diff options
Diffstat (limited to 'arch/arm')
100 files changed, 1825 insertions, 4057 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d57c1a65b24f..fc37bca0ccd3 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -173,12 +173,17 @@ dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \ nspire-tp.dtb \ nspire-clp.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ + omap2430-sdp.dtb \ + omap2420-n800.dtb \ + omap2420-n810.dtb \ + omap2420-n810-wimax.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ omap3-devkit8000.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ + omap3-ldp.dtb \ omap3-n900.dtb \ omap3-n9.dtb \ omap3-n950.dtb \ diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index b4f95c2bbf74..72a9b3fc4251 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -13,4 +13,83 @@ / { model = "IGEP COM AM335x on AQUILA Expansion"; compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx"; + + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_pins>; + pinctrl-1 = <&nxp_hdmi_off_pins>; + status = "okay"; + }; + + leds_base { + pinctrl-names = "default"; + pinctrl-0 = <&leds_base_pins>; + + compatible = "gpio-leds"; + + led@0 { + label = "base:red:user"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */ + default-state = "off"; + }; + + led@1 { + label = "base:green:user"; + gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */ + default-state = "off"; + }; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_pins: pinmux_nxp_hdmi_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ + >; + }; + nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + >; + }; + + leds_base_pins: pinmux_leds_base_pins { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ + >; + }; +}; + +&lcdc { + status = "okay"; +}; + +&i2c0 { + eeprom: eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + }; }; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 619624479311..7063311a58d9 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -199,6 +199,35 @@ pinctrl-0 = <&uart0_pins>; }; +&usb { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; +}; + #include "tps65910.dtsi" &tps { diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index e99dfaf70052..b4127c6493a2 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -7,16 +7,31 @@ */ /dts-v1/; -#include "omap34xx.dtsi" +#include "am3517.dtsi" / { - model = "TI AM3517 EVM (AM3517/05)"; - compatible = "ti,am3517-evm", "ti,omap3"; + model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)"; + compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3"; memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + vmmc_fixed: vmmc { + compatible = "regulator-fixed"; + regulator-name = "vmmc_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&davinci_emac { + status = "okay"; +}; + +&davinci_mdio { + status = "okay"; }; &i2c1 { @@ -30,3 +45,17 @@ &i2c3 { clock-frequency = <400000>; }; + +&mmc1 { + vmmc-supply = <&vmmc_fixed>; + bus-width = <4>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi new file mode 100644 index 000000000000..2fbe02faa8b1 --- /dev/null +++ b/arch/arm/boot/dts/am3517.dtsi @@ -0,0 +1,63 @@ +/* + * Device Tree Source for am3517 SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "omap3.dtsi" + +/ { + aliases { + serial3 = &uart4; + }; + + ocp { + am35x_otg_hs: am35x_otg_hs@5c040000 { + compatible = "ti,omap3-musb"; + ti,hwmods = "am35x_otg_hs"; + status = "disabled"; + reg = <0x5c040000 0x1000>; + interrupts = <71>; + interrupt-names = "mc"; + }; + + davinci_emac: ethernet@0x5c000000 { + compatible = "ti,am3517-emac"; + ti,hwmods = "davinci_emac"; + status = "disabled"; + reg = <0x5c000000 0x30000>; + interrupts = <67 68 69 70>; + ti,davinci-ctrl-reg-offset = <0x10000>; + ti,davinci-ctrl-mod-reg-offset = <0>; + ti,davinci-ctrl-ram-offset = <0x20000>; + ti,davinci-ctrl-ram-size = <0x2000>; + ti,davinci-rmii-en = /bits/ 8 <1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + davinci_mdio: ethernet@0x5c030000 { + compatible = "ti,davinci_mdio"; + ti,hwmods = "davinci_mdio"; + status = "disabled"; + reg = <0x5c030000 0x1000>; + bus_freq = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + uart4: serial@4809e000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + status = "disabled"; + reg = <0x4809e000 0x400>; + interrupts = <84>; + dmas = <&sdma 55 &sdma 54>; + dma-names = "tx", "rx"; + clock-frequency = <48000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 90ce29dbe119..08a56bcfc724 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -99,22 +99,22 @@ spi-max-frequency = <50000000>; }; }; + }; - pcie-controller { + pcie-controller { + status = "okay"; + /* + * The two PCIe units are accessible through + * both standard PCIe slots and mini-PCIe + * slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 1, Lane 0 */ status = "okay"; - /* - * The two PCIe units are accessible through - * both standard PCIe slots and mini-PCIe - * slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 00d6a798c705..7f10f627ae5b 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -118,7 +118,7 @@ coherency-fabric@20200 { compatible = "marvell,coherency-fabric"; - reg = <0x20200 0xb0>, <0x21810 0x1c>; + reg = <0x20200 0xb0>, <0x21010 0x1c>; }; serial@12000 { diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 3f5e6121c730..98335fb34b7a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -47,7 +47,7 @@ /* * MV78230 has 2 PCIe units Gen2.0: One unit can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x1 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -62,10 +62,10 @@ ranges = <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ @@ -74,8 +74,8 @@ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ - 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ - 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; pcie@1,0 { device_type = "pci"; @@ -145,20 +145,20 @@ status = "disabled"; }; - pcie@9,0 { + pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 - 0x81000000 0 0 0x81000000 0x9 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; + clocks = <&gateclk 9>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 3e9fd1353f89..66609684d41b 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -48,7 +48,7 @@ /* * MV78260 has 3 PCIe units Gen2.0: Two units can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x4 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -68,7 +68,9 @@ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ @@ -77,10 +79,18 @@ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ - 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ - 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ - 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ - 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ + 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ + 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ + 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ + 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ + 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ + + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; pcie@1,0 { device_type = "pci"; @@ -106,8 +116,8 @@ #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 - 0x81000000 0 0 0x81000000 0x2 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 59>; marvell,pcie-port = <0>; @@ -150,37 +160,88 @@ status = "disabled"; }; - pcie@9,0 { + pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 - 0x81000000 0 0 0x81000000 0x9 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; + clocks = <&gateclk 9>; status = "disabled"; }; - pcie@10,0 { + pcie@6,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 - 0x81000000 0 0 0x81000000 0xa 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 + 0x81000000 0 0 0x81000000 0x6 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 + 0x81000000 0 0 0x81000000 0x7 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 + 0x81000000 0 0 0x81000000 0x8 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; + clocks = <&gateclk 26>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index 2347e9563cef..6801106fa1f8 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -11,6 +11,10 @@ #include <dt-bindings/interrupt-controller/irq.h> / { + aliases { + serial4 = &usart3; + }; + ahb { apb { pinctrl@fffff400 { diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 1e12aeff403b..aa537ed13f0a 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -85,6 +85,8 @@ reg = <0x7e205000 0x1000>; interrupts = <2 21>; clocks = <&clk_i2c>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -93,6 +95,8 @@ reg = <0x7e804000 0x1000>; interrupts = <2 21>; clocks = <&clk_i2c>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index dc259e8b8a73..9b186ac06c8b 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -27,6 +27,13 @@ i2c2_bus: i2c2-bus { samsung,pin-pud = <0>; }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; i2c@12C60000 { @@ -35,6 +42,11 @@ max77686@09 { compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + wakeup-source; reg = <0x09>; voltage-regulators { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 59154dc15fe4..fb28b2ecb1db 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -161,7 +161,7 @@ clocks = <&clks 197>, <&clks 3>, <&clks 197>, <&clks 107>, <&clks 0>, <&clks 118>, - <&clks 62>, <&clks 139>, + <&clks 0>, <&clks 139>, <&clks 0>; clock-names = "core", "rxtx0", "rxtx1", "rxtx2", diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi index 9c18adf788f7..f577b7df9a29 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -44,8 +44,8 @@ gpmc,wr-access-ns = <186>; gpmc,cycle2cycle-samecsen; gpmc,cycle2cycle-diffcsen; - vmmc-supply = <&vddvario>; - vmmc_aux-supply = <&vdd33a>; + vddvario-supply = <&vddvario>; + vdd33a-supply = <&vdd33a>; reg-io-width = <4>; smsc,save-mac-address; }; diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi index b0ee342598f0..68221fab978d 100644 --- a/arch/arm/boot/dts/omap-zoom-common.dtsi +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -13,7 +13,7 @@ * they probably share the same GPIO IRQ * REVISIT: Add timing support from slls644g.pdf */ - 8250@3,0 { + uart@3,0 { compatible = "ns16550a"; reg = <3 0 0x100>; bank-width = <2>; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index a2bfcde858a6..d0c5b37e248c 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -9,6 +9,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/omap.h> #include "skeleton.dtsi" @@ -21,6 +22,8 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; + i2c0 = &i2c1; + i2c1 = &i2c2; }; cpus { @@ -53,6 +56,28 @@ ranges; ti,hwmods = "l3_main"; + aes: aes@480a6000 { + compatible = "ti,omap2-aes"; + ti,hwmods = "aes"; + reg = <0x480a6000 0x50>; + dmas = <&sdma 9 &sdma 10>; + dma-names = "tx", "rx"; + }; + + hdq1w: 1w@480b2000 { + compatible = "ti,omap2420-1w"; + ti,hwmods = "hdq1w"; + reg = <0x480b2000 0x1000>; + interrupts = <58>; + }; + + mailbox: mailbox@48094000 { + compatible = "ti,omap2-mailbox"; + ti,hwmods = "mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + }; + intc: interrupt-controller@1 { compatible = "ti,omap2-intc"; interrupt-controller; @@ -63,6 +88,7 @@ sdma: dma-controller@48056000 { compatible = "ti,omap2430-sdma", "ti,omap2420-sdma"; + ti,hwmods = "dma"; reg = <0x48056000 0x1000>; interrupts = <12>, <13>, @@ -73,21 +99,91 @@ #dma-requests = <64>; }; + i2c1: i2c@48070000 { + compatible = "ti,omap2-i2c"; + ti,hwmods = "i2c1"; + reg = <0x48070000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <56>; + dmas = <&sdma 27 &sdma 28>; + dma-names = "tx", "rx"; + }; + + i2c2: i2c@48072000 { + compatible = "ti,omap2-i2c"; + ti,hwmods = "i2c2"; + reg = <0x48072000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <57>; + dmas = <&sdma 29 &sdma 30>; + dma-names = "tx", "rx"; + }; + + mcspi1: mcspi@48098000 { + compatible = "ti,omap2-mcspi"; + ti,hwmods = "mcspi1"; + reg = <0x48098000 0x100>; + interrupts = <65>; + dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38 + &sdma 39 &sdma 40 &sdma 41 &sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + + mcspi2: mcspi@4809a000 { + compatible = "ti,omap2-mcspi"; + ti,hwmods = "mcspi2"; + reg = <0x4809a000 0x100>; + interrupts = <66>; + dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + rng: rng@480a0000 { + compatible = "ti,omap2-rng"; + ti,hwmods = "rng"; + reg = <0x480a0000 0x50>; + interrupts = <36>; + }; + + sham: sham@480a4000 { + compatible = "ti,omap2-sham"; + ti,hwmods = "sham"; + reg = <0x480a4000 0x64>; + interrupts = <51>; + dmas = <&sdma 13>; + dma-names = "rx"; + }; + uart1: serial@4806a000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart1"; + reg = <0x4806a000 0x2000>; + interrupts = <72>; + dmas = <&sdma 49 &sdma 50>; + dma-names = "tx", "rx"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart2"; + reg = <0x4806c000 0x400>; + interrupts = <73>; + dmas = <&sdma 51 &sdma 52>; + dma-names = "tx", "rx"; clock-frequency = <48000000>; }; uart3: serial@4806e000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart3"; + reg = <0x4806e000 0x400>; + interrupts = <74>; + dmas = <&sdma 53 &sdma 54>; + dma-names = "tx", "rx"; clock-frequency = <48000000>; }; diff --git a/arch/arm/boot/dts/omap2420-n800.dts b/arch/arm/boot/dts/omap2420-n800.dts new file mode 100644 index 000000000000..d8c1b423606a --- /dev/null +++ b/arch/arm/boot/dts/omap2420-n800.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "omap2420-n8x0-common.dtsi" + +/ { + model = "Nokia N800"; + compatible = "nokia,n800", "nokia,n8x0", "ti,omap2420", "ti,omap2"; +}; diff --git a/arch/arm/boot/dts/omap2420-n810-wimax.dts b/arch/arm/boot/dts/omap2420-n810-wimax.dts new file mode 100644 index 000000000000..6b25b0359ac9 --- /dev/null +++ b/arch/arm/boot/dts/omap2420-n810-wimax.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "omap2420-n8x0-common.dtsi" + +/ { + model = "Nokia N810 WiMax"; + compatible = "nokia,n810-wimax", "nokia,n8x0", "ti,omap2420", "ti,omap2"; +}; diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts new file mode 100644 index 000000000000..21baec154b78 --- /dev/null +++ b/arch/arm/boot/dts/omap2420-n810.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "omap2420-n8x0-common.dtsi" + +/ { + model = "Nokia N810"; + compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2"; +}; diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi new file mode 100644 index 000000000000..89608b206519 --- /dev/null +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi @@ -0,0 +1,99 @@ +#include "omap2420.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x80000000 0x8000000>; /* 128 MB */ + }; + + ocp { + i2c@0 { + compatible = "i2c-cbus-gpio"; + gpios = <&gpio3 2 0 /* gpio66 clk */ + &gpio3 1 0 /* gpio65 dat */ + &gpio3 0 0 /* gpio64 sel */ + >; + #address-cells = <1>; + #size-cells = <0>; + retu_mfd: retu@1 { + compatible = "retu-mfd"; + interrupt-parent = <&gpio4>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + reg = <0x1>; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&gpmc { + ranges = <0 0 0x04000000 0x10000000>; + + /* gpio-irq for dma: 26 */ + + onenand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x10000000>; + + gpmc,sync-read; + gpmc,burst-length = <16>; + gpmc,burst-read; + gpmc,burst-wrap; + gpmc,device-width = <2>; + gpmc,mux-add-data = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <127>; + gpmc,cs-wr-off-ns = <109>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <18>; + gpmc,adv-wr-off-ns = <18>; + gpmc,oe-on-ns = <27>; + gpmc,oe-off-ns = <127>; + gpmc,we-on-ns = <27>; + gpmc,we-off-ns = <72>; + gpmc,rd-cycle-ns = <145>; + gpmc,wr-cycle-ns = <136>; + gpmc,access-ns = <118>; + gpmc,page-burst-access-ns = <27>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <9>; + gpmc,sync-clk-ps = <27000>; + + /* MTD partition table corresponding to old board-n8x0 file. */ + partition@0 { + label = "bootloader"; + reg = <0x00000000 0x00020000>; + read-only; + }; + partition@1 { + label = "config"; + reg = <0x00020000 0x00060000>; + }; + partition@2 { + label = "kernel"; + reg = <0x00080000 0x00200000>; + }; + partition@3 { + label = "initfs"; + reg = <0x00280000 0x00400000>; + }; + partition@4 { + label = "rootfs"; + reg = <0x00680000 0x0f980000>; + }; + partition@5 { + label = "omap2-onenand"; + reg = <0x00000000 0x10000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index c8f9c55169ea..60c605de22dd 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -114,6 +114,15 @@ dma-names = "tx", "rx"; }; + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + timer1: timer@48028000 { compatible = "ti,omap2420-timer"; reg = <0x48028000 0x400>; @@ -121,5 +130,19 @@ ti,hwmods = "timer1"; ti,timer-alwon; }; + + wd_timer2: wdt@48022000 { + compatible = "ti,omap2-wdt"; + ti,hwmods = "wd_timer2"; + reg = <0x48022000 0x80>; + }; }; }; + +&i2c1 { + compatible = "ti,omap2420-i2c"; +}; + +&i2c2 { + compatible = "ti,omap2420-i2c"; +}; diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts new file mode 100644 index 000000000000..2c90d29b4cad --- /dev/null +++ b/arch/arm/boot/dts/omap2430-sdp.dts @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap2430.dtsi" + +/ { + model = "TI OMAP2430 SDP"; + compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x8000000>; /* 128 MB */ + }; +}; + +&i2c2 { + clock-frequency = <100000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + }; +}; + +#include "twl4030.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + bus-width = <4>; +}; + +&gpmc { + ranges = <5 0 0x08000000 0x01000000>; + ethernet@gpmc { + compatible = "smsc,lan91c94"; + interrupt-parent = <&gpio5>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */ + reg = <5 0x300 0xf>; + bank-width = <2>; + gpmc,mux-add-data; + }; +}; + diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index c535a5a2b27f..d624345666f5 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -175,6 +175,25 @@ dma-names = "tx", "rx"; }; + mmc1: mmc@4809c000 { + compatible = "ti,omap2-hsmmc"; + reg = <0x4809c000 0x200>; + interrupts = <83>; + ti,hwmods = "mmc1"; + ti,dual-volt; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap2-hsmmc"; + reg = <0x480b4000 0x200>; + interrupts = <86>; + ti,hwmods = "mmc2"; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + }; + timer1: timer@49018000 { compatible = "ti,omap2420-timer"; reg = <0x49018000 0x400>; @@ -182,5 +201,35 @@ ti,hwmods = "timer1"; ti,timer-alwon; }; + + mcspi3: mcspi@480b8000 { + compatible = "ti,omap2-mcspi"; + ti,hwmods = "mcspi3"; + reg = <0x480b8000 0x100>; + interrupts = <91>; + dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + usb_otg_hs: usb_otg_hs@480ac000 { + compatible = "ti,omap2-musb"; + ti,hwmods = "usb_otg_hs"; + reg = <0x480ac000 0x1000>; + interrupts = <93>; + }; + + wd_timer2: wdt@49016000 { + compatible = "ti,omap2-wdt"; + ti,hwmods = "wd_timer2"; + reg = <0x49016000 0x80>; + }; }; }; + +&i2c1 { + compatible = "ti,omap2430-i2c"; +}; + +&i2c2 { + compatible = "ti,omap2430-i2c"; +}; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 31a632f7effb..df33a50bc070 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -215,3 +215,10 @@ &usbhsehci { phys = <0 &hsusb2_phy>; }; + +&vaux2 { + regulator-name = "usb_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index fa532aaacc68..3ba4a625ea5b 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -61,6 +61,14 @@ vcc-supply = <&hsusb2_power>; }; + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; + gpio_keys { compatible = "gpio-keys"; @@ -120,6 +128,12 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; }; }; @@ -178,3 +192,10 @@ mode = <3>; power = <50>; }; + +&vaux2 { + regulator-name = "vdd_ehci"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index ba1e58b7b7e3..165aaf7591ba 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEP Technology devices + * Common device tree for IGEP boards based on AM/DM37x * * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> @@ -10,7 +10,7 @@ */ /dts-v1/; -#include "omap34xx.dtsi" +#include "omap36xx.dtsi" / { memory { @@ -24,6 +24,25 @@ ti,mcbsp = <&mcbsp2>; ti,codec = <&twl_audio>; }; + + vdd33: regulator-vdd33 { + compatible = "regulator-fixed"; + regulator-name = "vdd33"; + regulator-always-on; + }; + + lbee1usjyc_vmmc: lbee1usjyc_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&lbee1usjyc_pins>; + compatible = "regulator-fixed"; + regulator-name = "regulator-lbee1usjyc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */ + startup-delay-us = <10000>; + enable-active-high; + vin-supply = <&vdd33>; + }; }; &omap3_pmx_core { @@ -48,6 +67,15 @@ >; }; + /* WiFi/BT combo */ + lbee1usjyc_pins: pinmux_lbee1usjyc_pins { + pinctrl-single,pins = < + 0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */ + 0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ + 0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ + >; + }; + mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < 0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ @@ -65,10 +93,17 @@ 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - 0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ - 0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ - 0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ - 0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ >; }; @@ -78,10 +113,33 @@ >; }; + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */ + 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ + 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ + >; + }; + leds_pins: pinmux_leds_pins { }; }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <2600000>; twl: twl@48 { @@ -101,9 +159,16 @@ #include "twl4030_omap3.dtsi" &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + &mcbsp2 { pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; @@ -114,11 +179,15 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; - bus-width = <8>; + bus-width = <4>; }; &mmc2 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&lbee1usjyc_vmmc>; + bus-width = <4>; + non-removable; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index d5cc79267250..1c7e74d2d2bc 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEPv2 board + * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> @@ -13,7 +13,7 @@ #include "omap-gpmc-smsc911x.dtsi" / { - model = "IGEPv2"; + model = "IGEPv2 (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0020", "ti,omap3"; leds { @@ -67,6 +67,8 @@ pinctrl-names = "default"; pinctrl-0 = < &hsusbb1_pins + &tfp410_pins + &dss_pins >; hsusbb1_pins: pinmux_hsusbb1_pins { @@ -85,6 +87,45 @@ 0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */ >; }; + + tfp410_pins: tfp410_dvi_pins { + pinctrl-single,pins = < + 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ + >; + }; + + dss_pins: pinmux_dss_dvi_pins { + pinctrl-single,pins = < + 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; }; &leds_pins { @@ -174,3 +215,8 @@ &usbhsehci { phys = <&hsusb1_phy>; }; + +&vpll2 { + /* Needed for DSS */ + regulator-name = "vdds_dsi"; +}; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 525e6d9b0978..02a23f8a3384 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEP COM Module + * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> @@ -12,7 +12,7 @@ #include "omap3-igep.dtsi" / { - model = "IGEP COM Module"; + model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0030", "ti,omap3"; leds { diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts new file mode 100644 index 000000000000..ddce0d807f70 --- /dev/null +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -0,0 +1,231 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap34xx.dtsi" +#include "omap-gpmc-smsc911x.dtsi" + +/ { + model = "TI OMAP3430 LDP (Zoom1 Labrador)"; + compatible = "ti,omap3-ldp", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x8000000>; /* 128 MB */ + }; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_pins>; + + key_enter { + label = "enter"; + gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */ + linux,code = <0x0107001c>; /* KEY_ENTER */ + gpio-key,wakeup; + }; + + key_f1 { + label = "f1"; + gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */ + linux,code = <0x0303003b>; /* KEY_F1 */ + gpio-key,wakeup; + }; + + key_f2 { + label = "f2"; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */ + linux,code = <0x0403003c>; /* KEY_F2 */ + gpio-key,wakeup; + }; + + key_f3 { + label = "f3"; + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */ + linux,code = <0x0503003d>; /* KEY_F3 */ + gpio-key,wakeup; + }; + + key_f4 { + label = "f4"; + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */ + linux,code = <0x0704003e>; /* KEY_F4 */ + gpio-key,wakeup; + }; + + key_left { + label = "left"; + gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */ + linux,code = <0x04070069>; /* KEY_LEFT */ + gpio-key,wakeup; + }; + + key_right { + label = "right"; + gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */ + linux,code = <0x0507006a>; /* KEY_RIGHT */ + gpio-key,wakeup; + }; + + key_up { + label = "up"; + gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */ + linux,code = <0x06070067>; /* KEY_UP */ + gpio-key,wakeup; + }; + + key_down { + label = "down"; + gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */ + linux,code = <0x0707006c>; /* KEY_DOWN */ + gpio-key,wakeup; + }; + }; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x01000000>, + <1 0 0x08000000 0x01000000>; + + nand@0,0 { + linux,mtd-name= "micron,nand"; + reg = <0 0 0>; + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@80000 { + label = "U-Boot"; + reg = <0x80000 0x140000>; + }; + partition@1c0000 { + label = "Environment"; + reg = <0x1c0000 0x40000>; + }; + partition@200000 { + label = "Kernel"; + reg = <0x200000 0x1e00000>; + }; + partition@2000000 { + label = "Filesystem"; + reg = <0x2000000 0xe000000>; + }; + }; + + ethernet@gpmc { + interrupt-parent = <&gpio5>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + reg = <1 0 0xff>; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; +}; + +&mmc1 { + vmmc-supply = <&vmmc1>; + bus-width = <4>; +}; + +&omap3_pmx_core { + gpio_key_pins: pinmux_gpio_key_pins { + pinctrl-single,pins = < + 0xea (PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */ + 0xec (PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */ + 0xee (PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */ + 0xf0 (PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */ + 0xf2 (PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */ + 0xf4 (PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */ + 0xf6 (PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */ + 0xf8 (PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */ + 0xfa (PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */ + >; + }; + + musb_pins: pinmux_musb_pins { + pinctrl-single,pins = < + 0x172 (PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ + 0x17a (PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ + 0x17c (PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ + 0x17e (PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ + 0x180 (PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ + 0x182 (PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ + 0x184 (PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ + 0x186 (PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ + 0x188 (PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ + 0x176 (PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ + 0x178 (PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ + 0x174 (PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ + >; + }; +}; + +&usb_otg_hs { + pinctrl-names = "default"; + pinctrl-0 = <&musb_pins>; + interface-type = <0>; + usb-phy = <&usb2_phy>; + mode = <3>; + power = <50>; +}; + +&vaux1 { + /* Needed for ads7846 */ + regulator-name = "vcc"; +}; + +&vpll2 { + /* Needed for DSS */ + regulator-name = "vdds_dsi"; +}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index c4f20bfe4cce..6fc85f963530 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -9,7 +9,7 @@ /dts-v1/; -#include "omap34xx.dtsi" +#include "omap34xx-hs.dtsi" / { model = "Nokia N900"; @@ -125,6 +125,21 @@ >; }; + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ + 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ + 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ + >; + }; + display_pins: pinmux_display_pins { pinctrl-single,pins = < 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ @@ -358,8 +373,14 @@ cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ }; +/* most boards use vaux3, only some old versions use vmmc2 instead */ &mmc2 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vaux3>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; + non-removable; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 94eb77d3b9dd..5c26c184f2c1 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -#include "omap36xx.dtsi" +#include "omap36xx-hs.dtsi" / { cpus { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f3a0c26ed0c2..daabf99d402a 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -82,6 +82,13 @@ ranges; ti,hwmods = "l3_main"; + aes: aes@480c5000 { + compatible = "ti,omap3-aes"; + ti,hwmods = "aes"; + reg = <0x480c5000 0x50>; + interrupts = <0>; + }; + counter32k: counter@48320000 { compatible = "ti,omap-counter32k"; reg = <0x48320000 0x20>; @@ -260,6 +267,13 @@ ti,hwmods = "i2c3"; }; + mailbox: mailbox@48094000 { + compatible = "ti,omap3-mailbox"; + ti,hwmods = "mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + }; + mcspi1: spi@48098000 { compatible = "ti,omap2-mcspi"; reg = <0x48098000 0x100>; @@ -357,6 +371,13 @@ dma-names = "tx", "rx"; }; + mmu_isp: mmu@480bd400 { + compatible = "ti,omap3-mmu-isp"; + ti,hwmods = "mmu_isp"; + reg = <0x480bd400 0x80>; + interrupts = <8>; + }; + wdt2: wdt@48314000 { compatible = "ti,omap3-wdt"; reg = <0x48314000 0x80>; @@ -442,6 +463,27 @@ dma-names = "tx", "rx"; }; + sham: sham@480c3000 { + compatible = "ti,omap3-sham"; + ti,hwmods = "sham"; + reg = <0x480c3000 0x64>; + interrupts = <49>; + }; + + smartreflex_core: smartreflex@480cb000 { + compatible = "ti,omap3-smartreflex-core"; + ti,hwmods = "smartreflex_core"; + reg = <0x480cb000 0x400>; + interrupts = <19>; + }; + + smartreflex_mpu_iva: smartreflex@480c9000 { + compatible = "ti,omap3-smartreflex-iva"; + ti,hwmods = "smartreflex_mpu_iva"; + reg = <0x480c9000 0x400>; + interrupts = <18>; + }; + timer1: timer@48318000 { compatible = "ti,omap3430-timer"; reg = <0x48318000 0x400>; diff --git a/arch/arm/boot/dts/omap34xx-hs.dtsi b/arch/arm/boot/dts/omap34xx-hs.dtsi new file mode 100644 index 000000000000..1ff626489546 --- /dev/null +++ b/arch/arm/boot/dts/omap34xx-hs.dtsi @@ -0,0 +1,16 @@ +/* Disabled modules for secure omaps */ + +#include "omap34xx.dtsi" + +/* Secure omaps have some devices inaccessible depending on the firmware */ +&aes { + status = "disabled"; +}; + +&sham { + status = "disabled"; +}; + +&timer12 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap36xx-hs.dtsi b/arch/arm/boot/dts/omap36xx-hs.dtsi new file mode 100644 index 000000000000..2c7febb0e016 --- /dev/null +++ b/arch/arm/boot/dts/omap36xx-hs.dtsi @@ -0,0 +1,16 @@ +/* Disabled modules for secure omaps */ + +#include "omap36xx.dtsi" + +/* Secure omaps have some devices inaccessible depending on the firmware */ +&aes { + status = "disabled"; +}; + +&sham { + status = "disabled"; +}; + +&timer12 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 298e85020e1b..88c6a05cab41 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -246,15 +246,6 @@ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; -}; - -&omap4_pmx_wkup { - led_wkgpio_pins: pinmux_leds_wkpins { - pinctrl-single,pins = < - 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ - 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ - >; - }; /* * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP @@ -274,7 +265,7 @@ pinctrl-single,pins = < 0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */ 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ - 0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ @@ -284,6 +275,15 @@ }; }; +&omap4_pmx_wkup { + led_wkgpio_pins: pinmux_leds_wkpins { + pinctrl-single,pins = < + 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ + 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + >; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 5fc3f43c5a81..dbc81fb6ef03 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -300,12 +300,12 @@ wl12xx_pins: pinmux_wl12xx_pins { pinctrl-single,pins = < 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ - 0x108 (PIN_OUTPUT | MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */ - 0x10a (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */ - 0x10c (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */ - 0x10e (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */ - 0x112 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */ + 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ + 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ + 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ + 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ >; }; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 6d09b8d42fdd..f936476c2753 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -245,14 +245,14 @@ mpu_periph_clk: mpu_periph_clk { #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; + compatible = "altr,socfpga-perip-clk"; clocks = <&mpuclk>; fixed-divider = <4>; }; mpu_l2_ram_clk: mpu_l2_ram_clk { #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; + compatible = "altr,socfpga-perip-clk"; clocks = <&mpuclk>; fixed-divider = <2>; }; @@ -266,8 +266,9 @@ l3_main_clk: l3_main_clk { #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; + compatible = "altr,socfpga-perip-clk"; clocks = <&mainclk>; + fixed-divider = <1>; }; l3_mp_clk: l3_mp_clk { diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig index b38cd107f82d..8110d8a653f7 100644 --- a/arch/arm/configs/bockw_defconfig +++ b/arch/arm/configs/bockw_defconfig @@ -27,12 +27,12 @@ CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y -CONFIG_CMDLINE="console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp" -CONFIG_CMDLINE_FORCE=y +CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_SUSPEND is not set CONFIG_PM_RUNTIME=y CONFIG_NET=y +CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y @@ -44,8 +44,6 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set @@ -82,6 +80,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HWMON is not set CONFIG_I2C=y CONFIG_I2C_RCAR=y +CONFIG_REGULATOR=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y @@ -108,11 +107,12 @@ CONFIG_MMC_SDHI=y CONFIG_MMC_SH_MMCIF=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_RX8581=y +CONFIG_DMADEVICES=y +CONFIG_RCAR_HPB_DMAE=y CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_IOMMU_SUPPORT is not set # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_NFS_FS=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index ad7dfbbafa45..aec8a3ea1436 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -13,7 +13,7 @@ CONFIG_S3C24XX_PWM=y CONFIG_ARCH_EXYNOS5=y CONFIG_MACH_EXYNOS4_DT=y CONFIG_SMP=y -CONFIG_NR_CPUS=2 +CONFIG_NR_CPUS=8 CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_HIGHMEM=y diff --git a/arch/arm/configs/genmai_defconfig b/arch/arm/configs/genmai_defconfig new file mode 100644 index 000000000000..69b1531a4c80 --- /dev/null +++ b/arch/arm/configs/genmai_defconfig @@ -0,0 +1,116 @@ +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y +CONFIG_SLAB=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_R7S72100=y +CONFIG_MACH_GENMAI=y +# CONFIG_SH_TIMER_CMT is not set +# CONFIG_SH_TIMER_MTU2 is not set +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_EM_TIMER_STI is not set +CONFIG_ARM_ERRATA_430973=y +CONFIG_ARM_ERRATA_458693=y +CONFIG_ARM_ERRATA_460075=y +CONFIG_ARM_ERRATA_743622=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_KEXEC=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_PM_RUNTIME=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_NETDEVICES=y +# CONFIG_NET_CORE is not set +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_SH_ETH=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=10 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C_SH_MOBILE=y +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_RCAR_THERMAL=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_DRM=y +CONFIG_DRM_RCAR_DU=y +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +CONFIG_MMC_SDHI=y +CONFIG_MMC_SH_MMCIF=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_SH_DMAE=y +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_ARM_UNWIND is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 0ae0eaebf6b2..2e762d94e94b 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -27,6 +27,7 @@ CONFIG_PCI_MVEBU=y CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set +CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CPU_FREQ=y diff --git a/arch/arm/configs/kzm9d_defconfig b/arch/arm/configs/kzm9d_defconfig index 6c37f4a98eb8..e6aed23ac083 100644 --- a/arch/arm/configs/kzm9d_defconfig +++ b/arch/arm/configs/kzm9d_defconfig @@ -32,6 +32,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y +CONFIG_AUTO_ZRELADDR=y CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_PM_RUNTIME=y diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 5cc6360340b1..dd4aced59d3c 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -30,12 +30,12 @@ CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y -CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on" -CONFIG_CMDLINE_FORCE=y +CONFIG_VFP=y CONFIG_KEXEC=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_PM_RUNTIME=y CONFIG_NET=y +CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y @@ -43,8 +43,6 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set @@ -61,7 +59,6 @@ CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set # CONFIG_NET_VENDOR_SEEQ is not set -CONFIG_SMC911X=y CONFIG_SMSC911X=y # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set @@ -106,11 +103,12 @@ CONFIG_USB_STORAGE=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_DMADEVICES=y +CONFIG_RCAR_HPB_DMAE=y CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_IOMMU_SUPPORT is not set # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_NFS_FS=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 4a5903e04827..cdb85cb6b3b0 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -68,7 +68,9 @@ CONFIG_NET_CALXEDA_XGMAC=y CONFIG_KS8851=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y +CONFIG_ICPLUS_PHY=y CONFIG_MDIO_SUN4I=y +CONFIG_TI_CPSW=y CONFIG_KEYBOARD_SPEAR=y CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y @@ -90,6 +92,8 @@ CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_SERIAL_FSL_LPUART=y CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +CONFIG_SERIAL_ST_ASC=y +CONFIG_SERIAL_ST_ASC_CONSOLE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_SIRF=y CONFIG_I2C_TEGRA=y @@ -133,12 +137,14 @@ CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y CONFIG_USB_MXS_PHY=y CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_SPEAR=y +CONFIG_MMC_SDHCI_BCM_KONA=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_EDAC=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 594d706b641f..0f4511d2849f 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -55,6 +55,8 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_PXA3xx=y CONFIG_SERIAL_8250_DW=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y @@ -69,6 +71,7 @@ CONFIG_USB_XHCI_HCD=y CONFIG_MMC=y CONFIG_MMC_MVSDIO=y CONFIG_NEW_LEDS=y +CONFIG_LEDS_GPIO=y CONFIG_LEDS_CLASS=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 98a50c309b90..bfa80a11e8c7 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -173,6 +173,7 @@ CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index d57a85badb5e..3e2259b60236 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -12,6 +12,9 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -58,4 +61,8 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_NLS=y +CONFIG_PRINTK_TIME=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index ac632cc38f24..c6ebc184bf68 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -22,6 +22,7 @@ CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y +CONFIG_ARM_U8500_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_PM_RUNTIME=y @@ -109,6 +110,8 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_MISC_FILESYSTEMS is not set diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index be956dbf6bae..1571d126e9dd 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -61,7 +61,7 @@ extern void __pgd_error(const char *file, int line, pgd_t); * mapping to be mapped at. This is particularly important for * non-high vector CPUs. */ -#define FIRST_USER_ADDRESS PAGE_SIZE +#define FIRST_USER_ADDRESS (PAGE_SIZE * 2) /* * Use TASK_SIZE as the ceiling argument for free_pgtables() and diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 57221e349a7c..f0d180d8b29f 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -14,11 +14,12 @@ #include <asm/pgalloc.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> +#include <asm/fncpy.h> #include <asm/mach-types.h> #include <asm/smp_plat.h> #include <asm/system_misc.h> -extern const unsigned char relocate_new_kernel[]; +extern void relocate_new_kernel(void); extern const unsigned int relocate_new_kernel_size; extern unsigned long kexec_start_address; @@ -142,6 +143,8 @@ void machine_kexec(struct kimage *image) { unsigned long page_list; unsigned long reboot_code_buffer_phys; + unsigned long reboot_entry = (unsigned long)relocate_new_kernel; + unsigned long reboot_entry_phys; void *reboot_code_buffer; /* @@ -168,16 +171,16 @@ void machine_kexec(struct kimage *image) /* copy our kernel relocation code to the control code page */ - memcpy(reboot_code_buffer, - relocate_new_kernel, relocate_new_kernel_size); + reboot_entry = fncpy(reboot_code_buffer, + reboot_entry, + relocate_new_kernel_size); + reboot_entry_phys = (unsigned long)reboot_entry + + (reboot_code_buffer_phys - (unsigned long)reboot_code_buffer); - - flush_icache_range((unsigned long) reboot_code_buffer, - (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); printk(KERN_INFO "Bye!\n"); if (kexec_reinit) kexec_reinit(); - soft_restart(reboot_code_buffer_phys); + soft_restart(reboot_entry_phys); } diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index d0cdedf4864d..95858966d84e 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -2,10 +2,12 @@ * relocate_kernel.S - put the kernel image in place to boot */ +#include <linux/linkage.h> #include <asm/kexec.h> - .globl relocate_new_kernel -relocate_new_kernel: + .align 3 /* not needed for this code, but keeps fncpy() happy */ + +ENTRY(relocate_new_kernel) ldr r0,kexec_indirection_page ldr r1,kexec_start_address @@ -79,6 +81,8 @@ kexec_mach_type: kexec_boot_atags: .long 0x0 +ENDPROC(relocate_new_kernel) + relocate_new_kernel_end: .globl relocate_new_kernel_size diff --git a/arch/arm/kernel/sigreturn_codes.S b/arch/arm/kernel/sigreturn_codes.S index 3c5d0f2170fd..b84d0cb13682 100644 --- a/arch/arm/kernel/sigreturn_codes.S +++ b/arch/arm/kernel/sigreturn_codes.S @@ -30,6 +30,27 @@ * snippets. */ +/* + * In CPU_THUMBONLY case kernel arm opcodes are not allowed. + * Note in this case codes skips those instructions but it uses .org + * directive to keep correct layout of sigreturn_codes array. + */ +#ifndef CONFIG_CPU_THUMBONLY +#define ARM_OK(code...) code +#else +#define ARM_OK(code...) +#endif + + .macro arm_slot n + .org sigreturn_codes + 12 * (\n) +ARM_OK( .arm ) + .endm + + .macro thumb_slot n + .org sigreturn_codes + 12 * (\n) + 8 + .thumb + .endm + #if __LINUX_ARM_ARCH__ <= 4 /* * Note we manually set minimally required arch that supports @@ -45,26 +66,27 @@ .global sigreturn_codes .type sigreturn_codes, #object - .arm + .align sigreturn_codes: /* ARM sigreturn syscall code snippet */ - mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) - swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE) + arm_slot 0 +ARM_OK( mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) ) +ARM_OK( swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE) ) /* Thumb sigreturn syscall code snippet */ - .thumb + thumb_slot 0 movs r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) swi #0 /* ARM sigreturn_rt syscall code snippet */ - .arm - mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) - swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) + arm_slot 1 +ARM_OK( mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) ) +ARM_OK( swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) ) /* Thumb sigreturn_rt syscall code snippet */ - .thumb + thumb_slot 1 movs r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) swi #0 @@ -74,7 +96,7 @@ sigreturn_codes: * it is thumb case or not, so we need additional * word after real last entry. */ - .arm + arm_slot 2 .space 4 .size sigreturn_codes, . - sigreturn_codes diff --git a/arch/arm/lib/delay-loop.S b/arch/arm/lib/delay-loop.S index 36b668d8e121..bc1033b897b4 100644 --- a/arch/arm/lib/delay-loop.S +++ b/arch/arm/lib/delay-loop.S @@ -40,6 +40,7 @@ ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06 /* * loops = r0 * HZ * loops_per_jiffy / 1000000 */ + .align 3 @ Delay routine ENTRY(__loop_delay) diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index f607deb40f4d..bc7b363a3083 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -265,11 +264,9 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ - clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); - clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); - clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&clkevt); + clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, + 2, AT91_ST_ALMV); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 3ed190ce062b..c5101dcb4fb0 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -16,7 +16,11 @@ #include <mach/at91_ramc.h> #include <mach/at91rm9200_sdramc.h> +#ifdef CONFIG_PM extern void at91_pm_set_standby(void (*at91_standby)(void)); +#else +static inline void at91_pm_set_standby(void (*at91_standby)(void)) { } +#endif /* * The AT91RM9200 goes into self-refresh mode with this command, and will diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c index 3ea86428ee09..a28873fe3049 100644 --- a/arch/arm/mach-at91/sama5d3.c +++ b/arch/arm/mach-at91/sama5d3.c @@ -95,19 +95,19 @@ static struct clk twi0_clk = { .name = "twi0_clk", .pid = SAMA5D3_ID_TWI0, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk twi1_clk = { .name = "twi1_clk", .pid = SAMA5D3_ID_TWI1, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk twi2_clk = { .name = "twi2_clk", .pid = SAMA5D3_ID_TWI2, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk mmc0_clk = { .name = "mci0_clk", diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 2739ca2c1334..e0091685fd48 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/spinlock.h> +#include <video/vga.h> #include <asm/pgtable.h> #include <asm/page.h> @@ -196,6 +197,8 @@ void __init footbridge_map_io(void) iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO)); } + + vga_base = PCIMEM_BASE; } void footbridge_restart(enum reboot_mode mode, const char *cmd) diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 3490a24f969e..7c2fdae9a38b 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -18,7 +18,6 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/spinlock.h> -#include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> @@ -291,7 +290,6 @@ void __init dc21285_preinit(void) int cfn_mode; pcibios_min_mem = 0x81000000; - vga_base = PCIMEM_BASE; mem_size = (unsigned int)high_memory - PAGE_OFFSET; for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1) diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c index b08243500e2e..1a7235fb52ac 100644 --- a/arch/arm/mach-footbridge/ebsa285.c +++ b/arch/arm/mach-footbridge/ebsa285.c @@ -30,21 +30,24 @@ static const struct { const char *name; const char *trigger; } ebsa285_leds[] = { - { "ebsa285:amber", "heartbeat", }, - { "ebsa285:green", "cpu0", }, + { "ebsa285:amber", "cpu0", }, + { "ebsa285:green", "heartbeat", }, { "ebsa285:red",}, }; +static unsigned char hw_led_state; + static void ebsa285_led_set(struct led_classdev *cdev, enum led_brightness b) { struct ebsa285_led *led = container_of(cdev, struct ebsa285_led, cdev); - if (b != LED_OFF) - *XBUS_LEDS |= led->mask; + if (b == LED_OFF) + hw_led_state |= led->mask; else - *XBUS_LEDS &= ~led->mask; + hw_led_state &= ~led->mask; + *XBUS_LEDS = hw_led_state; } static enum led_brightness ebsa285_led_get(struct led_classdev *cdev) @@ -52,18 +55,19 @@ static enum led_brightness ebsa285_led_get(struct led_classdev *cdev) struct ebsa285_led *led = container_of(cdev, struct ebsa285_led, cdev); - return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF; + return hw_led_state & led->mask ? LED_OFF : LED_FULL; } static int __init ebsa285_leds_init(void) { int i; - if (machine_is_ebsa285()) + if (!machine_is_ebsa285()) return -ENODEV; - /* 3 LEDS All ON */ - *XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED; + /* 3 LEDS all off */ + hw_led_state = XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED; + *XBUS_LEDS = hw_led_state; for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) { struct ebsa285_led *led; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dc21df166161..4191ae08f4c8 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -192,19 +192,6 @@ config MACH_OMAP2_TUSB6010 depends on ARCH_OMAP2 && SOC_OMAP2420 default y if MACH_NOKIA_N8X0 -config MACH_OMAP_H4 - bool "OMAP 2420 H4 board" - depends on SOC_OMAP2420 - default y - select OMAP_DEBUG_DEVICES - select OMAP_PACKAGE_ZAF - -config MACH_OMAP_2430SDP - bool "OMAP 2430 SDP board" - depends on SOC_OMAP2430 - default y - select OMAP_PACKAGE_ZAC - config MACH_OMAP3_BEAGLE bool "OMAP3 BEAGLE board" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 1f25f3e99c05..f78b177e8f4f 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -19,11 +19,11 @@ secure-common = omap-smc.o omap-secure.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) -obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common) -obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common) -obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common) ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) obj-y += mcbsp.o @@ -66,8 +66,6 @@ obj-$(CONFIG_SOC_OMAP5) += omap4-restart.o obj-$(CONFIG_SOC_DRA7XX) += omap4-restart.o # Pin multiplexing -obj-$(CONFIG_SOC_OMAP2420) += mux2420.o -obj-$(CONFIG_SOC_OMAP2430) += mux2430.o obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o # SMS/SDRC @@ -237,8 +235,6 @@ obj-$(CONFIG_SOC_OMAP2420) += msdi.o # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o -obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o -obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c deleted file mode 100644 index c711ad6ac067..000000000000 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ /dev/null @@ -1,273 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-2430sdp.c - * - * Copyright (C) 2006 Texas Instruments - * - * Modified from mach-omap2/board-generic.c - * - * Initial Code : Based on a patch from Komal Shah and Richard Woodruff - * Updated the Code for 2430 SDP : Syed Mohammed Khasim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/mmc/host.h> -#include <linux/delay.h> -#include <linux/i2c/twl.h> -#include <linux/regulator/machine.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/usb/phy.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "gpmc.h" -#include "gpmc-smc91x.h" - -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include "mux.h" -#include "hsmmc.h" -#include "common-board-devices.h" - -#define SDP2430_CS0_BASE 0x04000000 -#define SECONDARY_LCD_GPIO 147 - -static struct mtd_partition sdp2430_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_256K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data sdp2430_flash_data = { - .width = 2, - .parts = sdp2430_partitions, - .nr_parts = ARRAY_SIZE(sdp2430_partitions), -}; - -static struct resource sdp2430_flash_resource = { - .start = SDP2430_CS0_BASE, - .end = SDP2430_CS0_BASE + SZ_64M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device sdp2430_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &sdp2430_flash_data, - }, - .num_resources = 1, - .resource = &sdp2430_flash_resource, -}; - -/* LCD */ -#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 -#define SDP2430_LCD_PANEL_ENABLE_GPIO 154 - -static const struct display_timing sdp2430_lcd_videomode = { - .pixelclock = { 0, 5400000, 0 }, - - .hactive = { 0, 240, 0 }, - .hfront_porch = { 0, 3, 0 }, - .hback_porch = { 0, 39, 0 }, - .hsync_len = { 0, 3, 0 }, - - .vactive = { 0, 320, 0 }, - .vfront_porch = { 0, 2, 0 }, - .vback_porch = { 0, 7, 0 }, - .vsync_len = { 0, 1, 0 }, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | - DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, -}; - -static struct panel_dpi_platform_data sdp2430_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 16, - - .display_timing = &sdp2430_lcd_videomode, - - .enable_gpio = SDP2430_LCD_PANEL_ENABLE_GPIO, - .backlight_gpio = SDP2430_LCD_PANEL_BACKLIGHT_GPIO, -}; - -static struct platform_device sdp2430_lcd_device = { - .name = "panel-dpi", - .id = 0, - .dev.platform_data = &sdp2430_lcd_pdata, -}; - -static struct omap_dss_board_info sdp2430_dss_data = { - .default_display_name = "lcd", -}; - -static struct platform_device *sdp2430_devices[] __initdata = { - &sdp2430_flash_device, - &sdp2430_lcd_device, -}; - -#if IS_ENABLED(CONFIG_SMC91X) - -static struct omap_smc91x_platform_data board_smc91x_data = { - .cs = 5, - .gpio_irq = 149, - .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 | - IORESOURCE_IRQ_LOWLEVEL, - -}; - -static void __init board_smc91x_init(void) -{ - omap_mux_init_gpio(149, OMAP_PIN_INPUT); - gpmc_smc91x_init(&board_smc91x_data); -} - -#else - -static inline void board_smc91x_init(void) -{ -} - -#endif - -static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data sdp2430_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(sdp2430_vmmc1_supplies), - .consumer_supplies = &sdp2430_vmmc1_supplies[0], -}; - -static struct twl4030_gpio_platform_data sdp2430_gpio_data = { -}; - -static struct twl4030_platform_data sdp2430_twldata = { - /* platform_data for children goes here */ - .gpio = &sdp2430_gpio_data, - .vmmc1 = &sdp2430_vmmc1, -}; - -static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = { - { - I2C_BOARD_INFO("isp1301_omap", 0x2D), - .flags = I2C_CLIENT_WAKE, - }, -}; - -static int __init omap2430_i2c_init(void) -{ - sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78); - omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, - ARRAY_SIZE(sdp2430_i2c1_boardinfo)); - omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START, - &sdp2430_twldata); - return 0; -} - -static struct omap2_hsmmc_info mmc[] __initdata = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .ext_clock = 1, - }, - {} /* Terminator */ -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init omap_2430sdp_init(void) -{ - omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC); - - omap2430_i2c_init(); - - platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - omap_hsmmc_init(mmc); - - omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - board_smc91x_init(); - - /* Turn off secondary LCD backlight */ - gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW, - "Secondary LCD backlight"); - - omap_display_init(&sdp2430_dss_data); -} - -MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") - /* Maintainer: Syed Khasim - Texas Instruments Inc */ - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap243x_map_io, - .init_early = omap2430_init_early, - .init_irq = omap2_init_irq, - .handle_irq = omap2_intc_handle_irq, - .init_machine = omap_2430sdp_init, - .init_late = omap2430_init_late, - .init_time = omap2_sync32k_timer_init, - .restart = omap2xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 19f1652e94cf..8d972ff18c56 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -131,6 +131,24 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") .dt_compat = omap3_gp_boards_compat, .restart = omap3xxx_restart, MACHINE_END + +static const char *am3517_boards_compat[] __initdata = { + "ti,am3517", + NULL, +}; + +DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = am35xx_init_early, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .init_late = omap3_init_late, + .init_time = omap3_gptimer_timer_init, + .dt_compat = am3517_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END #endif #ifdef CONFIG_SOC_AM33XX diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c deleted file mode 100644 index f7808349a734..000000000000 --- a/arch/arm/mach-omap2/board-h4.c +++ /dev/null @@ -1,365 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-h4.c - * - * Copyright (C) 2005 Nokia Corporation - * Author: Paul Mundt <paul.mundt@nokia.com> - * - * Modified from mach-omap/omap1/board-generic.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/delay.h> -#include <linux/workqueue.h> -#include <linux/i2c.h> -#include <linux/platform_data/at24.h> -#include <linux/input.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/input/matrix_keypad.h> -#include <linux/mfd/menelaus.h> -#include <linux/omap-dma.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include "common.h" -#include "mux.h" -#include "control.h" -#include "gpmc.h" -#include "gpmc-smc91x.h" - -#define H4_FLASH_CS 0 - -#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE) -static const uint32_t board_matrix_keys[] = { - KEY(0, 0, KEY_LEFT), - KEY(1, 0, KEY_RIGHT), - KEY(2, 0, KEY_A), - KEY(3, 0, KEY_B), - KEY(4, 0, KEY_C), - KEY(0, 1, KEY_DOWN), - KEY(1, 1, KEY_UP), - KEY(2, 1, KEY_E), - KEY(3, 1, KEY_F), - KEY(4, 1, KEY_G), - KEY(0, 2, KEY_ENTER), - KEY(1, 2, KEY_I), - KEY(2, 2, KEY_J), - KEY(3, 2, KEY_K), - KEY(4, 2, KEY_3), - KEY(0, 3, KEY_M), - KEY(1, 3, KEY_N), - KEY(2, 3, KEY_O), - KEY(3, 3, KEY_P), - KEY(4, 3, KEY_Q), - KEY(0, 4, KEY_R), - KEY(1, 4, KEY_4), - KEY(2, 4, KEY_T), - KEY(3, 4, KEY_U), - KEY(4, 4, KEY_ENTER), - KEY(0, 5, KEY_V), - KEY(1, 5, KEY_W), - KEY(2, 5, KEY_L), - KEY(3, 5, KEY_S), - KEY(4, 5, KEY_ENTER), -}; - -static const struct matrix_keymap_data board_keymap_data = { - .keymap = board_matrix_keys, - .keymap_size = ARRAY_SIZE(board_matrix_keys), -}; - -static unsigned int board_keypad_row_gpios[] = { - 88, 89, 124, 11, 6, 96 -}; - -static unsigned int board_keypad_col_gpios[] = { - 90, 91, 100, 36, 12, 97, 98 -}; - -static struct matrix_keypad_platform_data board_keypad_platform_data = { - .keymap_data = &board_keymap_data, - .row_gpios = board_keypad_row_gpios, - .num_row_gpios = ARRAY_SIZE(board_keypad_row_gpios), - .col_gpios = board_keypad_col_gpios, - .num_col_gpios = ARRAY_SIZE(board_keypad_col_gpios), - .active_low = 1, - - .debounce_ms = 20, - .col_scan_delay_us = 5, -}; - -static struct platform_device board_keyboard = { - .name = "matrix-keypad", - .id = -1, - .dev = { - .platform_data = &board_keypad_platform_data, - }, -}; -static void __init board_mkp_init(void) -{ - omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP); - omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP); - omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP); - omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP); - if (omap_has_menelaus()) { - omap_mux_init_signal("sdrc_a14.gpio0", - OMAP_PULL_ENA | OMAP_PULL_UP); - omap_mux_init_signal("vlynq_rx0.gpio_15", 0); - omap_mux_init_signal("gpio_98", 0); - board_keypad_row_gpios[5] = 0; - board_keypad_col_gpios[2] = 15; - board_keypad_col_gpios[6] = 18; - } else { - omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP); - omap_mux_init_signal("gpio_100", 0); - omap_mux_init_signal("gpio_98", 0); - } - omap_mux_init_signal("gpio_90", 0); - omap_mux_init_signal("gpio_91", 0); - omap_mux_init_signal("gpio_36", 0); - omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); - omap_mux_init_signal("gpio_97", 0); - - platform_device_register(&board_keyboard); -} -#else -static inline void board_mkp_init(void) -{ -} -#endif - -static struct mtd_partition h4_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data h4_flash_data = { - .width = 2, - .parts = h4_partitions, - .nr_parts = ARRAY_SIZE(h4_partitions), -}; - -static struct resource h4_flash_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device h4_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &h4_flash_data, - }, - .num_resources = 1, - .resource = &h4_flash_resource, -}; - -static const struct display_timing cm_t35_lcd_videomode = { - .pixelclock = { 0, 6250000, 0 }, - - .hactive = { 0, 240, 0 }, - .hfront_porch = { 0, 15, 0 }, - .hback_porch = { 0, 60, 0 }, - .hsync_len = { 0, 15, 0 }, - - .vactive = { 0, 320, 0 }, - .vfront_porch = { 0, 1, 0 }, - .vback_porch = { 0, 1, 0 }, - .vsync_len = { 0, 1, 0 }, - - .flags = DISPLAY_FLAGS_HSYNC_HIGH | DISPLAY_FLAGS_VSYNC_HIGH | - DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, -}; - -static struct panel_dpi_platform_data cm_t35_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 16, - - .display_timing = &cm_t35_lcd_videomode, - - .enable_gpio = -1, - .backlight_gpio = -1, -}; - -static struct platform_device cm_t35_lcd_device = { - .name = "panel-dpi", - .id = 0, - .dev.platform_data = &cm_t35_lcd_pdata, -}; - -static struct platform_device *h4_devices[] __initdata = { - &h4_flash_device, - &cm_t35_lcd_device, -}; - -static struct omap_dss_board_info h4_dss_data = { - .default_display_name = "lcd", -}; - -/* 2420 Sysboot setup (2430 is different) */ -static u32 get_sysboot_value(void) -{ - return (omap_ctrl_readl(OMAP24XX_CONTROL_STATUS) & - (OMAP2_SYSBOOT_5_MASK | OMAP2_SYSBOOT_4_MASK | - OMAP2_SYSBOOT_3_MASK | OMAP2_SYSBOOT_2_MASK | - OMAP2_SYSBOOT_1_MASK | OMAP2_SYSBOOT_0_MASK)); -} - -/* H4-2420's always used muxed mode, H4-2422's always use non-muxed - * - * Note: OMAP-GIT doesn't correctly do is_cpu_omap2422 and is_cpu_omap2423 - * correctly. The macro needs to look at production_id not just hawkeye. - */ -static u32 is_gpmc_muxed(void) -{ - u32 mux; - mux = get_sysboot_value(); - if ((mux & 0xF) == 0xd) - return 1; /* NAND config (could be either) */ - if (mux & 0x2) /* if mux'ed */ - return 1; - else - return 0; -} - -#if IS_ENABLED(CONFIG_SMC91X) - -static struct omap_smc91x_platform_data board_smc91x_data = { - .cs = 1, - .gpio_irq = 92, - .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_LOWLEVEL, -}; - -static void __init board_smc91x_init(void) -{ - if (is_gpmc_muxed()) - board_smc91x_data.flags |= GPMC_MUX_ADD_DATA; - - omap_mux_init_gpio(board_smc91x_data.gpio_irq, OMAP_PIN_INPUT); - gpmc_smc91x_init(&board_smc91x_data); -} - -#else - -static inline void board_smc91x_init(void) -{ -} - -#endif - -static void __init h4_init_flash(void) -{ - unsigned long base; - - if (gpmc_cs_request(H4_FLASH_CS, SZ_64M, &base) < 0) { - printk("Can't request GPMC CS for flash\n"); - return; - } - h4_flash_resource.start = base; - h4_flash_resource.end = base + SZ_64M - 1; -} - -static struct at24_platform_data m24c01 = { - .byte_len = SZ_1K / 8, - .page_size = 16, -}; - -static struct i2c_board_info __initdata h4_i2c_board_info[] = { - { - I2C_BOARD_INFO("isp1301_omap", 0x2d), - }, - { /* EEPROM on mainboard */ - I2C_BOARD_INFO("24c01", 0x52), - .platform_data = &m24c01, - }, - { /* EEPROM on cpu card */ - I2C_BOARD_INFO("24c01", 0x57), - .platform_data = &m24c01, - }, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init omap_h4_init(void) -{ - omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF); - - /* - * Make sure the serial ports are muxed on at this point. - * You have to mux them off in device drivers later on - * if not needed. - */ - - board_mkp_init(); - h4_i2c_board_info[0].irq = gpio_to_irq(125); - i2c_register_board_info(1, h4_i2c_board_info, - ARRAY_SIZE(h4_i2c_board_info)); - - platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - h4_init_flash(); - board_smc91x_init(); - - omap_display_init(&h4_dss_data); -} - -MACHINE_START(OMAP_H4, "OMAP2420 H4 board") - /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap242x_map_io, - .init_early = omap2420_init_early, - .init_irq = omap2_init_irq, - .handle_irq = omap2_intc_handle_irq, - .init_machine = omap_h4_init, - .init_late = omap2420_init_late, - .init_time = omap2_sync32k_timer_init, - .restart = omap2xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 827d15009a86..aead77a4bc6d 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -21,7 +21,6 @@ #include <linux/i2c.h> #include <linux/spi/spi.h> #include <linux/usb/musb.h> -#include <linux/platform_data/i2c-cbus-gpio.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/mtd-onenand-omap2.h> #include <linux/mfd/menelaus.h> @@ -32,8 +31,7 @@ #include "common.h" #include "mmc.h" - -#include "mux.h" +#include "soc.h" #include "gpmc-onenand.h" #define TUSB6010_ASYNC_CS 1 @@ -42,44 +40,30 @@ #define TUSB6010_GPIO_ENABLE 0 #define TUSB6010_DMACHAN 0x3f -#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE) -static struct i2c_cbus_platform_data n8x0_cbus_data = { - .clk_gpio = 66, - .dat_gpio = 65, - .sel_gpio = 64, -}; +#define NOKIA_N810_WIMAX (1 << 2) +#define NOKIA_N810 (1 << 1) +#define NOKIA_N800 (1 << 0) -static struct platform_device n8x0_cbus_device = { - .name = "i2c-cbus-gpio", - .id = 3, - .dev = { - .platform_data = &n8x0_cbus_data, - }, -}; +static u32 board_caps; -static struct i2c_board_info n8x0_i2c_board_info_3[] __initdata = { - { - I2C_BOARD_INFO("retu-mfd", 0x01), - }, -}; +#define board_is_n800() (board_caps & NOKIA_N800) +#define board_is_n810() (board_caps & NOKIA_N810) +#define board_is_n810_wimax() (board_caps & NOKIA_N810_WIMAX) -static void __init n8x0_cbus_init(void) +static void board_check_revision(void) { - const int retu_irq_gpio = 108; + if (of_have_populated_dt()) { + if (of_machine_is_compatible("nokia,n800")) + board_caps = NOKIA_N800; + else if (of_machine_is_compatible("nokia,n810")) + board_caps = NOKIA_N810; + else if (of_machine_is_compatible("nokia,n810-wimax")) + board_caps = NOKIA_N810_WIMAX; + } - if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ")) - return; - irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING); - n8x0_i2c_board_info_3[0].irq = gpio_to_irq(retu_irq_gpio); - i2c_register_board_info(3, n8x0_i2c_board_info_3, - ARRAY_SIZE(n8x0_i2c_board_info_3)); - platform_device_register(&n8x0_cbus_device); -} -#else /* CONFIG_I2C_CBUS_GPIO */ -static void __init n8x0_cbus_init(void) -{ + if (!board_caps) + pr_err("Unknown board\n"); } -#endif /* CONFIG_I2C_CBUS_GPIO */ #if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE) /* @@ -178,49 +162,6 @@ static struct spi_board_info n800_spi_board_info[] __initdata = { }, }; -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) - -static struct mtd_partition onenand_partitions[] = { - { - .name = "bootloader", - .offset = 0, - .size = 0x20000, - .mask_flags = MTD_WRITEABLE, /* Force read-only */ - }, - { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = 0x60000, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 0x200000, - }, - { - .name = "initfs", - .offset = MTDPART_OFS_APPEND, - .size = 0x400000, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_onenand_platform_data board_onenand_data[] = { - { - .cs = 0, - .gpio_irq = 26, - .parts = onenand_partitions, - .nr_parts = ARRAY_SIZE(onenand_partitions), - .flags = ONENAND_SYNC_READ, - } -}; -#endif - #if defined(CONFIG_MENELAUS) && \ (defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)) @@ -342,7 +283,7 @@ static void n810_set_power_emmc(struct device *dev, static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (machine_is_nokia_n800() || slot == 0) + if (board_is_n800() || slot == 0) return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd); n810_set_power_emmc(dev, power_on); @@ -388,7 +329,7 @@ static void n8x0_mmc_callback(void *data, u8 card_mask) { int bit, *openp, index; - if (machine_is_nokia_n800()) { + if (board_is_n800()) { bit = 1 << 1; openp = &slot2_cover_open; index = 1; @@ -421,7 +362,7 @@ static int n8x0_mmc_late_init(struct device *dev) if (r < 0) return r; - if (machine_is_nokia_n800()) + if (board_is_n800()) vs2sel = 0; else vs2sel = 2; @@ -444,7 +385,7 @@ static int n8x0_mmc_late_init(struct device *dev) if (r < 0) return r; - if (machine_is_nokia_n800()) { + if (board_is_n800()) { bit = 1 << 1; openp = &slot2_cover_open; } else { @@ -471,7 +412,7 @@ static void n8x0_mmc_shutdown(struct device *dev) { int vs2sel; - if (machine_is_nokia_n800()) + if (board_is_n800()) vs2sel = 0; else vs2sel = 2; @@ -486,7 +427,7 @@ static void n8x0_mmc_cleanup(struct device *dev) gpio_free(N8X0_SLOT_SWITCH_GPIO); - if (machine_is_nokia_n810()) { + if (board_is_n810()) { gpio_free(N810_EMMC_VSD_GPIO); gpio_free(N810_EMMC_VIO_GPIO); } @@ -497,7 +438,7 @@ static void n8x0_mmc_cleanup(struct device *dev) * MMC controller2 is not in use. */ static struct omap_mmc_platform_data mmc1_data = { - .nr_slots = 2, + .nr_slots = 0, .switch_slot = n8x0_mmc_switch_slot, .init = n8x0_mmc_late_init, .cleanup = n8x0_mmc_cleanup, @@ -537,7 +478,7 @@ static void __init n8x0_mmc_init(void) { int err; - if (machine_is_nokia_n810()) { + if (board_is_n810()) { mmc1_data.slots[0].name = "external"; /* @@ -555,7 +496,7 @@ static void __init n8x0_mmc_init(void) if (err) return; - if (machine_is_nokia_n810()) { + if (board_is_n810()) { err = gpio_request_array(n810_emmc_gpios, ARRAY_SIZE(n810_emmc_gpios)); if (err) { @@ -564,11 +505,11 @@ static void __init n8x0_mmc_init(void) } } + mmc1_data.nr_slots = 2; mmc_data[0] = &mmc1_data; - omap242x_init_mmc(mmc_data); } #else - +static struct omap_mmc_platform_data mmc1_data; void __init n8x0_mmc_init(void) { } @@ -650,109 +591,32 @@ static struct i2c_board_info n810_i2c_board_info_2[] __initdata = { }, }; -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* I2S codec port pins for McBSP block */ - OMAP2420_MUX(EAC_AC_SCLK, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP2420_MUX(EAC_AC_FS, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP2420_MUX(EAC_AC_DIN, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP2420_MUX(EAC_AC_DOUT, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -static struct omap_device_pad serial2_pads[] __initdata = { - { - .name = "uart3_rx_irrx.uart3_rx_irrx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_MUX_MODE0, - .idle = OMAP_MUX_MODE3 /* Mux as GPIO for idle */ - }, -}; - -static inline void board_serial_init(void) +static int __init n8x0_late_initcall(void) { - struct omap_board_data bdata; - - bdata.flags = 0; - bdata.pads = NULL; - bdata.pads_cnt = 0; - - bdata.id = 0; - omap_serial_init_port(&bdata, NULL); - - bdata.id = 1; - omap_serial_init_port(&bdata, NULL); - - bdata.id = 2; - bdata.pads = serial2_pads; - bdata.pads_cnt = ARRAY_SIZE(serial2_pads); - omap_serial_init_port(&bdata, NULL); -} + if (!board_caps) + return -ENODEV; -#else + n8x0_mmc_init(); + n8x0_usb_init(); -static inline void board_serial_init(void) -{ - omap_serial_init(); + return 0; } +omap_late_initcall(n8x0_late_initcall); -#endif - -static void __init n8x0_init_machine(void) +/* + * Legacy init pdata init for n8x0. Note that we want to follow the + * I2C bus numbering starting at 0 for device tree like other omaps. + */ +void * __init n8x0_legacy_init(void) { - omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); - /* FIXME: add n810 spi devices */ + board_check_revision(); spi_register_board_info(n800_spi_board_info, ARRAY_SIZE(n800_spi_board_info)); - omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1, - ARRAY_SIZE(n8x0_i2c_board_info_1)); - omap_register_i2c_bus(2, 400, NULL, 0); - if (machine_is_nokia_n810()) - i2c_register_board_info(2, n810_i2c_board_info_2, + i2c_register_board_info(0, n8x0_i2c_board_info_1, + ARRAY_SIZE(n8x0_i2c_board_info_1)); + if (board_is_n810()) + i2c_register_board_info(1, n810_i2c_board_info_2, ARRAY_SIZE(n810_i2c_board_info_2)); - board_serial_init(); - omap_sdrc_init(NULL, NULL); - gpmc_onenand_init(board_onenand_data); - n8x0_mmc_init(); - n8x0_usb_init(); - n8x0_cbus_init(); -} -MACHINE_START(NOKIA_N800, "Nokia N800") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap242x_map_io, - .init_early = omap2420_init_early, - .init_irq = omap2_init_irq, - .handle_irq = omap2_intc_handle_irq, - .init_machine = n8x0_init_machine, - .init_late = omap2420_init_late, - .init_time = omap2_sync32k_timer_init, - .restart = omap2xxx_restart, -MACHINE_END - -MACHINE_START(NOKIA_N810, "Nokia N810") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap242x_map_io, - .init_early = omap2420_init_early, - .init_irq = omap2_init_irq, - .handle_irq = omap2_intc_handle_irq, - .init_machine = n8x0_init_machine, - .init_late = omap2420_init_late, - .init_time = omap2_sync32k_timer_init, - .restart = omap2xxx_restart, -MACHINE_END - -MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap242x_map_io, - .init_early = omap2420_init_early, - .init_irq = omap2_init_irq, - .handle_irq = omap2_intc_handle_irq, - .init_machine = n8x0_init_machine, - .init_late = omap2420_init_late, - .init_time = omap2_sync32k_timer_init, - .restart = omap2xxx_restart, -MACHINE_END + return &mmc1_data; +} diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 72bb41b3fd25..f338177e6900 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -10,5 +10,6 @@ struct ads7846_platform_data; void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct ads7846_platform_data *board_pdata); +void *n8x0_legacy_init(void); #endif /* __OMAP_COMMON_BOARD_DEVICES__ */ diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index f7644febee81..240db38f232c 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -293,13 +293,13 @@ static inline void omap4_cpu_resume(void) #endif void pdata_quirks_init(struct of_device_id *); +void omap_auxdata_legacy_init(struct device *dev); void omap_pcs_legacy_init(int irq, void (*rearm)(void)); struct omap_sdrc_params; extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); struct omap2_hsmmc_info; -extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers); extern void omap_reserve(void); struct omap_hwmod; diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index a4e536b11ec9..58347bb874a0 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -32,7 +32,6 @@ #include "soc.h" #include "iomap.h" -#include "mux.h" #include "control.h" #include "display.h" #include "prm.h" @@ -102,90 +101,13 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = { { "dss_hdmi", "omapdss_hdmi", -1 }, }; -static void __init omap4_tpd12s015_mux_pads(void) -{ - omap_mux_init_signal("hdmi_cec", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_scl", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_sda", - OMAP_PIN_INPUT_PULLUP); -} - -static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) -{ - u32 reg; - u16 control_i2c_1; - - /* - * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and - * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable - * internal pull up resistor. - */ - if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) { - control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1; - reg = omap4_ctrl_pad_readl(control_i2c_1); - reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK | - OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK); - omap4_ctrl_pad_writel(reg, control_i2c_1); - } -} - -static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) -{ - u32 enable_mask, enable_shift; - u32 pipd_mask, pipd_shift; - u32 reg; - - if (dsi_id == 0) { - enable_mask = OMAP4_DSI1_LANEENABLE_MASK; - enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT; - pipd_mask = OMAP4_DSI1_PIPD_MASK; - pipd_shift = OMAP4_DSI1_PIPD_SHIFT; - } else if (dsi_id == 1) { - enable_mask = OMAP4_DSI2_LANEENABLE_MASK; - enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT; - pipd_mask = OMAP4_DSI2_PIPD_MASK; - pipd_shift = OMAP4_DSI2_PIPD_SHIFT; - } else { - return -ENODEV; - } - - reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY); - - reg &= ~enable_mask; - reg &= ~pipd_mask; - - reg |= (lanes << enable_shift) & enable_mask; - reg |= (lanes << pipd_shift) & pipd_mask; - - omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY); - - return 0; -} - -int __init omap_hdmi_init(enum omap_hdmi_flags flags) -{ - if (cpu_is_omap44xx()) { - omap4_hdmi_mux_pads(flags); - omap4_tpd12s015_mux_pads(); - } - - return 0; -} - static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) { - if (cpu_is_omap44xx()) - return omap4_dsi_mux_pads(dsi_id, lane_mask); - return 0; } static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) { - if (cpu_is_omap44xx()) - omap4_dsi_mux_pads(dsi_id, 0); } static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput) diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 365bfd3d9c68..dadccc91488c 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -223,7 +223,7 @@ void __init omap_4430sdp_display_init_of(void) static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = { .name = "dvi", .source = "tfp410.0", - .i2c_bus_num = 3, + .i2c_bus_num = 2, }; static struct platform_device omap3_igep2_dvi_connector_device = { diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 81de56251955..d24926e6340f 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1502,6 +1502,22 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, } /* + * For some GPMC devices we still need to rely on the bootloader + * timings because the devices can be connected via FPGA. So far + * the list is smc91x on the omap2 SDP boards, and 8250 on zooms. + * REVISIT: Add timing support from slls644g.pdf and from the + * lan91c96 manual. + */ + if (of_device_is_compatible(child, "ns16550a") || + of_device_is_compatible(child, "smsc,lan91c94") || + of_device_is_compatible(child, "smsc,lan91c111")) { + dev_warn(&pdev->dev, + "%s using bootloader timings on CS%d\n", + child->name, cs); + goto no_timings; + } + + /* * FIXME: gpmc_cs_request() will map the CS to an arbitary * location in the gpmc address space. When booting with * device-tree we want the NOR flash to be mapped to the @@ -1529,6 +1545,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, gpmc_read_timings_dt(child, &gpmc_t); gpmc_cs_set_timings(cs, &gpmc_t); +no_timings: if (of_platform_device_create(child, NULL, &pdev->dev)) return 0; @@ -1541,42 +1558,6 @@ err: return ret; } -/* - * REVISIT: Add timing support from slls644g.pdf - */ -static int gpmc_probe_8250(struct platform_device *pdev, - struct device_node *child) -{ - struct resource res; - unsigned long base; - int ret, cs; - - if (of_property_read_u32(child, "reg", &cs) < 0) { - dev_err(&pdev->dev, "%s has no 'reg' property\n", - child->full_name); - return -ENODEV; - } - - if (of_address_to_resource(child, 0, &res) < 0) { - dev_err(&pdev->dev, "%s has malformed 'reg' property\n", - child->full_name); - return -ENODEV; - } - - ret = gpmc_cs_request(cs, resource_size(&res), &base); - if (ret < 0) { - dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs); - return ret; - } - - if (of_platform_device_create(child, NULL, &pdev->dev)) - return 0; - - dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name); - - return -ENODEV; -} - static int gpmc_probe_dt(struct platform_device *pdev) { int ret; @@ -1618,10 +1599,9 @@ static int gpmc_probe_dt(struct platform_device *pdev) else if (of_node_cmp(child->name, "onenand") == 0) ret = gpmc_probe_onenand_child(pdev, child); else if (of_node_cmp(child->name, "ethernet") == 0 || - of_node_cmp(child->name, "nor") == 0) + of_node_cmp(child->name, "nor") == 0 || + of_node_cmp(child->name, "uart") == 0) ret = gpmc_probe_generic_child(pdev, child); - else if (of_node_cmp(child->name, "8250") == 0) - ret = gpmc_probe_8250(pdev, child); if (WARN(ret < 0, "%s: probing gpmc child %s failed\n", __func__, child->full_name)) diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index c52d8b4a3e91..828e0db3d943 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c @@ -88,72 +88,3 @@ int omap_msdi_reset(struct omap_hwmod *oh) return 0; } - -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) - -static inline void omap242x_mmc_mux(struct omap_mmc_platform_data - *mmc_controller) -{ - if ((mmc_controller->slots[0].switch_pin > 0) && \ - (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, - OMAP_PIN_INPUT_PULLUP); - if ((mmc_controller->slots[0].gpio_wp > 0) && \ - (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, - OMAP_PIN_INPUT_PULLUP); - - omap_mux_init_signal("sdmmc_cmd", 0); - omap_mux_init_signal("sdmmc_clki", 0); - omap_mux_init_signal("sdmmc_clko", 0); - omap_mux_init_signal("sdmmc_dat0", 0); - omap_mux_init_signal("sdmmc_dat_dir0", 0); - omap_mux_init_signal("sdmmc_cmd_dir", 0); - if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) { - omap_mux_init_signal("sdmmc_dat1", 0); - omap_mux_init_signal("sdmmc_dat2", 0); - omap_mux_init_signal("sdmmc_dat3", 0); - omap_mux_init_signal("sdmmc_dat_dir1", 0); - omap_mux_init_signal("sdmmc_dat_dir2", 0); - omap_mux_init_signal("sdmmc_dat_dir3", 0); - } - - /* - * Use internal loop-back in MMC/SDIO Module Input Clock - * selection - */ - if (mmc_controller->slots[0].internal_clock) { - u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - v |= (1 << 24); - omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); - } -} - -void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) -{ - struct platform_device *pdev; - struct omap_hwmod *oh; - int id = 0; - char *oh_name = "msdi1"; - char *dev_name = "mmci-omap"; - - if (!mmc_data[0]) { - pr_err("%s fails: Incomplete platform data\n", __func__); - return; - } - - omap242x_mmc_mux(mmc_data[0]); - - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return; - } - pdev = omap_device_build(dev_name, id, oh, mmc_data[0], - sizeof(struct omap_mmc_platform_data)); - if (IS_ERR(pdev)) - WARN(1, "Can'd build omap_device for %s:%s.\n", - dev_name, oh->name); -} - -#endif diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 16f78a990d04..a722330d4d53 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -7,8 +7,6 @@ * published by the Free Software Foundation. */ -#include "mux2420.h" -#include "mux2430.h" #include "mux34xx.h" #define OMAP_MUX_TERMINATOR 0xffff diff --git a/arch/arm/mach-omap2/mux2420.c b/arch/arm/mach-omap2/mux2420.c deleted file mode 100644 index cf6de0971c6c..000000000000 --- a/arch/arm/mach-omap2/mux2420.c +++ /dev/null @@ -1,690 +0,0 @@ -/* - * Copyright (C) 2010 Nokia - * Copyright (C) 2010 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/init.h> - -#include "mux.h" - -#ifdef CONFIG_OMAP_MUX - -#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ -{ \ - .reg_offset = (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET), \ - .gpio = (g), \ - .muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \ -} - -#else - -#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ -{ \ - .reg_offset = (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET), \ - .gpio = (g), \ -} - -#endif - -#define _OMAP2420_BALLENTRY(M0, bb, bt) \ -{ \ - .reg_offset = (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET), \ - .balls = { bb, bt }, \ -} - -/* - * Superset of all mux modes for omap2420 - */ -static struct omap_mux __initdata omap2420_muxmodes[] = { - _OMAP2420_MUXENTRY(CAM_D0, 54, - "cam_d0", "hw_dbg2", "sti_dout", "gpio_54", - NULL, NULL, "etk_d2", NULL), - _OMAP2420_MUXENTRY(CAM_D1, 53, - "cam_d1", "hw_dbg3", "sti_din", "gpio_53", - NULL, NULL, "etk_d3", NULL), - _OMAP2420_MUXENTRY(CAM_D2, 52, - "cam_d2", "hw_dbg4", "mcbsp1_clkx", "gpio_52", - NULL, NULL, "etk_d4", NULL), - _OMAP2420_MUXENTRY(CAM_D3, 51, - "cam_d3", "hw_dbg5", "mcbsp1_dr", "gpio_51", - NULL, NULL, "etk_d5", NULL), - _OMAP2420_MUXENTRY(CAM_D4, 50, - "cam_d4", "hw_dbg6", "mcbsp1_fsr", "gpio_50", - NULL, NULL, "etk_d6", NULL), - _OMAP2420_MUXENTRY(CAM_D5, 49, - "cam_d5", "hw_dbg7", "mcbsp1_clkr", "gpio_49", - NULL, NULL, "etk_d7", NULL), - _OMAP2420_MUXENTRY(CAM_D6, 0, - "cam_d6", "hw_dbg8", NULL, NULL, - NULL, NULL, "etk_d8", NULL), - _OMAP2420_MUXENTRY(CAM_D7, 0, - "cam_d7", "hw_dbg9", NULL, NULL, - NULL, NULL, "etk_d9", NULL), - _OMAP2420_MUXENTRY(CAM_D8, 54, - "cam_d8", "hw_dbg10", NULL, "gpio_54", - NULL, NULL, "etk_d10", NULL), - _OMAP2420_MUXENTRY(CAM_D9, 53, - "cam_d9", "hw_dbg11", NULL, "gpio_53", - NULL, NULL, "etk_d11", NULL), - _OMAP2420_MUXENTRY(CAM_HS, 55, - "cam_hs", "hw_dbg1", "mcbsp1_dx", "gpio_55", - NULL, NULL, "etk_d1", NULL), - _OMAP2420_MUXENTRY(CAM_LCLK, 57, - "cam_lclk", NULL, "mcbsp_clks", "gpio_57", - NULL, NULL, "etk_c1", NULL), - _OMAP2420_MUXENTRY(CAM_VS, 56, - "cam_vs", "hw_dbg0", "mcbsp1_fsx", "gpio_56", - NULL, NULL, "etk_d0", NULL), - _OMAP2420_MUXENTRY(CAM_XCLK, 0, - "cam_xclk", NULL, "sti_clk", NULL, - NULL, NULL, "etk_c2", NULL), - _OMAP2420_MUXENTRY(DSS_ACBIAS, 48, - "dss_acbias", NULL, "mcbsp2_fsx", "gpio_48", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(DSS_DATA10, 40, - "dss_data10", NULL, NULL, "gpio_40", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(DSS_DATA11, 41, - "dss_data11", NULL, NULL, "gpio_41", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(DSS_DATA12, 42, - "dss_data12", NULL, NULL, "gpio_42", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(DSS_DATA13, 43, - "dss_data13", NULL, NULL, "gpio_43", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(DSS_DATA14, 44, - "dss_data14", NULL, NULL, "gpio_44", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(DSS_DATA15, 45, - "dss_data15", NULL, NULL, "gpio_45", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(DSS_DATA16, 46, - "dss_data16", NULL, NULL, "gpio_46", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(DSS_DATA17, 47, - "dss_data17", NULL, NULL, "gpio_47", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(DSS_DATA8, 38, - "dss_data8", NULL, NULL, "gpio_38", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(DSS_DATA9, 39, - "dss_data9", NULL, NULL, "gpio_39", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(EAC_AC_DIN, 115, - "eac_ac_din", "mcbsp2_dr", NULL, "gpio_115", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(EAC_AC_DOUT, 116, - "eac_ac_dout", "mcbsp2_dx", NULL, "gpio_116", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(EAC_AC_FS, 114, - "eac_ac_fs", "mcbsp2_fsx", NULL, "gpio_114", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(EAC_AC_MCLK, 117, - "eac_ac_mclk", NULL, NULL, "gpio_117", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(EAC_AC_RST, 118, - "eac_ac_rst", "eac_bt_din", NULL, "gpio_118", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(EAC_AC_SCLK, 113, - "eac_ac_sclk", "mcbsp2_clkx", NULL, "gpio_113", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(EAC_BT_DIN, 73, - "eac_bt_din", NULL, NULL, "gpio_73", - NULL, NULL, "etk_d9", NULL), - _OMAP2420_MUXENTRY(EAC_BT_DOUT, 74, - "eac_bt_dout", NULL, "sti_clk", "gpio_74", - NULL, NULL, "etk_d8", NULL), - _OMAP2420_MUXENTRY(EAC_BT_FS, 72, - "eac_bt_fs", NULL, NULL, "gpio_72", - NULL, NULL, "etk_d10", NULL), - _OMAP2420_MUXENTRY(EAC_BT_SCLK, 71, - "eac_bt_sclk", NULL, NULL, "gpio_71", - NULL, NULL, "etk_d11", NULL), - _OMAP2420_MUXENTRY(GPIO_119, 119, - "gpio_119", NULL, "sti_din", "gpio_119", - NULL, "sys_boot0", "etk_d12", NULL), - _OMAP2420_MUXENTRY(GPIO_120, 120, - "gpio_120", NULL, "sti_dout", "gpio_120", - "cam_d9", "sys_boot1", "etk_d13", NULL), - _OMAP2420_MUXENTRY(GPIO_121, 121, - "gpio_121", NULL, NULL, "gpio_121", - "jtag_emu2", "sys_boot2", "etk_d14", NULL), - _OMAP2420_MUXENTRY(GPIO_122, 122, - "gpio_122", NULL, NULL, "gpio_122", - "jtag_emu3", "sys_boot3", "etk_d15", NULL), - _OMAP2420_MUXENTRY(GPIO_124, 124, - "gpio_124", NULL, NULL, "gpio_124", - NULL, "sys_boot5", NULL, NULL), - _OMAP2420_MUXENTRY(GPIO_125, 125, - "gpio_125", "sys_jtagsel1", "sys_jtagsel2", "gpio_125", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPIO_36, 36, - "gpio_36", NULL, NULL, "gpio_36", - NULL, "sys_boot4", NULL, NULL), - _OMAP2420_MUXENTRY(GPIO_62, 62, - "gpio_62", "uart1_rx", "usb1_dat", "gpio_62", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPIO_6, 6, - "gpio_6", "tv_detpulse", NULL, "gpio_6", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_A10, 3, - "gpmc_a10", NULL, "sys_ndmareq5", "gpio_3", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_A1, 12, - "gpmc_a1", "dss_data18", NULL, "gpio_12", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_A2, 11, - "gpmc_a2", "dss_data19", NULL, "gpio_11", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_A3, 10, - "gpmc_a3", "dss_data20", NULL, "gpio_10", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_A4, 9, - "gpmc_a4", "dss_data21", NULL, "gpio_9", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_A5, 8, - "gpmc_a5", "dss_data22", NULL, "gpio_8", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_A6, 7, - "gpmc_a6", "dss_data23", NULL, "gpio_7", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_A7, 6, - "gpmc_a7", NULL, "sys_ndmareq2", "gpio_6", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_A8, 5, - "gpmc_a8", NULL, "sys_ndmareq3", "gpio_5", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_A9, 4, - "gpmc_a9", NULL, "sys_ndmareq4", "gpio_4", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_CLK, 21, - "gpmc_clk", NULL, NULL, "gpio_21", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_D10, 18, - "gpmc_d10", "ssi2_rdy_rx", NULL, "gpio_18", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_D11, 17, - "gpmc_d11", "ssi2_flag_rx", NULL, "gpio_17", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_D12, 16, - "gpmc_d12", "ssi2_dat_rx", NULL, "gpio_16", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_D13, 15, - "gpmc_d13", "ssi2_rdy_tx", NULL, "gpio_15", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_D14, 14, - "gpmc_d14", "ssi2_flag_tx", NULL, "gpio_14", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_D15, 13, - "gpmc_d15", "ssi2_dat_tx", NULL, "gpio_13", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_D8, 20, - "gpmc_d8", NULL, NULL, "gpio_20", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_D9, 19, - "gpmc_d9", "ssi2_wake", NULL, "gpio_19", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_NBE0, 29, - "gpmc_nbe0", NULL, NULL, "gpio_29", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_NBE1, 30, - "gpmc_nbe1", NULL, NULL, "gpio_30", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_NCS1, 22, - "gpmc_ncs1", NULL, NULL, "gpio_22", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_NCS2, 23, - "gpmc_ncs2", NULL, NULL, "gpio_23", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_NCS3, 24, - "gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_NCS4, 25, - "gpmc_ncs4", NULL, NULL, "gpio_25", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_NCS5, 26, - "gpmc_ncs5", NULL, NULL, "gpio_26", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_NCS6, 27, - "gpmc_ncs6", NULL, NULL, "gpio_27", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_NCS7, 28, - "gpmc_ncs7", "gpmc_io_dir", "gpio_28", NULL, - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_NWP, 31, - "gpmc_nwp", NULL, NULL, "gpio_31", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_WAIT1, 33, - "gpmc_wait1", NULL, NULL, "gpio_33", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_WAIT2, 34, - "gpmc_wait2", NULL, NULL, "gpio_34", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(GPMC_WAIT3, 35, - "gpmc_wait3", NULL, NULL, "gpio_35", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(HDQ_SIO, 101, - "hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(I2C2_SCL, 99, - "i2c2_scl", NULL, "gpt9_pwm_evt", "gpio_99", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(I2C2_SDA, 100, - "i2c2_sda", NULL, "spi2_ncs1", "gpio_100", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(JTAG_EMU0, 127, - "jtag_emu0", NULL, NULL, "gpio_127", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(JTAG_EMU1, 126, - "jtag_emu1", NULL, NULL, "gpio_126", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MCBSP1_CLKR, 92, - "mcbsp1_clkr", "ssi2_dat_tx", "vlynq_tx1", "gpio_92", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MCBSP1_CLKX, 98, - "mcbsp1_clkx", "ssi2_wake", "vlynq_nla", "gpio_98", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MCBSP1_DR, 95, - "mcbsp1_dr", "ssi2_dat_rx", "vlynq_rx1", "gpio_95", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MCBSP1_DX, 94, - "mcbsp1_dx", "ssi2_rdy_tx", "vlynq_clk", "gpio_94", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MCBSP1_FSR, 93, - "mcbsp1_fsr", "ssi2_flag_tx", "vlynq_tx0", "gpio_93", - "spi2_ncs1", NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MCBSP1_FSX, 97, - "mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MCBSP2_CLKX, 12, - "mcbsp2_clkx", NULL, "dss_data23", "gpio_12", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MCBSP2_DR, 11, - "mcbsp2_dr", NULL, "dss_data22", "gpio_11", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MCBSP_CLKS, 96, - "mcbsp_clks", "ssi2_flag_rx", "vlynq_rx0", "gpio_96", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MMC_CLKI, 59, - "sdmmc_clki", "ms_clki", NULL, "gpio_59", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MMC_CLKO, 0, - "sdmmc_clko", "ms_clko", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MMC_CMD_DIR, 8, - "sdmmc_cmd_dir", NULL, NULL, "gpio_8", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MMC_CMD, 0, - "sdmmc_cmd", "ms_bs", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MMC_DAT_DIR0, 7, - "sdmmc_dat_dir0", "ms_dat0_dir", NULL, "gpio_7", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MMC_DAT0, 0, - "sdmmc_dat0", "ms_dat0", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MMC_DAT_DIR1, 78, - "sdmmc_dat_dir1", "ms_datu_dir", "uart2_rts", "gpio_78", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MMC_DAT1, 75, - "sdmmc_dat1", "ms_dat1", NULL, "gpio_75", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MMC_DAT_DIR2, 79, - "sdmmc_dat_dir2", "ms_datu_dir", "uart2_tx", "gpio_79", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MMC_DAT2, 76, - "sdmmc_dat2", "ms_dat2", "uart2_cts", "gpio_76", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MMC_DAT_DIR3, 80, - "sdmmc_dat_dir3", "ms_datu_dir", "uart2_rx", "gpio_80", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(MMC_DAT3, 77, - "sdmmc_dat3", "ms_dat3", NULL, "gpio_77", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SDRC_A12, 2, - "sdrc_a12", NULL, NULL, "gpio_2", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SDRC_A13, 1, - "sdrc_a13", NULL, NULL, "gpio_1", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SDRC_A14, 0, - "sdrc_a14", NULL, NULL, "gpio_0", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SDRC_CKE1, 38, - "sdrc_cke1", NULL, NULL, "gpio_38", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SDRC_NCS1, 37, - "sdrc_ncs1", NULL, NULL, "gpio_37", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SPI1_CLK, 81, - "spi1_clk", NULL, NULL, "gpio_81", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SPI1_NCS0, 84, - "spi1_ncs0", NULL, NULL, "gpio_84", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SPI1_NCS1, 85, - "spi1_ncs1", NULL, NULL, "gpio_85", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SPI1_NCS2, 86, - "spi1_ncs2", NULL, NULL, "gpio_86", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SPI1_NCS3, 87, - "spi1_ncs3", NULL, NULL, "gpio_87", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SPI1_SIMO, 82, - "spi1_simo", NULL, NULL, "gpio_82", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SPI1_SOMI, 83, - "spi1_somi", NULL, NULL, "gpio_83", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SPI2_CLK, 88, - "spi2_clk", NULL, NULL, "gpio_88", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SPI2_NCS0, 91, - "spi2_ncs0", "gpt12_pwm_evt", NULL, "gpio_91", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SPI2_SIMO, 89, - "spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SPI2_SOMI, 90, - "spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SSI1_DAT_RX, 63, - "ssi1_dat_rx", "eac_md_sclk", NULL, "gpio_63", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SSI1_DAT_TX, 59, - "ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SSI1_FLAG_RX, 64, - "ssi1_flag_rx", "eac_md_din", NULL, "gpio_64", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SSI1_FLAG_TX, 25, - "ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_25", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SSI1_RDY_RX, 65, - "ssi1_rdy_rx", "eac_md_dout", NULL, "gpio_65", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SSI1_RDY_TX, 61, - "ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SSI1_WAKE, 66, - "ssi1_wake", "eac_md_fs", NULL, "gpio_66", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SYS_CLKOUT, 123, - "sys_clkout", NULL, NULL, "gpio_123", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SYS_CLKREQ, 52, - "sys_clkreq", NULL, NULL, "gpio_52", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(SYS_NIRQ, 60, - "sys_nirq", NULL, NULL, "gpio_60", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(UART1_CTS, 32, - "uart1_cts", NULL, "dss_data18", "gpio_32", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(UART1_RTS, 8, - "uart1_rts", NULL, "dss_data19", "gpio_8", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(UART1_RX, 10, - "uart1_rx", NULL, "dss_data21", "gpio_10", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(UART1_TX, 9, - "uart1_tx", NULL, "dss_data20", "gpio_9", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(UART2_CTS, 67, - "uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(UART2_RTS, 68, - "uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(UART2_RX, 70, - "uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(UART2_TX, 69, - "uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(UART3_CTS_RCTX, 102, - "uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(UART3_RTS_SD, 103, - "uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(UART3_RX_IRRX, 105, - "uart3_rx_irrx", NULL, NULL, "gpio_105", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(UART3_TX_IRTX, 104, - "uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(USB0_DAT, 112, - "usb0_dat", "uart3_rx_irrx", "uart2_rx", "gpio_112", - "uart2_tx", NULL, NULL, NULL), - _OMAP2420_MUXENTRY(USB0_PUEN, 106, - "usb0_puen", "mcbsp2_dx", NULL, "gpio_106", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(USB0_RCV, 109, - "usb0_rcv", "mcbsp2_fsx", NULL, "gpio_109", - "uart2_cts", NULL, NULL, NULL), - _OMAP2420_MUXENTRY(USB0_SE0, 111, - "usb0_se0", "uart3_tx_irtx", "uart2_tx", "gpio_111", - "uart2_rx", NULL, NULL, NULL), - _OMAP2420_MUXENTRY(USB0_TXEN, 110, - "usb0_txen", "uart3_cts_rctx", "uart2_cts", "gpio_110", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(USB0_VM, 108, - "usb0_vm", "mcbsp2_clkx", NULL, "gpio_108", - "uart2_rx", NULL, NULL, NULL), - _OMAP2420_MUXENTRY(USB0_VP, 107, - "usb0_vp", "mcbsp2_dr", NULL, "gpio_107", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(VLYNQ_CLK, 13, - "vlynq_clk", "usb2_se0", "sys_ndmareq0", "gpio_13", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(VLYNQ_NLA, 58, - "vlynq_nla", NULL, NULL, "gpio_58", - "cam_d6", NULL, NULL, NULL), - _OMAP2420_MUXENTRY(VLYNQ_RX0, 15, - "vlynq_rx0", "usb2_tllse0", NULL, "gpio_15", - "cam_d7", NULL, NULL, NULL), - _OMAP2420_MUXENTRY(VLYNQ_RX1, 14, - "vlynq_rx1", "usb2_rcv", "sys_ndmareq1", "gpio_14", - "cam_d8", NULL, NULL, NULL), - _OMAP2420_MUXENTRY(VLYNQ_TX0, 17, - "vlynq_tx0", "usb2_txen", NULL, "gpio_17", - NULL, NULL, NULL, NULL), - _OMAP2420_MUXENTRY(VLYNQ_TX1, 16, - "vlynq_tx1", "usb2_dat", "sys_clkout2", "gpio_16", - NULL, NULL, NULL, NULL), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -/* - * Balls for 447-pin POP package - */ -#ifdef CONFIG_DEBUG_FS -static struct omap_ball __initdata omap2420_pop_ball[] = { - _OMAP2420_BALLENTRY(CAM_D0, "y4", NULL), - _OMAP2420_BALLENTRY(CAM_D1, "y3", NULL), - _OMAP2420_BALLENTRY(CAM_D2, "u7", NULL), - _OMAP2420_BALLENTRY(CAM_D3, "ab3", NULL), - _OMAP2420_BALLENTRY(CAM_D4, "v2", NULL), - _OMAP2420_BALLENTRY(CAM_D5, "ad3", NULL), - _OMAP2420_BALLENTRY(CAM_D6, "aa4", NULL), - _OMAP2420_BALLENTRY(CAM_D7, "ab4", NULL), - _OMAP2420_BALLENTRY(CAM_D8, "ac6", NULL), - _OMAP2420_BALLENTRY(CAM_D9, "ac7", NULL), - _OMAP2420_BALLENTRY(CAM_HS, "v4", NULL), - _OMAP2420_BALLENTRY(CAM_LCLK, "ad6", NULL), - _OMAP2420_BALLENTRY(CAM_VS, "p7", NULL), - _OMAP2420_BALLENTRY(CAM_XCLK, "w4", NULL), - _OMAP2420_BALLENTRY(DSS_ACBIAS, "ae8", NULL), - _OMAP2420_BALLENTRY(DSS_DATA10, "ac12", NULL), - _OMAP2420_BALLENTRY(DSS_DATA11, "ae11", NULL), - _OMAP2420_BALLENTRY(DSS_DATA12, "ae13", NULL), - _OMAP2420_BALLENTRY(DSS_DATA13, "ad13", NULL), - _OMAP2420_BALLENTRY(DSS_DATA14, "ac13", NULL), - _OMAP2420_BALLENTRY(DSS_DATA15, "y12", NULL), - _OMAP2420_BALLENTRY(DSS_DATA16, "ad14", NULL), - _OMAP2420_BALLENTRY(DSS_DATA17, "y13", NULL), - _OMAP2420_BALLENTRY(DSS_DATA8, "ad11", NULL), - _OMAP2420_BALLENTRY(DSS_DATA9, "ad12", NULL), - _OMAP2420_BALLENTRY(EAC_AC_DIN, "ad19", NULL), - _OMAP2420_BALLENTRY(EAC_AC_DOUT, "af22", NULL), - _OMAP2420_BALLENTRY(EAC_AC_FS, "ad16", NULL), - _OMAP2420_BALLENTRY(EAC_AC_MCLK, "y17", NULL), - _OMAP2420_BALLENTRY(EAC_AC_RST, "ae22", NULL), - _OMAP2420_BALLENTRY(EAC_AC_SCLK, "ac18", NULL), - _OMAP2420_BALLENTRY(EAC_BT_DIN, "u8", NULL), - _OMAP2420_BALLENTRY(EAC_BT_DOUT, "ad5", NULL), - _OMAP2420_BALLENTRY(EAC_BT_FS, "w7", NULL), - _OMAP2420_BALLENTRY(EAC_BT_SCLK, "ad4", NULL), - _OMAP2420_BALLENTRY(GPIO_119, "af6", NULL), - _OMAP2420_BALLENTRY(GPIO_120, "af4", NULL), - _OMAP2420_BALLENTRY(GPIO_121, "ae6", NULL), - _OMAP2420_BALLENTRY(GPIO_122, "w3", NULL), - _OMAP2420_BALLENTRY(GPIO_124, "y19", NULL), - _OMAP2420_BALLENTRY(GPIO_125, "ae24", NULL), - _OMAP2420_BALLENTRY(GPIO_36, "y18", NULL), - _OMAP2420_BALLENTRY(GPIO_6, "d6", NULL), - _OMAP2420_BALLENTRY(GPIO_62, "ad18", NULL), - _OMAP2420_BALLENTRY(GPMC_A1, "m8", NULL), - _OMAP2420_BALLENTRY(GPMC_A10, "d5", NULL), - _OMAP2420_BALLENTRY(GPMC_A2, "w9", NULL), - _OMAP2420_BALLENTRY(GPMC_A3, "af10", NULL), - _OMAP2420_BALLENTRY(GPMC_A4, "w8", NULL), - _OMAP2420_BALLENTRY(GPMC_A5, "ae16", NULL), - _OMAP2420_BALLENTRY(GPMC_A6, "af9", NULL), - _OMAP2420_BALLENTRY(GPMC_A7, "e4", NULL), - _OMAP2420_BALLENTRY(GPMC_A8, "j7", NULL), - _OMAP2420_BALLENTRY(GPMC_A9, "ae18", NULL), - _OMAP2420_BALLENTRY(GPMC_CLK, "p1", "l1"), - _OMAP2420_BALLENTRY(GPMC_D10, "t1", "n1"), - _OMAP2420_BALLENTRY(GPMC_D11, "u2", "p2"), - _OMAP2420_BALLENTRY(GPMC_D12, "u1", "p1"), - _OMAP2420_BALLENTRY(GPMC_D13, "p2", "m1"), - _OMAP2420_BALLENTRY(GPMC_D14, "h2", "j2"), - _OMAP2420_BALLENTRY(GPMC_D15, "h1", "k2"), - _OMAP2420_BALLENTRY(GPMC_D8, "v1", "r1"), - _OMAP2420_BALLENTRY(GPMC_D9, "y1", "t1"), - _OMAP2420_BALLENTRY(GPMC_NBE0, "af12", "aa10"), - _OMAP2420_BALLENTRY(GPMC_NBE1, "u3", NULL), - _OMAP2420_BALLENTRY(GPMC_NCS1, "af14", "w1"), - _OMAP2420_BALLENTRY(GPMC_NCS2, "g4", NULL), - _OMAP2420_BALLENTRY(GPMC_NCS3, "t8", NULL), - _OMAP2420_BALLENTRY(GPMC_NCS4, "h8", NULL), - _OMAP2420_BALLENTRY(GPMC_NCS5, "k3", NULL), - _OMAP2420_BALLENTRY(GPMC_NCS6, "m7", NULL), - _OMAP2420_BALLENTRY(GPMC_NCS7, "p3", NULL), - _OMAP2420_BALLENTRY(GPMC_NWP, "ae15", "y5"), - _OMAP2420_BALLENTRY(GPMC_WAIT1, "ae20", "y8"), - _OMAP2420_BALLENTRY(GPMC_WAIT2, "n2", NULL), - _OMAP2420_BALLENTRY(GPMC_WAIT3, "t4", NULL), - _OMAP2420_BALLENTRY(HDQ_SIO, "t23", NULL), - _OMAP2420_BALLENTRY(I2C2_SCL, "l2", NULL), - _OMAP2420_BALLENTRY(I2C2_SDA, "k19", NULL), - _OMAP2420_BALLENTRY(JTAG_EMU0, "n24", NULL), - _OMAP2420_BALLENTRY(JTAG_EMU1, "ac22", NULL), - _OMAP2420_BALLENTRY(MCBSP1_CLKR, "y24", NULL), - _OMAP2420_BALLENTRY(MCBSP1_CLKX, "t19", NULL), - _OMAP2420_BALLENTRY(MCBSP1_DR, "u23", NULL), - _OMAP2420_BALLENTRY(MCBSP1_DX, "r24", NULL), - _OMAP2420_BALLENTRY(MCBSP1_FSR, "r20", NULL), - _OMAP2420_BALLENTRY(MCBSP1_FSX, "r23", NULL), - _OMAP2420_BALLENTRY(MCBSP2_CLKX, "t24", NULL), - _OMAP2420_BALLENTRY(MCBSP2_DR, "p20", NULL), - _OMAP2420_BALLENTRY(MCBSP_CLKS, "p23", NULL), - _OMAP2420_BALLENTRY(MMC_CLKI, "c23", NULL), - _OMAP2420_BALLENTRY(MMC_CLKO, "h23", NULL), - _OMAP2420_BALLENTRY(MMC_CMD, "j23", NULL), - _OMAP2420_BALLENTRY(MMC_CMD_DIR, "j24", NULL), - _OMAP2420_BALLENTRY(MMC_DAT0, "h17", NULL), - _OMAP2420_BALLENTRY(MMC_DAT_DIR0, "f23", NULL), - _OMAP2420_BALLENTRY(MMC_DAT1, "g19", NULL), - _OMAP2420_BALLENTRY(MMC_DAT_DIR1, "d23", NULL), - _OMAP2420_BALLENTRY(MMC_DAT2, "h20", NULL), - _OMAP2420_BALLENTRY(MMC_DAT_DIR2, "g23", NULL), - _OMAP2420_BALLENTRY(MMC_DAT3, "d24", NULL), - _OMAP2420_BALLENTRY(MMC_DAT_DIR3, "e23", NULL), - _OMAP2420_BALLENTRY(SDRC_A12, "w26", "r21"), - _OMAP2420_BALLENTRY(SDRC_A13, "w25", "aa15"), - _OMAP2420_BALLENTRY(SDRC_A14, "aa26", "y12"), - _OMAP2420_BALLENTRY(SDRC_CKE1, "ae25", "y13"), - _OMAP2420_BALLENTRY(SDRC_NCS1, "y25", "t20"), - _OMAP2420_BALLENTRY(SPI1_CLK, "y23", NULL), - _OMAP2420_BALLENTRY(SPI1_NCS0, "w24", NULL), - _OMAP2420_BALLENTRY(SPI1_NCS1, "w23", NULL), - _OMAP2420_BALLENTRY(SPI1_NCS2, "v23", NULL), - _OMAP2420_BALLENTRY(SPI1_NCS3, "u20", NULL), - _OMAP2420_BALLENTRY(SPI1_SIMO, "h10", NULL), - _OMAP2420_BALLENTRY(SPI1_SOMI, "v19", NULL), - _OMAP2420_BALLENTRY(SPI2_CLK, "v24", NULL), - _OMAP2420_BALLENTRY(SPI2_NCS0, "aa24", NULL), - _OMAP2420_BALLENTRY(SPI2_SIMO, "u24", NULL), - _OMAP2420_BALLENTRY(SPI2_SOMI, "v25", NULL), - _OMAP2420_BALLENTRY(SSI1_DAT_RX, "w15", NULL), - _OMAP2420_BALLENTRY(SSI1_DAT_TX, "w13", NULL), - _OMAP2420_BALLENTRY(SSI1_FLAG_RX, "af11", NULL), - _OMAP2420_BALLENTRY(SSI1_FLAG_TX, "ac15", NULL), - _OMAP2420_BALLENTRY(SSI1_RDY_RX, "ac16", NULL), - _OMAP2420_BALLENTRY(SSI1_RDY_TX, "af15", NULL), - _OMAP2420_BALLENTRY(SSI1_WAKE, "ad15", NULL), - _OMAP2420_BALLENTRY(SYS_CLKOUT, "ae19", NULL), - _OMAP2420_BALLENTRY(SYS_CLKREQ, "ad20", NULL), - _OMAP2420_BALLENTRY(SYS_NIRQ, "y20", NULL), - _OMAP2420_BALLENTRY(UART1_CTS, "g20", NULL), - _OMAP2420_BALLENTRY(UART1_RTS, "k20", NULL), - _OMAP2420_BALLENTRY(UART1_RX, "t20", NULL), - _OMAP2420_BALLENTRY(UART1_TX, "h12", NULL), - _OMAP2420_BALLENTRY(UART2_CTS, "ac24", NULL), - _OMAP2420_BALLENTRY(UART2_RTS, "w20", NULL), - _OMAP2420_BALLENTRY(UART2_RX, "ad24", NULL), - _OMAP2420_BALLENTRY(UART2_TX, "ab24", NULL), - _OMAP2420_BALLENTRY(UART3_CTS_RCTX, "k24", NULL), - _OMAP2420_BALLENTRY(UART3_RTS_SD, "m20", NULL), - _OMAP2420_BALLENTRY(UART3_RX_IRRX, "h24", NULL), - _OMAP2420_BALLENTRY(UART3_TX_IRTX, "g24", NULL), - _OMAP2420_BALLENTRY(USB0_DAT, "j25", NULL), - _OMAP2420_BALLENTRY(USB0_PUEN, "l23", NULL), - _OMAP2420_BALLENTRY(USB0_RCV, "k23", NULL), - _OMAP2420_BALLENTRY(USB0_SE0, "l24", NULL), - _OMAP2420_BALLENTRY(USB0_TXEN, "m24", NULL), - _OMAP2420_BALLENTRY(USB0_VM, "n23", NULL), - _OMAP2420_BALLENTRY(USB0_VP, "m23", NULL), - _OMAP2420_BALLENTRY(VLYNQ_CLK, "w12", NULL), - _OMAP2420_BALLENTRY(VLYNQ_NLA, "ae10", NULL), - _OMAP2420_BALLENTRY(VLYNQ_RX0, "ad7", NULL), - _OMAP2420_BALLENTRY(VLYNQ_RX1, "w10", NULL), - _OMAP2420_BALLENTRY(VLYNQ_TX0, "y15", NULL), - _OMAP2420_BALLENTRY(VLYNQ_TX1, "w14", NULL), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#else -#define omap2420_pop_ball NULL -#endif - -int __init omap2420_mux_init(struct omap_board_mux *board_subset, int flags) -{ - struct omap_ball *package_balls = NULL; - - switch (flags & OMAP_PACKAGE_MASK) { - case OMAP_PACKAGE_ZAC: - package_balls = omap2420_pop_ball; - break; - case OMAP_PACKAGE_ZAF: - /* REVISIT: Please add data */ - default: - pr_warning("%s: No ball data available for omap2420 package\n", - __func__); - } - - return omap_mux_init("core", OMAP_MUX_REG_8BIT | OMAP_MUX_GPIO_IN_MODE3, - OMAP2420_CONTROL_PADCONF_MUX_PBASE, - OMAP2420_CONTROL_PADCONF_MUX_SIZE, - omap2420_muxmodes, NULL, board_subset, - package_balls); -} diff --git a/arch/arm/mach-omap2/mux2420.h b/arch/arm/mach-omap2/mux2420.h deleted file mode 100644 index 0f555aa847b5..000000000000 --- a/arch/arm/mach-omap2/mux2420.h +++ /dev/null @@ -1,282 +0,0 @@ -/* - * Copyright (C) 2009 Nokia - * Copyright (C) 2009 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define OMAP2420_CONTROL_PADCONF_MUX_PBASE 0x48000030LU - -#define OMAP2420_MUX(mode0, mux_value) \ -{ \ - .reg_offset = (OMAP2420_CONTROL_PADCONF_##mode0##_OFFSET), \ - .value = (mux_value), \ -} - -/* - * OMAP2420 CONTROL_PADCONF* register offsets for pin-muxing - * - * Extracted from the TRM. Add 0x48000030 to these values to get the - * absolute addresses. The name in the macro is the mode-0 name of - * the pin. NOTE: These registers are 8-bits wide. - */ -#define OMAP2420_CONTROL_PADCONF_SDRC_A14_OFFSET 0x000 -#define OMAP2420_CONTROL_PADCONF_SDRC_A13_OFFSET 0x001 -#define OMAP2420_CONTROL_PADCONF_SDRC_A12_OFFSET 0x002 -#define OMAP2420_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x003 -#define OMAP2420_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x004 -#define OMAP2420_CONTROL_PADCONF_SDRC_A11_OFFSET 0x005 -#define OMAP2420_CONTROL_PADCONF_SDRC_A10_OFFSET 0x006 -#define OMAP2420_CONTROL_PADCONF_SDRC_A9_OFFSET 0x007 -#define OMAP2420_CONTROL_PADCONF_SDRC_A8_OFFSET 0x008 -#define OMAP2420_CONTROL_PADCONF_SDRC_A7_OFFSET 0x009 -#define OMAP2420_CONTROL_PADCONF_SDRC_A6_OFFSET 0x00a -#define OMAP2420_CONTROL_PADCONF_SDRC_A5_OFFSET 0x00b -#define OMAP2420_CONTROL_PADCONF_SDRC_A4_OFFSET 0x00c -#define OMAP2420_CONTROL_PADCONF_SDRC_A3_OFFSET 0x00d -#define OMAP2420_CONTROL_PADCONF_SDRC_A2_OFFSET 0x00e -#define OMAP2420_CONTROL_PADCONF_SDRC_A1_OFFSET 0x00f -#define OMAP2420_CONTROL_PADCONF_SDRC_A0_OFFSET 0x010 -#define OMAP2420_CONTROL_PADCONF_SDRC_D31_OFFSET 0x021 -#define OMAP2420_CONTROL_PADCONF_SDRC_D30_OFFSET 0x022 -#define OMAP2420_CONTROL_PADCONF_SDRC_D29_OFFSET 0x023 -#define OMAP2420_CONTROL_PADCONF_SDRC_D28_OFFSET 0x024 -#define OMAP2420_CONTROL_PADCONF_SDRC_D27_OFFSET 0x025 -#define OMAP2420_CONTROL_PADCONF_SDRC_D26_OFFSET 0x026 -#define OMAP2420_CONTROL_PADCONF_SDRC_D25_OFFSET 0x027 -#define OMAP2420_CONTROL_PADCONF_SDRC_D24_OFFSET 0x028 -#define OMAP2420_CONTROL_PADCONF_SDRC_D23_OFFSET 0x029 -#define OMAP2420_CONTROL_PADCONF_SDRC_D22_OFFSET 0x02a -#define OMAP2420_CONTROL_PADCONF_SDRC_D21_OFFSET 0x02b -#define OMAP2420_CONTROL_PADCONF_SDRC_D20_OFFSET 0x02c -#define OMAP2420_CONTROL_PADCONF_SDRC_D19_OFFSET 0x02d -#define OMAP2420_CONTROL_PADCONF_SDRC_D18_OFFSET 0x02e -#define OMAP2420_CONTROL_PADCONF_SDRC_D17_OFFSET 0x02f -#define OMAP2420_CONTROL_PADCONF_SDRC_D16_OFFSET 0x030 -#define OMAP2420_CONTROL_PADCONF_SDRC_D15_OFFSET 0x031 -#define OMAP2420_CONTROL_PADCONF_SDRC_D14_OFFSET 0x032 -#define OMAP2420_CONTROL_PADCONF_SDRC_D13_OFFSET 0x033 -#define OMAP2420_CONTROL_PADCONF_SDRC_D12_OFFSET 0x034 -#define OMAP2420_CONTROL_PADCONF_SDRC_D11_OFFSET 0x035 -#define OMAP2420_CONTROL_PADCONF_SDRC_D10_OFFSET 0x036 -#define OMAP2420_CONTROL_PADCONF_SDRC_D9_OFFSET 0x037 -#define OMAP2420_CONTROL_PADCONF_SDRC_D8_OFFSET 0x038 -#define OMAP2420_CONTROL_PADCONF_SDRC_D7_OFFSET 0x039 -#define OMAP2420_CONTROL_PADCONF_SDRC_D6_OFFSET 0x03a -#define OMAP2420_CONTROL_PADCONF_SDRC_D5_OFFSET 0x03b -#define OMAP2420_CONTROL_PADCONF_SDRC_D4_OFFSET 0x03c -#define OMAP2420_CONTROL_PADCONF_SDRC_D3_OFFSET 0x03d -#define OMAP2420_CONTROL_PADCONF_SDRC_D2_OFFSET 0x03e -#define OMAP2420_CONTROL_PADCONF_SDRC_D1_OFFSET 0x03f -#define OMAP2420_CONTROL_PADCONF_SDRC_D0_OFFSET 0x040 -#define OMAP2420_CONTROL_PADCONF_GPMC_A10_OFFSET 0x041 -#define OMAP2420_CONTROL_PADCONF_GPMC_A9_OFFSET 0x042 -#define OMAP2420_CONTROL_PADCONF_GPMC_A8_OFFSET 0x043 -#define OMAP2420_CONTROL_PADCONF_GPMC_A7_OFFSET 0x044 -#define OMAP2420_CONTROL_PADCONF_GPMC_A6_OFFSET 0x045 -#define OMAP2420_CONTROL_PADCONF_GPMC_A5_OFFSET 0x046 -#define OMAP2420_CONTROL_PADCONF_GPMC_A4_OFFSET 0x047 -#define OMAP2420_CONTROL_PADCONF_GPMC_A3_OFFSET 0x048 -#define OMAP2420_CONTROL_PADCONF_GPMC_A2_OFFSET 0x049 -#define OMAP2420_CONTROL_PADCONF_GPMC_A1_OFFSET 0x04a -#define OMAP2420_CONTROL_PADCONF_GPMC_D15_OFFSET 0x04b -#define OMAP2420_CONTROL_PADCONF_GPMC_D14_OFFSET 0x04c -#define OMAP2420_CONTROL_PADCONF_GPMC_D13_OFFSET 0x04d -#define OMAP2420_CONTROL_PADCONF_GPMC_D12_OFFSET 0x04e -#define OMAP2420_CONTROL_PADCONF_GPMC_D11_OFFSET 0x04f -#define OMAP2420_CONTROL_PADCONF_GPMC_D10_OFFSET 0x050 -#define OMAP2420_CONTROL_PADCONF_GPMC_D9_OFFSET 0x051 -#define OMAP2420_CONTROL_PADCONF_GPMC_D8_OFFSET 0x052 -#define OMAP2420_CONTROL_PADCONF_GPMC_D7_OFFSET 0x053 -#define OMAP2420_CONTROL_PADCONF_GPMC_D6_OFFSET 0x054 -#define OMAP2420_CONTROL_PADCONF_GPMC_D5_OFFSET 0x055 -#define OMAP2420_CONTROL_PADCONF_GPMC_D4_OFFSET 0x056 -#define OMAP2420_CONTROL_PADCONF_GPMC_D3_OFFSET 0x057 -#define OMAP2420_CONTROL_PADCONF_GPMC_D2_OFFSET 0x058 -#define OMAP2420_CONTROL_PADCONF_GPMC_D1_OFFSET 0x059 -#define OMAP2420_CONTROL_PADCONF_GPMC_D0_OFFSET 0x05a -#define OMAP2420_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x05b -#define OMAP2420_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x05c -#define OMAP2420_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x05d -#define OMAP2420_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x05e -#define OMAP2420_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x05f -#define OMAP2420_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x060 -#define OMAP2420_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x061 -#define OMAP2420_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x062 -#define OMAP2420_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x063 -#define OMAP2420_CONTROL_PADCONF_GPMC_NALE_ALE_OFFSET 0x064 -#define OMAP2420_CONTROL_PADCONF_GPMC_NOE_OFFSET 0x065 -#define OMAP2420_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x066 -#define OMAP2420_CONTROL_PADCONF_GPMC_NBE0_OFFSET 0x067 -#define OMAP2420_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x068 -#define OMAP2420_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x069 -#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x06a -#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x06b -#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x06c -#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x06d -#define OMAP2420_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x06e -#define OMAP2420_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x06f -#define OMAP2420_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x070 -#define OMAP2420_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x071 -#define OMAP2420_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x072 -#define OMAP2420_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x073 -#define OMAP2420_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x074 -#define OMAP2420_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x075 -#define OMAP2420_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x076 -#define OMAP2420_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x077 -#define OMAP2420_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x078 -#define OMAP2420_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x079 -#define OMAP2420_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x07a -#define OMAP2420_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x07f -#define OMAP2420_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x080 -#define OMAP2420_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x081 -#define OMAP2420_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x082 -#define OMAP2420_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x083 -#define OMAP2420_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x084 -#define OMAP2420_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x085 -#define OMAP2420_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x086 -#define OMAP2420_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x087 -#define OMAP2420_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x088 -#define OMAP2420_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x089 -#define OMAP2420_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x08a -#define OMAP2420_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x08b -#define OMAP2420_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x08c -#define OMAP2420_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x08d -#define OMAP2420_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x08e -#define OMAP2420_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x08f -#define OMAP2420_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x090 -#define OMAP2420_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x091 -#define OMAP2420_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x092 -#define OMAP2420_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x093 -#define OMAP2420_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x094 -#define OMAP2420_CONTROL_PADCONF_UART1_CTS_OFFSET 0x095 -#define OMAP2420_CONTROL_PADCONF_UART1_RTS_OFFSET 0x096 -#define OMAP2420_CONTROL_PADCONF_UART1_TX_OFFSET 0x097 -#define OMAP2420_CONTROL_PADCONF_UART1_RX_OFFSET 0x098 -#define OMAP2420_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x099 -#define OMAP2420_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x09a -#define OMAP2420_CONTROL_PADCONF_DSS_PCL_OFFSET 0x09b -#define OMAP2420_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x09c -#define OMAP2420_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x09d -#define OMAP2420_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x09e -#define OMAP2420_CONTROL_PADCONF_CAM_D9_OFFSET 0x09f -#define OMAP2420_CONTROL_PADCONF_CAM_D8_OFFSET 0x0a0 -#define OMAP2420_CONTROL_PADCONF_CAM_D7_OFFSET 0x0a1 -#define OMAP2420_CONTROL_PADCONF_CAM_D6_OFFSET 0x0a2 -#define OMAP2420_CONTROL_PADCONF_CAM_D5_OFFSET 0x0a3 -#define OMAP2420_CONTROL_PADCONF_CAM_D4_OFFSET 0x0a4 -#define OMAP2420_CONTROL_PADCONF_CAM_D3_OFFSET 0x0a5 -#define OMAP2420_CONTROL_PADCONF_CAM_D2_OFFSET 0x0a6 -#define OMAP2420_CONTROL_PADCONF_CAM_D1_OFFSET 0x0a7 -#define OMAP2420_CONTROL_PADCONF_CAM_D0_OFFSET 0x0a8 -#define OMAP2420_CONTROL_PADCONF_CAM_HS_OFFSET 0x0a9 -#define OMAP2420_CONTROL_PADCONF_CAM_VS_OFFSET 0x0aa -#define OMAP2420_CONTROL_PADCONF_CAM_LCLK_OFFSET 0x0ab -#define OMAP2420_CONTROL_PADCONF_CAM_XCLK_OFFSET 0x0ac -#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET 0x0ad -#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET 0x0ae -#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET 0x0af -#define OMAP2420_CONTROL_PADCONF_GPIO_62_OFFSET 0x0b0 -#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET 0x0b1 -#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET 0x0b2 -#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET 0x0b3 -#define OMAP2420_CONTROL_PADCONF_SSI1_WAKE_OFFSET 0x0b4 -#define OMAP2420_CONTROL_PADCONF_VLYNQ_CLK_OFFSET 0x0b5 -#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX1_OFFSET 0x0b6 -#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX0_OFFSET 0x0b7 -#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX1_OFFSET 0x0b8 -#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX0_OFFSET 0x0b9 -#define OMAP2420_CONTROL_PADCONF_VLYNQ_NLA_OFFSET 0x0ba -#define OMAP2420_CONTROL_PADCONF_UART2_CTS_OFFSET 0x0bb -#define OMAP2420_CONTROL_PADCONF_UART2_RTS_OFFSET 0x0bc -#define OMAP2420_CONTROL_PADCONF_UART2_TX_OFFSET 0x0bd -#define OMAP2420_CONTROL_PADCONF_UART2_RX_OFFSET 0x0be -#define OMAP2420_CONTROL_PADCONF_EAC_BT_SCLK_OFFSET 0x0bf -#define OMAP2420_CONTROL_PADCONF_EAC_BT_FS_OFFSET 0x0c0 -#define OMAP2420_CONTROL_PADCONF_EAC_BT_DIN_OFFSET 0x0c1 -#define OMAP2420_CONTROL_PADCONF_EAC_BT_DOUT_OFFSET 0x0c2 -#define OMAP2420_CONTROL_PADCONF_MMC_CLKO_OFFSET 0x0c3 -#define OMAP2420_CONTROL_PADCONF_MMC_CMD_OFFSET 0x0c4 -#define OMAP2420_CONTROL_PADCONF_MMC_DAT0_OFFSET 0x0c5 -#define OMAP2420_CONTROL_PADCONF_MMC_DAT1_OFFSET 0x0c6 -#define OMAP2420_CONTROL_PADCONF_MMC_DAT2_OFFSET 0x0c7 -#define OMAP2420_CONTROL_PADCONF_MMC_DAT3_OFFSET 0x0c8 -#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR0_OFFSET 0x0c9 -#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR1_OFFSET 0x0ca -#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR2_OFFSET 0x0cb -#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR3_OFFSET 0x0cc -#define OMAP2420_CONTROL_PADCONF_MMC_CMD_DIR_OFFSET 0x0cd -#define OMAP2420_CONTROL_PADCONF_MMC_CLKI_OFFSET 0x0ce -#define OMAP2420_CONTROL_PADCONF_SPI1_CLK_OFFSET 0x0cf -#define OMAP2420_CONTROL_PADCONF_SPI1_SIMO_OFFSET 0x0d0 -#define OMAP2420_CONTROL_PADCONF_SPI1_SOMI_OFFSET 0x0d1 -#define OMAP2420_CONTROL_PADCONF_SPI1_NCS0_OFFSET 0x0d2 -#define OMAP2420_CONTROL_PADCONF_SPI1_NCS1_OFFSET 0x0d3 -#define OMAP2420_CONTROL_PADCONF_SPI1_NCS2_OFFSET 0x0d4 -#define OMAP2420_CONTROL_PADCONF_SPI1_NCS3_OFFSET 0x0d5 -#define OMAP2420_CONTROL_PADCONF_SPI2_CLK_OFFSET 0x0d6 -#define OMAP2420_CONTROL_PADCONF_SPI2_SIMO_OFFSET 0x0d7 -#define OMAP2420_CONTROL_PADCONF_SPI2_SOMI_OFFSET 0x0d8 -#define OMAP2420_CONTROL_PADCONF_SPI2_NCS0_OFFSET 0x0d9 -#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x0da -#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x0db -#define OMAP2420_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x0dc -#define OMAP2420_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x0dd -#define OMAP2420_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x0de -#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x0df -#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x0e0 -#define OMAP2420_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x0e1 -#define OMAP2420_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x0e2 -#define OMAP2420_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x0e3 -#define OMAP2420_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x0e4 -#define OMAP2420_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x0e5 -#define OMAP2420_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x0e6 -#define OMAP2420_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x0e7 -#define OMAP2420_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x0e8 -#define OMAP2420_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x0e9 -#define OMAP2420_CONTROL_PADCONF_TV_CVBS_OFFSET 0x0ea -#define OMAP2420_CONTROL_PADCONF_TV_VREF_OFFSET 0x0eb -#define OMAP2420_CONTROL_PADCONF_TV_RREF_OFFSET 0x0ec -#define OMAP2420_CONTROL_PADCONF_USB0_PUEN_OFFSET 0x0ed -#define OMAP2420_CONTROL_PADCONF_USB0_VP_OFFSET 0x0ee -#define OMAP2420_CONTROL_PADCONF_USB0_VM_OFFSET 0x0ef -#define OMAP2420_CONTROL_PADCONF_USB0_RCV_OFFSET 0x0f0 -#define OMAP2420_CONTROL_PADCONF_USB0_TXEN_OFFSET 0x0f1 -#define OMAP2420_CONTROL_PADCONF_USB0_SE0_OFFSET 0x0f2 -#define OMAP2420_CONTROL_PADCONF_USB0_DAT_OFFSET 0x0f3 -#define OMAP2420_CONTROL_PADCONF_EAC_AC_SCLK_OFFSET 0x0f4 -#define OMAP2420_CONTROL_PADCONF_EAC_AC_FS_OFFSET 0x0f5 -#define OMAP2420_CONTROL_PADCONF_EAC_AC_DIN_OFFSET 0x0f6 -#define OMAP2420_CONTROL_PADCONF_EAC_AC_DOUT_OFFSET 0x0f7 -#define OMAP2420_CONTROL_PADCONF_EAC_AC_MCLK_OFFSET 0x0f8 -#define OMAP2420_CONTROL_PADCONF_EAC_AC_RST_OFFSET 0x0f9 -#define OMAP2420_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET 0x0fa -#define OMAP2420_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x0fb -#define OMAP2420_CONTROL_PADCONF_SYS_NIRQ_OFFSET 0x0fc -#define OMAP2420_CONTROL_PADCONF_SYS_NV_OFFSET 0x0fd -#define OMAP2420_CONTROL_PADCONF_GPIO_119_OFFSET 0x0fe -#define OMAP2420_CONTROL_PADCONF_GPIO_120_OFFSET 0x0ff -#define OMAP2420_CONTROL_PADCONF_GPIO_121_OFFSET 0x100 -#define OMAP2420_CONTROL_PADCONF_GPIO_122_OFFSET 0x101 -#define OMAP2420_CONTROL_PADCONF_SYS_32K_OFFSET 0x102 -#define OMAP2420_CONTROL_PADCONF_SYS_XTALIN_OFFSET 0x103 -#define OMAP2420_CONTROL_PADCONF_SYS_XTALOUT_OFFSET 0x104 -#define OMAP2420_CONTROL_PADCONF_GPIO_36_OFFSET 0x105 -#define OMAP2420_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x106 -#define OMAP2420_CONTROL_PADCONF_SYS_CLKOUT_OFFSET 0x107 -#define OMAP2420_CONTROL_PADCONF_GPIO_6_OFFSET 0x108 -#define OMAP2420_CONTROL_PADCONF_GPIO_124_OFFSET 0x109 -#define OMAP2420_CONTROL_PADCONF_GPIO_125_OFFSET 0x10a -#define OMAP2420_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x10b -#define OMAP2420_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x10c -#define OMAP2420_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x10d -#define OMAP2420_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x10e -#define OMAP2420_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0x10f -#define OMAP2420_CONTROL_PADCONF_JTAG_TMS_OFFSET 0x110 -#define OMAP2420_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x111 -#define OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET 0x112 - -#define OMAP2420_CONTROL_PADCONF_MUX_SIZE \ - (OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x1) diff --git a/arch/arm/mach-omap2/mux2430.c b/arch/arm/mach-omap2/mux2430.c deleted file mode 100644 index 4185f92553db..000000000000 --- a/arch/arm/mach-omap2/mux2430.c +++ /dev/null @@ -1,793 +0,0 @@ -/* - * Copyright (C) 2010 Nokia - * Copyright (C) 2010 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/init.h> - -#include "mux.h" - -#ifdef CONFIG_OMAP_MUX - -#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ -{ \ - .reg_offset = (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET), \ - .gpio = (g), \ - .muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \ -} - -#else - -#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ -{ \ - .reg_offset = (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET), \ - .gpio = (g), \ -} - -#endif - -#define _OMAP2430_BALLENTRY(M0, bb, bt) \ -{ \ - .reg_offset = (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET), \ - .balls = { bb, bt }, \ -} - -/* - * Superset of all mux modes for omap2430 - */ -static struct omap_mux __initdata omap2430_muxmodes[] = { - _OMAP2430_MUXENTRY(CAM_D0, 133, - "cam_d0", "hw_dbg0", "sti_dout", "gpio_133", - NULL, NULL, "etk_d2", "safe_mode"), - _OMAP2430_MUXENTRY(CAM_D10, 146, - "cam_d10", NULL, NULL, "gpio_146", - NULL, NULL, "etk_d12", "safe_mode"), - _OMAP2430_MUXENTRY(CAM_D11, 145, - "cam_d11", NULL, NULL, "gpio_145", - NULL, NULL, "etk_d13", "safe_mode"), - _OMAP2430_MUXENTRY(CAM_D1, 132, - "cam_d1", "hw_dbg1", "sti_din", "gpio_132", - NULL, NULL, "etk_d3", "safe_mode"), - _OMAP2430_MUXENTRY(CAM_D2, 129, - "cam_d2", "hw_dbg2", "mcbsp1_clkx", "gpio_129", - NULL, NULL, "etk_d4", "safe_mode"), - _OMAP2430_MUXENTRY(CAM_D3, 128, - "cam_d3", "hw_dbg3", "mcbsp1_dr", "gpio_128", - NULL, NULL, "etk_d5", "safe_mode"), - _OMAP2430_MUXENTRY(CAM_D4, 143, - "cam_d4", "hw_dbg4", "mcbsp1_fsr", "gpio_143", - NULL, NULL, "etk_d6", "safe_mode"), - _OMAP2430_MUXENTRY(CAM_D5, 112, - "cam_d5", "hw_dbg5", "mcbsp1_clkr", "gpio_112", - NULL, NULL, "etk_d7", "safe_mode"), - _OMAP2430_MUXENTRY(CAM_D6, 137, - "cam_d6", "hw_dbg6", NULL, "gpio_137", - NULL, NULL, "etk_d8", "safe_mode"), - _OMAP2430_MUXENTRY(CAM_D7, 136, - "cam_d7", "hw_dbg7", NULL, "gpio_136", - NULL, NULL, "etk_d9", "safe_mode"), - _OMAP2430_MUXENTRY(CAM_D8, 135, - "cam_d8", "hw_dbg8", NULL, "gpio_135", - NULL, NULL, "etk_d10", "safe_mode"), - _OMAP2430_MUXENTRY(CAM_D9, 134, - "cam_d9", "hw_dbg9", NULL, "gpio_134", - NULL, NULL, "etk_d11", "safe_mode"), - _OMAP2430_MUXENTRY(CAM_HS, 11, - "cam_hs", "hw_dbg10", "mcbsp1_dx", "gpio_11", - NULL, NULL, "etk_d1", "safe_mode"), - _OMAP2430_MUXENTRY(CAM_LCLK, 0, - "cam_lclk", NULL, "mcbsp_clks", NULL, - NULL, NULL, "etk_c1", "safe_mode"), - _OMAP2430_MUXENTRY(CAM_VS, 12, - "cam_vs", "hw_dbg11", "mcbsp1_fsx", "gpio_12", - NULL, NULL, "etk_d0", "safe_mode"), - _OMAP2430_MUXENTRY(CAM_XCLK, 0, - "cam_xclk", NULL, "sti_clk", NULL, - NULL, NULL, "etk_c2", NULL), - _OMAP2430_MUXENTRY(DSS_ACBIAS, 48, - "dss_acbias", NULL, "mcbsp2_fsx", "gpio_48", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA0, 40, - "dss_data0", "uart1_cts", NULL, "gpio_40", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA10, 128, - "dss_data10", "sdi_data1n", NULL, "gpio_128", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA11, 129, - "dss_data11", "sdi_data1p", NULL, "gpio_129", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA12, 130, - "dss_data12", "sdi_data2n", NULL, "gpio_130", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA13, 131, - "dss_data13", "sdi_data2p", NULL, "gpio_131", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA14, 132, - "dss_data14", "sdi_data3n", NULL, "gpio_132", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA15, 133, - "dss_data15", "sdi_data3p", NULL, "gpio_133", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA16, 46, - "dss_data16", NULL, NULL, "gpio_46", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA17, 47, - "dss_data17", NULL, NULL, "gpio_47", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA1, 41, - "dss_data1", "uart1_rts", NULL, "gpio_41", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA2, 42, - "dss_data2", "uart1_tx", NULL, "gpio_42", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA3, 43, - "dss_data3", "uart1_rx", NULL, "gpio_43", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA4, 44, - "dss_data4", "uart3_rx_irrx", NULL, "gpio_44", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA5, 45, - "dss_data5", "uart3_tx_irtx", NULL, "gpio_45", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA6, 144, - "dss_data6", NULL, NULL, "gpio_144", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA7, 147, - "dss_data7", NULL, NULL, "gpio_147", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA8, 38, - "dss_data8", NULL, NULL, "gpio_38", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_DATA9, 39, - "dss_data9", NULL, NULL, "gpio_39", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(DSS_HSYNC, 110, - "dss_hsync", NULL, NULL, "gpio_110", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_113, 113, - "gpio_113", "mcbsp2_clkx", NULL, "gpio_113", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_114, 114, - "gpio_114", "mcbsp2_fsx", NULL, "gpio_114", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_115, 115, - "gpio_115", "mcbsp2_dr", NULL, "gpio_115", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_116, 116, - "gpio_116", "mcbsp2_dx", NULL, "gpio_116", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_128, 128, - "gpio_128", NULL, "sti_din", "gpio_128", - NULL, "sys_boot0", NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_129, 129, - "gpio_129", NULL, "sti_dout", "gpio_129", - NULL, "sys_boot1", NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_130, 130, - "gpio_130", NULL, NULL, "gpio_130", - "jtag_emu2", "sys_boot2", NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_131, 131, - "gpio_131", NULL, NULL, "gpio_131", - "jtag_emu3", "sys_boot3", NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_132, 132, - "gpio_132", NULL, NULL, "gpio_132", - NULL, "sys_boot4", NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_133, 133, - "gpio_133", NULL, NULL, "gpio_133", - NULL, "sys_boot5", NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_134, 134, - "gpio_134", "ccp_datn", NULL, "gpio_134", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_135, 135, - "gpio_135", "ccp_datp", NULL, "gpio_135", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_136, 136, - "gpio_136", "ccp_clkn", NULL, "gpio_136", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_137, 137, - "gpio_137", "ccp_clkp", NULL, "gpio_137", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_138, 138, - "gpio_138", "spi3_clk", NULL, "gpio_138", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_139, 139, - "gpio_139", "spi3_cs0", "sys_ndmareq3", "gpio_139", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_140, 140, - "gpio_140", "spi3_simo", "sys_ndmareq4", "gpio_140", - NULL, NULL, "etk_d14", "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_141, 141, - "gpio_141", "spi3_somi", NULL, "gpio_141", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_142, 142, - "gpio_142", "spi3_cs1", "sys_ndmareq2", "gpio_142", - NULL, NULL, "etk_d15", "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_148, 148, - "gpio_148", "mcbsp5_fsx", NULL, "gpio_148", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_149, 149, - "gpio_149", "mcbsp5_dx", NULL, "gpio_149", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_150, 150, - "gpio_150", "mcbsp5_dr", NULL, "gpio_150", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_151, 151, - "gpio_151", "sys_pwrok", NULL, "gpio_151", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_152, 152, - "gpio_152", "uart1_cts", "sys_ndmareq1", "gpio_152", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_153, 153, - "gpio_153", "uart1_rx", "sys_ndmareq0", "gpio_153", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_154, 154, - "gpio_154", "mcbsp5_clkx", NULL, "gpio_154", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_63, 63, - "gpio_63", "mcbsp4_clkx", NULL, "gpio_63", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_78, 78, - "gpio_78", NULL, "uart2_rts", "gpio_78", - "uart3_rts_sd", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_79, 79, - "gpio_79", "secure_indicator", "uart2_tx", "gpio_79", - "uart3_tx_irtx", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_7, 7, - "gpio_7", NULL, "uart2_cts", "gpio_7", - "uart3_cts_rctx", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPIO_80, 80, - "gpio_80", NULL, "uart2_rx", "gpio_80", - "uart3_rx_irrx", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_A10, 3, - "gpmc_a10", NULL, "sys_ndmareq0", "gpio_3", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_A1, 31, - "gpmc_a1", NULL, NULL, "gpio_31", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_A2, 30, - "gpmc_a2", NULL, NULL, "gpio_30", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_A3, 29, - "gpmc_a3", NULL, NULL, "gpio_29", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_A4, 49, - "gpmc_a4", NULL, NULL, "gpio_49", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_A5, 53, - "gpmc_a5", NULL, NULL, "gpio_53", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_A6, 52, - "gpmc_a6", NULL, NULL, "gpio_52", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_A7, 6, - "gpmc_a7", NULL, NULL, "gpio_6", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_A8, 5, - "gpmc_a8", NULL, NULL, "gpio_5", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_A9, 4, - "gpmc_a9", NULL, "sys_ndmareq1", "gpio_4", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_CLK, 21, - "gpmc_clk", NULL, NULL, "gpio_21", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_D10, 18, - "gpmc_d10", NULL, NULL, "gpio_18", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_D11, 57, - "gpmc_d11", NULL, NULL, "gpio_57", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_D12, 77, - "gpmc_d12", NULL, NULL, "gpio_77", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_D13, 76, - "gpmc_d13", NULL, NULL, "gpio_76", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_D14, 55, - "gpmc_d14", NULL, NULL, "gpio_55", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_D15, 54, - "gpmc_d15", NULL, NULL, "gpio_54", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_D8, 20, - "gpmc_d8", NULL, NULL, "gpio_20", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_D9, 19, - "gpmc_d9", NULL, NULL, "gpio_19", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_NCS1, 22, - "gpmc_ncs1", NULL, NULL, "gpio_22", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_NCS2, 23, - "gpmc_ncs2", NULL, NULL, "gpio_23", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_NCS3, 24, - "gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_NCS4, 25, - "gpmc_ncs4", NULL, NULL, "gpio_25", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_NCS5, 26, - "gpmc_ncs5", NULL, NULL, "gpio_26", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_NCS6, 27, - "gpmc_ncs6", NULL, NULL, "gpio_27", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_NCS7, 28, - "gpmc_ncs7", "gpmc_io_dir", NULL, "gpio_28", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_WAIT1, 33, - "gpmc_wait1", NULL, NULL, "gpio_33", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_WAIT2, 34, - "gpmc_wait2", NULL, NULL, "gpio_34", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(GPMC_WAIT3, 35, - "gpmc_wait3", NULL, NULL, "gpio_35", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(HDQ_SIO, 101, - "hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101", - "uart3_rx_irrx", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(I2C1_SCL, 50, - "i2c1_scl", NULL, NULL, "gpio_50", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(I2C1_SDA, 51, - "i2c1_sda", NULL, NULL, "gpio_51", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(I2C2_SCL, 99, - "i2c2_scl", NULL, NULL, "gpio_99", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(I2C2_SDA, 100, - "i2c2_sda", NULL, NULL, "gpio_100", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(JTAG_EMU0, 127, - "jtag_emu0", "secure_indicator", NULL, "gpio_127", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(JTAG_EMU1, 126, - "jtag_emu1", NULL, NULL, "gpio_126", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(MCBSP1_CLKR, 92, - "mcbsp1_clkr", "ssi2_dat_tx", NULL, "gpio_92", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(MCBSP1_CLKX, 98, - "mcbsp1_clkx", "ssi2_wake", NULL, "gpio_98", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(MCBSP1_DR, 95, - "mcbsp1_dr", "ssi2_dat_rx", NULL, "gpio_95", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(MCBSP1_DX, 94, - "mcbsp1_dx", "ssi2_rdy_tx", NULL, "gpio_94", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(MCBSP1_FSR, 93, - "mcbsp1_fsr", "ssi2_flag_tx", NULL, "gpio_93", - "spi2_cs1", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(MCBSP1_FSX, 97, - "mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(MCBSP2_CLKX, 147, - "mcbsp2_clkx", "sdi_clkp", "dss_data23", "gpio_147", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(MCBSP2_DR, 144, - "mcbsp2_dr", "sdi_clkn", "dss_data22", "gpio_144", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(MCBSP3_CLKX, 71, - "mcbsp3_clkx", NULL, NULL, "gpio_71", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(MCBSP3_DR, 73, - "mcbsp3_dr", NULL, NULL, "gpio_73", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(MCBSP3_DX, 74, - "mcbsp3_dx", NULL, "sti_clk", "gpio_74", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(MCBSP3_FSX, 72, - "mcbsp3_fsx", NULL, NULL, "gpio_72", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(MCBSP_CLKS, 96, - "mcbsp_clks", "ssi2_flag_rx", NULL, "gpio_96", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SDMMC1_CLKO, 0, - "sdmmc1_clko", "ms_clko", NULL, NULL, - NULL, "hw_dbg9", "hw_dbg3", "safe_mode"), - _OMAP2430_MUXENTRY(SDMMC1_CMD, 0, - "sdmmc1_cmd", "ms_bs", NULL, NULL, - NULL, "hw_dbg8", "hw_dbg2", "safe_mode"), - _OMAP2430_MUXENTRY(SDMMC1_DAT0, 0, - "sdmmc1_dat0", "ms_dat0", NULL, NULL, - NULL, "hw_dbg7", "hw_dbg1", "safe_mode"), - _OMAP2430_MUXENTRY(SDMMC1_DAT1, 75, - "sdmmc1_dat1", "ms_dat1", NULL, "gpio_75", - NULL, "hw_dbg6", "hw_dbg0", "safe_mode"), - _OMAP2430_MUXENTRY(SDMMC1_DAT2, 0, - "sdmmc1_dat2", "ms_dat2", NULL, NULL, - NULL, "hw_dbg5", "hw_dbg10", "safe_mode"), - _OMAP2430_MUXENTRY(SDMMC1_DAT3, 0, - "sdmmc1_dat3", "ms_dat3", NULL, NULL, - NULL, "hw_dbg4", "hw_dbg11", "safe_mode"), - _OMAP2430_MUXENTRY(SDMMC2_CLKO, 13, - "sdmmc2_clko", NULL, NULL, "gpio_13", - NULL, "spi3_clk", NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SDMMC2_CMD, 15, - "sdmmc2_cmd", "usb2_rcv", NULL, "gpio_15", - NULL, "spi3_simo", NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SDMMC2_DAT0, 16, - "sdmmc2_dat0", "usb2_tllse0", NULL, "gpio_16", - NULL, "spi3_somi", NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SDMMC2_DAT1, 58, - "sdmmc2_dat1", "usb2_txen", NULL, "gpio_58", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SDMMC2_DAT2, 17, - "sdmmc2_dat2", "usb2_dat", NULL, "gpio_17", - NULL, "spi3_cs1", NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SDMMC2_DAT3, 14, - "sdmmc2_dat3", "usb2_se0", NULL, "gpio_14", - NULL, "spi3_cs0", NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SDRC_A12, 2, - "sdrc_a12", NULL, NULL, "gpio_2", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SDRC_A13, 1, - "sdrc_a13", NULL, NULL, "gpio_1", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SDRC_A14, 0, - "sdrc_a14", NULL, NULL, "gpio_0", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SDRC_CKE1, 36, - "sdrc_cke1", NULL, NULL, "gpio_36", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SDRC_NCS1, 37, - "sdrc_ncs1", NULL, NULL, "gpio_37", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SPI1_CLK, 81, - "spi1_clk", NULL, NULL, "gpio_81", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SPI1_CS0, 84, - "spi1_cs0", NULL, NULL, "gpio_84", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SPI1_CS1, 85, - "spi1_cs1", NULL, NULL, "gpio_85", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SPI1_CS2, 86, - "spi1_cs2", NULL, NULL, "gpio_86", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SPI1_CS3, 87, - "spi1_cs3", "spi2_cs1", NULL, "gpio_87", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SPI1_SIMO, 82, - "spi1_simo", NULL, NULL, "gpio_82", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SPI1_SOMI, 83, - "spi1_somi", NULL, NULL, "gpio_83", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SPI2_CLK, 88, - "spi2_clk", "gpt9_pwm_evt", NULL, "gpio_88", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SPI2_CS0, 91, - "spi2_cs0", "gpt12_pwm_evt", NULL, "gpio_91", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SPI2_SIMO, 89, - "spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SPI2_SOMI, 90, - "spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SSI1_DAT_RX, 62, - "ssi1_dat_rx", "uart1_rx", "usb1_dat", "gpio_62", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SSI1_DAT_TX, 59, - "ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SSI1_FLAG_RX, 64, - "ssi1_flag_rx", "mcbsp4_dr", NULL, "gpio_64", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SSI1_FLAG_TX, 60, - "ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_60", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SSI1_RDY_RX, 65, - "ssi1_rdy_rx", "mcbsp4_dx", NULL, "gpio_65", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SSI1_RDY_TX, 61, - "ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SSI1_WAKE, 66, - "ssi1_wake", "mcbsp4_fsx", NULL, "gpio_66", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SYS_CLKOUT, 111, - "sys_clkout", NULL, NULL, "gpio_111", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SYS_DRM_MSECURE, 118, - "sys_drm_msecure", NULL, "sys_ndmareq6", "gpio_118", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SYS_NIRQ0, 56, - "sys_nirq0", NULL, NULL, "gpio_56", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(SYS_NIRQ1, 125, - "sys_nirq1", NULL, "sys_ndmareq5", "gpio_125", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(UART1_CTS, 32, - "uart1_cts", "sdi_vsync", "dss_data18", "gpio_32", - "mcbsp5_clkx", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(UART1_RTS, 8, - "uart1_rts", "sdi_hsync", "dss_data19", "gpio_8", - "mcbsp5_fsx", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(UART1_RX, 10, - "uart1_rx", "sdi_stp", "dss_data21", "gpio_10", - "mcbsp5_dr", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(UART1_TX, 9, - "uart1_tx", "sdi_den", "dss_data20", "gpio_9", - "mcbsp5_dx", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(UART2_CTS, 67, - "uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(UART2_RTS, 68, - "uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(UART2_RX, 70, - "uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(UART2_TX, 69, - "uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(UART3_CTS_RCTX, 102, - "uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(UART3_RTS_SD, 103, - "uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(UART3_RX_IRRX, 105, - "uart3_rx_irrx", NULL, NULL, "gpio_105", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(UART3_TX_IRTX, 104, - "uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(USB0HS_CLK, 120, - "usb0hs_clk", NULL, NULL, "gpio_120", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(USB0HS_DATA0, 0, - "usb0hs_data0", "uart3_tx_irtx", NULL, NULL, - "usb0_txen", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(USB0HS_DATA1, 0, - "usb0hs_data1", "uart3_rx_irrx", NULL, NULL, - "usb0_dat", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(USB0HS_DATA2, 0, - "usb0hs_data2", "uart3_rts_sd", NULL, NULL, - "usb0_se0", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(USB0HS_DATA3, 106, - "usb0hs_data3", NULL, "uart3_cts_rctx", "gpio_106", - "usb0_puen", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(USB0HS_DATA4, 107, - "usb0hs_data4", "mcbsp2_dr", NULL, "gpio_107", - "usb0_vp", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(USB0HS_DATA5, 108, - "usb0hs_data5", "mcbsp2_dx", NULL, "gpio_108", - "usb0_vm", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(USB0HS_DATA6, 109, - "usb0hs_data6", "mcbsp2_fsx", NULL, "gpio_109", - "usb0_rcv", NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(USB0HS_DATA7, 124, - "usb0hs_data7", "mcbsp2_clkx", NULL, "gpio_124", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(USB0HS_DIR, 121, - "usb0hs_dir", NULL, NULL, "gpio_121", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(USB0HS_NXT, 123, - "usb0hs_nxt", NULL, NULL, "gpio_123", - NULL, NULL, NULL, "safe_mode"), - _OMAP2430_MUXENTRY(USB0HS_STP, 122, - "usb0hs_stp", NULL, NULL, "gpio_122", - NULL, NULL, NULL, "safe_mode"), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -/* - * Balls for POP package - * 447-pin s-PBGA Package, 0.00mm Ball Pitch (Bottom) - */ -#ifdef CONFIG_DEBUG_FS -static struct omap_ball __initdata omap2430_pop_ball[] = { - _OMAP2430_BALLENTRY(CAM_D0, "t8", NULL), - _OMAP2430_BALLENTRY(CAM_D1, "t4", NULL), - _OMAP2430_BALLENTRY(CAM_D10, "r4", NULL), - _OMAP2430_BALLENTRY(CAM_D11, "w3", NULL), - _OMAP2430_BALLENTRY(CAM_D2, "r2", NULL), - _OMAP2430_BALLENTRY(CAM_D3, "u3", NULL), - _OMAP2430_BALLENTRY(CAM_D4, "u2", NULL), - _OMAP2430_BALLENTRY(CAM_D5, "v1", NULL), - _OMAP2430_BALLENTRY(CAM_D6, "t3", NULL), - _OMAP2430_BALLENTRY(CAM_D7, "r3", NULL), - _OMAP2430_BALLENTRY(CAM_D8, "u7", NULL), - _OMAP2430_BALLENTRY(CAM_D9, "t7", NULL), - _OMAP2430_BALLENTRY(CAM_HS, "p2", NULL), - _OMAP2430_BALLENTRY(CAM_LCLK, "r7", NULL), - _OMAP2430_BALLENTRY(CAM_VS, "n2", NULL), - _OMAP2430_BALLENTRY(CAM_XCLK, "p3", NULL), - _OMAP2430_BALLENTRY(DSS_ACBIAS, "y3", NULL), - _OMAP2430_BALLENTRY(DSS_DATA0, "v8", NULL), - _OMAP2430_BALLENTRY(DSS_DATA1, "w1", NULL), - _OMAP2430_BALLENTRY(DSS_DATA10, "k25", NULL), - _OMAP2430_BALLENTRY(DSS_DATA11, "j25", NULL), - _OMAP2430_BALLENTRY(DSS_DATA12, "k24", NULL), - _OMAP2430_BALLENTRY(DSS_DATA13, "j24", NULL), - _OMAP2430_BALLENTRY(DSS_DATA14, "h25", NULL), - _OMAP2430_BALLENTRY(DSS_DATA15, "g25", NULL), - _OMAP2430_BALLENTRY(DSS_DATA16, "ac3", NULL), - _OMAP2430_BALLENTRY(DSS_DATA17, "y7", NULL), - _OMAP2430_BALLENTRY(DSS_DATA2, "u8", NULL), - _OMAP2430_BALLENTRY(DSS_DATA3, "u4", NULL), - _OMAP2430_BALLENTRY(DSS_DATA4, "v3", NULL), - _OMAP2430_BALLENTRY(DSS_DATA5, "aa4", NULL), - _OMAP2430_BALLENTRY(DSS_DATA6, "w8", NULL), - _OMAP2430_BALLENTRY(DSS_DATA7, "y1", NULL), - _OMAP2430_BALLENTRY(DSS_DATA8, "aa2", NULL), - _OMAP2430_BALLENTRY(DSS_DATA9, "ab4", NULL), - _OMAP2430_BALLENTRY(DSS_HSYNC, "v2", NULL), - _OMAP2430_BALLENTRY(GPIO_113, "ad16", NULL), - _OMAP2430_BALLENTRY(GPIO_114, "ac10", NULL), - _OMAP2430_BALLENTRY(GPIO_115, "ad13", NULL), - _OMAP2430_BALLENTRY(GPIO_116, "ae15", NULL), - _OMAP2430_BALLENTRY(GPIO_128, "p1", NULL), - _OMAP2430_BALLENTRY(GPIO_129, "r1", NULL), - _OMAP2430_BALLENTRY(GPIO_130, "p7", NULL), - _OMAP2430_BALLENTRY(GPIO_131, "l8", NULL), - _OMAP2430_BALLENTRY(GPIO_132, "w24", NULL), - _OMAP2430_BALLENTRY(GPIO_133, "aa24", NULL), - _OMAP2430_BALLENTRY(GPIO_134, "ae12", NULL), - _OMAP2430_BALLENTRY(GPIO_135, "ae11", NULL), - _OMAP2430_BALLENTRY(GPIO_136, "ad12", NULL), - _OMAP2430_BALLENTRY(GPIO_137, "ad11", NULL), - _OMAP2430_BALLENTRY(GPIO_138, "y12", NULL), - _OMAP2430_BALLENTRY(GPIO_139, "ad17", NULL), - _OMAP2430_BALLENTRY(GPIO_140, "l7", NULL), - _OMAP2430_BALLENTRY(GPIO_141, "ac24", NULL), - _OMAP2430_BALLENTRY(GPIO_142, "m3", NULL), - _OMAP2430_BALLENTRY(GPIO_148, "af12", NULL), - _OMAP2430_BALLENTRY(GPIO_149, "k7", NULL), - _OMAP2430_BALLENTRY(GPIO_150, "m1", NULL), - _OMAP2430_BALLENTRY(GPIO_151, "ad14", NULL), - _OMAP2430_BALLENTRY(GPIO_152, "ad18", NULL), - _OMAP2430_BALLENTRY(GPIO_153, "u24", NULL), - _OMAP2430_BALLENTRY(GPIO_154, "ae16", NULL), - _OMAP2430_BALLENTRY(GPIO_63, "n3", NULL), - _OMAP2430_BALLENTRY(GPIO_7, "ac23", NULL), - _OMAP2430_BALLENTRY(GPIO_78, "ad10", NULL), - _OMAP2430_BALLENTRY(GPIO_79, "ae10", NULL), - _OMAP2430_BALLENTRY(GPIO_80, "ae13", NULL), - _OMAP2430_BALLENTRY(GPMC_A1, "a9", NULL), - _OMAP2430_BALLENTRY(GPMC_A10, "g12", NULL), - _OMAP2430_BALLENTRY(GPMC_A2, "b8", NULL), - _OMAP2430_BALLENTRY(GPMC_A3, "g10", NULL), - _OMAP2430_BALLENTRY(GPMC_A4, "g11", NULL), - _OMAP2430_BALLENTRY(GPMC_A5, "a10", NULL), - _OMAP2430_BALLENTRY(GPMC_A6, "g13", NULL), - _OMAP2430_BALLENTRY(GPMC_A7, "a6", NULL), - _OMAP2430_BALLENTRY(GPMC_A8, "h1", NULL), - _OMAP2430_BALLENTRY(GPMC_A9, "c8", NULL), - _OMAP2430_BALLENTRY(GPMC_CLK, "n1", "l1"), - _OMAP2430_BALLENTRY(GPMC_D10, "d1", "n1"), - _OMAP2430_BALLENTRY(GPMC_D11, "d2", "p2"), - _OMAP2430_BALLENTRY(GPMC_D12, "e1", "p1"), - _OMAP2430_BALLENTRY(GPMC_D13, "e3", "m1"), - _OMAP2430_BALLENTRY(GPMC_D14, "c7", "j2"), - _OMAP2430_BALLENTRY(GPMC_D15, "f3", "k2"), - _OMAP2430_BALLENTRY(GPMC_D8, "e2", "r1"), - _OMAP2430_BALLENTRY(GPMC_D9, "ab1", "t1"), - _OMAP2430_BALLENTRY(GPMC_NCS1, "ac1", "w1"), - _OMAP2430_BALLENTRY(GPMC_NCS2, "c6", NULL), - _OMAP2430_BALLENTRY(GPMC_NCS3, "b9", NULL), - _OMAP2430_BALLENTRY(GPMC_NCS4, "b4", NULL), - _OMAP2430_BALLENTRY(GPMC_NCS5, "a4", NULL), - _OMAP2430_BALLENTRY(GPMC_NCS6, "f1", NULL), - _OMAP2430_BALLENTRY(GPMC_NCS7, "a7", NULL), - _OMAP2430_BALLENTRY(GPMC_WAIT1, "j1", "y8"), - _OMAP2430_BALLENTRY(GPMC_WAIT2, "b7", NULL), - _OMAP2430_BALLENTRY(GPMC_WAIT3, "g14", NULL), - _OMAP2430_BALLENTRY(HDQ_SIO, "h20", NULL), - _OMAP2430_BALLENTRY(I2C1_SCL, "y17", NULL), - _OMAP2430_BALLENTRY(I2C1_SDA, "ac19", NULL), - _OMAP2430_BALLENTRY(I2C2_SCL, "n7", NULL), - _OMAP2430_BALLENTRY(I2C2_SDA, "m4", NULL), - _OMAP2430_BALLENTRY(JTAG_EMU0, "e25", NULL), - _OMAP2430_BALLENTRY(JTAG_EMU1, "e24", NULL), - _OMAP2430_BALLENTRY(MCBSP1_CLKR, "ab2", NULL), - _OMAP2430_BALLENTRY(MCBSP1_CLKX, "y9", NULL), - _OMAP2430_BALLENTRY(MCBSP1_DR, "af3", NULL), - _OMAP2430_BALLENTRY(MCBSP1_DX, "aa1", NULL), - _OMAP2430_BALLENTRY(MCBSP1_FSR, "ad5", NULL), - _OMAP2430_BALLENTRY(MCBSP1_FSX, "ab3", NULL), - _OMAP2430_BALLENTRY(MCBSP2_CLKX, "j26", NULL), - _OMAP2430_BALLENTRY(MCBSP2_DR, "k26", NULL), - _OMAP2430_BALLENTRY(MCBSP3_CLKX, "ac9", NULL), - _OMAP2430_BALLENTRY(MCBSP3_DR, "ae2", NULL), - _OMAP2430_BALLENTRY(MCBSP3_DX, "af4", NULL), - _OMAP2430_BALLENTRY(MCBSP3_FSX, "ae4", NULL), - _OMAP2430_BALLENTRY(MCBSP_CLKS, "ad6", NULL), - _OMAP2430_BALLENTRY(SDMMC1_CLKO, "n23", NULL), - _OMAP2430_BALLENTRY(SDMMC1_CMD, "l23", NULL), - _OMAP2430_BALLENTRY(SDMMC1_DAT0, "m24", NULL), - _OMAP2430_BALLENTRY(SDMMC1_DAT1, "p23", NULL), - _OMAP2430_BALLENTRY(SDMMC1_DAT2, "t20", NULL), - _OMAP2430_BALLENTRY(SDMMC1_DAT3, "r20", NULL), - _OMAP2430_BALLENTRY(SDMMC2_CLKO, "v26", NULL), - _OMAP2430_BALLENTRY(SDMMC2_CMD, "w20", NULL), - _OMAP2430_BALLENTRY(SDMMC2_DAT0, "v23", NULL), - _OMAP2430_BALLENTRY(SDMMC2_DAT1, "y24", NULL), - _OMAP2430_BALLENTRY(SDMMC2_DAT2, "v25", NULL), - _OMAP2430_BALLENTRY(SDMMC2_DAT3, "v24", NULL), - _OMAP2430_BALLENTRY(SDRC_A12, "w26", "r21"), - _OMAP2430_BALLENTRY(SDRC_A13, "af20", "aa15"), - _OMAP2430_BALLENTRY(SDRC_A14, "af16", "y12"), - _OMAP2430_BALLENTRY(SDRC_CKE1, "af15", "y13"), - _OMAP2430_BALLENTRY(SDRC_NCS1, "aa25", "t20"), - _OMAP2430_BALLENTRY(SPI1_CLK, "y18", NULL), - _OMAP2430_BALLENTRY(SPI1_CS0, "u1", NULL), - _OMAP2430_BALLENTRY(SPI1_CS1, "af19", NULL), - _OMAP2430_BALLENTRY(SPI1_CS2, "ae19", NULL), - _OMAP2430_BALLENTRY(SPI1_CS3, "h24", NULL), - _OMAP2430_BALLENTRY(SPI1_SIMO, "ad15", NULL), - _OMAP2430_BALLENTRY(SPI1_SOMI, "ae17", NULL), - _OMAP2430_BALLENTRY(SPI2_CLK, "y20", NULL), - _OMAP2430_BALLENTRY(SPI2_CS0, "y19", NULL), - _OMAP2430_BALLENTRY(SPI2_SIMO, "ac20", NULL), - _OMAP2430_BALLENTRY(SPI2_SOMI, "ad19", NULL), - _OMAP2430_BALLENTRY(SSI1_DAT_RX, "aa26", NULL), - _OMAP2430_BALLENTRY(SSI1_DAT_TX, "ad24", NULL), - _OMAP2430_BALLENTRY(SSI1_FLAG_RX, "ad23", NULL), - _OMAP2430_BALLENTRY(SSI1_FLAG_TX, "ab24", NULL), - _OMAP2430_BALLENTRY(SSI1_RDY_RX, "ab25", NULL), - _OMAP2430_BALLENTRY(SSI1_RDY_TX, "y25", NULL), - _OMAP2430_BALLENTRY(SSI1_WAKE, "ac25", NULL), - _OMAP2430_BALLENTRY(SYS_CLKOUT, "r25", NULL), - _OMAP2430_BALLENTRY(SYS_DRM_MSECURE, "ae3", NULL), - _OMAP2430_BALLENTRY(SYS_NIRQ0, "w25", NULL), - _OMAP2430_BALLENTRY(SYS_NIRQ1, "ad21", NULL), - _OMAP2430_BALLENTRY(UART1_CTS, "p24", NULL), - _OMAP2430_BALLENTRY(UART1_RTS, "p25", NULL), - _OMAP2430_BALLENTRY(UART1_RX, "n24", NULL), - _OMAP2430_BALLENTRY(UART1_TX, "r24", NULL), - _OMAP2430_BALLENTRY(UART2_CTS, "u25", NULL), - _OMAP2430_BALLENTRY(UART2_RTS, "t23", NULL), - _OMAP2430_BALLENTRY(UART2_RX, "t24", NULL), - _OMAP2430_BALLENTRY(UART2_TX, "u20", NULL), - _OMAP2430_BALLENTRY(UART3_CTS_RCTX, "m2", NULL), - _OMAP2430_BALLENTRY(UART3_RTS_SD, "k2", NULL), - _OMAP2430_BALLENTRY(UART3_RX_IRRX, "l3", NULL), - _OMAP2430_BALLENTRY(UART3_TX_IRTX, "l2", NULL), - _OMAP2430_BALLENTRY(USB0HS_CLK, "ae8", NULL), - _OMAP2430_BALLENTRY(USB0HS_DATA0, "ad4", NULL), - _OMAP2430_BALLENTRY(USB0HS_DATA1, "ae6", NULL), - _OMAP2430_BALLENTRY(USB0HS_DATA2, "af9", NULL), - _OMAP2430_BALLENTRY(USB0HS_DATA3, "ad9", NULL), - _OMAP2430_BALLENTRY(USB0HS_DATA4, "y11", NULL), - _OMAP2430_BALLENTRY(USB0HS_DATA5, "ad7", NULL), - _OMAP2430_BALLENTRY(USB0HS_DATA6, "ae7", NULL), - _OMAP2430_BALLENTRY(USB0HS_DATA7, "ac7", NULL), - _OMAP2430_BALLENTRY(USB0HS_DIR, "ad8", NULL), - _OMAP2430_BALLENTRY(USB0HS_NXT, "ae9", NULL), - _OMAP2430_BALLENTRY(USB0HS_STP, "ae5", NULL), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#else -#define omap2430_pop_ball NULL -#endif - -int __init omap2430_mux_init(struct omap_board_mux *board_subset, int flags) -{ - struct omap_ball *package_balls = NULL; - - switch (flags & OMAP_PACKAGE_MASK) { - case OMAP_PACKAGE_ZAC: - package_balls = omap2430_pop_ball; - break; - default: - pr_warning("%s: No ball data available for omap2420 package\n", - __func__); - } - - return omap_mux_init("core", OMAP_MUX_REG_8BIT | OMAP_MUX_GPIO_IN_MODE3, - OMAP2430_CONTROL_PADCONF_MUX_PBASE, - OMAP2430_CONTROL_PADCONF_MUX_SIZE, - omap2430_muxmodes, NULL, board_subset, - package_balls); -} diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h deleted file mode 100644 index 9fd93149ebd9..000000000000 --- a/arch/arm/mach-omap2/mux2430.h +++ /dev/null @@ -1,370 +0,0 @@ -/* - * Copyright (C) 2009 Nokia - * Copyright (C) 2009 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define OMAP2430_CONTROL_PADCONF_MUX_PBASE 0x49002030LU - -#define OMAP2430_MUX(mode0, mux_value) \ -{ \ - .reg_offset = (OMAP2430_CONTROL_PADCONF_##mode0##_OFFSET), \ - .value = (mux_value), \ -} - -/* - * OMAP2430 CONTROL_PADCONF* register offsets for pin-muxing - * - * Extracted from the TRM. Add 0x49002030 to these values to get the - * absolute addresses. The name in the macro is the mode-0 name of - * the pin. NOTE: These registers are 8-bits wide. - * - * Note that these defines use SDMMC instead of MMC for compatibility - * with signal names used in 3630. - */ -#define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x000 -#define OMAP2430_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x001 -#define OMAP2430_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x002 -#define OMAP2430_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x003 -#define OMAP2430_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x004 -#define OMAP2430_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x005 -#define OMAP2430_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x006 -#define OMAP2430_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x007 -#define OMAP2430_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x008 -#define OMAP2430_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET 0x009 -#define OMAP2430_CONTROL_PADCONF_GPMC_NOE_NRE_OFFSET 0x00a -#define OMAP2430_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x00b -#define OMAP2430_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET 0x00c -#define OMAP2430_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x00d -#define OMAP2430_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x00e -#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x00f -#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x010 -#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x011 -#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x012 -#define OMAP2430_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x013 -#define OMAP2430_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x014 -#define OMAP2430_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x015 -#define OMAP2430_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x016 -#define OMAP2430_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x017 -#define OMAP2430_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x018 -#define OMAP2430_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x019 -#define OMAP2430_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x01a -#define OMAP2430_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x01b -#define OMAP2430_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x01c -#define OMAP2430_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x01d -#define OMAP2430_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x01e -#define OMAP2430_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x01f -#define OMAP2430_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x020 -#define OMAP2430_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x021 -#define OMAP2430_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x022 -#define OMAP2430_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x023 -#define OMAP2430_CONTROL_PADCONF_SDRC_A14_OFFSET 0x024 -#define OMAP2430_CONTROL_PADCONF_SDRC_A13_OFFSET 0x025 -#define OMAP2430_CONTROL_PADCONF_SDRC_A12_OFFSET 0x026 -#define OMAP2430_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x027 -#define OMAP2430_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x028 -#define OMAP2430_CONTROL_PADCONF_SDRC_A11_OFFSET 0x029 -#define OMAP2430_CONTROL_PADCONF_SDRC_A10_OFFSET 0x02a -#define OMAP2430_CONTROL_PADCONF_SDRC_A9_OFFSET 0x02b -#define OMAP2430_CONTROL_PADCONF_SDRC_A8_OFFSET 0x02c -#define OMAP2430_CONTROL_PADCONF_SDRC_A7_OFFSET 0x02d -#define OMAP2430_CONTROL_PADCONF_SDRC_A6_OFFSET 0x02e -#define OMAP2430_CONTROL_PADCONF_SDRC_A5_OFFSET 0x02f -#define OMAP2430_CONTROL_PADCONF_SDRC_A4_OFFSET 0x030 -#define OMAP2430_CONTROL_PADCONF_SDRC_A3_OFFSET 0x031 -#define OMAP2430_CONTROL_PADCONF_SDRC_A2_OFFSET 0x032 -#define OMAP2430_CONTROL_PADCONF_SDRC_A1_OFFSET 0x033 -#define OMAP2430_CONTROL_PADCONF_SDRC_A0_OFFSET 0x034 -#define OMAP2430_CONTROL_PADCONF_SDRC_D31_OFFSET 0x035 -#define OMAP2430_CONTROL_PADCONF_SDRC_D30_OFFSET 0x036 -#define OMAP2430_CONTROL_PADCONF_SDRC_D29_OFFSET 0x037 -#define OMAP2430_CONTROL_PADCONF_SDRC_D28_OFFSET 0x038 -#define OMAP2430_CONTROL_PADCONF_SDRC_D27_OFFSET 0x039 -#define OMAP2430_CONTROL_PADCONF_SDRC_D26_OFFSET 0x03a -#define OMAP2430_CONTROL_PADCONF_SDRC_D25_OFFSET 0x03b -#define OMAP2430_CONTROL_PADCONF_SDRC_D24_OFFSET 0x03c -#define OMAP2430_CONTROL_PADCONF_SDRC_D23_OFFSET 0x03d -#define OMAP2430_CONTROL_PADCONF_SDRC_D22_OFFSET 0x03e -#define OMAP2430_CONTROL_PADCONF_SDRC_D21_OFFSET 0x03f -#define OMAP2430_CONTROL_PADCONF_SDRC_D20_OFFSET 0x040 -#define OMAP2430_CONTROL_PADCONF_SDRC_D19_OFFSET 0x041 -#define OMAP2430_CONTROL_PADCONF_SDRC_D18_OFFSET 0x042 -#define OMAP2430_CONTROL_PADCONF_SDRC_D17_OFFSET 0x043 -#define OMAP2430_CONTROL_PADCONF_SDRC_D16_OFFSET 0x044 -#define OMAP2430_CONTROL_PADCONF_SDRC_D15_OFFSET 0x045 -#define OMAP2430_CONTROL_PADCONF_SDRC_D14_OFFSET 0x046 -#define OMAP2430_CONTROL_PADCONF_SDRC_D13_OFFSET 0x047 -#define OMAP2430_CONTROL_PADCONF_SDRC_D12_OFFSET 0x048 -#define OMAP2430_CONTROL_PADCONF_SDRC_D11_OFFSET 0x049 -#define OMAP2430_CONTROL_PADCONF_SDRC_D10_OFFSET 0x04a -#define OMAP2430_CONTROL_PADCONF_SDRC_D9_OFFSET 0x04b -#define OMAP2430_CONTROL_PADCONF_SDRC_D8_OFFSET 0x04c -#define OMAP2430_CONTROL_PADCONF_SDRC_D7_OFFSET 0x04d -#define OMAP2430_CONTROL_PADCONF_SDRC_D6_OFFSET 0x04e -#define OMAP2430_CONTROL_PADCONF_SDRC_D5_OFFSET 0x04f -#define OMAP2430_CONTROL_PADCONF_SDRC_D4_OFFSET 0x050 -#define OMAP2430_CONTROL_PADCONF_SDRC_D3_OFFSET 0x051 -#define OMAP2430_CONTROL_PADCONF_SDRC_D2_OFFSET 0x052 -#define OMAP2430_CONTROL_PADCONF_SDRC_D1_OFFSET 0x053 -#define OMAP2430_CONTROL_PADCONF_SDRC_D0_OFFSET 0x054 -#define OMAP2430_CONTROL_PADCONF_GPMC_A10_OFFSET 0x055 -#define OMAP2430_CONTROL_PADCONF_GPMC_A9_OFFSET 0x056 -#define OMAP2430_CONTROL_PADCONF_GPMC_A8_OFFSET 0x057 -#define OMAP2430_CONTROL_PADCONF_GPMC_A7_OFFSET 0x058 -#define OMAP2430_CONTROL_PADCONF_GPMC_A6_OFFSET 0x059 -#define OMAP2430_CONTROL_PADCONF_GPMC_A5_OFFSET 0x05a -#define OMAP2430_CONTROL_PADCONF_GPMC_A4_OFFSET 0x05b -#define OMAP2430_CONTROL_PADCONF_GPMC_A3_OFFSET 0x05c -#define OMAP2430_CONTROL_PADCONF_GPMC_A2_OFFSET 0x05d -#define OMAP2430_CONTROL_PADCONF_GPMC_A1_OFFSET 0x05e -#define OMAP2430_CONTROL_PADCONF_GPMC_D15_OFFSET 0x05f -#define OMAP2430_CONTROL_PADCONF_GPMC_D14_OFFSET 0x060 -#define OMAP2430_CONTROL_PADCONF_GPMC_D13_OFFSET 0x061 -#define OMAP2430_CONTROL_PADCONF_GPMC_D12_OFFSET 0x062 -#define OMAP2430_CONTROL_PADCONF_GPMC_D11_OFFSET 0x063 -#define OMAP2430_CONTROL_PADCONF_GPMC_D10_OFFSET 0x064 -#define OMAP2430_CONTROL_PADCONF_GPMC_D9_OFFSET 0x065 -#define OMAP2430_CONTROL_PADCONF_GPMC_D8_OFFSET 0x066 -#define OMAP2430_CONTROL_PADCONF_GPMC_D7_OFFSET 0x067 -#define OMAP2430_CONTROL_PADCONF_GPMC_D6_OFFSET 0x068 -#define OMAP2430_CONTROL_PADCONF_GPMC_D5_OFFSET 0x069 -#define OMAP2430_CONTROL_PADCONF_GPMC_D4_OFFSET 0x06a -#define OMAP2430_CONTROL_PADCONF_GPMC_D3_OFFSET 0x06b -#define OMAP2430_CONTROL_PADCONF_GPMC_D2_OFFSET 0x06c -#define OMAP2430_CONTROL_PADCONF_GPMC_D1_OFFSET 0x06d -#define OMAP2430_CONTROL_PADCONF_GPMC_D0_OFFSET 0x06e -#define OMAP2430_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x06f -#define OMAP2430_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x070 -#define OMAP2430_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x071 -#define OMAP2430_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x072 -#define OMAP2430_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x073 -#define OMAP2430_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x074 -#define OMAP2430_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x075 -#define OMAP2430_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x076 -#define OMAP2430_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x077 -#define OMAP2430_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x078 -#define OMAP2430_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x079 -#define OMAP2430_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x07a -#define OMAP2430_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x07b -#define OMAP2430_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x07c -#define OMAP2430_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x07d -#define OMAP2430_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x07e -#define OMAP2430_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x07f -#define OMAP2430_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x080 -#define OMAP2430_CONTROL_PADCONF_UART1_CTS_OFFSET 0x081 -#define OMAP2430_CONTROL_PADCONF_UART1_RTS_OFFSET 0x082 -#define OMAP2430_CONTROL_PADCONF_UART1_TX_OFFSET 0x083 -#define OMAP2430_CONTROL_PADCONF_UART1_RX_OFFSET 0x084 -#define OMAP2430_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x085 -#define OMAP2430_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x086 -#define OMAP2430_CONTROL_PADCONF_DSS_PCLK_OFFSET 0x087 -#define OMAP2430_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x088 -#define OMAP2430_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x089 -#define OMAP2430_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x08a -#define OMAP2430_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET 0x08b -#define OMAP2430_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x08c -#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ0_OFFSET 0x08d -#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ1_OFFSET 0x08e -#define OMAP2430_CONTROL_PADCONF_SYS_VMODE_OFFSET 0x08f -#define OMAP2430_CONTROL_PADCONF_GPIO_128_OFFSET 0x090 -#define OMAP2430_CONTROL_PADCONF_GPIO_129_OFFSET 0x091 -#define OMAP2430_CONTROL_PADCONF_GPIO_130_OFFSET 0x092 -#define OMAP2430_CONTROL_PADCONF_GPIO_131_OFFSET 0x093 -#define OMAP2430_CONTROL_PADCONF_SYS_32K_OFFSET 0x094 -#define OMAP2430_CONTROL_PADCONF_SYS_XTALIN_OFFSET 0x095 -#define OMAP2430_CONTROL_PADCONF_SYS_XTALOUT_OFFSET 0x096 -#define OMAP2430_CONTROL_PADCONF_GPIO_132_OFFSET 0x097 -#define OMAP2430_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x098 -#define OMAP2430_CONTROL_PADCONF_SYS_CLKOUT_OFFSET 0x099 -#define OMAP2430_CONTROL_PADCONF_GPIO_151_OFFSET 0x09a -#define OMAP2430_CONTROL_PADCONF_GPIO_133_OFFSET 0x09b -#define OMAP2430_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x09c -#define OMAP2430_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x09d -#define OMAP2430_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x09e -#define OMAP2430_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x09f -#define OMAP2430_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0x0a0 -#define OMAP2430_CONTROL_PADCONF_JTAG_TMS_OFFSET 0x0a1 -#define OMAP2430_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x0a2 -#define OMAP2430_CONTROL_PADCONF_JTAG_TDO_OFFSET 0x0a3 -#define OMAP2430_CONTROL_PADCONF_CAM_D9_OFFSET 0x0a4 -#define OMAP2430_CONTROL_PADCONF_CAM_D8_OFFSET 0x0a5 -#define OMAP2430_CONTROL_PADCONF_CAM_D7_OFFSET 0x0a6 -#define OMAP2430_CONTROL_PADCONF_CAM_D6_OFFSET 0x0a7 -#define OMAP2430_CONTROL_PADCONF_CAM_D5_OFFSET 0x0a8 -#define OMAP2430_CONTROL_PADCONF_CAM_D4_OFFSET 0x0a9 -#define OMAP2430_CONTROL_PADCONF_CAM_D3_OFFSET 0x0aa -#define OMAP2430_CONTROL_PADCONF_CAM_D2_OFFSET 0x0ab -#define OMAP2430_CONTROL_PADCONF_CAM_D1_OFFSET 0x0ac -#define OMAP2430_CONTROL_PADCONF_CAM_D0_OFFSET 0x0ad -#define OMAP2430_CONTROL_PADCONF_CAM_HS_OFFSET 0x0ae -#define OMAP2430_CONTROL_PADCONF_CAM_VS_OFFSET 0x0af -#define OMAP2430_CONTROL_PADCONF_CAM_LCLK_OFFSET 0x0b0 -#define OMAP2430_CONTROL_PADCONF_CAM_XCLK_OFFSET 0x0b1 -#define OMAP2430_CONTROL_PADCONF_CAM_D11_OFFSET 0x0b2 -#define OMAP2430_CONTROL_PADCONF_CAM_D10_OFFSET 0x0b3 -#define OMAP2430_CONTROL_PADCONF_GPIO_134_OFFSET 0x0b4 -#define OMAP2430_CONTROL_PADCONF_GPIO_135_OFFSET 0x0b5 -#define OMAP2430_CONTROL_PADCONF_GPIO_136_OFFSET 0x0b6 -#define OMAP2430_CONTROL_PADCONF_GPIO_137_OFFSET 0x0b7 -#define OMAP2430_CONTROL_PADCONF_GPIO_138_OFFSET 0x0b8 -#define OMAP2430_CONTROL_PADCONF_GPIO_139_OFFSET 0x0b9 -#define OMAP2430_CONTROL_PADCONF_GPIO_140_OFFSET 0x0ba -#define OMAP2430_CONTROL_PADCONF_GPIO_141_OFFSET 0x0bb -#define OMAP2430_CONTROL_PADCONF_GPIO_142_OFFSET 0x0bc -#define OMAP2430_CONTROL_PADCONF_GPIO_154_OFFSET 0x0bd -#define OMAP2430_CONTROL_PADCONF_GPIO_148_OFFSET 0x0be -#define OMAP2430_CONTROL_PADCONF_GPIO_149_OFFSET 0x0bf -#define OMAP2430_CONTROL_PADCONF_GPIO_150_OFFSET 0x0c0 -#define OMAP2430_CONTROL_PADCONF_GPIO_152_OFFSET 0x0c1 -#define OMAP2430_CONTROL_PADCONF_GPIO_153_OFFSET 0x0c2 -#define OMAP2430_CONTROL_PADCONF_SDMMC1_CLKO_OFFSET 0x0c3 -#define OMAP2430_CONTROL_PADCONF_SDMMC1_CMD_OFFSET 0x0c4 -#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET 0x0c5 -#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET 0x0c6 -#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET 0x0c7 -#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET 0x0c8 -#define OMAP2430_CONTROL_PADCONF_SDMMC2_CLKO_OFFSET 0x0c9 -#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET 0x0ca -#define OMAP2430_CONTROL_PADCONF_SDMMC2_CMD_OFFSET 0x0cb -#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET 0x0cc -#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET 0x0cd -#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET 0x0ce -#define OMAP2430_CONTROL_PADCONF_UART2_CTS_OFFSET 0x0cf -#define OMAP2430_CONTROL_PADCONF_UART2_RTS_OFFSET 0x0d0 -#define OMAP2430_CONTROL_PADCONF_UART2_TX_OFFSET 0x0d1 -#define OMAP2430_CONTROL_PADCONF_UART2_RX_OFFSET 0x0d2 -#define OMAP2430_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET 0x0d3 -#define OMAP2430_CONTROL_PADCONF_MCBSP3_FSX_OFFSET 0x0d4 -#define OMAP2430_CONTROL_PADCONF_MCBSP3_DR_OFFSET 0x0d5 -#define OMAP2430_CONTROL_PADCONF_MCBSP3_DX_OFFSET 0x0d6 -#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET 0x0d7 -#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET 0x0d8 -#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET 0x0d9 -#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET 0x0da -#define OMAP2430_CONTROL_PADCONF_GPIO_63_OFFSET 0x0db -#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET 0x0dc -#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET 0x0dd -#define OMAP2430_CONTROL_PADCONF_SSI1_WAKE_OFFSET 0x0de -#define OMAP2430_CONTROL_PADCONF_SPI1_CLK_OFFSET 0x0df -#define OMAP2430_CONTROL_PADCONF_SPI1_SIMO_OFFSET 0x0e0 -#define OMAP2430_CONTROL_PADCONF_SPI1_SOMI_OFFSET 0x0e1 -#define OMAP2430_CONTROL_PADCONF_SPI1_CS0_OFFSET 0x0e2 -#define OMAP2430_CONTROL_PADCONF_SPI1_CS1_OFFSET 0x0e3 -#define OMAP2430_CONTROL_PADCONF_SPI1_CS2_OFFSET 0x0e4 -#define OMAP2430_CONTROL_PADCONF_SPI1_CS3_OFFSET 0x0e5 -#define OMAP2430_CONTROL_PADCONF_SPI2_CLK_OFFSET 0x0e6 -#define OMAP2430_CONTROL_PADCONF_SPI2_SIMO_OFFSET 0x0e7 -#define OMAP2430_CONTROL_PADCONF_SPI2_SOMI_OFFSET 0x0e8 -#define OMAP2430_CONTROL_PADCONF_SPI2_CS0_OFFSET 0x0e9 -#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x0ea -#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x0eb -#define OMAP2430_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x0ec -#define OMAP2430_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x0ed -#define OMAP2430_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x0ee -#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x0ef -#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x0f0 -#define OMAP2430_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x0f1 -#define OMAP2430_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x0f2 -#define OMAP2430_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x0f3 -#define OMAP2430_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x0f4 -#define OMAP2430_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x0f5 -#define OMAP2430_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x0f6 -#define OMAP2430_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x0f7 -#define OMAP2430_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x0f8 -#define OMAP2430_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x0f9 -#define OMAP2430_CONTROL_PADCONF_GPIO_7_OFFSET 0x0fa -#define OMAP2430_CONTROL_PADCONF_GPIO_78_OFFSET 0x0fb -#define OMAP2430_CONTROL_PADCONF_GPIO_79_OFFSET 0x0fc -#define OMAP2430_CONTROL_PADCONF_GPIO_80_OFFSET 0x0fd -#define OMAP2430_CONTROL_PADCONF_GPIO_113_OFFSET 0x0fe -#define OMAP2430_CONTROL_PADCONF_GPIO_114_OFFSET 0x0ff -#define OMAP2430_CONTROL_PADCONF_GPIO_115_OFFSET 0x100 -#define OMAP2430_CONTROL_PADCONF_GPIO_116_OFFSET 0x101 -#define OMAP2430_CONTROL_PADCONF_SYS_DRM_MSECURE_OFFSET 0x102 -#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA3_OFFSET 0x103 -#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA4_OFFSET 0x104 -#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA5_OFFSET 0x105 -#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA6_OFFSET 0x106 -#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA2_OFFSET 0x107 -#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA0_OFFSET 0x108 -#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA1_OFFSET 0x109 -#define OMAP2430_CONTROL_PADCONF_USB0HS_CLK_OFFSET 0x10a -#define OMAP2430_CONTROL_PADCONF_USB0HS_DIR_OFFSET 0x10b -#define OMAP2430_CONTROL_PADCONF_USB0HS_STP_OFFSET 0x10c -#define OMAP2430_CONTROL_PADCONF_USB0HS_NXT_OFFSET 0x10d -#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA7_OFFSET 0x10e -#define OMAP2430_CONTROL_PADCONF_TV_OUT_OFFSET 0x10f -#define OMAP2430_CONTROL_PADCONF_TV_VREF_OFFSET 0x110 -#define OMAP2430_CONTROL_PADCONF_TV_RSET_OFFSET 0x111 -#define OMAP2430_CONTROL_PADCONF_TV_VFB_OFFSET 0x112 -#define OMAP2430_CONTROL_PADCONF_TV_DACOUT_OFFSET 0x113 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD0_OFFSET 0x114 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD1_OFFSET 0x115 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD2_OFFSET 0x116 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD3_OFFSET 0x117 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD4_OFFSET 0x118 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD5_OFFSET 0x119 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD6_OFFSET 0x11a -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD7_OFFSET 0x11b -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD8_OFFSET 0x11c -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD9_OFFSET 0x11d -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD10_OFFSET 0x11e -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD11_OFFSET 0x11f -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD12_OFFSET 0x120 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD13_OFFSET 0x121 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD14_OFFSET 0x122 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD15_OFFSET 0x123 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD16_OFFSET 0x124 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD17_OFFSET 0x125 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD18_OFFSET 0x126 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD19_OFFSET 0x127 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD20_OFFSET 0x128 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD21_OFFSET 0x129 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD22_OFFSET 0x12a -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD23_OFFSET 0x12b -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD24_OFFSET 0x12c -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD25_OFFSET 0x12d -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD26_OFFSET 0x12e -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD27_OFFSET 0x12f -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD28_OFFSET 0x130 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD29_OFFSET 0x131 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD30_OFFSET 0x132 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD31_OFFSET 0x133 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD32_OFFSET 0x134 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD33_OFFSET 0x135 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD34_OFFSET 0x136 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD35_OFFSET 0x137 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD36_OFFSET 0x138 -#define OMAP2430_CONTROL_PADCONF_AD2DMCAD37_OFFSET 0x139 -#define OMAP2430_CONTROL_PADCONF_AD2DMWRITE_OFFSET 0x13a -#define OMAP2430_CONTROL_PADCONF_D2DCLK26MI_OFFSET 0x13b -#define OMAP2430_CONTROL_PADCONF_D2DNRESPWRON1_OFFSET 0x13c -#define OMAP2430_CONTROL_PADCONF_D2DNRESWARM_OFFSET 0x13d -#define OMAP2430_CONTROL_PADCONF_D2DARM9NIRQ_OFFSET 0x13e -#define OMAP2430_CONTROL_PADCONF_D2DUMA2P6FIQ_OFFSET 0x13f -#define OMAP2430_CONTROL_PADCONF_D2DSPINT_OFFSET 0x140 -#define OMAP2430_CONTROL_PADCONF_D2DFRINT_OFFSET 0x141 -#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ0_OFFSET 0x142 -#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ1_OFFSET 0x143 -#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ2_OFFSET 0x144 -#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ3_OFFSET 0x145 -#define OMAP2430_CONTROL_PADCONF_D2DN3GTRST_OFFSET 0x146 -#define OMAP2430_CONTROL_PADCONF_D2DN3GTDI_OFFSET 0x147 -#define OMAP2430_CONTROL_PADCONF_D2DN3GTDO_OFFSET 0x148 -#define OMAP2430_CONTROL_PADCONF_D2DN3GTMS_OFFSET 0x149 -#define OMAP2430_CONTROL_PADCONF_D2DN3GTCK_OFFSET 0x14a -#define OMAP2430_CONTROL_PADCONF_D2DN3GRTCK_OFFSET 0x14b -#define OMAP2430_CONTROL_PADCONF_D2DMSTDBY_OFFSET 0x14c -#define OMAP2430_CONTROL_PADCONF_AD2DSREAD_OFFSET 0x14d -#define OMAP2430_CONTROL_PADCONF_D2DSWAKEUP_OFFSET 0x14e -#define OMAP2430_CONTROL_PADCONF_D2DIDLEREQ_OFFSET 0x14f -#define OMAP2430_CONTROL_PADCONF_D2DIDLEACK_OFFSET 0x150 -#define OMAP2430_CONTROL_PADCONF_D2DSPARE0_OFFSET 0x151 -#define OMAP2430_CONTROL_PADCONF_AD2DSWRITE_OFFSET 0x152 -#define OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET 0x153 - -#define OMAP2430_CONTROL_PADCONF_MUX_SIZE \ - (OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET + 0x1) diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index 8cc7d331437d..3e97c6c8ecf1 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -76,6 +76,13 @@ static inline void omap_barrier_reserve_memblock(void) { } #endif +#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER void set_cntfreq(void); +#else +static inline void set_cntfreq(void) +{ +} +#endif + #endif /* __ASSEMBLER__ */ #endif /* OMAP_ARCH_OMAP_SECURE_H */ diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 57911430324e..b39efd46abf9 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -35,7 +35,6 @@ #include "iomap.h" #include "common.h" #include "mmc.h" -#include "hsmmc.h" #include "prminst44xx.h" #include "prcm_mpu44xx.h" #include "omap4-sar-layout.h" @@ -284,59 +283,3 @@ skip_errata_init: omap_wakeupgen_init(); irqchip_init(); } - -#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) -static int omap4_twl6030_hsmmc_late_init(struct device *dev) -{ - int irq = 0; - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); - struct omap_mmc_platform_data *pdata = dev->platform_data; - - /* Setting MMC1 Card detect Irq */ - if (pdev->id == 0) { - irq = twl6030_mmc_card_detect_config(); - if (irq < 0) { - dev_err(dev, "%s: Error card detect config(%d)\n", - __func__, irq); - return irq; - } - pdata->slots[0].card_detect_irq = irq; - pdata->slots[0].card_detect = twl6030_mmc_card_detect; - } - return 0; -} - -static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev) -{ - struct omap_mmc_platform_data *pdata; - - /* dev can be null if CONFIG_MMC_OMAP_HS is not set */ - if (!dev) { - pr_err("Failed %s\n", __func__); - return; - } - pdata = dev->platform_data; - pdata->init = omap4_twl6030_hsmmc_late_init; -} - -int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) -{ - struct omap2_hsmmc_info *c; - - omap_hsmmc_init(controllers); - for (c = controllers; c->mmc; c++) { - /* pdev can be null if CONFIG_MMC_OMAP_HS is not set */ - if (!c->pdev) - continue; - omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev); - } - - return 0; -} -#else -int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) -{ - return 0; -} -#endif diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 53f0735817bb..828f538b1c4e 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -36,6 +36,7 @@ #include <linux/of.h> #include <linux/notifier.h> +#include "common.h" #include "soc.h" #include "omap_device.h" #include "omap_hwmod.h" @@ -200,6 +201,7 @@ static int _omap_device_notifier_call(struct notifier_block *nb, case BUS_NOTIFY_ADD_DEVICE: if (pdev->dev.of_node) omap_device_build_from_dt(pdev); + omap_auxdata_legacy_init(dev); /* fall through */ default: od = to_omap_device(pdev); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e3f0ecaf87dd..ee655dab672f 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2326,38 +2326,80 @@ static int _shutdown(struct omap_hwmod *oh) return 0; } +static int of_dev_find_hwmod(struct device_node *np, + struct omap_hwmod *oh) +{ + int count, i, res; + const char *p; + + count = of_property_count_strings(np, "ti,hwmods"); + if (count < 1) + return -ENODEV; + + for (i = 0; i < count; i++) { + res = of_property_read_string_index(np, "ti,hwmods", + i, &p); + if (res) + continue; + if (!strcmp(p, oh->name)) { + pr_debug("omap_hwmod: dt %s[%i] uses hwmod %s\n", + np->name, i, oh->name); + return i; + } + } + + return -ENODEV; +} + /** * of_dev_hwmod_lookup - look up needed hwmod from dt blob * @np: struct device_node * * @oh: struct omap_hwmod * + * @index: index of the entry found + * @found: struct device_node * found or NULL * * Parse the dt blob and find out needed hwmod. Recursive function is * implemented to take care hierarchical dt blob parsing. - * Return: The device node on success or NULL on failure. + * Return: Returns 0 on success, -ENODEV when not found. */ -static struct device_node *of_dev_hwmod_lookup(struct device_node *np, - struct omap_hwmod *oh) +static int of_dev_hwmod_lookup(struct device_node *np, + struct omap_hwmod *oh, + int *index, + struct device_node **found) { - struct device_node *np0 = NULL, *np1 = NULL; - const char *p; + struct device_node *np0 = NULL; + int res; + + res = of_dev_find_hwmod(np, oh); + if (res >= 0) { + *found = np; + *index = res; + return 0; + } for_each_child_of_node(np, np0) { - if (of_find_property(np0, "ti,hwmods", NULL)) { - p = of_get_property(np0, "ti,hwmods", NULL); - if (!strcmp(p, oh->name)) - return np0; - np1 = of_dev_hwmod_lookup(np0, oh); - if (np1) - return np1; + struct device_node *fc; + int i; + + res = of_dev_hwmod_lookup(np0, oh, &i, &fc); + if (res == 0) { + *found = fc; + *index = i; + return 0; } } - return NULL; + + *found = NULL; + *index = 0; + + return -ENODEV; } /** * _init_mpu_rt_base - populate the virtual address for a hwmod * @oh: struct omap_hwmod * to locate the virtual address * @data: (unused, caller should pass NULL) + * @index: index of the reg entry iospace in device tree * @np: struct device_node * of the IP block's device node in the DT data * * Cache the virtual address used by the MPU to access this IP block's @@ -2368,7 +2410,7 @@ static struct device_node *of_dev_hwmod_lookup(struct device_node *np, * -ENXIO on absent or invalid register target address space. */ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, - struct device_node *np) + int index, struct device_node *np) { struct omap_hwmod_addr_space *mem; void __iomem *va_start = NULL; @@ -2390,13 +2432,17 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, if (!np) return -ENXIO; - va_start = of_iomap(np, oh->mpu_rt_idx); + va_start = of_iomap(np, index + oh->mpu_rt_idx); } else { va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); } if (!va_start) { - pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); + if (mem) + pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); + else + pr_err("omap_hwmod: %s: Missing dt reg%i for %s\n", + oh->name, index, np->full_name); return -ENXIO; } @@ -2422,17 +2468,29 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, */ static int __init _init(struct omap_hwmod *oh, void *data) { - int r; + int r, index; struct device_node *np = NULL; if (oh->_state != _HWMOD_STATE_REGISTERED) return 0; - if (of_have_populated_dt()) - np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh); + if (of_have_populated_dt()) { + struct device_node *bus; + + bus = of_find_node_by_name(NULL, "ocp"); + if (!bus) + return -ENODEV; + + r = of_dev_hwmod_lookup(bus, oh, &index, &np); + if (r) + pr_debug("omap_hwmod: %s missing dt data\n", oh->name); + else if (np && index) + pr_warn("omap_hwmod: %s using broken dt data from %s\n", + oh->name, np->name); + } if (oh->class->sysc) { - r = _init_mpu_rt_base(oh, NULL, np); + r = _init_mpu_rt_base(oh, NULL, index, np); if (r < 0) { WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n", oh->name); diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index d8b9d60f854f..2f15979c2e9c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -108,8 +108,6 @@ static struct omap_i2c_dev_attr i2c_dev_attr = { /* I2C1 */ static struct omap_hwmod omap2420_i2c1_hwmod = { .name = "i2c1", - .mpu_irqs = omap2_i2c1_mpu_irqs, - .sdma_reqs = omap2_i2c1_sdma_reqs, .main_clk = "i2c1_fck", .prcm = { .omap2 = { @@ -133,8 +131,6 @@ static struct omap_hwmod omap2420_i2c1_hwmod = { /* I2C2 */ static struct omap_hwmod omap2420_i2c2_hwmod = { .name = "i2c2", - .mpu_irqs = omap2_i2c2_mpu_irqs, - .sdma_reqs = omap2_i2c2_sdma_reqs, .main_clk = "i2c2_fck", .prcm = { .omap2 = { @@ -179,16 +175,9 @@ static struct omap_mbox_pdata omap2420_mailbox_attrs = { .info = omap2420_mailbox_info, }; -static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = { - { .name = "dsp", .irq = 26 + OMAP_INTC_START, }, - { .name = "iva", .irq = 34 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - static struct omap_hwmod omap2420_mailbox_hwmod = { .name = "mailbox", .class = &omap2xxx_mailbox_hwmod_class, - .mpu_irqs = omap2420_mailbox_irqs, .main_clk = "mailboxes_ick", .prcm = { .omap2 = { @@ -217,17 +206,9 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { }; /* mcbsp1 */ -static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = { - { .name = "tx", .irq = 59 + OMAP_INTC_START, }, - { .name = "rx", .irq = 60 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - static struct omap_hwmod omap2420_mcbsp1_hwmod = { .name = "mcbsp1", .class = &omap2420_mcbsp_hwmod_class, - .mpu_irqs = omap2420_mcbsp1_irqs, - .sdma_reqs = omap2_mcbsp1_sdma_reqs, .main_clk = "mcbsp1_fck", .prcm = { .omap2 = { @@ -243,17 +224,9 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = { }; /* mcbsp2 */ -static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = { - { .name = "tx", .irq = 62 + OMAP_INTC_START, }, - { .name = "rx", .irq = 63 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - static struct omap_hwmod omap2420_mcbsp2_hwmod = { .name = "mcbsp2", .class = &omap2420_mcbsp_hwmod_class, - .mpu_irqs = omap2420_mcbsp2_irqs, - .sdma_reqs = omap2_mcbsp2_sdma_reqs, .main_clk = "mcbsp2_fck", .prcm = { .omap2 = { @@ -283,22 +256,9 @@ static struct omap_hwmod_class omap2420_msdi_hwmod_class = { }; /* msdi1 */ -static struct omap_hwmod_irq_info omap2420_msdi1_irqs[] = { - { .irq = 83 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -static struct omap_hwmod_dma_info omap2420_msdi1_sdma_reqs[] = { - { .name = "tx", .dma_req = 61 }, /* OMAP24XX_DMA_MMC1_TX */ - { .name = "rx", .dma_req = 62 }, /* OMAP24XX_DMA_MMC1_RX */ - { .dma_req = -1 } -}; - static struct omap_hwmod omap2420_msdi1_hwmod = { .name = "msdi1", .class = &omap2420_msdi_hwmod_class, - .mpu_irqs = omap2420_msdi1_irqs, - .sdma_reqs = omap2420_msdi1_sdma_reqs, .main_clk = "mmc_fck", .prcm = { .omap2 = { @@ -315,7 +275,6 @@ static struct omap_hwmod omap2420_msdi1_hwmod = { /* HDQ1W/1-wire */ static struct omap_hwmod omap2420_hdq1w_hwmod = { .name = "hdq1w", - .mpu_irqs = omap2_hdq1w_mpu_irqs, .main_clk = "hdq_fck", .prcm = { .omap2 = { @@ -338,7 +297,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__i2c1 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2420_i2c1_hwmod, .clk = "i2c1_ick", - .addr = omap2_i2c1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -347,7 +305,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__i2c2 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2420_i2c2_hwmod, .clk = "i2c2_ick", - .addr = omap2_i2c2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -367,111 +324,51 @@ static struct omap_hwmod_ocp_if omap2420_l3__dsp = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap2420_timer1_addrs[] = { - { - .pa_start = 0x48028000, - .pa_end = 0x48028000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_wkup -> timer1 */ static struct omap_hwmod_ocp_if omap2420_l4_wkup__timer1 = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_timer1_hwmod, .clk = "gpt1_ick", - .addr = omap2420_timer1_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_wkup -> wd_timer2 */ -static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = { - { - .pa_start = 0x48022000, - .pa_end = 0x4802207f, - .flags = ADDR_TYPE_RT - }, - { } -}; - static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_wd_timer2_hwmod, .clk = "mpu_wdt_ick", - .addr = omap2420_wd_timer2_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_wkup -> gpio1 */ -static struct omap_hwmod_addr_space omap2420_gpio1_addr_space[] = { - { - .pa_start = 0x48018000, - .pa_end = 0x480181ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_gpio1_hwmod, .clk = "gpios_ick", - .addr = omap2420_gpio1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_wkup -> gpio2 */ -static struct omap_hwmod_addr_space omap2420_gpio2_addr_space[] = { - { - .pa_start = 0x4801a000, - .pa_end = 0x4801a1ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_gpio2_hwmod, .clk = "gpios_ick", - .addr = omap2420_gpio2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_wkup -> gpio3 */ -static struct omap_hwmod_addr_space omap2420_gpio3_addr_space[] = { - { - .pa_start = 0x4801c000, - .pa_end = 0x4801c1ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_gpio3_hwmod, .clk = "gpios_ick", - .addr = omap2420_gpio3_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_wkup -> gpio4 */ -static struct omap_hwmod_addr_space omap2420_gpio4_addr_space[] = { - { - .pa_start = 0x4801e000, - .pa_end = 0x4801e1ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_gpio4_hwmod, .clk = "gpios_ick", - .addr = omap2420_gpio4_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -496,7 +393,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = { static struct omap_hwmod_ocp_if omap2420_l4_core__mailbox = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2420_mailbox_hwmod, - .addr = omap2_mailbox_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -505,7 +401,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp1 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2420_mcbsp1_hwmod, .clk = "mcbsp1_ick", - .addr = omap2_mcbsp1_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -514,25 +409,14 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp2 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2420_mcbsp2_hwmod, .clk = "mcbsp2_ick", - .addr = omap2xxx_mcbsp2_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap2420_msdi1_addrs[] = { - { - .pa_start = 0x4809c000, - .pa_end = 0x4809c000 + SZ_128 - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - /* l4_core -> msdi1 */ static struct omap_hwmod_ocp_if omap2420_l4_core__msdi1 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2420_msdi1_hwmod, .clk = "mmc_ick", - .addr = omap2420_msdi1_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -541,36 +425,16 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__hdq1w = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2420_hdq1w_hwmod, .clk = "hdq_ick", - .addr = omap2_hdq1w_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE, }; /* l4_wkup -> 32ksync_counter */ -static struct omap_hwmod_addr_space omap2420_counter_32k_addrs[] = { - { - .pa_start = 0x48004000, - .pa_end = 0x4800401f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_addr_space omap2420_gpmc_addrs[] = { - { - .pa_start = 0x6800a000, - .pa_end = 0x6800afff, - .flags = ADDR_TYPE_RT - }, - { } -}; - static struct omap_hwmod_ocp_if omap2420_l4_wkup__counter_32k = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_counter_32k_hwmod, .clk = "sync_32k_ick", - .addr = omap2420_counter_32k_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -578,7 +442,6 @@ static struct omap_hwmod_ocp_if omap2420_l3__gpmc = { .master = &omap2xxx_l3_main_hwmod, .slave = &omap2xxx_gpmc_hwmod, .clk = "core_l3_ck", - .addr = omap2420_gpmc_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 5b9083461dc5..6d1b60902179 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -86,8 +86,6 @@ static struct omap_i2c_dev_attr i2c_dev_attr = { static struct omap_hwmod omap2430_i2c1_hwmod = { .name = "i2c1", .flags = HWMOD_16BIT_REG, - .mpu_irqs = omap2_i2c1_mpu_irqs, - .sdma_reqs = omap2_i2c1_sdma_reqs, .main_clk = "i2chs1_fck", .prcm = { .omap2 = { @@ -114,8 +112,6 @@ static struct omap_hwmod omap2430_i2c1_hwmod = { static struct omap_hwmod omap2430_i2c2_hwmod = { .name = "i2c2", .flags = HWMOD_16BIT_REG, - .mpu_irqs = omap2_i2c2_mpu_irqs, - .sdma_reqs = omap2_i2c2_sdma_reqs, .main_clk = "i2chs2_fck", .prcm = { .omap2 = { @@ -131,15 +127,9 @@ static struct omap_hwmod omap2430_i2c2_hwmod = { }; /* gpio5 */ -static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = { - { .irq = 33 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK5 */ - { .irq = -1 }, -}; - static struct omap_hwmod omap2430_gpio5_hwmod = { .name = "gpio5", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap243x_gpio5_irqs, .main_clk = "gpio5_fck", .prcm = { .omap2 = { @@ -182,15 +172,9 @@ static struct omap_mbox_pdata omap2430_mailbox_attrs = { .info = omap2430_mailbox_info, }; -static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = { - { .irq = 26 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - static struct omap_hwmod omap2430_mailbox_hwmod = { .name = "mailbox", .class = &omap2xxx_mailbox_hwmod_class, - .mpu_irqs = omap2430_mailbox_irqs, .main_clk = "mailboxes_ick", .prcm = { .omap2 = { @@ -205,27 +189,12 @@ static struct omap_hwmod omap2430_mailbox_hwmod = { }; /* mcspi3 */ -static struct omap_hwmod_irq_info omap2430_mcspi3_mpu_irqs[] = { - { .irq = 91 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = { - { .name = "tx0", .dma_req = 15 }, /* DMA_SPI3_TX0 */ - { .name = "rx0", .dma_req = 16 }, /* DMA_SPI3_RX0 */ - { .name = "tx1", .dma_req = 23 }, /* DMA_SPI3_TX1 */ - { .name = "rx1", .dma_req = 24 }, /* DMA_SPI3_RX1 */ - { .dma_req = -1 } -}; - static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = { .num_chipselect = 2, }; static struct omap_hwmod omap2430_mcspi3_hwmod = { .name = "mcspi3", - .mpu_irqs = omap2430_mcspi3_mpu_irqs, - .sdma_reqs = omap2430_mcspi3_sdma_reqs, .main_clk = "mcspi3_fck", .prcm = { .omap2 = { @@ -259,16 +228,8 @@ static struct omap_hwmod_class usbotg_class = { }; /* usb_otg_hs */ -static struct omap_hwmod_irq_info omap2430_usbhsotg_mpu_irqs[] = { - - { .name = "mc", .irq = 92 + OMAP_INTC_START, }, - { .name = "dma", .irq = 93 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - static struct omap_hwmod omap2430_usbhsotg_hwmod = { .name = "usb_otg_hs", - .mpu_irqs = omap2430_usbhsotg_mpu_irqs, .main_clk = "usbhs_ick", .prcm = { .omap2 = { @@ -313,19 +274,9 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { }; /* mcbsp1 */ -static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = { - { .name = "tx", .irq = 59 + OMAP_INTC_START, }, - { .name = "rx", .irq = 60 + OMAP_INTC_START, }, - { .name = "ovr", .irq = 61 + OMAP_INTC_START, }, - { .name = "common", .irq = 64 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - static struct omap_hwmod omap2430_mcbsp1_hwmod = { .name = "mcbsp1", .class = &omap2430_mcbsp_hwmod_class, - .mpu_irqs = omap2430_mcbsp1_irqs, - .sdma_reqs = omap2_mcbsp1_sdma_reqs, .main_clk = "mcbsp1_fck", .prcm = { .omap2 = { @@ -341,18 +292,9 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = { }; /* mcbsp2 */ -static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = { - { .name = "tx", .irq = 62 + OMAP_INTC_START, }, - { .name = "rx", .irq = 63 + OMAP_INTC_START, }, - { .name = "common", .irq = 16 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - static struct omap_hwmod omap2430_mcbsp2_hwmod = { .name = "mcbsp2", .class = &omap2430_mcbsp_hwmod_class, - .mpu_irqs = omap2430_mcbsp2_irqs, - .sdma_reqs = omap2_mcbsp2_sdma_reqs, .main_clk = "mcbsp2_fck", .prcm = { .omap2 = { @@ -368,18 +310,9 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = { }; /* mcbsp3 */ -static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = { - { .name = "tx", .irq = 89 + OMAP_INTC_START, }, - { .name = "rx", .irq = 90 + OMAP_INTC_START, }, - { .name = "common", .irq = 17 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - static struct omap_hwmod omap2430_mcbsp3_hwmod = { .name = "mcbsp3", .class = &omap2430_mcbsp_hwmod_class, - .mpu_irqs = omap2430_mcbsp3_irqs, - .sdma_reqs = omap2_mcbsp3_sdma_reqs, .main_clk = "mcbsp3_fck", .prcm = { .omap2 = { @@ -395,24 +328,9 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = { }; /* mcbsp4 */ -static struct omap_hwmod_irq_info omap2430_mcbsp4_irqs[] = { - { .name = "tx", .irq = 54 + OMAP_INTC_START, }, - { .name = "rx", .irq = 55 + OMAP_INTC_START, }, - { .name = "common", .irq = 18 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = { - { .name = "rx", .dma_req = 20 }, - { .name = "tx", .dma_req = 19 }, - { .dma_req = -1 } -}; - static struct omap_hwmod omap2430_mcbsp4_hwmod = { .name = "mcbsp4", .class = &omap2430_mcbsp_hwmod_class, - .mpu_irqs = omap2430_mcbsp4_irqs, - .sdma_reqs = omap2430_mcbsp4_sdma_chs, .main_clk = "mcbsp4_fck", .prcm = { .omap2 = { @@ -428,24 +346,9 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = { }; /* mcbsp5 */ -static struct omap_hwmod_irq_info omap2430_mcbsp5_irqs[] = { - { .name = "tx", .irq = 81 + OMAP_INTC_START, }, - { .name = "rx", .irq = 82 + OMAP_INTC_START, }, - { .name = "common", .irq = 19 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = { - { .name = "rx", .dma_req = 22 }, - { .name = "tx", .dma_req = 21 }, - { .dma_req = -1 } -}; - static struct omap_hwmod omap2430_mcbsp5_hwmod = { .name = "mcbsp5", .class = &omap2430_mcbsp_hwmod_class, - .mpu_irqs = omap2430_mcbsp5_irqs, - .sdma_reqs = omap2430_mcbsp5_sdma_chs, .main_clk = "mcbsp5_fck", .prcm = { .omap2 = { @@ -478,17 +381,6 @@ static struct omap_hwmod_class omap2430_mmc_class = { }; /* MMC/SD/SDIO1 */ -static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = { - { .irq = 83 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -static struct omap_hwmod_dma_info omap2430_mmc1_sdma_reqs[] = { - { .name = "tx", .dma_req = 61 }, /* DMA_MMC1_TX */ - { .name = "rx", .dma_req = 62 }, /* DMA_MMC1_RX */ - { .dma_req = -1 } -}; - static struct omap_hwmod_opt_clk omap2430_mmc1_opt_clks[] = { { .role = "dbck", .clk = "mmchsdb1_fck" }, }; @@ -500,8 +392,6 @@ static struct omap_mmc_dev_attr mmc1_dev_attr = { static struct omap_hwmod omap2430_mmc1_hwmod = { .name = "mmc1", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2430_mmc1_mpu_irqs, - .sdma_reqs = omap2430_mmc1_sdma_reqs, .opt_clks = omap2430_mmc1_opt_clks, .opt_clks_cnt = ARRAY_SIZE(omap2430_mmc1_opt_clks), .main_clk = "mmchs1_fck", @@ -519,17 +409,6 @@ static struct omap_hwmod omap2430_mmc1_hwmod = { }; /* MMC/SD/SDIO2 */ -static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = { - { .irq = 86 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -static struct omap_hwmod_dma_info omap2430_mmc2_sdma_reqs[] = { - { .name = "tx", .dma_req = 47 }, /* DMA_MMC2_TX */ - { .name = "rx", .dma_req = 48 }, /* DMA_MMC2_RX */ - { .dma_req = -1 } -}; - static struct omap_hwmod_opt_clk omap2430_mmc2_opt_clks[] = { { .role = "dbck", .clk = "mmchsdb2_fck" }, }; @@ -537,8 +416,6 @@ static struct omap_hwmod_opt_clk omap2430_mmc2_opt_clks[] = { static struct omap_hwmod omap2430_mmc2_hwmod = { .name = "mmc2", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2430_mmc2_mpu_irqs, - .sdma_reqs = omap2430_mmc2_sdma_reqs, .opt_clks = omap2430_mmc2_opt_clks, .opt_clks_cnt = ARRAY_SIZE(omap2430_mmc2_opt_clks), .main_clk = "mmchs2_fck", @@ -557,7 +434,6 @@ static struct omap_hwmod omap2430_mmc2_hwmod = { /* HDQ1W/1-wire */ static struct omap_hwmod omap2430_hdq1w_hwmod = { .name = "hdq1w", - .mpu_irqs = omap2_hdq1w_mpu_irqs, .main_clk = "hdq_fck", .prcm = { .omap2 = { @@ -589,7 +465,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__i2c1 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2430_i2c1_hwmod, .clk = "i2c1_ick", - .addr = omap2_i2c1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -598,25 +473,14 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__i2c2 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2430_i2c2_hwmod, .clk = "i2c2_ick", - .addr = omap2_i2c2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = { - { - .pa_start = OMAP243X_HS_BASE, - .pa_end = OMAP243X_HS_BASE + SZ_4K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_core ->usbhsotg interface */ static struct omap_hwmod_ocp_if omap2430_l4_core__usbhsotg = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2430_usbhsotg_hwmod, .clk = "usb_l4_ick", - .addr = omap2430_usbhsotg_addrs, .user = OCP_USER_MPU, }; @@ -625,7 +489,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mmc1 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2430_mmc1_hwmod, .clk = "mmchs1_ick", - .addr = omap2430_mmc1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -634,7 +497,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mmc2 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2430_mmc2_hwmod, .clk = "mmchs2_ick", - .addr = omap2430_mmc2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -643,7 +505,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi3 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2430_mcspi3_hwmod, .clk = "mcspi3_ick", - .addr = omap2430_mcspi3_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -655,129 +516,59 @@ static struct omap_hwmod_ocp_if omap2430_l3__iva = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap2430_timer1_addrs[] = { - { - .pa_start = 0x49018000, - .pa_end = 0x49018000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_wkup -> timer1 */ static struct omap_hwmod_ocp_if omap2430_l4_wkup__timer1 = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_timer1_hwmod, .clk = "gpt1_ick", - .addr = omap2430_timer1_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_wkup -> wd_timer2 */ -static struct omap_hwmod_addr_space omap2430_wd_timer2_addrs[] = { - { - .pa_start = 0x49016000, - .pa_end = 0x4901607f, - .flags = ADDR_TYPE_RT - }, - { } -}; - static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_wd_timer2_hwmod, .clk = "mpu_wdt_ick", - .addr = omap2430_wd_timer2_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_wkup -> gpio1 */ -static struct omap_hwmod_addr_space omap2430_gpio1_addr_space[] = { - { - .pa_start = 0x4900C000, - .pa_end = 0x4900C1ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_gpio1_hwmod, .clk = "gpios_ick", - .addr = omap2430_gpio1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_wkup -> gpio2 */ -static struct omap_hwmod_addr_space omap2430_gpio2_addr_space[] = { - { - .pa_start = 0x4900E000, - .pa_end = 0x4900E1ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_gpio2_hwmod, .clk = "gpios_ick", - .addr = omap2430_gpio2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_wkup -> gpio3 */ -static struct omap_hwmod_addr_space omap2430_gpio3_addr_space[] = { - { - .pa_start = 0x49010000, - .pa_end = 0x490101ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_gpio3_hwmod, .clk = "gpios_ick", - .addr = omap2430_gpio3_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_wkup -> gpio4 */ -static struct omap_hwmod_addr_space omap2430_gpio4_addr_space[] = { - { - .pa_start = 0x49012000, - .pa_end = 0x490121ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_gpio4_hwmod, .clk = "gpios_ick", - .addr = omap2430_gpio4_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_core -> gpio5 */ -static struct omap_hwmod_addr_space omap2430_gpio5_addr_space[] = { - { - .pa_start = 0x480B6000, - .pa_end = 0x480B61ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2430_gpio5_hwmod, .clk = "gpio5_ick", - .addr = omap2430_gpio5_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -802,7 +593,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = { static struct omap_hwmod_ocp_if omap2430_l4_core__mailbox = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2430_mailbox_hwmod, - .addr = omap2_mailbox_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -811,7 +601,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp1 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2430_mcbsp1_hwmod, .clk = "mcbsp1_ick", - .addr = omap2_mcbsp1_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -820,64 +609,30 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp2 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2430_mcbsp2_hwmod, .clk = "mcbsp2_ick", - .addr = omap2xxx_mcbsp2_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap2430_mcbsp3_addrs[] = { - { - .name = "mpu", - .pa_start = 0x4808C000, - .pa_end = 0x4808C0ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_core -> mcbsp3 */ static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp3 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2430_mcbsp3_hwmod, .clk = "mcbsp3_ick", - .addr = omap2430_mcbsp3_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap2430_mcbsp4_addrs[] = { - { - .name = "mpu", - .pa_start = 0x4808E000, - .pa_end = 0x4808E0ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_core -> mcbsp4 */ static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp4 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2430_mcbsp4_hwmod, .clk = "mcbsp4_ick", - .addr = omap2430_mcbsp4_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap2430_mcbsp5_addrs[] = { - { - .name = "mpu", - .pa_start = 0x48096000, - .pa_end = 0x480960ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_core -> mcbsp5 */ static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp5 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2430_mcbsp5_hwmod, .clk = "mcbsp5_ick", - .addr = omap2430_mcbsp5_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -886,35 +641,15 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__hdq1w = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2430_hdq1w_hwmod, .clk = "hdq_ick", - .addr = omap2_hdq1w_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE, }; /* l4_wkup -> 32ksync_counter */ -static struct omap_hwmod_addr_space omap2430_counter_32k_addrs[] = { - { - .pa_start = 0x49020000, - .pa_end = 0x4902001f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_addr_space omap2430_gpmc_addrs[] = { - { - .pa_start = 0x6e000000, - .pa_end = 0x6e000fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - static struct omap_hwmod_ocp_if omap2430_l4_wkup__counter_32k = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_counter_32k_hwmod, .clk = "sync_32k_ick", - .addr = omap2430_counter_32k_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -922,7 +657,6 @@ static struct omap_hwmod_ocp_if omap2430_l3__gpmc = { .master = &omap2xxx_l3_main_hwmod, .slave = &omap2xxx_gpmc_hwmod, .clk = "core_l3_ck", - .addr = omap2430_gpmc_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c index 5fd40d4a989e..656861c29d5c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c @@ -20,142 +20,6 @@ #include "omap_hwmod_common_data.h" -static struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[] = { - { - .pa_start = OMAP2_UART1_BASE, - .pa_end = OMAP2_UART1_BASE + SZ_8K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[] = { - { - .pa_start = OMAP2_UART2_BASE, - .pa_end = OMAP2_UART2_BASE + SZ_1K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[] = { - { - .pa_start = OMAP2_UART3_BASE, - .pa_end = OMAP2_UART3_BASE + SZ_1K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_addr_space omap2xxx_timer2_addrs[] = { - { - .pa_start = 0x4802a000, - .pa_end = 0x4802a000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_addr_space omap2xxx_timer3_addrs[] = { - { - .pa_start = 0x48078000, - .pa_end = 0x48078000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_addr_space omap2xxx_timer4_addrs[] = { - { - .pa_start = 0x4807a000, - .pa_end = 0x4807a000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_addr_space omap2xxx_timer5_addrs[] = { - { - .pa_start = 0x4807c000, - .pa_end = 0x4807c000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_addr_space omap2xxx_timer6_addrs[] = { - { - .pa_start = 0x4807e000, - .pa_end = 0x4807e000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_addr_space omap2xxx_timer7_addrs[] = { - { - .pa_start = 0x48080000, - .pa_end = 0x48080000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_addr_space omap2xxx_timer8_addrs[] = { - { - .pa_start = 0x48082000, - .pa_end = 0x48082000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_addr_space omap2xxx_timer9_addrs[] = { - { - .pa_start = 0x48084000, - .pa_end = 0x48084000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[] = { - { - .name = "mpu", - .pa_start = 0x48076000, - .pa_end = 0x480760ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_addr_space omap2_rng_addr_space[] = { - { - .pa_start = 0x480a0000, - .pa_end = 0x480a004f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_addr_space omap2xxx_sham_addrs[] = { - { - .pa_start = 0x480a4000, - .pa_end = 0x480a4000 + 0x64 - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_addr_space omap2xxx_aes_addrs[] = { - { - .pa_start = 0x480a6000, - .pa_end = 0x480a6000 + 0x50 - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* * Common interconnect data */ @@ -182,7 +46,7 @@ struct omap_hwmod_ocp_if omap2xxx_dss__l3 = { .omap2 = { .l3_perm_bit = OMAP2_L3_CORE_FW_CONNID_DSS, .flags = OMAP_FIREWALL_L3, - } + }, }, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -199,7 +63,6 @@ struct omap_hwmod_ocp_if omap2_l4_core__uart1 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_uart1_hwmod, .clk = "uart1_ick", - .addr = omap2xxx_uart1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -208,7 +71,6 @@ struct omap_hwmod_ocp_if omap2_l4_core__uart2 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_uart2_hwmod, .clk = "uart2_ick", - .addr = omap2xxx_uart2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -217,7 +79,6 @@ struct omap_hwmod_ocp_if omap2_l4_core__uart3 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_uart3_hwmod, .clk = "uart3_ick", - .addr = omap2xxx_uart3_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -226,7 +87,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi1 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_mcspi1_hwmod, .clk = "mcspi1_ick", - .addr = omap2_mcspi1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -235,7 +95,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_mcspi2_hwmod, .clk = "mcspi2_ick", - .addr = omap2_mcspi2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -244,7 +103,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer2 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_timer2_hwmod, .clk = "gpt2_ick", - .addr = omap2xxx_timer2_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -253,7 +111,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_timer3_hwmod, .clk = "gpt3_ick", - .addr = omap2xxx_timer3_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -262,7 +119,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer4 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_timer4_hwmod, .clk = "gpt4_ick", - .addr = omap2xxx_timer4_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -271,7 +127,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer5 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_timer5_hwmod, .clk = "gpt5_ick", - .addr = omap2xxx_timer5_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -280,7 +135,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer6 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_timer6_hwmod, .clk = "gpt6_ick", - .addr = omap2xxx_timer6_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -289,7 +143,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer7 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_timer7_hwmod, .clk = "gpt7_ick", - .addr = omap2xxx_timer7_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -298,7 +151,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer8 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_timer8_hwmod, .clk = "gpt8_ick", - .addr = omap2xxx_timer8_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -307,7 +159,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer9 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_timer9_hwmod, .clk = "gpt9_ick", - .addr = omap2xxx_timer9_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -316,7 +167,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer10 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_timer10_hwmod, .clk = "gpt10_ick", - .addr = omap2_timer10_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -325,7 +175,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer11 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_timer11_hwmod, .clk = "gpt11_ick", - .addr = omap2_timer11_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -334,7 +183,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer12 = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_timer12_hwmod, .clk = "gpt12_ick", - .addr = omap2xxx_timer12_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -348,7 +196,7 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss = { .omap2 = { .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION, .flags = OMAP_FIREWALL_L4, - } + }, }, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -363,7 +211,7 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc = { .omap2 = { .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION, .flags = OMAP_FIREWALL_L4, - } + }, }, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -378,7 +226,7 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi = { .omap2 = { .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION, .flags = OMAP_FIREWALL_L4, - } + }, }, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -393,7 +241,7 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc = { .omap2 = { .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_VENC_REGION, .flags = OMAP_FIREWALL_L4, - } + }, }, .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, @@ -404,7 +252,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__rng = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_rng_hwmod, .clk = "rng_ick", - .addr = omap2_rng_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -413,7 +260,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__sham = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_sham_hwmod, .clk = "sha_ick", - .addr = omap2xxx_sham_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -422,6 +268,5 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__aes = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_aes_hwmod, .clk = "aes_ick", - .addr = omap2xxx_aes_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 56cebb05509e..8821b9d6bae4 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -20,14 +20,9 @@ #include "prm-regbits-24xx.h" #include "wd_timer.h" -struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[] = { - { .irq = 48 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, - { .dma_req = -1 } + { .dma_req = -1, }, }; /* @@ -219,14 +214,8 @@ struct omap_hwmod omap2xxx_l4_wkup_hwmod = { }; /* MPU */ -static struct omap_hwmod_irq_info omap2xxx_mpu_irqs[] = { - { .name = "pmu", .irq = 3 + OMAP_INTC_START }, - { .irq = -1 } -}; - struct omap_hwmod omap2xxx_mpu_hwmod = { .name = "mpu", - .mpu_irqs = omap2xxx_mpu_irqs, .class = &mpu_hwmod_class, .main_clk = "mpu_ck", }; @@ -256,7 +245,6 @@ static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = { struct omap_hwmod omap2xxx_timer1_hwmod = { .name = "timer1", - .mpu_irqs = omap2_timer1_mpu_irqs, .main_clk = "gpt1_fck", .prcm = { .omap2 = { @@ -276,7 +264,6 @@ struct omap_hwmod omap2xxx_timer1_hwmod = { struct omap_hwmod omap2xxx_timer2_hwmod = { .name = "timer2", - .mpu_irqs = omap2_timer2_mpu_irqs, .main_clk = "gpt2_fck", .prcm = { .omap2 = { @@ -295,7 +282,6 @@ struct omap_hwmod omap2xxx_timer2_hwmod = { struct omap_hwmod omap2xxx_timer3_hwmod = { .name = "timer3", - .mpu_irqs = omap2_timer3_mpu_irqs, .main_clk = "gpt3_fck", .prcm = { .omap2 = { @@ -314,7 +300,6 @@ struct omap_hwmod omap2xxx_timer3_hwmod = { struct omap_hwmod omap2xxx_timer4_hwmod = { .name = "timer4", - .mpu_irqs = omap2_timer4_mpu_irqs, .main_clk = "gpt4_fck", .prcm = { .omap2 = { @@ -333,7 +318,6 @@ struct omap_hwmod omap2xxx_timer4_hwmod = { struct omap_hwmod omap2xxx_timer5_hwmod = { .name = "timer5", - .mpu_irqs = omap2_timer5_mpu_irqs, .main_clk = "gpt5_fck", .prcm = { .omap2 = { @@ -353,7 +337,6 @@ struct omap_hwmod omap2xxx_timer5_hwmod = { struct omap_hwmod omap2xxx_timer6_hwmod = { .name = "timer6", - .mpu_irqs = omap2_timer6_mpu_irqs, .main_clk = "gpt6_fck", .prcm = { .omap2 = { @@ -373,7 +356,6 @@ struct omap_hwmod omap2xxx_timer6_hwmod = { struct omap_hwmod omap2xxx_timer7_hwmod = { .name = "timer7", - .mpu_irqs = omap2_timer7_mpu_irqs, .main_clk = "gpt7_fck", .prcm = { .omap2 = { @@ -393,7 +375,6 @@ struct omap_hwmod omap2xxx_timer7_hwmod = { struct omap_hwmod omap2xxx_timer8_hwmod = { .name = "timer8", - .mpu_irqs = omap2_timer8_mpu_irqs, .main_clk = "gpt8_fck", .prcm = { .omap2 = { @@ -413,7 +394,6 @@ struct omap_hwmod omap2xxx_timer8_hwmod = { struct omap_hwmod omap2xxx_timer9_hwmod = { .name = "timer9", - .mpu_irqs = omap2_timer9_mpu_irqs, .main_clk = "gpt9_fck", .prcm = { .omap2 = { @@ -433,7 +413,6 @@ struct omap_hwmod omap2xxx_timer9_hwmod = { struct omap_hwmod omap2xxx_timer10_hwmod = { .name = "timer10", - .mpu_irqs = omap2_timer10_mpu_irqs, .main_clk = "gpt10_fck", .prcm = { .omap2 = { @@ -453,7 +432,6 @@ struct omap_hwmod omap2xxx_timer10_hwmod = { struct omap_hwmod omap2xxx_timer11_hwmod = { .name = "timer11", - .mpu_irqs = omap2_timer11_mpu_irqs, .main_clk = "gpt11_fck", .prcm = { .omap2 = { @@ -473,7 +451,6 @@ struct omap_hwmod omap2xxx_timer11_hwmod = { struct omap_hwmod omap2xxx_timer12_hwmod = { .name = "timer12", - .mpu_irqs = omap2xxx_timer12_mpu_irqs, .main_clk = "gpt12_fck", .prcm = { .omap2 = { @@ -509,8 +486,6 @@ struct omap_hwmod omap2xxx_wd_timer2_hwmod = { struct omap_hwmod omap2xxx_uart1_hwmod = { .name = "uart1", - .mpu_irqs = omap2_uart1_mpu_irqs, - .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", .flags = DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { @@ -529,8 +504,6 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { struct omap_hwmod omap2xxx_uart2_hwmod = { .name = "uart2", - .mpu_irqs = omap2_uart2_mpu_irqs, - .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", .flags = DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { @@ -549,8 +522,6 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { struct omap_hwmod omap2xxx_uart3_hwmod = { .name = "uart3", - .mpu_irqs = omap2_uart3_mpu_irqs, - .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", .flags = DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { @@ -610,7 +581,7 @@ struct omap_hwmod omap2xxx_dss_dispc_hwmod = { }, }, .flags = HWMOD_NO_IDLEST, - .dev_attr = &omap2_3_dss_dispc_dev_attr + .dev_attr = &omap2_3_dss_dispc_dev_attr, }; static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { @@ -657,7 +628,6 @@ struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr = { struct omap_hwmod omap2xxx_gpio1_hwmod = { .name = "gpio1", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio1_irqs, .main_clk = "gpios_fck", .prcm = { .omap2 = { @@ -676,7 +646,6 @@ struct omap_hwmod omap2xxx_gpio1_hwmod = { struct omap_hwmod omap2xxx_gpio2_hwmod = { .name = "gpio2", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio2_irqs, .main_clk = "gpios_fck", .prcm = { .omap2 = { @@ -695,7 +664,6 @@ struct omap_hwmod omap2xxx_gpio2_hwmod = { struct omap_hwmod omap2xxx_gpio3_hwmod = { .name = "gpio3", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio3_irqs, .main_clk = "gpios_fck", .prcm = { .omap2 = { @@ -714,7 +682,6 @@ struct omap_hwmod omap2xxx_gpio3_hwmod = { struct omap_hwmod omap2xxx_gpio4_hwmod = { .name = "gpio4", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio4_irqs, .main_clk = "gpios_fck", .prcm = { .omap2 = { @@ -736,8 +703,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = { struct omap_hwmod omap2xxx_mcspi1_hwmod = { .name = "mcspi1", - .mpu_irqs = omap2_mcspi1_mpu_irqs, - .sdma_reqs = omap2_mcspi1_sdma_reqs, .main_clk = "mcspi1_fck", .prcm = { .omap2 = { @@ -759,8 +724,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = { struct omap_hwmod omap2xxx_mcspi2_hwmod = { .name = "mcspi2", - .mpu_irqs = omap2_mcspi2_mpu_irqs, - .sdma_reqs = omap2_mcspi2_sdma_reqs, .main_clk = "mcspi2_fck", .prcm = { .omap2 = { @@ -795,15 +758,9 @@ struct omap_hwmod omap2xxx_counter_32k_hwmod = { }; /* gpmc */ -static struct omap_hwmod_irq_info omap2xxx_gpmc_irqs[] = { - { .irq = 20 }, - { .irq = -1 } -}; - struct omap_hwmod omap2xxx_gpmc_hwmod = { .name = "gpmc", .class = &omap2xxx_gpmc_hwmod_class, - .mpu_irqs = omap2xxx_gpmc_irqs, .main_clk = "gpmc_fck", /* * XXX HWMOD_INIT_NO_RESET should not be needed for this IP @@ -840,14 +797,8 @@ static struct omap_hwmod_class omap2_rng_hwmod_class = { .sysc = &omap2_rng_sysc, }; -static struct omap_hwmod_irq_info omap2_rng_mpu_irqs[] = { - { .irq = 52 }, - { .irq = -1 } -}; - struct omap_hwmod omap2xxx_rng_hwmod = { .name = "rng", - .mpu_irqs = omap2_rng_mpu_irqs, .main_clk = "l4_ck", .prcm = { .omap2 = { @@ -884,20 +835,8 @@ static struct omap_hwmod_class omap2xxx_sham_class = { .sysc = &omap2_sham_sysc, }; -static struct omap_hwmod_irq_info omap2_sham_mpu_irqs[] = { - { .irq = 51 + OMAP_INTC_START, }, - { .irq = -1 } -}; - -static struct omap_hwmod_dma_info omap2_sham_sdma_chs[] = { - { .name = "rx", .dma_req = 13 }, - { .dma_req = -1 } -}; - struct omap_hwmod omap2xxx_sham_hwmod = { .name = "sham", - .mpu_irqs = omap2_sham_mpu_irqs, - .sdma_reqs = omap2_sham_sdma_chs, .main_clk = "l4_ck", .prcm = { .omap2 = { @@ -927,15 +866,8 @@ static struct omap_hwmod_class omap2xxx_aes_class = { .sysc = &omap2_aes_sysc, }; -static struct omap_hwmod_dma_info omap2_aes_sdma_chs[] = { - { .name = "tx", .dma_req = 9 }, - { .name = "rx", .dma_req = 10 }, - { .dma_req = -1 } -}; - struct omap_hwmod omap2xxx_aes_hwmod = { .name = "aes", - .sdma_reqs = omap2_aes_sdma_chs, .main_clk = "l4_ck", .prcm = { .omap2 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index 6e04ff7065e1..2c38c6b0ee03 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -18,9 +18,6 @@ #include "common.h" #include "display.h" -/* Common address space across OMAP2xxx */ -extern struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[]; - /* Common address space across OMAP2xxx/3xxx */ extern struct omap_hwmod_addr_space omap2_i2c1_addr_space[]; extern struct omap_hwmod_addr_space omap2_i2c2_addr_space[]; @@ -41,8 +38,6 @@ extern struct omap_hwmod_addr_space omap2_mcbsp1_addrs[]; extern struct omap_hwmod_addr_space omap2_hdq1w_addr_space[]; /* Common IP block data across OMAP2xxx */ -extern struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[]; -extern struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[]; extern struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr; extern struct omap_hwmod omap2xxx_l3_main_hwmod; extern struct omap_hwmod omap2xxx_l4_core_hwmod; diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 10c71450cf63..5aaf720211f4 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ #include <linux/clk.h> +#include <linux/davinci_emac.h> #include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> @@ -16,6 +17,7 @@ #include <linux/platform_data/pinctrl-single.h> +#include "am35xx.h" #include "common.h" #include "common-board-devices.h" #include "dss-common.h" @@ -26,6 +28,9 @@ struct pdata_init { void (*fn)(void); }; +struct of_dev_auxdata omap_auxdata_lookup[]; +static struct twl4030_gpio_platform_data twl_gpio_auxdata; + /* * Create alias for USB host PHY clock. * Remove this when clock phandle can be provided via DT @@ -68,6 +73,15 @@ static inline void legacy_init_wl12xx(unsigned ref_clock, } #endif +#ifdef CONFIG_MACH_NOKIA_N8X0 +static void __init omap2420_n8x0_legacy_init(void) +{ + omap_auxdata_lookup[0].platform_data = n8x0_legacy_init(); +} +#else +#define omap2420_n8x0_legacy_init NULL +#endif + #ifdef CONFIG_ARCH_OMAP3 static void __init hsmmc2_internal_input_clk(void) { @@ -92,6 +106,42 @@ static void __init omap3_zoom_legacy_init(void) { legacy_init_wl12xx(WL12XX_REFCLOCK_26, 0, 162); } + +static void am35xx_enable_emac_int(void) +{ + u32 v; + + v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR | + AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR); + omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR); + omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */ +} + +static void am35xx_disable_emac_int(void) +{ + u32 v; + + v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR); + omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR); + omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */ +} + +static struct emac_platform_data am35xx_emac_pdata = { + .interrupt_enable = am35xx_enable_emac_int, + .interrupt_disable = am35xx_disable_emac_int, +}; + +static void __init am3517_evm_legacy_init(void) +{ + u32 v; + + v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); + v &= ~AM35XX_CPGMACSS_SW_RST; + omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET); + omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */ +} #endif /* CONFIG_ARCH_OMAP3 */ #ifdef CONFIG_ARCH_OMAP4 @@ -125,10 +175,45 @@ void omap_pcs_legacy_init(int irq, void (*rearm)(void)) pcs_pdata.rearm = rearm; } +/* + * GPIOs for TWL are initialized by the I2C bus and need custom + * handing until DSS has device tree bindings. + */ +void omap_auxdata_legacy_init(struct device *dev) +{ + if (dev->platform_data) + return; + + if (strcmp("twl4030-gpio", dev_name(dev))) + return; + + dev->platform_data = &twl_gpio_auxdata; +} + +/* + * Few boards still need auxdata populated before we populate + * the dev entries in of_platform_populate(). + */ +static struct pdata_init auxdata_quirks[] __initdata = { +#ifdef CONFIG_SOC_OMAP2420 + { "nokia,n800", omap2420_n8x0_legacy_init, }, + { "nokia,n810", omap2420_n8x0_legacy_init, }, + { "nokia,n810-wimax", omap2420_n8x0_legacy_init, }, +#endif + { /* sentinel */ }, +}; + struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { +#ifdef CONFIG_MACH_NOKIA_N8X0 + OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL), +#endif #ifdef CONFIG_ARCH_OMAP3 OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata), OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata), + /* Only on am3517 */ + OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL), + OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0", + &am35xx_emac_pdata), #endif #ifdef CONFIG_ARCH_OMAP4 OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata), @@ -137,13 +222,19 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { { /* sentinel */ }, }; +/* + * Few boards still need to initialize some legacy devices with + * platform data until the drivers support device tree. + */ static struct pdata_init pdata_quirks[] __initdata = { #ifdef CONFIG_ARCH_OMAP3 + { "nokia,omap3-n900", hsmmc2_internal_input_clk, }, { "nokia,omap3-n9", hsmmc2_internal_input_clk, }, { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, { "isee,omap3-igep0020", omap3_igep0020_legacy_init, }, { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,omap3-zoom3", omap3_zoom_legacy_init, }, + { "ti,am3517-evm", am3517_evm_legacy_init, }, #endif #ifdef CONFIG_ARCH_OMAP4 { "ti,omap4-sdp", omap4_sdp_legacy_init, }, @@ -155,14 +246,8 @@ static struct pdata_init pdata_quirks[] __initdata = { { /* sentinel */ }, }; -void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table) +static void pdata_quirks_check(struct pdata_init *quirks) { - struct pdata_init *quirks = pdata_quirks; - - omap_sdrc_init(NULL, NULL); - of_platform_populate(NULL, omap_dt_match_table, - omap_auxdata_lookup, NULL); - while (quirks->compatible) { if (of_machine_is_compatible(quirks->compatible)) { if (quirks->fn) @@ -172,3 +257,12 @@ void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table) quirks++; } } + +void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table) +{ + omap_sdrc_init(NULL, NULL); + pdata_quirks_check(auxdata_quirks); + of_platform_populate(NULL, omap_dt_match_table, + omap_auxdata_lookup, NULL); + pdata_quirks_check(pdata_quirks); +} diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 93b80e5da8d4..1f3770a8a728 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -120,7 +120,7 @@ static void omap3_save_secure_ram_context(void) * will hang the system. */ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); - ret = _omap_save_secure_sram((u32 *) + ret = _omap_save_secure_sram((u32 *)(unsigned long) __pa(omap3_secure_ram_storage)); pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index e233dfcbc186..93a2a6e4260f 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -128,7 +128,8 @@ skip_voltdm: for (i = 0; i < pwrdm->banks; i++) pwrdm->ret_mem_off_counter[i] = 0; - arch_pwrdm->pwrdm_wait_transition(pwrdm); + if (arch_pwrdm && arch_pwrdm->pwrdm_wait_transition) + arch_pwrdm->pwrdm_wait_transition(pwrdm); pwrdm->state = pwrdm_read_pwrst(pwrdm); pwrdm->state_counter[pwrdm->state] = 1; diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h index 7a976065e138..8d95aa543ef5 100644 --- a/arch/arm/mach-omap2/prm44xx_54xx.h +++ b/arch/arm/mach-omap2/prm44xx_54xx.h @@ -43,7 +43,7 @@ extern void omap4_prm_vcvp_write(u32 val, u8 offset); extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) void omap44xx_prm_reconfigure_io_chain(void); #else static inline void omap44xx_prm_reconfigure_io_chain(void) diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 037100a1563a..aee77f06f887 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -10,6 +10,7 @@ config ARCH_SOCFPGA select GENERIC_CLOCKEVENTS select GPIO_PL061 if GPIOLIB select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP select HAVE_SMP select MFD_SYSCON select SPARSE_IRQ diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index d4639c506622..9a4e910c3796 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -209,13 +209,3 @@ void __init tegra_init_fuse(void) tegra_sku_id, tegra_cpu_process_id, tegra_core_process_id); } - -unsigned long long tegra_chip_uid(void) -{ - unsigned long long lo, hi; - - lo = tegra_fuse_readl(FUSE_UID_LOW); - hi = tegra_fuse_readl(FUSE_UID_HIGH); - return (hi << 32ull) | lo; -} -EXPORT_SYMBOL(tegra_chip_uid); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 2e85c1e72535..12c7e5c03ea4 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -140,6 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA bindings. */ + OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, "ux500-msp-i2s.0", &msp0_platform_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index 033d34dcbd3f..c26ef5b92ca7 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -53,6 +53,11 @@ #define A15_BX_ADDR0 0x68 #define A7_BX_ADDR0 0x78 +/* SPC CPU/cluster reset statue */ +#define STANDBYWFI_STAT 0x3c +#define STANDBYWFI_STAT_A15_CPU_MASK(cpu) (1 << (cpu)) +#define STANDBYWFI_STAT_A7_CPU_MASK(cpu) (1 << (3 + (cpu))) + /* SPC system config interface registers */ #define SYSCFG_WDATA 0x70 #define SYSCFG_RDATA 0x74 @@ -213,6 +218,41 @@ void ve_spc_powerdown(u32 cluster, bool enable) writel_relaxed(enable, info->baseaddr + pwdrn_reg); } +static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster) +{ + return cluster_is_a15(cluster) ? + STANDBYWFI_STAT_A15_CPU_MASK(cpu) + : STANDBYWFI_STAT_A7_CPU_MASK(cpu); +} + +/** + * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster) + * + * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster + * @cluster: mpidr[15:8] bitfield describing cluster affinity level + * + * @return: non-zero if and only if the specified CPU is in WFI + * + * Take care when interpreting the result of this function: a CPU might + * be in WFI temporarily due to idle, and is not necessarily safely + * parked. + */ +int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster) +{ + int ret; + u32 mask = standbywfi_cpu_mask(cpu, cluster); + + if (cluster >= MAX_CLUSTERS) + return 1; + + ret = readl_relaxed(info->baseaddr + STANDBYWFI_STAT); + + pr_debug("%s: PCFGREG[0x%X] = 0x%08X, mask = 0x%X\n", + __func__, STANDBYWFI_STAT, ret, mask); + + return ret & mask; +} + static int ve_spc_get_performance(int cluster, u32 *freq) { struct ve_spc_opp *opps = info->opps[cluster]; diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h index dbd44c3720f9..793d065243b9 100644 --- a/arch/arm/mach-vexpress/spc.h +++ b/arch/arm/mach-vexpress/spc.h @@ -20,5 +20,6 @@ void ve_spc_global_wakeup_irq(bool set); void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set); void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr); void ve_spc_powerdown(u32 cluster, bool enable); +int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster); #endif diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c index 05a364c5077a..29e7785a54bc 100644 --- a/arch/arm/mach-vexpress/tc2_pm.c +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ +#include <linux/delay.h> #include <linux/init.h> #include <linux/io.h> #include <linux/kernel.h> @@ -32,11 +33,17 @@ #include "spc.h" /* SCC conf registers */ +#define RESET_CTRL 0x018 +#define RESET_A15_NCORERESET(cpu) (1 << (2 + (cpu))) +#define RESET_A7_NCORERESET(cpu) (1 << (16 + (cpu))) + #define A15_CONF 0x400 #define A7_CONF 0x500 #define SYS_INFO 0x700 #define SPC_BASE 0xb00 +static void __iomem *scc; + /* * We can't use regular spinlocks. In the switcher case, it is possible * for an outbound CPU to call power_down() after its inbound counterpart @@ -190,6 +197,55 @@ static void tc2_pm_power_down(void) tc2_pm_down(0); } +static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster) +{ + u32 mask = cluster ? + RESET_A7_NCORERESET(cpu) + : RESET_A15_NCORERESET(cpu); + + return !(readl_relaxed(scc + RESET_CTRL) & mask); +} + +#define POLL_MSEC 10 +#define TIMEOUT_MSEC 1000 + +static int tc2_pm_power_down_finish(unsigned int cpu, unsigned int cluster) +{ + unsigned tries; + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER); + + for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) { + /* + * Only examine the hardware state if the target CPU has + * caught up at least as far as tc2_pm_down(): + */ + if (ACCESS_ONCE(tc2_pm_use_count[cpu][cluster]) == 0) { + pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n", + __func__, cpu, cluster, + readl_relaxed(scc + RESET_CTRL)); + + /* + * We need the CPU to reach WFI, but the power + * controller may put the cluster in reset and + * power it off as soon as that happens, before + * we have a chance to see STANDBYWFI. + * + * So we need to check for both conditions: + */ + if (tc2_core_in_reset(cpu, cluster) || + ve_spc_cpu_in_wfi(cpu, cluster)) + return 0; /* success: the CPU is halted */ + } + + /* Otherwise, wait and retry: */ + msleep(POLL_MSEC); + } + + return -ETIMEDOUT; /* timeout */ +} + static void tc2_pm_suspend(u64 residency) { unsigned int mpidr, cpu, cluster; @@ -232,10 +288,11 @@ static void tc2_pm_powered_up(void) } static const struct mcpm_platform_ops tc2_pm_power_ops = { - .power_up = tc2_pm_power_up, - .power_down = tc2_pm_power_down, - .suspend = tc2_pm_suspend, - .powered_up = tc2_pm_powered_up, + .power_up = tc2_pm_power_up, + .power_down = tc2_pm_power_down, + .power_down_finish = tc2_pm_power_down_finish, + .suspend = tc2_pm_suspend, + .powered_up = tc2_pm_powered_up, }; static bool __init tc2_pm_usage_count_init(void) @@ -269,7 +326,6 @@ static void __naked tc2_pm_power_up_setup(unsigned int affinity_level) static int __init tc2_pm_init(void) { int ret, irq; - void __iomem *scc; u32 a15_cluster_id, a7_cluster_id, sys_info; struct device_node *np; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 79f8b39801a8..f6b6bfa88ecf 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -9,6 +9,7 @@ * * DMA uncached mapping support. */ +#include <linux/bootmem.h> #include <linux/module.h> #include <linux/mm.h> #include <linux/gfp.h> @@ -162,6 +163,8 @@ static u64 get_coherent_dma_mask(struct device *dev) u64 mask = (u64)DMA_BIT_MASK(32); if (dev) { + unsigned long max_dma_pfn; + mask = dev->coherent_dma_mask; /* @@ -173,6 +176,8 @@ static u64 get_coherent_dma_mask(struct device *dev) return 0; } + max_dma_pfn = min(max_pfn, arm_dma_pfn_limit); + /* * If the mask allows for more memory than we can address, * and we actually have that much memory, then fail the @@ -180,7 +185,7 @@ static u64 get_coherent_dma_mask(struct device *dev) */ if (sizeof(mask) != sizeof(dma_addr_t) && mask > (dma_addr_t)~0 && - dma_to_pfn(dev, ~0) > arm_dma_pfn_limit) { + dma_to_pfn(dev, ~0) > max_dma_pfn) { dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n", mask); dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n"); @@ -192,7 +197,7 @@ static u64 get_coherent_dma_mask(struct device *dev) * fits within the allowable addresses which we can * allocate. */ - if (dma_to_pfn(dev, mask) < arm_dma_pfn_limit) { + if (dma_to_pfn(dev, mask) < max_dma_pfn) { dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n", mask, dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1, diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index d27158c38eb0..5e85ed371364 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -146,7 +146,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, info.flags = VM_UNMAPPED_AREA_TOPDOWN; info.length = len; - info.low_limit = PAGE_SIZE; + info.low_limit = FIRST_USER_ADDRESS; info.high_limit = mm->mmap_base; info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; info.align_offset = pgoff << PAGE_SHIFT; diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index 0acb089d0f70..1046b373d1ae 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -87,7 +87,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm) init_pud = pud_offset(init_pgd, 0); init_pmd = pmd_offset(init_pud, 0); init_pte = pte_offset_map(init_pmd, 0); - set_pte_ext(new_pte, *init_pte, 0); + set_pte_ext(new_pte + 0, init_pte[0], 0); + set_pte_ext(new_pte + 1, init_pte[1], 0); pte_unmap(init_pte); pte_unmap(new_pte); } diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index fb92abb91628..2861b155485a 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -336,8 +336,11 @@ static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer) if (timer->posted) return; - if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) + if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) { + timer->posted = OMAP_TIMER_NONPOSTED; + __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0); return; + } __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, OMAP_TIMER_CTRL_POSTED, 0); diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index 23732cdff551..b31ee1b275b0 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -25,8 +25,9 @@ struct xen_p2m_entry { struct rb_node rbnode_phys; }; -rwlock_t p2m_lock; +static rwlock_t p2m_lock; struct rb_root phys_to_mach = RB_ROOT; +EXPORT_SYMBOL_GPL(phys_to_mach); static struct rb_root mach_to_phys = RB_ROOT; static int xen_add_phys_to_mach_entry(struct xen_p2m_entry *new) @@ -200,7 +201,7 @@ bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn) } EXPORT_SYMBOL_GPL(__set_phys_to_machine); -int p2m_init(void) +static int p2m_init(void) { rwlock_init(&p2m_lock); return 0; |
