diff options
Diffstat (limited to 'arch/arm')
194 files changed, 3716 insertions, 1949 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 071dce78959a..87b63fde06d7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -165,12 +165,9 @@ config TRACE_IRQFLAGS_SUPPORT bool default y -config RWSEM_GENERIC_SPINLOCK - bool - default y - config RWSEM_XCHGADD_ALGORITHM bool + default y config ARCH_HAS_ILOG2_U32 bool @@ -480,6 +477,7 @@ config ARCH_IOP13XX select PCI select PLAT_IOP select VMSPLIT_1G + select SPARSE_IRQ help Support for Intel's IOP13XX (XScale) family of processors. @@ -1088,11 +1086,6 @@ source "arch/arm/firmware/Kconfig" source arch/arm/mm/Kconfig -config ARM_NR_BANKS - int - default 16 if ARCH_EP93XX - default 8 - config IWMMXT bool "Enable iWMMXt support" depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B @@ -1213,19 +1206,6 @@ config ARM_ERRATA_742231 register of the Cortex-A9 which reduces the linefill issuing capabilities of the processor. -config PL310_ERRATA_588369 - bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" - depends on CACHE_L2X0 - help - The PL310 L2 cache controller implements three types of Clean & - Invalidate maintenance operations: by Physical Address - (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC). - They are architecturally defined to behave as the execution of a - clean operation followed immediately by an invalidate operation, - both performing to the same memory location. This functionality - is not correctly implemented in PL310 as clean lines are not - invalidated as a result of these operations. - config ARM_ERRATA_643719 bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" depends on CPU_V7 && SMP @@ -1248,17 +1228,6 @@ config ARM_ERRATA_720789 tables. The workaround changes the TLB flushing routines to invalidate entries regardless of the ASID. -config PL310_ERRATA_727915 - bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" - depends on CACHE_L2X0 - help - PL310 implements the Clean & Invalidate by Way L2 cache maintenance - operation (offset 0x7FC). This operation runs in background so that - PL310 can handle normal accesses while it is in progress. Under very - rare circumstances, due to this erratum, write data can be lost when - PL310 treats a cacheable write transaction during a Clean & - Invalidate by Way operation. - config ARM_ERRATA_743622 bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" depends on CPU_V7 @@ -1284,21 +1253,6 @@ config ARM_ERRATA_751472 operation is received by a CPU before the ICIALLUIS has completed, potentially leading to corrupted entries in the cache or TLB. -config PL310_ERRATA_753970 - bool "PL310 errata: cache sync operation may be faulty" - depends on CACHE_PL310 - help - This option enables the workaround for the 753970 PL310 (r3p0) erratum. - - Under some condition the effect of cache sync operation on - the store buffer still remains when the operation completes. - This means that the store buffer is always asked to drain and - this prevents it from merging any further writes. The workaround - is to replace the normal offset of cache sync operation (0x730) - by another offset targeting an unmapped PL310 register 0x740. - This has the same effect as the cache sync operation: store buffer - drain and waiting for all buffers empty. - config ARM_ERRATA_754322 bool "ARM errata: possible faulty MMU translations following an ASID switch" depends on CPU_V7 @@ -1347,18 +1301,6 @@ config ARM_ERRATA_764369 relevant cache maintenance functions and sets a specific bit in the diagnostic control register of the SCU. -config PL310_ERRATA_769419 - bool "PL310 errata: no automatic Store Buffer drain" - depends on CACHE_L2X0 - help - On revisions of the PL310 prior to r3p2, the Store Buffer does - not automatically drain. This can cause normal, non-cacheable - writes to be retained when the memory system is idle, leading - to suboptimal I/O performance for drivers using coherent DMA. - This option adds a write barrier to the cpu_idle loop so that, - on systems with an outer cache, the store buffer is drained - explicitly. - config ARM_ERRATA_775420 bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" depends on CPU_V7 @@ -2278,6 +2220,11 @@ config ARCH_SUSPEND_POSSIBLE config ARM_CPU_SUSPEND def_bool PM_SLEEP +config ARCH_HIBERNATION_POSSIBLE + bool + depends on MMU + default y if ARCH_SUSPEND_POSSIBLE + endmenu source "net/Kconfig" diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c index d1153c8a765a..9448aa0c6686 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -7,6 +7,8 @@ #define do_extend_cmdline 0 #endif +#define NR_BANKS 16 + static int node_offset(void *fdt, const char *node_path) { int offset = fdt_path_offset(fdt, node_path); diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 794c73e5c4e4..db464d7eaca8 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -857,6 +857,35 @@ ti,hwmods = "hdq1w"; status = "disabled"; }; + + dss: dss@4832a000 { + compatible = "ti,omap3-dss"; + reg = <0x4832a000 0x200>; + status = "disabled"; + ti,hwmods = "dss_core"; + clocks = <&disp_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dispc@4832a400 { + compatible = "ti,omap3-dispc"; + reg = <0x4832a400 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "dss_dispc"; + clocks = <&disp_clk>; + clock-names = "fck"; + }; + + rfbi: rfbi@4832a800 { + compatible = "ti,omap3-rfbi"; + reg = <0x4832a800 0x100>; + ti,hwmods = "dss_rfbi"; + clocks = <&disp_clk>; + clock-names = "fck"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index c25d15837ce9..003766c47bbf 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -19,6 +19,10 @@ model = "TI AM437x GP EVM"; compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43"; + aliases { + display0 = &lcd0; + }; + vmmcsd_fixed: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -64,6 +68,44 @@ 0x02000069 /* LEFT */ 0x0201006c>; /* DOWN */ }; + + lcd0: display { + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + /* + * SelLCDorHDMI, LOW to select HDMI. This is not really the + * panel's enable GPIO, but we don't have HDMI driver support nor + * support to switch between two displays, so using this gpio as + * panel's enable should be safe. + */ + enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <33000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <210>; + hback-porch = <16>; + hsync-len = <30>; + vback-porch = <10>; + vfront-porch = <22>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; }; &am43xx_pinmux { @@ -171,6 +213,47 @@ 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ >; }; + + dss_pins: dss_pins { + pinctrl-single,pins = < + 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ + 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ + 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ + 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ + 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ + 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ + 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ + 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + + >; + }; + + lcd_pins: lcd_pins { + pinctrl-single,pins = < + /* GPIO 5_8 to select LCD / HDMI */ + 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; }; &i2c0 { @@ -359,3 +442,17 @@ }; }; }; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_pins>; + + port { + dpi_out: endpoint@0 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index ad362c50e32e..19f1f7e87597 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -19,6 +19,10 @@ model = "TI AM43x EPOS EVM"; compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43"; + aliases { + display0 = &lcd0; + }; + vmmcsd_fixed: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -27,6 +31,44 @@ enable-active-high; }; + lcd0: display { + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + /* + * SelLCDorHDMI, LOW to select HDMI. This is not really the + * panel's enable GPIO, but we don't have HDMI driver support nor + * support to switch between two displays, so using this gpio as + * panel's enable should be safe. + */ + enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <33000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <210>; + hback-porch = <16>; + hsync-len = <30>; + vback-porch = <10>; + vfront-porch = <22>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + am43xx_pinmux: pinmux@44e10800 { cpsw_default: cpsw_default { pinctrl-single,pins = < @@ -161,6 +203,46 @@ 0x234 (PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */ >; }; + + dss_pins: dss_pins { + pinctrl-single,pins = < + 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ + 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ + 0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ + 0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ + 0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ + 0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ + 0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ + 0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + >; + }; + + lcd_pins: lcd_pins { + pinctrl-single,pins = < + /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */ + 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; }; matrix_keypad: matrix_keypad@0 { @@ -468,3 +550,17 @@ pinctrl-names = "default"; pinctrl-0 = <&hdq_pins>; }; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_pins>; + + port { + dpi_out: endpoint@0 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 08a44d41b672..8b366822bb43 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -14,6 +14,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include "dt-bindings/clock/bcm21664.h" + #include "skeleton.dtsi" / { @@ -43,7 +45,7 @@ compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e000000 0x118>; - clocks = <&uartb_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -53,7 +55,7 @@ compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e001000 0x118>; - clocks = <&uartb2_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -63,7 +65,7 @@ compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e002000 0x118>; - clocks = <&uartb3_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -85,7 +87,7 @@ compatible = "brcm,kona-timer"; reg = <0x35006000 0x1c>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&hub_timer_clk>; + clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; }; gpio: gpio@35003000 { @@ -106,7 +108,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f180000 0x801c>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio1_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; status = "disabled"; }; @@ -114,7 +116,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f190000 0x801c>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio2_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; status = "disabled"; }; @@ -122,7 +124,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f1a0000 0x801c>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio3_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; status = "disabled"; }; @@ -130,7 +132,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f1b0000 0x801c>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio4_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; status = "disabled"; }; @@ -140,7 +142,7 @@ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc1_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; status = "disabled"; }; @@ -150,7 +152,7 @@ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc2_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; status = "disabled"; }; @@ -160,7 +162,7 @@ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc3_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; status = "disabled"; }; @@ -170,105 +172,149 @@ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc4_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; status = "disabled"; }; clocks { - bsc1_clk: bsc1 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; - #clock-cells = <0>; - }; + #address-cells = <1>; + #size-cells = <1>; + ranges; - bsc2_clk: bsc2 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + /* + * Fixed clocks are defined before CCUs whose + * clocks may depend on them. + */ + + ref_32k_clk: ref_32k { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; }; - bsc3_clk: bsc3 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + bbl_32k_clk: bbl_32k { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; }; - bsc4_clk: bsc4 { + ref_13m_clk: ref_13m { + #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <13000000>; - #clock-cells = <0>; }; - pmu_bsc_clk: pmu_bsc { + var_13m_clk: var_13m { + #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <13000000>; - #clock-cells = <0>; }; - hub_timer_clk: hub_timer { - compatible = "fixed-clock"; - clock-frequency = <32768>; + dft_19_5m_clk: dft_19_5m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19500000>; }; - pwm_clk: pwm { + ref_crystal_clk: ref_crystal { + #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <26000000>; - #clock-cells = <0>; }; - sdio1_clk: sdio1 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + ref_52m_clk: ref_52m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; }; - sdio2_clk: sdio2 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + var_52m_clk: var_52m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; }; - sdio3_clk: sdio3 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + usb_otg_ahb_clk: usb_otg_ahb { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; }; - sdio4_clk: sdio4 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + ref_96m_clk: ref_96m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; }; - tmon_1m_clk: tmon_1m { - compatible = "fixed-clock"; - clock-frequency = <1000000>; + var_96m_clk: var_96m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; }; - uartb_clk: uartb { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + ref_104m_clk: ref_104m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; }; - uartb2_clk: uartb2 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + var_104m_clk: var_104m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; }; - uartb3_clk: uartb3 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + ref_156m_clk: ref_156m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; }; - usb_otg_ahb_clk: usb_otg_ahb { - compatible = "fixed-clock"; - clock-frequency = <52000000>; + var_156m_clk: var_156m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + root_ccu: root_ccu { + compatible = BCM21664_DT_ROOT_CCU_COMPAT; + reg = <0x35001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "frac_1m"; + }; + + aon_ccu: aon_ccu { + compatible = BCM21664_DT_AON_CCU_COMPAT; + reg = <0x35002000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "hub_timer"; + }; + + master_ccu: master_ccu { + compatible = BCM21664_DT_MASTER_CCU_COMPAT; + reg = <0x3f001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "sdio1", + "sdio2", + "sdio3", + "sdio4", + "sdio1_sleep", + "sdio2_sleep", + "sdio3_sleep", + "sdio4_sleep"; + }; + + slave_ccu: slave_ccu { + compatible = BCM21664_DT_SLAVE_CCU_COMPAT; + reg = <0x3e011000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "uartb", + "uartb2", + "uartb3", + "bsc1", + "bsc2", + "bsc3", + "bsc4"; }; }; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index d9f99e7deb83..c1414cb81fd4 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -66,9 +66,21 @@ ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; + pllctrl: pll-controller@02310000 { + compatible = "ti,keystone-pllctrl", "syscon"; + reg = <0x02310000 0x200>; + }; + + devctrl: device-state-control@02620000 { + compatible = "ti,keystone-devctrl", "syscon"; + reg = <0x02620000 0x1000>; + }; + rstctrl: reset-controller { compatible = "ti,keystone-reset"; - reg = <0x023100e8 4>; /* pll reset control reg */ + ti,syscon-pll = <&pllctrl 0xe4>; + ti,syscon-dev = <&devctrl 0x328>; + ti,wdt-list = <0>; }; /include/ "keystone-clocks.dtsi" diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi index 0c9647d28765..fb354225740a 100644 --- a/arch/arm/boot/dts/marco.dtsi +++ b/arch/arm/boot/dts/marco.dtsi @@ -36,7 +36,7 @@ ranges = <0x40000000 0x40000000 0xa0000000>; l2-cache-controller@c0030000 { - compatible = "sirf,marco-pl310-cache", "arm,pl310-cache"; + compatible = "arm,pl310-cache"; reg = <0xc0030000 0x1000>; interrupts = <0 59 0>; arm,tag-latency = <1 1 1>; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 9cba94bed7ad..a8bd4349c7d2 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -26,7 +26,44 @@ }; }; +&dss { + pinctrl-names = "default"; + pinctrl-0 = < + &dss_dpi_pins1 + &dss_dpi_pins2 + >; +}; + &omap3_pmx_core { + dss_dpi_pins1: pinmux_dss_dpi_pins2 { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */ + >; + }; + mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ @@ -75,6 +112,19 @@ }; }; +&omap3_pmx_wkup { + dss_dpi_pins2: pinmux_dss_dpi_pins1 { + pinctrl-single,pins = < + 0x0a (PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ + 0x0c (PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ + 0x10 (PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ + 0x12 (PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ + 0x14 (PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ + 0x16 (PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ + >; + }; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 3007e79c9cd6..8ae8f007c8ad 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -44,6 +44,11 @@ #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" +#include "omap3-panel-sharp-ls037v7dw01.dtsi" + +&backlight0 { + gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; +}; &i2c2 { clock-frequency = <400000>; @@ -61,6 +66,27 @@ }; }; +&lcd_3v3 { + gpio = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */ + enable-active-low; +}; + +&lcd0 { + enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */ + reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */ + mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */ + &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */ + &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */ +}; + +&mcspi1 { + tsc2046@0 { + interrupt-parent = <&gpio6>; + interrupts = <15 0>; /* gpio175 */ + pendown-gpio = <&gpio6 15 0>; + }; +}; + &mmc1 { vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts index f8ad125fa46f..021311f7964b 100644 --- a/arch/arm/boot/dts/omap3-gta04.dts +++ b/arch/arm/boot/dts/omap3-gta04.dts @@ -44,6 +44,36 @@ ti,mcbsp = <&mcbsp2>; ti,codec = <&twl_audio>; }; + + spi_lcd { + compatible = "spi-gpio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_gpio_pins>; + + gpio-sck = <&gpio1 12 0>; + gpio-miso = <&gpio1 18 0>; + gpio-mosi = <&gpio1 20 0>; + cs-gpios = <&gpio1 19 0>; + num-chipselects = <1>; + + /* lcd panel */ + lcd: td028ttec1@0 { + compatible = "toppoly,td028ttec1"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + + label = "lcd"; + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; }; &omap3_pmx_core { @@ -78,6 +108,47 @@ 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ >; }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + spi_gpio_pins: spi_gpio_pinmux { + pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */ + 0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */ + 0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */ + 0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */ + >; + }; }; &i2c1 { @@ -219,3 +290,22 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3150000>; }; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = < &dss_dpi_pins >; + + status = "okay"; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 476ff158ddb3..af272c156e21 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -164,6 +164,11 @@ #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" +#include "omap3-panel-sharp-ls037v7dw01.dtsi" + +&backlight0 { + gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; +}; &i2c2 { clock-frequency = <400000>; @@ -173,6 +178,25 @@ clock-frequency = <400000>; }; +/* tps61130rsa enabled by twl4030 regen */ +&lcd_3v3 { + regulator-always-on; +}; + +&lcd0 { + enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>; /* lcd INI */ + reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; /* gpio55, lcd RESB */ + mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio56, lcd MO */ +}; + +&mcspi1 { + tsc2046@0 { + interrupt-parent = <&gpio2>; + interrupts = <22 0>; /* gpio54 */ + pendown-gpio = <&gpio2 22 0>; + }; +}; + &mmc1 { /* See 35xx errata 2.1.1.128 in SPRZ278F */ compatible = "ti,omap3-pre-es3-hsmmc"; @@ -251,8 +275,3 @@ /* Needed for ads7846 */ regulator-name = "vcc"; }; - -&vpll2 { - /* Needed for DSS */ - regulator-name = "vdds_dsi"; -}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 059a8ff1e6ac..ae8ae3f4f9bf 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -651,9 +651,24 @@ * Also... order in the device tree actually matters here. */ tsc2005@0 { - compatible = "tsc2005"; + compatible = "ti,tsc2005"; spi-max-frequency = <6000000>; reg = <0>; + + vio-supply = <&vio>; + + reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */ + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-max-x = <4096>; + touchscreen-max-y = <4096>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; }; acx565akm@2 { diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi index 19d64864a109..7aae8fb82c1f 100644 --- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-lcd35.dtsi" #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi index 19de6ff79686..17b82f82638a 100644 --- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-lcd43.dtsi" #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi new file mode 100644 index 000000000000..802f704f67e5 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi @@ -0,0 +1,111 @@ +/* + * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * DVI output for some Gumstix Overo boards (Tobi and Summit) + */ + +&omap3_pmx_core { + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &dvi0; + }; + + tfp410: encoder@0 { + compatible = "ti,tfp410"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint@0 { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint@0 { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector@0 { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + ddc-i2c-bus = <&i2c3>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; +}; + diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi new file mode 100644 index 000000000000..233c69e50ae3 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43) + */ + +&omap3_pmx_core { + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + lb035_pins: pinmux_lb035_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4) /* uart2_cts.gpio_144 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4) /* uart2_rts.gpio_145 */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + ads7846_pins: pinmux_ads7846_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4) /* csi2_dx1.gpio_114 */ + >; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + ads7846reg: ads7846-reg { + compatible = "regulator-fixed"; + regulator-name = "ads7846-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + backlight { + compatible = "gpio-backlight"; + + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* gpio_145 */ + + default-on; + }; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + + lcd0: display@0 { + compatible = "lgphilips,lb035q02"; + label = "lcd"; + + reg = <1>; /* CS1 */ + spi-max-frequency = <10000000>; + spi-cpol; + spi-cpha; + + pinctrl-names = "default"; + pinctrl-0 = <&lb035_pins>; + enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + /* touch controller */ + ads7846@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ads7846_pins>; + + compatible = "ti,ads7846"; + vcc-supply = <&ads7846reg>; + + reg = <0>; /* CS0 */ + spi-max-frequency = <1500000>; + + interrupt-parent = <&gpio4>; + interrupts = <18 0>; /* gpio_114 */ + pendown-gpio = <&gpio4 18 0>; + + ti,x-min = /bits/ 16 <0x0>; + ti,x-max = /bits/ 16 <0x0fff>; + ti,y-min = /bits/ 16 <0x0>; + ti,y-max = /bits/ 16 <0x0fff>; + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + + linux,wakeup; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi new file mode 100644 index 000000000000..f5395b7da912 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43) + */ + +&omap3_pmx_core { + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + lte430_pins: pinmux_lte430_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4) /* uart2_cts.gpio_144 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4) /* uart2_rts.gpio_145 */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + ads7846_pins: pinmux_ads7846_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4) /* csi2_dx1.gpio_114 */ + >; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + lcd0: display@0 { + compatible = "samsung,lte430wq-f0c", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <<e430_pins>; + enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <9200000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <4>; + hsync-len = <41>; + vback-porch = <2>; + vfront-porch = <4>; + vsync-len = <10>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + ads7846reg: ads7846-reg { + compatible = "regulator-fixed"; + regulator-name = "ads7846-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + backlight { + compatible = "gpio-backlight"; + + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* gpio_145 */ + + default-on; + }; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + + /* touch controller */ + ads7846@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ads7846_pins>; + + compatible = "ti,ads7846"; + vcc-supply = <&ads7846reg>; + + reg = <0>; /* CS0 */ + spi-max-frequency = <1500000>; + + interrupt-parent = <&gpio4>; + interrupts = <18 0>; /* gpio_114 */ + pendown-gpio = <&gpio4 18 0>; + + ti,x-min = /bits/ 16 <0x0>; + ti,x-max = /bits/ 16 <0x0fff>; + ti,y-min = /bits/ 16 <0x0>; + ti,y-max = /bits/ 16 <0x0fff>; + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + + linux,wakeup; + }; +}; + diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi index 5e848c26986b..49d2254a99b0 100644 --- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-lcd43.dtsi" #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi index abea232825b9..087aedf5b902 100644 --- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-lcd43.dtsi" #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi index 999d1cd4a09f..0ac97ba98549 100644 --- a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-dvi.dtsi" / { leds { diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 13df50b39442..9e24b6a1d07b 100644 --- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-dvi.dtsi" / { leds { diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi new file mode 100644 index 000000000000..f4b1a61853e3 --- /dev/null +++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi @@ -0,0 +1,71 @@ +/* + * Common file for omap dpi panels with QVGA and reset pins + * + * Note that the board specifc DTS file needs to specify + * at minimum the GPIO enable-gpios for display, and + * gpios for gpio-backlight. + */ + +/ { + aliases { + display0 = &lcd0; + }; + + backlight0: backlight { + compatible = "gpio-backlight"; + default-on; + }; + + /* 3.3V GPIO controlled regulator for LCD_ENVDD */ + lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <70000>; + }; + + lcd0: display { + compatible = "sharp,ls037v7dw01"; + label = "lcd"; + power-supply = <&lcd_3v3>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <18>; + }; + }; +}; + +&mcspi1 { + tsc2046@0 { + reg = <0>; /* CS0 */ + compatible = "ti,tsc2046"; + spi-max-frequency = <1000000>; + vcc-supply = <&lcd_3v3>; + ti,x-min = /bits/ 16 <0>; + ti,x-max = /bits/ 16 <8000>; + ti,y-min = /bits/ 16 <0>; + ti,y-max = /bits/ 16 <4800>; + ti,x-plate-ohms = /bits/ 16 <40>; + ti,pressure-max = /bits/ 16 <255>; + ti,swap-xy; + linux,wakeup; + }; +}; diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index cd53a64d8f2e..6dc84d9f9b4c 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -15,6 +15,10 @@ model = "OMAP4430 Gumstix Duovero on Parlor"; compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; + aliases { + display0 = &hdmi0; + }; + leds { compatible = "gpio-leds"; led0 { @@ -35,6 +39,21 @@ gpio-key,wakeup; }; }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "d"; + + hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; }; &omap4_pmx_core { @@ -77,6 +96,15 @@ OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48: amdix enabled */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) /* hdmi_hpd.gpio_63 */ + OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ + >; + }; }; &i2c2 { @@ -143,4 +171,20 @@ }; }; +&dss { + status = "ok"; +}; + +&hdmi { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 43a587e097d4..7e26d222bfe3 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -922,6 +922,8 @@ ti,hwmods = "dss_hdmi"; clocks = <&dss_48mhz_clk>, <&dss_sys_clk>; clock-names = "fck", "sys_clk"; + dmas = <&sdma 76>; + dma-names = "audio_tx"; }; }; }; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 3b99ec25b748..1e1b05768cec 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -20,6 +20,10 @@ reg = <0x80000000 0x7F000000>; /* 2032 MB */ }; + aliases { + display0 = &hdmi0; + }; + vmmcsd_fixed: fixedregulator-mmcsd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -51,6 +55,51 @@ default-state = "off"; }; }; + + tpd12s015: encoder@0 { + compatible = "ti,tpd12s015"; + + pinctrl-names = "default"; + pinctrl-0 = <&tpd12s015_pins>; + + gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */ + <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */ + <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint@0 { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint@0 { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "b"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; }; &omap5_pmx_core { @@ -183,6 +232,19 @@ >; }; + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ + 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ + >; + }; }; &omap5_pmx_wkup { @@ -434,6 +496,13 @@ pinctrl-0 = <&i2c5_pins>; clock-frequency = <400000>; + + gpio9: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; }; &mcbsp3 { @@ -491,3 +560,21 @@ &cpu0 { cpu0-supply = <&smps123_reg>; }; + +&dss { + status = "ok"; +}; + +&hdmi { + status = "ok"; + vdda-supply = <&ldo4_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index e58be57984ab..3bfda16c8b52 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -924,6 +924,68 @@ ti,hwmods = "sata"; }; + dss: dss@58000000 { + compatible = "ti,omap5-dss"; + reg = <0x58000000 0x80>; + status = "disabled"; + ti,hwmods = "dss_core"; + clocks = <&dss_dss_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dispc@58001000 { + compatible = "ti,omap5-dispc"; + reg = <0x58001000 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "dss_dispc"; + clocks = <&dss_dss_clk>; + clock-names = "fck"; + }; + + dsi1: encoder@58004000 { + compatible = "ti,omap5-dsi"; + reg = <0x58004000 0x200>, + <0x58004200 0x40>, + <0x58004300 0x40>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + ti,hwmods = "dss_dsi1"; + clocks = <&dss_dss_clk>, <&dss_sys_clk>; + clock-names = "fck", "sys_clk"; + }; + + dsi2: encoder@58005000 { + compatible = "ti,omap5-dsi"; + reg = <0x58009000 0x200>, + <0x58009200 0x40>, + <0x58009300 0x40>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + ti,hwmods = "dss_dsi2"; + clocks = <&dss_dss_clk>, <&dss_sys_clk>; + clock-names = "fck", "sys_clk"; + }; + + hdmi: encoder@58060000 { + compatible = "ti,omap5-hdmi"; + reg = <0x58040000 0x200>, + <0x58040200 0x80>, + <0x58040300 0x80>, + <0x58060000 0x19000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + ti,hwmods = "dss_hdmi"; + clocks = <&dss_48mhz_clk>, <&dss_sys_clk>; + clock-names = "fck", "sys_clk"; + dmas = <&sdma 76>; + dma-names = "audio_tx"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 3df7ba860282..963b7e54ab15 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -48,7 +48,7 @@ ranges = <0x40000000 0x40000000 0x80000000>; l2-cache-controller@80040000 { - compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache"; + compatible = "arm,pl310-cache"; reg = <0x80040000 0x1000>; interrupts = <59>; arm,tag-latency = <1 1 1>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index c7b794ed337d..d96e179490ce 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -713,7 +713,7 @@ }; i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; @@ -724,7 +724,7 @@ }; i2c1: i2c@01c2b000 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; @@ -735,7 +735,7 @@ }; i2c2: i2c@01c2b400 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index aa1dd59dc34a..b64f705d9008 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -560,7 +560,7 @@ i2c0: i2c@01c2ac00 { #address-cells = <1>; #size-cells = <0>; - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; @@ -571,7 +571,7 @@ i2c1: i2c@01c2b000 { #address-cells = <1>; #size-cells = <0>; - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; @@ -582,7 +582,7 @@ i2c2: i2c@01c2b400 { #address-cells = <1>; #size-cells = <0>; - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index c9fdb7b3ecd9..3b2a94c40f6e 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -486,7 +486,7 @@ }; i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; @@ -497,7 +497,7 @@ }; i2c1: i2c@01c2b000 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; @@ -508,7 +508,7 @@ }; i2c2: i2c@01c2b400 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 0f4ea4990d2c..a9dfa12eb735 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -621,6 +621,17 @@ status = "disabled"; }; + timer@01c60000 { + compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <0 51 4>, + <0 52 4>, + <0 53 4>, + <0 54 4>; + clocks = <&ahb1_gates 19>; + resets = <&ahb1_rst 19>; + }; + spi0: spi@01c68000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c68000 0x1000>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 385933bac114..01e94664232a 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -863,7 +863,7 @@ }; i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <0 7 4>; clocks = <&apb1_gates 0>; @@ -874,7 +874,7 @@ }; i2c1: i2c@01c2b000 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <0 8 4>; clocks = <&apb1_gates 1>; @@ -885,7 +885,7 @@ }; i2c2: i2c@01c2b400 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <0 9 4>; clocks = <&apb1_gates 2>; @@ -896,7 +896,7 @@ }; i2c3: i2c@01c2b800 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b800 0x400>; interrupts = <0 88 4>; clocks = <&apb1_gates 3>; @@ -907,7 +907,7 @@ }; i2c4: i2c@01c2c000 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2c000 0x400>; interrupts = <0 89 4>; clocks = <&apb1_gates 15>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index c544a5504591..d2709b73316b 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -88,6 +88,14 @@ interrupts = <1 13 0x304>; }; + timer@2c000200 { + compatible = "arm,cortex-a5-global-timer", + "arm,cortex-a9-global-timer"; + reg = <0x2c000200 0x20>; + interrupts = <1 11 0x304>; + clocks = <&oscclk0>; + }; + watchdog@2c000620 { compatible = "arm,cortex-a5-twd-wdt"; reg = <0x2c000620 0x20>; @@ -120,7 +128,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - osc@0 { + oscclk0: osc@0 { /* CPU and internal AXI reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 73355ddc5186..6cc314e7b8fb 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -371,6 +371,19 @@ status = "disabled"; }; + ftm: ftm@400b8000 { + compatible = "fsl,ftm-timer"; + reg = <0x400b8000 0x1000 0x400b9000 0x1000>; + interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ftm-evt", "ftm-src", + "ftm-evt-counter-en", "ftm-src-counter-en"; + clocks = <&clks VF610_CLK_FTM2>, + <&clks VF610_CLK_FTM3>, + <&clks VF610_CLK_FTM2_EXT_FIX_EN>, + <&clks VF610_CLK_FTM3_EXT_FIX_EN>; + status = "disabled"; + }; + fec0: ethernet@400d0000 { compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index 86fd60fefbc9..f91136ab447e 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -106,14 +106,14 @@ void mcpm_cpu_power_down(void) BUG(); } -int mcpm_cpu_power_down_finish(unsigned int cpu, unsigned int cluster) +int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster) { int ret; - if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down_finish)) + if (WARN_ON_ONCE(!platform_ops || !platform_ops->wait_for_powerdown)) return -EUNATCH; - ret = platform_ops->power_down_finish(cpu, cluster); + ret = platform_ops->wait_for_powerdown(cpu, cluster); if (ret) pr_warn("%s: cpu %u, cluster %u failed to power down (%d)\n", __func__, cpu, cluster, ret); diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c index 177251a4dd9a..92e54d7c6f46 100644 --- a/arch/arm/common/mcpm_platsmp.c +++ b/arch/arm/common/mcpm_platsmp.c @@ -62,7 +62,7 @@ static int mcpm_cpu_kill(unsigned int cpu) cpu_to_pcpu(cpu, &pcpu, &pcluster); - return !mcpm_cpu_power_down_finish(pcpu, pcluster); + return !mcpm_wait_for_cpu_powerdown(pcpu, pcluster); } static int mcpm_cpu_disable(unsigned int cpu) diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 5bae19557591..c1f5adc5493e 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -73,7 +73,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_CPU=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PL030=y -CONFIG_COMMON_CLK_DEBUG=y CONFIG_EXT2_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 095bb52671f6..932ae40fb128 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -112,6 +112,7 @@ CONFIG_MTD_PLATRAM=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_DAVINCI=y +CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y @@ -131,6 +132,9 @@ CONFIG_SPI=y CONFIG_SPI_DAVINCI=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_KEYSTONE=y CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y CONFIG_DAVINCI_WATCHDOG=y @@ -145,7 +149,6 @@ CONFIG_USB_DWC3_VERBOSE=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y -CONFIG_COMMON_CLK_DEBUG=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=y CONFIG_EXT4_FS=y diff --git a/arch/arm/configs/vt8500_v6_v7_defconfig b/arch/arm/configs/vt8500_v6_v7_defconfig index f0520176acd0..9e7a25639690 100644 --- a/arch/arm/configs/vt8500_v6_v7_defconfig +++ b/arch/arm/configs/vt8500_v6_v7_defconfig @@ -73,7 +73,6 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_VT8500=y CONFIG_DMADEVICES=y -CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_PWM=y CONFIG_PWM_VT8500=y diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 23e728ecf8ab..f5a357601983 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -21,6 +21,7 @@ generic-y += parport.h generic-y += poll.h generic-y += preempt.h generic-y += resource.h +generic-y += rwsem.h generic-y += sections.h generic-y += segment.h generic-y += sembuf.h diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index b974184f9941..57f0584e8d97 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -312,7 +312,7 @@ * you cannot return to the original mode. */ .macro safe_svcmode_maskall reg:req -#if __LINUX_ARM_ARCH__ >= 6 +#if __LINUX_ARM_ARCH__ >= 6 && !defined(CONFIG_CPU_V7M) mrs \reg , cpsr eor \reg, \reg, #HYP_MODE tst \reg, #MODE_MASK diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 8b8b61685a34..fd43f7f55b70 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -212,7 +212,7 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *, static inline void __flush_icache_all(void) { __flush_icache_preferred(); - dsb(); + dsb(ishst); } /* @@ -487,4 +487,6 @@ int set_memory_rw(unsigned long addr, int numpages); int set_memory_x(unsigned long addr, int numpages); int set_memory_nx(unsigned long addr, int numpages); +void flush_uprobe_xol_access(struct page *page, unsigned long uaddr, + void *kaddr, unsigned long len); #endif diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h index 6493802f880a..c3f11524f10c 100644 --- a/arch/arm/include/asm/cp15.h +++ b/arch/arm/include/asm/cp15.h @@ -42,24 +42,23 @@ #ifndef __ASSEMBLY__ #if __LINUX_ARM_ARCH__ >= 4 -#define vectors_high() (cr_alignment & CR_V) +#define vectors_high() (get_cr() & CR_V) #else #define vectors_high() (0) #endif #ifdef CONFIG_CPU_CP15 -extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ extern unsigned long cr_alignment; /* defined in entry-armv.S */ -static inline unsigned int get_cr(void) +static inline unsigned long get_cr(void) { - unsigned int val; + unsigned long val; asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc"); return val; } -static inline void set_cr(unsigned int val) +static inline void set_cr(unsigned long val) { asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" : : "r" (val) : "cc"); @@ -80,10 +79,6 @@ static inline void set_auxcr(unsigned int val) isb(); } -#ifndef CONFIG_SMP -extern void adjust_cr(unsigned long mask, unsigned long set); -#endif - #define CPACC_FULL(n) (3 << (n * 2)) #define CPACC_SVC(n) (1 << (n * 2)) #define CPACC_DISABLE(n) (0 << (n * 2)) @@ -106,13 +101,17 @@ static inline void set_copro_access(unsigned int val) #else /* ifdef CONFIG_CPU_CP15 */ /* - * cr_alignment and cr_no_alignment are tightly coupled to cp15 (at least in the - * minds of the developers). Yielding 0 for machines without a cp15 (and making - * it read-only) is fine for most cases and saves quite some #ifdeffery. + * cr_alignment is tightly coupled to cp15 (at least in the minds of the + * developers). Yielding 0 for machines without a cp15 (and making it + * read-only) is fine for most cases and saves quite some #ifdeffery. */ -#define cr_no_alignment UL(0) #define cr_alignment UL(0) +static inline unsigned long get_cr(void) +{ + return 0; +} + #endif /* ifdef CONFIG_CPU_CP15 / else */ #endif /* ifndef __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 4764344367d4..8c2b7321a478 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -72,6 +72,7 @@ #define ARM_CPU_PART_CORTEX_A15 0xC0F0 #define ARM_CPU_PART_CORTEX_A7 0xC070 #define ARM_CPU_PART_CORTEX_A12 0xC0D0 +#define ARM_CPU_PART_CORTEX_A17 0xC0E0 #define ARM_CPU_XSCALE_ARCH_MASK 0xe000 #define ARM_CPU_XSCALE_ARCH_V1 0x2000 diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index e701a4d9aa59..c45b61a4b4a5 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -58,21 +58,37 @@ static inline int dma_set_mask(struct device *dev, u64 mask) #ifndef __arch_pfn_to_dma static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn) { + if (dev) + pfn -= dev->dma_pfn_offset; return (dma_addr_t)__pfn_to_bus(pfn); } static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr) { - return __bus_to_pfn(addr); + unsigned long pfn = __bus_to_pfn(addr); + + if (dev) + pfn += dev->dma_pfn_offset; + + return pfn; } static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) { + if (dev) { + unsigned long pfn = dma_to_pfn(dev, addr); + + return phys_to_virt(__pfn_to_phys(pfn)); + } + return (void *)__bus_to_virt((unsigned long)addr); } static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) { + if (dev) + return pfn_to_dma(dev, virt_to_pfn(addr)); + return (dma_addr_t)__virt_to_bus((unsigned long)(addr)); } @@ -105,6 +121,13 @@ static inline unsigned long dma_max_pfn(struct device *dev) } #define dma_max_pfn(dev) dma_max_pfn(dev) +static inline int set_arch_dma_coherent_ops(struct device *dev) +{ + set_dma_ops(dev, &arm_coherent_dma_ops); + return 0; +} +#define set_arch_dma_coherent_ops(dev) set_arch_dma_coherent_ops(dev) + static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) { unsigned int offset = paddr & ~PAGE_MASK; diff --git a/arch/arm/include/asm/fixmap.h b/arch/arm/include/asm/fixmap.h index bbae919bceb4..74124b0d0d79 100644 --- a/arch/arm/include/asm/fixmap.h +++ b/arch/arm/include/asm/fixmap.h @@ -1,24 +1,11 @@ #ifndef _ASM_FIXMAP_H #define _ASM_FIXMAP_H -/* - * Nothing too fancy for now. - * - * On ARM we already have well known fixed virtual addresses imposed by - * the architecture such as the vector page which is located at 0xffff0000, - * therefore a second level page table is already allocated covering - * 0xfff00000 upwards. - * - * The cache flushing code in proc-xscale.S uses the virtual area between - * 0xfffe0000 and 0xfffeffff. - */ - -#define FIXADDR_START 0xfff00000UL -#define FIXADDR_TOP 0xfffe0000UL +#define FIXADDR_START 0xffc00000UL +#define FIXADDR_TOP 0xffe00000UL #define FIXADDR_SIZE (FIXADDR_TOP - FIXADDR_START) -#define FIX_KMAP_BEGIN 0 -#define FIX_KMAP_END (FIXADDR_SIZE >> PAGE_SHIFT) +#define FIX_KMAP_NR_PTES (FIXADDR_SIZE >> PAGE_SHIFT) #define __fix_to_virt(x) (FIXADDR_START + ((x) << PAGE_SHIFT)) #define __virt_to_fix(x) (((x) - FIXADDR_START) >> PAGE_SHIFT) @@ -27,7 +14,7 @@ extern void __this_fixmap_does_not_exist(void); static inline unsigned long fix_to_virt(const unsigned int idx) { - if (idx >= FIX_KMAP_END) + if (idx >= FIX_KMAP_NR_PTES) __this_fixmap_does_not_exist(); return __fix_to_virt(idx); } diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index f89515adac60..eb577f4f5f70 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -52,15 +52,7 @@ extern inline void *return_address(unsigned int level) #endif -#define HAVE_ARCH_CALLER_ADDR - -#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) -#define CALLER_ADDR1 ((unsigned long)return_address(1)) -#define CALLER_ADDR2 ((unsigned long)return_address(2)) -#define CALLER_ADDR3 ((unsigned long)return_address(3)) -#define CALLER_ADDR4 ((unsigned long)return_address(4)) -#define CALLER_ADDR5 ((unsigned long)return_address(5)) -#define CALLER_ADDR6 ((unsigned long)return_address(6)) +#define ftrace_return_addr(n) return_address(n) #endif /* ifndef __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index c81adc08b3fb..a3c24cd5b7c8 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -130,22 +130,22 @@ #endif #ifndef __ASSEMBLER__ -extern inline void nop_flush_icache_all(void) { } -extern inline void nop_flush_kern_cache_all(void) { } -extern inline void nop_flush_kern_cache_louis(void) { } -extern inline void nop_flush_user_cache_all(void) { } -extern inline void nop_flush_user_cache_range(unsigned long a, +static inline void nop_flush_icache_all(void) { } +static inline void nop_flush_kern_cache_all(void) { } +static inline void nop_flush_kern_cache_louis(void) { } +static inline void nop_flush_user_cache_all(void) { } +static inline void nop_flush_user_cache_range(unsigned long a, unsigned long b, unsigned int c) { } -extern inline void nop_coherent_kern_range(unsigned long a, unsigned long b) { } -extern inline int nop_coherent_user_range(unsigned long a, +static inline void nop_coherent_kern_range(unsigned long a, unsigned long b) { } +static inline int nop_coherent_user_range(unsigned long a, unsigned long b) { return 0; } -extern inline void nop_flush_kern_dcache_area(void *a, size_t s) { } +static inline void nop_flush_kern_dcache_area(void *a, size_t s) { } -extern inline void nop_dma_flush_range(const void *a, const void *b) { } +static inline void nop_dma_flush_range(const void *a, const void *b) { } -extern inline void nop_dma_map_area(const void *s, size_t l, int f) { } -extern inline void nop_dma_unmap_area(const void *s, size_t l, int f) { } +static inline void nop_dma_map_area(const void *s, size_t l, int f) { } +static inline void nop_dma_unmap_area(const void *s, size_t l, int f) { } #endif #ifndef MULTI_CACHE diff --git a/arch/arm/include/asm/glue-df.h b/arch/arm/include/asm/glue-df.h index 6b70f1b46a6e..04e18b656659 100644 --- a/arch/arm/include/asm/glue-df.h +++ b/arch/arm/include/asm/glue-df.h @@ -31,14 +31,6 @@ #undef CPU_DABORT_HANDLER #undef MULTI_DABORT -#if defined(CONFIG_CPU_ARM710) -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER cpu_arm7_data_abort -# endif -#endif - #ifdef CONFIG_CPU_ABRT_EV4 # ifdef CPU_DABORT_HANDLER # define MULTI_DABORT 1 diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 6795ff743b3d..3a5ec1c25659 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -26,8 +26,8 @@ #define L2X0_CACHE_TYPE 0x004 #define L2X0_CTRL 0x100 #define L2X0_AUX_CTRL 0x104 -#define L2X0_TAG_LATENCY_CTRL 0x108 -#define L2X0_DATA_LATENCY_CTRL 0x10C +#define L310_TAG_LATENCY_CTRL 0x108 +#define L310_DATA_LATENCY_CTRL 0x10C #define L2X0_EVENT_CNT_CTRL 0x200 #define L2X0_EVENT_CNT1_CFG 0x204 #define L2X0_EVENT_CNT0_CFG 0x208 @@ -54,53 +54,93 @@ #define L2X0_LOCKDOWN_WAY_D_BASE 0x900 #define L2X0_LOCKDOWN_WAY_I_BASE 0x904 #define L2X0_LOCKDOWN_STRIDE 0x08 -#define L2X0_ADDR_FILTER_START 0xC00 -#define L2X0_ADDR_FILTER_END 0xC04 +#define L310_ADDR_FILTER_START 0xC00 +#define L310_ADDR_FILTER_END 0xC04 #define L2X0_TEST_OPERATION 0xF00 #define L2X0_LINE_DATA 0xF10 #define L2X0_LINE_TAG 0xF30 #define L2X0_DEBUG_CTRL 0xF40 -#define L2X0_PREFETCH_CTRL 0xF60 -#define L2X0_POWER_CTRL 0xF80 -#define L2X0_DYNAMIC_CLK_GATING_EN (1 << 1) -#define L2X0_STNDBY_MODE_EN (1 << 0) +#define L310_PREFETCH_CTRL 0xF60 +#define L310_POWER_CTRL 0xF80 +#define L310_DYNAMIC_CLK_GATING_EN (1 << 1) +#define L310_STNDBY_MODE_EN (1 << 0) /* Registers shifts and masks */ #define L2X0_CACHE_ID_PART_MASK (0xf << 6) #define L2X0_CACHE_ID_PART_L210 (1 << 6) +#define L2X0_CACHE_ID_PART_L220 (2 << 6) #define L2X0_CACHE_ID_PART_L310 (3 << 6) #define L2X0_CACHE_ID_RTL_MASK 0x3f -#define L2X0_CACHE_ID_RTL_R0P0 0x0 -#define L2X0_CACHE_ID_RTL_R1P0 0x2 -#define L2X0_CACHE_ID_RTL_R2P0 0x4 -#define L2X0_CACHE_ID_RTL_R3P0 0x5 -#define L2X0_CACHE_ID_RTL_R3P1 0x6 -#define L2X0_CACHE_ID_RTL_R3P2 0x8 +#define L210_CACHE_ID_RTL_R0P2_02 0x00 +#define L210_CACHE_ID_RTL_R0P1 0x01 +#define L210_CACHE_ID_RTL_R0P2_01 0x02 +#define L210_CACHE_ID_RTL_R0P3 0x03 +#define L210_CACHE_ID_RTL_R0P4 0x0b +#define L210_CACHE_ID_RTL_R0P5 0x0f +#define L220_CACHE_ID_RTL_R1P7_01REL0 0x06 +#define L310_CACHE_ID_RTL_R0P0 0x00 +#define L310_CACHE_ID_RTL_R1P0 0x02 +#define L310_CACHE_ID_RTL_R2P0 0x04 +#define L310_CACHE_ID_RTL_R3P0 0x05 +#define L310_CACHE_ID_RTL_R3P1 0x06 +#define L310_CACHE_ID_RTL_R3P1_50REL0 0x07 +#define L310_CACHE_ID_RTL_R3P2 0x08 +#define L310_CACHE_ID_RTL_R3P3 0x09 -#define L2X0_AUX_CTRL_MASK 0xc0000fff +/* L2C auxiliary control register - bits common to L2C-210/220/310 */ +#define L2C_AUX_CTRL_WAY_SIZE_SHIFT 17 +#define L2C_AUX_CTRL_WAY_SIZE_MASK (7 << 17) +#define L2C_AUX_CTRL_WAY_SIZE(n) ((n) << 17) +#define L2C_AUX_CTRL_EVTMON_ENABLE BIT(20) +#define L2C_AUX_CTRL_PARITY_ENABLE BIT(21) +#define L2C_AUX_CTRL_SHARED_OVERRIDE BIT(22) +/* L2C-210/220 common bits */ #define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT 0 -#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK 0x7 +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK (7 << 0) #define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT 3 -#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (0x7 << 3) +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (7 << 3) #define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT 6 -#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (0x7 << 6) +#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (7 << 6) #define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT 9 -#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (0x7 << 9) -#define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16 -#define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17 -#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17) -#define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT 22 -#define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT 26 -#define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT 27 -#define L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT 28 -#define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT 29 -#define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT 30 +#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (7 << 9) +#define L2X0_AUX_CTRL_ASSOC_SHIFT 13 +#define L2X0_AUX_CTRL_ASSOC_MASK (15 << 13) +/* L2C-210 specific bits */ +#define L210_AUX_CTRL_WRAP_DISABLE BIT(12) +#define L210_AUX_CTRL_WA_OVERRIDE BIT(23) +#define L210_AUX_CTRL_EXCLUSIVE_ABORT BIT(24) +/* L2C-220 specific bits */ +#define L220_AUX_CTRL_EXCLUSIVE_CACHE BIT(12) +#define L220_AUX_CTRL_FWA_SHIFT 23 +#define L220_AUX_CTRL_FWA_MASK (3 << 23) +#define L220_AUX_CTRL_NS_LOCKDOWN BIT(26) +#define L220_AUX_CTRL_NS_INT_CTRL BIT(27) +/* L2C-310 specific bits */ +#define L310_AUX_CTRL_FULL_LINE_ZERO BIT(0) /* R2P0+ */ +#define L310_AUX_CTRL_HIGHPRIO_SO_DEV BIT(10) /* R2P0+ */ +#define L310_AUX_CTRL_STORE_LIMITATION BIT(11) /* R2P0+ */ +#define L310_AUX_CTRL_EXCLUSIVE_CACHE BIT(12) +#define L310_AUX_CTRL_ASSOCIATIVITY_16 BIT(16) +#define L310_AUX_CTRL_CACHE_REPLACE_RR BIT(25) /* R2P0+ */ +#define L310_AUX_CTRL_NS_LOCKDOWN BIT(26) +#define L310_AUX_CTRL_NS_INT_CTRL BIT(27) +#define L310_AUX_CTRL_DATA_PREFETCH BIT(28) +#define L310_AUX_CTRL_INSTR_PREFETCH BIT(29) +#define L310_AUX_CTRL_EARLY_BRESP BIT(30) /* R2P0+ */ -#define L2X0_LATENCY_CTRL_SETUP_SHIFT 0 -#define L2X0_LATENCY_CTRL_RD_SHIFT 4 -#define L2X0_LATENCY_CTRL_WR_SHIFT 8 +#define L310_LATENCY_CTRL_SETUP(n) ((n) << 0) +#define L310_LATENCY_CTRL_RD(n) ((n) << 4) +#define L310_LATENCY_CTRL_WR(n) ((n) << 8) -#define L2X0_ADDR_FILTER_EN 1 +#define L310_ADDR_FILTER_EN 1 + +#define L310_PREFETCH_CTRL_OFFSET_MASK 0x1f +#define L310_PREFETCH_CTRL_DBL_LINEFILL_INCR BIT(23) +#define L310_PREFETCH_CTRL_PREFETCH_DROP BIT(24) +#define L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP BIT(27) +#define L310_PREFETCH_CTRL_DATA_PREFETCH BIT(28) +#define L310_PREFETCH_CTRL_INSTR_PREFETCH BIT(29) +#define L310_PREFETCH_CTRL_DBL_LINEFILL BIT(30) #define L2X0_CTRL_EN 1 diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index 91b99abe7a95..535579511ed0 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -18,6 +18,7 @@ } while (0) extern pte_t *pkmap_page_table; +extern pte_t *fixmap_page_table; extern void *kmap_high(struct page *page); extern void kunmap_high(struct page *page); diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 8aa4cca74501..3d23418cbddd 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -179,6 +179,12 @@ static inline void __iomem *__typesafe_io(unsigned long addr) /* PCI fixed i/o mapping */ #define PCI_IO_VIRT_BASE 0xfee00000 +#if defined(CONFIG_PCI) +void pci_ioremap_set_mem_type(int mem_type); +#else +static inline void pci_ioremap_set_mem_type(int mem_type) {} +#endif + extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr); /* diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 17a3fa2979e8..060a75e99263 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -14,7 +14,6 @@ #include <linux/reboot.h> struct tag; -struct meminfo; struct pt_regs; struct smp_operations; #ifdef CONFIG_SMP @@ -45,10 +44,12 @@ struct machine_desc { unsigned char reserve_lp1 :1; /* never has lp1 */ unsigned char reserve_lp2 :1; /* never has lp2 */ enum reboot_mode reboot_mode; /* default restart mode */ + unsigned l2c_aux_val; /* L2 cache aux value */ + unsigned l2c_aux_mask; /* L2 cache aux mask */ + void (*l2c_write_sec)(unsigned long, unsigned); struct smp_operations *smp; /* SMP operations */ bool (*smp_init)(void); - void (*fixup)(struct tag *, char **, - struct meminfo *); + void (*fixup)(struct tag *, char **); void (*init_meminfo)(void); void (*reserve)(void);/* reserve mem blocks */ void (*map_io)(void);/* IO mapping function */ diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index a5ff410dcdb6..d9702eb0b02b 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -98,14 +98,14 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster); * previously in which case the caller should take appropriate action. * * On success, the CPU is not guaranteed to be truly halted until - * mcpm_cpu_power_down_finish() subsequently returns non-zero for the + * mcpm_wait_for_cpu_powerdown() subsequently returns non-zero for the * specified cpu. Until then, other CPUs should make sure they do not * trash memory the target CPU might be executing/accessing. */ void mcpm_cpu_power_down(void); /** - * mcpm_cpu_power_down_finish - wait for a specified CPU to halt, and + * mcpm_wait_for_cpu_powerdown - wait for a specified CPU to halt, and * make sure it is powered off * * @cpu: CPU number within given cluster @@ -127,7 +127,7 @@ void mcpm_cpu_power_down(void); * - zero if the CPU is in a safely parked state * - nonzero otherwise (e.g., timeout) */ -int mcpm_cpu_power_down_finish(unsigned int cpu, unsigned int cluster); +int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster); /** * mcpm_cpu_suspend - bring the calling CPU in a suspended state @@ -171,7 +171,7 @@ int mcpm_cpu_powered_up(void); struct mcpm_platform_ops { int (*power_up)(unsigned int cpu, unsigned int cluster); void (*power_down)(void); - int (*power_down_finish)(unsigned int cpu, unsigned int cluster); + int (*wait_for_powerdown)(unsigned int cpu, unsigned int cluster); void (*suspend)(u64); void (*powered_up)(void); }; diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h index c2f5102ae659..bf47a6c110a2 100644 --- a/arch/arm/include/asm/memblock.h +++ b/arch/arm/include/asm/memblock.h @@ -1,10 +1,9 @@ #ifndef _ASM_ARM_MEMBLOCK_H #define _ASM_ARM_MEMBLOCK_H -struct meminfo; struct machine_desc; -void arm_memblock_init(struct meminfo *, const struct machine_desc *); +void arm_memblock_init(const struct machine_desc *); phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align); #endif diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 02fa2558f662..2b751464d6ff 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -83,8 +83,6 @@ */ #define IOREMAP_MAX_ORDER 24 -#define CONSISTENT_END (0xffe00000UL) - #else /* CONFIG_MMU */ /* diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index f94784f0e3a6..891a56b35bcf 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -28,53 +28,84 @@ struct outer_cache_fns { void (*clean_range)(unsigned long, unsigned long); void (*flush_range)(unsigned long, unsigned long); void (*flush_all)(void); - void (*inv_all)(void); void (*disable)(void); #ifdef CONFIG_OUTER_CACHE_SYNC void (*sync)(void); #endif - void (*set_debug)(unsigned long); void (*resume)(void); + + /* This is an ARM L2C thing */ + void (*write_sec)(unsigned long, unsigned); }; extern struct outer_cache_fns outer_cache; #ifdef CONFIG_OUTER_CACHE - +/** + * outer_inv_range - invalidate range of outer cache lines + * @start: starting physical address, inclusive + * @end: end physical address, exclusive + */ static inline void outer_inv_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.inv_range) outer_cache.inv_range(start, end); } + +/** + * outer_clean_range - clean dirty outer cache lines + * @start: starting physical address, inclusive + * @end: end physical address, exclusive + */ static inline void outer_clean_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.clean_range) outer_cache.clean_range(start, end); } + +/** + * outer_flush_range - clean and invalidate outer cache lines + * @start: starting physical address, inclusive + * @end: end physical address, exclusive + */ static inline void outer_flush_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.flush_range) outer_cache.flush_range(start, end); } +/** + * outer_flush_all - clean and invalidate all cache lines in the outer cache + * + * Note: depending on implementation, this may not be atomic - it must + * only be called with interrupts disabled and no other active outer + * cache masters. + * + * It is intended that this function is only used by implementations + * needing to override the outer_cache.disable() method due to security. + * (Some implementations perform this as a clean followed by an invalidate.) + */ static inline void outer_flush_all(void) { if (outer_cache.flush_all) outer_cache.flush_all(); } -static inline void outer_inv_all(void) -{ - if (outer_cache.inv_all) - outer_cache.inv_all(); -} - -static inline void outer_disable(void) -{ - if (outer_cache.disable) - outer_cache.disable(); -} +/** + * outer_disable - clean, invalidate and disable the outer cache + * + * Disable the outer cache, ensuring that any data contained in the outer + * cache is pushed out to lower levels of system memory. The note and + * conditions above concerning outer_flush_all() applies here. + */ +extern void outer_disable(void); +/** + * outer_resume - restore the cache configuration and re-enable outer cache + * + * Restore any configuration that the cache had when previously enabled, + * and re-enable the outer cache. + */ static inline void outer_resume(void) { if (outer_cache.resume) @@ -90,13 +121,18 @@ static inline void outer_clean_range(phys_addr_t start, phys_addr_t end) static inline void outer_flush_range(phys_addr_t start, phys_addr_t end) { } static inline void outer_flush_all(void) { } -static inline void outer_inv_all(void) { } static inline void outer_disable(void) { } static inline void outer_resume(void) { } #endif #ifdef CONFIG_OUTER_CACHE_SYNC +/** + * outer_sync - perform a sync point for outer cache + * + * Ensure that all outer cache operations are complete and any store + * buffers are drained. + */ static inline void outer_sync(void) { if (outer_cache.sync) diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index b681575ad3de..cd94ef2ef283 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -14,7 +14,6 @@ #ifdef CONFIG_OF extern const struct machine_desc *setup_machine_fdt(unsigned int dt_phys); -extern void arm_dt_memblock_reserve(void); extern void __init arm_dt_init_cpu_maps(void); #else /* CONFIG_OF */ @@ -24,7 +23,6 @@ static inline const struct machine_desc *setup_machine_fdt(unsigned int dt_phys) return NULL; } -static inline void arm_dt_memblock_reserve(void) { } static inline void arm_dt_init_cpu_maps(void) { } #endif /* CONFIG_OF */ diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 8d6a089dfb76..e0adb9f1bf94 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -21,34 +21,6 @@ #define __tagtable(tag, fn) \ static const struct tagtable __tagtable_##fn __tag = { tag, fn } -/* - * Memory map description - */ -#define NR_BANKS CONFIG_ARM_NR_BANKS - -struct membank { - phys_addr_t start; - phys_addr_t size; - unsigned int highmem; -}; - -struct meminfo { - int nr_banks; - struct membank bank[NR_BANKS]; -}; - -extern struct meminfo meminfo; - -#define for_each_bank(iter,mi) \ - for (iter = 0; iter < (mi)->nr_banks; iter++) - -#define bank_pfn_start(bank) __phys_to_pfn((bank)->start) -#define bank_pfn_end(bank) __phys_to_pfn((bank)->start + (bank)->size) -#define bank_pfn_size(bank) ((bank)->size >> PAGE_SHIFT) -#define bank_phys_start(bank) (bank)->start -#define bank_phys_end(bank) ((bank)->start + (bank)->size) -#define bank_phys_size(bank) (bank)->size - extern int arm_add_memory(u64 start, u64 size); extern void early_print(const char *str, ...); extern void dump_machine_table(void); diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 040619c32d68..38ddd9f83d0e 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o +obj-$(CONFIG_HIBERNATION) += hibernate.o obj-$(CONFIG_SMP) += smp.o ifdef CONFIG_MMU obj-$(CONFIG_SMP) += smp_tlb.o diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c index 8c14de8180c0..7807ef58a2ab 100644 --- a/arch/arm/kernel/atags_parse.c +++ b/arch/arm/kernel/atags_parse.c @@ -22,6 +22,7 @@ #include <linux/fs.h> #include <linux/root_dev.h> #include <linux/screen_info.h> +#include <linux/memblock.h> #include <asm/setup.h> #include <asm/system_info.h> @@ -222,10 +223,10 @@ setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr) } if (mdesc->fixup) - mdesc->fixup(tags, &from, &meminfo); + mdesc->fixup(tags, &from); if (tags->hdr.tag == ATAG_CORE) { - if (meminfo.nr_banks != 0) + if (memblock_phys_mem_size()) squash_mem_tags(tags); save_atags(tags); parse_tags(tags); diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index c7419a585ddc..e94a157ddff1 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -27,56 +27,23 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -void __init early_init_dt_add_memory_arch(u64 base, u64 size) -{ - arm_add_memory(base, size); -} - -void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) -{ - return memblock_virt_alloc(size, align); -} - -void __init arm_dt_memblock_reserve(void) -{ - u64 *reserve_map, base, size; - - if (!initial_boot_params) - return; - /* Reserve the dtb region */ - memblock_reserve(virt_to_phys(initial_boot_params), - be32_to_cpu(initial_boot_params->totalsize)); +#ifdef CONFIG_SMP +extern struct of_cpu_method __cpu_method_of_table[]; - /* - * Process the reserve map. This will probably overlap the initrd - * and dtb locations which are already reserved, but overlaping - * doesn't hurt anything - */ - reserve_map = ((void*)initial_boot_params) + - be32_to_cpu(initial_boot_params->off_mem_rsvmap); - while (1) { - base = be64_to_cpup(reserve_map++); - size = be64_to_cpup(reserve_map++); - if (!size) - break; - memblock_reserve(base, size); - } -} +static const struct of_cpu_method __cpu_method_of_table_sentinel + __used __section(__cpu_method_of_table_end); -#ifdef CONFIG_SMP -extern struct of_cpu_method __cpu_method_of_table_begin[]; -extern struct of_cpu_method __cpu_method_of_table_end[]; static int __init set_smp_ops_by_method(struct device_node *node) { const char *method; - struct of_cpu_method *m = __cpu_method_of_table_begin; + struct of_cpu_method *m = __cpu_method_of_table; if (of_property_read_string(node, "enable-method", &method)) return 0; - for (; m < __cpu_method_of_table_end; m++) + for (; m->method; m++) if (!strcmp(m->method, method)) { smp_set_ops(m->ops); return 1; @@ -252,7 +219,7 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) if (!mdesc) { const char *prop; - long size; + int size; unsigned long dt_root; early_print("\nError: unrecognized/unsupported " diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 1879e8dd2acc..52a949a8077d 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -344,7 +344,7 @@ ENDPROC(__pabt_svc) @ @ Enable the alignment trap while in kernel mode @ - alignment_trap r0 + alignment_trap r0, .LCcralign @ @ Clear FP to mark the first stack frame @@ -413,6 +413,11 @@ __und_usr: @ adr r9, BSYM(ret_from_exception) + @ IRQs must be enabled before attempting to read the instruction from + @ user space since that could cause a page/translation fault if the + @ page table was modified by another CPU. + enable_irq + tst r3, #PSR_T_BIT @ Thumb mode? bne __und_usr_thumb sub r4, r2, #4 @ ARM instr at LR - 4 @@ -484,7 +489,8 @@ ENDPROC(__und_usr) */ .pushsection .fixup, "ax" .align 2 -4: mov pc, r9 +4: str r4, [sp, #S_PC] @ retry current instruction + mov pc, r9 .popsection .pushsection __ex_table,"a" .long 1b, 4b @@ -517,7 +523,7 @@ ENDPROC(__und_usr) * r9 = normal "successful" return address * r10 = this threads thread_info structure * lr = unrecognised instruction return address - * IRQs disabled, FIQs enabled. + * IRQs enabled, FIQs enabled. */ @ @ Fall-through from Thumb-2 __und_usr @@ -624,7 +630,6 @@ call_fpe: #endif do_fpe: - enable_irq ldr r4, .LCfp add r10, r10, #TI_FPSTATE @ r10 = workspace ldr pc, [r4] @ Call FP module USR entry point @@ -652,8 +657,7 @@ __und_usr_fault_32: b 1f __und_usr_fault_16: mov r1, #2 -1: enable_irq - mov r0, sp +1: mov r0, sp adr lr, BSYM(ret_from_exception) b __und_fault ENDPROC(__und_usr_fault_32) @@ -1143,11 +1147,8 @@ __vectors_start: .data .globl cr_alignment - .globl cr_no_alignment cr_alignment: .space 4 -cr_no_alignment: - .space 4 #ifdef CONFIG_MULTI_IRQ_HANDLER .globl handle_arch_irq diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index a2dcafdf1bc8..7139d4a7dea7 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -365,13 +365,7 @@ ENTRY(vector_swi) str r0, [sp, #S_OLD_R0] @ Save OLD_R0 #endif zero_fp - -#ifdef CONFIG_ALIGNMENT_TRAP - ldr ip, __cr_alignment - ldr ip, [ip] - mcr p15, 0, ip, c1, c0 @ update control register -#endif - + alignment_trap ip, __cr_alignment enable_irq ct_user_exit get_thread_info tsk diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index efb208de75ec..5d702f8900b1 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -37,9 +37,9 @@ #endif .endm - .macro alignment_trap, rtemp + .macro alignment_trap, rtemp, label #ifdef CONFIG_ALIGNMENT_TRAP - ldr \rtemp, .LCcralign + ldr \rtemp, \label ldr \rtemp, [\rtemp] mcr p15, 0, \rtemp, c1, c0 #endif diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index c108ddcb9ba4..af9a8a927a4e 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -14,6 +14,7 @@ #include <linux/ftrace.h> #include <linux/uaccess.h> +#include <linux/module.h> #include <asm/cacheflush.h> #include <asm/opcodes.h> @@ -63,6 +64,18 @@ static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) } #endif +int ftrace_arch_code_modify_prepare(void) +{ + set_all_modules_text_rw(); + return 0; +} + +int ftrace_arch_code_modify_post_process(void) +{ + set_all_modules_text_ro(); + return 0; +} + static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) { return arm_gen_branch_link(pc, addr); diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index c96ecacb2021..572a38335c96 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -99,8 +99,7 @@ __mmap_switched: str r1, [r5] @ Save machine type str r2, [r6] @ Save atags pointer cmp r7, #0 - bicne r4, r0, #CR_A @ Clear 'A' bit - stmneia r7, {r0, r4} @ Save control register values + strne r0, [r7] @ Save control register values b start_kernel ENDPROC(__mmap_switched) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 591d6e4a6492..2c35f0ff2fdc 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -475,7 +475,7 @@ ENDPROC(__turn_mmu_on) #ifdef CONFIG_SMP_ON_UP - __INIT + __HEAD __fixup_smp: and r3, r9, #0x000f0000 @ architecture version teq r3, #0x000f0000 @ CPU ID supported? diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c new file mode 100644 index 000000000000..bb8b79648643 --- /dev/null +++ b/arch/arm/kernel/hibernate.c @@ -0,0 +1,107 @@ +/* + * Hibernation support specific for ARM + * + * Derived from work on ARM hibernation support by: + * + * Ubuntu project, hibernation support for mach-dove + * Copyright (C) 2010 Nokia Corporation (Hiroshi Doyu) + * Copyright (C) 2010 Texas Instruments, Inc. (Teerth Reddy et al.) + * https://lkml.org/lkml/2010/6/18/4 + * https://lists.linux-foundation.org/pipermail/linux-pm/2010-June/027422.html + * https://patchwork.kernel.org/patch/96442/ + * + * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/mm.h> +#include <linux/suspend.h> +#include <asm/system_misc.h> +#include <asm/idmap.h> +#include <asm/suspend.h> +#include <asm/memory.h> + +extern const void __nosave_begin, __nosave_end; + +int pfn_is_nosave(unsigned long pfn) +{ + unsigned long nosave_begin_pfn = virt_to_pfn(&__nosave_begin); + unsigned long nosave_end_pfn = virt_to_pfn(&__nosave_end - 1); + + return (pfn >= nosave_begin_pfn) && (pfn <= nosave_end_pfn); +} + +void notrace save_processor_state(void) +{ + WARN_ON(num_online_cpus() != 1); + local_fiq_disable(); +} + +void notrace restore_processor_state(void) +{ + local_fiq_enable(); +} + +/* + * Snapshot kernel memory and reset the system. + * + * swsusp_save() is executed in the suspend finisher so that the CPU + * context pointer and memory are part of the saved image, which is + * required by the resume kernel image to restart execution from + * swsusp_arch_suspend(). + * + * soft_restart is not technically needed, but is used to get success + * returned from cpu_suspend. + * + * When soft reboot completes, the hibernation snapshot is written out. + */ +static int notrace arch_save_image(unsigned long unused) +{ + int ret; + + ret = swsusp_save(); + if (ret == 0) + soft_restart(virt_to_phys(cpu_resume)); + return ret; +} + +/* + * Save the current CPU state before suspend / poweroff. + */ +int notrace swsusp_arch_suspend(void) +{ + return cpu_suspend(0, arch_save_image); +} + +/* + * Restore page contents for physical pages that were in use during loading + * hibernation image. Switch to idmap_pgd so the physical page tables + * are overwritten with the same contents. + */ +static void notrace arch_restore_image(void *unused) +{ + struct pbe *pbe; + + cpu_switch_mm(idmap_pgd, &init_mm); + for (pbe = restore_pblist; pbe; pbe = pbe->next) + copy_page(pbe->orig_address, pbe->address); + + soft_restart(virt_to_phys(cpu_resume)); +} + +static u64 resume_stack[PAGE_SIZE/2/sizeof(u64)] __nosavedata; + +/* + * Resume from the hibernation image. + * Due to the kernel heap / data restore, stack contents change underneath + * and that would make function calls impossible; switch to a temporary + * stack within the nosave region to avoid that problem. + */ +int swsusp_arch_resume(void) +{ + extern void call_with_stack(void (*fn)(void *), void *arg, void *sp); + call_with_stack(arch_restore_image, 0, + resume_stack + ARRAY_SIZE(resume_stack)); + return 0; +} diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 9723d17b8f38..2c4257604513 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -37,6 +37,7 @@ #include <linux/proc_fs.h> #include <linux/export.h> +#include <asm/hardware/cache-l2x0.h> #include <asm/exception.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> @@ -115,10 +116,21 @@ EXPORT_SYMBOL_GPL(set_irq_flags); void __init init_IRQ(void) { + int ret; + if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq) irqchip_init(); else machine_desc->init_irq(); + + if (IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_CACHE_L2X0) && + (machine_desc->l2c_aux_mask || machine_desc->l2c_aux_val)) { + outer_cache.write_sec = machine_desc->l2c_write_sec; + ret = l2x0_of_init(machine_desc->l2c_aux_val, + machine_desc->l2c_aux_mask); + if (ret) + pr_err("L2C: failed to init: %d\n", ret); + } } #ifdef CONFIG_MULTI_IRQ_HANDLER diff --git a/arch/arm/kernel/isa.c b/arch/arm/kernel/isa.c index 346485910732..9d1cf7156895 100644 --- a/arch/arm/kernel/isa.c +++ b/arch/arm/kernel/isa.c @@ -20,7 +20,7 @@ static unsigned int isa_membase, isa_portbase, isa_portshift; -static ctl_table ctl_isa_vars[4] = { +static struct ctl_table ctl_isa_vars[4] = { { .procname = "membase", .data = &isa_membase, @@ -44,7 +44,7 @@ static ctl_table ctl_isa_vars[4] = { static struct ctl_table_header *isa_sysctl_header; -static ctl_table ctl_isa[2] = { +static struct ctl_table ctl_isa[2] = { { .procname = "isa", .mode = 0555, @@ -52,7 +52,7 @@ static ctl_table ctl_isa[2] = { }, {} }; -static ctl_table ctl_bus[2] = { +static struct ctl_table ctl_bus[2] = { { .procname = "bus", .mode = 0555, diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index 2452dd1bef53..a5599cfc43cb 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -18,6 +18,7 @@ #include <asm/ptrace.h> #include <asm/thread_info.h> #include <asm/asm-offsets.h> +#include <asm/assembler.h> #if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B) #define PJ4(code...) code @@ -65,17 +66,18 @@ * r9 = ret_from_exception * lr = undefined instr exit * - * called from prefetch exception handler with interrupts disabled + * called from prefetch exception handler with interrupts enabled */ ENTRY(iwmmxt_task_enable) + inc_preempt_count r10, r3 XSC(mrc p15, 0, r2, c15, c1, 0) PJ4(mrc p15, 0, r2, c1, c0, 2) @ CP0 and CP1 accessible? XSC(tst r2, #0x3) PJ4(tst r2, #0xf) - movne pc, lr @ if so no business here + bne 4f @ if so no business here @ enable access to CP0 and CP1 XSC(orr r2, r2, #0x3) XSC(mcr p15, 0, r2, c15, c1, 0) @@ -136,7 +138,7 @@ concan_dump: wstrd wR15, [r1, #MMX_WR15] 2: teq r0, #0 @ anything to load? - moveq pc, lr + beq 3f concan_load: @@ -169,8 +171,14 @@ concan_load: @ clear CUP/MUP (only if r1 != 0) teq r1, #0 mov r2, #0 - moveq pc, lr + beq 3f tmcr wCon, r2 + +3: +#ifdef CONFIG_PREEMPT_COUNT + get_thread_info r10 +#endif +4: dec_preempt_count r10, r3 mov pc, lr /* diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index 51798d7854ac..a71ae1523620 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -221,6 +221,7 @@ static struct notifier_block cpu_pmu_hotplug_notifier = { * PMU platform driver and devicetree bindings. */ static struct of_device_id cpu_pmu_of_device_ids[] = { + {.compatible = "arm,cortex-a17-pmu", .data = armv7_a17_pmu_init}, {.compatible = "arm,cortex-a15-pmu", .data = armv7_a15_pmu_init}, {.compatible = "arm,cortex-a12-pmu", .data = armv7_a12_pmu_init}, {.compatible = "arm,cortex-a9-pmu", .data = armv7_a9_pmu_init}, diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index f4ef3981ed02..2037f7205987 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -1599,6 +1599,13 @@ static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu) return 0; } +static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu) +{ + armv7_a12_pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A17"; + return 0; +} + /* * Krait Performance Monitor Region Event Selection Register (PMRESRn) * @@ -2021,6 +2028,11 @@ static inline int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu) return -ENODEV; } +static inline int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu) +{ + return -ENODEV; +} + static inline int krait_pmu_init(struct arm_pmu *cpu_pmu) { return -ENODEV; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 50e198c1e9c8..8a16ee5d8a95 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -72,6 +72,7 @@ static int __init fpe_setup(char *line) __setup("fpe=", fpe_setup); #endif +extern void init_default_cache_policy(unsigned long); extern void paging_init(const struct machine_desc *desc); extern void early_paging_init(const struct machine_desc *, struct proc_info_list *); @@ -590,7 +591,7 @@ static void __init setup_processor(void) pr_info("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n", cpu_name, read_cpuid_id(), read_cpuid_id() & 15, - proc_arch[cpu_architecture()], cr_alignment); + proc_arch[cpu_architecture()], get_cr()); snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c", list->arch_name, ENDIANNESS); @@ -603,7 +604,9 @@ static void __init setup_processor(void) #ifndef CONFIG_ARM_THUMB elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT); #endif - +#ifdef CONFIG_MMU + init_default_cache_policy(list->__cpu_mm_mmu_flags); +#endif erratum_a15_798181_init(); feat_v6_fixup(); @@ -628,15 +631,8 @@ void __init dump_machine_table(void) int __init arm_add_memory(u64 start, u64 size) { - struct membank *bank = &meminfo.bank[meminfo.nr_banks]; u64 aligned_start; - if (meminfo.nr_banks >= NR_BANKS) { - pr_crit("NR_BANKS too low, ignoring memory at 0x%08llx\n", - (long long)start); - return -EINVAL; - } - /* * Ensure that start/size are aligned to a page boundary. * Size is appropriately rounded down, start is rounded up. @@ -677,17 +673,17 @@ int __init arm_add_memory(u64 start, u64 size) aligned_start = PHYS_OFFSET; } - bank->start = aligned_start; - bank->size = size & ~(phys_addr_t)(PAGE_SIZE - 1); + start = aligned_start; + size = size & ~(phys_addr_t)(PAGE_SIZE - 1); /* * Check whether this memory region has non-zero size or * invalid node number. */ - if (bank->size == 0) + if (size == 0) return -EINVAL; - meminfo.nr_banks++; + memblock_add(start, size); return 0; } @@ -695,6 +691,7 @@ int __init arm_add_memory(u64 start, u64 size) * Pick out the memory size. We look for mem=size@start, * where start and size are "size[KkMm]" */ + static int __init early_mem(char *p) { static int usermem __initdata = 0; @@ -709,7 +706,8 @@ static int __init early_mem(char *p) */ if (usermem == 0) { usermem = 1; - meminfo.nr_banks = 0; + memblock_remove(memblock_start_of_DRAM(), + memblock_end_of_DRAM() - memblock_start_of_DRAM()); } start = PHYS_OFFSET; @@ -854,13 +852,6 @@ static void __init reserve_crashkernel(void) static inline void reserve_crashkernel(void) {} #endif /* CONFIG_KEXEC */ -static int __init meminfo_cmp(const void *_a, const void *_b) -{ - const struct membank *a = _a, *b = _b; - long cmp = bank_pfn_start(a) - bank_pfn_start(b); - return cmp < 0 ? -1 : cmp > 0 ? 1 : 0; -} - void __init hyp_mode_check(void) { #ifdef CONFIG_ARM_VIRT_EXT @@ -903,12 +894,10 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); - sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL); - early_paging_init(mdesc, lookup_processor_type(read_cpuid_id())); setup_dma_zone(mdesc); sanity_check_meminfo(); - arm_memblock_init(&meminfo, mdesc); + arm_memblock_init(mdesc); paging_init(mdesc); request_standard_resources(mdesc); diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index b907d9b790ab..1b880db2a033 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -127,6 +127,10 @@ ENDPROC(cpu_resume_after_mmu) .align ENTRY(cpu_resume) ARM_BE8(setend be) @ ensure we are in BE mode +#ifdef CONFIG_ARM_VIRT_EXT + bl __hyp_stub_install_secondary +#endif + safe_svcmode_maskall r1 mov r1, #0 ALT_SMP(mrc p15, 0, r0, c0, c0, 5) ALT_UP_B(1f) @@ -144,7 +148,6 @@ ARM_BE8(setend be) @ ensure we are in BE mode ldr r0, [r0, #SLEEP_SAVE_SP_PHYS] ldr r0, [r0, r1, lsl #2] - setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off @ load phys pgd, stack, resume fn ARM( ldmia r0!, {r1, sp, pc} ) THUMB( ldmia r0!, {r1, r2, r3} ) diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c index af4e8c8a5422..f065eb05d254 100644 --- a/arch/arm/kernel/stacktrace.c +++ b/arch/arm/kernel/stacktrace.c @@ -3,6 +3,7 @@ #include <linux/stacktrace.h> #include <asm/stacktrace.h> +#include <asm/traps.h> #if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) /* @@ -61,6 +62,7 @@ EXPORT_SYMBOL(walk_stackframe); #ifdef CONFIG_STACKTRACE struct stack_trace_data { struct stack_trace *trace; + unsigned long last_pc; unsigned int no_sched_functions; unsigned int skip; }; @@ -69,6 +71,7 @@ static int save_trace(struct stackframe *frame, void *d) { struct stack_trace_data *data = d; struct stack_trace *trace = data->trace; + struct pt_regs *regs; unsigned long addr = frame->pc; if (data->no_sched_functions && in_sched_functions(addr)) @@ -80,16 +83,39 @@ static int save_trace(struct stackframe *frame, void *d) trace->entries[trace->nr_entries++] = addr; + if (trace->nr_entries >= trace->max_entries) + return 1; + + /* + * in_exception_text() is designed to test if the PC is one of + * the functions which has an exception stack above it, but + * unfortunately what is in frame->pc is the return LR value, + * not the saved PC value. So, we need to track the previous + * frame PC value when doing this. + */ + addr = data->last_pc; + data->last_pc = frame->pc; + if (!in_exception_text(addr)) + return 0; + + regs = (struct pt_regs *)frame->sp; + + trace->entries[trace->nr_entries++] = regs->ARM_pc; + return trace->nr_entries >= trace->max_entries; } -void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) +/* This must be noinline to so that our skip calculation works correctly */ +static noinline void __save_stack_trace(struct task_struct *tsk, + struct stack_trace *trace, unsigned int nosched) { struct stack_trace_data data; struct stackframe frame; data.trace = trace; + data.last_pc = ULONG_MAX; data.skip = trace->skip; + data.no_sched_functions = nosched; if (tsk != current) { #ifdef CONFIG_SMP @@ -102,7 +128,6 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) trace->entries[trace->nr_entries++] = ULONG_MAX; return; #else - data.no_sched_functions = 1; frame.fp = thread_saved_fp(tsk); frame.sp = thread_saved_sp(tsk); frame.lr = 0; /* recovered from the stack */ @@ -111,11 +136,12 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) } else { register unsigned long current_sp asm ("sp"); - data.no_sched_functions = 0; + /* We don't want this function nor the caller */ + data.skip += 2; frame.fp = (unsigned long)__builtin_frame_address(0); frame.sp = current_sp; frame.lr = (unsigned long)__builtin_return_address(0); - frame.pc = (unsigned long)save_stack_trace_tsk; + frame.pc = (unsigned long)__save_stack_trace; } walk_stackframe(&frame, save_trace, &data); @@ -123,9 +149,33 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) trace->entries[trace->nr_entries++] = ULONG_MAX; } +void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace) +{ + struct stack_trace_data data; + struct stackframe frame; + + data.trace = trace; + data.skip = trace->skip; + data.no_sched_functions = 0; + + frame.fp = regs->ARM_fp; + frame.sp = regs->ARM_sp; + frame.lr = regs->ARM_lr; + frame.pc = regs->ARM_pc; + + walk_stackframe(&frame, save_trace, &data); + if (trace->nr_entries < trace->max_entries) + trace->entries[trace->nr_entries++] = ULONG_MAX; +} + +void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) +{ + __save_stack_trace(tsk, trace, 1); +} + void save_stack_trace(struct stack_trace *trace) { - save_stack_trace_tsk(current, trace); + __save_stack_trace(current, trace, 0); } EXPORT_SYMBOL_GPL(save_stack_trace); #endif diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 71e1fec6d31a..3997c411c140 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -91,13 +91,13 @@ static void __init parse_dt_topology(void) { const struct cpu_efficiency *cpu_eff; struct device_node *cn = NULL; - unsigned long min_capacity = (unsigned long)(-1); + unsigned long min_capacity = ULONG_MAX; unsigned long max_capacity = 0; unsigned long capacity = 0; - int alloc_size, cpu = 0; + int cpu = 0; - alloc_size = nr_cpu_ids * sizeof(*__cpu_capacity); - __cpu_capacity = kzalloc(alloc_size, GFP_NOWAIT); + __cpu_capacity = kcalloc(nr_cpu_ids, sizeof(*__cpu_capacity), + GFP_NOWAIT); for_each_possible_cpu(cpu) { const u32 *rate; diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index cb791ac6a003..e67682f02cb2 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -31,7 +31,7 @@ #warning Your compiler does not have EABI support. #warning ARM unwind is known to compile only with EABI compilers. #warning Change compiler or disable ARM_UNWIND option. -#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2) +#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2) && !defined(__clang__) #warning Your compiler is too buggy; it is known to not compile ARM unwind support. #warning Change compiler or disable ARM_UNWIND option. #endif diff --git a/arch/arm/kernel/uprobes.c b/arch/arm/kernel/uprobes.c index f9bacee973bf..56adf9c1fde0 100644 --- a/arch/arm/kernel/uprobes.c +++ b/arch/arm/kernel/uprobes.c @@ -113,6 +113,26 @@ int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, return 0; } +void arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr, + void *src, unsigned long len) +{ + void *xol_page_kaddr = kmap_atomic(page); + void *dst = xol_page_kaddr + (vaddr & ~PAGE_MASK); + + preempt_disable(); + + /* Initialize the slot */ + memcpy(dst, src, len); + + /* flush caches (dcache/icache) */ + flush_uprobe_xol_access(page, vaddr, dst, len); + + preempt_enable(); + + kunmap_atomic(xol_page_kaddr); +} + + int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) { struct uprobe_task *utask = current->utask; diff --git a/arch/arm/mach-at91/sysirq_mask.c b/arch/arm/mach-at91/sysirq_mask.c index 2ba694f9626b..f8bc3511a8c8 100644 --- a/arch/arm/mach-at91/sysirq_mask.c +++ b/arch/arm/mach-at91/sysirq_mask.c @@ -25,24 +25,28 @@ #include "generic.h" -#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ -#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ +#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ +#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ +#define AT91_RTC_IRQ_MASK 0x1f /* Available IRQs mask */ void __init at91_sysirq_mask_rtc(u32 rtc_base) { void __iomem *base; - u32 mask; base = ioremap(rtc_base, 64); if (!base) return; - mask = readl_relaxed(base + AT91_RTC_IMR); - if (mask) { - pr_info("AT91: Disabling rtc irq\n"); - writel_relaxed(mask, base + AT91_RTC_IDR); - (void)readl_relaxed(base + AT91_RTC_IMR); /* flush */ - } + /* + * sam9x5 SoCs have the following errata: + * "RTC: Interrupt Mask Register cannot be used + * Interrupt Mask Register read always returns 0." + * + * Hence we're not relying on IMR values to disable + * interrupts. + */ + writel_relaxed(AT91_RTC_IRQ_MASK, base + AT91_RTC_IDR); + (void)readl_relaxed(base + AT91_RTC_IMR); /* flush */ iounmap(base); } diff --git a/arch/arm/mach-bcm/bcm_5301x.c b/arch/arm/mach-bcm/bcm_5301x.c index edff69761e04..e9bcbdbce555 100644 --- a/arch/arm/mach-bcm/bcm_5301x.c +++ b/arch/arm/mach-bcm/bcm_5301x.c @@ -43,19 +43,14 @@ static void __init bcm5301x_init_early(void) "imprecise external abort"); } -static void __init bcm5301x_dt_init(void) -{ - l2x0_of_init(0, ~0UL); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char __initconst *bcm5301x_dt_compat[] = { "brcm,bcm4708", NULL, }; DT_MACHINE_START(BCM5301X, "BCM5301X") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_early = bcm5301x_init_early, - .init_machine = bcm5301x_dt_init, .dt_compat = bcm5301x_dt_compat, MACHINE_END diff --git a/arch/arm/mach-berlin/berlin.c b/arch/arm/mach-berlin/berlin.c index 025bcb5473eb..ac181c6797ee 100644 --- a/arch/arm/mach-berlin/berlin.c +++ b/arch/arm/mach-berlin/berlin.c @@ -18,16 +18,6 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> -static void __init berlin_init_machine(void) -{ - /* - * with DT probing for L2CCs, berlin_init_machine can be removed. - * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc - */ - l2x0_of_init(0x70c00000, 0xfeffffff); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char * const berlin_dt_compat[] = { "marvell,berlin", NULL, @@ -35,5 +25,10 @@ static const char * const berlin_dt_compat[] = { DT_MACHINE_START(BERLIN_DT, "Marvell Berlin") .dt_compat = berlin_dt_compat, - .init_machine = berlin_init_machine, + /* + * with DT probing for L2CCs, berlin_init_machine can be removed. + * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc + */ + .l2c_aux_val = 0x30c00000, + .l2c_aux_mask = 0xfeffffff, MACHINE_END diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c index 221b9de32dd6..94a7add88a3f 100644 --- a/arch/arm/mach-clps711x/board-clep7312.c +++ b/arch/arm/mach-clps711x/board-clep7312.c @@ -18,6 +18,7 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/string.h> +#include <linux/memblock.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -26,11 +27,9 @@ #include "common.h" static void __init -fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi) +fixup_clep7312(struct tag *tags, char **cmdline) { - mi->nr_banks=1; - mi->bank[0].start = 0xc0000000; - mi->bank[0].size = 0x01000000; + memblock_add(0xc0000000, 0x01000000); } MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c index 077609841f14..f9828f89972a 100644 --- a/arch/arm/mach-clps711x/board-edb7211.c +++ b/arch/arm/mach-clps711x/board-edb7211.c @@ -16,6 +16,7 @@ #include <linux/interrupt.h> #include <linux/backlight.h> #include <linux/platform_device.h> +#include <linux/memblock.h> #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> @@ -133,7 +134,7 @@ static void __init edb7211_reserve(void) } static void __init -fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) +fixup_edb7211(struct tag *tags, char **cmdline) { /* * Bank start addresses are not present in the information @@ -143,11 +144,8 @@ fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) * Banks sizes _are_ present in the param block, but we're * not using that information yet. */ - mi->bank[0].start = 0xc0000000; - mi->bank[0].size = SZ_8M; - mi->bank[1].start = 0xc1000000; - mi->bank[1].size = SZ_8M; - mi->nr_banks = 2; + memblock_add(0xc0000000, SZ_8M); + memblock_add(0xc1000000, SZ_8M); } static void __init edb7211_init(void) diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c index 67b733744ed7..0cf0e51e6546 100644 --- a/arch/arm/mach-clps711x/board-p720t.c +++ b/arch/arm/mach-clps711x/board-p720t.c @@ -295,7 +295,7 @@ static struct generic_bl_info p720t_lcd_backlight_pdata = { }; static void __init -fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi) +fixup_p720t(struct tag *tag, char **cmdline) { /* * Our bootloader doesn't setup any tags (yet). diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 2ae28a69e3e5..f85449a6accd 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -272,9 +272,9 @@ void __init cns3xxx_l2x0_init(void) * * 1 cycle of latency for setup, read and write accesses */ - val = readl(base + L2X0_TAG_LATENCY_CTRL); + val = readl(base + L310_TAG_LATENCY_CTRL); val &= 0xfffff888; - writel(val, base + L2X0_TAG_LATENCY_CTRL); + writel(val, base + L310_TAG_LATENCY_CTRL); /* * Data RAM Control register @@ -285,12 +285,12 @@ void __init cns3xxx_l2x0_init(void) * * 1 cycle of latency for setup, read and write accesses */ - val = readl(base + L2X0_DATA_LATENCY_CTRL); + val = readl(base + L310_DATA_LATENCY_CTRL); val &= 0xfffff888; - writel(val, base + L2X0_DATA_LATENCY_CTRL); + writel(val, base + L310_DATA_LATENCY_CTRL); /* 32 KiB, 8-way, parity disable */ - l2x0_init(base, 0x00540000, 0xfe000fff); + l2x0_init(base, 0x00500000, 0xfe0f0fff); } #endif /* CONFIG_CACHE_L2X0 */ diff --git a/arch/arm/mach-ep93xx/crunch-bits.S b/arch/arm/mach-ep93xx/crunch-bits.S index 0ec9bb48fab9..e96923a3017b 100644 --- a/arch/arm/mach-ep93xx/crunch-bits.S +++ b/arch/arm/mach-ep93xx/crunch-bits.S @@ -16,6 +16,7 @@ #include <asm/ptrace.h> #include <asm/thread_info.h> #include <asm/asm-offsets.h> +#include <asm/assembler.h> #include <mach/ep93xx-regs.h> /* @@ -62,14 +63,16 @@ * r9 = ret_from_exception * lr = undefined instr exit * - * called from prefetch exception handler with interrupts disabled + * called from prefetch exception handler with interrupts enabled */ ENTRY(crunch_task_enable) + inc_preempt_count r10, r3 + ldr r8, =(EP93XX_APB_VIRT_BASE + 0x00130000) @ syscon addr ldr r1, [r8, #0x80] tst r1, #0x00800000 @ access to crunch enabled? - movne pc, lr @ if so no business here + bne 2f @ if so no business here mov r3, #0xaa @ unlock syscon swlock str r3, [r8, #0xc0] orr r1, r1, #0x00800000 @ enable access to crunch @@ -142,7 +145,7 @@ crunch_save: teq r0, #0 @ anything to load? cfldr64eq mvdx0, [r1, #CRUNCH_MVDX0] @ mvdx0 was clobbered - moveq pc, lr + beq 1f crunch_load: cfldr64 mvdx0, [r0, #CRUNCH_DSPSC] @ load status word @@ -190,6 +193,11 @@ crunch_load: cfldr64 mvdx14, [r0, #CRUNCH_MVDX14] cfldr64 mvdx15, [r0, #CRUNCH_MVDX15] +1: +#ifdef CONFIG_PREEMPT_COUNT + get_thread_info r10 +#endif +2: dec_preempt_count r10, r3 mov pc, lr /* diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 80b90e346ca0..16617bdb37a9 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -153,7 +153,6 @@ enum sys_powerdown { NUM_SYS_POWERDOWN, }; -extern unsigned long l2x0_regs_phys; struct exynos_pmu_conf { void __iomem *reg; unsigned int val[NUM_SYS_POWERDOWN]; diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index bc43e22693b7..90aab4d75d08 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -30,9 +30,6 @@ #include "mfc.h" #include "regs-pmu.h" -#define L2_AUX_VAL 0x7C470001 -#define L2_AUX_MASK 0xC200ffff - static struct map_desc exynos4_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -202,7 +199,7 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, { struct map_desc iodesc; __be32 *reg; - unsigned long len; + int len; if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") && !of_flat_dt_is_compatible(node, "samsung,exynos5440-clock")) @@ -246,25 +243,6 @@ void __init exynos_init_io(void) exynos_map_io(); } -static int __init exynos4_l2x0_cache_init(void) -{ - int ret; - - if (!soc_is_exynos4()) - return 0; - - ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK); - if (ret) - return ret; - - if (IS_ENABLED(CONFIG_S5P_SLEEP)) { - l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); - clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); - } - return 0; -} -early_initcall(exynos4_l2x0_cache_init); - static void __init exynos_dt_machine_init(void) { struct device_node *i2c_np; @@ -333,6 +311,8 @@ static void __init exynos_reserve(void) DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .l2c_aux_val = 0x3c400001, + .l2c_aux_mask = 0xc20fffff, .smp = smp_ops(exynos_smp_ops), .map_io = exynos_init_io, .init_early = exynos_firmware_init, diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S index a2613e944e10..108a45f4bb62 100644 --- a/arch/arm/mach-exynos/sleep.S +++ b/arch/arm/mach-exynos/sleep.S @@ -16,8 +16,6 @@ */ #include <linux/linkage.h> -#include <asm/asm-offsets.h> -#include <asm/hardware/cache-l2x0.h> #define CPU_MASK 0xff0ffff0 #define CPU_CORTEX_A9 0x410fc090 @@ -53,33 +51,7 @@ ENTRY(exynos_cpu_resume) and r0, r0, r1 ldr r1, =CPU_CORTEX_A9 cmp r0, r1 - bne skip_l2_resume - adr r0, l2x0_regs_phys - ldr r0, [r0] - cmp r0, #0 - beq skip_l2_resume - ldr r1, [r0, #L2X0_R_PHY_BASE] - ldr r2, [r1, #L2X0_CTRL] - tst r2, #0x1 - bne skip_l2_resume - ldr r2, [r0, #L2X0_R_AUX_CTRL] - str r2, [r1, #L2X0_AUX_CTRL] - ldr r2, [r0, #L2X0_R_TAG_LATENCY] - str r2, [r1, #L2X0_TAG_LATENCY_CTRL] - ldr r2, [r0, #L2X0_R_DATA_LATENCY] - str r2, [r1, #L2X0_DATA_LATENCY_CTRL] - ldr r2, [r0, #L2X0_R_PREFETCH_CTRL] - str r2, [r1, #L2X0_PREFETCH_CTRL] - ldr r2, [r0, #L2X0_R_PWR_CTRL] - str r2, [r1, #L2X0_POWER_CTRL] - mov r2, #1 - str r2, [r1, #L2X0_CTRL] -skip_l2_resume: + bleq l2c310_early_resume #endif b cpu_resume ENDPROC(exynos_cpu_resume) -#ifdef CONFIG_CACHE_L2X0 - .globl l2x0_regs_phys -l2x0_regs_phys: - .long 0 -#endif diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index da0415094856..8f05489671b7 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -76,7 +76,7 @@ __initcall(cats_hw_init); * hard reboots fail on early boards. */ static void __init -fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi) +fixup_cats(struct tag *tags, char **cmdline) { #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) screen_info.orig_video_lines = 25; diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index eb1fa5c84723..cdee08c6d239 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -620,7 +620,7 @@ __initcall(nw_hw_init); * the parameter page. */ static void __init -fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi) +fixup_netwinder(struct tag *tags, char **cmdline) { #ifdef CONFIG_ISAPNP extern int isapnp_disable; diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index c7de89b263dd..8c35ae4ff176 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -51,11 +51,13 @@ static void __init highbank_scu_map_io(void) } -static void highbank_l2x0_disable(void) +static void highbank_l2c310_write_sec(unsigned long val, unsigned reg) { - outer_flush_all(); - /* Disable PL310 L2 Cache controller */ - highbank_smc1(0x102, 0x0); + if (reg == L2X0_CTRL) + highbank_smc1(0x102, val); + else + WARN_ONCE(1, "Highbank L2C310: ignoring write to reg 0x%x\n", + reg); } static void __init highbank_init_irq(void) @@ -64,14 +66,6 @@ static void __init highbank_init_irq(void) if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9")) highbank_scu_map_io(); - - /* Enable PL310 L2 Cache controller */ - if (IS_ENABLED(CONFIG_CACHE_L2X0) && - of_find_compatible_node(NULL, NULL, "arm,pl310-cache")) { - highbank_smc1(0x102, 0x1); - l2x0_of_init(0, ~0UL); - outer_cache.disable = highbank_l2x0_disable; - } } static void highbank_power_off(void) @@ -185,6 +179,9 @@ DT_MACHINE_START(HIGHBANK, "Highbank") #if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) .dma_zone_size = (4ULL * SZ_1G), #endif + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .l2c_write_sec = highbank_l2c310_write_sec, .init_irq = highbank_init_irq, .init_machine = highbank_init, .dt_compat = highbank_match, diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index a4d5e425cd82..71c86a2f856d 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -289,14 +289,12 @@ int __init mx35_clocks_init(void) return 0; } -static int __init mx35_clocks_init_dt(struct device_node *ccm_node) +static void __init mx35_clocks_init_dt(struct device_node *ccm_node) { clk_data.clks = clk; clk_data.clk_num = ARRAY_SIZE(clk); of_clk_add_provider(ccm_node, of_clk_src_onecell_get, &clk_data); mx35_clocks_init(); - - return 0; } CLK_OF_DECLARE(imx35, "fsl,imx35-ccm", mx35_clocks_init_dt); diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c index 2d8aef5a6efa..c44602758120 100644 --- a/arch/arm/mach-imx/mach-vf610.c +++ b/arch/arm/mach-imx/mach-vf610.c @@ -20,19 +20,14 @@ static void __init vf610_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static void __init vf610_init_irq(void) -{ - l2x0_of_init(0, ~0UL); - irqchip_init(); -} - static const char *vf610_dt_compat[] __initconst = { "fsl,vf610", NULL, }; DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)") - .init_irq = vf610_init_irq, + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_machine = vf610_init_machine, .dt_compat = vf610_dt_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 20048ff05739..fe123b079c05 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -334,28 +334,10 @@ ENDPROC(imx6_suspend) * turned into relative ones. */ -#ifdef CONFIG_CACHE_L2X0 - .macro pl310_resume - adr r0, l2x0_saved_regs_offset - ldr r2, [r0] - add r2, r2, r0 - ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0 - ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value - str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl - mov r1, #0x1 - str r1, [r0, #L2X0_CTRL] @ re-enable L2 - .endm - -l2x0_saved_regs_offset: - .word l2x0_saved_regs - . - -#else - .macro pl310_resume - .endm -#endif - ENTRY(v7_cpu_resume) bl v7_invalidate_l1 - pl310_resume +#ifdef CONFIG_CACHE_L2X0 + bl l2c310_early_resume +#endif b cpu_resume ENDPROC(v7_cpu_resume) diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 5e3027d3692f..3b0733edb68c 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -124,7 +124,7 @@ void __init imx_init_l2cache(void) } /* Configure the L2 PREFETCH and POWER registers */ - val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); + val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL); val |= 0x70800000; /* * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 @@ -137,14 +137,12 @@ void __init imx_init_l2cache(void) */ if (cpu_is_imx6q()) val &= ~(1 << 30 | 1 << 23); - writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL); - val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN; - writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL); + writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL); iounmap(l2x0_base); of_node_put(np); out: - l2x0_of_init(0, ~0UL); + l2x0_of_init(0, ~0); } #endif diff --git a/arch/arm/mach-iop13xx/include/mach/irqs.h b/arch/arm/mach-iop13xx/include/mach/irqs.h index 054e7acb5bfa..e8d24d32121a 100644 --- a/arch/arm/mach-iop13xx/include/mach/irqs.h +++ b/arch/arm/mach-iop13xx/include/mach/irqs.h @@ -191,6 +191,4 @@ static inline u32 read_intpnd_3(void) #define NR_IOP13XX_IRQS (IRQ_IOP13XX_HPI + 1) #endif -#define NR_IRQS NR_IOP13XX_IRQS - #endif /* _IOP13XX_IRQ_H_ */ diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h index f1c00d6d560b..15bc9bb78a6b 100644 --- a/arch/arm/mach-iop13xx/include/mach/time.h +++ b/arch/arm/mach-iop13xx/include/mach/time.h @@ -1,5 +1,8 @@ #ifndef _IOP13XX_TIME_H_ #define _IOP13XX_TIME_H_ + +#include <mach/irqs.h> + #define IRQ_IOP_TIMER0 IRQ_IOP13XX_TIMER0 #define IOP_TMR_EN 0x02 diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index 02a8228ac2d3..9cd07d396093 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -93,4 +93,5 @@ MACHINE_START(IQ81340MC, "Intel IQ81340MC") .init_time = iq81340mc_timer_init, .init_machine = iq81340mc_init, .restart = iop13xx_restart, + .nr_irqs = NR_IOP13XX_IRQS, MACHINE_END diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index 1b80f10722b3..b3ec11cb707e 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -95,4 +95,5 @@ MACHINE_START(IQ81340SC, "Intel IQ81340SC") .init_time = iq81340sc_timer_init, .init_machine = iq81340sc_init, .restart = iop13xx_restart, + .nr_irqs = NR_IOP13XX_IRQS, MACHINE_END diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c index 560d5b2dec22..e7730cf9c15d 100644 --- a/arch/arm/mach-iop13xx/msi.c +++ b/arch/arm/mach-iop13xx/msi.c @@ -23,10 +23,7 @@ #include <linux/msi.h> #include <asm/mach/irq.h> #include <asm/irq.h> - - -#define IOP13XX_NUM_MSI_IRQS 128 -static DECLARE_BITMAP(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS); +#include <mach/irqs.h> /* IMIPR0 CP6 R8 Page 1 */ @@ -121,41 +118,6 @@ void __init iop13xx_msi_init(void) irq_set_chained_handler(IRQ_IOP13XX_INBD_MSI, iop13xx_msi_handler); } -/* - * Dynamic irq allocate and deallocation - */ -int create_irq(void) -{ - int irq, pos; - -again: - pos = find_first_zero_bit(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS); - irq = IRQ_IOP13XX_MSI_0 + pos; - if (irq > NR_IRQS) - return -ENOSPC; - /* test_and_set_bit operates on 32-bits at a time */ - if (test_and_set_bit(pos, msi_irq_in_use)) - goto again; - - dynamic_irq_init(irq); - - return irq; -} - -void destroy_irq(unsigned int irq) -{ - int pos = irq - IRQ_IOP13XX_MSI_0; - - dynamic_irq_cleanup(irq); - - clear_bit(pos, msi_irq_in_use); -} - -void arch_teardown_msi_irq(unsigned int irq) -{ - destroy_irq(irq); -} - static void iop13xx_msi_nop(struct irq_data *d) { return; @@ -172,12 +134,17 @@ static struct irq_chip iop13xx_msi_chip = { int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) { - int id, irq = create_irq(); + int id, irq = irq_alloc_desc_from(IRQ_IOP13XX_MSI_0, -1); struct msi_msg msg; if (irq < 0) return irq; + if (irq >= NR_IOP13XX_IRQS) { + irq_free_desc(irq); + return -ENOSPC; + } + irq_set_msi_desc(irq, desc); msg.address_hi = 0x0; @@ -191,3 +158,8 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) return 0; } + +void arch_teardown_msi_irq(unsigned int irq) +{ + irq_free_desc(irq); +} diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index 96e6c7a6793b..bca96f433495 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -27,6 +27,7 @@ #include <mach/hardware.h> #include <asm/irq.h> #include <asm/hardware/iop_adma.h> +#include <mach/irqs.h> #define IOP13XX_UART_XTAL 33334000 #define IOP13XX_SETUP_DEBUG 0 diff --git a/arch/arm/mach-iop13xx/tpmi.c b/arch/arm/mach-iop13xx/tpmi.c index 6fdad7a0425a..db511ec2b1df 100644 --- a/arch/arm/mach-iop13xx/tpmi.c +++ b/arch/arm/mach-iop13xx/tpmi.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <asm/irq.h> #include <asm/sizes.h> +#include <mach/irqs.h> /* assumes CONTROLLER_ONLY# is never asserted in the ESSR register */ #define IOP13XX_TPMI_MMR(dev) IOP13XX_REG_ADDR32_PHYS(0x48000 + (dev << 12)) diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index e0b9e1b9cf30..7f352de26099 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -14,60 +14,100 @@ #include <linux/init.h> #include <linux/of_platform.h> #include <linux/of_address.h> +#include <linux/memblock.h> #include <asm/setup.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/smp_plat.h> +#include <asm/memory.h> -#include "keystone.h" +#include "memory.h" -#define PLL_RESET_WRITE_KEY_MASK 0xffff0000 -#define PLL_RESET_WRITE_KEY 0x5a69 -#define PLL_RESET BIT(16) +#include "keystone.h" -static void __iomem *keystone_rstctrl; +static struct notifier_block platform_nb; +static unsigned long keystone_dma_pfn_offset __read_mostly; -static void __init keystone_init(void) +static int keystone_platform_notifier(struct notifier_block *nb, + unsigned long event, void *data) { - struct device_node *node; + struct device *dev = data; - node = of_find_compatible_node(NULL, NULL, "ti,keystone-reset"); - if (WARN_ON(!node)) - pr_warn("ti,keystone-reset node undefined\n"); + if (event != BUS_NOTIFY_ADD_DEVICE) + return NOTIFY_DONE; - keystone_rstctrl = of_iomap(node, 0); - if (WARN_ON(!keystone_rstctrl)) - pr_warn("ti,keystone-reset iomap error\n"); + if (!dev) + return NOTIFY_BAD; + if (!dev->of_node) { + dev->dma_pfn_offset = keystone_dma_pfn_offset; + dev_err(dev, "set dma_pfn_offset%08lx\n", + dev->dma_pfn_offset); + } + return NOTIFY_OK; +} + +static void __init keystone_init(void) +{ keystone_pm_runtime_init(); + if (platform_nb.notifier_call) + bus_register_notifier(&platform_bus_type, &platform_nb); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const char *keystone_match[] __initconst = { - "ti,keystone", - NULL, -}; +static phys_addr_t keystone_virt_to_idmap(unsigned long x) +{ + return (phys_addr_t)(x) - CONFIG_PAGE_OFFSET + KEYSTONE_LOW_PHYS_START; +} -void keystone_restart(enum reboot_mode mode, const char *cmd) +static void __init keystone_init_meminfo(void) { - u32 val; + bool lpae = IS_ENABLED(CONFIG_ARM_LPAE); + bool pvpatch = IS_ENABLED(CONFIG_ARM_PATCH_PHYS_VIRT); + phys_addr_t offset = PHYS_OFFSET - KEYSTONE_LOW_PHYS_START; + phys_addr_t mem_start, mem_end; + + mem_start = memblock_start_of_DRAM(); + mem_end = memblock_end_of_DRAM(); + + /* nothing to do if we are running out of the <32-bit space */ + if (mem_start >= KEYSTONE_LOW_PHYS_START && + mem_end <= KEYSTONE_LOW_PHYS_END) + return; + + if (!lpae || !pvpatch) { + pr_crit("Enable %s%s%s to run outside 32-bit space\n", + !lpae ? __stringify(CONFIG_ARM_LPAE) : "", + (!lpae && !pvpatch) ? " and " : "", + !pvpatch ? __stringify(CONFIG_ARM_PATCH_PHYS_VIRT) : ""); + } + + if (mem_start < KEYSTONE_HIGH_PHYS_START || + mem_end > KEYSTONE_HIGH_PHYS_END) { + pr_crit("Invalid address space for memory (%08llx-%08llx)\n", + (u64)mem_start, (u64)mem_end); + } - BUG_ON(!keystone_rstctrl); + offset += KEYSTONE_HIGH_PHYS_START; + __pv_phys_pfn_offset = PFN_DOWN(offset); + __pv_offset = (offset - PAGE_OFFSET); - /* Enable write access to RSTCTRL */ - val = readl(keystone_rstctrl); - val &= PLL_RESET_WRITE_KEY_MASK; - val |= PLL_RESET_WRITE_KEY; - writel(val, keystone_rstctrl); + /* Populate the arch idmap hook */ + arch_virt_to_idmap = keystone_virt_to_idmap; + platform_nb.notifier_call = keystone_platform_notifier; + keystone_dma_pfn_offset = PFN_DOWN(KEYSTONE_HIGH_PHYS_START - + KEYSTONE_LOW_PHYS_START); - /* Reset the SOC */ - val = readl(keystone_rstctrl); - val &= ~PLL_RESET; - writel(val, keystone_rstctrl); + pr_info("Switching to high address space at 0x%llx\n", (u64)offset); } +static const char *keystone_match[] __initconst = { + "ti,keystone", + NULL, +}; + DT_MACHINE_START(KEYSTONE, "Keystone") #if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) .dma_zone_size = SZ_2G, @@ -75,5 +115,5 @@ DT_MACHINE_START(KEYSTONE, "Keystone") .smp = smp_ops(keystone_smp_ops), .init_machine = keystone_init, .dt_compat = keystone_match, - .restart = keystone_restart, + .init_meminfo = keystone_init_meminfo, MACHINE_END diff --git a/arch/arm/mach-keystone/memory.h b/arch/arm/mach-keystone/memory.h new file mode 100644 index 000000000000..b854fb18eef1 --- /dev/null +++ b/arch/arm/mach-keystone/memory.h @@ -0,0 +1,24 @@ +/* + * Copyright 2014 Texas Instruments, Inc. + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ +#ifndef __MEMORY_H +#define __MEMORY_H + +#define MAX_PHYSMEM_BITS 36 +#define SECTION_SIZE_BITS 34 + +#define KEYSTONE_LOW_PHYS_START 0x80000000ULL +#define KEYSTONE_LOW_PHYS_SIZE 0x80000000ULL /* 2G */ +#define KEYSTONE_LOW_PHYS_END (KEYSTONE_LOW_PHYS_START + \ + KEYSTONE_LOW_PHYS_SIZE - 1) + +#define KEYSTONE_HIGH_PHYS_START 0x800000000ULL +#define KEYSTONE_HIGH_PHYS_SIZE 0x400000000ULL /* 16G */ +#define KEYSTONE_HIGH_PHYS_END (KEYSTONE_HIGH_PHYS_START + \ + KEYSTONE_HIGH_PHYS_SIZE - 1) +#endif /* __MEMORY_H */ diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c index 5cf0683577ea..5f46a7cf907b 100644 --- a/arch/arm/mach-keystone/platsmp.c +++ b/arch/arm/mach-keystone/platsmp.c @@ -17,13 +17,16 @@ #include <linux/io.h> #include <asm/smp_plat.h> +#include <asm/prom.h> +#include <asm/tlbflush.h> +#include <asm/pgtable.h> #include "keystone.h" static int keystone_smp_boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long start = virt_to_phys(&secondary_startup); + unsigned long start = virt_to_idmap(&secondary_startup); int error; pr_debug("keystone-smp: booting cpu %d, vector %08lx\n", @@ -36,6 +39,19 @@ static int keystone_smp_boot_secondary(unsigned int cpu, return error; } +#ifdef CONFIG_ARM_LPAE +static void __cpuinit keystone_smp_secondary_initmem(unsigned int cpu) +{ + pgd_t *pgd0 = pgd_offset_k(0); + cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET); + local_flush_tlb_all(); +} +#else +static inline void __cpuinit keystone_smp_secondary_initmem(unsigned int cpu) +{} +#endif + struct smp_operations keystone_smp_ops __initdata = { .smp_boot_secondary = keystone_smp_boot_secondary, + .smp_secondary_init = keystone_smp_secondary_initmem, }; diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index a77529887cbc..61bfe584a9d7 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -83,11 +83,6 @@ static void __init halibut_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init halibut_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) -{ -} - static void __init halibut_map_io(void) { msm_map_common_io(); @@ -100,7 +95,6 @@ static void __init halibut_init_late(void) MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") .atag_offset = 0x100, - .fixup = halibut_fixup, .map_io = halibut_map_io, .init_early = halibut_init_early, .init_irq = halibut_init_irq, diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c index 7d9981cb400e..873c3ca3cd7e 100644 --- a/arch/arm/mach-msm/board-mahimahi.c +++ b/arch/arm/mach-msm/board-mahimahi.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -52,16 +53,10 @@ static void __init mahimahi_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init mahimahi_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init mahimahi_fixup(struct tag *tags, char **cmdline) { - mi->nr_banks = 2; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET); - mi->bank[0].size = (219*1024*1024); - mi->bank[1].start = MSM_HIGHMEM_BASE; - mi->bank[1].node = PHYS_TO_NID(MSM_HIGHMEM_BASE); - mi->bank[1].size = MSM_HIGHMEM_SIZE; + memblock_add(PHYS_OFFSET, 219*SZ_1M); + memblock_add(MSM_HIGHMEM_BASE, MSM_HIGHMEM_SIZE); } static void __init mahimahi_map_io(void) diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 0c4c200e1221..245884319d2e 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -40,8 +40,7 @@ #include "proc_comm.h" #include "common.h" -static void __init msm7x30_fixup(struct tag *tag, char **cmdline, - struct meminfo *mi) +static void __init msm7x30_fixup(struct tag *tag, char **cmdline) { for (; tag->hdr.size; tag = tag_next(tag)) if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) { diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 327605174d63..e50967926dcd 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -35,6 +35,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/memblock.h> #include "gpio_chip.h" #include "board-sapphire.h" @@ -74,22 +75,18 @@ static struct map_desc sapphire_io_desc[] __initdata = { } }; -static void __init sapphire_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init sapphire_fixup(struct tag *tags, char **cmdline) { int smi_sz = parse_tag_smi((const struct tag *)tags); - mi->nr_banks = 1; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET); if (smi_sz == 32) { - mi->bank[0].size = (84*1024*1024); + memblock_add(PHYS_OFFSET, 84*SZ_1M); } else if (smi_sz == 64) { - mi->bank[0].size = (101*1024*1024); + memblock_add(PHYS_OFFSET, 101*SZ_1M); } else { + memblock_add(PHYS_OFFSET, 101*SZ_1M); /* Give a default value when not get smi size */ smi_sz = 64; - mi->bank[0].size = (101*1024*1024); } } diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 5edfbd904d06..f72b07de2152 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/clkdev.h> +#include <linux/memblock.h> #include <asm/system_info.h> #include <asm/mach-types.h> @@ -55,12 +56,9 @@ static void __init trout_init_irq(void) msm_init_irq(); } -static void __init trout_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init trout_fixup(struct tag *tags, char **cmdline) { - mi->nr_banks = 1; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].size = (101*1024*1024); + memblock_add(PHYS_OFFSET, 101*SZ_1M); } static void __init trout_init(void) diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 01cfce6ac20b..8bb742fdf5ca 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -78,7 +78,6 @@ static void __init mvebu_timer_and_clk_init(void) mvebu_scu_enable(); coherency_init(); BUG_ON(mvebu_mbus_dt_init(coherency_available())); - l2x0_of_init(0, ~0UL); if (of_machine_is_compatible("marvell,armada375")) hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, @@ -182,6 +181,8 @@ static const char * const armada_370_xp_dt_compat[] = { }; DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .smp = smp_ops(armada_xp_smp_ops), .init_machine = mvebu_dt_init, .init_time = mvebu_timer_and_clk_init, @@ -195,6 +196,8 @@ static const char * const armada_375_dt_compat[] = { }; DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_time = mvebu_timer_and_clk_init, .init_machine = mvebu_dt_init, .restart = mvebu_restart, @@ -208,6 +211,8 @@ static const char * const armada_38x_dt_compat[] = { }; DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_time = mvebu_timer_and_clk_init, .restart = mvebu_restart, .dt_compat = armada_38x_dt_compat, diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 4a1065e41e9c..9116ca476d7c 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -143,23 +143,16 @@ static int __init cpu8815_mmcsd_init(void) } device_initcall(cpu8815_mmcsd_init); -static void __init cpu8815_init_of(void) -{ -#ifdef CONFIG_CACHE_L2X0 - /* At full speed latency must be >=2, so 0x249 in low bits */ - l2x0_of_init(0x00730249, 0xfe000fff); -#endif - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char * cpu8815_board_compat[] = { "calaosystems,usb-s8815", NULL, }; DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815") + /* At full speed latency must be >=2, so 0x249 in low bits */ + .l2c_aux_val = 0x00700249, + .l2c_aux_mask = 0xfe0fefff, .map_io = cpu8815_map_io, - .init_machine = cpu8815_init_of, .restart = cpu8815_restart, .dt_compat = cpu8815_board_compat, MACHINE_END diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index cb31d4390d52..0ba482638ebf 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -65,6 +65,7 @@ config SOC_AM43XX select ARCH_HAS_OPP select ARM_GIC select MACH_OMAP_GENERIC + select MIGHT_HAVE_CACHE_L2X0 config SOC_DRA7XX bool "TI DRA7XX" diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 660bfc5a70d7..e2e52031f056 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -60,7 +60,8 @@ static struct pwm_lookup pwm_lookup[] = { /* LEDB -> PMU_STAT */ - PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat"), + PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat", + 7812500, PWM_POLARITY_NORMAL), }; static struct led_pwm pwm_leds[] = { diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index d88aff7baff8..ff029737c8f0 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -91,6 +91,7 @@ extern void omap3_sync32k_timer_init(void); extern void omap3_secure_sync32k_timer_init(void); extern void omap3_gptimer_timer_init(void); extern void omap4_local_timer_init(void); +int omap_l2_cache_init(void); extern void omap5_realtime_timer_init(void); void omap2420_init_early(void); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index e58609b312c7..592ba0a0ecf3 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -18,7 +18,6 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/pinctrl/machine.h> -#include <linux/platform_data/omap4-keypad.h> #include <linux/platform_data/mailbox-omap.h> #include <asm/mach-types.h> @@ -29,7 +28,6 @@ #include "iomap.h" #include "omap_hwmod.h" #include "omap_device.h" -#include "omap4-keypad.h" #include "soc.h" #include "common.h" @@ -255,37 +253,6 @@ static inline void omap_init_camera(void) #endif } -int __init omap4_keyboard_init(struct omap4_keypad_platform_data - *sdp4430_keypad_data, struct omap_board_data *bdata) -{ - struct platform_device *pdev; - struct omap_hwmod *oh; - struct omap4_keypad_platform_data *keypad_data; - unsigned int id = -1; - char *oh_name = "kbd"; - char *name = "omap4-keypad"; - - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return -ENODEV; - } - - keypad_data = sdp4430_keypad_data; - - pdev = omap_device_build(name, id, oh, keypad_data, - sizeof(struct omap4_keypad_platform_data)); - - if (IS_ERR(pdev)) { - WARN(1, "Can't build omap_device for %s:%s.\n", - name, oh->name); - return PTR_ERR(pdev); - } - oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); - - return 0; -} - #if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE) static inline void __init omap_init_mbox(void) { diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 16d33d831287..bf852d7ae951 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -279,6 +279,8 @@ static enum omapdss_version __init omap_display_get_version(void) return OMAPDSS_VER_OMAP4; else if (soc_is_omap54xx()) return OMAPDSS_VER_OMAP5; + else if (soc_is_am43xx()) + return OMAPDSS_VER_AM43xx; else return OMAPDSS_VER_UNKNOWN; } @@ -555,65 +557,9 @@ int omap_dss_reset(struct omap_hwmod *oh) return r; } -/* list of 'compatible' nodes to convert to omapdss specific */ -static const char * const dss_compat_conv_list[] __initconst = { - "composite-connector", - "dvi-connector", - "hdmi-connector", - "panel-dpi", - "panel-dsi-cm", - "sony,acx565akm", - "svideo-connector", - "ti,tfp410", - "ti,tpd12s015", -}; - -/* prepend compatible string with "omapdss," */ -static __init void omapdss_omapify_node(struct device_node *node, - const char *compat) -{ - char *new_compat; - struct property *prop; - - new_compat = kasprintf(GFP_KERNEL, "omapdss,%s", compat); - - prop = kzalloc(sizeof(*prop), GFP_KERNEL); - - if (!prop) { - pr_err("omapdss_omapify_node: kzalloc failed\n"); - return; - } - - prop->name = "compatible"; - prop->value = new_compat; - prop->length = strlen(new_compat) + 1; - - of_update_property(node, prop); -} - -/* - * As omapdss panel drivers are omapdss specific, but we want to define the - * DT-data in generic manner, we convert the compatible strings of the panel - * nodes from "panel-foo" to "omapdss,panel-foo". This way we can have both - * correct DT data and omapdss specific drivers. - * - * When we get generic panel drivers to the kernel, this will be removed. - */ void __init omapdss_early_init_of(void) { - int i; - - for (i = 0; i < ARRAY_SIZE(dss_compat_conv_list); ++i) { - const char *compat = dss_compat_conv_list[i]; - struct device_node *node = NULL; - - while ((node = of_find_compatible_node(node, NULL, compat))) { - if (!of_device_is_available(node)) - continue; - omapdss_omapify_node(node, compat); - } - } } struct device_node * __init omapdss_find_dss_of_node(void) @@ -632,6 +578,10 @@ struct device_node * __init omapdss_find_dss_of_node(void) if (node) return node; + node = of_find_compatible_node(NULL, NULL, "ti,omap5-dss"); + if (node) + return node; + return NULL; } diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 852b19a367f0..2c0c2816900f 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -68,6 +68,9 @@ #define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */ #define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */ #define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_4 0x300 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_5 0x304 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_6 0x308 /* not available on OMAP2 */ /* GPMC ECC control settings */ #define GPMC_ECC_CTRL_ECCCLEAR 0x100 @@ -677,6 +680,12 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) GPMC_BCH_SIZE * i; reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result4[i] = gpmc_base + GPMC_ECC_BCH_RESULT_4 + + i * GPMC_BCH_SIZE; + reg->gpmc_bch_result5[i] = gpmc_base + GPMC_ECC_BCH_RESULT_5 + + i * GPMC_BCH_SIZE; + reg->gpmc_bch_result6[i] = gpmc_base + GPMC_ECC_BCH_RESULT_6 + + i * GPMC_BCH_SIZE; } } @@ -1412,6 +1421,12 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, else gpmc_nand_data->ecc_opt = OMAP_ECC_BCH8_CODE_HW_DETECTION_SW; + else if (!strcmp(s, "bch16")) + if (gpmc_nand_data->elm_of_node) + gpmc_nand_data->ecc_opt = + OMAP_ECC_BCH16_CODE_HW; + else + pr_err("%s: BCH16 requires ELM support\n", __func__); else pr_err("%s: ti,nand-ecc-opt invalid value\n", __func__); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 4ec3b4a93843..8f559450c876 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -609,6 +609,7 @@ void __init am43xx_init_early(void) am43xx_clockdomains_init(); am43xx_hwmod_init(); omap_hwmod_init_postsetup(); + omap_l2_cache_init(); omap_clk_soc_init = am43xx_dt_clk_init; } @@ -640,6 +641,7 @@ void __init omap4430_init_early(void) omap44xx_clockdomains_init(); omap44xx_hwmod_init(); omap_hwmod_init_postsetup(); + omap_l2_cache_init(); omap_clk_soc_init = omap4xxx_dt_clk_init; } diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index eb76e47091ad..4001325f90fb 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -187,19 +187,15 @@ static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state) * in every restore MPUSS OFF path. */ #ifdef CONFIG_CACHE_L2X0 -static void save_l2x0_context(void) +static void __init save_l2x0_context(void) { - u32 val; - void __iomem *l2x0_base = omap4_get_l2cache_base(); - if (l2x0_base) { - val = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); - writel_relaxed(val, sar_base + L2X0_AUXCTRL_OFFSET); - val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); - writel_relaxed(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET); - } + writel_relaxed(l2x0_saved_regs.aux_ctrl, + sar_base + L2X0_AUXCTRL_OFFSET); + writel_relaxed(l2x0_saved_regs.prefetch_ctrl, + sar_base + L2X0_PREFETCH_CTRL_OFFSET); } #else -static void save_l2x0_context(void) +static void __init save_l2x0_context(void) {} #endif diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 99b0154493a4..326cd982a3cb 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -167,75 +167,57 @@ void __iomem *omap4_get_l2cache_base(void) return l2cache_base; } -static void omap4_l2x0_disable(void) +static void omap4_l2c310_write_sec(unsigned long val, unsigned reg) { - outer_flush_all(); - /* Disable PL310 L2 Cache controller */ - omap_smc1(0x102, 0x0); -} + unsigned smc_op; -static void omap4_l2x0_set_debug(unsigned long val) -{ - /* Program PL310 L2 Cache controller debug register */ - omap_smc1(0x100, val); + switch (reg) { + case L2X0_CTRL: + smc_op = OMAP4_MON_L2X0_CTRL_INDEX; + break; + + case L2X0_AUX_CTRL: + smc_op = OMAP4_MON_L2X0_AUXCTRL_INDEX; + break; + + case L2X0_DEBUG_CTRL: + smc_op = OMAP4_MON_L2X0_DBG_CTRL_INDEX; + break; + + case L310_PREFETCH_CTRL: + smc_op = OMAP4_MON_L2X0_PREFETCH_INDEX; + break; + + default: + WARN_ONCE(1, "OMAP L2C310: ignoring write to reg 0x%x\n", reg); + return; + } + + omap_smc1(smc_op, val); } -static int __init omap_l2_cache_init(void) +int __init omap_l2_cache_init(void) { - u32 aux_ctrl = 0; - - /* - * To avoid code running on other OMAPs in - * multi-omap builds - */ - if (!cpu_is_omap44xx()) - return -ENODEV; + u32 aux_ctrl; /* Static mapping, never released */ l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K); if (WARN_ON(!l2cache_base)) return -ENOMEM; - /* - * 16-way associativity, parity disabled - * Way size - 32KB (es1.0) - * Way size - 64KB (es2.0 +) - */ - aux_ctrl = ((1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT) | - (0x1 << 25) | - (0x1 << L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT) | - (0x1 << L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT)); - - if (omap_rev() == OMAP4430_REV_ES1_0) { - aux_ctrl |= 0x2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT; - } else { - aux_ctrl |= ((0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) | - (1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) | - (1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) | - (1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) | - (1 << L2X0_AUX_CTRL_EARLY_BRESP_SHIFT)); - } - if (omap_rev() != OMAP4430_REV_ES1_0) - omap_smc1(0x109, aux_ctrl); - - /* Enable PL310 L2 Cache controller */ - omap_smc1(0x102, 0x1); + /* 16-way associativity, parity disabled, way size - 64KB (es2.0 +) */ + aux_ctrl = L2C_AUX_CTRL_SHARED_OVERRIDE | + L310_AUX_CTRL_DATA_PREFETCH | + L310_AUX_CTRL_INSTR_PREFETCH; + outer_cache.write_sec = omap4_l2c310_write_sec; if (of_have_populated_dt()) - l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK); + l2x0_of_init(aux_ctrl, 0xcf9fffff); else - l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK); - - /* - * Override default outer_cache.disable with a OMAP4 - * specific one - */ - outer_cache.disable = omap4_l2x0_disable; - outer_cache.set_debug = omap4_l2x0_set_debug; + l2x0_init(l2cache_base, aux_ctrl, 0xcf9fffff); return 0; } -omap_early_initcall(omap_l2_cache_init); #endif void __iomem *omap4_get_sar_ram_base(void) diff --git a/arch/arm/mach-omap2/omap4-keypad.h b/arch/arm/mach-omap2/omap4-keypad.h deleted file mode 100644 index 20de0d5a7e77..000000000000 --- a/arch/arm/mach-omap2/omap4-keypad.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H -#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H - -struct omap_board_data; - -extern int omap4_keyboard_init(struct omap4_keypad_platform_data *, - struct omap_board_data *); -#endif diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index 35d418faf8f1..79f033b1ddff 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -45,7 +45,7 @@ static void __init orion5x_dt_init(void) orion5x_id(&dev, &rev, &dev_name); printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); - BUG_ON(mvebu_mbus_dt_init()); + BUG_ON(mvebu_mbus_dt_init(false)); /* * Setup Orion address map diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 3f1de1111e0f..6bbb7b55c6d1 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -365,8 +365,7 @@ void orion5x_restart(enum reboot_mode mode, const char *cmd) * Many orion-based systems have buggy bootloader implementations. * This is a common fixup for bogus memory tags. */ -void __init tag_fixup_mem32(struct tag *t, char **from, - struct meminfo *meminfo) +void __init tag_fixup_mem32(struct tag *t, char **from) { for (; t->hdr.size; t = tag_next(t)) if (t->hdr.tag == ATAG_MEM && diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 26d6f34b6027..cd0389c6e822 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -64,9 +64,8 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -struct meminfo; struct tag; -extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *); +extern void __init tag_fixup_mem32(struct tag *, char **); #ifdef CONFIG_MACH_MSS2_DT extern void mss2_init(void); diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile index 7a6b4a323125..8846e7d87ea5 100644 --- a/arch/arm/mach-prima2/Makefile +++ b/arch/arm/mach-prima2/Makefile @@ -2,7 +2,6 @@ obj-y += rstc.o obj-y += common.o obj-y += rtciobrg.o obj-$(CONFIG_DEBUG_LL) += lluart.o -obj-$(CONFIG_CACHE_L2X0) += l2x0.o obj-$(CONFIG_SUSPEND) += pm.o sleep.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index 47c7819edb9b..a860ea27e8ae 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -34,6 +34,8 @@ static const char *atlas6_dt_match[] __initconst = { DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .map_io = sirfsoc_map_io, .init_late = sirfsoc_init_late, .dt_compat = atlas6_dt_match, @@ -48,6 +50,8 @@ static const char *prima2_dt_match[] __initconst = { DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .map_io = sirfsoc_map_io, .dma_zone_size = SZ_256M, .init_late = sirfsoc_init_late, @@ -63,6 +67,8 @@ static const char *marco_dt_match[] __initconst = { DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .smp = smp_ops(sirfsoc_smp_ops), .map_io = sirfsoc_map_io, .init_late = sirfsoc_init_late, diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c deleted file mode 100644 index c7102539c0b0..000000000000 --- a/arch/arm/mach-prima2/l2x0.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * l2 cache initialization for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/of.h> -#include <asm/hardware/cache-l2x0.h> - -struct l2x0_aux { - u32 val; - u32 mask; -}; - -static const struct l2x0_aux prima2_l2x0_aux __initconst = { - .val = 2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT, - .mask = 0, -}; - -static const struct l2x0_aux marco_l2x0_aux __initconst = { - .val = (2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) | - (1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT), - .mask = L2X0_AUX_CTRL_MASK, -}; - -static const struct of_device_id sirf_l2x0_ids[] __initconst = { - { .compatible = "sirf,prima2-pl310-cache", .data = &prima2_l2x0_aux, }, - { .compatible = "sirf,marco-pl310-cache", .data = &marco_l2x0_aux, }, - {}, -}; - -static int __init sirfsoc_l2x0_init(void) -{ - struct device_node *np; - const struct l2x0_aux *aux; - - np = of_find_matching_node(NULL, sirf_l2x0_ids); - if (np) { - aux = of_match_node(sirf_l2x0_ids, np)->data; - return l2x0_of_init(aux->val, aux->mask); - } - - return 0; -} -early_initcall(sirfsoc_l2x0_init); diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index c4525a88e5da..96e9bc102117 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -71,7 +71,6 @@ static int sirfsoc_pm_enter(suspend_state_t state) case PM_SUSPEND_MEM: sirfsoc_pre_suspend_power_off(); - outer_flush_all(); outer_disable(); /* go zzz */ cpu_suspend(0, sirfsoc_finish_suspend); diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 584439bfa59f..4d3588d26c2a 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -837,8 +837,7 @@ static void __init cm_x300_init(void) cm_x300_init_bl(); } -static void __init cm_x300_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init cm_x300_fixup(struct tag *tags, char **cmdline) { /* Make sure that mi->bank[0].start = PHYS_ADDR */ for (; tags->hdr.size; tags = tag_next(tags)) diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 57d60542f982..91dd1c7cdbcd 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -34,6 +34,7 @@ #include <linux/input/matrix_keypad.h> #include <linux/gpio_keys.h> #include <linux/module.h> +#include <linux/memblock.h> #include <video/w100fb.h> #include <asm/setup.h> @@ -753,16 +754,13 @@ static void __init corgi_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init fixup_corgi(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init fixup_corgi(struct tag *tags, char **cmdline) { sharpsl_save_param(); - mi->nr_banks=1; - mi->bank[0].start = 0xa0000000; if (machine_is_corgi()) - mi->bank[0].size = (32*1024*1024); + memblock_add(0xa0000000, SZ_32M); else - mi->bank[0].size = (64*1024*1024); + memblock_add(0xa0000000, SZ_64M); } #ifdef CONFIG_MACH_CORGI diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 8280ebcaab9f..cfb864173ce3 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -21,6 +21,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/usb/gpio_vbus.h> +#include <linux/memblock.h> #include <video/w100fb.h> @@ -41,14 +42,12 @@ #include "clock.h" /* Only e800 has 128MB RAM */ -void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) +void __init eseries_fixup(struct tag *tags, char **cmdline) { - mi->nr_banks=1; - mi->bank[0].start = 0xa0000000; if (machine_is_e800()) - mi->bank[0].size = (128*1024*1024); + memblock_add(0xa0000000, SZ_128M); else - mi->bank[0].size = (64*1024*1024); + memblock_add(0xa0000000, SZ_64M); } struct gpio_vbus_mach_info e7xx_udc_info = { diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index a7c30eb0c8db..c66ad4edc5e3 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -574,7 +574,8 @@ static struct platform_device backlight = { }; static struct pwm_lookup hx4700_pwm_lookup[] = { - PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL), + PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL, + 30923, PWM_POLARITY_NORMAL), }; /* diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index aedf053a1de5..131991629116 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -29,6 +29,7 @@ #include <linux/spi/ads7846.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/mtd/sharpsl.h> +#include <linux/memblock.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -456,13 +457,10 @@ static void __init poodle_init(void) poodle_init_spi(); } -static void __init fixup_poodle(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init fixup_poodle(struct tag *tags, char **cmdline) { sharpsl_save_param(); - mi->nr_banks=1; - mi->bank[0].start = 0xa0000000; - mi->bank[0].size = (32*1024*1024); + memblock_add(0xa0000000, SZ_32M); } MACHINE_START(POODLE, "SHARP Poodle") diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 0b11c1af51c4..840c3a48e720 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -32,6 +32,7 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/reboot.h> +#include <linux/memblock.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -971,13 +972,10 @@ static void __init spitz_init(void) spitz_i2c_init(); } -static void __init spitz_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init spitz_fixup(struct tag *tags, char **cmdline) { sharpsl_save_param(); - mi->nr_banks = 1; - mi->bank[0].start = 0xa0000000; - mi->bank[0].size = (64*1024*1024); + memblock_add(0xa0000000, SZ_64M); } #ifdef CONFIG_MACH_SPITZ diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index ef5557b807ed..c158a6e3e0aa 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -37,6 +37,7 @@ #include <linux/i2c/pxa-i2c.h> #include <linux/usb/gpio_vbus.h> #include <linux/reboot.h> +#include <linux/memblock.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -960,13 +961,10 @@ static void __init tosa_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init fixup_tosa(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init fixup_tosa(struct tag *tags, char **cmdline) { sharpsl_save_param(); - mi->nr_banks=1; - mi->bank[0].start = 0xa0000000; - mi->bank[0].size = (64*1024*1024); + memblock_add(0xa0000000, SZ_64M); } MACHINE_START(TOSA, "SHARP Tosa") diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 960b8dd78c44..8c1b39a0caa0 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -31,6 +31,7 @@ #include <linux/amba/mmci.h> #include <linux/gfp.h> #include <linux/mtd/physmap.h> +#include <linux/memblock.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -385,19 +386,15 @@ void __init realview_timer_init(unsigned int timer_irq) /* * Setup the memory banks. */ -void realview_fixup(struct tag *tags, char **from, struct meminfo *meminfo) +void realview_fixup(struct tag *tags, char **from) { /* * Most RealView platforms have 512MB contiguous RAM at 0x70000000. * Half of this is mirrored at 0. */ #ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET - meminfo->bank[0].start = 0x70000000; - meminfo->bank[0].size = SZ_512M; - meminfo->nr_banks = 1; + memblock_add(0x70000000, SZ_512M); #else - meminfo->bank[0].start = 0; - meminfo->bank[0].size = SZ_256M; - meminfo->nr_banks = 1; + memblock_add(0, SZ_256M); #endif } diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 13dc830ef469..868ece221978 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -52,8 +52,7 @@ extern int realview_flash_register(struct resource *res, u32 num); extern int realview_eth_register(const char *name, struct resource *res); extern int realview_usb_register(struct resource *res); extern void realview_init_early(void); -extern void realview_fixup(struct tag *tags, char **from, - struct meminfo *meminfo); +extern void realview_fixup(struct tag *tags, char **from); extern struct smp_operations realview_smp_ops; extern void realview_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 6bb070e80128..739d4f113097 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -442,8 +442,13 @@ static void __init realview_eb_init(void) realview_eb11mp_fixup(); #ifdef CONFIG_CACHE_L2X0 - /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled - * Bits: .... ...0 0111 1001 0000 .... .... .... */ + /* + * The PL220 needs to be manually configured as the hardware + * doesn't report the correct sizes. + * 1MB (128KB/way), 8-way associativity, event monitor and + * parity enabled, ignore share bit, no force write allocate + * Bits: .... ...0 0111 1001 0000 .... .... .... + */ l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff); #endif platform_device_register(&pmu_device); diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 173f2c15de49..b0e0dcaed944 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -32,6 +32,7 @@ #include <linux/irqchip/arm-gic.h> #include <linux/platform_data/clk-realview.h> #include <linux/reboot.h> +#include <linux/memblock.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -339,15 +340,12 @@ static void realview_pb1176_restart(enum reboot_mode mode, const char *cmd) dsb(); } -static void realview_pb1176_fixup(struct tag *tags, char **from, - struct meminfo *meminfo) +static void realview_pb1176_fixup(struct tag *tags, char **from) { /* * RealView PB1176 only has 128MB of RAM mapped at 0. */ - meminfo->bank[0].start = 0; - meminfo->bank[0].size = SZ_128M; - meminfo->nr_banks = 1; + memblock_add(0, SZ_128M); } static void __init realview_pb1176_init(void) @@ -355,7 +353,13 @@ static void __init realview_pb1176_init(void) int i; #ifdef CONFIG_CACHE_L2X0 - /* 128Kb (16Kb/way) 8-way associativity. evmon/parity/share enabled. */ + /* + * The PL220 needs to be manually configured as the hardware + * doesn't report the correct sizes. + * 128kB (16kB/way), 8-way associativity, event monitor and + * parity enabled, ignore share bit, no force write allocate + * Bits: .... ...0 0111 0011 0000 .... .... .... + */ l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff); #endif diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index bde7e6b1fd44..47bf55fdbf27 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -337,8 +337,13 @@ static void __init realview_pb11mp_init(void) int i; #ifdef CONFIG_CACHE_L2X0 - /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled - * Bits: .... ...0 0111 1001 0000 .... .... .... */ + /* + * The PL220 needs to be manually configured as the hardware + * doesn't report the correct sizes. + * 1MB (128KB/way), 8-way associativity, event monitor and + * parity enabled, ignore share bit, no force write allocate + * Bits: .... ...0 0111 1001 0000 .... .... .... + */ l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff); #endif diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 72c96caebefa..d89eb4023467 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -29,6 +29,7 @@ #include <linux/irqchip/arm-gic.h> #include <linux/platform_data/clk-realview.h> #include <linux/reboot.h> +#include <linux/memblock.h> #include <asm/irq.h> #include <asm/mach-types.h> @@ -325,23 +326,19 @@ static void __init realview_pbx_timer_init(void) realview_pbx_twd_init(); } -static void realview_pbx_fixup(struct tag *tags, char **from, - struct meminfo *meminfo) +static void realview_pbx_fixup(struct tag *tags, char **from) { #ifdef CONFIG_SPARSEMEM /* * Memory configuration with SPARSEMEM enabled on RealView PBX (see * asm/mach/memory.h for more information). */ - meminfo->bank[0].start = 0; - meminfo->bank[0].size = SZ_256M; - meminfo->bank[1].start = 0x20000000; - meminfo->bank[1].size = SZ_512M; - meminfo->bank[2].start = 0x80000000; - meminfo->bank[2].size = SZ_256M; - meminfo->nr_banks = 3; + + memblock_add(0, SZ_256M); + memblock_add(0x20000000, SZ_512M); + memblock_add(0x80000000, SZ_256M); #else - realview_fixup(tags, from, meminfo); + realview_fixup(tags, from); #endif } @@ -370,8 +367,8 @@ static void __init realview_pbx_init(void) __io_address(REALVIEW_PBX_TILE_L220_BASE); /* set RAM latencies to 1 cycle for eASIC */ - writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL); - writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL); + writel(0, l2x0_base + L310_TAG_LATENCY_CTRL); + writel(0, l2x0_base + L310_DATA_LATENCY_CTRL); /* 16KB way size, 8-way associativity, parity disabled * Bits: .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */ diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index 4499b0a31a27..968cc348e624 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -24,12 +24,6 @@ #include <asm/hardware/cache-l2x0.h> #include "core.h" -static void __init rockchip_dt_init(void) -{ - l2x0_of_init(0, ~0UL); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char * const rockchip_board_dt_compat[] = { "rockchip,rk2928", "rockchip,rk3066a", @@ -39,6 +33,7 @@ static const char * const rockchip_board_dt_compat[] = { }; DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)") - .init_machine = rockchip_dt_init, + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .dt_compat = rockchip_board_dt_compat, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index a38f8a049e22..fb3b80e44595 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -22,6 +22,7 @@ #include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/memblock.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -93,13 +94,10 @@ static struct platform_device *smdk2413_devices[] __initdata = { &s3c2412_device_dma, }; -static void __init smdk2413_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init smdk2413_fixup(struct tag *tags, char **cmdline) { if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { - mi->nr_banks=1; - mi->bank[0].start = 0x30000000; - mi->bank[0].size = SZ_64M; + memblock_add(0x30000000, SZ_64M); } } diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 6b706c915387..9104c2be36c9 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -23,6 +23,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> +#include <linux/memblock.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -129,13 +130,10 @@ static struct platform_device *vstms_devices[] __initdata = { &s3c2412_device_dma, }; -static void __init vstms_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init vstms_fixup(struct tag *tags, char **cmdline) { if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { - mi->nr_banks=1; - mi->bank[0].start = 0x30000000; - mi->bank[0].size = SZ_64M; + memblock_add(0x30000000, SZ_64M); } } diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index b41a38a75844..c1ce921c4088 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -49,11 +49,6 @@ #include <plat/clock.h> #include <plat/samsung-time.h> #include <plat/mfc.h> -#include <plat/camport.h> - -#include <media/v4l2-mediabus.h> -#include <media/s5p_fimc.h> -#include <media/noon010pc30.h> #include "common.h" @@ -239,14 +234,6 @@ static void __init goni_radio_init(void) /* TSP */ static struct mxt_platform_data qt602240_platform_data = { - .x_line = 17, - .y_line = 11, - .x_size = 800, - .y_size = 480, - .blen = 0x21, - .threshold = 0x28, - .voltage = 2800000, /* 2.8V */ - .orient = MXT_DIAGONAL, .irqflags = IRQF_TRIGGER_FALLING, }; @@ -285,14 +272,6 @@ static void __init goni_tsp_init(void) /* USB OTG */ static struct s3c_hsotg_plat goni_hsotg_pdata; -static void goni_camera_init(void) -{ - s5pv210_fimc_setup_gpio(S5P_CAMPORT_A); - - /* Set max driver strength on CAM_A_CLKOUT pin. */ - s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4); -} - /* MAX8998 regulators */ #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) @@ -825,34 +804,6 @@ static void goni_setup_sdhci(void) s3c_sdhci2_set_platdata(&goni_hsmmc2_data); }; -static struct noon010pc30_platform_data noon010pc30_pldata = { - .clk_rate = 16000000UL, - .gpio_nreset = S5PV210_GPB(2), /* CAM_CIF_NRST */ - .gpio_nstby = S5PV210_GPB(0), /* CAM_CIF_NSTBY */ -}; - -static struct i2c_board_info noon010pc30_board_info = { - I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1), - .platform_data = &noon010pc30_pldata, -}; - -static struct fimc_source_info goni_camera_sensors[] = { - { - .mux_id = 0, - .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | - V4L2_MBUS_VSYNC_ACTIVE_LOW, - .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, - .board_info = &noon010pc30_board_info, - .i2c_bus_num = 0, - .clk_frequency = 16000000UL, - }, -}; - -static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = { - .source_info = goni_camera_sensors, - .num_clients = ARRAY_SIZE(goni_camera_sensors), -}; - /* Audio device */ static struct platform_device goni_device_audio = { .name = "smdk-audio", @@ -874,10 +825,6 @@ static struct platform_device *goni_devices[] __initdata = { &s5p_device_mixer, &s5p_device_sdo, &s3c_device_i2c0, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc_md, &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, @@ -946,14 +893,8 @@ static void __init goni_machine_init(void) /* FB */ s3c_fb_set_platdata(&goni_lcd_pdata); - /* FIMC */ - s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata), - &s5p_device_fimc_md); - s3c_hsotg_set_platdata(&goni_hsotg_pdata); - goni_camera_init(); - /* SPI */ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 8443a27bca2f..7dd894ece9ae 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -531,7 +531,7 @@ static void __init get_assabet_scr(void) } static void __init -fixup_assabet(struct tag *tags, char **cmdline, struct meminfo *mi) +fixup_assabet(struct tag *tags, char **cmdline) { /* This must be done before any call to machine_has_neponset() */ map_sa1100_gpio_regs(); diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c index 57d246eb8813..f660fbb96e0b 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c @@ -164,8 +164,8 @@ static void __init eva_init(void) r8a7740_meram_workaround(); #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 32K*8way */ - l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); + /* Shared attribute override enable, 32K*8way */ + l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff); #endif r8a7740_add_standard_devices_dt(); diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index bc2cf7a89534..30fcac73a540 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -31,7 +31,7 @@ #include <linux/gpio_keys.h> #include <linux/regulator/driver.h> #include <linux/pinctrl/machine.h> -#include <linux/platform_data/pwm-renesas-tpu.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/regulator/fixed.h> #include <linux/regulator/gpio-regulator.h> @@ -399,24 +399,16 @@ static struct resource pwm_resources[] = { }, }; -static struct tpu_pwm_platform_data pwm_device_data = { - .channels[2] = { - .polarity = PWM_POLARITY_INVERSED, - } -}; - static struct platform_device pwm_device = { .name = "renesas-tpu-pwm", .id = -1, - .dev = { - .platform_data = &pwm_device_data, - }, .num_resources = ARRAY_SIZE(pwm_resources), .resource = pwm_resources, }; static struct pwm_lookup pwm_lookup[] = { - PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL), + PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL, + 33333, PWM_POLARITY_INVERSED), }; /* LCDC and backlight */ @@ -1271,8 +1263,8 @@ static void __init eva_init(void) #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 32K*8way */ - l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); + /* Shared attribute override enable, 32K*8way */ + l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff); #endif i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index 598e32488410..a735a1d80c28 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -36,8 +36,8 @@ static void __init kzm_init(void) sh73a0_add_standard_devices_dt(); #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 64K*8way */ - l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); + /* Shared attribute override enable, 64K*8way */ + l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); #endif } diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 03dc3ac84502..f94ec8ca42c1 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -876,8 +876,8 @@ static void __init kzm_init(void) gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */ #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 64K*8way */ - l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); + /* Shared attribute override enable, 64K*8way */ + l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); #endif i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 8c02e24f2483..d311ef903b39 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -285,10 +285,10 @@ void __init r8a7778_add_dt_devices(void) void __iomem *base = ioremap_nocache(0xf0100000, 0x1000); if (base) { /* - * Early BRESP enable, Shared attribute override enable, 64K*16way + * Shared attribute override enable, 64K*16way * don't call iounmap(base) */ - l2x0_init(base, 0x40470000, 0x82000fff); + l2x0_init(base, 0x00400000, 0xc20f0fff); } #endif diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index d197b5adc886..aba4ed652d54 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -660,8 +660,8 @@ static struct platform_device *r8a7779_standard_devices[] __initdata = { void __init r8a7779_add_standard_devices(void) { #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 64K*16way */ - l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff); + /* Shared attribute override enable, 64K*16way */ + l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); #endif r8a7779_pm_init(); diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index d86231e11b34..adbf38314ca8 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -98,22 +98,17 @@ static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd) writel(temp, rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL); } -static void __init socfpga_cyclone5_init(void) -{ - l2x0_of_init(0, ~0UL); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char *altera_dt_match[] = { "altr,socfpga", NULL }; DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .smp = smp_ops(socfpga_smp_ops), .map_io = socfpga_map_io, .init_irq = socfpga_init_irq, - .init_machine = socfpga_cyclone5_init, .restart = socfpga_cyclone5_restart, .dt_compat = altera_dt_match, MACHINE_END diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c index c19751fff2c6..fd4297713d67 100644 --- a/arch/arm/mach-spear/platsmp.c +++ b/arch/arm/mach-spear/platsmp.c @@ -20,6 +20,18 @@ #include <mach/spear.h> #include "generic.h" +/* + * Write pen_release in a way that is guaranteed to be visible to all + * observers, irrespective of whether they're taking part in coherency + * or not. This is necessary for the hotplug code to work reliably. + */ +static void write_pen_release(int val) +{ + pen_release = val; + smp_wmb(); + sync_cache_w(&pen_release); +} + static DEFINE_SPINLOCK(boot_lock); static void __iomem *scu_base = IOMEM(VA_SCU_BASE); @@ -30,8 +42,7 @@ static void spear13xx_secondary_init(unsigned int cpu) * let the primary processor know we're out of the * pen, then head off into the C entry point */ - pen_release = -1; - smp_wmb(); + write_pen_release(-1); /* * Synchronise with the boot thread. @@ -58,9 +69,7 @@ static int spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle) * Note that "pen_release" is the hardware CPU ID, whereas * "cpu" is Linux's internal ID. */ - pen_release = cpu; - flush_cache_all(); - outer_flush_all(); + write_pen_release(cpu); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c index 7aa6e8cf830f..c9897ea38980 100644 --- a/arch/arm/mach-spear/spear13xx.c +++ b/arch/arm/mach-spear/spear13xx.c @@ -38,15 +38,15 @@ void __init spear13xx_l2x0_init(void) if (!IS_ENABLED(CONFIG_CACHE_L2X0)) return; - writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL); + writel_relaxed(0x06, VA_L2CC_BASE + L310_PREFETCH_CTRL); /* * Program following latencies in order to make * SPEAr1340 work at 600 MHz */ - writel_relaxed(0x221, VA_L2CC_BASE + L2X0_TAG_LATENCY_CTRL); - writel_relaxed(0x441, VA_L2CC_BASE + L2X0_DATA_LATENCY_CTRL); - l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff); + writel_relaxed(0x221, VA_L2CC_BASE + L310_TAG_LATENCY_CTRL); + writel_relaxed(0x441, VA_L2CC_BASE + L310_DATA_LATENCY_CTRL); + l2x0_init(VA_L2CC_BASE, 0x30a00001, 0xfe0fffff); } /* diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index df731f2322fa..3cf6ef8d4317 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -14,25 +14,6 @@ #include "smp.h" -void __init stih41x_l2x0_init(void) -{ - u32 way_size = 0x4; - u32 aux_ctrl; - /* may be this can be encoded in macros like BIT*() */ - aux_ctrl = (0x1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) | - (0x1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) | - (0x1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) | - (way_size << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); - - l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK); -} - -static void __init stih41x_machine_init(void) -{ - stih41x_l2x0_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char *stih41x_dt_match[] __initdata = { "st,stih415", "st,stih416", @@ -41,7 +22,11 @@ static const char *stih41x_dt_match[] __initdata = { }; DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree") - .init_machine = stih41x_machine_init, - .smp = smp_ops(sti_smp_ops), .dt_compat = stih41x_dt_match, + .l2c_aux_val = L2C_AUX_CTRL_SHARED_OVERRIDE | + L310_AUX_CTRL_DATA_PREFETCH | + L310_AUX_CTRL_INSTR_PREFETCH | + L2C_AUX_CTRL_WAY_SIZE(4), + .l2c_aux_mask = 0xc0000fff, + .smp = smp_ops(sti_smp_ops), MACHINE_END diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 6e92a7c2ecbd..f4a89698e5b0 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -35,8 +35,6 @@ void tegra20_sleep_core_init(void); void tegra30_lp1_iram_hook(void); void tegra30_sleep_core_init(void); -extern unsigned long l2x0_saved_regs_addr; - void tegra_clear_cpu_in_lp2(void); bool tegra_set_cpu_in_lp2(void); diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 8c1ba4fea384..578d4d1ad648 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -19,7 +19,6 @@ #include <asm/cache.h> #include <asm/asm-offsets.h> -#include <asm/hardware/cache-l2x0.h> #include "flowctrl.h" #include "fuse.h" @@ -78,8 +77,10 @@ ENTRY(tegra_resume) str r1, [r0] #endif +#ifdef CONFIG_CACHE_L2X0 /* L2 cache resume & re-enable */ - l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr + bl l2c310_early_resume +#endif end_ca9_scu_l2_resume: mov32 r9, 0xc0f cmp r8, r9 @@ -89,12 +90,6 @@ end_ca9_scu_l2_resume: ENDPROC(tegra_resume) #endif -#ifdef CONFIG_CACHE_L2X0 - .globl l2x0_saved_regs_addr -l2x0_saved_regs_addr: - .long 0 -#endif - .align L1_CACHE_SHIFT ENTRY(__tegra_cpu_reset_handler_start) diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index a4edbb3abd3d..339fe42cd6fb 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -120,37 +120,6 @@ mov \tmp1, \tmp1, lsr #8 .endm -/* Macro to resume & re-enable L2 cache */ -#ifndef L2X0_CTRL_EN -#define L2X0_CTRL_EN 1 -#endif - -#ifdef CONFIG_CACHE_L2X0 -.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs - W(adr) \tmp1, \phys_l2x0_saved_regs - ldr \tmp1, [\tmp1] - ldr \tmp2, [\tmp1, #L2X0_R_PHY_BASE] - ldr \tmp3, [\tmp2, #L2X0_CTRL] - tst \tmp3, #L2X0_CTRL_EN - bne exit_l2_resume - ldr \tmp3, [\tmp1, #L2X0_R_TAG_LATENCY] - str \tmp3, [\tmp2, #L2X0_TAG_LATENCY_CTRL] - ldr \tmp3, [\tmp1, #L2X0_R_DATA_LATENCY] - str \tmp3, [\tmp2, #L2X0_DATA_LATENCY_CTRL] - ldr \tmp3, [\tmp1, #L2X0_R_PREFETCH_CTRL] - str \tmp3, [\tmp2, #L2X0_PREFETCH_CTRL] - ldr \tmp3, [\tmp1, #L2X0_R_PWR_CTRL] - str \tmp3, [\tmp2, #L2X0_POWER_CTRL] - ldr \tmp3, [\tmp1, #L2X0_R_AUX_CTRL] - str \tmp3, [\tmp2, #L2X0_AUX_CTRL] - mov \tmp3, #L2X0_CTRL_EN - str \tmp3, [\tmp2, #L2X0_CTRL] -exit_l2_resume: -.endm -#else /* CONFIG_CACHE_L2X0 */ -.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs -.endm -#endif /* CONFIG_CACHE_L2X0 */ #else void tegra_pen_lock(void); void tegra_pen_unlock(void); diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 6191603379e1..15ac9fcc96b1 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -70,40 +70,12 @@ u32 tegra_uart_config[3] = { 0, }; -static void __init tegra_init_cache(void) -{ -#ifdef CONFIG_CACHE_L2X0 - static const struct of_device_id pl310_ids[] __initconst = { - { .compatible = "arm,pl310-cache", }, - {} - }; - - struct device_node *np; - int ret; - void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; - u32 aux_ctrl, cache_type; - - np = of_find_matching_node(NULL, pl310_ids); - if (!np) - return; - - cache_type = readl(p + L2X0_CACHE_TYPE); - aux_ctrl = (cache_type & 0x700) << (17-8); - aux_ctrl |= 0x7C400001; - - ret = l2x0_of_init(aux_ctrl, 0x8200c3fe); - if (!ret) - l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs); -#endif -} - static void __init tegra_init_early(void) { of_register_trusted_foundations(); tegra_apb_io_init(); tegra_init_fuse(); tegra_cpu_reset_handler_init(); - tegra_init_cache(); tegra_powergate_init(); tegra_hotplug_init(); } @@ -191,8 +163,10 @@ static const char * const tegra_dt_board_compat[] = { }; DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)") - .map_io = tegra_map_common_io, + .l2c_aux_val = 0x3c400001, + .l2c_aux_mask = 0xc20fc3fe, .smp = smp_ops(tegra_smp_ops), + .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_dt_init_irq, .init_machine = tegra_dt_init, diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 264f894c0e3d..842ebedbdd1c 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -35,10 +35,16 @@ static int __init ux500_l2x0_unlock(void) return 0; } -static int __init ux500_l2x0_init(void) +static void ux500_l2c310_write_sec(unsigned long val, unsigned reg) { - u32 aux_val = 0x3e000000; + /* + * We can't write to secure registers as we are in non-secure + * mode, until we have some SMI service available. + */ +} +static int __init ux500_l2x0_init(void) +{ if (cpu_is_u8500_family() || cpu_is_ux540_family()) l2x0_base = __io_address(U8500_L2CC_BASE); else @@ -48,28 +54,12 @@ static int __init ux500_l2x0_init(void) /* Unlock before init */ ux500_l2x0_unlock(); - /* DBx540's L2 has 128KB way size */ - if (cpu_is_ux540_family()) - /* 128KB way size */ - aux_val |= (0x4 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); - else - /* 64KB way size */ - aux_val |= (0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); + outer_cache.write_sec = ux500_l2c310_write_sec; - /* 64KB way size, 8 way associativity, force WA */ if (of_have_populated_dt()) - l2x0_of_init(aux_val, 0xc0000fff); + l2x0_of_init(0, ~0); else - l2x0_init(l2x0_base, aux_val, 0xc0000fff); - - /* - * We can't disable l2 as we are in non secure mode, currently - * this seems be called only during kexec path. So let's - * override outer.disable with nasty assignment until we have - * some SMI service available. - */ - outer_cache.disable = NULL; - outer_cache.set_debug = NULL; + l2x0_init(l2x0_base, 0, ~0); return 0; } diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index b8ac752fd24b..90249cfc37b3 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -4,6 +4,7 @@ config ARCH_VEXPRESS select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC + select ARM_GLOBAL_TIMER select ARM_TIMER_SP804 select COMMON_CLK_VERSATILE select HAVE_ARM_SCU if SMP diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 494d70bfddad..86150d7a2e7d 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -45,6 +45,23 @@ static void __init ct_ca9x4_map_io(void) iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); } +static void __init ca9x4_l2_init(void) +{ +#ifdef CONFIG_CACHE_L2X0 + void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K); + + if (l2x0_base) { + /* set RAM latencies to 1 cycle for this core tile. */ + writel(0, l2x0_base + L310_TAG_LATENCY_CTRL); + writel(0, l2x0_base + L310_DATA_LATENCY_CTRL); + + l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); + } else { + pr_err("L2C: unable to map L2 cache controller\n"); + } +#endif +} + #ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, A9_MPCORE_TWD, IRQ_LOCALTIMER); @@ -63,6 +80,7 @@ static void __init ct_ca9x4_init_irq(void) gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K), ioremap(A9_MPCORE_GIC_CPU, SZ_256)); ca9x4_twd_init(); + ca9x4_l2_init(); } static int ct_ca9x4_clcd_setup(struct clcd_fb *fb) @@ -146,16 +164,6 @@ static void __init ct_ca9x4_init(void) { int i; -#ifdef CONFIG_CACHE_L2X0 - void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K); - - /* set RAM latencies to 1 cycle for this core tile. */ - writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL); - writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL); - - l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); -#endif - for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++) amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c index 29e7785a54bc..b743a0ae02ce 100644 --- a/arch/arm/mach-vexpress/tc2_pm.c +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -209,7 +209,7 @@ static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster) #define POLL_MSEC 10 #define TIMEOUT_MSEC 1000 -static int tc2_pm_power_down_finish(unsigned int cpu, unsigned int cluster) +static int tc2_pm_wait_for_powerdown(unsigned int cpu, unsigned int cluster) { unsigned tries; @@ -290,7 +290,7 @@ static void tc2_pm_powered_up(void) static const struct mcpm_platform_ops tc2_pm_power_ops = { .power_up = tc2_pm_power_up, .power_down = tc2_pm_power_down, - .power_down_finish = tc2_pm_power_down_finish, + .wait_for_powerdown = tc2_pm_wait_for_powerdown, .suspend = tc2_pm_suspend, .powered_up = tc2_pm_powered_up, }; diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 38f4f6f37770..6ff681a24ba7 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -372,7 +372,6 @@ MACHINE_END static void __init v2m_dt_init(void) { - l2x0_of_init(0x00400000, 0xfe0fffff); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -383,6 +382,8 @@ static const char * const v2m_dt_match[] __initconst = { DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .dt_compat = v2m_dt_match, + .l2c_aux_val = 0x00400000, + .l2c_aux_mask = 0xfe0fffff, .smp = smp_ops(vexpress_smp_dt_ops), .smp_init = smp_init_ops(vexpress_smp_init_ops), .init_machine = v2m_dt_init, diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index edbd9d83f407..31a6fa40ba37 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -109,11 +109,6 @@ static void __init zynq_init_machine(void) struct soc_device *soc_dev; struct device *parent = NULL; - /* - * 64KB way size, 8-way associativity, parity disabled - */ - l2x0_of_init(0x02060000, 0xF0F0FFFF); - soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); if (!soc_dev_attr) goto out; @@ -202,6 +197,9 @@ static const char * const zynq_dt_match[] = { }; DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform") + /* 64KB way size, 8-way associativity, parity disabled */ + .l2c_aux_val = 0x02000000, + .l2c_aux_mask = 0xf0ffffff, .smp = smp_ops(zynq_smp_ops), .map_io = zynq_map_io, .init_irq = zynq_irq_init, diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 5bf7c3c3b301..eda0dd0ab97b 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -897,6 +897,57 @@ config CACHE_PL310 This option enables optimisations for the PL310 cache controller. +config PL310_ERRATA_588369 + bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" + depends on CACHE_L2X0 + help + The PL310 L2 cache controller implements three types of Clean & + Invalidate maintenance operations: by Physical Address + (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC). + They are architecturally defined to behave as the execution of a + clean operation followed immediately by an invalidate operation, + both performing to the same memory location. This functionality + is not correctly implemented in PL310 as clean lines are not + invalidated as a result of these operations. + +config PL310_ERRATA_727915 + bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" + depends on CACHE_L2X0 + help + PL310 implements the Clean & Invalidate by Way L2 cache maintenance + operation (offset 0x7FC). This operation runs in background so that + PL310 can handle normal accesses while it is in progress. Under very + rare circumstances, due to this erratum, write data can be lost when + PL310 treats a cacheable write transaction during a Clean & + Invalidate by Way operation. + +config PL310_ERRATA_753970 + bool "PL310 errata: cache sync operation may be faulty" + depends on CACHE_PL310 + help + This option enables the workaround for the 753970 PL310 (r3p0) erratum. + + Under some condition the effect of cache sync operation on + the store buffer still remains when the operation completes. + This means that the store buffer is always asked to drain and + this prevents it from merging any further writes. The workaround + is to replace the normal offset of cache sync operation (0x730) + by another offset targeting an unmapped PL310 register 0x740. + This has the same effect as the cache sync operation: store buffer + drain and waiting for all buffers empty. + +config PL310_ERRATA_769419 + bool "PL310 errata: no automatic Store Buffer drain" + depends on CACHE_L2X0 + help + On revisions of the PL310 prior to r3p2, the Store Buffer does + not automatically drain. This can cause normal, non-cacheable + writes to be retained when the memory system is idle, leading + to suboptimal I/O performance for drivers using coherent DMA. + This option adds a write barrier to the cpu_idle loop so that, + on systems with an outer cache, the store buffer is drained + explicitly. + config CACHE_TAUROS2 bool "Enable the Tauros2 L2 cache controller" depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4) diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 7f39ce2f841f..91da64de440f 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -95,7 +95,8 @@ obj-$(CONFIG_CPU_V7M) += proc-v7m.o AFLAGS_proc-v6.o :=-Wa,-march=armv6 AFLAGS_proc-v7.o :=-Wa,-march=armv7-a +obj-$(CONFIG_OUTER_CACHE) += l2c-common.o obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o -obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o +obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o l2c-l2x0-resume.o obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 924036473b16..b8cb1a2688a0 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -28,6 +28,7 @@ #include <asm/opcodes.h> #include "fault.h" +#include "mm.h" /* * 32-bit misaligned trap handler (c) 1998 San Mehat (CCC) -July 1998 @@ -81,6 +82,7 @@ static unsigned long ai_word; static unsigned long ai_dword; static unsigned long ai_multi; static int ai_usermode; +static unsigned long cr_no_alignment; core_param(alignment, ai_usermode, int, 0600); @@ -91,7 +93,7 @@ core_param(alignment, ai_usermode, int, 0600); /* Return true if and only if the ARMv6 unaligned access model is in use. */ static bool cpu_is_v6_unaligned(void) { - return cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U); + return cpu_architecture() >= CPU_ARCH_ARMv6 && get_cr() & CR_U; } static int safe_usermode(int new_usermode, bool warn) @@ -949,6 +951,13 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) return 0; } +static int __init noalign_setup(char *__unused) +{ + set_cr(__clear_cr(CR_A)); + return 1; +} +__setup("noalign", noalign_setup); + /* * This needs to be done after sysctl_init, otherwise sys/ will be * overwritten. Actually, this shouldn't be in sys/ at all since @@ -966,14 +975,12 @@ static int __init alignment_init(void) return -ENOMEM; #endif -#ifdef CONFIG_CPU_CP15 if (cpu_is_v6_unaligned()) { - cr_alignment &= ~CR_A; - cr_no_alignment &= ~CR_A; - set_cr(cr_alignment); + set_cr(__clear_cr(CR_A)); ai_usermode = safe_usermode(ai_usermode, false); } -#endif + + cr_no_alignment = get_cr() & ~CR_A; hook_fault_code(FAULT_CODE_ALIGNMENT, do_alignment, SIGBUS, BUS_ADRALN, "alignment exception"); diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index dc814a548056..e028a7f2ebcc 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -350,7 +350,6 @@ void __init feroceon_l2_init(int __l2_wt_override) outer_cache.inv_range = feroceon_l2_inv_range; outer_cache.clean_range = feroceon_l2_clean_range; outer_cache.flush_range = feroceon_l2_flush_range; - outer_cache.inv_all = l2_inv_all; enable_l2(); diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 7abde2ce8973..efc5cabf70e0 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -16,18 +16,33 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/cpu.h> #include <linux/err.h> #include <linux/init.h> +#include <linux/smp.h> #include <linux/spinlock.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> +#include <asm/cputype.h> #include <asm/hardware/cache-l2x0.h> #include "cache-tauros3.h" #include "cache-aurora-l2.h" +struct l2c_init_data { + const char *type; + unsigned way_size_0; + unsigned num_lock; + void (*of_parse)(const struct device_node *, u32 *, u32 *); + void (*enable)(void __iomem *, u32, unsigned); + void (*fixup)(void __iomem *, u32, struct outer_cache_fns *); + void (*save)(void __iomem *); + struct outer_cache_fns outer_cache; +}; + #define CACHE_LINE_SIZE 32 static void __iomem *l2x0_base; @@ -36,96 +51,116 @@ static u32 l2x0_way_mask; /* Bitmask of active ways */ static u32 l2x0_size; static unsigned long sync_reg_offset = L2X0_CACHE_SYNC; -/* Aurora don't have the cache ID register available, so we have to - * pass it though the device tree */ -static u32 cache_id_part_number_from_dt; - struct l2x0_regs l2x0_saved_regs; -struct l2x0_of_data { - void (*setup)(const struct device_node *, u32 *, u32 *); - void (*save)(void); - struct outer_cache_fns outer_cache; -}; - -static bool of_init = false; - -static inline void cache_wait_way(void __iomem *reg, unsigned long mask) +/* + * Common code for all cache controllers. + */ +static inline void l2c_wait_mask(void __iomem *reg, unsigned long mask) { /* wait for cache operation by line or way to complete */ while (readl_relaxed(reg) & mask) cpu_relax(); } -#ifdef CONFIG_CACHE_PL310 -static inline void cache_wait(void __iomem *reg, unsigned long mask) +/* + * By default, we write directly to secure registers. Platforms must + * override this if they are running non-secure. + */ +static void l2c_write_sec(unsigned long val, void __iomem *base, unsigned reg) { - /* cache operations by line are atomic on PL310 */ + if (val == readl_relaxed(base + reg)) + return; + if (outer_cache.write_sec) + outer_cache.write_sec(val, reg); + else + writel_relaxed(val, base + reg); } -#else -#define cache_wait cache_wait_way -#endif -static inline void cache_sync(void) +/* + * This should only be called when we have a requirement that the + * register be written due to a work-around, as platforms running + * in non-secure mode may not be able to access this register. + */ +static inline void l2c_set_debug(void __iomem *base, unsigned long val) { - void __iomem *base = l2x0_base; - - writel_relaxed(0, base + sync_reg_offset); - cache_wait(base + L2X0_CACHE_SYNC, 1); + l2c_write_sec(val, base, L2X0_DEBUG_CTRL); } -static inline void l2x0_clean_line(unsigned long addr) +static void __l2c_op_way(void __iomem *reg) { - void __iomem *base = l2x0_base; - cache_wait(base + L2X0_CLEAN_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(l2x0_way_mask, reg); + l2c_wait_mask(reg, l2x0_way_mask); } -static inline void l2x0_inv_line(unsigned long addr) +static inline void l2c_unlock(void __iomem *base, unsigned num) { - void __iomem *base = l2x0_base; - cache_wait(base + L2X0_INV_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_INV_LINE_PA); + unsigned i; + + for (i = 0; i < num; i++) { + writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } } -#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915) -static inline void debug_writel(unsigned long val) +/* + * Enable the L2 cache controller. This function must only be + * called when the cache controller is known to be disabled. + */ +static void l2c_enable(void __iomem *base, u32 aux, unsigned num_lock) { - if (outer_cache.set_debug) - outer_cache.set_debug(val); + unsigned long flags; + + l2c_write_sec(aux, base, L2X0_AUX_CTRL); + + l2c_unlock(base, num_lock); + + local_irq_save(flags); + __l2c_op_way(base + L2X0_INV_WAY); + writel_relaxed(0, base + sync_reg_offset); + l2c_wait_mask(base + sync_reg_offset, 1); + local_irq_restore(flags); + + l2c_write_sec(L2X0_CTRL_EN, base, L2X0_CTRL); } -static void pl310_set_debug(unsigned long val) +static void l2c_disable(void) { - writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL); + void __iomem *base = l2x0_base; + + outer_cache.flush_all(); + l2c_write_sec(0, base, L2X0_CTRL); + dsb(st); } -#else -/* Optimised out for non-errata case */ -static inline void debug_writel(unsigned long val) + +#ifdef CONFIG_CACHE_PL310 +static inline void cache_wait(void __iomem *reg, unsigned long mask) { + /* cache operations by line are atomic on PL310 */ } - -#define pl310_set_debug NULL +#else +#define cache_wait l2c_wait_mask #endif -#ifdef CONFIG_PL310_ERRATA_588369 -static inline void l2x0_flush_line(unsigned long addr) +static inline void cache_sync(void) { void __iomem *base = l2x0_base; - /* Clean by PA followed by Invalidate by PA */ - cache_wait(base + L2X0_CLEAN_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA); - cache_wait(base + L2X0_INV_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_INV_LINE_PA); + writel_relaxed(0, base + sync_reg_offset); + cache_wait(base + L2X0_CACHE_SYNC, 1); } -#else -static inline void l2x0_flush_line(unsigned long addr) +#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915) +static inline void debug_writel(unsigned long val) +{ + l2c_set_debug(l2x0_base, val); +} +#else +/* Optimised out for non-errata case */ +static inline void debug_writel(unsigned long val) { - void __iomem *base = l2x0_base; - cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_CLEAN_INV_LINE_PA); } #endif @@ -141,8 +176,7 @@ static void l2x0_cache_sync(void) static void __l2x0_flush_all(void) { debug_writel(0x03); - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY); - cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask); + __l2c_op_way(l2x0_base + L2X0_CLEAN_INV_WAY); cache_sync(); debug_writel(0x00); } @@ -157,275 +191,883 @@ static void l2x0_flush_all(void) raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_clean_all(void) +static void l2x0_disable(void) { unsigned long flags; - /* clean all ways */ raw_spin_lock_irqsave(&l2x0_lock, flags); - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_WAY); - cache_wait_way(l2x0_base + L2X0_CLEAN_WAY, l2x0_way_mask); - cache_sync(); + __l2x0_flush_all(); + l2c_write_sec(0, l2x0_base, L2X0_CTRL); + dsb(st); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_inv_all(void) +static void l2c_save(void __iomem *base) { - unsigned long flags; + l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); +} - /* invalidate all ways */ - raw_spin_lock_irqsave(&l2x0_lock, flags); - /* Invalidating when L2 is enabled is a nono */ - BUG_ON(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN); - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); - cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); - cache_sync(); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); +/* + * L2C-210 specific code. + * + * The L2C-2x0 PA, set/way and sync operations are atomic, but we must + * ensure that no background operation is running. The way operations + * are all background tasks. + * + * While a background operation is in progress, any new operation is + * ignored (unspecified whether this causes an error.) Thankfully, not + * used on SMP. + * + * Never has a different sync register other than L2X0_CACHE_SYNC, but + * we use sync_reg_offset here so we can share some of this with L2C-310. + */ +static void __l2c210_cache_sync(void __iomem *base) +{ + writel_relaxed(0, base + sync_reg_offset); } -static void l2x0_inv_range(unsigned long start, unsigned long end) +static void __l2c210_op_pa_range(void __iomem *reg, unsigned long start, + unsigned long end) +{ + while (start < end) { + writel_relaxed(start, reg); + start += CACHE_LINE_SIZE; + } +} + +static void l2c210_inv_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; - unsigned long flags; - raw_spin_lock_irqsave(&l2x0_lock, flags); if (start & (CACHE_LINE_SIZE - 1)) { start &= ~(CACHE_LINE_SIZE - 1); - debug_writel(0x03); - l2x0_flush_line(start); - debug_writel(0x00); + writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA); start += CACHE_LINE_SIZE; } if (end & (CACHE_LINE_SIZE - 1)) { end &= ~(CACHE_LINE_SIZE - 1); - debug_writel(0x03); - l2x0_flush_line(end); - debug_writel(0x00); + writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA); } + __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c210_clean_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + start &= ~(CACHE_LINE_SIZE - 1); + __l2c210_op_pa_range(base + L2X0_CLEAN_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c210_flush_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + start &= ~(CACHE_LINE_SIZE - 1); + __l2c210_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c210_flush_all(void) +{ + void __iomem *base = l2x0_base; + + BUG_ON(!irqs_disabled()); + + __l2c_op_way(base + L2X0_CLEAN_INV_WAY); + __l2c210_cache_sync(base); +} + +static void l2c210_sync(void) +{ + __l2c210_cache_sync(l2x0_base); +} + +static void l2c210_resume(void) +{ + void __iomem *base = l2x0_base; + + if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) + l2c_enable(base, l2x0_saved_regs.aux_ctrl, 1); +} + +static const struct l2c_init_data l2c210_data __initconst = { + .type = "L2C-210", + .way_size_0 = SZ_8K, + .num_lock = 1, + .enable = l2c_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c_disable, + .sync = l2c210_sync, + .resume = l2c210_resume, + }, +}; + +/* + * L2C-220 specific code. + * + * All operations are background operations: they have to be waited for. + * Conflicting requests generate a slave error (which will cause an + * imprecise abort.) Never uses sync_reg_offset, so we hard-code the + * sync register here. + * + * However, we can re-use the l2c210_resume call. + */ +static inline void __l2c220_cache_sync(void __iomem *base) +{ + writel_relaxed(0, base + L2X0_CACHE_SYNC); + l2c_wait_mask(base + L2X0_CACHE_SYNC, 1); +} + +static void l2c220_op_way(void __iomem *base, unsigned reg) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + __l2c_op_way(base + reg); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static unsigned long l2c220_op_pa_range(void __iomem *reg, unsigned long start, + unsigned long end, unsigned long flags) +{ + raw_spinlock_t *lock = &l2x0_lock; + while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); while (start < blk_end) { - l2x0_inv_line(start); + l2c_wait_mask(reg, 1); + writel_relaxed(start, reg); start += CACHE_LINE_SIZE; } if (blk_end < end) { - raw_spin_unlock_irqrestore(&l2x0_lock, flags); - raw_spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(lock, flags); + raw_spin_lock_irqsave(lock, flags); } } - cache_wait(base + L2X0_INV_LINE_PA, 1); - cache_sync(); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); + + return flags; } -static void l2x0_clean_range(unsigned long start, unsigned long end) +static void l2c220_inv_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; unsigned long flags; - if ((end - start) >= l2x0_size) { - l2x0_clean_all(); - return; - } - raw_spin_lock_irqsave(&l2x0_lock, flags); - start &= ~(CACHE_LINE_SIZE - 1); - while (start < end) { - unsigned long blk_end = start + min(end - start, 4096UL); - - while (start < blk_end) { - l2x0_clean_line(start); + if ((start | end) & (CACHE_LINE_SIZE - 1)) { + if (start & (CACHE_LINE_SIZE - 1)) { + start &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA); start += CACHE_LINE_SIZE; } - if (blk_end < end) { - raw_spin_unlock_irqrestore(&l2x0_lock, flags); - raw_spin_lock_irqsave(&l2x0_lock, flags); + if (end & (CACHE_LINE_SIZE - 1)) { + end &= ~(CACHE_LINE_SIZE - 1); + l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); + writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA); } } - cache_wait(base + L2X0_CLEAN_LINE_PA, 1); - cache_sync(); + + flags = l2c220_op_pa_range(base + L2X0_INV_LINE_PA, + start, end, flags); + l2c_wait_mask(base + L2X0_INV_LINE_PA, 1); + __l2c220_cache_sync(base); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_flush_range(unsigned long start, unsigned long end) +static void l2c220_clean_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; unsigned long flags; + start &= ~(CACHE_LINE_SIZE - 1); if ((end - start) >= l2x0_size) { - l2x0_flush_all(); + l2c220_op_way(base, L2X0_CLEAN_WAY); return; } raw_spin_lock_irqsave(&l2x0_lock, flags); + flags = l2c220_op_pa_range(base + L2X0_CLEAN_LINE_PA, + start, end, flags); + l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_flush_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + unsigned long flags; + start &= ~(CACHE_LINE_SIZE - 1); + if ((end - start) >= l2x0_size) { + l2c220_op_way(base, L2X0_CLEAN_INV_WAY); + return; + } + + raw_spin_lock_irqsave(&l2x0_lock, flags); + flags = l2c220_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, + start, end, flags); + l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_flush_all(void) +{ + l2c220_op_way(l2x0_base, L2X0_CLEAN_INV_WAY); +} + +static void l2c220_sync(void) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + __l2c220_cache_sync(l2x0_base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_enable(void __iomem *base, u32 aux, unsigned num_lock) +{ + /* + * Always enable non-secure access to the lockdown registers - + * we write to them as part of the L2C enable sequence so they + * need to be accessible. + */ + aux |= L220_AUX_CTRL_NS_LOCKDOWN; + + l2c_enable(base, aux, num_lock); +} + +static const struct l2c_init_data l2c220_data = { + .type = "L2C-220", + .way_size_0 = SZ_8K, + .num_lock = 1, + .enable = l2c220_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c220_inv_range, + .clean_range = l2c220_clean_range, + .flush_range = l2c220_flush_range, + .flush_all = l2c220_flush_all, + .disable = l2c_disable, + .sync = l2c220_sync, + .resume = l2c210_resume, + }, +}; + +/* + * L2C-310 specific code. + * + * Very similar to L2C-210, the PA, set/way and sync operations are atomic, + * and the way operations are all background tasks. However, issuing an + * operation while a background operation is in progress results in a + * SLVERR response. We can reuse: + * + * __l2c210_cache_sync (using sync_reg_offset) + * l2c210_sync + * l2c210_inv_range (if 588369 is not applicable) + * l2c210_clean_range + * l2c210_flush_range (if 588369 is not applicable) + * l2c210_flush_all (if 727915 is not applicable) + * + * Errata: + * 588369: PL310 R0P0->R1P0, fixed R2P0. + * Affects: all clean+invalidate operations + * clean and invalidate skips the invalidate step, so we need to issue + * separate operations. We also require the above debug workaround + * enclosing this code fragment on affected parts. On unaffected parts, + * we must not use this workaround without the debug register writes + * to avoid exposing a problem similar to 727915. + * + * 727915: PL310 R2P0->R3P0, fixed R3P1. + * Affects: clean+invalidate by way + * clean and invalidate by way runs in the background, and a store can + * hit the line between the clean operation and invalidate operation, + * resulting in the store being lost. + * + * 752271: PL310 R3P0->R3P1-50REL0, fixed R3P2. + * Affects: 8x64-bit (double fill) line fetches + * double fill line fetches can fail to cause dirty data to be evicted + * from the cache before the new data overwrites the second line. + * + * 753970: PL310 R3P0, fixed R3P1. + * Affects: sync + * prevents merging writes after the sync operation, until another L2C + * operation is performed (or a number of other conditions.) + * + * 769419: PL310 R0P0->R3P1, fixed R3P2. + * Affects: store buffer + * store buffer is not automatically drained. + */ +static void l2c310_inv_range_erratum(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + if ((start | end) & (CACHE_LINE_SIZE - 1)) { + unsigned long flags; + + /* Erratum 588369 for both clean+invalidate operations */ + raw_spin_lock_irqsave(&l2x0_lock, flags); + l2c_set_debug(base, 0x03); + + if (start & (CACHE_LINE_SIZE - 1)) { + start &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(start, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(start, base + L2X0_INV_LINE_PA); + start += CACHE_LINE_SIZE; + } + + if (end & (CACHE_LINE_SIZE - 1)) { + end &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(end, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(end, base + L2X0_INV_LINE_PA); + } + + l2c_set_debug(base, 0x00); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + } + + __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c310_flush_range_erratum(unsigned long start, unsigned long end) +{ + raw_spinlock_t *lock = &l2x0_lock; + unsigned long flags; + void __iomem *base = l2x0_base; + + raw_spin_lock_irqsave(lock, flags); while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); - debug_writel(0x03); + l2c_set_debug(base, 0x03); while (start < blk_end) { - l2x0_flush_line(start); + writel_relaxed(start, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(start, base + L2X0_INV_LINE_PA); start += CACHE_LINE_SIZE; } - debug_writel(0x00); + l2c_set_debug(base, 0x00); if (blk_end < end) { - raw_spin_unlock_irqrestore(&l2x0_lock, flags); - raw_spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(lock, flags); + raw_spin_lock_irqsave(lock, flags); } } - cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); - cache_sync(); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(lock, flags); + __l2c210_cache_sync(base); } -static void l2x0_disable(void) +static void l2c310_flush_all_erratum(void) { + void __iomem *base = l2x0_base; unsigned long flags; raw_spin_lock_irqsave(&l2x0_lock, flags); - __l2x0_flush_all(); - writel_relaxed(0, l2x0_base + L2X0_CTRL); - dsb(st); + l2c_set_debug(base, 0x03); + __l2c_op_way(base + L2X0_CLEAN_INV_WAY); + l2c_set_debug(base, 0x00); + __l2c210_cache_sync(base); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_unlock(u32 cache_id) +static void __init l2c310_save(void __iomem *base) { - int lockregs; - int i; + unsigned revision; - switch (cache_id & L2X0_CACHE_ID_PART_MASK) { - case L2X0_CACHE_ID_PART_L310: - lockregs = 8; - break; - case AURORA_CACHE_ID: - lockregs = 4; + l2c_save(base); + + l2x0_saved_regs.tag_latency = readl_relaxed(base + + L310_TAG_LATENCY_CTRL); + l2x0_saved_regs.data_latency = readl_relaxed(base + + L310_DATA_LATENCY_CTRL); + l2x0_saved_regs.filter_end = readl_relaxed(base + + L310_ADDR_FILTER_END); + l2x0_saved_regs.filter_start = readl_relaxed(base + + L310_ADDR_FILTER_START); + + revision = readl_relaxed(base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + /* From r2p0, there is Prefetch offset/control register */ + if (revision >= L310_CACHE_ID_RTL_R2P0) + l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base + + L310_PREFETCH_CTRL); + + /* From r3p0, there is Power control register */ + if (revision >= L310_CACHE_ID_RTL_R3P0) + l2x0_saved_regs.pwr_ctrl = readl_relaxed(base + + L310_POWER_CTRL); +} + +static void l2c310_resume(void) +{ + void __iomem *base = l2x0_base; + + if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) { + unsigned revision; + + /* restore pl310 setup */ + writel_relaxed(l2x0_saved_regs.tag_latency, + base + L310_TAG_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.data_latency, + base + L310_DATA_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.filter_end, + base + L310_ADDR_FILTER_END); + writel_relaxed(l2x0_saved_regs.filter_start, + base + L310_ADDR_FILTER_START); + + revision = readl_relaxed(base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + if (revision >= L310_CACHE_ID_RTL_R2P0) + l2c_write_sec(l2x0_saved_regs.prefetch_ctrl, base, + L310_PREFETCH_CTRL); + if (revision >= L310_CACHE_ID_RTL_R3P0) + l2c_write_sec(l2x0_saved_regs.pwr_ctrl, base, + L310_POWER_CTRL); + + l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8); + + /* Re-enable full-line-of-zeros for Cortex-A9 */ + if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO) + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); + } +} + +static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, void *data) +{ + switch (act & ~CPU_TASKS_FROZEN) { + case CPU_STARTING: + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); break; - default: - /* L210 and unknown types */ - lockregs = 1; + case CPU_DYING: + set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1))); break; } + return NOTIFY_OK; +} - for (i = 0; i < lockregs; i++) { - writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + - i * L2X0_LOCKDOWN_STRIDE); - writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + - i * L2X0_LOCKDOWN_STRIDE); +static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) +{ + unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK; + bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9; + + if (rev >= L310_CACHE_ID_RTL_R2P0) { + if (cortex_a9) { + aux |= L310_AUX_CTRL_EARLY_BRESP; + pr_info("L2C-310 enabling early BRESP for Cortex-A9\n"); + } else if (aux & L310_AUX_CTRL_EARLY_BRESP) { + pr_warn("L2C-310 early BRESP only supported with Cortex-A9\n"); + aux &= ~L310_AUX_CTRL_EARLY_BRESP; + } + } + + if (cortex_a9) { + u32 aux_cur = readl_relaxed(base + L2X0_AUX_CTRL); + u32 acr = get_auxcr(); + + pr_debug("Cortex-A9 ACR=0x%08x\n", acr); + + if (acr & BIT(3) && !(aux_cur & L310_AUX_CTRL_FULL_LINE_ZERO)) + pr_err("L2C-310: full line of zeros enabled in Cortex-A9 but not L2C-310 - invalid\n"); + + if (aux & L310_AUX_CTRL_FULL_LINE_ZERO && !(acr & BIT(3))) + pr_err("L2C-310: enabling full line of zeros but not enabled in Cortex-A9\n"); + + if (!(aux & L310_AUX_CTRL_FULL_LINE_ZERO) && !outer_cache.write_sec) { + aux |= L310_AUX_CTRL_FULL_LINE_ZERO; + pr_info("L2C-310 full line of zeros enabled for Cortex-A9\n"); + } + } else if (aux & (L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP)) { + pr_err("L2C-310: disabling Cortex-A9 specific feature bits\n"); + aux &= ~(L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP); + } + + if (aux & (L310_AUX_CTRL_DATA_PREFETCH | L310_AUX_CTRL_INSTR_PREFETCH)) { + u32 prefetch = readl_relaxed(base + L310_PREFETCH_CTRL); + + pr_info("L2C-310 %s%s prefetch enabled, offset %u lines\n", + aux & L310_AUX_CTRL_INSTR_PREFETCH ? "I" : "", + aux & L310_AUX_CTRL_DATA_PREFETCH ? "D" : "", + 1 + (prefetch & L310_PREFETCH_CTRL_OFFSET_MASK)); + } + + /* r3p0 or later has power control register */ + if (rev >= L310_CACHE_ID_RTL_R3P0) { + u32 power_ctrl; + + l2c_write_sec(L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN, + base, L310_POWER_CTRL); + power_ctrl = readl_relaxed(base + L310_POWER_CTRL); + pr_info("L2C-310 dynamic clock gating %sabled, standby mode %sabled\n", + power_ctrl & L310_DYNAMIC_CLK_GATING_EN ? "en" : "dis", + power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis"); + } + + /* + * Always enable non-secure access to the lockdown registers - + * we write to them as part of the L2C enable sequence so they + * need to be accessible. + */ + aux |= L310_AUX_CTRL_NS_LOCKDOWN; + + l2c_enable(base, aux, num_lock); + + if (aux & L310_AUX_CTRL_FULL_LINE_ZERO) { + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); + cpu_notifier(l2c310_cpu_enable_flz, 0); } } -void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) +static void __init l2c310_fixup(void __iomem *base, u32 cache_id, + struct outer_cache_fns *fns) { - u32 aux; - u32 cache_id; - u32 way_size = 0; - int ways; - int way_size_shift = L2X0_WAY_SIZE_SHIFT; - const char *type; + unsigned revision = cache_id & L2X0_CACHE_ID_RTL_MASK; + const char *errata[8]; + unsigned n = 0; + + if (IS_ENABLED(CONFIG_PL310_ERRATA_588369) && + revision < L310_CACHE_ID_RTL_R2P0 && + /* For bcm compatibility */ + fns->inv_range == l2c210_inv_range) { + fns->inv_range = l2c310_inv_range_erratum; + fns->flush_range = l2c310_flush_range_erratum; + errata[n++] = "588369"; + } - l2x0_base = base; - if (cache_id_part_number_from_dt) - cache_id = cache_id_part_number_from_dt; - else - cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); - aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); + if (IS_ENABLED(CONFIG_PL310_ERRATA_727915) && + revision >= L310_CACHE_ID_RTL_R2P0 && + revision < L310_CACHE_ID_RTL_R3P1) { + fns->flush_all = l2c310_flush_all_erratum; + errata[n++] = "727915"; + } + + if (revision >= L310_CACHE_ID_RTL_R3P0 && + revision < L310_CACHE_ID_RTL_R3P2) { + u32 val = readl_relaxed(base + L310_PREFETCH_CTRL); + /* I don't think bit23 is required here... but iMX6 does so */ + if (val & (BIT(30) | BIT(23))) { + val &= ~(BIT(30) | BIT(23)); + l2c_write_sec(val, base, L310_PREFETCH_CTRL); + errata[n++] = "752271"; + } + } + + if (IS_ENABLED(CONFIG_PL310_ERRATA_753970) && + revision == L310_CACHE_ID_RTL_R3P0) { + sync_reg_offset = L2X0_DUMMY_REG; + errata[n++] = "753970"; + } + + if (IS_ENABLED(CONFIG_PL310_ERRATA_769419)) + errata[n++] = "769419"; + + if (n) { + unsigned i; + pr_info("L2C-310 errat%s", n > 1 ? "a" : "um"); + for (i = 0; i < n; i++) + pr_cont(" %s", errata[i]); + pr_cont(" enabled\n"); + } +} + +static void l2c310_disable(void) +{ + /* + * If full-line-of-zeros is enabled, we must first disable it in the + * Cortex-A9 auxiliary control register before disabling the L2 cache. + */ + if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO) + set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1))); + + l2c_disable(); +} + +static const struct l2c_init_data l2c310_init_fns __initconst = { + .type = "L2C-310", + .way_size_0 = SZ_8K, + .num_lock = 8, + .enable = l2c310_enable, + .fixup = l2c310_fixup, + .save = l2c310_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .sync = l2c210_sync, + .resume = l2c310_resume, + }, +}; + +static void __init __l2c_init(const struct l2c_init_data *data, + u32 aux_val, u32 aux_mask, u32 cache_id) +{ + struct outer_cache_fns fns; + unsigned way_size_bits, ways; + u32 aux, old_aux; + + /* + * Sanity check the aux values. aux_mask is the bits we preserve + * from reading the hardware register, and aux_val is the bits we + * set. + */ + if (aux_val & aux_mask) + pr_alert("L2C: platform provided aux values permit register corruption.\n"); + + old_aux = aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); aux &= aux_mask; aux |= aux_val; + if (old_aux != aux) + pr_warn("L2C: DT/platform modifies aux control register: 0x%08x -> 0x%08x\n", + old_aux, aux); + /* Determine the number of ways */ switch (cache_id & L2X0_CACHE_ID_PART_MASK) { case L2X0_CACHE_ID_PART_L310: + if ((aux_val | ~aux_mask) & (L2C_AUX_CTRL_WAY_SIZE_MASK | L310_AUX_CTRL_ASSOCIATIVITY_16)) + pr_warn("L2C: DT/platform tries to modify or specify cache size\n"); if (aux & (1 << 16)) ways = 16; else ways = 8; - type = "L310"; -#ifdef CONFIG_PL310_ERRATA_753970 - /* Unmapped register. */ - sync_reg_offset = L2X0_DUMMY_REG; -#endif - if ((cache_id & L2X0_CACHE_ID_RTL_MASK) <= L2X0_CACHE_ID_RTL_R3P0) - outer_cache.set_debug = pl310_set_debug; break; + case L2X0_CACHE_ID_PART_L210: + case L2X0_CACHE_ID_PART_L220: ways = (aux >> 13) & 0xf; - type = "L210"; break; case AURORA_CACHE_ID: - sync_reg_offset = AURORA_SYNC_REG; ways = (aux >> 13) & 0xf; ways = 2 << ((ways + 1) >> 2); - way_size_shift = AURORA_WAY_SIZE_SHIFT; - type = "Aurora"; break; + default: /* Assume unknown chips have 8 ways */ ways = 8; - type = "L2x0 series"; break; } l2x0_way_mask = (1 << ways) - 1; /* - * L2 cache Size = Way size * Number of ways + * way_size_0 is the size that a way_size value of zero would be + * given the calculation: way_size = way_size_0 << way_size_bits. + * So, if way_size_bits=0 is reserved, but way_size_bits=1 is 16k, + * then way_size_0 would be 8k. + * + * L2 cache size = number of ways * way size. */ - way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17; - way_size = 1 << (way_size + way_size_shift); + way_size_bits = (aux & L2C_AUX_CTRL_WAY_SIZE_MASK) >> + L2C_AUX_CTRL_WAY_SIZE_SHIFT; + l2x0_size = ways * (data->way_size_0 << way_size_bits); - l2x0_size = ways * way_size * SZ_1K; + fns = data->outer_cache; + fns.write_sec = outer_cache.write_sec; + if (data->fixup) + data->fixup(l2x0_base, cache_id, &fns); /* - * Check if l2x0 controller is already enabled. - * If you are booting from non-secure mode - * accessing the below registers will fault. + * Check if l2x0 controller is already enabled. If we are booting + * in non-secure mode accessing the below registers will fault. */ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - /* Make sure that I&D is not locked down when starting */ - l2x0_unlock(cache_id); + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) + data->enable(l2x0_base, aux, data->num_lock); - /* l2x0 controller is disabled */ - writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL); + outer_cache = fns; - l2x0_inv_all(); - - /* enable L2X0 */ - writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL); - } + /* + * It is strange to save the register state before initialisation, + * but hey, this is what the DT implementations decided to do. + */ + if (data->save) + data->save(l2x0_base); /* Re-read it in case some bits are reserved. */ aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); - /* Save the value for resuming. */ - l2x0_saved_regs.aux_ctrl = aux; + pr_info("%s cache controller enabled, %d ways, %d kB\n", + data->type, ways, l2x0_size >> 10); + pr_info("%s: CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n", + data->type, cache_id, aux); +} + +void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) +{ + const struct l2c_init_data *data; + u32 cache_id; + + l2x0_base = base; + + cache_id = readl_relaxed(base + L2X0_CACHE_ID); + + switch (cache_id & L2X0_CACHE_ID_PART_MASK) { + default: + case L2X0_CACHE_ID_PART_L210: + data = &l2c210_data; + break; - if (!of_init) { - outer_cache.inv_range = l2x0_inv_range; - outer_cache.clean_range = l2x0_clean_range; - outer_cache.flush_range = l2x0_flush_range; - outer_cache.sync = l2x0_cache_sync; - outer_cache.flush_all = l2x0_flush_all; - outer_cache.inv_all = l2x0_inv_all; - outer_cache.disable = l2x0_disable; + case L2X0_CACHE_ID_PART_L220: + data = &l2c220_data; + break; + + case L2X0_CACHE_ID_PART_L310: + data = &l2c310_init_fns; + break; } - pr_info("%s cache controller enabled\n", type); - pr_info("l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d kB\n", - ways, cache_id, aux, l2x0_size >> 10); + __l2c_init(data, aux_val, aux_mask, cache_id); } #ifdef CONFIG_OF static int l2_wt_override; +/* Aurora don't have the cache ID register available, so we have to + * pass it though the device tree */ +static u32 cache_id_part_number_from_dt; + +static void __init l2x0_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 data[2] = { 0, 0 }; + u32 tag = 0; + u32 dirty = 0; + u32 val = 0, mask = 0; + + of_property_read_u32(np, "arm,tag-latency", &tag); + if (tag) { + mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK; + val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT; + } + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1]) { + mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK | + L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK; + val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) | + ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT); + } + + of_property_read_u32(np, "arm,dirty-latency", &dirty); + if (dirty) { + mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK; + val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + +static const struct l2c_init_data of_l2c210_data __initconst = { + .type = "L2C-210", + .way_size_0 = SZ_8K, + .num_lock = 1, + .of_parse = l2x0_of_parse, + .enable = l2c_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c_disable, + .sync = l2c210_sync, + .resume = l2c210_resume, + }, +}; + +static const struct l2c_init_data of_l2c220_data __initconst = { + .type = "L2C-220", + .way_size_0 = SZ_8K, + .num_lock = 1, + .of_parse = l2x0_of_parse, + .enable = l2c220_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c220_inv_range, + .clean_range = l2c220_clean_range, + .flush_range = l2c220_flush_range, + .flush_all = l2c220_flush_all, + .disable = l2c_disable, + .sync = l2c220_sync, + .resume = l2c210_resume, + }, +}; + +static void __init l2c310_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 data[3] = { 0, 0, 0 }; + u32 tag[3] = { 0, 0, 0 }; + u32 filter[2] = { 0, 0 }; + + of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); + if (tag[0] && tag[1] && tag[2]) + writel_relaxed( + L310_LATENCY_CTRL_RD(tag[0] - 1) | + L310_LATENCY_CTRL_WR(tag[1] - 1) | + L310_LATENCY_CTRL_SETUP(tag[2] - 1), + l2x0_base + L310_TAG_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1] && data[2]) + writel_relaxed( + L310_LATENCY_CTRL_RD(data[0] - 1) | + L310_LATENCY_CTRL_WR(data[1] - 1) | + L310_LATENCY_CTRL_SETUP(data[2] - 1), + l2x0_base + L310_DATA_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,filter-ranges", + filter, ARRAY_SIZE(filter)); + if (filter[1]) { + writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M), + l2x0_base + L310_ADDR_FILTER_END); + writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L310_ADDR_FILTER_EN, + l2x0_base + L310_ADDR_FILTER_START); + } +} + +static const struct l2c_init_data of_l2c310_data __initconst = { + .type = "L2C-310", + .way_size_0 = SZ_8K, + .num_lock = 8, + .of_parse = l2c310_of_parse, + .enable = l2c310_enable, + .fixup = l2c310_fixup, + .save = l2c310_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .sync = l2c210_sync, + .resume = l2c310_resume, + }, +}; + /* * Note that the end addresses passed to Linux primitives are * noninclusive, while the hardware cache range operations use @@ -524,6 +1166,100 @@ static void aurora_flush_range(unsigned long start, unsigned long end) } } +static void aurora_save(void __iomem *base) +{ + l2x0_saved_regs.ctrl = readl_relaxed(base + L2X0_CTRL); + l2x0_saved_regs.aux_ctrl = readl_relaxed(base + L2X0_AUX_CTRL); +} + +static void aurora_resume(void) +{ + void __iomem *base = l2x0_base; + + if (!(readl(base + L2X0_CTRL) & L2X0_CTRL_EN)) { + writel_relaxed(l2x0_saved_regs.aux_ctrl, base + L2X0_AUX_CTRL); + writel_relaxed(l2x0_saved_regs.ctrl, base + L2X0_CTRL); + } +} + +/* + * For Aurora cache in no outer mode, enable via the CP15 coprocessor + * broadcasting of cache commands to L2. + */ +static void __init aurora_enable_no_outer(void __iomem *base, u32 aux, + unsigned num_lock) +{ + u32 u; + + asm volatile("mrc p15, 1, %0, c15, c2, 0" : "=r" (u)); + u |= AURORA_CTRL_FW; /* Set the FW bit */ + asm volatile("mcr p15, 1, %0, c15, c2, 0" : : "r" (u)); + + isb(); + + l2c_enable(base, aux, num_lock); +} + +static void __init aurora_fixup(void __iomem *base, u32 cache_id, + struct outer_cache_fns *fns) +{ + sync_reg_offset = AURORA_SYNC_REG; +} + +static void __init aurora_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU; + u32 mask = AURORA_ACR_REPLACEMENT_MASK; + + of_property_read_u32(np, "cache-id-part", + &cache_id_part_number_from_dt); + + /* Determine and save the write policy */ + l2_wt_override = of_property_read_bool(np, "wt-override"); + + if (l2_wt_override) { + val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY; + mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + +static const struct l2c_init_data of_aurora_with_outer_data __initconst = { + .type = "Aurora", + .way_size_0 = SZ_4K, + .num_lock = 4, + .of_parse = aurora_of_parse, + .enable = l2c_enable, + .fixup = aurora_fixup, + .save = aurora_save, + .outer_cache = { + .inv_range = aurora_inv_range, + .clean_range = aurora_clean_range, + .flush_range = aurora_flush_range, + .flush_all = l2x0_flush_all, + .disable = l2x0_disable, + .sync = l2x0_cache_sync, + .resume = aurora_resume, + }, +}; + +static const struct l2c_init_data of_aurora_no_outer_data __initconst = { + .type = "Aurora", + .way_size_0 = SZ_4K, + .num_lock = 4, + .of_parse = aurora_of_parse, + .enable = aurora_enable_no_outer, + .fixup = aurora_fixup, + .save = aurora_save, + .outer_cache = { + .resume = aurora_resume, + }, +}; + /* * For certain Broadcom SoCs, depending on the address range, different offsets * need to be added to the address before passing it to L2 for @@ -588,16 +1324,16 @@ static void bcm_inv_range(unsigned long start, unsigned long end) /* normal case, no cross section between start and end */ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { - l2x0_inv_range(new_start, new_end); + l2c210_inv_range(new_start, new_end); return; } /* They cross sections, so it can only be a cross from section * 2 to section 3 */ - l2x0_inv_range(new_start, + l2c210_inv_range(new_start, bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); - l2x0_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + l2c210_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), new_end); } @@ -610,26 +1346,21 @@ static void bcm_clean_range(unsigned long start, unsigned long end) if (unlikely(end <= start)) return; - if ((end - start) >= l2x0_size) { - l2x0_clean_all(); - return; - } - new_start = bcm_l2_phys_addr(start); new_end = bcm_l2_phys_addr(end); /* normal case, no cross section between start and end */ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { - l2x0_clean_range(new_start, new_end); + l2c210_clean_range(new_start, new_end); return; } /* They cross sections, so it can only be a cross from section * 2 to section 3 */ - l2x0_clean_range(new_start, + l2c210_clean_range(new_start, bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); - l2x0_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + l2c210_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), new_end); } @@ -643,7 +1374,7 @@ static void bcm_flush_range(unsigned long start, unsigned long end) return; if ((end - start) >= l2x0_size) { - l2x0_flush_all(); + outer_cache.flush_all(); return; } @@ -652,283 +1383,67 @@ static void bcm_flush_range(unsigned long start, unsigned long end) /* normal case, no cross section between start and end */ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { - l2x0_flush_range(new_start, new_end); + l2c210_flush_range(new_start, new_end); return; } /* They cross sections, so it can only be a cross from section * 2 to section 3 */ - l2x0_flush_range(new_start, + l2c210_flush_range(new_start, bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); - l2x0_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + l2c210_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), new_end); } -static void __init l2x0_of_setup(const struct device_node *np, - u32 *aux_val, u32 *aux_mask) -{ - u32 data[2] = { 0, 0 }; - u32 tag = 0; - u32 dirty = 0; - u32 val = 0, mask = 0; - - of_property_read_u32(np, "arm,tag-latency", &tag); - if (tag) { - mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK; - val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT; - } - - of_property_read_u32_array(np, "arm,data-latency", - data, ARRAY_SIZE(data)); - if (data[0] && data[1]) { - mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK | - L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK; - val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) | - ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT); - } - - of_property_read_u32(np, "arm,dirty-latency", &dirty); - if (dirty) { - mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK; - val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; - } - - *aux_val &= ~mask; - *aux_val |= val; - *aux_mask &= ~mask; -} - -static void __init pl310_of_setup(const struct device_node *np, - u32 *aux_val, u32 *aux_mask) -{ - u32 data[3] = { 0, 0, 0 }; - u32 tag[3] = { 0, 0, 0 }; - u32 filter[2] = { 0, 0 }; - - of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); - if (tag[0] && tag[1] && tag[2]) - writel_relaxed( - ((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | - ((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | - ((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), - l2x0_base + L2X0_TAG_LATENCY_CTRL); - - of_property_read_u32_array(np, "arm,data-latency", - data, ARRAY_SIZE(data)); - if (data[0] && data[1] && data[2]) - writel_relaxed( - ((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | - ((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | - ((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), - l2x0_base + L2X0_DATA_LATENCY_CTRL); - - of_property_read_u32_array(np, "arm,filter-ranges", - filter, ARRAY_SIZE(filter)); - if (filter[1]) { - writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M), - l2x0_base + L2X0_ADDR_FILTER_END); - writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN, - l2x0_base + L2X0_ADDR_FILTER_START); - } -} - -static void __init pl310_save(void) -{ - u32 l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & - L2X0_CACHE_ID_RTL_MASK; - - l2x0_saved_regs.tag_latency = readl_relaxed(l2x0_base + - L2X0_TAG_LATENCY_CTRL); - l2x0_saved_regs.data_latency = readl_relaxed(l2x0_base + - L2X0_DATA_LATENCY_CTRL); - l2x0_saved_regs.filter_end = readl_relaxed(l2x0_base + - L2X0_ADDR_FILTER_END); - l2x0_saved_regs.filter_start = readl_relaxed(l2x0_base + - L2X0_ADDR_FILTER_START); - - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { - /* - * From r2p0, there is Prefetch offset/control register - */ - l2x0_saved_regs.prefetch_ctrl = readl_relaxed(l2x0_base + - L2X0_PREFETCH_CTRL); - /* - * From r3p0, there is Power control register - */ - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) - l2x0_saved_regs.pwr_ctrl = readl_relaxed(l2x0_base + - L2X0_POWER_CTRL); - } -} +/* Broadcom L2C-310 start from ARMs R3P2 or later, and require no fixups */ +static const struct l2c_init_data of_bcm_l2x0_data __initconst = { + .type = "BCM-L2C-310", + .way_size_0 = SZ_8K, + .num_lock = 8, + .of_parse = l2c310_of_parse, + .enable = l2c310_enable, + .save = l2c310_save, + .outer_cache = { + .inv_range = bcm_inv_range, + .clean_range = bcm_clean_range, + .flush_range = bcm_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .sync = l2c210_sync, + .resume = l2c310_resume, + }, +}; -static void aurora_save(void) +static void __init tauros3_save(void __iomem *base) { - l2x0_saved_regs.ctrl = readl_relaxed(l2x0_base + L2X0_CTRL); - l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); -} + l2c_save(base); -static void __init tauros3_save(void) -{ l2x0_saved_regs.aux2_ctrl = - readl_relaxed(l2x0_base + TAUROS3_AUX2_CTRL); + readl_relaxed(base + TAUROS3_AUX2_CTRL); l2x0_saved_regs.prefetch_ctrl = - readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); -} - -static void l2x0_resume(void) -{ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - /* restore aux ctrl and enable l2 */ - l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID)); - - writel_relaxed(l2x0_saved_regs.aux_ctrl, l2x0_base + - L2X0_AUX_CTRL); - - l2x0_inv_all(); - - writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL); - } -} - -static void pl310_resume(void) -{ - u32 l2x0_revision; - - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - /* restore pl310 setup */ - writel_relaxed(l2x0_saved_regs.tag_latency, - l2x0_base + L2X0_TAG_LATENCY_CTRL); - writel_relaxed(l2x0_saved_regs.data_latency, - l2x0_base + L2X0_DATA_LATENCY_CTRL); - writel_relaxed(l2x0_saved_regs.filter_end, - l2x0_base + L2X0_ADDR_FILTER_END); - writel_relaxed(l2x0_saved_regs.filter_start, - l2x0_base + L2X0_ADDR_FILTER_START); - - l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & - L2X0_CACHE_ID_RTL_MASK; - - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { - writel_relaxed(l2x0_saved_regs.prefetch_ctrl, - l2x0_base + L2X0_PREFETCH_CTRL); - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) - writel_relaxed(l2x0_saved_regs.pwr_ctrl, - l2x0_base + L2X0_POWER_CTRL); - } - } - - l2x0_resume(); -} - -static void aurora_resume(void) -{ - if (!(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - writel_relaxed(l2x0_saved_regs.aux_ctrl, - l2x0_base + L2X0_AUX_CTRL); - writel_relaxed(l2x0_saved_regs.ctrl, l2x0_base + L2X0_CTRL); - } + readl_relaxed(base + L310_PREFETCH_CTRL); } static void tauros3_resume(void) { - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { + void __iomem *base = l2x0_base; + + if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) { writel_relaxed(l2x0_saved_regs.aux2_ctrl, - l2x0_base + TAUROS3_AUX2_CTRL); + base + TAUROS3_AUX2_CTRL); writel_relaxed(l2x0_saved_regs.prefetch_ctrl, - l2x0_base + L2X0_PREFETCH_CTRL); - } + base + L310_PREFETCH_CTRL); - l2x0_resume(); -} - -static void __init aurora_broadcast_l2_commands(void) -{ - __u32 u; - /* Enable Broadcasting of cache commands to L2*/ - __asm__ __volatile__("mrc p15, 1, %0, c15, c2, 0" : "=r"(u)); - u |= AURORA_CTRL_FW; /* Set the FW bit */ - __asm__ __volatile__("mcr p15, 1, %0, c15, c2, 0\n" : : "r"(u)); - isb(); -} - -static void __init aurora_of_setup(const struct device_node *np, - u32 *aux_val, u32 *aux_mask) -{ - u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU; - u32 mask = AURORA_ACR_REPLACEMENT_MASK; - - of_property_read_u32(np, "cache-id-part", - &cache_id_part_number_from_dt); - - /* Determine and save the write policy */ - l2_wt_override = of_property_read_bool(np, "wt-override"); - - if (l2_wt_override) { - val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY; - mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK; + l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8); } - - *aux_val &= ~mask; - *aux_val |= val; - *aux_mask &= ~mask; } -static const struct l2x0_of_data pl310_data = { - .setup = pl310_of_setup, - .save = pl310_save, - .outer_cache = { - .resume = pl310_resume, - .inv_range = l2x0_inv_range, - .clean_range = l2x0_clean_range, - .flush_range = l2x0_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - -static const struct l2x0_of_data l2x0_data = { - .setup = l2x0_of_setup, - .save = NULL, - .outer_cache = { - .resume = l2x0_resume, - .inv_range = l2x0_inv_range, - .clean_range = l2x0_clean_range, - .flush_range = l2x0_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - -static const struct l2x0_of_data aurora_with_outer_data = { - .setup = aurora_of_setup, - .save = aurora_save, - .outer_cache = { - .resume = aurora_resume, - .inv_range = aurora_inv_range, - .clean_range = aurora_clean_range, - .flush_range = aurora_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - -static const struct l2x0_of_data aurora_no_outer_data = { - .setup = aurora_of_setup, - .save = aurora_save, - .outer_cache = { - .resume = aurora_resume, - }, -}; - -static const struct l2x0_of_data tauros3_data = { - .setup = NULL, +static const struct l2c_init_data of_tauros3_data __initconst = { + .type = "Tauros3", + .way_size_0 = SZ_8K, + .num_lock = 8, + .enable = l2c_enable, .save = tauros3_save, /* Tauros3 broadcasts L1 cache operations to L2 */ .outer_cache = { @@ -936,43 +1451,26 @@ static const struct l2x0_of_data tauros3_data = { }, }; -static const struct l2x0_of_data bcm_l2x0_data = { - .setup = pl310_of_setup, - .save = pl310_save, - .outer_cache = { - .resume = pl310_resume, - .inv_range = bcm_inv_range, - .clean_range = bcm_clean_range, - .flush_range = bcm_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - +#define L2C_ID(name, fns) { .compatible = name, .data = (void *)&fns } static const struct of_device_id l2x0_ids[] __initconst = { - { .compatible = "arm,l210-cache", .data = (void *)&l2x0_data }, - { .compatible = "arm,l220-cache", .data = (void *)&l2x0_data }, - { .compatible = "arm,pl310-cache", .data = (void *)&pl310_data }, - { .compatible = "bcm,bcm11351-a2-pl310-cache", /* deprecated name */ - .data = (void *)&bcm_l2x0_data}, - { .compatible = "brcm,bcm11351-a2-pl310-cache", - .data = (void *)&bcm_l2x0_data}, - { .compatible = "marvell,aurora-outer-cache", - .data = (void *)&aurora_with_outer_data}, - { .compatible = "marvell,aurora-system-cache", - .data = (void *)&aurora_no_outer_data}, - { .compatible = "marvell,tauros3-cache", - .data = (void *)&tauros3_data }, + L2C_ID("arm,l210-cache", of_l2c210_data), + L2C_ID("arm,l220-cache", of_l2c220_data), + L2C_ID("arm,pl310-cache", of_l2c310_data), + L2C_ID("brcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data), + L2C_ID("marvell,aurora-outer-cache", of_aurora_with_outer_data), + L2C_ID("marvell,aurora-system-cache", of_aurora_no_outer_data), + L2C_ID("marvell,tauros3-cache", of_tauros3_data), + /* Deprecated IDs */ + L2C_ID("bcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data), {} }; int __init l2x0_of_init(u32 aux_val, u32 aux_mask) { + const struct l2c_init_data *data; struct device_node *np; - const struct l2x0_of_data *data; struct resource res; + u32 cache_id, old_aux; np = of_find_matching_node(NULL, l2x0_ids); if (!np) @@ -989,23 +1487,29 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) data = of_match_node(l2x0_ids, np)->data; - /* L2 configuration can only be changed if the cache is disabled */ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - if (data->setup) - data->setup(np, &aux_val, &aux_mask); - - /* For aurora cache in no outer mode select the - * correct mode using the coprocessor*/ - if (data == &aurora_no_outer_data) - aurora_broadcast_l2_commands(); + old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); + if (old_aux != ((old_aux & aux_mask) | aux_val)) { + pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n", + old_aux, (old_aux & aux_mask) | aux_val); + } else if (aux_mask != ~0U && aux_val != 0) { + pr_alert("L2C: platform provided aux values match the hardware, so have no effect. Please remove them.\n"); } - if (data->save) - data->save(); + /* All L2 caches are unified, so this property should be specified */ + if (!of_property_read_bool(np, "cache-unified")) + pr_err("L2C: device tree omits to specify unified cache\n"); + + /* L2 configuration can only be changed if the cache is disabled */ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) + if (data->of_parse) + data->of_parse(np, &aux_val, &aux_mask); + + if (cache_id_part_number_from_dt) + cache_id = cache_id_part_number_from_dt; + else + cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); - of_init = true; - memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache)); - l2x0_init(l2x0_base, aux_val, aux_mask); + __l2c_init(data, aux_val, aux_mask, cache_id); return 0; } diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 778bcf88ee79..615c99e38ba1 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -59,7 +59,7 @@ ENTRY(v7_invalidate_l1) bgt 2b cmp r2, #0 bgt 1b - dsb + dsb st isb mov pc, lr ENDPROC(v7_invalidate_l1) @@ -166,7 +166,7 @@ skip: finished: mov r10, #0 @ swith back to cache level 0 mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr - dsb + dsb st isb mov pc, lr ENDPROC(v7_flush_dcache_all) @@ -335,7 +335,7 @@ ENTRY(v7_flush_kern_dcache_area) add r0, r0, r2 cmp r0, r1 blo 1b - dsb + dsb st mov pc, lr ENDPROC(v7_flush_kern_dcache_area) @@ -368,7 +368,7 @@ v7_dma_inv_range: add r0, r0, r2 cmp r0, r1 blo 1b - dsb + dsb st mov pc, lr ENDPROC(v7_dma_inv_range) @@ -390,7 +390,7 @@ v7_dma_clean_range: add r0, r0, r2 cmp r0, r1 blo 1b - dsb + dsb st mov pc, lr ENDPROC(v7_dma_clean_range) @@ -412,7 +412,7 @@ ENTRY(v7_dma_flush_range) add r0, r0, r2 cmp r0, r1 blo 1b - dsb + dsb st mov pc, lr ENDPROC(v7_dma_flush_range) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 5bef858568e6..4c88935654ca 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -885,7 +885,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, static void __dma_page_cpu_to_dev(struct page *page, unsigned long off, size_t size, enum dma_data_direction dir) { - unsigned long paddr; + phys_addr_t paddr; dma_cache_maint_page(page, off, size, dir, dmac_map_area); @@ -901,14 +901,15 @@ static void __dma_page_cpu_to_dev(struct page *page, unsigned long off, static void __dma_page_dev_to_cpu(struct page *page, unsigned long off, size_t size, enum dma_data_direction dir) { - unsigned long paddr = page_to_phys(page) + off; + phys_addr_t paddr = page_to_phys(page) + off; /* FIXME: non-speculating: not required */ - /* don't bother invalidating if DMA to device */ - if (dir != DMA_TO_DEVICE) + /* in any case, don't bother invalidating if DMA to device */ + if (dir != DMA_TO_DEVICE) { outer_inv_range(paddr, paddr + size); - dma_cache_maint_page(page, off, size, dir, dmac_unmap_area); + dma_cache_maint_page(page, off, size, dir, dmac_unmap_area); + } /* * Mark the D-cache clean for these pages to avoid extra flushing. diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 3387e60e4ea3..43d54f5b26b9 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -104,17 +104,20 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig #define flush_icache_alias(pfn,vaddr,len) do { } while (0) #endif +#define FLAG_PA_IS_EXEC 1 +#define FLAG_PA_CORE_IN_MM 2 + static void flush_ptrace_access_other(void *args) { __flush_icache_all(); } -static -void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, - unsigned long uaddr, void *kaddr, unsigned long len) +static inline +void __flush_ptrace_access(struct page *page, unsigned long uaddr, void *kaddr, + unsigned long len, unsigned int flags) { if (cache_is_vivt()) { - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { + if (flags & FLAG_PA_CORE_IN_MM) { unsigned long addr = (unsigned long)kaddr; __cpuc_coherent_kern_range(addr, addr + len); } @@ -128,7 +131,7 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, } /* VIPT non-aliasing D-cache */ - if (vma->vm_flags & VM_EXEC) { + if (flags & FLAG_PA_IS_EXEC) { unsigned long addr = (unsigned long)kaddr; if (icache_is_vipt_aliasing()) flush_icache_alias(page_to_pfn(page), uaddr, len); @@ -140,6 +143,26 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, } } +static +void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, + unsigned long uaddr, void *kaddr, unsigned long len) +{ + unsigned int flags = 0; + if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) + flags |= FLAG_PA_CORE_IN_MM; + if (vma->vm_flags & VM_EXEC) + flags |= FLAG_PA_IS_EXEC; + __flush_ptrace_access(page, uaddr, kaddr, len, flags); +} + +void flush_uprobe_xol_access(struct page *page, unsigned long uaddr, + void *kaddr, unsigned long len) +{ + unsigned int flags = FLAG_PA_CORE_IN_MM|FLAG_PA_IS_EXEC; + + __flush_ptrace_access(page, uaddr, kaddr, len, flags); +} + /* * Copy user data from/to a page which is mapped into a different * processes address space. Really, we want to allow our "user diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index 21b9e1bf9b77..45aeaaca9052 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -18,6 +18,21 @@ #include <asm/tlbflush.h> #include "mm.h" +pte_t *fixmap_page_table; + +static inline void set_fixmap_pte(int idx, pte_t pte) +{ + unsigned long vaddr = __fix_to_virt(idx); + set_pte_ext(fixmap_page_table + idx, pte, 0); + local_flush_tlb_kernel_page(vaddr); +} + +static inline pte_t get_fixmap_pte(unsigned long vaddr) +{ + unsigned long idx = __virt_to_fix(vaddr); + return *(fixmap_page_table + idx); +} + void *kmap(struct page *page) { might_sleep(); @@ -63,20 +78,20 @@ void *kmap_atomic(struct page *page) type = kmap_atomic_idx_push(); idx = type + KM_TYPE_NR * smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); + vaddr = __fix_to_virt(idx); #ifdef CONFIG_DEBUG_HIGHMEM /* * With debugging enabled, kunmap_atomic forces that entry to 0. * Make sure it was indeed properly unmapped. */ - BUG_ON(!pte_none(get_top_pte(vaddr))); + BUG_ON(!pte_none(*(fixmap_page_table + idx))); #endif /* * When debugging is off, kunmap_atomic leaves the previous mapping * in place, so the contained TLB flush ensures the TLB is updated * with the new mapping. */ - set_top_pte(vaddr, mk_pte(page, kmap_prot)); + set_fixmap_pte(idx, mk_pte(page, kmap_prot)); return (void *)vaddr; } @@ -94,8 +109,8 @@ void __kunmap_atomic(void *kvaddr) if (cache_is_vivt()) __cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE); #ifdef CONFIG_DEBUG_HIGHMEM - BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); - set_top_pte(vaddr, __pte(0)); + BUG_ON(vaddr != __fix_to_virt(idx)); + set_fixmap_pte(idx, __pte(0)); #else (void) idx; /* to kill a warning */ #endif @@ -117,11 +132,11 @@ void *kmap_atomic_pfn(unsigned long pfn) type = kmap_atomic_idx_push(); idx = type + KM_TYPE_NR * smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); + vaddr = __fix_to_virt(idx); #ifdef CONFIG_DEBUG_HIGHMEM - BUG_ON(!pte_none(get_top_pte(vaddr))); + BUG_ON(!pte_none(*(fixmap_page_table + idx))); #endif - set_top_pte(vaddr, pfn_pte(pfn, kmap_prot)); + set_fixmap_pte(idx, pfn_pte(pfn, kmap_prot)); return (void *)vaddr; } @@ -133,5 +148,5 @@ struct page *kmap_atomic_to_page(const void *ptr) if (vaddr < FIXADDR_START) return virt_to_page(ptr); - return pte_page(get_top_pte(vaddr)); + return pte_page(get_fixmap_pte(vaddr)); } diff --git a/arch/arm/mm/hugetlbpage.c b/arch/arm/mm/hugetlbpage.c index 54ee6163c181..66781bf34077 100644 --- a/arch/arm/mm/hugetlbpage.c +++ b/arch/arm/mm/hugetlbpage.c @@ -56,8 +56,3 @@ int pmd_huge(pmd_t pmd) { return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT); } - -int pmd_huge_support(void) -{ - return 1; -} diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 2a77ba8796ae..659c75d808dc 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -23,6 +23,7 @@ #include <linux/dma-contiguous.h> #include <linux/sizes.h> +#include <asm/cp15.h> #include <asm/mach-types.h> #include <asm/memblock.h> #include <asm/prom.h> @@ -36,6 +37,14 @@ #include "mm.h" +#ifdef CONFIG_CPU_CP15_MMU +unsigned long __init __clear_cr(unsigned long mask) +{ + cr_alignment = cr_alignment & ~mask; + return cr_alignment; +} +#endif + static phys_addr_t phys_initrd_start __initdata = 0; static unsigned long phys_initrd_size __initdata = 0; @@ -81,24 +90,21 @@ __tagtable(ATAG_INITRD2, parse_tag_initrd2); * initialization functions, as well as show_mem() for the skipping * of holes in the memory map. It is populated by arm_add_memory(). */ -struct meminfo meminfo; - void show_mem(unsigned int filter) { int free = 0, total = 0, reserved = 0; - int shared = 0, cached = 0, slab = 0, i; - struct meminfo * mi = &meminfo; + int shared = 0, cached = 0, slab = 0; + struct memblock_region *reg; printk("Mem-info:\n"); show_free_areas(filter); - for_each_bank (i, mi) { - struct membank *bank = &mi->bank[i]; + for_each_memblock (memory, reg) { unsigned int pfn1, pfn2; struct page *page, *end; - pfn1 = bank_pfn_start(bank); - pfn2 = bank_pfn_end(bank); + pfn1 = memblock_region_memory_base_pfn(reg); + pfn2 = memblock_region_memory_end_pfn(reg); page = pfn_to_page(pfn1); end = pfn_to_page(pfn2 - 1) + 1; @@ -115,8 +121,9 @@ void show_mem(unsigned int filter) free++; else shared += page_count(page) - 1; - page++; - } while (page < end); + pfn1++; + page = pfn_to_page(pfn1); + } while (pfn1 < pfn2); } printk("%d pages of RAM\n", total); @@ -130,16 +137,9 @@ void show_mem(unsigned int filter) static void __init find_limits(unsigned long *min, unsigned long *max_low, unsigned long *max_high) { - struct meminfo *mi = &meminfo; - int i; - - /* This assumes the meminfo array is properly sorted */ - *min = bank_pfn_start(&mi->bank[0]); - for_each_bank (i, mi) - if (mi->bank[i].highmem) - break; - *max_low = bank_pfn_end(&mi->bank[i - 1]); - *max_high = bank_pfn_end(&mi->bank[mi->nr_banks - 1]); + *max_low = PFN_DOWN(memblock_get_current_limit()); + *min = PFN_UP(memblock_start_of_DRAM()); + *max_high = PFN_DOWN(memblock_end_of_DRAM()); } #ifdef CONFIG_ZONE_DMA @@ -274,14 +274,8 @@ phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align) return phys; } -void __init arm_memblock_init(struct meminfo *mi, - const struct machine_desc *mdesc) +void __init arm_memblock_init(const struct machine_desc *mdesc) { - int i; - - for (i = 0; i < mi->nr_banks; i++) - memblock_add(mi->bank[i].start, mi->bank[i].size); - /* Register the kernel text, kernel data and initrd with memblock. */ #ifdef CONFIG_XIP_KERNEL memblock_reserve(__pa(_sdata), _end - _sdata); @@ -317,7 +311,6 @@ void __init arm_memblock_init(struct meminfo *mi, #endif arm_mm_memblock_reserve(); - arm_dt_memblock_reserve(); /* reserve any platform specific memblock areas */ if (mdesc->reserve) @@ -413,54 +406,53 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn) /* * The mem_map array can get very big. Free the unused area of the memory map. */ -static void __init free_unused_memmap(struct meminfo *mi) +static void __init free_unused_memmap(void) { - unsigned long bank_start, prev_bank_end = 0; - unsigned int i; + unsigned long start, prev_end = 0; + struct memblock_region *reg; /* * This relies on each bank being in address order. * The banks are sorted previously in bootmem_init(). */ - for_each_bank(i, mi) { - struct membank *bank = &mi->bank[i]; - - bank_start = bank_pfn_start(bank); + for_each_memblock(memory, reg) { + start = memblock_region_memory_base_pfn(reg); #ifdef CONFIG_SPARSEMEM /* * Take care not to free memmap entries that don't exist * due to SPARSEMEM sections which aren't present. */ - bank_start = min(bank_start, - ALIGN(prev_bank_end, PAGES_PER_SECTION)); + start = min(start, + ALIGN(prev_end, PAGES_PER_SECTION)); #else /* * Align down here since the VM subsystem insists that the * memmap entries are valid from the bank start aligned to * MAX_ORDER_NR_PAGES. */ - bank_start = round_down(bank_start, MAX_ORDER_NR_PAGES); + start = round_down(start, MAX_ORDER_NR_PAGES); #endif /* * If we had a previous bank, and there is a space * between the current bank and the previous, free it. */ - if (prev_bank_end && prev_bank_end < bank_start) - free_memmap(prev_bank_end, bank_start); + if (prev_end && prev_end < start) + free_memmap(prev_end, start); /* * Align up here since the VM subsystem insists that the * memmap entries are valid from the bank end aligned to * MAX_ORDER_NR_PAGES. */ - prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES); + prev_end = ALIGN(memblock_region_memory_end_pfn(reg), + MAX_ORDER_NR_PAGES); } #ifdef CONFIG_SPARSEMEM - if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION)) - free_memmap(prev_bank_end, - ALIGN(prev_bank_end, PAGES_PER_SECTION)); + if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION)) + free_memmap(prev_end, + ALIGN(prev_end, PAGES_PER_SECTION)); #endif } @@ -536,7 +528,7 @@ void __init mem_init(void) set_max_mapnr(pfn_to_page(max_pfn) - mem_map); /* this will put all unused low memory onto the freelists */ - free_unused_memmap(&meminfo); + free_unused_memmap(); free_all_bootmem(); #ifdef CONFIG_SA1111 diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index f9c32ba73544..d1e5ad7ab3bc 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -438,6 +438,13 @@ void __arm_iounmap(volatile void __iomem *io_addr) EXPORT_SYMBOL(__arm_iounmap); #ifdef CONFIG_PCI +static int pci_ioremap_mem_type = MT_DEVICE; + +void pci_ioremap_set_mem_type(int mem_type) +{ + pci_ioremap_mem_type = mem_type; +} + int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr) { BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT); @@ -445,7 +452,7 @@ int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr) return ioremap_page_range(PCI_IO_VIRT_BASE + offset, PCI_IO_VIRT_BASE + offset + SZ_64K, phys_addr, - __pgprot(get_mem_type(MT_DEVICE)->prot_pte)); + __pgprot(get_mem_type(pci_ioremap_mem_type)->prot_pte)); } EXPORT_SYMBOL_GPL(pci_ioremap_io); #endif diff --git a/arch/arm/mm/l2c-common.c b/arch/arm/mm/l2c-common.c new file mode 100644 index 000000000000..10a3cf28c362 --- /dev/null +++ b/arch/arm/mm/l2c-common.c @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2010 ARM Ltd. + * Written by Catalin Marinas <catalin.marinas@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/bug.h> +#include <linux/smp.h> +#include <asm/outercache.h> + +void outer_disable(void) +{ + WARN_ON(!irqs_disabled()); + WARN_ON(num_online_cpus() > 1); + + if (outer_cache.disable) + outer_cache.disable(); +} diff --git a/arch/arm/mm/l2c-l2x0-resume.S b/arch/arm/mm/l2c-l2x0-resume.S new file mode 100644 index 000000000000..99b05f21a59a --- /dev/null +++ b/arch/arm/mm/l2c-l2x0-resume.S @@ -0,0 +1,58 @@ +/* + * L2C-310 early resume code. This can be used by platforms to restore + * the settings of their L2 cache controller before restoring the + * processor state. + * + * This code can only be used to if you are running in the secure world. + */ +#include <linux/linkage.h> +#include <asm/hardware/cache-l2x0.h> + + .text + +ENTRY(l2c310_early_resume) + adr r0, 1f + ldr r2, [r0] + add r0, r2, r0 + + ldmia r0, {r1, r2, r3, r4, r5, r6, r7, r8} + @ r1 = phys address of L2C-310 controller + @ r2 = aux_ctrl + @ r3 = tag_latency + @ r4 = data_latency + @ r5 = filter_start + @ r6 = filter_end + @ r7 = prefetch_ctrl + @ r8 = pwr_ctrl + + @ Check that the address has been initialised + teq r1, #0 + moveq pc, lr + + @ The prefetch and power control registers are revision dependent + @ and can be written whether or not the L2 cache is enabled + ldr r0, [r1, #L2X0_CACHE_ID] + and r0, r0, #L2X0_CACHE_ID_RTL_MASK + cmp r0, #L310_CACHE_ID_RTL_R2P0 + strcs r7, [r1, #L310_PREFETCH_CTRL] + cmp r0, #L310_CACHE_ID_RTL_R3P0 + strcs r8, [r1, #L310_POWER_CTRL] + + @ Don't setup the L2 cache if it is already enabled + ldr r0, [r1, #L2X0_CTRL] + tst r0, #L2X0_CTRL_EN + movne pc, lr + + str r3, [r1, #L310_TAG_LATENCY_CTRL] + str r4, [r1, #L310_DATA_LATENCY_CTRL] + str r6, [r1, #L310_ADDR_FILTER_END] + str r5, [r1, #L310_ADDR_FILTER_START] + + str r2, [r1, #L2X0_AUX_CTRL] + mov r9, #L2X0_CTRL_EN + str r9, [r1, #L2X0_CTRL] + mov pc, lr +ENDPROC(l2c310_early_resume) + + .align +1: .long l2x0_saved_regs - . diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 7ea641b7aa7d..ce727d47275c 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -2,6 +2,8 @@ #include <linux/list.h> #include <linux/vmalloc.h> +#include <asm/pgtable.h> + /* the upper-most page table pointer */ extern pmd_t *top_pmd; @@ -93,3 +95,5 @@ extern phys_addr_t arm_lowmem_limit; void __init bootmem_init(void); void arm_mm_memblock_reserve(void); void dma_contiguous_remap(void); + +unsigned long __clear_cr(unsigned long mask); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index b68c6b22e1c8..ab14b79b03f0 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -35,6 +35,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/pci.h> +#include <asm/fixmap.h> #include "mm.h" #include "tcm.h" @@ -117,28 +118,54 @@ static struct cachepolicy cache_policies[] __initdata = { }; #ifdef CONFIG_CPU_CP15 +static unsigned long initial_pmd_value __initdata = 0; + /* - * These are useful for identifying cache coherency - * problems by allowing the cache or the cache and - * writebuffer to be turned off. (Note: the write - * buffer should not be on and the cache off). + * Initialise the cache_policy variable with the initial state specified + * via the "pmd" value. This is used to ensure that on ARMv6 and later, + * the C code sets the page tables up with the same policy as the head + * assembly code, which avoids an illegal state where the TLBs can get + * confused. See comments in early_cachepolicy() for more information. */ -static int __init early_cachepolicy(char *p) +void __init init_default_cache_policy(unsigned long pmd) { int i; + initial_pmd_value = pmd; + + pmd &= PMD_SECT_TEX(1) | PMD_SECT_BUFFERABLE | PMD_SECT_CACHEABLE; + + for (i = 0; i < ARRAY_SIZE(cache_policies); i++) + if (cache_policies[i].pmd == pmd) { + cachepolicy = i; + break; + } + + if (i == ARRAY_SIZE(cache_policies)) + pr_err("ERROR: could not find cache policy\n"); +} + +/* + * These are useful for identifying cache coherency problems by allowing + * the cache or the cache and writebuffer to be turned off. (Note: the + * write buffer should not be on and the cache off). + */ +static int __init early_cachepolicy(char *p) +{ + int i, selected = -1; + for (i = 0; i < ARRAY_SIZE(cache_policies); i++) { int len = strlen(cache_policies[i].policy); if (memcmp(p, cache_policies[i].policy, len) == 0) { - cachepolicy = i; - cr_alignment &= ~cache_policies[i].cr_mask; - cr_no_alignment &= ~cache_policies[i].cr_mask; + selected = i; break; } } - if (i == ARRAY_SIZE(cache_policies)) - printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n"); + + if (selected == -1) + pr_err("ERROR: unknown or unsupported cache policy\n"); + /* * This restriction is partly to do with the way we boot; it is * unpredictable to have memory mapped using two different sets of @@ -146,12 +173,18 @@ static int __init early_cachepolicy(char *p) * change these attributes once the initial assembly has setup the * page tables. */ - if (cpu_architecture() >= CPU_ARCH_ARMv6) { - printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n"); - cachepolicy = CPOLICY_WRITEBACK; + if (cpu_architecture() >= CPU_ARCH_ARMv6 && selected != cachepolicy) { + pr_warn("Only cachepolicy=%s supported on ARMv6 and later\n", + cache_policies[cachepolicy].policy); + return 0; + } + + if (selected != cachepolicy) { + unsigned long cr = __clear_cr(cache_policies[selected].cr_mask); + cachepolicy = selected; + flush_cache_all(); + set_cr(cr); } - flush_cache_all(); - set_cr(cr_alignment); return 0; } early_param("cachepolicy", early_cachepolicy); @@ -186,35 +219,6 @@ static int __init early_ecc(char *p) early_param("ecc", early_ecc); #endif -static int __init noalign_setup(char *__unused) -{ - cr_alignment &= ~CR_A; - cr_no_alignment &= ~CR_A; - set_cr(cr_alignment); - return 1; -} -__setup("noalign", noalign_setup); - -#ifndef CONFIG_SMP -void adjust_cr(unsigned long mask, unsigned long set) -{ - unsigned long flags; - - mask &= ~CR_A; - - set &= mask; - - local_irq_save(flags); - - cr_no_alignment = (cr_no_alignment & ~mask) | set; - cr_alignment = (cr_alignment & ~mask) | set; - - set_cr((get_cr() & ~mask) | set); - - local_irq_restore(flags); -} -#endif - #else /* ifdef CONFIG_CPU_CP15 */ static int __init early_cachepolicy(char *p) @@ -414,8 +418,17 @@ static void __init build_mem_type_table(void) cachepolicy = CPOLICY_WRITEBACK; ecc_mask = 0; } - if (is_smp()) - cachepolicy = CPOLICY_WRITEALLOC; + + if (is_smp()) { + if (cachepolicy != CPOLICY_WRITEALLOC) { + pr_warn("Forcing write-allocate cache policy for SMP\n"); + cachepolicy = CPOLICY_WRITEALLOC; + } + if (!(initial_pmd_value & PMD_SECT_S)) { + pr_warn("Forcing shared mappings for SMP\n"); + initial_pmd_value |= PMD_SECT_S; + } + } /* * Strip out features not present on earlier architectures. @@ -539,11 +552,12 @@ static void __init build_mem_type_table(void) mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; #endif - if (is_smp()) { - /* - * Mark memory with the "shared" attribute - * for SMP systems - */ + /* + * If the initial page tables were created with the S bit + * set, then we need to do the same here for the same + * reasons given in early_cachepolicy(). + */ + if (initial_pmd_value & PMD_SECT_S) { user_pgprot |= L_PTE_SHARED; kern_pgprot |= L_PTE_SHARED; vecs_pgprot |= L_PTE_SHARED; @@ -1061,74 +1075,47 @@ phys_addr_t arm_lowmem_limit __initdata = 0; void __init sanity_check_meminfo(void) { phys_addr_t memblock_limit = 0; - int i, j, highmem = 0; + int highmem = 0; phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1; + struct memblock_region *reg; - for (i = 0, j = 0; i < meminfo.nr_banks; i++) { - struct membank *bank = &meminfo.bank[j]; - phys_addr_t size_limit; - - *bank = meminfo.bank[i]; - size_limit = bank->size; + for_each_memblock(memory, reg) { + phys_addr_t block_start = reg->base; + phys_addr_t block_end = reg->base + reg->size; + phys_addr_t size_limit = reg->size; - if (bank->start >= vmalloc_limit) + if (reg->base >= vmalloc_limit) highmem = 1; else - size_limit = vmalloc_limit - bank->start; + size_limit = vmalloc_limit - reg->base; - bank->highmem = highmem; -#ifdef CONFIG_HIGHMEM - /* - * Split those memory banks which are partially overlapping - * the vmalloc area greatly simplifying things later. - */ - if (!highmem && bank->size > size_limit) { - if (meminfo.nr_banks >= NR_BANKS) { - printk(KERN_CRIT "NR_BANKS too low, " - "ignoring high memory\n"); - } else { - memmove(bank + 1, bank, - (meminfo.nr_banks - i) * sizeof(*bank)); - meminfo.nr_banks++; - i++; - bank[1].size -= size_limit; - bank[1].start = vmalloc_limit; - bank[1].highmem = highmem = 1; - j++; + if (!IS_ENABLED(CONFIG_HIGHMEM) || cache_is_vipt_aliasing()) { + + if (highmem) { + pr_notice("Ignoring RAM at %pa-%pa (!CONFIG_HIGHMEM)\n", + &block_start, &block_end); + memblock_remove(reg->base, reg->size); + continue; } - bank->size = size_limit; - } -#else - /* - * Highmem banks not allowed with !CONFIG_HIGHMEM. - */ - if (highmem) { - printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx " - "(!CONFIG_HIGHMEM).\n", - (unsigned long long)bank->start, - (unsigned long long)bank->start + bank->size - 1); - continue; - } - /* - * Check whether this memory bank would partially overlap - * the vmalloc area. - */ - if (bank->size > size_limit) { - printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx " - "to -%.8llx (vmalloc region overlap).\n", - (unsigned long long)bank->start, - (unsigned long long)bank->start + bank->size - 1, - (unsigned long long)bank->start + size_limit - 1); - bank->size = size_limit; + if (reg->size > size_limit) { + phys_addr_t overlap_size = reg->size - size_limit; + + pr_notice("Truncating RAM at %pa-%pa to -%pa", + &block_start, &block_end, &vmalloc_limit); + memblock_remove(vmalloc_limit, overlap_size); + block_end = vmalloc_limit; + } } -#endif - if (!bank->highmem) { - phys_addr_t bank_end = bank->start + bank->size; - if (bank_end > arm_lowmem_limit) - arm_lowmem_limit = bank_end; + if (!highmem) { + if (block_end > arm_lowmem_limit) { + if (reg->size > size_limit) + arm_lowmem_limit = vmalloc_limit; + else + arm_lowmem_limit = block_end; + } /* * Find the first non-section-aligned page, and point @@ -1144,35 +1131,15 @@ void __init sanity_check_meminfo(void) * occurs before any free memory is mapped. */ if (!memblock_limit) { - if (!IS_ALIGNED(bank->start, SECTION_SIZE)) - memblock_limit = bank->start; - else if (!IS_ALIGNED(bank_end, SECTION_SIZE)) - memblock_limit = bank_end; + if (!IS_ALIGNED(block_start, SECTION_SIZE)) + memblock_limit = block_start; + else if (!IS_ALIGNED(block_end, SECTION_SIZE)) + memblock_limit = arm_lowmem_limit; } - } - j++; - } -#ifdef CONFIG_HIGHMEM - if (highmem) { - const char *reason = NULL; - if (cache_is_vipt_aliasing()) { - /* - * Interactions between kmap and other mappings - * make highmem support with aliasing VIPT caches - * rather difficult. - */ - reason = "with VIPT aliasing cache"; - } - if (reason) { - printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n", - reason); - while (j > 0 && meminfo.bank[j - 1].highmem) - j--; } } -#endif - meminfo.nr_banks = j; + high_memory = __va(arm_lowmem_limit - 1) + 1; /* @@ -1359,6 +1326,9 @@ static void __init kmap_init(void) #ifdef CONFIG_HIGHMEM pkmap_page_table = early_pte_alloc(pmd_off_k(PKMAP_BASE), PKMAP_BASE, _PAGE_KERNEL_TABLE); + + fixmap_page_table = early_pte_alloc(pmd_off_k(FIXADDR_START), + FIXADDR_START, _PAGE_KERNEL_TABLE); #endif } @@ -1461,7 +1431,7 @@ void __init early_paging_init(const struct machine_desc *mdesc, * just complicate the code. */ flush_cache_louis(); - dsb(); + dsb(ishst); isb(); /* remap level 1 table */ diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 55764a7ef1f0..da1874f9f8cf 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -88,30 +88,35 @@ static unsigned long irbar_read(void) void __init sanity_check_meminfo_mpu(void) { int i; - struct membank *bank = meminfo.bank; phys_addr_t phys_offset = PHYS_OFFSET; phys_addr_t aligned_region_size, specified_mem_size, rounded_mem_size; - - /* Initially only use memory continuous from PHYS_OFFSET */ - if (bank_phys_start(&bank[0]) != phys_offset) - panic("First memory bank must be contiguous from PHYS_OFFSET"); - - /* Banks have already been sorted by start address */ - for (i = 1; i < meminfo.nr_banks; i++) { - if (bank[i].start <= bank_phys_end(&bank[0]) && - bank_phys_end(&bank[i]) > bank_phys_end(&bank[0])) { - bank[0].size = bank_phys_end(&bank[i]) - bank[0].start; + struct memblock_region *reg; + bool first = true; + phys_addr_t mem_start; + phys_addr_t mem_end; + + for_each_memblock(memory, reg) { + if (first) { + /* + * Initially only use memory continuous from + * PHYS_OFFSET */ + if (reg->base != phys_offset) + panic("First memory bank must be contiguous from PHYS_OFFSET"); + + mem_start = reg->base; + mem_end = reg->base + reg->size; + specified_mem_size = reg->size; + first = false; } else { - pr_notice("Ignoring RAM after 0x%.8lx. " - "First non-contiguous (ignored) bank start: 0x%.8lx\n", - (unsigned long)bank_phys_end(&bank[0]), - (unsigned long)bank_phys_start(&bank[i])); - break; + /* + * memblock auto merges contiguous blocks, remove + * all blocks afterwards + */ + pr_notice("Ignoring RAM after %pa, memory at %pa ignored\n", + &mem_start, ®->base); + memblock_remove(reg->base, reg->size); } } - /* All contiguous banks are now merged in to the first bank */ - meminfo.nr_banks = 1; - specified_mem_size = bank[0].size; /* * MPU has curious alignment requirements: Size must be power of 2, and @@ -128,23 +133,24 @@ void __init sanity_check_meminfo_mpu(void) */ aligned_region_size = (phys_offset - 1) ^ (phys_offset); /* Find the max power-of-two sized region that fits inside our bank */ - rounded_mem_size = (1 << __fls(bank[0].size)) - 1; + rounded_mem_size = (1 << __fls(specified_mem_size)) - 1; /* The actual region size is the smaller of the two */ aligned_region_size = aligned_region_size < rounded_mem_size ? aligned_region_size + 1 : rounded_mem_size + 1; - if (aligned_region_size != specified_mem_size) - pr_warn("Truncating memory from 0x%.8lx to 0x%.8lx (MPU region constraints)", - (unsigned long)specified_mem_size, - (unsigned long)aligned_region_size); + if (aligned_region_size != specified_mem_size) { + pr_warn("Truncating memory from %pa to %pa (MPU region constraints)", + &specified_mem_size, &aligned_region_size); + memblock_remove(mem_start + aligned_region_size, + specified_mem_size - aligned_round_size); + + mem_end = mem_start + aligned_region_size; + } - meminfo.bank[0].size = aligned_region_size; - pr_debug("MPU Region from 0x%.8lx size 0x%.8lx (end 0x%.8lx))\n", - (unsigned long)phys_offset, - (unsigned long)aligned_region_size, - (unsigned long)bank_phys_end(&bank[0])); + pr_debug("MPU Region from %pa size %pa (end %pa))\n", + &phys_offset, &aligned_region_size, &mem_end); } @@ -292,7 +298,7 @@ void __init sanity_check_meminfo(void) { phys_addr_t end; sanity_check_meminfo_mpu(); - end = bank_phys_end(&meminfo.bank[meminfo.nr_banks - 1]); + end = memblock_end_of_DRAM(); high_memory = __va(end - 1) + 1; } diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 01a719e18bb0..22e3ad63500c 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -64,6 +64,14 @@ ENTRY(cpu_v7_switch_mm) mov pc, lr ENDPROC(cpu_v7_switch_mm) +#ifdef __ARMEB__ +#define rl r3 +#define rh r2 +#else +#define rl r2 +#define rh r3 +#endif + /* * cpu_v7_set_pte_ext(ptep, pte) * @@ -73,13 +81,13 @@ ENDPROC(cpu_v7_switch_mm) */ ENTRY(cpu_v7_set_pte_ext) #ifdef CONFIG_MMU - tst r2, #L_PTE_VALID + tst rl, #L_PTE_VALID beq 1f - tst r3, #1 << (57 - 32) @ L_PTE_NONE - bicne r2, #L_PTE_VALID + tst rh, #1 << (57 - 32) @ L_PTE_NONE + bicne rl, #L_PTE_VALID bne 1f - tst r3, #1 << (55 - 32) @ L_PTE_DIRTY - orreq r2, #L_PTE_RDONLY + tst rh, #1 << (55 - 32) @ L_PTE_DIRTY + orreq rl, #L_PTE_RDONLY 1: strd r2, r3, [r0] ALT_SMP(W(nop)) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 195731d3813b..3db2c2f04a30 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -169,9 +169,31 @@ ENDPROC(cpu_pj4b_do_idle) globl_equ cpu_pj4b_do_idle, cpu_v7_do_idle #endif globl_equ cpu_pj4b_dcache_clean_area, cpu_v7_dcache_clean_area - globl_equ cpu_pj4b_do_suspend, cpu_v7_do_suspend - globl_equ cpu_pj4b_do_resume, cpu_v7_do_resume - globl_equ cpu_pj4b_suspend_size, cpu_v7_suspend_size +#ifdef CONFIG_ARM_CPU_SUSPEND +ENTRY(cpu_pj4b_do_suspend) + stmfd sp!, {r6 - r10} + mrc p15, 1, r6, c15, c1, 0 @ save CP15 - extra features + mrc p15, 1, r7, c15, c2, 0 @ save CP15 - Aux Func Modes Ctrl 0 + mrc p15, 1, r8, c15, c1, 2 @ save CP15 - Aux Debug Modes Ctrl 2 + mrc p15, 1, r9, c15, c1, 1 @ save CP15 - Aux Debug Modes Ctrl 1 + mrc p15, 0, r10, c9, c14, 0 @ save CP15 - PMC + stmia r0!, {r6 - r10} + ldmfd sp!, {r6 - r10} + b cpu_v7_do_suspend +ENDPROC(cpu_pj4b_do_suspend) + +ENTRY(cpu_pj4b_do_resume) + ldmia r0!, {r6 - r10} + mcr p15, 1, r6, c15, c1, 0 @ save CP15 - extra features + mcr p15, 1, r7, c15, c2, 0 @ save CP15 - Aux Func Modes Ctrl 0 + mcr p15, 1, r8, c15, c1, 2 @ save CP15 - Aux Debug Modes Ctrl 2 + mcr p15, 1, r9, c15, c1, 1 @ save CP15 - Aux Debug Modes Ctrl 1 + mcr p15, 0, r10, c9, c14, 0 @ save CP15 - PMC + b cpu_v7_do_resume +ENDPROC(cpu_pj4b_do_resume) +#endif +.globl cpu_pj4b_suspend_size +.equ cpu_pj4b_suspend_size, 4 * 14 #endif @@ -194,6 +216,7 @@ __v7_cr7mp_setup: __v7_ca7mp_setup: __v7_ca12mp_setup: __v7_ca15mp_setup: +__v7_ca17mp_setup: mov r10, #0 1: #ifdef CONFIG_SMP @@ -505,6 +528,16 @@ __v7_ca15mp_proc_info: .size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info /* + * ARM Ltd. Cortex A17 processor. + */ + .type __v7_ca17mp_proc_info, #object +__v7_ca17mp_proc_info: + .long 0x410fc0e0 + .long 0xff0ffff0 + __v7_proc __v7_ca17mp_setup + .size __v7_ca17mp_proc_info, . - __v7_ca17mp_proc_info + + /* * Qualcomm Inc. Krait processors. */ .type __krait_proc_info, #object diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c index be4ad0b21c08..2157c5b539e6 100644 --- a/arch/arm/plat-samsung/dev-backlight.c +++ b/arch/arm/plat-samsung/dev-backlight.c @@ -124,8 +124,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns; if (bl_data->enable_gpio >= 0) samsung_bl_data->enable_gpio = bl_data->enable_gpio; - if (bl_data->enable_gpio_flags) - samsung_bl_data->enable_gpio_flags = bl_data->enable_gpio_flags; if (bl_data->init) samsung_bl_data->init = bl_data->init; if (bl_data->notify) diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c index 98087b655df0..469b86260fe3 100644 --- a/arch/arm/plat-samsung/s5p-dev-mfc.c +++ b/arch/arm/plat-samsung/s5p-dev-mfc.c @@ -125,8 +125,8 @@ device_initcall(s5p_mfc_memory_init); int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname, int depth, void *data) { - __be32 *prop; - unsigned long len; + const __be32 *prop; + int len; struct s5p_mfc_dt_meminfo mfc_mem; if (!data) diff --git a/arch/arm/plat-samsung/s5p-sleep.S b/arch/arm/plat-samsung/s5p-sleep.S index c5001659bdf8..25c68ceb9e2b 100644 --- a/arch/arm/plat-samsung/s5p-sleep.S +++ b/arch/arm/plat-samsung/s5p-sleep.S @@ -22,7 +22,6 @@ */ #include <linux/linkage.h> -#include <asm/asm-offsets.h> .data .align diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index f0759e70fb86..fe6ca574d093 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -22,11 +22,10 @@ @ r9 = normal "successful" return address @ r10 = this threads thread_info structure @ lr = unrecognised instruction return address -@ IRQs disabled. +@ IRQs enabled. @ ENTRY(do_vfp) inc_preempt_count r10, r4 - enable_irq ldr r4, .LCvfp ldr r11, [r10, #TI_CPU] @ CPU number add r10, r10, #TI_VFPSTATE @ r10 = workspace |
