diff options
Diffstat (limited to 'arch/arm')
37 files changed, 192 insertions, 377 deletions
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 18f70b35da4c..204bccfcc110 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -432,7 +432,7 @@ pinctrl-0 = <&mmc0_pins_default>; }; -&gpio0 { +&gpio0_target { /* Do not idle the GPIO used for holding the VTT regulator */ ti,no-reset-on-init; ti,no-idle-on-init; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 9915c891e05f..7a9eb2b0d45b 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -127,7 +127,7 @@ ranges = <0x0 0x5000 0x1000>; }; - target-module@7000 { /* 0x44e07000, ap 14 20.0 */ + gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "gpio1"; reg = <0x7000 0x4>, @@ -2038,7 +2038,9 @@ reg = <0xe000 0x4>, <0xe054 0x4>; reg-names = "rev", "sysc"; - ti,sysc-midle ; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 848e2a8884e2..14bbc438055f 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -337,6 +337,8 @@ ti,hwmods = "dss_dispc"; clocks = <&disp_clk>; clock-names = "fck"; + + max-memory-bandwidth = <230000000>; }; rfbi: rfbi@4832a800 { diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index ea0e7c19eb4e..5cac2dd58241 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -2732,7 +2732,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; dma-names = "tx", "rx"; - clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>, + clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; @@ -2768,8 +2768,8 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; status = "disabled"; @@ -2786,9 +2786,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x68000 0x2000>, @@ -2804,7 +2803,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2821,9 +2820,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x6c000 0x2000>, @@ -2839,7 +2837,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2856,9 +2854,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x70000 0x2000>, @@ -2874,7 +2871,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2891,9 +2888,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x74000 0x2000>, @@ -2909,7 +2905,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2926,9 +2922,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x78000 0x2000>, @@ -2944,7 +2939,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2961,9 +2956,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x7c000 0x2000>, @@ -2979,7 +2973,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index d01fc8744fd7..b6ef1a7ac8a4 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -124,6 +124,7 @@ spi-max-frequency = <100000>; spi-cpol; spi-cpha; + spi-cs-high; backlight= <&backlight>; label = "lcd"; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index a53657b83288..bda454d12150 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/mfd/dbx500-prcmu.h> #include <dt-bindings/arm/ux500_pm_domains.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <1>; @@ -59,8 +60,12 @@ * cooling. */ cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; + polling-delay-passive = <250>; + /* + * This sensor fires interrupts to update the thermal + * zone, so no polling is needed. + */ + polling-delay = <0>; thermal-sensors = <&thermal>; @@ -79,7 +84,7 @@ cooling-maps { trip = <&cpu_alert>; - cooling-device = <&CPU0 0 2>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; contribution = <100>; }; }; diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index b34970ce6b31..01e3c0f4be92 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -228,7 +228,7 @@ CONFIG_RTC_DRV_OMAP=m CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y CONFIG_COMMON_CLK_PWM=m -CONFIG_REMOTEPROC=m +CONFIG_REMOTEPROC=y CONFIG_DA8XX_REMOTEPROC=m CONFIG_MEMORY=y CONFIG_TI_AEMIF=m diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 13ba53286901..e4c8def9a0a5 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -415,7 +415,7 @@ CONFIG_SPI_SH_MSIOF=m CONFIG_SPI_SH_HSPI=y CONFIG_SPI_SIRF=y CONFIG_SPI_STM32=m -CONFIG_SPI_STM32_QSPI=m +CONFIG_SPI_STM32_QSPI=y CONFIG_SPI_SUN4I=y CONFIG_SPI_SUN6I=y CONFIG_SPI_TEGRA114=y @@ -933,7 +933,7 @@ CONFIG_BCM2835_MBOX=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y -CONFIG_REMOTEPROC=m +CONFIG_REMOTEPROC=y CONFIG_ST_REMOTEPROC=m CONFIG_RPMSG_VIRTIO=m CONFIG_ASPEED_LPC_CTRL=m diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 64eb896907bf..d3f50971e451 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -364,6 +364,7 @@ CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m CONFIG_DRM_TILCDC=m CONFIG_DRM_PANEL_SIMPLE=m +CONFIG_DRM_TI_TFP410=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y @@ -423,6 +424,7 @@ CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_SIMPLE=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OPTION=m CONFIG_USB_TEST=m CONFIG_NOP_USB_XCEIV=m CONFIG_AM335X_PHY_USB=m @@ -460,6 +462,7 @@ CONFIG_MMC_SDHCI_OMAP=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m CONFIG_LEDS_CPCAP=m +CONFIG_LEDS_LM3532=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_PCA963X=m CONFIG_LEDS_PWM=m @@ -481,7 +484,7 @@ CONFIG_RTC_DRV_OMAP=m CONFIG_RTC_DRV_CPCAP=m CONFIG_DMADEVICES=y CONFIG_OMAP_IOMMU=y -CONFIG_REMOTEPROC=m +CONFIG_REMOTEPROC=y CONFIG_OMAP_REMOTEPROC=m CONFIG_WKUP_M3_RPROC=m CONFIG_SOC_TI=y diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 32edfadb1593..a6d4ee86ba54 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -118,6 +118,8 @@ #define L310_AUX_CTRL_STORE_LIMITATION BIT(11) /* R2P0+ */ #define L310_AUX_CTRL_EXCLUSIVE_CACHE BIT(12) #define L310_AUX_CTRL_ASSOCIATIVITY_16 BIT(16) +#define L310_AUX_CTRL_FWA_SHIFT 23 +#define L310_AUX_CTRL_FWA_MASK (3 << 23) #define L310_AUX_CTRL_CACHE_REPLACE_RR BIT(25) /* R2P0+ */ #define L310_AUX_CTRL_NS_LOCKDOWN BIT(26) #define L310_AUX_CTRL_NS_INT_CTRL BIT(27) diff --git a/arch/arm/include/asm/xen/xen-ops.h b/arch/arm/include/asm/xen/xen-ops.h deleted file mode 100644 index ec154e719b11..000000000000 --- a/arch/arm/include/asm/xen/xen-ops.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_XEN_OPS_H -#define _ASM_XEN_OPS_H - -void xen_efi_runtime_setup(void); - -#endif /* _ASM_XEN_OPS_H */ diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 0440109e973b..b58a03b18bde 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -1,13 +1,13 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_MMP - bool "Marvell PXA168/910/MMP2" + bool "Marvell PXA168/910/MMP2/MMP3" depends on ARCH_MULTI_V5 || ARCH_MULTI_V7 select GPIO_PXA select GPIOLIB select PINCTRL select PLAT_PXA help - Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. + Support for Marvell's PXA168/PXA910(MMP), MMP2, and MMP3 processor lines. if ARCH_MMP @@ -129,6 +129,24 @@ config MACH_MMP2_DT Include support for Marvell MMP2 based platforms using the device tree. +config MACH_MMP3_DT + bool "Support MMP3 (ARMv7) platforms" + depends on ARCH_MULTI_V7 + select ARM_GIC + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select CACHE_L2X0 + select PINCTRL + select PINCTRL_SINGLE + select ARCH_HAS_RESET_CONTROLLER + select CPU_PJ4B + select PM_GENERIC_DOMAINS if PM + select PM_GENERIC_DOMAINS_OF if PM && OF + help + Say 'Y' here if you want to include support for platforms + with Marvell MMP3 processor, also known as PXA2128 or + Armada 620. + endmenu config CPU_PXA168 diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index 8f267c7bc6e8..7b3a7f979eec 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -22,6 +22,9 @@ ifeq ($(CONFIG_PM),y) obj-$(CONFIG_CPU_PXA910) += pm-pxa910.o obj-$(CONFIG_CPU_MMP2) += pm-mmp2.o endif +ifeq ($(CONFIG_SMP),y) +obj-$(CONFIG_MACH_MMP3_DT) += platsmp.o +endif # board support obj-$(CONFIG_MACH_ASPENITE) += aspenite.o @@ -34,5 +37,6 @@ obj-$(CONFIG_MACH_FLINT) += flint.o obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o obj-$(CONFIG_MACH_MMP_DT) += mmp-dt.o obj-$(CONFIG_MACH_MMP2_DT) += mmp2-dt.o +obj-$(CONFIG_MACH_MMP3_DT) += mmp3.o obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o obj-$(CONFIG_MACH_GPLUGD) += gplugd.o diff --git a/arch/arm/mach-mmp/addr-map.h b/arch/arm/mach-mmp/addr-map.h index 25edf6a92276..3dc2f0b0ecba 100644 --- a/arch/arm/mach-mmp/addr-map.h +++ b/arch/arm/mach-mmp/addr-map.h @@ -20,6 +20,10 @@ #define AXI_VIRT_BASE IOMEM(0xfe200000) #define AXI_PHYS_SIZE 0x00200000 +#define PGU_PHYS_BASE 0xe0000000 +#define PGU_VIRT_BASE IOMEM(0xfe400000) +#define PGU_PHYS_SIZE 0x00100000 + /* Static Memory Controller - Chip Select 0 and 1 */ #define SMC_CS0_PHYS_BASE 0x80000000 #define SMC_CS0_PHYS_SIZE 0x10000000 @@ -38,4 +42,7 @@ #define CIU_VIRT_BASE (AXI_VIRT_BASE + 0x82c00) #define CIU_REG(x) (CIU_VIRT_BASE + (x)) +#define SCU_VIRT_BASE (PGU_VIRT_BASE) +#define SCU_REG(x) (SCU_VIRT_BASE + (x)) + #endif /* __ASM_MACH_ADDR_MAP_H */ diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c index 6684abc7708b..e94349d4726c 100644 --- a/arch/arm/mach-mmp/common.c +++ b/arch/arm/mach-mmp/common.c @@ -13,11 +13,11 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include "addr-map.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "common.h" -#define MMP_CHIPID (AXI_VIRT_BASE + 0x82c00) +#define MMP_CHIPID CIU_REG(0x00) unsigned int mmp_chip_id; EXPORT_SYMBOL(mmp_chip_id); @@ -36,6 +36,15 @@ static struct map_desc standard_io_desc[] __initdata = { }, }; +static struct map_desc mmp2_io_desc[] __initdata = { + { + .pfn = __phys_to_pfn(PGU_PHYS_BASE), + .virtual = (unsigned long)PGU_VIRT_BASE, + .length = PGU_PHYS_SIZE, + .type = MT_DEVICE, + }, +}; + void __init mmp_map_io(void) { iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); @@ -44,6 +53,12 @@ void __init mmp_map_io(void) mmp_chip_id = __raw_readl(MMP_CHIPID); } +void __init mmp2_map_io(void) +{ + mmp_map_io(); + iotable_init(mmp2_io_desc, ARRAY_SIZE(mmp2_io_desc)); +} + void mmp_restart(enum reboot_mode mode, const char *cmd) { soft_restart(0); diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h index 483b8b6d3005..ed56b3f15b45 100644 --- a/arch/arm/mach-mmp/common.h +++ b/arch/arm/mach-mmp/common.h @@ -5,4 +5,5 @@ extern void mmp_timer_init(int irq, unsigned long rate); extern void __init mmp_map_io(void); +extern void __init mmp2_map_io(void); extern void mmp_restart(enum reboot_mode, const char *); diff --git a/arch/arm/mach-mmp/cputype.h b/arch/arm/mach-mmp/cputype.h deleted file mode 100644 index a96abcf521b4..000000000000 --- a/arch/arm/mach-mmp/cputype.h +++ /dev/null @@ -1,58 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_MACH_CPUTYPE_H -#define __ASM_MACH_CPUTYPE_H - -#include <asm/cputype.h> - -/* - * CPU Stepping CPU_ID CHIP_ID - * - * PXA168 S0 0x56158400 0x0000C910 - * PXA168 A0 0x56158400 0x00A0A168 - * PXA910 Y1 0x56158400 0x00F2C920 - * PXA910 A0 0x56158400 0x00F2C910 - * PXA910 A1 0x56158400 0x00A0C910 - * PXA920 Y0 0x56158400 0x00F2C920 - * PXA920 A0 0x56158400 0x00A0C920 - * PXA920 A1 0x56158400 0x00A1C920 - * MMP2 Z0 0x560f5811 0x00F00410 - * MMP2 Z1 0x560f5811 0x00E00410 - * MMP2 A0 0x560f5811 0x00A0A610 - */ - -extern unsigned int mmp_chip_id; - -#ifdef CONFIG_CPU_PXA168 -static inline int cpu_is_pxa168(void) -{ - return (((read_cpuid_id() >> 8) & 0xff) == 0x84) && - ((mmp_chip_id & 0xfff) == 0x168); -} -#else -#define cpu_is_pxa168() (0) -#endif - -/* cpu_is_pxa910() is shared on both pxa910 and pxa920 */ -#ifdef CONFIG_CPU_PXA910 -static inline int cpu_is_pxa910(void) -{ - return (((read_cpuid_id() >> 8) & 0xff) == 0x84) && - (((mmp_chip_id & 0xfff) == 0x910) || - ((mmp_chip_id & 0xfff) == 0x920)); -} -#else -#define cpu_is_pxa910() (0) -#endif - -#if defined(CONFIG_CPU_MMP2) || defined(CONFIG_MACH_MMP2_DT) -static inline int cpu_is_mmp2(void) -{ - return (((read_cpuid_id() >> 8) & 0xff) == 0x58) && - (((mmp_chip_id & 0xfff) == 0x410) || - ((mmp_chip_id & 0xfff) == 0x610)); -} -#else -#define cpu_is_mmp2() (0) -#endif - -#endif /* __ASM_MACH_CPUTYPE_H */ diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c index 130c1a603ba2..18bee66a671f 100644 --- a/arch/arm/mach-mmp/devices.c +++ b/arch/arm/mach-mmp/devices.c @@ -11,7 +11,7 @@ #include <asm/irq.h> #include "irqs.h" #include "devices.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "regs-usb.h" int __init pxa_register_device(struct pxa_device_desc *desc, diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c index 35559792d5cc..91214996acec 100644 --- a/arch/arm/mach-mmp/mmp-dt.c +++ b/arch/arm/mach-mmp/mmp-dt.c @@ -9,14 +9,13 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> #include <linux/clk-provider.h> +#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/hardware/cache-tauros2.h> #include "common.h" -extern void __init mmp_dt_init_timer(void); - static const char *const pxa168_dt_board_compat[] __initconst = { "mrvl,pxa168-aspenite", NULL, @@ -32,8 +31,8 @@ static void __init mmp_init_time(void) #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif - mmp_dt_init_timer(); of_clk_init(NULL); + timer_probe(); } DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)") diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c index 305a9daba6d6..510c762ddc48 100644 --- a/arch/arm/mach-mmp/mmp2-dt.c +++ b/arch/arm/mach-mmp/mmp2-dt.c @@ -10,21 +10,20 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> #include <linux/clk-provider.h> +#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/hardware/cache-tauros2.h> #include "common.h" -extern void __init mmp_dt_init_timer(void); - static void __init mmp_init_time(void) { #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif of_clk_init(NULL); - mmp_dt_init_timer(); + timer_probe(); } static const char *const mmp2_dt_board_compat[] __initconst = { @@ -33,7 +32,7 @@ static const char *const mmp2_dt_board_compat[] __initconst = { }; DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)") - .map_io = mmp_map_io, + .map_io = mmp2_map_io, .init_time = mmp_init_time, .dt_compat = mmp2_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 18ea3e1a26e6..bbc4c2274de3 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -20,7 +20,7 @@ #include <asm/mach/time.h> #include "addr-map.h" #include "regs-apbc.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "irqs.h" #include "mfp.h" #include "devices.h" diff --git a/arch/arm/mach-mmp/mmp3.c b/arch/arm/mach-mmp/mmp3.c new file mode 100644 index 000000000000..b0e86964f302 --- /dev/null +++ b/arch/arm/mach-mmp/mmp3.c @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Marvell MMP3 aka PXA2128 aka 88AP2128 support + * + * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> + */ + +#include <linux/io.h> +#include <linux/irqchip.h> +#include <linux/of_platform.h> +#include <linux/clk-provider.h> +#include <asm/mach/arch.h> +#include <asm/hardware/cache-l2x0.h> + +#include "common.h" + +static const char *const mmp3_dt_board_compat[] __initconst = { + "marvell,mmp3", + NULL, +}; + +DT_MACHINE_START(MMP2_DT, "Marvell MMP3") + .map_io = mmp2_map_io, + .dt_compat = mmp3_dt_board_compat, + .l2c_aux_val = 1 << L310_AUX_CTRL_FWA_SHIFT | + L310_AUX_CTRL_DATA_PREFETCH | + L310_AUX_CTRL_INSTR_PREFETCH, + .l2c_aux_mask = 0xc20fffff, +MACHINE_END diff --git a/arch/arm/mach-mmp/platsmp.c b/arch/arm/mach-mmp/platsmp.c new file mode 100644 index 000000000000..c99405469bb4 --- /dev/null +++ b/arch/arm/mach-mmp/platsmp.c @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> + */ +#include <linux/io.h> +#include <asm/smp_scu.h> +#include <asm/smp.h> +#include "addr-map.h" + +#define SW_BRANCH_VIRT_ADDR CIU_REG(0x24) + +static int mmp3_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + /* + * Apparently, the boot ROM on the second core spins on this + * register becoming non-zero and then jumps to the address written + * there. No IPIs involved. + */ + __raw_writel(__pa_symbol(secondary_startup), SW_BRANCH_VIRT_ADDR); + return 0; +} + +static void mmp3_smp_prepare_cpus(unsigned int max_cpus) +{ + scu_enable(SCU_VIRT_BASE); +} + +static const struct smp_operations mmp3_smp_ops __initconst = { + .smp_prepare_cpus = mmp3_smp_prepare_cpus, + .smp_boot_secondary = mmp3_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(mmp3_smp, "marvell,mmp3-smp", &mmp3_smp_ops); diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c index 2923dd5732a6..2d86381e152d 100644 --- a/arch/arm/mach-mmp/pm-mmp2.c +++ b/arch/arm/mach-mmp/pm-mmp2.c @@ -17,7 +17,7 @@ #include <linux/interrupt.h> #include <asm/mach-types.h> -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "addr-map.h" #include "pm-mmp2.h" #include "regs-icu.h" diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c index 58535ce206dc..69ebe18ff209 100644 --- a/arch/arm/mach-mmp/pm-pxa910.c +++ b/arch/arm/mach-mmp/pm-pxa910.c @@ -18,7 +18,7 @@ #include <asm/mach-types.h> #include <asm/outercache.h> -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "addr-map.h" #include "pm-pxa910.h" #include "regs-icu.h" diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 6e0277488967..b642e900727a 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -21,7 +21,7 @@ #include "addr-map.h" #include "clock.h" #include "common.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "devices.h" #include "irqs.h" #include "mfp.h" diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index cba31c758dea..b19a069d9fab 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -18,7 +18,7 @@ #include <asm/mach/time.h> #include "addr-map.h" #include "regs-apbc.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "irqs.h" #include "mfp.h" #include "devices.h" diff --git a/arch/arm/mach-mmp/regs-usb.h b/arch/arm/mach-mmp/regs-usb.h index d9f08c160154..ed0d1aa0ad6c 100644 --- a/arch/arm/mach-mmp/regs-usb.h +++ b/arch/arm/mach-mmp/regs-usb.h @@ -121,100 +121,6 @@ #define UTMI_OTG_ADDON_OTG_ON (1 << 0) -/* For MMP3 USB Phy */ -#define USB2_PLL_REG0 0x4 -#define USB2_PLL_REG1 0x8 -#define USB2_TX_REG0 0x10 -#define USB2_TX_REG1 0x14 -#define USB2_TX_REG2 0x18 -#define USB2_RX_REG0 0x20 -#define USB2_RX_REG1 0x24 -#define USB2_RX_REG2 0x28 -#define USB2_ANA_REG0 0x30 -#define USB2_ANA_REG1 0x34 -#define USB2_ANA_REG2 0x38 -#define USB2_DIG_REG0 0x3C -#define USB2_DIG_REG1 0x40 -#define USB2_DIG_REG2 0x44 -#define USB2_DIG_REG3 0x48 -#define USB2_TEST_REG0 0x4C -#define USB2_TEST_REG1 0x50 -#define USB2_TEST_REG2 0x54 -#define USB2_CHARGER_REG0 0x58 -#define USB2_OTG_REG0 0x5C -#define USB2_PHY_MON0 0x60 -#define USB2_RESETVE_REG0 0x64 -#define USB2_ICID_REG0 0x78 -#define USB2_ICID_REG1 0x7C - -/* USB2_PLL_REG0 */ -/* This is for Ax stepping */ -#define USB2_PLL_FBDIV_SHIFT_MMP3 0 -#define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0) - -#define USB2_PLL_REFDIV_SHIFT_MMP3 8 -#define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8) - -#define USB2_PLL_VDD12_SHIFT_MMP3 12 -#define USB2_PLL_VDD18_SHIFT_MMP3 14 - -/* This is for B0 stepping */ -#define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0 -#define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9 -#define USB2_PLL_VDD18_SHIFT_MMP3_B0 14 -#define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF -#define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00 - -#define USB2_PLL_CAL12_SHIFT_MMP3 0 -#define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0) - -#define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2 - -#define USB2_PLL_KVCO_SHIFT_MMP3 4 -#define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4) - -#define USB2_PLL_ICP_SHIFT_MMP3 8 -#define USB2_PLL_ICP_MASK_MMP3 (0x7<<8) - -#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12 - -#define USB2_PLL_PU_PLL_SHIFT_MMP3 13 -#define USB2_PLL_PU_PLL_MASK (0x1 << 13) - -#define USB2_PLL_READY_MASK_MMP3 (0x1 << 15) - -/* USB2_TX_REG0 */ -#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8 -#define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8) - -#define USB2_TX_RCAL_START_SHIFT_MMP3 13 - -/* USB2_TX_REG1 */ -#define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0 -#define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0) - -#define USB2_TX_AMP_SHIFT_MMP3 4 -#define USB2_TX_AMP_MASK_MMP3 (0x7 << 4) - -#define USB2_TX_VDD12_SHIFT_MMP3 8 -#define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8) - -/* USB2_TX_REG2 */ -#define USB2_TX_DRV_SLEWRATE_SHIFT 10 - -/* USB2_RX_REG0 */ -#define USB2_RX_SQ_THRESH_SHIFT_MMP3 4 -#define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4) - -#define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10 -#define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10) - -/* USB2_ANA_REG1*/ -#define USB2_ANA_PU_ANA_SHIFT_MMP3 14 - -/* USB2_OTG_REG0 */ -#define USB2_OTG_PU_OTG_SHIFT_MMP3 3 - /* fsic registers */ #define FSIC_MISC 0x4 #define FSIC_INT 0x28 diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 483df32583be..110dcb3314d1 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -33,7 +33,7 @@ #include "regs-timers.h" #include "regs-apbc.h" #include "irqs.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "clock.h" #define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE @@ -155,7 +155,8 @@ static void __init timer_config(void) __raw_writel(0x0, mmp_timer_base + TMR_CER); /* disable */ - ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) : + ccr &= (cpu_is_mmp2() || cpu_is_mmp3()) ? + (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) : (TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3)); __raw_writel(ccr, mmp_timer_base + TMR_CCR); @@ -195,30 +196,17 @@ void __init mmp_timer_init(int irq, unsigned long rate) clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA); } -#ifdef CONFIG_OF -static const struct of_device_id mmp_timer_dt_ids[] = { - { .compatible = "mrvl,mmp-timer", }, - {} -}; - -void __init mmp_dt_init_timer(void) +static int __init mmp_dt_init_timer(struct device_node *np) { - struct device_node *np; struct clk *clk; int irq, ret; unsigned long rate; - np = of_find_matching_node(NULL, mmp_timer_dt_ids); - if (!np) { - ret = -ENODEV; - goto out; - } - clk = of_clk_get(np, 0); if (!IS_ERR(clk)) { ret = clk_prepare_enable(clk); if (ret) - goto out; + return ret; rate = clk_get_rate(clk) / 2; } else if (cpu_is_pj4()) { rate = 6500000; @@ -227,18 +215,15 @@ void __init mmp_dt_init_timer(void) } irq = irq_of_parse_and_map(np, 0); - if (!irq) { - ret = -EINVAL; - goto out; - } + if (!irq) + return -EINVAL; + mmp_timer_base = of_iomap(np, 0); - if (!mmp_timer_base) { - ret = -ENOMEM; - goto out; - } + if (!mmp_timer_base) + return -ENOMEM; + mmp_timer_init(irq, rate); - return; -out: - pr_err("Failed to get timer from device tree with error:%d\n", ret); + return 0; } -#endif + +TIMER_OF_DECLARE(mmp_timer, "mrvl,mmp-timer", mmp_dt_init_timer); diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index dd939e1325c6..29fd13684a68 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -763,7 +763,8 @@ static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_RESET_STATUS, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP), .sysc_fields = &omap_hwmod_sysc_type2, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 2bcb6345b873..54524775f278 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -231,8 +231,9 @@ static struct omap_hwmod am33xx_control_hwmod = { static struct omap_hwmod_class_sysconfig lcdc_sysc = { .rev_offs = 0x0, .sysc_offs = 0x54, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE, + .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART, .sysc_fields = &omap_hwmod_sysc_type2, }; diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1fde1bf53fb6..7ac9af56762d 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -74,83 +74,6 @@ int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) return 0; } -/* - * This API is to be called during init to set the various voltage - * domains to the voltage as per the opp table. Typically we boot up - * at the nominal voltage. So this function finds out the rate of - * the clock associated with the voltage domain, finds out the correct - * opp entry and sets the voltage domain to the voltage specified - * in the opp entry - */ -static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, - const char *oh_name) -{ - struct voltagedomain *voltdm; - struct clk *clk; - struct dev_pm_opp *opp; - unsigned long freq, bootup_volt; - struct device *dev; - - if (!vdd_name || !clk_name || !oh_name) { - pr_err("%s: invalid parameters\n", __func__); - goto exit; - } - - if (!strncmp(oh_name, "mpu", 3)) - /* - * All current OMAPs share voltage rail and clock - * source, so CPU0 is used to represent the MPU-SS. - */ - dev = get_cpu_device(0); - else - dev = omap_device_get_by_hwmod_name(oh_name); - - if (IS_ERR(dev)) { - pr_err("%s: Unable to get dev pointer for hwmod %s\n", - __func__, oh_name); - goto exit; - } - - voltdm = voltdm_lookup(vdd_name); - if (!voltdm) { - pr_err("%s: unable to get vdd pointer for vdd_%s\n", - __func__, vdd_name); - goto exit; - } - - clk = clk_get(NULL, clk_name); - if (IS_ERR(clk)) { - pr_err("%s: unable to get clk %s\n", __func__, clk_name); - goto exit; - } - - freq = clk_get_rate(clk); - clk_put(clk); - - opp = dev_pm_opp_find_freq_ceil(dev, &freq); - if (IS_ERR(opp)) { - pr_err("%s: unable to find boot up OPP for vdd_%s\n", - __func__, vdd_name); - goto exit; - } - - bootup_volt = dev_pm_opp_get_voltage(opp); - dev_pm_opp_put(opp); - - if (!bootup_volt) { - pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n", - __func__, vdd_name); - goto exit; - } - - voltdm_scale(voltdm, bootup_volt); - return 0; - -exit: - pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name); - return -EINVAL; -} - #ifdef CONFIG_SUSPEND static int omap_pm_enter(suspend_state_t suspend_state) { @@ -208,25 +131,6 @@ void omap_common_suspend_init(void *pm_suspend) } #endif /* CONFIG_SUSPEND */ -static void __init omap3_init_voltages(void) -{ - if (!soc_is_omap34xx()) - return; - - omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu"); - omap2_set_init_voltage("core", "l3_ick", "l3_main"); -} - -static void __init omap4_init_voltages(void) -{ - if (!soc_is_omap44xx()) - return; - - omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu"); - omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1"); - omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva"); -} - int __maybe_unused omap_pm_nop_init(void) { return 0; @@ -246,10 +150,6 @@ int __init omap2_common_pm_late_init(void) omap4_twl_init(); omap_voltage_late_init(); - /* Initialize the voltages */ - omap3_init_voltages(); - omap4_init_voltages(); - /* Smartreflex device init */ omap_devinit_smartreflex(); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 0ab3a86b1f52..da31f223242a 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -1041,7 +1041,7 @@ endif config CACHE_TAUROS2 bool "Enable the Tauros2 L2 cache controller" - depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4) + depends on (CPU_MOHAWK || CPU_PJ4) default y select OUTER_CACHE help diff --git a/arch/arm/xen/Makefile b/arch/arm/xen/Makefile index 7ed28982c4c3..c32d04713ba0 100644 --- a/arch/arm/xen/Makefile +++ b/arch/arm/xen/Makefile @@ -1,3 +1,2 @@ # SPDX-License-Identifier: GPL-2.0-only obj-y := enlighten.o hypercall.o grant-table.o p2m.o mm.o -obj-$(CONFIG_XEN_EFI) += efi.o diff --git a/arch/arm/xen/efi.c b/arch/arm/xen/efi.c deleted file mode 100644 index d687a73044bf..000000000000 --- a/arch/arm/xen/efi.c +++ /dev/null @@ -1,28 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (c) 2015, Linaro Limited, Shannon Zhao - */ - -#include <linux/efi.h> -#include <xen/xen-ops.h> -#include <asm/xen/xen-ops.h> - -/* Set XEN EFI runtime services function pointers. Other fields of struct efi, - * e.g. efi.systab, will be set like normal EFI. - */ -void __init xen_efi_runtime_setup(void) -{ - efi.get_time = xen_efi_get_time; - efi.set_time = xen_efi_set_time; - efi.get_wakeup_time = xen_efi_get_wakeup_time; - efi.set_wakeup_time = xen_efi_set_wakeup_time; - efi.get_variable = xen_efi_get_variable; - efi.get_next_variable = xen_efi_get_next_variable; - efi.set_variable = xen_efi_set_variable; - efi.query_variable_info = xen_efi_query_variable_info; - efi.update_capsule = xen_efi_update_capsule; - efi.query_capsule_caps = xen_efi_query_capsule_caps; - efi.get_next_high_mono_count = xen_efi_get_next_high_mono_count; - efi.reset_system = xen_efi_reset_system; -} -EXPORT_SYMBOL_GPL(xen_efi_runtime_setup); diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 1e57692552d9..dd6804a64f1a 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -15,7 +15,6 @@ #include <xen/xen-ops.h> #include <asm/xen/hypervisor.h> #include <asm/xen/hypercall.h> -#include <asm/xen/xen-ops.h> #include <asm/system_misc.h> #include <asm/efi.h> #include <linux/interrupt.h> @@ -437,7 +436,7 @@ EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op); EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op); EXPORT_SYMBOL_GPL(HYPERVISOR_vcpu_op); EXPORT_SYMBOL_GPL(HYPERVISOR_tmem_op); -EXPORT_SYMBOL_GPL(HYPERVISOR_platform_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_platform_op_raw); EXPORT_SYMBOL_GPL(HYPERVISOR_multicall); EXPORT_SYMBOL_GPL(HYPERVISOR_vm_assist); EXPORT_SYMBOL_GPL(HYPERVISOR_dm_op); diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index 2b2c208408bb..38fa917c8585 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -28,7 +28,10 @@ unsigned long xen_get_swiotlb_free_pages(unsigned int order) for_each_memblock(memory, reg) { if (reg->base < (phys_addr_t)0xffffffff) { - flags |= __GFP_DMA; + if (IS_ENABLED(CONFIG_ZONE_DMA32)) + flags |= __GFP_DMA32; + else + flags |= __GFP_DMA; break; } } |
