diff options
Diffstat (limited to 'arch/blackfin')
18 files changed, 66 insertions, 579 deletions
diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h index 7dbc664eab1e..7fd0ec7b5b0f 100644 --- a/arch/blackfin/include/asm/bfin_serial.h +++ b/arch/blackfin/include/asm/bfin_serial.h @@ -184,7 +184,7 @@ struct bfin_uart_regs { #undef __BFP #ifndef port_membase -# define port_membase(p) (((struct bfin_serial_port *)(p))->port.membase) +# define port_membase(p) 0 #endif #define UART_GET_CHAR(p) bfin_read16(port_membase(p) + OFFSET_RBR) @@ -235,10 +235,10 @@ struct bfin_uart_regs { #define UART_SET_DLAB(p) do { UART_PUT_LCR(p, UART_GET_LCR(p) | DLAB); SSYNC(); } while (0) #ifndef put_lsr_cache -# define put_lsr_cache(p, v) (((struct bfin_serial_port *)(p))->lsr = (v)) +# define put_lsr_cache(p, v) #endif #ifndef get_lsr_cache -# define get_lsr_cache(p) (((struct bfin_serial_port *)(p))->lsr) +# define get_lsr_cache(p) 0 #endif /* The hardware clears the LSR bits upon read, so we need to cache diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h index c722acdda0d3..38657dac1235 100644 --- a/arch/blackfin/include/asm/gptimers.h +++ b/arch/blackfin/include/asm/gptimers.h @@ -193,4 +193,22 @@ uint16_t get_enabled_gptimers(void); uint32_t get_gptimer_status(unsigned int group); void set_gptimer_status(unsigned int group, uint32_t value); +/* + * All Blackfin system MMRs are padded to 32bits even if the register + * itself is only 16bits. So use a helper macro to streamline this. + */ +#define __BFP(m) u16 m; u16 __pad_##m + +/* + * bfin timer registers layout + */ +struct bfin_gptimer_regs { + __BFP(config); + u32 counter; + u32 period; + u32 width; +}; + +#undef __BFP + #endif diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index ff9a9f35d50b..0ccba60b9ccf 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -397,8 +397,10 @@ #define __NR_open_by_handle_at 376 #define __NR_clock_adjtime 377 #define __NR_syncfs 378 +#define __NR_setns 379 +#define __NR_sendmmsg 380 -#define __NR_syscall 379 +#define __NR_syscall 381 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ diff --git a/arch/blackfin/kernel/debug-mmrs.c b/arch/blackfin/kernel/debug-mmrs.c index 94b1d8a0256a..fce4807ceef9 100644 --- a/arch/blackfin/kernel/debug-mmrs.c +++ b/arch/blackfin/kernel/debug-mmrs.c @@ -13,6 +13,7 @@ #include <asm/blackfin.h> #include <asm/gpio.h> +#include <asm/gptimers.h> #include <asm/bfin_can.h> #include <asm/bfin_dma.h> #include <asm/bfin_ppi.h> @@ -230,8 +231,8 @@ bfin_debug_mmrs_dma(struct dentry *parent, unsigned long base, int num, char mdm #define DMA(num) _DMA(num, DMA##num##_NEXT_DESC_PTR, 0, "") #define _MDMA(num, x) \ do { \ - _DMA(num, x##DMA_D##num##_CONFIG, 'D', #x); \ - _DMA(num, x##DMA_S##num##_CONFIG, 'S', #x); \ + _DMA(num, x##DMA_D##num##_NEXT_DESC_PTR, 'D', #x); \ + _DMA(num, x##DMA_S##num##_NEXT_DESC_PTR, 'S', #x); \ } while (0) #define MDMA(num) _MDMA(num, M) #define IMDMA(num) _MDMA(num, IM) @@ -264,20 +265,15 @@ bfin_debug_mmrs_eppi(struct dentry *parent, unsigned long base, int num) /* * General Purpose Timers */ -#define GPTIMER_OFF(mmr) (TIMER0_##mmr - TIMER0_CONFIG) -#define __GPTIMER(name) \ - do { \ - strcpy(_buf, #name); \ - debugfs_create_x16(buf, S_IRUSR|S_IWUSR, parent, (u16 *)(base + GPTIMER_OFF(name))); \ - } while (0) +#define __GPTIMER(uname, lname) __REGS(gptimer, #uname, lname) static void __init __maybe_unused bfin_debug_mmrs_gptimer(struct dentry *parent, unsigned long base, int num) { char buf[32], *_buf = REGS_STR_PFX(buf, TIMER, num); - __GPTIMER(CONFIG); - __GPTIMER(COUNTER); - __GPTIMER(PERIOD); - __GPTIMER(WIDTH); + __GPTIMER(CONFIG, config); + __GPTIMER(COUNTER, counter); + __GPTIMER(PERIOD, period); + __GPTIMER(WIDTH, width); } #define GPTIMER(num) bfin_debug_mmrs_gptimer(parent, TIMER##num##_CONFIG, num) @@ -355,7 +351,7 @@ bfin_debug_mmrs_ppi(struct dentry *parent, unsigned long base, int num) __PPI(DELAY, delay); __PPI(FRAME, frame); } -#define PPI(num) bfin_debug_mmrs_ppi(parent, PPI##num##_STATUS, num) +#define PPI(num) bfin_debug_mmrs_ppi(parent, PPI##num##_CONTROL, num) /* * SPI @@ -1288,15 +1284,15 @@ static int __init bfin_debug_mmrs_init(void) D16(VR_CTL); D32(CHIPID); /* it's part of this hardware block */ -#if defined(PPI_STATUS) || defined(PPI0_STATUS) || defined(PPI1_STATUS) +#if defined(PPI_CONTROL) || defined(PPI0_CONTROL) || defined(PPI1_CONTROL) parent = debugfs_create_dir("ppi", top); -# ifdef PPI_STATUS - bfin_debug_mmrs_ppi(parent, PPI_STATUS, -1); +# ifdef PPI_CONTROL + bfin_debug_mmrs_ppi(parent, PPI_CONTROL, -1); # endif -# ifdef PPI0_STATUS +# ifdef PPI0_CONTROL PPI(0); # endif -# ifdef PPI1_STATUS +# ifdef PPI1_CONTROL PPI(1); # endif #endif @@ -1341,6 +1337,10 @@ static int __init bfin_debug_mmrs_init(void) D16(RSI_PID1); D16(RSI_PID2); D16(RSI_PID3); + D16(RSI_PID4); + D16(RSI_PID5); + D16(RSI_PID6); + D16(RSI_PID7); D16(RSI_PWR_CONTROL); D16(RSI_RD_WAIT_EN); D32(RSI_RESPONSE0); diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h deleted file mode 100644 index f6d924ac0c44..000000000000 --- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Copyright 2008-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later - */ - -#include <asm/dma.h> -#include <asm/portmux.h> - -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) -# define CONFIG_SERIAL_BFIN_CTSRTS - -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_CTS_PIN -# define CONFIG_UART1_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_RTS_PIN -# define CONFIG_UART1_RTS_PIN -1 -# endif -#endif - -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; - int uart_status_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { -#ifdef CONFIG_SERIAL_BFIN_UART0 - { - 0xFFC00400, - IRQ_UART0_RX, - IRQ_UART0_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART0_TX, - CH_UART0_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART1 - { - 0xFFC02000, - IRQ_UART1_RX, - IRQ_UART1_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART1_TX, - CH_UART1_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART1_CTS_PIN, - CONFIG_UART1_RTS_PIN, -#endif - }, -#endif -}; - -#define DRIVER_NAME "bfin-uart" - -#include <asm/bfin_serial.h> diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h index 98a51c479290..cfab428e577c 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF514.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h @@ -36,13 +36,13 @@ #define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */ #define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */ #define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */ -#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */ -#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */ -#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */ -#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */ -#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */ -#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */ -#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */ -#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */ +#define RSI_PID0 0xFFC038D0 /* RSI Peripheral ID Register 0 */ +#define RSI_PID1 0xFFC038D4 /* RSI Peripheral ID Register 1 */ +#define RSI_PID2 0xFFC038D8 /* RSI Peripheral ID Register 2 */ +#define RSI_PID3 0xFFC038DC /* RSI Peripheral ID Register 3 */ +#define RSI_PID4 0xFFC038E0 /* RSI Peripheral ID Register 0 */ +#define RSI_PID5 0xFFC038E4 /* RSI Peripheral ID Register 1 */ +#define RSI_PID6 0xFFC038E8 /* RSI Peripheral ID Register 2 */ +#define RSI_PID7 0xFFC038EC /* RSI Peripheral ID Register 3 */ #endif /* _DEF_BF514_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h deleted file mode 100644 index 960e08919def..000000000000 --- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Copyright 2007-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later - */ - -#include <asm/dma.h> -#include <asm/portmux.h> - -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) -# define CONFIG_SERIAL_BFIN_CTSRTS - -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_CTS_PIN -# define CONFIG_UART1_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_RTS_PIN -# define CONFIG_UART1_RTS_PIN -1 -# endif -#endif - -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; - int uart_status_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { -#ifdef CONFIG_SERIAL_BFIN_UART0 - { - 0xFFC00400, - IRQ_UART0_RX, - IRQ_UART0_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART0_TX, - CH_UART0_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART1 - { - 0xFFC02000, - IRQ_UART1_RX, - IRQ_UART1_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART1_TX, - CH_UART1_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART1_CTS_PIN, - CONFIG_UART1_RTS_PIN, -#endif - }, -#endif -}; - -#define DRIVER_NAME "bfin-uart" - -#include <asm/bfin_serial.h> diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h index cc383adfdffa..aab80bb1a683 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF525.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h @@ -185,8 +185,8 @@ #define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ #define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */ #define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ -#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ -#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ +#define USB_EP_NI7_RXINTERVAL 0xffc03be0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03be8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ #define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */ diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h deleted file mode 100644 index 45dcaa4f3e41..000000000000 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2006-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later - */ - -#include <asm/dma.h> -#include <asm/portmux.h> - -#ifdef CONFIG_BFIN_UART0_CTSRTS -# define CONFIG_SERIAL_BFIN_CTSRTS -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif -#endif - -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; - int uart_status_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { - { - 0xFFC00400, - IRQ_UART0_RX, - IRQ_UART0_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART0_TX, - CH_UART0_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, -#endif - } -}; - -#define DRIVER_NAME "bfin-uart" - -#include <asm/bfin_serial.h> diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index e16dc4560048..76db1d483173 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -382,7 +382,6 @@ static struct platform_device net2272_bfin_device = { #endif #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -#ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; static struct mtd_partition bfin_plat_nand_partitions[] = { @@ -396,7 +395,6 @@ static struct mtd_partition bfin_plat_nand_partitions[] = { .offset = MTDPART_OFS_APPEND, }, }; -#endif #define BFIN_NAND_PLAT_CLE 2 #define BFIN_NAND_PLAT_ALE 1 @@ -423,11 +421,9 @@ static struct platform_nand_data bfin_plat_nand_data = { .chip = { .nr_chips = 1, .chip_delay = 30, -#ifdef CONFIG_MTD_PARTITIONS .part_probe_types = part_probes, .partitions = bfin_plat_nand_partitions, .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), -#endif }, .ctrl = { .cmd_ctrl = bfin_plat_nand_cmd_ctrl, diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h deleted file mode 100644 index 3e955dba8951..000000000000 --- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Copyright 2006-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later - */ - -#include <asm/dma.h> -#include <asm/portmux.h> - -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) -# define CONFIG_SERIAL_BFIN_CTSRTS - -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_CTS_PIN -# define CONFIG_UART1_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_RTS_PIN -# define CONFIG_UART1_RTS_PIN -1 -# endif -#endif - -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; - int uart_status_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { -#ifdef CONFIG_SERIAL_BFIN_UART0 - { - 0xFFC00400, - IRQ_UART0_RX, - IRQ_UART0_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART0_TX, - CH_UART0_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART1 - { - 0xFFC02000, - IRQ_UART1_RX, - IRQ_UART1_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART1_TX, - CH_UART1_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART1_CTS_PIN, - CONFIG_UART1_RTS_PIN, -#endif - }, -#endif -}; - -#define DRIVER_NAME "bfin-uart" - -#include <asm/bfin_serial.h> diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h deleted file mode 100644 index beb502e9cb33..000000000000 --- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright 2008-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <asm/dma.h> -#include <asm/portmux.h> - -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) -# define CONFIG_SERIAL_BFIN_CTSRTS - -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_CTS_PIN -# define CONFIG_UART1_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_RTS_PIN -# define CONFIG_UART1_RTS_PIN -1 -# endif -#endif - -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; - int uart_status_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { -#ifdef CONFIG_SERIAL_BFIN_UART0 - { - 0xFFC00400, - IRQ_UART0_RX, - IRQ_UART0_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART0_TX, - CH_UART0_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART1 - { - 0xFFC02000, - IRQ_UART1_RX, - IRQ_UART1_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART1_TX, - CH_UART1_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART1_CTS_PIN, - CONFIG_UART1_RTS_PIN, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART2 - { - 0xFFC02100, - IRQ_UART2_RX, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART2_TX, - CH_UART2_RX, -#endif -#ifdef CONFIG_BFIN_UART2_CTSRTS - CONFIG_UART2_CTS_PIN, - CONFIG_UART2_RTS_PIN, -#endif - }, -#endif -}; - -#define DRIVER_NAME "bfin-uart" - -#include <asm/bfin_serial.h> diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h deleted file mode 100644 index 0d94edaaaa2e..000000000000 --- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright 2007-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <asm/dma.h> -#include <asm/portmux.h> - -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) || \ - defined(CONFIG_BFIN_UART2_CTSRTS) || defined(CONFIG_BFIN_UART3_CTSRTS) -# define CONFIG_SERIAL_BFIN_HARD_CTSRTS -#endif - -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; - int uart_status_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { -#ifdef CONFIG_SERIAL_BFIN_UART0 - { - 0xFFC00400, - IRQ_UART0_RX, - IRQ_UART0_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART0_TX, - CH_UART0_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - 0, - 0, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART1 - { - 0xFFC02000, - IRQ_UART1_RX, - IRQ_UART1_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART1_TX, - CH_UART1_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - GPIO_PE10, - GPIO_PE9, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART2 - { - 0xFFC02100, - IRQ_UART2_RX, - IRQ_UART2_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART2_TX, - CH_UART2_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - 0, - 0, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART3 - { - 0xFFC03100, - IRQ_UART3_RX, - IRQ_UART3_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART3_TX, - CH_UART3_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - GPIO_PB3, - GPIO_PB2, -#endif - }, -#endif -}; - -#define DRIVER_NAME "bfin-uart" - -#include <asm/bfin_serial.h> diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h index 1cbba115f96f..1fa41ec03f31 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -271,10 +271,10 @@ #define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ #define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ #define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ +#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ /* USB Endpoint 1 Control Registers */ -#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ #define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ #define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ #define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ @@ -284,10 +284,10 @@ #define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ #define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ #define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ +#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ /* USB Endpoint 2 Control Registers */ -#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ #define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ #define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ #define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ @@ -297,10 +297,10 @@ #define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ #define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ #define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ +#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ /* USB Endpoint 3 Control Registers */ -#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ #define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ #define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ #define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ @@ -310,10 +310,10 @@ #define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ #define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ #define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ +#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ /* USB Endpoint 4 Control Registers */ -#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ #define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ #define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ #define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ @@ -323,10 +323,10 @@ #define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ #define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ #define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ +#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ /* USB Endpoint 5 Control Registers */ -#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ #define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ #define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ #define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ @@ -336,10 +336,10 @@ #define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ #define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ #define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ +#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ /* USB Endpoint 6 Control Registers */ -#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ #define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ #define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ #define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ @@ -349,10 +349,10 @@ #define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ #define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ #define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ +#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ /* USB Endpoint 7 Control Registers */ -#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ #define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ #define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ #define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ @@ -361,8 +361,9 @@ #define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ #define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ #define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ -#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ -#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ +#define USB_EP_NI7_RXINTERVAL 0xffc03fe0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03fe8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ + #define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ /* USB Channel 0 Config Registers */ diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c index 3926cd909b66..9231a942892b 100644 --- a/arch/blackfin/mach-bf561/boards/acvilon.c +++ b/arch/blackfin/mach-bf561/boards/acvilon.c @@ -243,7 +243,6 @@ static struct platform_device bfin_uart0_device = { #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -#ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", NULL }; static struct mtd_partition bfin_plat_nand_partitions[] = { @@ -257,7 +256,6 @@ static struct mtd_partition bfin_plat_nand_partitions[] = { .offset = MTDPART_OFS_APPEND, }, }; -#endif #define BFIN_NAND_PLAT_CLE 2 #define BFIN_NAND_PLAT_ALE 3 @@ -286,11 +284,9 @@ static struct platform_nand_data bfin_plat_nand_data = { .chip = { .nr_chips = 1, .chip_delay = 30, -#ifdef CONFIG_MTD_PARTITIONS .part_probe_types = part_probes, .partitions = bfin_plat_nand_partitions, .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), -#endif }, .ctrl = { .cmd_ctrl = bfin_plat_nand_cmd_ctrl, diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h deleted file mode 100644 index 3a6947456cf1..000000000000 --- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2006-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <asm/dma.h> -#include <asm/portmux.h> - -#ifdef CONFIG_BFIN_UART0_CTSRTS -# define CONFIG_SERIAL_BFIN_CTSRTS -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif -#endif - -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; - int uart_status_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { - { - 0xFFC00400, - IRQ_UART_RX, - IRQ_UART_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART_TX, - CH_UART_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, -#endif - } -}; - -#define DRIVER_NAME "bfin-uart" - -#include <asm/bfin_serial.h> diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index f96933f48a7f..225d311c9701 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1753,6 +1753,8 @@ ENTRY(_sys_call_table) .long _sys_open_by_handle_at .long _sys_clock_adjtime .long _sys_syncfs + .long _sys_setns + .long _sys_sendmmsg /* 380 */ .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall diff --git a/arch/blackfin/mm/maccess.c b/arch/blackfin/mm/maccess.c index b71cebc1f8a3..e2532114c5fd 100644 --- a/arch/blackfin/mm/maccess.c +++ b/arch/blackfin/mm/maccess.c @@ -16,7 +16,7 @@ static int validate_memory_access_address(unsigned long addr, int size) return bfin_mem_access_type(addr, size); } -long probe_kernel_read(void *dst, void *src, size_t size) +long probe_kernel_read(void *dst, const void *src, size_t size) { unsigned long lsrc = (unsigned long)src; int mem_type; @@ -55,7 +55,7 @@ long probe_kernel_read(void *dst, void *src, size_t size) return -EFAULT; } -long probe_kernel_write(void *dst, void *src, size_t size) +long probe_kernel_write(void *dst, const void *src, size_t size) { unsigned long ldst = (unsigned long)dst; int mem_type; |
