diff options
Diffstat (limited to 'arch/mips/include')
60 files changed, 3324 insertions, 795 deletions
diff --git a/arch/mips/include/asm/bmips.h b/arch/mips/include/asm/bmips.h new file mode 100644 index 000000000000..552a65a0cf2b --- /dev/null +++ b/arch/mips/include/asm/bmips.h @@ -0,0 +1,110 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com) + * + * Definitions for BMIPS processors + */ +#ifndef _ASM_BMIPS_H +#define _ASM_BMIPS_H + +#include <linux/compiler.h> +#include <linux/linkage.h> +#include <asm/addrspace.h> +#include <asm/mipsregs.h> +#include <asm/hazards.h> + +/* NOTE: the CBR register returns a PA, and it can be above 0xff00_0000 */ +#define BMIPS_GET_CBR() ((void __iomem *)(CKSEG1 | \ + (unsigned long) \ + ((read_c0_brcm_cbr() >> 18) << 18))) + +#define BMIPS_RAC_CONFIG 0x00000000 +#define BMIPS_RAC_ADDRESS_RANGE 0x00000004 +#define BMIPS_RAC_CONFIG_1 0x00000008 +#define BMIPS_L2_CONFIG 0x0000000c +#define BMIPS_LMB_CONTROL 0x0000001c +#define BMIPS_SYSTEM_BASE 0x00000020 +#define BMIPS_PERF_GLOBAL_CONTROL 0x00020000 +#define BMIPS_PERF_CONTROL_0 0x00020004 +#define BMIPS_PERF_CONTROL_1 0x00020008 +#define BMIPS_PERF_COUNTER_0 0x00020010 +#define BMIPS_PERF_COUNTER_1 0x00020014 +#define BMIPS_PERF_COUNTER_2 0x00020018 +#define BMIPS_PERF_COUNTER_3 0x0002001c +#define BMIPS_RELO_VECTOR_CONTROL_0 0x00030000 +#define BMIPS_RELO_VECTOR_CONTROL_1 0x00038000 + +#define BMIPS_NMI_RESET_VEC 0x80000000 +#define BMIPS_WARM_RESTART_VEC 0x80000380 + +#define ZSCM_REG_BASE 0x97000000 + +#if !defined(__ASSEMBLY__) + +#include <linux/cpumask.h> +#include <asm/r4kcache.h> + +extern struct plat_smp_ops bmips_smp_ops; +extern char bmips_reset_nmi_vec; +extern char bmips_reset_nmi_vec_end; +extern char bmips_smp_movevec; +extern char bmips_smp_int_vec; +extern char bmips_smp_int_vec_end; + +extern int bmips_smp_enabled; +extern int bmips_cpu_offset; +extern cpumask_t bmips_booted_mask; + +extern void bmips_ebase_setup(void); +extern asmlinkage void plat_wired_tlb_setup(void); + +static inline unsigned long bmips_read_zscm_reg(unsigned int offset) +{ + unsigned long ret; + + __asm__ __volatile__( + ".set push\n" + ".set noreorder\n" + "cache %1, 0(%2)\n" + "sync\n" + "_ssnop\n" + "_ssnop\n" + "_ssnop\n" + "_ssnop\n" + "_ssnop\n" + "_ssnop\n" + "_ssnop\n" + "mfc0 %0, $28, 3\n" + "_ssnop\n" + ".set pop\n" + : "=&r" (ret) + : "i" (Index_Load_Tag_S), "r" (ZSCM_REG_BASE + offset) + : "memory"); + return ret; +} + +static inline void bmips_write_zscm_reg(unsigned int offset, unsigned long data) +{ + __asm__ __volatile__( + ".set push\n" + ".set noreorder\n" + "mtc0 %0, $28, 3\n" + "_ssnop\n" + "_ssnop\n" + "_ssnop\n" + "cache %1, 0(%2)\n" + "_ssnop\n" + "_ssnop\n" + "_ssnop\n" + : /* no outputs */ + : "r" (data), + "i" (Index_Store_Tag_S), "r" (ZSCM_REG_BASE + offset) + : "memory"); +} + +#endif /* !defined(__ASSEMBLY__) */ + +#endif /* _ASM_BMIPS_H */ diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index 35cd1bab69c3..7a51d879e6ca 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -86,6 +86,7 @@ extern unsigned long mips_machtype; #define BOOT_MEM_RAM 1 #define BOOT_MEM_ROM_DATA 2 #define BOOT_MEM_RESERVED 3 +#define BOOT_MEM_INIT_RAM 4 /* * A memory map that's built upon what was determined diff --git a/arch/mips/include/asm/branch.h b/arch/mips/include/asm/branch.h index 37c6857c8d4a..888766ae1f85 100644 --- a/arch/mips/include/asm/branch.h +++ b/arch/mips/include/asm/branch.h @@ -9,6 +9,7 @@ #define _ASM_BRANCH_H #include <asm/ptrace.h> +#include <asm/inst.h> static inline int delay_slot(struct pt_regs *regs) { @@ -23,7 +24,11 @@ static inline unsigned long exception_epc(struct pt_regs *regs) return regs->cp0_epc + 4; } +#define BRANCH_LIKELY_TAKEN 0x0001 + extern int __compute_return_epc(struct pt_regs *regs); +extern int __compute_return_epc_for_insn(struct pt_regs *regs, + union mips_instruction insn); static inline int compute_return_epc(struct pt_regs *regs) { diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 2f7f41873f24..f9fa2a479dd0 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -169,6 +169,10 @@ #define PRID_IMP_NETLOGIC_XLS412B 0x4c00 #define PRID_IMP_NETLOGIC_XLS408B 0x4e00 #define PRID_IMP_NETLOGIC_XLS404B 0x4f00 +#define PRID_IMP_NETLOGIC_AU13XX 0x8000 + +#define PRID_IMP_NETLOGIC_XLP8XX 0x1000 +#define PRID_IMP_NETLOGIC_XLP3XX 0x1100 /* * Definitions for 7:0 on legacy processors @@ -263,7 +267,7 @@ enum cpu_type_enum { */ CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2, - CPU_XLR, + CPU_XLR, CPU_XLP, CPU_LAST }; diff --git a/arch/mips/include/asm/gio_device.h b/arch/mips/include/asm/gio_device.h new file mode 100644 index 000000000000..5437c84664bf --- /dev/null +++ b/arch/mips/include/asm/gio_device.h @@ -0,0 +1,56 @@ +#include <linux/device.h> +#include <linux/mod_devicetable.h> + +struct gio_device_id { + __u8 id; +}; + +struct gio_device { + struct device dev; + struct resource resource; + unsigned int irq; + unsigned int slotno; + + const char *name; + struct gio_device_id id; + unsigned id32:1; + unsigned gio64:1; +}; +#define to_gio_device(d) container_of(d, struct gio_device, dev) + +struct gio_driver { + const char *name; + struct module *owner; + const struct gio_device_id *id_table; + + int (*probe)(struct gio_device *, const struct gio_device_id *); + void (*remove)(struct gio_device *); + int (*suspend)(struct gio_device *, pm_message_t); + int (*resume)(struct gio_device *); + void (*shutdown)(struct gio_device *); + + struct device_driver driver; +}; +#define to_gio_driver(drv) container_of(drv, struct gio_driver, driver) + +extern const struct gio_device_id *gio_match_device(const struct gio_device_id *, + const struct gio_device *); +extern struct gio_device *gio_dev_get(struct gio_device *); +extern void gio_dev_put(struct gio_device *); + +extern int gio_device_register(struct gio_device *); +extern void gio_device_unregister(struct gio_device *); +extern void gio_release_dev(struct device *); + +static inline void gio_device_free(struct gio_device *dev) +{ + gio_release_dev(&dev->dev); +} + +extern int gio_register_driver(struct gio_driver *); +extern void gio_unregister_driver(struct gio_driver *); + +#define gio_get_drvdata(_dev) drv_get_drvdata(&(_dev)->dev) +#define gio_set_drvdata(_dev, data) drv_set_drvdata(&(_dev)->dev, (data)) + +extern void gio_set_master(struct gio_device *); diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h index 4e332165d7b7..b4c20e4f87cd 100644 --- a/arch/mips/include/asm/hazards.h +++ b/arch/mips/include/asm/hazards.h @@ -87,7 +87,8 @@ do { \ : "=r" (tmp)); \ } while (0) -#elif defined(CONFIG_CPU_MIPSR1) && !defined(CONFIG_MIPS_ALCHEMY) +#elif (defined(CONFIG_CPU_MIPSR1) && !defined(CONFIG_MIPS_ALCHEMY)) || \ + defined(CONFIG_CPU_BMIPS) /* * These are slightly complicated by the fact that we guarantee R1 kernels to @@ -139,8 +140,8 @@ do { \ } while (0) #elif defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ - defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \ - defined(CONFIG_CPU_R5500) + defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \ + defined(CONFIG_CPU_R5500) /* * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. diff --git a/arch/mips/include/asm/hugetlb.h b/arch/mips/include/asm/hugetlb.h index c565b7c3f0b5..58d36889f09b 100644 --- a/arch/mips/include/asm/hugetlb.h +++ b/arch/mips/include/asm/hugetlb.h @@ -70,7 +70,7 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) { - flush_tlb_mm(vma->vm_mm); + flush_tlb_page(vma, addr & huge_page_mask(hstate_vma(vma))); } static inline int huge_pte_none(pte_t pte) diff --git a/arch/mips/include/asm/kprobes.h b/arch/mips/include/asm/kprobes.h index e6ea4d4d7205..1fbbca01e681 100644 --- a/arch/mips/include/asm/kprobes.h +++ b/arch/mips/include/asm/kprobes.h @@ -74,6 +74,8 @@ struct prev_kprobe { : MAX_JPROBES_STACK_SIZE) +#define SKIP_DELAYSLOT 0x0001 + /* per-cpu kprobe control block */ struct kprobe_ctlblk { unsigned long kprobe_status; @@ -82,6 +84,9 @@ struct kprobe_ctlblk { unsigned long kprobe_saved_epc; unsigned long jprobe_saved_sp; struct pt_regs jprobe_saved_regs; + /* Per-thread fields, used while emulating branches */ + unsigned long flags; + unsigned long target_epc; u8 jprobes_stack[MAX_JPROBES_STACK_SIZE]; struct prev_kprobe prev_kprobe; }; diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h index cda1c8070b27..2f0becb4ec8f 100644 --- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h @@ -20,6 +20,10 @@ #include <linux/bitops.h> #define AR71XX_APB_BASE 0x18000000 +#define AR71XX_EHCI_BASE 0x1b000000 +#define AR71XX_EHCI_SIZE 0x1000 +#define AR71XX_OHCI_BASE 0x1c000000 +#define AR71XX_OHCI_SIZE 0x1000 #define AR71XX_SPI_BASE 0x1f000000 #define AR71XX_SPI_SIZE 0x01000000 @@ -27,6 +31,8 @@ #define AR71XX_DDR_CTRL_SIZE 0x100 #define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000) #define AR71XX_UART_SIZE 0x100 +#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) +#define AR71XX_USB_CTRL_SIZE 0x100 #define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000) #define AR71XX_GPIO_SIZE 0x100 #define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000) @@ -34,9 +40,26 @@ #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) #define AR71XX_RESET_SIZE 0x100 +#define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) +#define AR7240_USB_CTRL_SIZE 0x100 +#define AR7240_OHCI_BASE 0x1b000000 +#define AR7240_OHCI_SIZE 0x1000 + +#define AR724X_EHCI_BASE 0x1b000000 +#define AR724X_EHCI_SIZE 0x1000 + +#define AR913X_EHCI_BASE 0x1b000000 +#define AR913X_EHCI_SIZE 0x1000 #define AR913X_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000) #define AR913X_WMAC_SIZE 0x30000 +#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) +#define AR933X_UART_SIZE 0x14 +#define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) +#define AR933X_WMAC_SIZE 0x20000 +#define AR933X_EHCI_BASE 0x1b000000 +#define AR933X_EHCI_SIZE 0x1000 + /* * DDR_CTRL block */ @@ -63,6 +86,11 @@ #define AR913X_DDR_REG_FLUSH_USB 0x84 #define AR913X_DDR_REG_FLUSH_WMAC 0x88 +#define AR933X_DDR_REG_FLUSH_GE0 0x7c +#define AR933X_DDR_REG_FLUSH_GE1 0x80 +#define AR933X_DDR_REG_FLUSH_USB 0x84 +#define AR933X_DDR_REG_FLUSH_WMAC 0x88 + /* * PLL block */ @@ -104,6 +132,30 @@ #define AR913X_AHB_DIV_SHIFT 19 #define AR913X_AHB_DIV_MASK 0x1 +#define AR933X_PLL_CPU_CONFIG_REG 0x00 +#define AR933X_PLL_CLOCK_CTRL_REG 0x08 + +#define AR933X_PLL_CPU_CONFIG_NINT_SHIFT 10 +#define AR933X_PLL_CPU_CONFIG_NINT_MASK 0x3f +#define AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT 16 +#define AR933X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f +#define AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT 23 +#define AR933X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 + +#define AR933X_PLL_CLOCK_CTRL_BYPASS BIT(2) +#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT 5 +#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK 0x3 +#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT 10 +#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK 0x3 +#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15 +#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7 + +/* + * USB_CONFIG block + */ +#define AR71XX_USB_CTRL_REG_FLADJ 0x00 +#define AR71XX_USB_CTRL_REG_CONFIG 0x04 + /* * RESET block */ @@ -130,6 +182,13 @@ #define AR724X_RESET_REG_RESET_MODULE 0x1c +#define AR933X_RESET_REG_RESET_MODULE 0x1c +#define AR933X_RESET_REG_BOOTSTRAP 0xac + +#define MISC_INT_ETHSW BIT(12) +#define MISC_INT_TIMER4 BIT(10) +#define MISC_INT_TIMER3 BIT(9) +#define MISC_INT_TIMER2 BIT(8) #define MISC_INT_DMA BIT(7) #define MISC_INT_OHCI BIT(6) #define MISC_INT_PERFC BIT(5) @@ -158,14 +217,29 @@ #define AR71XX_RESET_PCI_BUS BIT(1) #define AR71XX_RESET_PCI_CORE BIT(0) +#define AR7240_RESET_USB_HOST BIT(5) +#define AR7240_RESET_OHCI_DLL BIT(3) + #define AR724X_RESET_GE1_MDIO BIT(23) #define AR724X_RESET_GE0_MDIO BIT(22) #define AR724X_RESET_PCIE_PHY_SERIAL BIT(10) #define AR724X_RESET_PCIE_PHY BIT(7) #define AR724X_RESET_PCIE BIT(6) -#define AR724X_RESET_OHCI_DLL BIT(3) +#define AR724X_RESET_USB_HOST BIT(5) +#define AR724X_RESET_USB_PHY BIT(4) +#define AR724X_RESET_USBSUS_OVERRIDE BIT(3) #define AR913X_RESET_AMBA2WMAC BIT(22) +#define AR913X_RESET_USBSUS_OVERRIDE BIT(10) +#define AR913X_RESET_USB_HOST BIT(5) +#define AR913X_RESET_USB_PHY BIT(4) + +#define AR933X_RESET_WMAC BIT(11) +#define AR933X_RESET_USB_HOST BIT(5) +#define AR933X_RESET_USB_PHY BIT(4) +#define AR933X_RESET_USBSUS_OVERRIDE BIT(3) + +#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) #define REV_ID_MAJOR_MASK 0xfff0 #define REV_ID_MAJOR_AR71XX 0x00a0 @@ -173,6 +247,8 @@ #define REV_ID_MAJOR_AR7240 0x00c0 #define REV_ID_MAJOR_AR7241 0x0100 #define REV_ID_MAJOR_AR7242 0x1100 +#define REV_ID_MAJOR_AR9330 0x0110 +#define REV_ID_MAJOR_AR9331 0x1110 #define AR71XX_REV_ID_MINOR_MASK 0x3 #define AR71XX_REV_ID_MINOR_AR7130 0x0 @@ -187,6 +263,8 @@ #define AR913X_REV_ID_REVISION_MASK 0x3 #define AR913X_REV_ID_REVISION_SHIFT 2 +#define AR933X_REV_ID_REVISION_MASK 0x3 + #define AR724X_REV_ID_REVISION_MASK 0x3 /* @@ -229,5 +307,6 @@ #define AR71XX_GPIO_COUNT 16 #define AR724X_GPIO_COUNT 18 #define AR913X_GPIO_COUNT 22 +#define AR933X_GPIO_COUNT 30 #endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/arch/mips/include/asm/mach-ath79/ar933x_uart.h b/arch/mips/include/asm/mach-ath79/ar933x_uart.h new file mode 100644 index 000000000000..52730555937f --- /dev/null +++ b/arch/mips/include/asm/mach-ath79/ar933x_uart.h @@ -0,0 +1,67 @@ +/* + * Atheros AR933X UART defines + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __AR933X_UART_H +#define __AR933X_UART_H + +#define AR933X_UART_REGS_SIZE 20 +#define AR933X_UART_FIFO_SIZE 16 + +#define AR933X_UART_DATA_REG 0x00 +#define AR933X_UART_CS_REG 0x04 +#define AR933X_UART_CLOCK_REG 0x08 +#define AR933X_UART_INT_REG 0x0c +#define AR933X_UART_INT_EN_REG 0x10 + +#define AR933X_UART_DATA_TX_RX_MASK 0xff +#define AR933X_UART_DATA_RX_CSR BIT(8) +#define AR933X_UART_DATA_TX_CSR BIT(9) + +#define AR933X_UART_CS_PARITY_S 0 +#define AR933X_UART_CS_PARITY_M 0x3 +#define AR933X_UART_CS_PARITY_NONE 0 +#define AR933X_UART_CS_PARITY_ODD 1 +#define AR933X_UART_CS_PARITY_EVEN 2 +#define AR933X_UART_CS_IF_MODE_S 2 +#define AR933X_UART_CS_IF_MODE_M 0x3 +#define AR933X_UART_CS_IF_MODE_NONE 0 +#define AR933X_UART_CS_IF_MODE_DTE 1 +#define AR933X_UART_CS_IF_MODE_DCE 2 +#define AR933X_UART_CS_FLOW_CTRL_S 4 +#define AR933X_UART_CS_FLOW_CTRL_M 0x3 +#define AR933X_UART_CS_DMA_EN BIT(6) +#define AR933X_UART_CS_TX_READY_ORIDE BIT(7) +#define AR933X_UART_CS_RX_READY_ORIDE BIT(8) +#define AR933X_UART_CS_TX_READY BIT(9) +#define AR933X_UART_CS_RX_BREAK BIT(10) +#define AR933X_UART_CS_TX_BREAK BIT(11) +#define AR933X_UART_CS_HOST_INT BIT(12) +#define AR933X_UART_CS_HOST_INT_EN BIT(13) +#define AR933X_UART_CS_TX_BUSY BIT(14) +#define AR933X_UART_CS_RX_BUSY BIT(15) + +#define AR933X_UART_CLOCK_STEP_M 0xffff +#define AR933X_UART_CLOCK_SCALE_M 0xfff +#define AR933X_UART_CLOCK_SCALE_S 16 +#define AR933X_UART_CLOCK_STEP_M 0xffff + +#define AR933X_UART_INT_RX_VALID BIT(0) +#define AR933X_UART_INT_TX_READY BIT(1) +#define AR933X_UART_INT_RX_FRAMING_ERR BIT(2) +#define AR933X_UART_INT_RX_OFLOW_ERR BIT(3) +#define AR933X_UART_INT_TX_OFLOW_ERR BIT(4) +#define AR933X_UART_INT_RX_PARITY_ERR BIT(5) +#define AR933X_UART_INT_RX_BREAK_ON BIT(6) +#define AR933X_UART_INT_RX_BREAK_OFF BIT(7) +#define AR933X_UART_INT_RX_FULL BIT(8) +#define AR933X_UART_INT_TX_EMPTY BIT(9) +#define AR933X_UART_INT_ALLINTS 0x3ff + +#endif /* __AR933X_UART_H */ diff --git a/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h b/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h new file mode 100644 index 000000000000..6cb30f2b7198 --- /dev/null +++ b/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h @@ -0,0 +1,18 @@ +/* + * Platform data definition for Atheros AR933X UART + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR933X_UART_PLATFORM_H +#define _AR933X_UART_PLATFORM_H + +struct ar933x_uart_platform_data { + unsigned uartclk; +}; + +#endif /* _AR933X_UART_PLATFORM_H */ diff --git a/arch/mips/include/asm/mach-ath79/ath79.h b/arch/mips/include/asm/mach-ath79/ath79.h index 6a9f168506fe..6d0c6c9d5622 100644 --- a/arch/mips/include/asm/mach-ath79/ath79.h +++ b/arch/mips/include/asm/mach-ath79/ath79.h @@ -26,10 +26,13 @@ enum ath79_soc_type { ATH79_SOC_AR7241, ATH79_SOC_AR7242, ATH79_SOC_AR9130, - ATH79_SOC_AR9132 + ATH79_SOC_AR9132, + ATH79_SOC_AR9330, + ATH79_SOC_AR9331, }; extern enum ath79_soc_type ath79_soc; +extern unsigned int ath79_soc_rev; static inline int soc_is_ar71xx(void) { @@ -66,6 +69,12 @@ static inline int soc_is_ar913x(void) ath79_soc == ATH79_SOC_AR9132); } +static inline int soc_is_ar933x(void) +{ + return (ath79_soc == ATH79_SOC_AR9330 || + ath79_soc == ATH79_SOC_AR9331); +} + extern void __iomem *ath79_ddr_base; extern void __iomem *ath79_pll_base; extern void __iomem *ath79_reset_base; diff --git a/arch/mips/include/asm/mach-ath79/irq.h b/arch/mips/include/asm/mach-ath79/irq.h index 189bc6eb9c10..519958fe4e3c 100644 --- a/arch/mips/include/asm/mach-ath79/irq.h +++ b/arch/mips/include/asm/mach-ath79/irq.h @@ -10,10 +10,10 @@ #define __ASM_MACH_ATH79_IRQ_H #define MIPS_CPU_IRQ_BASE 0 -#define NR_IRQS 16 +#define NR_IRQS 40 #define ATH79_MISC_IRQ_BASE 8 -#define ATH79_MISC_IRQ_COUNT 8 +#define ATH79_MISC_IRQ_COUNT 32 #define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2) #define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3) @@ -30,6 +30,10 @@ #define ATH79_MISC_IRQ_PERFC (ATH79_MISC_IRQ_BASE + 5) #define ATH79_MISC_IRQ_OHCI (ATH79_MISC_IRQ_BASE + 6) #define ATH79_MISC_IRQ_DMA (ATH79_MISC_IRQ_BASE + 7) +#define ATH79_MISC_IRQ_TIMER2 (ATH79_MISC_IRQ_BASE + 8) +#define ATH79_MISC_IRQ_TIMER3 (ATH79_MISC_IRQ_BASE + 9) +#define ATH79_MISC_IRQ_TIMER4 (ATH79_MISC_IRQ_BASE + 10) +#define ATH79_MISC_IRQ_ETHSW (ATH79_MISC_IRQ_BASE + 12) #include_next <irq.h> diff --git a/arch/mips/include/asm/mach-ath79/pci-ath724x.h b/arch/mips/include/asm/mach-ath79/pci-ath724x.h new file mode 100644 index 000000000000..454885fa30c3 --- /dev/null +++ b/arch/mips/include/asm/mach-ath79/pci-ath724x.h @@ -0,0 +1,21 @@ +/* + * Atheros 724x PCI support + * + * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H +#define __ASM_MACH_ATH79_PCI_ATH724X_H + +struct ath724x_pci_data { + int irq; + void *pdata; +}; + +void ath724x_pci_add_data(struct ath724x_pci_data *data, int size); + +#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */ diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index de24ec57dd2f..569828d3ccab 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -136,6 +136,7 @@ static inline int au1xxx_cpu_needs_config_od(void) #define ALCHEMY_CPU_AU1100 2 #define ALCHEMY_CPU_AU1550 3 #define ALCHEMY_CPU_AU1200 4 +#define ALCHEMY_CPU_AU1300 5 static inline int alchemy_get_cputype(void) { @@ -156,6 +157,9 @@ static inline int alchemy_get_cputype(void) case 0x05030000: return ALCHEMY_CPU_AU1200; break; + case 0x800c0000: + return ALCHEMY_CPU_AU1300; + break; } return ALCHEMY_CPU_UNKNOWN; @@ -166,6 +170,7 @@ static inline int alchemy_get_uarts(int type) { switch (type) { case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1300: return 4; case ALCHEMY_CPU_AU1500: case ALCHEMY_CPU_AU1200: @@ -243,6 +248,7 @@ extern unsigned long au1xxx_calc_clock(void); /* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */ void alchemy_sleep_au1000(void); void alchemy_sleep_au1550(void); +void alchemy_sleep_au1300(void); void au_sleep(void); /* USB: drivers/usb/host/alchemy-common.c */ @@ -251,6 +257,7 @@ enum alchemy_usb_block { ALCHEMY_USB_UDC0, ALCHEMY_USB_EHCI0, ALCHEMY_USB_OTG0, + ALCHEMY_USB_OHCI1, }; int alchemy_usb_control(int block, int enable); @@ -263,14 +270,92 @@ struct alchemy_pci_platdata { unsigned long pci_cfg_clr; }; -/* SOC Interrupt numbers */ +/* Multifunction pins: Each of these pins can either be assigned to the + * GPIO controller or a on-chip peripheral. + * Call "au1300_pinfunc_to_dev()" or "au1300_pinfunc_to_gpio()" to + * assign one of these to either the GPIO controller or the device. + */ +enum au1300_multifunc_pins { + /* wake-from-str pins 0-3 */ + AU1300_PIN_WAKE0 = 0, AU1300_PIN_WAKE1, AU1300_PIN_WAKE2, + AU1300_PIN_WAKE3, + /* external clock sources for PSCs: 4-5 */ + AU1300_PIN_EXTCLK0, AU1300_PIN_EXTCLK1, + /* 8bit MMC interface on SD0: 6-9 */ + AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6, + AU1300_PIN_SD0DAT7, + /* aux clk input for freqgen 3: 10 */ + AU1300_PIN_FG3AUX, + /* UART1 pins: 11-18 */ + AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR, + AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR, + AU1300_PIN_U1RX, AU1300_PIN_U1TX, + /* UART0 pins: 19-24 */ + AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR, + AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR, + /* UART2: 25-26 */ + AU1300_PIN_U2RX, AU1300_PIN_U2TX, + /* UART3: 27-28 */ + AU1300_PIN_U3RX, AU1300_PIN_U3TX, + /* LCD controller PWMs, ext pixclock: 29-31 */ + AU1300_PIN_LCDPWM0, AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN, + /* SD1 interface: 32-37 */ + AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2, + AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK, + /* SD2 interface: 38-43 */ + AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2, + AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK, + /* PSC0/1 clocks: 44-45 */ + AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK, + /* PSCs: 46-49/50-53/54-57/58-61 */ + AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0, + AU1300_PIN_PSC0D1, + AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0, + AU1300_PIN_PSC1D1, + AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_PSC2D0, + AU1300_PIN_PSC2D1, + AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0, + AU1300_PIN_PSC3D1, + /* PCMCIA interface: 62-70 */ + AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16, + AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT, + AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW, + /* camera interface H/V sync inputs: 71-72 */ + AU1300_PIN_CIMLS, AU1300_PIN_CIMFS, + /* PSC2/3 clocks: 73-74 */ + AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK, +}; + +/* GPIC (Au1300) pin management: arch/mips/alchemy/common/gpioint.c */ +extern void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio); +extern void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio); +extern void au1300_set_irq_priority(unsigned int irq, int p); +extern void au1300_set_dbdma_gpio(int dchan, unsigned int gpio); + +/* Au1300 allows to disconnect certain blocks from internal power supply */ +enum au1300_vss_block { + AU1300_VSS_MPE = 0, + AU1300_VSS_BSA, + AU1300_VSS_GPE, + AU1300_VSS_MGP, +}; +extern void au1300_vss_block_control(int block, int enable); + + +/* SOC Interrupt numbers */ +/* Au1000-style (IC0/1): 2 controllers with 32 sources each */ #define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8) #define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31) #define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_LAST + 1) #define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31) #define AU1000_MAX_INTR AU1000_INTC1_INT_LAST +/* Au1300-style (GPIC): 1 controller with up to 128 sources */ +#define ALCHEMY_GPIC_INT_BASE (MIPS_CPU_IRQ_BASE + 8) +#define ALCHEMY_GPIC_INT_NUM 128 +#define ALCHEMY_GPIC_INT_LAST (ALCHEMY_GPIC_INT_BASE + ALCHEMY_GPIC_INT_NUM - 1) + enum soc_au1000_ints { AU1000_FIRST_INT = AU1000_INTC0_INT_BASE, AU1000_UART0_INT = AU1000_FIRST_INT, @@ -591,24 +676,77 @@ enum soc_au1200_ints { #endif /* !defined (_LANGUAGE_ASSEMBLY) */ +/* Au1300 peripheral interrupt numbers */ +#define AU1300_FIRST_INT (ALCHEMY_GPIC_INT_BASE) +#define AU1300_UART1_INT (AU1300_FIRST_INT + 17) +#define AU1300_UART2_INT (AU1300_FIRST_INT + 25) +#define AU1300_UART3_INT (AU1300_FIRST_INT + 27) +#define AU1300_SD1_INT (AU1300_FIRST_INT + 32) +#define AU1300_SD2_INT (AU1300_FIRST_INT + 38) +#define AU1300_PSC0_INT (AU1300_FIRST_INT + 48) +#define AU1300_PSC1_INT (AU1300_FIRST_INT + 52) +#define AU1300_PSC2_INT (AU1300_FIRST_INT + 56) +#define AU1300_PSC3_INT (AU1300_FIRST_INT + 60) +#define AU1300_NAND_INT (AU1300_FIRST_INT + 62) +#define AU1300_DDMA_INT (AU1300_FIRST_INT + 75) +#define AU1300_MMU_INT (AU1300_FIRST_INT + 76) +#define AU1300_MPU_INT (AU1300_FIRST_INT + 77) +#define AU1300_GPU_INT (AU1300_FIRST_INT + 78) +#define AU1300_UDMA_INT (AU1300_FIRST_INT + 79) +#define AU1300_TOY_INT (AU1300_FIRST_INT + 80) +#define AU1300_TOY_MATCH0_INT (AU1300_FIRST_INT + 81) +#define AU1300_TOY_MATCH1_INT (AU1300_FIRST_INT + 82) +#define AU1300_TOY_MATCH2_INT (AU1300_FIRST_INT + 83) +#define AU1300_RTC_INT (AU1300_FIRST_INT + 84) +#define AU1300_RTC_MATCH0_INT (AU1300_FIRST_INT + 85) +#define AU1300_RTC_MATCH1_INT (AU1300_FIRST_INT + 86) +#define AU1300_RTC_MATCH2_INT (AU1300_FIRST_INT + 87) +#define AU1300_UART0_INT (AU1300_FIRST_INT + 88) +#define AU1300_SD0_INT (AU1300_FIRST_INT + 89) +#define AU1300_USB_INT (AU1300_FIRST_INT + 90) +#define AU1300_LCD_INT (AU1300_FIRST_INT + 91) +#define AU1300_BSA_INT (AU1300_FIRST_INT + 92) +#define AU1300_MPE_INT (AU1300_FIRST_INT + 93) +#define AU1300_ITE_INT (AU1300_FIRST_INT + 94) +#define AU1300_AES_INT (AU1300_FIRST_INT + 95) +#define AU1300_CIM_INT (AU1300_FIRST_INT + 96) + +/**********************************************************************/ + /* * Physical base addresses for integrated peripherals - * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 + * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 5..au1300 */ #define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */ +#define AU1300_ROM_PHYS_ADDR 0x10000000 /* 5 */ +#define AU1300_OTP_PHYS_ADDR 0x10002000 /* 5 */ +#define AU1300_VSS_PHYS_ADDR 0x10003000 /* 5 */ +#define AU1300_UART0_PHYS_ADDR 0x10100000 /* 5 */ +#define AU1300_UART1_PHYS_ADDR 0x10101000 /* 5 */ +#define AU1300_UART2_PHYS_ADDR 0x10102000 /* 5 */ +#define AU1300_UART3_PHYS_ADDR 0x10103000 /* 5 */ #define AU1000_USB_OHCI_PHYS_ADDR 0x10100000 /* 012 */ #define AU1000_USB_UDC_PHYS_ADDR 0x10200000 /* 0123 */ +#define AU1300_GPIC_PHYS_ADDR 0x10200000 /* 5 */ #define AU1000_IRDA_PHYS_ADDR 0x10300000 /* 02 */ -#define AU1200_AES_PHYS_ADDR 0x10300000 /* 4 */ +#define AU1200_AES_PHYS_ADDR 0x10300000 /* 45 */ #define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */ +#define AU1300_GPU_PHYS_ADDR 0x10500000 /* 5 */ #define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */ #define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */ #define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */ -#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 24 */ +#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 245 */ +#define AU1300_SD1_PHYS_ADDR 0x10601000 /* 5 */ +#define AU1300_SD2_PHYS_ADDR 0x10602000 /* 5 */ #define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */ +#define AU1300_SYS_PHYS_ADDR 0x10900000 /* 5 */ #define AU1550_PSC2_PHYS_ADDR 0x10A00000 /* 3 */ #define AU1550_PSC3_PHYS_ADDR 0x10B00000 /* 3 */ +#define AU1300_PSC0_PHYS_ADDR 0x10A00000 /* 5 */ +#define AU1300_PSC1_PHYS_ADDR 0x10A01000 /* 5 */ +#define AU1300_PSC2_PHYS_ADDR 0x10A02000 /* 5 */ +#define AU1300_PSC3_PHYS_ADDR 0x10A03000 /* 5 */ #define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */ #define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */ #define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */ @@ -622,37 +760,96 @@ enum soc_au1200_ints { #define AU1000_SSI1_PHYS_ADDR 0x11680000 /* 02 */ #define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */ #define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */ -#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 01234 */ +#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 012345 */ #define AU1550_PSC0_PHYS_ADDR 0x11A00000 /* 34 */ #define AU1550_PSC1_PHYS_ADDR 0x11B00000 /* 34 */ #define AU1000_MEM_PHYS_ADDR 0x14000000 /* 01234 */ #define AU1000_STATIC_MEM_PHYS_ADDR 0x14001000 /* 01234 */ +#define AU1300_UDMA_PHYS_ADDR 0x14001800 /* 5 */ #define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */ -#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */ -#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */ +#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 345 */ +#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 345 */ #define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */ #define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */ -#define AU1200_CIM_PHYS_ADDR 0x14004000 /* 4 */ +#define AU1200_CIM_PHYS_ADDR 0x14004000 /* 45 */ #define AU1500_PCI_PHYS_ADDR 0x14005000 /* 13 */ #define AU1550_PE_PHYS_ADDR 0x14008000 /* 3 */ #define AU1200_MAEBE_PHYS_ADDR 0x14010000 /* 4 */ #define AU1200_MAEFE_PHYS_ADDR 0x14012000 /* 4 */ +#define AU1300_MAEITE_PHYS_ADDR 0x14010000 /* 5 */ +#define AU1300_MAEMPE_PHYS_ADDR 0x14014000 /* 5 */ #define AU1550_USB_OHCI_PHYS_ADDR 0x14020000 /* 3 */ #define AU1200_USB_CTL_PHYS_ADDR 0x14020000 /* 4 */ #define AU1200_USB_OTG_PHYS_ADDR 0x14020020 /* 4 */ #define AU1200_USB_OHCI_PHYS_ADDR 0x14020100 /* 4 */ #define AU1200_USB_EHCI_PHYS_ADDR 0x14020200 /* 4 */ #define AU1200_USB_UDC_PHYS_ADDR 0x14022000 /* 4 */ +#define AU1300_USB_EHCI_PHYS_ADDR 0x14020000 /* 5 */ +#define AU1300_USB_OHCI0_PHYS_ADDR 0x14020400 /* 5 */ +#define AU1300_USB_OHCI1_PHYS_ADDR 0x14020800 /* 5 */ +#define AU1300_USB_CTL_PHYS_ADDR 0x14021000 /* 5 */ +#define AU1300_USB_OTG_PHYS_ADDR 0x14022000 /* 5 */ +#define AU1300_MAEBSA_PHYS_ADDR 0x14030000 /* 5 */ #define AU1100_LCD_PHYS_ADDR 0x15000000 /* 2 */ -#define AU1200_LCD_PHYS_ADDR 0x15000000 /* 4 */ +#define AU1200_LCD_PHYS_ADDR 0x15000000 /* 45 */ #define AU1500_PCI_MEM_PHYS_ADDR 0x400000000ULL /* 13 */ #define AU1500_PCI_IO_PHYS_ADDR 0x500000000ULL /* 13 */ #define AU1500_PCI_CONFIG0_PHYS_ADDR 0x600000000ULL /* 13 */ #define AU1500_PCI_CONFIG1_PHYS_ADDR 0x680000000ULL /* 13 */ -#define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 01234 */ -#define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 01234 */ -#define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 01234 */ +#define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 012345 */ +#define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 012345 */ +#define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 012345 */ +/**********************************************************************/ + + +/* + * Au1300 GPIO+INT controller (GPIC) register offsets and bits + * Registers are 128bits (0x10 bytes), divided into 4 "banks". + */ +#define AU1300_GPIC_PINVAL 0x0000 +#define AU1300_GPIC_PINVALCLR 0x0010 +#define AU1300_GPIC_IPEND 0x0020 +#define AU1300_GPIC_PRIENC 0x0030 +#define AU1300_GPIC_IEN 0x0040 /* int_mask in manual */ +#define AU1300_GPIC_IDIS 0x0050 /* int_maskclr in manual */ +#define AU1300_GPIC_DMASEL 0x0060 +#define AU1300_GPIC_DEVSEL 0x0080 +#define AU1300_GPIC_DEVCLR 0x0090 +#define AU1300_GPIC_RSTVAL 0x00a0 +/* pin configuration space. one 32bit register for up to 128 IRQs */ +#define AU1300_GPIC_PINCFG 0x1000 + +#define GPIC_GPIO_TO_BIT(gpio) \ + (1 << ((gpio) & 0x1f)) + +#define GPIC_GPIO_BANKOFF(gpio) \ + (((gpio) >> 5) * 4) + +/* Pin Control bits: who owns the pin, what does it do */ +#define GPIC_CFG_PC_GPIN 0 +#define GPIC_CFG_PC_DEV 1 +#define GPIC_CFG_PC_GPOLOW 2 +#define GPIC_CFG_PC_GPOHIGH 3 +#define GPIC_CFG_PC_MASK 3 + +/* assign pin to MIPS IRQ line */ +#define GPIC_CFG_IL_SET(x) (((x) & 3) << 2) +#define GPIC_CFG_IL_MASK (3 << 2) + +/* pin interrupt type setup */ +#define GPIC_CFG_IC_OFF (0 << 4) +#define GPIC_CFG_IC_LEVEL_LOW (1 << 4) +#define GPIC_CFG_IC_LEVEL_HIGH (2 << 4) +#define GPIC_CFG_IC_EDGE_FALL (5 << 4) +#define GPIC_CFG_IC_EDGE_RISE (6 << 4) +#define GPIC_CFG_IC_EDGE_BOTH (7 << 4) +#define GPIC_CFG_IC_MASK (7 << 4) + +/* allow interrupt to wake cpu from 'wait' */ +#define GPIC_CFG_IDLEWAKE (1 << 7) + +/***********************************************************************/ /* Au1000 SDRAM memory controller register offsets */ #define AU1000_MEM_SDMODE0 0x0000 @@ -1068,44 +1265,20 @@ enum soc_au1200_ints { #define SSI_ENABLE_CD (1 << 1) #define SSI_ENABLE_E (1 << 0) -/* IrDA Controller */ -#define IRDA_BASE 0xB0300000 -#define IR_RING_PTR_STATUS (IRDA_BASE + 0x00) -#define IR_RING_BASE_ADDR_H (IRDA_BASE + 0x04) -#define IR_RING_BASE_ADDR_L (IRDA_BASE + 0x08) -#define IR_RING_SIZE (IRDA_BASE + 0x0C) -#define IR_RING_PROMPT (IRDA_BASE + 0x10) -#define IR_RING_ADDR_CMPR (IRDA_BASE + 0x14) -#define IR_INT_CLEAR (IRDA_BASE + 0x18) -#define IR_CONFIG_1 (IRDA_BASE + 0x20) -# define IR_RX_INVERT_LED (1 << 0) -# define IR_TX_INVERT_LED (1 << 1) -# define IR_ST (1 << 2) -# define IR_SF (1 << 3) -# define IR_SIR (1 << 4) -# define IR_MIR (1 << 5) -# define IR_FIR (1 << 6) -# define IR_16CRC (1 << 7) -# define IR_TD (1 << 8) -# define IR_RX_ALL (1 << 9) -# define IR_DMA_ENABLE (1 << 10) -# define IR_RX_ENABLE (1 << 11) -# define IR_TX_ENABLE (1 << 12) -# define IR_LOOPBACK (1 << 14) -# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ - IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) -#define IR_SIR_FLAGS (IRDA_BASE + 0x24) -#define IR_ENABLE (IRDA_BASE + 0x28) -# define IR_RX_STATUS (1 << 9) -# define IR_TX_STATUS (1 << 10) -#define IR_READ_PHY_CONFIG (IRDA_BASE + 0x2C) -#define IR_WRITE_PHY_CONFIG (IRDA_BASE + 0x30) -#define IR_MAX_PKT_LEN (IRDA_BASE + 0x34) -#define IR_RX_BYTE_CNT (IRDA_BASE + 0x38) -#define IR_CONFIG_2 (IRDA_BASE + 0x3C) -# define IR_MODE_INV (1 << 0) -# define IR_ONE_PIN (1 << 1) -#define IR_INTERFACE_CONFIG (IRDA_BASE + 0x40) + +/* + * The IrDA peripheral has an IRFIRSEL pin, but on the DB/PB boards it's not + * used to select FIR/SIR mode on the transceiver but as a GPIO. Instead a + * CPLD has to be told about the mode. + */ +#define AU1000_IRDA_PHY_MODE_OFF 0 +#define AU1000_IRDA_PHY_MODE_SIR 1 +#define AU1000_IRDA_PHY_MODE_FIR 2 + +struct au1k_irda_platform_data { + void(*set_phy_mode)(int mode); +}; + /* GPIO */ #define SYS_PINFUNC 0xB190002C diff --git a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h index 94000a3b6f0b..e221659f1bca 100644 --- a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h +++ b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h @@ -130,8 +130,10 @@ struct au1xmmc_platform_data { #define SD_CONFIG2_DF (0x00000008) #define SD_CONFIG2_DC (0x00000010) #define SD_CONFIG2_xx2 (0x000000e0) +#define SD_CONFIG2_BB (0x00000080) #define SD_CONFIG2_WB (0x00000100) #define SD_CONFIG2_RW (0x00000200) +#define SD_CONFIG2_DP (0x00000400) /* diff --git a/arch/mips/include/asm/mach-au1x00/au1200fb.h b/arch/mips/include/asm/mach-au1x00/au1200fb.h new file mode 100644 index 000000000000..b3c87cc64bb9 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1200fb.h @@ -0,0 +1,14 @@ +/* + * platform data for au1200fb driver. + */ + +#ifndef _AU1200FB_PLAT_H_ +#define _AU1200FB_PLAT_H_ + +struct au1200fb_platdata { + int (*panel_index)(void); + int (*panel_init)(void); + int (*panel_shutdown)(void); +}; + +#endif diff --git a/arch/mips/include/asm/mach-au1x00/au1550nd.h b/arch/mips/include/asm/mach-au1x00/au1550nd.h new file mode 100644 index 000000000000..ad4c0a03afef --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1550nd.h @@ -0,0 +1,16 @@ +/* + * platform data for the Au1550 NAND driver + */ + +#ifndef _AU1550ND_H_ +#define _AU1550ND_H_ + +#include <linux/mtd/partitions.h> + +struct au1550nd_platdata { + struct mtd_partition *parts; + int num_parts; + int devwidth; /* 0 = 8bit device, 1 = 16bit device */ +}; + +#endif diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h index 323ce2d145f2..217810e18361 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -183,6 +183,37 @@ typedef volatile struct au1xxx_ddma_desc { #define AU1200_DSCR_CMD0_PSC1_SYNC 25 #define AU1200_DSCR_CMD0_CIM_SYNC 26 +#define AU1300_DSCR_CMD0_UART0_TX 0 +#define AU1300_DSCR_CMD0_UART0_RX 1 +#define AU1300_DSCR_CMD0_UART1_TX 2 +#define AU1300_DSCR_CMD0_UART1_RX 3 +#define AU1300_DSCR_CMD0_UART2_TX 4 +#define AU1300_DSCR_CMD0_UART2_RX 5 +#define AU1300_DSCR_CMD0_UART3_TX 6 +#define AU1300_DSCR_CMD0_UART3_RX 7 +#define AU1300_DSCR_CMD0_SDMS_TX0 8 +#define AU1300_DSCR_CMD0_SDMS_RX0 9 +#define AU1300_DSCR_CMD0_SDMS_TX1 10 +#define AU1300_DSCR_CMD0_SDMS_RX1 11 +#define AU1300_DSCR_CMD0_AES_TX 12 +#define AU1300_DSCR_CMD0_AES_RX 13 +#define AU1300_DSCR_CMD0_PSC0_TX 14 +#define AU1300_DSCR_CMD0_PSC0_RX 15 +#define AU1300_DSCR_CMD0_PSC1_TX 16 +#define AU1300_DSCR_CMD0_PSC1_RX 17 +#define AU1300_DSCR_CMD0_PSC2_TX 18 +#define AU1300_DSCR_CMD0_PSC2_RX 19 +#define AU1300_DSCR_CMD0_PSC3_TX 20 +#define AU1300_DSCR_CMD0_PSC3_RX 21 +#define AU1300_DSCR_CMD0_LCD 22 +#define AU1300_DSCR_CMD0_NAND_FLASH 23 +#define AU1300_DSCR_CMD0_SDMS_TX2 24 +#define AU1300_DSCR_CMD0_SDMS_RX2 25 +#define AU1300_DSCR_CMD0_CIM_SYNC 26 +#define AU1300_DSCR_CMD0_UDMA 27 +#define AU1300_DSCR_CMD0_DMA_REQ0 28 +#define AU1300_DSCR_CMD0_DMA_REQ1 29 + #define DSCR_CMD0_THROTTLE 30 #define DSCR_CMD0_ALWAYS 31 #define DSCR_NDEV_IDS 32 diff --git a/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h index d5df0cab9b87..3f741af37d47 100644 --- a/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h @@ -13,12 +13,14 @@ #define cpu_has_4k_cache 1 #define cpu_has_tx39_cache 0 #define cpu_has_fpu 0 +#define cpu_has_32fpr 0 #define cpu_has_counter 1 #define cpu_has_watch 1 #define cpu_has_divec 1 #define cpu_has_vce 0 #define cpu_has_cache_cdex_p 0 #define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 #define cpu_has_mcheck 1 #define cpu_has_ejtag 1 #define cpu_has_llsc 1 @@ -29,6 +31,7 @@ #define cpu_has_vtag_icache 0 #define cpu_has_dc_aliases 0 #define cpu_has_ic_fills_f_dc 1 +#define cpu_has_pindexed_dcache 0 #define cpu_has_mips32r1 1 #define cpu_has_mips32r2 0 #define cpu_has_mips64r1 0 diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h new file mode 100644 index 000000000000..556e1be20bf6 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h @@ -0,0 +1,241 @@ +/* + * gpio-au1300.h -- GPIO control for Au1300 GPIC and compatibles. + * + * Copyright (c) 2009-2011 Manuel Lauss <manuel.lauss@googlemail.com> + */ + +#ifndef _GPIO_AU1300_H_ +#define _GPIO_AU1300_H_ + +#include <asm/addrspace.h> +#include <asm/io.h> +#include <asm/mach-au1x00/au1000.h> + +/* with the current GPIC design, up to 128 GPIOs are possible. + * The only implementation so far is in the Au1300, which has 75 externally + * available GPIOs. + */ +#define AU1300_GPIO_BASE 0 +#define AU1300_GPIO_NUM 75 +#define AU1300_GPIO_MAX (AU1300_GPIO_BASE + AU1300_GPIO_NUM - 1) + +#define AU1300_GPIC_ADDR \ + (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR) + +static inline int au1300_gpio_get_value(unsigned int gpio) +{ + void __iomem *roff = AU1300_GPIC_ADDR; + int bit; + + gpio -= AU1300_GPIO_BASE; + roff += GPIC_GPIO_BANKOFF(gpio); + bit = GPIC_GPIO_TO_BIT(gpio); + return __raw_readl(roff + AU1300_GPIC_PINVAL) & bit; +} + +static inline int au1300_gpio_direction_input(unsigned int gpio) +{ + void __iomem *roff = AU1300_GPIC_ADDR; + unsigned long bit; + + gpio -= AU1300_GPIO_BASE; + + roff += GPIC_GPIO_BANKOFF(gpio); + bit = GPIC_GPIO_TO_BIT(gpio); + __raw_writel(bit, roff + AU1300_GPIC_DEVCLR); + wmb(); + + return 0; +} + +static inline int au1300_gpio_set_value(unsigned int gpio, int v) +{ + void __iomem *roff = AU1300_GPIC_ADDR; + unsigned long bit; + + gpio -= AU1300_GPIO_BASE; + + roff += GPIC_GPIO_BANKOFF(gpio); + bit = GPIC_GPIO_TO_BIT(gpio); + __raw_writel(bit, roff + (v ? AU1300_GPIC_PINVAL + : AU1300_GPIC_PINVALCLR)); + wmb(); + + return 0; +} + +static inline int au1300_gpio_direction_output(unsigned int gpio, int v) +{ + /* hw switches to output automatically */ + return au1300_gpio_set_value(gpio, v); +} + +static inline int au1300_gpio_to_irq(unsigned int gpio) +{ + return AU1300_FIRST_INT + (gpio - AU1300_GPIO_BASE); +} + +static inline int au1300_irq_to_gpio(unsigned int irq) +{ + return (irq - AU1300_FIRST_INT) + AU1300_GPIO_BASE; +} + +static inline int au1300_gpio_is_valid(unsigned int gpio) +{ + int ret; + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1300: + ret = ((gpio >= AU1300_GPIO_BASE) && (gpio <= AU1300_GPIO_MAX)); + break; + default: + ret = 0; + } + return ret; +} + +static inline int au1300_gpio_cansleep(unsigned int gpio) +{ + return 0; +} + +/* hardware remembers gpio 0-63 levels on powerup */ +static inline int au1300_gpio_getinitlvl(unsigned int gpio) +{ + void __iomem *roff = AU1300_GPIC_ADDR; + unsigned long v; + + if (unlikely(gpio > 63)) + return 0; + else if (gpio > 31) { + gpio -= 32; + roff += 4; + } + + v = __raw_readl(roff + AU1300_GPIC_RSTVAL); + return (v >> gpio) & 1; +} + +/**********************************************************************/ + +/* Linux gpio framework integration. +* +* 4 use cases of Alchemy GPIOS: +*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y: +* Board must register gpiochips. +*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n: +* A gpiochip for the 75 GPIOs is registered. +* +*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y: +* the boards' gpio.h must provide the linux gpio wrapper functions, +* +*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n: +* inlinable gpio functions are provided which enable access to the +* Au1300 gpios only by using the numbers straight out of the data- +* sheets. + +* Cases 1 and 3 are intended for boards which want to provide their own +* GPIO namespace and -operations (i.e. for example you have 8 GPIOs +* which are in part provided by spare Au1300 GPIO pins and in part by +* an external FPGA but you still want them to be accssible in linux +* as gpio0-7. The board can of course use the alchemy_gpioX_* functions +* as required). +*/ + +#ifndef CONFIG_GPIOLIB + +#ifdef CONFIG_ALCHEMY_GPIOINT_AU1300 + +#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (4) */ + +static inline int gpio_direction_input(unsigned int gpio) +{ + return au1300_gpio_direction_input(gpio); +} + +static inline int gpio_direction_output(unsigned int gpio, int v) +{ + return au1300_gpio_direction_output(gpio, v); +} + +static inline int gpio_get_value(unsigned int gpio) +{ + return au1300_gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int v) +{ + au1300_gpio_set_value(gpio, v); +} + +static inline int gpio_get_value_cansleep(unsigned gpio) +{ + return gpio_get_value(gpio); +} + +static inline void gpio_set_value_cansleep(unsigned gpio, int value) +{ + gpio_set_value(gpio, value); +} + +static inline int gpio_is_valid(unsigned int gpio) +{ + return au1300_gpio_is_valid(gpio); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return au1300_gpio_cansleep(gpio); +} + +static inline int gpio_to_irq(unsigned int gpio) +{ + return au1300_gpio_to_irq(gpio); +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return au1300_irq_to_gpio(irq); +} + +static inline int gpio_request(unsigned int gpio, const char *label) +{ + return 0; +} + +static inline void gpio_free(unsigned int gpio) +{ +} + +static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) +{ + return -ENOSYS; +} + +static inline void gpio_unexport(unsigned gpio) +{ +} + +static inline int gpio_export(unsigned gpio, bool direction_may_change) +{ + return -ENOSYS; +} + +static inline int gpio_sysfs_set_active_low(unsigned gpio, int value) +{ + return -ENOSYS; +} + +static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) +{ + return -ENOSYS; +} + +#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */ + +#endif /* CONFIG_ALCHEMY_GPIOINT_AU1300 */ + +#endif /* CONFIG GPIOLIB */ + +#endif /* _GPIO_AU1300_H_ */ diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h index fcdc8c4809db..22e7ff17fc48 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio.h +++ b/arch/mips/include/asm/mach-au1x00/gpio.h @@ -12,6 +12,7 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/gpio-au1000.h> +#include <asm/mach-au1x00/gpio-au1300.h> /* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before * SYS_PININPUTEN is written to at least once. On Au1550/Au1200/Au1300 this @@ -58,6 +59,8 @@ static inline int __au_irq_to_gpio(unsigned int irq) switch (alchemy_get_cputype()) { case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200: return alchemy_irq_to_gpio(irq); + case ALCHEMY_CPU_AU1300: + return au1300_irq_to_gpio(irq); } return -EINVAL; } diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h index 96a2391ad85b..5b8d15bb5fe8 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h @@ -13,6 +13,7 @@ #define BCM6345_CPU_ID 0x6345 #define BCM6348_CPU_ID 0x6348 #define BCM6358_CPU_ID 0x6358 +#define BCM6368_CPU_ID 0x6368 void __init bcm63xx_cpu_init(void); u16 __bcm63xx_get_cpu_id(void); @@ -71,6 +72,19 @@ unsigned int bcm63xx_get_cpu_freq(void); # define BCMCPU_IS_6358() (0) #endif +#ifdef CONFIG_BCM63XX_CPU_6368 +# ifdef bcm63xx_get_cpu_id +# undef bcm63xx_get_cpu_id +# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() +# define BCMCPU_RUNTIME_DETECT +# else +# define bcm63xx_get_cpu_id() BCM6368_CPU_ID +# endif +# define BCMCPU_IS_6368() (bcm63xx_get_cpu_id() == BCM6368_CPU_ID) +#else +# define BCMCPU_IS_6368() (0) +#endif + #ifndef bcm63xx_get_cpu_id #error "No CPU support configured" #endif @@ -88,6 +102,7 @@ enum bcm63xx_regs_set { RSET_UART1, RSET_GPIO, RSET_SPI, + RSET_SPI2, RSET_UDC0, RSET_OHCI0, RSET_OHCI_PRIV, @@ -98,10 +113,23 @@ enum bcm63xx_regs_set { RSET_ENET0, RSET_ENET1, RSET_ENETDMA, + RSET_ENETDMAC, + RSET_ENETDMAS, + RSET_ENETSW, RSET_EHCI0, RSET_SDRAM, RSET_MEMC, RSET_DDR, + RSET_M2M, + RSET_ATM, + RSET_XTM, + RSET_XTMDMA, + RSET_XTMDMAC, + RSET_XTMDMAS, + RSET_PCM, + RSET_PCMDMA, + RSET_PCMDMAC, + RSET_PCMDMAS, }; #define RSET_DSL_LMEM_SIZE (64 * 1024 * 4) @@ -109,11 +137,18 @@ enum bcm63xx_regs_set { #define RSET_WDT_SIZE 12 #define RSET_ENET_SIZE 2048 #define RSET_ENETDMA_SIZE 2048 +#define RSET_ENETSW_SIZE 65536 #define RSET_UART_SIZE 24 #define RSET_UDC_SIZE 256 #define RSET_OHCI_SIZE 256 #define RSET_EHCI_SIZE 256 #define RSET_PCMCIA_SIZE 12 +#define RSET_M2M_SIZE 256 +#define RSET_ATM_SIZE 4096 +#define RSET_XTM_SIZE 10240 +#define RSET_XTMDMA_SIZE 256 +#define RSET_XTMDMAC_SIZE(chans) (16 * (chans)) +#define RSET_XTMDMAS_SIZE(chans) (16 * (chans)) /* * 6338 register sets base address @@ -127,6 +162,7 @@ enum bcm63xx_regs_set { #define BCM_6338_UART1_BASE (0xdeadbeef) #define BCM_6338_GPIO_BASE (0xfffe0400) #define BCM_6338_SPI_BASE (0xfffe0c00) +#define BCM_6338_SPI2_BASE (0xdeadbeef) #define BCM_6338_UDC0_BASE (0xdeadbeef) #define BCM_6338_USBDMA_BASE (0xfffe2400) #define BCM_6338_OHCI0_BASE (0xdeadbeef) @@ -136,15 +172,27 @@ enum bcm63xx_regs_set { #define BCM_6338_PCMCIA_BASE (0xdeadbeef) #define BCM_6338_SDRAM_REGS_BASE (0xfffe3100) #define BCM_6338_DSL_BASE (0xfffe1000) -#define BCM_6338_SAR_BASE (0xfffe2000) #define BCM_6338_UBUS_BASE (0xdeadbeef) #define BCM_6338_ENET0_BASE (0xfffe2800) #define BCM_6338_ENET1_BASE (0xdeadbeef) #define BCM_6338_ENETDMA_BASE (0xfffe2400) +#define BCM_6338_ENETDMAC_BASE (0xfffe2500) +#define BCM_6338_ENETDMAS_BASE (0xfffe2600) +#define BCM_6338_ENETSW_BASE (0xdeadbeef) #define BCM_6338_EHCI0_BASE (0xdeadbeef) #define BCM_6338_SDRAM_BASE (0xfffe3100) #define BCM_6338_MEMC_BASE (0xdeadbeef) #define BCM_6338_DDR_BASE (0xdeadbeef) +#define BCM_6338_M2M_BASE (0xdeadbeef) +#define BCM_6338_ATM_BASE (0xfffe2000) +#define BCM_6338_XTM_BASE (0xdeadbeef) +#define BCM_6338_XTMDMA_BASE (0xdeadbeef) +#define BCM_6338_XTMDMAC_BASE (0xdeadbeef) +#define BCM_6338_XTMDMAS_BASE (0xdeadbeef) +#define BCM_6338_PCM_BASE (0xdeadbeef) +#define BCM_6338_PCMDMA_BASE (0xdeadbeef) +#define BCM_6338_PCMDMAC_BASE (0xdeadbeef) +#define BCM_6338_PCMDMAS_BASE (0xdeadbeef) /* * 6345 register sets base address @@ -158,24 +206,37 @@ enum bcm63xx_regs_set { #define BCM_6345_UART1_BASE (0xdeadbeef) #define BCM_6345_GPIO_BASE (0xfffe0400) #define BCM_6345_SPI_BASE (0xdeadbeef) +#define BCM_6345_SPI2_BASE (0xdeadbeef) #define BCM_6345_UDC0_BASE (0xdeadbeef) #define BCM_6345_USBDMA_BASE (0xfffe2800) #define BCM_6345_ENET0_BASE (0xfffe1800) #define BCM_6345_ENETDMA_BASE (0xfffe2800) +#define BCM_6345_ENETDMAC_BASE (0xfffe2900) +#define BCM_6345_ENETDMAS_BASE (0xfffe2a00) +#define BCM_6345_ENETSW_BASE (0xdeadbeef) #define BCM_6345_PCMCIA_BASE (0xfffe2028) -#define BCM_6345_MPI_BASE (0xdeadbeef) +#define BCM_6345_MPI_BASE (0xfffe2000) #define BCM_6345_OHCI0_BASE (0xfffe2100) #define BCM_6345_OHCI_PRIV_BASE (0xfffe2200) #define BCM_6345_USBH_PRIV_BASE (0xdeadbeef) #define BCM_6345_SDRAM_REGS_BASE (0xfffe2300) #define BCM_6345_DSL_BASE (0xdeadbeef) -#define BCM_6345_SAR_BASE (0xdeadbeef) #define BCM_6345_UBUS_BASE (0xdeadbeef) #define BCM_6345_ENET1_BASE (0xdeadbeef) #define BCM_6345_EHCI0_BASE (0xdeadbeef) #define BCM_6345_SDRAM_BASE (0xfffe2300) #define BCM_6345_MEMC_BASE (0xdeadbeef) #define BCM_6345_DDR_BASE (0xdeadbeef) +#define BCM_6345_M2M_BASE (0xdeadbeef) +#define BCM_6345_ATM_BASE (0xfffe4000) +#define BCM_6345_XTM_BASE (0xdeadbeef) +#define BCM_6345_XTMDMA_BASE (0xdeadbeef) +#define BCM_6345_XTMDMAC_BASE (0xdeadbeef) +#define BCM_6345_XTMDMAS_BASE (0xdeadbeef) +#define BCM_6345_PCM_BASE (0xdeadbeef) +#define BCM_6345_PCMDMA_BASE (0xdeadbeef) +#define BCM_6345_PCMDMAC_BASE (0xdeadbeef) +#define BCM_6345_PCMDMAS_BASE (0xdeadbeef) /* * 6348 register sets base address @@ -188,6 +249,7 @@ enum bcm63xx_regs_set { #define BCM_6348_UART1_BASE (0xdeadbeef) #define BCM_6348_GPIO_BASE (0xfffe0400) #define BCM_6348_SPI_BASE (0xfffe0c00) +#define BCM_6348_SPI2_BASE (0xdeadbeef) #define BCM_6348_UDC0_BASE (0xfffe1000) #define BCM_6348_OHCI0_BASE (0xfffe1b00) #define BCM_6348_OHCI_PRIV_BASE (0xfffe1c00) @@ -195,14 +257,27 @@ enum bcm63xx_regs_set { #define BCM_6348_MPI_BASE (0xfffe2000) #define BCM_6348_PCMCIA_BASE (0xfffe2054) #define BCM_6348_SDRAM_REGS_BASE (0xfffe2300) +#define BCM_6348_M2M_BASE (0xfffe2800) #define BCM_6348_DSL_BASE (0xfffe3000) #define BCM_6348_ENET0_BASE (0xfffe6000) #define BCM_6348_ENET1_BASE (0xfffe6800) #define BCM_6348_ENETDMA_BASE (0xfffe7000) +#define BCM_6348_ENETDMAC_BASE (0xfffe7100) +#define BCM_6348_ENETDMAS_BASE (0xfffe7200) +#define BCM_6348_ENETSW_BASE (0xdeadbeef) #define BCM_6348_EHCI0_BASE (0xdeadbeef) #define BCM_6348_SDRAM_BASE (0xfffe2300) #define BCM_6348_MEMC_BASE (0xdeadbeef) #define BCM_6348_DDR_BASE (0xdeadbeef) +#define BCM_6348_ATM_BASE (0xfffe4000) +#define BCM_6348_XTM_BASE (0xdeadbeef) +#define BCM_6348_XTMDMA_BASE (0xdeadbeef) +#define BCM_6348_XTMDMAC_BASE (0xdeadbeef) +#define BCM_6348_XTMDMAS_BASE (0xdeadbeef) +#define BCM_6348_PCM_BASE (0xdeadbeef) +#define BCM_6348_PCMDMA_BASE (0xdeadbeef) +#define BCM_6348_PCMDMAC_BASE (0xdeadbeef) +#define BCM_6348_PCMDMAS_BASE (0xdeadbeef) /* * 6358 register sets base address @@ -215,6 +290,7 @@ enum bcm63xx_regs_set { #define BCM_6358_UART1_BASE (0xfffe0120) #define BCM_6358_GPIO_BASE (0xfffe0080) #define BCM_6358_SPI_BASE (0xdeadbeef) +#define BCM_6358_SPI2_BASE (0xfffe0800) #define BCM_6358_UDC0_BASE (0xfffe0800) #define BCM_6358_OHCI0_BASE (0xfffe1400) #define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef) @@ -222,214 +298,175 @@ enum bcm63xx_regs_set { #define BCM_6358_MPI_BASE (0xfffe1000) #define BCM_6358_PCMCIA_BASE (0xfffe1054) #define BCM_6358_SDRAM_REGS_BASE (0xfffe2300) +#define BCM_6358_M2M_BASE (0xdeadbeef) #define BCM_6358_DSL_BASE (0xfffe3000) #define BCM_6358_ENET0_BASE (0xfffe4000) #define BCM_6358_ENET1_BASE (0xfffe4800) #define BCM_6358_ENETDMA_BASE (0xfffe5000) +#define BCM_6358_ENETDMAC_BASE (0xfffe5100) +#define BCM_6358_ENETDMAS_BASE (0xfffe5200) +#define BCM_6358_ENETSW_BASE (0xdeadbeef) #define BCM_6358_EHCI0_BASE (0xfffe1300) #define BCM_6358_SDRAM_BASE (0xdeadbeef) #define BCM_6358_MEMC_BASE (0xfffe1200) #define BCM_6358_DDR_BASE (0xfffe12a0) +#define BCM_6358_ATM_BASE (0xfffe2000) +#define BCM_6358_XTM_BASE (0xdeadbeef) +#define BCM_6358_XTMDMA_BASE (0xdeadbeef) +#define BCM_6358_XTMDMAC_BASE (0xdeadbeef) +#define BCM_6358_XTMDMAS_BASE (0xdeadbeef) +#define BCM_6358_PCM_BASE (0xfffe1600) +#define BCM_6358_PCMDMA_BASE (0xfffe1800) +#define BCM_6358_PCMDMAC_BASE (0xfffe1900) +#define BCM_6358_PCMDMAS_BASE (0xfffe1a00) + + +/* + * 6368 register sets base address + */ +#define BCM_6368_DSL_LMEM_BASE (0xdeadbeef) +#define BCM_6368_PERF_BASE (0xb0000000) +#define BCM_6368_TIMER_BASE (0xb0000040) +#define BCM_6368_WDT_BASE (0xb000005c) +#define BCM_6368_UART0_BASE (0xb0000100) +#define BCM_6368_UART1_BASE (0xb0000120) +#define BCM_6368_GPIO_BASE (0xb0000080) +#define BCM_6368_SPI_BASE (0xdeadbeef) +#define BCM_6368_SPI2_BASE (0xb0000800) +#define BCM_6368_UDC0_BASE (0xdeadbeef) +#define BCM_6368_OHCI0_BASE (0xb0001600) +#define BCM_6368_OHCI_PRIV_BASE (0xdeadbeef) +#define BCM_6368_USBH_PRIV_BASE (0xb0001700) +#define BCM_6368_MPI_BASE (0xb0001000) +#define BCM_6368_PCMCIA_BASE (0xb0001054) +#define BCM_6368_SDRAM_REGS_BASE (0xdeadbeef) +#define BCM_6368_M2M_BASE (0xdeadbeef) +#define BCM_6368_DSL_BASE (0xdeadbeef) +#define BCM_6368_ENET0_BASE (0xdeadbeef) +#define BCM_6368_ENET1_BASE (0xdeadbeef) +#define BCM_6368_ENETDMA_BASE (0xb0006800) +#define BCM_6368_ENETDMAC_BASE (0xb0006a00) +#define BCM_6368_ENETDMAS_BASE (0xb0006c00) +#define BCM_6368_ENETSW_BASE (0xb0f00000) +#define BCM_6368_EHCI0_BASE (0xb0001500) +#define BCM_6368_SDRAM_BASE (0xdeadbeef) +#define BCM_6368_MEMC_BASE (0xb0001200) +#define BCM_6368_DDR_BASE (0xb0001280) +#define BCM_6368_ATM_BASE (0xdeadbeef) +#define BCM_6368_XTM_BASE (0xb0001800) +#define BCM_6368_XTMDMA_BASE (0xb0005000) +#define BCM_6368_XTMDMAC_BASE (0xb0005200) +#define BCM_6368_XTMDMAS_BASE (0xb0005400) +#define BCM_6368_PCM_BASE (0xb0004000) +#define BCM_6368_PCMDMA_BASE (0xb0005800) +#define BCM_6368_PCMDMAC_BASE (0xb0005a00) +#define BCM_6368_PCMDMAS_BASE (0xb0005c00) extern const unsigned long *bcm63xx_regs_base; +#define __GEN_RSET_BASE(__cpu, __rset) \ + case RSET_## __rset : \ + return BCM_## __cpu ##_## __rset ##_BASE; + +#define __GEN_RSET(__cpu) \ + switch (set) { \ + __GEN_RSET_BASE(__cpu, DSL_LMEM) \ + __GEN_RSET_BASE(__cpu, PERF) \ + __GEN_RSET_BASE(__cpu, TIMER) \ + __GEN_RSET_BASE(__cpu, WDT) \ + __GEN_RSET_BASE(__cpu, UART0) \ + __GEN_RSET_BASE(__cpu, UART1) \ + __GEN_RSET_BASE(__cpu, GPIO) \ + __GEN_RSET_BASE(__cpu, SPI) \ + __GEN_RSET_BASE(__cpu, SPI2) \ + __GEN_RSET_BASE(__cpu, UDC0) \ + __GEN_RSET_BASE(__cpu, OHCI0) \ + __GEN_RSET_BASE(__cpu, OHCI_PRIV) \ + __GEN_RSET_BASE(__cpu, USBH_PRIV) \ + __GEN_RSET_BASE(__cpu, MPI) \ + __GEN_RSET_BASE(__cpu, PCMCIA) \ + __GEN_RSET_BASE(__cpu, DSL) \ + __GEN_RSET_BASE(__cpu, ENET0) \ + __GEN_RSET_BASE(__cpu, ENET1) \ + __GEN_RSET_BASE(__cpu, ENETDMA) \ + __GEN_RSET_BASE(__cpu, ENETDMAC) \ + __GEN_RSET_BASE(__cpu, ENETDMAS) \ + __GEN_RSET_BASE(__cpu, ENETSW) \ + __GEN_RSET_BASE(__cpu, EHCI0) \ + __GEN_RSET_BASE(__cpu, SDRAM) \ + __GEN_RSET_BASE(__cpu, MEMC) \ + __GEN_RSET_BASE(__cpu, DDR) \ + __GEN_RSET_BASE(__cpu, M2M) \ + __GEN_RSET_BASE(__cpu, ATM) \ + __GEN_RSET_BASE(__cpu, XTM) \ + __GEN_RSET_BASE(__cpu, XTMDMA) \ + __GEN_RSET_BASE(__cpu, XTMDMAC) \ + __GEN_RSET_BASE(__cpu, XTMDMAS) \ + __GEN_RSET_BASE(__cpu, PCM) \ + __GEN_RSET_BASE(__cpu, PCMDMA) \ + __GEN_RSET_BASE(__cpu, PCMDMAC) \ + __GEN_RSET_BASE(__cpu, PCMDMAS) \ + } + +#define __GEN_CPU_REGS_TABLE(__cpu) \ + [RSET_DSL_LMEM] = BCM_## __cpu ##_DSL_LMEM_BASE, \ + [RSET_PERF] = BCM_## __cpu ##_PERF_BASE, \ + [RSET_TIMER] = BCM_## __cpu ##_TIMER_BASE, \ + [RSET_WDT] = BCM_## __cpu ##_WDT_BASE, \ + [RSET_UART0] = BCM_## __cpu ##_UART0_BASE, \ + [RSET_UART1] = BCM_## __cpu ##_UART1_BASE, \ + [RSET_GPIO] = BCM_## __cpu ##_GPIO_BASE, \ + [RSET_SPI] = BCM_## __cpu ##_SPI_BASE, \ + [RSET_SPI2] = BCM_## __cpu ##_SPI2_BASE, \ + [RSET_UDC0] = BCM_## __cpu ##_UDC0_BASE, \ + [RSET_OHCI0] = BCM_## __cpu ##_OHCI0_BASE, \ + [RSET_OHCI_PRIV] = BCM_## __cpu ##_OHCI_PRIV_BASE, \ + [RSET_USBH_PRIV] = BCM_## __cpu ##_USBH_PRIV_BASE, \ + [RSET_MPI] = BCM_## __cpu ##_MPI_BASE, \ + [RSET_PCMCIA] = BCM_## __cpu ##_PCMCIA_BASE, \ + [RSET_DSL] = BCM_## __cpu ##_DSL_BASE, \ + [RSET_ENET0] = BCM_## __cpu ##_ENET0_BASE, \ + [RSET_ENET1] = BCM_## __cpu ##_ENET1_BASE, \ + [RSET_ENETDMA] = BCM_## __cpu ##_ENETDMA_BASE, \ + [RSET_ENETDMAC] = BCM_## __cpu ##_ENETDMAC_BASE, \ + [RSET_ENETDMAS] = BCM_## __cpu ##_ENETDMAS_BASE, \ + [RSET_ENETSW] = BCM_## __cpu ##_ENETSW_BASE, \ + [RSET_EHCI0] = BCM_## __cpu ##_EHCI0_BASE, \ + [RSET_SDRAM] = BCM_## __cpu ##_SDRAM_BASE, \ + [RSET_MEMC] = BCM_## __cpu ##_MEMC_BASE, \ + [RSET_DDR] = BCM_## __cpu ##_DDR_BASE, \ + [RSET_M2M] = BCM_## __cpu ##_M2M_BASE, \ + [RSET_ATM] = BCM_## __cpu ##_ATM_BASE, \ + [RSET_XTM] = BCM_## __cpu ##_XTM_BASE, \ + [RSET_XTMDMA] = BCM_## __cpu ##_XTMDMA_BASE, \ + [RSET_XTMDMAC] = BCM_## __cpu ##_XTMDMAC_BASE, \ + [RSET_XTMDMAS] = BCM_## __cpu ##_XTMDMAS_BASE, \ + [RSET_PCM] = BCM_## __cpu ##_PCM_BASE, \ + [RSET_PCMDMA] = BCM_## __cpu ##_PCMDMA_BASE, \ + [RSET_PCMDMAC] = BCM_## __cpu ##_PCMDMAC_BASE, \ + [RSET_PCMDMAS] = BCM_## __cpu ##_PCMDMAS_BASE, \ + + static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set) { #ifdef BCMCPU_RUNTIME_DETECT return bcm63xx_regs_base[set]; #else #ifdef CONFIG_BCM63XX_CPU_6338 - switch (set) { - case RSET_DSL_LMEM: - return BCM_6338_DSL_LMEM_BASE; - case RSET_PERF: - return BCM_6338_PERF_BASE; - case RSET_TIMER: - return BCM_6338_TIMER_BASE; - case RSET_WDT: - return BCM_6338_WDT_BASE; - case RSET_UART0: - return BCM_6338_UART0_BASE; - case RSET_UART1: - return BCM_6338_UART1_BASE; - case RSET_GPIO: - return BCM_6338_GPIO_BASE; - case RSET_SPI: - return BCM_6338_SPI_BASE; - case RSET_UDC0: - return BCM_6338_UDC0_BASE; - case RSET_OHCI0: - return BCM_6338_OHCI0_BASE; - case RSET_OHCI_PRIV: - return BCM_6338_OHCI_PRIV_BASE; - case RSET_USBH_PRIV: - return BCM_6338_USBH_PRIV_BASE; - case RSET_MPI: - return BCM_6338_MPI_BASE; - case RSET_PCMCIA: - return BCM_6338_PCMCIA_BASE; - case RSET_DSL: - return BCM_6338_DSL_BASE; - case RSET_ENET0: - return BCM_6338_ENET0_BASE; - case RSET_ENET1: - return BCM_6338_ENET1_BASE; - case RSET_ENETDMA: - return BCM_6338_ENETDMA_BASE; - case RSET_EHCI0: - return BCM_6338_EHCI0_BASE; - case RSET_SDRAM: - return BCM_6338_SDRAM_BASE; - case RSET_MEMC: - return BCM_6338_MEMC_BASE; - case RSET_DDR: - return BCM_6338_DDR_BASE; - } + __GEN_RSET(6338) #endif #ifdef CONFIG_BCM63XX_CPU_6345 - switch (set) { - case RSET_DSL_LMEM: - return BCM_6345_DSL_LMEM_BASE; - case RSET_PERF: - return BCM_6345_PERF_BASE; - case RSET_TIMER: - return BCM_6345_TIMER_BASE; - case RSET_WDT: - return BCM_6345_WDT_BASE; - case RSET_UART0: - return BCM_6345_UART0_BASE; - case RSET_UART1: - return BCM_6345_UART1_BASE; - case RSET_GPIO: - return BCM_6345_GPIO_BASE; - case RSET_SPI: - return BCM_6345_SPI_BASE; - case RSET_UDC0: - return BCM_6345_UDC0_BASE; - case RSET_OHCI0: - return BCM_6345_OHCI0_BASE; - case RSET_OHCI_PRIV: - return BCM_6345_OHCI_PRIV_BASE; - case RSET_USBH_PRIV: - return BCM_6345_USBH_PRIV_BASE; - case RSET_MPI: - return BCM_6345_MPI_BASE; - case RSET_PCMCIA: - return BCM_6345_PCMCIA_BASE; - case RSET_DSL: - return BCM_6345_DSL_BASE; - case RSET_ENET0: - return BCM_6345_ENET0_BASE; - case RSET_ENET1: - return BCM_6345_ENET1_BASE; - case RSET_ENETDMA: - return BCM_6345_ENETDMA_BASE; - case RSET_EHCI0: - return BCM_6345_EHCI0_BASE; - case RSET_SDRAM: - return BCM_6345_SDRAM_BASE; - case RSET_MEMC: - return BCM_6345_MEMC_BASE; - case RSET_DDR: - return BCM_6345_DDR_BASE; - } + __GEN_RSET(6345) #endif #ifdef CONFIG_BCM63XX_CPU_6348 - switch (set) { - case RSET_DSL_LMEM: - return BCM_6348_DSL_LMEM_BASE; - case RSET_PERF: - return BCM_6348_PERF_BASE; - case RSET_TIMER: - return BCM_6348_TIMER_BASE; - case RSET_WDT: - return BCM_6348_WDT_BASE; - case RSET_UART0: - return BCM_6348_UART0_BASE; - case RSET_UART1: - return BCM_6348_UART1_BASE; - case RSET_GPIO: - return BCM_6348_GPIO_BASE; - case RSET_SPI: - return BCM_6348_SPI_BASE; - case RSET_UDC0: - return BCM_6348_UDC0_BASE; - case RSET_OHCI0: - return BCM_6348_OHCI0_BASE; - case RSET_OHCI_PRIV: - return BCM_6348_OHCI_PRIV_BASE; - case RSET_USBH_PRIV: - return BCM_6348_USBH_PRIV_BASE; - case RSET_MPI: - return BCM_6348_MPI_BASE; - case RSET_PCMCIA: - return BCM_6348_PCMCIA_BASE; - case RSET_DSL: - return BCM_6348_DSL_BASE; - case RSET_ENET0: - return BCM_6348_ENET0_BASE; - case RSET_ENET1: - return BCM_6348_ENET1_BASE; - case RSET_ENETDMA: - return BCM_6348_ENETDMA_BASE; - case RSET_EHCI0: - return BCM_6348_EHCI0_BASE; - case RSET_SDRAM: - return BCM_6348_SDRAM_BASE; - case RSET_MEMC: - return BCM_6348_MEMC_BASE; - case RSET_DDR: - return BCM_6348_DDR_BASE; - } + __GEN_RSET(6348) #endif #ifdef CONFIG_BCM63XX_CPU_6358 - switch (set) { - case RSET_DSL_LMEM: - return BCM_6358_DSL_LMEM_BASE; - case RSET_PERF: - return BCM_6358_PERF_BASE; - case RSET_TIMER: - return BCM_6358_TIMER_BASE; - case RSET_WDT: - return BCM_6358_WDT_BASE; - case RSET_UART0: - return BCM_6358_UART0_BASE; - case RSET_UART1: - return BCM_6358_UART1_BASE; - case RSET_GPIO: - return BCM_6358_GPIO_BASE; - case RSET_SPI: - return BCM_6358_SPI_BASE; - case RSET_UDC0: - return BCM_6358_UDC0_BASE; - case RSET_OHCI0: - return BCM_6358_OHCI0_BASE; - case RSET_OHCI_PRIV: - return BCM_6358_OHCI_PRIV_BASE; - case RSET_USBH_PRIV: - return BCM_6358_USBH_PRIV_BASE; - case RSET_MPI: - return BCM_6358_MPI_BASE; - case RSET_PCMCIA: - return BCM_6358_PCMCIA_BASE; - case RSET_ENET0: - return BCM_6358_ENET0_BASE; - case RSET_ENET1: - return BCM_6358_ENET1_BASE; - case RSET_ENETDMA: - return BCM_6358_ENETDMA_BASE; - case RSET_DSL: - return BCM_6358_DSL_BASE; - case RSET_EHCI0: - return BCM_6358_EHCI0_BASE; - case RSET_SDRAM: - return BCM_6358_SDRAM_BASE; - case RSET_MEMC: - return BCM_6358_MEMC_BASE; - case RSET_DDR: - return BCM_6358_DDR_BASE; - } + __GEN_RSET(6358) +#endif +#ifdef CONFIG_BCM63XX_CPU_6368 + __GEN_RSET(6368) #endif #endif /* unreached */ @@ -449,75 +486,114 @@ enum bcm63xx_irq { IRQ_ENET_PHY, IRQ_OHCI0, IRQ_EHCI0, - IRQ_PCMCIA0, IRQ_ENET0_RXDMA, IRQ_ENET0_TXDMA, IRQ_ENET1_RXDMA, IRQ_ENET1_TXDMA, IRQ_PCI, IRQ_PCMCIA, + IRQ_ATM, + IRQ_ENETSW_RXDMA0, + IRQ_ENETSW_RXDMA1, + IRQ_ENETSW_RXDMA2, + IRQ_ENETSW_RXDMA3, + IRQ_ENETSW_TXDMA0, + IRQ_ENETSW_TXDMA1, + IRQ_ENETSW_TXDMA2, + IRQ_ENETSW_TXDMA3, + IRQ_XTM, + IRQ_XTM_DMA0, }; /* * 6338 irqs */ #define BCM_6338_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) -#define BCM_6338_SPI_IRQ (IRQ_INTERNAL_BASE + 1) #define BCM_6338_UART0_IRQ (IRQ_INTERNAL_BASE + 2) -#define BCM_6338_DG_IRQ (IRQ_INTERNAL_BASE + 4) +#define BCM_6338_UART1_IRQ 0 #define BCM_6338_DSL_IRQ (IRQ_INTERNAL_BASE + 5) -#define BCM_6338_ATM_IRQ (IRQ_INTERNAL_BASE + 6) -#define BCM_6338_UDC0_IRQ (IRQ_INTERNAL_BASE + 7) #define BCM_6338_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6338_ENET1_IRQ 0 #define BCM_6338_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) -#define BCM_6338_SDRAM_IRQ (IRQ_INTERNAL_BASE + 10) -#define BCM_6338_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 11) -#define BCM_6338_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 12) -#define BCM_6338_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13) -#define BCM_6338_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 14) +#define BCM_6338_OHCI0_IRQ 0 +#define BCM_6338_EHCI0_IRQ 0 #define BCM_6338_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15) #define BCM_6338_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 16) -#define BCM_6338_SDIO_IRQ (IRQ_INTERNAL_BASE + 17) +#define BCM_6338_ENET1_RXDMA_IRQ 0 +#define BCM_6338_ENET1_TXDMA_IRQ 0 +#define BCM_6338_PCI_IRQ 0 +#define BCM_6338_PCMCIA_IRQ 0 +#define BCM_6338_ATM_IRQ 0 +#define BCM_6338_ENETSW_RXDMA0_IRQ 0 +#define BCM_6338_ENETSW_RXDMA1_IRQ 0 +#define BCM_6338_ENETSW_RXDMA2_IRQ 0 +#define BCM_6338_ENETSW_RXDMA3_IRQ 0 +#define BCM_6338_ENETSW_TXDMA0_IRQ 0 +#define BCM_6338_ENETSW_TXDMA1_IRQ 0 +#define BCM_6338_ENETSW_TXDMA2_IRQ 0 +#define BCM_6338_ENETSW_TXDMA3_IRQ 0 +#define BCM_6338_XTM_IRQ 0 +#define BCM_6338_XTM_DMA0_IRQ 0 /* * 6345 irqs */ #define BCM_6345_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) #define BCM_6345_UART0_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6345_UART1_IRQ 0 #define BCM_6345_DSL_IRQ (IRQ_INTERNAL_BASE + 3) -#define BCM_6345_ATM_IRQ (IRQ_INTERNAL_BASE + 4) -#define BCM_6345_USB_IRQ (IRQ_INTERNAL_BASE + 5) #define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6345_ENET1_IRQ 0 #define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12) +#define BCM_6345_OHCI0_IRQ 0 +#define BCM_6345_EHCI0_IRQ 0 #define BCM_6345_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 1) #define BCM_6345_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 2) -#define BCM_6345_EBI_RX_IRQ (IRQ_INTERNAL_BASE + 13 + 5) -#define BCM_6345_EBI_TX_IRQ (IRQ_INTERNAL_BASE + 13 + 6) -#define BCM_6345_RESERVED_RX_IRQ (IRQ_INTERNAL_BASE + 13 + 9) -#define BCM_6345_RESERVED_TX_IRQ (IRQ_INTERNAL_BASE + 13 + 10) -#define BCM_6345_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 13) -#define BCM_6345_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 14) -#define BCM_6345_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 15) -#define BCM_6345_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 16) -#define BCM_6345_USB_ISO_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 17) -#define BCM_6345_USB_ISO_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 18) +#define BCM_6345_ENET1_RXDMA_IRQ 0 +#define BCM_6345_ENET1_TXDMA_IRQ 0 +#define BCM_6345_PCI_IRQ 0 +#define BCM_6345_PCMCIA_IRQ 0 +#define BCM_6345_ATM_IRQ 0 +#define BCM_6345_ENETSW_RXDMA0_IRQ 0 +#define BCM_6345_ENETSW_RXDMA1_IRQ 0 +#define BCM_6345_ENETSW_RXDMA2_IRQ 0 +#define BCM_6345_ENETSW_RXDMA3_IRQ 0 +#define BCM_6345_ENETSW_TXDMA0_IRQ 0 +#define BCM_6345_ENETSW_TXDMA1_IRQ 0 +#define BCM_6345_ENETSW_TXDMA2_IRQ 0 +#define BCM_6345_ENETSW_TXDMA3_IRQ 0 +#define BCM_6345_XTM_IRQ 0 +#define BCM_6345_XTM_DMA0_IRQ 0 /* * 6348 irqs */ #define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) #define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6348_UART1_IRQ 0 #define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4) -#define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7) #define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7) #define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) #define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12) +#define BCM_6348_EHCI0_IRQ 0 #define BCM_6348_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 20) #define BCM_6348_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 21) #define BCM_6348_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 22) #define BCM_6348_ENET1_TXDMA_IRQ (IRQ_INTERNAL_BASE + 23) -#define BCM_6348_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24) #define BCM_6348_PCI_IRQ (IRQ_INTERNAL_BASE + 24) +#define BCM_6348_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24) +#define BCM_6348_ATM_IRQ (IRQ_INTERNAL_BASE + 5) +#define BCM_6348_ENETSW_RXDMA0_IRQ 0 +#define BCM_6348_ENETSW_RXDMA1_IRQ 0 +#define BCM_6348_ENETSW_RXDMA2_IRQ 0 +#define BCM_6348_ENETSW_RXDMA3_IRQ 0 +#define BCM_6348_ENETSW_TXDMA0_IRQ 0 +#define BCM_6348_ENETSW_TXDMA1_IRQ 0 +#define BCM_6348_ENETSW_TXDMA2_IRQ 0 +#define BCM_6348_ENETSW_TXDMA3_IRQ 0 +#define BCM_6348_XTM_IRQ 0 +#define BCM_6348_XTM_DMA0_IRQ 0 /* * 6358 irqs @@ -525,21 +601,108 @@ enum bcm63xx_irq { #define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) #define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2) #define BCM_6358_UART1_IRQ (IRQ_INTERNAL_BASE + 3) -#define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5) -#define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6) +#define BCM_6358_DSL_IRQ (IRQ_INTERNAL_BASE + 29) #define BCM_6358_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6) #define BCM_6358_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) +#define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5) #define BCM_6358_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10) #define BCM_6358_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15) #define BCM_6358_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 16) #define BCM_6358_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 17) #define BCM_6358_ENET1_TXDMA_IRQ (IRQ_INTERNAL_BASE + 18) -#define BCM_6358_DSL_IRQ (IRQ_INTERNAL_BASE + 29) #define BCM_6358_PCI_IRQ (IRQ_INTERNAL_BASE + 31) #define BCM_6358_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24) +#define BCM_6358_ATM_IRQ (IRQ_INTERNAL_BASE + 19) +#define BCM_6358_ENETSW_RXDMA0_IRQ 0 +#define BCM_6358_ENETSW_RXDMA1_IRQ 0 +#define BCM_6358_ENETSW_RXDMA2_IRQ 0 +#define BCM_6358_ENETSW_RXDMA3_IRQ 0 +#define BCM_6358_ENETSW_TXDMA0_IRQ 0 +#define BCM_6358_ENETSW_TXDMA1_IRQ 0 +#define BCM_6358_ENETSW_TXDMA2_IRQ 0 +#define BCM_6358_ENETSW_TXDMA3_IRQ 0 +#define BCM_6358_XTM_IRQ 0 +#define BCM_6358_XTM_DMA0_IRQ 0 + +#define BCM_6358_PCM_DMA0_IRQ (IRQ_INTERNAL_BASE + 23) +#define BCM_6358_PCM_DMA1_IRQ (IRQ_INTERNAL_BASE + 24) +#define BCM_6358_EXT_IRQ0 (IRQ_INTERNAL_BASE + 25) +#define BCM_6358_EXT_IRQ1 (IRQ_INTERNAL_BASE + 26) +#define BCM_6358_EXT_IRQ2 (IRQ_INTERNAL_BASE + 27) +#define BCM_6358_EXT_IRQ3 (IRQ_INTERNAL_BASE + 28) + +/* + * 6368 irqs + */ +#define BCM_6368_HIGH_IRQ_BASE (IRQ_INTERNAL_BASE + 32) + +#define BCM_6368_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) +#define BCM_6368_UART0_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6368_UART1_IRQ (IRQ_INTERNAL_BASE + 3) +#define BCM_6368_DSL_IRQ (IRQ_INTERNAL_BASE + 4) +#define BCM_6368_ENET0_IRQ 0 +#define BCM_6368_ENET1_IRQ 0 +#define BCM_6368_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 15) +#define BCM_6368_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5) +#define BCM_6368_EHCI0_IRQ (IRQ_INTERNAL_BASE + 7) +#define BCM_6368_PCMCIA_IRQ 0 +#define BCM_6368_ENET0_RXDMA_IRQ 0 +#define BCM_6368_ENET0_TXDMA_IRQ 0 +#define BCM_6368_ENET1_RXDMA_IRQ 0 +#define BCM_6368_ENET1_TXDMA_IRQ 0 +#define BCM_6368_PCI_IRQ (IRQ_INTERNAL_BASE + 13) +#define BCM_6368_ATM_IRQ 0 +#define BCM_6368_ENETSW_RXDMA0_IRQ (BCM_6368_HIGH_IRQ_BASE + 0) +#define BCM_6368_ENETSW_RXDMA1_IRQ (BCM_6368_HIGH_IRQ_BASE + 1) +#define BCM_6368_ENETSW_RXDMA2_IRQ (BCM_6368_HIGH_IRQ_BASE + 2) +#define BCM_6368_ENETSW_RXDMA3_IRQ (BCM_6368_HIGH_IRQ_BASE + 3) +#define BCM_6368_ENETSW_TXDMA0_IRQ (BCM_6368_HIGH_IRQ_BASE + 4) +#define BCM_6368_ENETSW_TXDMA1_IRQ (BCM_6368_HIGH_IRQ_BASE + 5) +#define BCM_6368_ENETSW_TXDMA2_IRQ (BCM_6368_HIGH_IRQ_BASE + 6) +#define BCM_6368_ENETSW_TXDMA3_IRQ (BCM_6368_HIGH_IRQ_BASE + 7) +#define BCM_6368_XTM_IRQ (IRQ_INTERNAL_BASE + 11) +#define BCM_6368_XTM_DMA0_IRQ (BCM_6368_HIGH_IRQ_BASE + 8) + +#define BCM_6368_PCM_DMA0_IRQ (BCM_6368_HIGH_IRQ_BASE + 30) +#define BCM_6368_PCM_DMA1_IRQ (BCM_6368_HIGH_IRQ_BASE + 31) +#define BCM_6368_EXT_IRQ0 (IRQ_INTERNAL_BASE + 20) +#define BCM_6368_EXT_IRQ1 (IRQ_INTERNAL_BASE + 21) +#define BCM_6368_EXT_IRQ2 (IRQ_INTERNAL_BASE + 22) +#define BCM_6368_EXT_IRQ3 (IRQ_INTERNAL_BASE + 23) +#define BCM_6368_EXT_IRQ4 (IRQ_INTERNAL_BASE + 24) +#define BCM_6368_EXT_IRQ5 (IRQ_INTERNAL_BASE + 25) extern const int *bcm63xx_irqs; +#define __GEN_CPU_IRQ_TABLE(__cpu) \ + [IRQ_TIMER] = BCM_## __cpu ##_TIMER_IRQ, \ + [IRQ_UART0] = BCM_## __cpu ##_UART0_IRQ, \ + [IRQ_UART1] = BCM_## __cpu ##_UART1_IRQ, \ + [IRQ_DSL] = BCM_## __cpu ##_DSL_IRQ, \ + [IRQ_ENET0] = BCM_## __cpu ##_ENET0_IRQ, \ + [IRQ_ENET1] = BCM_## __cpu ##_ENET1_IRQ, \ + [IRQ_ENET_PHY] = BCM_## __cpu ##_ENET_PHY_IRQ, \ + [IRQ_OHCI0] = BCM_## __cpu ##_OHCI0_IRQ, \ + [IRQ_EHCI0] = BCM_## __cpu ##_EHCI0_IRQ, \ + [IRQ_ENET0_RXDMA] = BCM_## __cpu ##_ENET0_RXDMA_IRQ, \ + [IRQ_ENET0_TXDMA] = BCM_## __cpu ##_ENET0_TXDMA_IRQ, \ + [IRQ_ENET1_RXDMA] = BCM_## __cpu ##_ENET1_RXDMA_IRQ, \ + [IRQ_ENET1_TXDMA] = BCM_## __cpu ##_ENET1_TXDMA_IRQ, \ + [IRQ_PCI] = BCM_## __cpu ##_PCI_IRQ, \ + [IRQ_PCMCIA] = BCM_## __cpu ##_PCMCIA_IRQ, \ + [IRQ_ATM] = BCM_## __cpu ##_ATM_IRQ, \ + [IRQ_ENETSW_RXDMA0] = BCM_## __cpu ##_ENETSW_RXDMA0_IRQ, \ + [IRQ_ENETSW_RXDMA1] = BCM_## __cpu ##_ENETSW_RXDMA1_IRQ, \ + [IRQ_ENETSW_RXDMA2] = BCM_## __cpu ##_ENETSW_RXDMA2_IRQ, \ + [IRQ_ENETSW_RXDMA3] = BCM_## __cpu ##_ENETSW_RXDMA3_IRQ, \ + [IRQ_ENETSW_TXDMA0] = BCM_## __cpu ##_ENETSW_TXDMA0_IRQ, \ + [IRQ_ENETSW_TXDMA1] = BCM_## __cpu ##_ENETSW_TXDMA1_IRQ, \ + [IRQ_ENETSW_TXDMA2] = BCM_## __cpu ##_ENETSW_TXDMA2_IRQ, \ + [IRQ_ENETSW_TXDMA3] = BCM_## __cpu ##_ENETSW_TXDMA3_IRQ, \ + [IRQ_XTM] = BCM_## __cpu ##_XTM_IRQ, \ + [IRQ_XTM_DMA0] = BCM_## __cpu ##_XTM_DMA0_IRQ, \ + static inline int bcm63xx_get_irq_number(enum bcm63xx_irq irq) { return bcm63xx_irqs[irq]; @@ -550,4 +713,8 @@ static inline int bcm63xx_get_irq_number(enum bcm63xx_irq irq) */ unsigned int bcm63xx_get_memory_size(void); +void bcm63xx_machine_halt(void); + +void bcm63xx_machine_reboot(void); + #endif /* !BCM63XX_CPU_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h index 3999ec0aa7f5..3d5de96d4036 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h @@ -14,6 +14,8 @@ static inline unsigned long bcm63xx_gpio_count(void) return 8; case BCM6345_CPU_ID: return 16; + case BCM6368_CPU_ID: + return 38; case BCM6348_CPU_ID: default: return 37; diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h index 91180fac6ed9..72477a6441dd 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h @@ -49,9 +49,11 @@ #define bcm_readb(a) (*(volatile unsigned char *) BCM_REGS_VA(a)) #define bcm_readw(a) (*(volatile unsigned short *) BCM_REGS_VA(a)) #define bcm_readl(a) (*(volatile unsigned int *) BCM_REGS_VA(a)) +#define bcm_readq(a) (*(volatile u64 *) BCM_REGS_VA(a)) #define bcm_writeb(v, a) (*(volatile unsigned char *) BCM_REGS_VA((a)) = (v)) #define bcm_writew(v, a) (*(volatile unsigned short *) BCM_REGS_VA((a)) = (v)) #define bcm_writel(v, a) (*(volatile unsigned int *) BCM_REGS_VA((a)) = (v)) +#define bcm_writeq(v, a) (*(volatile u64 *) BCM_REGS_VA((a)) = (v)) /* * IO helpers to access register set for current CPU diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h index 5f95577c8213..0c3074b871b8 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h @@ -3,13 +3,11 @@ #include <bcm63xx_cpu.h> -#define IRQ_MIPS_BASE 0 #define IRQ_INTERNAL_BASE 8 - -#define IRQ_EXT_BASE (IRQ_MIPS_BASE + 3) -#define IRQ_EXT_0 (IRQ_EXT_BASE + 0) -#define IRQ_EXT_1 (IRQ_EXT_BASE + 1) -#define IRQ_EXT_2 (IRQ_EXT_BASE + 2) -#define IRQ_EXT_3 (IRQ_EXT_BASE + 3) +#define IRQ_EXTERNAL_BASE 100 +#define IRQ_EXT_0 (IRQ_EXTERNAL_BASE + 0) +#define IRQ_EXT_1 (IRQ_EXTERNAL_BASE + 1) +#define IRQ_EXT_2 (IRQ_EXTERNAL_BASE + 2) +#define IRQ_EXT_3 (IRQ_EXTERNAL_BASE + 3) #endif /* ! BCM63XX_IRQ_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index 0ed5230243c9..94d4faad29a1 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -83,30 +83,86 @@ CKCTL_6358_USBSU_EN | \ CKCTL_6358_EPHY_EN) +#define CKCTL_6368_VDSL_QPROC_EN (1 << 2) +#define CKCTL_6368_VDSL_AFE_EN (1 << 3) +#define CKCTL_6368_VDSL_BONDING_EN (1 << 4) +#define CKCTL_6368_VDSL_EN (1 << 5) +#define CKCTL_6368_PHYMIPS_EN (1 << 6) +#define CKCTL_6368_SWPKT_USB_EN (1 << 7) +#define CKCTL_6368_SWPKT_SAR_EN (1 << 8) +#define CKCTL_6368_SPI_CLK_EN (1 << 9) +#define CKCTL_6368_USBD_CLK_EN (1 << 10) +#define CKCTL_6368_SAR_CLK_EN (1 << 11) +#define CKCTL_6368_ROBOSW_CLK_EN (1 << 12) +#define CKCTL_6368_UTOPIA_CLK_EN (1 << 13) +#define CKCTL_6368_PCM_CLK_EN (1 << 14) +#define CKCTL_6368_USBH_CLK_EN (1 << 15) +#define CKCTL_6368_DISABLE_GLESS_EN (1 << 16) +#define CKCTL_6368_NAND_CLK_EN (1 << 17) +#define CKCTL_6368_IPSEC_CLK_EN (1 << 17) + +#define CKCTL_6368_ALL_SAFE_EN (CKCTL_6368_SWPKT_USB_EN | \ + CKCTL_6368_SWPKT_SAR_EN | \ + CKCTL_6368_SPI_CLK_EN | \ + CKCTL_6368_USBD_CLK_EN | \ + CKCTL_6368_SAR_CLK_EN | \ + CKCTL_6368_ROBOSW_CLK_EN | \ + CKCTL_6368_UTOPIA_CLK_EN | \ + CKCTL_6368_PCM_CLK_EN | \ + CKCTL_6368_USBH_CLK_EN | \ + CKCTL_6368_DISABLE_GLESS_EN | \ + CKCTL_6368_NAND_CLK_EN | \ + CKCTL_6368_IPSEC_CLK_EN) + /* System PLL Control register */ #define PERF_SYS_PLL_CTL_REG 0x8 #define SYS_PLL_SOFT_RESET 0x1 /* Interrupt Mask register */ -#define PERF_IRQMASK_REG 0xc +#define PERF_IRQMASK_6338_REG 0xc +#define PERF_IRQMASK_6345_REG 0xc +#define PERF_IRQMASK_6348_REG 0xc +#define PERF_IRQMASK_6358_REG 0xc +#define PERF_IRQMASK_6368_REG 0x20 /* Interrupt Status register */ -#define PERF_IRQSTAT_REG 0x10 +#define PERF_IRQSTAT_6338_REG 0x10 +#define PERF_IRQSTAT_6345_REG 0x10 +#define PERF_IRQSTAT_6348_REG 0x10 +#define PERF_IRQSTAT_6358_REG 0x10 +#define PERF_IRQSTAT_6368_REG 0x28 /* External Interrupt Configuration register */ -#define PERF_EXTIRQ_CFG_REG 0x14 +#define PERF_EXTIRQ_CFG_REG_6338 0x14 +#define PERF_EXTIRQ_CFG_REG_6348 0x14 +#define PERF_EXTIRQ_CFG_REG_6358 0x14 +#define PERF_EXTIRQ_CFG_REG_6368 0x18 + +#define PERF_EXTIRQ_CFG_REG2_6368 0x1c + +/* for 6348 only */ +#define EXTIRQ_CFG_SENSE_6348(x) (1 << (x)) +#define EXTIRQ_CFG_STAT_6348(x) (1 << (x + 5)) +#define EXTIRQ_CFG_CLEAR_6348(x) (1 << (x + 10)) +#define EXTIRQ_CFG_MASK_6348(x) (1 << (x + 15)) +#define EXTIRQ_CFG_BOTHEDGE_6348(x) (1 << (x + 20)) +#define EXTIRQ_CFG_LEVELSENSE_6348(x) (1 << (x + 25)) +#define EXTIRQ_CFG_CLEAR_ALL_6348 (0xf << 10) +#define EXTIRQ_CFG_MASK_ALL_6348 (0xf << 15) + +/* for all others */ #define EXTIRQ_CFG_SENSE(x) (1 << (x)) -#define EXTIRQ_CFG_STAT(x) (1 << (x + 5)) -#define EXTIRQ_CFG_CLEAR(x) (1 << (x + 10)) -#define EXTIRQ_CFG_MASK(x) (1 << (x + 15)) -#define EXTIRQ_CFG_BOTHEDGE(x) (1 << (x + 20)) -#define EXTIRQ_CFG_LEVELSENSE(x) (1 << (x + 25)) - -#define EXTIRQ_CFG_CLEAR_ALL (0xf << 10) -#define EXTIRQ_CFG_MASK_ALL (0xf << 15) +#define EXTIRQ_CFG_STAT(x) (1 << (x + 4)) +#define EXTIRQ_CFG_CLEAR(x) (1 << (x + 8)) +#define EXTIRQ_CFG_MASK(x) (1 << (x + 12)) +#define EXTIRQ_CFG_BOTHEDGE(x) (1 << (x + 16)) +#define EXTIRQ_CFG_LEVELSENSE(x) (1 << (x + 20)) +#define EXTIRQ_CFG_CLEAR_ALL (0xf << 8) +#define EXTIRQ_CFG_MASK_ALL (0xf << 12) /* Soft Reset register */ #define PERF_SOFTRESET_REG 0x28 +#define PERF_SOFTRESET_6368_REG 0x10 #define SOFTRESET_6338_SPI_MASK (1 << 0) #define SOFTRESET_6338_ENET_MASK (1 << 2) @@ -147,6 +203,15 @@ SOFTRESET_6348_ACLC_MASK | \ SOFTRESET_6348_ADSLMIPSPLL_MASK) +#define SOFTRESET_6368_SPI_MASK (1 << 0) +#define SOFTRESET_6368_MPI_MASK (1 << 3) +#define SOFTRESET_6368_EPHY_MASK (1 << 6) +#define SOFTRESET_6368_SAR_MASK (1 << 7) +#define SOFTRESET_6368_ENETSW_MASK (1 << 10) +#define SOFTRESET_6368_USBS_MASK (1 << 11) +#define SOFTRESET_6368_USBH_MASK (1 << 12) +#define SOFTRESET_6368_PCM_MASK (1 << 13) + /* MIPS PLL control register */ #define PERF_MIPSPLLCTL_REG 0x34 #define MIPSPLLCTL_N1_SHIFT 20 @@ -372,6 +437,7 @@ #define GPIO_CTL_LO_REG 0x4 #define GPIO_DATA_HI_REG 0x8 #define GPIO_DATA_LO_REG 0xC +#define GPIO_DATA_LO_REG_6345 0x8 /* GPIO mux registers and constants */ #define GPIO_MODE_REG 0x18 @@ -402,6 +468,44 @@ #define GPIO_MODE_6358_SERIAL_LED (1 << 10) #define GPIO_MODE_6358_UTOPIA (1 << 12) +#define GPIO_MODE_6368_ANALOG_AFE_0 (1 << 0) +#define GPIO_MODE_6368_ANALOG_AFE_1 (1 << 1) +#define GPIO_MODE_6368_SYS_IRQ (1 << 2) +#define GPIO_MODE_6368_SERIAL_LED_DATA (1 << 3) +#define GPIO_MODE_6368_SERIAL_LED_CLK (1 << 4) +#define GPIO_MODE_6368_INET_LED (1 << 5) +#define GPIO_MODE_6368_EPHY0_LED (1 << 6) +#define GPIO_MODE_6368_EPHY1_LED (1 << 7) +#define GPIO_MODE_6368_EPHY2_LED (1 << 8) +#define GPIO_MODE_6368_EPHY3_LED (1 << 9) +#define GPIO_MODE_6368_ROBOSW_LED_DAT (1 << 10) +#define GPIO_MODE_6368_ROBOSW_LED_CLK (1 << 11) +#define GPIO_MODE_6368_ROBOSW_LED0 (1 << 12) +#define GPIO_MODE_6368_ROBOSW_LED1 (1 << 13) +#define GPIO_MODE_6368_USBD_LED (1 << 14) +#define GPIO_MODE_6368_NTR_PULSE (1 << 15) +#define GPIO_MODE_6368_PCI_REQ1 (1 << 16) +#define GPIO_MODE_6368_PCI_GNT1 (1 << 17) +#define GPIO_MODE_6368_PCI_INTB (1 << 18) +#define GPIO_MODE_6368_PCI_REQ0 (1 << 19) +#define GPIO_MODE_6368_PCI_GNT0 (1 << 20) +#define GPIO_MODE_6368_PCMCIA_CD1 (1 << 22) +#define GPIO_MODE_6368_PCMCIA_CD2 (1 << 23) +#define GPIO_MODE_6368_PCMCIA_VS1 (1 << 24) +#define GPIO_MODE_6368_PCMCIA_VS2 (1 << 25) +#define GPIO_MODE_6368_EBI_CS2 (1 << 26) +#define GPIO_MODE_6368_EBI_CS3 (1 << 27) +#define GPIO_MODE_6368_SPI_SSN2 (1 << 28) +#define GPIO_MODE_6368_SPI_SSN3 (1 << 29) +#define GPIO_MODE_6368_SPI_SSN4 (1 << 30) +#define GPIO_MODE_6368_SPI_SSN5 (1 << 31) + + +#define GPIO_BASEMODE_6368_REG 0x38 +#define GPIO_BASEMODE_6368_UART2 0x1 +#define GPIO_BASEMODE_6368_GPIO 0x0 +#define GPIO_BASEMODE_6368_MASK 0x7 +/* those bits must be kept as read in gpio basemode register*/ /************************************************************************* * _REG relative to RSET_ENET @@ -548,6 +652,56 @@ /************************************************************************* + * _REG relative to RSET_ENETDMAC + *************************************************************************/ + +/* Channel Configuration register */ +#define ENETDMAC_CHANCFG_REG(x) ((x) * 0x10) +#define ENETDMAC_CHANCFG_EN_SHIFT 0 +#define ENETDMAC_CHANCFG_EN_MASK (1 << ENETDMA_CHANCFG_EN_SHIFT) +#define ENETDMAC_CHANCFG_PKTHALT_SHIFT 1 +#define ENETDMAC_CHANCFG_PKTHALT_MASK (1 << ENETDMA_CHANCFG_PKTHALT_SHIFT) + +/* Interrupt Control/Status register */ +#define ENETDMAC_IR_REG(x) (0x4 + (x) * 0x10) +#define ENETDMAC_IR_BUFDONE_MASK (1 << 0) +#define ENETDMAC_IR_PKTDONE_MASK (1 << 1) +#define ENETDMAC_IR_NOTOWNER_MASK (1 << 2) + +/* Interrupt Mask register */ +#define ENETDMAC_IRMASK_REG(x) (0x8 + (x) * 0x10) + +/* Maximum Burst Length */ +#define ENETDMAC_MAXBURST_REG(x) (0xc + (x) * 0x10) + + +/************************************************************************* + * _REG relative to RSET_ENETDMAS + *************************************************************************/ + +/* Ring Start Address register */ +#define ENETDMAS_RSTART_REG(x) ((x) * 0x10) + +/* State Ram Word 2 */ +#define ENETDMAS_SRAM2_REG(x) (0x4 + (x) * 0x10) + +/* State Ram Word 3 */ +#define ENETDMAS_SRAM3_REG(x) (0x8 + (x) * 0x10) + +/* State Ram Word 4 */ +#define ENETDMAS_SRAM4_REG(x) (0xc + (x) * 0x10) + + +/************************************************************************* + * _REG relative to RSET_ENETSW + *************************************************************************/ + +/* MIB register */ +#define ENETSW_MIB_REG(x) (0x2800 + (x) * 4) +#define ENETSW_MIB_REG_COUNT 47 + + +/************************************************************************* * _REG relative to RSET_OHCI_PRIV *************************************************************************/ @@ -562,7 +716,9 @@ * _REG relative to RSET_USBH_PRIV *************************************************************************/ -#define USBH_PRIV_SWAP_REG 0x0 +#define USBH_PRIV_SWAP_6358_REG 0x0 +#define USBH_PRIV_SWAP_6368_REG 0x1c + #define USBH_PRIV_SWAP_EHCI_ENDN_SHIFT 4 #define USBH_PRIV_SWAP_EHCI_ENDN_MASK (1 << USBH_PRIV_SWAP_EHCI_ENDN_SHIFT) #define USBH_PRIV_SWAP_EHCI_DATA_SHIFT 3 @@ -572,7 +728,13 @@ #define USBH_PRIV_SWAP_OHCI_DATA_SHIFT 0 #define USBH_PRIV_SWAP_OHCI_DATA_MASK (1 << USBH_PRIV_SWAP_OHCI_DATA_SHIFT) -#define USBH_PRIV_TEST_REG 0x24 +#define USBH_PRIV_TEST_6358_REG 0x24 +#define USBH_PRIV_TEST_6368_REG 0x14 + +#define USBH_PRIV_SETUP_6368_REG 0x28 +#define USBH_PRIV_SETUP_IOC_SHIFT 4 +#define USBH_PRIV_SETUP_IOC_MASK (1 << USBH_PRIV_SETUP_IOC_SHIFT) + /************************************************************************* @@ -734,6 +896,8 @@ #define SDRAM_CFG_BANK_SHIFT 13 #define SDRAM_CFG_BANK_MASK (1 << SDRAM_CFG_BANK_SHIFT) +#define SDRAM_MBASE_REG 0xc + #define SDRAM_PRIO_REG 0x2C #define SDRAM_PRIO_MIPS_SHIFT 29 #define SDRAM_PRIO_MIPS_MASK (1 << SDRAM_PRIO_MIPS_SHIFT) @@ -768,4 +932,45 @@ #define DMIPSPLLCFG_N2_SHIFT 29 #define DMIPSPLLCFG_N2_MASK (0x7 << DMIPSPLLCFG_N2_SHIFT) +#define DDR_DMIPSPLLCFG_6368_REG 0x20 +#define DMIPSPLLCFG_6368_P1_SHIFT 0 +#define DMIPSPLLCFG_6368_P1_MASK (0xf << DMIPSPLLCFG_6368_P1_SHIFT) +#define DMIPSPLLCFG_6368_P2_SHIFT 4 +#define DMIPSPLLCFG_6368_P2_MASK (0xf << DMIPSPLLCFG_6368_P2_SHIFT) +#define DMIPSPLLCFG_6368_NDIV_SHIFT 16 +#define DMIPSPLLCFG_6368_NDIV_MASK (0x1ff << DMIPSPLLCFG_6368_NDIV_SHIFT) + +#define DDR_DMIPSPLLDIV_6368_REG 0x24 +#define DMIPSPLLDIV_6368_MDIV_SHIFT 0 +#define DMIPSPLLDIV_6368_MDIV_MASK (0xff << DMIPSPLLDIV_6368_MDIV_SHIFT) + + +/************************************************************************* + * _REG relative to RSET_M2M + *************************************************************************/ + +#define M2M_RX 0 +#define M2M_TX 1 + +#define M2M_SRC_REG(x) ((x) * 0x40 + 0x00) +#define M2M_DST_REG(x) ((x) * 0x40 + 0x04) +#define M2M_SIZE_REG(x) ((x) * 0x40 + 0x08) + +#define M2M_CTRL_REG(x) ((x) * 0x40 + 0x0c) +#define M2M_CTRL_ENABLE_MASK (1 << 0) +#define M2M_CTRL_IRQEN_MASK (1 << 1) +#define M2M_CTRL_ERROR_CLR_MASK (1 << 6) +#define M2M_CTRL_DONE_CLR_MASK (1 << 7) +#define M2M_CTRL_NOINC_MASK (1 << 8) +#define M2M_CTRL_PCMCIASWAP_MASK (1 << 9) +#define M2M_CTRL_SWAPBYTE_MASK (1 << 10) +#define M2M_CTRL_ENDIAN_MASK (1 << 11) + +#define M2M_STAT_REG(x) ((x) * 0x40 + 0x10) +#define M2M_STAT_DONE (1 << 0) +#define M2M_STAT_ERROR (1 << 1) + +#define M2M_SRCID_REG(x) ((x) * 0x40 + 0x14) +#define M2M_DSTID_REG(x) ((x) * 0x40 + 0x18) + #endif /* BCM63XX_REGS_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/ioremap.h b/arch/mips/include/asm/mach-bcm63xx/ioremap.h new file mode 100644 index 000000000000..ef94ba73646e --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h @@ -0,0 +1,42 @@ +#ifndef BCM63XX_IOREMAP_H_ +#define BCM63XX_IOREMAP_H_ + +#include <bcm63xx_cpu.h> + +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} + +static inline int is_bcm63xx_internal_registers(phys_t offset) +{ + switch (bcm63xx_get_cpu_id()) { + case BCM6338_CPU_ID: + case BCM6345_CPU_ID: + case BCM6348_CPU_ID: + case BCM6358_CPU_ID: + if (offset >= 0xfff00000) + return 1; + break; + case BCM6368_CPU_ID: + if (offset >= 0xb0000000 && offset < 0xb1000000) + return 1; + break; + } + return 0; +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ + if (is_bcm63xx_internal_registers(offset)) + return (void __iomem *)offset; + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return is_bcm63xx_internal_registers((unsigned long)addr); +} + +#endif /* BCM63XX_IOREMAP_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/irq.h b/arch/mips/include/asm/mach-bcm63xx/irq.h new file mode 100644 index 000000000000..9332e788a5c9 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/irq.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_BCM63XX_IRQ_H +#define __ASM_MACH_BCM63XX_IRQ_H + +#define NR_IRQS 128 +#define MIPS_CPU_IRQ_BASE 0 + +#endif diff --git a/arch/mips/include/asm/mach-db1x00/bcsr.h b/arch/mips/include/asm/mach-db1x00/bcsr.h index 618d2de02ed3..bb9fc23d853a 100644 --- a/arch/mips/include/asm/mach-db1x00/bcsr.h +++ b/arch/mips/include/asm/mach-db1x00/bcsr.h @@ -34,6 +34,8 @@ #define PB1200_BCSR_PHYS_ADDR 0x0D800000 #define PB1200_BCSR_HEXLED_OFS 0x00400000 +#define DB1300_BCSR_PHYS_ADDR 0x19800000 +#define DB1300_BCSR_HEXLED_OFS 0x00400000 enum bcsr_id { /* BCSR base 1 */ @@ -105,6 +107,7 @@ enum bcsr_whoami_boards { BCSR_WHOAMI_PB1200 = BCSR_WHOAMI_PB1200_DDR1, BCSR_WHOAMI_PB1200_DDR2, BCSR_WHOAMI_DB1200, + BCSR_WHOAMI_DB1300, }; /* STATUS reg. Unless otherwise noted, they're valid on all boards. @@ -118,12 +121,12 @@ enum bcsr_whoami_boards { #define BCSR_STATUS_SRAMWIDTH 0x0080 #define BCSR_STATUS_FLASHBUSY 0x0100 #define BCSR_STATUS_ROMBUSY 0x0400 -#define BCSR_STATUS_SD0WP 0x0400 /* DB1200 */ +#define BCSR_STATUS_SD0WP 0x0400 /* DB1200/DB1300:SD1 */ #define BCSR_STATUS_SD1WP 0x0800 #define BCSR_STATUS_USBOTGID 0x0800 /* PB/DB1550 */ #define BCSR_STATUS_DB1000_SWAPBOOT 0x2000 -#define BCSR_STATUS_DB1200_SWAPBOOT 0x0040 /* DB1200 */ -#define BCSR_STATUS_IDECBLID 0x0200 /* DB1200 */ +#define BCSR_STATUS_DB1200_SWAPBOOT 0x0040 /* DB1200/1300 */ +#define BCSR_STATUS_IDECBLID 0x0200 /* DB1200/1300 */ #define BCSR_STATUS_DB1200_U0RXD 0x1000 /* DB1200 */ #define BCSR_STATUS_DB1200_U1RXD 0x2000 /* DB1200 */ #define BCSR_STATUS_FLASHDEN 0xC000 @@ -133,6 +136,11 @@ enum bcsr_whoami_boards { #define BCSR_STATUS_PB1550_U1RXD 0x2000 /* PB1550 */ #define BCSR_STATUS_PB1550_U3RXD 0x8000 /* PB1550 */ +#define BCSR_STATUS_CFWP 0x4000 /* DB1300 */ +#define BCSR_STATUS_USBOCn 0x2000 /* DB1300 */ +#define BCSR_STATUS_OTGOCn 0x1000 /* DB1300 */ +#define BCSR_STATUS_DCDMARQ 0x0010 /* DB1300 */ +#define BCSR_STATUS_IDEDMARQ 0x0020 /* DB1300 */ /* DB/PB1000,1100,1500,1550 */ #define BCSR_RESETS_PHY0 0x0001 @@ -155,17 +163,17 @@ enum bcsr_whoami_boards { #define BCSR_BOARD_GPIO200RST 0x0400 #define BCSR_BOARD_PCICLKOUT 0x0800 #define BCSR_BOARD_PCICFG 0x1000 -#define BCSR_BOARD_SPISEL 0x4000 /* PB/DB1550 */ +#define BCSR_BOARD_SPISEL 0x2000 /* PB/DB1550 */ #define BCSR_BOARD_SD0WP 0x4000 /* DB1100 */ #define BCSR_BOARD_SD1WP 0x8000 /* DB1100 */ -/* DB/PB1200 */ +/* DB/PB1200/1300 */ #define BCSR_RESETS_ETH 0x0001 #define BCSR_RESETS_CAMERA 0x0002 #define BCSR_RESETS_DC 0x0004 #define BCSR_RESETS_IDE 0x0008 -#define BCSR_RESETS_TV 0x0010 /* DB1200 */ +#define BCSR_RESETS_TV 0x0010 /* DB1200/1300 */ /* Not resets but in the same register */ #define BCSR_RESETS_PWMR1MUX 0x0800 /* DB1200 */ #define BCSR_RESETS_PB1200_WSCFSM 0x0800 /* PB1200 */ @@ -174,13 +182,22 @@ enum bcsr_whoami_boards { #define BCSR_RESETS_SPISEL 0x4000 #define BCSR_RESETS_SD1MUX 0x8000 /* PB1200 */ +#define BCSR_RESETS_VDDQSHDN 0x0200 /* DB1300 */ +#define BCSR_RESETS_OTPPGM 0x0400 /* DB1300 */ +#define BCSR_RESETS_OTPSCLK 0x0800 /* DB1300 */ +#define BCSR_RESETS_OTPWRPROT 0x1000 /* DB1300 */ +#define BCSR_RESETS_OTPCSB 0x2000 /* DB1300 */ +#define BCSR_RESETS_OTGPWR 0x4000 /* DB1300 */ +#define BCSR_RESETS_USBHPWR 0x8000 /* DB1300 */ + #define BCSR_BOARD_LCDVEE 0x0001 #define BCSR_BOARD_LCDVDD 0x0002 #define BCSR_BOARD_LCDBL 0x0004 #define BCSR_BOARD_CAMSNAP 0x0010 #define BCSR_BOARD_CAMPWR 0x0020 #define BCSR_BOARD_SD0PWR 0x0040 - +#define BCSR_BOARD_CAMCS 0x0010 /* DB1300 */ +#define BCSR_BOARD_HDMI_DE 0x0040 /* DB1300 */ #define BCSR_SWITCHES_DIP 0x00FF #define BCSR_SWITCHES_DIP_1 0x0080 @@ -214,7 +231,10 @@ enum bcsr_whoami_boards { #define BCSR_SYSTEM_RESET 0x8000 /* clear to reset */ #define BCSR_SYSTEM_PWROFF 0x4000 /* set to power off */ #define BCSR_SYSTEM_VDDI 0x001F /* PB1xxx boards */ - +#define BCSR_SYSTEM_DEBUGCSMASK 0x003F /* DB1300 */ +#define BCSR_SYSTEM_UDMAMODE 0x0100 /* DB1300 */ +#define BCSR_SYSTEM_WAKEONIRQ 0x0200 /* DB1300 */ +#define BCSR_SYSTEM_VDDI1300 0x3C00 /* DB1300 */ diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h index 7a39657108c4..b2a8319521e5 100644 --- a/arch/mips/include/asm/mach-db1x00/db1200.h +++ b/arch/mips/include/asm/mach-db1x00/db1200.h @@ -43,15 +43,20 @@ #define BCSR_INT_PC1EJECT 0x0800 #define BCSR_INT_SD0INSERT 0x1000 #define BCSR_INT_SD0EJECT 0x2000 +#define BCSR_INT_SD1INSERT 0x4000 +#define BCSR_INT_SD1EJECT 0x8000 -#define IDE_PHYS_ADDR 0x18800000 #define IDE_REG_SHIFT 5 -#define DB1200_IDE_PHYS_ADDR IDE_PHYS_ADDR +#define DB1200_IDE_PHYS_ADDR 0x18800000 #define DB1200_IDE_PHYS_LEN (16 << IDE_REG_SHIFT) #define DB1200_ETH_PHYS_ADDR 0x19000300 #define DB1200_NAND_PHYS_ADDR 0x20000000 +#define PB1200_IDE_PHYS_ADDR 0x0C800000 +#define PB1200_ETH_PHYS_ADDR 0x0D000300 +#define PB1200_NAND_PHYS_ADDR 0x1C000000 + /* * External Interrupts for DBAu1200 as of 8/6/2004. * Bit positions in the CPLD registers can be calculated by taking @@ -77,6 +82,8 @@ enum external_db1200_ints { DB1200_PC1_EJECT_INT, DB1200_SD0_INSERT_INT, DB1200_SD0_EJECT_INT, + PB1200_SD1_INSERT_INT, + PB1200_SD1_EJECT_INT, DB1200_INT_END = DB1200_INT_BEGIN + 15, }; diff --git a/arch/mips/include/asm/mach-db1x00/db1300.h b/arch/mips/include/asm/mach-db1x00/db1300.h new file mode 100644 index 000000000000..7fe5fb3ba877 --- /dev/null +++ b/arch/mips/include/asm/mach-db1x00/db1300.h @@ -0,0 +1,40 @@ +/* + * NetLogic DB1300 board constants + */ + +#ifndef _DB1300_H_ +#define _DB1300_H_ + +/* FPGA (external mux) interrupt sources */ +#define DB1300_FIRST_INT (ALCHEMY_GPIC_INT_LAST + 1) +#define DB1300_IDE_INT (DB1300_FIRST_INT + 0) +#define DB1300_ETH_INT (DB1300_FIRST_INT + 1) +#define DB1300_CF_INT (DB1300_FIRST_INT + 2) +#define DB1300_VIDEO_INT (DB1300_FIRST_INT + 4) +#define DB1300_HDMI_INT (DB1300_FIRST_INT + 5) +#define DB1300_DC_INT (DB1300_FIRST_INT + 6) +#define DB1300_FLASH_INT (DB1300_FIRST_INT + 7) +#define DB1300_CF_INSERT_INT (DB1300_FIRST_INT + 8) +#define DB1300_CF_EJECT_INT (DB1300_FIRST_INT + 9) +#define DB1300_AC97_INT (DB1300_FIRST_INT + 10) +#define DB1300_AC97_PEN_INT (DB1300_FIRST_INT + 11) +#define DB1300_SD1_INSERT_INT (DB1300_FIRST_INT + 12) +#define DB1300_SD1_EJECT_INT (DB1300_FIRST_INT + 13) +#define DB1300_OTG_VBUS_OC_INT (DB1300_FIRST_INT + 14) +#define DB1300_HOST_VBUS_OC_INT (DB1300_FIRST_INT + 15) +#define DB1300_LAST_INT (DB1300_FIRST_INT + 15) + +/* SMSC9210 CS */ +#define DB1300_ETH_PHYS_ADDR 0x19000000 +#define DB1300_ETH_PHYS_END 0x197fffff + +/* ATA CS */ +#define DB1300_IDE_PHYS_ADDR 0x18800000 +#define DB1300_IDE_REG_SHIFT 5 +#define DB1300_IDE_PHYS_LEN (16 << DB1300_IDE_REG_SHIFT) + +/* NAND CS */ +#define DB1300_NAND_PHYS_ADDR 0x20000000 +#define DB1300_NAND_PHYS_END 0x20000fff + +#endif /* _DB1300_H_ */ diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h deleted file mode 100644 index a5affb0568ef..000000000000 --- a/arch/mips/include/asm/mach-db1x00/db1x00.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * AMD Alchemy DBAu1x00 Reference Boards - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_DB1X00_H -#define __ASM_DB1X00_H - -#include <asm/mach-au1x00/au1xxx_psc.h> - -#ifdef CONFIG_MIPS_DB1550 - -#define DBDMA_AC97_TX_CHAN AU1550_DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN AU1550_DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN AU1550_DSCR_CMD0_PSC3_TX -#define DBDMA_I2S_RX_CHAN AU1550_DSCR_CMD0_PSC3_RX - -#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR -#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR -#define SMBUS_PSC_BASE AU1550_PSC2_PHYS_ADDR -#define I2S_PSC_BASE AU1550_PSC3_PHYS_ADDR - -#define NAND_PHYS_ADDR 0x20000000 - -#endif - -/* - * NAND defines - * - * Timing values as described in databook, * ns value stripped of the - * lower 2 bits. - * These defines are here rather than an Au1550 generic file because - * the parts chosen on another board may be different and may require - * different timings. - */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) - -/* Bitfield shift amounts */ -#define NAND_T_H_SHIFT 0 -#define NAND_T_PUL_SHIFT 4 -#define NAND_T_SU_SHIFT 8 -#define NAND_T_WH_SHIFT 12 - -#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) -#define NAND_CS 1 - -/* Should be done by YAMON */ -#define NAND_STCFG 0x00400005 /* 8-bit NAND */ -#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ -#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ - -#endif /* __ASM_DB1X00_H */ diff --git a/arch/mips/include/asm/mach-db1x00/irq.h b/arch/mips/include/asm/mach-db1x00/irq.h new file mode 100644 index 000000000000..15b26693238f --- /dev/null +++ b/arch/mips/include/asm/mach-db1x00/irq.h @@ -0,0 +1,23 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 by Ralf Baechle + */ +#ifndef __ASM_MACH_GENERIC_IRQ_H +#define __ASM_MACH_GENERIC_IRQ_H + + +#ifdef NR_IRQS +#undef NR_IRQS +#endif + +#ifndef MIPS_CPU_IRQ_BASE +#define MIPS_CPU_IRQ_BASE 0 +#endif + +/* 8 (MIPS) + 128 (au1300) + 16 (cpld) */ +#define NR_IRQS 152 + +#endif /* __ASM_MACH_GENERIC_IRQ_H */ diff --git a/arch/mips/include/asm/mach-generic/floppy.h b/arch/mips/include/asm/mach-generic/floppy.h index 001a8ce17c17..a38f4d43e5e5 100644 --- a/arch/mips/include/asm/mach-generic/floppy.h +++ b/arch/mips/include/asm/mach-generic/floppy.h @@ -98,7 +98,7 @@ static inline void fd_disable_irq(void) static inline int fd_request_irq(void) { return request_irq(FLOPPY_IRQ, floppy_interrupt, - IRQF_DISABLED, "floppy", NULL); + 0, "floppy", NULL); } static inline void fd_free_irq(void) diff --git a/arch/mips/include/asm/mach-jazz/floppy.h b/arch/mips/include/asm/mach-jazz/floppy.h index 56e9ca6ae426..88b5acb75145 100644 --- a/arch/mips/include/asm/mach-jazz/floppy.h +++ b/arch/mips/include/asm/mach-jazz/floppy.h @@ -90,7 +90,7 @@ static inline void fd_disable_irq(void) static inline int fd_request_irq(void) { return request_irq(FLOPPY_IRQ, floppy_interrupt, - IRQF_DISABLED, "floppy", NULL); + 0, "floppy", NULL); } static inline void fd_free_irq(void) diff --git a/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h index 3b728275b9b0..d193fb68cf27 100644 --- a/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h @@ -24,24 +24,33 @@ #define cpu_has_llsc 1 #define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases 0 -#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_ic_fills_f_dc 1 #define cpu_has_dsp 0 #define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 -#define cpu_icache_snoops_remote_store 0 +#define cpu_icache_snoops_remote_store 1 -#define cpu_has_nofpuex 0 #define cpu_has_64bits 1 #define cpu_has_mips32r1 1 -#define cpu_has_mips32r2 0 #define cpu_has_mips64r1 1 -#define cpu_has_mips64r2 0 #define cpu_has_inclusive_pcaches 0 #define cpu_dcache_line_size() 32 #define cpu_icache_line_size() 32 +#if defined(CONFIG_CPU_XLR) +#define cpu_has_userlocal 0 +#define cpu_has_dc_aliases 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r2 0 +#elif defined(CONFIG_CPU_XLP) +#define cpu_has_userlocal 1 +#define cpu_has_mips32r2 1 +#define cpu_has_mips64r2 1 +#define cpu_has_dc_aliases 1 +#else +#error "Unknown Netlogic CPU" +#endif + #endif /* __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h b/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h deleted file mode 100644 index 622c58710e5b..000000000000 --- a/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 2001, 03 by Ralf Baechle - * - * RTC routines for PC style attached Dallas chip. - */ -#ifndef __ASM_MACH_AU1XX_MC146818RTC_H -#define __ASM_MACH_AU1XX_MC146818RTC_H - -#include <asm/io.h> -#include <asm/mach-au1x00/au1000.h> - -#define RTC_PORT(x) (0x0c000000 + (x)) -#define RTC_IRQ 8 -#define PB1500_RTC_ADDR 0x0c000000 - -static inline unsigned char CMOS_READ(unsigned long offset) -{ - offset <<= 2; - return (u8)(au_readl(offset + PB1500_RTC_ADDR) & 0xff); -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long offset) -{ - offset <<= 2; - au_writel(data, offset + PB1500_RTC_ADDR); -} - -#define RTC_ALWAYS_BCD 1 - -#endif /* __ASM_MACH_AU1XX_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1000.h b/arch/mips/include/asm/mach-pb1x00/pb1000.h deleted file mode 100644 index 65059255dc1e..000000000000 --- a/arch/mips/include/asm/mach-pb1x00/pb1000.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Alchemy Semi Pb1000 Reference Board - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1000_H -#define __ASM_PB1000_H - -/* PCMCIA PB1000 specific defines */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -#define PB1000_PCR 0xBE000000 -# define PCR_SLOT_0_VPP0 (1 << 0) -# define PCR_SLOT_0_VPP1 (1 << 1) -# define PCR_SLOT_0_VCC0 (1 << 2) -# define PCR_SLOT_0_VCC1 (1 << 3) -# define PCR_SLOT_0_RST (1 << 4) -# define PCR_SLOT_1_VPP0 (1 << 8) -# define PCR_SLOT_1_VPP1 (1 << 9) -# define PCR_SLOT_1_VCC0 (1 << 10) -# define PCR_SLOT_1_VCC1 (1 << 11) -# define PCR_SLOT_1_RST (1 << 12) - -#define PB1000_MDR 0xBE000004 -# define MDR_PI (1 << 5) /* PCMCIA int latch */ -# define MDR_EPI (1 << 14) /* enable PCMCIA int */ -# define MDR_CPI (1 << 15) /* clear PCMCIA int */ - -#define PB1000_ACR1 0xBE000008 -# define ACR1_SLOT_0_CD1 (1 << 0) /* card detect 1 */ -# define ACR1_SLOT_0_CD2 (1 << 1) /* card detect 2 */ -# define ACR1_SLOT_0_READY (1 << 2) /* ready */ -# define ACR1_SLOT_0_STATUS (1 << 3) /* status change */ -# define ACR1_SLOT_0_VS1 (1 << 4) /* voltage sense 1 */ -# define ACR1_SLOT_0_VS2 (1 << 5) /* voltage sense 2 */ -# define ACR1_SLOT_0_INPACK (1 << 6) /* inpack pin status */ -# define ACR1_SLOT_1_CD1 (1 << 8) /* card detect 1 */ -# define ACR1_SLOT_1_CD2 (1 << 9) /* card detect 2 */ -# define ACR1_SLOT_1_READY (1 << 10) /* ready */ -# define ACR1_SLOT_1_STATUS (1 << 11) /* status change */ -# define ACR1_SLOT_1_VS1 (1 << 12) /* voltage sense 1 */ -# define ACR1_SLOT_1_VS2 (1 << 13) /* voltage sense 2 */ -# define ACR1_SLOT_1_INPACK (1 << 14) /* inpack pin status */ - -#define CPLD_AUX0 0xBE00000C -#define CPLD_AUX1 0xBE000010 -#define CPLD_AUX2 0xBE000014 - -/* Voltage levels */ - -/* VPPEN1 - VPPEN0 */ -#define VPP_GND ((0 << 1) | (0 << 0)) -#define VPP_5V ((1 << 1) | (0 << 0)) -#define VPP_3V ((0 << 1) | (1 << 0)) -#define VPP_12V ((0 << 1) | (1 << 0)) -#define VPP_HIZ ((1 << 1) | (1 << 0)) - -/* VCCEN1 - VCCEN0 */ -#define VCC_3V ((0 << 1) | (1 << 0)) -#define VCC_5V ((1 << 1) | (0 << 0)) -#define VCC_HIZ ((0 << 1) | (0 << 0)) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT) \ - ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) -#endif /* __ASM_PB1000_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h deleted file mode 100644 index 374416adb65b..000000000000 --- a/arch/mips/include/asm/mach-pb1x00/pb1200.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * AMD Alchemy Pb1200 Reference Board - * Board Registers defines. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1200_H -#define __ASM_PB1200_H - -#include <linux/types.h> -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-au1x00/au1xxx_psc.h> - -#define DBDMA_AC97_TX_CHAN AU1200_DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN AU1200_DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN AU1200_DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN AU1200_DSCR_CMD0_PSC1_RX - -/* - * SPI and SMB are muxed on the Pb1200 board. - * Refer to board documentation. - */ -#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR -#define SMBUS_PSC_BASE AU1550_PSC0_PHYS_ADDR -/* - * AC97 and I2S are muxed on the Pb1200 board. - * Refer to board documentation. - */ -#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR -#define I2S_PSC_BASE AU1550_PSC1_PHYS_ADDR - - -#define BCSR_SYSTEM_VDDI 0x001F -#define BCSR_SYSTEM_POWEROFF 0x4000 -#define BCSR_SYSTEM_RESET 0x8000 - -/* Bit positions for the different interrupt sources */ -#define BCSR_INT_IDE 0x0001 -#define BCSR_INT_ETH 0x0002 -#define BCSR_INT_PC0 0x0004 -#define BCSR_INT_PC0STSCHG 0x0008 -#define BCSR_INT_PC1 0x0010 -#define BCSR_INT_PC1STSCHG 0x0020 -#define BCSR_INT_DC 0x0040 -#define BCSR_INT_FLASHBUSY 0x0080 -#define BCSR_INT_PC0INSERT 0x0100 -#define BCSR_INT_PC0EJECT 0x0200 -#define BCSR_INT_PC1INSERT 0x0400 -#define BCSR_INT_PC1EJECT 0x0800 -#define BCSR_INT_SD0INSERT 0x1000 -#define BCSR_INT_SD0EJECT 0x2000 -#define BCSR_INT_SD1INSERT 0x4000 -#define BCSR_INT_SD1EJECT 0x8000 - -#define SMC91C111_PHYS_ADDR 0x0D000300 -#define SMC91C111_INT PB1200_ETH_INT - -#define IDE_PHYS_ADDR 0x0C800000 -#define IDE_REG_SHIFT 5 -#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT) -#define IDE_INT PB1200_IDE_INT - -#define NAND_PHYS_ADDR 0x1C000000 - -/* - * Timing values as described in databook, * ns value stripped of - * lower 2 bits. - * These defines are here rather than an Au1200 generic file because - * the parts chosen on another board may be different and may require - * different timings. - */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) - -/* Bitfield shift amounts */ -#define NAND_T_H_SHIFT 0 -#define NAND_T_PUL_SHIFT 4 -#define NAND_T_SU_SHIFT 8 -#define NAND_T_WH_SHIFT 12 - -#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) - -/* - * External Interrupts for Pb1200 as of 8/6/2004. - * Bit positions in the CPLD registers can be calculated by taking - * the interrupt define and subtracting the PB1200_INT_BEGIN value. - * - * Example: IDE bis pos is = 64 - 64 - * ETH bit pos is = 65 - 64 - */ -enum external_pb1200_ints { - PB1200_INT_BEGIN = AU1000_MAX_INTR + 1, - - PB1200_IDE_INT = PB1200_INT_BEGIN, - PB1200_ETH_INT, - PB1200_PC0_INT, - PB1200_PC0_STSCHG_INT, - PB1200_PC1_INT, - PB1200_PC1_STSCHG_INT, - PB1200_DC_INT, - PB1200_FLASHBUSY_INT, - PB1200_PC0_INSERT_INT, - PB1200_PC0_EJECT_INT, - PB1200_PC1_INSERT_INT, - PB1200_PC1_EJECT_INT, - PB1200_SD0_INSERT_INT, - PB1200_SD0_EJECT_INT, - PB1200_SD1_INSERT_INT, - PB1200_SD1_EJECT_INT, - - PB1200_INT_END = PB1200_INT_BEGIN + 15 -}; - -/* NAND chip select */ -#define NAND_CS 1 - -#endif /* __ASM_PB1200_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h deleted file mode 100644 index 443b88adebf1..000000000000 --- a/arch/mips/include/asm/mach-pb1x00/pb1550.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * AMD Alchemy Semi PB1550 Reference Board - * Board Registers defines. - * - * Copyright 2004 Embedded Edge LLC. - * Copyright 2005 Ralf Baechle (ralf@linux-mips.org) - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1550_H -#define __ASM_PB1550_H - -#include <linux/types.h> -#include <asm/mach-au1x00/au1xxx_psc.h> - -#define DBDMA_AC97_TX_CHAN AU1550_DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN AU1550_DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN AU1550_DSCR_CMD0_PSC3_TX -#define DBDMA_I2S_RX_CHAN AU1550_DSCR_CMD0_PSC3_RX - -#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR -#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR -#define SMBUS_PSC_BASE AU1550_PSC2_PHYS_ADDR -#define I2S_PSC_BASE AU1550_PSC3_PHYS_ADDR - -/* - * Timing values as described in databook, * ns value stripped of - * lower 2 bits. - * These defines are here rather than an SOC1550 generic file because - * the parts chosen on another board may be different and may require - * different timings. - */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) - -/* Bitfield shift amounts */ -#define NAND_T_H_SHIFT 0 -#define NAND_T_PUL_SHIFT 4 -#define NAND_T_SU_SHIFT 8 -#define NAND_T_WH_SHIFT 12 - -#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) - -#define NAND_CS 1 - -/* Should be done by YAMON */ -#define NAND_STCFG 0x00400005 /* 8-bit NAND */ -#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ -#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ - -#endif /* __ASM_PB1550_H */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 2ea7b817feb8..7f87d824eeb0 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1106,7 +1106,7 @@ do { \ #define read_c0_brcm_reset() __read_32bit_c0_register($22, 5) #define write_c0_brcm_reset(val) __write_32bit_c0_register($22, 5, val) -/* BMIPS4380 */ +/* BMIPS43xx */ #define read_c0_brcm_cmt_intr() __read_32bit_c0_register($22, 1) #define write_c0_brcm_cmt_intr(val) __write_32bit_c0_register($22, 1, val) @@ -1667,6 +1667,13 @@ __BUILD_SET_C0(config) __BUILD_SET_C0(intcontrol) __BUILD_SET_C0(intctl) __BUILD_SET_C0(srsmap) +__BUILD_SET_C0(brcm_config_0) +__BUILD_SET_C0(brcm_bus_pll) +__BUILD_SET_C0(brcm_reset) +__BUILD_SET_C0(brcm_cmt_intr) +__BUILD_SET_C0(brcm_cmt_ctrl) +__BUILD_SET_C0(brcm_config) +__BUILD_SET_C0(brcm_mode) #endif /* !__ASSEMBLY__ */ diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h index bc01a02cacd8..7467d1d933d5 100644 --- a/arch/mips/include/asm/module.h +++ b/arch/mips/include/asm/module.h @@ -74,7 +74,9 @@ search_module_dbetables(unsigned long addr) } #endif -#ifdef CONFIG_CPU_MIPS32_R1 +#ifdef CONFIG_CPU_BMIPS +#define MODULE_PROC_FAMILY "BMIPS " +#elif defined CONFIG_CPU_MIPS32_R1 #define MODULE_PROC_FAMILY "MIPS32_R1 " #elif defined CONFIG_CPU_MIPS32_R2 #define MODULE_PROC_FAMILY "MIPS32_R2 " @@ -120,6 +122,8 @@ search_module_dbetables(unsigned long addr) #define MODULE_PROC_FAMILY "OCTEON " #elif defined CONFIG_CPU_XLR #define MODULE_PROC_FAMILY "XLR " +#elif defined CONFIG_CPU_XLP +#define MODULE_PROC_FAMILY "XLP " #else #error MODULE_PROC_FAMILY undefined for your processor configuration #endif diff --git a/arch/mips/include/asm/netlogic/common.h b/arch/mips/include/asm/netlogic/common.h new file mode 100644 index 000000000000..fdd2f44c7b59 --- /dev/null +++ b/arch/mips/include/asm/netlogic/common.h @@ -0,0 +1,76 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _NETLOGIC_COMMON_H_ +#define _NETLOGIC_COMMON_H_ + +/* + * Common SMP definitions + */ +#define RESET_VEC_PHYS 0x1fc00000 +#define RESET_DATA_PHYS (RESET_VEC_PHYS + (1<<10)) +#define BOOT_THREAD_MODE 0 +#define BOOT_NMI_LOCK 4 +#define BOOT_NMI_HANDLER 8 + +#ifndef __ASSEMBLY__ +struct irq_desc; +extern struct plat_smp_ops nlm_smp_ops; +extern char nlm_reset_entry[], nlm_reset_entry_end[]; +void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc); +void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc); +void nlm_smp_irq_init(void); +void nlm_boot_secondary_cpus(void); +int nlm_wakeup_secondary_cpus(u32 wakeup_mask); +void nlm_rmiboot_preboot(void); + +static inline void +nlm_set_nmi_handler(void *handler) +{ + char *reset_data; + + reset_data = (char *)CKSEG1ADDR(RESET_DATA_PHYS); + *(int64_t *)(reset_data + BOOT_NMI_HANDLER) = (long)handler; +} + +/* + * Misc. + */ +unsigned int nlm_get_cpu_frequency(void); + +extern unsigned long nlm_common_ebase; +extern int nlm_threads_per_core; +extern uint32_t nlm_cpumask, nlm_coremask; +#endif +#endif /* _NETLOGIC_COMMON_H_ */ diff --git a/arch/mips/include/asm/netlogic/haldefs.h b/arch/mips/include/asm/netlogic/haldefs.h new file mode 100644 index 000000000000..72a0c788b472 --- /dev/null +++ b/arch/mips/include/asm/netlogic/haldefs.h @@ -0,0 +1,163 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __NLM_HAL_HALDEFS_H__ +#define __NLM_HAL_HALDEFS_H__ + +/* + * This file contains platform specific memory mapped IO implementation + * and will provide a way to read 32/64 bit memory mapped registers in + * all ABIs + */ +#if !defined(CONFIG_64BIT) && defined(CONFIG_CPU_XLP) +#error "o32 compile not supported on XLP yet" +#endif +/* + * For o32 compilation, we have to disable interrupts and enable KX bit to + * access 64 bit addresses or data. + * + * We need to disable interrupts because we save just the lower 32 bits of + * registers in interrupt handling. So if we get hit by an interrupt while + * using the upper 32 bits of a register, we lose. + */ +static inline uint32_t nlm_save_flags_kx(void) +{ + return change_c0_status(ST0_KX | ST0_IE, ST0_KX); +} + +static inline uint32_t nlm_save_flags_cop2(void) +{ + return change_c0_status(ST0_CU2 | ST0_IE, ST0_CU2); +} + +static inline void nlm_restore_flags(uint32_t sr) +{ + write_c0_status(sr); +} + +/* + * The n64 implementations are simple, the o32 implementations when they + * are added, will have to disable interrupts and enable KX before doing + * 64 bit ops. + */ +static inline uint32_t +nlm_read_reg(uint64_t base, uint32_t reg) +{ + volatile uint32_t *addr = (volatile uint32_t *)(long)base + reg; + + return *addr; +} + +static inline void +nlm_write_reg(uint64_t base, uint32_t reg, uint32_t val) +{ + volatile uint32_t *addr = (volatile uint32_t *)(long)base + reg; + + *addr = val; +} + +static inline uint64_t +nlm_read_reg64(uint64_t base, uint32_t reg) +{ + uint64_t addr = base + (reg >> 1) * sizeof(uint64_t); + volatile uint64_t *ptr = (volatile uint64_t *)(long)addr; + + return *ptr; +} + +static inline void +nlm_write_reg64(uint64_t base, uint32_t reg, uint64_t val) +{ + uint64_t addr = base + (reg >> 1) * sizeof(uint64_t); + volatile uint64_t *ptr = (volatile uint64_t *)(long)addr; + + *ptr = val; +} + +/* + * Routines to store 32/64 bit values to 64 bit addresses, + * used when going thru XKPHYS to access registers + */ +static inline uint32_t +nlm_read_reg_xkphys(uint64_t base, uint32_t reg) +{ + return nlm_read_reg(base, reg); +} + +static inline void +nlm_write_reg_xkphys(uint64_t base, uint32_t reg, uint32_t val) +{ + nlm_write_reg(base, reg, val); +} + +static inline uint64_t +nlm_read_reg64_xkphys(uint64_t base, uint32_t reg) +{ + return nlm_read_reg64(base, reg); +} + +static inline void +nlm_write_reg64_xkphys(uint64_t base, uint32_t reg, uint64_t val) +{ + nlm_write_reg64(base, reg, val); +} + +/* Location where IO base is mapped */ +extern uint64_t nlm_io_base; + +#if defined(CONFIG_CPU_XLP) +static inline uint64_t +nlm_pcicfg_base(uint32_t devoffset) +{ + return nlm_io_base + devoffset; +} + +static inline uint64_t +nlm_xkphys_map_pcibar0(uint64_t pcibase) +{ + uint64_t paddr; + + paddr = nlm_read_reg(pcibase, 0x4) & ~0xfu; + return (uint64_t)0x9000000000000000 | paddr; +} +#elif defined(CONFIG_CPU_XLR) + +static inline uint64_t +nlm_mmio_base(uint32_t devoffset) +{ + return nlm_io_base + devoffset; +} +#endif + +#endif diff --git a/arch/mips/include/asm/netlogic/xlp-hal/bridge.h b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h new file mode 100644 index 000000000000..ca95133f1ad1 --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h @@ -0,0 +1,187 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __NLM_HAL_BRIDGE_H__ +#define __NLM_HAL_BRIDGE_H__ + +/** +* @file_name mio.h +* @author Netlogic Microsystems +* @brief Basic definitions of XLP memory and io subsystem +*/ + +/* + * BRIDGE specific registers + * + * These registers start after the PCIe header, which has 0x40 + * standard entries + */ +#define BRIDGE_MODE 0x00 +#define BRIDGE_PCI_CFG_BASE 0x01 +#define BRIDGE_PCI_CFG_LIMIT 0x02 +#define BRIDGE_PCIE_CFG_BASE 0x03 +#define BRIDGE_PCIE_CFG_LIMIT 0x04 +#define BRIDGE_BUSNUM_BAR0 0x05 +#define BRIDGE_BUSNUM_BAR1 0x06 +#define BRIDGE_BUSNUM_BAR2 0x07 +#define BRIDGE_BUSNUM_BAR3 0x08 +#define BRIDGE_BUSNUM_BAR4 0x09 +#define BRIDGE_BUSNUM_BAR5 0x0a +#define BRIDGE_BUSNUM_BAR6 0x0b +#define BRIDGE_FLASH_BAR0 0x0c +#define BRIDGE_FLASH_BAR1 0x0d +#define BRIDGE_FLASH_BAR2 0x0e +#define BRIDGE_FLASH_BAR3 0x0f +#define BRIDGE_FLASH_LIMIT0 0x10 +#define BRIDGE_FLASH_LIMIT1 0x11 +#define BRIDGE_FLASH_LIMIT2 0x12 +#define BRIDGE_FLASH_LIMIT3 0x13 + +#define BRIDGE_DRAM_BAR(i) (0x14 + (i)) +#define BRIDGE_DRAM_BAR0 0x14 +#define BRIDGE_DRAM_BAR1 0x15 +#define BRIDGE_DRAM_BAR2 0x16 +#define BRIDGE_DRAM_BAR3 0x17 +#define BRIDGE_DRAM_BAR4 0x18 +#define BRIDGE_DRAM_BAR5 0x19 +#define BRIDGE_DRAM_BAR6 0x1a +#define BRIDGE_DRAM_BAR7 0x1b + +#define BRIDGE_DRAM_LIMIT(i) (0x1c + (i)) +#define BRIDGE_DRAM_LIMIT0 0x1c +#define BRIDGE_DRAM_LIMIT1 0x1d +#define BRIDGE_DRAM_LIMIT2 0x1e +#define BRIDGE_DRAM_LIMIT3 0x1f +#define BRIDGE_DRAM_LIMIT4 0x20 +#define BRIDGE_DRAM_LIMIT5 0x21 +#define BRIDGE_DRAM_LIMIT6 0x22 +#define BRIDGE_DRAM_LIMIT7 0x23 + +#define BRIDGE_DRAM_NODE_TRANSLN0 0x24 +#define BRIDGE_DRAM_NODE_TRANSLN1 0x25 +#define BRIDGE_DRAM_NODE_TRANSLN2 0x26 +#define BRIDGE_DRAM_NODE_TRANSLN3 0x27 +#define BRIDGE_DRAM_NODE_TRANSLN4 0x28 +#define BRIDGE_DRAM_NODE_TRANSLN5 0x29 +#define BRIDGE_DRAM_NODE_TRANSLN6 0x2a +#define BRIDGE_DRAM_NODE_TRANSLN7 0x2b +#define BRIDGE_DRAM_CHNL_TRANSLN0 0x2c +#define BRIDGE_DRAM_CHNL_TRANSLN1 0x2d +#define BRIDGE_DRAM_CHNL_TRANSLN2 0x2e +#define BRIDGE_DRAM_CHNL_TRANSLN3 0x2f +#define BRIDGE_DRAM_CHNL_TRANSLN4 0x30 +#define BRIDGE_DRAM_CHNL_TRANSLN5 0x31 +#define BRIDGE_DRAM_CHNL_TRANSLN6 0x32 +#define BRIDGE_DRAM_CHNL_TRANSLN7 0x33 +#define BRIDGE_PCIEMEM_BASE0 0x34 +#define BRIDGE_PCIEMEM_BASE1 0x35 +#define BRIDGE_PCIEMEM_BASE2 0x36 +#define BRIDGE_PCIEMEM_BASE3 0x37 +#define BRIDGE_PCIEMEM_LIMIT0 0x38 +#define BRIDGE_PCIEMEM_LIMIT1 0x39 +#define BRIDGE_PCIEMEM_LIMIT2 0x3a +#define BRIDGE_PCIEMEM_LIMIT3 0x3b +#define BRIDGE_PCIEIO_BASE0 0x3c +#define BRIDGE_PCIEIO_BASE1 0x3d +#define BRIDGE_PCIEIO_BASE2 0x3e +#define BRIDGE_PCIEIO_BASE3 0x3f +#define BRIDGE_PCIEIO_LIMIT0 0x40 +#define BRIDGE_PCIEIO_LIMIT1 0x41 +#define BRIDGE_PCIEIO_LIMIT2 0x42 +#define BRIDGE_PCIEIO_LIMIT3 0x43 +#define BRIDGE_PCIEMEM_BASE4 0x44 +#define BRIDGE_PCIEMEM_BASE5 0x45 +#define BRIDGE_PCIEMEM_BASE6 0x46 +#define BRIDGE_PCIEMEM_LIMIT4 0x47 +#define BRIDGE_PCIEMEM_LIMIT5 0x48 +#define BRIDGE_PCIEMEM_LIMIT6 0x49 +#define BRIDGE_PCIEIO_BASE4 0x4a +#define BRIDGE_PCIEIO_BASE5 0x4b +#define BRIDGE_PCIEIO_BASE6 0x4c +#define BRIDGE_PCIEIO_LIMIT4 0x4d +#define BRIDGE_PCIEIO_LIMIT5 0x4e +#define BRIDGE_PCIEIO_LIMIT6 0x4f +#define BRIDGE_NBU_EVENT_CNT_CTL 0x50 +#define BRIDGE_EVNTCTR1_LOW 0x51 +#define BRIDGE_EVNTCTR1_HI 0x52 +#define BRIDGE_EVNT_CNT_CTL2 0x53 +#define BRIDGE_EVNTCTR2_LOW 0x54 +#define BRIDGE_EVNTCTR2_HI 0x55 +#define BRIDGE_TRACEBUF_MATCH0 0x56 +#define BRIDGE_TRACEBUF_MATCH1 0x57 +#define BRIDGE_TRACEBUF_MATCH_LOW 0x58 +#define BRIDGE_TRACEBUF_MATCH_HI 0x59 +#define BRIDGE_TRACEBUF_CTRL 0x5a +#define BRIDGE_TRACEBUF_INIT 0x5b +#define BRIDGE_TRACEBUF_ACCESS 0x5c +#define BRIDGE_TRACEBUF_READ_DATA0 0x5d +#define BRIDGE_TRACEBUF_READ_DATA1 0x5d +#define BRIDGE_TRACEBUF_READ_DATA2 0x5f +#define BRIDGE_TRACEBUF_READ_DATA3 0x60 +#define BRIDGE_TRACEBUF_STATUS 0x61 +#define BRIDGE_ADDRESS_ERROR0 0x62 +#define BRIDGE_ADDRESS_ERROR1 0x63 +#define BRIDGE_ADDRESS_ERROR2 0x64 +#define BRIDGE_TAG_ECC_ADDR_ERROR0 0x65 +#define BRIDGE_TAG_ECC_ADDR_ERROR1 0x66 +#define BRIDGE_TAG_ECC_ADDR_ERROR2 0x67 +#define BRIDGE_LINE_FLUSH0 0x68 +#define BRIDGE_LINE_FLUSH1 0x69 +#define BRIDGE_NODE_ID 0x6a +#define BRIDGE_ERROR_INTERRUPT_EN 0x6b +#define BRIDGE_PCIE0_WEIGHT 0x2c0 +#define BRIDGE_PCIE1_WEIGHT 0x2c1 +#define BRIDGE_PCIE2_WEIGHT 0x2c2 +#define BRIDGE_PCIE3_WEIGHT 0x2c3 +#define BRIDGE_USB_WEIGHT 0x2c4 +#define BRIDGE_NET_WEIGHT 0x2c5 +#define BRIDGE_POE_WEIGHT 0x2c6 +#define BRIDGE_CMS_WEIGHT 0x2c7 +#define BRIDGE_DMAENG_WEIGHT 0x2c8 +#define BRIDGE_SEC_WEIGHT 0x2c9 +#define BRIDGE_COMP_WEIGHT 0x2ca +#define BRIDGE_GIO_WEIGHT 0x2cb +#define BRIDGE_FLASH_WEIGHT 0x2cc + +#ifndef __ASSEMBLY__ + +#define nlm_read_bridge_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_bridge_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_get_bridge_pcibase(node) \ + nlm_pcicfg_base(XLP_IO_BRIDGE_OFFSET(node)) +#define nlm_get_bridge_regbase(node) \ + (nlm_get_bridge_pcibase(node) + XLP_IO_PCI_HDRSZ) + +#endif /* __ASSEMBLY__ */ +#endif /* __NLM_HAL_BRIDGE_H__ */ diff --git a/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h b/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h new file mode 100644 index 000000000000..bf7d41deb9be --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h @@ -0,0 +1,83 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __NLM_HAL_CPUCONTROL_H__ +#define __NLM_HAL_CPUCONTROL_H__ + +#define CPU_BLOCKID_IFU 0 +#define CPU_BLOCKID_ICU 1 +#define CPU_BLOCKID_IEU 2 +#define CPU_BLOCKID_LSU 3 +#define CPU_BLOCKID_MMU 4 +#define CPU_BLOCKID_PRF 5 +#define CPU_BLOCKID_SCH 7 +#define CPU_BLOCKID_SCU 8 +#define CPU_BLOCKID_FPU 9 +#define CPU_BLOCKID_MAP 10 + +#define LSU_DEFEATURE 0x304 +#define LSU_CERRLOG_REGID 0x09 +#define SCHED_DEFEATURE 0x700 + +/* Offsets of interest from the 'MAP' Block */ +#define MAP_THREADMODE 0x00 +#define MAP_EXT_EBASE_ENABLE 0x04 +#define MAP_CCDI_CONFIG 0x08 +#define MAP_THRD0_CCDI_STATUS 0x0c +#define MAP_THRD1_CCDI_STATUS 0x10 +#define MAP_THRD2_CCDI_STATUS 0x14 +#define MAP_THRD3_CCDI_STATUS 0x18 +#define MAP_THRD0_DEBUG_MODE 0x1c +#define MAP_THRD1_DEBUG_MODE 0x20 +#define MAP_THRD2_DEBUG_MODE 0x24 +#define MAP_THRD3_DEBUG_MODE 0x28 +#define MAP_MISC_STATE 0x60 +#define MAP_DEBUG_READ_CTL 0x64 +#define MAP_DEBUG_READ_REG0 0x68 +#define MAP_DEBUG_READ_REG1 0x6c + +#define MMU_SETUP 0x400 +#define MMU_LFSRSEED 0x401 +#define MMU_HPW_NUM_PAGE_LVL 0x410 +#define MMU_PGWKR_PGDBASE 0x411 +#define MMU_PGWKR_PGDSHFT 0x412 +#define MMU_PGWKR_PGDMASK 0x413 +#define MMU_PGWKR_PUDSHFT 0x414 +#define MMU_PGWKR_PUDMASK 0x415 +#define MMU_PGWKR_PMDSHFT 0x416 +#define MMU_PGWKR_PMDMASK 0x417 +#define MMU_PGWKR_PTESHFT 0x418 +#define MMU_PGWKR_PTEMASK 0x419 + +#endif /* __NLM_CPUCONTROL_H__ */ diff --git a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h new file mode 100644 index 000000000000..86cc3391e50c --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h @@ -0,0 +1,153 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __NLM_HAL_IOMAP_H__ +#define __NLM_HAL_IOMAP_H__ + +#define XLP_DEFAULT_IO_BASE 0x18000000 +#define NMI_BASE 0xbfc00000 +#define XLP_IO_CLK 133333333 + +#define XLP_PCIE_CFG_SIZE 0x1000 /* 4K */ +#define XLP_PCIE_DEV_BLK_SIZE (8 * XLP_PCIE_CFG_SIZE) +#define XLP_PCIE_BUS_BLK_SIZE (256 * XLP_PCIE_DEV_BLK_SIZE) +#define XLP_IO_SIZE (64 << 20) /* ECFG space size */ +#define XLP_IO_PCI_HDRSZ 0x100 +#define XLP_IO_DEV(node, dev) ((dev) + (node) * 8) +#define XLP_HDR_OFFSET(node, bus, dev, fn) (((bus) << 20) | \ + ((XLP_IO_DEV(node, dev)) << 15) | ((fn) << 12)) + +#define XLP_IO_BRIDGE_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 0) +/* coherent inter chip */ +#define XLP_IO_CIC0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 1) +#define XLP_IO_CIC1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 2) +#define XLP_IO_CIC2_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 3) +#define XLP_IO_PIC_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 4) + +#define XLP_IO_PCIE_OFFSET(node, i) XLP_HDR_OFFSET(node, 0, 1, i) +#define XLP_IO_PCIE0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 1, 0) +#define XLP_IO_PCIE1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 1, 1) +#define XLP_IO_PCIE2_OFFSET(node) XLP_HDR_OFFSET(node, 0, 1, 2) +#define XLP_IO_PCIE3_OFFSET(node) XLP_HDR_OFFSET(node, 0, 1, 3) + +#define XLP_IO_USB_OFFSET(node, i) XLP_HDR_OFFSET(node, 0, 2, i) +#define XLP_IO_USB_EHCI0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 0) +#define XLP_IO_USB_OHCI0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 1) +#define XLP_IO_USB_OHCI1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 2) +#define XLP_IO_USB_EHCI1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 3) +#define XLP_IO_USB_OHCI2_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 4) +#define XLP_IO_USB_OHCI3_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 5) + +#define XLP_IO_NAE_OFFSET(node) XLP_HDR_OFFSET(node, 0, 3, 0) +#define XLP_IO_POE_OFFSET(node) XLP_HDR_OFFSET(node, 0, 3, 1) + +#define XLP_IO_CMS_OFFSET(node) XLP_HDR_OFFSET(node, 0, 4, 0) + +#define XLP_IO_DMA_OFFSET(node) XLP_HDR_OFFSET(node, 0, 5, 1) +#define XLP_IO_SEC_OFFSET(node) XLP_HDR_OFFSET(node, 0, 5, 2) +#define XLP_IO_CMP_OFFSET(node) XLP_HDR_OFFSET(node, 0, 5, 3) + +#define XLP_IO_UART_OFFSET(node, i) XLP_HDR_OFFSET(node, 0, 6, i) +#define XLP_IO_UART0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 0) +#define XLP_IO_UART1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 1) +#define XLP_IO_I2C_OFFSET(node, i) XLP_HDR_OFFSET(node, 0, 6, 2 + i) +#define XLP_IO_I2C0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 2) +#define XLP_IO_I2C1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 3) +#define XLP_IO_GPIO_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 4) +/* system management */ +#define XLP_IO_SYS_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 5) +#define XLP_IO_JTAG_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 6) + +#define XLP_IO_NOR_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 0) +#define XLP_IO_NAND_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 1) +#define XLP_IO_SPI_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 2) +/* SD flash */ +#define XLP_IO_SD_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 3) +#define XLP_IO_MMC_OFFSET(node, slot) \ + ((XLP_IO_SD_OFFSET(node))+(slot*0x100)+XLP_IO_PCI_HDRSZ) + +/* PCI config header register id's */ +#define XLP_PCI_CFGREG0 0x00 +#define XLP_PCI_CFGREG1 0x01 +#define XLP_PCI_CFGREG2 0x02 +#define XLP_PCI_CFGREG3 0x03 +#define XLP_PCI_CFGREG4 0x04 +#define XLP_PCI_CFGREG5 0x05 +#define XLP_PCI_DEVINFO_REG0 0x30 +#define XLP_PCI_DEVINFO_REG1 0x31 +#define XLP_PCI_DEVINFO_REG2 0x32 +#define XLP_PCI_DEVINFO_REG3 0x33 +#define XLP_PCI_DEVINFO_REG4 0x34 +#define XLP_PCI_DEVINFO_REG5 0x35 +#define XLP_PCI_DEVINFO_REG6 0x36 +#define XLP_PCI_DEVINFO_REG7 0x37 +#define XLP_PCI_DEVSCRATCH_REG0 0x38 +#define XLP_PCI_DEVSCRATCH_REG1 0x39 +#define XLP_PCI_DEVSCRATCH_REG2 0x3a +#define XLP_PCI_DEVSCRATCH_REG3 0x3b +#define XLP_PCI_MSGSTN_REG 0x3c +#define XLP_PCI_IRTINFO_REG 0x3d +#define XLP_PCI_UCODEINFO_REG 0x3e +#define XLP_PCI_SBB_WT_REG 0x3f + +/* PCI IDs for SoC device */ +#define PCI_VENDOR_NETLOGIC 0x184e + +#define PCI_DEVICE_ID_NLM_ROOT 0x1001 +#define PCI_DEVICE_ID_NLM_ICI 0x1002 +#define PCI_DEVICE_ID_NLM_PIC 0x1003 +#define PCI_DEVICE_ID_NLM_PCIE 0x1004 +#define PCI_DEVICE_ID_NLM_EHCI 0x1007 +#define PCI_DEVICE_ID_NLM_ILK 0x1008 +#define PCI_DEVICE_ID_NLM_NAE 0x1009 +#define PCI_DEVICE_ID_NLM_POE 0x100A +#define PCI_DEVICE_ID_NLM_FMN 0x100B +#define PCI_DEVICE_ID_NLM_RAID 0x100D +#define PCI_DEVICE_ID_NLM_SAE 0x100D +#define PCI_DEVICE_ID_NLM_RSA 0x100E +#define PCI_DEVICE_ID_NLM_CMP 0x100F +#define PCI_DEVICE_ID_NLM_UART 0x1010 +#define PCI_DEVICE_ID_NLM_I2C 0x1011 +#define PCI_DEVICE_ID_NLM_NOR 0x1015 +#define PCI_DEVICE_ID_NLM_NAND 0x1016 +#define PCI_DEVICE_ID_NLM_MMC 0x1018 + +#ifndef __ASSEMBLY__ + +#define nlm_read_pci_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_pci_reg(b, r, v) nlm_write_reg(b, r, v) + +#endif /* !__ASSEMBLY */ + +#endif /* __NLM_HAL_IOMAP_H__ */ diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pic.h b/arch/mips/include/asm/netlogic/xlp-hal/pic.h new file mode 100644 index 000000000000..b6628f7ccf74 --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlp-hal/pic.h @@ -0,0 +1,411 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _NLM_HAL_PIC_H +#define _NLM_HAL_PIC_H + +/* PIC Specific registers */ +#define PIC_CTRL 0x00 + +/* PIC control register defines */ +#define PIC_CTRL_ITV 32 /* interrupt timeout value */ +#define PIC_CTRL_ICI 19 /* ICI interrupt timeout enable */ +#define PIC_CTRL_ITE 18 /* interrupt timeout enable */ +#define PIC_CTRL_STE 10 /* system timer interrupt enable */ +#define PIC_CTRL_WWR1 8 /* watchdog 1 wraparound count for reset */ +#define PIC_CTRL_WWR0 6 /* watchdog 0 wraparound count for reset */ +#define PIC_CTRL_WWN1 4 /* watchdog 1 wraparound count for NMI */ +#define PIC_CTRL_WWN0 2 /* watchdog 0 wraparound count for NMI */ +#define PIC_CTRL_WTE 0 /* watchdog timer enable */ + +/* PIC Status register defines */ +#define PIC_ICI_STATUS 33 /* ICI interrupt timeout status */ +#define PIC_ITE_STATUS 32 /* interrupt timeout status */ +#define PIC_STS_STATUS 4 /* System timer interrupt status */ +#define PIC_WNS_STATUS 2 /* NMI status for watchdog timers */ +#define PIC_WIS_STATUS 0 /* Interrupt status for watchdog timers */ + +/* PIC IPI control register offsets */ +#define PIC_IPICTRL_NMI 32 +#define PIC_IPICTRL_RIV 20 /* received interrupt vector */ +#define PIC_IPICTRL_IDB 16 /* interrupt destination base */ +#define PIC_IPICTRL_DTE 0 /* interrupt destination thread enables */ + +/* PIC IRT register offsets */ +#define PIC_IRT_ENABLE 31 +#define PIC_IRT_NMI 29 +#define PIC_IRT_SCH 28 /* Scheduling scheme */ +#define PIC_IRT_RVEC 20 /* Interrupt receive vectors */ +#define PIC_IRT_DT 19 /* Destination type */ +#define PIC_IRT_DB 16 /* Destination base */ +#define PIC_IRT_DTE 0 /* Destination thread enables */ + +#define PIC_BYTESWAP 0x02 +#define PIC_STATUS 0x04 +#define PIC_INTR_TIMEOUT 0x06 +#define PIC_ICI0_INTR_TIMEOUT 0x08 +#define PIC_ICI1_INTR_TIMEOUT 0x0a +#define PIC_ICI2_INTR_TIMEOUT 0x0c +#define PIC_IPI_CTL 0x0e +#define PIC_INT_ACK 0x10 +#define PIC_INT_PENDING0 0x12 +#define PIC_INT_PENDING1 0x14 +#define PIC_INT_PENDING2 0x16 + +#define PIC_WDOG0_MAXVAL 0x18 +#define PIC_WDOG0_COUNT 0x1a +#define PIC_WDOG0_ENABLE0 0x1c +#define PIC_WDOG0_ENABLE1 0x1e +#define PIC_WDOG0_BEATCMD 0x20 +#define PIC_WDOG0_BEAT0 0x22 +#define PIC_WDOG0_BEAT1 0x24 + +#define PIC_WDOG1_MAXVAL 0x26 +#define PIC_WDOG1_COUNT 0x28 +#define PIC_WDOG1_ENABLE0 0x2a +#define PIC_WDOG1_ENABLE1 0x2c +#define PIC_WDOG1_BEATCMD 0x2e +#define PIC_WDOG1_BEAT0 0x30 +#define PIC_WDOG1_BEAT1 0x32 + +#define PIC_WDOG_MAXVAL(i) (PIC_WDOG0_MAXVAL + ((i) ? 7 : 0)) +#define PIC_WDOG_COUNT(i) (PIC_WDOG0_COUNT + ((i) ? 7 : 0)) +#define PIC_WDOG_ENABLE0(i) (PIC_WDOG0_ENABLE0 + ((i) ? 7 : 0)) +#define PIC_WDOG_ENABLE1(i) (PIC_WDOG0_ENABLE1 + ((i) ? 7 : 0)) +#define PIC_WDOG_BEATCMD(i) (PIC_WDOG0_BEATCMD + ((i) ? 7 : 0)) +#define PIC_WDOG_BEAT0(i) (PIC_WDOG0_BEAT0 + ((i) ? 7 : 0)) +#define PIC_WDOG_BEAT1(i) (PIC_WDOG0_BEAT1 + ((i) ? 7 : 0)) + +#define PIC_TIMER0_MAXVAL 0x34 +#define PIC_TIMER1_MAXVAL 0x36 +#define PIC_TIMER2_MAXVAL 0x38 +#define PIC_TIMER3_MAXVAL 0x3a +#define PIC_TIMER4_MAXVAL 0x3c +#define PIC_TIMER5_MAXVAL 0x3e +#define PIC_TIMER6_MAXVAL 0x40 +#define PIC_TIMER7_MAXVAL 0x42 +#define PIC_TIMER_MAXVAL(i) (PIC_TIMER0_MAXVAL + ((i) * 2)) + +#define PIC_TIMER0_COUNT 0x44 +#define PIC_TIMER1_COUNT 0x46 +#define PIC_TIMER2_COUNT 0x48 +#define PIC_TIMER3_COUNT 0x4a +#define PIC_TIMER4_COUNT 0x4c +#define PIC_TIMER5_COUNT 0x4e +#define PIC_TIMER6_COUNT 0x50 +#define PIC_TIMER7_COUNT 0x52 +#define PIC_TIMER_COUNT(i) (PIC_TIMER0_COUNT + ((i) * 2)) + +#define PIC_ITE0_N0_N1 0x54 +#define PIC_ITE1_N0_N1 0x58 +#define PIC_ITE2_N0_N1 0x5c +#define PIC_ITE3_N0_N1 0x60 +#define PIC_ITE4_N0_N1 0x64 +#define PIC_ITE5_N0_N1 0x68 +#define PIC_ITE6_N0_N1 0x6c +#define PIC_ITE7_N0_N1 0x70 +#define PIC_ITE_N0_N1(i) (PIC_ITE0_N0_N1 + ((i) * 4)) + +#define PIC_ITE0_N2_N3 0x56 +#define PIC_ITE1_N2_N3 0x5a +#define PIC_ITE2_N2_N3 0x5e +#define PIC_ITE3_N2_N3 0x62 +#define PIC_ITE4_N2_N3 0x66 +#define PIC_ITE5_N2_N3 0x6a +#define PIC_ITE6_N2_N3 0x6e +#define PIC_ITE7_N2_N3 0x72 +#define PIC_ITE_N2_N3(i) (PIC_ITE0_N2_N3 + ((i) * 4)) + +#define PIC_IRT0 0x74 +#define PIC_IRT(i) (PIC_IRT0 + ((i) * 2)) + +#define TIMER_CYCLES_MAXVAL 0xffffffffffffffffULL + +/* + * IRT Map + */ +#define PIC_NUM_IRTS 160 + +#define PIC_IRT_WD_0_INDEX 0 +#define PIC_IRT_WD_1_INDEX 1 +#define PIC_IRT_WD_NMI_0_INDEX 2 +#define PIC_IRT_WD_NMI_1_INDEX 3 +#define PIC_IRT_TIMER_0_INDEX 4 +#define PIC_IRT_TIMER_1_INDEX 5 +#define PIC_IRT_TIMER_2_INDEX 6 +#define PIC_IRT_TIMER_3_INDEX 7 +#define PIC_IRT_TIMER_4_INDEX 8 +#define PIC_IRT_TIMER_5_INDEX 9 +#define PIC_IRT_TIMER_6_INDEX 10 +#define PIC_IRT_TIMER_7_INDEX 11 +#define PIC_IRT_CLOCK_INDEX PIC_IRT_TIMER_7_INDEX +#define PIC_IRT_TIMER_INDEX(num) ((num) + PIC_IRT_TIMER_0_INDEX) + + +/* 11 and 12 */ +#define PIC_NUM_MSG_Q_IRTS 32 +#define PIC_IRT_MSG_Q0_INDEX 12 +#define PIC_IRT_MSG_Q_INDEX(qid) ((qid) + PIC_IRT_MSG_Q0_INDEX) +/* 12 to 43 */ +#define PIC_IRT_MSG_0_INDEX 44 +#define PIC_IRT_MSG_1_INDEX 45 +/* 44 and 45 */ +#define PIC_NUM_PCIE_MSIX_IRTS 32 +#define PIC_IRT_PCIE_MSIX_0_INDEX 46 +#define PIC_IRT_PCIE_MSIX_INDEX(num) ((num) + PIC_IRT_PCIE_MSIX_0_INDEX) +/* 46 to 77 */ +#define PIC_NUM_PCIE_LINK_IRTS 4 +#define PIC_IRT_PCIE_LINK_0_INDEX 78 +#define PIC_IRT_PCIE_LINK_1_INDEX 79 +#define PIC_IRT_PCIE_LINK_2_INDEX 80 +#define PIC_IRT_PCIE_LINK_3_INDEX 81 +#define PIC_IRT_PCIE_LINK_INDEX(num) ((num) + PIC_IRT_PCIE_LINK_0_INDEX) +/* 78 to 81 */ +#define PIC_NUM_NA_IRTS 32 +/* 82 to 113 */ +#define PIC_IRT_NA_0_INDEX 82 +#define PIC_IRT_NA_INDEX(num) ((num) + PIC_IRT_NA_0_INDEX) +#define PIC_IRT_POE_INDEX 114 + +#define PIC_NUM_USB_IRTS 6 +#define PIC_IRT_USB_0_INDEX 115 +#define PIC_IRT_EHCI_0_INDEX 115 +#define PIC_IRT_EHCI_1_INDEX 118 +#define PIC_IRT_USB_INDEX(num) ((num) + PIC_IRT_USB_0_INDEX) +/* 115 to 120 */ +#define PIC_IRT_GDX_INDEX 121 +#define PIC_IRT_SEC_INDEX 122 +#define PIC_IRT_RSA_INDEX 123 + +#define PIC_NUM_COMP_IRTS 4 +#define PIC_IRT_COMP_0_INDEX 124 +#define PIC_IRT_COMP_INDEX(num) ((num) + PIC_IRT_COMP_0_INDEX) +/* 124 to 127 */ +#define PIC_IRT_GBU_INDEX 128 +#define PIC_IRT_ICC_0_INDEX 129 /* ICC - Inter Chip Coherency */ +#define PIC_IRT_ICC_1_INDEX 130 +#define PIC_IRT_ICC_2_INDEX 131 +#define PIC_IRT_CAM_INDEX 132 +#define PIC_IRT_UART_0_INDEX 133 +#define PIC_IRT_UART_1_INDEX 134 +#define PIC_IRT_I2C_0_INDEX 135 +#define PIC_IRT_I2C_1_INDEX 136 +#define PIC_IRT_SYS_0_INDEX 137 +#define PIC_IRT_SYS_1_INDEX 138 +#define PIC_IRT_JTAG_INDEX 139 +#define PIC_IRT_PIC_INDEX 140 +#define PIC_IRT_NBU_INDEX 141 +#define PIC_IRT_TCU_INDEX 142 +#define PIC_IRT_GCU_INDEX 143 /* GBC - Global Coherency */ +#define PIC_IRT_DMC_0_INDEX 144 +#define PIC_IRT_DMC_1_INDEX 145 + +#define PIC_NUM_GPIO_IRTS 4 +#define PIC_IRT_GPIO_0_INDEX 146 +#define PIC_IRT_GPIO_INDEX(num) ((num) + PIC_IRT_GPIO_0_INDEX) + +/* 146 to 149 */ +#define PIC_IRT_NOR_INDEX 150 +#define PIC_IRT_NAND_INDEX 151 +#define PIC_IRT_SPI_INDEX 152 +#define PIC_IRT_MMC_INDEX 153 + +#define PIC_CLOCK_TIMER 7 +#define PIC_IRQ_BASE 8 + +#if !defined(LOCORE) && !defined(__ASSEMBLY__) + +#define PIC_IRT_FIRST_IRQ (PIC_IRQ_BASE) +#define PIC_IRT_LAST_IRQ 63 +#define PIC_IRQ_IS_IRT(irq) ((irq) >= PIC_IRT_FIRST_IRQ) + +/* + * Misc + */ +#define PIC_IRT_VALID 1 +#define PIC_LOCAL_SCHEDULING 1 +#define PIC_GLOBAL_SCHEDULING 0 + +#define nlm_read_pic_reg(b, r) nlm_read_reg64(b, r) +#define nlm_write_pic_reg(b, r, v) nlm_write_reg64(b, r, v) +#define nlm_get_pic_pcibase(node) nlm_pcicfg_base(XLP_IO_PIC_OFFSET(node)) +#define nlm_get_pic_regbase(node) (nlm_get_pic_pcibase(node) + XLP_IO_PCI_HDRSZ) + +/* IRT and h/w interrupt routines */ +static inline int +nlm_pic_read_irt(uint64_t base, int irt_index) +{ + return nlm_read_pic_reg(base, PIC_IRT(irt_index)); +} + +static inline uint64_t +nlm_pic_read_control(uint64_t base) +{ + return nlm_read_pic_reg(base, PIC_CTRL); +} + +static inline void +nlm_pic_write_control(uint64_t base, uint64_t control) +{ + nlm_write_pic_reg(base, PIC_CTRL, control); +} + +static inline void +nlm_pic_update_control(uint64_t base, uint64_t control) +{ + uint64_t val; + + val = nlm_read_pic_reg(base, PIC_CTRL); + nlm_write_pic_reg(base, PIC_CTRL, control | val); +} + +static inline void +nlm_set_irt_to_cpu(uint64_t base, int irt, int cpu) +{ + uint64_t val; + + val = nlm_read_pic_reg(base, PIC_IRT(irt)); + val |= cpu & 0xf; + if (cpu > 15) + val |= 1 << 16; + nlm_write_pic_reg(base, PIC_IRT(irt), val); +} + +static inline void +nlm_pic_write_irt(uint64_t base, int irt_num, int en, int nmi, + int sch, int vec, int dt, int db, int dte) +{ + uint64_t val; + + val = (((uint64_t)en & 0x1) << 31) | ((nmi & 0x1) << 29) | + ((sch & 0x1) << 28) | ((vec & 0x3f) << 20) | + ((dt & 0x1) << 19) | ((db & 0x7) << 16) | + (dte & 0xffff); + + nlm_write_pic_reg(base, PIC_IRT(irt_num), val); +} + +static inline void +nlm_pic_write_irt_direct(uint64_t base, int irt_num, int en, int nmi, + int sch, int vec, int cpu) +{ + nlm_pic_write_irt(base, irt_num, en, nmi, sch, vec, 1, + (cpu >> 4), /* thread group */ + 1 << (cpu & 0xf)); /* thread mask */ +} + +static inline uint64_t +nlm_pic_read_timer(uint64_t base, int timer) +{ + return nlm_read_pic_reg(base, PIC_TIMER_COUNT(timer)); +} + +static inline void +nlm_pic_write_timer(uint64_t base, int timer, uint64_t value) +{ + nlm_write_pic_reg(base, PIC_TIMER_COUNT(timer), value); +} + +static inline void +nlm_pic_set_timer(uint64_t base, int timer, uint64_t value, int irq, int cpu) +{ + uint64_t pic_ctrl = nlm_read_pic_reg(base, PIC_CTRL); + int en; + + en = (irq > 0); + nlm_write_pic_reg(base, PIC_TIMER_MAXVAL(timer), value); + nlm_pic_write_irt_direct(base, PIC_IRT_TIMER_INDEX(timer), + en, 0, 0, irq, cpu); + + /* enable the timer */ + pic_ctrl |= (1 << (PIC_CTRL_STE + timer)); + nlm_write_pic_reg(base, PIC_CTRL, pic_ctrl); +} + +static inline void +nlm_pic_enable_irt(uint64_t base, int irt) +{ + uint64_t reg; + + reg = nlm_read_pic_reg(base, PIC_IRT(irt)); + nlm_write_pic_reg(base, PIC_IRT(irt), reg | (1u << 31)); +} + +static inline void +nlm_pic_disable_irt(uint64_t base, int irt) +{ + uint32_t reg; + + reg = nlm_read_pic_reg(base, PIC_IRT(irt)); + nlm_write_pic_reg(base, PIC_IRT(irt), reg & ~((uint64_t)1 << 31)); +} + +static inline void +nlm_pic_send_ipi(uint64_t base, int hwt, int irq, int nmi) +{ + uint64_t ipi; + int node, ncpu; + + node = hwt / 32; + ncpu = hwt & 0x1f; + ipi = ((uint64_t)nmi << 31) | (irq << 20) | (node << 17) | + (1 << (ncpu & 0xf)); + if (ncpu > 15) + ipi |= 0x10000; /* Setting bit 16 to select cpus 16-31 */ + + nlm_write_pic_reg(base, PIC_IPI_CTL, ipi); +} + +static inline void +nlm_pic_ack(uint64_t base, int irt_num) +{ + nlm_write_pic_reg(base, PIC_INT_ACK, irt_num); + + /* Ack the Status register for Watchdog & System timers */ + if (irt_num < 12) + nlm_write_pic_reg(base, PIC_STATUS, (1 << irt_num)); +} + +static inline void +nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt) +{ + nlm_pic_write_irt_direct(base, irt, 0, 0, 0, irq, 0); +} + +extern uint64_t nlm_pic_base; +int nlm_irq_to_irt(int irq); +int nlm_irt_to_irq(int irt); + +#endif /* __ASSEMBLY__ */ +#endif /* _NLM_HAL_PIC_H */ diff --git a/arch/mips/include/asm/netlogic/xlp-hal/sys.h b/arch/mips/include/asm/netlogic/xlp-hal/sys.h new file mode 100644 index 000000000000..21432f7d89b9 --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlp-hal/sys.h @@ -0,0 +1,129 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __NLM_HAL_SYS_H__ +#define __NLM_HAL_SYS_H__ + +/** +* @file_name sys.h +* @author Netlogic Microsystems +* @brief HAL for System configuration registers +*/ +#define SYS_CHIP_RESET 0x00 +#define SYS_POWER_ON_RESET_CFG 0x01 +#define SYS_EFUSE_DEVICE_CFG_STATUS0 0x02 +#define SYS_EFUSE_DEVICE_CFG_STATUS1 0x03 +#define SYS_EFUSE_DEVICE_CFG_STATUS2 0x04 +#define SYS_EFUSE_DEVICE_CFG3 0x05 +#define SYS_EFUSE_DEVICE_CFG4 0x06 +#define SYS_EFUSE_DEVICE_CFG5 0x07 +#define SYS_EFUSE_DEVICE_CFG6 0x08 +#define SYS_EFUSE_DEVICE_CFG7 0x09 +#define SYS_PLL_CTRL 0x0a +#define SYS_CPU_RESET 0x0b +#define SYS_CPU_NONCOHERENT_MODE 0x0d +#define SYS_CORE_DFS_DIS_CTRL 0x0e +#define SYS_CORE_DFS_RST_CTRL 0x0f +#define SYS_CORE_DFS_BYP_CTRL 0x10 +#define SYS_CORE_DFS_PHA_CTRL 0x11 +#define SYS_CORE_DFS_DIV_INC_CTRL 0x12 +#define SYS_CORE_DFS_DIV_DEC_CTRL 0x13 +#define SYS_CORE_DFS_DIV_VALUE 0x14 +#define SYS_RESET 0x15 +#define SYS_DFS_DIS_CTRL 0x16 +#define SYS_DFS_RST_CTRL 0x17 +#define SYS_DFS_BYP_CTRL 0x18 +#define SYS_DFS_DIV_INC_CTRL 0x19 +#define SYS_DFS_DIV_DEC_CTRL 0x1a +#define SYS_DFS_DIV_VALUE0 0x1b +#define SYS_DFS_DIV_VALUE1 0x1c +#define SYS_SENSE_AMP_DLY 0x1d +#define SYS_SOC_SENSE_AMP_DLY 0x1e +#define SYS_CTRL0 0x1f +#define SYS_CTRL1 0x20 +#define SYS_TIMEOUT_BS1 0x21 +#define SYS_BYTE_SWAP 0x22 +#define SYS_VRM_VID 0x23 +#define SYS_PWR_RAM_CMD 0x24 +#define SYS_PWR_RAM_ADDR 0x25 +#define SYS_PWR_RAM_DATA0 0x26 +#define SYS_PWR_RAM_DATA1 0x27 +#define SYS_PWR_RAM_DATA2 0x28 +#define SYS_PWR_UCODE 0x29 +#define SYS_CPU0_PWR_STATUS 0x2a +#define SYS_CPU1_PWR_STATUS 0x2b +#define SYS_CPU2_PWR_STATUS 0x2c +#define SYS_CPU3_PWR_STATUS 0x2d +#define SYS_CPU4_PWR_STATUS 0x2e +#define SYS_CPU5_PWR_STATUS 0x2f +#define SYS_CPU6_PWR_STATUS 0x30 +#define SYS_CPU7_PWR_STATUS 0x31 +#define SYS_STATUS 0x32 +#define SYS_INT_POL 0x33 +#define SYS_INT_TYPE 0x34 +#define SYS_INT_STATUS 0x35 +#define SYS_INT_MASK0 0x36 +#define SYS_INT_MASK1 0x37 +#define SYS_UCO_S_ECC 0x38 +#define SYS_UCO_M_ECC 0x39 +#define SYS_UCO_ADDR 0x3a +#define SYS_UCO_INSTR 0x3b +#define SYS_MEM_BIST0 0x3c +#define SYS_MEM_BIST1 0x3d +#define SYS_MEM_BIST2 0x3e +#define SYS_MEM_BIST3 0x3f +#define SYS_MEM_BIST4 0x40 +#define SYS_MEM_BIST5 0x41 +#define SYS_MEM_BIST6 0x42 +#define SYS_MEM_BIST7 0x43 +#define SYS_MEM_BIST8 0x44 +#define SYS_MEM_BIST9 0x45 +#define SYS_MEM_BIST10 0x46 +#define SYS_MEM_BIST11 0x47 +#define SYS_MEM_BIST12 0x48 +#define SYS_SCRTCH0 0x49 +#define SYS_SCRTCH1 0x4a +#define SYS_SCRTCH2 0x4b +#define SYS_SCRTCH3 0x4c + +#ifndef __ASSEMBLY__ + +#define nlm_read_sys_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_sys_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_get_sys_pcibase(node) nlm_pcicfg_base(XLP_IO_SYS_OFFSET(node)) +#define nlm_get_sys_regbase(node) (nlm_get_sys_pcibase(node) + XLP_IO_PCI_HDRSZ) + +extern uint64_t nlm_sys_base; +#endif +#endif diff --git a/arch/mips/include/asm/netlogic/xlp-hal/uart.h b/arch/mips/include/asm/netlogic/xlp-hal/uart.h new file mode 100644 index 000000000000..6a7046ca094d --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlp-hal/uart.h @@ -0,0 +1,191 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __XLP_HAL_UART_H__ +#define __XLP_HAL_UART_H__ + +/* UART Specific registers */ +#define UART_RX_DATA 0x00 +#define UART_TX_DATA 0x00 + +#define UART_INT_EN 0x01 +#define UART_INT_ID 0x02 +#define UART_FIFO_CTL 0x02 +#define UART_LINE_CTL 0x03 +#define UART_MODEM_CTL 0x04 +#define UART_LINE_STS 0x05 +#define UART_MODEM_STS 0x06 + +#define UART_DIVISOR0 0x00 +#define UART_DIVISOR1 0x01 + +#define BASE_BAUD (XLP_IO_CLK/16) +#define BAUD_DIVISOR(baud) (BASE_BAUD / baud) + +/* LCR mask values */ +#define LCR_5BITS 0x00 +#define LCR_6BITS 0x01 +#define LCR_7BITS 0x02 +#define LCR_8BITS 0x03 +#define LCR_STOPB 0x04 +#define LCR_PENAB 0x08 +#define LCR_PODD 0x00 +#define LCR_PEVEN 0x10 +#define LCR_PONE 0x20 +#define LCR_PZERO 0x30 +#define LCR_SBREAK 0x40 +#define LCR_EFR_ENABLE 0xbf +#define LCR_DLAB 0x80 + +/* MCR mask values */ +#define MCR_DTR 0x01 +#define MCR_RTS 0x02 +#define MCR_DRS 0x04 +#define MCR_IE 0x08 +#define MCR_LOOPBACK 0x10 + +/* FCR mask values */ +#define FCR_RCV_RST 0x02 +#define FCR_XMT_RST 0x04 +#define FCR_RX_LOW 0x00 +#define FCR_RX_MEDL 0x40 +#define FCR_RX_MEDH 0x80 +#define FCR_RX_HIGH 0xc0 + +/* IER mask values */ +#define IER_ERXRDY 0x1 +#define IER_ETXRDY 0x2 +#define IER_ERLS 0x4 +#define IER_EMSC 0x8 + +#if !defined(LOCORE) && !defined(__ASSEMBLY__) + +#define nlm_read_uart_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_uart_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_get_uart_pcibase(node, inst) \ + nlm_pcicfg_base(XLP_IO_UART_OFFSET(node, inst)) +#define nlm_get_uart_regbase(node, inst) \ + (nlm_get_uart_pcibase(node, inst) + XLP_IO_PCI_HDRSZ) + +static inline void +nlm_uart_set_baudrate(uint64_t base, int baud) +{ + uint32_t lcr; + + lcr = nlm_read_uart_reg(base, UART_LINE_CTL); + + /* enable divisor register, and write baud values */ + nlm_write_uart_reg(base, UART_LINE_CTL, lcr | (1 << 7)); + nlm_write_uart_reg(base, UART_DIVISOR0, + (BAUD_DIVISOR(baud) & 0xff)); + nlm_write_uart_reg(base, UART_DIVISOR1, + ((BAUD_DIVISOR(baud) >> 8) & 0xff)); + + /* restore default lcr */ + nlm_write_uart_reg(base, UART_LINE_CTL, lcr); +} + +static inline void +nlm_uart_outbyte(uint64_t base, char c) +{ + uint32_t lsr; + + for (;;) { + lsr = nlm_read_uart_reg(base, UART_LINE_STS); + if (lsr & 0x20) + break; + } + + nlm_write_uart_reg(base, UART_TX_DATA, (int)c); +} + +static inline char +nlm_uart_inbyte(uint64_t base) +{ + int data, lsr; + + for (;;) { + lsr = nlm_read_uart_reg(base, UART_LINE_STS); + if (lsr & 0x80) { /* parity/frame/break-error - push a zero */ + data = 0; + break; + } + if (lsr & 0x01) { /* Rx data */ + data = nlm_read_uart_reg(base, UART_RX_DATA); + break; + } + } + + return (char)data; +} + +static inline int +nlm_uart_init(uint64_t base, int baud, int databits, int stopbits, + int parity, int int_en, int loopback) +{ + uint32_t lcr; + + lcr = 0; + if (databits >= 8) + lcr |= LCR_8BITS; + else if (databits == 7) + lcr |= LCR_7BITS; + else if (databits == 6) + lcr |= LCR_6BITS; + else + lcr |= LCR_5BITS; + + if (stopbits > 1) + lcr |= LCR_STOPB; + + lcr |= parity << 3; + + /* setup default lcr */ + nlm_write_uart_reg(base, UART_LINE_CTL, lcr); + + /* Reset the FIFOs */ + nlm_write_uart_reg(base, UART_LINE_CTL, FCR_RCV_RST | FCR_XMT_RST); + + nlm_uart_set_baudrate(base, baud); + + if (loopback) + nlm_write_uart_reg(base, UART_MODEM_CTL, 0x1f); + + if (int_en) + nlm_write_uart_reg(base, UART_INT_EN, IER_ERXRDY | IER_ETXRDY); + + return 0; +} +#endif /* !LOCORE && !__ASSEMBLY__ */ +#endif /* __XLP_HAL_UART_H__ */ diff --git a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h new file mode 100644 index 000000000000..1540588e396d --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h @@ -0,0 +1,51 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _NLM_HAL_XLP_H +#define _NLM_HAL_XLP_H + +#define PIC_UART_0_IRQ 17 +#define PIC_UART_1_IRQ 18 + +#ifndef __ASSEMBLY__ + +/* SMP support functions */ +void xlp_boot_core0_siblings(void); +void xlp_wakeup_secondary_cpus(void); + +void xlp_mmu_init(void); +void nlm_hal_init(void); + +#endif /* !__ASSEMBLY__ */ +#endif /* _ASM_NLM_XLP_H */ diff --git a/arch/mips/include/asm/netlogic/xlr/iomap.h b/arch/mips/include/asm/netlogic/xlr/iomap.h index 2e3a4dd53045..2e768f032e83 100644 --- a/arch/mips/include/asm/netlogic/xlr/iomap.h +++ b/arch/mips/include/asm/netlogic/xlr/iomap.h @@ -106,26 +106,4 @@ #define DEFAULT_HT_TYPE0_CFG_BASE 0x16000000 #define DEFAULT_HT_TYPE1_CFG_BASE 0x17000000 -#ifndef __ASSEMBLY__ -#include <linux/types.h> -#include <asm/byteorder.h> - -typedef volatile __u32 nlm_reg_t; -extern unsigned long netlogic_io_base; - -/* FIXME read once in write_reg */ -#ifdef CONFIG_CPU_LITTLE_ENDIAN -#define netlogic_read_reg(base, offset) ((base)[(offset)]) -#define netlogic_write_reg(base, offset, value) ((base)[(offset)] = (value)) -#else -#define netlogic_read_reg(base, offset) (be32_to_cpu((base)[(offset)])) -#define netlogic_write_reg(base, offset, value) \ - ((base)[(offset)] = cpu_to_be32((value))) -#endif - -#define netlogic_read_reg_le32(base, offset) (le32_to_cpu((base)[(offset)])) -#define netlogic_write_reg_le32(base, offset, value) \ - ((base)[(offset)] = cpu_to_le32((value))) -#define netlogic_io_mmio(offset) ((nlm_reg_t *)(netlogic_io_base+(offset))) -#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/mips/include/asm/netlogic/xlr/msidef.h b/arch/mips/include/asm/netlogic/xlr/msidef.h new file mode 100644 index 000000000000..7e39d40be4f5 --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlr/msidef.h @@ -0,0 +1,84 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef ASM_RMI_MSIDEF_H +#define ASM_RMI_MSIDEF_H + +/* + * Constants for Intel APIC based MSI messages. + * Adapted for the RMI XLR using identical defines + */ + +/* + * Shifts for MSI data + */ + +#define MSI_DATA_VECTOR_SHIFT 0 +#define MSI_DATA_VECTOR_MASK 0x000000ff +#define MSI_DATA_VECTOR(v) (((v) << MSI_DATA_VECTOR_SHIFT) & \ + MSI_DATA_VECTOR_MASK) + +#define MSI_DATA_DELIVERY_MODE_SHIFT 8 +#define MSI_DATA_DELIVERY_FIXED (0 << MSI_DATA_DELIVERY_MODE_SHIFT) +#define MSI_DATA_DELIVERY_LOWPRI (1 << MSI_DATA_DELIVERY_MODE_SHIFT) + +#define MSI_DATA_LEVEL_SHIFT 14 +#define MSI_DATA_LEVEL_DEASSERT (0 << MSI_DATA_LEVEL_SHIFT) +#define MSI_DATA_LEVEL_ASSERT (1 << MSI_DATA_LEVEL_SHIFT) + +#define MSI_DATA_TRIGGER_SHIFT 15 +#define MSI_DATA_TRIGGER_EDGE (0 << MSI_DATA_TRIGGER_SHIFT) +#define MSI_DATA_TRIGGER_LEVEL (1 << MSI_DATA_TRIGGER_SHIFT) + +/* + * Shift/mask fields for msi address + */ + +#define MSI_ADDR_BASE_HI 0 +#define MSI_ADDR_BASE_LO 0xfee00000 + +#define MSI_ADDR_DEST_MODE_SHIFT 2 +#define MSI_ADDR_DEST_MODE_PHYSICAL (0 << MSI_ADDR_DEST_MODE_SHIFT) +#define MSI_ADDR_DEST_MODE_LOGICAL (1 << MSI_ADDR_DEST_MODE_SHIFT) + +#define MSI_ADDR_REDIRECTION_SHIFT 3 +#define MSI_ADDR_REDIRECTION_CPU (0 << MSI_ADDR_REDIRECTION_SHIFT) +#define MSI_ADDR_REDIRECTION_LOWPRI (1 << MSI_ADDR_REDIRECTION_SHIFT) + +#define MSI_ADDR_DEST_ID_SHIFT 12 +#define MSI_ADDR_DEST_ID_MASK 0x00ffff0 +#define MSI_ADDR_DEST_ID(dest) (((dest) << MSI_ADDR_DEST_ID_SHIFT) & \ + MSI_ADDR_DEST_ID_MASK) + +#endif /* ASM_RMI_MSIDEF_H */ diff --git a/arch/mips/include/asm/netlogic/xlr/pic.h b/arch/mips/include/asm/netlogic/xlr/pic.h index 5cceb746f080..868013e62f32 100644 --- a/arch/mips/include/asm/netlogic/xlr/pic.h +++ b/arch/mips/include/asm/netlogic/xlr/pic.h @@ -193,39 +193,72 @@ /* end XLS */ #ifndef __ASSEMBLY__ -static inline void pic_send_ipi(u32 ipi) + +#define PIC_IRQ_IS_EDGE_TRIGGERED(irq) (((irq) >= PIC_TIMER_0_IRQ) && \ + ((irq) <= PIC_TIMER_7_IRQ)) +#define PIC_IRQ_IS_IRT(irq) (((irq) >= PIC_IRT_FIRST_IRQ) && \ + ((irq) <= PIC_IRT_LAST_IRQ)) + +static inline int +nlm_irq_to_irt(int irq) { - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + if (PIC_IRQ_IS_IRT(irq) == 0) + return -1; - netlogic_write_reg(mmio, PIC_IPI, ipi); + return PIC_IRQ_TO_INTR(irq); } -static inline u32 pic_read_control(void) +static inline int +nlm_irt_to_irq(int irt) { - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); - return netlogic_read_reg(mmio, PIC_CTRL); + return PIC_INTR_TO_IRQ(irt); } -static inline void pic_write_control(u32 control) +static inline void +nlm_pic_enable_irt(uint64_t base, int irt) { - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + uint32_t reg; - netlogic_write_reg(mmio, PIC_CTRL, control); + reg = nlm_read_reg(base, PIC_IRT_1(irt)); + nlm_write_reg(base, PIC_IRT_1(irt), reg | (1u << 31)); } -static inline void pic_update_control(u32 control) +static inline void +nlm_pic_disable_irt(uint64_t base, int irt) { - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + uint32_t reg; - netlogic_write_reg(mmio, PIC_CTRL, - (control | netlogic_read_reg(mmio, PIC_CTRL))); + reg = nlm_read_reg(base, PIC_IRT_1(irt)); + nlm_write_reg(base, PIC_IRT_1(irt), reg & ~(1u << 31)); } -#define PIC_IRQ_IS_EDGE_TRIGGERED(irq) (((irq) >= PIC_TIMER_0_IRQ) && \ - ((irq) <= PIC_TIMER_7_IRQ)) -#define PIC_IRQ_IS_IRT(irq) (((irq) >= PIC_IRT_FIRST_IRQ) && \ - ((irq) <= PIC_IRT_LAST_IRQ)) -#endif +static inline void +nlm_pic_send_ipi(uint64_t base, int hwt, int irq, int nmi) +{ + unsigned int tid, pid; + + tid = hwt & 0x3; + pid = (hwt >> 2) & 0x07; + nlm_write_reg(base, PIC_IPI, + (pid << 20) | (tid << 16) | (nmi << 8) | irq); +} + +static inline void +nlm_pic_ack(uint64_t base, int irt) +{ + nlm_write_reg(base, PIC_INT_ACK, 1u << irt); +} +static inline void +nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt) +{ + nlm_write_reg(base, PIC_IRT_0(irt), (1u << hwt)); + /* local scheduling, invalid, level by default */ + nlm_write_reg(base, PIC_IRT_1(irt), + (1 << 30) | (1 << 6) | irq); +} + +extern uint64_t nlm_pic_base; +#endif #endif /* _ASM_NLM_XLR_PIC_H */ diff --git a/arch/mips/include/asm/netlogic/xlr/xlr.h b/arch/mips/include/asm/netlogic/xlr/xlr.h index 3e6372692a04..ff4a17b0bf78 100644 --- a/arch/mips/include/asm/netlogic/xlr/xlr.h +++ b/arch/mips/include/asm/netlogic/xlr/xlr.h @@ -40,17 +40,8 @@ struct uart_port; unsigned int nlm_xlr_uart_in(struct uart_port *, int); void nlm_xlr_uart_out(struct uart_port *, int, int); -/* SMP support functions */ -struct irq_desc; -void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc); -void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc); -int nlm_wakeup_secondary_cpus(u32 wakeup_mask); -void nlm_smp_irq_init(void); -void nlm_boot_smp_nmi(void); -void prom_pre_boot_secondary_cpus(void); - -extern struct plat_smp_ops nlm_smp_ops; -extern unsigned long nlm_common_ebase; +/* SMP helpers */ +void xlr_wakeup_secondary_cpus(void); /* XLS B silicon "Rook" */ static inline unsigned int nlm_chip_is_xls_b(void) diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index e59cd1ac09c2..d41790928c64 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -38,6 +38,14 @@ #define HPAGE_SIZE (_AC(1,UL) << HPAGE_SHIFT) #define HPAGE_MASK (~(HPAGE_SIZE - 1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) +#else /* !CONFIG_HUGETLB_PAGE */ +# ifndef BUILD_BUG +# define BUILD_BUG() do { extern void __build_bug(void); __build_bug(); } while (0) +# endif +#define HPAGE_SHIFT ({BUILD_BUG(); 0; }) +#define HPAGE_SIZE ({BUILD_BUG(); 0; }) +#define HPAGE_MASK ({BUILD_BUG(); 0; }) +#define HUGETLB_PAGE_ORDER ({BUILD_BUG(); 0; }) #endif /* CONFIG_HUGETLB_PAGE */ #ifndef __ASSEMBLY__ diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h index 8a153d2fa62a..5d56bb230345 100644 --- a/arch/mips/include/asm/pgtable-32.h +++ b/arch/mips/include/asm/pgtable-32.h @@ -19,23 +19,7 @@ #include <asm-generic/pgtable-nopmd.h> /* - * - add_wired_entry() add a fixed TLB entry, and move wired register - */ -extern void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, - unsigned long entryhi, unsigned long pagemask); - -/* - * - add_temporary_entry() add a temporary TLB entry. We use TLB entries - * starting at the top and working down. This is for populating the - * TLB before trap_init() puts the TLB miss handler in place. It - * should be used only for entries matching the actual page tables, - * to prevent inconsistencies. - */ -extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, - unsigned long entryhi, unsigned long pagemask); - - -/* Basically we have the same two-level (which is the logical three level + * Basically we have the same two-level (which is the logical three level * Linux page table layout folded) page tables as the i386. Some day * when we have proper page coloring support we can have a 1% quicker * tlb refill handling mechanism, but for now it is a bit slower but diff --git a/arch/mips/include/asm/tlbmisc.h b/arch/mips/include/asm/tlbmisc.h new file mode 100644 index 000000000000..3a452282cba0 --- /dev/null +++ b/arch/mips/include/asm/tlbmisc.h @@ -0,0 +1,10 @@ +#ifndef __ASM_TLBMISC_H +#define __ASM_TLBMISC_H + +/* + * - add_wired_entry() add a fixed TLB entry, and move wired register + */ +extern void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, + unsigned long entryhi, unsigned long pagemask); + +#endif /* __ASM_TLBMISC_H */ diff --git a/arch/mips/include/asm/traps.h b/arch/mips/include/asm/traps.h index 90ff2f497c50..ff74aec3561a 100644 --- a/arch/mips/include/asm/traps.h +++ b/arch/mips/include/asm/traps.h @@ -24,5 +24,18 @@ extern int (*board_be_handler)(struct pt_regs *regs, int is_fixup); extern void (*board_nmi_handler_setup)(void); extern void (*board_ejtag_handler_setup)(void); extern void (*board_bind_eic_interrupt)(int irq, int regset); +extern void (*board_ebase_setup)(void); + +extern int register_nmi_notifier(struct notifier_block *nb); + +#define nmi_notifier(fn, pri) \ +({ \ + static struct notifier_block fn##_nb = { \ + .notifier_call = fn, \ + .priority = pri \ + }; \ + \ + register_nmi_notifier(&fn##_nb); \ +}) #endif /* _ASM_TRAPS_H */ |
