALTA_RTC_DAT_REG); +} + +#define RTC_ALWAYS_BCD 0 + +#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900) + +#endif /* __ASM_MACH_MALTA_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-malta/war.h b/arch/mips/include/asm/mach-malta/war.h new file mode 100644 index 000000000000..7c6931d5f45f --- /dev/null +++ b/arch/mips/include/asm/mach-malta/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_MIPS_WAR_H +#define __ASM_MIPS_MACH_MIPS_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 1 +#define MIPS_CACHE_SYNC_WAR 1 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 1 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */ diff --git a/arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h b/arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h new file mode 100644 index 000000000000..779b02205737 --- /dev/null +++ b/arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h @@ -0,0 +1,65 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Chris Dearman + */ +#ifndef __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H + + +/* + * CPU feature overrides for MIPS boards + */ +#ifdef CONFIG_CPU_MIPS32 +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +#define cpu_has_fpu 0 +/* #define cpu_has_32fpr ? */ +#define cpu_has_counter 1 +/* #define cpu_has_watch ? */ +#define cpu_has_divec 1 +#define cpu_has_vce 0 +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_prefetch ? */ +#define cpu_has_mcheck 1 +/* #define cpu_has_ejtag ? */ +#define cpu_has_llsc 1 +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +#define cpu_has_nofpuex 0 +/* #define cpu_has_64bits ? */ +/* #define cpu_has_64bit_zero_reg ? */ +/* #define cpu_has_inclusive_pcaches ? */ +#endif + +#ifdef CONFIG_CPU_MIPS64 +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +/* #define cpu_has_fpu ? */ +/* #define cpu_has_32fpr ? */ +#define cpu_has_counter 1 +/* #define cpu_has_watch ? */ +#define cpu_has_divec 1 +#define cpu_has_vce 0 +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_prefetch ? */ +#define cpu_has_mcheck 1 +/* #define cpu_has_ejtag ? */ +#define cpu_has_llsc 1 +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +#define cpu_has_nofpuex 0 +/* #define cpu_has_64bits ? */ +/* #define cpu_has_64bit_zero_reg ? */ +/* #define cpu_has_inclusive_pcaches ? */ +#endif + +#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-mipssim/war.h b/arch/mips/include/asm/mach-mipssim/war.h new file mode 100644 index 000000000000..c8a74a3515e0 --- /dev/null +++ b/arch/mips/include/asm/mach-mipssim/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_MIPSSIM_WAR_H +#define __ASM_MIPS_MACH_MIPSSIM_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_MIPSSIM_WAR_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h b/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h new file mode 100644 index 000000000000..622c58710e5b --- /dev/null +++ b/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h @@ -0,0 +1,34 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03 by Ralf Baechle + * + * RTC routines for PC style attached Dallas chip. + */ +#ifndef __ASM_MACH_AU1XX_MC146818RTC_H +#define __ASM_MACH_AU1XX_MC146818RTC_H + +#include <asm/io.h> +#include <asm/mach-au1x00/au1000.h> + +#define RTC_PORT(x) (0x0c000000 + (x)) +#define RTC_IRQ 8 +#define PB1500_RTC_ADDR 0x0c000000 + +static inline unsigned char CMOS_READ(unsigned long offset) +{ + offset <<= 2; + return (u8)(au_readl(offset + PB1500_RTC_ADDR) & 0xff); +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long offset) +{ + offset <<= 2; + au_writel(data, offset + PB1500_RTC_ADDR); +} + +#define RTC_ALWAYS_BCD 1 + +#endif /* __ASM_MACH_AU1XX_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1000.h b/arch/mips/include/asm/mach-pb1x00/pb1000.h new file mode 100644 index 000000000000..6d1ff9060e44 --- /dev/null +++ b/arch/mips/include/asm/mach-pb1x00/pb1000.h @@ -0,0 +1,87 @@ +/* + * Alchemy Semi Pb1000 Referrence Board + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_PB1000_H +#define __ASM_PB1000_H + +/* PCMCIA PB1000 specific defines */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +#define PB1000_PCR 0xBE000000 +# define PCR_SLOT_0_VPP0 (1 << 0) +# define PCR_SLOT_0_VPP1 (1 << 1) +# define PCR_SLOT_0_VCC0 (1 << 2) +# define PCR_SLOT_0_VCC1 (1 << 3) +# define PCR_SLOT_0_RST (1 << 4) +# define PCR_SLOT_1_VPP0 (1 << 8) +# define PCR_SLOT_1_VPP1 (1 << 9) +# define PCR_SLOT_1_VCC0 (1 << 10) +# define PCR_SLOT_1_VCC1 (1 << 11) +# define PCR_SLOT_1_RST (1 << 12) + +#define PB1000_MDR 0xBE000004 +# define MDR_PI (1 << 5) /* PCMCIA int latch */ +# define MDR_EPI (1 << 14) /* enable PCMCIA int */ +# define MDR_CPI (1 << 15) /* clear PCMCIA int */ + +#define PB1000_ACR1 0xBE000008 +# define ACR1_SLOT_0_CD1 (1 << 0) /* card detect 1 */ +# define ACR1_SLOT_0_CD2 (1 << 1) /* card detect 2 */ +# define ACR1_SLOT_0_READY (1 << 2) /* ready */ +# define ACR1_SLOT_0_STATUS (1 << 3) /* status change */ +# define ACR1_SLOT_0_VS1 (1 << 4) /* voltage sense 1 */ +# define ACR1_SLOT_0_VS2 (1 << 5) /* voltage sense 2 */ +# define ACR1_SLOT_0_INPACK (1 << 6) /* inpack pin status */ +# define ACR1_SLOT_1_CD1 (1 << 8) /* card detect 1 */ +# define ACR1_SLOT_1_CD2 (1 << 9) /* card detect 2 */ +# define ACR1_SLOT_1_READY (1 << 10) /* ready */ +# define ACR1_SLOT_1_STATUS (1 << 11) /* status change */ +# define ACR1_SLOT_1_VS1 (1 << 12) /* voltage sense 1 */ +# define ACR1_SLOT_1_VS2 (1 << 13) /* voltage sense 2 */ +# define ACR1_SLOT_1_INPACK (1 << 14) /* inpack pin status */ + +#define CPLD_AUX0 0xBE00000C +#define CPLD_AUX1 0xBE000010 +#define CPLD_AUX2 0xBE000014 + +/* Voltage levels */ + +/* VPPEN1 - VPPEN0 */ +#define VPP_GND ((0 << 1) | (0 << 0)) +#define VPP_5V ((1 << 1) | (0 << 0)) +#define VPP_3V ((0 << 1) | (1 << 0)) +#define VPP_12V ((0 << 1) | (1 << 0)) +#define VPP_HIZ ((1 << 1) | (1 << 0)) + +/* VCCEN1 - VCCEN0 */ +#define VCC_3V ((0 << 1) | (1 << 0)) +#define VCC_5V ((1 << 1) | (0 << 0)) +#define VCC_HIZ ((0 << 1) | (0 << 0)) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) +#endif /* __ASM_PB1000_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1100.h b/arch/mips/include/asm/mach-pb1x00/pb1100.h new file mode 100644 index 000000000000..b1a60f1cbd02 --- /dev/null +++ b/arch/mips/include/asm/mach-pb1x00/pb1100.h @@ -0,0 +1,85 @@ +/* + * Alchemy Semi Pb1100 Referrence Board + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_PB1100_H +#define __ASM_PB1100_H + +#define PB1100_IDENT 0xAE000000 +#define BOARD_STATUS_REG 0xAE000004 +# define PB1100_ROM_SEL (1 << 15) +# define PB1100_ROM_SIZ (1 << 14) +# define PB1100_SWAP_BOOT (1 << 13) +# define PB1100_FLASH_WP (1 << 12) +# define PB1100_ROM_H_STS (1 << 11) +# define PB1100_ROM_L_STS (1 << 10) +# define PB1100_FLASH_H_STS (1 << 9) +# define PB1100_FLASH_L_STS (1 << 8) +# define PB1100_SRAM_SIZ (1 << 7) +# define PB1100_TSC_BUSY (1 << 6) +# define PB1100_PCMCIA_VS_MASK (3 << 4) +# define PB1100_RS232_CD (1 << 3) +# define PB1100_RS232_CTS (1 << 2) +# define PB1100_RS232_DSR (1 << 1) +# define PB1100_RS232_RI (1 << 0) + +#define PB1100_IRDA_RS232 0xAE00000C +# define PB1100_IRDA_FULL (0 << 14) /* full power */ +# define PB1100_IRDA_SHUTDOWN (1 << 14) +# define PB1100_IRDA_TT (2 << 14) /* 2/3 power */ +# define PB1100_IRDA_OT (3 << 14) /* 1/3 power */ +# define PB1100_IRDA_FIR (1 << 13) + +#define PCMCIA_BOARD_REG 0xAE000010 +# define PB1100_SD_WP1_RO (1 << 15) /* read only */ +# define PB1100_SD_WP0_RO (1 << 14) /* read only */ +# define PB1100_SD_PWR1 (1 << 11) /* applies power to SD1 */ +# define PB1100_SD_PWR0 (1 << 10) /* applies power to SD0 */ +# define PB1100_SEL_SD_CONN1 (1 << 9) +# define PB1100_SEL_SD_CONN0 (1 << 8) +# define PC_DEASSERT_RST (1 << 7) +# define PC_DRV_EN (1 << 4) + +#define PB1100_G_CONTROL 0xAE000014 /* graphics control */ + +#define PB1100_RST_VDDI 0xAE00001C +# define PB1100_SOFT_RESET (1 << 15) /* clear to reset the board */ +# define PB1100_VDDI_MASK 0x1F + +#define PB1100_LEDS 0xAE000018 + +/* + * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED. + * 7:0 is the LED Display's decimal points. + */ +#define PB1100_HEX_LED 0xAE000018 + +/* PCMCIA Pb1100 specific defines */ +#define PCMCIA_MAX_SOCK 0 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0)) + +#endif /* __ASM_PB1100_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h new file mode 100644 index 000000000000..c8618df88cb5 --- /dev/null +++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h @@ -0,0 +1,259 @@ +/* + * AMD Alchemy Pb1200 Referrence Board + * Board Registers defines. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_PB1200_H +#define __ASM_PB1200_H + +#include <linux/types.h> +#include <asm/mach-au1x00/au1xxx_psc.h> + +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX + +/* + * SPI and SMB are muxed on the Pb1200 board. + * Refer to board documentation. + */ +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define SMBUS_PSC_BASE PSC0_BASE_ADDR +/* + * AC97 and I2S are muxed on the Pb1200 board. + * Refer to board documentation. + */ +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define I2S_PSC_BASE PSC1_BASE_ADDR + +#define BCSR_KSEG1_ADDR 0xAD800000 + +typedef volatile struct +{ + /*00*/ u16 whoami; + u16 reserved0; + /*04*/ u16 status; + u16 reserved1; + /*08*/ u16 switches; + u16 reserved2; + /*0C*/ u16 resets; + u16 reserved3; + + /*10*/ u16 pcmcia; + u16 reserved4; + /*14*/ u16 board; + u16 reserved5; + /*18*/ u16 disk_leds; + u16 reserved6; + /*1C*/ u16 system; + u16 reserved7; + + /*20*/ u16 intclr; + u16 reserved8; + /*24*/ u16 intset; + u16 reserved9; + /*28*/ u16 intclr_mask; + u16 reserved10; + /*2C*/ u16 intset_mask; + u16 reserved11; + + /*30*/ u16 sig_status; + u16 reserved12; + /*34*/ u16 int_status; + u16 reserved13; + /*38*/ u16 reserved14; + u16 reserved15; + /*3C*/ u16 reserved16; + u16 reserved17; + +} BCSR; + +static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + +/* + * Register bit definitions for the BCSRs + */ +#define BCSR_WHOAMI_DCID 0x000F +#define BCSR_WHOAMI_CPLD 0x00F0 +#define BCSR_WHOAMI_BOARD 0x0F00 + +#define BCSR_STATUS_PCMCIA0VS 0x0003 +#define BCSR_STATUS_PCMCIA1VS 0x000C +#define BCSR_STATUS_SWAPBOOT 0x0040 +#define BCSR_STATUS_FLASHBUSY 0x0100 +#define BCSR_STATUS_IDECBLID 0x0200 +#define BCSR_STATUS_SD0WP 0x0400 +#define BCSR_STATUS_SD1WP 0x0800 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 + +#define BCSR_SWITCHES_OCTAL 0x00FF +#define BCSR_SWITCHES_DIP_1 0x0080 +#define BCSR_SWITCHES_DIP_2 0x0040 +#define BCSR_SWITCHES_DIP_3 0x0020 +#define BCSR_SWITCHES_DIP_4 0x0010 +#define BCSR_SWITCHES_DIP_5 0x0008 +#define BCSR_SWITCHES_DIP_6 0x0004 +#define BCSR_SWITCHES_DIP_7 0x0002 +#define BCSR_SWITCHES_DIP_8 0x0001 +#define BCSR_SWITCHES_ROTARY 0x0F00 + +#define BCSR_RESETS_ETH 0x0001 +#define BCSR_RESETS_CAMERA 0x0002 +#define BCSR_RESETS_DC 0x0004 +#define BCSR_RESETS_IDE 0x0008 +/* not resets but in the same register */ +#define BCSR_RESETS_WSCFSM 0x0800 +#define BCSR_RESETS_PCS0MUX 0x1000 +#define BCSR_RESETS_PCS1MUX 0x2000 +#define BCSR_RESETS_SPISEL 0x4000 +#define BCSR_RESETS_SD1MUX 0x8000 + +#define BCSR_PCMCIA_PC0VPP 0x0003 +#define BCSR_PCMCIA_PC0VCC 0x000C +#define BCSR_PCMCIA_PC0DRVEN 0x0010 +#define BCSR_PCMCIA_PC0RST 0x0080 +#define BCSR_PCMCIA_PC1VPP 0x0300 +#define BCSR_PCMCIA_PC1VCC 0x0C00 +#define BCSR_PCMCIA_PC1DRVEN 0x1000 +#define BCSR_PCMCIA_PC1RST 0x8000 + +#define BCSR_BOARD_LCDVEE 0x0001 +#define BCSR_BOARD_LCDVDD 0x0002 +#define BCSR_BOARD_LCDBL 0x0004 +#define BCSR_BOARD_CAMSNAP 0x0010 +#define BCSR_BOARD_CAMPWR 0x0020 +#define BCSR_BOARD_SD0PWR 0x0040 +#define BCSR_BOARD_SD1PWR 0x0080 + +#define BCSR_LEDS_DECIMALS 0x00FF +#define BCSR_LEDS_LED0 0x0100 +#define BCSR_LEDS_LED1 0x0200 +#define BCSR_LEDS_LED2 0x0400 +#define BCSR_LEDS_LED3 0x0800 + +#define BCSR_SYSTEM_VDDI 0x001F +#define BCSR_SYSTEM_POWEROFF 0x4000 +#define BCSR_SYSTEM_RESET 0x8000 + +/* Bit positions for the different interrupt sources */ +#define BCSR_INT_IDE 0x0001 +#define BCSR_INT_ETH 0x0002 +#define BCSR_INT_PC0 0x0004 +#define BCSR_INT_PC0STSCHG 0x0008 +#define BCSR_INT_PC1 0x0010 +#define BCSR_INT_PC1STSCHG 0x0020 +#define BCSR_INT_DC 0x0040 +#define BCSR_INT_FLASHBUSY 0x0080 +#define BCSR_INT_PC0INSERT 0x0100 +#define BCSR_INT_PC0EJECT 0x0200 +#define BCSR_INT_PC1INSERT 0x0400 +#define BCSR_INT_PC1EJECT 0x0800 +#define BCSR_INT_SD0INSERT 0x1000 +#define BCSR_INT_SD0EJECT 0x2000 +#define BCSR_INT_SD1INSERT 0x4000 +#define BCSR_INT_SD1EJECT 0x8000 + +#define SMC91C111_PHYS_ADDR 0x0D000300 +#define SMC91C111_INT PB1200_ETH_INT + +#define IDE_PHYS_ADDR 0x0C800000 +#define IDE_REG_SHIFT 5 +#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT) +#define IDE_INT PB1200_IDE_INT +#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 +#define IDE_RQSIZE 128 + +#define NAND_PHYS_ADDR 0x1C000000 + +/* + * Timing values as described in databook, * ns value stripped of + * lower 2 bits. + * These defines are here rather than an Au1200 generic file because + * the parts chosen on another board may be different and may require + * different timings. + */ +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) + +/* Bitfield shift amounts */ +#define NAND_T_H_SHIFT 0 +#define NAND_T_PUL_SHIFT 4 +#define NAND_T_SU_SHIFT 8 +#define NAND_T_WH_SHIFT 12 + +#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) + +/* + * External Interrupts for Pb1200 as of 8/6/2004. + * Bit positions in the CPLD registers can be calculated by taking + * the interrupt define and subtracting the PB1200_INT_BEGIN value. + * + * Example: IDE bis pos is = 64 - 64 + * ETH bit pos is = 65 - 64 + */ +enum external_pb1200_ints { + PB1200_INT_BEGIN = AU1000_MAX_INTR + 1, + + PB1200_IDE_INT = PB1200_INT_BEGIN, + PB1200_ETH_INT, + PB1200_PC0_INT, + PB1200_PC0_STSCHG_INT, + PB1200_PC1_INT, + PB1200_PC1_STSCHG_INT, + PB1200_DC_INT, + PB1200_FLASHBUSY_INT, + PB1200_PC0_INSERT_INT, + PB1200_PC0_EJECT_INT, + PB1200_PC1_INSERT_INT, + PB1200_PC1_EJECT_INT, + PB1200_SD0_INSERT_INT, + PB1200_SD0_EJECT_INT, + PB1200_SD1_INSERT_INT, + PB1200_SD1_EJECT_INT, + + PB1200_INT_END = PB1200_INT_BEGIN + 15 +}; + +/* + * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c + */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) + +#define BOARD_PC0_INT PB1200_PC0_INT +#define BOARD_PC1_INT PB1200_PC1_INT +#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) + +/* NAND chip select */ +#define NAND_CS 1 + +#endif /* __ASM_PB1200_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1500.h b/arch/mips/include/asm/mach-pb1x00/pb1500.h new file mode 100644 index 000000000000..da51a2eb7b82 --- /dev/null +++ b/arch/mips/include/asm/mach-pb1x00/pb1500.h @@ -0,0 +1,49 @@ +/* + * Alchemy Semi Pb1500 Referrence Board + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_PB1500_H +#define __ASM_PB1500_H + +#define IDENT_BOARD_REG 0xAE000000 +#define BOARD_STATUS_REG 0xAE000004 +#define PCI_BOARD_REG 0xAE000010 +#define PCMCIA_BOARD_REG 0xAE000010 +# define PC_DEASSERT_RST 0x80 +# define PC_DRV_EN 0x10 +#define PB1500_G_CONTROL 0xAE000014 +#define PB1500_RST_VDDI 0xAE00001C +#define PB1500_LEDS 0xAE000018 + +#define PB1500_HEX_LED 0xAF000004 +#define PB1500_HEX_LED_BLANK 0xAF000008 + +/* PCMCIA Pb1500 specific defines */ +#define PCMCIA_MAX_SOCK 0 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0)) + +#endif /* __ASM_PB1500_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h new file mode 100644 index 000000000000..6704a11497db --- /dev/null +++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h @@ -0,0 +1,177 @@ +/* + * AMD Alchemy Semi PB1550 Referrence Board + * Board Registers defines. + * + * Copyright 2004 Embedded Edge LLC. + * Copyright 2005 Ralf Baechle (ralf@linux-mips.org) + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_PB1550_H +#define __ASM_PB1550_H + +#include <linux/types.h> +#include <asm/mach-au1x00/au1xxx_psc.h> + +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX + +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define SMBUS_PSC_BASE PSC2_BASE_ADDR +#define I2S_PSC_BASE PSC3_BASE_ADDR + +#define BCSR_PHYS_ADDR 0xAF000000 + +typedef volatile struct +{ + /*00*/ u16 whoami; + u16 reserved0; + /*04*/ u16 status; + u16 reserved1; + /*08*/ u16 switches; + u16 reserved2; + /*0C*/ u16 resets; + u16 reserved3; + /*10*/ u16 pcmcia; + u16 reserved4; + /*14*/ u16 pci; + u16 reserved5; + /*18*/ u16 leds; + u16 reserved6; + /*1C*/ u16 system; + u16 reserved7; + +} BCSR; + +static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; + +/* + * Register bit definitions for the BCSRs + */ +#define BCSR_WHOAMI_DCID 0x000F +#define BCSR_WHOAMI_CPLD 0x00F0 +#define BCSR_WHOAMI_BOARD 0x0F00 + +#define BCSR_STATUS_PCMCIA0VS 0x0003 +#define BCSR_STATUS_PCMCIA1VS 0x000C +#define BCSR_STATUS_PCMCIA0FI 0x0010 +#define BCSR_STATUS_PCMCIA1FI 0x0020 +#define BCSR_STATUS_SWAPBOOT 0x0040 +#define BCSR_STATUS_SRAMWIDTH 0x0080 +#define BCSR_STATUS_FLASHBUSY 0x0100 +#define BCSR_STATUS_ROMBUSY 0x0200 +#define BCSR_STATUS_USBOTGID 0x0800 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 +#define BCSR_STATUS_U3RXD 0x8000 + +#define BCSR_SWITCHES_OCTAL 0x00FF +#define BCSR_SWITCHES_DIP_1 0x0080 +#define BCSR_SWITCHES_DIP_2 0x0040 +#define BCSR_SWITCHES_DIP_3 0x0020 +#define BCSR_SWITCHES_DIP_4 0x0010 +#define BCSR_SWITCHES_DIP_5 0x0008 +#define BCSR_SWITCHES_DIP_6 0x0004 +#define BCSR_SWITCHES_DIP_7 0x0002 +#define BCSR_SWITCHES_DIP_8 0x0001 +#define BCSR_SWITCHES_ROTARY 0x0F00 + +#define BCSR_RESETS_PHY0 0x0001 +#define BCSR_RESETS_PHY1 0x0002 +#define BCSR_RESETS_DC 0x0004 +#define BCSR_RESETS_WSC 0x2000 +#define BCSR_RESETS_SPISEL 0x4000 +#define BCSR_RESETS_DMAREQ 0x8000 + +#define BCSR_PCMCIA_PC0VPP 0x0003 +#define BCSR_PCMCIA_PC0VCC 0x000C +#define BCSR_PCMCIA_PC0DRVEN 0x0010 +#define BCSR_PCMCIA_PC0RST 0x0080 +#define BCSR_PCMCIA_PC1VPP 0x0300 +#define BCSR_PCMCIA_PC1VCC 0x0C00 +#define BCSR_PCMCIA_PC1DRVEN 0x1000 +#define BCSR_PCMCIA_PC1RST 0x8000 + +#define BCSR_PCI_M66EN 0x0001 +#define BCSR_PCI_M33 0x0100 +#define BCSR_PCI_EXTERNARB 0x0200 +#define BCSR_PCI_GPIO200RST 0x0400 +#define BCSR_PCI_CLKOUT 0x0800 +#define BCSR_PCI_CFGHOST 0x1000 + +#define BCSR_LEDS_DECIMALS 0x00FF +#define BCSR_LEDS_LED0 0x0100 +#define BCSR_LEDS_LED1 0x0200 +#define BCSR_LEDS_LED2 0x0400 +#define BCSR_LEDS_LED3 0x0800 + +#define BCSR_SYSTEM_VDDI 0x001F +#define BCSR_SYSTEM_POWEROFF 0x4000 +#define BCSR_SYSTEM_RESET 0x8000 + +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) + +#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER) +#define PB1550_BOTH_BANKS +#elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER) +#define PB1550_BOOT_ONLY +#elif !defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER) +#define PB1550_USER_ONLY +#endif + +/* + * Timing values as described in databook, * ns value stripped of + * lower 2 bits. + * These defines are here rather than an SOC1550 generic file because + * the parts chosen on another board may be different and may require + * different timings. + */ +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) + +/* Bitfield shift amounts */ +#define NAND_T_H_SHIFT 0 +#define NAND_T_PUL_SHIFT 4 +#define NAND_T_SU_SHIFT 8 +#define NAND_T_WH_SHIFT 12 + +#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) + +#define NAND_CS 1 + +/* Should be done by YAMON */ +#define NAND_STCFG 0x00400005 /* 8-bit NAND */ +#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ +#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ + +#endif /* __ASM_PB1550_H */ diff --git a/arch/mips/include/asm/mach-pnx8550/cm.h b/arch/mips/include/asm/mach-pnx8550/cm.h new file mode 100644 index 000000000000..bb0a56c7d011 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/cm.h @@ -0,0 +1,43 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Clock module specific definitions + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef __PNX8550_CM_H +#define __PNX8550_CM_H + +#define PNX8550_CM_BASE 0xBBE47000 + +#define PNX8550_CM_PLL0_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x000) +#define PNX8550_CM_PLL1_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x004) +#define PNX8550_CM_PLL2_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x008) +#define PNX8550_CM_PLL3_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x00C) + +// Table not complete..... + +#define PNX8550_CM_PLL_BLOCKED_MASK 0x80000000 +#define PNX8550_CM_PLL_LOCK_MASK 0x40000000 +#define PNX8550_CM_PLL_CURRENT_ADJ_MASK 0x3c000000 +#define PNX8550_CM_PLL_N_MASK 0x01ff0000 +#define PNX8550_CM_PLL_M_MASK 0x00003f00 +#define PNX8550_CM_PLL_P_MASK 0x0000000c +#define PNX8550_CM_PLL_PD_MASK 0x00000002 + + +#endif diff --git a/arch/mips/include/asm/mach-pnx8550/glb.h b/arch/mips/include/asm/mach-pnx8550/glb.h new file mode 100644 index 000000000000..07aa85e609bc --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/glb.h @@ -0,0 +1,86 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PNX8550 global definitions + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef __PNX8550_GLB_H +#define __PNX8550_GLB_H + +#define PNX8550_GLB1_BASE 0xBBE63000 +#define PNX8550_GLB2_BASE 0xBBE4d000 +#define PNX8550_RESET_BASE 0xBBE60000 + +/* PCI Inta Output Enable Registers */ +#define PNX8550_GLB2_ENAB_INTA_O *(volatile unsigned long *)(PNX8550_GLB2_BASE + 0x050) + +/* Bit 1:Enable DAC Powerdown + 0:DACs are enabled and are working normally + 1:DACs are powerdown +*/ +#define PNX8550_GLB_DAC_PD 0x2 +/* Bit 0:Enable of PCI inta output + 0 = Disable PCI inta output + 1 = Enable PCI inta output +*/ +#define PNX8550_GLB_ENABLE_INTA_O 0x1 + +/* PCI Direct Mappings */ +#define PNX8550_PCIMEM 0x12000000 +#define PNX8550_PCIMEM_SIZE 0x08000000 +#define PNX8550_PCIIO 0x1c000000 +#define PNX8550_PCIIO_SIZE 0x02000000 /* 32M */ + +#define PNX8550_PORT_BASE KSEG1 + +// GPIO def +#define PNX8550_GPIO_BASE 0x1Be00000 + +#define PNX8550_GPIO_DIRQ0 (PNX8550_GPIO_BASE + 0x104500) +#define PNX8550_GPIO_MC1 (PNX8550_GPIO_BASE + 0x104004) +#define PNX8550_GPIO_MC_31_BIT 30 +#define PNX8550_GPIO_MC_30_BIT 28 +#define PNX8550_GPIO_MC_29_BIT 26 +#define PNX8550_GPIO_MC_28_BIT 24 +#define PNX8550_GPIO_MC_27_BIT 22 +#define PNX8550_GPIO_MC_26_BIT 20 +#define PNX8550_GPIO_MC_25_BIT 18 +#define PNX8550_GPIO_MC_24_BIT 16 +#define PNX8550_GPIO_MC_23_BIT 14 +#define PNX8550_GPIO_MC_22_BIT 12 +#define PNX8550_GPIO_MC_21_BIT 10 +#define PNX8550_GPIO_MC_20_BIT 8 +#define PNX8550_GPIO_MC_19_BIT 6 +#define PNX8550_GPIO_MC_18_BIT 4 +#define PNX8550_GPIO_MC_17_BIT 2 +#define PNX8550_GPIO_MC_16_BIT 0 + +#define PNX8550_GPIO_MODE_PRIMOP 0x1 +#define PNX8550_GPIO_MODE_NO_OPENDR 0x2 +#define PNX8550_GPIO_MODE_OPENDR 0x3 + +// RESET module +#define PNX8550_RST_CTL *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x0) +#define PNX8550_RST_CAUSE *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x4) +#define PNX8550_RST_EN_WATCHDOG *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x8) + +#define PNX8550_RST_REL_MIPS_RST_N 0x8 +#define PNX8550_RST_DO_SW_RST 0x4 +#define PNX8550_RST_REL_SYS_RST_OUT 0x2 +#define PNX8550_RST_ASSERT_SYS_RST_OUT 0x1 +#endif diff --git a/arch/mips/include/asm/mach-pnx8550/int.h b/arch/mips/include/asm/mach-pnx8550/int.h new file mode 100644 index 000000000000..0e0668b524f4 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/int.h @@ -0,0 +1,140 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Interrupt specific definitions + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef __PNX8550_INT_H +#define __PNX8550_INT_H + +#define PNX8550_GIC_BASE 0xBBE3E000 + +#define PNX8550_GIC_PRIMASK_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x000) +#define PNX8550_GIC_PRIMASK_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x004) +#define PNX8550_GIC_VECTOR_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x100) +#define PNX8550_GIC_VECTOR_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x104) +#define PNX8550_GIC_PEND_1_31 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x200) +#define PNX8550_GIC_PEND_32_63 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x204) +#define PNX8550_GIC_PEND_64_70 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x208) +#define PNX8550_GIC_FEATURES *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x300) +#define PNX8550_GIC_REQ(x) *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x400 + (x)*4) +#define PNX8550_GIC_MOD_ID *(volatile unsigned long *)(PNX8550_GIC_BASE + 0xFFC) + +// cp0 is two software + six hw exceptions +#define PNX8550_INT_CP0_TOTINT 8 +#define PNX8550_INT_CP0_MIN 0 +#define PNX8550_INT_CP0_MAX (PNX8550_INT_CP0_MIN + PNX8550_INT_CP0_TOTINT - 1) + +#define MIPS_CPU_GIC_IRQ 2 +#define MIPS_CPU_TIMER_IRQ 7 + +// GIC are 71 exceptions connected to cp0's first hardware exception +#define PNX8550_INT_GIC_TOTINT 71 +#define PNX8550_INT_GIC_MIN (PNX8550_INT_CP0_MAX+1) +#define PNX8550_INT_GIC_MAX (PNX8550_INT_GIC_MIN + PNX8550_INT_GIC_TOTINT - 1) + +#define PNX8550_INT_UNDEF (PNX8550_INT_GIC_MIN+0) +#define PNX8550_INT_IPC_TARGET0_MIPS (PNX8550_INT_GIC_MIN+1) +#define PNX8550_INT_IPC_TARGET1_TM32_1 (PNX8550_INT_GIC_MIN+2) +#define PNX8550_INT_IPC_TARGET1_TM32_2 (PNX8550_INT_GIC_MIN+3) +#define PNX8550_INT_RESERVED_4 (PNX8550_INT_GIC_MIN+4) +#define PNX8550_INT_USB (PNX8550_INT_GIC_MIN+5) +#define PNX8550_INT_GPIO_EQ1 (PNX8550_INT_GIC_MIN+6) +#define PNX8550_INT_GPIO_EQ2 (PNX8550_INT_GIC_MIN+7) +#define PNX8550_INT_GPIO_EQ3 (PNX8550_INT_GIC_MIN+8) +#define PNX8550_INT_GPIO_EQ4 (PNX8550_INT_GIC_MIN+9) + +#define PNX8550_INT_GPIO_EQ5 (PNX8550_INT_GIC_MIN+10) +#define PNX8550_INT_GPIO_EQ6 (PNX8550_INT_GIC_MIN+11) +#define PNX8550_INT_RESERVED_12 (PNX8550_INT_GIC_MIN+12) +#define PNX8550_INT_QVCP1 (PNX8550_INT_GIC_MIN+13) +#define PNX8550_INT_QVCP2 (PNX8550_INT_GIC_MIN+14) +#define PNX8550_INT_I2C1 (PNX8550_INT_GIC_MIN+15) +#define PNX8550_INT_I2C2 (PNX8550_INT_GIC_MIN+16) +#define PNX8550_INT_ISO_UART1 (PNX8550_INT_GIC_MIN+17) +#define PNX8550_INT_ISO_UART2 (PNX8550_INT_GIC_MIN+18) +#define PNX8550_INT_UART1 (PNX8550_INT_GIC_MIN+19) + +#define PNX8550_INT_UART2 (PNX8550_INT_GIC_MIN+20) +#define PNX8550_INT_QNTR (PNX8550_INT_GIC_MIN+21) +#define PNX8550_INT_RESERVED22 (PNX8550_INT_GIC_MIN+22) +#define PNX8550_INT_T_DSC (PNX8550_INT_GIC_MIN+23) +#define PNX8550_INT_M_DSC (PNX8550_INT_GIC_MIN+24) +#define PNX8550_INT_RESERVED25 (PNX8550_INT_GIC_MIN+25) +#define PNX8550_INT_2D_DRAW_ENG (PNX8550_INT_GIC_MIN+26) +#define PNX8550_INT_MEM_BASED_SCALAR1 (PNX8550_INT_GIC_MIN+27) +#define PNX8550_INT_VIDEO_MPEG (PNX8550_INT_GIC_MIN+28) +#define PNX8550_INT_VIDEO_INPUT_P1 (PNX8550_INT_GIC_MIN+29) + +#define PNX8550_INT_VIDEO_INPUT_P2 (PNX8550_INT_GIC_MIN+30) +#define PNX8550_INT_SPDI1 (PNX8550_INT_GIC_MIN+31) +#define PNX8550_INT_SPDO (PNX8550_INT_GIC_MIN+32) +#define PNX8550_INT_AUDIO_INPUT1 (PNX8550_INT_GIC_MIN+33) +#define PNX8550_INT_AUDIO_OUTPUT1 (PNX8550_INT_GIC_MIN+34) +#define PNX8550_INT_AUDIO_INPUT2 (PNX8550_INT_GIC_MIN+35) +#define PNX8550_INT_AUDIO_OUTPUT2 (PNX8550_INT_GIC_MIN+36) +#define PNX8550_INT_MEMBASED_SCALAR2 (PNX8550_INT_GIC_MIN+37) +#define PNX8550_INT_VPK (PNX8550_INT_GIC_MIN+38) +#define PNX8550_INT_MPEG1_MIPS (PNX8550_INT_GIC_MIN+39) + +#define PNX8550_INT_MPEG1_TM (PNX8550_INT_GIC_MIN+40) +#define PNX8550_INT_MPEG2_MIPS (PNX8550_INT_GIC_MIN+41) +#define PNX8550_INT_MPEG2_TM (PNX8550_INT_GIC_MIN+42) +#define PNX8550_INT_TS_DMA (PNX8550_INT_GIC_MIN+43) +#define PNX8550_INT_EDMA (PNX8550_INT_GIC_MIN+44) +#define PNX8550_INT_TM_DEBUG1 (PNX8550_INT_GIC_MIN+45) +#define PNX8550_INT_TM_DEBUG2 (PNX8550_INT_GIC_MIN+46) +#define PNX8550_INT_PCI_INTA (PNX8550_INT_GIC_MIN+47) +#define PNX8550_INT_CLOCK_MODULE (PNX8550_INT_GIC_MIN+48) +#define PNX8550_INT_PCI_XIO_INTA_PCI (PNX8550_INT_GIC_MIN+49) + +#define PNX8550_INT_PCI_XIO_INTB_DMA (PNX8550_INT_GIC_MIN+50) +#define PNX8550_INT_PCI_XIO_INTC_GPPM (PNX8550_INT_GIC_MIN+51) +#define PNX8550_INT_PCI_XIO_INTD_GPXIO (PNX8550_INT_GIC_MIN+52) +#define PNX8550_INT_DVD_CSS (PNX8550_INT_GIC_MIN+53) +#define PNX8550_INT_VLD (PNX8550_INT_GIC_MIN+54) +#define PNX8550_INT_GPIO_TSU_7_0 (PNX8550_INT_GIC_MIN+55) +#define PNX8550_INT_GPIO_TSU_15_8 (PNX8550_INT_GIC_MIN+56) +#define PNX8550_INT_GPIO_CTU_IR (PNX8550_INT_GIC_MIN+57) +#define PNX8550_INT_GPIO0 (PNX8550_INT_GIC_MIN+58) +#define PNX8550_INT_GPIO1 (PNX8550_INT_GIC_MIN+59) + +#define PNX8550_INT_GPIO2 (PNX8550_INT_GIC_MIN+60) +#define PNX8550_INT_GPIO3 (PNX8550_INT_GIC_MIN+61) +#define PNX8550_INT_GPIO4 (PNX8550_INT_GIC_MIN+62) +#define PNX8550_INT_GPIO5 (PNX8550_INT_GIC_MIN+63) +#define PNX8550_INT_GPIO6 (PNX8550_INT_GIC_MIN+64) +#define PNX8550_INT_GPIO7 (PNX8550_INT_GIC_MIN+65) +#define PNX8550_INT_PMAN_SECURITY (PNX8550_INT_GIC_MIN+66) +#define PNX8550_INT_I2C3 (PNX8550_INT_GIC_MIN+67) +#define PNX8550_INT_RESERVED_68 (PNX8550_INT_GIC_MIN+68) +#define PNX8550_INT_SPDI2 (PNX8550_INT_GIC_MIN+69) + +#define PNX8550_INT_I2C4 (PNX8550_INT_GIC_MIN+70) + +// Timer are 3 exceptions connected to cp0's 7th hardware exception +#define PNX8550_INT_TIMER_TOTINT 3 +#define PNX8550_INT_TIMER_MIN (PNX8550_INT_GIC_MAX+1) +#define PNX8550_INT_TIMER_MAX (PNX8550_INT_TIMER_MIN + PNX8550_INT_TIMER_TOTINT - 1) + +#define PNX8550_INT_TIMER1 (PNX8550_INT_TIMER_MIN+0) +#define PNX8550_INT_TIMER2 (PNX8550_INT_TIMER_MIN+1) +#define PNX8550_INT_TIMER3 (PNX8550_INT_TIMER_MIN+2) +#define PNX8550_INT_WATCHDOG PNX8550_INT_TIMER3 + +#endif diff --git a/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h b/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h new file mode 100644 index 000000000000..bdde00c9199b --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h @@ -0,0 +1,262 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Embedded Alley Solutions, Inc + */ +#ifndef __ASM_MACH_KERNEL_ENTRY_INIT_H +#define __ASM_MACH_KERNEL_ENTRY_INIT_H + +#include <asm/cacheops.h> +#include <asm/addrspace.h> + +#define CO_CONFIGPR_VALID 0x3F1F41FF /* valid bits to write to ConfigPR */ +#define HAZARD_CP0 nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; +#define CACHE_OPC 0xBC000000 /* MIPS cache instruction opcode */ +#define ICACHE_LINE_SIZE 32 /* Instruction cache line size bytes */ +#define DCACHE_LINE_SIZE 32 /* Data cache line size in bytes */ + +#define ICACHE_SET_COUNT 256 /* Instruction cache set count */ +#define DCACHE_SET_COUNT 128 /* Data cache set count */ + +#define ICACHE_SET_SIZE (ICACHE_SET_COUNT * ICACHE_LINE_SIZE) +#define DCACHE_SET_SIZE (DCACHE_SET_COUNT * DCACHE_LINE_SIZE) + + .macro kernel_entry_setup + .set push + .set noreorder + /* + * PNX8550 entry point, when running a non compressed + * kernel. When loading a zImage, the head.S code in + * arch/mips/zboot/pnx8550 will init the caches and, + * decompress the kernel, and branch to kernel_entry. + */ +cache_begin: li t0, (1<<28) + mtc0 t0, CP0_STATUS /* cp0 usable */ + HAZARD_CP0 + + mtc0 zero, CP0_CAUSE + HAZARD_CP0 + + + /* Set static virtual to phys address translation and TLB disabled */ + mfc0 t0, CP0_CONFIG, 7 + HAZARD_CP0 + + and t0, ~((1<<19) | (1<<20)) /* TLB/MAP cleared */ + mtc0 t0, CP0_CONFIG, 7 + HAZARD_CP0 + + /* CPU boots with kseg0 cache algo set to 0x2 -- uncached */ + + init_icache + nop + init_dcache + nop + + cachePr4450ICReset + nop + + cachePr4450DCReset + nop + + /* read ConfigPR into t0 */ + mfc0 t0, CP0_CONFIG, 7 + HAZARD_CP0 + + /* enable the TLB */ + or t0, (1<<19) + + /* disable the ICACHE: at least 10x slower */ + /* or t0, (1<<26) */ + + /* disable the DCACHE; CONFIG_CPU_HAS_LLSC should not be set */ + /* or t0, (1<<27) */ + + and t0, CO_CONFIGPR_VALID + + /* enable TLB. */ + mtc0 t0, CP0_CONFIG, 7 + HAZARD_CP0 +cache_end: + /* Setup CMEM_0 to MMIO address space, 2MB */ + lui t0, 0x1BE0 + addi t0, t0, 0x3 + mtc0 $8, $22, 4 + nop + + /* Setup CMEM_1, 128MB */ + lui t0, 0x1000 + addi t0, t0, 0xf + mtc0 $8, $22, 5 + nop + + + /* Setup CMEM_2, 32MB */ + lui t0, 0x1C00 + addi t0, t0, 0xb + mtc0 $8, $22, 6 + nop + + /* Setup CMEM_3, 0MB */ + lui t0, 0x0 + addi t0, t0, 0x0 + mtc0 $8, $22, 7 + nop + + /* Enable cache */ + mfc0 t0, CP0_CONFIG + HAZARD_CP0 + and t0, t0, 0xFFFFFFF8 + or t0, t0, 3 + mtc0 t0, CP0_CONFIG + HAZARD_CP0 + .set pop + .endm + + .macro init_icache + .set push + .set noreorder + + /* Get Cache Configuration */ + mfc0 t3, CP0_CONFIG, 1 + HAZARD_CP0 + + /* get cache Line size */ + + srl t1, t3, 19 /* C0_CONFIGPR_IL_SHIFT */ + andi t1, t1, 0x7 /* C0_CONFIGPR_IL_MASK */ + beq t1, zero, pr4450_instr_cache_invalidated /* if zero instruction cache is absent */ + nop + addiu t0, t1, 1 + ori t1, zero, 1 + sllv t1, t1, t0 + + /* get max cache Index */ + srl t2, t3, 22 /* C0_CONFIGPR_IS_SHIFT */ + andi t2, t2, 0x7 /* C0_CONFIGPR_IS_MASK */ + addiu t0, t2, 6 + ori t2, zero, 1 + sllv t2, t2, t0 + + /* get max cache way */ + srl t3, t3, 16 /* C0_CONFIGPR_IA_SHIFT */ + andi t3, t3, 0x7 /* C0_CONFIGPR_IA_MASK */ + addiu t3, t3, 1 + + /* total no of cache lines */ + multu t2, t3 /* max index * max way */ + mflo t2 + addiu t2, t2, -1 + + move t0, zero +pr4450_next_instruction_cache_set: + cache Index_Invalidate_I, 0(t0) + addu t0, t0, t1 /* add bytes in a line */ + bne t2, zero, pr4450_next_instruction_cache_set + addiu t2, t2, -1 /* reduce no of lines to invalidate by one */ +pr4450_instr_cache_invalidated: + .set pop + .endm + + .macro init_dcache + .set push + .set noreorder + move t1, zero + + /* Store Tag Information */ + mtc0 zero, CP0_TAGLO, 0 + HAZARD_CP0 + + mtc0 zero, CP0_TAGHI, 0 + HAZARD_CP0 + + /* Cache size is 16384 = 512 lines x 32 bytes per line */ + or t2, zero, (128*4)-1 /* 512 lines */ + /* Invalidate all lines */ +2: + cache Index_Store_Tag_D, 0(t1) + addiu t2, t2, -1 + bne t2, zero, 2b + addiu t1, t1, 32 /* 32 bytes in a line */ + .set pop + .endm + + .macro cachePr4450ICReset + .set push + .set noreorder + + /* Save CP0 status reg on entry; */ + /* disable interrupts during cache reset */ + mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */ + HAZARD_CP0 + + mtc0 zero, CP0_STATUS /* disable CPU interrupts */ + HAZARD_CP0 + + or t1, zero, zero /* T1 = starting cache index (0) */ + ori t2, zero, (256 - 1) /* T2 = inst cache set cnt - 1 */ + + icache_invd_loop: + /* 9 == register t1 */ + .word CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \ + (0 * ICACHE_SET_SIZE) /* invalidate inst cache WAY0 */ + .word CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \ + (1 * ICACHE_SET_SIZE) /* invalidate inst cache WAY1 */ + + addiu t1, t1, ICACHE_LINE_SIZE /* T1 = next cache line index */ + bne t2, zero, icache_invd_loop /* T2 = 0 if all sets invalidated */ + addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */ + + /* Initialize the latches in the instruction cache tag */ + /* that drive the way selection tri-state bus drivers, by doing a */ + /* dummy load while the instruction cache is still disabled. */ + /* TODO: Is this needed ? */ + la t1, KSEG0 /* T1 = cached memory base address */ + lw zero, 0x0000(t1) /* (dummy read of first memory word) */ + + mtc0 t0, CP0_STATUS /* restore interrupt status on entry */ + HAZARD_CP0 + .set pop + .endm + + .macro cachePr4450DCReset + .set push + .set noreorder + mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */ + HAZARD_CP0 + mtc0 zero, CP0_STATUS /* disable CPU interrupts */ + HAZARD_CP0 + + /* Writeback/invalidate entire data cache sets/ways/lines */ + or t1, zero, zero /* T1 = starting cache index (0) */ + ori t2, zero, (DCACHE_SET_COUNT - 1) /* T2 = data cache set cnt - 1 */ + + dcache_wbinvd_loop: + /* 9 == register t1 */ + .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ + (0 * DCACHE_SET_SIZE) /* writeback/invalidate WAY0 */ + .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ + (1 * DCACHE_SET_SIZE) /* writeback/invalidate WAY1 */ + .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ + (2 * DCACHE_SET_SIZE) /* writeback/invalidate WAY2 */ + .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ + (3 * DCACHE_SET_SIZE) /* writeback/invalidate WAY3 */ + + addiu t1, t1, DCACHE_LINE_SIZE /* T1 = next data cache line index */ + bne t2, zero, dcache_wbinvd_loop /* T2 = 0 when wbinvd entire cache */ + addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */ + + /* Initialize the latches in the data cache tag that drive the way + selection tri-state bus drivers, by doing a dummy load while the + data cache is still in the disabled mode. TODO: Is this needed ? */ + la t1, KSEG0 /* T1 = cached memory base address */ + lw zero, 0x0000(t1) /* (dummy read of first memory word) */ + + mtc0 t0, CP0_STATUS /* restore interrupt status on entry */ + HAZARD_CP0 + .set pop + .endm + +#endif /* __ASM_MACH_KERNEL_ENTRY_INIT_H */ diff --git a/arch/mips/include/asm/mach-pnx8550/nand.h b/arch/mips/include/asm/mach-pnx8550/nand.h new file mode 100644 index 000000000000..aefbc514ab09 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/nand.h @@ -0,0 +1,121 @@ +#ifndef __PNX8550_NAND_H +#define __PNX8550_NAND_H + +#define PNX8550_NAND_BASE_ADDR 0x10000000 +#define PNX8550_PCIXIO_BASE 0xBBE40000 + +#define PNX8550_DMA_EXT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x800) +#define PNX8550_DMA_INT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x804) +#define PNX8550_DMA_TRANS_SIZE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x808) +#define PNX8550_DMA_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x80c) +#define PNX8550_XIO_SEL0 *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x814) +#define PNX8550_GPXIO_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x820) +#define PNX8550_GPXIO_WR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x824) +#define PNX8550_GPXIO_RD *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x828) +#define PNX8550_GPXIO_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x82C) +#define PNX8550_XIO_FLASH_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x830) +#define PNX8550_GPXIO_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb0) +#define PNX8550_GPXIO_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb4) +#define PNX8550_GPXIO_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb8) +#define PNX8550_DMA_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd0) +#define PNX8550_DMA_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd4) +#define PNX8550_DMA_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd8) + +#define PNX8550_XIO_SEL0_EN_16BIT 0x00800000 +#define PNX8550_XIO_SEL0_USE_ACK 0x00400000 +#define PNX8550_XIO_SEL0_REN_HIGH 0x00100000 +#define PNX8550_XIO_SEL0_REN_LOW 0x00040000 +#define PNX8550_XIO_SEL0_WEN_HIGH 0x00010000 +#define PNX8550_XIO_SEL0_WEN_LOW 0x00004000 +#define PNX8550_XIO_SEL0_WAIT 0x00000200 +#define PNX8550_XIO_SEL0_OFFSET 0x00000020 +#define PNX8550_XIO_SEL0_TYPE_68360 0x00000000 +#define PNX8550_XIO_SEL0_TYPE_NOR 0x00000008 +#define PNX8550_XIO_SEL0_TYPE_NAND 0x00000010 +#define PNX8550_XIO_SEL0_TYPE_IDE 0x00000018 +#define PNX8550_XIO_SEL0_SIZE_8MB 0x00000000 +#define PNX8550_XIO_SEL0_SIZE_16MB 0x00000002 +#define PNX8550_XIO_SEL0_SIZE_32MB 0x00000004 +#define PNX8550_XIO_SEL0_SIZE_64MB 0x00000006 +#define PNX8550_XIO_SEL0_ENAB 0x00000001 + +#define PNX8550_SEL0_DEFAULT ((PNX8550_XIO_SEL0_EN_16BIT) | \ + (PNX8550_XIO_SEL0_REN_HIGH*0)| \ + (PNX8550_XIO_SEL0_REN_LOW*2) | \ + (PNX8550_XIO_SEL0_WEN_HIGH*0)| \ + (PNX8550_XIO_SEL0_WEN_LOW*2) | \ + (PNX8550_XIO_SEL0_WAIT*4) | \ + (PNX8550_XIO_SEL0_OFFSET*0) | \ + (PNX8550_XIO_SEL0_TYPE_NAND) | \ + (PNX8550_XIO_SEL0_SIZE_32MB) | \ + (PNX8550_XIO_SEL0_ENAB)) + +#define PNX8550_GPXIO_PENDING 0x00000200 +#define PNX8550_GPXIO_DONE 0x00000100 +#define PNX8550_GPXIO_CLR_DONE 0x00000080 +#define PNX8550_GPXIO_INIT 0x00000040 +#define PNX8550_GPXIO_READ_CMD 0x00000010 +#define PNX8550_GPXIO_BEN 0x0000000F + +#define PNX8550_XIO_FLASH_64MB 0x00200000 +#define PNX8550_XIO_FLASH_INC_DATA 0x00100000 +#define PNX8550_XIO_FLASH_CMD_PH 0x000C0000 +#define PNX8550_XIO_FLASH_CMD_PH2 0x00080000 +#define PNX8550_XIO_FLASH_CMD_PH1 0x00040000 +#define PNX8550_XIO_FLASH_CMD_PH0 0x00000000 +#define PNX8550_XIO_FLASH_ADR_PH 0x00030000 +#define PNX8550_XIO_FLASH_ADR_PH3 0x00030000 +#define PNX8550_XIO_FLASH_ADR_PH2 0x00020000 +#define PNX8550_XIO_FLASH_ADR_PH1 0x00010000 +#define PNX8550_XIO_FLASH_ADR_PH0 0x00000000 +#define PNX8550_XIO_FLASH_CMD_B(x) ((x<<8) & 0x0000FF00) +#define PNX8550_XIO_FLASH_CMD_A(x) (x & 0x000000FF) + +#define PNX8550_XIO_INT_ACK 0x00004000 +#define PNX8550_XIO_INT_COMPL 0x00002000 +#define PNX8550_XIO_INT_NONSUP 0x00000200 +#define PNX8550_XIO_INT_ABORT 0x00000004 + +#define PNX8550_DMA_CTRL_SINGLE_DATA 0x00000400 +#define PNX8550_DMA_CTRL_SND2XIO 0x00000200 +#define PNX8550_DMA_CTRL_FIX_ADDR 0x00000100 +#define PNX8550_DMA_CTRL_BURST_8 0x00000000 +#define PNX8550_DMA_CTRL_BURST_16 0x00000020 +#define PNX8550_DMA_CTRL_BURST_32 0x00000040 +#define PNX8550_DMA_CTRL_BURST_64 0x00000060 +#define PNX8550_DMA_CTRL_BURST_128 0x00000080 +#define PNX8550_DMA_CTRL_BURST_256 0x000000A0 +#define PNX8550_DMA_CTRL_BURST_512 0x000000C0 +#define PNX8550_DMA_CTRL_BURST_NORES 0x000000E0 +#define PNX8550_DMA_CTRL_INIT_DMA 0x00000010 +#define PNX8550_DMA_CTRL_CMD_TYPE 0x0000000F + +/* see PCI system arch, page 100 for the full list: */ +#define PNX8550_DMA_CTRL_PCI_CMD_READ 0x00000006 +#define PNX8550_DMA_CTRL_PCI_CMD_WRITE 0x00000007 + +#define PNX8550_DMA_INT_STAT_ACK_DONE (1<<14) +#define PNX8550_DMA_INT_STAT_DMA_DONE (1<<12) +#define PNX8550_DMA_INT_STAT_DMA_ERR (1<<9) +#define PNX8550_DMA_INT_STAT_PERR5 (1<<5) +#define PNX8550_DMA_INT_STAT_PERR4 (1<<4) +#define PNX8550_DMA_INT_STAT_M_ABORT (1<<2) +#define PNX8550_DMA_INT_STAT_T_ABORT (1<<1) + +#define PNX8550_DMA_INT_EN_ACK_DONE (1<<14) +#define PNX8550_DMA_INT_EN_DMA_DONE (1<<12) +#define PNX8550_DMA_INT_EN_DMA_ERR (1<<9) +#define PNX8550_DMA_INT_EN_PERR5 (1<<5) +#define PNX8550_DMA_INT_EN_PERR4 (1<<4) +#define PNX8550_DMA_INT_EN_M_ABORT (1<<2) +#define PNX8550_DMA_INT_EN_T_ABORT (1<<1) + +#define PNX8550_DMA_INT_CLR_ACK_DONE (1<<14) +#define PNX8550_DMA_INT_CLR_DMA_DONE (1<<12) +#define PNX8550_DMA_INT_CLR_DMA_ERR (1<<9) +#define PNX8550_DMA_INT_CLR_PERR5 (1<<5) +#define PNX8550_DMA_INT_CLR_PERR4 (1<<4) +#define PNX8550_DMA_INT_CLR_M_ABORT (1<<2) +#define PNX8550_DMA_INT_CLR_T_ABORT (1<<1) + +#endif diff --git a/arch/mips/include/asm/mach-pnx8550/pci.h b/arch/mips/include/asm/mach-pnx8550/pci.h new file mode 100644 index 000000000000..b921508d701b --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/pci.h @@ -0,0 +1,185 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PCI specific definitions + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef __PNX8550_PCI_H +#define __PNX8550_PCI_H + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +#define PCI_CMD_IOR 0x20 +#define PCI_CMD_IOW 0x30 +#define PCI_CMD_CONFIG_READ 0xa0 +#define PCI_CMD_CONFIG_WRITE 0xb0 + +#define PCI_IO_TIMEOUT 1000 +#define PCI_IO_RETRY 5 +/* Timeout for IO and CFG accesses. + This is in 1/1024 th of a jiffie(=10ms) + i.e. approx 10us */ +#define PCI_IO_JIFFIES_TIMEOUT 40 +#define PCI_IO_JIFFIES_SHIFT 10 + +#define PCI_BYTE_ENABLE_MASK 0x0000000f +#define PCI_CFG_BUS_SHIFT 16 +#define PCI_CFG_FUNC_SHIFT 8 +#define PCI_CFG_REG_SHIFT 2 + +#define PCI_BASE 0x1be00000 +#define PCI_SETUP 0x00040010 +#define PCI_DIS_REQGNT (1<<30) +#define PCI_DIS_REQGNTA (1<<29) +#define PCI_DIS_REQGNTB (1<<28) +#define PCI_D2_SUPPORT (1<<27) +#define PCI_D1_SUPPORT (1<<26) +#define PCI_EN_TA (1<<24) +#define PCI_EN_PCI2MMI (1<<23) +#define PCI_EN_XIO (1<<22) +#define PCI_BASE18_PREF (1<<21) +#define SIZE_16M 0x3 +#define SIZE_32M 0x4 +#define SIZE_64M 0x5 +#define SIZE_128M 0x6 +#define PCI_SETUP_BASE18_SIZE(X) (X<<18) +#define PCI_SETUP_BASE18_EN (1<<17) +#define PCI_SETUP_BASE14_PREF (1<<16) +#define PCI_SETUP_BASE14_SIZE(X) (X<<12) +#define PCI_SETUP_BASE14_EN (1<<11) +#define PCI_SETUP_BASE10_PREF (1<<10) +#define PCI_SETUP_BASE10_SIZE(X) (X<<7) +#define PCI_SETUP_CFGMANAGE_EN (1<<1) +#define PCI_SETUP_PCIARB_EN (1<<0) + +#define PCI_CTRL 0x040014 +#define PCI_SWPB_DCS_PCI (1<<16) +#define PCI_SWPB_PCI_PCI (1<<15) +#define PCI_SWPB_PCI_DCS (1<<14) +#define PCI_REG_WR_POST (1<<13) +#define PCI_XIO_WR_POST (1<<12) +#define PCI_PCI2_WR_POST (1<<13) +#define PCI_PCI1_WR_POST (1<<12) +#define PCI_SERR_SEEN (1<<11) +#define PCI_B10_SPEC_RD (1<<6) +#define PCI_B14_SPEC_RD (1<<5) +#define PCI_B18_SPEC_RD (1<<4) +#define PCI_B10_NOSUBWORD (1<<3) +#define PCI_B14_NOSUBWORD (1<<2) +#define PCI_B18_NOSUBWORD (1<<1) +#define PCI_RETRY_TMREN (1<<0) + +#define PCI_BASE1_LO 0x040018 +#define PCI_BASE1_HI 0x04001C +#define PCI_BASE2_LO 0x040020 +#define PCI_BASE2_HI 0x040024 +#define PCI_RDLIFETIM 0x040028 +#define PCI_GPPM_ADDR 0x04002C +#define PCI_GPPM_WDAT 0x040030 +#define PCI_GPPM_RDAT 0x040034 +#define PCI_GPPM_CTRL 0x040038 +#define GPPM_DONE (1<<10) +#define INIT_PCI_CYCLE (1<<9) +#define GPPM_CMD(X) (((X)&0xf)<<4) +#define GPPM_BYTEEN(X) ((X)&0xf) +#define PCI_UNLOCKREG 0x04003C +#define UNLOCK_SSID(X) (((X)&0xff)<<8) +#define UNLOCK_SETUP(X) (((X)&0xff)<<0) +#define UNLOCK_MAGIC 0xCA +#define PCI_DEV_VEND_ID 0x040040 +#define DEVICE_ID(X) (((X)>>16)&0xffff) +#define VENDOR_ID(X) (((X)&0xffff)) +#define PCI_CFG_CMDSTAT 0x040044 +#define PCI_CFG_STATUS(X) (((X)>>16)&0xffff) +#define PCI_CFG_COMMAND(X) ((X)&0xffff) +#define PCI_CLASS_REV 0x040048 +#define PCI_CLASSCODE(X) (((X)>>8)&0xffffff) +#define PCI_REVID(X) ((X)&0xff) +#define PCI_LAT_TMR 0x04004c +#define PCI_BASE10 0x040050 +#define PCI_BASE14 0x040054 +#define PCI_BASE18 0x040058 +#define PCI_SUBSYS_ID 0x04006c +#define PCI_CAP_PTR 0x040074 +#define PCI_CFG_MISC 0x04007c +#define PCI_PMC 0x040080 +#define PCI_PWR_STATE 0x040084 +#define PCI_IO 0x040088 +#define PCI_SLVTUNING 0x04008C +#define PCI_DMATUNING 0x040090 +#define PCI_DMAEADDR 0x040800 +#define PCI_DMAIADDR 0x040804 +#define PCI_DMALEN 0x040808 +#define PCI_DMACTRL 0x04080C +#define PCI_XIOCTRL 0x040810 +#define PCI_SEL0PROF 0x040814 +#define PCI_SEL1PROF 0x040818 +#define PCI_SEL2PROF 0x04081C +#define PCI_GPXIOADDR 0x040820 +#define PCI_NANDCTRLS 0x400830 +#define PCI_SEL3PROF 0x040834 +#define PCI_SEL4PROF 0x040838 +#define PCI_GPXIO_STAT 0x040FB0 +#define PCI_GPXIO_IMASK 0x040FB4 +#define PCI_GPXIO_ICLR 0x040FB8 +#define PCI_GPXIO_ISET 0x040FBC +#define PCI_GPPM_STATUS 0x040FC0 +#define GPPM_DONE (1<<10) +#define GPPM_ERR (1<<9) +#define GPPM_MPAR_ERR (1<<8) +#define GPPM_PAR_ERR (1<<7) +#define GPPM_R_MABORT (1<<2) +#define GPPM_R_TABORT (1<<1) +#define PCI_GPPM_IMASK 0x040FC4 +#define PCI_GPPM_ICLR 0x040FC8 +#define PCI_GPPM_ISET 0x040FCC +#define PCI_DMA_STATUS 0x040FD0 +#define PCI_DMA_IMASK 0x040FD4 +#define PCI_DMA_ICLR 0x040FD8 +#define PCI_DMA_ISET 0x040FDC +#define PCI_ISTATUS 0x040FE0 +#define PCI_IMASK 0x040FE4 +#define PCI_ICLR 0x040FE8 +#define PCI_ISET 0x040FEC +#define PCI_MOD_ID 0x040FFC + +/* + * PCI configuration cycle AD bus definition + */ +/* Type 0 */ +#define PCI_CFG_TYPE0_REG_SHF 0 +#define PCI_CFG_TYPE0_FUNC_SHF 8 + +/* Type 1 */ +#define PCI_CFG_TYPE1_REG_SHF 0 +#define PCI_CFG_TYPE1_FUNC_SHF 8 +#define PCI_CFG_TYPE1_DEV_SHF 11 +#define PCI_CFG_TYPE1_BUS_SHF 16 + +/* + * Ethernet device DP83816 definition + */ +#define DP83816_IRQ_ETHER 66 + +#endif diff --git a/arch/mips/include/asm/mach-pnx8550/uart.h b/arch/mips/include/asm/mach-pnx8550/uart.h new file mode 100644 index 000000000000..ad7608d44874 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/uart.h @@ -0,0 +1,30 @@ +#ifndef __IP3106_UART_H +#define __IP3106_UART_H + +#include <int.h> + +/* early macros for kgdb use. fixme: clean this up */ + +#define UART_BASE 0xbbe4a000 /* PNX8550 */ + +#define PNX8550_UART_PORT0 (UART_BASE) +#define PNX8550_UART_PORT1 (UART_BASE + 0x1000) + +#define PNX8550_UART_INT(x) (PNX8550_INT_GIC_MIN+19+x) +#define IRQ_TO_UART(x) (x-PNX8550_INT_GIC_MIN-19) + +/* early macros needed for prom/kgdb */ + +#define ip3106_lcr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x000) +#define ip3106_mcr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x004) +#define ip3106_baud(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x008) +#define ip3106_cfg(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x00C) +#define ip3106_fifo(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x028) +#define ip3106_istat(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE0) +#define ip3106_ien(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE4) +#define ip3106_iclr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE8) +#define ip3106_iset(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFEC) +#define ip3106_pd(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFF4) +#define ip3106_mid(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFFC) + +#endif diff --git a/arch/mips/include/asm/mach-pnx8550/usb.h b/arch/mips/include/asm/mach-pnx8550/usb.h new file mode 100644 index 000000000000..483b7fc65d41 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/usb.h @@ -0,0 +1,32 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * USB specific definitions + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef __PNX8550_USB_H +#define __PNX8550_USB_H + +/* + * USB Host controller + */ + +#define PNX8550_USB_OHCI_OP_BASE 0x1be48000 +#define PNX8550_USB_OHCI_OP_LEN 0x1000 + +#endif diff --git a/arch/mips/include/asm/mach-pnx8550/war.h b/arch/mips/include/asm/mach-pnx8550/war.h new file mode 100644 index 000000000000..d0458dd082f9 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_PNX8550_WAR_H +#define __ASM_MIPS_MACH_PNX8550_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */ diff --git a/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h new file mode 100644 index 000000000000..f3bc7efa2608 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h @@ -0,0 +1,81 @@ +/* + * IDT RC32434 specific CPU feature overrides + * + * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ +#ifndef __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H + +/* + * The IDT RC32434 SOC has a built-in MIPS 4Kc core. + */ +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 1 +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +#define cpu_has_vtag_icache 0 +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +/* #define cpu_has_pindexed_dcache ? */ + +/* #define cpu_icache_snoops_remote_store ? */ + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 + +/* #define cpu_has_nofpuex ? */ +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +#define cpu_has_inclusive_pcaches 0 + +#define cpu_dcache_line_size() 16 +#define cpu_icache_line_size() 16 + +#endif /* __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-rc32434/ddr.h b/arch/mips/include/asm/mach-rc32434/ddr.h new file mode 100644 index 000000000000..291e2cf9dde0 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/ddr.h @@ -0,0 +1,141 @@ +/* + * Definitions for the DDR registers + * + * Copyright 2002 Ryan Holm <ryan.holmQVist@idt.com> + * Copyright 2008 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _ASM_RC32434_DDR_H_ +#define _ASM_RC32434_DDR_H_ + +#include <asm/mach-rc32434/rb.h> + +/* DDR register structure */ +struct ddr_ram { + u32 ddrbase; + u32 ddrmask; + u32 res1; + u32 res2; + u32 ddrc; + u32 ddrabase; + u32 ddramask; + u32 ddramap; + u32 ddrcust; + u32 ddrrdc; + u32 ddrspare; +}; + +#define DDR0_PHYS_ADDR 0x18018000 + +/* DDR banks masks */ +#define DDR_MASK 0xffff0000 +#define DDR0_BASE_MSK DDR_MASK +#define DDR1_BASE_MSK DDR_MASK + +/* DDR bank0 registers */ +#define RC32434_DDR0_ATA_BIT 5 +#define RC32434_DDR0_ATA_MSK 0x000000E0 +#define RC32434_DDR0_DBW_BIT 8 +#define RC32434_DDR0_DBW_MSK 0x00000100 +#define RC32434_DDR0_WR_BIT 9 +#define RC32434_DDR0_WR_MSK 0x00000600 +#define RC32434_DDR0_PS_BIT 11 +#define RC32434_DDR0_PS_MSK 0x00001800 +#define RC32434_DDR0_DTYPE_BIT 13 +#define RC32434_DDR0_DTYPE_MSK 0x0000e000 +#define RC32434_DDR0_RFC_BIT 16 +#define RC32434_DDR0_RFC_MSK 0x000f0000 +#define RC32434_DDR0_RP_BIT 20 +#define RC32434_DDR0_RP_MSK 0x00300000 +#define RC32434_DDR0_AP_BIT 22 +#define RC32434_DDR0_AP_MSK 0x00400000 +#define RC32434_DDR0_RCD_BIT 23 +#define RC32434_DDR0_RCD_MSK 0x01800000 +#define RC32434_DDR0_CL_BIT 25 +#define RC32434_DDR0_CL_MSK 0x06000000 +#define RC32434_DDR0_DBM_BIT 27 +#define RC32434_DDR0_DBM_MSK 0x08000000 +#define RC32434_DDR0_SDS_BIT 28 +#define RC32434_DDR0_SDS_MSK 0x10000000 +#define RC32434_DDR0_ATP_BIT 29 +#define RC32434_DDR0_ATP_MSK 0x60000000 +#define RC32434_DDR0_RE_BIT 31 +#define RC32434_DDR0_RE_MSK 0x80000000 + +/* DDR bank C registers */ +#define RC32434_DDRC_MSK(x) BIT_TO_MASK(x) +#define RC32434_DDRC_CES_BIT 0 +#define RC32434_DDRC_ACE_BIT 1 + +/* Custom DDR bank registers */ +#define RC32434_DCST_MSK(x) BIT_TO_MASK(x) +#define RC32434_DCST_CS_BIT 0 +#define RC32434_DCST_CS_MSK 0x00000003 +#define RC32434_DCST_WE_BIT 2 +#define RC32434_DCST_RAS_BIT 3 +#define RC32434_DCST_CAS_BIT 4 +#define RC32434_DSCT_CKE_BIT 5 +#define RC32434_DSCT_BA_BIT 6 +#define RC32434_DSCT_BA_MSK 0x000000c0 + +/* DDR QSC registers */ +#define RC32434_QSC_DM_BIT 0 +#define RC32434_QSC_DM_MSK 0x00000003 +#define RC32434_QSC_DQSBS_BIT 2 +#define RC32434_QSC_DQSBS_MSK 0x000000fc +#define RC32434_QSC_DB_BIT 8 +#define RC32434_QSC_DB_MSK 0x00000100 +#define RC32434_QSC_DBSP_BIT 9 +#define RC32434_QSC_DBSP_MSK 0x01fffe00 +#define RC32434_QSC_BDP_BIT 25 +#define RC32434_QSC_BDP_MSK 0x7e000000 + +/* DDR LLC registers */ +#define RC32434_LLC_EAO_BIT 0 +#define RC32434_LLC_EAO_MSK 0x00000001 +#define RC32434_LLC_EO_BIT 1 +#define RC32434_LLC_EO_MSK 0x0000003e +#define RC32434_LLC_FS_BIT 6 +#define RC32434_LLC_FS_MSK 0x000000c0 +#define RC32434_LLC_AS_BIT 8 +#define RC32434_LLC_AS_MSK 0x00000700 +#define RC32434_LLC_SP_BIT 11 +#define RC32434_LLC_SP_MSK 0x001ff800 + +/* DDR LLFC registers */ +#define RC32434_LLFC_MSK(x) BIT_TO_MASK(x) +#define RC32434_LLFC_MEN_BIT 0 +#define RC32434_LLFC_EAN_BIT 1 +#define RC32434_LLFC_FF_BIT 2 + +/* DDR DLLTA registers */ +#define RC32434_DLLTA_ADDR_BIT 2 +#define RC32434_DLLTA_ADDR_MSK 0xfffffffc + +/* DDR DLLED registers */ +#define RC32434_DLLED_MSK(x) BIT_TO_MASK(x) +#define RC32434_DLLED_DBE_BIT 0 +#define RC32434_DLLED_DTE_BIT 1 + +#endif /* _ASM_RC32434_DDR_H_ */ diff --git a/arch/mips/include/asm/mach-rc32434/dma.h b/arch/mips/include/asm/mach-rc32434/dma.h new file mode 100644 index 000000000000..5f898b5873f7 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/dma.h @@ -0,0 +1,103 @@ +/* + * Copyright 2002 Integrated Device Technology, Inc. + * All rights reserved. + * + * DMA register definition. + * + * Author : ryan.holmQVist@idt.com + * Date : 20011005 + */ + +#ifndef __ASM_RC32434_DMA_H +#define __ASM_RC32434_DMA_H + +#include <asm/mach-rc32434/rb.h> + +#define DMA0_BASE_ADDR 0x18040000 + +/* + * DMA descriptor (in physical memory). + */ + +struct dma_desc { + u32 control; /* Control. use DMAD_* */ + u32 ca; /* Current Address. */ + u32 devcs; /* Device control and status. */ + u32 link; /* Next descriptor in chain. */ +}; + +#define DMA_DESC_SIZ sizeof(struct dma_desc) +#define DMA_DESC_COUNT_BIT 0 +#define DMA_DESC_COUNT_MSK 0x0003ffff +#define DMA_DESC_DS_BIT 20 +#define DMA_DESC_DS_MSK 0x00300000 + +#define DMA_DESC_DEV_CMD_BIT 22 +#define DMA_DESC_DEV_CMD_MSK 0x01c00000 + +/* DMA command sizes */ +#define DMA_DESC_DEV_CMD_BYTE 0 +#define DMA_DESC_DEV_CMD_HLF_WD 1 +#define DMA_DESC_DEV_CMD_WORD 2 +#define DMA_DESC_DEV_CMD_2WORDS 3 +#define DMA_DESC_DEV_CMD_4WORDS 4 +#define DMA_DESC_DEV_CMD_6WORDS 5 +#define DMA_DESC_DEV_CMD_8WORDS 6 +#define DMA_DESC_DEV_CMD_16WORDS 7 + +/* DMA descriptors interrupts */ +#define DMA_DESC_COF (1 << 25) /* Chain on finished */ +#define DMA_DESC_COD (1 << 26) /* Chain on done */ +#define DMA_DESC_IOF (1 << 27) /* Interrupt on finished */ +#define DMA_DESC_IOD (1 << 28) /* Interrupt on done */ +#define DMA_DESC_TERM (1 << 29) /* Terminated */ +#define DMA_DESC_DONE (1 << 30) /* Done */ +#define DMA_DESC_FINI (1 << 31) /* Finished */ + +/* + * DMA register (within Internal Register Map). + */ + +struct dma_reg { + u32 dmac; /* Control. */ + u32 dmas; /* Status. */ + u32 dmasm; /* Mask. */ + u32 dmadptr; /* Descriptor pointer. */ + u32 dmandptr; /* Next descriptor pointer. */ +}; + +/* DMA channels specific registers */ +#define DMA_CHAN_RUN_BIT (1 << 0) +#define DMA_CHAN_DONE_BIT (1 << 1) +#define DMA_CHAN_MODE_BIT (1 << 2) +#define DMA_CHAN_MODE_MSK 0x0000000c +#define DMA_CHAN_MODE_AUTO 0 +#define DMA_CHAN_MODE_BURST 1 +#define DMA_CHAN_MODE_XFRT 2 +#define DMA_CHAN_MODE_RSVD 3 +#define DMA_CHAN_ACT_BIT (1 << 4) + +/* DMA status registers */ +#define DMA_STAT_FINI (1 << 0) +#define DMA_STAT_DONE (1 << 1) +#define DMA_STAT_CHAIN (1 << 2) +#define DMA_STAT_ERR (1 << 3) +#define DMA_STAT_HALT (1 << 4) + +/* + * DMA channel definitions + */ + +#define DMA_CHAN_ETH_RCV 0 +#define DMA_CHAN_ETH_XMT 1 +#define DMA_CHAN_MEM_TO_FIFO 2 +#define DMA_CHAN_FIFO_TO_MEM 3 +#define DMA_CHAN_PCI_TO_MEM 4 +#define DMA_CHAN_MEM_TO_PCI 5 +#define DMA_CHAN_COUNT 6 + +struct dma_channel { + struct dma_reg ch[DMA_CHAN_COUNT]; +}; + +#endif /* __ASM_RC32434_DMA_H */ diff --git a/arch/mips/include/asm/mach-rc32434/dma_v.h b/arch/mips/include/asm/mach-rc32434/dma_v.h new file mode 100644 index 000000000000..173a9f9146cd --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/dma_v.h @@ -0,0 +1,52 @@ +/* + * Copyright 2002 Integrated Device Technology, Inc. + * All rights reserved. + * + * DMA register definition. + * + * Author : ryan.holmQVist@idt.com + * Date : 20011005 + */ + +#ifndef _ASM_RC32434_DMA_V_H_ +#define _ASM_RC32434_DMA_V_H_ + +#include <asm/mach-rc32434/dma.h> +#include <asm/mach-rc32434/rc32434.h> + +#define DMA_CHAN_OFFSET 0x14 +#define IS_DMA_USED(X) (((X) & \ + (DMA_DESC_FINI | DMA_DESC_DONE | DMA_DESC_TERM)) \ + != 0) +#define DMA_COUNT(count) ((count) & DMA_DESC_COUNT_MSK) + +#define DMA_HALT_TIMEOUT 500 + +static inline int rc32434_halt_dma(struct dma_reg *ch) +{ + int timeout = 1; + if (__raw_readl(&ch->dmac) & DMA_CHAN_RUN_BIT) { + __raw_writel(0, &ch->dmac); + for (timeout = DMA_HALT_TIMEOUT; timeout > 0; timeout--) { + if (__raw_readl(&ch->dmas) & DMA_STAT_HALT) { + __raw_writel(0, &ch->dmas); + break; + } + } + } + + return timeout ? 0 : 1; +} + +static inline void rc32434_start_dma(struct dma_reg *ch, u32 dma_addr) +{ + __raw_writel(0, &ch->dmandptr); + __raw_writel(dma_addr, &ch->dmadptr); +} + +static inline void rc32434_chain_dma(struct dma_reg *ch, u32 dma_addr) +{ + __raw_writel(dma_addr, &ch->dmandptr); +} + +#endif /* _ASM_RC32434_DMA_V_H_ */ diff --git a/arch/mips/include/asm/mach-rc32434/eth.h b/arch/mips/include/asm/mach-rc32434/eth.h new file mode 100644 index 000000000000..a25cbc56173d --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/eth.h @@ -0,0 +1,220 @@ +/* + * Definitions for the Ethernet registers + * + * Copyright 2002 Allend Stichter <allen.stichter@idt.com> + * Copyright 2008 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __ASM_RC32434_ETH_H +#define __ASM_RC32434_ETH_H + + +#define ETH0_BASE_ADDR 0x18060000 + +struct eth_regs { + u32 ethintfc; + u32 ethfifott; + u32 etharc; + u32 ethhash0; + u32 ethhash1; + u32 ethu0[4]; /* Reserved. */ + u32 ethpfs; + u32 ethmcp; + u32 eth_u1[10]; /* Reserved. */ + u32 ethspare; + u32 eth_u2[42]; /* Reserved. */ + u32 ethsal0; + u32 ethsah0; + u32 ethsal1; + u32 ethsah1; + u32 ethsal2; + u32 ethsah2; + u32 ethsal3; + u32 ethsah3; + u32 ethrbc; + u32 ethrpc; + u32 ethrupc; + u32 ethrfc; + u32 ethtbc; + u32 ethgpf; + u32 eth_u9[50]; /* Reserved. */ + u32 ethmac1; + u32 ethmac2; + u32 ethipgt; + u32 ethipgr; + u32 ethclrt; + u32 ethmaxf; + u32 eth_u10; /* Reserved. */ + u32 ethmtest; + u32 miimcfg; + u32 miimcmd; + u32 miimaddr; + u32 miimwtd; + u32 miimrdd; + u32 miimind; + u32 eth_u11; /* Reserved. */ + u32 eth_u12; /* Reserved. */ + u32 ethcfsa0; + u32 ethcfsa1; + u32 ethcfsa2; +}; + +/* Ethernet interrupt registers */ +#define ETH_INT_FC_EN (1 << 0) +#define ETH_INT_FC_ITS (1 << 1) +#define ETH_INT_FC_RIP (1 << 2) +#define ETH_INT_FC_JAM (1 << 3) +#define ETH_INT_FC_OVR (1 << 4) +#define ETH_INT_FC_UND (1 << 5) +#define ETH_INT_FC_IOC 0x000000c0 + +/* Ethernet FIFO registers */ +#define ETH_FIFI_TT_TTH_BIT 0 +#define ETH_FIFO_TT_TTH 0x0000007f + +/* Ethernet ARC/multicast registers */ +#define ETH_ARC_PRO (1 << 0) +#define ETH_ARC_AM (1 << 1) +#define ETH_ARC_AFM (1 << 2) +#define ETH_ARC_AB (1 << 3) + +/* Ethernet SAL registers */ +#define ETH_SAL_BYTE_5 0x000000ff +#define ETH_SAL_BYTE_4 0x0000ff00 +#define ETH_SAL_BYTE_3 0x00ff0000 +#define ETH_SAL_BYTE_2 0xff000000 + +/* Ethernet SAH registers */ +#define ETH_SAH_BYTE1 0x000000ff +#define ETH_SAH_BYTE0 0x0000ff00 + +/* Ethernet GPF register */ +#define ETH_GPF_PTV 0x0000ffff + +/* Ethernet PFG register */ +#define ETH_PFS_PFD (1 << 0) + +/* Ethernet CFSA[0-3] registers */ +#define ETH_CFSA0_CFSA4 0x000000ff +#define ETH_CFSA0_CFSA5 0x0000ff00 +#define ETH_CFSA1_CFSA2 0x000000ff +#define ETH_CFSA1_CFSA3 0x0000ff00 +#define ETH_CFSA1_CFSA0 0x000000ff +#define ETH_CFSA1_CFSA1 0x0000ff00 + +/* Ethernet MAC1 registers */ +#define ETH_MAC1_RE (1 << 0) +#define ETH_MAC1_PAF (1 << 1) +#define ETH_MAC1_RFC (1 << 2) +#define ETH_MAC1_TFC (1 << 3) +#define ETH_MAC1_LB (1 << 4) +#define ETH_MAC1_MR (1 << 31) + +/* Ethernet MAC2 registers */ +#define ETH_MAC2_FD (1 << 0) +#define ETH_MAC2_FLC (1 << 1) +#define ETH_MAC2_HFE (1 << 2) +#define ETH_MAC2_DC (1 << 3) +#define ETH_MAC2_CEN (1 << 4) +#define ETH_MAC2_PE (1 << 5) +#define ETH_MAC2_VPE (1 << 6) +#define ETH_MAC2_APE (1 << 7) +#define ETH_MAC2_PPE (1 << 8) +#define ETH_MAC2_LPE (1 << 9) +#define ETH_MAC2_NB (1 << 12) +#define ETH_MAC2_BP (1 << 13) +#define ETH_MAC2_ED (1 << 14) + +/* Ethernet IPGT register */ +#define ETH_IPGT 0x0000007f + +/* Ethernet IPGR registers */ +#define ETH_IPGR_IPGR2 0x0000007f +#define ETH_IPGR_IPGR1 0x00007f00 + +/* Ethernet CLRT registers */ +#define ETH_CLRT_MAX_RET 0x0000000f +#define ETH_CLRT_COL_WIN 0x00003f00 + +/* Ethernet MAXF register */ +#define ETH_MAXF 0x0000ffff + +/* Ethernet test registers */ +#define ETH_TEST_REG (1 << 2) +#define ETH_MCP_DIV 0x000000ff + +/* MII registers */ +#define ETH_MII_CFG_RSVD 0x0000000c +#define ETH_MII_CMD_RD (1 << 0) +#define ETH_MII_CMD_SCN (1 << 1) +#define ETH_MII_REG_ADDR 0x0000001f +#define ETH_MII_PHY_ADDR 0x00001f00 +#define ETH_MII_WTD_DATA 0x0000ffff +#define ETH_MII_RDD_DATA 0x0000ffff +#define ETH_MII_IND_BSY (1 << 0) +#define ETH_MII_IND_SCN (1 << 1) +#define ETH_MII_IND_NV (1 << 2) + +/* + * Values for the DEVCS field of the Ethernet DMA Rx and Tx descriptors. + */ + +#define ETH_RX_FD (1 << 0) +#define ETH_RX_LD (1 << 1) +#define ETH_RX_ROK (1 << 2) +#define ETH_RX_FM (1 << 3) +#define ETH_RX_MP (1 << 4) +#define ETH_RX_BP (1 << 5) +#define ETH_RX_VLT (1 << 6) +#define ETH_RX_CF (1 << 7) +#define ETH_RX_OVR (1 << 8) +#define ETH_RX_CRC (1 << 9) +#define ETH_RX_CV (1 << 10) +#define ETH_RX_DB (1 << 11) +#define ETH_RX_LE (1 << 12) +#define ETH_RX_LOR (1 << 13) +#define ETH_RX_CES (1 << 14) +#define ETH_RX_LEN_BIT 16 +#define ETH_RX_LEN 0xffff0000 + +#define ETH_TX_FD (1 << 0) +#define ETH_TX_LD (1 << 1) +#define ETH_TX_OEN (1 << 2) +#define ETH_TX_PEN (1 << 3) +#define ETH_TX_CEN (1 << 4) +#define ETH_TX_HEN (1 << 5) +#define ETH_TX_TOK (1 << 6) +#define ETH_TX_MP (1 << 7) +#define ETH_TX_BP (1 << 8) +#define ETH_TX_UND (1 << 9) +#define ETH_TX_OF (1 << 10) +#define ETH_TX_ED (1 << 11) +#define ETH_TX_EC (1 << 12) +#define ETH_TX_LC (1 << 13) +#define ETH_TX_TD (1 << 14) +#define ETH_TX_CRC (1 << 15) +#define ETH_TX_LE (1 << 16) +#define ETH_TX_CC 0x001E0000 + +#endif /* __ASM_RC32434_ETH_H */ diff --git a/arch/mips/include/asm/mach-rc32434/gpio.h b/arch/mips/include/asm/mach-rc32434/gpio.h new file mode 100644 index 000000000000..c8e554eafce3 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/gpio.h @@ -0,0 +1,88 @@ +/* + * Copyright 2002 Integrated Device Technology, Inc. + * All rights reserved. + * + * GPIO register definition. + * + * Author : ryan.holmQVist@idt.com + * Date : 20011005 + * Copyright (C) 2001, 2002 Ryan Holm <ryan.holmQVist@idt.com> + * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> + */ + +#ifndef _RC32434_GPIO_H_ +#define _RC32434_GPIO_H_ + +#include <linux/types.h> +#include <asm-generic/gpio.h> + +#define NR_BUILTIN_GPIO 32 + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep + +#define gpio_to_irq(gpio) (8 + 4 * 32 + gpio) +#define irq_to_gpio(irq) (irq - (8 + 4 * 32)) + +struct rb532_gpio_reg { + u32 gpiofunc; /* GPIO Function Register + * gpiofunc[x]==0 bit = gpio + * func[x]==1 bit = altfunc + */ + u32 gpiocfg; /* GPIO Configuration Register + * gpiocfg[x]==0 bit = input + * gpiocfg[x]==1 bit = output + */ + u32 gpiod; /* GPIO Data Register + * gpiod[x] read/write gpio pinX status + */ + u32 gpioilevel; /* GPIO Interrupt Status Register + * interrupt level (see gpioistat) + */ + u32 gpioistat; /* Gpio Interrupt Status Register + * istat[x] = (gpiod[x] == level[x]) + * cleared in ISR (STICKY bits) + */ + u32 gpionmien; /* GPIO Non-maskable Interrupt Enable Register */ +}; + +/* UART GPIO signals */ +#define RC32434_UART0_SOUT (1 << 0) +#define RC32434_UART0_SIN (1 << 1) +#define RC32434_UART0_RTS (1 << 2) +#define RC32434_UART0_CTS (1 << 3) + +/* M & P bus GPIO signals */ +#define RC32434_MP_BIT_22 (1 << 4) +#define RC32434_MP_BIT_23 (1 << 5) +#define RC32434_MP_BIT_24 (1 << 6) +#define RC32434_MP_BIT_25 (1 << 7) + +/* CPU GPIO signals */ +#define RC32434_CPU_GPIO (1 << 8) + +/* Reserved GPIO signals */ +#define RC32434_AF_SPARE_6 (1 << 9) +#define RC32434_AF_SPARE_4 (1 << 10) +#define RC32434_AF_SPARE_3 (1 << 11) +#define RC32434_AF_SPARE_2 (1 << 12) + +/* PCI messaging unit */ +#define RC32434_PCI_MSU_GPIO (1 << 13) + +/* NAND GPIO signals */ +#define GPIO_RDY 8 +#define GPIO_WPX 9 +#define GPIO_ALE 10 +#define GPIO_CLE 11 + +/* Compact Flash GPIO pin */ +#define CF_GPIO_NUM 13 + +extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val); +extern unsigned get_434_reg(unsigned reg_offs); +extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask); +extern unsigned char get_latch_u5(void); + +#endif /* _RC32434_GPIO_H_ */ diff --git a/arch/mips/include/asm/mach-rc32434/integ.h b/arch/mips/include/asm/mach-rc32434/integ.h new file mode 100644 index 000000000000..fa65bc3d8807 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/integ.h @@ -0,0 +1,59 @@ +/* + * Definitions for the Watchdog registers + * + * Copyright 2002 Ryan Holm <ryan.holmQVist@idt.com> + * Copyright 2008 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __RC32434_INTEG_H__ +#define __RC32434_INTEG_H__ + +#include <asm/mach-rc32434/rb.h> + +#define INTEG0_BASE_ADDR 0x18030030 + +struct integ { + u32 errcs; /* sticky use ERRCS_ */ + u32 wtcount; /* Watchdog timer count reg. */ + u32 wtcompare; /* Watchdog timer timeout value. */ + u32 wtc; /* Watchdog timer control. use WTC_ */ +}; + +/* Error counters */ +#define RC32434_ERR_WTO 0 +#define RC32434_ERR_WNE 1 +#define RC32434_ERR_UCW 2 +#define RC32434_ERR_UCR 3 +#define RC32434_ERR_UPW 4 +#define RC32434_ERR_UPR 5 +#define RC32434_ERR_UDW 6 +#define RC32434_ERR_UDR 7 +#define RC32434_ERR_SAE 8 +#define RC32434_ERR_WRE 9 + +/* Watchdog control bits */ +#define RC32434_WTC_EN 0 +#define RC32434_WTC_TO 1 + +#endif /* __RC32434_INTEG_H__ */ diff --git a/arch/mips/include/asm/mach-rc32434/irq.h b/arch/mips/include/asm/mach-rc32434/irq.h new file mode 100644 index 000000000000..56738d8ec4e2 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/irq.h @@ -0,0 +1,33 @@ +#ifndef __ASM_RC32434_IRQ_H +#define __ASM_RC32434_IRQ_H + +#define NR_IRQS 256 + +#include <asm/mach-generic/irq.h> +#include <asm/mach-rc32434/rb.h> + +/* Interrupt Controller */ +#define IC_GROUP0_PEND (REGBASE + 0x38000) +#define IC_GROUP0_MASK (REGBASE + 0x38008) +#define IC_GROUP_OFFSET 0x0C + +#define NUM_INTR_GROUPS 5 + +/* 16550 UARTs */ +#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */ + /* GRP3 IRQ numbers start here */ +#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32) + /* GRP4 IRQ numbers start here */ +#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32) + /* GRP5 IRQ numbers start here */ +#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32) +#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32) + +#define UART0_IRQ (GROUP3_IRQ_BASE + 0) + +#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0) +#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1) +#define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9) +#define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10) + +#endif /* __ASM_RC32434_IRQ_H */ diff --git a/arch/mips/include/asm/mach-rc32434/pci.h b/arch/mips/include/asm/mach-rc32434/pci.h new file mode 100644 index 000000000000..410638f2af74 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/pci.h @@ -0,0 +1,481 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Copyright 2004 IDT Inc. (rischelp@idt.com) + * + * Initial Release + */ + +#ifndef _ASM_RC32434_PCI_H_ +#define _ASM_RC32434_PCI_H_ + +#define epld_mask ((volatile unsigned char *)0xB900000d) + +#define PCI0_BASE_ADDR 0x18080000 +#define PCI_LBA_COUNT 4 + +struct pci_map { + u32 address; /* Address. */ + u32 control; /* Control. */ + u32 mapping; /* mapping. */ +}; + +struct pci_reg { + u32 pcic; + u32 pcis; + u32 pcism; + u32 pcicfga; + u32 pcicfgd; + volatile struct pci_map pcilba[PCI_LBA_COUNT]; + u32 pcidac; + u32 pcidas; + u32 pcidasm; + u32 pcidad; + u32 pcidma8c; + u32 pcidma9c; + u32 pcitc; +}; + +#define PCI_MSU_COUNT 2 + +struct pci_msu { + u32 pciim[PCI_MSU_COUNT]; + u32 pciom[PCI_MSU_COUNT]; + u32 pciid; + u32 pciiic; + u32 pciiim; + u32 pciiod; + u32 pciioic; + u32 pciioim; +}; + +/* + * PCI Control Register + */ + +#define PCI_CTL_EN (1 << 0) +#define PCI_CTL_TNR (1 << 1) +#define PCI_CTL_SCE (1 << 2) +#define PCI_CTL_IEN (1 << 3) +#define PCI_CTL_AAA (1 << 4) +#define PCI_CTL_EAP (1 << 5) +#define PCI_CTL_PCIM_BIT 6 +#define PCI_CTL_PCIM 0x000001c0 + +#define PCI_CTL_PCIM_DIS 0 +#define PCI_CTL_PCIM_TNR 1 /* Satellite - target not ready */ +#define PCI_CTL_PCIM_SUS 2 /* Satellite - suspended CPU. */ +#define PCI_CTL_PCIM_EXT 3 /* Host - external arbiter. */ +#define PCI_CTL PCIM_PRIO 4 /* Host - fixed priority arb. */ +#define PCI_CTL_PCIM_RR 5 /* Host - round robin priority. */ +#define PCI_CTL_PCIM_RSVD6 6 +#define PCI_CTL_PCIM_RSVD7 7 + +#define PCI_CTL_IGM (1 << 9) + +/* + * PCI Status Register + */ + +#define PCI_STAT_EED (1 << 0) +#define PCI_STAT_WR (1 << 1) +#define PCI_STAT_NMI (1 << 2) +#define PCI_STAT_II (1 << 3) +#define PCI_STAT_CWE (1 << 4) +#define PCI_STAT_CRE (1 << 5) +#define PCI_STAT_MDPE (1 << 6) +#define PCI_STAT_STA (1 << 7) +#define PCI_STAT_RTA (1 << 8) +#define PCI_STAT_RMA (1 << 9) +#define PCI_STAT_SSE (1 << 10) +#define PCI_STAT_OSE (1 << 11) +#define PCI_STAT_PE (1 << 12) +#define PCI_STAT_TAE (1 << 13) +#define PCI_STAT_RLE (1 << 14) +#define PCI_STAT_BME (1 << 15) +#define PCI_STAT_PRD (1 << 16) +#define PCI_STAT_RIP (1 << 17) + +/* + * PCI Status Mask Register + */ + +#define PCI_STATM_EED PCI_STAT_EED +#define PCI_STATM_WR PCI_STAT_WR +#define PCI_STATM_NMI PCI_STAT_NMI +#define PCI_STATM_II PCI_STAT_II +#define PCI_STATM_CWE PCI_STAT_CWE +#define PCI_STATM_CRE PCI_STAT_CRE +#define PCI_STATM_MDPE PCI_STAT_MDPE +#define PCI_STATM_STA PCI_STAT_STA +#define PCI_STATM_RTA PCI_STAT_RTA +#define PCI_STATM_RMA PCI_STAT_RMA +#define PCI_STATM_SSE PCI_STAT_SSE +#define PCI_STATM_OSE PCI_STAT_OSE +#define PCI_STATM_PE PCI_STAT_PE +#define PCI_STATM_TAE PCI_STAT_TAE +#define PCI_STATM_RLE PCI_STAT_RLE +#define PCI_STATM_BME PCI_STAT_BME +#define PCI_STATM_PRD PCI_STAT_PRD +#define PCI_STATM_RIP PCI_STAT_RIP + +/* + * PCI Configuration Address Register + */ +#define PCI_CFGA_REG_BIT 2 +#define PCI_CFGA_REG 0x000000fc +#define PCI_CFGA_REG_ID (0x00 >> 2) /* use PCFGID */ +#define PCI_CFGA_REG_04 (0x04 >> 2) /* use PCFG04_ */ +#define PCI_CFGA_REG_08 (0x08 >> 2) /* use PCFG08_ */ +#define PCI_CFGA_REG_0C (0x0C >> 2) /* use PCFG0C_ */ +#define PCI_CFGA_REG_PBA0 (0x10 >> 2) /* use PCIPBA_ */ +#define PCI_CFGA_REG_PBA1 (0x14 >> 2) /* use PCIPBA_ */ +#define PCI_CFGA_REG_PBA2 (0x18 >> 2) /* use PCIPBA_ */ +#define PCI_CFGA_REG_PBA3 (0x1c >> 2) /* use PCIPBA_ */ +#define PCI_CFGA_REG_SUBSYS (0x2c >> 2) /* use PCFGSS_ */ +#define PCI_CFGA_REG_3C (0x3C >> 2) /* use PCFG3C_ */ +#define PCI_CFGA_REG_PBBA0C (0x44 >> 2) /* use PCIPBAC_ */ +#define PCI_CFGA_REG_PBA0M (0x48 >> 2) +#define PCI_CFGA_REG_PBA1C (0x4c >> 2) /* use PCIPBAC_ */ +#define PCI_CFGA_REG_PBA1M (0x50 >> 2) +#define PCI_CFGA_REG_PBA2C (0x54 >> 2) /* use PCIPBAC_ */ +#define PCI_CFGA_REG_PBA2M (0x58 >> 2) +#define PCI_CFGA_REG_PBA3C (0x5c >> 2) /* use PCIPBAC_ */ +#define PCI_CFGA_REG_PBA3M (0x60 >> 2) +#define PCI_CFGA_REG_PMGT (0x64 >> 2) +#define PCI_CFGA_FUNC_BIT 8 +#define PCI_CFGA_FUNC 0x00000700 +#define PCI_CFGA_DEV_BIT 11 +#define PCI_CFGA_DEV 0x0000f800 +#define PCI_CFGA_DEV_INTERN 0 +#define PCI_CFGA_BUS_BIT 16 +#define PCI CFGA_BUS 0x00ff0000 +#define PCI_CFGA_BUS_TYPE0 0 +#define PCI_CFGA_EN (1 << 31) + +/* PCI CFG04 commands */ +#define PCI_CFG04_CMD_IO_ENA (1 << 0) +#define PCI_CFG04_CMD_MEM_ENA (1 << 1) +#define PCI_CFG04_CMD_BM_ENA (1 << 2) +#define PCI_CFG04_CMD_MW_INV (1 << 4) +#define PCI_CFG04_CMD_PAR_ENA (1 << 6) +#define PCI_CFG04_CMD_SER_ENA (1 << 8) +#define PCI_CFG04_CMD_FAST_ENA (1 << 9) + +/* PCI CFG04 status fields */ +#define PCI_CFG04_STAT_BIT 16 +#define PCI_CFG04_STAT 0xffff0000 +#define PCI_CFG04_STAT_66_MHZ (1 << 21) +#define PCI_CFG04_STAT_FBB (1 << 23) +#define PCI_CFG04_STAT_MDPE (1 << 24) +#define PCI_CFG04_STAT_DST (1 << 25) +#define PCI_CFG04_STAT_STA (1 << 27) +#define PCI_CFG04_STAT_RTA (1 << 28) +#define PCI_CFG04_STAT_RMA (1 << 29) +#define PCI_CFG04_STAT_SSE (1 << 30) +#define PCI_CFG04_STAT_PE (1 << 31) + +#define PCI_PBA_MSI (1 << 0) +#define PCI_PBA_P (1 << 2) + +/* PCI PBAC registers */ +#define PCI_PBAC_MSI (1 << 0) +#define PCI_PBAC_P (1 << 1) +#define PCI_PBAC_SIZE_BIT 2 +#define PCI_PBAC_SIZE 0x0000007c +#define PCI_PBAC_SB (1 << 7) +#define PCI_PBAC_PP (1 << 8) +#define PCI_PBAC_MR_BIT 9 +#define PCI_PBAC_MR 0x00000600 +#define PCI_PBAC_MR_RD 0 +#define PCI_PBAC_MR_RD_LINE 1 +#define PCI_PBAC_MR_RD_MULT 2 +#define PCI_PBAC_MRL (1 << 11) +#define PCI_PBAC_MRM (1 << 12) +#define PCI_PBAC_TRP (1 << 13) + +#define PCI_CFG40_TRDY_TIM 0x000000ff +#define PCI_CFG40_RET_LIM 0x0000ff00 + +/* + * PCI Local Base Address [0|1|2|3] Register + */ + +#define PCI_LBA_BADDR_BIT 0 +#define PCI_LBA_BADDR 0xffffff00 + +/* + * PCI Local Base Address Control Register + */ + +#define PCI_LBAC_MSI (1 << 0) +#define PCI_LBAC_MSI_MEM 0 +#define PCI_LBAC_MSI_IO 1 +#define PCI_LBAC_SIZE_BIT 2 +#define PCI_LBAC_SIZE 0x0000007c +#define PCI_LBAC_SB (1 << 7) +#define PCI_LBAC_RT (1 << 8) +#define PCI_LBAC_RT_NO_PREF 0 +#define PCI_LBAC_RT_PREF 1 + +/* + * PCI Local Base Address [0|1|2|3] Mapping Register + */ +#define PCI_LBAM_MADDR_BIT 8 +#define PCI_LBAM_MADDR 0xffffff00 + +/* + * PCI Decoupled Access Control Register + */ +#define PCI_DAC_DEN (1 << 0) + +/* + * PCI Decoupled Access Status Register + */ +#define PCI_DAS_D (1 << 0) +#define PCI_DAS_B (1 << 1) +#define PCI_DAS_E (1 << 2) +#define PCI_DAS_OFE (1 << 3) +#define PCI_DAS_OFF (1 << 4) +#define PCI_DAS_IFE (1 << 5) +#define PCI_DAS_IFF (1 << 6) + +/* + * PCI DMA Channel 8 Configuration Register + */ +#define PCI_DMA8C_MBS_BIT 0 +#define PCI_DMA8C_MBS 0x00000fff /* Maximum Burst Size. */ +#define PCI_DMA8C_OUR (1 << 12) + +/* + * PCI DMA Channel 9 Configuration Register + */ +#define PCI_DMA9C_MBS_BIT 0 /* Maximum Burst Size. */ +#define PCI_DMA9C_MBS 0x00000fff + +/* + * PCI to Memory(DMA Channel 8) AND Memory to PCI DMA(DMA Channel 9)Descriptors + */ + +#define PCI_DMAD_PT_BIT 22 /* in DEVCMD field (descriptor) */ +#define PCI_DMAD_PT 0x00c00000 /* preferred transaction field */ +/* These are for reads (DMA channel 8) */ +#define PCI_DMAD_DEVCMD_MR 0 /* memory read */ +#define PCI_DMAD_DEVCMD_MRL 1 /* memory read line */ +#define PCI_DMAD_DEVCMD_MRM 2 /* memory read multiple */ +#define PCI_DMAD_DEVCMD_IOR 3 /* I/O read */ +/* These are for writes (DMA channel 9) */ +#define PCI_DMAD_DEVCMD_MW 0 /* memory write */ +#define PCI_DMAD_DEVCMD_MWI 1 /* memory write invalidate */ +#define PCI_DMAD_DEVCMD_IOW 3 /* I/O write */ + +/* Swap byte field applies to both DMA channel 8 and 9 */ +#define PCI_DMAD_SB (1 << 24) /* swap byte field */ + + +/* + * PCI Target Control Register + */ + +#define PCI_TC_RTIMER_BIT 0 +#define PCI_TC_RTIMER 0x000000ff +#define PCI_TC_DTIMER_BIT 8 +#define PCI_TC_DTIMER 0x0000ff00 +#define PCI_TC_RDR (1 << 18) +#define PCI_TC_DDT (1 << 19) + +/* + * PCI messaging unit [applies to both inbound and outbound registers ] + */ +#define PCI_MSU_M0 (1 << 0) +#define PCI_MSU_M1 (1 << 1) +#define PCI_MSU_DB (1 << 2) + +#define PCI_MSG_ADDR 0xB8088010 +#define PCI0_ADDR 0xB8080000 +#define rc32434_pci ((struct pci_reg *) PCI0_ADDR) +#define rc32434_pci_msg ((struct pci_msu *) PCI_MSG_ADDR) + +#define PCIM_SHFT 0x6 +#define PCIM_BIT_LEN 0x7 +#define PCIM_H_EA 0x3 +#define PCIM_H_IA_FIX 0x4 +#define PCIM_H_IA_RR 0x5 +#if 0 +#define PCI_ADDR_START 0x13000000 +#endif + +#define PCI_ADDR_START 0x50000000 + +#define CPUTOPCI_MEM_WIN 0x02000000 +#define CPUTOPCI_IO_WIN 0x00100000 +#define PCILBA_SIZE_SHFT 2 +#define PCILBA_SIZE_MASK 0x1F +#define SIZE_256MB 0x1C +#define SIZE_128MB 0x1B +#define SIZE_64MB 0x1A +#define SIZE_32MB 0x19 +#define SIZE_16MB 0x18 +#define SIZE_4MB 0x16 +#define SIZE_2MB 0x15 +#define SIZE_1MB 0x14 +#define KORINA_CONFIG0_ADDR 0x80000000 +#define KORINA_CONFIG1_ADDR 0x80000004 +#define KORINA_CONFIG2_ADDR 0x80000008 +#define KORINA_CONFIG3_ADDR 0x8000000C +#define KORINA_CONFIG4_ADDR 0x80000010 +#define KORINA_CONFIG5_ADDR 0x80000014 +#define KORINA_CONFIG6_ADDR 0x80000018 +#define KORINA_CONFIG7_ADDR 0x8000001C +#define KORINA_CONFIG8_ADDR 0x80000020 +#define KORINA_CONFIG9_ADDR 0x80000024 +#define KORINA_CONFIG10_ADDR 0x80000028 +#define KORINA_CONFIG11_ADDR 0x8000002C +#define KORINA_CONFIG12_ADDR 0x80000030 +#define KORINA_CONFIG13_ADDR 0x80000034 +#define KORINA_CONFIG14_ADDR 0x80000038 +#define KORINA_CONFIG15_ADDR 0x8000003C +#define KORINA_CONFIG16_ADDR 0x80000040 +#define KORINA_CONFIG17_ADDR 0x80000044 +#define KORINA_CONFIG18_ADDR 0x80000048 +#define KORINA_CONFIG19_ADDR 0x8000004C +#define KORINA_CONFIG20_ADDR 0x80000050 +#define KORINA_CONFIG21_ADDR 0x80000054 +#define KORINA_CONFIG22_ADDR 0x80000058 +#define KORINA_CONFIG23_ADDR 0x8000005C +#define KORINA_CONFIG24_ADDR 0x80000060 +#define KORINA_CONFIG25_ADDR 0x80000064 +#define KORINA_CMD (PCI_CFG04_CMD_IO_ENA | \ + PCI_CFG04_CMD_MEM_ENA | \ + PCI_CFG04_CMD_BM_ENA | \ + PCI_CFG04_CMD_MW_INV | \ + PCI_CFG04_CMD_PAR_ENA | \ + PCI_CFG04_CMD_SER_ENA) + +#define KORINA_STAT (PCI_CFG04_STAT_MDPE | \ + PCI_CFG04_STAT_STA | \ + PCI_CFG04_STAT_RTA | \ + PCI_CFG04_STAT_RMA | \ + PCI_CFG04_STAT_SSE | \ + PCI_CFG04_STAT_PE) + +#define KORINA_CNFG1 ((KORINA_STAT<<16)|KORINA_CMD) + +#define KORINA_REVID 0 +#define KORINA_CLASS_CODE 0 +#define KORINA_CNFG2 ((KORINA_CLASS_CODE<<8) | \ + KORINA_REVID) + +#define KORINA_CACHE_LINE_SIZE 4 +#define KORINA_MASTER_LAT 0x3c +#define KORINA_HEADER_TYPE 0 +#define KORINA_BIST 0 + +#define KORINA_CNFG3 ((KORINA_BIST << 24) | \ + (KORINA_HEADER_TYPE<<16) | \ + (KORINA_MASTER_LAT<<8) | \ + KORINA_CACHE_LINE_SIZE) + +#define KORINA_BAR0 0x00000008 /* 128 MB Memory */ +#define KORINA_BAR1 0x18800001 /* 1 MB IO */ +#define KORINA_BAR2 0x18000001 /* 2 MB IO window for Korina + internal Registers */ +#define KORINA_BAR3 0x48000008 /* Spare 128 MB Memory */ + +#define KORINA_CNFG4 KORINA_BAR0 +#define KORINA_CNFG5 KORINA_BAR1 +#define KORINA_CNFG6 KORINA_BAR2 +#define KORINA_CNFG7 KORINA_BAR3 + +#define KORINA_SUBSYS_VENDOR_ID 0x011d +#define KORINA_SUBSYSTEM_ID 0x0214 +#define KORINA_CNFG8 0 +#define KORINA_CNFG9 0 +#define KORINA_CNFG10 0 +#define KORINA_CNFG11 ((KORINA_SUBSYS_VENDOR_ID<<16) | \ + KORINA_SUBSYSTEM_ID) +#define KORINA_INT_LINE 1 +#define KORINA_INT_PIN 1 +#define KORINA_MIN_GNT 8 +#define KORINA_MAX_LAT 0x38 +#define KORINA_CNFG12 0 +#define KORINA_CNFG13 0 +#define KORINA_CNFG14 0 +#define KORINA_CNFG15 ((KORINA_MAX_LAT<<24) | \ + (KORINA_MIN_GNT<<16) | \ + (KORINA_INT_PIN<<8) | \ + KORINA_INT_LINE) +#define KORINA_RETRY_LIMIT 0x80 +#define KORINA_TRDY_LIMIT 0x80 +#define KORINA_CNFG16 ((KORINA_RETRY_LIMIT<<8) | \ + KORINA_TRDY_LIMIT) +#define PCI_PBAxC_R 0x0 +#define PCI_PBAxC_RL 0x1 +#define PCI_PBAxC_RM 0x2 +#define SIZE_SHFT 2 + +#if defined(__MIPSEB__) +#define KORINA_PBA0C (PCI_PBAC_MRL | PCI_PBAC_SB | \ + ((PCI_PBAxC_RM & 0x3) << PCI_PBAC_MR_BIT) | \ + PCI_PBAC_PP | \ + (SIZE_128MB<<SIZE_SHFT) | \ + PCI_PBAC_P) +#else +#define KORINA_PBA0C (PCI_PBAC_MRL | \ + ((PCI_PBAxC_RM & 0x3) << PCI_PBAC_MR_BIT) | \ + PCI_PBAC_PP | \ + (SIZE_128MB<<SIZE_SHFT) | \ + PCI_PBAC_P) +#endif +#define KORINA_CNFG17 KORINA_PBA0C +#define KORINA_PBA0M 0x0 +#define KORINA_CNFG18 KORINA_PBA0M + +#if defined(__MIPSEB__) +#define KORINA_PBA1C ((SIZE_1MB<<SIZE_SHFT) | PCI_PBAC_SB | \ + PCI_PBAC_MSI) +#else +#define KORINA_PBA1C ((SIZE_1MB<<SIZE_SHFT) | \ + PCI_PBAC_MSI) +#endif +#define KORINA_CNFG19 KORINA_PBA1C +#define KORINA_PBA1M 0x0 +#define KORINA_CNFG20 KORINA_PBA1M + +#if defined(__MIPSEB__) +#define KORINA_PBA2C ((SIZE_2MB<<SIZE_SHFT) | PCI_PBAC_SB | \ + PCI_PBAC_MSI) +#else +#define KORINA_PBA2C ((SIZE_2MB<<SIZE_SHFT) | \ + PCI_PBAC_MSI) +#endif +#define KORINA_CNFG21 KORINA_PBA2C +#define KORINA_PBA2M 0x18000000 +#define KORINA_CNFG22 KORINA_PBA2M +#define KORINA_PBA3C 0 +#define KORINA_CNFG23 KORINA_PBA3C +#define KORINA_PBA3M 0 +#define KORINA_CNFG24 KORINA_PBA3M + +#define PCITC_DTIMER_VAL 8 +#define PCITC_RTIMER_VAL 0x10 + +#endif /* __ASM_RC32434_PCI_H */ diff --git a/arch/mips/include/asm/mach-rc32434/prom.h b/arch/mips/include/asm/mach-rc32434/prom.h new file mode 100644 index 000000000000..660707f1bcce --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/prom.h @@ -0,0 +1,40 @@ +/* + * Definitions for the PROM + * + * Copyright 2002 Ryan Holm <ryan.holmQVist@idt.com> + * Copyright 2008 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#define PROM_ENTRY(x) (0xbfc00000 + ((x) * 8)) + +#define SR_NMI 0x00180000 +#define SERIAL_SPEED_ENTRY 0x00000001 + +#define FREQ_TAG "HZ=" +#define KMAC_TAG "kmac=" +#define MEM_TAG "mem=" +#define BOARD_TAG "board=" + +#define BOARD_RB532 "500" +#define BOARD_RB532A "500r5" diff --git a/arch/mips/include/asm/mach-rc32434/rb.h b/arch/mips/include/asm/mach-rc32434/rb.h new file mode 100644 index 000000000000..79e8ef67d0d3 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/rb.h @@ -0,0 +1,84 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2004 IDT Inc. + * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> + */ +#ifndef __ASM_RC32434_RB_H +#define __ASM_RC32434_RB_H + +#include <linux/genhd.h> + +#define REGBASE 0x18000000 +#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(REGBASE)) +#define UART0BASE 0x58000 +#define RST (1 << 15) +#define DEV0BASE 0x010000 +#define DEV0MASK 0x010004 +#define DEV0C 0x010008 +#define DEV0T 0x01000C +#define DEV1BASE 0x010010 +#define DEV1MASK 0x010014 +#define DEV1C 0x010018 +#define DEV1TC 0x01001C +#define DEV2BASE 0x010020 +#define DEV2MASK 0x010024 +#define DEV2C 0x010028 +#define DEV2TC 0x01002C +#define DEV3BASE 0x010030 +#define DEV3MASK 0x010034 +#define DEV3C 0x010038 +#define DEV3TC 0x01003C +#define BTCS 0x010040 +#define BTCOMPARE 0x010044 +#define GPIOBASE 0x050000 +#define GPIOCFG 0x050004 +#define GPIOD 0x050008 +#define GPIOILEVEL 0x05000C +#define GPIOISTAT 0x050010 +#define GPIONMIEN 0x050014 +#define IMASK6 0x038038 +#define LO_WPX (1 << 0) +#define LO_ALE (1 << 1) +#define LO_CLE (1 << 2) +#define LO_CEX (1 << 3) +#define LO_FOFF (1 << 5) +#define LO_SPICS (1 << 6) +#define LO_ULED (1 << 7) + +#define BIT_TO_MASK(x) (1 << x) + +struct dev_reg { + u32 base; + u32 mask; + u32 ctl; + u32 timing; +}; + +struct korina_device { + char *name; + unsigned char mac[6]; + struct net_device *dev; +}; + +struct cf_device { + int gpio_pin; + void *dev; + struct gendisk *gd; +}; + +struct mpmc_device { + unsigned char state; + spinlock_t lock; + void __iomem *base; +}; + +#endif /* __ASM_RC32434_RB_H */ diff --git a/arch/mips/include/asm/mach-rc32434/rc32434.h b/arch/mips/include/asm/mach-rc32434/rc32434.h new file mode 100644 index 000000000000..fce25d4231fc --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/rc32434.h @@ -0,0 +1,19 @@ +/* + * Definitions for IDT RC323434 CPU. + */ + +#ifndef _ASM_RC32434_RC32434_H_ +#define _ASM_RC32434_RC32434_H_ + +#include <linux/delay.h> +#include <linux/io.h> + +#define IDT_CLOCK_MULT 2 + +/* cpu pipeline flush */ +static inline void rc32434_sync(void) +{ + __asm__ volatile ("sync"); +} + +#endif /* _ASM_RC32434_RC32434_H_ */ diff --git a/arch/mips/include/asm/mach-rc32434/timer.h b/arch/mips/include/asm/mach-rc32434/timer.h new file mode 100644 index 000000000000..e49b1d57a017 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/timer.h @@ -0,0 +1,65 @@ +/* + * Definitions for timer registers + * + * Copyright 2004 Philip Rischel <rischelp@idt.com> + * Copyright 2008 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __ASM_RC32434_TIMER_H +#define __ASM_RC32434_TIMER_H + +#include <asm/mach-rc32434/rb.h> + +#define TIMER0_BASE_ADDR 0x18028000 +#define TIMER_COUNT 3 + +struct timer_counter { + u32 count; + u32 compare; + u32 ctc; /*use CTC_ */ +}; + +struct timer { + struct timer_counter tim[TIMER_COUNT]; + u32 rcount; /* use RCOUNT_ */ + u32 rcompare; /* use RCOMPARE_ */ + u32 rtc; /* use RTC_ */ +}; + +#define RC32434_CTC_EN_BIT 0 +#define RC32434_CTC_TO_BIT 1 + +/* Real time clock registers */ +#define RC32434_RTC_MSK(x) BIT_TO_MASK(x) +#define RC32434_RTC_CE_BIT 0 +#define RC32434_RTC_TO_BIT 1 +#define RC32434_RTC_RQE_BIT 2 + +/* Counter registers */ +#define RC32434_RCOUNT_BIT 0 +#define RC32434_RCOUNT_MSK 0x0000ffff +#define RC32434_RCOMP_BIT 0 +#define RC32434_RCOMP_MSK 0x0000ffff + +#endif /* __ASM_RC32434_TIMER_H */ diff --git a/arch/mips/include/asm/mach-rc32434/war.h b/arch/mips/include/asm/mach-rc32434/war.h new file mode 100644 index 000000000000..3ddf187e98a6 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_MIPS_WAR_H +#define __ASM_MIPS_MACH_MIPS_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 1 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */ diff --git a/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h new file mode 100644 index 000000000000..ccf543363537 --- /dev/null +++ b/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h @@ -0,0 +1,43 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org) + * + * SNI RM200 C apparently was only shipped with R4600 V2.0 and R5000 processors. + */ +#ifndef __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H + +#include <cpu-feature-overrides.h> + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +#define cpu_has_fpu 1 +#define cpu_has_32fpr 1 +#define cpu_has_counter 1 +#define cpu_has_watch 0 +#define cpu_has_mips16 0 +#define cpu_has_divec 0 +#define cpu_has_cache_cdex_p 1 +#define cpu_has_prefetch 0 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000) +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-rm/mc146818rtc.h b/arch/mips/include/asm/mach-rm/mc146818rtc.h new file mode 100644 index 000000000000..145bce096fe9 --- /dev/null +++ b/arch/mips/include/asm/mach-rm/mc146818rtc.h @@ -0,0 +1,21 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004 by Ralf Baechle + * + * RTC routines for PC style attached Dallas chip with ARC epoch. + */ +#ifndef __ASM_MACH_RM_MC146818RTC_H +#define __ASM_MACH_RM_MC146818RTC_H + +#ifdef CONFIG_CPU_BIG_ENDIAN +#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900) +#else +#define mc146818_decode_year(year) ((year) + 1980) +#endif + +#include_next <mc146818rtc.h> + +#endif /* __ASM_MACH_RM_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-rm/war.h b/arch/mips/include/asm/mach-rm/war.h new file mode 100644 index 000000000000..948d3129a114 --- /dev/null +++ b/arch/mips/include/asm/mach-rm/war.h @@ -0,0 +1,29 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_RM_WAR_H +#define __ASM_MIPS_MACH_RM_WAR_H + +/* + * The RM200C seems to have been shipped only with V2.0 R4600s + */ + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 1 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_RM_WAR_H */ diff --git a/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h new file mode 100644 index 000000000000..1c1f92415b9a --- /dev/null +++ b/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h @@ -0,0 +1,47 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H + +/* + * Sibyte are MIPS64 processors wired to a specific configuration + */ +#define cpu_has_watch 1 +#define cpu_has_mips16 0 +#define cpu_has_divec 1 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 1 +#define cpu_has_ejtag 1 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 1 +#define cpu_has_dc_aliases 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 +#define cpu_icache_snoops_remote_store 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 1 +#define cpu_has_mips64r2 0 + +#define cpu_has_inclusive_pcaches 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 +#define cpu_scache_line_size() 32 + +#endif /* __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-sibyte/war.h b/arch/mips/include/asm/mach-sibyte/war.h new file mode 100644 index 000000000000..7950ef4f032c --- /dev/null +++ b/arch/mips/include/asm/mach-sibyte/war.h @@ -0,0 +1,37 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_SIBYTE_WAR_H +#define __ASM_MIPS_MACH_SIBYTE_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 + +#if defined(CONFIG_SB1_PASS_1_WORKAROUNDS) || \ + defined(CONFIG_SB1_PASS_2_WORKAROUNDS) + +#define BCM1250_M3_WAR 1 +#define SIBYTE_1956_WAR 1 + +#else + +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 + +#endif + +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_SIBYTE_WAR_H */ diff --git a/arch/mips/include/asm/mach-tx39xx/ioremap.h b/arch/mips/include/asm/mach-tx39xx/ioremap.h new file mode 100644 index 000000000000..93c6c04ffda3 --- /dev/null +++ b/arch/mips/include/asm/mach-tx39xx/ioremap.h @@ -0,0 +1,38 @@ +/* + * include/asm-mips/mach-tx39xx/ioremap.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MACH_TX39XX_IOREMAP_H +#define __ASM_MACH_TX39XX_IOREMAP_H + +#include <linux/types.h> + +/* + * Allow physical addresses to be fixed up to help peripherals located + * outside the low 32-bit range -- generic pass-through version. + */ +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ +#define TXX9_DIRECTMAP_BASE 0xff000000ul + if (offset >= TXX9_DIRECTMAP_BASE && + offset < TXX9_DIRECTMAP_BASE + 0xff0000) + return (void __iomem *)offset; + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return (unsigned long)addr >= TXX9_DIRECTMAP_BASE; +} + +#endif /* __ASM_MACH_TX39XX_IOREMAP_H */ diff --git a/arch/mips/include/asm/mach-tx39xx/mangle-port.h b/arch/mips/include/asm/mach-tx39xx/mangle-port.h new file mode 100644 index 000000000000..ef0b502fd8b7 --- /dev/null +++ b/arch/mips/include/asm/mach-tx39xx/mangle-port.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MACH_TX39XX_MANGLE_PORT_H +#define __ASM_MACH_TX39XX_MANGLE_PORT_H + +#if defined(CONFIG_TOSHIBA_JMR3927) +extern unsigned long (*__swizzle_addr_b)(unsigned long port); +#define NEEDS_TXX9_SWIZZLE_ADDR_B +#else +#define __swizzle_addr_b(port) (port) +#endif +#define __swizzle_addr_w(port) (port) +#define __swizzle_addr_l(port) (port) +#define __swizzle_addr_q(port) (port) + +#define ioswabb(a, x) (x) +#define __mem_ioswabb(a, x) (x) +#define ioswabw(a, x) le16_to_cpu(x) +#define __mem_ioswabw(a, x) (x) +#define ioswabl(a, x) le32_to_cpu(x) +#define __mem_ioswabl(a, x) (x) +#define ioswabq(a, x) le64_to_cpu(x) +#define __mem_ioswabq(a, x) (x) + +#endif /* __ASM_MACH_TX39XX_MANGLE_PORT_H */ diff --git a/arch/mips/include/asm/mach-tx39xx/war.h b/arch/mips/include/asm/mach-tx39xx/war.h new file mode 100644 index 000000000000..433814616359 --- /dev/null +++ b/arch/mips/include/asm/mach-tx39xx/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_TX39XX_WAR_H +#define __ASM_MIPS_MACH_TX39XX_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_TX39XX_WAR_H */ diff --git a/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h new file mode 100644 index 000000000000..275eaf92c748 --- /dev/null +++ b/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_llsc 1 +#define cpu_has_64bits 1 +#define cpu_has_inclusive_pcaches 0 + +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 +#define cpu_has_vtag_icache 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-tx49xx/ioremap.h b/arch/mips/include/asm/mach-tx49xx/ioremap.h new file mode 100644 index 000000000000..1e7beae72229 --- /dev/null +++ b/arch/mips/include/asm/mach-tx49xx/ioremap.h @@ -0,0 +1,43 @@ +/* + * include/asm-mips/mach-tx49xx/ioremap.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MACH_TX49XX_IOREMAP_H +#define __ASM_MACH_TX49XX_IOREMAP_H + +#include <linux/types.h> + +/* + * Allow physical addresses to be fixed up to help peripherals located + * outside the low 32-bit range -- generic pass-through version. + */ +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ +#ifdef CONFIG_64BIT +#define TXX9_DIRECTMAP_BASE 0xfff000000ul +#else +#define TXX9_DIRECTMAP_BASE 0xff000000ul +#endif + if (offset >= TXX9_DIRECTMAP_BASE && + offset < TXX9_DIRECTMAP_BASE + 0x400000) + return (void __iomem *)(unsigned long)(int)offset; + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return (unsigned long)addr >= + (unsigned long)(int)(TXX9_DIRECTMAP_BASE & 0xffffffff); +} + +#endif /* __ASM_MACH_TX49XX_IOREMAP_H */ diff --git a/arch/mips/include/asm/mach-tx49xx/kmalloc.h b/arch/mips/include/asm/mach-tx49xx/kmalloc.h new file mode 100644 index 000000000000..913ff196259d --- /dev/null +++ b/arch/mips/include/asm/mach-tx49xx/kmalloc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_MACH_TX49XX_KMALLOC_H +#define __ASM_MACH_TX49XX_KMALLOC_H + +/* + * All happy, no need to define ARCH_KMALLOC_MINALIGN + */ + +#endif /* __ASM_MACH_TX49XX_KMALLOC_H */ diff --git a/arch/mips/include/asm/mach-tx49xx/war.h b/arch/mips/include/asm/mach-tx49xx/war.h new file mode 100644 index 000000000000..39b5d1177c57 --- /dev/null +++ b/arch/mips/include/asm/mach-tx49xx/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_TX49XX_WAR_H +#define __ASM_MIPS_MACH_TX49XX_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 1 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_TX49XX_WAR_H */ diff --git a/arch/mips/include/asm/mach-vr41xx/irq.h b/arch/mips/include/asm/mach-vr41xx/irq.h new file mode 100644 index 000000000000..862058d3f81b --- /dev/null +++ b/arch/mips/include/asm/mach-vr41xx/irq.h @@ -0,0 +1,8 @@ +#ifndef __ASM_MACH_VR41XX_IRQ_H +#define __ASM_MACH_VR41XX_IRQ_H + +#include <asm/vr41xx/irq.h> /* for MIPS_CPU_IRQ_BASE */ + +#include_next <irq.h> + +#endif /* __ASM_MACH_VR41XX_IRQ_H */ diff --git a/arch/mips/include/asm/mach-vr41xx/war.h b/arch/mips/include/asm/mach-vr41xx/war.h new file mode 100644 index 000000000000..56a38926412a --- /dev/null +++ b/arch/mips/include/asm/mach-vr41xx/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_VR41XX_WAR_H +#define __ASM_MIPS_MACH_VR41XX_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_VR41XX_WAR_H */ diff --git a/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h b/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h new file mode 100644 index 000000000000..83746b84a5ec --- /dev/null +++ b/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h @@ -0,0 +1,83 @@ +/* + * This is a direct copy of the ev96100.h file, with a global + * search and replace. The numbers are the same. + * + * The reason I'm duplicating this is so that the 64120/96100 + * defines won't be confusing in the source code. + */ +#ifndef __ASM_MIPS_GT64120_H +#define __ASM_MIPS_GT64120_H + +/* + * This is the CPU physical memory map of PPMC Board: + * + * 0x00000000-0x03FFFFFF - 64MB SDRAM (SCS[0]#) + * 0x1C000000-0x1C000000 - LED (CS0) + * 0x1C800000-0x1C800007 - UART 16550 port (CS1) + * 0x1F000000-0x1F000000 - MailBox (CS3) + * 0x1FC00000-0x20000000 - 4MB Flash (BOOT CS) + */ + +#define WRPPMC_SDRAM_SCS0_BASE 0x00000000 +#define WRPPMC_SDRAM_SCS0_SIZE 0x04000000 + +#define WRPPMC_UART16550_BASE 0x1C800000 +#define WRPPMC_UART16550_CLOCK 3686400 /* 3.68MHZ */ + +#define WRPPMC_LED_BASE 0x1C000000 +#define WRPPMC_MBOX_BASE 0x1F000000 + +#define WRPPMC_BOOTROM_BASE 0x1FC00000 +#define WRPPMC_BOOTROM_SIZE 0x00400000 /* 4M Flash */ + +#define WRPPMC_MIPS_TIMER_IRQ 7 /* MIPS compare/count timer interrupt */ +#define WRPPMC_UART16550_IRQ 6 +#define WRPPMC_PCI_INTA_IRQ 3 + +/* + * PCI Bus I/O and Memory resources allocation + * + * NOTE: We only have PCI_0 hose interface + */ +#define GT_PCI_MEM_BASE 0x13000000UL +#define GT_PCI_MEM_SIZE 0x02000000UL +#define GT_PCI_IO_BASE 0x11000000UL +#define GT_PCI_IO_SIZE 0x02000000UL + +/* + * PCI interrupts will come in on either the INTA or INTD interrupt lines, + * which are mapped to the #2 and #5 interrupt pins of the MIPS. On our + * boards, they all either come in on IntD or they all come in on IntA, they + * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the + * "requested" interrupt numbers and go through the list whenever we get an + * IntA/D. + * + * Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and + * INTD is 11. + */ +#define GT_TIMER 4 +#define GT_INTA 2 +#define GT_INTD 5 + +#ifndef __ASSEMBLY__ + +/* + * GT64120 internal register space base address + */ +extern unsigned long gt64120_base; + +#define GT64120_BASE (gt64120_base) + +/* define WRPPMC_EARLY_DEBUG to enable early output something to UART */ +#undef WRPPMC_EARLY_DEBUG + +#ifdef WRPPMC_EARLY_DEBUG +extern void wrppmc_led_on(int mask); +extern void wrppmc_led_off(int mask); +extern void wrppmc_early_printk(const char *fmt, ...); +#else +#define wrppmc_early_printk(fmt, ...) do {} while (0) +#endif /* WRPPMC_EARLY_DEBUG */ + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_MIPS_GT64120_H */ diff --git a/arch/mips/include/asm/mach-wrppmc/war.h b/arch/mips/include/asm/mach-wrppmc/war.h new file mode 100644 index 000000000000..ac48629bb1ce --- /dev/null +++ b/arch/mips/include/asm/mach-wrppmc/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_WRPPMC_WAR_H +#define __ASM_MIPS_MACH_WRPPMC_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 1 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_WRPPMC_WAR_H */ diff --git a/arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h b/arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h new file mode 100644 index 000000000000..470e5e9e10d6 --- /dev/null +++ b/arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h @@ -0,0 +1,47 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H + +/* + * Momentum Jaguar ATX always has the RM9000 processor. + */ +#define cpu_has_watch 1 +#define cpu_has_mips16 0 +#define cpu_has_divec 0 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 +#define cpu_icache_snoops_remote_store 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_inclusive_pcaches 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 +#define cpu_scache_line_size() 32 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-yosemite/war.h b/arch/mips/include/asm/mach-yosemite/war.h new file mode 100644 index 000000000000..e5c6d53efc86 --- /dev/null +++ b/arch/mips/include/asm/mach-yosemite/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_YOSEMITE_WAR_H +#define __ASM_MIPS_MACH_YOSEMITE_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 1 +#define ICACHE_REFILLS_WORKAROUND_WAR 1 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_YOSEMITE_WAR_H */ diff --git a/arch/mips/include/asm/mc146818-time.h b/arch/mips/include/asm/mc146818-time.h new file mode 100644 index 000000000000..cdc379a0a94e --- /dev/null +++ b/arch/mips/include/asm/mc146818-time.h @@ -0,0 +1,119 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Machine dependent access functions for RTC registers. + */ +#ifndef __ASM_MC146818_TIME_H +#define __ASM_MC146818_TIME_H + +#include <linux/bcd.h> +#include <linux/mc146818rtc.h> +#include <linux/time.h> + +/* + * For check timing call set_rtc_mmss() 500ms; used in timer interrupt. + */ +#define USEC_AFTER 500000 +#define USEC_BEFORE 500000 + +/* + * In order to set the CMOS clock precisely, set_rtc_mmss has to be + * called 500 ms after the second nowtime has started, because when + * nowtime is written into the registers of the CMOS clock, it will + * jump to the next second precisely 500 ms later. Check the Motorola + * MC146818A or Dallas DS12887 data sheet for details. + * + * BUG: This routine does not handle hour overflow properly; it just + * sets the minutes. Usually you'll only notice that after reboot! + */ +static inline int mc146818_set_rtc_mmss(unsigned long nowtime) +{ + int real_seconds, real_minutes, cmos_minutes; + unsigned char save_control, save_freq_select; + int retval = 0; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ + CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); + + save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */ + CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + + cmos_minutes = CMOS_READ(RTC_MINUTES); + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) + BCD_TO_BIN(cmos_minutes); + + /* + * since we're only adjusting minutes and seconds, + * don't interfere with hour overflow. This avoids + * messing with unknown time zones but requires your + * RTC not to be off by more than 15 minutes + */ + real_seconds = nowtime % 60; + real_minutes = nowtime / 60; + if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) + real_minutes += 30; /* correct for half hour time zone */ + real_minutes %= 60; + + if (abs(real_minutes - cmos_minutes) < 30) { + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + BIN_TO_BCD(real_seconds); + BIN_TO_BCD(real_minutes); + } + CMOS_WRITE(real_seconds, RTC_SECONDS); + CMOS_WRITE(real_minutes, RTC_MINUTES); + } else { + printk(KERN_WARNING + "set_rtc_mmss: can't update from %d to %d\n", + cmos_minutes, real_minutes); + retval = -1; + } + + /* The following flags have to be released exactly in this order, + * otherwise the DS12887 (popular MC146818A clone with integrated + * battery and quartz) will not reset the oscillator and will not + * update precisely 500 ms later. You won't find this mentioned in + * the Dallas Semiconductor data sheets, but who believes data + * sheets anyway ... -- Markus Kuhn + */ + CMOS_WRITE(save_control, RTC_CONTROL); + CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + spin_unlock_irqrestore(&rtc_lock, flags); + + return retval; +} + +static inline unsigned long mc146818_get_cmos_time(void) +{ + unsigned int year, mon, day, hour, min, sec; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + + do { + sec = CMOS_READ(RTC_SECONDS); + min = CMOS_READ(RTC_MINUTES); + hour = CMOS_READ(RTC_HOURS); + day = CMOS_READ(RTC_DAY_OF_MONTH); + mon = CMOS_READ(RTC_MONTH); + year = CMOS_READ(RTC_YEAR); + } while (sec != CMOS_READ(RTC_SECONDS)); + + if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + BCD_TO_BIN(sec); + BCD_TO_BIN(min); + BCD_TO_BIN(hour); + BCD_TO_BIN(day); + BCD_TO_BIN(mon); + BCD_TO_BIN(year); + } + spin_unlock_irqrestore(&rtc_lock, flags); + year = mc146818_decode_year(year); + + return mktime(year, mon, day, hour, min, sec); +} + +#endif /* __ASM_MC146818_TIME_H */ diff --git a/arch/mips/include/asm/mc146818rtc.h b/arch/mips/include/asm/mc146818rtc.h new file mode 100644 index 000000000000..68b4da6d520b --- /dev/null +++ b/arch/mips/include/asm/mc146818rtc.h @@ -0,0 +1,16 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Machine dependent access functions for RTC registers. + * + * Copyright (C) 1996, 1997, 1998, 2000 Ralf Baechle + * Copyright (C) 2002 Maciej W. Rozycki + */ +#ifndef _ASM_MC146818RTC_H +#define _ASM_MC146818RTC_H + +#include <mc146818rtc.h> + +#endif /* _ASM_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h new file mode 100644 index 000000000000..a0f04bb99c99 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/bonito64.h @@ -0,0 +1,436 @@ +/* + * Bonito Register Map + * + * This file is the original bonito.h from Algorithmics with minor changes + * to fit into linux. + * + * Copyright (c) 1999 Algorithmics Ltd + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2001 MIPS Technologies, Inc. All rights reserved. + * + * Algorithmics gives permission for anyone to use and modify this file + * without any obligation or license condition except that you retain + * this copyright message in any source redistribution in whole or part. + * + */ + +/* Revision 1.48 autogenerated on 08/17/99 15:20:01 */ +/* This bonito64 version editted from bonito.h Revision 1.48 on 11/09/00 */ + +#ifndef _ASM_MIPS_BOARDS_BONITO64_H +#define _ASM_MIPS_BOARDS_BONITO64_H + +#ifdef __ASSEMBLY__ + +/* offsets from base register */ +#define BONITO(x) (x) + +#elif defined(CONFIG_LEMOTE_FULONG) + +#define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x))) +#define BONITO_IRQ_BASE 32 + +#else + +/* + * Algorithmics Bonito64 system controller register base. + */ +extern unsigned long _pcictrl_bonito; +extern unsigned long _pcictrl_bonito_pcicfg; + +#define BONITO(x) *(volatile u32 *)(_pcictrl_bonito + (x)) + +#endif /* __ASSEMBLY__ */ + + +#define BONITO_BOOT_BASE 0x1fc00000 +#define BONITO_BOOT_SIZE 0x00100000 +#define BONITO_BOOT_TOP (BONITO_BOOT_BASE+BONITO_BOOT_SIZE-1) +#define BONITO_FLASH_BASE 0x1c000000 +#define BONITO_FLASH_SIZE 0x03000000 +#define BONITO_FLASH_TOP (BONITO_FLASH_BASE+BONITO_FLASH_SIZE-1) +#define BONITO_SOCKET_BASE 0x1f800000 +#define BONITO_SOCKET_SIZE 0x00400000 +#define BONITO_SOCKET_TOP (BONITO_SOCKET_BASE+BONITO_SOCKET_SIZE-1) +#define BONITO_REG_BASE 0x1fe00000 +#define BONITO_REG_SIZE 0x00040000 +#define BONITO_REG_TOP (BONITO_REG_BASE+BONITO_REG_SIZE-1) +#define BONITO_DEV_BASE 0x1ff00000 +#define BONITO_DEV_SIZE 0x00100000 +#define BONITO_DEV_TOP (BONITO_DEV_BASE+BONITO_DEV_SIZE-1) +#define BONITO_PCILO_BASE 0x10000000 +#define BONITO_PCILO_SIZE 0x0c000000 +#define BONITO_PCILO_TOP (BONITO_PCILO_BASE+BONITO_PCILO_SIZE-1) +#define BONITO_PCILO0_BASE 0x10000000 +#define BONITO_PCILO1_BASE 0x14000000 +#define BONITO_PCILO2_BASE 0x18000000 +#define BONITO_PCIHI_BASE 0x20000000 +#define BONITO_PCIHI_SIZE 0x20000000 +#define BONITO_PCIHI_TOP (BONITO_PCIHI_BASE+BONITO_PCIHI_SIZE-1) +#define BONITO_PCIIO_BASE 0x1fd00000 +#define BONITO_PCIIO_SIZE 0x00100000 +#define BONITO_PCIIO_TOP (BONITO_PCIIO_BASE+BONITO_PCIIO_SIZE-1) +#define BONITO_PCICFG_BASE 0x1fe80000 +#define BONITO_PCICFG_SIZE 0x00080000 +#define BONITO_PCICFG_TOP (BONITO_PCICFG_BASE+BONITO_PCICFG_SIZE-1) + + +/* Bonito Register Bases */ + +#define BONITO_PCICONFIGBASE 0x00 +#define BONITO_REGBASE 0x100 + + +/* PCI Configuration Registers */ + +#define BONITO_PCI_REG(x) BONITO(BONITO_PCICONFIGBASE + (x)) +#define BONITO_PCIDID BONITO_PCI_REG(0x00) +#define BONITO_PCICMD BONITO_PCI_REG(0x04) +#define BONITO_PCICLASS BONITO_PCI_REG(0x08) +#define BONITO_PCILTIMER BONITO_PCI_REG(0x0c) +#define BONITO_PCIBASE0 BONITO_PCI_REG(0x10) +#define BONITO_PCIBASE1 BONITO_PCI_REG(0x14) +#define BONITO_PCIBASE2 BONITO_PCI_REG(0x18) +#define BONITO_PCIEXPRBASE BONITO_PCI_REG(0x30) +#define BONITO_PCIINT BONITO_PCI_REG(0x3c) + +#define BONITO_PCICMD_PERR_CLR 0x80000000 +#define BONITO_PCICMD_SERR_CLR 0x40000000 +#define BONITO_PCICMD_MABORT_CLR 0x20000000 +#define BONITO_PCICMD_MTABORT_CLR 0x10000000 +#define BONITO_PCICMD_TABORT_CLR 0x08000000 +#define BONITO_PCICMD_MPERR_CLR 0x01000000 +#define BONITO_PCICMD_PERRRESPEN 0x00000040 +#define BONITO_PCICMD_ASTEPEN 0x00000080 +#define BONITO_PCICMD_SERREN 0x00000100 +#define BONITO_PCILTIMER_BUSLATENCY 0x0000ff00 +#define BONITO_PCILTIMER_BUSLATENCY_SHIFT 8 + + + + +/* 1. Bonito h/w Configuration */ +/* Power on register */ + +#define BONITO_BONPONCFG BONITO(BONITO_REGBASE + 0x00) + +#define BONITO_BONPONCFG_SYSCONTROLLERRD 0x00040000 +#define BONITO_BONPONCFG_ROMCS1SAMP 0x00020000 +#define BONITO_BONPONCFG_ROMCS0SAMP 0x00010000 +#define BONITO_BONPONCFG_CPUBIGEND 0x00004000 +/* Added by RPF 11-9-00 */ +#define BONITO_BONPONCFG_BURSTORDER 0x00001000 +/* --- */ +#define BONITO_BONPONCFG_CPUPARITY 0x00002000 +#define BONITO_BONPONCFG_CPUTYPE 0x00000007 +#define BONITO_BONPONCFG_CPUTYPE_SHIFT 0 +#define BONITO_BONPONCFG_PCIRESET_OUT 0x00000008 +#define BONITO_BONPONCFG_IS_ARBITER 0x00000010 +#define BONITO_BONPONCFG_ROMBOOT 0x000000c0 +#define BONITO_BONPONCFG_ROMBOOT_SHIFT 6 + +#define BONITO_BONPONCFG_ROMBOOT_FLASH (0x0<<BONITO_BONPONCFG_ROMBOOT_SHIFT) +#define BONITO_BONPONCFG_ROMBOOT_SOCKET (0x1<<BONITO_BONPONCFG_ROMBOOT_SHIFT) +#define BONITO_BONPONCFG_ROMBOOT_SDRAM (0x2<<BONITO_BONPONCFG_ROMBOOT_SHIFT) +#define BONITO_BONPONCFG_ROMBOOT_CPURESET (0x3<<BONITO_BONPONCFG_ROMBOOT_SHIFT) + +#define BONITO_BONPONCFG_ROMCS0WIDTH 0x00000100 +#define BONITO_BONPONCFG_ROMCS1WIDTH 0x00000200 +#define BONITO_BONPONCFG_ROMCS0FAST 0x00000400 +#define BONITO_BONPONCFG_ROMCS1FAST 0x00000800 +#define BONITO_BONPONCFG_CONFIG_DIS 0x00000020 + + +/* Other Bonito configuration */ + +#define BONITO_BONGENCFG_OFFSET 0x4 +#define BONITO_BONGENCFG BONITO(BONITO_REGBASE + BONITO_BONGENCFG_OFFSET) + +#define BONITO_BONGENCFG_DEBUGMODE 0x00000001 +#define BONITO_BONGENCFG_SNOOPEN 0x00000002 +#define BONITO_BONGENCFG_CPUSELFRESET 0x00000004 + +#define BONITO_BONGENCFG_FORCE_IRQA 0x00000008 +#define BONITO_BONGENCFG_IRQA_ISOUT 0x00000010 +#define BONITO_BONGENCFG_IRQA_FROM_INT1 0x00000020 +#define BONITO_BONGENCFG_BYTESWAP 0x00000040 + +#define BONITO_BONGENCFG_UNCACHED 0x00000080 +#define BONITO_BONGENCFG_PREFETCHEN 0x00000100 +#define BONITO_BONGENCFG_WBEHINDEN 0x00000200 +#define BONITO_BONGENCFG_CACHEALG 0x00000c00 +#define BONITO_BONGENCFG_CACHEALG_SHIFT 10 +#define BONITO_BONGENCFG_PCIQUEUE 0x00001000 +#define BONITO_BONGENCFG_CACHESTOP 0x00002000 +#define BONITO_BONGENCFG_MSTRBYTESWAP 0x00004000 +#define BONITO_BONGENCFG_BUSERREN 0x00008000 +#define BONITO_BONGENCFG_NORETRYTIMEOUT 0x00010000 +#define BONITO_BONGENCFG_SHORTCOPYTIMEOUT 0x00020000 + +/* 2. IO & IDE configuration */ + +#define BONITO_IODEVCFG BONITO(BONITO_REGBASE + 0x08) + +/* 3. IO & IDE configuration */ + +#define BONITO_SDCFG BONITO(BONITO_REGBASE + 0x0c) + +/* 4. PCI address map control */ + +#define BONITO_PCIMAP BONITO(BONITO_REGBASE + 0x10) +#define BONITO_PCIMEMBASECFG BONITO(BONITO_REGBASE + 0x14) +#define BONITO_PCIMAP_CFG BONITO(BONITO_REGBASE + 0x18) + +/* 5. ICU & GPIO regs */ + +/* GPIO Regs - r/w */ + +#define BONITO_GPIODATA_OFFSET 0x1c +#define BONITO_GPIODATA BONITO(BONITO_REGBASE + BONITO_GPIODATA_OFFSET) +#define BONITO_GPIOIE BONITO(BONITO_REGBASE + 0x20) + +/* ICU Configuration Regs - r/w */ + +#define BONITO_INTEDGE BONITO(BONITO_REGBASE + 0x24) +#define BONITO_INTSTEER BONITO(BONITO_REGBASE + 0x28) +#define BONITO_INTPOL BONITO(BONITO_REGBASE + 0x2c) + +/* ICU Enable Regs - IntEn & IntISR are r/o. */ + +#define BONITO_INTENSET BONITO(BONITO_REGBASE + 0x30) +#define BONITO_INTENCLR BONITO(BONITO_REGBASE + 0x34) +#define BONITO_INTEN BONITO(BONITO_REGBASE + 0x38) +#define BONITO_INTISR BONITO(BONITO_REGBASE + 0x3c) + +/* PCI mail boxes */ + +#define BONITO_PCIMAIL0_OFFSET 0x40 +#define BONITO_PCIMAIL1_OFFSET 0x44 +#define BONITO_PCIMAIL2_OFFSET 0x48 +#define BONITO_PCIMAIL3_OFFSET 0x4c +#define BONITO_PCIMAIL0 BONITO(BONITO_REGBASE + 0x40) +#define BONITO_PCIMAIL1 BONITO(BONITO_REGBASE + 0x44) +#define BONITO_PCIMAIL2 BONITO(BONITO_REGBASE + 0x48) +#define BONITO_PCIMAIL3 BONITO(BONITO_REGBASE + 0x4c) + + +/* 6. PCI cache */ + +#define BONITO_PCICACHECTRL BONITO(BONITO_REGBASE + 0x50) +#define BONITO_PCICACHETAG BONITO(BONITO_REGBASE + 0x54) + +#define BONITO_PCIBADADDR BONITO(BONITO_REGBASE + 0x58) +#define BONITO_PCIMSTAT BONITO(BONITO_REGBASE + 0x5c) + + +/* +#define BONITO_PCIRDPOST BONITO(BONITO_REGBASE + 0x60) +#define BONITO_PCIDATA BONITO(BONITO_REGBASE + 0x64) +*/ + +/* 7. IDE DMA & Copier */ + +#define BONITO_CONFIGBASE 0x000 +#define BONITO_BONITOBASE 0x100 +#define BONITO_LDMABASE 0x200 +#define BONITO_COPBASE 0x300 +#define BONITO_REG_BLOCKMASK 0x300 + +#define BONITO_LDMACTRL BONITO(BONITO_LDMABASE + 0x0) +#define BONITO_LDMASTAT BONITO(BONITO_LDMABASE + 0x0) +#define BONITO_LDMAADDR BONITO(BONITO_LDMABASE + 0x4) +#define BONITO_LDMAGO BONITO(BONITO_LDMABASE + 0x8) +#define BONITO_LDMADATA BONITO(BONITO_LDMABASE + 0xc) + +#define BONITO_COPCTRL BONITO(BONITO_COPBASE + 0x0) +#define BONITO_COPSTAT BONITO(BONITO_COPBASE + 0x0) +#define BONITO_COPPADDR BONITO(BONITO_COPBASE + 0x4) +#define BONITO_COPDADDR BONITO(BONITO_COPBASE + 0x8) +#define BONITO_COPGO BONITO(BONITO_COPBASE + 0xc) + + +/* ###### Bit Definitions for individual Registers #### */ + +/* Gen DMA. */ + +#define BONITO_IDECOPDADDR_DMA_DADDR 0x0ffffffc +#define BONITO_IDECOPDADDR_DMA_DADDR_SHIFT 2 +#define BONITO_IDECOPPADDR_DMA_PADDR 0xfffffffc +#define BONITO_IDECOPPADDR_DMA_PADDR_SHIFT 2 +#define BONITO_IDECOPGO_DMA_SIZE 0x0000fffe +#define BONITO_IDECOPGO_DMA_SIZE_SHIFT 0 +#define BONITO_IDECOPGO_DMA_WRITE 0x00010000 +#define BONITO_IDECOPGO_DMAWCOUNT 0x000f0000 +#define BONITO_IDECOPGO_DMAWCOUNT_SHIFT 16 + +#define BONITO_IDECOPCTRL_DMA_STARTBIT 0x80000000 +#define BONITO_IDECOPCTRL_DMA_RSTBIT 0x40000000 + +/* DRAM - sdCfg */ + +#define BONITO_SDCFG_AROWBITS 0x00000003 +#define BONITO_SDCFG_AROWBITS_SHIFT 0 +#define BONITO_SDCFG_ACOLBITS 0x0000000c +#define BONITO_SDCFG_ACOLBITS_SHIFT 2 +#define BONITO_SDCFG_ABANKBIT 0x00000010 +#define BONITO_SDCFG_ASIDES 0x00000020 +#define BONITO_SDCFG_AABSENT 0x00000040 +#define BONITO_SDCFG_AWIDTH64 0x00000080 + +#define BONITO_SDCFG_BROWBITS 0x00000300 +#define BONITO_SDCFG_BROWBITS_SHIFT 8 +#define BONITO_SDCFG_BCOLBITS 0x00000c00 +#define BONITO_SDCFG_BCOLBITS_SHIFT 10 +#define BONITO_SDCFG_BBANKBIT 0x00001000 +#define BONITO_SDCFG_BSIDES 0x00002000 +#define BONITO_SDCFG_BABSENT 0x00004000 +#define BONITO_SDCFG_BWIDTH64 0x00008000 + +#define BONITO_SDCFG_EXTRDDATA 0x00010000 +#define BONITO_SDCFG_EXTRASCAS 0x00020000 +#define BONITO_SDCFG_EXTPRECH 0x00040000 +#define BONITO_SDCFG_EXTRASWIDTH 0x00180000 +#define BONITO_SDCFG_EXTRASWIDTH_SHIFT 19 +/* Changed by RPF 11-9-00 */ +#define BONITO_SDCFG_DRAMMODESET 0x00200000 +/* --- */ +#define BONITO_SDCFG_DRAMEXTREGS 0x00400000 +#define BONITO_SDCFG_DRAMPARITY 0x00800000 +/* Added by RPF 11-9-00 */ +#define BONITO_SDCFG_DRAMBURSTLEN 0x03000000 +#define BONITO_SDCFG_DRAMBURSTLEN_SHIFT 24 +#define BONITO_SDCFG_DRAMMODESET_DONE 0x80000000 +/* --- */ + +/* PCI Cache - pciCacheCtrl */ + +#define BONITO_PCICACHECTRL_CACHECMD 0x00000007 +#define BONITO_PCICACHECTRL_CACHECMD_SHIFT 0 +#define BONITO_PCICACHECTRL_CACHECMDLINE 0x00000018 +#define BONITO_PCICACHECTRL_CACHECMDLINE_SHIFT 3 +#define BONITO_PCICACHECTRL_CMDEXEC 0x00000020 + +#define BONITO_PCICACHECTRL_IOBCCOH_PRES 0x00000100 +#define BONITO_PCICACHECTRL_IOBCCOH_EN 0x00000200 +#define BONITO_PCICACHECTRL_CPUCOH_PRES 0x00000400 +#define BONITO_PCICACHECTRL_CPUCOH_EN 0x00000800 + +#define BONITO_IODEVCFG_BUFFBIT_CS0 0x00000001 +#define BONITO_IODEVCFG_SPEEDBIT_CS0 0x00000002 +#define BONITO_IODEVCFG_MOREABITS_CS0 0x00000004 + +#define BONITO_IODEVCFG_BUFFBIT_CS1 0x00000008 +#define BONITO_IODEVCFG_SPEEDBIT_CS1 0x00000010 +#define BONITO_IODEVCFG_MOREABITS_CS1 0x00000020 + +#define BONITO_IODEVCFG_BUFFBIT_CS2 0x00000040 +#define BONITO_IODEVCFG_SPEEDBIT_CS2 0x00000080 +#define BONITO_IODEVCFG_MOREABITS_CS2 0x00000100 + +#define BONITO_IODEVCFG_BUFFBIT_CS3 0x00000200 +#define BONITO_IODEVCFG_SPEEDBIT_CS3 0x00000400 +#define BONITO_IODEVCFG_MOREABITS_CS3 0x00000800 + +#define BONITO_IODEVCFG_BUFFBIT_IDE 0x00001000 +#define BONITO_IODEVCFG_SPEEDBIT_IDE 0x00002000 +#define BONITO_IODEVCFG_WORDSWAPBIT_IDE 0x00004000 +#define BONITO_IODEVCFG_MODEBIT_IDE 0x00008000 +#define BONITO_IODEVCFG_DMAON_IDE 0x001f0000 +#define BONITO_IODEVCFG_DMAON_IDE_SHIFT 16 +#define BONITO_IODEVCFG_DMAOFF_IDE 0x01e00000 +#define BONITO_IODEVCFG_DMAOFF_IDE_SHIFT 21 +#define BONITO_IODEVCFG_EPROMSPLIT 0x02000000 +/* Added by RPF 11-9-00 */ +#define BONITO_IODEVCFG_CPUCLOCKPERIOD 0xfc000000 +#define BONITO_IODEVCFG_CPUCLOCKPERIOD_SHIFT 26 +/* --- */ + +/* gpio */ +#define BONITO_GPIO_GPIOW 0x000003ff +#define BONITO_GPIO_GPIOW_SHIFT 0 +#define BONITO_GPIO_GPIOR 0x01ff0000 +#define BONITO_GPIO_GPIOR_SHIFT 16 +#define BONITO_GPIO_GPINR 0xfe000000 +#define BONITO_GPIO_GPINR_SHIFT 25 +#define BONITO_GPIO_IOW(N) (1<<(BONITO_GPIO_GPIOW_SHIFT+(N))) +#define BONITO_GPIO_IOR(N) (1<<(BONITO_GPIO_GPIOR_SHIFT+(N))) +#define BONITO_GPIO_INR(N) (1<<(BONITO_GPIO_GPINR_SHIFT+(N))) + +/* ICU */ +#define BONITO_ICU_MBOXES 0x0000000f +#define BONITO_ICU_MBOXES_SHIFT 0 +#define BONITO_ICU_DMARDY 0x00000010 +#define BONITO_ICU_DMAEMPTY 0x00000020 +#define BONITO_ICU_COPYRDY 0x00000040 +#define BONITO_ICU_COPYEMPTY 0x00000080 +#define BONITO_ICU_COPYERR 0x00000100 +#define BONITO_ICU_PCIIRQ 0x00000200 +#define BONITO_ICU_MASTERERR 0x00000400 +#define BONITO_ICU_SYSTEMERR 0x00000800 +#define BONITO_ICU_DRAMPERR 0x00001000 +#define BONITO_ICU_RETRYERR 0x00002000 +#define BONITO_ICU_GPIOS 0x01ff0000 +#define BONITO_ICU_GPIOS_SHIFT 16 +#define BONITO_ICU_GPINS 0x7e000000 +#define BONITO_ICU_GPINS_SHIFT 25 +#define BONITO_ICU_MBOX(N) (1<<(BONITO_ICU_MBOXES_SHIFT+(N))) +#define BONITO_ICU_GPIO(N) (1<<(BONITO_ICU_GPIOS_SHIFT+(N))) +#define BONITO_ICU_GPIN(N) (1<<(BONITO_ICU_GPINS_SHIFT+(N))) + +/* pcimap */ + +#define BONITO_PCIMAP_PCIMAP_LO0 0x0000003f +#define BONITO_PCIMAP_PCIMAP_LO0_SHIFT 0 +#define BONITO_PCIMAP_PCIMAP_LO1 0x00000fc0 +#define BONITO_PCIMAP_PCIMAP_LO1_SHIFT 6 +#define BONITO_PCIMAP_PCIMAP_LO2 0x0003f000 +#define BONITO_PCIMAP_PCIMAP_LO2_SHIFT 12 +#define BONITO_PCIMAP_PCIMAP_2 0x00040000 +#define BONITO_PCIMAP_WIN(WIN, ADDR) ((((ADDR)>>26) & BONITO_PCIMAP_PCIMAP_LO0) << ((WIN)*6)) + +#define BONITO_PCIMAP_WINSIZE (1<<26) +#define BONITO_PCIMAP_WINOFFSET(ADDR) ((ADDR) & (BONITO_PCIMAP_WINSIZE - 1)) +#define BONITO_PCIMAP_WINBASE(ADDR) ((ADDR) << 26) + +/* pcimembaseCfg */ + +#define BONITO_PCIMEMBASECFG_MASK 0xf0000000 +#define BONITO_PCIMEMBASECFG_MEMBASE0_MASK 0x0000001f +#define BONITO_PCIMEMBASECFG_MEMBASE0_MASK_SHIFT 0 +#define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS 0x000003e0 +#define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS_SHIFT 5 +#define BONITO_PCIMEMBASECFG_MEMBASE0_CACHED 0x00000400 +#define BONITO_PCIMEMBASECFG_MEMBASE0_IO 0x00000800 + +#define BONITO_PCIMEMBASECFG_MEMBASE1_MASK 0x0001f000 +#define BONITO_PCIMEMBASECFG_MEMBASE1_MASK_SHIFT 12 +#define BONITO_PCIMEMBASECFG_MEMBASE1_TRANS 0x003e0000 +#define BONITO_PCIMEMBASECFG_MEMBASE1_TRANS_SHIFT 17 +#define BONITO_PCIMEMBASECFG_MEMBASE1_CACHED 0x00400000 +#define BONITO_PCIMEMBASECFG_MEMBASE1_IO 0x00800000 + +#define BONITO_PCIMEMBASECFG_ASHIFT 23 +#define BONITO_PCIMEMBASECFG_AMASK 0x007fffff +#define BONITO_PCIMEMBASECFGSIZE(WIN, SIZE) (((~((SIZE)-1))>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) +#define BONITO_PCIMEMBASECFGBASE(WIN, BASE) (((BASE)>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS) + +#define BONITO_PCIMEMBASECFG_SIZE(WIN, CFG) (((((~(CFG)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK)) << (BONITO_PCIMEMBASECFG_ASHIFT - BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) | BONITO_PCIMEMBASECFG_AMASK) + + +#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT) +#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT) +#define BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT) + +#define BONITO_PCITOPHYS(WIN, ADDR, CFG) ( \ + (((ADDR) & (~(BONITO_PCIMEMBASECFG_MASK))) & (~(BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)))) | \ + (BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG)) \ + ) + +/* PCICmd */ + +#define BONITO_PCICMD_MEMEN 0x00000002 +#define BONITO_PCICMD_MSTREN 0x00000004 + + +#endif /* _ASM_MIPS_BOARDS_BONITO64_H */ diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h new file mode 100644 index 000000000000..7f0b034dd9a5 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/generic.h @@ -0,0 +1,104 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Defines of the MIPS boards specific address-MAP, registers, etc. + */ +#ifndef __ASM_MIPS_BOARDS_GENERIC_H +#define __ASM_MIPS_BOARDS_GENERIC_H + +#include <asm/addrspace.h> +#include <asm/byteorder.h> +#include <asm/mips-boards/bonito64.h> + +/* + * Display register base. + */ +#define ASCII_DISPLAY_WORD_BASE 0x1f000410 +#define ASCII_DISPLAY_POS_BASE 0x1f000418 + + +/* + * Yamon Prom print address. + */ +#define YAMON_PROM_PRINT_ADDR 0x1fc00504 + + +/* + * Reset register. + */ +#define SOFTRES_REG 0x1f000500 +#define GORESET 0x42 + +/* + * Revision register. + */ +#define MIPS_REVISION_REG 0x1fc00010 +#define MIPS_REVISION_CORID_QED_RM5261 0 +#define MIPS_REVISION_CORID_CORE_LV 1 +#define MIPS_REVISION_CORID_BONITO64 2 +#define MIPS_REVISION_CORID_CORE_20K 3 +#define MIPS_REVISION_CORID_CORE_FPGA 4 +#define MIPS_REVISION_CORID_CORE_MSC 5 +#define MIPS_REVISION_CORID_CORE_EMUL 6 +#define MIPS_REVISION_CORID_CORE_FPGA2 7 +#define MIPS_REVISION_CORID_CORE_FPGAR2 8 +#define MIPS_REVISION_CORID_CORE_FPGA3 9 +#define MIPS_REVISION_CORID_CORE_24K 10 +#define MIPS_REVISION_CORID_CORE_FPGA4 11 +#define MIPS_REVISION_CORID_CORE_FPGA5 12 + +/**** Artificial corid defines ****/ +/* + * CoreEMUL with Bonito System Controller is treated like a Core20K + * CoreEMUL with SOC-it 101 System Controller is treated like a CoreMSC + */ +#define MIPS_REVISION_CORID_CORE_EMUL_BON -1 +#define MIPS_REVISION_CORID_CORE_EMUL_MSC -2 + +#define MIPS_REVISION_CORID (((*(volatile u32 *)ioremap(MIPS_REVISION_REG, 4)) >> 10) & 0x3f) + +extern int mips_revision_corid; + +#define MIPS_REVISION_SCON_OTHER 0 +#define MIPS_REVISION_SCON_SOCITSC 1 +#define MIPS_REVISION_SCON_SOCITSCP 2 + +/* Artificial SCON defines for MIPS_REVISION_SCON_OTHER */ +#define MIPS_REVISION_SCON_UNKNOWN -1 +#define MIPS_REVISION_SCON_GT64120 -2 +#define MIPS_REVISION_SCON_BONITO -3 +#define MIPS_REVISION_SCON_BRTL -4 +#define MIPS_REVISION_SCON_SOCIT -5 +#define MIPS_REVISION_SCON_ROCIT -6 + +#define MIPS_REVISION_SCONID (((*(volatile u32 *)ioremap(MIPS_REVISION_REG, 4)) >> 24) & 0xff) + +extern int mips_revision_sconid; + +extern void mips_reboot_setup(void); + +#ifdef CONFIG_PCI +extern void mips_pcibios_init(void); +#else +#define mips_pcibios_init() do { } while (0) +#endif + +#ifdef CONFIG_KGDB +extern void kgdb_config(void); +#endif + +#endif /* __ASM_MIPS_BOARDS_GENERIC_H */ diff --git a/arch/mips/include/asm/mips-boards/launch.h b/arch/mips/include/asm/mips-boards/launch.h new file mode 100644 index 000000000000..d8ae7f95a522 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/launch.h @@ -0,0 +1,35 @@ +/* + * + */ + +#ifndef _ASSEMBLER_ + +struct cpulaunch { + unsigned long pc; + unsigned long gp; + unsigned long sp; + unsigned long a0; + unsigned long _pad[3]; /* pad to cache line size to avoid thrashing */ + unsigned long flags; +}; + +#else + +#define LOG2CPULAUNCH 5 +#define LAUNCH_PC 0 +#define LAUNCH_GP 4 +#define LAUNCH_SP 8 +#define LAUNCH_A0 12 +#define LAUNCH_FLAGS 28 + +#endif + +#define LAUNCH_FREADY 1 +#define LAUNCH_FGO 2 +#define LAUNCH_FGONE 4 + +#define CPULAUNCH 0x00000f00 +#define NCPULAUNCH 8 + +/* Polling period in count cycles for secondary CPU's */ +#define LAUNCHPERIOD 10000 diff --git a/arch/mips/include/asm/mips-boards/malta.h b/arch/mips/include/asm/mips-boards/malta.h new file mode 100644 index 000000000000..c1891578fa65 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/malta.h @@ -0,0 +1,102 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Defines of the Malta board specific address-MAP, registers, etc. + */ +#ifndef __ASM_MIPS_BOARDS_MALTA_H +#define __ASM_MIPS_BOARDS_MALTA_H + +#include <asm/addrspace.h> +#include <asm/io.h> +#include <asm/mips-boards/msc01_pci.h> +#include <asm/gt64120.h> + +/* Mips interrupt controller found in SOCit variations */ +#define MIPS_MSC01_IC_REG_BASE 0x1bc40000 +#define MIPS_SOCITSC_IC_REG_BASE 0x1ffa0000 + +/* + * Malta I/O ports base address for the Galileo GT64120 and Algorithmics + * Bonito system controllers. + */ +#define MALTA_GT_PORT_BASE get_gt_port_base(GT_PCI0IOLD_OFS) +#define MALTA_BONITO_PORT_BASE ((unsigned long)ioremap (0x1fd00000, 0x10000)) +#define MALTA_MSC_PORT_BASE get_msc_port_base(MSC01_PCI_SC2PIOBASL) + +static inline unsigned long get_gt_port_base(unsigned long reg) +{ + unsigned long addr; + addr = GT_READ(reg); + return (unsigned long) ioremap (((addr & 0xffff) << 21), 0x10000); +} + +static inline unsigned long get_msc_port_base(unsigned long reg) +{ + unsigned long addr; + MSC_READ(reg, addr); + return (unsigned long) ioremap(addr, 0x10000); +} + +/* + * GCMP Specific definitions + */ +#define GCMP_BASE_ADDR 0x1fbf8000 +#define GCMP_ADDRSPACE_SZ (256 * 1024) + +/* + * GIC Specific definitions + */ +#define GIC_BASE_ADDR 0x1bdc0000 +#define GIC_ADDRSPACE_SZ (128 * 1024) + +/* + * MSC01 BIU Specific definitions + * FIXME : These should be elsewhere ? + */ +#define MSC01_BIU_REG_BASE 0x1bc80000 +#define MSC01_BIU_ADDRSPACE_SZ (256 * 1024) +#define MSC01_SC_CFG_OFS 0x0110 +#define MSC01_SC_CFG_GICPRES_MSK 0x00000004 +#define MSC01_SC_CFG_GICPRES_SHF 2 +#define MSC01_SC_CFG_GICENA_SHF 3 + +/* + * Malta RTC-device indirect register access. + */ +#define MALTA_RTC_ADR_REG 0x70 +#define MALTA_RTC_DAT_REG 0x71 + +/* + * Malta SMSC FDC37M817 Super I/O Controller register. + */ +#define SMSC_CONFIG_REG 0x3f0 +#define SMSC_DATA_REG 0x3f1 + +#define SMSC_CONFIG_DEVNUM 0x7 +#define SMSC_CONFIG_ACTIVATE 0x30 +#define SMSC_CONFIG_ENTER 0x55 +#define SMSC_CONFIG_EXIT 0xaa + +#define SMSC_CONFIG_DEVNUM_FLOPPY 0 + +#define SMSC_CONFIG_ACTIVATE_ENABLE 1 + +#define SMSC_WRITE(x, a) outb(x, a) + +#define MALTA_JMPRS_REG 0x1f000210 + +#endif /* __ASM_MIPS_BOARDS_MALTA_H */ diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h new file mode 100644 index 000000000000..cea872fc6f5c --- /dev/null +++ b/arch/mips/include/asm/mips-boards/maltaint.h @@ -0,0 +1,110 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * Defines for the Malta interrupt controller. + * + */ +#ifndef _MIPS_MALTAINT_H +#define _MIPS_MALTAINT_H + +#include <irq.h> + +/* + * Interrupts 0..15 are used for Malta ISA compatible interrupts + */ +#define MALTA_INT_BASE 0 + +/* CPU interrupt offsets */ +#define MIPSCPU_INT_SW0 0 +#define MIPSCPU_INT_SW1 1 +#define MIPSCPU_INT_MB0 2 +#define MIPSCPU_INT_I8259A MIPSCPU_INT_MB0 +#define MIPSCPU_INT_MB1 3 +#define MIPSCPU_INT_SMI MIPSCPU_INT_MB1 +#define MIPSCPU_INT_IPI0 MIPSCPU_INT_MB1 /* GIC IPI */ +#define MIPSCPU_INT_MB2 4 +#define MIPSCPU_INT_IPI1 MIPSCPU_INT_MB2 /* GIC IPI */ +#define MIPSCPU_INT_MB3 5 +#define MIPSCPU_INT_COREHI MIPSCPU_INT_MB3 +#define MIPSCPU_INT_MB4 6 +#define MIPSCPU_INT_CORELO MIPSCPU_INT_MB4 + +/* + * Interrupts 64..127 are used for Soc-it Classic interrupts + */ +#define MSC01C_INT_BASE 64 + +/* SOC-it Classic interrupt offsets */ +#define MSC01C_INT_TMR 0 +#define MSC01C_INT_PCI 1 + +/* + * Interrupts 64..127 are used for Soc-it EIC interrupts + */ +#define MSC01E_INT_BASE 64 + +/* SOC-it EIC interrupt offsets */ +#define MSC01E_INT_SW0 1 +#define MSC01E_INT_SW1 2 +#define MSC01E_INT_MB0 3 +#define MSC01E_INT_I8259A MSC01E_INT_MB0 +#define MSC01E_INT_MB1 4 +#define MSC01E_INT_SMI MSC01E_INT_MB1 +#define MSC01E_INT_MB2 5 +#define MSC01E_INT_MB3 6 +#define MSC01E_INT_COREHI MSC01E_INT_MB3 +#define MSC01E_INT_MB4 7 +#define MSC01E_INT_CORELO MSC01E_INT_MB4 +#define MSC01E_INT_TMR 8 +#define MSC01E_INT_PCI 9 +#define MSC01E_INT_PERFCTR 10 +#define MSC01E_INT_CPUCTR 11 + +/* GIC's Nomenclature for Core Interrupt Pins on the Malta */ +#define GIC_CPU_INT0 0 /* Core Interrupt 2 */ +#define GIC_CPU_INT1 1 /* . */ +#define GIC_CPU_INT2 2 /* . */ +#define GIC_CPU_INT3 3 /* . */ +#define GIC_CPU_INT4 4 /* . */ +#define GIC_CPU_INT5 5 /* Core Interrupt 5 */ + +#define GIC_EXT_INTR(x) x + +/* Dummy data */ +#define X 0xdead + +/* External Interrupts used for IPI */ +#define GIC_IPI_EXT_INTR_RESCHED_VPE0 16 +#define GIC_IPI_EXT_INTR_CALLFNC_VPE0 17 +#define GIC_IPI_EXT_INTR_RESCHED_VPE1 18 +#define GIC_IPI_EXT_INTR_CALLFNC_VPE1 19 +#define GIC_IPI_EXT_INTR_RESCHED_VPE2 20 +#define GIC_IPI_EXT_INTR_CALLFNC_VPE2 21 +#define GIC_IPI_EXT_INTR_RESCHED_VPE3 22 +#define GIC_IPI_EXT_INTR_CALLFNC_VPE3 23 + +#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) + +#ifndef __ASSEMBLY__ +extern void maltaint_init(void); +#endif + +#endif /* !(_MIPS_MALTAINT_H) */ diff --git a/arch/mips/include/asm/mips-boards/msc01_pci.h b/arch/mips/include/asm/mips-boards/msc01_pci.h new file mode 100644 index 000000000000..e036b7dd6deb --- /dev/null +++ b/arch/mips/include/asm/mips-boards/msc01_pci.h @@ -0,0 +1,258 @@ +/* + * PCI Register definitions for the MIPS System Controller. + * + * Copyright (C) 2002, 2005 MIPS Technologies, Inc. All rights reserved. + * Authors: Carsten Langgaard <carstenl@mips.com> + * Maciej W. Rozycki <macro@mips.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_MIPS_BOARDS_MSC01_PCI_H +#define __ASM_MIPS_BOARDS_MSC01_PCI_H + +/* + * Register offset addresses + */ + +#define MSC01_PCI_ID_OFS 0x0000 +#define MSC01_PCI_SC2PMBASL_OFS 0x0208 +#define MSC01_PCI_SC2PMMSKL_OFS 0x0218 +#define MSC01_PCI_SC2PMMAPL_OFS 0x0228 +#define MSC01_PCI_SC2PIOBASL_OFS 0x0248 +#define MSC01_PCI_SC2PIOMSKL_OFS 0x0258 +#define MSC01_PCI_SC2PIOMAPL_OFS 0x0268 +#define MSC01_PCI_P2SCMSKL_OFS 0x0308 +#define MSC01_PCI_P2SCMAPL_OFS 0x0318 +#define MSC01_PCI_INTCFG_OFS 0x0600 +#define MSC01_PCI_INTSTAT_OFS 0x0608 +#define MSC01_PCI_CFGADDR_OFS 0x0610 +#define MSC01_PCI_CFGDATA_OFS 0x0618 +#define MSC01_PCI_IACK_OFS 0x0620 +#define MSC01_PCI_HEAD0_OFS 0x2000 /* DevID, VendorID */ +#define MSC01_PCI_HEAD1_OFS 0x2008 /* Status, Command */ +#define MSC01_PCI_HEAD2_OFS 0x2010 /* Class code, RevID */ +#define MSC01_PCI_HEAD3_OFS 0x2018 /* bist, header, latency */ +#define MSC01_PCI_HEAD4_OFS 0x2020 /* BAR 0 */ +#define MSC01_PCI_HEAD5_OFS 0x2028 /* BAR 1 */ +#define MSC01_PCI_HEAD6_OFS 0x2030 /* BAR 2 */ +#define MSC01_PCI_HEAD7_OFS 0x2038 /* BAR 3 */ +#define MSC01_PCI_HEAD8_OFS 0x2040 /* BAR 4 */ +#define MSC01_PCI_HEAD9_OFS 0x2048 /* BAR 5 */ +#define MSC01_PCI_HEAD10_OFS 0x2050 /* CardBus CIS Ptr */ +#define MSC01_PCI_HEAD11_OFS 0x2058 /* SubSystem ID, -VendorID */ +#define MSC01_PCI_HEAD12_OFS 0x2060 /* ROM BAR */ +#define MSC01_PCI_HEAD13_OFS 0x2068 /* Capabilities ptr */ +#define MSC01_PCI_HEAD14_OFS 0x2070 /* reserved */ +#define MSC01_PCI_HEAD15_OFS 0x2078 /* Maxl, ming, intpin, int */ +#define MSC01_PCI_BAR0_OFS 0x2220 +#define MSC01_PCI_CFG_OFS 0x2380 +#define MSC01_PCI_SWAP_OFS 0x2388 + + +/***************************************************************************** + * Register encodings + ****************************************************************************/ + +#define MSC01_PCI_ID_ID_SHF 16 +#define MSC01_PCI_ID_ID_MSK 0x00ff0000 +#define MSC01_PCI_ID_ID_HOSTBRIDGE 82 +#define MSC01_PCI_ID_MAR_SHF 8 +#define MSC01_PCI_ID_MAR_MSK 0x0000ff00 +#define MSC01_PCI_ID_MIR_SHF 0 +#define MSC01_PCI_ID_MIR_MSK 0x000000ff + +#define MSC01_PCI_SC2PMBASL_BAS_SHF 24 +#define MSC01_PCI_SC2PMBASL_BAS_MSK 0xff000000 + +#define MSC01_PCI_SC2PMMSKL_MSK_SHF 24 +#define MSC01_PCI_SC2PMMSKL_MSK_MSK 0xff000000 + +#define MSC01_PCI_SC2PMMAPL_MAP_SHF 24 +#define MSC01_PCI_SC2PMMAPL_MAP_MSK 0xff000000 + +#define MSC01_PCI_SC2PIOBASL_BAS_SHF 24 +#define MSC01_PCI_SC2PIOBASL_BAS_MSK 0xff000000 + +#define MSC01_PCI_SC2PIOMSKL_MSK_SHF 24 +#define MSC01_PCI_SC2PIOMSKL_MSK_MSK 0xff000000 + +#define MSC01_PCI_SC2PIOMAPL_MAP_SHF 24 +#define MSC01_PCI_SC2PIOMAPL_MAP_MSK 0xff000000 + +#define MSC01_PCI_P2SCMSKL_MSK_SHF 24 +#define MSC01_PCI_P2SCMSKL_MSK_MSK 0xff000000 + +#define MSC01_PCI_P2SCMAPL_MAP_SHF 24 +#define MSC01_PCI_P2SCMAPL_MAP_MSK 0xff000000 + +#define MSC01_PCI_INTCFG_RST_SHF 10 +#define MSC01_PCI_INTCFG_RST_MSK 0x00000400 +#define MSC01_PCI_INTCFG_RST_BIT 0x00000400 +#define MSC01_PCI_INTCFG_MWE_SHF 9 +#define MSC01_PCI_INTCFG_MWE_MSK 0x00000200 +#define MSC01_PCI_INTCFG_MWE_BIT 0x00000200 +#define MSC01_PCI_INTCFG_DTO_SHF 8 +#define MSC01_PCI_INTCFG_DTO_MSK 0x00000100 +#define MSC01_PCI_INTCFG_DTO_BIT 0x00000100 +#define MSC01_PCI_INTCFG_MA_SHF 7 +#define MSC01_PCI_INTCFG_MA_MSK 0x00000080 +#define MSC01_PCI_INTCFG_MA_BIT 0x00000080 +#define MSC01_PCI_INTCFG_TA_SHF 6 +#define MSC01_PCI_INTCFG_TA_MSK 0x00000040 +#define MSC01_PCI_INTCFG_TA_BIT 0x00000040 +#define MSC01_PCI_INTCFG_RTY_SHF 5 +#define MSC01_PCI_INTCFG_RTY_MSK 0x00000020 +#define MSC01_PCI_INTCFG_RTY_BIT 0x00000020 +#define MSC01_PCI_INTCFG_MWP_SHF 4 +#define MSC01_PCI_INTCFG_MWP_MSK 0x00000010 +#define MSC01_PCI_INTCFG_MWP_BIT 0x00000010 +#define MSC01_PCI_INTCFG_MRP_SHF 3 +#define MSC01_PCI_INTCFG_MRP_MSK 0x00000008 +#define MSC01_PCI_INTCFG_MRP_BIT 0x00000008 +#define MSC01_PCI_INTCFG_SWP_SHF 2 +#define MSC01_PCI_INTCFG_SWP_MSK 0x00000004 +#define MSC01_PCI_INTCFG_SWP_BIT 0x00000004 +#define MSC01_PCI_INTCFG_SRP_SHF 1 +#define MSC01_PCI_INTCFG_SRP_MSK 0x00000002 +#define MSC01_PCI_INTCFG_SRP_BIT 0x00000002 +#define MSC01_PCI_INTCFG_SE_SHF 0 +#define MSC01_PCI_INTCFG_SE_MSK 0x00000001 +#define MSC01_PCI_INTCFG_SE_BIT 0x00000001 + +#define MSC01_PCI_INTSTAT_RST_SHF 10 +#define MSC01_PCI_INTSTAT_RST_MSK 0x00000400 +#define MSC01_PCI_INTSTAT_RST_BIT 0x00000400 +#define MSC01_PCI_INTSTAT_MWE_SHF 9 +#define MSC01_PCI_INTSTAT_MWE_MSK 0x00000200 +#define MSC01_PCI_INTSTAT_MWE_BIT 0x00000200 +#define MSC01_PCI_INTSTAT_DTO_SHF 8 +#define MSC01_PCI_INTSTAT_DTO_MSK 0x00000100 +#define MSC01_PCI_INTSTAT_DTO_BIT 0x00000100 +#define MSC01_PCI_INTSTAT_MA_SHF 7 +#define MSC01_PCI_INTSTAT_MA_MSK 0x00000080 +#define MSC01_PCI_INTSTAT_MA_BIT 0x00000080 +#define MSC01_PCI_INTSTAT_TA_SHF 6 +#define MSC01_PCI_INTSTAT_TA_MSK 0x00000040 +#define MSC01_PCI_INTSTAT_TA_BIT 0x00000040 +#define MSC01_PCI_INTSTAT_RTY_SHF 5 +#define MSC01_PCI_INTSTAT_RTY_MSK 0x00000020 +#define MSC01_PCI_INTSTAT_RTY_BIT 0x00000020 +#define MSC01_PCI_INTSTAT_MWP_SHF 4 +#define MSC01_PCI_INTSTAT_MWP_MSK 0x00000010 +#define MSC01_PCI_INTSTAT_MWP_BIT 0x00000010 +#define MSC01_PCI_INTSTAT_MRP_SHF 3 +#define MSC01_PCI_INTSTAT_MRP_MSK 0x00000008 +#define MSC01_PCI_INTSTAT_MRP_BIT 0x00000008 +#define MSC01_PCI_INTSTAT_SWP_SHF 2 +#define MSC01_PCI_INTSTAT_SWP_MSK 0x00000004 +#define MSC01_PCI_INTSTAT_SWP_BIT 0x00000004 +#define MSC01_PCI_INTSTAT_SRP_SHF 1 +#define MSC01_PCI_INTSTAT_SRP_MSK 0x00000002 +#define MSC01_PCI_INTSTAT_SRP_BIT 0x00000002 +#define MSC01_PCI_INTSTAT_SE_SHF 0 +#define MSC01_PCI_INTSTAT_SE_MSK 0x00000001 +#define MSC01_PCI_INTSTAT_SE_BIT 0x00000001 + +#define MSC01_PCI_CFGADDR_BNUM_SHF 16 +#define MSC01_PCI_CFGADDR_BNUM_MSK 0x00ff0000 +#define MSC01_PCI_CFGADDR_DNUM_SHF 11 +#define MSC01_PCI_CFGADDR_DNUM_MSK 0x0000f800 +#define MSC01_PCI_CFGADDR_FNUM_SHF 8 +#define MSC01_PCI_CFGADDR_FNUM_MSK 0x00000700 +#define MSC01_PCI_CFGADDR_RNUM_SHF 2 +#define MSC01_PCI_CFGADDR_RNUM_MSK 0x000000fc + +#define MSC01_PCI_CFGDATA_DATA_SHF 0 +#define MSC01_PCI_CFGDATA_DATA_MSK 0xffffffff + +/* The defines below are ONLY valid for a MEM bar! */ +#define MSC01_PCI_BAR0_SIZE_SHF 4 +#define MSC01_PCI_BAR0_SIZE_MSK 0xfffffff0 +#define MSC01_PCI_BAR0_P_SHF 3 +#define MSC01_PCI_BAR0_P_MSK 0x00000008 +#define MSC01_PCI_BAR0_P_BIT MSC01_PCI_BAR0_P_MSK +#define MSC01_PCI_BAR0_D_SHF 1 +#define MSC01_PCI_BAR0_D_MSK 0x00000006 +#define MSC01_PCI_BAR0_T_SHF 0 +#define MSC01_PCI_BAR0_T_MSK 0x00000001 +#define MSC01_PCI_BAR0_T_BIT MSC01_PCI_BAR0_T_MSK + + +#define MSC01_PCI_CFG_RA_SHF 17 +#define MSC01_PCI_CFG_RA_MSK 0x00020000 +#define MSC01_PCI_CFG_RA_BIT MSC01_PCI_CFG_RA_MSK +#define MSC01_PCI_CFG_G_SHF 16 +#define MSC01_PCI_CFG_G_MSK 0x00010000 +#define MSC01_PCI_CFG_G_BIT MSC01_PCI_CFG_G_MSK +#define MSC01_PCI_CFG_EN_SHF 15 +#define MSC01_PCI_CFG_EN_MSK 0x00008000 +#define MSC01_PCI_CFG_EN_BIT MSC01_PCI_CFG_EN_MSK +#define MSC01_PCI_CFG_MAXRTRY_SHF 0 +#define MSC01_PCI_CFG_MAXRTRY_MSK 0x00000fff + +#define MSC01_PCI_SWAP_IO_SHF 18 +#define MSC01_PCI_SWAP_IO_MSK 0x000c0000 +#define MSC01_PCI_SWAP_MEM_SHF 16 +#define MSC01_PCI_SWAP_MEM_MSK 0x00030000 +#define MSC01_PCI_SWAP_BAR0_SHF 0 +#define MSC01_PCI_SWAP_BAR0_MSK 0x00000003 +#define MSC01_PCI_SWAP_NOSWAP 0 +#define MSC01_PCI_SWAP_BYTESWAP 1 + +/* + * MIPS System controller PCI register base. + * + * FIXME - are these macros specific to Malta and co or to the MSC? If the + * latter, they should be moved elsewhere. + */ +#define MIPS_MSC01_PCI_REG_BASE 0x1bd00000 +#define MIPS_SOCITSC_PCI_REG_BASE 0x1ff10000 + +extern unsigned long _pcictrl_msc; + +#define MSC01_PCI_REG_BASE _pcictrl_msc + +#define MSC_WRITE(reg, data) do { *(volatile u32 *)(reg) = data; } while (0) +#define MSC_READ(reg, data) do { data = *(volatile u32 *)(reg); } while (0) + +/* + * Registers absolute addresses + */ + +#define MSC01_PCI_ID (MSC01_PCI_REG_BASE + MSC01_PCI_ID_OFS) +#define MSC01_PCI_SC2PMBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMBASL_OFS) +#define MSC01_PCI_SC2PMMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMSKL_OFS) +#define MSC01_PCI_SC2PMMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMAPL_OFS) +#define MSC01_PCI_SC2PIOBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOBASL_OFS) +#define MSC01_PCI_SC2PIOMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMSKL_OFS) +#define MSC01_PCI_SC2PIOMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMAPL_OFS) +#define MSC01_PCI_P2SCMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMSKL_OFS) +#define MSC01_PCI_P2SCMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMAPL_OFS) +#define MSC01_PCI_INTCFG (MSC01_PCI_REG_BASE + MSC01_PCI_INTCFG_OFS) +#define MSC01_PCI_INTSTAT (MSC01_PCI_REG_BASE + MSC01_PCI_INTSTAT_OFS) +#define MSC01_PCI_CFGADDR (MSC01_PCI_REG_BASE + MSC01_PCI_CFGADDR_OFS) +#define MSC01_PCI_CFGDATA (MSC01_PCI_REG_BASE + MSC01_PCI_CFGDATA_OFS) +#define MSC01_PCI_IACK (MSC01_PCI_REG_BASE + MSC01_PCI_IACK_OFS) +#define MSC01_PCI_HEAD0 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD0_OFS) +#define MSC01_PCI_HEAD1 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD1_OFS) +#define MSC01_PCI_HEAD2 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD2_OFS) +#define MSC01_PCI_HEAD3 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD3_OFS) +#define MSC01_PCI_HEAD4 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD4_OFS) +#define MSC01_PCI_HEAD5 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD5_OFS) +#define MSC01_PCI_HEAD6 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD6_OFS) +#define MSC01_PCI_HEAD7 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD7_OFS) +#define MSC01_PCI_HEAD8 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD8_OFS) +#define MSC01_PCI_HEAD9 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD9_OFS) +#define MSC01_PCI_HEAD10 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD10_OFS) +#define MSC01_PCI_HEAD11 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) +#define MSC01_PCI_HEAD12 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) +#define MSC01_PCI_HEAD13 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) +#define MSC01_PCI_HEAD14 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) +#define MSC01_PCI_HEAD15 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) +#define MSC01_PCI_BAR0 (MSC01_PCI_REG_BASE + MSC01_PCI_BAR0_OFS) +#define MSC01_PCI_CFG (MSC01_PCI_REG_BASE + MSC01_PCI_CFG_OFS) +#define MSC01_PCI_SWAP (MSC01_PCI_REG_BASE + MSC01_PCI_SWAP_OFS) + +#endif /* __ASM_MIPS_BOARDS_MSC01_PCI_H */ diff --git a/arch/mips/include/asm/mips-boards/piix4.h b/arch/mips/include/asm/mips-boards/piix4.h new file mode 100644 index 000000000000..2971d60f2e95 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/piix4.h @@ -0,0 +1,80 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Register definitions for Intel PIIX4 South Bridge Device. + */ +#ifndef __ASM_MIPS_BOARDS_PIIX4_H +#define __ASM_MIPS_BOARDS_PIIX4_H + +/************************************************************************ + * IO register offsets + ************************************************************************/ +#define PIIX4_ICTLR1_ICW1 0x20 +#define PIIX4_ICTLR1_ICW2 0x21 +#define PIIX4_ICTLR1_ICW3 0x21 +#define PIIX4_ICTLR1_ICW4 0x21 +#define PIIX4_ICTLR2_ICW1 0xa0 +#define PIIX4_ICTLR2_ICW2 0xa1 +#define PIIX4_ICTLR2_ICW3 0xa1 +#define PIIX4_ICTLR2_ICW4 0xa1 +#define PIIX4_ICTLR1_OCW1 0x21 +#define PIIX4_ICTLR1_OCW2 0x20 +#define PIIX4_ICTLR1_OCW3 0x20 +#define PIIX4_ICTLR1_OCW4 0x20 +#define PIIX4_ICTLR2_OCW1 0xa1 +#define PIIX4_ICTLR2_OCW2 0xa0 +#define PIIX4_ICTLR2_OCW3 0xa0 +#define PIIX4_ICTLR2_OCW4 0xa0 + + +/************************************************************************ + * Register encodings. + ************************************************************************/ +#define PIIX4_OCW2_NSEOI (0x1 << 5) +#define PIIX4_OCW2_SEOI (0x3 << 5) +#define PIIX4_OCW2_RNSEOI (0x5 << 5) +#define PIIX4_OCW2_RAEOIS (0x4 << 5) +#define PIIX4_OCW2_RAEOIC (0x0 << 5) +#define PIIX4_OCW2_RSEOI (0x7 << 5) +#define PIIX4_OCW2_SP (0x6 << 5) +#define PIIX4_OCW2_NOP (0x2 << 5) + +#define PIIX4_OCW2_SEL (0x0 << 3) + +#define PIIX4_OCW2_ILS_0 0 +#define PIIX4_OCW2_ILS_1 1 +#define PIIX4_OCW2_ILS_2 2 +#define PIIX4_OCW2_ILS_3 3 +#define PIIX4_OCW2_ILS_4 4 +#define PIIX4_OCW2_ILS_5 5 +#define PIIX4_OCW2_ILS_6 6 +#define PIIX4_OCW2_ILS_7 7 +#define PIIX4_OCW2_ILS_8 0 +#define PIIX4_OCW2_ILS_9 1 +#define PIIX4_OCW2_ILS_10 2 +#define PIIX4_OCW2_ILS_11 3 +#define PIIX4_OCW2_ILS_12 4 +#define PIIX4_OCW2_ILS_13 5 +#define PIIX4_OCW2_ILS_14 6 +#define PIIX4_OCW2_ILS_15 7 + +#define PIIX4_OCW3_SEL (0x1 << 3) + +#define PIIX4_OCW3_IRR 0x2 +#define PIIX4_OCW3_ISR 0x3 + +#endif /* __ASM_MIPS_BOARDS_PIIX4_H */ diff --git a/arch/mips/include/asm/mips-boards/prom.h b/arch/mips/include/asm/mips-boards/prom.h new file mode 100644 index 000000000000..a9db576a9768 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/prom.h @@ -0,0 +1,47 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * MIPS boards bootprom interface for the Linux kernel. + * + */ + +#ifndef _MIPS_PROM_H +#define _MIPS_PROM_H + +extern char *prom_getcmdline(void); +extern char *prom_getenv(char *name); +extern void prom_init_cmdline(void); +extern void prom_meminit(void); +extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem); +extern void mips_display_message(const char *str); +extern void mips_display_word(unsigned int num); +extern void mips_scroll_message(void); +extern int get_ethernet_addr(char *ethernet_addr); + +/* Memory descriptor management. */ +#define PROM_MAX_PMEMBLOCKS 32 +struct prom_pmemblock { + unsigned long base; /* Within KSEG0. */ + unsigned int size; /* In bytes. */ + unsigned int type; /* free or prom memory */ +}; + +#endif /* !(_MIPS_PROM_H) */ diff --git a/arch/mips/include/asm/mips-boards/sim.h b/arch/mips/include/asm/mips-boards/sim.h new file mode 100644 index 000000000000..acb7c2331d98 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/sim.h @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ + +#ifndef _ASM_MIPS_BOARDS_SIM_H +#define _ASM_MIPS_BOARDS_SIM_H + +#define STATS_ON 1 +#define STATS_OFF 2 +#define STATS_CLEAR 3 +#define STATS_DUMP 4 +#define TRACE_ON 5 +#define TRACE_OFF 6 + + +#define simcfg(code) \ +({ \ + __asm__ __volatile__( \ + "sltiu $0,$0, %0" \ + ::"i"(code) \ + ); \ +}) + + + +#endif diff --git a/arch/mips/include/asm/mips-boards/simint.h b/arch/mips/include/asm/mips-boards/simint.h new file mode 100644 index 000000000000..8ef6db76d5c1 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/simint.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#ifndef _MIPS_SIMINT_H +#define _MIPS_SIMINT_H + +#include <irq.h> + +#define SIM_INT_BASE 0 +#define MIPSCPU_INT_MB0 2 +#define MIPS_CPU_TIMER_IRQ 7 + + +#define MSC01E_INT_BASE 64 + +#define MSC01E_INT_CPUCTR 11 + +#endif diff --git a/arch/mips/include/asm/mips_mt.h b/arch/mips/include/asm/mips_mt.h new file mode 100644 index 000000000000..ac7935203f89 --- /dev/null +++ b/arch/mips/include/asm/mips_mt.h @@ -0,0 +1,26 @@ +/* + * Definitions and decalrations for MIPS MT support + * that are common between SMTC, VSMP, and/or AP/SP + * kernel models. + */ +#ifndef __ASM_MIPS_MT_H +#define __ASM_MIPS_MT_H + +#include <linux/cpumask.h> + +/* + * How many VPEs and TCs is Linux allowed to use? 0 means no limit. + */ +extern int tclimit; +extern int vpelimit; + +extern cpumask_t mt_fpu_cpumask; +extern unsigned long mt_fpemul_threshold; + +extern void mips_mt_regdump(unsigned long previous_mvpcontrol_value); +extern void mips_mt_set_cpuoptions(void); + +struct class; +extern struct class *mt_class; + +#endif /* __ASM_MIPS_MT_H */ diff --git a/arch/mips/include/asm/mipsmtregs.h b/arch/mips/include/asm/mipsmtregs.h new file mode 100644 index 000000000000..c9420aa97e32 --- /dev/null +++ b/arch/mips/include/asm/mipsmtregs.h @@ -0,0 +1,395 @@ +/* + * MT regs definitions, follows on from mipsregs.h + * Copyright (C) 2004 - 2005 MIPS Technologies, Inc. All rights reserved. + * Elizabeth Clarke et. al. + * + */ +#ifndef _ASM_MIPSMTREGS_H +#define _ASM_MIPSMTREGS_H + +#include <asm/mipsregs.h> +#include <asm/war.h> + +#ifndef __ASSEMBLY__ + +/* + * C macros + */ + +#define read_c0_mvpcontrol() __read_32bit_c0_register($0, 1) +#define write_c0_mvpcontrol(val) __write_32bit_c0_register($0, 1, val) + +#define read_c0_mvpconf0() __read_32bit_c0_register($0, 2) +#define read_c0_mvpconf1() __read_32bit_c0_register($0, 3) + +#define read_c0_vpecontrol() __read_32bit_c0_register($1, 1) +#define write_c0_vpecontrol(val) __write_32bit_c0_register($1, 1, val) + +#define read_c0_vpeconf0() __read_32bit_c0_register($1, 2) +#define write_c0_vpeconf0(val) __write_32bit_c0_register($1, 2, val) + +#define read_c0_tcstatus() __read_32bit_c0_register($2, 1) +#define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val) + +#define read_c0_tcbind() __read_32bit_c0_register($2, 2) + +#define read_c0_tccontext() __read_32bit_c0_register($2, 5) +#define write_c0_tccontext(val) __write_32bit_c0_register($2, 5, val) + +#else /* Assembly */ +/* + * Macros for use in assembly language code + */ + +#define CP0_MVPCONTROL $0, 1 +#define CP0_MVPCONF0 $0, 2 +#define CP0_MVPCONF1 $0, 3 +#define CP0_VPECONTROL $1, 1 +#define CP0_VPECONF0 $1, 2 +#define CP0_VPECONF1 $1, 3 +#define CP0_YQMASK $1, 4 +#define CP0_VPESCHEDULE $1, 5 +#define CP0_VPESCHEFBK $1, 6 +#define CP0_TCSTATUS $2, 1 +#define CP0_TCBIND $2, 2 +#define CP0_TCRESTART $2, 3 +#define CP0_TCHALT $2, 4 +#define CP0_TCCONTEXT $2, 5 +#define CP0_TCSCHEDULE $2, 6 +#define CP0_TCSCHEFBK $2, 7 +#define CP0_SRSCONF0 $6, 1 +#define CP0_SRSCONF1 $6, 2 +#define CP0_SRSCONF2 $6, 3 +#define CP0_SRSCONF3 $6, 4 +#define CP0_SRSCONF4 $6, 5 + +#endif + +/* MVPControl fields */ +#define MVPCONTROL_EVP (_ULCAST_(1)) + +#define MVPCONTROL_VPC_SHIFT 1 +#define MVPCONTROL_VPC (_ULCAST_(1) << MVPCONTROL_VPC_SHIFT) + +#define MVPCONTROL_STLB_SHIFT 2 +#define MVPCONTROL_STLB (_ULCAST_(1) << MVPCONTROL_STLB_SHIFT) + + +/* MVPConf0 fields */ +#define MVPCONF0_PTC_SHIFT 0 +#define MVPCONF0_PTC ( _ULCAST_(0xff)) +#define MVPCONF0_PVPE_SHIFT 10 +#define MVPCONF0_PVPE ( _ULCAST_(0xf) << MVPCONF0_PVPE_SHIFT) +#define MVPCONF0_TCA_SHIFT 15 +#define MVPCONF0_TCA ( _ULCAST_(1) << MVPCONF0_TCA_SHIFT) +#define MVPCONF0_PTLBE_SHIFT 16 +#define MVPCONF0_PTLBE (_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT) +#define MVPCONF0_TLBS_SHIFT 29 +#define MVPCONF0_TLBS (_ULCAST_(1) << MVPCONF0_TLBS_SHIFT) +#define MVPCONF0_M_SHIFT 31 +#define MVPCONF0_M (_ULCAST_(0x1) << MVPCONF0_M_SHIFT) + + +/* config3 fields */ +#define CONFIG3_MT_SHIFT 2 +#define CONFIG3_MT (_ULCAST_(1) << CONFIG3_MT_SHIFT) + + +/* VPEControl fields (per VPE) */ +#define VPECONTROL_TARGTC (_ULCAST_(0xff)) + +#define VPECONTROL_TE_SHIFT 15 +#define VPECONTROL_TE (_ULCAST_(1) << VPECONTROL_TE_SHIFT) +#define VPECONTROL_EXCPT_SHIFT 16 +#define VPECONTROL_EXCPT (_ULCAST_(0x7) << VPECONTROL_EXCPT_SHIFT) + +/* Thread Exception Codes for EXCPT field */ +#define THREX_TU 0 +#define THREX_TO 1 +#define THREX_IYQ 2 +#define THREX_GSX 3 +#define THREX_YSCH 4 +#define THREX_GSSCH 5 + +#define VPECONTROL_GSI_SHIFT 20 +#define VPECONTROL_GSI (_ULCAST_(1) << VPECONTROL_GSI_SHIFT) +#define VPECONTROL_YSI_SHIFT 21 +#define VPECONTROL_YSI (_ULCAST_(1) << VPECONTROL_YSI_SHIFT) + +/* VPEConf0 fields (per VPE) */ +#define VPECONF0_VPA_SHIFT 0 +#define VPECONF0_VPA (_ULCAST_(1) << VPECONF0_VPA_SHIFT) +#define VPECONF0_MVP_SHIFT 1 +#define VPECONF0_MVP (_ULCAST_(1) << VPECONF0_MVP_SHIFT) +#define VPECONF0_XTC_SHIFT 21 +#define VPECONF0_XTC (_ULCAST_(0xff) << VPECONF0_XTC_SHIFT) + +/* TCStatus fields (per TC) */ +#define TCSTATUS_TASID (_ULCAST_(0xff)) +#define TCSTATUS_IXMT_SHIFT 10 +#define TCSTATUS_IXMT (_ULCAST_(1) << TCSTATUS_IXMT_SHIFT) +#define TCSTATUS_TKSU_SHIFT 11 +#define TCSTATUS_TKSU (_ULCAST_(3) << TCSTATUS_TKSU_SHIFT) +#define TCSTATUS_A_SHIFT 13 +#define TCSTATUS_A (_ULCAST_(1) << TCSTATUS_A_SHIFT) +#define TCSTATUS_DA_SHIFT 15 +#define TCSTATUS_DA (_ULCAST_(1) << TCSTATUS_DA_SHIFT) +#define TCSTATUS_DT_SHIFT 20 +#define TCSTATUS_DT (_ULCAST_(1) << TCSTATUS_DT_SHIFT) +#define TCSTATUS_TDS_SHIFT 21 +#define TCSTATUS_TDS (_ULCAST_(1) << TCSTATUS_TDS_SHIFT) +#define TCSTATUS_TSST_SHIFT 22 +#define TCSTATUS_TSST (_ULCAST_(1) << TCSTATUS_TSST_SHIFT) +#define TCSTATUS_RNST_SHIFT 23 +#define TCSTATUS_RNST (_ULCAST_(3) << TCSTATUS_RNST_SHIFT) +/* Codes for RNST */ +#define TC_RUNNING 0 +#define TC_WAITING 1 +#define TC_YIELDING 2 +#define TC_GATED 3 + +#define TCSTATUS_TMX_SHIFT 27 +#define TCSTATUS_TMX (_ULCAST_(1) << TCSTATUS_TMX_SHIFT) +/* TCStatus TCU bits can use same definitions/offsets as CU bits in Status */ + +/* TCBind */ +#define TCBIND_CURVPE_SHIFT 0 +#define TCBIND_CURVPE (_ULCAST_(0xf)) + +#define TCBIND_CURTC_SHIFT 21 + +#define TCBIND_CURTC (_ULCAST_(0xff) << TCBIND_CURTC_SHIFT) + +/* TCHalt */ +#define TCHALT_H (_ULCAST_(1)) + +#ifndef __ASSEMBLY__ + +static inline unsigned int dvpe(void) +{ + int res = 0; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set noat \n" + " .set mips32r2 \n" + " .word 0x41610001 # dvpe $1 \n" + " move %0, $1 \n" + " ehb \n" + " .set pop \n" + : "=r" (res)); + + instruction_hazard(); + + return res; +} + +static inline void __raw_evpe(void) +{ + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set noat \n" + " .set mips32r2 \n" + " .word 0x41600021 # evpe \n" + " ehb \n" + " .set pop \n"); +} + +/* Enable virtual processor execution if previous suggested it should be. + EVPE_ENABLE to force */ + +#define EVPE_ENABLE MVPCONTROL_EVP + +static inline void evpe(int previous) +{ + if ((previous & MVPCONTROL_EVP)) + __raw_evpe(); +} + +static inline unsigned int dmt(void) +{ + int res; + + __asm__ __volatile__( + " .set push \n" + " .set mips32r2 \n" + " .set noat \n" + " .word 0x41610BC1 # dmt $1 \n" + " ehb \n" + " move %0, $1 \n" + " .set pop \n" + : "=r" (res)); + + instruction_hazard(); + + return res; +} + +static inline void __raw_emt(void) +{ + __asm__ __volatile__( + " .set noreorder \n" + " .set mips32r2 \n" + " .word 0x41600be1 # emt \n" + " ehb \n" + " .set mips0 \n" + " .set reorder"); +} + +/* enable multi-threaded execution if previous suggested it should be. + EMT_ENABLE to force */ + +#define EMT_ENABLE VPECONTROL_TE + +static inline void emt(int previous) +{ + if ((previous & EMT_ENABLE)) + __raw_emt(); +} + +static inline void ehb(void) +{ + __asm__ __volatile__( + " .set mips32r2 \n" + " ehb \n" + " .set mips0 \n"); +} + +#define mftc0(rt,sel) \ +({ \ + unsigned long __res; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set mips32r2 \n" \ + " .set noat \n" \ + " # mftc0 $1, $" #rt ", " #sel " \n" \ + " .word 0x41000800 | (" #rt " << 16) | " #sel " \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__res)); \ + \ + __res; \ +}) + +#define mftgpr(rt) \ +({ \ + unsigned long __res; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " .set mips32r2 \n" \ + " # mftgpr $1," #rt " \n" \ + " .word 0x41000820 | (" #rt " << 16) \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__res)); \ + \ + __res; \ +}) + +#define mftr(rt, u, sel) \ +({ \ + unsigned long __res; \ + \ + __asm__ __volatile__( \ + " mftr %0, " #rt ", " #u ", " #sel " \n" \ + : "=r" (__res)); \ + \ + __res; \ +}) + +#define mttgpr(rd,v) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set mips32r2 \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mttgpr $1, " #rd " \n" \ + " .word 0x41810020 | (" #rd " << 11) \n" \ + " .set pop \n" \ + : : "r" (v)); \ +} while (0) + +#define mttc0(rd, sel, v) \ +({ \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set mips32r2 \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mttc0 %0," #rd ", " #sel " \n" \ + " .word 0x41810000 | (" #rd " << 11) | " #sel " \n" \ + " .set pop \n" \ + : \ + : "r" (v)); \ +}) + + +#define mttr(rd, u, sel, v) \ +({ \ + __asm__ __volatile__( \ + "mttr %0," #rd ", " #u ", " #sel \ + : : "r" (v)); \ +}) + + +#define settc(tc) \ +do { \ + write_c0_vpecontrol((read_c0_vpecontrol()&~VPECONTROL_TARGTC) | (tc)); \ + ehb(); \ +} while (0) + + +/* you *must* set the target tc (settc) before trying to use these */ +#define read_vpe_c0_vpecontrol() mftc0(1, 1) +#define write_vpe_c0_vpecontrol(val) mttc0(1, 1, val) +#define read_vpe_c0_vpeconf0() mftc0(1, 2) +#define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val) +#define read_vpe_c0_count() mftc0(9, 0) +#define write_vpe_c0_count(val) mttc0(9, 0, val) +#define read_vpe_c0_status() mftc0(12, 0) +#define write_vpe_c0_status(val) mttc0(12, 0, val) +#define read_vpe_c0_cause() mftc0(13, 0) +#define write_vpe_c0_cause(val) mttc0(13, 0, val) +#define read_vpe_c0_config() mftc0(16, 0) +#define write_vpe_c0_config(val) mttc0(16, 0, val) +#define read_vpe_c0_config1() mftc0(16, 1) +#define write_vpe_c0_config1(val) mttc0(16, 1, val) +#define read_vpe_c0_config7() mftc0(16, 7) +#define write_vpe_c0_config7(val) mttc0(16, 7, val) +#define read_vpe_c0_ebase() mftc0(15, 1) +#define write_vpe_c0_ebase(val) mttc0(15, 1, val) +#define write_vpe_c0_compare(val) mttc0(11, 0, val) +#define read_vpe_c0_badvaddr() mftc0(8, 0) +#define read_vpe_c0_epc() mftc0(14, 0) +#define write_vpe_c0_epc(val) mttc0(14, 0, val) + + +/* TC */ +#define read_tc_c0_tcstatus() mftc0(2, 1) +#define write_tc_c0_tcstatus(val) mttc0(2, 1, val) +#define read_tc_c0_tcbind() mftc0(2, 2) +#define write_tc_c0_tcbind(val) mttc0(2, 2, val) +#define read_tc_c0_tcrestart() mftc0(2, 3) +#define write_tc_c0_tcrestart(val) mttc0(2, 3, val) +#define read_tc_c0_tchalt() mftc0(2, 4) +#define write_tc_c0_tchalt(val) mttc0(2, 4, val) +#define read_tc_c0_tccontext() mftc0(2, 5) +#define write_tc_c0_tccontext(val) mttc0(2, 5, val) + +/* GPR */ +#define read_tc_gpr_sp() mftgpr(29) +#define write_tc_gpr_sp(val) mttgpr(29, val) +#define read_tc_gpr_gp() mftgpr(28) +#define write_tc_gpr_gp(val) mttgpr(28, val) + +__BUILD_SET_C0(mvpcontrol) + +#endif /* Not __ASSEMBLY__ */ + +#endif diff --git a/arch/mips/include/asm/mipsprom.h b/arch/mips/include/asm/mipsprom.h new file mode 100644 index 000000000000..146d41b67adc --- /dev/null +++ b/arch/mips/include/asm/mipsprom.h @@ -0,0 +1,76 @@ +#ifndef __ASM_MIPS_PROM_H +#define __ASM_MIPS_PROM_H + +#define PROM_RESET 0 +#define PROM_EXEC 1 +#define PROM_RESTART 2 +#define PROM_REINIT 3 +#define PROM_REBOOT 4 +#define PROM_AUTOBOOT 5 +#define PROM_OPEN 6 +#define PROM_READ 7 +#define PROM_WRITE 8 +#define PROM_IOCTL 9 +#define PROM_CLOSE 10 +#define PROM_GETCHAR 11 +#define PROM_PUTCHAR 12 +#define PROM_SHOWCHAR 13 /* XXX */ +#define PROM_GETS 14 /* XXX */ +#define PROM_PUTS 15 /* XXX */ +#define PROM_PRINTF 16 /* XXX */ + +/* What are these for? */ +#define PROM_INITPROTO 17 /* XXX */ +#define PROM_PROTOENABLE 18 /* XXX */ +#define PROM_PROTODISABLE 19 /* XXX */ +#define PROM_GETPKT 20 /* XXX */ +#define PROM_PUTPKT 21 /* XXX */ + +/* More PROM shit. Probably has to do with VME RMW cycles??? */ +#define PROM_ORW_RMW 22 /* XXX */ +#define PROM_ORH_RMW 23 /* XXX */ +#define PROM_ORB_RMW 24 /* XXX */ +#define PROM_ANDW_RMW 25 /* XXX */ +#define PROM_ANDH_RMW 26 /* XXX */ +#define PROM_ANDB_RMW 27 /* XXX */ + +/* Cache handling stuff */ +#define PROM_FLUSHCACHE 28 /* XXX */ +#define PROM_CLEARCACHE 29 /* XXX */ + +/* Libc alike stuff */ +#define PROM_SETJMP 30 /* XXX */ +#define PROM_LONGJMP 31 /* XXX */ +#define PROM_BEVUTLB 32 /* XXX */ +#define PROM_GETENV 33 /* XXX */ +#define PROM_SETENV 34 /* XXX */ +#define PROM_ATOB 35 /* XXX */ +#define PROM_STRCMP 36 /* XXX */ +#define PROM_STRLEN 37 /* XXX */ +#define PROM_STRCPY 38 /* XXX */ +#define PROM_STRCAT 39 /* XXX */ + +/* Misc stuff */ +#define PROM_PARSER 40 /* XXX */ +#define PROM_RANGE 41 /* XXX */ +#define PROM_ARGVIZE 42 /* XXX */ +#define PROM_HELP 43 /* XXX */ + +/* Entry points for some PROM commands */ +#define PROM_DUMPCMD 44 /* XXX */ +#define PROM_SETENVCMD 45 /* XXX */ +#define PROM_UNSETENVCMD 46 /* XXX */ +#define PROM_PRINTENVCMD 47 /* XXX */ +#define PROM_BEVEXCEPT 48 /* XXX */ +#define PROM_ENABLECMD 49 /* XXX */ +#define PROM_DISABLECMD 50 /* XXX */ + +#define PROM_CLEARNOFAULT 51 /* XXX */ +#define PROM_NOTIMPLEMENT 52 /* XXX */ + +#define PROM_NV_GET 53 /* XXX */ +#define PROM_NV_SET 54 /* XXX */ + +extern char *prom_getenv(char *); + +#endif /* __ASM_MIPS_PROM_H */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h new file mode 100644 index 000000000000..979866000da4 --- /dev/null +++ b/arch/mips/include/asm/mipsregs.h @@ -0,0 +1,1526 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle + * Copyright (C) 2000 Silicon Graphics, Inc. + * Modified for further R[236]000 support by Paul M. Antoine, 1996. + * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000, 07 MIPS Technologies, Inc. + * Copyright (C) 2003, 2004 Maciej W. Rozycki + */ +#ifndef _ASM_MIPSREGS_H +#define _ASM_MIPSREGS_H + +#include <linux/linkage.h> +#include <asm/hazards.h> +#include <asm/war.h> + +/* + * The following macros are especially useful for __asm__ + * inline assembler. + */ +#ifndef __STR +#define __STR(x) #x +#endif +#ifndef STR +#define STR(x) __STR(x) +#endif + +/* + * Configure language + */ +#ifdef __ASSEMBLY__ +#define _ULCAST_ +#else +#define _ULCAST_ (unsigned long) +#endif + +/* + * Coprocessor 0 register names + */ +#define CP0_INDEX $0 +#define CP0_RANDOM $1 +#define CP0_ENTRYLO0 $2 +#define CP0_ENTRYLO1 $3 +#define CP0_CONF $3 +#define CP0_CONTEXT $4 +#define CP0_PAGEMASK $5 +#define CP0_WIRED $6 +#define CP0_INFO $7 +#define CP0_BADVADDR $8 +#define CP0_COUNT $9 +#define CP0_ENTRYHI $10 +#define CP0_COMPARE $11 +#define CP0_STATUS $12 +#define CP0_CAUSE $13 +#define CP0_EPC $14 +#define CP0_PRID $15 +#define CP0_CONFIG $16 +#define CP0_LLADDR $17 +#define CP0_WATCHLO $18 +#define CP0_WATCHHI $19 +#define CP0_XCONTEXT $20 +#define CP0_FRAMEMASK $21 +#define CP0_DIAGNOSTIC $22 +#define CP0_DEBUG $23 +#define CP0_DEPC $24 +#define CP0_PERFORMANCE $25 +#define CP0_ECC $26 +#define CP0_CACHEERR $27 +#define CP0_TAGLO $28 +#define CP0_TAGHI $29 +#define CP0_ERROREPC $30 +#define CP0_DESAVE $31 + +/* + * R4640/R4650 cp0 register names. These registers are listed + * here only for completeness; without MMU these CPUs are not useable + * by Linux. A future ELKS port might take make Linux run on them + * though ... + */ +#define CP0_IBASE $0 +#define CP0_IBOUND $1 +#define CP0_DBASE $2 +#define CP0_DBOUND $3 +#define CP0_CALG $17 +#define CP0_IWATCH $18 +#define CP0_DWATCH $19 + +/* + * Coprocessor 0 Set 1 register names + */ +#define CP0_S1_DERRADDR0 $26 +#define CP0_S1_DERRADDR1 $27 +#define CP0_S1_INTCONTROL $20 + +/* + * Coprocessor 0 Set 2 register names + */ +#define CP0_S2_SRSCTL $12 /* MIPSR2 */ + +/* + * Coprocessor 0 Set 3 register names + */ +#define CP0_S3_SRSMAP $12 /* MIPSR2 */ + +/* + * TX39 Series + */ +#define CP0_TX39_CACHE $7 + +/* + * Coprocessor 1 (FPU) register names + */ +#define CP1_REVISION $0 +#define CP1_STATUS $31 + +/* + * FPU Status Register Values + */ +/* + * Status Register Values + */ + +#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */ +#define FPU_CSR_COND 0x00800000 /* $fcc0 */ +#define FPU_CSR_COND0 0x00800000 /* $fcc0 */ +#define FPU_CSR_COND1 0x02000000 /* $fcc1 */ +#define FPU_CSR_COND2 0x04000000 /* $fcc2 */ +#define FPU_CSR_COND3 0x08000000 /* $fcc3 */ +#define FPU_CSR_COND4 0x10000000 /* $fcc4 */ +#define FPU_CSR_COND5 0x20000000 /* $fcc5 */ +#define FPU_CSR_COND6 0x40000000 /* $fcc6 */ +#define FPU_CSR_COND7 0x80000000 /* $fcc7 */ + +/* + * X the exception cause indicator + * E the exception enable + * S the sticky/flag bit +*/ +#define FPU_CSR_ALL_X 0x0003f000 +#define FPU_CSR_UNI_X 0x00020000 +#define FPU_CSR_INV_X 0x00010000 +#define FPU_CSR_DIV_X 0x00008000 +#define FPU_CSR_OVF_X 0x00004000 +#define FPU_CSR_UDF_X 0x00002000 +#define FPU_CSR_INE_X 0x00001000 + +#define FPU_CSR_ALL_E 0x00000f80 +#define FPU_CSR_INV_E 0x00000800 +#define FPU_CSR_DIV_E 0x00000400 +#define FPU_CSR_OVF_E 0x00000200 +#define FPU_CSR_UDF_E 0x00000100 +#define FPU_CSR_INE_E 0x00000080 + +#define FPU_CSR_ALL_S 0x0000007c +#define FPU_CSR_INV_S 0x00000040 +#define FPU_CSR_DIV_S 0x00000020 +#define FPU_CSR_OVF_S 0x00000010 +#define FPU_CSR_UDF_S 0x00000008 +#define FPU_CSR_INE_S 0x00000004 + +/* rounding mode */ +#define FPU_CSR_RN 0x0 /* nearest */ +#define FPU_CSR_RZ 0x1 /* towards zero */ +#define FPU_CSR_RU 0x2 /* towards +Infinity */ +#define FPU_CSR_RD 0x3 /* towards -Infinity */ + + +/* + * Values for PageMask register + */ +#ifdef CONFIG_CPU_VR41XX + +/* Why doesn't stupidity hurt ... */ + +#define PM_1K 0x00000000 +#define PM_4K 0x00001800 +#define PM_16K 0x00007800 +#define PM_64K 0x0001f800 +#define PM_256K 0x0007f800 + +#else + +#define PM_4K 0x00000000 +#define PM_16K 0x00006000 +#define PM_64K 0x0001e000 +#define PM_256K 0x0007e000 +#define PM_1M 0x001fe000 +#define PM_4M 0x007fe000 +#define PM_16M 0x01ffe000 +#define PM_64M 0x07ffe000 +#define PM_256M 0x1fffe000 + +#endif + +/* + * Default page size for a given kernel configuration + */ +#ifdef CONFIG_PAGE_SIZE_4KB +#define PM_DEFAULT_MASK PM_4K +#elif defined(CONFIG_PAGE_SIZE_16KB) +#define PM_DEFAULT_MASK PM_16K +#elif defined(CONFIG_PAGE_SIZE_64KB) +#define PM_DEFAULT_MASK PM_64K +#else +#error Bad page size configuration! +#endif + + +/* + * Values used for computation of new tlb entries + */ +#define PL_4K 12 +#define PL_16K 14 +#define PL_64K 16 +#define PL_256K 18 +#define PL_1M 20 +#define PL_4M 22 +#define PL_16M 24 +#define PL_64M 26 +#define PL_256M 28 + +/* + * R4x00 interrupt enable / cause bits + */ +#define IE_SW0 (_ULCAST_(1) << 8) +#define IE_SW1 (_ULCAST_(1) << 9) +#define IE_IRQ0 (_ULCAST_(1) << 10) +#define IE_IRQ1 (_ULCAST_(1) << 11) +#define IE_IRQ2 (_ULCAST_(1) << 12) +#define IE_IRQ3 (_ULCAST_(1) << 13) +#define IE_IRQ4 (_ULCAST_(1) << 14) +#define IE_IRQ5 (_ULCAST_(1) << 15) + +/* + * R4x00 interrupt cause bits + */ +#define C_SW0 (_ULCAST_(1) << 8) +#define C_SW1 (_ULCAST_(1) << 9) +#define C_IRQ0 (_ULCAST_(1) << 10) +#define C_IRQ1 (_ULCAST_(1) << 11) +#define C_IRQ2 (_ULCAST_(1) << 12) +#define C_IRQ3 (_ULCAST_(1) << 13) +#define C_IRQ4 (_ULCAST_(1) << 14) +#define C_IRQ5 (_ULCAST_(1) << 15) + +/* + * Bitfields in the R4xx0 cp0 status register + */ +#define ST0_IE 0x00000001 +#define ST0_EXL 0x00000002 +#define ST0_ERL 0x00000004 +#define ST0_KSU 0x00000018 +# define KSU_USER 0x00000010 +# define KSU_SUPERVISOR 0x00000008 +# define KSU_KERNEL 0x00000000 +#define ST0_UX 0x00000020 +#define ST0_SX 0x00000040 +#define ST0_KX 0x00000080 +#define ST0_DE 0x00010000 +#define ST0_CE 0x00020000 + +/* + * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate + * cacheops in userspace. This bit exists only on RM7000 and RM9000 + * processors. + */ +#define ST0_CO 0x08000000 + +/* + * Bitfields in the R[23]000 cp0 status register. + */ +#define ST0_IEC 0x00000001 +#define ST0_KUC 0x00000002 +#define ST0_IEP 0x00000004 +#define ST0_KUP 0x00000008 +#define ST0_IEO 0x00000010 +#define ST0_KUO 0x00000020 +/* bits 6 & 7 are reserved on R[23]000 */ +#define ST0_ISC 0x00010000 +#define ST0_SWC 0x00020000 +#define ST0_CM 0x00080000 + +/* + * Bits specific to the R4640/R4650 + */ +#define ST0_UM (_ULCAST_(1) << 4) +#define ST0_IL (_ULCAST_(1) << 23) +#define ST0_DL (_ULCAST_(1) << 24) + +/* + * Enable the MIPS MDMX and DSP ASEs + */ +#define ST0_MX 0x01000000 + +/* + * Bitfields in the TX39 family CP0 Configuration Register 3 + */ +#define TX39_CONF_ICS_SHIFT 19 +#define TX39_CONF_ICS_MASK 0x00380000 +#define TX39_CONF_ICS_1KB 0x00000000 +#define TX39_CONF_ICS_2KB 0x00080000 +#define TX39_CONF_ICS_4KB 0x00100000 +#define TX39_CONF_ICS_8KB 0x00180000 +#define TX39_CONF_ICS_16KB 0x00200000 + +#define TX39_CONF_DCS_SHIFT 16 +#define TX39_CONF_DCS_MASK 0x00070000 +#define TX39_CONF_DCS_1KB 0x00000000 +#define TX39_CONF_DCS_2KB 0x00010000 +#define TX39_CONF_DCS_4KB 0x00020000 +#define TX39_CONF_DCS_8KB 0x00030000 +#define TX39_CONF_DCS_16KB 0x00040000 + +#define TX39_CONF_CWFON 0x00004000 +#define TX39_CONF_WBON 0x00002000 +#define TX39_CONF_RF_SHIFT 10 +#define TX39_CONF_RF_MASK 0x00000c00 +#define TX39_CONF_DOZE 0x00000200 +#define TX39_CONF_HALT 0x00000100 +#define TX39_CONF_LOCK 0x00000080 +#define TX39_CONF_ICE 0x00000020 +#define TX39_CONF_DCE 0x00000010 +#define TX39_CONF_IRSIZE_SHIFT 2 +#define TX39_CONF_IRSIZE_MASK 0x0000000c +#define TX39_CONF_DRSIZE_SHIFT 0 +#define TX39_CONF_DRSIZE_MASK 0x00000003 + +/* + * Status register bits available in all MIPS CPUs. + */ +#define ST0_IM 0x0000ff00 +#define STATUSB_IP0 8 +#define STATUSF_IP0 (_ULCAST_(1) << 8) +#define STATUSB_IP1 9 +#define STATUSF_IP1 (_ULCAST_(1) << 9) +#define STATUSB_IP2 10 +#define STATUSF_IP2 (_ULCAST_(1) << 10) +#define STATUSB_IP3 11 +#define STATUSF_IP3 (_ULCAST_(1) << 11) +#define STATUSB_IP4 12 +#define STATUSF_IP4 (_ULCAST_(1) << 12) +#define STATUSB_IP5 13 +#define STATUSF_IP5 (_ULCAST_(1) << 13) +#define STATUSB_IP6 14 +#define STATUSF_IP6 (_ULCAST_(1) << 14) +#define STATUSB_IP7 15 +#define STATUSF_IP7 (_ULCAST_(1) << 15) +#define STATUSB_IP8 0 +#define STATUSF_IP8 (_ULCAST_(1) << 0) +#define STATUSB_IP9 1 +#define STATUSF_IP9 (_ULCAST_(1) << 1) +#define STATUSB_IP10 2 +#define STATUSF_IP10 (_ULCAST_(1) << 2) +#define STATUSB_IP11 3 +#define STATUSF_IP11 (_ULCAST_(1) << 3) +#define STATUSB_IP12 4 +#define STATUSF_IP12 (_ULCAST_(1) << 4) +#define STATUSB_IP13 5 +#define STATUSF_IP13 (_ULCAST_(1) << 5) +#define STATUSB_IP14 6 +#define STATUSF_IP14 (_ULCAST_(1) << 6) +#define STATUSB_IP15 7 +#define STATUSF_IP15 (_ULCAST_(1) << 7) +#define ST0_CH 0x00040000 +#define ST0_SR 0x00100000 +#define ST0_TS 0x00200000 +#define ST0_BEV 0x00400000 +#define ST0_RE 0x02000000 +#define ST0_FR 0x04000000 +#define ST0_CU 0xf0000000 +#define ST0_CU0 0x10000000 +#define ST0_CU1 0x20000000 +#define ST0_CU2 0x40000000 +#define ST0_CU3 0x80000000 +#define ST0_XX 0x80000000 /* MIPS IV naming */ + +/* + * Bitfields and bit numbers in the coprocessor 0 cause register. + * + * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. + */ +#define CAUSEB_EXCCODE 2 +#define CAUSEF_EXCCODE (_ULCAST_(31) << 2) +#define CAUSEB_IP 8 +#define CAUSEF_IP (_ULCAST_(255) << 8) +#define CAUSEB_IP0 8 +#define CAUSEF_IP0 (_ULCAST_(1) << 8) +#define CAUSEB_IP1 9 +#define CAUSEF_IP1 (_ULCAST_(1) << 9) +#define CAUSEB_IP2 10 +#define CAUSEF_IP2 (_ULCAST_(1) << 10) +#define CAUSEB_IP3 11 +#define CAUSEF_IP3 (_ULCAST_(1) << 11) +#define CAUSEB_IP4 12 +#define CAUSEF_IP4 (_ULCAST_(1) << 12) +#define CAUSEB_IP5 13 +#define CAUSEF_IP5 (_ULCAST_(1) << 13) +#define CAUSEB_IP6 14 +#define CAUSEF_IP6 (_ULCAST_(1) << 14) +#define CAUSEB_IP7 15 +#define CAUSEF_IP7 (_ULCAST_(1) << 15) +#define CAUSEB_IV 23 +#define CAUSEF_IV (_ULCAST_(1) << 23) +#define CAUSEB_CE 28 +#define CAUSEF_CE (_ULCAST_(3) << 28) +#define CAUSEB_BD 31 +#define CAUSEF_BD (_ULCAST_(1) << 31) + +/* + * Bits in the coprocessor 0 config register. + */ +/* Generic bits. */ +#define CONF_CM_CACHABLE_NO_WA 0 +#define CONF_CM_CACHABLE_WA 1 +#define CONF_CM_UNCACHED 2 +#define CONF_CM_CACHABLE_NONCOHERENT 3 +#define CONF_CM_CACHABLE_CE 4 +#define CONF_CM_CACHABLE_COW 5 +#define CONF_CM_CACHABLE_CUW 6 +#define CONF_CM_CACHABLE_ACCELERATED 7 +#define CONF_CM_CMASK 7 +#define CONF_BE (_ULCAST_(1) << 15) + +/* Bits common to various processors. */ +#define CONF_CU (_ULCAST_(1) << 3) +#define CONF_DB (_ULCAST_(1) << 4) +#define CONF_IB (_ULCAST_(1) << 5) +#define CONF_DC (_ULCAST_(7) << 6) +#define CONF_IC (_ULCAST_(7) << 9) +#define CONF_EB (_ULCAST_(1) << 13) +#define CONF_EM (_ULCAST_(1) << 14) +#define CONF_SM (_ULCAST_(1) << 16) +#define CONF_SC (_ULCAST_(1) << 17) +#define CONF_EW (_ULCAST_(3) << 18) +#define CONF_EP (_ULCAST_(15)<< 24) +#define CONF_EC (_ULCAST_(7) << 28) +#define CONF_CM (_ULCAST_(1) << 31) + +/* Bits specific to the R4xx0. */ +#define R4K_CONF_SW (_ULCAST_(1) << 20) +#define R4K_CONF_SS (_ULCAST_(1) << 21) +#define R4K_CONF_SB (_ULCAST_(3) << 22) + +/* Bits specific to the R5000. */ +#define R5K_CONF_SE (_ULCAST_(1) << 12) +#define R5K_CONF_SS (_ULCAST_(3) << 20) + +/* Bits specific to the RM7000. */ +#define RM7K_CONF_SE (_ULCAST_(1) << 3) +#define RM7K_CONF_TE (_ULCAST_(1) << 12) +#define RM7K_CONF_CLK (_ULCAST_(1) << 16) +#define RM7K_CONF_TC (_ULCAST_(1) << 17) +#define RM7K_CONF_SI (_ULCAST_(3) << 20) +#define RM7K_CONF_SC (_ULCAST_(1) << 31) + +/* Bits specific to the R10000. */ +#define R10K_CONF_DN (_ULCAST_(3) << 3) +#define R10K_CONF_CT (_ULCAST_(1) << 5) +#define R10K_CONF_PE (_ULCAST_(1) << 6) +#define R10K_CONF_PM (_ULCAST_(3) << 7) +#define R10K_CONF_EC (_ULCAST_(15)<< 9) +#define R10K_CONF_SB (_ULCAST_(1) << 13) +#define R10K_CONF_SK (_ULCAST_(1) << 14) +#define R10K_CONF_SS (_ULCAST_(7) << 16) +#define R10K_CONF_SC (_ULCAST_(7) << 19) +#define R10K_CONF_DC (_ULCAST_(7) << 26) +#define R10K_CONF_IC (_ULCAST_(7) << 29) + +/* Bits specific to the VR41xx. */ +#define VR41_CONF_CS (_ULCAST_(1) << 12) +#define VR41_CONF_P4K (_ULCAST_(1) << 13) +#define VR41_CONF_BP (_ULCAST_(1) << 16) +#define VR41_CONF_M16 (_ULCAST_(1) << 20) +#define VR41_CONF_AD (_ULCAST_(1) << 23) + +/* Bits specific to the R30xx. */ +#define R30XX_CONF_FDM (_ULCAST_(1) << 19) +#define R30XX_CONF_REV (_ULCAST_(1) << 22) +#define R30XX_CONF_AC (_ULCAST_(1) << 23) +#define R30XX_CONF_RF (_ULCAST_(1) << 24) +#define R30XX_CONF_HALT (_ULCAST_(1) << 25) +#define R30XX_CONF_FPINT (_ULCAST_(7) << 26) +#define R30XX_CONF_DBR (_ULCAST_(1) << 29) +#define R30XX_CONF_SB (_ULCAST_(1) << 30) +#define R30XX_CONF_LOCK (_ULCAST_(1) << 31) + +/* Bits specific to the TX49. */ +#define TX49_CONF_DC (_ULCAST_(1) << 16) +#define TX49_CONF_IC (_ULCAST_(1) << 17) /* conflict with CONF_SC */ +#define TX49_CONF_HALT (_ULCAST_(1) << 18) +#define TX49_CONF_CWFON (_ULCAST_(1) << 27) + +/* Bits specific to the MIPS32/64 PRA. */ +#define MIPS_CONF_MT (_ULCAST_(7) << 7) +#define MIPS_CONF_AR (_ULCAST_(7) << 10) +#define MIPS_CONF_AT (_ULCAST_(3) << 13) +#define MIPS_CONF_M (_ULCAST_(1) << 31) + +/* + * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above. + */ +#define MIPS_CONF1_FP (_ULCAST_(1) << 0) +#define MIPS_CONF1_EP (_ULCAST_(1) << 1) +#define MIPS_CONF1_CA (_ULCAST_(1) << 2) +#define MIPS_CONF1_WR (_ULCAST_(1) << 3) +#define MIPS_CONF1_PC (_ULCAST_(1) << 4) +#define MIPS_CONF1_MD (_ULCAST_(1) << 5) +#define MIPS_CONF1_C2 (_ULCAST_(1) << 6) +#define MIPS_CONF1_DA (_ULCAST_(7) << 7) +#define MIPS_CONF1_DL (_ULCAST_(7) << 10) +#define MIPS_CONF1_DS (_ULCAST_(7) << 13) +#define MIPS_CONF1_IA (_ULCAST_(7) << 16) +#define MIPS_CONF1_IL (_ULCAST_(7) << 19) +#define MIPS_CONF1_IS (_ULCAST_(7) << 22) +#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25) + +#define MIPS_CONF2_SA (_ULCAST_(15)<< 0) +#define MIPS_CONF2_SL (_ULCAST_(15)<< 4) +#define MIPS_CONF2_SS (_ULCAST_(15)<< 8) +#define MIPS_CONF2_SU (_ULCAST_(15)<< 12) +#define MIPS_CONF2_TA (_ULCAST_(15)<< 16) +#define MIPS_CONF2_TL (_ULCAST_(15)<< 20) +#define MIPS_CONF2_TS (_ULCAST_(15)<< 24) +#define MIPS_CONF2_TU (_ULCAST_(7) << 28) + +#define MIPS_CONF3_TL (_ULCAST_(1) << 0) +#define MIPS_CONF3_SM (_ULCAST_(1) << 1) +#define MIPS_CONF3_MT (_ULCAST_(1) << 2) +#define MIPS_CONF3_SP (_ULCAST_(1) << 4) +#define MIPS_CONF3_VINT (_ULCAST_(1) << 5) +#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6) +#define MIPS_CONF3_LPA (_ULCAST_(1) << 7) +#define MIPS_CONF3_DSP (_ULCAST_(1) << 10) +#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13) + +#define MIPS_CONF7_WII (_ULCAST_(1) << 31) + +#define MIPS_CONF7_RPS (_ULCAST_(1) << 2) + + +/* + * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register. + */ +#define MIPS_FPIR_S (_ULCAST_(1) << 16) +#define MIPS_FPIR_D (_ULCAST_(1) << 17) +#define MIPS_FPIR_PS (_ULCAST_(1) << 18) +#define MIPS_FPIR_3D (_ULCAST_(1) << 19) +#define MIPS_FPIR_W (_ULCAST_(1) << 20) +#define MIPS_FPIR_L (_ULCAST_(1) << 21) +#define MIPS_FPIR_F64 (_ULCAST_(1) << 22) + +#ifndef __ASSEMBLY__ + +/* + * Functions to access the R10000 performance counters. These are basically + * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit + * performance counter number encoded into bits 1 ... 5 of the instruction. + * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware + * disassembler these will look like an access to sel 0 or 1. + */ +#define read_r10k_perf_cntr(counter) \ +({ \ + unsigned int __res; \ + __asm__ __volatile__( \ + "mfpc\t%0, %1" \ + : "=r" (__res) \ + : "i" (counter)); \ + \ + __res; \ +}) + +#define write_r10k_perf_cntr(counter,val) \ +do { \ + __asm__ __volatile__( \ + "mtpc\t%0, %1" \ + : \ + : "r" (val), "i" (counter)); \ +} while (0) + +#define read_r10k_perf_event(counter) \ +({ \ + unsigned int __res; \ + __asm__ __volatile__( \ + "mfps\t%0, %1" \ + : "=r" (__res) \ + : "i" (counter)); \ + \ + __res; \ +}) + +#define write_r10k_perf_cntl(counter,val) \ +do { \ + __asm__ __volatile__( \ + "mtps\t%0, %1" \ + : \ + : "r" (val), "i" (counter)); \ +} while (0) + + +/* + * Macros to access the system control coprocessor + */ + +#define __read_32bit_c0_register(source, sel) \ +({ int __res; \ + if (sel == 0) \ + __asm__ __volatile__( \ + "mfc0\t%0, " #source "\n\t" \ + : "=r" (__res)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips32\n\t" \ + "mfc0\t%0, " #source ", " #sel "\n\t" \ + ".set\tmips0\n\t" \ + : "=r" (__res)); \ + __res; \ +}) + +#define __read_64bit_c0_register(source, sel) \ +({ unsigned long long __res; \ + if (sizeof(unsigned long) == 4) \ + __res = __read_64bit_c0_split(source, sel); \ + else if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips3\n\t" \ + "dmfc0\t%0, " #source "\n\t" \ + ".set\tmips0" \ + : "=r" (__res)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmfc0\t%0, " #source ", " #sel "\n\t" \ + ".set\tmips0" \ + : "=r" (__res)); \ + __res; \ +}) + +#define __write_32bit_c0_register(register, sel, value) \ +do { \ + if (sel == 0) \ + __asm__ __volatile__( \ + "mtc0\t%z0, " #register "\n\t" \ + : : "Jr" ((unsigned int)(value))); \ + else \ + __asm__ __volatile__( \ + ".set\tmips32\n\t" \ + "mtc0\t%z0, " #register ", " #sel "\n\t" \ + ".set\tmips0" \ + : : "Jr" ((unsigned int)(value))); \ +} while (0) + +#define __write_64bit_c0_register(register, sel, value) \ +do { \ + if (sizeof(unsigned long) == 4) \ + __write_64bit_c0_split(register, sel, value); \ + else if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips3\n\t" \ + "dmtc0\t%z0, " #register "\n\t" \ + ".set\tmips0" \ + : : "Jr" (value)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmtc0\t%z0, " #register ", " #sel "\n\t" \ + ".set\tmips0" \ + : : "Jr" (value)); \ +} while (0) + +#define __read_ulong_c0_register(reg, sel) \ + ((sizeof(unsigned long) == 4) ? \ + (unsigned long) __read_32bit_c0_register(reg, sel) : \ + (unsigned long) __read_64bit_c0_register(reg, sel)) + +#define __write_ulong_c0_register(reg, sel, val) \ +do { \ + if (sizeof(unsigned long) == 4) \ + __write_32bit_c0_register(reg, sel, val); \ + else \ + __write_64bit_c0_register(reg, sel, val); \ +} while (0) + +/* + * On RM7000/RM9000 these are uses to access cop0 set 1 registers + */ +#define __read_32bit_c0_ctrl_register(source) \ +({ int __res; \ + __asm__ __volatile__( \ + "cfc0\t%0, " #source "\n\t" \ + : "=r" (__res)); \ + __res; \ +}) + +#define __write_32bit_c0_ctrl_register(register, value) \ +do { \ + __asm__ __volatile__( \ + "ctc0\t%z0, " #register "\n\t" \ + : : "Jr" ((unsigned int)(value))); \ +} while (0) + +/* + * These versions are only needed for systems with more than 38 bits of + * physical address space running the 32-bit kernel. That's none atm :-) + */ +#define __read_64bit_c0_split(source, sel) \ +({ \ + unsigned long long __val; \ + unsigned long __flags; \ + \ + local_irq_save(__flags); \ + if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmfc0\t%M0, " #source "\n\t" \ + "dsll\t%L0, %M0, 32\n\t" \ + "dsrl\t%M0, %M0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + ".set\tmips0" \ + : "=r" (__val)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmfc0\t%M0, " #source ", " #sel "\n\t" \ + "dsll\t%L0, %M0, 32\n\t" \ + "dsrl\t%M0, %M0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + ".set\tmips0" \ + : "=r" (__val)); \ + local_irq_restore(__flags); \ + \ + __val; \ +}) + +#define __write_64bit_c0_split(source, sel, val) \ +do { \ + unsigned long __flags; \ + \ + local_irq_save(__flags); \ + if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dsll\t%L0, %L0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + "dsll\t%M0, %M0, 32\n\t" \ + "or\t%L0, %L0, %M0\n\t" \ + "dmtc0\t%L0, " #source "\n\t" \ + ".set\tmips0" \ + : : "r" (val)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dsll\t%L0, %L0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + "dsll\t%M0, %M0, 32\n\t" \ + "or\t%L0, %L0, %M0\n\t" \ + "dmtc0\t%L0, " #source ", " #sel "\n\t" \ + ".set\tmips0" \ + : : "r" (val)); \ + local_irq_restore(__flags); \ +} while (0) + +#define read_c0_index() __read_32bit_c0_register($0, 0) +#define write_c0_index(val) __write_32bit_c0_register($0, 0, val) + +#define read_c0_random() __read_32bit_c0_register($1, 0) +#define write_c0_random(val) __write_32bit_c0_register($1, 0, val) + +#define read_c0_entrylo0() __read_ulong_c0_register($2, 0) +#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val) + +#define read_c0_entrylo1() __read_ulong_c0_register($3, 0) +#define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val) + +#define read_c0_conf() __read_32bit_c0_register($3, 0) +#define write_c0_conf(val) __write_32bit_c0_register($3, 0, val) + +#define read_c0_context() __read_ulong_c0_register($4, 0) +#define write_c0_context(val) __write_ulong_c0_register($4, 0, val) + +#define read_c0_userlocal() __read_ulong_c0_register($4, 2) +#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val) + +#define read_c0_pagemask() __read_32bit_c0_register($5, 0) +#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val) + +#define read_c0_wired() __read_32bit_c0_register($6, 0) +#define write_c0_wired(val) __write_32bit_c0_register($6, 0, val) + +#define read_c0_info() __read_32bit_c0_register($7, 0) + +#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */ +#define write_c0_cache(val) __write_32bit_c0_register($7, 0, val) + +#define read_c0_badvaddr() __read_ulong_c0_register($8, 0) +#define write_c0_badvaddr(val) __write_ulong_c0_register($8, 0, val) + +#define read_c0_count() __read_32bit_c0_register($9, 0) +#define write_c0_count(val) __write_32bit_c0_register($9, 0, val) + +#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */ +#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val) + +#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */ +#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val) + +#define read_c0_entryhi() __read_ulong_c0_register($10, 0) +#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val) + +#define read_c0_compare() __read_32bit_c0_register($11, 0) +#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val) + +#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */ +#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val) + +#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */ +#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val) + +#define read_c0_status() __read_32bit_c0_register($12, 0) +#ifdef CONFIG_MIPS_MT_SMTC +#define write_c0_status(val) \ +do { \ + __write_32bit_c0_register($12, 0, val); \ + __ehb(); \ +} while (0) +#else +/* + * Legacy non-SMTC code, which may be hazardous + * but which might not support EHB + */ +#define write_c0_status(val) __write_32bit_c0_register($12, 0, val) +#endif /* CONFIG_MIPS_MT_SMTC */ + +#define read_c0_cause() __read_32bit_c0_register($13, 0) +#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val) + +#define read_c0_epc() __read_ulong_c0_register($14, 0) +#define write_c0_epc(val) __write_ulong_c0_register($14, 0, val) + +#define read_c0_prid() __read_32bit_c0_register($15, 0) + +#define read_c0_config() __read_32bit_c0_register($16, 0) +#define read_c0_config1() __read_32bit_c0_register($16, 1) +#define read_c0_config2() __read_32bit_c0_register($16, 2) +#define read_c0_config3() __read_32bit_c0_register($16, 3) +#define read_c0_config4() __read_32bit_c0_register($16, 4) +#define read_c0_config5() __read_32bit_c0_register($16, 5) +#define read_c0_config6() __read_32bit_c0_register($16, 6) +#define read_c0_config7() __read_32bit_c0_register($16, 7) +#define write_c0_config(val) __write_32bit_c0_register($16, 0, val) +#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val) +#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val) +#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val) +#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val) +#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val) +#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val) +#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val) + +/* + * The WatchLo register. There may be upto 8 of them. + */ +#define read_c0_watchlo0() __read_ulong_c0_register($18, 0) +#define read_c0_watchlo1() __read_ulong_c0_register($18, 1) +#define read_c0_watchlo2() __read_ulong_c0_register($18, 2) +#define read_c0_watchlo3() __read_ulong_c0_register($18, 3) +#define read_c0_watchlo4() __read_ulong_c0_register($18, 4) +#define read_c0_watchlo5() __read_ulong_c0_register($18, 5) +#define read_c0_watchlo6() __read_ulong_c0_register($18, 6) +#define read_c0_watchlo7() __read_ulong_c0_register($18, 7) +#define write_c0_watchlo0(val) __write_ulong_c0_register($18, 0, val) +#define write_c0_watchlo1(val) __write_ulong_c0_register($18, 1, val) +#define write_c0_watchlo2(val) __write_ulong_c0_register($18, 2, val) +#define write_c0_watchlo3(val) __write_ulong_c0_register($18, 3, val) +#define write_c0_watchlo4(val) __write_ulong_c0_register($18, 4, val) +#define write_c0_watchlo5(val) __write_ulong_c0_register($18, 5, val) +#define write_c0_watchlo6(val) __write_ulong_c0_register($18, 6, val) +#define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val) + +/* + * The WatchHi register. There may be upto 8 of them. + */ +#define read_c0_watchhi0() __read_32bit_c0_register($19, 0) +#define read_c0_watchhi1() __read_32bit_c0_register($19, 1) +#define read_c0_watchhi2() __read_32bit_c0_register($19, 2) +#define read_c0_watchhi3() __read_32bit_c0_register($19, 3) +#define read_c0_watchhi4() __read_32bit_c0_register($19, 4) +#define read_c0_watchhi5() __read_32bit_c0_register($19, 5) +#define read_c0_watchhi6() __read_32bit_c0_register($19, 6) +#define read_c0_watchhi7() __read_32bit_c0_register($19, 7) + +#define write_c0_watchhi0(val) __write_32bit_c0_register($19, 0, val) +#define write_c0_watchhi1(val) __write_32bit_c0_register($19, 1, val) +#define write_c0_watchhi2(val) __write_32bit_c0_register($19, 2, val) +#define write_c0_watchhi3(val) __write_32bit_c0_register($19, 3, val) +#define write_c0_watchhi4(val) __write_32bit_c0_register($19, 4, val) +#define write_c0_watchhi5(val) __write_32bit_c0_register($19, 5, val) +#define write_c0_watchhi6(val) __write_32bit_c0_register($19, 6, val) +#define write_c0_watchhi7(val) __write_32bit_c0_register($19, 7, val) + +#define read_c0_xcontext() __read_ulong_c0_register($20, 0) +#define write_c0_xcontext(val) __write_ulong_c0_register($20, 0, val) + +#define read_c0_intcontrol() __read_32bit_c0_ctrl_register($20) +#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val) + +#define read_c0_framemask() __read_32bit_c0_register($21, 0) +#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val) + +/* RM9000 PerfControl performance counter control register */ +#define read_c0_perfcontrol() __read_32bit_c0_register($22, 0) +#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val) + +#define read_c0_diag() __read_32bit_c0_register($22, 0) +#define write_c0_diag(val) __write_32bit_c0_register($22, 0, val) + +#define read_c0_diag1() __read_32bit_c0_register($22, 1) +#define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val) + +#define read_c0_diag2() __read_32bit_c0_register($22, 2) +#define write_c0_diag2(val) __write_32bit_c0_register($22, 2, val) + +#define read_c0_diag3() __read_32bit_c0_register($22, 3) +#define write_c0_diag3(val) __write_32bit_c0_register($22, 3, val) + +#define read_c0_diag4() __read_32bit_c0_register($22, 4) +#define write_c0_diag4(val) __write_32bit_c0_register($22, 4, val) + +#define read_c0_diag5() __read_32bit_c0_register($22, 5) +#define write_c0_diag5(val) __write_32bit_c0_register($22, 5, val) + +#define read_c0_debug() __read_32bit_c0_register($23, 0) +#define write_c0_debug(val) __write_32bit_c0_register($23, 0, val) + +#define read_c0_depc() __read_ulong_c0_register($24, 0) +#define write_c0_depc(val) __write_ulong_c0_register($24, 0, val) + +/* + * MIPS32 / MIPS64 performance counters + */ +#define read_c0_perfctrl0() __read_32bit_c0_register($25, 0) +#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val) +#define read_c0_perfcntr0() __read_32bit_c0_register($25, 1) +#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val) +#define read_c0_perfctrl1() __read_32bit_c0_register($25, 2) +#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val) +#define read_c0_perfcntr1() __read_32bit_c0_register($25, 3) +#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val) +#define read_c0_perfctrl2() __read_32bit_c0_register($25, 4) +#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val) +#define read_c0_perfcntr2() __read_32bit_c0_register($25, 5) +#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val) +#define read_c0_perfctrl3() __read_32bit_c0_register($25, 6) +#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val) +#define read_c0_perfcntr3() __read_32bit_c0_register($25, 7) +#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val) + +/* RM9000 PerfCount performance counter register */ +#define read_c0_perfcount() __read_64bit_c0_register($25, 0) +#define write_c0_perfcount(val) __write_64bit_c0_register($25, 0, val) + +#define read_c0_ecc() __read_32bit_c0_register($26, 0) +#define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val) + +#define read_c0_derraddr0() __read_ulong_c0_register($26, 1) +#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val) + +#define read_c0_cacheerr() __read_32bit_c0_register($27, 0) + +#define read_c0_derraddr1() __read_ulong_c0_register($27, 1) +#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val) + +#define read_c0_taglo() __read_32bit_c0_register($28, 0) +#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val) + +#define read_c0_dtaglo() __read_32bit_c0_register($28, 2) +#define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val) + +#define read_c0_taghi() __read_32bit_c0_register($29, 0) +#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val) + +#define read_c0_errorepc() __read_ulong_c0_register($30, 0) +#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val) + +/* MIPSR2 */ +#define read_c0_hwrena() __read_32bit_c0_register($7, 0) +#define write_c0_hwrena(val) __write_32bit_c0_register($7, 0, val) + +#define read_c0_intctl() __read_32bit_c0_register($12, 1) +#define write_c0_intctl(val) __write_32bit_c0_register($12, 1, val) + +#define read_c0_srsctl() __read_32bit_c0_register($12, 2) +#define write_c0_srsctl(val) __write_32bit_c0_register($12, 2, val) + +#define read_c0_srsmap() __read_32bit_c0_register($12, 3) +#define write_c0_srsmap(val) __write_32bit_c0_register($12, 3, val) + +#define read_c0_ebase() __read_32bit_c0_register($15, 1) +#define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val) + +/* + * Macros to access the floating point coprocessor control registers + */ +#define read_32bit_cp1_register(source) \ +({ int __res; \ + __asm__ __volatile__( \ + ".set\tpush\n\t" \ + ".set\treorder\n\t" \ + "cfc1\t%0,"STR(source)"\n\t" \ + ".set\tpop" \ + : "=r" (__res)); \ + __res;}) + +#define rddsp(mask) \ +({ \ + unsigned int __res; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # rddsp $1, %x1 \n" \ + " .word 0x7c000cb8 | (%x1 << 16) \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__res) \ + : "i" (mask)); \ + __res; \ +}) + +#define wrdsp(val, mask) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # wrdsp $1, %x1 \n" \ + " .word 0x7c2004f8 | (%x1 << 11) \n" \ + " .set pop \n" \ + : \ + : "r" (val), "i" (mask)); \ +} while (0) + +#if 0 /* Need DSP ASE capable assembler ... */ +#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;}) +#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;}) +#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;}) +#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;}) + +#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;}) +#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;}) +#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;}) +#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;}) + +#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x)) +#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x)) +#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x)) +#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x)) + +#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x)) +#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x)) +#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x)) +#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x)) + +#else + +#define mfhi0() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac0 \n" \ + " .word 0x00000810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mfhi1() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac1 \n" \ + " .word 0x00200810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mfhi2() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac2 \n" \ + " .word 0x00400810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mfhi3() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac3 \n" \ + " .word 0x00600810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo0() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac0 \n" \ + " .word 0x00000812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo1() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac1 \n" \ + " .word 0x00200812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo2() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac2 \n" \ + " .word 0x00400812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo3() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac3 \n" \ + " .word 0x00600812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mthi0(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac0 \n" \ + " .word 0x00200011 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mthi1(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac1 \n" \ + " .word 0x00200811 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mthi2(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac2 \n" \ + " .word 0x00201011 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mthi3(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac3 \n" \ + " .word 0x00201811 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo0(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac0 \n" \ + " .word 0x00200013 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo1(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac1 \n" \ + " .word 0x00200813 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo2(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac2 \n" \ + " .word 0x00201013 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo3(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac3 \n" \ + " .word 0x00201813 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#endif + +/* + * TLB operations. + * + * It is responsibility of the caller to take care of any TLB hazards. + */ +static inline void tlb_probe(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbp\n\t" + ".set reorder"); +} + +static inline void tlb_read(void) +{ +#if MIPS34K_MISSED_ITLB_WAR + int res = 0; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set noat \n" + " .set mips32r2 \n" + " .word 0x41610001 # dvpe $1 \n" + " move %0, $1 \n" + " ehb \n" + " .set pop \n" + : "=r" (res)); + + instruction_hazard(); +#endif + + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbr\n\t" + ".set reorder"); + +#if MIPS34K_MISSED_ITLB_WAR + if ((res & _ULCAST_(1))) + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set noat \n" + " .set mips32r2 \n" + " .word 0x41600021 # evpe \n" + " ehb \n" + " .set pop \n"); +#endif +} + +static inline void tlb_write_indexed(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbwi\n\t" + ".set reorder"); +} + +static inline void tlb_write_random(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbwr\n\t" + ".set reorder"); +} + +/* + * Manipulate bits in a c0 register. + */ +#ifndef CONFIG_MIPS_MT_SMTC +/* + * SMTC Linux requires shutting-down microthread scheduling + * during CP0 register read-modify-write sequences. + */ +#define __BUILD_SET_C0(name) \ +static inline unsigned int \ +set_c0_##name(unsigned int set) \ +{ \ + unsigned int res; \ + \ + res = read_c0_##name(); \ + res |= set; \ + write_c0_##name(res); \ + \ + return res; \ +} \ + \ +static inline unsigned int \ +clear_c0_##name(unsigned int clear) \ +{ \ + unsigned int res; \ + \ + res = read_c0_##name(); \ + res &= ~clear; \ + write_c0_##name(res); \ + \ + return res; \ +} \ + \ +static inline unsigned int \ +change_c0_##name(unsigned int change, unsigned int new) \ +{ \ + unsigned int res; \ + \ + res = read_c0_##name(); \ + res &= ~change; \ + res |= (new & change); \ + write_c0_##name(res); \ + \ + return res; \ +} + +#else /* SMTC versions that manage MT scheduling */ + +#include <linux/irqflags.h> + +/* + * This is a duplicate of dmt() in mipsmtregs.h to avoid problems with + * header file recursion. + */ +static inline unsigned int __dmt(void) +{ + int res; + + __asm__ __volatile__( + " .set push \n" + " .set mips32r2 \n" + " .set noat \n" + " .word 0x41610BC1 # dmt $1 \n" + " ehb \n" + " move %0, $1 \n" + " .set pop \n" + : "=r" (res)); + + instruction_hazard(); + + return res; +} + +#define __VPECONTROL_TE_SHIFT 15 +#define __VPECONTROL_TE (1UL << __VPECONTROL_TE_SHIFT) + +#define __EMT_ENABLE __VPECONTROL_TE + +static inline void __emt(unsigned int previous) +{ + if ((previous & __EMT_ENABLE)) + __asm__ __volatile__( + " .set mips32r2 \n" + " .word 0x41600be1 # emt \n" + " ehb \n" + " .set mips0 \n"); +} + +static inline void __ehb(void) +{ + __asm__ __volatile__( + " .set mips32r2 \n" + " ehb \n" " .set mips0 \n"); +} + +/* + * Note that local_irq_save/restore affect TC-specific IXMT state, + * not Status.IE as in non-SMTC kernel. + */ + +#define __BUILD_SET_C0(name) \ +static inline unsigned int \ +set_c0_##name(unsigned int set) \ +{ \ + unsigned int res; \ + unsigned int omt; \ + unsigned long flags; \ + \ + local_irq_save(flags); \ + omt = __dmt(); \ + res = read_c0_##name(); \ + res |= set; \ + write_c0_##name(res); \ + __emt(omt); \ + local_irq_restore(flags); \ + \ + return res; \ +} \ + \ +static inline unsigned int \ +clear_c0_##name(unsigned int clear) \ +{ \ + unsigned int res; \ + unsigned int omt; \ + unsigned long flags; \ + \ + local_irq_save(flags); \ + omt = __dmt(); \ + res = read_c0_##name(); \ + res &= ~clear; \ + write_c0_##name(res); \ + __emt(omt); \ + local_irq_restore(flags); \ + \ + return res; \ +} \ + \ +static inline unsigned int \ +change_c0_##name(unsigned int change, unsigned int new) \ +{ \ + unsigned int res; \ + unsigned int omt; \ + unsigned long flags; \ + \ + local_irq_save(flags); \ + \ + omt = __dmt(); \ + res = read_c0_##name(); \ + res &= ~change; \ + res |= (new & change); \ + write_c0_##name(res); \ + __emt(omt); \ + local_irq_restore(flags); \ + \ + return res; \ +} +#endif + +__BUILD_SET_C0(status) +__BUILD_SET_C0(cause) +__BUILD_SET_C0(config) +__BUILD_SET_C0(intcontrol) +__BUILD_SET_C0(intctl) +__BUILD_SET_C0(srsmap) + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_MIPSREGS_H */ diff --git a/arch/mips/include/asm/mman.h b/arch/mips/include/asm/mman.h new file mode 100644 index 000000000000..e4d6f1fb1cf7 --- /dev/null +++ b/arch/mips/include/asm/mman.h @@ -0,0 +1,77 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999, 2002 by Ralf Baechle + */ +#ifndef _ASM_MMAN_H +#define _ASM_MMAN_H + +/* + * Protections are chosen from these bits, OR'd together. The + * implementation does not necessarily support PROT_EXEC or PROT_WRITE + * without PROT_READ. The only guarantees are that no writing will be + * allowed without PROT_WRITE and no access will be allowed for PROT_NONE. + */ +#define PROT_NONE 0x00 /* page can not be accessed */ +#define PROT_READ 0x01 /* page can be read */ +#define PROT_WRITE 0x02 /* page can be written */ +#define PROT_EXEC 0x04 /* page can be executed */ +/* 0x08 reserved for PROT_EXEC_NOFLUSH */ +#define PROT_SEM 0x10 /* page may be used for atomic ops */ +#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ +#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ + +/* + * Flags for mmap + */ +#define MAP_SHARED 0x001 /* Share changes */ +#define MAP_PRIVATE 0x002 /* Changes are private */ +#define MAP_TYPE 0x00f /* Mask for type of mapping */ +#define MAP_FIXED 0x010 /* Interpret addr exactly */ + +/* not used by linux, but here to make sure we don't clash with ABI defines */ +#define MAP_RENAME 0x020 /* Assign page to file */ +#define MAP_AUTOGROW 0x040 /* File may grow by writing */ +#define MAP_LOCAL 0x080 /* Copy on fork/sproc */ +#define MAP_AUTORSRV 0x100 /* Logical swap reserved on demand */ + +/* These are linux-specific */ +#define MAP_NORESERVE 0x0400 /* don't check for reservations */ +#define MAP_ANONYMOUS 0x0800 /* don't use a file */ +#define MAP_GROWSDOWN 0x1000 /* stack-like segment */ +#define MAP_DENYWRITE 0x2000 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x4000 /* mark it as an executable */ +#define MAP_LOCKED 0x8000 /* pages are locked */ +#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x20000 /* do not block on IO */ + +/* + * Flags for msync + */ +#define MS_ASYNC 0x0001 /* sync memory asynchronously */ +#define MS_INVALIDATE 0x0002 /* invalidate mappings & caches */ +#define MS_SYNC 0x0004 /* synchronous memory sync */ + +/* + * Flags for mlockall + */ +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#define MADV_NORMAL 0 /* no further special treatment */ +#define MADV_RANDOM 1 /* expect random page references */ +#define MADV_SEQUENTIAL 2 /* expect sequential page references */ +#define MADV_WILLNEED 3 /* will need these pages */ +#define MADV_DONTNEED 4 /* don't need these pages */ + +/* common parameters: try to keep these consistent across architectures */ +#define MADV_REMOVE 9 /* remove these pages & resources */ +#define MADV_DONTFORK 10 /* don't inherit across fork */ +#define MADV_DOFORK 11 /* do inherit across fork */ + +/* compatibility flags */ +#define MAP_FILE 0 + +#endif /* _ASM_MMAN_H */ diff --git a/arch/mips/include/asm/mmu.h b/arch/mips/include/asm/mmu.h new file mode 100644 index 000000000000..4063edd79623 --- /dev/null +++ b/arch/mips/include/asm/mmu.h @@ -0,0 +1,6 @@ +#ifndef __ASM_MMU_H +#define __ASM_MMU_H + +typedef unsigned long mm_context_t[NR_CPUS]; + +#endif /* __ASM_MMU_H */ diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h new file mode 100644 index 000000000000..d7f3eb03ad12 --- /dev/null +++ b/arch/mips/include/asm/mmu_context.h @@ -0,0 +1,297 @@ +/* + * Switch a MMU context. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1997, 1998, 1999 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_MMU_CONTEXT_H +#define _ASM_MMU_CONTEXT_H + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> +#ifdef CONFIG_MIPS_MT_SMTC +#include <asm/mipsmtregs.h> +#include <asm/smtc.h> +#endif /* SMTC */ +#include <asm-generic/mm_hooks.h> + +/* + * For the fast tlb miss handlers, we keep a per cpu array of pointers + * to the current pgd for each processor. Also, the proc. id is stuffed + * into the context register. + */ +extern unsigned long pgd_current[]; + +#define TLBMISS_HANDLER_SETUP_PGD(pgd) \ + pgd_current[smp_processor_id()] = (unsigned long)(pgd) + +#ifdef CONFIG_32BIT +#define TLBMISS_HANDLER_SETUP() \ + write_c0_context((unsigned long) smp_processor_id() << 25); \ + TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) +#endif +#ifdef CONFIG_64BIT +#define TLBMISS_HANDLER_SETUP() \ + write_c0_context((unsigned long) smp_processor_id() << 26); \ + TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) +#endif + +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + +#define ASID_INC 0x40 +#define ASID_MASK 0xfc0 + +#elif defined(CONFIG_CPU_R8000) + +#define ASID_INC 0x10 +#define ASID_MASK 0xff0 + +#elif defined(CONFIG_CPU_RM9000) + +#define ASID_INC 0x1 +#define ASID_MASK 0xfff + +/* SMTC/34K debug hack - but maybe we'll keep it */ +#elif defined(CONFIG_MIPS_MT_SMTC) + +#define ASID_INC 0x1 +extern unsigned long smtc_asid_mask; +#define ASID_MASK (smtc_asid_mask) +#define HW_ASID_MASK 0xff +/* End SMTC/34K debug hack */ +#else /* FIXME: not correct for R6000 */ + +#define ASID_INC 0x1 +#define ASID_MASK 0xff + +#endif + +#define cpu_context(cpu, mm) ((mm)->context[cpu]) +#define cpu_asid(cpu, mm) (cpu_context((cpu), (mm)) & ASID_MASK) +#define asid_cache(cpu) (cpu_data[cpu].asid_cache) + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +/* + * All unused by hardware upper bits will be considered + * as a software asid extension. + */ +#define ASID_VERSION_MASK ((unsigned long)~(ASID_MASK|(ASID_MASK-1))) +#define ASID_FIRST_VERSION ((unsigned long)(~ASID_VERSION_MASK) + 1) + +#ifndef CONFIG_MIPS_MT_SMTC +/* Normal, classic MIPS get_new_mmu_context */ +static inline void +get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) +{ + unsigned long asid = asid_cache(cpu); + + if (! ((asid += ASID_INC) & ASID_MASK) ) { + if (cpu_has_vtag_icache) + flush_icache_all(); + local_flush_tlb_all(); /* start new asid cycle */ + if (!asid) /* fix version if needed */ + asid = ASID_FIRST_VERSION; + } + cpu_context(cpu, mm) = asid_cache(cpu) = asid; +} + +#else /* CONFIG_MIPS_MT_SMTC */ + +#define get_new_mmu_context(mm, cpu) smtc_get_new_mmu_context((mm), (cpu)) + +#endif /* CONFIG_MIPS_MT_SMTC */ + +/* + * Initialize the context related info for a new mm_struct + * instance. + */ +static inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + int i; + + for_each_online_cpu(i) + cpu_context(i, mm) = 0; + + return 0; +} + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + unsigned int cpu = smp_processor_id(); + unsigned long flags; +#ifdef CONFIG_MIPS_MT_SMTC + unsigned long oldasid; + unsigned long mtflags; + int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id; + local_irq_save(flags); + mtflags = dvpe(); +#else /* Not SMTC */ + local_irq_save(flags); +#endif /* CONFIG_MIPS_MT_SMTC */ + + /* Check if our ASID is of an older version and thus invalid */ + if ((cpu_context(cpu, next) ^ asid_cache(cpu)) & ASID_VERSION_MASK) + get_new_mmu_context(next, cpu); +#ifdef CONFIG_MIPS_MT_SMTC + /* + * If the EntryHi ASID being replaced happens to be + * the value flagged at ASID recycling time as having + * an extended life, clear the bit showing it being + * in use by this "CPU", and if that's the last bit, + * free up the ASID value for use and flush any old + * instances of it from the TLB. + */ + oldasid = (read_c0_entryhi() & ASID_MASK); + if(smtc_live_asid[mytlb][oldasid]) { + smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu); + if(smtc_live_asid[mytlb][oldasid] == 0) + smtc_flush_tlb_asid(oldasid); + } + /* + * Tread softly on EntryHi, and so long as we support + * having ASID_MASK smaller than the hardware maximum, + * make sure no "soft" bits become "hard"... + */ + write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) + | (cpu_context(cpu, next) & ASID_MASK)); + ehb(); /* Make sure it propagates to TCStatus */ + evpe(mtflags); +#else + write_c0_entryhi(cpu_context(cpu, next)); +#endif /* CONFIG_MIPS_MT_SMTC */ + TLBMISS_HANDLER_SETUP_PGD(next->pgd); + + /* + * Mark current->active_mm as not "active" anymore. + * We don't want to mislead possible IPI tlb flush routines. + */ + cpu_clear(cpu, prev->cpu_vm_mask); + cpu_set(cpu, next->cpu_vm_mask); + + local_irq_restore(flags); +} + +/* + * Destroy context related info for an mm_struct that is about + * to be put to rest. + */ +static inline void destroy_context(struct mm_struct *mm) +{ +} + +#define deactivate_mm(tsk, mm) do { } while (0) + +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +static inline void +activate_mm(struct mm_struct *prev, struct mm_struct *next) +{ + unsigned long flags; + unsigned int cpu = smp_processor_id(); + +#ifdef CONFIG_MIPS_MT_SMTC + unsigned long oldasid; + unsigned long mtflags; + int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id; +#endif /* CONFIG_MIPS_MT_SMTC */ + + local_irq_save(flags); + + /* Unconditionally get a new ASID. */ + get_new_mmu_context(next, cpu); + +#ifdef CONFIG_MIPS_MT_SMTC + /* See comments for similar code above */ + mtflags = dvpe(); + oldasid = read_c0_entryhi() & ASID_MASK; + if(smtc_live_asid[mytlb][oldasid]) { + smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu); + if(smtc_live_asid[mytlb][oldasid] == 0) + smtc_flush_tlb_asid(oldasid); + } + /* See comments for similar code above */ + write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) | + (cpu_context(cpu, next) & ASID_MASK)); + ehb(); /* Make sure it propagates to TCStatus */ + evpe(mtflags); +#else + write_c0_entryhi(cpu_context(cpu, next)); +#endif /* CONFIG_MIPS_MT_SMTC */ + TLBMISS_HANDLER_SETUP_PGD(next->pgd); + + /* mark mmu ownership change */ + cpu_clear(cpu, prev->cpu_vm_mask); + cpu_set(cpu, next->cpu_vm_mask); + + local_irq_restore(flags); +} + +/* + * If mm is currently active_mm, we can't really drop it. Instead, + * we will get a new one for it. + */ +static inline void +drop_mmu_context(struct mm_struct *mm, unsigned cpu) +{ + unsigned long flags; +#ifdef CONFIG_MIPS_MT_SMTC + unsigned long oldasid; + /* Can't use spinlock because called from TLB flush within DVPE */ + unsigned int prevvpe; + int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id; +#endif /* CONFIG_MIPS_MT_SMTC */ + + local_irq_save(flags); + + if (cpu_isset(cpu, mm->cpu_vm_mask)) { + get_new_mmu_context(mm, cpu); +#ifdef CONFIG_MIPS_MT_SMTC + /* See comments for similar code above */ + prevvpe = dvpe(); + oldasid = (read_c0_entryhi() & ASID_MASK); + if (smtc_live_asid[mytlb][oldasid]) { + smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu); + if(smtc_live_asid[mytlb][oldasid] == 0) + smtc_flush_tlb_asid(oldasid); + } + /* See comments for similar code above */ + write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) + | cpu_asid(cpu, mm)); + ehb(); /* Make sure it propagates to TCStatus */ + evpe(prevvpe); +#else /* not CONFIG_MIPS_MT_SMTC */ + write_c0_entryhi(cpu_asid(cpu, mm)); +#endif /* CONFIG_MIPS_MT_SMTC */ + } else { + /* will get a new context next time */ +#ifndef CONFIG_MIPS_MT_SMTC + cpu_context(cpu, mm) = 0; +#else /* SMTC */ + int i; + + /* SMTC shares the TLB (and ASIDs) across VPEs */ + for_each_online_cpu(i) { + if((smtc_status & SMTC_TLB_SHARED) + || (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id)) + cpu_context(i, mm) = 0; + } +#endif /* CONFIG_MIPS_MT_SMTC */ + } + local_irq_restore(flags); +} + +#endif /* _ASM_MMU_CONTEXT_H */ diff --git a/arch/mips/include/asm/mmzone.h b/arch/mips/include/asm/mmzone.h new file mode 100644 index 000000000000..f53ec54c92ff --- /dev/null +++ b/arch/mips/include/asm/mmzone.h @@ -0,0 +1,17 @@ +/* + * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99 + * Rewritten for Linux 2.6 by Christoph Hellwig (hch@lst.de) Jan 2004 + */ +#ifndef _ASM_MMZONE_H_ +#define _ASM_MMZONE_H_ + +#include <asm/page.h> +#include <mmzone.h> + +#ifdef CONFIG_DISCONTIGMEM + +#define pfn_to_nid(pfn) pa_to_nid((pfn) << PAGE_SHIFT) + +#endif /* CONFIG_DISCONTIGMEM */ + +#endif /* _ASM_MMZONE_H_ */ diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h new file mode 100644 index 000000000000..de6d09ebbd80 --- /dev/null +++ b/arch/mips/include/asm/module.h @@ -0,0 +1,136 @@ +#ifndef _ASM_MODULE_H +#define _ASM_MODULE_H + +#include <linux/list.h> +#include <asm/uaccess.h> + +struct mod_arch_specific { + /* Data Bus Error exception tables */ + struct list_head dbe_list; + const struct exception_table_entry *dbe_start; + const struct exception_table_entry *dbe_end; +}; + +typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */ + +typedef struct { + Elf64_Addr r_offset; /* Address of relocation. */ + Elf64_Word r_sym; /* Symbol index. */ + Elf64_Byte r_ssym; /* Special symbol. */ + Elf64_Byte r_type3; /* Third relocation. */ + Elf64_Byte r_type2; /* Second relocation. */ + Elf64_Byte r_type; /* First relocation. */ +} Elf64_Mips_Rel; + +typedef struct { + Elf64_Addr r_offset; /* Address of relocation. */ + Elf64_Word r_sym; /* Symbol index. */ + Elf64_Byte r_ssym; /* Special symbol. */ + Elf64_Byte r_type3; /* Third relocation. */ + Elf64_Byte r_type2; /* Second relocation. */ + Elf64_Byte r_type; /* First relocation. */ + Elf64_Sxword r_addend; /* Addend. */ +} Elf64_Mips_Rela; + +#ifdef CONFIG_32BIT + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr +#define Elf_Addr Elf32_Addr + +#define Elf_Mips_Rel Elf32_Rel +#define Elf_Mips_Rela Elf32_Rela + +#define ELF_MIPS_R_SYM(rel) ELF32_R_SYM(rel.r_info) +#define ELF_MIPS_R_TYPE(rel) ELF32_R_TYPE(rel.r_info) + +#endif + +#ifdef CONFIG_64BIT + +#define Elf_Shdr Elf64_Shdr +#define Elf_Sym Elf64_Sym +#define Elf_Ehdr Elf64_Ehdr +#define Elf_Addr Elf64_Addr + +#define Elf_Mips_Rel Elf64_Mips_Rel +#define Elf_Mips_Rela Elf64_Mips_Rela + +#define ELF_MIPS_R_SYM(rel) (rel.r_sym) +#define ELF_MIPS_R_TYPE(rel) (rel.r_type) + +#endif + +#ifdef CONFIG_MODULES +/* Given an address, look for it in the exception tables. */ +const struct exception_table_entry*search_module_dbetables(unsigned long addr); +#else +/* Given an address, look for it in the exception tables. */ +static inline const struct exception_table_entry * +search_module_dbetables(unsigned long addr) +{ + return NULL; +} +#endif + +#ifdef CONFIG_CPU_MIPS32_R1 +#define MODULE_PROC_FAMILY "MIPS32_R1 " +#elif defined CONFIG_CPU_MIPS32_R2 +#define MODULE_PROC_FAMILY "MIPS32_R2 " +#elif defined CONFIG_CPU_MIPS64_R1 +#define MODULE_PROC_FAMILY "MIPS64_R1 " +#elif defined CONFIG_CPU_MIPS64_R2 +#define MODULE_PROC_FAMILY "MIPS64_R2 " +#elif defined CONFIG_CPU_R3000 +#define MODULE_PROC_FAMILY "R3000 " +#elif defined CONFIG_CPU_TX39XX +#define MODULE_PROC_FAMILY "TX39XX " +#elif defined CONFIG_CPU_VR41XX +#define MODULE_PROC_FAMILY "VR41XX " +#elif defined CONFIG_CPU_R4300 +#define MODULE_PROC_FAMILY "R4300 " +#elif defined CONFIG_CPU_R4X00 +#define MODULE_PROC_FAMILY "R4X00 " +#elif defined CONFIG_CPU_TX49XX +#define MODULE_PROC_FAMILY "TX49XX " +#elif defined CONFIG_CPU_R5000 +#define MODULE_PROC_FAMILY "R5000 " +#elif defined CONFIG_CPU_R5432 +#define MODULE_PROC_FAMILY "R5432 " +#elif defined CONFIG_CPU_R6000 +#define MODULE_PROC_FAMILY "R6000 " +#elif defined CONFIG_CPU_NEVADA +#define MODULE_PROC_FAMILY "NEVADA " +#elif defined CONFIG_CPU_R8000 +#define MODULE_PROC_FAMILY "R8000 " +#elif defined CONFIG_CPU_R10000 +#define MODULE_PROC_FAMILY "R10000 " +#elif defined CONFIG_CPU_RM7000 +#define MODULE_PROC_FAMILY "RM7000 " +#elif defined CONFIG_CPU_RM9000 +#define MODULE_PROC_FAMILY "RM9000 " +#elif defined CONFIG_CPU_SB1 +#define MODULE_PROC_FAMILY "SB1 " +#elif defined CONFIG_CPU_LOONGSON2 +#define MODULE_PROC_FAMILY "LOONGSON2 " +#else +#error MODULE_PROC_FAMILY undefined for your processor configuration +#endif + +#ifdef CONFIG_32BIT +#define MODULE_KERNEL_TYPE "32BIT " +#elif defined CONFIG_64BIT +#define MODULE_KERNEL_TYPE "64BIT " +#endif + +#ifdef CONFIG_MIPS_MT_SMTC +#define MODULE_KERNEL_SMTC "MT_SMTC " +#else +#define MODULE_KERNEL_SMTC "" +#endif + +#define MODULE_ARCH_VERMAGIC \ + MODULE_PROC_FAMILY MODULE_KERNEL_TYPE MODULE_KERNEL_SMTC + +#endif /* _ASM_MODULE_H */ diff --git a/arch/mips/include/asm/msc01_ic.h b/arch/mips/include/asm/msc01_ic.h new file mode 100644 index 000000000000..7989b9ffc1d2 --- /dev/null +++ b/arch/mips/include/asm/msc01_ic.h @@ -0,0 +1,148 @@ +/* + * PCI Register definitions for the MIPS System Controller. + * + * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ASM_MIPS_BOARDS_MSC01_IC_H +#define __ASM_MIPS_BOARDS_MSC01_IC_H + +/***************************************************************************** + * Register offset addresses + *****************************************************************************/ + +#define MSC01_IC_RST_OFS 0x00008 /* Software reset */ +#define MSC01_IC_ENAL_OFS 0x00100 /* Int_in enable mask 31:0 */ +#define MSC01_IC_ENAH_OFS 0x00108 /* Int_in enable mask 63:32 */ +#define MSC01_IC_DISL_OFS 0x00120 /* Int_in disable mask 31:0 */ +#define MSC01_IC_DISH_OFS 0x00128 /* Int_in disable mask 63:32 */ +#define MSC01_IC_ISBL_OFS 0x00140 /* Raw int_in 31:0 */ +#define MSC01_IC_ISBH_OFS 0x00148 /* Raw int_in 63:32 */ +#define MSC01_IC_ISAL_OFS 0x00160 /* Masked int_in 31:0 */ +#define MSC01_IC_ISAH_OFS 0x00168 /* Masked int_in 63:32 */ +#define MSC01_IC_LVL_OFS 0x00180 /* Disable priority int_out */ +#define MSC01_IC_RAMW_OFS 0x00180 /* Shadow set RAM (EI) */ +#define MSC01_IC_OSB_OFS 0x00188 /* Raw int_out */ +#define MSC01_IC_OSA_OFS 0x00190 /* Masked int_out */ +#define MSC01_IC_GENA_OFS 0x00198 /* Global HW int enable */ +#define MSC01_IC_BASE_OFS 0x001a0 /* Base address of IC_VEC */ +#define MSC01_IC_VEC_OFS 0x001b0 /* Active int's vector address */ +#define MSC01_IC_EOI_OFS 0x001c0 /* Enable lower level ints */ +#define MSC01_IC_CFG_OFS 0x001c8 /* Configuration register */ +#define MSC01_IC_TRLD_OFS 0x001d0 /* Interval timer reload val */ +#define MSC01_IC_TVAL_OFS 0x001e0 /* Interval timer current val */ +#define MSC01_IC_TCFG_OFS 0x001f0 /* Interval timer config */ +#define MSC01_IC_SUP_OFS 0x00200 /* Set up int_in line 0 */ +#define MSC01_IC_ENA_OFS 0x00800 /* Int_in enable mask 63:0 */ +#define MSC01_IC_DIS_OFS 0x00820 /* Int_in disable mask 63:0 */ +#define MSC01_IC_ISB_OFS 0x00840 /* Raw int_in 63:0 */ +#define MSC01_IC_ISA_OFS 0x00860 /* Masked int_in 63:0 */ + +/***************************************************************************** + * Register field encodings + *****************************************************************************/ + +#define MSC01_IC_RST_RST_SHF 0 +#define MSC01_IC_RST_RST_MSK 0x00000001 +#define MSC01_IC_RST_RST_BIT MSC01_IC_RST_RST_MSK +#define MSC01_IC_LVL_LVL_SHF 0 +#define MSC01_IC_LVL_LVL_MSK 0x000000ff +#define MSC01_IC_LVL_SPUR_SHF 16 +#define MSC01_IC_LVL_SPUR_MSK 0x00010000 +#define MSC01_IC_LVL_SPUR_BIT MSC01_IC_LVL_SPUR_MSK +#define MSC01_IC_RAMW_RIPL_SHF 0 +#define MSC01_IC_RAMW_RIPL_MSK 0x0000003f +#define MSC01_IC_RAMW_DATA_SHF 6 +#define MSC01_IC_RAMW_DATA_MSK 0x00000fc0 +#define MSC01_IC_RAMW_ADDR_SHF 25 +#define MSC01_IC_RAMW_ADDR_MSK 0x7e000000 +#define MSC01_IC_RAMW_READ_SHF 31 +#define MSC01_IC_RAMW_READ_MSK 0x80000000 +#define MSC01_IC_RAMW_READ_BIT MSC01_IC_RAMW_READ_MSK +#define MSC01_IC_OSB_OSB_SHF 0 +#define MSC01_IC_OSB_OSB_MSK 0x000000ff +#define MSC01_IC_OSA_OSA_SHF 0 +#define MSC01_IC_OSA_OSA_MSK 0x000000ff +#define MSC01_IC_GENA_GENA_SHF 0 +#define MSC01_IC_GENA_GENA_MSK 0x00000001 +#define MSC01_IC_GENA_GENA_BIT MSC01_IC_GENA_GENA_MSK +#define MSC01_IC_CFG_DIS_SHF 0 +#define MSC01_IC_CFG_DIS_MSK 0x00000001 +#define MSC01_IC_CFG_DIS_BIT MSC01_IC_CFG_DIS_MSK +#define MSC01_IC_CFG_SHFT_SHF 8 +#define MSC01_IC_CFG_SHFT_MSK 0x00000f00 +#define MSC01_IC_TCFG_ENA_SHF 0 +#define MSC01_IC_TCFG_ENA_MSK 0x00000001 +#define MSC01_IC_TCFG_ENA_BIT MSC01_IC_TCFG_ENA_MSK +#define MSC01_IC_TCFG_INT_SHF 8 +#define MSC01_IC_TCFG_INT_MSK 0x00000100 +#define MSC01_IC_TCFG_INT_BIT MSC01_IC_TCFG_INT_MSK +#define MSC01_IC_TCFG_EDGE_SHF 16 +#define MSC01_IC_TCFG_EDGE_MSK 0x00010000 +#define MSC01_IC_TCFG_EDGE_BIT MSC01_IC_TCFG_EDGE_MSK +#define MSC01_IC_SUP_PRI_SHF 0 +#define MSC01_IC_SUP_PRI_MSK 0x00000007 +#define MSC01_IC_SUP_EDGE_SHF 8 +#define MSC01_IC_SUP_EDGE_MSK 0x00000100 +#define MSC01_IC_SUP_EDGE_BIT MSC01_IC_SUP_EDGE_MSK +#define MSC01_IC_SUP_STEP 8 + +/* + * MIPS System controller interrupt register base. + * + */ + +/***************************************************************************** + * Absolute register addresses + *****************************************************************************/ + +#define MSC01_IC_RST (MSC01_IC_REG_BASE + MSC01_IC_RST_OFS) +#define MSC01_IC_ENAL (MSC01_IC_REG_BASE + MSC01_IC_ENAL_OFS) +#define MSC01_IC_ENAH (MSC01_IC_REG_BASE + MSC01_IC_ENAH_OFS) +#define MSC01_IC_DISL (MSC01_IC_REG_BASE + MSC01_IC_DISL_OFS) +#define MSC01_IC_DISH (MSC01_IC_REG_BASE + MSC01_IC_DISH_OFS) +#define MSC01_IC_ISBL (MSC01_IC_REG_BASE + MSC01_IC_ISBL_OFS) +#define MSC01_IC_ISBH (MSC01_IC_REG_BASE + MSC01_IC_ISBH_OFS) +#define MSC01_IC_ISAL (MSC01_IC_REG_BASE + MSC01_IC_ISAL_OFS) +#define MSC01_IC_ISAH (MSC01_IC_REG_BASE + MSC01_IC_ISAH_OFS) +#define MSC01_IC_LVL (MSC01_IC_REG_BASE + MSC01_IC_LVL_OFS) +#define MSC01_IC_RAMW (MSC01_IC_REG_BASE + MSC01_IC_RAMW_OFS) +#define MSC01_IC_OSB (MSC01_IC_REG_BASE + MSC01_IC_OSB_OFS) +#define MSC01_IC_OSA (MSC01_IC_REG_BASE + MSC01_IC_OSA_OFS) +#define MSC01_IC_GENA (MSC01_IC_REG_BASE + MSC01_IC_GENA_OFS) +#define MSC01_IC_BASE (MSC01_IC_REG_BASE + MSC01_IC_BASE_OFS) +#define MSC01_IC_VEC (MSC01_IC_REG_BASE + MSC01_IC_VEC_OFS) +#define MSC01_IC_EOI (MSC01_IC_REG_BASE + MSC01_IC_EOI_OFS) +#define MSC01_IC_CFG (MSC01_IC_REG_BASE + MSC01_IC_CFG_OFS) +#define MSC01_IC_TRLD (MSC01_IC_REG_BASE + MSC01_IC_TRLD_OFS) +#define MSC01_IC_TVAL (MSC01_IC_REG_BASE + MSC01_IC_TVAL_OFS) +#define MSC01_IC_TCFG (MSC01_IC_REG_BASE + MSC01_IC_TCFG_OFS) +#define MSC01_IC_SUP (MSC01_IC_REG_BASE + MSC01_IC_SUP_OFS) +#define MSC01_IC_ENA (MSC01_IC_REG_BASE + MSC01_IC_ENA_OFS) +#define MSC01_IC_DIS (MSC01_IC_REG_BASE + MSC01_IC_DIS_OFS) +#define MSC01_IC_ISB (MSC01_IC_REG_BASE + MSC01_IC_ISB_OFS) +#define MSC01_IC_ISA (MSC01_IC_REG_BASE + MSC01_IC_ISA_OFS) + +/* + * Soc-it interrupts are configurable. + * Every board describes its IRQ mapping with this table. + */ +typedef struct msc_irqmap { + int im_irq; + int im_type; + int im_lvl; +} msc_irqmap_t; + +/* im_type */ +#define MSC01_IRQ_LEVEL 0 +#define MSC01_IRQ_EDGE 1 + +extern void __init init_msc_irqs(unsigned long icubase, unsigned int base, msc_irqmap_t *imp, int nirq); +extern void ll_msc_irq(void); + +#endif /* __ASM_MIPS_BOARDS_MSC01_IC_H */ + diff --git a/arch/mips/include/asm/msgbuf.h b/arch/mips/include/asm/msgbuf.h new file mode 100644 index 000000000000..0d6c7f14de31 --- /dev/null +++ b/arch/mips/include/asm/msgbuf.h @@ -0,0 +1,47 @@ +#ifndef _ASM_MSGBUF_H +#define _ASM_MSGBUF_H + + +/* + * The msqid64_ds structure for the MIPS architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - extension of time_t to 64-bit on 32-bitsystem to solve the y2038 problem + * - 2 miscellaneous unsigned long values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; +#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN) + unsigned long __unused1; +#endif + __kernel_time_t msg_stime; /* last msgsnd time */ +#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN) + unsigned long __unused1; +#endif +#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN) + unsigned long __unused2; +#endif + __kernel_time_t msg_rtime; /* last msgrcv time */ +#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN) + unsigned long __unused2; +#endif +#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN) + unsigned long __unused3; +#endif + __kernel_time_t msg_ctime; /* last change time */ +#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN) + unsigned long __unused3; +#endif + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _ASM_MSGBUF_H */ diff --git a/arch/mips/include/asm/mutex.h b/arch/mips/include/asm/mutex.h new file mode 100644 index 000000000000..458c1f7fbc18 --- /dev/null +++ b/arch/mips/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include <asm-generic/mutex-dec.h> diff --git a/arch/mips/include/asm/nile4.h b/arch/mips/include/asm/nile4.h new file mode 100644 index 000000000000..c3ca959aa4d9 --- /dev/null +++ b/arch/mips/include/asm/nile4.h @@ -0,0 +1,310 @@ +/* + * asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions + * + * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> + * Sony Software Development Center Europe (SDCE), Brussels + * + * This file is based on the following documentation: + * + * NEC Vrc 5074 System Controller Data Sheet, June 1998 + */ + +#ifndef _ASM_NILE4_H +#define _ASM_NILE4_H + +#define NILE4_BASE 0xbfa00000 +#define NILE4_SIZE 0x00200000 /* 2 MB */ + + + /* + * Physical Device Address Registers (PDARs) + */ + +#define NILE4_SDRAM0 0x0000 /* SDRAM Bank 0 [R/W] */ +#define NILE4_SDRAM1 0x0008 /* SDRAM Bank 1 [R/W] */ +#define NILE4_DCS2 0x0010 /* Device Chip-Select 2 [R/W] */ +#define NILE4_DCS3 0x0018 /* Device Chip-Select 3 [R/W] */ +#define NILE4_DCS4 0x0020 /* Device Chip-Select 4 [R/W] */ +#define NILE4_DCS5 0x0028 /* Device Chip-Select 5 [R/W] */ +#define NILE4_DCS6 0x0030 /* Device Chip-Select 6 [R/W] */ +#define NILE4_DCS7 0x0038 /* Device Chip-Select 7 [R/W] */ +#define NILE4_DCS8 0x0040 /* Device Chip-Select 8 [R/W] */ +#define NILE4_PCIW0 0x0060 /* PCI Address Window 0 [R/W] */ +#define NILE4_PCIW1 0x0068 /* PCI Address Window 1 [R/W] */ +#define NILE4_INTCS 0x0070 /* Controller Internal Registers and Devices */ + /* [R/W] */ +#define NILE4_BOOTCS 0x0078 /* Boot ROM Chip-Select [R/W] */ + + + /* + * CPU Interface Registers + */ + +#define NILE4_CPUSTAT 0x0080 /* CPU Status [R/W] */ +#define NILE4_INTCTRL 0x0088 /* Interrupt Control [R/W] */ +#define NILE4_INTSTAT0 0x0090 /* Interrupt Status 0 [R] */ +#define NILE4_INTSTAT1 0x0098 /* Interrupt Status 1 and CPU Interrupt */ + /* Enable [R/W] */ +#define NILE4_INTCLR 0x00A0 /* Interrupt Clear [R/W] */ +#define NILE4_INTPPES 0x00A8 /* PCI Interrupt Control [R/W] */ + + + /* + * Memory-Interface Registers + */ + +#define NILE4_MEMCTRL 0x00C0 /* Memory Control */ +#define NILE4_ACSTIME 0x00C8 /* Memory Access Timing [R/W] */ +#define NILE4_CHKERR 0x00D0 /* Memory Check Error Status [R] */ + + + /* + * PCI-Bus Registers + */ + +#define NILE4_PCICTRL 0x00E0 /* PCI Control [R/W] */ +#define NILE4_PCIARB 0x00E8 /* PCI Arbiter [R/W] */ +#define NILE4_PCIINIT0 0x00F0 /* PCI Master (Initiator) 0 [R/W] */ +#define NILE4_PCIINIT1 0x00F8 /* PCI Master (Initiator) 1 [R/W] */ +#define NILE4_PCIERR 0x00B8 /* PCI Error [R/W] */ + + + /* + * Local-Bus Registers + */ + +#define NILE4_LCNFG 0x0100 /* Local Bus Configuration [R/W] */ +#define NILE4_LCST2 0x0110 /* Local Bus Chip-Select Timing 2 [R/W] */ +#define NILE4_LCST3 0x0118 /* Local Bus Chip-Select Timing 3 [R/W] */ +#define NILE4_LCST4 0x0120 /* Local Bus Chip-Select Timing 4 [R/W] */ +#define NILE4_LCST5 0x0128 /* Local Bus Chip-Select Timing 5 [R/W] */ +#define NILE4_LCST6 0x0130 /* Local Bus Chip-Select Timing 6 [R/W] */ +#define NILE4_LCST7 0x0138 /* Local Bus Chip-Select Timing 7 [R/W] */ +#define NILE4_LCST8 0x0140 /* Local Bus Chip-Select Timing 8 [R/W] */ +#define NILE4_DCSFN 0x0150 /* Device Chip-Select Muxing and Output */ + /* Enables [R/W] */ +#define NILE4_DCSIO 0x0158 /* Device Chip-Selects As I/O Bits [R/W] */ +#define NILE4_BCST 0x0178 /* Local Boot Chip-Select Timing [R/W] */ + + + /* + * DMA Registers + */ + +#define NILE4_DMACTRL0 0x0180 /* DMA Control 0 [R/W] */ +#define NILE4_DMASRCA0 0x0188 /* DMA Source Address 0 [R/W] */ +#define NILE4_DMADESA0 0x0190 /* DMA Destination Address 0 [R/W] */ +#define NILE4_DMACTRL1 0x0198 /* DMA Control 1 [R/W] */ +#define NILE4_DMASRCA1 0x01A0 /* DMA Source Address 1 [R/W] */ +#define NILE4_DMADESA1 0x01A8 /* DMA Destination Address 1 [R/W] */ + + + /* + * Timer Registers + */ + +#define NILE4_T0CTRL 0x01C0 /* SDRAM Refresh Control [R/W] */ +#define NILE4_T0CNTR 0x01C8 /* SDRAM Refresh Counter [R/W] */ +#define NILE4_T1CTRL 0x01D0 /* CPU-Bus Read Time-Out Control [R/W] */ +#define NILE4_T1CNTR 0x01D8 /* CPU-Bus Read Time-Out Counter [R/W] */ +#define NILE4_T2CTRL 0x01E0 /* General-Purpose Timer Control [R/W] */ +#define NILE4_T2CNTR 0x01E8 /* General-Purpose Timer Counter [R/W] */ +#define NILE4_T3CTRL 0x01F0 /* Watchdog Timer Control [R/W] */ +#define NILE4_T3CNTR 0x01F8 /* Watchdog Timer Counter [R/W] */ + + + /* + * PCI Configuration Space Registers + */ + +#define NILE4_PCI_BASE 0x0200 + +#define NILE4_VID 0x0200 /* PCI Vendor ID [R] */ +#define NILE4_DID 0x0202 /* PCI Device ID [R] */ +#define NILE4_PCICMD 0x0204 /* PCI Command [R/W] */ +#define NILE4_PCISTS 0x0206 /* PCI Status [R/W] */ +#define NILE4_REVID 0x0208 /* PCI Revision ID [R] */ +#define NILE4_CLASS 0x0209 /* PCI Class Code [R] */ +#define NILE4_CLSIZ 0x020C /* PCI Cache Line Size [R/W] */ +#define NILE4_MLTIM 0x020D /* PCI Latency Timer [R/W] */ +#define NILE4_HTYPE 0x020E /* PCI Header Type [R] */ +#define NILE4_BIST 0x020F /* BIST [R] (unimplemented) */ +#define NILE4_BARC 0x0210 /* PCI Base Address Register Control [R/W] */ +#define NILE4_BAR0 0x0218 /* PCI Base Address Register 0 [R/W] */ +#define NILE4_BAR1 0x0220 /* PCI Base Address Register 1 [R/W] */ +#define NILE4_CIS 0x0228 /* PCI Cardbus CIS Pointer [R] */ + /* (unimplemented) */ +#define NILE4_SSVID 0x022C /* PCI Sub-System Vendor ID [R/W] */ +#define NILE4_SSID 0x022E /* PCI Sub-System ID [R/W] */ +#define NILE4_ROM 0x0230 /* Expansion ROM Base Address [R] */ + /* (unimplemented) */ +#define NILE4_INTLIN 0x023C /* PCI Interrupt Line [R/W] */ +#define NILE4_INTPIN 0x023D /* PCI Interrupt Pin [R] */ +#define NILE4_MINGNT 0x023E /* PCI Min_Gnt [R] (unimplemented) */ +#define NILE4_MAXLAT 0x023F /* PCI Max_Lat [R] (unimplemented) */ +#define NILE4_BAR2 0x0240 /* PCI Base Address Register 2 [R/W] */ +#define NILE4_BAR3 0x0248 /* PCI Base Address Register 3 [R/W] */ +#define NILE4_BAR4 0x0250 /* PCI Base Address Register 4 [R/W] */ +#define NILE4_BAR5 0x0258 /* PCI Base Address Register 5 [R/W] */ +#define NILE4_BAR6 0x0260 /* PCI Base Address Register 6 [R/W] */ +#define NILE4_BAR7 0x0268 /* PCI Base Address Register 7 [R/W] */ +#define NILE4_BAR8 0x0270 /* PCI Base Address Register 8 [R/W] */ +#define NILE4_BARB 0x0278 /* PCI Base Address Register BOOT [R/W] */ + + + /* + * Serial-Port Registers + */ + +#define NILE4_UART_BASE 0x0300 + +#define NILE4_UARTRBR 0x0300 /* UART Receiver Data Buffer [R] */ +#define NILE4_UARTTHR 0x0300 /* UART Transmitter Data Holding [W] */ +#define NILE4_UARTIER 0x0308 /* UART Interrupt Enable [R/W] */ +#define NILE4_UARTDLL 0x0300 /* UART Divisor Latch LSB [R/W] */ +#define NILE4_UARTDLM 0x0308 /* UART Divisor Latch MSB [R/W] */ +#define NILE4_UARTIIR 0x0310 /* UART Interrupt ID [R] */ +#define NILE4_UARTFCR 0x0310 /* UART FIFO Control [W] */ +#define NILE4_UARTLCR 0x0318 /* UART Line Control [R/W] */ +#define NILE4_UARTMCR 0x0320 /* UART Modem Control [R/W] */ +#define NILE4_UARTLSR 0x0328 /* UART Line Status [R/W] */ +#define NILE4_UARTMSR 0x0330 /* UART Modem Status [R/W] */ +#define NILE4_UARTSCR 0x0338 /* UART Scratch [R/W] */ + +#define NILE4_UART_BASE_BAUD 520833 /* 100 MHz / 12 / 16 */ + + + /* + * Interrupt Lines + */ + +#define NILE4_INT_CPCE 0 /* CPU-Interface Parity-Error Interrupt */ +#define NILE4_INT_CNTD 1 /* CPU No-Target Decode Interrupt */ +#define NILE4_INT_MCE 2 /* Memory-Check Error Interrupt */ +#define NILE4_INT_DMA 3 /* DMA Controller Interrupt */ +#define NILE4_INT_UART 4 /* UART Interrupt */ +#define NILE4_INT_WDOG 5 /* Watchdog Timer Interrupt */ +#define NILE4_INT_GPT 6 /* General-Purpose Timer Interrupt */ +#define NILE4_INT_LBRTD 7 /* Local-Bus Ready Timer Interrupt */ +#define NILE4_INT_INTA 8 /* PCI Interrupt Signal INTA# */ +#define NILE4_INT_INTB 9 /* PCI Interrupt Signal INTB# */ +#define NILE4_INT_INTC 10 /* PCI Interrupt Signal INTC# */ +#define NILE4_INT_INTD 11 /* PCI Interrupt Signal INTD# */ +#define NILE4_INT_INTE 12 /* PCI Interrupt Signal INTE# (ISA cascade) */ +#define NILE4_INT_RESV 13 /* Reserved */ +#define NILE4_INT_PCIS 14 /* PCI SERR# Interrupt */ +#define NILE4_INT_PCIE 15 /* PCI Internal Error Interrupt */ + + + /* + * Nile 4 Register Access + */ + +static inline void nile4_sync(void) +{ + volatile u32 *p = (volatile u32 *)0xbfc00000; + (void)(*p); +} + +static inline void nile4_out32(u32 offset, u32 val) +{ + *(volatile u32 *)(NILE4_BASE+offset) = val; + nile4_sync(); +} + +static inline u32 nile4_in32(u32 offset) +{ + u32 val = *(volatile u32 *)(NILE4_BASE+offset); + nile4_sync(); + return val; +} + +static inline void nile4_out16(u32 offset, u16 val) +{ + *(volatile u16 *)(NILE4_BASE+offset) = val; + nile4_sync(); +} + +static inline u16 nile4_in16(u32 offset) +{ + u16 val = *(volatile u16 *)(NILE4_BASE+offset); + nile4_sync(); + return val; +} + +static inline void nile4_out8(u32 offset, u8 val) +{ + *(volatile u8 *)(NILE4_BASE+offset) = val; + nile4_sync(); +} + +static inline u8 nile4_in8(u32 offset) +{ + u8 val = *(volatile u8 *)(NILE4_BASE+offset); + nile4_sync(); + return val; +} + + + /* + * Physical Device Address Registers + */ + +extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width, + int on_memory_bus, int visible); + + + /* + * PCI Master Registers + */ + +#define NILE4_PCICMD_IACK 0 /* PCI Interrupt Acknowledge */ +#define NILE4_PCICMD_IO 1 /* PCI I/O Space */ +#define NILE4_PCICMD_MEM 3 /* PCI Memory Space */ +#define NILE4_PCICMD_CFG 5 /* PCI Configuration Space */ + + + /* + * PCI Address Spaces + * + * Note that these are multiplexed using PCIINIT[01]! + */ + +#define NILE4_PCI_IO_BASE 0xa6000000 +#define NILE4_PCI_MEM_BASE 0xa8000000 +#define NILE4_PCI_CFG_BASE NILE4_PCI_MEM_BASE +#define NILE4_PCI_IACK_BASE NILE4_PCI_IO_BASE + + +extern void nile4_set_pmr(u32 pmr, u32 type, u32 addr); + + + /* + * Interrupt Programming + */ + +#define NUM_I8259_INTERRUPTS 16 +#define NUM_NILE4_INTERRUPTS 16 + +#define IRQ_I8259_CASCADE NILE4_INT_INTE +#define is_i8259_irq(irq) ((irq) < NUM_I8259_INTERRUPTS) +#define nile4_to_irq(n) ((n)+NUM_I8259_INTERRUPTS) +#define irq_to_nile4(n) ((n)-NUM_I8259_INTERRUPTS) + +extern void nile4_map_irq(int nile4_irq, int cpu_irq); +extern void nile4_map_irq_all(int cpu_irq); +extern void nile4_enable_irq(unsigned int nile4_irq); +extern void nile4_disable_irq(unsigned int nile4_irq); +extern void nile4_disable_irq_all(void); +extern u16 nile4_get_irq_stat(int cpu_irq); +extern void nile4_enable_irq_output(int cpu_irq); +extern void nile4_disable_irq_output(int cpu_irq); +extern void nile4_set_pci_irq_polarity(int pci_irq, int high); +extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level); +extern void nile4_clear_irq(int nile4_irq); +extern void nile4_clear_irq_mask(u32 mask); +extern u8 nile4_i8259_iack(void); +extern void nile4_dump_irq_status(void); /* Debug */ + +#endif + diff --git a/arch/mips/include/asm/paccess.h b/arch/mips/include/asm/paccess.h new file mode 100644 index 000000000000..c2394f8b0fe1 --- /dev/null +++ b/arch/mips/include/asm/paccess.h @@ -0,0 +1,112 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1997, 1998, 1999, 2000 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * + * Protected memory access. Used for everything that might take revenge + * by sending a DBE error like accessing possibly non-existant memory or + * devices. + */ +#ifndef _ASM_PACCESS_H +#define _ASM_PACCESS_H + +#include <linux/errno.h> + +#ifdef CONFIG_32BIT +#define __PA_ADDR ".word" +#endif +#ifdef CONFIG_64BIT +#define __PA_ADDR ".dword" +#endif + +extern asmlinkage void handle_ibe(void); +extern asmlinkage void handle_dbe(void); + +#define put_dbe(x, ptr) __put_dbe((x), (ptr), sizeof(*(ptr))) +#define get_dbe(x, ptr) __get_dbe((x), (ptr), sizeof(*(ptr))) + +struct __large_pstruct { unsigned long buf[100]; }; +#define __mp(x) (*(struct __large_pstruct *)(x)) + +#define __get_dbe(x, ptr, size) \ +({ \ + long __gu_err; \ + __typeof__(*(ptr)) __gu_val; \ + unsigned long __gu_addr; \ + __asm__("":"=r" (__gu_val)); \ + __gu_addr = (unsigned long) (ptr); \ + __asm__("":"=r" (__gu_err)); \ + switch (size) { \ + case 1: __get_dbe_asm("lb"); break; \ + case 2: __get_dbe_asm("lh"); break; \ + case 4: __get_dbe_asm("lw"); break; \ + case 8: __get_dbe_asm("ld"); break; \ + default: __get_dbe_unknown(); break; \ + } \ + x = (__typeof__(*(ptr))) __gu_val; \ + __gu_err; \ +}) + +#define __get_dbe_asm(insn) \ +{ \ + __asm__ __volatile__( \ + "1:\t" insn "\t%1,%2\n\t" \ + "move\t%0,$0\n" \ + "2:\n\t" \ + ".section\t.fixup,\"ax\"\n" \ + "3:\tli\t%0,%3\n\t" \ + "move\t%1,$0\n\t" \ + "j\t2b\n\t" \ + ".previous\n\t" \ + ".section\t__dbe_table,\"a\"\n\t" \ + __PA_ADDR "\t1b, 3b\n\t" \ + ".previous" \ + :"=r" (__gu_err), "=r" (__gu_val) \ + :"o" (__mp(__gu_addr)), "i" (-EFAULT)); \ +} + +extern void __get_dbe_unknown(void); + +#define __put_dbe(x, ptr, size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __pu_val; \ + long __pu_addr; \ + __pu_val = (x); \ + __pu_addr = (long) (ptr); \ + __asm__("":"=r" (__pu_err)); \ + switch (size) { \ + case 1: __put_dbe_asm("sb"); break; \ + case 2: __put_dbe_asm("sh"); break; \ + case 4: __put_dbe_asm("sw"); break; \ + case 8: __put_dbe_asm("sd"); break; \ + default: __put_dbe_unknown(); break; \ + } \ + __pu_err; \ +}) + +#define __put_dbe_asm(insn) \ +{ \ + __asm__ __volatile__( \ + "1:\t" insn "\t%1,%2\n\t" \ + "move\t%0,$0\n" \ + "2:\n\t" \ + ".section\t.fixup,\"ax\"\n" \ + "3:\tli\t%0,%3\n\t" \ + "j\t2b\n\t" \ + ".previous\n\t" \ + ".section\t__dbe_table,\"a\"\n\t" \ + __PA_ADDR "\t1b, 3b\n\t" \ + ".previous" \ + : "=r" (__pu_err) \ + : "r" (__pu_val), "o" (__mp(__pu_addr)), "i" (-EFAULT)); \ +} + +extern void __put_dbe_unknown(void); + +extern unsigned long search_dbe_table(unsigned long addr); + +#endif /* _ASM_PACCESS_H */ diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h new file mode 100644 index 000000000000..fe7a88ea066e --- /dev/null +++ b/arch/mips/include/asm/page.h @@ -0,0 +1,191 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2000, 03 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_PAGE_H +#define _ASM_PAGE_H + +#include <spaces.h> + +/* + * PAGE_SHIFT determines the page size + */ +#ifdef CONFIG_PAGE_SIZE_4KB +#define PAGE_SHIFT 12 +#endif +#ifdef CONFIG_PAGE_SIZE_8KB +#define PAGE_SHIFT 13 +#endif +#ifdef CONFIG_PAGE_SIZE_16KB +#define PAGE_SHIFT 14 +#endif +#ifdef CONFIG_PAGE_SIZE_64KB +#define PAGE_SHIFT 16 +#endif +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) + +#ifndef __ASSEMBLY__ + +#include <linux/pfn.h> +#include <asm/io.h> + +extern void build_clear_page(void); +extern void build_copy_page(void); + +/* + * It's normally defined only for FLATMEM config but it's + * used in our early mem init code for all memory models. + * So always define it. + */ +#define ARCH_PFN_OFFSET PFN_UP(PHYS_OFFSET) + +extern void clear_page(void * page); +extern void copy_page(void * to, void * from); + +extern unsigned long shm_align_mask; + +static inline unsigned long pages_do_alias(unsigned long addr1, + unsigned long addr2) +{ + return (addr1 ^ addr2) & shm_align_mask; +} + +struct page; + +static inline void clear_user_page(void *addr, unsigned long vaddr, + struct page *page) +{ + extern void (*flush_data_cache_page)(unsigned long addr); + + clear_page(addr); + if (pages_do_alias((unsigned long) addr, vaddr & PAGE_MASK)) + flush_data_cache_page((unsigned long)addr); +} + +extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, + struct page *to); +struct vm_area_struct; +extern void copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma); + +#define __HAVE_ARCH_COPY_USER_HIGHPAGE + +/* + * These are used to make use of C type-checking.. + */ +#ifdef CONFIG_64BIT_PHYS_ADDR + #ifdef CONFIG_CPU_MIPS32 + typedef struct { unsigned long pte_low, pte_high; } pte_t; + #define pte_val(x) ((x).pte_low | ((unsigned long long)(x).pte_high << 32)) + #define __pte(x) ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; }) + #else + typedef struct { unsigned long long pte; } pte_t; + #define pte_val(x) ((x).pte) + #define __pte(x) ((pte_t) { (x) } ) + #endif +#else +typedef struct { unsigned long pte; } pte_t; +#define pte_val(x) ((x).pte) +#define __pte(x) ((pte_t) { (x) } ) +#endif +typedef struct page *pgtable_t; + +/* + * For 3-level pagetables we defines these ourselves, for 2-level the + * definitions are supplied by <asm-generic/pgtable-nopmd.h>. + */ +#ifdef CONFIG_64BIT + +typedef struct { unsigned long pmd; } pmd_t; +#define pmd_val(x) ((x).pmd) +#define __pmd(x) ((pmd_t) { (x) } ) + +#endif + +/* + * Right now we don't support 4-level pagetables, so all pud-related + * definitions come from <asm-generic/pgtable-nopud.h>. + */ + +/* + * Finall the top of the hierarchy, the pgd + */ +typedef struct { unsigned long pgd; } pgd_t; +#define pgd_val(x) ((x).pgd) +#define __pgd(x) ((pgd_t) { (x) } ) + +/* + * Manipulate page protection bits + */ +typedef struct { unsigned long pgprot; } pgprot_t; +#define pgprot_val(x) ((x).pgprot) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +/* + * On R4000-style MMUs where a TLB entry is mapping a adjacent even / odd + * pair of pages we only have a single global bit per pair of pages. When + * writing to the TLB make sure we always have the bit set for both pages + * or none. This macro is used to access the `buddy' of the pte we're just + * working on. + */ +#define ptep_buddy(x) ((pte_t *)((unsigned long)(x) ^ sizeof(pte_t))) + +#endif /* !__ASSEMBLY__ */ + +/* + * __pa()/__va() should be used only during mem init. + */ +#ifdef CONFIG_64BIT +#define __pa(x) \ +({ \ + unsigned long __x = (unsigned long)(x); \ + __x < CKSEG0 ? XPHYSADDR(__x) : CPHYSADDR(__x); \ +}) +#else +#define __pa(x) \ + ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET) +#endif +#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET)) +#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x), 0)) + +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) + +#ifdef CONFIG_FLATMEM + +#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr) + +#elif defined(CONFIG_SPARSEMEM) + +/* pfn_valid is defined in linux/mmzone.h */ + +#elif defined(CONFIG_NEED_MULTIPLE_NODES) + +#define pfn_valid(pfn) \ +({ \ + unsigned long __pfn = (pfn); \ + int __n = pfn_to_nid(__pfn); \ + ((__n >= 0) ? (__pfn < NODE_DATA(__n)->node_start_pfn + \ + NODE_DATA(__n)->node_spanned_pages) \ + : 0); \ +}) + +#endif + +#define virt_to_page(kaddr) pfn_to_page(PFN_DOWN(virt_to_phys(kaddr))) +#define virt_addr_valid(kaddr) pfn_valid(PFN_DOWN(virt_to_phys(kaddr))) + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE) +#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET) + +#include <asm-generic/memory_model.h> +#include <asm-generic/page.h> + +#endif /* _ASM_PAGE_H */ diff --git a/arch/mips/include/asm/param.h b/arch/mips/include/asm/param.h new file mode 100644 index 000000000000..1d9bb8c5ab24 --- /dev/null +++ b/arch/mips/include/asm/param.h @@ -0,0 +1,31 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright 1994 - 2000, 2002 Ralf Baechle (ralf@gnu.org) + * Copyright 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_PARAM_H +#define _ASM_PARAM_H + +#ifdef __KERNEL__ + +# define HZ CONFIG_HZ /* Internal kernel timer frequency */ +# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 65536 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _ASM_PARAM_H */ diff --git a/arch/mips/include/asm/parport.h b/arch/mips/include/asm/parport.h new file mode 100644 index 000000000000..f52656826cce --- /dev/null +++ b/arch/mips/include/asm/parport.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk> + * + * This file should only be included by drivers/parport/parport_pc.c. + */ +#ifndef _ASM_PARPORT_H +#define _ASM_PARPORT_H + +static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma); +static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma) +{ + return parport_pc_find_isa_ports(autoirq, autodma); +} + +#endif /* _ASM_PARPORT_H */ diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h new file mode 100644 index 000000000000..5510c53b7feb --- /dev/null +++ b/arch/mips/include/asm/pci.h @@ -0,0 +1,179 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef _ASM_PCI_H +#define _ASM_PCI_H + +#include <linux/mm.h> + +#ifdef __KERNEL__ + +/* + * This file essentially defines the interface between board + * specific PCI code and MIPS common PCI code. Should potentially put + * into include/asm/pci.h file. + */ + +#include <linux/ioport.h> + +/* + * Each pci channel is a top-level PCI bus seem by CPU. A machine with + * multiple PCI channels may have multiple PCI host controllers or a + * single controller supporting multiple channels. + */ +struct pci_controller { + struct pci_controller *next; + struct pci_bus *bus; + + struct pci_ops *pci_ops; + struct resource *mem_resource; + unsigned long mem_offset; + struct resource *io_resource; + unsigned long io_offset; + unsigned long io_map_base; + + unsigned int index; + /* For compatibility with current (as of July 2003) pciutils + and XFree86. Eventually will be removed. */ + unsigned int need_domain_info; + + int iommu; + + /* Optional access methods for reading/writing the bus number + of the PCI controller */ + int (*get_busno)(void); + void (*set_busno)(int busno); +}; + +/* + * Used by boards to register their PCI busses before the actual scanning. + */ +extern struct pci_controller * alloc_pci_controller(void); +extern void register_pci_controller(struct pci_controller *hose); + +/* + * board supplied pci irq fixup routine + */ +extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); + + +/* Can be used to override the logic in pci_scan_bus for skipping + already-configured bus numbers - to be used for buggy BIOSes + or architectures with incomplete PCI setup by the loader */ + +extern unsigned int pcibios_assign_all_busses(void); + +#define pcibios_scan_all_fns(a, b) 0 + +extern unsigned long PCIBIOS_MIN_IO; +extern unsigned long PCIBIOS_MIN_MEM; + +#define PCIBIOS_MIN_CARDBUS_IO 0x4000 + +extern void pcibios_set_master(struct pci_dev *dev); + +static inline void pcibios_penalize_isa_irq(int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +/* + * Dynamic DMA mapping stuff. + * MIPS has everything mapped statically. + */ + +#include <linux/types.h> +#include <linux/slab.h> +#include <asm/scatterlist.h> +#include <linux/string.h> +#include <asm/io.h> + +struct pci_dev; + +/* + * The PCI address space does equal the physical memory address space. The + * networking and block device layers use this boolean for bounce buffer + * decisions. This is set if any hose does not have an IOMMU. + */ +extern unsigned int PCI_DMA_BUS_IS_PHYS; + +#ifdef CONFIG_DMA_NEED_PCI_MAP_STATE + +/* pci_unmap_{single,page} is not a nop, thus... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL)) + +#else /* CONFIG_DMA_NEED_PCI_MAP_STATE */ + +/* pci_unmap_{page,single} is a nop so... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) +#define pci_unmap_addr(PTR, ADDR_NAME) (0) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define pci_unmap_len(PTR, LEN_NAME) (0) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) + +#endif /* CONFIG_DMA_NEED_PCI_MAP_STATE */ + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif + +extern void pcibios_resource_to_bus(struct pci_dev *dev, + struct pci_bus_region *region, struct resource *res); + +extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region); + +static inline struct resource * +pcibios_select_root(struct pci_dev *pdev, struct resource *res) +{ + struct resource *root = NULL; + + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + if (res->flags & IORESOURCE_MEM) + root = &iomem_resource; + + return root; +} + +#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index + +static inline int pci_proc_domain(struct pci_bus *bus) +{ + struct pci_controller *hose = bus->sysdata; + return hose->need_domain_info; +} + +#endif /* __KERNEL__ */ + +/* implement the pci_ DMA API in terms of the generic device dma_ one */ +#include <asm-generic/pci-dma-compat.h> + +/* Do platform specific device initialization at pci_enable_device() time */ +extern int pcibios_plat_dev_init(struct pci_dev *dev); + +/* Chances are this interrupt is wired PC-style ... */ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return channel ? 15 : 14; +} + +extern int pci_probe_only; + +extern char * (*pcibios_plat_setup)(char *str); + +#endif /* _ASM_PCI_H */ diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h new file mode 100644 index 000000000000..5f4b9d4e4114 --- /dev/null +++ b/arch/mips/include/asm/pci/bridge.h @@ -0,0 +1,854 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * bridge.h - bridge chip header file, derived from IRIX <sys/PCI/bridge.h>, + * revision 1.76. + * + * Copyright (C) 1996, 1999 Silcon Graphics, Inc. + * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_PCI_BRIDGE_H +#define _ASM_PCI_BRIDGE_H + +#include <linux/types.h> +#include <linux/pci.h> +#include <asm/xtalk/xwidget.h> /* generic widget header */ +#include <asm/sn/types.h> + +/* I/O page size */ + +#define IOPFNSHIFT 12 /* 4K per mapped page */ + +#define IOPGSIZE (1 << IOPFNSHIFT) +#define IOPG(x) ((x) >> IOPFNSHIFT) +#define IOPGOFF(x) ((x) & (IOPGSIZE-1)) + +/* Bridge RAM sizes */ + +#define BRIDGE_ATE_RAM_SIZE 0x00000400 /* 1kB ATE RAM */ + +#define BRIDGE_CONFIG_BASE 0x20000 +#define BRIDGE_CONFIG1_BASE 0x28000 +#define BRIDGE_CONFIG_END 0x30000 +#define BRIDGE_CONFIG_SLOT_SIZE 0x1000 + +#define BRIDGE_SSRAM_512K 0x00080000 /* 512kB */ +#define BRIDGE_SSRAM_128K 0x00020000 /* 128kB */ +#define BRIDGE_SSRAM_64K 0x00010000 /* 64kB */ +#define BRIDGE_SSRAM_0K 0x00000000 /* 0kB */ + +/* ======================================================================== + * Bridge address map + */ + +#ifndef __ASSEMBLY__ + +/* + * All accesses to bridge hardware registers must be done + * using 32-bit loads and stores. + */ +typedef u32 bridgereg_t; + +typedef u64 bridge_ate_t; + +/* pointers to bridge ATEs + * are always "pointer to volatile" + */ +typedef volatile bridge_ate_t *bridge_ate_p; + +/* + * It is generally preferred that hardware registers on the bridge + * are located from C code via this structure. + * + * Generated from Bridge spec dated 04oct95 + */ + +typedef volatile struct bridge_s { + /* Local Registers 0x000000-0x00FFFF */ + + /* standard widget configuration 0x000000-0x000057 */ + widget_cfg_t b_widget; /* 0x000000 */ + + /* helper fieldnames for accessing bridge widget */ + +#define b_wid_id b_widget.w_id +#define b_wid_stat b_widget.w_status +#define b_wid_err_upper b_widget.w_err_upper_addr +#define b_wid_err_lower b_widget.w_err_lower_addr +#define b_wid_control b_widget.w_control +#define b_wid_req_timeout b_widget.w_req_timeout +#define b_wid_int_upper b_widget.w_intdest_upper_addr +#define b_wid_int_lower b_widget.w_intdest_lower_addr +#define b_wid_err_cmdword b_widget.w_err_cmd_word +#define b_wid_llp b_widget.w_llp_cfg +#define b_wid_tflush b_widget.w_tflush + + /* bridge-specific widget configuration 0x000058-0x00007F */ + bridgereg_t _pad_000058; + bridgereg_t b_wid_aux_err; /* 0x00005C */ + bridgereg_t _pad_000060; + bridgereg_t b_wid_resp_upper; /* 0x000064 */ + bridgereg_t _pad_000068; + bridgereg_t b_wid_resp_lower; /* 0x00006C */ + bridgereg_t _pad_000070; + bridgereg_t b_wid_tst_pin_ctrl; /* 0x000074 */ + bridgereg_t _pad_000078[2]; + + /* PMU & Map 0x000080-0x00008F */ + bridgereg_t _pad_000080; + bridgereg_t b_dir_map; /* 0x000084 */ + bridgereg_t _pad_000088[2]; + + /* SSRAM 0x000090-0x00009F */ + bridgereg_t _pad_000090; + bridgereg_t b_ram_perr; /* 0x000094 */ + bridgereg_t _pad_000098[2]; + + /* Arbitration 0x0000A0-0x0000AF */ + bridgereg_t _pad_0000A0; + bridgereg_t b_arb; /* 0x0000A4 */ + bridgereg_t _pad_0000A8[2]; + + /* Number In A Can 0x0000B0-0x0000BF */ + bridgereg_t _pad_0000B0; + bridgereg_t b_nic; /* 0x0000B4 */ + bridgereg_t _pad_0000B8[2]; + + /* PCI/GIO 0x0000C0-0x0000FF */ + bridgereg_t _pad_0000C0; + bridgereg_t b_bus_timeout; /* 0x0000C4 */ +#define b_pci_bus_timeout b_bus_timeout + + bridgereg_t _pad_0000C8; + bridgereg_t b_pci_cfg; /* 0x0000CC */ + bridgereg_t _pad_0000D0; + bridgereg_t b_pci_err_upper; /* 0x0000D4 */ + bridgereg_t _pad_0000D8; + bridgereg_t b_pci_err_lower; /* 0x0000DC */ + bridgereg_t _pad_0000E0[8]; +#define b_gio_err_lower b_pci_err_lower +#define b_gio_err_upper b_pci_err_upper + + /* Interrupt 0x000100-0x0001FF */ + bridgereg_t _pad_000100; + bridgereg_t b_int_status; /* 0x000104 */ + bridgereg_t _pad_000108; + bridgereg_t b_int_enable; /* 0x00010C */ + bridgereg_t _pad_000110; + bridgereg_t b_int_rst_stat; /* 0x000114 */ + bridgereg_t _pad_000118; + bridgereg_t b_int_mode; /* 0x00011C */ + bridgereg_t _pad_000120; + bridgereg_t b_int_device; /* 0x000124 */ + bridgereg_t _pad_000128; + bridgereg_t b_int_host_err; /* 0x00012C */ + + struct { + bridgereg_t __pad; /* 0x0001{30,,,68} */ + bridgereg_t addr; /* 0x0001{34,,,6C} */ + } b_int_addr[8]; /* 0x000130 */ + + bridgereg_t _pad_000170[36]; + + /* Device 0x000200-0x0003FF */ + struct { + bridgereg_t __pad; /* 0x0002{00,,,38} */ + bridgereg_t reg; /* 0x0002{04,,,3C} */ + } b_device[8]; /* 0x000200 */ + + struct { + bridgereg_t __pad; /* 0x0002{40,,,78} */ + bridgereg_t reg; /* 0x0002{44,,,7C} */ + } b_wr_req_buf[8]; /* 0x000240 */ + + struct { + bridgereg_t __pad; /* 0x0002{80,,,88} */ + bridgereg_t reg; /* 0x0002{84,,,8C} */ + } b_rrb_map[2]; /* 0x000280 */ +#define b_even_resp b_rrb_map[0].reg /* 0x000284 */ +#define b_odd_resp b_rrb_map[1].reg /* 0x00028C */ + + bridgereg_t _pad_000290; + bridgereg_t b_resp_status; /* 0x000294 */ + bridgereg_t _pad_000298; + bridgereg_t b_resp_clear; /* 0x00029C */ + + bridgereg_t _pad_0002A0[24]; + + char _pad_000300[0x10000 - 0x000300]; + + /* Internal Address Translation Entry RAM 0x010000-0x0103FF */ + union { + bridge_ate_t wr; /* write-only */ + struct { + bridgereg_t _p_pad; + bridgereg_t rd; /* read-only */ + } hi; + } b_int_ate_ram[128]; + + char _pad_010400[0x11000 - 0x010400]; + + /* Internal Address Translation Entry RAM LOW 0x011000-0x0113FF */ + struct { + bridgereg_t _p_pad; + bridgereg_t rd; /* read-only */ + } b_int_ate_ram_lo[128]; + + char _pad_011400[0x20000 - 0x011400]; + + /* PCI Device Configuration Spaces 0x020000-0x027FFF */ + union { /* make all access sizes available. */ + u8 c[0x1000 / 1]; + u16 s[0x1000 / 2]; + u32 l[0x1000 / 4]; + u64 d[0x1000 / 8]; + union { + u8 c[0x100 / 1]; + u16 s[0x100 / 2]; + u32 l[0x100 / 4]; + u64 d[0x100 / 8]; + } f[8]; + } b_type0_cfg_dev[8]; /* 0x020000 */ + + /* PCI Type 1 Configuration Space 0x028000-0x028FFF */ + union { /* make all access sizes available. */ + u8 c[0x1000 / 1]; + u16 s[0x1000 / 2]; + u32 l[0x1000 / 4]; + u64 d[0x1000 / 8]; + } b_type1_cfg; /* 0x028000-0x029000 */ + + char _pad_029000[0x007000]; /* 0x029000-0x030000 */ + + /* PCI Interrupt Acknowledge Cycle 0x030000 */ + union { + u8 c[8 / 1]; + u16 s[8 / 2]; + u32 l[8 / 4]; + u64 d[8 / 8]; + } b_pci_iack; /* 0x030000 */ + + u8 _pad_030007[0x04fff8]; /* 0x030008-0x07FFFF */ + + /* External Address Translation Entry RAM 0x080000-0x0FFFFF */ + bridge_ate_t b_ext_ate_ram[0x10000]; + + /* Reserved 0x100000-0x1FFFFF */ + char _pad_100000[0x200000-0x100000]; + + /* PCI/GIO Device Spaces 0x200000-0xBFFFFF */ + union { /* make all access sizes available. */ + u8 c[0x100000 / 1]; + u16 s[0x100000 / 2]; + u32 l[0x100000 / 4]; + u64 d[0x100000 / 8]; + } b_devio_raw[10]; /* 0x200000 */ + + /* b_devio macro is a bit strange; it reflects the + * fact that the Bridge ASIC provides 2M for the + * first two DevIO windows and 1M for the other six. + */ +#define b_devio(n) b_devio_raw[((n)<2)?(n*2):(n+2)] + + /* External Flash Proms 1,0 0xC00000-0xFFFFFF */ + union { /* make all access sizes available. */ + u8 c[0x400000 / 1]; /* read-only */ + u16 s[0x400000 / 2]; /* read-write */ + u32 l[0x400000 / 4]; /* read-only */ + u64 d[0x400000 / 8]; /* read-only */ + } b_external_flash; /* 0xC00000 */ +} bridge_t; + +/* + * Field formats for Error Command Word and Auxillary Error Command Word + * of bridge. + */ +typedef struct bridge_err_cmdword_s { + union { + u32 cmd_word; + struct { + u32 didn:4, /* Destination ID */ + sidn:4, /* Source ID */ + pactyp:4, /* Packet type */ + tnum:5, /* Trans Number */ + coh:1, /* Coh Transacti */ + ds:2, /* Data size */ + gbr:1, /* GBR enable */ + vbpm:1, /* VBPM message */ + error:1, /* Error occurred */ + barr:1, /* Barrier op */ + rsvd:8; + } berr_st; + } berr_un; +} bridge_err_cmdword_t; + +#define berr_field berr_un.berr_st +#endif /* !__ASSEMBLY__ */ + +/* + * The values of these macros can and should be crosschecked + * regularly against the offsets of the like-named fields + * within the "bridge_t" structure above. + */ + +/* Byte offset macros for Bridge internal registers */ + +#define BRIDGE_WID_ID WIDGET_ID +#define BRIDGE_WID_STAT WIDGET_STATUS +#define BRIDGE_WID_ERR_UPPER WIDGET_ERR_UPPER_ADDR +#define BRIDGE_WID_ERR_LOWER WIDGET_ERR_LOWER_ADDR +#define BRIDGE_WID_CONTROL WIDGET_CONTROL +#define BRIDGE_WID_REQ_TIMEOUT WIDGET_REQ_TIMEOUT +#define BRIDGE_WID_INT_UPPER WIDGET_INTDEST_UPPER_ADDR +#define BRIDGE_WID_INT_LOWER WIDGET_INTDEST_LOWER_ADDR +#define BRIDGE_WID_ERR_CMDWORD WIDGET_ERR_CMD_WORD +#define BRIDGE_WID_LLP WIDGET_LLP_CFG +#define BRIDGE_WID_TFLUSH WIDGET_TFLUSH + +#define BRIDGE_WID_AUX_ERR 0x00005C /* Aux Error Command Word */ +#define BRIDGE_WID_RESP_UPPER 0x000064 /* Response Buf Upper Addr */ +#define BRIDGE_WID_RESP_LOWER 0x00006C /* Response Buf Lower Addr */ +#define BRIDGE_WID_TST_PIN_CTRL 0x000074 /* Test pin control */ + +#define BRIDGE_DIR_MAP 0x000084 /* Direct Map reg */ + +#define BRIDGE_RAM_PERR 0x000094 /* SSRAM Parity Error */ + +#define BRIDGE_ARB 0x0000A4 /* Arbitration Priority reg */ + +#define BRIDGE_NIC 0x0000B4 /* Number In A Can */ + +#define BRIDGE_BUS_TIMEOUT 0x0000C4 /* Bus Timeout Register */ +#define BRIDGE_PCI_BUS_TIMEOUT BRIDGE_BUS_TIMEOUT +#define BRIDGE_PCI_CFG 0x0000CC /* PCI Type 1 Config reg */ +#define BRIDGE_PCI_ERR_UPPER 0x0000D4 /* PCI error Upper Addr */ +#define BRIDGE_PCI_ERR_LOWER 0x0000DC /* PCI error Lower Addr */ + +#define BRIDGE_INT_STATUS 0x000104 /* Interrupt Status */ +#define BRIDGE_INT_ENABLE 0x00010C /* Interrupt Enables */ +#define BRIDGE_INT_RST_STAT 0x000114 /* Reset Intr Status */ +#define BRIDGE_INT_MODE 0x00011C /* Interrupt Mode */ +#define BRIDGE_INT_DEVICE 0x000124 /* Interrupt Device */ +#define BRIDGE_INT_HOST_ERR 0x00012C /* Host Error Field */ + +#define BRIDGE_INT_ADDR0 0x000134 /* Host Address Reg */ +#define BRIDGE_INT_ADDR_OFF 0x000008 /* Host Addr offset (1..7) */ +#define BRIDGE_INT_ADDR(x) (BRIDGE_INT_ADDR0+(x)*BRIDGE_INT_ADDR_OFF) + +#define BRIDGE_DEVICE0 0x000204 /* Device 0 */ +#define BRIDGE_DEVICE_OFF 0x000008 /* Device offset (1..7) */ +#define BRIDGE_DEVICE(x) (BRIDGE_DEVICE0+(x)*BRIDGE_DEVICE_OFF) + +#define BRIDGE_WR_REQ_BUF0 0x000244 /* Write Request Buffer 0 */ +#define BRIDGE_WR_REQ_BUF_OFF 0x000008 /* Buffer Offset (1..7) */ +#define BRIDGE_WR_REQ_BUF(x) (BRIDGE_WR_REQ_BUF0+(x)*BRIDGE_WR_REQ_BUF_OFF) + +#define BRIDGE_EVEN_RESP 0x000284 /* Even Device Response Buf */ +#define BRIDGE_ODD_RESP 0x00028C /* Odd Device Response Buf */ + +#define BRIDGE_RESP_STATUS 0x000294 /* Read Response Status reg */ +#define BRIDGE_RESP_CLEAR 0x00029C /* Read Response Clear reg */ + +/* Byte offset macros for Bridge I/O space */ + +#define BRIDGE_ATE_RAM 0x00010000 /* Internal Addr Xlat Ram */ + +#define BRIDGE_TYPE0_CFG_DEV0 0x00020000 /* Type 0 Cfg, Device 0 */ +#define BRIDGE_TYPE0_CFG_SLOT_OFF 0x00001000 /* Type 0 Cfg Slot Offset (1..7) */ +#define BRIDGE_TYPE0_CFG_FUNC_OFF 0x00000100 /* Type 0 Cfg Func Offset (1..7) */ +#define BRIDGE_TYPE0_CFG_DEV(s) (BRIDGE_TYPE0_CFG_DEV0+\ + (s)*BRIDGE_TYPE0_CFG_SLOT_OFF) +#define BRIDGE_TYPE0_CFG_DEVF(s, f) (BRIDGE_TYPE0_CFG_DEV0+\ + (s)*BRIDGE_TYPE0_CFG_SLOT_OFF+\ + (f)*BRIDGE_TYPE0_CFG_FUNC_OFF) + +#define BRIDGE_TYPE1_CFG 0x00028000 /* Type 1 Cfg space */ + +#define BRIDGE_PCI_IACK 0x00030000 /* PCI Interrupt Ack */ +#define BRIDGE_EXT_SSRAM 0x00080000 /* Extern SSRAM (ATE) */ + +/* Byte offset macros for Bridge device IO spaces */ + +#define BRIDGE_DEV_CNT 8 /* Up to 8 devices per bridge */ +#define BRIDGE_DEVIO0 0x00200000 /* Device IO 0 Addr */ +#define BRIDGE_DEVIO1 0x00400000 /* Device IO 1 Addr */ +#define BRIDGE_DEVIO2 0x00600000 /* Device IO 2 Addr */ +#define BRIDGE_DEVIO_OFF 0x00100000 /* Device IO Offset (3..7) */ + +#define BRIDGE_DEVIO_2MB 0x00200000 /* Device IO Offset (0..1) */ +#define BRIDGE_DEVIO_1MB 0x00100000 /* Device IO Offset (2..7) */ + +#define BRIDGE_DEVIO(x) ((x)<=1 ? BRIDGE_DEVIO0+(x)*BRIDGE_DEVIO_2MB : BRIDGE_DEVIO2+((x)-2)*BRIDGE_DEVIO_1MB) + +#define BRIDGE_EXTERNAL_FLASH 0x00C00000 /* External Flash PROMS */ + +/* ======================================================================== + * Bridge register bit field definitions + */ + +/* Widget part number of bridge */ +#define BRIDGE_WIDGET_PART_NUM 0xc002 +#define XBRIDGE_WIDGET_PART_NUM 0xd002 + +/* Manufacturer of bridge */ +#define BRIDGE_WIDGET_MFGR_NUM 0x036 +#define XBRIDGE_WIDGET_MFGR_NUM 0x024 + +/* Revision numbers for known Bridge revisions */ +#define BRIDGE_REV_A 0x1 +#define BRIDGE_REV_B 0x2 +#define BRIDGE_REV_C 0x3 +#define BRIDGE_REV_D 0x4 + +/* Bridge widget status register bits definition */ + +#define BRIDGE_STAT_LLP_REC_CNT (0xFFu << 24) +#define BRIDGE_STAT_LLP_TX_CNT (0xFF << 16) +#define BRIDGE_STAT_FLASH_SELECT (0x1 << 6) +#define BRIDGE_STAT_PCI_GIO_N (0x1 << 5) +#define BRIDGE_STAT_PENDING (0x1F << 0) + +/* Bridge widget control register bits definition */ +#define BRIDGE_CTRL_FLASH_WR_EN (0x1ul << 31) +#define BRIDGE_CTRL_EN_CLK50 (0x1 << 30) +#define BRIDGE_CTRL_EN_CLK40 (0x1 << 29) +#define BRIDGE_CTRL_EN_CLK33 (0x1 << 28) +#define BRIDGE_CTRL_RST(n) ((n) << 24) +#define BRIDGE_CTRL_RST_MASK (BRIDGE_CTRL_RST(0xF)) +#define BRIDGE_CTRL_RST_PIN(x) (BRIDGE_CTRL_RST(0x1 << (x))) +#define BRIDGE_CTRL_IO_SWAP (0x1 << 23) +#define BRIDGE_CTRL_MEM_SWAP (0x1 << 22) +#define BRIDGE_CTRL_PAGE_SIZE (0x1 << 21) +#define BRIDGE_CTRL_SS_PAR_BAD (0x1 << 20) +#define BRIDGE_CTRL_SS_PAR_EN (0x1 << 19) +#define BRIDGE_CTRL_SSRAM_SIZE(n) ((n) << 17) +#define BRIDGE_CTRL_SSRAM_SIZE_MASK (BRIDGE_CTRL_SSRAM_SIZE(0x3)) +#define BRIDGE_CTRL_SSRAM_512K (BRIDGE_CTRL_SSRAM_SIZE(0x3)) +#define BRIDGE_CTRL_SSRAM_128K (BRIDGE_CTRL_SSRAM_SIZE(0x2)) +#define BRIDGE_CTRL_SSRAM_64K (BRIDGE_CTRL_SSRAM_SIZE(0x1)) +#define BRIDGE_CTRL_SSRAM_1K (BRIDGE_CTRL_SSRAM_SIZE(0x0)) +#define BRIDGE_CTRL_F_BAD_PKT (0x1 << 16) +#define BRIDGE_CTRL_LLP_XBAR_CRD(n) ((n) << 12) +#define BRIDGE_CTRL_LLP_XBAR_CRD_MASK (BRIDGE_CTRL_LLP_XBAR_CRD(0xf)) +#define BRIDGE_CTRL_CLR_RLLP_CNT (0x1 << 11) +#define BRIDGE_CTRL_CLR_TLLP_CNT (0x1 << 10) +#define BRIDGE_CTRL_SYS_END (0x1 << 9) +#define BRIDGE_CTRL_MAX_TRANS(n) ((n) << 4) +#define BRIDGE_CTRL_MAX_TRANS_MASK (BRIDGE_CTRL_MAX_TRANS(0x1f)) +#define BRIDGE_CTRL_WIDGET_ID(n) ((n) << 0) +#define BRIDGE_CTRL_WIDGET_ID_MASK (BRIDGE_CTRL_WIDGET_ID(0xf)) + +/* Bridge Response buffer Error Upper Register bit fields definition */ +#define BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT (20) +#define BRIDGE_RESP_ERRUPPR_DEVNUM_MASK (0x7 << BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT) +#define BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT (16) +#define BRIDGE_RESP_ERRUPPR_BUFNUM_MASK (0xF << BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT) +#define BRIDGE_RESP_ERRRUPPR_BUFMASK (0xFFFF) + +#define BRIDGE_RESP_ERRUPPR_BUFNUM(x) \ + (((x) & BRIDGE_RESP_ERRUPPR_BUFNUM_MASK) >> \ + BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT) + +#define BRIDGE_RESP_ERRUPPR_DEVICE(x) \ + (((x) & BRIDGE_RESP_ERRUPPR_DEVNUM_MASK) >> \ + BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT) + +/* Bridge direct mapping register bits definition */ +#define BRIDGE_DIRMAP_W_ID_SHFT 20 +#define BRIDGE_DIRMAP_W_ID (0xf << BRIDGE_DIRMAP_W_ID_SHFT) +#define BRIDGE_DIRMAP_RMF_64 (0x1 << 18) +#define BRIDGE_DIRMAP_ADD512 (0x1 << 17) +#define BRIDGE_DIRMAP_OFF (0x1ffff << 0) +#define BRIDGE_DIRMAP_OFF_ADDRSHFT (31) /* lsbit of DIRMAP_OFF is xtalk address bit 31 */ + +/* Bridge Arbitration register bits definition */ +#define BRIDGE_ARB_REQ_WAIT_TICK(x) ((x) << 16) +#define BRIDGE_ARB_REQ_WAIT_TICK_MASK BRIDGE_ARB_REQ_WAIT_TICK(0x3) +#define BRIDGE_ARB_REQ_WAIT_EN(x) ((x) << 8) +#define BRIDGE_ARB_REQ_WAIT_EN_MASK BRIDGE_ARB_REQ_WAIT_EN(0xff) +#define BRIDGE_ARB_FREEZE_GNT (1 << 6) +#define BRIDGE_ARB_HPRI_RING_B2 (1 << 5) +#define BRIDGE_ARB_HPRI_RING_B1 (1 << 4) +#define BRIDGE_ARB_HPRI_RING_B0 (1 << 3) +#define BRIDGE_ARB_LPRI_RING_B2 (1 << 2) +#define BRIDGE_ARB_LPRI_RING_B1 (1 << 1) +#define BRIDGE_ARB_LPRI_RING_B0 (1 << 0) + +/* Bridge Bus time-out register bits definition */ +#define BRIDGE_BUS_PCI_RETRY_HLD(x) ((x) << 16) +#define BRIDGE_BUS_PCI_RETRY_HLD_MASK BRIDGE_BUS_PCI_RETRY_HLD(0x1f) +#define BRIDGE_BUS_GIO_TIMEOUT (1 << 12) +#define BRIDGE_BUS_PCI_RETRY_CNT(x) ((x) << 0) +#define BRIDGE_BUS_PCI_RETRY_MASK BRIDGE_BUS_PCI_RETRY_CNT(0x3ff) + +/* Bridge interrupt status register bits definition */ +#define BRIDGE_ISR_MULTI_ERR (0x1u << 31) +#define BRIDGE_ISR_PMU_ESIZE_FAULT (0x1 << 30) +#define BRIDGE_ISR_UNEXP_RESP (0x1 << 29) +#define BRIDGE_ISR_BAD_XRESP_PKT (0x1 << 28) +#define BRIDGE_ISR_BAD_XREQ_PKT (0x1 << 27) +#define BRIDGE_ISR_RESP_XTLK_ERR (0x1 << 26) +#define BRIDGE_ISR_REQ_XTLK_ERR (0x1 << 25) +#define BRIDGE_ISR_INVLD_ADDR (0x1 << 24) +#define BRIDGE_ISR_UNSUPPORTED_XOP (0x1 << 23) +#define BRIDGE_ISR_XREQ_FIFO_OFLOW (0x1 << 22) +#define BRIDGE_ISR_LLP_REC_SNERR (0x1 << 21) +#define BRIDGE_ISR_LLP_REC_CBERR (0x1 << 20) +#define BRIDGE_ISR_LLP_RCTY (0x1 << 19) +#define BRIDGE_ISR_LLP_TX_RETRY (0x1 << 18) +#define BRIDGE_ISR_LLP_TCTY (0x1 << 17) +#define BRIDGE_ISR_SSRAM_PERR (0x1 << 16) +#define BRIDGE_ISR_PCI_ABORT (0x1 << 15) +#define BRIDGE_ISR_PCI_PARITY (0x1 << 14) +#define BRIDGE_ISR_PCI_SERR (0x1 << 13) +#define BRIDGE_ISR_PCI_PERR (0x1 << 12) +#define BRIDGE_ISR_PCI_MST_TIMEOUT (0x1 << 11) +#define BRIDGE_ISR_GIO_MST_TIMEOUT BRIDGE_ISR_PCI_MST_TIMEOUT +#define BRIDGE_ISR_PCI_RETRY_CNT (0x1 << 10) +#define BRIDGE_ISR_XREAD_REQ_TIMEOUT (0x1 << 9) +#define BRIDGE_ISR_GIO_B_ENBL_ERR (0x1 << 8) +#define BRIDGE_ISR_INT_MSK (0xff << 0) +#define BRIDGE_ISR_INT(x) (0x1 << (x)) + +#define BRIDGE_ISR_LINK_ERROR \ + (BRIDGE_ISR_LLP_REC_SNERR|BRIDGE_ISR_LLP_REC_CBERR| \ + BRIDGE_ISR_LLP_RCTY|BRIDGE_ISR_LLP_TX_RETRY| \ + BRIDGE_ISR_LLP_TCTY) + +#define BRIDGE_ISR_PCIBUS_PIOERR \ + (BRIDGE_ISR_PCI_MST_TIMEOUT|BRIDGE_ISR_PCI_ABORT) + +#define BRIDGE_ISR_PCIBUS_ERROR \ + (BRIDGE_ISR_PCIBUS_PIOERR|BRIDGE_ISR_PCI_PERR| \ + BRIDGE_ISR_PCI_SERR|BRIDGE_ISR_PCI_RETRY_CNT| \ + BRIDGE_ISR_PCI_PARITY) + +#define BRIDGE_ISR_XTALK_ERROR \ + (BRIDGE_ISR_XREAD_REQ_TIMEOUT|BRIDGE_ISR_XREQ_FIFO_OFLOW|\ + BRIDGE_ISR_UNSUPPORTED_XOP|BRIDGE_ISR_INVLD_ADDR| \ + BRIDGE_ISR_REQ_XTLK_ERR|BRIDGE_ISR_RESP_XTLK_ERR| \ + BRIDGE_ISR_BAD_XREQ_PKT|BRIDGE_ISR_BAD_XRESP_PKT| \ + BRIDGE_ISR_UNEXP_RESP) + +#define BRIDGE_ISR_ERRORS \ + (BRIDGE_ISR_LINK_ERROR|BRIDGE_ISR_PCIBUS_ERROR| \ + BRIDGE_ISR_XTALK_ERROR|BRIDGE_ISR_SSRAM_PERR| \ + BRIDGE_ISR_PMU_ESIZE_FAULT) + +/* + * List of Errors which are fatal and kill the system + */ +#define BRIDGE_ISR_ERROR_FATAL \ + ((BRIDGE_ISR_XTALK_ERROR & ~BRIDGE_ISR_XREAD_REQ_TIMEOUT)|\ + BRIDGE_ISR_PCI_SERR|BRIDGE_ISR_PCI_PARITY ) + +#define BRIDGE_ISR_ERROR_DUMP \ + (BRIDGE_ISR_PCIBUS_ERROR|BRIDGE_ISR_PMU_ESIZE_FAULT| \ + BRIDGE_ISR_XTALK_ERROR|BRIDGE_ISR_SSRAM_PERR) + +/* Bridge interrupt enable register bits definition */ +#define BRIDGE_IMR_UNEXP_RESP BRIDGE_ISR_UNEXP_RESP +#define BRIDGE_IMR_PMU_ESIZE_FAULT BRIDGE_ISR_PMU_ESIZE_FAULT +#define BRIDGE_IMR_BAD_XRESP_PKT BRIDGE_ISR_BAD_XRESP_PKT +#define BRIDGE_IMR_BAD_XREQ_PKT BRIDGE_ISR_BAD_XREQ_PKT +#define BRIDGE_IMR_RESP_XTLK_ERR BRIDGE_ISR_RESP_XTLK_ERR +#define BRIDGE_IMR_REQ_XTLK_ERR BRIDGE_ISR_REQ_XTLK_ERR +#define BRIDGE_IMR_INVLD_ADDR BRIDGE_ISR_INVLD_ADDR +#define BRIDGE_IMR_UNSUPPORTED_XOP BRIDGE_ISR_UNSUPPORTED_XOP +#define BRIDGE_IMR_XREQ_FIFO_OFLOW BRIDGE_ISR_XREQ_FIFO_OFLOW +#define BRIDGE_IMR_LLP_REC_SNERR BRIDGE_ISR_LLP_REC_SNERR +#define BRIDGE_IMR_LLP_REC_CBERR BRIDGE_ISR_LLP_REC_CBERR +#define BRIDGE_IMR_LLP_RCTY BRIDGE_ISR_LLP_RCTY +#define BRIDGE_IMR_LLP_TX_RETRY BRIDGE_ISR_LLP_TX_RETRY +#define BRIDGE_IMR_LLP_TCTY BRIDGE_ISR_LLP_TCTY +#define BRIDGE_IMR_SSRAM_PERR BRIDGE_ISR_SSRAM_PERR +#define BRIDGE_IMR_PCI_ABORT BRIDGE_ISR_PCI_ABORT +#define BRIDGE_IMR_PCI_PARITY BRIDGE_ISR_PCI_PARITY +#define BRIDGE_IMR_PCI_SERR BRIDGE_ISR_PCI_SERR +#define BRIDGE_IMR_PCI_PERR BRIDGE_ISR_PCI_PERR +#define BRIDGE_IMR_PCI_MST_TIMEOUT BRIDGE_ISR_PCI_MST_TIMEOUT +#define BRIDGE_IMR_GIO_MST_TIMEOUT BRIDGE_ISR_GIO_MST_TIMEOUT +#define BRIDGE_IMR_PCI_RETRY_CNT BRIDGE_ISR_PCI_RETRY_CNT +#define BRIDGE_IMR_XREAD_REQ_TIMEOUT BRIDGE_ISR_XREAD_REQ_TIMEOUT +#define BRIDGE_IMR_GIO_B_ENBL_ERR BRIDGE_ISR_GIO_B_ENBL_ERR +#define BRIDGE_IMR_INT_MSK BRIDGE_ISR_INT_MSK +#define BRIDGE_IMR_INT(x) BRIDGE_ISR_INT(x) + +/* Bridge interrupt reset register bits definition */ +#define BRIDGE_IRR_MULTI_CLR (0x1 << 6) +#define BRIDGE_IRR_CRP_GRP_CLR (0x1 << 5) +#define BRIDGE_IRR_RESP_BUF_GRP_CLR (0x1 << 4) +#define BRIDGE_IRR_REQ_DSP_GRP_CLR (0x1 << 3) +#define BRIDGE_IRR_LLP_GRP_CLR (0x1 << 2) +#define BRIDGE_IRR_SSRAM_GRP_CLR (0x1 << 1) +#define BRIDGE_IRR_PCI_GRP_CLR (0x1 << 0) +#define BRIDGE_IRR_GIO_GRP_CLR (0x1 << 0) +#define BRIDGE_IRR_ALL_CLR 0x7f + +#define BRIDGE_IRR_CRP_GRP (BRIDGE_ISR_UNEXP_RESP | \ + BRIDGE_ISR_XREQ_FIFO_OFLOW) +#define BRIDGE_IRR_RESP_BUF_GRP (BRIDGE_ISR_BAD_XRESP_PKT | \ + BRIDGE_ISR_RESP_XTLK_ERR | \ + BRIDGE_ISR_XREAD_REQ_TIMEOUT) +#define BRIDGE_IRR_REQ_DSP_GRP (BRIDGE_ISR_UNSUPPORTED_XOP | \ + BRIDGE_ISR_BAD_XREQ_PKT | \ + BRIDGE_ISR_REQ_XTLK_ERR | \ + BRIDGE_ISR_INVLD_ADDR) +#define BRIDGE_IRR_LLP_GRP (BRIDGE_ISR_LLP_REC_SNERR | \ + BRIDGE_ISR_LLP_REC_CBERR | \ + BRIDGE_ISR_LLP_RCTY | \ + BRIDGE_ISR_LLP_TX_RETRY | \ + BRIDGE_ISR_LLP_TCTY) +#define BRIDGE_IRR_SSRAM_GRP (BRIDGE_ISR_SSRAM_PERR | \ + BRIDGE_ISR_PMU_ESIZE_FAULT) +#define BRIDGE_IRR_PCI_GRP (BRIDGE_ISR_PCI_ABORT | \ + BRIDGE_ISR_PCI_PARITY | \ + BRIDGE_ISR_PCI_SERR | \ + BRIDGE_ISR_PCI_PERR | \ + BRIDGE_ISR_PCI_MST_TIMEOUT | \ + BRIDGE_ISR_PCI_RETRY_CNT) + +#define BRIDGE_IRR_GIO_GRP (BRIDGE_ISR_GIO_B_ENBL_ERR | \ + BRIDGE_ISR_GIO_MST_TIMEOUT) + +/* Bridge INT_DEV register bits definition */ +#define BRIDGE_INT_DEV_SHFT(n) ((n)*3) +#define BRIDGE_INT_DEV_MASK(n) (0x7 << BRIDGE_INT_DEV_SHFT(n)) +#define BRIDGE_INT_DEV_SET(_dev, _line) (_dev << BRIDGE_INT_DEV_SHFT(_line)) + +/* Bridge interrupt(x) register bits definition */ +#define BRIDGE_INT_ADDR_HOST 0x0003FF00 +#define BRIDGE_INT_ADDR_FLD 0x000000FF + +#define BRIDGE_TMO_PCI_RETRY_HLD_MASK 0x1f0000 +#define BRIDGE_TMO_GIO_TIMEOUT_MASK 0x001000 +#define BRIDGE_TMO_PCI_RETRY_CNT_MASK 0x0003ff + +#define BRIDGE_TMO_PCI_RETRY_CNT_MAX 0x3ff + +/* + * The NASID should be shifted by this amount and stored into the + * interrupt(x) register. + */ +#define BRIDGE_INT_ADDR_NASID_SHFT 8 + +/* + * The BRIDGE_INT_ADDR_DEST_IO bit should be set to send an interrupt to + * memory. + */ +#define BRIDGE_INT_ADDR_DEST_IO (1 << 17) +#define BRIDGE_INT_ADDR_DEST_MEM 0 +#define BRIDGE_INT_ADDR_MASK (1 << 17) + +/* Bridge device(x) register bits definition */ +#define BRIDGE_DEV_ERR_LOCK_EN 0x10000000 +#define BRIDGE_DEV_PAGE_CHK_DIS 0x08000000 +#define BRIDGE_DEV_FORCE_PCI_PAR 0x04000000 +#define BRIDGE_DEV_VIRTUAL_EN 0x02000000 +#define BRIDGE_DEV_PMU_WRGA_EN 0x01000000 +#define BRIDGE_DEV_DIR_WRGA_EN 0x00800000 +#define BRIDGE_DEV_DEV_SIZE 0x00400000 +#define BRIDGE_DEV_RT 0x00200000 +#define BRIDGE_DEV_SWAP_PMU 0x00100000 +#define BRIDGE_DEV_SWAP_DIR 0x00080000 +#define BRIDGE_DEV_PREF 0x00040000 +#define BRIDGE_DEV_PRECISE 0x00020000 +#define BRIDGE_DEV_COH 0x00010000 +#define BRIDGE_DEV_BARRIER 0x00008000 +#define BRIDGE_DEV_GBR 0x00004000 +#define BRIDGE_DEV_DEV_SWAP 0x00002000 +#define BRIDGE_DEV_DEV_IO_MEM 0x00001000 +#define BRIDGE_DEV_OFF_MASK 0x00000fff +#define BRIDGE_DEV_OFF_ADDR_SHFT 20 + +#define BRIDGE_DEV_PMU_BITS (BRIDGE_DEV_PMU_WRGA_EN | \ + BRIDGE_DEV_SWAP_PMU) +#define BRIDGE_DEV_D32_BITS (BRIDGE_DEV_DIR_WRGA_EN | \ + BRIDGE_DEV_SWAP_DIR | \ + BRIDGE_DEV_PREF | \ + BRIDGE_DEV_PRECISE | \ + BRIDGE_DEV_COH | \ + BRIDGE_DEV_BARRIER) +#define BRIDGE_DEV_D64_BITS (BRIDGE_DEV_DIR_WRGA_EN | \ + BRIDGE_DEV_SWAP_DIR | \ + BRIDGE_DEV_COH | \ + BRIDGE_DEV_BARRIER) + +/* Bridge Error Upper register bit field definition */ +#define BRIDGE_ERRUPPR_DEVMASTER (0x1 << 20) /* Device was master */ +#define BRIDGE_ERRUPPR_PCIVDEV (0x1 << 19) /* Virtual Req value */ +#define BRIDGE_ERRUPPR_DEVNUM_SHFT (16) +#define BRIDGE_ERRUPPR_DEVNUM_MASK (0x7 << BRIDGE_ERRUPPR_DEVNUM_SHFT) +#define BRIDGE_ERRUPPR_DEVICE(err) (((err) >> BRIDGE_ERRUPPR_DEVNUM_SHFT) & 0x7) +#define BRIDGE_ERRUPPR_ADDRMASK (0xFFFF) + +/* Bridge interrupt mode register bits definition */ +#define BRIDGE_INTMODE_CLR_PKT_EN(x) (0x1 << (x)) + +/* this should be written to the xbow's link_control(x) register */ +#define BRIDGE_CREDIT 3 + +/* RRB assignment register */ +#define BRIDGE_RRB_EN 0x8 /* after shifting down */ +#define BRIDGE_RRB_DEV 0x7 /* after shifting down */ +#define BRIDGE_RRB_VDEV 0x4 /* after shifting down */ +#define BRIDGE_RRB_PDEV 0x3 /* after shifting down */ + +/* RRB status register */ +#define BRIDGE_RRB_VALID(r) (0x00010000<<(r)) +#define BRIDGE_RRB_INUSE(r) (0x00000001<<(r)) + +/* RRB clear register */ +#define BRIDGE_RRB_CLEAR(r) (0x00000001<<(r)) + +/* xbox system controller declarations */ +#define XBOX_BRIDGE_WID 8 +#define FLASH_PROM1_BASE 0xE00000 /* To read the xbox sysctlr status */ +#define XBOX_RPS_EXISTS 1 << 6 /* RPS bit in status register */ +#define XBOX_RPS_FAIL 1 << 4 /* RPS status bit in register */ + +/* ======================================================================== + */ +/* + * Macros for Xtalk to Bridge bus (PCI/GIO) PIO + * refer to section 4.2.1 of Bridge Spec for xtalk to PCI/GIO PIO mappings + */ +/* XTALK addresses that map into Bridge Bus addr space */ +#define BRIDGE_PIO32_XTALK_ALIAS_BASE 0x000040000000L +#define BRIDGE_PIO32_XTALK_ALIAS_LIMIT 0x00007FFFFFFFL +#define BRIDGE_PIO64_XTALK_ALIAS_BASE 0x000080000000L +#define BRIDGE_PIO64_XTALK_ALIAS_LIMIT 0x0000BFFFFFFFL +#define BRIDGE_PCIIO_XTALK_ALIAS_BASE 0x000100000000L +#define BRIDGE_PCIIO_XTALK_ALIAS_LIMIT 0x0001FFFFFFFFL + +/* Ranges of PCI bus space that can be accessed via PIO from xtalk */ +#define BRIDGE_MIN_PIO_ADDR_MEM 0x00000000 /* 1G PCI memory space */ +#define BRIDGE_MAX_PIO_ADDR_MEM 0x3fffffff +#define BRIDGE_MIN_PIO_ADDR_IO 0x00000000 /* 4G PCI IO space */ +#define BRIDGE_MAX_PIO_ADDR_IO 0xffffffff + +/* XTALK addresses that map into PCI addresses */ +#define BRIDGE_PCI_MEM32_BASE BRIDGE_PIO32_XTALK_ALIAS_BASE +#define BRIDGE_PCI_MEM32_LIMIT BRIDGE_PIO32_XTALK_ALIAS_LIMIT +#define BRIDGE_PCI_MEM64_BASE BRIDGE_PIO64_XTALK_ALIAS_BASE +#define BRIDGE_PCI_MEM64_LIMIT BRIDGE_PIO64_XTALK_ALIAS_LIMIT +#define BRIDGE_PCI_IO_BASE BRIDGE_PCIIO_XTALK_ALIAS_BASE +#define BRIDGE_PCI_IO_LIMIT BRIDGE_PCIIO_XTALK_ALIAS_LIMIT + +/* + * Macros for Bridge bus (PCI/GIO) to Xtalk DMA + */ +/* Bridge Bus DMA addresses */ +#define BRIDGE_LOCAL_BASE 0 +#define BRIDGE_DMA_MAPPED_BASE 0x40000000 +#define BRIDGE_DMA_MAPPED_SIZE 0x40000000 /* 1G Bytes */ +#define BRIDGE_DMA_DIRECT_BASE 0x80000000 +#define BRIDGE_DMA_DIRECT_SIZE 0x80000000 /* 2G Bytes */ + +#define PCI32_LOCAL_BASE BRIDGE_LOCAL_BASE + +/* PCI addresses of regions decoded by Bridge for DMA */ +#define PCI32_MAPPED_BASE BRIDGE_DMA_MAPPED_BASE +#define PCI32_DIRECT_BASE BRIDGE_DMA_DIRECT_BASE + +#define IS_PCI32_LOCAL(x) ((ulong_t)(x) < PCI32_MAPPED_BASE) +#define IS_PCI32_MAPPED(x) ((ulong_t)(x) < PCI32_DIRECT_BASE && \ + (ulong_t)(x) >= PCI32_MAPPED_BASE) +#define IS_PCI32_DIRECT(x) ((ulong_t)(x) >= PCI32_MAPPED_BASE) +#define IS_PCI64(x) ((ulong_t)(x) >= PCI64_BASE) + +/* + * The GIO address space. + */ +/* Xtalk to GIO PIO */ +#define BRIDGE_GIO_MEM32_BASE BRIDGE_PIO32_XTALK_ALIAS_BASE +#define BRIDGE_GIO_MEM32_LIMIT BRIDGE_PIO32_XTALK_ALIAS_LIMIT + +#define GIO_LOCAL_BASE BRIDGE_LOCAL_BASE + +/* GIO addresses of regions decoded by Bridge for DMA */ +#define GIO_MAPPED_BASE BRIDGE_DMA_MAPPED_BASE +#define GIO_DIRECT_BASE BRIDGE_DMA_DIRECT_BASE + +#define IS_GIO_LOCAL(x) ((ulong_t)(x) < GIO_MAPPED_BASE) +#define IS_GIO_MAPPED(x) ((ulong_t)(x) < GIO_DIRECT_BASE && \ + (ulong_t)(x) >= GIO_MAPPED_BASE) +#define IS_GIO_DIRECT(x) ((ulong_t)(x) >= GIO_MAPPED_BASE) + +/* PCI to xtalk mapping */ + +/* given a DIR_OFF value and a pci/gio 32 bits direct address, determine + * which xtalk address is accessed + */ +#define BRIDGE_DIRECT_32_SEG_SIZE BRIDGE_DMA_DIRECT_SIZE +#define BRIDGE_DIRECT_32_TO_XTALK(dir_off,adr) \ + ((dir_off) * BRIDGE_DIRECT_32_SEG_SIZE + \ + ((adr) & (BRIDGE_DIRECT_32_SEG_SIZE - 1)) + PHYS_RAMBASE) + +/* 64-bit address attribute masks */ +#define PCI64_ATTR_TARG_MASK 0xf000000000000000 +#define PCI64_ATTR_TARG_SHFT 60 +#define PCI64_ATTR_PREF 0x0800000000000000 +#define PCI64_ATTR_PREC 0x0400000000000000 +#define PCI64_ATTR_VIRTUAL 0x0200000000000000 +#define PCI64_ATTR_BAR 0x0100000000000000 +#define PCI64_ATTR_RMF_MASK 0x00ff000000000000 +#define PCI64_ATTR_RMF_SHFT 48 + +#ifndef __ASSEMBLY__ +/* Address translation entry for mapped pci32 accesses */ +typedef union ate_u { + u64 ent; + struct ate_s { + u64 rmf:16; + u64 addr:36; + u64 targ:4; + u64 reserved:3; + u64 barrier:1; + u64 prefetch:1; + u64 precise:1; + u64 coherent:1; + u64 valid:1; + } field; +} ate_t; +#endif /* !__ASSEMBLY__ */ + +#define ATE_V 0x01 +#define ATE_CO 0x02 +#define ATE_PREC 0x04 +#define ATE_PREF 0x08 +#define ATE_BAR 0x10 + +#define ATE_PFNSHIFT 12 +#define ATE_TIDSHIFT 8 +#define ATE_RMFSHIFT 48 + +#define mkate(xaddr, xid, attr) ((xaddr) & 0x0000fffffffff000ULL) | \ + ((xid)<<ATE_TIDSHIFT) | \ + (attr) + +#define BRIDGE_INTERNAL_ATES 128 + +struct bridge_controller { + struct pci_controller pc; + struct resource mem; + struct resource io; + bridge_t *base; + nasid_t nasid; + unsigned int widget_id; + unsigned int irq_cpu; + dma64_addr_t baddr; + unsigned int pci_int[8]; +}; + +#define BRIDGE_CONTROLLER(bus) \ + ((struct bridge_controller *)((bus)->sysdata)) + +extern void register_bridge_irq(unsigned int irq); +extern int request_bridge_irq(struct bridge_controller *bc); + +extern struct pci_ops bridge_pci_ops; + +#endif /* _ASM_PCI_BRIDGE_H */ diff --git a/arch/mips/include/asm/percpu.h b/arch/mips/include/asm/percpu.h new file mode 100644 index 000000000000..844e763e9332 --- /dev/null +++ b/arch/mips/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ASM_PERCPU_H +#define __ASM_PERCPU_H + +#include <asm-generic/percpu.h> + +#endif /* __ASM_PERCPU_H */ diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h new file mode 100644 index 000000000000..1275831dda29 --- /dev/null +++ b/arch/mips/include/asm/pgalloc.h @@ -0,0 +1,143 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 2001, 2003 by Ralf Baechle + * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. + */ +#ifndef _ASM_PGALLOC_H +#define _ASM_PGALLOC_H + +#include <linux/highmem.h> +#include <linux/mm.h> +#include <linux/sched.h> + +static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, + pte_t *pte) +{ + set_pmd(pmd, __pmd((unsigned long)pte)); +} + +static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, + pgtable_t pte) +{ + set_pmd(pmd, __pmd((unsigned long)page_address(pte))); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +/* + * Initialize a new pmd table with invalid pointers. + */ +extern void pmd_init(unsigned long page, unsigned long pagetable); + +#ifdef CONFIG_64BIT + +static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) +{ + set_pud(pud, __pud((unsigned long)pmd)); +} +#endif + +/* + * Initialize a new pgd / pmd table with invalid pointers. + */ +extern void pgd_init(unsigned long page); + +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + pgd_t *ret, *init; + + ret = (pgd_t *) __get_free_pages(GFP_KERNEL, PGD_ORDER); + if (ret) { + init = pgd_offset(&init_mm, 0UL); + pgd_init((unsigned long)ret); + memcpy(ret + USER_PTRS_PER_PGD, init + USER_PTRS_PER_PGD, + (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); + } + + return ret; +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + free_pages((unsigned long)pgd, PGD_ORDER); +} + +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + pte_t *pte; + + pte = (pte_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, PTE_ORDER); + + return pte; +} + +static inline struct page *pte_alloc_one(struct mm_struct *mm, + unsigned long address) +{ + struct page *pte; + + pte = alloc_pages(GFP_KERNEL | __GFP_REPEAT, PTE_ORDER); + if (pte) { + clear_highpage(pte); + pgtable_page_ctor(pte); + } + return pte; +} + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + free_pages((unsigned long)pte, PTE_ORDER); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t pte) +{ + pgtable_page_dtor(pte); + __free_pages(pte, PTE_ORDER); +} + +#define __pte_free_tlb(tlb,pte) \ +do { \ + pgtable_page_dtor(pte); \ + tlb_remove_page((tlb), pte); \ +} while (0) + +#ifdef CONFIG_32BIT + +/* + * allocating and freeing a pmd is trivial: the 1-entry pmd is + * inside the pgd, so has no extra memory associated with it. + */ +#define pmd_free(mm, x) do { } while (0) +#define __pmd_free_tlb(tlb, x) do { } while (0) + +#endif + +#ifdef CONFIG_64BIT + +static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) +{ + pmd_t *pmd; + + pmd = (pmd_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT, PMD_ORDER); + if (pmd) + pmd_init((unsigned long)pmd, (unsigned long)invalid_pte_table); + return pmd; +} + +static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) +{ + free_pages((unsigned long)pmd, PMD_ORDER); +} + +#define __pmd_free_tlb(tlb, x) pmd_free((tlb)->mm, x) + +#endif + +#define check_pgt_cache() do { } while (0) + +extern void pagetable_init(void); + +#endif /* _ASM_PGALLOC_H */ diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h new file mode 100644 index 000000000000..55813d6150c7 --- /dev/null +++ b/arch/mips/include/asm/pgtable-32.h @@ -0,0 +1,234 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle + * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. + */ +#ifndef _ASM_PGTABLE_32_H +#define _ASM_PGTABLE_32_H + +#include <asm/addrspace.h> +#include <asm/page.h> + +#include <linux/linkage.h> +#include <asm/cachectl.h> +#include <asm/fixmap.h> + +#include <asm-generic/pgtable-nopmd.h> + +/* + * - add_wired_entry() add a fixed TLB entry, and move wired register + */ +extern void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, + unsigned long entryhi, unsigned long pagemask); + +/* + * - add_temporary_entry() add a temporary TLB entry. We use TLB entries + * starting at the top and working down. This is for populating the + * TLB before trap_init() puts the TLB miss handler in place. It + * should be used only for entries matching the actual page tables, + * to prevent inconsistencies. + */ +extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, + unsigned long entryhi, unsigned long pagemask); + + +/* Basically we have the same two-level (which is the logical three level + * Linux page table layout folded) page tables as the i386. Some day + * when we have proper page coloring support we can have a 1% quicker + * tlb refill handling mechanism, but for now it is a bit slower but + * works even with the cache aliasing problem the R4k and above have. + */ + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define PGDIR_SHIFT (2 * PAGE_SHIFT + PTE_ORDER - PTE_T_LOG2) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * Entries per page directory level: we use two-level, so + * we don't really have any PUD/PMD directory physically. + */ +#define __PGD_ORDER (32 - 3 * PAGE_SHIFT + PGD_T_LOG2 + PTE_T_LOG2) +#define PGD_ORDER (__PGD_ORDER >= 0 ? __PGD_ORDER : 0) +#define PUD_ORDER aieeee_attempt_to_allocate_pud +#define PMD_ORDER 1 +#define PTE_ORDER 0 + +#define PTRS_PER_PGD (USER_PTRS_PER_PGD * 2) +#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t)) + +#define USER_PTRS_PER_PGD (0x80000000UL/PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +#define VMALLOC_START MAP_BASE + +#define PKMAP_BASE (0xfe000000UL) + +#ifdef CONFIG_HIGHMEM +# define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE) +#else +# define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE) +#endif + +#ifdef CONFIG_64BIT_PHYS_ADDR +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e)) +#else +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#endif +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +extern void load_pgd(unsigned long pg_dir); + +extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)]; + +/* + * Empty pgd/pmd entries point to the invalid_pte_table. + */ +static inline int pmd_none(pmd_t pmd) +{ + return pmd_val(pmd) == (unsigned long) invalid_pte_table; +} + +#define pmd_bad(pmd) (pmd_val(pmd) & ~PAGE_MASK) + +static inline int pmd_present(pmd_t pmd) +{ + return pmd_val(pmd) != (unsigned long) invalid_pte_table; +} + +static inline void pmd_clear(pmd_t *pmdp) +{ + pmd_val(*pmdp) = ((unsigned long) invalid_pte_table); +} + +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) +#define pte_page(x) pfn_to_page(pte_pfn(x)) +#define pte_pfn(x) ((unsigned long)((x).pte_high >> 6)) +static inline pte_t +pfn_pte(unsigned long pfn, pgprot_t prot) +{ + pte_t pte; + pte.pte_high = (pfn << 6) | (pgprot_val(prot) & 0x3f); + pte.pte_low = pgprot_val(prot); + return pte; +} + +#else + +#define pte_page(x) pfn_to_page(pte_pfn(x)) + +#ifdef CONFIG_CPU_VR41XX +#define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2))) +#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot)) +#else +#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT)) +#define pfn_pte(pfn, prot) __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#endif +#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */ + +#define __pgd_offset(address) pgd_index(address) +#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) +#define __pmd_offset(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) + +/* to find an entry in a page-table-directory */ +#define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr)) + +/* Find an entry in the third-level page table.. */ +#define __pte_offset(address) \ + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address)) + +#define pte_offset_map(dir, address) \ + ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address)) +#define pte_offset_map_nested(dir, address) \ + ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address)) +#define pte_unmap(pte) ((void)(pte)) +#define pte_unmap_nested(pte) ((void)(pte)) + +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + +/* Swap entries must have VALID bit cleared. */ +#define __swp_type(x) (((x).val >> 10) & 0x1f) +#define __swp_offset(x) ((x).val >> 15) +#define __swp_entry(type,offset) \ + ((swp_entry_t) { ((type) << 10) | ((offset) << 15) }) + +/* + * Bits 0, 4, 8, and 9 are taken, split up 28 bits of offset into this range: + */ +#define PTE_FILE_MAX_BITS 28 + +#define pte_to_pgoff(_pte) ((((_pte).pte >> 1 ) & 0x07) | \ + (((_pte).pte >> 2 ) & 0x38) | \ + (((_pte).pte >> 10) << 6 )) + +#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x07) << 1 ) | \ + (((off) & 0x38) << 2 ) | \ + (((off) >> 6 ) << 10) | \ + _PAGE_FILE }) + +#else + +/* Swap entries must have VALID and GLOBAL bits cleared. */ +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) +#define __swp_type(x) (((x).val >> 2) & 0x1f) +#define __swp_offset(x) ((x).val >> 7) +#define __swp_entry(type,offset) \ + ((swp_entry_t) { ((type) << 2) | ((offset) << 7) }) +#else +#define __swp_type(x) (((x).val >> 8) & 0x1f) +#define __swp_offset(x) ((x).val >> 13) +#define __swp_entry(type,offset) \ + ((swp_entry_t) { ((type) << 8) | ((offset) << 13) }) +#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */ + +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) +/* + * Bits 0 and 1 of pte_high are taken, use the rest for the page offset... + */ +#define PTE_FILE_MAX_BITS 30 + +#define pte_to_pgoff(_pte) ((_pte).pte_high >> 2) +#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) << 2 }) + +#else +/* + * Bits 0, 4, 6, and 7 are taken, split up 28 bits of offset into this range: + */ +#define PTE_FILE_MAX_BITS 28 + +#define pte_to_pgoff(_pte) ((((_pte).pte >> 1) & 0x7) | \ + (((_pte).pte >> 2) & 0x8) | \ + (((_pte).pte >> 8) << 4)) + +#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7) << 1) | \ + (((off) & 0x8) << 2) | \ + (((off) >> 4) << 8) | \ + _PAGE_FILE }) +#endif + +#endif + +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high }) +#define __swp_entry_to_pte(x) ((pte_t) { 0, (x).val }) +#else +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) +#endif + +#endif /* _ASM_PGTABLE_32_H */ diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h new file mode 100644 index 000000000000..943515f0ef87 --- /dev/null +++ b/arch/mips/include/asm/pgtable-64.h @@ -0,0 +1,253 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle + * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. + */ +#ifndef _ASM_PGTABLE_64_H +#define _ASM_PGTABLE_64_H + +#include <linux/linkage.h> + +#include <asm/addrspace.h> +#include <asm/page.h> +#include <asm/cachectl.h> +#include <asm/fixmap.h> + +#include <asm-generic/pgtable-nopud.h> + +/* + * Each address space has 2 4K pages as its page directory, giving 1024 + * (== PTRS_PER_PGD) 8 byte pointers to pmd tables. Each pmd table is a + * single 4K page, giving 512 (== PTRS_PER_PMD) 8 byte pointers to page + * tables. Each page table is also a single 4K page, giving 512 (== + * PTRS_PER_PTE) 8 byte ptes. Each pud entry is initialized to point to + * invalid_pmd_table, each pmd entry is initialized to point to + * invalid_pte_table, each pte is initialized to 0. When memory is low, + * and a pmd table or a page table allocation fails, empty_bad_pmd_table + * and empty_bad_page_table is returned back to higher layer code, so + * that the failure is recognized later on. Linux does not seem to + * handle these failures very well though. The empty_bad_page_table has + * invalid pte entries in it, to force page faults. + * + * Kernel mappings: kernel mappings are held in the swapper_pg_table. + * The layout is identical to userspace except it's indexed with the + * fault address - VMALLOC_START. + */ + +/* PMD_SHIFT determines the size of the area a second-level page table can map */ +#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT + PTE_ORDER - 3)) +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define PGDIR_SHIFT (PMD_SHIFT + (PAGE_SHIFT + PMD_ORDER - 3)) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * For 4kB page size we use a 3 level page tree and an 8kB pud, which + * permits us mapping 40 bits of virtual address space. + * + * We used to implement 41 bits by having an order 1 pmd level but that seemed + * rather pointless. + * + * For 8kB page size we use a 3 level page tree which permits a total of + * 8TB of address space. Alternatively a 33-bit / 8GB organization using + * two levels would be easy to implement. + * + * For 16kB page size we use a 2 level page tree which permits a total of + * 36 bits of virtual address space. We could add a third level but it seems + * like at the moment there's no need for this. + * + * For 64kB page size we use a 2 level page table tree for a total of 42 bits + * of virtual address space. + */ +#ifdef CONFIG_PAGE_SIZE_4KB +#define PGD_ORDER 1 +#define PUD_ORDER aieeee_attempt_to_allocate_pud +#define PMD_ORDER 0 +#define PTE_ORDER 0 +#endif +#ifdef CONFIG_PAGE_SIZE_8KB +#define PGD_ORDER 0 +#define PUD_ORDER aieeee_attempt_to_allocate_pud +#define PMD_ORDER 0 +#define PTE_ORDER 0 +#endif +#ifdef CONFIG_PAGE_SIZE_16KB +#define PGD_ORDER 0 +#define PUD_ORDER aieeee_attempt_to_allocate_pud +#define PMD_ORDER 0 +#define PTE_ORDER 0 +#endif +#ifdef CONFIG_PAGE_SIZE_64KB +#define PGD_ORDER 0 +#define PUD_ORDER aieeee_attempt_to_allocate_pud +#define PMD_ORDER 0 +#define PTE_ORDER 0 +#endif + +#define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t)) +#define PTRS_PER_PMD ((PAGE_SIZE << PMD_ORDER) / sizeof(pmd_t)) +#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t)) + +#if PGDIR_SIZE >= TASK_SIZE +#define USER_PTRS_PER_PGD (1) +#else +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) +#endif +#define FIRST_USER_ADDRESS 0UL + +#define VMALLOC_START MAP_BASE +#define VMALLOC_END \ + (VMALLOC_START + PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE) +#if defined(CONFIG_MODULES) && defined(KBUILD_64BIT_SYM32) && \ + VMALLOC_START != CKSSEG +/* Load modules into 32bit-compatible segment. */ +#define MODULE_START CKSSEG +#define MODULE_END (FIXADDR_START-2*PAGE_SIZE) +extern pgd_t module_pg_dir[PTRS_PER_PGD]; +#endif + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pmd_ERROR(e) \ + printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e)) + +extern pte_t invalid_pte_table[PTRS_PER_PTE]; +extern pte_t empty_bad_page_table[PTRS_PER_PTE]; +extern pmd_t invalid_pmd_table[PTRS_PER_PMD]; +extern pmd_t empty_bad_pmd_table[PTRS_PER_PMD]; + +/* + * Empty pgd/pmd entries point to the invalid_pte_table. + */ +static inline int pmd_none(pmd_t pmd) +{ + return pmd_val(pmd) == (unsigned long) invalid_pte_table; +} + +#define pmd_bad(pmd) (pmd_val(pmd) & ~PAGE_MASK) + +static inline int pmd_present(pmd_t pmd) +{ + return pmd_val(pmd) != (unsigned long) invalid_pte_table; +} + +static inline void pmd_clear(pmd_t *pmdp) +{ + pmd_val(*pmdp) = ((unsigned long) invalid_pte_table); +} + +/* + * Empty pud entries point to the invalid_pmd_table. + */ +static inline int pud_none(pud_t pud) +{ + return pud_val(pud) == (unsigned long) invalid_pmd_table; +} + +static inline int pud_bad(pud_t pud) +{ + return pud_val(pud) & ~PAGE_MASK; +} + +static inline int pud_present(pud_t pud) +{ + return pud_val(pud) != (unsigned long) invalid_pmd_table; +} + +static inline void pud_clear(pud_t *pudp) +{ + pud_val(*pudp) = ((unsigned long) invalid_pmd_table); +} + +#define pte_page(x) pfn_to_page(pte_pfn(x)) + +#ifdef CONFIG_CPU_VR41XX +#define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2))) +#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot)) +#else +#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT)) +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#endif + +#define __pgd_offset(address) pgd_index(address) +#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) +#define __pmd_offset(address) pmd_index(address) + +/* to find an entry in a kernel page-table-directory */ +#ifdef MODULE_START +#define pgd_offset_k(address) \ + ((address) >= MODULE_START ? module_pg_dir : pgd_offset(&init_mm, 0UL)) +#else +#define pgd_offset_k(address) pgd_offset(&init_mm, 0UL) +#endif + +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) + +/* to find an entry in a page-table-directory */ +#define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr)) + +static inline unsigned long pud_page_vaddr(pud_t pud) +{ + return pud_val(pud); +} +#define pud_phys(pud) virt_to_phys((void *)pud_val(pud)) +#define pud_page(pud) (pfn_to_page(pud_phys(pud) >> PAGE_SHIFT)) + +/* Find an entry in the second-level page table.. */ +static inline pmd_t *pmd_offset(pud_t * pud, unsigned long address) +{ + return (pmd_t *) pud_page_vaddr(*pud) + pmd_index(address); +} + +/* Find an entry in the third-level page table.. */ +#define __pte_offset(address) \ + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address)) +#define pte_offset_map(dir, address) \ + ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address)) +#define pte_offset_map_nested(dir, address) \ + ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address)) +#define pte_unmap(pte) ((void)(pte)) +#define pte_unmap_nested(pte) ((void)(pte)) + +/* + * Initialize a new pgd / pmd table with invalid pointers. + */ +extern void pgd_init(unsigned long page); +extern void pmd_init(unsigned long page, unsigned long pagetable); + +/* + * Non-present pages: high 24 bits are offset, next 8 bits type, + * low 32 bits zero. + */ +static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset) +{ pte_t pte; pte_val(pte) = (type << 32) | (offset << 40); return pte; } + +#define __swp_type(x) (((x).val >> 32) & 0xff) +#define __swp_offset(x) ((x).val >> 40) +#define __swp_entry(type, offset) ((swp_entry_t) { pte_val(mk_swap_pte((type), (offset))) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +/* + * Bits 0, 4, 6, and 7 are taken. Let's leave bits 1, 2, 3, and 5 alone to + * make things easier, and only use the upper 56 bits for the page offset... + */ +#define PTE_FILE_MAX_BITS 56 + +#define pte_to_pgoff(_pte) ((_pte).pte >> 8) +#define pgoff_to_pte(off) ((pte_t) { ((off) << 8) | _PAGE_FILE }) + +#endif /* _ASM_PGTABLE_64_H */ diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h new file mode 100644 index 000000000000..51b34a48c84a --- /dev/null +++ b/arch/mips/include/asm/pgtable-bits.h @@ -0,0 +1,137 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 2002 by Ralf Baechle + * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. + * Copyright (C) 2002 Maciej W. Rozycki + */ +#ifndef _ASM_PGTABLE_BITS_H +#define _ASM_PGTABLE_BITS_H + + +/* + * Note that we shift the lower 32bits of each EntryLo[01] entry + * 6 bits to the left. That way we can convert the PFN into the + * physical address by a single 'and' operation and gain 6 additional + * bits for storing information which isn't present in a normal + * MIPS page table. + * + * Similar to the Alpha port, we need to keep track of the ref + * and mod bits in software. We have a software "yeah you can read + * from this page" bit, and a hardware one which actually lets the + * process read from the page. On the same token we have a software + * writable bit and the real hardware one which actually lets the + * process write to the page, this keeps a mod bit via the hardware + * dirty bit. + * + * Certain revisions of the R4000 and R5000 have a bug where if a + * certain sequence occurs in the last 3 instructions of an executable + * page, and the following page is not mapped, the cpu can do + * unpredictable things. The code (when it is written) to deal with + * this problem will be in the update_mmu_cache() code for the r4k. + */ +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) + +#define _PAGE_PRESENT (1<<6) /* implemented in software */ +#define _PAGE_READ (1<<7) /* implemented in software */ +#define _PAGE_WRITE (1<<8) /* implemented in software */ +#define _PAGE_ACCESSED (1<<9) /* implemented in software */ +#define _PAGE_MODIFIED (1<<10) /* implemented in software */ +#define _PAGE_FILE (1<<10) /* set:pagecache unset:swap */ + +#define _PAGE_R4KBUG (1<<0) /* workaround for r4k bug */ +#define _PAGE_GLOBAL (1<<0) +#define _PAGE_VALID (1<<1) +#define _PAGE_SILENT_READ (1<<1) /* synonym */ +#define _PAGE_DIRTY (1<<2) /* The MIPS dirty bit */ +#define _PAGE_SILENT_WRITE (1<<2) +#define _CACHE_SHIFT 3 +#define _CACHE_MASK (7<<3) + +#else + +#define _PAGE_PRESENT (1<<0) /* implemented in software */ +#define _PAGE_READ (1<<1) /* implemented in software */ +#define _PAGE_WRITE (1<<2) /* implemented in software */ +#define _PAGE_ACCESSED (1<<3) /* implemented in software */ +#define _PAGE_MODIFIED (1<<4) /* implemented in software */ +#define _PAGE_FILE (1<<4) /* set:pagecache unset:swap */ + +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + +#define _PAGE_GLOBAL (1<<8) +#define _PAGE_VALID (1<<9) +#define _PAGE_SILENT_READ (1<<9) /* synonym */ +#define _PAGE_DIRTY (1<<10) /* The MIPS dirty bit */ +#define _PAGE_SILENT_WRITE (1<<10) +#define _CACHE_UNCACHED (1<<11) +#define _CACHE_MASK (1<<11) + +#else + +#define _PAGE_R4KBUG (1<<5) /* workaround for r4k bug */ +#define _PAGE_GLOBAL (1<<6) +#define _PAGE_VALID (1<<7) +#define _PAGE_SILENT_READ (1<<7) /* synonym */ +#define _PAGE_DIRTY (1<<8) /* The MIPS dirty bit */ +#define _PAGE_SILENT_WRITE (1<<8) +#define _CACHE_SHIFT 9 +#define _CACHE_MASK (7<<9) + +#endif +#endif /* defined(CONFIG_64BIT_PHYS_ADDR && defined(CONFIG_CPU_MIPS32) */ + + +/* + * Cache attributes + */ +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + +#define _CACHE_CACHABLE_NONCOHERENT 0 + +#elif defined(CONFIG_CPU_SB1) + +/* No penalty for being coherent on the SB1, so just + use it for "noncoherent" spaces, too. Shouldn't hurt. */ + +#define _CACHE_UNCACHED (2<<_CACHE_SHIFT) +#define _CACHE_CACHABLE_COW (5<<_CACHE_SHIFT) +#define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT) +#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT) + +#elif defined(CONFIG_CPU_RM9000) + +#define _CACHE_WT (0<<_CACHE_SHIFT) +#define _CACHE_WTWA (1<<_CACHE_SHIFT) +#define _CACHE_UC_B (2<<_CACHE_SHIFT) +#define _CACHE_WB (3<<_CACHE_SHIFT) +#define _CACHE_CWBEA (4<<_CACHE_SHIFT) +#define _CACHE_CWB (5<<_CACHE_SHIFT) +#define _CACHE_UCNB (6<<_CACHE_SHIFT) +#define _CACHE_FPC (7<<_CACHE_SHIFT) + +#define _CACHE_UNCACHED _CACHE_UC_B +#define _CACHE_CACHABLE_NONCOHERENT _CACHE_WB + +#else + +#define _CACHE_CACHABLE_NO_WA (0<<_CACHE_SHIFT) /* R4600 only */ +#define _CACHE_CACHABLE_WA (1<<_CACHE_SHIFT) /* R4600 only */ +#define _CACHE_UNCACHED (2<<_CACHE_SHIFT) /* R4[0246]00 */ +#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT) /* R4[0246]00 */ +#define _CACHE_CACHABLE_CE (4<<_CACHE_SHIFT) /* R4[04]00MC only */ +#define _CACHE_CACHABLE_COW (5<<_CACHE_SHIFT) /* R4[04]00MC only */ +#define _CACHE_CACHABLE_COHERENT (5<<_CACHE_SHIFT) /* MIPS32R2 CMP */ +#define _CACHE_CACHABLE_CUW (6<<_CACHE_SHIFT) /* R4[04]00MC only */ +#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT) /* R10000 only */ + +#endif + +#define __READABLE (_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED) +#define __WRITEABLE (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED) + +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK) + +#endif /* _ASM_PGTABLE_BITS_H */ diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h new file mode 100644 index 000000000000..6a0edf72ffbc --- /dev/null +++ b/arch/mips/include/asm/pgtable.h @@ -0,0 +1,383 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Ralf Baechle + */ +#ifndef _ASM_PGTABLE_H +#define _ASM_PGTABLE_H + +#ifdef CONFIG_32BIT +#include <asm/pgtable-32.h> +#endif +#ifdef CONFIG_64BIT +#include <asm/pgtable-64.h> +#endif + +#include <asm/io.h> +#include <asm/pgtable-bits.h> + +struct mm_struct; +struct vm_area_struct; + +#define PAGE_NONE __pgprot(_PAGE_PRESENT | _CACHE_CACHABLE_NONCOHERENT) +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ + _page_cachable_default) +#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_READ | \ + _page_cachable_default) +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_READ | \ + _page_cachable_default) +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \ + _PAGE_GLOBAL | _page_cachable_default) +#define PAGE_USERIO __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ + _page_cachable_default) +#define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \ + __WRITEABLE | _PAGE_GLOBAL | _CACHE_UNCACHED) + +/* + * MIPS can't do page protection for execute, and considers that the same like + * read. Also, write permissions imply read permissions. This is the closest + * we can get by reasonable means.. + */ + +/* + * Dummy values to fill the table in mmap.c + * The real values will be generated at runtime + */ +#define __P000 __pgprot(0) +#define __P001 __pgprot(0) +#define __P010 __pgprot(0) +#define __P011 __pgprot(0) +#define __P100 __pgprot(0) +#define __P101 __pgprot(0) +#define __P110 __pgprot(0) +#define __P111 __pgprot(0) + +#define __S000 __pgprot(0) +#define __S001 __pgprot(0) +#define __S010 __pgprot(0) +#define __S011 __pgprot(0) +#define __S100 __pgprot(0) +#define __S101 __pgprot(0) +#define __S110 __pgprot(0) +#define __S111 __pgprot(0) + +extern unsigned long _page_cachable_default; + +/* + * ZERO_PAGE is a global shared page that is always zero; used + * for zero-mapped memory areas etc.. + */ + +extern unsigned long empty_zero_page; +extern unsigned long zero_page_mask; + +#define ZERO_PAGE(vaddr) \ + (virt_to_page((void *)(empty_zero_page + (((unsigned long)(vaddr)) & zero_page_mask)))) + +extern void paging_init(void); + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +#define pmd_phys(pmd) virt_to_phys((void *)pmd_val(pmd)) +#define pmd_page(pmd) (pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT)) +#define pmd_page_vaddr(pmd) pmd_val(pmd) + +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) + +#define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL)) +#define pte_present(pte) ((pte).pte_low & _PAGE_PRESENT) + +static inline void set_pte(pte_t *ptep, pte_t pte) +{ + ptep->pte_high = pte.pte_high; + smp_wmb(); + ptep->pte_low = pte.pte_low; + //printk("pte_high %x pte_low %x\n", ptep->pte_high, ptep->pte_low); + + if (pte.pte_low & _PAGE_GLOBAL) { + pte_t *buddy = ptep_buddy(ptep); + /* + * Make sure the buddy is global too (if it's !none, + * it better already be global) + */ + if (pte_none(*buddy)) { + buddy->pte_low |= _PAGE_GLOBAL; + buddy->pte_high |= _PAGE_GLOBAL; + } + } +} +#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval) + +static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + pte_t null = __pte(0); + + /* Preserve global status for the pair */ + if (ptep_buddy(ptep)->pte_low & _PAGE_GLOBAL) + null.pte_low = null.pte_high = _PAGE_GLOBAL; + + set_pte_at(mm, addr, ptep, null); +} +#else + +#define pte_none(pte) (!(pte_val(pte) & ~_PAGE_GLOBAL)) +#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) + +/* + * Certain architectures need to do special things when pte's + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +static inline void set_pte(pte_t *ptep, pte_t pteval) +{ + *ptep = pteval; +#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX) + if (pte_val(pteval) & _PAGE_GLOBAL) { + pte_t *buddy = ptep_buddy(ptep); + /* + * Make sure the buddy is global too (if it's !none, + * it better already be global) + */ + if (pte_none(*buddy)) + pte_val(*buddy) = pte_val(*buddy) | _PAGE_GLOBAL; + } +#endif +} +#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval) + +static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ +#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX) + /* Preserve global status for the pair */ + if (pte_val(*ptep_buddy(ptep)) & _PAGE_GLOBAL) + set_pte_at(mm, addr, ptep, __pte(_PAGE_GLOBAL)); + else +#endif + set_pte_at(mm, addr, ptep, __pte(0)); +} +#endif + +/* + * (pmds are folded into puds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pmd(pmdptr, pmdval) do { *(pmdptr) = (pmdval); } while(0) + +#ifdef CONFIG_64BIT +/* + * (puds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0) +#endif + +#define PGD_T_LOG2 (__builtin_ffs(sizeof(pgd_t)) - 1) +#define PMD_T_LOG2 (__builtin_ffs(sizeof(pmd_t)) - 1) +#define PTE_T_LOG2 (__builtin_ffs(sizeof(pte_t)) - 1) + +/* + * We used to declare this array with size but gcc 3.3 and older are not able + * to find that this expression is a constant, so the size is dropped. + */ +extern pgd_t swapper_pg_dir[]; + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) +static inline int pte_write(pte_t pte) { return pte.pte_low & _PAGE_WRITE; } +static inline int pte_dirty(pte_t pte) { return pte.pte_low & _PAGE_MODIFIED; } +static inline int pte_young(pte_t pte) { return pte.pte_low & _PAGE_ACCESSED; } +static inline int pte_file(pte_t pte) { return pte.pte_low & _PAGE_FILE; } + +static inline pte_t pte_wrprotect(pte_t pte) +{ + pte.pte_low &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE); + pte.pte_high &= ~_PAGE_SILENT_WRITE; + return pte; +} + +static inline pte_t pte_mkclean(pte_t pte) +{ + pte.pte_low &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE); + pte.pte_high &= ~_PAGE_SILENT_WRITE; + return pte; +} + +static inline pte_t pte_mkold(pte_t pte) +{ + pte.pte_low &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ); + pte.pte_high &= ~_PAGE_SILENT_READ; + return pte; +} + +static inline pte_t pte_mkwrite(pte_t pte) +{ + pte.pte_low |= _PAGE_WRITE; + if (pte.pte_low & _PAGE_MODIFIED) { + pte.pte_low |= _PAGE_SILENT_WRITE; + pte.pte_high |= _PAGE_SILENT_WRITE; + } + return pte; +} + +static inline pte_t pte_mkdirty(pte_t pte) +{ + pte.pte_low |= _PAGE_MODIFIED; + if (pte.pte_low & _PAGE_WRITE) { + pte.pte_low |= _PAGE_SILENT_WRITE; + pte.pte_high |= _PAGE_SILENT_WRITE; + } + return pte; +} + +static inline pte_t pte_mkyoung(pte_t pte) +{ + pte.pte_low |= _PAGE_ACCESSED; + if (pte.pte_low & _PAGE_READ) { + pte.pte_low |= _PAGE_SILENT_READ; + pte.pte_high |= _PAGE_SILENT_READ; + } + return pte; +} +#else +static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; } +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_MODIFIED; } +static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } + +static inline pte_t pte_wrprotect(pte_t pte) +{ + pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE); + return pte; +} + +static inline pte_t pte_mkclean(pte_t pte) +{ + pte_val(pte) &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE); + return pte; +} + +static inline pte_t pte_mkold(pte_t pte) +{ + pte_val(pte) &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ); + return pte; +} + +static inline pte_t pte_mkwrite(pte_t pte) +{ + pte_val(pte) |= _PAGE_WRITE; + if (pte_val(pte) & _PAGE_MODIFIED) + pte_val(pte) |= _PAGE_SILENT_WRITE; + return pte; +} + +static inline pte_t pte_mkdirty(pte_t pte) +{ + pte_val(pte) |= _PAGE_MODIFIED; + if (pte_val(pte) & _PAGE_WRITE) + pte_val(pte) |= _PAGE_SILENT_WRITE; + return pte; +} + +static inline pte_t pte_mkyoung(pte_t pte) +{ + pte_val(pte) |= _PAGE_ACCESSED; + if (pte_val(pte) & _PAGE_READ) + pte_val(pte) |= _PAGE_SILENT_READ; + return pte; +} +#endif +static inline int pte_special(pte_t pte) { return 0; } +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +/* + * Macro to make mark a page protection value as "uncacheable". Note + * that "protection" is really a misnomer here as the protection value + * contains the memory attribute bits, dirty bits, and various other + * bits as well. + */ +#define pgprot_noncached pgprot_noncached + +static inline pgprot_t pgprot_noncached(pgprot_t _prot) +{ + unsigned long prot = pgprot_val(_prot); + + prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED; + + return __pgprot(prot); +} + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) + +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte.pte_low &= _PAGE_CHG_MASK; + pte.pte_high &= ~0x3f; + pte.pte_low |= pgprot_val(newprot); + pte.pte_high |= pgprot_val(newprot) & 0x3f; + return pte; +} +#else +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)); +} +#endif + + +extern void __update_tlb(struct vm_area_struct *vma, unsigned long address, + pte_t pte); +extern void __update_cache(struct vm_area_struct *vma, unsigned long address, + pte_t pte); + +static inline void update_mmu_cache(struct vm_area_struct *vma, + unsigned long address, pte_t pte) +{ + __update_tlb(vma, address, pte); + __update_cache(vma, address, pte); +} + +#define kern_addr_valid(addr) (1) + +#ifdef CONFIG_64BIT_PHYS_ADDR +extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot); + +static inline int io_remap_pfn_range(struct vm_area_struct *vma, + unsigned long vaddr, + unsigned long pfn, + unsigned long size, + pgprot_t prot) +{ + phys_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size); + return remap_pfn_range(vma, vaddr, phys_addr_high >> PAGE_SHIFT, size, prot); +} +#else +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) +#endif + +#include <asm-generic/pgtable.h> + +/* + * We provide our own get_unmapped area to cope with the virtual aliasing + * constraints placed on us by the cache architecture. + */ +#define HAVE_ARCH_UNMAPPED_AREA + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +#endif /* _ASM_PGTABLE_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h b/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h new file mode 100644 index 000000000000..ebdbab973e41 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h @@ -0,0 +1,46 @@ +/* + * include/asm-mips/pmc-sierra/msp71xx/gpio.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * @author Patrick Glass <patrickglass@gmail.com> + */ + +#ifndef __PMC_MSP71XX_GPIO_H +#define __PMC_MSP71XX_GPIO_H + +/* Max number of gpio's is 28 on chip plus 3 banks of I2C IO Expanders */ +#define ARCH_NR_GPIOS (28 + (3 * 8)) + +/* new generic GPIO API - see Documentation/gpio.txt */ +#include <asm-generic/gpio.h> + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep + +/* Setup calls for the gpio and gpio extended */ +extern void msp71xx_init_gpio(void); +extern void msp71xx_init_gpio_extended(void); +extern int msp71xx_set_output_drive(unsigned gpio, int value); + +/* Custom output drive functionss */ +static inline int gpio_set_output_drive(unsigned gpio, int value) +{ + return msp71xx_set_output_drive(gpio, value); +} + +/* IRQ's are not supported for gpio lines */ +static inline int gpio_to_irq(unsigned gpio) +{ + return -EINVAL; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return -EINVAL; +} + +#endif /* __PMC_MSP71XX_GPIO_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h new file mode 100644 index 000000000000..c84bcf9570b1 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h @@ -0,0 +1,151 @@ +/* + * Defines for the MSP interrupt controller. + * + * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved. + * Author: Carsten Langgaard, carstenl@mips.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#ifndef _MSP_CIC_INT_H +#define _MSP_CIC_INT_H + +/* + * The PMC-Sierra CIC interrupts are all centrally managed by the + * CIC sub-system. + * We attempt to keep the interrupt numbers as consistent as possible + * across all of the MSP devices, but some differences will creep in ... + * The interrupts which are directly forwarded to the MIPS core interrupts + * are assigned interrupts in the range 0-7, interrupts cascaded through + * the CIC are assigned interrupts 8-39. The cascade occurs on C_IRQ4 + * (MSP_INT_CIC). Currently we don't really distinguish between VPE1 + * and VPE0 (or thread contexts for that matter). Will have to fix. + * The PER interrupts are assigned interrupts in the range 40-71. +*/ + + +/* + * IRQs directly forwarded to the CPU + */ +#define MSP_MIPS_INTBASE 0 +#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ +#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ +#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ +#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ +#define MSP_INT_USB 4 /* IRQ for USB, C_IRQ2 */ +#define MSP_INT_SAR 5 /* IRQ for ADSL2+ SAR, C_IRQ3 */ +#define MSP_INT_CIC 6 /* IRQ for CIC block, C_IRQ4 */ +#define MSP_INT_SEC 7 /* IRQ for Sec engine, C_IRQ5 */ + +/* + * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4) + * These defines should be tied to the register definitions for the CIC + * interrupt routine. For now, just use hard-coded values. + */ +#define MSP_CIC_INTBASE (MSP_MIPS_INTBASE + 8) +#define MSP_INT_EXT0 (MSP_CIC_INTBASE + 0) + /* External interrupt 0 */ +#define MSP_INT_EXT1 (MSP_CIC_INTBASE + 1) + /* External interrupt 1 */ +#define MSP_INT_EXT2 (MSP_CIC_INTBASE + 2) + /* External interrupt 2 */ +#define MSP_INT_EXT3 (MSP_CIC_INTBASE + 3) + /* External interrupt 3 */ +#define MSP_INT_CPUIF (MSP_CIC_INTBASE + 4) + /* CPU interface interrupt */ +#define MSP_INT_EXT4 (MSP_CIC_INTBASE + 5) + /* External interrupt 4 */ +#define MSP_INT_CIC_USB (MSP_CIC_INTBASE + 6) + /* Cascaded IRQ for USB */ +#define MSP_INT_MBOX (MSP_CIC_INTBASE + 7) + /* Sec engine mailbox IRQ */ +#define MSP_INT_EXT5 (MSP_CIC_INTBASE + 8) + /* External interrupt 5 */ +#define MSP_INT_TDM (MSP_CIC_INTBASE + 9) + /* TDM interrupt */ +#define MSP_INT_CIC_MAC0 (MSP_CIC_INTBASE + 10) + /* Cascaded IRQ for MAC 0 */ +#define MSP_INT_CIC_MAC1 (MSP_CIC_INTBASE + 11) + /* Cascaded IRQ for MAC 1 */ +#define MSP_INT_CIC_SEC (MSP_CIC_INTBASE + 12) + /* Cascaded IRQ for sec engine */ +#define MSP_INT_PER (MSP_CIC_INTBASE + 13) + /* Peripheral interrupt */ +#define MSP_INT_TIMER0 (MSP_CIC_INTBASE + 14) + /* SLP timer 0 */ +#define MSP_INT_TIMER1 (MSP_CIC_INTBASE + 15) + /* SLP timer 1 */ +#define MSP_INT_TIMER2 (MSP_CIC_INTBASE + 16) + /* SLP timer 2 */ +#define MSP_INT_VPE0_TIMER (MSP_CIC_INTBASE + 17) + /* VPE0 MIPS timer */ +#define MSP_INT_BLKCP (MSP_CIC_INTBASE + 18) + /* Block Copy */ +#define MSP_INT_UART0 (MSP_CIC_INTBASE + 19) + /* UART 0 */ +#define MSP_INT_PCI (MSP_CIC_INTBASE + 20) + /* PCI subsystem */ +#define MSP_INT_EXT6 (MSP_CIC_INTBASE + 21) + /* External interrupt 5 */ +#define MSP_INT_PCI_MSI (MSP_CIC_INTBASE + 22) + /* PCI Message Signal */ +#define MSP_INT_CIC_SAR (MSP_CIC_INTBASE + 23) + /* Cascaded ADSL2+ SAR IRQ */ +#define MSP_INT_DSL (MSP_CIC_INTBASE + 24) + /* ADSL2+ IRQ */ +#define MSP_INT_CIC_ERR (MSP_CIC_INTBASE + 25) + /* SLP error condition */ +#define MSP_INT_VPE1_TIMER (MSP_CIC_INTBASE + 26) + /* VPE1 MIPS timer */ +#define MSP_INT_VPE0_PC (MSP_CIC_INTBASE + 27) + /* VPE0 Performance counter */ +#define MSP_INT_VPE1_PC (MSP_CIC_INTBASE + 28) + /* VPE1 Performance counter */ +#define MSP_INT_EXT7 (MSP_CIC_INTBASE + 29) + /* External interrupt 5 */ +#define MSP_INT_VPE0_SW (MSP_CIC_INTBASE + 30) + /* VPE0 Software interrupt */ +#define MSP_INT_VPE1_SW (MSP_CIC_INTBASE + 31) + /* VPE0 Software interrupt */ + +/* + * IRQs cascaded on CIC PER interrupt (MSP_INT_PER) + */ +#define MSP_PER_INTBASE (MSP_CIC_INTBASE + 32) +/* Reserved 0-1 */ +#define MSP_INT_UART1 (MSP_PER_INTBASE + 2) + /* UART 1 */ +/* Reserved 3-5 */ +#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) + /* 2-wire */ +#define MSP_INT_TM0 (MSP_PER_INTBASE + 7) + /* Peripheral timer block out 0 */ +#define MSP_INT_TM1 (MSP_PER_INTBASE + 8) + /* Peripheral timer block out 1 */ +/* Reserved 9 */ +#define MSP_INT_SPRX (MSP_PER_INTBASE + 10) + /* SPI RX complete */ +#define MSP_INT_SPTX (MSP_PER_INTBASE + 11) + /* SPI TX complete */ +#define MSP_INT_GPIO (MSP_PER_INTBASE + 12) + /* GPIO */ +#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) + /* Peripheral error */ +/* Reserved 14-31 */ + +#endif /* !_MSP_CIC_INT_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h new file mode 100644 index 000000000000..1d9f05474820 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h @@ -0,0 +1,43 @@ +/* + * Defines for the MSP interrupt handlers. + * + * Copyright (C) 2005, PMC-Sierra, Inc. All rights reserved. + * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#ifndef _MSP_INT_H +#define _MSP_INT_H + +/* + * The PMC-Sierra MSP product line has at least two different interrupt + * controllers, the SLP register based scheme and the CIC interrupt + * controller block mechanism. This file distinguishes between them + * so that devices see a uniform interface. + */ + +#if defined(CONFIG_IRQ_MSP_SLP) + #include "msp_slp_int.h" +#elif defined(CONFIG_IRQ_MSP_CIC) + #include "msp_cic_int.h" +#else + #error "What sort of interrupt controller does *your* MSP have?" +#endif + +#endif /* !_MSP_INT_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h new file mode 100644 index 000000000000..415606903617 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h @@ -0,0 +1,205 @@ +/* + * Copyright (c) 2000-2006 PMC-Sierra INC. + * + * This program is free software; you can redistribute it + * and/or modify it under the terms of the GNU General + * Public License as published by the Free Software + * Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA + * 02139, USA. + * + * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND + * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS + * SOFTWARE. + */ + +#ifndef _MSP_PCI_H_ +#define _MSP_PCI_H_ + +#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220)) + +/* + * It is convenient to program the OATRAN register so that + * Athena virtual address space and PCI address space are + * the same. This is not a requirement, just a convenience. + * + * The only hard restrictions on the value of OATRAN is that + * OATRAN must not be programmed to allow translated memory + * addresses to fall within the lowest 512MB of + * PCI address space. This region is hardcoded + * for use as Athena PCI Host Controller target + * access memory space to the Athena's SDRAM. + * + * Note that OATRAN applies only to memory accesses, not + * to I/O accesses. + * + * To program OATRAN to make Athena virtual address space + * and PCI address space have the same values, OATRAN + * is to be programmed to 0xB8000000. The top seven + * bits of the value mimic the seven bits clipped off + * by the PCI Host controller. + * + * With OATRAN at the said value, when the CPU does + * an access to its virtual address at, say 0xB900_5000, + * the address appearing on the PCI bus will be + * 0xB900_5000. + * - Michael Penner + */ +#define MSP_PCI_OATRAN 0xB8000000UL + +#define MSP_PCI_SPACE_BASE (MSP_PCI_OATRAN + 0x1002000UL) +#define MSP_PCI_SPACE_SIZE (0x3000000UL - 0x2000) +#define MSP_PCI_SPACE_END \ + (MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1) +#define MSP_PCI_IOSPACE_BASE (MSP_PCI_OATRAN + 0x1001000UL) +#define MSP_PCI_IOSPACE_SIZE 0x1000 +#define MSP_PCI_IOSPACE_END \ + (MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1) + +/* IRQ for PCI status interrupts */ +#define PCI_STAT_IRQ 20 + +#define QFLUSH_REG_1 0xB7F40000 + +typedef volatile unsigned int pcireg; +typedef void * volatile ppcireg; + +struct pci_block_copy +{ + pcireg unused1; /* +0x00 */ + pcireg unused2; /* +0x04 */ + ppcireg unused3; /* +0x08 */ + ppcireg unused4; /* +0x0C */ + pcireg unused5; /* +0x10 */ + pcireg unused6; /* +0x14 */ + pcireg unused7; /* +0x18 */ + ppcireg unused8; /* +0x1C */ + ppcireg unused9; /* +0x20 */ + pcireg unusedA; /* +0x24 */ + ppcireg unusedB; /* +0x28 */ + ppcireg unusedC; /* +0x2C */ +}; + +enum +{ + config_device_vendor, /* 0 */ + config_status_command, /* 1 */ + config_class_revision, /* 2 */ + config_BIST_header_latency_cache, /* 3 */ + config_BAR0, /* 4 */ + config_BAR1, /* 5 */ + config_BAR2, /* 6 */ + config_not_used7, /* 7 */ + config_not_used8, /* 8 */ + config_not_used9, /* 9 */ + config_CIS, /* 10 */ + config_subsystem, /* 11 */ + config_not_used12, /* 12 */ + config_capabilities, /* 13 */ + config_not_used14, /* 14 */ + config_lat_grant_irq, /* 15 */ + config_message_control,/* 16 */ + config_message_addr, /* 17 */ + config_message_data, /* 18 */ + config_VPD_addr, /* 19 */ + config_VPD_data, /* 20 */ + config_maxregs /* 21 - number of registers */ +}; + +struct msp_pci_regs +{ + pcireg hop_unused_00; /* +0x00 */ + pcireg hop_unused_04; /* +0x04 */ + pcireg hop_unused_08; /* +0x08 */ + pcireg hop_unused_0C; /* +0x0C */ + pcireg hop_unused_10; /* +0x10 */ + pcireg hop_unused_14; /* +0x14 */ + pcireg hop_unused_18; /* +0x18 */ + pcireg hop_unused_1C; /* +0x1C */ + pcireg hop_unused_20; /* +0x20 */ + pcireg hop_unused_24; /* +0x24 */ + pcireg hop_unused_28; /* +0x28 */ + pcireg hop_unused_2C; /* +0x2C */ + pcireg hop_unused_30; /* +0x30 */ + pcireg hop_unused_34; /* +0x34 */ + pcireg if_control; /* +0x38 */ + pcireg oatran; /* +0x3C */ + pcireg reset_ctl; /* +0x40 */ + pcireg config_addr; /* +0x44 */ + pcireg hop_unused_48; /* +0x48 */ + pcireg msg_signaled_int_status; /* +0x4C */ + pcireg msg_signaled_int_mask; /* +0x50 */ + pcireg if_status; /* +0x54 */ + pcireg if_mask; /* +0x58 */ + pcireg hop_unused_5C; /* +0x5C */ + pcireg hop_unused_60; /* +0x60 */ + pcireg hop_unused_64; /* +0x64 */ + pcireg hop_unused_68; /* +0x68 */ + pcireg hop_unused_6C; /* +0x6C */ + pcireg hop_unused_70; /* +0x70 */ + + struct pci_block_copy pci_bc[2] __attribute__((aligned(64))); + + pcireg error_hdr1; /* +0xE0 */ + pcireg error_hdr2; /* +0xE4 */ + + pcireg config[config_maxregs] __attribute__((aligned(256))); + +}; + +#define BPCI_CFGADDR_BUSNUM_SHF 16 +#define BPCI_CFGADDR_FUNCTNUM_SHF 8 +#define BPCI_CFGADDR_REGNUM_SHF 2 +#define BPCI_CFGADDR_ENABLE (1<<31) + +#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */ +#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */ +#define BPCI_IFCONTROL_CTO_SHF 12 /* Shift count for CTO bits */ +#define BPCI_IFCONTROL_SE (1<<5) /* Enable exceptions on errors */ +#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */ +#define BPCI_IFCONTROL_CAP (1<<3) /* Enable capabilities */ +#define BPCI_IFCONTROL_MMC_SHF 0 /* Shift count for MMC bits */ + +#define BPCI_IFSTATUS_MGT (1<<8) /* Master Grant timeout */ +#define BPCI_IFSTATUS_MTT (1<<9) /* Master TRDY timeout */ +#define BPCI_IFSTATUS_MRT (1<<10) /* Master retry timeout */ +#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */ +#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */ +#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */ +#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */ +#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */ +#define BPCI_IFSTATUS_RTO (1<<18) /* Retry time out */ +#define BPCI_IFSTATUS_SER (1<<19) /* System error */ +#define BPCI_IFSTATUS_PER (1<<20) /* Parity error */ +#define BPCI_IFSTATUS_LCA (1<<21) /* Local CPU abort */ +#define BPCI_IFSTATUS_MEM (1<<22) /* Memory prot. violation */ +#define BPCI_IFSTATUS_ARB (1<<23) /* Arbiter timed out */ +#define BPCI_IFSTATUS_STA (1<<27) /* Signaled target abort */ +#define BPCI_IFSTATUS_TA (1<<28) /* Target abort */ +#define BPCI_IFSTATUS_MA (1<<29) /* Master abort */ +#define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */ +#define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */ + +#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */ +#define BPCI_RESETCTL_RT (1<<4) /* Release time */ +#define BPCI_RESETCTL_CT (1<<8) /* Config time */ +#define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */ +#define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */ +#define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */ + +extern struct msp_pci_regs msp_pci_regs + __attribute__((section(".register"))); +extern unsigned long msp_pci_config_space + __attribute__((section(".register"))); + +#endif /* !_MSP_PCI_H_ */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h new file mode 100644 index 000000000000..14ca7dc382a8 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h @@ -0,0 +1,176 @@ +/* + * MIPS boards bootprom interface for the Linux kernel. + * + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Author: Carsten Langgaard, carstenl@mips.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#ifndef _ASM_MSP_PROM_H +#define _ASM_MSP_PROM_H + +#include <linux/types.h> + +#define DEVICEID "deviceid" +#define FEATURES "features" +#define PROM_ENV "prom_env" +#define PROM_ENV_FILE "/proc/"PROM_ENV +#define PROM_ENV_SIZE 256 + +#define CPU_DEVID_FAMILY 0x0000ff00 +#define CPU_DEVID_REVISION 0x000000ff + +#define FPGA_IS_POLO(revision) \ + (((revision >= 0xb0) && (revision < 0xd0))) +#define FPGA_IS_5000(revision) \ + ((revision >= 0x80) && (revision <= 0x90)) +#define FPGA_IS_ZEUS(revision) ((revision < 0x7f)) +#define FPGA_IS_DUET(revision) \ + (((revision >= 0xa0) && (revision < 0xb0))) +#define FPGA_IS_MSP4200(revision) ((revision >= 0xd0)) +#define FPGA_IS_MSP7100(revision) ((revision >= 0xd0)) + +#define MACHINE_TYPE_POLO "POLO" +#define MACHINE_TYPE_DUET "DUET" +#define MACHINE_TYPE_ZEUS "ZEUS" +#define MACHINE_TYPE_MSP2000REVB "MSP2000REVB" +#define MACHINE_TYPE_MSP5000 "MSP5000" +#define MACHINE_TYPE_MSP4200 "MSP4200" +#define MACHINE_TYPE_MSP7120 "MSP7120" +#define MACHINE_TYPE_MSP7130 "MSP7130" +#define MACHINE_TYPE_OTHER "OTHER" + +#define MACHINE_TYPE_POLO_FPGA "POLO-FPGA" +#define MACHINE_TYPE_DUET_FPGA "DUET-FPGA" +#define MACHINE_TYPE_ZEUS_FPGA "ZEUS_FPGA" +#define MACHINE_TYPE_MSP2000REVB_FPGA "MSP2000REVB-FPGA" +#define MACHINE_TYPE_MSP5000_FPGA "MSP5000-FPGA" +#define MACHINE_TYPE_MSP4200_FPGA "MSP4200-FPGA" +#define MACHINE_TYPE_MSP7100_FPGA "MSP7100-FPGA" +#define MACHINE_TYPE_OTHER_FPGA "OTHER-FPGA" + +/* Device Family definitions */ +#define FAMILY_FPGA 0x0000 +#define FAMILY_ZEUS 0x1000 +#define FAMILY_POLO 0x2000 +#define FAMILY_DUET 0x4000 +#define FAMILY_TRIAD 0x5000 +#define FAMILY_MSP4200 0x4200 +#define FAMILY_MSP4200_FPGA 0x4f00 +#define FAMILY_MSP7100 0x7100 +#define FAMILY_MSP7100_FPGA 0x7f00 + +/* Device Type definitions */ +#define TYPE_MSP7120 0x7120 +#define TYPE_MSP7130 0x7130 + +#define ENET_KEY 'E' +#define ENETTXD_KEY 'e' +#define PCI_KEY 'P' +#define PCIMUX_KEY 'p' +#define SEC_KEY 'S' +#define SPAD_KEY 'D' +#define TDM_KEY 'T' +#define ZSP_KEY 'Z' + +#define FEATURE_NOEXIST '-' +#define FEATURE_EXIST '+' + +#define ENET_MII 'M' +#define ENET_RMII 'R' + +#define ENETTXD_FALLING 'F' +#define ENETTXD_RISING 'R' + +#define PCI_HOST 'H' +#define PCI_PERIPHERAL 'P' + +#define PCIMUX_FULL 'F' +#define PCIMUX_SINGLE 'S' + +#define SEC_DUET 'D' +#define SEC_POLO 'P' +#define SEC_SLOW 'S' +#define SEC_TRIAD 'T' + +#define SPAD_POLO 'P' + +#define TDM_DUET 'D' /* DUET TDMs might exist */ +#define TDM_POLO 'P' /* POLO TDMs might exist */ +#define TDM_TRIAD 'T' /* TRIAD TDMs might exist */ + +#define ZSP_DUET 'D' /* one DUET zsp engine */ +#define ZSP_TRIAD 'T' /* two TRIAD zsp engines */ + +extern char *prom_getcmdline(void); +extern char *prom_getenv(char *name); +extern void prom_init_cmdline(void); +extern void prom_meminit(void); +extern void prom_fixup_mem_map(unsigned long start_mem, + unsigned long end_mem); + +#ifdef CONFIG_MTD_PMC_MSP_RAMROOT +extern bool get_ramroot(void **start, unsigned long *size); +#endif + +extern int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr); +extern unsigned long get_deviceid(void); +extern char identify_enet(unsigned long interface_num); +extern char identify_enetTxD(unsigned long interface_num); +extern char identify_pci(void); +extern char identify_sec(void); +extern char identify_spad(void); +extern char identify_sec(void); +extern char identify_tdm(void); +extern char identify_zsp(void); +extern unsigned long identify_family(void); +extern unsigned long identify_revision(void); + +/* + * The following macro calls prom_printf and puts the format string + * into an init section so it can be reclaimed. + */ +#define ppfinit(f, x...) \ + do { \ + static char _f[] __initdata = KERN_INFO f; \ + printk(_f, ## x); \ + } while (0) + +/* Memory descriptor management. */ +#define PROM_MAX_PMEMBLOCKS 7 /* 6 used */ + +enum yamon_memtypes { + yamon_dontuse, + yamon_prom, + yamon_free, +}; + +struct prom_pmemblock { + unsigned long base; /* Within KSEG0. */ + unsigned int size; /* In bytes. */ + unsigned int type; /* free or prom memory */ +}; + +extern int prom_argc; +extern char **prom_argv; +extern char **prom_envp; +extern int *prom_vec; +extern struct prom_pmemblock *prom_getmdesc(void); + +#endif /* !_ASM_MSP_PROM_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h new file mode 100644 index 000000000000..60a5a38dd5b2 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h @@ -0,0 +1,236 @@ +/* + * SMP/VPE-safe functions to access "registers" (see note). + * + * NOTES: +* - These macros use ll/sc instructions, so it is your responsibility to + * ensure these are available on your platform before including this file. + * - The MIPS32 spec states that ll/sc results are undefined for uncached + * accesses. This means they can't be used on HW registers accessed + * through kseg1. Code which requires these macros for this purpose must + * front-end the registers with cached memory "registers" and have a single + * thread update the actual HW registers. + * - A maximum of 2k of code can be inserted between ll and sc. Every + * memory accesses between the instructions will increase the chance of + * sc failing and having to loop. + * - When using custom_read_reg32/custom_write_reg32 only perform the + * necessary logical operations on the register value in between these + * two calls. All other logic should be performed before the first call. + * - There is a bug on the R10000 chips which has a workaround. If you + * are affected by this bug, make sure to define the symbol 'R10000_LLSC_WAR' + * to be non-zero. If you are using this header from within linux, you may + * include <asm/war.h> before including this file to have this defined + * appropriately for you. + * + * Copyright 2005-2007 PMC-Sierra, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO + * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., 675 + * Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_REGOPS_H__ +#define __ASM_REGOPS_H__ + +#include <linux/types.h> + +#include <asm/war.h> + +#ifndef R10000_LLSC_WAR +#define R10000_LLSC_WAR 0 +#endif + +#if R10000_LLSC_WAR == 1 +#define __beqz "beqzl " +#else +#define __beqz "beqz " +#endif + +#ifndef _LINUX_TYPES_H +typedef unsigned int u32; +#endif + +/* + * Sets all the masked bits to the corresponding value bits + */ +static inline void set_value_reg32(volatile u32 *const addr, + u32 const mask, + u32 const value) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set mips3 \n" + "1: ll %0, %1 # set_value_reg32 \n" + " and %0, %2 \n" + " or %0, %3 \n" + " sc %0, %1 \n" + " "__beqz"%0, 1b \n" + " nop \n" + " .set pop \n" + : "=&r" (temp), "=m" (*addr) + : "ir" (~mask), "ir" (value), "m" (*addr)); +} + +/* + * Sets all the masked bits to '1' + */ +static inline void set_reg32(volatile u32 *const addr, + u32 const mask) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set mips3 \n" + "1: ll %0, %1 # set_reg32 \n" + " or %0, %2 \n" + " sc %0, %1 \n" + " "__beqz"%0, 1b \n" + " nop \n" + " .set pop \n" + : "=&r" (temp), "=m" (*addr) + : "ir" (mask), "m" (*addr)); +} + +/* + * Sets all the masked bits to '0' + */ +static inline void clear_reg32(volatile u32 *const addr, + u32 const mask) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set mips3 \n" + "1: ll %0, %1 # clear_reg32 \n" + " and %0, %2 \n" + " sc %0, %1 \n" + " "__beqz"%0, 1b \n" + " nop \n" + " .set pop \n" + : "=&r" (temp), "=m" (*addr) + : "ir" (~mask), "m" (*addr)); +} + +/* + * Toggles all masked bits from '0' to '1' and '1' to '0' + */ +static inline void toggle_reg32(volatile u32 *const addr, + u32 const mask) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set mips3 \n" + "1: ll %0, %1 # toggle_reg32 \n" + " xor %0, %2 \n" + " sc %0, %1 \n" + " "__beqz"%0, 1b \n" + " nop \n" + " .set pop \n" + : "=&r" (temp), "=m" (*addr) + : "ir" (mask), "m" (*addr)); +} + +/* + * Read all masked bits others are returned as '0' + */ +static inline u32 read_reg32(volatile u32 *const addr, + u32 const mask) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " lw %0, %1 # read \n" + " and %0, %2 # mask \n" + " .set pop \n" + : "=&r" (temp) + : "m" (*addr), "ir" (mask)); + + return temp; +} + +/* + * blocking_read_reg32 - Read address with blocking load + * + * Uncached writes need to be read back to ensure they reach RAM. + * The returned value must be 'used' to prevent from becoming a + * non-blocking load. + */ +static inline u32 blocking_read_reg32(volatile u32 *const addr) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " lw %0, %1 # read \n" + " move %0, %0 # block \n" + " .set pop \n" + : "=&r" (temp) + : "m" (*addr)); + + return temp; +} + +/* + * For special strange cases only: + * + * If you need custom processing within a ll/sc loop, use the following macros + * VERY CAREFULLY: + * + * u32 tmp; <-- Define a variable to hold the data + * + * custom_read_reg32(address, tmp); <-- Reads the address and put the value + * in the 'tmp' variable given + * + * From here on out, you are (basicly) atomic, so don't do anything too + * fancy! + * Also, this code may loop if the end of this block fails to write + * everything back safely due do the other CPU, so do NOT do anything + * with side-effects! + * + * custom_write_reg32(address, tmp); <-- Writes back 'tmp' safely. + */ +#define custom_read_reg32(address, tmp) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set mips3 \n" \ + "1: ll %0, %1 #custom_read_reg32 \n" \ + " .set pop \n" \ + : "=r" (tmp), "=m" (*address) \ + : "m" (*address)) + +#define custom_write_reg32(address, tmp) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set mips3 \n" \ + " sc %0, %1 #custom_write_reg32 \n" \ + " "__beqz"%0, 1b \n" \ + " nop \n" \ + " .set pop \n" \ + : "=&r" (tmp), "=m" (*address) \ + : "0" (tmp), "m" (*address)) + +#endif /* __ASM_REGOPS_H__ */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h new file mode 100644 index 000000000000..603eb737b4a8 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h @@ -0,0 +1,663 @@ +/* + * Defines for the address space, registers and register configuration + * (bit masks, access macros etc) for the PMC-Sierra line of MSP products. + * This file contains addess maps for all the devices in the line of + * products but only has register definitions and configuration masks for + * registers which aren't definitely associated with any device. Things + * like clock settings, reset access, the ELB etc. Individual device + * drivers will reference the appropriate XXX_BASE value defined here + * and have individual registers offset from that. + * + * Copyright (C) 2005-2007 PMC-Sierra, Inc. All rights reserved. + * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#include <asm/addrspace.h> +#include <linux/types.h> + +#ifndef _ASM_MSP_REGS_H +#define _ASM_MSP_REGS_H + +/* + ######################################################################## + # Address space and device base definitions # + ######################################################################## + */ + +/* + *************************************************************************** + * System Logic and Peripherals (ELB, UART0, etc) device address space * + *************************************************************************** + */ +#define MSP_SLP_BASE 0x1c000000 + /* System Logic and Peripherals */ +#define MSP_RST_BASE (MSP_SLP_BASE + 0x10) + /* System reset register base */ +#define MSP_RST_SIZE 0x0C /* System reset register space */ + +#define MSP_WTIMER_BASE (MSP_SLP_BASE + 0x04C) + /* watchdog timer base */ +#define MSP_ITIMER_BASE (MSP_SLP_BASE + 0x054) + /* internal timer base */ +#define MSP_UART0_BASE (MSP_SLP_BASE + 0x100) + /* UART0 controller base */ +#define MSP_BCPY_CTRL_BASE (MSP_SLP_BASE + 0x120) + /* Block Copy controller base */ +#define MSP_BCPY_DESC_BASE (MSP_SLP_BASE + 0x160) + /* Block Copy descriptor base */ + +/* + *************************************************************************** + * PCI address space * + *************************************************************************** + */ +#define MSP_PCI_BASE 0x19000000 + +/* + *************************************************************************** + * MSbus device address space * + *************************************************************************** + */ +#define MSP_MSB_BASE 0x18000000 + /* MSbus address start */ +#define MSP_PER_BASE (MSP_MSB_BASE + 0x400000) + /* Peripheral device registers */ +#define MSP_MAC0_BASE (MSP_MSB_BASE + 0x600000) + /* MAC A device registers */ +#define MSP_MAC1_BASE (MSP_MSB_BASE + 0x700000) + /* MAC B device registers */ +#define MSP_MAC_SIZE 0xE0 /* MAC register space */ + +#define MSP_SEC_BASE (MSP_MSB_BASE + 0x800000) + /* Security Engine registers */ +#define MSP_MAC2_BASE (MSP_MSB_BASE + 0x900000) + /* MAC C device registers */ +#define MSP_ADSL2_BASE (MSP_MSB_BASE + 0xA80000) + /* ADSL2 device registers */ +#define MSP_USB_BASE (MSP_MSB_BASE + 0xB40000) + /* USB device registers */ +#define MSP_USB_BASE_START (MSP_MSB_BASE + 0xB40100) + /* USB device registers */ +#define MSP_USB_BASE_END (MSP_MSB_BASE + 0xB401FF) + /* USB device registers */ +#define MSP_CPUIF_BASE (MSP_MSB_BASE + 0xC00000) + /* CPU interface registers */ + +/* Devices within the MSbus peripheral block */ +#define MSP_UART1_BASE (MSP_PER_BASE + 0x030) + /* UART1 controller base */ +#define MSP_SPI_BASE (MSP_PER_BASE + 0x058) + /* SPI/MPI control registers */ +#define MSP_TWI_BASE (MSP_PER_BASE + 0x090) + /* Two-wire control registers */ +#define MSP_PTIMER_BASE (MSP_PER_BASE + 0x0F0) + /* Programmable timer control */ + +/* + *************************************************************************** + * Physical Memory configuration address space * + *************************************************************************** + */ +#define MSP_MEM_CFG_BASE 0x17f00000 + +#define MSP_MEM_INDIRECT_CTL_10 0x10 + +/* + * Notes: + * 1) The SPI registers are split into two blocks, one offset from the + * MSP_SPI_BASE by 0x00 and the other offset from the MSP_SPI_BASE by + * 0x68. The SPI driver definitions for the register must be aware + * of this. + * 2) The block copy engine register are divided into two regions, one + * for the control/configuration of the engine proper and one for the + * values of the descriptors used in the copy process. These have + * different base defines (CTRL_BASE vs DESC_BASE) + * 3) These constants are for physical addresses which means that they + * work correctly with "ioremap" and friends. This means that device + * drivers will need to remap these addresses using ioremap and perhaps + * the readw/writew macros. Or they could use the regptr() macro + * defined below, but the readw/writew calls are the correct thing. + * 4) The UARTs have an additional status register offset from the base + * address. This register isn't used in the standard 8250 driver but + * may be used in other software. Consult the hardware datasheet for + * offset details. + * 5) For some unknown reason the security engine (MSP_SEC_BASE) registers + * start at an offset of 0x84 from the base address but the block of + * registers before this is reserved for the security engine. The + * driver will have to be aware of this but it makes the register + * definitions line up better with the documentation. + */ + +/* + ######################################################################## + # System register definitions. Not associated with a specific device # + ######################################################################## + */ + +/* + * This macro maps the physical register number into uncached space + * and (for C code) casts it into a u32 pointer so it can be dereferenced + * Normally these would be accessed with ioremap and readX/writeX, but + * these are convenient for a lot of internal kernel code. + */ +#ifdef __ASSEMBLER__ + #define regptr(addr) (KSEG1ADDR(addr)) +#else + #define regptr(addr) ((volatile u32 *const)(KSEG1ADDR(addr))) +#endif + +/* + *************************************************************************** + * System Logic and Peripherals (RESET, ELB, etc) registers * + *************************************************************************** + */ + +/* System Control register definitions */ +#define DEV_ID_REG regptr(MSP_SLP_BASE + 0x00) + /* Device-ID RO */ +#define FWR_ID_REG regptr(MSP_SLP_BASE + 0x04) + /* Firmware-ID Register RW */ +#define SYS_ID_REG0 regptr(MSP_SLP_BASE + 0x08) + /* System-ID Register-0 RW */ +#define SYS_ID_REG1 regptr(MSP_SLP_BASE + 0x0C) + /* System-ID Register-1 RW */ + +/* System Reset register definitions */ +#define RST_STS_REG regptr(MSP_SLP_BASE + 0x10) + /* System Reset Status RO */ +#define RST_SET_REG regptr(MSP_SLP_BASE + 0x14) + /* System Set Reset WO */ +#define RST_CLR_REG regptr(MSP_SLP_BASE + 0x18) + /* System Clear Reset WO */ + +/* System Clock Registers */ +#define PCI_SLP_REG regptr(MSP_SLP_BASE + 0x1C) + /* PCI clock generator RW */ +#define URT_SLP_REG regptr(MSP_SLP_BASE + 0x20) + /* UART clock generator RW */ +/* reserved (MSP_SLP_BASE + 0x24) */ +/* reserved (MSP_SLP_BASE + 0x28) */ +#define PLL1_SLP_REG regptr(MSP_SLP_BASE + 0x2C) + /* PLL1 clock generator RW */ +#define PLL0_SLP_REG regptr(MSP_SLP_BASE + 0x30) + /* PLL0 clock generator RW */ +#define MIPS_SLP_REG regptr(MSP_SLP_BASE + 0x34) + /* MIPS clock generator RW */ +#define VE_SLP_REG regptr(MSP_SLP_BASE + 0x38) + /* Voice Eng clock generator RW */ +/* reserved (MSP_SLP_BASE + 0x3C) */ +#define MSB_SLP_REG regptr(MSP_SLP_BASE + 0x40) + /* MS-Bus clock generator RW */ +#define SMAC_SLP_REG regptr(MSP_SLP_BASE + 0x44) + /* Sec & MAC clock generator RW */ +#define PERF_SLP_REG regptr(MSP_SLP_BASE + 0x48) + /* Per & TDM clock generator RW */ + +/* Interrupt Controller Registers */ +#define SLP_INT_STS_REG regptr(MSP_SLP_BASE + 0x70) + /* Interrupt status register RW */ +#define SLP_INT_MSK_REG regptr(MSP_SLP_BASE + 0x74) + /* Interrupt enable/mask RW */ +#define SE_MBOX_REG regptr(MSP_SLP_BASE + 0x78) + /* Security Engine mailbox RW */ +#define VE_MBOX_REG regptr(MSP_SLP_BASE + 0x7C) + /* Voice Engine mailbox RW */ + +/* ELB Controller Registers */ +#define CS0_CNFG_REG regptr(MSP_SLP_BASE + 0x80) + /* ELB CS0 Configuration Reg */ +#define CS0_ADDR_REG regptr(MSP_SLP_BASE + 0x84) + /* ELB CS0 Base Address Reg */ +#define CS0_MASK_REG regptr(MSP_SLP_BASE + 0x88) + /* ELB CS0 Mask Register */ +#define CS0_ACCESS_REG regptr(MSP_SLP_BASE + 0x8C) + /* ELB CS0 access register */ + +#define CS1_CNFG_REG regptr(MSP_SLP_BASE + 0x90) + /* ELB CS1 Configuration Reg */ +#define CS1_ADDR_REG regptr(MSP_SLP_BASE + 0x94) + /* ELB CS1 Base Address Reg */ +#define CS1_MASK_REG regptr(MSP_SLP_BASE + 0x98) + /* ELB CS1 Mask Register */ +#define CS1_ACCESS_REG regptr(MSP_SLP_BASE + 0x9C) + /* ELB CS1 access register */ + +#define CS2_CNFG_REG regptr(MSP_SLP_BASE + 0xA0) + /* ELB CS2 Configuration Reg */ +#define CS2_ADDR_REG regptr(MSP_SLP_BASE + 0xA4) + /* ELB CS2 Base Address Reg */ +#define CS2_MASK_REG regptr(MSP_SLP_BASE + 0xA8) + /* ELB CS2 Mask Register */ +#define CS2_ACCESS_REG regptr(MSP_SLP_BASE + 0xAC) + /* ELB CS2 access register */ + +#define CS3_CNFG_REG regptr(MSP_SLP_BASE + 0xB0) + /* ELB CS3 Configuration Reg */ +#define CS3_ADDR_REG regptr(MSP_SLP_BASE + 0xB4) + /* ELB CS3 Base Address Reg */ +#define CS3_MASK_REG regptr(MSP_SLP_BASE + 0xB8) + /* ELB CS3 Mask Register */ +#define CS3_ACCESS_REG regptr(MSP_SLP_BASE + 0xBC) + /* ELB CS3 access register */ + +#define CS4_CNFG_REG regptr(MSP_SLP_BASE + 0xC0) + /* ELB CS4 Configuration Reg */ +#define CS4_ADDR_REG regptr(MSP_SLP_BASE + 0xC4) + /* ELB CS4 Base Address Reg */ +#define CS4_MASK_REG regptr(MSP_SLP_BASE + 0xC8) + /* ELB CS4 Mask Register */ +#define CS4_ACCESS_REG regptr(MSP_SLP_BASE + 0xCC) + /* ELB CS4 access register */ + +#define CS5_CNFG_REG regptr(MSP_SLP_BASE + 0xD0) + /* ELB CS5 Configuration Reg */ +#define CS5_ADDR_REG regptr(MSP_SLP_BASE + 0xD4) + /* ELB CS5 Base Address Reg */ +#define CS5_MASK_REG regptr(MSP_SLP_BASE + 0xD8) + /* ELB CS5 Mask Register */ +#define CS5_ACCESS_REG regptr(MSP_SLP_BASE + 0xDC) + /* ELB CS5 access register */ + +/* reserved 0xE0 - 0xE8 */ +#define ELB_1PC_EN_REG regptr(MSP_SLP_BASE + 0xEC) + /* ELB single PC card detect */ + +/* reserved 0xF0 - 0xF8 */ +#define ELB_CLK_CFG_REG regptr(MSP_SLP_BASE + 0xFC) + /* SDRAM read/ELB timing Reg */ + +/* Extended UART status registers */ +#define UART0_STATUS_REG regptr(MSP_UART0_BASE + 0x0c0) + /* UART Status Register 0 */ +#define UART1_STATUS_REG regptr(MSP_UART1_BASE + 0x170) + /* UART Status Register 1 */ + +/* Performance monitoring registers */ +#define PERF_MON_CTRL_REG regptr(MSP_SLP_BASE + 0x140) + /* Performance monitor control */ +#define PERF_MON_CLR_REG regptr(MSP_SLP_BASE + 0x144) + /* Performance monitor clear */ +#define PERF_MON_CNTH_REG regptr(MSP_SLP_BASE + 0x148) + /* Perf monitor counter high */ +#define PERF_MON_CNTL_REG regptr(MSP_SLP_BASE + 0x14C) + /* Perf monitor counter low */ + +/* System control registers */ +#define SYS_CTRL_REG regptr(MSP_SLP_BASE + 0x150) + /* System control register */ +#define SYS_ERR1_REG regptr(MSP_SLP_BASE + 0x154) + /* System Error status 1 */ +#define SYS_ERR2_REG regptr(MSP_SLP_BASE + 0x158) + /* System Error status 2 */ +#define SYS_INT_CFG_REG regptr(MSP_SLP_BASE + 0x15C) + /* System Interrupt config */ + +/* Voice Engine Memory configuration */ +#define VE_MEM_REG regptr(MSP_SLP_BASE + 0x17C) + /* Voice engine memory config */ + +/* CPU/SLP Error Status registers */ +#define CPU_ERR1_REG regptr(MSP_SLP_BASE + 0x180) + /* CPU/SLP Error status 1 */ +#define CPU_ERR2_REG regptr(MSP_SLP_BASE + 0x184) + /* CPU/SLP Error status 1 */ + +#define EXTENDED_GPIO_REG regptr(MSP_SLP_BASE + 0x188) + /* Extended GPIO register */ + +/* System Error registers */ +#define SLP_ERR_STS_REG regptr(MSP_SLP_BASE + 0x190) + /* Int status for SLP errors */ +#define SLP_ERR_MSK_REG regptr(MSP_SLP_BASE + 0x194) + /* Int mask for SLP errors */ +#define SLP_ELB_ERST_REG regptr(MSP_SLP_BASE + 0x198) + /* External ELB reset */ +#define SLP_BOOT_STS_REG regptr(MSP_SLP_BASE + 0x19C) + /* Boot Status */ + +/* Extended ELB addressing */ +#define CS0_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A0) + /* CS0 Extended address */ +#define CS1_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A4) + /* CS1 Extended address */ +#define CS2_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A8) + /* CS2 Extended address */ +#define CS3_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1AC) + /* CS3 Extended address */ +/* reserved 0x1B0 */ +#define CS5_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1B4) + /* CS5 Extended address */ + +/* PLL Adjustment registers */ +#define PLL_LOCK_REG regptr(MSP_SLP_BASE + 0x200) + /* PLL0 lock status */ +#define PLL_ARST_REG regptr(MSP_SLP_BASE + 0x204) + /* PLL Analog reset status */ +#define PLL0_ADJ_REG regptr(MSP_SLP_BASE + 0x208) + /* PLL0 Adjustment value */ +#define PLL1_ADJ_REG regptr(MSP_SLP_BASE + 0x20C) + /* PLL1 Adjustment value */ + +/* + *************************************************************************** + * Peripheral Register definitions * + *************************************************************************** + */ + +/* Peripheral status */ +#define PER_CTRL_REG regptr(MSP_PER_BASE + 0x50) + /* Peripheral control register */ +#define PER_STS_REG regptr(MSP_PER_BASE + 0x54) + /* Peripheral status register */ + +/* SPI/MPI Registers */ +#define SMPI_TX_SZ_REG regptr(MSP_PER_BASE + 0x58) + /* SPI/MPI Tx Size register */ +#define SMPI_RX_SZ_REG regptr(MSP_PER_BASE + 0x5C) + /* SPI/MPI Rx Size register */ +#define SMPI_CTL_REG regptr(MSP_PER_BASE + 0x60) + /* SPI/MPI Control register */ +#define SMPI_MS_REG regptr(MSP_PER_BASE + 0x64) + /* SPI/MPI Chip Select reg */ +#define SMPI_CORE_DATA_REG regptr(MSP_PER_BASE + 0xC0) + /* SPI/MPI Core Data reg */ +#define SMPI_CORE_CTRL_REG regptr(MSP_PER_BASE + 0xC4) + /* SPI/MPI Core Control reg */ +#define SMPI_CORE_STAT_REG regptr(MSP_PER_BASE + 0xC8) + /* SPI/MPI Core Status reg */ +#define SMPI_CORE_SSEL_REG regptr(MSP_PER_BASE + 0xCC) + /* SPI/MPI Core Ssel reg */ +#define SMPI_FIFO_REG regptr(MSP_PER_BASE + 0xD0) + /* SPI/MPI Data FIFO reg */ + +/* Peripheral Block Error Registers */ +#define PER_ERR_STS_REG regptr(MSP_PER_BASE + 0x70) + /* Error Bit Status Register */ +#define PER_ERR_MSK_REG regptr(MSP_PER_BASE + 0x74) + /* Error Bit Mask Register */ +#define PER_HDR1_REG regptr(MSP_PER_BASE + 0x78) + /* Error Header 1 Register */ +#define PER_HDR2_REG regptr(MSP_PER_BASE + 0x7C) + /* Error Header 2 Register */ + +/* Peripheral Block Interrupt Registers */ +#define PER_INT_STS_REG regptr(MSP_PER_BASE + 0x80) + /* Interrupt status register */ +#define PER_INT_MSK_REG regptr(MSP_PER_BASE + 0x84) + /* Interrupt Mask Register */ +#define GPIO_INT_STS_REG regptr(MSP_PER_BASE + 0x88) + /* GPIO interrupt status reg */ +#define GPIO_INT_MSK_REG regptr(MSP_PER_BASE + 0x8C) + /* GPIO interrupt MASK Reg */ + +/* POLO GPIO registers */ +#define POLO_GPIO_DAT1_REG regptr(MSP_PER_BASE + 0x0E0) + /* Polo GPIO[8:0] data reg */ +#define POLO_GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x0E4) + /* Polo GPIO[7:0] config reg */ +#define POLO_GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x0E8) + /* Polo GPIO[15:8] config reg */ +#define POLO_GPIO_OD1_REG regptr(MSP_PER_BASE + 0x0EC) + /* Polo GPIO[31:0] output drive */ +#define POLO_GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x170) + /* Polo GPIO[23:16] config reg */ +#define POLO_GPIO_DAT2_REG regptr(MSP_PER_BASE + 0x174) + /* Polo GPIO[15:9] data reg */ +#define POLO_GPIO_DAT3_REG regptr(MSP_PER_BASE + 0x178) + /* Polo GPIO[23:16] data reg */ +#define POLO_GPIO_DAT4_REG regptr(MSP_PER_BASE + 0x17C) + /* Polo GPIO[31:24] data reg */ +#define POLO_GPIO_DAT5_REG regptr(MSP_PER_BASE + 0x180) + /* Polo GPIO[39:32] data reg */ +#define POLO_GPIO_DAT6_REG regptr(MSP_PER_BASE + 0x184) + /* Polo GPIO[47:40] data reg */ +#define POLO_GPIO_DAT7_REG regptr(MSP_PER_BASE + 0x188) + /* Polo GPIO[54:48] data reg */ +#define POLO_GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) + /* Polo GPIO[31:24] config reg */ +#define POLO_GPIO_CFG5_REG regptr(MSP_PER_BASE + 0x190) + /* Polo GPIO[39:32] config reg */ +#define POLO_GPIO_CFG6_REG regptr(MSP_PER_BASE + 0x194) + /* Polo GPIO[47:40] config reg */ +#define POLO_GPIO_CFG7_REG regptr(MSP_PER_BASE + 0x198) + /* Polo GPIO[54:48] config reg */ +#define POLO_GPIO_OD2_REG regptr(MSP_PER_BASE + 0x19C) + /* Polo GPIO[54:32] output drive */ + +/* Generic GPIO registers */ +#define GPIO_DATA1_REG regptr(MSP_PER_BASE + 0x170) + /* GPIO[1:0] data register */ +#define GPIO_DATA2_REG regptr(MSP_PER_BASE + 0x174) + /* GPIO[5:2] data register */ +#define GPIO_DATA3_REG regptr(MSP_PER_BASE + 0x178) + /* GPIO[9:6] data register */ +#define GPIO_DATA4_REG regptr(MSP_PER_BASE + 0x17C) + /* GPIO[15:10] data register */ +#define GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x180) + /* GPIO[1:0] config register */ +#define GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x184) + /* GPIO[5:2] config register */ +#define GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x188) + /* GPIO[9:6] config register */ +#define GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) + /* GPIO[15:10] config register */ +#define GPIO_OD_REG regptr(MSP_PER_BASE + 0x190) + /* GPIO[15:0] output drive */ + +/* + *************************************************************************** + * CPU Interface register definitions * + *************************************************************************** + */ +#define PCI_FLUSH_REG regptr(MSP_CPUIF_BASE + 0x00) + /* PCI-SDRAM queue flush trigger */ +#define OCP_ERR1_REG regptr(MSP_CPUIF_BASE + 0x04) + /* OCP Error Attribute 1 */ +#define OCP_ERR2_REG regptr(MSP_CPUIF_BASE + 0x08) + /* OCP Error Attribute 2 */ +#define OCP_STS_REG regptr(MSP_CPUIF_BASE + 0x0C) + /* OCP Error Status */ +#define CPUIF_PM_REG regptr(MSP_CPUIF_BASE + 0x10) + /* CPU policy configuration */ +#define CPUIF_CFG_REG regptr(MSP_CPUIF_BASE + 0x10) + /* Misc configuration options */ + +/* Central Interrupt Controller Registers */ +#define MSP_CIC_BASE (MSP_CPUIF_BASE + 0x8000) + /* Central Interrupt registers */ +#define CIC_EXT_CFG_REG regptr(MSP_CIC_BASE + 0x00) + /* External interrupt config */ +#define CIC_STS_REG regptr(MSP_CIC_BASE + 0x04) + /* CIC Interrupt Status */ +#define CIC_VPE0_MSK_REG regptr(MSP_CIC_BASE + 0x08) + /* VPE0 Interrupt Mask */ +#define CIC_VPE1_MSK_REG regptr(MSP_CIC_BASE + 0x0C) + /* VPE1 Interrupt Mask */ +#define CIC_TC0_MSK_REG regptr(MSP_CIC_BASE + 0x10) + /* Thread Context 0 Int Mask */ +#define CIC_TC1_MSK_REG regptr(MSP_CIC_BASE + 0x14) + /* Thread Context 1 Int Mask */ +#define CIC_TC2_MSK_REG regptr(MSP_CIC_BASE + 0x18) + /* Thread Context 2 Int Mask */ +#define CIC_TC3_MSK_REG regptr(MSP_CIC_BASE + 0x18) + /* Thread Context 3 Int Mask */ +#define CIC_TC4_MSK_REG regptr(MSP_CIC_BASE + 0x18) + /* Thread Context 4 Int Mask */ +#define CIC_PCIMSI_STS_REG regptr(MSP_CIC_BASE + 0x18) +#define CIC_PCIMSI_MSK_REG regptr(MSP_CIC_BASE + 0x18) +#define CIC_PCIFLSH_REG regptr(MSP_CIC_BASE + 0x18) +#define CIC_VPE0_SWINT_REG regptr(MSP_CIC_BASE + 0x08) + + +/* + *************************************************************************** + * Memory controller registers * + *************************************************************************** + */ +#define MEM_CFG1_REG regptr(MSP_MEM_CFG_BASE + 0x00) +#define MEM_SS_ADDR regptr(MSP_MEM_CFG_BASE + 0x00) +#define MEM_SS_DATA regptr(MSP_MEM_CFG_BASE + 0x04) +#define MEM_SS_WRITE regptr(MSP_MEM_CFG_BASE + 0x08) + +/* + *************************************************************************** + * PCI controller registers * + *************************************************************************** + */ +#define PCI_BASE_REG regptr(MSP_PCI_BASE + 0x00) +#define PCI_CONFIG_SPACE_REG regptr(MSP_PCI_BASE + 0x800) +#define PCI_JTAG_DEVID_REG regptr(MSP_SLP_BASE + 0x13c) + +/* + ######################################################################## + # Register content & macro definitions # + ######################################################################## + */ + +/* + *************************************************************************** + * DEV_ID defines * + *************************************************************************** + */ +#define DEV_ID_PCI_DIS (1 << 26) /* Set if PCI disabled */ +#define DEV_ID_PCI_HOST (1 << 20) /* Set if PCI host */ +#define DEV_ID_SINGLE_PC (1 << 19) /* Set if single PC Card */ +#define DEV_ID_FAMILY (0xff << 8) /* family ID code */ +#define POLO_ZEUS_SUB_FAMILY (0x7 << 16) /* sub family for Polo/Zeus */ + +#define MSPFPGA_ID (0x00 << 8) /* you are on your own here */ +#define MSP5000_ID (0x50 << 8) +#define MSP4F00_ID (0x4f << 8) /* FPGA version of MSP4200 */ +#define MSP4E00_ID (0x4f << 8) /* FPGA version of MSP7120 */ +#define MSP4200_ID (0x42 << 8) +#define MSP4000_ID (0x40 << 8) +#define MSP2XXX_ID (0x20 << 8) +#define MSPZEUS_ID (0x10 << 8) + +#define MSP2004_SUB_ID (0x0 << 16) +#define MSP2005_SUB_ID (0x1 << 16) +#define MSP2006_SUB_ID (0x1 << 16) +#define MSP2007_SUB_ID (0x2 << 16) +#define MSP2010_SUB_ID (0x3 << 16) +#define MSP2015_SUB_ID (0x4 << 16) +#define MSP2020_SUB_ID (0x5 << 16) +#define MSP2100_SUB_ID (0x6 << 16) + +/* + *************************************************************************** + * RESET defines * + *************************************************************************** + */ +#define MSP_GR_RST (0x01 << 0) /* Global reset bit */ +#define MSP_MR_RST (0x01 << 1) /* MIPS reset bit */ +#define MSP_PD_RST (0x01 << 2) /* PVC DMA reset bit */ +#define MSP_PP_RST (0x01 << 3) /* PVC reset bit */ +/* reserved */ +#define MSP_EA_RST (0x01 << 6) /* Mac A reset bit */ +#define MSP_EB_RST (0x01 << 7) /* Mac B reset bit */ +#define MSP_SE_RST (0x01 << 8) /* Security Eng reset bit */ +#define MSP_PB_RST (0x01 << 9) /* Per block reset bit */ +#define MSP_EC_RST (0x01 << 10) /* Mac C reset bit */ +#define MSP_TW_RST (0x01 << 11) /* TWI reset bit */ +#define MSP_SPI_RST (0x01 << 12) /* SPI/MPI reset bit */ +#define MSP_U1_RST (0x01 << 13) /* UART1 reset bit */ +#define MSP_U0_RST (0x01 << 14) /* UART0 reset bit */ + +/* + *************************************************************************** + * UART defines * + *************************************************************************** + */ +#define MSP_BASE_BAUD 25000000 +#define MSP_UART_REG_LEN 0x20 + +/* + *************************************************************************** + * ELB defines * + *************************************************************************** + */ +#define PCCARD_32 0x02 /* Set if is PCCARD 32 (Cardbus) */ +#define SINGLE_PCCARD 0x01 /* Set to enable single PC card */ + +/* + *************************************************************************** + * CIC defines * + *************************************************************************** + */ + +/* CIC_EXT_CFG_REG */ +#define EXT_INT_POL(eirq) (1 << (eirq + 8)) +#define EXT_INT_EDGE(eirq) (1 << eirq) + +#define CIC_EXT_SET_TRIGGER_LEVEL(reg, eirq) (reg &= ~EXT_INT_EDGE(eirq)) +#define CIC_EXT_SET_TRIGGER_EDGE(reg, eirq) (reg |= EXT_INT_EDGE(eirq)) +#define CIC_EXT_SET_ACTIVE_HI(reg, eirq) (reg |= EXT_INT_POL(eirq)) +#define CIC_EXT_SET_ACTIVE_LO(reg, eirq) (reg &= ~EXT_INT_POL(eirq)) +#define CIC_EXT_SET_ACTIVE_RISING CIC_EXT_SET_ACTIVE_HI +#define CIC_EXT_SET_ACTIVE_FALLING CIC_EXT_SET_ACTIVE_LO + +#define CIC_EXT_IS_TRIGGER_LEVEL(reg, eirq) \ + ((reg & EXT_INT_EDGE(eirq)) == 0) +#define CIC_EXT_IS_TRIGGER_EDGE(reg, eirq) (reg & EXT_INT_EDGE(eirq)) +#define CIC_EXT_IS_ACTIVE_HI(reg, eirq) (reg & EXT_INT_POL(eirq)) +#define CIC_EXT_IS_ACTIVE_LO(reg, eirq) \ + ((reg & EXT_INT_POL(eirq)) == 0) +#define CIC_EXT_IS_ACTIVE_RISING CIC_EXT_IS_ACTIVE_HI +#define CIC_EXT_IS_ACTIVE_FALLING CIC_EXT_IS_ACTIVE_LO + +/* + *************************************************************************** + * Memory Controller defines * + *************************************************************************** + */ + +/* Indirect memory controller registers */ +#define DDRC_CFG(n) (n) +#define DDRC_DEBUG(n) (0x04 + n) +#define DDRC_CTL(n) (0x40 + n) + +/* Macro to perform DDRC indirect write */ +#define DDRC_INDIRECT_WRITE(reg, mask, value) \ +({ \ + *MEM_SS_ADDR = (((mask) & 0xf) << 8) | ((reg) & 0xff); \ + *MEM_SS_DATA = (value); \ + *MEM_SS_WRITE = 1; \ +}) + +/* + *************************************************************************** + * SPI/MPI Mode * + *************************************************************************** + */ +#define SPI_MPI_RX_BUSY 0x00008000 /* SPI/MPI Receive Busy */ +#define SPI_MPI_FIFO_EMPTY 0x00004000 /* SPI/MPI Fifo Empty */ +#define SPI_MPI_TX_BUSY 0x00002000 /* SPI/MPI Transmit Busy */ +#define SPI_MPI_FIFO_FULL 0x00001000 /* SPI/MPU FIFO full */ + +/* + *************************************************************************** + * SPI/MPI Control Register * + *************************************************************************** + */ +#define SPI_MPI_RX_START 0x00000004 /* Start receive command */ +#define SPI_MPI_FLUSH_Q 0x00000002 /* Flush SPI/MPI Queue */ +#define SPI_MPI_TX_START 0x00000001 /* Start Transmit Command */ + +#endif /* !_ASM_MSP_REGS_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h new file mode 100644 index 000000000000..96d4c8ce8c83 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h @@ -0,0 +1,141 @@ +/* + * Defines for the MSP interrupt controller. + * + * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved. + * Author: Carsten Langgaard, carstenl@mips.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#ifndef _MSP_SLP_INT_H +#define _MSP_SLP_INT_H + +/* + * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded + * hierarchical system. The first level are the direct MIPS interrupts + * and are assigned the interrupt range 0-7. The second level is the SLM + * interrupt controller and is assigned the range 8-39. The third level + * comprises the Peripherial block, the PCI block, the PCI MSI block and + * the SLP. The PCI interrupts and the SLP errors are handled by the + * relevant subsystems so the core interrupt code needs only concern + * itself with the Peripheral block. These are assigned interrupts in + * the range 40-71. + */ + +/* + * IRQs directly connected to CPU + */ +#define MSP_MIPS_INTBASE 0 +#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ +#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ +#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ +#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ +#define MSP_INT_C_IRQ2 4 /* Wired off, C_IRQ2 */ +#define MSP_INT_VE 5 /* IRQ for Voice Engine, C_IRQ3 */ +#define MSP_INT_SLP 6 /* IRQ for SLM block, C_IRQ4 */ +#define MSP_INT_TIMER 7 /* IRQ for the MIPS timer, C_IRQ5 */ + +/* + * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4) + * These defines should be tied to the register definition for the SLM + * interrupt routine. For now, just use hard-coded values. + */ +#define MSP_SLP_INTBASE (MSP_MIPS_INTBASE + 8) +#define MSP_INT_EXT0 (MSP_SLP_INTBASE + 0) + /* External interrupt 0 */ +#define MSP_INT_EXT1 (MSP_SLP_INTBASE + 1) + /* External interrupt 1 */ +#define MSP_INT_EXT2 (MSP_SLP_INTBASE + 2) + /* External interrupt 2 */ +#define MSP_INT_EXT3 (MSP_SLP_INTBASE + 3) + /* External interrupt 3 */ +/* Reserved 4-7 */ + +/* + ************************************************************************* + * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER * + * Some MSP produces have this interrupt labelled as Voice and some are * + * SEC mbox ... * + ************************************************************************* + */ +#define MSP_INT_SLP_VE (MSP_SLP_INTBASE + 8) + /* Cascaded IRQ for Voice Engine*/ +#define MSP_INT_SLP_TDM (MSP_SLP_INTBASE + 9) + /* TDM interrupt */ +#define MSP_INT_SLP_MAC0 (MSP_SLP_INTBASE + 10) + /* Cascaded IRQ for MAC 0 */ +#define MSP_INT_SLP_MAC1 (MSP_SLP_INTBASE + 11) + /* Cascaded IRQ for MAC 1 */ +#define MSP_INT_SEC (MSP_SLP_INTBASE + 12) + /* IRQ for security engine */ +#define MSP_INT_PER (MSP_SLP_INTBASE + 13) + /* Peripheral interrupt */ +#define MSP_INT_TIMER0 (MSP_SLP_INTBASE + 14) + /* SLP timer 0 */ +#define MSP_INT_TIMER1 (MSP_SLP_INTBASE + 15) + /* SLP timer 1 */ +#define MSP_INT_TIMER2 (MSP_SLP_INTBASE + 16) + /* SLP timer 2 */ +#define MSP_INT_SLP_TIMER (MSP_SLP_INTBASE + 17) + /* Cascaded MIPS timer */ +#define MSP_INT_BLKCP (MSP_SLP_INTBASE + 18) + /* Block Copy */ +#define MSP_INT_UART0 (MSP_SLP_INTBASE + 19) + /* UART 0 */ +#define MSP_INT_PCI (MSP_SLP_INTBASE + 20) + /* PCI subsystem */ +#define MSP_INT_PCI_DBELL (MSP_SLP_INTBASE + 21) + /* PCI doorbell */ +#define MSP_INT_PCI_MSI (MSP_SLP_INTBASE + 22) + /* PCI Message Signal */ +#define MSP_INT_PCI_BC0 (MSP_SLP_INTBASE + 23) + /* PCI Block Copy 0 */ +#define MSP_INT_PCI_BC1 (MSP_SLP_INTBASE + 24) + /* PCI Block Copy 1 */ +#define MSP_INT_SLP_ERR (MSP_SLP_INTBASE + 25) + /* SLP error condition */ +#define MSP_INT_MAC2 (MSP_SLP_INTBASE + 26) + /* IRQ for MAC2 */ +/* Reserved 26-31 */ + +/* + * IRQs cascaded on SLP PER interrupt (MSP_INT_PER) + */ +#define MSP_PER_INTBASE (MSP_SLP_INTBASE + 32) +/* Reserved 0-1 */ +#define MSP_INT_UART1 (MSP_PER_INTBASE + 2) + /* UART 1 */ +/* Reserved 3-5 */ +#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) + /* 2-wire */ +#define MSP_INT_TM0 (MSP_PER_INTBASE + 7) + /* Peripheral timer block out 0 */ +#define MSP_INT_TM1 (MSP_PER_INTBASE + 8) + /* Peripheral timer block out 1 */ +/* Reserved 9 */ +#define MSP_INT_SPRX (MSP_PER_INTBASE + 10) + /* SPI RX complete */ +#define MSP_INT_SPTX (MSP_PER_INTBASE + 11) + /* SPI TX complete */ +#define MSP_INT_GPIO (MSP_PER_INTBASE + 12) + /* GPIO */ +#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) + /* Peripheral error */ +/* Reserved 14-31 */ + +#endif /* !_MSP_SLP_INT_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h new file mode 100644 index 000000000000..0bf48fc1892b --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h @@ -0,0 +1,28 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_PMC_SIERRA_WAR_H +#define __ASM_MIPS_PMC_SIERRA_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \ + defined(CONFIG_PMC_MSP7120_FPGA) +#define MIPS34K_MISSED_ITLB_WAR 1 +#endif + +#endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */ diff --git a/arch/mips/include/asm/pmon.h b/arch/mips/include/asm/pmon.h new file mode 100644 index 000000000000..6ad519189ce2 --- /dev/null +++ b/arch/mips/include/asm/pmon.h @@ -0,0 +1,46 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004 by Ralf Baechle + * + * The cpustart method is a PMC-Sierra's function to start the secondary CPU. + * Stock PMON 2000 has the smpfork, semlock and semunlock methods instead. + */ +#ifndef _ASM_PMON_H +#define _ASM_PMON_H + +struct callvectors { + int (*open) (char*, int, int); + int (*close) (int); + int (*read) (int, void*, int); + int (*write) (int, void*, int); + off_t (*lseek) (int, off_t, int); + int (*printf) (const char*, ...); + void (*cacheflush) (void); + char* (*gets) (char*); + union { + int (*smpfork) (unsigned long cp, char *sp); + int (*cpustart) (long, void (*)(void), void *, long); + } _s; + int (*semlock) (int sem); + void (*semunlock) (int sem); +}; + +extern struct callvectors *debug_vectors; + +#define pmon_open(name, flags, mode) debug_vectors->open(name, flage, mode) +#define pmon_close(fd) debug_vectors->close(fd) +#define pmon_read(fd, buf, count) debug_vectors->read(fd, buf, count) +#define pmon_write(fd, buf, count) debug_vectors->write(fd, buf, count) +#define pmon_lseek(fd, off, whence) debug_vectors->lseek(fd, off, whence) +#define pmon_printf(fmt...) debug_vectors->printf(fmt) +#define pmon_cacheflush() debug_vectors->cacheflush() +#define pmon_gets(s) debug_vectors->gets(s) +#define pmon_cpustart(n, f, sp, gp) debug_vectors->_s.cpustart(n, f, sp, gp) +#define pmon_smpfork(cp, sp) debug_vectors->_s.smpfork(cp, sp) +#define pmon_semlock(sem) debug_vectors->semlock(sem) +#define pmon_semunlock(sem) debug_vectors->semunlock(sem) + +#endif /* _ASM_PMON_H */ diff --git a/arch/mips/include/asm/poll.h b/arch/mips/include/asm/poll.h new file mode 100644 index 000000000000..47b952080431 --- /dev/null +++ b/arch/mips/include/asm/poll.h @@ -0,0 +1,9 @@ +#ifndef __ASM_POLL_H +#define __ASM_POLL_H + +#define POLLWRNORM POLLOUT +#define POLLWRBAND 0x0100 + +#include <asm-generic/poll.h> + +#endif /* __ASM_POLL_H */ diff --git a/arch/mips/include/asm/posix_types.h b/arch/mips/include/asm/posix_types.h new file mode 100644 index 000000000000..c200102c8586 --- /dev/null +++ b/arch/mips/include/asm/posix_types.h @@ -0,0 +1,144 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 97, 98, 99, 2000 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_POSIX_TYPES_H +#define _ASM_POSIX_TYPES_H + +#include <asm/sgidefs.h> + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned int __kernel_mode_t; +#if (_MIPS_SZLONG == 32) +typedef unsigned long __kernel_nlink_t; +#endif +#if (_MIPS_SZLONG == 64) +typedef unsigned int __kernel_nlink_t; +#endif +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef int __kernel_ipc_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +#if (_MIPS_SZLONG == 32) +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +#endif +#if (_MIPS_SZLONG == 64) +typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; +typedef long __kernel_ptrdiff_t; +#endif +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef long __kernel_daddr_t; +typedef char * __kernel_caddr_t; + +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; +typedef __kernel_uid_t __kernel_old_uid_t; +typedef __kernel_gid_t __kernel_old_gid_t; +typedef unsigned int __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if (_MIPS_SZLONG == 32) + long val[2]; +#endif +#if (_MIPS_SZLONG == 64) + int val[2]; +#endif +} __kernel_fsid_t; + +#if defined(__KERNEL__) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) */ + +#endif /* _ASM_POSIX_TYPES_H */ diff --git a/arch/mips/include/asm/prefetch.h b/arch/mips/include/asm/prefetch.h new file mode 100644 index 000000000000..17850834ccb0 --- /dev/null +++ b/arch/mips/include/asm/prefetch.h @@ -0,0 +1,87 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 by Ralf Baechle + */ +#ifndef __ASM_PREFETCH_H +#define __ASM_PREFETCH_H + + +/* + * R5000 and RM5200 implements pref and prefx instructions but they're nops, so + * rather than wasting time we pretend these processors don't support + * prefetching at all. + * + * R5432 implements Load, Store, LoadStreamed, StoreStreamed, LoadRetained, + * StoreRetained and WriteBackInvalidate but not Pref_PrepareForStore. + * + * Hell (and the book on my shelf I can't open ...) know what the R8000 does. + * + * RM7000 version 1.0 interprets all hints as Pref_Load; version 2.0 implements + * Pref_PrepareForStore also. + * + * RM9000 is MIPS IV but implements prefetching like MIPS32/MIPS64; it's + * Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in + * current versions due to erratum G105. + * + * VR7701 only implements the Load prefetch. + * + * Finally MIPS32 and MIPS64 implement all of the following hints. + */ + +#define Pref_Load 0 +#define Pref_Store 1 + /* 2 and 3 are reserved */ +#define Pref_LoadStreamed 4 +#define Pref_StoreStreamed 5 +#define Pref_LoadRetained 6 +#define Pref_StoreRetained 7 + /* 8 ... 24 are reserved */ +#define Pref_WriteBackInvalidate 25 +#define Pref_PrepareForStore 30 + +#ifdef __ASSEMBLY__ + + .macro __pref hint addr +#ifdef CONFIG_CPU_HAS_PREFETCH + pref \hint, \addr +#endif + .endm + + .macro pref_load addr + __pref Pref_Load, \addr + .endm + + .macro pref_store addr + __pref Pref_Store, \addr + .endm + + .macro pref_load_streamed addr + __pref Pref_LoadStreamed, \addr + .endm + + .macro pref_store_streamed addr + __pref Pref_StoreStreamed, \addr + .endm + + .macro pref_load_retained addr + __pref Pref_LoadRetained, \addr + .endm + + .macro pref_store_retained addr + __pref Pref_StoreRetained, \addr + .endm + + .macro pref_wback_inv addr + __pref Pref_WriteBackInvalidate, \addr + .endm + + .macro pref_prepare_for_store addr + __pref Pref_PrepareForStore, \addr + .endm + +#endif + +#endif /* __ASM_PREFETCH_H */ diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h new file mode 100644 index 000000000000..18ee58e39445 --- /dev/null +++ b/arch/mips/include/asm/processor.h @@ -0,0 +1,283 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 Waldorf GMBH + * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle + * Copyright (C) 1996 Paul M. Antoine + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_PROCESSOR_H +#define _ASM_PROCESSOR_H + +#include <linux/cpumask.h> +#include <linux/threads.h> + +#include <asm/cachectl.h> +#include <asm/cpu.h> +#include <asm/cpu-info.h> +#include <asm/mipsregs.h> +#include <asm/prefetch.h> +#include <asm/system.h> + +/* + * Return current * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +/* + * System setup and hardware flags.. + */ +extern void (*cpu_wait)(void); + +extern unsigned int vced_count, vcei_count; + +#ifdef CONFIG_32BIT +/* + * User space process size: 2GB. This is hardcoded into a few places, + * so don't change it unless you know what you are doing. + */ +#define TASK_SIZE 0x7fff8000UL +#define STACK_TOP TASK_SIZE + +/* + * This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE ((TASK_SIZE / 3) & ~(PAGE_SIZE)) +#endif + +#ifdef CONFIG_64BIT +/* + * User space process size: 1TB. This is hardcoded into a few places, + * so don't change it unless you know what you are doing. TASK_SIZE + * is limited to 1TB by the R4000 architecture; R10000 and better can + * support 16TB; the architectural reserve for future expansion is + * 8192EB ... + */ +#define TASK_SIZE32 0x7fff8000UL +#define TASK_SIZE 0x10000000000UL +#define STACK_TOP \ + (test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE) + +/* + * This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE \ + (test_thread_flag(TIF_32BIT_ADDR) ? \ + PAGE_ALIGN(TASK_SIZE32 / 3) : PAGE_ALIGN(TASK_SIZE / 3)) +#define TASK_SIZE_OF(tsk) \ + (test_tsk_thread_flag(tsk, TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE) +#endif + +#ifdef __KERNEL__ +#define STACK_TOP_MAX TASK_SIZE +#endif + +#define NUM_FPU_REGS 32 + +typedef __u64 fpureg_t; + +/* + * It would be nice to add some more fields for emulator statistics, but there + * are a number of fixed offsets in offset.h and elsewhere that would have to + * be recalculated by hand. So the additional information will be private to + * the FPU emulator for now. See asm-mips/fpu_emulator.h. + */ + +struct mips_fpu_struct { + fpureg_t fpr[NUM_FPU_REGS]; + unsigned int fcr31; +}; + +#define NUM_DSP_REGS 6 + +typedef __u32 dspreg_t; + +struct mips_dsp_state { + dspreg_t dspr[NUM_DSP_REGS]; + unsigned int dspcontrol; +}; + +#define INIT_CPUMASK { \ + {0,} \ +} + +struct mips3264_watch_reg_state { + /* The width of watchlo is 32 in a 32 bit kernel and 64 in a + 64 bit kernel. We use unsigned long as it has the same + property. */ + unsigned long watchlo[NUM_WATCH_REGS]; + /* Only the mask and IRW bits from watchhi. */ + u16 watchhi[NUM_WATCH_REGS]; +}; + +union mips_watch_reg_state { + struct mips3264_watch_reg_state mips3264; +}; + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define ARCH_MIN_TASKALIGN 8 + +struct mips_abi; + +/* + * If you change thread_struct remember to change the #defines below too! + */ +struct thread_struct { + /* Saved main processor registers. */ + unsigned long reg16; + unsigned long reg17, reg18, reg19, reg20, reg21, reg22, reg23; + unsigned long reg29, reg30, reg31; + + /* Saved cp0 stuff. */ + unsigned long cp0_status; + + /* Saved fpu/fpu emulator stuff. */ + struct mips_fpu_struct fpu; +#ifdef CONFIG_MIPS_MT_FPAFF + /* Emulated instruction count */ + unsigned long emulated_fp; + /* Saved per-thread scheduler affinity mask */ + cpumask_t user_cpus_allowed; +#endif /* CONFIG_MIPS_MT_FPAFF */ + + /* Saved state of the DSP ASE, if available. */ + struct mips_dsp_state dsp; + + /* Saved watch register state, if available. */ + union mips_watch_reg_state watch; + + /* Other stuff associated with the thread. */ + unsigned long cp0_badvaddr; /* Last user fault */ + unsigned long cp0_baduaddr; /* Last kernel fault accessing USEG */ + unsigned long error_code; + unsigned long trap_no; + unsigned long irix_trampoline; /* Wheee... */ + unsigned long irix_oldctx; + struct mips_abi *abi; +}; + +#ifdef CONFIG_MIPS_MT_FPAFF +#define FPAFF_INIT \ + .emulated_fp = 0, \ + .user_cpus_allowed = INIT_CPUMASK, +#else +#define FPAFF_INIT +#endif /* CONFIG_MIPS_MT_FPAFF */ + +#define INIT_THREAD { \ + /* \ + * Saved main processor registers \ + */ \ + .reg16 = 0, \ + .reg17 = 0, \ + .reg18 = 0, \ + .reg19 = 0, \ + .reg20 = 0, \ + .reg21 = 0, \ + .reg22 = 0, \ + .reg23 = 0, \ + .reg29 = 0, \ + .reg30 = 0, \ + .reg31 = 0, \ + /* \ + * Saved cp0 stuff \ + */ \ + .cp0_status = 0, \ + /* \ + * Saved FPU/FPU emulator stuff \ + */ \ + .fpu = { \ + .fpr = {0,}, \ + .fcr31 = 0, \ + }, \ + /* \ + * FPU affinity state (null if not FPAFF) \ + */ \ + FPAFF_INIT \ + /* \ + * Saved DSP stuff \ + */ \ + .dsp = { \ + .dspr = {0, }, \ + .dspcontrol = 0, \ + }, \ + /* \ + * saved watch register stuff \ + */ \ + .watch = {{{0,},},}, \ + /* \ + * Other stuff associated with the process \ + */ \ + .cp0_badvaddr = 0, \ + .cp0_baduaddr = 0, \ + .error_code = 0, \ + .trap_no = 0, \ + .irix_trampoline = 0, \ + .irix_oldctx = 0, \ +} + +struct task_struct; + +/* Free all resources held by a thread. */ +#define release_thread(thread) do { } while(0) + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +extern long kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +extern unsigned long thread_saved_pc(struct task_struct *tsk); + +/* + * Do necessary setup to start up a newly executed thread. + */ +extern void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp); + +unsigned long get_wchan(struct task_struct *p); + +#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + THREAD_SIZE - 32) +#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk) - 1) +#define KSTK_EIP(tsk) (task_pt_regs(tsk)->cp0_epc) +#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29]) +#define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status) + +#define cpu_relax() barrier() + +/* + * Return_address is a replacement for __builtin_return_address(count) + * which on certain architectures cannot reasonably be implemented in GCC + * (MIPS, Alpha) or is unuseable with -fomit-frame-pointer (i386). + * Note that __builtin_return_address(x>=1) is forbidden because GCC + * aborts compilation on some CPUs. It's simply not possible to unwind + * some CPU's stackframes. + * + * __builtin_return_address works only for non-leaf functions. We avoid the + * overhead of a function call by forcing the compiler to save the return + * address register on the stack. + */ +#define return_address() ({__asm__ __volatile__("":::"$31");__builtin_return_address(0);}) + +#ifdef CONFIG_CPU_HAS_PREFETCH + +#define ARCH_HAS_PREFETCH + +static inline void prefetch(const void *addr) +{ + __asm__ __volatile__( + " .set mips4 \n" + " pref %0, (%1) \n" + " .set mips0 \n" + : + : "i" (Pref_Load), "r" (addr)); +} + +#endif + +#endif /* _ASM_PROCESSOR_H */ diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h new file mode 100644 index 000000000000..9c22571b160d --- /dev/null +++ b/arch/mips/include/asm/ptrace.h @@ -0,0 +1,154 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_PTRACE_H +#define _ASM_PTRACE_H + +#ifdef CONFIG_64BIT +#define __ARCH_WANT_COMPAT_SYS_PTRACE +#endif + +/* 0 - 31 are integer registers, 32 - 63 are fp registers. */ +#define FPR_BASE 32 +#define PC 64 +#define CAUSE 65 +#define BADVADDR 66 +#define MMHI 67 +#define MMLO 68 +#define FPC_CSR 69 +#define FPC_EIR 70 +#define DSP_BASE 71 /* 3 more hi / lo register pairs */ +#define DSP_CONTROL 77 +#define ACX 78 + +/* + * This struct defines the way the registers are stored on the stack during a + * system call/exception. As usual the registers k0/k1 aren't being saved. + */ +struct pt_regs { +#ifdef CONFIG_32BIT + /* Pad bytes for argument save space on the stack. */ + unsigned long pad0[6]; +#endif + + /* Saved main processor registers. */ + unsigned long regs[32]; + + /* Saved special registers. */ + unsigned long cp0_status; + unsigned long hi; + unsigned long lo; +#ifdef CONFIG_CPU_HAS_SMARTMIPS + unsigned long acx; +#endif + unsigned long cp0_badvaddr; + unsigned long cp0_cause; + unsigned long cp0_epc; +#ifdef CONFIG_MIPS_MT_SMTC + unsigned long cp0_tcstatus; +#endif /* CONFIG_MIPS_MT_SMTC */ +} __attribute__ ((aligned (8))); + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +/* #define PTRACE_GETFPXREGS 18 */ +/* #define PTRACE_SETFPXREGS 19 */ + +#define PTRACE_OLDSETOPTIONS 21 + +#define PTRACE_GET_THREAD_AREA 25 +#define PTRACE_SET_THREAD_AREA 26 + +/* Calls to trace a 64bit program from a 32bit program. */ +#define PTRACE_PEEKTEXT_3264 0xc0 +#define PTRACE_PEEKDATA_3264 0xc1 +#define PTRACE_POKETEXT_3264 0xc2 +#define PTRACE_POKEDATA_3264 0xc3 +#define PTRACE_GET_THREAD_AREA_3264 0xc4 + +/* Read and write watchpoint registers. */ +enum pt_watch_style { + pt_watch_style_mips32, + pt_watch_style_mips64 +}; +struct mips32_watch_regs { + uint32_t watchlo[8]; + /* Lower 16 bits of watchhi. */ + uint16_t watchhi[8]; + /* Valid mask and I R W bits. + * bit 0 -- 1 if W bit is usable. + * bit 1 -- 1 if R bit is usable. + * bit 2 -- 1 if I bit is usable. + * bits 3 - 11 -- Valid watchhi mask bits. + */ + uint16_t watch_masks[8]; + /* The number of valid watch register pairs. */ + uint32_t num_valid; +} __attribute__((aligned(8))); + +struct mips64_watch_regs { + uint64_t watchlo[8]; + uint16_t watchhi[8]; + uint16_t watch_masks[8]; + uint32_t num_valid; +} __attribute__((aligned(8))); + +struct pt_watch_regs { + enum pt_watch_style style; + union { + struct mips32_watch_regs mips32; + struct mips32_watch_regs mips64; + }; +}; + +#define PTRACE_GET_WATCH_REGS 0xd0 +#define PTRACE_SET_WATCH_REGS 0xd1 + +#ifdef __KERNEL__ + +#include <linux/compiler.h> +#include <linux/linkage.h> +#include <asm/isadep.h> + +struct task_struct; + +extern int ptrace_getregs(struct task_struct *child, __s64 __user *data); +extern int ptrace_setregs(struct task_struct *child, __s64 __user *data); + +extern int ptrace_getfpregs(struct task_struct *child, __u32 __user *data); +extern int ptrace_setfpregs(struct task_struct *child, __u32 __user *data); + +extern int ptrace_get_watch_regs(struct task_struct *child, + struct pt_watch_regs __user *addr); +extern int ptrace_set_watch_regs(struct task_struct *child, + struct pt_watch_regs __user *addr); + +/* + * Does the process account for user or for system time? + */ +#define user_mode(regs) (((regs)->cp0_status & KU_MASK) == KU_USER) + +#define instruction_pointer(regs) ((regs)->cp0_epc) +#define profile_pc(regs) instruction_pointer(regs) + +extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit); + +extern NORET_TYPE void die(const char *, const struct pt_regs *) ATTRIB_NORET; + +static inline void die_if_kernel(const char *str, const struct pt_regs *regs) +{ + if (unlikely(!user_mode(regs))) + die(str, regs); +} + +#endif + +#endif /* _ASM_PTRACE_H */ diff --git a/arch/mips/include/asm/r4k-timer.h b/arch/mips/include/asm/r4k-timer.h new file mode 100644 index 000000000000..a37d12b3b61c --- /dev/null +++ b/arch/mips/include/asm/r4k-timer.h @@ -0,0 +1,30 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 by Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_R4K_TYPES_H +#define __ASM_R4K_TYPES_H + +#include <linux/compiler.h> + +#ifdef CONFIG_SYNC_R4K + +extern void synchronise_count_master(void); +extern void synchronise_count_slave(void); + +#else + +static inline void synchronise_count_master(void) +{ +} + +static inline void synchronise_count_slave(void) +{ +} + +#endif + +#endif /* __ASM_R4K_TYPES_H */ diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h new file mode 100644 index 000000000000..4c140db36786 --- /dev/null +++ b/arch/mips/include/asm/r4kcache.h @@ -0,0 +1,443 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Inline assembly cache operations. + * + * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 1997 - 2002 Ralf Baechle (ralf@gnu.org) + * Copyright (C) 2004 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef _ASM_R4KCACHE_H +#define _ASM_R4KCACHE_H + +#include <asm/asm.h> +#include <asm/cacheops.h> +#include <asm/cpu-features.h> +#include <asm/mipsmtregs.h> + +/* + * This macro return a properly sign-extended address suitable as base address + * for indexed cache operations. Two issues here: + * + * - The MIPS32 and MIPS64 specs permit an implementation to directly derive + * the index bits from the virtual address. This breaks with tradition + * set by the R4000. To keep unpleasant surprises from happening we pick + * an address in KSEG0 / CKSEG0. + * - We need a properly sign extended address for 64-bit code. To get away + * without ifdefs we let the compiler do it by a type cast. + */ +#define INDEX_BASE CKSEG0 + +#define cache_op(op,addr) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noreorder \n" \ + " .set mips3\n\t \n" \ + " cache %0, %1 \n" \ + " .set pop \n" \ + : \ + : "i" (op), "R" (*(unsigned char *)(addr))) + +#ifdef CONFIG_MIPS_MT +/* + * Temporary hacks for SMTC debug. Optionally force single-threaded + * execution during I-cache flushes. + */ + +#define PROTECT_CACHE_FLUSHES 1 + +#ifdef PROTECT_CACHE_FLUSHES + +extern int mt_protiflush; +extern int mt_protdflush; +extern void mt_cflush_lockdown(void); +extern void mt_cflush_release(void); + +#define BEGIN_MT_IPROT \ + unsigned long flags = 0; \ + unsigned long mtflags = 0; \ + if(mt_protiflush) { \ + local_irq_save(flags); \ + ehb(); \ + mtflags = dvpe(); \ + mt_cflush_lockdown(); \ + } + +#define END_MT_IPROT \ + if(mt_protiflush) { \ + mt_cflush_release(); \ + evpe(mtflags); \ + local_irq_restore(flags); \ + } + +#define BEGIN_MT_DPROT \ + unsigned long flags = 0; \ + unsigned long mtflags = 0; \ + if(mt_protdflush) { \ + local_irq_save(flags); \ + ehb(); \ + mtflags = dvpe(); \ + mt_cflush_lockdown(); \ + } + +#define END_MT_DPROT \ + if(mt_protdflush) { \ + mt_cflush_release(); \ + evpe(mtflags); \ + local_irq_restore(flags); \ + } + +#else + +#define BEGIN_MT_IPROT +#define BEGIN_MT_DPROT +#define END_MT_IPROT +#define END_MT_DPROT + +#endif /* PROTECT_CACHE_FLUSHES */ + +#define __iflush_prologue \ + unsigned long redundance; \ + extern int mt_n_iflushes; \ + BEGIN_MT_IPROT \ + for (redundance = 0; redundance < mt_n_iflushes; redundance++) { + +#define __iflush_epilogue \ + END_MT_IPROT \ + } + +#define __dflush_prologue \ + unsigned long redundance; \ + extern int mt_n_dflushes; \ + BEGIN_MT_DPROT \ + for (redundance = 0; redundance < mt_n_dflushes; redundance++) { + +#define __dflush_epilogue \ + END_MT_DPROT \ + } + +#define __inv_dflush_prologue __dflush_prologue +#define __inv_dflush_epilogue __dflush_epilogue +#define __sflush_prologue { +#define __sflush_epilogue } +#define __inv_sflush_prologue __sflush_prologue +#define __inv_sflush_epilogue __sflush_epilogue + +#else /* CONFIG_MIPS_MT */ + +#define __iflush_prologue { +#define __iflush_epilogue } +#define __dflush_prologue { +#define __dflush_epilogue } +#define __inv_dflush_prologue { +#define __inv_dflush_epilogue } +#define __sflush_prologue { +#define __sflush_epilogue } +#define __inv_sflush_prologue { +#define __inv_sflush_epilogue } + +#endif /* CONFIG_MIPS_MT */ + +static inline void flush_icache_line_indexed(unsigned long addr) +{ + __iflush_prologue + cache_op(Index_Invalidate_I, addr); + __iflush_epilogue +} + +static inline void flush_dcache_line_indexed(unsigned long addr) +{ + __dflush_prologue + cache_op(Index_Writeback_Inv_D, addr); + __dflush_epilogue +} + +static inline void flush_scache_line_indexed(unsigned long addr) +{ + cache_op(Index_Writeback_Inv_SD, addr); +} + +static inline void flush_icache_line(unsigned long addr) +{ + __iflush_prologue + cache_op(Hit_Invalidate_I, addr); + __iflush_epilogue +} + +static inline void flush_dcache_line(unsigned long addr) +{ + __dflush_prologue + cache_op(Hit_Writeback_Inv_D, addr); + __dflush_epilogue +} + +static inline void invalidate_dcache_line(unsigned long addr) +{ + __dflush_prologue + cache_op(Hit_Invalidate_D, addr); + __dflush_epilogue +} + +static inline void invalidate_scache_line(unsigned long addr) +{ + cache_op(Hit_Invalidate_SD, addr); +} + +static inline void flush_scache_line(unsigned long addr) +{ + cache_op(Hit_Writeback_Inv_SD, addr); +} + +#define protected_cache_op(op,addr) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noreorder \n" \ + " .set mips3 \n" \ + "1: cache %0, (%1) \n" \ + "2: .set pop \n" \ + " .section __ex_table,\"a\" \n" \ + " "STR(PTR)" 1b, 2b \n" \ + " .previous" \ + : \ + : "i" (op), "r" (addr)) + +/* + * The next two are for badland addresses like signal trampolines. + */ +static inline void protected_flush_icache_line(unsigned long addr) +{ + protected_cache_op(Hit_Invalidate_I, addr); +} + +/* + * R10000 / R12000 hazard - these processors don't support the Hit_Writeback_D + * cacheop so we use Hit_Writeback_Inv_D which is supported by all R4000-style + * caches. We're talking about one cacheline unnecessarily getting invalidated + * here so the penalty isn't overly hard. + */ +static inline void protected_writeback_dcache_line(unsigned long addr) +{ + protected_cache_op(Hit_Writeback_Inv_D, addr); +} + +static inline void protected_writeback_scache_line(unsigned long addr) +{ + protected_cache_op(Hit_Writeback_Inv_SD, addr); +} + +/* + * This one is RM7000-specific + */ +static inline void invalidate_tcache_page(unsigned long addr) +{ + cache_op(Page_Invalidate_T, addr); +} + +#define cache16_unroll32(base,op) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noreorder \n" \ + " .set mips3 \n" \ + " cache %1, 0x000(%0); cache %1, 0x010(%0) \n" \ + " cache %1, 0x020(%0); cache %1, 0x030(%0) \n" \ + " cache %1, 0x040(%0); cache %1, 0x050(%0) \n" \ + " cache %1, 0x060(%0); cache %1, 0x070(%0) \n" \ + " cache %1, 0x080(%0); cache %1, 0x090(%0) \n" \ + " cache %1, 0x0a0(%0); cache %1, 0x0b0(%0) \n" \ + " cache %1, 0x0c0(%0); cache %1, 0x0d0(%0) \n" \ + " cache %1, 0x0e0(%0); cache %1, 0x0f0(%0) \n" \ + " cache %1, 0x100(%0); cache %1, 0x110(%0) \n" \ + " cache %1, 0x120(%0); cache %1, 0x130(%0) \n" \ + " cache %1, 0x140(%0); cache %1, 0x150(%0) \n" \ + " cache %1, 0x160(%0); cache %1, 0x170(%0) \n" \ + " cache %1, 0x180(%0); cache %1, 0x190(%0) \n" \ + " cache %1, 0x1a0(%0); cache %1, 0x1b0(%0) \n" \ + " cache %1, 0x1c0(%0); cache %1, 0x1d0(%0) \n" \ + " cache %1, 0x1e0(%0); cache %1, 0x1f0(%0) \n" \ + " .set pop \n" \ + : \ + : "r" (base), \ + "i" (op)); + +#define cache32_unroll32(base,op) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noreorder \n" \ + " .set mips3 \n" \ + " cache %1, 0x000(%0); cache %1, 0x020(%0) \n" \ + " cache %1, 0x040(%0); cache %1, 0x060(%0) \n" \ + " cache %1, 0x080(%0); cache %1, 0x0a0(%0) \n" \ + " cache %1, 0x0c0(%0); cache %1, 0x0e0(%0) \n" \ + " cache %1, 0x100(%0); cache %1, 0x120(%0) \n" \ + " cache %1, 0x140(%0); cache %1, 0x160(%0) \n" \ + " cache %1, 0x180(%0); cache %1, 0x1a0(%0) \n" \ + " cache %1, 0x1c0(%0); cache %1, 0x1e0(%0) \n" \ + " cache %1, 0x200(%0); cache %1, 0x220(%0) \n" \ + " cache %1, 0x240(%0); cache %1, 0x260(%0) \n" \ + " cache %1, 0x280(%0); cache %1, 0x2a0(%0) \n" \ + " cache %1, 0x2c0(%0); cache %1, 0x2e0(%0) \n" \ + " cache %1, 0x300(%0); cache %1, 0x320(%0) \n" \ + " cache %1, 0x340(%0); cache %1, 0x360(%0) \n" \ + " cache %1, 0x380(%0); cache %1, 0x3a0(%0) \n" \ + " cache %1, 0x3c0(%0); cache %1, 0x3e0(%0) \n" \ + " .set pop \n" \ + : \ + : "r" (base), \ + "i" (op)); + +#define cache64_unroll32(base,op) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noreorder \n" \ + " .set mips3 \n" \ + " cache %1, 0x000(%0); cache %1, 0x040(%0) \n" \ + " cache %1, 0x080(%0); cache %1, 0x0c0(%0) \n" \ + " cache %1, 0x100(%0); cache %1, 0x140(%0) \n" \ + " cache %1, 0x180(%0); cache %1, 0x1c0(%0) \n" \ + " cache %1, 0x200(%0); cache %1, 0x240(%0) \n" \ + " cache %1, 0x280(%0); cache %1, 0x2c0(%0) \n" \ + " cache %1, 0x300(%0); cache %1, 0x340(%0) \n" \ + " cache %1, 0x380(%0); cache %1, 0x3c0(%0) \n" \ + " cache %1, 0x400(%0); cache %1, 0x440(%0) \n" \ + " cache %1, 0x480(%0); cache %1, 0x4c0(%0) \n" \ + " cache %1, 0x500(%0); cache %1, 0x540(%0) \n" \ + " cache %1, 0x580(%0); cache %1, 0x5c0(%0) \n" \ + " cache %1, 0x600(%0); cache %1, 0x640(%0) \n" \ + " cache %1, 0x680(%0); cache %1, 0x6c0(%0) \n" \ + " cache %1, 0x700(%0); cache %1, 0x740(%0) \n" \ + " cache %1, 0x780(%0); cache %1, 0x7c0(%0) \n" \ + " .set pop \n" \ + : \ + : "r" (base), \ + "i" (op)); + +#define cache128_unroll32(base,op) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noreorder \n" \ + " .set mips3 \n" \ + " cache %1, 0x000(%0); cache %1, 0x080(%0) \n" \ + " cache %1, 0x100(%0); cache %1, 0x180(%0) \n" \ + " cache %1, 0x200(%0); cache %1, 0x280(%0) \n" \ + " cache %1, 0x300(%0); cache %1, 0x380(%0) \n" \ + " cache %1, 0x400(%0); cache %1, 0x480(%0) \n" \ + " cache %1, 0x500(%0); cache %1, 0x580(%0) \n" \ + " cache %1, 0x600(%0); cache %1, 0x680(%0) \n" \ + " cache %1, 0x700(%0); cache %1, 0x780(%0) \n" \ + " cache %1, 0x800(%0); cache %1, 0x880(%0) \n" \ + " cache %1, 0x900(%0); cache %1, 0x980(%0) \n" \ + " cache %1, 0xa00(%0); cache %1, 0xa80(%0) \n" \ + " cache %1, 0xb00(%0); cache %1, 0xb80(%0) \n" \ + " cache %1, 0xc00(%0); cache %1, 0xc80(%0) \n" \ + " cache %1, 0xd00(%0); cache %1, 0xd80(%0) \n" \ + " cache %1, 0xe00(%0); cache %1, 0xe80(%0) \n" \ + " cache %1, 0xf00(%0); cache %1, 0xf80(%0) \n" \ + " .set pop \n" \ + : \ + : "r" (base), \ + "i" (op)); + +/* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */ +#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \ +static inline void blast_##pfx##cache##lsize(void) \ +{ \ + unsigned long start = INDEX_BASE; \ + unsigned long end = start + current_cpu_data.desc.waysize; \ + unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit; \ + unsigned long ws_end = current_cpu_data.desc.ways << \ + current_cpu_data.desc.waybit; \ + unsigned long ws, addr; \ + \ + __##pfx##flush_prologue \ + \ + for (ws = 0; ws < ws_end; ws += ws_inc) \ + for (addr = start; addr < end; addr += lsize * 32) \ + cache##lsize##_unroll32(addr|ws, indexop); \ + \ + __##pfx##flush_epilogue \ +} \ + \ +static inline void blast_##pfx##cache##lsize##_page(unsigned long page) \ +{ \ + unsigned long start = page; \ + unsigned long end = page + PAGE_SIZE; \ + \ + __##pfx##flush_prologue \ + \ + do { \ + cache##lsize##_unroll32(start, hitop); \ + start += lsize * 32; \ + } while (start < end); \ + \ + __##pfx##flush_epilogue \ +} \ + \ +static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) \ +{ \ + unsigned long indexmask = current_cpu_data.desc.waysize - 1; \ + unsigned long start = INDEX_BASE + (page & indexmask); \ + unsigned long end = start + PAGE_SIZE; \ + unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit; \ + unsigned long ws_end = current_cpu_data.desc.ways << \ + current_cpu_data.desc.waybit; \ + unsigned long ws, addr; \ + \ + __##pfx##flush_prologue \ + \ + for (ws = 0; ws < ws_end; ws += ws_inc) \ + for (addr = start; addr < end; addr += lsize * 32) \ + cache##lsize##_unroll32(addr|ws, indexop); \ + \ + __##pfx##flush_epilogue \ +} + +__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16) +__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16) +__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16) +__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32) +__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32) +__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32) +__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64) +__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64) +__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128) + +__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16) +__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32) +__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16) +__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32) +__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64) +__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128) + +/* build blast_xxx_range, protected_blast_xxx_range */ +#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \ +static inline void prot##blast_##pfx##cache##_range(unsigned long start, \ + unsigned long end) \ +{ \ + unsigned long lsize = cpu_##desc##_line_size(); \ + unsigned long addr = start & ~(lsize - 1); \ + unsigned long aend = (end - 1) & ~(lsize - 1); \ + \ + __##pfx##flush_prologue \ + \ + while (1) { \ + prot##cache_op(hitop, addr); \ + if (addr == aend) \ + break; \ + addr += lsize; \ + } \ + \ + __##pfx##flush_epilogue \ +} + +__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_) +__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_) +__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_) +__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, ) +__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, ) +/* blast_inv_dcache_range */ +__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, ) +__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, ) + +#endif /* _ASM_R4KCACHE_H */ diff --git a/arch/mips/include/asm/reboot.h b/arch/mips/include/asm/reboot.h new file mode 100644 index 000000000000..e48c0bfab257 --- /dev/null +++ b/arch/mips/include/asm/reboot.h @@ -0,0 +1,15 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997, 1999, 2001, 06 by Ralf Baechle + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#ifndef _ASM_REBOOT_H +#define _ASM_REBOOT_H + +extern void (*_machine_restart)(char *command); +extern void (*_machine_halt)(void); + +#endif /* _ASM_REBOOT_H */ diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h new file mode 100644 index 000000000000..634b55d7e7f6 --- /dev/null +++ b/arch/mips/include/asm/reg.h @@ -0,0 +1,128 @@ +/* + * Various register offset definitions for debuggers, core file + * examiners and whatnot. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999 Ralf Baechle + * Copyright (C) 1995, 1999 Silicon Graphics + */ +#ifndef __ASM_MIPS_REG_H +#define __ASM_MIPS_REG_H + + +#if defined(CONFIG_32BIT) || defined(WANT_COMPAT_REG_H) + +#define EF_R0 6 +#define EF_R1 7 +#define EF_R2 8 +#define EF_R3 9 +#define EF_R4 10 +#define EF_R5 11 +#define EF_R6 12 +#define EF_R7 13 +#define EF_R8 14 +#define EF_R9 15 +#define EF_R10 16 +#define EF_R11 17 +#define EF_R12 18 +#define EF_R13 19 +#define EF_R14 20 +#define EF_R15 21 +#define EF_R16 22 +#define EF_R17 23 +#define EF_R18 24 +#define EF_R19 25 +#define EF_R20 26 +#define EF_R21 27 +#define EF_R22 28 +#define EF_R23 29 +#define EF_R24 30 +#define EF_R25 31 + +/* + * k0/k1 unsaved + */ +#define EF_R26 32 +#define EF_R27 33 + +#define EF_R28 34 +#define EF_R29 35 +#define EF_R30 36 +#define EF_R31 37 + +/* + * Saved special registers + */ +#define EF_LO 38 +#define EF_HI 39 + +#define EF_CP0_EPC 40 +#define EF_CP0_BADVADDR 41 +#define EF_CP0_STATUS 42 +#define EF_CP0_CAUSE 43 +#define EF_UNUSED0 44 + +#define EF_SIZE 180 + +#endif + +#ifdef CONFIG_64BIT + +#define EF_R0 0 +#define EF_R1 1 +#define EF_R2 2 +#define EF_R3 3 +#define EF_R4 4 +#define EF_R5 5 +#define EF_R6 6 +#define EF_R7 7 +#define EF_R8 8 +#define EF_R9 9 +#define EF_R10 10 +#define EF_R11 11 +#define EF_R12 12 +#define EF_R13 13 +#define EF_R14 14 +#define EF_R15 15 +#define EF_R16 16 +#define EF_R17 17 +#define EF_R18 18 +#define EF_R19 19 +#define EF_R20 20 +#define EF_R21 21 +#define EF_R22 22 +#define EF_R23 23 +#define EF_R24 24 +#define EF_R25 25 + +/* + * k0/k1 unsaved + */ +#define EF_R26 26 +#define EF_R27 27 + + +#define EF_R28 28 +#define EF_R29 29 +#define EF_R30 30 +#define EF_R31 31 + +/* + * Saved special registers + */ +#define EF_LO 32 +#define EF_HI 33 + +#define EF_CP0_EPC 34 +#define EF_CP0_BADVADDR 35 +#define EF_CP0_STATUS 36 +#define EF_CP0_CAUSE 37 + +#define EF_SIZE 304 /* size in bytes */ + +#endif /* CONFIG_64BIT */ + +#endif /* __ASM_MIPS_REG_H */ diff --git a/arch/mips/include/asm/regdef.h b/arch/mips/include/asm/regdef.h new file mode 100644 index 000000000000..7c8ecb6b9c40 --- /dev/null +++ b/arch/mips/include/asm/regdef.h @@ -0,0 +1,100 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1985 MIPS Computer Systems, Inc. + * Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle + * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_REGDEF_H +#define _ASM_REGDEF_H + +#include <asm/sgidefs.h> + +#if _MIPS_SIM == _MIPS_SIM_ABI32 + +/* + * Symbolic register names for 32 bit ABI + */ +#define zero $0 /* wired zero */ +#define AT $1 /* assembler temp - uppercase because of ".set at" */ +#define v0 $2 /* return value */ +#define v1 $3 +#define a0 $4 /* argument registers */ +#define a1 $5 +#define a2 $6 +#define a3 $7 +#define t0 $8 /* caller saved */ +#define t1 $9 +#define t2 $10 +#define t3 $11 +#define t4 $12 +#define t5 $13 +#define t6 $14 +#define t7 $15 +#define s0 $16 /* callee saved */ +#define s1 $17 +#define s2 $18 +#define s3 $19 +#define s4 $20 +#define s5 $21 +#define s6 $22 +#define s7 $23 +#define t8 $24 /* caller saved */ +#define t9 $25 +#define jp $25 /* PIC jump register */ +#define k0 $26 /* kernel scratch */ +#define k1 $27 +#define gp $28 /* global pointer */ +#define sp $29 /* stack pointer */ +#define fp $30 /* frame pointer */ +#define s8 $30 /* same like fp! */ +#define ra $31 /* return address */ + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ + +#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 + +#define zero $0 /* wired zero */ +#define AT $at /* assembler temp - uppercase because of ".set at" */ +#define v0 $2 /* return value - caller saved */ +#define v1 $3 +#define a0 $4 /* argument registers */ +#define a1 $5 +#define a2 $6 +#define a3 $7 +#define a4 $8 /* arg reg 64 bit; caller saved in 32 bit */ +#define ta0 $8 +#define a5 $9 +#define ta1 $9 +#define a6 $10 +#define ta2 $10 +#define a7 $11 +#define ta3 $11 +#define t0 $12 /* caller saved */ +#define t1 $13 +#define t2 $14 +#define t3 $15 +#define s0 $16 /* callee saved */ +#define s1 $17 +#define s2 $18 +#define s3 $19 +#define s4 $20 +#define s5 $21 +#define s6 $22 +#define s7 $23 +#define t8 $24 /* caller saved */ +#define t9 $25 /* callee address for PIC/temp */ +#define jp $25 /* PIC jump register */ +#define k0 $26 /* kernel temporary */ +#define k1 $27 +#define gp $28 /* global pointer - caller saved for PIC */ +#define sp $29 /* stack pointer */ +#define fp $30 /* frame pointer */ +#define s8 $30 /* callee saved */ +#define ra $31 /* return address */ + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */ + +#endif /* _ASM_REGDEF_H */ diff --git a/arch/mips/include/asm/resource.h b/arch/mips/include/asm/resource.h new file mode 100644 index 000000000000..87cb3085269c --- /dev/null +++ b/arch/mips/include/asm/resource.h @@ -0,0 +1,35 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 98, 99, 2000 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_RESOURCE_H +#define _ASM_RESOURCE_H + + +/* + * These five resource limit IDs have a MIPS/Linux-specific ordering, + * the rest comes from the generic header: + */ +#define RLIMIT_NOFILE 5 /* max number of open files */ +#define RLIMIT_AS 6 /* address space limit */ +#define RLIMIT_RSS 7 /* max resident set size */ +#define RLIMIT_NPROC 8 /* max number of processes */ +#define RLIMIT_MEMLOCK 9 /* max locked-in-memory address space */ + +/* + * SuS says limits have to be unsigned. + * Which makes a ton more sense anyway, + * but we keep the old value on MIPS32, + * for compatibility: + */ +#ifdef CONFIG_32BIT +# define RLIM_INFINITY 0x7fffffffUL +#endif + +#include <asm-generic/resource.h> + +#endif /* _ASM_RESOURCE_H */ diff --git a/arch/mips/include/asm/rm9k-ocd.h b/arch/mips/include/asm/rm9k-ocd.h new file mode 100644 index 000000000000..b0b80d9ecf96 --- /dev/null +++ b/arch/mips/include/asm/rm9k-ocd.h @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2004 by Basler Vision Technologies AG + * Author: Thomas Koeller <thomas.koeller@baslerweb.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if !defined(_ASM_RM9K_OCD_H) +#define _ASM_RM9K_OCD_H + +#include <linux/types.h> +#include <linux/spinlock.h> +#include <asm/io.h> + +extern volatile void __iomem * const ocd_base; +extern volatile void __iomem * const titan_base; + +#define ocd_addr(__x__) (ocd_base + (__x__)) +#define titan_addr(__x__) (titan_base + (__x__)) +#define scram_addr(__x__) (scram_base + (__x__)) + +/* OCD register access */ +#define ocd_readl(__offs__) __raw_readl(ocd_addr(__offs__)) +#define ocd_readw(__offs__) __raw_readw(ocd_addr(__offs__)) +#define ocd_readb(__offs__) __raw_readb(ocd_addr(__offs__)) +#define ocd_writel(__val__, __offs__) \ + __raw_writel((__val__), ocd_addr(__offs__)) +#define ocd_writew(__val__, __offs__) \ + __raw_writew((__val__), ocd_addr(__offs__)) +#define ocd_writeb(__val__, __offs__) \ + __raw_writeb((__val__), ocd_addr(__offs__)) + +/* TITAN register access - 32 bit-wide only */ +#define titan_readl(__offs__) __raw_readl(titan_addr(__offs__)) +#define titan_writel(__val__, __offs__) \ + __raw_writel((__val__), titan_addr(__offs__)) + +/* Protect access to shared TITAN registers */ +extern spinlock_t titan_lock; +extern int titan_irqflags; +#define lock_titan_regs() spin_lock_irqsave(&titan_lock, titan_irqflags) +#define unlock_titan_regs() spin_unlock_irqrestore(&titan_lock, titan_irqflags) + +#endif /* !defined(_ASM_RM9K_OCD_H) */ diff --git a/arch/mips/include/asm/rtlx.h b/arch/mips/include/asm/rtlx.h new file mode 100644 index 000000000000..4ca3063ed2ce --- /dev/null +++ b/arch/mips/include/asm/rtlx.h @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. + * + */ + +#ifndef __ASM_RTLX_H_ +#define __ASM_RTLX_H_ + +#include <irq.h> + +#define LX_NODE_BASE 10 + +#define MIPS_CPU_RTLX_IRQ 0 + +#define RTLX_VERSION 2 +#define RTLX_xID 0x12345600 +#define RTLX_ID (RTLX_xID | RTLX_VERSION) +#define RTLX_CHANNELS 8 + +#define RTLX_CHANNEL_STDIO 0 +#define RTLX_CHANNEL_DBG 1 +#define RTLX_CHANNEL_SYSIO 2 + +extern int rtlx_open(int index, int can_sleep); +extern int rtlx_release(int index); +extern ssize_t rtlx_read(int index, void __user *buff, size_t count); +extern ssize_t rtlx_write(int index, const void __user *buffer, size_t count); +extern unsigned int rtlx_read_poll(int index, int can_sleep); +extern unsigned int rtlx_write_poll(int index); + +enum rtlx_state { + RTLX_STATE_UNUSED = 0, + RTLX_STATE_INITIALISED, + RTLX_STATE_REMOTE_READY, + RTLX_STATE_OPENED +}; + +#define RTLX_BUFFER_SIZE 2048 + +/* each channel supports read and write. + linux (vpe0) reads lx_buffer and writes rt_buffer + SP (vpe1) reads rt_buffer and writes lx_buffer +*/ +struct rtlx_channel { + enum rtlx_state rt_state; + enum rtlx_state lx_state; + + int buffer_size; + + /* read and write indexes per buffer */ + int rt_write, rt_read; + char *rt_buffer; + + int lx_write, lx_read; + char *lx_buffer; +}; + +struct rtlx_info { + unsigned long id; + enum rtlx_state state; + + struct rtlx_channel channel[RTLX_CHANNELS]; +}; + +#endif /* __ASM_RTLX_H_ */ diff --git a/arch/mips/include/asm/scatterlist.h b/arch/mips/include/asm/scatterlist.h new file mode 100644 index 000000000000..83d69fe17c9f --- /dev/null +++ b/arch/mips/include/asm/scatterlist.h @@ -0,0 +1,28 @@ +#ifndef __ASM_SCATTERLIST_H +#define __ASM_SCATTERLIST_H + +#include <asm/types.h> + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + dma_addr_t dma_address; + unsigned int length; +}; + +/* + * These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#define ISA_DMA_THRESHOLD (0x00ffffffUL) + +#endif /* __ASM_SCATTERLIST_H */ diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h new file mode 100644 index 000000000000..36ed44070256 --- /dev/null +++ b/arch/mips/include/asm/seccomp.h @@ -0,0 +1,37 @@ +#ifndef __ASM_SECCOMP_H + +#include <linux/thread_info.h> +#include <linux/unistd.h> + +#define __NR_seccomp_read __NR_read +#define __NR_seccomp_write __NR_write +#define __NR_seccomp_exit __NR_exit +#define __NR_seccomp_sigreturn __NR_rt_sigreturn + +/* + * Kludge alert: + * + * The generic seccomp code currently allows only a single compat ABI. Until + * this is fixed we priorize O32 as the compat ABI over N32. + */ +#ifdef CONFIG_MIPS32_O32 + +#define TIF_32BIT TIF_32BIT_REGS + +#define __NR_seccomp_read_32 4003 +#define __NR_seccomp_write_32 4004 +#define __NR_seccomp_exit_32 4001 +#define __NR_seccomp_sigreturn_32 4193 /* rt_sigreturn */ + +#elif defined(CONFIG_MIPS32_N32) + +#define TIF_32BIT _TIF_32BIT_ADDR + +#define __NR_seccomp_read_32 6000 +#define __NR_seccomp_write_32 6001 +#define __NR_seccomp_exit_32 6058 +#define __NR_seccomp_sigreturn_32 6211 /* rt_sigreturn */ + +#endif /* CONFIG_MIPS32_O32 */ + +#endif /* __ASM_SECCOMP_H */ diff --git a/arch/mips/include/asm/sections.h b/arch/mips/include/asm/sections.h new file mode 100644 index 000000000000..b7e37262c246 --- /dev/null +++ b/arch/mips/include/asm/sections.h @@ -0,0 +1,6 @@ +#ifndef _ASM_SECTIONS_H +#define _ASM_SECTIONS_H + +#include <asm-generic/sections.h> + +#endif /* _ASM_SECTIONS_H */ diff --git a/arch/mips/include/asm/segment.h b/arch/mips/include/asm/segment.h new file mode 100644 index 000000000000..92ac001fc483 --- /dev/null +++ b/arch/mips/include/asm/segment.h @@ -0,0 +1,6 @@ +#ifndef _ASM_SEGMENT_H +#define _ASM_SEGMENT_H + +/* Only here because we have some old header files that expect it.. */ + +#endif /* _ASM_SEGMENT_H */ diff --git a/arch/mips/include/asm/sembuf.h b/arch/mips/include/asm/sembuf.h new file mode 100644 index 000000000000..7281a4decaa0 --- /dev/null +++ b/arch/mips/include/asm/sembuf.h @@ -0,0 +1,22 @@ +#ifndef _ASM_SEMBUF_H +#define _ASM_SEMBUF_H + +/* + * The semid64_ds structure for the MIPS architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 2 miscellaneous 64-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + __kernel_time_t sem_ctime; /* last change time */ + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ASM_SEMBUF_H */ diff --git a/arch/mips/include/asm/serial.h b/arch/mips/include/asm/serial.h new file mode 100644 index 000000000000..c07ebd8eb9e7 --- /dev/null +++ b/arch/mips/include/asm/serial.h @@ -0,0 +1,22 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H + + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD (1843200 / 16) + +#endif /* _ASM_SERIAL_H */ diff --git a/arch/mips/include/asm/setup.h b/arch/mips/include/asm/setup.h new file mode 100644 index 000000000000..e600cedda976 --- /dev/null +++ b/arch/mips/include/asm/setup.h @@ -0,0 +1,10 @@ +#ifndef _MIPS_SETUP_H +#define _MIPS_SETUP_H + +#define COMMAND_LINE_SIZE 256 + +#ifdef __KERNEL__ +extern void setup_early_printk(void); +#endif /* __KERNEL__ */ + +#endif /* __SETUP_H */ diff --git a/arch/mips/include/asm/sgi/gio.h b/arch/mips/include/asm/sgi/gio.h new file mode 100644 index 000000000000..889cf028c95d --- /dev/null +++ b/arch/mips/include/asm/sgi/gio.h @@ -0,0 +1,86 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * gio.h: Definitions for SGI GIO bus + * + * Copyright (C) 2002 Ladislav Michl + */ + +#ifndef _SGI_GIO_H +#define _SGI_GIO_H + +/* + * GIO bus addresses + * + * The Indigo and Indy have two GIO bus connectors. Indigo2 (all models) have + * three physical connectors, but only two slots, GFX and EXP0. + * + * There is 10MB of GIO address space for GIO64 slot devices + * slot# slot type address range size + * ----- --------- ----------------------- ----- + * 0 GFX 0x1f000000 - 0x1f3fffff 4MB + * 1 EXP0 0x1f400000 - 0x1f5fffff 2MB + * 2 EXP1 0x1f600000 - 0x1f9fffff 4MB + * + * There are un-slotted devices, HPC, I/O and misc devices, which are grouped + * into the HPC address space. + * - MISC 0x1fb00000 - 0x1fbfffff 1MB + * + * Following space is reserved and unused + * - RESERVED 0x18000000 - 0x1effffff 112MB + * + * GIO bus IDs + * + * Each GIO bus device identifies itself to the system by answering a + * read with an "ID" value. IDs are either 8 or 32 bits long. IDs less + * than 128 are 8 bits long, with the most significant 24 bits read from + * the slot undefined. + * + * 32-bit IDs are divided into + * bits 0:6 the product ID; ranges from 0x00 to 0x7F. + * bit 7 0=GIO Product ID is 8 bits wide + * 1=GIO Product ID is 32 bits wide. + * bits 8:15 manufacturer version for the product. + * bit 16 0=GIO32 and GIO32-bis, 1=GIO64. + * bit 17 0=no ROM present + * 1=ROM present on this board AND next three words + * space define the ROM. + * bits 18:31 up to manufacturer. + * + * IDs above 0x50/0xd0 are of 3rd party boards. + * + * 8-bit IDs + * 0x01 XPI low cost FDDI + * 0x02 GTR TokenRing + * 0x04 Synchronous ISDN + * 0x05 ATM board [*] + * 0x06 Canon Interface + * 0x07 16 bit SCSI Card [*] + * 0x08 JPEG (Double Wide) + * 0x09 JPEG (Single Wide) + * 0x0a XPI mez. FDDI device 0 + * 0x0b XPI mez. FDDI device 1 + * 0x0c SMPTE 259M Video [*] + * 0x0d Babblefish Compression [*] + * 0x0e E-Plex 8-port Ethernet + * 0x30 Lyon Lamb IVAS + * 0xb8 GIO 100BaseTX Fast Ethernet (gfe) + * + * [*] Device provide 32-bit ID. + * + */ + +#define GIO_ID(x) (x & 0x7f) +#define GIO_32BIT_ID 0x80 +#define GIO_REV(x) ((x >> 8) & 0xff) +#define GIO_64BIT_IFACE 0x10000 +#define GIO_ROM_PRESENT 0x20000 +#define GIO_VENDOR_CODE(x) ((x >> 18) & 0x3fff) + +#define GIO_SLOT_GFX_BASE 0x1f000000 +#define GIO_SLOT_EXP0_BASE 0x1f400000 +#define GIO_SLOT_EXP1_BASE 0x1f600000 + +#endif /* _SGI_GIO_H */ diff --git a/arch/mips/include/asm/sgi/hpc3.h b/arch/mips/include/asm/sgi/hpc3.h new file mode 100644 index 000000000000..c4729f531919 --- /dev/null +++ b/arch/mips/include/asm/sgi/hpc3.h @@ -0,0 +1,317 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * hpc3.h: Definitions for SGI HPC3 controller + * + * Copyright (C) 1996 David S. Miller + * Copyright (C) 1998 Ralf Baechle + */ + +#ifndef _SGI_HPC3_H +#define _SGI_HPC3_H + +#include <linux/types.h> +#include <asm/page.h> + +/* An HPC DMA descriptor. */ +struct hpc_dma_desc { + u32 pbuf; /* physical address of data buffer */ + u32 cntinfo; /* counter and info bits */ +#define HPCDMA_EOX 0x80000000 /* last desc in chain for tx */ +#define HPCDMA_EOR 0x80000000 /* last desc in chain for rx */ +#define HPCDMA_EOXP 0x40000000 /* end of packet for tx */ +#define HPCDMA_EORP 0x40000000 /* end of packet for rx */ +#define HPCDMA_XIE 0x20000000 /* irq generated when at end of this desc */ +#define HPCDMA_XIU 0x01000000 /* Tx buffer in use by CPU. */ +#define HPCDMA_EIPC 0x00ff0000 /* SEEQ ethernet special xternal bytecount */ +#define HPCDMA_ETXD 0x00008000 /* set to one by HPC when packet tx'd */ +#define HPCDMA_OWN 0x00004000 /* Denotes ring buffer ownership on rx */ +#define HPCDMA_BCNT 0x00003fff /* size in bytes of this dma buffer */ + + u32 pnext; /* paddr of next hpc_dma_desc if any */ +}; + +/* The set of regs for each HPC3 PBUS DMA channel. */ +struct hpc3_pbus_dmacregs { + volatile u32 pbdma_bptr; /* pbus dma channel buffer ptr */ + volatile u32 pbdma_dptr; /* pbus dma channel desc ptr */ + u32 _unused0[0x1000/4 - 2]; /* padding */ + volatile u32 pbdma_ctrl; /* pbus dma channel control register has + * copletely different meaning for read + * compared with write */ + /* read */ +#define HPC3_PDMACTRL_INT 0x00000001 /* interrupt (cleared after read) */ +#define HPC3_PDMACTRL_ISACT 0x00000002 /* channel active */ + /* write */ +#define HPC3_PDMACTRL_SEL 0x00000002 /* little endian transfer */ +#define HPC3_PDMACTRL_RCV 0x00000004 /* direction is receive */ +#define HPC3_PDMACTRL_FLSH 0x00000008 /* enable flush for receive DMA */ +#define HPC3_PDMACTRL_ACT 0x00000010 /* start dma transfer */ +#define HPC3_PDMACTRL_LD 0x00000020 /* load enable for ACT */ +#define HPC3_PDMACTRL_RT 0x00000040 /* Use realtime GIO bus servicing */ +#define HPC3_PDMACTRL_HW 0x0000ff00 /* DMA High-water mark */ +#define HPC3_PDMACTRL_FB 0x003f0000 /* Ptr to beginning of fifo */ +#define HPC3_PDMACTRL_FE 0x3f000000 /* Ptr to end of fifo */ + + u32 _unused1[0x1000/4 - 1]; /* padding */ +}; + +/* The HPC3 SCSI registers, this does not include external ones. */ +struct hpc3_scsiregs { + volatile u32 cbptr; /* current dma buffer ptr, diagnostic use only */ + volatile u32 ndptr; /* next dma descriptor ptr */ + u32 _unused0[0x1000/4 - 2]; /* padding */ + volatile u32 bcd; /* byte count info */ +#define HPC3_SBCD_BCNTMSK 0x00003fff /* bytes to transfer from/to memory */ +#define HPC3_SBCD_XIE 0x00004000 /* Send IRQ when done with cur buf */ +#define HPC3_SBCD_EOX 0x00008000 /* Indicates this is last buf in chain */ + + volatile u32 ctrl; /* control register */ +#define HPC3_SCTRL_IRQ 0x01 /* IRQ asserted, either dma done or parity */ +#define HPC3_SCTRL_ENDIAN 0x02 /* DMA endian mode, 0=big 1=little */ +#define HPC3_SCTRL_DIR 0x04 /* DMA direction, 1=dev2mem 0=mem2dev */ +#define HPC3_SCTRL_FLUSH 0x08 /* Tells HPC3 to flush scsi fifos */ +#define HPC3_SCTRL_ACTIVE 0x10 /* SCSI DMA channel is active */ +#define HPC3_SCTRL_AMASK 0x20 /* DMA active inhibits PIO */ +#define HPC3_SCTRL_CRESET 0x40 /* Resets dma channel and external controller */ +#define HPC3_SCTRL_PERR 0x80 /* Bad parity on HPC3 iface to scsi controller */ + + volatile u32 gfptr; /* current GIO fifo ptr */ + volatile u32 dfptr; /* current device fifo ptr */ + volatile u32 dconfig; /* DMA configuration register */ +#define HPC3_SDCFG_HCLK 0x00001 /* Enable DMA half clock mode */ +#define HPC3_SDCFG_D1 0x00006 /* Cycles to spend in D1 state */ +#define HPC3_SDCFG_D2 0x00038 /* Cycles to spend in D2 state */ +#define HPC3_SDCFG_D3 0x001c0 /* Cycles to spend in D3 state */ +#define HPC3_SDCFG_HWAT 0x00e00 /* DMA high water mark */ +#define HPC3_SDCFG_HW 0x01000 /* Enable 16-bit halfword DMA accesses to scsi */ +#define HPC3_SDCFG_SWAP 0x02000 /* Byte swap all DMA accesses */ +#define HPC3_SDCFG_EPAR 0x04000 /* Enable parity checking for DMA */ +#define HPC3_SDCFG_POLL 0x08000 /* hd_dreq polarity control */ +#define HPC3_SDCFG_ERLY 0x30000 /* hd_dreq behavior control bits */ + + volatile u32 pconfig; /* PIO configuration register */ +#define HPC3_SPCFG_P3 0x0003 /* Cycles to spend in P3 state */ +#define HPC3_SPCFG_P2W 0x001c /* Cycles to spend in P2 state for writes */ +#define HPC3_SPCFG_P2R 0x01e0 /* Cycles to spend in P2 state for reads */ +#define HPC3_SPCFG_P1 0x0e00 /* Cycles to spend in P1 state */ +#define HPC3_SPCFG_HW 0x1000 /* Enable 16-bit halfword PIO accesses to scsi */ +#define HPC3_SPCFG_SWAP 0x2000 /* Byte swap all PIO accesses */ +#define HPC3_SPCFG_EPAR 0x4000 /* Enable parity checking for PIO */ +#define HPC3_SPCFG_FUJI 0x8000 /* Fujitsu scsi controller mode for faster dma/pio */ + + u32 _unused1[0x1000/4 - 6]; /* padding */ +}; + +/* SEEQ ethernet HPC3 registers, only one seeq per HPC3. */ +struct hpc3_ethregs { + /* Receiver registers. */ + volatile u32 rx_cbptr; /* current dma buffer ptr, diagnostic use only */ + volatile u32 rx_ndptr; /* next dma descriptor ptr */ + u32 _unused0[0x1000/4 - 2]; /* padding */ + volatile u32 rx_bcd; /* byte count info */ +#define HPC3_ERXBCD_BCNTMSK 0x00003fff /* bytes to be sent to memory */ +#define HPC3_ERXBCD_XIE 0x20000000 /* HPC3 interrupts cpu at end of this buf */ +#define HPC3_ERXBCD_EOX 0x80000000 /* flags this as end of descriptor chain */ + + volatile u32 rx_ctrl; /* control register */ +#define HPC3_ERXCTRL_STAT50 0x0000003f /* Receive status reg bits of Seeq8003 */ +#define HPC3_ERXCTRL_STAT6 0x00000040 /* Rdonly irq status */ +#define HPC3_ERXCTRL_STAT7 0x00000080 /* Rdonlt old/new status bit from Seeq */ +#define HPC3_ERXCTRL_ENDIAN 0x00000100 /* Endian for dma channel, little=1 big=0 */ +#define HPC3_ERXCTRL_ACTIVE 0x00000200 /* Tells if DMA transfer is in progress */ +#define HPC3_ERXCTRL_AMASK 0x00000400 /* Tells if ACTIVE inhibits PIO's to hpc3 */ +#define HPC3_ERXCTRL_RBO 0x00000800 /* Receive buffer overflow if set to 1 */ + + volatile u32 rx_gfptr; /* current GIO fifo ptr */ + volatile u32 rx_dfptr; /* current device fifo ptr */ + u32 _unused1; /* padding */ + volatile u32 reset; /* reset register */ +#define HPC3_ERST_CRESET 0x1 /* Reset dma channel and external controller */ +#define HPC3_ERST_CLRIRQ 0x2 /* Clear channel interrupt */ +#define HPC3_ERST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */ + + volatile u32 dconfig; /* DMA configuration register */ +#define HPC3_EDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */ +#define HPC3_EDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */ +#define HPC3_EDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */ +#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */ +#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */ +#define HPC3_EDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */ +#define HPC3_EDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */ +#define HPC3_EDCFG_PTO 0x30000 /* Programmed timeout value for above two */ + + volatile u32 pconfig; /* PIO configuration register */ +#define HPC3_EPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */ +#define HPC3_EPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */ +#define HPC3_EPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */ +#define HPC3_EPCFG_TST 0x1000 /* Diagnistic ram test feature bit */ + + u32 _unused2[0x1000/4 - 8]; /* padding */ + + /* Transmitter registers. */ + volatile u32 tx_cbptr; /* current dma buffer ptr, diagnostic use only */ + volatile u32 tx_ndptr; /* next dma descriptor ptr */ + u32 _unused3[0x1000/4 - 2]; /* padding */ + volatile u32 tx_bcd; /* byte count info */ +#define HPC3_ETXBCD_BCNTMSK 0x00003fff /* bytes to be read from memory */ +#define HPC3_ETXBCD_ESAMP 0x10000000 /* if set, too late to add descriptor */ +#define HPC3_ETXBCD_XIE 0x20000000 /* Interrupt cpu at end of cur desc */ +#define HPC3_ETXBCD_EOP 0x40000000 /* Last byte of cur buf is end of packet */ +#define HPC3_ETXBCD_EOX 0x80000000 /* This buf is the end of desc chain */ + + volatile u32 tx_ctrl; /* control register */ +#define HPC3_ETXCTRL_STAT30 0x0000000f /* Rdonly copy of seeq tx stat reg */ +#define HPC3_ETXCTRL_STAT4 0x00000010 /* Indicate late collision occurred */ +#define HPC3_ETXCTRL_STAT75 0x000000e0 /* Rdonly irq status from seeq */ +#define HPC3_ETXCTRL_ENDIAN 0x00000100 /* DMA channel endian mode, 1=little 0=big */ +#define HPC3_ETXCTRL_ACTIVE 0x00000200 /* DMA tx channel is active */ +#define HPC3_ETXCTRL_AMASK 0x00000400 /* Indicates ACTIVE inhibits PIO's */ + + volatile u32 tx_gfptr; /* current GIO fifo ptr */ + volatile u32 tx_dfptr; /* current device fifo ptr */ + u32 _unused4[0x1000/4 - 4]; /* padding */ +}; + +struct hpc3_regs { + /* First regs for the PBUS 8 dma channels. */ + struct hpc3_pbus_dmacregs pbdma[8]; + + /* Now the HPC scsi registers, we get two scsi reg sets. */ + struct hpc3_scsiregs scsi_chan0, scsi_chan1; + + /* The SEEQ hpc3 ethernet dma/control registers. */ + struct hpc3_ethregs ethregs; + + /* Here are where the hpc3 fifo's can be directly accessed + * via PIO accesses. Under normal operation we never stick + * our grubby paws in here so it's just padding. */ + u32 _unused0[0x18000/4]; + + /* HPC3 irq status regs. Due to a peculiar bug you need to + * look at two different register addresses to get at all of + * the status bits. The first reg can only reliably report + * bits 4:0 of the status, and the second reg can only + * reliably report bits 9:5 of the hpc3 irq status. I told + * you it was a peculiar bug. ;-) + */ + volatile u32 istat0; /* Irq status, only bits <4:0> reliable. */ +#define HPC3_ISTAT_PBIMASK 0x0ff /* irq bits for pbus devs 0 --> 7 */ +#define HPC3_ISTAT_SC0MASK 0x100 /* irq bit for scsi channel 0 */ +#define HPC3_ISTAT_SC1MASK 0x200 /* irq bit for scsi channel 1 */ + + volatile u32 gio_misc; /* GIO misc control bits. */ +#define HPC3_GIOMISC_ERTIME 0x1 /* Enable external timer real time. */ +#define HPC3_GIOMISC_DENDIAN 0x2 /* dma descriptor endian, 1=lit 0=big */ + + u32 eeprom; /* EEPROM data reg. */ +#define HPC3_EEPROM_EPROT 0x01 /* Protect register enable */ +#define HPC3_EEPROM_CSEL 0x02 /* Chip select */ +#define HPC3_EEPROM_ECLK 0x04 /* EEPROM clock */ +#define HPC3_EEPROM_DATO 0x08 /* Data out */ +#define HPC3_EEPROM_DATI 0x10 /* Data in */ + + volatile u32 istat1; /* Irq status, only bits <9:5> reliable. */ + volatile u32 bestat; /* Bus error interrupt status reg. */ +#define HPC3_BESTAT_BLMASK 0x000ff /* Bus lane where bad parity occurred */ +#define HPC3_BESTAT_CTYPE 0x00100 /* Bus cycle type, 0=PIO 1=DMA */ +#define HPC3_BESTAT_PIDSHIFT 9 +#define HPC3_BESTAT_PIDMASK 0x3f700 /* DMA channel parity identifier */ + + u32 _unused1[0x14000/4 - 5]; /* padding */ + + /* Now direct PIO per-HPC3 peripheral access to external regs. */ + volatile u32 scsi0_ext[256]; /* SCSI channel 0 external regs */ + u32 _unused2[0x7c00/4]; + volatile u32 scsi1_ext[256]; /* SCSI channel 1 external regs */ + u32 _unused3[0x7c00/4]; + volatile u32 eth_ext[320]; /* Ethernet external registers */ + u32 _unused4[0x3b00/4]; + + /* Per-peripheral device external registers and DMA/PIO control. */ + volatile u32 pbus_extregs[16][256]; + volatile u32 pbus_dmacfg[8][128]; + /* Cycles to spend in D3 for reads */ +#define HPC3_DMACFG_D3R_MASK 0x00000001 +#define HPC3_DMACFG_D3R_SHIFT 0 + /* Cycles to spend in D4 for reads */ +#define HPC3_DMACFG_D4R_MASK 0x0000001e +#define HPC3_DMACFG_D4R_SHIFT 1 + /* Cycles to spend in D5 for reads */ +#define HPC3_DMACFG_D5R_MASK 0x000001e0 +#define HPC3_DMACFG_D5R_SHIFT 5 + /* Cycles to spend in D3 for writes */ +#define HPC3_DMACFG_D3W_MASK 0x00000200 +#define HPC3_DMACFG_D3W_SHIFT 9 + /* Cycles to spend in D4 for writes */ +#define HPC3_DMACFG_D4W_MASK 0x00003c00 +#define HPC3_DMACFG_D4W_SHIFT 10 + /* Cycles to spend in D5 for writes */ +#define HPC3_DMACFG_D5W_MASK 0x0003c000 +#define HPC3_DMACFG_D5W_SHIFT 14 + /* Enable 16-bit DMA access mode */ +#define HPC3_DMACFG_DS16 0x00040000 + /* Places halfwords on high 16 bits of bus */ +#define HPC3_DMACFG_EVENHI 0x00080000 + /* Make this device real time */ +#define HPC3_DMACFG_RTIME 0x00200000 + /* 5 bit burst count for DMA device */ +#define HPC3_DMACFG_BURST_MASK 0x07c00000 +#define HPC3_DMACFG_BURST_SHIFT 22 + /* Use live pbus_dreq unsynchronized signal */ +#define HPC3_DMACFG_DRQLIVE 0x08000000 + volatile u32 pbus_piocfg[16][64]; + /* Cycles to spend in P2 state for reads */ +#define HPC3_PIOCFG_P2R_MASK 0x00001 +#define HPC3_PIOCFG_P2R_SHIFT 0 + /* Cycles to spend in P3 state for reads */ +#define HPC3_PIOCFG_P3R_MASK 0x0001e +#define HPC3_PIOCFG_P3R_SHIFT 1 + /* Cycles to spend in P4 state for reads */ +#define HPC3_PIOCFG_P4R_MASK 0x001e0 +#define HPC3_PIOCFG_P4R_SHIFT 5 + /* Cycles to spend in P2 state for writes */ +#define HPC3_PIOCFG_P2W_MASK 0x00200 +#define HPC3_PIOCFG_P2W_SHIFT 9 + /* Cycles to spend in P3 state for writes */ +#define HPC3_PIOCFG_P3W_MASK 0x03c00 +#define HPC3_PIOCFG_P3W_SHIFT 10 + /* Cycles to spend in P4 state for writes */ +#define HPC3_PIOCFG_P4W_MASK 0x3c000 +#define HPC3_PIOCFG_P4W_SHIFT 14 + /* Enable 16-bit PIO accesses */ +#define HPC3_PIOCFG_DS16 0x40000 + /* Place even address bits in bits <15:8> */ +#define HPC3_PIOCFG_EVENHI 0x80000 + + /* PBUS PROM control regs. */ + volatile u32 pbus_promwe; /* PROM write enable register */ +#define HPC3_PROM_WENAB 0x1 /* Enable writes to the PROM */ + + u32 _unused5[0x0800/4 - 1]; + volatile u32 pbus_promswap; /* Chip select swap reg */ +#define HPC3_PROM_SWAP 0x1 /* invert GIO addr bit to select prom0 or prom1 */ + + u32 _unused6[0x0800/4 - 1]; + volatile u32 pbus_gout; /* PROM general purpose output reg */ +#define HPC3_PROM_STAT 0x1 /* General purpose status bit in gout */ + + u32 _unused7[0x1000/4 - 1]; + volatile u32 rtcregs[14]; /* Dallas clock registers */ + u32 _unused8[50]; + volatile u32 bbram[8192-50-14]; /* Battery backed ram */ +}; + +/* + * It is possible to have two HPC3's within the address space on + * one machine, though only having one is more likely on an Indy. + */ +extern struct hpc3_regs *hpc3c0, *hpc3c1; +#define HPC3_CHIP0_BASE 0x1fb80000 /* physical */ +#define HPC3_CHIP1_BASE 0x1fb00000 /* physical */ + +extern void sgihpc_init(void); + +#endif /* _SGI_HPC3_H */ diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h new file mode 100644 index 000000000000..343ed15f8dc4 --- /dev/null +++ b/arch/mips/include/asm/sgi/ioc.h @@ -0,0 +1,200 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * ioc.h: Definitions for SGI I/O Controller + * + * Copyright (C) 1996 David S. Miller + * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle + * Copyright (C) 2001, 2003 Ladislav Michl + */ + +#ifndef _SGI_IOC_H +#define _SGI_IOC_H + +#include <linux/types.h> +#include <asm/sgi/pi1.h> + +/* + * All registers are 8-bit wide alligned on 32-bit boundary. Bad things + * happen if you try word access them. You have been warned. + */ + +struct sgioc_uart_regs { + u8 _ctrl1[3]; + volatile u8 ctrl1; + u8 _data1[3]; + volatile u8 data1; + u8 _ctrl2[3]; + volatile u8 ctrl2; + u8 _data2[3]; + volatile u8 data2; +}; + +struct sgioc_keyb_regs { + u8 _data[3]; + volatile u8 data; + u8 _command[3]; + volatile u8 command; +}; + +struct sgint_regs { + u8 _istat0[3]; + volatile u8 istat0; /* Interrupt status zero */ +#define SGINT_ISTAT0_FFULL 0x01 +#define SGINT_ISTAT0_SCSI0 0x02 +#define SGINT_ISTAT0_SCSI1 0x04 +#define SGINT_ISTAT0_ENET 0x08 +#define SGINT_ISTAT0_GFXDMA 0x10 +#define SGINT_ISTAT0_PPORT 0x20 +#define SGINT_ISTAT0_HPC2 0x40 +#define SGINT_ISTAT0_LIO2 0x80 + u8 _imask0[3]; + volatile u8 imask0; /* Interrupt mask zero */ + u8 _istat1[3]; + volatile u8 istat1; /* Interrupt status one */ +#define SGINT_ISTAT1_ISDNI 0x01 +#define SGINT_ISTAT1_PWR 0x02 +#define SGINT_ISTAT1_ISDNH 0x04 +#define SGINT_ISTAT1_LIO3 0x08 +#define SGINT_ISTAT1_HPC3 0x10 +#define SGINT_ISTAT1_AFAIL 0x20 +#define SGINT_ISTAT1_VIDEO 0x40 +#define SGINT_ISTAT1_GIO2 0x80 + u8 _imask1[3]; + volatile u8 imask1; /* Interrupt mask one */ + u8 _vmeistat[3]; + volatile u8 vmeistat; /* VME interrupt status */ + u8 _cmeimask0[3]; + volatile u8 cmeimask0; /* VME interrupt mask zero */ + u8 _cmeimask1[3]; + volatile u8 cmeimask1; /* VME interrupt mask one */ + u8 _cmepol[3]; + volatile u8 cmepol; /* VME polarity */ + u8 _tclear[3]; + volatile u8 tclear; + u8 _errstat[3]; + volatile u8 errstat; /* Error status reg, reserved on INT2 */ + u32 _unused0[2]; + u8 _tcnt0[3]; + volatile u8 tcnt0; /* counter 0 */ + u8 _tcnt1[3]; + volatile u8 tcnt1; /* counter 1 */ + u8 _tcnt2[3]; + volatile u8 tcnt2; /* counter 2 */ + u8 _tcword[3]; + volatile u8 tcword; /* control word */ +#define SGINT_TCWORD_BCD 0x01 /* Use BCD mode for counters */ +#define SGINT_TCWORD_MMASK 0x0e /* Mode bitmask. */ +#define SGINT_TCWORD_MITC 0x00 /* IRQ on terminal count (doesn't work) */ +#define SGINT_TCWORD_MOS 0x02 /* One-shot IRQ mode. */ +#define SGINT_TCWORD_MRGEN 0x04 /* Normal rate generation */ +#define SGINT_TCWORD_MSWGEN 0x06 /* Square wave generator mode */ +#define SGINT_TCWORD_MSWST 0x08 /* Software strobe */ +#define SGINT_TCWORD_MHWST 0x0a /* Hardware strobe */ +#define SGINT_TCWORD_CMASK 0x30 /* Command mask */ +#define SGINT_TCWORD_CLAT 0x00 /* Latch command */ +#define SGINT_TCWORD_CLSB 0x10 /* LSB read/write */ +#define SGINT_TCWORD_CMSB 0x20 /* MSB read/write */ +#define SGINT_TCWORD_CALL 0x30 /* Full counter read/write */ +#define SGINT_TCWORD_CNT0 0x00 /* Select counter zero */ +#define SGINT_TCWORD_CNT1 0x40 /* Select counter one */ +#define SGINT_TCWORD_CNT2 0x80 /* Select counter two */ +#define SGINT_TCWORD_CRBCK 0xc0 /* Readback command */ +}; + +/* + * The timer is the good old 8254. Unlike in PCs it's clocked at exactly 1MHz + */ +#define SGINT_TIMER_CLOCK 1000000 + +/* + * This is the constant we're using for calibrating the counter. + */ +#define SGINT_TCSAMP_COUNTER ((SGINT_TIMER_CLOCK / HZ) + 255) + +/* We need software copies of these because they are write only. */ +extern u8 sgi_ioc_reset, sgi_ioc_write; + +struct sgioc_regs { + struct pi1_regs pport; + u32 _unused0[2]; + struct sgioc_uart_regs uart; + struct sgioc_keyb_regs kbdmouse; + u8 _gcsel[3]; + volatile u8 gcsel; + u8 _genctrl[3]; + volatile u8 genctrl; + u8 _panel[3]; + volatile u8 panel; +#define SGIOC_PANEL_POWERON 0x01 +#define SGIOC_PANEL_POWERINTR 0x02 +#define SGIOC_PANEL_VOLDNINTR 0x10 +#define SGIOC_PANEL_VOLDNHOLD 0x20 +#define SGIOC_PANEL_VOLUPINTR 0x40 +#define SGIOC_PANEL_VOLUPHOLD 0x80 + u32 _unused1; + u8 _sysid[3]; + volatile u8 sysid; +#define SGIOC_SYSID_FULLHOUSE 0x01 +#define SGIOC_SYSID_BOARDREV(x) (((x) & 0x1e) >> 1) +#define SGIOC_SYSID_CHIPREV(x) (((x) & 0xe0) >> 5) + u32 _unused2; + u8 _read[3]; + volatile u8 read; + u32 _unused3; + u8 _dmasel[3]; + volatile u8 dmasel; +#define SGIOC_DMASEL_SCLK10MHZ 0x00 /* use 10MHZ serial clock */ +#define SGIOC_DMASEL_ISDNB 0x01 /* enable isdn B */ +#define SGIOC_DMASEL_ISDNA 0x02 /* enable isdn A */ +#define SGIOC_DMASEL_PPORT 0x04 /* use parallel DMA */ +#define SGIOC_DMASEL_SCLK667MHZ 0x10 /* use 6.67MHZ serial clock */ +#define SGIOC_DMASEL_SCLKEXT 0x20 /* use external serial clock */ + u32 _unused4; + u8 _reset[3]; + volatile u8 reset; +#define SGIOC_RESET_PPORT 0x01 /* 0=parport reset, 1=nornal */ +#define SGIOC_RESET_KBDMOUSE 0x02 /* 0=kbdmouse reset, 1=normal */ +#define SGIOC_RESET_EISA 0x04 /* 0=eisa reset, 1=normal */ +#define SGIOC_RESET_ISDN 0x08 /* 0=isdn reset, 1=normal */ +#define SGIOC_RESET_LC0OFF 0x10 /* guiness: turn led off (red, else green) */ +#define SGIOC_RESET_LC1OFF 0x20 /* guiness: turn led off (green, else amber) */ + u32 _unused5; + u8 _write[3]; + volatile u8 write; +#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshhold */ +#define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */ +#define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */ +#define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */ +#define SGIOC_WRITE_U1AMODE 0x10 /* 1=PC 0=MAC UART mode */ +#define SGIOC_WRITE_U0AMODE 0x20 /* 1=PC 0=MAC UART mode */ +#define SGIOC_WRITE_MLO 0x40 /* 1=4.75V 0=+5V */ +#define SGIOC_WRITE_MHI 0x80 /* 1=5.25V 0=+5V */ + u32 _unused6; + struct sgint_regs int3; + u32 _unused7[16]; + volatile u32 extio; /* FullHouse only */ +#define EXTIO_S0_IRQ_3 0x8000 /* S0: vid.vsync */ +#define EXTIO_S0_IRQ_2 0x4000 /* S0: gfx.fifofull */ +#define EXTIO_S0_IRQ_1 0x2000 /* S0: gfx.int */ +#define EXTIO_S0_RETRACE 0x1000 +#define EXTIO_SG_IRQ_3 0x0800 /* SG: vid.vsync */ +#define EXTIO_SG_IRQ_2 0x0400 /* SG: gfx.fifofull */ +#define EXTIO_SG_IRQ_1 0x0200 /* SG: gfx.int */ +#define EXTIO_SG_RETRACE 0x0100 +#define EXTIO_GIO_33MHZ 0x0080 +#define EXTIO_EISA_BUSERR 0x0040 +#define EXTIO_MC_BUSERR 0x0020 +#define EXTIO_HPC3_BUSERR 0x0010 +#define EXTIO_S0_STAT_1 0x0008 +#define EXTIO_S0_STAT_0 0x0004 +#define EXTIO_SG_STAT_1 0x0002 +#define EXTIO_SG_STAT_0 0x0001 +}; + +extern struct sgioc_regs *sgioc; +extern struct sgint_regs *sgint; + +#endif diff --git a/arch/mips/include/asm/sgi/ip22.h b/arch/mips/include/asm/sgi/ip22.h new file mode 100644 index 000000000000..c0501f91719b --- /dev/null +++ b/arch/mips/include/asm/sgi/ip22.h @@ -0,0 +1,78 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * ip22.h: Definitions for SGI IP22 machines + * + * Copyright (C) 1996 David S. Miller + * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle + */ + +#ifndef _SGI_IP22_H +#define _SGI_IP22_H + +/* + * These are the virtual IRQ numbers, we divide all IRQ's into + * 'spaces', the 'space' determines where and how to enable/disable + * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrupts + * are not supported this way. Driver is supposed to allocate HPC/MC + * interrupt as shareable and then look to proper status bit (see + * HAL2 driver). This will prevent many complications, trust me ;-) + */ + +#include <irq.h> +#include <asm/sgi/ioc.h> + +#define SGINT_EISA 0 /* 16 EISA irq levels (Indigo2) */ +#define SGINT_CPU MIPS_CPU_IRQ_BASE /* MIPS CPU define 8 interrupt sources */ +#define SGINT_LOCAL0 (SGINT_CPU+8) /* 8 local0 irq levels */ +#define SGINT_LOCAL1 (SGINT_CPU+16) /* 8 local1 irq levels */ +#define SGINT_LOCAL2 (SGINT_CPU+24) /* 8 local2 vectored irq levels */ +#define SGINT_LOCAL3 (SGINT_CPU+32) /* 8 local3 vectored irq levels */ +#define SGINT_END (SGINT_CPU+40) /* End of 'spaces' */ + +/* + * Individual interrupt definitions for the Indy and Indigo2 + */ + +#define SGI_SOFT_0_IRQ SGINT_CPU + 0 +#define SGI_SOFT_1_IRQ SGINT_CPU + 1 +#define SGI_LOCAL_0_IRQ SGINT_CPU + 2 +#define SGI_LOCAL_1_IRQ SGINT_CPU + 3 +#define SGI_8254_0_IRQ SGINT_CPU + 4 +#define SGI_8254_1_IRQ SGINT_CPU + 5 +#define SGI_BUSERR_IRQ SGINT_CPU + 6 +#define SGI_TIMER_IRQ SGINT_CPU + 7 + +#define SGI_FIFO_IRQ SGINT_LOCAL0 + 0 /* FIFO full */ +#define SGI_GIO_0_IRQ SGI_FIFO_IRQ /* GIO-0 */ +#define SGI_WD93_0_IRQ SGINT_LOCAL0 + 1 /* 1st onboard WD93 */ +#define SGI_WD93_1_IRQ SGINT_LOCAL0 + 2 /* 2nd onboard WD93 */ +#define SGI_ENET_IRQ SGINT_LOCAL0 + 3 /* onboard ethernet */ +#define SGI_MCDMA_IRQ SGINT_LOCAL0 + 4 /* MC DMA done */ +#define SGI_PARPORT_IRQ SGINT_LOCAL0 + 5 /* Parallel port */ +#define SGI_GIO_1_IRQ SGINT_LOCAL0 + 6 /* GE / GIO-1 / 2nd-HPC */ +#define SGI_MAP_0_IRQ SGINT_LOCAL0 + 7 /* Mappable interrupt 0 */ + +#define SGI_GPL0_IRQ SGINT_LOCAL1 + 0 /* General Purpose LOCAL1_N<0> */ +#define SGI_PANEL_IRQ SGINT_LOCAL1 + 1 /* front panel */ +#define SGI_GPL2_IRQ SGINT_LOCAL1 + 2 /* General Purpose LOCAL1_N<2> */ +#define SGI_MAP_1_IRQ SGINT_LOCAL1 + 3 /* Mappable interrupt 1 */ +#define SGI_HPCDMA_IRQ SGINT_LOCAL1 + 4 /* HPC DMA done */ +#define SGI_ACFAIL_IRQ SGINT_LOCAL1 + 5 /* AC fail */ +#define SGI_VINO_IRQ SGINT_LOCAL1 + 6 /* Indy VINO */ +#define SGI_GIO_2_IRQ SGINT_LOCAL1 + 7 /* Vert retrace / GIO-2 */ + +/* Mapped interrupts. These interrupts may be mapped to either 0, or 1 */ +#define SGI_VERT_IRQ SGINT_LOCAL2 + 0 /* INT3: newport vertical status */ +#define SGI_EISA_IRQ SGINT_LOCAL2 + 3 /* EISA interrupts */ +#define SGI_KEYBD_IRQ SGINT_LOCAL2 + 4 /* keyboard */ +#define SGI_SERIAL_IRQ SGINT_LOCAL2 + 5 /* onboard serial */ + +#define ip22_is_fullhouse() (sgioc->sysid & SGIOC_SYSID_FULLHOUSE) + +extern unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg); +extern unsigned short ip22_nvram_read(int reg); + +#endif diff --git a/arch/mips/include/asm/sgi/mc.h b/arch/mips/include/asm/sgi/mc.h new file mode 100644 index 000000000000..1576c2394de8 --- /dev/null +++ b/arch/mips/include/asm/sgi/mc.h @@ -0,0 +1,231 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * mc.h: Definitions for SGI Memory Controller + * + * Copyright (C) 1996 David S. Miller + * Copyright (C) 1999 Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ + +#ifndef _SGI_MC_H +#define _SGI_MC_H + +struct sgimc_regs { + u32 _unused0; + volatile u32 cpuctrl0; /* CPU control register 0, readwrite */ +#define SGIMC_CCTRL0_REFS 0x0000000f /* REFS mask */ +#define SGIMC_CCTRL0_EREFRESH 0x00000010 /* Memory refresh enable */ +#define SGIMC_CCTRL0_EPERRGIO 0x00000020 /* GIO parity error enable */ +#define SGIMC_CCTRL0_EPERRMEM 0x00000040 /* Main mem parity error enable */ +#define SGIMC_CCTRL0_EPERRCPU 0x00000080 /* CPU bus parity error enable */ +#define SGIMC_CCTRL0_WDOG 0x00000100 /* Watchdog timer enable */ +#define SGIMC_CCTRL0_SYSINIT 0x00000200 /* System init bit */ +#define SGIMC_CCTRL0_GFXRESET 0x00000400 /* Graphics interface reset */ +#define SGIMC_CCTRL0_EISALOCK 0x00000800 /* Lock CPU from memory for EISA */ +#define SGIMC_CCTRL0_EPERRSCMD 0x00001000 /* SysCMD bus parity error enable */ +#define SGIMC_CCTRL0_IENAB 0x00002000 /* Allow interrupts from MC */ +#define SGIMC_CCTRL0_ESNOOP 0x00004000 /* Snooping I/O enable */ +#define SGIMC_CCTRL0_EPROMWR 0x00008000 /* Prom writes from cpu enable */ +#define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */ +#define SGIMC_CCTRL0_LENDIAN 0x00020000 /* Put MC in little-endian mode */ +#define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */ +#define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */ +#define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */ +#define SGIMC_CCTRL0_GIOBTOB 0x08000000 /* Allow GIO back to back writes */ + u32 _unused1; + volatile u32 cpuctrl1; /* CPU control register 1, readwrite */ +#define SGIMC_CCTRL1_EGIOTIMEO 0x00000010 /* GIO bus timeout enable */ +#define SGIMC_CCTRL1_FIXEDEHPC 0x00001000 /* Fixed HPC endianness */ +#define SGIMC_CCTRL1_LITTLEHPC 0x00002000 /* Little endian HPC */ +#define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */ +#define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */ +#define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */ +#define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */ + + u32 _unused2; + volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */ + + u32 _unused3; + volatile u32 systemid; /* MC system ID register, readonly */ +#define SGIMC_SYSID_MASKREV 0x0000000f /* Revision of MC controller */ +#define SGIMC_SYSID_EPRESENT 0x00000010 /* Indicates presence of EISA bus */ + + u32 _unused4[3]; + volatile u32 divider; /* Divider reg for RPSS */ + + u32 _unused5; + u32 eeprom; /* EEPROM byte reg for r4k */ +#define SGIMC_EEPROM_PRE 0x00000001 /* eeprom chip PRE pin assertion */ +#define SGIMC_EEPROM_CSEL 0x00000002 /* Active high, eeprom chip select */ +#define SGIMC_EEPROM_SECLOCK 0x00000004 /* EEPROM serial clock */ +#define SGIMC_EEPROM_SDATAO 0x00000008 /* Serial EEPROM data-out */ +#define SGIMC_EEPROM_SDATAI 0x00000010 /* Serial EEPROM data-in */ + + u32 _unused6[3]; + volatile u32 rcntpre; /* Preload refresh counter */ + + u32 _unused7; + volatile u32 rcounter; /* Readonly refresh counter */ + + u32 _unused8[13]; + volatile u32 giopar; /* Parameter word for GIO64 */ +#define SGIMC_GIOPAR_HPC64 0x00000001 /* HPC talks to GIO using 64-bits */ +#define SGIMC_GIOPAR_GFX64 0x00000002 /* GFX talks to GIO using 64-bits */ +#define SGIMC_GIOPAR_EXP064 0x00000004 /* EXP(slot0) talks using 64-bits */ +#define SGIMC_GIOPAR_EXP164 0x00000008 /* EXP(slot1) talks using 64-bits */ +#define SGIMC_GIOPAR_EISA64 0x00000010 /* EISA bus talks 64-bits to GIO */ +#define SGIMC_GIOPAR_HPC264 0x00000020 /* 2nd HPX talks 64-bits to GIO */ +#define SGIMC_GIOPAR_RTIMEGFX 0x00000040 /* GFX device has realtime attr */ +#define SGIMC_GIOPAR_RTIMEEXP0 0x00000080 /* EXP(slot0) has realtime attr */ +#define SGIMC_GIOPAR_RTIMEEXP1 0x00000100 /* EXP(slot1) has realtime attr */ +#define SGIMC_GIOPAR_MASTEREISA 0x00000200 /* EISA bus can act as bus master */ +#define SGIMC_GIOPAR_ONEBUS 0x00000400 /* Exists one GIO64 pipelined bus */ +#define SGIMC_GIOPAR_MASTERGFX 0x00000800 /* GFX can act as a bus master */ +#define SGIMC_GIOPAR_MASTEREXP0 0x00001000 /* EXP(slot0) can bus master */ +#define SGIMC_GIOPAR_MASTEREXP1 0x00002000 /* EXP(slot1) can bus master */ +#define SGIMC_GIOPAR_PLINEEXP0 0x00004000 /* EXP(slot0) has pipeline attr */ +#define SGIMC_GIOPAR_PLINEEXP1 0x00008000 /* EXP(slot1) has pipeline attr */ + + u32 _unused9; + volatile u32 cputp; /* CPU bus arb time period */ + + u32 _unused10[3]; + volatile u32 lbursttp; /* Time period for long bursts */ + + /* MC chip can drive up to 4 bank 4 SIMMs each. All SIMMs in bank must + * be the same size. The size encoding for supported SIMMs is bellow */ + u32 _unused11[9]; + volatile u32 mconfig0; /* Memory config register zero */ + u32 _unused12; + volatile u32 mconfig1; /* Memory config register one */ +#define SGIMC_MCONFIG_BASEADDR 0x000000ff /* Base address of bank*/ +#define SGIMC_MCONFIG_RMASK 0x00001f00 /* Ram config bitmask */ +#define SGIMC_MCONFIG_BVALID 0x00002000 /* Bank is valid */ +#define SGIMC_MCONFIG_SBANKS 0x00004000 /* Number of subbanks */ + + u32 _unused13; + volatile u32 cmacc; /* Mem access config for CPU */ + u32 _unused14; + volatile u32 gmacc; /* Mem access config for GIO */ + + /* This define applies to both cmacc and gmacc registers above. */ +#define SGIMC_MACC_ALIASBIG 0x20000000 /* 512MB home for alias */ + + /* Error address/status regs from GIO and CPU perspectives. */ + u32 _unused15; + volatile u32 cerr; /* Error address reg for CPU */ + u32 _unused16; + volatile u32 cstat; /* Status reg for CPU */ +#define SGIMC_CSTAT_RD 0x00000100 /* read parity error */ +#define SGIMC_CSTAT_PAR 0x00000200 /* CPU parity error */ +#define SGIMC_CSTAT_ADDR 0x00000400 /* memory bus error bad addr */ +#define SGIMC_CSTAT_SYSAD_PAR 0x00000800 /* sysad parity error */ +#define SGIMC_CSTAT_SYSCMD_PAR 0x00001000 /* syscmd parity error */ +#define SGIMC_CSTAT_BAD_DATA 0x00002000 /* bad data identifier */ +#define SGIMC_CSTAT_PAR_MASK 0x00001f00 /* parity error mask */ +#define SGIMC_CSTAT_RD_PAR (SGIMC_CSTAT_RD | SGIMC_CSTAT_PAR) + + u32 _unused17; + volatile u32 gerr; /* Error address reg for GIO */ + u32 _unused18; + volatile u32 gstat; /* Status reg for GIO */ +#define SGIMC_GSTAT_RD 0x00000100 /* read parity error */ +#define SGIMC_GSTAT_WR 0x00000200 /* write parity error */ +#define SGIMC_GSTAT_TIME 0x00000400 /* GIO bus timed out */ +#define SGIMC_GSTAT_PROM 0x00000800 /* write to PROM when PROM_EN not set */ +#define SGIMC_GSTAT_ADDR 0x00001000 /* parity error on addr cycle */ +#define SGIMC_GSTAT_BC 0x00002000 /* parity error on byte count cycle */ +#define SGIMC_GSTAT_PIO_RD 0x00004000 /* read data parity on pio */ +#define SGIMC_GSTAT_PIO_WR 0x00008000 /* write data parity on pio */ + + /* Special hard bus locking registers. */ + u32 _unused19; + volatile u32 syssembit; /* Uni-bit system semaphore */ + u32 _unused20; + volatile u32 mlock; /* Global GIO memory access lock */ + u32 _unused21; + volatile u32 elock; /* Locks EISA from GIO accesses */ + + /* GIO dma control registers. */ + u32 _unused22[15]; + volatile u32 gio_dma_trans; /* DMA mask to translation GIO addrs */ + u32 _unused23; + volatile u32 gio_dma_sbits; /* DMA GIO addr substitution bits */ + u32 _unused24; + volatile u32 dma_intr_cause; /* DMA IRQ cause indicator bits */ + u32 _unused25; + volatile u32 dma_ctrl; /* Main DMA control reg */ + + /* DMA TLB entry 0 */ + u32 _unused26[5]; + volatile u32 dtlb_hi0; + u32 _unused27; + volatile u32 dtlb_lo0; + + /* DMA TLB entry 1 */ + u32 _unused28; + volatile u32 dtlb_hi1; + u32 _unused29; + volatile u32 dtlb_lo1; + + /* DMA TLB entry 2 */ + u32 _unused30; + volatile u32 dtlb_hi2; + u32 _unused31; + volatile u32 dtlb_lo2; + + /* DMA TLB entry 3 */ + u32 _unused32; + volatile u32 dtlb_hi3; + u32 _unused33; + volatile u32 dtlb_lo3; + + u32 _unused34[0x0392]; + + u32 _unused35; + volatile u32 rpsscounter; /* Chirps at 100ns */ + + u32 _unused36[0x1000/4-2*4]; + + u32 _unused37; + volatile u32 maddronly; /* Address DMA goes at */ + u32 _unused38; + volatile u32 maddrpdeflts; /* Same as above, plus set defaults */ + u32 _unused39; + volatile u32 dmasz; /* DMA count */ + u32 _unused40; + volatile u32 ssize; /* DMA stride size */ + u32 _unused41; + volatile u32 gmaddronly; /* Set GIO DMA but don't start trans */ + u32 _unused42; + volatile u32 dmaddnpgo; /* Set GIO DMA addr + start transfer */ + u32 _unused43; + volatile u32 dmamode; /* DMA mode config bit settings */ + u32 _unused44; + volatile u32 dmaccount; /* Zoom and byte count for DMA */ + u32 _unused45; + volatile u32 dmastart; /* Pedal to the metal. */ + u32 _unused46; + volatile u32 dmarunning; /* DMA op is in progress */ + u32 _unused47; + volatile u32 maddrdefstart; /* Set dma addr, defaults, and kick it */ +}; + +extern struct sgimc_regs *sgimc; +#define SGIMC_BASE 0x1fa00000 /* physical */ + +/* Base location of the two ram banks found in IP2[0268] machines. */ +#define SGIMC_SEG0_BADDR 0x08000000 +#define SGIMC_SEG1_BADDR 0x20000000 + +/* Maximum size of the above banks are per machine. */ +#define SGIMC_SEG0_SIZE_ALL 0x10000000 /* 256MB */ +#define SGIMC_SEG1_SIZE_IP20_IP22 0x08000000 /* 128MB */ +#define SGIMC_SEG1_SIZE_IP26_IP28 0x20000000 /* 512MB */ + +extern void sgimc_init(void); + +#endif /* _SGI_MC_H */ diff --git a/arch/mips/include/asm/sgi/pi1.h b/arch/mips/include/asm/sgi/pi1.h new file mode 100644 index 000000000000..c9506915dc5c --- /dev/null +++ b/arch/mips/include/asm/sgi/pi1.h @@ -0,0 +1,71 @@ +/* + * pi1.h: Definitions for SGI PI1 parallel port + */ + +#ifndef _SGI_PI1_H +#define _SGI_PI1_H + +struct pi1_regs { + u8 _data[3]; + volatile u8 data; + u8 _ctrl[3]; + volatile u8 ctrl; +#define PI1_CTRL_STROBE_N 0x01 +#define PI1_CTRL_AFD_N 0x02 +#define PI1_CTRL_INIT_N 0x04 +#define PI1_CTRL_SLIN_N 0x08 +#define PI1_CTRL_IRQ_ENA 0x10 +#define PI1_CTRL_DIR 0x20 +#define PI1_CTRL_SEL 0x40 + u8 _status[3]; + volatile u8 status; +#define PI1_STAT_DEVID 0x03 /* bits 0-1 */ +#define PI1_STAT_NOINK 0x04 /* SGI MODE only */ +#define PI1_STAT_ERROR 0x08 +#define PI1_STAT_ONLINE 0x10 +#define PI1_STAT_PE 0x20 +#define PI1_STAT_ACK 0x40 +#define PI1_STAT_BUSY 0x80 + u8 _dmactrl[3]; + volatile u8 dmactrl; +#define PI1_DMACTRL_FIFO_EMPTY 0x01 /* fifo empty R/O */ +#define PI1_DMACTRL_ABORT 0x02 /* reset DMA and internal fifo W/O */ +#define PI1_DMACTRL_STDMODE 0x00 /* bits 2-3 */ +#define PI1_DMACTRL_SGIMODE 0x04 /* bits 2-3 */ +#define PI1_DMACTRL_RICOHMODE 0x08 /* bits 2-3 */ +#define PI1_DMACTRL_HPMODE 0x0c /* bits 2-3 */ +#define PI1_DMACTRL_BLKMODE 0x10 /* block mode */ +#define PI1_DMACTRL_FIFO_CLEAR 0x20 /* clear fifo W/O */ +#define PI1_DMACTRL_READ 0x40 /* read */ +#define PI1_DMACTRL_RUN 0x80 /* pedal to the metal */ + u8 _intstat[3]; + volatile u8 intstat; +#define PI1_INTSTAT_ACK 0x04 +#define PI1_INTSTAT_FEMPTY 0x08 +#define PI1_INTSTAT_NOINK 0x10 +#define PI1_INTSTAT_ONLINE 0x20 +#define PI1_INTSTAT_ERR 0x40 +#define PI1_INTSTAT_PE 0x80 + u8 _intmask[3]; + volatile u8 intmask; /* enabled low, reset high*/ +#define PI1_INTMASK_ACK 0x04 +#define PI1_INTMASK_FIFO_EMPTY 0x08 +#define PI1_INTMASK_NOINK 0x10 +#define PI1_INTMASK_ONLINE 0x20 +#define PI1_INTMASK_ERR 0x40 +#define PI1_INTMASK_PE 0x80 + u8 _timer1[3]; + volatile u8 timer1; +#define PI1_TIME1 0x27 + u8 _timer2[3]; + volatile u8 timer2; +#define PI1_TIME2 0x13 + u8 _timer3[3]; + volatile u8 timer3; +#define PI1_TIME3 0x10 + u8 _timer4[3]; + volatile u8 timer4; +#define PI1_TIME4 0x00 +}; + +#endif diff --git a/arch/mips/include/asm/sgi/seeq.h b/arch/mips/include/asm/sgi/seeq.h new file mode 100644 index 000000000000..af0ffd76899d --- /dev/null +++ b/arch/mips/include/asm/sgi/seeq.h @@ -0,0 +1,21 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 by Ralf Baechle + */ +#ifndef __ASM_SGI_SEEQ_H +#define __ASM_SGI_SEEQ_H + +#include <linux/if_ether.h> + +#include <asm/sgi/hpc3.h> + +struct sgiseeq_platform_data { + struct hpc3_regs *hpc; + unsigned int irq; + unsigned char mac[ETH_ALEN]; +}; + +#endif /* __ASM_SGI_SEEQ_H */ diff --git a/arch/mips/include/asm/sgi/sgi.h b/arch/mips/include/asm/sgi/sgi.h new file mode 100644 index 000000000000..645cea7c0f8e --- /dev/null +++ b/arch/mips/include/asm/sgi/sgi.h @@ -0,0 +1,47 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * sgi.h: Definitions specific to SGI machines. + * + * Copyright (C) 1996 David S. Miller (dm@sgi.com) + */ +#ifndef _ASM_SGI_SGI_H +#define _ASM_SGI_SGI_H + +/* UP=UniProcessor MP=MultiProcessor(capable) */ +enum sgi_mach { + ip4, /* R2k UP */ + ip5, /* R2k MP */ + ip6, /* R3k UP */ + ip7, /* R3k MP */ + ip9, /* R3k UP */ + ip12, /* R3kA UP, Indigo */ + ip15, /* R3kA MP */ + ip17, /* R4K UP */ + ip19, /* R4K MP */ + ip20, /* R4K UP, Indigo */ + ip21, /* TFP MP */ + ip22, /* R4x00 UP, Indigo2 */ + ip25, /* R10k MP */ + ip26, /* TFP UP, Indigo2 */ + ip27, /* R10k MP, R12k MP, Origin */ + ip28, /* R10k UP, Indigo2 */ + ip30, /* Octane */ + ip32, /* O2 */ +}; + +extern enum sgi_mach sgimach; +extern void sgi_sysinit(void); + +/* Many I/O space registers are byte sized and are contained within + * one byte per word, specifically the MSB, this macro helps out. + */ +#ifdef __MIPSEL__ +#define SGI_MSB(regaddr) (regaddr) +#else +#define SGI_MSB(regaddr) ((regaddr) | 0x3) +#endif + +#endif /* _ASM_SGI_SGI_H */ diff --git a/arch/mips/include/asm/sgi/wd.h b/arch/mips/include/asm/sgi/wd.h new file mode 100644 index 000000000000..0d6c3a4da891 --- /dev/null +++ b/arch/mips/include/asm/sgi/wd.h @@ -0,0 +1,20 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 by Ralf Baechle + */ +#ifndef __ASM_SGI_WD_H +#define __ASM_SGI_WD_H + +#include <asm/sgi/hpc3.h> + +struct sgiwd93_platform_data { + unsigned int unit; + unsigned int irq; + struct hpc3_scsiregs *hregs; + unsigned char *wdregs; +}; + +#endif /* __ASM_SGI_WD_H */ diff --git a/arch/mips/include/asm/sgialib.h b/arch/mips/include/asm/sgialib.h new file mode 100644 index 000000000000..bfce5c786f1c --- /dev/null +++ b/arch/mips/include/asm/sgialib.h @@ -0,0 +1,124 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * SGI ARCS firmware interface library for the Linux kernel. + * + * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 2001, 2002 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_SGIALIB_H +#define _ASM_SGIALIB_H + +#include <asm/sgiarcs.h> + +extern struct linux_romvec *romvec; +extern int prom_argc; + +extern LONG *_prom_argv, *_prom_envp; + +/* A 32-bit ARC PROM pass arguments and environment as 32-bit pointer. + These macros take care of sign extension. */ +#define prom_argv(index) ((char *) (long) _prom_argv[(index)]) +#define prom_argc(index) ((char *) (long) _prom_argc[(index)]) + +extern int prom_flags; + +#define PROM_FLAG_ARCS 1 +#define PROM_FLAG_USE_AS_CONSOLE 2 +#define PROM_FLAG_DONT_FREE_TEMP 4 + +/* Simple char-by-char console I/O. */ +extern void prom_putchar(char c); +extern char prom_getchar(void); + +/* Memory descriptor management. */ +#define PROM_MAX_PMEMBLOCKS 32 +struct prom_pmemblock { + LONG base; /* Within KSEG0 or XKPHYS. */ + ULONG size; /* In bytes. */ + ULONG type; /* free or prom memory */ +}; + +/* Get next memory descriptor after CURR, returns first descriptor + * in chain is CURR is NULL. + */ +extern struct linux_mdesc *prom_getmdesc(struct linux_mdesc *curr); +#define PROM_NULL_MDESC ((struct linux_mdesc *) 0) + +/* Called by prom_init to setup the physical memory pmemblock + * array. + */ +extern void prom_meminit(void); +extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem); + +/* PROM device tree library routines. */ +#define PROM_NULL_COMPONENT ((pcomponent *) 0) + +/* Get sibling component of THIS. */ +extern pcomponent *ArcGetPeer(pcomponent *this); + +/* Get child component of THIS. */ +extern pcomponent *ArcGetChild(pcomponent *this); + +/* Get parent component of CHILD. */ +extern pcomponent *prom_getparent(pcomponent *child); + +/* Copy component opaque data of component THIS into BUFFER + * if component THIS has opaque data. Returns success or + * failure status. + */ +extern long prom_getcdata(void *buffer, pcomponent *this); + +/* Other misc. component routines. */ +extern pcomponent *prom_childadd(pcomponent *this, pcomponent *tmp, void *data); +extern long prom_delcomponent(pcomponent *this); +extern pcomponent *prom_componentbypath(char *path); + +/* This is called at prom_init time to identify the + * ARC architecture we are running on + */ +extern void prom_identify_arch(void); + +/* Environment variable routines. */ +extern PCHAR ArcGetEnvironmentVariable(PCHAR name); +extern LONG ArcSetEnvironmentVariable(PCHAR name, PCHAR value); + +/* ARCS command line acquisition and parsing. */ +extern char *prom_getcmdline(void); +extern void prom_init_cmdline(void); + +/* Acquiring info about the current time, etc. */ +extern struct linux_tinfo *prom_gettinfo(void); +extern unsigned long prom_getrtime(void); + +/* File operations. */ +extern long prom_getvdirent(unsigned long fd, struct linux_vdirent *ent, unsigned long num, unsigned long *cnt); +extern long prom_open(char *name, enum linux_omode md, unsigned long *fd); +extern long prom_close(unsigned long fd); +extern LONG ArcRead(ULONG fd, PVOID buf, ULONG num, PULONG cnt); +extern long prom_getrstatus(unsigned long fd); +extern LONG ArcWrite(ULONG fd, PVOID buf, ULONG num, PULONG cnt); +extern long prom_seek(unsigned long fd, struct linux_bigint *off, enum linux_seekmode sm); +extern long prom_mount(char *name, enum linux_mountops op); +extern long prom_getfinfo(unsigned long fd, struct linux_finfo *buf); +extern long prom_setfinfo(unsigned long fd, unsigned long flags, unsigned long msk); + +/* Running stand-along programs. */ +extern long prom_load(char *name, unsigned long end, unsigned long *pc, unsigned long *eaddr); +extern long prom_invoke(unsigned long pc, unsigned long sp, long argc, char **argv, char **envp); +extern long prom_exec(char *name, long argc, char **argv, char **envp); + +/* Misc. routines. */ +extern VOID prom_halt(VOID) __attribute__((noreturn)); +extern VOID prom_powerdown(VOID) __attribute__((noreturn)); +extern VOID prom_restart(VOID) __attribute__((noreturn)); +extern VOID ArcReboot(VOID) __attribute__((noreturn)); +extern VOID ArcEnterInteractiveMode(VOID) __attribute__((noreturn)); +extern long prom_cfgsave(VOID); +extern struct linux_sysid *prom_getsysid(VOID); +extern VOID ArcFlushAllCaches(VOID); +extern DISPLAY_STATUS *ArcGetDisplayStatus(ULONG FileID); + +#endif /* _ASM_SGIALIB_H */ diff --git a/arch/mips/include/asm/sgiarcs.h b/arch/mips/include/asm/sgiarcs.h new file mode 100644 index 000000000000..721327f88601 --- /dev/null +++ b/arch/mips/include/asm/sgiarcs.h @@ -0,0 +1,548 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * ARC firmware interface defines. + * + * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 1999, 2001 Ralf Baechle (ralf@gnu.org) + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_SGIARCS_H +#define _ASM_SGIARCS_H + +#include <asm/types.h> +#include <asm/fw/arc/types.h> + +/* Various ARCS error codes. */ +#define PROM_ESUCCESS 0x00 +#define PROM_E2BIG 0x01 +#define PROM_EACCESS 0x02 +#define PROM_EAGAIN 0x03 +#define PROM_EBADF 0x04 +#define PROM_EBUSY 0x05 +#define PROM_EFAULT 0x06 +#define PROM_EINVAL 0x07 +#define PROM_EIO 0x08 +#define PROM_EISDIR 0x09 +#define PROM_EMFILE 0x0a +#define PROM_EMLINK 0x0b +#define PROM_ENAMETOOLONG 0x0c +#define PROM_ENODEV 0x0d +#define PROM_ENOENT 0x0e +#define PROM_ENOEXEC 0x0f +#define PROM_ENOMEM 0x10 +#define PROM_ENOSPC 0x11 +#define PROM_ENOTDIR 0x12 +#define PROM_ENOTTY 0x13 +#define PROM_ENXIO 0x14 +#define PROM_EROFS 0x15 +/* SGI ARCS specific errno's. */ +#define PROM_EADDRNOTAVAIL 0x1f +#define PROM_ETIMEDOUT 0x20 +#define PROM_ECONNABORTED 0x21 +#define PROM_ENOCONNECT 0x22 + +/* Device classes, types, and identifiers for prom + * device inventory queries. + */ +enum linux_devclass { + system, processor, cache, adapter, controller, peripheral, memory +}; + +enum linux_devtypes { + /* Generic stuff. */ + Arc, Cpu, Fpu, + + /* Primary insn and data caches. */ + picache, pdcache, + + /* Secondary insn, data, and combined caches. */ + sicache, sdcache, sccache, + + memdev, eisa_adapter, tc_adapter, scsi_adapter, dti_adapter, + multifunc_adapter, dsk_controller, tp_controller, cdrom_controller, + worm_controller, serial_controller, net_controller, disp_controller, + parallel_controller, ptr_controller, kbd_controller, audio_controller, + misc_controller, disk_peripheral, flpy_peripheral, tp_peripheral, + modem_peripheral, monitor_peripheral, printer_peripheral, + ptr_peripheral, kbd_peripheral, term_peripheral, line_peripheral, + net_peripheral, misc_peripheral, anon +}; + +enum linux_identifier { + bogus, ronly, removable, consin, consout, input, output +}; + +/* A prom device tree component. */ +struct linux_component { + enum linux_devclass class; /* node class */ + enum linux_devtypes type; /* node type */ + enum linux_identifier iflags; /* node flags */ + USHORT vers; /* node version */ + USHORT rev; /* node revision */ + ULONG key; /* completely magic */ + ULONG amask; /* XXX affinity mask??? */ + ULONG cdsize; /* size of configuration data */ + ULONG ilen; /* length of string identifier */ + _PULONG iname; /* string identifier */ +}; +typedef struct linux_component pcomponent; + +struct linux_sysid { + char vend[8], prod[8]; +}; + +/* ARCS prom memory descriptors. */ +enum arcs_memtypes { + arcs_eblock, /* exception block */ + arcs_rvpage, /* ARCS romvec page */ + arcs_fcontig, /* Contiguous and free */ + arcs_free, /* Generic free memory */ + arcs_bmem, /* Borken memory, don't use */ + arcs_prog, /* A loaded program resides here */ + arcs_atmp, /* ARCS temporary storage area, wish Sparc OpenBoot told this */ + arcs_aperm, /* ARCS permanent storage... */ +}; + +/* ARC has slightly different types than ARCS */ +enum arc_memtypes { + arc_eblock, /* exception block */ + arc_rvpage, /* romvec page */ + arc_free, /* Generic free memory */ + arc_bmem, /* Borken memory, don't use */ + arc_prog, /* A loaded program resides here */ + arc_atmp, /* temporary storage area */ + arc_aperm, /* permanent storage */ + arc_fcontig, /* Contiguous and free */ +}; + +union linux_memtypes { + enum arcs_memtypes arcs; + enum arc_memtypes arc; +}; + +struct linux_mdesc { + union linux_memtypes type; + ULONG base; + ULONG pages; +}; + +/* Time of day descriptor. */ +struct linux_tinfo { + unsigned short yr; + unsigned short mnth; + unsigned short day; + unsigned short hr; + unsigned short min; + unsigned short sec; + unsigned short msec; +}; + +/* ARCS virtual dirents. */ +struct linux_vdirent { + ULONG namelen; + unsigned char attr; + char fname[32]; /* XXX imperical, should be a define */ +}; + +/* Other stuff for files. */ +enum linux_omode { + rdonly, wronly, rdwr, wronly_creat, rdwr_creat, + wronly_ssede, rdwr_ssede, dirent, dirent_creat +}; + +enum linux_seekmode { + absolute, relative +}; + +enum linux_mountops { + media_load, media_unload +}; + +/* This prom has a bolixed design. */ +struct linux_bigint { +#ifdef __MIPSEL__ + u32 lo; + s32 hi; +#else /* !(__MIPSEL__) */ + s32 hi; + u32 lo; +#endif +}; + +struct linux_finfo { + struct linux_bigint begin; + struct linux_bigint end; + struct linux_bigint cur; + enum linux_devtypes dtype; + unsigned long namelen; + unsigned char attr; + char name[32]; /* XXX imperical, should be define */ +}; + +/* This describes the vector containing function pointers to the ARC + firmware functions. */ +struct linux_romvec { + LONG load; /* Load an executable image. */ + LONG invoke; /* Invoke a standalong image. */ + LONG exec; /* Load and begin execution of a + standalone image. */ + LONG halt; /* Halt the machine. */ + LONG pdown; /* Power down the machine. */ + LONG restart; /* XXX soft reset??? */ + LONG reboot; /* Reboot the machine. */ + LONG imode; /* Enter PROM interactive mode. */ + LONG _unused1; /* Was ReturnFromMain(). */ + + /* PROM device tree interface. */ + LONG next_component; + LONG child_component; + LONG parent_component; + LONG component_data; + LONG child_add; + LONG comp_del; + LONG component_by_path; + + /* Misc. stuff. */ + LONG cfg_save; + LONG get_sysid; + + /* Probing for memory. */ + LONG get_mdesc; + LONG _unused2; /* was Signal() */ + + LONG get_tinfo; + LONG get_rtime; + + /* File type operations. */ + LONG get_vdirent; + LONG open; + LONG close; + LONG read; + LONG get_rstatus; + LONG write; + LONG seek; + LONG mount; + + /* Dealing with firmware environment variables. */ + LONG get_evar; + LONG set_evar; + + LONG get_finfo; + LONG set_finfo; + + /* Miscellaneous. */ + LONG cache_flush; + LONG TestUnicodeCharacter; /* ARC; not sure if ARCS too */ + LONG GetDisplayStatus; +}; + +/* The SGI ARCS parameter block is in a fixed location for standalone + * programs to access PROM facilities easily. + */ +typedef struct _SYSTEM_PARAMETER_BLOCK { + ULONG magic; /* magic cookie */ +#define PROMBLOCK_MAGIC 0x53435241 + + ULONG len; /* length of parm block */ + USHORT ver; /* ARCS firmware version */ + USHORT rev; /* ARCS firmware revision */ + _PLONG rs_block; /* Restart block. */ + _PLONG dbg_block; /* Debug block. */ + _PLONG gevect; /* XXX General vector??? */ + _PLONG utlbvect; /* XXX UTLB vector??? */ + ULONG rveclen; /* Size of romvec struct. */ + _PVOID romvec; /* Function interface. */ + ULONG pveclen; /* Length of private vector. */ + _PVOID pvector; /* Private vector. */ + ULONG adap_cnt; /* Adapter count. */ + ULONG adap_typ0; /* First adapter type. */ + ULONG adap_vcnt0; /* Adapter 0 vector count. */ + _PVOID adap_vector; /* Adapter 0 vector ptr. */ + ULONG adap_typ1; /* Second adapter type. */ + ULONG adap_vcnt1; /* Adapter 1 vector count. */ + _PVOID adap_vector1; /* Adapter 1 vector ptr. */ + /* More adapter vectors go here... */ +} SYSTEM_PARAMETER_BLOCK, *PSYSTEM_PARAMETER_BLOCK; + +#define PROMBLOCK ((PSYSTEM_PARAMETER_BLOCK) (int)0xA0001000) +#define ROMVECTOR ((struct linux_romvec *) (long)(PROMBLOCK)->romvec) + +/* Cache layout parameter block. */ +union linux_cache_key { + struct param { +#ifdef __MIPSEL__ + unsigned short size; + unsigned char lsize; + unsigned char bsize; +#else /* !(__MIPSEL__) */ + unsigned char bsize; + unsigned char lsize; + unsigned short size; +#endif + } info; + unsigned long allinfo; +}; + +/* Configuration data. */ +struct linux_cdata { + char *name; + int mlen; + enum linux_devtypes type; +}; + +/* Common SGI ARCS firmware file descriptors. */ +#define SGIPROM_STDIN 0 +#define SGIPROM_STDOUT 1 + +/* Common SGI ARCS firmware file types. */ +#define SGIPROM_ROFILE 0x01 /* read-only file */ +#define SGIPROM_HFILE 0x02 /* hidden file */ +#define SGIPROM_SFILE 0x04 /* System file */ +#define SGIPROM_AFILE 0x08 /* Archive file */ +#define SGIPROM_DFILE 0x10 /* Directory file */ +#define SGIPROM_DELFILE 0x20 /* Deleted file */ + +/* SGI ARCS boot record information. */ +struct sgi_partition { + unsigned char flag; +#define SGIPART_UNUSED 0x00 +#define SGIPART_ACTIVE 0x80 + + unsigned char shead, ssect, scyl; /* unused */ + unsigned char systype; /* OS type, Irix or NT */ + unsigned char ehead, esect, ecyl; /* unused */ + unsigned char rsect0, rsect1, rsect2, rsect3; + unsigned char tsect0, tsect1, tsect2, tsect3; +}; + +#define SGIBBLOCK_MAGIC 0xaa55 +#define SGIBBLOCK_MAXPART 0x0004 + +struct sgi_bootblock { + unsigned char _unused[446]; + struct sgi_partition partitions[SGIBBLOCK_MAXPART]; + unsigned short magic; +}; + +/* BIOS parameter block. */ +struct sgi_bparm_block { + unsigned short bytes_sect; /* bytes per sector */ + unsigned char sect_clust; /* sectors per cluster */ + unsigned short sect_resv; /* reserved sectors */ + unsigned char nfats; /* # of allocation tables */ + unsigned short nroot_dirents; /* # of root directory entries */ + unsigned short sect_volume; /* sectors in volume */ + unsigned char media_type; /* media descriptor */ + unsigned short sect_fat; /* sectors per allocation table */ + unsigned short sect_track; /* sectors per track */ + unsigned short nheads; /* # of heads */ + unsigned short nhsects; /* # of hidden sectors */ +}; + +struct sgi_bsector { + unsigned char jmpinfo[3]; + unsigned char manuf_name[8]; + struct sgi_bparm_block info; +}; + +/* Debugging block used with SGI symmon symbolic debugger. */ +#define SMB_DEBUG_MAGIC 0xfeeddead +struct linux_smonblock { + unsigned long magic; + void (*handler)(void); /* Breakpoint routine. */ + unsigned long dtable_base; /* Base addr of dbg table. */ + int (*printf)(const char *fmt, ...); + unsigned long btable_base; /* Breakpoint table. */ + unsigned long mpflushreqs; /* SMP cache flush request list. */ + unsigned long ntab; /* Name table. */ + unsigned long stab; /* Symbol table. */ + int smax; /* Max # of symbols. */ +}; + +/* + * Macros for calling a 32-bit ARC implementation from 64-bit code + */ + +#if defined(CONFIG_64BIT) && defined(CONFIG_ARC32) + +#define __arc_clobbers \ + "$2", "$3" /* ... */, "$8", "$9", "$10", "$11", \ + "$12", "$13", "$14", "$15", "$16", "$24", "$25", "$31" + +#define ARC_CALL0(dest) \ +({ long __res; \ + long __vec = (long) romvec->dest; \ + __asm__ __volatile__( \ + "dsubu\t$29, 32\n\t" \ + "jalr\t%1\n\t" \ + "daddu\t$29, 32\n\t" \ + "move\t%0, $2" \ + : "=r" (__res), "=r" (__vec) \ + : "1" (__vec) \ + : __arc_clobbers, "$4", "$5", "$6", "$7"); \ + (unsigned long) __res; \ +}) + +#define ARC_CALL1(dest, a1) \ +({ long __res; \ + register signed int __a1 __asm__("$4") = (int) (long) (a1); \ + long __vec = (long) romvec->dest; \ + __asm__ __volatile__( \ + "dsubu\t$29, 32\n\t" \ + "jalr\t%1\n\t" \ + "daddu\t$29, 32\n\t" \ + "move\t%0, $2" \ + : "=r" (__res), "=r" (__vec) \ + : "1" (__vec), "r" (__a1) \ + : __arc_clobbers, "$5", "$6", "$7"); \ + (unsigned long) __res; \ +}) + +#define ARC_CALL2(dest, a1, a2) \ +({ long __res; \ + register signed int __a1 __asm__("$4") = (int) (long) (a1); \ + register signed int __a2 __asm__("$5") = (int) (long) (a2); \ + long __vec = (long) romvec->dest; \ + __asm__ __volatile__( \ + "dsubu\t$29, 32\n\t" \ + "jalr\t%1\n\t" \ + "daddu\t$29, 32\n\t" \ + "move\t%0, $2" \ + : "=r" (__res), "=r" (__vec) \ + : "1" (__vec), "r" (__a1), "r" (__a2) \ + : __arc_clobbers, "$6", "$7"); \ + __res; \ +}) + +#define ARC_CALL3(dest, a1, a2, a3) \ +({ long __res; \ + register signed int __a1 __asm__("$4") = (int) (long) (a1); \ + register signed int __a2 __asm__("$5") = (int) (long) (a2); \ + register signed int __a3 __asm__("$6") = (int) (long) (a3); \ + long __vec = (long) romvec->dest; \ + __asm__ __volatile__( \ + "dsubu\t$29, 32\n\t" \ + "jalr\t%1\n\t" \ + "daddu\t$29, 32\n\t" \ + "move\t%0, $2" \ + : "=r" (__res), "=r" (__vec) \ + : "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3) \ + : __arc_clobbers, "$7"); \ + __res; \ +}) + +#define ARC_CALL4(dest, a1, a2, a3, a4) \ +({ long __res; \ + register signed int __a1 __asm__("$4") = (int) (long) (a1); \ + register signed int __a2 __asm__("$5") = (int) (long) (a2); \ + register signed int __a3 __asm__("$6") = (int) (long) (a3); \ + register signed int __a4 __asm__("$7") = (int) (long) (a4); \ + long __vec = (long) romvec->dest; \ + __asm__ __volatile__( \ + "dsubu\t$29, 32\n\t" \ + "jalr\t%1\n\t" \ + "daddu\t$29, 32\n\t" \ + "move\t%0, $2" \ + : "=r" (__res), "=r" (__vec) \ + : "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3), \ + "r" (__a4) \ + : __arc_clobbers); \ + __res; \ +}) + +#define ARC_CALL5(dest, a1, a2, a3, a4, a5) \ +({ long __res; \ + register signed int __a1 __asm__("$4") = (int) (long) (a1); \ + register signed int __a2 __asm__("$5") = (int) (long) (a2); \ + register signed int __a3 __asm__("$6") = (int) (long) (a3); \ + register signed int __a4 __asm__("$7") = (int) (long) (a4); \ + register signed int __a5 = (int) (long) (a5); \ + long __vec = (long) romvec->dest; \ + __asm__ __volatile__( \ + "dsubu\t$29, 32\n\t" \ + "sw\t%7, 16($29)\n\t" \ + "jalr\t%1\n\t" \ + "daddu\t$29, 32\n\t" \ + "move\t%0, $2" \ + : "=r" (__res), "=r" (__vec) \ + : "1" (__vec), \ + "r" (__a1), "r" (__a2), "r" (__a3), "r" (__a4), \ + "r" (__a5) \ + : __arc_clobbers); \ + __res; \ +}) + +#endif /* defined(CONFIG_64BIT) && defined(CONFIG_ARC32) */ + +#if (defined(CONFIG_32BIT) && defined(CONFIG_ARC32)) || \ + (defined(CONFIG_64BIT) && defined(CONFIG_ARC64)) + +#define ARC_CALL0(dest) \ +({ long __res; \ + long (*__vec)(void) = (void *) romvec->dest; \ + \ + __res = __vec(); \ + __res; \ +}) + +#define ARC_CALL1(dest, a1) \ +({ long __res; \ + long __a1 = (long) (a1); \ + long (*__vec)(long) = (void *) romvec->dest; \ + \ + __res = __vec(__a1); \ + __res; \ +}) + +#define ARC_CALL2(dest, a1, a2) \ +({ long __res; \ + long __a1 = (long) (a1); \ + long __a2 = (long) (a2); \ + long (*__vec)(long, long) = (void *) romvec->dest; \ + \ + __res = __vec(__a1, __a2); \ + __res; \ +}) + +#define ARC_CALL3(dest, a1, a2, a3) \ +({ long __res; \ + long __a1 = (long) (a1); \ + long __a2 = (long) (a2); \ + long __a3 = (long) (a3); \ + long (*__vec)(long, long, long) = (void *) romvec->dest; \ + \ + __res = __vec(__a1, __a2, __a3); \ + __res; \ +}) + +#define ARC_CALL4(dest, a1, a2, a3, a4) \ +({ long __res; \ + long __a1 = (long) (a1); \ + long __a2 = (long) (a2); \ + long __a3 = (long) (a3); \ + long __a4 = (long) (a4); \ + long (*__vec)(long, long, long, long) = (void *) romvec->dest; \ + \ + __res = __vec(__a1, __a2, __a3, __a4); \ + __res; \ +}) + +#define ARC_CALL5(dest, a1, a2, a3, a4, a5) \ +({ long __res; \ + long __a1 = (long) (a1); \ + long __a2 = (long) (a2); \ + long __a3 = (long) (a3); \ + long __a4 = (long) (a4); \ + long __a5 = (long) (a5); \ + long (*__vec)(long, long, long, long, long); \ + __vec = (void *) romvec->dest; \ + \ + __res = __vec(__a1, __a2, __a3, __a4, __a5); \ + __res; \ +}) +#endif /* both kernel and ARC either 32-bit or 64-bit */ + +#endif /* _ASM_SGIARCS_H */ diff --git a/arch/mips/include/asm/sgidefs.h b/arch/mips/include/asm/sgidefs.h new file mode 100644 index 000000000000..876442fcfb32 --- /dev/null +++ b/arch/mips/include/asm/sgidefs.h @@ -0,0 +1,44 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1999, 2001 Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#ifndef __ASM_SGIDEFS_H +#define __ASM_SGIDEFS_H + +/* + * Using a Linux compiler for building Linux seems logic but not to + * everybody. + */ +#ifndef __linux__ +#error Use a Linux compiler or give up. +#endif + +/* + * Definitions for the ISA levels + * + * With the introduction of MIPS32 / MIPS64 instruction sets definitions + * MIPS ISAs are no longer subsets of each other. Therefore comparisons + * on these symbols except with == may result in unexpected results and + * are forbidden! + */ +#define _MIPS_ISA_MIPS1 1 +#define _MIPS_ISA_MIPS2 2 +#define _MIPS_ISA_MIPS3 3 +#define _MIPS_ISA_MIPS4 4 +#define _MIPS_ISA_MIPS5 5 +#define _MIPS_ISA_MIPS32 6 +#define _MIPS_ISA_MIPS64 7 + +/* + * Subprogram calling convention + */ +#define _MIPS_SIM_ABI32 1 +#define _MIPS_SIM_NABI32 2 +#define _MIPS_SIM_ABI64 3 + +#endif /* __ASM_SGIDEFS_H */ diff --git a/arch/mips/include/asm/shmbuf.h b/arch/mips/include/asm/shmbuf.h new file mode 100644 index 000000000000..f994438277bf --- /dev/null +++ b/arch/mips/include/asm/shmbuf.h @@ -0,0 +1,38 @@ +#ifndef _ASM_SHMBUF_H +#define _ASM_SHMBUF_H + +/* + * The shmid64_ds structure for the MIPS architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 2 miscellaneous 32-bit rsp. 64-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + __kernel_time_t shm_dtime; /* last detach time */ + __kernel_time_t shm_ctime; /* last change time */ + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused1; + unsigned long __unused2; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_SHMBUF_H */ diff --git a/arch/mips/include/asm/shmparam.h b/arch/mips/include/asm/shmparam.h new file mode 100644 index 000000000000..09290720751c --- /dev/null +++ b/arch/mips/include/asm/shmparam.h @@ -0,0 +1,13 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef _ASM_SHMPARAM_H +#define _ASM_SHMPARAM_H + +#define __ARCH_FORCE_SHMLBA 1 + +#define SHMLBA 0x40000 /* attach addr a multiple of this */ + +#endif /* _ASM_SHMPARAM_H */ diff --git a/arch/mips/include/asm/sibyte/bcm1480_int.h b/arch/mips/include/asm/sibyte/bcm1480_int.h new file mode 100644 index 000000000000..6109557c14e9 --- /dev/null +++ b/arch/mips/include/asm/sibyte/bcm1480_int.h @@ -0,0 +1,312 @@ +/* ********************************************************************* + * BCM1280/BCM1480 Board Support Package + * + * Interrupt Mapper definitions File: bcm1480_int.h + * + * This module contains constants for manipulating the + * BCM1255/BCM1280/BCM1455/BCM1480's interrupt mapper and + * definitions for the interrupt sources. + * + * BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03) + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _BCM1480_INT_H +#define _BCM1480_INT_H + +#include "sb1250_defs.h" + +/* ********************************************************************* + * Interrupt Mapper Constants + ********************************************************************* */ + +/* + * The interrupt mapper deals with 128-bit logical registers that are + * implemented as pairs of 64-bit registers, with the "low" 64 bits in + * a register that has an address 0x1000 higher(!) than the + * corresponding "high" register. + * + * For appropriate registers, bit 0 of the "high" register is a + * cascade bit that summarizes (as a bit-OR) the 64 bits of the "low" + * register. + */ + +/* + * This entire file uses _BCM1480_ in all the symbols because it is + * entirely BCM1480 specific. + */ + +/* + * Interrupt sources (Table 22) + */ + +#define K_BCM1480_INT_SOURCES 128 + +#define _BCM1480_INT_HIGH(k) (k) +#define _BCM1480_INT_LOW(k) ((k)+64) + +#define K_BCM1480_INT_ADDR_TRAP _BCM1480_INT_HIGH(1) +#define K_BCM1480_INT_GPIO_0 _BCM1480_INT_HIGH(4) +#define K_BCM1480_INT_GPIO_1 _BCM1480_INT_HIGH(5) +#define K_BCM1480_INT_GPIO_2 _BCM1480_INT_HIGH(6) +#define K_BCM1480_INT_GPIO_3 _BCM1480_INT_HIGH(7) +#define K_BCM1480_INT_PCI_INTA _BCM1480_INT_HIGH(8) +#define K_BCM1480_INT_PCI_INTB _BCM1480_INT_HIGH(9) +#define K_BCM1480_INT_PCI_INTC _BCM1480_INT_HIGH(10) +#define K_BCM1480_INT_PCI_INTD _BCM1480_INT_HIGH(11) +#define K_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_HIGH(12) +#define K_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_HIGH(13) +#define K_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_HIGH(14) +#define K_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_HIGH(15) +#define K_BCM1480_INT_TIMER_0 _BCM1480_INT_HIGH(20) +#define K_BCM1480_INT_TIMER_1 _BCM1480_INT_HIGH(21) +#define K_BCM1480_INT_TIMER_2 _BCM1480_INT_HIGH(22) +#define K_BCM1480_INT_TIMER_3 _BCM1480_INT_HIGH(23) +#define K_BCM1480_INT_DM_CH_0 _BCM1480_INT_HIGH(28) +#define K_BCM1480_INT_DM_CH_1 _BCM1480_INT_HIGH(29) +#define K_BCM1480_INT_DM_CH_2 _BCM1480_INT_HIGH(30) +#define K_BCM1480_INT_DM_CH_3 _BCM1480_INT_HIGH(31) +#define K_BCM1480_INT_MAC_0 _BCM1480_INT_HIGH(36) +#define K_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_HIGH(37) +#define K_BCM1480_INT_MAC_1 _BCM1480_INT_HIGH(38) +#define K_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_HIGH(39) +#define K_BCM1480_INT_MAC_2 _BCM1480_INT_HIGH(40) +#define K_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_HIGH(41) +#define K_BCM1480_INT_MAC_3 _BCM1480_INT_HIGH(42) +#define K_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_HIGH(43) +#define K_BCM1480_INT_PMI_LOW _BCM1480_INT_HIGH(52) +#define K_BCM1480_INT_PMI_HIGH _BCM1480_INT_HIGH(53) +#define K_BCM1480_INT_PMO_LOW _BCM1480_INT_HIGH(54) +#define K_BCM1480_INT_PMO_HIGH _BCM1480_INT_HIGH(55) +#define K_BCM1480_INT_MBOX_0_0 _BCM1480_INT_HIGH(56) +#define K_BCM1480_INT_MBOX_0_1 _BCM1480_INT_HIGH(57) +#define K_BCM1480_INT_MBOX_0_2 _BCM1480_INT_HIGH(58) +#define K_BCM1480_INT_MBOX_0_3 _BCM1480_INT_HIGH(59) +#define K_BCM1480_INT_MBOX_1_0 _BCM1480_INT_HIGH(60) +#define K_BCM1480_INT_MBOX_1_1 _BCM1480_INT_HIGH(61) +#define K_BCM1480_INT_MBOX_1_2 _BCM1480_INT_HIGH(62) +#define K_BCM1480_INT_MBOX_1_3 _BCM1480_INT_HIGH(63) + +#define K_BCM1480_INT_BAD_ECC _BCM1480_INT_LOW(1) +#define K_BCM1480_INT_COR_ECC _BCM1480_INT_LOW(2) +#define K_BCM1480_INT_IO_BUS _BCM1480_INT_LOW(3) +#define K_BCM1480_INT_PERF_CNT _BCM1480_INT_LOW(4) +#define K_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_LOW(5) +#define K_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_LOW(6) +#define K_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_LOW(7) +#define K_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_LOW(8) +#define K_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_LOW(9) +#define K_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_LOW(10) +#define K_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_LOW(11) +#define K_BCM1480_INT_PCI_ERROR _BCM1480_INT_LOW(16) +#define K_BCM1480_INT_PCI_RESET _BCM1480_INT_LOW(17) +#define K_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_LOW(18) +#define K_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_LOW(19) +#define K_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_LOW(20) +#define K_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_LOW(21) +#define K_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_LOW(22) +#define K_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_LOW(23) +#define K_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_LOW(24) +#define K_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_LOW(25) +#define K_BCM1480_INT_LDT_SMI _BCM1480_INT_LOW(32) +#define K_BCM1480_INT_LDT_NMI _BCM1480_INT_LOW(33) +#define K_BCM1480_INT_LDT_INIT _BCM1480_INT_LOW(34) +#define K_BCM1480_INT_LDT_STARTUP _BCM1480_INT_LOW(35) +#define K_BCM1480_INT_LDT_EXT _BCM1480_INT_LOW(36) +#define K_BCM1480_INT_SMB_0 _BCM1480_INT_LOW(40) +#define K_BCM1480_INT_SMB_1 _BCM1480_INT_LOW(41) +#define K_BCM1480_INT_PCMCIA _BCM1480_INT_LOW(42) +#define K_BCM1480_INT_UART_0 _BCM1480_INT_LOW(44) +#define K_BCM1480_INT_UART_1 _BCM1480_INT_LOW(45) +#define K_BCM1480_INT_UART_2 _BCM1480_INT_LOW(46) +#define K_BCM1480_INT_UART_3 _BCM1480_INT_LOW(47) +#define K_BCM1480_INT_GPIO_4 _BCM1480_INT_LOW(52) +#define K_BCM1480_INT_GPIO_5 _BCM1480_INT_LOW(53) +#define K_BCM1480_INT_GPIO_6 _BCM1480_INT_LOW(54) +#define K_BCM1480_INT_GPIO_7 _BCM1480_INT_LOW(55) +#define K_BCM1480_INT_GPIO_8 _BCM1480_INT_LOW(56) +#define K_BCM1480_INT_GPIO_9 _BCM1480_INT_LOW(57) +#define K_BCM1480_INT_GPIO_10 _BCM1480_INT_LOW(58) +#define K_BCM1480_INT_GPIO_11 _BCM1480_INT_LOW(59) +#define K_BCM1480_INT_GPIO_12 _BCM1480_INT_LOW(60) +#define K_BCM1480_INT_GPIO_13 _BCM1480_INT_LOW(61) +#define K_BCM1480_INT_GPIO_14 _BCM1480_INT_LOW(62) +#define K_BCM1480_INT_GPIO_15 _BCM1480_INT_LOW(63) + +/* + * Mask values for each interrupt + */ + +#define _BCM1480_INT_MASK(w, n) _SB_MAKEMASK(w, ((n) & 0x3F)) +#define _BCM1480_INT_MASK1(n) _SB_MAKEMASK1(((n) & 0x3F)) +#define _BCM1480_INT_OFFSET(n) (((n) & 0x40) << 6) + +#define M_BCM1480_INT_CASCADE _BCM1480_INT_MASK1(_BCM1480_INT_HIGH(0)) + +#define M_BCM1480_INT_ADDR_TRAP _BCM1480_INT_MASK1(K_BCM1480_INT_ADDR_TRAP) +#define M_BCM1480_INT_GPIO_0 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_0) +#define M_BCM1480_INT_GPIO_1 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_1) +#define M_BCM1480_INT_GPIO_2 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_2) +#define M_BCM1480_INT_GPIO_3 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_3) +#define M_BCM1480_INT_PCI_INTA _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTA) +#define M_BCM1480_INT_PCI_INTB _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTB) +#define M_BCM1480_INT_PCI_INTC _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTC) +#define M_BCM1480_INT_PCI_INTD _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTD) +#define M_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP0) +#define M_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP1) +#define M_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP2) +#define M_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP3) +#define M_BCM1480_INT_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_0) +#define M_BCM1480_INT_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_1) +#define M_BCM1480_INT_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_2) +#define M_BCM1480_INT_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_3) +#define M_BCM1480_INT_DM_CH_0 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_0) +#define M_BCM1480_INT_DM_CH_1 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_1) +#define M_BCM1480_INT_DM_CH_2 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_2) +#define M_BCM1480_INT_DM_CH_3 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_3) +#define M_BCM1480_INT_MAC_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0) +#define M_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0_CH1) +#define M_BCM1480_INT_MAC_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1) +#define M_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1_CH1) +#define M_BCM1480_INT_MAC_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2) +#define M_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2_CH1) +#define M_BCM1480_INT_MAC_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3) +#define M_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3_CH1) +#define M_BCM1480_INT_PMI_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_LOW) +#define M_BCM1480_INT_PMI_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH) +#define M_BCM1480_INT_PMO_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW) +#define M_BCM1480_INT_PMO_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH) +#define M_BCM1480_INT_MBOX_ALL _BCM1480_INT_MASK(8, K_BCM1480_INT_MBOX_0_0) +#define M_BCM1480_INT_MBOX_0_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0) +#define M_BCM1480_INT_MBOX_0_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1) +#define M_BCM1480_INT_MBOX_0_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2) +#define M_BCM1480_INT_MBOX_0_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_3) +#define M_BCM1480_INT_MBOX_1_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_0) +#define M_BCM1480_INT_MBOX_1_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_1) +#define M_BCM1480_INT_MBOX_1_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_2) +#define M_BCM1480_INT_MBOX_1_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_3) +#define M_BCM1480_INT_BAD_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_BAD_ECC) +#define M_BCM1480_INT_COR_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_COR_ECC) +#define M_BCM1480_INT_IO_BUS _BCM1480_INT_MASK1(K_BCM1480_INT_IO_BUS) +#define M_BCM1480_INT_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_PERF_CNT) +#define M_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_SW_PERF_CNT) +#define M_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_TRACE_FREEZE) +#define M_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_SW_TRACE_FREEZE) +#define M_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_0) +#define M_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_1) +#define M_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_2) +#define M_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_3) +#define M_BCM1480_INT_PCI_ERROR _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_ERROR) +#define M_BCM1480_INT_PCI_RESET _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_RESET) +#define M_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_MASK1(K_BCM1480_INT_NODE_CONTROLLER) +#define M_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_MASK1(K_BCM1480_INT_HOST_BRIDGE) +#define M_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_FATAL) +#define M_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_NONFATAL) +#define M_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_FATAL) +#define M_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_NONFATAL) +#define M_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_FATAL) +#define M_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_NONFATAL) +#define M_BCM1480_INT_LDT_SMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_SMI) +#define M_BCM1480_INT_LDT_NMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_NMI) +#define M_BCM1480_INT_LDT_INIT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_INIT) +#define M_BCM1480_INT_LDT_STARTUP _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_STARTUP) +#define M_BCM1480_INT_LDT_EXT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_EXT) +#define M_BCM1480_INT_SMB_0 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_0) +#define M_BCM1480_INT_SMB_1 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_1) +#define M_BCM1480_INT_PCMCIA _BCM1480_INT_MASK1(K_BCM1480_INT_PCMCIA) +#define M_BCM1480_INT_UART_0 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_0) +#define M_BCM1480_INT_UART_1 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_1) +#define M_BCM1480_INT_UART_2 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_2) +#define M_BCM1480_INT_UART_3 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_3) +#define M_BCM1480_INT_GPIO_4 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_4) +#define M_BCM1480_INT_GPIO_5 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_5) +#define M_BCM1480_INT_GPIO_6 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_6) +#define M_BCM1480_INT_GPIO_7 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_7) +#define M_BCM1480_INT_GPIO_8 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_8) +#define M_BCM1480_INT_GPIO_9 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_9) +#define M_BCM1480_INT_GPIO_10 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_10) +#define M_BCM1480_INT_GPIO_11 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_11) +#define M_BCM1480_INT_GPIO_12 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_12) +#define M_BCM1480_INT_GPIO_13 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_13) +#define M_BCM1480_INT_GPIO_14 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_14) +#define M_BCM1480_INT_GPIO_15 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_15) + +/* + * Interrupt mappings (Table 18) + */ + +#define K_BCM1480_INT_MAP_I0 0 /* interrupt pins on processor */ +#define K_BCM1480_INT_MAP_I1 1 +#define K_BCM1480_INT_MAP_I2 2 +#define K_BCM1480_INT_MAP_I3 3 +#define K_BCM1480_INT_MAP_I4 4 +#define K_BCM1480_INT_MAP_I5 5 +#define K_BCM1480_INT_MAP_NMI 6 /* nonmaskable */ +#define K_BCM1480_INT_MAP_DINT 7 /* debug interrupt */ + +/* + * Interrupt LDT Set Register (Table 19) + */ + +#define S_BCM1480_INT_HT_INTMSG 0 +#define M_BCM1480_INT_HT_INTMSG _SB_MAKEMASK(3, S_BCM1480_INT_HT_INTMSG) +#define V_BCM1480_INT_HT_INTMSG(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTMSG) +#define G_BCM1480_INT_HT_INTMSG(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_INTMSG, M_BCM1480_INT_HT_INTMSG) + +#define K_BCM1480_INT_HT_INTMSG_FIXED 0 +#define K_BCM1480_INT_HT_INTMSG_ARBITRATED 1 +#define K_BCM1480_INT_HT_INTMSG_SMI 2 +#define K_BCM1480_INT_HT_INTMSG_NMI 3 +#define K_BCM1480_INT_HT_INTMSG_INIT 4 +#define K_BCM1480_INT_HT_INTMSG_STARTUP 5 +#define K_BCM1480_INT_HT_INTMSG_EXTINT 6 +#define K_BCM1480_INT_HT_INTMSG_RESERVED 7 + +#define M_BCM1480_INT_HT_TRIGGERMODE _SB_MAKEMASK1(3) +#define V_BCM1480_INT_HT_EDGETRIGGER 0 +#define V_BCM1480_INT_HT_LEVELTRIGGER M_BCM1480_INT_HT_TRIGGERMODE + +#define M_BCM1480_INT_HT_DESTMODE _SB_MAKEMASK1(4) +#define V_BCM1480_INT_HT_PHYSICALDEST 0 +#define V_BCM1480_INT_HT_LOGICALDEST M_BCM1480_INT_HT_DESTMODE + +#define S_BCM1480_INT_HT_INTDEST 5 +#define M_BCM1480_INT_HT_INTDEST _SB_MAKEMASK(8, S_BCM1480_INT_HT_INTDEST) +#define V_BCM1480_INT_HT_INTDEST(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTDEST) +#define G_BCM1480_INT_HT_INTDEST(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_INTDEST, M_BCM1480_INT_HT_INTDEST) + +#define S_BCM1480_INT_HT_VECTOR 13 +#define M_BCM1480_INT_HT_VECTOR _SB_MAKEMASK(8, S_BCM1480_INT_HT_VECTOR) +#define V_BCM1480_INT_HT_VECTOR(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_VECTOR) +#define G_BCM1480_INT_HT_VECTOR(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_VECTOR, M_BCM1480_INT_HT_VECTOR) + +/* + * Vector prefix (Table 4-7) + */ + +#define M_BCM1480_HTVECT_RAISE_INTLDT_HIGH 0x00 +#define M_BCM1480_HTVECT_RAISE_MBOX_0 0x40 +#define M_BCM1480_HTVECT_RAISE_INTLDT_LO 0x80 +#define M_BCM1480_HTVECT_RAISE_MBOX_1 0xC0 + +#endif /* _BCM1480_INT_H */ diff --git a/arch/mips/include/asm/sibyte/bcm1480_l2c.h b/arch/mips/include/asm/sibyte/bcm1480_l2c.h new file mode 100644 index 000000000000..fd75817f7ac4 --- /dev/null +++ b/arch/mips/include/asm/sibyte/bcm1480_l2c.h @@ -0,0 +1,176 @@ +/* ********************************************************************* + * BCM1280/BCM1480 Board Support Package + * + * L2 Cache constants and macros File: bcm1480_l2c.h + * + * This module contains constants useful for manipulating the + * level 2 cache. + * + * BCM1400 specification level: 1280-UM100-D2 (11/14/03) + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _BCM1480_L2C_H +#define _BCM1480_L2C_H + +#include "sb1250_defs.h" + +/* + * Format of level 2 cache management address (Table 55) + */ + +#define S_BCM1480_L2C_MGMT_INDEX 5 +#define M_BCM1480_L2C_MGMT_INDEX _SB_MAKEMASK(12, S_BCM1480_L2C_MGMT_INDEX) +#define V_BCM1480_L2C_MGMT_INDEX(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_INDEX) +#define G_BCM1480_L2C_MGMT_INDEX(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_INDEX, M_BCM1480_L2C_MGMT_INDEX) + +#define S_BCM1480_L2C_MGMT_WAY 17 +#define M_BCM1480_L2C_MGMT_WAY _SB_MAKEMASK(3, S_BCM1480_L2C_MGMT_WAY) +#define V_BCM1480_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_WAY) +#define G_BCM1480_L2C_MGMT_WAY(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_WAY, M_BCM1480_L2C_MGMT_WAY) + +#define M_BCM1480_L2C_MGMT_DIRTY _SB_MAKEMASK1(20) +#define M_BCM1480_L2C_MGMT_VALID _SB_MAKEMASK1(21) + +#define S_BCM1480_L2C_MGMT_ECC_DIAG 22 +#define M_BCM1480_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2, S_BCM1480_L2C_MGMT_ECC_DIAG) +#define V_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG) +#define G_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG, M_BCM1480_L2C_MGMT_ECC_DIAG) + +#define A_BCM1480_L2C_MGMT_TAG_BASE 0x00D0000000 + +#define BCM1480_L2C_ENTRIES_PER_WAY 4096 +#define BCM1480_L2C_NUM_WAYS 8 + + +/* + * Level 2 Cache Tag register (Table 59) + */ + +#define S_BCM1480_L2C_TAG_MBZ 0 +#define M_BCM1480_L2C_TAG_MBZ _SB_MAKEMASK(5, S_BCM1480_L2C_TAG_MBZ) + +#define S_BCM1480_L2C_TAG_INDEX 5 +#define M_BCM1480_L2C_TAG_INDEX _SB_MAKEMASK(12, S_BCM1480_L2C_TAG_INDEX) +#define V_BCM1480_L2C_TAG_INDEX(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_INDEX) +#define G_BCM1480_L2C_TAG_INDEX(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_INDEX, M_BCM1480_L2C_TAG_INDEX) + +/* Note that index bit 16 is also tag bit 40 */ +#define S_BCM1480_L2C_TAG_TAG 17 +#define M_BCM1480_L2C_TAG_TAG _SB_MAKEMASK(23, S_BCM1480_L2C_TAG_TAG) +#define V_BCM1480_L2C_TAG_TAG(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_TAG) +#define G_BCM1480_L2C_TAG_TAG(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_TAG, M_BCM1480_L2C_TAG_TAG) + +#define S_BCM1480_L2C_TAG_ECC 40 +#define M_BCM1480_L2C_TAG_ECC _SB_MAKEMASK(6, S_BCM1480_L2C_TAG_ECC) +#define V_BCM1480_L2C_TAG_ECC(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_ECC) +#define G_BCM1480_L2C_TAG_ECC(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_ECC, M_BCM1480_L2C_TAG_ECC) + +#define S_BCM1480_L2C_TAG_WAY 46 +#define M_BCM1480_L2C_TAG_WAY _SB_MAKEMASK(3, S_BCM1480_L2C_TAG_WAY) +#define V_BCM1480_L2C_TAG_WAY(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_WAY) +#define G_BCM1480_L2C_TAG_WAY(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_WAY, M_BCM1480_L2C_TAG_WAY) + +#define M_BCM1480_L2C_TAG_DIRTY _SB_MAKEMASK1(49) +#define M_BCM1480_L2C_TAG_VALID _SB_MAKEMASK1(50) + +#define S_BCM1480_L2C_DATA_ECC 51 +#define M_BCM1480_L2C_DATA_ECC _SB_MAKEMASK(10, S_BCM1480_L2C_DATA_ECC) +#define V_BCM1480_L2C_DATA_ECC(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_DATA_ECC) +#define G_BCM1480_L2C_DATA_ECC(x) _SB_GETVALUE(x, S_BCM1480_L2C_DATA_ECC, M_BCM1480_L2C_DATA_ECC) + + +/* + * L2 Misc0 Value Register (Table 60) + */ + +#define S_BCM1480_L2C_MISC0_WAY_REMOTE 0 +#define M_BCM1480_L2C_MISC0_WAY_REMOTE _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_REMOTE) +#define G_BCM1480_L2C_MISC0_WAY_REMOTE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_REMOTE, M_BCM1480_L2C_MISC0_WAY_REMOTE) + +#define S_BCM1480_L2C_MISC0_WAY_LOCAL 8 +#define M_BCM1480_L2C_MISC0_WAY_LOCAL _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_LOCAL) +#define G_BCM1480_L2C_MISC0_WAY_LOCAL(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_LOCAL, M_BCM1480_L2C_MISC0_WAY_LOCAL) + +#define S_BCM1480_L2C_MISC0_WAY_ENABLE 16 +#define M_BCM1480_L2C_MISC0_WAY_ENABLE _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_ENABLE) +#define G_BCM1480_L2C_MISC0_WAY_ENABLE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_ENABLE, M_BCM1480_L2C_MISC0_WAY_ENABLE) + +#define S_BCM1480_L2C_MISC0_CACHE_DISABLE 24 +#define M_BCM1480_L2C_MISC0_CACHE_DISABLE _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_DISABLE) +#define G_BCM1480_L2C_MISC0_CACHE_DISABLE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_DISABLE, M_BCM1480_L2C_MISC0_CACHE_DISABLE) + +#define S_BCM1480_L2C_MISC0_CACHE_QUAD 26 +#define M_BCM1480_L2C_MISC0_CACHE_QUAD _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_QUAD) +#define G_BCM1480_L2C_MISC0_CACHE_QUAD(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_QUAD, M_BCM1480_L2C_MISC0_CACHE_QUAD) + +#define S_BCM1480_L2C_MISC0_MC_PRIORITY 30 +#define M_BCM1480_L2C_MISC0_MC_PRIORITY _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_MC_PRIORITY) + +#define S_BCM1480_L2C_MISC0_ECC_CLEANUP 31 +#define M_BCM1480_L2C_MISC0_ECC_CLEANUP _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_ECC_CLEANUP) + + +/* + * L2 Misc1 Value Register (Table 60) + */ + +#define S_BCM1480_L2C_MISC1_WAY_AGENT_0 0 +#define M_BCM1480_L2C_MISC1_WAY_AGENT_0 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_0) +#define G_BCM1480_L2C_MISC1_WAY_AGENT_0(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_0, M_BCM1480_L2C_MISC1_WAY_AGENT_0) + +#define S_BCM1480_L2C_MISC1_WAY_AGENT_1 8 +#define M_BCM1480_L2C_MISC1_WAY_AGENT_1 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_1) +#define G_BCM1480_L2C_MISC1_WAY_AGENT_1(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_1, M_BCM1480_L2C_MISC1_WAY_AGENT_1) + +#define S_BCM1480_L2C_MISC1_WAY_AGENT_2 16 +#define M_BCM1480_L2C_MISC1_WAY_AGENT_2 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_2) +#define G_BCM1480_L2C_MISC1_WAY_AGENT_2(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_2, M_BCM1480_L2C_MISC1_WAY_AGENT_2) + +#define S_BCM1480_L2C_MISC1_WAY_AGENT_3 24 +#define M_BCM1480_L2C_MISC1_WAY_AGENT_3 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_3) +#define G_BCM1480_L2C_MISC1_WAY_AGENT_3(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_3, M_BCM1480_L2C_MISC1_WAY_AGENT_3) + +#define S_BCM1480_L2C_MISC1_WAY_AGENT_4 32 +#define M_BCM1480_L2C_MISC1_WAY_AGENT_4 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_4) +#define G_BCM1480_L2C_MISC1_WAY_AGENT_4(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_4, M_BCM1480_L2C_MISC1_WAY_AGENT_4) + + +/* + * L2 Misc2 Value Register (Table 60) + */ + +#define S_BCM1480_L2C_MISC2_WAY_AGENT_8 0 +#define M_BCM1480_L2C_MISC2_WAY_AGENT_8 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_8) +#define G_BCM1480_L2C_MISC2_WAY_AGENT_8(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_8, M_BCM1480_L2C_MISC2_WAY_AGENT_8) + +#define S_BCM1480_L2C_MISC2_WAY_AGENT_9 8 +#define M_BCM1480_L2C_MISC2_WAY_AGENT_9 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_9) +#define G_BCM1480_L2C_MISC2_WAY_AGENT_9(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_9, M_BCM1480_L2C_MISC2_WAY_AGENT_9) + +#define S_BCM1480_L2C_MISC2_WAY_AGENT_A 16 +#define M_BCM1480_L2C_MISC2_WAY_AGENT_A _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_A) +#define G_BCM1480_L2C_MISC2_WAY_AGENT_A(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_A, M_BCM1480_L2C_MISC2_WAY_AGENT_A) + + +#endif /* _BCM1480_L2C_H */ diff --git a/arch/mips/include/asm/sibyte/bcm1480_mc.h b/arch/mips/include/asm/sibyte/bcm1480_mc.h new file mode 100644 index 000000000000..f26a41a82b59 --- /dev/null +++ b/arch/mips/include/asm/sibyte/bcm1480_mc.h @@ -0,0 +1,984 @@ +/* ********************************************************************* + * BCM1280/BCM1480 Board Support Package + * + * Memory Controller constants File: bcm1480_mc.h + * + * This module contains constants and macros useful for + * programming the memory controller. + * + * BCM1400 specification level: 1280-UM100-D1 (11/14/03 Review Copy) + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _BCM1480_MC_H +#define _BCM1480_MC_H + +#include "sb1250_defs.h" + +/* + * Memory Channel Configuration Register (Table 81) + */ + +#define S_BCM1480_MC_INTLV0 0 +#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0) +#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0) +#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0) +#define V_BCM1480_MC_INTLV0_DEFAULT V_BCM1480_MC_INTLV0(0) + +#define S_BCM1480_MC_INTLV1 8 +#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1) +#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1) +#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1) +#define V_BCM1480_MC_INTLV1_DEFAULT V_BCM1480_MC_INTLV1(0) + +#define S_BCM1480_MC_INTLV2 16 +#define M_BCM1480_MC_INTLV2 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV2) +#define V_BCM1480_MC_INTLV2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV2) +#define G_BCM1480_MC_INTLV2(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV2, M_BCM1480_MC_INTLV2) +#define V_BCM1480_MC_INTLV2_DEFAULT V_BCM1480_MC_INTLV2(0) + +#define S_BCM1480_MC_CS_MODE 32 +#define M_BCM1480_MC_CS_MODE _SB_MAKEMASK(8, S_BCM1480_MC_CS_MODE) +#define V_BCM1480_MC_CS_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS_MODE) +#define G_BCM1480_MC_CS_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_CS_MODE, M_BCM1480_MC_CS_MODE) +#define V_BCM1480_MC_CS_MODE_DEFAULT V_BCM1480_MC_CS_MODE(0) + +#define V_BCM1480_MC_CONFIG_DEFAULT (V_BCM1480_MC_INTLV0_DEFAULT | \ + V_BCM1480_MC_INTLV1_DEFAULT | \ + V_BCM1480_MC_INTLV2_DEFAULT | \ + V_BCM1480_MC_CS_MODE_DEFAULT) + +#define K_BCM1480_MC_CS01_MODE 0x03 +#define K_BCM1480_MC_CS02_MODE 0x05 +#define K_BCM1480_MC_CS0123_MODE 0x0F +#define K_BCM1480_MC_CS0246_MODE 0x55 +#define K_BCM1480_MC_CS0145_MODE 0x33 +#define K_BCM1480_MC_CS0167_MODE 0xC3 +#define K_BCM1480_MC_CSFULL_MODE 0xFF + +/* + * Chip Select Start Address Register (Table 82) + */ + +#define S_BCM1480_MC_CS0_START 0 +#define M_BCM1480_MC_CS0_START _SB_MAKEMASK(12, S_BCM1480_MC_CS0_START) +#define V_BCM1480_MC_CS0_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_START) +#define G_BCM1480_MC_CS0_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0_START, M_BCM1480_MC_CS0_START) + +#define S_BCM1480_MC_CS1_START 16 +#define M_BCM1480_MC_CS1_START _SB_MAKEMASK(12, S_BCM1480_MC_CS1_START) +#define V_BCM1480_MC_CS1_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_START) +#define G_BCM1480_MC_CS1_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS1_START, M_BCM1480_MC_CS1_START) + +#define S_BCM1480_MC_CS2_START 32 +#define M_BCM1480_MC_CS2_START _SB_MAKEMASK(12, S_BCM1480_MC_CS2_START) +#define V_BCM1480_MC_CS2_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_START) +#define G_BCM1480_MC_CS2_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS2_START, M_BCM1480_MC_CS2_START) + +#define S_BCM1480_MC_CS3_START 48 +#define M_BCM1480_MC_CS3_START _SB_MAKEMASK(12, S_BCM1480_MC_CS3_START) +#define V_BCM1480_MC_CS3_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_START) +#define G_BCM1480_MC_CS3_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS3_START, M_BCM1480_MC_CS3_START) + +/* + * Chip Select End Address Register (Table 83) + */ + +#define S_BCM1480_MC_CS0_END 0 +#define M_BCM1480_MC_CS0_END _SB_MAKEMASK(12, S_BCM1480_MC_CS0_END) +#define V_BCM1480_MC_CS0_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_END) +#define G_BCM1480_MC_CS0_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0_END, M_BCM1480_MC_CS0_END) + +#define S_BCM1480_MC_CS1_END 16 +#define M_BCM1480_MC_CS1_END _SB_MAKEMASK(12, S_BCM1480_MC_CS1_END) +#define V_BCM1480_MC_CS1_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_END) +#define G_BCM1480_MC_CS1_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS1_END, M_BCM1480_MC_CS1_END) + +#define S_BCM1480_MC_CS2_END 32 +#define M_BCM1480_MC_CS2_END _SB_MAKEMASK(12, S_BCM1480_MC_CS2_END) +#define V_BCM1480_MC_CS2_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_END) +#define G_BCM1480_MC_CS2_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS2_END, M_BCM1480_MC_CS2_END) + +#define S_BCM1480_MC_CS3_END 48 +#define M_BCM1480_MC_CS3_END _SB_MAKEMASK(12, S_BCM1480_MC_CS3_END) +#define V_BCM1480_MC_CS3_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_END) +#define G_BCM1480_MC_CS3_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS3_END, M_BCM1480_MC_CS3_END) + +/* + * Row Address Bit Select Register 0 (Table 84) + */ + +#define S_BCM1480_MC_ROW00 0 +#define M_BCM1480_MC_ROW00 _SB_MAKEMASK(6, S_BCM1480_MC_ROW00) +#define V_BCM1480_MC_ROW00(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW00) +#define G_BCM1480_MC_ROW00(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW00, M_BCM1480_MC_ROW00) + +#define S_BCM1480_MC_ROW01 8 +#define M_BCM1480_MC_ROW01 _SB_MAKEMASK(6, S_BCM1480_MC_ROW01) +#define V_BCM1480_MC_ROW01(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW01) +#define G_BCM1480_MC_ROW01(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW01, M_BCM1480_MC_ROW01) + +#define S_BCM1480_MC_ROW02 16 +#define M_BCM1480_MC_ROW02 _SB_MAKEMASK(6, S_BCM1480_MC_ROW02) +#define V_BCM1480_MC_ROW02(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW02) +#define G_BCM1480_MC_ROW02(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW02, M_BCM1480_MC_ROW02) + +#define S_BCM1480_MC_ROW03 24 +#define M_BCM1480_MC_ROW03 _SB_MAKEMASK(6, S_BCM1480_MC_ROW03) +#define V_BCM1480_MC_ROW03(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW03) +#define G_BCM1480_MC_ROW03(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW03, M_BCM1480_MC_ROW03) + +#define S_BCM1480_MC_ROW04 32 +#define M_BCM1480_MC_ROW04 _SB_MAKEMASK(6, S_BCM1480_MC_ROW04) +#define V_BCM1480_MC_ROW04(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW04) +#define G_BCM1480_MC_ROW04(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW04, M_BCM1480_MC_ROW04) + +#define S_BCM1480_MC_ROW05 40 +#define M_BCM1480_MC_ROW05 _SB_MAKEMASK(6, S_BCM1480_MC_ROW05) +#define V_BCM1480_MC_ROW05(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW05) +#define G_BCM1480_MC_ROW05(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW05, M_BCM1480_MC_ROW05) + +#define S_BCM1480_MC_ROW06 48 +#define M_BCM1480_MC_ROW06 _SB_MAKEMASK(6, S_BCM1480_MC_ROW06) +#define V_BCM1480_MC_ROW06(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW06) +#define G_BCM1480_MC_ROW06(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW06, M_BCM1480_MC_ROW06) + +#define S_BCM1480_MC_ROW07 56 +#define M_BCM1480_MC_ROW07 _SB_MAKEMASK(6, S_BCM1480_MC_ROW07) +#define V_BCM1480_MC_ROW07(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW07) +#define G_BCM1480_MC_ROW07(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW07, M_BCM1480_MC_ROW07) + +/* + * Row Address Bit Select Register 1 (Table 85) + */ + +#define S_BCM1480_MC_ROW08 0 +#define M_BCM1480_MC_ROW08 _SB_MAKEMASK(6, S_BCM1480_MC_ROW08) +#define V_BCM1480_MC_ROW08(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW08) +#define G_BCM1480_MC_ROW08(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW08, M_BCM1480_MC_ROW08) + +#define S_BCM1480_MC_ROW09 8 +#define M_BCM1480_MC_ROW09 _SB_MAKEMASK(6, S_BCM1480_MC_ROW09) +#define V_BCM1480_MC_ROW09(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW09) +#define G_BCM1480_MC_ROW09(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW09, M_BCM1480_MC_ROW09) + +#define S_BCM1480_MC_ROW10 16 +#define M_BCM1480_MC_ROW10 _SB_MAKEMASK(6, S_BCM1480_MC_ROW10) +#define V_BCM1480_MC_ROW10(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW10) +#define G_BCM1480_MC_ROW10(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW10, M_BCM1480_MC_ROW10) + +#define S_BCM1480_MC_ROW11 24 +#define M_BCM1480_MC_ROW11 _SB_MAKEMASK(6, S_BCM1480_MC_ROW11) +#define V_BCM1480_MC_ROW11(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW11) +#define G_BCM1480_MC_ROW11(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW11, M_BCM1480_MC_ROW11) + +#define S_BCM1480_MC_ROW12 32 +#define M_BCM1480_MC_ROW12 _SB_MAKEMASK(6, S_BCM1480_MC_ROW12) +#define V_BCM1480_MC_ROW12(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW12) +#define G_BCM1480_MC_ROW12(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW12, M_BCM1480_MC_ROW12) + +#define S_BCM1480_MC_ROW13 40 +#define M_BCM1480_MC_ROW13 _SB_MAKEMASK(6, S_BCM1480_MC_ROW13) +#define V_BCM1480_MC_ROW13(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW13) +#define G_BCM1480_MC_ROW13(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW13, M_BCM1480_MC_ROW13) + +#define S_BCM1480_MC_ROW14 48 +#define M_BCM1480_MC_ROW14 _SB_MAKEMASK(6, S_BCM1480_MC_ROW14) +#define V_BCM1480_MC_ROW14(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW14) +#define G_BCM1480_MC_ROW14(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW14, M_BCM1480_MC_ROW14) + +#define K_BCM1480_MC_ROWX_BIT_SPACING 8 + +/* + * Column Address Bit Select Register 0 (Table 86) + */ + +#define S_BCM1480_MC_COL00 0 +#define M_BCM1480_MC_COL00 _SB_MAKEMASK(6, S_BCM1480_MC_COL00) +#define V_BCM1480_MC_COL00(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL00) +#define G_BCM1480_MC_COL00(x) _SB_GETVALUE(x, S_BCM1480_MC_COL00, M_BCM1480_MC_COL00) + +#define S_BCM1480_MC_COL01 8 +#define M_BCM1480_MC_COL01 _SB_MAKEMASK(6, S_BCM1480_MC_COL01) +#define V_BCM1480_MC_COL01(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL01) +#define G_BCM1480_MC_COL01(x) _SB_GETVALUE(x, S_BCM1480_MC_COL01, M_BCM1480_MC_COL01) + +#define S_BCM1480_MC_COL02 16 +#define M_BCM1480_MC_COL02 _SB_MAKEMASK(6, S_BCM1480_MC_COL02) +#define V_BCM1480_MC_COL02(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL02) +#define G_BCM1480_MC_COL02(x) _SB_GETVALUE(x, S_BCM1480_MC_COL02, M_BCM1480_MC_COL02) + +#define S_BCM1480_MC_COL03 24 +#define M_BCM1480_MC_COL03 _SB_MAKEMASK(6, S_BCM1480_MC_COL03) +#define V_BCM1480_MC_COL03(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL03) +#define G_BCM1480_MC_COL03(x) _SB_GETVALUE(x, S_BCM1480_MC_COL03, M_BCM1480_MC_COL03) + +#define S_BCM1480_MC_COL04 32 +#define M_BCM1480_MC_COL04 _SB_MAKEMASK(6, S_BCM1480_MC_COL04) +#define V_BCM1480_MC_COL04(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL04) +#define G_BCM1480_MC_COL04(x) _SB_GETVALUE(x, S_BCM1480_MC_COL04, M_BCM1480_MC_COL04) + +#define S_BCM1480_MC_COL05 40 +#define M_BCM1480_MC_COL05 _SB_MAKEMASK(6, S_BCM1480_MC_COL05) +#define V_BCM1480_MC_COL05(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL05) +#define G_BCM1480_MC_COL05(x) _SB_GETVALUE(x, S_BCM1480_MC_COL05, M_BCM1480_MC_COL05) + +#define S_BCM1480_MC_COL06 48 +#define M_BCM1480_MC_COL06 _SB_MAKEMASK(6, S_BCM1480_MC_COL06) +#define V_BCM1480_MC_COL06(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL06) +#define G_BCM1480_MC_COL06(x) _SB_GETVALUE(x, S_BCM1480_MC_COL06, M_BCM1480_MC_COL06) + +#define S_BCM1480_MC_COL07 56 +#define M_BCM1480_MC_COL07 _SB_MAKEMASK(6, S_BCM1480_MC_COL07) +#define V_BCM1480_MC_COL07(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL07) +#define G_BCM1480_MC_COL07(x) _SB_GETVALUE(x, S_BCM1480_MC_COL07, M_BCM1480_MC_COL07) + +/* + * Column Address Bit Select Register 1 (Table 87) + */ + +#define S_BCM1480_MC_COL08 0 +#define M_BCM1480_MC_COL08 _SB_MAKEMASK(6, S_BCM1480_MC_COL08) +#define V_BCM1480_MC_COL08(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL08) +#define G_BCM1480_MC_COL08(x) _SB_GETVALUE(x, S_BCM1480_MC_COL08, M_BCM1480_MC_COL08) + +#define S_BCM1480_MC_COL09 8 +#define M_BCM1480_MC_COL09 _SB_MAKEMASK(6, S_BCM1480_MC_COL09) +#define V_BCM1480_MC_COL09(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL09) +#define G_BCM1480_MC_COL09(x) _SB_GETVALUE(x, S_BCM1480_MC_COL09, M_BCM1480_MC_COL09) + +#define S_BCM1480_MC_COL10 16 /* not a valid position, must be prog as 0 */ + +#define S_BCM1480_MC_COL11 24 +#define M_BCM1480_MC_COL11 _SB_MAKEMASK(6, S_BCM1480_MC_COL11) +#define V_BCM1480_MC_COL11(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL11) +#define G_BCM1480_MC_COL11(x) _SB_GETVALUE(x, S_BCM1480_MC_COL11, M_BCM1480_MC_COL11) + +#define S_BCM1480_MC_COL12 32 +#define M_BCM1480_MC_COL12 _SB_MAKEMASK(6, S_BCM1480_MC_COL12) +#define V_BCM1480_MC_COL12(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL12) +#define G_BCM1480_MC_COL12(x) _SB_GETVALUE(x, S_BCM1480_MC_COL12, M_BCM1480_MC_COL12) + +#define S_BCM1480_MC_COL13 40 +#define M_BCM1480_MC_COL13 _SB_MAKEMASK(6, S_BCM1480_MC_COL13) +#define V_BCM1480_MC_COL13(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL13) +#define G_BCM1480_MC_COL13(x) _SB_GETVALUE(x, S_BCM1480_MC_COL13, M_BCM1480_MC_COL13) + +#define S_BCM1480_MC_COL14 48 +#define M_BCM1480_MC_COL14 _SB_MAKEMASK(6, S_BCM1480_MC_COL14) +#define V_BCM1480_MC_COL14(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL14) +#define G_BCM1480_MC_COL14(x) _SB_GETVALUE(x, S_BCM1480_MC_COL14, M_BCM1480_MC_COL14) + +#define K_BCM1480_MC_COLX_BIT_SPACING 8 + +/* + * CS0 and CS1 Bank Address Bit Select Register (Table 88) + */ + +#define S_BCM1480_MC_CS01_BANK0 0 +#define M_BCM1480_MC_CS01_BANK0 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK0) +#define V_BCM1480_MC_CS01_BANK0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK0) +#define G_BCM1480_MC_CS01_BANK0(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK0, M_BCM1480_MC_CS01_BANK0) + +#define S_BCM1480_MC_CS01_BANK1 8 +#define M_BCM1480_MC_CS01_BANK1 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK1) +#define V_BCM1480_MC_CS01_BANK1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK1) +#define G_BCM1480_MC_CS01_BANK1(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK1, M_BCM1480_MC_CS01_BANK1) + +#define S_BCM1480_MC_CS01_BANK2 16 +#define M_BCM1480_MC_CS01_BANK2 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK2) +#define V_BCM1480_MC_CS01_BANK2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK2) +#define G_BCM1480_MC_CS01_BANK2(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK2, M_BCM1480_MC_CS01_BANK2) + +/* + * CS2 and CS3 Bank Address Bit Select Register (Table 89) + */ + +#define S_BCM1480_MC_CS23_BANK0 0 +#define M_BCM1480_MC_CS23_BANK0 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK0) +#define V_BCM1480_MC_CS23_BANK0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK0) +#define G_BCM1480_MC_CS23_BANK0(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK0, M_BCM1480_MC_CS23_BANK0) + +#define S_BCM1480_MC_CS23_BANK1 8 +#define M_BCM1480_MC_CS23_BANK1 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK1) +#define V_BCM1480_MC_CS23_BANK1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK1) +#define G_BCM1480_MC_CS23_BANK1(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK1, M_BCM1480_MC_CS23_BANK1) + +#define S_BCM1480_MC_CS23_BANK2 16 +#define M_BCM1480_MC_CS23_BANK2 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK2) +#define V_BCM1480_MC_CS23_BANK2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK2) +#define G_BCM1480_MC_CS23_BANK2(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK2, M_BCM1480_MC_CS23_BANK2) + +#define K_BCM1480_MC_CSXX_BANKX_BIT_SPACING 8 + +/* + * DRAM Command Register (Table 90) + */ + +#define S_BCM1480_MC_COMMAND 0 +#define M_BCM1480_MC_COMMAND _SB_MAKEMASK(4, S_BCM1480_MC_COMMAND) +#define V_BCM1480_MC_COMMAND(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COMMAND) +#define G_BCM1480_MC_COMMAND(x) _SB_GETVALUE(x, S_BCM1480_MC_COMMAND, M_BCM1480_MC_COMMAND) + +#define K_BCM1480_MC_COMMAND_EMRS 0 +#define K_BCM1480_MC_COMMAND_MRS 1 +#define K_BCM1480_MC_COMMAND_PRE 2 +#define K_BCM1480_MC_COMMAND_AR 3 +#define K_BCM1480_MC_COMMAND_SETRFSH 4 +#define K_BCM1480_MC_COMMAND_CLRRFSH 5 +#define K_BCM1480_MC_COMMAND_SETPWRDN 6 +#define K_BCM1480_MC_COMMAND_CLRPWRDN 7 + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define K_BCM1480_MC_COMMAND_EMRS2 8 +#define K_BCM1480_MC_COMMAND_EMRS3 9 +#define K_BCM1480_MC_COMMAND_ENABLE_MCLK 10 +#define K_BCM1480_MC_COMMAND_DISABLE_MCLK 11 +#endif + +#define V_BCM1480_MC_COMMAND_EMRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS) +#define V_BCM1480_MC_COMMAND_MRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_MRS) +#define V_BCM1480_MC_COMMAND_PRE V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_PRE) +#define V_BCM1480_MC_COMMAND_AR V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_AR) +#define V_BCM1480_MC_COMMAND_SETRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETRFSH) +#define V_BCM1480_MC_COMMAND_CLRRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRRFSH) +#define V_BCM1480_MC_COMMAND_SETPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETPWRDN) +#define V_BCM1480_MC_COMMAND_CLRPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRPWRDN) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define V_BCM1480_MC_COMMAND_EMRS2 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS2) +#define V_BCM1480_MC_COMMAND_EMRS3 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS3) +#define V_BCM1480_MC_COMMAND_ENABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_ENABLE_MCLK) +#define V_BCM1480_MC_COMMAND_DISABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_DISABLE_MCLK) +#endif + +#define S_BCM1480_MC_CS0 4 +#define M_BCM1480_MC_CS0 _SB_MAKEMASK1(4) +#define M_BCM1480_MC_CS1 _SB_MAKEMASK1(5) +#define M_BCM1480_MC_CS2 _SB_MAKEMASK1(6) +#define M_BCM1480_MC_CS3 _SB_MAKEMASK1(7) +#define M_BCM1480_MC_CS4 _SB_MAKEMASK1(8) +#define M_BCM1480_MC_CS5 _SB_MAKEMASK1(9) +#define M_BCM1480_MC_CS6 _SB_MAKEMASK1(10) +#define M_BCM1480_MC_CS7 _SB_MAKEMASK1(11) + +#define M_BCM1480_MC_CS _SB_MAKEMASK(8, S_BCM1480_MC_CS0) +#define V_BCM1480_MC_CS(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0) +#define G_BCM1480_MC_CS(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0, M_BCM1480_MC_CS0) + +#define M_BCM1480_MC_CMD_ACTIVE _SB_MAKEMASK1(16) + +/* + * DRAM Mode Register (Table 91) + */ + +#define S_BCM1480_MC_EMODE 0 +#define M_BCM1480_MC_EMODE _SB_MAKEMASK(15, S_BCM1480_MC_EMODE) +#define V_BCM1480_MC_EMODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_EMODE) +#define G_BCM1480_MC_EMODE(x) _SB_GETVALUE(x, S_BCM1480_MC_EMODE, M_BCM1480_MC_EMODE) +#define V_BCM1480_MC_EMODE_DEFAULT V_BCM1480_MC_EMODE(0) + +#define S_BCM1480_MC_MODE 16 +#define M_BCM1480_MC_MODE _SB_MAKEMASK(15, S_BCM1480_MC_MODE) +#define V_BCM1480_MC_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_MODE) +#define G_BCM1480_MC_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_MODE, M_BCM1480_MC_MODE) +#define V_BCM1480_MC_MODE_DEFAULT V_BCM1480_MC_MODE(0) + +#define S_BCM1480_MC_DRAM_TYPE 32 +#define M_BCM1480_MC_DRAM_TYPE _SB_MAKEMASK(4, S_BCM1480_MC_DRAM_TYPE) +#define V_BCM1480_MC_DRAM_TYPE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DRAM_TYPE) +#define G_BCM1480_MC_DRAM_TYPE(x) _SB_GETVALUE(x, S_BCM1480_MC_DRAM_TYPE, M_BCM1480_MC_DRAM_TYPE) + +#define K_BCM1480_MC_DRAM_TYPE_JEDEC 0 +#define K_BCM1480_MC_DRAM_TYPE_FCRAM 1 + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define K_BCM1480_MC_DRAM_TYPE_DDR2 2 +#endif + +#define K_BCM1480_MC_DRAM_TYPE_DDR2_PASS1 0 + +#define V_BCM1480_MC_DRAM_TYPE_JEDEC V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC) +#define V_BCM1480_MC_DRAM_TYPE_FCRAM V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define V_BCM1480_MC_DRAM_TYPE_DDR2 V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_DDR2) +#endif + +#define M_BCM1480_MC_GANGED _SB_MAKEMASK1(36) +#define M_BCM1480_MC_BY9_INTF _SB_MAKEMASK1(37) +#define M_BCM1480_MC_FORCE_ECC64 _SB_MAKEMASK1(38) +#define M_BCM1480_MC_ECC_DISABLE _SB_MAKEMASK1(39) + +#define S_BCM1480_MC_PG_POLICY 40 +#define M_BCM1480_MC_PG_POLICY _SB_MAKEMASK(2, S_BCM1480_MC_PG_POLICY) +#define V_BCM1480_MC_PG_POLICY(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PG_POLICY) +#define G_BCM1480_MC_PG_POLICY(x) _SB_GETVALUE(x, S_BCM1480_MC_PG_POLICY, M_BCM1480_MC_PG_POLICY) + +#define K_BCM1480_MC_PG_POLICY_CLOSED 0 +#define K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK 1 + +#define V_BCM1480_MC_PG_POLICY_CLOSED V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CLOSED) +#define V_BCM1480_MC_PG_POLICY_CAS_TIME_CHK V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define M_BCM1480_MC_2T_CMD _SB_MAKEMASK1(42) +#define M_BCM1480_MC_ECC_COR_DIS _SB_MAKEMASK1(43) +#endif + +#define V_BCM1480_MC_DRAMMODE_DEFAULT V_BCM1480_MC_EMODE_DEFAULT | V_BCM1480_MC_MODE_DEFAULT | V_BCM1480_MC_DRAM_TYPE_JEDEC | \ + V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK) + +/* + * Memory Clock Configuration Register (Table 92) + */ + +#define S_BCM1480_MC_CLK_RATIO 0 +#define M_BCM1480_MC_CLK_RATIO _SB_MAKEMASK(6, S_BCM1480_MC_CLK_RATIO) +#define V_BCM1480_MC_CLK_RATIO(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CLK_RATIO) +#define G_BCM1480_MC_CLK_RATIO(x) _SB_GETVALUE(x, S_BCM1480_MC_CLK_RATIO, M_BCM1480_MC_CLK_RATIO) + +#define V_BCM1480_MC_CLK_RATIO_DEFAULT V_BCM1480_MC_CLK_RATIO(10) + +#define S_BCM1480_MC_REF_RATE 8 +#define M_BCM1480_MC_REF_RATE _SB_MAKEMASK(8, S_BCM1480_MC_REF_RATE) +#define V_BCM1480_MC_REF_RATE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_REF_RATE) +#define G_BCM1480_MC_REF_RATE(x) _SB_GETVALUE(x, S_BCM1480_MC_REF_RATE, M_BCM1480_MC_REF_RATE) + +#define K_BCM1480_MC_REF_RATE_100MHz 0x31 +#define K_BCM1480_MC_REF_RATE_200MHz 0x62 +#define K_BCM1480_MC_REF_RATE_400MHz 0xC4 + +#define V_BCM1480_MC_REF_RATE_100MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_100MHz) +#define V_BCM1480_MC_REF_RATE_200MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_200MHz) +#define V_BCM1480_MC_REF_RATE_400MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_400MHz) +#define V_BCM1480_MC_REF_RATE_DEFAULT V_BCM1480_MC_REF_RATE_400MHz + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define M_BCM1480_MC_AUTO_REF_DIS _SB_MAKEMASK1(16) +#endif + +/* + * ODT Register (Table 99) + */ + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define M_BCM1480_MC_RD_ODT0_CS0 _SB_MAKEMASK1(0) +#define M_BCM1480_MC_RD_ODT0_CS2 _SB_MAKEMASK1(1) +#define M_BCM1480_MC_RD_ODT0_CS4 _SB_MAKEMASK1(2) +#define M_BCM1480_MC_RD_ODT0_CS6 _SB_MAKEMASK1(3) +#define M_BCM1480_MC_WR_ODT0_CS0 _SB_MAKEMASK1(4) +#define M_BCM1480_MC_WR_ODT0_CS2 _SB_MAKEMASK1(5) +#define M_BCM1480_MC_WR_ODT0_CS4 _SB_MAKEMASK1(6) +#define M_BCM1480_MC_WR_ODT0_CS6 _SB_MAKEMASK1(7) +#define M_BCM1480_MC_RD_ODT2_CS0 _SB_MAKEMASK1(8) +#define M_BCM1480_MC_RD_ODT2_CS2 _SB_MAKEMASK1(9) +#define M_BCM1480_MC_RD_ODT2_CS4 _SB_MAKEMASK1(10) +#define M_BCM1480_MC_RD_ODT2_CS6 _SB_MAKEMASK1(11) +#define M_BCM1480_MC_WR_ODT2_CS0 _SB_MAKEMASK1(12) +#define M_BCM1480_MC_WR_ODT2_CS2 _SB_MAKEMASK1(13) +#define M_BCM1480_MC_WR_ODT2_CS4 _SB_MAKEMASK1(14) +#define M_BCM1480_MC_WR_ODT2_CS6 _SB_MAKEMASK1(15) +#define M_BCM1480_MC_RD_ODT4_CS0 _SB_MAKEMASK1(16) +#define M_BCM1480_MC_RD_ODT4_CS2 _SB_MAKEMASK1(17) +#define M_BCM1480_MC_RD_ODT4_CS4 _SB_MAKEMASK1(18) +#define M_BCM1480_MC_RD_ODT4_CS6 _SB_MAKEMASK1(19) +#define M_BCM1480_MC_WR_ODT4_CS0 _SB_MAKEMASK1(20) +#define M_BCM1480_MC_WR_ODT4_CS2 _SB_MAKEMASK1(21) +#define M_BCM1480_MC_WR_ODT4_CS4 _SB_MAKEMASK1(22) +#define M_BCM1480_MC_WR_ODT4_CS6 _SB_MAKEMASK1(23) +#define M_BCM1480_MC_RD_ODT6_CS0 _SB_MAKEMASK1(24) +#define M_BCM1480_MC_RD_ODT6_CS2 _SB_MAKEMASK1(25) +#define M_BCM1480_MC_RD_ODT6_CS4 _SB_MAKEMASK1(26) +#define M_BCM1480_MC_RD_ODT6_CS6 _SB_MAKEMASK1(27) +#define M_BCM1480_MC_WR_ODT6_CS0 _SB_MAKEMASK1(28) +#define M_BCM1480_MC_WR_ODT6_CS2 _SB_MAKEMASK1(29) +#define M_BCM1480_MC_WR_ODT6_CS4 _SB_MAKEMASK1(30) +#define M_BCM1480_MC_WR_ODT6_CS6 _SB_MAKEMASK1(31) + +#define M_BCM1480_MC_CS_ODD_ODT_EN _SB_MAKEMASK1(32) + +#define S_BCM1480_MC_ODT0 0 +#define M_BCM1480_MC_ODT0 _SB_MAKEMASK(8, S_BCM1480_MC_ODT0) +#define V_BCM1480_MC_ODT0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT0) + +#define S_BCM1480_MC_ODT2 8 +#define M_BCM1480_MC_ODT2 _SB_MAKEMASK(8, S_BCM1480_MC_ODT2) +#define V_BCM1480_MC_ODT2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT2) + +#define S_BCM1480_MC_ODT4 16 +#define M_BCM1480_MC_ODT4 _SB_MAKEMASK(8, S_BCM1480_MC_ODT4) +#define V_BCM1480_MC_ODT4(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT4) + +#define S_BCM1480_MC_ODT6 24 +#define M_BCM1480_MC_ODT6 _SB_MAKEMASK(8, S_BCM1480_MC_ODT6) +#define V_BCM1480_MC_ODT6(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT6) +#endif + +/* + * Memory DLL Configuration Register (Table 93) + */ + +#define S_BCM1480_MC_ADDR_COARSE_ADJ 0 +#define M_BCM1480_MC_ADDR_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_ADDR_COARSE_ADJ) +#define V_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ) +#define G_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ, M_BCM1480_MC_ADDR_COARSE_ADJ) +#define V_BCM1480_MC_ADDR_COARSE_ADJ_DEFAULT V_BCM1480_MC_ADDR_COARSE_ADJ(0x0) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_ADDR_FREQ_RANGE 8 +#define M_BCM1480_MC_ADDR_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FREQ_RANGE) +#define V_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE) +#define G_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE, M_BCM1480_MC_ADDR_FREQ_RANGE) +#define V_BCM1480_MC_ADDR_FREQ_RANGE_DEFAULT V_BCM1480_MC_ADDR_FREQ_RANGE(0x4) +#endif + +#define S_BCM1480_MC_ADDR_FINE_ADJ 8 +#define M_BCM1480_MC_ADDR_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FINE_ADJ) +#define V_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ) +#define G_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ, M_BCM1480_MC_ADDR_FINE_ADJ) +#define V_BCM1480_MC_ADDR_FINE_ADJ_DEFAULT V_BCM1480_MC_ADDR_FINE_ADJ(0x8) + +#define S_BCM1480_MC_DQI_COARSE_ADJ 16 +#define M_BCM1480_MC_DQI_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_DQI_COARSE_ADJ) +#define V_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ) +#define G_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ, M_BCM1480_MC_DQI_COARSE_ADJ) +#define V_BCM1480_MC_DQI_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQI_COARSE_ADJ(0x0) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_DQI_FREQ_RANGE 24 +#define M_BCM1480_MC_DQI_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FREQ_RANGE) +#define V_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE) +#define G_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE, M_BCM1480_MC_DQI_FREQ_RANGE) +#define V_BCM1480_MC_DQI_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQI_FREQ_RANGE(0x4) +#endif + +#define S_BCM1480_MC_DQI_FINE_ADJ 24 +#define M_BCM1480_MC_DQI_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FINE_ADJ) +#define V_BCM1480_MC_DQI_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ) +#define G_BCM1480_MC_DQI_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ, M_BCM1480_MC_DQI_FINE_ADJ) +#define V_BCM1480_MC_DQI_FINE_ADJ_DEFAULT V_BCM1480_MC_DQI_FINE_ADJ(0x8) + +#define S_BCM1480_MC_DQO_COARSE_ADJ 32 +#define M_BCM1480_MC_DQO_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_DQO_COARSE_ADJ) +#define V_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ) +#define G_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ, M_BCM1480_MC_DQO_COARSE_ADJ) +#define V_BCM1480_MC_DQO_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQO_COARSE_ADJ(0x0) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_DQO_FREQ_RANGE 40 +#define M_BCM1480_MC_DQO_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FREQ_RANGE) +#define V_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE) +#define G_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE, M_BCM1480_MC_DQO_FREQ_RANGE) +#define V_BCM1480_MC_DQO_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQO_FREQ_RANGE(0x4) +#endif + +#define S_BCM1480_MC_DQO_FINE_ADJ 40 +#define M_BCM1480_MC_DQO_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FINE_ADJ) +#define V_BCM1480_MC_DQO_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ) +#define G_BCM1480_MC_DQO_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ, M_BCM1480_MC_DQO_FINE_ADJ) +#define V_BCM1480_MC_DQO_FINE_ADJ_DEFAULT V_BCM1480_MC_DQO_FINE_ADJ(0x8) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_DLL_PDSEL 44 +#define M_BCM1480_MC_DLL_PDSEL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_PDSEL) +#define V_BCM1480_MC_DLL_PDSEL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_PDSEL) +#define G_BCM1480_MC_DLL_PDSEL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_PDSEL, M_BCM1480_MC_DLL_PDSEL) +#define V_BCM1480_MC_DLL_DEFAULT_PDSEL V_BCM1480_MC_DLL_PDSEL(0x0) + +#define M_BCM1480_MC_DLL_REGBYPASS _SB_MAKEMASK1(46) +#define M_BCM1480_MC_DQO_SHIFT _SB_MAKEMASK1(47) +#endif + +#define S_BCM1480_MC_DLL_DEFAULT 48 +#define M_BCM1480_MC_DLL_DEFAULT _SB_MAKEMASK(6, S_BCM1480_MC_DLL_DEFAULT) +#define V_BCM1480_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_DEFAULT) +#define G_BCM1480_MC_DLL_DEFAULT(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_DEFAULT, M_BCM1480_MC_DLL_DEFAULT) +#define V_BCM1480_MC_DLL_DEFAULT_DEFAULT V_BCM1480_MC_DLL_DEFAULT(0x10) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_DLL_REGCTRL 54 +#define M_BCM1480_MC_DLL_REGCTRL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_REGCTRL) +#define V_BCM1480_MC_DLL_REGCTRL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_REGCTRL) +#define G_BCM1480_MC_DLL_REGCTRL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_REGCTRL, M_BCM1480_MC_DLL_REGCTRL) +#define V_BCM1480_MC_DLL_DEFAULT_REGCTRL V_BCM1480_MC_DLL_REGCTRL(0x0) +#endif + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_DLL_FREQ_RANGE 56 +#define M_BCM1480_MC_DLL_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DLL_FREQ_RANGE) +#define V_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE) +#define G_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE, M_BCM1480_MC_DLL_FREQ_RANGE) +#define V_BCM1480_MC_DLL_FREQ_RANGE_DEFAULT V_BCM1480_MC_DLL_FREQ_RANGE(0x4) +#endif + +#define S_BCM1480_MC_DLL_STEP_SIZE 56 +#define M_BCM1480_MC_DLL_STEP_SIZE _SB_MAKEMASK(4, S_BCM1480_MC_DLL_STEP_SIZE) +#define V_BCM1480_MC_DLL_STEP_SIZE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE) +#define G_BCM1480_MC_DLL_STEP_SIZE(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE, M_BCM1480_MC_DLL_STEP_SIZE) +#define V_BCM1480_MC_DLL_STEP_SIZE_DEFAULT V_BCM1480_MC_DLL_STEP_SIZE(0x8) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_DLL_BGCTRL 60 +#define M_BCM1480_MC_DLL_BGCTRL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_BGCTRL) +#define V_BCM1480_MC_DLL_BGCTRL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_BGCTRL) +#define G_BCM1480_MC_DLL_BGCTRL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_BGCTRL, M_BCM1480_MC_DLL_BGCTRL) +#define V_BCM1480_MC_DLL_DEFAULT_BGCTRL V_BCM1480_MC_DLL_BGCTRL(0x0) +#endif + +#define M_BCM1480_MC_DLL_BYPASS _SB_MAKEMASK1(63) + +/* + * Memory Drive Configuration Register (Table 94) + */ + +#define S_BCM1480_MC_RTT_BYP_PULLDOWN 0 +#define M_BCM1480_MC_RTT_BYP_PULLDOWN _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLDOWN) +#define V_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN) +#define G_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN, M_BCM1480_MC_RTT_BYP_PULLDOWN) + +#define S_BCM1480_MC_RTT_BYP_PULLUP 6 +#define M_BCM1480_MC_RTT_BYP_PULLUP _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLUP) +#define V_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP) +#define G_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP, M_BCM1480_MC_RTT_BYP_PULLUP) + +#define M_BCM1480_MC_RTT_BYPASS _SB_MAKEMASK1(8) +#define M_BCM1480_MC_RTT_COMP_MOV_AVG _SB_MAKEMASK1(9) + +#define S_BCM1480_MC_PVT_BYP_C1_PULLDOWN 10 +#define M_BCM1480_MC_PVT_BYP_C1_PULLDOWN _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN) +#define V_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN) +#define G_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN, M_BCM1480_MC_PVT_BYP_C1_PULLDOWN) + +#define S_BCM1480_MC_PVT_BYP_C1_PULLUP 15 +#define M_BCM1480_MC_PVT_BYP_C1_PULLUP _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLUP) +#define V_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP) +#define G_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP, M_BCM1480_MC_PVT_BYP_C1_PULLUP) + +#define S_BCM1480_MC_PVT_BYP_C2_PULLDOWN 20 +#define M_BCM1480_MC_PVT_BYP_C2_PULLDOWN _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN) +#define V_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN) +#define G_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN, M_BCM1480_MC_PVT_BYP_C2_PULLDOWN) + +#define S_BCM1480_MC_PVT_BYP_C2_PULLUP 25 +#define M_BCM1480_MC_PVT_BYP_C2_PULLUP _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLUP) +#define V_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP) +#define G_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP, M_BCM1480_MC_PVT_BYP_C2_PULLUP) + +#define M_BCM1480_MC_PVT_BYPASS _SB_MAKEMASK1(30) +#define M_BCM1480_MC_PVT_COMP_MOV_AVG _SB_MAKEMASK1(31) + +#define M_BCM1480_MC_CLK_CLASS _SB_MAKEMASK1(34) +#define M_BCM1480_MC_DATA_CLASS _SB_MAKEMASK1(35) +#define M_BCM1480_MC_ADDR_CLASS _SB_MAKEMASK1(36) + +#define M_BCM1480_MC_DQ_ODT_75 _SB_MAKEMASK1(37) +#define M_BCM1480_MC_DQ_ODT_150 _SB_MAKEMASK1(38) +#define M_BCM1480_MC_DQS_ODT_75 _SB_MAKEMASK1(39) +#define M_BCM1480_MC_DQS_ODT_150 _SB_MAKEMASK1(40) +#define M_BCM1480_MC_DQS_DIFF _SB_MAKEMASK1(41) + +/* + * ECC Test Data Register (Table 95) + */ + +#define S_BCM1480_MC_DATA_INVERT 0 +#define M_DATA_ECC_INVERT _SB_MAKEMASK(64, S_BCM1480_MC_ECC_INVERT) + +/* + * ECC Test ECC Register (Table 96) + */ + +#define S_BCM1480_MC_ECC_INVERT 0 +#define M_BCM1480_MC_ECC_INVERT _SB_MAKEMASK(8, S_BCM1480_MC_ECC_INVERT) + +/* + * SDRAM Timing Register (Table 97) + */ + +#define S_BCM1480_MC_tRCD 0 +#define M_BCM1480_MC_tRCD _SB_MAKEMASK(4, S_BCM1480_MC_tRCD) +#define V_BCM1480_MC_tRCD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCD) +#define G_BCM1480_MC_tRCD(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCD, M_BCM1480_MC_tRCD) +#define K_BCM1480_MC_tRCD_DEFAULT 3 +#define V_BCM1480_MC_tRCD_DEFAULT V_BCM1480_MC_tRCD(K_BCM1480_MC_tRCD_DEFAULT) + +#define S_BCM1480_MC_tCL 4 +#define M_BCM1480_MC_tCL _SB_MAKEMASK(4, S_BCM1480_MC_tCL) +#define V_BCM1480_MC_tCL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tCL) +#define G_BCM1480_MC_tCL(x) _SB_GETVALUE(x, S_BCM1480_MC_tCL, M_BCM1480_MC_tCL) +#define K_BCM1480_MC_tCL_DEFAULT 2 +#define V_BCM1480_MC_tCL_DEFAULT V_BCM1480_MC_tCL(K_BCM1480_MC_tCL_DEFAULT) + +#define M_BCM1480_MC_tCrDh _SB_MAKEMASK1(8) + +#define S_BCM1480_MC_tWR 9 +#define M_BCM1480_MC_tWR _SB_MAKEMASK(3, S_BCM1480_MC_tWR) +#define V_BCM1480_MC_tWR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tWR) +#define G_BCM1480_MC_tWR(x) _SB_GETVALUE(x, S_BCM1480_MC_tWR, M_BCM1480_MC_tWR) +#define K_BCM1480_MC_tWR_DEFAULT 2 +#define V_BCM1480_MC_tWR_DEFAULT V_BCM1480_MC_tWR(K_BCM1480_MC_tWR_DEFAULT) + +#define S_BCM1480_MC_tCwD 12 +#define M_BCM1480_MC_tCwD _SB_MAKEMASK(4, S_BCM1480_MC_tCwD) +#define V_BCM1480_MC_tCwD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tCwD) +#define G_BCM1480_MC_tCwD(x) _SB_GETVALUE(x, S_BCM1480_MC_tCwD, M_BCM1480_MC_tCwD) +#define K_BCM1480_MC_tCwD_DEFAULT 1 +#define V_BCM1480_MC_tCwD_DEFAULT V_BCM1480_MC_tCwD(K_BCM1480_MC_tCwD_DEFAULT) + +#define S_BCM1480_MC_tRP 16 +#define M_BCM1480_MC_tRP _SB_MAKEMASK(4, S_BCM1480_MC_tRP) +#define V_BCM1480_MC_tRP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRP) +#define G_BCM1480_MC_tRP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRP, M_BCM1480_MC_tRP) +#define K_BCM1480_MC_tRP_DEFAULT 4 +#define V_BCM1480_MC_tRP_DEFAULT V_BCM1480_MC_tRP(K_BCM1480_MC_tRP_DEFAULT) + +#define S_BCM1480_MC_tRRD 20 +#define M_BCM1480_MC_tRRD _SB_MAKEMASK(4, S_BCM1480_MC_tRRD) +#define V_BCM1480_MC_tRRD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRRD) +#define G_BCM1480_MC_tRRD(x) _SB_GETVALUE(x, S_BCM1480_MC_tRRD, M_BCM1480_MC_tRRD) +#define K_BCM1480_MC_tRRD_DEFAULT 2 +#define V_BCM1480_MC_tRRD_DEFAULT V_BCM1480_MC_tRRD(K_BCM1480_MC_tRRD_DEFAULT) + +#define S_BCM1480_MC_tRCw 24 +#define M_BCM1480_MC_tRCw _SB_MAKEMASK(5, S_BCM1480_MC_tRCw) +#define V_BCM1480_MC_tRCw(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCw) +#define G_BCM1480_MC_tRCw(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCw, M_BCM1480_MC_tRCw) +#define K_BCM1480_MC_tRCw_DEFAULT 10 +#define V_BCM1480_MC_tRCw_DEFAULT V_BCM1480_MC_tRCw(K_BCM1480_MC_tRCw_DEFAULT) + +#define S_BCM1480_MC_tRCr 32 +#define M_BCM1480_MC_tRCr _SB_MAKEMASK(5, S_BCM1480_MC_tRCr) +#define V_BCM1480_MC_tRCr(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCr) +#define G_BCM1480_MC_tRCr(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCr, M_BCM1480_MC_tRCr) +#define K_BCM1480_MC_tRCr_DEFAULT 9 +#define V_BCM1480_MC_tRCr_DEFAULT V_BCM1480_MC_tRCr(K_BCM1480_MC_tRCr_DEFAULT) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_tFAW 40 +#define M_BCM1480_MC_tFAW _SB_MAKEMASK(6, S_BCM1480_MC_tFAW) +#define V_BCM1480_MC_tFAW(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tFAW) +#define G_BCM1480_MC_tFAW(x) _SB_GETVALUE(x, S_BCM1480_MC_tFAW, M_BCM1480_MC_tFAW) +#define K_BCM1480_MC_tFAW_DEFAULT 0 +#define V_BCM1480_MC_tFAW_DEFAULT V_BCM1480_MC_tFAW(K_BCM1480_MC_tFAW_DEFAULT) +#endif + +#define S_BCM1480_MC_tRFC 48 +#define M_BCM1480_MC_tRFC _SB_MAKEMASK(7, S_BCM1480_MC_tRFC) +#define V_BCM1480_MC_tRFC(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRFC) +#define G_BCM1480_MC_tRFC(x) _SB_GETVALUE(x, S_BCM1480_MC_tRFC, M_BCM1480_MC_tRFC) +#define K_BCM1480_MC_tRFC_DEFAULT 12 +#define V_BCM1480_MC_tRFC_DEFAULT V_BCM1480_MC_tRFC(K_BCM1480_MC_tRFC_DEFAULT) + +#define S_BCM1480_MC_tFIFO 56 +#define M_BCM1480_MC_tFIFO _SB_MAKEMASK(2, S_BCM1480_MC_tFIFO) +#define V_BCM1480_MC_tFIFO(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tFIFO) +#define G_BCM1480_MC_tFIFO(x) _SB_GETVALUE(x, S_BCM1480_MC_tFIFO, M_BCM1480_MC_tFIFO) +#define K_BCM1480_MC_tFIFO_DEFAULT 0 +#define V_BCM1480_MC_tFIFO_DEFAULT V_BCM1480_MC_tFIFO(K_BCM1480_MC_tFIFO_DEFAULT) + +#define S_BCM1480_MC_tW2R 58 +#define M_BCM1480_MC_tW2R _SB_MAKEMASK(2, S_BCM1480_MC_tW2R) +#define V_BCM1480_MC_tW2R(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tW2R) +#define G_BCM1480_MC_tW2R(x) _SB_GETVALUE(x, S_BCM1480_MC_tW2R, M_BCM1480_MC_tW2R) +#define K_BCM1480_MC_tW2R_DEFAULT 1 +#define V_BCM1480_MC_tW2R_DEFAULT V_BCM1480_MC_tW2R(K_BCM1480_MC_tW2R_DEFAULT) + +#define S_BCM1480_MC_tR2W 60 +#define M_BCM1480_MC_tR2W _SB_MAKEMASK(2, S_BCM1480_MC_tR2W) +#define V_BCM1480_MC_tR2W(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tR2W) +#define G_BCM1480_MC_tR2W(x) _SB_GETVALUE(x, S_BCM1480_MC_tR2W, M_BCM1480_MC_tR2W) +#define K_BCM1480_MC_tR2W_DEFAULT 0 +#define V_BCM1480_MC_tR2W_DEFAULT V_BCM1480_MC_tR2W(K_BCM1480_MC_tR2W_DEFAULT) + +#define M_BCM1480_MC_tR2R _SB_MAKEMASK1(62) + +#define V_BCM1480_MC_TIMING_DEFAULT (M_BCM1480_MC_tR2R | \ + V_BCM1480_MC_tFIFO_DEFAULT | \ + V_BCM1480_MC_tR2W_DEFAULT | \ + V_BCM1480_MC_tW2R_DEFAULT | \ + V_BCM1480_MC_tRFC_DEFAULT | \ + V_BCM1480_MC_tRCr_DEFAULT | \ + V_BCM1480_MC_tRCw_DEFAULT | \ + V_BCM1480_MC_tRRD_DEFAULT | \ + V_BCM1480_MC_tRP_DEFAULT | \ + V_BCM1480_MC_tCwD_DEFAULT | \ + V_BCM1480_MC_tWR_DEFAULT | \ + M_BCM1480_MC_tCrDh | \ + V_BCM1480_MC_tCL_DEFAULT | \ + V_BCM1480_MC_tRCD_DEFAULT) + +/* + * SDRAM Timing Register 2 + */ + +#if SIBYTE_HDR_FEATURE(1480, PASS2) + +#define S_BCM1480_MC_tAL 0 +#define M_BCM1480_MC_tAL _SB_MAKEMASK(4, S_BCM1480_MC_tAL) +#define V_BCM1480_MC_tAL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tAL) +#define G_BCM1480_MC_tAL(x) _SB_GETVALUE(x, S_BCM1480_MC_tAL, M_BCM1480_MC_tAL) +#define K_BCM1480_MC_tAL_DEFAULT 0 +#define V_BCM1480_MC_tAL_DEFAULT V_BCM1480_MC_tAL(K_BCM1480_MC_tAL_DEFAULT) + +#define S_BCM1480_MC_tRTP 4 +#define M_BCM1480_MC_tRTP _SB_MAKEMASK(3, S_BCM1480_MC_tRTP) +#define V_BCM1480_MC_tRTP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRTP) +#define G_BCM1480_MC_tRTP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRTP, M_BCM1480_MC_tRTP) +#define K_BCM1480_MC_tRTP_DEFAULT 2 +#define V_BCM1480_MC_tRTP_DEFAULT V_BCM1480_MC_tRTP(K_BCM1480_MC_tRTP_DEFAULT) + +#define S_BCM1480_MC_tW2W 8 +#define M_BCM1480_MC_tW2W _SB_MAKEMASK(2, S_BCM1480_MC_tW2W) +#define V_BCM1480_MC_tW2W(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tW2W) +#define G_BCM1480_MC_tW2W(x) _SB_GETVALUE(x, S_BCM1480_MC_tW2W, M_BCM1480_MC_tW2W) +#define K_BCM1480_MC_tW2W_DEFAULT 0 +#define V_BCM1480_MC_tW2W_DEFAULT V_BCM1480_MC_tW2W(K_BCM1480_MC_tW2W_DEFAULT) + +#define S_BCM1480_MC_tRAP 12 +#define M_BCM1480_MC_tRAP _SB_MAKEMASK(4, S_BCM1480_MC_tRAP) +#define V_BCM1480_MC_tRAP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRAP) +#define G_BCM1480_MC_tRAP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRAP, M_BCM1480_MC_tRAP) +#define K_BCM1480_MC_tRAP_DEFAULT 0 +#define V_BCM1480_MC_tRAP_DEFAULT V_BCM1480_MC_tRAP(K_BCM1480_MC_tRAP_DEFAULT) + +#endif + + + +/* + * Global Registers: single instances per BCM1480 + */ + +/* + * Global Configuration Register (Table 99) + */ + +#define S_BCM1480_MC_BLK_SET_MARK 8 +#define M_BCM1480_MC_BLK_SET_MARK _SB_MAKEMASK(4, S_BCM1480_MC_BLK_SET_MARK) +#define V_BCM1480_MC_BLK_SET_MARK(x) _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_SET_MARK) +#define G_BCM1480_MC_BLK_SET_MARK(x) _SB_GETVALUE(x, S_BCM1480_MC_BLK_SET_MARK, M_BCM1480_MC_BLK_SET_MARK) + +#define S_BCM1480_MC_BLK_CLR_MARK 12 +#define M_BCM1480_MC_BLK_CLR_MARK _SB_MAKEMASK(4, S_BCM1480_MC_BLK_CLR_MARK) +#define V_BCM1480_MC_BLK_CLR_MARK(x) _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_CLR_MARK) +#define G_BCM1480_MC_BLK_CLR_MARK(x) _SB_GETVALUE(x, S_BCM1480_MC_BLK_CLR_MARK, M_BCM1480_MC_BLK_CLR_MARK) + +#define M_BCM1480_MC_PKT_PRIORITY _SB_MAKEMASK1(16) + +#define S_BCM1480_MC_MAX_AGE 20 +#define M_BCM1480_MC_MAX_AGE _SB_MAKEMASK(4, S_BCM1480_MC_MAX_AGE) +#define V_BCM1480_MC_MAX_AGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_MAX_AGE) +#define G_BCM1480_MC_MAX_AGE(x) _SB_GETVALUE(x, S_BCM1480_MC_MAX_AGE, M_BCM1480_MC_MAX_AGE) + +#define M_BCM1480_MC_BERR_DISABLE _SB_MAKEMASK1(29) +#define M_BCM1480_MC_FORCE_SEQ _SB_MAKEMASK1(30) +#define M_BCM1480_MC_VGEN _SB_MAKEMASK1(32) + +#define S_BCM1480_MC_SLEW 33 +#define M_BCM1480_MC_SLEW _SB_MAKEMASK(2, S_BCM1480_MC_SLEW) +#define V_BCM1480_MC_SLEW(x) _SB_MAKEVALUE(x, S_BCM1480_MC_SLEW) +#define G_BCM1480_MC_SLEW(x) _SB_GETVALUE(x, S_BCM1480_MC_SLEW, M_BCM1480_MC_SLEW) + +#define M_BCM1480_MC_SSTL_VOLTAGE _SB_MAKEMASK1(35) + +/* + * Global Channel Interleave Register (Table 100) + */ + +#define S_BCM1480_MC_INTLV0 0 +#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0) +#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0) +#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0) + +#define S_BCM1480_MC_INTLV1 8 +#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1) +#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1) +#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1) + +#define S_BCM1480_MC_INTLV_MODE 16 +#define M_BCM1480_MC_INTLV_MODE _SB_MAKEMASK(3, S_BCM1480_MC_INTLV_MODE) +#define V_BCM1480_MC_INTLV_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV_MODE) +#define G_BCM1480_MC_INTLV_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV_MODE, M_BCM1480_MC_INTLV_MODE) + +#define K_BCM1480_MC_INTLV_MODE_NONE 0x0 +#define K_BCM1480_MC_INTLV_MODE_01 0x1 +#define K_BCM1480_MC_INTLV_MODE_23 0x2 +#define K_BCM1480_MC_INTLV_MODE_01_23 0x3 +#define K_BCM1480_MC_INTLV_MODE_0123 0x4 + +#define V_BCM1480_MC_INTLV_MODE_NONE V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_NONE) +#define V_BCM1480_MC_INTLV_MODE_01 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01) +#define V_BCM1480_MC_INTLV_MODE_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_23) +#define V_BCM1480_MC_INTLV_MODE_01_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01_23) +#define V_BCM1480_MC_INTLV_MODE_0123 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_0123) + +/* + * ECC Status Register + */ + +#define S_BCM1480_MC_ECC_ERR_ADDR 0 +#define M_BCM1480_MC_ECC_ERR_ADDR _SB_MAKEMASK(37, S_BCM1480_MC_ECC_ERR_ADDR) +#define V_BCM1480_MC_ECC_ERR_ADDR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR) +#define G_BCM1480_MC_ECC_ERR_ADDR(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR, M_BCM1480_MC_ECC_ERR_ADDR) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define M_BCM1480_MC_ECC_ERR_RMW _SB_MAKEMASK1(60) +#endif + +#define M_BCM1480_MC_ECC_MULT_ERR_DET _SB_MAKEMASK1(61) +#define M_BCM1480_MC_ECC_UERR_DET _SB_MAKEMASK1(62) +#define M_BCM1480_MC_ECC_CERR_DET _SB_MAKEMASK1(63) + +/* + * Global ECC Address Register (Table 102) + */ + +#define S_BCM1480_MC_ECC_CORR_ADDR 0 +#define M_BCM1480_MC_ECC_CORR_ADDR _SB_MAKEMASK(37, S_BCM1480_MC_ECC_CORR_ADDR) +#define V_BCM1480_MC_ECC_CORR_ADDR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR) +#define G_BCM1480_MC_ECC_CORR_ADDR(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR, M_BCM1480_MC_ECC_CORR_ADDR) + +/* + * Global ECC Correction Register (Table 103) + */ + +#define S_BCM1480_MC_ECC_CORRECT 0 +#define M_BCM1480_MC_ECC_CORRECT _SB_MAKEMASK(64, S_BCM1480_MC_ECC_CORRECT) +#define V_BCM1480_MC_ECC_CORRECT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORRECT) +#define G_BCM1480_MC_ECC_CORRECT(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORRECT, M_BCM1480_MC_ECC_CORRECT) + +/* + * Global ECC Performance Counters Control Register (Table 104) + */ + +#define S_BCM1480_MC_CHANNEL_SELECT 0 +#define M_BCM1480_MC_CHANNEL_SELECT _SB_MAKEMASK(4, S_BCM1480_MC_CHANNEL_SELECT) +#define V_BCM1480_MC_CHANNEL_SELECT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CHANNEL_SELECT) +#define G_BCM1480_MC_CHANNEL_SELECT(x) _SB_GETVALUE(x, S_BCM1480_MC_CHANNEL_SELECT, M_BCM1480_MC_CHANNEL_SELECT) +#define K_BCM1480_MC_CHANNEL_SELECT_0 0x1 +#define K_BCM1480_MC_CHANNEL_SELECT_1 0x2 +#define K_BCM1480_MC_CHANNEL_SELECT_2 0x4 +#define K_BCM1480_MC_CHANNEL_SELECT_3 0x8 + +#endif /* _BCM1480_MC_H */ diff --git a/arch/mips/include/asm/sibyte/bcm1480_regs.h b/arch/mips/include/asm/sibyte/bcm1480_regs.h new file mode 100644 index 000000000000..b4077bb72611 --- /dev/null +++ b/arch/mips/include/asm/sibyte/bcm1480_regs.h @@ -0,0 +1,902 @@ +/* ********************************************************************* + * BCM1255/BCM1280/BCM1455/BCM1480 Board Support Package + * + * Register Definitions File: bcm1480_regs.h + * + * This module contains the addresses of the on-chip peripherals + * on the BCM1280 and BCM1480. + * + * BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03) + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + +#ifndef _BCM1480_REGS_H +#define _BCM1480_REGS_H + +#include "sb1250_defs.h" + +/* ********************************************************************* + * Pull in the BCM1250's registers since a great deal of the 1480's + * functions are the same as the BCM1250. + ********************************************************************* */ + +#include "sb1250_regs.h" + + +/* ********************************************************************* + * Some general notes: + * + * Register addresses are grouped by function and follow the order + * of the User Manual. + * + * For the most part, when there is more than one peripheral + * of the same type on the SOC, the constants below will be + * offsets from the base of each peripheral. For example, + * the MAC registers are described as offsets from the first + * MAC register, and there will be a MAC_REGISTER() macro + * to calculate the base address of a given MAC. + * + * The information in this file is based on the BCM1X55/BCM1X80 + * User Manual, Document 1X55_1X80-UM100-R, 22/12/03. + * + * This file is basically a "what's new" header file. Since the + * BCM1250 and the new BCM1480 (and derivatives) share many common + * features, this file contains only what's new or changed from + * the 1250. (above, you can see that we include the 1250 symbols + * to get the base functionality). + * + * In software, be sure to use the correct symbols, particularly + * for blocks that are different between the two chip families. + * All BCM1480-specific symbols have _BCM1480_ in their names, + * and all BCM1250-specific and "base" functions that are common in + * both chips have no special names (this is for compatibility with + * older include files). Therefore, if you're working with the + * SCD, which is very different on each chip, A_SCD_xxx implies + * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480 + * version. + ********************************************************************* */ + + +/* ********************************************************************* + * Memory Controller Registers (Section 6) + ********************************************************************* */ + +#define A_BCM1480_MC_BASE_0 0x0010050000 +#define A_BCM1480_MC_BASE_1 0x0010051000 +#define A_BCM1480_MC_BASE_2 0x0010052000 +#define A_BCM1480_MC_BASE_3 0x0010053000 +#define BCM1480_MC_REGISTER_SPACING 0x1000 + +#define A_BCM1480_MC_BASE(ctlid) (A_BCM1480_MC_BASE_0+(ctlid)*BCM1480_MC_REGISTER_SPACING) +#define A_BCM1480_MC_REGISTER(ctlid, reg) (A_BCM1480_MC_BASE(ctlid)+(reg)) + +#define R_BCM1480_MC_CONFIG 0x0000000100 +#define R_BCM1480_MC_CS_START 0x0000000120 +#define R_BCM1480_MC_CS_END 0x0000000140 +#define S_BCM1480_MC_CS_STARTEND 24 + +#define R_BCM1480_MC_CS01_ROW0 0x0000000180 +#define R_BCM1480_MC_CS01_ROW1 0x00000001A0 +#define R_BCM1480_MC_CS23_ROW0 0x0000000200 +#define R_BCM1480_MC_CS23_ROW1 0x0000000220 +#define R_BCM1480_MC_CS01_COL0 0x0000000280 +#define R_BCM1480_MC_CS01_COL1 0x00000002A0 +#define R_BCM1480_MC_CS23_COL0 0x0000000300 +#define R_BCM1480_MC_CS23_COL1 0x0000000320 + +#define R_BCM1480_MC_CSX_BASE 0x0000000180 +#define R_BCM1480_MC_CSX_ROW0 0x0000000000 /* relative to CSX_BASE */ +#define R_BCM1480_MC_CSX_ROW1 0x0000000020 /* relative to CSX_BASE */ +#define R_BCM1480_MC_CSX_COL0 0x0000000100 /* relative to CSX_BASE */ +#define R_BCM1480_MC_CSX_COL1 0x0000000120 /* relative to CSX_BASE */ +#define BCM1480_MC_CSX_SPACING 0x0000000080 /* CS23 relative to CS01 */ + +#define R_BCM1480_MC_CS01_BA 0x0000000380 +#define R_BCM1480_MC_CS23_BA 0x00000003A0 +#define R_BCM1480_MC_DRAMCMD 0x0000000400 +#define R_BCM1480_MC_DRAMMODE 0x0000000420 +#define R_BCM1480_MC_CLOCK_CFG 0x0000000440 +#define R_BCM1480_MC_MCLK_CFG R_BCM1480_MC_CLOCK_CFG +#define R_BCM1480_MC_TEST_DATA 0x0000000480 +#define R_BCM1480_MC_TEST_ECC 0x00000004A0 +#define R_BCM1480_MC_TIMING1 0x00000004C0 +#define R_BCM1480_MC_TIMING2 0x00000004E0 +#define R_BCM1480_MC_DLL_CFG 0x0000000500 +#define R_BCM1480_MC_DRIVE_CFG 0x0000000520 + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define R_BCM1480_MC_ODT 0x0000000460 +#define R_BCM1480_MC_ECC_STATUS 0x0000000540 +#endif + +/* Global registers (single instance) */ +#define A_BCM1480_MC_GLB_CONFIG 0x0010054100 +#define A_BCM1480_MC_GLB_INTLV 0x0010054120 +#define A_BCM1480_MC_GLB_ECC_STATUS 0x0010054140 +#define A_BCM1480_MC_GLB_ECC_ADDR 0x0010054160 +#define A_BCM1480_MC_GLB_ECC_CORRECT 0x0010054180 +#define A_BCM1480_MC_GLB_PERF_CNT_CONTROL 0x00100541A0 + +/* ********************************************************************* + * L2 Cache Control Registers (Section 5) + ********************************************************************* */ + +#define A_BCM1480_L2_BASE 0x0010040000 + +#define A_BCM1480_L2_READ_TAG 0x0010040018 +#define A_BCM1480_L2_ECC_TAG 0x0010040038 +#define A_BCM1480_L2_MISC0_VALUE 0x0010040058 +#define A_BCM1480_L2_MISC1_VALUE 0x0010040078 +#define A_BCM1480_L2_MISC2_VALUE 0x0010040098 +#define A_BCM1480_L2_MISC_CONFIG 0x0010040040 /* x040 */ +#define A_BCM1480_L2_CACHE_DISABLE 0x0010040060 /* x060 */ +#define A_BCM1480_L2_MAKECACHEDISABLE(x) (A_BCM1480_L2_CACHE_DISABLE | (((x)&0xF) << 12)) +#define A_BCM1480_L2_WAY_ENABLE_3_0 0x0010040080 /* x080 */ +#define A_BCM1480_L2_WAY_ENABLE_7_4 0x00100400A0 /* x0A0 */ +#define A_BCM1480_L2_MAKE_WAY_ENABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((x)&0xF) << 12)) +#define A_BCM1480_L2_MAKE_WAY_ENABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((x)&0xF) << 12)) +#define A_BCM1480_L2_MAKE_WAY_DISABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((~x)&0xF) << 12)) +#define A_BCM1480_L2_MAKE_WAY_DISABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((~x)&0xF) << 12)) +#define A_BCM1480_L2_WAY_LOCAL_3_0 0x0010040100 /* x100 */ +#define A_BCM1480_L2_WAY_LOCAL_7_4 0x0010040120 /* x120 */ +#define A_BCM1480_L2_WAY_REMOTE_3_0 0x0010040140 /* x140 */ +#define A_BCM1480_L2_WAY_REMOTE_7_4 0x0010040160 /* x160 */ +#define A_BCM1480_L2_WAY_AGENT_3_0 0x00100400C0 /* xxC0 */ +#define A_BCM1480_L2_WAY_AGENT_7_4 0x00100400E0 /* xxE0 */ +#define A_BCM1480_L2_WAY_ENABLE(A, banks) (A | (((~(banks))&0x0F) << 8)) +#define A_BCM1480_L2_BANK_BASE 0x00D0300000 +#define A_BCM1480_L2_BANK_ADDRESS(b) (A_BCM1480_L2_BANK_BASE | (((b)&0x7)<<17)) +#define A_BCM1480_L2_MGMT_TAG_BASE 0x00D0000000 + + +/* ********************************************************************* + * PCI-X Interface Registers (Section 7) + ********************************************************************* */ + +#define A_BCM1480_PCI_BASE 0x0010061400 + +#define A_BCM1480_PCI_RESET 0x0010061400 +#define A_BCM1480_PCI_DLL 0x0010061500 + +#define A_BCM1480_PCI_TYPE00_HEADER 0x002E000000 + +/* ********************************************************************* + * Ethernet MAC Registers (Section 11) and DMA Registers (Section 10.6) + ********************************************************************* */ + +/* No register changes with Rev.C BCM1250, but one additional MAC */ + +#define A_BCM1480_MAC_BASE_2 0x0010066000 + +#ifndef A_MAC_BASE_2 +#define A_MAC_BASE_2 A_BCM1480_MAC_BASE_2 +#endif + +#define A_BCM1480_MAC_BASE_3 0x0010067000 +#define A_MAC_BASE_3 A_BCM1480_MAC_BASE_3 + +#define R_BCM1480_MAC_DMA_OODPKTLOST 0x00000038 + +#ifndef R_MAC_DMA_OODPKTLOST +#define R_MAC_DMA_OODPKTLOST R_BCM1480_MAC_DMA_OODPKTLOST +#endif + + +/* ********************************************************************* + * DUART Registers (Section 14) + ********************************************************************* */ + +/* No significant differences from BCM1250, two DUARTs */ + +/* Conventions, per user manual: + * DUART generic, channels A,B,C,D + * DUART0 implementing channels A,B + * DUART1 inplementing channels C,D + */ + +#define BCM1480_DUART_NUM_PORTS 4 + +#define A_BCM1480_DUART0 0x0010060000 +#define A_BCM1480_DUART1 0x0010060400 +#define A_BCM1480_DUART(chan) ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1) + +#define BCM1480_DUART_CHANREG_SPACING 0x100 +#define A_BCM1480_DUART_CHANREG(chan, reg) \ + (A_BCM1480_DUART(chan) + \ + BCM1480_DUART_CHANREG_SPACING * (((chan) & 1) + 1) + (reg)) +#define A_BCM1480_DUART_CTRLREG(chan, reg) \ + (A_BCM1480_DUART(chan) + \ + BCM1480_DUART_CHANREG_SPACING * 3 + (reg)) + +#define DUART_IMRISR_SPACING 0x20 +#define DUART_INCHNG_SPACING 0x10 + +#define R_BCM1480_DUART_IMRREG(chan) \ + (R_DUART_IMR_A + ((chan) & 1) * DUART_IMRISR_SPACING) +#define R_BCM1480_DUART_ISRREG(chan) \ + (R_DUART_ISR_A + ((chan) & 1) * DUART_IMRISR_SPACING) +#define R_BCM1480_DUART_INCHREG(chan) \ + (R_DUART_IN_CHNG_A + ((chan) & 1) * DUART_INCHNG_SPACING) + +#define A_BCM1480_DUART_IMRREG(chan) \ + (A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_IMRREG(chan))) +#define A_BCM1480_DUART_ISRREG(chan) \ + (A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_ISRREG(chan))) + +#define A_BCM1480_DUART_IN_PORT(chan) \ + (A_BCM1480_DUART_CTRLREG((chan), R_DUART_IN_PORT)) + +/* + * These constants are the absolute addresses. + */ + +#define A_BCM1480_DUART_MODE_REG_1_C 0x0010060400 +#define A_BCM1480_DUART_MODE_REG_2_C 0x0010060410 +#define A_BCM1480_DUART_STATUS_C 0x0010060420 +#define A_BCM1480_DUART_CLK_SEL_C 0x0010060430 +#define A_BCM1480_DUART_FULL_CTL_C 0x0010060440 +#define A_BCM1480_DUART_CMD_C 0x0010060450 +#define A_BCM1480_DUART_RX_HOLD_C 0x0010060460 +#define A_BCM1480_DUART_TX_HOLD_C 0x0010060470 +#define A_BCM1480_DUART_OPCR_C 0x0010060480 +#define A_BCM1480_DUART_AUX_CTRL_C 0x0010060490 + +#define A_BCM1480_DUART_MODE_REG_1_D 0x0010060500 +#define A_BCM1480_DUART_MODE_REG_2_D 0x0010060510 +#define A_BCM1480_DUART_STATUS_D 0x0010060520 +#define A_BCM1480_DUART_CLK_SEL_D 0x0010060530 +#define A_BCM1480_DUART_FULL_CTL_D 0x0010060540 +#define A_BCM1480_DUART_CMD_D 0x0010060550 +#define A_BCM1480_DUART_RX_HOLD_D 0x0010060560 +#define A_BCM1480_DUART_TX_HOLD_D 0x0010060570 +#define A_BCM1480_DUART_OPCR_D 0x0010060580 +#define A_BCM1480_DUART_AUX_CTRL_D 0x0010060590 + +#define A_BCM1480_DUART_INPORT_CHNG_CD 0x0010060600 +#define A_BCM1480_DUART_AUX_CTRL_CD 0x0010060610 +#define A_BCM1480_DUART_ISR_C 0x0010060620 +#define A_BCM1480_DUART_IMR_C 0x0010060630 +#define A_BCM1480_DUART_ISR_D 0x0010060640 +#define A_BCM1480_DUART_IMR_D 0x0010060650 +#define A_BCM1480_DUART_OUT_PORT_CD 0x0010060660 +#define A_BCM1480_DUART_OPCR_CD 0x0010060670 +#define A_BCM1480_DUART_IN_PORT_CD 0x0010060680 +#define A_BCM1480_DUART_ISR_CD 0x0010060690 +#define A_BCM1480_DUART_IMR_CD 0x00100606A0 +#define A_BCM1480_DUART_SET_OPR_CD 0x00100606B0 +#define A_BCM1480_DUART_CLEAR_OPR_CD 0x00100606C0 +#define A_BCM1480_DUART_INPORT_CHNG_C 0x00100606D0 +#define A_BCM1480_DUART_INPORT_CHNG_D 0x00100606E0 + + +/* ********************************************************************* + * Generic Bus Registers (Section 15) and PCMCIA Registers (Section 16) + ********************************************************************* */ + +#define A_BCM1480_IO_PCMCIA_CFG_B 0x0010061A58 +#define A_BCM1480_IO_PCMCIA_STATUS_B 0x0010061A68 + +/* ********************************************************************* + * GPIO Registers (Section 17) + ********************************************************************* */ + +/* One additional GPIO register, placed _before_ the BCM1250's GPIO block base */ + +#define A_BCM1480_GPIO_INT_ADD_TYPE 0x0010061A78 +#define R_BCM1480_GPIO_INT_ADD_TYPE (-8) + +#define A_GPIO_INT_ADD_TYPE A_BCM1480_GPIO_INT_ADD_TYPE +#define R_GPIO_INT_ADD_TYPE R_BCM1480_GPIO_INT_ADD_TYPE + +/* ********************************************************************* + * SMBus Registers (Section 18) + ********************************************************************* */ + +/* No changes from BCM1250 */ + +/* ********************************************************************* + * Timer Registers (Sections 4.6) + ********************************************************************* */ + +/* BCM1480 has two additional watchdogs */ + +/* Watchdog timers */ + +#define A_BCM1480_SCD_WDOG_2 0x0010022050 +#define A_BCM1480_SCD_WDOG_3 0x0010022150 + +#define BCM1480_SCD_NUM_WDOGS 4 + +#define A_BCM1480_SCD_WDOG_BASE(w) (A_BCM1480_SCD_WDOG_0+((w)&2)*0x1000 + ((w)&1)*0x100) +#define A_BCM1480_SCD_WDOG_REGISTER(w, r) (A_BCM1480_SCD_WDOG_BASE(w) + (r)) + +#define A_BCM1480_SCD_WDOG_INIT_2 0x0010022050 +#define A_BCM1480_SCD_WDOG_CNT_2 0x0010022058 +#define A_BCM1480_SCD_WDOG_CFG_2 0x0010022060 + +#define A_BCM1480_SCD_WDOG_INIT_3 0x0010022150 +#define A_BCM1480_SCD_WDOG_CNT_3 0x0010022158 +#define A_BCM1480_SCD_WDOG_CFG_3 0x0010022160 + +/* BCM1480 has two additional compare registers */ + +#define A_BCM1480_SCD_ZBBUS_CYCLE_COUNT A_SCD_ZBBUS_CYCLE_COUNT +#define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE 0x0010020C00 +#define A_BCM1480_SCD_ZBBUS_CYCLE_CP0 A_SCD_ZBBUS_CYCLE_CP0 +#define A_BCM1480_SCD_ZBBUS_CYCLE_CP1 A_SCD_ZBBUS_CYCLE_CP1 +#define A_BCM1480_SCD_ZBBUS_CYCLE_CP2 0x0010020C10 +#define A_BCM1480_SCD_ZBBUS_CYCLE_CP3 0x0010020C18 + +/* ********************************************************************* + * System Control Registers (Section 4.2) + ********************************************************************* */ + +/* Scratch register in different place */ + +#define A_BCM1480_SCD_SCRATCH 0x100200A0 + +/* ********************************************************************* + * System Address Trap Registers (Section 4.9) + ********************************************************************* */ + +/* No changes from BCM1250 */ + +/* ********************************************************************* + * System Interrupt Mapper Registers (Sections 4.3-4.5) + ********************************************************************* */ + +#define A_BCM1480_IMR_CPU0_BASE 0x0010020000 +#define A_BCM1480_IMR_CPU1_BASE 0x0010022000 +#define A_BCM1480_IMR_CPU2_BASE 0x0010024000 +#define A_BCM1480_IMR_CPU3_BASE 0x0010026000 +#define BCM1480_IMR_REGISTER_SPACING 0x2000 +#define BCM1480_IMR_REGISTER_SPACING_SHIFT 13 + +#define A_BCM1480_IMR_MAPPER(cpu) (A_BCM1480_IMR_CPU0_BASE+(cpu)*BCM1480_IMR_REGISTER_SPACING) +#define A_BCM1480_IMR_REGISTER(cpu, reg) (A_BCM1480_IMR_MAPPER(cpu)+(reg)) + +/* Most IMR registers are 128 bits, implemented as non-contiguous + 64-bit registers high (_H) and low (_L) */ +#define BCM1480_IMR_HL_SPACING 0x1000 + +#define R_BCM1480_IMR_INTERRUPT_DIAG_H 0x0010 +#define R_BCM1480_IMR_LDT_INTERRUPT_H 0x0018 +#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H 0x0020 +#define R_BCM1480_IMR_INTERRUPT_MASK_H 0x0028 +#define R_BCM1480_IMR_INTERRUPT_TRACE_H 0x0038 +#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_H 0x0040 +#define R_BCM1480_IMR_LDT_INTERRUPT_SET 0x0048 +#define R_BCM1480_IMR_MAILBOX_0_CPU 0x00C0 +#define R_BCM1480_IMR_MAILBOX_0_SET_CPU 0x00C8 +#define R_BCM1480_IMR_MAILBOX_0_CLR_CPU 0x00D0 +#define R_BCM1480_IMR_MAILBOX_1_CPU 0x00E0 +#define R_BCM1480_IMR_MAILBOX_1_SET_CPU 0x00E8 +#define R_BCM1480_IMR_MAILBOX_1_CLR_CPU 0x00F0 +#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H 0x0100 +#define BCM1480_IMR_INTERRUPT_STATUS_COUNT 8 +#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H 0x0200 +#define BCM1480_IMR_INTERRUPT_MAP_COUNT 64 + +#define R_BCM1480_IMR_INTERRUPT_DIAG_L 0x1010 +#define R_BCM1480_IMR_LDT_INTERRUPT_L 0x1018 +#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L 0x1020 +#define R_BCM1480_IMR_INTERRUPT_MASK_L 0x1028 +#define R_BCM1480_IMR_INTERRUPT_TRACE_L 0x1038 +#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_L 0x1040 +#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L 0x1100 +#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L 0x1200 + +#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE 0x0010028000 +#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE 0x0010028100 +#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE 0x0010028200 +#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE 0x0010028300 +#define BCM1480_IMR_ALIAS_MAILBOX_SPACING 0100 + +#define A_BCM1480_IMR_ALIAS_MAILBOX(cpu) (A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE + \ + (cpu)*BCM1480_IMR_ALIAS_MAILBOX_SPACING) +#define A_BCM1480_IMR_ALIAS_MAILBOX_REGISTER(cpu, reg) (A_BCM1480_IMR_ALIAS_MAILBOX(cpu)+(reg)) + +#define R_BCM1480_IMR_ALIAS_MAILBOX_0 0x0000 /* 0x0x0 */ +#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET 0x0008 /* 0x0x8 */ + +/* + * these macros work together to build the address of a mailbox + * register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2) + * for mbox_0_set_cpu2 returns 0x00100240C8 + */ +#define R_BCM1480_IMR_MAILBOX_CPU 0x00 +#define R_BCM1480_IMR_MAILBOX_SET 0x08 +#define R_BCM1480_IMR_MAILBOX_CLR 0x10 +#define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20 +#define A_BCM1480_MAILBOX_REGISTER(num, reg, cpu) \ + (A_BCM1480_IMR_CPU0_BASE + \ + (num * R_BCM1480_IMR_MAILBOX_NUM_SPACING) + \ + (cpu * BCM1480_IMR_REGISTER_SPACING) + \ + (R_BCM1480_IMR_MAILBOX_0_CPU + reg)) + +/* ********************************************************************* + * System Performance Counter Registers (Section 4.7) + ********************************************************************* */ + +/* BCM1480 has four more performance counter registers, and two control + registers. */ + +#define A_BCM1480_SCD_PERF_CNT_BASE 0x00100204C0 + +#define A_BCM1480_SCD_PERF_CNT_CFG0 0x00100204C0 +#define A_BCM1480_SCD_PERF_CNT_CFG_0 A_BCM1480_SCD_PERF_CNT_CFG0 +#define A_BCM1480_SCD_PERF_CNT_CFG1 0x00100204C8 +#define A_BCM1480_SCD_PERF_CNT_CFG_1 A_BCM1480_SCD_PERF_CNT_CFG1 + +#define A_BCM1480_SCD_PERF_CNT_0 A_SCD_PERF_CNT_0 +#define A_BCM1480_SCD_PERF_CNT_1 A_SCD_PERF_CNT_1 +#define A_BCM1480_SCD_PERF_CNT_2 A_SCD_PERF_CNT_2 +#define A_BCM1480_SCD_PERF_CNT_3 A_SCD_PERF_CNT_3 + +#define A_BCM1480_SCD_PERF_CNT_4 0x00100204F0 +#define A_BCM1480_SCD_PERF_CNT_5 0x00100204F8 +#define A_BCM1480_SCD_PERF_CNT_6 0x0010020500 +#define A_BCM1480_SCD_PERF_CNT_7 0x0010020508 + +#define BCM1480_SCD_NUM_PERF_CNT 8 +#define BCM1480_SCD_PERF_CNT_SPACING 8 +#define A_BCM1480_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*BCM1480_SCD_PERF_CNT_SPACING)) + +/* ********************************************************************* + * System Bus Watcher Registers (Section 4.8) + ********************************************************************* */ + + +/* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */ + +#define A_BCM1480_BUS_ERR_STATUS_DEBUG 0x00100208D8 + +/* ********************************************************************* + * System Debug Controller Registers (Section 19) + ********************************************************************* */ + +/* Same as 1250 */ + +/* ********************************************************************* + * System Trace Unit Registers (Sections 4.10) + ********************************************************************* */ + +/* Same as 1250 */ + +/* ********************************************************************* + * Data Mover DMA Registers (Section 10.7) + ********************************************************************* */ + +/* Same as 1250 */ + + +/* ********************************************************************* + * HyperTransport Interface Registers (Section 8) + ********************************************************************* */ + +#define BCM1480_HT_NUM_PORTS 3 +#define BCM1480_HT_PORT_SPACING 0x800 +#define A_BCM1480_HT_PORT_HEADER(x) (A_BCM1480_HT_PORT0_HEADER + ((x)*BCM1480_HT_PORT_SPACING)) + +#define A_BCM1480_HT_PORT0_HEADER 0x00FE000000 +#define A_BCM1480_HT_PORT1_HEADER 0x00FE000800 +#define A_BCM1480_HT_PORT2_HEADER 0x00FE001000 +#define A_BCM1480_HT_TYPE00_HEADER 0x00FE002000 + + +/* ********************************************************************* + * Node Controller Registers (Section 9) + ********************************************************************* */ + +#define A_BCM1480_NC_BASE 0x00DFBD0000 + +#define A_BCM1480_NC_RLD_FIELD 0x00DFBD0000 +#define A_BCM1480_NC_RLD_TRIGGER 0x00DFBD0020 +#define A_BCM1480_NC_RLD_BAD_ERROR 0x00DFBD0040 +#define A_BCM1480_NC_RLD_COR_ERROR 0x00DFBD0060 +#define A_BCM1480_NC_RLD_ECC_STATUS 0x00DFBD0080 +#define A_BCM1480_NC_RLD_WAY_ENABLE 0x00DFBD00A0 +#define A_BCM1480_NC_RLD_RANDOM_LFSR 0x00DFBD00C0 + +#define A_BCM1480_NC_INTERRUPT_STATUS 0x00DFBD00E0 +#define A_BCM1480_NC_INTERRUPT_ENABLE 0x00DFBD0100 +#define A_BCM1480_NC_TIMEOUT_COUNTER 0x00DFBD0120 +#define A_BCM1480_NC_TIMEOUT_COUNTER_SEL 0x00DFBD0140 + +#define A_BCM1480_NC_CREDIT_STATUS_REG0 0x00DFBD0200 +#define A_BCM1480_NC_CREDIT_STATUS_REG1 0x00DFBD0220 +#define A_BCM1480_NC_CREDIT_STATUS_REG2 0x00DFBD0240 +#define A_BCM1480_NC_CREDIT_STATUS_REG3 0x00DFBD0260 +#define A_BCM1480_NC_CREDIT_STATUS_REG4 0x00DFBD0280 +#define A_BCM1480_NC_CREDIT_STATUS_REG5 0x00DFBD02A0 +#define A_BCM1480_NC_CREDIT_STATUS_REG6 0x00DFBD02C0 +#define A_BCM1480_NC_CREDIT_STATUS_REG7 0x00DFBD02E0 +#define A_BCM1480_NC_CREDIT_STATUS_REG8 0x00DFBD0300 +#define A_BCM1480_NC_CREDIT_STATUS_REG9 0x00DFBD0320 +#define A_BCM1480_NC_CREDIT_STATUS_REG10 0x00DFBE0000 +#define A_BCM1480_NC_CREDIT_STATUS_REG11 0x00DFBE0020 +#define A_BCM1480_NC_CREDIT_STATUS_REG12 0x00DFBE0040 + +#define A_BCM1480_NC_SR_TIMEOUT_COUNTER 0x00DFBE0060 +#define A_BCM1480_NC_SR_TIMEOUT_COUNTER_SEL 0x00DFBE0080 + + +/* ********************************************************************* + * H&R Block Configuration Registers (Section 12.4) + ********************************************************************* */ + +#define A_BCM1480_HR_BASE_0 0x00DF820000 +#define A_BCM1480_HR_BASE_1 0x00DF8A0000 +#define A_BCM1480_HR_BASE_2 0x00DF920000 +#define BCM1480_HR_REGISTER_SPACING 0x80000 + +#define A_BCM1480_HR_BASE(idx) (A_BCM1480_HR_BASE_0 + ((idx)*BCM1480_HR_REGISTER_SPACING)) +#define A_BCM1480_HR_REGISTER(idx, reg) (A_BCM1480_HR_BASE(idx) + (reg)) + +#define R_BCM1480_HR_CFG 0x0000000000 + +#define R_BCM1480_HR_MAPPING 0x0000010010 + +#define BCM1480_HR_RULE_SPACING 0x0000000010 +#define BCM1480_HR_NUM_RULES 16 +#define BCM1480_HR_OP_OFFSET 0x0000000100 +#define BCM1480_HR_TYPE_OFFSET 0x0000000108 +#define R_BCM1480_HR_RULE_OP(idx) (BCM1480_HR_OP_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING)) +#define R_BCM1480_HR_RULE_TYPE(idx) (BCM1480_HR_TYPE_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING)) + +#define BCM1480_HR_LEAF_SPACING 0x0000000010 +#define BCM1480_HR_NUM_LEAVES 10 +#define BCM1480_HR_LEAF_OFFSET 0x0000000300 +#define R_BCM1480_HR_HA_LEAF0(idx) (BCM1480_HR_LEAF_OFFSET + ((idx)*BCM1480_HR_LEAF_SPACING)) + +#define R_BCM1480_HR_EX_LEAF0 0x00000003A0 + +#define BCM1480_HR_PATH_SPACING 0x0000000010 +#define BCM1480_HR_NUM_PATHS 16 +#define BCM1480_HR_PATH_OFFSET 0x0000000600 +#define R_BCM1480_HR_PATH(idx) (BCM1480_HR_PATH_OFFSET + ((idx)*BCM1480_HR_PATH_SPACING)) + +#define R_BCM1480_HR_PATH_DEFAULT 0x0000000700 + +#define BCM1480_HR_ROUTE_SPACING 8 +#define BCM1480_HR_NUM_ROUTES 512 +#define BCM1480_HR_ROUTE_OFFSET 0x0000001000 +#define R_BCM1480_HR_RT_WORD(idx) (BCM1480_HR_ROUTE_OFFSET + ((idx)*BCM1480_HR_ROUTE_SPACING)) + + +/* checked to here - ehs */ +/* ********************************************************************* + * Packet Manager DMA Registers (Section 12.5) + ********************************************************************* */ + +#define A_BCM1480_PM_BASE 0x0010056000 + +#define A_BCM1480_PMI_LCL_0 0x0010058000 +#define A_BCM1480_PMO_LCL_0 0x001005C000 +#define A_BCM1480_PMI_OFFSET_0 (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE) +#define A_BCM1480_PMO_OFFSET_0 (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE) + +#define BCM1480_PM_LCL_REGISTER_SPACING 0x100 +#define BCM1480_PM_NUM_CHANNELS 32 + +#define A_BCM1480_PMI_LCL_BASE(idx) (A_BCM1480_PMI_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING)) +#define A_BCM1480_PMI_LCL_REGISTER(idx, reg) (A_BCM1480_PMI_LCL_BASE(idx) + (reg)) +#define A_BCM1480_PMO_LCL_BASE(idx) (A_BCM1480_PMO_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING)) +#define A_BCM1480_PMO_LCL_REGISTER(idx, reg) (A_BCM1480_PMO_LCL_BASE(idx) + (reg)) + +#define BCM1480_PM_INT_PACKING 8 +#define BCM1480_PM_INT_FUNCTION_SPACING 0x40 +#define BCM1480_PM_INT_NUM_FUNCTIONS 3 + +/* + * DMA channel registers relative to A_BCM1480_PMI_LCL_BASE(n) and A_BCM1480_PMO_LCL_BASE(n) + */ + +#define R_BCM1480_PM_BASE_SIZE 0x0000000000 +#define R_BCM1480_PM_CNT 0x0000000008 +#define R_BCM1480_PM_PFCNT 0x0000000010 +#define R_BCM1480_PM_LAST 0x0000000018 +#define R_BCM1480_PM_PFINDX 0x0000000020 +#define R_BCM1480_PM_INT_WMK 0x0000000028 +#define R_BCM1480_PM_CONFIG0 0x0000000030 +#define R_BCM1480_PM_LOCALDEBUG 0x0000000078 +#define R_BCM1480_PM_CACHEABILITY 0x0000000080 /* PMI only */ +#define R_BCM1480_PM_INT_CNFG 0x0000000088 +#define R_BCM1480_PM_DESC_MERGE_TIMER 0x0000000090 +#define R_BCM1480_PM_LOCALDEBUG_PIB 0x00000000F8 /* PMI only */ +#define R_BCM1480_PM_LOCALDEBUG_POB 0x00000000F8 /* PMO only */ + +/* + * Global Registers (Not Channelized) + */ + +#define A_BCM1480_PMI_GLB_0 0x0010056000 +#define A_BCM1480_PMO_GLB_0 0x0010057000 + +/* + * PM to TX Mapping Register relative to A_BCM1480_PMI_GLB_0 and A_BCM1480_PMO_GLB_0 + */ + +#define R_BCM1480_PM_PMO_MAPPING 0x00000008C8 /* PMO only */ + +#define A_BCM1480_PM_PMO_MAPPING (A_BCM1480_PMO_GLB_0 + R_BCM1480_PM_PMO_MAPPING) + +/* + * Interrupt mapping registers + */ + + +#define A_BCM1480_PMI_INT_0 0x0010056800 +#define A_BCM1480_PMI_INT(q) (A_BCM1480_PMI_INT_0 + ((q>>8)<<8)) +#define A_BCM1480_PMI_INT_OFFSET_0 (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE) +#define A_BCM1480_PMO_INT_0 0x0010057800 +#define A_BCM1480_PMO_INT(q) (A_BCM1480_PMO_INT_0 + ((q>>8)<<8)) +#define A_BCM1480_PMO_INT_OFFSET_0 (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE) + +/* + * Interrupt registers relative to A_BCM1480_PMI_INT_0 and A_BCM1480_PMO_INT_0 + */ + +#define R_BCM1480_PM_INT_ST 0x0000000000 +#define R_BCM1480_PM_INT_MSK 0x0000000040 +#define R_BCM1480_PM_INT_CLR 0x0000000080 +#define R_BCM1480_PM_MRGD_INT 0x00000000C0 + +/* + * Debug registers (global) + */ + +#define A_BCM1480_PM_GLOBALDEBUGMODE_PMI 0x0010056000 +#define A_BCM1480_PM_GLOBALDEBUG_PID 0x00100567F8 +#define A_BCM1480_PM_GLOBALDEBUG_PIB 0x0010056FF8 +#define A_BCM1480_PM_GLOBALDEBUGMODE_PMO 0x0010057000 +#define A_BCM1480_PM_GLOBALDEBUG_POD 0x00100577F8 +#define A_BCM1480_PM_GLOBALDEBUG_POB 0x0010057FF8 + +/* ********************************************************************* + * Switch performance counters + ********************************************************************* */ + +#define A_BCM1480_SWPERF_CFG 0xdfb91800 +#define A_BCM1480_SWPERF_CNT0 0xdfb91880 +#define A_BCM1480_SWPERF_CNT1 0xdfb91888 +#define A_BCM1480_SWPERF_CNT2 0xdfb91890 +#define A_BCM1480_SWPERF_CNT3 0xdfb91898 + + +/* ********************************************************************* + * Switch Trace Unit + ********************************************************************* */ + +#define A_BCM1480_SWTRC_MATCH_CONTROL_0 0xDFB91000 +#define A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 0xDFB91100 +#define A_BCM1480_SWTRC_MATCH_DATA_MASK_0 0xDFB91108 +#define A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 0xDFB91200 +#define A_BCM1480_SWTRC_MATCH_TAG_MAKS_0 0xDFB91208 +#define A_BCM1480_SWTRC_EVENT_0 0xDFB91300 +#define A_BCM1480_SWTRC_SEQUENCE_0 0xDFB91400 + +#define A_BCM1480_SWTRC_CFG 0xDFB91500 +#define A_BCM1480_SWTRC_READ 0xDFB91508 + +#define A_BCM1480_SWDEBUG_SCHEDSTOP 0xDFB92000 + +#define A_BCM1480_SWTRC_MATCH_CONTROL(x) (A_BCM1480_SWTRC_MATCH_CONTROL_0 + ((x)*8)) +#define A_BCM1480_SWTRC_EVENT(x) (A_BCM1480_SWTRC_EVENT_0 + ((x)*8)) +#define A_BCM1480_SWTRC_SEQUENCE(x) (A_BCM1480_SWTRC_SEQUENCE_0 + ((x)*8)) + +#define A_BCM1480_SWTRC_MATCH_DATA_VALUE(x) (A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 + ((x)*16)) +#define A_BCM1480_SWTRC_MATCH_DATA_MASK(x) (A_BCM1480_SWTRC_MATCH_DATA_MASK_0 + ((x)*16)) +#define A_BCM1480_SWTRC_MATCH_TAG_VALUE(x) (A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 + ((x)*16)) +#define A_BCM1480_SWTRC_MATCH_TAG_MASK(x) (A_BCM1480_SWTRC_MATCH_TAG_MASK_0 + ((x)*16)) + + + +/* ********************************************************************* + * High-Speed Port Registers (Section 13) + ********************************************************************* */ + +#define A_BCM1480_HSP_BASE_0 0x00DF810000 +#define A_BCM1480_HSP_BASE_1 0x00DF890000 +#define A_BCM1480_HSP_BASE_2 0x00DF910000 +#define BCM1480_HSP_REGISTER_SPACING 0x80000 + +#define A_BCM1480_HSP_BASE(idx) (A_BCM1480_HSP_BASE_0 + ((idx)*BCM1480_HSP_REGISTER_SPACING)) +#define A_BCM1480_HSP_REGISTER(idx, reg) (A_BCM1480_HSP_BASE(idx) + (reg)) + +#define R_BCM1480_HSP_RX_SPI4_CFG_0 0x0000000000 +#define R_BCM1480_HSP_RX_SPI4_CFG_1 0x0000000008 +#define R_BCM1480_HSP_RX_SPI4_DESKEW_OVERRIDE 0x0000000010 +#define R_BCM1480_HSP_RX_SPI4_DESKEW_DATAPATH 0x0000000018 +#define R_BCM1480_HSP_RX_SPI4_PORT_INT_EN 0x0000000020 +#define R_BCM1480_HSP_RX_SPI4_PORT_INT_STATUS 0x0000000028 + +#define R_BCM1480_HSP_RX_SPI4_CALENDAR_0 0x0000000200 +#define R_BCM1480_HSP_RX_SPI4_CALENDAR_1 0x0000000208 + +#define R_BCM1480_HSP_RX_PLL_CNFG 0x0000000800 +#define R_BCM1480_HSP_RX_CALIBRATION 0x0000000808 +#define R_BCM1480_HSP_RX_TEST 0x0000000810 +#define R_BCM1480_HSP_RX_DIAG_DETAILS 0x0000000818 +#define R_BCM1480_HSP_RX_DIAG_CRC_0 0x0000000820 +#define R_BCM1480_HSP_RX_DIAG_CRC_1 0x0000000828 +#define R_BCM1480_HSP_RX_DIAG_HTCMD 0x0000000830 +#define R_BCM1480_HSP_RX_DIAG_PKTCTL 0x0000000838 + +#define R_BCM1480_HSP_RX_VIS_FLCTRL_COUNTER 0x0000000870 + +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_0 0x0000020020 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_1 0x0000020028 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_2 0x0000020030 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_3 0x0000020038 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_4 0x0000020040 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_5 0x0000020048 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_6 0x0000020050 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_7 0x0000020058 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_RX_PKT_RAMALLOC_0 + 8*(idx)) + +/* XXX Following registers were shuffled. Renamed/renumbered per errata. */ +#define R_BCM1480_HSP_RX_HT_RAMALLOC_0 0x0000020078 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_1 0x0000020080 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_2 0x0000020088 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_3 0x0000020090 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_4 0x0000020098 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_5 0x00000200A0 + +#define R_BCM1480_HSP_RX_SPI_WATERMARK_0 0x00000200B0 +#define R_BCM1480_HSP_RX_SPI_WATERMARK_1 0x00000200B8 +#define R_BCM1480_HSP_RX_SPI_WATERMARK_2 0x00000200C0 +#define R_BCM1480_HSP_RX_SPI_WATERMARK_3 0x00000200C8 +#define R_BCM1480_HSP_RX_SPI_WATERMARK_4 0x00000200D0 +#define R_BCM1480_HSP_RX_SPI_WATERMARK_5 0x00000200D8 +#define R_BCM1480_HSP_RX_SPI_WATERMARK_6 0x00000200E0 +#define R_BCM1480_HSP_RX_SPI_WATERMARK_7 0x00000200E8 +#define R_BCM1480_HSP_RX_SPI_WATERMARK(idx) (R_BCM1480_HSP_RX_SPI_WATERMARK_0 + 8*(idx)) + +#define R_BCM1480_HSP_RX_VIS_CMDQ_0 0x00000200F0 +#define R_BCM1480_HSP_RX_VIS_CMDQ_1 0x00000200F8 +#define R_BCM1480_HSP_RX_VIS_CMDQ_2 0x0000020100 +#define R_BCM1480_HSP_RX_RAM_READCTL 0x0000020108 +#define R_BCM1480_HSP_RX_RAM_READWINDOW 0x0000020110 +#define R_BCM1480_HSP_RX_RF_READCTL 0x0000020118 +#define R_BCM1480_HSP_RX_RF_READWINDOW 0x0000020120 + +#define R_BCM1480_HSP_TX_SPI4_CFG_0 0x0000040000 +#define R_BCM1480_HSP_TX_SPI4_CFG_1 0x0000040008 +#define R_BCM1480_HSP_TX_SPI4_TRAINING_FMT 0x0000040010 + +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_0 0x0000040020 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_1 0x0000040028 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_2 0x0000040030 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_3 0x0000040038 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_4 0x0000040040 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_5 0x0000040048 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_6 0x0000040050 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_7 0x0000040058 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_TX_PKT_RAMALLOC_0 + 8*(idx)) +#define R_BCM1480_HSP_TX_NPC_RAMALLOC 0x0000040078 +#define R_BCM1480_HSP_TX_RSP_RAMALLOC 0x0000040080 +#define R_BCM1480_HSP_TX_PC_RAMALLOC 0x0000040088 +#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_0 0x0000040090 +#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_1 0x0000040098 +#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_2 0x00000400A0 + +#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 0x00000400B0 +#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_1 0x00000400B8 +#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_2 0x00000400C0 +#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_3 0x00000400C8 +#define R_BCM1480_HSP_TX_PKT_RXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 + 8*(idx)) +#define R_BCM1480_HSP_TX_HTIO_RXPHITCNT 0x00000400D0 +#define R_BCM1480_HSP_TX_HTCC_RXPHITCNT 0x00000400D8 + +#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 0x00000400E0 +#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_1 0x00000400E8 +#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_2 0x00000400F0 +#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_3 0x00000400F8 +#define R_BCM1480_HSP_TX_PKT_TXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 + 8*(idx)) +#define R_BCM1480_HSP_TX_HTIO_TXPHITCNT 0x0000040100 +#define R_BCM1480_HSP_TX_HTCC_TXPHITCNT 0x0000040108 + +#define R_BCM1480_HSP_TX_SPI4_CALENDAR_0 0x0000040200 +#define R_BCM1480_HSP_TX_SPI4_CALENDAR_1 0x0000040208 + +#define R_BCM1480_HSP_TX_PLL_CNFG 0x0000040800 +#define R_BCM1480_HSP_TX_CALIBRATION 0x0000040808 +#define R_BCM1480_HSP_TX_TEST 0x0000040810 + +#define R_BCM1480_HSP_TX_VIS_CMDQ_0 0x0000040840 +#define R_BCM1480_HSP_TX_VIS_CMDQ_1 0x0000040848 +#define R_BCM1480_HSP_TX_VIS_CMDQ_2 0x0000040850 +#define R_BCM1480_HSP_TX_RAM_READCTL 0x0000040860 +#define R_BCM1480_HSP_TX_RAM_READWINDOW 0x0000040868 +#define R_BCM1480_HSP_TX_RF_READCTL 0x0000040870 +#define R_BCM1480_HSP_TX_RF_READWINDOW 0x0000040878 + +#define R_BCM1480_HSP_TX_SPI4_PORT_INT_STATUS 0x0000040880 +#define R_BCM1480_HSP_TX_SPI4_PORT_INT_EN 0x0000040888 + +#define R_BCM1480_HSP_TX_NEXT_ADDR_BASE 0x000040400 +#define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x) (R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8*(x)) + + + +/* ********************************************************************* + * Physical Address Map (Table 10 and Figure 7) + ********************************************************************* */ + +#define A_BCM1480_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000) +#define A_BCM1480_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024)) +#define A_BCM1480_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000) +#define A_BCM1480_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000) +#define A_BCM1480_PHYS_GENBUS _SB_MAKE64(0x0010090000) +#define A_BCM1480_PHYS_GENBUS_END _SB_MAKE64(0x0028000000) +#define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES _SB_MAKE64(0x0028000000) +#define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES _SB_MAKE64(0x0029000000) +#define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES _SB_MAKE64(0x002C000000) +#define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES _SB_MAKE64(0x002E000000) +#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES _SB_MAKE64(0x002F000000) +#define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES _SB_MAKE64(0x0030000000) +#define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES _SB_MAKE64(0x0040000000) +#define A_BCM1480_PHYS_HT_MEM_MATCH_BITS _SB_MAKE64(0x0060000000) +#define A_BCM1480_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000) +#define A_BCM1480_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000) +#define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS _SB_MAKE64(0x00A8000000) +#define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS _SB_MAKE64(0x00A9000000) +#define A_BCM1480_PHYS_PCI_IO_MATCH_BITS _SB_MAKE64(0x00AC000000) +#define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS _SB_MAKE64(0x00AE000000) +#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS _SB_MAKE64(0x00AF000000) +#define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS _SB_MAKE64(0x00B0000000) +#define A_BCM1480_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000) +#define A_BCM1480_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000) +#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000) +#define A_BCM1480_PHYS_HT_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000) +#define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000) +#define A_BCM1480_PHYS_HS_SUBSYS _SB_MAKE64(0x00DF000000) +#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000) +#define A_BCM1480_PHYS_HT_IO_MATCH_BITS _SB_MAKE64(0x00FC000000) +#define A_BCM1480_PHYS_HT_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000) +#define A_BCM1480_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000) +#define A_BCM1480_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024)) +#define A_BCM1480_PHYS_PCI_UPPER _SB_MAKE64(0x1000000000) +#define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES _SB_MAKE64(0x2000000000) +#define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS _SB_MAKE64(0x3000000000) +#define A_BCM1480_PHYS_HT_NODE_ALIAS _SB_MAKE64(0x4000000000) +#define A_BCM1480_PHYS_HT_FULLACCESS _SB_MAKE64(0xF000000000) + + +/* ********************************************************************* + * L2 Cache as RAM (Table 54) + ********************************************************************* */ + +#define A_BCM1480_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000) +#define BCM1480_PHYS_L2CACHE_NUM_WAYS 8 +#define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000100000) +#define A_BCM1480_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0300000) +#define A_BCM1480_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D0320000) +#define A_BCM1480_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D0340000) +#define A_BCM1480_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D0360000) +#define A_BCM1480_PHYS_L2CACHE_WAY4 _SB_MAKE64(0x00D0380000) +#define A_BCM1480_PHYS_L2CACHE_WAY5 _SB_MAKE64(0x00D03A0000) +#define A_BCM1480_PHYS_L2CACHE_WAY6 _SB_MAKE64(0x00D03C0000) +#define A_BCM1480_PHYS_L2CACHE_WAY7 _SB_MAKE64(0x00D03E0000) + +#endif /* _BCM1480_REGS_H */ diff --git a/arch/mips/include/asm/sibyte/bcm1480_scd.h b/arch/mips/include/asm/sibyte/bcm1480_scd.h new file mode 100644 index 000000000000..25ef24cbb92a --- /dev/null +++ b/arch/mips/include/asm/sibyte/bcm1480_scd.h @@ -0,0 +1,406 @@ +/* ********************************************************************* + * BCM1280/BCM1400 Board Support Package + * + * SCD Constants and Macros File: bcm1480_scd.h + * + * This module contains constants and macros useful for + * manipulating the System Control and Debug module. + * + * BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03) + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003,2004,2005 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + +#ifndef _BCM1480_SCD_H +#define _BCM1480_SCD_H + +#include "sb1250_defs.h" + +/* ********************************************************************* + * Pull in the BCM1250's SCD since lots of stuff is the same. + ********************************************************************* */ + +#include "sb1250_scd.h" + +/* ********************************************************************* + * Some general notes: + * + * This file is basically a "what's new" header file. Since the + * BCM1250 and the new BCM1480 (and derivatives) share many common + * features, this file contains only what's new or changed from + * the 1250. (above, you can see that we include the 1250 symbols + * to get the base functionality). + * + * In software, be sure to use the correct symbols, particularly + * for blocks that are different between the two chip families. + * All BCM1480-specific symbols have _BCM1480_ in their names, + * and all BCM1250-specific and "base" functions that are common in + * both chips have no special names (this is for compatibility with + * older include files). Therefore, if you're working with the + * SCD, which is very different on each chip, A_SCD_xxx implies + * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480 + * version. + ********************************************************************* */ + +/* ********************************************************************* + * System control/debug registers + ********************************************************************* */ + +/* + * System Identification and Revision Register (Table 12) + * Register: SCD_SYSTEM_REVISION + * This register is field compatible with the 1250. + */ + +/* + * New part definitions + */ + +#define K_SYS_PART_BCM1480 0x1406 +#define K_SYS_PART_BCM1280 0x1206 +#define K_SYS_PART_BCM1455 0x1407 +#define K_SYS_PART_BCM1255 0x1257 +#define K_SYS_PART_BCM1158 0x1156 + +/* + * Manufacturing Information Register (Table 14) + * Register: SCD_SYSTEM_MANUF + */ + +/* + * System Configuration Register (Table 15) + * Register: SCD_SYSTEM_CFG + * Entire register is different from 1250, all new constants below + */ + +#define M_BCM1480_SYS_RESERVED0 _SB_MAKEMASK1(0) +#define M_BCM1480_SYS_HT_MINRSTCNT _SB_MAKEMASK1(1) +#define M_BCM1480_SYS_RESERVED2 _SB_MAKEMASK1(2) +#define M_BCM1480_SYS_RESERVED3 _SB_MAKEMASK1(3) +#define M_BCM1480_SYS_RESERVED4 _SB_MAKEMASK1(4) +#define M_BCM1480_SYS_IOB_DIV _SB_MAKEMASK1(5) + +#define S_BCM1480_SYS_PLL_DIV _SB_MAKE64(6) +#define M_BCM1480_SYS_PLL_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_PLL_DIV) +#define V_BCM1480_SYS_PLL_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_PLL_DIV) +#define G_BCM1480_SYS_PLL_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_PLL_DIV, M_BCM1480_SYS_PLL_DIV) + +#define S_BCM1480_SYS_SW_DIV _SB_MAKE64(11) +#define M_BCM1480_SYS_SW_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_SW_DIV) +#define V_BCM1480_SYS_SW_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_SW_DIV) +#define G_BCM1480_SYS_SW_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_SW_DIV, M_BCM1480_SYS_SW_DIV) + +#define M_BCM1480_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16) +#define M_BCM1480_SYS_DUART1_ENABLE _SB_MAKEMASK1(17) + +#define S_BCM1480_SYS_BOOT_MODE _SB_MAKE64(18) +#define M_BCM1480_SYS_BOOT_MODE _SB_MAKEMASK(2, S_BCM1480_SYS_BOOT_MODE) +#define V_BCM1480_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_BOOT_MODE) +#define G_BCM1480_SYS_BOOT_MODE(x) _SB_GETVALUE(x, S_BCM1480_SYS_BOOT_MODE, M_BCM1480_SYS_BOOT_MODE) +#define K_BCM1480_SYS_BOOT_MODE_ROM32 0 +#define K_BCM1480_SYS_BOOT_MODE_ROM8 1 +#define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2 +#define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG 3 +#define M_BCM1480_SYS_BOOT_MODE_SMBUS _SB_MAKEMASK1(19) + +#define M_BCM1480_SYS_PCI_HOST _SB_MAKEMASK1(20) +#define M_BCM1480_SYS_PCI_ARBITER _SB_MAKEMASK1(21) +#define M_BCM1480_SYS_BIG_ENDIAN _SB_MAKEMASK1(22) +#define M_BCM1480_SYS_GENCLK_EN _SB_MAKEMASK1(23) +#define M_BCM1480_SYS_GEN_PARITY_EN _SB_MAKEMASK1(24) +#define M_BCM1480_SYS_RESERVED25 _SB_MAKEMASK1(25) + +#define S_BCM1480_SYS_CONFIG 26 +#define M_BCM1480_SYS_CONFIG _SB_MAKEMASK(6, S_BCM1480_SYS_CONFIG) +#define V_BCM1480_SYS_CONFIG(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_CONFIG) +#define G_BCM1480_SYS_CONFIG(x) _SB_GETVALUE(x, S_BCM1480_SYS_CONFIG, M_BCM1480_SYS_CONFIG) + +#define M_BCM1480_SYS_RESERVED32 _SB_MAKEMASK(32, 15) + +#define S_BCM1480_SYS_NODEID 47 +#define M_BCM1480_SYS_NODEID _SB_MAKEMASK(4, S_BCM1480_SYS_NODEID) +#define V_BCM1480_SYS_NODEID(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_NODEID) +#define G_BCM1480_SYS_NODEID(x) _SB_GETVALUE(x, S_BCM1480_SYS_NODEID, M_BCM1480_SYS_NODEID) + +#define M_BCM1480_SYS_CCNUMA_EN _SB_MAKEMASK1(51) +#define M_BCM1480_SYS_CPU_RESET_0 _SB_MAKEMASK1(52) +#define M_BCM1480_SYS_CPU_RESET_1 _SB_MAKEMASK1(53) +#define M_BCM1480_SYS_CPU_RESET_2 _SB_MAKEMASK1(54) +#define M_BCM1480_SYS_CPU_RESET_3 _SB_MAKEMASK1(55) +#define S_BCM1480_SYS_DISABLECPU0 56 +#define M_BCM1480_SYS_DISABLECPU0 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0) +#define S_BCM1480_SYS_DISABLECPU1 57 +#define M_BCM1480_SYS_DISABLECPU1 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1) +#define S_BCM1480_SYS_DISABLECPU2 58 +#define M_BCM1480_SYS_DISABLECPU2 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2) +#define S_BCM1480_SYS_DISABLECPU3 59 +#define M_BCM1480_SYS_DISABLECPU3 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3) + +#define M_BCM1480_SYS_SB_SOFTRES _SB_MAKEMASK1(60) +#define M_BCM1480_SYS_EXT_RESET _SB_MAKEMASK1(61) +#define M_BCM1480_SYS_SYSTEM_RESET _SB_MAKEMASK1(62) +#define M_BCM1480_SYS_SW_FLAG _SB_MAKEMASK1(63) + +/* + * Scratch Register (Table 16) + * Register: SCD_SYSTEM_SCRATCH + * Same as BCM1250 + */ + + +/* + * Mailbox Registers (Table 17) + * Registers: SCD_MBOX_{0,1}_CPU_x + * Same as BCM1250 + */ + + +/* + * See bcm1480_int.h for interrupt mapper registers. + */ + + +/* + * Watchdog Timer Initial Count Registers (Table 23) + * Registers: SCD_WDOG_INIT_CNT_x + * + * The watchdogs are almost the same as the 1250, except + * the configuration register has more bits to control the + * other CPUs. + */ + + +/* + * Watchdog Timer Configuration Registers (Table 25) + * Registers: SCD_WDOG_CFG_x + */ + +#define M_BCM1480_SCD_WDOG_ENABLE _SB_MAKEMASK1(0) + +#define S_BCM1480_SCD_WDOG_RESET_TYPE 2 +#define M_BCM1480_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(5, S_BCM1480_SCD_WDOG_RESET_TYPE) +#define V_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE) +#define G_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE, M_BCM1480_SCD_WDOG_RESET_TYPE) + +#define K_BCM1480_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */ +#define K_BCM1480_SCD_WDOG_RESET_SOFT 1 +#define K_BCM1480_SCD_WDOG_RESET_CPU0 3 +#define K_BCM1480_SCD_WDOG_RESET_CPU1 5 +#define K_BCM1480_SCD_WDOG_RESET_CPU2 9 +#define K_BCM1480_SCD_WDOG_RESET_CPU3 17 +#define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS 31 + + +#define M_BCM1480_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(8) + +/* + * General Timer Initial Count Registers (Table 26) + * Registers: SCD_TIMER_INIT_x + * + * The timer registers are the same as the BCM1250 + */ + + +/* + * ZBbus Count Register (Table 29) + * Register: ZBBUS_CYCLE_COUNT + * + * Same as BCM1250 + */ + +/* + * ZBbus Compare Registers (Table 30) + * Registers: ZBBUS_CYCLE_CPx + * + * Same as BCM1250 + */ + + +/* + * System Performance Counter Configuration Register (Table 31) + * Register: PERF_CNT_CFG_0 + * + * SPC_CFG_SRC[0-3] is the same as the 1250. + * SPC_CFG_SRC[4-7] only exist on the 1480 + * The clear/enable bits are in different locations on the 1250 and 1480. + */ + +#define S_SPC_CFG_SRC4 32 +#define M_SPC_CFG_SRC4 _SB_MAKEMASK(8, S_SPC_CFG_SRC4) +#define V_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC4) +#define G_SPC_CFG_SRC4(x) _SB_GETVALUE(x, S_SPC_CFG_SRC4, M_SPC_CFG_SRC4) + +#define S_SPC_CFG_SRC5 40 +#define M_SPC_CFG_SRC5 _SB_MAKEMASK(8, S_SPC_CFG_SRC5) +#define V_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC5) +#define G_SPC_CFG_SRC5(x) _SB_GETVALUE(x, S_SPC_CFG_SRC5, M_SPC_CFG_SRC5) + +#define S_SPC_CFG_SRC6 48 +#define M_SPC_CFG_SRC6 _SB_MAKEMASK(8, S_SPC_CFG_SRC6) +#define V_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC6) +#define G_SPC_CFG_SRC6(x) _SB_GETVALUE(x, S_SPC_CFG_SRC6, M_SPC_CFG_SRC6) + +#define S_SPC_CFG_SRC7 56 +#define M_SPC_CFG_SRC7 _SB_MAKEMASK(8, S_SPC_CFG_SRC7) +#define V_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC7) +#define G_SPC_CFG_SRC7(x) _SB_GETVALUE(x, S_SPC_CFG_SRC7, M_SPC_CFG_SRC7) + +/* + * System Performance Counter Control Register (Table 32) + * Register: PERF_CNT_CFG_1 + * BCM1480 specific + */ +#define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0) +#define M_BCM1480_SPC_CFG_ENABLE _SB_MAKEMASK1(1) +#if SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_SPC_CFG_CLEAR M_BCM1480_SPC_CFG_CLEAR +#define M_SPC_CFG_ENABLE M_BCM1480_SPC_CFG_ENABLE +#endif + +/* + * System Performance Counters (Table 33) + * Registers: PERF_CNT_x + */ + +#define S_BCM1480_SPC_CNT_COUNT 0 +#define M_BCM1480_SPC_CNT_COUNT _SB_MAKEMASK(40, S_BCM1480_SPC_CNT_COUNT) +#define V_BCM1480_SPC_CNT_COUNT(x) _SB_MAKEVALUE(x, S_BCM1480_SPC_CNT_COUNT) +#define G_BCM1480_SPC_CNT_COUNT(x) _SB_GETVALUE(x, S_BCM1480_SPC_CNT_COUNT, M_BCM1480_SPC_CNT_COUNT) + +#define M_BCM1480_SPC_CNT_OFLOW _SB_MAKEMASK1(40) + + +/* + * Bus Watcher Error Status Register (Tables 36, 37) + * Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG + * Same as BCM1250. + */ + +/* + * Bus Watcher Error Data Registers (Table 38) + * Registers: BUS_ERR_DATA_x + * Same as BCM1250. + */ + +/* + * Bus Watcher L2 ECC Counter Register (Table 39) + * Register: BUS_L2_ERRORS + * Same as BCM1250. + */ + + +/* + * Bus Watcher Memory and I/O Error Counter Register (Table 40) + * Register: BUS_MEM_IO_ERRORS + * Same as BCM1250. + */ + + +/* + * Address Trap Registers + * + * Register layout same as BCM1250, almost. The bus agents + * are different, and the address trap configuration bits are + * slightly different. + */ + +#define M_BCM1480_ATRAP_INDEX _SB_MAKEMASK(4, 0) +#define M_BCM1480_ATRAP_ADDRESS _SB_MAKEMASK(40, 0) + +#define S_BCM1480_ATRAP_CFG_CNT 0 +#define M_BCM1480_ATRAP_CFG_CNT _SB_MAKEMASK(3, S_BCM1480_ATRAP_CFG_CNT) +#define V_BCM1480_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CNT) +#define G_BCM1480_ATRAP_CFG_CNT(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CNT, M_BCM1480_ATRAP_CFG_CNT) + +#define M_BCM1480_ATRAP_CFG_WRITE _SB_MAKEMASK1(3) +#define M_BCM1480_ATRAP_CFG_ALL _SB_MAKEMASK1(4) +#define M_BCM1480_ATRAP_CFG_INV _SB_MAKEMASK1(5) +#define M_BCM1480_ATRAP_CFG_USESRC _SB_MAKEMASK1(6) +#define M_BCM1480_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7) + +#define S_BCM1480_ATRAP_CFG_AGENTID 8 +#define M_BCM1480_ATRAP_CFG_AGENTID _SB_MAKEMASK(4, S_BCM1480_ATRAP_CFG_AGENTID) +#define V_BCM1480_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID) +#define G_BCM1480_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID, M_BCM1480_ATRAP_CFG_AGENTID) + + +#define K_BCM1480_BUS_AGENT_CPU0 0 +#define K_BCM1480_BUS_AGENT_CPU1 1 +#define K_BCM1480_BUS_AGENT_NC 2 +#define K_BCM1480_BUS_AGENT_IOB 3 +#define K_BCM1480_BUS_AGENT_SCD 4 +#define K_BCM1480_BUS_AGENT_L2C 6 +#define K_BCM1480_BUS_AGENT_MC 7 +#define K_BCM1480_BUS_AGENT_CPU2 8 +#define K_BCM1480_BUS_AGENT_CPU3 9 +#define K_BCM1480_BUS_AGENT_PM 10 + +#define S_BCM1480_ATRAP_CFG_CATTR 12 +#define M_BCM1480_ATRAP_CFG_CATTR _SB_MAKEMASK(2, S_BCM1480_ATRAP_CFG_CATTR) +#define V_BCM1480_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CATTR) +#define G_BCM1480_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CATTR, M_BCM1480_ATRAP_CFG_CATTR) + +#define K_BCM1480_ATRAP_CFG_CATTR_IGNORE 0 +#define K_BCM1480_ATRAP_CFG_CATTR_UNC 1 +#define K_BCM1480_ATRAP_CFG_CATTR_NONCOH 2 +#define K_BCM1480_ATRAP_CFG_CATTR_COHERENT 3 + +#define M_BCM1480_ATRAP_CFG_CATTRINV _SB_MAKEMASK1(14) + + +/* + * Trace Event Registers (Table 47) + * Same as BCM1250. + */ + +/* + * Trace Sequence Control Registers (Table 48) + * Registers: TRACE_SEQUENCE_x + * + * Same as BCM1250 except for two new fields. + */ + + +#define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN _SB_MAKEMASK1(25) + +#define S_BCM1480_SCD_TRSEQ_SWFUNC 26 +#define M_BCM1480_SCD_TRSEQ_SWFUNC _SB_MAKEMASK(2, S_BCM1480_SCD_TRSEQ_SWFUNC) +#define V_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC) +#define G_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC, M_BCM1480_SCD_TRSEQ_SWFUNC) + +/* + * Trace Control Register (Table 49) + * Register: TRACE_CFG + * + * BCM1480 changes to this register (other than location of the CUR_ADDR field) + * are defined below. + */ + +#define S_BCM1480_SCD_TRACE_CFG_MODE 16 +#define M_BCM1480_SCD_TRACE_CFG_MODE _SB_MAKEMASK(2, S_BCM1480_SCD_TRACE_CFG_MODE) +#define V_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE) +#define G_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE, M_BCM1480_SCD_TRACE_CFG_MODE) + +#define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS 0 +#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1 +#define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID 2 + +#endif /* _BCM1480_SCD_H */ diff --git a/arch/mips/include/asm/sibyte/bigsur.h b/arch/mips/include/asm/sibyte/bigsur.h new file mode 100644 index 000000000000..ebefe797fc1d --- /dev/null +++ b/arch/mips/include/asm/sibyte/bigsur.h @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#ifndef __ASM_SIBYTE_BIGSUR_H +#define __ASM_SIBYTE_BIGSUR_H + +#include <asm/sibyte/sb1250.h> +#include <asm/sibyte/bcm1480_int.h> + +#ifdef CONFIG_SIBYTE_BIGSUR +#define SIBYTE_BOARD_NAME "BCM91x80A/B (BigSur)" +#define SIBYTE_HAVE_PCMCIA 1 +#define SIBYTE_HAVE_IDE 1 +#endif + +/* Generic bus chip selects */ +#define LEDS_CS 3 +#define LEDS_PHYS 0x100a0000 + +#ifdef SIBYTE_HAVE_IDE +#define IDE_CS 4 +#define IDE_PHYS 0x100b0000 +#define K_GPIO_GB_IDE 4 +#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE) +#endif + +#ifdef SIBYTE_HAVE_PCMCIA +#define PCMCIA_CS 6 +#define PCMCIA_PHYS 0x11000000 +#define K_GPIO_PC_READY 9 +#define K_INT_PC_READY (K_INT_GPIO_0 + K_GPIO_PC_READY) +#endif + +#endif /* __ASM_SIBYTE_BIGSUR_H */ + diff --git a/arch/mips/include/asm/sibyte/board.h b/arch/mips/include/asm/sibyte/board.h new file mode 100644 index 000000000000..25372ae0e814 --- /dev/null +++ b/arch/mips/include/asm/sibyte/board.h @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _SIBYTE_BOARD_H +#define _SIBYTE_BOARD_H + +#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_CRHONE) || \ + defined(CONFIG_SIBYTE_CRHINE) || defined(CONFIG_SIBYTE_LITTLESUR) +#include <asm/sibyte/swarm.h> +#endif + +#if defined(CONFIG_SIBYTE_SENTOSA) || defined(CONFIG_SIBYTE_RHONE) +#include <asm/sibyte/sentosa.h> +#endif + +#ifdef CONFIG_SIBYTE_CARMEL +#include <asm/sibyte/carmel.h> +#endif + +#ifdef CONFIG_SIBYTE_BIGSUR +#include <asm/sibyte/bigsur.h> +#endif + +#ifdef __ASSEMBLY__ + +#ifdef LEDS_PHYS +#define setleds(t0, t1, c0, c1, c2, c3) \ + li t0, (LEDS_PHYS|0xa0000000); \ + li t1, c0; \ + sb t1, 0x18(t0); \ + li t1, c1; \ + sb t1, 0x10(t0); \ + li t1, c2; \ + sb t1, 0x08(t0); \ + li t1, c3; \ + sb t1, 0x00(t0) +#else +#define setleds(t0, t1, c0, c1, c2, c3) +#endif /* LEDS_PHYS */ + +#else + +void swarm_setup(void); + +#ifdef LEDS_PHYS +extern void setleds(char *str); +#else +#define setleds(s) do { } while (0) +#endif /* LEDS_PHYS */ + +#endif /* __ASSEMBLY__ */ + +#endif /* _SIBYTE_BOARD_H */ diff --git a/arch/mips/include/asm/sibyte/carmel.h b/arch/mips/include/asm/sibyte/carmel.h new file mode 100644 index 000000000000..11cad71323e8 --- /dev/null +++ b/arch/mips/include/asm/sibyte/carmel.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2002 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#ifndef __ASM_SIBYTE_CARMEL_H +#define __ASM_SIBYTE_CARMEL_H + +#include <asm/sibyte/sb1250.h> +#include <asm/sibyte/sb1250_int.h> + +#define SIBYTE_BOARD_NAME "Carmel" + +#define GPIO_PHY_INTERRUPT 2 +#define GPIO_NONMASKABLE_INT 3 +#define GPIO_CF_INSERTED 6 +#define GPIO_MONTEREY_RESET 7 +#define GPIO_QUADUART_INT 8 +#define GPIO_CF_INT 9 +#define GPIO_FPGA_CCLK 10 +#define GPIO_FPGA_DOUT 11 +#define GPIO_FPGA_DIN 12 +#define GPIO_FPGA_PGM 13 +#define GPIO_FPGA_DONE 14 +#define GPIO_FPGA_INIT 15 + +#define LEDS_CS 2 +#define LEDS_PHYS 0x100C0000 +#define MLEDS_CS 3 +#define MLEDS_PHYS 0x100A0000 +#define UART_CS 4 +#define UART_PHYS 0x100D0000 +#define ARAVALI_CS 5 +#define ARAVALI_PHYS 0x11000000 +#define IDE_CS 6 +#define IDE_PHYS 0x100B0000 +#define ARAVALI2_CS 7 +#define ARAVALI2_PHYS 0x100E0000 + +#if defined(CONFIG_SIBYTE_CARMEL) +#define K_GPIO_GB_IDE 9 +#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE) +#endif + + +#endif /* __ASM_SIBYTE_CARMEL_H */ diff --git a/arch/mips/include/asm/sibyte/sb1250.h b/arch/mips/include/asm/sibyte/sb1250.h new file mode 100644 index 000000000000..80c1a052662a --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250.h @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _ASM_SIBYTE_SB1250_H +#define _ASM_SIBYTE_SB1250_H + +/* + * yymmddpp: year, month, day, patch. + * should sync with Makefile EXTRAVERSION + */ +#define SIBYTE_RELEASE 0x02111403 + +#define SB1250_NR_IRQS 64 + +#define BCM1480_NR_IRQS 128 +#define BCM1480_NR_IRQS_HALF 64 + +#define SB1250_DUART_MINOR_BASE 64 + +#ifndef __ASSEMBLY__ + +#include <asm/addrspace.h> + +/* For revision/pass information */ +#include <asm/sibyte/sb1250_scd.h> +#include <asm/sibyte/bcm1480_scd.h> +extern unsigned int sb1_pass; +extern unsigned int soc_pass; +extern unsigned int soc_type; +extern unsigned int periph_rev; +extern unsigned int zbbus_mhz; + +extern void sb1250_time_init(void); +extern void sb1250_mask_irq(int cpu, int irq); +extern void sb1250_unmask_irq(int cpu, int irq); + +extern void bcm1480_time_init(void); +extern void bcm1480_mask_irq(int cpu, int irq); +extern void bcm1480_unmask_irq(int cpu, int irq); + +#define AT_spin \ + __asm__ __volatile__ ( \ + ".set noat\n" \ + "li $at, 0\n" \ + "1: beqz $at, 1b\n" \ + ".set at\n" \ + ) + +#endif + +#define IOADDR(a) ((void __iomem *)(IO_BASE + (a))) + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_defs.h b/arch/mips/include/asm/sibyte/sb1250_defs.h new file mode 100644 index 000000000000..09365f9111fa --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_defs.h @@ -0,0 +1,259 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * Global constants and macros File: sb1250_defs.h + * + * This file contains macros and definitions used by the other + * include files. + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + +#ifndef _SB1250_DEFS_H +#define _SB1250_DEFS_H + +/* + * These headers require ANSI C89 string concatenation, and GCC or other + * 'long long' (64-bit integer) support. + */ +#if !defined(__STDC__) && !defined(_MSC_VER) +#error SiByte headers require ANSI C89 support +#endif + + +/* ********************************************************************* + * Macros for feature tests, used to enable include file features + * for chip features only present in certain chip revisions. + * + * SIBYTE_HDR_FEATURES may be defined to be the mask value chip/revision + * which is to be exposed by the headers. If undefined, it defaults to + * "all features." + * + * Use like: + * + * #define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_112x_PASS1 + * + * Generate defines only for that revision of chip. + * + * #if SIBYTE_HDR_FEATURE(chip,pass) + * + * True if header features for that revision or later of + * that particular chip type are enabled in SIBYTE_HDR_FEATURES. + * (Use this to bracket #defines for features present in a given + * revision and later.) + * + * Note that there is no implied ordering between chip types. + * + * Note also that 'chip' and 'pass' must textually exactly + * match the defines below. So, for example, + * SIBYTE_HDR_FEATURE(112x, PASS1) is OK, but + * SIBYTE_HDR_FEATURE(1120, pass1) is not (for two reasons). + * + * #if SIBYTE_HDR_FEATURE_UP_TO(chip,pass) + * + * Same as SIBYTE_HDR_FEATURE, but true for the named revision + * and earlier revisions of the named chip type. + * + * #if SIBYTE_HDR_FEATURE_EXACT(chip,pass) + * + * Same as SIBYTE_HDR_FEATURE, but only true for the named + * revision of the named chip type. (Note that this CANNOT + * be used to verify that you're compiling only for that + * particular chip/revision. It will be true any time this + * chip/revision is included in SIBYTE_HDR_FEATURES.) + * + * #if SIBYTE_HDR_FEATURE_CHIP(chip) + * + * True if header features for (any revision of) that chip type + * are enabled in SIBYTE_HDR_FEATURES. (Use this to bracket + * #defines for features specific to a given chip type.) + * + * Mask values currently include room for additional revisions of each + * chip type, but can be renumbered at will. Note that they MUST fit + * into 31 bits and may not include C type constructs, for safe use in + * CPP conditionals. Bit positions within chip types DO indicate + * ordering, so be careful when adding support for new minor revs. + ********************************************************************* */ + +#define SIBYTE_HDR_FMASK_1250_ALL 0x000000ff +#define SIBYTE_HDR_FMASK_1250_PASS1 0x00000001 +#define SIBYTE_HDR_FMASK_1250_PASS2 0x00000002 +#define SIBYTE_HDR_FMASK_1250_PASS3 0x00000004 + +#define SIBYTE_HDR_FMASK_112x_ALL 0x00000f00 +#define SIBYTE_HDR_FMASK_112x_PASS1 0x00000100 + +#define SIBYTE_HDR_FMASK_1480_ALL 0x0000f000 +#define SIBYTE_HDR_FMASK_1480_PASS1 0x00001000 +#define SIBYTE_HDR_FMASK_1480_PASS2 0x00002000 + +/* Bit mask for chip/revision. (use _ALL for all revisions of a chip). */ +#define SIBYTE_HDR_FMASK(chip, pass) \ + (SIBYTE_HDR_FMASK_ ## chip ## _ ## pass) +#define SIBYTE_HDR_FMASK_ALLREVS(chip) \ + (SIBYTE_HDR_FMASK_ ## chip ## _ALL) + +/* Default constant value for all chips, all revisions */ +#define SIBYTE_HDR_FMASK_ALL \ + (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \ + | SIBYTE_HDR_FMASK_1480_ALL) + +/* This one is used for the "original" BCM1250/BCM112x chips. We use this + to weed out constants and macros that do not exist on later chips like + the BCM1480 */ +#define SIBYTE_HDR_FMASK_1250_112x_ALL \ + (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL) +#define SIBYTE_HDR_FMASK_1250_112x SIBYTE_HDR_FMASK_1250_112x_ALL + +#ifndef SIBYTE_HDR_FEATURES +#define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_ALL +#endif + + +/* Bit mask for revisions of chip exclusively before the named revision. */ +#define SIBYTE_HDR_FMASK_BEFORE(chip, pass) \ + ((SIBYTE_HDR_FMASK(chip, pass) - 1) & SIBYTE_HDR_FMASK_ALLREVS(chip)) + +/* Bit mask for revisions of chip exclusively after the named revision. */ +#define SIBYTE_HDR_FMASK_AFTER(chip, pass) \ + (~(SIBYTE_HDR_FMASK(chip, pass) \ + | (SIBYTE_HDR_FMASK(chip, pass) - 1)) & SIBYTE_HDR_FMASK_ALLREVS(chip)) + + +/* True if header features enabled for (any revision of) that chip type. */ +#define SIBYTE_HDR_FEATURE_CHIP(chip) \ + (!! (SIBYTE_HDR_FMASK_ALLREVS(chip) & SIBYTE_HDR_FEATURES)) + +/* True for all versions of the BCM1250 and BCM1125, but not true for + anything else */ +#define SIBYTE_HDR_FEATURE_1250_112x \ + (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x)) +/* (!! (SIBYTE_HDR_FEATURES & SIBYHTE_HDR_FMASK_1250_112x)) */ + +/* True if header features enabled for that rev or later, inclusive. */ +#define SIBYTE_HDR_FEATURE(chip, pass) \ + (!! ((SIBYTE_HDR_FMASK(chip, pass) \ + | SIBYTE_HDR_FMASK_AFTER(chip, pass)) & SIBYTE_HDR_FEATURES)) + +/* True if header features enabled for exactly that rev. */ +#define SIBYTE_HDR_FEATURE_EXACT(chip, pass) \ + (!! (SIBYTE_HDR_FMASK(chip, pass) & SIBYTE_HDR_FEATURES)) + +/* True if header features enabled for that rev or before, inclusive. */ +#define SIBYTE_HDR_FEATURE_UP_TO(chip, pass) \ + (!! ((SIBYTE_HDR_FMASK(chip, pass) \ + | SIBYTE_HDR_FMASK_BEFORE(chip, pass)) & SIBYTE_HDR_FEATURES)) + + +/* ********************************************************************* + * Naming schemes for constants in these files: + * + * M_xxx MASK constant (identifies bits in a register). + * For multi-bit fields, all bits in the field will + * be set. + * + * K_xxx "Code" constant (value for data in a multi-bit + * field). The value is right justified. + * + * V_xxx "Value" constant. This is the same as the + * corresponding "K_xxx" constant, except it is + * shifted to the correct position in the register. + * + * S_xxx SHIFT constant. This is the number of bits that + * a field value (code) needs to be shifted + * (towards the left) to put the value in the right + * position for the register. + * + * A_xxx ADDRESS constant. This will be a physical + * address. Use the PHYS_TO_K1 macro to generate + * a K1SEG address. + * + * R_xxx RELATIVE offset constant. This is an offset from + * an A_xxx constant (usually the first register in + * a group). + * + * G_xxx(X) GET value. This macro obtains a multi-bit field + * from a register, masks it, and shifts it to + * the bottom of the register (retrieving a K_xxx + * value, for example). + * + * V_xxx(X) VALUE. This macro computes the value of a + * K_xxx constant shifted to the correct position + * in the register. + ********************************************************************* */ + + + + +/* + * Cast to 64-bit number. Presumably the syntax is different in + * assembly language. + * + * Note: you'll need to define uint32_t and uint64_t in your headers. + */ + +#if !defined(__ASSEMBLY__) +#define _SB_MAKE64(x) ((uint64_t)(x)) +#define _SB_MAKE32(x) ((uint32_t)(x)) +#else +#define _SB_MAKE64(x) (x) +#define _SB_MAKE32(x) (x) +#endif + + +/* + * Make a mask for 1 bit at position 'n' + */ + +#define _SB_MAKEMASK1(n) (_SB_MAKE64(1) << _SB_MAKE64(n)) +#define _SB_MAKEMASK1_32(n) (_SB_MAKE32(1) << _SB_MAKE32(n)) + +/* + * Make a mask for 'v' bits at position 'n' + */ + +#define _SB_MAKEMASK(v, n) (_SB_MAKE64((_SB_MAKE64(1)<<(v))-1) << _SB_MAKE64(n)) +#define _SB_MAKEMASK_32(v, n) (_SB_MAKE32((_SB_MAKE32(1)<<(v))-1) << _SB_MAKE32(n)) + +/* + * Make a value at 'v' at bit position 'n' + */ + +#define _SB_MAKEVALUE(v, n) (_SB_MAKE64(v) << _SB_MAKE64(n)) +#define _SB_MAKEVALUE_32(v, n) (_SB_MAKE32(v) << _SB_MAKE32(n)) + +#define _SB_GETVALUE(v, n, m) ((_SB_MAKE64(v) & _SB_MAKE64(m)) >> _SB_MAKE64(n)) +#define _SB_GETVALUE_32(v, n, m) ((_SB_MAKE32(v) & _SB_MAKE32(m)) >> _SB_MAKE32(n)) + +/* + * Macros to read/write on-chip registers + * XXX should we do the PHYS_TO_K1 here? + */ + + +#if defined(__mips64) && !defined(__ASSEMBLY__) +#define SBWRITECSR(csr, val) *((volatile uint64_t *) PHYS_TO_K1(csr)) = (val) +#define SBREADCSR(csr) (*((volatile uint64_t *) PHYS_TO_K1(csr))) +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_dma.h b/arch/mips/include/asm/sibyte/sb1250_dma.h new file mode 100644 index 000000000000..bad56171d747 --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_dma.h @@ -0,0 +1,594 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * DMA definitions File: sb1250_dma.h + * + * This module contains constants and macros useful for + * programming the SB1250's DMA controllers, both the data mover + * and the Ethernet DMA. + * + * SB1250 specification level: User's manual 10/21/02 + * BCM1280 specification level: User's manual 11/24/03 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_DMA_H +#define _SB1250_DMA_H + + +#include "sb1250_defs.h" + +/* ********************************************************************* + * DMA Registers + ********************************************************************* */ + +/* + * Ethernet and Serial DMA Configuration Register 0 (Table 7-4) + * Registers: DMA_CONFIG0_MAC_x_RX_CH_0 + * Registers: DMA_CONFIG0_MAC_x_TX_CH_0 + * Registers: DMA_CONFIG0_SER_x_RX + * Registers: DMA_CONFIG0_SER_x_TX + */ + + +#define M_DMA_DROP _SB_MAKEMASK1(0) + +#define M_DMA_CHAIN_SEL _SB_MAKEMASK1(1) +#define M_DMA_RESERVED1 _SB_MAKEMASK1(2) + +#define S_DMA_DESC_TYPE _SB_MAKE64(1) +#define M_DMA_DESC_TYPE _SB_MAKEMASK(2, S_DMA_DESC_TYPE) +#define V_DMA_DESC_TYPE(x) _SB_MAKEVALUE(x, S_DMA_DESC_TYPE) +#define G_DMA_DESC_TYPE(x) _SB_GETVALUE(x, S_DMA_DESC_TYPE, M_DMA_DESC_TYPE) + +#define K_DMA_DESC_TYPE_RING_AL 0 +#define K_DMA_DESC_TYPE_CHAIN_AL 1 + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define K_DMA_DESC_TYPE_RING_UAL_WI 2 +#define K_DMA_DESC_TYPE_RING_UAL_RMW 3 +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define M_DMA_EOP_INT_EN _SB_MAKEMASK1(3) +#define M_DMA_HWM_INT_EN _SB_MAKEMASK1(4) +#define M_DMA_LWM_INT_EN _SB_MAKEMASK1(5) +#define M_DMA_TBX_EN _SB_MAKEMASK1(6) +#define M_DMA_TDX_EN _SB_MAKEMASK1(7) + +#define S_DMA_INT_PKTCNT _SB_MAKE64(8) +#define M_DMA_INT_PKTCNT _SB_MAKEMASK(8, S_DMA_INT_PKTCNT) +#define V_DMA_INT_PKTCNT(x) _SB_MAKEVALUE(x, S_DMA_INT_PKTCNT) +#define G_DMA_INT_PKTCNT(x) _SB_GETVALUE(x, S_DMA_INT_PKTCNT, M_DMA_INT_PKTCNT) + +#define S_DMA_RINGSZ _SB_MAKE64(16) +#define M_DMA_RINGSZ _SB_MAKEMASK(16, S_DMA_RINGSZ) +#define V_DMA_RINGSZ(x) _SB_MAKEVALUE(x, S_DMA_RINGSZ) +#define G_DMA_RINGSZ(x) _SB_GETVALUE(x, S_DMA_RINGSZ, M_DMA_RINGSZ) + +#define S_DMA_HIGH_WATERMARK _SB_MAKE64(32) +#define M_DMA_HIGH_WATERMARK _SB_MAKEMASK(16, S_DMA_HIGH_WATERMARK) +#define V_DMA_HIGH_WATERMARK(x) _SB_MAKEVALUE(x, S_DMA_HIGH_WATERMARK) +#define G_DMA_HIGH_WATERMARK(x) _SB_GETVALUE(x, S_DMA_HIGH_WATERMARK, M_DMA_HIGH_WATERMARK) + +#define S_DMA_LOW_WATERMARK _SB_MAKE64(48) +#define M_DMA_LOW_WATERMARK _SB_MAKEMASK(16, S_DMA_LOW_WATERMARK) +#define V_DMA_LOW_WATERMARK(x) _SB_MAKEVALUE(x, S_DMA_LOW_WATERMARK) +#define G_DMA_LOW_WATERMARK(x) _SB_GETVALUE(x, S_DMA_LOW_WATERMARK, M_DMA_LOW_WATERMARK) + +/* + * Ethernet and Serial DMA Configuration Register 1 (Table 7-5) + * Registers: DMA_CONFIG1_MAC_x_RX_CH_0 + * Registers: DMA_CONFIG1_DMA_x_TX_CH_0 + * Registers: DMA_CONFIG1_SER_x_RX + * Registers: DMA_CONFIG1_SER_x_TX + */ + +#define M_DMA_HDR_CF_EN _SB_MAKEMASK1(0) +#define M_DMA_ASIC_XFR_EN _SB_MAKEMASK1(1) +#define M_DMA_PRE_ADDR_EN _SB_MAKEMASK1(2) +#define M_DMA_FLOW_CTL_EN _SB_MAKEMASK1(3) +#define M_DMA_NO_DSCR_UPDT _SB_MAKEMASK1(4) +#define M_DMA_L2CA _SB_MAKEMASK1(5) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_DMA_RX_XTRA_STATUS _SB_MAKEMASK1(6) +#define M_DMA_TX_CPU_PAUSE _SB_MAKEMASK1(6) +#define M_DMA_TX_FC_PAUSE_EN _SB_MAKEMASK1(7) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define M_DMA_MBZ1 _SB_MAKEMASK(6, 15) + +#define S_DMA_HDR_SIZE _SB_MAKE64(21) +#define M_DMA_HDR_SIZE _SB_MAKEMASK(9, S_DMA_HDR_SIZE) +#define V_DMA_HDR_SIZE(x) _SB_MAKEVALUE(x, S_DMA_HDR_SIZE) +#define G_DMA_HDR_SIZE(x) _SB_GETVALUE(x, S_DMA_HDR_SIZE, M_DMA_HDR_SIZE) + +#define M_DMA_MBZ2 _SB_MAKEMASK(5, 32) + +#define S_DMA_ASICXFR_SIZE _SB_MAKE64(37) +#define M_DMA_ASICXFR_SIZE _SB_MAKEMASK(9, S_DMA_ASICXFR_SIZE) +#define V_DMA_ASICXFR_SIZE(x) _SB_MAKEVALUE(x, S_DMA_ASICXFR_SIZE) +#define G_DMA_ASICXFR_SIZE(x) _SB_GETVALUE(x, S_DMA_ASICXFR_SIZE, M_DMA_ASICXFR_SIZE) + +#define S_DMA_INT_TIMEOUT _SB_MAKE64(48) +#define M_DMA_INT_TIMEOUT _SB_MAKEMASK(16, S_DMA_INT_TIMEOUT) +#define V_DMA_INT_TIMEOUT(x) _SB_MAKEVALUE(x, S_DMA_INT_TIMEOUT) +#define G_DMA_INT_TIMEOUT(x) _SB_GETVALUE(x, S_DMA_INT_TIMEOUT, M_DMA_INT_TIMEOUT) + +/* + * Ethernet and Serial DMA Descriptor base address (Table 7-6) + */ + +#define M_DMA_DSCRBASE_MBZ _SB_MAKEMASK(4, 0) + + +/* + * ASIC Mode Base Address (Table 7-7) + */ + +#define M_DMA_ASIC_BASE_MBZ _SB_MAKEMASK(20, 0) + +/* + * DMA Descriptor Count Registers (Table 7-8) + */ + +/* No bitfields */ + + +/* + * Current Descriptor Address Register (Table 7-11) + */ + +#define S_DMA_CURDSCR_ADDR _SB_MAKE64(0) +#define M_DMA_CURDSCR_ADDR _SB_MAKEMASK(40, S_DMA_CURDSCR_ADDR) +#define S_DMA_CURDSCR_COUNT _SB_MAKE64(40) +#define M_DMA_CURDSCR_COUNT _SB_MAKEMASK(16, S_DMA_CURDSCR_COUNT) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_DMA_TX_CH_PAUSE_ON _SB_MAKEMASK1(56) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +/* + * Receive Packet Drop Registers + */ +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_DMA_OODLOST_RX _SB_MAKE64(0) +#define M_DMA_OODLOST_RX _SB_MAKEMASK(16, S_DMA_OODLOST_RX) +#define G_DMA_OODLOST_RX(x) _SB_GETVALUE(x, S_DMA_OODLOST_RX, M_DMA_OODLOST_RX) + +#define S_DMA_EOP_COUNT_RX _SB_MAKE64(16) +#define M_DMA_EOP_COUNT_RX _SB_MAKEMASK(8, S_DMA_EOP_COUNT_RX) +#define G_DMA_EOP_COUNT_RX(x) _SB_GETVALUE(x, S_DMA_EOP_COUNT_RX, M_DMA_EOP_COUNT_RX) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +/* ********************************************************************* + * DMA Descriptors + ********************************************************************* */ + +/* + * Descriptor doubleword "A" (Table 7-12) + */ + +#define S_DMA_DSCRA_OFFSET _SB_MAKE64(0) +#define M_DMA_DSCRA_OFFSET _SB_MAKEMASK(5, S_DMA_DSCRA_OFFSET) +#define V_DMA_DSCRA_OFFSET(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_OFFSET) +#define G_DMA_DSCRA_OFFSET(x) _SB_GETVALUE(x, S_DMA_DSCRA_OFFSET, M_DMA_DSCRA_OFFSET) + +/* Note: Don't shift the address over, just mask it with the mask below */ +#define S_DMA_DSCRA_A_ADDR _SB_MAKE64(5) +#define M_DMA_DSCRA_A_ADDR _SB_MAKEMASK(35, S_DMA_DSCRA_A_ADDR) + +#define M_DMA_DSCRA_A_ADDR_OFFSET (M_DMA_DSCRA_OFFSET | M_DMA_DSCRA_A_ADDR) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_DMA_DSCRA_A_ADDR_UA _SB_MAKE64(0) +#define M_DMA_DSCRA_A_ADDR_UA _SB_MAKEMASK(40, S_DMA_DSCRA_A_ADDR_UA) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define S_DMA_DSCRA_A_SIZE _SB_MAKE64(40) +#define M_DMA_DSCRA_A_SIZE _SB_MAKEMASK(9, S_DMA_DSCRA_A_SIZE) +#define V_DMA_DSCRA_A_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_A_SIZE) +#define G_DMA_DSCRA_A_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRA_A_SIZE, M_DMA_DSCRA_A_SIZE) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_DMA_DSCRA_DSCR_CNT _SB_MAKE64(40) +#define M_DMA_DSCRA_DSCR_CNT _SB_MAKEMASK(8, S_DMA_DSCRA_DSCR_CNT) +#define G_DMA_DSCRA_DSCR_CNT(x) _SB_GETVALUE(x, S_DMA_DSCRA_DSCR_CNT, M_DMA_DSCRA_DSCR_CNT) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define M_DMA_DSCRA_INTERRUPT _SB_MAKEMASK1(49) +#define M_DMA_DSCRA_OFFSETB _SB_MAKEMASK1(50) + +#define S_DMA_DSCRA_STATUS _SB_MAKE64(51) +#define M_DMA_DSCRA_STATUS _SB_MAKEMASK(13, S_DMA_DSCRA_STATUS) +#define V_DMA_DSCRA_STATUS(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_STATUS) +#define G_DMA_DSCRA_STATUS(x) _SB_GETVALUE(x, S_DMA_DSCRA_STATUS, M_DMA_DSCRA_STATUS) + +/* + * Descriptor doubleword "B" (Table 7-13) + */ + + +#define S_DMA_DSCRB_OPTIONS _SB_MAKE64(0) +#define M_DMA_DSCRB_OPTIONS _SB_MAKEMASK(4, S_DMA_DSCRB_OPTIONS) +#define V_DMA_DSCRB_OPTIONS(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_OPTIONS) +#define G_DMA_DSCRB_OPTIONS(x) _SB_GETVALUE(x, S_DMA_DSCRB_OPTIONS, M_DMA_DSCRB_OPTIONS) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_DMA_DSCRB_A_SIZE _SB_MAKE64(8) +#define M_DMA_DSCRB_A_SIZE _SB_MAKEMASK(14, S_DMA_DSCRB_A_SIZE) +#define V_DMA_DSCRB_A_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_A_SIZE) +#define G_DMA_DSCRB_A_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_A_SIZE, M_DMA_DSCRB_A_SIZE) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define R_DMA_DSCRB_ADDR _SB_MAKE64(0x10) + +/* Note: Don't shift the address over, just mask it with the mask below */ +#define S_DMA_DSCRB_B_ADDR _SB_MAKE64(5) +#define M_DMA_DSCRB_B_ADDR _SB_MAKEMASK(35, S_DMA_DSCRB_B_ADDR) + +#define S_DMA_DSCRB_B_SIZE _SB_MAKE64(40) +#define M_DMA_DSCRB_B_SIZE _SB_MAKEMASK(9, S_DMA_DSCRB_B_SIZE) +#define V_DMA_DSCRB_B_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_B_SIZE) +#define G_DMA_DSCRB_B_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_B_SIZE, M_DMA_DSCRB_B_SIZE) + +#define M_DMA_DSCRB_B_VALID _SB_MAKEMASK1(49) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_DMA_DSCRB_PKT_SIZE_MSB _SB_MAKE64(48) +#define M_DMA_DSCRB_PKT_SIZE_MSB _SB_MAKEMASK(2, S_DMA_DSCRB_PKT_SIZE_MSB) +#define V_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE_MSB) +#define G_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE_MSB, M_DMA_DSCRB_PKT_SIZE_MSB) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define S_DMA_DSCRB_PKT_SIZE _SB_MAKE64(50) +#define M_DMA_DSCRB_PKT_SIZE _SB_MAKEMASK(14, S_DMA_DSCRB_PKT_SIZE) +#define V_DMA_DSCRB_PKT_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE) +#define G_DMA_DSCRB_PKT_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE, M_DMA_DSCRB_PKT_SIZE) + +/* + * from pass2 some bits in dscr_b are also used for rx status + */ +#define S_DMA_DSCRB_STATUS _SB_MAKE64(0) +#define M_DMA_DSCRB_STATUS _SB_MAKEMASK(1, S_DMA_DSCRB_STATUS) +#define V_DMA_DSCRB_STATUS(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_STATUS) +#define G_DMA_DSCRB_STATUS(x) _SB_GETVALUE(x, S_DMA_DSCRB_STATUS, M_DMA_DSCRB_STATUS) + +/* + * Ethernet Descriptor Status Bits (Table 7-15) + */ + +#define M_DMA_ETHRX_BADIP4CS _SB_MAKEMASK1(51) +#define M_DMA_ETHRX_DSCRERR _SB_MAKEMASK1(52) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +/* Note: This bit is in the DSCR_B options field */ +#define M_DMA_ETHRX_BADTCPCS _SB_MAKEMASK1(0) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +/* Note: These bits are in the DSCR_B options field */ +#define M_DMA_ETH_VLAN_FLAG _SB_MAKEMASK1(1) +#define M_DMA_ETH_CRC_FLAG _SB_MAKEMASK1(2) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define S_DMA_ETHRX_RXCH 53 +#define M_DMA_ETHRX_RXCH _SB_MAKEMASK(2, S_DMA_ETHRX_RXCH) +#define V_DMA_ETHRX_RXCH(x) _SB_MAKEVALUE(x, S_DMA_ETHRX_RXCH) +#define G_DMA_ETHRX_RXCH(x) _SB_GETVALUE(x, S_DMA_ETHRX_RXCH, M_DMA_ETHRX_RXCH) + +#define S_DMA_ETHRX_PKTTYPE 55 +#define M_DMA_ETHRX_PKTTYPE _SB_MAKEMASK(3, S_DMA_ETHRX_PKTTYPE) +#define V_DMA_ETHRX_PKTTYPE(x) _SB_MAKEVALUE(x, S_DMA_ETHRX_PKTTYPE) +#define G_DMA_ETHRX_PKTTYPE(x) _SB_GETVALUE(x, S_DMA_ETHRX_PKTTYPE, M_DMA_ETHRX_PKTTYPE) + +#define K_DMA_ETHRX_PKTTYPE_IPV4 0 +#define K_DMA_ETHRX_PKTTYPE_ARPV4 1 +#define K_DMA_ETHRX_PKTTYPE_802 2 +#define K_DMA_ETHRX_PKTTYPE_OTHER 3 +#define K_DMA_ETHRX_PKTTYPE_USER0 4 +#define K_DMA_ETHRX_PKTTYPE_USER1 5 +#define K_DMA_ETHRX_PKTTYPE_USER2 6 +#define K_DMA_ETHRX_PKTTYPE_USER3 7 + +#define M_DMA_ETHRX_MATCH_HASH _SB_MAKEMASK1(58) +#define M_DMA_ETHRX_MATCH_EXACT _SB_MAKEMASK1(59) +#define M_DMA_ETHRX_BCAST _SB_MAKEMASK1(60) +#define M_DMA_ETHRX_MCAST _SB_MAKEMASK1(61) +#define M_DMA_ETHRX_BAD _SB_MAKEMASK1(62) +#define M_DMA_ETHRX_SOP _SB_MAKEMASK1(63) + +/* + * Ethernet Transmit Status Bits (Table 7-16) + */ + +#define M_DMA_ETHTX_SOP _SB_MAKEMASK1(63) + +/* + * Ethernet Transmit Options (Table 7-17) + */ + +#define K_DMA_ETHTX_NOTSOP _SB_MAKE64(0x00) +#define K_DMA_ETHTX_APPENDCRC _SB_MAKE64(0x01) +#define K_DMA_ETHTX_REPLACECRC _SB_MAKE64(0x02) +#define K_DMA_ETHTX_APPENDCRC_APPENDPAD _SB_MAKE64(0x03) +#define K_DMA_ETHTX_APPENDVLAN_REPLACECRC _SB_MAKE64(0x04) +#define K_DMA_ETHTX_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x05) +#define K_DMA_ETHTX_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x6) +#define K_DMA_ETHTX_NOMODS _SB_MAKE64(0x07) +#define K_DMA_ETHTX_RESERVED1 _SB_MAKE64(0x08) +#define K_DMA_ETHTX_REPLACESADDR_APPENDCRC _SB_MAKE64(0x09) +#define K_DMA_ETHTX_REPLACESADDR_REPLACECRC _SB_MAKE64(0x0A) +#define K_DMA_ETHTX_REPLACESADDR_APPENDCRC_APPENDPAD _SB_MAKE64(0x0B) +#define K_DMA_ETHTX_REPLACESADDR_APPENDVLAN_REPLACECRC _SB_MAKE64(0x0C) +#define K_DMA_ETHTX_REPLACESADDR_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x0D) +#define K_DMA_ETHTX_REPLACESADDR_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x0E) +#define K_DMA_ETHTX_RESERVED2 _SB_MAKE64(0x0F) + +/* + * Serial Receive Options (Table 7-18) + */ +#define M_DMA_SERRX_CRC_ERROR _SB_MAKEMASK1(56) +#define M_DMA_SERRX_ABORT _SB_MAKEMASK1(57) +#define M_DMA_SERRX_OCTET_ERROR _SB_MAKEMASK1(58) +#define M_DMA_SERRX_LONGFRAME_ERROR _SB_MAKEMASK1(59) +#define M_DMA_SERRX_SHORTFRAME_ERROR _SB_MAKEMASK1(60) +#define M_DMA_SERRX_OVERRUN_ERROR _SB_MAKEMASK1(61) +#define M_DMA_SERRX_GOOD _SB_MAKEMASK1(62) +#define M_DMA_SERRX_SOP _SB_MAKEMASK1(63) + +/* + * Serial Transmit Status Bits (Table 7-20) + */ + +#define M_DMA_SERTX_FLAG _SB_MAKEMASK1(63) + +/* + * Serial Transmit Options (Table 7-21) + */ + +#define K_DMA_SERTX_RESERVED _SB_MAKEMASK1(0) +#define K_DMA_SERTX_APPENDCRC _SB_MAKEMASK1(1) +#define K_DMA_SERTX_APPENDPAD _SB_MAKEMASK1(2) +#define K_DMA_SERTX_ABORT _SB_MAKEMASK1(3) + + +/* ********************************************************************* + * Data Mover Registers + ********************************************************************* */ + +/* + * Data Mover Descriptor Base Address Register (Table 7-22) + * Register: DM_DSCR_BASE_0 + * Register: DM_DSCR_BASE_1 + * Register: DM_DSCR_BASE_2 + * Register: DM_DSCR_BASE_3 + */ + +#define M_DM_DSCR_BASE_MBZ _SB_MAKEMASK(4, 0) + +/* Note: Just mask the base address and then OR it in. */ +#define S_DM_DSCR_BASE_ADDR _SB_MAKE64(4) +#define M_DM_DSCR_BASE_ADDR _SB_MAKEMASK(36, S_DM_DSCR_BASE_ADDR) + +#define S_DM_DSCR_BASE_RINGSZ _SB_MAKE64(40) +#define M_DM_DSCR_BASE_RINGSZ _SB_MAKEMASK(16, S_DM_DSCR_BASE_RINGSZ) +#define V_DM_DSCR_BASE_RINGSZ(x) _SB_MAKEVALUE(x, S_DM_DSCR_BASE_RINGSZ) +#define G_DM_DSCR_BASE_RINGSZ(x) _SB_GETVALUE(x, S_DM_DSCR_BASE_RINGSZ, M_DM_DSCR_BASE_RINGSZ) + +#define S_DM_DSCR_BASE_PRIORITY _SB_MAKE64(56) +#define M_DM_DSCR_BASE_PRIORITY _SB_MAKEMASK(3, S_DM_DSCR_BASE_PRIORITY) +#define V_DM_DSCR_BASE_PRIORITY(x) _SB_MAKEVALUE(x, S_DM_DSCR_BASE_PRIORITY) +#define G_DM_DSCR_BASE_PRIORITY(x) _SB_GETVALUE(x, S_DM_DSCR_BASE_PRIORITY, M_DM_DSCR_BASE_PRIORITY) + +#define K_DM_DSCR_BASE_PRIORITY_1 0 +#define K_DM_DSCR_BASE_PRIORITY_2 1 +#define K_DM_DSCR_BASE_PRIORITY_4 2 +#define K_DM_DSCR_BASE_PRIORITY_8 3 +#define K_DM_DSCR_BASE_PRIORITY_16 4 + +#define M_DM_DSCR_BASE_ACTIVE _SB_MAKEMASK1(59) +#define M_DM_DSCR_BASE_INTERRUPT _SB_MAKEMASK1(60) +#define M_DM_DSCR_BASE_RESET _SB_MAKEMASK1(61) /* write register */ +#define M_DM_DSCR_BASE_ERROR _SB_MAKEMASK1(61) /* read register */ +#define M_DM_DSCR_BASE_ABORT _SB_MAKEMASK1(62) +#define M_DM_DSCR_BASE_ENABL _SB_MAKEMASK1(63) + +/* + * Data Mover Descriptor Count Register (Table 7-25) + */ + +/* no bitfields */ + +/* + * Data Mover Current Descriptor Address (Table 7-24) + * Register: DM_CUR_DSCR_ADDR_0 + * Register: DM_CUR_DSCR_ADDR_1 + * Register: DM_CUR_DSCR_ADDR_2 + * Register: DM_CUR_DSCR_ADDR_3 + */ + +#define S_DM_CUR_DSCR_DSCR_ADDR _SB_MAKE64(0) +#define M_DM_CUR_DSCR_DSCR_ADDR _SB_MAKEMASK(40, S_DM_CUR_DSCR_DSCR_ADDR) + +#define S_DM_CUR_DSCR_DSCR_COUNT _SB_MAKE64(48) +#define M_DM_CUR_DSCR_DSCR_COUNT _SB_MAKEMASK(16, S_DM_CUR_DSCR_DSCR_COUNT) +#define V_DM_CUR_DSCR_DSCR_COUNT(r) _SB_MAKEVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT) +#define G_DM_CUR_DSCR_DSCR_COUNT(r) _SB_GETVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT,\ + M_DM_CUR_DSCR_DSCR_COUNT) + + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +/* + * Data Mover Channel Partial Result Registers + * Register: DM_PARTIAL_0 + * Register: DM_PARTIAL_1 + * Register: DM_PARTIAL_2 + * Register: DM_PARTIAL_3 + */ +#define S_DM_PARTIAL_CRC_PARTIAL _SB_MAKE64(0) +#define M_DM_PARTIAL_CRC_PARTIAL _SB_MAKEMASK(32, S_DM_PARTIAL_CRC_PARTIAL) +#define V_DM_PARTIAL_CRC_PARTIAL(r) _SB_MAKEVALUE(r, S_DM_PARTIAL_CRC_PARTIAL) +#define G_DM_PARTIAL_CRC_PARTIAL(r) _SB_GETVALUE(r, S_DM_PARTIAL_CRC_PARTIAL,\ + M_DM_PARTIAL_CRC_PARTIAL) + +#define S_DM_PARTIAL_TCPCS_PARTIAL _SB_MAKE64(32) +#define M_DM_PARTIAL_TCPCS_PARTIAL _SB_MAKEMASK(16, S_DM_PARTIAL_TCPCS_PARTIAL) +#define V_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_MAKEVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL) +#define G_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_GETVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL,\ + M_DM_PARTIAL_TCPCS_PARTIAL) + +#define M_DM_PARTIAL_ODD_BYTE _SB_MAKEMASK1(48) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +/* + * Data Mover CRC Definition Registers + * Register: CRC_DEF_0 + * Register: CRC_DEF_1 + */ +#define S_CRC_DEF_CRC_INIT _SB_MAKE64(0) +#define M_CRC_DEF_CRC_INIT _SB_MAKEMASK(32, S_CRC_DEF_CRC_INIT) +#define V_CRC_DEF_CRC_INIT(r) _SB_MAKEVALUE(r, S_CRC_DEF_CRC_INIT) +#define G_CRC_DEF_CRC_INIT(r) _SB_GETVALUE(r, S_CRC_DEF_CRC_INIT,\ + M_CRC_DEF_CRC_INIT) + +#define S_CRC_DEF_CRC_POLY _SB_MAKE64(32) +#define M_CRC_DEF_CRC_POLY _SB_MAKEMASK(32, S_CRC_DEF_CRC_POLY) +#define V_CRC_DEF_CRC_POLY(r) _SB_MAKEVALUE(r, S_CRC_DEF_CRC_POLY) +#define G_CRC_DEF_CRC_POLY(r) _SB_GETVALUE(r, S_CRC_DEF_CRC_POLY,\ + M_CRC_DEF_CRC_POLY) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +/* + * Data Mover CRC/Checksum Definition Registers + * Register: CTCP_DEF_0 + * Register: CTCP_DEF_1 + */ +#define S_CTCP_DEF_CRC_TXOR _SB_MAKE64(0) +#define M_CTCP_DEF_CRC_TXOR _SB_MAKEMASK(32, S_CTCP_DEF_CRC_TXOR) +#define V_CTCP_DEF_CRC_TXOR(r) _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_TXOR) +#define G_CTCP_DEF_CRC_TXOR(r) _SB_GETVALUE(r, S_CTCP_DEF_CRC_TXOR,\ + M_CTCP_DEF_CRC_TXOR) + +#define S_CTCP_DEF_TCPCS_INIT _SB_MAKE64(32) +#define M_CTCP_DEF_TCPCS_INIT _SB_MAKEMASK(16, S_CTCP_DEF_TCPCS_INIT) +#define V_CTCP_DEF_TCPCS_INIT(r) _SB_MAKEVALUE(r, S_CTCP_DEF_TCPCS_INIT) +#define G_CTCP_DEF_TCPCS_INIT(r) _SB_GETVALUE(r, S_CTCP_DEF_TCPCS_INIT,\ + M_CTCP_DEF_TCPCS_INIT) + +#define S_CTCP_DEF_CRC_WIDTH _SB_MAKE64(48) +#define M_CTCP_DEF_CRC_WIDTH _SB_MAKEMASK(2, S_CTCP_DEF_CRC_WIDTH) +#define V_CTCP_DEF_CRC_WIDTH(r) _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_WIDTH) +#define G_CTCP_DEF_CRC_WIDTH(r) _SB_GETVALUE(r, S_CTCP_DEF_CRC_WIDTH,\ + M_CTCP_DEF_CRC_WIDTH) + +#define K_CTCP_DEF_CRC_WIDTH_4 0 +#define K_CTCP_DEF_CRC_WIDTH_2 1 +#define K_CTCP_DEF_CRC_WIDTH_1 2 + +#define M_CTCP_DEF_CRC_BIT_ORDER _SB_MAKEMASK1(50) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + + +/* + * Data Mover Descriptor Doubleword "A" (Table 7-26) + */ + +#define S_DM_DSCRA_DST_ADDR _SB_MAKE64(0) +#define M_DM_DSCRA_DST_ADDR _SB_MAKEMASK(40, S_DM_DSCRA_DST_ADDR) + +#define M_DM_DSCRA_UN_DEST _SB_MAKEMASK1(40) +#define M_DM_DSCRA_UN_SRC _SB_MAKEMASK1(41) +#define M_DM_DSCRA_INTERRUPT _SB_MAKEMASK1(42) +#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1) +#define M_DM_DSCRA_THROTTLE _SB_MAKEMASK1(43) +#endif /* up to 1250 PASS1 */ + +#define S_DM_DSCRA_DIR_DEST _SB_MAKE64(44) +#define M_DM_DSCRA_DIR_DEST _SB_MAKEMASK(2, S_DM_DSCRA_DIR_DEST) +#define V_DM_DSCRA_DIR_DEST(x) _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_DEST) +#define G_DM_DSCRA_DIR_DEST(x) _SB_GETVALUE(x, S_DM_DSCRA_DIR_DEST, M_DM_DSCRA_DIR_DEST) + +#define K_DM_DSCRA_DIR_DEST_INCR 0 +#define K_DM_DSCRA_DIR_DEST_DECR 1 +#define K_DM_DSCRA_DIR_DEST_CONST 2 + +#define V_DM_DSCRA_DIR_DEST_INCR _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_INCR, S_DM_DSCRA_DIR_DEST) +#define V_DM_DSCRA_DIR_DEST_DECR _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_DECR, S_DM_DSCRA_DIR_DEST) +#define V_DM_DSCRA_DIR_DEST_CONST _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_CONST, S_DM_DSCRA_DIR_DEST) + +#define S_DM_DSCRA_DIR_SRC _SB_MAKE64(46) +#define M_DM_DSCRA_DIR_SRC _SB_MAKEMASK(2, S_DM_DSCRA_DIR_SRC) +#define V_DM_DSCRA_DIR_SRC(x) _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_SRC) +#define G_DM_DSCRA_DIR_SRC(x) _SB_GETVALUE(x, S_DM_DSCRA_DIR_SRC, M_DM_DSCRA_DIR_SRC) + +#define K_DM_DSCRA_DIR_SRC_INCR 0 +#define K_DM_DSCRA_DIR_SRC_DECR 1 +#define K_DM_DSCRA_DIR_SRC_CONST 2 + +#define V_DM_DSCRA_DIR_SRC_INCR _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_INCR, S_DM_DSCRA_DIR_SRC) +#define V_DM_DSCRA_DIR_SRC_DECR _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_DECR, S_DM_DSCRA_DIR_SRC) +#define V_DM_DSCRA_DIR_SRC_CONST _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_CONST, S_DM_DSCRA_DIR_SRC) + + +#define M_DM_DSCRA_ZERO_MEM _SB_MAKEMASK1(48) +#define M_DM_DSCRA_PREFETCH _SB_MAKEMASK1(49) +#define M_DM_DSCRA_L2C_DEST _SB_MAKEMASK1(50) +#define M_DM_DSCRA_L2C_SRC _SB_MAKEMASK1(51) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_DM_DSCRA_RD_BKOFF _SB_MAKEMASK1(52) +#define M_DM_DSCRA_WR_BKOFF _SB_MAKEMASK1(53) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_DM_DSCRA_TCPCS_EN _SB_MAKEMASK1(54) +#define M_DM_DSCRA_TCPCS_RES _SB_MAKEMASK1(55) +#define M_DM_DSCRA_TCPCS_AP _SB_MAKEMASK1(56) +#define M_DM_DSCRA_CRC_EN _SB_MAKEMASK1(57) +#define M_DM_DSCRA_CRC_RES _SB_MAKEMASK1(58) +#define M_DM_DSCRA_CRC_AP _SB_MAKEMASK1(59) +#define M_DM_DSCRA_CRC_DFN _SB_MAKEMASK1(60) +#define M_DM_DSCRA_CRC_XBIT _SB_MAKEMASK1(61) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define M_DM_DSCRA_RESERVED2 _SB_MAKEMASK(3, 61) + +/* + * Data Mover Descriptor Doubleword "B" (Table 7-25) + */ + +#define S_DM_DSCRB_SRC_ADDR _SB_MAKE64(0) +#define M_DM_DSCRB_SRC_ADDR _SB_MAKEMASK(40, S_DM_DSCRB_SRC_ADDR) + +#define S_DM_DSCRB_SRC_LENGTH _SB_MAKE64(40) +#define M_DM_DSCRB_SRC_LENGTH _SB_MAKEMASK(20, S_DM_DSCRB_SRC_LENGTH) +#define V_DM_DSCRB_SRC_LENGTH(x) _SB_MAKEVALUE(x, S_DM_DSCRB_SRC_LENGTH) +#define G_DM_DSCRB_SRC_LENGTH(x) _SB_GETVALUE(x, S_DM_DSCRB_SRC_LENGTH, M_DM_DSCRB_SRC_LENGTH) + + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_genbus.h b/arch/mips/include/asm/sibyte/sb1250_genbus.h new file mode 100644 index 000000000000..94e9c7c8e783 --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_genbus.h @@ -0,0 +1,474 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * Generic Bus Constants File: sb1250_genbus.h + * + * This module contains constants and macros useful for + * manipulating the SB1250's Generic Bus interface + * + * SB1250 specification level: User's manual 10/21/02 + * BCM1280 specification level: User's Manual 11/14/03 + * + ********************************************************************* + * + * Copyright 2000, 2001, 2002, 2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_GENBUS_H +#define _SB1250_GENBUS_H + +#include "sb1250_defs.h" + +/* + * Generic Bus Region Configuration Registers (Table 11-4) + */ + +#define S_IO_RDY_ACTIVE 0 +#define M_IO_RDY_ACTIVE _SB_MAKEMASK1(S_IO_RDY_ACTIVE) + +#define S_IO_ENA_RDY 1 +#define M_IO_ENA_RDY _SB_MAKEMASK1(S_IO_ENA_RDY) + +#define S_IO_WIDTH_SEL 2 +#define M_IO_WIDTH_SEL _SB_MAKEMASK(2, S_IO_WIDTH_SEL) +#define K_IO_WIDTH_SEL_1 0 +#define K_IO_WIDTH_SEL_2 1 +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ + || SIBYTE_HDR_FEATURE_CHIP(1480) +#define K_IO_WIDTH_SEL_1L 2 +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ +#define K_IO_WIDTH_SEL_4 3 +#define V_IO_WIDTH_SEL(x) _SB_MAKEVALUE(x, S_IO_WIDTH_SEL) +#define G_IO_WIDTH_SEL(x) _SB_GETVALUE(x, S_IO_WIDTH_SEL, M_IO_WIDTH_SEL) + +#define S_IO_PARITY_ENA 4 +#define M_IO_PARITY_ENA _SB_MAKEMASK1(S_IO_PARITY_ENA) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ + || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_IO_BURST_EN 5 +#define M_IO_BURST_EN _SB_MAKEMASK1(S_IO_BURST_EN) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ +#define S_IO_PARITY_ODD 6 +#define M_IO_PARITY_ODD _SB_MAKEMASK1(S_IO_PARITY_ODD) +#define S_IO_NONMUX 7 +#define M_IO_NONMUX _SB_MAKEMASK1(S_IO_NONMUX) + +#define S_IO_TIMEOUT 8 +#define M_IO_TIMEOUT _SB_MAKEMASK(8, S_IO_TIMEOUT) +#define V_IO_TIMEOUT(x) _SB_MAKEVALUE(x, S_IO_TIMEOUT) +#define G_IO_TIMEOUT(x) _SB_GETVALUE(x, S_IO_TIMEOUT, M_IO_TIMEOUT) + +/* + * Generic Bus Region Size register (Table 11-5) + */ + +#define S_IO_MULT_SIZE 0 +#define M_IO_MULT_SIZE _SB_MAKEMASK(12, S_IO_MULT_SIZE) +#define V_IO_MULT_SIZE(x) _SB_MAKEVALUE(x, S_IO_MULT_SIZE) +#define G_IO_MULT_SIZE(x) _SB_GETVALUE(x, S_IO_MULT_SIZE, M_IO_MULT_SIZE) + +#define S_IO_REGSIZE 16 /* # bits to shift size for this reg */ + +/* + * Generic Bus Region Address (Table 11-6) + */ + +#define S_IO_START_ADDR 0 +#define M_IO_START_ADDR _SB_MAKEMASK(14, S_IO_START_ADDR) +#define V_IO_START_ADDR(x) _SB_MAKEVALUE(x, S_IO_START_ADDR) +#define G_IO_START_ADDR(x) _SB_GETVALUE(x, S_IO_START_ADDR, M_IO_START_ADDR) + +#define S_IO_ADDRBASE 16 /* # bits to shift addr for this reg */ + +#define M_IO_BLK_CACHE _SB_MAKEMASK1(15) + + +/* + * Generic Bus Timing 0 Registers (Table 11-7) + */ + +#define S_IO_ALE_WIDTH 0 +#define M_IO_ALE_WIDTH _SB_MAKEMASK(3, S_IO_ALE_WIDTH) +#define V_IO_ALE_WIDTH(x) _SB_MAKEVALUE(x, S_IO_ALE_WIDTH) +#define G_IO_ALE_WIDTH(x) _SB_GETVALUE(x, S_IO_ALE_WIDTH, M_IO_ALE_WIDTH) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ + || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_IO_EARLY_CS _SB_MAKEMASK1(3) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#define S_IO_ALE_TO_CS 4 +#define M_IO_ALE_TO_CS _SB_MAKEMASK(2, S_IO_ALE_TO_CS) +#define V_IO_ALE_TO_CS(x) _SB_MAKEVALUE(x, S_IO_ALE_TO_CS) +#define G_IO_ALE_TO_CS(x) _SB_GETVALUE(x, S_IO_ALE_TO_CS, M_IO_ALE_TO_CS) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ + || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_IO_BURST_WIDTH _SB_MAKE64(6) +#define M_IO_BURST_WIDTH _SB_MAKEMASK(2, S_IO_BURST_WIDTH) +#define V_IO_BURST_WIDTH(x) _SB_MAKEVALUE(x, S_IO_BURST_WIDTH) +#define G_IO_BURST_WIDTH(x) _SB_GETVALUE(x, S_IO_BURST_WIDTH, M_IO_BURST_WIDTH) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#define S_IO_CS_WIDTH 8 +#define M_IO_CS_WIDTH _SB_MAKEMASK(5, S_IO_CS_WIDTH) +#define V_IO_CS_WIDTH(x) _SB_MAKEVALUE(x, S_IO_CS_WIDTH) +#define G_IO_CS_WIDTH(x) _SB_GETVALUE(x, S_IO_CS_WIDTH, M_IO_CS_WIDTH) + +#define S_IO_RDY_SMPLE 13 +#define M_IO_RDY_SMPLE _SB_MAKEMASK(3, S_IO_RDY_SMPLE) +#define V_IO_RDY_SMPLE(x) _SB_MAKEVALUE(x, S_IO_RDY_SMPLE) +#define G_IO_RDY_SMPLE(x) _SB_GETVALUE(x, S_IO_RDY_SMPLE, M_IO_RDY_SMPLE) + + +/* + * Generic Bus Timing 1 Registers (Table 11-8) + */ + +#define S_IO_ALE_TO_WRITE 0 +#define M_IO_ALE_TO_WRITE _SB_MAKEMASK(3, S_IO_ALE_TO_WRITE) +#define V_IO_ALE_TO_WRITE(x) _SB_MAKEVALUE(x, S_IO_ALE_TO_WRITE) +#define G_IO_ALE_TO_WRITE(x) _SB_GETVALUE(x, S_IO_ALE_TO_WRITE, M_IO_ALE_TO_WRITE) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ + || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_IO_RDY_SYNC _SB_MAKEMASK1(3) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#define S_IO_WRITE_WIDTH 4 +#define M_IO_WRITE_WIDTH _SB_MAKEMASK(4, S_IO_WRITE_WIDTH) +#define V_IO_WRITE_WIDTH(x) _SB_MAKEVALUE(x, S_IO_WRITE_WIDTH) +#define G_IO_WRITE_WIDTH(x) _SB_GETVALUE(x, S_IO_WRITE_WIDTH, M_IO_WRITE_WIDTH) + +#define S_IO_IDLE_CYCLE 8 +#define M_IO_IDLE_CYCLE _SB_MAKEMASK(4, S_IO_IDLE_CYCLE) +#define V_IO_IDLE_CYCLE(x) _SB_MAKEVALUE(x, S_IO_IDLE_CYCLE) +#define G_IO_IDLE_CYCLE(x) _SB_GETVALUE(x, S_IO_IDLE_CYCLE, M_IO_IDLE_CYCLE) + +#define S_IO_OE_TO_CS 12 +#define M_IO_OE_TO_CS _SB_MAKEMASK(2, S_IO_OE_TO_CS) +#define V_IO_OE_TO_CS(x) _SB_MAKEVALUE(x, S_IO_OE_TO_CS) +#define G_IO_OE_TO_CS(x) _SB_GETVALUE(x, S_IO_OE_TO_CS, M_IO_OE_TO_CS) + +#define S_IO_CS_TO_OE 14 +#define M_IO_CS_TO_OE _SB_MAKEMASK(2, S_IO_CS_TO_OE) +#define V_IO_CS_TO_OE(x) _SB_MAKEVALUE(x, S_IO_CS_TO_OE) +#define G_IO_CS_TO_OE(x) _SB_GETVALUE(x, S_IO_CS_TO_OE, M_IO_CS_TO_OE) + +/* + * Generic Bus Interrupt Status Register (Table 11-9) + */ + +#define M_IO_CS_ERR_INT _SB_MAKEMASK(0, 8) +#define M_IO_CS0_ERR_INT _SB_MAKEMASK1(0) +#define M_IO_CS1_ERR_INT _SB_MAKEMASK1(1) +#define M_IO_CS2_ERR_INT _SB_MAKEMASK1(2) +#define M_IO_CS3_ERR_INT _SB_MAKEMASK1(3) +#define M_IO_CS4_ERR_INT _SB_MAKEMASK1(4) +#define M_IO_CS5_ERR_INT _SB_MAKEMASK1(5) +#define M_IO_CS6_ERR_INT _SB_MAKEMASK1(6) +#define M_IO_CS7_ERR_INT _SB_MAKEMASK1(7) + +#define M_IO_RD_PAR_INT _SB_MAKEMASK1(9) +#define M_IO_TIMEOUT_INT _SB_MAKEMASK1(10) +#define M_IO_ILL_ADDR_INT _SB_MAKEMASK1(11) +#define M_IO_MULT_CS_INT _SB_MAKEMASK1(12) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_IO_COH_ERR _SB_MAKEMASK1(14) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + + +/* + * Generic Bus Output Drive Control Register 0 (Table 14-18) + */ + +#define S_IO_SLEW0 0 +#define M_IO_SLEW0 _SB_MAKEMASK(2, S_IO_SLEW0) +#define V_IO_SLEW0(x) _SB_MAKEVALUE(x, S_IO_SLEW0) +#define G_IO_SLEW0(x) _SB_GETVALUE(x, S_IO_SLEW0, M_IO_SLEW0) + +#define S_IO_DRV_A 2 +#define M_IO_DRV_A _SB_MAKEMASK(2, S_IO_DRV_A) +#define V_IO_DRV_A(x) _SB_MAKEVALUE(x, S_IO_DRV_A) +#define G_IO_DRV_A(x) _SB_GETVALUE(x, S_IO_DRV_A, M_IO_DRV_A) + +#define S_IO_DRV_B 6 +#define M_IO_DRV_B _SB_MAKEMASK(2, S_IO_DRV_B) +#define V_IO_DRV_B(x) _SB_MAKEVALUE(x, S_IO_DRV_B) +#define G_IO_DRV_B(x) _SB_GETVALUE(x, S_IO_DRV_B, M_IO_DRV_B) + +#define S_IO_DRV_C 10 +#define M_IO_DRV_C _SB_MAKEMASK(2, S_IO_DRV_C) +#define V_IO_DRV_C(x) _SB_MAKEVALUE(x, S_IO_DRV_C) +#define G_IO_DRV_C(x) _SB_GETVALUE(x, S_IO_DRV_C, M_IO_DRV_C) + +#define S_IO_DRV_D 14 +#define M_IO_DRV_D _SB_MAKEMASK(2, S_IO_DRV_D) +#define V_IO_DRV_D(x) _SB_MAKEVALUE(x, S_IO_DRV_D) +#define G_IO_DRV_D(x) _SB_GETVALUE(x, S_IO_DRV_D, M_IO_DRV_D) + +/* + * Generic Bus Output Drive Control Register 1 (Table 14-19) + */ + +#define S_IO_DRV_E 2 +#define M_IO_DRV_E _SB_MAKEMASK(2, S_IO_DRV_E) +#define V_IO_DRV_E(x) _SB_MAKEVALUE(x, S_IO_DRV_E) +#define G_IO_DRV_E(x) _SB_GETVALUE(x, S_IO_DRV_E, M_IO_DRV_E) + +#define S_IO_DRV_F 6 +#define M_IO_DRV_F _SB_MAKEMASK(2, S_IO_DRV_F) +#define V_IO_DRV_F(x) _SB_MAKEVALUE(x, S_IO_DRV_F) +#define G_IO_DRV_F(x) _SB_GETVALUE(x, S_IO_DRV_F, M_IO_DRV_F) + +#define S_IO_SLEW1 8 +#define M_IO_SLEW1 _SB_MAKEMASK(2, S_IO_SLEW1) +#define V_IO_SLEW1(x) _SB_MAKEVALUE(x, S_IO_SLEW1) +#define G_IO_SLEW1(x) _SB_GETVALUE(x, S_IO_SLEW1, M_IO_SLEW1) + +#define S_IO_DRV_G 10 +#define M_IO_DRV_G _SB_MAKEMASK(2, S_IO_DRV_G) +#define V_IO_DRV_G(x) _SB_MAKEVALUE(x, S_IO_DRV_G) +#define G_IO_DRV_G(x) _SB_GETVALUE(x, S_IO_DRV_G, M_IO_DRV_G) + +#define S_IO_SLEW2 12 +#define M_IO_SLEW2 _SB_MAKEMASK(2, S_IO_SLEW2) +#define V_IO_SLEW2(x) _SB_MAKEVALUE(x, S_IO_SLEW2) +#define G_IO_SLEW2(x) _SB_GETVALUE(x, S_IO_SLEW2, M_IO_SLEW2) + +#define S_IO_DRV_H 14 +#define M_IO_DRV_H _SB_MAKEMASK(2, S_IO_DRV_H) +#define V_IO_DRV_H(x) _SB_MAKEVALUE(x, S_IO_DRV_H) +#define G_IO_DRV_H(x) _SB_GETVALUE(x, S_IO_DRV_H, M_IO_DRV_H) + +/* + * Generic Bus Output Drive Control Register 2 (Table 14-20) + */ + +#define S_IO_DRV_J 2 +#define M_IO_DRV_J _SB_MAKEMASK(2, S_IO_DRV_J) +#define V_IO_DRV_J(x) _SB_MAKEVALUE(x, S_IO_DRV_J) +#define G_IO_DRV_J(x) _SB_GETVALUE(x, S_IO_DRV_J, M_IO_DRV_J) + +#define S_IO_DRV_K 6 +#define M_IO_DRV_K _SB_MAKEMASK(2, S_IO_DRV_K) +#define V_IO_DRV_K(x) _SB_MAKEVALUE(x, S_IO_DRV_K) +#define G_IO_DRV_K(x) _SB_GETVALUE(x, S_IO_DRV_K, M_IO_DRV_K) + +#define S_IO_DRV_L 10 +#define M_IO_DRV_L _SB_MAKEMASK(2, S_IO_DRV_L) +#define V_IO_DRV_L(x) _SB_MAKEVALUE(x, S_IO_DRV_L) +#define G_IO_DRV_L(x) _SB_GETVALUE(x, S_IO_DRV_L, M_IO_DRV_L) + +#define S_IO_DRV_M 14 +#define M_IO_DRV_M _SB_MAKEMASK(2, S_IO_DRV_M) +#define V_IO_DRV_M(x) _SB_MAKEVALUE(x, S_IO_DRV_M) +#define G_IO_DRV_M(x) _SB_GETVALUE(x, S_IO_DRV_M, M_IO_DRV_M) + +/* + * Generic Bus Output Drive Control Register 3 (Table 14-21) + */ + +#define S_IO_SLEW3 0 +#define M_IO_SLEW3 _SB_MAKEMASK(2, S_IO_SLEW3) +#define V_IO_SLEW3(x) _SB_MAKEVALUE(x, S_IO_SLEW3) +#define G_IO_SLEW3(x) _SB_GETVALUE(x, S_IO_SLEW3, M_IO_SLEW3) + +#define S_IO_DRV_N 2 +#define M_IO_DRV_N _SB_MAKEMASK(2, S_IO_DRV_N) +#define V_IO_DRV_N(x) _SB_MAKEVALUE(x, S_IO_DRV_N) +#define G_IO_DRV_N(x) _SB_GETVALUE(x, S_IO_DRV_N, M_IO_DRV_N) + +#define S_IO_DRV_P 6 +#define M_IO_DRV_P _SB_MAKEMASK(2, S_IO_DRV_P) +#define V_IO_DRV_P(x) _SB_MAKEVALUE(x, S_IO_DRV_P) +#define G_IO_DRV_P(x) _SB_GETVALUE(x, S_IO_DRV_P, M_IO_DRV_P) + +#define S_IO_DRV_Q 10 +#define M_IO_DRV_Q _SB_MAKEMASK(2, S_IO_DRV_Q) +#define V_IO_DRV_Q(x) _SB_MAKEVALUE(x, S_IO_DRV_Q) +#define G_IO_DRV_Q(x) _SB_GETVALUE(x, S_IO_DRV_Q, M_IO_DRV_Q) + +#define S_IO_DRV_R 14 +#define M_IO_DRV_R _SB_MAKEMASK(2, S_IO_DRV_R) +#define V_IO_DRV_R(x) _SB_MAKEVALUE(x, S_IO_DRV_R) +#define G_IO_DRV_R(x) _SB_GETVALUE(x, S_IO_DRV_R, M_IO_DRV_R) + + +/* + * PCMCIA configuration register (Table 12-6) + */ + +#define M_PCMCIA_CFG_ATTRMEM _SB_MAKEMASK1(0) +#define M_PCMCIA_CFG_3VEN _SB_MAKEMASK1(1) +#define M_PCMCIA_CFG_5VEN _SB_MAKEMASK1(2) +#define M_PCMCIA_CFG_VPPEN _SB_MAKEMASK1(3) +#define M_PCMCIA_CFG_RESET _SB_MAKEMASK1(4) +#define M_PCMCIA_CFG_APWRONEN _SB_MAKEMASK1(5) +#define M_PCMCIA_CFG_CDMASK _SB_MAKEMASK1(6) +#define M_PCMCIA_CFG_WPMASK _SB_MAKEMASK1(7) +#define M_PCMCIA_CFG_RDYMASK _SB_MAKEMASK1(8) +#define M_PCMCIA_CFG_PWRCTL _SB_MAKEMASK1(9) + +#if SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_PCMCIA_MODE 16 +#define M_PCMCIA_MODE _SB_MAKEMASK(3, S_PCMCIA_MODE) +#define V_PCMCIA_MODE(x) _SB_MAKEVALUE(x, S_PCMCIA_MODE) +#define G_PCMCIA_MODE(x) _SB_GETVALUE(x, S_PCMCIA_MODE, M_PCMCIA_MODE) + +#define K_PCMCIA_MODE_PCMA_NOB 0 /* standard PCMCIA "A", no "B" */ +#define K_PCMCIA_MODE_IDEA_NOB 1 /* IDE "A", no "B" */ +#define K_PCMCIA_MODE_PCMIOA_NOB 2 /* PCMCIA with I/O "A", no "B" */ +#define K_PCMCIA_MODE_PCMA_PCMB 4 /* standard PCMCIA "A", standard PCMCIA "B" */ +#define K_PCMCIA_MODE_IDEA_PCMB 5 /* IDE "A", standard PCMCIA "B" */ +#define K_PCMCIA_MODE_PCMA_IDEB 6 /* standard PCMCIA "A", IDE "B" */ +#define K_PCMCIA_MODE_IDEA_IDEB 7 /* IDE "A", IDE "B" */ +#endif + + +/* + * PCMCIA status register (Table 12-7) + */ + +#define M_PCMCIA_STATUS_CD1 _SB_MAKEMASK1(0) +#define M_PCMCIA_STATUS_CD2 _SB_MAKEMASK1(1) +#define M_PCMCIA_STATUS_VS1 _SB_MAKEMASK1(2) +#define M_PCMCIA_STATUS_VS2 _SB_MAKEMASK1(3) +#define M_PCMCIA_STATUS_WP _SB_MAKEMASK1(4) +#define M_PCMCIA_STATUS_RDY _SB_MAKEMASK1(5) +#define M_PCMCIA_STATUS_3VEN _SB_MAKEMASK1(6) +#define M_PCMCIA_STATUS_5VEN _SB_MAKEMASK1(7) +#define M_PCMCIA_STATUS_CDCHG _SB_MAKEMASK1(8) +#define M_PCMCIA_STATUS_WPCHG _SB_MAKEMASK1(9) +#define M_PCMCIA_STATUS_RDYCHG _SB_MAKEMASK1(10) + +/* + * GPIO Interrupt Type Register (table 13-3) + */ + +#define K_GPIO_INTR_DISABLE 0 +#define K_GPIO_INTR_EDGE 1 +#define K_GPIO_INTR_LEVEL 2 +#define K_GPIO_INTR_SPLIT 3 + +#define S_GPIO_INTR_TYPEX(n) (((n)/2)*2) +#define M_GPIO_INTR_TYPEX(n) _SB_MAKEMASK(2, S_GPIO_INTR_TYPEX(n)) +#define V_GPIO_INTR_TYPEX(n, x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPEX(n)) +#define G_GPIO_INTR_TYPEX(n, x) _SB_GETVALUE(x, S_GPIO_INTR_TYPEX(n), M_GPIO_INTR_TYPEX(n)) + +#define S_GPIO_INTR_TYPE0 0 +#define M_GPIO_INTR_TYPE0 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE0) +#define V_GPIO_INTR_TYPE0(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE0) +#define G_GPIO_INTR_TYPE0(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE0, M_GPIO_INTR_TYPE0) + +#define S_GPIO_INTR_TYPE2 2 +#define M_GPIO_INTR_TYPE2 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE2) +#define V_GPIO_INTR_TYPE2(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE2) +#define G_GPIO_INTR_TYPE2(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE2, M_GPIO_INTR_TYPE2) + +#define S_GPIO_INTR_TYPE4 4 +#define M_GPIO_INTR_TYPE4 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE4) +#define V_GPIO_INTR_TYPE4(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE4) +#define G_GPIO_INTR_TYPE4(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE4, M_GPIO_INTR_TYPE4) + +#define S_GPIO_INTR_TYPE6 6 +#define M_GPIO_INTR_TYPE6 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE6) +#define V_GPIO_INTR_TYPE6(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE6) +#define G_GPIO_INTR_TYPE6(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE6, M_GPIO_INTR_TYPE6) + +#define S_GPIO_INTR_TYPE8 8 +#define M_GPIO_INTR_TYPE8 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE8) +#define V_GPIO_INTR_TYPE8(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE8) +#define G_GPIO_INTR_TYPE8(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE8, M_GPIO_INTR_TYPE8) + +#define S_GPIO_INTR_TYPE10 10 +#define M_GPIO_INTR_TYPE10 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE10) +#define V_GPIO_INTR_TYPE10(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE10) +#define G_GPIO_INTR_TYPE10(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE10, M_GPIO_INTR_TYPE10) + +#define S_GPIO_INTR_TYPE12 12 +#define M_GPIO_INTR_TYPE12 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE12) +#define V_GPIO_INTR_TYPE12(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE12) +#define G_GPIO_INTR_TYPE12(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE12, M_GPIO_INTR_TYPE12) + +#define S_GPIO_INTR_TYPE14 14 +#define M_GPIO_INTR_TYPE14 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE14) +#define V_GPIO_INTR_TYPE14(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE14) +#define G_GPIO_INTR_TYPE14(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE14, M_GPIO_INTR_TYPE14) + +#if SIBYTE_HDR_FEATURE_CHIP(1480) + +/* + * GPIO Interrupt Additional Type Register + */ + +#define K_GPIO_INTR_BOTHEDGE 0 +#define K_GPIO_INTR_RISEEDGE 1 +#define K_GPIO_INTR_UNPRED1 2 +#define K_GPIO_INTR_UNPRED2 3 + +#define S_GPIO_INTR_ATYPEX(n) (((n)/2)*2) +#define M_GPIO_INTR_ATYPEX(n) _SB_MAKEMASK(2, S_GPIO_INTR_ATYPEX(n)) +#define V_GPIO_INTR_ATYPEX(n, x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPEX(n)) +#define G_GPIO_INTR_ATYPEX(n, x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPEX(n), M_GPIO_INTR_ATYPEX(n)) + +#define S_GPIO_INTR_ATYPE0 0 +#define M_GPIO_INTR_ATYPE0 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE0) +#define V_GPIO_INTR_ATYPE0(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE0) +#define G_GPIO_INTR_ATYPE0(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE0, M_GPIO_INTR_ATYPE0) + +#define S_GPIO_INTR_ATYPE2 2 +#define M_GPIO_INTR_ATYPE2 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE2) +#define V_GPIO_INTR_ATYPE2(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE2) +#define G_GPIO_INTR_ATYPE2(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE2, M_GPIO_INTR_ATYPE2) + +#define S_GPIO_INTR_ATYPE4 4 +#define M_GPIO_INTR_ATYPE4 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE4) +#define V_GPIO_INTR_ATYPE4(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE4) +#define G_GPIO_INTR_ATYPE4(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE4, M_GPIO_INTR_ATYPE4) + +#define S_GPIO_INTR_ATYPE6 6 +#define M_GPIO_INTR_ATYPE6 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE6) +#define V_GPIO_INTR_ATYPE6(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE6) +#define G_GPIO_INTR_ATYPE6(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE6, M_GPIO_INTR_ATYPE6) + +#define S_GPIO_INTR_ATYPE8 8 +#define M_GPIO_INTR_ATYPE8 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE8) +#define V_GPIO_INTR_ATYPE8(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE8) +#define G_GPIO_INTR_ATYPE8(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE8, M_GPIO_INTR_ATYPE8) + +#define S_GPIO_INTR_ATYPE10 10 +#define M_GPIO_INTR_ATYPE10 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE10) +#define V_GPIO_INTR_ATYPE10(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE10) +#define G_GPIO_INTR_ATYPE10(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE10, M_GPIO_INTR_ATYPE10) + +#define S_GPIO_INTR_ATYPE12 12 +#define M_GPIO_INTR_ATYPE12 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE12) +#define V_GPIO_INTR_ATYPE12(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE12) +#define G_GPIO_INTR_ATYPE12(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE12, M_GPIO_INTR_ATYPE12) + +#define S_GPIO_INTR_ATYPE14 14 +#define M_GPIO_INTR_ATYPE14 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE14) +#define V_GPIO_INTR_ATYPE14(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE14) +#define G_GPIO_INTR_ATYPE14(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE14, M_GPIO_INTR_ATYPE14) +#endif + + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_int.h b/arch/mips/include/asm/sibyte/sb1250_int.h new file mode 100644 index 000000000000..f2850b4bcfd4 --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_int.h @@ -0,0 +1,248 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * Interrupt Mapper definitions File: sb1250_int.h + * + * This module contains constants for manipulating the SB1250's + * interrupt mapper and definitions for the interrupt sources. + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000, 2001, 2002, 2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_INT_H +#define _SB1250_INT_H + +#include "sb1250_defs.h" + +/* ********************************************************************* + * Interrupt Mapper Constants + ********************************************************************* */ + +/* + * Interrupt sources (Table 4-8, UM 0.2) + * + * First, the interrupt numbers. + */ + +#define K_INT_SOURCES 64 + +#define K_INT_WATCHDOG_TIMER_0 0 +#define K_INT_WATCHDOG_TIMER_1 1 +#define K_INT_TIMER_0 2 +#define K_INT_TIMER_1 3 +#define K_INT_TIMER_2 4 +#define K_INT_TIMER_3 5 +#define K_INT_SMB_0 6 +#define K_INT_SMB_1 7 +#define K_INT_UART_0 8 +#define K_INT_UART_1 9 +#define K_INT_SER_0 10 +#define K_INT_SER_1 11 +#define K_INT_PCMCIA 12 +#define K_INT_ADDR_TRAP 13 +#define K_INT_PERF_CNT 14 +#define K_INT_TRACE_FREEZE 15 +#define K_INT_BAD_ECC 16 +#define K_INT_COR_ECC 17 +#define K_INT_IO_BUS 18 +#define K_INT_MAC_0 19 +#define K_INT_MAC_1 20 +#define K_INT_MAC_2 21 +#define K_INT_DM_CH_0 22 +#define K_INT_DM_CH_1 23 +#define K_INT_DM_CH_2 24 +#define K_INT_DM_CH_3 25 +#define K_INT_MBOX_0 26 +#define K_INT_MBOX_1 27 +#define K_INT_MBOX_2 28 +#define K_INT_MBOX_3 29 +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define K_INT_CYCLE_CP0_INT 30 +#define K_INT_CYCLE_CP1_INT 31 +#endif /* 1250 PASS2 || 112x PASS1 */ +#define K_INT_GPIO_0 32 +#define K_INT_GPIO_1 33 +#define K_INT_GPIO_2 34 +#define K_INT_GPIO_3 35 +#define K_INT_GPIO_4 36 +#define K_INT_GPIO_5 37 +#define K_INT_GPIO_6 38 +#define K_INT_GPIO_7 39 +#define K_INT_GPIO_8 40 +#define K_INT_GPIO_9 41 +#define K_INT_GPIO_10 42 +#define K_INT_GPIO_11 43 +#define K_INT_GPIO_12 44 +#define K_INT_GPIO_13 45 +#define K_INT_GPIO_14 46 +#define K_INT_GPIO_15 47 +#define K_INT_LDT_FATAL 48 +#define K_INT_LDT_NONFATAL 49 +#define K_INT_LDT_SMI 50 +#define K_INT_LDT_NMI 51 +#define K_INT_LDT_INIT 52 +#define K_INT_LDT_STARTUP 53 +#define K_INT_LDT_EXT 54 +#define K_INT_PCI_ERROR 55 +#define K_INT_PCI_INTA 56 +#define K_INT_PCI_INTB 57 +#define K_INT_PCI_INTC 58 +#define K_INT_PCI_INTD 59 +#define K_INT_SPARE_2 60 +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define K_INT_MAC_0_CH1 61 +#define K_INT_MAC_1_CH1 62 +#define K_INT_MAC_2_CH1 63 +#endif /* 1250 PASS2 || 112x PASS1 */ + +/* + * Mask values for each interrupt + */ + +#define M_INT_WATCHDOG_TIMER_0 _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_0) +#define M_INT_WATCHDOG_TIMER_1 _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_1) +#define M_INT_TIMER_0 _SB_MAKEMASK1(K_INT_TIMER_0) +#define M_INT_TIMER_1 _SB_MAKEMASK1(K_INT_TIMER_1) +#define M_INT_TIMER_2 _SB_MAKEMASK1(K_INT_TIMER_2) +#define M_INT_TIMER_3 _SB_MAKEMASK1(K_INT_TIMER_3) +#define M_INT_SMB_0 _SB_MAKEMASK1(K_INT_SMB_0) +#define M_INT_SMB_1 _SB_MAKEMASK1(K_INT_SMB_1) +#define M_INT_UART_0 _SB_MAKEMASK1(K_INT_UART_0) +#define M_INT_UART_1 _SB_MAKEMASK1(K_INT_UART_1) +#define M_INT_SER_0 _SB_MAKEMASK1(K_INT_SER_0) +#define M_INT_SER_1 _SB_MAKEMASK1(K_INT_SER_1) +#define M_INT_PCMCIA _SB_MAKEMASK1(K_INT_PCMCIA) +#define M_INT_ADDR_TRAP _SB_MAKEMASK1(K_INT_ADDR_TRAP) +#define M_INT_PERF_CNT _SB_MAKEMASK1(K_INT_PERF_CNT) +#define M_INT_TRACE_FREEZE _SB_MAKEMASK1(K_INT_TRACE_FREEZE) +#define M_INT_BAD_ECC _SB_MAKEMASK1(K_INT_BAD_ECC) +#define M_INT_COR_ECC _SB_MAKEMASK1(K_INT_COR_ECC) +#define M_INT_IO_BUS _SB_MAKEMASK1(K_INT_IO_BUS) +#define M_INT_MAC_0 _SB_MAKEMASK1(K_INT_MAC_0) +#define M_INT_MAC_1 _SB_MAKEMASK1(K_INT_MAC_1) +#define M_INT_MAC_2 _SB_MAKEMASK1(K_INT_MAC_2) +#define M_INT_DM_CH_0 _SB_MAKEMASK1(K_INT_DM_CH_0) +#define M_INT_DM_CH_1 _SB_MAKEMASK1(K_INT_DM_CH_1) +#define M_INT_DM_CH_2 _SB_MAKEMASK1(K_INT_DM_CH_2) +#define M_INT_DM_CH_3 _SB_MAKEMASK1(K_INT_DM_CH_3) +#define M_INT_MBOX_0 _SB_MAKEMASK1(K_INT_MBOX_0) +#define M_INT_MBOX_1 _SB_MAKEMASK1(K_INT_MBOX_1) +#define M_INT_MBOX_2 _SB_MAKEMASK1(K_INT_MBOX_2) +#define M_INT_MBOX_3 _SB_MAKEMASK1(K_INT_MBOX_3) +#define M_INT_MBOX_ALL _SB_MAKEMASK(4, K_INT_MBOX_0) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define M_INT_CYCLE_CP0_INT _SB_MAKEMASK1(K_INT_CYCLE_CP0_INT) +#define M_INT_CYCLE_CP1_INT _SB_MAKEMASK1(K_INT_CYCLE_CP1_INT) +#endif /* 1250 PASS2 || 112x PASS1 */ +#define M_INT_GPIO_0 _SB_MAKEMASK1(K_INT_GPIO_0) +#define M_INT_GPIO_1 _SB_MAKEMASK1(K_INT_GPIO_1) +#define M_INT_GPIO_2 _SB_MAKEMASK1(K_INT_GPIO_2) +#define M_INT_GPIO_3 _SB_MAKEMASK1(K_INT_GPIO_3) +#define M_INT_GPIO_4 _SB_MAKEMASK1(K_INT_GPIO_4) +#define M_INT_GPIO_5 _SB_MAKEMASK1(K_INT_GPIO_5) +#define M_INT_GPIO_6 _SB_MAKEMASK1(K_INT_GPIO_6) +#define M_INT_GPIO_7 _SB_MAKEMASK1(K_INT_GPIO_7) +#define M_INT_GPIO_8 _SB_MAKEMASK1(K_INT_GPIO_8) +#define M_INT_GPIO_9 _SB_MAKEMASK1(K_INT_GPIO_9) +#define M_INT_GPIO_10 _SB_MAKEMASK1(K_INT_GPIO_10) +#define M_INT_GPIO_11 _SB_MAKEMASK1(K_INT_GPIO_11) +#define M_INT_GPIO_12 _SB_MAKEMASK1(K_INT_GPIO_12) +#define M_INT_GPIO_13 _SB_MAKEMASK1(K_INT_GPIO_13) +#define M_INT_GPIO_14 _SB_MAKEMASK1(K_INT_GPIO_14) +#define M_INT_GPIO_15 _SB_MAKEMASK1(K_INT_GPIO_15) +#define M_INT_LDT_FATAL _SB_MAKEMASK1(K_INT_LDT_FATAL) +#define M_INT_LDT_NONFATAL _SB_MAKEMASK1(K_INT_LDT_NONFATAL) +#define M_INT_LDT_SMI _SB_MAKEMASK1(K_INT_LDT_SMI) +#define M_INT_LDT_NMI _SB_MAKEMASK1(K_INT_LDT_NMI) +#define M_INT_LDT_INIT _SB_MAKEMASK1(K_INT_LDT_INIT) +#define M_INT_LDT_STARTUP _SB_MAKEMASK1(K_INT_LDT_STARTUP) +#define M_INT_LDT_EXT _SB_MAKEMASK1(K_INT_LDT_EXT) +#define M_INT_PCI_ERROR _SB_MAKEMASK1(K_INT_PCI_ERROR) +#define M_INT_PCI_INTA _SB_MAKEMASK1(K_INT_PCI_INTA) +#define M_INT_PCI_INTB _SB_MAKEMASK1(K_INT_PCI_INTB) +#define M_INT_PCI_INTC _SB_MAKEMASK1(K_INT_PCI_INTC) +#define M_INT_PCI_INTD _SB_MAKEMASK1(K_INT_PCI_INTD) +#define M_INT_SPARE_2 _SB_MAKEMASK1(K_INT_SPARE_2) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define M_INT_MAC_0_CH1 _SB_MAKEMASK1(K_INT_MAC_0_CH1) +#define M_INT_MAC_1_CH1 _SB_MAKEMASK1(K_INT_MAC_1_CH1) +#define M_INT_MAC_2_CH1 _SB_MAKEMASK1(K_INT_MAC_2_CH1) +#endif /* 1250 PASS2 || 112x PASS1 */ + +/* + * Interrupt mappings + */ + +#define K_INT_MAP_I0 0 /* interrupt pins on processor */ +#define K_INT_MAP_I1 1 +#define K_INT_MAP_I2 2 +#define K_INT_MAP_I3 3 +#define K_INT_MAP_I4 4 +#define K_INT_MAP_I5 5 +#define K_INT_MAP_NMI 6 /* nonmaskable */ +#define K_INT_MAP_DINT 7 /* debug interrupt */ + +/* + * LDT Interrupt Set Register (table 4-5) + */ + +#define S_INT_LDT_INTMSG 0 +#define M_INT_LDT_INTMSG _SB_MAKEMASK(3, S_INT_LDT_INTMSG) +#define V_INT_LDT_INTMSG(x) _SB_MAKEVALUE(x, S_INT_LDT_INTMSG) +#define G_INT_LDT_INTMSG(x) _SB_GETVALUE(x, S_INT_LDT_INTMSG, M_INT_LDT_INTMSG) + +#define K_INT_LDT_INTMSG_FIXED 0 +#define K_INT_LDT_INTMSG_ARBITRATED 1 +#define K_INT_LDT_INTMSG_SMI 2 +#define K_INT_LDT_INTMSG_NMI 3 +#define K_INT_LDT_INTMSG_INIT 4 +#define K_INT_LDT_INTMSG_STARTUP 5 +#define K_INT_LDT_INTMSG_EXTINT 6 +#define K_INT_LDT_INTMSG_RESERVED 7 + +#define M_INT_LDT_EDGETRIGGER 0 +#define M_INT_LDT_LEVELTRIGGER _SB_MAKEMASK1(3) + +#define M_INT_LDT_PHYSICALDEST 0 +#define M_INT_LDT_LOGICALDEST _SB_MAKEMASK1(4) + +#define S_INT_LDT_INTDEST 5 +#define M_INT_LDT_INTDEST _SB_MAKEMASK(10, S_INT_LDT_INTDEST) +#define V_INT_LDT_INTDEST(x) _SB_MAKEVALUE(x, S_INT_LDT_INTDEST) +#define G_INT_LDT_INTDEST(x) _SB_GETVALUE(x, S_INT_LDT_INTDEST, M_INT_LDT_INTDEST) + +#define S_INT_LDT_VECTOR 13 +#define M_INT_LDT_VECTOR _SB_MAKEMASK(8, S_INT_LDT_VECTOR) +#define V_INT_LDT_VECTOR(x) _SB_MAKEVALUE(x, S_INT_LDT_VECTOR) +#define G_INT_LDT_VECTOR(x) _SB_GETVALUE(x, S_INT_LDT_VECTOR, M_INT_LDT_VECTOR) + +/* + * Vector format (Table 4-6) + */ + +#define M_LDTVECT_RAISEINT 0x00 +#define M_LDTVECT_RAISEMBOX 0x40 + + +#endif /* 1250/112x */ diff --git a/arch/mips/include/asm/sibyte/sb1250_l2c.h b/arch/mips/include/asm/sibyte/sb1250_l2c.h new file mode 100644 index 000000000000..6554dcf05cfe --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_l2c.h @@ -0,0 +1,131 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * L2 Cache constants and macros File: sb1250_l2c.h + * + * This module contains constants useful for manipulating the + * level 2 cache. + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_L2C_H +#define _SB1250_L2C_H + +#include "sb1250_defs.h" + +/* + * Level 2 Cache Tag register (Table 5-3) + */ + +#define S_L2C_TAG_MBZ 0 +#define M_L2C_TAG_MBZ _SB_MAKEMASK(5, S_L2C_TAG_MBZ) + +#define S_L2C_TAG_INDEX 5 +#define M_L2C_TAG_INDEX _SB_MAKEMASK(12, S_L2C_TAG_INDEX) +#define V_L2C_TAG_INDEX(x) _SB_MAKEVALUE(x, S_L2C_TAG_INDEX) +#define G_L2C_TAG_INDEX(x) _SB_GETVALUE(x, S_L2C_TAG_INDEX, M_L2C_TAG_INDEX) + +#define S_L2C_TAG_TAG 17 +#define M_L2C_TAG_TAG _SB_MAKEMASK(23, S_L2C_TAG_TAG) +#define V_L2C_TAG_TAG(x) _SB_MAKEVALUE(x, S_L2C_TAG_TAG) +#define G_L2C_TAG_TAG(x) _SB_GETVALUE(x, S_L2C_TAG_TAG, M_L2C_TAG_TAG) + +#define S_L2C_TAG_ECC 40 +#define M_L2C_TAG_ECC _SB_MAKEMASK(6, S_L2C_TAG_ECC) +#define V_L2C_TAG_ECC(x) _SB_MAKEVALUE(x, S_L2C_TAG_ECC) +#define G_L2C_TAG_ECC(x) _SB_GETVALUE(x, S_L2C_TAG_ECC, M_L2C_TAG_ECC) + +#define S_L2C_TAG_WAY 46 +#define M_L2C_TAG_WAY _SB_MAKEMASK(2, S_L2C_TAG_WAY) +#define V_L2C_TAG_WAY(x) _SB_MAKEVALUE(x, S_L2C_TAG_WAY) +#define G_L2C_TAG_WAY(x) _SB_GETVALUE(x, S_L2C_TAG_WAY, M_L2C_TAG_WAY) + +#define M_L2C_TAG_DIRTY _SB_MAKEMASK1(48) +#define M_L2C_TAG_VALID _SB_MAKEMASK1(49) + +/* + * Format of level 2 cache management address (table 5-2) + */ + +#define S_L2C_MGMT_INDEX 5 +#define M_L2C_MGMT_INDEX _SB_MAKEMASK(12, S_L2C_MGMT_INDEX) +#define V_L2C_MGMT_INDEX(x) _SB_MAKEVALUE(x, S_L2C_MGMT_INDEX) +#define G_L2C_MGMT_INDEX(x) _SB_GETVALUE(x, S_L2C_MGMT_INDEX, M_L2C_MGMT_INDEX) + +#define S_L2C_MGMT_QUADRANT 15 +#define M_L2C_MGMT_QUADRANT _SB_MAKEMASK(2, S_L2C_MGMT_QUADRANT) +#define V_L2C_MGMT_QUADRANT(x) _SB_MAKEVALUE(x, S_L2C_MGMT_QUADRANT) +#define G_L2C_MGMT_QUADRANT(x) _SB_GETVALUE(x, S_L2C_MGMT_QUADRANT, M_L2C_MGMT_QUADRANT) + +#define S_L2C_MGMT_HALF 16 +#define M_L2C_MGMT_HALF _SB_MAKEMASK(1, S_L2C_MGMT_HALF) + +#define S_L2C_MGMT_WAY 17 +#define M_L2C_MGMT_WAY _SB_MAKEMASK(2, S_L2C_MGMT_WAY) +#define V_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x, S_L2C_MGMT_WAY) +#define G_L2C_MGMT_WAY(x) _SB_GETVALUE(x, S_L2C_MGMT_WAY, M_L2C_MGMT_WAY) + +#define S_L2C_MGMT_ECC_DIAG 21 +#define M_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2, S_L2C_MGMT_ECC_DIAG) +#define V_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x, S_L2C_MGMT_ECC_DIAG) +#define G_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x, S_L2C_MGMT_ECC_DIAG, M_L2C_MGMT_ECC_DIAG) + +#define S_L2C_MGMT_TAG 23 +#define M_L2C_MGMT_TAG _SB_MAKEMASK(4, S_L2C_MGMT_TAG) +#define V_L2C_MGMT_TAG(x) _SB_MAKEVALUE(x, S_L2C_MGMT_TAG) +#define G_L2C_MGMT_TAG(x) _SB_GETVALUE(x, S_L2C_MGMT_TAG, M_L2C_MGMT_TAG) + +#define M_L2C_MGMT_DIRTY _SB_MAKEMASK1(19) +#define M_L2C_MGMT_VALID _SB_MAKEMASK1(20) + +#define A_L2C_MGMT_TAG_BASE 0x00D0000000 + +#define L2C_ENTRIES_PER_WAY 4096 +#define L2C_NUM_WAYS 4 + + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +/* + * L2 Read Misc. register (A_L2_READ_MISC) + */ +#define S_L2C_MISC_NO_WAY 10 +#define M_L2C_MISC_NO_WAY _SB_MAKEMASK(4, S_L2C_MISC_NO_WAY) +#define V_L2C_MISC_NO_WAY(x) _SB_MAKEVALUE(x, S_L2C_MISC_NO_WAY) +#define G_L2C_MISC_NO_WAY(x) _SB_GETVALUE(x, S_L2C_MISC_NO_WAY, M_L2C_MISC_NO_WAY) + +#define M_L2C_MISC_ECC_CLEANUP_DIS _SB_MAKEMASK1(9) +#define M_L2C_MISC_MC_PRIO_LOW _SB_MAKEMASK1(8) +#define M_L2C_MISC_SOFT_DISABLE_T _SB_MAKEMASK1(7) +#define M_L2C_MISC_SOFT_DISABLE_B _SB_MAKEMASK1(6) +#define M_L2C_MISC_SOFT_DISABLE_R _SB_MAKEMASK1(5) +#define M_L2C_MISC_SOFT_DISABLE_L _SB_MAKEMASK1(4) +#define M_L2C_MISC_SCACHE_DISABLE_T _SB_MAKEMASK1(3) +#define M_L2C_MISC_SCACHE_DISABLE_B _SB_MAKEMASK1(2) +#define M_L2C_MISC_SCACHE_DISABLE_R _SB_MAKEMASK1(1) +#define M_L2C_MISC_SCACHE_DISABLE_L _SB_MAKEMASK1(0) +#endif /* 1250 PASS3 || 112x PASS1 */ + + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_ldt.h b/arch/mips/include/asm/sibyte/sb1250_ldt.h new file mode 100644 index 000000000000..081e8b1c4ad0 --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_ldt.h @@ -0,0 +1,423 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * LDT constants File: sb1250_ldt.h + * + * This module contains constants and macros to describe + * the LDT interface on the SB1250. + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000, 2001, 2002, 2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_LDT_H +#define _SB1250_LDT_H + +#include "sb1250_defs.h" + +#define K_LDT_VENDOR_SIBYTE 0x166D +#define K_LDT_DEVICE_SB1250 0x0002 + +/* + * LDT Interface Type 1 (bridge) configuration header + */ + +#define R_LDT_TYPE1_DEVICEID 0x0000 +#define R_LDT_TYPE1_CMDSTATUS 0x0004 +#define R_LDT_TYPE1_CLASSREV 0x0008 +#define R_LDT_TYPE1_DEVHDR 0x000C +#define R_LDT_TYPE1_BAR0 0x0010 /* not used */ +#define R_LDT_TYPE1_BAR1 0x0014 /* not used */ + +#define R_LDT_TYPE1_BUSID 0x0018 /* bus ID register */ +#define R_LDT_TYPE1_SECSTATUS 0x001C /* secondary status / I/O base/limit */ +#define R_LDT_TYPE1_MEMLIMIT 0x0020 +#define R_LDT_TYPE1_PREFETCH 0x0024 +#define R_LDT_TYPE1_PREF_BASE 0x0028 +#define R_LDT_TYPE1_PREF_LIMIT 0x002C +#define R_LDT_TYPE1_IOLIMIT 0x0030 +#define R_LDT_TYPE1_CAPPTR 0x0034 +#define R_LDT_TYPE1_ROMADDR 0x0038 +#define R_LDT_TYPE1_BRCTL 0x003C +#define R_LDT_TYPE1_CMD 0x0040 +#define R_LDT_TYPE1_LINKCTRL 0x0044 +#define R_LDT_TYPE1_LINKFREQ 0x0048 +#define R_LDT_TYPE1_RESERVED1 0x004C +#define R_LDT_TYPE1_SRICMD 0x0050 +#define R_LDT_TYPE1_SRITXNUM 0x0054 +#define R_LDT_TYPE1_SRIRXNUM 0x0058 +#define R_LDT_TYPE1_ERRSTATUS 0x0068 +#define R_LDT_TYPE1_SRICTRL 0x006C +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define R_LDT_TYPE1_ADDSTATUS 0x0070 +#endif /* 1250 PASS2 || 112x PASS1 */ +#define R_LDT_TYPE1_TXBUFCNT 0x00C8 +#define R_LDT_TYPE1_EXPCRC 0x00DC +#define R_LDT_TYPE1_RXCRC 0x00F0 + + +/* + * LDT Device ID register + */ + +#define S_LDT_DEVICEID_VENDOR 0 +#define M_LDT_DEVICEID_VENDOR _SB_MAKEMASK_32(16, S_LDT_DEVICEID_VENDOR) +#define V_LDT_DEVICEID_VENDOR(x) _SB_MAKEVALUE_32(x, S_LDT_DEVICEID_VENDOR) +#define G_LDT_DEVICEID_VENDOR(x) _SB_GETVALUE_32(x, S_LDT_DEVICEID_VENDOR, M_LDT_DEVICEID_VENDOR) + +#define S_LDT_DEVICEID_DEVICEID 16 +#define M_LDT_DEVICEID_DEVICEID _SB_MAKEMASK_32(16, S_LDT_DEVICEID_DEVICEID) +#define V_LDT_DEVICEID_DEVICEID(x) _SB_MAKEVALUE_32(x, S_LDT_DEVICEID_DEVICEID) +#define G_LDT_DEVICEID_DEVICEID(x) _SB_GETVALUE_32(x, S_LDT_DEVICEID_DEVICEID, M_LDT_DEVICEID_DEVICEID) + + +/* + * LDT Command Register (Table 8-13) + */ + +#define M_LDT_CMD_IOSPACE_EN _SB_MAKEMASK1_32(0) +#define M_LDT_CMD_MEMSPACE_EN _SB_MAKEMASK1_32(1) +#define M_LDT_CMD_MASTER_EN _SB_MAKEMASK1_32(2) +#define M_LDT_CMD_SPECCYC_EN _SB_MAKEMASK1_32(3) +#define M_LDT_CMD_MEMWRINV_EN _SB_MAKEMASK1_32(4) +#define M_LDT_CMD_VGAPALSNP_EN _SB_MAKEMASK1_32(5) +#define M_LDT_CMD_PARERRRESP _SB_MAKEMASK1_32(6) +#define M_LDT_CMD_WAITCYCCTRL _SB_MAKEMASK1_32(7) +#define M_LDT_CMD_SERR_EN _SB_MAKEMASK1_32(8) +#define M_LDT_CMD_FASTB2B_EN _SB_MAKEMASK1_32(9) + +/* + * LDT class and revision registers + */ + +#define S_LDT_CLASSREV_REV 0 +#define M_LDT_CLASSREV_REV _SB_MAKEMASK_32(8, S_LDT_CLASSREV_REV) +#define V_LDT_CLASSREV_REV(x) _SB_MAKEVALUE_32(x, S_LDT_CLASSREV_REV) +#define G_LDT_CLASSREV_REV(x) _SB_GETVALUE_32(x, S_LDT_CLASSREV_REV, M_LDT_CLASSREV_REV) + +#define S_LDT_CLASSREV_CLASS 8 +#define M_LDT_CLASSREV_CLASS _SB_MAKEMASK_32(24, S_LDT_CLASSREV_CLASS) +#define V_LDT_CLASSREV_CLASS(x) _SB_MAKEVALUE_32(x, S_LDT_CLASSREV_CLASS) +#define G_LDT_CLASSREV_CLASS(x) _SB_GETVALUE_32(x, S_LDT_CLASSREV_CLASS, M_LDT_CLASSREV_CLASS) + +#define K_LDT_REV 0x01 +#define K_LDT_CLASS 0x060000 + +/* + * Device Header (offset 0x0C) + */ + +#define S_LDT_DEVHDR_CLINESZ 0 +#define M_LDT_DEVHDR_CLINESZ _SB_MAKEMASK_32(8, S_LDT_DEVHDR_CLINESZ) +#define V_LDT_DEVHDR_CLINESZ(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_CLINESZ) +#define G_LDT_DEVHDR_CLINESZ(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_CLINESZ, M_LDT_DEVHDR_CLINESZ) + +#define S_LDT_DEVHDR_LATTMR 8 +#define M_LDT_DEVHDR_LATTMR _SB_MAKEMASK_32(8, S_LDT_DEVHDR_LATTMR) +#define V_LDT_DEVHDR_LATTMR(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_LATTMR) +#define G_LDT_DEVHDR_LATTMR(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_LATTMR, M_LDT_DEVHDR_LATTMR) + +#define S_LDT_DEVHDR_HDRTYPE 16 +#define M_LDT_DEVHDR_HDRTYPE _SB_MAKEMASK_32(8, S_LDT_DEVHDR_HDRTYPE) +#define V_LDT_DEVHDR_HDRTYPE(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_HDRTYPE) +#define G_LDT_DEVHDR_HDRTYPE(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_HDRTYPE, M_LDT_DEVHDR_HDRTYPE) + +#define K_LDT_DEVHDR_HDRTYPE_TYPE1 1 + +#define S_LDT_DEVHDR_BIST 24 +#define M_LDT_DEVHDR_BIST _SB_MAKEMASK_32(8, S_LDT_DEVHDR_BIST) +#define V_LDT_DEVHDR_BIST(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_BIST) +#define G_LDT_DEVHDR_BIST(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_BIST, M_LDT_DEVHDR_BIST) + + + +/* + * LDT Status Register (Table 8-14). Note that these constants + * assume you've read the command and status register + * together (32-bit read at offset 0x04) + * + * These bits also apply to the secondary status + * register (Table 8-15), offset 0x1C + */ + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define M_LDT_STATUS_VGAEN _SB_MAKEMASK1_32(3) +#endif /* 1250 PASS2 || 112x PASS1 */ +#define M_LDT_STATUS_CAPLIST _SB_MAKEMASK1_32(20) +#define M_LDT_STATUS_66MHZCAP _SB_MAKEMASK1_32(21) +#define M_LDT_STATUS_RESERVED2 _SB_MAKEMASK1_32(22) +#define M_LDT_STATUS_FASTB2BCAP _SB_MAKEMASK1_32(23) +#define M_LDT_STATUS_MSTRDPARERR _SB_MAKEMASK1_32(24) + +#define S_LDT_STATUS_DEVSELTIMING 25 +#define M_LDT_STATUS_DEVSELTIMING _SB_MAKEMASK_32(2, S_LDT_STATUS_DEVSELTIMING) +#define V_LDT_STATUS_DEVSELTIMING(x) _SB_MAKEVALUE_32(x, S_LDT_STATUS_DEVSELTIMING) +#define G_LDT_STATUS_DEVSELTIMING(x) _SB_GETVALUE_32(x, S_LDT_STATUS_DEVSELTIMING, M_LDT_STATUS_DEVSELTIMING) + +#define M_LDT_STATUS_SIGDTGTABORT _SB_MAKEMASK1_32(27) +#define M_LDT_STATUS_RCVDTGTABORT _SB_MAKEMASK1_32(28) +#define M_LDT_STATUS_RCVDMSTRABORT _SB_MAKEMASK1_32(29) +#define M_LDT_STATUS_SIGDSERR _SB_MAKEMASK1_32(30) +#define M_LDT_STATUS_DETPARERR _SB_MAKEMASK1_32(31) + +/* + * Bridge Control Register (Table 8-16). Note that these + * constants assume you've read the register as a 32-bit + * read (offset 0x3C) + */ + +#define M_LDT_BRCTL_PARERRRESP_EN _SB_MAKEMASK1_32(16) +#define M_LDT_BRCTL_SERR_EN _SB_MAKEMASK1_32(17) +#define M_LDT_BRCTL_ISA_EN _SB_MAKEMASK1_32(18) +#define M_LDT_BRCTL_VGA_EN _SB_MAKEMASK1_32(19) +#define M_LDT_BRCTL_MSTRABORTMODE _SB_MAKEMASK1_32(21) +#define M_LDT_BRCTL_SECBUSRESET _SB_MAKEMASK1_32(22) +#define M_LDT_BRCTL_FASTB2B_EN _SB_MAKEMASK1_32(23) +#define M_LDT_BRCTL_PRIDISCARD _SB_MAKEMASK1_32(24) +#define M_LDT_BRCTL_SECDISCARD _SB_MAKEMASK1_32(25) +#define M_LDT_BRCTL_DISCARDSTAT _SB_MAKEMASK1_32(26) +#define M_LDT_BRCTL_DISCARDSERR_EN _SB_MAKEMASK1_32(27) + +/* + * LDT Command Register (Table 8-17). Note that these constants + * assume you've read the command and status register together + * 32-bit read at offset 0x40 + */ + +#define M_LDT_CMD_WARMRESET _SB_MAKEMASK1_32(16) +#define M_LDT_CMD_DOUBLEENDED _SB_MAKEMASK1_32(17) + +#define S_LDT_CMD_CAPTYPE 29 +#define M_LDT_CMD_CAPTYPE _SB_MAKEMASK_32(3, S_LDT_CMD_CAPTYPE) +#define V_LDT_CMD_CAPTYPE(x) _SB_MAKEVALUE_32(x, S_LDT_CMD_CAPTYPE) +#define G_LDT_CMD_CAPTYPE(x) _SB_GETVALUE_32(x, S_LDT_CMD_CAPTYPE, M_LDT_CMD_CAPTYPE) + +/* + * LDT link control register (Table 8-18), and (Table 8-19) + */ + +#define M_LDT_LINKCTRL_CAPSYNCFLOOD_EN _SB_MAKEMASK1_32(1) +#define M_LDT_LINKCTRL_CRCSTARTTEST _SB_MAKEMASK1_32(2) +#define M_LDT_LINKCTRL_CRCFORCEERR _SB_MAKEMASK1_32(3) +#define M_LDT_LINKCTRL_LINKFAIL _SB_MAKEMASK1_32(4) +#define M_LDT_LINKCTRL_INITDONE _SB_MAKEMASK1_32(5) +#define M_LDT_LINKCTRL_EOC _SB_MAKEMASK1_32(6) +#define M_LDT_LINKCTRL_XMITOFF _SB_MAKEMASK1_32(7) + +#define S_LDT_LINKCTRL_CRCERR 8 +#define M_LDT_LINKCTRL_CRCERR _SB_MAKEMASK_32(4, S_LDT_LINKCTRL_CRCERR) +#define V_LDT_LINKCTRL_CRCERR(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_CRCERR) +#define G_LDT_LINKCTRL_CRCERR(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_CRCERR, M_LDT_LINKCTRL_CRCERR) + +#define S_LDT_LINKCTRL_MAXIN 16 +#define M_LDT_LINKCTRL_MAXIN _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_MAXIN) +#define V_LDT_LINKCTRL_MAXIN(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_MAXIN) +#define G_LDT_LINKCTRL_MAXIN(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_MAXIN, M_LDT_LINKCTRL_MAXIN) + +#define M_LDT_LINKCTRL_DWFCLN _SB_MAKEMASK1_32(19) + +#define S_LDT_LINKCTRL_MAXOUT 20 +#define M_LDT_LINKCTRL_MAXOUT _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_MAXOUT) +#define V_LDT_LINKCTRL_MAXOUT(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_MAXOUT) +#define G_LDT_LINKCTRL_MAXOUT(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_MAXOUT, M_LDT_LINKCTRL_MAXOUT) + +#define M_LDT_LINKCTRL_DWFCOUT _SB_MAKEMASK1_32(23) + +#define S_LDT_LINKCTRL_WIDTHIN 24 +#define M_LDT_LINKCTRL_WIDTHIN _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_WIDTHIN) +#define V_LDT_LINKCTRL_WIDTHIN(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_WIDTHIN) +#define G_LDT_LINKCTRL_WIDTHIN(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_WIDTHIN, M_LDT_LINKCTRL_WIDTHIN) + +#define M_LDT_LINKCTRL_DWFCLIN_EN _SB_MAKEMASK1_32(27) + +#define S_LDT_LINKCTRL_WIDTHOUT 28 +#define M_LDT_LINKCTRL_WIDTHOUT _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_WIDTHOUT) +#define V_LDT_LINKCTRL_WIDTHOUT(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_WIDTHOUT) +#define G_LDT_LINKCTRL_WIDTHOUT(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_WIDTHOUT, M_LDT_LINKCTRL_WIDTHOUT) + +#define M_LDT_LINKCTRL_DWFCOUT_EN _SB_MAKEMASK1_32(31) + +/* + * LDT Link frequency register (Table 8-20) offset 0x48 + */ + +#define S_LDT_LINKFREQ_FREQ 8 +#define M_LDT_LINKFREQ_FREQ _SB_MAKEMASK_32(4, S_LDT_LINKFREQ_FREQ) +#define V_LDT_LINKFREQ_FREQ(x) _SB_MAKEVALUE_32(x, S_LDT_LINKFREQ_FREQ) +#define G_LDT_LINKFREQ_FREQ(x) _SB_GETVALUE_32(x, S_LDT_LINKFREQ_FREQ, M_LDT_LINKFREQ_FREQ) + +#define K_LDT_LINKFREQ_200MHZ 0 +#define K_LDT_LINKFREQ_300MHZ 1 +#define K_LDT_LINKFREQ_400MHZ 2 +#define K_LDT_LINKFREQ_500MHZ 3 +#define K_LDT_LINKFREQ_600MHZ 4 +#define K_LDT_LINKFREQ_800MHZ 5 +#define K_LDT_LINKFREQ_1000MHZ 6 + +/* + * LDT SRI Command Register (Table 8-21). Note that these constants + * assume you've read the command and status register together + * 32-bit read at offset 0x50 + */ + +#define M_LDT_SRICMD_SIPREADY _SB_MAKEMASK1_32(16) +#define M_LDT_SRICMD_SYNCPTRCTL _SB_MAKEMASK1_32(17) +#define M_LDT_SRICMD_REDUCESYNCZERO _SB_MAKEMASK1_32(18) +#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1) +#define M_LDT_SRICMD_DISSTARVATIONCNT _SB_MAKEMASK1_32(19) /* PASS1 */ +#endif /* up to 1250 PASS1 */ +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define M_LDT_SRICMD_DISMULTTXVLD _SB_MAKEMASK1_32(19) +#define M_LDT_SRICMD_EXPENDIAN _SB_MAKEMASK1_32(26) +#endif /* 1250 PASS2 || 112x PASS1 */ + + +#define S_LDT_SRICMD_RXMARGIN 20 +#define M_LDT_SRICMD_RXMARGIN _SB_MAKEMASK_32(5, S_LDT_SRICMD_RXMARGIN) +#define V_LDT_SRICMD_RXMARGIN(x) _SB_MAKEVALUE_32(x, S_LDT_SRICMD_RXMARGIN) +#define G_LDT_SRICMD_RXMARGIN(x) _SB_GETVALUE_32(x, S_LDT_SRICMD_RXMARGIN, M_LDT_SRICMD_RXMARGIN) + +#define M_LDT_SRICMD_LDTPLLCOMPAT _SB_MAKEMASK1_32(25) + +#define S_LDT_SRICMD_TXINITIALOFFSET 28 +#define M_LDT_SRICMD_TXINITIALOFFSET _SB_MAKEMASK_32(3, S_LDT_SRICMD_TXINITIALOFFSET) +#define V_LDT_SRICMD_TXINITIALOFFSET(x) _SB_MAKEVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET) +#define G_LDT_SRICMD_TXINITIALOFFSET(x) _SB_GETVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET, M_LDT_SRICMD_TXINITIALOFFSET) + +#define M_LDT_SRICMD_LINKFREQDIRECT _SB_MAKEMASK1_32(31) + +/* + * LDT Error control and status register (Table 8-22) (Table 8-23) + */ + +#define M_LDT_ERRCTL_PROTFATAL_EN _SB_MAKEMASK1_32(0) +#define M_LDT_ERRCTL_PROTNONFATAL_EN _SB_MAKEMASK1_32(1) +#define M_LDT_ERRCTL_PROTSYNCFLOOD_EN _SB_MAKEMASK1_32(2) +#define M_LDT_ERRCTL_OVFFATAL_EN _SB_MAKEMASK1_32(3) +#define M_LDT_ERRCTL_OVFNONFATAL_EN _SB_MAKEMASK1_32(4) +#define M_LDT_ERRCTL_OVFSYNCFLOOD_EN _SB_MAKEMASK1_32(5) +#define M_LDT_ERRCTL_EOCNXAFATAL_EN _SB_MAKEMASK1_32(6) +#define M_LDT_ERRCTL_EOCNXANONFATAL_EN _SB_MAKEMASK1_32(7) +#define M_LDT_ERRCTL_EOCNXASYNCFLOOD_EN _SB_MAKEMASK1_32(8) +#define M_LDT_ERRCTL_CRCFATAL_EN _SB_MAKEMASK1_32(9) +#define M_LDT_ERRCTL_CRCNONFATAL_EN _SB_MAKEMASK1_32(10) +#define M_LDT_ERRCTL_SERRFATAL_EN _SB_MAKEMASK1_32(11) +#define M_LDT_ERRCTL_SRCTAGFATAL_EN _SB_MAKEMASK1_32(12) +#define M_LDT_ERRCTL_SRCTAGNONFATAL_EN _SB_MAKEMASK1_32(13) +#define M_LDT_ERRCTL_SRCTAGSYNCFLOOD_EN _SB_MAKEMASK1_32(14) +#define M_LDT_ERRCTL_MAPNXAFATAL_EN _SB_MAKEMASK1_32(15) +#define M_LDT_ERRCTL_MAPNXANONFATAL_EN _SB_MAKEMASK1_32(16) +#define M_LDT_ERRCTL_MAPNXASYNCFLOOD_EN _SB_MAKEMASK1_32(17) + +#define M_LDT_ERRCTL_PROTOERR _SB_MAKEMASK1_32(24) +#define M_LDT_ERRCTL_OVFERR _SB_MAKEMASK1_32(25) +#define M_LDT_ERRCTL_EOCNXAERR _SB_MAKEMASK1_32(26) +#define M_LDT_ERRCTL_SRCTAGERR _SB_MAKEMASK1_32(27) +#define M_LDT_ERRCTL_MAPNXAERR _SB_MAKEMASK1_32(28) + +/* + * SRI Control register (Table 8-24, 8-25) Offset 0x6C + */ + +#define S_LDT_SRICTRL_NEEDRESP 0 +#define M_LDT_SRICTRL_NEEDRESP _SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDRESP) +#define V_LDT_SRICTRL_NEEDRESP(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDRESP) +#define G_LDT_SRICTRL_NEEDRESP(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDRESP, M_LDT_SRICTRL_NEEDRESP) + +#define S_LDT_SRICTRL_NEEDNPREQ 2 +#define M_LDT_SRICTRL_NEEDNPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDNPREQ) +#define V_LDT_SRICTRL_NEEDNPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDNPREQ) +#define G_LDT_SRICTRL_NEEDNPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDNPREQ, M_LDT_SRICTRL_NEEDNPREQ) + +#define S_LDT_SRICTRL_NEEDPREQ 4 +#define M_LDT_SRICTRL_NEEDPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDPREQ) +#define V_LDT_SRICTRL_NEEDPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDPREQ) +#define G_LDT_SRICTRL_NEEDPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDPREQ, M_LDT_SRICTRL_NEEDPREQ) + +#define S_LDT_SRICTRL_WANTRESP 8 +#define M_LDT_SRICTRL_WANTRESP _SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTRESP) +#define V_LDT_SRICTRL_WANTRESP(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTRESP) +#define G_LDT_SRICTRL_WANTRESP(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTRESP, M_LDT_SRICTRL_WANTRESP) + +#define S_LDT_SRICTRL_WANTNPREQ 10 +#define M_LDT_SRICTRL_WANTNPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTNPREQ) +#define V_LDT_SRICTRL_WANTNPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTNPREQ) +#define G_LDT_SRICTRL_WANTNPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTNPREQ, M_LDT_SRICTRL_WANTNPREQ) + +#define S_LDT_SRICTRL_WANTPREQ 12 +#define M_LDT_SRICTRL_WANTPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTPREQ) +#define V_LDT_SRICTRL_WANTPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTPREQ) +#define G_LDT_SRICTRL_WANTPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTPREQ, M_LDT_SRICTRL_WANTPREQ) + +#define S_LDT_SRICTRL_BUFRELSPACE 16 +#define M_LDT_SRICTRL_BUFRELSPACE _SB_MAKEMASK_32(4, S_LDT_SRICTRL_BUFRELSPACE) +#define V_LDT_SRICTRL_BUFRELSPACE(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_BUFRELSPACE) +#define G_LDT_SRICTRL_BUFRELSPACE(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_BUFRELSPACE, M_LDT_SRICTRL_BUFRELSPACE) + +/* + * LDT SRI Transmit Buffer Count register (Table 8-26) + */ + +#define S_LDT_TXBUFCNT_PCMD 0 +#define M_LDT_TXBUFCNT_PCMD _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_PCMD) +#define V_LDT_TXBUFCNT_PCMD(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_PCMD) +#define G_LDT_TXBUFCNT_PCMD(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_PCMD, M_LDT_TXBUFCNT_PCMD) + +#define S_LDT_TXBUFCNT_PDATA 4 +#define M_LDT_TXBUFCNT_PDATA _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_PDATA) +#define V_LDT_TXBUFCNT_PDATA(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_PDATA) +#define G_LDT_TXBUFCNT_PDATA(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_PDATA, M_LDT_TXBUFCNT_PDATA) + +#define S_LDT_TXBUFCNT_NPCMD 8 +#define M_LDT_TXBUFCNT_NPCMD _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_NPCMD) +#define V_LDT_TXBUFCNT_NPCMD(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_NPCMD) +#define G_LDT_TXBUFCNT_NPCMD(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_NPCMD, M_LDT_TXBUFCNT_NPCMD) + +#define S_LDT_TXBUFCNT_NPDATA 12 +#define M_LDT_TXBUFCNT_NPDATA _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_NPDATA) +#define V_LDT_TXBUFCNT_NPDATA(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_NPDATA) +#define G_LDT_TXBUFCNT_NPDATA(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_NPDATA, M_LDT_TXBUFCNT_NPDATA) + +#define S_LDT_TXBUFCNT_RCMD 16 +#define M_LDT_TXBUFCNT_RCMD _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_RCMD) +#define V_LDT_TXBUFCNT_RCMD(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_RCMD) +#define G_LDT_TXBUFCNT_RCMD(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_RCMD, M_LDT_TXBUFCNT_RCMD) + +#define S_LDT_TXBUFCNT_RDATA 20 +#define M_LDT_TXBUFCNT_RDATA _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_RDATA) +#define V_LDT_TXBUFCNT_RDATA(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_RDATA) +#define G_LDT_TXBUFCNT_RDATA(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_RDATA, M_LDT_TXBUFCNT_RDATA) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +/* + * Additional Status Register + */ + +#define S_LDT_ADDSTATUS_TGTDONE 0 +#define M_LDT_ADDSTATUS_TGTDONE _SB_MAKEMASK_32(8, S_LDT_ADDSTATUS_TGTDONE) +#define V_LDT_ADDSTATUS_TGTDONE(x) _SB_MAKEVALUE_32(x, S_LDT_ADDSTATUS_TGTDONE) +#define G_LDT_ADDSTATUS_TGTDONE(x) _SB_GETVALUE_32(x, S_LDT_ADDSTATUS_TGTDONE, M_LDT_ADDSTATUS_TGTDONE) +#endif /* 1250 PASS2 || 112x PASS1 */ + +#endif + diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h new file mode 100644 index 000000000000..b6faf08ca81d --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_mac.h @@ -0,0 +1,656 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * MAC constants and macros File: sb1250_mac.h + * + * This module contains constants and macros for the SB1250's + * ethernet controllers. + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_MAC_H +#define _SB1250_MAC_H + +#include "sb1250_defs.h" + +/* ********************************************************************* + * Ethernet MAC Registers + ********************************************************************* */ + +/* + * MAC Configuration Register (Table 9-13) + * Register: MAC_CFG_0 + * Register: MAC_CFG_1 + * Register: MAC_CFG_2 + */ + + +#define M_MAC_RESERVED0 _SB_MAKEMASK1(0) +#define M_MAC_TX_HOLD_SOP_EN _SB_MAKEMASK1(1) +#define M_MAC_RETRY_EN _SB_MAKEMASK1(2) +#define M_MAC_RET_DRPREQ_EN _SB_MAKEMASK1(3) +#define M_MAC_RET_UFL_EN _SB_MAKEMASK1(4) +#define M_MAC_BURST_EN _SB_MAKEMASK1(5) + +#define S_MAC_TX_PAUSE _SB_MAKE64(6) +#define M_MAC_TX_PAUSE_CNT _SB_MAKEMASK(3, S_MAC_TX_PAUSE) +#define V_MAC_TX_PAUSE_CNT(x) _SB_MAKEVALUE(x, S_MAC_TX_PAUSE) + +#define K_MAC_TX_PAUSE_CNT_512 0 +#define K_MAC_TX_PAUSE_CNT_1K 1 +#define K_MAC_TX_PAUSE_CNT_2K 2 +#define K_MAC_TX_PAUSE_CNT_4K 3 +#define K_MAC_TX_PAUSE_CNT_8K 4 +#define K_MAC_TX_PAUSE_CNT_16K 5 +#define K_MAC_TX_PAUSE_CNT_32K 6 +#define K_MAC_TX_PAUSE_CNT_64K 7 + +#define V_MAC_TX_PAUSE_CNT_512 V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_512) +#define V_MAC_TX_PAUSE_CNT_1K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_1K) +#define V_MAC_TX_PAUSE_CNT_2K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_2K) +#define V_MAC_TX_PAUSE_CNT_4K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_4K) +#define V_MAC_TX_PAUSE_CNT_8K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_8K) +#define V_MAC_TX_PAUSE_CNT_16K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_16K) +#define V_MAC_TX_PAUSE_CNT_32K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_32K) +#define V_MAC_TX_PAUSE_CNT_64K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_64K) + +#define M_MAC_RESERVED1 _SB_MAKEMASK(8, 9) + +#define M_MAC_AP_STAT_EN _SB_MAKEMASK1(17) + +#if SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_TIMESTAMP _SB_MAKEMASK1(18) +#endif +#define M_MAC_DRP_ERRPKT_EN _SB_MAKEMASK1(19) +#define M_MAC_DRP_FCSERRPKT_EN _SB_MAKEMASK1(20) +#define M_MAC_DRP_CODEERRPKT_EN _SB_MAKEMASK1(21) +#define M_MAC_DRP_DRBLERRPKT_EN _SB_MAKEMASK1(22) +#define M_MAC_DRP_RNTPKT_EN _SB_MAKEMASK1(23) +#define M_MAC_DRP_OSZPKT_EN _SB_MAKEMASK1(24) +#define M_MAC_DRP_LENERRPKT_EN _SB_MAKEMASK1(25) + +#define M_MAC_RESERVED3 _SB_MAKEMASK(6, 26) + +#define M_MAC_BYPASS_SEL _SB_MAKEMASK1(32) +#define M_MAC_HDX_EN _SB_MAKEMASK1(33) + +#define S_MAC_SPEED_SEL _SB_MAKE64(34) +#define M_MAC_SPEED_SEL _SB_MAKEMASK(2, S_MAC_SPEED_SEL) +#define V_MAC_SPEED_SEL(x) _SB_MAKEVALUE(x, S_MAC_SPEED_SEL) +#define G_MAC_SPEED_SEL(x) _SB_GETVALUE(x, S_MAC_SPEED_SEL, M_MAC_SPEED_SEL) + +#define K_MAC_SPEED_SEL_10MBPS 0 +#define K_MAC_SPEED_SEL_100MBPS 1 +#define K_MAC_SPEED_SEL_1000MBPS 2 +#define K_MAC_SPEED_SEL_RESERVED 3 + +#define V_MAC_SPEED_SEL_10MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_10MBPS) +#define V_MAC_SPEED_SEL_100MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_100MBPS) +#define V_MAC_SPEED_SEL_1000MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_1000MBPS) +#define V_MAC_SPEED_SEL_RESERVED V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_RESERVED) + +#define M_MAC_TX_CLK_EDGE_SEL _SB_MAKEMASK1(36) +#define M_MAC_LOOPBACK_SEL _SB_MAKEMASK1(37) +#define M_MAC_FAST_SYNC _SB_MAKEMASK1(38) +#define M_MAC_SS_EN _SB_MAKEMASK1(39) + +#define S_MAC_BYPASS_CFG _SB_MAKE64(40) +#define M_MAC_BYPASS_CFG _SB_MAKEMASK(2, S_MAC_BYPASS_CFG) +#define V_MAC_BYPASS_CFG(x) _SB_MAKEVALUE(x, S_MAC_BYPASS_CFG) +#define G_MAC_BYPASS_CFG(x) _SB_GETVALUE(x, S_MAC_BYPASS_CFG, M_MAC_BYPASS_CFG) + +#define K_MAC_BYPASS_GMII 0 +#define K_MAC_BYPASS_ENCODED 1 +#define K_MAC_BYPASS_SOP 2 +#define K_MAC_BYPASS_EOP 3 + +#define M_MAC_BYPASS_16 _SB_MAKEMASK1(42) +#define M_MAC_BYPASS_FCS_CHK _SB_MAKEMASK1(43) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_RX_CH_SEL_MSB _SB_MAKEMASK1(44) +#endif /* 1250 PASS2 || 112x PASS1 || 1480*/ + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_SPLIT_CH_SEL _SB_MAKEMASK1(45) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define S_MAC_BYPASS_IFG _SB_MAKE64(46) +#define M_MAC_BYPASS_IFG _SB_MAKEMASK(8, S_MAC_BYPASS_IFG) +#define V_MAC_BYPASS_IFG(x) _SB_MAKEVALUE(x, S_MAC_BYPASS_IFG) +#define G_MAC_BYPASS_IFG(x) _SB_GETVALUE(x, S_MAC_BYPASS_IFG, M_MAC_BYPASS_IFG) + +#define K_MAC_FC_CMD_DISABLED 0 +#define K_MAC_FC_CMD_ENABLED 1 +#define K_MAC_FC_CMD_ENAB_FALSECARR 2 + +#define V_MAC_FC_CMD_DISABLED V_MAC_FC_CMD(K_MAC_FC_CMD_DISABLED) +#define V_MAC_FC_CMD_ENABLED V_MAC_FC_CMD(K_MAC_FC_CMD_ENABLED) +#define V_MAC_FC_CMD_ENAB_FALSECARR V_MAC_FC_CMD(K_MAC_FC_CMD_ENAB_FALSECARR) + +#define M_MAC_FC_SEL _SB_MAKEMASK1(54) + +#define S_MAC_FC_CMD _SB_MAKE64(55) +#define M_MAC_FC_CMD _SB_MAKEMASK(2, S_MAC_FC_CMD) +#define V_MAC_FC_CMD(x) _SB_MAKEVALUE(x, S_MAC_FC_CMD) +#define G_MAC_FC_CMD(x) _SB_GETVALUE(x, S_MAC_FC_CMD, M_MAC_FC_CMD) + +#define S_MAC_RX_CH_SEL _SB_MAKE64(57) +#define M_MAC_RX_CH_SEL _SB_MAKEMASK(7, S_MAC_RX_CH_SEL) +#define V_MAC_RX_CH_SEL(x) _SB_MAKEVALUE(x, S_MAC_RX_CH_SEL) +#define G_MAC_RX_CH_SEL(x) _SB_GETVALUE(x, S_MAC_RX_CH_SEL, M_MAC_RX_CH_SEL) + + +/* + * MAC Enable Registers + * Register: MAC_ENABLE_0 + * Register: MAC_ENABLE_1 + * Register: MAC_ENABLE_2 + */ + +#define M_MAC_RXDMA_EN0 _SB_MAKEMASK1(0) +#define M_MAC_RXDMA_EN1 _SB_MAKEMASK1(1) +#define M_MAC_TXDMA_EN0 _SB_MAKEMASK1(4) +#define M_MAC_TXDMA_EN1 _SB_MAKEMASK1(5) + +#define M_MAC_PORT_RESET _SB_MAKEMASK1(8) + +#if (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x)) +#define M_MAC_RX_ENABLE _SB_MAKEMASK1(10) +#define M_MAC_TX_ENABLE _SB_MAKEMASK1(11) +#define M_MAC_BYP_RX_ENABLE _SB_MAKEMASK1(12) +#define M_MAC_BYP_TX_ENABLE _SB_MAKEMASK1(13) +#endif + +/* + * MAC reset information register (1280/1255) + */ +#if SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_RX_CH0_PAUSE_ON _SB_MAKEMASK1(8) +#define M_MAC_RX_CH1_PAUSE_ON _SB_MAKEMASK1(16) +#define M_MAC_TX_CH0_PAUSE_ON _SB_MAKEMASK1(24) +#define M_MAC_TX_CH1_PAUSE_ON _SB_MAKEMASK1(32) +#endif + +/* + * MAC DMA Control Register + * Register: MAC_TXD_CTL_0 + * Register: MAC_TXD_CTL_1 + * Register: MAC_TXD_CTL_2 + */ + +#define S_MAC_TXD_WEIGHT0 _SB_MAKE64(0) +#define M_MAC_TXD_WEIGHT0 _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT0) +#define V_MAC_TXD_WEIGHT0(x) _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT0) +#define G_MAC_TXD_WEIGHT0(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT0, M_MAC_TXD_WEIGHT0) + +#define S_MAC_TXD_WEIGHT1 _SB_MAKE64(4) +#define M_MAC_TXD_WEIGHT1 _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT1) +#define V_MAC_TXD_WEIGHT1(x) _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT1) +#define G_MAC_TXD_WEIGHT1(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1) + +/* + * MAC Fifo Threshhold registers (Table 9-14) + * Register: MAC_THRSH_CFG_0 + * Register: MAC_THRSH_CFG_1 + * Register: MAC_THRSH_CFG_2 + */ + +#define S_MAC_TX_WR_THRSH _SB_MAKE64(0) +#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1) +/* XXX: Can't enable, as it has the same name as a pass2+ define below. */ +/* #define M_MAC_TX_WR_THRSH _SB_MAKEMASK(6, S_MAC_TX_WR_THRSH) */ +#endif /* up to 1250 PASS1 */ +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_TX_WR_THRSH _SB_MAKEMASK(7, S_MAC_TX_WR_THRSH) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ +#define V_MAC_TX_WR_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_WR_THRSH) +#define G_MAC_TX_WR_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_WR_THRSH, M_MAC_TX_WR_THRSH) + +#define S_MAC_TX_RD_THRSH _SB_MAKE64(8) +#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1) +/* XXX: Can't enable, as it has the same name as a pass2+ define below. */ +/* #define M_MAC_TX_RD_THRSH _SB_MAKEMASK(6, S_MAC_TX_RD_THRSH) */ +#endif /* up to 1250 PASS1 */ +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_TX_RD_THRSH _SB_MAKEMASK(7, S_MAC_TX_RD_THRSH) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ +#define V_MAC_TX_RD_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_RD_THRSH) +#define G_MAC_TX_RD_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_RD_THRSH, M_MAC_TX_RD_THRSH) + +#define S_MAC_TX_RL_THRSH _SB_MAKE64(16) +#define M_MAC_TX_RL_THRSH _SB_MAKEMASK(4, S_MAC_TX_RL_THRSH) +#define V_MAC_TX_RL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_RL_THRSH) +#define G_MAC_TX_RL_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_RL_THRSH, M_MAC_TX_RL_THRSH) + +#define S_MAC_RX_PL_THRSH _SB_MAKE64(24) +#define M_MAC_RX_PL_THRSH _SB_MAKEMASK(6, S_MAC_RX_PL_THRSH) +#define V_MAC_RX_PL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_PL_THRSH) +#define G_MAC_RX_PL_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_PL_THRSH, M_MAC_RX_PL_THRSH) + +#define S_MAC_RX_RD_THRSH _SB_MAKE64(32) +#define M_MAC_RX_RD_THRSH _SB_MAKEMASK(6, S_MAC_RX_RD_THRSH) +#define V_MAC_RX_RD_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_RD_THRSH) +#define G_MAC_RX_RD_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_RD_THRSH, M_MAC_RX_RD_THRSH) + +#define S_MAC_RX_RL_THRSH _SB_MAKE64(40) +#define M_MAC_RX_RL_THRSH _SB_MAKEMASK(6, S_MAC_RX_RL_THRSH) +#define V_MAC_RX_RL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_RL_THRSH) +#define G_MAC_RX_RL_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_RL_THRSH, M_MAC_RX_RL_THRSH) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_MAC_ENC_FC_THRSH _SB_MAKE64(56) +#define M_MAC_ENC_FC_THRSH _SB_MAKEMASK(6, S_MAC_ENC_FC_THRSH) +#define V_MAC_ENC_FC_THRSH(x) _SB_MAKEVALUE(x, S_MAC_ENC_FC_THRSH) +#define G_MAC_ENC_FC_THRSH(x) _SB_GETVALUE(x, S_MAC_ENC_FC_THRSH, M_MAC_ENC_FC_THRSH) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +/* + * MAC Frame Configuration Registers (Table 9-15) + * Register: MAC_FRAME_CFG_0 + * Register: MAC_FRAME_CFG_1 + * Register: MAC_FRAME_CFG_2 + */ + +/* XXXCGD: ??? Unused in pass2? */ +#define S_MAC_IFG_RX _SB_MAKE64(0) +#define M_MAC_IFG_RX _SB_MAKEMASK(6, S_MAC_IFG_RX) +#define V_MAC_IFG_RX(x) _SB_MAKEVALUE(x, S_MAC_IFG_RX) +#define G_MAC_IFG_RX(x) _SB_GETVALUE(x, S_MAC_IFG_RX, M_MAC_IFG_RX) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_MAC_PRE_LEN _SB_MAKE64(0) +#define M_MAC_PRE_LEN _SB_MAKEMASK(6, S_MAC_PRE_LEN) +#define V_MAC_PRE_LEN(x) _SB_MAKEVALUE(x, S_MAC_PRE_LEN) +#define G_MAC_PRE_LEN(x) _SB_GETVALUE(x, S_MAC_PRE_LEN, M_MAC_PRE_LEN) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define S_MAC_IFG_TX _SB_MAKE64(6) +#define M_MAC_IFG_TX _SB_MAKEMASK(6, S_MAC_IFG_TX) +#define V_MAC_IFG_TX(x) _SB_MAKEVALUE(x, S_MAC_IFG_TX) +#define G_MAC_IFG_TX(x) _SB_GETVALUE(x, S_MAC_IFG_TX, M_MAC_IFG_TX) + +#define S_MAC_IFG_THRSH _SB_MAKE64(12) +#define M_MAC_IFG_THRSH _SB_MAKEMASK(6, S_MAC_IFG_THRSH) +#define V_MAC_IFG_THRSH(x) _SB_MAKEVALUE(x, S_MAC_IFG_THRSH) +#define G_MAC_IFG_THRSH(x) _SB_GETVALUE(x, S_MAC_IFG_THRSH, M_MAC_IFG_THRSH) + +#define S_MAC_BACKOFF_SEL _SB_MAKE64(18) +#define M_MAC_BACKOFF_SEL _SB_MAKEMASK(4, S_MAC_BACKOFF_SEL) +#define V_MAC_BACKOFF_SEL(x) _SB_MAKEVALUE(x, S_MAC_BACKOFF_SEL) +#define G_MAC_BACKOFF_SEL(x) _SB_GETVALUE(x, S_MAC_BACKOFF_SEL, M_MAC_BACKOFF_SEL) + +#define S_MAC_LFSR_SEED _SB_MAKE64(22) +#define M_MAC_LFSR_SEED _SB_MAKEMASK(8, S_MAC_LFSR_SEED) +#define V_MAC_LFSR_SEED(x) _SB_MAKEVALUE(x, S_MAC_LFSR_SEED) +#define G_MAC_LFSR_SEED(x) _SB_GETVALUE(x, S_MAC_LFSR_SEED, M_MAC_LFSR_SEED) + +#define S_MAC_SLOT_SIZE _SB_MAKE64(30) +#define M_MAC_SLOT_SIZE _SB_MAKEMASK(10, S_MAC_SLOT_SIZE) +#define V_MAC_SLOT_SIZE(x) _SB_MAKEVALUE(x, S_MAC_SLOT_SIZE) +#define G_MAC_SLOT_SIZE(x) _SB_GETVALUE(x, S_MAC_SLOT_SIZE, M_MAC_SLOT_SIZE) + +#define S_MAC_MIN_FRAMESZ _SB_MAKE64(40) +#define M_MAC_MIN_FRAMESZ _SB_MAKEMASK(8, S_MAC_MIN_FRAMESZ) +#define V_MAC_MIN_FRAMESZ(x) _SB_MAKEVALUE(x, S_MAC_MIN_FRAMESZ) +#define G_MAC_MIN_FRAMESZ(x) _SB_GETVALUE(x, S_MAC_MIN_FRAMESZ, M_MAC_MIN_FRAMESZ) + +#define S_MAC_MAX_FRAMESZ _SB_MAKE64(48) +#define M_MAC_MAX_FRAMESZ _SB_MAKEMASK(16, S_MAC_MAX_FRAMESZ) +#define V_MAC_MAX_FRAMESZ(x) _SB_MAKEVALUE(x, S_MAC_MAX_FRAMESZ) +#define G_MAC_MAX_FRAMESZ(x) _SB_GETVALUE(x, S_MAC_MAX_FRAMESZ, M_MAC_MAX_FRAMESZ) + +/* + * These constants are used to configure the fields within the Frame + * Configuration Register. + */ + +#define K_MAC_IFG_RX_10 _SB_MAKE64(0) /* See table 176, not used */ +#define K_MAC_IFG_RX_100 _SB_MAKE64(0) +#define K_MAC_IFG_RX_1000 _SB_MAKE64(0) + +#define K_MAC_IFG_TX_10 _SB_MAKE64(20) +#define K_MAC_IFG_TX_100 _SB_MAKE64(20) +#define K_MAC_IFG_TX_1000 _SB_MAKE64(8) + +#define K_MAC_IFG_THRSH_10 _SB_MAKE64(4) +#define K_MAC_IFG_THRSH_100 _SB_MAKE64(4) +#define K_MAC_IFG_THRSH_1000 _SB_MAKE64(0) + +#define K_MAC_SLOT_SIZE_10 _SB_MAKE64(0) +#define K_MAC_SLOT_SIZE_100 _SB_MAKE64(0) +#define K_MAC_SLOT_SIZE_1000 _SB_MAKE64(0) + +#define V_MAC_IFG_RX_10 V_MAC_IFG_RX(K_MAC_IFG_RX_10) +#define V_MAC_IFG_RX_100 V_MAC_IFG_RX(K_MAC_IFG_RX_100) +#define V_MAC_IFG_RX_1000 V_MAC_IFG_RX(K_MAC_IFG_RX_1000) + +#define V_MAC_IFG_TX_10 V_MAC_IFG_TX(K_MAC_IFG_TX_10) +#define V_MAC_IFG_TX_100 V_MAC_IFG_TX(K_MAC_IFG_TX_100) +#define V_MAC_IFG_TX_1000 V_MAC_IFG_TX(K_MAC_IFG_TX_1000) + +#define V_MAC_IFG_THRSH_10 V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_10) +#define V_MAC_IFG_THRSH_100 V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_100) +#define V_MAC_IFG_THRSH_1000 V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_1000) + +#define V_MAC_SLOT_SIZE_10 V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_10) +#define V_MAC_SLOT_SIZE_100 V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_100) +#define V_MAC_SLOT_SIZE_1000 V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_1000) + +#define K_MAC_MIN_FRAMESZ_FIFO _SB_MAKE64(9) +#define K_MAC_MIN_FRAMESZ_DEFAULT _SB_MAKE64(64) +#define K_MAC_MAX_FRAMESZ_DEFAULT _SB_MAKE64(1518) +#define K_MAC_MAX_FRAMESZ_JUMBO _SB_MAKE64(9216) + +#define V_MAC_MIN_FRAMESZ_FIFO V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_FIFO) +#define V_MAC_MIN_FRAMESZ_DEFAULT V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_DEFAULT) +#define V_MAC_MAX_FRAMESZ_DEFAULT V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_DEFAULT) +#define V_MAC_MAX_FRAMESZ_JUMBO V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_JUMBO) + +/* + * MAC VLAN Tag Registers (Table 9-16) + * Register: MAC_VLANTAG_0 + * Register: MAC_VLANTAG_1 + * Register: MAC_VLANTAG_2 + */ + +#define S_MAC_VLAN_TAG _SB_MAKE64(0) +#define M_MAC_VLAN_TAG _SB_MAKEMASK(32, S_MAC_VLAN_TAG) +#define V_MAC_VLAN_TAG(x) _SB_MAKEVALUE(x, S_MAC_VLAN_TAG) +#define G_MAC_VLAN_TAG(x) _SB_GETVALUE(x, S_MAC_VLAN_TAG, M_MAC_VLAN_TAG) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define S_MAC_TX_PKT_OFFSET _SB_MAKE64(32) +#define M_MAC_TX_PKT_OFFSET _SB_MAKEMASK(8, S_MAC_TX_PKT_OFFSET) +#define V_MAC_TX_PKT_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_TX_PKT_OFFSET) +#define G_MAC_TX_PKT_OFFSET(x) _SB_GETVALUE(x, S_MAC_TX_PKT_OFFSET, M_MAC_TX_PKT_OFFSET) + +#define S_MAC_TX_CRC_OFFSET _SB_MAKE64(40) +#define M_MAC_TX_CRC_OFFSET _SB_MAKEMASK(8, S_MAC_TX_CRC_OFFSET) +#define V_MAC_TX_CRC_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_TX_CRC_OFFSET) +#define G_MAC_TX_CRC_OFFSET(x) _SB_GETVALUE(x, S_MAC_TX_CRC_OFFSET, M_MAC_TX_CRC_OFFSET) + +#define M_MAC_CH_BASE_FC_EN _SB_MAKEMASK1(48) +#endif /* 1250 PASS3 || 112x PASS1 */ + +/* + * MAC Status Registers (Table 9-17) + * Also used for the MAC Interrupt Mask Register (Table 9-18) + * Register: MAC_STATUS_0 + * Register: MAC_STATUS_1 + * Register: MAC_STATUS_2 + * Register: MAC_INT_MASK_0 + * Register: MAC_INT_MASK_1 + * Register: MAC_INT_MASK_2 + */ + +/* + * Use these constants to shift the appropriate channel + * into the CH0 position so the same tests can be used + * on each channel. + */ + +#define S_MAC_RX_CH0 _SB_MAKE64(0) +#define S_MAC_RX_CH1 _SB_MAKE64(8) +#define S_MAC_TX_CH0 _SB_MAKE64(16) +#define S_MAC_TX_CH1 _SB_MAKE64(24) + +#define S_MAC_TXCHANNELS _SB_MAKE64(16) /* this is 1st TX chan */ +#define S_MAC_CHANWIDTH _SB_MAKE64(8) /* bits between channels */ + +/* + * These are the same as RX channel 0. The idea here + * is that you'll use one of the "S_" things above + * and pass just the six bits to a DMA-channel-specific ISR + */ +#define M_MAC_INT_CHANNEL _SB_MAKEMASK(8, 0) +#define M_MAC_INT_EOP_COUNT _SB_MAKEMASK1(0) +#define M_MAC_INT_EOP_TIMER _SB_MAKEMASK1(1) +#define M_MAC_INT_EOP_SEEN _SB_MAKEMASK1(2) +#define M_MAC_INT_HWM _SB_MAKEMASK1(3) +#define M_MAC_INT_LWM _SB_MAKEMASK1(4) +#define M_MAC_INT_DSCR _SB_MAKEMASK1(5) +#define M_MAC_INT_ERR _SB_MAKEMASK1(6) +#define M_MAC_INT_DZERO _SB_MAKEMASK1(7) /* only for TX channels */ +#define M_MAC_INT_DROP _SB_MAKEMASK1(7) /* only for RX channels */ + +/* + * In the following definitions we use ch (0/1) and txrx (TX=1, RX=0, see + * also DMA_TX/DMA_RX in sb_regs.h). + */ +#define S_MAC_STATUS_CH_OFFSET(ch, txrx) _SB_MAKE64(((ch) + 2 * (txrx)) * S_MAC_CHANWIDTH) + +#define M_MAC_STATUS_CHANNEL(ch, txrx) _SB_MAKEVALUE(_SB_MAKEMASK(8, 0), S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_EOP_COUNT(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_COUNT, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_EOP_TIMER(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_TIMER, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_EOP_SEEN(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_SEEN, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_HWM(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_HWM, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_LWM(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_LWM, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_DSCR(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DSCR, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_ERR(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_ERR, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_DZERO(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DZERO, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_DROP(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DROP, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_OTHER_ERR _SB_MAKEVALUE(_SB_MAKEMASK(7, 0), 40) + + +#define M_MAC_RX_UNDRFL _SB_MAKEMASK1(40) +#define M_MAC_RX_OVRFL _SB_MAKEMASK1(41) +#define M_MAC_TX_UNDRFL _SB_MAKEMASK1(42) +#define M_MAC_TX_OVRFL _SB_MAKEMASK1(43) +#define M_MAC_LTCOL_ERR _SB_MAKEMASK1(44) +#define M_MAC_EXCOL_ERR _SB_MAKEMASK1(45) +#define M_MAC_CNTR_OVRFL_ERR _SB_MAKEMASK1(46) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_SPLIT_EN _SB_MAKEMASK1(47) /* interrupt mask only */ +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#define S_MAC_COUNTER_ADDR _SB_MAKE64(47) +#define M_MAC_COUNTER_ADDR _SB_MAKEMASK(5, S_MAC_COUNTER_ADDR) +#define V_MAC_COUNTER_ADDR(x) _SB_MAKEVALUE(x, S_MAC_COUNTER_ADDR) +#define G_MAC_COUNTER_ADDR(x) _SB_GETVALUE(x, S_MAC_COUNTER_ADDR, M_MAC_COUNTER_ADDR) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_TX_PAUSE_ON _SB_MAKEMASK1(52) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +/* + * MAC Fifo Pointer Registers (Table 9-19) [Debug register] + * Register: MAC_FIFO_PTRS_0 + * Register: MAC_FIFO_PTRS_1 + * Register: MAC_FIFO_PTRS_2 + */ + +#define S_MAC_TX_WRPTR _SB_MAKE64(0) +#define M_MAC_TX_WRPTR _SB_MAKEMASK(6, S_MAC_TX_WRPTR) +#define V_MAC_TX_WRPTR(x) _SB_MAKEVALUE(x, S_MAC_TX_WRPTR) +#define G_MAC_TX_WRPTR(x) _SB_GETVALUE(x, S_MAC_TX_WRPTR, M_MAC_TX_WRPTR) + +#define S_MAC_TX_RDPTR _SB_MAKE64(8) +#define M_MAC_TX_RDPTR _SB_MAKEMASK(6, S_MAC_TX_RDPTR) +#define V_MAC_TX_RDPTR(x) _SB_MAKEVALUE(x, S_MAC_TX_RDPTR) +#define G_MAC_TX_RDPTR(x) _SB_GETVALUE(x, S_MAC_TX_RDPTR, M_MAC_TX_RDPTR) + +#define S_MAC_RX_WRPTR _SB_MAKE64(16) +#define M_MAC_RX_WRPTR _SB_MAKEMASK(6, S_MAC_RX_WRPTR) +#define V_MAC_RX_WRPTR(x) _SB_MAKEVALUE(x, S_MAC_RX_WRPTR) +#define G_MAC_RX_WRPTR(x) _SB_GETVALUE(x, S_MAC_RX_WRPTR, M_MAC_TX_WRPTR) + +#define S_MAC_RX_RDPTR _SB_MAKE64(24) +#define M_MAC_RX_RDPTR _SB_MAKEMASK(6, S_MAC_RX_RDPTR) +#define V_MAC_RX_RDPTR(x) _SB_MAKEVALUE(x, S_MAC_RX_RDPTR) +#define G_MAC_RX_RDPTR(x) _SB_GETVALUE(x, S_MAC_RX_RDPTR, M_MAC_TX_RDPTR) + +/* + * MAC Fifo End Of Packet Count Registers (Table 9-20) [Debug register] + * Register: MAC_EOPCNT_0 + * Register: MAC_EOPCNT_1 + * Register: MAC_EOPCNT_2 + */ + +#define S_MAC_TX_EOP_COUNTER _SB_MAKE64(0) +#define M_MAC_TX_EOP_COUNTER _SB_MAKEMASK(6, S_MAC_TX_EOP_COUNTER) +#define V_MAC_TX_EOP_COUNTER(x) _SB_MAKEVALUE(x, S_MAC_TX_EOP_COUNTER) +#define G_MAC_TX_EOP_COUNTER(x) _SB_GETVALUE(x, S_MAC_TX_EOP_COUNTER, M_MAC_TX_EOP_COUNTER) + +#define S_MAC_RX_EOP_COUNTER _SB_MAKE64(8) +#define M_MAC_RX_EOP_COUNTER _SB_MAKEMASK(6, S_MAC_RX_EOP_COUNTER) +#define V_MAC_RX_EOP_COUNTER(x) _SB_MAKEVALUE(x, S_MAC_RX_EOP_COUNTER) +#define G_MAC_RX_EOP_COUNTER(x) _SB_GETVALUE(x, S_MAC_RX_EOP_COUNTER, M_MAC_RX_EOP_COUNTER) + +/* + * MAC Recieve Address Filter Exact Match Registers (Table 9-21) + * Registers: MAC_ADDR0_0 through MAC_ADDR7_0 + * Registers: MAC_ADDR0_1 through MAC_ADDR7_1 + * Registers: MAC_ADDR0_2 through MAC_ADDR7_2 + */ + +/* No bitfields */ + +/* + * MAC Receive Address Filter Mask Registers + * Registers: MAC_ADDRMASK0_0 and MAC_ADDRMASK0_1 + * Registers: MAC_ADDRMASK1_0 and MAC_ADDRMASK1_1 + * Registers: MAC_ADDRMASK2_0 and MAC_ADDRMASK2_1 + */ + +/* No bitfields */ + +/* + * MAC Recieve Address Filter Hash Match Registers (Table 9-22) + * Registers: MAC_HASH0_0 through MAC_HASH7_0 + * Registers: MAC_HASH0_1 through MAC_HASH7_1 + * Registers: MAC_HASH0_2 through MAC_HASH7_2 + */ + +/* No bitfields */ + +/* + * MAC Transmit Source Address Registers (Table 9-23) + * Register: MAC_ETHERNET_ADDR_0 + * Register: MAC_ETHERNET_ADDR_1 + * Register: MAC_ETHERNET_ADDR_2 + */ + +/* No bitfields */ + +/* + * MAC Packet Type Configuration Register + * Register: MAC_TYPE_CFG_0 + * Register: MAC_TYPE_CFG_1 + * Register: MAC_TYPE_CFG_2 + */ + +#define S_TYPECFG_TYPESIZE _SB_MAKE64(16) + +#define S_TYPECFG_TYPE0 _SB_MAKE64(0) +#define M_TYPECFG_TYPE0 _SB_MAKEMASK(16, S_TYPECFG_TYPE0) +#define V_TYPECFG_TYPE0(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE0) +#define G_TYPECFG_TYPE0(x) _SB_GETVALUE(x, S_TYPECFG_TYPE0, M_TYPECFG_TYPE0) + +#define S_TYPECFG_TYPE1 _SB_MAKE64(0) +#define M_TYPECFG_TYPE1 _SB_MAKEMASK(16, S_TYPECFG_TYPE1) +#define V_TYPECFG_TYPE1(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE1) +#define G_TYPECFG_TYPE1(x) _SB_GETVALUE(x, S_TYPECFG_TYPE1, M_TYPECFG_TYPE1) + +#define S_TYPECFG_TYPE2 _SB_MAKE64(0) +#define M_TYPECFG_TYPE2 _SB_MAKEMASK(16, S_TYPECFG_TYPE2) +#define V_TYPECFG_TYPE2(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE2) +#define G_TYPECFG_TYPE2(x) _SB_GETVALUE(x, S_TYPECFG_TYPE2, M_TYPECFG_TYPE2) + +#define S_TYPECFG_TYPE3 _SB_MAKE64(0) +#define M_TYPECFG_TYPE3 _SB_MAKEMASK(16, S_TYPECFG_TYPE3) +#define V_TYPECFG_TYPE3(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE3) +#define G_TYPECFG_TYPE3(x) _SB_GETVALUE(x, S_TYPECFG_TYPE3, M_TYPECFG_TYPE3) + +/* + * MAC Receive Address Filter Control Registers (Table 9-24) + * Register: MAC_ADFILTER_CFG_0 + * Register: MAC_ADFILTER_CFG_1 + * Register: MAC_ADFILTER_CFG_2 + */ + +#define M_MAC_ALLPKT_EN _SB_MAKEMASK1(0) +#define M_MAC_UCAST_EN _SB_MAKEMASK1(1) +#define M_MAC_UCAST_INV _SB_MAKEMASK1(2) +#define M_MAC_MCAST_EN _SB_MAKEMASK1(3) +#define M_MAC_MCAST_INV _SB_MAKEMASK1(4) +#define M_MAC_BCAST_EN _SB_MAKEMASK1(5) +#define M_MAC_DIRECT_INV _SB_MAKEMASK1(6) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_ALLMCAST_EN _SB_MAKEMASK1(7) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#define S_MAC_IPHDR_OFFSET _SB_MAKE64(8) +#define M_MAC_IPHDR_OFFSET _SB_MAKEMASK(8, S_MAC_IPHDR_OFFSET) +#define V_MAC_IPHDR_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_IPHDR_OFFSET) +#define G_MAC_IPHDR_OFFSET(x) _SB_GETVALUE(x, S_MAC_IPHDR_OFFSET, M_MAC_IPHDR_OFFSET) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_MAC_RX_CRC_OFFSET _SB_MAKE64(16) +#define M_MAC_RX_CRC_OFFSET _SB_MAKEMASK(8, S_MAC_RX_CRC_OFFSET) +#define V_MAC_RX_CRC_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_RX_CRC_OFFSET) +#define G_MAC_RX_CRC_OFFSET(x) _SB_GETVALUE(x, S_MAC_RX_CRC_OFFSET, M_MAC_RX_CRC_OFFSET) + +#define S_MAC_RX_PKT_OFFSET _SB_MAKE64(24) +#define M_MAC_RX_PKT_OFFSET _SB_MAKEMASK(8, S_MAC_RX_PKT_OFFSET) +#define V_MAC_RX_PKT_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_RX_PKT_OFFSET) +#define G_MAC_RX_PKT_OFFSET(x) _SB_GETVALUE(x, S_MAC_RX_PKT_OFFSET, M_MAC_RX_PKT_OFFSET) + +#define M_MAC_FWDPAUSE_EN _SB_MAKEMASK1(32) +#define M_MAC_VLAN_DET_EN _SB_MAKEMASK1(33) + +#define S_MAC_RX_CH_MSN_SEL _SB_MAKE64(34) +#define M_MAC_RX_CH_MSN_SEL _SB_MAKEMASK(8, S_MAC_RX_CH_MSN_SEL) +#define V_MAC_RX_CH_MSN_SEL(x) _SB_MAKEVALUE(x, S_MAC_RX_CH_MSN_SEL) +#define G_MAC_RX_CH_MSN_SEL(x) _SB_GETVALUE(x, S_MAC_RX_CH_MSN_SEL, M_MAC_RX_CH_MSN_SEL) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +/* + * MAC Receive Channel Select Registers (Table 9-25) + */ + +/* no bitfields */ + +/* + * MAC MII Management Interface Registers (Table 9-26) + * Register: MAC_MDIO_0 + * Register: MAC_MDIO_1 + * Register: MAC_MDIO_2 + */ + +#define S_MAC_MDC 0 +#define S_MAC_MDIO_DIR 1 +#define S_MAC_MDIO_OUT 2 +#define S_MAC_GENC 3 +#define S_MAC_MDIO_IN 4 + +#define M_MAC_MDC _SB_MAKEMASK1(S_MAC_MDC) +#define M_MAC_MDIO_DIR _SB_MAKEMASK1(S_MAC_MDIO_DIR) +#define M_MAC_MDIO_DIR_INPUT _SB_MAKEMASK1(S_MAC_MDIO_DIR) +#define M_MAC_MDIO_OUT _SB_MAKEMASK1(S_MAC_MDIO_OUT) +#define M_MAC_GENC _SB_MAKEMASK1(S_MAC_GENC) +#define M_MAC_MDIO_IN _SB_MAKEMASK1(S_MAC_MDIO_IN) + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_mc.h b/arch/mips/include/asm/sibyte/sb1250_mc.h new file mode 100644 index 000000000000..1eb1b5a88736 --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_mc.h @@ -0,0 +1,550 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * Memory Controller constants File: sb1250_mc.h + * + * This module contains constants and macros useful for + * programming the memory controller. + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000, 2001, 2002, 2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_MC_H +#define _SB1250_MC_H + +#include "sb1250_defs.h" + +/* + * Memory Channel Config Register (table 6-14) + */ + +#define S_MC_RESERVED0 0 +#define M_MC_RESERVED0 _SB_MAKEMASK(8, S_MC_RESERVED0) + +#define S_MC_CHANNEL_SEL 8 +#define M_MC_CHANNEL_SEL _SB_MAKEMASK(8, S_MC_CHANNEL_SEL) +#define V_MC_CHANNEL_SEL(x) _SB_MAKEVALUE(x, S_MC_CHANNEL_SEL) +#define G_MC_CHANNEL_SEL(x) _SB_GETVALUE(x, S_MC_CHANNEL_SEL, M_MC_CHANNEL_SEL) + +#define S_MC_BANK0_MAP 16 +#define M_MC_BANK0_MAP _SB_MAKEMASK(4, S_MC_BANK0_MAP) +#define V_MC_BANK0_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK0_MAP) +#define G_MC_BANK0_MAP(x) _SB_GETVALUE(x, S_MC_BANK0_MAP, M_MC_BANK0_MAP) + +#define K_MC_BANK0_MAP_DEFAULT 0x00 +#define V_MC_BANK0_MAP_DEFAULT V_MC_BANK0_MAP(K_MC_BANK0_MAP_DEFAULT) + +#define S_MC_BANK1_MAP 20 +#define M_MC_BANK1_MAP _SB_MAKEMASK(4, S_MC_BANK1_MAP) +#define V_MC_BANK1_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK1_MAP) +#define G_MC_BANK1_MAP(x) _SB_GETVALUE(x, S_MC_BANK1_MAP, M_MC_BANK1_MAP) + +#define K_MC_BANK1_MAP_DEFAULT 0x08 +#define V_MC_BANK1_MAP_DEFAULT V_MC_BANK1_MAP(K_MC_BANK1_MAP_DEFAULT) + +#define S_MC_BANK2_MAP 24 +#define M_MC_BANK2_MAP _SB_MAKEMASK(4, S_MC_BANK2_MAP) +#define V_MC_BANK2_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK2_MAP) +#define G_MC_BANK2_MAP(x) _SB_GETVALUE(x, S_MC_BANK2_MAP, M_MC_BANK2_MAP) + +#define K_MC_BANK2_MAP_DEFAULT 0x09 +#define V_MC_BANK2_MAP_DEFAULT V_MC_BANK2_MAP(K_MC_BANK2_MAP_DEFAULT) + +#define S_MC_BANK3_MAP 28 +#define M_MC_BANK3_MAP _SB_MAKEMASK(4, S_MC_BANK3_MAP) +#define V_MC_BANK3_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK3_MAP) +#define G_MC_BANK3_MAP(x) _SB_GETVALUE(x, S_MC_BANK3_MAP, M_MC_BANK3_MAP) + +#define K_MC_BANK3_MAP_DEFAULT 0x0C +#define V_MC_BANK3_MAP_DEFAULT V_MC_BANK3_MAP(K_MC_BANK3_MAP_DEFAULT) + +#define M_MC_RESERVED1 _SB_MAKEMASK(8, 32) + +#define S_MC_QUEUE_SIZE 40 +#define M_MC_QUEUE_SIZE _SB_MAKEMASK(4, S_MC_QUEUE_SIZE) +#define V_MC_QUEUE_SIZE(x) _SB_MAKEVALUE(x, S_MC_QUEUE_SIZE) +#define G_MC_QUEUE_SIZE(x) _SB_GETVALUE(x, S_MC_QUEUE_SIZE, M_MC_QUEUE_SIZE) +#define V_MC_QUEUE_SIZE_DEFAULT V_MC_QUEUE_SIZE(0x0A) + +#define S_MC_AGE_LIMIT 44 +#define M_MC_AGE_LIMIT _SB_MAKEMASK(4, S_MC_AGE_LIMIT) +#define V_MC_AGE_LIMIT(x) _SB_MAKEVALUE(x, S_MC_AGE_LIMIT) +#define G_MC_AGE_LIMIT(x) _SB_GETVALUE(x, S_MC_AGE_LIMIT, M_MC_AGE_LIMIT) +#define V_MC_AGE_LIMIT_DEFAULT V_MC_AGE_LIMIT(8) + +#define S_MC_WR_LIMIT 48 +#define M_MC_WR_LIMIT _SB_MAKEMASK(4, S_MC_WR_LIMIT) +#define V_MC_WR_LIMIT(x) _SB_MAKEVALUE(x, S_MC_WR_LIMIT) +#define G_MC_WR_LIMIT(x) _SB_GETVALUE(x, S_MC_WR_LIMIT, M_MC_WR_LIMIT) +#define V_MC_WR_LIMIT_DEFAULT V_MC_WR_LIMIT(5) + +#define M_MC_IOB1HIGHPRIORITY _SB_MAKEMASK1(52) + +#define M_MC_RESERVED2 _SB_MAKEMASK(3, 53) + +#define S_MC_CS_MODE 56 +#define M_MC_CS_MODE _SB_MAKEMASK(4, S_MC_CS_MODE) +#define V_MC_CS_MODE(x) _SB_MAKEVALUE(x, S_MC_CS_MODE) +#define G_MC_CS_MODE(x) _SB_GETVALUE(x, S_MC_CS_MODE, M_MC_CS_MODE) + +#define K_MC_CS_MODE_MSB_CS 0 +#define K_MC_CS_MODE_INTLV_CS 15 +#define K_MC_CS_MODE_MIXED_CS_10 12 +#define K_MC_CS_MODE_MIXED_CS_30 6 +#define K_MC_CS_MODE_MIXED_CS_32 3 + +#define V_MC_CS_MODE_MSB_CS V_MC_CS_MODE(K_MC_CS_MODE_MSB_CS) +#define V_MC_CS_MODE_INTLV_CS V_MC_CS_MODE(K_MC_CS_MODE_INTLV_CS) +#define V_MC_CS_MODE_MIXED_CS_10 V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_10) +#define V_MC_CS_MODE_MIXED_CS_30 V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_30) +#define V_MC_CS_MODE_MIXED_CS_32 V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_32) + +#define M_MC_ECC_DISABLE _SB_MAKEMASK1(60) +#define M_MC_BERR_DISABLE _SB_MAKEMASK1(61) +#define M_MC_FORCE_SEQ _SB_MAKEMASK1(62) +#define M_MC_DEBUG _SB_MAKEMASK1(63) + +#define V_MC_CONFIG_DEFAULT V_MC_WR_LIMIT_DEFAULT | V_MC_AGE_LIMIT_DEFAULT | \ + V_MC_BANK0_MAP_DEFAULT | V_MC_BANK1_MAP_DEFAULT | \ + V_MC_BANK2_MAP_DEFAULT | V_MC_BANK3_MAP_DEFAULT | V_MC_CHANNEL_SEL(0) | \ + M_MC_IOB1HIGHPRIORITY | V_MC_QUEUE_SIZE_DEFAULT + + +/* + * Memory clock config register (Table 6-15) + * + * Note: this field has been updated to be consistent with the errata to 0.2 + */ + +#define S_MC_CLK_RATIO 0 +#define M_MC_CLK_RATIO _SB_MAKEMASK(4, S_MC_CLK_RATIO) +#define V_MC_CLK_RATIO(x) _SB_MAKEVALUE(x, S_MC_CLK_RATIO) +#define G_MC_CLK_RATIO(x) _SB_GETVALUE(x, S_MC_CLK_RATIO, M_MC_CLK_RATIO) + +#define K_MC_CLK_RATIO_2X 4 +#define K_MC_CLK_RATIO_25X 5 +#define K_MC_CLK_RATIO_3X 6 +#define K_MC_CLK_RATIO_35X 7 +#define K_MC_CLK_RATIO_4X 8 +#define K_MC_CLK_RATIO_45X 9 + +#define V_MC_CLK_RATIO_2X V_MC_CLK_RATIO(K_MC_CLK_RATIO_2X) +#define V_MC_CLK_RATIO_25X V_MC_CLK_RATIO(K_MC_CLK_RATIO_25X) +#define V_MC_CLK_RATIO_3X V_MC_CLK_RATIO(K_MC_CLK_RATIO_3X) +#define V_MC_CLK_RATIO_35X V_MC_CLK_RATIO(K_MC_CLK_RATIO_35X) +#define V_MC_CLK_RATIO_4X V_MC_CLK_RATIO(K_MC_CLK_RATIO_4X) +#define V_MC_CLK_RATIO_45X V_MC_CLK_RATIO(K_MC_CLK_RATIO_45X) +#define V_MC_CLK_RATIO_DEFAULT V_MC_CLK_RATIO_25X + +#define S_MC_REF_RATE 8 +#define M_MC_REF_RATE _SB_MAKEMASK(8, S_MC_REF_RATE) +#define V_MC_REF_RATE(x) _SB_MAKEVALUE(x, S_MC_REF_RATE) +#define G_MC_REF_RATE(x) _SB_GETVALUE(x, S_MC_REF_RATE, M_MC_REF_RATE) + +#define K_MC_REF_RATE_100MHz 0x62 +#define K_MC_REF_RATE_133MHz 0x81 +#define K_MC_REF_RATE_200MHz 0xC4 + +#define V_MC_REF_RATE_100MHz V_MC_REF_RATE(K_MC_REF_RATE_100MHz) +#define V_MC_REF_RATE_133MHz V_MC_REF_RATE(K_MC_REF_RATE_133MHz) +#define V_MC_REF_RATE_200MHz V_MC_REF_RATE(K_MC_REF_RATE_200MHz) +#define V_MC_REF_RATE_DEFAULT V_MC_REF_RATE_100MHz + +#define S_MC_CLOCK_DRIVE 16 +#define M_MC_CLOCK_DRIVE _SB_MAKEMASK(4, S_MC_CLOCK_DRIVE) +#define V_MC_CLOCK_DRIVE(x) _SB_MAKEVALUE(x, S_MC_CLOCK_DRIVE) +#define G_MC_CLOCK_DRIVE(x) _SB_GETVALUE(x, S_MC_CLOCK_DRIVE, M_MC_CLOCK_DRIVE) +#define V_MC_CLOCK_DRIVE_DEFAULT V_MC_CLOCK_DRIVE(0xF) + +#define S_MC_DATA_DRIVE 20 +#define M_MC_DATA_DRIVE _SB_MAKEMASK(4, S_MC_DATA_DRIVE) +#define V_MC_DATA_DRIVE(x) _SB_MAKEVALUE(x, S_MC_DATA_DRIVE) +#define G_MC_DATA_DRIVE(x) _SB_GETVALUE(x, S_MC_DATA_DRIVE, M_MC_DATA_DRIVE) +#define V_MC_DATA_DRIVE_DEFAULT V_MC_DATA_DRIVE(0x0) + +#define S_MC_ADDR_DRIVE 24 +#define M_MC_ADDR_DRIVE _SB_MAKEMASK(4, S_MC_ADDR_DRIVE) +#define V_MC_ADDR_DRIVE(x) _SB_MAKEVALUE(x, S_MC_ADDR_DRIVE) +#define G_MC_ADDR_DRIVE(x) _SB_GETVALUE(x, S_MC_ADDR_DRIVE, M_MC_ADDR_DRIVE) +#define V_MC_ADDR_DRIVE_DEFAULT V_MC_ADDR_DRIVE(0x0) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define M_MC_REF_DISABLE _SB_MAKEMASK1(30) +#endif /* 1250 PASS3 || 112x PASS1 */ + +#define M_MC_DLL_BYPASS _SB_MAKEMASK1(31) + +#define S_MC_DQI_SKEW 32 +#define M_MC_DQI_SKEW _SB_MAKEMASK(8, S_MC_DQI_SKEW) +#define V_MC_DQI_SKEW(x) _SB_MAKEVALUE(x, S_MC_DQI_SKEW) +#define G_MC_DQI_SKEW(x) _SB_GETVALUE(x, S_MC_DQI_SKEW, M_MC_DQI_SKEW) +#define V_MC_DQI_SKEW_DEFAULT V_MC_DQI_SKEW(0) + +#define S_MC_DQO_SKEW 40 +#define M_MC_DQO_SKEW _SB_MAKEMASK(8, S_MC_DQO_SKEW) +#define V_MC_DQO_SKEW(x) _SB_MAKEVALUE(x, S_MC_DQO_SKEW) +#define G_MC_DQO_SKEW(x) _SB_GETVALUE(x, S_MC_DQO_SKEW, M_MC_DQO_SKEW) +#define V_MC_DQO_SKEW_DEFAULT V_MC_DQO_SKEW(0) + +#define S_MC_ADDR_SKEW 48 +#define M_MC_ADDR_SKEW _SB_MAKEMASK(8, S_MC_ADDR_SKEW) +#define V_MC_ADDR_SKEW(x) _SB_MAKEVALUE(x, S_MC_ADDR_SKEW) +#define G_MC_ADDR_SKEW(x) _SB_GETVALUE(x, S_MC_ADDR_SKEW, M_MC_ADDR_SKEW) +#define V_MC_ADDR_SKEW_DEFAULT V_MC_ADDR_SKEW(0x0F) + +#define S_MC_DLL_DEFAULT 56 +#define M_MC_DLL_DEFAULT _SB_MAKEMASK(8, S_MC_DLL_DEFAULT) +#define V_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x, S_MC_DLL_DEFAULT) +#define G_MC_DLL_DEFAULT(x) _SB_GETVALUE(x, S_MC_DLL_DEFAULT, M_MC_DLL_DEFAULT) +#define V_MC_DLL_DEFAULT_DEFAULT V_MC_DLL_DEFAULT(0x10) + +#define V_MC_CLKCONFIG_DEFAULT V_MC_DLL_DEFAULT_DEFAULT | \ + V_MC_ADDR_SKEW_DEFAULT | \ + V_MC_DQO_SKEW_DEFAULT | \ + V_MC_DQI_SKEW_DEFAULT | \ + V_MC_ADDR_DRIVE_DEFAULT | \ + V_MC_DATA_DRIVE_DEFAULT | \ + V_MC_CLOCK_DRIVE_DEFAULT | \ + V_MC_REF_RATE_DEFAULT + + + +/* + * DRAM Command Register (Table 6-13) + */ + +#define S_MC_COMMAND 0 +#define M_MC_COMMAND _SB_MAKEMASK(4, S_MC_COMMAND) +#define V_MC_COMMAND(x) _SB_MAKEVALUE(x, S_MC_COMMAND) +#define G_MC_COMMAND(x) _SB_GETVALUE(x, S_MC_COMMAND, M_MC_COMMAND) + +#define K_MC_COMMAND_EMRS 0 +#define K_MC_COMMAND_MRS 1 +#define K_MC_COMMAND_PRE 2 +#define K_MC_COMMAND_AR 3 +#define K_MC_COMMAND_SETRFSH 4 +#define K_MC_COMMAND_CLRRFSH 5 +#define K_MC_COMMAND_SETPWRDN 6 +#define K_MC_COMMAND_CLRPWRDN 7 + +#define V_MC_COMMAND_EMRS V_MC_COMMAND(K_MC_COMMAND_EMRS) +#define V_MC_COMMAND_MRS V_MC_COMMAND(K_MC_COMMAND_MRS) +#define V_MC_COMMAND_PRE V_MC_COMMAND(K_MC_COMMAND_PRE) +#define V_MC_COMMAND_AR V_MC_COMMAND(K_MC_COMMAND_AR) +#define V_MC_COMMAND_SETRFSH V_MC_COMMAND(K_MC_COMMAND_SETRFSH) +#define V_MC_COMMAND_CLRRFSH V_MC_COMMAND(K_MC_COMMAND_CLRRFSH) +#define V_MC_COMMAND_SETPWRDN V_MC_COMMAND(K_MC_COMMAND_SETPWRDN) +#define V_MC_COMMAND_CLRPWRDN V_MC_COMMAND(K_MC_COMMAND_CLRPWRDN) + +#define M_MC_CS0 _SB_MAKEMASK1(4) +#define M_MC_CS1 _SB_MAKEMASK1(5) +#define M_MC_CS2 _SB_MAKEMASK1(6) +#define M_MC_CS3 _SB_MAKEMASK1(7) + +/* + * DRAM Mode Register (Table 6-14) + */ + +#define S_MC_EMODE 0 +#define M_MC_EMODE _SB_MAKEMASK(15, S_MC_EMODE) +#define V_MC_EMODE(x) _SB_MAKEVALUE(x, S_MC_EMODE) +#define G_MC_EMODE(x) _SB_GETVALUE(x, S_MC_EMODE, M_MC_EMODE) +#define V_MC_EMODE_DEFAULT V_MC_EMODE(0) + +#define S_MC_MODE 16 +#define M_MC_MODE _SB_MAKEMASK(15, S_MC_MODE) +#define V_MC_MODE(x) _SB_MAKEVALUE(x, S_MC_MODE) +#define G_MC_MODE(x) _SB_GETVALUE(x, S_MC_MODE, M_MC_MODE) +#define V_MC_MODE_DEFAULT V_MC_MODE(0x22) + +#define S_MC_DRAM_TYPE 32 +#define M_MC_DRAM_TYPE _SB_MAKEMASK(3, S_MC_DRAM_TYPE) +#define V_MC_DRAM_TYPE(x) _SB_MAKEVALUE(x, S_MC_DRAM_TYPE) +#define G_MC_DRAM_TYPE(x) _SB_GETVALUE(x, S_MC_DRAM_TYPE, M_MC_DRAM_TYPE) + +#define K_MC_DRAM_TYPE_JEDEC 0 +#define K_MC_DRAM_TYPE_FCRAM 1 +#define K_MC_DRAM_TYPE_SGRAM 2 + +#define V_MC_DRAM_TYPE_JEDEC V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_JEDEC) +#define V_MC_DRAM_TYPE_FCRAM V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_FCRAM) +#define V_MC_DRAM_TYPE_SGRAM V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_SGRAM) + +#define M_MC_EXTERNALDECODE _SB_MAKEMASK1(35) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define M_MC_PRE_ON_A8 _SB_MAKEMASK1(36) +#define M_MC_RAM_WITH_A13 _SB_MAKEMASK1(37) +#endif /* 1250 PASS3 || 112x PASS1 */ + + + +/* + * SDRAM Timing Register (Table 6-15) + */ + +#define M_MC_w2rIDLE_TWOCYCLES _SB_MAKEMASK1(60) +#define M_MC_r2wIDLE_TWOCYCLES _SB_MAKEMASK1(61) +#define M_MC_r2rIDLE_TWOCYCLES _SB_MAKEMASK1(62) + +#define S_MC_tFIFO 56 +#define M_MC_tFIFO _SB_MAKEMASK(4, S_MC_tFIFO) +#define V_MC_tFIFO(x) _SB_MAKEVALUE(x, S_MC_tFIFO) +#define G_MC_tFIFO(x) _SB_GETVALUE(x, S_MC_tFIFO, M_MC_tFIFO) +#define K_MC_tFIFO_DEFAULT 1 +#define V_MC_tFIFO_DEFAULT V_MC_tFIFO(K_MC_tFIFO_DEFAULT) + +#define S_MC_tRFC 52 +#define M_MC_tRFC _SB_MAKEMASK(4, S_MC_tRFC) +#define V_MC_tRFC(x) _SB_MAKEVALUE(x, S_MC_tRFC) +#define G_MC_tRFC(x) _SB_GETVALUE(x, S_MC_tRFC, M_MC_tRFC) +#define K_MC_tRFC_DEFAULT 12 +#define V_MC_tRFC_DEFAULT V_MC_tRFC(K_MC_tRFC_DEFAULT) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) +#define M_MC_tRFC_PLUS16 _SB_MAKEMASK1(51) /* 1250C3 and later. */ +#endif + +#define S_MC_tCwCr 40 +#define M_MC_tCwCr _SB_MAKEMASK(4, S_MC_tCwCr) +#define V_MC_tCwCr(x) _SB_MAKEVALUE(x, S_MC_tCwCr) +#define G_MC_tCwCr(x) _SB_GETVALUE(x, S_MC_tCwCr, M_MC_tCwCr) +#define K_MC_tCwCr_DEFAULT 4 +#define V_MC_tCwCr_DEFAULT V_MC_tCwCr(K_MC_tCwCr_DEFAULT) + +#define S_MC_tRCr 28 +#define M_MC_tRCr _SB_MAKEMASK(4, S_MC_tRCr) +#define V_MC_tRCr(x) _SB_MAKEVALUE(x, S_MC_tRCr) +#define G_MC_tRCr(x) _SB_GETVALUE(x, S_MC_tRCr, M_MC_tRCr) +#define K_MC_tRCr_DEFAULT 9 +#define V_MC_tRCr_DEFAULT V_MC_tRCr(K_MC_tRCr_DEFAULT) + +#define S_MC_tRCw 24 +#define M_MC_tRCw _SB_MAKEMASK(4, S_MC_tRCw) +#define V_MC_tRCw(x) _SB_MAKEVALUE(x, S_MC_tRCw) +#define G_MC_tRCw(x) _SB_GETVALUE(x, S_MC_tRCw, M_MC_tRCw) +#define K_MC_tRCw_DEFAULT 10 +#define V_MC_tRCw_DEFAULT V_MC_tRCw(K_MC_tRCw_DEFAULT) + +#define S_MC_tRRD 20 +#define M_MC_tRRD _SB_MAKEMASK(4, S_MC_tRRD) +#define V_MC_tRRD(x) _SB_MAKEVALUE(x, S_MC_tRRD) +#define G_MC_tRRD(x) _SB_GETVALUE(x, S_MC_tRRD, M_MC_tRRD) +#define K_MC_tRRD_DEFAULT 2 +#define V_MC_tRRD_DEFAULT V_MC_tRRD(K_MC_tRRD_DEFAULT) + +#define S_MC_tRP 16 +#define M_MC_tRP _SB_MAKEMASK(4, S_MC_tRP) +#define V_MC_tRP(x) _SB_MAKEVALUE(x, S_MC_tRP) +#define G_MC_tRP(x) _SB_GETVALUE(x, S_MC_tRP, M_MC_tRP) +#define K_MC_tRP_DEFAULT 4 +#define V_MC_tRP_DEFAULT V_MC_tRP(K_MC_tRP_DEFAULT) + +#define S_MC_tCwD 8 +#define M_MC_tCwD _SB_MAKEMASK(4, S_MC_tCwD) +#define V_MC_tCwD(x) _SB_MAKEVALUE(x, S_MC_tCwD) +#define G_MC_tCwD(x) _SB_GETVALUE(x, S_MC_tCwD, M_MC_tCwD) +#define K_MC_tCwD_DEFAULT 1 +#define V_MC_tCwD_DEFAULT V_MC_tCwD(K_MC_tCwD_DEFAULT) + +#define M_tCrDh _SB_MAKEMASK1(7) +#define M_MC_tCrDh M_tCrDh + +#define S_MC_tCrD 4 +#define M_MC_tCrD _SB_MAKEMASK(3, S_MC_tCrD) +#define V_MC_tCrD(x) _SB_MAKEVALUE(x, S_MC_tCrD) +#define G_MC_tCrD(x) _SB_GETVALUE(x, S_MC_tCrD, M_MC_tCrD) +#define K_MC_tCrD_DEFAULT 2 +#define V_MC_tCrD_DEFAULT V_MC_tCrD(K_MC_tCrD_DEFAULT) + +#define S_MC_tRCD 0 +#define M_MC_tRCD _SB_MAKEMASK(4, S_MC_tRCD) +#define V_MC_tRCD(x) _SB_MAKEVALUE(x, S_MC_tRCD) +#define G_MC_tRCD(x) _SB_GETVALUE(x, S_MC_tRCD, M_MC_tRCD) +#define K_MC_tRCD_DEFAULT 3 +#define V_MC_tRCD_DEFAULT V_MC_tRCD(K_MC_tRCD_DEFAULT) + +#define V_MC_TIMING_DEFAULT V_MC_tFIFO(K_MC_tFIFO_DEFAULT) | \ + V_MC_tRFC(K_MC_tRFC_DEFAULT) | \ + V_MC_tCwCr(K_MC_tCwCr_DEFAULT) | \ + V_MC_tRCr(K_MC_tRCr_DEFAULT) | \ + V_MC_tRCw(K_MC_tRCw_DEFAULT) | \ + V_MC_tRRD(K_MC_tRRD_DEFAULT) | \ + V_MC_tRP(K_MC_tRP_DEFAULT) | \ + V_MC_tCwD(K_MC_tCwD_DEFAULT) | \ + V_MC_tCrD(K_MC_tCrD_DEFAULT) | \ + V_MC_tRCD(K_MC_tRCD_DEFAULT) | \ + M_MC_r2rIDLE_TWOCYCLES + +/* + * Errata says these are not the default + * M_MC_w2rIDLE_TWOCYCLES | \ + * M_MC_r2wIDLE_TWOCYCLES | \ + */ + + +/* + * Chip Select Start Address Register (Table 6-17) + */ + +#define S_MC_CS0_START 0 +#define M_MC_CS0_START _SB_MAKEMASK(16, S_MC_CS0_START) +#define V_MC_CS0_START(x) _SB_MAKEVALUE(x, S_MC_CS0_START) +#define G_MC_CS0_START(x) _SB_GETVALUE(x, S_MC_CS0_START, M_MC_CS0_START) + +#define S_MC_CS1_START 16 +#define M_MC_CS1_START _SB_MAKEMASK(16, S_MC_CS1_START) +#define V_MC_CS1_START(x) _SB_MAKEVALUE(x, S_MC_CS1_START) +#define G_MC_CS1_START(x) _SB_GETVALUE(x, S_MC_CS1_START, M_MC_CS1_START) + +#define S_MC_CS2_START 32 +#define M_MC_CS2_START _SB_MAKEMASK(16, S_MC_CS2_START) +#define V_MC_CS2_START(x) _SB_MAKEVALUE(x, S_MC_CS2_START) +#define G_MC_CS2_START(x) _SB_GETVALUE(x, S_MC_CS2_START, M_MC_CS2_START) + +#define S_MC_CS3_START 48 +#define M_MC_CS3_START _SB_MAKEMASK(16, S_MC_CS3_START) +#define V_MC_CS3_START(x) _SB_MAKEVALUE(x, S_MC_CS3_START) +#define G_MC_CS3_START(x) _SB_GETVALUE(x, S_MC_CS3_START, M_MC_CS3_START) + +/* + * Chip Select End Address Register (Table 6-18) + */ + +#define S_MC_CS0_END 0 +#define M_MC_CS0_END _SB_MAKEMASK(16, S_MC_CS0_END) +#define V_MC_CS0_END(x) _SB_MAKEVALUE(x, S_MC_CS0_END) +#define G_MC_CS0_END(x) _SB_GETVALUE(x, S_MC_CS0_END, M_MC_CS0_END) + +#define S_MC_CS1_END 16 +#define M_MC_CS1_END _SB_MAKEMASK(16, S_MC_CS1_END) +#define V_MC_CS1_END(x) _SB_MAKEVALUE(x, S_MC_CS1_END) +#define G_MC_CS1_END(x) _SB_GETVALUE(x, S_MC_CS1_END, M_MC_CS1_END) + +#define S_MC_CS2_END 32 +#define M_MC_CS2_END _SB_MAKEMASK(16, S_MC_CS2_END) +#define V_MC_CS2_END(x) _SB_MAKEVALUE(x, S_MC_CS2_END) +#define G_MC_CS2_END(x) _SB_GETVALUE(x, S_MC_CS2_END, M_MC_CS2_END) + +#define S_MC_CS3_END 48 +#define M_MC_CS3_END _SB_MAKEMASK(16, S_MC_CS3_END) +#define V_MC_CS3_END(x) _SB_MAKEVALUE(x, S_MC_CS3_END) +#define G_MC_CS3_END(x) _SB_GETVALUE(x, S_MC_CS3_END, M_MC_CS3_END) + +/* + * Chip Select Interleave Register (Table 6-19) + */ + +#define S_MC_INTLV_RESERVED 0 +#define M_MC_INTLV_RESERVED _SB_MAKEMASK(5, S_MC_INTLV_RESERVED) + +#define S_MC_INTERLEAVE 7 +#define M_MC_INTERLEAVE _SB_MAKEMASK(18, S_MC_INTERLEAVE) +#define V_MC_INTERLEAVE(x) _SB_MAKEVALUE(x, S_MC_INTERLEAVE) + +#define S_MC_INTLV_MBZ 25 +#define M_MC_INTLV_MBZ _SB_MAKEMASK(39, S_MC_INTLV_MBZ) + +/* + * Row Address Bits Register (Table 6-20) + */ + +#define S_MC_RAS_RESERVED 0 +#define M_MC_RAS_RESERVED _SB_MAKEMASK(5, S_MC_RAS_RESERVED) + +#define S_MC_RAS_SELECT 12 +#define M_MC_RAS_SELECT _SB_MAKEMASK(25, S_MC_RAS_SELECT) +#define V_MC_RAS_SELECT(x) _SB_MAKEVALUE(x, S_MC_RAS_SELECT) + +#define S_MC_RAS_MBZ 37 +#define M_MC_RAS_MBZ _SB_MAKEMASK(27, S_MC_RAS_MBZ) + + +/* + * Column Address Bits Register (Table 6-21) + */ + +#define S_MC_CAS_RESERVED 0 +#define M_MC_CAS_RESERVED _SB_MAKEMASK(5, S_MC_CAS_RESERVED) + +#define S_MC_CAS_SELECT 5 +#define M_MC_CAS_SELECT _SB_MAKEMASK(18, S_MC_CAS_SELECT) +#define V_MC_CAS_SELECT(x) _SB_MAKEVALUE(x, S_MC_CAS_SELECT) + +#define S_MC_CAS_MBZ 23 +#define M_MC_CAS_MBZ _SB_MAKEMASK(41, S_MC_CAS_MBZ) + + +/* + * Bank Address Address Bits Register (Table 6-22) + */ + +#define S_MC_BA_RESERVED 0 +#define M_MC_BA_RESERVED _SB_MAKEMASK(5, S_MC_BA_RESERVED) + +#define S_MC_BA_SELECT 5 +#define M_MC_BA_SELECT _SB_MAKEMASK(20, S_MC_BA_SELECT) +#define V_MC_BA_SELECT(x) _SB_MAKEVALUE(x, S_MC_BA_SELECT) + +#define S_MC_BA_MBZ 25 +#define M_MC_BA_MBZ _SB_MAKEMASK(39, S_MC_BA_MBZ) + +/* + * Chip Select Attribute Register (Table 6-23) + */ + +#define K_MC_CS_ATTR_CLOSED 0 +#define K_MC_CS_ATTR_CASCHECK 1 +#define K_MC_CS_ATTR_HINT 2 +#define K_MC_CS_ATTR_OPEN 3 + +#define S_MC_CS0_PAGE 0 +#define M_MC_CS0_PAGE _SB_MAKEMASK(2, S_MC_CS0_PAGE) +#define V_MC_CS0_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS0_PAGE) +#define G_MC_CS0_PAGE(x) _SB_GETVALUE(x, S_MC_CS0_PAGE, M_MC_CS0_PAGE) + +#define S_MC_CS1_PAGE 16 +#define M_MC_CS1_PAGE _SB_MAKEMASK(2, S_MC_CS1_PAGE) +#define V_MC_CS1_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS1_PAGE) +#define G_MC_CS1_PAGE(x) _SB_GETVALUE(x, S_MC_CS1_PAGE, M_MC_CS1_PAGE) + +#define S_MC_CS2_PAGE 32 +#define M_MC_CS2_PAGE _SB_MAKEMASK(2, S_MC_CS2_PAGE) +#define V_MC_CS2_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS2_PAGE) +#define G_MC_CS2_PAGE(x) _SB_GETVALUE(x, S_MC_CS2_PAGE, M_MC_CS2_PAGE) + +#define S_MC_CS3_PAGE 48 +#define M_MC_CS3_PAGE _SB_MAKEMASK(2, S_MC_CS3_PAGE) +#define V_MC_CS3_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS3_PAGE) +#define G_MC_CS3_PAGE(x) _SB_GETVALUE(x, S_MC_CS3_PAGE, M_MC_CS3_PAGE) + +/* + * ECC Test ECC Register (Table 6-25) + */ + +#define S_MC_ECC_INVERT 0 +#define M_MC_ECC_INVERT _SB_MAKEMASK(8, S_MC_ECC_INVERT) + + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_regs.h b/arch/mips/include/asm/sibyte/sb1250_regs.h new file mode 100644 index 000000000000..8f53ec817a5e --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_regs.h @@ -0,0 +1,893 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * Register Definitions File: sb1250_regs.h + * + * This module contains the addresses of the on-chip peripherals + * on the SB1250. + * + * SB1250 specification level: 01/02/2002 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_REGS_H +#define _SB1250_REGS_H + +#include "sb1250_defs.h" + + +/* ********************************************************************* + * Some general notes: + * + * For the most part, when there is more than one peripheral + * of the same type on the SOC, the constants below will be + * offsets from the base of each peripheral. For example, + * the MAC registers are described as offsets from the first + * MAC register, and there will be a MAC_REGISTER() macro + * to calculate the base address of a given MAC. + * + * The information in this file is based on the SB1250 SOC + * manual version 0.2, July 2000. + ********************************************************************* */ + + +/* ********************************************************************* + * Memory Controller Registers + ********************************************************************* */ + +/* + * XXX: can't remove MC base 0 if 112x, since it's used by other macros, + * since there is one reg there (but it could get its addr/offset constant). + */ + +#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */ +#define A_MC_BASE_0 0x0010051000 +#define A_MC_BASE_1 0x0010052000 +#define MC_REGISTER_SPACING 0x1000 + +#define A_MC_BASE(ctlid) ((ctlid)*MC_REGISTER_SPACING+A_MC_BASE_0) +#define A_MC_REGISTER(ctlid, reg) (A_MC_BASE(ctlid)+(reg)) + +#define R_MC_CONFIG 0x0000000100 +#define R_MC_DRAMCMD 0x0000000120 +#define R_MC_DRAMMODE 0x0000000140 +#define R_MC_TIMING1 0x0000000160 +#define R_MC_TIMING2 0x0000000180 +#define R_MC_CS_START 0x00000001A0 +#define R_MC_CS_END 0x00000001C0 +#define R_MC_CS_INTERLEAVE 0x00000001E0 +#define S_MC_CS_STARTEND 16 + +#define R_MC_CSX_BASE 0x0000000200 +#define R_MC_CSX_ROW 0x0000000000 /* relative to CSX_BASE, above */ +#define R_MC_CSX_COL 0x0000000020 /* relative to CSX_BASE, above */ +#define R_MC_CSX_BA 0x0000000040 /* relative to CSX_BASE, above */ +#define MC_CSX_SPACING 0x0000000060 /* relative to CSX_BASE, above */ + +#define R_MC_CS0_ROW 0x0000000200 +#define R_MC_CS0_COL 0x0000000220 +#define R_MC_CS0_BA 0x0000000240 +#define R_MC_CS1_ROW 0x0000000260 +#define R_MC_CS1_COL 0x0000000280 +#define R_MC_CS1_BA 0x00000002A0 +#define R_MC_CS2_ROW 0x00000002C0 +#define R_MC_CS2_COL 0x00000002E0 +#define R_MC_CS2_BA 0x0000000300 +#define R_MC_CS3_ROW 0x0000000320 +#define R_MC_CS3_COL 0x0000000340 +#define R_MC_CS3_BA 0x0000000360 +#define R_MC_CS_ATTR 0x0000000380 +#define R_MC_TEST_DATA 0x0000000400 +#define R_MC_TEST_ECC 0x0000000420 +#define R_MC_MCLK_CFG 0x0000000500 + +#endif /* 1250 & 112x */ + +/* ********************************************************************* + * L2 Cache Control Registers + ********************************************************************* */ + +#if SIBYTE_HDR_FEATURE_1250_112x /* This L2C only on 1250/112x */ + +#define A_L2_READ_TAG 0x0010040018 +#define A_L2_ECC_TAG 0x0010040038 +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define A_L2_READ_MISC 0x0010040058 +#endif /* 1250 PASS3 || 112x PASS1 */ +#define A_L2_WAY_DISABLE 0x0010041000 +#define A_L2_MAKEDISABLE(x) (A_L2_WAY_DISABLE | (((~(x))&0x0F) << 8)) +#define A_L2_MGMT_TAG_BASE 0x00D0000000 + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define A_L2_CACHE_DISABLE 0x0010042000 +#define A_L2_MAKECACHEDISABLE(x) (A_L2_CACHE_DISABLE | (((x)&0x0F) << 8)) +#define A_L2_MISC_CONFIG 0x0010043000 +#endif /* 1250 PASS2 || 112x PASS1 */ + +/* Backward-compatibility definitions. */ +/* XXX: discourage people from using these constants. */ +#define A_L2_READ_ADDRESS A_L2_READ_TAG +#define A_L2_EEC_ADDRESS A_L2_ECC_TAG + +#endif + + +/* ********************************************************************* + * PCI Interface Registers + ********************************************************************* */ + +#if SIBYTE_HDR_FEATURE_1250_112x /* This PCI/HT only on 1250/112x */ +#define A_PCI_TYPE00_HEADER 0x00DE000000 +#define A_PCI_TYPE01_HEADER 0x00DE000800 +#endif + + +/* ********************************************************************* + * Ethernet DMA and MACs + ********************************************************************* */ + +#define A_MAC_BASE_0 0x0010064000 +#define A_MAC_BASE_1 0x0010065000 +#if SIBYTE_HDR_FEATURE_CHIP(1250) +#define A_MAC_BASE_2 0x0010066000 +#endif /* 1250 */ + +#define MAC_SPACING 0x1000 +#define MAC_DMA_TXRX_SPACING 0x0400 +#define MAC_DMA_CHANNEL_SPACING 0x0100 +#define DMA_RX 0 +#define DMA_TX 1 +#define MAC_NUM_DMACHAN 2 /* channels per direction */ + +/* XXX: not correct; depends on SOC type. */ +#define MAC_NUM_PORTS 3 + +#define A_MAC_CHANNEL_BASE(macnum) \ + (A_MAC_BASE_0 + \ + MAC_SPACING*(macnum)) + +#define A_MAC_REGISTER(macnum,reg) \ + (A_MAC_BASE_0 + \ + MAC_SPACING*(macnum) + (reg)) + + +#define R_MAC_DMA_CHANNELS 0x800 /* Relative to A_MAC_CHANNEL_BASE */ + +#define A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan) \ + ((A_MAC_CHANNEL_BASE(macnum)) + \ + R_MAC_DMA_CHANNELS + \ + (MAC_DMA_TXRX_SPACING*(txrx)) + \ + (MAC_DMA_CHANNEL_SPACING*(chan))) + +#define R_MAC_DMA_CHANNEL_BASE(txrx, chan) \ + (R_MAC_DMA_CHANNELS + \ + (MAC_DMA_TXRX_SPACING*(txrx)) + \ + (MAC_DMA_CHANNEL_SPACING*(chan))) + +#define A_MAC_DMA_REGISTER(macnum, txrx, chan, reg) \ + (A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan) + \ + (reg)) + +#define R_MAC_DMA_REGISTER(txrx, chan, reg) \ + (R_MAC_DMA_CHANNEL_BASE(txrx, chan) + \ + (reg)) + +/* + * DMA channel registers, relative to A_MAC_DMA_CHANNEL_BASE + */ + +#define R_MAC_DMA_CONFIG0 0x00000000 +#define R_MAC_DMA_CONFIG1 0x00000008 +#define R_MAC_DMA_DSCR_BASE 0x00000010 +#define R_MAC_DMA_DSCR_CNT 0x00000018 +#define R_MAC_DMA_CUR_DSCRA 0x00000020 +#define R_MAC_DMA_CUR_DSCRB 0x00000028 +#define R_MAC_DMA_CUR_DSCRADDR 0x00000030 +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define R_MAC_DMA_OODPKTLOST_RX 0x00000038 /* rx only */ +#endif /* 1250 PASS3 || 112x PASS1 */ + +/* + * RMON Counters + */ + +#define R_MAC_RMON_TX_BYTES 0x00000000 +#define R_MAC_RMON_COLLISIONS 0x00000008 +#define R_MAC_RMON_LATE_COL 0x00000010 +#define R_MAC_RMON_EX_COL 0x00000018 +#define R_MAC_RMON_FCS_ERROR 0x00000020 +#define R_MAC_RMON_TX_ABORT 0x00000028 +/* Counter #6 (0x30) now reserved */ +#define R_MAC_RMON_TX_BAD 0x00000038 +#define R_MAC_RMON_TX_GOOD 0x00000040 +#define R_MAC_RMON_TX_RUNT 0x00000048 +#define R_MAC_RMON_TX_OVERSIZE 0x00000050 +#define R_MAC_RMON_RX_BYTES 0x00000080 +#define R_MAC_RMON_RX_MCAST 0x00000088 +#define R_MAC_RMON_RX_BCAST 0x00000090 +#define R_MAC_RMON_RX_BAD 0x00000098 +#define R_MAC_RMON_RX_GOOD 0x000000A0 +#define R_MAC_RMON_RX_RUNT 0x000000A8 +#define R_MAC_RMON_RX_OVERSIZE 0x000000B0 +#define R_MAC_RMON_RX_FCS_ERROR 0x000000B8 +#define R_MAC_RMON_RX_LENGTH_ERROR 0x000000C0 +#define R_MAC_RMON_RX_CODE_ERROR 0x000000C8 +#define R_MAC_RMON_RX_ALIGN_ERROR 0x000000D0 + +/* Updated to spec 0.2 */ +#define R_MAC_CFG 0x00000100 +#define R_MAC_THRSH_CFG 0x00000108 +#define R_MAC_VLANTAG 0x00000110 +#define R_MAC_FRAMECFG 0x00000118 +#define R_MAC_EOPCNT 0x00000120 +#define R_MAC_FIFO_PTRS 0x00000128 +#define R_MAC_ADFILTER_CFG 0x00000200 +#define R_MAC_ETHERNET_ADDR 0x00000208 +#define R_MAC_PKT_TYPE 0x00000210 +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define R_MAC_ADMASK0 0x00000218 +#define R_MAC_ADMASK1 0x00000220 +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ +#define R_MAC_HASH_BASE 0x00000240 +#define R_MAC_ADDR_BASE 0x00000280 +#define R_MAC_CHLO0_BASE 0x00000300 +#define R_MAC_CHUP0_BASE 0x00000320 +#define R_MAC_ENABLE 0x00000400 +#define R_MAC_STATUS 0x00000408 +#define R_MAC_INT_MASK 0x00000410 +#define R_MAC_TXD_CTL 0x00000420 +#define R_MAC_MDIO 0x00000428 +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define R_MAC_STATUS1 0x00000430 +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ +#define R_MAC_DEBUG_STATUS 0x00000448 + +#define MAC_HASH_COUNT 8 +#define MAC_ADDR_COUNT 8 +#define MAC_CHMAP_COUNT 4 + + +/* ********************************************************************* + * DUART Registers + ********************************************************************* */ + + +#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */ +#define R_DUART_NUM_PORTS 2 + +#define A_DUART 0x0010060000 + +#define DUART_CHANREG_SPACING 0x100 + +#define A_DUART_CHANREG(chan, reg) \ + (A_DUART + DUART_CHANREG_SPACING * ((chan) + 1) + (reg)) +#endif /* 1250 & 112x */ + +#define R_DUART_MODE_REG_1 0x000 +#define R_DUART_MODE_REG_2 0x010 +#define R_DUART_STATUS 0x020 +#define R_DUART_CLK_SEL 0x030 +#define R_DUART_CMD 0x050 +#define R_DUART_RX_HOLD 0x060 +#define R_DUART_TX_HOLD 0x070 + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define R_DUART_FULL_CTL 0x040 +#define R_DUART_OPCR_X 0x080 +#define R_DUART_AUXCTL_X 0x090 +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + + +/* + * The IMR and ISR can't be addressed with A_DUART_CHANREG, + * so use these macros instead. + */ + +#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */ +#define DUART_IMRISR_SPACING 0x20 +#define DUART_INCHNG_SPACING 0x10 + +#define A_DUART_CTRLREG(reg) \ + (A_DUART + DUART_CHANREG_SPACING * 3 + (reg)) + +#define R_DUART_IMRREG(chan) \ + (R_DUART_IMR_A + (chan) * DUART_IMRISR_SPACING) +#define R_DUART_ISRREG(chan) \ + (R_DUART_ISR_A + (chan) * DUART_IMRISR_SPACING) +#define R_DUART_INCHREG(chan) \ + (R_DUART_IN_CHNG_A + (chan) * DUART_INCHNG_SPACING) + +#define A_DUART_IMRREG(chan) A_DUART_CTRLREG(R_DUART_IMRREG(chan)) +#define A_DUART_ISRREG(chan) A_DUART_CTRLREG(R_DUART_ISRREG(chan)) +#define A_DUART_INCHREG(chan) A_DUART_CTRLREG(R_DUART_INCHREG(chan)) +#endif /* 1250 & 112x */ + +#define R_DUART_AUX_CTRL 0x010 +#define R_DUART_ISR_A 0x020 +#define R_DUART_IMR_A 0x030 +#define R_DUART_ISR_B 0x040 +#define R_DUART_IMR_B 0x050 +#define R_DUART_OUT_PORT 0x060 +#define R_DUART_OPCR 0x070 +#define R_DUART_IN_PORT 0x080 + +#define R_DUART_SET_OPR 0x0B0 +#define R_DUART_CLEAR_OPR 0x0C0 +#define R_DUART_IN_CHNG_A 0x0D0 +#define R_DUART_IN_CHNG_B 0x0E0 + + +/* + * These constants are the absolute addresses. + */ + +#define A_DUART_MODE_REG_1_A 0x0010060100 +#define A_DUART_MODE_REG_2_A 0x0010060110 +#define A_DUART_STATUS_A 0x0010060120 +#define A_DUART_CLK_SEL_A 0x0010060130 +#define A_DUART_CMD_A 0x0010060150 +#define A_DUART_RX_HOLD_A 0x0010060160 +#define A_DUART_TX_HOLD_A 0x0010060170 + +#define A_DUART_MODE_REG_1_B 0x0010060200 +#define A_DUART_MODE_REG_2_B 0x0010060210 +#define A_DUART_STATUS_B 0x0010060220 +#define A_DUART_CLK_SEL_B 0x0010060230 +#define A_DUART_CMD_B 0x0010060250 +#define A_DUART_RX_HOLD_B 0x0010060260 +#define A_DUART_TX_HOLD_B 0x0010060270 + +#define A_DUART_INPORT_CHNG 0x0010060300 +#define A_DUART_AUX_CTRL 0x0010060310 +#define A_DUART_ISR_A 0x0010060320 +#define A_DUART_IMR_A 0x0010060330 +#define A_DUART_ISR_B 0x0010060340 +#define A_DUART_IMR_B 0x0010060350 +#define A_DUART_OUT_PORT 0x0010060360 +#define A_DUART_OPCR 0x0010060370 +#define A_DUART_IN_PORT 0x0010060380 +#define A_DUART_ISR 0x0010060390 +#define A_DUART_IMR 0x00100603A0 +#define A_DUART_SET_OPR 0x00100603B0 +#define A_DUART_CLEAR_OPR 0x00100603C0 +#define A_DUART_INPORT_CHNG_A 0x00100603D0 +#define A_DUART_INPORT_CHNG_B 0x00100603E0 + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define A_DUART_FULL_CTL_A 0x0010060140 +#define A_DUART_FULL_CTL_B 0x0010060240 + +#define A_DUART_OPCR_A 0x0010060180 +#define A_DUART_OPCR_B 0x0010060280 + +#define A_DUART_INPORT_CHNG_DEBUG 0x00100603F0 +#endif /* 1250 PASS2 || 112x PASS1 */ + + +/* ********************************************************************* + * Synchronous Serial Registers + ********************************************************************* */ + + +#if SIBYTE_HDR_FEATURE_1250_112x /* sync serial only on 1250/112x */ + +#define A_SER_BASE_0 0x0010060400 +#define A_SER_BASE_1 0x0010060800 +#define SER_SPACING 0x400 + +#define SER_DMA_TXRX_SPACING 0x80 + +#define SER_NUM_PORTS 2 + +#define A_SER_CHANNEL_BASE(sernum) \ + (A_SER_BASE_0 + \ + SER_SPACING*(sernum)) + +#define A_SER_REGISTER(sernum,reg) \ + (A_SER_BASE_0 + \ + SER_SPACING*(sernum) + (reg)) + + +#define R_SER_DMA_CHANNELS 0 /* Relative to A_SER_BASE_x */ + +#define A_SER_DMA_CHANNEL_BASE(sernum,txrx) \ + ((A_SER_CHANNEL_BASE(sernum)) + \ + R_SER_DMA_CHANNELS + \ + (SER_DMA_TXRX_SPACING*(txrx))) + +#define A_SER_DMA_REGISTER(sernum, txrx, reg) \ + (A_SER_DMA_CHANNEL_BASE(sernum, txrx) + \ + (reg)) + + +/* + * DMA channel registers, relative to A_SER_DMA_CHANNEL_BASE + */ + +#define R_SER_DMA_CONFIG0 0x00000000 +#define R_SER_DMA_CONFIG1 0x00000008 +#define R_SER_DMA_DSCR_BASE 0x00000010 +#define R_SER_DMA_DSCR_CNT 0x00000018 +#define R_SER_DMA_CUR_DSCRA 0x00000020 +#define R_SER_DMA_CUR_DSCRB 0x00000028 +#define R_SER_DMA_CUR_DSCRADDR 0x00000030 + +#define R_SER_DMA_CONFIG0_RX 0x00000000 +#define R_SER_DMA_CONFIG1_RX 0x00000008 +#define R_SER_DMA_DSCR_BASE_RX 0x00000010 +#define R_SER_DMA_DSCR_COUNT_RX 0x00000018 +#define R_SER_DMA_CUR_DSCR_A_RX 0x00000020 +#define R_SER_DMA_CUR_DSCR_B_RX 0x00000028 +#define R_SER_DMA_CUR_DSCR_ADDR_RX 0x00000030 + +#define R_SER_DMA_CONFIG0_TX 0x00000080 +#define R_SER_DMA_CONFIG1_TX 0x00000088 +#define R_SER_DMA_DSCR_BASE_TX 0x00000090 +#define R_SER_DMA_DSCR_COUNT_TX 0x00000098 +#define R_SER_DMA_CUR_DSCR_A_TX 0x000000A0 +#define R_SER_DMA_CUR_DSCR_B_TX 0x000000A8 +#define R_SER_DMA_CUR_DSCR_ADDR_TX 0x000000B0 + +#define R_SER_MODE 0x00000100 +#define R_SER_MINFRM_SZ 0x00000108 +#define R_SER_MAXFRM_SZ 0x00000110 +#define R_SER_ADDR 0x00000118 +#define R_SER_USR0_ADDR 0x00000120 +#define R_SER_USR1_ADDR 0x00000128 +#define R_SER_USR2_ADDR 0x00000130 +#define R_SER_USR3_ADDR 0x00000138 +#define R_SER_CMD 0x00000140 +#define R_SER_TX_RD_THRSH 0x00000160 +#define R_SER_TX_WR_THRSH 0x00000168 +#define R_SER_RX_RD_THRSH 0x00000170 +#define R_SER_LINE_MODE 0x00000178 +#define R_SER_DMA_ENABLE 0x00000180 +#define R_SER_INT_MASK 0x00000190 +#define R_SER_STATUS 0x00000188 +#define R_SER_STATUS_DEBUG 0x000001A8 +#define R_SER_RX_TABLE_BASE 0x00000200 +#define SER_RX_TABLE_COUNT 16 +#define R_SER_TX_TABLE_BASE 0x00000300 +#define SER_TX_TABLE_COUNT 16 + +/* RMON Counters */ +#define R_SER_RMON_TX_BYTE_LO 0x000001C0 +#define R_SER_RMON_TX_BYTE_HI 0x000001C8 +#define R_SER_RMON_RX_BYTE_LO 0x000001D0 +#define R_SER_RMON_RX_BYTE_HI 0x000001D8 +#define R_SER_RMON_TX_UNDERRUN 0x000001E0 +#define R_SER_RMON_RX_OVERFLOW 0x000001E8 +#define R_SER_RMON_RX_ERRORS 0x000001F0 +#define R_SER_RMON_RX_BADADDR 0x000001F8 + +#endif /* 1250/112x */ + +/* ********************************************************************* + * Generic Bus Registers + ********************************************************************* */ + +#define IO_EXT_CFG_COUNT 8 + +#define A_IO_EXT_BASE 0x0010061000 +#define A_IO_EXT_REG(r) (A_IO_EXT_BASE + (r)) + +#define A_IO_EXT_CFG_BASE 0x0010061000 +#define A_IO_EXT_MULT_SIZE_BASE 0x0010061100 +#define A_IO_EXT_START_ADDR_BASE 0x0010061200 +#define A_IO_EXT_TIME_CFG0_BASE 0x0010061600 +#define A_IO_EXT_TIME_CFG1_BASE 0x0010061700 + +#define IO_EXT_REGISTER_SPACING 8 +#define A_IO_EXT_CS_BASE(cs) (A_IO_EXT_CFG_BASE+IO_EXT_REGISTER_SPACING*(cs)) +#define R_IO_EXT_REG(reg, cs) ((cs)*IO_EXT_REGISTER_SPACING + (reg)) + +#define R_IO_EXT_CFG 0x0000 +#define R_IO_EXT_MULT_SIZE 0x0100 +#define R_IO_EXT_START_ADDR 0x0200 +#define R_IO_EXT_TIME_CFG0 0x0600 +#define R_IO_EXT_TIME_CFG1 0x0700 + + +#define A_IO_INTERRUPT_STATUS 0x0010061A00 +#define A_IO_INTERRUPT_DATA0 0x0010061A10 +#define A_IO_INTERRUPT_DATA1 0x0010061A18 +#define A_IO_INTERRUPT_DATA2 0x0010061A20 +#define A_IO_INTERRUPT_DATA3 0x0010061A28 +#define A_IO_INTERRUPT_ADDR0 0x0010061A30 +#define A_IO_INTERRUPT_ADDR1 0x0010061A40 +#define A_IO_INTERRUPT_PARITY 0x0010061A50 +#define A_IO_PCMCIA_CFG 0x0010061A60 +#define A_IO_PCMCIA_STATUS 0x0010061A70 +#define A_IO_DRIVE_0 0x0010061300 +#define A_IO_DRIVE_1 0x0010061308 +#define A_IO_DRIVE_2 0x0010061310 +#define A_IO_DRIVE_3 0x0010061318 +#define A_IO_DRIVE_BASE A_IO_DRIVE_0 +#define IO_DRIVE_REGISTER_SPACING 8 +#define R_IO_DRIVE(x) ((x)*IO_DRIVE_REGISTER_SPACING) +#define A_IO_DRIVE(x) (A_IO_DRIVE_BASE + R_IO_DRIVE(x)) + +#define R_IO_INTERRUPT_STATUS 0x0A00 +#define R_IO_INTERRUPT_DATA0 0x0A10 +#define R_IO_INTERRUPT_DATA1 0x0A18 +#define R_IO_INTERRUPT_DATA2 0x0A20 +#define R_IO_INTERRUPT_DATA3 0x0A28 +#define R_IO_INTERRUPT_ADDR0 0x0A30 +#define R_IO_INTERRUPT_ADDR1 0x0A40 +#define R_IO_INTERRUPT_PARITY 0x0A50 +#define R_IO_PCMCIA_CFG 0x0A60 +#define R_IO_PCMCIA_STATUS 0x0A70 + +/* ********************************************************************* + * GPIO Registers + ********************************************************************* */ + +#define A_GPIO_CLR_EDGE 0x0010061A80 +#define A_GPIO_INT_TYPE 0x0010061A88 +#define A_GPIO_INPUT_INVERT 0x0010061A90 +#define A_GPIO_GLITCH 0x0010061A98 +#define A_GPIO_READ 0x0010061AA0 +#define A_GPIO_DIRECTION 0x0010061AA8 +#define A_GPIO_PIN_CLR 0x0010061AB0 +#define A_GPIO_PIN_SET 0x0010061AB8 + +#define A_GPIO_BASE 0x0010061A80 + +#define R_GPIO_CLR_EDGE 0x00 +#define R_GPIO_INT_TYPE 0x08 +#define R_GPIO_INPUT_INVERT 0x10 +#define R_GPIO_GLITCH 0x18 +#define R_GPIO_READ 0x20 +#define R_GPIO_DIRECTION 0x28 +#define R_GPIO_PIN_CLR 0x30 +#define R_GPIO_PIN_SET 0x38 + +/* ********************************************************************* + * SMBus Registers + ********************************************************************* */ + +#define A_SMB_XTRA_0 0x0010060000 +#define A_SMB_XTRA_1 0x0010060008 +#define A_SMB_FREQ_0 0x0010060010 +#define A_SMB_FREQ_1 0x0010060018 +#define A_SMB_STATUS_0 0x0010060020 +#define A_SMB_STATUS_1 0x0010060028 +#define A_SMB_CMD_0 0x0010060030 +#define A_SMB_CMD_1 0x0010060038 +#define A_SMB_START_0 0x0010060040 +#define A_SMB_START_1 0x0010060048 +#define A_SMB_DATA_0 0x0010060050 +#define A_SMB_DATA_1 0x0010060058 +#define A_SMB_CONTROL_0 0x0010060060 +#define A_SMB_CONTROL_1 0x0010060068 +#define A_SMB_PEC_0 0x0010060070 +#define A_SMB_PEC_1 0x0010060078 + +#define A_SMB_0 0x0010060000 +#define A_SMB_1 0x0010060008 +#define SMB_REGISTER_SPACING 0x8 +#define A_SMB_BASE(idx) (A_SMB_0+(idx)*SMB_REGISTER_SPACING) +#define A_SMB_REGISTER(idx, reg) (A_SMB_BASE(idx)+(reg)) + +#define R_SMB_XTRA 0x0000000000 +#define R_SMB_FREQ 0x0000000010 +#define R_SMB_STATUS 0x0000000020 +#define R_SMB_CMD 0x0000000030 +#define R_SMB_START 0x0000000040 +#define R_SMB_DATA 0x0000000050 +#define R_SMB_CONTROL 0x0000000060 +#define R_SMB_PEC 0x0000000070 + +/* ********************************************************************* + * Timer Registers + ********************************************************************* */ + +/* + * Watchdog timers + */ + +#define A_SCD_WDOG_0 0x0010020050 +#define A_SCD_WDOG_1 0x0010020150 +#define SCD_WDOG_SPACING 0x100 +#define SCD_NUM_WDOGS 2 +#define A_SCD_WDOG_BASE(w) (A_SCD_WDOG_0+SCD_WDOG_SPACING*(w)) +#define A_SCD_WDOG_REGISTER(w, r) (A_SCD_WDOG_BASE(w) + (r)) + +#define R_SCD_WDOG_INIT 0x0000000000 +#define R_SCD_WDOG_CNT 0x0000000008 +#define R_SCD_WDOG_CFG 0x0000000010 + +#define A_SCD_WDOG_INIT_0 0x0010020050 +#define A_SCD_WDOG_CNT_0 0x0010020058 +#define A_SCD_WDOG_CFG_0 0x0010020060 + +#define A_SCD_WDOG_INIT_1 0x0010020150 +#define A_SCD_WDOG_CNT_1 0x0010020158 +#define A_SCD_WDOG_CFG_1 0x0010020160 + +/* + * Generic timers + */ + +#define A_SCD_TIMER_0 0x0010020070 +#define A_SCD_TIMER_1 0x0010020078 +#define A_SCD_TIMER_2 0x0010020170 +#define A_SCD_TIMER_3 0x0010020178 +#define SCD_NUM_TIMERS 4 +#define A_SCD_TIMER_BASE(w) (A_SCD_TIMER_0+0x08*((w)&1)+0x100*(((w)&2)>>1)) +#define A_SCD_TIMER_REGISTER(w, r) (A_SCD_TIMER_BASE(w) + (r)) + +#define R_SCD_TIMER_INIT 0x0000000000 +#define R_SCD_TIMER_CNT 0x0000000010 +#define R_SCD_TIMER_CFG 0x0000000020 + +#define A_SCD_TIMER_INIT_0 0x0010020070 +#define A_SCD_TIMER_CNT_0 0x0010020080 +#define A_SCD_TIMER_CFG_0 0x0010020090 + +#define A_SCD_TIMER_INIT_1 0x0010020078 +#define A_SCD_TIMER_CNT_1 0x0010020088 +#define A_SCD_TIMER_CFG_1 0x0010020098 + +#define A_SCD_TIMER_INIT_2 0x0010020170 +#define A_SCD_TIMER_CNT_2 0x0010020180 +#define A_SCD_TIMER_CFG_2 0x0010020190 + +#define A_SCD_TIMER_INIT_3 0x0010020178 +#define A_SCD_TIMER_CNT_3 0x0010020188 +#define A_SCD_TIMER_CFG_3 0x0010020198 + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define A_SCD_SCRATCH 0x0010020C10 +#endif /* 1250 PASS2 || 112x PASS1 */ + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define A_SCD_ZBBUS_CYCLE_COUNT 0x0010030000 +#define A_SCD_ZBBUS_CYCLE_CP0 0x0010020C00 +#define A_SCD_ZBBUS_CYCLE_CP1 0x0010020C08 +#endif + +/* ********************************************************************* + * System Control Registers + ********************************************************************* */ + +#define A_SCD_SYSTEM_REVISION 0x0010020000 +#define A_SCD_SYSTEM_CFG 0x0010020008 +#define A_SCD_SYSTEM_MANUF 0x0010038000 + +/* ********************************************************************* + * System Address Trap Registers + ********************************************************************* */ + +#define A_ADDR_TRAP_INDEX 0x00100200B0 +#define A_ADDR_TRAP_REG 0x00100200B8 +#define A_ADDR_TRAP_UP_0 0x0010020400 +#define A_ADDR_TRAP_UP_1 0x0010020408 +#define A_ADDR_TRAP_UP_2 0x0010020410 +#define A_ADDR_TRAP_UP_3 0x0010020418 +#define A_ADDR_TRAP_DOWN_0 0x0010020420 +#define A_ADDR_TRAP_DOWN_1 0x0010020428 +#define A_ADDR_TRAP_DOWN_2 0x0010020430 +#define A_ADDR_TRAP_DOWN_3 0x0010020438 +#define A_ADDR_TRAP_CFG_0 0x0010020440 +#define A_ADDR_TRAP_CFG_1 0x0010020448 +#define A_ADDR_TRAP_CFG_2 0x0010020450 +#define A_ADDR_TRAP_CFG_3 0x0010020458 +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define A_ADDR_TRAP_REG_DEBUG 0x0010020460 +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#define ADDR_TRAP_SPACING 8 +#define NUM_ADDR_TRAP 4 +#define A_ADDR_TRAP_UP(n) (A_ADDR_TRAP_UP_0 + ((n) * ADDR_TRAP_SPACING)) +#define A_ADDR_TRAP_DOWN(n) (A_ADDR_TRAP_DOWN_0 + ((n) * ADDR_TRAP_SPACING)) +#define A_ADDR_TRAP_CFG(n) (A_ADDR_TRAP_CFG_0 + ((n) * ADDR_TRAP_SPACING)) + + +/* ********************************************************************* + * System Interrupt Mapper Registers + ********************************************************************* */ + +#define A_IMR_CPU0_BASE 0x0010020000 +#define A_IMR_CPU1_BASE 0x0010022000 +#define IMR_REGISTER_SPACING 0x2000 +#define IMR_REGISTER_SPACING_SHIFT 13 + +#define A_IMR_MAPPER(cpu) (A_IMR_CPU0_BASE+(cpu)*IMR_REGISTER_SPACING) +#define A_IMR_REGISTER(cpu, reg) (A_IMR_MAPPER(cpu)+(reg)) + +#define R_IMR_INTERRUPT_DIAG 0x0010 +#define R_IMR_INTERRUPT_LDT 0x0018 +#define R_IMR_INTERRUPT_MASK 0x0028 +#define R_IMR_INTERRUPT_TRACE 0x0038 +#define R_IMR_INTERRUPT_SOURCE_STATUS 0x0040 +#define R_IMR_LDT_INTERRUPT_SET 0x0048 +#define R_IMR_LDT_INTERRUPT 0x0018 +#define R_IMR_LDT_INTERRUPT_CLR 0x0020 +#define R_IMR_MAILBOX_CPU 0x00c0 +#define R_IMR_ALIAS_MAILBOX_CPU 0x1000 +#define R_IMR_MAILBOX_SET_CPU 0x00C8 +#define R_IMR_ALIAS_MAILBOX_SET_CPU 0x1008 +#define R_IMR_MAILBOX_CLR_CPU 0x00D0 +#define R_IMR_INTERRUPT_STATUS_BASE 0x0100 +#define R_IMR_INTERRUPT_STATUS_COUNT 7 +#define R_IMR_INTERRUPT_MAP_BASE 0x0200 +#define R_IMR_INTERRUPT_MAP_COUNT 64 + +/* + * these macros work together to build the address of a mailbox + * register, e.g., A_MAILBOX_REGISTER(R_IMR_MAILBOX_SET_CPU,1) + * for mbox_0_set_cpu2 returns 0x00100240C8 + */ +#define A_MAILBOX_REGISTER(reg,cpu) \ + (A_IMR_CPU0_BASE + (cpu * IMR_REGISTER_SPACING) + reg) + +/* ********************************************************************* + * System Performance Counter Registers + ********************************************************************* */ + +#define A_SCD_PERF_CNT_CFG 0x00100204C0 +#define A_SCD_PERF_CNT_0 0x00100204D0 +#define A_SCD_PERF_CNT_1 0x00100204D8 +#define A_SCD_PERF_CNT_2 0x00100204E0 +#define A_SCD_PERF_CNT_3 0x00100204E8 + +#define SCD_NUM_PERF_CNT 4 +#define SCD_PERF_CNT_SPACING 8 +#define A_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*SCD_PERF_CNT_SPACING)) + +/* ********************************************************************* + * System Bus Watcher Registers + ********************************************************************* */ + +#define A_SCD_BUS_ERR_STATUS 0x0010020880 +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define A_SCD_BUS_ERR_STATUS_DEBUG 0x00100208D0 +#define A_BUS_ERR_STATUS_DEBUG 0x00100208D0 +#endif /* 1250 PASS2 || 112x PASS1 */ +#define A_BUS_ERR_DATA_0 0x00100208A0 +#define A_BUS_ERR_DATA_1 0x00100208A8 +#define A_BUS_ERR_DATA_2 0x00100208B0 +#define A_BUS_ERR_DATA_3 0x00100208B8 +#define A_BUS_L2_ERRORS 0x00100208C0 +#define A_BUS_MEM_IO_ERRORS 0x00100208C8 + +/* ********************************************************************* + * System Debug Controller Registers + ********************************************************************* */ + +#define A_SCD_JTAG_BASE 0x0010000000 + +/* ********************************************************************* + * System Trace Buffer Registers + ********************************************************************* */ + +#define A_SCD_TRACE_CFG 0x0010020A00 +#define A_SCD_TRACE_READ 0x0010020A08 +#define A_SCD_TRACE_EVENT_0 0x0010020A20 +#define A_SCD_TRACE_EVENT_1 0x0010020A28 +#define A_SCD_TRACE_EVENT_2 0x0010020A30 +#define A_SCD_TRACE_EVENT_3 0x0010020A38 +#define A_SCD_TRACE_SEQUENCE_0 0x0010020A40 +#define A_SCD_TRACE_SEQUENCE_1 0x0010020A48 +#define A_SCD_TRACE_SEQUENCE_2 0x0010020A50 +#define A_SCD_TRACE_SEQUENCE_3 0x0010020A58 +#define A_SCD_TRACE_EVENT_4 0x0010020A60 +#define A_SCD_TRACE_EVENT_5 0x0010020A68 +#define A_SCD_TRACE_EVENT_6 0x0010020A70 +#define A_SCD_TRACE_EVENT_7 0x0010020A78 +#define A_SCD_TRACE_SEQUENCE_4 0x0010020A80 +#define A_SCD_TRACE_SEQUENCE_5 0x0010020A88 +#define A_SCD_TRACE_SEQUENCE_6 0x0010020A90 +#define A_SCD_TRACE_SEQUENCE_7 0x0010020A98 + +#define TRACE_REGISTER_SPACING 8 +#define TRACE_NUM_REGISTERS 8 +#define A_SCD_TRACE_EVENT(n) (((n) & 4) ? \ + (A_SCD_TRACE_EVENT_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \ + (A_SCD_TRACE_EVENT_0 + ((n) * TRACE_REGISTER_SPACING))) +#define A_SCD_TRACE_SEQUENCE(n) (((n) & 4) ? \ + (A_SCD_TRACE_SEQUENCE_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \ + (A_SCD_TRACE_SEQUENCE_0 + ((n) * TRACE_REGISTER_SPACING))) + +/* ********************************************************************* + * System Generic DMA Registers + ********************************************************************* */ + +#define A_DM_0 0x0010020B00 +#define A_DM_1 0x0010020B20 +#define A_DM_2 0x0010020B40 +#define A_DM_3 0x0010020B60 +#define DM_REGISTER_SPACING 0x20 +#define DM_NUM_CHANNELS 4 +#define A_DM_BASE(idx) (A_DM_0 + ((idx) * DM_REGISTER_SPACING)) +#define A_DM_REGISTER(idx, reg) (A_DM_BASE(idx) + (reg)) + +#define R_DM_DSCR_BASE 0x0000000000 +#define R_DM_DSCR_COUNT 0x0000000008 +#define R_DM_CUR_DSCR_ADDR 0x0000000010 +#define R_DM_DSCR_BASE_DEBUG 0x0000000018 + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define A_DM_PARTIAL_0 0x0010020ba0 +#define A_DM_PARTIAL_1 0x0010020ba8 +#define A_DM_PARTIAL_2 0x0010020bb0 +#define A_DM_PARTIAL_3 0x0010020bb8 +#define DM_PARTIAL_REGISTER_SPACING 0x8 +#define A_DM_PARTIAL(idx) (A_DM_PARTIAL_0 + ((idx) * DM_PARTIAL_REGISTER_SPACING)) +#endif /* 1250 PASS3 || 112x PASS1 */ + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define A_DM_CRC_0 0x0010020b80 +#define A_DM_CRC_1 0x0010020b90 +#define DM_CRC_REGISTER_SPACING 0x10 +#define DM_CRC_NUM_CHANNELS 2 +#define A_DM_CRC_BASE(idx) (A_DM_CRC_0 + ((idx) * DM_CRC_REGISTER_SPACING)) +#define A_DM_CRC_REGISTER(idx, reg) (A_DM_CRC_BASE(idx) + (reg)) + +#define R_CRC_DEF_0 0x00 +#define R_CTCP_DEF_0 0x08 +#endif /* 1250 PASS3 || 112x PASS1 */ + +/* ********************************************************************* + * Physical Address Map + ********************************************************************* */ + +#if SIBYTE_HDR_FEATURE_1250_112x +#define A_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000) +#define A_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024)) +#define A_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000) +#define A_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000) +#define A_PHYS_GENBUS _SB_MAKE64(0x0010090000) +#define A_PHYS_GENBUS_END _SB_MAKE64(0x0040000000) +#define A_PHYS_LDTPCI_IO_MATCH_BYTES_32 _SB_MAKE64(0x0040000000) +#define A_PHYS_LDTPCI_IO_MATCH_BITS_32 _SB_MAKE64(0x0060000000) +#define A_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000) +#define A_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000) +#define A_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000) +#define A_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000) +#define A_PHYS_LDT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000) +#define A_PHYS_LDTPCI_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000) +#define A_PHYS_LDTPCI_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000) +#define A_PHYS_LDT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000) +#define A_PHYS_LDTPCI_IO_MATCH_BITS _SB_MAKE64(0x00FC000000) +#define A_PHYS_LDTPCI_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000) +#define A_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000) +#define A_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024)) +#define A_PHYS_LDT_EXP _SB_MAKE64(0x8000000000) +#define A_PHYS_PCI_FULLACCESS_BYTES _SB_MAKE64(0xF000000000) +#define A_PHYS_PCI_FULLACCESS_BITS _SB_MAKE64(0xF100000000) +#define A_PHYS_RESERVED _SB_MAKE64(0xF200000000) +#define A_PHYS_RESERVED_SPECIAL_LDT _SB_MAKE64(0xFD00000000) + +#define A_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000) +#define PHYS_L2CACHE_NUM_WAYS 4 +#define A_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000080000) +#define A_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0180000) +#define A_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D01A0000) +#define A_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D01C0000) +#define A_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D01E0000) +#endif + + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_scd.h b/arch/mips/include/asm/sibyte/sb1250_scd.h new file mode 100644 index 000000000000..e49c3e89b5ee --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_scd.h @@ -0,0 +1,654 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * SCD Constants and Macros File: sb1250_scd.h + * + * This module contains constants and macros useful for + * manipulating the System Control and Debug module on the 1250. + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003,2004,2005 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + +#ifndef _SB1250_SCD_H +#define _SB1250_SCD_H + +#include "sb1250_defs.h" + +/* ********************************************************************* + * System control/debug registers + ********************************************************************* */ + +/* + * System Revision Register (Table 4-1) + */ + +#define M_SYS_RESERVED _SB_MAKEMASK(8, 0) + +#define S_SYS_REVISION _SB_MAKE64(8) +#define M_SYS_REVISION _SB_MAKEMASK(8, S_SYS_REVISION) +#define V_SYS_REVISION(x) _SB_MAKEVALUE(x, S_SYS_REVISION) +#define G_SYS_REVISION(x) _SB_GETVALUE(x, S_SYS_REVISION, M_SYS_REVISION) + +#define K_SYS_REVISION_BCM1250_PASS1 0x01 + +#define K_SYS_REVISION_BCM1250_PASS2 0x03 +#define K_SYS_REVISION_BCM1250_A1 0x03 /* Pass 2.0 WB */ +#define K_SYS_REVISION_BCM1250_A2 0x04 /* Pass 2.0 FC */ +#define K_SYS_REVISION_BCM1250_A3 0x05 /* Pass 2.1 FC */ +#define K_SYS_REVISION_BCM1250_A4 0x06 /* Pass 2.1 WB */ +#define K_SYS_REVISION_BCM1250_A6 0x07 /* OR 0x04 (A2) w/WID != 0 */ +#define K_SYS_REVISION_BCM1250_A8 0x0b /* A8/A10 */ +#define K_SYS_REVISION_BCM1250_A9 0x08 +#define K_SYS_REVISION_BCM1250_A10 K_SYS_REVISION_BCM1250_A8 + +#define K_SYS_REVISION_BCM1250_PASS2_2 0x10 +#define K_SYS_REVISION_BCM1250_B0 K_SYS_REVISION_BCM1250_B1 +#define K_SYS_REVISION_BCM1250_B1 0x10 +#define K_SYS_REVISION_BCM1250_B2 0x11 + +#define K_SYS_REVISION_BCM1250_C0 0x20 +#define K_SYS_REVISION_BCM1250_C1 0x21 +#define K_SYS_REVISION_BCM1250_C2 0x22 +#define K_SYS_REVISION_BCM1250_C3 0x23 + +#if SIBYTE_HDR_FEATURE_CHIP(1250) +/* XXX: discourage people from using these constants. */ +#define K_SYS_REVISION_PASS1 K_SYS_REVISION_BCM1250_PASS1 +#define K_SYS_REVISION_PASS2 K_SYS_REVISION_BCM1250_PASS2 +#define K_SYS_REVISION_PASS2_2 K_SYS_REVISION_BCM1250_PASS2_2 +#define K_SYS_REVISION_PASS3 K_SYS_REVISION_BCM1250_PASS3 +#define K_SYS_REVISION_BCM1250_PASS3 K_SYS_REVISION_BCM1250_C0 +#endif /* 1250 */ + +#define K_SYS_REVISION_BCM112x_A1 0x20 +#define K_SYS_REVISION_BCM112x_A2 0x21 +#define K_SYS_REVISION_BCM112x_A3 0x22 +#define K_SYS_REVISION_BCM112x_A4 0x23 +#define K_SYS_REVISION_BCM112x_B0 0x30 + +#define K_SYS_REVISION_BCM1480_S0 0x01 +#define K_SYS_REVISION_BCM1480_A1 0x02 +#define K_SYS_REVISION_BCM1480_A2 0x03 +#define K_SYS_REVISION_BCM1480_A3 0x04 +#define K_SYS_REVISION_BCM1480_B0 0x11 + +/*Cache size - 23:20 of revision register*/ +#define S_SYS_L2C_SIZE _SB_MAKE64(20) +#define M_SYS_L2C_SIZE _SB_MAKEMASK(4, S_SYS_L2C_SIZE) +#define V_SYS_L2C_SIZE(x) _SB_MAKEVALUE(x, S_SYS_L2C_SIZE) +#define G_SYS_L2C_SIZE(x) _SB_GETVALUE(x, S_SYS_L2C_SIZE, M_SYS_L2C_SIZE) + +#define K_SYS_L2C_SIZE_1MB 0 +#define K_SYS_L2C_SIZE_512KB 5 +#define K_SYS_L2C_SIZE_256KB 2 +#define K_SYS_L2C_SIZE_128KB 1 + +#define K_SYS_L2C_SIZE_BCM1250 K_SYS_L2C_SIZE_512KB +#define K_SYS_L2C_SIZE_BCM1125 K_SYS_L2C_SIZE_256KB +#define K_SYS_L2C_SIZE_BCM1122 K_SYS_L2C_SIZE_128KB + + +/* Number of CPU cores, bits 27:24 of revision register*/ +#define S_SYS_NUM_CPUS _SB_MAKE64(24) +#define M_SYS_NUM_CPUS _SB_MAKEMASK(4, S_SYS_NUM_CPUS) +#define V_SYS_NUM_CPUS(x) _SB_MAKEVALUE(x, S_SYS_NUM_CPUS) +#define G_SYS_NUM_CPUS(x) _SB_GETVALUE(x, S_SYS_NUM_CPUS, M_SYS_NUM_CPUS) + + +/* XXX: discourage people from using these constants. */ +#define S_SYS_PART _SB_MAKE64(16) +#define M_SYS_PART _SB_MAKEMASK(16, S_SYS_PART) +#define V_SYS_PART(x) _SB_MAKEVALUE(x, S_SYS_PART) +#define G_SYS_PART(x) _SB_GETVALUE(x, S_SYS_PART, M_SYS_PART) + +/* XXX: discourage people from using these constants. */ +#define K_SYS_PART_SB1250 0x1250 +#define K_SYS_PART_BCM1120 0x1121 +#define K_SYS_PART_BCM1125 0x1123 +#define K_SYS_PART_BCM1125H 0x1124 +#define K_SYS_PART_BCM1122 0x1113 + + +/* The "peripheral set" (SOC type) is the low 4 bits of the "part" field. */ +#define S_SYS_SOC_TYPE _SB_MAKE64(16) +#define M_SYS_SOC_TYPE _SB_MAKEMASK(4, S_SYS_SOC_TYPE) +#define V_SYS_SOC_TYPE(x) _SB_MAKEVALUE(x, S_SYS_SOC_TYPE) +#define G_SYS_SOC_TYPE(x) _SB_GETVALUE(x, S_SYS_SOC_TYPE, M_SYS_SOC_TYPE) + +#define K_SYS_SOC_TYPE_BCM1250 0x0 +#define K_SYS_SOC_TYPE_BCM1120 0x1 +#define K_SYS_SOC_TYPE_BCM1250_ALT 0x2 /* 1250pass2 w/ 1/4 L2. */ +#define K_SYS_SOC_TYPE_BCM1125 0x3 +#define K_SYS_SOC_TYPE_BCM1125H 0x4 +#define K_SYS_SOC_TYPE_BCM1250_ALT2 0x5 /* 1250pass2 w/ 1/2 L2. */ +#define K_SYS_SOC_TYPE_BCM1x80 0x6 +#define K_SYS_SOC_TYPE_BCM1x55 0x7 + +/* + * Calculate correct SOC type given a copy of system revision register. + * + * (For the assembler version, sysrev and dest may be the same register. + * Also, it clobbers AT.) + */ +#ifdef __ASSEMBLER__ +#define SYS_SOC_TYPE(dest, sysrev) \ + .set push ; \ + .set reorder ; \ + dsrl dest, sysrev, S_SYS_SOC_TYPE ; \ + andi dest, dest, (M_SYS_SOC_TYPE >> S_SYS_SOC_TYPE); \ + beq dest, K_SYS_SOC_TYPE_BCM1250_ALT, 991f ; \ + beq dest, K_SYS_SOC_TYPE_BCM1250_ALT2, 991f ; \ + b 992f ; \ +991: li dest, K_SYS_SOC_TYPE_BCM1250 ; \ +992: \ + .set pop +#else +#define SYS_SOC_TYPE(sysrev) \ + ((G_SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250_ALT \ + || G_SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250_ALT2) \ + ? K_SYS_SOC_TYPE_BCM1250 : G_SYS_SOC_TYPE(sysrev)) +#endif + +#define S_SYS_WID _SB_MAKE64(32) +#define M_SYS_WID _SB_MAKEMASK(32, S_SYS_WID) +#define V_SYS_WID(x) _SB_MAKEVALUE(x, S_SYS_WID) +#define G_SYS_WID(x) _SB_GETVALUE(x, S_SYS_WID, M_SYS_WID) + +/* + * System Manufacturing Register + * Register: SCD_SYSTEM_MANUF + */ + +#if SIBYTE_HDR_FEATURE_1250_112x +/* Wafer ID: bits 31:0 */ +#define S_SYS_WAFERID1_200 _SB_MAKE64(0) +#define M_SYS_WAFERID1_200 _SB_MAKEMASK(32, S_SYS_WAFERID1_200) +#define V_SYS_WAFERID1_200(x) _SB_MAKEVALUE(x, S_SYS_WAFERID1_200) +#define G_SYS_WAFERID1_200(x) _SB_GETVALUE(x, S_SYS_WAFERID1_200, M_SYS_WAFERID1_200) + +#define S_SYS_BIN _SB_MAKE64(32) +#define M_SYS_BIN _SB_MAKEMASK(4, S_SYS_BIN) +#define V_SYS_BIN(x) _SB_MAKEVALUE(x, S_SYS_BIN) +#define G_SYS_BIN(x) _SB_GETVALUE(x, S_SYS_BIN, M_SYS_BIN) + +/* Wafer ID: bits 39:36 */ +#define S_SYS_WAFERID2_200 _SB_MAKE64(36) +#define M_SYS_WAFERID2_200 _SB_MAKEMASK(4, S_SYS_WAFERID2_200) +#define V_SYS_WAFERID2_200(x) _SB_MAKEVALUE(x, S_SYS_WAFERID2_200) +#define G_SYS_WAFERID2_200(x) _SB_GETVALUE(x, S_SYS_WAFERID2_200, M_SYS_WAFERID2_200) + +/* Wafer ID: bits 39:0 */ +#define S_SYS_WAFERID_300 _SB_MAKE64(0) +#define M_SYS_WAFERID_300 _SB_MAKEMASK(40, S_SYS_WAFERID_300) +#define V_SYS_WAFERID_300(x) _SB_MAKEVALUE(x, S_SYS_WAFERID_300) +#define G_SYS_WAFERID_300(x) _SB_GETVALUE(x, S_SYS_WAFERID_300, M_SYS_WAFERID_300) + +#define S_SYS_XPOS _SB_MAKE64(40) +#define M_SYS_XPOS _SB_MAKEMASK(6, S_SYS_XPOS) +#define V_SYS_XPOS(x) _SB_MAKEVALUE(x, S_SYS_XPOS) +#define G_SYS_XPOS(x) _SB_GETVALUE(x, S_SYS_XPOS, M_SYS_XPOS) + +#define S_SYS_YPOS _SB_MAKE64(46) +#define M_SYS_YPOS _SB_MAKEMASK(6, S_SYS_YPOS) +#define V_SYS_YPOS(x) _SB_MAKEVALUE(x, S_SYS_YPOS) +#define G_SYS_YPOS(x) _SB_GETVALUE(x, S_SYS_YPOS, M_SYS_YPOS) +#endif + + +/* + * System Config Register (Table 4-2) + * Register: SCD_SYSTEM_CFG + */ + +#if SIBYTE_HDR_FEATURE_1250_112x +#define M_SYS_LDT_PLL_BYP _SB_MAKEMASK1(3) +#define M_SYS_PCI_SYNC_TEST_MODE _SB_MAKEMASK1(4) +#define M_SYS_IOB0_DIV _SB_MAKEMASK1(5) +#define M_SYS_IOB1_DIV _SB_MAKEMASK1(6) + +#define S_SYS_PLL_DIV _SB_MAKE64(7) +#define M_SYS_PLL_DIV _SB_MAKEMASK(5, S_SYS_PLL_DIV) +#define V_SYS_PLL_DIV(x) _SB_MAKEVALUE(x, S_SYS_PLL_DIV) +#define G_SYS_PLL_DIV(x) _SB_GETVALUE(x, S_SYS_PLL_DIV, M_SYS_PLL_DIV) + +#define M_SYS_SER0_ENABLE _SB_MAKEMASK1(12) +#define M_SYS_SER0_RSTB_EN _SB_MAKEMASK1(13) +#define M_SYS_SER1_ENABLE _SB_MAKEMASK1(14) +#define M_SYS_SER1_RSTB_EN _SB_MAKEMASK1(15) +#define M_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16) + +#define S_SYS_BOOT_MODE _SB_MAKE64(17) +#define M_SYS_BOOT_MODE _SB_MAKEMASK(2, S_SYS_BOOT_MODE) +#define V_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x, S_SYS_BOOT_MODE) +#define G_SYS_BOOT_MODE(x) _SB_GETVALUE(x, S_SYS_BOOT_MODE, M_SYS_BOOT_MODE) +#define K_SYS_BOOT_MODE_ROM32 0 +#define K_SYS_BOOT_MODE_ROM8 1 +#define K_SYS_BOOT_MODE_SMBUS_SMALL 2 +#define K_SYS_BOOT_MODE_SMBUS_BIG 3 + +#define M_SYS_PCI_HOST _SB_MAKEMASK1(19) +#define M_SYS_PCI_ARBITER _SB_MAKEMASK1(20) +#define M_SYS_SOUTH_ON_LDT _SB_MAKEMASK1(21) +#define M_SYS_BIG_ENDIAN _SB_MAKEMASK1(22) +#define M_SYS_GENCLK_EN _SB_MAKEMASK1(23) +#define M_SYS_LDT_TEST_EN _SB_MAKEMASK1(24) +#define M_SYS_GEN_PARITY_EN _SB_MAKEMASK1(25) + +#define S_SYS_CONFIG 26 +#define M_SYS_CONFIG _SB_MAKEMASK(6, S_SYS_CONFIG) +#define V_SYS_CONFIG(x) _SB_MAKEVALUE(x, S_SYS_CONFIG) +#define G_SYS_CONFIG(x) _SB_GETVALUE(x, S_SYS_CONFIG, M_SYS_CONFIG) + +/* The following bits are writeable by JTAG only. */ + +#define M_SYS_CLKSTOP _SB_MAKEMASK1(32) +#define M_SYS_CLKSTEP _SB_MAKEMASK1(33) + +#define S_SYS_CLKCOUNT 34 +#define M_SYS_CLKCOUNT _SB_MAKEMASK(8, S_SYS_CLKCOUNT) +#define V_SYS_CLKCOUNT(x) _SB_MAKEVALUE(x, S_SYS_CLKCOUNT) +#define G_SYS_CLKCOUNT(x) _SB_GETVALUE(x, S_SYS_CLKCOUNT, M_SYS_CLKCOUNT) + +#define M_SYS_PLL_BYPASS _SB_MAKEMASK1(42) + +#define S_SYS_PLL_IREF 43 +#define M_SYS_PLL_IREF _SB_MAKEMASK(2, S_SYS_PLL_IREF) + +#define S_SYS_PLL_VCO 45 +#define M_SYS_PLL_VCO _SB_MAKEMASK(2, S_SYS_PLL_VCO) + +#define S_SYS_PLL_VREG 47 +#define M_SYS_PLL_VREG _SB_MAKEMASK(2, S_SYS_PLL_VREG) + +#define M_SYS_MEM_RESET _SB_MAKEMASK1(49) +#define M_SYS_L2C_RESET _SB_MAKEMASK1(50) +#define M_SYS_IO_RESET_0 _SB_MAKEMASK1(51) +#define M_SYS_IO_RESET_1 _SB_MAKEMASK1(52) +#define M_SYS_SCD_RESET _SB_MAKEMASK1(53) + +/* End of bits writable by JTAG only. */ + +#define M_SYS_CPU_RESET_0 _SB_MAKEMASK1(54) +#define M_SYS_CPU_RESET_1 _SB_MAKEMASK1(55) + +#define M_SYS_UNICPU0 _SB_MAKEMASK1(56) +#define M_SYS_UNICPU1 _SB_MAKEMASK1(57) + +#define M_SYS_SB_SOFTRES _SB_MAKEMASK1(58) +#define M_SYS_EXT_RESET _SB_MAKEMASK1(59) +#define M_SYS_SYSTEM_RESET _SB_MAKEMASK1(60) + +#define M_SYS_MISR_MODE _SB_MAKEMASK1(61) +#define M_SYS_MISR_RESET _SB_MAKEMASK1(62) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define M_SYS_SW_FLAG _SB_MAKEMASK1(63) +#endif /* 1250 PASS2 || 112x PASS1 */ + +#endif + + +/* + * Mailbox Registers (Table 4-3) + * Registers: SCD_MBOX_CPU_x + */ + +#define S_MBOX_INT_3 0 +#define M_MBOX_INT_3 _SB_MAKEMASK(16, S_MBOX_INT_3) +#define S_MBOX_INT_2 16 +#define M_MBOX_INT_2 _SB_MAKEMASK(16, S_MBOX_INT_2) +#define S_MBOX_INT_1 32 +#define M_MBOX_INT_1 _SB_MAKEMASK(16, S_MBOX_INT_1) +#define S_MBOX_INT_0 48 +#define M_MBOX_INT_0 _SB_MAKEMASK(16, S_MBOX_INT_0) + +/* + * Watchdog Registers (Table 4-8) (Table 4-9) (Table 4-10) + * Registers: SCD_WDOG_INIT_CNT_x + */ + +#define V_SCD_WDOG_FREQ 1000000 + +#define S_SCD_WDOG_INIT 0 +#define M_SCD_WDOG_INIT _SB_MAKEMASK(23, S_SCD_WDOG_INIT) + +#define S_SCD_WDOG_CNT 0 +#define M_SCD_WDOG_CNT _SB_MAKEMASK(23, S_SCD_WDOG_CNT) + +#define S_SCD_WDOG_ENABLE 0 +#define M_SCD_WDOG_ENABLE _SB_MAKEMASK1(S_SCD_WDOG_ENABLE) + +#define S_SCD_WDOG_RESET_TYPE 2 +#define M_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(3, S_SCD_WDOG_RESET_TYPE) +#define V_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x, S_SCD_WDOG_RESET_TYPE) +#define G_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x, S_SCD_WDOG_RESET_TYPE, M_SCD_WDOG_RESET_TYPE) + +#define K_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */ +#define K_SCD_WDOG_RESET_SOFT 1 +#define K_SCD_WDOG_RESET_CPU0 3 +#define K_SCD_WDOG_RESET_CPU1 5 +#define K_SCD_WDOG_RESET_BOTH_CPUS 7 + +/* This feature is present in 1250 C0 and later, but *not* in 112x A revs. */ +#if SIBYTE_HDR_FEATURE(1250, PASS3) +#define S_SCD_WDOG_HAS_RESET 8 +#define M_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(S_SCD_WDOG_HAS_RESET) +#endif + + +/* + * Timer Registers (Table 4-11) (Table 4-12) (Table 4-13) + */ + +#define V_SCD_TIMER_FREQ 1000000 + +#define S_SCD_TIMER_INIT 0 +#define M_SCD_TIMER_INIT _SB_MAKEMASK(23, S_SCD_TIMER_INIT) +#define V_SCD_TIMER_INIT(x) _SB_MAKEVALUE(x, S_SCD_TIMER_INIT) +#define G_SCD_TIMER_INIT(x) _SB_GETVALUE(x, S_SCD_TIMER_INIT, M_SCD_TIMER_INIT) + +#define V_SCD_TIMER_WIDTH 23 +#define S_SCD_TIMER_CNT 0 +#define M_SCD_TIMER_CNT _SB_MAKEMASK(V_SCD_TIMER_WIDTH, S_SCD_TIMER_CNT) +#define V_SCD_TIMER_CNT(x) _SB_MAKEVALUE(x, S_SCD_TIMER_CNT) +#define G_SCD_TIMER_CNT(x) _SB_GETVALUE(x, S_SCD_TIMER_CNT, M_SCD_TIMER_CNT) + +#define M_SCD_TIMER_ENABLE _SB_MAKEMASK1(0) +#define M_SCD_TIMER_MODE _SB_MAKEMASK1(1) +#define M_SCD_TIMER_MODE_CONTINUOUS M_SCD_TIMER_MODE + +/* + * System Performance Counters + */ + +#define S_SPC_CFG_SRC0 0 +#define M_SPC_CFG_SRC0 _SB_MAKEMASK(8, S_SPC_CFG_SRC0) +#define V_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC0) +#define G_SPC_CFG_SRC0(x) _SB_GETVALUE(x, S_SPC_CFG_SRC0, M_SPC_CFG_SRC0) + +#define S_SPC_CFG_SRC1 8 +#define M_SPC_CFG_SRC1 _SB_MAKEMASK(8, S_SPC_CFG_SRC1) +#define V_SPC_CFG_SRC1(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC1) +#define G_SPC_CFG_SRC1(x) _SB_GETVALUE(x, S_SPC_CFG_SRC1, M_SPC_CFG_SRC1) + +#define S_SPC_CFG_SRC2 16 +#define M_SPC_CFG_SRC2 _SB_MAKEMASK(8, S_SPC_CFG_SRC2) +#define V_SPC_CFG_SRC2(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC2) +#define G_SPC_CFG_SRC2(x) _SB_GETVALUE(x, S_SPC_CFG_SRC2, M_SPC_CFG_SRC2) + +#define S_SPC_CFG_SRC3 24 +#define M_SPC_CFG_SRC3 _SB_MAKEMASK(8, S_SPC_CFG_SRC3) +#define V_SPC_CFG_SRC3(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC3) +#define G_SPC_CFG_SRC3(x) _SB_GETVALUE(x, S_SPC_CFG_SRC3, M_SPC_CFG_SRC3) + +#if SIBYTE_HDR_FEATURE_1250_112x +#define M_SPC_CFG_CLEAR _SB_MAKEMASK1(32) +#define M_SPC_CFG_ENABLE _SB_MAKEMASK1(33) +#endif + + +/* + * Bus Watcher + */ + +#define S_SCD_BERR_TID 8 +#define M_SCD_BERR_TID _SB_MAKEMASK(10, S_SCD_BERR_TID) +#define V_SCD_BERR_TID(x) _SB_MAKEVALUE(x, S_SCD_BERR_TID) +#define G_SCD_BERR_TID(x) _SB_GETVALUE(x, S_SCD_BERR_TID, M_SCD_BERR_TID) + +#define S_SCD_BERR_RID 18 +#define M_SCD_BERR_RID _SB_MAKEMASK(4, S_SCD_BERR_RID) +#define V_SCD_BERR_RID(x) _SB_MAKEVALUE(x, S_SCD_BERR_RID) +#define G_SCD_BERR_RID(x) _SB_GETVALUE(x, S_SCD_BERR_RID, M_SCD_BERR_RID) + +#define S_SCD_BERR_DCODE 22 +#define M_SCD_BERR_DCODE _SB_MAKEMASK(3, S_SCD_BERR_DCODE) +#define V_SCD_BERR_DCODE(x) _SB_MAKEVALUE(x, S_SCD_BERR_DCODE) +#define G_SCD_BERR_DCODE(x) _SB_GETVALUE(x, S_SCD_BERR_DCODE, M_SCD_BERR_DCODE) + +#define M_SCD_BERR_MULTERRS _SB_MAKEMASK1(30) + + +#define S_SCD_L2ECC_CORR_D 0 +#define M_SCD_L2ECC_CORR_D _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_D) +#define V_SCD_L2ECC_CORR_D(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_D) +#define G_SCD_L2ECC_CORR_D(x) _SB_GETVALUE(x, S_SCD_L2ECC_CORR_D, M_SCD_L2ECC_CORR_D) + +#define S_SCD_L2ECC_BAD_D 8 +#define M_SCD_L2ECC_BAD_D _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_D) +#define V_SCD_L2ECC_BAD_D(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_D) +#define G_SCD_L2ECC_BAD_D(x) _SB_GETVALUE(x, S_SCD_L2ECC_BAD_D, M_SCD_L2ECC_BAD_D) + +#define S_SCD_L2ECC_CORR_T 16 +#define M_SCD_L2ECC_CORR_T _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_T) +#define V_SCD_L2ECC_CORR_T(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_T) +#define G_SCD_L2ECC_CORR_T(x) _SB_GETVALUE(x, S_SCD_L2ECC_CORR_T, M_SCD_L2ECC_CORR_T) + +#define S_SCD_L2ECC_BAD_T 24 +#define M_SCD_L2ECC_BAD_T _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_T) +#define V_SCD_L2ECC_BAD_T(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_T) +#define G_SCD_L2ECC_BAD_T(x) _SB_GETVALUE(x, S_SCD_L2ECC_BAD_T, M_SCD_L2ECC_BAD_T) + +#define S_SCD_MEM_ECC_CORR 0 +#define M_SCD_MEM_ECC_CORR _SB_MAKEMASK(8, S_SCD_MEM_ECC_CORR) +#define V_SCD_MEM_ECC_CORR(x) _SB_MAKEVALUE(x, S_SCD_MEM_ECC_CORR) +#define G_SCD_MEM_ECC_CORR(x) _SB_GETVALUE(x, S_SCD_MEM_ECC_CORR, M_SCD_MEM_ECC_CORR) + +#define S_SCD_MEM_ECC_BAD 8 +#define M_SCD_MEM_ECC_BAD _SB_MAKEMASK(8, S_SCD_MEM_ECC_BAD) +#define V_SCD_MEM_ECC_BAD(x) _SB_MAKEVALUE(x, S_SCD_MEM_ECC_BAD) +#define G_SCD_MEM_ECC_BAD(x) _SB_GETVALUE(x, S_SCD_MEM_ECC_BAD, M_SCD_MEM_ECC_BAD) + +#define S_SCD_MEM_BUSERR 16 +#define M_SCD_MEM_BUSERR _SB_MAKEMASK(8, S_SCD_MEM_BUSERR) +#define V_SCD_MEM_BUSERR(x) _SB_MAKEVALUE(x, S_SCD_MEM_BUSERR) +#define G_SCD_MEM_BUSERR(x) _SB_GETVALUE(x, S_SCD_MEM_BUSERR, M_SCD_MEM_BUSERR) + + +/* + * Address Trap Registers + */ + +#if SIBYTE_HDR_FEATURE_1250_112x +#define M_ATRAP_INDEX _SB_MAKEMASK(4, 0) +#define M_ATRAP_ADDRESS _SB_MAKEMASK(40, 0) + +#define S_ATRAP_CFG_CNT 0 +#define M_ATRAP_CFG_CNT _SB_MAKEMASK(3, S_ATRAP_CFG_CNT) +#define V_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_CNT) +#define G_ATRAP_CFG_CNT(x) _SB_GETVALUE(x, S_ATRAP_CFG_CNT, M_ATRAP_CFG_CNT) + +#define M_ATRAP_CFG_WRITE _SB_MAKEMASK1(3) +#define M_ATRAP_CFG_ALL _SB_MAKEMASK1(4) +#define M_ATRAP_CFG_INV _SB_MAKEMASK1(5) +#define M_ATRAP_CFG_USESRC _SB_MAKEMASK1(6) +#define M_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7) + +#define S_ATRAP_CFG_AGENTID 8 +#define M_ATRAP_CFG_AGENTID _SB_MAKEMASK(4, S_ATRAP_CFG_AGENTID) +#define V_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_AGENTID) +#define G_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x, S_ATRAP_CFG_AGENTID, M_ATRAP_CFG_AGENTID) + +#define K_BUS_AGENT_CPU0 0 +#define K_BUS_AGENT_CPU1 1 +#define K_BUS_AGENT_IOB0 2 +#define K_BUS_AGENT_IOB1 3 +#define K_BUS_AGENT_SCD 4 +#define K_BUS_AGENT_L2C 6 +#define K_BUS_AGENT_MC 7 + +#define S_ATRAP_CFG_CATTR 12 +#define M_ATRAP_CFG_CATTR _SB_MAKEMASK(3, S_ATRAP_CFG_CATTR) +#define V_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_CATTR) +#define G_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x, S_ATRAP_CFG_CATTR, M_ATRAP_CFG_CATTR) + +#define K_ATRAP_CFG_CATTR_IGNORE 0 +#define K_ATRAP_CFG_CATTR_UNC 1 +#define K_ATRAP_CFG_CATTR_CACHEABLE 2 +#define K_ATRAP_CFG_CATTR_NONCOH 3 +#define K_ATRAP_CFG_CATTR_COHERENT 4 +#define K_ATRAP_CFG_CATTR_NOTUNC 5 +#define K_ATRAP_CFG_CATTR_NOTNONCOH 6 +#define K_ATRAP_CFG_CATTR_NOTCOHERENT 7 + +#endif /* 1250/112x */ + +/* + * Trace Buffer Config register + */ + +#define M_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0) +#define M_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1) +#define M_SCD_TRACE_CFG_START _SB_MAKEMASK1(2) +#define M_SCD_TRACE_CFG_STOP _SB_MAKEMASK1(3) +#define M_SCD_TRACE_CFG_FREEZE _SB_MAKEMASK1(4) +#define M_SCD_TRACE_CFG_FREEZE_FULL _SB_MAKEMASK1(5) +#define M_SCD_TRACE_CFG_DEBUG_FULL _SB_MAKEMASK1(6) +#define M_SCD_TRACE_CFG_FULL _SB_MAKEMASK1(7) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_SCD_TRACE_CFG_FORCECNT _SB_MAKEMASK1(8) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +/* + * This field is the same on the 1250/112x and 1480, just located in + * a slightly different place in the register. + */ +#if SIBYTE_HDR_FEATURE_1250_112x +#define S_SCD_TRACE_CFG_CUR_ADDR 10 +#else +#if SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_SCD_TRACE_CFG_CUR_ADDR 24 +#endif /* 1480 */ +#endif /* 1250/112x */ + +#define M_SCD_TRACE_CFG_CUR_ADDR _SB_MAKEMASK(8, S_SCD_TRACE_CFG_CUR_ADDR) +#define V_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR) +#define G_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR, M_SCD_TRACE_CFG_CUR_ADDR) + +/* + * Trace Event registers + */ + +#define S_SCD_TREVT_ADDR_MATCH 0 +#define M_SCD_TREVT_ADDR_MATCH _SB_MAKEMASK(4, S_SCD_TREVT_ADDR_MATCH) +#define V_SCD_TREVT_ADDR_MATCH(x) _SB_MAKEVALUE(x, S_SCD_TREVT_ADDR_MATCH) +#define G_SCD_TREVT_ADDR_MATCH(x) _SB_GETVALUE(x, S_SCD_TREVT_ADDR_MATCH, M_SCD_TREVT_ADDR_MATCH) + +#define M_SCD_TREVT_REQID_MATCH _SB_MAKEMASK1(4) +#define M_SCD_TREVT_DATAID_MATCH _SB_MAKEMASK1(5) +#define M_SCD_TREVT_RESPID_MATCH _SB_MAKEMASK1(6) +#define M_SCD_TREVT_INTERRUPT _SB_MAKEMASK1(7) +#define M_SCD_TREVT_DEBUG_PIN _SB_MAKEMASK1(9) +#define M_SCD_TREVT_WRITE _SB_MAKEMASK1(10) +#define M_SCD_TREVT_READ _SB_MAKEMASK1(11) + +#define S_SCD_TREVT_REQID 12 +#define M_SCD_TREVT_REQID _SB_MAKEMASK(4, S_SCD_TREVT_REQID) +#define V_SCD_TREVT_REQID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_REQID) +#define G_SCD_TREVT_REQID(x) _SB_GETVALUE(x, S_SCD_TREVT_REQID, M_SCD_TREVT_REQID) + +#define S_SCD_TREVT_RESPID 16 +#define M_SCD_TREVT_RESPID _SB_MAKEMASK(4, S_SCD_TREVT_RESPID) +#define V_SCD_TREVT_RESPID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_RESPID) +#define G_SCD_TREVT_RESPID(x) _SB_GETVALUE(x, S_SCD_TREVT_RESPID, M_SCD_TREVT_RESPID) + +#define S_SCD_TREVT_DATAID 20 +#define M_SCD_TREVT_DATAID _SB_MAKEMASK(4, S_SCD_TREVT_DATAID) +#define V_SCD_TREVT_DATAID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_DATAID) +#define G_SCD_TREVT_DATAID(x) _SB_GETVALUE(x, S_SCD_TREVT_DATAID, M_SCD_TREVT_DATID) + +#define S_SCD_TREVT_COUNT 24 +#define M_SCD_TREVT_COUNT _SB_MAKEMASK(8, S_SCD_TREVT_COUNT) +#define V_SCD_TREVT_COUNT(x) _SB_MAKEVALUE(x, S_SCD_TREVT_COUNT) +#define G_SCD_TREVT_COUNT(x) _SB_GETVALUE(x, S_SCD_TREVT_COUNT, M_SCD_TREVT_COUNT) + +/* + * Trace Sequence registers + */ + +#define S_SCD_TRSEQ_EVENT4 0 +#define M_SCD_TRSEQ_EVENT4 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT4) +#define V_SCD_TRSEQ_EVENT4(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT4) +#define G_SCD_TRSEQ_EVENT4(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT4, M_SCD_TRSEQ_EVENT4) + +#define S_SCD_TRSEQ_EVENT3 4 +#define M_SCD_TRSEQ_EVENT3 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT3) +#define V_SCD_TRSEQ_EVENT3(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT3) +#define G_SCD_TRSEQ_EVENT3(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT3, M_SCD_TRSEQ_EVENT3) + +#define S_SCD_TRSEQ_EVENT2 8 +#define M_SCD_TRSEQ_EVENT2 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT2) +#define V_SCD_TRSEQ_EVENT2(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT2) +#define G_SCD_TRSEQ_EVENT2(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT2, M_SCD_TRSEQ_EVENT2) + +#define S_SCD_TRSEQ_EVENT1 12 +#define M_SCD_TRSEQ_EVENT1 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT1) +#define V_SCD_TRSEQ_EVENT1(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT1) +#define G_SCD_TRSEQ_EVENT1(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT1, M_SCD_TRSEQ_EVENT1) + +#define K_SCD_TRSEQ_E0 0 +#define K_SCD_TRSEQ_E1 1 +#define K_SCD_TRSEQ_E2 2 +#define K_SCD_TRSEQ_E3 3 +#define K_SCD_TRSEQ_E0_E1 4 +#define K_SCD_TRSEQ_E1_E2 5 +#define K_SCD_TRSEQ_E2_E3 6 +#define K_SCD_TRSEQ_E0_E1_E2 7 +#define K_SCD_TRSEQ_E0_E1_E2_E3 8 +#define K_SCD_TRSEQ_E0E1 9 +#define K_SCD_TRSEQ_E0E1E2 10 +#define K_SCD_TRSEQ_E0E1E2E3 11 +#define K_SCD_TRSEQ_E0E1_E2 12 +#define K_SCD_TRSEQ_E0E1_E2E3 13 +#define K_SCD_TRSEQ_E0E1_E2_E3 14 +#define K_SCD_TRSEQ_IGNORED 15 + +#define K_SCD_TRSEQ_TRIGGER_ALL (V_SCD_TRSEQ_EVENT1(K_SCD_TRSEQ_IGNORED) | \ + V_SCD_TRSEQ_EVENT2(K_SCD_TRSEQ_IGNORED) | \ + V_SCD_TRSEQ_EVENT3(K_SCD_TRSEQ_IGNORED) | \ + V_SCD_TRSEQ_EVENT4(K_SCD_TRSEQ_IGNORED)) + +#define S_SCD_TRSEQ_FUNCTION 16 +#define M_SCD_TRSEQ_FUNCTION _SB_MAKEMASK(4, S_SCD_TRSEQ_FUNCTION) +#define V_SCD_TRSEQ_FUNCTION(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_FUNCTION) +#define G_SCD_TRSEQ_FUNCTION(x) _SB_GETVALUE(x, S_SCD_TRSEQ_FUNCTION, M_SCD_TRSEQ_FUNCTION) + +#define K_SCD_TRSEQ_FUNC_NOP 0 +#define K_SCD_TRSEQ_FUNC_START 1 +#define K_SCD_TRSEQ_FUNC_STOP 2 +#define K_SCD_TRSEQ_FUNC_FREEZE 3 + +#define V_SCD_TRSEQ_FUNC_NOP V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_NOP) +#define V_SCD_TRSEQ_FUNC_START V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_START) +#define V_SCD_TRSEQ_FUNC_STOP V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_STOP) +#define V_SCD_TRSEQ_FUNC_FREEZE V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_FREEZE) + +#define M_SCD_TRSEQ_ASAMPLE _SB_MAKEMASK1(18) +#define M_SCD_TRSEQ_DSAMPLE _SB_MAKEMASK1(19) +#define M_SCD_TRSEQ_DEBUGPIN _SB_MAKEMASK1(20) +#define M_SCD_TRSEQ_DEBUGCPU _SB_MAKEMASK1(21) +#define M_SCD_TRSEQ_CLEARUSE _SB_MAKEMASK1(22) +#define M_SCD_TRSEQ_ALLD_A _SB_MAKEMASK1(23) +#define M_SCD_TRSEQ_ALL_A _SB_MAKEMASK1(24) + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_smbus.h b/arch/mips/include/asm/sibyte/sb1250_smbus.h new file mode 100644 index 000000000000..04769923cf1e --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_smbus.h @@ -0,0 +1,204 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * SMBUS Constants File: sb1250_smbus.h + * + * This module contains constants and macros useful for + * manipulating the SB1250's SMbus devices. + * + * SB1250 specification level: 10/21/02 + * BCM1280 specification level: 11/24/03 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_SMBUS_H +#define _SB1250_SMBUS_H + +#include "sb1250_defs.h" + +/* + * SMBus Clock Frequency Register (Table 14-2) + */ + +#define S_SMB_FREQ_DIV 0 +#define M_SMB_FREQ_DIV _SB_MAKEMASK(13, S_SMB_FREQ_DIV) +#define V_SMB_FREQ_DIV(x) _SB_MAKEVALUE(x, S_SMB_FREQ_DIV) + +#define K_SMB_FREQ_400KHZ 0x1F +#define K_SMB_FREQ_100KHZ 0x7D +#define K_SMB_FREQ_10KHZ 1250 + +#define S_SMB_CMD 0 +#define M_SMB_CMD _SB_MAKEMASK(8, S_SMB_CMD) +#define V_SMB_CMD(x) _SB_MAKEVALUE(x, S_SMB_CMD) + +/* + * SMBus control register (Table 14-4) + */ + +#define M_SMB_ERR_INTR _SB_MAKEMASK1(0) +#define M_SMB_FINISH_INTR _SB_MAKEMASK1(1) + +#define S_SMB_DATA_OUT 4 +#define M_SMB_DATA_OUT _SB_MAKEMASK1(S_SMB_DATA_OUT) +#define V_SMB_DATA_OUT(x) _SB_MAKEVALUE(x, S_SMB_DATA_OUT) + +#define M_SMB_DATA_DIR _SB_MAKEMASK1(5) +#define M_SMB_DATA_DIR_OUTPUT M_SMB_DATA_DIR +#define M_SMB_CLK_OUT _SB_MAKEMASK1(6) +#define M_SMB_DIRECT_ENABLE _SB_MAKEMASK1(7) + +/* + * SMBus status registers (Table 14-5) + */ + +#define M_SMB_BUSY _SB_MAKEMASK1(0) +#define M_SMB_ERROR _SB_MAKEMASK1(1) +#define M_SMB_ERROR_TYPE _SB_MAKEMASK1(2) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_SMB_SCL_IN 5 +#define M_SMB_SCL_IN _SB_MAKEMASK1(S_SMB_SCL_IN) +#define V_SMB_SCL_IN(x) _SB_MAKEVALUE(x, S_SMB_SCL_IN) +#define G_SMB_SCL_IN(x) _SB_GETVALUE(x, S_SMB_SCL_IN, M_SMB_SCL_IN) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define S_SMB_REF 6 +#define M_SMB_REF _SB_MAKEMASK1(S_SMB_REF) +#define V_SMB_REF(x) _SB_MAKEVALUE(x, S_SMB_REF) +#define G_SMB_REF(x) _SB_GETVALUE(x, S_SMB_REF, M_SMB_REF) + +#define S_SMB_DATA_IN 7 +#define M_SMB_DATA_IN _SB_MAKEMASK1(S_SMB_DATA_IN) +#define V_SMB_DATA_IN(x) _SB_MAKEVALUE(x, S_SMB_DATA_IN) +#define G_SMB_DATA_IN(x) _SB_GETVALUE(x, S_SMB_DATA_IN, M_SMB_DATA_IN) + +/* + * SMBus Start/Command registers (Table 14-9) + */ + +#define S_SMB_ADDR 0 +#define M_SMB_ADDR _SB_MAKEMASK(7, S_SMB_ADDR) +#define V_SMB_ADDR(x) _SB_MAKEVALUE(x, S_SMB_ADDR) +#define G_SMB_ADDR(x) _SB_GETVALUE(x, S_SMB_ADDR, M_SMB_ADDR) + +#define M_SMB_QDATA _SB_MAKEMASK1(7) + +#define S_SMB_TT 8 +#define M_SMB_TT _SB_MAKEMASK(3, S_SMB_TT) +#define V_SMB_TT(x) _SB_MAKEVALUE(x, S_SMB_TT) +#define G_SMB_TT(x) _SB_GETVALUE(x, S_SMB_TT, M_SMB_TT) + +#define K_SMB_TT_WR1BYTE 0 +#define K_SMB_TT_WR2BYTE 1 +#define K_SMB_TT_WR3BYTE 2 +#define K_SMB_TT_CMD_RD1BYTE 3 +#define K_SMB_TT_CMD_RD2BYTE 4 +#define K_SMB_TT_RD1BYTE 5 +#define K_SMB_TT_QUICKCMD 6 +#define K_SMB_TT_EEPROMREAD 7 + +#define V_SMB_TT_WR1BYTE V_SMB_TT(K_SMB_TT_WR1BYTE) +#define V_SMB_TT_WR2BYTE V_SMB_TT(K_SMB_TT_WR2BYTE) +#define V_SMB_TT_WR3BYTE V_SMB_TT(K_SMB_TT_WR3BYTE) +#define V_SMB_TT_CMD_RD1BYTE V_SMB_TT(K_SMB_TT_CMD_RD1BYTE) +#define V_SMB_TT_CMD_RD2BYTE V_SMB_TT(K_SMB_TT_CMD_RD2BYTE) +#define V_SMB_TT_RD1BYTE V_SMB_TT(K_SMB_TT_RD1BYTE) +#define V_SMB_TT_QUICKCMD V_SMB_TT(K_SMB_TT_QUICKCMD) +#define V_SMB_TT_EEPROMREAD V_SMB_TT(K_SMB_TT_EEPROMREAD) + +#define M_SMB_PEC _SB_MAKEMASK1(15) + +/* + * SMBus Data Register (Table 14-6) and SMBus Extra Register (Table 14-7) + */ + +#define S_SMB_LB 0 +#define M_SMB_LB _SB_MAKEMASK(8, S_SMB_LB) +#define V_SMB_LB(x) _SB_MAKEVALUE(x, S_SMB_LB) + +#define S_SMB_MB 8 +#define M_SMB_MB _SB_MAKEMASK(8, S_SMB_MB) +#define V_SMB_MB(x) _SB_MAKEVALUE(x, S_SMB_MB) + + +/* + * SMBus Packet Error Check register (Table 14-8) + */ + +#define S_SPEC_PEC 0 +#define M_SPEC_PEC _SB_MAKEMASK(8, S_SPEC_PEC) +#define V_SPEC_MB(x) _SB_MAKEVALUE(x, S_SPEC_PEC) + + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) + +#define S_SMB_CMDH 8 +#define M_SMB_CMDH _SB_MAKEMASK(8, S_SMB_CMDH) +#define V_SMB_CMDH(x) _SB_MAKEVALUE(x, S_SMB_CMDH) + +#define M_SMB_EXTEND _SB_MAKEMASK1(14) + +#define S_SMB_DFMT 8 +#define M_SMB_DFMT _SB_MAKEMASK(3, S_SMB_DFMT) +#define V_SMB_DFMT(x) _SB_MAKEVALUE(x, S_SMB_DFMT) +#define G_SMB_DFMT(x) _SB_GETVALUE(x, S_SMB_DFMT, M_SMB_DFMT) + +#define K_SMB_DFMT_1BYTE 0 +#define K_SMB_DFMT_2BYTE 1 +#define K_SMB_DFMT_3BYTE 2 +#define K_SMB_DFMT_4BYTE 3 +#define K_SMB_DFMT_NODATA 4 +#define K_SMB_DFMT_CMD4BYTE 5 +#define K_SMB_DFMT_CMD5BYTE 6 +#define K_SMB_DFMT_RESERVED 7 + +#define V_SMB_DFMT_1BYTE V_SMB_DFMT(K_SMB_DFMT_1BYTE) +#define V_SMB_DFMT_2BYTE V_SMB_DFMT(K_SMB_DFMT_2BYTE) +#define V_SMB_DFMT_3BYTE V_SMB_DFMT(K_SMB_DFMT_3BYTE) +#define V_SMB_DFMT_4BYTE V_SMB_DFMT(K_SMB_DFMT_4BYTE) +#define V_SMB_DFMT_NODATA V_SMB_DFMT(K_SMB_DFMT_NODATA) +#define V_SMB_DFMT_CMD4BYTE V_SMB_DFMT(K_SMB_DFMT_CMD4BYTE) +#define V_SMB_DFMT_CMD5BYTE V_SMB_DFMT(K_SMB_DFMT_CMD5BYTE) +#define V_SMB_DFMT_RESERVED V_SMB_DFMT(K_SMB_DFMT_RESERVED) + +#define S_SMB_AFMT 11 +#define M_SMB_AFMT _SB_MAKEMASK(2, S_SMB_AFMT) +#define V_SMB_AFMT(x) _SB_MAKEVALUE(x, S_SMB_AFMT) +#define G_SMB_AFMT(x) _SB_GETVALUE(x, S_SMB_AFMT, M_SMB_AFMT) + +#define K_SMB_AFMT_NONE 0 +#define K_SMB_AFMT_ADDR 1 +#define K_SMB_AFMT_ADDR_CMD1BYTE 2 +#define K_SMB_AFMT_ADDR_CMD2BYTE 3 + +#define V_SMB_AFMT_NONE V_SMB_AFMT(K_SMB_AFMT_NONE) +#define V_SMB_AFMT_ADDR V_SMB_AFMT(K_SMB_AFMT_ADDR) +#define V_SMB_AFMT_ADDR_CMD1BYTE V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD1BYTE) +#define V_SMB_AFMT_ADDR_CMD2BYTE V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD2BYTE) + +#define M_SMB_DIR _SB_MAKEMASK1(13) + +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_syncser.h b/arch/mips/include/asm/sibyte/sb1250_syncser.h new file mode 100644 index 000000000000..d4b8558e0bf1 --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_syncser.h @@ -0,0 +1,146 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * Synchronous Serial Constants File: sb1250_syncser.h + * + * This module contains constants and macros useful for + * manipulating the SB1250's Synchronous Serial + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_SYNCSER_H +#define _SB1250_SYNCSER_H + +#include "sb1250_defs.h" + +/* + * Serial Mode Configuration Register + */ + +#define M_SYNCSER_CRC_MODE _SB_MAKEMASK1(0) +#define M_SYNCSER_MSB_FIRST _SB_MAKEMASK1(1) + +#define S_SYNCSER_FLAG_NUM 2 +#define M_SYNCSER_FLAG_NUM _SB_MAKEMASK(4, S_SYNCSER_FLAG_NUM) +#define V_SYNCSER_FLAG_NUM _SB_MAKEVALUE(x, S_SYNCSER_FLAG_NUM) + +#define M_SYNCSER_FLAG_EN _SB_MAKEMASK1(6) +#define M_SYNCSER_HDLC_EN _SB_MAKEMASK1(7) +#define M_SYNCSER_LOOP_MODE _SB_MAKEMASK1(8) +#define M_SYNCSER_LOOPBACK _SB_MAKEMASK1(9) + +/* + * Serial Clock Source and Line Interface Mode Register + */ + +#define M_SYNCSER_RXCLK_INV _SB_MAKEMASK1(0) +#define M_SYNCSER_RXCLK_EXT _SB_MAKEMASK1(1) + +#define S_SYNCSER_RXSYNC_DLY 2 +#define M_SYNCSER_RXSYNC_DLY _SB_MAKEMASK(2, S_SYNCSER_RXSYNC_DLY) +#define V_SYNCSER_RXSYNC_DLY(x) _SB_MAKEVALUE(x, S_SYNCSER_RXSYNC_DLY) + +#define M_SYNCSER_RXSYNC_LOW _SB_MAKEMASK1(4) +#define M_SYNCSER_RXSTRB_LOW _SB_MAKEMASK1(5) + +#define M_SYNCSER_RXSYNC_EDGE _SB_MAKEMASK1(6) +#define M_SYNCSER_RXSYNC_INT _SB_MAKEMASK1(7) + +#define M_SYNCSER_TXCLK_INV _SB_MAKEMASK1(8) +#define M_SYNCSER_TXCLK_EXT _SB_MAKEMASK1(9) + +#define S_SYNCSER_TXSYNC_DLY 10 +#define M_SYNCSER_TXSYNC_DLY _SB_MAKEMASK(2, S_SYNCSER_TXSYNC_DLY) +#define V_SYNCSER_TXSYNC_DLY(x) _SB_MAKEVALUE(x, S_SYNCSER_TXSYNC_DLY) + +#define M_SYNCSER_TXSYNC_LOW _SB_MAKEMASK1(12) +#define M_SYNCSER_TXSTRB_LOW _SB_MAKEMASK1(13) + +#define M_SYNCSER_TXSYNC_EDGE _SB_MAKEMASK1(14) +#define M_SYNCSER_TXSYNC_INT _SB_MAKEMASK1(15) + +/* + * Serial Command Register + */ + +#define M_SYNCSER_CMD_RX_EN _SB_MAKEMASK1(0) +#define M_SYNCSER_CMD_TX_EN _SB_MAKEMASK1(1) +#define M_SYNCSER_CMD_RX_RESET _SB_MAKEMASK1(2) +#define M_SYNCSER_CMD_TX_RESET _SB_MAKEMASK1(3) +#define M_SYNCSER_CMD_TX_PAUSE _SB_MAKEMASK1(5) + +/* + * Serial DMA Enable Register + */ + +#define M_SYNCSER_DMA_RX_EN _SB_MAKEMASK1(0) +#define M_SYNCSER_DMA_TX_EN _SB_MAKEMASK1(4) + +/* + * Serial Status Register + */ + +#define M_SYNCSER_RX_CRCERR _SB_MAKEMASK1(0) +#define M_SYNCSER_RX_ABORT _SB_MAKEMASK1(1) +#define M_SYNCSER_RX_OCTET _SB_MAKEMASK1(2) +#define M_SYNCSER_RX_LONGFRM _SB_MAKEMASK1(3) +#define M_SYNCSER_RX_SHORTFRM _SB_MAKEMASK1(4) +#define M_SYNCSER_RX_OVERRUN _SB_MAKEMASK1(5) +#define M_SYNCSER_RX_SYNC_ERR _SB_MAKEMASK1(6) +#define M_SYNCSER_TX_CRCERR _SB_MAKEMASK1(8) +#define M_SYNCSER_TX_UNDERRUN _SB_MAKEMASK1(9) +#define M_SYNCSER_TX_SYNC_ERR _SB_MAKEMASK1(10) +#define M_SYNCSER_TX_PAUSE_COMPLETE _SB_MAKEMASK1(11) +#define M_SYNCSER_RX_EOP_COUNT _SB_MAKEMASK1(16) +#define M_SYNCSER_RX_EOP_TIMER _SB_MAKEMASK1(17) +#define M_SYNCSER_RX_EOP_SEEN _SB_MAKEMASK1(18) +#define M_SYNCSER_RX_HWM _SB_MAKEMASK1(19) +#define M_SYNCSER_RX_LWM _SB_MAKEMASK1(20) +#define M_SYNCSER_RX_DSCR _SB_MAKEMASK1(21) +#define M_SYNCSER_RX_DERR _SB_MAKEMASK1(22) +#define M_SYNCSER_TX_EOP_COUNT _SB_MAKEMASK1(24) +#define M_SYNCSER_TX_EOP_TIMER _SB_MAKEMASK1(25) +#define M_SYNCSER_TX_EOP_SEEN _SB_MAKEMASK1(26) +#define M_SYNCSER_TX_HWM _SB_MAKEMASK1(27) +#define M_SYNCSER_TX_LWM _SB_MAKEMASK1(28) +#define M_SYNCSER_TX_DSCR _SB_MAKEMASK1(29) +#define M_SYNCSER_TX_DERR _SB_MAKEMASK1(30) +#define M_SYNCSER_TX_DZERO _SB_MAKEMASK1(31) + +/* + * Sequencer Table Entry format + */ + +#define M_SYNCSER_SEQ_LAST _SB_MAKEMASK1(0) +#define M_SYNCSER_SEQ_BYTE _SB_MAKEMASK1(1) + +#define S_SYNCSER_SEQ_COUNT 2 +#define M_SYNCSER_SEQ_COUNT _SB_MAKEMASK(4, S_SYNCSER_SEQ_COUNT) +#define V_SYNCSER_SEQ_COUNT(x) _SB_MAKEVALUE(x, S_SYNCSER_SEQ_COUNT) + +#define M_SYNCSER_SEQ_ENABLE _SB_MAKEMASK1(6) +#define M_SYNCSER_SEQ_STROBE _SB_MAKEMASK1(7) + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_uart.h b/arch/mips/include/asm/sibyte/sb1250_uart.h new file mode 100644 index 000000000000..d835bf280140 --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_uart.h @@ -0,0 +1,362 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * UART Constants File: sb1250_uart.h + * + * This module contains constants and macros useful for + * manipulating the SB1250's UARTs + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_UART_H +#define _SB1250_UART_H + +#include "sb1250_defs.h" + +/* ********************************************************************** + * DUART Registers + ********************************************************************** */ + +/* + * DUART Mode Register #1 (Table 10-3) + * Register: DUART_MODE_REG_1_A + * Register: DUART_MODE_REG_1_B + */ + +#define S_DUART_BITS_PER_CHAR 0 +#define M_DUART_BITS_PER_CHAR _SB_MAKEMASK(2, S_DUART_BITS_PER_CHAR) +#define V_DUART_BITS_PER_CHAR(x) _SB_MAKEVALUE(x, S_DUART_BITS_PER_CHAR) + +#define K_DUART_BITS_PER_CHAR_RSV0 0 +#define K_DUART_BITS_PER_CHAR_RSV1 1 +#define K_DUART_BITS_PER_CHAR_7 2 +#define K_DUART_BITS_PER_CHAR_8 3 + +#define V_DUART_BITS_PER_CHAR_RSV0 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV0) +#define V_DUART_BITS_PER_CHAR_RSV1 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV1) +#define V_DUART_BITS_PER_CHAR_7 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_7) +#define V_DUART_BITS_PER_CHAR_8 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_8) + + +#define M_DUART_PARITY_TYPE_EVEN 0x00 +#define M_DUART_PARITY_TYPE_ODD _SB_MAKEMASK1(2) + +#define S_DUART_PARITY_MODE 3 +#define M_DUART_PARITY_MODE _SB_MAKEMASK(2, S_DUART_PARITY_MODE) +#define V_DUART_PARITY_MODE(x) _SB_MAKEVALUE(x, S_DUART_PARITY_MODE) + +#define K_DUART_PARITY_MODE_ADD 0 +#define K_DUART_PARITY_MODE_ADD_FIXED 1 +#define K_DUART_PARITY_MODE_NONE 2 + +#define V_DUART_PARITY_MODE_ADD V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD) +#define V_DUART_PARITY_MODE_ADD_FIXED V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD_FIXED) +#define V_DUART_PARITY_MODE_NONE V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_NONE) + +#define M_DUART_TX_IRQ_SEL_TXRDY 0 +#define M_DUART_TX_IRQ_SEL_TXEMPT _SB_MAKEMASK1(5) + +#define M_DUART_RX_IRQ_SEL_RXRDY 0 +#define M_DUART_RX_IRQ_SEL_RXFULL _SB_MAKEMASK1(6) + +#define M_DUART_RX_RTS_ENA _SB_MAKEMASK1(7) + +/* + * DUART Mode Register #2 (Table 10-4) + * Register: DUART_MODE_REG_2_A + * Register: DUART_MODE_REG_2_B + */ + +#define M_DUART_MODE_RESERVED1 _SB_MAKEMASK(3, 0) /* ignored */ + +#define M_DUART_STOP_BIT_LEN_2 _SB_MAKEMASK1(3) +#define M_DUART_STOP_BIT_LEN_1 0 + +#define M_DUART_TX_CTS_ENA _SB_MAKEMASK1(4) + + +#define M_DUART_MODE_RESERVED2 _SB_MAKEMASK1(5) /* must be zero */ + +#define S_DUART_CHAN_MODE 6 +#define M_DUART_CHAN_MODE _SB_MAKEMASK(2, S_DUART_CHAN_MODE) +#define V_DUART_CHAN_MODE(x) _SB_MAKEVALUE(x, S_DUART_CHAN_MODE) + +#define K_DUART_CHAN_MODE_NORMAL 0 +#define K_DUART_CHAN_MODE_LCL_LOOP 2 +#define K_DUART_CHAN_MODE_REM_LOOP 3 + +#define V_DUART_CHAN_MODE_NORMAL V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_NORMAL) +#define V_DUART_CHAN_MODE_LCL_LOOP V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_LCL_LOOP) +#define V_DUART_CHAN_MODE_REM_LOOP V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_REM_LOOP) + +/* + * DUART Command Register (Table 10-5) + * Register: DUART_CMD_A + * Register: DUART_CMD_B + */ + +#define M_DUART_RX_EN _SB_MAKEMASK1(0) +#define M_DUART_RX_DIS _SB_MAKEMASK1(1) +#define M_DUART_TX_EN _SB_MAKEMASK1(2) +#define M_DUART_TX_DIS _SB_MAKEMASK1(3) + +#define S_DUART_MISC_CMD 4 +#define M_DUART_MISC_CMD _SB_MAKEMASK(3, S_DUART_MISC_CMD) +#define V_DUART_MISC_CMD(x) _SB_MAKEVALUE(x, S_DUART_MISC_CMD) + +#define K_DUART_MISC_CMD_NOACTION0 0 +#define K_DUART_MISC_CMD_NOACTION1 1 +#define K_DUART_MISC_CMD_RESET_RX 2 +#define K_DUART_MISC_CMD_RESET_TX 3 +#define K_DUART_MISC_CMD_NOACTION4 4 +#define K_DUART_MISC_CMD_RESET_BREAK_INT 5 +#define K_DUART_MISC_CMD_START_BREAK 6 +#define K_DUART_MISC_CMD_STOP_BREAK 7 + +#define V_DUART_MISC_CMD_NOACTION0 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION0) +#define V_DUART_MISC_CMD_NOACTION1 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION1) +#define V_DUART_MISC_CMD_RESET_RX V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_RX) +#define V_DUART_MISC_CMD_RESET_TX V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_TX) +#define V_DUART_MISC_CMD_NOACTION4 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION4) +#define V_DUART_MISC_CMD_RESET_BREAK_INT V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_BREAK_INT) +#define V_DUART_MISC_CMD_START_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK) +#define V_DUART_MISC_CMD_STOP_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK) + +#define M_DUART_CMD_RESERVED _SB_MAKEMASK1(7) + +/* + * DUART Status Register (Table 10-6) + * Register: DUART_STATUS_A + * Register: DUART_STATUS_B + * READ-ONLY + */ + +#define M_DUART_RX_RDY _SB_MAKEMASK1(0) +#define M_DUART_RX_FFUL _SB_MAKEMASK1(1) +#define M_DUART_TX_RDY _SB_MAKEMASK1(2) +#define M_DUART_TX_EMT _SB_MAKEMASK1(3) +#define M_DUART_OVRUN_ERR _SB_MAKEMASK1(4) +#define M_DUART_PARITY_ERR _SB_MAKEMASK1(5) +#define M_DUART_FRM_ERR _SB_MAKEMASK1(6) +#define M_DUART_RCVD_BRK _SB_MAKEMASK1(7) + +/* + * DUART Baud Rate Register (Table 10-7) + * Register: DUART_CLK_SEL_A + * Register: DUART_CLK_SEL_B + */ + +#define M_DUART_CLK_COUNTER _SB_MAKEMASK(12, 0) +#define V_DUART_BAUD_RATE(x) (100000000/((x)*20)-1) + +/* + * DUART Data Registers (Table 10-8 and 10-9) + * Register: DUART_RX_HOLD_A + * Register: DUART_RX_HOLD_B + * Register: DUART_TX_HOLD_A + * Register: DUART_TX_HOLD_B + */ + +#define M_DUART_RX_DATA _SB_MAKEMASK(8, 0) +#define M_DUART_TX_DATA _SB_MAKEMASK(8, 0) + +/* + * DUART Input Port Register (Table 10-10) + * Register: DUART_IN_PORT + */ + +#define M_DUART_IN_PIN0_VAL _SB_MAKEMASK1(0) +#define M_DUART_IN_PIN1_VAL _SB_MAKEMASK1(1) +#define M_DUART_IN_PIN2_VAL _SB_MAKEMASK1(2) +#define M_DUART_IN_PIN3_VAL _SB_MAKEMASK1(3) +#define M_DUART_IN_PIN4_VAL _SB_MAKEMASK1(4) +#define M_DUART_IN_PIN5_VAL _SB_MAKEMASK1(5) +#define M_DUART_RIN0_PIN _SB_MAKEMASK1(6) +#define M_DUART_RIN1_PIN _SB_MAKEMASK1(7) + +/* + * DUART Input Port Change Status Register (Tables 10-11, 10-12, and 10-13) + * Register: DUART_INPORT_CHNG + */ + +#define S_DUART_IN_PIN_VAL 0 +#define M_DUART_IN_PIN_VAL _SB_MAKEMASK(4, S_DUART_IN_PIN_VAL) + +#define S_DUART_IN_PIN_CHNG 4 +#define M_DUART_IN_PIN_CHNG _SB_MAKEMASK(4, S_DUART_IN_PIN_CHNG) + + +/* + * DUART Output port control register (Table 10-14) + * Register: DUART_OPCR + */ + +#define M_DUART_OPCR_RESERVED0 _SB_MAKEMASK1(0) /* must be zero */ +#define M_DUART_OPC2_SEL _SB_MAKEMASK1(1) +#define M_DUART_OPCR_RESERVED1 _SB_MAKEMASK1(2) /* must be zero */ +#define M_DUART_OPC3_SEL _SB_MAKEMASK1(3) +#define M_DUART_OPCR_RESERVED2 _SB_MAKEMASK(4, 4) /* must be zero */ + +/* + * DUART Aux Control Register (Table 10-15) + * Register: DUART_AUX_CTRL + */ + +#define M_DUART_IP0_CHNG_ENA _SB_MAKEMASK1(0) +#define M_DUART_IP1_CHNG_ENA _SB_MAKEMASK1(1) +#define M_DUART_IP2_CHNG_ENA _SB_MAKEMASK1(2) +#define M_DUART_IP3_CHNG_ENA _SB_MAKEMASK1(3) +#define M_DUART_ACR_RESERVED _SB_MAKEMASK(4, 4) + +#define M_DUART_CTS_CHNG_ENA _SB_MAKEMASK1(0) +#define M_DUART_CIN_CHNG_ENA _SB_MAKEMASK1(2) + +/* + * DUART Interrupt Status Register (Table 10-16) + * Register: DUART_ISR + */ + +#define M_DUART_ISR_TX_A _SB_MAKEMASK1(0) + +#define S_DUART_ISR_RX_A 1 +#define M_DUART_ISR_RX_A _SB_MAKEMASK1(S_DUART_ISR_RX_A) +#define V_DUART_ISR_RX_A(x) _SB_MAKEVALUE(x, S_DUART_ISR_RX_A) +#define G_DUART_ISR_RX_A(x) _SB_GETVALUE(x, S_DUART_ISR_RX_A, M_DUART_ISR_RX_A) + +#define M_DUART_ISR_BRK_A _SB_MAKEMASK1(2) +#define M_DUART_ISR_IN_A _SB_MAKEMASK1(3) +#define M_DUART_ISR_ALL_A _SB_MAKEMASK(4, 0) + +#define M_DUART_ISR_TX_B _SB_MAKEMASK1(4) +#define M_DUART_ISR_RX_B _SB_MAKEMASK1(5) +#define M_DUART_ISR_BRK_B _SB_MAKEMASK1(6) +#define M_DUART_ISR_IN_B _SB_MAKEMASK1(7) +#define M_DUART_ISR_ALL_B _SB_MAKEMASK(4, 4) + +/* + * DUART Channel A Interrupt Status Register (Table 10-17) + * DUART Channel B Interrupt Status Register (Table 10-18) + * Register: DUART_ISR_A + * Register: DUART_ISR_B + */ + +#define M_DUART_ISR_TX _SB_MAKEMASK1(0) +#define M_DUART_ISR_RX _SB_MAKEMASK1(1) +#define M_DUART_ISR_BRK _SB_MAKEMASK1(2) +#define M_DUART_ISR_IN _SB_MAKEMASK1(3) +#define M_DUART_ISR_ALL _SB_MAKEMASK(4, 0) +#define M_DUART_ISR_RESERVED _SB_MAKEMASK(4, 4) + +/* + * DUART Interrupt Mask Register (Table 10-19) + * Register: DUART_IMR + */ + +#define M_DUART_IMR_TX_A _SB_MAKEMASK1(0) +#define M_DUART_IMR_RX_A _SB_MAKEMASK1(1) +#define M_DUART_IMR_BRK_A _SB_MAKEMASK1(2) +#define M_DUART_IMR_IN_A _SB_MAKEMASK1(3) +#define M_DUART_IMR_ALL_A _SB_MAKEMASK(4, 0) + +#define M_DUART_IMR_TX_B _SB_MAKEMASK1(4) +#define M_DUART_IMR_RX_B _SB_MAKEMASK1(5) +#define M_DUART_IMR_BRK_B _SB_MAKEMASK1(6) +#define M_DUART_IMR_IN_B _SB_MAKEMASK1(7) +#define M_DUART_IMR_ALL_B _SB_MAKEMASK(4, 4) + +/* + * DUART Channel A Interrupt Mask Register (Table 10-20) + * DUART Channel B Interrupt Mask Register (Table 10-21) + * Register: DUART_IMR_A + * Register: DUART_IMR_B + */ + +#define M_DUART_IMR_TX _SB_MAKEMASK1(0) +#define M_DUART_IMR_RX _SB_MAKEMASK1(1) +#define M_DUART_IMR_BRK _SB_MAKEMASK1(2) +#define M_DUART_IMR_IN _SB_MAKEMASK1(3) +#define M_DUART_IMR_ALL _SB_MAKEMASK(4, 0) +#define M_DUART_IMR_RESERVED _SB_MAKEMASK(4, 4) + + +/* + * DUART Output Port Set Register (Table 10-22) + * Register: DUART_SET_OPR + */ + +#define M_DUART_SET_OPR0 _SB_MAKEMASK1(0) +#define M_DUART_SET_OPR1 _SB_MAKEMASK1(1) +#define M_DUART_SET_OPR2 _SB_MAKEMASK1(2) +#define M_DUART_SET_OPR3 _SB_MAKEMASK1(3) +#define M_DUART_OPSR_RESERVED _SB_MAKEMASK(4, 4) + +/* + * DUART Output Port Clear Register (Table 10-23) + * Register: DUART_CLEAR_OPR + */ + +#define M_DUART_CLR_OPR0 _SB_MAKEMASK1(0) +#define M_DUART_CLR_OPR1 _SB_MAKEMASK1(1) +#define M_DUART_CLR_OPR2 _SB_MAKEMASK1(2) +#define M_DUART_CLR_OPR3 _SB_MAKEMASK1(3) +#define M_DUART_OPCR_RESERVED _SB_MAKEMASK(4, 4) + +/* + * DUART Output Port RTS Register (Table 10-24) + * Register: DUART_OUT_PORT + */ + +#define M_DUART_OUT_PIN_SET0 _SB_MAKEMASK1(0) +#define M_DUART_OUT_PIN_SET1 _SB_MAKEMASK1(1) +#define M_DUART_OUT_PIN_CLR0 _SB_MAKEMASK1(2) +#define M_DUART_OUT_PIN_CLR1 _SB_MAKEMASK1(3) +#define M_DUART_OPRR_RESERVED _SB_MAKEMASK(4, 4) + +#define M_DUART_OUT_PIN_SET(chan) \ + (chan == 0 ? M_DUART_OUT_PIN_SET0 : M_DUART_OUT_PIN_SET1) +#define M_DUART_OUT_PIN_CLR(chan) \ + (chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +/* + * Full Interrupt Control Register + */ + +#define S_DUART_SIG_FULL _SB_MAKE64(0) +#define M_DUART_SIG_FULL _SB_MAKEMASK(4, S_DUART_SIG_FULL) +#define V_DUART_SIG_FULL(x) _SB_MAKEVALUE(x, S_DUART_SIG_FULL) +#define G_DUART_SIG_FULL(x) _SB_GETVALUE(x, S_DUART_SIG_FULL, M_DUART_SIG_FULL) + +#define S_DUART_INT_TIME _SB_MAKE64(4) +#define M_DUART_INT_TIME _SB_MAKEMASK(4, S_DUART_INT_TIME) +#define V_DUART_INT_TIME(x) _SB_MAKEVALUE(x, S_DUART_INT_TIME) +#define G_DUART_INT_TIME(x) _SB_GETVALUE(x, S_DUART_INT_TIME, M_DUART_INT_TIME) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + + +/* ********************************************************************** */ + + +#endif diff --git a/arch/mips/include/asm/sibyte/sentosa.h b/arch/mips/include/asm/sibyte/sentosa.h new file mode 100644 index 000000000000..64c47874f32d --- /dev/null +++ b/arch/mips/include/asm/sibyte/sentosa.h @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2000, 2001 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#ifndef __ASM_SIBYTE_SENTOSA_H +#define __ASM_SIBYTE_SENTOSA_H + +#include <asm/sibyte/sb1250.h> +#include <asm/sibyte/sb1250_int.h> + +#ifdef CONFIG_SIBYTE_SENTOSA +#define SIBYTE_BOARD_NAME "BCM91250E (Sentosa)" +#endif +#ifdef CONFIG_SIBYTE_RHONE +#define SIBYTE_BOARD_NAME "BCM91125E (Rhone)" +#endif + +/* Generic bus chip selects */ +#ifdef CONFIG_SIBYTE_RHONE +#define LEDS_CS 6 +#define LEDS_PHYS 0x1d0a0000 +#endif + +/* GPIOs */ +#define K_GPIO_DBG_LED 0 + +#endif /* __ASM_SIBYTE_SENTOSA_H */ diff --git a/arch/mips/include/asm/sibyte/swarm.h b/arch/mips/include/asm/sibyte/swarm.h new file mode 100644 index 000000000000..114d9d29ca9d --- /dev/null +++ b/arch/mips/include/asm/sibyte/swarm.h @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#ifndef __ASM_SIBYTE_SWARM_H +#define __ASM_SIBYTE_SWARM_H + +#include <asm/sibyte/sb1250.h> +#include <asm/sibyte/sb1250_int.h> + +#ifdef CONFIG_SIBYTE_SWARM +#define SIBYTE_BOARD_NAME "BCM91250A (SWARM)" +#define SIBYTE_HAVE_PCMCIA 1 +#define SIBYTE_HAVE_IDE 1 +#endif +#ifdef CONFIG_SIBYTE_LITTLESUR +#define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)" +#define SIBYTE_HAVE_PCMCIA 0 +#define SIBYTE_HAVE_IDE 1 +#define SIBYTE_DEFAULT_CONSOLE "cfe0" +#endif +#ifdef CONFIG_SIBYTE_CRHONE +#define SIBYTE_BOARD_NAME "BCM91125C (CRhone)" +#define SIBYTE_HAVE_PCMCIA 0 +#define SIBYTE_HAVE_IDE 0 +#endif +#ifdef CONFIG_SIBYTE_CRHINE +#define SIBYTE_BOARD_NAME "BCM91120C (CRhine)" +#define SIBYTE_HAVE_PCMCIA 0 +#define SIBYTE_HAVE_IDE 0 +#endif + +/* Generic bus chip selects */ +#define LEDS_CS 3 +#define LEDS_PHYS 0x100a0000 + +#ifdef SIBYTE_HAVE_IDE +#define IDE_CS 4 +#define IDE_PHYS 0x100b0000 +#define K_GPIO_GB_IDE 4 +#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE) +#endif + +#ifdef SIBYTE_HAVE_PCMCIA +#define PCMCIA_CS 6 +#define PCMCIA_PHYS 0x11000000 +#define K_GPIO_PC_READY 9 +#define K_INT_PC_READY (K_INT_GPIO_0 + K_GPIO_PC_READY) +#endif + +#endif /* __ASM_SIBYTE_SWARM_H */ diff --git a/arch/mips/include/asm/sigcontext.h b/arch/mips/include/asm/sigcontext.h new file mode 100644 index 000000000000..9ce0607d7a4e --- /dev/null +++ b/arch/mips/include/asm/sigcontext.h @@ -0,0 +1,100 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1997, 1999 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_SIGCONTEXT_H +#define _ASM_SIGCONTEXT_H + +#include <asm/sgidefs.h> + +#if _MIPS_SIM == _MIPS_SIM_ABI32 + +/* + * Keep this struct definition in sync with the sigcontext fragment + * in arch/mips/tools/offset.c + */ +struct sigcontext { + unsigned int sc_regmask; /* Unused */ + unsigned int sc_status; /* Unused */ + unsigned long long sc_pc; + unsigned long long sc_regs[32]; + unsigned long long sc_fpregs[32]; + unsigned int sc_acx; /* Was sc_ownedfp */ + unsigned int sc_fpc_csr; + unsigned int sc_fpc_eir; /* Unused */ + unsigned int sc_used_math; + unsigned int sc_dsp; /* dsp status, was sc_ssflags */ + unsigned long long sc_mdhi; + unsigned long long sc_mdlo; + unsigned long sc_hi1; /* Was sc_cause */ + unsigned long sc_lo1; /* Was sc_badvaddr */ + unsigned long sc_hi2; /* Was sc_sigset[4] */ + unsigned long sc_lo2; + unsigned long sc_hi3; + unsigned long sc_lo3; +}; + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ + +#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 + +#include <linux/posix_types.h> +/* + * Keep this struct definition in sync with the sigcontext fragment + * in arch/mips/tools/offset.c + * + * Warning: this structure illdefined with sc_badvaddr being just an unsigned + * int so it was changed to unsigned long in 2.6.0-test1. This may break + * binary compatibility - no prisoners. + * DSP ASE in 2.6.12-rc4. Turn sc_mdhi and sc_mdlo into an array of four + * entries, add sc_dsp and sc_reserved for padding. No prisoners. + */ +struct sigcontext { + __u64 sc_regs[32]; + __u64 sc_fpregs[32]; + __u64 sc_mdhi; + __u64 sc_hi1; + __u64 sc_hi2; + __u64 sc_hi3; + __u64 sc_mdlo; + __u64 sc_lo1; + __u64 sc_lo2; + __u64 sc_lo3; + __u64 sc_pc; + __u32 sc_fpc_csr; + __u32 sc_used_math; + __u32 sc_dsp; + __u32 sc_reserved; +}; + +#ifdef __KERNEL__ + +struct sigcontext32 { + __u32 sc_regmask; /* Unused */ + __u32 sc_status; /* Unused */ + __u64 sc_pc; + __u64 sc_regs[32]; + __u64 sc_fpregs[32]; + __u32 sc_acx; /* Only MIPS32; was sc_ownedfp */ + __u32 sc_fpc_csr; + __u32 sc_fpc_eir; /* Unused */ + __u32 sc_used_math; + __u32 sc_dsp; /* dsp status, was sc_ssflags */ + __u64 sc_mdhi; + __u64 sc_mdlo; + __u32 sc_hi1; /* Was sc_cause */ + __u32 sc_lo1; /* Was sc_badvaddr */ + __u32 sc_hi2; /* Was sc_sigset[4] */ + __u32 sc_lo2; + __u32 sc_hi3; + __u32 sc_lo3; +}; +#endif /* __KERNEL__ */ + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */ + +#endif /* _ASM_SIGCONTEXT_H */ diff --git a/arch/mips/include/asm/siginfo.h b/arch/mips/include/asm/siginfo.h new file mode 100644 index 000000000000..96e28f18dad1 --- /dev/null +++ b/arch/mips/include/asm/siginfo.h @@ -0,0 +1,130 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 1999, 2001, 2003 Ralf Baechle + * Copyright (C) 2000, 2001 Silicon Graphics, Inc. + */ +#ifndef _ASM_SIGINFO_H +#define _ASM_SIGINFO_H + + +#define __ARCH_SIGEV_PREAMBLE_SIZE (sizeof(long) + 2*sizeof(int)) +#undef __ARCH_SI_TRAPNO /* exception code needs to fill this ... */ + +#define HAVE_ARCH_SIGINFO_T + +/* + * We duplicate the generic versions - <asm-generic/siginfo.h> is just borked + * by design ... + */ +#define HAVE_ARCH_COPY_SIGINFO +struct siginfo; + +/* + * Careful to keep union _sifields from shifting ... + */ +#ifdef CONFIG_32BIT +#define __ARCH_SI_PREAMBLE_SIZE (3 * sizeof(int)) +#endif +#ifdef CONFIG_64BIT +#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) +#endif + +#include <asm-generic/siginfo.h> + +typedef struct siginfo { + int si_signo; + int si_code; + int si_errno; + int __pad0[SI_MAX_SIZE / sizeof(int) - SI_PAD_SIZE - 3]; + + union { + int _pad[SI_PAD_SIZE]; + + /* kill() */ + struct { + pid_t _pid; /* sender's pid */ + __ARCH_SI_UID_T _uid; /* sender's uid */ + } _kill; + + /* POSIX.1b timers */ + struct { + timer_t _tid; /* timer id */ + int _overrun; /* overrun count */ + char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)]; + sigval_t _sigval; /* same as below */ + int _sys_private; /* not to be passed to user */ + } _timer; + + /* POSIX.1b signals */ + struct { + pid_t _pid; /* sender's pid */ + __ARCH_SI_UID_T _uid; /* sender's uid */ + sigval_t _sigval; + } _rt; + + /* SIGCHLD */ + struct { + pid_t _pid; /* which child */ + __ARCH_SI_UID_T _uid; /* sender's uid */ + int _status; /* exit code */ + clock_t _utime; + clock_t _stime; + } _sigchld; + + /* IRIX SIGCHLD */ + struct { + pid_t _pid; /* which child */ + clock_t _utime; + int _status; /* exit code */ + clock_t _stime; + } _irix_sigchld; + + /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ + struct { + void __user *_addr; /* faulting insn/memory ref. */ +#ifdef __ARCH_SI_TRAPNO + int _trapno; /* TRAP # which caused the signal */ +#endif + } _sigfault; + + /* SIGPOLL, SIGXFSZ (To do ...) */ + struct { + __ARCH_SI_BAND_T _band; /* POLL_IN, POLL_OUT, POLL_MSG */ + int _fd; + } _sigpoll; + } _sifields; +} siginfo_t; + +/* + * si_code values + * Again these have been choosen to be IRIX compatible. + */ +#undef SI_ASYNCIO +#undef SI_TIMER +#undef SI_MESGQ +#define SI_ASYNCIO -2 /* sent by AIO completion */ +#define SI_TIMER __SI_CODE(__SI_TIMER, -3) /* sent by timer expiration */ +#define SI_MESGQ __SI_CODE(__SI_MESGQ, -4) /* sent by real time mesq state change */ + +#ifdef __KERNEL__ + +/* + * Duplicated here because of <asm-generic/siginfo.h> braindamage ... + */ +#include <linux/string.h> + +static inline void copy_siginfo(struct siginfo *to, struct siginfo *from) +{ + if (from->si_code < 0) + memcpy(to, from, sizeof(*to)); + else + /* _sigchld is currently the largest know union member */ + memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld)); +} + +#endif + +#endif /* _ASM_SIGINFO_H */ diff --git a/arch/mips/include/asm/signal.h b/arch/mips/include/asm/signal.h new file mode 100644 index 000000000000..bee5153aca48 --- /dev/null +++ b/arch/mips/include/asm/signal.h @@ -0,0 +1,139 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 97, 98, 99, 2003 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_SIGNAL_H +#define _ASM_SIGNAL_H + +#include <linux/types.h> + +#define _NSIG 128 +#define _NSIG_BPW (sizeof(unsigned long) * 8) +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +#define SIGHUP 1 /* Hangup (POSIX). */ +#define SIGINT 2 /* Interrupt (ANSI). */ +#define SIGQUIT 3 /* Quit (POSIX). */ +#define SIGILL 4 /* Illegal instruction (ANSI). */ +#define SIGTRAP 5 /* Trace trap (POSIX). */ +#define SIGIOT 6 /* IOT trap (4.2 BSD). */ +#define SIGABRT SIGIOT /* Abort (ANSI). */ +#define SIGEMT 7 +#define SIGFPE 8 /* Floating-point exception (ANSI). */ +#define SIGKILL 9 /* Kill, unblockable (POSIX). */ +#define SIGBUS 10 /* BUS error (4.2 BSD). */ +#define SIGSEGV 11 /* Segmentation violation (ANSI). */ +#define SIGSYS 12 +#define SIGPIPE 13 /* Broken pipe (POSIX). */ +#define SIGALRM 14 /* Alarm clock (POSIX). */ +#define SIGTERM 15 /* Termination (ANSI). */ +#define SIGUSR1 16 /* User-defined signal 1 (POSIX). */ +#define SIGUSR2 17 /* User-defined signal 2 (POSIX). */ +#define SIGCHLD 18 /* Child status has changed (POSIX). */ +#define SIGCLD SIGCHLD /* Same as SIGCHLD (System V). */ +#define SIGPWR 19 /* Power failure restart (System V). */ +#define SIGWINCH 20 /* Window size change (4.3 BSD, Sun). */ +#define SIGURG 21 /* Urgent condition on socket (4.2 BSD). */ +#define SIGIO 22 /* I/O now possible (4.2 BSD). */ +#define SIGPOLL SIGIO /* Pollable event occurred (System V). */ +#define SIGSTOP 23 /* Stop, unblockable (POSIX). */ +#define SIGTSTP 24 /* Keyboard stop (POSIX). */ +#define SIGCONT 25 /* Continue (POSIX). */ +#define SIGTTIN 26 /* Background read from tty (POSIX). */ +#define SIGTTOU 27 /* Background write to tty (POSIX). */ +#define SIGVTALRM 28 /* Virtual alarm clock (4.2 BSD). */ +#define SIGPROF 29 /* Profiling alarm clock (4.2 BSD). */ +#define SIGXCPU 30 /* CPU limit exceeded (4.2 BSD). */ +#define SIGXFSZ 31 /* File size limit exceeded (4.2 BSD). */ + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_ONSTACK 0x08000000 +#define SA_RESETHAND 0x80000000 +#define SA_RESTART 0x10000000 +#define SA_SIGINFO 0x00000008 +#define SA_NODEFER 0x40000000 +#define SA_NOCLDWAIT 0x00010000 +#define SA_NOCLDSTOP 0x00000001 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 /* Only for o32 */ + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#ifdef __KERNEL__ + +#ifdef CONFIG_TRAD_SIGNALS +#define sig_uses_siginfo(ka) ((ka)->sa.sa_flags & SA_SIGINFO) +#else +#define sig_uses_siginfo(ka) (1) +#endif + +#endif /* __KERNEL__ */ + +#define SIG_BLOCK 1 /* for blocking signals */ +#define SIG_UNBLOCK 2 /* for unblocking signals */ +#define SIG_SETMASK 3 /* for setting the signal mask */ + +#include <asm-generic/signal.h> + +struct sigaction { + unsigned int sa_flags; + __sighandler_t sa_handler; + sigset_t sa_mask; +}; + +struct k_sigaction { + struct sigaction sa; +}; + +/* IRIX compatible stack_t */ +typedef struct sigaltstack { + void __user *ss_sp; + size_t ss_size; + int ss_flags; +} stack_t; + +#ifdef __KERNEL__ +#include <asm/sigcontext.h> +#include <asm/siginfo.h> + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_SIGNAL_H */ diff --git a/arch/mips/include/asm/sim.h b/arch/mips/include/asm/sim.h new file mode 100644 index 000000000000..0cd719fabb51 --- /dev/null +++ b/arch/mips/include/asm/sim.h @@ -0,0 +1,82 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999, 2000, 2003 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_SIM_H +#define _ASM_SIM_H + + +#include <asm/asm-offsets.h> + +#define __str2(x) #x +#define __str(x) __str2(x) + +#ifdef CONFIG_32BIT + +#define save_static_function(symbol) \ +__asm__( \ + ".text\n\t" \ + ".globl\t" #symbol "\n\t" \ + ".align\t2\n\t" \ + ".type\t" #symbol ", @function\n\t" \ + ".ent\t" #symbol ", 0\n" \ + #symbol":\n\t" \ + ".frame\t$29, 0, $31\n\t" \ + "sw\t$16,"__str(PT_R16)"($29)\t\t\t# save_static_function\n\t" \ + "sw\t$17,"__str(PT_R17)"($29)\n\t" \ + "sw\t$18,"__str(PT_R18)"($29)\n\t" \ + "sw\t$19,"__str(PT_R19)"($29)\n\t" \ + "sw\t$20,"__str(PT_R20)"($29)\n\t" \ + "sw\t$21,"__str(PT_R21)"($29)\n\t" \ + "sw\t$22,"__str(PT_R22)"($29)\n\t" \ + "sw\t$23,"__str(PT_R23)"($29)\n\t" \ + "sw\t$30,"__str(PT_R30)"($29)\n\t" \ + "j\t_" #symbol "\n\t" \ + ".end\t" #symbol "\n\t" \ + ".size\t" #symbol",. - " #symbol) + +#define nabi_no_regargs + +#endif /* CONFIG_32BIT */ + +#ifdef CONFIG_64BIT + +#define save_static_function(symbol) \ +__asm__( \ + ".text\n\t" \ + ".globl\t" #symbol "\n\t" \ + ".align\t2\n\t" \ + ".type\t" #symbol ", @function\n\t" \ + ".ent\t" #symbol ", 0\n" \ + #symbol":\n\t" \ + ".frame\t$29, 0, $31\n\t" \ + "sd\t$16,"__str(PT_R16)"($29)\t\t\t# save_static_function\n\t" \ + "sd\t$17,"__str(PT_R17)"($29)\n\t" \ + "sd\t$18,"__str(PT_R18)"($29)\n\t" \ + "sd\t$19,"__str(PT_R19)"($29)\n\t" \ + "sd\t$20,"__str(PT_R20)"($29)\n\t" \ + "sd\t$21,"__str(PT_R21)"($29)\n\t" \ + "sd\t$22,"__str(PT_R22)"($29)\n\t" \ + "sd\t$23,"__str(PT_R23)"($29)\n\t" \ + "sd\t$30,"__str(PT_R30)"($29)\n\t" \ + "j\t_" #symbol "\n\t" \ + ".end\t" #symbol "\n\t" \ + ".size\t" #symbol",. - " #symbol) + +#define nabi_no_regargs \ + unsigned long __dummy0, \ + unsigned long __dummy1, \ + unsigned long __dummy2, \ + unsigned long __dummy3, \ + unsigned long __dummy4, \ + unsigned long __dummy5, \ + unsigned long __dummy6, \ + unsigned long __dummy7, + +#endif /* CONFIG_64BIT */ + +#endif /* _ASM_SIM_H */ diff --git a/arch/mips/include/asm/smp-ops.h b/arch/mips/include/asm/smp-ops.h new file mode 100644 index 000000000000..43c207e72a63 --- /dev/null +++ b/arch/mips/include/asm/smp-ops.h @@ -0,0 +1,57 @@ +/* + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com) + * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc. + * Copyright (C) 2000, 2001, 2002 Ralf Baechle + * Copyright (C) 2000, 2001 Broadcom Corporation + */ +#ifndef __ASM_SMP_OPS_H +#define __ASM_SMP_OPS_H + +#ifdef CONFIG_SMP + +#include <linux/cpumask.h> + +struct plat_smp_ops { + void (*send_ipi_single)(int cpu, unsigned int action); + void (*send_ipi_mask)(cpumask_t mask, unsigned int action); + void (*init_secondary)(void); + void (*smp_finish)(void); + void (*cpus_done)(void); + void (*boot_secondary)(int cpu, struct task_struct *idle); + void (*smp_setup)(void); + void (*prepare_cpus)(unsigned int max_cpus); +}; + +extern void register_smp_ops(struct plat_smp_ops *ops); + +static inline void plat_smp_setup(void) +{ + extern struct plat_smp_ops *mp_ops; /* private */ + + mp_ops->smp_setup(); +} + +#else /* !CONFIG_SMP */ + +struct plat_smp_ops; + +static inline void plat_smp_setup(void) +{ + /* UP, nothing to do ... */ +} + +static inline void register_smp_ops(struct plat_smp_ops *ops) +{ +} + +#endif /* !CONFIG_SMP */ + +extern struct plat_smp_ops up_smp_ops; +extern struct plat_smp_ops cmp_smp_ops; +extern struct plat_smp_ops vsmp_smp_ops; + +#endif /* __ASM_SMP_OPS_H */ diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h new file mode 100644 index 000000000000..0ff5b523ea77 --- /dev/null +++ b/arch/mips/include/asm/smp.h @@ -0,0 +1,63 @@ +/* + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com) + * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc. + * Copyright (C) 2000, 2001, 2002 Ralf Baechle + * Copyright (C) 2000, 2001 Broadcom Corporation + */ +#ifndef __ASM_SMP_H +#define __ASM_SMP_H + +#include <linux/bitops.h> +#include <linux/linkage.h> +#include <linux/threads.h> +#include <linux/cpumask.h> + +#include <asm/atomic.h> +#include <asm/smp-ops.h> + +extern int smp_num_siblings; +extern cpumask_t cpu_sibling_map[]; + +#define raw_smp_processor_id() (current_thread_info()->cpu) + +/* Map from cpu id to sequential logical cpu number. This will only + not be idempotent when cpus failed to come on-line. */ +extern int __cpu_number_map[NR_CPUS]; +#define cpu_number_map(cpu) __cpu_number_map[cpu] + +/* The reverse map from sequential logical cpu number to cpu id. */ +extern int __cpu_logical_map[NR_CPUS]; +#define cpu_logical_map(cpu) __cpu_logical_map[cpu] + +#define NO_PROC_ID (-1) + +#define SMP_RESCHEDULE_YOURSELF 0x1 /* XXX braindead */ +#define SMP_CALL_FUNCTION 0x2 + +extern cpumask_t phys_cpu_present_map; +#define cpu_possible_map phys_cpu_present_map + +extern void asmlinkage smp_bootstrap(void); + +/* + * this function sends a 'reschedule' IPI to another CPU. + * it goes straight through and wastes no time serializing + * anything. Worst case is that we lose a reschedule ... + */ +static inline void smp_send_reschedule(int cpu) +{ + extern struct plat_smp_ops *mp_ops; /* private */ + + mp_ops->send_ipi_single(cpu, SMP_RESCHEDULE_YOURSELF); +} + +extern asmlinkage void smp_call_function_interrupt(void); + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi(cpumask_t mask); + +#endif /* __ASM_SMP_H */ diff --git a/arch/mips/include/asm/smtc.h b/arch/mips/include/asm/smtc.h new file mode 100644 index 000000000000..ea60bf08dcb0 --- /dev/null +++ b/arch/mips/include/asm/smtc.h @@ -0,0 +1,71 @@ +#ifndef _ASM_SMTC_MT_H +#define _ASM_SMTC_MT_H + +/* + * Definitions for SMTC multitasking on MIPS MT cores + */ + +#include <asm/mips_mt.h> +#include <asm/smtc_ipi.h> + +/* + * System-wide SMTC status information + */ + +extern unsigned int smtc_status; + +#define SMTC_TLB_SHARED 0x00000001 +#define SMTC_MTC_ACTIVE 0x00000002 + +/* + * TLB/ASID Management information + */ + +#define MAX_SMTC_TLBS 2 +#define MAX_SMTC_ASIDS 256 +#if NR_CPUS <= 8 +typedef char asiduse; +#else +#if NR_CPUS <= 16 +typedef short asiduse; +#else +typedef long asiduse; +#endif +#endif + +extern asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS]; + +struct mm_struct; +struct task_struct; + +void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu); +void self_ipi(struct smtc_ipi *); +void smtc_flush_tlb_asid(unsigned long asid); +extern int smtc_build_cpu_map(int startslot); +extern void smtc_prepare_cpus(int cpus); +extern void smtc_smp_finish(void); +extern void smtc_boot_secondary(int cpu, struct task_struct *t); +extern void smtc_cpus_done(void); + + +/* + * Sharing the TLB between multiple VPEs means that the + * "random" index selection function is not allowed to + * select the current value of the Index register. To + * avoid additional TLB pressure, the Index registers + * are "parked" with an non-Valid value. + */ + +#define PARKED_INDEX ((unsigned int)0x80000000) + +/* + * Define low-level interrupt mask for IPIs, if necessary. + * By default, use SW interrupt 1, which requires no external + * hardware support, but which works only for single-core + * MIPS MT systems. + */ +#ifndef MIPS_CPU_IPI_IRQ +#define MIPS_CPU_IPI_IRQ 1 +#endif + +#endif /* _ASM_SMTC_MT_H */ diff --git a/arch/mips/include/asm/smtc_ipi.h b/arch/mips/include/asm/smtc_ipi.h new file mode 100644 index 000000000000..8ce517574340 --- /dev/null +++ b/arch/mips/include/asm/smtc_ipi.h @@ -0,0 +1,128 @@ +/* + * Definitions used in MIPS MT SMTC "Interprocessor Interrupt" code. + */ +#ifndef __ASM_SMTC_IPI_H +#define __ASM_SMTC_IPI_H + +#include <linux/spinlock.h> + +//#define SMTC_IPI_DEBUG + +#ifdef SMTC_IPI_DEBUG +#include <asm/mipsregs.h> +#include <asm/mipsmtregs.h> +#endif /* SMTC_IPI_DEBUG */ + +/* + * An IPI "message" + */ + +struct smtc_ipi { + struct smtc_ipi *flink; + int type; + void *arg; + int dest; +#ifdef SMTC_IPI_DEBUG + int sender; + long stamp; +#endif /* SMTC_IPI_DEBUG */ +}; + +/* + * Defined IPI Types + */ + +#define LINUX_SMP_IPI 1 +#define SMTC_CLOCK_TICK 2 +#define IRQ_AFFINITY_IPI 3 + +/* + * A queue of IPI messages + */ + +struct smtc_ipi_q { + struct smtc_ipi *head; + spinlock_t lock; + struct smtc_ipi *tail; + int depth; +}; + +static inline void smtc_ipi_nq(struct smtc_ipi_q *q, struct smtc_ipi *p) +{ + unsigned long flags; + + spin_lock_irqsave(&q->lock, flags); + if (q->head == NULL) + q->head = q->tail = p; + else + q->tail->flink = p; + p->flink = NULL; + q->tail = p; + q->depth++; +#ifdef SMTC_IPI_DEBUG + p->sender = read_c0_tcbind(); + p->stamp = read_c0_count(); +#endif /* SMTC_IPI_DEBUG */ + spin_unlock_irqrestore(&q->lock, flags); +} + +static inline struct smtc_ipi *__smtc_ipi_dq(struct smtc_ipi_q *q) +{ + struct smtc_ipi *p; + + if (q->head == NULL) + p = NULL; + else { + p = q->head; + q->head = q->head->flink; + q->depth--; + /* Arguably unnecessary, but leaves queue cleaner */ + if (q->head == NULL) + q->tail = NULL; + } + + return p; +} + +static inline struct smtc_ipi *smtc_ipi_dq(struct smtc_ipi_q *q) +{ + unsigned long flags; + struct smtc_ipi *p; + + spin_lock_irqsave(&q->lock, flags); + p = __smtc_ipi_dq(q); + spin_unlock_irqrestore(&q->lock, flags); + + return p; +} + +static inline void smtc_ipi_req(struct smtc_ipi_q *q, struct smtc_ipi *p) +{ + unsigned long flags; + + spin_lock_irqsave(&q->lock, flags); + if (q->head == NULL) { + q->head = q->tail = p; + p->flink = NULL; + } else { + p->flink = q->head; + q->head = p; + } + q->depth++; + spin_unlock_irqrestore(&q->lock, flags); +} + +static inline int smtc_ipi_qdepth(struct smtc_ipi_q *q) +{ + unsigned long flags; + int retval; + + spin_lock_irqsave(&q->lock, flags); + retval = q->depth; + spin_unlock_irqrestore(&q->lock, flags); + return retval; +} + +extern void smtc_send_ipi(int cpu, int type, unsigned int action); + +#endif /* __ASM_SMTC_IPI_H */ diff --git a/arch/mips/include/asm/smtc_proc.h b/arch/mips/include/asm/smtc_proc.h new file mode 100644 index 000000000000..25da651f1f5f --- /dev/null +++ b/arch/mips/include/asm/smtc_proc.h @@ -0,0 +1,23 @@ +/* + * Definitions for SMTC /proc entries + * Copyright(C) 2005 MIPS Technologies Inc. + */ +#ifndef __ASM_SMTC_PROC_H +#define __ASM_SMTC_PROC_H + +/* + * per-"CPU" statistics + */ + +struct smtc_cpu_proc { + unsigned long timerints; + unsigned long selfipis; +}; + +extern struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS]; + +/* Count of number of recoveries of "stolen" FPU access rights on 34K */ + +extern atomic_t smtc_fpu_recoveries; + +#endif /* __ASM_SMTC_PROC_H */ diff --git a/arch/mips/include/asm/smvp.h b/arch/mips/include/asm/smvp.h new file mode 100644 index 000000000000..0d0e80a39e8a --- /dev/null +++ b/arch/mips/include/asm/smvp.h @@ -0,0 +1,19 @@ +#ifndef _ASM_SMVP_H +#define _ASM_SMVP_H + +/* + * Definitions for SMVP multitasking on MIPS MT cores + */ +struct task_struct; + +extern void smvp_smp_setup(void); +extern void smvp_smp_finish(void); +extern void smvp_boot_secondary(int cpu, struct task_struct *t); +extern void smvp_init_secondary(void); +extern void smvp_smp_finish(void); +extern void smvp_cpus_done(void); +extern void smvp_prepare_cpus(unsigned int max_cpus); + +/* This is platform specific */ +extern void smvp_send_ipi(int cpu, unsigned int action); +#endif /* _ASM_SMVP_H */ diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h new file mode 100644 index 000000000000..fec9bdd34913 --- /dev/null +++ b/arch/mips/include/asm/sn/addrs.h @@ -0,0 +1,430 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 1999, 2000 by Ralf Baechle + */ +#ifndef _ASM_SN_ADDRS_H +#define _ASM_SN_ADDRS_H + + +#ifndef __ASSEMBLY__ +#include <linux/types.h> +#endif /* !__ASSEMBLY__ */ + +#include <asm/addrspace.h> +#include <asm/sn/kldir.h> + +#if defined(CONFIG_SGI_IP27) +#include <asm/sn/sn0/addrs.h> +#elif defined(CONFIG_SGI_IP35) +#include <asm/sn/sn1/addrs.h> +#endif + + +#ifndef __ASSEMBLY__ + +#define PS_UINT_CAST (unsigned long) +#define UINT64_CAST (unsigned long) + +#define HUBREG_CAST (volatile hubreg_t *) + +#else /* __ASSEMBLY__ */ + +#define PS_UINT_CAST +#define UINT64_CAST +#define HUBREG_CAST + +#endif /* __ASSEMBLY__ */ + + +#define NASID_GET_META(_n) ((_n) >> NASID_LOCAL_BITS) +#ifdef CONFIG_SGI_IP27 +#define NASID_GET_LOCAL(_n) ((_n) & 0xf) +#endif +#define NASID_MAKE(_m, _l) (((_m) << NASID_LOCAL_BITS) | (_l)) + +#define NODE_ADDRSPACE_MASK (NODE_ADDRSPACE_SIZE - 1) +#define TO_NODE_ADDRSPACE(_pa) (UINT64_CAST (_pa) & NODE_ADDRSPACE_MASK) + +#define CHANGE_ADDR_NASID(_pa, _nasid) \ + ((UINT64_CAST(_pa) & ~NASID_MASK) | \ + (UINT64_CAST(_nasid) << NASID_SHFT)) + + +/* + * The following macros are used to index to the beginning of a specific + * node's address space. + */ + +#define NODE_OFFSET(_n) (UINT64_CAST (_n) << NODE_SIZE_BITS) + +#define NODE_CAC_BASE(_n) (CAC_BASE + NODE_OFFSET(_n)) +#define NODE_HSPEC_BASE(_n) (HSPEC_BASE + NODE_OFFSET(_n)) +#define NODE_IO_BASE(_n) (IO_BASE + NODE_OFFSET(_n)) +#define NODE_MSPEC_BASE(_n) (MSPEC_BASE + NODE_OFFSET(_n)) +#define NODE_UNCAC_BASE(_n) (UNCAC_BASE + NODE_OFFSET(_n)) + +#define TO_NODE(_n, _x) (NODE_OFFSET(_n) | ((_x) )) +#define TO_NODE_CAC(_n, _x) (NODE_CAC_BASE(_n) | ((_x) & TO_PHYS_MASK)) +#define TO_NODE_UNCAC(_n, _x) (NODE_UNCAC_BASE(_n) | ((_x) & TO_PHYS_MASK)) +#define TO_NODE_MSPEC(_n, _x) (NODE_MSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK)) +#define TO_NODE_HSPEC(_n, _x) (NODE_HSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK)) + + +#define RAW_NODE_SWIN_BASE(nasid, widget) \ + (NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS)) + +#define WIDGETID_GET(addr) ((unsigned char)((addr >> SWIN_SIZE_BITS) & 0xff)) + +/* + * The following definitions pertain to the IO special address + * space. They define the location of the big and little windows + * of any given node. + */ + +#define SWIN_SIZE_BITS 24 +#define SWIN_SIZE (UINT64_CAST 1 << 24) +#define SWIN_SIZEMASK (SWIN_SIZE - 1) +#define SWIN_WIDGET_MASK 0xF + +/* + * Convert smallwindow address to xtalk address. + * + * 'addr' can be physical or virtual address, but will be converted + * to Xtalk address in the range 0 -> SWINZ_SIZEMASK + */ +#define SWIN_WIDGETADDR(addr) ((addr) & SWIN_SIZEMASK) +#define SWIN_WIDGETNUM(addr) (((addr) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK) +/* + * Verify if addr belongs to small window address on node with "nasid" + * + * + * NOTE: "addr" is expected to be XKPHYS address, and NOT physical + * address + * + * + */ +#define NODE_SWIN_ADDR(nasid, addr) \ + (((addr) >= NODE_SWIN_BASE(nasid, 0)) && \ + ((addr) < (NODE_SWIN_BASE(nasid, HUB_NUM_WIDGET) + SWIN_SIZE)\ + )) + +/* + * The following define the major position-independent aliases used + * in SN. + * UALIAS -- 256MB in size, reads in the UALIAS result in + * uncached references to the memory of the reader's node. + * CPU_UALIAS -- 128kb in size, the bottom part of UALIAS is flipped + * depending on which CPU does the access to provide + * all CPUs with unique uncached memory at low addresses. + * LBOOT -- 256MB in size, reads in the LBOOT area result in + * uncached references to the local hub's boot prom and + * other directory-bus connected devices. + * IALIAS -- 8MB in size, reads in the IALIAS result in uncached + * references to the local hub's registers. + */ + +#define UALIAS_BASE HSPEC_BASE +#define UALIAS_SIZE 0x10000000 /* 256 Megabytes */ +#define UALIAS_LIMIT (UALIAS_BASE + UALIAS_SIZE) + +/* + * The bottom of ualias space is flipped depending on whether you're + * processor 0 or 1 within a node. + */ +#ifdef CONFIG_SGI_IP27 +#define UALIAS_FLIP_BASE UALIAS_BASE +#define UALIAS_FLIP_SIZE 0x20000 +#define UALIAS_FLIP_BIT 0x10000 +#define UALIAS_FLIP_ADDR(_x) (cputoslice(smp_processor_id()) ? \ + (_x) ^ UALIAS_FLIP_BIT : (_x)) + +#define LBOOT_BASE (HSPEC_BASE + 0x10000000) +#define LBOOT_SIZE 0x10000000 +#define LBOOT_LIMIT (LBOOT_BASE + LBOOT_SIZE) +#define LBOOT_STRIDE 0 /* IP27 has only one CPU PROM */ + +#endif + +#define HUB_REGISTER_WIDGET 1 +#define IALIAS_BASE NODE_SWIN_BASE(0, HUB_REGISTER_WIDGET) +#define IALIAS_SIZE 0x800000 /* 8 Megabytes */ +#define IS_IALIAS(_a) (((_a) >= IALIAS_BASE) && \ + ((_a) < (IALIAS_BASE + IALIAS_SIZE))) + +/* + * Macro for referring to Hub's RBOOT space + */ + +#ifdef CONFIG_SGI_IP27 +#define RBOOT_SIZE 0x10000000 /* 256 Megabytes */ +#define NODE_RBOOT_BASE(_n) (NODE_HSPEC_BASE(_n) + 0x30000000) +#define NODE_RBOOT_LIMIT(_n) (NODE_RBOOT_BASE(_n) + RBOOT_SIZE) + +#endif + +/* + * Macros for referring the Hub's back door space + * + * These macros correctly process addresses in any node's space. + * WARNING: They won't work in assembler. + * + * BDDIR_ENTRY_LO returns the address of the low double-word of the dir + * entry corresponding to a physical (Cac or Uncac) address. + * BDDIR_ENTRY_HI returns the address of the high double-word of the entry. + * BDPRT_ENTRY returns the address of the double-word protection entry + * corresponding to the page containing the physical address. + * BDPRT_ENTRY_S Stores the value into the protection entry. + * BDPRT_ENTRY_L Load the value from the protection entry. + * BDECC_ENTRY returns the address of the ECC byte corresponding to a + * double-word at a specified physical address. + * BDECC_ENTRY_H returns the address of the two ECC bytes corresponding to a + * quad-word at a specified physical address. + */ +#define NODE_BDOOR_BASE(_n) (NODE_HSPEC_BASE(_n) + (NODE_ADDRSPACE_SIZE/2)) + +#define NODE_BDECC_BASE(_n) (NODE_BDOOR_BASE(_n)) +#define NODE_BDDIR_BASE(_n) (NODE_BDOOR_BASE(_n) + (NODE_ADDRSPACE_SIZE/4)) +#ifdef CONFIG_SGI_IP27 +#define BDDIR_ENTRY_LO(_pa) ((HSPEC_BASE + \ + NODE_ADDRSPACE_SIZE * 3 / 4 + \ + 0x200) | \ + UINT64_CAST(_pa) & NASID_MASK | \ + UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK | \ + UINT64_CAST(_pa) >> 3 & 0x1f << 4) + +#define BDDIR_ENTRY_HI(_pa) ((HSPEC_BASE + \ + NODE_ADDRSPACE_SIZE * 3 / 4 + \ + 0x208) | \ + UINT64_CAST(_pa) & NASID_MASK | \ + UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK | \ + UINT64_CAST(_pa) >> 3 & 0x1f << 4) + +#define BDPRT_ENTRY(_pa, _rgn) ((HSPEC_BASE + \ + NODE_ADDRSPACE_SIZE * 3 / 4) | \ + UINT64_CAST(_pa) & NASID_MASK | \ + UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK | \ + (_rgn) << 3) +#define BDPRT_ENTRY_ADDR(_pa, _rgn) (BDPRT_ENTRY((_pa), (_rgn))) +#define BDPRT_ENTRY_S(_pa, _rgn, _val) (*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn))=(_val)) +#define BDPRT_ENTRY_L(_pa, _rgn) (*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn))) + +#define BDECC_ENTRY(_pa) ((HSPEC_BASE + \ + NODE_ADDRSPACE_SIZE / 2) | \ + UINT64_CAST(_pa) & NASID_MASK | \ + UINT64_CAST(_pa) >> 2 & BDECC_UPPER_MASK | \ + UINT64_CAST(_pa) >> 3 & 3) + +/* + * Macro to convert a back door directory or protection address into the + * raw physical address of the associated cache line or protection page. + */ +#define BDADDR_IS_DIR(_ba) ((UINT64_CAST (_ba) & 0x200) != 0) +#define BDADDR_IS_PRT(_ba) ((UINT64_CAST (_ba) & 0x200) == 0) + +#define BDDIR_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ + (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2 | \ + (UINT64_CAST(_ba) & 0x1f << 4) << 3) + +#define BDPRT_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ + (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2) + +#define BDECC_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ + (UINT64_CAST(_ba) & BDECC_UPPER_MASK)<<2 | \ + (UINT64_CAST(_ba) & 3) << 3) +#endif /* CONFIG_SGI_IP27 */ + + +/* + * The following macros produce the correct base virtual address for + * the hub registers. The LOCAL_HUB_* macros produce the appropriate + * address for the local registers. The REMOTE_HUB_* macro produce + * the address for the specified hub's registers. The intent is + * that the appropriate PI, MD, NI, or II register would be substituted + * for _x. + */ + +/* + * WARNING: + * When certain Hub chip workaround are defined, it's not sufficient + * to dereference the *_HUB_ADDR() macros. You should instead use + * HUB_L() and HUB_S() if you must deal with pointers to hub registers. + * Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S(). + * They're always safe. + */ +#define LOCAL_HUB_ADDR(_x) (HUBREG_CAST (IALIAS_BASE + (_x))) +#define REMOTE_HUB_ADDR(_n, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ + 0x800000 + (_x))) +#ifdef CONFIG_SGI_IP27 +#define REMOTE_HUB_PI_ADDR(_n, _sn, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ + 0x800000 + (_x))) +#endif /* CONFIG_SGI_IP27 */ + +#ifndef __ASSEMBLY__ + +#define HUB_L(_a) *(_a) +#define HUB_S(_a, _d) *(_a) = (_d) + +#define LOCAL_HUB_L(_r) HUB_L(LOCAL_HUB_ADDR(_r)) +#define LOCAL_HUB_S(_r, _d) HUB_S(LOCAL_HUB_ADDR(_r), (_d)) +#define REMOTE_HUB_L(_n, _r) HUB_L(REMOTE_HUB_ADDR((_n), (_r))) +#define REMOTE_HUB_S(_n, _r, _d) HUB_S(REMOTE_HUB_ADDR((_n), (_r)), (_d)) +#define REMOTE_HUB_PI_L(_n, _sn, _r) HUB_L(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r))) +#define REMOTE_HUB_PI_S(_n, _sn, _r, _d) HUB_S(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r)), (_d)) + +#endif /* !__ASSEMBLY__ */ + +/* + * The following macros are used to get to a hub/bridge register, given + * the base of the register space. + */ +#define HUB_REG_PTR(_base, _off) \ + (HUBREG_CAST((__psunsigned_t)(_base) + (__psunsigned_t)(_off))) + +#define HUB_REG_PTR_L(_base, _off) \ + HUB_L(HUB_REG_PTR((_base), (_off))) + +#define HUB_REG_PTR_S(_base, _off, _data) \ + HUB_S(HUB_REG_PTR((_base), (_off)), (_data)) + +/* + * Software structure locations -- permanently fixed + * See diagram in kldir.h + */ + +#define PHYS_RAMBASE 0x0 +#define K0_RAMBASE PHYS_TO_K0(PHYS_RAMBASE) + +#define EX_HANDLER_OFFSET(slice) ((slice) << 16) +#define EX_HANDLER_ADDR(nasid, slice) \ + PHYS_TO_K0(NODE_OFFSET(nasid) | EX_HANDLER_OFFSET(slice)) +#define EX_HANDLER_SIZE 0x0400 + +#define EX_FRAME_OFFSET(slice) ((slice) << 16 | 0x400) +#define EX_FRAME_ADDR(nasid, slice) \ + PHYS_TO_K0(NODE_OFFSET(nasid) | EX_FRAME_OFFSET(slice)) +#define EX_FRAME_SIZE 0x0c00 + +#define ARCS_SPB_OFFSET 0x1000 +#define ARCS_SPB_ADDR(nasid) \ + PHYS_TO_K0(NODE_OFFSET(nasid) | ARCS_SPB_OFFSET) +#define ARCS_SPB_SIZE 0x0400 + +#define KLDIR_OFFSET 0x2000 +#define KLDIR_ADDR(nasid) \ + TO_NODE_UNCAC((nasid), KLDIR_OFFSET) +#define KLDIR_SIZE 0x0400 + + +/* + * Software structure locations -- indirected through KLDIR + * See diagram in kldir.h + * + * Important: All low memory structures must only be accessed + * uncached, except for the symmon stacks. + */ + +#define KLI_LAUNCH 0 /* Dir. entries */ +#define KLI_KLCONFIG 1 +#define KLI_NMI 2 +#define KLI_GDA 3 +#define KLI_FREEMEM 4 +#define KLI_SYMMON_STK 5 +#define KLI_PI_ERROR 6 +#define KLI_KERN_VARS 7 +#define KLI_KERN_XP 8 +#define KLI_KERN_PARTID 9 + +#ifndef __ASSEMBLY__ + +#define KLD_BASE(nasid) ((kldir_ent_t *) KLDIR_ADDR(nasid)) +#define KLD_LAUNCH(nasid) (KLD_BASE(nasid) + KLI_LAUNCH) +#define KLD_NMI(nasid) (KLD_BASE(nasid) + KLI_NMI) +#define KLD_KLCONFIG(nasid) (KLD_BASE(nasid) + KLI_KLCONFIG) +#define KLD_PI_ERROR(nasid) (KLD_BASE(nasid) + KLI_PI_ERROR) +#define KLD_GDA(nasid) (KLD_BASE(nasid) + KLI_GDA) +#define KLD_SYMMON_STK(nasid) (KLD_BASE(nasid) + KLI_SYMMON_STK) +#define KLD_FREEMEM(nasid) (KLD_BASE(nasid) + KLI_FREEMEM) +#define KLD_KERN_VARS(nasid) (KLD_BASE(nasid) + KLI_KERN_VARS) +#define KLD_KERN_XP(nasid) (KLD_BASE(nasid) + KLI_KERN_XP) +#define KLD_KERN_PARTID(nasid) (KLD_BASE(nasid) + KLI_KERN_PARTID) + +#define LAUNCH_OFFSET(nasid, slice) \ + (KLD_LAUNCH(nasid)->offset + \ + KLD_LAUNCH(nasid)->stride * (slice)) +#define LAUNCH_ADDR(nasid, slice) \ + TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice)) +#define LAUNCH_SIZE(nasid) KLD_LAUNCH(nasid)->size + +#define NMI_OFFSET(nasid, slice) \ + (KLD_NMI(nasid)->offset + \ + KLD_NMI(nasid)->stride * (slice)) +#define NMI_ADDR(nasid, slice) \ + TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice)) +#define NMI_SIZE(nasid) KLD_NMI(nasid)->size + +#define KLCONFIG_OFFSET(nasid) KLD_KLCONFIG(nasid)->offset +#define KLCONFIG_ADDR(nasid) \ + TO_NODE_UNCAC((nasid), KLCONFIG_OFFSET(nasid)) +#define KLCONFIG_SIZE(nasid) KLD_KLCONFIG(nasid)->size + +#define GDA_ADDR(nasid) KLD_GDA(nasid)->pointer +#define GDA_SIZE(nasid) KLD_GDA(nasid)->size + +#define SYMMON_STK_OFFSET(nasid, slice) \ + (KLD_SYMMON_STK(nasid)->offset + \ + KLD_SYMMON_STK(nasid)->stride * (slice)) +#define SYMMON_STK_STRIDE(nasid) KLD_SYMMON_STK(nasid)->stride + +#define SYMMON_STK_ADDR(nasid, slice) \ + TO_NODE_CAC((nasid), SYMMON_STK_OFFSET(nasid, slice)) + +#define SYMMON_STK_SIZE(nasid) KLD_SYMMON_STK(nasid)->stride + +#define SYMMON_STK_END(nasid) (SYMMON_STK_ADDR(nasid, 0) + KLD_SYMMON_STK(nasid)->size) + +/* loading symmon 4k below UNIX. the arcs loader needs the topaddr for a + * relocatable program + */ +#define UNIX_DEBUG_LOADADDR 0x300000 +#define SYMMON_LOADADDR(nasid) \ + TO_NODE(nasid, PHYS_TO_K0(UNIX_DEBUG_LOADADDR - 0x1000)) + +#define FREEMEM_OFFSET(nasid) KLD_FREEMEM(nasid)->offset +#define FREEMEM_ADDR(nasid) SYMMON_STK_END(nasid) +/* + * XXX + * Fix this. FREEMEM_ADDR should be aware of if symmon is loaded. + * Also, it should take into account what prom thinks to be a safe + * address + PHYS_TO_K0(NODE_OFFSET(nasid) + FREEMEM_OFFSET(nasid)) + */ +#define FREEMEM_SIZE(nasid) KLD_FREEMEM(nasid)->size + +#define PI_ERROR_OFFSET(nasid) KLD_PI_ERROR(nasid)->offset +#define PI_ERROR_ADDR(nasid) \ + TO_NODE_UNCAC((nasid), PI_ERROR_OFFSET(nasid)) +#define PI_ERROR_SIZE(nasid) KLD_PI_ERROR(nasid)->size + +#define NODE_OFFSET_TO_K0(_nasid, _off) \ + PHYS_TO_K0((NODE_OFFSET(_nasid) + (_off)) | CAC_BASE) +#define NODE_OFFSET_TO_K1(_nasid, _off) \ + TO_UNCAC((NODE_OFFSET(_nasid) + (_off)) | UNCAC_BASE) +#define K0_TO_NODE_OFFSET(_k0addr) \ + ((__psunsigned_t)(_k0addr) & NODE_ADDRSPACE_MASK) + +#define KERN_VARS_ADDR(nasid) KLD_KERN_VARS(nasid)->pointer +#define KERN_VARS_SIZE(nasid) KLD_KERN_VARS(nasid)->size + +#define KERN_XP_ADDR(nasid) KLD_KERN_XP(nasid)->pointer +#define KERN_XP_SIZE(nasid) KLD_KERN_XP(nasid)->size + +#define GPDA_ADDR(nasid) TO_NODE_CAC(nasid, GPDA_OFFSET) + +#endif /* !__ASSEMBLY__ */ + + +#endif /* _ASM_SN_ADDRS_H */ diff --git a/arch/mips/include/asm/sn/agent.h b/arch/mips/include/asm/sn/agent.h new file mode 100644 index 000000000000..ac4ea85c3a5c --- /dev/null +++ b/arch/mips/include/asm/sn/agent.h @@ -0,0 +1,46 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * This file has definitions for the hub and snac interfaces. + * + * Copyright (C) 1992 - 1997, 1999, 2000 Silcon Graphics, Inc. + * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_SGI_SN_AGENT_H +#define _ASM_SGI_SN_AGENT_H + +#include <linux/topology.h> +#include <asm/sn/addrs.h> +#include <asm/sn/arch.h> + +#if defined(CONFIG_SGI_IP27) +#include <asm/sn/sn0/hub.h> +#elif defined(CONFIG_SGI_IP35) +#include <asm/sn/sn1/hub.h> +#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */ + +/* + * NIC register macros + */ + +#if defined(CONFIG_SGI_IP27) +#define HUB_NIC_ADDR(_cpuid) \ + REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)), \ + MD_MLAN_CTL) +#endif + +#define SET_HUB_NIC(_my_cpuid, _val) \ + (HUB_S(HUB_NIC_ADDR(_my_cpuid), (_val))) + +#define SET_MY_HUB_NIC(_v) \ + SET_HUB_NIC(cpuid(), (_v)) + +#define GET_HUB_NIC(_my_cpuid) \ + (HUB_L(HUB_NIC_ADDR(_my_cpuid))) + +#define GET_MY_HUB_NIC() \ + GET_HUB_NIC(cpuid()) + +#endif /* _ASM_SGI_SN_AGENT_H */ diff --git a/arch/mips/include/asm/sn/arch.h b/arch/mips/include/asm/sn/arch.h new file mode 100644 index 000000000000..bd75945e10ff --- /dev/null +++ b/arch/mips/include/asm/sn/arch.h @@ -0,0 +1,64 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * SGI specific setup. + * + * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc. + * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_SN_ARCH_H +#define _ASM_SN_ARCH_H + +#include <linux/types.h> +#include <asm/sn/types.h> +#ifdef CONFIG_SGI_IP27 +#include <asm/sn/sn0/arch.h> +#endif + +typedef u64 hubreg_t; + +#define cputonasid(cpu) (sn_cpu_info[(cpu)].p_nasid) +#define cputoslice(cpu) (sn_cpu_info[(cpu)].p_slice) +#define makespnum(_nasid, _slice) \ + (((_nasid) << CPUS_PER_NODE_SHFT) | (_slice)) + +#define INVALID_NASID (nasid_t)-1 +#define INVALID_CNODEID (cnodeid_t)-1 +#define INVALID_PNODEID (pnodeid_t)-1 +#define INVALID_MODULE (moduleid_t)-1 +#define INVALID_PARTID (partid_t)-1 + +extern nasid_t get_nasid(void); +extern cnodeid_t get_cpu_cnode(cpuid_t); +extern int get_cpu_slice(cpuid_t); + +/* + * NO ONE should access these arrays directly. The only reason we refer to + * them here is to avoid the procedure call that would be required in the + * macros below. (Really want private data members here :-) + */ +extern cnodeid_t nasid_to_compact_node[MAX_NASIDS]; +extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES]; + +/* + * These macros are used by various parts of the kernel to convert + * between the three different kinds of node numbering. At least some + * of them may change to procedure calls in the future, but the macros + * will continue to work. Don't use the arrays above directly. + */ + +#define NASID_TO_REGION(nnode) \ + ((nnode) >> \ + (is_fine_dirmode() ? NASID_TO_FINEREG_SHFT : NASID_TO_COARSEREG_SHFT)) + +extern cnodeid_t nasid_to_compact_node[MAX_NASIDS]; +extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES]; +extern cnodeid_t cpuid_to_compact_node[MAXCPUS]; + +#define NASID_TO_COMPACT_NODEID(nnode) (nasid_to_compact_node[nnode]) +#define COMPACT_TO_NASID_NODEID(cnode) (compact_to_nasid_node[cnode]) +#define CPUID_TO_COMPACT_NODEID(cpu) (cpuid_to_compact_node[(cpu)]) + +#endif /* _ASM_SN_ARCH_H */ diff --git a/arch/mips/include/asm/sn/fru.h b/arch/mips/include/asm/sn/fru.h new file mode 100644 index 000000000000..b3e3606723b7 --- /dev/null +++ b/arch/mips/include/asm/sn/fru.h @@ -0,0 +1,44 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX <sys/SN/SN0/sn0_fru.h> + * + * Copyright (C) 1992 - 1997, 1999 Silcon Graphics, Inc. + * Copyright (C) 1999, 2006 Ralf Baechle (ralf@linux-mips) + */ +#ifndef __ASM_SN_FRU_H +#define __ASM_SN_FRU_H + +#define MAX_DIMMS 8 /* max # of dimm banks */ +#define MAX_PCIDEV 8 /* max # of pci devices on a pci bus */ + +typedef unsigned char confidence_t; + +typedef struct kf_mem_s { + confidence_t km_confidence; /* confidence level that the memory is bad + * is this necessary ? + */ + confidence_t km_dimm[MAX_DIMMS]; + /* confidence level that dimm[i] is bad + *I think this is the right number + */ + +} kf_mem_t; + +typedef struct kf_cpu_s { + confidence_t kc_confidence; /* confidence level that cpu is bad */ + confidence_t kc_icache; /* confidence level that instr. cache is bad */ + confidence_t kc_dcache; /* confidence level that data cache is bad */ + confidence_t kc_scache; /* confidence level that sec. cache is bad */ + confidence_t kc_sysbus; /* confidence level that sysad/cmd/state bus is bad */ +} kf_cpu_t; + +typedef struct kf_pci_bus_s { + confidence_t kpb_belief; /* confidence level that the pci bus is bad */ + confidence_t kpb_pcidev_belief[MAX_PCIDEV]; + /* confidence level that the pci dev is bad */ +} kf_pci_bus_t; + +#endif /* __ASM_SN_FRU_H */ diff --git a/arch/mips/include/asm/sn/gda.h b/arch/mips/include/asm/sn/gda.h new file mode 100644 index 000000000000..9cb6ff770915 --- /dev/null +++ b/arch/mips/include/asm/sn/gda.h @@ -0,0 +1,107 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX <sys/SN/gda.h>. + * + * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc. + * + * gda.h -- Contains the data structure for the global data area, + * The GDA contains information communicated between the + * PROM, SYMMON, and the kernel. + */ +#ifndef _ASM_SN_GDA_H +#define _ASM_SN_GDA_H + +#include <asm/sn/addrs.h> + +#define GDA_MAGIC 0x58464552 + +/* + * GDA Version History + * + * Version # | Change + * -------------+------------------------------------------------------- + * 1 | Initial SN0 version + * 2 | Prom sets g_partid field to the partition number. 0 IS + * | a valid partition #. + */ + +#define GDA_VERSION 2 /* Current GDA version # */ + +#define G_MAGICOFF 0 +#define G_VERSIONOFF 4 +#define G_PROMOPOFF 6 +#define G_MASTEROFF 8 +#define G_VDSOFF 12 +#define G_HKDNORMOFF 16 +#define G_HKDUTLBOFF 24 +#define G_HKDXUTLBOFF 32 +#define G_PARTIDOFF 40 +#define G_TABLEOFF 128 + +#ifndef __ASSEMBLY__ + +typedef struct gda { + u32 g_magic; /* GDA magic number */ + u16 g_version; /* Version of this structure */ + u16 g_masterid; /* The NASID:CPUNUM of the master cpu */ + u32 g_promop; /* Passes requests from the kernel to prom */ + u32 g_vds; /* Store the virtual dipswitches here */ + void **g_hooked_norm;/* ptr to pda loc for norm hndlr */ + void **g_hooked_utlb;/* ptr to pda loc for utlb hndlr */ + void **g_hooked_xtlb;/* ptr to pda loc for xtlb hndlr */ + int g_partid; /* partition id */ + int g_symmax; /* Max symbols in name table. */ + void *g_dbstab; /* Address of idbg symbol table */ + char *g_nametab; /* Address of idbg name table */ + void *g_ktext_repmask; + /* Pointer to a mask of nodes with copies + * of the kernel. */ + char g_padding[56]; /* pad out to 128 bytes */ + nasid_t g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node, + * indexed by cnodeid. + */ +} gda_t; + +#define GDA ((gda_t*) GDA_ADDR(get_nasid())) + +#endif /* !__ASSEMBLY__ */ +/* + * Define: PART_GDA_VERSION + * Purpose: Define the minimum version of the GDA required, lower + * revisions assume GDA is NOT set up, and read partition + * information from the board info. + */ +#define PART_GDA_VERSION 2 + +/* + * The following requests can be sent to the PROM during startup. + */ + +#define PROMOP_MAGIC 0x0ead0000 +#define PROMOP_MAGIC_MASK 0x0fff0000 + +#define PROMOP_BIST_SHIFT 11 +#define PROMOP_BIST_MASK (0x3 << 11) + +#define PROMOP_REG PI_ERR_STACK_ADDR_A + +#define PROMOP_INVALID (PROMOP_MAGIC | 0x00) +#define PROMOP_HALT (PROMOP_MAGIC | 0x10) +#define PROMOP_POWERDOWN (PROMOP_MAGIC | 0x20) +#define PROMOP_RESTART (PROMOP_MAGIC | 0x30) +#define PROMOP_REBOOT (PROMOP_MAGIC | 0x40) +#define PROMOP_IMODE (PROMOP_MAGIC | 0x50) + +#define PROMOP_CMD_MASK 0x00f0 +#define PROMOP_OPTIONS_MASK 0xfff0 + +#define PROMOP_SKIP_DIAGS 0x0100 /* don't bother running diags */ +#define PROMOP_SKIP_MEMINIT 0x0200 /* don't bother initing memory */ +#define PROMOP_SKIP_DEVINIT 0x0400 /* don't bother initing devices */ +#define PROMOP_BIST1 0x0800 /* keep track of which BIST ran */ +#define PROMOP_BIST2 0x1000 /* keep track of which BIST ran */ + +#endif /* _ASM_SN_GDA_H */ diff --git a/arch/mips/include/asm/sn/hub.h b/arch/mips/include/asm/sn/hub.h new file mode 100644 index 000000000000..1992d9254a08 --- /dev/null +++ b/arch/mips/include/asm/sn/hub.h @@ -0,0 +1,16 @@ +#ifndef __ASM_SN_HUB_H +#define __ASM_SN_HUB_H + +#include <linux/types.h> +#include <linux/cpumask.h> +#include <asm/sn/types.h> +#include <asm/sn/io.h> +#include <asm/sn/klkernvars.h> +#include <asm/xtalk/xtalk.h> + +/* ip27-hubio.c */ +extern unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, + unsigned long xtalk_addr, size_t size); +extern void hub_pio_init(cnodeid_t cnode); + +#endif /* __ASM_SN_HUB_H */ diff --git a/arch/mips/include/asm/sn/intr.h b/arch/mips/include/asm/sn/intr.h new file mode 100644 index 000000000000..6718b644b970 --- /dev/null +++ b/arch/mips/include/asm/sn/intr.h @@ -0,0 +1,129 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997 Silicon Graphics, Inc. + */ +#ifndef __ASM_SN_INTR_H +#define __ASM_SN_INTR_H + +/* Number of interrupt levels associated with each interrupt register. */ +#define N_INTPEND_BITS 64 + +#define INT_PEND0_BASELVL 0 +#define INT_PEND1_BASELVL 64 + +#define N_INTPENDJUNK_BITS 8 +#define INTPENDJUNK_CLRBIT 0x80 + +/* + * Macros to manipulate the interrupt register on the calling hub chip. + */ + +#define LOCAL_HUB_SEND_INTR(level) \ + LOCAL_HUB_S(PI_INT_PEND_MOD, (0x100 | (level))) +#define REMOTE_HUB_SEND_INTR(hub, level) \ + REMOTE_HUB_S((hub), PI_INT_PEND_MOD, (0x100 | (level))) + +/* + * When clearing the interrupt, make sure this clear does make it + * to the hub. Otherwise we could end up losing interrupts. + * We do an uncached load of the int_pend0 register to ensure this. + */ + +#define LOCAL_HUB_CLR_INTR(level) \ +do { \ + LOCAL_HUB_S(PI_INT_PEND_MOD, (level)); \ + LOCAL_HUB_L(PI_INT_PEND0); \ +} while (0); + +#define REMOTE_HUB_CLR_INTR(hub, level) \ +do { \ + nasid_t __hub = (hub); \ + \ + REMOTE_HUB_S(__hub, PI_INT_PEND_MOD, (level)); \ + REMOTE_HUB_L(__hub, PI_INT_PEND0); \ +} while (0); + +/* + * Hard-coded interrupt levels: + */ + +/* + * L0 = SW1 + * L1 = SW2 + * L2 = INT_PEND0 + * L3 = INT_PEND1 + * L4 = RTC + * L5 = Profiling Timer + * L6 = Hub Errors + * L7 = Count/Compare (T5 counters) + */ + + +/* + * INT_PEND0 hard-coded bits. + */ + +/* + * INT_PEND0 bits determined by hardware: + */ +#define RESERVED_INTR 0 /* What is this bit? */ +#define GFX_INTR_A 1 +#define GFX_INTR_B 2 +#define PG_MIG_INTR 3 +#define UART_INTR 4 +#define CC_PEND_A 5 +#define CC_PEND_B 6 + +/* + * INT_PEND0 used by the kernel for itself ... + */ +#define CPU_RESCHED_A_IRQ 7 +#define CPU_RESCHED_B_IRQ 8 +#define CPU_CALL_A_IRQ 9 +#define CPU_CALL_B_IRQ 10 +#define MSC_MESG_INTR 11 +#define BASE_PCI_IRQ 12 + +/* + * INT_PEND0 again, bits determined by hardware / hardcoded: + */ +#define SDISK_INTR 63 /* SABLE name */ +#define IP_PEND0_6_63 63 /* What is this bit? */ + +/* + * INT_PEND1 hard-coded bits: + */ +#define NI_BRDCAST_ERR_A 39 +#define NI_BRDCAST_ERR_B 40 + +#define LLP_PFAIL_INTR_A 41 /* see ml/SN/SN0/sysctlr.c */ +#define LLP_PFAIL_INTR_B 42 + +#define TLB_INTR_A 43 /* used for tlb flush random */ +#define TLB_INTR_B 44 + +#define IP27_INTR_0 45 /* Reserved for PROM use */ +#define IP27_INTR_1 46 /* do not use in Kernel */ +#define IP27_INTR_2 47 +#define IP27_INTR_3 48 +#define IP27_INTR_4 49 +#define IP27_INTR_5 50 +#define IP27_INTR_6 51 +#define IP27_INTR_7 52 + +#define BRIDGE_ERROR_INTR 53 /* Setup by PROM to catch */ + /* Bridge Errors */ +#define DEBUG_INTR_A 54 +#define DEBUG_INTR_B 55 /* Used by symmon to stop all cpus */ +#define IO_ERROR_INTR 57 /* Setup by PROM */ +#define CLK_ERR_INTR 58 +#define COR_ERR_INTR_A 59 +#define COR_ERR_INTR_B 60 +#define MD_COR_ERR_INTR 61 +#define NI_ERROR_INTR 62 +#define MSC_PANIC_INTR 63 + +#endif /* __ASM_SN_INTR_H */ diff --git a/arch/mips/include/asm/sn/io.h b/arch/mips/include/asm/sn/io.h new file mode 100644 index 000000000000..24c6775fbb0f --- /dev/null +++ b/arch/mips/include/asm/sn/io.h @@ -0,0 +1,59 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000, 2003 Ralf Baechle + * Copyright (C) 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_SN_IO_H +#define _ASM_SN_IO_H + +#if defined(CONFIG_SGI_IP27) +#include <asm/sn/sn0/hubio.h> +#endif + + +#define IIO_ITTE_BASE 0x400160 /* base of translation table entries */ +#define IIO_ITTE(bigwin) (IIO_ITTE_BASE + 8*(bigwin)) + +#define IIO_ITTE_OFFSET_BITS 5 /* size of offset field */ +#define IIO_ITTE_OFFSET_MASK ((1<<IIO_ITTE_OFFSET_BITS)-1) +#define IIO_ITTE_OFFSET_SHIFT 0 + +#define IIO_ITTE_WIDGET_BITS 4 /* size of widget field */ +#define IIO_ITTE_WIDGET_MASK ((1<<IIO_ITTE_WIDGET_BITS)-1) +#define IIO_ITTE_WIDGET_SHIFT 8 + +#define IIO_ITTE_IOSP 1 /* I/O Space bit */ +#define IIO_ITTE_IOSP_MASK 1 +#define IIO_ITTE_IOSP_SHIFT 12 +#define HUB_PIO_MAP_TO_MEM 0 +#define HUB_PIO_MAP_TO_IO 1 + +#define IIO_ITTE_INVALID_WIDGET 3 /* an invalid widget */ + +#define IIO_ITTE_PUT(nasid, bigwin, io_or_mem, widget, addr) \ + REMOTE_HUB_S((nasid), IIO_ITTE(bigwin), \ + (((((addr) >> BWIN_SIZE_BITS) & \ + IIO_ITTE_OFFSET_MASK) << IIO_ITTE_OFFSET_SHIFT) | \ + (io_or_mem << IIO_ITTE_IOSP_SHIFT) | \ + (((widget) & IIO_ITTE_WIDGET_MASK) << IIO_ITTE_WIDGET_SHIFT))) + +#define IIO_ITTE_DISABLE(nasid, bigwin) \ + IIO_ITTE_PUT((nasid), HUB_PIO_MAP_TO_MEM, \ + (bigwin), IIO_ITTE_INVALID_WIDGET, 0) + +#define IIO_ITTE_GET(nasid, bigwin) REMOTE_HUB_ADDR((nasid), IIO_ITTE(bigwin)) + +/* + * Macro which takes the widget number, and returns the + * IO PRB address of that widget. + * value _x is expected to be a widget number in the range + * 0, 8 - 0xF + */ +#define IIO_IOPRB(_x) (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \ + (_x) : \ + (_x) - (HUB_WIDGET_ID_MIN-1)) << 3) ) + +#endif /* _ASM_SN_IO_H */ diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h new file mode 100644 index 000000000000..099677774d71 --- /dev/null +++ b/arch/mips/include/asm/sn/ioc3.h @@ -0,0 +1,663 @@ +/* + * Copyright (C) 1999, 2000 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _IOC3_H +#define _IOC3_H + +#include <linux/types.h> + +/* SUPERIO uart register map */ +typedef volatile struct ioc3_uartregs { + union { + volatile u8 rbr; /* read only, DLAB == 0 */ + volatile u8 thr; /* write only, DLAB == 0 */ + volatile u8 dll; /* DLAB == 1 */ + } u1; + union { + volatile u8 ier; /* DLAB == 0 */ + volatile u8 dlm; /* DLAB == 1 */ + } u2; + union { + volatile u8 iir; /* read only */ + volatile u8 fcr; /* write only */ + } u3; + volatile u8 iu_lcr; + volatile u8 iu_mcr; + volatile u8 iu_lsr; + volatile u8 iu_msr; + volatile u8 iu_scr; +} ioc3_uregs_t; + +#define iu_rbr u1.rbr +#define iu_thr u1.thr +#define iu_dll u1.dll +#define iu_ier u2.ier +#define iu_dlm u2.dlm +#define iu_iir u3.iir +#define iu_fcr u3.fcr + +struct ioc3_sioregs { + volatile u8 fill[0x141]; /* starts at 0x141 */ + + volatile u8 uartc; + volatile u8 kbdcg; + + volatile u8 fill0[0x150 - 0x142 - 1]; + + volatile u8 pp_data; + volatile u8 pp_dsr; + volatile u8 pp_dcr; + + volatile u8 fill1[0x158 - 0x152 - 1]; + + volatile u8 pp_fifa; + volatile u8 pp_cfgb; + volatile u8 pp_ecr; + + volatile u8 fill2[0x168 - 0x15a - 1]; + + volatile u8 rtcad; + volatile u8 rtcdat; + + volatile u8 fill3[0x170 - 0x169 - 1]; + + struct ioc3_uartregs uartb; /* 0x20170 */ + struct ioc3_uartregs uarta; /* 0x20178 */ +}; + +/* Register layout of IOC3 in configuration space. */ +struct ioc3 { + volatile u32 pad0[7]; /* 0x00000 */ + volatile u32 sio_ir; /* 0x0001c */ + volatile u32 sio_ies; /* 0x00020 */ + volatile u32 sio_iec; /* 0x00024 */ + volatile u32 sio_cr; /* 0x00028 */ + volatile u32 int_out; /* 0x0002c */ + volatile u32 mcr; /* 0x00030 */ + + /* General Purpose I/O registers */ + volatile u32 gpcr_s; /* 0x00034 */ + volatile u32 gpcr_c; /* 0x00038 */ + volatile u32 gpdr; /* 0x0003c */ + volatile u32 gppr_0; /* 0x00040 */ + volatile u32 gppr_1; /* 0x00044 */ + volatile u32 gppr_2; /* 0x00048 */ + volatile u32 gppr_3; /* 0x0004c */ + volatile u32 gppr_4; /* 0x00050 */ + volatile u32 gppr_5; /* 0x00054 */ + volatile u32 gppr_6; /* 0x00058 */ + volatile u32 gppr_7; /* 0x0005c */ + volatile u32 gppr_8; /* 0x00060 */ + volatile u32 gppr_9; /* 0x00064 */ + volatile u32 gppr_10; /* 0x00068 */ + volatile u32 gppr_11; /* 0x0006c */ + volatile u32 gppr_12; /* 0x00070 */ + volatile u32 gppr_13; /* 0x00074 */ + volatile u32 gppr_14; /* 0x00078 */ + volatile u32 gppr_15; /* 0x0007c */ + + /* Parallel Port Registers */ + volatile u32 ppbr_h_a; /* 0x00080 */ + volatile u32 ppbr_l_a; /* 0x00084 */ + volatile u32 ppcr_a; /* 0x00088 */ + volatile u32 ppcr; /* 0x0008c */ + volatile u32 ppbr_h_b; /* 0x00090 */ + volatile u32 ppbr_l_b; /* 0x00094 */ + volatile u32 ppcr_b; /* 0x00098 */ + + /* Keyboard and Mouse Registers */ + volatile u32 km_csr; /* 0x0009c */ + volatile u32 k_rd; /* 0x000a0 */ + volatile u32 m_rd; /* 0x000a4 */ + volatile u32 k_wd; /* 0x000a8 */ + volatile u32 m_wd; /* 0x000ac */ + + /* Serial Port Registers */ + volatile u32 sbbr_h; /* 0x000b0 */ + volatile u32 sbbr_l; /* 0x000b4 */ + volatile u32 sscr_a; /* 0x000b8 */ + volatile u32 stpir_a; /* 0x000bc */ + volatile u32 stcir_a; /* 0x000c0 */ + volatile u32 srpir_a; /* 0x000c4 */ + volatile u32 srcir_a; /* 0x000c8 */ + volatile u32 srtr_a; /* 0x000cc */ + volatile u32 shadow_a; /* 0x000d0 */ + volatile u32 sscr_b; /* 0x000d4 */ + volatile u32 stpir_b; /* 0x000d8 */ + volatile u32 stcir_b; /* 0x000dc */ + volatile u32 srpir_b; /* 0x000e0 */ + volatile u32 srcir_b; /* 0x000e4 */ + volatile u32 srtr_b; /* 0x000e8 */ + volatile u32 shadow_b; /* 0x000ec */ + + /* Ethernet Registers */ + volatile u32 emcr; /* 0x000f0 */ + volatile u32 eisr; /* 0x000f4 */ + volatile u32 eier; /* 0x000f8 */ + volatile u32 ercsr; /* 0x000fc */ + volatile u32 erbr_h; /* 0x00100 */ + volatile u32 erbr_l; /* 0x00104 */ + volatile u32 erbar; /* 0x00108 */ + volatile u32 ercir; /* 0x0010c */ + volatile u32 erpir; /* 0x00110 */ + volatile u32 ertr; /* 0x00114 */ + volatile u32 etcsr; /* 0x00118 */ + volatile u32 ersr; /* 0x0011c */ + volatile u32 etcdc; /* 0x00120 */ + volatile u32 ebir; /* 0x00124 */ + volatile u32 etbr_h; /* 0x00128 */ + volatile u32 etbr_l; /* 0x0012c */ + volatile u32 etcir; /* 0x00130 */ + volatile u32 etpir; /* 0x00134 */ + volatile u32 emar_h; /* 0x00138 */ + volatile u32 emar_l; /* 0x0013c */ + volatile u32 ehar_h; /* 0x00140 */ + volatile u32 ehar_l; /* 0x00144 */ + volatile u32 micr; /* 0x00148 */ + volatile u32 midr_r; /* 0x0014c */ + volatile u32 midr_w; /* 0x00150 */ + volatile u32 pad1[(0x20000 - 0x00154) / 4]; + + /* SuperIO Registers XXX */ + struct ioc3_sioregs sregs; /* 0x20000 */ + volatile u32 pad2[(0x40000 - 0x20180) / 4]; + + /* SSRAM Diagnostic Access */ + volatile u32 ssram[(0x80000 - 0x40000) / 4]; + + /* Bytebus device offsets + 0x80000 - Access to the generic devices selected with DEV0 + 0x9FFFF bytebus DEV_SEL_0 + 0xA0000 - Access to the generic devices selected with DEV1 + 0xBFFFF bytebus DEV_SEL_1 + 0xC0000 - Access to the generic devices selected with DEV2 + 0xDFFFF bytebus DEV_SEL_2 + 0xE0000 - Access to the generic devices selected with DEV3 + 0xFFFFF bytebus DEV_SEL_3 */ +}; + +/* + * Ethernet RX Buffer + */ +struct ioc3_erxbuf { + u32 w0; /* first word (valid,bcnt,cksum) */ + u32 err; /* second word various errors */ + /* next comes n bytes of padding */ + /* then the received ethernet frame itself */ +}; + +#define ERXBUF_IPCKSUM_MASK 0x0000ffff +#define ERXBUF_BYTECNT_MASK 0x07ff0000 +#define ERXBUF_BYTECNT_SHIFT 16 +#define ERXBUF_V 0x80000000 + +#define ERXBUF_CRCERR 0x00000001 /* aka RSV15 */ +#define ERXBUF_FRAMERR 0x00000002 /* aka RSV14 */ +#define ERXBUF_CODERR 0x00000004 /* aka RSV13 */ +#define ERXBUF_INVPREAMB 0x00000008 /* aka RSV18 */ +#define ERXBUF_LOLEN 0x00007000 /* aka RSV2_0 */ +#define ERXBUF_HILEN 0x03ff0000 /* aka RSV12_3 */ +#define ERXBUF_MULTICAST 0x04000000 /* aka RSV16 */ +#define ERXBUF_BROADCAST 0x08000000 /* aka RSV17 */ +#define ERXBUF_LONGEVENT 0x10000000 /* aka RSV19 */ +#define ERXBUF_BADPKT 0x20000000 /* aka RSV20 */ +#define ERXBUF_GOODPKT 0x40000000 /* aka RSV21 */ +#define ERXBUF_CARRIER 0x80000000 /* aka RSV22 */ + +/* + * Ethernet TX Descriptor + */ +#define ETXD_DATALEN 104 +struct ioc3_etxd { + u32 cmd; /* command field */ + u32 bufcnt; /* buffer counts field */ + u64 p1; /* buffer pointer 1 */ + u64 p2; /* buffer pointer 2 */ + u8 data[ETXD_DATALEN]; /* opt. tx data */ +}; + +#define ETXD_BYTECNT_MASK 0x000007ff /* total byte count */ +#define ETXD_INTWHENDONE 0x00001000 /* intr when done */ +#define ETXD_D0V 0x00010000 /* data 0 valid */ +#define ETXD_B1V 0x00020000 /* buf 1 valid */ +#define ETXD_B2V 0x00040000 /* buf 2 valid */ +#define ETXD_DOCHECKSUM 0x00080000 /* insert ip cksum */ +#define ETXD_CHKOFF_MASK 0x07f00000 /* cksum byte offset */ +#define ETXD_CHKOFF_SHIFT 20 + +#define ETXD_D0CNT_MASK 0x0000007f +#define ETXD_B1CNT_MASK 0x0007ff00 +#define ETXD_B1CNT_SHIFT 8 +#define ETXD_B2CNT_MASK 0x7ff00000 +#define ETXD_B2CNT_SHIFT 20 + +/* + * Bytebus device space + */ +#define IOC3_BYTEBUS_DEV0 0x80000L +#define IOC3_BYTEBUS_DEV1 0xa0000L +#define IOC3_BYTEBUS_DEV2 0xc0000L +#define IOC3_BYTEBUS_DEV3 0xe0000L + +/* ------------------------------------------------------------------------- */ + +/* Superio Registers (PIO Access) */ +#define IOC3_SIO_BASE 0x20000 +#define IOC3_SIO_UARTC (IOC3_SIO_BASE+0x141) /* UART Config */ +#define IOC3_SIO_KBDCG (IOC3_SIO_BASE+0x142) /* KBD Config */ +#define IOC3_SIO_PP_BASE (IOC3_SIO_BASE+PP_BASE) /* Parallel Port */ +#define IOC3_SIO_RTC_BASE (IOC3_SIO_BASE+0x168) /* Real Time Clock */ +#define IOC3_SIO_UB_BASE (IOC3_SIO_BASE+UARTB_BASE) /* UART B */ +#define IOC3_SIO_UA_BASE (IOC3_SIO_BASE+UARTA_BASE) /* UART A */ + +/* SSRAM Diagnostic Access */ +#define IOC3_SSRAM IOC3_RAM_OFF /* base of SSRAM diagnostic access */ +#define IOC3_SSRAM_LEN 0x40000 /* 256kb (address space size, may not be fully populated) */ +#define IOC3_SSRAM_DM 0x0000ffff /* data mask */ +#define IOC3_SSRAM_PM 0x00010000 /* parity mask */ + +/* bitmasks for PCI_SCR */ +#define PCI_SCR_PAR_RESP_EN 0x00000040 /* enb PCI parity checking */ +#define PCI_SCR_SERR_EN 0x00000100 /* enable the SERR# driver */ +#define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */ +#define PCI_SCR_RX_SERR (0x1 << 16) +#define PCI_SCR_DROP_MODE (0x1 << 17) +#define PCI_SCR_SIG_PAR_ERR (0x1 << 24) +#define PCI_SCR_SIG_TAR_ABRT (0x1 << 27) +#define PCI_SCR_RX_TAR_ABRT (0x1 << 28) +#define PCI_SCR_SIG_MST_ABRT (0x1 << 29) +#define PCI_SCR_SIG_SERR (0x1 << 30) +#define PCI_SCR_PAR_ERR (0x1 << 31) + +/* bitmasks for IOC3_KM_CSR */ +#define KM_CSR_K_WRT_PEND 0x00000001 /* kbd port xmitting or resetting */ +#define KM_CSR_M_WRT_PEND 0x00000002 /* mouse port xmitting or resetting */ +#define KM_CSR_K_LCB 0x00000004 /* Line Cntrl Bit for last KBD write */ +#define KM_CSR_M_LCB 0x00000008 /* same for mouse */ +#define KM_CSR_K_DATA 0x00000010 /* state of kbd data line */ +#define KM_CSR_K_CLK 0x00000020 /* state of kbd clock line */ +#define KM_CSR_K_PULL_DATA 0x00000040 /* pull kbd data line low */ +#define KM_CSR_K_PULL_CLK 0x00000080 /* pull kbd clock line low */ +#define KM_CSR_M_DATA 0x00000100 /* state of ms data line */ +#define KM_CSR_M_CLK 0x00000200 /* state of ms clock line */ +#define KM_CSR_M_PULL_DATA 0x00000400 /* pull ms data line low */ +#define KM_CSR_M_PULL_CLK 0x00000800 /* pull ms clock line low */ +#define KM_CSR_EMM_MODE 0x00001000 /* emulation mode */ +#define KM_CSR_SIM_MODE 0x00002000 /* clock X8 */ +#define KM_CSR_K_SM_IDLE 0x00004000 /* Keyboard is idle */ +#define KM_CSR_M_SM_IDLE 0x00008000 /* Mouse is idle */ +#define KM_CSR_K_TO 0x00010000 /* Keyboard trying to send/receive */ +#define KM_CSR_M_TO 0x00020000 /* Mouse trying to send/receive */ +#define KM_CSR_K_TO_EN 0x00040000 /* KM_CSR_K_TO + KM_CSR_K_TO_EN = cause + SIO_IR to assert */ +#define KM_CSR_M_TO_EN 0x00080000 /* KM_CSR_M_TO + KM_CSR_M_TO_EN = cause + SIO_IR to assert */ +#define KM_CSR_K_CLAMP_ONE 0x00100000 /* Pull K_CLK low after rec. one char */ +#define KM_CSR_M_CLAMP_ONE 0x00200000 /* Pull M_CLK low after rec. one char */ +#define KM_CSR_K_CLAMP_THREE 0x00400000 /* Pull K_CLK low after rec. three chars */ +#define KM_CSR_M_CLAMP_THREE 0x00800000 /* Pull M_CLK low after rec. three char */ + +/* bitmasks for IOC3_K_RD and IOC3_M_RD */ +#define KM_RD_DATA_2 0x000000ff /* 3rd char recvd since last read */ +#define KM_RD_DATA_2_SHIFT 0 +#define KM_RD_DATA_1 0x0000ff00 /* 2nd char recvd since last read */ +#define KM_RD_DATA_1_SHIFT 8 +#define KM_RD_DATA_0 0x00ff0000 /* 1st char recvd since last read */ +#define KM_RD_DATA_0_SHIFT 16 +#define KM_RD_FRAME_ERR_2 0x01000000 /* framing or parity error in byte 2 */ +#define KM_RD_FRAME_ERR_1 0x02000000 /* same for byte 1 */ +#define KM_RD_FRAME_ERR_0 0x04000000 /* same for byte 0 */ + +#define KM_RD_KBD_MSE 0x08000000 /* 0 if from kbd, 1 if from mouse */ +#define KM_RD_OFLO 0x10000000 /* 4th char recvd before this read */ +#define KM_RD_VALID_2 0x20000000 /* DATA_2 valid */ +#define KM_RD_VALID_1 0x40000000 /* DATA_1 valid */ +#define KM_RD_VALID_0 0x80000000 /* DATA_0 valid */ +#define KM_RD_VALID_ALL (KM_RD_VALID_0|KM_RD_VALID_1|KM_RD_VALID_2) + +/* bitmasks for IOC3_K_WD & IOC3_M_WD */ +#define KM_WD_WRT_DATA 0x000000ff /* write to keyboard/mouse port */ +#define KM_WD_WRT_DATA_SHIFT 0 + +/* bitmasks for serial RX status byte */ +#define RXSB_OVERRUN 0x01 /* char(s) lost */ +#define RXSB_PAR_ERR 0x02 /* parity error */ +#define RXSB_FRAME_ERR 0x04 /* framing error */ +#define RXSB_BREAK 0x08 /* break character */ +#define RXSB_CTS 0x10 /* state of CTS */ +#define RXSB_DCD 0x20 /* state of DCD */ +#define RXSB_MODEM_VALID 0x40 /* DCD, CTS and OVERRUN are valid */ +#define RXSB_DATA_VALID 0x80 /* data byte, FRAME_ERR PAR_ERR & BREAK valid */ + +/* bitmasks for serial TX control byte */ +#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */ +#define TXCB_INVALID 0x00 /* byte is invalid */ +#define TXCB_VALID 0x40 /* byte is valid */ +#define TXCB_MCR 0x80 /* data<7:0> to modem control register */ +#define TXCB_DELAY 0xc0 /* delay data<7:0> mSec */ + +/* bitmasks for IOC3_SBBR_L */ +#define SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */ +#define SBBR_L_BASE 0xfffff000 /* lower serial ring base addr */ + +/* bitmasks for IOC3_SSCR_<A:B> */ +#define SSCR_RX_THRESHOLD 0x000001ff /* hiwater mark */ +#define SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ +#define SSCR_HFC_EN 0x00020000 /* hardware flow control enabled */ +#define SSCR_RX_RING_DCD 0x00040000 /* post RX record on delta-DCD */ +#define SSCR_RX_RING_CTS 0x00080000 /* post RX record on delta-CTS */ +#define SSCR_HIGH_SPD 0x00100000 /* 4X speed */ +#define SSCR_DIAG 0x00200000 /* bypass clock divider for sim */ +#define SSCR_RX_DRAIN 0x08000000 /* drain RX buffer to memory */ +#define SSCR_DMA_EN 0x10000000 /* enable ring buffer DMA */ +#define SSCR_DMA_PAUSE 0x20000000 /* pause DMA */ +#define SSCR_PAUSE_STATE 0x40000000 /* sets when PAUSE takes effect */ +#define SSCR_RESET 0x80000000 /* reset DMA channels */ + +/* all producer/comsumer pointers are the same bitfield */ +#define PROD_CONS_PTR_4K 0x00000ff8 /* for 4K buffers */ +#define PROD_CONS_PTR_1K 0x000003f8 /* for 1K buffers */ +#define PROD_CONS_PTR_OFF 3 + +/* bitmasks for IOC3_SRCIR_<A:B> */ +#define SRCIR_ARM 0x80000000 /* arm RX timer */ + +/* bitmasks for IOC3_SRPIR_<A:B> */ +#define SRPIR_BYTE_CNT 0x07000000 /* bytes in packer */ +#define SRPIR_BYTE_CNT_SHIFT 24 + +/* bitmasks for IOC3_STCIR_<A:B> */ +#define STCIR_BYTE_CNT 0x0f000000 /* bytes in unpacker */ +#define STCIR_BYTE_CNT_SHIFT 24 + +/* bitmasks for IOC3_SHADOW_<A:B> */ +#define SHADOW_DR 0x00000001 /* data ready */ +#define SHADOW_OE 0x00000002 /* overrun error */ +#define SHADOW_PE 0x00000004 /* parity error */ +#define SHADOW_FE 0x00000008 /* framing error */ +#define SHADOW_BI 0x00000010 /* break interrupt */ +#define SHADOW_THRE 0x00000020 /* transmit holding register empty */ +#define SHADOW_TEMT 0x00000040 /* transmit shift register empty */ +#define SHADOW_RFCE 0x00000080 /* char in RX fifo has an error */ +#define SHADOW_DCTS 0x00010000 /* delta clear to send */ +#define SHADOW_DDCD 0x00080000 /* delta data carrier detect */ +#define SHADOW_CTS 0x00100000 /* clear to send */ +#define SHADOW_DCD 0x00800000 /* data carrier detect */ +#define SHADOW_DTR 0x01000000 /* data terminal ready */ +#define SHADOW_RTS 0x02000000 /* request to send */ +#define SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ +#define SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ +#define SHADOW_LOOP 0x10000000 /* loopback enabled */ + +/* bitmasks for IOC3_SRTR_<A:B> */ +#define SRTR_CNT 0x00000fff /* reload value for RX timer */ +#define SRTR_CNT_VAL 0x0fff0000 /* current value of RX timer */ +#define SRTR_CNT_VAL_SHIFT 16 +#define SRTR_HZ 16000 /* SRTR clock frequency */ + +/* bitmasks for IOC3_SIO_IR, IOC3_SIO_IEC and IOC3_SIO_IES */ +#define SIO_IR_SA_TX_MT 0x00000001 /* Serial port A TX empty */ +#define SIO_IR_SA_RX_FULL 0x00000002 /* port A RX buf full */ +#define SIO_IR_SA_RX_HIGH 0x00000004 /* port A RX hiwat */ +#define SIO_IR_SA_RX_TIMER 0x00000008 /* port A RX timeout */ +#define SIO_IR_SA_DELTA_DCD 0x00000010 /* port A delta DCD */ +#define SIO_IR_SA_DELTA_CTS 0x00000020 /* port A delta CTS */ +#define SIO_IR_SA_INT 0x00000040 /* port A pass-thru intr */ +#define SIO_IR_SA_TX_EXPLICIT 0x00000080 /* port A explicit TX thru */ +#define SIO_IR_SA_MEMERR 0x00000100 /* port A PCI error */ +#define SIO_IR_SB_TX_MT 0x00000200 /* */ +#define SIO_IR_SB_RX_FULL 0x00000400 /* */ +#define SIO_IR_SB_RX_HIGH 0x00000800 /* */ +#define SIO_IR_SB_RX_TIMER 0x00001000 /* */ +#define SIO_IR_SB_DELTA_DCD 0x00002000 /* */ +#define SIO_IR_SB_DELTA_CTS 0x00004000 /* */ +#define SIO_IR_SB_INT 0x00008000 /* */ +#define SIO_IR_SB_TX_EXPLICIT 0x00010000 /* */ +#define SIO_IR_SB_MEMERR 0x00020000 /* */ +#define SIO_IR_PP_INT 0x00040000 /* P port pass-thru intr */ +#define SIO_IR_PP_INTA 0x00080000 /* PP context A thru */ +#define SIO_IR_PP_INTB 0x00100000 /* PP context B thru */ +#define SIO_IR_PP_MEMERR 0x00200000 /* PP PCI error */ +#define SIO_IR_KBD_INT 0x00400000 /* kbd/mouse intr */ +#define SIO_IR_RT_INT 0x08000000 /* RT output pulse */ +#define SIO_IR_GEN_INT1 0x10000000 /* RT input pulse */ +#define SIO_IR_GEN_INT_SHIFT 28 + +/* per device interrupt masks */ +#define SIO_IR_SA (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL | \ + SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER | \ + SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS | \ + SIO_IR_SA_INT | SIO_IR_SA_TX_EXPLICIT | \ + SIO_IR_SA_MEMERR) +#define SIO_IR_SB (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL | \ + SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER | \ + SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS | \ + SIO_IR_SB_INT | SIO_IR_SB_TX_EXPLICIT | \ + SIO_IR_SB_MEMERR) +#define SIO_IR_PP (SIO_IR_PP_INT | SIO_IR_PP_INTA | \ + SIO_IR_PP_INTB | SIO_IR_PP_MEMERR) +#define SIO_IR_RT (SIO_IR_RT_INT | SIO_IR_GEN_INT1) + +/* macro to load pending interrupts */ +#define IOC3_PENDING_INTRS(mem) (PCI_INW(&((mem)->sio_ir)) & \ + PCI_INW(&((mem)->sio_ies_ro))) + +/* bitmasks for SIO_CR */ +#define SIO_CR_SIO_RESET 0x00000001 /* reset the SIO */ +#define SIO_CR_SER_A_BASE 0x000000fe /* DMA poll addr port A */ +#define SIO_CR_SER_A_BASE_SHIFT 1 +#define SIO_CR_SER_B_BASE 0x00007f00 /* DMA poll addr port B */ +#define SIO_CR_SER_B_BASE_SHIFT 8 +#define SIO_SR_CMD_PULSE 0x00078000 /* byte bus strobe length */ +#define SIO_CR_CMD_PULSE_SHIFT 15 +#define SIO_CR_ARB_DIAG 0x00380000 /* cur !enet PCI requet (ro) */ +#define SIO_CR_ARB_DIAG_TXA 0x00000000 +#define SIO_CR_ARB_DIAG_RXA 0x00080000 +#define SIO_CR_ARB_DIAG_TXB 0x00100000 +#define SIO_CR_ARB_DIAG_RXB 0x00180000 +#define SIO_CR_ARB_DIAG_PP 0x00200000 +#define SIO_CR_ARB_DIAG_IDLE 0x00400000 /* 0 -> active request (ro) */ + +/* bitmasks for INT_OUT */ +#define INT_OUT_COUNT 0x0000ffff /* pulse interval timer */ +#define INT_OUT_MODE 0x00070000 /* mode mask */ +#define INT_OUT_MODE_0 0x00000000 /* set output to 0 */ +#define INT_OUT_MODE_1 0x00040000 /* set output to 1 */ +#define INT_OUT_MODE_1PULSE 0x00050000 /* send 1 pulse */ +#define INT_OUT_MODE_PULSES 0x00060000 /* send 1 pulse every interval */ +#define INT_OUT_MODE_SQW 0x00070000 /* toggle output every interval */ +#define INT_OUT_DIAG 0x40000000 /* diag mode */ +#define INT_OUT_INT_OUT 0x80000000 /* current state of INT_OUT */ + +/* time constants for INT_OUT */ +#define INT_OUT_NS_PER_TICK (30 * 260) /* 30 ns PCI clock, divisor=260 */ +#define INT_OUT_TICKS_PER_PULSE 3 /* outgoing pulse lasts 3 ticks */ +#define INT_OUT_US_TO_COUNT(x) /* convert uS to a count value */ \ + (((x) * 10 + INT_OUT_NS_PER_TICK / 200) * \ + 100 / INT_OUT_NS_PER_TICK - 1) +#define INT_OUT_COUNT_TO_US(x) /* convert count value to uS */ \ + (((x) + 1) * INT_OUT_NS_PER_TICK / 1000) +#define INT_OUT_MIN_TICKS 3 /* min period is width of pulse in "ticks" */ +#define INT_OUT_MAX_TICKS INT_OUT_COUNT /* largest possible count */ + +/* bitmasks for GPCR */ +#define GPCR_DIR 0x000000ff /* tristate pin input or output */ +#define GPCR_DIR_PIN(x) (1<<(x)) /* access one of the DIR bits */ +#define GPCR_EDGE 0x000f0000 /* extint edge or level sensitive */ +#define GPCR_EDGE_PIN(x) (1<<((x)+15)) /* access one of the EDGE bits */ + +/* values for GPCR */ +#define GPCR_INT_OUT_EN 0x00100000 /* enable INT_OUT to pin 0 */ +#define GPCR_MLAN_EN 0x00200000 /* enable MCR to pin 8 */ +#define GPCR_DIR_SERA_XCVR 0x00000080 /* Port A Transceiver select enable */ +#define GPCR_DIR_SERB_XCVR 0x00000040 /* Port B Transceiver select enable */ +#define GPCR_DIR_PHY_RST 0x00000020 /* ethernet PHY reset enable */ + +/* defs for some of the generic I/O pins */ +#define GPCR_PHY_RESET 0x20 /* pin is output to PHY reset */ +#define GPCR_UARTB_MODESEL 0x40 /* pin is output to port B mode sel */ +#define GPCR_UARTA_MODESEL 0x80 /* pin is output to port A mode sel */ + +#define GPPR_PHY_RESET_PIN 5 /* GIO pin controlling phy reset */ +#define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin controlling uart b mode select */ +#define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin controlling uart a mode select */ + +#define EMCR_DUPLEX 0x00000001 +#define EMCR_PROMISC 0x00000002 +#define EMCR_PADEN 0x00000004 +#define EMCR_RXOFF_MASK 0x000001f8 +#define EMCR_RXOFF_SHIFT 3 +#define EMCR_RAMPAR 0x00000200 +#define EMCR_BADPAR 0x00000800 +#define EMCR_BUFSIZ 0x00001000 +#define EMCR_TXDMAEN 0x00002000 +#define EMCR_TXEN 0x00004000 +#define EMCR_RXDMAEN 0x00008000 +#define EMCR_RXEN 0x00010000 +#define EMCR_LOOPBACK 0x00020000 +#define EMCR_ARB_DIAG 0x001c0000 +#define EMCR_ARB_DIAG_IDLE 0x00200000 +#define EMCR_RST 0x80000000 + +#define EISR_RXTIMERINT 0x00000001 +#define EISR_RXTHRESHINT 0x00000002 +#define EISR_RXOFLO 0x00000004 +#define EISR_RXBUFOFLO 0x00000008 +#define EISR_RXMEMERR 0x00000010 +#define EISR_RXPARERR 0x00000020 +#define EISR_TXEMPTY 0x00010000 +#define EISR_TXRTRY 0x00020000 +#define EISR_TXEXDEF 0x00040000 +#define EISR_TXLCOL 0x00080000 +#define EISR_TXGIANT 0x00100000 +#define EISR_TXBUFUFLO 0x00200000 +#define EISR_TXEXPLICIT 0x00400000 +#define EISR_TXCOLLWRAP 0x00800000 +#define EISR_TXDEFERWRAP 0x01000000 +#define EISR_TXMEMERR 0x02000000 +#define EISR_TXPARERR 0x04000000 + +#define ERCSR_THRESH_MASK 0x000001ff /* enet RX threshold */ +#define ERCSR_RX_TMR 0x40000000 /* simulation only */ +#define ERCSR_DIAG_OFLO 0x80000000 /* simulation only */ + +#define ERBR_ALIGNMENT 4096 +#define ERBR_L_RXRINGBASE_MASK 0xfffff000 + +#define ERBAR_BARRIER_BIT 0x0100 +#define ERBAR_RXBARR_MASK 0xffff0000 +#define ERBAR_RXBARR_SHIFT 16 + +#define ERCIR_RXCONSUME_MASK 0x00000fff + +#define ERPIR_RXPRODUCE_MASK 0x00000fff +#define ERPIR_ARM 0x80000000 + +#define ERTR_CNT_MASK 0x000007ff + +#define ETCSR_IPGT_MASK 0x0000007f +#define ETCSR_IPGR1_MASK 0x00007f00 +#define ETCSR_IPGR1_SHIFT 8 +#define ETCSR_IPGR2_MASK 0x007f0000 +#define ETCSR_IPGR2_SHIFT 16 +#define ETCSR_NOTXCLK 0x80000000 + +#define ETCDC_COLLCNT_MASK 0x0000ffff +#define ETCDC_DEFERCNT_MASK 0xffff0000 +#define ETCDC_DEFERCNT_SHIFT 16 + +#define ETBR_ALIGNMENT (64*1024) +#define ETBR_L_RINGSZ_MASK 0x00000001 +#define ETBR_L_RINGSZ128 0 +#define ETBR_L_RINGSZ512 1 +#define ETBR_L_TXRINGBASE_MASK 0xffffc000 + +#define ETCIR_TXCONSUME_MASK 0x0000ffff +#define ETCIR_IDLE 0x80000000 + +#define ETPIR_TXPRODUCE_MASK 0x0000ffff + +#define EBIR_TXBUFPROD_MASK 0x0000001f +#define EBIR_TXBUFCONS_MASK 0x00001f00 +#define EBIR_TXBUFCONS_SHIFT 8 +#define EBIR_RXBUFPROD_MASK 0x007fc000 +#define EBIR_RXBUFPROD_SHIFT 14 +#define EBIR_RXBUFCONS_MASK 0xff800000 +#define EBIR_RXBUFCONS_SHIFT 23 + +#define MICR_REGADDR_MASK 0x0000001f +#define MICR_PHYADDR_MASK 0x000003e0 +#define MICR_PHYADDR_SHIFT 5 +#define MICR_READTRIG 0x00000400 +#define MICR_BUSY 0x00000800 + +#define MIDR_DATA_MASK 0x0000ffff + +#define ERXBUF_IPCKSUM_MASK 0x0000ffff +#define ERXBUF_BYTECNT_MASK 0x07ff0000 +#define ERXBUF_BYTECNT_SHIFT 16 +#define ERXBUF_V 0x80000000 + +#define ERXBUF_CRCERR 0x00000001 /* aka RSV15 */ +#define ERXBUF_FRAMERR 0x00000002 /* aka RSV14 */ +#define ERXBUF_CODERR 0x00000004 /* aka RSV13 */ +#define ERXBUF_INVPREAMB 0x00000008 /* aka RSV18 */ +#define ERXBUF_LOLEN 0x00007000 /* aka RSV2_0 */ +#define ERXBUF_HILEN 0x03ff0000 /* aka RSV12_3 */ +#define ERXBUF_MULTICAST 0x04000000 /* aka RSV16 */ +#define ERXBUF_BROADCAST 0x08000000 /* aka RSV17 */ +#define ERXBUF_LONGEVENT 0x10000000 /* aka RSV19 */ +#define ERXBUF_BADPKT 0x20000000 /* aka RSV20 */ +#define ERXBUF_GOODPKT 0x40000000 /* aka RSV21 */ +#define ERXBUF_CARRIER 0x80000000 /* aka RSV22 */ + +#define ETXD_BYTECNT_MASK 0x000007ff /* total byte count */ +#define ETXD_INTWHENDONE 0x00001000 /* intr when done */ +#define ETXD_D0V 0x00010000 /* data 0 valid */ +#define ETXD_B1V 0x00020000 /* buf 1 valid */ +#define ETXD_B2V 0x00040000 /* buf 2 valid */ +#define ETXD_DOCHECKSUM 0x00080000 /* insert ip cksum */ +#define ETXD_CHKOFF_MASK 0x07f00000 /* cksum byte offset */ +#define ETXD_CHKOFF_SHIFT 20 + +#define ETXD_D0CNT_MASK 0x0000007f +#define ETXD_B1CNT_MASK 0x0007ff00 +#define ETXD_B1CNT_SHIFT 8 +#define ETXD_B2CNT_MASK 0x7ff00000 +#define ETXD_B2CNT_SHIFT 20 + +typedef enum ioc3_subdevs_e { + ioc3_subdev_ether, + ioc3_subdev_generic, + ioc3_subdev_nic, + ioc3_subdev_kbms, + ioc3_subdev_ttya, + ioc3_subdev_ttyb, + ioc3_subdev_ecpp, + ioc3_subdev_rt, + ioc3_nsubdevs +} ioc3_subdev_t; + +/* subdevice disable bits, + * from the standard INFO_LBL_SUBDEVS + */ +#define IOC3_SDB_ETHER (1<<ioc3_subdev_ether) +#define IOC3_SDB_GENERIC (1<<ioc3_subdev_generic) +#define IOC3_SDB_NIC (1<<ioc3_subdev_nic) +#define IOC3_SDB_KBMS (1<<ioc3_subdev_kbms) +#define IOC3_SDB_TTYA (1<<ioc3_subdev_ttya) +#define IOC3_SDB_TTYB (1<<ioc3_subdev_ttyb) +#define IOC3_SDB_ECPP (1<<ioc3_subdev_ecpp) +#define IOC3_SDB_RT (1<<ioc3_subdev_rt) + +#define IOC3_ALL_SUBDEVS ((1<<ioc3_nsubdevs)-1) + +#define IOC3_SDB_SERIAL (IOC3_SDB_TTYA|IOC3_SDB_TTYB) + +#define IOC3_STD_SUBDEVS IOC3_ALL_SUBDEVS + +#define IOC3_INTA_SUBDEVS IOC3_SDB_ETHER +#define IOC3_INTB_SUBDEVS (IOC3_SDB_GENERIC|IOC3_SDB_KBMS|IOC3_SDB_SERIAL|IOC3_SDB_ECPP|IOC3_SDB_RT) + +#endif /* _IOC3_H */ diff --git a/arch/mips/include/asm/sn/klconfig.h b/arch/mips/include/asm/sn/klconfig.h new file mode 100644 index 000000000000..09e590daca17 --- /dev/null +++ b/arch/mips/include/asm/sn/klconfig.h @@ -0,0 +1,898 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX <sys/SN/klconfig.h>. + * + * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 1999, 2000 by Ralf Baechle + */ +#ifndef _ASM_SN_KLCONFIG_H +#define _ASM_SN_KLCONFIG_H + +/* + * The KLCONFIG structures store info about the various BOARDs found + * during Hardware Discovery. In addition, it stores info about the + * components found on the BOARDs. + */ + +/* + * WARNING: + * Certain assembly language routines (notably xxxxx.s) in the IP27PROM + * will depend on the format of the data structures in this file. In + * most cases, rearranging the fields can seriously break things. + * Adding fields in the beginning or middle can also break things. + * Add fields if necessary, to the end of a struct in such a way + * that offsets of existing fields do not change. + */ + +#include <linux/types.h> +#include <asm/sn/types.h> + +#if defined(CONFIG_SGI_IP27) + +#include <asm/sn/sn0/addrs.h> +//#include <sys/SN/router.h> +// XXX Stolen from <sys/SN/router.h>: +#define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */ +#include <asm/sn/fru.h> +//#include <sys/graph.h> +//#include <sys/xtalk/xbow.h> + +#elif defined(CONFIG_SGI_IP35) + +#include <asm/sn/sn1/addrs.h> +#include <sys/sn/router.h> +#include <sys/graph.h> +#include <asm/xtalk/xbow.h> + +#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */ + +#if defined(CONFIG_SGI_IP27) || defined(CONFIG_SGI_IP35) +#include <asm/sn/agent.h> +#include <asm/fw/arc/types.h> +#include <asm/fw/arc/hinv.h> +#if defined(CONFIG_SGI_IP35) +// The hack file has to be before vector and after sn0_fru.... +#include <asm/hack.h> +#include <asm/sn/vector.h> +#include <asm/xtalk/xtalk.h> +#endif /* CONFIG_SGI_IP35 */ +#endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */ + +typedef u64 nic_t; + +#define KLCFGINFO_MAGIC 0xbeedbabe + +typedef s32 klconf_off_t; + +/* + * Some IMPORTANT OFFSETS. These are the offsets on all NODES. + */ +#define MAX_MODULE_ID 255 +#define SIZE_PAD 4096 /* 4k padding for structures */ +/* + * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets, + * 2 Midplanes assuming no pci card cages + */ +#define MAX_SLOTS_PER_NODE (1 + 2 + 6 + 2) + +/* XXX if each node is guranteed to have some memory */ + +#define MAX_PCI_DEVS 8 + +/* lboard_t->brd_flags fields */ +/* All bits in this field are currently used. Try the pad fields if + you need more flag bits */ + +#define ENABLE_BOARD 0x01 +#define FAILED_BOARD 0x02 +#define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which + are discovered twice. Use one of them */ +#define VISITED_BOARD 0x08 /* Used for compact hub numbering. */ +#define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */ +#define GLOBAL_MASTER_IO6 0x20 +#define THIRD_NIC_PRESENT 0x40 /* for future use */ +#define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */ + +/* klinfo->flags fields */ + +#define KLINFO_ENABLE 0x01 /* This component is enabled */ +#define KLINFO_FAILED 0x02 /* This component failed */ +#define KLINFO_DEVICE 0x04 /* This component is a device */ +#define KLINFO_VISITED 0x08 /* This component has been visited */ +#define KLINFO_CONTROLLER 0x10 /* This component is a device controller */ +#define KLINFO_INSTALL 0x20 /* Install a driver */ +#define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */ +#define IS_CONSOLE_IOC3(i) ((((klinfo_t *)i)->flags) & KLINFO_INSTALL) + +#define GB2 0x80000000 + +#define MAX_RSV_PTRS 32 + +/* Structures to manage various data storage areas */ +/* The numbers must be contiguous since the array index i + is used in the code to allocate various areas. +*/ + +#define BOARD_STRUCT 0 +#define COMPONENT_STRUCT 1 +#define ERRINFO_STRUCT 2 +#define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1) +#define DEVICE_STRUCT 3 + + +typedef struct console_s { + unsigned long uart_base; + unsigned long config_base; + unsigned long memory_base; + short baud; + short flag; + int type; + nasid_t nasid; + char wid; + char npci; + nic_t baseio_nic; +} console_t; + +typedef struct klc_malloc_hdr { + klconf_off_t km_base; + klconf_off_t km_limit; + klconf_off_t km_current; +} klc_malloc_hdr_t; + +/* Functions/macros needed to use this structure */ + +typedef struct kl_config_hdr { + u64 ch_magic; /* set this to KLCFGINFO_MAGIC */ + u32 ch_version; /* structure version number */ + klconf_off_t ch_malloc_hdr_off; /* offset of ch_malloc_hdr */ + klconf_off_t ch_cons_off; /* offset of ch_cons */ + klconf_off_t ch_board_info; /* the link list of boards */ + console_t ch_cons_info; /* address info of the console */ + klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX]; + confidence_t ch_sw_belief; /* confidence that software is bad*/ + confidence_t ch_sn0net_belief; /* confidence that sn0net is bad */ +} kl_config_hdr_t; + + +#define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid))) +#define KL_CONFIG_INFO_OFFSET(_nasid) \ + (KL_CONFIG_HDR(_nasid)->ch_board_info) +#define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \ + (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off)) + +#define KL_CONFIG_INFO(_nasid) \ + (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \ + NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \ + 0) +#define KL_CONFIG_MAGIC(_nasid) (KL_CONFIG_HDR(_nasid)->ch_magic) + +#define KL_CONFIG_CHECK_MAGIC(_nasid) \ + (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC) + +#define KL_CONFIG_HDR_INIT_MAGIC(_nasid) \ + (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC) + +/* --- New Macros for the changed kl_config_hdr_t structure --- */ + +#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ + ((unsigned long)_k + (_k->ch_malloc_hdr_off))) + +#define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n)) + +#define PTR_CH_CONS_INFO(_k) ((console_t *)\ + ((unsigned long)_k + (_k->ch_cons_off))) + +#define KL_CONFIG_CH_CONS_INFO(_n) PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n)) + +/* ------------------------------------------------------------- */ + +#define KL_CONFIG_INFO_START(_nasid) \ + (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t)) + +#define KL_CONFIG_BOARD_NASID(_brd) ((_brd)->brd_nasid) +#define KL_CONFIG_BOARD_SET_NEXT(_brd, _off) ((_brd)->brd_next = (_off)) + +#define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD) + +#define XBOW_PORT_TYPE_HUB(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB) +#define XBOW_PORT_TYPE_IO(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO) + +#define XBOW_PORT_IS_ENABLED(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE) +#define XBOW_PORT_NASID(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid) + +#define XBOW_PORT_IO 0x1 +#define XBOW_PORT_HUB 0x2 +#define XBOW_PORT_ENABLE 0x4 + +#define SN0_PORT_FENCE_SHFT 0 +#define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT) + +/* + * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD + * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to + * the LOCAL/current NODE. REMOTE means it is attached to a different + * node.(TBD - Need a way to treat ROUTER boards.) + * + * There are 2 different structures to represent these boards - + * lboard - Local board, rboard - remote board. These 2 structures + * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer + * Figure below). The first byte of the rboard or lboard structure + * is used to find out its type - no unions are used. + * If it is a lboard, then the config info of this board will be found + * on the local node. (LOCAL NODE BASE + offset value gives pointer to + * the structure. + * If it is a rboard, the local structure contains the node number + * and the offset of the beginning of the LINKED LIST on the remote node. + * The details of the hardware on a remote node can be built locally, + * if required, by reading the LINKED LIST on the remote node and + * ignoring all the rboards on that node. + * + * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the + * First board info on the remote node. The remote node list is + * traversed as the local list, using the REMOTE BASE ADDRESS and not + * the local base address and ignoring all rboard values. + * + * + KLCONFIG + + +------------+ +------------+ +------------+ +------------+ + | lboard | +-->| lboard | +-->| rboard | +-->| lboard | + +------------+ | +------------+ | +------------+ | +------------+ + | board info | | | board info | | |errinfo,bptr| | | board info | + +------------+ | +------------+ | +------------+ | +------------+ + | offset |--+ | offset |--+ | offset |--+ |offset=NULL | + +------------+ +------------+ +------------+ +------------+ + + + +------------+ + | board info | + +------------+ +--------------------------------+ + | compt 1 |------>| type, rev, diaginfo, size ... | (CPU) + +------------+ +--------------------------------+ + | compt 2 |--+ + +------------+ | +--------------------------------+ + | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) + +------------+ +--------------------------------+ + | errinfo |--+ + +------------+ | +--------------------------------+ + +--->|r/l brd errinfo,compt err flags | + +--------------------------------+ + + * + * Each BOARD consists of COMPONENTs and the BOARD structure has + * pointers (offsets) to its COMPONENT structure. + * The COMPONENT structure has version info, size and speed info, revision, + * error info and the NIC info. This structure can accommodate any + * BOARD with arbitrary COMPONENT composition. + * + * The ERRORINFO part of each BOARD has error information + * that describes errors about the BOARD itself. It also has flags to + * indicate the COMPONENT(s) on the board that have errors. The error + * information specific to the COMPONENT is present in the respective + * COMPONENT structure. + * + * The ERRORINFO structure is also treated like a COMPONENT, ie. the + * BOARD has pointers(offset) to the ERRORINFO structure. The rboard + * structure also has a pointer to the ERRORINFO structure. This is + * the place to store ERRORINFO about a REMOTE NODE, if the HUB on + * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where + * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can + * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info + * which is present on the REMOTE NODE.(TBD) + * REMOTE ERRINFO can be stored on any of the nearest nodes + * or on all the nearest nodes.(TBD) + * Like BOARD structures, REMOTE ERRINFO structures can be built locally + * using the rboard errinfo pointer. + * + * In order to get useful information from this Data organization, a set of + * interface routines are provided (TBD). The important thing to remember while + * manipulating the structures, is that, the NODE number information should + * be used. If the NODE is non-zero (remote) then each offset should + * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. + * This includes offsets for BOARDS, COMPONENTS and ERRORINFO. + * + * Note that these structures do not provide much info about connectivity. + * That info will be part of HWGRAPH, which is an extension of the cfg_t + * data structure. (ref IP27prom/cfg.h) It has to be extended to include + * the IO part of the Network(TBD). + * + * The data structures below define the above concepts. + */ + +/* + * Values for CPU types + */ +#define KL_CPU_R4000 0x1 /* Standard R4000 */ +#define KL_CPU_TFP 0x2 /* TFP processor */ +#define KL_CPU_R10000 0x3 /* R10000 (T5) */ +#define KL_CPU_NONE (-1) /* no cpu present in slot */ + +/* + * IP27 BOARD classes + */ + +#define KLCLASS_MASK 0xf0 +#define KLCLASS_NONE 0x00 +#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ +#define KLCLASS_CPU KLCLASS_NODE +#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI + and the non-graphics widget boards */ +#define KLCLASS_ROUTER 0x30 /* Router board */ +#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board + so that we can record error info */ +#define KLCLASS_GFX 0x50 /* graphics boards */ + +#define KLCLASS_PSEUDO_GFX 0x60 /* HDTV type cards that use a gfx + * hw ifc to xtalk and are not gfx + * class for sw purposes */ + +#define KLCLASS_MAX 7 /* Bump this if a new CLASS is added */ +#define KLTYPE_MAX 10 /* Bump this if a new CLASS is added */ + +#define KLCLASS_UNKNOWN 0xf0 + +#define KLCLASS(_x) ((_x) & KLCLASS_MASK) + +/* + * IP27 board types + */ + +#define KLTYPE_MASK 0x0f +#define KLTYPE_NONE 0x00 +#define KLTYPE_EMPTY 0x00 + +#define KLTYPE_WEIRDCPU (KLCLASS_CPU | 0x0) +#define KLTYPE_IP27 (KLCLASS_CPU | 0x1) /* 2 CPUs(R10K) per board */ + +#define KLTYPE_WEIRDIO (KLCLASS_IO | 0x0) +#define KLTYPE_BASEIO (KLCLASS_IO | 0x1) /* IOC3, SuperIO, Bridge, SCSI */ +#define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */ +#define KLTYPE_4CHSCSI (KLCLASS_IO | 0x2) +#define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */ +#define KLTYPE_ETHERNET (KLCLASS_IO | 0x3) +#define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */ +#define KLTYPE_FDDI (KLCLASS_IO | 0x4) +#define KLTYPE_UNUSED (KLCLASS_IO | 0x5) /* XXX UNUSED */ +#define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */ +#define KLTYPE_PCI KLTYPE_HAROLD +#define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */ +#define KLTYPE_MIO (KLCLASS_IO | 0x8) +#define KLTYPE_FC (KLCLASS_IO | 0x9) +#define KLTYPE_LINC (KLCLASS_IO | 0xA) +#define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */ +#define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */ +#define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */ + +#define KLTYPE_GFX (KLCLASS_GFX | 0x0) /* unknown graphics type */ +#define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */ +#define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */ + +#define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0) +#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) +#define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */ +#define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2) +#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3) + +#define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0) +#define KLTYPE_MIDPLANE8 (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */ +#define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8 +#define KLTYPE_PBRICK_XBOW (KLCLASS_MIDPLANE | 0x2) + +#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0) +#define KLTYPE_IBRICK (KLCLASS_IOBRICK | 0x1) +#define KLTYPE_PBRICK (KLCLASS_IOBRICK | 0x2) +#define KLTYPE_XBRICK (KLCLASS_IOBRICK | 0x3) + +#define KLTYPE_PBRICK_BRIDGE KLTYPE_PBRICK + +/* The value of type should be more than 8 so that hinv prints + * out the board name from the NIC string. For values less than + * 8 the name of the board needs to be hard coded in a few places. + * When bringup started nic names had not standardized and so we + * had to hard code. (For people interested in history.) + */ +#define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9) + +#define KLTYPE_UNKNOWN (KLCLASS_UNKNOWN | 0xf) + +#define KLTYPE(_x) ((_x) & KLTYPE_MASK) +#define IS_MIO_PRESENT(l) ((l->brd_type == KLTYPE_BASEIO) && \ + (l->brd_flags & SECOND_NIC_PRESENT)) +#define IS_MIO_IOC3(l, n) (IS_MIO_PRESENT(l) && (n > 2)) + +/* + * board structures + */ + +#define MAX_COMPTS_PER_BRD 24 + +#define LOCAL_BOARD 1 +#define REMOTE_BOARD 2 + +#define LBOARD_STRUCT_VERSION 2 + +typedef struct lboard_s { + klconf_off_t brd_next; /* Next BOARD */ + unsigned char struct_type; /* type of structure, local or remote */ + unsigned char brd_type; /* type+class */ + unsigned char brd_sversion; /* version of this structure */ + unsigned char brd_brevision; /* board revision */ + unsigned char brd_promver; /* board prom version, if any */ + unsigned char brd_flags; /* Enabled, Disabled etc */ + unsigned char brd_slot; /* slot number */ + unsigned short brd_debugsw; /* Debug switches */ + moduleid_t brd_module; /* module to which it belongs */ + partid_t brd_partition; /* Partition number */ + unsigned short brd_diagval; /* diagnostic value */ + unsigned short brd_diagparm; /* diagnostic parameter */ + unsigned char brd_inventory; /* inventory history */ + unsigned char brd_numcompts; /* Number of components */ + nic_t brd_nic; /* Number in CAN */ + nasid_t brd_nasid; /* passed parameter */ + klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ + klconf_off_t brd_errinfo; /* Board's error information */ + struct lboard_s *brd_parent; /* Logical parent for this brd */ + vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */ + confidence_t brd_confidence; /* confidence that the board is bad */ + nasid_t brd_owner; /* who owns this board */ + unsigned char brd_nic_flags; /* To handle 8 more NICs */ + char brd_name[32]; +} lboard_t; + + +/* + * Make sure we pass back the calias space address for local boards. + * klconfig board traversal and error structure extraction defines. + */ + +#define BOARD_SLOT(_brd) ((_brd)->brd_slot) + +#define KLCF_CLASS(_brd) KLCLASS((_brd)->brd_type) +#define KLCF_TYPE(_brd) KLTYPE((_brd)->brd_type) +#define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1) +#define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts) +#define KLCF_MODULE_ID(_brd) ((_brd)->brd_module) + +#define KLCF_NEXT(_brd) \ + ((_brd)->brd_next ? \ + (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\ + NULL) +#define KLCF_COMP(_brd, _ndx) \ + (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \ + (_brd)->brd_compts[(_ndx)])) + +#define KLCF_COMP_ERROR(_brd, _comp) \ + (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo)) + +#define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type) +#define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */ + + + +/* + * Generic info structure. This stores common info about a + * component. + */ + +typedef struct klinfo_s { /* Generic info */ + unsigned char struct_type; /* type of this structure */ + unsigned char struct_version; /* version of this structure */ + unsigned char flags; /* Enabled, disabled etc */ + unsigned char revision; /* component revision */ + unsigned short diagval; /* result of diagnostics */ + unsigned short diagparm; /* diagnostic parameter */ + unsigned char inventory; /* previous inventory status */ + nic_t nic; /* MUst be aligned properly */ + unsigned char physid; /* physical id of component */ + unsigned int virtid; /* virtual id as seen by system */ + unsigned char widid; /* Widget id - if applicable */ + nasid_t nasid; /* node number - from parent */ + char pad1; /* pad out structure. */ + char pad2; /* pad out structure. */ + COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/ + klconf_off_t errinfo; /* component specific errors */ + unsigned short pad3; /* pci fields have moved over to */ + unsigned short pad4; /* klbri_t */ +} klinfo_t ; + +#define KLCONFIG_INFO_ENABLED(_i) ((_i)->flags & KLINFO_ENABLE) +/* + * Component structures. + * Following are the currently identified components: + * CPU, HUB, MEM_BANK, + * XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE) + * BRIDGE, IOC3, SuperIO, SCSI, FDDI + * ROUTER + * GRAPHICS + */ +#define KLSTRUCT_UNKNOWN 0 +#define KLSTRUCT_CPU 1 +#define KLSTRUCT_HUB 2 +#define KLSTRUCT_MEMBNK 3 +#define KLSTRUCT_XBOW 4 +#define KLSTRUCT_BRI 5 +#define KLSTRUCT_IOC3 6 +#define KLSTRUCT_PCI 7 +#define KLSTRUCT_VME 8 +#define KLSTRUCT_ROU 9 +#define KLSTRUCT_GFX 10 +#define KLSTRUCT_SCSI 11 +#define KLSTRUCT_FDDI 12 +#define KLSTRUCT_MIO 13 +#define KLSTRUCT_DISK 14 +#define KLSTRUCT_TAPE 15 +#define KLSTRUCT_CDROM 16 +#define KLSTRUCT_HUB_UART 17 +#define KLSTRUCT_IOC3ENET 18 +#define KLSTRUCT_IOC3UART 19 +#define KLSTRUCT_UNUSED 20 /* XXX UNUSED */ +#define KLSTRUCT_IOC3PCKM 21 +#define KLSTRUCT_RAD 22 +#define KLSTRUCT_HUB_TTY 23 +#define KLSTRUCT_IOC3_TTY 24 + +/* Early Access IO proms are compatible + only with KLSTRUCT values upto 24. */ + +#define KLSTRUCT_FIBERCHANNEL 25 +#define KLSTRUCT_MOD_SERIAL_NUM 26 +#define KLSTRUCT_IOC3MS 27 +#define KLSTRUCT_TPU 28 +#define KLSTRUCT_GSN_A 29 +#define KLSTRUCT_GSN_B 30 +#define KLSTRUCT_XTHD 31 + +/* + * These are the indices of various components within a lboard structure. + */ + +#define IP27_CPU0_INDEX 0 +#define IP27_CPU1_INDEX 1 +#define IP27_HUB_INDEX 2 +#define IP27_MEM_INDEX 3 + +#define BASEIO_BRIDGE_INDEX 0 +#define BASEIO_IOC3_INDEX 1 +#define BASEIO_SCSI1_INDEX 2 +#define BASEIO_SCSI2_INDEX 3 + +#define MIDPLANE_XBOW_INDEX 0 +#define ROUTER_COMPONENT_INDEX 0 + +#define CH4SCSI_BRIDGE_INDEX 0 + +/* Info holders for various hardware components */ + +typedef u64 *pci_t; +typedef u64 *vmeb_t; +typedef u64 *vmed_t; +typedef u64 *fddi_t; +typedef u64 *scsi_t; +typedef u64 *mio_t; +typedef u64 *graphics_t; +typedef u64 *router_t; + +/* + * The port info in ip27_cfg area translates to a lboart_t in the + * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t + * is stored in terms of a nasid and a offset from start of KLCONFIG + * area on that nasid. + */ +typedef struct klport_s { + nasid_t port_nasid; + unsigned char port_flag; + klconf_off_t port_offset; +} klport_t; + +typedef struct klcpu_s { /* CPU */ + klinfo_t cpu_info; + unsigned short cpu_prid; /* Processor PRID value */ + unsigned short cpu_fpirr; /* FPU IRR value */ + unsigned short cpu_speed; /* Speed in MHZ */ + unsigned short cpu_scachesz; /* secondary cache size in MB */ + unsigned short cpu_scachespeed;/* secondary cache speed in MHz */ +} klcpu_t ; + +#define CPU_STRUCT_VERSION 2 + +typedef struct klhub_s { /* HUB */ + klinfo_t hub_info; + unsigned int hub_flags; /* PCFG_HUB_xxx flags */ + klport_t hub_port; /* hub is connected to this */ + nic_t hub_box_nic; /* nic of containing box */ + klconf_off_t hub_mfg_nic; /* MFG NIC string */ + u64 hub_speed; /* Speed of hub in HZ */ +} klhub_t ; + +typedef struct klhub_uart_s { /* HUB */ + klinfo_t hubuart_info; + unsigned int hubuart_flags; /* PCFG_HUB_xxx flags */ + nic_t hubuart_box_nic; /* nic of containing box */ +} klhub_uart_t ; + +#define MEMORY_STRUCT_VERSION 2 + +typedef struct klmembnk_s { /* MEMORY BANK */ + klinfo_t membnk_info; + short membnk_memsz; /* Total memory in megabytes */ + short membnk_dimm_select; /* bank to physical addr mapping*/ + short membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */ + short membnk_attr; +} klmembnk_t ; + +#define KLCONFIG_MEMBNK_SIZE(_info, _bank) \ + ((_info)->membnk_bnksz[(_bank)]) + + +#define MEMBNK_PREMIUM 1 +#define KLCONFIG_MEMBNK_PREMIUM(_info, _bank) \ + ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank))) + +#define MAX_SERIAL_NUM_SIZE 10 + +typedef struct klmod_serial_num_s { + klinfo_t snum_info; + union { + char snum_str[MAX_SERIAL_NUM_SIZE]; + unsigned long long snum_int; + } snum; +} klmod_serial_num_t; + +/* Macros needed to access serial number structure in lboard_t. + Hard coded values are necessary since we cannot treat + serial number struct as a component without losing compatibility + between prom versions. */ + +#define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\ + KLCF_COMP(_l, _l->brd_numcompts)) + +#define MAX_XBOW_LINKS 16 + +typedef struct klxbow_s { /* XBOW */ + klinfo_t xbow_info ; + klport_t xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */ + int xbow_master_hub_link; + /* type of brd connected+component struct ptr+flags */ +} klxbow_t ; + +#define MAX_PCI_SLOTS 8 + +typedef struct klpci_device_s { + s32 pci_device_id; /* 32 bits of vendor/device ID. */ + s32 pci_device_pad; /* 32 bits of padding. */ +} klpci_device_t; + +#define BRIDGE_STRUCT_VERSION 2 + +typedef struct klbri_s { /* BRIDGE */ + klinfo_t bri_info ; + unsigned char bri_eprominfo ; /* IO6prom connected to bridge */ + unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */ + pci_t pci_specific ; /* PCI Board config info */ + klpci_device_t bri_devices[MAX_PCI_DEVS] ; /* PCI IDs */ + klconf_off_t bri_mfg_nic ; +} klbri_t ; + +#define MAX_IOC3_TTY 2 + +typedef struct klioc3_s { /* IOC3 */ + klinfo_t ioc3_info ; + unsigned char ioc3_ssram ; /* Info about ssram */ + unsigned char ioc3_nvram ; /* Info about nvram */ + klinfo_t ioc3_superio ; /* Info about superio */ + klconf_off_t ioc3_tty_off ; + klinfo_t ioc3_enet ; + klconf_off_t ioc3_enet_off ; + klconf_off_t ioc3_kbd_off ; +} klioc3_t ; + +#define MAX_VME_SLOTS 8 + +typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */ + klinfo_t vmeb_info ; + vmeb_t vmeb_specific ; + klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ +} klvmeb_t ; + +typedef struct klvmed_s { /* VME DEVICE - VME BOARD */ + klinfo_t vmed_info ; + vmed_t vmed_specific ; + klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ +} klvmed_t ; + +#define ROUTER_VECTOR_VERS 2 + +/* XXX - Don't we need the number of ports here?!? */ +typedef struct klrou_s { /* ROUTER */ + klinfo_t rou_info ; + unsigned int rou_flags ; /* PCFG_ROUTER_xxx flags */ + nic_t rou_box_nic ; /* nic of the containing module */ + klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */ + klconf_off_t rou_mfg_nic ; /* MFG NIC string */ + u64 rou_vector; /* vector from master node */ +} klrou_t ; + +/* + * Graphics Controller/Device + * + * (IP27/IO6) Prom versions 6.13 (and 6.5.1 kernels) and earlier + * used a couple different structures to store graphics information. + * For compatibility reasons, the newer data structure preserves some + * of the layout so that fields that are used in the old versions remain + * in the same place (with the same info). Determination of what version + * of this structure we have is done by checking the cookie field. + */ +#define KLGFX_COOKIE 0x0c0de000 + +typedef struct klgfx_s { /* GRAPHICS Device */ + klinfo_t gfx_info; + klconf_off_t old_gndevs; /* for compatibility with older proms */ + klconf_off_t old_gdoff0; /* for compatibility with older proms */ + unsigned int cookie; /* for compatibility with older proms */ + unsigned int moduleslot; + struct klgfx_s *gfx_next_pipe; + graphics_t gfx_specific; + klconf_off_t pad0; /* for compatibility with older proms */ + klconf_off_t gfx_mfg_nic; +} klgfx_t; + +typedef struct klxthd_s { + klinfo_t xthd_info ; + klconf_off_t xthd_mfg_nic ; /* MFG NIC string */ +} klxthd_t ; + +typedef struct kltpu_s { /* TPU board */ + klinfo_t tpu_info ; + klconf_off_t tpu_mfg_nic ; /* MFG NIC string */ +} kltpu_t ; + +typedef struct klgsn_s { /* GSN board */ + klinfo_t gsn_info ; + klconf_off_t gsn_mfg_nic ; /* MFG NIC string */ +} klgsn_t ; + +#define MAX_SCSI_DEVS 16 + +/* + * NOTE: THis is the max sized kl* structure and is used in klmalloc.c + * to allocate space of type COMPONENT. Make sure that if the size of + * any other component struct becomes more than this, then redefine + * that as the size to be klmalloced. + */ + +typedef struct klscsi_s { /* SCSI Controller */ + klinfo_t scsi_info ; + scsi_t scsi_specific ; + unsigned char scsi_numdevs ; + klconf_off_t scsi_devinfo[MAX_SCSI_DEVS] ; +} klscsi_t ; + +typedef struct klscdev_s { /* SCSI device */ + klinfo_t scdev_info ; + struct scsidisk_data *scdev_cfg ; /* driver fills up this */ +} klscdev_t ; + +typedef struct klttydev_s { /* TTY device */ + klinfo_t ttydev_info ; + struct terminal_data *ttydev_cfg ; /* driver fills up this */ +} klttydev_t ; + +typedef struct klenetdev_s { /* ENET device */ + klinfo_t enetdev_info ; + struct net_data *enetdev_cfg ; /* driver fills up this */ +} klenetdev_t ; + +typedef struct klkbddev_s { /* KBD device */ + klinfo_t kbddev_info ; + struct keyboard_data *kbddev_cfg ; /* driver fills up this */ +} klkbddev_t ; + +typedef struct klmsdev_s { /* mouse device */ + klinfo_t msdev_info ; + void *msdev_cfg ; +} klmsdev_t ; + +#define MAX_FDDI_DEVS 10 /* XXX Is this true */ + +typedef struct klfddi_s { /* FDDI */ + klinfo_t fddi_info ; + fddi_t fddi_specific ; + klconf_off_t fddi_devinfo[MAX_FDDI_DEVS] ; +} klfddi_t ; + +typedef struct klmio_s { /* MIO */ + klinfo_t mio_info ; + mio_t mio_specific ; +} klmio_t ; + + +typedef union klcomp_s { + klcpu_t kc_cpu; + klhub_t kc_hub; + klmembnk_t kc_mem; + klxbow_t kc_xbow; + klbri_t kc_bri; + klioc3_t kc_ioc3; + klvmeb_t kc_vmeb; + klvmed_t kc_vmed; + klrou_t kc_rou; + klgfx_t kc_gfx; + klscsi_t kc_scsi; + klscdev_t kc_scsi_dev; + klfddi_t kc_fddi; + klmio_t kc_mio; + klmod_serial_num_t kc_snum ; +} klcomp_t; + +typedef union kldev_s { /* for device structure allocation */ + klscdev_t kc_scsi_dev ; + klttydev_t kc_tty_dev ; + klenetdev_t kc_enet_dev ; + klkbddev_t kc_kbd_dev ; +} kldev_t ; + +/* Data structure interface routines. TBD */ + +/* Include launch info in this file itself? TBD */ + +/* + * TBD - Can the ARCS and device driver related info also be included in the + * KLCONFIG area. On the IO4PROM, prom device driver info is part of cfgnode_t + * structure, viz private to the IO4prom. + */ + +/* + * TBD - Allocation issues. + * + * Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component, + * errinfo and allocate from them, or have a single heap and allocate all + * structures from it. Debug is easier in the former method since we can + * dump all similar structs in one command, but there will be lots of holes, + * in memory and max limits are needed for number of structures. + * Another way to make it organized, is to have a union of all components + * and allocate a aligned chunk of memory greater than the biggest + * component. + */ + +typedef union { + lboard_t *lbinfo ; +} biptr_t ; + + +#define BRI_PER_XBOW 6 +#define PCI_PER_BRI 8 +#define DEV_PER_PCI 16 + + +/* Virtual dipswitch values (starting from switch "7"): */ + +#define VDS_NOGFX 0x8000 /* Don't enable gfx and autoboot */ +#define VDS_NOMP 0x100 /* Don't start slave processors */ +#define VDS_MANUMODE 0x80 /* Manufacturing mode */ +#define VDS_NOARB 0x40 /* No bootmaster arbitration */ +#define VDS_PODMODE 0x20 /* Go straight to POD mode */ +#define VDS_NO_DIAGS 0x10 /* Don't run any diags after BM arb */ +#define VDS_DEFAULTS 0x08 /* Use default environment values */ +#define VDS_NOMEMCLEAR 0x04 /* Don't run mem cfg code */ +#define VDS_2ND_IO4 0x02 /* Boot from the second IO4 */ +#define VDS_DEBUG_PROM 0x01 /* Print PROM debugging messages */ + +/* external declarations of Linux kernel functions. */ + +extern lboard_t *find_lboard(lboard_t *start, unsigned char type); +extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type); +extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type); +extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int); +extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class); + + +extern klcpu_t *sn_get_cpuinfo(cpuid_t cpu); + +#endif /* _ASM_SN_KLCONFIG_H */ diff --git a/arch/mips/include/asm/sn/kldir.h b/arch/mips/include/asm/sn/kldir.h new file mode 100644 index 000000000000..1327e12e9645 --- /dev/null +++ b/arch/mips/include/asm/sn/kldir.h @@ -0,0 +1,217 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX <sys/SN/kldir.h>, revision 1.21. + * + * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 1999, 2000 by Ralf Baechle + */ +#ifndef _ASM_SN_KLDIR_H +#define _ASM_SN_KLDIR_H + + +/* + * The kldir memory area resides at a fixed place in each node's memory and + * provides pointers to most other IP27 memory areas. This allows us to + * resize and/or relocate memory areas at a later time without breaking all + * firmware and kernels that use them. Indices in the array are + * permanently dedicated to areas listed below. Some memory areas (marked + * below) reside at a permanently fixed location, but are included in the + * directory for completeness. + */ + +#define KLDIR_MAGIC 0x434d5f53505f5357 + +/* + * The upper portion of the memory map applies during boot + * only and is overwritten by IRIX/SYMMON. + * + * MEMORY MAP PER NODE + * + * 0x2000000 (32M) +-----------------------------------------+ + * | IO6 BUFFERS FOR FLASH ENET IOC3 | + * 0x1F80000 (31.5M) +-----------------------------------------+ + * | IO6 TEXT/DATA/BSS/stack | + * 0x1C00000 (30M) +-----------------------------------------+ + * | IO6 PROM DEBUG TEXT/DATA/BSS/stack | + * 0x0800000 (28M) +-----------------------------------------+ + * | IP27 PROM TEXT/DATA/BSS/stack | + * 0x1B00000 (27M) +-----------------------------------------+ + * | IP27 CFG | + * 0x1A00000 (26M) +-----------------------------------------+ + * | Graphics PROM | + * 0x1800000 (24M) +-----------------------------------------+ + * | 3rd Party PROM drivers | + * 0x1600000 (22M) +-----------------------------------------+ + * | | + * | Free | + * | | + * +-----------------------------------------+ + * | UNIX DEBUG Version | + * 0x190000 (2M--) +-----------------------------------------+ + * | SYMMON | + * | (For UNIX Debug only) | + * 0x34000 (208K) +-----------------------------------------+ + * | SYMMON STACK [NUM_CPU_PER_NODE] | + * | (For UNIX Debug only) | + * 0x25000 (148K) +-----------------------------------------+ + * | KLCONFIG - II (temp) | + * | | + * | ---------------------------- | + * | | + * | UNIX NON-DEBUG Version | + * 0x19000 (100K) +-----------------------------------------+ + * + * + * The lower portion of the memory map contains information that is + * permanent and is used by the IP27PROM, IO6PROM and IRIX. + * + * 0x19000 (100K) +-----------------------------------------+ + * | | + * | PI Error Spools (32K) | + * | | + * 0x12000 (72K) +-----------------------------------------+ + * | Unused | + * 0x11c00 (71K) +-----------------------------------------+ + * | CPU 1 NMI Eframe area | + * 0x11a00 (70.5K) +-----------------------------------------+ + * | CPU 0 NMI Eframe area | + * 0x11800 (70K) +-----------------------------------------+ + * | CPU 1 NMI Register save area | + * 0x11600 (69.5K) +-----------------------------------------+ + * | CPU 0 NMI Register save area | + * 0x11400 (69K) +-----------------------------------------+ + * | GDA (1k) | + * 0x11000 (68K) +-----------------------------------------+ + * | Early cache Exception stack | + * | and/or | + * | kernel/io6prom nmi registers | + * 0x10800 (66k) +-----------------------------------------+ + * | cache error eframe | + * 0x10400 (65K) +-----------------------------------------+ + * | Exception Handlers (UALIAS copy) | + * 0x10000 (64K) +-----------------------------------------+ + * | | + * | | + * | KLCONFIG - I (permanent) (48K) | + * | | + * | | + * | | + * 0x4000 (16K) +-----------------------------------------+ + * | NMI Handler (Protected Page) | + * 0x3000 (12K) +-----------------------------------------+ + * | ARCS PVECTORS (master node only) | + * 0x2c00 (11K) +-----------------------------------------+ + * | ARCS TVECTORS (master node only) | + * 0x2800 (10K) +-----------------------------------------+ + * | LAUNCH [NUM_CPU] | + * 0x2400 (9K) +-----------------------------------------+ + * | Low memory directory (KLDIR) | + * 0x2000 (8K) +-----------------------------------------+ + * | ARCS SPB (1K) | + * 0x1000 (4K) +-----------------------------------------+ + * | Early cache Exception stack | + * | and/or | + * | kernel/io6prom nmi registers | + * 0x800 (2k) +-----------------------------------------+ + * | cache error eframe | + * 0x400 (1K) +-----------------------------------------+ + * | Exception Handlers | + * 0x0 (0K) +-----------------------------------------+ + */ + +#ifdef __ASSEMBLY__ +#define KLDIR_OFF_MAGIC 0x00 +#define KLDIR_OFF_OFFSET 0x08 +#define KLDIR_OFF_POINTER 0x10 +#define KLDIR_OFF_SIZE 0x18 +#define KLDIR_OFF_COUNT 0x20 +#define KLDIR_OFF_STRIDE 0x28 +#endif /* __ASSEMBLY__ */ + +/* + * This is defined here because IP27_SYMMON_STK_SIZE must be at least what + * we define here. Since it's set up in the prom. We can't redefine it later + * and expect more space to be allocated. The way to find out the true size + * of the symmon stacks is to divide SYMMON_STK_SIZE by SYMMON_STK_STRIDE + * for a particular node. + */ +#define SYMMON_STACK_SIZE 0x8000 + +#if defined(PROM) + +/* + * These defines are prom version dependent. No code other than the IP27 + * prom should attempt to use these values. + */ +#define IP27_LAUNCH_OFFSET 0x2400 +#define IP27_LAUNCH_SIZE 0x400 +#define IP27_LAUNCH_COUNT 2 +#define IP27_LAUNCH_STRIDE 0x200 + +#define IP27_KLCONFIG_OFFSET 0x4000 +#define IP27_KLCONFIG_SIZE 0xc000 +#define IP27_KLCONFIG_COUNT 1 +#define IP27_KLCONFIG_STRIDE 0 + +#define IP27_NMI_OFFSET 0x3000 +#define IP27_NMI_SIZE 0x40 +#define IP27_NMI_COUNT 2 +#define IP27_NMI_STRIDE 0x40 + +#define IP27_PI_ERROR_OFFSET 0x12000 +#define IP27_PI_ERROR_SIZE 0x4000 +#define IP27_PI_ERROR_COUNT 1 +#define IP27_PI_ERROR_STRIDE 0 + +#define IP27_SYMMON_STK_OFFSET 0x25000 +#define IP27_SYMMON_STK_SIZE 0xe000 +#define IP27_SYMMON_STK_COUNT 2 +/* IP27_SYMMON_STK_STRIDE must be >= SYMMON_STACK_SIZE */ +#define IP27_SYMMON_STK_STRIDE 0x7000 + +#define IP27_FREEMEM_OFFSET 0x19000 +#define IP27_FREEMEM_SIZE -1 +#define IP27_FREEMEM_COUNT 1 +#define IP27_FREEMEM_STRIDE 0 + +#endif /* PROM */ +/* + * There will be only one of these in a partition so the IO6 must set it up. + */ +#define IO6_GDA_OFFSET 0x11000 +#define IO6_GDA_SIZE 0x400 +#define IO6_GDA_COUNT 1 +#define IO6_GDA_STRIDE 0 + +/* + * save area of kernel nmi regs in the prom format + */ +#define IP27_NMI_KREGS_OFFSET 0x11400 +#define IP27_NMI_KREGS_CPU_SIZE 0x200 +/* + * save area of kernel nmi regs in eframe format + */ +#define IP27_NMI_EFRAME_OFFSET 0x11800 +#define IP27_NMI_EFRAME_SIZE 0x200 + +#define KLDIR_ENT_SIZE 0x40 +#define KLDIR_MAX_ENTRIES (0x400 / 0x40) + +#ifndef __ASSEMBLY__ +typedef struct kldir_ent_s { + u64 magic; /* Indicates validity of entry */ + off_t offset; /* Offset from start of node space */ + unsigned long pointer; /* Pointer to area in some cases */ + size_t size; /* Size in bytes */ + u64 count; /* Repeat count if array, 1 if not */ + size_t stride; /* Stride if array, 0 if not */ + char rsvd[16]; /* Pad entry to 0x40 bytes */ + /* NOTE: These 16 bytes are used in the Partition KLDIR + entry to store partition info. Refer to klpart.h for this. */ +} kldir_ent_t; +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_SN_KLDIR_H */ diff --git a/arch/mips/include/asm/sn/klkernvars.h b/arch/mips/include/asm/sn/klkernvars.h new file mode 100644 index 000000000000..5de4c5e8ab30 --- /dev/null +++ b/arch/mips/include/asm/sn/klkernvars.h @@ -0,0 +1,29 @@ +/* + * File ported from IRIX to Linux by Kanoj Sarcar, 06/08/00. + * Copyright 2000 Silicon Graphics, Inc. + */ +#ifndef __ASM_SN_KLKERNVARS_H +#define __ASM_SN_KLKERNVARS_H + +#define KV_MAGIC_OFFSET 0x0 +#define KV_RO_NASID_OFFSET 0x4 +#define KV_RW_NASID_OFFSET 0x6 + +#define KV_MAGIC 0x5f4b565f + +#ifndef __ASSEMBLY__ + +#include <asm/sn/types.h> + +typedef struct kern_vars_s { + int kv_magic; + nasid_t kv_ro_nasid; + nasid_t kv_rw_nasid; + unsigned long kv_ro_baseaddr; + unsigned long kv_rw_baseaddr; +} kern_vars_t; + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_SN_KLKERNVARS_H */ + diff --git a/arch/mips/include/asm/sn/launch.h b/arch/mips/include/asm/sn/launch.h new file mode 100644 index 000000000000..b7c2226312c6 --- /dev/null +++ b/arch/mips/include/asm/sn/launch.h @@ -0,0 +1,106 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc. + * Copyright (C) 2000 by Colin Ngam + */ +#ifndef _ASM_SN_LAUNCH_H +#define _ASM_SN_LAUNCH_H + +#include <asm/sn/types.h> +#include <asm/sn/addrs.h> + +/* + * The launch data structure resides at a fixed place in each node's memory + * and is used to communicate between the master processor and the slave + * processors. + * + * The master stores launch parameters in the launch structure + * corresponding to a target processor that is in a slave loop, then sends + * an interrupt to the slave processor. The slave calls the desired + * function, then returns to the slave loop. The master may poll or wait + * for the slaves to finish. + * + * There is an array of launch structures, one per CPU on the node. One + * interrupt level is used per local CPU. + */ + +#define LAUNCH_MAGIC 0xaddbead2addbead3 +#ifdef CONFIG_SGI_IP27 +#define LAUNCH_SIZEOF 0x100 +#define LAUNCH_PADSZ 0xa0 +#endif + +#define LAUNCH_OFF_MAGIC 0x00 /* Struct offsets for assembly */ +#define LAUNCH_OFF_BUSY 0x08 +#define LAUNCH_OFF_CALL 0x10 +#define LAUNCH_OFF_CALLC 0x18 +#define LAUNCH_OFF_CALLPARM 0x20 +#define LAUNCH_OFF_STACK 0x28 +#define LAUNCH_OFF_GP 0x30 +#define LAUNCH_OFF_BEVUTLB 0x38 +#define LAUNCH_OFF_BEVNORMAL 0x40 +#define LAUNCH_OFF_BEVECC 0x48 + +#define LAUNCH_STATE_DONE 0 /* Return value of LAUNCH_POLL */ +#define LAUNCH_STATE_SENT 1 +#define LAUNCH_STATE_RECD 2 + +/* + * The launch routine is called only if the complement address is correct. + * + * Before control is transferred to a routine, the complement address + * is zeroed (invalidated) to prevent an accidental call from a spurious + * interrupt. + * + * The slave_launch routine turns on the BUSY flag, and the slave loop + * clears the BUSY flag after control is returned to it. + */ + +#ifndef __ASSEMBLY__ + +typedef int launch_state_t; +typedef void (*launch_proc_t)(u64 call_parm); + +typedef struct launch_s { + volatile u64 magic; /* Magic number */ + volatile u64 busy; /* Slave currently active */ + volatile launch_proc_t call_addr; /* Func. for slave to call */ + volatile u64 call_addr_c; /* 1's complement of call_addr*/ + volatile u64 call_parm; /* Single parm passed to call*/ + volatile void *stack_addr; /* Stack pointer for slave function */ + volatile void *gp_addr; /* Global pointer for slave func. */ + volatile char *bevutlb;/* Address of bev utlb ex handler */ + volatile char *bevnormal;/*Address of bev normal ex handler */ + volatile char *bevecc;/* Address of bev cache err handler */ + volatile char pad[160]; /* Pad to LAUNCH_SIZEOF */ +} launch_t; + +/* + * PROM entry points for launch routines are determined by IPxxprom/start.s + */ + +#define LAUNCH_SLAVE (*(void (*)(int nasid, int cpu, \ + launch_proc_t call_addr, \ + u64 call_parm, \ + void *stack_addr, \ + void *gp_addr)) \ + IP27PROM_LAUNCHSLAVE) + +#define LAUNCH_WAIT (*(void (*)(int nasid, int cpu, int timeout_msec)) \ + IP27PROM_WAITSLAVE) + +#define LAUNCH_POLL (*(launch_state_t (*)(int nasid, int cpu)) \ + IP27PROM_POLLSLAVE) + +#define LAUNCH_LOOP (*(void (*)(void)) \ + IP27PROM_SLAVELOOP) + +#define LAUNCH_FLASH (*(void (*)(void)) \ + IP27PROM_FLASHLEDS) + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_SN_LAUNCH_H */ diff --git a/arch/mips/include/asm/sn/mapped_kernel.h b/arch/mips/include/asm/sn/mapped_kernel.h new file mode 100644 index 000000000000..721496a0bb92 --- /dev/null +++ b/arch/mips/include/asm/sn/mapped_kernel.h @@ -0,0 +1,54 @@ +/* + * File created by Kanoj Sarcar 06/06/00. + * Copyright 2000 Silicon Graphics, Inc. + */ +#ifndef __ASM_SN_MAPPED_KERNEL_H +#define __ASM_SN_MAPPED_KERNEL_H + +#include <linux/mmzone.h> + +/* + * Note on how mapped kernels work: the text and data section is + * compiled at cksseg segment (LOADADDR = 0xc001c000), and the + * init/setup/data section gets a 16M virtual address bump in the + * ld.script file (so that tlblo0 and tlblo1 maps the sections). + * The vmlinux.64 section addresses are put in the xkseg range + * using the change-addresses makefile option. Use elfdump -of + * on IRIX to see where the sections go. The Origin loader loads + * the two sections contiguously in physical memory. The loader + * sets the entry point into kernel_entry using a xkphys address, + * but instead of using 0xa800000001160000, it uses the address + * 0xa800000000160000, which is where it physically loaded that + * code. So no jumps can be done before we have switched to using + * cksseg addresses. + */ +#include <asm/addrspace.h> + +#define REP_BASE CAC_BASE + +#ifdef CONFIG_MAPPED_KERNEL + +#define MAPPED_ADDR_RO_TO_PHYS(x) (x - REP_BASE) +#define MAPPED_ADDR_RW_TO_PHYS(x) (x - REP_BASE - 16777216) + +#define MAPPED_KERN_RO_PHYSBASE(n) (hub_data(n)->kern_vars.kv_ro_baseaddr) +#define MAPPED_KERN_RW_PHYSBASE(n) (hub_data(n)->kern_vars.kv_rw_baseaddr) + +#define MAPPED_KERN_RO_TO_PHYS(x) \ + ((unsigned long)MAPPED_ADDR_RO_TO_PHYS(x) | \ + MAPPED_KERN_RO_PHYSBASE(get_compact_nodeid())) +#define MAPPED_KERN_RW_TO_PHYS(x) \ + ((unsigned long)MAPPED_ADDR_RW_TO_PHYS(x) | \ + MAPPED_KERN_RW_PHYSBASE(get_compact_nodeid())) + +#else /* CONFIG_MAPPED_KERNEL */ + +#define MAPPED_KERN_RO_TO_PHYS(x) (x - REP_BASE) +#define MAPPED_KERN_RW_TO_PHYS(x) (x - REP_BASE) + +#endif /* CONFIG_MAPPED_KERNEL */ + +#define MAPPED_KERN_RO_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RO_TO_PHYS(x)) +#define MAPPED_KERN_RW_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RW_TO_PHYS(x)) + +#endif /* __ASM_SN_MAPPED_KERNEL_H */ diff --git a/arch/mips/include/asm/sn/nmi.h b/arch/mips/include/asm/sn/nmi.h new file mode 100644 index 000000000000..6b7b0b5f3729 --- /dev/null +++ b/arch/mips/include/asm/sn/nmi.h @@ -0,0 +1,125 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997 Silicon Graphics, Inc. + */ +#ifndef __ASM_SN_NMI_H +#define __ASM_SN_NMI_H + +#ident "$Revision: 1.5 $" + +#include <asm/sn/addrs.h> + +/* + * The launch data structure resides at a fixed place in each node's memory + * and is used to communicate between the master processor and the slave + * processors. + * + * The master stores launch parameters in the launch structure + * corresponding to a target processor that is in a slave loop, then sends + * an interrupt to the slave processor. The slave calls the desired + * function, followed by an optional rendezvous function, then returns to + * the slave loop. The master does not wait for the slaves before + * returning. + * + * There is an array of launch structures, one per CPU on the node. One + * interrupt level is used per CPU. + */ + +#define NMI_MAGIC 0x48414d4d455201 +#define NMI_SIZEOF 0x40 + +#define NMI_OFF_MAGIC 0x00 /* Struct offsets for assembly */ +#define NMI_OFF_FLAGS 0x08 +#define NMI_OFF_CALL 0x10 +#define NMI_OFF_CALLC 0x18 +#define NMI_OFF_CALLPARM 0x20 +#define NMI_OFF_GMASTER 0x28 + +/* + * The NMI routine is called only if the complement address is + * correct. + * + * Before control is transferred to a routine, the complement address + * is zeroed (invalidated) to prevent an accidental call from a spurious + * interrupt. + * + */ + +#ifndef __ASSEMBLY__ + +typedef struct nmi_s { + volatile unsigned long magic; /* Magic number */ + volatile unsigned long flags; /* Combination of flags above */ + volatile void *call_addr; /* Routine for slave to call */ + volatile void *call_addr_c; /* 1's complement of address */ + volatile void *call_parm; /* Single parm passed to call */ + volatile unsigned long gmaster; /* Flag true only on global master*/ +} nmi_t; + +#endif /* !__ASSEMBLY__ */ + +/* Following definitions are needed both in the prom & the kernel + * to identify the format of the nmi cpu register save area in the + * low memory on each node. + */ +#ifndef __ASSEMBLY__ + +struct reg_struct { + unsigned long gpr[32]; + unsigned long sr; + unsigned long cause; + unsigned long epc; + unsigned long badva; + unsigned long error_epc; + unsigned long cache_err; + unsigned long nmi_sr; +}; + +#endif /* !__ASSEMBLY__ */ + +/* These are the assembly language offsets into the reg_struct structure */ + +#define R0_OFF 0x0 +#define R1_OFF 0x8 +#define R2_OFF 0x10 +#define R3_OFF 0x18 +#define R4_OFF 0x20 +#define R5_OFF 0x28 +#define R6_OFF 0x30 +#define R7_OFF 0x38 +#define R8_OFF 0x40 +#define R9_OFF 0x48 +#define R10_OFF 0x50 +#define R11_OFF 0x58 +#define R12_OFF 0x60 +#define R13_OFF 0x68 +#define R14_OFF 0x70 +#define R15_OFF 0x78 +#define R16_OFF 0x80 +#define R17_OFF 0x88 +#define R18_OFF 0x90 +#define R19_OFF 0x98 +#define R20_OFF 0xa0 +#define R21_OFF 0xa8 +#define R22_OFF 0xb0 +#define R23_OFF 0xb8 +#define R24_OFF 0xc0 +#define R25_OFF 0xc8 +#define R26_OFF 0xd0 +#define R27_OFF 0xd8 +#define R28_OFF 0xe0 +#define R29_OFF 0xe8 +#define R30_OFF 0xf0 +#define R31_OFF 0xf8 +#define SR_OFF 0x100 +#define CAUSE_OFF 0x108 +#define EPC_OFF 0x110 +#define BADVA_OFF 0x118 +#define ERROR_EPC_OFF 0x120 +#define CACHE_ERR_OFF 0x128 +#define NMISR_OFF 0x130 + +#endif /* __ASM_SN_NMI_H */ diff --git a/arch/mips/include/asm/sn/sn0/addrs.h b/arch/mips/include/asm/sn/sn0/addrs.h new file mode 100644 index 000000000000..b06190093bbc --- /dev/null +++ b/arch/mips/include/asm/sn/sn0/addrs.h @@ -0,0 +1,288 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX <sys/SN/SN0/addrs.h>, revision 1.126. + * + * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_SN_SN0_ADDRS_H +#define _ASM_SN_SN0_ADDRS_H + + +/* + * SN0 (on a T5) Address map + * + * This file contains a set of definitions and macros which are used + * to reference into the major address spaces (CAC, HSPEC, IO, MSPEC, + * and UNCAC) used by the SN0 architecture. It also contains addresses + * for "major" statically locatable PROM/Kernel data structures, such as + * the partition table, the configuration data structure, etc. + * We make an implicit assumption that the processor using this file + * follows the R10K's provisions for specifying uncached attributes; + * should this change, the base registers may very well become processor- + * dependent. + * + * For more information on the address spaces, see the "Local Resources" + * chapter of the Hub specification. + * + * NOTE: This header file is included both by C and by assembler source + * files. Please bracket any language-dependent definitions + * appropriately. + */ + +/* + * Some of the macros here need to be casted to appropriate types when used + * from C. They definitely must not be casted from assembly language so we + * use some new ANSI preprocessor stuff to paste these on where needed. + */ + +/* + * The following couple of definitions will eventually need to be variables, + * since the amount of address space assigned to each node depends on + * whether the system is running in N-mode (more nodes with less memory) + * or M-mode (fewer nodes with more memory). We expect that it will + * be a while before we need to make this decision dynamically, though, + * so for now we just use defines bracketed by an ifdef. + */ + +#ifdef CONFIG_SGI_SN_N_MODE + +#define NODE_SIZE_BITS 31 +#define BWIN_SIZE_BITS 28 + +#define NASID_BITS 9 +#define NASID_BITMASK (0x1ffLL) +#define NASID_SHFT 31 +#define NASID_META_BITS 5 +#define NASID_LOCAL_BITS 4 + +#define BDDIR_UPPER_MASK (UINT64_CAST 0x7ffff << 10) +#define BDECC_UPPER_MASK (UINT64_CAST 0x3ffffff << 3) + +#else /* !defined(CONFIG_SGI_SN_N_MODE), assume that M-mode is desired */ + +#define NODE_SIZE_BITS 32 +#define BWIN_SIZE_BITS 29 + +#define NASID_BITMASK (0xffLL) +#define NASID_BITS 8 +#define NASID_SHFT 32 +#define NASID_META_BITS 4 +#define NASID_LOCAL_BITS 4 + +#define BDDIR_UPPER_MASK (UINT64_CAST 0xfffff << 10) +#define BDECC_UPPER_MASK (UINT64_CAST 0x7ffffff << 3) + +#endif /* !defined(CONFIG_SGI_SN_N_MODE) */ + +#define NODE_ADDRSPACE_SIZE (UINT64_CAST 1 << NODE_SIZE_BITS) + +#define NASID_MASK (UINT64_CAST NASID_BITMASK << NASID_SHFT) +#define NASID_GET(_pa) (int) ((UINT64_CAST (_pa) >> \ + NASID_SHFT) & NASID_BITMASK) + +#if !defined(__ASSEMBLY__) + +#define NODE_SWIN_BASE(nasid, widget) \ + ((widget == 0) ? NODE_BWIN_BASE((nasid), SWIN0_BIGWIN) \ + : RAW_NODE_SWIN_BASE(nasid, widget)) +#else /* __ASSEMBLY__ */ +#define NODE_SWIN_BASE(nasid, widget) \ + (NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS)) +#endif /* __ASSEMBLY__ */ + +/* + * The following definitions pertain to the IO special address + * space. They define the location of the big and little windows + * of any given node. + */ + +#define BWIN_INDEX_BITS 3 +#define BWIN_SIZE (UINT64_CAST 1 << BWIN_SIZE_BITS) +#define BWIN_SIZEMASK (BWIN_SIZE - 1) +#define BWIN_WIDGET_MASK 0x7 +#define NODE_BWIN_BASE0(nasid) (NODE_IO_BASE(nasid) + BWIN_SIZE) +#define NODE_BWIN_BASE(nasid, bigwin) (NODE_BWIN_BASE0(nasid) + \ + (UINT64_CAST(bigwin) << BWIN_SIZE_BITS)) + +#define BWIN_WIDGETADDR(addr) ((addr) & BWIN_SIZEMASK) +#define BWIN_WINDOWNUM(addr) (((addr) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK) +/* + * Verify if addr belongs to large window address of node with "nasid" + * + * + * NOTE: "addr" is expected to be XKPHYS address, and NOT physical + * address + * + * + */ + +#define NODE_BWIN_ADDR(nasid, addr) \ + (((addr) >= NODE_BWIN_BASE0(nasid)) && \ + ((addr) < (NODE_BWIN_BASE(nasid, HUB_NUM_BIG_WINDOW) + \ + BWIN_SIZE))) + +/* + * The following define the major position-independent aliases used + * in SN0. + * CALIAS -- Varies in size, points to the first n bytes of memory + * on the reader's node. + */ + +#define CALIAS_BASE CAC_BASE + + + +#define BRIDGE_REG_PTR(_base, _off) ((volatile bridgereg_t *) \ + ((__psunsigned_t)(_base) + (__psunsigned_t)(_off))) + +#define SN0_WIDGET_BASE(_nasid, _wid) (NODE_SWIN_BASE((_nasid), (_wid))) + +/* Turn on sable logging for the processors whose bits are set. */ +#define SABLE_LOG_TRIGGER(_map) + +#ifndef __ASSEMBLY__ +#define KERN_NMI_ADDR(nasid, slice) \ + TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET + \ + (IP27_NMI_KREGS_CPU_SIZE * (slice))) +#endif /* !__ASSEMBLY__ */ + +#ifdef PROM + +#define MISC_PROM_BASE PHYS_TO_K0(0x01300000) +#define MISC_PROM_SIZE 0x200000 + +#define DIAG_BASE PHYS_TO_K0(0x01500000) +#define DIAG_SIZE 0x300000 + +#define ROUTE_BASE PHYS_TO_K0(0x01800000) +#define ROUTE_SIZE 0x200000 + +#define IP27PROM_FLASH_HDR PHYS_TO_K0(0x01300000) +#define IP27PROM_FLASH_DATA PHYS_TO_K0(0x01301000) +#define IP27PROM_CORP_MAX 32 +#define IP27PROM_CORP PHYS_TO_K0(0x01800000) +#define IP27PROM_CORP_SIZE 0x10000 +#define IP27PROM_CORP_STK PHYS_TO_K0(0x01810000) +#define IP27PROM_CORP_STKSIZE 0x2000 +#define IP27PROM_DECOMP_BUF PHYS_TO_K0(0x01900000) +#define IP27PROM_DECOMP_SIZE 0xfff00 + +#define IP27PROM_BASE PHYS_TO_K0(0x01a00000) +#define IP27PROM_BASE_MAPPED (UNCAC_BASE | 0x1fc00000) +#define IP27PROM_SIZE_MAX 0x100000 + +#define IP27PROM_PCFG PHYS_TO_K0(0x01b00000) +#define IP27PROM_PCFG_SIZE 0xd0000 +#define IP27PROM_ERRDMP PHYS_TO_K1(0x01bd0000) +#define IP27PROM_ERRDMP_SIZE 0xf000 + +#define IP27PROM_INIT_START PHYS_TO_K1(0x01bd0000) +#define IP27PROM_CONSOLE PHYS_TO_K1(0x01bdf000) +#define IP27PROM_CONSOLE_SIZE 0x200 +#define IP27PROM_NETUART PHYS_TO_K1(0x01bdf200) +#define IP27PROM_NETUART_SIZE 0x100 +#define IP27PROM_UNUSED1 PHYS_TO_K1(0x01bdf300) +#define IP27PROM_UNUSED1_SIZE 0x500 +#define IP27PROM_ELSC_BASE_A PHYS_TO_K0(0x01bdf800) +#define IP27PROM_ELSC_BASE_B PHYS_TO_K0(0x01bdfc00) +#define IP27PROM_STACK_A PHYS_TO_K0(0x01be0000) +#define IP27PROM_STACK_B PHYS_TO_K0(0x01bf0000) +#define IP27PROM_STACK_SHFT 16 +#define IP27PROM_STACK_SIZE (1 << IP27PROM_STACK_SHFT) +#define IP27PROM_INIT_END PHYS_TO_K0(0x01c00000) + +#define SLAVESTACK_BASE PHYS_TO_K0(0x01580000) +#define SLAVESTACK_SIZE 0x40000 + +#define ENETBUFS_BASE PHYS_TO_K0(0x01f80000) +#define ENETBUFS_SIZE 0x20000 + +#define IO6PROM_BASE PHYS_TO_K0(0x01c00000) +#define IO6PROM_SIZE 0x400000 +#define IO6PROM_BASE_MAPPED (UNCAC_BASE | 0x11c00000) +#define IO6DPROM_BASE PHYS_TO_K0(0x01c00000) +#define IO6DPROM_SIZE 0x200000 + +#define NODEBUGUNIX_ADDR PHYS_TO_K0(0x00019000) +#define DEBUGUNIX_ADDR PHYS_TO_K0(0x00100000) + +#define IP27PROM_INT_LAUNCH 10 /* and 11 */ +#define IP27PROM_INT_NETUART 12 /* through 17 */ + +#endif /* PROM */ + +/* + * needed by symmon so it needs to be outside #if PROM + */ +#define IP27PROM_ELSC_SHFT 10 +#define IP27PROM_ELSC_SIZE (1 << IP27PROM_ELSC_SHFT) + +/* + * This address is used by IO6PROM to build MemoryDescriptors of + * free memory. This address is important since unix gets loaded + * at this address, and this memory has to be FREE if unix is to + * be loaded. + */ + +#define FREEMEM_BASE PHYS_TO_K0(0x2000000) + +#define IO6PROM_STACK_SHFT 14 /* stack per cpu */ +#define IO6PROM_STACK_SIZE (1 << IO6PROM_STACK_SHFT) + +/* + * IP27 PROM vectors + */ + +#define IP27PROM_ENTRY PHYS_TO_COMPATK1(0x1fc00000) +#define IP27PROM_RESTART PHYS_TO_COMPATK1(0x1fc00008) +#define IP27PROM_SLAVELOOP PHYS_TO_COMPATK1(0x1fc00010) +#define IP27PROM_PODMODE PHYS_TO_COMPATK1(0x1fc00018) +#define IP27PROM_IOC3UARTPOD PHYS_TO_COMPATK1(0x1fc00020) +#define IP27PROM_FLASHLEDS PHYS_TO_COMPATK1(0x1fc00028) +#define IP27PROM_REPOD PHYS_TO_COMPATK1(0x1fc00030) +#define IP27PROM_LAUNCHSLAVE PHYS_TO_COMPATK1(0x1fc00038) +#define IP27PROM_WAITSLAVE PHYS_TO_COMPATK1(0x1fc00040) +#define IP27PROM_POLLSLAVE PHYS_TO_COMPATK1(0x1fc00048) + +#define KL_UART_BASE LOCAL_HUB_ADDR(MD_UREG0_0) /* base of UART regs */ +#define KL_UART_CMD LOCAL_HUB_ADDR(MD_UREG0_0) /* UART command reg */ +#define KL_UART_DATA LOCAL_HUB_ADDR(MD_UREG0_1) /* UART data reg */ +#define KL_I2C_REG MD_UREG0_0 /* I2C reg */ + +#ifndef __ASSEMBLY__ + +/* Address 0x400 to 0x1000 ualias points to cache error eframe + misc + * CACHE_ERR_SP_PTR could either contain an address to the stack, or + * the stack could start at CACHE_ERR_SP_PTR + */ +#if defined(HUB_ERR_STS_WAR) +#define CACHE_ERR_EFRAME 0x480 +#else /* HUB_ERR_STS_WAR */ +#define CACHE_ERR_EFRAME 0x400 +#endif /* HUB_ERR_STS_WAR */ + +#define CACHE_ERR_ECCFRAME (CACHE_ERR_EFRAME + EF_SIZE) +#define CACHE_ERR_SP_PTR (0x1000 - 32) /* why -32? TBD */ +#define CACHE_ERR_IBASE_PTR (0x1000 - 40) +#define CACHE_ERR_SP (CACHE_ERR_SP_PTR - 16) +#define CACHE_ERR_AREA_SIZE (ARCS_SPB_OFFSET - CACHE_ERR_EFRAME) + +#endif /* !__ASSEMBLY__ */ + +#define _ARCSPROM + +#if defined(HUB_ERR_STS_WAR) + +#define ERR_STS_WAR_REGISTER IIO_IIBUSERR +#define ERR_STS_WAR_ADDR LOCAL_HUB_ADDR(IIO_IIBUSERR) +#define ERR_STS_WAR_PHYSADDR TO_PHYS((__psunsigned_t)ERR_STS_WAR_ADDR) + /* Used to match addr in error reg. */ +#define OLD_ERR_STS_WAR_OFFSET ((MD_MEM_BANKS * MD_BANK_SIZE) - 0x100) + +#endif /* HUB_ERR_STS_WAR */ + +#endif /* _ASM_SN_SN0_ADDRS_H */ diff --git a/arch/mips/include/asm/sn/sn0/arch.h b/arch/mips/include/asm/sn/sn0/arch.h new file mode 100644 index 000000000000..f734f2007f24 --- /dev/null +++ b/arch/mips/include/asm/sn/sn0/arch.h @@ -0,0 +1,72 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * SGI IP27 specific setup. + * + * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc. + * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_SN_SN0_ARCH_H +#define _ASM_SN_SN0_ARCH_H + + +#ifndef SN0XXL /* 128 cpu SMP max */ +/* + * This is the maximum number of nodes that can be part of a kernel. + * Effectively, it's the maximum number of compact node ids (cnodeid_t). + */ +#define MAX_COMPACT_NODES 64 + +/* + * MAXCPUS refers to the maximum number of CPUs in a single kernel. + * This is not necessarily the same as MAXNODES * CPUS_PER_NODE + */ +#define MAXCPUS 128 + +#else /* SN0XXL system */ + +#define MAX_COMPACT_NODES 128 +#define MAXCPUS 256 + +#endif /* SN0XXL */ + +/* + * This is the maximum number of NASIDS that can be present in a system. + * (Highest NASID plus one.) + */ +#define MAX_NASIDS 256 + +/* + * MAX_REGIONS refers to the maximum number of hardware partitioned regions. + */ +#define MAX_REGIONS 64 +#define MAX_NONPREMIUM_REGIONS 16 +#define MAX_PREMIUM_REGIONS MAX_REGIONS + +/* + * MAX_PARITIONS refers to the maximum number of logically defined + * partitions the system can support. + */ +#define MAX_PARTITIONS MAX_REGIONS + +#define NASID_MASK_BYTES ((MAX_NASIDS + 7) / 8) + +/* + * Slot constants for SN0 + */ +#ifdef CONFIG_SGI_SN_N_MODE +#define MAX_MEM_SLOTS 16 /* max slots per node */ +#else /* !CONFIG_SGI_SN_N_MODE, assume CONFIG_SGI_SN_M_MODE */ +#define MAX_MEM_SLOTS 32 /* max slots per node */ +#endif /* CONFIG_SGI_SN_M_MODE */ + +#define SLOT_SHIFT (27) +#define SLOT_MIN_MEM_SIZE (32*1024*1024) + +#define CPUS_PER_NODE 2 /* CPUs on a single hub */ +#define CPUS_PER_NODE_SHFT 1 /* Bits to shift in the node number */ +#define CPUS_PER_SUBNODE 2 /* CPUs on a single hub PI */ + +#endif /* _ASM_SN_SN0_ARCH_H */ diff --git a/arch/mips/include/asm/sn/sn0/hub.h b/arch/mips/include/asm/sn/sn0/hub.h new file mode 100644 index 000000000000..3e228f8e7969 --- /dev/null +++ b/arch/mips/include/asm/sn/sn0/hub.h @@ -0,0 +1,40 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_SN_SN0_HUB_H +#define _ASM_SN_SN0_HUB_H + +/* The secret password; used to release protection */ +#define HUB_PASSWORD 0x53474972756c6573ull + +#define CHIPID_HUB 0 +#define CHIPID_ROUTER 1 + +#define HUB_REV_1_0 1 +#define HUB_REV_2_0 2 +#define HUB_REV_2_1 3 +#define HUB_REV_2_2 4 +#define HUB_REV_2_3 5 +#define HUB_REV_2_4 6 + +#define MAX_HUB_PATH 80 + +#include <asm/sn/sn0/addrs.h> +#include <asm/sn/sn0/hubpi.h> +#include <asm/sn/sn0/hubmd.h> +#include <asm/sn/sn0/hubio.h> +#include <asm/sn/sn0/hubni.h> +//#include <asm/sn/sn0/hubcore.h> + +/* Translation of uncached attributes */ +#define UATTR_HSPEC 0 +#define UATTR_IO 1 +#define UATTR_MSPEC 2 +#define UATTR_UNCAC 3 + +#endif /* _ASM_SN_SN0_HUB_H */ diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h new file mode 100644 index 000000000000..d0c29d4de084 --- /dev/null +++ b/arch/mips/include/asm/sn/sn0/hubio.h @@ -0,0 +1,972 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX <sys/SN/SN0/hubio.h>, Revision 1.80. + * + * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_SGI_SN_SN0_HUBIO_H +#define _ASM_SGI_SN_SN0_HUBIO_H + +/* + * Hub I/O interface registers + * + * All registers in this file are subject to change until Hub chip tapeout. + * In general, the longer software name should be used when available. + */ + +/* + * Slightly friendlier names for some common registers. + * The hardware definitions follow. + */ +#define IIO_WIDGET IIO_WID /* Widget identification */ +#define IIO_WIDGET_STAT IIO_WSTAT /* Widget status register */ +#define IIO_WIDGET_CTRL IIO_WCR /* Widget control register */ +#define IIO_WIDGET_TOUT IIO_WRTO /* Widget request timeout */ +#define IIO_WIDGET_FLUSH IIO_WTFR /* Widget target flush */ +#define IIO_PROTECT IIO_ILAPR /* IO interface protection */ +#define IIO_PROTECT_OVRRD IIO_ILAPO /* IO protect override */ +#define IIO_OUTWIDGET_ACCESS IIO_IOWA /* Outbound widget access */ +#define IIO_INWIDGET_ACCESS IIO_IIWA /* Inbound widget access */ +#define IIO_INDEV_ERR_MASK IIO_IIDEM /* Inbound device error mask */ +#define IIO_LLP_CSR IIO_ILCSR /* LLP control and status */ +#define IIO_LLP_LOG IIO_ILLR /* LLP log */ +#define IIO_XTALKCC_TOUT IIO_IXCC /* Xtalk credit count timeout*/ +#define IIO_XTALKTT_TOUT IIO_IXTT /* Xtalk tail timeout */ +#define IIO_IO_ERR_CLR IIO_IECLR /* IO error clear */ +#define IIO_BTE_CRB_CNT IIO_IBCN /* IO BTE CRB count */ + +#define IIO_LLP_CSR_IS_UP 0x00002000 +#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000 +#define IIO_LLP_CSR_LLP_STAT_SHFT 12 + +/* key to IIO_PROTECT_OVRRD */ +#define IIO_PROTECT_OVRRD_KEY 0x53474972756c6573ull /* "SGIrules" */ + +/* BTE register names */ +#define IIO_BTE_STAT_0 IIO_IBLS_0 /* Also BTE length/status 0 */ +#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */ +#define IIO_BTE_DEST_0 IIO_IBDA_0 /* Also BTE dest. address 0 */ +#define IIO_BTE_CTRL_0 IIO_IBCT_0 /* Also BTE control/terminate 0 */ +#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */ +#define IIO_BTE_INT_0 IIO_IBIA_0 /* Also BTE interrupt 0 */ +#define IIO_BTE_OFF_0 0 /* Base offset from BTE 0 regs. */ +#define IIO_BTE_OFF_1 IIO_IBLS_1 - IIO_IBLS_0 /* Offset from base to BTE 1 */ + +/* BTE register offsets from base */ +#define BTEOFF_STAT 0 +#define BTEOFF_SRC (IIO_BTE_SRC_0 - IIO_BTE_STAT_0) +#define BTEOFF_DEST (IIO_BTE_DEST_0 - IIO_BTE_STAT_0) +#define BTEOFF_CTRL (IIO_BTE_CTRL_0 - IIO_BTE_STAT_0) +#define BTEOFF_NOTIFY (IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0) +#define BTEOFF_INT (IIO_BTE_INT_0 - IIO_BTE_STAT_0) + + +/* + * The following definitions use the names defined in the IO interface + * document for ease of reference. When possible, software should + * generally use the longer but clearer names defined above. + */ + +#define IIO_BASE 0x400000 +#define IIO_BASE_BTE0 0x410000 +#define IIO_BASE_BTE1 0x420000 +#define IIO_BASE_PERF 0x430000 +#define IIO_PERF_CNT 0x430008 + +#define IO_PERF_SETS 32 + +#define IIO_WID 0x400000 /* Widget identification */ +#define IIO_WSTAT 0x400008 /* Widget status */ +#define IIO_WCR 0x400020 /* Widget control */ + +#define IIO_WSTAT_ECRAZY (1ULL << 32) /* Hub gone crazy */ +#define IIO_WSTAT_TXRETRY (1ULL << 9) /* Hub Tx Retry timeout */ +#define IIO_WSTAT_TXRETRY_MASK (0x7F) +#define IIO_WSTAT_TXRETRY_SHFT (16) +#define IIO_WSTAT_TXRETRY_CNT(w) (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \ + IIO_WSTAT_TXRETRY_MASK) + +#define IIO_ILAPR 0x400100 /* Local Access Protection */ +#define IIO_ILAPO 0x400108 /* Protection override */ +#define IIO_IOWA 0x400110 /* outbound widget access */ +#define IIO_IIWA 0x400118 /* inbound widget access */ +#define IIO_IIDEM 0x400120 /* Inbound Device Error Mask */ +#define IIO_ILCSR 0x400128 /* LLP control and status */ +#define IIO_ILLR 0x400130 /* LLP Log */ +#define IIO_IIDSR 0x400138 /* Interrupt destination */ + +#define IIO_IIBUSERR 0x1400208 /* Reads here cause a bus error. */ + +/* IO Interrupt Destination Register */ +#define IIO_IIDSR_SENT_SHIFT 28 +#define IIO_IIDSR_SENT_MASK 0x10000000 +#define IIO_IIDSR_ENB_SHIFT 24 +#define IIO_IIDSR_ENB_MASK 0x01000000 +#define IIO_IIDSR_NODE_SHIFT 8 +#define IIO_IIDSR_NODE_MASK 0x0000ff00 +#define IIO_IIDSR_LVL_SHIFT 0 +#define IIO_IIDSR_LVL_MASK 0x0000003f + + +/* GFX Flow Control Node/Widget Register */ +#define IIO_IGFX_0 0x400140 /* gfx node/widget register 0 */ +#define IIO_IGFX_1 0x400148 /* gfx node/widget register 1 */ +#define IIO_IGFX_W_NUM_BITS 4 /* size of widget num field */ +#define IIO_IGFX_W_NUM_MASK ((1<<IIO_IGFX_W_NUM_BITS)-1) +#define IIO_IGFX_W_NUM_SHIFT 0 +#define IIO_IGFX_N_NUM_BITS 9 /* size of node num field */ +#define IIO_IGFX_N_NUM_MASK ((1<<IIO_IGFX_N_NUM_BITS)-1) +#define IIO_IGFX_N_NUM_SHIFT 4 +#define IIO_IGFX_P_NUM_BITS 1 /* size of processor num field */ +#define IIO_IGFX_P_NUM_MASK ((1<<IIO_IGFX_P_NUM_BITS)-1) +#define IIO_IGFX_P_NUM_SHIFT 16 +#define IIO_IGFX_VLD_BITS 1 /* size of valid field */ +#define IIO_IGFX_VLD_MASK ((1<<IIO_IGFX_VLD_BITS)-1) +#define IIO_IGFX_VLD_SHIFT 20 +#define IIO_IGFX_INIT(widget, node, cpu, valid) (\ + (((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) | \ + (((node) & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) | \ + (((cpu) & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT) | \ + (((valid) & IIO_IGFX_VLD_MASK) << IIO_IGFX_VLD_SHIFT) ) + +/* Scratch registers (not all bits available) */ +#define IIO_SCRATCH_REG0 0x400150 +#define IIO_SCRATCH_REG1 0x400158 +#define IIO_SCRATCH_MASK 0x0000000f00f11fff + +#define IIO_SCRATCH_BIT0_0 0x0000000800000000 +#define IIO_SCRATCH_BIT0_1 0x0000000400000000 +#define IIO_SCRATCH_BIT0_2 0x0000000200000000 +#define IIO_SCRATCH_BIT0_3 0x0000000100000000 +#define IIO_SCRATCH_BIT0_4 0x0000000000800000 +#define IIO_SCRATCH_BIT0_5 0x0000000000400000 +#define IIO_SCRATCH_BIT0_6 0x0000000000200000 +#define IIO_SCRATCH_BIT0_7 0x0000000000100000 +#define IIO_SCRATCH_BIT0_8 0x0000000000010000 +#define IIO_SCRATCH_BIT0_9 0x0000000000001000 +#define IIO_SCRATCH_BIT0_R 0x0000000000000fff + +/* IO Translation Table Entries */ +#define IIO_NUM_ITTES 7 /* ITTEs numbered 0..6 */ + /* Hw manuals number them 1..7! */ + +/* + * As a permanent workaround for a bug in the PI side of the hub, we've + * redefined big window 7 as small window 0. + */ +#define HUB_NUM_BIG_WINDOW IIO_NUM_ITTES - 1 + +/* + * Use the top big window as a surrogate for the first small window + */ +#define SWIN0_BIGWIN HUB_NUM_BIG_WINDOW + +#define ILCSR_WARM_RESET 0x100 +/* + * The IO LLP control status register and widget control register + */ +#ifndef __ASSEMBLY__ + +typedef union hubii_wid_u { + u64 wid_reg_value; + struct { + u64 wid_rsvd: 32, /* unused */ + wid_rev_num: 4, /* revision number */ + wid_part_num: 16, /* the widget type: hub=c101 */ + wid_mfg_num: 11, /* Manufacturer id (IBM) */ + wid_rsvd1: 1; /* Reserved */ + } wid_fields_s; +} hubii_wid_t; + + +typedef union hubii_wcr_u { + u64 wcr_reg_value; + struct { + u64 wcr_rsvd: 41, /* unused */ + wcr_e_thresh: 5, /* elasticity threshold */ + wcr_dir_con: 1, /* widget direct connect */ + wcr_f_bad_pkt: 1, /* Force bad llp pkt enable */ + wcr_xbar_crd: 3, /* LLP crossbar credit */ + wcr_rsvd1: 8, /* Reserved */ + wcr_tag_mode: 1, /* Tag mode */ + wcr_widget_id: 4; /* LLP crossbar credit */ + } wcr_fields_s; +} hubii_wcr_t; + +#define iwcr_dir_con wcr_fields_s.wcr_dir_con + +typedef union hubii_wstat_u { + u64 reg_value; + struct { + u64 rsvd1: 31, + crazy: 1, /* Crazy bit */ + rsvd2: 8, + llp_tx_cnt: 8, /* LLP Xmit retry counter */ + rsvd3: 6, + tx_max_rtry: 1, /* LLP Retry Timeout Signal */ + rsvd4: 2, + xt_tail_to: 1, /* Xtalk Tail Timeout */ + xt_crd_to: 1, /* Xtalk Credit Timeout */ + pending: 4; /* Pending Requests */ + } wstat_fields_s; +} hubii_wstat_t; + + +typedef union hubii_ilcsr_u { + u64 icsr_reg_value; + struct { + u64 icsr_rsvd: 22, /* unused */ + icsr_max_burst: 10, /* max burst */ + icsr_rsvd4: 6, /* reserved */ + icsr_max_retry: 10, /* max retry */ + icsr_rsvd3: 2, /* reserved */ + icsr_lnk_stat: 2, /* link status */ + icsr_bm8: 1, /* Bit mode 8 */ + icsr_llp_en: 1, /* LLP enable bit */ + icsr_rsvd2: 1, /* reserver */ + icsr_wrm_reset: 1, /* Warm reset bit */ + icsr_rsvd1: 2, /* Data ready offset */ + icsr_null_to: 6; /* Null timeout */ + + } icsr_fields_s; +} hubii_ilcsr_t; + + +typedef union hubii_iowa_u { + u64 iowa_reg_value; + struct { + u64 iowa_rsvd: 48, /* unused */ + iowa_wxoac: 8, /* xtalk widget access bits */ + iowa_rsvd1: 7, /* xtalk widget access bits */ + iowa_w0oac: 1; /* xtalk widget access bits */ + } iowa_fields_s; +} hubii_iowa_t; + +typedef union hubii_iiwa_u { + u64 iiwa_reg_value; + struct { + u64 iiwa_rsvd: 48, /* unused */ + iiwa_wxiac: 8, /* hub wid access bits */ + iiwa_rsvd1: 7, /* reserved */ + iiwa_w0iac: 1; /* hub wid0 access */ + } iiwa_fields_s; +} hubii_iiwa_t; + +typedef union hubii_illr_u { + u64 illr_reg_value; + struct { + u64 illr_rsvd: 32, /* unused */ + illr_cb_cnt: 16, /* checkbit error count */ + illr_sn_cnt: 16; /* sequence number count */ + } illr_fields_s; +} hubii_illr_t; + +/* The structures below are defined to extract and modify the ii +performance registers */ + +/* io_perf_sel allows the caller to specify what tests will be + performed */ +typedef union io_perf_sel { + u64 perf_sel_reg; + struct { + u64 perf_rsvd : 48, + perf_icct : 8, + perf_ippr1 : 4, + perf_ippr0 : 4; + } perf_sel_bits; +} io_perf_sel_t; + +/* io_perf_cnt is to extract the count from the hub registers. Due to + hardware problems there is only one counter, not two. */ + +typedef union io_perf_cnt { + u64 perf_cnt; + struct { + u64 perf_rsvd1 : 32, + perf_rsvd2 : 12, + perf_cnt : 20; + } perf_cnt_bits; +} io_perf_cnt_t; + +#endif /* !__ASSEMBLY__ */ + + +#define LNK_STAT_WORKING 0x2 + +#define IIO_LLP_CB_MAX 0xffff +#define IIO_LLP_SN_MAX 0xffff + +/* IO PRB Entries */ +#define IIO_NUM_IPRBS (9) +#define IIO_IOPRB_0 0x400198 /* PRB entry 0 */ +#define IIO_IOPRB_8 0x4001a0 /* PRB entry 8 */ +#define IIO_IOPRB_9 0x4001a8 /* PRB entry 9 */ +#define IIO_IOPRB_A 0x4001b0 /* PRB entry a */ +#define IIO_IOPRB_B 0x4001b8 /* PRB entry b */ +#define IIO_IOPRB_C 0x4001c0 /* PRB entry c */ +#define IIO_IOPRB_D 0x4001c8 /* PRB entry d */ +#define IIO_IOPRB_E 0x4001d0 /* PRB entry e */ +#define IIO_IOPRB_F 0x4001d8 /* PRB entry f */ + + +#define IIO_IXCC 0x4001e0 /* Crosstalk credit count timeout */ +#define IIO_IXTCC IIO_IXCC +#define IIO_IMEM 0x4001e8 /* Miscellaneous Enable Mask */ +#define IIO_IXTT 0x4001f0 /* Crosstalk tail timeout */ +#define IIO_IECLR 0x4001f8 /* IO error clear */ +#define IIO_IBCN 0x400200 /* IO BTE CRB count */ + +/* + * IIO_IMEM Register fields. + */ +#define IIO_IMEM_W0ESD 0x1 /* Widget 0 shut down due to error */ +#define IIO_IMEM_B0ESD (1 << 4) /* BTE 0 shut down due to error */ +#define IIO_IMEM_B1ESD (1 << 8) /* BTE 1 Shut down due to error */ + +/* PIO Read address Table Entries */ +#define IIO_IPCA 0x400300 /* PRB Counter adjust */ +#define IIO_NUM_PRTES 8 /* Total number of PRB table entries */ +#define IIO_PRTE_0 0x400308 /* PIO Read address table entry 0 */ +#define IIO_PRTE(_x) (IIO_PRTE_0 + (8 * (_x))) +#define IIO_WIDPRTE(x) IIO_PRTE(((x) - 8)) /* widget ID to its PRTE num */ +#define IIO_IPDR 0x400388 /* PIO table entry deallocation */ +#define IIO_ICDR 0x400390 /* CRB Entry Deallocation */ +#define IIO_IFDR 0x400398 /* IOQ FIFO Depth */ +#define IIO_IIAP 0x4003a0 /* IIQ Arbitration Parameters */ +#define IIO_IMMR IIO_IIAP +#define IIO_ICMR 0x4003a8 /* CRB Management Register */ +#define IIO_ICCR 0x4003b0 /* CRB Control Register */ +#define IIO_ICTO 0x4003b8 /* CRB Time Out Register */ +#define IIO_ICTP 0x4003c0 /* CRB Time Out Prescalar */ + + +/* + * ICMR register fields + */ +#define IIO_ICMR_PC_VLD_SHFT 36 +#define IIO_ICMR_PC_VLD_MASK (0x7fffUL << IIO_ICMR_PC_VLD_SHFT) + +#define IIO_ICMR_CRB_VLD_SHFT 20 +#define IIO_ICMR_CRB_VLD_MASK (0x7fffUL << IIO_ICMR_CRB_VLD_SHFT) + +#define IIO_ICMR_FC_CNT_SHFT 16 +#define IIO_ICMR_FC_CNT_MASK (0xf << IIO_ICMR_FC_CNT_SHFT) + +#define IIO_ICMR_C_CNT_SHFT 4 +#define IIO_ICMR_C_CNT_MASK (0xf << IIO_ICMR_C_CNT_SHFT) + +#define IIO_ICMR_P_CNT_SHFT 0 +#define IIO_ICMR_P_CNT_MASK (0xf << IIO_ICMR_P_CNT_SHFT) + +#define IIO_ICMR_PRECISE (1UL << 52) +#define IIO_ICMR_CLR_RPPD (1UL << 13) +#define IIO_ICMR_CLR_RQPD (1UL << 12) + +/* + * IIO PIO Deallocation register field masks : (IIO_IPDR) + */ +#define IIO_IPDR_PND (1 << 4) + +/* + * IIO CRB deallocation register field masks: (IIO_ICDR) + */ +#define IIO_ICDR_PND (1 << 4) + +/* + * IIO CRB control register Fields: IIO_ICCR + */ +#define IIO_ICCR_PENDING (0x10000) +#define IIO_ICCR_CMD_MASK (0xFF) +#define IIO_ICCR_CMD_SHFT (7) +#define IIO_ICCR_CMD_NOP (0x0) /* No Op */ +#define IIO_ICCR_CMD_WAKE (0x100) /* Reactivate CRB entry and process */ +#define IIO_ICCR_CMD_TIMEOUT (0x200) /* Make CRB timeout & mark invalid */ +#define IIO_ICCR_CMD_EJECT (0x400) /* Contents of entry written to memory + * via a WB + */ +#define IIO_ICCR_CMD_FLUSH (0x800) + +/* + * CRB manipulation macros + * The CRB macros are slightly complicated, since there are up to + * four registers associated with each CRB entry. + */ +#define IIO_NUM_CRBS 15 /* Number of CRBs */ +#define IIO_NUM_NORMAL_CRBS 12 /* Number of regular CRB entries */ +#define IIO_NUM_PC_CRBS 4 /* Number of partial cache CRBs */ +#define IIO_ICRB_OFFSET 8 +#define IIO_ICRB_0 0x400400 +/* XXX - This is now tuneable: + #define IIO_FIRST_PC_ENTRY 12 + */ + +#define IIO_ICRB_A(_x) (IIO_ICRB_0 + (4 * IIO_ICRB_OFFSET * (_x))) +#define IIO_ICRB_B(_x) (IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET) +#define IIO_ICRB_C(_x) (IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET) +#define IIO_ICRB_D(_x) (IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET) + +/* XXX - IBUE register coming for Hub 2 */ + +/* + * + * CRB Register description. + * + * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING + * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING + * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING + * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING + * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING + * + * Many of the fields in CRB are status bits used by hardware + * for implementation of the protocol. It's very dangerous to + * mess around with the CRB registers. + * + * It's OK to read the CRB registers and try to make sense out of the + * fields in CRB. + * + * Updating CRB requires all activities in Hub IIO to be quiesced. + * otherwise, a write to CRB could corrupt other CRB entries. + * CRBs are here only as a back door peek to hub IIO's status. + * Quiescing implies no dmas no PIOs + * either directly from the cpu or from sn0net. + * this is not something that can be done easily. So, AVOID updating + * CRBs. + */ + +/* + * Fields in CRB Register A + */ +#ifndef __ASSEMBLY__ +typedef union icrba_u { + u64 reg_value; + struct { + u64 resvd: 6, + stall_bte0: 1, /* Stall BTE 0 */ + stall_bte1: 1, /* Stall BTE 1 */ + error: 1, /* CRB has an error */ + ecode: 3, /* Error Code */ + lnetuce: 1, /* SN0net Uncorrectable error */ + mark: 1, /* CRB Has been marked */ + xerr: 1, /* Error bit set in xtalk header */ + sidn: 4, /* SIDN field from xtalk */ + tnum: 5, /* TNUM field in xtalk */ + addr: 38, /* Address of request */ + valid: 1, /* Valid status */ + iow: 1; /* IO Write operation */ + } icrba_fields_s; +} icrba_t; + +/* This is an alternate typedef for the HUB1 CRB A in order to allow + runtime selection of the format based on the REV_ID field of the + NI_STATUS_REV_ID register. */ +typedef union h1_icrba_u { + u64 reg_value; + + struct { + u64 resvd: 6, + unused: 1, /* Unused but RW!! */ + error: 1, /* CRB has an error */ + ecode: 4, /* Error Code */ + lnetuce: 1, /* SN0net Uncorrectable error */ + mark: 1, /* CRB Has been marked */ + xerr: 1, /* Error bit set in xtalk header */ + sidn: 4, /* SIDN field from xtalk */ + tnum: 5, /* TNUM field in xtalk */ + addr: 38, /* Address of request */ + valid: 1, /* Valid status */ + iow: 1; /* IO Write operation */ + } h1_icrba_fields_s; +} h1_icrba_t; + +/* XXX - Is this still right? Check the spec. */ +#define ICRBN_A_CERR_SHFT 54 +#define ICRBN_A_ERR_MASK 0x3ff + +#endif /* !__ASSEMBLY__ */ + +#define IIO_ICRB_ADDR_SHFT 2 /* Shift to get proper address */ + +/* + * values for "ecode" field + */ +#define IIO_ICRB_ECODE_DERR 0 /* Directory error due to IIO access */ +#define IIO_ICRB_ECODE_PERR 1 /* Poison error on IO access */ +#define IIO_ICRB_ECODE_WERR 2 /* Write error by IIO access + * e.g. WINV to a Read only line. + */ +#define IIO_ICRB_ECODE_AERR 3 /* Access error caused by IIO access */ +#define IIO_ICRB_ECODE_PWERR 4 /* Error on partial write */ +#define IIO_ICRB_ECODE_PRERR 5 /* Error on partial read */ +#define IIO_ICRB_ECODE_TOUT 6 /* CRB timeout before deallocating */ +#define IIO_ICRB_ECODE_XTERR 7 /* Incoming xtalk pkt had error bit */ + + + +/* + * Fields in CRB Register B + */ +#ifndef __ASSEMBLY__ +typedef union icrbb_u { + u64 reg_value; + struct { + u64 rsvd1: 5, + btenum: 1, /* BTE to which entry belongs to */ + cohtrans: 1, /* Coherent transaction */ + xtsize: 2, /* Xtalk operation size + * 0: Double Word + * 1: 32 Bytes. + * 2: 128 Bytes, + * 3: Reserved. + */ + srcnode: 9, /* Source Node ID */ + srcinit: 2, /* Source Initiator: + * See below for field values. + */ + useold: 1, /* Use OLD command for processing */ + imsgtype: 2, /* Incoming message type + * see below for field values + */ + imsg: 8, /* Incoming message */ + initator: 3, /* Initiator of original request + * See below for field values. + */ + reqtype: 5, /* Identifies type of request + * See below for field values. + */ + rsvd2: 7, + ackcnt: 11, /* Invalidate ack count */ + resp: 1, /* data response given to processor */ + ack: 1, /* indicates data ack received */ + hold: 1, /* entry is gathering inval acks */ + wb_pend:1, /* waiting for writeback to complete */ + intvn: 1, /* Intervention */ + stall_ib: 1, /* Stall Ibuf (from crosstalk) */ + stall_intr: 1; /* Stall internal interrupts */ + } icrbb_field_s; +} icrbb_t; + +/* This is an alternate typedef for the HUB1 CRB B in order to allow + runtime selection of the format based on the REV_ID field of the + NI_STATUS_REV_ID register. */ +typedef union h1_icrbb_u { + u64 reg_value; + struct { + u64 rsvd1: 5, + btenum: 1, /* BTE to which entry belongs to */ + cohtrans: 1, /* Coherent transaction */ + xtsize: 2, /* Xtalk operation size + * 0: Double Word + * 1: 32 Bytes. + * 2: 128 Bytes, + * 3: Reserved. + */ + srcnode: 9, /* Source Node ID */ + srcinit: 2, /* Source Initiator: + * See below for field values. + */ + useold: 1, /* Use OLD command for processing */ + imsgtype: 2, /* Incoming message type + * see below for field values + */ + imsg: 8, /* Incoming message */ + initator: 3, /* Initiator of original request + * See below for field values. + */ + rsvd2: 1, + pcache: 1, /* entry belongs to partial cache */ + reqtype: 5, /* Identifies type of request + * See below for field values. + */ + stl_ib: 1, /* stall Ibus coming from xtalk */ + stl_intr: 1, /* Stall internal interrupts */ + stl_bte0: 1, /* Stall BTE 0 */ + stl_bte1: 1, /* Stall BTE 1 */ + intrvn: 1, /* Req was target of intervention */ + ackcnt: 11, /* Invalidate ack count */ + resp: 1, /* data response given to processor */ + ack: 1, /* indicates data ack received */ + hold: 1, /* entry is gathering inval acks */ + wb_pend:1, /* waiting for writeback to complete */ + sleep: 1, /* xtalk req sleeping till IO-sync */ + pnd_reply: 1, /* replies not issed due to IOQ full */ + pnd_req: 1; /* reqs not issued due to IOQ full */ + } h1_icrbb_field_s; +} h1_icrbb_t; + + +#define b_imsgtype icrbb_field_s.imsgtype +#define b_btenum icrbb_field_s.btenum +#define b_cohtrans icrbb_field_s.cohtrans +#define b_xtsize icrbb_field_s.xtsize +#define b_srcnode icrbb_field_s.srcnode +#define b_srcinit icrbb_field_s.srcinit +#define b_imsgtype icrbb_field_s.imsgtype +#define b_imsg icrbb_field_s.imsg +#define b_initiator icrbb_field_s.initiator + +#endif /* !__ASSEMBLY__ */ + +/* + * values for field xtsize + */ +#define IIO_ICRB_XTSIZE_DW 0 /* Xtalk operation size is 8 bytes */ +#define IIO_ICRB_XTSIZE_32 1 /* Xtalk operation size is 32 bytes */ +#define IIO_ICRB_XTSIZE_128 2 /* Xtalk operation size is 128 bytes */ + +/* + * values for field srcinit + */ +#define IIO_ICRB_PROC0 0 /* Source of request is Proc 0 */ +#define IIO_ICRB_PROC1 1 /* Source of request is Proc 1 */ +#define IIO_ICRB_GB_REQ 2 /* Source is Guranteed BW request */ +#define IIO_ICRB_IO_REQ 3 /* Source is Normal IO request */ + +/* + * Values for field imsgtype + */ +#define IIO_ICRB_IMSGT_XTALK 0 /* Incoming Meessage from Xtalk */ +#define IIO_ICRB_IMSGT_BTE 1 /* Incoming message from BTE */ +#define IIO_ICRB_IMSGT_SN0NET 2 /* Incoming message from SN0 net */ +#define IIO_ICRB_IMSGT_CRB 3 /* Incoming message from CRB ??? */ + +/* + * values for field initiator. + */ +#define IIO_ICRB_INIT_XTALK 0 /* Message originated in xtalk */ +#define IIO_ICRB_INIT_BTE0 0x1 /* Message originated in BTE 0 */ +#define IIO_ICRB_INIT_SN0NET 0x2 /* Message originated in SN0net */ +#define IIO_ICRB_INIT_CRB 0x3 /* Message originated in CRB ? */ +#define IIO_ICRB_INIT_BTE1 0x5 /* MEssage originated in BTE 1 */ + +/* + * Values for field reqtype. + */ +/* XXX - Need to fix this for Hub 2 */ +#define IIO_ICRB_REQ_DWRD 0 /* Request type double word */ +#define IIO_ICRB_REQ_QCLRD 1 /* Request is Qrtr Caceh line Rd */ +#define IIO_ICRB_REQ_BLKRD 2 /* Request is block read */ +#define IIO_ICRB_REQ_RSHU 6 /* Request is BTE block read */ +#define IIO_ICRB_REQ_REXU 7 /* request is BTE Excl Read */ +#define IIO_ICRB_REQ_RDEX 8 /* Request is Read Exclusive */ +#define IIO_ICRB_REQ_WINC 9 /* Request is Write Invalidate */ +#define IIO_ICRB_REQ_BWINV 10 /* Request is BTE Winv */ +#define IIO_ICRB_REQ_PIORD 11 /* Request is PIO read */ +#define IIO_ICRB_REQ_PIOWR 12 /* Request is PIO Write */ +#define IIO_ICRB_REQ_PRDM 13 /* Request is Fetch&Op */ +#define IIO_ICRB_REQ_PWRM 14 /* Request is Store &Op */ +#define IIO_ICRB_REQ_PTPWR 15 /* Request is Peer to peer */ +#define IIO_ICRB_REQ_WB 16 /* Request is Write back */ +#define IIO_ICRB_REQ_DEX 17 /* Retained DEX Cache line */ + +/* + * Fields in CRB Register C + */ + +#ifndef __ASSEMBLY__ + +typedef union icrbc_s { + u64 reg_value; + struct { + u64 rsvd: 6, + sleep: 1, + pricnt: 4, /* Priority count sent with Read req */ + pripsc: 4, /* Priority Pre scalar */ + bteop: 1, /* BTE Operation */ + push_be: 34, /* Push address Byte enable + * Holds push addr, if CRB is for BTE + * If CRB belongs to Partial cache, + * this contains byte enables bits + * ([47:46] = 0) + */ + suppl: 11, /* Supplemental field */ + barrop: 1, /* Barrier Op bit set in xtalk req */ + doresp: 1, /* Xtalk req needs a response */ + gbr: 1; /* GBR bit set in xtalk packet */ + } icrbc_field_s; +} icrbc_t; + +#define c_pricnt icrbc_field_s.pricnt +#define c_pripsc icrbc_field_s.pripsc +#define c_bteop icrbc_field_s.bteop +#define c_bteaddr icrbc_field_s.push_be /* push_be field has 2 names */ +#define c_benable icrbc_field_s.push_be /* push_be field has 2 names */ +#define c_suppl icrbc_field_s.suppl +#define c_barrop icrbc_field_s.barrop +#define c_doresp icrbc_field_s.doresp +#define c_gbr icrbc_field_s.gbr +#endif /* !__ASSEMBLY__ */ + +/* + * Fields in CRB Register D + */ + +#ifndef __ASSEMBLY__ +typedef union icrbd_s { + u64 reg_value; + struct { + u64 rsvd: 38, + toutvld: 1, /* Timeout in progress for this CRB */ + ctxtvld: 1, /* Context field below is valid */ + rsvd2: 1, + context: 15, /* Bit vector: + * Has a bit set for each CRB entry + * which needs to be deallocated + * before this CRB entry is processed. + * Set only for barrier operations. + */ + timeout: 8; /* Timeout Upper 8 bits */ + } icrbd_field_s; +} icrbd_t; + +#define icrbd_toutvld icrbd_field_s.toutvld +#define icrbd_ctxtvld icrbd_field_s.ctxtvld +#define icrbd_context icrbd_field_s.context + + +typedef union hubii_ifdr_u { + u64 hi_ifdr_value; + struct { + u64 ifdr_rsvd: 49, + ifdr_maxrp: 7, + ifdr_rsvd1: 1, + ifdr_maxrq: 7; + } hi_ifdr_fields; +} hubii_ifdr_t; + +#endif /* !__ASSEMBLY__ */ + +/* + * Hardware designed names for the BTE control registers. + */ +#define IIO_IBLS_0 0x410000 /* BTE length/status 0 */ +#define IIO_IBSA_0 0x410008 /* BTE source address 0 */ +#define IIO_IBDA_0 0x410010 /* BTE destination address 0 */ +#define IIO_IBCT_0 0x410018 /* BTE control/terminate 0 */ +#define IIO_IBNA_0 0x410020 /* BTE notification address 0 */ +#define IIO_IBNR_0 IIO_IBNA_0 +#define IIO_IBIA_0 0x410028 /* BTE interrupt address 0 */ + +#define IIO_IBLS_1 0x420000 /* BTE length/status 1 */ +#define IIO_IBSA_1 0x420008 /* BTE source address 1 */ +#define IIO_IBDA_1 0x420010 /* BTE destination address 1 */ +#define IIO_IBCT_1 0x420018 /* BTE control/terminate 1 */ +#define IIO_IBNA_1 0x420020 /* BTE notification address 1 */ +#define IIO_IBNR_1 IIO_IBNA_1 +#define IIO_IBIA_1 0x420028 /* BTE interrupt address 1 */ + +/* + * More miscellaneous registers + */ +#define IIO_IPCR 0x430000 /* Performance Control */ +#define IIO_IPPR 0x430008 /* Performance Profiling */ + +/* + * IO Error Clear register bit field definitions + */ +#define IECLR_BTE1 (1 << 18) /* clear bte error 1 ??? */ +#define IECLR_BTE0 (1 << 17) /* clear bte error 0 ??? */ +#define IECLR_CRAZY (1 << 16) /* clear crazy bit in wstat reg */ +#define IECLR_PRB_F (1 << 15) /* clear err bit in PRB_F reg */ +#define IECLR_PRB_E (1 << 14) /* clear err bit in PRB_E reg */ +#define IECLR_PRB_D (1 << 13) /* clear err bit in PRB_D reg */ +#define IECLR_PRB_C (1 << 12) /* clear err bit in PRB_C reg */ +#define IECLR_PRB_B (1 << 11) /* clear err bit in PRB_B reg */ +#define IECLR_PRB_A (1 << 10) /* clear err bit in PRB_A reg */ +#define IECLR_PRB_9 (1 << 9) /* clear err bit in PRB_9 reg */ +#define IECLR_PRB_8 (1 << 8) /* clear err bit in PRB_8 reg */ +#define IECLR_PRB_0 (1 << 0) /* clear err bit in PRB_0 reg */ + +/* + * IO PIO Read Table Entry format + */ + +#ifndef __ASSEMBLY__ + +typedef union iprte_a { + u64 entry; + struct { + u64 rsvd1 : 7, /* Reserved field */ + valid : 1, /* Maps to a timeout entry */ + rsvd2 : 1, + srcnode : 9, /* Node which did this PIO */ + initiator : 2, /* If T5A or T5B or IO */ + rsvd3 : 3, + addr : 38, /* Physical address of PIO */ + rsvd4 : 3; + } iprte_fields; +} iprte_a_t; + +#define iprte_valid iprte_fields.valid +#define iprte_timeout iprte_fields.timeout +#define iprte_srcnode iprte_fields.srcnode +#define iprte_init iprte_fields.initiator +#define iprte_addr iprte_fields.addr + +#endif /* !__ASSEMBLY__ */ + +#define IPRTE_ADDRSHFT 3 + +/* + * Hub IIO PRB Register format. + */ + +#ifndef __ASSEMBLY__ +/* + * Note: Fields bnakctr, anakctr, xtalkctrmode, ovflow fields are + * "Status" fields, and should only be used in case of clean up after errors. + */ + +typedef union iprb_u { + u64 reg_value; + struct { + u64 rsvd1: 15, + error: 1, /* Widget rcvd wr resp pkt w/ error */ + ovflow: 5, /* Over flow count. perf measurement */ + fire_and_forget: 1, /* Launch Write without response */ + mode: 2, /* Widget operation Mode */ + rsvd2: 2, + bnakctr: 14, + rsvd3: 2, + anakctr: 14, + xtalkctr: 8; + } iprb_fields_s; +} iprb_t; + +#define iprb_regval reg_value + +#define iprb_error iprb_fields_s.error +#define iprb_ovflow iprb_fields_s.ovflow +#define iprb_ff iprb_fields_s.fire_and_forget +#define iprb_mode iprb_fields_s.mode +#define iprb_bnakctr iprb_fields_s.bnakctr +#define iprb_anakctr iprb_fields_s.anakctr +#define iprb_xtalkctr iprb_fields_s.xtalkctr + +#endif /* !__ASSEMBLY__ */ + +/* + * values for mode field in iprb_t. + * For details of the meanings of NAK and Accept, refer the PIO flow + * document + */ +#define IPRB_MODE_NORMAL (0) +#define IPRB_MODE_COLLECT_A (1) /* PRB in collect A mode */ +#define IPRB_MODE_SERVICE_A (2) /* NAK B and Accept A */ +#define IPRB_MODE_SERVICE_B (3) /* NAK A and Accept B */ + +/* + * IO CRB entry C_A to E_A : Partial (cache) CRBS + */ +#ifndef __ASSEMBLY__ +typedef union icrbp_a { + u64 ip_reg; /* the entire register value */ + struct { + u64 error: 1, /* 63, error occurred */ + ln_uce: 1, /* 62: uncorrectable memory */ + ln_ae: 1, /* 61: protection violation */ + ln_werr:1, /* 60: write access error */ + ln_aerr:1, /* 59: sn0net: Address error */ + ln_perr:1, /* 58: sn0net: poison error */ + timeout:1, /* 57: CRB timed out */ + l_bdpkt:1, /* 56: truncated pkt on sn0net */ + c_bdpkt:1, /* 55: truncated pkt on xtalk */ + c_err: 1, /* 54: incoming xtalk req, err set*/ + rsvd1: 12, /* 53-42: reserved */ + valid: 1, /* 41: Valid status */ + sidn: 4, /* 40-37: SIDN field of xtalk rqst */ + tnum: 5, /* 36-32: TNUM of xtalk request */ + bo: 1, /* 31: barrier op set in xtalk rqst*/ + resprqd:1, /* 30: xtalk rqst requires response*/ + gbr: 1, /* 29: gbr bit set in xtalk rqst */ + size: 2, /* 28-27: size of xtalk request */ + excl: 4, /* 26-23: exclusive bit(s) */ + stall: 3, /* 22-20: stall (xtalk, bte 0/1) */ + intvn: 1, /* 19: rqst target of intervention*/ + resp: 1, /* 18: Data response given to t5 */ + ack: 1, /* 17: Data ack received. */ + hold: 1, /* 16: crb gathering invalidate acks*/ + wb: 1, /* 15: writeback pending. */ + ack_cnt:11, /* 14-04: counter of invalidate acks*/ + tscaler:4; /* 03-00: Timeout prescaler */ + } ip_fmt; +} icrbp_a_t; + +#endif /* !__ASSEMBLY__ */ + +/* + * A couple of defines to go with the above structure. + */ +#define ICRBP_A_CERR_SHFT 54 +#define ICRBP_A_ERR_MASK 0x3ff + +#ifndef __ASSEMBLY__ +typedef union hubii_idsr { + u64 iin_reg; + struct { + u64 rsvd1 : 35, + isent : 1, + rsvd2 : 3, + ienable: 1, + rsvd : 7, + node : 9, + rsvd4 : 1, + level : 7; + } iin_fmt; +} hubii_idsr_t; +#endif /* !__ASSEMBLY__ */ + +/* + * IO BTE Length/Status (IIO_IBLS) register bit field definitions + */ +#define IBLS_BUSY (0x1 << 20) +#define IBLS_ERROR_SHFT 16 +#define IBLS_ERROR (0x1 << IBLS_ERROR_SHFT) +#define IBLS_LENGTH_MASK 0xffff + +/* + * IO BTE Control/Terminate register (IBCT) register bit field definitions + */ +#define IBCT_POISON (0x1 << 8) +#define IBCT_NOTIFY (0x1 << 4) +#define IBCT_ZFIL_MODE (0x1 << 0) + +/* + * IO BTE Interrupt Address Register (IBIA) register bit field definitions + */ +#define IBIA_LEVEL_SHFT 16 +#define IBIA_LEVEL_MASK (0x7f << IBIA_LEVEL_SHFT) +#define IBIA_NODE_ID_SHFT 0 +#define IBIA_NODE_ID_MASK (0x1ff) + +/* + * Miscellaneous hub constants + */ + +/* Number of widgets supported by hub */ +#define HUB_NUM_WIDGET 9 +#define HUB_WIDGET_ID_MIN 0x8 +#define HUB_WIDGET_ID_MAX 0xf + +#define HUB_WIDGET_PART_NUM 0xc101 +#define MAX_HUBS_PER_XBOW 2 + +/* + * Get a hub's widget id from widget control register + */ +#define IIO_WCR_WID_GET(nasid) (REMOTE_HUB_L(nasid, III_WCR) & 0xf) +#define IIO_WST_ERROR_MASK (UINT64_CAST 1 << 32) /* Widget status error */ + +/* + * Number of credits Hub widget has while sending req/response to + * xbow. + * Value of 3 is required by Xbow 1.1 + * We may be able to increase this to 4 with Xbow 1.2. + */ +#define HUBII_XBOW_CREDIT 3 +#define HUBII_XBOW_REV2_CREDIT 4 + +#endif /* _ASM_SGI_SN_SN0_HUBIO_H */ diff --git a/arch/mips/include/asm/sn/sn0/hubmd.h b/arch/mips/include/asm/sn/sn0/hubmd.h new file mode 100644 index 000000000000..14c225d80664 --- /dev/null +++ b/arch/mips/include/asm/sn/sn0/hubmd.h @@ -0,0 +1,789 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX <sys/SN/SN0/hubmd.h>, revision 1.59. + * + * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_SN_SN0_HUBMD_H +#define _ASM_SN_SN0_HUBMD_H + + +/* + * Hub Memory/Directory interface registers + */ +#define CACHE_SLINE_SIZE 128 /* Secondary cache line size on SN0 */ + +#define MAX_REGIONS 64 + +/* Hardware page size and shift */ + +#define MD_PAGE_SIZE 4096 /* Page size in bytes */ +#define MD_PAGE_NUM_SHFT 12 /* Address to page number shift */ + +/* Register offsets from LOCAL_HUB or REMOTE_HUB */ + +#define MD_BASE 0x200000 +#define MD_BASE_PERF 0x210000 +#define MD_BASE_JUNK 0x220000 + +#define MD_IO_PROTECT 0x200000 /* MD and core register protection */ +#define MD_IO_PROT_OVRRD 0x200008 /* Clear my bit in MD_IO_PROTECT */ +#define MD_HSPEC_PROTECT 0x200010 /* BDDIR, LBOOT, RBOOT protection */ +#define MD_MEMORY_CONFIG 0x200018 /* Memory/Directory DIMM control */ +#define MD_REFRESH_CONTROL 0x200020 /* Memory/Directory refresh ctrl */ +#define MD_FANDOP_CAC_STAT 0x200028 /* Fetch-and-op cache status */ +#define MD_MIG_DIFF_THRESH 0x200030 /* Page migr. count diff thresh. */ +#define MD_MIG_VALUE_THRESH 0x200038 /* Page migr. count abs. thresh. */ +#define MD_MIG_CANDIDATE 0x200040 /* Latest page migration candidate */ +#define MD_MIG_CANDIDATE_CLR 0x200048 /* Clear page migration candidate */ +#define MD_DIR_ERROR 0x200050 /* Directory DIMM error */ +#define MD_DIR_ERROR_CLR 0x200058 /* Directory DIMM error clear */ +#define MD_PROTOCOL_ERROR 0x200060 /* Directory protocol error */ +#define MD_PROTOCOL_ERROR_CLR 0x200068 /* Directory protocol error clear */ +#define MD_MEM_ERROR 0x200070 /* Memory DIMM error */ +#define MD_MEM_ERROR_CLR 0x200078 /* Memory DIMM error clear */ +#define MD_MISC_ERROR 0x200080 /* Miscellaneous MD error */ +#define MD_MISC_ERROR_CLR 0x200088 /* Miscellaneous MD error clear */ +#define MD_MEM_DIMM_INIT 0x200090 /* Memory DIMM mode initization. */ +#define MD_DIR_DIMM_INIT 0x200098 /* Directory DIMM mode init. */ +#define MD_MOQ_SIZE 0x2000a0 /* MD outgoing queue size */ +#define MD_MLAN_CTL 0x2000a8 /* NIC (Microlan) control register */ + +#define MD_PERF_SEL 0x210000 /* Select perf monitor events */ +#define MD_PERF_CNT0 0x210010 /* Performance counter 0 */ +#define MD_PERF_CNT1 0x210018 /* Performance counter 1 */ +#define MD_PERF_CNT2 0x210020 /* Performance counter 2 */ +#define MD_PERF_CNT3 0x210028 /* Performance counter 3 */ +#define MD_PERF_CNT4 0x210030 /* Performance counter 4 */ +#define MD_PERF_CNT5 0x210038 /* Performance counter 5 */ + +#define MD_UREG0_0 0x220000 /* uController/UART 0 register */ +#define MD_UREG0_1 0x220008 /* uController/UART 0 register */ +#define MD_UREG0_2 0x220010 /* uController/UART 0 register */ +#define MD_UREG0_3 0x220018 /* uController/UART 0 register */ +#define MD_UREG0_4 0x220020 /* uController/UART 0 register */ +#define MD_UREG0_5 0x220028 /* uController/UART 0 register */ +#define MD_UREG0_6 0x220030 /* uController/UART 0 register */ +#define MD_UREG0_7 0x220038 /* uController/UART 0 register */ + +#define MD_SLOTID_USTAT 0x220048 /* Hub slot ID & UART/uCtlr status */ +#define MD_LED0 0x220050 /* Eight-bit LED for CPU A */ +#define MD_LED1 0x220058 /* Eight-bit LED for CPU B */ + +#define MD_UREG1_0 0x220080 /* uController/UART 1 register */ +#define MD_UREG1_1 0x220088 /* uController/UART 1 register */ +#define MD_UREG1_2 0x220090 /* uController/UART 1 register */ +#define MD_UREG1_3 0x220098 /* uController/UART 1 register */ +#define MD_UREG1_4 0x2200a0 /* uController/UART 1 register */ +#define MD_UREG1_5 0x2200a8 /* uController/UART 1 register */ +#define MD_UREG1_6 0x2200b0 /* uController/UART 1 register */ +#define MD_UREG1_7 0x2200b8 /* uController/UART 1 register */ +#define MD_UREG1_8 0x2200c0 /* uController/UART 1 register */ +#define MD_UREG1_9 0x2200c8 /* uController/UART 1 register */ +#define MD_UREG1_10 0x2200d0 /* uController/UART 1 register */ +#define MD_UREG1_11 0x2200d8 /* uController/UART 1 register */ +#define MD_UREG1_12 0x2200e0 /* uController/UART 1 register */ +#define MD_UREG1_13 0x2200e8 /* uController/UART 1 register */ +#define MD_UREG1_14 0x2200f0 /* uController/UART 1 register */ +#define MD_UREG1_15 0x2200f8 /* uController/UART 1 register */ + +#ifdef CONFIG_SGI_SN_N_MODE +#define MD_MEM_BANKS 4 /* 4 banks of memory max in N mode */ +#else +#define MD_MEM_BANKS 8 /* 8 banks of memory max in M mode */ +#endif + +/* + * MD_MEMORY_CONFIG fields + * + * MD_SIZE_xxx are useful for representing the size of a SIMM or bank + * (SIMM pair). They correspond to the values needed for the bit + * triplets (MMC_BANK_MASK) in the MD_MEMORY_CONFIG register for bank size. + * Bits not used by the MD are used by software. + */ + +#define MD_SIZE_EMPTY 0 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_8MB 1 +#define MD_SIZE_16MB 2 +#define MD_SIZE_32MB 3 /* Broken in Hub 1 */ +#define MD_SIZE_64MB 4 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_128MB 5 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_256MB 6 +#define MD_SIZE_512MB 7 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_1GB 8 +#define MD_SIZE_2GB 9 +#define MD_SIZE_4GB 10 + +#define MD_SIZE_BYTES(size) ((size) == 0 ? 0 : 0x400000L << (size)) +#define MD_SIZE_MBYTES(size) ((size) == 0 ? 0 : 4 << (size)) + +#define MMC_FPROM_CYC_SHFT 49 /* Have to use UINT64_CAST, instead */ +#define MMC_FPROM_CYC_MASK (UINT64_CAST 31 << 49) /* of 'L' suffix, */ +#define MMC_FPROM_WR_SHFT 44 /* for assembler */ +#define MMC_FPROM_WR_MASK (UINT64_CAST 31 << 44) +#define MMC_UCTLR_CYC_SHFT 39 +#define MMC_UCTLR_CYC_MASK (UINT64_CAST 31 << 39) +#define MMC_UCTLR_WR_SHFT 34 +#define MMC_UCTLR_WR_MASK (UINT64_CAST 31 << 34) +#define MMC_DIMM0_SEL_SHFT 32 +#define MMC_DIMM0_SEL_MASK (UINT64_CAST 3 << 32) +#define MMC_IO_PROT_EN_SHFT 31 +#define MMC_IO_PROT_EN_MASK (UINT64_CAST 1 << 31) +#define MMC_IO_PROT (UINT64_CAST 1 << 31) +#define MMC_ARB_MLSS_SHFT 30 +#define MMC_ARB_MLSS_MASK (UINT64_CAST 1 << 30) +#define MMC_ARB_MLSS (UINT64_CAST 1 << 30) +#define MMC_IGNORE_ECC_SHFT 29 +#define MMC_IGNORE_ECC_MASK (UINT64_CAST 1 << 29) +#define MMC_IGNORE_ECC (UINT64_CAST 1 << 29) +#define MMC_DIR_PREMIUM_SHFT 28 +#define MMC_DIR_PREMIUM_MASK (UINT64_CAST 1 << 28) +#define MMC_DIR_PREMIUM (UINT64_CAST 1 << 28) +#define MMC_REPLY_GUAR_SHFT 24 +#define MMC_REPLY_GUAR_MASK (UINT64_CAST 15 << 24) +#define MMC_BANK_SHFT(_b) ((_b) * 3) +#define MMC_BANK_MASK(_b) (UINT64_CAST 7 << MMC_BANK_SHFT(_b)) +#define MMC_BANK_ALL_MASK 0xffffff +#define MMC_RESET_DEFAULTS (UINT64_CAST 0x0f << MMC_FPROM_CYC_SHFT | \ + UINT64_CAST 0x07 << MMC_FPROM_WR_SHFT | \ + UINT64_CAST 0x1f << MMC_UCTLR_CYC_SHFT | \ + UINT64_CAST 0x0f << MMC_UCTLR_WR_SHFT | \ + MMC_IGNORE_ECC | MMC_DIR_PREMIUM | \ + UINT64_CAST 0x0f << MMC_REPLY_GUAR_SHFT | \ + MMC_BANK_ALL_MASK) + +/* MD_REFRESH_CONTROL fields */ + +#define MRC_ENABLE_SHFT 63 +#define MRC_ENABLE_MASK (UINT64_CAST 1 << 63) +#define MRC_ENABLE (UINT64_CAST 1 << 63) +#define MRC_COUNTER_SHFT 12 +#define MRC_COUNTER_MASK (UINT64_CAST 0xfff << 12) +#define MRC_CNT_THRESH_MASK 0xfff +#define MRC_RESET_DEFAULTS (UINT64_CAST 0x400) + +/* MD_MEM_DIMM_INIT and MD_DIR_DIMM_INIT fields */ + +#define MDI_SELECT_SHFT 32 +#define MDI_SELECT_MASK (UINT64_CAST 0x0f << 32) +#define MDI_DIMM_MODE_MASK (UINT64_CAST 0xfff) + +/* MD_MOQ_SIZE fields */ + +#define MMS_RP_SIZE_SHFT 8 +#define MMS_RP_SIZE_MASK (UINT64_CAST 0x3f << 8) +#define MMS_RQ_SIZE_SHFT 0 +#define MMS_RQ_SIZE_MASK (UINT64_CAST 0x1f) +#define MMS_RESET_DEFAULTS (0x32 << 8 | 0x12) + +/* MD_FANDOP_CAC_STAT fields */ + +#define MFC_VALID_SHFT 63 +#define MFC_VALID_MASK (UINT64_CAST 1 << 63) +#define MFC_VALID (UINT64_CAST 1 << 63) +#define MFC_ADDR_SHFT 6 +#define MFC_ADDR_MASK (UINT64_CAST 0x3ffffff) + +/* MD_MLAN_CTL fields */ + +#define MLAN_PHI1_SHFT 27 +#define MLAN_PHI1_MASK (UINT64_CAST 0x7f << 27) +#define MLAN_PHI0_SHFT 20 +#define MLAN_PHI0_MASK (UINT64_CAST 0x7f << 27) +#define MLAN_PULSE_SHFT 10 +#define MLAN_PULSE_MASK (UINT64_CAST 0x3ff << 10) +#define MLAN_SAMPLE_SHFT 2 +#define MLAN_SAMPLE_MASK (UINT64_CAST 0xff << 2) +#define MLAN_DONE_SHFT 1 +#define MLAN_DONE_MASK 2 +#define MLAN_DONE (UINT64_CAST 0x02) +#define MLAN_RD_DATA (UINT64_CAST 0x01) +#define MLAN_RESET_DEFAULTS (UINT64_CAST 0x31 << MLAN_PHI1_SHFT | \ + UINT64_CAST 0x31 << MLAN_PHI0_SHFT) + +/* MD_SLOTID_USTAT bit definitions */ + +#define MSU_CORECLK_TST_SHFT 7 /* You don't wanna know */ +#define MSU_CORECLK_TST_MASK (UINT64_CAST 1 << 7) +#define MSU_CORECLK_TST (UINT64_CAST 1 << 7) +#define MSU_CORECLK_SHFT 6 /* You don't wanna know */ +#define MSU_CORECLK_MASK (UINT64_CAST 1 << 6) +#define MSU_CORECLK (UINT64_CAST 1 << 6) +#define MSU_NETSYNC_SHFT 5 /* You don't wanna know */ +#define MSU_NETSYNC_MASK (UINT64_CAST 1 << 5) +#define MSU_NETSYNC (UINT64_CAST 1 << 5) +#define MSU_FPROMRDY_SHFT 4 /* Flash PROM ready bit */ +#define MSU_FPROMRDY_MASK (UINT64_CAST 1 << 4) +#define MSU_FPROMRDY (UINT64_CAST 1 << 4) +#define MSU_I2CINTR_SHFT 3 /* I2C interrupt bit */ +#define MSU_I2CINTR_MASK (UINT64_CAST 1 << 3) +#define MSU_I2CINTR (UINT64_CAST 1 << 3) +#define MSU_SLOTID_MASK 0xff +#define MSU_SN0_SLOTID_SHFT 0 /* Slot ID */ +#define MSU_SN0_SLOTID_MASK (UINT64_CAST 7) +#define MSU_SN00_SLOTID_SHFT 7 +#define MSU_SN00_SLOTID_MASK (UINT64_CAST 0x80) + +#define MSU_PIMM_PSC_SHFT 4 +#define MSU_PIMM_PSC_MASK (0xf << MSU_PIMM_PSC_SHFT) + +/* MD_MIG_DIFF_THRESH bit definitions */ + +#define MD_MIG_DIFF_THRES_VALID_MASK (UINT64_CAST 0x1 << 63) +#define MD_MIG_DIFF_THRES_VALID_SHFT 63 +#define MD_MIG_DIFF_THRES_VALUE_MASK (UINT64_CAST 0xfffff) + +/* MD_MIG_VALUE_THRESH bit definitions */ + +#define MD_MIG_VALUE_THRES_VALID_MASK (UINT64_CAST 0x1 << 63) +#define MD_MIG_VALUE_THRES_VALID_SHFT 63 +#define MD_MIG_VALUE_THRES_VALUE_MASK (UINT64_CAST 0xfffff) + +/* MD_MIG_CANDIDATE bit definitions */ + +#define MD_MIG_CANDIDATE_VALID_MASK (UINT64_CAST 0x1 << 63) +#define MD_MIG_CANDIDATE_VALID_SHFT 63 +#define MD_MIG_CANDIDATE_TYPE_MASK (UINT64_CAST 0x1 << 30) +#define MD_MIG_CANDIDATE_TYPE_SHFT 30 +#define MD_MIG_CANDIDATE_OVERRUN_MASK (UINT64_CAST 0x1 << 29) +#define MD_MIG_CANDIDATE_OVERRUN_SHFT 29 +#define MD_MIG_CANDIDATE_INITIATOR_MASK (UINT64_CAST 0x7ff << 18) +#define MD_MIG_CANDIDATE_INITIATOR_SHFT 18 +#define MD_MIG_CANDIDATE_NODEID_MASK (UINT64_CAST 0x1ff << 20) +#define MD_MIG_CANDIDATE_NODEID_SHFT 20 +#define MD_MIG_CANDIDATE_ADDR_MASK (UINT64_CAST 0x3ffff) +#define MD_MIG_CANDIDATE_ADDR_SHFT 14 /* The address starts at bit 14 */ + +/* Other MD definitions */ + +#define MD_BANK_SHFT 29 /* log2(512 MB) */ +#define MD_BANK_MASK (UINT64_CAST 7 << 29) +#define MD_BANK_SIZE (UINT64_CAST 1 << MD_BANK_SHFT) /* 512 MB */ +#define MD_BANK_OFFSET(_b) (UINT64_CAST (_b) << MD_BANK_SHFT) + +/* + * The following definitions cover the bit field definitions for the + * various MD registers. For multi-bit registers, we define both + * a shift amount and a mask value. By convention, if you want to + * isolate a field, you should mask the field and then shift it down, + * since this makes the masks useful without a shift. + */ + +/* Directory entry states for both premium and standard SIMMs. */ + +#define MD_DIR_SHARED (UINT64_CAST 0x0) /* 000 */ +#define MD_DIR_POISONED (UINT64_CAST 0x1) /* 001 */ +#define MD_DIR_EXCLUSIVE (UINT64_CAST 0x2) /* 010 */ +#define MD_DIR_BUSY_SHARED (UINT64_CAST 0x3) /* 011 */ +#define MD_DIR_BUSY_EXCL (UINT64_CAST 0x4) /* 100 */ +#define MD_DIR_WAIT (UINT64_CAST 0x5) /* 101 */ +#define MD_DIR_UNOWNED (UINT64_CAST 0x7) /* 111 */ + +/* + * The MD_DIR_FORCE_ECC bit can be added directory entry write data + * to forcing the ECC to be written as-is instead of recalculated. + */ + +#define MD_DIR_FORCE_ECC (UINT64_CAST 1 << 63) + +/* + * Premium SIMM directory entry shifts and masks. Each is valid only in the + * context(s) indicated, where A, B, and C indicate the directory entry format + * as shown, and low and/or high indicates which double-word of the entry. + * + * Format A: STATE = shared, FINE = 1 + * Format B: STATE = shared, FINE = 0 + * Format C: STATE != shared (FINE must be 0) + */ + +#define MD_PDIR_MASK 0xffffffffffff /* Whole entry */ +#define MD_PDIR_ECC_SHFT 0 /* ABC low or high */ +#define MD_PDIR_ECC_MASK 0x7f +#define MD_PDIR_PRIO_SHFT 8 /* ABC low */ +#define MD_PDIR_PRIO_MASK (0xf << 8) +#define MD_PDIR_AX_SHFT 7 /* ABC low */ +#define MD_PDIR_AX_MASK (1 << 7) +#define MD_PDIR_AX (1 << 7) +#define MD_PDIR_FINE_SHFT 12 /* ABC low */ +#define MD_PDIR_FINE_MASK (1 << 12) +#define MD_PDIR_FINE (1 << 12) +#define MD_PDIR_OCT_SHFT 13 /* A low */ +#define MD_PDIR_OCT_MASK (7 << 13) +#define MD_PDIR_STATE_SHFT 13 /* BC low */ +#define MD_PDIR_STATE_MASK (7 << 13) +#define MD_PDIR_ONECNT_SHFT 16 /* BC low */ +#define MD_PDIR_ONECNT_MASK (0x3f << 16) +#define MD_PDIR_PTR_SHFT 22 /* C low */ +#define MD_PDIR_PTR_MASK (UINT64_CAST 0x7ff << 22) +#define MD_PDIR_VECMSB_SHFT 22 /* AB low */ +#define MD_PDIR_VECMSB_BITMASK 0x3ffffff +#define MD_PDIR_VECMSB_BITSHFT 27 +#define MD_PDIR_VECMSB_MASK (UINT64_CAST MD_PDIR_VECMSB_BITMASK << 22) +#define MD_PDIR_CWOFF_SHFT 7 /* C high */ +#define MD_PDIR_CWOFF_MASK (7 << 7) +#define MD_PDIR_VECLSB_SHFT 10 /* AB high */ +#define MD_PDIR_VECLSB_BITMASK (UINT64_CAST 0x3fffffffff) +#define MD_PDIR_VECLSB_BITSHFT 0 +#define MD_PDIR_VECLSB_MASK (MD_PDIR_VECLSB_BITMASK << 10) + +/* + * Directory initialization values + */ + +#define MD_PDIR_INIT_LO (MD_DIR_UNOWNED << MD_PDIR_STATE_SHFT | \ + MD_PDIR_AX) +#define MD_PDIR_INIT_HI 0 +#define MD_PDIR_INIT_PROT (MD_PROT_RW << MD_PPROT_IO_SHFT | \ + MD_PROT_RW << MD_PPROT_SHFT) + +/* + * Standard SIMM directory entry shifts and masks. Each is valid only in the + * context(s) indicated, where A and C indicate the directory entry format + * as shown, and low and/or high indicates which double-word of the entry. + * + * Format A: STATE == shared + * Format C: STATE != shared + */ + +#define MD_SDIR_MASK 0xffff /* Whole entry */ +#define MD_SDIR_ECC_SHFT 0 /* AC low or high */ +#define MD_SDIR_ECC_MASK 0x1f +#define MD_SDIR_PRIO_SHFT 6 /* AC low */ +#define MD_SDIR_PRIO_MASK (1 << 6) +#define MD_SDIR_AX_SHFT 5 /* AC low */ +#define MD_SDIR_AX_MASK (1 << 5) +#define MD_SDIR_AX (1 << 5) +#define MD_SDIR_STATE_SHFT 7 /* AC low */ +#define MD_SDIR_STATE_MASK (7 << 7) +#define MD_SDIR_PTR_SHFT 10 /* C low */ +#define MD_SDIR_PTR_MASK (0x3f << 10) +#define MD_SDIR_CWOFF_SHFT 5 /* C high */ +#define MD_SDIR_CWOFF_MASK (7 << 5) +#define MD_SDIR_VECMSB_SHFT 11 /* A low */ +#define MD_SDIR_VECMSB_BITMASK 0x1f +#define MD_SDIR_VECMSB_BITSHFT 7 +#define MD_SDIR_VECMSB_MASK (MD_SDIR_VECMSB_BITMASK << 11) +#define MD_SDIR_VECLSB_SHFT 5 /* A high */ +#define MD_SDIR_VECLSB_BITMASK 0x7ff +#define MD_SDIR_VECLSB_BITSHFT 0 +#define MD_SDIR_VECLSB_MASK (MD_SDIR_VECLSB_BITMASK << 5) + +/* + * Directory initialization values + */ + +#define MD_SDIR_INIT_LO (MD_DIR_UNOWNED << MD_SDIR_STATE_SHFT | \ + MD_SDIR_AX) +#define MD_SDIR_INIT_HI 0 +#define MD_SDIR_INIT_PROT (MD_PROT_RW << MD_SPROT_SHFT) + +/* Protection and migration field values */ + +#define MD_PROT_RW (UINT64_CAST 0x6) +#define MD_PROT_RO (UINT64_CAST 0x3) +#define MD_PROT_NO (UINT64_CAST 0x0) +#define MD_PROT_BAD (UINT64_CAST 0x5) + +/* Premium SIMM protection entry shifts and masks. */ + +#define MD_PPROT_SHFT 0 /* Prot. field */ +#define MD_PPROT_MASK 7 +#define MD_PPROT_MIGMD_SHFT 3 /* Migration mode */ +#define MD_PPROT_MIGMD_MASK (3 << 3) +#define MD_PPROT_REFCNT_SHFT 5 /* Reference count */ +#define MD_PPROT_REFCNT_WIDTH 0x7ffff +#define MD_PPROT_REFCNT_MASK (MD_PPROT_REFCNT_WIDTH << 5) + +#define MD_PPROT_IO_SHFT 45 /* I/O Prot field */ +#define MD_PPROT_IO_MASK (UINT64_CAST 7 << 45) + +/* Standard SIMM protection entry shifts and masks. */ + +#define MD_SPROT_SHFT 0 /* Prot. field */ +#define MD_SPROT_MASK 7 +#define MD_SPROT_MIGMD_SHFT 3 /* Migration mode */ +#define MD_SPROT_MIGMD_MASK (3 << 3) +#define MD_SPROT_REFCNT_SHFT 5 /* Reference count */ +#define MD_SPROT_REFCNT_WIDTH 0x7ff +#define MD_SPROT_REFCNT_MASK (MD_SPROT_REFCNT_WIDTH << 5) + +/* Migration modes used in protection entries */ + +#define MD_PROT_MIGMD_IREL (UINT64_CAST 0x3 << 3) +#define MD_PROT_MIGMD_IABS (UINT64_CAST 0x2 << 3) +#define MD_PROT_MIGMD_PREL (UINT64_CAST 0x1 << 3) +#define MD_PROT_MIGMD_OFF (UINT64_CAST 0x0 << 3) + + +/* + * Operations on page migration threshold register + */ + +#ifndef __ASSEMBLY__ + +/* + * LED register macros + */ + +#define CPU_LED_ADDR(_nasid, _slice) \ + (private.p_sn00 ? \ + REMOTE_HUB_ADDR((_nasid), MD_UREG1_0 + ((_slice) << 5)) : \ + REMOTE_HUB_ADDR((_nasid), MD_LED0 + ((_slice) << 3))) + +#define SET_CPU_LEDS(_nasid, _slice, _val) \ + (HUB_S(CPU_LED_ADDR(_nasid, _slice), (_val))) + +#define SET_MY_LEDS(_v) \ + SET_CPU_LEDS(get_nasid(), get_slice(), (_v)) + +/* + * Operations on Memory/Directory DIMM control register + */ + +#define DIRTYPE_PREMIUM 1 +#define DIRTYPE_STANDARD 0 +#define MD_MEMORY_CONFIG_DIR_TYPE_GET(region) (\ + (REMOTE_HUB_L(region, MD_MEMORY_CONFIG) & MMC_DIR_PREMIUM_MASK) >> \ + MMC_DIR_PREMIUM_SHFT) + + +/* + * Operations on page migration count difference and absolute threshold + * registers + */ + +#define MD_MIG_DIFF_THRESH_GET(region) ( \ + REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) & \ + MD_MIG_DIFF_THRES_VALUE_MASK) + +#define MD_MIG_DIFF_THRESH_SET(region, value) ( \ + REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH, \ + MD_MIG_DIFF_THRES_VALID_MASK | (value))) + +#define MD_MIG_DIFF_THRESH_DISABLE(region) ( \ + REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH, \ + REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) \ + & ~MD_MIG_DIFF_THRES_VALID_MASK)) + +#define MD_MIG_DIFF_THRESH_ENABLE(region) ( \ + REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH, \ + REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) \ + | MD_MIG_DIFF_THRES_VALID_MASK)) + +#define MD_MIG_DIFF_THRESH_IS_ENABLED(region) ( \ + REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) & \ + MD_MIG_DIFF_THRES_VALID_MASK) + +#define MD_MIG_VALUE_THRESH_GET(region) ( \ + REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) & \ + MD_MIG_VALUE_THRES_VALUE_MASK) + +#define MD_MIG_VALUE_THRESH_SET(region, value) ( \ + REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH, \ + MD_MIG_VALUE_THRES_VALID_MASK | (value))) + +#define MD_MIG_VALUE_THRESH_DISABLE(region) ( \ + REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH, \ + REMOTE_HUB_L(region, MD_MIG_VALUE_THRESH) \ + & ~MD_MIG_VALUE_THRES_VALID_MASK)) + +#define MD_MIG_VALUE_THRESH_ENABLE(region) ( \ + REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH, \ + REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) \ + | MD_MIG_VALUE_THRES_VALID_MASK)) + +#define MD_MIG_VALUE_THRESH_IS_ENABLED(region) ( \ + REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) & \ + MD_MIG_VALUE_THRES_VALID_MASK) + +/* + * Operations on page migration candidate register + */ + +#define MD_MIG_CANDIDATE_GET(my_region_id) ( \ + REMOTE_HUB_L((my_region_id), MD_MIG_CANDIDATE_CLR)) + +#define MD_MIG_CANDIDATE_HWPFN(value) ((value) & MD_MIG_CANDIDATE_ADDR_MASK) + +#define MD_MIG_CANDIDATE_NODEID(value) ( \ + ((value) & MD_MIG_CANDIDATE_NODEID_MASK) >> MD_MIG_CANDIDATE_NODEID_SHFT) + +#define MD_MIG_CANDIDATE_TYPE(value) ( \ + ((value) & MD_MIG_CANDIDATE_TYPE_MASK) >> MD_MIG_CANDIDATE_TYPE_SHFT) + +#define MD_MIG_CANDIDATE_VALID(value) ( \ + ((value) & MD_MIG_CANDIDATE_VALID_MASK) >> MD_MIG_CANDIDATE_VALID_SHFT) + +/* + * Macros to retrieve fields in the protection entry + */ + +/* for Premium SIMM */ +#define MD_PPROT_REFCNT_GET(value) ( \ + ((value) & MD_PPROT_REFCNT_MASK) >> MD_PPROT_REFCNT_SHFT) + +#define MD_PPROT_MIGMD_GET(value) ( \ + ((value) & MD_PPROT_MIGMD_MASK) >> MD_PPROT_MIGMD_SHFT) + +/* for Standard SIMM */ +#define MD_SPROT_REFCNT_GET(value) ( \ + ((value) & MD_SPROT_REFCNT_MASK) >> MD_SPROT_REFCNT_SHFT) + +#define MD_SPROT_MIGMD_GET(value) ( \ + ((value) & MD_SPROT_MIGMD_MASK) >> MD_SPROT_MIGMD_SHFT) + +/* + * Format of dir_error, mem_error, protocol_error and misc_error registers + */ + +struct dir_error_reg { + u64 uce_vld: 1, /* 63: valid directory uce */ + ae_vld: 1, /* 62: valid dir prot ecc error */ + ce_vld: 1, /* 61: valid correctable ECC err*/ + rsvd1: 19, /* 60-42: reserved */ + bad_prot: 3, /* 41-39: encoding, bad access rights*/ + bad_syn: 7, /* 38-32: bad dir syndrome */ + rsvd2: 2, /* 31-30: reserved */ + hspec_addr:27, /* 29-03: bddir space bad entry */ + uce_ovr: 1, /* 2: multiple dir uce's */ + ae_ovr: 1, /* 1: multiple prot ecc errs*/ + ce_ovr: 1; /* 0: multiple correctable errs */ +}; + +typedef union md_dir_error { + u64 derr_reg; /* the entire register */ + struct dir_error_reg derr_fmt; /* the register format */ +} md_dir_error_t; + + +struct mem_error_reg { + u64 uce_vld: 1, /* 63: valid memory uce */ + ce_vld: 1, /* 62: valid correctable ECC err*/ + rsvd1: 22, /* 61-40: reserved */ + bad_syn: 8, /* 39-32: bad mem ecc syndrome */ + address: 29, /* 31-03: bad entry pointer */ + rsvd2: 1, /* 2: reserved */ + uce_ovr: 1, /* 1: multiple mem uce's */ + ce_ovr: 1; /* 0: multiple correctable errs */ +}; + + +typedef union md_mem_error { + u64 merr_reg; /* the entire register */ + struct mem_error_reg merr_fmt; /* format of the mem_error reg */ +} md_mem_error_t; + + +struct proto_error_reg { + u64 valid: 1, /* 63: valid protocol error */ + rsvd1: 2, /* 62-61: reserved */ + initiator:11, /* 60-50: id of request initiator*/ + backoff: 2, /* 49-48: backoff control */ + msg_type: 8, /* 47-40: type of request */ + access: 2, /* 39-38: access rights of initiator*/ + priority: 1, /* 37: priority level of requestor*/ + dir_state: 4, /* 36-33: state of directory */ + pointer_me:1, /* 32: initiator same as dir ptr */ + address: 29, /* 31-03: request address */ + rsvd2: 2, /* 02-01: reserved */ + overrun: 1; /* 0: multiple protocol errs */ +}; + +typedef union md_proto_error { + u64 perr_reg; /* the entire register */ + struct proto_error_reg perr_fmt; /* format of the register */ +} md_proto_error_t; + + +struct md_sdir_high_fmt { + unsigned short sd_hi_bvec : 11, + sd_hi_ecc : 5; +}; + + +typedef union md_sdir_high { + /* The 16 bits of standard directory, upper word */ + unsigned short sd_hi_val; + struct md_sdir_high_fmt sd_hi_fmt; +}md_sdir_high_t; + + +struct md_sdir_low_shared_fmt { + /* The meaning of lower directory, shared */ + unsigned short sds_lo_bvec : 5, + sds_lo_unused: 1, + sds_lo_state : 3, + sds_lo_prio : 1, + sds_lo_ax : 1, + sds_lo_ecc : 5; +}; + +struct md_sdir_low_exclusive_fmt { + /* The meaning of lower directory, exclusive */ + unsigned short sde_lo_ptr : 6, + sde_lo_state : 3, + sde_lo_prio : 1, + sde_lo_ax : 1, + sde_lo_ecc : 5; +}; + + +typedef union md_sdir_low { + /* The 16 bits of standard directory, lower word */ + unsigned short sd_lo_val; + struct md_sdir_low_exclusive_fmt sde_lo_fmt; + struct md_sdir_low_shared_fmt sds_lo_fmt; +}md_sdir_low_t; + + + +struct md_pdir_high_fmt { + u64 pd_hi_unused : 16, + pd_hi_bvec : 38, + pd_hi_unused1 : 3, + pd_hi_ecc : 7; +}; + + +typedef union md_pdir_high { + /* The 48 bits of standard directory, upper word */ + u64 pd_hi_val; + struct md_pdir_high_fmt pd_hi_fmt; +}md_pdir_high_t; + + +struct md_pdir_low_shared_fmt { + /* The meaning of lower directory, shared */ + u64 pds_lo_unused : 16, + pds_lo_bvec : 26, + pds_lo_cnt : 6, + pds_lo_state : 3, + pds_lo_ste : 1, + pds_lo_prio : 4, + pds_lo_ax : 1, + pds_lo_ecc : 7; +}; + +struct md_pdir_low_exclusive_fmt { + /* The meaning of lower directory, exclusive */ + u64 pde_lo_unused : 31, + pde_lo_ptr : 11, + pde_lo_unused1 : 6, + pde_lo_state : 3, + pde_lo_ste : 1, + pde_lo_prio : 4, + pde_lo_ax : 1, + pde_lo_ecc : 7; +}; + + +typedef union md_pdir_loent { + /* The 48 bits of premium directory, lower word */ + u64 pd_lo_val; + struct md_pdir_low_exclusive_fmt pde_lo_fmt; + struct md_pdir_low_shared_fmt pds_lo_fmt; +}md_pdir_low_t; + + +/* + * the following two "union" definitions and two + * "struct" definitions are used in vmdump.c to + * represent directory memory information. + */ + +typedef union md_dir_high { + md_sdir_high_t md_sdir_high; + md_pdir_high_t md_pdir_high; +} md_dir_high_t; + +typedef union md_dir_low { + md_sdir_low_t md_sdir_low; + md_pdir_low_t md_pdir_low; +} md_dir_low_t; + +typedef struct bddir_entry { + md_dir_low_t md_dir_low; + md_dir_high_t md_dir_high; +} bddir_entry_t; + +typedef struct dir_mem_entry { + u64 prcpf[MAX_REGIONS]; + bddir_entry_t directory_words[MD_PAGE_SIZE/CACHE_SLINE_SIZE]; +} dir_mem_entry_t; + + + +typedef union md_perf_sel { + u64 perf_sel_reg; + struct { + u64 perf_rsvd : 60, + perf_en : 1, + perf_sel : 3; + } perf_sel_bits; +} md_perf_sel_t; + +typedef union md_perf_cnt { + u64 perf_cnt; + struct { + u64 perf_rsvd : 44, + perf_cnt : 20; + } perf_cnt_bits; +} md_perf_cnt_t; + + +#endif /* !__ASSEMBLY__ */ + + +#define DIR_ERROR_VALID_MASK 0xe000000000000000 +#define DIR_ERROR_VALID_SHFT 61 +#define DIR_ERROR_VALID_UCE 0x8000000000000000 +#define DIR_ERROR_VALID_AE 0x4000000000000000 +#define DIR_ERROR_VALID_CE 0x2000000000000000 + +#define MEM_ERROR_VALID_MASK 0xc000000000000000 +#define MEM_ERROR_VALID_SHFT 62 +#define MEM_ERROR_VALID_UCE 0x8000000000000000 +#define MEM_ERROR_VALID_CE 0x4000000000000000 + +#define PROTO_ERROR_VALID_MASK 0x8000000000000000 + +#define MISC_ERROR_VALID_MASK 0x3ff + +/* + * Mask for hspec address that is stored in the dir error register. + * This represents bits 29 through 3. + */ +#define DIR_ERR_HSPEC_MASK 0x3ffffff8 +#define ERROR_HSPEC_MASK 0x3ffffff8 +#define ERROR_HSPEC_SHFT 3 +#define ERROR_ADDR_MASK 0xfffffff8 +#define ERROR_ADDR_SHFT 3 + +/* + * MD_MISC_ERROR register defines. + */ + +#define MMCE_VALID_MASK 0x3ff +#define MMCE_ILL_MSG_SHFT 8 +#define MMCE_ILL_MSG_MASK (UINT64_CAST 0x03 << MMCE_ILL_MSG_SHFT) +#define MMCE_ILL_REV_SHFT 6 +#define MMCE_ILL_REV_MASK (UINT64_CAST 0x03 << MMCE_ILL_REV_SHFT) +#define MMCE_LONG_PACK_SHFT 4 +#define MMCE_LONG_PACK_MASK (UINT64_CAST 0x03 << MMCE_lONG_PACK_SHFT) +#define MMCE_SHORT_PACK_SHFT 2 +#define MMCE_SHORT_PACK_MASK (UINT64_CAST 0x03 << MMCE_SHORT_PACK_SHFT) +#define MMCE_BAD_DATA_SHFT 0 +#define MMCE_BAD_DATA_MASK (UINT64_CAST 0x03 << MMCE_BAD_DATA_SHFT) + + +#define MD_PERF_COUNTERS 6 +#define MD_PERF_SETS 6 + +#define MEM_DIMM_MASK 0xe0000000 +#define MEM_DIMM_SHFT 29 + +#endif /* _ASM_SN_SN0_HUBMD_H */ diff --git a/arch/mips/include/asm/sn/sn0/hubni.h b/arch/mips/include/asm/sn/sn0/hubni.h new file mode 100644 index 000000000000..b40d3ef97a12 --- /dev/null +++ b/arch/mips/include/asm/sn/sn0/hubni.h @@ -0,0 +1,255 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX <sys/SN/SN0/hubni.h>, Revision 1.27. + * + * Copyright (C) 1992-1997, 1999 Silicon Graphics, Inc. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_SGI_SN0_HUBNI_H +#define _ASM_SGI_SN0_HUBNI_H + +#ifndef __ASSEMBLY__ +#include <linux/types.h> +#endif + +/* + * Hub Network Interface registers + * + * All registers in this file are subject to change until Hub chip tapeout. + */ + +#define NI_BASE 0x600000 +#define NI_BASE_TABLES 0x630000 + +#define NI_STATUS_REV_ID 0x600000 /* Hub network status, rev, and ID */ +#define NI_PORT_RESET 0x600008 /* Reset the network interface */ +#define NI_PROTECTION 0x600010 /* NI register access permissions */ +#define NI_GLOBAL_PARMS 0x600018 /* LLP parameters */ +#define NI_SCRATCH_REG0 0x600100 /* Scratch register 0 (64 bits) */ +#define NI_SCRATCH_REG1 0x600108 /* Scratch register 1 (64 bits) */ +#define NI_DIAG_PARMS 0x600110 /* Parameters for diags */ + +#define NI_VECTOR_PARMS 0x600200 /* Vector PIO routing parameters */ +#define NI_VECTOR 0x600208 /* Vector PIO route */ +#define NI_VECTOR_DATA 0x600210 /* Vector PIO data */ +#define NI_VECTOR_STATUS 0x600300 /* Vector PIO return status */ +#define NI_RETURN_VECTOR 0x600308 /* Vector PIO return vector */ +#define NI_VECTOR_READ_DATA 0x600310 /* Vector PIO read data */ +#define NI_VECTOR_CLEAR 0x600380 /* Vector PIO read & clear status */ + +#define NI_IO_PROTECT 0x600400 /* PIO protection bits */ +#define NI_IO_PROT_OVRRD 0x600408 /* PIO protection bit override */ + +#define NI_AGE_CPU0_MEMORY 0x600500 /* CPU 0 memory age control */ +#define NI_AGE_CPU0_PIO 0x600508 /* CPU 0 PIO age control */ +#define NI_AGE_CPU1_MEMORY 0x600510 /* CPU 1 memory age control */ +#define NI_AGE_CPU1_PIO 0x600518 /* CPU 1 PIO age control */ +#define NI_AGE_GBR_MEMORY 0x600520 /* GBR memory age control */ +#define NI_AGE_GBR_PIO 0x600528 /* GBR PIO age control */ +#define NI_AGE_IO_MEMORY 0x600530 /* IO memory age control */ +#define NI_AGE_IO_PIO 0x600538 /* IO PIO age control */ +#define NI_AGE_REG_MIN NI_AGE_CPU0_MEMORY +#define NI_AGE_REG_MAX NI_AGE_IO_PIO + +#define NI_PORT_PARMS 0x608000 /* LLP Parameters */ +#define NI_PORT_ERROR 0x608008 /* LLP Errors */ +#define NI_PORT_ERROR_CLEAR 0x608088 /* Clear the error bits */ + +#define NI_META_TABLE0 0x638000 /* First meta routing table entry */ +#define NI_META_TABLE(_x) (NI_META_TABLE0 + (8 * (_x))) +#define NI_META_ENTRIES 32 + +#define NI_LOCAL_TABLE0 0x638100 /* First local routing table entry */ +#define NI_LOCAL_TABLE(_x) (NI_LOCAL_TABLE0 + (8 * (_x))) +#define NI_LOCAL_ENTRIES 16 + +/* + * NI_STATUS_REV_ID mask and shift definitions + * Have to use UINT64_CAST instead of 'L' suffix, for assembler. + */ + +#define NSRI_8BITMODE_SHFT 30 +#define NSRI_8BITMODE_MASK (UINT64_CAST 0x1 << 30) +#define NSRI_LINKUP_SHFT 29 +#define NSRI_LINKUP_MASK (UINT64_CAST 0x1 << 29) +#define NSRI_DOWNREASON_SHFT 28 /* 0=failed, 1=never came */ +#define NSRI_DOWNREASON_MASK (UINT64_CAST 0x1 << 28) /* out of reset. */ +#define NSRI_MORENODES_SHFT 18 +#define NSRI_MORENODES_MASK (UINT64_CAST 1 << 18) /* Max. # of nodes */ +#define MORE_MEMORY 0 +#define MORE_NODES 1 +#define NSRI_REGIONSIZE_SHFT 17 +#define NSRI_REGIONSIZE_MASK (UINT64_CAST 1 << 17) /* Granularity */ +#define REGIONSIZE_FINE 1 +#define REGIONSIZE_COARSE 0 +#define NSRI_NODEID_SHFT 8 +#define NSRI_NODEID_MASK (UINT64_CAST 0x1ff << 8)/* Node (Hub) ID */ +#define NSRI_REV_SHFT 4 +#define NSRI_REV_MASK (UINT64_CAST 0xf << 4) /* Chip Revision */ +#define NSRI_CHIPID_SHFT 0 +#define NSRI_CHIPID_MASK (UINT64_CAST 0xf) /* Chip type ID */ + +/* + * In fine mode, each node is a region. In coarse mode, there are + * eight nodes per region. + */ +#define NASID_TO_FINEREG_SHFT 0 +#define NASID_TO_COARSEREG_SHFT 3 + +/* NI_PORT_RESET mask definitions */ + +#define NPR_PORTRESET (UINT64_CAST 1 << 7) /* Send warm reset */ +#define NPR_LINKRESET (UINT64_CAST 1 << 1) /* Send link reset */ +#define NPR_LOCALRESET (UINT64_CAST 1) /* Reset entire hub */ + +/* NI_PROTECTION mask and shift definitions */ + +#define NPROT_RESETOK (UINT64_CAST 1) + +/* NI_GLOBAL_PARMS mask and shift definitions */ + +#define NGP_MAXRETRY_SHFT 48 /* Maximum retries */ +#define NGP_MAXRETRY_MASK (UINT64_CAST 0x3ff << 48) +#define NGP_TAILTOWRAP_SHFT 32 /* Tail timeout wrap */ +#define NGP_TAILTOWRAP_MASK (UINT64_CAST 0xffff << 32) + +#define NGP_CREDITTOVAL_SHFT 16 /* Tail timeout wrap */ +#define NGP_CREDITTOVAL_MASK (UINT64_CAST 0xf << 16) +#define NGP_TAILTOVAL_SHFT 4 /* Tail timeout value */ +#define NGP_TAILTOVAL_MASK (UINT64_CAST 0xf << 4) + +/* NI_DIAG_PARMS mask and shift definitions */ + +#define NDP_PORTTORESET (UINT64_CAST 1 << 18) /* Port tmout reset */ +#define NDP_LLP8BITMODE (UINT64_CAST 1 << 12) /* LLP 8-bit mode */ +#define NDP_PORTDISABLE (UINT64_CAST 1 << 6) /* Port disable */ +#define NDP_SENDERROR (UINT64_CAST 1) /* Send data error */ + +/* + * NI_VECTOR_PARMS mask and shift definitions. + * TYPE may be any of the first four PIOTYPEs defined under NI_VECTOR_STATUS. + */ + +#define NVP_PIOID_SHFT 40 +#define NVP_PIOID_MASK (UINT64_CAST 0x3ff << 40) +#define NVP_WRITEID_SHFT 32 +#define NVP_WRITEID_MASK (UINT64_CAST 0xff << 32) +#define NVP_ADDRESS_MASK (UINT64_CAST 0xffff8) /* Bits 19:3 */ +#define NVP_TYPE_SHFT 0 +#define NVP_TYPE_MASK (UINT64_CAST 0x3) + +/* NI_VECTOR_STATUS mask and shift definitions */ + +#define NVS_VALID (UINT64_CAST 1 << 63) +#define NVS_OVERRUN (UINT64_CAST 1 << 62) +#define NVS_TARGET_SHFT 51 +#define NVS_TARGET_MASK (UINT64_CAST 0x3ff << 51) +#define NVS_PIOID_SHFT 40 +#define NVS_PIOID_MASK (UINT64_CAST 0x3ff << 40) +#define NVS_WRITEID_SHFT 32 +#define NVS_WRITEID_MASK (UINT64_CAST 0xff << 32) +#define NVS_ADDRESS_MASK (UINT64_CAST 0xfffffff8) /* Bits 31:3 */ +#define NVS_TYPE_SHFT 0 +#define NVS_TYPE_MASK (UINT64_CAST 0x7) +#define NVS_ERROR_MASK (UINT64_CAST 0x4) /* bit set means error */ + + +#define PIOTYPE_READ 0 /* VECTOR_PARMS and VECTOR_STATUS */ +#define PIOTYPE_WRITE 1 /* VECTOR_PARMS and VECTOR_STATUS */ +#define PIOTYPE_UNDEFINED 2 /* VECTOR_PARMS and VECTOR_STATUS */ +#define PIOTYPE_EXCHANGE 3 /* VECTOR_PARMS and VECTOR_STATUS */ +#define PIOTYPE_ADDR_ERR 4 /* VECTOR_STATUS only */ +#define PIOTYPE_CMD_ERR 5 /* VECTOR_STATUS only */ +#define PIOTYPE_PROT_ERR 6 /* VECTOR_STATUS only */ +#define PIOTYPE_UNKNOWN 7 /* VECTOR_STATUS only */ + +/* NI_AGE_XXX mask and shift definitions */ + +#define NAGE_VCH_SHFT 10 +#define NAGE_VCH_MASK (UINT64_CAST 3 << 10) +#define NAGE_CC_SHFT 8 +#define NAGE_CC_MASK (UINT64_CAST 3 << 8) +#define NAGE_AGE_SHFT 0 +#define NAGE_AGE_MASK (UINT64_CAST 0xff) +#define NAGE_MASK (NAGE_VCH_MASK | NAGE_CC_MASK | NAGE_AGE_MASK) + +#define VCHANNEL_A 0 +#define VCHANNEL_B 1 +#define VCHANNEL_ANY 2 + +/* NI_PORT_PARMS mask and shift definitions */ + +#define NPP_NULLTO_SHFT 10 +#define NPP_NULLTO_MASK (UINT64_CAST 0x3f << 16) +#define NPP_MAXBURST_SHFT 0 +#define NPP_MAXBURST_MASK (UINT64_CAST 0x3ff) +#define NPP_RESET_DFLT_HUB20 ((UINT64_CAST 1 << NPP_NULLTO_SHFT) | \ + (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT)) +#define NPP_RESET_DEFAULTS ((UINT64_CAST 6 << NPP_NULLTO_SHFT) | \ + (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT)) + + +/* NI_PORT_ERROR mask and shift definitions */ + +#define NPE_LINKRESET (UINT64_CAST 1 << 37) +#define NPE_INTERNALERROR (UINT64_CAST 1 << 36) +#define NPE_BADMESSAGE (UINT64_CAST 1 << 35) +#define NPE_BADDEST (UINT64_CAST 1 << 34) +#define NPE_FIFOOVERFLOW (UINT64_CAST 1 << 33) +#define NPE_CREDITTO_SHFT 28 +#define NPE_CREDITTO_MASK (UINT64_CAST 0xf << 28) +#define NPE_TAILTO_SHFT 24 +#define NPE_TAILTO_MASK (UINT64_CAST 0xf << 24) +#define NPE_RETRYCOUNT_SHFT 16 +#define NPE_RETRYCOUNT_MASK (UINT64_CAST 0xff << 16) +#define NPE_CBERRCOUNT_SHFT 8 +#define NPE_CBERRCOUNT_MASK (UINT64_CAST 0xff << 8) +#define NPE_SNERRCOUNT_SHFT 0 +#define NPE_SNERRCOUNT_MASK (UINT64_CAST 0xff << 0) +#define NPE_MASK 0x3effffffff + +#define NPE_COUNT_MAX 0xff + +#define NPE_FATAL_ERRORS (NPE_LINKRESET | NPE_INTERNALERROR | \ + NPE_BADMESSAGE | NPE_BADDEST | \ + NPE_FIFOOVERFLOW | NPE_CREDITTO_MASK | \ + NPE_TAILTO_MASK) + +/* NI_META_TABLE mask and shift definitions */ + +#define NMT_EXIT_PORT_MASK (UINT64_CAST 0xf) + +/* NI_LOCAL_TABLE mask and shift definitions */ + +#define NLT_EXIT_PORT_MASK (UINT64_CAST 0xf) + +#ifndef __ASSEMBLY__ + +typedef union hubni_port_error_u { + u64 nipe_reg_value; + struct { + u64 nipe_rsvd: 26, /* unused */ + nipe_lnk_reset: 1, /* link reset */ + nipe_intl_err: 1, /* internal error */ + nipe_bad_msg: 1, /* bad message */ + nipe_bad_dest: 1, /* bad dest */ + nipe_fifo_ovfl: 1, /* fifo overflow */ + nipe_rsvd1: 1, /* unused */ + nipe_credit_to: 4, /* credit timeout */ + nipe_tail_to: 4, /* tail timeout */ + nipe_retry_cnt: 8, /* retry error count */ + nipe_cb_cnt: 8, /* checkbit error count */ + nipe_sn_cnt: 8; /* sequence number count */ + } nipe_fields_s; +} hubni_port_error_t; + +#define NI_LLP_RETRY_MAX 0xff +#define NI_LLP_CB_MAX 0xff +#define NI_LLP_SN_MAX 0xff + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_SGI_SN0_HUBNI_H */ diff --git a/arch/mips/include/asm/sn/sn0/hubpi.h b/arch/mips/include/asm/sn/sn0/hubpi.h new file mode 100644 index 000000000000..e39f5f9da040 --- /dev/null +++ b/arch/mips/include/asm/sn/sn0/hubpi.h @@ -0,0 +1,409 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX <sys/SN/SN0/hubpi.h>, revision 1.28. + * + * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_SN_SN0_HUBPI_H +#define _ASM_SN_SN0_HUBPI_H + +#include <linux/types.h> + +/* + * Hub I/O interface registers + * + * All registers in this file are subject to change until Hub chip tapeout. + * All register "addresses" are actually offsets. Use the LOCAL_HUB + * or REMOTE_HUB macros to synthesize an actual address + */ + +#define PI_BASE 0x000000 + +/* General protection and control registers */ + +#define PI_CPU_PROTECT 0x000000 /* CPU Protection */ +#define PI_PROT_OVERRD 0x000008 /* Clear CPU Protection bit */ +#define PI_IO_PROTECT 0x000010 /* Interrupt Pending Protection */ +#define PI_REGION_PRESENT 0x000018 /* Indicates whether region exists */ +#define PI_CPU_NUM 0x000020 /* CPU Number ID */ +#define PI_CALIAS_SIZE 0x000028 /* Cached Alias Size */ +#define PI_MAX_CRB_TIMEOUT 0x000030 /* Maximum Timeout for CRB */ +#define PI_CRB_SFACTOR 0x000038 /* Scale factor for CRB timeout */ + +/* CALIAS values */ +#define PI_CALIAS_SIZE_0 0 +#define PI_CALIAS_SIZE_4K 1 +#define PI_CALIAS_SIZE_8K 2 +#define PI_CALIAS_SIZE_16K 3 +#define PI_CALIAS_SIZE_32K 4 +#define PI_CALIAS_SIZE_64K 5 +#define PI_CALIAS_SIZE_128K 6 +#define PI_CALIAS_SIZE_256K 7 +#define PI_CALIAS_SIZE_512K 8 +#define PI_CALIAS_SIZE_1M 9 +#define PI_CALIAS_SIZE_2M 10 +#define PI_CALIAS_SIZE_4M 11 +#define PI_CALIAS_SIZE_8M 12 +#define PI_CALIAS_SIZE_16M 13 +#define PI_CALIAS_SIZE_32M 14 +#define PI_CALIAS_SIZE_64M 15 + +/* Processor control and status checking */ + +#define PI_CPU_PRESENT_A 0x000040 /* CPU Present A */ +#define PI_CPU_PRESENT_B 0x000048 /* CPU Present B */ +#define PI_CPU_ENABLE_A 0x000050 /* CPU Enable A */ +#define PI_CPU_ENABLE_B 0x000058 /* CPU Enable B */ +#define PI_REPLY_LEVEL 0x000060 /* Reply Level */ +#define PI_HARDRESET_BIT 0x020068 /* Bit cleared by s/w on SR */ +#define PI_NMI_A 0x000070 /* NMI to CPU A */ +#define PI_NMI_B 0x000078 /* NMI to CPU B */ +#define PI_NMI_OFFSET (PI_NMI_B - PI_NMI_A) +#define PI_SOFTRESET 0x000080 /* Softreset (to both CPUs) */ + +/* Regular Interrupt register checking. */ + +#define PI_INT_PEND_MOD 0x000090 /* Write to set pending ints */ +#define PI_INT_PEND0 0x000098 /* Read to get pending ints */ +#define PI_INT_PEND1 0x0000a0 /* Read to get pending ints */ +#define PI_INT_MASK0_A 0x0000a8 /* Interrupt Mask 0 for CPU A */ +#define PI_INT_MASK1_A 0x0000b0 /* Interrupt Mask 1 for CPU A */ +#define PI_INT_MASK0_B 0x0000b8 /* Interrupt Mask 0 for CPU B */ +#define PI_INT_MASK1_B 0x0000c0 /* Interrupt Mask 1 for CPU B */ + +#define PI_INT_MASK_OFFSET 0x10 /* Offset from A to B */ + +/* Crosscall interrupts */ + +#define PI_CC_PEND_SET_A 0x0000c8 /* CC Interrupt Pending Set, CPU A */ +#define PI_CC_PEND_SET_B 0x0000d0 /* CC Interrupt Pending Set, CPU B */ +#define PI_CC_PEND_CLR_A 0x0000d8 /* CC Interrupt Pending Clr, CPU A */ +#define PI_CC_PEND_CLR_B 0x0000e0 /* CC Interrupt Pending Clr, CPU B */ +#define PI_CC_MASK 0x0000e8 /* CC Interrupt mask */ + +#define PI_INT_SET_OFFSET 0x08 /* Offset from A to B */ + +/* Realtime Counter and Profiler control registers */ + +#define PI_RT_COUNT 0x030100 /* Real Time Counter */ +#define PI_RT_COMPARE_A 0x000108 /* Real Time Compare A */ +#define PI_RT_COMPARE_B 0x000110 /* Real Time Compare B */ +#define PI_PROFILE_COMPARE 0x000118 /* L5 int to both cpus when == RTC */ +#define PI_RT_PEND_A 0x000120 /* Set if RT int for A pending */ +#define PI_RT_PEND_B 0x000128 /* Set if RT int for B pending */ +#define PI_PROF_PEND_A 0x000130 /* Set if Prof int for A pending */ +#define PI_PROF_PEND_B 0x000138 /* Set if Prof int for B pending */ +#define PI_RT_EN_A 0x000140 /* RT int for CPU A enable */ +#define PI_RT_EN_B 0x000148 /* RT int for CPU B enable */ +#define PI_PROF_EN_A 0x000150 /* PROF int for CPU A enable */ +#define PI_PROF_EN_B 0x000158 /* PROF int for CPU B enable */ +#define PI_RT_LOCAL_CTRL 0x000160 /* RT control register */ +#define PI_RT_FILTER_CTRL 0x000168 /* GCLK Filter control register */ + +#define PI_COUNT_OFFSET 0x08 /* A to B offset for all counts */ + +/* Built-In Self Test support */ + +#define PI_BIST_WRITE_DATA 0x000200 /* BIST write data */ +#define PI_BIST_READ_DATA 0x000208 /* BIST read data */ +#define PI_BIST_COUNT_TARG 0x000210 /* BIST Count and Target */ +#define PI_BIST_READY 0x000218 /* BIST Ready indicator */ +#define PI_BIST_SHIFT_LOAD 0x000220 /* BIST control */ +#define PI_BIST_SHIFT_UNLOAD 0x000228 /* BIST control */ +#define PI_BIST_ENTER_RUN 0x000230 /* BIST control */ + +/* Graphics control registers */ + +#define PI_GFX_PAGE_A 0x000300 /* Graphics page A */ +#define PI_GFX_CREDIT_CNTR_A 0x000308 /* Graphics credit counter A */ +#define PI_GFX_BIAS_A 0x000310 /* Graphics bias A */ +#define PI_GFX_INT_CNTR_A 0x000318 /* Graphics interrupt counter A */ +#define PI_GFX_INT_CMP_A 0x000320 /* Graphics interrupt comparator A */ +#define PI_GFX_PAGE_B 0x000328 /* Graphics page B */ +#define PI_GFX_CREDIT_CNTR_B 0x000330 /* Graphics credit counter B */ +#define PI_GFX_BIAS_B 0x000338 /* Graphics bias B */ +#define PI_GFX_INT_CNTR_B 0x000340 /* Graphics interrupt counter B */ +#define PI_GFX_INT_CMP_B 0x000348 /* Graphics interrupt comparator B */ + +#define PI_GFX_OFFSET (PI_GFX_PAGE_B - PI_GFX_PAGE_A) +#define PI_GFX_PAGE_ENABLE 0x0000010000000000LL + +/* Error and timeout registers */ +#define PI_ERR_INT_PEND 0x000400 /* Error Interrupt Pending */ +#define PI_ERR_INT_MASK_A 0x000408 /* Error Interrupt mask for CPU A */ +#define PI_ERR_INT_MASK_B 0x000410 /* Error Interrupt mask for CPU B */ +#define PI_ERR_STACK_ADDR_A 0x000418 /* Error stack address for CPU A */ +#define PI_ERR_STACK_ADDR_B 0x000420 /* Error stack address for CPU B */ +#define PI_ERR_STACK_SIZE 0x000428 /* Error Stack Size */ +#define PI_ERR_STATUS0_A 0x000430 /* Error Status 0A */ +#define PI_ERR_STATUS0_A_RCLR 0x000438 /* Error Status 0A clear on read */ +#define PI_ERR_STATUS1_A 0x000440 /* Error Status 1A */ +#define PI_ERR_STATUS1_A_RCLR 0x000448 /* Error Status 1A clear on read */ +#define PI_ERR_STATUS0_B 0x000450 /* Error Status 0B */ +#define PI_ERR_STATUS0_B_RCLR 0x000458 /* Error Status 0B clear on read */ +#define PI_ERR_STATUS1_B 0x000460 /* Error Status 1B */ +#define PI_ERR_STATUS1_B_RCLR 0x000468 /* Error Status 1B clear on read */ +#define PI_SPOOL_CMP_A 0x000470 /* Spool compare for CPU A */ +#define PI_SPOOL_CMP_B 0x000478 /* Spool compare for CPU B */ +#define PI_CRB_TIMEOUT_A 0x000480 /* Timed out CRB entries for A */ +#define PI_CRB_TIMEOUT_B 0x000488 /* Timed out CRB entries for B */ +#define PI_SYSAD_ERRCHK_EN 0x000490 /* Enables SYSAD error checking */ +#define PI_BAD_CHECK_BIT_A 0x000498 /* Force SYSAD check bit error */ +#define PI_BAD_CHECK_BIT_B 0x0004a0 /* Force SYSAD check bit error */ +#define PI_NACK_CNT_A 0x0004a8 /* Consecutive NACK counter */ +#define PI_NACK_CNT_B 0x0004b0 /* " " for CPU B */ +#define PI_NACK_CMP 0x0004b8 /* NACK count compare */ +#define PI_STACKADDR_OFFSET (PI_ERR_STACK_ADDR_B - PI_ERR_STACK_ADDR_A) +#define PI_ERRSTAT_OFFSET (PI_ERR_STATUS0_B - PI_ERR_STATUS0_A) +#define PI_RDCLR_OFFSET (PI_ERR_STATUS0_A_RCLR - PI_ERR_STATUS0_A) + +/* Bits in PI_ERR_INT_PEND */ +#define PI_ERR_SPOOL_CMP_B 0x00000001 /* Spool end hit high water */ +#define PI_ERR_SPOOL_CMP_A 0x00000002 +#define PI_ERR_SPUR_MSG_B 0x00000004 /* Spurious message intr. */ +#define PI_ERR_SPUR_MSG_A 0x00000008 +#define PI_ERR_WRB_TERR_B 0x00000010 /* WRB TERR */ +#define PI_ERR_WRB_TERR_A 0x00000020 +#define PI_ERR_WRB_WERR_B 0x00000040 /* WRB WERR */ +#define PI_ERR_WRB_WERR_A 0x00000080 +#define PI_ERR_SYSSTATE_B 0x00000100 /* SysState parity error */ +#define PI_ERR_SYSSTATE_A 0x00000200 +#define PI_ERR_SYSAD_DATA_B 0x00000400 /* SysAD data parity error */ +#define PI_ERR_SYSAD_DATA_A 0x00000800 +#define PI_ERR_SYSAD_ADDR_B 0x00001000 /* SysAD addr parity error */ +#define PI_ERR_SYSAD_ADDR_A 0x00002000 +#define PI_ERR_SYSCMD_DATA_B 0x00004000 /* SysCmd data parity error */ +#define PI_ERR_SYSCMD_DATA_A 0x00008000 +#define PI_ERR_SYSCMD_ADDR_B 0x00010000 /* SysCmd addr parity error */ +#define PI_ERR_SYSCMD_ADDR_A 0x00020000 +#define PI_ERR_BAD_SPOOL_B 0x00040000 /* Error spooling to memory */ +#define PI_ERR_BAD_SPOOL_A 0x00080000 +#define PI_ERR_UNCAC_UNCORR_B 0x00100000 /* Uncached uncorrectable */ +#define PI_ERR_UNCAC_UNCORR_A 0x00200000 +#define PI_ERR_SYSSTATE_TAG_B 0x00400000 /* SysState tag parity error */ +#define PI_ERR_SYSSTATE_TAG_A 0x00800000 +#define PI_ERR_MD_UNCORR 0x01000000 /* Must be cleared in MD */ + +#define PI_ERR_CLEAR_ALL_A 0x00aaaaaa +#define PI_ERR_CLEAR_ALL_B 0x00555555 + + +/* + * The following three macros define all possible error int pends. + */ + +#define PI_FATAL_ERR_CPU_A (PI_ERR_SYSSTATE_TAG_A | \ + PI_ERR_BAD_SPOOL_A | \ + PI_ERR_SYSCMD_ADDR_A | \ + PI_ERR_SYSCMD_DATA_A | \ + PI_ERR_SYSAD_ADDR_A | \ + PI_ERR_SYSAD_DATA_A | \ + PI_ERR_SYSSTATE_A) + +#define PI_MISC_ERR_CPU_A (PI_ERR_UNCAC_UNCORR_A | \ + PI_ERR_WRB_WERR_A | \ + PI_ERR_WRB_TERR_A | \ + PI_ERR_SPUR_MSG_A | \ + PI_ERR_SPOOL_CMP_A) + +#define PI_FATAL_ERR_CPU_B (PI_ERR_SYSSTATE_TAG_B | \ + PI_ERR_BAD_SPOOL_B | \ + PI_ERR_SYSCMD_ADDR_B | \ + PI_ERR_SYSCMD_DATA_B | \ + PI_ERR_SYSAD_ADDR_B | \ + PI_ERR_SYSAD_DATA_B | \ + PI_ERR_SYSSTATE_B) + +#define PI_MISC_ERR_CPU_B (PI_ERR_UNCAC_UNCORR_B | \ + PI_ERR_WRB_WERR_B | \ + PI_ERR_WRB_TERR_B | \ + PI_ERR_SPUR_MSG_B | \ + PI_ERR_SPOOL_CMP_B) + +#define PI_ERR_GENERIC (PI_ERR_MD_UNCORR) + +/* + * Error types for PI_ERR_STATUS0_[AB] and error stack: + * Use the write types if WRBRRB is 1 else use the read types + */ + +/* Fields in PI_ERR_STATUS0_[AB] */ +#define PI_ERR_ST0_TYPE_MASK 0x0000000000000007 +#define PI_ERR_ST0_TYPE_SHFT 0 +#define PI_ERR_ST0_REQNUM_MASK 0x0000000000000038 +#define PI_ERR_ST0_REQNUM_SHFT 3 +#define PI_ERR_ST0_SUPPL_MASK 0x000000000001ffc0 +#define PI_ERR_ST0_SUPPL_SHFT 6 +#define PI_ERR_ST0_CMD_MASK 0x0000000001fe0000 +#define PI_ERR_ST0_CMD_SHFT 17 +#define PI_ERR_ST0_ADDR_MASK 0x3ffffffffe000000 +#define PI_ERR_ST0_ADDR_SHFT 25 +#define PI_ERR_ST0_OVERRUN_MASK 0x4000000000000000 +#define PI_ERR_ST0_OVERRUN_SHFT 62 +#define PI_ERR_ST0_VALID_MASK 0x8000000000000000 +#define PI_ERR_ST0_VALID_SHFT 63 + +/* Fields in PI_ERR_STATUS1_[AB] */ +#define PI_ERR_ST1_SPOOL_MASK 0x00000000001fffff +#define PI_ERR_ST1_SPOOL_SHFT 0 +#define PI_ERR_ST1_TOUTCNT_MASK 0x000000001fe00000 +#define PI_ERR_ST1_TOUTCNT_SHFT 21 +#define PI_ERR_ST1_INVCNT_MASK 0x0000007fe0000000 +#define PI_ERR_ST1_INVCNT_SHFT 29 +#define PI_ERR_ST1_CRBNUM_MASK 0x0000038000000000 +#define PI_ERR_ST1_CRBNUM_SHFT 39 +#define PI_ERR_ST1_WRBRRB_MASK 0x0000040000000000 +#define PI_ERR_ST1_WRBRRB_SHFT 42 +#define PI_ERR_ST1_CRBSTAT_MASK 0x001ff80000000000 +#define PI_ERR_ST1_CRBSTAT_SHFT 43 +#define PI_ERR_ST1_MSGSRC_MASK 0xffe0000000000000 +#define PI_ERR_ST1_MSGSRC_SHFT 53 + +/* Fields in the error stack */ +#define PI_ERR_STK_TYPE_MASK 0x0000000000000003 +#define PI_ERR_STK_TYPE_SHFT 0 +#define PI_ERR_STK_SUPPL_MASK 0x0000000000000038 +#define PI_ERR_STK_SUPPL_SHFT 3 +#define PI_ERR_STK_REQNUM_MASK 0x00000000000001c0 +#define PI_ERR_STK_REQNUM_SHFT 6 +#define PI_ERR_STK_CRBNUM_MASK 0x0000000000000e00 +#define PI_ERR_STK_CRBNUM_SHFT 9 +#define PI_ERR_STK_WRBRRB_MASK 0x0000000000001000 +#define PI_ERR_STK_WRBRRB_SHFT 12 +#define PI_ERR_STK_CRBSTAT_MASK 0x00000000007fe000 +#define PI_ERR_STK_CRBSTAT_SHFT 13 +#define PI_ERR_STK_CMD_MASK 0x000000007f800000 +#define PI_ERR_STK_CMD_SHFT 23 +#define PI_ERR_STK_ADDR_MASK 0xffffffff80000000 +#define PI_ERR_STK_ADDR_SHFT 31 + +/* Error type in the error status or stack on Read CRBs */ +#define PI_ERR_RD_PRERR 1 +#define PI_ERR_RD_DERR 2 +#define PI_ERR_RD_TERR 3 + +/* Error type in the error status or stack on Write CRBs */ +#define PI_ERR_WR_WERR 0 +#define PI_ERR_WR_PWERR 1 +#define PI_ERR_WR_TERR 3 + +/* Read or Write CRB in error status or stack */ +#define PI_ERR_RRB 0 +#define PI_ERR_WRB 1 +#define PI_ERR_ANY_CRB 2 + +/* Address masks in the error status and error stack are not the same */ +#define ERR_STK_ADDR_SHFT 7 +#define ERR_STAT0_ADDR_SHFT 3 + +#define PI_MIN_STACK_SIZE 4096 /* For figuring out the size to set */ +#define PI_STACK_SIZE_SHFT 12 /* 4k */ + +#define ERR_STACK_SIZE_BYTES(_sz) \ + ((_sz) ? (PI_MIN_STACK_SIZE << ((_sz) - 1)) : 0) + +#ifndef __ASSEMBLY__ +/* + * format of error stack and error status registers. + */ + +struct err_stack_format { + u64 sk_addr : 33, /* address */ + sk_cmd : 8, /* message command */ + sk_crb_sts : 10, /* status from RRB or WRB */ + sk_rw_rb : 1, /* RRB == 0, WRB == 1 */ + sk_crb_num : 3, /* WRB (0 to 7) or RRB (0 to 4) */ + sk_t5_req : 3, /* RRB T5 request number */ + sk_suppl : 3, /* lowest 3 bit of supplemental */ + sk_err_type: 3; /* error type */ +}; + +typedef union pi_err_stack { + u64 pi_stk_word; + struct err_stack_format pi_stk_fmt; +} pi_err_stack_t; + +struct err_status0_format { + u64 s0_valid : 1, /* Valid */ + s0_ovr_run : 1, /* Overrun, spooled to memory */ + s0_addr : 37, /* address */ + s0_cmd : 8, /* message command */ + s0_supl : 11, /* message supplemental field */ + s0_t5_req : 3, /* RRB T5 request number */ + s0_err_type: 3; /* error type */ +}; + +typedef union pi_err_stat0 { + u64 pi_stat0_word; + struct err_status0_format pi_stat0_fmt; +} pi_err_stat0_t; + +struct err_status1_format { + u64 s1_src : 11, /* message source */ + s1_crb_sts : 10, /* status from RRB or WRB */ + s1_rw_rb : 1, /* RRB == 0, WRB == 1 */ + s1_crb_num : 3, /* WRB (0 to 7) or RRB (0 to 4) */ + s1_inval_cnt:10, /* signed invalidate counter RRB */ + s1_to_cnt : 8, /* crb timeout counter */ + s1_spl_cnt : 21; /* number spooled to memory */ +}; + +typedef union pi_err_stat1 { + u64 pi_stat1_word; + struct err_status1_format pi_stat1_fmt; +} pi_err_stat1_t; + +typedef u64 rtc_time_t; + +#endif /* !__ASSEMBLY__ */ + + +/* Bits in PI_SYSAD_ERRCHK_EN */ +#define PI_SYSAD_ERRCHK_ECCGEN 0x01 /* Enable ECC generation */ +#define PI_SYSAD_ERRCHK_QUALGEN 0x02 /* Enable data quality signal gen. */ +#define PI_SYSAD_ERRCHK_SADP 0x04 /* Enable SysAD parity checking */ +#define PI_SYSAD_ERRCHK_CMDP 0x08 /* Enable SysCmd parity checking */ +#define PI_SYSAD_ERRCHK_STATE 0x10 /* Enable SysState parity checking */ +#define PI_SYSAD_ERRCHK_QUAL 0x20 /* Enable data quality checking */ +#define PI_SYSAD_CHECK_ALL 0x3f /* Generate and check all signals. */ + +/* Interrupt pending bits on R10000 */ + +#define HUB_IP_PEND0 0x0400 +#define HUB_IP_PEND1_CC 0x0800 +#define HUB_IP_RT 0x1000 +#define HUB_IP_PROF 0x2000 +#define HUB_IP_ERROR 0x4000 +#define HUB_IP_MASK 0x7c00 + +/* PI_RT_LOCAL_CTRL mask and shift definitions */ + +#define PRLC_USE_INT_SHFT 16 +#define PRLC_USE_INT_MASK (UINT64_CAST 1 << 16) +#define PRLC_USE_INT (UINT64_CAST 1 << 16) +#define PRLC_GCLK_SHFT 15 +#define PRLC_GCLK_MASK (UINT64_CAST 1 << 15) +#define PRLC_GCLK (UINT64_CAST 1 << 15) +#define PRLC_GCLK_COUNT_SHFT 8 +#define PRLC_GCLK_COUNT_MASK (UINT64_CAST 0x7f << 8) +#define PRLC_MAX_COUNT_SHFT 1 +#define PRLC_MAX_COUNT_MASK (UINT64_CAST 0x7f << 1) +#define PRLC_GCLK_EN_SHFT 0 +#define PRLC_GCLK_EN_MASK (UINT64_CAST 1) +#define PRLC_GCLK_EN (UINT64_CAST 1) + +/* PI_RT_FILTER_CTRL mask and shift definitions */ + +/* + * Bits for NACK_CNT_A/B and NACK_CMP + */ +#define PI_NACK_CNT_EN_SHFT 20 +#define PI_NACK_CNT_EN_MASK 0x100000 +#define PI_NACK_CNT_MASK 0x0fffff +#define PI_NACK_CNT_MAX 0x0fffff + +#endif /* _ASM_SN_SN0_HUBPI_H */ diff --git a/arch/mips/include/asm/sn/sn0/ip27.h b/arch/mips/include/asm/sn/sn0/ip27.h new file mode 100644 index 000000000000..3c97e0855c8d --- /dev/null +++ b/arch/mips/include/asm/sn/sn0/ip27.h @@ -0,0 +1,85 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX <sys/SN/SN0/IP27.h>. + * + * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. + * Copyright (C) 1999, 2006 by Ralf Baechle + */ +#ifndef _ASM_SN_SN0_IP27_H +#define _ASM_SN_SN0_IP27_H + +#include <asm/mipsregs.h> + +/* + * Simple definitions for the masks which remove SW bits from pte. + */ + +#define TLBLO_HWBITSHIFT 0 /* Shift value, for masking */ + +#ifndef __ASSEMBLY__ + +#define CAUSE_BERRINTR IE_IRQ5 + +#define ECCF_CACHE_ERR 0 +#define ECCF_TAGLO 1 +#define ECCF_ECC 2 +#define ECCF_ERROREPC 3 +#define ECCF_PADDR 4 +#define ECCF_SIZE (5 * sizeof(long)) + +#endif /* !__ASSEMBLY__ */ + +#ifdef __ASSEMBLY__ + +/* + * KL_GET_CPUNUM (similar to EV_GET_SPNUM for EVEREST platform) reads + * the processor number of the calling processor. The proc parameters + * must be a register. + */ +#define KL_GET_CPUNUM(proc) \ + dli proc, LOCAL_HUB(0); \ + ld proc, PI_CPU_NUM(proc) + +#endif /* __ASSEMBLY__ */ + +/* + * R10000 status register interrupt bit mask usage for IP27. + */ +#define SRB_SWTIMO IE_SW0 /* 0x0100 */ +#define SRB_NET IE_SW1 /* 0x0200 */ +#define SRB_DEV0 IE_IRQ0 /* 0x0400 */ +#define SRB_DEV1 IE_IRQ1 /* 0x0800 */ +#define SRB_TIMOCLK IE_IRQ2 /* 0x1000 */ +#define SRB_PROFCLK IE_IRQ3 /* 0x2000 */ +#define SRB_ERR IE_IRQ4 /* 0x4000 */ +#define SRB_SCHEDCLK IE_IRQ5 /* 0x8000 */ + +#define SR_IBIT_HI SRB_DEV0 +#define SR_IBIT_PROF SRB_PROFCLK + +#define SRB_SWTIMO_IDX 0 +#define SRB_NET_IDX 1 +#define SRB_DEV0_IDX 2 +#define SRB_DEV1_IDX 3 +#define SRB_TIMOCLK_IDX 4 +#define SRB_PROFCLK_IDX 5 +#define SRB_ERR_IDX 6 +#define SRB_SCHEDCLK_IDX 7 + +#define NUM_CAUSE_INTRS 8 + +#define SCACHE_LINESIZE 128 +#define SCACHE_LINEMASK (SCACHE_LINESIZE - 1) + +#include <asm/sn/addrs.h> + +#define LED_CYCLE_MASK 0x0f +#define LED_CYCLE_SHFT 4 + +#define SEND_NMI(_nasid, _slice) \ + REMOTE_HUB_S((_nasid), (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1) + +#endif /* _ASM_SN_SN0_IP27_H */ diff --git a/arch/mips/include/asm/sn/sn_private.h b/arch/mips/include/asm/sn/sn_private.h new file mode 100644 index 000000000000..1a2c3025bf28 --- /dev/null +++ b/arch/mips/include/asm/sn/sn_private.h @@ -0,0 +1,19 @@ +#ifndef __ASM_SN_SN_PRIVATE_H +#define __ASM_SN_SN_PRIVATE_H + +#include <asm/sn/types.h> + +extern nasid_t master_nasid; + +extern void cpu_node_probe(void); +extern cnodeid_t get_compact_nodeid(void); +extern void hub_rtc_init(cnodeid_t); +extern void cpu_time_init(void); +extern void per_cpu_init(void); +extern void install_cpu_nmi_handler(int slice); +extern void install_ipi(void); +extern void setup_replication_mask(void); +extern void replicate_kernel_text(void); +extern pfn_t node_getfirstfree(cnodeid_t); + +#endif /* __ASM_SN_SN_PRIVATE_H */ diff --git a/arch/mips/include/asm/sn/types.h b/arch/mips/include/asm/sn/types.h new file mode 100644 index 000000000000..74d0bb260b86 --- /dev/null +++ b/arch/mips/include/asm/sn/types.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_SN_TYPES_H +#define _ASM_SN_TYPES_H + +#include <linux/types.h> + +typedef unsigned long cpuid_t; +typedef unsigned long cnodemask_t; +typedef signed short nasid_t; /* node id in numa-as-id space */ +typedef signed short cnodeid_t; /* node id in compact-id space */ +typedef signed char partid_t; /* partition ID type */ +typedef signed short moduleid_t; /* user-visible module number type */ +typedef signed short cmoduleid_t; /* kernel compact module id type */ +typedef unsigned char clusterid_t; /* Clusterid of the cell */ +typedef unsigned long pfn_t; + +typedef dev_t vertex_hdl_t; /* hardware graph vertex handle */ + +#endif /* _ASM_SN_TYPES_H */ diff --git a/arch/mips/include/asm/sni.h b/arch/mips/include/asm/sni.h new file mode 100644 index 000000000000..8c1eb02c6d16 --- /dev/null +++ b/arch/mips/include/asm/sni.h @@ -0,0 +1,244 @@ +/* + * SNI specific definitions + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997, 1998 by Ralf Baechle + * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de) + */ +#ifndef __ASM_SNI_H +#define __ASM_SNI_H + +extern unsigned int sni_brd_type; + +#define SNI_BRD_10 2 +#define SNI_BRD_10NEW 3 +#define SNI_BRD_TOWER_OASIC 4 +#define SNI_BRD_MINITOWER 5 +#define SNI_BRD_PCI_TOWER 6 +#define SNI_BRD_RM200 7 +#define SNI_BRD_PCI_MTOWER 8 +#define SNI_BRD_PCI_DESKTOP 9 +#define SNI_BRD_PCI_TOWER_CPLUS 10 +#define SNI_BRD_PCI_MTOWER_CPLUS 11 + +/* RM400 cpu types */ +#define SNI_CPU_M8021 0x01 +#define SNI_CPU_M8030 0x04 +#define SNI_CPU_M8031 0x06 +#define SNI_CPU_M8034 0x0f +#define SNI_CPU_M8037 0x07 +#define SNI_CPU_M8040 0x05 +#define SNI_CPU_M8043 0x09 +#define SNI_CPU_M8050 0x0b +#define SNI_CPU_M8053 0x0d + +#define SNI_PORT_BASE CKSEG1ADDR(0xb4000000) + +#ifndef __MIPSEL__ +/* + * ASIC PCI registers for big endian configuration. + */ +#define PCIMT_UCONF CKSEG1ADDR(0xbfff0004) +#define PCIMT_IOADTIMEOUT2 CKSEG1ADDR(0xbfff000c) +#define PCIMT_IOMEMCONF CKSEG1ADDR(0xbfff0014) +#define PCIMT_IOMMU CKSEG1ADDR(0xbfff001c) +#define PCIMT_IOADTIMEOUT1 CKSEG1ADDR(0xbfff0024) +#define PCIMT_DMAACCESS CKSEG1ADDR(0xbfff002c) +#define PCIMT_DMAHIT CKSEG1ADDR(0xbfff0034) +#define PCIMT_ERRSTATUS CKSEG1ADDR(0xbfff003c) +#define PCIMT_ERRADDR CKSEG1ADDR(0xbfff0044) +#define PCIMT_SYNDROME CKSEG1ADDR(0xbfff004c) +#define PCIMT_ITPEND CKSEG1ADDR(0xbfff0054) +#define IT_INT2 0x01 +#define IT_INTD 0x02 +#define IT_INTC 0x04 +#define IT_INTB 0x08 +#define IT_INTA 0x10 +#define IT_EISA 0x20 +#define IT_SCSI 0x40 +#define IT_ETH 0x80 +#define PCIMT_IRQSEL CKSEG1ADDR(0xbfff005c) +#define PCIMT_TESTMEM CKSEG1ADDR(0xbfff0064) +#define PCIMT_ECCREG CKSEG1ADDR(0xbfff006c) +#define PCIMT_CONFIG_ADDRESS CKSEG1ADDR(0xbfff0074) +#define PCIMT_ASIC_ID CKSEG1ADDR(0xbfff007c) /* read */ +#define PCIMT_SOFT_RESET CKSEG1ADDR(0xbfff007c) /* write */ +#define PCIMT_PIA_OE CKSEG1ADDR(0xbfff0084) +#define PCIMT_PIA_DATAOUT CKSEG1ADDR(0xbfff008c) +#define PCIMT_PIA_DATAIN CKSEG1ADDR(0xbfff0094) +#define PCIMT_CACHECONF CKSEG1ADDR(0xbfff009c) +#define PCIMT_INVSPACE CKSEG1ADDR(0xbfff00a4) +#else +/* + * ASIC PCI registers for little endian configuration. + */ +#define PCIMT_UCONF CKSEG1ADDR(0xbfff0000) +#define PCIMT_IOADTIMEOUT2 CKSEG1ADDR(0xbfff0008) +#define PCIMT_IOMEMCONF CKSEG1ADDR(0xbfff0010) +#define PCIMT_IOMMU CKSEG1ADDR(0xbfff0018) +#define PCIMT_IOADTIMEOUT1 CKSEG1ADDR(0xbfff0020) +#define PCIMT_DMAACCESS CKSEG1ADDR(0xbfff0028) +#define PCIMT_DMAHIT CKSEG1ADDR(0xbfff0030) +#define PCIMT_ERRSTATUS CKSEG1ADDR(0xbfff0038) +#define PCIMT_ERRADDR CKSEG1ADDR(0xbfff0040) +#define PCIMT_SYNDROME CKSEG1ADDR(0xbfff0048) +#define PCIMT_ITPEND CKSEG1ADDR(0xbfff0050) +#define IT_INT2 0x01 +#define IT_INTD 0x02 +#define IT_INTC 0x04 +#define IT_INTB 0x08 +#define IT_INTA 0x10 +#define IT_EISA 0x20 +#define IT_SCSI 0x40 +#define IT_ETH 0x80 +#define PCIMT_IRQSEL CKSEG1ADDR(0xbfff0058) +#define PCIMT_TESTMEM CKSEG1ADDR(0xbfff0060) +#define PCIMT_ECCREG CKSEG1ADDR(0xbfff0068) +#define PCIMT_CONFIG_ADDRESS CKSEG1ADDR(0xbfff0070) +#define PCIMT_ASIC_ID CKSEG1ADDR(0xbfff0078) /* read */ +#define PCIMT_SOFT_RESET CKSEG1ADDR(0xbfff0078) /* write */ +#define PCIMT_PIA_OE CKSEG1ADDR(0xbfff0080) +#define PCIMT_PIA_DATAOUT CKSEG1ADDR(0xbfff0088) +#define PCIMT_PIA_DATAIN CKSEG1ADDR(0xbfff0090) +#define PCIMT_CACHECONF CKSEG1ADDR(0xbfff0098) +#define PCIMT_INVSPACE CKSEG1ADDR(0xbfff00a0) +#endif + +#define PCIMT_PCI_CONF CKSEG1ADDR(0xbfff0100) + +/* + * Data port for the PCI bus in IO space + */ +#define PCIMT_CONFIG_DATA 0x0cfc + +/* + * Board specific registers + */ +#define PCIMT_CSMSR CKSEG1ADDR(0xbfd00000) +#define PCIMT_CSSWITCH CKSEG1ADDR(0xbfd10000) +#define PCIMT_CSITPEND CKSEG1ADDR(0xbfd20000) +#define PCIMT_AUTO_PO_EN CKSEG1ADDR(0xbfd30000) +#define PCIMT_CLR_TEMP CKSEG1ADDR(0xbfd40000) +#define PCIMT_AUTO_PO_DIS CKSEG1ADDR(0xbfd50000) +#define PCIMT_EXMSR CKSEG1ADDR(0xbfd60000) +#define PCIMT_UNUSED1 CKSEG1ADDR(0xbfd70000) +#define PCIMT_CSWCSM CKSEG1ADDR(0xbfd80000) +#define PCIMT_UNUSED2 CKSEG1ADDR(0xbfd90000) +#define PCIMT_CSLED CKSEG1ADDR(0xbfda0000) +#define PCIMT_CSMAPISA CKSEG1ADDR(0xbfdb0000) +#define PCIMT_CSRSTBP CKSEG1ADDR(0xbfdc0000) +#define PCIMT_CLRPOFF CKSEG1ADDR(0xbfdd0000) +#define PCIMT_CSTIMER CKSEG1ADDR(0xbfde0000) +#define PCIMT_PWDN CKSEG1ADDR(0xbfdf0000) + +/* + * A20R based boards + */ +#define A20R_PT_CLOCK_BASE CKSEG1ADDR(0xbc040000) +#define A20R_PT_TIM0_ACK CKSEG1ADDR(0xbc050000) +#define A20R_PT_TIM1_ACK CKSEG1ADDR(0xbc060000) + +#define SNI_A20R_IRQ_BASE MIPS_CPU_IRQ_BASE +#define SNI_A20R_IRQ_TIMER (SNI_A20R_IRQ_BASE+5) + +#define SNI_PCIT_INT_REG CKSEG1ADDR(0xbfff000c) + +#define SNI_PCIT_INT_START 24 +#define SNI_PCIT_INT_END 30 + +#define PCIT_IRQ_ETHERNET (MIPS_CPU_IRQ_BASE + 5) +#define PCIT_IRQ_INTA (SNI_PCIT_INT_START + 0) +#define PCIT_IRQ_INTB (SNI_PCIT_INT_START + 1) +#define PCIT_IRQ_INTC (SNI_PCIT_INT_START + 2) +#define PCIT_IRQ_INTD (SNI_PCIT_INT_START + 3) +#define PCIT_IRQ_SCSI0 (SNI_PCIT_INT_START + 4) +#define PCIT_IRQ_SCSI1 (SNI_PCIT_INT_START + 5) + + +/* + * Interrupt 0-16 are EISA interrupts. Interrupts from 16 on are assigned + * to the other interrupts generated by ASIC PCI. + * + * INT2 is a wired-or of the push button interrupt, high temperature interrupt + * ASIC PCI interrupt. + */ +#define PCIMT_KEYBOARD_IRQ 1 +#define PCIMT_IRQ_INT2 24 +#define PCIMT_IRQ_INTD 25 +#define PCIMT_IRQ_INTC 26 +#define PCIMT_IRQ_INTB 27 +#define PCIMT_IRQ_INTA 28 +#define PCIMT_IRQ_EISA 29 +#define PCIMT_IRQ_SCSI 30 + +#define PCIMT_IRQ_ETHERNET (MIPS_CPU_IRQ_BASE+6) + +#if 0 +#define PCIMT_IRQ_TEMPERATURE 24 +#define PCIMT_IRQ_EISA_NMI 25 +#define PCIMT_IRQ_POWER_OFF 26 +#define PCIMT_IRQ_BUTTON 27 +#endif + +/* + * Base address for the mapped 16mb EISA bus segment. + */ +#define PCIMT_EISA_BASE CKSEG1ADDR(0xb0000000) + +/* PCI EISA Interrupt acknowledge */ +#define PCIMT_INT_ACKNOWLEDGE CKSEG1ADDR(0xba000000) + +/* + * SNI ID PROM + * + * SNI_IDPROM_MEMSIZE Memsize in 16MB quantities + * SNI_IDPROM_BRDTYPE Board Type + * SNI_IDPROM_CPUTYPE CPU Type on RM400 + */ +#ifdef CONFIG_CPU_BIG_ENDIAN +#define __SNI_END 0 +#endif +#ifdef CONFIG_CPU_LITTLE_ENDIAN +#define __SNI_END 3 +#endif +#define SNI_IDPROM_BASE CKSEG1ADDR(0x1ff00000) +#define SNI_IDPROM_MEMSIZE (SNI_IDPROM_BASE + (0x28 ^ __SNI_END)) +#define SNI_IDPROM_BRDTYPE (SNI_IDPROM_BASE + (0x29 ^ __SNI_END)) +#define SNI_IDPROM_CPUTYPE (SNI_IDPROM_BASE + (0x30 ^ __SNI_END)) + +#define SNI_IDPROM_SIZE 0x1000 + +/* board specific init functions */ +extern void sni_a20r_init(void); +extern void sni_pcit_init(void); +extern void sni_rm200_init(void); +extern void sni_pcimt_init(void); + +/* board specific irq init functions */ +extern void sni_a20r_irq_init(void); +extern void sni_pcit_irq_init(void); +extern void sni_pcit_cplus_irq_init(void); +extern void sni_rm200_irq_init(void); +extern void sni_pcimt_irq_init(void); + +/* timer inits */ +extern void sni_cpu_time_init(void); + +/* eisa init for RM200/400 */ +#ifdef CONFIG_EISA +extern int sni_eisa_root_init(void); +#else +static inline int sni_eisa_root_init(void) +{ + return 0; +} +#endif + +/* common irq stuff */ +extern void (*sni_hwint)(void); +extern struct irqaction sni_isa_irq; + +#endif /* __ASM_SNI_H */ diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h new file mode 100644 index 000000000000..facc2d7a87ca --- /dev/null +++ b/arch/mips/include/asm/socket.h @@ -0,0 +1,117 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997, 1999, 2000, 2001 Ralf Baechle + * Copyright (C) 2000, 2001 Silicon Graphics, Inc. + */ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include <asm/sockios.h> + +/* + * For setsockopt(2) + * + * This defines are ABI conformant as far as Linux supports these ... + */ +#define SOL_SOCKET 0xffff + +#define SO_DEBUG 0x0001 /* Record debugging information. */ +#define SO_REUSEADDR 0x0004 /* Allow reuse of local addresses. */ +#define SO_KEEPALIVE 0x0008 /* Keep connections alive and send + SIGPIPE when they die. */ +#define SO_DONTROUTE 0x0010 /* Don't do local routing. */ +#define SO_BROADCAST 0x0020 /* Allow transmission of + broadcast messages. */ +#define SO_LINGER 0x0080 /* Block on close of a reliable + socket to transmit pending data. */ +#define SO_OOBINLINE 0x0100 /* Receive out-of-band data in-band. */ +#if 0 +To add: #define SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */ +#endif + +#define SO_TYPE 0x1008 /* Compatible name for SO_STYLE. */ +#define SO_STYLE SO_TYPE /* Synonym */ +#define SO_ERROR 0x1007 /* get error status and clear */ +#define SO_SNDBUF 0x1001 /* Send buffer size. */ +#define SO_RCVBUF 0x1002 /* Receive buffer. */ +#define SO_SNDLOWAT 0x1003 /* send low-water mark */ +#define SO_RCVLOWAT 0x1004 /* receive low-water mark */ +#define SO_SNDTIMEO 0x1005 /* send timeout */ +#define SO_RCVTIMEO 0x1006 /* receive timeout */ +#define SO_ACCEPTCONN 0x1009 + +/* linux-specific, might as well be the same as on i386 */ +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_BSDCOMPAT 14 + +#define SO_PASSCRED 17 +#define SO_PEERCRED 18 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_PEERSEC 30 +#define SO_SNDBUFFORCE 31 +#define SO_RCVBUFFORCE 33 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#ifdef __KERNEL__ + +/** sock_type - Socket types + * + * Please notice that for binary compat reasons MIPS has to + * override the enum sock_type in include/linux/net.h, so + * we define ARCH_HAS_SOCKET_TYPES here. + * + * @SOCK_DGRAM - datagram (conn.less) socket + * @SOCK_STREAM - stream (connection) socket + * @SOCK_RAW - raw socket + * @SOCK_RDM - reliably-delivered message + * @SOCK_SEQPACKET - sequential packet socket + * @SOCK_PACKET - linux specific way of getting packets at the dev level. + * For writing rarp and other similar things on the user level. + */ +enum sock_type { + SOCK_DGRAM = 1, + SOCK_STREAM = 2, + SOCK_RAW = 3, + SOCK_RDM = 4, + SOCK_SEQPACKET = 5, + SOCK_DCCP = 6, + SOCK_PACKET = 10, +}; + +#define SOCK_MAX (SOCK_PACKET + 1) +/* Mask which covers at least up to SOCK_MASK-1. The + * * remaining bits are used as flags. */ +#define SOCK_TYPE_MASK 0xf + +/* Flags for socket, socketpair, paccept */ +#define SOCK_CLOEXEC O_CLOEXEC +#define SOCK_NONBLOCK O_NONBLOCK + +#define ARCH_HAS_SOCKET_TYPES 1 + +#endif /* __KERNEL__ */ + +#endif /* _ASM_SOCKET_H */ diff --git a/arch/mips/include/asm/sockios.h b/arch/mips/include/asm/sockios.h new file mode 100644 index 000000000000..ed1a5f78d22f --- /dev/null +++ b/arch/mips/include/asm/sockios.h @@ -0,0 +1,26 @@ +/* + * Socket-level I/O control calls. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 by Ralf Baechle + */ +#ifndef _ASM_SOCKIOS_H +#define _ASM_SOCKIOS_H + +#include <asm/ioctl.h> + +/* Socket-level I/O control calls. */ +#define FIOGETOWN _IOR('f', 123, int) +#define FIOSETOWN _IOW('f', 124, int) + +#define SIOCATMARK _IOR('s', 7, int) +#define SIOCSPGRP _IOW('s', 8, pid_t) +#define SIOCGPGRP _IOR('s', 9, pid_t) + +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _ASM_SOCKIOS_H */ diff --git a/arch/mips/include/asm/sparsemem.h b/arch/mips/include/asm/sparsemem.h new file mode 100644 index 000000000000..795ac6c23203 --- /dev/null +++ b/arch/mips/include/asm/sparsemem.h @@ -0,0 +1,14 @@ +#ifndef _MIPS_SPARSEMEM_H +#define _MIPS_SPARSEMEM_H +#ifdef CONFIG_SPARSEMEM + +/* + * SECTION_SIZE_BITS 2^N: how big each section will be + * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space + */ +#define SECTION_SIZE_BITS 28 +#define MAX_PHYSMEM_BITS 35 + +#endif /* CONFIG_SPARSEMEM */ +#endif /* _MIPS_SPARSEMEM_H */ + diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h new file mode 100644 index 000000000000..5d98a3cb85b7 --- /dev/null +++ b/arch/mips/include/asm/spinlock.h @@ -0,0 +1,487 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999, 2000, 06 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_SPINLOCK_H +#define _ASM_SPINLOCK_H + +#include <linux/compiler.h> + +#include <asm/barrier.h> +#include <asm/war.h> + +/* + * Your basic SMP spinlocks, allowing only a single CPU anywhere + * + * Simple spin lock operations. There are two variants, one clears IRQ's + * on the local processor, one does not. + * + * These are fair FIFO ticket locks + * + * (the type definitions are in asm/spinlock_types.h) + */ + + +/* + * Ticket locks are conceptually two parts, one indicating the current head of + * the queue, and the other indicating the current tail. The lock is acquired + * by atomically noting the tail and incrementing it by one (thus adding + * ourself to the queue and noting our position), then waiting until the head + * becomes equal to the the initial value of the tail. + */ + +static inline int __raw_spin_is_locked(raw_spinlock_t *lock) +{ + unsigned int counters = ACCESS_ONCE(lock->lock); + + return ((counters >> 14) ^ counters) & 0x1fff; +} + +#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) +#define __raw_spin_unlock_wait(x) \ + while (__raw_spin_is_locked(x)) { cpu_relax(); } + +static inline int __raw_spin_is_contended(raw_spinlock_t *lock) +{ + unsigned int counters = ACCESS_ONCE(lock->lock); + + return (((counters >> 14) - counters) & 0x1fff) > 1; +} + +static inline void __raw_spin_lock(raw_spinlock_t *lock) +{ + int my_ticket; + int tmp; + + if (R10000_LLSC_WAR) { + __asm__ __volatile__ ( + " .set push # __raw_spin_lock \n" + " .set noreorder \n" + " \n" + "1: ll %[ticket], %[ticket_ptr] \n" + " addiu %[my_ticket], %[ticket], 0x4000 \n" + " sc %[my_ticket], %[ticket_ptr] \n" + " beqzl %[my_ticket], 1b \n" + " nop \n" + " srl %[my_ticket], %[ticket], 14 \n" + " andi %[my_ticket], %[my_ticket], 0x1fff \n" + " andi %[ticket], %[ticket], 0x1fff \n" + " bne %[ticket], %[my_ticket], 4f \n" + " subu %[ticket], %[my_ticket], %[ticket] \n" + "2: \n" + " .subsection 2 \n" + "4: andi %[ticket], %[ticket], 0x1fff \n" + "5: sll %[ticket], 5 \n" + " \n" + "6: bnez %[ticket], 6b \n" + " subu %[ticket], 1 \n" + " \n" + " lw %[ticket], %[ticket_ptr] \n" + " andi %[ticket], %[ticket], 0x1fff \n" + " beq %[ticket], %[my_ticket], 2b \n" + " subu %[ticket], %[my_ticket], %[ticket] \n" + " b 5b \n" + " subu %[ticket], %[ticket], 1 \n" + " .previous \n" + " .set pop \n" + : [ticket_ptr] "+m" (lock->lock), + [ticket] "=&r" (tmp), + [my_ticket] "=&r" (my_ticket)); + } else { + __asm__ __volatile__ ( + " .set push # __raw_spin_lock \n" + " .set noreorder \n" + " \n" + " ll %[ticket], %[ticket_ptr] \n" + "1: addiu %[my_ticket], %[ticket], 0x4000 \n" + " sc %[my_ticket], %[ticket_ptr] \n" + " beqz %[my_ticket], 3f \n" + " nop \n" + " srl %[my_ticket], %[ticket], 14 \n" + " andi %[my_ticket], %[my_ticket], 0x1fff \n" + " andi %[ticket], %[ticket], 0x1fff \n" + " bne %[ticket], %[my_ticket], 4f \n" + " subu %[ticket], %[my_ticket], %[ticket] \n" + "2: \n" + " .subsection 2 \n" + "3: b 1b \n" + " ll %[ticket], %[ticket_ptr] \n" + " \n" + "4: andi %[ticket], %[ticket], 0x1fff \n" + "5: sll %[ticket], 5 \n" + " \n" + "6: bnez %[ticket], 6b \n" + " subu %[ticket], 1 \n" + " \n" + " lw %[ticket], %[ticket_ptr] \n" + " andi %[ticket], %[ticket], 0x1fff \n" + " beq %[ticket], %[my_ticket], 2b \n" + " subu %[ticket], %[my_ticket], %[ticket] \n" + " b 5b \n" + " subu %[ticket], %[ticket], 1 \n" + " .previous \n" + " .set pop \n" + : [ticket_ptr] "+m" (lock->lock), + [ticket] "=&r" (tmp), + [my_ticket] "=&r" (my_ticket)); + } + + smp_llsc_mb(); +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lock) +{ + int tmp; + + smp_llsc_mb(); + + if (R10000_LLSC_WAR) { + __asm__ __volatile__ ( + " # __raw_spin_unlock \n" + "1: ll %[ticket], %[ticket_ptr] \n" + " addiu %[ticket], %[ticket], 1 \n" + " ori %[ticket], %[ticket], 0x2000 \n" + " xori %[ticket], %[ticket], 0x2000 \n" + " sc %[ticket], %[ticket_ptr] \n" + " beqzl %[ticket], 2f \n" + : [ticket_ptr] "+m" (lock->lock), + [ticket] "=&r" (tmp)); + } else { + __asm__ __volatile__ ( + " .set push # __raw_spin_unlock \n" + " .set noreorder \n" + " \n" + " ll %[ticket], %[ticket_ptr] \n" + "1: addiu %[ticket], %[ticket], 1 \n" + " ori %[ticket], %[ticket], 0x2000 \n" + " xori %[ticket], %[ticket], 0x2000 \n" + " sc %[ticket], %[ticket_ptr] \n" + " beqz %[ticket], 2f \n" + " nop \n" + " \n" + " .subsection 2 \n" + "2: b 1b \n" + " ll %[ticket], %[ticket_ptr] \n" + " .previous \n" + " .set pop \n" + : [ticket_ptr] "+m" (lock->lock), + [ticket] "=&r" (tmp)); + } +} + +static inline unsigned int __raw_spin_trylock(raw_spinlock_t *lock) +{ + int tmp, tmp2, tmp3; + + if (R10000_LLSC_WAR) { + __asm__ __volatile__ ( + " .set push # __raw_spin_trylock \n" + " .set noreorder \n" + " \n" + "1: ll %[ticket], %[ticket_ptr] \n" + " srl %[my_ticket], %[ticket], 14 \n" + " andi %[my_ticket], %[my_ticket], 0x1fff \n" + " andi %[now_serving], %[ticket], 0x1fff \n" + " bne %[my_ticket], %[now_serving], 3f \n" + " addiu %[ticket], %[ticket], 0x4000 \n" + " sc %[ticket], %[ticket_ptr] \n" + " beqzl %[ticket], 1b \n" + " li %[ticket], 1 \n" + "2: \n" + " .subsection 2 \n" + "3: b 2b \n" + " li %[ticket], 0 \n" + " .previous \n" + " .set pop \n" + : [ticket_ptr] "+m" (lock->lock), + [ticket] "=&r" (tmp), + [my_ticket] "=&r" (tmp2), + [now_serving] "=&r" (tmp3)); + } else { + __asm__ __volatile__ ( + " .set push # __raw_spin_trylock \n" + " .set noreorder \n" + " \n" + " ll %[ticket], %[ticket_ptr] \n" + "1: srl %[my_ticket], %[ticket], 14 \n" + " andi %[my_ticket], %[my_ticket], 0x1fff \n" + " andi %[now_serving], %[ticket], 0x1fff \n" + " bne %[my_ticket], %[now_serving], 3f \n" + " addiu %[ticket], %[ticket], 0x4000 \n" + " sc %[ticket], %[ticket_ptr] \n" + " beqz %[ticket], 4f \n" + " li %[ticket], 1 \n" + "2: \n" + " .subsection 2 \n" + "3: b 2b \n" + " li %[ticket], 0 \n" + "4: b 1b \n" + " ll %[ticket], %[ticket_ptr] \n" + " .previous \n" + " .set pop \n" + : [ticket_ptr] "+m" (lock->lock), + [ticket] "=&r" (tmp), + [my_ticket] "=&r" (tmp2), + [now_serving] "=&r" (tmp3)); + } + + smp_llsc_mb(); + + return tmp; +} + +/* + * Read-write spinlocks, allowing multiple readers but only one writer. + * + * NOTE! it is quite common to have readers in interrupts but no interrupt + * writers. For those circumstances we can "mix" irq-safe locks - any writer + * needs to get a irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + */ + +/* + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_read_can_lock(rw) ((rw)->lock >= 0) + +/* + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_write_can_lock(rw) (!(rw)->lock) + +static inline void __raw_read_lock(raw_rwlock_t *rw) +{ + unsigned int tmp; + + if (R10000_LLSC_WAR) { + __asm__ __volatile__( + " .set noreorder # __raw_read_lock \n" + "1: ll %1, %2 \n" + " bltz %1, 1b \n" + " addu %1, 1 \n" + " sc %1, %0 \n" + " beqzl %1, 1b \n" + " nop \n" + " .set reorder \n" + : "=m" (rw->lock), "=&r" (tmp) + : "m" (rw->lock) + : "memory"); + } else { + __asm__ __volatile__( + " .set noreorder # __raw_read_lock \n" + "1: ll %1, %2 \n" + " bltz %1, 2f \n" + " addu %1, 1 \n" + " sc %1, %0 \n" + " beqz %1, 1b \n" + " nop \n" + " .subsection 2 \n" + "2: ll %1, %2 \n" + " bltz %1, 2b \n" + " addu %1, 1 \n" + " b 1b \n" + " nop \n" + " .previous \n" + " .set reorder \n" + : "=m" (rw->lock), "=&r" (tmp) + : "m" (rw->lock) + : "memory"); + } + + smp_llsc_mb(); +} + +/* Note the use of sub, not subu which will make the kernel die with an + overflow exception if we ever try to unlock an rwlock that is already + unlocked or is being held by a writer. */ +static inline void __raw_read_unlock(raw_rwlock_t *rw) +{ + unsigned int tmp; + + smp_llsc_mb(); + + if (R10000_LLSC_WAR) { + __asm__ __volatile__( + "1: ll %1, %2 # __raw_read_unlock \n" + " sub %1, 1 \n" + " sc %1, %0 \n" + " beqzl %1, 1b \n" + : "=m" (rw->lock), "=&r" (tmp) + : "m" (rw->lock) + : "memory"); + } else { + __asm__ __volatile__( + " .set noreorder # __raw_read_unlock \n" + "1: ll %1, %2 \n" + " sub %1, 1 \n" + " sc %1, %0 \n" + " beqz %1, 2f \n" + " nop \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" + " .set reorder \n" + : "=m" (rw->lock), "=&r" (tmp) + : "m" (rw->lock) + : "memory"); + } +} + +static inline void __raw_write_lock(raw_rwlock_t *rw) +{ + unsigned int tmp; + + if (R10000_LLSC_WAR) { + __asm__ __volatile__( + " .set noreorder # __raw_write_lock \n" + "1: ll %1, %2 \n" + " bnez %1, 1b \n" + " lui %1, 0x8000 \n" + " sc %1, %0 \n" + " beqzl %1, 1b \n" + " nop \n" + " .set reorder \n" + : "=m" (rw->lock), "=&r" (tmp) + : "m" (rw->lock) + : "memory"); + } else { + __asm__ __volatile__( + " .set noreorder # __raw_write_lock \n" + "1: ll %1, %2 \n" + " bnez %1, 2f \n" + " lui %1, 0x8000 \n" + " sc %1, %0 \n" + " beqz %1, 2f \n" + " nop \n" + " .subsection 2 \n" + "2: ll %1, %2 \n" + " bnez %1, 2b \n" + " lui %1, 0x8000 \n" + " b 1b \n" + " nop \n" + " .previous \n" + " .set reorder \n" + : "=m" (rw->lock), "=&r" (tmp) + : "m" (rw->lock) + : "memory"); + } + + smp_llsc_mb(); +} + +static inline void __raw_write_unlock(raw_rwlock_t *rw) +{ + smp_mb(); + + __asm__ __volatile__( + " # __raw_write_unlock \n" + " sw $0, %0 \n" + : "=m" (rw->lock) + : "m" (rw->lock) + : "memory"); +} + +static inline int __raw_read_trylock(raw_rwlock_t *rw) +{ + unsigned int tmp; + int ret; + + if (R10000_LLSC_WAR) { + __asm__ __volatile__( + " .set noreorder # __raw_read_trylock \n" + " li %2, 0 \n" + "1: ll %1, %3 \n" + " bltz %1, 2f \n" + " addu %1, 1 \n" + " sc %1, %0 \n" + " .set reorder \n" + " beqzl %1, 1b \n" + " nop \n" + __WEAK_LLSC_MB + " li %2, 1 \n" + "2: \n" + : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) + : "m" (rw->lock) + : "memory"); + } else { + __asm__ __volatile__( + " .set noreorder # __raw_read_trylock \n" + " li %2, 0 \n" + "1: ll %1, %3 \n" + " bltz %1, 2f \n" + " addu %1, 1 \n" + " sc %1, %0 \n" + " beqz %1, 1b \n" + " nop \n" + " .set reorder \n" + __WEAK_LLSC_MB + " li %2, 1 \n" + "2: \n" + : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) + : "m" (rw->lock) + : "memory"); + } + + return ret; +} + +static inline int __raw_write_trylock(raw_rwlock_t *rw) +{ + unsigned int tmp; + int ret; + + if (R10000_LLSC_WAR) { + __asm__ __volatile__( + " .set noreorder # __raw_write_trylock \n" + " li %2, 0 \n" + "1: ll %1, %3 \n" + " bnez %1, 2f \n" + " lui %1, 0x8000 \n" + " sc %1, %0 \n" + " beqzl %1, 1b \n" + " nop \n" + __WEAK_LLSC_MB + " li %2, 1 \n" + " .set reorder \n" + "2: \n" + : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) + : "m" (rw->lock) + : "memory"); + } else { + __asm__ __volatile__( + " .set noreorder # __raw_write_trylock \n" + " li %2, 0 \n" + "1: ll %1, %3 \n" + " bnez %1, 2f \n" + " lui %1, 0x8000 \n" + " sc %1, %0 \n" + " beqz %1, 3f \n" + " li %2, 1 \n" + "2: \n" + __WEAK_LLSC_MB + " .subsection 2 \n" + "3: b 1b \n" + " li %2, 0 \n" + " .previous \n" + " .set reorder \n" + : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) + : "m" (rw->lock) + : "memory"); + } + + return ret; +} + + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* _ASM_SPINLOCK_H */ diff --git a/arch/mips/include/asm/spinlock_types.h b/arch/mips/include/asm/spinlock_types.h new file mode 100644 index 000000000000..adeedaa116c1 --- /dev/null +++ b/arch/mips/include/asm/spinlock_types.h @@ -0,0 +1,25 @@ +#ifndef _ASM_SPINLOCK_TYPES_H +#define _ASM_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct { + /* + * bits 0..13: serving_now + * bits 14 : junk data + * bits 15..28: ticket + */ + unsigned int lock; +} raw_spinlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 0 } + +typedef struct { + volatile unsigned int lock; +} raw_rwlock_t; + +#define __RAW_RW_LOCK_UNLOCKED { 0 } + +#endif diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h new file mode 100644 index 000000000000..4c37c4e5f72e --- /dev/null +++ b/arch/mips/include/asm/stackframe.h @@ -0,0 +1,574 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 99, 2001 Ralf Baechle + * Copyright (C) 1994, 1995, 1996 Paul M. Antoine. + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 2007 Maciej W. Rozycki + */ +#ifndef _ASM_STACKFRAME_H +#define _ASM_STACKFRAME_H + +#include <linux/threads.h> + +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/mipsregs.h> +#include <asm/asm-offsets.h> + +/* + * For SMTC kernel, global IE should be left set, and interrupts + * controlled exclusively via IXMT. + */ +#ifdef CONFIG_MIPS_MT_SMTC +#define STATMASK 0x1e +#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) +#define STATMASK 0x3f +#else +#define STATMASK 0x1f +#endif + +#ifdef CONFIG_MIPS_MT_SMTC +#include <asm/mipsmtregs.h> +#endif /* CONFIG_MIPS_MT_SMTC */ + + .macro SAVE_AT + .set push + .set noat + LONG_S $1, PT_R1(sp) + .set pop + .endm + + .macro SAVE_TEMP +#ifdef CONFIG_CPU_HAS_SMARTMIPS + mflhxu v1 + LONG_S v1, PT_LO(sp) + mflhxu v1 + LONG_S v1, PT_HI(sp) + mflhxu v1 + LONG_S v1, PT_ACX(sp) +#else + mfhi v1 + LONG_S v1, PT_HI(sp) + mflo v1 + LONG_S v1, PT_LO(sp) +#endif +#ifdef CONFIG_32BIT + LONG_S $8, PT_R8(sp) + LONG_S $9, PT_R9(sp) +#endif + LONG_S $10, PT_R10(sp) + LONG_S $11, PT_R11(sp) + LONG_S $12, PT_R12(sp) + LONG_S $13, PT_R13(sp) + LONG_S $14, PT_R14(sp) + LONG_S $15, PT_R15(sp) + LONG_S $24, PT_R24(sp) + .endm + + .macro SAVE_STATIC + LONG_S $16, PT_R16(sp) + LONG_S $17, PT_R17(sp) + LONG_S $18, PT_R18(sp) + LONG_S $19, PT_R19(sp) + LONG_S $20, PT_R20(sp) + LONG_S $21, PT_R21(sp) + LONG_S $22, PT_R22(sp) + LONG_S $23, PT_R23(sp) + LONG_S $30, PT_R30(sp) + .endm + +#ifdef CONFIG_SMP +#ifdef CONFIG_MIPS_MT_SMTC +#define PTEBASE_SHIFT 19 /* TCBIND */ +#else +#define PTEBASE_SHIFT 23 /* CONTEXT */ +#endif + .macro get_saved_sp /* SMP variation */ +#ifdef CONFIG_MIPS_MT_SMTC + mfc0 k0, CP0_TCBIND +#else + MFC0 k0, CP0_CONTEXT +#endif +#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) + lui k1, %hi(kernelsp) +#else + lui k1, %highest(kernelsp) + daddiu k1, %higher(kernelsp) + dsll k1, 16 + daddiu k1, %hi(kernelsp) + dsll k1, 16 +#endif + LONG_SRL k0, PTEBASE_SHIFT + LONG_ADDU k1, k0 + LONG_L k1, %lo(kernelsp)(k1) + .endm + + .macro set_saved_sp stackp temp temp2 +#ifdef CONFIG_MIPS_MT_SMTC + mfc0 \temp, CP0_TCBIND +#else + MFC0 \temp, CP0_CONTEXT +#endif + LONG_SRL \temp, PTEBASE_SHIFT + LONG_S \stackp, kernelsp(\temp) + .endm +#else + .macro get_saved_sp /* Uniprocessor variation */ +#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) + lui k1, %hi(kernelsp) +#else + lui k1, %highest(kernelsp) + daddiu k1, %higher(kernelsp) + dsll k1, k1, 16 + daddiu k1, %hi(kernelsp) + dsll k1, k1, 16 +#endif + LONG_L k1, %lo(kernelsp)(k1) + .endm + + .macro set_saved_sp stackp temp temp2 + LONG_S \stackp, kernelsp + .endm +#endif + + .macro SAVE_SOME + .set push + .set noat + .set reorder + mfc0 k0, CP0_STATUS + sll k0, 3 /* extract cu0 bit */ + .set noreorder + bltz k0, 8f + move k1, sp + .set reorder + /* Called from user mode, new stack. */ + get_saved_sp +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS +8: move k0, sp + PTR_SUBU sp, k1, PT_SIZE +#else + .set at=k0 +8: PTR_SUBU k1, PT_SIZE + .set noat + move k0, sp + move sp, k1 +#endif + LONG_S k0, PT_R29(sp) + LONG_S $3, PT_R3(sp) + /* + * You might think that you don't need to save $0, + * but the FPU emulator and gdb remote debug stub + * need it to operate correctly + */ + LONG_S $0, PT_R0(sp) + mfc0 v1, CP0_STATUS + LONG_S $2, PT_R2(sp) + LONG_S v1, PT_STATUS(sp) +#ifdef CONFIG_MIPS_MT_SMTC + /* + * Ideally, these instructions would be shuffled in + * to cover the pipeline delay. + */ + .set mips32 + mfc0 v1, CP0_TCSTATUS + .set mips0 + LONG_S v1, PT_TCSTATUS(sp) +#endif /* CONFIG_MIPS_MT_SMTC */ + LONG_S $4, PT_R4(sp) + mfc0 v1, CP0_CAUSE + LONG_S $5, PT_R5(sp) + LONG_S v1, PT_CAUSE(sp) + LONG_S $6, PT_R6(sp) + MFC0 v1, CP0_EPC + LONG_S $7, PT_R7(sp) +#ifdef CONFIG_64BIT + LONG_S $8, PT_R8(sp) + LONG_S $9, PT_R9(sp) +#endif + LONG_S v1, PT_EPC(sp) + LONG_S $25, PT_R25(sp) + LONG_S $28, PT_R28(sp) + LONG_S $31, PT_R31(sp) + ori $28, sp, _THREAD_MASK + xori $28, _THREAD_MASK + .set pop + .endm + + .macro SAVE_ALL + SAVE_SOME + SAVE_AT + SAVE_TEMP + SAVE_STATIC + .endm + + .macro RESTORE_AT + .set push + .set noat + LONG_L $1, PT_R1(sp) + .set pop + .endm + + .macro RESTORE_TEMP +#ifdef CONFIG_CPU_HAS_SMARTMIPS + LONG_L $24, PT_ACX(sp) + mtlhx $24 + LONG_L $24, PT_HI(sp) + mtlhx $24 + LONG_L $24, PT_LO(sp) + mtlhx $24 +#else + LONG_L $24, PT_LO(sp) + mtlo $24 + LONG_L $24, PT_HI(sp) + mthi $24 +#endif +#ifdef CONFIG_32BIT + LONG_L $8, PT_R8(sp) + LONG_L $9, PT_R9(sp) +#endif + LONG_L $10, PT_R10(sp) + LONG_L $11, PT_R11(sp) + LONG_L $12, PT_R12(sp) + LONG_L $13, PT_R13(sp) + LONG_L $14, PT_R14(sp) + LONG_L $15, PT_R15(sp) + LONG_L $24, PT_R24(sp) + .endm + + .macro RESTORE_STATIC + LONG_L $16, PT_R16(sp) + LONG_L $17, PT_R17(sp) + LONG_L $18, PT_R18(sp) + LONG_L $19, PT_R19(sp) + LONG_L $20, PT_R20(sp) + LONG_L $21, PT_R21(sp) + LONG_L $22, PT_R22(sp) + LONG_L $23, PT_R23(sp) + LONG_L $30, PT_R30(sp) + .endm + +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + + .macro RESTORE_SOME + .set push + .set reorder + .set noat + mfc0 a0, CP0_STATUS + li v1, 0xff00 + ori a0, STATMASK + xori a0, STATMASK + mtc0 a0, CP0_STATUS + and a0, v1 + LONG_L v0, PT_STATUS(sp) + nor v1, $0, v1 + and v0, v1 + or v0, a0 + mtc0 v0, CP0_STATUS + LONG_L $31, PT_R31(sp) + LONG_L $28, PT_R28(sp) + LONG_L $25, PT_R25(sp) + LONG_L $7, PT_R7(sp) + LONG_L $6, PT_R6(sp) + LONG_L $5, PT_R5(sp) + LONG_L $4, PT_R4(sp) + LONG_L $3, PT_R3(sp) + LONG_L $2, PT_R2(sp) + .set pop + .endm + + .macro RESTORE_SP_AND_RET + .set push + .set noreorder + LONG_L k0, PT_EPC(sp) + LONG_L sp, PT_R29(sp) + jr k0 + rfe + .set pop + .endm + +#else + .macro RESTORE_SOME + .set push + .set reorder + .set noat +#ifdef CONFIG_MIPS_MT_SMTC + .set mips32r2 + /* + * We need to make sure the read-modify-write + * of Status below isn't perturbed by an interrupt + * or cross-TC access, so we need to do at least a DMT, + * protected by an interrupt-inhibit. But setting IXMT + * also creates a few-cycle window where an IPI could + * be queued and not be detected before potentially + * returning to a WAIT or user-mode loop. It must be + * replayed. + * + * We're in the middle of a context switch, and + * we can't dispatch it directly without trashing + * some registers, so we'll try to detect this unlikely + * case and program a software interrupt in the VPE, + * as would be done for a cross-VPE IPI. To accomodate + * the handling of that case, we're doing a DVPE instead + * of just a DMT here to protect against other threads. + * This is a lot of cruft to cover a tiny window. + * If you can find a better design, implement it! + * + */ + mfc0 v0, CP0_TCSTATUS + ori v0, TCSTATUS_IXMT + mtc0 v0, CP0_TCSTATUS + _ehb + DVPE 5 # dvpe a1 + jal mips_ihb +#endif /* CONFIG_MIPS_MT_SMTC */ + mfc0 a0, CP0_STATUS + ori a0, STATMASK + xori a0, STATMASK + mtc0 a0, CP0_STATUS + li v1, 0xff00 + and a0, v1 + LONG_L v0, PT_STATUS(sp) + nor v1, $0, v1 + and v0, v1 + or v0, a0 + mtc0 v0, CP0_STATUS +#ifdef CONFIG_MIPS_MT_SMTC +/* + * Only after EXL/ERL have been restored to status can we + * restore TCStatus.IXMT. + */ + LONG_L v1, PT_TCSTATUS(sp) + _ehb + mfc0 a0, CP0_TCSTATUS + andi v1, TCSTATUS_IXMT + bnez v1, 0f + +/* + * We'd like to detect any IPIs queued in the tiny window + * above and request an software interrupt to service them + * when we ERET. + * + * Computing the offset into the IPIQ array of the executing + * TC's IPI queue in-line would be tedious. We use part of + * the TCContext register to hold 16 bits of offset that we + * can add in-line to find the queue head. + */ + mfc0 v0, CP0_TCCONTEXT + la a2, IPIQ + srl v0, v0, 16 + addu a2, a2, v0 + LONG_L v0, 0(a2) + beqz v0, 0f +/* + * If we have a queue, provoke dispatch within the VPE by setting C_SW1 + */ + mfc0 v0, CP0_CAUSE + ori v0, v0, C_SW1 + mtc0 v0, CP0_CAUSE +0: + /* + * This test should really never branch but + * let's be prudent here. Having atomized + * the shared register modifications, we can + * now EVPE, and must do so before interrupts + * are potentially re-enabled. + */ + andi a1, a1, MVPCONTROL_EVP + beqz a1, 1f + evpe +1: + /* We know that TCStatua.IXMT should be set from above */ + xori a0, a0, TCSTATUS_IXMT + or a0, a0, v1 + mtc0 a0, CP0_TCSTATUS + _ehb + + .set mips0 +#endif /* CONFIG_MIPS_MT_SMTC */ + LONG_L v1, PT_EPC(sp) + MTC0 v1, CP0_EPC + LONG_L $31, PT_R31(sp) + LONG_L $28, PT_R28(sp) + LONG_L $25, PT_R25(sp) +#ifdef CONFIG_64BIT + LONG_L $8, PT_R8(sp) + LONG_L $9, PT_R9(sp) +#endif + LONG_L $7, PT_R7(sp) + LONG_L $6, PT_R6(sp) + LONG_L $5, PT_R5(sp) + LONG_L $4, PT_R4(sp) + LONG_L $3, PT_R3(sp) + LONG_L $2, PT_R2(sp) + .set pop + .endm + + .macro RESTORE_SP_AND_RET + LONG_L sp, PT_R29(sp) + .set mips3 + eret + .set mips0 + .endm + +#endif + + .macro RESTORE_SP + LONG_L sp, PT_R29(sp) + .endm + + .macro RESTORE_ALL + RESTORE_TEMP + RESTORE_STATIC + RESTORE_AT + RESTORE_SOME + RESTORE_SP + .endm + + .macro RESTORE_ALL_AND_RET + RESTORE_TEMP + RESTORE_STATIC + RESTORE_AT + RESTORE_SOME + RESTORE_SP_AND_RET + .endm + +/* + * Move to kernel mode and disable interrupts. + * Set cp0 enable bit as sign that we're running on the kernel stack + */ + .macro CLI +#if !defined(CONFIG_MIPS_MT_SMTC) + mfc0 t0, CP0_STATUS + li t1, ST0_CU0 | STATMASK + or t0, t1 + xori t0, STATMASK + mtc0 t0, CP0_STATUS +#else /* CONFIG_MIPS_MT_SMTC */ + /* + * For SMTC, we need to set privilege + * and disable interrupts only for the + * current TC, using the TCStatus register. + */ + mfc0 t0, CP0_TCSTATUS + /* Fortunately CU 0 is in the same place in both registers */ + /* Set TCU0, TMX, TKSU (for later inversion) and IXMT */ + li t1, ST0_CU0 | 0x08001c00 + or t0, t1 + /* Clear TKSU, leave IXMT */ + xori t0, 0x00001800 + mtc0 t0, CP0_TCSTATUS + _ehb + /* We need to leave the global IE bit set, but clear EXL...*/ + mfc0 t0, CP0_STATUS + ori t0, ST0_EXL | ST0_ERL + xori t0, ST0_EXL | ST0_ERL + mtc0 t0, CP0_STATUS +#endif /* CONFIG_MIPS_MT_SMTC */ + irq_disable_hazard + .endm + +/* + * Move to kernel mode and enable interrupts. + * Set cp0 enable bit as sign that we're running on the kernel stack + */ + .macro STI +#if !defined(CONFIG_MIPS_MT_SMTC) + mfc0 t0, CP0_STATUS + li t1, ST0_CU0 | STATMASK + or t0, t1 + xori t0, STATMASK & ~1 + mtc0 t0, CP0_STATUS +#else /* CONFIG_MIPS_MT_SMTC */ + /* + * For SMTC, we need to set privilege + * and enable interrupts only for the + * current TC, using the TCStatus register. + */ + _ehb + mfc0 t0, CP0_TCSTATUS + /* Fortunately CU 0 is in the same place in both registers */ + /* Set TCU0, TKSU (for later inversion) and IXMT */ + li t1, ST0_CU0 | 0x08001c00 + or t0, t1 + /* Clear TKSU *and* IXMT */ + xori t0, 0x00001c00 + mtc0 t0, CP0_TCSTATUS + _ehb + /* We need to leave the global IE bit set, but clear EXL...*/ + mfc0 t0, CP0_STATUS + ori t0, ST0_EXL + xori t0, ST0_EXL + mtc0 t0, CP0_STATUS + /* irq_enable_hazard below should expand to EHB for 24K/34K cpus */ +#endif /* CONFIG_MIPS_MT_SMTC */ + irq_enable_hazard + .endm + +/* + * Just move to kernel mode and leave interrupts as they are. Note + * for the R3000 this means copying the previous enable from IEp. + * Set cp0 enable bit as sign that we're running on the kernel stack + */ + .macro KMODE +#ifdef CONFIG_MIPS_MT_SMTC + /* + * This gets baroque in SMTC. We want to + * protect the non-atomic clearing of EXL + * with DMT/EMT, but we don't want to take + * an interrupt while DMT is still in effect. + */ + + /* KMODE gets invoked from both reorder and noreorder code */ + .set push + .set mips32r2 + .set noreorder + mfc0 v0, CP0_TCSTATUS + andi v1, v0, TCSTATUS_IXMT + ori v0, TCSTATUS_IXMT + mtc0 v0, CP0_TCSTATUS + _ehb + DMT 2 # dmt v0 + /* + * We don't know a priori if ra is "live" + */ + move t0, ra + jal mips_ihb + nop /* delay slot */ + move ra, t0 +#endif /* CONFIG_MIPS_MT_SMTC */ + mfc0 t0, CP0_STATUS + li t1, ST0_CU0 | (STATMASK & ~1) +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + andi t2, t0, ST0_IEP + srl t2, 2 + or t0, t2 +#endif + or t0, t1 + xori t0, STATMASK & ~1 + mtc0 t0, CP0_STATUS +#ifdef CONFIG_MIPS_MT_SMTC + _ehb + andi v0, v0, VPECONTROL_TE + beqz v0, 2f + nop /* delay slot */ + emt +2: + mfc0 v0, CP0_TCSTATUS + /* Clear IXMT, then OR in previous value */ + ori v0, TCSTATUS_IXMT + xori v0, TCSTATUS_IXMT + or v0, v1, v0 + mtc0 v0, CP0_TCSTATUS + /* + * irq_disable_hazard below should expand to EHB + * on 24K/34K CPUS + */ + .set pop +#endif /* CONFIG_MIPS_MT_SMTC */ + irq_disable_hazard + .endm + +#endif /* _ASM_STACKFRAME_H */ diff --git a/arch/mips/include/asm/stacktrace.h b/arch/mips/include/asm/stacktrace.h new file mode 100644 index 000000000000..0bf82818aa53 --- /dev/null +++ b/arch/mips/include/asm/stacktrace.h @@ -0,0 +1,48 @@ +#ifndef _ASM_STACKTRACE_H +#define _ASM_STACKTRACE_H + +#include <asm/ptrace.h> + +#ifdef CONFIG_KALLSYMS +extern int raw_show_trace; +extern unsigned long unwind_stack(struct task_struct *task, unsigned long *sp, + unsigned long pc, unsigned long *ra); +#else +#define raw_show_trace 1 +static inline unsigned long unwind_stack(struct task_struct *task, + unsigned long *sp, unsigned long pc, unsigned long *ra) +{ + return 0; +} +#endif + +static __always_inline void prepare_frametrace(struct pt_regs *regs) +{ +#ifndef CONFIG_KALLSYMS + /* + * Remove any garbage that may be in regs (specially func + * addresses) to avoid show_raw_backtrace() to report them + */ + memset(regs, 0, sizeof(*regs)); +#endif + __asm__ __volatile__( + ".set push\n\t" + ".set noat\n\t" +#ifdef CONFIG_64BIT + "1: dla $1, 1b\n\t" + "sd $1, %0\n\t" + "sd $29, %1\n\t" + "sd $31, %2\n\t" +#else + "1: la $1, 1b\n\t" + "sw $1, %0\n\t" + "sw $29, %1\n\t" + "sw $31, %2\n\t" +#endif + ".set pop\n\t" + : "=m" (regs->cp0_epc), + "=m" (regs->regs[29]), "=m" (regs->regs[31]) + : : "memory"); +} + +#endif /* _ASM_STACKTRACE_H */ diff --git a/arch/mips/include/asm/stat.h b/arch/mips/include/asm/stat.h new file mode 100644 index 000000000000..6e00f751ab6d --- /dev/null +++ b/arch/mips/include/asm/stat.h @@ -0,0 +1,132 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999, 2000 Ralf Baechle + * Copyright (C) 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_STAT_H +#define _ASM_STAT_H + +#include <linux/types.h> + +#include <asm/sgidefs.h> + +#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32) + +struct stat { + unsigned st_dev; + long st_pad1[3]; /* Reserved for network id */ + ino_t st_ino; + mode_t st_mode; + nlink_t st_nlink; + uid_t st_uid; + gid_t st_gid; + unsigned st_rdev; + long st_pad2[2]; + off_t st_size; + long st_pad3; + /* + * Actually this should be timestruc_t st_atime, st_mtime and st_ctime + * but we don't have it under Linux. + */ + time_t st_atime; + long st_atime_nsec; + time_t st_mtime; + long st_mtime_nsec; + time_t st_ctime; + long st_ctime_nsec; + long st_blksize; + long st_blocks; + long st_pad4[14]; +}; + +/* + * This matches struct stat64 in glibc2.1, hence the absolutely insane + * amounts of padding around dev_t's. The memory layout is the same as of + * struct stat of the 64-bit kernel. + */ + +struct stat64 { + unsigned long st_dev; + unsigned long st_pad0[3]; /* Reserved for st_dev expansion */ + + unsigned long long st_ino; + + mode_t st_mode; + nlink_t st_nlink; + + uid_t st_uid; + gid_t st_gid; + + unsigned long st_rdev; + unsigned long st_pad1[3]; /* Reserved for st_rdev expansion */ + + long long st_size; + + /* + * Actually this should be timestruc_t st_atime, st_mtime and st_ctime + * but we don't have it under Linux. + */ + time_t st_atime; + unsigned long st_atime_nsec; /* Reserved for st_atime expansion */ + + time_t st_mtime; + unsigned long st_mtime_nsec; /* Reserved for st_mtime expansion */ + + time_t st_ctime; + unsigned long st_ctime_nsec; /* Reserved for st_ctime expansion */ + + unsigned long st_blksize; + unsigned long st_pad2; + + long long st_blocks; +}; + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ + +#if _MIPS_SIM == _MIPS_SIM_ABI64 + +/* The memory layout is the same as of struct stat64 of the 32-bit kernel. */ +struct stat { + unsigned int st_dev; + unsigned int st_pad0[3]; /* Reserved for st_dev expansion */ + + unsigned long st_ino; + + mode_t st_mode; + nlink_t st_nlink; + + uid_t st_uid; + gid_t st_gid; + + unsigned int st_rdev; + unsigned int st_pad1[3]; /* Reserved for st_rdev expansion */ + + off_t st_size; + + /* + * Actually this should be timestruc_t st_atime, st_mtime and st_ctime + * but we don't have it under Linux. + */ + unsigned int st_atime; + unsigned int st_atime_nsec; + + unsigned int st_mtime; + unsigned int st_mtime_nsec; + + unsigned int st_ctime; + unsigned int st_ctime_nsec; + + unsigned int st_blksize; + unsigned int st_pad2; + + unsigned long st_blocks; +}; + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ + +#define STAT_HAVE_NSEC 1 + +#endif /* _ASM_STAT_H */ diff --git a/arch/mips/include/asm/statfs.h b/arch/mips/include/asm/statfs.h new file mode 100644 index 000000000000..c3ddf973c1c0 --- /dev/null +++ b/arch/mips/include/asm/statfs.h @@ -0,0 +1,96 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999 by Ralf Baechle + */ +#ifndef _ASM_STATFS_H +#define _ASM_STATFS_H + +#include <linux/posix_types.h> +#include <asm/sgidefs.h> + +#ifndef __KERNEL_STRICT_NAMES + +#include <linux/types.h> + +typedef __kernel_fsid_t fsid_t; + +#endif + +struct statfs { + long f_type; +#define f_fstyp f_type + long f_bsize; + long f_frsize; /* Fragment size - unsupported */ + long f_blocks; + long f_bfree; + long f_files; + long f_ffree; + long f_bavail; + + /* Linux specials */ + __kernel_fsid_t f_fsid; + long f_namelen; + long f_spare[6]; +}; + +#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32) + +/* + * Unlike the traditional version the LFAPI version has none of the ABI junk + */ +struct statfs64 { + __u32 f_type; + __u32 f_bsize; + __u32 f_frsize; /* Fragment size - unsupported */ + __u32 __pad; + __u64 f_blocks; + __u64 f_bfree; + __u64 f_files; + __u64 f_ffree; + __u64 f_bavail; + __kernel_fsid_t f_fsid; + __u32 f_namelen; + __u32 f_spare[6]; +}; + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ + +#if _MIPS_SIM == _MIPS_SIM_ABI64 + +struct statfs64 { /* Same as struct statfs */ + long f_type; + long f_bsize; + long f_frsize; /* Fragment size - unsupported */ + long f_blocks; + long f_bfree; + long f_files; + long f_ffree; + long f_bavail; + + /* Linux specials */ + __kernel_fsid_t f_fsid; + long f_namelen; + long f_spare[6]; +}; + +struct compat_statfs64 { + __u32 f_type; + __u32 f_bsize; + __u32 f_frsize; /* Fragment size - unsupported */ + __u32 __pad; + __u64 f_blocks; + __u64 f_bfree; + __u64 f_files; + __u64 f_ffree; + __u64 f_bavail; + __kernel_fsid_t f_fsid; + __u32 f_namelen; + __u32 f_spare[6]; +}; + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ + +#endif /* _ASM_STATFS_H */ diff --git a/arch/mips/include/asm/string.h b/arch/mips/include/asm/string.h new file mode 100644 index 000000000000..436e3ad352d9 --- /dev/null +++ b/arch/mips/include/asm/string.h @@ -0,0 +1,143 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1994, 95, 96, 97, 98, 2000, 01 Ralf Baechle + * Copyright (c) 2000 by Silicon Graphics, Inc. + * Copyright (c) 2001 MIPS Technologies, Inc. + */ +#ifndef _ASM_STRING_H +#define _ASM_STRING_H + + +/* + * Most of the inline functions are rather naive implementations so I just + * didn't bother updating them for 64-bit ... + */ +#ifdef CONFIG_32BIT + +#ifndef IN_STRING_C + +#define __HAVE_ARCH_STRCPY +static __inline__ char *strcpy(char *__dest, __const__ char *__src) +{ + char *__xdest = __dest; + + __asm__ __volatile__( + ".set\tnoreorder\n\t" + ".set\tnoat\n" + "1:\tlbu\t$1,(%1)\n\t" + "addiu\t%1,1\n\t" + "sb\t$1,(%0)\n\t" + "bnez\t$1,1b\n\t" + "addiu\t%0,1\n\t" + ".set\tat\n\t" + ".set\treorder" + : "=r" (__dest), "=r" (__src) + : "0" (__dest), "1" (__src) + : "memory"); + + return __xdest; +} + +#define __HAVE_ARCH_STRNCPY +static __inline__ char *strncpy(char *__dest, __const__ char *__src, size_t __n) +{ + char *__xdest = __dest; + + if (__n == 0) + return __xdest; + + __asm__ __volatile__( + ".set\tnoreorder\n\t" + ".set\tnoat\n" + "1:\tlbu\t$1,(%1)\n\t" + "subu\t%2,1\n\t" + "sb\t$1,(%0)\n\t" + "beqz\t$1,2f\n\t" + "addiu\t%0,1\n\t" + "bnez\t%2,1b\n\t" + "addiu\t%1,1\n" + "2:\n\t" + ".set\tat\n\t" + ".set\treorder" + : "=r" (__dest), "=r" (__src), "=r" (__n) + : "0" (__dest), "1" (__src), "2" (__n) + : "memory"); + + return __xdest; +} + +#define __HAVE_ARCH_STRCMP +static __inline__ int strcmp(__const__ char *__cs, __const__ char *__ct) +{ + int __res; + + __asm__ __volatile__( + ".set\tnoreorder\n\t" + ".set\tnoat\n\t" + "lbu\t%2,(%0)\n" + "1:\tlbu\t$1,(%1)\n\t" + "addiu\t%0,1\n\t" + "bne\t$1,%2,2f\n\t" + "addiu\t%1,1\n\t" + "bnez\t%2,1b\n\t" + "lbu\t%2,(%0)\n\t" +#if defined(CONFIG_CPU_R3000) + "nop\n\t" +#endif + "move\t%2,$1\n" + "2:\tsubu\t%2,$1\n" + "3:\t.set\tat\n\t" + ".set\treorder" + : "=r" (__cs), "=r" (__ct), "=r" (__res) + : "0" (__cs), "1" (__ct)); + + return __res; +} + +#endif /* !defined(IN_STRING_C) */ + +#define __HAVE_ARCH_STRNCMP +static __inline__ int +strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count) +{ + int __res; + + __asm__ __volatile__( + ".set\tnoreorder\n\t" + ".set\tnoat\n" + "1:\tlbu\t%3,(%0)\n\t" + "beqz\t%2,2f\n\t" + "lbu\t$1,(%1)\n\t" + "subu\t%2,1\n\t" + "bne\t$1,%3,3f\n\t" + "addiu\t%0,1\n\t" + "bnez\t%3,1b\n\t" + "addiu\t%1,1\n" + "2:\n\t" +#if defined(CONFIG_CPU_R3000) + "nop\n\t" +#endif + "move\t%3,$1\n" + "3:\tsubu\t%3,$1\n\t" + ".set\tat\n\t" + ".set\treorder" + : "=r" (__cs), "=r" (__ct), "=r" (__count), "=r" (__res) + : "0" (__cs), "1" (__ct), "2" (__count)); + + return __res; +} +#endif /* CONFIG_32BIT */ + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *__s, int __c, size_t __count); + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *__to, __const__ void *__from, size_t __n); + +#define __HAVE_ARCH_MEMMOVE +extern void *memmove(void *__dest, __const__ void *__src, size_t __n); + +#endif /* _ASM_STRING_H */ diff --git a/arch/mips/include/asm/suspend.h b/arch/mips/include/asm/suspend.h new file mode 100644 index 000000000000..2562f8f9be0e --- /dev/null +++ b/arch/mips/include/asm/suspend.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SUSPEND_H +#define __ASM_SUSPEND_H + +/* Somewhen... Maybe :-) */ + +#endif /* __ASM_SUSPEND_H */ diff --git a/arch/mips/include/asm/sysmips.h b/arch/mips/include/asm/sysmips.h new file mode 100644 index 000000000000..4f47b7d6a5f7 --- /dev/null +++ b/arch/mips/include/asm/sysmips.h @@ -0,0 +1,25 @@ +/* + * Definitions for the MIPS sysmips(2) call + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 by Ralf Baechle + */ +#ifndef _ASM_SYSMIPS_H +#define _ASM_SYSMIPS_H + +/* + * Commands for the sysmips(2) call + * + * sysmips(2) is deprecated - though some existing software uses it. + * We only support the following commands. + */ +#define SETNAME 1 /* set hostname */ +#define FLUSH_CACHE 3 /* writeback and invalidate caches */ +#define MIPS_FIXADE 7 /* control address error fixing */ +#define MIPS_RDNVRAM 10 /* read NVRAM */ +#define MIPS_ATOMIC_SET 2001 /* atomically set variable */ + +#endif /* _ASM_SYSMIPS_H */ diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h new file mode 100644 index 000000000000..cd30f83235bb --- /dev/null +++ b/arch/mips/include/asm/system.h @@ -0,0 +1,222 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003, 06 by Ralf Baechle + * Copyright (C) 1996 by Paul M. Antoine + * Copyright (C) 1999 Silicon Graphics + * Kevin D. Kissell, kevink@mips.org and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. + */ +#ifndef _ASM_SYSTEM_H +#define _ASM_SYSTEM_H + +#include <linux/types.h> +#include <linux/irqflags.h> + +#include <asm/addrspace.h> +#include <asm/barrier.h> +#include <asm/cmpxchg.h> +#include <asm/cpu-features.h> +#include <asm/dsp.h> +#include <asm/watch.h> +#include <asm/war.h> + + +/* + * switch_to(n) should switch tasks to task nr n, first + * checking that n isn't the current task, in which case it does nothing. + */ +extern asmlinkage void *resume(void *last, void *next, void *next_ti); + +struct task_struct; + +#ifdef CONFIG_MIPS_MT_FPAFF + +/* + * Handle the scheduler resume end of FPU affinity management. We do this + * inline to try to keep the overhead down. If we have been forced to run on + * a "CPU" with an FPU because of a previous high level of FP computation, + * but did not actually use the FPU during the most recent time-slice (CU1 + * isn't set), we undo the restriction on cpus_allowed. + * + * We're not calling set_cpus_allowed() here, because we have no need to + * force prompt migration - we're already switching the current CPU to a + * different thread. + */ + +#define __mips_mt_fpaff_switch_to(prev) \ +do { \ + struct thread_info *__prev_ti = task_thread_info(prev); \ + \ + if (cpu_has_fpu && \ + test_ti_thread_flag(__prev_ti, TIF_FPUBOUND) && \ + (!(KSTK_STATUS(prev) & ST0_CU1))) { \ + clear_ti_thread_flag(__prev_ti, TIF_FPUBOUND); \ + prev->cpus_allowed = prev->thread.user_cpus_allowed; \ + } \ + next->thread.emulated_fp = 0; \ +} while(0) + +#else +#define __mips_mt_fpaff_switch_to(prev) do { (void) (prev); } while (0) +#endif + +#define switch_to(prev, next, last) \ +do { \ + __mips_mt_fpaff_switch_to(prev); \ + if (cpu_has_dsp) \ + __save_dsp(prev); \ + (last) = resume(prev, next, task_thread_info(next)); \ +} while (0) + +#define finish_arch_switch(prev) \ +do { \ + if (cpu_has_dsp) \ + __restore_dsp(current); \ + if (cpu_has_userlocal) \ + write_c0_userlocal(current_thread_info()->tp_value); \ + __restore_watch(); \ +} while (0) + +static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) +{ + __u32 retval; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long dummy; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %0, %3 # xchg_u32 \n" + " .set mips0 \n" + " move %2, %z4 \n" + " .set mips3 \n" + " sc %2, %1 \n" + " beqzl %2, 1b \n" + " .set mips0 \n" + : "=&r" (retval), "=m" (*m), "=&r" (dummy) + : "R" (*m), "Jr" (val) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long dummy; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %0, %3 # xchg_u32 \n" + " .set mips0 \n" + " move %2, %z4 \n" + " .set mips3 \n" + " sc %2, %1 \n" + " beqz %2, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (retval), "=m" (*m), "=&r" (dummy) + : "R" (*m), "Jr" (val) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + retval = *m; + *m = val; + raw_local_irq_restore(flags); /* implies memory barrier */ + } + + smp_llsc_mb(); + + return retval; +} + +#ifdef CONFIG_64BIT +static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val) +{ + __u64 retval; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long dummy; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %0, %3 # xchg_u64 \n" + " move %2, %z4 \n" + " scd %2, %1 \n" + " beqzl %2, 1b \n" + " .set mips0 \n" + : "=&r" (retval), "=m" (*m), "=&r" (dummy) + : "R" (*m), "Jr" (val) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long dummy; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %0, %3 # xchg_u64 \n" + " move %2, %z4 \n" + " scd %2, %1 \n" + " beqz %2, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (retval), "=m" (*m), "=&r" (dummy) + : "R" (*m), "Jr" (val) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + retval = *m; + *m = val; + raw_local_irq_restore(flags); /* implies memory barrier */ + } + + smp_llsc_mb(); + + return retval; +} +#else +extern __u64 __xchg_u64_unsupported_on_32bit_kernels(volatile __u64 * m, __u64 val); +#define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels +#endif + +/* This function doesn't exist, so you'll get a linker error + if something tries to do an invalid xchg(). */ +extern void __xchg_called_with_bad_pointer(void); + +static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) +{ + switch (size) { + case 4: + return __xchg_u32(ptr, x); + case 8: + return __xchg_u64(ptr, x); + } + __xchg_called_with_bad_pointer(); + return x; +} + +#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) + +extern void set_handler(unsigned long offset, void *addr, unsigned long len); +extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len); + +typedef void (*vi_handler_t)(void); +extern void *set_vi_handler(int n, vi_handler_t addr); + +extern void *set_except_vector(int n, void *addr); +extern unsigned long ebase; +extern void per_cpu_trap_init(void); + +/* + * See include/asm-ia64/system.h; prevents deadlock on SMP + * systems. + */ +#define __ARCH_WANT_UNLOCKED_CTXSW + +extern unsigned long arch_align_stack(unsigned long sp); + +#endif /* _ASM_SYSTEM_H */ diff --git a/arch/mips/include/asm/termbits.h b/arch/mips/include/asm/termbits.h new file mode 100644 index 000000000000..c83c68444e86 --- /dev/null +++ b/arch/mips/include/asm/termbits.h @@ -0,0 +1,226 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 99, 2001, 06 Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#ifndef _ASM_TERMBITS_H +#define _ASM_TERMBITS_H + +#include <linux/posix_types.h> + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +/* + * The ABI says nothing about NCC but seems to use NCCS as + * replacement for it in struct termio + */ +#define NCCS 23 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 /* Interrupt character [ISIG]. */ +#define VQUIT 1 /* Quit character [ISIG]. */ +#define VERASE 2 /* Erase character [ICANON]. */ +#define VKILL 3 /* Kill-line character [ICANON]. */ +#define VMIN 4 /* Minimum number of bytes read at once [!ICANON]. */ +#define VTIME 5 /* Time-out value (tenths of a second) [!ICANON]. */ +#define VEOL2 6 /* Second EOL character [ICANON]. */ +#define VSWTC 7 /* ??? */ +#define VSWTCH VSWTC +#define VSTART 8 /* Start (X-ON) character [IXON, IXOFF]. */ +#define VSTOP 9 /* Stop (X-OFF) character [IXON, IXOFF]. */ +#define VSUSP 10 /* Suspend character [ISIG]. */ +#if 0 +/* + * VDSUSP is not supported + */ +#define VDSUSP 11 /* Delayed suspend character [ISIG]. */ +#endif +#define VREPRINT 12 /* Reprint-line character [ICANON]. */ +#define VDISCARD 13 /* Discard character [IEXTEN]. */ +#define VWERASE 14 /* Word-erase character [ICANON]. */ +#define VLNEXT 15 /* Literal-next character [IEXTEN]. */ +#define VEOF 16 /* End-of-file character [ICANON]. */ +#define VEOL 17 /* End-of-line character [ICANON]. */ + +/* c_iflag bits */ +#define IGNBRK 0000001 /* Ignore break condition. */ +#define BRKINT 0000002 /* Signal interrupt on break. */ +#define IGNPAR 0000004 /* Ignore characters with parity errors. */ +#define PARMRK 0000010 /* Mark parity and framing errors. */ +#define INPCK 0000020 /* Enable input parity check. */ +#define ISTRIP 0000040 /* Strip 8th bit off characters. */ +#define INLCR 0000100 /* Map NL to CR on input. */ +#define IGNCR 0000200 /* Ignore CR. */ +#define ICRNL 0000400 /* Map CR to NL on input. */ +#define IUCLC 0001000 /* Map upper case to lower case on input. */ +#define IXON 0002000 /* Enable start/stop output control. */ +#define IXANY 0004000 /* Any character will restart after stop. */ +#define IXOFF 0010000 /* Enable start/stop input control. */ +#define IMAXBEL 0020000 /* Ring bell when input queue is full. */ +#define IUTF8 0040000 /* Input is UTF-8 */ + +/* c_oflag bits */ +#define OPOST 0000001 /* Perform output processing. */ +#define OLCUC 0000002 /* Map lower case to upper case on output. */ +#define ONLCR 0000004 /* Map NL to CR-NL on output. */ +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 +/* +#define PAGEOUT ??? +#define WRAP ??? + */ + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 /* Number of bits per byte (mask). */ +#define CS5 0000000 /* 5 bits per byte. */ +#define CS6 0000020 /* 6 bits per byte. */ +#define CS7 0000040 /* 7 bits per byte. */ +#define CS8 0000060 /* 8 bits per byte. */ +#define CSTOPB 0000100 /* Two stop bits instead of one. */ +#define CREAD 0000200 /* Enable receiver. */ +#define PARENB 0000400 /* Parity enable. */ +#define PARODD 0001000 /* Odd parity instead of even. */ +#define HUPCL 0002000 /* Hang up on last close. */ +#define CLOCAL 0004000 /* Ignore modem status lines. */ +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 /* Enable signals. */ +#define ICANON 0000002 /* Do erase and kill processing. */ +#define XCASE 0000004 +#define ECHO 0000010 /* Enable echo. */ +#define ECHOE 0000020 /* Visual erase for ERASE. */ +#define ECHOK 0000040 /* Echo NL after KILL. */ +#define ECHONL 0000100 /* Echo NL even if ECHO is off. */ +#define NOFLSH 0000200 /* Disable flush after interrupt. */ +#define IEXTEN 0000400 /* Enable DISCARD and LNEXT. */ +#define ECHOCTL 0001000 /* Echo control characters as ^X. */ +#define ECHOPRT 0002000 /* Hardcopy visual erase. */ +#define ECHOKE 0004000 /* Visual erase for KILL. */ +#define FLUSHO 0020000 +#define PENDIN 0040000 /* Retype pending input (state). */ +#define TOSTOP 0100000 /* Send SIGTTOU for background output. */ +#define ITOSTOP TOSTOP + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 /* Suspend output. */ +#define TCOON 1 /* Restart suspended output. */ +#define TCIOFF 2 /* Send a STOP character. */ +#define TCION 3 /* Send a START character. */ + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 /* Discard data received but not yet read. */ +#define TCOFLUSH 1 /* Discard data written but not yet sent. */ +#define TCIOFLUSH 2 /* Discard all pending data. */ + +/* tcsetattr uses these */ +#define TCSANOW TCSETS /* Change immediately. */ +#define TCSADRAIN TCSETSW /* Change when pending output is written. */ +#define TCSAFLUSH TCSETSF /* Flush pending input before changing. */ + +#endif /* _ASM_TERMBITS_H */ diff --git a/arch/mips/include/asm/termios.h b/arch/mips/include/asm/termios.h new file mode 100644 index 000000000000..a275661fa7e1 --- /dev/null +++ b/arch/mips/include/asm/termios.h @@ -0,0 +1,132 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1996, 2000, 2001 by Ralf Baechle + * Copyright (C) 2000, 2001 Silicon Graphics, Inc. + */ +#ifndef _ASM_TERMIOS_H +#define _ASM_TERMIOS_H + +#include <asm/termbits.h> +#include <asm/ioctls.h> + +struct sgttyb { + char sg_ispeed; + char sg_ospeed; + char sg_erase; + char sg_kill; + int sg_flags; /* SGI special - int, not short */ +}; + +struct tchars { + char t_intrc; + char t_quitc; + char t_startc; + char t_stopc; + char t_eofc; + char t_brkc; +}; + +struct ltchars { + char t_suspc; /* stop process signal */ + char t_dsuspc; /* delayed stop process signal */ + char t_rprntc; /* reprint line */ + char t_flushc; /* flush output (toggles) */ + char t_werasc; /* word erase */ + char t_lnextc; /* literal next character */ +}; + +/* TIOCGSIZE, TIOCSSIZE not defined yet. Only needed for SunOS source + compatibility anyway ... */ + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + char c_line; /* line discipline */ + unsigned char c_cc[NCCS]; /* control characters */ +}; + +#ifdef __KERNEL__ +#include <linux/module.h> + +/* + * intr=^C quit=^\ erase=del kill=^U + * vmin=\1 vtime=\0 eol2=\0 swtc=\0 + * start=^Q stop=^S susp=^Z vdsusp= + * reprint=^R discard=^U werase=^W lnext=^V + * eof=^D eol=\0 + */ +#define INIT_C_CC "\003\034\177\025\1\0\0\0\021\023\032\0\022\017\027\026\004\0" +#endif + +/* modem lines */ +#define TIOCM_LE 0x001 /* line enable */ +#define TIOCM_DTR 0x002 /* data terminal ready */ +#define TIOCM_RTS 0x004 /* request to send */ +#define TIOCM_ST 0x010 /* secondary transmit */ +#define TIOCM_SR 0x020 /* secondary receive */ +#define TIOCM_CTS 0x040 /* clear to send */ +#define TIOCM_CAR 0x100 /* carrier detect */ +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RNG 0x200 /* ring */ +#define TIOCM_RI TIOCM_RNG +#define TIOCM_DSR 0x400 /* data set ready */ +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +#ifdef __KERNEL__ + +#include <linux/string.h> + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + unsigned short tmp; \ + get_user(tmp, &(termio)->c_iflag); \ + (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ + get_user(tmp, &(termio)->c_oflag); \ + (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ + get_user(tmp, &(termio)->c_cflag); \ + (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ + get_user(tmp, &(termio)->c_lflag); \ + (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ + get_user((termios)->c_line, &(termio)->c_line); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* defined(__KERNEL__) */ + +#endif /* _ASM_TERMIOS_H */ diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h new file mode 100644 index 000000000000..3f76de73c943 --- /dev/null +++ b/arch/mips/include/asm/thread_info.h @@ -0,0 +1,153 @@ +/* thread_info.h: MIPS low-level thread information + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#ifdef __KERNEL__ + + +#ifndef __ASSEMBLY__ + +#include <asm/processor.h> + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, the assembly constants + * must also be changed + */ +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + unsigned long tp_value; /* thread pointer */ + __u32 cpu; /* current CPU */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ + + mm_segment_t addr_limit; /* thread address space: + 0-0xBFFFFFFF for user-thead + 0-0xFFFFFFFF for kernel-thread + */ + struct restart_block restart_block; + struct pt_regs *regs; +}; + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = _TIF_FIXADE, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* How to get the thread information struct from C. */ +register struct thread_info *__current_thread_info __asm__("$28"); +#define current_thread_info() __current_thread_info + +/* thread information allocation */ +#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_32BIT) +#define THREAD_SIZE_ORDER (1) +#endif +#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_64BIT) +#define THREAD_SIZE_ORDER (2) +#endif +#ifdef CONFIG_PAGE_SIZE_8KB +#define THREAD_SIZE_ORDER (1) +#endif +#ifdef CONFIG_PAGE_SIZE_16KB +#define THREAD_SIZE_ORDER (0) +#endif +#ifdef CONFIG_PAGE_SIZE_64KB +#define THREAD_SIZE_ORDER (0) +#endif + +#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) +#define THREAD_MASK (THREAD_SIZE - 1UL) + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(tsk) \ +({ \ + struct thread_info *ret; \ + \ + ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \ + \ + ret; \ +}) +#else +#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) +#endif + +#define free_thread_info(info) kfree(info) + +#endif /* !__ASSEMBLY__ */ + +#define PREEMPT_ACTIVE 0x10000000 + +/* + * thread information flags + * - these are process state flags that various assembly files may need to + * access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_SYSCALL_AUDIT 3 /* syscall auditing active */ +#define TIF_SECCOMP 4 /* secure computing */ +#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */ +#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ +#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 18 +#define TIF_FREEZE 19 +#define TIF_FIXADE 20 /* Fix address errors in software */ +#define TIF_LOGADE 21 /* Log address errors to syslog */ +#define TIF_32BIT_REGS 22 /* also implies 16/32 fprs */ +#define TIF_32BIT_ADDR 23 /* 32-bit address space (o32/n32) */ +#define TIF_FPUBOUND 24 /* thread bound to FPU-full CPU set */ +#define TIF_LOAD_WATCH 25 /* If set, load watch registers */ +#define TIF_SYSCALL_TRACE 31 /* syscall trace active */ + +#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) +#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT) +#define _TIF_SECCOMP (1<<TIF_SECCOMP) +#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) +#define _TIF_USEDFPU (1<<TIF_USEDFPU) +#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) +#define _TIF_FREEZE (1<<TIF_FREEZE) +#define _TIF_FIXADE (1<<TIF_FIXADE) +#define _TIF_LOGADE (1<<TIF_LOGADE) +#define _TIF_32BIT_REGS (1<<TIF_32BIT_REGS) +#define _TIF_32BIT_ADDR (1<<TIF_32BIT_ADDR) +#define _TIF_FPUBOUND (1<<TIF_FPUBOUND) +#define _TIF_LOAD_WATCH (1<<TIF_LOAD_WATCH) + +/* work to do on interrupt/exception return */ +#define _TIF_WORK_MASK (0x0000ffef & ~_TIF_SECCOMP) +/* work to do on any return to u-space */ +#define _TIF_ALLWORK_MASK (0x8000ffff & ~_TIF_SECCOMP) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_THREAD_INFO_H */ diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h new file mode 100644 index 000000000000..d3bd5c5aa2ec --- /dev/null +++ b/arch/mips/include/asm/time.h @@ -0,0 +1,79 @@ +/* + * Copyright (C) 2001, 2002, MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * Copyright (c) 2003 Maciej W. Rozycki + * + * include/asm-mips/time.h + * header file for the new style time.c file and time services. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_TIME_H +#define _ASM_TIME_H + +#include <linux/rtc.h> +#include <linux/spinlock.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> + +extern spinlock_t rtc_lock; + +/* + * RTC ops. By default, they point to weak no-op RTC functions. + * rtc_mips_set_time - reverse the above translation and set time to RTC. + * rtc_mips_set_mmss - similar to rtc_set_time, but only min and sec need + * to be set. Used by RTC sync-up. + */ +extern int rtc_mips_set_time(unsigned long); +extern int rtc_mips_set_mmss(unsigned long); + +/* + * board specific routines required by time_init(). + */ +extern void plat_time_init(void); + +/* + * mips_hpt_frequency - must be set if you intend to use an R4k-compatible + * counter as a timer interrupt source. + */ +extern unsigned int mips_hpt_frequency; + +/* + * The performance counter IRQ on MIPS is a close relative to the timer IRQ + * so it lives here. + */ +extern int (*perf_irq)(void); + +/* + * Initialize the calling CPU's compare interrupt as clockevent device + */ +#ifdef CONFIG_CEVT_R4K +extern int mips_clockevent_init(void); +extern unsigned int __weak get_c0_compare_int(void); +#else +static inline int mips_clockevent_init(void) +{ + return -ENXIO; +} +#endif + +/* + * Initialize the count register as a clocksource + */ +#ifdef CONFIG_CEVT_R4K +extern int init_mips_clocksource(void); +#else +static inline int init_mips_clocksource(void) +{ + return 0; +} +#endif + +extern void clocksource_set_clock(struct clocksource *cs, unsigned int clock); +extern void clockevent_set_clock(struct clock_event_device *cd, + unsigned int clock); + +#endif /* _ASM_TIME_H */ diff --git a/arch/mips/include/asm/timex.h b/arch/mips/include/asm/timex.h new file mode 100644 index 000000000000..6529704aa73a --- /dev/null +++ b/arch/mips/include/asm/timex.h @@ -0,0 +1,43 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 1999, 2003 by Ralf Baechle + */ +#ifndef _ASM_TIMEX_H +#define _ASM_TIMEX_H + +#ifdef __KERNEL__ + +#include <asm/mipsregs.h> + +/* + * This is the clock rate of the i8253 PIT. A MIPS system may not have + * a PIT by the symbol is used all over the kernel including some APIs. + * So keeping it defined to the number for the PIT is the only sane thing + * for now. + */ +#define CLOCK_TICK_RATE 1193182 + +/* + * Standard way to access the cycle counter. + * Currently only used on SMP for scheduling. + * + * Only the low 32 bits are available as a continuously counting entity. + * But this only means we'll force a reschedule every 8 seconds or so, + * which isn't an evil thing. + * + * We know that all SMP capable CPUs have cycle counters. + */ + +typedef unsigned int cycles_t; + +static inline cycles_t get_cycles(void) +{ + return 0; +} + +#endif /* __KERNEL__ */ + +#endif /* _ASM_TIMEX_H */ diff --git a/arch/mips/include/asm/titan_dep.h b/arch/mips/include/asm/titan_dep.h new file mode 100644 index 000000000000..fee1908c65d2 --- /dev/null +++ b/arch/mips/include/asm/titan_dep.h @@ -0,0 +1,231 @@ +/* + * Copyright 2003 PMC-Sierra + * Author: Manish Lachwani (lachwani@pmc-sierra.com) + * + * Board specific definititions for the PMC-Sierra Yosemite + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __TITAN_DEP_H__ +#define __TITAN_DEP_H__ + +#include <asm/addrspace.h> /* for KSEG1ADDR() */ +#include <asm/byteorder.h> /* for cpu_to_le32() */ + +#define TITAN_READ(ofs) \ + (*(volatile u32 *)(ocd_base+(ofs))) +#define TITAN_READ_16(ofs) \ + (*(volatile u16 *)(ocd_base+(ofs))) +#define TITAN_READ_8(ofs) \ + (*(volatile u8 *)(ocd_base+(ofs))) + +#define TITAN_WRITE(ofs, data) \ + do { *(volatile u32 *)(ocd_base+(ofs)) = (data); } while (0) +#define TITAN_WRITE_16(ofs, data) \ + do { *(volatile u16 *)(ocd_base+(ofs)) = (data); } while (0) +#define TITAN_WRITE_8(ofs, data) \ + do { *(volatile u8 *)(ocd_base+(ofs)) = (data); } while (0) + +/* + * PCI specific defines + */ +#define TITAN_PCI_0_CONFIG_ADDRESS 0x780 +#define TITAN_PCI_0_CONFIG_DATA 0x784 + +/* + * HT specific defines + */ +#define RM9000x2_HTLINK_REG 0xbb000644 +#define RM9000x2_BASE_ADDR 0xbb000000 + +#define OCD_BASE 0xfb000000UL +#define OCD_SIZE 0x3000UL + +extern unsigned long ocd_base; + +/* + * OCD Registers + */ +#define RM9000x2_OCD_LKB5 0x0128 /* Ethernet */ +#define RM9000x2_OCD_LKM5 0x012c + +#define RM9000x2_OCD_LKB7 0x0138 /* HT Region 0 */ +#define RM9000x2_OCD_LKM7 0x013c +#define RM9000x2_OCD_LKB8 0x0140 /* HT Region 1 */ +#define RM9000x2_OCD_LKM8 0x0144 + +#define RM9000x2_OCD_LKB9 0x0148 /* Local Bus */ +#define RM9000x2_OCD_LKM9 0x014c +#define RM9000x2_OCD_LKB10 0x0150 +#define RM9000x2_OCD_LKM10 0x0154 +#define RM9000x2_OCD_LKB11 0x0158 +#define RM9000x2_OCD_LKM11 0x015c +#define RM9000x2_OCD_LKB12 0x0160 +#define RM9000x2_OCD_LKM12 0x0164 + +#define RM9000x2_OCD_LKB13 0x0168 /* Scratch RAM */ +#define RM9000x2_OCD_LKM13 0x016c + +#define RM9000x2_OCD_LPD0 0x0200 /* Local Bus */ +#define RM9000x2_OCD_LPD1 0x0210 +#define RM9000x2_OCD_LPD2 0x0220 +#define RM9000x2_OCD_LPD3 0x0230 + +#define RM9000x2_OCD_HTDVID 0x0600 /* HT Device Header */ +#define RM9000x2_OCD_HTSC 0x0604 +#define RM9000x2_OCD_HTCCR 0x0608 +#define RM9000x2_OCD_HTBHL 0x060c +#define RM9000x2_OCD_HTBAR0 0x0610 +#define RM9000x2_OCD_HTBAR1 0x0614 +#define RM9000x2_OCD_HTBAR2 0x0618 +#define RM9000x2_OCD_HTBAR3 0x061c +#define RM9000x2_OCD_HTBAR4 0x0620 +#define RM9000x2_OCD_HTBAR5 0x0624 +#define RM9000x2_OCD_HTCBCPT 0x0628 +#define RM9000x2_OCD_HTSDVID 0x062c +#define RM9000x2_OCD_HTXRA 0x0630 +#define RM9000x2_OCD_HTCAP1 0x0634 +#define RM9000x2_OCD_HTIL 0x063c + +#define RM9000x2_OCD_HTLCC 0x0640 /* HT Capability Block */ +#define RM9000x2_OCD_HTLINK 0x0644 +#define RM9000x2_OCD_HTFQREV 0x0648 + +#define RM9000x2_OCD_HTERCTL 0x0668 /* HT Controller */ +#define RM9000x2_OCD_HTRXDB 0x066c +#define RM9000x2_OCD_HTIMPED 0x0670 +#define RM9000x2_OCD_HTSWIMP 0x0674 +#define RM9000x2_OCD_HTCAL 0x0678 + +#define RM9000x2_OCD_HTBAA30 0x0680 +#define RM9000x2_OCD_HTBAA54 0x0684 +#define RM9000x2_OCD_HTMASK0 0x0688 +#define RM9000x2_OCD_HTMASK1 0x068c +#define RM9000x2_OCD_HTMASK2 0x0690 +#define RM9000x2_OCD_HTMASK3 0x0694 +#define RM9000x2_OCD_HTMASK4 0x0698 +#define RM9000x2_OCD_HTMASK5 0x069c + +#define RM9000x2_OCD_HTIFCTL 0x06a0 +#define RM9000x2_OCD_HTPLL 0x06a4 + +#define RM9000x2_OCD_HTSRI 0x06b0 +#define RM9000x2_OCD_HTRXNUM 0x06b4 +#define RM9000x2_OCD_HTTXNUM 0x06b8 + +#define RM9000x2_OCD_HTTXCNT 0x06c8 + +#define RM9000x2_OCD_HTERROR 0x06d8 +#define RM9000x2_OCD_HTRCRCE 0x06dc +#define RM9000x2_OCD_HTEOI 0x06e0 + +#define RM9000x2_OCD_CRCR 0x06f0 + +#define RM9000x2_OCD_HTCFGA 0x06f8 +#define RM9000x2_OCD_HTCFGD 0x06fc + +#define RM9000x2_OCD_INTMSG 0x0a00 + +#define RM9000x2_OCD_INTPIN0 0x0a40 +#define RM9000x2_OCD_INTPIN1 0x0a44 +#define RM9000x2_OCD_INTPIN2 0x0a48 +#define RM9000x2_OCD_INTPIN3 0x0a4c +#define RM9000x2_OCD_INTPIN4 0x0a50 +#define RM9000x2_OCD_INTPIN5 0x0a54 +#define RM9000x2_OCD_INTPIN6 0x0a58 +#define RM9000x2_OCD_INTPIN7 0x0a5c +#define RM9000x2_OCD_SEM 0x0a60 +#define RM9000x2_OCD_SEMSET 0x0a64 +#define RM9000x2_OCD_SEMCLR 0x0a68 + +#define RM9000x2_OCD_TKT 0x0a70 +#define RM9000x2_OCD_TKTINC 0x0a74 + +#define RM9000x2_OCD_NMICONFIG 0x0ac0 /* Interrupts */ +#define RM9000x2_OCD_INTP0PRI 0x1a80 +#define RM9000x2_OCD_INTP1PRI 0x1a80 +#define RM9000x2_OCD_INTP0STATUS0 0x1b00 +#define RM9000x2_OCD_INTP0MASK0 0x1b04 +#define RM9000x2_OCD_INTP0SET0 0x1b08 +#define RM9000x2_OCD_INTP0CLEAR0 0x1b0c +#define RM9000x2_OCD_INTP0STATUS1 0x1b10 +#define RM9000x2_OCD_INTP0MASK1 0x1b14 +#define RM9000x2_OCD_INTP0SET1 0x1b18 +#define RM9000x2_OCD_INTP0CLEAR1 0x1b1c +#define RM9000x2_OCD_INTP0STATUS2 0x1b20 +#define RM9000x2_OCD_INTP0MASK2 0x1b24 +#define RM9000x2_OCD_INTP0SET2 0x1b28 +#define RM9000x2_OCD_INTP0CLEAR2 0x1b2c +#define RM9000x2_OCD_INTP0STATUS3 0x1b30 +#define RM9000x2_OCD_INTP0MASK3 0x1b34 +#define RM9000x2_OCD_INTP0SET3 0x1b38 +#define RM9000x2_OCD_INTP0CLEAR3 0x1b3c +#define RM9000x2_OCD_INTP0STATUS4 0x1b40 +#define RM9000x2_OCD_INTP0MASK4 0x1b44 +#define RM9000x2_OCD_INTP0SET4 0x1b48 +#define RM9000x2_OCD_INTP0CLEAR4 0x1b4c +#define RM9000x2_OCD_INTP0STATUS5 0x1b50 +#define RM9000x2_OCD_INTP0MASK5 0x1b54 +#define RM9000x2_OCD_INTP0SET5 0x1b58 +#define RM9000x2_OCD_INTP0CLEAR5 0x1b5c +#define RM9000x2_OCD_INTP0STATUS6 0x1b60 +#define RM9000x2_OCD_INTP0MASK6 0x1b64 +#define RM9000x2_OCD_INTP0SET6 0x1b68 +#define RM9000x2_OCD_INTP0CLEAR6 0x1b6c +#define RM9000x2_OCD_INTP0STATUS7 0x1b70 +#define RM9000x2_OCD_INTP0MASK7 0x1b74 +#define RM9000x2_OCD_INTP0SET7 0x1b78 +#define RM9000x2_OCD_INTP0CLEAR7 0x1b7c +#define RM9000x2_OCD_INTP1STATUS0 0x2b00 +#define RM9000x2_OCD_INTP1MASK0 0x2b04 +#define RM9000x2_OCD_INTP1SET0 0x2b08 +#define RM9000x2_OCD_INTP1CLEAR0 0x2b0c +#define RM9000x2_OCD_INTP1STATUS1 0x2b10 +#define RM9000x2_OCD_INTP1MASK1 0x2b14 +#define RM9000x2_OCD_INTP1SET1 0x2b18 +#define RM9000x2_OCD_INTP1CLEAR1 0x2b1c +#define RM9000x2_OCD_INTP1STATUS2 0x2b20 +#define RM9000x2_OCD_INTP1MASK2 0x2b24 +#define RM9000x2_OCD_INTP1SET2 0x2b28 +#define RM9000x2_OCD_INTP1CLEAR2 0x2b2c +#define RM9000x2_OCD_INTP1STATUS3 0x2b30 +#define RM9000x2_OCD_INTP1MASK3 0x2b34 +#define RM9000x2_OCD_INTP1SET3 0x2b38 +#define RM9000x2_OCD_INTP1CLEAR3 0x2b3c +#define RM9000x2_OCD_INTP1STATUS4 0x2b40 +#define RM9000x2_OCD_INTP1MASK4 0x2b44 +#define RM9000x2_OCD_INTP1SET4 0x2b48 +#define RM9000x2_OCD_INTP1CLEAR4 0x2b4c +#define RM9000x2_OCD_INTP1STATUS5 0x2b50 +#define RM9000x2_OCD_INTP1MASK5 0x2b54 +#define RM9000x2_OCD_INTP1SET5 0x2b58 +#define RM9000x2_OCD_INTP1CLEAR5 0x2b5c +#define RM9000x2_OCD_INTP1STATUS6 0x2b60 +#define RM9000x2_OCD_INTP1MASK6 0x2b64 +#define RM9000x2_OCD_INTP1SET6 0x2b68 +#define RM9000x2_OCD_INTP1CLEAR6 0x2b6c +#define RM9000x2_OCD_INTP1STATUS7 0x2b70 +#define RM9000x2_OCD_INTP1MASK7 0x2b74 +#define RM9000x2_OCD_INTP1SET7 0x2b78 +#define RM9000x2_OCD_INTP1CLEAR7 0x2b7c + +#define OCD_READ(reg) (*(volatile unsigned int *)(ocd_base + (reg))) +#define OCD_WRITE(reg, val) \ + do { *(volatile unsigned int *)(ocd_base + (reg)) = (val); } while (0) + +/* + * Hypertransport specific macros + */ +#define RM9K_WRITE(ofs, data) *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs) = data +#define RM9K_WRITE_8(ofs, data) *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs) = data +#define RM9K_WRITE_16(ofs, data) *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs) = data + +#define RM9K_READ(ofs, val) *(val) = *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs) +#define RM9K_READ_8(ofs, val) *(val) = *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs) +#define RM9K_READ_16(ofs, val) *(val) = *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs) + +#endif diff --git a/arch/mips/include/asm/tlb.h b/arch/mips/include/asm/tlb.h new file mode 100644 index 000000000000..80d9dfcf1e88 --- /dev/null +++ b/arch/mips/include/asm/tlb.h @@ -0,0 +1,23 @@ +#ifndef __ASM_TLB_H +#define __ASM_TLB_H + +/* + * MIPS doesn't need any special per-pte or per-vma handling, except + * we need to flush cache for area to be unmapped. + */ +#define tlb_start_vma(tlb, vma) \ + do { \ + if (!tlb->fullmm) \ + flush_cache_range(vma, vma->vm_start, vma->vm_end); \ + } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) + +/* + * .. because we flush the whole mm when it fills up. + */ +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#include <asm-generic/tlb.h> + +#endif /* __ASM_TLB_H */ diff --git a/arch/mips/include/asm/tlbdebug.h b/arch/mips/include/asm/tlbdebug.h new file mode 100644 index 000000000000..bb8f5c29c3d9 --- /dev/null +++ b/arch/mips/include/asm/tlbdebug.h @@ -0,0 +1,16 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002 by Ralf Baechle + */ +#ifndef __ASM_TLBDEBUG_H +#define __ASM_TLBDEBUG_H + +/* + * TLB debugging functions: + */ +extern void dump_tlb_all(void); + +#endif /* __ASM_TLBDEBUG_H */ diff --git a/arch/mips/include/asm/tlbflush.h b/arch/mips/include/asm/tlbflush.h new file mode 100644 index 000000000000..86b21de12e91 --- /dev/null +++ b/arch/mips/include/asm/tlbflush.h @@ -0,0 +1,47 @@ +#ifndef __ASM_TLBFLUSH_H +#define __ASM_TLBFLUSH_H + +#include <linux/mm.h> + +/* + * TLB flushing: + * + * - flush_tlb_all() flushes all processes TLB entries + * - flush_tlb_mm(mm) flushes the specified mm context TLB entries + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + */ +extern void local_flush_tlb_all(void); +extern void local_flush_tlb_mm(struct mm_struct *mm); +extern void local_flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end); +extern void local_flush_tlb_kernel_range(unsigned long start, + unsigned long end); +extern void local_flush_tlb_page(struct vm_area_struct *vma, + unsigned long page); +extern void local_flush_tlb_one(unsigned long vaddr); + +#ifdef CONFIG_SMP + +extern void flush_tlb_all(void); +extern void flush_tlb_mm(struct mm_struct *); +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long, + unsigned long); +extern void flush_tlb_kernel_range(unsigned long, unsigned long); +extern void flush_tlb_page(struct vm_area_struct *, unsigned long); +extern void flush_tlb_one(unsigned long vaddr); + +#else /* CONFIG_SMP */ + +#define flush_tlb_all() local_flush_tlb_all() +#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) +#define flush_tlb_range(vma, vmaddr, end) local_flush_tlb_range(vma, vmaddr, end) +#define flush_tlb_kernel_range(vmaddr,end) \ + local_flush_tlb_kernel_range(vmaddr, end) +#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page) +#define flush_tlb_one(vaddr) local_flush_tlb_one(vaddr) + +#endif /* CONFIG_SMP */ + +#endif /* __ASM_TLBFLUSH_H */ diff --git a/arch/mips/include/asm/topology.h b/arch/mips/include/asm/topology.h new file mode 100644 index 000000000000..259145e07e97 --- /dev/null +++ b/arch/mips/include/asm/topology.h @@ -0,0 +1,17 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 by Ralf Baechle + */ +#ifndef __ASM_TOPOLOGY_H +#define __ASM_TOPOLOGY_H + +#include <topology.h> + +#ifdef CONFIG_SMP +#define smt_capable() (smp_num_siblings > 1) +#endif + +#endif /* __ASM_TOPOLOGY_H */ diff --git a/arch/mips/include/asm/traps.h b/arch/mips/include/asm/traps.h new file mode 100644 index 000000000000..90ff2f497c50 --- /dev/null +++ b/arch/mips/include/asm/traps.h @@ -0,0 +1,28 @@ +/* + * Trap handling definitions. + * + * Copyright (C) 2002, 2003 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_TRAPS_H +#define _ASM_TRAPS_H + +/* + * Possible status responses for a board_be_handler backend. + */ +#define MIPS_BE_DISCARD 0 /* return with no action */ +#define MIPS_BE_FIXUP 1 /* return to the fixup code */ +#define MIPS_BE_FATAL 2 /* treat as an unrecoverable error */ + +extern void (*board_be_init)(void); +extern int (*board_be_handler)(struct pt_regs *regs, int is_fixup); + +extern void (*board_nmi_handler_setup)(void); +extern void (*board_ejtag_handler_setup)(void); +extern void (*board_bind_eic_interrupt)(int irq, int regset); + +#endif /* _ASM_TRAPS_H */ diff --git a/arch/mips/include/asm/txx9/boards.h b/arch/mips/include/asm/txx9/boards.h new file mode 100644 index 000000000000..cbe9476d963e --- /dev/null +++ b/arch/mips/include/asm/txx9/boards.h @@ -0,0 +1,13 @@ +#ifdef CONFIG_TOSHIBA_JMR3927 +BOARD_VEC(jmr3927_vec) +#endif +#ifdef CONFIG_TOSHIBA_RBTX4927 +BOARD_VEC(rbtx4927_vec) +BOARD_VEC(rbtx4937_vec) +#endif +#ifdef CONFIG_TOSHIBA_RBTX4938 +BOARD_VEC(rbtx4938_vec) +#endif +#ifdef CONFIG_TOSHIBA_RBTX4939 +BOARD_VEC(rbtx4939_vec) +#endif diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h new file mode 100644 index 000000000000..4316a3e57678 --- /dev/null +++ b/arch/mips/include/asm/txx9/generic.h @@ -0,0 +1,89 @@ +/* + * linux/include/asm-mips/txx9/generic.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9_GENERIC_H +#define __ASM_TXX9_GENERIC_H + +#include <linux/init.h> +#include <linux/ioport.h> /* for struct resource */ + +extern struct resource txx9_ce_res[]; +#define TXX9_CE(n) (unsigned long)(txx9_ce_res[(n)].start) +extern unsigned int txx9_pcode; +extern char txx9_pcode_str[8]; +void txx9_reg_res_init(unsigned int pcode, unsigned long base, + unsigned long size); + +extern unsigned int txx9_master_clock; +extern unsigned int txx9_cpu_clock; +extern unsigned int txx9_gbus_clock; +#define TXX9_IMCLK (txx9_gbus_clock / 2) + +extern int txx9_ccfg_toeon; +struct uart_port; +int early_serial_txx9_setup(struct uart_port *port); + +struct pci_dev; +struct txx9_board_vec { + const char *system; + void (*prom_init)(void); + void (*mem_setup)(void); + void (*irq_setup)(void); + void (*time_init)(void); + void (*arch_init)(void); + void (*device_init)(void); +#ifdef CONFIG_PCI + int (*pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin); +#endif +}; +extern struct txx9_board_vec *txx9_board_vec; +extern int (*txx9_irq_dispatch)(int pending); +char *prom_getcmdline(void); +const char *prom_getenv(const char *name); +void txx9_wdt_init(unsigned long base); +void txx9_wdt_now(unsigned long base); +void txx9_spi_init(int busid, unsigned long base, int irq); +void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr); +void txx9_sio_init(unsigned long baseaddr, int irq, + unsigned int line, unsigned int sclk, int nocts); +void prom_putchar(char c); +#ifdef CONFIG_EARLY_PRINTK +extern void (*txx9_prom_putchar)(char c); +void txx9_sio_putchar_init(unsigned long baseaddr); +#else +static inline void txx9_sio_putchar_init(unsigned long baseaddr) +{ +} +#endif + +struct physmap_flash_data; +void txx9_physmap_flash_init(int no, unsigned long addr, unsigned long size, + const struct physmap_flash_data *pdata); + +/* 8 bit version of __fls(): find first bit set (returns 0..7) */ +static inline unsigned int __fls8(unsigned char x) +{ + int r = 7; + + if (!(x & 0xf0)) { + r -= 4; + x <<= 4; + } + if (!(x & 0xc0)) { + r -= 2; + x <<= 2; + } + if (!(x & 0x80)) + r -= 1; + return r; +} + +void txx9_iocled_init(unsigned long baseaddr, + int basenum, unsigned int num, int lowactive, + const char *color, char **deftriggers); + +#endif /* __ASM_TXX9_GENERIC_H */ diff --git a/arch/mips/include/asm/txx9/jmr3927.h b/arch/mips/include/asm/txx9/jmr3927.h new file mode 100644 index 000000000000..a409c446bf18 --- /dev/null +++ b/arch/mips/include/asm/txx9/jmr3927.h @@ -0,0 +1,180 @@ +/* + * Defines for the TJSYS JMR-TX3927 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000-2001 Toshiba Corporation + */ +#ifndef __ASM_TXX9_JMR3927_H +#define __ASM_TXX9_JMR3927_H + +#include <asm/txx9/tx3927.h> +#include <asm/addrspace.h> +#include <asm/system.h> +#include <asm/txx9irq.h> + +/* CS */ +#define JMR3927_ROMCE0 0x1fc00000 /* 4M */ +#define JMR3927_ROMCE1 0x1e000000 /* 4M */ +#define JMR3927_ROMCE2 0x14000000 /* 16M */ +#define JMR3927_ROMCE3 0x10000000 /* 64M */ +#define JMR3927_ROMCE5 0x1d000000 /* 4M */ +#define JMR3927_SDCS0 0x00000000 /* 32M */ +#define JMR3927_SDCS1 0x02000000 /* 32M */ +/* PCI Direct Mappings */ + +#define JMR3927_PCIMEM 0x08000000 +#define JMR3927_PCIMEM_SIZE 0x08000000 /* 128M */ +#define JMR3927_PCIIO 0x15000000 +#define JMR3927_PCIIO_SIZE 0x01000000 /* 16M */ + +#define JMR3927_SDRAM_SIZE 0x02000000 /* 32M */ +#define JMR3927_PORT_BASE KSEG1 + +/* Address map (virtual address) */ +#define JMR3927_ROM0_BASE (KSEG1 + JMR3927_ROMCE0) +#define JMR3927_ROM1_BASE (KSEG1 + JMR3927_ROMCE1) +#define JMR3927_IOC_BASE (KSEG1 + JMR3927_ROMCE2) +#define JMR3927_PCIMEM_BASE (KSEG1 + JMR3927_PCIMEM) +#define JMR3927_PCIIO_BASE (KSEG1 + JMR3927_PCIIO) + +#define JMR3927_IOC_REV_ADDR (JMR3927_IOC_BASE + 0x00000000) +#define JMR3927_IOC_NVRAMB_ADDR (JMR3927_IOC_BASE + 0x00010000) +#define JMR3927_IOC_LED_ADDR (JMR3927_IOC_BASE + 0x00020000) +#define JMR3927_IOC_DIPSW_ADDR (JMR3927_IOC_BASE + 0x00030000) +#define JMR3927_IOC_BREV_ADDR (JMR3927_IOC_BASE + 0x00040000) +#define JMR3927_IOC_DTR_ADDR (JMR3927_IOC_BASE + 0x00050000) +#define JMR3927_IOC_INTS1_ADDR (JMR3927_IOC_BASE + 0x00080000) +#define JMR3927_IOC_INTS2_ADDR (JMR3927_IOC_BASE + 0x00090000) +#define JMR3927_IOC_INTM_ADDR (JMR3927_IOC_BASE + 0x000a0000) +#define JMR3927_IOC_INTP_ADDR (JMR3927_IOC_BASE + 0x000b0000) +#define JMR3927_IOC_RESET_ADDR (JMR3927_IOC_BASE + 0x000f0000) + +/* Flash ROM */ +#define JMR3927_FLASH_BASE (JMR3927_ROM0_BASE) +#define JMR3927_FLASH_SIZE 0x00400000 + +/* bits for IOC_REV/IOC_BREV (high byte) */ +#define JMR3927_IDT_MASK 0xfc +#define JMR3927_REV_MASK 0x03 +#define JMR3927_IOC_IDT 0xe0 + +/* bits for IOC_INTS1/IOC_INTS2/IOC_INTM/IOC_INTP (high byte) */ +#define JMR3927_IOC_INTB_PCIA 0 +#define JMR3927_IOC_INTB_PCIB 1 +#define JMR3927_IOC_INTB_PCIC 2 +#define JMR3927_IOC_INTB_PCID 3 +#define JMR3927_IOC_INTB_MODEM 4 +#define JMR3927_IOC_INTB_INT6 5 +#define JMR3927_IOC_INTB_INT7 6 +#define JMR3927_IOC_INTB_SOFT 7 +#define JMR3927_IOC_INTF_PCIA (1 << JMR3927_IOC_INTF_PCIA) +#define JMR3927_IOC_INTF_PCIB (1 << JMR3927_IOC_INTB_PCIB) +#define JMR3927_IOC_INTF_PCIC (1 << JMR3927_IOC_INTB_PCIC) +#define JMR3927_IOC_INTF_PCID (1 << JMR3927_IOC_INTB_PCID) +#define JMR3927_IOC_INTF_MODEM (1 << JMR3927_IOC_INTB_MODEM) +#define JMR3927_IOC_INTF_INT6 (1 << JMR3927_IOC_INTB_INT6) +#define JMR3927_IOC_INTF_INT7 (1 << JMR3927_IOC_INTB_INT7) +#define JMR3927_IOC_INTF_SOFT (1 << JMR3927_IOC_INTB_SOFT) + +/* bits for IOC_RESET (high byte) */ +#define JMR3927_IOC_RESET_CPU 1 +#define JMR3927_IOC_RESET_PCI 2 + +#if defined(__BIG_ENDIAN) +#define jmr3927_ioc_reg_out(d, a) ((*(volatile unsigned char *)(a)) = (d)) +#define jmr3927_ioc_reg_in(a) (*(volatile unsigned char *)(a)) +#elif defined(__LITTLE_ENDIAN) +#define jmr3927_ioc_reg_out(d, a) ((*(volatile unsigned char *)((a)^1)) = (d)) +#define jmr3927_ioc_reg_in(a) (*(volatile unsigned char *)((a)^1)) +#else +#error "No Endian" +#endif + +/* LED macro */ +#define jmr3927_led_set(n/*0-16*/) jmr3927_ioc_reg_out(~(n), JMR3927_IOC_LED_ADDR) + +#define jmr3927_led_and_set(n/*0-16*/) jmr3927_ioc_reg_out((~(n)) & jmr3927_ioc_reg_in(JMR3927_IOC_LED_ADDR), JMR3927_IOC_LED_ADDR) + +/* DIPSW4 macro */ +#define jmr3927_dipsw1() (gpio_get_value(11) == 0) +#define jmr3927_dipsw2() (gpio_get_value(10) == 0) +#define jmr3927_dipsw3() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 2) == 0) +#define jmr3927_dipsw4() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 1) == 0) + +/* + * IRQ mappings + */ + +/* These are the virtual IRQ numbers, we divide all IRQ's into + * 'spaces', the 'space' determines where and how to enable/disable + * that particular IRQ on an JMR machine. Add new 'spaces' as new + * IRQ hardware is supported. + */ +#define JMR3927_NR_IRQ_IRC 16 /* On-Chip IRC */ +#define JMR3927_NR_IRQ_IOC 8 /* PCI/MODEM/INT[6:7] */ + +#define JMR3927_IRQ_IRC TXX9_IRQ_BASE +#define JMR3927_IRQ_IOC (JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC) +#define JMR3927_IRQ_END (JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC) + +#define JMR3927_IRQ_IRC_INT0 (JMR3927_IRQ_IRC + TX3927_IR_INT0) +#define JMR3927_IRQ_IRC_INT1 (JMR3927_IRQ_IRC + TX3927_IR_INT1) +#define JMR3927_IRQ_IRC_INT2 (JMR3927_IRQ_IRC + TX3927_IR_INT2) +#define JMR3927_IRQ_IRC_INT3 (JMR3927_IRQ_IRC + TX3927_IR_INT3) +#define JMR3927_IRQ_IRC_INT4 (JMR3927_IRQ_IRC + TX3927_IR_INT4) +#define JMR3927_IRQ_IRC_INT5 (JMR3927_IRQ_IRC + TX3927_IR_INT5) +#define JMR3927_IRQ_IRC_SIO0 (JMR3927_IRQ_IRC + TX3927_IR_SIO0) +#define JMR3927_IRQ_IRC_SIO1 (JMR3927_IRQ_IRC + TX3927_IR_SIO1) +#define JMR3927_IRQ_IRC_SIO(ch) (JMR3927_IRQ_IRC + TX3927_IR_SIO(ch)) +#define JMR3927_IRQ_IRC_DMA (JMR3927_IRQ_IRC + TX3927_IR_DMA) +#define JMR3927_IRQ_IRC_PIO (JMR3927_IRQ_IRC + TX3927_IR_PIO) +#define JMR3927_IRQ_IRC_PCI (JMR3927_IRQ_IRC + TX3927_IR_PCI) +#define JMR3927_IRQ_IRC_TMR(ch) (JMR3927_IRQ_IRC + TX3927_IR_TMR(ch)) +#define JMR3927_IRQ_IOC_PCIA (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIA) +#define JMR3927_IRQ_IOC_PCIB (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIB) +#define JMR3927_IRQ_IOC_PCIC (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIC) +#define JMR3927_IRQ_IOC_PCID (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCID) +#define JMR3927_IRQ_IOC_MODEM (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_MODEM) +#define JMR3927_IRQ_IOC_INT6 (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT6) +#define JMR3927_IRQ_IOC_INT7 (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT7) +#define JMR3927_IRQ_IOC_SOFT (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_SOFT) + +/* IOC (PCI, MODEM) */ +#define JMR3927_IRQ_IOCINT JMR3927_IRQ_IRC_INT1 +/* TC35815 100M Ether (JMR-TX3912:JPW4:2-3 Short) */ +#define JMR3927_IRQ_ETHER0 JMR3927_IRQ_IRC_INT3 + +/* Clocks */ +#define JMR3927_CORECLK 132710400 /* 132.7MHz */ + +/* + * TX3927 Pin Configuration: + * + * PCFG bits Avail Dead + * SELSIO[1:0]:11 RXD[1:0], TXD[1:0] PIO[6:3] + * SELSIOC[0]:1 CTS[0], RTS[0] INT[5:4] + * SELSIOC[1]:0,SELDSF:0, GSDAO[0],GPCST[3] CTS[1], RTS[1],DSF, + * GDBGE* PIO[2:1] + * SELDMA[2]:1 DMAREQ[2],DMAACK[2] PIO[13:12] + * SELTMR[2:0]:000 TIMER[1:0] + * SELCS:0,SELDMA[1]:0 PIO[11;10] SDCS_CE[7:6], + * DMAREQ[1],DMAACK[1] + * SELDMA[0]:1 DMAREQ[0],DMAACK[0] PIO[9:8] + * SELDMA[3]:1 DMAREQ[3],DMAACK[3] PIO[15:14] + * SELDONE:1 DMADONE PIO[7] + * + * Usable pins are: + * RXD[1;0],TXD[1:0],CTS[0],RTS[0], + * DMAREQ[0,2,3],DMAACK[0,2,3],DMADONE,PIO[0,10,11] + * INT[3:0] + */ + +void jmr3927_prom_init(void); +void jmr3927_irq_setup(void); +struct pci_dev; +int jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); + +#endif /* __ASM_TXX9_JMR3927_H */ diff --git a/arch/mips/include/asm/txx9/pci.h b/arch/mips/include/asm/txx9/pci.h new file mode 100644 index 000000000000..3d32529060aa --- /dev/null +++ b/arch/mips/include/asm/txx9/pci.h @@ -0,0 +1,39 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9_PCI_H +#define __ASM_TXX9_PCI_H + +#include <linux/pci.h> + +extern struct pci_controller txx9_primary_pcic; +struct pci_controller * +txx9_alloc_pci_controller(struct pci_controller *pcic, + unsigned long mem_base, unsigned long mem_size, + unsigned long io_base, unsigned long io_size); + +int txx9_pci66_check(struct pci_controller *hose, int top_bus, + int current_bus); +extern int txx9_pci_mem_high __initdata; + +extern int txx9_pci_option; +#define TXX9_PCI_OPT_PICMG 0x0002 +#define TXX9_PCI_OPT_CLK_33 0x0008 +#define TXX9_PCI_OPT_CLK_66 0x0010 +#define TXX9_PCI_OPT_CLK_MASK \ + (TXX9_PCI_OPT_CLK_33 | TXX9_PCI_OPT_CLK_66) +#define TXX9_PCI_OPT_CLK_AUTO TXX9_PCI_OPT_CLK_MASK + +enum txx9_pci_err_action { + TXX9_PCI_ERR_REPORT, + TXX9_PCI_ERR_IGNORE, + TXX9_PCI_ERR_PANIC, +}; +extern enum txx9_pci_err_action txx9_pci_err_action; + +extern char * (*txx9_board_pcibios_setup)(char *str); +char *txx9_pcibios_setup(char *str); + +#endif /* __ASM_TXX9_PCI_H */ diff --git a/arch/mips/include/asm/txx9/rbtx4927.h b/arch/mips/include/asm/txx9/rbtx4927.h new file mode 100644 index 000000000000..b2adab3d1acc --- /dev/null +++ b/arch/mips/include/asm/txx9/rbtx4927.h @@ -0,0 +1,92 @@ +/* + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_TXX9_RBTX4927_H +#define __ASM_TXX9_RBTX4927_H + +#include <asm/txx9/tx4927.h> + +#define RBTX4927_PCIMEM 0x08000000 +#define RBTX4927_PCIMEM_SIZE 0x08000000 +#define RBTX4927_PCIIO 0x16000000 +#define RBTX4927_PCIIO_SIZE 0x01000000 + +#define RBTX4927_LED_ADDR (IO_BASE + TXX9_CE(2) + 0x00001000) +#define RBTX4927_IMASK_ADDR (IO_BASE + TXX9_CE(2) + 0x00002000) +#define RBTX4927_IMSTAT_ADDR (IO_BASE + TXX9_CE(2) + 0x00002006) +#define RBTX4927_SOFTINT_ADDR (IO_BASE + TXX9_CE(2) + 0x00003000) +#define RBTX4927_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f000) +#define RBTX4927_SOFTRESETLOCK_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f002) +#define RBTX4927_PCIRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f006) +#define RBTX4927_BRAMRTC_BASE (IO_BASE + TXX9_CE(2) + 0x00010000) +#define RBTX4927_ETHER_BASE (IO_BASE + TXX9_CE(2) + 0x00020000) + +/* Ethernet port address */ +#define RBTX4927_ETHER_ADDR (RBTX4927_ETHER_BASE + 0x280) + +#define rbtx4927_imask_addr ((__u8 __iomem *)RBTX4927_IMASK_ADDR) +#define rbtx4927_imstat_addr ((__u8 __iomem *)RBTX4927_IMSTAT_ADDR) +#define rbtx4927_softint_addr ((__u8 __iomem *)RBTX4927_SOFTINT_ADDR) +#define rbtx4927_softreset_addr ((__u8 __iomem *)RBTX4927_SOFTRESET_ADDR) +#define rbtx4927_softresetlock_addr \ + ((__u8 __iomem *)RBTX4927_SOFTRESETLOCK_ADDR) +#define rbtx4927_pcireset_addr ((__u8 __iomem *)RBTX4927_PCIRESET_ADDR) + +/* bits for ISTAT/IMASK/IMSTAT */ +#define RBTX4927_INTB_PCID 0 +#define RBTX4927_INTB_PCIC 1 +#define RBTX4927_INTB_PCIB 2 +#define RBTX4927_INTB_PCIA 3 +#define RBTX4927_INTF_PCID (1 << RBTX4927_INTB_PCID) +#define RBTX4927_INTF_PCIC (1 << RBTX4927_INTB_PCIC) +#define RBTX4927_INTF_PCIB (1 << RBTX4927_INTB_PCIB) +#define RBTX4927_INTF_PCIA (1 << RBTX4927_INTB_PCIA) + +#define RBTX4927_NR_IRQ_IOC 8 /* IOC */ + +#define RBTX4927_IRQ_IOC (TXX9_IRQ_BASE + TX4927_NUM_IR) +#define RBTX4927_IRQ_IOC_PCID (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCID) +#define RBTX4927_IRQ_IOC_PCIC (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIC) +#define RBTX4927_IRQ_IOC_PCIB (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIB) +#define RBTX4927_IRQ_IOC_PCIA (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIA) + +#define RBTX4927_IRQ_IOCINT (TXX9_IRQ_BASE + TX4927_IR_INT(1)) + +#ifdef CONFIG_PCI +#define RBTX4927_ISA_IO_OFFSET RBTX4927_PCIIO +#else +#define RBTX4927_ISA_IO_OFFSET 0 +#endif + +#define RBTX4927_RTL_8019_BASE (RBTX4927_ETHER_ADDR - mips_io_port_base) +#define RBTX4927_RTL_8019_IRQ (TXX9_IRQ_BASE + TX4927_IR_INT(3)) + +void rbtx4927_prom_init(void); +void rbtx4927_irq_setup(void); +struct pci_dev; +int rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); + +#endif /* __ASM_TXX9_RBTX4927_H */ diff --git a/arch/mips/include/asm/txx9/rbtx4938.h b/arch/mips/include/asm/txx9/rbtx4938.h new file mode 100644 index 000000000000..9f0441a28126 --- /dev/null +++ b/arch/mips/include/asm/txx9/rbtx4938.h @@ -0,0 +1,145 @@ +/* + * Definitions for TX4937/TX4938 + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#ifndef __ASM_TXX9_RBTX4938_H +#define __ASM_TXX9_RBTX4938_H + +#include <asm/addrspace.h> +#include <asm/txx9irq.h> +#include <asm/txx9/tx4938.h> + +/* Address map */ +#define RBTX4938_FPGA_REG_ADDR (IO_BASE + TXX9_CE(2) + 0x00000000) +#define RBTX4938_FPGA_REV_ADDR (IO_BASE + TXX9_CE(2) + 0x00000002) +#define RBTX4938_CONFIG1_ADDR (IO_BASE + TXX9_CE(2) + 0x00000004) +#define RBTX4938_CONFIG2_ADDR (IO_BASE + TXX9_CE(2) + 0x00000006) +#define RBTX4938_CONFIG3_ADDR (IO_BASE + TXX9_CE(2) + 0x00000008) +#define RBTX4938_LED_ADDR (IO_BASE + TXX9_CE(2) + 0x00001000) +#define RBTX4938_DIPSW_ADDR (IO_BASE + TXX9_CE(2) + 0x00001002) +#define RBTX4938_BDIPSW_ADDR (IO_BASE + TXX9_CE(2) + 0x00001004) +#define RBTX4938_IMASK_ADDR (IO_BASE + TXX9_CE(2) + 0x00002000) +#define RBTX4938_IMASK2_ADDR (IO_BASE + TXX9_CE(2) + 0x00002002) +#define RBTX4938_INTPOL_ADDR (IO_BASE + TXX9_CE(2) + 0x00002004) +#define RBTX4938_ISTAT_ADDR (IO_BASE + TXX9_CE(2) + 0x00002006) +#define RBTX4938_ISTAT2_ADDR (IO_BASE + TXX9_CE(2) + 0x00002008) +#define RBTX4938_IMSTAT_ADDR (IO_BASE + TXX9_CE(2) + 0x0000200a) +#define RBTX4938_IMSTAT2_ADDR (IO_BASE + TXX9_CE(2) + 0x0000200c) +#define RBTX4938_SOFTINT_ADDR (IO_BASE + TXX9_CE(2) + 0x00003000) +#define RBTX4938_PIOSEL_ADDR (IO_BASE + TXX9_CE(2) + 0x00005000) +#define RBTX4938_SPICS_ADDR (IO_BASE + TXX9_CE(2) + 0x00005002) +#define RBTX4938_SFPWR_ADDR (IO_BASE + TXX9_CE(2) + 0x00005008) +#define RBTX4938_SFVOL_ADDR (IO_BASE + TXX9_CE(2) + 0x0000500a) +#define RBTX4938_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x00007000) +#define RBTX4938_SOFTRESETLOCK_ADDR (IO_BASE + TXX9_CE(2) + 0x00007002) +#define RBTX4938_PCIRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x00007004) +#define RBTX4938_ETHER_BASE (IO_BASE + TXX9_CE(2) + 0x00020000) + +/* Ethernet port address (Jumperless Mode (W12:Open)) */ +#define RBTX4938_ETHER_ADDR (RBTX4938_ETHER_BASE + 0x280) + +/* bits for ISTAT/IMASK/IMSTAT */ +#define RBTX4938_INTB_PCID 0 +#define RBTX4938_INTB_PCIC 1 +#define RBTX4938_INTB_PCIB 2 +#define RBTX4938_INTB_PCIA 3 +#define RBTX4938_INTB_RTC 4 +#define RBTX4938_INTB_ATA 5 +#define RBTX4938_INTB_MODEM 6 +#define RBTX4938_INTB_SWINT 7 +#define RBTX4938_INTF_PCID (1 << RBTX4938_INTB_PCID) +#define RBTX4938_INTF_PCIC (1 << RBTX4938_INTB_PCIC) +#define RBTX4938_INTF_PCIB (1 << RBTX4938_INTB_PCIB) +#define RBTX4938_INTF_PCIA (1 << RBTX4938_INTB_PCIA) +#define RBTX4938_INTF_RTC (1 << RBTX4938_INTB_RTC) +#define RBTX4938_INTF_ATA (1 << RBTX4938_INTB_ATA) +#define RBTX4938_INTF_MODEM (1 << RBTX4938_INTB_MODEM) +#define RBTX4938_INTF_SWINT (1 << RBTX4938_INTB_SWINT) + +#define rbtx4938_fpga_rev_addr ((__u8 __iomem *)RBTX4938_FPGA_REV_ADDR) +#define rbtx4938_led_addr ((__u8 __iomem *)RBTX4938_LED_ADDR) +#define rbtx4938_dipsw_addr ((__u8 __iomem *)RBTX4938_DIPSW_ADDR) +#define rbtx4938_bdipsw_addr ((__u8 __iomem *)RBTX4938_BDIPSW_ADDR) +#define rbtx4938_imask_addr ((__u8 __iomem *)RBTX4938_IMASK_ADDR) +#define rbtx4938_imask2_addr ((__u8 __iomem *)RBTX4938_IMASK2_ADDR) +#define rbtx4938_intpol_addr ((__u8 __iomem *)RBTX4938_INTPOL_ADDR) +#define rbtx4938_istat_addr ((__u8 __iomem *)RBTX4938_ISTAT_ADDR) +#define rbtx4938_istat2_addr ((__u8 __iomem *)RBTX4938_ISTAT2_ADDR) +#define rbtx4938_imstat_addr ((__u8 __iomem *)RBTX4938_IMSTAT_ADDR) +#define rbtx4938_imstat2_addr ((__u8 __iomem *)RBTX4938_IMSTAT2_ADDR) +#define rbtx4938_softint_addr ((__u8 __iomem *)RBTX4938_SOFTINT_ADDR) +#define rbtx4938_piosel_addr ((__u8 __iomem *)RBTX4938_PIOSEL_ADDR) +#define rbtx4938_spics_addr ((__u8 __iomem *)RBTX4938_SPICS_ADDR) +#define rbtx4938_sfpwr_addr ((__u8 __iomem *)RBTX4938_SFPWR_ADDR) +#define rbtx4938_sfvol_addr ((__u8 __iomem *)RBTX4938_SFVOL_ADDR) +#define rbtx4938_softreset_addr ((__u8 __iomem *)RBTX4938_SOFTRESET_ADDR) +#define rbtx4938_softresetlock_addr \ + ((__u8 __iomem *)RBTX4938_SOFTRESETLOCK_ADDR) +#define rbtx4938_pcireset_addr ((__u8 __iomem *)RBTX4938_PCIRESET_ADDR) + +/* + * IRQ mappings + */ + +#define RBTX4938_SOFT_INT0 0 /* not used */ +#define RBTX4938_SOFT_INT1 1 /* not used */ +#define RBTX4938_IRC_INT 2 +#define RBTX4938_TIMER_INT 7 + +/* These are the virtual IRQ numbers, we divide all IRQ's into + * 'spaces', the 'space' determines where and how to enable/disable + * that particular IRQ on an RBTX4938 machine. Add new 'spaces' as new + * IRQ hardware is supported. + */ +#define RBTX4938_NR_IRQ_IOC 8 + +#define RBTX4938_IRQ_IRC TXX9_IRQ_BASE +#define RBTX4938_IRQ_IOC (TXX9_IRQ_BASE + TX4938_NUM_IR) +#define RBTX4938_IRQ_END (RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC) + +#define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR) +#define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR) +#define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n)) +#define RBTX4938_IRQ_IRC_SIO(n) (RBTX4938_IRQ_IRC + TX4938_IR_SIO(n)) +#define RBTX4938_IRQ_IRC_DMA(ch, n) (RBTX4938_IRQ_IRC + TX4938_IR_DMA(ch, n)) +#define RBTX4938_IRQ_IRC_PIO (RBTX4938_IRQ_IRC + TX4938_IR_PIO) +#define RBTX4938_IRQ_IRC_PDMAC (RBTX4938_IRQ_IRC + TX4938_IR_PDMAC) +#define RBTX4938_IRQ_IRC_PCIC (RBTX4938_IRQ_IRC + TX4938_IR_PCIC) +#define RBTX4938_IRQ_IRC_TMR(n) (RBTX4938_IRQ_IRC + TX4938_IR_TMR(n)) +#define RBTX4938_IRQ_IRC_NDFMC (RBTX4938_IRQ_IRC + TX4938_IR_NDFMC) +#define RBTX4938_IRQ_IRC_PCIERR (RBTX4938_IRQ_IRC + TX4938_IR_PCIERR) +#define RBTX4938_IRQ_IRC_PCIPME (RBTX4938_IRQ_IRC + TX4938_IR_PCIPME) +#define RBTX4938_IRQ_IRC_ACLC (RBTX4938_IRQ_IRC + TX4938_IR_ACLC) +#define RBTX4938_IRQ_IRC_ACLCPME (RBTX4938_IRQ_IRC + TX4938_IR_ACLCPME) +#define RBTX4938_IRQ_IRC_PCIC1 (RBTX4938_IRQ_IRC + TX4938_IR_PCIC1) +#define RBTX4938_IRQ_IRC_SPI (RBTX4938_IRQ_IRC + TX4938_IR_SPI) +#define RBTX4938_IRQ_IOC_PCID (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCID) +#define RBTX4938_IRQ_IOC_PCIC (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIC) +#define RBTX4938_IRQ_IOC_PCIB (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIB) +#define RBTX4938_IRQ_IOC_PCIA (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIA) +#define RBTX4938_IRQ_IOC_RTC (RBTX4938_IRQ_IOC + RBTX4938_INTB_RTC) +#define RBTX4938_IRQ_IOC_ATA (RBTX4938_IRQ_IOC + RBTX4938_INTB_ATA) +#define RBTX4938_IRQ_IOC_MODEM (RBTX4938_IRQ_IOC + RBTX4938_INTB_MODEM) +#define RBTX4938_IRQ_IOC_SWINT (RBTX4938_IRQ_IOC + RBTX4938_INTB_SWINT) + + +/* IOC (PCI, etc) */ +#define RBTX4938_IRQ_IOCINT (TXX9_IRQ_BASE + TX4938_IR_INT(0)) +/* Onboard 10M Ether */ +#define RBTX4938_IRQ_ETHER (TXX9_IRQ_BASE + TX4938_IR_INT(1)) + +#define RBTX4938_RTL_8019_BASE (RBTX4938_ETHER_ADDR - mips_io_port_base) +#define RBTX4938_RTL_8019_IRQ (RBTX4938_IRQ_ETHER) + +void rbtx4938_prom_init(void); +void rbtx4938_irq_setup(void); +struct pci_dev; +int rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); + +#endif /* __ASM_TXX9_RBTX4938_H */ diff --git a/arch/mips/include/asm/txx9/rbtx4939.h b/arch/mips/include/asm/txx9/rbtx4939.h new file mode 100644 index 000000000000..1acf428c0b4f --- /dev/null +++ b/arch/mips/include/asm/txx9/rbtx4939.h @@ -0,0 +1,133 @@ +/* + * Definitions for RBTX4939 + * + * (C) Copyright TOSHIBA CORPORATION 2005-2006 + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_TXX9_RBTX4939_H +#define __ASM_TXX9_RBTX4939_H + +#include <asm/addrspace.h> +#include <asm/txx9irq.h> +#include <asm/txx9/generic.h> +#include <asm/txx9/tx4939.h> + +/* Address map */ +#define RBTX4939_IOC_REG_ADDR (IO_BASE + TXX9_CE(1) + 0x00000000) +#define RBTX4939_BOARD_REV_ADDR (IO_BASE + TXX9_CE(1) + 0x00000000) +#define RBTX4939_IOC_REV_ADDR (IO_BASE + TXX9_CE(1) + 0x00000002) +#define RBTX4939_CONFIG1_ADDR (IO_BASE + TXX9_CE(1) + 0x00000004) +#define RBTX4939_CONFIG2_ADDR (IO_BASE + TXX9_CE(1) + 0x00000006) +#define RBTX4939_CONFIG3_ADDR (IO_BASE + TXX9_CE(1) + 0x00000008) +#define RBTX4939_CONFIG4_ADDR (IO_BASE + TXX9_CE(1) + 0x0000000a) +#define RBTX4939_USTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00001000) +#define RBTX4939_UDIPSW_ADDR (IO_BASE + TXX9_CE(1) + 0x00001002) +#define RBTX4939_BDIPSW_ADDR (IO_BASE + TXX9_CE(1) + 0x00001004) +#define RBTX4939_IEN_ADDR (IO_BASE + TXX9_CE(1) + 0x00002000) +#define RBTX4939_IPOL_ADDR (IO_BASE + TXX9_CE(1) + 0x00002002) +#define RBTX4939_IFAC1_ADDR (IO_BASE + TXX9_CE(1) + 0x00002004) +#define RBTX4939_IFAC2_ADDR (IO_BASE + TXX9_CE(1) + 0x00002006) +#define RBTX4939_SOFTINT_ADDR (IO_BASE + TXX9_CE(1) + 0x00003000) +#define RBTX4939_ISASTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00004000) +#define RBTX4939_PCISTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00004002) +#define RBTX4939_ROME_ADDR (IO_BASE + TXX9_CE(1) + 0x00004004) +#define RBTX4939_SPICS_ADDR (IO_BASE + TXX9_CE(1) + 0x00004006) +#define RBTX4939_AUDI_ADDR (IO_BASE + TXX9_CE(1) + 0x00004008) +#define RBTX4939_ISAGPIO_ADDR (IO_BASE + TXX9_CE(1) + 0x0000400a) +#define RBTX4939_PE1_ADDR (IO_BASE + TXX9_CE(1) + 0x00005000) +#define RBTX4939_PE2_ADDR (IO_BASE + TXX9_CE(1) + 0x00005002) +#define RBTX4939_PE3_ADDR (IO_BASE + TXX9_CE(1) + 0x00005004) +#define RBTX4939_VP_ADDR (IO_BASE + TXX9_CE(1) + 0x00005006) +#define RBTX4939_VPRESET_ADDR (IO_BASE + TXX9_CE(1) + 0x00005008) +#define RBTX4939_VPSOUT_ADDR (IO_BASE + TXX9_CE(1) + 0x0000500a) +#define RBTX4939_VPSIN_ADDR (IO_BASE + TXX9_CE(1) + 0x0000500c) +#define RBTX4939_7SEG_ADDR(s, ch) \ + (IO_BASE + TXX9_CE(1) + 0x00006000 + (s) * 16 + ((ch) & 3) * 2) +#define RBTX4939_SOFTRESET_ADDR (IO_BASE + TXX9_CE(1) + 0x00007000) +#define RBTX4939_RESETEN_ADDR (IO_BASE + TXX9_CE(1) + 0x00007002) +#define RBTX4939_RESETSTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00007004) +#define RBTX4939_ETHER_BASE (IO_BASE + TXX9_CE(1) + 0x00020000) + +/* Ethernet port address */ +#define RBTX4939_ETHER_ADDR (RBTX4939_ETHER_BASE + 0x300) + +/* bits for IEN/IPOL/IFAC */ +#define RBTX4938_INTB_ISA0 0 +#define RBTX4938_INTB_ISA11 1 +#define RBTX4938_INTB_ISA12 2 +#define RBTX4938_INTB_ISA15 3 +#define RBTX4938_INTB_I2S 4 +#define RBTX4938_INTB_SW 5 +#define RBTX4938_INTF_ISA0 (1 << RBTX4938_INTB_ISA0) +#define RBTX4938_INTF_ISA11 (1 << RBTX4938_INTB_ISA11) +#define RBTX4938_INTF_ISA12 (1 << RBTX4938_INTB_ISA12) +#define RBTX4938_INTF_ISA15 (1 << RBTX4938_INTB_ISA15) +#define RBTX4938_INTF_I2S (1 << RBTX4938_INTB_I2S) +#define RBTX4938_INTF_SW (1 << RBTX4938_INTB_SW) + +/* bits for PE1,PE2,PE3 */ +#define RBTX4939_PE1_ATA(ch) (0x01 << (ch)) +#define RBTX4939_PE1_RMII(ch) (0x04 << (ch)) +#define RBTX4939_PE2_SIO0 0x01 +#define RBTX4939_PE2_SIO2 0x02 +#define RBTX4939_PE2_SIO3 0x04 +#define RBTX4939_PE2_CIR 0x08 +#define RBTX4939_PE2_SPI 0x10 +#define RBTX4939_PE2_GPIO 0x20 +#define RBTX4939_PE3_VP 0x01 +#define RBTX4939_PE3_VP_P 0x02 +#define RBTX4939_PE3_VP_S 0x04 + +#define rbtx4939_board_rev_addr ((u8 __iomem *)RBTX4939_BOARD_REV_ADDR) +#define rbtx4939_ioc_rev_addr ((u8 __iomem *)RBTX4939_IOC_REV_ADDR) +#define rbtx4939_config1_addr ((u8 __iomem *)RBTX4939_CONFIG1_ADDR) +#define rbtx4939_config2_addr ((u8 __iomem *)RBTX4939_CONFIG2_ADDR) +#define rbtx4939_config3_addr ((u8 __iomem *)RBTX4939_CONFIG3_ADDR) +#define rbtx4939_config4_addr ((u8 __iomem *)RBTX4939_CONFIG4_ADDR) +#define rbtx4939_ustat_addr ((u8 __iomem *)RBTX4939_USTAT_ADDR) +#define rbtx4939_udipsw_addr ((u8 __iomem *)RBTX4939_UDIPSW_ADDR) +#define rbtx4939_bdipsw_addr ((u8 __iomem *)RBTX4939_BDIPSW_ADDR) +#define rbtx4939_ien_addr ((u8 __iomem *)RBTX4939_IEN_ADDR) +#define rbtx4939_ipol_addr ((u8 __iomem *)RBTX4939_IPOL_ADDR) +#define rbtx4939_ifac1_addr ((u8 __iomem *)RBTX4939_IFAC1_ADDR) +#define rbtx4939_ifac2_addr ((u8 __iomem *)RBTX4939_IFAC2_ADDR) +#define rbtx4939_softint_addr ((u8 __iomem *)RBTX4939_SOFTINT_ADDR) +#define rbtx4939_isastat_addr ((u8 __iomem *)RBTX4939_ISASTAT_ADDR) +#define rbtx4939_pcistat_addr ((u8 __iomem *)RBTX4939_PCISTAT_ADDR) +#define rbtx4939_rome_addr ((u8 __iomem *)RBTX4939_ROME_ADDR) +#define rbtx4939_spics_addr ((u8 __iomem *)RBTX4939_SPICS_ADDR) +#define rbtx4939_audi_addr ((u8 __iomem *)RBTX4939_AUDI_ADDR) +#define rbtx4939_isagpio_addr ((u8 __iomem *)RBTX4939_ISAGPIO_ADDR) +#define rbtx4939_pe1_addr ((u8 __iomem *)RBTX4939_PE1_ADDR) +#define rbtx4939_pe2_addr ((u8 __iomem *)RBTX4939_PE2_ADDR) +#define rbtx4939_pe3_addr ((u8 __iomem *)RBTX4939_PE3_ADDR) +#define rbtx4939_vp_addr ((u8 __iomem *)RBTX4939_VP_ADDR) +#define rbtx4939_vpreset_addr ((u8 __iomem *)RBTX4939_VPRESET_ADDR) +#define rbtx4939_vpsout_addr ((u8 __iomem *)RBTX4939_VPSOUT_ADDR) +#define rbtx4939_vpsin_addr ((u8 __iomem *)RBTX4939_VPSIN_ADDR) +#define rbtx4939_7seg_addr(s, ch) \ + ((u8 __iomem *)RBTX4939_7SEG_ADDR(s, ch)) +#define rbtx4939_softreset_addr ((u8 __iomem *)RBTX4939_SOFTRESET_ADDR) +#define rbtx4939_reseten_addr ((u8 __iomem *)RBTX4939_RESETEN_ADDR) +#define rbtx4939_resetstat_addr ((u8 __iomem *)RBTX4939_RESETSTAT_ADDR) + +/* + * IRQ mappings + */ +#define RBTX4939_NR_IRQ_IOC 8 + +#define RBTX4939_IRQ_IOC (TXX9_IRQ_BASE + TX4939_NUM_IR) +#define RBTX4939_IRQ_END (RBTX4939_IRQ_IOC + RBTX4939_NR_IRQ_IOC) + +/* IOC (ISA, etc) */ +#define RBTX4939_IRQ_IOCINT (TXX9_IRQ_BASE + TX4939_IR_INT(0)) +/* Onboard 10M Ether */ +#define RBTX4939_IRQ_ETHER (TXX9_IRQ_BASE + TX4939_IR_INT(1)) + +void rbtx4939_prom_init(void); +void rbtx4939_irq_setup(void); + +#endif /* __ASM_TXX9_RBTX4939_H */ diff --git a/arch/mips/include/asm/txx9/smsc_fdc37m81x.h b/arch/mips/include/asm/txx9/smsc_fdc37m81x.h new file mode 100644 index 000000000000..d1d6332b4ca6 --- /dev/null +++ b/arch/mips/include/asm/txx9/smsc_fdc37m81x.h @@ -0,0 +1,68 @@ +/* + * Interface for smsc fdc48m81x Super IO chip + * + * Author: MontaVista Software, Inc. source@mvista.com + * + * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright (C) 2004 MontaVista Software Inc. + * Manish Lachwani, mlachwani@mvista.com + */ + +#ifndef _SMSC_FDC37M81X_H_ +#define _SMSC_FDC37M81X_H_ + +/* Common Registers */ +#define SMSC_FDC37M81X_CONFIG_INDEX 0x00 +#define SMSC_FDC37M81X_CONFIG_DATA 0x01 +#define SMSC_FDC37M81X_CONF 0x02 +#define SMSC_FDC37M81X_INDEX 0x03 +#define SMSC_FDC37M81X_DNUM 0x07 +#define SMSC_FDC37M81X_DID 0x20 +#define SMSC_FDC37M81X_DREV 0x21 +#define SMSC_FDC37M81X_PCNT 0x22 +#define SMSC_FDC37M81X_PMGT 0x23 +#define SMSC_FDC37M81X_OSC 0x24 +#define SMSC_FDC37M81X_CONFPA0 0x26 +#define SMSC_FDC37M81X_CONFPA1 0x27 +#define SMSC_FDC37M81X_TEST4 0x2B +#define SMSC_FDC37M81X_TEST5 0x2C +#define SMSC_FDC37M81X_TEST1 0x2D +#define SMSC_FDC37M81X_TEST2 0x2E +#define SMSC_FDC37M81X_TEST3 0x2F + +/* Logical device numbers */ +#define SMSC_FDC37M81X_FDD 0x00 +#define SMSC_FDC37M81X_PARALLEL 0x03 +#define SMSC_FDC37M81X_SERIAL1 0x04 +#define SMSC_FDC37M81X_SERIAL2 0x05 +#define SMSC_FDC37M81X_KBD 0x07 +#define SMSC_FDC37M81X_AUXIO 0x08 +#define SMSC_FDC37M81X_NONE 0xff + +/* Logical device Config Registers */ +#define SMSC_FDC37M81X_ACTIVE 0x30 +#define SMSC_FDC37M81X_BASEADDR0 0x60 +#define SMSC_FDC37M81X_BASEADDR1 0x61 +#define SMSC_FDC37M81X_INT 0x70 +#define SMSC_FDC37M81X_INT2 0x72 +#define SMSC_FDC37M81X_LDCR_F0 0xF0 + +/* Chip Config Values */ +#define SMSC_FDC37M81X_CONFIG_ENTER 0x55 +#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa +#define SMSC_FDC37M81X_CHIP_ID 0x4d + +unsigned long smsc_fdc37m81x_init(unsigned long port); + +void smsc_fdc37m81x_config_beg(void); + +void smsc_fdc37m81x_config_end(void); + +u8 smsc_fdc37m81x_config_get(u8 reg); +void smsc_fdc37m81x_config_set(u8 reg, u8 val); + +#endif diff --git a/arch/mips/include/asm/txx9/spi.h b/arch/mips/include/asm/txx9/spi.h new file mode 100644 index 000000000000..0d727f354557 --- /dev/null +++ b/arch/mips/include/asm/txx9/spi.h @@ -0,0 +1,34 @@ +/* + * Definitions for TX4937/TX4938 SPI + * + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#ifndef __ASM_TXX9_SPI_H +#define __ASM_TXX9_SPI_H + +#include <linux/errno.h> + +#ifdef CONFIG_SPI +int spi_eeprom_register(int busid, int chipid, int size); +int spi_eeprom_read(int busid, int chipid, + int address, unsigned char *buf, int len); +#else +static inline int spi_eeprom_register(int busid, int chipid, int size) +{ + return -ENODEV; +} +static inline int spi_eeprom_read(int busid, int chipid, + int address, unsigned char *buf, int len) +{ + return -ENODEV; +} +#endif + +#endif /* __ASM_TXX9_SPI_H */ diff --git a/arch/mips/include/asm/txx9/tx3927.h b/arch/mips/include/asm/txx9/tx3927.h new file mode 100644 index 000000000000..dc30c8d42061 --- /dev/null +++ b/arch/mips/include/asm/txx9/tx3927.h @@ -0,0 +1,341 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Toshiba Corporation + */ +#ifndef __ASM_TXX9_TX3927_H +#define __ASM_TXX9_TX3927_H + +#define TX3927_REG_BASE 0xfffe0000UL +#define TX3927_REG_SIZE 0x00010000 +#define TX3927_SDRAMC_REG (TX3927_REG_BASE + 0x8000) +#define TX3927_ROMC_REG (TX3927_REG_BASE + 0x9000) +#define TX3927_DMA_REG (TX3927_REG_BASE + 0xb000) +#define TX3927_IRC_REG (TX3927_REG_BASE + 0xc000) +#define TX3927_PCIC_REG (TX3927_REG_BASE + 0xd000) +#define TX3927_CCFG_REG (TX3927_REG_BASE + 0xe000) +#define TX3927_NR_TMR 3 +#define TX3927_TMR_REG(ch) (TX3927_REG_BASE + 0xf000 + (ch) * 0x100) +#define TX3927_NR_SIO 2 +#define TX3927_SIO_REG(ch) (TX3927_REG_BASE + 0xf300 + (ch) * 0x100) +#define TX3927_PIO_REG (TX3927_REG_BASE + 0xf500) + +struct tx3927_sdramc_reg { + volatile unsigned long cr[8]; + volatile unsigned long tr[3]; + volatile unsigned long cmd; + volatile unsigned long smrs[2]; +}; + +struct tx3927_romc_reg { + volatile unsigned long cr[8]; +}; + +struct tx3927_dma_reg { + struct tx3927_dma_ch_reg { + volatile unsigned long cha; + volatile unsigned long sar; + volatile unsigned long dar; + volatile unsigned long cntr; + volatile unsigned long sair; + volatile unsigned long dair; + volatile unsigned long ccr; + volatile unsigned long csr; + } ch[4]; + volatile unsigned long dbr[8]; + volatile unsigned long tdhr; + volatile unsigned long mcr; + volatile unsigned long unused0; +}; + +#include <asm/byteorder.h> + +#ifdef __BIG_ENDIAN +#define endian_def_s2(e1, e2) \ + volatile unsigned short e1, e2 +#define endian_def_sb2(e1, e2, e3) \ + volatile unsigned short e1;volatile unsigned char e2, e3 +#define endian_def_b2s(e1, e2, e3) \ + volatile unsigned char e1, e2;volatile unsigned short e3 +#define endian_def_b4(e1, e2, e3, e4) \ + volatile unsigned char e1, e2, e3, e4 +#else +#define endian_def_s2(e1, e2) \ + volatile unsigned short e2, e1 +#define endian_def_sb2(e1, e2, e3) \ + volatile unsigned char e3, e2;volatile unsigned short e1 +#define endian_def_b2s(e1, e2, e3) \ + volatile unsigned short e3;volatile unsigned char e2, e1 +#define endian_def_b4(e1, e2, e3, e4) \ + volatile unsigned char e4, e3, e2, e1 +#endif + +struct tx3927_pcic_reg { + endian_def_s2(did, vid); + endian_def_s2(pcistat, pcicmd); + endian_def_b4(cc, scc, rpli, rid); + endian_def_b4(unused0, ht, mlt, cls); + volatile unsigned long ioba; /* +10 */ + volatile unsigned long mba; + volatile unsigned long unused1[5]; + endian_def_s2(svid, ssvid); + volatile unsigned long unused2; /* +30 */ + endian_def_sb2(unused3, unused4, capptr); + volatile unsigned long unused5; + endian_def_b4(ml, mg, ip, il); + volatile unsigned long unused6; /* +40 */ + volatile unsigned long istat; + volatile unsigned long iim; + volatile unsigned long rrt; + volatile unsigned long unused7[3]; /* +50 */ + volatile unsigned long ipbmma; + volatile unsigned long ipbioma; /* +60 */ + volatile unsigned long ilbmma; + volatile unsigned long ilbioma; + volatile unsigned long unused8[9]; + volatile unsigned long tc; /* +90 */ + volatile unsigned long tstat; + volatile unsigned long tim; + volatile unsigned long tccmd; + volatile unsigned long pcirrt; /* +a0 */ + volatile unsigned long pcirrt_cmd; + volatile unsigned long pcirrdt; + volatile unsigned long unused9[3]; + volatile unsigned long tlboap; + volatile unsigned long tlbiap; + volatile unsigned long tlbmma; /* +c0 */ + volatile unsigned long tlbioma; + volatile unsigned long sc_msg; + volatile unsigned long sc_be; + volatile unsigned long tbl; /* +d0 */ + volatile unsigned long unused10[3]; + volatile unsigned long pwmng; /* +e0 */ + volatile unsigned long pwmngs; + volatile unsigned long unused11[6]; + volatile unsigned long req_trace; /* +100 */ + volatile unsigned long pbapmc; + volatile unsigned long pbapms; + volatile unsigned long pbapmim; + volatile unsigned long bm; /* +110 */ + volatile unsigned long cpcibrs; + volatile unsigned long cpcibgs; + volatile unsigned long pbacs; + volatile unsigned long iobas; /* +120 */ + volatile unsigned long mbas; + volatile unsigned long lbc; + volatile unsigned long lbstat; + volatile unsigned long lbim; /* +130 */ + volatile unsigned long pcistatim; + volatile unsigned long ica; + volatile unsigned long icd; + volatile unsigned long iiadp; /* +140 */ + volatile unsigned long iscdp; + volatile unsigned long mmas; + volatile unsigned long iomas; + volatile unsigned long ipciaddr; /* +150 */ + volatile unsigned long ipcidata; + volatile unsigned long ipcibe; +}; + +struct tx3927_ccfg_reg { + volatile unsigned long ccfg; + volatile unsigned long crir; + volatile unsigned long pcfg; + volatile unsigned long tear; + volatile unsigned long pdcr; +}; + +/* + * SDRAMC + */ + +/* + * ROMC + */ + +/* + * DMA + */ +/* bits for MCR */ +#define TX3927_DMA_MCR_EIS(ch) (0x10000000<<(ch)) +#define TX3927_DMA_MCR_DIS(ch) (0x01000000<<(ch)) +#define TX3927_DMA_MCR_RSFIF 0x00000080 +#define TX3927_DMA_MCR_FIFUM(ch) (0x00000008<<(ch)) +#define TX3927_DMA_MCR_LE 0x00000004 +#define TX3927_DMA_MCR_RPRT 0x00000002 +#define TX3927_DMA_MCR_MSTEN 0x00000001 + +/* bits for CCRn */ +#define TX3927_DMA_CCR_DBINH 0x04000000 +#define TX3927_DMA_CCR_SBINH 0x02000000 +#define TX3927_DMA_CCR_CHRST 0x01000000 +#define TX3927_DMA_CCR_RVBYTE 0x00800000 +#define TX3927_DMA_CCR_ACKPOL 0x00400000 +#define TX3927_DMA_CCR_REQPL 0x00200000 +#define TX3927_DMA_CCR_EGREQ 0x00100000 +#define TX3927_DMA_CCR_CHDN 0x00080000 +#define TX3927_DMA_CCR_DNCTL 0x00060000 +#define TX3927_DMA_CCR_EXTRQ 0x00010000 +#define TX3927_DMA_CCR_INTRQD 0x0000e000 +#define TX3927_DMA_CCR_INTENE 0x00001000 +#define TX3927_DMA_CCR_INTENC 0x00000800 +#define TX3927_DMA_CCR_INTENT 0x00000400 +#define TX3927_DMA_CCR_CHNEN 0x00000200 +#define TX3927_DMA_CCR_XFACT 0x00000100 +#define TX3927_DMA_CCR_SNOP 0x00000080 +#define TX3927_DMA_CCR_DSTINC 0x00000040 +#define TX3927_DMA_CCR_SRCINC 0x00000020 +#define TX3927_DMA_CCR_XFSZ(order) (((order) << 2) & 0x0000001c) +#define TX3927_DMA_CCR_XFSZ_1W TX3927_DMA_CCR_XFSZ(2) +#define TX3927_DMA_CCR_XFSZ_4W TX3927_DMA_CCR_XFSZ(4) +#define TX3927_DMA_CCR_XFSZ_8W TX3927_DMA_CCR_XFSZ(5) +#define TX3927_DMA_CCR_XFSZ_16W TX3927_DMA_CCR_XFSZ(6) +#define TX3927_DMA_CCR_XFSZ_32W TX3927_DMA_CCR_XFSZ(7) +#define TX3927_DMA_CCR_MEMIO 0x00000002 +#define TX3927_DMA_CCR_ONEAD 0x00000001 + +/* bits for CSRn */ +#define TX3927_DMA_CSR_CHNACT 0x00000100 +#define TX3927_DMA_CSR_ABCHC 0x00000080 +#define TX3927_DMA_CSR_NCHNC 0x00000040 +#define TX3927_DMA_CSR_NTRNFC 0x00000020 +#define TX3927_DMA_CSR_EXTDN 0x00000010 +#define TX3927_DMA_CSR_CFERR 0x00000008 +#define TX3927_DMA_CSR_CHERR 0x00000004 +#define TX3927_DMA_CSR_DESERR 0x00000002 +#define TX3927_DMA_CSR_SORERR 0x00000001 + +/* + * IRC + */ +#define TX3927_IR_INT0 0 +#define TX3927_IR_INT1 1 +#define TX3927_IR_INT2 2 +#define TX3927_IR_INT3 3 +#define TX3927_IR_INT4 4 +#define TX3927_IR_INT5 5 +#define TX3927_IR_SIO0 6 +#define TX3927_IR_SIO1 7 +#define TX3927_IR_SIO(ch) (6 + (ch)) +#define TX3927_IR_DMA 8 +#define TX3927_IR_PIO 9 +#define TX3927_IR_PCI 10 +#define TX3927_IR_TMR(ch) (13 + (ch)) +#define TX3927_NUM_IR 16 + +/* + * PCIC + */ +/* bits for PCICMD */ +/* see PCI_COMMAND_XXX in linux/pci.h */ + +/* bits for PCISTAT */ +/* see PCI_STATUS_XXX in linux/pci.h */ +#define PCI_STATUS_NEW_CAP 0x0010 + +/* bits for ISTAT/IIM */ +#define TX3927_PCIC_IIM_ALL 0x00001600 + +/* bits for TC */ +#define TX3927_PCIC_TC_OF16E 0x00000020 +#define TX3927_PCIC_TC_IF8E 0x00000010 +#define TX3927_PCIC_TC_OF8E 0x00000008 + +/* bits for TSTAT/TIM */ +#define TX3927_PCIC_TIM_ALL 0x0003ffff + +/* bits for IOBA/MBA */ +/* see PCI_BASE_ADDRESS_XXX in linux/pci.h */ + +/* bits for PBAPMC */ +#define TX3927_PCIC_PBAPMC_RPBA 0x00000004 +#define TX3927_PCIC_PBAPMC_PBAEN 0x00000002 +#define TX3927_PCIC_PBAPMC_BMCEN 0x00000001 + +/* bits for LBSTAT/LBIM */ +#define TX3927_PCIC_LBIM_ALL 0x0000003e + +/* bits for PCISTATIM (see also PCI_STATUS_XXX in linux/pci.h */ +#define TX3927_PCIC_PCISTATIM_ALL 0x0000f900 + +/* bits for LBC */ +#define TX3927_PCIC_LBC_IBSE 0x00004000 +#define TX3927_PCIC_LBC_TIBSE 0x00002000 +#define TX3927_PCIC_LBC_TMFBSE 0x00001000 +#define TX3927_PCIC_LBC_HRST 0x00000800 +#define TX3927_PCIC_LBC_SRST 0x00000400 +#define TX3927_PCIC_LBC_EPCAD 0x00000200 +#define TX3927_PCIC_LBC_MSDSE 0x00000100 +#define TX3927_PCIC_LBC_CRR 0x00000080 +#define TX3927_PCIC_LBC_ILMDE 0x00000040 +#define TX3927_PCIC_LBC_ILIDE 0x00000020 + +#define TX3927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) +#define TX3927_PCIC_MAX_DEVNU TX3927_PCIC_IDSEL_AD_TO_SLOT(32) + +/* + * CCFG + */ +/* CCFG : Chip Configuration */ +#define TX3927_CCFG_TLBOFF 0x00020000 +#define TX3927_CCFG_BEOW 0x00010000 +#define TX3927_CCFG_WR 0x00008000 +#define TX3927_CCFG_TOE 0x00004000 +#define TX3927_CCFG_PCIXARB 0x00002000 +#define TX3927_CCFG_PCI3 0x00001000 +#define TX3927_CCFG_PSNP 0x00000800 +#define TX3927_CCFG_PPRI 0x00000400 +#define TX3927_CCFG_PLLM 0x00000030 +#define TX3927_CCFG_ENDIAN 0x00000004 +#define TX3927_CCFG_HALT 0x00000002 +#define TX3927_CCFG_ACEHOLD 0x00000001 + +/* PCFG : Pin Configuration */ +#define TX3927_PCFG_SYSCLKEN 0x08000000 +#define TX3927_PCFG_SDRCLKEN_ALL 0x07c00000 +#define TX3927_PCFG_SDRCLKEN(ch) (0x00400000<<(ch)) +#define TX3927_PCFG_PCICLKEN_ALL 0x003c0000 +#define TX3927_PCFG_PCICLKEN(ch) (0x00040000<<(ch)) +#define TX3927_PCFG_SELALL 0x0003ffff +#define TX3927_PCFG_SELCS 0x00020000 +#define TX3927_PCFG_SELDSF 0x00010000 +#define TX3927_PCFG_SELSIOC_ALL 0x0000c000 +#define TX3927_PCFG_SELSIOC(ch) (0x00004000<<(ch)) +#define TX3927_PCFG_SELSIO_ALL 0x00003000 +#define TX3927_PCFG_SELSIO(ch) (0x00001000<<(ch)) +#define TX3927_PCFG_SELTMR_ALL 0x00000e00 +#define TX3927_PCFG_SELTMR(ch) (0x00000200<<(ch)) +#define TX3927_PCFG_SELDONE 0x00000100 +#define TX3927_PCFG_INTDMA_ALL 0x000000f0 +#define TX3927_PCFG_INTDMA(ch) (0x00000010<<(ch)) +#define TX3927_PCFG_SELDMA_ALL 0x0000000f +#define TX3927_PCFG_SELDMA(ch) (0x00000001<<(ch)) + +#define tx3927_sdramcptr ((struct tx3927_sdramc_reg *)TX3927_SDRAMC_REG) +#define tx3927_romcptr ((struct tx3927_romc_reg *)TX3927_ROMC_REG) +#define tx3927_dmaptr ((struct tx3927_dma_reg *)TX3927_DMA_REG) +#define tx3927_pcicptr ((struct tx3927_pcic_reg *)TX3927_PCIC_REG) +#define tx3927_ccfgptr ((struct tx3927_ccfg_reg *)TX3927_CCFG_REG) +#define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch)) +#define tx3927_pioptr ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG) + +#define TX3927_REV_PCODE() (tx3927_ccfgptr->crir >> 16) +#define TX3927_ROMC_BA(ch) (tx3927_romcptr->cr[(ch)] & 0xfff00000) +#define TX3927_ROMC_SIZE(ch) \ + (0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf)) +#define TX3927_ROMC_WIDTH(ch) (32 >> ((tx3927_romcptr->cr[(ch)] >> 7) & 0x1)) + +void tx3927_wdt_init(void); +void tx3927_setup(void); +void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr); +void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask); +struct pci_controller; +void tx3927_pcic_setup(struct pci_controller *channel, + unsigned long sdram_size, int extarb); +void tx3927_setup_pcierr_irq(void); +void tx3927_irq_init(void); +void tx3927_mtd_init(int ch); + +#endif /* __ASM_TXX9_TX3927_H */ diff --git a/arch/mips/include/asm/txx9/tx4927.h b/arch/mips/include/asm/txx9/tx4927.h new file mode 100644 index 000000000000..7d813f1cb98d --- /dev/null +++ b/arch/mips/include/asm/txx9/tx4927.h @@ -0,0 +1,269 @@ +/* + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2006 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_TXX9_TX4927_H +#define __ASM_TXX9_TX4927_H + +#include <linux/types.h> +#include <linux/io.h> +#include <asm/txx9irq.h> +#include <asm/txx9/tx4927pcic.h> + +#ifdef CONFIG_64BIT +#define TX4927_REG_BASE 0xffffffffff1f0000UL +#else +#define TX4927_REG_BASE 0xff1f0000UL +#endif +#define TX4927_REG_SIZE 0x00010000 + +#define TX4927_SDRAMC_REG (TX4927_REG_BASE + 0x8000) +#define TX4927_EBUSC_REG (TX4927_REG_BASE + 0x9000) +#define TX4927_PCIC_REG (TX4927_REG_BASE + 0xd000) +#define TX4927_CCFG_REG (TX4927_REG_BASE + 0xe000) +#define TX4927_IRC_REG (TX4927_REG_BASE + 0xf600) +#define TX4927_NR_TMR 3 +#define TX4927_TMR_REG(ch) (TX4927_REG_BASE + 0xf000 + (ch) * 0x100) +#define TX4927_NR_SIO 2 +#define TX4927_SIO_REG(ch) (TX4927_REG_BASE + 0xf300 + (ch) * 0x100) +#define TX4927_PIO_REG (TX4927_REG_BASE + 0xf500) + +#define TX4927_IR_ECCERR 0 +#define TX4927_IR_WTOERR 1 +#define TX4927_NUM_IR_INT 6 +#define TX4927_IR_INT(n) (2 + (n)) +#define TX4927_NUM_IR_SIO 2 +#define TX4927_IR_SIO(n) (8 + (n)) +#define TX4927_NUM_IR_DMA 4 +#define TX4927_IR_DMA(n) (10 + (n)) +#define TX4927_IR_PIO 14 +#define TX4927_IR_PDMAC 15 +#define TX4927_IR_PCIC 16 +#define TX4927_NUM_IR_TMR 3 +#define TX4927_IR_TMR(n) (17 + (n)) +#define TX4927_IR_PCIERR 22 +#define TX4927_IR_PCIPME 23 +#define TX4927_IR_ACLC 24 +#define TX4927_IR_ACLCPME 25 +#define TX4927_NUM_IR 32 + +#define TX4927_IRC_INT 2 /* IP[2] in Status register */ + +#define TX4927_NUM_PIO 16 + +struct tx4927_sdramc_reg { + u64 cr[4]; + u64 unused0[4]; + u64 tr; + u64 unused1[2]; + u64 cmd; +}; + +struct tx4927_ebusc_reg { + u64 cr[8]; +}; + +struct tx4927_ccfg_reg { + u64 ccfg; + u64 crir; + u64 pcfg; + u64 toea; + u64 clkctr; + u64 unused0; + u64 garbc; + u64 unused1; + u64 unused2; + u64 ramp; +}; + +/* + * CCFG + */ +/* CCFG : Chip Configuration */ +#define TX4927_CCFG_WDRST 0x0000020000000000ULL +#define TX4927_CCFG_WDREXEN 0x0000010000000000ULL +#define TX4927_CCFG_BCFG_MASK 0x000000ff00000000ULL +#define TX4927_CCFG_TINTDIS 0x01000000 +#define TX4927_CCFG_PCI66 0x00800000 +#define TX4927_CCFG_PCIMODE 0x00400000 +#define TX4927_CCFG_DIVMODE_MASK 0x000e0000 +#define TX4927_CCFG_DIVMODE_8 (0x0 << 17) +#define TX4927_CCFG_DIVMODE_12 (0x1 << 17) +#define TX4927_CCFG_DIVMODE_16 (0x2 << 17) +#define TX4927_CCFG_DIVMODE_10 (0x3 << 17) +#define TX4927_CCFG_DIVMODE_2 (0x4 << 17) +#define TX4927_CCFG_DIVMODE_3 (0x5 << 17) +#define TX4927_CCFG_DIVMODE_4 (0x6 << 17) +#define TX4927_CCFG_DIVMODE_2_5 (0x7 << 17) +#define TX4927_CCFG_BEOW 0x00010000 +#define TX4927_CCFG_WR 0x00008000 +#define TX4927_CCFG_TOE 0x00004000 +#define TX4927_CCFG_PCIARB 0x00002000 +#define TX4927_CCFG_PCIDIVMODE_MASK 0x00001800 +#define TX4927_CCFG_PCIDIVMODE_2_5 0x00000000 +#define TX4927_CCFG_PCIDIVMODE_3 0x00000800 +#define TX4927_CCFG_PCIDIVMODE_5 0x00001000 +#define TX4927_CCFG_PCIDIVMODE_6 0x00001800 +#define TX4927_CCFG_SYSSP_MASK 0x000000c0 +#define TX4927_CCFG_ENDIAN 0x00000004 +#define TX4927_CCFG_HALT 0x00000002 +#define TX4927_CCFG_ACEHOLD 0x00000001 +#define TX4927_CCFG_W1CBITS (TX4927_CCFG_WDRST | TX4927_CCFG_BEOW) + +/* PCFG : Pin Configuration */ +#define TX4927_PCFG_SDCLKDLY_MASK 0x30000000 +#define TX4927_PCFG_SDCLKDLY(d) ((d)<<28) +#define TX4927_PCFG_SYSCLKEN 0x08000000 +#define TX4927_PCFG_SDCLKEN_ALL 0x07800000 +#define TX4927_PCFG_SDCLKEN(ch) (0x00800000<<(ch)) +#define TX4927_PCFG_PCICLKEN_ALL 0x003f0000 +#define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) +#define TX4927_PCFG_SEL2 0x00000200 +#define TX4927_PCFG_SEL1 0x00000100 +#define TX4927_PCFG_DMASEL_ALL 0x000000ff +#define TX4927_PCFG_DMASEL0_MASK 0x00000003 +#define TX4927_PCFG_DMASEL1_MASK 0x0000000c +#define TX4927_PCFG_DMASEL2_MASK 0x00000030 +#define TX4927_PCFG_DMASEL3_MASK 0x000000c0 +#define TX4927_PCFG_DMASEL0_DRQ0 0x00000000 +#define TX4927_PCFG_DMASEL0_SIO1 0x00000001 +#define TX4927_PCFG_DMASEL0_ACL0 0x00000002 +#define TX4927_PCFG_DMASEL0_ACL2 0x00000003 +#define TX4927_PCFG_DMASEL1_DRQ1 0x00000000 +#define TX4927_PCFG_DMASEL1_SIO1 0x00000004 +#define TX4927_PCFG_DMASEL1_ACL1 0x00000008 +#define TX4927_PCFG_DMASEL1_ACL3 0x0000000c +#define TX4927_PCFG_DMASEL2_DRQ2 0x00000000 /* SEL2=0 */ +#define TX4927_PCFG_DMASEL2_SIO0 0x00000010 /* SEL2=0 */ +#define TX4927_PCFG_DMASEL2_ACL1 0x00000000 /* SEL2=1 */ +#define TX4927_PCFG_DMASEL2_ACL2 0x00000020 /* SEL2=1 */ +#define TX4927_PCFG_DMASEL2_ACL0 0x00000030 /* SEL2=1 */ +#define TX4927_PCFG_DMASEL3_DRQ3 0x00000000 +#define TX4927_PCFG_DMASEL3_SIO0 0x00000040 +#define TX4927_PCFG_DMASEL3_ACL3 0x00000080 +#define TX4927_PCFG_DMASEL3_ACL1 0x000000c0 + +/* CLKCTR : Clock Control */ +#define TX4927_CLKCTR_ACLCKD 0x02000000 +#define TX4927_CLKCTR_PIOCKD 0x01000000 +#define TX4927_CLKCTR_DMACKD 0x00800000 +#define TX4927_CLKCTR_PCICKD 0x00400000 +#define TX4927_CLKCTR_TM0CKD 0x00100000 +#define TX4927_CLKCTR_TM1CKD 0x00080000 +#define TX4927_CLKCTR_TM2CKD 0x00040000 +#define TX4927_CLKCTR_SIO0CKD 0x00020000 +#define TX4927_CLKCTR_SIO1CKD 0x00010000 +#define TX4927_CLKCTR_ACLRST 0x00000200 +#define TX4927_CLKCTR_PIORST 0x00000100 +#define TX4927_CLKCTR_DMARST 0x00000080 +#define TX4927_CLKCTR_PCIRST 0x00000040 +#define TX4927_CLKCTR_TM0RST 0x00000010 +#define TX4927_CLKCTR_TM1RST 0x00000008 +#define TX4927_CLKCTR_TM2RST 0x00000004 +#define TX4927_CLKCTR_SIO0RST 0x00000002 +#define TX4927_CLKCTR_SIO1RST 0x00000001 + +#define tx4927_sdramcptr \ + ((struct tx4927_sdramc_reg __iomem *)TX4927_SDRAMC_REG) +#define tx4927_pcicptr \ + ((struct tx4927_pcic_reg __iomem *)TX4927_PCIC_REG) +#define tx4927_ccfgptr \ + ((struct tx4927_ccfg_reg __iomem *)TX4927_CCFG_REG) +#define tx4927_ebuscptr \ + ((struct tx4927_ebusc_reg __iomem *)TX4927_EBUSC_REG) +#define tx4927_pioptr ((struct txx9_pio_reg __iomem *)TX4927_PIO_REG) + +#define TX4927_REV_PCODE() \ + ((__u32)__raw_readq(&tx4927_ccfgptr->crir) >> 16) + +#define TX4927_SDRAMC_CR(ch) __raw_readq(&tx4927_sdramcptr->cr[(ch)]) +#define TX4927_SDRAMC_BA(ch) ((TX4927_SDRAMC_CR(ch) >> 49) << 21) +#define TX4927_SDRAMC_SIZE(ch) \ + ((((TX4927_SDRAMC_CR(ch) >> 33) & 0x7fff) + 1) << 21) + +#define TX4927_EBUSC_CR(ch) __raw_readq(&tx4927_ebuscptr->cr[(ch)]) +#define TX4927_EBUSC_BA(ch) ((TX4927_EBUSC_CR(ch) >> 48) << 20) +#define TX4927_EBUSC_SIZE(ch) \ + (0x00100000 << ((unsigned long)(TX4927_EBUSC_CR(ch) >> 8) & 0xf)) +#define TX4927_EBUSC_WIDTH(ch) \ + (64 >> ((__u32)(TX4927_EBUSC_CR(ch) >> 20) & 0x3)) + +/* utilities */ +static inline void txx9_clear64(__u64 __iomem *adr, __u64 bits) +{ +#ifdef CONFIG_32BIT + unsigned long flags; + local_irq_save(flags); +#endif + ____raw_writeq(____raw_readq(adr) & ~bits, adr); +#ifdef CONFIG_32BIT + local_irq_restore(flags); +#endif +} +static inline void txx9_set64(__u64 __iomem *adr, __u64 bits) +{ +#ifdef CONFIG_32BIT + unsigned long flags; + local_irq_save(flags); +#endif + ____raw_writeq(____raw_readq(adr) | bits, adr); +#ifdef CONFIG_32BIT + local_irq_restore(flags); +#endif +} + +/* These functions are not interrupt safe. */ +static inline void tx4927_ccfg_clear(__u64 bits) +{ + ____raw_writeq(____raw_readq(&tx4927_ccfgptr->ccfg) + & ~(TX4927_CCFG_W1CBITS | bits), + &tx4927_ccfgptr->ccfg); +} +static inline void tx4927_ccfg_set(__u64 bits) +{ + ____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg) + & ~TX4927_CCFG_W1CBITS) | bits, + &tx4927_ccfgptr->ccfg); +} +static inline void tx4927_ccfg_change(__u64 change, __u64 new) +{ + ____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg) + & ~(TX4927_CCFG_W1CBITS | change)) | + new, + &tx4927_ccfgptr->ccfg); +} + +unsigned int tx4927_get_mem_size(void); +void tx4927_wdt_init(void); +void tx4927_setup(void); +void tx4927_time_init(unsigned int tmrnr); +void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask); +int tx4927_report_pciclk(void); +int tx4927_pciclk66_setup(void); +void tx4927_setup_pcierr_irq(void); +void tx4927_irq_init(void); +void tx4927_mtd_init(int ch); + +#endif /* __ASM_TXX9_TX4927_H */ diff --git a/arch/mips/include/asm/txx9/tx4927pcic.h b/arch/mips/include/asm/txx9/tx4927pcic.h new file mode 100644 index 000000000000..c470b8a5fe57 --- /dev/null +++ b/arch/mips/include/asm/txx9/tx4927pcic.h @@ -0,0 +1,203 @@ +/* + * include/asm-mips/txx9/tx4927pcic.h + * TX4927 PCI controller definitions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9_TX4927PCIC_H +#define __ASM_TXX9_TX4927PCIC_H + +#include <linux/pci.h> +#include <linux/irqreturn.h> + +struct tx4927_pcic_reg { + u32 pciid; + u32 pcistatus; + u32 pciccrev; + u32 pcicfg1; + u32 p2gm0plbase; /* +10 */ + u32 p2gm0pubase; + u32 p2gm1plbase; + u32 p2gm1pubase; + u32 p2gm2pbase; /* +20 */ + u32 p2giopbase; + u32 unused0; + u32 pcisid; + u32 unused1; /* +30 */ + u32 pcicapptr; + u32 unused2; + u32 pcicfg2; + u32 g2ptocnt; /* +40 */ + u32 unused3[15]; + u32 g2pstatus; /* +80 */ + u32 g2pmask; + u32 pcisstatus; + u32 pcimask; + u32 p2gcfg; /* +90 */ + u32 p2gstatus; + u32 p2gmask; + u32 p2gccmd; + u32 unused4[24]; /* +a0 */ + u32 pbareqport; /* +100 */ + u32 pbacfg; + u32 pbastatus; + u32 pbamask; + u32 pbabm; /* +110 */ + u32 pbacreq; + u32 pbacgnt; + u32 pbacstate; + u64 g2pmgbase[3]; /* +120 */ + u64 g2piogbase; + u32 g2pmmask[3]; /* +140 */ + u32 g2piomask; + u64 g2pmpbase[3]; /* +150 */ + u64 g2piopbase; + u32 pciccfg; /* +170 */ + u32 pcicstatus; + u32 pcicmask; + u32 unused5; + u64 p2gmgbase[3]; /* +180 */ + u64 p2giogbase; + u32 g2pcfgadrs; /* +1a0 */ + u32 g2pcfgdata; + u32 unused6[8]; + u32 g2pintack; + u32 g2pspc; + u32 unused7[12]; /* +1d0 */ + u64 pdmca; /* +200 */ + u64 pdmga; + u64 pdmpa; + u64 pdmctr; + u64 pdmcfg; /* +220 */ + u64 pdmsts; +}; + +/* bits for PCICMD */ +/* see PCI_COMMAND_XXX in linux/pci_regs.h */ + +/* bits for PCISTAT */ +/* see PCI_STATUS_XXX in linux/pci_regs.h */ + +/* bits for IOBA/MBA */ +/* see PCI_BASE_ADDRESS_XXX in linux/pci_regs.h */ + +/* bits for G2PSTATUS/G2PMASK */ +#define TX4927_PCIC_G2PSTATUS_ALL 0x00000003 +#define TX4927_PCIC_G2PSTATUS_TTOE 0x00000002 +#define TX4927_PCIC_G2PSTATUS_RTOE 0x00000001 + +/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci_regs.h */ +#define TX4927_PCIC_PCISTATUS_ALL 0x0000f900 + +/* bits for PBACFG */ +#define TX4927_PCIC_PBACFG_FIXPA 0x00000008 +#define TX4927_PCIC_PBACFG_RPBA 0x00000004 +#define TX4927_PCIC_PBACFG_PBAEN 0x00000002 +#define TX4927_PCIC_PBACFG_BMCEN 0x00000001 + +/* bits for PBASTATUS/PBAMASK */ +#define TX4927_PCIC_PBASTATUS_ALL 0x00000001 +#define TX4927_PCIC_PBASTATUS_BM 0x00000001 + +/* bits for G2PMnGBASE */ +#define TX4927_PCIC_G2PMnGBASE_BSDIS 0x0000002000000000ULL +#define TX4927_PCIC_G2PMnGBASE_ECHG 0x0000001000000000ULL + +/* bits for G2PIOGBASE */ +#define TX4927_PCIC_G2PIOGBASE_BSDIS 0x0000002000000000ULL +#define TX4927_PCIC_G2PIOGBASE_ECHG 0x0000001000000000ULL + +/* bits for PCICSTATUS/PCICMASK */ +#define TX4927_PCIC_PCICSTATUS_ALL 0x000007b8 +#define TX4927_PCIC_PCICSTATUS_PME 0x00000400 +#define TX4927_PCIC_PCICSTATUS_TLB 0x00000200 +#define TX4927_PCIC_PCICSTATUS_NIB 0x00000100 +#define TX4927_PCIC_PCICSTATUS_ZIB 0x00000080 +#define TX4927_PCIC_PCICSTATUS_PERR 0x00000020 +#define TX4927_PCIC_PCICSTATUS_SERR 0x00000010 +#define TX4927_PCIC_PCICSTATUS_GBE 0x00000008 +#define TX4927_PCIC_PCICSTATUS_IWB 0x00000002 +#define TX4927_PCIC_PCICSTATUS_E2PDONE 0x00000001 + +/* bits for PCICCFG */ +#define TX4927_PCIC_PCICCFG_GBWC_MASK 0x0fff0000 +#define TX4927_PCIC_PCICCFG_HRST 0x00000800 +#define TX4927_PCIC_PCICCFG_SRST 0x00000400 +#define TX4927_PCIC_PCICCFG_IRBER 0x00000200 +#define TX4927_PCIC_PCICCFG_G2PMEN(ch) (0x00000100>>(ch)) +#define TX4927_PCIC_PCICCFG_G2PM0EN 0x00000100 +#define TX4927_PCIC_PCICCFG_G2PM1EN 0x00000080 +#define TX4927_PCIC_PCICCFG_G2PM2EN 0x00000040 +#define TX4927_PCIC_PCICCFG_G2PIOEN 0x00000020 +#define TX4927_PCIC_PCICCFG_TCAR 0x00000010 +#define TX4927_PCIC_PCICCFG_ICAEN 0x00000008 + +/* bits for P2GMnGBASE */ +#define TX4927_PCIC_P2GMnGBASE_TMEMEN 0x0000004000000000ULL +#define TX4927_PCIC_P2GMnGBASE_TBSDIS 0x0000002000000000ULL +#define TX4927_PCIC_P2GMnGBASE_TECHG 0x0000001000000000ULL + +/* bits for P2GIOGBASE */ +#define TX4927_PCIC_P2GIOGBASE_TIOEN 0x0000004000000000ULL +#define TX4927_PCIC_P2GIOGBASE_TBSDIS 0x0000002000000000ULL +#define TX4927_PCIC_P2GIOGBASE_TECHG 0x0000001000000000ULL + +#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) +#define TX4927_PCIC_MAX_DEVNU TX4927_PCIC_IDSEL_AD_TO_SLOT(32) + +/* bits for PDMCFG */ +#define TX4927_PCIC_PDMCFG_RSTFIFO 0x00200000 +#define TX4927_PCIC_PDMCFG_EXFER 0x00100000 +#define TX4927_PCIC_PDMCFG_REQDLY_MASK 0x00003800 +#define TX4927_PCIC_PDMCFG_REQDLY_NONE (0 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_16 (1 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_32 (2 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_64 (3 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_128 (4 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_256 (5 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_512 (6 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_1024 (7 << 11) +#define TX4927_PCIC_PDMCFG_ERRIE 0x00000400 +#define TX4927_PCIC_PDMCFG_NCCMPIE 0x00000200 +#define TX4927_PCIC_PDMCFG_NTCMPIE 0x00000100 +#define TX4927_PCIC_PDMCFG_CHNEN 0x00000080 +#define TX4927_PCIC_PDMCFG_XFRACT 0x00000040 +#define TX4927_PCIC_PDMCFG_BSWAP 0x00000020 +#define TX4927_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c +#define TX4927_PCIC_PDMCFG_XFRSIZE_1DW 0x00000000 +#define TX4927_PCIC_PDMCFG_XFRSIZE_1QW 0x00000004 +#define TX4927_PCIC_PDMCFG_XFRSIZE_4QW 0x00000008 +#define TX4927_PCIC_PDMCFG_XFRDIRC 0x00000002 +#define TX4927_PCIC_PDMCFG_CHRST 0x00000001 + +/* bits for PDMSTS */ +#define TX4927_PCIC_PDMSTS_REQCNT_MASK 0x3f000000 +#define TX4927_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000 +#define TX4927_PCIC_PDMSTS_FIFOWP_MASK 0x000c0000 +#define TX4927_PCIC_PDMSTS_FIFORP_MASK 0x00030000 +#define TX4927_PCIC_PDMSTS_ERRINT 0x00000800 +#define TX4927_PCIC_PDMSTS_DONEINT 0x00000400 +#define TX4927_PCIC_PDMSTS_CHNEN 0x00000200 +#define TX4927_PCIC_PDMSTS_XFRACT 0x00000100 +#define TX4927_PCIC_PDMSTS_ACCMP 0x00000080 +#define TX4927_PCIC_PDMSTS_NCCMP 0x00000040 +#define TX4927_PCIC_PDMSTS_NTCMP 0x00000020 +#define TX4927_PCIC_PDMSTS_CFGERR 0x00000008 +#define TX4927_PCIC_PDMSTS_PCIERR 0x00000004 +#define TX4927_PCIC_PDMSTS_CHNERR 0x00000002 +#define TX4927_PCIC_PDMSTS_DATAERR 0x00000001 +#define TX4927_PCIC_PDMSTS_ALL_CMP 0x000000e0 +#define TX4927_PCIC_PDMSTS_ALL_ERR 0x0000000f + +struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr( + struct pci_controller *channel); +void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, + struct pci_controller *channel, int extarb); +void tx4927_report_pcic_status(void); +char *tx4927_pcibios_setup(char *str); +void tx4927_dump_pcic_settings(void); +irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id); + +#endif /* __ASM_TXX9_TX4927PCIC_H */ diff --git a/arch/mips/include/asm/txx9/tx4938.h b/arch/mips/include/asm/txx9/tx4938.h new file mode 100644 index 000000000000..989e7751135a --- /dev/null +++ b/arch/mips/include/asm/txx9/tx4938.h @@ -0,0 +1,295 @@ +/* + * Definitions for TX4937/TX4938 + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#ifndef __ASM_TXX9_TX4938_H +#define __ASM_TXX9_TX4938_H + +/* some controllers are compatible with 4927 */ +#include <asm/txx9/tx4927.h> + +#ifdef CONFIG_64BIT +#define TX4938_REG_BASE 0xffffffffff1f0000UL /* == TX4937_REG_BASE */ +#else +#define TX4938_REG_BASE 0xff1f0000UL /* == TX4937_REG_BASE */ +#endif +#define TX4938_REG_SIZE 0x00010000 /* == TX4937_REG_SIZE */ + +/* NDFMC, SRAMC, PCIC1, SPIC: TX4938 only */ +#define TX4938_NDFMC_REG (TX4938_REG_BASE + 0x5000) +#define TX4938_SRAMC_REG (TX4938_REG_BASE + 0x6000) +#define TX4938_PCIC1_REG (TX4938_REG_BASE + 0x7000) +#define TX4938_SDRAMC_REG (TX4938_REG_BASE + 0x8000) +#define TX4938_EBUSC_REG (TX4938_REG_BASE + 0x9000) +#define TX4938_DMA_REG(ch) (TX4938_REG_BASE + 0xb000 + (ch) * 0x800) +#define TX4938_PCIC_REG (TX4938_REG_BASE + 0xd000) +#define TX4938_CCFG_REG (TX4938_REG_BASE + 0xe000) +#define TX4938_NR_TMR 3 +#define TX4938_TMR_REG(ch) ((TX4938_REG_BASE + 0xf000) + (ch) * 0x100) +#define TX4938_NR_SIO 2 +#define TX4938_SIO_REG(ch) ((TX4938_REG_BASE + 0xf300) + (ch) * 0x100) +#define TX4938_PIO_REG (TX4938_REG_BASE + 0xf500) +#define TX4938_IRC_REG (TX4938_REG_BASE + 0xf600) +#define TX4938_ACLC_REG (TX4938_REG_BASE + 0xf700) +#define TX4938_SPI_REG (TX4938_REG_BASE + 0xf800) + +struct tx4938_sramc_reg { + u64 cr; +}; + +struct tx4938_ccfg_reg { + u64 ccfg; + u64 crir; + u64 pcfg; + u64 toea; + u64 clkctr; + u64 unused0; + u64 garbc; + u64 unused1; + u64 unused2; + u64 ramp; + u64 unused3; + u64 jmpadr; +}; + +/* + * IRC + */ + +#define TX4938_IR_ECCERR 0 +#define TX4938_IR_WTOERR 1 +#define TX4938_NUM_IR_INT 6 +#define TX4938_IR_INT(n) (2 + (n)) +#define TX4938_NUM_IR_SIO 2 +#define TX4938_IR_SIO(n) (8 + (n)) +#define TX4938_NUM_IR_DMA 4 +#define TX4938_IR_DMA(ch, n) ((ch ? 27 : 10) + (n)) /* 10-13, 27-30 */ +#define TX4938_IR_PIO 14 +#define TX4938_IR_PDMAC 15 +#define TX4938_IR_PCIC 16 +#define TX4938_NUM_IR_TMR 3 +#define TX4938_IR_TMR(n) (17 + (n)) +#define TX4938_IR_NDFMC 21 +#define TX4938_IR_PCIERR 22 +#define TX4938_IR_PCIPME 23 +#define TX4938_IR_ACLC 24 +#define TX4938_IR_ACLCPME 25 +#define TX4938_IR_PCIC1 26 +#define TX4938_IR_SPI 31 +#define TX4938_NUM_IR 32 +/* multiplex */ +#define TX4938_IR_ETH0 TX4938_IR_INT(4) +#define TX4938_IR_ETH1 TX4938_IR_INT(3) + +#define TX4938_IRC_INT 2 /* IP[2] in Status register */ + +#define TX4938_NUM_PIO 16 + +/* + * CCFG + */ +/* CCFG : Chip Configuration */ +#define TX4938_CCFG_WDRST 0x0000020000000000ULL +#define TX4938_CCFG_WDREXEN 0x0000010000000000ULL +#define TX4938_CCFG_BCFG_MASK 0x000000ff00000000ULL +#define TX4938_CCFG_TINTDIS 0x01000000 +#define TX4938_CCFG_PCI66 0x00800000 +#define TX4938_CCFG_PCIMODE 0x00400000 +#define TX4938_CCFG_PCI1_66 0x00200000 +#define TX4938_CCFG_DIVMODE_MASK 0x001e0000 +#define TX4938_CCFG_DIVMODE_2 (0x4 << 17) +#define TX4938_CCFG_DIVMODE_2_5 (0xf << 17) +#define TX4938_CCFG_DIVMODE_3 (0x5 << 17) +#define TX4938_CCFG_DIVMODE_4 (0x6 << 17) +#define TX4938_CCFG_DIVMODE_4_5 (0xd << 17) +#define TX4938_CCFG_DIVMODE_8 (0x0 << 17) +#define TX4938_CCFG_DIVMODE_10 (0xb << 17) +#define TX4938_CCFG_DIVMODE_12 (0x1 << 17) +#define TX4938_CCFG_DIVMODE_16 (0x2 << 17) +#define TX4938_CCFG_DIVMODE_18 (0x9 << 17) +#define TX4938_CCFG_BEOW 0x00010000 +#define TX4938_CCFG_WR 0x00008000 +#define TX4938_CCFG_TOE 0x00004000 +#define TX4938_CCFG_PCIARB 0x00002000 +#define TX4938_CCFG_PCIDIVMODE_MASK 0x00001c00 +#define TX4938_CCFG_PCIDIVMODE_4 (0x1 << 10) +#define TX4938_CCFG_PCIDIVMODE_4_5 (0x3 << 10) +#define TX4938_CCFG_PCIDIVMODE_5 (0x5 << 10) +#define TX4938_CCFG_PCIDIVMODE_5_5 (0x7 << 10) +#define TX4938_CCFG_PCIDIVMODE_8 (0x0 << 10) +#define TX4938_CCFG_PCIDIVMODE_9 (0x2 << 10) +#define TX4938_CCFG_PCIDIVMODE_10 (0x4 << 10) +#define TX4938_CCFG_PCIDIVMODE_11 (0x6 << 10) +#define TX4938_CCFG_PCI1DMD 0x00000100 +#define TX4938_CCFG_SYSSP_MASK 0x000000c0 +#define TX4938_CCFG_ENDIAN 0x00000004 +#define TX4938_CCFG_HALT 0x00000002 +#define TX4938_CCFG_ACEHOLD 0x00000001 + +/* PCFG : Pin Configuration */ +#define TX4938_PCFG_ETH0_SEL 0x8000000000000000ULL +#define TX4938_PCFG_ETH1_SEL 0x4000000000000000ULL +#define TX4938_PCFG_ATA_SEL 0x2000000000000000ULL +#define TX4938_PCFG_ISA_SEL 0x1000000000000000ULL +#define TX4938_PCFG_SPI_SEL 0x0800000000000000ULL +#define TX4938_PCFG_NDF_SEL 0x0400000000000000ULL +#define TX4938_PCFG_SDCLKDLY_MASK 0x30000000 +#define TX4938_PCFG_SDCLKDLY(d) ((d)<<28) +#define TX4938_PCFG_SYSCLKEN 0x08000000 +#define TX4938_PCFG_SDCLKEN_ALL 0x07800000 +#define TX4938_PCFG_SDCLKEN(ch) (0x00800000<<(ch)) +#define TX4938_PCFG_PCICLKEN_ALL 0x003f0000 +#define TX4938_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) +#define TX4938_PCFG_SEL2 0x00000200 +#define TX4938_PCFG_SEL1 0x00000100 +#define TX4938_PCFG_DMASEL_ALL 0x0000000f +#define TX4938_PCFG_DMASEL0_DRQ0 0x00000000 +#define TX4938_PCFG_DMASEL0_SIO1 0x00000001 +#define TX4938_PCFG_DMASEL1_DRQ1 0x00000000 +#define TX4938_PCFG_DMASEL1_SIO1 0x00000002 +#define TX4938_PCFG_DMASEL2_DRQ2 0x00000000 +#define TX4938_PCFG_DMASEL2_SIO0 0x00000004 +#define TX4938_PCFG_DMASEL3_DRQ3 0x00000000 +#define TX4938_PCFG_DMASEL3_SIO0 0x00000008 + +/* CLKCTR : Clock Control */ +#define TX4938_CLKCTR_NDFCKD 0x0001000000000000ULL +#define TX4938_CLKCTR_NDFRST 0x0000000100000000ULL +#define TX4938_CLKCTR_ETH1CKD 0x80000000 +#define TX4938_CLKCTR_ETH0CKD 0x40000000 +#define TX4938_CLKCTR_SPICKD 0x20000000 +#define TX4938_CLKCTR_SRAMCKD 0x10000000 +#define TX4938_CLKCTR_PCIC1CKD 0x08000000 +#define TX4938_CLKCTR_DMA1CKD 0x04000000 +#define TX4938_CLKCTR_ACLCKD 0x02000000 +#define TX4938_CLKCTR_PIOCKD 0x01000000 +#define TX4938_CLKCTR_DMACKD 0x00800000 +#define TX4938_CLKCTR_PCICKD 0x00400000 +#define TX4938_CLKCTR_TM0CKD 0x00100000 +#define TX4938_CLKCTR_TM1CKD 0x00080000 +#define TX4938_CLKCTR_TM2CKD 0x00040000 +#define TX4938_CLKCTR_SIO0CKD 0x00020000 +#define TX4938_CLKCTR_SIO1CKD 0x00010000 +#define TX4938_CLKCTR_ETH1RST 0x00008000 +#define TX4938_CLKCTR_ETH0RST 0x00004000 +#define TX4938_CLKCTR_SPIRST 0x00002000 +#define TX4938_CLKCTR_SRAMRST 0x00001000 +#define TX4938_CLKCTR_PCIC1RST 0x00000800 +#define TX4938_CLKCTR_DMA1RST 0x00000400 +#define TX4938_CLKCTR_ACLRST 0x00000200 +#define TX4938_CLKCTR_PIORST 0x00000100 +#define TX4938_CLKCTR_DMARST 0x00000080 +#define TX4938_CLKCTR_PCIRST 0x00000040 +#define TX4938_CLKCTR_TM0RST 0x00000010 +#define TX4938_CLKCTR_TM1RST 0x00000008 +#define TX4938_CLKCTR_TM2RST 0x00000004 +#define TX4938_CLKCTR_SIO0RST 0x00000002 +#define TX4938_CLKCTR_SIO1RST 0x00000001 + +/* + * DMA + */ +/* bits for MCR */ +#define TX4938_DMA_MCR_EIS(ch) (0x10000000<<(ch)) +#define TX4938_DMA_MCR_DIS(ch) (0x01000000<<(ch)) +#define TX4938_DMA_MCR_RSFIF 0x00000080 +#define TX4938_DMA_MCR_FIFUM(ch) (0x00000008<<(ch)) +#define TX4938_DMA_MCR_RPRT 0x00000002 +#define TX4938_DMA_MCR_MSTEN 0x00000001 + +/* bits for CCRn */ +#define TX4938_DMA_CCR_IMMCHN 0x20000000 +#define TX4938_DMA_CCR_USEXFSZ 0x10000000 +#define TX4938_DMA_CCR_LE 0x08000000 +#define TX4938_DMA_CCR_DBINH 0x04000000 +#define TX4938_DMA_CCR_SBINH 0x02000000 +#define TX4938_DMA_CCR_CHRST 0x01000000 +#define TX4938_DMA_CCR_RVBYTE 0x00800000 +#define TX4938_DMA_CCR_ACKPOL 0x00400000 +#define TX4938_DMA_CCR_REQPL 0x00200000 +#define TX4938_DMA_CCR_EGREQ 0x00100000 +#define TX4938_DMA_CCR_CHDN 0x00080000 +#define TX4938_DMA_CCR_DNCTL 0x00060000 +#define TX4938_DMA_CCR_EXTRQ 0x00010000 +#define TX4938_DMA_CCR_INTRQD 0x0000e000 +#define TX4938_DMA_CCR_INTENE 0x00001000 +#define TX4938_DMA_CCR_INTENC 0x00000800 +#define TX4938_DMA_CCR_INTENT 0x00000400 +#define TX4938_DMA_CCR_CHNEN 0x00000200 +#define TX4938_DMA_CCR_XFACT 0x00000100 +#define TX4938_DMA_CCR_SMPCHN 0x00000020 +#define TX4938_DMA_CCR_XFSZ(order) (((order) << 2) & 0x0000001c) +#define TX4938_DMA_CCR_XFSZ_1W TX4938_DMA_CCR_XFSZ(2) +#define TX4938_DMA_CCR_XFSZ_2W TX4938_DMA_CCR_XFSZ(3) +#define TX4938_DMA_CCR_XFSZ_4W TX4938_DMA_CCR_XFSZ(4) +#define TX4938_DMA_CCR_XFSZ_8W TX4938_DMA_CCR_XFSZ(5) +#define TX4938_DMA_CCR_XFSZ_16W TX4938_DMA_CCR_XFSZ(6) +#define TX4938_DMA_CCR_XFSZ_32W TX4938_DMA_CCR_XFSZ(7) +#define TX4938_DMA_CCR_MEMIO 0x00000002 +#define TX4938_DMA_CCR_SNGAD 0x00000001 + +/* bits for CSRn */ +#define TX4938_DMA_CSR_CHNEN 0x00000400 +#define TX4938_DMA_CSR_STLXFER 0x00000200 +#define TX4938_DMA_CSR_CHNACT 0x00000100 +#define TX4938_DMA_CSR_ABCHC 0x00000080 +#define TX4938_DMA_CSR_NCHNC 0x00000040 +#define TX4938_DMA_CSR_NTRNFC 0x00000020 +#define TX4938_DMA_CSR_EXTDN 0x00000010 +#define TX4938_DMA_CSR_CFERR 0x00000008 +#define TX4938_DMA_CSR_CHERR 0x00000004 +#define TX4938_DMA_CSR_DESERR 0x00000002 +#define TX4938_DMA_CSR_SORERR 0x00000001 + +#define tx4938_sdramcptr tx4927_sdramcptr +#define tx4938_ebuscptr tx4927_ebuscptr +#define tx4938_pcicptr tx4927_pcicptr +#define tx4938_pcic1ptr \ + ((struct tx4927_pcic_reg __iomem *)TX4938_PCIC1_REG) +#define tx4938_ccfgptr \ + ((struct tx4938_ccfg_reg __iomem *)TX4938_CCFG_REG) +#define tx4938_pioptr ((struct txx9_pio_reg __iomem *)TX4938_PIO_REG) +#define tx4938_sramcptr \ + ((struct tx4938_sramc_reg __iomem *)TX4938_SRAMC_REG) + + +#define TX4938_REV_PCODE() \ + ((__u32)__raw_readq(&tx4938_ccfgptr->crir) >> 16) + +#define tx4938_ccfg_clear(bits) tx4927_ccfg_clear(bits) +#define tx4938_ccfg_set(bits) tx4927_ccfg_set(bits) +#define tx4938_ccfg_change(change, new) tx4927_ccfg_change(change, new) + +#define TX4938_SDRAMC_CR(ch) TX4927_SDRAMC_CR(ch) +#define TX4938_SDRAMC_BA(ch) TX4927_SDRAMC_BA(ch) +#define TX4938_SDRAMC_SIZE(ch) TX4927_SDRAMC_SIZE(ch) + +#define TX4938_EBUSC_CR(ch) TX4927_EBUSC_CR(ch) +#define TX4938_EBUSC_BA(ch) TX4927_EBUSC_BA(ch) +#define TX4938_EBUSC_SIZE(ch) TX4927_EBUSC_SIZE(ch) +#define TX4938_EBUSC_WIDTH(ch) TX4927_EBUSC_WIDTH(ch) + +#define tx4938_get_mem_size() tx4927_get_mem_size() +void tx4938_wdt_init(void); +void tx4938_setup(void); +void tx4938_time_init(unsigned int tmrnr); +void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask); +void tx4938_spi_init(int busid); +void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1); +int tx4938_report_pciclk(void); +void tx4938_report_pci1clk(void); +int tx4938_pciclk66_setup(void); +struct pci_dev; +int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot); +void tx4938_setup_pcierr_irq(void); +void tx4938_irq_init(void); +void tx4938_mtd_init(int ch); + +#endif diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h new file mode 100644 index 000000000000..88badb423010 --- /dev/null +++ b/arch/mips/include/asm/txx9/tx4939.h @@ -0,0 +1,545 @@ +/* + * Definitions for TX4939 + * + * Copyright (C) 2000-2001,2005-2006 Toshiba Corporation + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_TXX9_TX4939_H +#define __ASM_TXX9_TX4939_H + +/* some controllers are compatible with 4927/4938 */ +#include <asm/txx9/tx4938.h> + +#ifdef CONFIG_64BIT +#define TX4939_REG_BASE 0xffffffffff1f0000UL /* == TX4938_REG_BASE */ +#else +#define TX4939_REG_BASE 0xff1f0000UL /* == TX4938_REG_BASE */ +#endif +#define TX4939_REG_SIZE 0x00010000 /* == TX4938_REG_SIZE */ + +#define TX4939_ATA_REG(ch) (TX4939_REG_BASE + 0x3000 + (ch) * 0x1000) +#define TX4939_NDFMC_REG (TX4939_REG_BASE + 0x5000) +#define TX4939_SRAMC_REG (TX4939_REG_BASE + 0x6000) +#define TX4939_CRYPTO_REG (TX4939_REG_BASE + 0x6800) +#define TX4939_PCIC1_REG (TX4939_REG_BASE + 0x7000) +#define TX4939_DDRC_REG (TX4939_REG_BASE + 0x8000) +#define TX4939_EBUSC_REG (TX4939_REG_BASE + 0x9000) +#define TX4939_VPC_REG (TX4939_REG_BASE + 0xa000) +#define TX4939_DMA_REG(ch) (TX4939_REG_BASE + 0xb000 + (ch) * 0x800) +#define TX4939_PCIC_REG (TX4939_REG_BASE + 0xd000) +#define TX4939_CCFG_REG (TX4939_REG_BASE + 0xe000) +#define TX4939_IRC_REG (TX4939_REG_BASE + 0xe800) +#define TX4939_NR_TMR 6 /* 0xf000,0xf100,0xf200,0xfd00,0xfe00,0xff00 */ +#define TX4939_TMR_REG(ch) \ + (TX4939_REG_BASE + 0xf000 + ((ch) + ((ch) >= 3) * 10) * 0x100) +#define TX4939_NR_SIO 4 /* 0xf300, 0xf400, 0xf380, 0xf480 */ +#define TX4939_SIO_REG(ch) \ + (TX4939_REG_BASE + 0xf300 + (((ch) & 1) << 8) + (((ch) & 2) << 6)) +#define TX4939_ACLC_REG (TX4939_REG_BASE + 0xf700) +#define TX4939_SPI_REG (TX4939_REG_BASE + 0xf800) +#define TX4939_I2C_REG (TX4939_REG_BASE + 0xf900) +#define TX4939_I2S_REG (TX4939_REG_BASE + 0xfa00) +#define TX4939_RTC_REG (TX4939_REG_BASE + 0xfb00) +#define TX4939_CIR_REG (TX4939_REG_BASE + 0xfc00) + +struct tx4939_le_reg { + __u32 r; + __u32 unused; +}; + +struct tx4939_ddrc_reg { + struct tx4939_le_reg ctl[47]; + __u64 unused0[17]; + __u64 winen; + __u64 win[4]; +}; + +struct tx4939_ccfg_reg { + __u64 ccfg; + __u64 crir; + __u64 pcfg; + __u64 toea; + __u64 clkctr; + __u64 unused0; + __u64 garbc; + __u64 unused1[2]; + __u64 ramp; + __u64 unused2[2]; + __u64 dskwctrl; + __u64 mclkosc; + __u64 mclkctl; + __u64 unused3[17]; + struct { + __u64 mr; + __u64 dr; + } gpio[2]; +}; + +struct tx4939_irc_reg { + struct tx4939_le_reg den; + struct tx4939_le_reg scipb; + struct tx4939_le_reg dm[2]; + struct tx4939_le_reg lvl[16]; + struct tx4939_le_reg msk; + struct tx4939_le_reg edc; + struct tx4939_le_reg pnd0; + struct tx4939_le_reg cs; + struct tx4939_le_reg pnd1; + struct tx4939_le_reg dm2[2]; + struct tx4939_le_reg dbr[2]; + struct tx4939_le_reg dben; + struct tx4939_le_reg unused0[2]; + struct tx4939_le_reg flag[2]; + struct tx4939_le_reg pol; + struct tx4939_le_reg cnt; + struct tx4939_le_reg maskint; + struct tx4939_le_reg maskext; +}; + +struct tx4939_rtc_reg { + __u32 ctl; + __u32 adr; + __u32 dat; + __u32 tbc; +}; + +struct tx4939_crypto_reg { + struct tx4939_le_reg csr; + struct tx4939_le_reg idesptr; + struct tx4939_le_reg cdesptr; + struct tx4939_le_reg buserr; + struct tx4939_le_reg cip_tout; + struct tx4939_le_reg cir; + union { + struct { + struct tx4939_le_reg data[8]; + struct tx4939_le_reg ctrl; + } gen; + struct { + struct { + struct tx4939_le_reg l; + struct tx4939_le_reg u; + } key[3], ini; + struct tx4939_le_reg ctrl; + } des; + struct { + struct tx4939_le_reg key[4]; + struct tx4939_le_reg ini[4]; + struct tx4939_le_reg ctrl; + } aes; + struct { + struct { + struct tx4939_le_reg l; + struct tx4939_le_reg u; + } cnt; + struct tx4939_le_reg ini[5]; + struct tx4939_le_reg unused; + struct tx4939_le_reg ctrl; + } hash; + } cdr; + struct tx4939_le_reg unused0[7]; + struct tx4939_le_reg rcsr; + struct tx4939_le_reg rpr; + __u64 rdr; + __u64 ror[3]; + struct tx4939_le_reg unused1[2]; + struct tx4939_le_reg xorslr; + struct tx4939_le_reg xorsur; +}; + +struct tx4939_crypto_desc { + __u32 src; + __u32 dst; + __u32 next; + __u32 ctrl; + __u32 index; + __u32 xor; +}; + +struct tx4939_vpc_reg { + struct tx4939_le_reg csr; + struct { + struct tx4939_le_reg ctrlA; + struct tx4939_le_reg ctrlB; + struct tx4939_le_reg idesptr; + struct tx4939_le_reg cdesptr; + } port[3]; + struct tx4939_le_reg buserr; +}; + +struct tx4939_vpc_desc { + __u32 src; + __u32 next; + __u32 ctrl1; + __u32 ctrl2; +}; + +/* + * IRC + */ +#define TX4939_IR_NONE 0 +#define TX4939_IR_DDR 1 +#define TX4939_IR_WTOERR 2 +#define TX4939_NUM_IR_INT 3 +#define TX4939_IR_INT(n) (3 + (n)) +#define TX4939_NUM_IR_ETH 2 +#define TX4939_IR_ETH(n) ((n) ? 43 : 6) +#define TX4939_IR_VIDEO 7 +#define TX4939_IR_CIR 8 +#define TX4939_NUM_IR_SIO 4 +#define TX4939_IR_SIO(n) ((n) ? 43 + (n) : 9) /* 9,44-46 */ +#define TX4939_NUM_IR_DMA 4 +#define TX4939_IR_DMA(ch, n) (((ch) ? 22 : 10) + (n)) /* 10-13,22-25 */ +#define TX4939_IR_IRC 14 +#define TX4939_IR_PDMAC 15 +#define TX4939_NUM_IR_TMR 6 +#define TX4939_IR_TMR(n) (((n) >= 3 ? 45 : 16) + (n)) /* 16-18,48-50 */ +#define TX4939_NUM_IR_ATA 2 +#define TX4939_IR_ATA(n) (19 + (n)) +#define TX4939_IR_ACLC 21 +#define TX4939_IR_CIPHER 26 +#define TX4939_IR_INTA 27 +#define TX4939_IR_INTB 28 +#define TX4939_IR_INTC 29 +#define TX4939_IR_INTD 30 +#define TX4939_IR_I2C 33 +#define TX4939_IR_SPI 34 +#define TX4939_IR_PCIC 35 +#define TX4939_IR_PCIC1 36 +#define TX4939_IR_PCIERR 37 +#define TX4939_IR_PCIPME 38 +#define TX4939_IR_NDFMC 39 +#define TX4939_IR_ACLCPME 40 +#define TX4939_IR_RTC 41 +#define TX4939_IR_RND 42 +#define TX4939_IR_I2S 47 +#define TX4939_NUM_IR 64 + +#define TX4939_IRC_INT 2 /* IP[2] in Status register */ + +/* + * CCFG + */ +/* CCFG : Chip Configuration */ +#define TX4939_CCFG_PCIBOOT 0x0000040000000000ULL +#define TX4939_CCFG_WDRST 0x0000020000000000ULL +#define TX4939_CCFG_WDREXEN 0x0000010000000000ULL +#define TX4939_CCFG_BCFG_MASK 0x000000ff00000000ULL +#define TX4939_CCFG_GTOT_MASK 0x06000000 +#define TX4939_CCFG_GTOT_4096 0x06000000 +#define TX4939_CCFG_GTOT_2048 0x04000000 +#define TX4939_CCFG_GTOT_1024 0x02000000 +#define TX4939_CCFG_GTOT_512 0x00000000 +#define TX4939_CCFG_TINTDIS 0x01000000 +#define TX4939_CCFG_PCI66 0x00800000 +#define TX4939_CCFG_PCIMODE 0x00400000 +#define TX4939_CCFG_SSCG 0x00100000 +#define TX4939_CCFG_MULCLK_MASK 0x000e0000 +#define TX4939_CCFG_MULCLK_8 (0x7 << 17) +#define TX4939_CCFG_MULCLK_9 (0x0 << 17) +#define TX4939_CCFG_MULCLK_10 (0x1 << 17) +#define TX4939_CCFG_MULCLK_11 (0x2 << 17) +#define TX4939_CCFG_MULCLK_12 (0x3 << 17) +#define TX4939_CCFG_MULCLK_13 (0x4 << 17) +#define TX4939_CCFG_MULCLK_14 (0x5 << 17) +#define TX4939_CCFG_MULCLK_15 (0x6 << 17) +#define TX4939_CCFG_BEOW 0x00010000 +#define TX4939_CCFG_WR 0x00008000 +#define TX4939_CCFG_TOE 0x00004000 +#define TX4939_CCFG_PCIARB 0x00002000 +#define TX4939_CCFG_YDIVMODE_MASK 0x00001c00 +#define TX4939_CCFG_YDIVMODE_2 (0x0 << 10) +#define TX4939_CCFG_YDIVMODE_3 (0x1 << 10) +#define TX4939_CCFG_YDIVMODE_5 (0x6 << 10) +#define TX4939_CCFG_YDIVMODE_6 (0x7 << 10) +#define TX4939_CCFG_PTSEL 0x00000200 +#define TX4939_CCFG_BESEL 0x00000100 +#define TX4939_CCFG_SYSSP_MASK 0x000000c0 +#define TX4939_CCFG_ACKSEL 0x00000020 +#define TX4939_CCFG_ROMW 0x00000010 +#define TX4939_CCFG_ENDIAN 0x00000004 +#define TX4939_CCFG_ARMODE 0x00000002 +#define TX4939_CCFG_ACEHOLD 0x00000001 + +/* PCFG : Pin Configuration */ +#define TX4939_PCFG_SIO2MODE_MASK 0xc000000000000000ULL +#define TX4939_PCFG_SIO2MODE_GPIO 0x8000000000000000ULL +#define TX4939_PCFG_SIO2MODE_SIO2 0x4000000000000000ULL +#define TX4939_PCFG_SIO2MODE_SIO0 0x0000000000000000ULL +#define TX4939_PCFG_SPIMODE 0x2000000000000000ULL +#define TX4939_PCFG_I2CMODE 0x1000000000000000ULL +#define TX4939_PCFG_I2SMODE_MASK 0x0c00000000000000ULL +#define TX4939_PCFG_I2SMODE_GPIO 0x0c00000000000000ULL +#define TX4939_PCFG_I2SMODE_I2S 0x0800000000000000ULL +#define TX4939_PCFG_I2SMODE_I2S_ALT 0x0400000000000000ULL +#define TX4939_PCFG_I2SMODE_ACLC 0x0000000000000000ULL +#define TX4939_PCFG_SIO3MODE 0x0200000000000000ULL +#define TX4939_PCFG_DMASEL3 0x0004000000000000ULL +#define TX4939_PCFG_DMASEL3_SIO0 0x0004000000000000ULL +#define TX4939_PCFG_DMASEL3_NDFC 0x0000000000000000ULL +#define TX4939_PCFG_VSSMODE 0x0000200000000000ULL +#define TX4939_PCFG_VPSMODE 0x0000100000000000ULL +#define TX4939_PCFG_ET1MODE 0x0000080000000000ULL +#define TX4939_PCFG_ET0MODE 0x0000040000000000ULL +#define TX4939_PCFG_ATA1MODE 0x0000020000000000ULL +#define TX4939_PCFG_ATA0MODE 0x0000010000000000ULL +#define TX4939_PCFG_BP_PLL 0x0000000100000000ULL + +#define TX4939_PCFG_SYSCLKEN 0x08000000 +#define TX4939_PCFG_PCICLKEN_ALL 0x000f0000 +#define TX4939_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) +#define TX4939_PCFG_SPEED1 0x00002000 +#define TX4939_PCFG_SPEED0 0x00001000 +#define TX4939_PCFG_ITMODE 0x00000300 +#define TX4939_PCFG_DMASEL_ALL (0x00000007 | TX4939_PCFG_DMASEL3) +#define TX4939_PCFG_DMASEL2 0x00000004 +#define TX4939_PCFG_DMASEL2_DRQ2 0x00000000 +#define TX4939_PCFG_DMASEL2_SIO0 0x00000004 +#define TX4939_PCFG_DMASEL1 0x00000002 +#define TX4939_PCFG_DMASEL1_DRQ1 0x00000000 +#define TX4939_PCFG_DMASEL0 0x00000001 +#define TX4939_PCFG_DMASEL0_DRQ0 0x00000000 + +/* CLKCTR : Clock Control */ +#define TX4939_CLKCTR_IOSCKD 0x8000000000000000ULL +#define TX4939_CLKCTR_SYSCKD 0x4000000000000000ULL +#define TX4939_CLKCTR_TM5CKD 0x2000000000000000ULL +#define TX4939_CLKCTR_TM4CKD 0x1000000000000000ULL +#define TX4939_CLKCTR_TM3CKD 0x0800000000000000ULL +#define TX4939_CLKCTR_CIRCKD 0x0400000000000000ULL +#define TX4939_CLKCTR_SIO3CKD 0x0200000000000000ULL +#define TX4939_CLKCTR_SIO2CKD 0x0100000000000000ULL +#define TX4939_CLKCTR_SIO1CKD 0x0080000000000000ULL +#define TX4939_CLKCTR_VPCCKD 0x0040000000000000ULL +#define TX4939_CLKCTR_EPCICKD 0x0020000000000000ULL +#define TX4939_CLKCTR_ETH1CKD 0x0008000000000000ULL +#define TX4939_CLKCTR_ATA1CKD 0x0004000000000000ULL +#define TX4939_CLKCTR_BROMCKD 0x0002000000000000ULL +#define TX4939_CLKCTR_NDCCKD 0x0001000000000000ULL +#define TX4939_CLKCTR_I2CCKD 0x0000800000000000ULL +#define TX4939_CLKCTR_ETH0CKD 0x0000400000000000ULL +#define TX4939_CLKCTR_SPICKD 0x0000200000000000ULL +#define TX4939_CLKCTR_SRAMCKD 0x0000100000000000ULL +#define TX4939_CLKCTR_PCI1CKD 0x0000080000000000ULL +#define TX4939_CLKCTR_DMA1CKD 0x0000040000000000ULL +#define TX4939_CLKCTR_ACLCKD 0x0000020000000000ULL +#define TX4939_CLKCTR_ATA0CKD 0x0000010000000000ULL +#define TX4939_CLKCTR_DMA0CKD 0x0000008000000000ULL +#define TX4939_CLKCTR_PCICCKD 0x0000004000000000ULL +#define TX4939_CLKCTR_I2SCKD 0x0000002000000000ULL +#define TX4939_CLKCTR_TM0CKD 0x0000001000000000ULL +#define TX4939_CLKCTR_TM1CKD 0x0000000800000000ULL +#define TX4939_CLKCTR_TM2CKD 0x0000000400000000ULL +#define TX4939_CLKCTR_SIO0CKD 0x0000000200000000ULL +#define TX4939_CLKCTR_CYPCKD 0x0000000100000000ULL +#define TX4939_CLKCTR_IOSRST 0x80000000 +#define TX4939_CLKCTR_SYSRST 0x40000000 +#define TX4939_CLKCTR_TM5RST 0x20000000 +#define TX4939_CLKCTR_TM4RST 0x10000000 +#define TX4939_CLKCTR_TM3RST 0x08000000 +#define TX4939_CLKCTR_CIRRST 0x04000000 +#define TX4939_CLKCTR_SIO3RST 0x02000000 +#define TX4939_CLKCTR_SIO2RST 0x01000000 +#define TX4939_CLKCTR_SIO1RST 0x00800000 +#define TX4939_CLKCTR_VPCRST 0x00400000 +#define TX4939_CLKCTR_EPCIRST 0x00200000 +#define TX4939_CLKCTR_ETH1RST 0x00080000 +#define TX4939_CLKCTR_ATA1RST 0x00040000 +#define TX4939_CLKCTR_BROMRST 0x00020000 +#define TX4939_CLKCTR_NDCRST 0x00010000 +#define TX4939_CLKCTR_I2CRST 0x00008000 +#define TX4939_CLKCTR_ETH0RST 0x00004000 +#define TX4939_CLKCTR_SPIRST 0x00002000 +#define TX4939_CLKCTR_SRAMRST 0x00001000 +#define TX4939_CLKCTR_PCI1RST 0x00000800 +#define TX4939_CLKCTR_DMA1RST 0x00000400 +#define TX4939_CLKCTR_ACLRST 0x00000200 +#define TX4939_CLKCTR_ATA0RST 0x00000100 +#define TX4939_CLKCTR_DMA0RST 0x00000080 +#define TX4939_CLKCTR_PCICRST 0x00000040 +#define TX4939_CLKCTR_I2SRST 0x00000020 +#define TX4939_CLKCTR_TM0RST 0x00000010 +#define TX4939_CLKCTR_TM1RST 0x00000008 +#define TX4939_CLKCTR_TM2RST 0x00000004 +#define TX4939_CLKCTR_SIO0RST 0x00000002 +#define TX4939_CLKCTR_CYPRST 0x00000001 + +/* + * RTC + */ +#define TX4939_RTCCTL_ALME 0x00000080 +#define TX4939_RTCCTL_ALMD 0x00000040 +#define TX4939_RTCCTL_BUSY 0x00000020 + +#define TX4939_RTCCTL_COMMAND 0x00000007 +#define TX4939_RTCCTL_COMMAND_NOP 0x00000000 +#define TX4939_RTCCTL_COMMAND_GETTIME 0x00000001 +#define TX4939_RTCCTL_COMMAND_SETTIME 0x00000002 +#define TX4939_RTCCTL_COMMAND_GETALARM 0x00000003 +#define TX4939_RTCCTL_COMMAND_SETALARM 0x00000004 + +#define TX4939_RTCTBC_PM 0x00000080 +#define TX4939_RTCTBC_COMP 0x0000007f + +#define TX4939_RTC_REG_RAMSIZE 0x00000100 +#define TX4939_RTC_REG_RWBSIZE 0x00000006 + +/* + * CRYPTO + */ +#define TX4939_CRYPTO_CSR_SAESO 0x08000000 +#define TX4939_CRYPTO_CSR_SAESI 0x04000000 +#define TX4939_CRYPTO_CSR_SDESO 0x02000000 +#define TX4939_CRYPTO_CSR_SDESI 0x01000000 +#define TX4939_CRYPTO_CSR_INDXBST_MASK 0x00700000 +#define TX4939_CRYPTO_CSR_INDXBST(n) ((n) << 20) +#define TX4939_CRYPTO_CSR_TOINT 0x00080000 +#define TX4939_CRYPTO_CSR_DCINT 0x00040000 +#define TX4939_CRYPTO_CSR_GBINT 0x00010000 +#define TX4939_CRYPTO_CSR_INDXAST_MASK 0x0000e000 +#define TX4939_CRYPTO_CSR_INDXAST(n) ((n) << 13) +#define TX4939_CRYPTO_CSR_CSWAP_MASK 0x00001800 +#define TX4939_CRYPTO_CSR_CSWAP_NONE 0x00000000 +#define TX4939_CRYPTO_CSR_CSWAP_IN 0x00000800 +#define TX4939_CRYPTO_CSR_CSWAP_OUT 0x00001000 +#define TX4939_CRYPTO_CSR_CSWAP_BOTH 0x00001800 +#define TX4939_CRYPTO_CSR_CDIV_MASK 0x00000600 +#define TX4939_CRYPTO_CSR_CDIV_DIV2 0x00000000 +#define TX4939_CRYPTO_CSR_CDIV_DIV1 0x00000200 +#define TX4939_CRYPTO_CSR_CDIV_DIV2ALT 0x00000400 +#define TX4939_CRYPTO_CSR_CDIV_DIV1ALT 0x00000600 +#define TX4939_CRYPTO_CSR_PDINT_MASK 0x000000c0 +#define TX4939_CRYPTO_CSR_PDINT_ALL 0x00000000 +#define TX4939_CRYPTO_CSR_PDINT_END 0x00000040 +#define TX4939_CRYPTO_CSR_PDINT_NEXT 0x00000080 +#define TX4939_CRYPTO_CSR_PDINT_NONE 0x000000c0 +#define TX4939_CRYPTO_CSR_GINTE 0x00000008 +#define TX4939_CRYPTO_CSR_RSTD 0x00000004 +#define TX4939_CRYPTO_CSR_RSTC 0x00000002 +#define TX4939_CRYPTO_CSR_ENCR 0x00000001 + +/* bits for tx4939_crypto_reg.cdr.gen.ctrl */ +#define TX4939_CRYPTO_CTX_ENGINE_MASK 0x00000003 +#define TX4939_CRYPTO_CTX_ENGINE_DES 0x00000000 +#define TX4939_CRYPTO_CTX_ENGINE_AES 0x00000001 +#define TX4939_CRYPTO_CTX_ENGINE_MD5 0x00000002 +#define TX4939_CRYPTO_CTX_ENGINE_SHA1 0x00000003 +#define TX4939_CRYPTO_CTX_TDMS 0x00000010 +#define TX4939_CRYPTO_CTX_CMS 0x00000020 +#define TX4939_CRYPTO_CTX_DMS 0x00000040 +#define TX4939_CRYPTO_CTX_UPDATE 0x00000080 + +/* bits for tx4939_crypto_desc.ctrl */ +#define TX4939_CRYPTO_DESC_OB_CNT_MASK 0xffe00000 +#define TX4939_CRYPTO_DESC_OB_CNT(cnt) ((cnt) << 21) +#define TX4939_CRYPTO_DESC_IB_CNT_MASK 0x001ffc00 +#define TX4939_CRYPTO_DESC_IB_CNT(cnt) ((cnt) << 10) +#define TX4939_CRYPTO_DESC_START 0x00000200 +#define TX4939_CRYPTO_DESC_END 0x00000100 +#define TX4939_CRYPTO_DESC_XOR 0x00000010 +#define TX4939_CRYPTO_DESC_LAST 0x00000008 +#define TX4939_CRYPTO_DESC_ERR_MASK 0x00000006 +#define TX4939_CRYPTO_DESC_ERR_NONE 0x00000000 +#define TX4939_CRYPTO_DESC_ERR_TOUT 0x00000002 +#define TX4939_CRYPTO_DESC_ERR_DIGEST 0x00000004 +#define TX4939_CRYPTO_DESC_OWN 0x00000001 + +/* bits for tx4939_crypto_desc.index */ +#define TX4939_CRYPTO_DESC_HASH_IDX_MASK 0x00000070 +#define TX4939_CRYPTO_DESC_HASH_IDX(idx) ((idx) << 4) +#define TX4939_CRYPTO_DESC_ENCRYPT_IDX_MASK 0x00000007 +#define TX4939_CRYPTO_DESC_ENCRYPT_IDX(idx) ((idx) << 0) + +#define TX4939_CRYPTO_NR_SET 6 + +#define TX4939_CRYPTO_RCSR_INTE 0x00000008 +#define TX4939_CRYPTO_RCSR_RST 0x00000004 +#define TX4939_CRYPTO_RCSR_FIN 0x00000002 +#define TX4939_CRYPTO_RCSR_ST 0x00000001 + +/* + * VPC + */ +#define TX4939_VPC_CSR_GBINT 0x00010000 +#define TX4939_VPC_CSR_SWAPO 0x00000020 +#define TX4939_VPC_CSR_SWAPI 0x00000010 +#define TX4939_VPC_CSR_GINTE 0x00000008 +#define TX4939_VPC_CSR_RSTD 0x00000004 +#define TX4939_VPC_CSR_RSTVPC 0x00000002 + +#define TX4939_VPC_CTRLA_VDPSN 0x00000200 +#define TX4939_VPC_CTRLA_PBUSY 0x00000100 +#define TX4939_VPC_CTRLA_DCINT 0x00000080 +#define TX4939_VPC_CTRLA_UOINT 0x00000040 +#define TX4939_VPC_CTRLA_PDINT_MASK 0x00000030 +#define TX4939_VPC_CTRLA_PDINT_ALL 0x00000000 +#define TX4939_VPC_CTRLA_PDINT_NEXT 0x00000010 +#define TX4939_VPC_CTRLA_PDINT_NONE 0x00000030 +#define TX4939_VPC_CTRLA_VDVLDP 0x00000008 +#define TX4939_VPC_CTRLA_VDMODE 0x00000004 +#define TX4939_VPC_CTRLA_VDFOR 0x00000002 +#define TX4939_VPC_CTRLA_ENVPC 0x00000001 + +/* bits for tx4939_vpc_desc.ctrl1 */ +#define TX4939_VPC_DESC_CTRL1_ERR_MASK 0x00000006 +#define TX4939_VPC_DESC_CTRL1_OWN 0x00000001 + +#define tx4939_ddrcptr ((struct tx4939_ddrc_reg __iomem *)TX4939_DDRC_REG) +#define tx4939_ebuscptr tx4938_ebuscptr +#define tx4939_ircptr \ + ((struct tx4939_irc_reg __iomem *)TX4939_IRC_REG) +#define tx4939_pcicptr tx4938_pcicptr +#define tx4939_pcic1ptr tx4938_pcic1ptr +#define tx4939_ccfgptr \ + ((struct tx4939_ccfg_reg __iomem *)TX4939_CCFG_REG) +#define tx4939_sramcptr tx4938_sramcptr +#define tx4939_rtcptr \ + ((struct tx4939_rtc_reg __iomem *)TX4939_RTC_REG) +#define tx4939_cryptoptr \ + ((struct tx4939_crypto_reg __iomem *)TX4939_CRYPTO_REG) +#define tx4939_vpcptr ((struct tx4939_vpc_reg __iomem *)TX4939_VPC_REG) + +#define TX4939_REV_MAJ_MIN() \ + ((__u32)__raw_readq(&tx4939_ccfgptr->crir) & 0x00ff) +#define TX4939_REV_PCODE() \ + ((__u32)__raw_readq(&tx4939_ccfgptr->crir) >> 16) +#define TX4939_CCFG_BCFG() \ + ((__u32)((__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_BCFG_MASK) \ + >> 32)) + +#define tx4939_ccfg_clear(bits) tx4938_ccfg_clear(bits) +#define tx4939_ccfg_set(bits) tx4938_ccfg_set(bits) +#define tx4939_ccfg_change(change, new) tx4938_ccfg_change(change, new) + +#define TX4939_EBUSC_CR(ch) TX4927_EBUSC_CR(ch) +#define TX4939_EBUSC_BA(ch) TX4927_EBUSC_BA(ch) +#define TX4939_EBUSC_SIZE(ch) TX4927_EBUSC_SIZE(ch) +#define TX4939_EBUSC_WIDTH(ch) \ + (16 >> ((__u32)(TX4939_EBUSC_CR(ch) >> 20) & 0x1)) + +/* SCLK0 = MSTCLK * 429/19 * 16/245 / 2 (14.745MHz for MST 20MHz) */ +#define TX4939_SCLK0(mst) \ + ((((mst) + 245/2) / 245UL * 429 * 16 + 19) / 19 / 2) + +void tx4939_wdt_init(void); +void tx4939_add_memory_regions(void); +void tx4939_setup(void); +void tx4939_time_init(unsigned int tmrnr); +void tx4939_sio_init(unsigned int sclk, unsigned int cts_mask); +void tx4939_spi_init(int busid); +void tx4939_ethaddr_init(unsigned char *addr0, unsigned char *addr1); +int tx4939_report_pciclk(void); +void tx4939_report_pci1clk(void); +struct pci_dev; +int tx4939_pcic1_map_irq(const struct pci_dev *dev, u8 slot); +int tx4939_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +void tx4939_setup_pcierr_irq(void); +void tx4939_irq_init(void); +int tx4939_irq(void); +void tx4939_mtd_init(int ch); +void tx4939_ata_init(void); + +#endif /* __ASM_TXX9_TX4939_H */ diff --git a/arch/mips/include/asm/txx9irq.h b/arch/mips/include/asm/txx9irq.h new file mode 100644 index 000000000000..5620879be37f --- /dev/null +++ b/arch/mips/include/asm/txx9irq.h @@ -0,0 +1,34 @@ +/* + * include/asm-mips/txx9irq.h + * TX39/TX49 interrupt controller definitions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9IRQ_H +#define __ASM_TXX9IRQ_H + +#include <irq.h> + +#ifdef CONFIG_IRQ_CPU +#define TXX9_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) +#else +#ifdef CONFIG_I8259 +#define TXX9_IRQ_BASE (I8259A_IRQ_BASE + 16) +#else +#define TXX9_IRQ_BASE 0 +#endif +#endif + +#ifdef CONFIG_CPU_TX39XX +#define TXx9_MAX_IR 16 +#else +#define TXx9_MAX_IR 32 +#endif + +void txx9_irq_init(unsigned long baseaddr); +int txx9_irq(void); +int txx9_irq_set_pri(int irc_irq, int new_pri); + +#endif /* __ASM_TXX9IRQ_H */ diff --git a/arch/mips/include/asm/txx9pio.h b/arch/mips/include/asm/txx9pio.h new file mode 100644 index 000000000000..3d6fa9f8d513 --- /dev/null +++ b/arch/mips/include/asm/txx9pio.h @@ -0,0 +1,29 @@ +/* + * include/asm-mips/txx9pio.h + * TX39/TX49 PIO controller definitions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9PIO_H +#define __ASM_TXX9PIO_H + +#include <linux/types.h> + +struct txx9_pio_reg { + __u32 dout; + __u32 din; + __u32 dir; + __u32 od; + __u32 flag[2]; + __u32 pol; + __u32 intc; + __u32 maskcpu; + __u32 maskext; +}; + +int txx9_gpio_init(unsigned long baseaddr, + unsigned int base, unsigned int num); + +#endif /* __ASM_TXX9PIO_H */ diff --git a/arch/mips/include/asm/txx9tmr.h b/arch/mips/include/asm/txx9tmr.h new file mode 100644 index 000000000000..67f70a8f09bd --- /dev/null +++ b/arch/mips/include/asm/txx9tmr.h @@ -0,0 +1,67 @@ +/* + * include/asm-mips/txx9tmr.h + * TX39/TX49 timer controller definitions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9TMR_H +#define __ASM_TXX9TMR_H + +#include <linux/types.h> + +struct txx9_tmr_reg { + u32 tcr; + u32 tisr; + u32 cpra; + u32 cprb; + u32 itmr; + u32 unused0[3]; + u32 ccdr; + u32 unused1[3]; + u32 pgmr; + u32 unused2[3]; + u32 wtmr; + u32 unused3[43]; + u32 trr; +}; + +/* TMTCR : Timer Control */ +#define TXx9_TMTCR_TCE 0x00000080 +#define TXx9_TMTCR_CCDE 0x00000040 +#define TXx9_TMTCR_CRE 0x00000020 +#define TXx9_TMTCR_ECES 0x00000008 +#define TXx9_TMTCR_CCS 0x00000004 +#define TXx9_TMTCR_TMODE_MASK 0x00000003 +#define TXx9_TMTCR_TMODE_ITVL 0x00000000 +#define TXx9_TMTCR_TMODE_PGEN 0x00000001 +#define TXx9_TMTCR_TMODE_WDOG 0x00000002 + +/* TMTISR : Timer Int. Status */ +#define TXx9_TMTISR_TPIBS 0x00000004 +#define TXx9_TMTISR_TPIAS 0x00000002 +#define TXx9_TMTISR_TIIS 0x00000001 + +/* TMITMR : Interval Timer Mode */ +#define TXx9_TMITMR_TIIE 0x00008000 +#define TXx9_TMITMR_TZCE 0x00000001 + +/* TMWTMR : Watchdog Timer Mode */ +#define TXx9_TMWTMR_TWIE 0x00008000 +#define TXx9_TMWTMR_WDIS 0x00000080 +#define TXx9_TMWTMR_TWC 0x00000001 + +void txx9_clocksource_init(unsigned long baseaddr, + unsigned int imbusclk); +void txx9_clockevent_init(unsigned long baseaddr, int irq, + unsigned int imbusclk); +void txx9_tmr_init(unsigned long baseaddr); + +#ifdef CONFIG_CPU_TX39XX +#define TXX9_TIMER_BITS 24 +#else +#define TXX9_TIMER_BITS 32 +#endif + +#endif /* __ASM_TXX9TMR_H */ diff --git a/arch/mips/include/asm/types.h b/arch/mips/include/asm/types.h new file mode 100644 index 000000000000..bcbb8d675af5 --- /dev/null +++ b/arch/mips/include/asm/types.h @@ -0,0 +1,54 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_TYPES_H +#define _ASM_TYPES_H + +#if _MIPS_SZLONG == 64 +# include <asm-generic/int-l64.h> +#else +# include <asm-generic/int-ll64.h> +#endif + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG _MIPS_SZLONG + +#ifndef __ASSEMBLY__ + +#if (defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) \ + || defined(CONFIG_64BIT) +typedef u64 dma_addr_t; +#else +typedef u32 dma_addr_t; +#endif +typedef u64 dma64_addr_t; + +/* + * Don't use phys_t. You've been warned. + */ +#ifdef CONFIG_64BIT_PHYS_ADDR +typedef unsigned long long phys_t; +#else +typedef unsigned long phys_t; +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_TYPES_H */ diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h new file mode 100644 index 000000000000..09ff5bb17445 --- /dev/null +++ b/arch/mips/include/asm/uaccess.h @@ -0,0 +1,1114 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1997, 1998, 1999, 2000, 03, 04 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2007 Maciej W. Rozycki + */ +#ifndef _ASM_UACCESS_H +#define _ASM_UACCESS_H + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/thread_info.h> + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + */ +#ifdef CONFIG_32BIT + +#define __UA_LIMIT 0x80000000UL + +#define __UA_ADDR ".word" +#define __UA_LA "la" +#define __UA_ADDU "addu" +#define __UA_t0 "$8" +#define __UA_t1 "$9" + +#endif /* CONFIG_32BIT */ + +#ifdef CONFIG_64BIT + +#define __UA_LIMIT (- TASK_SIZE) + +#define __UA_ADDR ".dword" +#define __UA_LA "dla" +#define __UA_ADDU "daddu" +#define __UA_t0 "$12" +#define __UA_t1 "$13" + +#endif /* CONFIG_64BIT */ + +/* + * USER_DS is a bitmask that has the bits set that may not be set in a valid + * userspace address. Note that we limit 32-bit userspace to 0x7fff8000 but + * the arithmetic we're doing only works if the limit is a power of two, so + * we use 0x80000000 here on 32-bit kernels. If a process passes an invalid + * address in this range it's the process's problem, not ours :-) + */ + +#define KERNEL_DS ((mm_segment_t) { 0UL }) +#define USER_DS ((mm_segment_t) { __UA_LIMIT }) + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define get_ds() (KERNEL_DS) +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) + +#define segment_eq(a, b) ((a).seg == (b).seg) + + +/* + * Is a address valid? This does a straighforward calculation rather + * than tests. + * + * Address valid if: + * - "addr" doesn't have any high-bits set + * - AND "size" doesn't have any high-bits set + * - AND "addr+size" doesn't have any high-bits set + * - OR we are in kernel mode. + * + * __ua_size() is a trick to avoid runtime checking of positive constant + * sizes; for those we already know at compile time that the size is ok. + */ +#define __ua_size(size) \ + ((__builtin_constant_p(size) && (signed long) (size) > 0) ? 0 : (size)) + +/* + * access_ok: - Checks if a user space pointer is valid + * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that + * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe + * to write to a block, it is always safe to read from it. + * @addr: User space pointer to start of block to check + * @size: Size of block to check + * + * Context: User context only. This function may sleep. + * + * Checks if a pointer to a block of memory in user space is valid. + * + * Returns true (nonzero) if the memory block may be valid, false (zero) + * if it is definitely invalid. + * + * Note that, depending on architecture, this function probably just + * checks that the pointer is in the user space range - after calling + * this function, memory access functions may still return -EFAULT. + */ + +#define __access_mask get_fs().seg + +#define __access_ok(addr, size, mask) \ + (((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0) + +#define access_ok(type, addr, size) \ + likely(__access_ok((unsigned long)(addr), (size), __access_mask)) + +/* + * put_user: - Write a simple value into user space. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Returns zero on success, or -EFAULT on error. + */ +#define put_user(x,ptr) \ + __put_user_check((x), (ptr), sizeof(*(ptr))) + +/* + * get_user: - Get a simple variable from user space. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define get_user(x,ptr) \ + __get_user_check((x), (ptr), sizeof(*(ptr))) + +/* + * __put_user: - Write a simple value into user space, with less checking. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + */ +#define __put_user(x,ptr) \ + __put_user_nocheck((x), (ptr), sizeof(*(ptr))) + +/* + * __get_user: - Get a simple variable from user space, with less checking. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define __get_user(x,ptr) \ + __get_user_nocheck((x), (ptr), sizeof(*(ptr))) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct __user *)(x)) + +/* + * Yuck. We need two variants, one for 64bit operation and one + * for 32 bit mode and old iron. + */ +#ifdef CONFIG_32BIT +#define __GET_USER_DW(val, ptr) __get_user_asm_ll32(val, ptr) +#endif +#ifdef CONFIG_64BIT +#define __GET_USER_DW(val, ptr) __get_user_asm(val, "ld", ptr) +#endif + +extern void __get_user_unknown(void); + +#define __get_user_common(val, size, ptr) \ +do { \ + switch (size) { \ + case 1: __get_user_asm(val, "lb", ptr); break; \ + case 2: __get_user_asm(val, "lh", ptr); break; \ + case 4: __get_user_asm(val, "lw", ptr); break; \ + case 8: __GET_USER_DW(val, ptr); break; \ + default: __get_user_unknown(); break; \ + } \ +} while (0) + +#define __get_user_nocheck(x, ptr, size) \ +({ \ + int __gu_err; \ + \ + __get_user_common((x), size, ptr); \ + __gu_err; \ +}) + +#define __get_user_check(x, ptr, size) \ +({ \ + int __gu_err = -EFAULT; \ + const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \ + \ + if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \ + __get_user_common((x), size, __gu_ptr); \ + \ + __gu_err; \ +}) + +#define __get_user_asm(val, insn, addr) \ +{ \ + long __gu_tmp; \ + \ + __asm__ __volatile__( \ + "1: " insn " %1, %3 \n" \ + "2: \n" \ + " .section .fixup,\"ax\" \n" \ + "3: li %0, %4 \n" \ + " j 2b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " "__UA_ADDR "\t1b, 3b \n" \ + " .previous \n" \ + : "=r" (__gu_err), "=r" (__gu_tmp) \ + : "0" (0), "o" (__m(addr)), "i" (-EFAULT)); \ + \ + (val) = (__typeof__(*(addr))) __gu_tmp; \ +} + +/* + * Get a long long 64 using 32 bit registers. + */ +#define __get_user_asm_ll32(val, addr) \ +{ \ + union { \ + unsigned long long l; \ + __typeof__(*(addr)) t; \ + } __gu_tmp; \ + \ + __asm__ __volatile__( \ + "1: lw %1, (%3) \n" \ + "2: lw %D1, 4(%3) \n" \ + "3: .section .fixup,\"ax\" \n" \ + "4: li %0, %4 \n" \ + " move %1, $0 \n" \ + " move %D1, $0 \n" \ + " j 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " " __UA_ADDR " 1b, 4b \n" \ + " " __UA_ADDR " 2b, 4b \n" \ + " .previous \n" \ + : "=r" (__gu_err), "=&r" (__gu_tmp.l) \ + : "0" (0), "r" (addr), "i" (-EFAULT)); \ + \ + (val) = __gu_tmp.t; \ +} + +/* + * Yuck. We need two variants, one for 64bit operation and one + * for 32 bit mode and old iron. + */ +#ifdef CONFIG_32BIT +#define __PUT_USER_DW(ptr) __put_user_asm_ll32(ptr) +#endif +#ifdef CONFIG_64BIT +#define __PUT_USER_DW(ptr) __put_user_asm("sd", ptr) +#endif + +#define __put_user_nocheck(x, ptr, size) \ +({ \ + __typeof__(*(ptr)) __pu_val; \ + int __pu_err = 0; \ + \ + __pu_val = (x); \ + switch (size) { \ + case 1: __put_user_asm("sb", ptr); break; \ + case 2: __put_user_asm("sh", ptr); break; \ + case 4: __put_user_asm("sw", ptr); break; \ + case 8: __PUT_USER_DW(ptr); break; \ + default: __put_user_unknown(); break; \ + } \ + __pu_err; \ +}) + +#define __put_user_check(x, ptr, size) \ +({ \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = (x); \ + int __pu_err = -EFAULT; \ + \ + if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \ + switch (size) { \ + case 1: __put_user_asm("sb", __pu_addr); break; \ + case 2: __put_user_asm("sh", __pu_addr); break; \ + case 4: __put_user_asm("sw", __pu_addr); break; \ + case 8: __PUT_USER_DW(__pu_addr); break; \ + default: __put_user_unknown(); break; \ + } \ + } \ + __pu_err; \ +}) + +#define __put_user_asm(insn, ptr) \ +{ \ + __asm__ __volatile__( \ + "1: " insn " %z2, %3 # __put_user_asm\n" \ + "2: \n" \ + " .section .fixup,\"ax\" \n" \ + "3: li %0, %4 \n" \ + " j 2b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " " __UA_ADDR " 1b, 3b \n" \ + " .previous \n" \ + : "=r" (__pu_err) \ + : "0" (0), "Jr" (__pu_val), "o" (__m(ptr)), \ + "i" (-EFAULT)); \ +} + +#define __put_user_asm_ll32(ptr) \ +{ \ + __asm__ __volatile__( \ + "1: sw %2, (%3) # __put_user_asm_ll32 \n" \ + "2: sw %D2, 4(%3) \n" \ + "3: \n" \ + " .section .fixup,\"ax\" \n" \ + "4: li %0, %4 \n" \ + " j 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " " __UA_ADDR " 1b, 4b \n" \ + " " __UA_ADDR " 2b, 4b \n" \ + " .previous" \ + : "=r" (__pu_err) \ + : "0" (0), "r" (__pu_val), "r" (ptr), \ + "i" (-EFAULT)); \ +} + +extern void __put_user_unknown(void); + +/* + * put_user_unaligned: - Write a simple value into user space. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Returns zero on success, or -EFAULT on error. + */ +#define put_user_unaligned(x,ptr) \ + __put_user_unaligned_check((x),(ptr),sizeof(*(ptr))) + +/* + * get_user_unaligned: - Get a simple variable from user space. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define get_user_unaligned(x,ptr) \ + __get_user_unaligned_check((x),(ptr),sizeof(*(ptr))) + +/* + * __put_user_unaligned: - Write a simple value into user space, with less checking. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + */ +#define __put_user_unaligned(x,ptr) \ + __put_user_unaligned_nocheck((x),(ptr),sizeof(*(ptr))) + +/* + * __get_user_unaligned: - Get a simple variable from user space, with less checking. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define __get_user_unaligned(x,ptr) \ + __get_user__unalignednocheck((x),(ptr),sizeof(*(ptr))) + +/* + * Yuck. We need two variants, one for 64bit operation and one + * for 32 bit mode and old iron. + */ +#ifdef CONFIG_32BIT +#define __GET_USER_UNALIGNED_DW(val, ptr) \ + __get_user_unaligned_asm_ll32(val, ptr) +#endif +#ifdef CONFIG_64BIT +#define __GET_USER_UNALIGNED_DW(val, ptr) \ + __get_user_unaligned_asm(val, "uld", ptr) +#endif + +extern void __get_user_unaligned_unknown(void); + +#define __get_user_unaligned_common(val, size, ptr) \ +do { \ + switch (size) { \ + case 1: __get_user_asm(val, "lb", ptr); break; \ + case 2: __get_user_unaligned_asm(val, "ulh", ptr); break; \ + case 4: __get_user_unaligned_asm(val, "ulw", ptr); break; \ + case 8: __GET_USER_UNALIGNED_DW(val, ptr); break; \ + default: __get_user_unaligned_unknown(); break; \ + } \ +} while (0) + +#define __get_user_unaligned_nocheck(x,ptr,size) \ +({ \ + int __gu_err; \ + \ + __get_user_unaligned_common((x), size, ptr); \ + __gu_err; \ +}) + +#define __get_user_unaligned_check(x,ptr,size) \ +({ \ + int __gu_err = -EFAULT; \ + const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \ + \ + if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \ + __get_user_unaligned_common((x), size, __gu_ptr); \ + \ + __gu_err; \ +}) + +#define __get_user_unaligned_asm(val, insn, addr) \ +{ \ + long __gu_tmp; \ + \ + __asm__ __volatile__( \ + "1: " insn " %1, %3 \n" \ + "2: \n" \ + " .section .fixup,\"ax\" \n" \ + "3: li %0, %4 \n" \ + " j 2b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " "__UA_ADDR "\t1b, 3b \n" \ + " "__UA_ADDR "\t1b + 4, 3b \n" \ + " .previous \n" \ + : "=r" (__gu_err), "=r" (__gu_tmp) \ + : "0" (0), "o" (__m(addr)), "i" (-EFAULT)); \ + \ + (val) = (__typeof__(*(addr))) __gu_tmp; \ +} + +/* + * Get a long long 64 using 32 bit registers. + */ +#define __get_user_unaligned_asm_ll32(val, addr) \ +{ \ + unsigned long long __gu_tmp; \ + \ + __asm__ __volatile__( \ + "1: ulw %1, (%3) \n" \ + "2: ulw %D1, 4(%3) \n" \ + " move %0, $0 \n" \ + "3: .section .fixup,\"ax\" \n" \ + "4: li %0, %4 \n" \ + " move %1, $0 \n" \ + " move %D1, $0 \n" \ + " j 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " " __UA_ADDR " 1b, 4b \n" \ + " " __UA_ADDR " 1b + 4, 4b \n" \ + " " __UA_ADDR " 2b, 4b \n" \ + " " __UA_ADDR " 2b + 4, 4b \n" \ + " .previous \n" \ + : "=r" (__gu_err), "=&r" (__gu_tmp) \ + : "0" (0), "r" (addr), "i" (-EFAULT)); \ + (val) = (__typeof__(*(addr))) __gu_tmp; \ +} + +/* + * Yuck. We need two variants, one for 64bit operation and one + * for 32 bit mode and old iron. + */ +#ifdef CONFIG_32BIT +#define __PUT_USER_UNALIGNED_DW(ptr) __put_user_unaligned_asm_ll32(ptr) +#endif +#ifdef CONFIG_64BIT +#define __PUT_USER_UNALIGNED_DW(ptr) __put_user_unaligned_asm("usd", ptr) +#endif + +#define __put_user_unaligned_nocheck(x,ptr,size) \ +({ \ + __typeof__(*(ptr)) __pu_val; \ + int __pu_err = 0; \ + \ + __pu_val = (x); \ + switch (size) { \ + case 1: __put_user_asm("sb", ptr); break; \ + case 2: __put_user_unaligned_asm("ush", ptr); break; \ + case 4: __put_user_unaligned_asm("usw", ptr); break; \ + case 8: __PUT_USER_UNALIGNED_DW(ptr); break; \ + default: __put_user_unaligned_unknown(); break; \ + } \ + __pu_err; \ +}) + +#define __put_user_unaligned_check(x,ptr,size) \ +({ \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = (x); \ + int __pu_err = -EFAULT; \ + \ + if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \ + switch (size) { \ + case 1: __put_user_asm("sb", __pu_addr); break; \ + case 2: __put_user_unaligned_asm("ush", __pu_addr); break; \ + case 4: __put_user_unaligned_asm("usw", __pu_addr); break; \ + case 8: __PUT_USER_UNALGINED_DW(__pu_addr); break; \ + default: __put_user_unaligned_unknown(); break; \ + } \ + } \ + __pu_err; \ +}) + +#define __put_user_unaligned_asm(insn, ptr) \ +{ \ + __asm__ __volatile__( \ + "1: " insn " %z2, %3 # __put_user_unaligned_asm\n" \ + "2: \n" \ + " .section .fixup,\"ax\" \n" \ + "3: li %0, %4 \n" \ + " j 2b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " " __UA_ADDR " 1b, 3b \n" \ + " .previous \n" \ + : "=r" (__pu_err) \ + : "0" (0), "Jr" (__pu_val), "o" (__m(ptr)), \ + "i" (-EFAULT)); \ +} + +#define __put_user_unaligned_asm_ll32(ptr) \ +{ \ + __asm__ __volatile__( \ + "1: sw %2, (%3) # __put_user_unaligned_asm_ll32 \n" \ + "2: sw %D2, 4(%3) \n" \ + "3: \n" \ + " .section .fixup,\"ax\" \n" \ + "4: li %0, %4 \n" \ + " j 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " " __UA_ADDR " 1b, 4b \n" \ + " " __UA_ADDR " 1b + 4, 4b \n" \ + " " __UA_ADDR " 2b, 4b \n" \ + " " __UA_ADDR " 2b + 4, 4b \n" \ + " .previous" \ + : "=r" (__pu_err) \ + : "0" (0), "r" (__pu_val), "r" (ptr), \ + "i" (-EFAULT)); \ +} + +extern void __put_user_unaligned_unknown(void); + +/* + * We're generating jump to subroutines which will be outside the range of + * jump instructions + */ +#ifdef MODULE +#define __MODULE_JAL(destination) \ + ".set\tnoat\n\t" \ + __UA_LA "\t$1, " #destination "\n\t" \ + "jalr\t$1\n\t" \ + ".set\tat\n\t" +#else +#define __MODULE_JAL(destination) \ + "jal\t" #destination "\n\t" +#endif + +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS +#define DADDI_SCRATCH "$0" +#else +#define DADDI_SCRATCH "$3" +#endif + +extern size_t __copy_user(void *__to, const void *__from, size_t __n); + +#define __invoke_copy_to_user(to, from, n) \ +({ \ + register void __user *__cu_to_r __asm__("$4"); \ + register const void *__cu_from_r __asm__("$5"); \ + register long __cu_len_r __asm__("$6"); \ + \ + __cu_to_r = (to); \ + __cu_from_r = (from); \ + __cu_len_r = (n); \ + __asm__ __volatile__( \ + __MODULE_JAL(__copy_user) \ + : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \ + : \ + : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \ + DADDI_SCRATCH, "memory"); \ + __cu_len_r; \ +}) + +/* + * __copy_to_user: - Copy a block of data into user space, with less checking. + * @to: Destination address, in user space. + * @from: Source address, in kernel space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from kernel space to user space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + */ +#define __copy_to_user(to, from, n) \ +({ \ + void __user *__cu_to; \ + const void *__cu_from; \ + long __cu_len; \ + \ + might_sleep(); \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \ + __cu_len; \ +}) + +extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); + +#define __copy_to_user_inatomic(to, from, n) \ +({ \ + void __user *__cu_to; \ + const void *__cu_from; \ + long __cu_len; \ + \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \ + __cu_len; \ +}) + +#define __copy_from_user_inatomic(to, from, n) \ +({ \ + void *__cu_to; \ + const void __user *__cu_from; \ + long __cu_len; \ + \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + __cu_len = __invoke_copy_from_user_inatomic(__cu_to, __cu_from, \ + __cu_len); \ + __cu_len; \ +}) + +/* + * copy_to_user: - Copy a block of data into user space. + * @to: Destination address, in user space. + * @from: Source address, in kernel space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from kernel space to user space. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + */ +#define copy_to_user(to, from, n) \ +({ \ + void __user *__cu_to; \ + const void *__cu_from; \ + long __cu_len; \ + \ + might_sleep(); \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) \ + __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, \ + __cu_len); \ + __cu_len; \ +}) + +#define __invoke_copy_from_user(to, from, n) \ +({ \ + register void *__cu_to_r __asm__("$4"); \ + register const void __user *__cu_from_r __asm__("$5"); \ + register long __cu_len_r __asm__("$6"); \ + \ + __cu_to_r = (to); \ + __cu_from_r = (from); \ + __cu_len_r = (n); \ + __asm__ __volatile__( \ + ".set\tnoreorder\n\t" \ + __MODULE_JAL(__copy_user) \ + ".set\tnoat\n\t" \ + __UA_ADDU "\t$1, %1, %2\n\t" \ + ".set\tat\n\t" \ + ".set\treorder" \ + : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \ + : \ + : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \ + DADDI_SCRATCH, "memory"); \ + __cu_len_r; \ +}) + +#define __invoke_copy_from_user_inatomic(to, from, n) \ +({ \ + register void *__cu_to_r __asm__("$4"); \ + register const void __user *__cu_from_r __asm__("$5"); \ + register long __cu_len_r __asm__("$6"); \ + \ + __cu_to_r = (to); \ + __cu_from_r = (from); \ + __cu_len_r = (n); \ + __asm__ __volatile__( \ + ".set\tnoreorder\n\t" \ + __MODULE_JAL(__copy_user_inatomic) \ + ".set\tnoat\n\t" \ + __UA_ADDU "\t$1, %1, %2\n\t" \ + ".set\tat\n\t" \ + ".set\treorder" \ + : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \ + : \ + : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \ + DADDI_SCRATCH, "memory"); \ + __cu_len_r; \ +}) + +/* + * __copy_from_user: - Copy a block of data from user space, with less checking. + * @to: Destination address, in kernel space. + * @from: Source address, in user space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from user space to kernel space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + * + * If some data could not be copied, this function will pad the copied + * data to the requested size using zero bytes. + */ +#define __copy_from_user(to, from, n) \ +({ \ + void *__cu_to; \ + const void __user *__cu_from; \ + long __cu_len; \ + \ + might_sleep(); \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ + __cu_len); \ + __cu_len; \ +}) + +/* + * copy_from_user: - Copy a block of data from user space. + * @to: Destination address, in kernel space. + * @from: Source address, in user space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from user space to kernel space. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + * + * If some data could not be copied, this function will pad the copied + * data to the requested size using zero bytes. + */ +#define copy_from_user(to, from, n) \ +({ \ + void *__cu_to; \ + const void __user *__cu_from; \ + long __cu_len; \ + \ + might_sleep(); \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + if (access_ok(VERIFY_READ, __cu_from, __cu_len)) \ + __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ + __cu_len); \ + __cu_len; \ +}) + +#define __copy_in_user(to, from, n) __copy_from_user(to, from, n) + +#define copy_in_user(to, from, n) \ +({ \ + void __user *__cu_to; \ + const void __user *__cu_from; \ + long __cu_len; \ + \ + might_sleep(); \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) && \ + access_ok(VERIFY_WRITE, __cu_to, __cu_len))) \ + __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ + __cu_len); \ + __cu_len; \ +}) + +/* + * __clear_user: - Zero a block of memory in user space, with less checking. + * @to: Destination address, in user space. + * @n: Number of bytes to zero. + * + * Zero a block of memory in user space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be cleared. + * On success, this will be zero. + */ +static inline __kernel_size_t +__clear_user(void __user *addr, __kernel_size_t size) +{ + __kernel_size_t res; + + might_sleep(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + "move\t$5, $0\n\t" + "move\t$6, %2\n\t" + __MODULE_JAL(__bzero) + "move\t%0, $6" + : "=r" (res) + : "r" (addr), "r" (size) + : "$4", "$5", "$6", __UA_t0, __UA_t1, "$31"); + + return res; +} + +#define clear_user(addr,n) \ +({ \ + void __user * __cl_addr = (addr); \ + unsigned long __cl_size = (n); \ + if (__cl_size && access_ok(VERIFY_WRITE, \ + ((unsigned long)(__cl_addr)), __cl_size)) \ + __cl_size = __clear_user(__cl_addr, __cl_size); \ + __cl_size; \ +}) + +/* + * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking. + * @dst: Destination address, in kernel space. This buffer must be at + * least @count bytes long. + * @src: Source address, in user space. + * @count: Maximum number of bytes to copy, including the trailing NUL. + * + * Copies a NUL-terminated string from userspace to kernel space. + * Caller must check the specified block with access_ok() before calling + * this function. + * + * On success, returns the length of the string (not including the trailing + * NUL). + * + * If access to userspace fails, returns -EFAULT (some data may have been + * copied). + * + * If @count is smaller than the length of the string, copies @count bytes + * and returns @count. + */ +static inline long +__strncpy_from_user(char *__to, const char __user *__from, long __len) +{ + long res; + + might_sleep(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + "move\t$5, %2\n\t" + "move\t$6, %3\n\t" + __MODULE_JAL(__strncpy_from_user_nocheck_asm) + "move\t%0, $2" + : "=r" (res) + : "r" (__to), "r" (__from), "r" (__len) + : "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory"); + + return res; +} + +/* + * strncpy_from_user: - Copy a NUL terminated string from userspace. + * @dst: Destination address, in kernel space. This buffer must be at + * least @count bytes long. + * @src: Source address, in user space. + * @count: Maximum number of bytes to copy, including the trailing NUL. + * + * Copies a NUL-terminated string from userspace to kernel space. + * + * On success, returns the length of the string (not including the trailing + * NUL). + * + * If access to userspace fails, returns -EFAULT (some data may have been + * copied). + * + * If @count is smaller than the length of the string, copies @count bytes + * and returns @count. + */ +static inline long +strncpy_from_user(char *__to, const char __user *__from, long __len) +{ + long res; + + might_sleep(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + "move\t$5, %2\n\t" + "move\t$6, %3\n\t" + __MODULE_JAL(__strncpy_from_user_asm) + "move\t%0, $2" + : "=r" (res) + : "r" (__to), "r" (__from), "r" (__len) + : "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory"); + + return res; +} + +/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ +static inline long __strlen_user(const char __user *s) +{ + long res; + + might_sleep(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + __MODULE_JAL(__strlen_user_nocheck_asm) + "move\t%0, $2" + : "=r" (res) + : "r" (s) + : "$2", "$4", __UA_t0, "$31"); + + return res; +} + +/* + * strlen_user: - Get the size of a string in user space. + * @str: The string to measure. + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * + * If there is a limit on the length of a valid string, you may wish to + * consider using strnlen_user() instead. + */ +static inline long strlen_user(const char __user *s) +{ + long res; + + might_sleep(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + __MODULE_JAL(__strlen_user_asm) + "move\t%0, $2" + : "=r" (res) + : "r" (s) + : "$2", "$4", __UA_t0, "$31"); + + return res; +} + +/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ +static inline long __strnlen_user(const char __user *s, long n) +{ + long res; + + might_sleep(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + "move\t$5, %2\n\t" + __MODULE_JAL(__strnlen_user_nocheck_asm) + "move\t%0, $2" + : "=r" (res) + : "r" (s), "r" (n) + : "$2", "$4", "$5", __UA_t0, "$31"); + + return res; +} + +/* + * strlen_user: - Get the size of a string in user space. + * @str: The string to measure. + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * + * If there is a limit on the length of a valid string, you may wish to + * consider using strnlen_user() instead. + */ +static inline long strnlen_user(const char __user *s, long n) +{ + long res; + + might_sleep(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + "move\t$5, %2\n\t" + __MODULE_JAL(__strnlen_user_asm) + "move\t%0, $2" + : "=r" (res) + : "r" (s), "r" (n) + : "$2", "$4", "$5", __UA_t0, "$31"); + + return res; +} + +struct exception_table_entry +{ + unsigned long insn; + unsigned long nextinsn; +}; + +extern int fixup_exception(struct pt_regs *regs); + +#endif /* _ASM_UACCESS_H */ diff --git a/arch/mips/include/asm/ucontext.h b/arch/mips/include/asm/ucontext.h new file mode 100644 index 000000000000..8a4b20e88b81 --- /dev/null +++ b/arch/mips/include/asm/ucontext.h @@ -0,0 +1,21 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Low level exception handling + * + * Copyright (C) 1998, 1999 by Ralf Baechle + */ +#ifndef _ASM_UCONTEXT_H +#define _ASM_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* _ASM_UCONTEXT_H */ diff --git a/arch/mips/include/asm/unaligned.h b/arch/mips/include/asm/unaligned.h new file mode 100644 index 000000000000..792404948571 --- /dev/null +++ b/arch/mips/include/asm/unaligned.h @@ -0,0 +1,28 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef _ASM_MIPS_UNALIGNED_H +#define _ASM_MIPS_UNALIGNED_H + +#include <linux/compiler.h> +#if defined(__MIPSEB__) +# include <linux/unaligned/be_struct.h> +# include <linux/unaligned/le_byteshift.h> +# include <linux/unaligned/generic.h> +# define get_unaligned __get_unaligned_be +# define put_unaligned __put_unaligned_be +#elif defined(__MIPSEL__) +# include <linux/unaligned/le_struct.h> +# include <linux/unaligned/be_byteshift.h> +# include <linux/unaligned/generic.h> +# define get_unaligned __get_unaligned_le +# define put_unaligned __put_unaligned_le +#else +# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???" +#endif + +#endif /* _ASM_MIPS_UNALIGNED_H */ diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h new file mode 100644 index 000000000000..a73e1531e151 --- /dev/null +++ b/arch/mips/include/asm/unistd.h @@ -0,0 +1,1037 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 97, 98, 99, 2000 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * + * Changed system calls macros _syscall5 - _syscall7 to push args 5 to 7 onto + * the stack. Robin Farine for ACN S.A, Copyright (C) 1996 by ACN S.A + */ +#ifndef _ASM_UNISTD_H +#define _ASM_UNISTD_H + +#include <asm/sgidefs.h> + +#if _MIPS_SIM == _MIPS_SIM_ABI32 + +/* + * Linux o32 style syscalls are in the range from 4000 to 4999. + */ +#define __NR_Linux 4000 +#define __NR_syscall (__NR_Linux + 0) +#define __NR_exit (__NR_Linux + 1) +#define __NR_fork (__NR_Linux + 2) +#define __NR_read (__NR_Linux + 3) +#define __NR_write (__NR_Linux + 4) +#define __NR_open (__NR_Linux + 5) +#define __NR_close (__NR_Linux + 6) +#define __NR_waitpid (__NR_Linux + 7) +#define __NR_creat (__NR_Linux + 8) +#define __NR_link (__NR_Linux + 9) +#define __NR_unlink (__NR_Linux + 10) +#define __NR_execve (__NR_Linux + 11) +#define __NR_chdir (__NR_Linux + 12) +#define __NR_time (__NR_Linux + 13) +#define __NR_mknod (__NR_Linux + 14) +#define __NR_chmod (__NR_Linux + 15) +#define __NR_lchown (__NR_Linux + 16) +#define __NR_break (__NR_Linux + 17) +#define __NR_unused18 (__NR_Linux + 18) +#define __NR_lseek (__NR_Linux + 19) +#define __NR_getpid (__NR_Linux + 20) +#define __NR_mount (__NR_Linux + 21) +#define __NR_umount (__NR_Linux + 22) +#define __NR_setuid (__NR_Linux + 23) +#define __NR_getuid (__NR_Linux + 24) +#define __NR_stime (__NR_Linux + 25) +#define __NR_ptrace (__NR_Linux + 26) +#define __NR_alarm (__NR_Linux + 27) +#define __NR_unused28 (__NR_Linux + 28) +#define __NR_pause (__NR_Linux + 29) +#define __NR_utime (__NR_Linux + 30) +#define __NR_stty (__NR_Linux + 31) +#define __NR_gtty (__NR_Linux + 32) +#define __NR_access (__NR_Linux + 33) +#define __NR_nice (__NR_Linux + 34) +#define __NR_ftime (__NR_Linux + 35) +#define __NR_sync (__NR_Linux + 36) +#define __NR_kill (__NR_Linux + 37) +#define __NR_rename (__NR_Linux + 38) +#define __NR_mkdir (__NR_Linux + 39) +#define __NR_rmdir (__NR_Linux + 40) +#define __NR_dup (__NR_Linux + 41) +#define __NR_pipe (__NR_Linux + 42) +#define __NR_times (__NR_Linux + 43) +#define __NR_prof (__NR_Linux + 44) +#define __NR_brk (__NR_Linux + 45) +#define __NR_setgid (__NR_Linux + 46) +#define __NR_getgid (__NR_Linux + 47) +#define __NR_signal (__NR_Linux + 48) +#define __NR_geteuid (__NR_Linux + 49) +#define __NR_getegid (__NR_Linux + 50) +#define __NR_acct (__NR_Linux + 51) +#define __NR_umount2 (__NR_Linux + 52) +#define __NR_lock (__NR_Linux + 53) +#define __NR_ioctl (__NR_Linux + 54) +#define __NR_fcntl (__NR_Linux + 55) +#define __NR_mpx (__NR_Linux + 56) +#define __NR_setpgid (__NR_Linux + 57) +#define __NR_ulimit (__NR_Linux + 58) +#define __NR_unused59 (__NR_Linux + 59) +#define __NR_umask (__NR_Linux + 60) +#define __NR_chroot (__NR_Linux + 61) +#define __NR_ustat (__NR_Linux + 62) +#define __NR_dup2 (__NR_Linux + 63) +#define __NR_getppid (__NR_Linux + 64) +#define __NR_getpgrp (__NR_Linux + 65) +#define __NR_setsid (__NR_Linux + 66) +#define __NR_sigaction (__NR_Linux + 67) +#define __NR_sgetmask (__NR_Linux + 68) +#define __NR_ssetmask (__NR_Linux + 69) +#define __NR_setreuid (__NR_Linux + 70) +#define __NR_setregid (__NR_Linux + 71) +#define __NR_sigsuspend (__NR_Linux + 72) +#define __NR_sigpending (__NR_Linux + 73) +#define __NR_sethostname (__NR_Linux + 74) +#define __NR_setrlimit (__NR_Linux + 75) +#define __NR_getrlimit (__NR_Linux + 76) +#define __NR_getrusage (__NR_Linux + 77) +#define __NR_gettimeofday (__NR_Linux + 78) +#define __NR_settimeofday (__NR_Linux + 79) +#define __NR_getgroups (__NR_Linux + 80) +#define __NR_setgroups (__NR_Linux + 81) +#define __NR_reserved82 (__NR_Linux + 82) +#define __NR_symlink (__NR_Linux + 83) +#define __NR_unused84 (__NR_Linux + 84) +#define __NR_readlink (__NR_Linux + 85) +#define __NR_uselib (__NR_Linux + 86) +#define __NR_swapon (__NR_Linux + 87) +#define __NR_reboot (__NR_Linux + 88) +#define __NR_readdir (__NR_Linux + 89) +#define __NR_mmap (__NR_Linux + 90) +#define __NR_munmap (__NR_Linux + 91) +#define __NR_truncate (__NR_Linux + 92) +#define __NR_ftruncate (__NR_Linux + 93) +#define __NR_fchmod (__NR_Linux + 94) +#define __NR_fchown (__NR_Linux + 95) +#define __NR_getpriority (__NR_Linux + 96) +#define __NR_setpriority (__NR_Linux + 97) +#define __NR_profil (__NR_Linux + 98) +#define __NR_statfs (__NR_Linux + 99) +#define __NR_fstatfs (__NR_Linux + 100) +#define __NR_ioperm (__NR_Linux + 101) +#define __NR_socketcall (__NR_Linux + 102) +#define __NR_syslog (__NR_Linux + 103) +#define __NR_setitimer (__NR_Linux + 104) +#define __NR_getitimer (__NR_Linux + 105) +#define __NR_stat (__NR_Linux + 106) +#define __NR_lstat (__NR_Linux + 107) +#define __NR_fstat (__NR_Linux + 108) +#define __NR_unused109 (__NR_Linux + 109) +#define __NR_iopl (__NR_Linux + 110) +#define __NR_vhangup (__NR_Linux + 111) +#define __NR_idle (__NR_Linux + 112) +#define __NR_vm86 (__NR_Linux + 113) +#define __NR_wait4 (__NR_Linux + 114) +#define __NR_swapoff (__NR_Linux + 115) +#define __NR_sysinfo (__NR_Linux + 116) +#define __NR_ipc (__NR_Linux + 117) +#define __NR_fsync (__NR_Linux + 118) +#define __NR_sigreturn (__NR_Linux + 119) +#define __NR_clone (__NR_Linux + 120) +#define __NR_setdomainname (__NR_Linux + 121) +#define __NR_uname (__NR_Linux + 122) +#define __NR_modify_ldt (__NR_Linux + 123) +#define __NR_adjtimex (__NR_Linux + 124) +#define __NR_mprotect (__NR_Linux + 125) +#define __NR_sigprocmask (__NR_Linux + 126) +#define __NR_create_module (__NR_Linux + 127) +#define __NR_init_module (__NR_Linux + 128) +#define __NR_delete_module (__NR_Linux + 129) +#define __NR_get_kernel_syms (__NR_Linux + 130) +#define __NR_quotactl (__NR_Linux + 131) +#define __NR_getpgid (__NR_Linux + 132) +#define __NR_fchdir (__NR_Linux + 133) +#define __NR_bdflush (__NR_Linux + 134) +#define __NR_sysfs (__NR_Linux + 135) +#define __NR_personality (__NR_Linux + 136) +#define __NR_afs_syscall (__NR_Linux + 137) /* Syscall for Andrew File System */ +#define __NR_setfsuid (__NR_Linux + 138) +#define __NR_setfsgid (__NR_Linux + 139) +#define __NR__llseek (__NR_Linux + 140) +#define __NR_getdents (__NR_Linux + 141) +#define __NR__newselect (__NR_Linux + 142) +#define __NR_flock (__NR_Linux + 143) +#define __NR_msync (__NR_Linux + 144) +#define __NR_readv (__NR_Linux + 145) +#define __NR_writev (__NR_Linux + 146) +#define __NR_cacheflush (__NR_Linux + 147) +#define __NR_cachectl (__NR_Linux + 148) +#define __NR_sysmips (__NR_Linux + 149) +#define __NR_unused150 (__NR_Linux + 150) +#define __NR_getsid (__NR_Linux + 151) +#define __NR_fdatasync (__NR_Linux + 152) +#define __NR__sysctl (__NR_Linux + 153) +#define __NR_mlock (__NR_Linux + 154) +#define __NR_munlock (__NR_Linux + 155) +#define __NR_mlockall (__NR_Linux + 156) +#define __NR_munlockall (__NR_Linux + 157) +#define __NR_sched_setparam (__NR_Linux + 158) +#define __NR_sched_getparam (__NR_Linux + 159) +#define __NR_sched_setscheduler (__NR_Linux + 160) +#define __NR_sched_getscheduler (__NR_Linux + 161) +#define __NR_sched_yield (__NR_Linux + 162) +#define __NR_sched_get_priority_max (__NR_Linux + 163) +#define __NR_sched_get_priority_min (__NR_Linux + 164) +#define __NR_sched_rr_get_interval (__NR_Linux + 165) +#define __NR_nanosleep (__NR_Linux + 166) +#define __NR_mremap (__NR_Linux + 167) +#define __NR_accept (__NR_Linux + 168) +#define __NR_bind (__NR_Linux + 169) +#define __NR_connect (__NR_Linux + 170) +#define __NR_getpeername (__NR_Linux + 171) +#define __NR_getsockname (__NR_Linux + 172) +#define __NR_getsockopt (__NR_Linux + 173) +#define __NR_listen (__NR_Linux + 174) +#define __NR_recv (__NR_Linux + 175) +#define __NR_recvfrom (__NR_Linux + 176) +#define __NR_recvmsg (__NR_Linux + 177) +#define __NR_send (__NR_Linux + 178) +#define __NR_sendmsg (__NR_Linux + 179) +#define __NR_sendto (__NR_Linux + 180) +#define __NR_setsockopt (__NR_Linux + 181) +#define __NR_shutdown (__NR_Linux + 182) +#define __NR_socket (__NR_Linux + 183) +#define __NR_socketpair (__NR_Linux + 184) +#define __NR_setresuid (__NR_Linux + 185) +#define __NR_getresuid (__NR_Linux + 186) +#define __NR_query_module (__NR_Linux + 187) +#define __NR_poll (__NR_Linux + 188) +#define __NR_nfsservctl (__NR_Linux + 189) +#define __NR_setresgid (__NR_Linux + 190) +#define __NR_getresgid (__NR_Linux + 191) +#define __NR_prctl (__NR_Linux + 192) +#define __NR_rt_sigreturn (__NR_Linux + 193) +#define __NR_rt_sigaction (__NR_Linux + 194) +#define __NR_rt_sigprocmask (__NR_Linux + 195) +#define __NR_rt_sigpending (__NR_Linux + 196) +#define __NR_rt_sigtimedwait (__NR_Linux + 197) +#define __NR_rt_sigqueueinfo (__NR_Linux + 198) +#define __NR_rt_sigsuspend (__NR_Linux + 199) +#define __NR_pread64 (__NR_Linux + 200) +#define __NR_pwrite64 (__NR_Linux + 201) +#define __NR_chown (__NR_Linux + 202) +#define __NR_getcwd (__NR_Linux + 203) +#define __NR_capget (__NR_Linux + 204) +#define __NR_capset (__NR_Linux + 205) +#define __NR_sigaltstack (__NR_Linux + 206) +#define __NR_sendfile (__NR_Linux + 207) +#define __NR_getpmsg (__NR_Linux + 208) +#define __NR_putpmsg (__NR_Linux + 209) +#define __NR_mmap2 (__NR_Linux + 210) +#define __NR_truncate64 (__NR_Linux + 211) +#define __NR_ftruncate64 (__NR_Linux + 212) +#define __NR_stat64 (__NR_Linux + 213) +#define __NR_lstat64 (__NR_Linux + 214) +#define __NR_fstat64 (__NR_Linux + 215) +#define __NR_pivot_root (__NR_Linux + 216) +#define __NR_mincore (__NR_Linux + 217) +#define __NR_madvise (__NR_Linux + 218) +#define __NR_getdents64 (__NR_Linux + 219) +#define __NR_fcntl64 (__NR_Linux + 220) +#define __NR_reserved221 (__NR_Linux + 221) +#define __NR_gettid (__NR_Linux + 222) +#define __NR_readahead (__NR_Linux + 223) +#define __NR_setxattr (__NR_Linux + 224) +#define __NR_lsetxattr (__NR_Linux + 225) +#define __NR_fsetxattr (__NR_Linux + 226) +#define __NR_getxattr (__NR_Linux + 227) +#define __NR_lgetxattr (__NR_Linux + 228) +#define __NR_fgetxattr (__NR_Linux + 229) +#define __NR_listxattr (__NR_Linux + 230) +#define __NR_llistxattr (__NR_Linux + 231) +#define __NR_flistxattr (__NR_Linux + 232) +#define __NR_removexattr (__NR_Linux + 233) +#define __NR_lremovexattr (__NR_Linux + 234) +#define __NR_fremovexattr (__NR_Linux + 235) +#define __NR_tkill (__NR_Linux + 236) +#define __NR_sendfile64 (__NR_Linux + 237) +#define __NR_futex (__NR_Linux + 238) +#define __NR_sched_setaffinity (__NR_Linux + 239) +#define __NR_sched_getaffinity (__NR_Linux + 240) +#define __NR_io_setup (__NR_Linux + 241) +#define __NR_io_destroy (__NR_Linux + 242) +#define __NR_io_getevents (__NR_Linux + 243) +#define __NR_io_submit (__NR_Linux + 244) +#define __NR_io_cancel (__NR_Linux + 245) +#define __NR_exit_group (__NR_Linux + 246) +#define __NR_lookup_dcookie (__NR_Linux + 247) +#define __NR_epoll_create (__NR_Linux + 248) +#define __NR_epoll_ctl (__NR_Linux + 249) +#define __NR_epoll_wait (__NR_Linux + 250) +#define __NR_remap_file_pages (__NR_Linux + 251) +#define __NR_set_tid_address (__NR_Linux + 252) +#define __NR_restart_syscall (__NR_Linux + 253) +#define __NR_fadvise64 (__NR_Linux + 254) +#define __NR_statfs64 (__NR_Linux + 255) +#define __NR_fstatfs64 (__NR_Linux + 256) +#define __NR_timer_create (__NR_Linux + 257) +#define __NR_timer_settime (__NR_Linux + 258) +#define __NR_timer_gettime (__NR_Linux + 259) +#define __NR_timer_getoverrun (__NR_Linux + 260) +#define __NR_timer_delete (__NR_Linux + 261) +#define __NR_clock_settime (__NR_Linux + 262) +#define __NR_clock_gettime (__NR_Linux + 263) +#define __NR_clock_getres (__NR_Linux + 264) +#define __NR_clock_nanosleep (__NR_Linux + 265) +#define __NR_tgkill (__NR_Linux + 266) +#define __NR_utimes (__NR_Linux + 267) +#define __NR_mbind (__NR_Linux + 268) +#define __NR_get_mempolicy (__NR_Linux + 269) +#define __NR_set_mempolicy (__NR_Linux + 270) +#define __NR_mq_open (__NR_Linux + 271) +#define __NR_mq_unlink (__NR_Linux + 272) +#define __NR_mq_timedsend (__NR_Linux + 273) +#define __NR_mq_timedreceive (__NR_Linux + 274) +#define __NR_mq_notify (__NR_Linux + 275) +#define __NR_mq_getsetattr (__NR_Linux + 276) +#define __NR_vserver (__NR_Linux + 277) +#define __NR_waitid (__NR_Linux + 278) +/* #define __NR_sys_setaltroot (__NR_Linux + 279) */ +#define __NR_add_key (__NR_Linux + 280) +#define __NR_request_key (__NR_Linux + 281) +#define __NR_keyctl (__NR_Linux + 282) +#define __NR_set_thread_area (__NR_Linux + 283) +#define __NR_inotify_init (__NR_Linux + 284) +#define __NR_inotify_add_watch (__NR_Linux + 285) +#define __NR_inotify_rm_watch (__NR_Linux + 286) +#define __NR_migrate_pages (__NR_Linux + 287) +#define __NR_openat (__NR_Linux + 288) +#define __NR_mkdirat (__NR_Linux + 289) +#define __NR_mknodat (__NR_Linux + 290) +#define __NR_fchownat (__NR_Linux + 291) +#define __NR_futimesat (__NR_Linux + 292) +#define __NR_fstatat64 (__NR_Linux + 293) +#define __NR_unlinkat (__NR_Linux + 294) +#define __NR_renameat (__NR_Linux + 295) +#define __NR_linkat (__NR_Linux + 296) +#define __NR_symlinkat (__NR_Linux + 297) +#define __NR_readlinkat (__NR_Linux + 298) +#define __NR_fchmodat (__NR_Linux + 299) +#define __NR_faccessat (__NR_Linux + 300) +#define __NR_pselect6 (__NR_Linux + 301) +#define __NR_ppoll (__NR_Linux + 302) +#define __NR_unshare (__NR_Linux + 303) +#define __NR_splice (__NR_Linux + 304) +#define __NR_sync_file_range (__NR_Linux + 305) +#define __NR_tee (__NR_Linux + 306) +#define __NR_vmsplice (__NR_Linux + 307) +#define __NR_move_pages (__NR_Linux + 308) +#define __NR_set_robust_list (__NR_Linux + 309) +#define __NR_get_robust_list (__NR_Linux + 310) +#define __NR_kexec_load (__NR_Linux + 311) +#define __NR_getcpu (__NR_Linux + 312) +#define __NR_epoll_pwait (__NR_Linux + 313) +#define __NR_ioprio_set (__NR_Linux + 314) +#define __NR_ioprio_get (__NR_Linux + 315) +#define __NR_utimensat (__NR_Linux + 316) +#define __NR_signalfd (__NR_Linux + 317) +#define __NR_timerfd (__NR_Linux + 318) +#define __NR_eventfd (__NR_Linux + 319) +#define __NR_fallocate (__NR_Linux + 320) +#define __NR_timerfd_create (__NR_Linux + 321) +#define __NR_timerfd_gettime (__NR_Linux + 322) +#define __NR_timerfd_settime (__NR_Linux + 323) +#define __NR_signalfd4 (__NR_Linux + 324) +#define __NR_eventfd2 (__NR_Linux + 325) +#define __NR_epoll_create1 (__NR_Linux + 326) +#define __NR_dup3 (__NR_Linux + 327) +#define __NR_pipe2 (__NR_Linux + 328) +#define __NR_inotify_init1 (__NR_Linux + 329) + +/* + * Offset of the last Linux o32 flavoured syscall + */ +#define __NR_Linux_syscalls 329 + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ + +#define __NR_O32_Linux 4000 +#define __NR_O32_Linux_syscalls 329 + +#if _MIPS_SIM == _MIPS_SIM_ABI64 + +/* + * Linux 64-bit syscalls are in the range from 5000 to 5999. + */ +#define __NR_Linux 5000 +#define __NR_read (__NR_Linux + 0) +#define __NR_write (__NR_Linux + 1) +#define __NR_open (__NR_Linux + 2) +#define __NR_close (__NR_Linux + 3) +#define __NR_stat (__NR_Linux + 4) +#define __NR_fstat (__NR_Linux + 5) +#define __NR_lstat (__NR_Linux + 6) +#define __NR_poll (__NR_Linux + 7) +#define __NR_lseek (__NR_Linux + 8) +#define __NR_mmap (__NR_Linux + 9) +#define __NR_mprotect (__NR_Linux + 10) +#define __NR_munmap (__NR_Linux + 11) +#define __NR_brk (__NR_Linux + 12) +#define __NR_rt_sigaction (__NR_Linux + 13) +#define __NR_rt_sigprocmask (__NR_Linux + 14) +#define __NR_ioctl (__NR_Linux + 15) +#define __NR_pread64 (__NR_Linux + 16) +#define __NR_pwrite64 (__NR_Linux + 17) +#define __NR_readv (__NR_Linux + 18) +#define __NR_writev (__NR_Linux + 19) +#define __NR_access (__NR_Linux + 20) +#define __NR_pipe (__NR_Linux + 21) +#define __NR__newselect (__NR_Linux + 22) +#define __NR_sched_yield (__NR_Linux + 23) +#define __NR_mremap (__NR_Linux + 24) +#define __NR_msync (__NR_Linux + 25) +#define __NR_mincore (__NR_Linux + 26) +#define __NR_madvise (__NR_Linux + 27) +#define __NR_shmget (__NR_Linux + 28) +#define __NR_shmat (__NR_Linux + 29) +#define __NR_shmctl (__NR_Linux + 30) +#define __NR_dup (__NR_Linux + 31) +#define __NR_dup2 (__NR_Linux + 32) +#define __NR_pause (__NR_Linux + 33) +#define __NR_nanosleep (__NR_Linux + 34) +#define __NR_getitimer (__NR_Linux + 35) +#define __NR_setitimer (__NR_Linux + 36) +#define __NR_alarm (__NR_Linux + 37) +#define __NR_getpid (__NR_Linux + 38) +#define __NR_sendfile (__NR_Linux + 39) +#define __NR_socket (__NR_Linux + 40) +#define __NR_connect (__NR_Linux + 41) +#define __NR_accept (__NR_Linux + 42) +#define __NR_sendto (__NR_Linux + 43) +#define __NR_recvfrom (__NR_Linux + 44) +#define __NR_sendmsg (__NR_Linux + 45) +#define __NR_recvmsg (__NR_Linux + 46) +#define __NR_shutdown (__NR_Linux + 47) +#define __NR_bind (__NR_Linux + 48) +#define __NR_listen (__NR_Linux + 49) +#define __NR_getsockname (__NR_Linux + 50) +#define __NR_getpeername (__NR_Linux + 51) +#define __NR_socketpair (__NR_Linux + 52) +#define __NR_setsockopt (__NR_Linux + 53) +#define __NR_getsockopt (__NR_Linux + 54) +#define __NR_clone (__NR_Linux + 55) +#define __NR_fork (__NR_Linux + 56) +#define __NR_execve (__NR_Linux + 57) +#define __NR_exit (__NR_Linux + 58) +#define __NR_wait4 (__NR_Linux + 59) +#define __NR_kill (__NR_Linux + 60) +#define __NR_uname (__NR_Linux + 61) +#define __NR_semget (__NR_Linux + 62) +#define __NR_semop (__NR_Linux + 63) +#define __NR_semctl (__NR_Linux + 64) +#define __NR_shmdt (__NR_Linux + 65) +#define __NR_msgget (__NR_Linux + 66) +#define __NR_msgsnd (__NR_Linux + 67) +#define __NR_msgrcv (__NR_Linux + 68) +#define __NR_msgctl (__NR_Linux + 69) +#define __NR_fcntl (__NR_Linux + 70) +#define __NR_flock (__NR_Linux + 71) +#define __NR_fsync (__NR_Linux + 72) +#define __NR_fdatasync (__NR_Linux + 73) +#define __NR_truncate (__NR_Linux + 74) +#define __NR_ftruncate (__NR_Linux + 75) +#define __NR_getdents (__NR_Linux + 76) +#define __NR_getcwd (__NR_Linux + 77) +#define __NR_chdir (__NR_Linux + 78) +#define __NR_fchdir (__NR_Linux + 79) +#define __NR_rename (__NR_Linux + 80) +#define __NR_mkdir (__NR_Linux + 81) +#define __NR_rmdir (__NR_Linux + 82) +#define __NR_creat (__NR_Linux + 83) +#define __NR_link (__NR_Linux + 84) +#define __NR_unlink (__NR_Linux + 85) +#define __NR_symlink (__NR_Linux + 86) +#define __NR_readlink (__NR_Linux + 87) +#define __NR_chmod (__NR_Linux + 88) +#define __NR_fchmod (__NR_Linux + 89) +#define __NR_chown (__NR_Linux + 90) +#define __NR_fchown (__NR_Linux + 91) +#define __NR_lchown (__NR_Linux + 92) +#define __NR_umask (__NR_Linux + 93) +#define __NR_gettimeofday (__NR_Linux + 94) +#define __NR_getrlimit (__NR_Linux + 95) +#define __NR_getrusage (__NR_Linux + 96) +#define __NR_sysinfo (__NR_Linux + 97) +#define __NR_times (__NR_Linux + 98) +#define __NR_ptrace (__NR_Linux + 99) +#define __NR_getuid (__NR_Linux + 100) +#define __NR_syslog (__NR_Linux + 101) +#define __NR_getgid (__NR_Linux + 102) +#define __NR_setuid (__NR_Linux + 103) +#define __NR_setgid (__NR_Linux + 104) +#define __NR_geteuid (__NR_Linux + 105) +#define __NR_getegid (__NR_Linux + 106) +#define __NR_setpgid (__NR_Linux + 107) +#define __NR_getppid (__NR_Linux + 108) +#define __NR_getpgrp (__NR_Linux + 109) +#define __NR_setsid (__NR_Linux + 110) +#define __NR_setreuid (__NR_Linux + 111) +#define __NR_setregid (__NR_Linux + 112) +#define __NR_getgroups (__NR_Linux + 113) +#define __NR_setgroups (__NR_Linux + 114) +#define __NR_setresuid (__NR_Linux + 115) +#define __NR_getresuid (__NR_Linux + 116) +#define __NR_setresgid (__NR_Linux + 117) +#define __NR_getresgid (__NR_Linux + 118) +#define __NR_getpgid (__NR_Linux + 119) +#define __NR_setfsuid (__NR_Linux + 120) +#define __NR_setfsgid (__NR_Linux + 121) +#define __NR_getsid (__NR_Linux + 122) +#define __NR_capget (__NR_Linux + 123) +#define __NR_capset (__NR_Linux + 124) +#define __NR_rt_sigpending (__NR_Linux + 125) +#define __NR_rt_sigtimedwait (__NR_Linux + 126) +#define __NR_rt_sigqueueinfo (__NR_Linux + 127) +#define __NR_rt_sigsuspend (__NR_Linux + 128) +#define __NR_sigaltstack (__NR_Linux + 129) +#define __NR_utime (__NR_Linux + 130) +#define __NR_mknod (__NR_Linux + 131) +#define __NR_personality (__NR_Linux + 132) +#define __NR_ustat (__NR_Linux + 133) +#define __NR_statfs (__NR_Linux + 134) +#define __NR_fstatfs (__NR_Linux + 135) +#define __NR_sysfs (__NR_Linux + 136) +#define __NR_getpriority (__NR_Linux + 137) +#define __NR_setpriority (__NR_Linux + 138) +#define __NR_sched_setparam (__NR_Linux + 139) +#define __NR_sched_getparam (__NR_Linux + 140) +#define __NR_sched_setscheduler (__NR_Linux + 141) +#define __NR_sched_getscheduler (__NR_Linux + 142) +#define __NR_sched_get_priority_max (__NR_Linux + 143) +#define __NR_sched_get_priority_min (__NR_Linux + 144) +#define __NR_sched_rr_get_interval (__NR_Linux + 145) +#define __NR_mlock (__NR_Linux + 146) +#define __NR_munlock (__NR_Linux + 147) +#define __NR_mlockall (__NR_Linux + 148) +#define __NR_munlockall (__NR_Linux + 149) +#define __NR_vhangup (__NR_Linux + 150) +#define __NR_pivot_root (__NR_Linux + 151) +#define __NR__sysctl (__NR_Linux + 152) +#define __NR_prctl (__NR_Linux + 153) +#define __NR_adjtimex (__NR_Linux + 154) +#define __NR_setrlimit (__NR_Linux + 155) +#define __NR_chroot (__NR_Linux + 156) +#define __NR_sync (__NR_Linux + 157) +#define __NR_acct (__NR_Linux + 158) +#define __NR_settimeofday (__NR_Linux + 159) +#define __NR_mount (__NR_Linux + 160) +#define __NR_umount2 (__NR_Linux + 161) +#define __NR_swapon (__NR_Linux + 162) +#define __NR_swapoff (__NR_Linux + 163) +#define __NR_reboot (__NR_Linux + 164) +#define __NR_sethostname (__NR_Linux + 165) +#define __NR_setdomainname (__NR_Linux + 166) +#define __NR_create_module (__NR_Linux + 167) +#define __NR_init_module (__NR_Linux + 168) +#define __NR_delete_module (__NR_Linux + 169) +#define __NR_get_kernel_syms (__NR_Linux + 170) +#define __NR_query_module (__NR_Linux + 171) +#define __NR_quotactl (__NR_Linux + 172) +#define __NR_nfsservctl (__NR_Linux + 173) +#define __NR_getpmsg (__NR_Linux + 174) +#define __NR_putpmsg (__NR_Linux + 175) +#define __NR_afs_syscall (__NR_Linux + 176) +#define __NR_reserved177 (__NR_Linux + 177) +#define __NR_gettid (__NR_Linux + 178) +#define __NR_readahead (__NR_Linux + 179) +#define __NR_setxattr (__NR_Linux + 180) +#define __NR_lsetxattr (__NR_Linux + 181) +#define __NR_fsetxattr (__NR_Linux + 182) +#define __NR_getxattr (__NR_Linux + 183) +#define __NR_lgetxattr (__NR_Linux + 184) +#define __NR_fgetxattr (__NR_Linux + 185) +#define __NR_listxattr (__NR_Linux + 186) +#define __NR_llistxattr (__NR_Linux + 187) +#define __NR_flistxattr (__NR_Linux + 188) +#define __NR_removexattr (__NR_Linux + 189) +#define __NR_lremovexattr (__NR_Linux + 190) +#define __NR_fremovexattr (__NR_Linux + 191) +#define __NR_tkill (__NR_Linux + 192) +#define __NR_reserved193 (__NR_Linux + 193) +#define __NR_futex (__NR_Linux + 194) +#define __NR_sched_setaffinity (__NR_Linux + 195) +#define __NR_sched_getaffinity (__NR_Linux + 196) +#define __NR_cacheflush (__NR_Linux + 197) +#define __NR_cachectl (__NR_Linux + 198) +#define __NR_sysmips (__NR_Linux + 199) +#define __NR_io_setup (__NR_Linux + 200) +#define __NR_io_destroy (__NR_Linux + 201) +#define __NR_io_getevents (__NR_Linux + 202) +#define __NR_io_submit (__NR_Linux + 203) +#define __NR_io_cancel (__NR_Linux + 204) +#define __NR_exit_group (__NR_Linux + 205) +#define __NR_lookup_dcookie (__NR_Linux + 206) +#define __NR_epoll_create (__NR_Linux + 207) +#define __NR_epoll_ctl (__NR_Linux + 208) +#define __NR_epoll_wait (__NR_Linux + 209) +#define __NR_remap_file_pages (__NR_Linux + 210) +#define __NR_rt_sigreturn (__NR_Linux + 211) +#define __NR_set_tid_address (__NR_Linux + 212) +#define __NR_restart_syscall (__NR_Linux + 213) +#define __NR_semtimedop (__NR_Linux + 214) +#define __NR_fadvise64 (__NR_Linux + 215) +#define __NR_timer_create (__NR_Linux + 216) +#define __NR_timer_settime (__NR_Linux + 217) +#define __NR_timer_gettime (__NR_Linux + 218) +#define __NR_timer_getoverrun (__NR_Linux + 219) +#define __NR_timer_delete (__NR_Linux + 220) +#define __NR_clock_settime (__NR_Linux + 221) +#define __NR_clock_gettime (__NR_Linux + 222) +#define __NR_clock_getres (__NR_Linux + 223) +#define __NR_clock_nanosleep (__NR_Linux + 224) +#define __NR_tgkill (__NR_Linux + 225) +#define __NR_utimes (__NR_Linux + 226) +#define __NR_mbind (__NR_Linux + 227) +#define __NR_get_mempolicy (__NR_Linux + 228) +#define __NR_set_mempolicy (__NR_Linux + 229) +#define __NR_mq_open (__NR_Linux + 230) +#define __NR_mq_unlink (__NR_Linux + 231) +#define __NR_mq_timedsend (__NR_Linux + 232) +#define __NR_mq_timedreceive (__NR_Linux + 233) +#define __NR_mq_notify (__NR_Linux + 234) +#define __NR_mq_getsetattr (__NR_Linux + 235) +#define __NR_vserver (__NR_Linux + 236) +#define __NR_waitid (__NR_Linux + 237) +/* #define __NR_sys_setaltroot (__NR_Linux + 238) */ +#define __NR_add_key (__NR_Linux + 239) +#define __NR_request_key (__NR_Linux + 240) +#define __NR_keyctl (__NR_Linux + 241) +#define __NR_set_thread_area (__NR_Linux + 242) +#define __NR_inotify_init (__NR_Linux + 243) +#define __NR_inotify_add_watch (__NR_Linux + 244) +#define __NR_inotify_rm_watch (__NR_Linux + 245) +#define __NR_migrate_pages (__NR_Linux + 246) +#define __NR_openat (__NR_Linux + 247) +#define __NR_mkdirat (__NR_Linux + 248) +#define __NR_mknodat (__NR_Linux + 249) +#define __NR_fchownat (__NR_Linux + 250) +#define __NR_futimesat (__NR_Linux + 251) +#define __NR_newfstatat (__NR_Linux + 252) +#define __NR_unlinkat (__NR_Linux + 253) +#define __NR_renameat (__NR_Linux + 254) +#define __NR_linkat (__NR_Linux + 255) +#define __NR_symlinkat (__NR_Linux + 256) +#define __NR_readlinkat (__NR_Linux + 257) +#define __NR_fchmodat (__NR_Linux + 258) +#define __NR_faccessat (__NR_Linux + 259) +#define __NR_pselect6 (__NR_Linux + 260) +#define __NR_ppoll (__NR_Linux + 261) +#define __NR_unshare (__NR_Linux + 262) +#define __NR_splice (__NR_Linux + 263) +#define __NR_sync_file_range (__NR_Linux + 264) +#define __NR_tee (__NR_Linux + 265) +#define __NR_vmsplice (__NR_Linux + 266) +#define __NR_move_pages (__NR_Linux + 267) +#define __NR_set_robust_list (__NR_Linux + 268) +#define __NR_get_robust_list (__NR_Linux + 269) +#define __NR_kexec_load (__NR_Linux + 270) +#define __NR_getcpu (__NR_Linux + 271) +#define __NR_epoll_pwait (__NR_Linux + 272) +#define __NR_ioprio_set (__NR_Linux + 273) +#define __NR_ioprio_get (__NR_Linux + 274) +#define __NR_utimensat (__NR_Linux + 275) +#define __NR_signalfd (__NR_Linux + 276) +#define __NR_timerfd (__NR_Linux + 277) +#define __NR_eventfd (__NR_Linux + 278) +#define __NR_fallocate (__NR_Linux + 279) +#define __NR_timerfd_create (__NR_Linux + 280) +#define __NR_timerfd_gettime (__NR_Linux + 281) +#define __NR_timerfd_settime (__NR_Linux + 282) +#define __NR_signalfd4 (__NR_Linux + 283) +#define __NR_eventfd2 (__NR_Linux + 284) +#define __NR_epoll_create1 (__NR_Linux + 285) +#define __NR_dup3 (__NR_Linux + 286) +#define __NR_pipe2 (__NR_Linux + 287) +#define __NR_inotify_init1 (__NR_Linux + 288) + +/* + * Offset of the last Linux 64-bit flavoured syscall + */ +#define __NR_Linux_syscalls 288 + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ + +#define __NR_64_Linux 5000 +#define __NR_64_Linux_syscalls 288 + +#if _MIPS_SIM == _MIPS_SIM_NABI32 + +/* + * Linux N32 syscalls are in the range from 6000 to 6999. + */ +#define __NR_Linux 6000 +#define __NR_read (__NR_Linux + 0) +#define __NR_write (__NR_Linux + 1) +#define __NR_open (__NR_Linux + 2) +#define __NR_close (__NR_Linux + 3) +#define __NR_stat (__NR_Linux + 4) +#define __NR_fstat (__NR_Linux + 5) +#define __NR_lstat (__NR_Linux + 6) +#define __NR_poll (__NR_Linux + 7) +#define __NR_lseek (__NR_Linux + 8) +#define __NR_mmap (__NR_Linux + 9) +#define __NR_mprotect (__NR_Linux + 10) +#define __NR_munmap (__NR_Linux + 11) +#define __NR_brk (__NR_Linux + 12) +#define __NR_rt_sigaction (__NR_Linux + 13) +#define __NR_rt_sigprocmask (__NR_Linux + 14) +#define __NR_ioctl (__NR_Linux + 15) +#define __NR_pread64 (__NR_Linux + 16) +#define __NR_pwrite64 (__NR_Linux + 17) +#define __NR_readv (__NR_Linux + 18) +#define __NR_writev (__NR_Linux + 19) +#define __NR_access (__NR_Linux + 20) +#define __NR_pipe (__NR_Linux + 21) +#define __NR__newselect (__NR_Linux + 22) +#define __NR_sched_yield (__NR_Linux + 23) +#define __NR_mremap (__NR_Linux + 24) +#define __NR_msync (__NR_Linux + 25) +#define __NR_mincore (__NR_Linux + 26) +#define __NR_madvise (__NR_Linux + 27) +#define __NR_shmget (__NR_Linux + 28) +#define __NR_shmat (__NR_Linux + 29) +#define __NR_shmctl (__NR_Linux + 30) +#define __NR_dup (__NR_Linux + 31) +#define __NR_dup2 (__NR_Linux + 32) +#define __NR_pause (__NR_Linux + 33) +#define __NR_nanosleep (__NR_Linux + 34) +#define __NR_getitimer (__NR_Linux + 35) +#define __NR_setitimer (__NR_Linux + 36) +#define __NR_alarm (__NR_Linux + 37) +#define __NR_getpid (__NR_Linux + 38) +#define __NR_sendfile (__NR_Linux + 39) +#define __NR_socket (__NR_Linux + 40) +#define __NR_connect (__NR_Linux + 41) +#define __NR_accept (__NR_Linux + 42) +#define __NR_sendto (__NR_Linux + 43) +#define __NR_recvfrom (__NR_Linux + 44) +#define __NR_sendmsg (__NR_Linux + 45) +#define __NR_recvmsg (__NR_Linux + 46) +#define __NR_shutdown (__NR_Linux + 47) +#define __NR_bind (__NR_Linux + 48) +#define __NR_listen (__NR_Linux + 49) +#define __NR_getsockname (__NR_Linux + 50) +#define __NR_getpeername (__NR_Linux + 51) +#define __NR_socketpair (__NR_Linux + 52) +#define __NR_setsockopt (__NR_Linux + 53) +#define __NR_getsockopt (__NR_Linux + 54) +#define __NR_clone (__NR_Linux + 55) +#define __NR_fork (__NR_Linux + 56) +#define __NR_execve (__NR_Linux + 57) +#define __NR_exit (__NR_Linux + 58) +#define __NR_wait4 (__NR_Linux + 59) +#define __NR_kill (__NR_Linux + 60) +#define __NR_uname (__NR_Linux + 61) +#define __NR_semget (__NR_Linux + 62) +#define __NR_semop (__NR_Linux + 63) +#define __NR_semctl (__NR_Linux + 64) +#define __NR_shmdt (__NR_Linux + 65) +#define __NR_msgget (__NR_Linux + 66) +#define __NR_msgsnd (__NR_Linux + 67) +#define __NR_msgrcv (__NR_Linux + 68) +#define __NR_msgctl (__NR_Linux + 69) +#define __NR_fcntl (__NR_Linux + 70) +#define __NR_flock (__NR_Linux + 71) +#define __NR_fsync (__NR_Linux + 72) +#define __NR_fdatasync (__NR_Linux + 73) +#define __NR_truncate (__NR_Linux + 74) +#define __NR_ftruncate (__NR_Linux + 75) +#define __NR_getdents (__NR_Linux + 76) +#define __NR_getcwd (__NR_Linux + 77) +#define __NR_chdir (__NR_Linux + 78) +#define __NR_fchdir (__NR_Linux + 79) +#define __NR_rename (__NR_Linux + 80) +#define __NR_mkdir (__NR_Linux + 81) +#define __NR_rmdir (__NR_Linux + 82) +#define __NR_creat (__NR_Linux + 83) +#define __NR_link (__NR_Linux + 84) +#define __NR_unlink (__NR_Linux + 85) +#define __NR_symlink (__NR_Linux + 86) +#define __NR_readlink (__NR_Linux + 87) +#define __NR_chmod (__NR_Linux + 88) +#define __NR_fchmod (__NR_Linux + 89) +#define __NR_chown (__NR_Linux + 90) +#define __NR_fchown (__NR_Linux + 91) +#define __NR_lchown (__NR_Linux + 92) +#define __NR_umask (__NR_Linux + 93) +#define __NR_gettimeofday (__NR_Linux + 94) +#define __NR_getrlimit (__NR_Linux + 95) +#define __NR_getrusage (__NR_Linux + 96) +#define __NR_sysinfo (__NR_Linux + 97) +#define __NR_times (__NR_Linux + 98) +#define __NR_ptrace (__NR_Linux + 99) +#define __NR_getuid (__NR_Linux + 100) +#define __NR_syslog (__NR_Linux + 101) +#define __NR_getgid (__NR_Linux + 102) +#define __NR_setuid (__NR_Linux + 103) +#define __NR_setgid (__NR_Linux + 104) +#define __NR_geteuid (__NR_Linux + 105) +#define __NR_getegid (__NR_Linux + 106) +#define __NR_setpgid (__NR_Linux + 107) +#define __NR_getppid (__NR_Linux + 108) +#define __NR_getpgrp (__NR_Linux + 109) +#define __NR_setsid (__NR_Linux + 110) +#define __NR_setreuid (__NR_Linux + 111) +#define __NR_setregid (__NR_Linux + 112) +#define __NR_getgroups (__NR_Linux + 113) +#define __NR_setgroups (__NR_Linux + 114) +#define __NR_setresuid (__NR_Linux + 115) +#define __NR_getresuid (__NR_Linux + 116) +#define __NR_setresgid (__NR_Linux + 117) +#define __NR_getresgid (__NR_Linux + 118) +#define __NR_getpgid (__NR_Linux + 119) +#define __NR_setfsuid (__NR_Linux + 120) +#define __NR_setfsgid (__NR_Linux + 121) +#define __NR_getsid (__NR_Linux + 122) +#define __NR_capget (__NR_Linux + 123) +#define __NR_capset (__NR_Linux + 124) +#define __NR_rt_sigpending (__NR_Linux + 125) +#define __NR_rt_sigtimedwait (__NR_Linux + 126) +#define __NR_rt_sigqueueinfo (__NR_Linux + 127) +#define __NR_rt_sigsuspend (__NR_Linux + 128) +#define __NR_sigaltstack (__NR_Linux + 129) +#define __NR_utime (__NR_Linux + 130) +#define __NR_mknod (__NR_Linux + 131) +#define __NR_personality (__NR_Linux + 132) +#define __NR_ustat (__NR_Linux + 133) +#define __NR_statfs (__NR_Linux + 134) +#define __NR_fstatfs (__NR_Linux + 135) +#define __NR_sysfs (__NR_Linux + 136) +#define __NR_getpriority (__NR_Linux + 137) +#define __NR_setpriority (__NR_Linux + 138) +#define __NR_sched_setparam (__NR_Linux + 139) +#define __NR_sched_getparam (__NR_Linux + 140) +#define __NR_sched_setscheduler (__NR_Linux + 141) +#define __NR_sched_getscheduler (__NR_Linux + 142) +#define __NR_sched_get_priority_max (__NR_Linux + 143) +#define __NR_sched_get_priority_min (__NR_Linux + 144) +#define __NR_sched_rr_get_interval (__NR_Linux + 145) +#define __NR_mlock (__NR_Linux + 146) +#define __NR_munlock (__NR_Linux + 147) +#define __NR_mlockall (__NR_Linux + 148) +#define __NR_munlockall (__NR_Linux + 149) +#define __NR_vhangup (__NR_Linux + 150) +#define __NR_pivot_root (__NR_Linux + 151) +#define __NR__sysctl (__NR_Linux + 152) +#define __NR_prctl (__NR_Linux + 153) +#define __NR_adjtimex (__NR_Linux + 154) +#define __NR_setrlimit (__NR_Linux + 155) +#define __NR_chroot (__NR_Linux + 156) +#define __NR_sync (__NR_Linux + 157) +#define __NR_acct (__NR_Linux + 158) +#define __NR_settimeofday (__NR_Linux + 159) +#define __NR_mount (__NR_Linux + 160) +#define __NR_umount2 (__NR_Linux + 161) +#define __NR_swapon (__NR_Linux + 162) +#define __NR_swapoff (__NR_Linux + 163) +#define __NR_reboot (__NR_Linux + 164) +#define __NR_sethostname (__NR_Linux + 165) +#define __NR_setdomainname (__NR_Linux + 166) +#define __NR_create_module (__NR_Linux + 167) +#define __NR_init_module (__NR_Linux + 168) +#define __NR_delete_module (__NR_Linux + 169) +#define __NR_get_kernel_syms (__NR_Linux + 170) +#define __NR_query_module (__NR_Linux + 171) +#define __NR_quotactl (__NR_Linux + 172) +#define __NR_nfsservctl (__NR_Linux + 173) +#define __NR_getpmsg (__NR_Linux + 174) +#define __NR_putpmsg (__NR_Linux + 175) +#define __NR_afs_syscall (__NR_Linux + 176) +#define __NR_reserved177 (__NR_Linux + 177) +#define __NR_gettid (__NR_Linux + 178) +#define __NR_readahead (__NR_Linux + 179) +#define __NR_setxattr (__NR_Linux + 180) +#define __NR_lsetxattr (__NR_Linux + 181) +#define __NR_fsetxattr (__NR_Linux + 182) +#define __NR_getxattr (__NR_Linux + 183) +#define __NR_lgetxattr (__NR_Linux + 184) +#define __NR_fgetxattr (__NR_Linux + 185) +#define __NR_listxattr (__NR_Linux + 186) +#define __NR_llistxattr (__NR_Linux + 187) +#define __NR_flistxattr (__NR_Linux + 188) +#define __NR_removexattr (__NR_Linux + 189) +#define __NR_lremovexattr (__NR_Linux + 190) +#define __NR_fremovexattr (__NR_Linux + 191) +#define __NR_tkill (__NR_Linux + 192) +#define __NR_reserved193 (__NR_Linux + 193) +#define __NR_futex (__NR_Linux + 194) +#define __NR_sched_setaffinity (__NR_Linux + 195) +#define __NR_sched_getaffinity (__NR_Linux + 196) +#define __NR_cacheflush (__NR_Linux + 197) +#define __NR_cachectl (__NR_Linux + 198) +#define __NR_sysmips (__NR_Linux + 199) +#define __NR_io_setup (__NR_Linux + 200) +#define __NR_io_destroy (__NR_Linux + 201) +#define __NR_io_getevents (__NR_Linux + 202) +#define __NR_io_submit (__NR_Linux + 203) +#define __NR_io_cancel (__NR_Linux + 204) +#define __NR_exit_group (__NR_Linux + 205) +#define __NR_lookup_dcookie (__NR_Linux + 206) +#define __NR_epoll_create (__NR_Linux + 207) +#define __NR_epoll_ctl (__NR_Linux + 208) +#define __NR_epoll_wait (__NR_Linux + 209) +#define __NR_remap_file_pages (__NR_Linux + 210) +#define __NR_rt_sigreturn (__NR_Linux + 211) +#define __NR_fcntl64 (__NR_Linux + 212) +#define __NR_set_tid_address (__NR_Linux + 213) +#define __NR_restart_syscall (__NR_Linux + 214) +#define __NR_semtimedop (__NR_Linux + 215) +#define __NR_fadvise64 (__NR_Linux + 216) +#define __NR_statfs64 (__NR_Linux + 217) +#define __NR_fstatfs64 (__NR_Linux + 218) +#define __NR_sendfile64 (__NR_Linux + 219) +#define __NR_timer_create (__NR_Linux + 220) +#define __NR_timer_settime (__NR_Linux + 221) +#define __NR_timer_gettime (__NR_Linux + 222) +#define __NR_timer_getoverrun (__NR_Linux + 223) +#define __NR_timer_delete (__NR_Linux + 224) +#define __NR_clock_settime (__NR_Linux + 225) +#define __NR_clock_gettime (__NR_Linux + 226) +#define __NR_clock_getres (__NR_Linux + 227) +#define __NR_clock_nanosleep (__NR_Linux + 228) +#define __NR_tgkill (__NR_Linux + 229) +#define __NR_utimes (__NR_Linux + 230) +#define __NR_mbind (__NR_Linux + 231) +#define __NR_get_mempolicy (__NR_Linux + 232) +#define __NR_set_mempolicy (__NR_Linux + 233) +#define __NR_mq_open (__NR_Linux + 234) +#define __NR_mq_unlink (__NR_Linux + 235) +#define __NR_mq_timedsend (__NR_Linux + 236) +#define __NR_mq_timedreceive (__NR_Linux + 237) +#define __NR_mq_notify (__NR_Linux + 238) +#define __NR_mq_getsetattr (__NR_Linux + 239) +#define __NR_vserver (__NR_Linux + 240) +#define __NR_waitid (__NR_Linux + 241) +/* #define __NR_sys_setaltroot (__NR_Linux + 242) */ +#define __NR_add_key (__NR_Linux + 243) +#define __NR_request_key (__NR_Linux + 244) +#define __NR_keyctl (__NR_Linux + 245) +#define __NR_set_thread_area (__NR_Linux + 246) +#define __NR_inotify_init (__NR_Linux + 247) +#define __NR_inotify_add_watch (__NR_Linux + 248) +#define __NR_inotify_rm_watch (__NR_Linux + 249) +#define __NR_migrate_pages (__NR_Linux + 250) +#define __NR_openat (__NR_Linux + 251) +#define __NR_mkdirat (__NR_Linux + 252) +#define __NR_mknodat (__NR_Linux + 253) +#define __NR_fchownat (__NR_Linux + 254) +#define __NR_futimesat (__NR_Linux + 255) +#define __NR_newfstatat (__NR_Linux + 256) +#define __NR_unlinkat (__NR_Linux + 257) +#define __NR_renameat (__NR_Linux + 258) +#define __NR_linkat (__NR_Linux + 259) +#define __NR_symlinkat (__NR_Linux + 260) +#define __NR_readlinkat (__NR_Linux + 261) +#define __NR_fchmodat (__NR_Linux + 262) +#define __NR_faccessat (__NR_Linux + 263) +#define __NR_pselect6 (__NR_Linux + 264) +#define __NR_ppoll (__NR_Linux + 265) +#define __NR_unshare (__NR_Linux + 266) +#define __NR_splice (__NR_Linux + 267) +#define __NR_sync_file_range (__NR_Linux + 268) +#define __NR_tee (__NR_Linux + 269) +#define __NR_vmsplice (__NR_Linux + 270) +#define __NR_move_pages (__NR_Linux + 271) +#define __NR_set_robust_list (__NR_Linux + 272) +#define __NR_get_robust_list (__NR_Linux + 273) +#define __NR_kexec_load (__NR_Linux + 274) +#define __NR_getcpu (__NR_Linux + 275) +#define __NR_epoll_pwait (__NR_Linux + 276) +#define __NR_ioprio_set (__NR_Linux + 277) +#define __NR_ioprio_get (__NR_Linux + 278) +#define __NR_utimensat (__NR_Linux + 279) +#define __NR_signalfd (__NR_Linux + 280) +#define __NR_timerfd (__NR_Linux + 281) +#define __NR_eventfd (__NR_Linux + 282) +#define __NR_fallocate (__NR_Linux + 283) +#define __NR_timerfd_create (__NR_Linux + 284) +#define __NR_timerfd_gettime (__NR_Linux + 285) +#define __NR_timerfd_settime (__NR_Linux + 286) +#define __NR_signalfd4 (__NR_Linux + 287) +#define __NR_eventfd2 (__NR_Linux + 288) +#define __NR_epoll_create1 (__NR_Linux + 289) +#define __NR_dup3 (__NR_Linux + 290) +#define __NR_pipe2 (__NR_Linux + 291) +#define __NR_inotify_init1 (__NR_Linux + 292) + +/* + * Offset of the last N32 flavoured syscall + */ +#define __NR_Linux_syscalls 292 + +#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ + +#define __NR_N32_Linux 6000 +#define __NR_N32_Linux_syscalls 292 + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +#define __ARCH_OMIT_COMPAT_SYS_GETDENTS64 +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +# ifdef CONFIG_32BIT +# define __ARCH_WANT_STAT64 +# define __ARCH_WANT_SYS_TIME +# endif +# ifdef CONFIG_MIPS32_O32 +# define __ARCH_WANT_COMPAT_SYS_TIME +# endif + +/* whitelists for checksyscalls */ +#define __IGNORE_select +#define __IGNORE_vfork +#define __IGNORE_time +#define __IGNORE_uselib +#define __IGNORE_fadvise64_64 +#define __IGNORE_getdents64 +#if _MIPS_SIM == _MIPS_SIM_NABI32 +#define __IGNORE_truncate64 +#define __IGNORE_ftruncate64 +#define __IGNORE_stat64 +#define __IGNORE_lstat64 +#define __IGNORE_fstat64 +#define __IGNORE_fstatat64 +#endif + +#endif /* !__ASSEMBLY__ */ + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n" #x "\t=\tsys_ni_syscall") + +#endif /* __KERNEL__ */ +#endif /* _ASM_UNISTD_H */ diff --git a/arch/mips/include/asm/user.h b/arch/mips/include/asm/user.h new file mode 100644 index 000000000000..afa83a4c1888 --- /dev/null +++ b/arch/mips/include/asm/user.h @@ -0,0 +1,58 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle + */ +#ifndef _ASM_USER_H +#define _ASM_USER_H + +#include <asm/page.h> +#include <asm/reg.h> + +/* + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd, NOT the irix-core). The file + * contents are as follows: + * + * upage: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page long. + * data: The data segment follows next. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * stack: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these in order to be able + * to write an integer number of pages. + */ +struct user { + unsigned long regs[EF_SIZE / /* integer and fp regs */ + sizeof(unsigned long) + 64]; + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + unsigned long u_ar0; /* help gdb find registers */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* _ASM_USER_H */ diff --git a/arch/mips/include/asm/vga.h b/arch/mips/include/asm/vga.h new file mode 100644 index 000000000000..f4cff7e4fa8a --- /dev/null +++ b/arch/mips/include/asm/vga.h @@ -0,0 +1,47 @@ +/* + * Access to VGA videoram + * + * (c) 1998 Martin Mares <mj@ucw.cz> + */ +#ifndef _ASM_VGA_H +#define _ASM_VGA_H + +#include <asm/byteorder.h> + +/* + * On the PC, we can just recalculate addresses and then + * access the videoram directly without any black magic. + */ + +#define VGA_MAP_MEM(x, s) (0xb0000000L + (unsigned long)(x)) + +#define vga_readb(x) (*(x)) +#define vga_writeb(x, y) (*(y) = (x)) + +#define VT_BUF_HAVE_RW +/* + * These are only needed for supporting VGA or MDA text mode, which use little + * endian byte ordering. + * In other cases, we can optimize by using native byte ordering and + * <linux/vt_buffer.h> has already done the right job for us. + */ + +#undef scr_writew +#undef scr_readw + +static inline void scr_writew(u16 val, volatile u16 *addr) +{ + *addr = cpu_to_le16(val); +} + +static inline u16 scr_readw(volatile const u16 *addr) +{ + return le16_to_cpu(*addr); +} + +#define scr_memcpyw(d, s, c) memcpy(d, s, c) +#define scr_memmovew(d, s, c) memmove(d, s, c) +#define VT_BUF_HAVE_MEMCPYW +#define VT_BUF_HAVE_MEMMOVEW + +#endif /* _ASM_VGA_H */ diff --git a/arch/mips/include/asm/vpe.h b/arch/mips/include/asm/vpe.h new file mode 100644 index 000000000000..c6e1b961537d --- /dev/null +++ b/arch/mips/include/asm/vpe.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ + +#ifndef _ASM_VPE_H +#define _ASM_VPE_H + +struct vpe_notifications { + void (*start)(int vpe); + void (*stop)(int vpe); + + struct list_head list; +}; + + +extern int vpe_notify(int index, struct vpe_notifications *notify); + +extern void *vpe_get_shared(int index); +extern int vpe_getuid(int index); +extern int vpe_getgid(int index); +extern char *vpe_getcwd(int index); + +#endif /* _ASM_VPE_H */ diff --git a/arch/mips/include/asm/vr41xx/capcella.h b/arch/mips/include/asm/vr41xx/capcella.h new file mode 100644 index 000000000000..e0ee05a3dfcc --- /dev/null +++ b/arch/mips/include/asm/vr41xx/capcella.h @@ -0,0 +1,43 @@ +/* + * capcella.h, Include file for ZAO Networks Capcella. + * + * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ZAO_CAPCELLA_H +#define __ZAO_CAPCELLA_H + +#include <asm/vr41xx/irq.h> + +/* + * General-Purpose I/O Pin Number + */ +#define PC104PLUS_INTA_PIN 2 +#define PC104PLUS_INTB_PIN 3 +#define PC104PLUS_INTC_PIN 4 +#define PC104PLUS_INTD_PIN 5 + +/* + * Interrupt Number + */ +#define RTL8139_1_IRQ GIU_IRQ(PC104PLUS_INTC_PIN) +#define RTL8139_2_IRQ GIU_IRQ(PC104PLUS_INTD_PIN) +#define PC104PLUS_INTA_IRQ GIU_IRQ(PC104PLUS_INTA_PIN) +#define PC104PLUS_INTB_IRQ GIU_IRQ(PC104PLUS_INTB_PIN) +#define PC104PLUS_INTC_IRQ GIU_IRQ(PC104PLUS_INTC_PIN) +#define PC104PLUS_INTD_IRQ GIU_IRQ(PC104PLUS_INTD_PIN) + +#endif /* __ZAO_CAPCELLA_H */ diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h new file mode 100644 index 000000000000..0bcdd3a5c256 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/giu.h @@ -0,0 +1,78 @@ +/* + * Include file for NEC VR4100 series General-purpose I/O Unit. + * + * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __NEC_VR41XX_GIU_H +#define __NEC_VR41XX_GIU_H + +/* + * NEC VR4100 series GIU platform device IDs. + */ +enum { + GPIO_50PINS_PULLUPDOWN, + GPIO_36PINS, + GPIO_48PINS_EDGE_SELECT, +}; + +typedef enum { + IRQ_TRIGGER_LEVEL, + IRQ_TRIGGER_EDGE, + IRQ_TRIGGER_EDGE_FALLING, + IRQ_TRIGGER_EDGE_RISING, +} irq_trigger_t; + +typedef enum { + IRQ_SIGNAL_THROUGH, + IRQ_SIGNAL_HOLD, +} irq_signal_t; + +extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal); + +typedef enum { + IRQ_LEVEL_LOW, + IRQ_LEVEL_HIGH, +} irq_level_t; + +extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level); + +typedef enum { + GPIO_DATA_LOW, + GPIO_DATA_HIGH, + GPIO_DATA_INVAL, +} gpio_data_t; + +extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin); +extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data); + +typedef enum { + GPIO_INPUT, + GPIO_OUTPUT, + GPIO_OUTPUT_DISABLE, +} gpio_direction_t; + +extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir); + +typedef enum { + GPIO_PULL_DOWN, + GPIO_PULL_UP, + GPIO_PULL_DISABLE, +} gpio_pull_t; + +extern int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull); + +#endif /* __NEC_VR41XX_GIU_H */ diff --git a/arch/mips/include/asm/vr41xx/irq.h b/arch/mips/include/asm/vr41xx/irq.h new file mode 100644 index 000000000000..d315dfbc08f2 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/irq.h @@ -0,0 +1,101 @@ +/* + * include/asm-mips/vr41xx/irq.h + * + * Interrupt numbers for NEC VR4100 series. + * + * Copyright (C) 1999 Michael Klar + * Copyright (C) 2001, 2002 Paul Mundt + * Copyright (C) 2002 MontaVista Software, Inc. + * Copyright (C) 2002 TimeSys Corp. + * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __NEC_VR41XX_IRQ_H +#define __NEC_VR41XX_IRQ_H + +/* + * CPU core Interrupt Numbers + */ +#define MIPS_CPU_IRQ_BASE 0 +#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x)) +#define MIPS_SOFTINT0_IRQ MIPS_CPU_IRQ(0) +#define MIPS_SOFTINT1_IRQ MIPS_CPU_IRQ(1) +#define INT0_IRQ MIPS_CPU_IRQ(2) +#define INT1_IRQ MIPS_CPU_IRQ(3) +#define INT2_IRQ MIPS_CPU_IRQ(4) +#define INT3_IRQ MIPS_CPU_IRQ(5) +#define INT4_IRQ MIPS_CPU_IRQ(6) +#define TIMER_IRQ MIPS_CPU_IRQ(7) + +/* + * SYINT1 Interrupt Numbers + */ +#define SYSINT1_IRQ_BASE 8 +#define SYSINT1_IRQ(x) (SYSINT1_IRQ_BASE + (x)) +#define BATTRY_IRQ SYSINT1_IRQ(0) +#define POWER_IRQ SYSINT1_IRQ(1) +#define RTCLONG1_IRQ SYSINT1_IRQ(2) +#define ELAPSEDTIME_IRQ SYSINT1_IRQ(3) +/* RFU */ +#define PIU_IRQ SYSINT1_IRQ(5) +#define AIU_IRQ SYSINT1_IRQ(6) +#define KIU_IRQ SYSINT1_IRQ(7) +#define GIUINT_IRQ SYSINT1_IRQ(8) +#define SIU_IRQ SYSINT1_IRQ(9) +#define BUSERR_IRQ SYSINT1_IRQ(10) +#define SOFTINT_IRQ SYSINT1_IRQ(11) +#define CLKRUN_IRQ SYSINT1_IRQ(12) +#define DOZEPIU_IRQ SYSINT1_IRQ(13) +#define SYSINT1_IRQ_LAST DOZEPIU_IRQ + +/* + * SYSINT2 Interrupt Numbers + */ +#define SYSINT2_IRQ_BASE 24 +#define SYSINT2_IRQ(x) (SYSINT2_IRQ_BASE + (x)) +#define RTCLONG2_IRQ SYSINT2_IRQ(0) +#define LED_IRQ SYSINT2_IRQ(1) +#define HSP_IRQ SYSINT2_IRQ(2) +#define TCLOCK_IRQ SYSINT2_IRQ(3) +#define FIR_IRQ SYSINT2_IRQ(4) +#define CEU_IRQ SYSINT2_IRQ(4) /* same number as FIR_IRQ */ +#define DSIU_IRQ SYSINT2_IRQ(5) +#define PCI_IRQ SYSINT2_IRQ(6) +#define SCU_IRQ SYSINT2_IRQ(7) +#define CSI_IRQ SYSINT2_IRQ(8) +#define BCU_IRQ SYSINT2_IRQ(9) +#define ETHERNET_IRQ SYSINT2_IRQ(10) +#define SYSINT2_IRQ_LAST ETHERNET_IRQ + +/* + * GIU Interrupt Numbers + */ +#define GIU_IRQ_BASE 40 +#define GIU_IRQ(x) (GIU_IRQ_BASE + (x)) /* IRQ 40-71 */ +#define GIU_IRQ_LAST GIU_IRQ(31) + +/* + * VRC4173 Interrupt Numbers + */ +#define VRC4173_IRQ_BASE 72 +#define VRC4173_IRQ(x) (VRC4173_IRQ_BASE + (x)) +#define VRC4173_USB_IRQ VRC4173_IRQ(0) +#define VRC4173_PCMCIA2_IRQ VRC4173_IRQ(1) +#define VRC4173_PCMCIA1_IRQ VRC4173_IRQ(2) +#define VRC4173_PS2CH2_IRQ VRC4173_IRQ(3) +#define VRC4173_PS2CH1_IRQ VRC4173_IRQ(4) +#define VRC4173_PIU_IRQ VRC4173_IRQ(5) +#define VRC4173_AIU_IRQ VRC4173_IRQ(6) +#define VRC4173_KIU_IRQ VRC4173_IRQ(7) +#define VRC4173_GIU_IRQ VRC4173_IRQ(8) +#define VRC4173_AC97_IRQ VRC4173_IRQ(9) +#define VRC4173_AC97INT1_IRQ VRC4173_IRQ(10) +/* RFU */ +#define VRC4173_DOZEPIU_IRQ VRC4173_IRQ(13) +#define VRC4173_IRQ_LAST VRC4173_DOZEPIU_IRQ + +#endif /* __NEC_VR41XX_IRQ_H */ diff --git a/arch/mips/include/asm/vr41xx/mpc30x.h b/arch/mips/include/asm/vr41xx/mpc30x.h new file mode 100644 index 000000000000..1d67df843dc3 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/mpc30x.h @@ -0,0 +1,37 @@ +/* + * mpc30x.h, Include file for Victor MP-C303/304. + * + * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __VICTOR_MPC30X_H +#define __VICTOR_MPC30X_H + +#include <asm/vr41xx/irq.h> + +/* + * General-Purpose I/O Pin Number + */ +#define VRC4173_PIN 1 +#define MQ200_PIN 4 + +/* + * Interrupt Number + */ +#define VRC4173_CASCADE_IRQ GIU_IRQ(VRC4173_PIN) +#define MQ200_IRQ GIU_IRQ(MQ200_PIN) + +#endif /* __VICTOR_MPC30X_H */ diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h new file mode 100644 index 000000000000..6fc01ce19777 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/pci.h @@ -0,0 +1,90 @@ +/* + * Include file for NEC VR4100 series PCI Control Unit. + * + * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __NEC_VR41XX_PCI_H +#define __NEC_VR41XX_PCI_H + +#define PCI_MASTER_ADDRESS_MASK 0x7fffffffU + +struct pci_master_address_conversion { + uint32_t bus_base_address; + uint32_t address_mask; + uint32_t pci_base_address; +}; + +struct pci_target_address_conversion { + uint32_t address_mask; + uint32_t bus_base_address; +}; + +typedef enum { + CANNOT_LOCK_FROM_DEVICE, + CAN_LOCK_FROM_DEVICE, +} pci_exclusive_access_t; + +struct pci_mailbox_address { + uint32_t base_address; +}; + +struct pci_target_address_window { + uint32_t base_address; +}; + +typedef enum { + PCI_ARBITRATION_MODE_FAIR, + PCI_ARBITRATION_MODE_ALTERNATE_0, + PCI_ARBITRATION_MODE_ALTERNATE_B, +} pci_arbiter_priority_control_t; + +typedef enum { + PCI_TAKE_AWAY_GNT_DISABLE, + PCI_TAKE_AWAY_GNT_ENABLE, +} pci_take_away_gnt_mode_t; + +struct pci_controller_unit_setup { + struct pci_master_address_conversion *master_memory1; + struct pci_master_address_conversion *master_memory2; + + struct pci_target_address_conversion *target_memory1; + struct pci_target_address_conversion *target_memory2; + + struct pci_master_address_conversion *master_io; + + pci_exclusive_access_t exclusive_access; + + uint32_t pci_clock_max; + uint8_t wait_time_limit_from_irdy_to_trdy; /* Only VR4122 is supported */ + + struct pci_mailbox_address *mailbox; + struct pci_target_address_window *target_window1; + struct pci_target_address_window *target_window2; + + uint8_t master_latency_timer; + uint8_t retry_limit; + + pci_arbiter_priority_control_t arbiter_priority_control; + pci_take_away_gnt_mode_t take_away_gnt_mode; + + struct resource *mem_resource; + struct resource *io_resource; +}; + +extern void vr41xx_pciu_setup(struct pci_controller_unit_setup *setup); + +#endif /* __NEC_VR41XX_PCI_H */ diff --git a/arch/mips/include/asm/vr41xx/siu.h b/arch/mips/include/asm/vr41xx/siu.h new file mode 100644 index 000000000000..da9f6e373409 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/siu.h @@ -0,0 +1,58 @@ +/* + * Include file for NEC VR4100 series Serial Interface Unit. + * + * Copyright (C) 2005-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __NEC_VR41XX_SIU_H +#define __NEC_VR41XX_SIU_H + +#define SIU_PORTS_MAX 2 + +typedef enum { + SIU_INTERFACE_RS232C, + SIU_INTERFACE_IRDA, +} siu_interface_t; + +extern void vr41xx_select_siu_interface(siu_interface_t interface); + +typedef enum { + SIU_USE_IRDA, + FIR_USE_IRDA, +} irda_use_t; + +extern void vr41xx_use_irda(irda_use_t use); + +typedef enum { + SHARP_IRDA, + TEMIC_IRDA, + HP_IRDA, +} irda_module_t; + +typedef enum { + IRDA_TX_1_5MBPS, + IRDA_TX_4MBPS, +} irda_speed_t; + +extern void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed); + +#ifdef CONFIG_SERIAL_VR41XX_CONSOLE +extern void vr41xx_siu_early_setup(struct uart_port *port); +#else +static inline void vr41xx_siu_early_setup(struct uart_port *port) {} +#endif + +#endif /* __NEC_VR41XX_SIU_H */ diff --git a/arch/mips/include/asm/vr41xx/tb0219.h b/arch/mips/include/asm/vr41xx/tb0219.h new file mode 100644 index 000000000000..dc981b4be0a4 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/tb0219.h @@ -0,0 +1,42 @@ +/* + * tb0219.h, Include file for TANBAC TB0219. + * + * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * Modified for TANBAC TB0219: + * Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __TANBAC_TB0219_H +#define __TANBAC_TB0219_H + +#include <asm/vr41xx/irq.h> + +/* + * General-Purpose I/O Pin Number + */ +#define TB0219_PCI_SLOT1_PIN 2 +#define TB0219_PCI_SLOT2_PIN 3 +#define TB0219_PCI_SLOT3_PIN 4 + +/* + * Interrupt Number + */ +#define TB0219_PCI_SLOT1_IRQ GIU_IRQ(TB0219_PCI_SLOT1_PIN) +#define TB0219_PCI_SLOT2_IRQ GIU_IRQ(TB0219_PCI_SLOT2_PIN) +#define TB0219_PCI_SLOT3_IRQ GIU_IRQ(TB0219_PCI_SLOT3_PIN) + +#endif /* __TANBAC_TB0219_H */ diff --git a/arch/mips/include/asm/vr41xx/tb0226.h b/arch/mips/include/asm/vr41xx/tb0226.h new file mode 100644 index 000000000000..de527dcfa5f3 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/tb0226.h @@ -0,0 +1,43 @@ +/* + * tb0226.h, Include file for TANBAC TB0226. + * + * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __TANBAC_TB0226_H +#define __TANBAC_TB0226_H + +#include <asm/vr41xx/irq.h> + +/* + * General-Purpose I/O Pin Number + */ +#define GD82559_1_PIN 2 +#define GD82559_2_PIN 3 +#define UPD720100_INTA_PIN 4 +#define UPD720100_INTB_PIN 8 +#define UPD720100_INTC_PIN 13 + +/* + * Interrupt Number + */ +#define GD82559_1_IRQ GIU_IRQ(GD82559_1_PIN) +#define GD82559_2_IRQ GIU_IRQ(GD82559_2_PIN) +#define UPD720100_INTA_IRQ GIU_IRQ(UPD720100_INTA_PIN) +#define UPD720100_INTB_IRQ GIU_IRQ(UPD720100_INTB_PIN) +#define UPD720100_INTC_IRQ GIU_IRQ(UPD720100_INTC_PIN) + +#endif /* __TANBAC_TB0226_H */ diff --git a/arch/mips/include/asm/vr41xx/tb0287.h b/arch/mips/include/asm/vr41xx/tb0287.h new file mode 100644 index 000000000000..61bead68abf0 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/tb0287.h @@ -0,0 +1,43 @@ +/* + * tb0287.h, Include file for TANBAC TB0287 mini-ITX board. + * + * Copyright (C) 2005 Media Lab Inc. <ito@mlb.co.jp> + * + * This code is largely based on tb0219.h. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __TANBAC_TB0287_H +#define __TANBAC_TB0287_H + +#include <asm/vr41xx/irq.h> + +/* + * General-Purpose I/O Pin Number + */ +#define TB0287_PCI_SLOT_PIN 2 +#define TB0287_SM501_PIN 3 +#define TB0287_SIL680A_PIN 8 +#define TB0287_RTL8110_PIN 13 + +/* + * Interrupt Number + */ +#define TB0287_PCI_SLOT_IRQ GIU_IRQ(TB0287_PCI_SLOT_PIN) +#define TB0287_SM501_IRQ GIU_IRQ(TB0287_SM501_PIN) +#define TB0287_SIL680A_IRQ GIU_IRQ(TB0287_SIL680A_PIN) +#define TB0287_RTL8110_IRQ GIU_IRQ(TB0287_RTL8110_PIN) + +#endif /* __TANBAC_TB0287_H */ diff --git a/arch/mips/include/asm/vr41xx/vr41xx.h b/arch/mips/include/asm/vr41xx/vr41xx.h new file mode 100644 index 000000000000..22be64971cc6 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/vr41xx.h @@ -0,0 +1,152 @@ +/* + * include/asm-mips/vr41xx/vr41xx.h + * + * Include file for NEC VR4100 series. + * + * Copyright (C) 1999 Michael Klar + * Copyright (C) 2001, 2002 Paul Mundt + * Copyright (C) 2002 MontaVista Software, Inc. + * Copyright (C) 2002 TimeSys Corp. + * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __NEC_VR41XX_H +#define __NEC_VR41XX_H + +#include <linux/interrupt.h> + +/* + * CPU Revision + */ +/* VR4122 0x00000c70-0x00000c72 */ +#define PRID_VR4122_REV1_0 0x00000c70 +#define PRID_VR4122_REV2_0 0x00000c70 +#define PRID_VR4122_REV2_1 0x00000c70 +#define PRID_VR4122_REV3_0 0x00000c71 +#define PRID_VR4122_REV3_1 0x00000c72 + +/* VR4181A 0x00000c73-0x00000c7f */ +#define PRID_VR4181A_REV1_0 0x00000c73 +#define PRID_VR4181A_REV1_1 0x00000c74 + +/* VR4131 0x00000c80-0x00000c83 */ +#define PRID_VR4131_REV1_2 0x00000c80 +#define PRID_VR4131_REV2_0 0x00000c81 +#define PRID_VR4131_REV2_1 0x00000c82 +#define PRID_VR4131_REV2_2 0x00000c83 + +/* VR4133 0x00000c84- */ +#define PRID_VR4133 0x00000c84 + +/* + * Bus Control Uint + */ +extern unsigned long vr41xx_calculate_clock_frequency(void); +extern unsigned long vr41xx_get_vtclock_frequency(void); +extern unsigned long vr41xx_get_tclock_frequency(void); + +/* + * Clock Mask Unit + */ +typedef enum { + PIU_CLOCK, + SIU_CLOCK, + AIU_CLOCK, + KIU_CLOCK, + FIR_CLOCK, + DSIU_CLOCK, + CSI_CLOCK, + PCIU_CLOCK, + HSP_CLOCK, + PCI_CLOCK, + CEU_CLOCK, + ETHER0_CLOCK, + ETHER1_CLOCK +} vr41xx_clock_t; + +extern void vr41xx_supply_clock(vr41xx_clock_t clock); +extern void vr41xx_mask_clock(vr41xx_clock_t clock); + +/* + * Interrupt Control Unit + */ +extern int vr41xx_set_intassign(unsigned int irq, unsigned char intassign); +extern int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int)); + +#define PIUINT_COMMAND 0x0040 +#define PIUINT_DATA 0x0020 +#define PIUINT_PAGE1 0x0010 +#define PIUINT_PAGE0 0x0008 +#define PIUINT_DATALOST 0x0004 +#define PIUINT_STATUSCHANGE 0x0001 + +extern void vr41xx_enable_piuint(uint16_t mask); +extern void vr41xx_disable_piuint(uint16_t mask); + +#define AIUINT_INPUT_DMAEND 0x0800 +#define AIUINT_INPUT_DMAHALT 0x0400 +#define AIUINT_INPUT_DATALOST 0x0200 +#define AIUINT_INPUT_DATA 0x0100 +#define AIUINT_OUTPUT_DMAEND 0x0008 +#define AIUINT_OUTPUT_DMAHALT 0x0004 +#define AIUINT_OUTPUT_NODATA 0x0002 + +extern void vr41xx_enable_aiuint(uint16_t mask); +extern void vr41xx_disable_aiuint(uint16_t mask); + +#define KIUINT_DATALOST 0x0004 +#define KIUINT_DATAREADY 0x0002 +#define KIUINT_SCAN 0x0001 + +extern void vr41xx_enable_kiuint(uint16_t mask); +extern void vr41xx_disable_kiuint(uint16_t mask); + +#define DSIUINT_CTS 0x0800 +#define DSIUINT_RXERR 0x0400 +#define DSIUINT_RX 0x0200 +#define DSIUINT_TX 0x0100 +#define DSIUINT_ALL 0x0f00 + +extern void vr41xx_enable_dsiuint(uint16_t mask); +extern void vr41xx_disable_dsiuint(uint16_t mask); + +#define FIRINT_UNIT 0x0010 +#define FIRINT_RX_DMAEND 0x0008 +#define FIRINT_RX_DMAHALT 0x0004 +#define FIRINT_TX_DMAEND 0x0002 +#define FIRINT_TX_DMAHALT 0x0001 + +extern void vr41xx_enable_firint(uint16_t mask); +extern void vr41xx_disable_firint(uint16_t mask); + +extern void vr41xx_enable_pciint(void); +extern void vr41xx_disable_pciint(void); + +extern void vr41xx_enable_scuint(void); +extern void vr41xx_disable_scuint(void); + +#define CSIINT_TX_DMAEND 0x0040 +#define CSIINT_TX_DMAHALT 0x0020 +#define CSIINT_TX_DATA 0x0010 +#define CSIINT_TX_FIFOEMPTY 0x0008 +#define CSIINT_RX_DMAEND 0x0004 +#define CSIINT_RX_DMAHALT 0x0002 +#define CSIINT_RX_FIFOEMPTY 0x0001 + +extern void vr41xx_enable_csiint(uint16_t mask); +extern void vr41xx_disable_csiint(uint16_t mask); + +extern void vr41xx_enable_bcuint(void); +extern void vr41xx_disable_bcuint(void); + +#ifdef CONFIG_SERIAL_VR41XX_CONSOLE +extern void vr41xx_siu_setup(void); +#else +static inline void vr41xx_siu_setup(void) {} +#endif + +#endif /* __NEC_VR41XX_H */ diff --git a/arch/mips/include/asm/war.h b/arch/mips/include/asm/war.h new file mode 100644 index 000000000000..22361d5e3bf0 --- /dev/null +++ b/arch/mips/include/asm/war.h @@ -0,0 +1,244 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + * Copyright (C) 2007 Maciej W. Rozycki + */ +#ifndef _ASM_WAR_H +#define _ASM_WAR_H + +#include <war.h> + +/* + * Work around certain R4000 CPU errata (as implemented by GCC): + * + * - A double-word or a variable shift may give an incorrect result + * if executed immediately after starting an integer division: + * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", + * erratum #28 + * "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum + * #19 + * + * - A double-word or a variable shift may give an incorrect result + * if executed while an integer multiplication is in progress: + * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", + * errata #16 & #28 + * + * - An integer division may give an incorrect result if started in + * a delay slot of a taken branch or a jump: + * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", + * erratum #52 + */ +#ifdef CONFIG_CPU_R4000_WORKAROUNDS +#define R4000_WAR 1 +#else +#define R4000_WAR 0 +#endif + +/* + * Work around certain R4400 CPU errata (as implemented by GCC): + * + * - A double-word or a variable shift may give an incorrect result + * if executed immediately after starting an integer division: + * "MIPS R4400MC Errata, Processor Revision 1.0", erratum #10 + * "MIPS R4400MC Errata, Processor Revision 2.0 & 3.0", erratum #4 + */ +#ifdef CONFIG_CPU_R4400_WORKAROUNDS +#define R4400_WAR 1 +#else +#define R4400_WAR 0 +#endif + +/* + * Work around the "daddi" and "daddiu" CPU errata: + * + * - The `daddi' instruction fails to trap on overflow. + * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", + * erratum #23 + * + * - The `daddiu' instruction can produce an incorrect result. + * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", + * erratum #41 + * "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum + * #15 + * "MIPS R4400PC/SC Errata, Processor Revision 1.0", erratum #7 + * "MIPS R4400MC Errata, Processor Revision 1.0", erratum #5 + */ +#ifdef CONFIG_CPU_DADDI_WORKAROUNDS +#define DADDI_WAR 1 +#else +#define DADDI_WAR 0 +#endif + +/* + * Another R4600 erratum. Due to the lack of errata information the exact + * technical details aren't known. I've experimentally found that disabling + * interrupts during indexed I-cache flushes seems to be sufficient to deal + * with the issue. + */ +#ifndef R4600_V1_INDEX_ICACHEOP_WAR +#error Check setting of R4600_V1_INDEX_ICACHEOP_WAR for your platform +#endif + +/* + * Pleasures of the R4600 V1.x. Cite from the IDT R4600 V1.7 errata: + * + * 18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D, + * Hit_Invalidate_D and Create_Dirty_Excl_D should only be + * executed if there is no other dcache activity. If the dcache is + * accessed for another instruction immeidately preceding when these + * cache instructions are executing, it is possible that the dcache + * tag match outputs used by these cache instructions will be + * incorrect. These cache instructions should be preceded by at least + * four instructions that are not any kind of load or store + * instruction. + * + * This is not allowed: lw + * nop + * nop + * nop + * cache Hit_Writeback_Invalidate_D + * + * This is allowed: lw + * nop + * nop + * nop + * nop + * cache Hit_Writeback_Invalidate_D + */ +#ifndef R4600_V1_HIT_CACHEOP_WAR +#error Check setting of R4600_V1_HIT_CACHEOP_WAR for your platform +#endif + + +/* + * Writeback and invalidate the primary cache dcache before DMA. + * + * R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D, + * Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only + * operate correctly if the internal data cache refill buffer is empty. These + * CACHE instructions should be separated from any potential data cache miss + * by a load instruction to an uncached address to empty the response buffer." + * (Revision 2.0 device errata from IDT available on http://www.idt.com/ + * in .pdf format.) + */ +#ifndef R4600_V2_HIT_CACHEOP_WAR +#error Check setting of R4600_V2_HIT_CACHEOP_WAR for your platform +#endif + +/* + * When an interrupt happens on a CP0 register read instruction, CPU may + * lock up or read corrupted values of CP0 registers after it enters + * the exception handler. + * + * This workaround makes sure that we read a "safe" CP0 register as the + * first thing in the exception handler, which breaks one of the + * pre-conditions for this problem. + */ +#ifndef R5432_CP0_INTERRUPT_WAR +#error Check setting of R5432_CP0_INTERRUPT_WAR for your platform +#endif + +/* + * Workaround for the Sibyte M3 errata the text of which can be found at + * + * http://sibyte.broadcom.com/hw/bcm1250/docs/pass2errata.txt + * + * This will enable the use of a special TLB refill handler which does a + * consistency check on the information in c0_badvaddr and c0_entryhi and + * will just return and take the exception again if the information was + * found to be inconsistent. + */ +#ifndef BCM1250_M3_WAR +#error Check setting of BCM1250_M3_WAR for your platform +#endif + +/* + * This is a DUART workaround related to glitches around register accesses + */ +#ifndef SIBYTE_1956_WAR +#error Check setting of SIBYTE_1956_WAR for your platform +#endif + +/* + * Fill buffers not flushed on CACHE instructions + * + * Hit_Invalidate_I cacheops invalidate an icache line but the refill + * for that line can get stale data from the fill buffer instead of + * accessing memory if the previous icache miss was also to that line. + * + * Workaround: generate an icache refill from a different line + * + * Affects: + * MIPS 4K RTL revision <3.0, PRID revision <4 + */ +#ifndef MIPS4K_ICACHE_REFILL_WAR +#error Check setting of MIPS4K_ICACHE_REFILL_WAR for your platform +#endif + +/* + * Missing implicit forced flush of evictions caused by CACHE + * instruction + * + * Evictions caused by a CACHE instructions are not forced on to the + * bus. The BIU gives higher priority to fetches than to the data from + * the eviction buffer and no collision detection is performed between + * fetches and pending data from the eviction buffer. + * + * Workaround: Execute a SYNC instruction after the cache instruction + * + * Affects: + * MIPS 5Kc,5Kf RTL revision <2.3, PRID revision <8 + * MIPS 20Kc RTL revision <4.0, PRID revision <? + */ +#ifndef MIPS_CACHE_SYNC_WAR +#error Check setting of MIPS_CACHE_SYNC_WAR for your platform +#endif + +/* + * From TX49/H2 manual: "If the instruction (i.e. CACHE) is issued for + * the line which this instruction itself exists, the following + * operation is not guaranteed." + * + * Workaround: do two phase flushing for Index_Invalidate_I + */ +#ifndef TX49XX_ICACHE_INDEX_INV_WAR +#error Check setting of TX49XX_ICACHE_INDEX_INV_WAR for your platform +#endif + +/* + * On the RM9000 there is a problem which makes the CreateDirtyExclusive + * eache operation unusable on SMP systems. + */ +#ifndef RM9000_CDEX_SMP_WAR +#error Check setting of RM9000_CDEX_SMP_WAR for your platform +#endif + +/* + * The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra + * opposes it being called that) where invalid instructions in the same + * I-cache line worth of instructions being fetched may case spurious + * exceptions. + */ +#ifndef ICACHE_REFILLS_WORKAROUND_WAR +#error Check setting of ICACHE_REFILLS_WORKAROUND_WAR for your platform +#endif + +/* + * On the R10000 upto version 2.6 (not sure about 2.7) there is a bug that + * may cause ll / sc and lld / scd sequences to execute non-atomically. + */ +#ifndef R10000_LLSC_WAR +#error Check setting of R10000_LLSC_WAR for your platform +#endif + +/* + * 34K core erratum: "Problems Executing the TLBR Instruction" + */ +#ifndef MIPS34K_MISSED_ITLB_WAR +#error Check setting of MIPS34K_MISSED_ITLB_WAR for your platform +#endif + +#endif /* _ASM_WAR_H */ diff --git a/arch/mips/include/asm/watch.h b/arch/mips/include/asm/watch.h new file mode 100644 index 000000000000..20126ec79359 --- /dev/null +++ b/arch/mips/include/asm/watch.h @@ -0,0 +1,32 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 David Daney + */ +#ifndef _ASM_WATCH_H +#define _ASM_WATCH_H + +#include <linux/bitops.h> + +#include <asm/mipsregs.h> + +void mips_install_watch_registers(void); +void mips_read_watch_registers(void); +void mips_clear_watch_registers(void); +void mips_probe_watch_registers(struct cpuinfo_mips *c); + +#ifdef CONFIG_HARDWARE_WATCHPOINTS +#define __restore_watch() do { \ + if (unlikely(test_bit(TIF_LOAD_WATCH, \ + ¤t_thread_info()->flags))) { \ + mips_install_watch_registers(); \ + } \ +} while (0) + +#else +#define __restore_watch() do {} while (0) +#endif + +#endif /* _ASM_WATCH_H */ diff --git a/arch/mips/include/asm/wbflush.h b/arch/mips/include/asm/wbflush.h new file mode 100644 index 000000000000..eadc0ac47e24 --- /dev/null +++ b/arch/mips/include/asm/wbflush.h @@ -0,0 +1,34 @@ +/* + * Header file for using the wbflush routine + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1998 Harald Koerfgen + * Copyright (C) 2002 Maciej W. Rozycki + */ +#ifndef _ASM_WBFLUSH_H +#define _ASM_WBFLUSH_H + + +#ifdef CONFIG_CPU_HAS_WB + +extern void (*__wbflush)(void); +extern void wbflush_setup(void); + +#define wbflush() \ + do { \ + __sync(); \ + __wbflush(); \ + } while (0) + +#else /* !CONFIG_CPU_HAS_WB */ + +#define wbflush_setup() do { } while (0) + +#define wbflush() fast_iob() + +#endif /* !CONFIG_CPU_HAS_WB */ + +#endif /* _ASM_WBFLUSH_H */ diff --git a/arch/mips/include/asm/xor.h b/arch/mips/include/asm/xor.h new file mode 100644 index 000000000000..c82eb12a5b18 --- /dev/null +++ b/arch/mips/include/asm/xor.h @@ -0,0 +1 @@ +#include <asm-generic/xor.h> diff --git a/arch/mips/include/asm/xtalk/xtalk.h b/arch/mips/include/asm/xtalk/xtalk.h new file mode 100644 index 000000000000..79bac882a739 --- /dev/null +++ b/arch/mips/include/asm/xtalk/xtalk.h @@ -0,0 +1,52 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * xtalk.h -- platform-independent crosstalk interface, derived from + * IRIX <sys/PCI/bridge.h>, revision 1.38. + * + * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc. + * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_XTALK_XTALK_H +#define _ASM_XTALK_XTALK_H + +#ifndef __ASSEMBLY__ +/* + * User-level device driver visible types + */ +typedef char xwidgetnum_t; /* xtalk widget number (0..15) */ + +#define XWIDGET_NONE -1 + +typedef int xwidget_part_num_t; /* xtalk widget part number */ + +#define XWIDGET_PART_NUM_NONE -1 + +typedef int xwidget_rev_num_t; /* xtalk widget revision number */ + +#define XWIDGET_REV_NUM_NONE -1 + +typedef int xwidget_mfg_num_t; /* xtalk widget manufacturing ID */ + +#define XWIDGET_MFG_NUM_NONE -1 + +typedef struct xtalk_piomap_s *xtalk_piomap_t; + +/* It is often convenient to fold the XIO target port + * number into the XIO address. + */ +#define XIO_NOWHERE (0xFFFFFFFFFFFFFFFFull) +#define XIO_ADDR_BITS (0x0000FFFFFFFFFFFFull) +#define XIO_PORT_BITS (0xF000000000000000ull) +#define XIO_PORT_SHIFT (60) + +#define XIO_PACKED(x) (((x)&XIO_PORT_BITS) != 0) +#define XIO_ADDR(x) ((x)&XIO_ADDR_BITS) +#define XIO_PORT(x) ((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT)) +#define XIO_PACK(p, o) ((((uint64_t)(p))<<XIO_PORT_SHIFT) | ((o)&XIO_ADDR_BITS)) + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_XTALK_XTALK_H */ diff --git a/arch/mips/include/asm/xtalk/xwidget.h b/arch/mips/include/asm/xtalk/xwidget.h new file mode 100644 index 000000000000..b4a13d7405ee --- /dev/null +++ b/arch/mips/include/asm/xtalk/xwidget.h @@ -0,0 +1,167 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * xwidget.h - generic crosstalk widget header file, derived from IRIX + * <sys/xtalk/xtalkwidget.h>, revision 1.32. + * + * Copyright (C) 1996, 1999 Silcon Graphics, Inc. + * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_XTALK_XWIDGET_H +#define _ASM_XTALK_XWIDGET_H + +#include <linux/types.h> +#include <asm/xtalk/xtalk.h> + +#define WIDGET_ID 0x04 +#define WIDGET_STATUS 0x0c +#define WIDGET_ERR_UPPER_ADDR 0x14 +#define WIDGET_ERR_LOWER_ADDR 0x1c +#define WIDGET_CONTROL 0x24 +#define WIDGET_REQ_TIMEOUT 0x2c +#define WIDGET_INTDEST_UPPER_ADDR 0x34 +#define WIDGET_INTDEST_LOWER_ADDR 0x3c +#define WIDGET_ERR_CMD_WORD 0x44 +#define WIDGET_LLP_CFG 0x4c +#define WIDGET_TFLUSH 0x54 + +/* WIDGET_ID */ +#define WIDGET_REV_NUM 0xf0000000 +#define WIDGET_PART_NUM 0x0ffff000 +#define WIDGET_MFG_NUM 0x00000ffe +#define WIDGET_REV_NUM_SHFT 28 +#define WIDGET_PART_NUM_SHFT 12 +#define WIDGET_MFG_NUM_SHFT 1 + +#define XWIDGET_PART_NUM(widgetid) (((widgetid) & WIDGET_PART_NUM) >> WIDGET_PART_NUM_SHFT) +#define XWIDGET_REV_NUM(widgetid) (((widgetid) & WIDGET_REV_NUM) >> WIDGET_REV_NUM_SHFT) +#define XWIDGET_MFG_NUM(widgetid) (((widgetid) & WIDGET_MFG_NUM) >> WIDGET_MFG_NUM_SHFT) + +/* WIDGET_STATUS */ +#define WIDGET_LLP_REC_CNT 0xff000000 +#define WIDGET_LLP_TX_CNT 0x00ff0000 +#define WIDGET_PENDING 0x0000001f + +/* WIDGET_ERR_UPPER_ADDR */ +#define WIDGET_ERR_UPPER_ADDR_ONLY 0x0000ffff + +/* WIDGET_CONTROL */ +#define WIDGET_F_BAD_PKT 0x00010000 +#define WIDGET_LLP_XBAR_CRD 0x0000f000 +#define WIDGET_LLP_XBAR_CRD_SHFT 12 +#define WIDGET_CLR_RLLP_CNT 0x00000800 +#define WIDGET_CLR_TLLP_CNT 0x00000400 +#define WIDGET_SYS_END 0x00000200 +#define WIDGET_MAX_TRANS 0x000001f0 +#define WIDGET_WIDGET_ID 0x0000000f + +/* WIDGET_INTDEST_UPPER_ADDR */ +#define WIDGET_INT_VECTOR 0xff000000 +#define WIDGET_INT_VECTOR_SHFT 24 +#define WIDGET_TARGET_ID 0x000f0000 +#define WIDGET_TARGET_ID_SHFT 16 +#define WIDGET_UPP_ADDR 0x0000ffff + +/* WIDGET_ERR_CMD_WORD */ +#define WIDGET_DIDN 0xf0000000 +#define WIDGET_SIDN 0x0f000000 +#define WIDGET_PACTYP 0x00f00000 +#define WIDGET_TNUM 0x000f8000 +#define WIDGET_COHERENT 0x00004000 +#define WIDGET_DS 0x00003000 +#define WIDGET_GBR 0x00000800 +#define WIDGET_VBPM 0x00000400 +#define WIDGET_ERROR 0x00000200 +#define WIDGET_BARRIER 0x00000100 + +/* WIDGET_LLP_CFG */ +#define WIDGET_LLP_MAXRETRY 0x03ff0000 +#define WIDGET_LLP_MAXRETRY_SHFT 16 +#define WIDGET_LLP_NULLTIMEOUT 0x0000fc00 +#define WIDGET_LLP_NULLTIMEOUT_SHFT 10 +#define WIDGET_LLP_MAXBURST 0x000003ff +#define WIDGET_LLP_MAXBURST_SHFT 0 + +/* + * according to the crosstalk spec, only 32-bits access to the widget + * configuration registers is allowed. some widgets may allow 64-bits + * access but software should not depend on it. registers beyond the + * widget target flush register are widget dependent thus will not be + * defined here + */ +#ifndef __ASSEMBLY__ +typedef u32 widgetreg_t; + +/* widget configuration registers */ +typedef volatile struct widget_cfg { + widgetreg_t w_pad_0; /* 0x00 */ + widgetreg_t w_id; /* 0x04 */ + widgetreg_t w_pad_1; /* 0x08 */ + widgetreg_t w_status; /* 0x0c */ + widgetreg_t w_pad_2; /* 0x10 */ + widgetreg_t w_err_upper_addr; /* 0x14 */ + widgetreg_t w_pad_3; /* 0x18 */ + widgetreg_t w_err_lower_addr; /* 0x1c */ + widgetreg_t w_pad_4; /* 0x20 */ + widgetreg_t w_control; /* 0x24 */ + widgetreg_t w_pad_5; /* 0x28 */ + widgetreg_t w_req_timeout; /* 0x2c */ + widgetreg_t w_pad_6; /* 0x30 */ + widgetreg_t w_intdest_upper_addr; /* 0x34 */ + widgetreg_t w_pad_7; /* 0x38 */ + widgetreg_t w_intdest_lower_addr; /* 0x3c */ + widgetreg_t w_pad_8; /* 0x40 */ + widgetreg_t w_err_cmd_word; /* 0x44 */ + widgetreg_t w_pad_9; /* 0x48 */ + widgetreg_t w_llp_cfg; /* 0x4c */ + widgetreg_t w_pad_10; /* 0x50 */ + widgetreg_t w_tflush; /* 0x54 */ +} widget_cfg_t; + +typedef struct { + unsigned didn:4; + unsigned sidn:4; + unsigned pactyp:4; + unsigned tnum:5; + unsigned ct:1; + unsigned ds:2; + unsigned gbr:1; + unsigned vbpm:1; + unsigned error:1; + unsigned bo:1; + unsigned other:8; +} w_err_cmd_word_f; + +typedef union { + widgetreg_t r; + w_err_cmd_word_f f; +} w_err_cmd_word_u; + +typedef struct xwidget_info_s *xwidget_info_t; + +/* + * Crosstalk Widget Hardware Identification, as defined in the Crosstalk spec. + */ +typedef struct xwidget_hwid_s { + xwidget_part_num_t part_num; + xwidget_rev_num_t rev_num; + xwidget_mfg_num_t mfg_num; +} *xwidget_hwid_t; + + +/* + * Returns 1 if a driver that handles devices described by hwid1 is able + * to manage a device with hardwareid hwid2. NOTE: We don't check rev + * numbers at all. + */ +#define XWIDGET_HARDWARE_ID_MATCH(hwid1, hwid2) \ + (((hwid1)->part_num == (hwid2)->part_num) && \ + (((hwid1)->mfg_num == XWIDGET_MFG_NUM_NONE) || \ + ((hwid2)->mfg_num == XWIDGET_MFG_NUM_NONE) || \ + ((hwid1)->mfg_num == (hwid2)->mfg_num))) + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_XTALK_XWIDGET_H */ diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 706f93974797..d9da7112aaf8 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -6,10 +6,11 @@ extra-y := head.o init_task.o vmlinux.lds obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ ptrace.o reset.o setup.o signal.o syscall.o \ - time.o topology.o traps.o unaligned.o + time.o topology.o traps.o unaligned.o watch.o obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o +obj-$(CONFIG_MIPS_MT_SMTC) += cevt-smtc.o obj-$(CONFIG_CEVT_DS1287) += cevt-ds1287.o obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 24a2d907aa0d..4a4c59f2737a 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -12,6 +12,14 @@ #include <asm/smtc_ipi.h> #include <asm/time.h> +#include <asm/cevt-r4k.h> + +/* + * The SMTC Kernel for the 34K, 1004K, et. al. replaces several + * of these routines with SMTC-specific variants. + */ + +#ifndef CONFIG_MIPS_MT_SMTC static int mips_next_event(unsigned long delta, struct clock_event_device *evt) @@ -19,60 +27,27 @@ static int mips_next_event(unsigned long delta, unsigned int cnt; int res; -#ifdef CONFIG_MIPS_MT_SMTC - { - unsigned long flags, vpflags; - local_irq_save(flags); - vpflags = dvpe(); -#endif cnt = read_c0_count(); cnt += delta; write_c0_compare(cnt); res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; -#ifdef CONFIG_MIPS_MT_SMTC - evpe(vpflags); - local_irq_restore(flags); - } -#endif return res; } -static void mips_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +#endif /* CONFIG_MIPS_MT_SMTC */ + +void mips_set_clock_mode(enum clock_event_mode mode, + struct clock_event_device *evt) { /* Nothing to do ... */ } -static DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device); -static int cp0_timer_irq_installed; +DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device); +int cp0_timer_irq_installed; -/* - * Timer ack for an R4k-compatible timer of a known frequency. - */ -static void c0_timer_ack(void) -{ - write_c0_compare(read_c0_compare()); -} +#ifndef CONFIG_MIPS_MT_SMTC -/* - * Possibly handle a performance counter interrupt. - * Return true if the timer interrupt should not be checked - */ -static inline int handle_perf_irq(int r2) -{ - /* - * The performance counter overflow interrupt may be shared with the - * timer interrupt (cp0_perfcount_irq < 0). If it is and a - * performance counter has overflowed (perf_irq() == IRQ_HANDLED) - * and we can't reliably determine if a counter interrupt has also - * happened (!r2) then don't check for a timer interrupt. - */ - return (cp0_perfcount_irq < 0) && - perf_irq() == IRQ_HANDLED && - !r2; -} - -static irqreturn_t c0_compare_interrupt(int irq, void *dev_id) +irqreturn_t c0_compare_interrupt(int irq, void *dev_id) { const int r2 = cpu_has_mips_r2; struct clock_event_device *cd; @@ -93,12 +68,8 @@ static irqreturn_t c0_compare_interrupt(int irq, void *dev_id) * interrupt. Being the paranoiacs we are we check anyway. */ if (!r2 || (read_c0_cause() & (1 << 30))) { - c0_timer_ack(); -#ifdef CONFIG_MIPS_MT_SMTC - if (cpu_data[cpu].vpe_id) - goto out; - cpu = 0; -#endif + /* Clear Count/Compare Interrupt */ + write_c0_compare(read_c0_compare()); cd = &per_cpu(mips_clockevent_device, cpu); cd->event_handler(cd); } @@ -107,65 +78,16 @@ out: return IRQ_HANDLED; } -static struct irqaction c0_compare_irqaction = { +#endif /* Not CONFIG_MIPS_MT_SMTC */ + +struct irqaction c0_compare_irqaction = { .handler = c0_compare_interrupt, -#ifdef CONFIG_MIPS_MT_SMTC - .flags = IRQF_DISABLED, -#else .flags = IRQF_DISABLED | IRQF_PERCPU, -#endif .name = "timer", }; -#ifdef CONFIG_MIPS_MT_SMTC -DEFINE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device); - -static void smtc_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ -} - -static void mips_broadcast(cpumask_t mask) -{ - unsigned int cpu; - - for_each_cpu_mask(cpu, mask) - smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0); -} - -static void setup_smtc_dummy_clockevent_device(void) -{ - //uint64_t mips_freq = mips_hpt_^frequency; - unsigned int cpu = smp_processor_id(); - struct clock_event_device *cd; - cd = &per_cpu(smtc_dummy_clockevent_device, cpu); - - cd->name = "SMTC"; - cd->features = CLOCK_EVT_FEAT_DUMMY; - - /* Calculate the min / max delta */ - cd->mult = 0; //div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32); - cd->shift = 0; //32; - cd->max_delta_ns = 0; //clockevent_delta2ns(0x7fffffff, cd); - cd->min_delta_ns = 0; //clockevent_delta2ns(0x30, cd); - - cd->rating = 200; - cd->irq = 17; //-1; -// if (cpu) -// cd->cpumask = CPU_MASK_ALL; // cpumask_of_cpu(cpu); -// else - cd->cpumask = cpumask_of_cpu(cpu); - - cd->set_mode = smtc_set_mode; - - cd->broadcast = mips_broadcast; - - clockevents_register_device(cd); -} -#endif - -static void mips_event_handler(struct clock_event_device *dev) +void mips_event_handler(struct clock_event_device *dev) { } @@ -177,7 +99,23 @@ static int c0_compare_int_pending(void) return (read_c0_cause() >> cp0_compare_irq) & 0x100; } -static int c0_compare_int_usable(void) +/* + * Compare interrupt can be routed and latched outside the core, + * so a single execution hazard barrier may not be enough to give + * it time to clear as seen in the Cause register. 4 time the + * pipeline depth seems reasonably conservative, and empirically + * works better in configurations with high CPU/bus clock ratios. + */ + +#define compare_change_hazard() \ + do { \ + irq_disable_hazard(); \ + irq_disable_hazard(); \ + irq_disable_hazard(); \ + irq_disable_hazard(); \ + } while (0) + +int c0_compare_int_usable(void) { unsigned int delta; unsigned int cnt; @@ -187,7 +125,7 @@ static int c0_compare_int_usable(void) */ if (c0_compare_int_pending()) { write_c0_compare(read_c0_count()); - irq_disable_hazard(); + compare_change_hazard(); if (c0_compare_int_pending()) return 0; } @@ -196,7 +134,7 @@ static int c0_compare_int_usable(void) cnt = read_c0_count(); cnt += delta; write_c0_compare(cnt); - irq_disable_hazard(); + compare_change_hazard(); if ((int)(read_c0_count() - cnt) < 0) break; /* increase delta if the timer was already expired */ @@ -205,11 +143,12 @@ static int c0_compare_int_usable(void) while ((int)(read_c0_count() - cnt) <= 0) ; /* Wait for expiry */ + compare_change_hazard(); if (!c0_compare_int_pending()) return 0; write_c0_compare(read_c0_count()); - irq_disable_hazard(); + compare_change_hazard(); if (c0_compare_int_pending()) return 0; @@ -219,6 +158,8 @@ static int c0_compare_int_usable(void) return 1; } +#ifndef CONFIG_MIPS_MT_SMTC + int __cpuinit mips_clockevent_init(void) { uint64_t mips_freq = mips_hpt_frequency; @@ -229,17 +170,6 @@ int __cpuinit mips_clockevent_init(void) if (!cpu_has_counter || !mips_hpt_frequency) return -ENXIO; -#ifdef CONFIG_MIPS_MT_SMTC - setup_smtc_dummy_clockevent_device(); - - /* - * On SMTC we only register VPE0's compare interrupt as clockevent - * device. - */ - if (cpu) - return 0; -#endif - if (!c0_compare_int_usable()) return -ENXIO; @@ -265,13 +195,9 @@ int __cpuinit mips_clockevent_init(void) cd->rating = 300; cd->irq = irq; -#ifdef CONFIG_MIPS_MT_SMTC - cd->cpumask = CPU_MASK_ALL; -#else cd->cpumask = cpumask_of_cpu(cpu); -#endif cd->set_next_event = mips_next_event; - cd->set_mode = mips_set_mode; + cd->set_mode = mips_set_clock_mode; cd->event_handler = mips_event_handler; clockevents_register_device(cd); @@ -281,12 +207,9 @@ int __cpuinit mips_clockevent_init(void) cp0_timer_irq_installed = 1; -#ifdef CONFIG_MIPS_MT_SMTC -#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq) - setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT); -#else setup_irq(irq, &c0_compare_irqaction); -#endif return 0; } + +#endif /* Not CONFIG_MIPS_MT_SMTC */ diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c new file mode 100644 index 000000000000..5162fe4b5952 --- /dev/null +++ b/arch/mips/kernel/cevt-smtc.c @@ -0,0 +1,321 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 MIPS Technologies, Inc. + * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org> + * Copyright (C) 2008 Kevin D. Kissell, Paralogos sarl + */ +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/percpu.h> + +#include <asm/smtc_ipi.h> +#include <asm/time.h> +#include <asm/cevt-r4k.h> + +/* + * Variant clock event timer support for SMTC on MIPS 34K, 1004K + * or other MIPS MT cores. + * + * Notes on SMTC Support: + * + * SMTC has multiple microthread TCs pretending to be Linux CPUs. + * But there's only one Count/Compare pair per VPE, and Compare + * interrupts are taken opportunisitically by available TCs + * bound to the VPE with the Count register. The new timer + * framework provides for global broadcasts, but we really + * want VPE-level multicasts for best behavior. So instead + * of invoking the high-level clock-event broadcast code, + * this version of SMTC support uses the historical SMTC + * multicast mechanisms "under the hood", appearing to the + * generic clock layer as if the interrupts are per-CPU. + * + * The approach taken here is to maintain a set of NR_CPUS + * virtual timers, and track which "CPU" needs to be alerted + * at each event. + * + * It's unlikely that we'll see a MIPS MT core with more than + * 2 VPEs, but we *know* that we won't need to handle more + * VPEs than we have "CPUs". So NCPUs arrays of NCPUs elements + * is always going to be overkill, but always going to be enough. + */ + +unsigned long smtc_nexttime[NR_CPUS][NR_CPUS]; +static int smtc_nextinvpe[NR_CPUS]; + +/* + * Timestamps stored are absolute values to be programmed + * into Count register. Valid timestamps will never be zero. + * If a Zero Count value is actually calculated, it is converted + * to be a 1, which will introduce 1 or two CPU cycles of error + * roughly once every four billion events, which at 1000 HZ means + * about once every 50 days. If that's actually a problem, one + * could alternate squashing 0 to 1 and to -1. + */ + +#define MAKEVALID(x) (((x) == 0L) ? 1L : (x)) +#define ISVALID(x) ((x) != 0L) + +/* + * Time comparison is subtle, as it's really truncated + * modular arithmetic. + */ + +#define IS_SOONER(a, b, reference) \ + (((a) - (unsigned long)(reference)) < ((b) - (unsigned long)(reference))) + +/* + * CATCHUP_INCREMENT, used when the function falls behind the counter. + * Could be an increasing function instead of a constant; + */ + +#define CATCHUP_INCREMENT 64 + +static int mips_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + unsigned long flags; + unsigned int mtflags; + unsigned long timestamp, reference, previous; + unsigned long nextcomp = 0L; + int vpe = current_cpu_data.vpe_id; + int cpu = smp_processor_id(); + local_irq_save(flags); + mtflags = dmt(); + + /* + * Maintain the per-TC virtual timer + * and program the per-VPE shared Count register + * as appropriate here... + */ + reference = (unsigned long)read_c0_count(); + timestamp = MAKEVALID(reference + delta); + /* + * To really model the clock, we have to catch the case + * where the current next-in-VPE timestamp is the old + * timestamp for the calling CPE, but the new value is + * in fact later. In that case, we have to do a full + * scan and discover the new next-in-VPE CPU id and + * timestamp. + */ + previous = smtc_nexttime[vpe][cpu]; + if (cpu == smtc_nextinvpe[vpe] && ISVALID(previous) + && IS_SOONER(previous, timestamp, reference)) { + int i; + int soonest = cpu; + + /* + * Update timestamp array here, so that new + * value gets considered along with those of + * other virtual CPUs on the VPE. + */ + smtc_nexttime[vpe][cpu] = timestamp; + for_each_online_cpu(i) { + if (ISVALID(smtc_nexttime[vpe][i]) + && IS_SOONER(smtc_nexttime[vpe][i], + smtc_nexttime[vpe][soonest], reference)) { + soonest = i; + } + } + smtc_nextinvpe[vpe] = soonest; + nextcomp = smtc_nexttime[vpe][soonest]; + /* + * Otherwise, we don't have to process the whole array rank, + * we just have to see if the event horizon has gotten closer. + */ + } else { + if (!ISVALID(smtc_nexttime[vpe][smtc_nextinvpe[vpe]]) || + IS_SOONER(timestamp, + smtc_nexttime[vpe][smtc_nextinvpe[vpe]], reference)) { + smtc_nextinvpe[vpe] = cpu; + nextcomp = timestamp; + } + /* + * Since next-in-VPE may me the same as the executing + * virtual CPU, we update the array *after* checking + * its value. + */ + smtc_nexttime[vpe][cpu] = timestamp; + } + + /* + * It may be that, in fact, we don't need to update Compare, + * but if we do, we want to make sure we didn't fall into + * a crack just behind Count. + */ + if (ISVALID(nextcomp)) { + write_c0_compare(nextcomp); + ehb(); + /* + * We never return an error, we just make sure + * that we trigger the handlers as quickly as + * we can if we fell behind. + */ + while ((nextcomp - (unsigned long)read_c0_count()) + > (unsigned long)LONG_MAX) { + nextcomp += CATCHUP_INCREMENT; + write_c0_compare(nextcomp); + ehb(); + } + } + emt(mtflags); + local_irq_restore(flags); + return 0; +} + + +void smtc_distribute_timer(int vpe) +{ + unsigned long flags; + unsigned int mtflags; + int cpu; + struct clock_event_device *cd; + unsigned long nextstamp = 0L; + unsigned long reference; + + +repeat: + for_each_online_cpu(cpu) { + /* + * Find virtual CPUs within the current VPE who have + * unserviced timer requests whose time is now past. + */ + local_irq_save(flags); + mtflags = dmt(); + if (cpu_data[cpu].vpe_id == vpe && + ISVALID(smtc_nexttime[vpe][cpu])) { + reference = (unsigned long)read_c0_count(); + if ((smtc_nexttime[vpe][cpu] - reference) + > (unsigned long)LONG_MAX) { + smtc_nexttime[vpe][cpu] = 0L; + emt(mtflags); + local_irq_restore(flags); + /* + * We don't send IPIs to ourself. + */ + if (cpu != smp_processor_id()) { + smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0); + } else { + cd = &per_cpu(mips_clockevent_device, cpu); + cd->event_handler(cd); + } + } else { + /* Local to VPE but Valid Time not yet reached. */ + if (!ISVALID(nextstamp) || + IS_SOONER(smtc_nexttime[vpe][cpu], nextstamp, + reference)) { + smtc_nextinvpe[vpe] = cpu; + nextstamp = smtc_nexttime[vpe][cpu]; + } + emt(mtflags); + local_irq_restore(flags); + } + } else { + emt(mtflags); + local_irq_restore(flags); + + } + } + /* Reprogram for interrupt at next soonest timestamp for VPE */ + if (ISVALID(nextstamp)) { + write_c0_compare(nextstamp); + ehb(); + if ((nextstamp - (unsigned long)read_c0_count()) + > (unsigned long)LONG_MAX) + goto repeat; + } +} + + +irqreturn_t c0_compare_interrupt(int irq, void *dev_id) +{ + int cpu = smp_processor_id(); + + /* If we're running SMTC, we've got MIPS MT and therefore MIPS32R2 */ + handle_perf_irq(1); + + if (read_c0_cause() & (1 << 30)) { + /* Clear Count/Compare Interrupt */ + write_c0_compare(read_c0_compare()); + smtc_distribute_timer(cpu_data[cpu].vpe_id); + } + return IRQ_HANDLED; +} + + +int __cpuinit mips_clockevent_init(void) +{ + uint64_t mips_freq = mips_hpt_frequency; + unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd; + unsigned int irq; + int i; + int j; + + if (!cpu_has_counter || !mips_hpt_frequency) + return -ENXIO; + if (cpu == 0) { + for (i = 0; i < num_possible_cpus(); i++) { + smtc_nextinvpe[i] = 0; + for (j = 0; j < num_possible_cpus(); j++) + smtc_nexttime[i][j] = 0L; + } + /* + * SMTC also can't have the usablility test + * run by secondary TCs once Compare is in use. + */ + if (!c0_compare_int_usable()) + return -ENXIO; + } + + /* + * With vectored interrupts things are getting platform specific. + * get_c0_compare_int is a hook to allow a platform to return the + * interrupt number of it's liking. + */ + irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; + if (get_c0_compare_int) + irq = get_c0_compare_int(); + + cd = &per_cpu(mips_clockevent_device, cpu); + + cd->name = "MIPS"; + cd->features = CLOCK_EVT_FEAT_ONESHOT; + + /* Calculate the min / max delta */ + cd->mult = div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32); + cd->shift = 32; + cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); + cd->min_delta_ns = clockevent_delta2ns(0x300, cd); + + cd->rating = 300; + cd->irq = irq; + cd->cpumask = cpumask_of_cpu(cpu); + cd->set_next_event = mips_next_event; + cd->set_mode = mips_set_clock_mode; + cd->event_handler = mips_event_handler; + + clockevents_register_device(cd); + + /* + * On SMTC we only want to do the data structure + * initialization and IRQ setup once. + */ + if (cpu) + return 0; + /* + * And we need the hwmask associated with the c0_compare + * vector to be initialized. + */ + irq_hwmask[irq] = (0x100 << cp0_compare_irq); + if (cp0_timer_irq_installed) + return 0; + + cp0_timer_irq_installed = 1; + + setup_irq(irq, &c0_compare_irqaction); + + return 0; +} diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 335a6ae3d594..0cf15457ecac 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -21,6 +21,7 @@ #include <asm/fpu.h> #include <asm/mipsregs.h> #include <asm/system.h> +#include <asm/watch.h> /* * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, @@ -45,18 +46,7 @@ static void r39xx_wait(void) local_irq_enable(); } -/* - * There is a race when WAIT instruction executed with interrupt - * enabled. - * But it is implementation-dependent wheter the pipelie restarts when - * a non-enabled interrupt is requested. - */ -static void r4k_wait(void) -{ - __asm__(" .set mips3 \n" - " wait \n" - " .set mips0 \n"); -} +extern void r4k_wait(void); /* * This variant is preferable as it allows testing need_resched and going to @@ -65,14 +55,18 @@ static void r4k_wait(void) * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes * using this version a gamble. */ -static void r4k_wait_irqoff(void) +void r4k_wait_irqoff(void) { local_irq_disable(); if (!need_resched()) - __asm__(" .set mips3 \n" + __asm__(" .set push \n" + " .set mips3 \n" " wait \n" - " .set mips0 \n"); + " .set pop \n"); local_irq_enable(); + __asm__(" .globl __pastwait \n" + "__pastwait: \n"); + return; } /* @@ -128,7 +122,7 @@ static int __init wait_disable(char *s) __setup("nowait", wait_disable); -static inline void check_wait(void) +void __init check_wait(void) { struct cpuinfo_mips *c = ¤t_cpu_data; @@ -242,7 +236,6 @@ static inline void check_errata(void) void __init check_bugs32(void) { - check_wait(); check_errata(); } @@ -685,6 +678,7 @@ static inline void spram_config(void) {} static inline void cpu_probe_mips(struct cpuinfo_mips *c) { decode_configs(c); + mips_probe_watch_registers(c); switch (c->processor_id & 0xff00) { case PRID_IMP_4KC: c->cputype = CPU_4KC; diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index e29598ae939d..ffa331029e08 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -79,11 +79,6 @@ FEXPORT(syscall_exit) FEXPORT(restore_all) # restore full frame #ifdef CONFIG_MIPS_MT_SMTC -/* Detect and execute deferred IPI "interrupts" */ - LONG_L s0, TI_REGS($28) - LONG_S sp, TI_REGS($28) - jal deferred_smtc_ipi - LONG_S s0, TI_REGS($28) #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP /* Re-arm any temporarily masked interrupts not explicitly "acked" */ mfc0 v0, CP0_TCSTATUS @@ -112,6 +107,11 @@ FEXPORT(restore_all) # restore full frame xor t0, t0, t3 mtc0 t0, CP0_TCCONTEXT #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */ +/* Detect and execute deferred IPI "interrupts" */ + LONG_L s0, TI_REGS($28) + LONG_S sp, TI_REGS($28) + jal deferred_smtc_ipi + LONG_S s0, TI_REGS($28) #endif /* CONFIG_MIPS_MT_SMTC */ .set noat RESTORE_TEMP diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index c6ada98ee042..757d48f0d80f 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -20,6 +20,7 @@ #include <asm/stackframe.h> #include <asm/war.h> #include <asm/page.h> +#include <asm/thread_info.h> #define PANIC_PIC(msg) \ .set push; \ @@ -126,7 +127,42 @@ handle_vcei: __FINIT + .align 5 /* 32 byte rollback region */ +LEAF(r4k_wait) + .set push + .set noreorder + /* start of rollback region */ + LONG_L t0, TI_FLAGS($28) + nop + andi t0, _TIF_NEED_RESCHED + bnez t0, 1f + nop + nop + nop + .set mips3 + wait + /* end of rollback region (the region size must be power of two) */ + .set pop +1: + jr ra + END(r4k_wait) + + .macro BUILD_ROLLBACK_PROLOGUE handler + FEXPORT(rollback_\handler) + .set push + .set noat + MFC0 k0, CP0_EPC + PTR_LA k1, r4k_wait + ori k0, 0x1f /* 32 byte rollback region */ + xori k0, 0x1f + bne k0, k1, 9f + MTC0 k0, CP0_EPC +9: + .set pop + .endm + .align 5 +BUILD_ROLLBACK_PROLOGUE handle_int NESTED(handle_int, PT_SIZE, sp) #ifdef CONFIG_TRACE_IRQFLAGS /* @@ -201,6 +237,7 @@ NESTED(except_vec_ejtag_debug, 0, sp) * This prototype is copied to ebase + n*IntCtl.VS and patched * to invoke the handler */ +BUILD_ROLLBACK_PROLOGUE except_vec_vi NESTED(except_vec_vi, 0, sp) SAVE_SOME SAVE_AT @@ -245,8 +282,8 @@ NESTED(except_vec_vi_handler, 0, sp) and t0, a0, t1 #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP mfc0 t2, CP0_TCCONTEXT - or t0, t0, t2 - mtc0 t0, CP0_TCCONTEXT + or t2, t0, t2 + mtc0 t2, CP0_TCCONTEXT #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */ xor t1, t1, t0 mtc0 t1, CP0_STATUS @@ -416,7 +453,11 @@ NESTED(nmi_handler, PT_SIZE, sp) BUILD_HANDLER tr tr sti silent /* #13 */ BUILD_HANDLER fpe fpe fpe silent /* #15 */ BUILD_HANDLER mdmx mdmx sti silent /* #22 */ +#ifdef CONFIG_HARDWARE_WATCHPOINTS + BUILD_HANDLER watch watch sti silent /* #23 */ +#else BUILD_HANDLER watch watch sti verbose /* #23 */ +#endif BUILD_HANDLER mcheck mcheck cli verbose /* #24 */ BUILD_HANDLER mt mt sti silent /* #25 */ BUILD_HANDLER dsp dsp sti silent /* #26 */ diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index 361364501d34..492a0a8d70fb 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -22,6 +22,7 @@ #include <asm/irqflags.h> #include <asm/regdef.h> #include <asm/page.h> +#include <asm/pgtable-bits.h> #include <asm/mipsregs.h> #include <asm/stackframe.h> diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c index 8f6d58ede33c..6e152c80cd4a 100644 --- a/arch/mips/kernel/kgdb.c +++ b/arch/mips/kernel/kgdb.c @@ -236,8 +236,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, atomic_set(&kgdb_cpu_doing_single_step, -1); if (remcom_in_buffer[0] == 's') - if (kgdb_contthread) - atomic_set(&kgdb_cpu_doing_single_step, cpu); + atomic_set(&kgdb_cpu_doing_single_step, cpu); return 0; } diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c index df4d3f2f740c..dc9eb72ed9de 100644 --- a/arch/mips/kernel/mips-mt-fpaff.c +++ b/arch/mips/kernel/mips-mt-fpaff.c @@ -159,7 +159,7 @@ __setup("fpaff=", fpaff_thresh); /* * FPU Use Factor empirically derived from experiments on 34K */ -#define FPUSEFACTOR 333 +#define FPUSEFACTOR 2000 static __init int mt_fp_affinity_init(void) { diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 36f065398243..75bb1300dd7a 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -23,6 +23,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) unsigned int version = cpu_data[n].processor_id; unsigned int fp_vers = cpu_data[n].fpu_id; char fmt [64]; + int i; #ifdef CONFIG_SMP if (!cpu_isset(n, cpu_online_map)) @@ -50,8 +51,16 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "tlb_entries\t\t: %d\n", cpu_data[n].tlbsize); seq_printf(m, "extra interrupt vector\t: %s\n", cpu_has_divec ? "yes" : "no"); - seq_printf(m, "hardware watchpoint\t: %s\n", - cpu_has_watch ? "yes" : "no"); + seq_printf(m, "hardware watchpoint\t: %s", + cpu_has_watch ? "yes, " : "no\n"); + if (cpu_has_watch) { + seq_printf(m, "count: %d, address/irw mask: [", + cpu_data[n].watch_reg_count); + for (i = 0; i < cpu_data[n].watch_reg_count; i++) + seq_printf(m, "%s0x%04x", i ? ", " : "" , + cpu_data[n].watch_reg_masks[i]); + seq_printf(m, "]\n"); + } seq_printf(m, "ASEs implemented\t:%s%s%s%s%s%s\n", cpu_has_mips16 ? " mips16" : "", cpu_has_mdmx ? " mdmx" : "", diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index b16facd9ea8e..22fc19bbe87f 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -55,7 +55,7 @@ void __noreturn cpu_idle(void) while (1) { tick_nohz_stop_sched_tick(1); while (!need_resched()) { -#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG +#ifdef CONFIG_MIPS_MT_SMTC extern void smtc_idle_loop_hook(void); smtc_idle_loop_hook(); @@ -145,17 +145,18 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, */ p->thread.cp0_status = read_c0_status() & ~(ST0_CU2|ST0_CU1); childregs->cp0_status &= ~(ST0_CU2|ST0_CU1); - clear_tsk_thread_flag(p, TIF_USEDFPU); -#ifdef CONFIG_MIPS_MT_FPAFF +#ifdef CONFIG_MIPS_MT_SMTC /* - * FPU affinity support is cleaner if we track the - * user-visible CPU affinity from the very beginning. - * The generic cpus_allowed mask will already have - * been copied from the parent before copy_thread - * is invoked. + * SMTC restores TCStatus after Status, and the CU bits + * are aliased there. */ - p->thread.user_cpus_allowed = p->cpus_allowed; + childregs->cp0_tcstatus &= ~(ST0_CU2|ST0_CU1); +#endif + clear_tsk_thread_flag(p, TIF_USEDFPU); + +#ifdef CONFIG_MIPS_MT_FPAFF + clear_tsk_thread_flag(p, TIF_FPUBOUND); #endif /* CONFIG_MIPS_MT_FPAFF */ if (clone_flags & CLONE_SETTLS) diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 35234b92b9a5..054861ccb4dd 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -46,7 +46,8 @@ */ void ptrace_disable(struct task_struct *child) { - /* Nothing to do.. */ + /* Don't load the watchpoint registers for the ex-child. */ + clear_tsk_thread_flag(child, TIF_LOAD_WATCH); } /* @@ -167,6 +168,93 @@ int ptrace_setfpregs(struct task_struct *child, __u32 __user *data) return 0; } +int ptrace_get_watch_regs(struct task_struct *child, + struct pt_watch_regs __user *addr) +{ + enum pt_watch_style style; + int i; + + if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0) + return -EIO; + if (!access_ok(VERIFY_WRITE, addr, sizeof(struct pt_watch_regs))) + return -EIO; + +#ifdef CONFIG_32BIT + style = pt_watch_style_mips32; +#define WATCH_STYLE mips32 +#else + style = pt_watch_style_mips64; +#define WATCH_STYLE mips64 +#endif + + __put_user(style, &addr->style); + __put_user(current_cpu_data.watch_reg_use_cnt, + &addr->WATCH_STYLE.num_valid); + for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) { + __put_user(child->thread.watch.mips3264.watchlo[i], + &addr->WATCH_STYLE.watchlo[i]); + __put_user(child->thread.watch.mips3264.watchhi[i] & 0xfff, + &addr->WATCH_STYLE.watchhi[i]); + __put_user(current_cpu_data.watch_reg_masks[i], + &addr->WATCH_STYLE.watch_masks[i]); + } + for (; i < 8; i++) { + __put_user(0, &addr->WATCH_STYLE.watchlo[i]); + __put_user(0, &addr->WATCH_STYLE.watchhi[i]); + __put_user(0, &addr->WATCH_STYLE.watch_masks[i]); + } + + return 0; +} + +int ptrace_set_watch_regs(struct task_struct *child, + struct pt_watch_regs __user *addr) +{ + int i; + int watch_active = 0; + unsigned long lt[NUM_WATCH_REGS]; + u16 ht[NUM_WATCH_REGS]; + + if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0) + return -EIO; + if (!access_ok(VERIFY_READ, addr, sizeof(struct pt_watch_regs))) + return -EIO; + /* Check the values. */ + for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) { + __get_user(lt[i], &addr->WATCH_STYLE.watchlo[i]); +#ifdef CONFIG_32BIT + if (lt[i] & __UA_LIMIT) + return -EINVAL; +#else + if (test_tsk_thread_flag(child, TIF_32BIT_ADDR)) { + if (lt[i] & 0xffffffff80000000UL) + return -EINVAL; + } else { + if (lt[i] & __UA_LIMIT) + return -EINVAL; + } +#endif + __get_user(ht[i], &addr->WATCH_STYLE.watchhi[i]); + if (ht[i] & ~0xff8) + return -EINVAL; + } + /* Install them. */ + for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) { + if (lt[i] & 7) + watch_active = 1; + child->thread.watch.mips3264.watchlo[i] = lt[i]; + /* Set the G bit. */ + child->thread.watch.mips3264.watchhi[i] = ht[i]; + } + + if (watch_active) + set_tsk_thread_flag(child, TIF_LOAD_WATCH); + else + clear_tsk_thread_flag(child, TIF_LOAD_WATCH); + + return 0; +} + long arch_ptrace(struct task_struct *child, long request, long addr, long data) { int ret; @@ -238,7 +326,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case FPC_EIR: { /* implementation / version register */ unsigned int flags; #ifdef CONFIG_MIPS_MT_SMTC - unsigned int irqflags; + unsigned long irqflags; unsigned int mtflags; #endif /* CONFIG_MIPS_MT_SMTC */ @@ -440,6 +528,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) (unsigned long __user *) data); break; + case PTRACE_GET_WATCH_REGS: + ret = ptrace_get_watch_regs(child, + (struct pt_watch_regs __user *) addr); + break; + + case PTRACE_SET_WATCH_REGS: + ret = ptrace_set_watch_regs(child, + (struct pt_watch_regs __user *) addr); + break; + default: ret = ptrace_request(child, request, addr, data); break; diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c index 76818be6ba7c..1ca34104e593 100644 --- a/arch/mips/kernel/ptrace32.c +++ b/arch/mips/kernel/ptrace32.c @@ -15,6 +15,7 @@ * binaries. */ #include <linux/compiler.h> +#include <linux/compat.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/mm.h> @@ -36,47 +37,17 @@ #include <asm/uaccess.h> #include <asm/bootinfo.h> -int ptrace_getregs(struct task_struct *child, __s64 __user *data); -int ptrace_setregs(struct task_struct *child, __s64 __user *data); - -int ptrace_getfpregs(struct task_struct *child, __u32 __user *data); -int ptrace_setfpregs(struct task_struct *child, __u32 __user *data); - /* * Tracing a 32-bit process with a 64-bit strace and vice versa will not * work. I don't know how to fix this. */ -asmlinkage int sys32_ptrace(int request, int pid, int addr, int data) +long compat_arch_ptrace(struct task_struct *child, compat_long_t request, + compat_ulong_t caddr, compat_ulong_t cdata) { - struct task_struct *child; + int addr = caddr; + int data = cdata; int ret; -#if 0 - printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n", - (int) request, (int) pid, (unsigned long) addr, - (unsigned long) data); -#endif - lock_kernel(); - if (request == PTRACE_TRACEME) { - ret = ptrace_traceme(); - goto out; - } - - child = ptrace_get_task_struct(pid); - if (IS_ERR(child)) { - ret = PTR_ERR(child); - goto out; - } - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -214,7 +185,7 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data) if (!cpu_has_dsp) { tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } dregs = __get_dsp_regs(child); tmp = (unsigned long) (dregs[addr - DSP_BASE]); @@ -224,14 +195,14 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data) if (!cpu_has_dsp) { tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } tmp = child->thread.dsp.dspcontrol; break; default: tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } ret = put_user(tmp, (unsigned __user *) (unsigned long) data); break; @@ -410,14 +381,20 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data) (unsigned long __user *) (unsigned long) data); break; + case PTRACE_GET_WATCH_REGS: + ret = ptrace_get_watch_regs(child, + (struct pt_watch_regs __user *) (unsigned long) addr); + break; + + case PTRACE_SET_WATCH_REGS: + ret = ptrace_set_watch_regs(child, + (struct pt_watch_regs __user *) (unsigned long) addr); + break; + default: ret = ptrace_request(child, request, addr, data); break; } - -out_tsk: - put_task_struct(child); out: - unlock_kernel(); return ret; } diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index da7f1b6ea0fb..324c5499dec2 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -219,7 +219,7 @@ EXPORT(sysn32_call_table) PTR compat_sys_getrusage PTR compat_sys_sysinfo PTR compat_sys_times - PTR sys32_ptrace + PTR compat_sys_ptrace PTR sys_getuid /* 6100 */ PTR sys_syslog PTR sys_getgid diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index d7cd1aac9ada..85fedac99a57 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -231,7 +231,7 @@ sys_call_table: PTR sys_setuid PTR sys_getuid PTR compat_sys_stime /* 4025 */ - PTR sys32_ptrace + PTR compat_sys_ptrace PTR sys_alarm PTR sys_ni_syscall /* was sys_fstat */ PTR sys_pause diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 572c610db1b1..652709b353ad 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -482,6 +482,18 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) return err; } +int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) +{ + memset(to, 0, sizeof *to); + + if (copy_from_user(to, from, 3*sizeof(int)) || + copy_from_user(to->_sifields._pad, + from->_sifields._pad, SI_PAD_SIZE32)) + return -EFAULT; + + return 0; +} + asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs) { struct sigframe32 __user *frame; diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 4410f172b8ab..7b59cfb7e602 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -121,6 +121,8 @@ asmlinkage __cpuinit void start_secondary(void) cpu = smp_processor_id(); cpu_data[cpu].udelay_val = loops_per_jiffy; + notify_cpu_starting(cpu); + mp_ops->smp_finish(); set_cpu_sibling_map(cpu); diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index a516286532ab..897fb2b4751c 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -1,4 +1,21 @@ -/* Copyright (C) 2004 Mips Technologies, Inc */ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2004 Mips Technologies, Inc + * Copyright (C) 2008 Kevin D. Kissell + */ #include <linux/clockchips.h> #include <linux/kernel.h> @@ -21,7 +38,6 @@ #include <asm/time.h> #include <asm/addrspace.h> #include <asm/smtc.h> -#include <asm/smtc_ipi.h> #include <asm/smtc_proc.h> /* @@ -58,11 +74,6 @@ unsigned long irq_hwmask[NR_IRQS]; asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS]; -/* - * Clock interrupt "latch" buffers, per "CPU" - */ - -static atomic_t ipi_timer_latch[NR_CPUS]; /* * Number of InterProcessor Interrupt (IPI) message buffers to allocate @@ -70,7 +81,7 @@ static atomic_t ipi_timer_latch[NR_CPUS]; #define IPIBUF_PER_CPU 4 -static struct smtc_ipi_q IPIQ[NR_CPUS]; +struct smtc_ipi_q IPIQ[NR_CPUS]; static struct smtc_ipi_q freeIPIq; @@ -282,7 +293,7 @@ static void smtc_configure_tlb(void) * phys_cpu_present_map and the logical/physical mappings. */ -int __init mipsmt_build_cpu_map(int start_cpu_slot) +int __init smtc_build_cpu_map(int start_cpu_slot) { int i, ntcs; @@ -325,7 +336,12 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A); - write_tc_c0_tccontext(0); + /* + * TCContext gets an offset from the base of the IPIQ array + * to be used in low-level code to detect the presence of + * an active IPI queue + */ + write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16); /* Bind tc to vpe */ write_tc_c0_tcbind(vpe); /* In general, all TCs should have the same cpu_data indications */ @@ -336,10 +352,18 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) cpu_data[cpu].options &= ~MIPS_CPU_FPU; cpu_data[cpu].vpe_id = vpe; cpu_data[cpu].tc_id = tc; + /* Multi-core SMTC hasn't been tested, but be prepared */ + cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff; } +/* + * Tweak to get Count registes in as close a sync as possible. + * Value seems good for 34K-class cores. + */ + +#define CP0_SKEW 8 -void mipsmt_prepare_cpus(void) +void smtc_prepare_cpus(int cpus) { int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu; unsigned long flags; @@ -363,13 +387,13 @@ void mipsmt_prepare_cpus(void) IPIQ[i].head = IPIQ[i].tail = NULL; spin_lock_init(&IPIQ[i].lock); IPIQ[i].depth = 0; - atomic_set(&ipi_timer_latch[i], 0); } /* cpu_data index starts at zero */ cpu = 0; cpu_data[cpu].vpe_id = 0; cpu_data[cpu].tc_id = 0; + cpu_data[cpu].core = (read_c0_ebase() >> 1) & 0xff; cpu++; /* Report on boot-time options */ @@ -484,7 +508,8 @@ void mipsmt_prepare_cpus(void) write_vpe_c0_compare(0); /* Propagate Config7 */ write_vpe_c0_config7(read_c0_config7()); - write_vpe_c0_count(read_c0_count()); + write_vpe_c0_count(read_c0_count() + CP0_SKEW); + ehb(); } /* enable multi-threading within VPE */ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE); @@ -556,7 +581,7 @@ void mipsmt_prepare_cpus(void) void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle) { extern u32 kernelsp[NR_CPUS]; - long flags; + unsigned long flags; int mtflags; LOCK_MT_PRA(); @@ -585,24 +610,22 @@ void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle) void smtc_init_secondary(void) { - /* - * Start timer on secondary VPEs if necessary. - * plat_timer_setup has already have been invoked by init/main - * on "boot" TC. Like per_cpu_trap_init() hack, this assumes that - * SMTC init code assigns TCs consdecutively and in ascending order - * to across available VPEs. - */ - if (((read_c0_tcbind() & TCBIND_CURTC) != 0) && - ((read_c0_tcbind() & TCBIND_CURVPE) - != cpu_data[smp_processor_id() - 1].vpe_id)){ - write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); - } - local_irq_enable(); } void smtc_smp_finish(void) { + int cpu = smp_processor_id(); + + /* + * Lowest-numbered CPU per VPE starts a clock tick. + * Like per_cpu_trap_init() hack, this assumes that + * SMTC init code assigns TCs consdecutively and + * in ascending order across available VPEs. + */ + if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id)) + write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); + printk("TC %d going on-line as CPU %d\n", cpu_data[smp_processor_id()].tc_id, smp_processor_id()); } @@ -753,8 +776,10 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) { int tcstatus; struct smtc_ipi *pipi; - long flags; + unsigned long flags; int mtflags; + unsigned long tcrestart; + extern void r4k_wait_irqoff(void), __pastwait(void); if (cpu == smp_processor_id()) { printk("Cannot Send IPI to self!\n"); @@ -771,8 +796,6 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) pipi->arg = (void *)action; pipi->dest = cpu; if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { - if (type == SMTC_CLOCK_TICK) - atomic_inc(&ipi_timer_latch[cpu]); /* If not on same VPE, enqueue and send cross-VPE interrupt */ smtc_ipi_nq(&IPIQ[cpu], pipi); LOCK_CORE_PRA(); @@ -800,22 +823,29 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) if ((tcstatus & TCSTATUS_IXMT) != 0) { /* - * Spin-waiting here can deadlock, - * so we queue the message for the target TC. + * If we're in the the irq-off version of the wait + * loop, we need to force exit from the wait and + * do a direct post of the IPI. + */ + if (cpu_wait == r4k_wait_irqoff) { + tcrestart = read_tc_c0_tcrestart(); + if (tcrestart >= (unsigned long)r4k_wait_irqoff + && tcrestart < (unsigned long)__pastwait) { + write_tc_c0_tcrestart(__pastwait); + tcstatus &= ~TCSTATUS_IXMT; + write_tc_c0_tcstatus(tcstatus); + goto postdirect; + } + } + /* + * Otherwise we queue the message for the target TC + * to pick up when he does a local_irq_restore() */ write_tc_c0_tchalt(0); UNLOCK_CORE_PRA(); - /* Try to reduce redundant timer interrupt messages */ - if (type == SMTC_CLOCK_TICK) { - if (atomic_postincrement(&ipi_timer_latch[cpu])!=0){ - smtc_ipi_nq(&freeIPIq, pipi); - return; - } - } smtc_ipi_nq(&IPIQ[cpu], pipi); } else { - if (type == SMTC_CLOCK_TICK) - atomic_inc(&ipi_timer_latch[cpu]); +postdirect: post_direct_ipi(cpu, pipi); write_tc_c0_tchalt(0); UNLOCK_CORE_PRA(); @@ -883,7 +913,7 @@ static void ipi_call_interrupt(void) smp_call_function_interrupt(); } -DECLARE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device); +DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device); void ipi_decode(struct smtc_ipi *pipi) { @@ -891,20 +921,13 @@ void ipi_decode(struct smtc_ipi *pipi) struct clock_event_device *cd; void *arg_copy = pipi->arg; int type_copy = pipi->type; - int ticks; - smtc_ipi_nq(&freeIPIq, pipi); switch (type_copy) { case SMTC_CLOCK_TICK: irq_enter(); kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + 1]++; - cd = &per_cpu(smtc_dummy_clockevent_device, cpu); - ticks = atomic_read(&ipi_timer_latch[cpu]); - atomic_sub(ticks, &ipi_timer_latch[cpu]); - while (ticks) { - cd->event_handler(cd); - ticks--; - } + cd = &per_cpu(mips_clockevent_device, cpu); + cd->event_handler(cd); irq_exit(); break; @@ -937,24 +960,48 @@ void ipi_decode(struct smtc_ipi *pipi) } } +/* + * Similar to smtc_ipi_replay(), but invoked from context restore, + * so it reuses the current exception frame rather than set up a + * new one with self_ipi. + */ + void deferred_smtc_ipi(void) { - struct smtc_ipi *pipi; - unsigned long flags; -/* DEBUG */ - int q = smp_processor_id(); + int cpu = smp_processor_id(); /* * Test is not atomic, but much faster than a dequeue, * and the vast majority of invocations will have a null queue. + * If irq_disabled when this was called, then any IPIs queued + * after we test last will be taken on the next irq_enable/restore. + * If interrupts were enabled, then any IPIs added after the + * last test will be taken directly. */ - if (IPIQ[q].head != NULL) { - while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) { - /* ipi_decode() should be called with interrupts off */ - local_irq_save(flags); + + while (IPIQ[cpu].head != NULL) { + struct smtc_ipi_q *q = &IPIQ[cpu]; + struct smtc_ipi *pipi; + unsigned long flags; + + /* + * It may be possible we'll come in with interrupts + * already enabled. + */ + local_irq_save(flags); + + spin_lock(&q->lock); + pipi = __smtc_ipi_dq(q); + spin_unlock(&q->lock); + if (pipi != NULL) ipi_decode(pipi); - local_irq_restore(flags); - } + /* + * The use of the __raw_local restore isn't + * as obviously necessary here as in smtc_ipi_replay(), + * but it's more efficient, given that we're already + * running down the IPI queue. + */ + __raw_local_irq_restore(flags); } } @@ -975,7 +1022,7 @@ static irqreturn_t ipi_interrupt(int irq, void *dev_idm) struct smtc_ipi *pipi; unsigned long tcstatus; int sent; - long flags; + unsigned long flags; unsigned int mtflags; unsigned int vpflags; @@ -1066,55 +1113,53 @@ static void setup_cross_vpe_interrupts(unsigned int nvpe) /* * SMTC-specific hacks invoked from elsewhere in the kernel. - * - * smtc_ipi_replay is called from raw_local_irq_restore which is only ever - * called with interrupts disabled. We do rely on interrupts being disabled - * here because using spin_lock_irqsave()/spin_unlock_irqrestore() would - * result in a recursive call to raw_local_irq_restore(). */ -static void __smtc_ipi_replay(void) + /* + * smtc_ipi_replay is called from raw_local_irq_restore + */ + +void smtc_ipi_replay(void) { unsigned int cpu = smp_processor_id(); /* * To the extent that we've ever turned interrupts off, * we may have accumulated deferred IPIs. This is subtle. - * If we use the smtc_ipi_qdepth() macro, we'll get an - * exact number - but we'll also disable interrupts - * and create a window of failure where a new IPI gets - * queued after we test the depth but before we re-enable - * interrupts. So long as IXMT never gets set, however, * we should be OK: If we pick up something and dispatch * it here, that's great. If we see nothing, but concurrent * with this operation, another TC sends us an IPI, IXMT * is clear, and we'll handle it as a real pseudo-interrupt - * and not a pseudo-pseudo interrupt. + * and not a pseudo-pseudo interrupt. The important thing + * is to do the last check for queued message *after* the + * re-enabling of interrupts. */ - if (IPIQ[cpu].depth > 0) { - while (1) { - struct smtc_ipi_q *q = &IPIQ[cpu]; - struct smtc_ipi *pipi; - extern void self_ipi(struct smtc_ipi *); - - spin_lock(&q->lock); - pipi = __smtc_ipi_dq(q); - spin_unlock(&q->lock); - if (!pipi) - break; + while (IPIQ[cpu].head != NULL) { + struct smtc_ipi_q *q = &IPIQ[cpu]; + struct smtc_ipi *pipi; + unsigned long flags; + + /* + * It's just possible we'll come in with interrupts + * already enabled. + */ + local_irq_save(flags); + + spin_lock(&q->lock); + pipi = __smtc_ipi_dq(q); + spin_unlock(&q->lock); + /* + ** But use a raw restore here to avoid recursion. + */ + __raw_local_irq_restore(flags); + if (pipi) { self_ipi(pipi); smtc_cpu_stats[cpu].selfipis++; } } } -void smtc_ipi_replay(void) -{ - raw_local_irq_disable(); - __smtc_ipi_replay(); -} - EXPORT_SYMBOL(smtc_ipi_replay); void smtc_idle_loop_hook(void) @@ -1193,40 +1238,13 @@ void smtc_idle_loop_hook(void) } } - /* - * Now that we limit outstanding timer IPIs, check for hung TC - */ - for (tc = 0; tc < NR_CPUS; tc++) { - /* Don't check ourself - we'll dequeue IPIs just below */ - if ((tc != smp_processor_id()) && - atomic_read(&ipi_timer_latch[tc]) > timerq_limit) { - if (clock_hang_reported[tc] == 0) { - pdb_msg += sprintf(pdb_msg, - "TC %d looks hung with timer latch at %d\n", - tc, atomic_read(&ipi_timer_latch[tc])); - clock_hang_reported[tc]++; - } - } - } emt(mtflags); local_irq_restore(flags); if (pdb_msg != &id_ho_db_msg[0]) printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg); #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */ - /* - * Replay any accumulated deferred IPIs. If "Instant Replay" - * is in use, there should never be any. - */ -#ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY - { - unsigned long flags; - - local_irq_save(flags); - __smtc_ipi_replay(); - local_irq_restore(flags); - } -#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */ + smtc_ipi_replay(); } void smtc_soft_dump(void) @@ -1242,10 +1260,6 @@ void smtc_soft_dump(void) printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis); } smtc_ipi_qdump(); - printk("Timer IPI Backlogs:\n"); - for (i=0; i < NR_CPUS; i++) { - printk("%d: %d\n", i, atomic_read(&ipi_timer_latch[i])); - } printk("%d Recoveries of \"stolen\" FPU\n", atomic_read(&smtc_fpu_recoveries)); } diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 6bee29097a56..80b9e070c207 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -42,10 +42,14 @@ #include <asm/tlbdebug.h> #include <asm/traps.h> #include <asm/uaccess.h> +#include <asm/watch.h> #include <asm/mmu_context.h> #include <asm/types.h> #include <asm/stacktrace.h> +extern void check_wait(void); +extern asmlinkage void r4k_wait(void); +extern asmlinkage void rollback_handle_int(void); extern asmlinkage void handle_int(void); extern asmlinkage void handle_tlbm(void); extern asmlinkage void handle_tlbl(void); @@ -822,8 +826,10 @@ static void mt_ase_fp_affinity(void) if (cpus_intersects(current->cpus_allowed, mt_fpu_cpumask)) { cpumask_t tmask; - cpus_and(tmask, current->thread.user_cpus_allowed, - mt_fpu_cpumask); + current->thread.user_cpus_allowed + = current->cpus_allowed; + cpus_and(tmask, current->cpus_allowed, + mt_fpu_cpumask); set_cpus_allowed(current, tmask); set_thread_flag(TIF_FPUBOUND); } @@ -907,13 +913,26 @@ asmlinkage void do_mdmx(struct pt_regs *regs) asmlinkage void do_watch(struct pt_regs *regs) { + u32 cause; + /* - * We use the watch exception where available to detect stack - * overflows. + * Clear WP (bit 22) bit of cause register so we don't loop + * forever. */ - dump_tlb_all(); - show_regs(regs); - panic("Caught WATCH exception - probably caused by stack overflow."); + cause = read_c0_cause(); + cause &= ~(1 << 22); + write_c0_cause(cause); + + /* + * If the current thread has the watch registers loaded, save + * their values and send SIGTRAP. Otherwise another thread + * left the registers set, clear them and continue. + */ + if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) { + mips_read_watch_registers(); + force_sig(SIGTRAP, current); + } else + mips_clear_watch_registers(); } asmlinkage void do_mcheck(struct pt_regs *regs) @@ -1251,6 +1270,9 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) extern char except_vec_vi, except_vec_vi_lui; extern char except_vec_vi_ori, except_vec_vi_end; + extern char rollback_except_vec_vi; + char *vec_start = (cpu_wait == r4k_wait) ? + &rollback_except_vec_vi : &except_vec_vi; #ifdef CONFIG_MIPS_MT_SMTC /* * We need to provide the SMTC vectored interrupt handler @@ -1258,11 +1280,11 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) * Status.IM bit to be masked before going there. */ extern char except_vec_vi_mori; - const int mori_offset = &except_vec_vi_mori - &except_vec_vi; + const int mori_offset = &except_vec_vi_mori - vec_start; #endif /* CONFIG_MIPS_MT_SMTC */ - const int handler_len = &except_vec_vi_end - &except_vec_vi; - const int lui_offset = &except_vec_vi_lui - &except_vec_vi; - const int ori_offset = &except_vec_vi_ori - &except_vec_vi; + const int handler_len = &except_vec_vi_end - vec_start; + const int lui_offset = &except_vec_vi_lui - vec_start; + const int ori_offset = &except_vec_vi_ori - vec_start; if (handler_len > VECTORSPACING) { /* @@ -1272,7 +1294,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) panic("VECTORSPACING too small"); } - memcpy(b, &except_vec_vi, handler_len); + memcpy(b, vec_start, handler_len); #ifdef CONFIG_MIPS_MT_SMTC BUG_ON(n > 7); /* Vector index %d exceeds SMTC maximum. */ @@ -1554,6 +1576,10 @@ void __init trap_init(void) extern char except_vec3_generic, except_vec3_r4000; extern char except_vec4; unsigned long i; + int rollback; + + check_wait(); + rollback = (cpu_wait == r4k_wait); #if defined(CONFIG_KGDB) if (kgdb_early_setup) @@ -1618,7 +1644,7 @@ void __init trap_init(void) if (board_be_init) board_be_init(); - set_except_vector(0, handle_int); + set_except_vector(0, rollback ? rollback_handle_int : handle_int); set_except_vector(1, handle_tlbm); set_except_vector(2, handle_tlbl); set_except_vector(3, handle_tlbs); diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index b5470ceb418b..afb119f35682 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -36,6 +36,7 @@ SECTIONS SCHED_TEXT LOCK_TEXT KPROBES_TEXT + *(.text.*) *(.fixup) *(.gnu.warning) } :text = 0 diff --git a/arch/mips/kernel/watch.c b/arch/mips/kernel/watch.c new file mode 100644 index 000000000000..c15406968030 --- /dev/null +++ b/arch/mips/kernel/watch.c @@ -0,0 +1,188 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 David Daney + */ + +#include <linux/sched.h> + +#include <asm/processor.h> +#include <asm/watch.h> + +/* + * Install the watch registers for the current thread. A maximum of + * four registers are installed although the machine may have more. + */ +void mips_install_watch_registers(void) +{ + struct mips3264_watch_reg_state *watches = + ¤t->thread.watch.mips3264; + switch (current_cpu_data.watch_reg_use_cnt) { + default: + BUG(); + case 4: + write_c0_watchlo3(watches->watchlo[3]); + /* Write 1 to the I, R, and W bits to clear them, and + 1 to G so all ASIDs are trapped. */ + write_c0_watchhi3(0x40000007 | watches->watchhi[3]); + case 3: + write_c0_watchlo2(watches->watchlo[2]); + write_c0_watchhi2(0x40000007 | watches->watchhi[2]); + case 2: + write_c0_watchlo1(watches->watchlo[1]); + write_c0_watchhi1(0x40000007 | watches->watchhi[1]); + case 1: + write_c0_watchlo0(watches->watchlo[0]); + write_c0_watchhi0(0x40000007 | watches->watchhi[0]); + } +} + +/* + * Read back the watchhi registers so the user space debugger has + * access to the I, R, and W bits. A maximum of four registers are + * read although the machine may have more. + */ +void mips_read_watch_registers(void) +{ + struct mips3264_watch_reg_state *watches = + ¤t->thread.watch.mips3264; + switch (current_cpu_data.watch_reg_use_cnt) { + default: + BUG(); + case 4: + watches->watchhi[3] = (read_c0_watchhi3() & 0x0fff); + case 3: + watches->watchhi[2] = (read_c0_watchhi2() & 0x0fff); + case 2: + watches->watchhi[1] = (read_c0_watchhi1() & 0x0fff); + case 1: + watches->watchhi[0] = (read_c0_watchhi0() & 0x0fff); + } + if (current_cpu_data.watch_reg_use_cnt == 1 && + (watches->watchhi[0] & 7) == 0) { + /* Pathological case of release 1 architecture that + * doesn't set the condition bits. We assume that + * since we got here, the watch condition was met and + * signal that the conditions requested in watchlo + * were met. */ + watches->watchhi[0] |= (watches->watchlo[0] & 7); + } + } + +/* + * Disable all watch registers. Although only four registers are + * installed, all are cleared to eliminate the possibility of endless + * looping in the watch handler. + */ +void mips_clear_watch_registers(void) +{ + switch (current_cpu_data.watch_reg_count) { + default: + BUG(); + case 8: + write_c0_watchlo7(0); + case 7: + write_c0_watchlo6(0); + case 6: + write_c0_watchlo5(0); + case 5: + write_c0_watchlo4(0); + case 4: + write_c0_watchlo3(0); + case 3: + write_c0_watchlo2(0); + case 2: + write_c0_watchlo1(0); + case 1: + write_c0_watchlo0(0); + } +} + +__cpuinit void mips_probe_watch_registers(struct cpuinfo_mips *c) +{ + unsigned int t; + + if ((c->options & MIPS_CPU_WATCH) == 0) + return; + /* + * Check which of the I,R and W bits are supported, then + * disable the register. + */ + write_c0_watchlo0(7); + t = read_c0_watchlo0(); + write_c0_watchlo0(0); + c->watch_reg_masks[0] = t & 7; + + /* Write the mask bits and read them back to determine which + * can be used. */ + c->watch_reg_count = 1; + c->watch_reg_use_cnt = 1; + t = read_c0_watchhi0(); + write_c0_watchhi0(t | 0xff8); + t = read_c0_watchhi0(); + c->watch_reg_masks[0] |= (t & 0xff8); + if ((t & 0x80000000) == 0) + return; + + write_c0_watchlo1(7); + t = read_c0_watchlo1(); + write_c0_watchlo1(0); + c->watch_reg_masks[1] = t & 7; + + c->watch_reg_count = 2; + c->watch_reg_use_cnt = 2; + t = read_c0_watchhi1(); + write_c0_watchhi1(t | 0xff8); + t = read_c0_watchhi1(); + c->watch_reg_masks[1] |= (t & 0xff8); + if ((t & 0x80000000) == 0) + return; + + write_c0_watchlo2(7); + t = read_c0_watchlo2(); + write_c0_watchlo2(0); + c->watch_reg_masks[2] = t & 7; + + c->watch_reg_count = 3; + c->watch_reg_use_cnt = 3; + t = read_c0_watchhi2(); + write_c0_watchhi2(t | 0xff8); + t = read_c0_watchhi2(); + c->watch_reg_masks[2] |= (t & 0xff8); + if ((t & 0x80000000) == 0) + return; + + write_c0_watchlo3(7); + t = read_c0_watchlo3(); + write_c0_watchlo3(0); + c->watch_reg_masks[3] = t & 7; + + c->watch_reg_count = 4; + c->watch_reg_use_cnt = 4; + t = read_c0_watchhi3(); + write_c0_watchhi3(t | 0xff8); + t = read_c0_watchhi3(); + c->watch_reg_masks[3] |= (t & 0xff8); + if ((t & 0x80000000) == 0) + return; + + /* We use at most 4, but probe and report up to 8. */ + c->watch_reg_count = 5; + t = read_c0_watchhi4(); + if ((t & 0x80000000) == 0) + return; + + c->watch_reg_count = 6; + t = read_c0_watchhi5(); + if ((t & 0x80000000) == 0) + return; + + c->watch_reg_count = 7; + t = read_c0_watchhi6(); + if ((t & 0x80000000) == 0) + return; + + c->watch_reg_count = 8; +} diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index 8d7784122c14..6b876ca299ee 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -39,12 +39,14 @@ #ifdef USE_DOUBLE #define LOAD ld +#define LOAD32 lwu #define ADD daddu #define NBYTES 8 #else #define LOAD lw +#define LOAD32 lw #define ADD addu #define NBYTES 4 @@ -53,12 +55,14 @@ #define UNIT(unit) ((unit)*NBYTES) #define ADDC(sum,reg) \ - .set push; \ - .set noat; \ ADD sum, reg; \ sltu v1, sum, reg; \ ADD sum, v1; \ - .set pop + +#define ADDC32(sum,reg) \ + addu sum, reg; \ + sltu v1, sum, reg; \ + addu sum, v1; \ #define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \ LOAD _t0, (offset + UNIT(0))(src); \ @@ -132,7 +136,7 @@ LEAF(csum_partial) beqz t8, .Lqword_align andi t8, src, 0x8 - lw t0, 0x00(src) + LOAD32 t0, 0x00(src) LONG_SUBU a1, a1, 0x4 ADDC(sum, t0) PTR_ADDU src, src, 0x4 @@ -211,7 +215,7 @@ LEAF(csum_partial) LONG_SRL t8, t8, 0x2 .Lend_words: - lw t0, (src) + LOAD32 t0, (src) LONG_SUBU t8, t8, 0x1 ADDC(sum, t0) .set reorder /* DADDI_WAR */ @@ -230,6 +234,9 @@ LEAF(csum_partial) /* Still a full word to go */ ulw t1, (src) PTR_ADDIU src, 4 +#ifdef USE_DOUBLE + dsll t1, t1, 32 /* clear lower 32bit */ +#endif ADDC(sum, t1) 1: move t1, zero @@ -254,8 +261,6 @@ LEAF(csum_partial) 1: ADDC(sum, t1) /* fold checksum */ - .set push - .set noat #ifdef USE_DOUBLE dsll32 v1, sum, 0 daddu sum, v1 @@ -263,24 +268,25 @@ LEAF(csum_partial) dsra32 sum, sum, 0 addu sum, v1 #endif - sll v1, sum, 16 - addu sum, v1 - sltu v1, sum, v1 - srl sum, sum, 16 - addu sum, v1 /* odd buffer alignment? */ - beqz t7, 1f - nop - sll v1, sum, 8 +#ifdef CPU_MIPSR2 + wsbh v1, sum + movn sum, v1, t7 +#else + beqz t7, 1f /* odd buffer alignment? */ + lui v1, 0x00ff + addu v1, 0x00ff + and t0, sum, v1 + sll t0, t0, 8 srl sum, sum, 8 - or sum, v1 - andi sum, 0xffff - .set pop + and sum, sum, v1 + or sum, sum, t0 1: +#endif .set reorder /* Add the passed partial csum. */ - ADDC(sum, a2) + ADDC32(sum, a2) jr ra .set noreorder END(csum_partial) @@ -656,8 +662,6 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc) ADDC(sum, t2) .Ldone: /* fold checksum */ - .set push - .set noat #ifdef USE_DOUBLE dsll32 v1, sum, 0 daddu sum, v1 @@ -665,23 +669,23 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc) dsra32 sum, sum, 0 addu sum, v1 #endif - sll v1, sum, 16 - addu sum, v1 - sltu v1, sum, v1 - srl sum, sum, 16 - addu sum, v1 - /* odd buffer alignment? */ - beqz odd, 1f - nop - sll v1, sum, 8 +#ifdef CPU_MIPSR2 + wsbh v1, sum + movn sum, v1, odd +#else + beqz odd, 1f /* odd buffer alignment? */ + lui v1, 0x00ff + addu v1, 0x00ff + and t0, sum, v1 + sll t0, t0, 8 srl sum, sum, 8 - or sum, v1 - andi sum, 0xffff - .set pop + and sum, sum, v1 + or sum, sum, t0 1: +#endif .set reorder - ADDC(sum, psum) + ADDC32(sum, psum) jr ra .set noreorder diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile index 3b7dd722c32a..cef2db8d2225 100644 --- a/arch/mips/mti-malta/Makefile +++ b/arch/mips/mti-malta/Makefile @@ -15,6 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK) += malta-console.o obj-$(CONFIG_PCI) += malta-pci.o # FIXME FIXME FIXME -obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o +obj-$(CONFIG_MIPS_MT_SMTC) += malta-smtc.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c index 5ea705e49454..f84a46a8ae6e 100644 --- a/arch/mips/mti-malta/malta-smtc.c +++ b/arch/mips/mti-malta/malta-smtc.c @@ -84,12 +84,17 @@ static void msmtc_cpus_done(void) static void __init msmtc_smp_setup(void) { - mipsmt_build_cpu_map(0); + /* + * we won't get the definitive value until + * we've run smtc_prepare_cpus later, but + * we would appear to need an upper bound now. + */ + smp_num_siblings = smtc_build_cpu_map(0); } static void __init msmtc_prepare_cpus(unsigned int max_cpus) { - mipsmt_prepare_cpus(); + smtc_prepare_cpus(max_cpus); } struct plat_smp_ops msmtc_smp_ops = { diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 15e01aec37fd..b1886244cedf 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o +obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o # # These are still pretty much in the old state, watch, go blind. @@ -44,6 +45,7 @@ obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o obj-$(CONFIG_SOC_TX4927) += pci-tx4927.o obj-$(CONFIG_SOC_TX4938) += pci-tx4938.o +obj-$(CONFIG_SOC_TX4939) += pci-tx4939.o obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c new file mode 100644 index 000000000000..bea9b6cdfdbf --- /dev/null +++ b/arch/mips/pci/pci-bcm47xx.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2008 Aurelien Jarno <aurelien@aurel32.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/ssb/ssb.h> + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return 0; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + int res; + u8 slot, pin; + + res = ssb_pcibios_plat_dev_init(dev); + if (res < 0) { + printk(KERN_ALERT "PCI: Failed to init device %s\n", + pci_name(dev)); + return res; + } + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + slot = PCI_SLOT(dev->devfn); + res = ssb_pcibios_map_irq(dev, slot, pin); + + /* IRQ-0 and IRQ-1 are software interrupts. */ + if (res < 2) { + printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n", + pci_name(dev)); + return res; + } + + dev->irq = res; + return 0; +} + diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index bd78368c82bf..f97ab1461012 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -143,25 +143,47 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) */ int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { + return 0; +} + +/* Most MIPS systems have straight-forward swizzling needs. */ +static inline u8 bridge_swizzle(u8 pin, u8 slot) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev) +{ + while (dev->bus->parent) { + /* Move up the chain of bridges. */ + dev = dev->bus->self; + } + + return dev; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); - int irq = bc->pci_int[slot]; + struct pci_dev *rdev = bridge_root_dev(dev); + int slot = PCI_SLOT(rdev->devfn); + int irq; + irq = bc->pci_int[slot]; if (irq == -1) { - irq = bc->pci_int[slot] = request_bridge_irq(bc); + irq = request_bridge_irq(bc); if (irq < 0) - panic("Can't allocate interrupt for PCI device %s\n", - pci_name(dev)); + return irq; + + bc->pci_int[slot] = irq; } irq_to_bridge[irq] = bc; irq_to_slot[irq] = slot; - return irq; -} + dev->irq = irq; -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ return 0; } diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c index 60e2c52c2c5e..1ea257bc3b8f 100644 --- a/arch/mips/pci/pci-tx4938.c +++ b/arch/mips/pci/pci-tx4938.c @@ -114,7 +114,7 @@ int __init tx4938_pciclk66_setup(void) return pciclk; } -int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot) +int __init tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot) { if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4938_pcic1ptr) { switch (slot) { diff --git a/arch/mips/pci/pci-tx4939.c b/arch/mips/pci/pci-tx4939.c new file mode 100644 index 000000000000..5fecf1cdc325 --- /dev/null +++ b/arch/mips/pci/pci-tx4939.c @@ -0,0 +1,109 @@ +/* + * linux/arch/mips/pci/pci-tx4939.c + * + * Based on linux/arch/mips/txx9/rbtx4939/setup.c, + * and RBTX49xx patch from CELF patch archive. + * + * Copyright 2001, 2003-2005 MontaVista Software Inc. + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <asm/txx9/generic.h> +#include <asm/txx9/tx4939.h> + +int __init tx4939_report_pciclk(void) +{ + int pciclk = 0; + + pr_info("PCIC --%s PCICLK:", + (__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCI66) ? + " PCI66" : ""); + if (__raw_readq(&tx4939_ccfgptr->pcfg) & TX4939_PCFG_PCICLKEN_ALL) { + pciclk = txx9_master_clock * 20 / 6; + if (!(__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCI66)) + pciclk /= 2; + printk(KERN_CONT "Internal(%u.%uMHz)", + (pciclk + 50000) / 1000000, + ((pciclk + 50000) / 100000) % 10); + } else { + printk(KERN_CONT "External"); + pciclk = -1; + } + printk(KERN_CONT "\n"); + return pciclk; +} + +void __init tx4939_report_pci1clk(void) +{ + unsigned int pciclk = txx9_master_clock * 20 / 6; + + pr_info("PCIC1 -- PCICLK:%u.%uMHz\n", + (pciclk + 50000) / 1000000, + ((pciclk + 50000) / 100000) % 10); +} + +int __init tx4939_pcic1_map_irq(const struct pci_dev *dev, u8 slot) +{ + if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4939_pcic1ptr) { + switch (slot) { + case TX4927_PCIC_IDSEL_AD_TO_SLOT(31): + if (__raw_readq(&tx4939_ccfgptr->pcfg) & + TX4939_PCFG_ET0MODE) + return TXX9_IRQ_BASE + TX4939_IR_ETH(0); + break; + case TX4927_PCIC_IDSEL_AD_TO_SLOT(30): + if (__raw_readq(&tx4939_ccfgptr->pcfg) & + TX4939_PCFG_ET1MODE) + return TXX9_IRQ_BASE + TX4939_IR_ETH(1); + break; + } + return 0; + } + return -1; +} + +int __init tx4939_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq = tx4939_pcic1_map_irq(dev, slot); + + if (irq >= 0) + return irq; + irq = pin; + /* IRQ rotation */ + irq--; /* 0-3 */ + irq = (irq + 33 - slot) % 4; + irq++; /* 1-4 */ + + switch (irq) { + case 1: + irq = TXX9_IRQ_BASE + TX4939_IR_INTA; + break; + case 2: + irq = TXX9_IRQ_BASE + TX4939_IR_INTB; + break; + case 3: + irq = TXX9_IRQ_BASE + TX4939_IR_INTC; + break; + case 4: + irq = TXX9_IRQ_BASE + TX4939_IR_INTD; + break; + } + return irq; +} + +void __init tx4939_setup_pcierr_irq(void) +{ + if (request_irq(TXX9_IRQ_BASE + TX4939_IR_PCIERR, + tx4927_pcierr_interrupt, + IRQF_DISABLED, "PCI error", + (void *)TX4939_PCIC_REG)) + pr_warning("Failed to request irq for PCIERR\n"); +} diff --git a/arch/mips/pmc-sierra/msp71xx/Makefile b/arch/mips/pmc-sierra/msp71xx/Makefile index 4bba79c1cc79..e107f79b1491 100644 --- a/arch/mips/pmc-sierra/msp71xx/Makefile +++ b/arch/mips/pmc-sierra/msp71xx/Makefile @@ -3,6 +3,7 @@ # obj-y += msp_prom.o msp_setup.o msp_irq.o \ msp_time.o msp_serial.o msp_elb.o +obj-$(CONFIG_HAVE_GPIO_LIB) += gpio.o gpio_extended.o obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o diff --git a/arch/mips/pmc-sierra/msp71xx/gpio.c b/arch/mips/pmc-sierra/msp71xx/gpio.c new file mode 100644 index 000000000000..69848c5813e2 --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/gpio.c @@ -0,0 +1,218 @@ +/* + * @file /arch/mips/pmc-sierra/msp71xx/gpio.c + * + * Generic PMC MSP71xx GPIO handling. These base gpio are controlled by two + * types of registers. The data register sets the output level when in output + * mode and when in input mode will contain the value at the input. The config + * register sets the various modes for each gpio. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * @author Patrick Glass <patrickglass@gmail.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/spinlock.h> +#include <linux/io.h> + +#define MSP71XX_CFG_OFFSET(gpio) (4 * (gpio)) +#define CONF_MASK 0x0F +#define MSP71XX_GPIO_INPUT 0x01 +#define MSP71XX_GPIO_OUTPUT 0x08 + +#define MSP71XX_GPIO_BASE 0x0B8400000L + +#define to_msp71xx_gpio_chip(c) container_of(c, struct msp71xx_gpio_chip, chip) + +static spinlock_t gpio_lock; + +/* + * struct msp71xx_gpio_chip - container for gpio chip and registers + * @chip: chip structure for the specified gpio bank + * @data_reg: register for reading and writing the gpio pin value + * @config_reg: register to set the mode for the gpio pin bank + * @out_drive_reg: register to set the output drive mode for the gpio pin bank + */ +struct msp71xx_gpio_chip { + struct gpio_chip chip; + void __iomem *data_reg; + void __iomem *config_reg; + void __iomem *out_drive_reg; +}; + +/* + * msp71xx_gpio_get() - return the chip's gpio value + * @chip: chip structure which controls the specified gpio + * @offset: gpio whose value will be returned + * + * It will return 0 if gpio value is low and other if high. + */ +static int msp71xx_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip); + + return __raw_readl(msp_chip->data_reg) & (1 << offset); +} + +/* + * msp71xx_gpio_set() - set the output value for the gpio + * @chip: chip structure who controls the specified gpio + * @offset: gpio whose value will be assigned + * @value: logic level to assign to the gpio initially + * + * This will set the gpio bit specified to the desired value. It will set the + * gpio pin low if value is 0 otherwise it will be high. + */ +static void msp71xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip); + unsigned long flags; + u32 data; + + spin_lock_irqsave(&gpio_lock, flags); + + data = __raw_readl(msp_chip->data_reg); + if (value) + data |= (1 << offset); + else + data &= ~(1 << offset); + __raw_writel(data, msp_chip->data_reg); + + spin_unlock_irqrestore(&gpio_lock, flags); +} + +/* + * msp71xx_set_gpio_mode() - declare the mode for a gpio + * @chip: chip structure which controls the specified gpio + * @offset: gpio whose value will be assigned + * @mode: desired configuration for the gpio (see datasheet) + * + * It will set the gpio pin config to the @mode value passed in. + */ +static int msp71xx_set_gpio_mode(struct gpio_chip *chip, + unsigned offset, int mode) +{ + struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip); + const unsigned bit_offset = MSP71XX_CFG_OFFSET(offset); + unsigned long flags; + u32 cfg; + + spin_lock_irqsave(&gpio_lock, flags); + + cfg = __raw_readl(msp_chip->config_reg); + cfg &= ~(CONF_MASK << bit_offset); + cfg |= (mode << bit_offset); + __raw_writel(cfg, msp_chip->config_reg); + + spin_unlock_irqrestore(&gpio_lock, flags); + + return 0; +} + +/* + * msp71xx_direction_output() - declare the direction mode for a gpio + * @chip: chip structure which controls the specified gpio + * @offset: gpio whose value will be assigned + * @value: logic level to assign to the gpio initially + * + * This call will set the mode for the @gpio to output. It will set the + * gpio pin low if value is 0 otherwise it will be high. + */ +static int msp71xx_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + msp71xx_gpio_set(chip, offset, value); + + return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_OUTPUT); +} + +/* + * msp71xx_direction_input() - declare the direction mode for a gpio + * @chip: chip structure which controls the specified gpio + * @offset: gpio whose to which the value will be assigned + * + * This call will set the mode for the @gpio to input. + */ +static int msp71xx_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_INPUT); +} + +/* + * msp71xx_set_output_drive() - declare the output drive for the gpio line + * @gpio: gpio pin whose output drive you wish to modify + * @value: zero for active drain 1 for open drain drive + * + * This call will set the output drive mode for the @gpio to output. + */ +int msp71xx_set_output_drive(unsigned gpio, int value) +{ + unsigned long flags; + u32 data; + + if (gpio > 15 || gpio < 0) + return -EINVAL; + + spin_lock_irqsave(&gpio_lock, flags); + + data = __raw_readl((void __iomem *)(MSP71XX_GPIO_BASE + 0x190)); + if (value) + data |= (1 << gpio); + else + data &= ~(1 << gpio); + __raw_writel(data, (void __iomem *)(MSP71XX_GPIO_BASE + 0x190)); + + spin_unlock_irqrestore(&gpio_lock, flags); + + return 0; +} +EXPORT_SYMBOL(msp71xx_set_output_drive); + +#define MSP71XX_GPIO_BANK(name, dr, cr, base_gpio, num_gpio) \ +{ \ + .chip = { \ + .label = name, \ + .direction_input = msp71xx_direction_input, \ + .direction_output = msp71xx_direction_output, \ + .get = msp71xx_gpio_get, \ + .set = msp71xx_gpio_set, \ + .base = base_gpio, \ + .ngpio = num_gpio \ + }, \ + .data_reg = (void __iomem *)(MSP71XX_GPIO_BASE + dr), \ + .config_reg = (void __iomem *)(MSP71XX_GPIO_BASE + cr), \ + .out_drive_reg = (void __iomem *)(MSP71XX_GPIO_BASE + 0x190), \ +} + +/* + * struct msp71xx_gpio_banks[] - container array of gpio banks + * @chip: chip structure for the specified gpio bank + * @data_reg: register for reading and writing the gpio pin value + * @config_reg: register to set the mode for the gpio pin bank + * + * This array structure defines the gpio banks for the PMC MIPS Processor. + * We specify the bank name, the data register, the config register, base + * starting gpio number, and the number of gpios exposed by the bank. + */ +static struct msp71xx_gpio_chip msp71xx_gpio_banks[] = { + + MSP71XX_GPIO_BANK("GPIO_1_0", 0x170, 0x180, 0, 2), + MSP71XX_GPIO_BANK("GPIO_5_2", 0x174, 0x184, 2, 4), + MSP71XX_GPIO_BANK("GPIO_9_6", 0x178, 0x188, 6, 4), + MSP71XX_GPIO_BANK("GPIO_15_10", 0x17C, 0x18C, 10, 6), +}; + +void __init msp71xx_init_gpio(void) +{ + int i; + + spin_lock_init(&gpio_lock); + + for (i = 0; i < ARRAY_SIZE(msp71xx_gpio_banks); i++) + gpiochip_add(&msp71xx_gpio_banks[i].chip); +} diff --git a/arch/mips/pmc-sierra/msp71xx/gpio_extended.c b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c new file mode 100644 index 000000000000..fc6dbc6cf1c0 --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c @@ -0,0 +1,148 @@ +/* + * @file /arch/mips/pmc-sierra/msp71xx/gpio_extended.c + * + * Generic PMC MSP71xx EXTENDED (EXD) GPIO handling. The extended gpio is + * a set of hardware registers that have no need for explicit locking as + * it is handled by unique method of writing individual set/clr bits. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * @author Patrick Glass <patrickglass@gmail.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#define MSP71XX_DATA_OFFSET(gpio) (2 * (gpio)) +#define MSP71XX_READ_OFFSET(gpio) (MSP71XX_DATA_OFFSET(gpio) + 1) +#define MSP71XX_CFG_OUT_OFFSET(gpio) (MSP71XX_DATA_OFFSET(gpio) + 16) +#define MSP71XX_CFG_IN_OFFSET(gpio) (MSP71XX_CFG_OUT_OFFSET(gpio) + 1) + +#define MSP71XX_EXD_GPIO_BASE 0x0BC000000L + +#define to_msp71xx_exd_gpio_chip(c) \ + container_of(c, struct msp71xx_exd_gpio_chip, chip) + +/* + * struct msp71xx_exd_gpio_chip - container for gpio chip and registers + * @chip: chip structure for the specified gpio bank + * @reg: register for control and data of gpio pin + */ +struct msp71xx_exd_gpio_chip { + struct gpio_chip chip; + void __iomem *reg; +}; + +/* + * msp71xx_exd_gpio_get() - return the chip's gpio value + * @chip: chip structure which controls the specified gpio + * @offset: gpio whose value will be returned + * + * It will return 0 if gpio value is low and other if high. + */ +static int msp71xx_exd_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct msp71xx_exd_gpio_chip *msp71xx_chip = + to_msp71xx_exd_gpio_chip(chip); + const unsigned bit = MSP71XX_READ_OFFSET(offset); + + return __raw_readl(msp71xx_chip->reg) & (1 << bit); +} + +/* + * msp71xx_exd_gpio_set() - set the output value for the gpio + * @chip: chip structure who controls the specified gpio + * @offset: gpio whose value will be assigned + * @value: logic level to assign to the gpio initially + * + * This will set the gpio bit specified to the desired value. It will set the + * gpio pin low if value is 0 otherwise it will be high. + */ +static void msp71xx_exd_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct msp71xx_exd_gpio_chip *msp71xx_chip = + to_msp71xx_exd_gpio_chip(chip); + const unsigned bit = MSP71XX_DATA_OFFSET(offset); + + __raw_writel(1 << (bit + (value ? 1 : 0)), msp71xx_chip->reg); +} + +/* + * msp71xx_exd_direction_output() - declare the direction mode for a gpio + * @chip: chip structure which controls the specified gpio + * @offset: gpio whose value will be assigned + * @value: logic level to assign to the gpio initially + * + * This call will set the mode for the @gpio to output. It will set the + * gpio pin low if value is 0 otherwise it will be high. + */ +static int msp71xx_exd_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct msp71xx_exd_gpio_chip *msp71xx_chip = + to_msp71xx_exd_gpio_chip(chip); + + msp71xx_exd_gpio_set(chip, offset, value); + __raw_writel(1 << MSP71XX_CFG_OUT_OFFSET(offset), msp71xx_chip->reg); + return 0; +} + +/* + * msp71xx_exd_direction_input() - declare the direction mode for a gpio + * @chip: chip structure which controls the specified gpio + * @offset: gpio whose to which the value will be assigned + * + * This call will set the mode for the @gpio to input. + */ +static int msp71xx_exd_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct msp71xx_exd_gpio_chip *msp71xx_chip = + to_msp71xx_exd_gpio_chip(chip); + + __raw_writel(1 << MSP71XX_CFG_IN_OFFSET(offset), msp71xx_chip->reg); + return 0; +} + +#define MSP71XX_EXD_GPIO_BANK(name, exd_reg, base_gpio, num_gpio) \ +{ \ + .chip = { \ + .label = name, \ + .direction_input = msp71xx_exd_direction_input, \ + .direction_output = msp71xx_exd_direction_output, \ + .get = msp71xx_exd_gpio_get, \ + .set = msp71xx_exd_gpio_set, \ + .base = base_gpio, \ + .ngpio = num_gpio, \ + }, \ + .reg = (void __iomem *)(MSP71XX_EXD_GPIO_BASE + exd_reg), \ +} + +/* + * struct msp71xx_exd_gpio_banks[] - container array of gpio banks + * @chip: chip structure for the specified gpio bank + * @reg: register for reading and writing the gpio pin value + * + * This array structure defines the extended gpio banks for the + * PMC MIPS Processor. We specify the bank name, the data/config + * register,the base starting gpio number, and the number of + * gpios exposed by the bank of gpios. + */ +static struct msp71xx_exd_gpio_chip msp71xx_exd_gpio_banks[] = { + + MSP71XX_EXD_GPIO_BANK("GPIO_23_16", 0x188, 16, 8), + MSP71XX_EXD_GPIO_BANK("GPIO_27_24", 0x18C, 24, 4), +}; + +void __init msp71xx_init_gpio_extended(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(msp71xx_exd_gpio_banks); i++) + gpiochip_add(&msp71xx_exd_gpio_banks[i].chip); +} diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 82ab395efa33..31619c601b11 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -34,21 +34,11 @@ #include <asm/mach-rc32434/rb.h> #include <asm/mach-rc32434/integ.h> #include <asm/mach-rc32434/gpio.h> - -#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0) -#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1) -#define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9) -#define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10) +#include <asm/mach-rc32434/irq.h> #define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET) #define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET) -/* NAND definitions */ -#define GPIO_RDY (1 << 0x08) -#define GPIO_WPX (1 << 0x09) -#define GPIO_ALE (1 << 0x0a) -#define GPIO_CLE (1 << 0x0b) - static struct resource korina_dev0_res[] = { { .name = "korina_regs", @@ -94,15 +84,13 @@ static struct korina_device korina_dev0_data = { }; static struct platform_device korina_dev0 = { - .id = 0, + .id = -1, .name = "korina", .dev.platform_data = &korina_dev0_data, .resource = korina_dev0_res, .num_resources = ARRAY_SIZE(korina_dev0_res), }; -#define CF_GPIO_NUM 13 - static struct resource cf_slot0_res[] = { { .name = "cf_membase", @@ -116,11 +104,11 @@ static struct resource cf_slot0_res[] = { }; static struct cf_device cf_slot0_data = { - .gpio_pin = 13 + .gpio_pin = CF_GPIO_NUM }; static struct platform_device cf_slot0 = { - .id = 0, + .id = -1, .name = "pata-rb532-cf", .dev.platform_data = &cf_slot0_data, .resource = cf_slot0_res, @@ -185,7 +173,7 @@ static struct mtd_partition rb532_partition_info[] = { static struct platform_device rb532_led = { .name = "rb532-led", - .id = 0, + .id = -1, }; static struct gpio_keys_button rb532_gpio_btn[] = { diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index 00a1c7877bf4..76a7fd96d564 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -27,28 +27,31 @@ */ #include <linux/kernel.h> -#include <linux/gpio.h> #include <linux/init.h> #include <linux/types.h> -#include <linux/pci.h> #include <linux/spinlock.h> -#include <linux/io.h> #include <linux/platform_device.h> - -#include <asm/addrspace.h> +#include <linux/gpio.h> #include <asm/mach-rc32434/rb.h> - -struct rb532_gpio_reg __iomem *rb532_gpio_reg0; -EXPORT_SYMBOL(rb532_gpio_reg0); +#include <asm/mach-rc32434/gpio.h> + +struct rb532_gpio_chip { + struct gpio_chip chip; + void __iomem *regbase; + void (*set_int_level)(struct gpio_chip *chip, unsigned offset, int value); + int (*get_int_level)(struct gpio_chip *chip, unsigned offset); + void (*set_int_status)(struct gpio_chip *chip, unsigned offset, int value); + int (*get_int_status)(struct gpio_chip *chip, unsigned offset); +}; struct mpmc_device dev3; static struct resource rb532_gpio_reg0_res[] = { { .name = "gpio_reg0", - .start = (u32)(IDT434_REG_BASE + GPIOBASE), - .end = (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)), + .start = REGBASE + GPIOBASE, + .end = REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1, .flags = IORESOURCE_MEM, } }; @@ -56,8 +59,8 @@ static struct resource rb532_gpio_reg0_res[] = { static struct resource rb532_dev3_ctl_res[] = { { .name = "dev3_ctl", - .start = (u32)(IDT434_REG_BASE + DEV3BASE), - .end = (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)), + .start = REGBASE + DEV3BASE, + .end = REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1, .flags = IORESOURCE_MEM, } }; @@ -70,7 +73,7 @@ void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val) spin_lock_irqsave(&dev3.lock, flags); - data = *(volatile unsigned *) (IDT434_REG_BASE + reg_offs); + data = readl(IDT434_REG_BASE + reg_offs); for (i = 0; i != len; ++i) { if (val & (1 << i)) data |= (1 << (i + bit)); @@ -108,108 +111,199 @@ unsigned char get_latch_u5(void) } EXPORT_SYMBOL(get_latch_u5); -int rb532_gpio_get_value(unsigned gpio) +/* + * Return GPIO level */ +static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset) { - return readl(&rb532_gpio_reg0->gpiod) & (1 << gpio); + u32 mask = 1 << offset; + struct rb532_gpio_chip *gpch; + + gpch = container_of(chip, struct rb532_gpio_chip, chip); + return readl(gpch->regbase + GPIOD) & mask; } -EXPORT_SYMBOL(rb532_gpio_get_value); -void rb532_gpio_set_value(unsigned gpio, int value) +/* + * Set output GPIO level + */ +static void rb532_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) { - unsigned tmp; + unsigned long flags; + u32 mask = 1 << offset; + u32 tmp; + struct rb532_gpio_chip *gpch; + void __iomem *gpvr; - tmp = readl(&rb532_gpio_reg0->gpiod) & ~(1 << gpio); - if (value) - tmp |= 1 << gpio; + gpch = container_of(chip, struct rb532_gpio_chip, chip); + gpvr = gpch->regbase + GPIOD; - writel(tmp, (void *)&rb532_gpio_reg0->gpiod); + local_irq_save(flags); + tmp = readl(gpvr); + if (value) + tmp |= mask; + else + tmp &= ~mask; + writel(tmp, gpvr); + local_irq_restore(flags); } -EXPORT_SYMBOL(rb532_gpio_set_value); -int rb532_gpio_direction_input(unsigned gpio) +/* + * Set GPIO direction to input + */ +static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { - writel(readl(&rb532_gpio_reg0->gpiocfg) & ~(1 << gpio), - (void *)&rb532_gpio_reg0->gpiocfg); + unsigned long flags; + u32 mask = 1 << offset; + u32 value; + struct rb532_gpio_chip *gpch; + void __iomem *gpdr; - return 0; -} -EXPORT_SYMBOL(rb532_gpio_direction_input); + gpch = container_of(chip, struct rb532_gpio_chip, chip); + gpdr = gpch->regbase + GPIOCFG; -int rb532_gpio_direction_output(unsigned gpio, int value) -{ - gpio_set_value(gpio, value); - writel(readl(&rb532_gpio_reg0->gpiocfg) | (1 << gpio), - (void *)&rb532_gpio_reg0->gpiocfg); + local_irq_save(flags); + value = readl(gpdr); + value &= ~mask; + writel(value, gpdr); + local_irq_restore(flags); return 0; } -EXPORT_SYMBOL(rb532_gpio_direction_output); -void rb532_gpio_set_int_level(unsigned gpio, int value) +/* + * Set GPIO direction to output + */ +static int rb532_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) { - unsigned tmp; + unsigned long flags; + u32 mask = 1 << offset; + u32 tmp; + struct rb532_gpio_chip *gpch; + void __iomem *gpdr; + + gpch = container_of(chip, struct rb532_gpio_chip, chip); + writel(mask, gpch->regbase + GPIOD); + gpdr = gpch->regbase + GPIOCFG; + + local_irq_save(flags); + tmp = readl(gpdr); + tmp |= mask; + writel(tmp, gpdr); + local_irq_restore(flags); - tmp = readl(&rb532_gpio_reg0->gpioilevel) & ~(1 << gpio); - if (value) - tmp |= 1 << gpio; - writel(tmp, (void *)&rb532_gpio_reg0->gpioilevel); + return 0; } -EXPORT_SYMBOL(rb532_gpio_set_int_level); -int rb532_gpio_get_int_level(unsigned gpio) +/* + * Set the GPIO interrupt level + */ +static void rb532_gpio_set_int_level(struct gpio_chip *chip, + unsigned offset, int value) { - return readl(&rb532_gpio_reg0->gpioilevel) & (1 << gpio); -} -EXPORT_SYMBOL(rb532_gpio_get_int_level); + unsigned long flags; + u32 mask = 1 << offset; + u32 tmp; + struct rb532_gpio_chip *gpch; + void __iomem *gpil; -void rb532_gpio_set_int_status(unsigned gpio, int value) -{ - unsigned tmp; + gpch = container_of(chip, struct rb532_gpio_chip, chip); + gpil = gpch->regbase + GPIOILEVEL; - tmp = readl(&rb532_gpio_reg0->gpioistat); + local_irq_save(flags); + tmp = readl(gpil); if (value) - tmp |= 1 << gpio; - writel(tmp, (void *)&rb532_gpio_reg0->gpioistat); + tmp |= mask; + else + tmp &= ~mask; + writel(tmp, gpil); + local_irq_restore(flags); } -EXPORT_SYMBOL(rb532_gpio_set_int_status); -int rb532_gpio_get_int_status(unsigned gpio) +/* + * Get the GPIO interrupt level + */ +static int rb532_gpio_get_int_level(struct gpio_chip *chip, unsigned offset) { - return readl(&rb532_gpio_reg0->gpioistat) & (1 << gpio); + u32 mask = 1 << offset; + struct rb532_gpio_chip *gpch; + + gpch = container_of(chip, struct rb532_gpio_chip, chip); + return readl(gpch->regbase + GPIOILEVEL) & mask; } -EXPORT_SYMBOL(rb532_gpio_get_int_status); -void rb532_gpio_set_func(unsigned gpio, int value) +/* + * Set the GPIO interrupt status + */ +static void rb532_gpio_set_int_status(struct gpio_chip *chip, + unsigned offset, int value) { - unsigned tmp; + unsigned long flags; + u32 mask = 1 << offset; + u32 tmp; + struct rb532_gpio_chip *gpch; + void __iomem *gpis; + + gpch = container_of(chip, struct rb532_gpio_chip, chip); + gpis = gpch->regbase + GPIOISTAT; - tmp = readl(&rb532_gpio_reg0->gpiofunc); + local_irq_save(flags); + tmp = readl(gpis); if (value) - tmp |= 1 << gpio; - writel(tmp, (void *)&rb532_gpio_reg0->gpiofunc); + tmp |= mask; + else + tmp &= ~mask; + writel(tmp, gpis); + local_irq_restore(flags); } -EXPORT_SYMBOL(rb532_gpio_set_func); -int rb532_gpio_get_func(unsigned gpio) +/* + * Get the GPIO interrupt status + */ +static int rb532_gpio_get_int_status(struct gpio_chip *chip, unsigned offset) { - return readl(&rb532_gpio_reg0->gpiofunc) & (1 << gpio); + u32 mask = 1 << offset; + struct rb532_gpio_chip *gpch; + + gpch = container_of(chip, struct rb532_gpio_chip, chip); + return readl(gpch->regbase + GPIOISTAT) & mask; } -EXPORT_SYMBOL(rb532_gpio_get_func); + +static struct rb532_gpio_chip rb532_gpio_chip[] = { + [0] = { + .chip = { + .label = "gpio0", + .direction_input = rb532_gpio_direction_input, + .direction_output = rb532_gpio_direction_output, + .get = rb532_gpio_get, + .set = rb532_gpio_set, + .base = 0, + .ngpio = 32, + }, + .get_int_level = rb532_gpio_get_int_level, + .set_int_level = rb532_gpio_set_int_level, + .get_int_status = rb532_gpio_get_int_status, + .set_int_status = rb532_gpio_set_int_status, + }, +}; int __init rb532_gpio_init(void) { - rb532_gpio_reg0 = ioremap_nocache(rb532_gpio_reg0_res[0].start, - rb532_gpio_reg0_res[0].end - - rb532_gpio_reg0_res[0].start); + struct resource *r; - if (!rb532_gpio_reg0) { + r = rb532_gpio_reg0_res; + rb532_gpio_chip->regbase = ioremap_nocache(r->start, r->end - r->start); + + if (!rb532_gpio_chip->regbase) { printk(KERN_ERR "rb532: cannot remap GPIO register 0\n"); return -ENXIO; } - dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start, - rb532_dev3_ctl_res[0].end - - rb532_dev3_ctl_res[0].start); + /* Register our GPIO chip */ + gpiochip_add(&rb532_gpio_chip->chip); + + r = rb532_dev3_ctl_res; + dev3.base = ioremap_nocache(r->start, r->end - r->start); if (!dev3.base) { printk(KERN_ERR "rb532: cannot remap device controller 3\n"); diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c index c0d0f950caf2..549b46d2fcee 100644 --- a/arch/mips/rb532/irq.c +++ b/arch/mips/rb532/irq.c @@ -45,7 +45,7 @@ #include <asm/mipsregs.h> #include <asm/system.h> -#include <asm/mach-rc32434/rc32434.h> +#include <asm/mach-rc32434/irq.h> struct intr_group { u32 mask; /* mask of valid bits in pending/mask registers */ diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c index 1bc0af8febf4..46ca24dbcc2d 100644 --- a/arch/mips/rb532/prom.c +++ b/arch/mips/rb532/prom.c @@ -37,12 +37,8 @@ #include <asm/mach-rc32434/ddr.h> #include <asm/mach-rc32434/prom.h> -extern void __init setup_serial_port(void); - unsigned int idt_cpu_freq = 132000000; EXPORT_SYMBOL(idt_cpu_freq); -unsigned int gpio_bootup_state; -EXPORT_SYMBOL(gpio_bootup_state); static struct resource ddr_reg[] = { { @@ -108,9 +104,6 @@ void __init prom_setup_cmdline(void) mips_machtype = MACH_MIKROTIK_RB532; } - if (match_tag(prom_argv[i], GPIO_TAG)) - gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG); - strcpy(cp, prom_argv[i]); cp += strlen(prom_argv[i]); } @@ -122,11 +115,6 @@ void __init prom_setup_cmdline(void) strcpy(cp, arcs_cmdline); cp += strlen(arcs_cmdline); } - if (gpio_bootup_state & 0x02) - strcpy(cp, GPIO_INIT_NOBUTTON); - else - strcpy(cp, GPIO_INIT_BUTTON); - cmd_line[CL_SIZE-1] = '\0'; strcpy(arcs_cmdline, cmd_line); diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c index 1a05b5ddee09..3e0d7ec3a579 100644 --- a/arch/mips/rb532/serial.c +++ b/arch/mips/rb532/serial.c @@ -31,16 +31,16 @@ #include <linux/serial_8250.h> #include <asm/serial.h> -#include <asm/mach-rc32434/rc32434.h> +#include <asm/mach-rc32434/rb.h> extern unsigned int idt_cpu_freq; static struct uart_port rb532_uart = { .type = PORT_16550A, .line = 0, - .irq = RC32434_UART0_IRQ, + .irq = UART0_IRQ, .iotype = UPIO_MEM, - .membase = (char *)KSEG1ADDR(RC32434_UART0_BASE), + .membase = (char *)KSEG1ADDR(REGBASE + UART0BASE), .regshift = 2 }; diff --git a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c index 7aafa95ac20b..50f530f5b602 100644 --- a/arch/mips/rb532/setup.c +++ b/arch/mips/rb532/setup.c @@ -9,7 +9,7 @@ #include <asm/time.h> #include <linux/ioport.h> -#include <asm/mach-rc32434/rc32434.h> +#include <asm/mach-rc32434/rb.h> #include <asm/mach-rc32434/pci.h> struct pci_reg __iomem *pci_reg; @@ -27,7 +27,7 @@ static struct resource pci0_res[] = { static void rb_machine_restart(char *command) { /* just jump to the reset vector */ - writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST)); + writel(0x80000001, IDT434_REG_BASE + RST); ((void (*)(void)) KSEG1ADDR(0x1FC00000u))(); } diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile index f18ba9201bbc..7b45f199d92a 100644 --- a/arch/mips/sibyte/swarm/Makefile +++ b/arch/mips/sibyte/swarm/Makefile @@ -1,3 +1,4 @@ -obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o +obj-y := platform.o setup.o rtc_xicor1241.o \ + rtc_m41t81.o obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c new file mode 100644 index 000000000000..54847fe1e564 --- /dev/null +++ b/arch/mips/sibyte/swarm/platform.c @@ -0,0 +1,85 @@ +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> + +#include <asm/sibyte/board.h> +#include <asm/sibyte/sb1250_genbus.h> +#include <asm/sibyte/sb1250_regs.h> + +#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR) + +#define DRV_NAME "pata-swarm" + +#define SWARM_IDE_SHIFT 5 +#define SWARM_IDE_BASE 0x1f0 +#define SWARM_IDE_CTRL 0x3f6 + +static struct resource swarm_pata_resource[] = { + { + .name = "Swarm GenBus IDE", + .flags = IORESOURCE_MEM, + }, { + .name = "Swarm GenBus IDE", + .flags = IORESOURCE_MEM, + }, { + .name = "Swarm GenBus IDE", + .flags = IORESOURCE_IRQ, + .start = K_INT_GB_IDE, + .end = K_INT_GB_IDE, + }, +}; + +static struct pata_platform_info pata_platform_data = { + .ioport_shift = SWARM_IDE_SHIFT, +}; + +static struct platform_device swarm_pata_device = { + .name = "pata_platform", + .id = -1, + .resource = swarm_pata_resource, + .num_resources = ARRAY_SIZE(swarm_pata_resource), + .dev = { + .platform_data = &pata_platform_data, + .coherent_dma_mask = ~0, /* grumble */ + }, +}; + +static int __init swarm_pata_init(void) +{ + u8 __iomem *base; + phys_t offset, size; + struct resource *r; + + if (!SIBYTE_HAVE_IDE) + return -ENODEV; + + base = ioremap(A_IO_EXT_BASE, 0x800); + offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); + size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); + iounmap(base); + + offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE; + size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE; + if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) { + pr_info(DRV_NAME ": PATA interface at GenBus disabled\n"); + + return -EBUSY; + } + + pr_info(DRV_NAME ": PATA interface at GenBus slot %i\n", IDE_CS); + + r = swarm_pata_resource; + r[0].start = offset + (SWARM_IDE_BASE << SWARM_IDE_SHIFT); + r[0].end = offset + ((SWARM_IDE_BASE + 8) << SWARM_IDE_SHIFT) - 1; + r[1].start = offset + (SWARM_IDE_CTRL << SWARM_IDE_SHIFT); + r[1].end = offset + ((SWARM_IDE_CTRL + 1) << SWARM_IDE_SHIFT) - 1; + + return platform_device_register(&swarm_pata_device); +} + +device_initcall(swarm_pata_init); + +#endif /* defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR) */ diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 840fe757c48d..17052db4161d 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -45,6 +45,14 @@ config TOSHIBA_RBTX4938 This Toshiba board is based on the TX4938 processor. Say Y here to support this machine type +config TOSHIBA_RBTX4939 + bool "Toshiba RBTX4939 bobard" + depends on MACH_TX49XX + select SOC_TX4939 + help + This Toshiba board is based on the TX4939 processor. Say Y here to + support this machine type + config SOC_TX3927 bool select CEVT_TXX9 @@ -71,6 +79,13 @@ config SOC_TX4938 select PCI_TX4927 select GPIO_TXX9 +config SOC_TX4939 + bool + select CEVT_TXX9 + select HAS_TXX9_SERIAL + select HW_HAS_PCI + select PCI_TX4927 + config TOSHIBA_FPCIB0 bool "FPCIB0 Backplane Support" depends on PCI && MACH_TXX9 @@ -94,16 +109,11 @@ config TOSHIBA_RBTX4938_MPLEX_NAND bool "NAND" config TOSHIBA_RBTX4938_MPLEX_ATA bool "ATA" +config TOSHIBA_RBTX4938_MPLEX_KEEP + bool "Keep firmware settings" endchoice -config TX4938_NAND_BOOT - depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND - bool "NAND Boot Support (EXPERIMENTAL)" - help - This is only for Toshiba RBTX4938 reference board, which has NAND IPL. - Select this option if you need to use NAND boot. - endif config PCI_TX4927 diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile index 9bb34af26b73..0030d23bef5b 100644 --- a/arch/mips/txx9/generic/Makefile +++ b/arch/mips/txx9/generic/Makefile @@ -7,6 +7,8 @@ obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_SOC_TX3927) += setup_tx3927.o irq_tx3927.o obj-$(CONFIG_SOC_TX4927) += mem_tx4927.o setup_tx4927.o irq_tx4927.o obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o +obj-$(CONFIG_SOC_TX4939) += setup_tx4939.o irq_tx4939.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o +obj-$(CONFIG_SPI) += spi_eeprom.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/generic/irq_tx4927.c b/arch/mips/txx9/generic/irq_tx4927.c index cbea1fdde82b..ad2870def8f1 100644 --- a/arch/mips/txx9/generic/irq_tx4927.c +++ b/arch/mips/txx9/generic/irq_tx4927.c @@ -30,8 +30,19 @@ void __init tx4927_irq_init(void) { + int i; + mips_cpu_irq_init(); txx9_irq_init(TX4927_IRC_REG & 0xfffffffffULL); set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4927_IRC_INT, handle_simple_irq); + /* raise priority for errors, timers, SIO */ + txx9_irq_set_pri(TX4927_IR_ECCERR, 7); + txx9_irq_set_pri(TX4927_IR_WTOERR, 7); + txx9_irq_set_pri(TX4927_IR_PCIERR, 7); + txx9_irq_set_pri(TX4927_IR_PCIPME, 7); + for (i = 0; i < TX4927_NUM_IR_TMR; i++) + txx9_irq_set_pri(TX4927_IR_TMR(i), 6); + for (i = 0; i < TX4927_NUM_IR_SIO; i++) + txx9_irq_set_pri(TX4927_IR_SIO(i), 5); } diff --git a/arch/mips/txx9/generic/irq_tx4938.c b/arch/mips/txx9/generic/irq_tx4938.c index 6eac684bf190..025ae11359a8 100644 --- a/arch/mips/txx9/generic/irq_tx4938.c +++ b/arch/mips/txx9/generic/irq_tx4938.c @@ -18,8 +18,19 @@ void __init tx4938_irq_init(void) { + int i; + mips_cpu_irq_init(); txx9_irq_init(TX4938_IRC_REG & 0xfffffffffULL); set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4938_IRC_INT, handle_simple_irq); + /* raise priority for errors, timers, SIO */ + txx9_irq_set_pri(TX4938_IR_ECCERR, 7); + txx9_irq_set_pri(TX4938_IR_WTOERR, 7); + txx9_irq_set_pri(TX4938_IR_PCIERR, 7); + txx9_irq_set_pri(TX4938_IR_PCIPME, 7); + for (i = 0; i < TX4938_NUM_IR_TMR; i++) + txx9_irq_set_pri(TX4938_IR_TMR(i), 6); + for (i = 0; i < TX4938_NUM_IR_SIO; i++) + txx9_irq_set_pri(TX4938_IR_SIO(i), 5); } diff --git a/arch/mips/txx9/generic/irq_tx4939.c b/arch/mips/txx9/generic/irq_tx4939.c new file mode 100644 index 000000000000..013213a8706b --- /dev/null +++ b/arch/mips/txx9/generic/irq_tx4939.c @@ -0,0 +1,215 @@ +/* + * TX4939 irq routines + * Based on linux/arch/mips/kernel/irq_txx9.c, + * and RBTX49xx patch from CELF patch archive. + * + * Copyright 2001, 2003-2005 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ahennessy@mvista.com + * source@mvista.com + * Copyright (C) 2000-2001,2005-2007 Toshiba Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +/* + * TX4939 defines 64 IRQs. + * Similer to irq_txx9.c but different register layouts. + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/types.h> +#include <asm/irq_cpu.h> +#include <asm/txx9irq.h> +#include <asm/txx9/tx4939.h> + +/* IRCER : Int. Control Enable */ +#define TXx9_IRCER_ICE 0x00000001 + +/* IRCR : Int. Control */ +#define TXx9_IRCR_LOW 0x00000000 +#define TXx9_IRCR_HIGH 0x00000001 +#define TXx9_IRCR_DOWN 0x00000002 +#define TXx9_IRCR_UP 0x00000003 +#define TXx9_IRCR_EDGE(cr) ((cr) & 0x00000002) + +/* IRSCR : Int. Status Control */ +#define TXx9_IRSCR_EIClrE 0x00000100 +#define TXx9_IRSCR_EIClr_MASK 0x0000000f + +/* IRCSR : Int. Current Status */ +#define TXx9_IRCSR_IF 0x00010000 + +#define irc_dlevel 0 +#define irc_elevel 1 + +static struct { + unsigned char level; + unsigned char mode; +} tx4939irq[TX4939_NUM_IR] __read_mostly; + +static void tx4939_irq_unmask(unsigned int irq) +{ + unsigned int irq_nr = irq - TXX9_IRQ_BASE; + u32 __iomem *lvlp; + int ofs; + if (irq_nr < 32) { + irq_nr--; + lvlp = &tx4939_ircptr->lvl[(irq_nr % 16) / 2].r; + } else { + irq_nr -= 32; + lvlp = &tx4939_ircptr->lvl[8 + (irq_nr % 16) / 2].r; + } + ofs = (irq_nr & 16) + (irq_nr & 1) * 8; + __raw_writel((__raw_readl(lvlp) & ~(0xff << ofs)) + | (tx4939irq[irq_nr].level << ofs), + lvlp); +} + +static inline void tx4939_irq_mask(unsigned int irq) +{ + unsigned int irq_nr = irq - TXX9_IRQ_BASE; + u32 __iomem *lvlp; + int ofs; + if (irq_nr < 32) { + irq_nr--; + lvlp = &tx4939_ircptr->lvl[(irq_nr % 16) / 2].r; + } else { + irq_nr -= 32; + lvlp = &tx4939_ircptr->lvl[8 + (irq_nr % 16) / 2].r; + } + ofs = (irq_nr & 16) + (irq_nr & 1) * 8; + __raw_writel((__raw_readl(lvlp) & ~(0xff << ofs)) + | (irc_dlevel << ofs), + lvlp); + mmiowb(); +} + +static void tx4939_irq_mask_ack(unsigned int irq) +{ + unsigned int irq_nr = irq - TXX9_IRQ_BASE; + + tx4939_irq_mask(irq); + if (TXx9_IRCR_EDGE(tx4939irq[irq_nr].mode)) { + irq_nr--; + /* clear edge detection */ + __raw_writel((TXx9_IRSCR_EIClrE | (irq_nr & 0xf)) + << (irq_nr & 0x10), + &tx4939_ircptr->edc.r); + } +} + +static int tx4939_irq_set_type(unsigned int irq, unsigned int flow_type) +{ + unsigned int irq_nr = irq - TXX9_IRQ_BASE; + u32 cr; + u32 __iomem *crp; + int ofs; + int mode; + + if (flow_type & IRQF_TRIGGER_PROBE) + return 0; + switch (flow_type & IRQF_TRIGGER_MASK) { + case IRQF_TRIGGER_RISING: + mode = TXx9_IRCR_UP; + break; + case IRQF_TRIGGER_FALLING: + mode = TXx9_IRCR_DOWN; + break; + case IRQF_TRIGGER_HIGH: + mode = TXx9_IRCR_HIGH; + break; + case IRQF_TRIGGER_LOW: + mode = TXx9_IRCR_LOW; + break; + default: + return -EINVAL; + } + if (irq_nr < 32) { + irq_nr--; + crp = &tx4939_ircptr->dm[(irq_nr & 8) >> 3].r; + } else { + irq_nr -= 32; + crp = &tx4939_ircptr->dm2[((irq_nr & 8) >> 3)].r; + } + ofs = (((irq_nr & 16) >> 1) | (irq_nr & (8 - 1))) * 2; + cr = __raw_readl(crp); + cr &= ~(0x3 << ofs); + cr |= (mode & 0x3) << ofs; + __raw_writel(cr, crp); + tx4939irq[irq_nr].mode = mode; + return 0; +} + +static struct irq_chip tx4939_irq_chip = { + .name = "TX4939", + .ack = tx4939_irq_mask_ack, + .mask = tx4939_irq_mask, + .mask_ack = tx4939_irq_mask_ack, + .unmask = tx4939_irq_unmask, + .set_type = tx4939_irq_set_type, +}; + +static int tx4939_irq_set_pri(int irc_irq, int new_pri) +{ + int old_pri; + + if ((unsigned int)irc_irq >= TX4939_NUM_IR) + return 0; + old_pri = tx4939irq[irc_irq].level; + tx4939irq[irc_irq].level = new_pri; + return old_pri; +} + +void __init tx4939_irq_init(void) +{ + int i; + + mips_cpu_irq_init(); + /* disable interrupt control */ + __raw_writel(0, &tx4939_ircptr->den.r); + __raw_writel(0, &tx4939_ircptr->maskint.r); + __raw_writel(0, &tx4939_ircptr->maskext.r); + /* irq_base + 0 is not used */ + for (i = 1; i < TX4939_NUM_IR; i++) { + tx4939irq[i].level = 4; /* middle level */ + tx4939irq[i].mode = TXx9_IRCR_LOW; + set_irq_chip_and_handler(TXX9_IRQ_BASE + i, + &tx4939_irq_chip, handle_level_irq); + } + + /* mask all IRC interrupts */ + __raw_writel(0, &tx4939_ircptr->msk.r); + for (i = 0; i < 16; i++) + __raw_writel(0, &tx4939_ircptr->lvl[i].r); + /* setup IRC interrupt mode (Low Active) */ + for (i = 0; i < 2; i++) + __raw_writel(0, &tx4939_ircptr->dm[i].r); + for (i = 0; i < 2; i++) + __raw_writel(0, &tx4939_ircptr->dm2[i].r); + /* enable interrupt control */ + __raw_writel(TXx9_IRCER_ICE, &tx4939_ircptr->den.r); + __raw_writel(irc_elevel, &tx4939_ircptr->msk.r); + + set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4939_IRC_INT, + handle_simple_irq); + + /* raise priority for errors, timers, sio */ + tx4939_irq_set_pri(TX4939_IR_WTOERR, 7); + tx4939_irq_set_pri(TX4939_IR_PCIERR, 7); + tx4939_irq_set_pri(TX4939_IR_PCIPME, 7); + for (i = 0; i < TX4939_NUM_IR_TMR; i++) + tx4939_irq_set_pri(TX4939_IR_TMR(i), 6); + for (i = 0; i < TX4939_NUM_IR_SIO; i++) + tx4939_irq_set_pri(TX4939_IR_SIO(i), 5); +} + +int tx4939_irq(void) +{ + u32 csr = __raw_readl(&tx4939_ircptr->cs.r); + + if (likely(!(csr & TXx9_IRCSR_IF))) + return TXX9_IRQ_BASE + (csr & (TX4939_NUM_IR - 1)); + return -1; +} diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index fe6bee09cece..5526375010f8 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -22,11 +22,16 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/mtd/physmap.h> +#include <linux/leds.h> #include <asm/bootinfo.h> #include <asm/time.h> #include <asm/reboot.h> +#include <asm/r4kcache.h> +#include <asm/sections.h> #include <asm/txx9/generic.h> #include <asm/txx9/pci.h> +#include <asm/txx9tmr.h> #ifdef CONFIG_CPU_TX49XX #include <asm/txx9/tx4938.h> #endif @@ -67,7 +72,12 @@ unsigned int txx9_master_clock; unsigned int txx9_cpu_clock; unsigned int txx9_gbus_clock; +#ifdef CONFIG_CPU_TX39XX +/* don't enable by default - see errata */ +int txx9_ccfg_toeon __initdata; +#else int txx9_ccfg_toeon __initdata = 1; +#endif /* Minimum CLK support */ @@ -119,39 +129,232 @@ int irq_to_gpio(unsigned irq) EXPORT_SYMBOL(irq_to_gpio); #endif -extern struct txx9_board_vec jmr3927_vec; -extern struct txx9_board_vec rbtx4927_vec; -extern struct txx9_board_vec rbtx4937_vec; -extern struct txx9_board_vec rbtx4938_vec; +#define BOARD_VEC(board) extern struct txx9_board_vec board; +#include <asm/txx9/boards.h> +#undef BOARD_VEC struct txx9_board_vec *txx9_board_vec __initdata; static char txx9_system_type[32]; -void __init prom_init_cmdline(void) +static struct txx9_board_vec *board_vecs[] __initdata = { +#define BOARD_VEC(board) &board, +#include <asm/txx9/boards.h> +#undef BOARD_VEC +}; + +static struct txx9_board_vec *__init find_board_byname(const char *name) +{ + int i; + + /* search board_vecs table */ + for (i = 0; i < ARRAY_SIZE(board_vecs); i++) { + if (strstr(board_vecs[i]->system, name)) + return board_vecs[i]; + } + return NULL; +} + +static void __init prom_init_cmdline(void) { int argc = (int)fw_arg0; - char **argv = (char **)fw_arg1; + int *argv32 = (int *)fw_arg1; int i; /* Always ignore the "-c" at argv[0] */ -#ifdef CONFIG_64BIT - char *fixed_argv[32]; - for (i = 0; i < argc; i++) - fixed_argv[i] = (char *)(long)(*((__s32 *)argv + i)); - argv = fixed_argv; -#endif + char builtin[CL_SIZE]; /* ignore all built-in args if any f/w args given */ - if (argc > 1) - *arcs_cmdline = '\0'; + /* + * But if built-in strings was started with '+', append them + * to command line args. If built-in was started with '-', + * ignore all f/w args. + */ + builtin[0] = '\0'; + if (arcs_cmdline[0] == '+') + strcpy(builtin, arcs_cmdline + 1); + else if (arcs_cmdline[0] == '-') { + strcpy(builtin, arcs_cmdline + 1); + argc = 0; + } else if (argc <= 1) + strcpy(builtin, arcs_cmdline); + arcs_cmdline[0] = '\0'; for (i = 1; i < argc; i++) { + char *str = (char *)(long)argv32[i]; if (i != 1) strcat(arcs_cmdline, " "); - strcat(arcs_cmdline, argv[i]); + if (strchr(str, ' ')) { + strcat(arcs_cmdline, "\""); + strcat(arcs_cmdline, str); + strcat(arcs_cmdline, "\""); + } else + strcat(arcs_cmdline, str); + } + /* append saved builtin args */ + if (builtin[0]) { + if (arcs_cmdline[0]) + strcat(arcs_cmdline, " "); + strcat(arcs_cmdline, builtin); } } -void __init prom_init(void) +static int txx9_ic_disable __initdata; +static int txx9_dc_disable __initdata; + +#if defined(CONFIG_CPU_TX49XX) +/* flush all cache on very early stage (before 4k_cache_init) */ +static void __init early_flush_dcache(void) { + unsigned int conf = read_c0_config(); + unsigned int dc_size = 1 << (12 + ((conf & CONF_DC) >> 6)); + unsigned int linesz = 32; + unsigned long addr, end; + + end = INDEX_BASE + dc_size / 4; + /* 4way, waybit=0 */ + for (addr = INDEX_BASE; addr < end; addr += linesz) { + cache_op(Index_Writeback_Inv_D, addr | 0); + cache_op(Index_Writeback_Inv_D, addr | 1); + cache_op(Index_Writeback_Inv_D, addr | 2); + cache_op(Index_Writeback_Inv_D, addr | 3); + } +} + +static void __init txx9_cache_fixup(void) +{ + unsigned int conf; + + conf = read_c0_config(); + /* flush and disable */ + if (txx9_ic_disable) { + conf |= TX49_CONF_IC; + write_c0_config(conf); + } + if (txx9_dc_disable) { + early_flush_dcache(); + conf |= TX49_CONF_DC; + write_c0_config(conf); + } + + /* enable cache */ + conf = read_c0_config(); + if (!txx9_ic_disable) + conf &= ~TX49_CONF_IC; + if (!txx9_dc_disable) + conf &= ~TX49_CONF_DC; + write_c0_config(conf); + + if (conf & TX49_CONF_IC) + pr_info("TX49XX I-Cache disabled.\n"); + if (conf & TX49_CONF_DC) + pr_info("TX49XX D-Cache disabled.\n"); +} +#elif defined(CONFIG_CPU_TX39XX) +/* flush all cache on very early stage (before tx39_cache_init) */ +static void __init early_flush_dcache(void) +{ + unsigned int conf = read_c0_config(); + unsigned int dc_size = 1 << (10 + ((conf & TX39_CONF_DCS_MASK) >> + TX39_CONF_DCS_SHIFT)); + unsigned int linesz = 16; + unsigned long addr, end; + + end = INDEX_BASE + dc_size / 2; + /* 2way, waybit=0 */ + for (addr = INDEX_BASE; addr < end; addr += linesz) { + cache_op(Index_Writeback_Inv_D, addr | 0); + cache_op(Index_Writeback_Inv_D, addr | 1); + } +} + +static void __init txx9_cache_fixup(void) +{ + unsigned int conf; + + conf = read_c0_config(); + /* flush and disable */ + if (txx9_ic_disable) { + conf &= ~TX39_CONF_ICE; + write_c0_config(conf); + } + if (txx9_dc_disable) { + early_flush_dcache(); + conf &= ~TX39_CONF_DCE; + write_c0_config(conf); + } + + /* enable cache */ + conf = read_c0_config(); + if (!txx9_ic_disable) + conf |= TX39_CONF_ICE; + if (!txx9_dc_disable) + conf |= TX39_CONF_DCE; + write_c0_config(conf); + + if (!(conf & TX39_CONF_ICE)) + pr_info("TX39XX I-Cache disabled.\n"); + if (!(conf & TX39_CONF_DCE)) + pr_info("TX39XX D-Cache disabled.\n"); +} +#else +static inline void txx9_cache_fixup(void) +{ +} +#endif + +static void __init preprocess_cmdline(void) +{ + char cmdline[CL_SIZE]; + char *s; + + strcpy(cmdline, arcs_cmdline); + s = cmdline; + arcs_cmdline[0] = '\0'; + while (s && *s) { + char *str = strsep(&s, " "); + if (strncmp(str, "board=", 6) == 0) { + txx9_board_vec = find_board_byname(str + 6); + continue; + } else if (strncmp(str, "masterclk=", 10) == 0) { + unsigned long val; + if (strict_strtoul(str + 10, 10, &val) == 0) + txx9_master_clock = val; + continue; + } else if (strcmp(str, "icdisable") == 0) { + txx9_ic_disable = 1; + continue; + } else if (strcmp(str, "dcdisable") == 0) { + txx9_dc_disable = 1; + continue; + } else if (strcmp(str, "toeoff") == 0) { + txx9_ccfg_toeon = 0; + continue; + } else if (strcmp(str, "toeon") == 0) { + txx9_ccfg_toeon = 1; + continue; + } + if (arcs_cmdline[0]) + strcat(arcs_cmdline, " "); + strcat(arcs_cmdline, str); + } + + txx9_cache_fixup(); +} + +static void __init select_board(void) +{ + const char *envstr; + + /* first, determine by "board=" argument in preprocess_cmdline() */ + if (txx9_board_vec) + return; + /* next, determine by "board" envvar */ + envstr = prom_getenv("board"); + if (envstr) { + txx9_board_vec = find_board_byname(envstr); + if (txx9_board_vec) + return; + } + + /* select "default" board */ #ifdef CONFIG_CPU_TX39XX txx9_board_vec = &jmr3927_vec; #endif @@ -170,8 +373,20 @@ void __init prom_init(void) txx9_board_vec = &rbtx4938_vec; break; #endif +#ifdef CONFIG_TOSHIBA_RBTX4939 + case 0x4939: + txx9_board_vec = &rbtx4939_vec; + break; +#endif } #endif +} + +void __init prom_init(void) +{ + prom_init_cmdline(); + preprocess_cmdline(); + select_board(); strcpy(txx9_system_type, txx9_board_vec->system); @@ -180,6 +395,11 @@ void __init prom_init(void) void __init prom_free_prom_memory(void) { + unsigned long saddr = PAGE_SIZE; + unsigned long eaddr = __pa_symbol(&_text); + + if (saddr < eaddr) + free_init_pages("prom memory", saddr, eaddr); } const char *get_system_type(void) @@ -192,6 +412,21 @@ char * __init prom_getcmdline(void) return &(arcs_cmdline[0]); } +const char *__init prom_getenv(const char *name) +{ + const s32 *str = (const s32 *)fw_arg2; + + if (!str) + return NULL; + /* YAMON style ("name", "value" pairs) */ + while (str[0] && str[1]) { + if (!strcmp((const char *)(unsigned long)str[0], name)) + return (const char *)(unsigned long)str[1]; + str += 2; + } + return NULL; +} + static void __noreturn txx9_machine_halt(void) { local_irq_disable(); @@ -222,6 +457,20 @@ void __init txx9_wdt_init(unsigned long base) platform_device_register_simple("txx9wdt", -1, &res, 1); } +void txx9_wdt_now(unsigned long base) +{ + struct txx9_tmr_reg __iomem *tmrptr = + ioremap(base, sizeof(struct txx9_tmr_reg)); + /* disable watch dog timer */ + __raw_writel(TXx9_TMWTMR_WDIS | TXx9_TMWTMR_TWC, &tmrptr->wtmr); + __raw_writel(0, &tmrptr->tcr); + /* kick watchdog */ + __raw_writel(TXx9_TMWTMR_TWIE, &tmrptr->wtmr); + __raw_writel(1, &tmrptr->cpra); /* immediate */ + __raw_writel(TXx9_TMTCR_TCE | TXx9_TMTCR_CCDE | TXx9_TMTCR_TMODE_WDOG, + &tmrptr->tcr); +} + /* SPI support */ void __init txx9_spi_init(int busid, unsigned long base, int irq) { @@ -372,3 +621,153 @@ static unsigned long __swizzle_addr_none(unsigned long port) unsigned long (*__swizzle_addr_b)(unsigned long port) = __swizzle_addr_none; EXPORT_SYMBOL(__swizzle_addr_b); #endif + +void __init txx9_physmap_flash_init(int no, unsigned long addr, + unsigned long size, + const struct physmap_flash_data *pdata) +{ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) + struct resource res = { + .start = addr, + .end = addr + size - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *pdev; +#ifdef CONFIG_MTD_PARTITIONS + static struct mtd_partition parts[2]; + struct physmap_flash_data pdata_part; + + /* If this area contained boot area, make separate partition */ + if (pdata->nr_parts == 0 && !pdata->parts && + addr < 0x1fc00000 && addr + size > 0x1fc00000 && + !parts[0].name) { + parts[0].name = "boot"; + parts[0].offset = 0x1fc00000 - addr; + parts[0].size = addr + size - 0x1fc00000; + parts[1].name = "user"; + parts[1].offset = 0; + parts[1].size = 0x1fc00000 - addr; + pdata_part = *pdata; + pdata_part.nr_parts = ARRAY_SIZE(parts); + pdata_part.parts = parts; + pdata = &pdata_part; + } +#endif + pdev = platform_device_alloc("physmap-flash", no); + if (!pdev || + platform_device_add_resources(pdev, &res, 1) || + platform_device_add_data(pdev, pdata, sizeof(*pdata)) || + platform_device_add(pdev)) + platform_device_put(pdev); +#endif +} + +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +static DEFINE_SPINLOCK(txx9_iocled_lock); + +#define TXX9_IOCLED_MAXLEDS 8 + +struct txx9_iocled_data { + struct gpio_chip chip; + u8 cur_val; + void __iomem *mmioaddr; + struct gpio_led_platform_data pdata; + struct gpio_led leds[TXX9_IOCLED_MAXLEDS]; + char names[TXX9_IOCLED_MAXLEDS][32]; +}; + +static int txx9_iocled_get(struct gpio_chip *chip, unsigned int offset) +{ + struct txx9_iocled_data *data = + container_of(chip, struct txx9_iocled_data, chip); + return data->cur_val & (1 << offset); +} + +static void txx9_iocled_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct txx9_iocled_data *data = + container_of(chip, struct txx9_iocled_data, chip); + unsigned long flags; + spin_lock_irqsave(&txx9_iocled_lock, flags); + if (value) + data->cur_val |= 1 << offset; + else + data->cur_val &= ~(1 << offset); + writeb(data->cur_val, data->mmioaddr); + mmiowb(); + spin_unlock_irqrestore(&txx9_iocled_lock, flags); +} + +static int txx9_iocled_dir_in(struct gpio_chip *chip, unsigned int offset) +{ + return 0; +} + +static int txx9_iocled_dir_out(struct gpio_chip *chip, unsigned int offset, + int value) +{ + txx9_iocled_set(chip, offset, value); + return 0; +} + +void __init txx9_iocled_init(unsigned long baseaddr, + int basenum, unsigned int num, int lowactive, + const char *color, char **deftriggers) +{ + struct txx9_iocled_data *iocled; + struct platform_device *pdev; + int i; + static char *default_triggers[] __initdata = { + "heartbeat", + "ide-disk", + "nand-disk", + NULL, + }; + + if (!deftriggers) + deftriggers = default_triggers; + iocled = kzalloc(sizeof(*iocled), GFP_KERNEL); + if (!iocled) + return; + iocled->mmioaddr = ioremap(baseaddr, 1); + if (!iocled->mmioaddr) + return; + iocled->chip.get = txx9_iocled_get; + iocled->chip.set = txx9_iocled_set; + iocled->chip.direction_input = txx9_iocled_dir_in; + iocled->chip.direction_output = txx9_iocled_dir_out; + iocled->chip.label = "iocled"; + iocled->chip.base = basenum; + iocled->chip.ngpio = num; + if (gpiochip_add(&iocled->chip)) + return; + if (basenum < 0) + basenum = iocled->chip.base; + + pdev = platform_device_alloc("leds-gpio", basenum); + if (!pdev) + return; + iocled->pdata.num_leds = num; + iocled->pdata.leds = iocled->leds; + for (i = 0; i < num; i++) { + struct gpio_led *led = &iocled->leds[i]; + snprintf(iocled->names[i], sizeof(iocled->names[i]), + "iocled:%s:%u", color, i); + led->name = iocled->names[i]; + led->gpio = basenum + i; + led->active_low = lowactive; + if (deftriggers && *deftriggers) + led->default_trigger = *deftriggers++; + } + pdev->dev.platform_data = &iocled->pdata; + if (platform_device_add(pdev)) + platform_device_put(pdev); +} +#else /* CONFIG_LEDS_GPIO */ +void __init txx9_iocled_init(unsigned long baseaddr, + int basenum, unsigned int num, int lowactive, + const char *color, char **deftriggers) +{ +} +#endif /* CONFIG_LEDS_GPIO */ diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c index 7bd963d37fc3..9505d58454c8 100644 --- a/arch/mips/txx9/generic/setup_tx3927.c +++ b/arch/mips/txx9/generic/setup_tx3927.c @@ -15,6 +15,7 @@ #include <linux/delay.h> #include <linux/param.h> #include <linux/io.h> +#include <linux/mtd/physmap.h> #include <asm/mipsregs.h> #include <asm/txx9irq.h> #include <asm/txx9tmr.h> @@ -32,11 +33,6 @@ void __init tx3927_setup(void) int i; unsigned int conf; - /* don't enable - see errata */ - txx9_ccfg_toeon = 0; - if (strstr(prom_getcmdline(), "toeon") != NULL) - txx9_ccfg_toeon = 1; - txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE, TX3927_REG_SIZE); @@ -99,16 +95,14 @@ void __init tx3927_setup(void) txx9_gpio_init(TX3927_PIO_REG, 0, 16); conf = read_c0_conf(); - if (!(conf & TX39_CONF_ICE)) - printk(KERN_INFO "TX3927 I-Cache disabled.\n"); - if (!(conf & TX39_CONF_DCE)) - printk(KERN_INFO "TX3927 D-Cache disabled.\n"); - else if (!(conf & TX39_CONF_WBON)) - printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n"); - else if (!(conf & TX39_CONF_CWFON)) - printk(KERN_INFO "TX3927 D-Cache WriteBack.\n"); - else - printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n"); + if (conf & TX39_CONF_DCE) { + if (!(conf & TX39_CONF_WBON)) + pr_info("TX3927 D-Cache WriteThrough.\n"); + else if (!(conf & TX39_CONF_CWFON)) + pr_info("TX3927 D-Cache WriteBack.\n"); + else + pr_info("TX3927 D-Cache WriteBack (CWF) .\n"); + } } void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr) @@ -128,3 +122,16 @@ void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask) TXX9_IRQ_BASE + TX3927_IR_SIO(i), i, sclk, (1 << i) & cts_mask); } + +void __init tx3927_mtd_init(int ch) +{ + struct physmap_flash_data pdata = { + .width = TX3927_ROMC_WIDTH(ch) / 8, + }; + unsigned long start = txx9_ce_res[ch].start; + unsigned long size = txx9_ce_res[ch].end - start + 1; + + if (!(tx3927_romcptr->cr[ch] & 0x8)) + return; /* disabled */ + txx9_physmap_flash_init(ch, start, size, &pdata); +} diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c index f80d4b7a694d..914e93c62639 100644 --- a/arch/mips/txx9/generic/setup_tx4927.c +++ b/arch/mips/txx9/generic/setup_tx4927.c @@ -14,6 +14,10 @@ #include <linux/ioport.h> #include <linux/delay.h> #include <linux/param.h> +#include <linux/ptrace.h> +#include <linux/mtd/physmap.h> +#include <asm/reboot.h> +#include <asm/traps.h> #include <asm/txx9irq.h> #include <asm/txx9tmr.h> #include <asm/txx9pio.h> @@ -22,6 +26,10 @@ static void __init tx4927_wdr_init(void) { + /* report watchdog reset status */ + if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDRST) + pr_warning("Watchdog reset detected at 0x%lx\n", + read_c0_errorepc()); /* clear WatchDogReset (W1C) */ tx4927_ccfg_set(TX4927_CCFG_WDRST); /* do reset on watchdog */ @@ -33,6 +41,47 @@ void __init tx4927_wdt_init(void) txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); } +static void tx4927_machine_restart(char *command) +{ + local_irq_disable(); + pr_emerg("Rebooting (with %s watchdog reset)...\n", + (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDREXEN) ? + "external" : "internal"); + /* clear watchdog status */ + tx4927_ccfg_set(TX4927_CCFG_WDRST); /* W1C */ + txx9_wdt_now(TX4927_TMR_REG(2) & 0xfffffffffULL); + while (!(____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDRST)) + ; + mdelay(10); + if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDREXEN) { + pr_emerg("Rebooting (with internal watchdog reset)...\n"); + /* External WDRST failed. Do internal watchdog reset */ + tx4927_ccfg_clear(TX4927_CCFG_WDREXEN); + } + /* fallback */ + (*_machine_halt)(); +} + +void show_registers(struct pt_regs *regs); +static int tx4927_be_handler(struct pt_regs *regs, int is_fixup) +{ + int data = regs->cp0_cause & 4; + console_verbose(); + pr_err("%cBE exception at %#lx\n", data ? 'D' : 'I', regs->cp0_epc); + pr_err("ccfg:%llx, toea:%llx\n", + (unsigned long long)____raw_readq(&tx4927_ccfgptr->ccfg), + (unsigned long long)____raw_readq(&tx4927_ccfgptr->toea)); +#ifdef CONFIG_PCI + tx4927_report_pcic_status(); +#endif + show_registers(regs); + panic("BusError!"); +} +static void __init tx4927_be_init(void) +{ + board_be_handler = tx4927_be_handler; +} + static struct resource tx4927_sdram_resource[4]; void __init tx4927_setup(void) @@ -44,6 +93,7 @@ void __init tx4927_setup(void) txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE, TX4927_REG_SIZE); + set_c0_config(TX49_CONF_CWFON); /* SDRAMC,EBUSC are configured by PROM */ for (i = 0; i < 8; i++) { @@ -167,6 +217,9 @@ void __init tx4927_setup(void) txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO); __raw_writel(0, &tx4927_pioptr->maskcpu); __raw_writel(0, &tx4927_pioptr->maskext); + + _machine_restart = tx4927_machine_restart; + board_be_init = tx4927_be_init; } void __init tx4927_time_init(unsigned int tmrnr) @@ -186,3 +239,47 @@ void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask) TXX9_IRQ_BASE + TX4927_IR_SIO(i), i, sclk, (1 << i) & cts_mask); } + +void __init tx4927_mtd_init(int ch) +{ + struct physmap_flash_data pdata = { + .width = TX4927_EBUSC_WIDTH(ch) / 8, + }; + unsigned long start = txx9_ce_res[ch].start; + unsigned long size = txx9_ce_res[ch].end - start + 1; + + if (!(TX4927_EBUSC_CR(ch) & 0x8)) + return; /* disabled */ + txx9_physmap_flash_init(ch, start, size, &pdata); +} + +static void __init tx4927_stop_unused_modules(void) +{ + __u64 pcfg, rst = 0, ckd = 0; + char buf[128]; + + buf[0] = '\0'; + local_irq_disable(); + pcfg = ____raw_readq(&tx4927_ccfgptr->pcfg); + if (!(pcfg & TX4927_PCFG_SEL2)) { + rst |= TX4927_CLKCTR_ACLRST; + ckd |= TX4927_CLKCTR_ACLCKD; + strcat(buf, " ACLC"); + } + if (rst | ckd) { + txx9_set64(&tx4927_ccfgptr->clkctr, rst); + txx9_set64(&tx4927_ccfgptr->clkctr, ckd); + } + local_irq_enable(); + if (buf[0]) + pr_info("%s: stop%s\n", txx9_pcode_str, buf); +} + +static int __init tx4927_late_init(void) +{ + if (txx9_pcode != 0x4927) + return -ENODEV; + tx4927_stop_unused_modules(); + return 0; +} +late_initcall(tx4927_late_init); diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index f3040b9ba059..af724e53ef91 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -14,6 +14,10 @@ #include <linux/ioport.h> #include <linux/delay.h> #include <linux/param.h> +#include <linux/ptrace.h> +#include <linux/mtd/physmap.h> +#include <asm/reboot.h> +#include <asm/traps.h> #include <asm/txx9irq.h> #include <asm/txx9tmr.h> #include <asm/txx9pio.h> @@ -22,6 +26,10 @@ static void __init tx4938_wdr_init(void) { + /* report watchdog reset status */ + if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDRST) + pr_warning("Watchdog reset detected at 0x%lx\n", + read_c0_errorepc()); /* clear WatchDogReset (W1C) */ tx4938_ccfg_set(TX4938_CCFG_WDRST); /* do reset on watchdog */ @@ -33,6 +41,47 @@ void __init tx4938_wdt_init(void) txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); } +static void tx4938_machine_restart(char *command) +{ + local_irq_disable(); + pr_emerg("Rebooting (with %s watchdog reset)...\n", + (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDREXEN) ? + "external" : "internal"); + /* clear watchdog status */ + tx4938_ccfg_set(TX4938_CCFG_WDRST); /* W1C */ + txx9_wdt_now(TX4938_TMR_REG(2) & 0xfffffffffULL); + while (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDRST)) + ; + mdelay(10); + if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDREXEN) { + pr_emerg("Rebooting (with internal watchdog reset)...\n"); + /* External WDRST failed. Do internal watchdog reset */ + tx4938_ccfg_clear(TX4938_CCFG_WDREXEN); + } + /* fallback */ + (*_machine_halt)(); +} + +void show_registers(struct pt_regs *regs); +static int tx4938_be_handler(struct pt_regs *regs, int is_fixup) +{ + int data = regs->cp0_cause & 4; + console_verbose(); + pr_err("%cBE exception at %#lx\n", data ? 'D' : 'I', regs->cp0_epc); + pr_err("ccfg:%llx, toea:%llx\n", + (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg), + (unsigned long long)____raw_readq(&tx4938_ccfgptr->toea)); +#ifdef CONFIG_PCI + tx4927_report_pcic_status(); +#endif + show_registers(regs); + panic("BusError!"); +} +static void __init tx4938_be_init(void) +{ + board_be_handler = tx4938_be_handler; +} + static struct resource tx4938_sdram_resource[4]; static struct resource tx4938_sram_resource; @@ -47,6 +96,7 @@ void __init tx4938_setup(void) txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE, TX4938_REG_SIZE); + set_c0_config(TX49_CONF_CWFON); /* SDRAMC,EBUSC are configured by PROM */ for (i = 0; i < 8; i++) { @@ -227,6 +277,9 @@ void __init tx4938_setup(void) TX4938_CLKCTR_ETH1CKD); } } + + _machine_restart = tx4938_machine_restart; + board_be_init = tx4938_be_init; } void __init tx4938_time_init(unsigned int tmrnr) @@ -268,3 +321,72 @@ void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1) if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL)) txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1); } + +void __init tx4938_mtd_init(int ch) +{ + struct physmap_flash_data pdata = { + .width = TX4938_EBUSC_WIDTH(ch) / 8, + }; + unsigned long start = txx9_ce_res[ch].start; + unsigned long size = txx9_ce_res[ch].end - start + 1; + + if (!(TX4938_EBUSC_CR(ch) & 0x8)) + return; /* disabled */ + txx9_physmap_flash_init(ch, start, size, &pdata); +} + +static void __init tx4938_stop_unused_modules(void) +{ + __u64 pcfg, rst = 0, ckd = 0; + char buf[128]; + + buf[0] = '\0'; + local_irq_disable(); + pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); + switch (txx9_pcode) { + case 0x4937: + if (!(pcfg & TX4938_PCFG_SEL2)) { + rst |= TX4938_CLKCTR_ACLRST; + ckd |= TX4938_CLKCTR_ACLCKD; + strcat(buf, " ACLC"); + } + break; + case 0x4938: + if (!(pcfg & TX4938_PCFG_SEL2) || + (pcfg & TX4938_PCFG_ETH0_SEL)) { + rst |= TX4938_CLKCTR_ACLRST; + ckd |= TX4938_CLKCTR_ACLCKD; + strcat(buf, " ACLC"); + } + if ((pcfg & + (TX4938_PCFG_ATA_SEL | TX4938_PCFG_ISA_SEL | + TX4938_PCFG_NDF_SEL)) + != TX4938_PCFG_NDF_SEL) { + rst |= TX4938_CLKCTR_NDFRST; + ckd |= TX4938_CLKCTR_NDFCKD; + strcat(buf, " NDFMC"); + } + if (!(pcfg & TX4938_PCFG_SPI_SEL)) { + rst |= TX4938_CLKCTR_SPIRST; + ckd |= TX4938_CLKCTR_SPICKD; + strcat(buf, " SPI"); + } + break; + } + if (rst | ckd) { + txx9_set64(&tx4938_ccfgptr->clkctr, rst); + txx9_set64(&tx4938_ccfgptr->clkctr, ckd); + } + local_irq_enable(); + if (buf[0]) + pr_info("%s: stop%s\n", txx9_pcode_str, buf); +} + +static int __init tx4938_late_init(void) +{ + if (txx9_pcode != 0x4937 && txx9_pcode != 0x4938) + return -ENODEV; + tx4938_stop_unused_modules(); + return 0; +} +late_initcall(tx4938_late_init); diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c new file mode 100644 index 000000000000..6c0049a5bbc1 --- /dev/null +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -0,0 +1,506 @@ +/* + * TX4939 setup routines + * Based on linux/arch/mips/txx9/generic/setup_tx4938.c, + * and RBTX49xx patch from CELF patch archive. + * + * 2003-2005 (c) MontaVista Software, Inc. + * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/notifier.h> +#include <linux/sysdev.h> +#include <linux/ethtool.h> +#include <linux/param.h> +#include <linux/ptrace.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <asm/bootinfo.h> +#include <asm/reboot.h> +#include <asm/traps.h> +#include <asm/txx9irq.h> +#include <asm/txx9tmr.h> +#include <asm/txx9/generic.h> +#include <asm/txx9/tx4939.h> + +static void __init tx4939_wdr_init(void) +{ + /* report watchdog reset status */ + if (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDRST) + pr_warning("Watchdog reset detected at 0x%lx\n", + read_c0_errorepc()); + /* clear WatchDogReset (W1C) */ + tx4939_ccfg_set(TX4939_CCFG_WDRST); + /* do reset on watchdog */ + tx4939_ccfg_set(TX4939_CCFG_WR); +} + +void __init tx4939_wdt_init(void) +{ + txx9_wdt_init(TX4939_TMR_REG(2) & 0xfffffffffULL); +} + +static void tx4939_machine_restart(char *command) +{ + local_irq_disable(); + pr_emerg("Rebooting (with %s watchdog reset)...\n", + (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDREXEN) ? + "external" : "internal"); + /* clear watchdog status */ + tx4939_ccfg_set(TX4939_CCFG_WDRST); /* W1C */ + txx9_wdt_now(TX4939_TMR_REG(2) & 0xfffffffffULL); + while (!(____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDRST)) + ; + mdelay(10); + if (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDREXEN) { + pr_emerg("Rebooting (with internal watchdog reset)...\n"); + /* External WDRST failed. Do internal watchdog reset */ + tx4939_ccfg_clear(TX4939_CCFG_WDREXEN); + } + /* fallback */ + (*_machine_halt)(); +} + +void show_registers(struct pt_regs *regs); +static int tx4939_be_handler(struct pt_regs *regs, int is_fixup) +{ + int data = regs->cp0_cause & 4; + console_verbose(); + pr_err("%cBE exception at %#lx\n", + data ? 'D' : 'I', regs->cp0_epc); + pr_err("ccfg:%llx, toea:%llx\n", + (unsigned long long)____raw_readq(&tx4939_ccfgptr->ccfg), + (unsigned long long)____raw_readq(&tx4939_ccfgptr->toea)); +#ifdef CONFIG_PCI + tx4927_report_pcic_status(); +#endif + show_registers(regs); + panic("BusError!"); +} +static void __init tx4939_be_init(void) +{ + board_be_handler = tx4939_be_handler; +} + +static struct resource tx4939_sdram_resource[4]; +static struct resource tx4939_sram_resource; +#define TX4939_SRAM_SIZE 0x800 + +void __init tx4939_add_memory_regions(void) +{ + int i; + unsigned long start, size; + u64 win; + + for (i = 0; i < 4; i++) { + if (!((__u32)____raw_readq(&tx4939_ddrcptr->winen) & (1 << i))) + continue; + win = ____raw_readq(&tx4939_ddrcptr->win[i]); + start = (unsigned long)(win >> 48); + size = (((unsigned long)(win >> 32) & 0xffff) + 1) - start; + add_memory_region(start << 20, size << 20, BOOT_MEM_RAM); + } +} + +void __init tx4939_setup(void) +{ + int i; + __u32 divmode; + __u64 pcfg; + int cpuclk = 0; + + txx9_reg_res_init(TX4939_REV_PCODE(), TX4939_REG_BASE, + TX4939_REG_SIZE); + set_c0_config(TX49_CONF_CWFON); + + /* SDRAMC,EBUSC are configured by PROM */ + for (i = 0; i < 4; i++) { + if (!(TX4939_EBUSC_CR(i) & 0x8)) + continue; /* disabled */ + txx9_ce_res[i].start = (unsigned long)TX4939_EBUSC_BA(i); + txx9_ce_res[i].end = + txx9_ce_res[i].start + TX4939_EBUSC_SIZE(i) - 1; + request_resource(&iomem_resource, &txx9_ce_res[i]); + } + + /* clocks */ + if (txx9_master_clock) { + /* calculate cpu_clock from master_clock */ + divmode = (__u32)____raw_readq(&tx4939_ccfgptr->ccfg) & + TX4939_CCFG_MULCLK_MASK; + cpuclk = txx9_master_clock * 20 / 2; + switch (divmode) { + case TX4939_CCFG_MULCLK_8: + cpuclk = cpuclk / 3 * 4 /* / 6 * 8 */; break; + case TX4939_CCFG_MULCLK_9: + cpuclk = cpuclk / 2 * 3 /* / 6 * 9 */; break; + case TX4939_CCFG_MULCLK_10: + cpuclk = cpuclk / 3 * 5 /* / 6 * 10 */; break; + case TX4939_CCFG_MULCLK_11: + cpuclk = cpuclk / 6 * 11; break; + case TX4939_CCFG_MULCLK_12: + cpuclk = cpuclk * 2 /* / 6 * 12 */; break; + case TX4939_CCFG_MULCLK_13: + cpuclk = cpuclk / 6 * 13; break; + case TX4939_CCFG_MULCLK_14: + cpuclk = cpuclk / 3 * 7 /* / 6 * 14 */; break; + case TX4939_CCFG_MULCLK_15: + cpuclk = cpuclk / 2 * 5 /* / 6 * 15 */; break; + } + txx9_cpu_clock = cpuclk; + } else { + if (txx9_cpu_clock == 0) + txx9_cpu_clock = 400000000; /* 400MHz */ + /* calculate master_clock from cpu_clock */ + cpuclk = txx9_cpu_clock; + divmode = (__u32)____raw_readq(&tx4939_ccfgptr->ccfg) & + TX4939_CCFG_MULCLK_MASK; + switch (divmode) { + case TX4939_CCFG_MULCLK_8: + txx9_master_clock = cpuclk * 6 / 8; break; + case TX4939_CCFG_MULCLK_9: + txx9_master_clock = cpuclk * 6 / 9; break; + case TX4939_CCFG_MULCLK_10: + txx9_master_clock = cpuclk * 6 / 10; break; + case TX4939_CCFG_MULCLK_11: + txx9_master_clock = cpuclk * 6 / 11; break; + case TX4939_CCFG_MULCLK_12: + txx9_master_clock = cpuclk * 6 / 12; break; + case TX4939_CCFG_MULCLK_13: + txx9_master_clock = cpuclk * 6 / 13; break; + case TX4939_CCFG_MULCLK_14: + txx9_master_clock = cpuclk * 6 / 14; break; + case TX4939_CCFG_MULCLK_15: + txx9_master_clock = cpuclk * 6 / 15; break; + } + txx9_master_clock /= 10; /* * 2 / 20 */ + } + /* calculate gbus_clock from cpu_clock */ + divmode = (__u32)____raw_readq(&tx4939_ccfgptr->ccfg) & + TX4939_CCFG_YDIVMODE_MASK; + txx9_gbus_clock = txx9_cpu_clock; + switch (divmode) { + case TX4939_CCFG_YDIVMODE_2: + txx9_gbus_clock /= 2; break; + case TX4939_CCFG_YDIVMODE_3: + txx9_gbus_clock /= 3; break; + case TX4939_CCFG_YDIVMODE_5: + txx9_gbus_clock /= 5; break; + case TX4939_CCFG_YDIVMODE_6: + txx9_gbus_clock /= 6; break; + } + /* change default value to udelay/mdelay take reasonable time */ + loops_per_jiffy = txx9_cpu_clock / HZ / 2; + + /* CCFG */ + tx4939_wdr_init(); + /* clear BusErrorOnWrite flag (W1C) */ + tx4939_ccfg_set(TX4939_CCFG_WDRST | TX4939_CCFG_BEOW); + /* enable Timeout BusError */ + if (txx9_ccfg_toeon) + tx4939_ccfg_set(TX4939_CCFG_TOE); + + /* DMA selection */ + txx9_clear64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_DMASEL_ALL); + + /* Use external clock for external arbiter */ + if (!(____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCIARB)) + txx9_clear64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_PCICLKEN_ALL); + + pr_info("%s -- %dMHz(M%dMHz,G%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n", + txx9_pcode_str, + (cpuclk + 500000) / 1000000, + (txx9_master_clock + 500000) / 1000000, + (txx9_gbus_clock + 500000) / 1000000, + (__u32)____raw_readq(&tx4939_ccfgptr->crir), + (unsigned long long)____raw_readq(&tx4939_ccfgptr->ccfg), + (unsigned long long)____raw_readq(&tx4939_ccfgptr->pcfg)); + + pr_info("%s DDRC -- EN:%08x", txx9_pcode_str, + (__u32)____raw_readq(&tx4939_ddrcptr->winen)); + for (i = 0; i < 4; i++) { + __u64 win = ____raw_readq(&tx4939_ddrcptr->win[i]); + if (!((__u32)____raw_readq(&tx4939_ddrcptr->winen) & (1 << i))) + continue; /* disabled */ + printk(KERN_CONT " #%d:%016llx", i, (unsigned long long)win); + tx4939_sdram_resource[i].name = "DDR SDRAM"; + tx4939_sdram_resource[i].start = + (unsigned long)(win >> 48) << 20; + tx4939_sdram_resource[i].end = + ((((unsigned long)(win >> 32) & 0xffff) + 1) << + 20) - 1; + tx4939_sdram_resource[i].flags = IORESOURCE_MEM; + request_resource(&iomem_resource, &tx4939_sdram_resource[i]); + } + printk(KERN_CONT "\n"); + + /* SRAM */ + if (____raw_readq(&tx4939_sramcptr->cr) & 1) { + unsigned int size = TX4939_SRAM_SIZE; + tx4939_sram_resource.name = "SRAM"; + tx4939_sram_resource.start = + (____raw_readq(&tx4939_sramcptr->cr) >> (39-11)) + & ~(size - 1); + tx4939_sram_resource.end = + tx4939_sram_resource.start + TX4939_SRAM_SIZE - 1; + tx4939_sram_resource.flags = IORESOURCE_MEM; + request_resource(&iomem_resource, &tx4939_sram_resource); + } + + /* TMR */ + /* disable all timers */ + for (i = 0; i < TX4939_NR_TMR; i++) + txx9_tmr_init(TX4939_TMR_REG(i) & 0xfffffffffULL); + + /* DMA */ + for (i = 0; i < 2; i++) + ____raw_writeq(TX4938_DMA_MCR_MSTEN, + (void __iomem *)(TX4939_DMA_REG(i) + 0x50)); + + /* set PCIC1 reset (required to prevent hangup on BIST) */ + txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_PCI1RST); + pcfg = ____raw_readq(&tx4939_ccfgptr->pcfg); + if (pcfg & (TX4939_PCFG_ET0MODE | TX4939_PCFG_ET1MODE)) { + mdelay(1); /* at least 128 cpu clock */ + /* clear PCIC1 reset */ + txx9_clear64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_PCI1RST); + } else { + pr_info("%s: stop PCIC1\n", txx9_pcode_str); + /* stop PCIC1 */ + txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_PCI1CKD); + } + if (!(pcfg & TX4939_PCFG_ET0MODE)) { + pr_info("%s: stop ETH0\n", txx9_pcode_str); + txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH0RST); + txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH0CKD); + } + if (!(pcfg & TX4939_PCFG_ET1MODE)) { + pr_info("%s: stop ETH1\n", txx9_pcode_str); + txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH1RST); + txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH1CKD); + } + + _machine_restart = tx4939_machine_restart; + board_be_init = tx4939_be_init; +} + +void __init tx4939_time_init(unsigned int tmrnr) +{ + if (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_TINTDIS) + txx9_clockevent_init(TX4939_TMR_REG(tmrnr) & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4939_IR_TMR(tmrnr), + TXX9_IMCLK); +} + +void __init tx4939_sio_init(unsigned int sclk, unsigned int cts_mask) +{ + int i; + unsigned int ch_mask = 0; + __u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg); + + cts_mask |= ~1; /* only SIO0 have RTS/CTS */ + if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO0) + cts_mask |= 1 << 0; /* disable SIO0 RTS/CTS by PCFG setting */ + if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO2) + ch_mask |= 1 << 2; /* disable SIO2 by PCFG setting */ + if (pcfg & TX4939_PCFG_SIO3MODE) + ch_mask |= 1 << 3; /* disable SIO3 by PCFG setting */ + for (i = 0; i < 4; i++) { + if ((1 << i) & ch_mask) + continue; + txx9_sio_init(TX4939_SIO_REG(i) & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4939_IR_SIO(i), + i, sclk, (1 << i) & cts_mask); + } +} + +#if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE) +static int tx4939_get_eth_speed(struct net_device *dev) +{ + struct ethtool_cmd cmd = { ETHTOOL_GSET }; + int speed = 100; /* default 100Mbps */ + int err; + if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings) + return speed; + err = dev->ethtool_ops->get_settings(dev, &cmd); + if (err < 0) + return speed; + speed = cmd.speed == SPEED_100 ? 100 : 10; + return speed; +} +static int tx4939_netdev_event(struct notifier_block *this, + unsigned long event, + void *ptr) +{ + struct net_device *dev = ptr; + if (event == NETDEV_CHANGE && netif_carrier_ok(dev)) { + __u64 bit = 0; + if (dev->irq == TXX9_IRQ_BASE + TX4939_IR_ETH(0)) + bit = TX4939_PCFG_SPEED0; + else if (dev->irq == TXX9_IRQ_BASE + TX4939_IR_ETH(1)) + bit = TX4939_PCFG_SPEED1; + if (bit) { + int speed = tx4939_get_eth_speed(dev); + if (speed == 100) + txx9_set64(&tx4939_ccfgptr->pcfg, bit); + else + txx9_clear64(&tx4939_ccfgptr->pcfg, bit); + } + } + return NOTIFY_DONE; +} + +static struct notifier_block tx4939_netdev_notifier = { + .notifier_call = tx4939_netdev_event, + .priority = 1, +}; + +void __init tx4939_ethaddr_init(unsigned char *addr0, unsigned char *addr1) +{ + u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg); + + if (addr0 && (pcfg & TX4939_PCFG_ET0MODE)) + txx9_ethaddr_init(TXX9_IRQ_BASE + TX4939_IR_ETH(0), addr0); + if (addr1 && (pcfg & TX4939_PCFG_ET1MODE)) + txx9_ethaddr_init(TXX9_IRQ_BASE + TX4939_IR_ETH(1), addr1); + register_netdevice_notifier(&tx4939_netdev_notifier); +} +#else +void __init tx4939_ethaddr_init(unsigned char *addr0, unsigned char *addr1) +{ +} +#endif + +void __init tx4939_mtd_init(int ch) +{ + struct physmap_flash_data pdata = { + .width = TX4939_EBUSC_WIDTH(ch) / 8, + }; + unsigned long start = txx9_ce_res[ch].start; + unsigned long size = txx9_ce_res[ch].end - start + 1; + + if (!(TX4939_EBUSC_CR(ch) & 0x8)) + return; /* disabled */ + txx9_physmap_flash_init(ch, start, size, &pdata); +} + +#define TX4939_ATA_REG_PHYS(ch) (TX4939_ATA_REG(ch) & 0xfffffffffULL) +void __init tx4939_ata_init(void) +{ + static struct resource ata0_res[] = { + { + .start = TX4939_ATA_REG_PHYS(0), + .end = TX4939_ATA_REG_PHYS(0) + 0x1000 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = TXX9_IRQ_BASE + TX4939_IR_ATA(0), + .flags = IORESOURCE_IRQ, + }, + }; + static struct resource ata1_res[] = { + { + .start = TX4939_ATA_REG_PHYS(1), + .end = TX4939_ATA_REG_PHYS(1) + 0x1000 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = TXX9_IRQ_BASE + TX4939_IR_ATA(1), + .flags = IORESOURCE_IRQ, + }, + }; + static struct platform_device ata0_dev = { + .name = "tx4939ide", + .id = 0, + .num_resources = ARRAY_SIZE(ata0_res), + .resource = ata0_res, + }; + static struct platform_device ata1_dev = { + .name = "tx4939ide", + .id = 1, + .num_resources = ARRAY_SIZE(ata1_res), + .resource = ata1_res, + }; + __u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg); + + if (pcfg & TX4939_PCFG_ATA0MODE) + platform_device_register(&ata0_dev); + if ((pcfg & (TX4939_PCFG_ATA1MODE | + TX4939_PCFG_ET1MODE | + TX4939_PCFG_ET0MODE)) == TX4939_PCFG_ATA1MODE) + platform_device_register(&ata1_dev); +} + +static void __init tx4939_stop_unused_modules(void) +{ + __u64 pcfg, rst = 0, ckd = 0; + char buf[128]; + + buf[0] = '\0'; + local_irq_disable(); + pcfg = ____raw_readq(&tx4939_ccfgptr->pcfg); + if ((pcfg & TX4939_PCFG_I2SMODE_MASK) != + TX4939_PCFG_I2SMODE_ACLC) { + rst |= TX4939_CLKCTR_ACLRST; + ckd |= TX4939_CLKCTR_ACLCKD; + strcat(buf, " ACLC"); + } + if ((pcfg & TX4939_PCFG_I2SMODE_MASK) != + TX4939_PCFG_I2SMODE_I2S && + (pcfg & TX4939_PCFG_I2SMODE_MASK) != + TX4939_PCFG_I2SMODE_I2S_ALT) { + rst |= TX4939_CLKCTR_I2SRST; + ckd |= TX4939_CLKCTR_I2SCKD; + strcat(buf, " I2S"); + } + if (!(pcfg & TX4939_PCFG_ATA0MODE)) { + rst |= TX4939_CLKCTR_ATA0RST; + ckd |= TX4939_CLKCTR_ATA0CKD; + strcat(buf, " ATA0"); + } + if (!(pcfg & TX4939_PCFG_ATA1MODE)) { + rst |= TX4939_CLKCTR_ATA1RST; + ckd |= TX4939_CLKCTR_ATA1CKD; + strcat(buf, " ATA1"); + } + if (pcfg & TX4939_PCFG_SPIMODE) { + rst |= TX4939_CLKCTR_SPIRST; + ckd |= TX4939_CLKCTR_SPICKD; + strcat(buf, " SPI"); + } + if (!(pcfg & (TX4939_PCFG_VSSMODE | TX4939_PCFG_VPSMODE))) { + rst |= TX4939_CLKCTR_VPCRST; + ckd |= TX4939_CLKCTR_VPCCKD; + strcat(buf, " VPC"); + } + if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO2) { + rst |= TX4939_CLKCTR_SIO2RST; + ckd |= TX4939_CLKCTR_SIO2CKD; + strcat(buf, " SIO2"); + } + if (pcfg & TX4939_PCFG_SIO3MODE) { + rst |= TX4939_CLKCTR_SIO3RST; + ckd |= TX4939_CLKCTR_SIO3CKD; + strcat(buf, " SIO3"); + } + if (rst | ckd) { + txx9_set64(&tx4939_ccfgptr->clkctr, rst); + txx9_set64(&tx4939_ccfgptr->clkctr, ckd); + } + local_irq_enable(); + if (buf[0]) + pr_info("%s: stop%s\n", txx9_pcode_str, buf); +} + +static int __init tx4939_late_init(void) +{ + if (txx9_pcode != 0x4939) + return -ENODEV; + tx4939_stop_unused_modules(); + return 0; +} +late_initcall(tx4939_late_init); diff --git a/arch/mips/txx9/rbtx4938/spi_eeprom.c b/arch/mips/txx9/generic/spi_eeprom.c index a7ea8b041c1d..75c347238f47 100644 --- a/arch/mips/txx9/rbtx4938/spi_eeprom.c +++ b/arch/mips/txx9/generic/spi_eeprom.c @@ -18,29 +18,31 @@ #define AT250X0_PAGE_SIZE 8 /* register board information for at25 driver */ -int __init spi_eeprom_register(int chipid) +int __init spi_eeprom_register(int busid, int chipid, int size) { - static struct spi_eeprom eeprom = { - .name = "at250x0", - .byte_len = 128, - .page_size = AT250X0_PAGE_SIZE, - .flags = EE_ADDR1, - }; struct spi_board_info info = { .modalias = "at25", .max_speed_hz = 1500000, /* 1.5Mbps */ - .bus_num = 0, + .bus_num = busid, .chip_select = chipid, - .platform_data = &eeprom, /* Mode 0: High-Active, Sample-Then-Shift */ }; - + struct spi_eeprom *eeprom; + eeprom = kzalloc(sizeof(*eeprom), GFP_KERNEL); + if (!eeprom) + return -ENOMEM; + strcpy(eeprom->name, "at250x0"); + eeprom->byte_len = size; + eeprom->page_size = AT250X0_PAGE_SIZE; + eeprom->flags = EE_ADDR1; + info.platform_data = eeprom; return spi_register_board_info(&info, 1); } /* simple temporary spi driver to provide early access to seeprom. */ static struct read_param { + int busid; int chipid; int address; unsigned char *buf; @@ -57,7 +59,8 @@ static int __init early_seeprom_probe(struct spi_device *spi) dev_info(&spi->dev, "spiclk %u KHz.\n", (spi->max_speed_hz + 500) / 1000); - if (read_param->chipid != spi->chip_select) + if (read_param->busid != spi->master->bus_num || + read_param->chipid != spi->chip_select) return -ENODEV; while (len > 0) { /* spi_write_then_read can only work with small chunk */ @@ -80,11 +83,12 @@ static struct spi_driver early_seeprom_driver __initdata = { .probe = early_seeprom_probe, }; -int __init spi_eeprom_read(int chipid, int address, +int __init spi_eeprom_read(int busid, int chipid, int address, unsigned char *buf, int len) { int ret; struct read_param param = { + .busid = busid, .chipid = chipid, .address = address, .buf = buf, diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c index 70c4c8ec3e84..c899c0c087a0 100644 --- a/arch/mips/txx9/jmr3927/prom.c +++ b/arch/mips/txx9/jmr3927/prom.c @@ -47,7 +47,6 @@ void __init jmr3927_prom_init(void) if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0) printk(KERN_ERR "TX3927 TLB off\n"); - prom_init_cmdline(); add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM); txx9_sio_putchar_init(TX3927_SIO_REG(1)); } diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 87db41be8a56..25e50a7be387 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -62,7 +62,6 @@ static void __init jmr3927_time_init(void) } #define DO_WRITE_THROUGH -#define DO_ENABLE_CACHE static void jmr3927_board_init(void); @@ -77,11 +76,6 @@ static void __init jmr3927_mem_setup(void) /* cache setup */ { unsigned int conf; -#ifdef DO_ENABLE_CACHE - int mips_ic_disable = 0, mips_dc_disable = 0; -#else - int mips_ic_disable = 1, mips_dc_disable = 1; -#endif #ifdef DO_WRITE_THROUGH int mips_config_cwfon = 0; int mips_config_wbon = 0; @@ -91,10 +85,7 @@ static void __init jmr3927_mem_setup(void) #endif conf = read_c0_conf(); - conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | - TX39_CONF_WBON | TX39_CONF_CWFON); - conf |= mips_ic_disable ? 0 : TX39_CONF_ICE; - conf |= mips_dc_disable ? 0 : TX39_CONF_DCE; + conf &= ~(TX39_CONF_WBON | TX39_CONF_CWFON); conf |= mips_config_wbon ? TX39_CONF_WBON : 0; conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0; @@ -199,11 +190,25 @@ static void __init jmr3927_rtc_init(void) platform_device_register_simple("rtc-ds1742", -1, &res, 1); } +static void __init jmr3927_mtd_init(void) +{ + int i; + + for (i = 0; i < 2; i++) + tx3927_mtd_init(i); +} + static void __init jmr3927_device_init(void) { + unsigned long iocled_base = JMR3927_IOC_LED_ADDR - IO_BASE; +#ifdef __LITTLE_ENDIAN + iocled_base |= 1; +#endif __swizzle_addr_b = jmr3927_swizzle_addr_b; jmr3927_rtc_init(); tx3927_wdt_init(); + jmr3927_mtd_init(); + txx9_iocled_init(iocled_base, -1, 8, 1, "green", NULL); } struct txx9_board_vec jmr3927_vec __initdata = { diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c index 00cd5231da30..9c14ebb26cb4 100644 --- a/arch/mips/txx9/rbtx4927/irq.c +++ b/arch/mips/txx9/rbtx4927/irq.c @@ -133,15 +133,20 @@ static int toshiba_rbtx4927_irq_nested(int sw_irq) u8 level3; level3 = readb(rbtx4927_imstat_addr) & 0x1f; - if (level3) - sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1; - return sw_irq; + if (unlikely(!level3)) + return -1; + return RBTX4927_IRQ_IOC + __fls8(level3); } static void __init toshiba_rbtx4927_irq_ioc_init(void) { int i; + /* mask all IOC interrupts */ + writeb(0, rbtx4927_imask_addr); + /* clear SoftInt interrupts */ + writeb(0, rbtx4927_softint_addr); + for (i = RBTX4927_IRQ_IOC; i < RBTX4927_IRQ_IOC + RBTX4927_NR_IRQ_IOC; i++) set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type, diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c index 1dc0a5b1956b..cc97c6a6011b 100644 --- a/arch/mips/txx9/rbtx4927/prom.c +++ b/arch/mips/txx9/rbtx4927/prom.c @@ -36,7 +36,6 @@ void __init rbtx4927_prom_init(void) { - prom_init_cmdline(); add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM); txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL); } diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 0d39bafea794..4a74423b2ba8 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -48,6 +48,7 @@ #include <linux/ioport.h> #include <linux/platform_device.h> #include <linux/delay.h> +#include <linux/gpio.h> #include <asm/io.h> #include <asm/reboot.h> #include <asm/txx9/generic.h> @@ -185,14 +186,8 @@ static void __init rbtx4937_clock_init(void); static void __init rbtx4927_mem_setup(void) { - u32 cp0_config; char *argptr; - /* enable caches -- HCP5 does this, pmon does not */ - cp0_config = read_c0_config(); - cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC); - write_c0_config(cp0_config); - if (TX4927_REV_PCODE() == 0x4927) { rbtx4927_clock_init(); tx4927_setup(); @@ -212,6 +207,14 @@ static void __init rbtx4927_mem_setup(void) set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET); #endif + /* TX4927-SIO DTR on (PIO[15]) */ + gpio_request(15, "sio-dtr"); + gpio_direction_output(15, 1); + gpio_request(0, "led"); + gpio_direction_output(0, 1); + gpio_request(1, "led"); + gpio_direction_output(1, 1); + tx4927_sio_init(0, 0); #ifdef CONFIG_SERIAL_TXX9_CONSOLE argptr = prom_getcmdline(); @@ -304,11 +307,21 @@ static void __init rbtx4927_ne_init(void) platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res)); } +static void __init rbtx4927_mtd_init(void) +{ + int i; + + for (i = 0; i < 2; i++) + tx4927_mtd_init(i); +} + static void __init rbtx4927_device_init(void) { toshiba_rbtx4927_rtc_init(); rbtx4927_ne_init(); tx4927_wdt_init(); + rbtx4927_mtd_init(); + txx9_iocled_init(RBTX4927_LED_ADDR - IO_BASE, -1, 3, 1, "green", NULL); } struct txx9_board_vec rbtx4927_vec __initdata = { diff --git a/arch/mips/txx9/rbtx4938/Makefile b/arch/mips/txx9/rbtx4938/Makefile index 9dcc52ae5b9d..f3e1f597b4f1 100644 --- a/arch/mips/txx9/rbtx4938/Makefile +++ b/arch/mips/txx9/rbtx4938/Makefile @@ -1,3 +1,3 @@ -obj-y += prom.o setup.o irq.o spi_eeprom.o +obj-y += prom.o setup.o irq.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c index ca2f8306ce93..7d21befb8932 100644 --- a/arch/mips/txx9/rbtx4938/irq.c +++ b/arch/mips/txx9/rbtx4938/irq.c @@ -85,10 +85,10 @@ static int toshiba_rbtx4938_irq_nested(int sw_irq) u8 level3; level3 = readb(rbtx4938_imstat_addr); - if (level3) - /* must use fls so onboard ATA has priority */ - sw_irq = RBTX4938_IRQ_IOC + fls(level3) - 1; - return sw_irq; + if (unlikely(!level3)) + return -1; + /* must use fls so onboard ATA has priority */ + return RBTX4938_IRQ_IOC + __fls8(level3); } static void __init diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c index d73123cd2ab9..bcb469247e8c 100644 --- a/arch/mips/txx9/rbtx4938/prom.c +++ b/arch/mips/txx9/rbtx4938/prom.c @@ -18,9 +18,6 @@ void __init rbtx4938_prom_init(void) { -#ifndef CONFIG_TX4938_NAND_BOOT - prom_init_cmdline(); -#endif add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM); txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL); } diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 9ab48dec0fe8..e077cc4d3a59 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -15,6 +15,7 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/mtd/physmap.h> #include <asm/reboot.h> #include <asm/io.h> @@ -110,6 +111,7 @@ static void __init rbtx4938_pci_setup(void) #define SEEPROM2_CS 0 /* IOC */ #define SEEPROM3_CS 1 /* IOC */ #define SRTC_CS 2 /* IOC */ +#define SPI_BUSNO 0 static int __init rbtx4938_ethaddr_init(void) { @@ -119,7 +121,7 @@ static int __init rbtx4938_ethaddr_init(void) int i; /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */ - if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) { + if (spi_eeprom_read(SPI_BUSNO, SEEPROM1_CS, 0, dat, sizeof(dat))) { printk(KERN_ERR "seeprom: read error.\n"); return -ENODEV; } else { @@ -173,23 +175,30 @@ static void __init rbtx4938_mem_setup(void) #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 - printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n"); + pr_info("PIOSEL: disabling both ATA and NAND selection\n"); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND - printk(KERN_INFO "PIOSEL: enabling nand selection\n"); + pr_info("PIOSEL: enabling NAND selection\n"); txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA - printk(KERN_INFO "PIOSEL: enabling ata selection\n"); + pr_info("PIOSEL: enabling ATA selection\n"); txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); #endif +#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP + pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); + pr_info("PIOSEL: NAND %s, ATA %s\n", + (pcfg & TX4938_PCFG_NDF_SEL) ? "enabled" : "disabled", + (pcfg & TX4938_PCFG_ATA_SEL) ? "enabled" : "disabled"); +#endif + rbtx4938_spi_setup(); pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */ /* fixup piosel */ @@ -279,9 +288,9 @@ static int __init rbtx4938_spi_init(void) .mode = SPI_MODE_1 | SPI_CS_HIGH, }; spi_register_board_info(&srtc_info, 1); - spi_eeprom_register(SEEPROM1_CS); - spi_eeprom_register(16 + SEEPROM2_CS); - spi_eeprom_register(16 + SEEPROM3_CS); + spi_eeprom_register(SPI_BUSNO, SEEPROM1_CS, 128); + spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM2_CS, 128); + spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM3_CS, 128); gpio_request(16 + SRTC_CS, "rtc-rs5c348"); gpio_direction_output(16 + SRTC_CS, 0); gpio_request(SEEPROM1_CS, "seeprom1"); @@ -290,10 +299,46 @@ static int __init rbtx4938_spi_init(void) gpio_direction_output(16 + SEEPROM2_CS, 1); gpio_request(16 + SEEPROM3_CS, "seeprom3"); gpio_direction_output(16 + SEEPROM3_CS, 1); - tx4938_spi_init(0); + tx4938_spi_init(SPI_BUSNO); return 0; } +static void __init rbtx4938_mtd_init(void) +{ + struct physmap_flash_data pdata = { + .width = 4, + }; + + switch (readb(rbtx4938_bdipsw_addr) & 7) { + case 0: + /* Boot */ + txx9_physmap_flash_init(0, 0x1fc00000, 0x400000, &pdata); + /* System */ + txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata); + break; + case 1: + /* System */ + txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata); + /* Boot */ + txx9_physmap_flash_init(1, 0x1ec00000, 0x400000, &pdata); + break; + case 2: + /* Ext */ + txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata); + /* System */ + txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata); + /* Boot */ + txx9_physmap_flash_init(2, 0x1dc00000, 0x400000, &pdata); + break; + case 3: + /* Boot */ + txx9_physmap_flash_init(1, 0x1bc00000, 0x400000, &pdata); + /* System */ + txx9_physmap_flash_init(2, 0x1a000000, 0x1000000, &pdata); + break; + } +} + static void __init rbtx4938_arch_init(void) { gpiochip_add(&rbtx4938_spi_gpio_chip); @@ -306,6 +351,8 @@ static void __init rbtx4938_device_init(void) rbtx4938_ethaddr_init(); rbtx4938_ne_init(); tx4938_wdt_init(); + rbtx4938_mtd_init(); + txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL); } struct txx9_board_vec rbtx4938_vec __initdata = { diff --git a/arch/mips/txx9/rbtx4939/Makefile b/arch/mips/txx9/rbtx4939/Makefile new file mode 100644 index 000000000000..3232cd03a7d6 --- /dev/null +++ b/arch/mips/txx9/rbtx4939/Makefile @@ -0,0 +1,3 @@ +obj-y += irq.o setup.o prom.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/rbtx4939/irq.c b/arch/mips/txx9/rbtx4939/irq.c new file mode 100644 index 000000000000..500cc0a908e6 --- /dev/null +++ b/arch/mips/txx9/rbtx4939/irq.c @@ -0,0 +1,96 @@ +/* + * Toshiba RBTX4939 interrupt routines + * Based on linux/arch/mips/txx9/rbtx4938/irq.c, + * and RBTX49xx patch from CELF patch archive. + * + * Copyright (C) 2000-2001,2005-2006 Toshiba Corporation + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <asm/mipsregs.h> +#include <asm/txx9/rbtx4939.h> + +/* + * RBTX4939 IOC controller definition + */ + +static void rbtx4939_ioc_irq_unmask(unsigned int irq) +{ + int ioc_nr = irq - RBTX4939_IRQ_IOC; + + writeb(readb(rbtx4939_ien_addr) | (1 << ioc_nr), rbtx4939_ien_addr); +} + +static void rbtx4939_ioc_irq_mask(unsigned int irq) +{ + int ioc_nr = irq - RBTX4939_IRQ_IOC; + + writeb(readb(rbtx4939_ien_addr) & ~(1 << ioc_nr), rbtx4939_ien_addr); + mmiowb(); +} + +static struct irq_chip rbtx4939_ioc_irq_chip = { + .name = "IOC", + .ack = rbtx4939_ioc_irq_mask, + .mask = rbtx4939_ioc_irq_mask, + .mask_ack = rbtx4939_ioc_irq_mask, + .unmask = rbtx4939_ioc_irq_unmask, +}; + + +static inline int rbtx4939_ioc_irqroute(void) +{ + unsigned char istat = readb(rbtx4939_ifac2_addr); + + if (unlikely(istat == 0)) + return -1; + return RBTX4939_IRQ_IOC + __fls8(istat); +} + +static int rbtx4939_irq_dispatch(int pending) +{ + int irq; + + if (pending & CAUSEF_IP7) + return MIPS_CPU_IRQ_BASE + 7; + irq = tx4939_irq(); + if (likely(irq >= 0)) { + /* redirect IOC interrupts */ + switch (irq) { + case RBTX4939_IRQ_IOCINT: + irq = rbtx4939_ioc_irqroute(); + break; + } + } else if (pending & CAUSEF_IP0) + irq = MIPS_CPU_IRQ_BASE + 0; + else if (pending & CAUSEF_IP1) + irq = MIPS_CPU_IRQ_BASE + 1; + else + irq = -1; + return irq; +} + +void __init rbtx4939_irq_setup(void) +{ + int i; + + /* mask all IOC interrupts */ + writeb(0, rbtx4939_ien_addr); + + /* clear SoftInt interrupts */ + writeb(0, rbtx4939_softint_addr); + + txx9_irq_dispatch = rbtx4939_irq_dispatch; + + tx4939_irq_init(); + for (i = RBTX4939_IRQ_IOC; + i < RBTX4939_IRQ_IOC + RBTX4939_NR_IRQ_IOC; i++) + set_irq_chip_and_handler(i, &rbtx4939_ioc_irq_chip, + handle_level_irq); + + set_irq_chained_handler(RBTX4939_IRQ_IOCINT, handle_simple_irq); +} diff --git a/arch/mips/txx9/rbtx4939/prom.c b/arch/mips/txx9/rbtx4939/prom.c new file mode 100644 index 000000000000..bd277ecb4ad6 --- /dev/null +++ b/arch/mips/txx9/rbtx4939/prom.c @@ -0,0 +1,17 @@ +/* + * rbtx4939 specific prom routines + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <asm/txx9/generic.h> +#include <asm/txx9/rbtx4939.h> + +void __init rbtx4939_prom_init(void) +{ + tx4939_add_memory_regions(); + txx9_sio_putchar_init(TX4939_SIO_REG(0) & 0xfffffffffULL); +} diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c new file mode 100644 index 000000000000..9855d7bccc20 --- /dev/null +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -0,0 +1,307 @@ +/* + * Toshiba RBTX4939 setup routines. + * Based on linux/arch/mips/txx9/rbtx4938/setup.c, + * and RBTX49xx patch from CELF patch archive. + * + * Copyright (C) 2000-2001,2005-2007 Toshiba Corporation + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <asm/reboot.h> +#include <asm/txx9/generic.h> +#include <asm/txx9/pci.h> +#include <asm/txx9/rbtx4939.h> + +static void rbtx4939_machine_restart(char *command) +{ + local_irq_disable(); + writeb(1, rbtx4939_reseten_addr); + writeb(1, rbtx4939_softreset_addr); + while (1) + ; +} + +static void __init rbtx4939_time_init(void) +{ + tx4939_time_init(0); +} + +static void __init rbtx4939_pci_setup(void) +{ +#ifdef CONFIG_PCI + int extarb = !(__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCIARB); + struct pci_controller *c = &txx9_primary_pcic; + + register_pci_controller(c); + + tx4939_report_pciclk(); + tx4927_pcic_setup(tx4939_pcicptr, c, extarb); + if (!(__raw_readq(&tx4939_ccfgptr->pcfg) & TX4939_PCFG_ATA1MODE) && + (__raw_readq(&tx4939_ccfgptr->pcfg) & + (TX4939_PCFG_ET0MODE | TX4939_PCFG_ET1MODE))) { + tx4939_report_pci1clk(); + + /* mem:64K(max), io:64K(max) (enough for ETH0,ETH1) */ + c = txx9_alloc_pci_controller(NULL, 0, 0x10000, 0, 0x10000); + register_pci_controller(c); + tx4927_pcic_setup(tx4939_pcic1ptr, c, 0); + } + + tx4939_setup_pcierr_irq(); +#endif /* CONFIG_PCI */ +} + +static unsigned long long default_ebccr[] __initdata = { + 0x01c0000000007608ULL, /* 64M ROM */ + 0x017f000000007049ULL, /* 1M IOC */ + 0x0180000000408608ULL, /* ISA */ + 0, +}; + +static void __init rbtx4939_ebusc_setup(void) +{ + int i; + unsigned int sp; + + /* use user-configured speed */ + sp = TX4939_EBUSC_CR(0) & 0x30; + default_ebccr[0] |= sp; + default_ebccr[1] |= sp; + default_ebccr[2] |= sp; + /* initialise by myself */ + for (i = 0; i < ARRAY_SIZE(default_ebccr); i++) { + if (default_ebccr[i]) + ____raw_writeq(default_ebccr[i], + &tx4939_ebuscptr->cr[i]); + else + ____raw_writeq(____raw_readq(&tx4939_ebuscptr->cr[i]) + & ~8, + &tx4939_ebuscptr->cr[i]); + } +} + +static void __init rbtx4939_update_ioc_pen(void) +{ + __u64 pcfg = ____raw_readq(&tx4939_ccfgptr->pcfg); + __u64 ccfg = ____raw_readq(&tx4939_ccfgptr->ccfg); + __u8 pe1 = readb(rbtx4939_pe1_addr); + __u8 pe2 = readb(rbtx4939_pe2_addr); + __u8 pe3 = readb(rbtx4939_pe3_addr); + if (pcfg & TX4939_PCFG_ATA0MODE) + pe1 |= RBTX4939_PE1_ATA(0); + else + pe1 &= ~RBTX4939_PE1_ATA(0); + if (pcfg & TX4939_PCFG_ATA1MODE) { + pe1 |= RBTX4939_PE1_ATA(1); + pe1 &= ~(RBTX4939_PE1_RMII(0) | RBTX4939_PE1_RMII(1)); + } else { + pe1 &= ~RBTX4939_PE1_ATA(1); + if (pcfg & TX4939_PCFG_ET0MODE) + pe1 |= RBTX4939_PE1_RMII(0); + else + pe1 &= ~RBTX4939_PE1_RMII(0); + if (pcfg & TX4939_PCFG_ET1MODE) + pe1 |= RBTX4939_PE1_RMII(1); + else + pe1 &= ~RBTX4939_PE1_RMII(1); + } + if (ccfg & TX4939_CCFG_PTSEL) + pe3 &= ~(RBTX4939_PE3_VP | RBTX4939_PE3_VP_P | + RBTX4939_PE3_VP_S); + else { + __u64 vmode = pcfg & + (TX4939_PCFG_VSSMODE | TX4939_PCFG_VPSMODE); + if (vmode == 0) + pe3 &= ~(RBTX4939_PE3_VP | RBTX4939_PE3_VP_P | + RBTX4939_PE3_VP_S); + else if (vmode == TX4939_PCFG_VPSMODE) { + pe3 |= RBTX4939_PE3_VP_P; + pe3 &= ~(RBTX4939_PE3_VP | RBTX4939_PE3_VP_S); + } else if (vmode == TX4939_PCFG_VSSMODE) { + pe3 |= RBTX4939_PE3_VP | RBTX4939_PE3_VP_S; + pe3 &= ~RBTX4939_PE3_VP_P; + } else { + pe3 |= RBTX4939_PE3_VP | RBTX4939_PE3_VP_P; + pe3 &= ~RBTX4939_PE3_VP_S; + } + } + if (pcfg & TX4939_PCFG_SPIMODE) { + if (pcfg & TX4939_PCFG_SIO2MODE_GPIO) + pe2 &= ~(RBTX4939_PE2_SIO2 | RBTX4939_PE2_SIO0); + else { + if (pcfg & TX4939_PCFG_SIO2MODE_SIO2) { + pe2 |= RBTX4939_PE2_SIO2; + pe2 &= ~RBTX4939_PE2_SIO0; + } else { + pe2 |= RBTX4939_PE2_SIO0; + pe2 &= ~RBTX4939_PE2_SIO2; + } + } + if (pcfg & TX4939_PCFG_SIO3MODE) + pe2 |= RBTX4939_PE2_SIO3; + else + pe2 &= ~RBTX4939_PE2_SIO3; + pe2 &= ~RBTX4939_PE2_SPI; + } else { + pe2 |= RBTX4939_PE2_SPI; + pe2 &= ~(RBTX4939_PE2_SIO3 | RBTX4939_PE2_SIO2 | + RBTX4939_PE2_SIO0); + } + if ((pcfg & TX4939_PCFG_I2SMODE_MASK) == TX4939_PCFG_I2SMODE_GPIO) + pe2 |= RBTX4939_PE2_GPIO; + else + pe2 &= ~RBTX4939_PE2_GPIO; + writeb(pe1, rbtx4939_pe1_addr); + writeb(pe2, rbtx4939_pe2_addr); + writeb(pe3, rbtx4939_pe3_addr); +} + +#define RBTX4939_MAX_7SEGLEDS 8 + +#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) +static u8 led_val[RBTX4939_MAX_7SEGLEDS]; +struct rbtx4939_led_data { + struct led_classdev cdev; + char name[32]; + unsigned int num; +}; + +/* Use "dot" in 7seg LEDs */ +static void rbtx4939_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct rbtx4939_led_data *led_dat = + container_of(led_cdev, struct rbtx4939_led_data, cdev); + unsigned int num = led_dat->num; + unsigned long flags; + + local_irq_save(flags); + led_val[num] = (led_val[num] & 0x7f) | (value ? 0x80 : 0); + writeb(led_val[num], rbtx4939_7seg_addr(num / 4, num % 4)); + local_irq_restore(flags); +} + +static int __init rbtx4939_led_probe(struct platform_device *pdev) +{ + struct rbtx4939_led_data *leds_data; + int i; + static char *default_triggers[] __initdata = { + "heartbeat", + "ide-disk", + "nand-disk", + }; + + leds_data = kzalloc(sizeof(*leds_data) * RBTX4939_MAX_7SEGLEDS, + GFP_KERNEL); + if (!leds_data) + return -ENOMEM; + for (i = 0; i < RBTX4939_MAX_7SEGLEDS; i++) { + int rc; + struct rbtx4939_led_data *led_dat = &leds_data[i]; + + led_dat->num = i; + led_dat->cdev.brightness_set = rbtx4939_led_brightness_set; + sprintf(led_dat->name, "rbtx4939:amber:%u", i); + led_dat->cdev.name = led_dat->name; + if (i < ARRAY_SIZE(default_triggers)) + led_dat->cdev.default_trigger = default_triggers[i]; + rc = led_classdev_register(&pdev->dev, &led_dat->cdev); + if (rc < 0) + return rc; + led_dat->cdev.brightness_set(&led_dat->cdev, 0); + } + return 0; + +} + +static struct platform_driver rbtx4939_led_driver = { + .driver = { + .name = "rbtx4939-led", + .owner = THIS_MODULE, + }, +}; + +static void __init rbtx4939_led_setup(void) +{ + platform_device_register_simple("rbtx4939-led", -1, NULL, 0); + platform_driver_probe(&rbtx4939_led_driver, rbtx4939_led_probe); +} +#else +static inline void rbtx4939_led_setup(void) +{ +} +#endif + +static void __init rbtx4939_arch_init(void) +{ + rbtx4939_pci_setup(); +} + +static void __init rbtx4939_device_init(void) +{ +#if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE) + int i, j; + unsigned char ethaddr[2][6]; + for (i = 0; i < 2; i++) { + unsigned long area = CKSEG1 + 0x1fff0000 + (i * 0x10); + if (readb(rbtx4939_bdipsw_addr) & 8) { + u16 buf[3]; + area -= 0x03000000; + for (j = 0; j < 3; j++) + buf[j] = le16_to_cpup((u16 *)(area + j * 2)); + memcpy(ethaddr[i], buf, 6); + } else + memcpy(ethaddr[i], (void *)area, 6); + } + tx4939_ethaddr_init(ethaddr[0], ethaddr[1]); +#endif + rbtx4939_led_setup(); + tx4939_wdt_init(); + tx4939_ata_init(); +} + +static void __init rbtx4939_setup(void) +{ + rbtx4939_ebusc_setup(); + /* always enable ATA0 */ + txx9_set64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_ATA0MODE); + rbtx4939_update_ioc_pen(); + if (txx9_master_clock == 0) + txx9_master_clock = 20000000; + tx4939_setup(); + + _machine_restart = rbtx4939_machine_restart; + + pr_info("RBTX4939 (Rev %02x) --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", + readb(rbtx4939_board_rev_addr), readb(rbtx4939_ioc_rev_addr), + readb(rbtx4939_udipsw_addr), readb(rbtx4939_bdipsw_addr)); + +#ifdef CONFIG_PCI + txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0); + txx9_board_pcibios_setup = tx4927_pcibios_setup; +#else + set_io_port_base(RBTX4939_ETHER_BASE); +#endif + + tx4939_sio_init(TX4939_SCLK0(txx9_master_clock), 0); +} + +struct txx9_board_vec rbtx4939_vec __initdata = { + .system = "Tothiba RBTX4939", + .prom_init = rbtx4939_prom_init, + .mem_setup = rbtx4939_setup, + .irq_setup = rbtx4939_irq_setup, + .time_init = rbtx4939_time_init, + .device_init = rbtx4939_device_init, + .arch_init = rbtx4939_arch_init, +#ifdef CONFIG_PCI + .pci_map_irq = tx4939_pci_map_irq, +#endif +}; |
