diff options
Diffstat (limited to 'arch/blackfin/mach-bf548/include/mach/defBF54x_base.h')
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/defBF54x_base.h | 289 |
1 files changed, 0 insertions, 289 deletions
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h index 8590c8c78336..ab04d137fd8b 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h @@ -1609,44 +1609,6 @@ #define PINT2 0x40000000 /* Pin Interrupt 2 */ #define PINT3 0x80000000 /* Pin Interrupt 3 */ -/* Bit masks for DMAx_CONFIG, MDMA_Sx_CONFIG, MDMA_Dx_CONFIG */ - -#define DMAEN 0x1 /* DMA Channel Enable */ -#define WNR 0x2 /* DMA Direction */ -#define WDSIZE_8 0x0 /* Transfer Word Size = 8 */ -#define WDSIZE_16 0x4 /* Transfer Word Size = 16 */ -#define WDSIZE_32 0x8 /* Transfer Word Size = 32 */ -#define DMA2D 0x10 /* DMA Mode */ -#define RESTART 0x20 /* Work Unit Transitions */ -#define DI_SEL 0x40 /* Data Interrupt Timing Select */ -#define DI_EN 0x80 /* Data Interrupt Enable */ - -#define NDSIZE 0xf00 /* Flex Descriptor Size */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ - -#define DMAFLOW 0xf000 /* Next Operation */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ - -/* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */ - -#define DMA_DONE 0x1 /* DMA Completion Interrupt Status */ -#define DMA_ERR 0x2 /* DMA Error Interrupt Status */ -#define DFETCH 0x4 /* DMA Descriptor Fetch */ -#define DMA_RUN 0x8 /* DMA Channel Running */ - /* Bit masks for DMAx_PERIPHERAL_MAP, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */ #define CTYPE 0x40 /* DMA Channel Type */ @@ -1815,10 +1777,6 @@ #define DEB3_MERROR 0x40 /* DEB3 Error (2nd) */ #define CORE_MERROR 0x80 /* Core Error (2nd) */ -/* Bit masks for EBIU_ERRADD */ - -#define ERROR_ADDRESS 0xffffffff /* Error Address */ - /* Bit masks for EBIU_RSTCTL */ #define DDRSRESET 0x1 /* DDR soft reset */ @@ -1827,98 +1785,6 @@ #define SRACK 0x10 /* Self-refresh acknowledge */ #define MDDRENABLE 0x20 /* Mobile DDR enable */ -/* Bit masks for EBIU_DDRBRC0 */ - -#define BRC0 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC1 */ - -#define BRC1 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC2 */ - -#define BRC2 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC3 */ - -#define BRC3 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC4 */ - -#define BRC4 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC5 */ - -#define BRC5 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC6 */ - -#define BRC6 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC7 */ - -#define BRC7 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC0 */ - -#define BWC0 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC1 */ - -#define BWC1 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC2 */ - -#define BWC2 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC3 */ - -#define BWC3 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC4 */ - -#define BWC4 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC5 */ - -#define BWC5 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC6 */ - -#define BWC6 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC7 */ - -#define BWC7 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRACCT */ - -#define ACCT 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRTACT */ - -#define TECT 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRARCT */ - -#define ARCT 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRGC0 */ - -#define GC0 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRGC1 */ - -#define GC1 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRGC2 */ - -#define GC2 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRGC3 */ - -#define GC3 0xffffffff /* Count */ - /* Bit masks for EBIU_DDRMCEN */ #define B0WCENABLE 0x1 /* Bank 0 write count enable */ @@ -2092,12 +1958,6 @@ #define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ #define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ -/* Bit masks for WDOG_CTL */ - -#define WDEV 0x6 /* Watchdog Event */ -#define WDEN 0xff0 /* Watchdog Enable */ -#define WDRO 0x8000 /* Watchdog Rolled Over */ - /* Bit masks for CNT_CONFIG */ #define CNTE 0x1 /* Counter Enable */ @@ -2149,81 +2009,6 @@ #define DPRESCALE 0xf /* Load Counter Register */ -/* Bit masks for RTC_STAT */ - -#define SECONDS 0x3f /* Seconds */ -#define MINUTES 0xfc0 /* Minutes */ -#define HOURS 0x1f000 /* Hours */ -#define DAY_COUNTER 0xfffe0000 /* Day Counter */ - -/* Bit masks for RTC_ICTL */ - -#define STOPWATCH_INTERRUPT_ENABLE 0x1 /* Stopwatch Interrupt Enable */ -#define ALARM_INTERRUPT_ENABLE 0x2 /* Alarm Interrupt Enable */ -#define SECONDS_INTERRUPT_ENABLE 0x4 /* Seconds Interrupt Enable */ -#define MINUTES_INTERRUPT_ENABLE 0x8 /* Minutes Interrupt Enable */ -#define HOURS_INTERRUPT_ENABLE 0x10 /* Hours Interrupt Enable */ -#define TWENTY_FOUR_HOURS_INTERRUPT_ENABLE 0x20 /* 24 Hours Interrupt Enable */ -#define DAY_ALARM_INTERRUPT_ENABLE 0x40 /* Day Alarm Interrupt Enable */ -#define WRITE_COMPLETE_INTERRUPT_ENABLE 0x8000 /* Write Complete Interrupt Enable */ - -/* Bit masks for RTC_ISTAT */ - -#define STOPWATCH_EVENT_FLAG 0x1 /* Stopwatch Event Flag */ -#define ALARM_EVENT_FLAG 0x2 /* Alarm Event Flag */ -#define SECONDS_EVENT_FLAG 0x4 /* Seconds Event Flag */ -#define MINUTES_EVENT_FLAG 0x8 /* Minutes Event Flag */ -#define HOURS_EVENT_FLAG 0x10 /* Hours Event Flag */ -#define TWENTY_FOUR_HOURS_EVENT_FLAG 0x20 /* 24 Hours Event Flag */ -#define DAY_ALARM_EVENT_FLAG 0x40 /* Day Alarm Event Flag */ -#define WRITE_PENDING__STATUS 0x4000 /* Write Pending Status */ -#define WRITE_COMPLETE 0x8000 /* Write Complete */ - -/* Bit masks for RTC_SWCNT */ - -#define STOPWATCH_COUNT 0xffff /* Stopwatch Count */ - -/* Bit masks for RTC_ALARM */ - -#define SECONDS 0x3f /* Seconds */ -#define MINUTES 0xfc0 /* Minutes */ -#define HOURS 0x1f000 /* Hours */ -#define DAY 0xfffe0000 /* Day */ - -/* Bit masks for RTC_PREN */ - -#define PREN 0x1 /* Prescaler Enable */ - -/* Bit masks for OTP_CONTROL */ - -#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ -#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ -#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ -#define FWRTEST 0x2000 /* OTP/Fuse Write Test */ -#define FRDEN 0x4000 /* OTP/Fuse Read Enable */ -#define FWREN 0x8000 /* OTP/Fuse Write Enable */ - -/* Bit masks for OTP_BEN */ - -#define FBEN 0xffff /* OTP/Fuse Byte Enable */ - -/* Bit masks for OTP_STATUS */ - -#define FCOMP 0x1 /* OTP/Fuse Access Complete */ -#define FERROR 0x2 /* OTP/Fuse Access Error */ -#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ -#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ -#define FPGMEN 0x40 /* OTP/Fuse Program Enable */ - -/* Bit masks for OTP_TIMING */ - -#define USECDIV 0xff /* Micro Second Divider */ -#define READACC 0x7f00 /* Read Access Time */ -#define CPUMPRL 0x38000 /* Charge Pump Release Time */ -#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */ -#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */ -#define PGMTIME 0xff000000 /* Program Time */ - /* Bit masks for SECURE_SYSSWT */ #define EMUDABL 0x1 /* Emulation Disable. */ @@ -2252,26 +2037,6 @@ #define AFEXIT 0x10 /* Authentication Firmware Exit */ #define SECSTAT 0xe0 /* Secure Status */ -/* Bit masks for PLL_DIV */ - -#define CSEL 0x30 /* Core Select */ -#define SSEL 0xf /* System Select */ -#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ -#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ -#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ -#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ - -/* Bit masks for PLL_CTL */ - -#define MSEL 0x7e00 /* Multiplier Select */ -#define BYPASS 0x100 /* PLL Bypass Enable */ -#define OUTPUT_DELAY 0x80 /* External Memory Output Delay Enable */ -#define INPUT_DELAY 0x40 /* External Memory Input Delay Enable */ -#define PDWN 0x20 /* Power Down */ -#define STOPCK 0x8 /* Stop Clock */ -#define PLL_OFF 0x2 /* Disable PLL */ -#define DF 0x1 /* Divide Frequency */ - /* SWRST Masks */ #define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ #define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ @@ -2279,52 +2044,6 @@ #define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ #define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ -/* Bit masks for PLL_STAT */ - -#define PLL_LOCKED 0x20 /* PLL Locked Status */ -#define ACTIVE_PLLDISABLED 0x4 /* Active Mode With PLL Disabled */ -#define FULL_ON 0x2 /* Full-On Mode */ -#define ACTIVE_PLLENABLED 0x1 /* Active Mode With PLL Enabled */ -#define RTCWS 0x400 /* RTC/Reset Wake-Up Status */ -#define CANWS 0x800 /* CAN Wake-Up Status */ -#define USBWS 0x2000 /* USB Wake-Up Status */ -#define KPADWS 0x4000 /* Keypad Wake-Up Status */ -#define ROTWS 0x8000 /* Rotary Wake-Up Status */ -#define GPWS 0x1000 /* General-Purpose Wake-Up Status */ - -/* Bit masks for VR_CTL */ - -#define FREQ 0x3 /* Regulator Switching Frequency */ -#define GAIN 0xc /* Voltage Output Level Gain */ -#define VLEV 0xf0 /* Internal Voltage Level */ -#define SCKELOW 0x8000 /* Drive SCKE Low During Reset Enable */ -#define WAKE 0x100 /* RTC/Reset Wake-Up Enable */ -#define CANWE 0x200 /* CAN0/1 Wake-Up Enable */ -#define GPWE 0x400 /* General-Purpose Wake-Up Enable */ -#define USBWE 0x800 /* USB Wake-Up Enable */ -#define KPADWE 0x1000 /* Keypad Wake-Up Enable */ -#define ROTWE 0x2000 /* Rotary Wake-Up Enable */ - -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN_5 0x0000 /* GAIN = 5*/ -#define GAIN_10 0x0004 /* GAIN = 1*/ -#define GAIN_20 0x0008 /* GAIN = 2*/ -#define GAIN_50 0x000C /* GAIN = 5*/ - -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - /* Bit masks for NFC_CTL */ #define WR_DLY 0xf /* Write Strobe Delay */ @@ -2489,14 +2208,6 @@ #define UCCT 0x40 /* Universal Counter CAN Trigger */ #define UCE 0x80 /* Universal Counter Enable */ -/* Bit masks for CAN0_UCCNT */ - -#define UCCNT 0xffff /* Universal Counter Count Value */ - -/* Bit masks for CAN0_UCRC */ - -#define UCVAL 0xffff /* Universal Counter Reload/Capture Value */ - /* Bit masks for CAN0_CEC */ #define RXECNT 0xff /* Receive Error Counter */ |
