diff options
Diffstat (limited to 'arch/i386')
35 files changed, 474 insertions, 474 deletions
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 5d51b38bd70d..b22f003eaa6d 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -1212,7 +1212,6 @@ config PCI_DIRECT config PCI_MMCONFIG bool depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) - select ACPI_BOOT default y source "drivers/pci/pcie/Kconfig" diff --git a/arch/i386/Makefile b/arch/i386/Makefile index bf7c9ba709f3..09951990a622 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -156,15 +156,6 @@ install: vmlinux install kernel_install: $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install -prepare: include/asm-$(ARCH)/asm_offsets.h -CLEAN_FILES += include/asm-$(ARCH)/asm_offsets.h - -arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/config/MARKER - -include/asm-$(ARCH)/asm_offsets.h: arch/$(ARCH)/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) - archclean: $(Q)$(MAKE) $(clean)=arch/i386/boot diff --git a/arch/i386/boot/video.S b/arch/i386/boot/video.S index 0587477c99f2..92f669470142 100644 --- a/arch/i386/boot/video.S +++ b/arch/i386/boot/video.S @@ -97,6 +97,7 @@ #define PARAM_VESAPM_OFF 0x30 #define PARAM_LFB_PAGES 0x32 #define PARAM_VESA_ATTRIB 0x34 +#define PARAM_CAPABILITIES 0x36 /* Define DO_STORE according to CONFIG_VIDEO_RETAIN */ #ifdef CONFIG_VIDEO_RETAIN @@ -233,6 +234,10 @@ mopar_gr: movw 18(%di), %ax movl %eax, %fs:(PARAM_LFB_SIZE) +# store mode capabilities + movl 10(%di), %eax + movl %eax, %fs:(PARAM_CAPABILITIES) + # switching the DAC to 8-bit is for <= 8 bpp only movw %fs:(PARAM_LFB_DEPTH), %ax cmpw $8, %ax @@ -1944,7 +1949,7 @@ store_edid: movw $0x4f15, %ax # do VBE/DDC movw $0x01, %bx movw $0x00, %cx - movw $0x01, %dx + movw $0x00, %dx movw $0x140, %di int $0x10 diff --git a/arch/i386/defconfig b/arch/i386/defconfig index ca07b95c06b8..6a431b926019 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -131,8 +131,6 @@ CONFIG_SOFTWARE_SUSPEND=y # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y @@ -144,10 +142,8 @@ CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_X86_PM_TIMER is not set diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 64682a0edacf..f10de0f2c5e6 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -11,7 +11,7 @@ obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \ obj-y += cpu/ obj-y += timers/ -obj-$(CONFIG_ACPI_BOOT) += acpi/ +obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o obj-$(CONFIG_MCA) += mca.o obj-$(CONFIG_X86_MSR) += msr.o diff --git a/arch/i386/kernel/acpi/Makefile b/arch/i386/kernel/acpi/Makefile index 5e291a20c03d..267ca48e1b6c 100644 --- a/arch/i386/kernel/acpi/Makefile +++ b/arch/i386/kernel/acpi/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_ACPI_BOOT) := boot.o +obj-y := boot.o obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 34ee500c26e5..a63351c085c6 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -40,19 +40,25 @@ #ifdef CONFIG_X86_64 -static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) { } +static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ +} extern void __init clustered_apic_check(void); -static inline int ioapic_setup_disabled(void) { return 0; } +static inline int ioapic_setup_disabled(void) +{ + return 0; +} + #include <asm/proto.h> -#else /* X86 */ +#else /* X86 */ #ifdef CONFIG_X86_LOCAL_APIC #include <mach_apic.h> #include <mach_mpparse.h> -#endif /* CONFIG_X86_LOCAL_APIC */ +#endif /* CONFIG_X86_LOCAL_APIC */ -#endif /* X86 */ +#endif /* X86 */ #define BAD_MADT_ENTRY(entry, end) ( \ (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ @@ -60,13 +66,8 @@ static inline int ioapic_setup_disabled(void) { return 0; } #define PREFIX "ACPI: " -#ifdef CONFIG_ACPI_PCI int acpi_noirq __initdata; /* skip ACPI IRQ initialization */ -int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */ -#else -int acpi_noirq __initdata = 1; -int acpi_pci_disabled __initdata = 1; -#endif +int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */ int acpi_ht __initdata = 1; /* enable HT */ int acpi_lapic; @@ -88,7 +89,7 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; #define MAX_MADT_ENTRIES 256 u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] = - { [0 ... MAX_MADT_ENTRIES-1] = 0xff }; + {[0 ... MAX_MADT_ENTRIES - 1] = 0xff }; EXPORT_SYMBOL(x86_acpiid_to_apicid); /* -------------------------------------------------------------------------- @@ -99,7 +100,7 @@ EXPORT_SYMBOL(x86_acpiid_to_apicid); * The default interrupt routing model is PIC (8259). This gets * overriden if IOAPICs are enumerated (below). */ -enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; +enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; #ifdef CONFIG_X86_64 @@ -107,7 +108,7 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; char *__acpi_map_table(unsigned long phys_addr, unsigned long size) { if (!phys_addr || !size) - return NULL; + return NULL; if (phys_addr < (end_pfn_map << PAGE_SHIFT)) return __va(phys_addr); @@ -134,8 +135,8 @@ char *__acpi_map_table(unsigned long phys, unsigned long size) unsigned long base, offset, mapped_size; int idx; - if (phys + size < 8*1024*1024) - return __va(phys); + if (phys + size < 8 * 1024 * 1024) + return __va(phys); offset = phys & (PAGE_SIZE - 1); mapped_size = PAGE_SIZE - offset; @@ -154,7 +155,7 @@ char *__acpi_map_table(unsigned long phys, unsigned long size) mapped_size += PAGE_SIZE; } - return ((unsigned char *) base + offset); + return ((unsigned char *)base + offset); } #endif @@ -172,7 +173,7 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) if (!phys_addr || !size) return -EINVAL; - mcfg = (struct acpi_table_mcfg *) __acpi_map_table(phys_addr, size); + mcfg = (struct acpi_table_mcfg *)__acpi_map_table(phys_addr, size); if (!mcfg) { printk(KERN_WARNING PREFIX "Unable to map MCFG\n"); return -ENODEV; @@ -209,20 +210,17 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) return 0; } -#endif /* CONFIG_PCI_MMCONFIG */ +#endif /* CONFIG_PCI_MMCONFIG */ #ifdef CONFIG_X86_LOCAL_APIC -static int __init -acpi_parse_madt ( - unsigned long phys_addr, - unsigned long size) +static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size) { - struct acpi_table_madt *madt = NULL; + struct acpi_table_madt *madt = NULL; if (!phys_addr || !size) return -EINVAL; - madt = (struct acpi_table_madt *) __acpi_map_table(phys_addr, size); + madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size); if (!madt) { printk(KERN_WARNING PREFIX "Unable to map MADT\n"); return -ENODEV; @@ -232,22 +230,20 @@ acpi_parse_madt ( acpi_lapic_addr = (u64) madt->lapic_address; printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n", - madt->lapic_address); + madt->lapic_address); } acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id); - + return 0; } - static int __init -acpi_parse_lapic ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic(acpi_table_entry_header * header, const unsigned long end) { - struct acpi_table_lapic *processor = NULL; + struct acpi_table_lapic *processor = NULL; - processor = (struct acpi_table_lapic*) header; + processor = (struct acpi_table_lapic *)header; if (BAD_MADT_ENTRY(processor, end)) return -EINVAL; @@ -260,20 +256,19 @@ acpi_parse_lapic ( x86_acpiid_to_apicid[processor->acpi_id] = processor->id; - mp_register_lapic ( - processor->id, /* APIC ID */ - processor->flags.enabled); /* Enabled? */ + mp_register_lapic(processor->id, /* APIC ID */ + processor->flags.enabled); /* Enabled? */ return 0; } static int __init -acpi_parse_lapic_addr_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL; - lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr*) header; + lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr *)header; if (BAD_MADT_ENTRY(lapic_addr_ovr, end)) return -EINVAL; @@ -284,12 +279,11 @@ acpi_parse_lapic_addr_ovr ( } static int __init -acpi_parse_lapic_nmi ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_lapic_nmi *lapic_nmi = NULL; - lapic_nmi = (struct acpi_table_lapic_nmi*) header; + lapic_nmi = (struct acpi_table_lapic_nmi *)header; if (BAD_MADT_ENTRY(lapic_nmi, end)) return -EINVAL; @@ -302,37 +296,32 @@ acpi_parse_lapic_nmi ( return 0; } +#endif /*CONFIG_X86_LOCAL_APIC */ -#endif /*CONFIG_X86_LOCAL_APIC*/ - -#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) +#ifdef CONFIG_X86_IO_APIC static int __init -acpi_parse_ioapic ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_ioapic(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_ioapic *ioapic = NULL; - ioapic = (struct acpi_table_ioapic*) header; + ioapic = (struct acpi_table_ioapic *)header; if (BAD_MADT_ENTRY(ioapic, end)) return -EINVAL; - + acpi_table_print_madt_entry(header); - mp_register_ioapic ( - ioapic->id, - ioapic->address, - ioapic->global_irq_base); - + mp_register_ioapic(ioapic->id, + ioapic->address, ioapic->global_irq_base); + return 0; } /* * Parse Interrupt Source Override for the ACPI SCI */ -static void -acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) +static void acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) { if (trigger == 0) /* compatible SCI trigger is level */ trigger = 3; @@ -348,7 +337,7 @@ acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) polarity = acpi_sci_flags.polarity; /* - * mp_config_acpi_legacy_irqs() already setup IRQs < 16 + * mp_config_acpi_legacy_irqs() already setup IRQs < 16 * If GSI is < 16, this will update its flags, * else it will create a new mp_irqs[] entry. */ @@ -363,12 +352,12 @@ acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) } static int __init -acpi_parse_int_src_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_int_src_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_int_src_ovr *intsrc = NULL; - intsrc = (struct acpi_table_int_src_ovr*) header; + intsrc = (struct acpi_table_int_src_ovr *)header; if (BAD_MADT_ENTRY(intsrc, end)) return -EINVAL; @@ -377,33 +366,30 @@ acpi_parse_int_src_ovr ( if (intsrc->bus_irq == acpi_fadt.sci_int) { acpi_sci_ioapic_setup(intsrc->global_irq, - intsrc->flags.polarity, intsrc->flags.trigger); + intsrc->flags.polarity, + intsrc->flags.trigger); return 0; } if (acpi_skip_timer_override && - intsrc->bus_irq == 0 && intsrc->global_irq == 2) { - printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); - return 0; + intsrc->bus_irq == 0 && intsrc->global_irq == 2) { + printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); + return 0; } - mp_override_legacy_irq ( - intsrc->bus_irq, - intsrc->flags.polarity, - intsrc->flags.trigger, - intsrc->global_irq); + mp_override_legacy_irq(intsrc->bus_irq, + intsrc->flags.polarity, + intsrc->flags.trigger, intsrc->global_irq); return 0; } - static int __init -acpi_parse_nmi_src ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_nmi_src *nmi_src = NULL; - nmi_src = (struct acpi_table_nmi_src*) header; + nmi_src = (struct acpi_table_nmi_src *)header; if (BAD_MADT_ENTRY(nmi_src, end)) return -EINVAL; @@ -415,9 +401,7 @@ acpi_parse_nmi_src ( return 0; } -#endif /* CONFIG_X86_IO_APIC */ - -#ifdef CONFIG_ACPI_BUS +#endif /* CONFIG_X86_IO_APIC */ /* * acpi_pic_sci_set_trigger() @@ -433,8 +417,7 @@ acpi_parse_nmi_src ( * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0) */ -void __init -acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) +void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) { unsigned int mask = 1 << irq; unsigned int old, new; @@ -454,10 +437,10 @@ acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) * routing tables.. */ switch (trigger) { - case 1: /* Edge - clear */ + case 1: /* Edge - clear */ new &= ~mask; break; - case 3: /* Level - set */ + case 3: /* Level - set */ new |= mask; break; } @@ -470,21 +453,22 @@ acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) outb(new >> 8, 0x4d1); } - -#endif /* CONFIG_ACPI_BUS */ - int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { #ifdef CONFIG_X86_IO_APIC if (use_pci_vector() && !platform_legacy_irq(gsi)) - *irq = IO_APIC_VECTOR(gsi); + *irq = IO_APIC_VECTOR(gsi); else #endif *irq = gsi; return 0; } -unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) +/* + * success: return IRQ number (>=0) + * failure: return < 0 + */ +int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) { unsigned int irq; unsigned int plat_gsi = gsi; @@ -497,7 +481,7 @@ unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) extern void eisa_set_level_irq(unsigned int irq); if (edge_level == ACPI_LEVEL_SENSITIVE) - eisa_set_level_irq(gsi); + eisa_set_level_irq(gsi); } #endif @@ -509,60 +493,58 @@ unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) acpi_gsi_to_irq(plat_gsi, &irq); return irq; } + EXPORT_SYMBOL(acpi_register_gsi); /* * ACPI based hotplug support for CPU */ #ifdef CONFIG_ACPI_HOTPLUG_CPU -int -acpi_map_lsapic(acpi_handle handle, int *pcpu) +int acpi_map_lsapic(acpi_handle handle, int *pcpu) { /* TBD */ return -EINVAL; } -EXPORT_SYMBOL(acpi_map_lsapic); +EXPORT_SYMBOL(acpi_map_lsapic); -int -acpi_unmap_lsapic(int cpu) +int acpi_unmap_lsapic(int cpu) { /* TBD */ return -EINVAL; } + EXPORT_SYMBOL(acpi_unmap_lsapic); -#endif /* CONFIG_ACPI_HOTPLUG_CPU */ +#endif /* CONFIG_ACPI_HOTPLUG_CPU */ -int -acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) +int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) { /* TBD */ return -EINVAL; } + EXPORT_SYMBOL(acpi_register_ioapic); -int -acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) +int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) { /* TBD */ return -EINVAL; } + EXPORT_SYMBOL(acpi_unregister_ioapic); static unsigned long __init -acpi_scan_rsdp ( - unsigned long start, - unsigned long length) +acpi_scan_rsdp(unsigned long start, unsigned long length) { - unsigned long offset = 0; - unsigned long sig_len = sizeof("RSD PTR ") - 1; + unsigned long offset = 0; + unsigned long sig_len = sizeof("RSD PTR ") - 1; /* * Scan all 16-byte boundaries of the physical memory region for the * RSDP signature. */ for (offset = 0; offset < length; offset += 16) { - if (strncmp((char *) (start + offset), "RSD PTR ", sig_len)) + if (strncmp((char *)(start + offset), "RSD PTR ", sig_len)) continue; return (start + offset); } @@ -575,20 +557,19 @@ static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size) struct acpi_table_sbf *sb; if (!phys_addr || !size) - return -EINVAL; + return -EINVAL; - sb = (struct acpi_table_sbf *) __acpi_map_table(phys_addr, size); + sb = (struct acpi_table_sbf *)__acpi_map_table(phys_addr, size); if (!sb) { printk(KERN_WARNING PREFIX "Unable to map SBF\n"); return -ENODEV; } - sbf_port = sb->sbf_cmos; /* Save CMOS port */ + sbf_port = sb->sbf_cmos; /* Save CMOS port */ return 0; } - #ifdef CONFIG_HPET_TIMER static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) @@ -598,7 +579,7 @@ static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) if (!phys || !size) return -EINVAL; - hpet_tbl = (struct acpi_table_hpet *) __acpi_map_table(phys, size); + hpet_tbl = (struct acpi_table_hpet *)__acpi_map_table(phys, size); if (!hpet_tbl) { printk(KERN_WARNING PREFIX "Unable to map HPET\n"); return -ENODEV; @@ -609,22 +590,21 @@ static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) "memory.\n"); return -1; } - #ifdef CONFIG_X86_64 - vxtime.hpet_address = hpet_tbl->addr.addrl | - ((long) hpet_tbl->addr.addrh << 32); + vxtime.hpet_address = hpet_tbl->addr.addrl | + ((long)hpet_tbl->addr.addrh << 32); - printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", - hpet_tbl->id, vxtime.hpet_address); -#else /* X86 */ + printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", + hpet_tbl->id, vxtime.hpet_address); +#else /* X86 */ { extern unsigned long hpet_address; hpet_address = hpet_tbl->addr.addrl; printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", - hpet_tbl->id, hpet_address); + hpet_tbl->id, hpet_address); } -#endif /* X86 */ +#endif /* X86 */ return 0; } @@ -640,28 +620,25 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) { struct fadt_descriptor_rev2 *fadt = NULL; - fadt = (struct fadt_descriptor_rev2*) __acpi_map_table(phys,size); - if(!fadt) { + fadt = (struct fadt_descriptor_rev2 *)__acpi_map_table(phys, size); + if (!fadt) { printk(KERN_WARNING PREFIX "Unable to map FADT\n"); return 0; } - -#ifdef CONFIG_ACPI_INTERPRETER /* initialize sci_int early for INT_SRC_OVR MADT parsing */ acpi_fadt.sci_int = fadt->sci_int; -#endif -#ifdef CONFIG_ACPI_BUS /* initialize rev and apic_phys_dest_mode for x86_64 genapic */ acpi_fadt.revision = fadt->revision; - acpi_fadt.force_apic_physical_destination_mode = fadt->force_apic_physical_destination_mode; -#endif + acpi_fadt.force_apic_physical_destination_mode = + fadt->force_apic_physical_destination_mode; #ifdef CONFIG_X86_PM_TIMER /* detect the location of the ACPI PM Timer */ if (fadt->revision >= FADT2_REVISION_ID) { /* FADT rev. 2 */ - if (fadt->xpm_tmr_blk.address_space_id != ACPI_ADR_SPACE_SYSTEM_IO) + if (fadt->xpm_tmr_blk.address_space_id != + ACPI_ADR_SPACE_SYSTEM_IO) return 0; pmtmr_ioport = fadt->xpm_tmr_blk.address; @@ -670,16 +647,15 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) pmtmr_ioport = fadt->V1_pm_tmr_blk; } if (pmtmr_ioport) - printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", pmtmr_ioport); + printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", + pmtmr_ioport); #endif return 0; } - -unsigned long __init -acpi_find_rsdp (void) +unsigned long __init acpi_find_rsdp(void) { - unsigned long rsdp_phys = 0; + unsigned long rsdp_phys = 0; if (efi_enabled) { if (efi.acpi20) @@ -691,9 +667,9 @@ acpi_find_rsdp (void) * Scan memory looking for the RSDP signature. First search EBDA (low * memory) paragraphs and then search upper memory (E0000-FFFFF). */ - rsdp_phys = acpi_scan_rsdp (0, 0x400); + rsdp_phys = acpi_scan_rsdp(0, 0x400); if (!rsdp_phys) - rsdp_phys = acpi_scan_rsdp (0xE0000, 0x20000); + rsdp_phys = acpi_scan_rsdp(0xE0000, 0x20000); return rsdp_phys; } @@ -703,8 +679,7 @@ acpi_find_rsdp (void) * Parse LAPIC entries in MADT * returns 0 on success, < 0 on error */ -static int __init -acpi_parse_madt_lapic_entries(void) +static int __init acpi_parse_madt_lapic_entries(void) { int count; @@ -713,28 +688,31 @@ acpi_parse_madt_lapic_entries(void) * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value). */ - count = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0); + count = + acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, + acpi_parse_lapic_addr_ovr, 0); if (count < 0) { - printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n"); + printk(KERN_ERR PREFIX + "Error parsing LAPIC address override entry\n"); return count; } mp_register_lapic_address(acpi_lapic_addr); count = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic, - MAX_APICS); - if (!count) { + MAX_APICS); + if (!count) { printk(KERN_ERR PREFIX "No LAPIC entries present\n"); /* TBD: Cleanup to allow fallback to MPS */ return -ENODEV; - } - else if (count < 0) { + } else if (count < 0) { printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n"); /* TBD: Cleanup to allow fallback to MPS */ return count; } - count = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0); + count = + acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0); if (count < 0) { printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); /* TBD: Cleanup to allow fallback to MPS */ @@ -742,15 +720,14 @@ acpi_parse_madt_lapic_entries(void) } return 0; } -#endif /* CONFIG_X86_LOCAL_APIC */ +#endif /* CONFIG_X86_LOCAL_APIC */ -#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) +#ifdef CONFIG_X86_IO_APIC /* * Parse IOAPIC related entries in MADT * returns 0 on success, < 0 on error */ -static int __init -acpi_parse_madt_ioapic_entries(void) +static int __init acpi_parse_madt_ioapic_entries(void) { int count; @@ -762,30 +739,34 @@ acpi_parse_madt_ioapic_entries(void) */ if (acpi_disabled || acpi_noirq) { return -ENODEV; - } + } /* - * if "noapic" boot option, don't look for IO-APICs + * if "noapic" boot option, don't look for IO-APICs */ if (skip_ioapic_setup) { printk(KERN_INFO PREFIX "Skipping IOAPIC probe " - "due to 'noapic' option.\n"); + "due to 'noapic' option.\n"); return -ENODEV; } - count = acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, MAX_IO_APICS); + count = + acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, + MAX_IO_APICS); if (!count) { printk(KERN_ERR PREFIX "No IOAPIC entries present\n"); return -ENODEV; - } - else if (count < 0) { + } else if (count < 0) { printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n"); return count; } - count = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, NR_IRQ_VECTORS); + count = + acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, + NR_IRQ_VECTORS); if (count < 0) { - printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n"); + printk(KERN_ERR PREFIX + "Error parsing interrupt source overrides entry\n"); /* TBD: Cleanup to allow fallback to MPS */ return count; } @@ -800,7 +781,9 @@ acpi_parse_madt_ioapic_entries(void) /* Fill in identity legacy mapings where no override */ mp_config_acpi_legacy_irqs(); - count = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, NR_IRQ_VECTORS); + count = + acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, + NR_IRQ_VECTORS); if (count < 0) { printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); /* TBD: Cleanup to allow fallback to MPS */ @@ -814,11 +797,9 @@ static inline int acpi_parse_madt_ioapic_entries(void) { return -1; } -#endif /* !(CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER) */ +#endif /* !CONFIG_X86_IO_APIC */ - -static void __init -acpi_process_madt(void) +static void __init acpi_process_madt(void) { #ifdef CONFIG_X86_LOCAL_APIC int count, error; @@ -853,7 +834,8 @@ acpi_process_madt(void) /* * Dell Precision Workstation 410, 610 come here. */ - printk(KERN_ERR PREFIX "Invalid BIOS MADT, disabling ACPI\n"); + printk(KERN_ERR PREFIX + "Invalid BIOS MADT, disabling ACPI\n"); disable_acpi(); } } @@ -865,7 +847,6 @@ extern int acpi_force; #ifdef __i386__ -#ifdef CONFIG_ACPI_PCI static int __init disable_acpi_irq(struct dmi_system_id *d) { if (!acpi_force) { @@ -885,12 +866,11 @@ static int __init disable_acpi_pci(struct dmi_system_id *d) } return 0; } -#endif static int __init dmi_disable_acpi(struct dmi_system_id *d) { if (!acpi_force) { - printk(KERN_NOTICE "%s detected: acpi off\n",d->ident); + printk(KERN_NOTICE "%s detected: acpi off\n", d->ident); disable_acpi(); } else { printk(KERN_NOTICE @@ -905,7 +885,8 @@ static int __init dmi_disable_acpi(struct dmi_system_id *d) static int __init force_acpi_ht(struct dmi_system_id *d) { if (!acpi_force) { - printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", d->ident); + printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", + d->ident); disable_acpi(); acpi_ht = 1; } else { @@ -924,155 +905,155 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { * Boxes that need ACPI disabled */ { - .callback = dmi_disable_acpi, - .ident = "IBM Thinkpad", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "2629H1G"), - }, - }, + .callback = dmi_disable_acpi, + .ident = "IBM Thinkpad", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "2629H1G"), + }, + }, /* * Boxes that need acpi=ht */ { - .callback = force_acpi_ht, - .ident = "FSC Primergy T850", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), - }, - }, + .callback = force_acpi_ht, + .ident = "FSC Primergy T850", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), + }, + }, { - .callback = force_acpi_ht, - .ident = "DELL GX240", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"), - }, - }, + .callback = force_acpi_ht, + .ident = "DELL GX240", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"), + }, + }, { - .callback = force_acpi_ht, - .ident = "HP VISUALIZE NT Workstation", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), - }, - }, + .callback = force_acpi_ht, + .ident = "HP VISUALIZE NT Workstation", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), + }, + }, { - .callback = force_acpi_ht, - .ident = "Compaq Workstation W8000", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), - DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), - }, - }, + .callback = force_acpi_ht, + .ident = "Compaq Workstation W8000", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), + DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ASUS P4B266", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P4B266"), - }, - }, + .callback = force_acpi_ht, + .ident = "ASUS P4B266", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P4B266"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ASUS P2B-DS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), - }, - }, + .callback = force_acpi_ht, + .ident = "ASUS P2B-DS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ASUS CUR-DLS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"), - }, - }, + .callback = force_acpi_ht, + .ident = "ASUS CUR-DLS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ABIT i440BX-W83977", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"), - DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), - }, - }, + .callback = force_acpi_ht, + .ident = "ABIT i440BX-W83977", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"), + DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM Bladecenter", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), - }, - }, + .callback = force_acpi_ht, + .ident = "IBM Bladecenter", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM eServer xSeries 360", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), - }, - }, + .callback = force_acpi_ht, + .ident = "IBM eServer xSeries 360", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM eserver xSeries 330", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), - }, - }, + .callback = force_acpi_ht, + .ident = "IBM eserver xSeries 330", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM eserver xSeries 440", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), - }, - }, - -#ifdef CONFIG_ACPI_PCI + .callback = force_acpi_ht, + .ident = "IBM eserver xSeries 440", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), + }, + }, + /* * Boxes that need ACPI PCI IRQ routing disabled */ { - .callback = disable_acpi_irq, - .ident = "ASUS A7V", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"), - DMI_MATCH(DMI_BOARD_NAME, "<A7V>"), - /* newer BIOS, Revision 1011, does work */ - DMI_MATCH(DMI_BIOS_VERSION, "ASUS A7V ACPI BIOS Revision 1007"), - }, - }, + .callback = disable_acpi_irq, + .ident = "ASUS A7V", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"), + DMI_MATCH(DMI_BOARD_NAME, "<A7V>"), + /* newer BIOS, Revision 1011, does work */ + DMI_MATCH(DMI_BIOS_VERSION, + "ASUS A7V ACPI BIOS Revision 1007"), + }, + }, /* * Boxes that need ACPI PCI IRQ routing and PCI scan disabled */ - { /* _BBN 0 bug */ - .callback = disable_acpi_pci, - .ident = "ASUS PR-DLS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"), - DMI_MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"), - DMI_MATCH(DMI_BIOS_DATE, "03/21/2003") - }, - }, + { /* _BBN 0 bug */ + .callback = disable_acpi_pci, + .ident = "ASUS PR-DLS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"), + DMI_MATCH(DMI_BIOS_VERSION, + "ASUS PR-DLS ACPI BIOS Revision 1010"), + DMI_MATCH(DMI_BIOS_DATE, "03/21/2003") + }, + }, { - .callback = disable_acpi_pci, - .ident = "Acer TravelMate 36x Laptop", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), - }, - }, -#endif - { } + .callback = disable_acpi_pci, + .ident = "Acer TravelMate 36x Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), + }, + }, + {} }; -#endif /* __i386__ */ +#endif /* __i386__ */ /* * acpi_boot_table_init() and acpi_boot_init() @@ -1097,8 +1078,7 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { * !0: failure */ -int __init -acpi_boot_table_init(void) +int __init acpi_boot_table_init(void) { int error; @@ -1111,7 +1091,7 @@ acpi_boot_table_init(void) * One exception: acpi=ht continues far enough to enumerate LAPICs */ if (acpi_disabled && !acpi_ht) - return 1; + return 1; /* * Initialize the ACPI boot-time table parser. @@ -1121,7 +1101,6 @@ acpi_boot_table_init(void) disable_acpi(); return error; } - #ifdef __i386__ check_acpi_pci(); #endif @@ -1145,7 +1124,6 @@ acpi_boot_table_init(void) return 0; } - int __init acpi_boot_init(void) { /* @@ -1153,7 +1131,7 @@ int __init acpi_boot_init(void) * One exception: acpi=ht continues far enough to enumerate LAPICs */ if (acpi_disabled && !acpi_ht) - return 1; + return 1; acpi_table_parse(ACPI_BOOT, acpi_parse_sbf); @@ -1171,4 +1149,3 @@ int __init acpi_boot_init(void) return 0; } - diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c index 726a5ca4b165..1ae2aeeda18b 100644 --- a/arch/i386/kernel/acpi/earlyquirk.c +++ b/arch/i386/kernel/acpi/earlyquirk.c @@ -7,45 +7,55 @@ #include <linux/pci.h> #include <asm/pci-direct.h> #include <asm/acpi.h> +#include <asm/apic.h> -static int __init check_bridge(int vendor, int device) +static int __init check_bridge(int vendor, int device) { /* According to Nvidia all timer overrides are bogus. Just ignore them all. */ - if (vendor == PCI_VENDOR_ID_NVIDIA) { - acpi_skip_timer_override = 1; + if (vendor == PCI_VENDOR_ID_NVIDIA) { + acpi_skip_timer_override = 1; } +#ifdef CONFIG_X86_LOCAL_APIC + /* + * ATI IXP chipsets get double timer interrupts. + * For now just do this for all ATI chipsets. + * FIXME: this needs to be checked for the non ACPI case too. + */ + if (vendor == PCI_VENDOR_ID_ATI) + disable_timer_pin_1 = 1; +#endif return 0; } - -void __init check_acpi_pci(void) -{ - int num,slot,func; + +void __init check_acpi_pci(void) +{ + int num, slot, func; /* Assume the machine supports type 1. If not it will always read ffffffff and should not have any side effect. */ /* Poor man's PCI discovery */ - for (num = 0; num < 32; num++) { - for (slot = 0; slot < 32; slot++) { - for (func = 0; func < 8; func++) { + for (num = 0; num < 32; num++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { u32 class; u32 vendor; - class = read_pci_config(num,slot,func, + class = read_pci_config(num, slot, func, PCI_CLASS_REVISION); if (class == 0xffffffff) - break; + break; if ((class >> 16) != PCI_CLASS_BRIDGE_PCI) - continue; - - vendor = read_pci_config(num, slot, func, + continue; + + vendor = read_pci_config(num, slot, func, PCI_VENDOR_ID); - - if (check_bridge(vendor&0xffff, vendor >> 16)) - return; - } - + + if (check_bridge(vendor & 0xffff, vendor >> 16)) + return; + } + } } } diff --git a/arch/i386/kernel/acpi/sleep.c b/arch/i386/kernel/acpi/sleep.c index c1af93032ff3..1cb2b186a3af 100644 --- a/arch/i386/kernel/acpi/sleep.c +++ b/arch/i386/kernel/acpi/sleep.c @@ -20,12 +20,13 @@ extern void zap_low_mappings(void); extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long)); -static void init_low_mapping(pgd_t *pgd, int pgd_limit) +static void init_low_mapping(pgd_t * pgd, int pgd_limit) { int pgd_ofs = 0; - while ((pgd_ofs < pgd_limit) && (pgd_ofs + USER_PTRS_PER_PGD < PTRS_PER_PGD)) { - set_pgd(pgd, *(pgd+USER_PTRS_PER_PGD)); + while ((pgd_ofs < pgd_limit) + && (pgd_ofs + USER_PTRS_PER_PGD < PTRS_PER_PGD)) { + set_pgd(pgd, *(pgd + USER_PTRS_PER_PGD)); pgd_ofs++, pgd++; } flush_tlb_all(); @@ -37,12 +38,13 @@ static void init_low_mapping(pgd_t *pgd, int pgd_limit) * Create an identity mapped page table and copy the wakeup routine to * low memory. */ -int acpi_save_state_mem (void) +int acpi_save_state_mem(void) { if (!acpi_wakeup_address) return 1; init_low_mapping(swapper_pg_dir, USER_PTRS_PER_PGD); - memcpy((void *) acpi_wakeup_address, &wakeup_start, &wakeup_end - &wakeup_start); + memcpy((void *)acpi_wakeup_address, &wakeup_start, + &wakeup_end - &wakeup_start); acpi_copy_wakeup_routine(acpi_wakeup_address); return 0; @@ -51,7 +53,7 @@ int acpi_save_state_mem (void) /* * acpi_restore_state - undo effects of acpi_save_state_mem */ -void acpi_restore_state_mem (void) +void acpi_restore_state_mem(void) { zap_low_mappings(); } @@ -67,7 +69,8 @@ void acpi_restore_state_mem (void) void __init acpi_reserve_bootmem(void) { if ((&wakeup_end - &wakeup_start) > PAGE_SIZE) { - printk(KERN_ERR "ACPI: Wakeup code way too big, S3 disabled.\n"); + printk(KERN_ERR + "ACPI: Wakeup code way too big, S3 disabled.\n"); return; } @@ -90,10 +93,8 @@ static int __init acpi_sleep_setup(char *str) return 1; } - __setup("acpi_sleep=", acpi_sleep_setup); - static __init int reset_videomode_after_s3(struct dmi_system_id *d) { acpi_video_flags |= 2; @@ -101,14 +102,14 @@ static __init int reset_videomode_after_s3(struct dmi_system_id *d) } static __initdata struct dmi_system_id acpisleep_dmi_table[] = { - { /* Reset video mode after returning from ACPI S3 sleep */ - .callback = reset_videomode_after_s3, - .ident = "Toshiba Satellite 4030cdt", - .matches = { - DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"), - }, - }, - { } + { /* Reset video mode after returning from ACPI S3 sleep */ + .callback = reset_videomode_after_s3, + .ident = "Toshiba Satellite 4030cdt", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"), + }, + }, + {} }; static int __init acpisleep_dmi_init(void) diff --git a/arch/i386/kernel/acpi/wakeup.S b/arch/i386/kernel/acpi/wakeup.S index 44d886c745ec..7c74fe0dc93c 100644 --- a/arch/i386/kernel/acpi/wakeup.S +++ b/arch/i386/kernel/acpi/wakeup.S @@ -304,12 +304,6 @@ ret_point: call restore_processor_state ret -ENTRY(do_suspend_lowlevel_s4bios) - call save_processor_state - call save_registers - call acpi_enter_sleep_state_s4bios - ret - ALIGN # saved registers saved_gdt: .long 0,0 diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 46ce9b248f55..9ad43be9a01f 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -151,7 +151,7 @@ static char __devinit *table_lookup_model(struct cpuinfo_x86 *c) } -void __devinit get_cpu_vendor(struct cpuinfo_x86 *c, int early) +static void __devinit get_cpu_vendor(struct cpuinfo_x86 *c, int early) { char *v = c->x86_vendor_id; int i; diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index 60a9e54dd20e..822c8ce9d1f1 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -31,6 +31,7 @@ #include <linux/cpufreq.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> +#include <linux/compiler.h> #include <asm/io.h> #include <asm/delay.h> #include <asm/uaccess.h> @@ -57,6 +58,8 @@ static struct cpufreq_acpi_io *acpi_io_data[NR_CPUS]; static struct cpufreq_driver acpi_cpufreq_driver; +static unsigned int acpi_pstate_strict; + static int acpi_processor_write_port( u16 port, @@ -163,34 +166,44 @@ acpi_processor_set_performance ( } /* - * Then we read the 'status_register' and compare the value with the - * target state's 'status' to make sure the transition was successful. - * Note that we'll poll for up to 1ms (100 cycles of 10us) before - * giving up. + * Assume the write went through when acpi_pstate_strict is not used. + * As read status_register is an expensive operation and there + * are no specific error cases where an IO port write will fail. */ - - port = data->acpi_data.status_register.address; - bit_width = data->acpi_data.status_register.bit_width; - - dprintk("Looking for 0x%08x from port 0x%04x\n", - (u32) data->acpi_data.states[state].status, port); - - for (i=0; i<100; i++) { - ret = acpi_processor_read_port(port, bit_width, &value); - if (ret) { - dprintk("Invalid port width 0x%04x\n", bit_width); - retval = ret; - goto migrate_end; + if (acpi_pstate_strict) { + /* Then we read the 'status_register' and compare the value + * with the target state's 'status' to make sure the + * transition was successful. + * Note that we'll poll for up to 1ms (100 cycles of 10us) + * before giving up. + */ + + port = data->acpi_data.status_register.address; + bit_width = data->acpi_data.status_register.bit_width; + + dprintk("Looking for 0x%08x from port 0x%04x\n", + (u32) data->acpi_data.states[state].status, port); + + for (i=0; i<100; i++) { + ret = acpi_processor_read_port(port, bit_width, &value); + if (ret) { + dprintk("Invalid port width 0x%04x\n", bit_width); + retval = ret; + goto migrate_end; + } + if (value == (u32) data->acpi_data.states[state].status) + break; + udelay(10); } - if (value == (u32) data->acpi_data.states[state].status) - break; - udelay(10); + } else { + i = 0; + value = (u32) data->acpi_data.states[state].status; } /* notify cpufreq */ cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE); - if (value != (u32) data->acpi_data.states[state].status) { + if (unlikely(value != (u32) data->acpi_data.states[state].status)) { unsigned int tmp = cpufreq_freqs.new; cpufreq_freqs.new = cpufreq_freqs.old; cpufreq_freqs.old = tmp; @@ -537,6 +550,8 @@ acpi_cpufreq_exit (void) return; } +module_param(acpi_pstate_strict, uint, 0644); +MODULE_PARM_DESC(acpi_pstate_strict, "value 0 or non-zero. non-zero -> strict ACPI checks are performed during frequency changes."); late_initcall(acpi_cpufreq_init); module_exit(acpi_cpufreq_exit); diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index bf02b5026e62..8ef38544453c 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -467,11 +467,11 @@ static void __init longhaul_setup_voltagescaling(void) } if (vrmrev==0) { - dprintk ("VRM 8.5 \n"); + dprintk ("VRM 8.5\n"); memcpy (voltage_table, vrm85scales, sizeof(voltage_table)); numvscales = (voltage_table[maxvid]-voltage_table[minvid])/25; } else { - dprintk ("Mobile VRM \n"); + dprintk ("Mobile VRM\n"); memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table)); numvscales = (voltage_table[maxvid]-voltage_table[minvid])/5; } diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 327a55d4d1c6..c397b6220430 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -259,7 +259,7 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy) if (model->op_points == NULL) { /* Matched a non-match */ - dprintk(KERN_INFO PFX "no table support for CPU model \"%s\": \n", + dprintk(KERN_INFO PFX "no table support for CPU model \"%s\"\n", cpu->x86_model_id); #ifndef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI dprintk(KERN_INFO PFX "try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n"); @@ -402,7 +402,7 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) for (i=0; i<p.state_count; i++) { if (p.states[i].control != p.states[i].status) { - dprintk("Different control (%x) and status values (%x)\n", + dprintk("Different control (%llu) and status values (%llu)\n", p.states[i].control, p.states[i].status); result = -EINVAL; goto err_unreg; @@ -415,7 +415,7 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) } if (p.states[i].core_frequency > p.states[0].core_frequency) { - dprintk("P%u has larger frequency (%u) than P0 (%u), skipping\n", i, + dprintk("P%u has larger frequency (%llu) than P0 (%llu), skipping\n", i, p.states[i].core_frequency, p.states[0].core_frequency); p.states[i].core_frequency = 0; continue; @@ -498,13 +498,6 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST)) return -ENODEV; - for (i = 0; i < N_IDS; i++) - if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) - break; - - if (i != N_IDS) - centrino_cpu[policy->cpu] = &cpu_ids[i]; - if (is_const_loops_cpu(policy->cpu)) { centrino_driver.flags |= CPUFREQ_CONST_LOOPS; } @@ -513,6 +506,13 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) if (policy->cpu != 0) return -ENODEV; + for (i = 0; i < N_IDS; i++) + if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) + break; + + if (i != N_IDS) + centrino_cpu[policy->cpu] = &cpu_ids[i]; + if (!centrino_cpu[policy->cpu]) { dprintk(KERN_INFO PFX "found unsupported CPU with " "Enhanced SpeedStep: send /proc/cpuinfo to " diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c index b25fb6b635ae..2718fb6f6aba 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c @@ -99,7 +99,7 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) u32 function = GET_SPEEDSTEP_FREQS; if (!(ist_info.event & 0xFFFF)) { - dprintk("bug #1422 -- can't read freqs from BIOS\n", result); + dprintk("bug #1422 -- can't read freqs from BIOS\n"); return -ENODEV; } diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index 3aad03839660..9e24f7b207ee 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -319,7 +319,7 @@ work_notifysig: # deal with pending signals and # vm86-space xorl %edx, %edx call do_notify_resume - jmp restore_all + jmp resume_userspace ALIGN work_notifysig_v86: @@ -329,7 +329,7 @@ work_notifysig_v86: movl %eax, %esp xorl %edx, %edx call do_notify_resume - jmp restore_all + jmp resume_userspace # perform syscall exit tracing ALIGN diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index 0480ca9e9e57..e437fb367498 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -17,7 +17,7 @@ #include <asm/desc.h> #include <asm/cache.h> #include <asm/thread_info.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> #include <asm/setup.h> /* diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 0e727e6da5c9..378313b0cce9 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -60,6 +60,8 @@ int sis_apic_bug = -1; */ int nr_ioapic_registers[MAX_IO_APICS]; +int disable_timer_pin_1 __initdata; + /* * Rough estimation of how many shared IRQs there are, can * be changed anytime. @@ -573,8 +575,7 @@ static int balanced_irq(void *unused) } for ( ; ; ) { - set_current_state(TASK_INTERRUPTIBLE); - time_remaining = schedule_timeout(time_remaining); + time_remaining = schedule_timeout_interruptible(time_remaining); try_to_freeze(); if (time_after(jiffies, prev_balance_time+balanced_irq_interval)) { @@ -1634,9 +1635,9 @@ void disable_IO_APIC(void) clear_IO_APIC(); /* - * If the i82559 is routed through an IOAPIC + * If the i8259 is routed through an IOAPIC * Put that IOAPIC in virtual wire mode - * so legacy interrups can be delivered. + * so legacy interrupts can be delivered. */ pin = find_isa_irq_pin(0, mp_ExtINT); if (pin != -1) { @@ -2212,6 +2213,8 @@ static inline void check_timer(void) setup_nmi(); enable_8259A_irq(0); } + if (disable_timer_pin_1 > 0) + clear_IO_APIC_pin(0, pin1); return; } clear_IO_APIC_pin(0, pin1); @@ -2423,7 +2426,7 @@ device_initcall(ioapic_init_sysfs); ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI int __init io_apic_get_unique_id (int ioapic, int apic_id) { @@ -2577,4 +2580,4 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a return 0; } -#endif /*CONFIG_ACPI_BOOT*/ +#endif /* CONFIG_ACPI */ diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index 5d0b9a8fc43d..15949fd08109 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -122,8 +122,8 @@ static int MP_valid_apicid(int apicid, int version) static void __init MP_processor_info (struct mpc_config_processor *m) { - int ver, apicid, cpu, found_bsp = 0; - physid_mask_t tmp; + int ver, apicid; + physid_mask_t phys_cpu; if (!(m->mpc_cpuflag & CPU_ENABLED)) return; @@ -181,7 +181,6 @@ static void __init MP_processor_info (struct mpc_config_processor *m) if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { Dprintk(" Bootup CPU\n"); boot_cpu_physical_apicid = m->mpc_apicid; - found_bsp = 1; } if (num_processors >= NR_CPUS) { @@ -195,29 +194,26 @@ static void __init MP_processor_info (struct mpc_config_processor *m) " Processor ignored.\n", maxcpus); return; } - num_processors++; ver = m->mpc_apicver; if (!MP_valid_apicid(apicid, ver)) { printk(KERN_WARNING "Processor #%d INVALID. (Max ID: %d).\n", m->mpc_apicid, MAX_APICS); - --num_processors; return; } - if (found_bsp) - cpu = 0; - else - cpu = num_processors - 1; - cpu_set(cpu, cpu_possible_map); - tmp = apicid_to_cpu_present(apicid); - physids_or(phys_cpu_present_map, phys_cpu_present_map, tmp); - + cpu_set(num_processors, cpu_possible_map); + num_processors++; + phys_cpu = apicid_to_cpu_present(apicid); + physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); + /* * Validate version */ if (ver == 0x0) { - printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! fixing up to 0x10. (tell your hw vendor)\n", m->mpc_apicid); + printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! " + "fixing up to 0x10. (tell your hw vendor)\n", + m->mpc_apicid); ver = 0x10; } apic_version[m->mpc_apicid] = ver; @@ -668,8 +664,6 @@ void __init get_smp_config (void) struct intel_mp_floating *mpf = mpf_found; /* - * ACPI may be used to obtain the entire SMP configuration or just to - * enumerate/configure processors (CONFIG_ACPI_BOOT). Note that * ACPI supports both logical (e.g. Hyper-Threading) and physical * processors, where MPS only supports physical. */ @@ -825,7 +819,7 @@ void __init find_smp_config (void) ACPI-based MP Configuration -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI void __init mp_register_lapic_address ( u64 address) @@ -871,7 +865,7 @@ void __init mp_register_lapic ( MP_processor_info(&processor); } -#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT)) +#ifdef CONFIG_X86_IO_APIC #define MP_ISA_BUS 0 #define MP_MAX_IOAPIC_PIN 127 @@ -1086,11 +1080,9 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) */ static int gsi_to_irq[MAX_GSI_NUM]; -#ifdef CONFIG_ACPI_BUS /* Don't set up the ACPI SCI because it's already set up */ if (acpi_fadt.sci_int == gsi) return gsi; -#endif ioapic = mp_find_ioapic(gsi); if (ioapic < 0) { @@ -1133,13 +1125,11 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) if (gsi < MAX_GSI_NUM) { if (gsi > 15) gsi = pci_irq++; -#ifdef CONFIG_ACPI_BUS /* * Don't assign IRQ used by ACPI SCI */ if (gsi == acpi_fadt.sci_int) gsi = pci_irq++; -#endif gsi_to_irq[irq] = gsi; } else { printk(KERN_ERR "GSI %u is too high\n", gsi); @@ -1153,5 +1143,5 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) return gsi; } -#endif /*CONFIG_X86_IO_APIC && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT)*/ -#endif /*CONFIG_ACPI_BOOT*/ +#endif /* CONFIG_X86_IO_APIC */ +#endif /* CONFIG_ACPI */ diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index 340980203b09..7b6368bf8974 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -694,17 +694,22 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code) __attribute__((regparm(3))) int do_syscall_trace(struct pt_regs *regs, int entryexit) { - int is_sysemu = test_thread_flag(TIF_SYSCALL_EMU), ret = 0; - /* With TIF_SYSCALL_EMU set we want to ignore TIF_SINGLESTEP for syscall - * interception. */ + int is_sysemu = test_thread_flag(TIF_SYSCALL_EMU); + /* + * With TIF_SYSCALL_EMU set we want to ignore TIF_SINGLESTEP for syscall + * interception + */ int is_singlestep = !is_sysemu && test_thread_flag(TIF_SINGLESTEP); + int ret = 0; /* do the secure computing check first */ - secure_computing(regs->orig_eax); + if (!entryexit) + secure_computing(regs->orig_eax); if (unlikely(current->audit_context)) { if (entryexit) - audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), regs->eax); + audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), + regs->eax); /* Debug traps, when using PTRACE_SINGLESTEP, must be sent only * on the syscall exit path. Normally, when TIF_SYSCALL_AUDIT is * not used, entry.S will call us only on syscall exit, not @@ -738,7 +743,7 @@ int do_syscall_trace(struct pt_regs *regs, int entryexit) /* the 0x80 provides a way for the tracing parent to distinguish between a syscall stop and SIGTRAP delivery */ /* Note that the debugger could change the result of test_thread_flag!*/ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80:0)); /* * this isn't the same as continuing with a signal, but it will do @@ -750,7 +755,7 @@ int do_syscall_trace(struct pt_regs *regs, int entryexit) current->exit_code = 0; } ret = is_sysemu; - out: +out: if (unlikely(current->audit_context) && !entryexit) audit_syscall_entry(current, AUDIT_ARCH_I386, regs->orig_eax, regs->ebx, regs->ecx, regs->edx, regs->esi); @@ -759,6 +764,7 @@ int do_syscall_trace(struct pt_regs *regs, int entryexit) regs->orig_eax = -1; /* force skip of syscall restarting */ if (unlikely(current->audit_context)) - audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), regs->eax); + audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), + regs->eax); return 1; } diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index e29fd5aeaf8e..dc39ca6a7eca 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -87,14 +87,14 @@ EXPORT_SYMBOL(boot_cpu_data); unsigned long mmu_cr4_features; -#ifdef CONFIG_ACPI_INTERPRETER +#ifdef CONFIG_ACPI int acpi_disabled = 0; #else int acpi_disabled = 1; #endif EXPORT_SYMBOL(acpi_disabled); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI int __initdata acpi_force = 0; extern acpi_interrupt_flags acpi_sci_flags; #endif @@ -139,6 +139,7 @@ struct sys_desc_table_struct { unsigned char table[0]; }; struct edid_info edid_info; +EXPORT_SYMBOL_GPL(edid_info); struct ist_info ist_info; #if defined(CONFIG_X86_SPEEDSTEP_SMI) || \ defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE) @@ -798,7 +799,7 @@ static void __init parse_cmdline_early (char ** cmdline_p) } #endif -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* "acpi=off" disables both ACPI table parsing and interpreter */ else if (!memcmp(from, "acpi=off", 8)) { disable_acpi(); @@ -850,11 +851,16 @@ static void __init parse_cmdline_early (char ** cmdline_p) #endif #ifdef CONFIG_X86_LOCAL_APIC + if (!memcmp(from, "disable_timer_pin_1", 19)) + disable_timer_pin_1 = 1; + if (!memcmp(from, "enable_timer_pin_1", 18)) + disable_timer_pin_1 = -1; + /* disable IO-APIC */ else if (!memcmp(from, "noapic", 6)) disable_ioapic_setup(); #endif /* CONFIG_X86_LOCAL_APIC */ -#endif /* CONFIG_ACPI_BOOT */ +#endif /* CONFIG_ACPI */ #ifdef CONFIG_X86_LOCAL_APIC /* enable local APIC */ @@ -1299,7 +1305,7 @@ legacy_init_iomem_resources(struct resource *code_resource, struct resource *dat */ static void __init register_memory(void) { - unsigned long gapstart, gapsize; + unsigned long gapstart, gapsize, round; unsigned long long last; int i; @@ -1344,14 +1350,14 @@ static void __init register_memory(void) } /* - * Start allocating dynamic PCI memory a bit into the gap, - * aligned up to the nearest megabyte. - * - * Question: should we try to pad it up a bit (do something - * like " + (gapsize >> 3)" in there too?). We now have the - * technology. + * See how much we want to round up: start off with + * rounding to the next 1MB area. */ - pci_mem_start = (gapstart + 0xfffff) & ~0xfffff; + round = 0x100000; + while ((gapsize >> 4) > round) + round += round; + /* Fun with two's complement */ + pci_mem_start = (gapstart + round) & -round; printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n", pci_mem_start, gapstart, gapsize); @@ -1579,7 +1585,7 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled) efi_map_memmap(); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* * Parse the ACPI tables for possible boot-time SMP configuration. */ diff --git a/arch/i386/kernel/sigframe.h b/arch/i386/kernel/sigframe.h index d21b14f5c25c..0b2221711dad 100644 --- a/arch/i386/kernel/sigframe.h +++ b/arch/i386/kernel/sigframe.h @@ -1,6 +1,6 @@ struct sigframe { - char *pretcode; + char __user *pretcode; int sig; struct sigcontext sc; struct _fpstate fpstate; @@ -10,10 +10,10 @@ struct sigframe struct rt_sigframe { - char *pretcode; + char __user *pretcode; int sig; - struct siginfo *pinfo; - void *puc; + struct siginfo __user *pinfo; + void __user *puc; struct siginfo info; struct ucontext uc; struct _fpstate fpstate; diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 5e4893d2b9f2..c70cd2a08304 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -1330,8 +1330,7 @@ void __cpu_die(unsigned int cpu) printk ("CPU %d is now offline\n", cpu); return; } - current->state = TASK_UNINTERRUPTIBLE; - schedule_timeout(HZ/10); + msleep(100); } printk(KERN_ERR "CPU %u didn't die...\n", cpu); } diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c index 7b3b27d64409..516bf5653b02 100644 --- a/arch/i386/kernel/srat.c +++ b/arch/i386/kernel/srat.c @@ -213,12 +213,18 @@ static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_c node_end_pfn[nid] = memory_chunk->end_pfn; } +static u8 pxm_to_nid_map[MAX_PXM_DOMAINS];/* _PXM to logical node ID map */ + +int pxm_to_node(int pxm) +{ + return pxm_to_nid_map[pxm]; +} + /* Parse the ACPI Static Resource Affinity Table */ static int __init acpi20_parse_srat(struct acpi_table_srat *sratp) { u8 *start, *end, *p; int i, j, nid; - u8 pxm_to_nid_map[MAX_PXM_DOMAINS];/* _PXM to logical node ID map */ u8 nid_to_pxm_map[MAX_NUMNODES];/* logical node ID to _PXM map */ start = (u8 *)(&(sratp->reserved) + 1); /* skip header */ diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index eefea7c55008..2883a4d4f01f 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -329,8 +329,7 @@ EXPORT_SYMBOL(get_cmos_time); static void sync_cmos_clock(unsigned long dummy); -static struct timer_list sync_cmos_timer = - TIMER_INITIALIZER(sync_cmos_clock, 0, 0); +static DEFINE_TIMER(sync_cmos_timer, sync_cmos_clock, 0, 0); static void sync_cmos_clock(unsigned long dummy) { diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S index 13b9c62cbbb4..4710195b6b74 100644 --- a/arch/i386/kernel/vmlinux.lds.S +++ b/arch/i386/kernel/vmlinux.lds.S @@ -144,12 +144,7 @@ SECTIONS *(.exitcall.exit) } - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } + STABS_DEBUG + + DWARF_DEBUG } diff --git a/arch/i386/kernel/vsyscall-sigreturn.S b/arch/i386/kernel/vsyscall-sigreturn.S index 68afa50dd7cf..fadb5bc3c374 100644 --- a/arch/i386/kernel/vsyscall-sigreturn.S +++ b/arch/i386/kernel/vsyscall-sigreturn.S @@ -7,7 +7,7 @@ */ #include <asm/unistd.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> /* XXX diff --git a/arch/i386/kernel/vsyscall.lds.S b/arch/i386/kernel/vsyscall.lds.S index a7977707c8e5..98699ca6e52d 100644 --- a/arch/i386/kernel/vsyscall.lds.S +++ b/arch/i386/kernel/vsyscall.lds.S @@ -3,7 +3,7 @@ * object prelinked to its virtual address, and with only one read-only * segment (that fits in one page). This script controls its layout. */ -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> SECTIONS { diff --git a/arch/i386/mach-es7000/es7000plat.c b/arch/i386/mach-es7000/es7000plat.c index 2000bdca2fc2..dc6660511b07 100644 --- a/arch/i386/mach-es7000/es7000plat.c +++ b/arch/i386/mach-es7000/es7000plat.c @@ -51,7 +51,7 @@ struct mip_reg *host_reg; int mip_port; unsigned long mip_addr, host_addr; -#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT)) +#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI) /* * GSI override for ES7000 platforms. @@ -73,7 +73,7 @@ es7000_rename_gsi(int ioapic, int gsi) return gsi; } -#endif // (CONFIG_X86_IO_APIC) && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT) +#endif /* (CONFIG_X86_IO_APIC) && (CONFIG_ACPI) */ void __init setup_unisys () diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile index 1bff03f36965..ead6122dd06d 100644 --- a/arch/i386/pci/Makefile +++ b/arch/i386/pci/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o obj-$(CONFIG_PCI_DIRECT) += direct.o pci-y := fixup.o -pci-$(CONFIG_ACPI_PCI) += acpi.o +pci-$(CONFIG_ACPI) += acpi.o pci-y += legacy.o irq.o pci-$(CONFIG_X86_VISWS) := visws.o fixup.o diff --git a/arch/i386/pci/acpi.c b/arch/i386/pci/acpi.c index 42913f43feb0..2941674f35eb 100644 --- a/arch/i386/pci/acpi.c +++ b/arch/i386/pci/acpi.c @@ -3,16 +3,31 @@ #include <linux/init.h> #include <linux/irq.h> #include <asm/hw_irq.h> +#include <asm/numa.h> #include "pci.h" struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum) { + struct pci_bus *bus; + if (domain != 0) { printk(KERN_WARNING "PCI: Multiple domains not supported\n"); return NULL; } - return pcibios_scan_root(busnum); + bus = pcibios_scan_root(busnum); +#ifdef CONFIG_ACPI_NUMA + if (bus != NULL) { + int pxm = acpi_get_pxm(device->handle); + if (pxm >= 0) { + bus->sysdata = (void *)(unsigned long)pxm_to_node(pxm); + printk("bus %d -> pxm %d -> node %ld\n", + busnum, pxm, (long)(bus->sysdata)); + } + } +#endif + + return bus; } extern int pci_routeirq; diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c index 3cc480998a47..6d6338500c3c 100644 --- a/arch/i386/pci/i386.c +++ b/arch/i386/pci/i386.c @@ -283,9 +283,9 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, /* Write-combine setting is ignored, it is changed via the mtrr * interfaces on this platform. */ - if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, - vma->vm_end - vma->vm_start, - vma->vm_page_prot)) + if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot)) return -EAGAIN; return 0; diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index 86348b68fda1..326a2edc3834 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -1075,7 +1075,7 @@ static void pirq_penalize_isa_irq(int irq, int active) void pcibios_penalize_isa_irq(int irq, int active) { -#ifdef CONFIG_ACPI_PCI +#ifdef CONFIG_ACPI if (!acpi_noirq) acpi_penalize_isa_irq(irq, active); else diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 60f0e7a1162a..dfbf80cff834 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -127,13 +127,6 @@ static int __init pci_mmcfg_init(void) (pci_mmcfg_config[0].base_address == 0)) goto out; - /* Kludge for now. Don't use mmconfig on AMD systems because - those have some busses where mmconfig doesn't work, - and we don't parse ACPI MCFG well enough to handle that. - Remove when proper handling is added. */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) - goto out; - printk(KERN_INFO "PCI: Using MMCONFIG\n"); raw_pci_ops = &pci_mmcfg; pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; diff --git a/arch/i386/power/swsusp.S b/arch/i386/power/swsusp.S index c4105286ff26..c893b897217f 100644 --- a/arch/i386/power/swsusp.S +++ b/arch/i386/power/swsusp.S @@ -12,7 +12,7 @@ #include <linux/linkage.h> #include <asm/segment.h> #include <asm/page.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> .text |
