diff options
Diffstat (limited to 'arch/arm')
243 files changed, 10166 insertions, 3830 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c49a775937db..32cbbd565902 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1983,8 +1983,6 @@ config XIP_PHYS_ADDR config KEXEC bool "Kexec system call (EXPERIMENTAL)" depends on (!SMP || PM_SLEEP_SMP) - select CRYPTO - select CRYPTO_SHA256 help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b8c5cd3ddeb9..a13ea1cced60 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -159,8 +159,11 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ kirkwood-ts419-6282.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb +dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb dtb-$(CONFIG_ARCH_MXC) += \ + imx1-ads.dtb \ + imx1-apf9328.dtb \ imx25-eukrea-mbimxsd25-baseboard.dtb \ imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \ imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \ @@ -199,6 +202,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-gw52xx.dtb \ imx6dl-gw53xx.dtb \ imx6dl-gw54xx.dtb \ + imx6dl-gw552x.dtb \ imx6dl-hummingboard.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ @@ -223,6 +227,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-gw53xx.dtb \ imx6q-gw5400-a.dtb \ imx6q-gw54xx.dtb \ + imx6q-gw552x.dtb \ + imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-rex-pro.dtb \ @@ -240,7 +246,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-tx6q-1110.dtb \ imx6sl-evk.dtb \ imx6sx-sdb.dtb \ - vf610-colibri.dtb \ + vf610-colibri-eval-v3.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ @@ -286,7 +292,11 @@ dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ omap3-devkit8000.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ - omap3-gta04.dtb \ + omap3-gta04a3.dtb \ + omap3-gta04a4.dtb \ + omap3-gta04a5.dtb \ + omap3-ha.dtb \ + omap3-ha-lcd.dtb \ omap3-igep0020.dtb \ omap3-igep0030.dtb \ omap3-ldp.dtb \ @@ -309,6 +319,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ omap3-sbc-t3517.dtb \ omap3-sbc-t3530.dtb \ omap3-sbc-t3730.dtb \ + omap3-thunder.dtb \ omap3-zoom3.dtb dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ am335x-bone.dtb \ @@ -341,7 +352,9 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-ifc6410.dtb \ qcom-apq8074-dragonboard.dtb \ + qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ + qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ @@ -375,7 +388,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ r8a7790-lager.dtb \ - r8a7779-marzen.dtb + r8a7779-marzen.dtb \ + r8a7794-alt.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ @@ -406,6 +420,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ + sun5i-a13-hsg-h702.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb dtb-$(CONFIG_MACH_SUN6I) += \ @@ -416,7 +431,9 @@ dtb-$(CONFIG_MACH_SUN6I) += \ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ + sun7i-a20-hummingbird.dtb \ sun7i-a20-i12-tvbox.dtb \ + sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-pcduino3.dtb dtb-$(CONFIG_MACH_SUN8I) += \ @@ -440,6 +457,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra114-roth.dtb \ tegra114-tn7.dtb \ tegra124-jetson-tk1.dtb \ + tegra124-nyan-big.dtb \ tegra124-venice2.dtb dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ @@ -491,6 +509,7 @@ dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ dove-d2plug.dtb \ dove-d3plug.dtb \ dove-dove-db.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb targets += dtbs dtbs_install targets += $(dtb-y) diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index bde1777b62be..fe983d204b2b 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -227,6 +227,7 @@ &tps { regulators { dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; regulator-always-on; }; @@ -249,18 +250,22 @@ }; ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; regulator-always-on; }; ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; regulator-always-on; }; ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 3a0a161342ba..e4f165a7833a 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -354,6 +354,10 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; }; timer1: timer@44e31000 { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 9b3d2ba82f13..2f7570e3d483 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -58,10 +58,12 @@ }; am43xx_pinmux: pinmux@44e10800 { - compatible = "pinctrl-single"; + compatible = "ti,am437-padconf", "pinctrl-single"; reg = <0x44e10800 0x31c>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; }; @@ -168,6 +170,10 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; }; timer1: timer@44e31000 { diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 416f4e5a69c1..a495e5821ab8 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -43,6 +43,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { reg = <0>; }; @@ -53,11 +55,15 @@ }; ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 097df7d8f0f6..2b6d24e0d1e8 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -91,6 +91,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { reg = <0>; }; @@ -100,11 +102,15 @@ }; }; ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index d6d572e5af32..29a7c4e926cc 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -101,12 +101,16 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { /* Marvell 88E1318 */ reg = <0>; }; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; @@ -122,7 +126,7 @@ status = "okay"; isl12057: isl12057@68 { - compatible = "isl,isl12057"; + compatible = "isil,isl12057"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index c5fe8b5dcdc7..c8b23c0e08d2 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -86,6 +86,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { /* Marvell 88E1318 */ reg = <0>; }; @@ -96,12 +98,16 @@ }; ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; @@ -117,7 +123,7 @@ status = "okay"; isl12057: isl12057@68 { - compatible = "isl,isl12057"; + compatible = "isil,isl12057"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 4169f4096ea3..14c66e4adbc0 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -50,6 +50,18 @@ }; internal-regs { + pinctrl { + fan_pins: fan-pins { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + + led_pins: led-pins { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + }; + serial@12000 { status = "okay"; }; @@ -59,6 +71,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { reg = <0>; }; @@ -74,6 +88,8 @@ phy-mode = "sgmii"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; @@ -106,6 +122,26 @@ }; }; + gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 3000 1>; + pinctrl-0 = <&fan_pins>; + pinctrl-names = "default"; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + sw_led { + label = "370rd:green:sw"; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; + nand@d0000 { status = "okay"; num-cs = <1>; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 23227e0027ec..83286ec9702c 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -110,7 +110,7 @@ }; spi0: spi@10600 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-370-spi", "marvell,orion-spi"; reg = <0x10600 0x28>; #address-cells = <1>; #size-cells = <0>; @@ -121,7 +121,7 @@ }; spi1: spi@10680 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-370-spi", "marvell,orion-spi"; reg = <0x10680 0x28>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 21b588b6f6bd..6b3c23b1e138 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -151,6 +151,25 @@ "mpp62", "mpp60", "mpp58"; marvell,function = "audio"; }; + + mdio_pins: mdio-pins { + marvell,pins = "mpp17", "mpp18"; + marvell,function = "ge"; + }; + + ge0_rgmii_pins: ge0-rgmii-pins { + marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11", "mpp12", + "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "ge0"; + }; + + ge1_rgmii_pins: ge1-rgmii-pins { + marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27", "mpp28", "mpp29", "mpp30"; + marvell,function = "ge1"; + }; }; gpio0: gpio@18100 { @@ -206,6 +225,10 @@ status = "okay"; }; + sscg@18330 { + reg = <0x18330 0x4>; + }; + interrupt-controller@20000 { reg = <0x20a00 0x1d0>, <0x21870 0x58>; }; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index c1e49e7bf0fa..de6571445cef 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -185,6 +185,12 @@ }; }; + rtc@10300 { + compatible = "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + }; + spi0: spi@10600 { compatible = "marvell,orion-spi"; reg = <0x10600 0x50>; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 0cf999abc4ed..252def861cbe 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -174,7 +174,7 @@ status = "okay"; isl12057: isl12057@68 { - compatible = "isl,isl12057"; + compatible = "isil,isl12057"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index bb23c2d33cf8..840958ba556c 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -345,10 +345,14 @@ }; }; - ramc: ramc@ffffe200 { + ramc0: ramc@ffffe200 { compatible = "atmel,at91sam9260-sdramc"; - reg = <0xffffe200 0x200 - 0xffffe800 0x200>; + reg = <0xffffe200 0x200>; + }; + + ramc1: ramc@ffffe800 { + compatible = "atmel,at91sam9260-sdramc"; + reg = <0xffffe800 0x200>; }; pit: timer@fffffd30 { diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 31f7652612fc..5734dc18d7e1 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -22,6 +22,10 @@ compatible = "atmel,at91sam9g20-i2c"; }; + ssc0: ssc@fffbc000 { + compatible = "atmel,at91sam9rl-ssc"; + }; + adc0: adc@fffe0000 { atmel,adc-startup-time = <40>; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 932a669156af..d3f65130a1f8 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -96,8 +96,14 @@ ramc0: ramc@ffffe400 { compatible = "atmel,at91sam9g45-ddramc"; - reg = <0xffffe400 0x200 - 0xffffe600 0x200>; + reg = <0xffffe400 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; + }; + + ramc1: ramc@ffffe600 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe600 0x200>; clocks = <&ddrck>; clock-names = "ddrck"; }; @@ -159,7 +165,7 @@ compatible = "atmel,at91rm9200-clk-master"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; atmel,clk-output-range = <0 133333333>; atmel,clk-divisors = <1 2 4 3>; }; @@ -175,7 +181,7 @@ #address-cells = <1>; #size-cells = <0>; interrupt-parent = <&pmc>; - clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>, <&mck>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; prog0: prog0 { #clock-cells = <0>; @@ -1159,6 +1165,39 @@ atmel,can-isoc; }; }; + + sckc@fffffd50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffd50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <1200000>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <75>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; + + rtc@fffffdb0 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffdb0 0x30>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + status = "disabled"; + }; }; fb0: fb@0x00500000 { diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 96ccc7de4f0a..d8dd22651090 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -160,6 +160,10 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm_leds>; }; + + rtc@fffffdb0 { + status = "okay"; + }; }; fb0: fb@0x00500000 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 2bfac310dbec..68eb9aded164 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -87,6 +87,8 @@ ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; }; pmc: pmc@fffffc00 { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 83d723711ae1..13bb24ea971a 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -136,6 +136,8 @@ }; usb0: ohci@00500000 { + num-ports = <1>; + atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index ab56c8b81dfa..f0b4352650ed 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -204,7 +204,7 @@ }; ssc0: ssc@fffc0000 { - compatible = "atmel,at91rm9200-ssc"; + compatible = "atmel,at91sam9rl-ssc"; reg = <0xfffc0000 0x4000>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; @@ -213,7 +213,7 @@ }; ssc1: ssc@fffc4000 { - compatible = "atmel,at91rm9200-ssc"; + compatible = "atmel,at91sam9rl-ssc"; reg = <0xfffc4000 0x4000>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index e1a5c70b885c..726274f7959b 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -95,6 +95,8 @@ ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; }; pmc: pmc@fffffc00 { @@ -966,7 +968,7 @@ adc0: adc@f804c000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9260-adc"; + compatible = "atmel,at91sam9x5-adc"; reg = <0xf804c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&adc_clk>, diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 1e11e5a5f723..4f935ad9f27b 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -17,6 +17,18 @@ soc { pmx_core: pinmux@1c14120 { status = "okay"; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,bits = < + /* + * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR, + * AFSR, AMUTE + */ + 0x00 0x11111111 0xffffffff + /* AXR11, AXR12 */ + 0x04 0x00011000 0x000ff000 + >; + }; }; serial0: serial@1c42000 { status = "okay"; @@ -39,6 +51,20 @@ tps: tps@48 { reg = <0x48>; }; + tlv320aic3106: tlv320aic3106@18 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x18>; + status = "okay"; + + /* Regulators */ + IOVDD-supply = <&vdcdc2_reg>; + /* Derived from VBAT: Baseboard 3.3V / 1.8V */ + AVDD-supply = <&vbat>; + DRVDD-supply = <&vbat>; + DVDD-supply = <&vbat>; + }; + }; wdt: wdt@1c21000 { status = "okay"; @@ -117,6 +143,33 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "DA850/OMAP-L138 EVM"; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out"; + simple-audio-card,routing = + "LINE1L", "Line In", + "LINE1R", "Line In", + "Line Out", "LLOUT", + "Line Out", "RLOUT"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + system-clock-frequency = <24576000>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + system-clock-frequency = <24576000>; + }; + }; }; /include/ "tps6507x.dtsi" @@ -170,3 +223,22 @@ }; }; }; + +&mcasp0 { + #sound-dai-cells = <0>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 0 0 + 0 0 0 0 + 0 0 0 1 + 2 0 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index b695548dbb4e..0bd98cd00816 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -150,6 +150,12 @@ }; }; + edma0: edma@01c00000 { + compatible = "ti,edma3"; + reg = <0x0 0x10000>; + interrupts = <11 13 12>; + #dma-cells = <1>; + }; serial0: serial@1c42000 { compatible = "ns16550a"; reg = <0x42000 0x100>; @@ -270,6 +276,19 @@ ti,davinci-gpio-unbanked = <0>; status = "disabled"; }; + + mcasp0: mcasp@01d00000 { + compatible = "ti,da830-mcasp-audio"; + reg = <0x100000 0x2000>, + <0x102000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <54>; + interrupt-names = "common"; + status = "disabled"; + dmas = <&edma0 1>, + <&edma0 0>; + dma-names = "tx", "rx"; + }; }; nand_cs3@62000000 { compatible = "ti,davinci-nand"; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 50f8022905a1..08434c7b9759 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -303,6 +303,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; + interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <&dra7_pmx_core 0x3e0>; }; &uart2 { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 97f603c4483d..1fd6b931490f 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -217,10 +217,12 @@ }; dra7_pmx_core: pinmux@4a003400 { - compatible = "pinctrl-single"; + compatible = "ti,dra7-padconf", "pinctrl-single"; reg = <0x4a003400 0x0464>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x3fffffff>; }; @@ -245,7 +247,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@48055000 { @@ -256,7 +258,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@48057000 { @@ -267,7 +269,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@48059000 { @@ -278,7 +280,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@4805b000 { @@ -289,7 +291,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@4805d000 { @@ -300,7 +302,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@48051000 { @@ -311,7 +313,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio8: gpio@48053000 { @@ -322,13 +324,13 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; @@ -337,7 +339,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; @@ -346,7 +348,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; @@ -355,7 +357,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; @@ -364,7 +366,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; @@ -373,7 +375,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; @@ -382,7 +384,7 @@ uart7: serial@48420000 { compatible = "ti,omap4-uart"; reg = <0x48420000 0x100>; - interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart7"; clock-frequency = <48000000>; status = "disabled"; @@ -391,7 +393,7 @@ uart8: serial@48422000 { compatible = "ti,omap4-uart"; reg = <0x48422000 0x100>; - interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart8"; clock-frequency = <48000000>; status = "disabled"; @@ -400,7 +402,7 @@ uart9: serial@48424000 { compatible = "ti,omap4-uart"; reg = <0x48424000 0x100>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart9"; clock-frequency = <48000000>; status = "disabled"; @@ -409,7 +411,7 @@ uart10: serial@4ae2b000 { compatible = "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; - interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart10"; clock-frequency = <48000000>; status = "disabled"; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 514702348818..41074288adfa 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -19,6 +19,126 @@ }; }; +&dra7_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + tps65917: tps65917@58 { + compatible = "ti,tps65917"; + reg = <0x58>; + + interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + + ti,system-power-controller; + + tps65917_pmic { + compatible = "ti,tps65917-pmic"; + + regulators { + smps1_reg: smps1 { + /* VDD_MPU */ + regulator-name = "smps1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps2_reg: smps2 { + /* VDD_CORE */ + regulator-name = "smps2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + + smps3_reg: smps3 { + /* VDD_GPU IVA DSPEVE */ + regulator-name = "smps3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + smps4_reg: smps4 { + /* VDDS1V8 */ + regulator-name = "smps4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps5_reg: smps5 { + /* VDD_DDR */ + regulator-name = "smps5"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> SDIO */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + /* LDO2_OUT --> TP1017 (UNUSED) */ + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PLL */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldo4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + }; +}; + &uart1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 6d6d23c83d30..adadaf97ac01 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -134,6 +134,8 @@ i2c@13860000 { pinctrl-0 = <&i2c0_bus>; pinctrl-names = "default"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; status = "okay"; usb3503: usb3503@08 { @@ -148,6 +150,10 @@ max77686: pmic@09 { compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; reg = <0x09>; #clock-cells = <1>; @@ -368,4 +374,11 @@ samsung,pins = "gpx1-3"; samsung,pin-pud = <0>; }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts new file mode 100644 index 000000000000..af4eee5794aa --- /dev/null +++ b/arch/arm/boot/dts/imx1-ads.dts @@ -0,0 +1,152 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx1.dtsi" + +/ { + model = "Freescale MX1 ADS"; + compatible = "fsl,imx1ads", "fsl,imx1"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x08000000 0x04000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + clk32 { + compatible = "fsl,imx-clk32", "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; +}; + +&cspi1 { + pinctrl-0 = <&pinctrl_cspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c>; + status = "okay"; + + extgpio0: pcf8575@22 { + compatible = "nxp,pcf8575"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + extgpio1: pcf8575@24 { + compatible = "nxp,pcf8575"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim>; + status = "okay"; + + nor: nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x02000000>; + bank-width = <4>; + fsl,weim-cs-timing = <0x00003e00 0x00000801>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&iomuxc { + imx1-ads { + pinctrl_cspi1: cspi1grp { + fsl,pins = < + MX1_PAD_SPI1_MISO__SPI1_MISO 0x0 + MX1_PAD_SPI1_MOSI__SPI1_MOSI 0x0 + MX1_PAD_SPI1_RDY__SPI1_RDY 0x0 + MX1_PAD_SPI1_SCLK__SPI1_SCLK 0x0 + MX1_PAD_SPI1_SS__GPIO3_15 0x0 + >; + }; + + pinctrl_i2c: i2cgrp { + fsl,pins = < + MX1_PAD_I2C_SCL__I2C_SCL 0x0 + MX1_PAD_I2C_SDA__I2C_SDA 0x0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX1_PAD_UART1_TXD__UART1_TXD 0x0 + MX1_PAD_UART1_RXD__UART1_RXD 0x0 + MX1_PAD_UART1_CTS__UART1_CTS 0x0 + MX1_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX1_PAD_UART2_TXD__UART2_TXD 0x0 + MX1_PAD_UART2_RXD__UART2_RXD 0x0 + MX1_PAD_UART2_CTS__UART2_CTS 0x0 + MX1_PAD_UART2_RTS__UART2_RTS 0x0 + >; + }; + + pinctrl_weim: weimgrp { + fsl,pins = < + MX1_PAD_A0__A0 0x0 + MX1_PAD_A16__A16 0x0 + MX1_PAD_A17__A17 0x0 + MX1_PAD_A18__A18 0x0 + MX1_PAD_A19__A19 0x0 + MX1_PAD_A20__A20 0x0 + MX1_PAD_A21__A21 0x0 + MX1_PAD_A22__A22 0x0 + MX1_PAD_A23__A23 0x0 + MX1_PAD_A24__A24 0x0 + MX1_PAD_BCLK__BCLK 0x0 + MX1_PAD_CS4__CS4 0x0 + MX1_PAD_DTACK__DTACK 0x0 + MX1_PAD_ECB__ECB 0x0 + MX1_PAD_LBA__LBA 0x0 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts new file mode 100644 index 000000000000..07d92fb40e6f --- /dev/null +++ b/arch/arm/boot/dts/imx1-apf9328.dts @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx1.dtsi" + +/ { + model = "Armadeus APF9328"; + compatible = "armadeus,imx1-apf9328", "fsl,imx1"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x08000000 0x00800000>; + }; +}; + +&i2c { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim>; + status = "okay"; + + nor: nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x02000000>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00330e04 0x00000d01>; + #address-cells = <1>; + #size-cells = <1>; + }; + + eth: eth@4,c00000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth>; + compatible = "davicom,dm9000"; + reg = < + 4 0x00c00000 0x2 + 4 0x00c00002 0x2 + >; + interrupt-parent = <&gpio2>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + fsl,weim-cs-timing = <0x0000c700 0x19190d01>; + }; +}; + +&iomuxc { + imx1-apf9328 { + pinctrl_eth: ethgrp { + fsl,pins = < + MX1_PAD_SIM_SVEN__GPIO2_14 0x0 + >; + }; + + pinctrl_i2c: i2cgrp { + fsl,pins = < + MX1_PAD_I2C_SCL__I2C_SCL 0x0 + MX1_PAD_I2C_SDA__I2C_SDA 0x0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX1_PAD_UART1_TXD__UART1_TXD 0x0 + MX1_PAD_UART1_RXD__UART1_RXD 0x0 + MX1_PAD_UART1_CTS__UART1_CTS 0x0 + MX1_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX1_PAD_UART2_TXD__UART2_TXD 0x0 + MX1_PAD_UART2_RXD__UART2_RXD 0x0 + MX1_PAD_UART2_CTS__UART2_CTS 0x0 + MX1_PAD_UART2_RTS__UART2_RTS 0x0 + >; + }; + + pinctrl_weim: weimgrp { + fsl,pins = < + MX1_PAD_A0__A0 0x0 + MX1_PAD_A16__A16 0x0 + MX1_PAD_A17__A17 0x0 + MX1_PAD_A18__A18 0x0 + MX1_PAD_A19__A19 0x0 + MX1_PAD_A20__A20 0x0 + MX1_PAD_A21__A21 0x0 + MX1_PAD_A22__A22 0x0 + MX1_PAD_A23__A23 0x0 + MX1_PAD_A24__A24 0x0 + MX1_PAD_BCLK__BCLK 0x0 + MX1_PAD_CS4__CS4 0x0 + MX1_PAD_DTACK__DTACK 0x0 + MX1_PAD_ECB__ECB 0x0 + MX1_PAD_LBA__LBA 0x0 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx1-pinfunc.h b/arch/arm/boot/dts/imx1-pinfunc.h new file mode 100644 index 000000000000..22bec8b87680 --- /dev/null +++ b/arch/arm/boot/dts/imx1-pinfunc.h @@ -0,0 +1,302 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __DTS_IMX1_PINFUNC_H +#define __DTS_IMX1_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <pin mux_id> + * mux_id consists of + * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10) + * + * function: 0 - Primary function + * 1 - Alternate function + * 2 - GPIO + * direction: 0 - Input + * 1 - Output + * gpio_oconf: 0 - A_IN + * 1 - B_IN + * 2 - A_OUT + * 3 - Data Register + * gpio_iconfa/b: 0 - GPIO_IN + * 1 - Interrupt Status Register + * 2 - 0 + * 3 - 1 + * + * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32 configurable + * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin + * number on the specific port (between 0 and 31). + */ + +#define MX1_PAD_A24__A24 0x00 0x004 +#define MX1_PAD_A24__GPIO1_0 0x00 0x032 +#define MX1_PAD_A24__SPI2_CLK 0x00 0x006 +#define MX1_PAD_TIN__TIN 0x01 0x000 +#define MX1_PAD_TIN__GPIO1_1 0x01 0x032 +#define MX1_PAD_TIN__SPI2_RXD 0x01 0x022 +#define MX1_PAD_PWMO__PWMO 0x02 0x004 +#define MX1_PAD_PWMO__GPIO1_2 0x02 0x032 +#define MX1_PAD_CSI_MCLK__CSI_MCLK 0x03 0x004 +#define MX1_PAD_CSI_MCLK__GPIO1_3 0x03 0x032 +#define MX1_PAD_CSI_D0__CSI_D0 0x04 0x000 +#define MX1_PAD_CSI_D0__GPIO1_4 0x04 0x032 +#define MX1_PAD_CSI_D1__CSI_D1 0x05 0x000 +#define MX1_PAD_CSI_D1__GPIO1_5 0x05 0x032 +#define MX1_PAD_CSI_D2__CSI_D2 0x06 0x000 +#define MX1_PAD_CSI_D2__GPIO1_6 0x06 0x032 +#define MX1_PAD_CSI_D3__CSI_D3 0x07 0x000 +#define MX1_PAD_CSI_D3__GPIO1_7 0x07 0x032 +#define MX1_PAD_CSI_D4__CSI_D4 0x08 0x000 +#define MX1_PAD_CSI_D4__GPIO1_8 0x08 0x032 +#define MX1_PAD_CSI_D5__CSI_D5 0x09 0x000 +#define MX1_PAD_CSI_D5__GPIO1_9 0x09 0x032 +#define MX1_PAD_CSI_D6__CSI_D6 0x0a 0x000 +#define MX1_PAD_CSI_D6__GPIO1_10 0x0a 0x032 +#define MX1_PAD_CSI_D7__CSI_D7 0x0b 0x000 +#define MX1_PAD_CSI_D7__GPIO1_11 0x0b 0x032 +#define MX1_PAD_CSI_VSYNC__CSI_VSYNC 0x0c 0x000 +#define MX1_PAD_CSI_VSYNC__GPIO1_12 0x0c 0x032 +#define MX1_PAD_CSI_HSYNC__CSI_HSYNC 0x0d 0x000 +#define MX1_PAD_CSI_HSYNC__GPIO1_13 0x0d 0x032 +#define MX1_PAD_CSI_PIXCLK__CSI_PIXCLK 0x0e 0x000 +#define MX1_PAD_CSI_PIXCLK__GPIO1_14 0x0e 0x032 +#define MX1_PAD_I2C_SDA__I2C_SDA 0x0f 0x000 +#define MX1_PAD_I2C_SDA__GPIO1_15 0x0f 0x032 +#define MX1_PAD_I2C_SCL__I2C_SCL 0x10 0x004 +#define MX1_PAD_I2C_SCL__GPIO1_16 0x10 0x032 +#define MX1_PAD_DTACK__DTACK 0x11 0x000 +#define MX1_PAD_DTACK__GPIO1_17 0x11 0x032 +#define MX1_PAD_DTACK__SPI2_SS 0x11 0x002 +#define MX1_PAD_DTACK__A25 0x11 0x016 +#define MX1_PAD_BCLK__BCLK 0x12 0x004 +#define MX1_PAD_BCLK__GPIO1_18 0x12 0x032 +#define MX1_PAD_LBA__LBA 0x13 0x004 +#define MX1_PAD_LBA__GPIO1_19 0x13 0x032 +#define MX1_PAD_ECB__ECB 0x14 0x000 +#define MX1_PAD_ECB__GPIO1_20 0x14 0x032 +#define MX1_PAD_A0__A0 0x15 0x004 +#define MX1_PAD_A0__GPIO1_21 0x15 0x032 +#define MX1_PAD_CS4__CS4 0x16 0x004 +#define MX1_PAD_CS4__GPIO1_22 0x16 0x032 +#define MX1_PAD_CS5__CS5 0x17 0x004 +#define MX1_PAD_CS5__GPIO1_23 0x17 0x032 +#define MX1_PAD_A16__A16 0x18 0x004 +#define MX1_PAD_A16__GPIO1_24 0x18 0x032 +#define MX1_PAD_A17__A17 0x19 0x004 +#define MX1_PAD_A17__GPIO1_25 0x19 0x032 +#define MX1_PAD_A18__A18 0x1a 0x004 +#define MX1_PAD_A18__GPIO1_26 0x1a 0x032 +#define MX1_PAD_A19__A19 0x1b 0x004 +#define MX1_PAD_A19__GPIO1_27 0x1b 0x032 +#define MX1_PAD_A20__A20 0x1c 0x004 +#define MX1_PAD_A20__GPIO1_28 0x1c 0x032 +#define MX1_PAD_A21__A21 0x1d 0x004 +#define MX1_PAD_A21__GPIO1_29 0x1d 0x032 +#define MX1_PAD_A22__A22 0x1e 0x004 +#define MX1_PAD_A22__GPIO1_30 0x1e 0x032 +#define MX1_PAD_A23__A23 0x1f 0x004 +#define MX1_PAD_A23__GPIO1_31 0x1f 0x032 +#define MX1_PAD_SD_DAT0__SD_DAT0 0x28 0x000 +#define MX1_PAD_SD_DAT0__MS_PI0 0x28 0x001 +#define MX1_PAD_SD_DAT0__GPIO2_8 0x28 0x032 +#define MX1_PAD_SD_DAT1__SD_DAT1 0x29 0x000 +#define MX1_PAD_SD_DAT1__MS_PI1 0x29 0x001 +#define MX1_PAD_SD_DAT1__GPIO2_9 0x29 0x032 +#define MX1_PAD_SD_DAT2__SD_DAT2 0x2a 0x000 +#define MX1_PAD_SD_DAT2__MS_SCLKI 0x2a 0x001 +#define MX1_PAD_SD_DAT2__GPIO2_10 0x2a 0x032 +#define MX1_PAD_SD_DAT3__SD_DAT3 0x2b 0x000 +#define MX1_PAD_SD_DAT3__MS_SDIO 0x2b 0x001 +#define MX1_PAD_SD_DAT3__GPIO2_11 0x2b 0x032 +#define MX1_PAD_SD_SCLK__SD_SCLK 0x2c 0x004 +#define MX1_PAD_SD_SCLK__MS_SCLKO 0x2c 0x005 +#define MX1_PAD_SD_SCLK__GPIO2_12 0x2c 0x032 +#define MX1_PAD_SD_CMD__SD_CMD 0x2d 0x000 +#define MX1_PAD_SD_CMD__MS_BS 0x2d 0x005 +#define MX1_PAD_SD_CMD__GPIO2_13 0x2d 0x032 +#define MX1_PAD_SIM_SVEN__SIM_SVEN 0x2e 0x004 +#define MX1_PAD_SIM_SVEN__SSI_RXFS 0x2e 0x001 +#define MX1_PAD_SIM_SVEN__GPIO2_14 0x2e 0x032 +#define MX1_PAD_SIM_PD__SIM_PD 0x2f 0x000 +#define MX1_PAD_SIM_PD__SSI_RXCLK 0x2f 0x001 +#define MX1_PAD_SIM_PD__GPIO2_15 0x2f 0x032 +#define MX1_PAD_SIM_TX__SIM_TX 0x30 0x000 +#define MX1_PAD_SIM_TX__SSI_RXDAT 0x30 0x001 +#define MX1_PAD_SIM_TX__GPIO2_16 0x30 0x032 +#define MX1_PAD_SIM_RX__SIM_RX 0x31 0x000 +#define MX1_PAD_SIM_RX__SSI_TXDAT 0x31 0x005 +#define MX1_PAD_SIM_RX__GPIO2_17 0x31 0x032 +#define MX1_PAD_SIM_RST__SIM_RST 0x32 0x004 +#define MX1_PAD_SIM_RST__SSI_TXFS 0x32 0x001 +#define MX1_PAD_SIM_RST__GPIO2_18 0x32 0x032 +#define MX1_PAD_SIM_CLK__SIM_CLK 0x33 0x004 +#define MX1_PAD_SIM_CLK__SSI_TXCLK 0x33 0x001 +#define MX1_PAD_SIM_CLK__GPIO2_19 0x33 0x032 +#define MX1_PAD_USBD_AFE__USBD_AFE 0x34 0x004 +#define MX1_PAD_USBD_AFE__GPIO2_20 0x34 0x032 +#define MX1_PAD_USBD_OE__USBD_OE 0x35 0x004 +#define MX1_PAD_USBD_OE__GPIO2_21 0x35 0x032 +#define MX1_PAD_USBD_RCV__USBD_RCV 0x36 0x000 +#define MX1_PAD_USBD_RCV__GPIO2_22 0x36 0x032 +#define MX1_PAD_USBD_SUSPND__USBD_SUSPND 0x37 0x004 +#define MX1_PAD_USBD_SUSPND__GPIO2_23 0x37 0x032 +#define MX1_PAD_USBD_VP__USBD_VP 0x38 0x000 +#define MX1_PAD_USBD_VP__GPIO2_24 0x38 0x032 +#define MX1_PAD_USBD_VM__USBD_VM 0x39 0x000 +#define MX1_PAD_USBD_VM__GPIO2_25 0x39 0x032 +#define MX1_PAD_USBD_VPO__USBD_VPO 0x3a 0x004 +#define MX1_PAD_USBD_VPO__GPIO2_26 0x3a 0x032 +#define MX1_PAD_USBD_VMO__USBD_VMO 0x3b 0x004 +#define MX1_PAD_USBD_VMO__GPIO2_27 0x3b 0x032 +#define MX1_PAD_UART2_CTS__UART2_CTS 0x3c 0x004 +#define MX1_PAD_UART2_CTS__GPIO2_28 0x3c 0x032 +#define MX1_PAD_UART2_RTS__UART2_RTS 0x3d 0x000 +#define MX1_PAD_UART2_RTS__GPIO2_29 0x3d 0x032 +#define MX1_PAD_UART2_TXD__UART2_TXD 0x3e 0x004 +#define MX1_PAD_UART2_TXD__GPIO2_30 0x3e 0x032 +#define MX1_PAD_UART2_RXD__UART2_RXD 0x3f 0x000 +#define MX1_PAD_UART2_RXD__GPIO2_31 0x3f 0x032 +#define MX1_PAD_SSI_RXFS__SSI_RXFS 0x43 0x000 +#define MX1_PAD_SSI_RXFS__GPIO3_3 0x43 0x032 +#define MX1_PAD_SSI_RXCLK__SSI_RXCLK 0x44 0x000 +#define MX1_PAD_SSI_RXCLK__GPIO3_4 0x44 0x032 +#define MX1_PAD_SSI_RXDAT__SSI_RXDAT 0x45 0x000 +#define MX1_PAD_SSI_RXDAT__GPIO3_5 0x45 0x032 +#define MX1_PAD_SSI_TXDAT__SSI_TXDAT 0x46 0x004 +#define MX1_PAD_SSI_TXDAT__GPIO3_6 0x46 0x032 +#define MX1_PAD_SSI_TXFS__SSI_TXFS 0x47 0x000 +#define MX1_PAD_SSI_TXFS__GPIO3_7 0x47 0x032 +#define MX1_PAD_SSI_TXCLK__SSI_TXCLK 0x48 0x000 +#define MX1_PAD_SSI_TXCLK__GPIO3_8 0x48 0x032 +#define MX1_PAD_UART1_CTS__UART1_CTS 0x49 0x004 +#define MX1_PAD_UART1_CTS__GPIO3_9 0x49 0x032 +#define MX1_PAD_UART1_RTS__UART1_RTS 0x4a 0x000 +#define MX1_PAD_UART1_RTS__GPIO3_10 0x4a 0x032 +#define MX1_PAD_UART1_TXD__UART1_TXD 0x4b 0x004 +#define MX1_PAD_UART1_TXD__GPIO3_11 0x4b 0x032 +#define MX1_PAD_UART1_RXD__UART1_RXD 0x4c 0x000 +#define MX1_PAD_UART1_RXD__GPIO3_12 0x4c 0x032 +#define MX1_PAD_SPI1_RDY__SPI1_RDY 0x4d 0x000 +#define MX1_PAD_SPI1_RDY__GPIO3_13 0x4d 0x032 +#define MX1_PAD_SPI1_SCLK__SPI1_SCLK 0x4e 0x004 +#define MX1_PAD_SPI1_SCLK__GPIO3_14 0x4e 0x032 +#define MX1_PAD_SPI1_SS__SPI1_SS 0x4f 0x000 +#define MX1_PAD_SPI1_SS__GPIO3_15 0x4f 0x032 +#define MX1_PAD_SPI1_MISO__SPI1_MISO 0x50 0x000 +#define MX1_PAD_SPI1_MISO__GPIO3_16 0x50 0x032 +#define MX1_PAD_SPI1_MOSI__SPI1_MOSI 0x51 0x004 +#define MX1_PAD_SPI1_MOSI__GPIO3_17 0x51 0x032 +#define MX1_PAD_BT13__BT13 0x53 0x004 +#define MX1_PAD_BT13__SSI2_RXCLK 0x53 0x001 +#define MX1_PAD_BT13__GPIO3_19 0x53 0x032 +#define MX1_PAD_BT12__BT12 0x54 0x004 +#define MX1_PAD_BT12__SSI2_TXFS 0x54 0x001 +#define MX1_PAD_BT12__GPIO3_20 0x54 0x032 +#define MX1_PAD_BT11__BT11 0x55 0x004 +#define MX1_PAD_BT11__SSI2_TXCLK 0x55 0x001 +#define MX1_PAD_BT11__GPIO3_21 0x55 0x032 +#define MX1_PAD_BT10__BT10 0x56 0x004 +#define MX1_PAD_BT10__SSI2_TX 0x56 0x001 +#define MX1_PAD_BT10__GPIO3_22 0x56 0x032 +#define MX1_PAD_BT9__BT9 0x57 0x004 +#define MX1_PAD_BT9__SSI2_RX 0x57 0x001 +#define MX1_PAD_BT9__GPIO3_23 0x57 0x032 +#define MX1_PAD_BT8__BT8 0x58 0x004 +#define MX1_PAD_BT8__SSI2_RXFS 0x58 0x001 +#define MX1_PAD_BT8__GPIO3_24 0x58 0x032 +#define MX1_PAD_BT8__UART3_RI 0x58 0x016 +#define MX1_PAD_BT7__BT7 0x59 0x004 +#define MX1_PAD_BT7__GPIO3_25 0x59 0x032 +#define MX1_PAD_BT7__UART3_DSR 0x59 0x016 +#define MX1_PAD_BT6__BT6 0x5a 0x004 +#define MX1_PAD_BT6__GPIO3_26 0x5a 0x032 +#define MX1_PAD_BT6__SPI2_SS3 0x5a 0x016 +#define MX1_PAD_BT6__UART3_DTR 0x5a 0x022 +#define MX1_PAD_BT5__BT5 0x5b 0x000 +#define MX1_PAD_BT5__GPIO3_27 0x5b 0x032 +#define MX1_PAD_BT5__UART3_DCD 0x5b 0x016 +#define MX1_PAD_BT4__BT4 0x5c 0x000 +#define MX1_PAD_BT4__GPIO3_28 0x5c 0x032 +#define MX1_PAD_BT4__UART3_CTS 0x5c 0x016 +#define MX1_PAD_BT3__BT3 0x5d 0x000 +#define MX1_PAD_BT3__GPIO3_29 0x5d 0x032 +#define MX1_PAD_BT3__UART3_RTS 0x5d 0x022 +#define MX1_PAD_BT2__BT2 0x5e 0x004 +#define MX1_PAD_BT2__GPIO3_30 0x5e 0x032 +#define MX1_PAD_BT2__UART3_TX 0x5e 0x016 +#define MX1_PAD_BT1__BT1 0x5f 0x000 +#define MX1_PAD_BT1__GPIO3_31 0x5f 0x032 +#define MX1_PAD_BT1__UART3_RX 0x5f 0x022 +#define MX1_PAD_LSCLK__LSCLK 0x66 0x004 +#define MX1_PAD_LSCLK__GPIO4_6 0x66 0x032 +#define MX1_PAD_REV__REV 0x67 0x004 +#define MX1_PAD_REV__UART2_DTR 0x67 0x001 +#define MX1_PAD_REV__GPIO4_7 0x67 0x032 +#define MX1_PAD_REV__SPI2_CLK 0x67 0x006 +#define MX1_PAD_CLS__CLS 0x68 0x004 +#define MX1_PAD_CLS__UART2_DCD 0x68 0x005 +#define MX1_PAD_CLS__GPIO4_8 0x68 0x032 +#define MX1_PAD_CLS__SPI2_SS 0x68 0x002 +#define MX1_PAD_PS__PS 0x69 0x004 +#define MX1_PAD_PS__UART2_RI 0x69 0x005 +#define MX1_PAD_PS__GPIO4_9 0x69 0x032 +#define MX1_PAD_PS__SPI2_RXD 0x69 0x022 +#define MX1_PAD_SPL_SPR__SPL_SPR 0x6a 0x004 +#define MX1_PAD_SPL_SPR__UART2_DSR 0x6a 0x005 +#define MX1_PAD_SPL_SPR__GPIO4_10 0x6a 0x032 +#define MX1_PAD_SPL_SPR__SPI2_TXD 0x6a 0x006 +#define MX1_PAD_CONTRAST__CONTRAST 0x6b 0x004 +#define MX1_PAD_CONTRAST__GPIO4_11 0x6b 0x032 +#define MX1_PAD_CONTRAST__SPI2_SS2 0x6b 0x012 +#define MX1_PAD_ACD_OE__ACD_OE 0x6c 0x004 +#define MX1_PAD_ACD_OE__GPIO4_12 0x6c 0x032 +#define MX1_PAD_LP_HSYNC__LP_HSYNC 0x6d 0x004 +#define MX1_PAD_LP_HSYNC__GPIO4_13 0x6d 0x032 +#define MX1_PAD_FLM_VSYNC__FLM_VSYNC 0x6e 0x004 +#define MX1_PAD_FLM_VSYNC__GPIO4_14 0x6e 0x032 +#define MX1_PAD_LD0__LD0 0x6f 0x004 +#define MX1_PAD_LD0__GPIO4_15 0x6f 0x032 +#define MX1_PAD_LD1__LD1 0x70 0x004 +#define MX1_PAD_LD1__GPIO4_16 0x70 0x032 +#define MX1_PAD_LD2__LD2 0x71 0x004 +#define MX1_PAD_LD2__GPIO4_17 0x71 0x032 +#define MX1_PAD_LD3__LD3 0x72 0x004 +#define MX1_PAD_LD3__GPIO4_18 0x72 0x032 +#define MX1_PAD_LD4__LD4 0x73 0x004 +#define MX1_PAD_LD4__GPIO4_19 0x73 0x032 +#define MX1_PAD_LD5__LD5 0x74 0x004 +#define MX1_PAD_LD5__GPIO4_20 0x74 0x032 +#define MX1_PAD_LD6__LD6 0x75 0x004 +#define MX1_PAD_LD6__GPIO4_21 0x75 0x032 +#define MX1_PAD_LD7__LD7 0x76 0x004 +#define MX1_PAD_LD7__GPIO4_22 0x76 0x032 +#define MX1_PAD_LD8__LD8 0x77 0x004 +#define MX1_PAD_LD8__GPIO4_23 0x77 0x032 +#define MX1_PAD_LD9__LD9 0x78 0x004 +#define MX1_PAD_LD9__GPIO4_24 0x78 0x032 +#define MX1_PAD_LD10__LD10 0x79 0x004 +#define MX1_PAD_LD10__GPIO4_25 0x79 0x032 +#define MX1_PAD_LD11__LD11 0x7a 0x004 +#define MX1_PAD_LD11__GPIO4_26 0x7a 0x032 +#define MX1_PAD_LD12__LD12 0x7b 0x004 +#define MX1_PAD_LD12__GPIO4_27 0x7b 0x032 +#define MX1_PAD_LD13__LD13 0x7c 0x004 +#define MX1_PAD_LD13__GPIO4_28 0x7c 0x032 +#define MX1_PAD_LD14__LD14 0x7d 0x004 +#define MX1_PAD_LD14__GPIO4_29 0x7d 0x032 +#define MX1_PAD_LD15__LD15 0x7e 0x004 +#define MX1_PAD_LD15__GPIO4_30 0x7e 0x032 +#define MX1_PAD_TMR2OUT__TMR2OUT 0x7f 0x000 +#define MX1_PAD_TMR2OUT__GPIO4_31 0x7f 0x032 +#define MX1_PAD_TMR2OUT__SPI2_TXD 0x7f 0x006 + +#endif diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi new file mode 100644 index 000000000000..22f5d1db5b31 --- /dev/null +++ b/arch/arm/boot/dts/imx1.dtsi @@ -0,0 +1,266 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "skeleton.dtsi" +#include "imx1-pinfunc.h" + +#include <dt-bindings/clock/imx1-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + i2c0 = &i2c; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + spi0 = &cspi1; + spi1 = &cspi2; + }; + + aitc: aitc-interrupt-controller@00223000 { + compatible = "fsl,imx1-aitc", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x00223000 0x1000>; + }; + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu: cpu@0 { + device_type = "cpu"; + compatible = "arm,arm920t"; + operating-points = <200000 1900000>; + clock-latency = <62500>; + clocks = <&clks IMX1_CLK_MCU>; + voltage-tolerance = <5>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&aitc>; + ranges; + + aipi@00200000 { + compatible = "fsl,aipi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00200000 0x10000>; + ranges; + + gpt1: timer@00202000 { + compatible = "fsl,imx1-gpt"; + reg = <0x00202000 0x1000>; + interrupts = <59>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; + + gpt2: timer@00203000 { + compatible = "fsl,imx1-gpt"; + reg = <0x00203000 0x1000>; + interrupts = <58>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; + + fb: fb@00205000 { + compatible = "fsl,imx1-fb"; + reg = <0x00205000 0x1000>; + interrupts = <14>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER2>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + uart1: serial@00206000 { + compatible = "fsl,imx1-uart"; + reg = <0x00206000 0x1000>; + interrupts = <30 29 26>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@00207000 { + compatible = "fsl,imx1-uart"; + reg = <0x00207000 0x1000>; + interrupts = <24 23 20>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + pwm: pwm@00208000 { + #pwm-cells = <2>; + compatible = "fsl,imx1-pwm"; + reg = <0x00208000 0x1000>; + interrupts = <34>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; + + dma: dma@00209000 { + compatible = "fsl,imx1-dma"; + reg = <0x00209000 0x1000>; + interrupts = <61 60>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_DMA_GATE>; + clock-names = "ipg", "ahb"; + #dma-cells = <1>; + }; + + uart3: serial@0020a000 { + compatible = "fsl,imx1-uart"; + reg = <0x0020a000 0x1000>; + interrupts = <54 4 1>; + clocks = <&clks IMX1_CLK_UART3_GATE>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + aipi@00210000 { + compatible = "fsl,aipi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00210000 0x10000>; + ranges; + + cspi1: cspi@00213000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx1-cspi"; + reg = <0x00213000 0x1000>; + interrupts = <41>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c: i2c@00217000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx1-i2c"; + reg = <0x00217000 0x1000>; + interrupts = <39>; + clocks = <&clks IMX1_CLK_HCLK>; + status = "disabled"; + }; + + cspi2: cspi@00219000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx1-cspi"; + reg = <0x00219000 0x1000>; + interrupts = <40>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + clks: ccm@0021b000 { + compatible = "fsl,imx1-ccm"; + reg = <0x0021b000 0x1000>; + #clock-cells = <1>; + }; + + iomuxc: iomuxc@0021c000 { + compatible = "fsl,imx1-iomuxc"; + reg = <0x0021c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@0021c000 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c000 0x100>; + interrupts = <11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@0021c100 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c100 0x100>; + interrupts = <12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@0021c200 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c200 0x100>; + interrupts = <13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@0021c300 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c300 0x100>; + interrupts = <62>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + + weim: weim@00220000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,imx1-weim"; + reg = <0x00220000 0x1000>; + clocks = <&clks IMX1_CLK_DUMMY>; + ranges = < + 0 0 0x10000000 0x02000000 + 1 0 0x12000000 0x01000000 + 2 0 0x13000000 0x01000000 + 3 0 0x14000000 0x01000000 + 4 0 0x15000000 0x01000000 + 5 0 0x16000000 0x01000000 + >; + status = "disabled"; + }; + + esram: esram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x20000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index a33f66c11b73..57e29977ba06 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -60,10 +60,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a>; lcd-supply = <®_lcd_3v3>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index 9238a95d8e62..88eebb15da6a 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -247,6 +247,7 @@ #define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000 #define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000 +#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x11 0x000 #define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x14 0x000 #define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x15 0x001 @@ -260,6 +261,7 @@ #define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000 #define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000 +#define MX25_PAD_CSI_D3__UART5_TXD_MUX 0x124 0x31c 0x000 0x11 0x000 #define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000 #define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001 @@ -269,31 +271,46 @@ #define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000 #define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000 +#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x001 #define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000 #define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000 #define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000 +#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001 #define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000 #define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000 +#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK 0x134 0x32C 0x4dc 0x12 0x001 #define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000 #define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000 +#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x001 #define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000 +#define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x17 0x000 #define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000 +#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x001 #define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000 +#define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x17 0x000 #define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000 +#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x001 +#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x12 0x001 #define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000 #define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000 +#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x001 +#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x12 0x001 #define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000 #define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000 +#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x001 +#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x12 0x001 #define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000 #define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000 +#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x001 +#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x12 0x001 #define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000 #define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x10 0x000 @@ -303,18 +320,24 @@ #define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x15 0x000 #define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_MOSI__UART3_RXD 0x158 0x350 0x000 0x12 0x000 #define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x15 0x000 #define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_MISO__UART3_TXD 0x15c 0x354 0x000 0x12 0x000 #define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x15 0x000 #define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_SS0__PWM2_PWMO 0x160 0x358 0x000 0x12 0x000 #define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x15 0x000 #define MX25_PAD_CSPI1_SS1__CSPI1_SS1 0x164 0x35c 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_SS1__I2C3_DAT 0x164 0x35C 0x528 0x11 0x001 +#define MX25_PAD_CSPI1_SS1__UART3_RTS 0x164 0x35c 0x000 0x12 0x000 #define MX25_PAD_CSPI1_SS1__GPIO_1_17 0x164 0x35c 0x000 0x15 0x000 #define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_SCLK__UART3_CTS 0x168 0x360 0x000 0x12 0x000 #define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x15 0x000 #define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x10 0x000 @@ -328,6 +351,7 @@ #define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x10 0x000 #define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x11 0x001 +#define MX25_PAD_UART1_RTS__CC3 0x178 0x370 0x000 0x12 0x000 #define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x15 0x000 #define MX25_PAD_UART1_CTS__UART1_CTS 0x17c 0x374 0x000 0x10 0x000 @@ -342,6 +366,7 @@ #define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x10 0x000 #define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x12 0x002 +#define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x13 0x000 #define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000 #define MX25_PAD_UART2_CTS__FEC_RX_ER 0x18c 0x384 0x518 0x12 0x002 @@ -349,14 +374,17 @@ #define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000 #define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000 +#define MX25_PAD_SD1_CMD__CSPI2_MOSI 0x190 0x388 0x4a0 0x11 0x001 #define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x12 0x002 #define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x15 0x000 #define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x10 0x000 +#define MX25_PAD_SD1_CLK__CSPI2_MISO 0x194 0x38c 0x49c 0x11 0x001 #define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x12 0x002 #define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x15 0x000 #define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x10 0x000 +#define MX25_PAD_SD1_DATA0__CSPI2_SCLK 0x198 0x390 0x494 0x11 0x001 #define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x15 0x000 #define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x10 0x000 @@ -457,14 +485,15 @@ #define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000 #define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000 -#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000 #define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001 #define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000 -#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000 +#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x11 0x002 +#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x12 0x000 #define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000 #define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000 +#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x12 0x000 #define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000 #define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000 diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index c1740396b2c9..58d3c3cf2923 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -239,6 +239,7 @@ }; ssi2: ssi@50014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; reg = <0x50014000 0x4000>; interrupts = <11>; @@ -274,6 +275,7 @@ }; ssi1: ssi@50034000 { + #sound-dai-cells = <0>; compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; reg = <0x50034000 0x4000>; interrupts = <12>; @@ -453,7 +455,7 @@ }; sdma: sdma@53fd4000 { - compatible = "fsl,imx25-sdma", "fsl,imx35-sdma"; + compatible = "fsl,imx25-sdma"; reg = <0x53fd4000 0x4000>; clocks = <&clks 112>, <&clks 68>; clock-names = "ipg", "ahb"; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index 2b6d489dae69..da306c5dd678 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -67,6 +67,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>; status = "okay"; + + adc@0 { + compatible = "maxim,max1027"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max1027>; + spi-max-frequency = <10000000>; + }; }; &cspi2 { @@ -189,6 +199,13 @@ >; }; + pinctrl_max1027: max1027 { + fsl,pins = < + MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */ + MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */ + >; + }; + pinctrl_pwm: pwmgrp { fsl,pins = < MX27_PAD_PWMO__PWMO 0x0 diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 221cac4fb2cd..1f38a052ad4b 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -83,10 +83,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_16bit_pins_a &lcdif_pins_apf28dev>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <16>; bus-width = <16>; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index e1ce9179db63..1092b761d7ac 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -94,10 +94,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_apx4>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 7d51459de5e8..ef944b6d4f01 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -177,10 +177,10 @@ pinctrl-0 = <&lcdif_18bit_pins_cfa10049 &lcdif_pins_cfa10049 &lcdif_pins_cfa10049_pullup>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <18>; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index c3900e7ba331..6a34114bec29 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -92,10 +92,10 @@ pinctrl-0 = <&lcdif_18bit_pins_cfa10055 &lcdif_pins_cfa10055 &lcdif_pins_cfa10055_pullup>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <18>; diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts index cef959a97219..ba6495ca44d2 100644 --- a/arch/arm/boot/dts/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -64,10 +64,10 @@ pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_cfa10056 &lcdif_pins_cfa10056_pullup >; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index c4e00ce4b6da..5df0b24eaf59 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -78,10 +78,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_18bit_pins_cfa10057 &lcdif_pins_cfa10057>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <18>; diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts index 7c9cc783f0d1..f5c6dce34abe 100644 --- a/arch/arm/boot/dts/imx28-cfa10058.dts +++ b/arch/arm/boot/dts/imx28-cfa10058.dts @@ -51,10 +51,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_cfa10058>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index e4cc44c98585..09664fcf5afb 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -124,10 +124,10 @@ pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_evk>; lcd-supply = <®_lcd_3v3>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index 9348ce59dda4..2df63bee6f4e 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -115,10 +115,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_m28>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display0 { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index b3c09ae3b928..e35cc6ba3ca6 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -81,10 +81,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_m28>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <16>; bus-width = <18>; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index e14bd86f3e99..a5b27c85a91c 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -21,12 +21,15 @@ aliases { can0 = &can0; can1 = &can1; - display = &display; + display = &display0; ds1339 = &ds1339; gpio5 = &gpio5; lcdif = &lcdif; lcdif_23bit_pins = &tx28_lcdif_23bit_pins; lcdif_24bit_pins = &lcdif_24bit_pins_a; + reg_can_xcvr = ®_can_xcvr; + spi_gpio = &spi_gpio; + spi_mxs = &ssp3; stk5led = &user_led; usbotg = &usb0; }; @@ -37,7 +40,7 @@ onewire { compatible = "w1-gpio"; - gpios = <&gpio2 7 0>; + gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -52,7 +55,7 @@ regulator-name = "usb0_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio0 18 0>; + gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -62,7 +65,7 @@ regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 27 0>; + gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -90,7 +93,7 @@ regulator-name = "CAN XCVR"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio1 0 0>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&tx28_flexcan_xcvr_pins>; }; @@ -101,7 +104,7 @@ regulator-name = "LCD POWER"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio1 31 0>; + gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -111,7 +114,7 @@ regulator-name = "LCD RESET"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio3 30 0>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; startup-delay-us = <300000>; enable-active-high; regulator-always-on; @@ -143,7 +146,7 @@ user_led: user { label = "Heartbeat"; - gpios = <&gpio4 10 0>; + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -172,16 +175,16 @@ matrix_keypad: matrix-keypad@0 { compatible = "gpio-matrix-keypad"; col-gpios = < - &gpio5 0 0 - &gpio5 1 0 - &gpio5 2 0 - &gpio5 3 0 + &gpio5 0 GPIO_ACTIVE_HIGH + &gpio5 1 GPIO_ACTIVE_HIGH + &gpio5 2 GPIO_ACTIVE_HIGH + &gpio5 3 GPIO_ACTIVE_HIGH >; row-gpios = < - &gpio5 4 0 - &gpio5 5 0 - &gpio5 6 0 - &gpio5 7 0 + &gpio5 4 GPIO_ACTIVE_HIGH + &gpio5 5 GPIO_ACTIVE_HIGH + &gpio5 6 GPIO_ACTIVE_HIGH + &gpio5 7 GPIO_ACTIVE_HIGH >; /* sample keymap */ linux,keymap = < @@ -203,6 +206,44 @@ col-scan-delay-us = <5000>; linux,no-autorepeat; }; + + spi_gpio: spi-gpio { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&tx28_spi_gpio_pins>; + + gpio-sck = <&gpio2 24 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio2 25 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio2 26 GPIO_ACTIVE_HIGH>; + num-chipselects = <3>; + cs-gpios = < + &gpio2 27 GPIO_ACTIVE_LOW + &gpio3 8 GPIO_ACTIVE_LOW + &gpio3 9 GPIO_ACTIVE_LOW + >; + /* enable this and disable ssp3 below, if you need full duplex SPI transfer */ + status = "disabled"; + + spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <57600000>; + }; + + spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <57600000>; + }; + + spi@2 { + compatible = "spidev"; + reg = <2>; + spi-max-frequency = <57600000>; + }; + }; }; /* 2nd TX-Std UART - (A)UART1 */ @@ -284,8 +325,8 @@ pinctrl-0 = <&tx28_edt_ft5x06_pins>; interrupt-parent = <&gpio2>; interrupts = <5 0>; - reset-gpios = <&gpio2 6 1>; - wake-gpios = <&gpio4 9 0>; + reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; }; touchscreen: tsc2007@48 { @@ -295,7 +336,7 @@ pinctrl-0 = <&tx28_tsc2007_pins>; interrupt-parent = <&gpio3>; interrupts = <20 0>; - pendown-gpio = <&gpio3 20 1>; + pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = /bits/ 16 <660>; }; @@ -309,10 +350,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>; lcd-supply = <®_lcd>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display@0 { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; display-timings { @@ -558,6 +599,20 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + tx28_spi_gpio_pins: spi-gpiogrp { + fsl,pinmux-ids = < + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_AUART2_TX__GPIO_3_9 + MX28_PAD_SSP3_SCK__GPIO_2_24 + MX28_PAD_SSP3_MOSI__GPIO_2_25 + MX28_PAD_SSP3_MISO__GPIO_2_26 + MX28_PAD_SSP3_SS0__GPIO_2_27 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + tx28_tsc2007_pins: tx28-tsc2007-pins { fsl,pinmux-ids = < MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */ @@ -619,17 +674,23 @@ clock-frequency = <57600000>; status = "okay"; - spidev0: spi@0 { + spi@0 { compatible = "spidev"; reg = <0>; spi-max-frequency = <57600000>; }; - spidev1: spi@1 { + spi@1 { compatible = "spidev"; reg = <1>; spi-max-frequency = <57600000>; }; + + spi@2 { + compatible = "spidev"; + reg = <2>; + spi-max-frequency = <57600000>; + }; }; &usb0 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index a95cc5358ff4..47f68ac868d4 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -489,6 +489,38 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + mmc1_4bit_pins_a: mmc1-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D00__SSP1_D0 + MX28_PAD_GPMI_D01__SSP1_D1 + MX28_PAD_GPMI_D02__SSP1_D2 + MX28_PAD_GPMI_D03__SSP1_D3 + MX28_PAD_GPMI_RDY1__SSP1_CMD + MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT + MX28_PAD_GPMI_WRN__SSP1_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + mmc1_cd_cfg: mmc1-cd-cfg { + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT + >; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc1_sck_cfg: mmc1-sck-cfg { + fsl,pinmux-ids = < + MX28_PAD_GPMI_WRN__SSP1_SCK + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc2_4bit_pins_a: mmc2-4bit@0 { reg = <0>; fsl,pinmux-ids = < @@ -553,6 +585,17 @@ fsl,pull-up = <MXS_PULL_ENABLE>; }; + i2c1_pins_b: i2c1@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_AUART2_CTS__I2C1_SCL + MX28_PAD_AUART2_RTS__I2C1_SDA + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + saif0_pins_a: saif0@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 442e216ca9d9..6932928f3b45 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -114,6 +114,7 @@ }; ssi1: ssi@43fa0000 { + #sound-dai-cells = <0>; compatible = "fsl,imx35-ssi", "fsl,imx21-ssi"; reg = <0x43fa0000 0x4000>; interrupts = <11>; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index c0e0f60ab6b2..620b0f030591 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -145,6 +145,7 @@ }; ssi2: ssi@50014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx50-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; @@ -454,6 +455,7 @@ }; ssi1: ssi@63fcc000 { + #sound-dai-cells = <0>; compatible = "fsl,imx50-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x63fcc000 0x4000>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 17c05a6fa776..92660e1fe1fc 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -210,6 +210,7 @@ }; ssi2: ssi@70014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x70014000 0x4000>; interrupts = <30>; @@ -499,6 +500,7 @@ }; ssi1: ssi@83fcc000 { + #sound-dai-cells = <0>; compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fcc000 0x4000>; interrupts = <29>; @@ -554,6 +556,7 @@ }; ssi3: ssi@83fe8000 { + #sound-dai-cells = <0>; compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fe8000 0x4000>; interrupts = <96>; diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index f1bbf9a32991..82d623d05915 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -28,6 +28,12 @@ MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec >; }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */ + >; + }; }; }; @@ -38,6 +44,8 @@ pmic: mc34708@8 { compatible = "fsl,mc34708"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; reg = <0x08>; interrupt-parent = <&gpio5>; interrupts = <23 0x8>; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 5ec1590ff7bc..1d325576bcc0 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -265,7 +265,7 @@ }; pmic: dialog@48 { - compatible = "dialog,da9053", "dialog,da9052"; + compatible = "dlg,da9053", "dlg,da9052"; reg = <0x48>; }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 64fa27b36be0..6b198c6d4da5 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -221,6 +221,7 @@ }; ssi2: ssi@50014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; @@ -661,6 +662,7 @@ }; ssi1: ssi@63fcc000 { + #sound-dai-cells = <0>; compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x63fcc000 0x4000>; @@ -688,6 +690,7 @@ }; ssi3: ssi@63fe8000 { + #sound-dai-cells = <0>; compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x63fe8000 0x4000>; @@ -731,7 +734,7 @@ compatible = "fsl,imx53-vpu"; reg = <0x63ff4000 0x1000>; interrupts = <9>; - clocks = <&clks IMX5_CLK_VPU_GATE>, + clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, <&clks IMX5_CLK_VPU_GATE>; clock-names = "per", "ahb"; resets = <&src 1>; @@ -744,5 +747,10 @@ reg = <0xf8000000 0x20000>; clocks = <&clks IMX5_CLK_OCRAM>; }; + + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <77>; + }; }; }; diff --git a/arch/arm/boot/dts/imx6dl-gw552x.dts b/arch/arm/boot/dts/imx6dl-gw552x.dts new file mode 100644 index 000000000000..a4b700cef188 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-gw552x.dts @@ -0,0 +1,20 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-gw552x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 DualLite/Solo GW552X"; + compatible = "gw,imx6dl-gw552x", "gw,ventana", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index c8e51dd41b8f..44a0e6736bb1 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -1,204 +1,13 @@ /* - * Copyright (C) 2013,2014 Russell King + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King */ /dts-v1/; #include "imx6dl.dtsi" -#include "imx6qdl-microsom.dtsi" -#include "imx6qdl-microsom-ar8035.dtsi" +#include "imx6qdl-hummingboard.dtsi" / { - model = "SolidRun HummingBoard DL/Solo"; - compatible = "solidrun,hummingboard", "fsl,imx6dl"; - - chosen { - stdout-path = &uart1; - }; - - ir_recv: ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio1 2 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_gpio1_2>; - }; - - regulators { - compatible = "simple-bus"; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_usbh1_vbus: usb-h1-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 0 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbotg_vbus: usb-otg-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 22 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - }; - - sound-spdif { - compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; - /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; - status = "okay"; -}; - -&hdmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_hdmi>; - ddc-i2c-bus = <&i2c2>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_i2c1>; - - /* - * Not fitted on Carrier-1 board... yet - status = "okay"; - - rtc: pcf8523@68 { - compatible = "nxp,pcf8523"; - reg = <0x68>; - }; - */ -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_i2c2>; - status = "okay"; -}; - -&iomuxc { - hummingboard { - pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { - fsl,pins = < - MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 - >; - }; - - pinctrl_hummingboard_gpio1_2: hummingboard-gpio1_2 { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 - >; - }; - - pinctrl_hummingboard_hdmi: hummingboard-hdmi { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; - - pinctrl_hummingboard_i2c1: hummingboard-i2c1 { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_hummingboard_i2c2: hummingboard-i2c2 { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_hummingboard_spdif: hummingboard-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; - }; - - pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { - fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; - }; - - pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { - /* - * Similar to pinctrl_usbotg_2, but we want it - * pulled down for a fixed host connection. - */ - fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; - }; - - pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { - fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; - }; - - pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 - >; - }; - - pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 - >; - }; - }; -}; - -&spdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_spdif>; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usbh1_vbus>; - status = "okay"; -}; - -&usbotg { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; - vbus-supply = <®_usbotg_vbus>; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = < - &pinctrl_hummingboard_usdhc2_aux - &pinctrl_hummingboard_usdhc2 - >; - vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio1 4 0>; - status = "okay"; + model = "SolidRun HummingBoard Solo/DualLite"; + compatible = "solidrun,hummingboard/dl", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 8c1cb53464a0..4fa254347798 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -119,7 +119,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 0>; + phy-reset-gpios = <&gpio1 25 0>; phy-supply = <&vgen2_1v2_eth>; status = "okay"; }; @@ -339,6 +339,7 @@ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 22e6f8e657d2..822ffb231c57 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6q.dtsi" / { @@ -18,7 +19,6 @@ /* these are used by bootloader for disabling nodes */ aliases { - ethernet0 = &fec; ethernet1 = ð1; i2c0 = &i2c1; i2c1 = &i2c2; @@ -26,12 +26,10 @@ led0 = &led0; led1 = &led1; led2 = &led2; - sky2 = ð1; ssi0 = &ssi1; spi0 = &ecspi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -40,23 +38,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */ + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */ default-state = "off"; }; }; @@ -67,7 +67,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 5 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -109,7 +111,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -137,7 +139,7 @@ &ecspi1 { fsl,spi-num-chipselects = <1>; - cs-gpios = <&gpio3 19 0>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; @@ -153,7 +155,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -199,11 +201,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -314,16 +311,6 @@ }; }; }; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pciclkgen: si52147@6b { - compatible = "sil,si52147"; - reg = <0x6b>; - }; }; &i2c3 { @@ -345,51 +332,73 @@ VDDIO-supply = <®_3p3v>; }; - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - touchscreen: egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; +}; - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; - }; +&ldb { + status = "okay"; +}; + +&pcie { + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; }; }; -&iomuxc { +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; +&iomuxc { imx6q-gw5400-a { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ - MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ - >; - }; pinctrl_audmux: audmuxgrp { fsl,pins = < @@ -397,6 +406,7 @@ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -405,6 +415,7 @@ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */ >; }; @@ -429,6 +440,14 @@ >; }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */ + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 @@ -450,6 +469,19 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -474,6 +506,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ >; }; @@ -489,59 +522,3 @@ }; }; }; - -&ldb { - status = "okay"; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; -}; - -&ssi1 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6q-gw552x.dts b/arch/arm/boot/dts/imx6q-gw552x.dts new file mode 100644 index 000000000000..f87a8fa6e04d --- /dev/null +++ b/arch/arm/boot/dts/imx6q-gw552x.dts @@ -0,0 +1,24 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-gw552x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Dual/Quad GW552X"; + compatible = "gw,imx6q-gw552x", "gw,ventana", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts new file mode 100644 index 000000000000..c2bf8476ce45 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-hummingboard.dts @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-hummingboard.dtsi" + +/ { + model = "SolidRun HummingBoard Dual/Quad"; + compatible = "solidrun,hummingboard/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1025>; + fsl,transmit-boost-mdB = <3330>; + fsl,transmit-atten-16ths = <9>; + fsl,receive-eq-mdB = <3000>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index e8e781656b3f..6a524ca011e7 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -61,7 +61,7 @@ sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; + model = "Integrated SPDIF"; /* IMX6 doesn't implement this yet */ spdif-controller = <&spdif>; spdif-out; @@ -130,16 +130,23 @@ fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; + pinctrl_cubox_i_usbh1: cubox-i-usbh1 { + fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>; + }; + pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus { fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>; }; - pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id { + pinctrl_cubox_i_usbotg: cubox-i-usbotg { /* - * The Cubox-i pulls this low, but as it's pointless + * The Cubox-i pulls ID low, but as it's pointless * leaving it as a pull-up, even if it is just 10uA. */ - fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + >; }; pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { @@ -173,13 +180,15 @@ }; &usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbh1>; vbus-supply = <®_usbh1_vbus>; status = "okay"; }; &usbotg { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>; + pinctrl-0 = <&pinctrl_cubox_i_usbotg>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 0db15af41cb1..f2867c4b34a8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -9,11 +9,11 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - can0 = &can1; - ethernet0 = &fec; led0 = &led0; led1 = &led1; nand = &gpmi; @@ -27,17 +27,19 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; }; @@ -48,7 +50,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -81,7 +85,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -91,7 +95,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -143,11 +147,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -159,53 +158,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - - pmic: ltc3676@3c { - compatible = "lltc,ltc3676"; - reg = <0x3c>; - - regulators { - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; }; &i2c3 { @@ -213,31 +165,53 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; +}; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; + status = "okay"; }; -&iomuxc { +&uart1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; - imx6qdl-gw51xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - >; - }; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw51xx { pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 @@ -256,6 +230,14 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 >; }; @@ -301,6 +283,18 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -332,48 +326,8 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ >; }; }; }; - -&pcie { - reset-gpio = <&gpio1 0 0>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 234e7b755232..d3c0bf5c84e3 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -9,10 +9,11 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet0 = &fec; led0 = &led0; led1 = &led1; led2 = &led2; @@ -20,7 +21,6 @@ ssi0 = &ssi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -36,23 +36,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; @@ -63,7 +65,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -115,7 +119,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -141,11 +145,17 @@ status = "okay"; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -197,11 +207,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -213,65 +218,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pmic: ltc3676@3c { - compatible = "lltc,ltc3676"; - reg = <0x3c>; - - regulators { - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3_reg: ltc3676__ldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; }; &i2c3 { @@ -280,11 +226,6 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x13>; - }; - codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; @@ -297,49 +238,101 @@ compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; +}; + +&ldb { + status = "okay"; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; }; }; -&iomuxc { +&pcie { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; - imx6qdl-gw52xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */ - >; - }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; +&iomuxc { + imx6qdl-gw52xx { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -361,6 +354,23 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; @@ -406,6 +416,18 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 @@ -436,6 +458,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ >; }; @@ -447,85 +470,8 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ >; }; }; }; - -&ldb { - status = "okay"; - - lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 143f84f7812c..cade1bdc97e9 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -9,21 +9,19 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - can0 = &can1; - ethernet0 = &fec; ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; nand = &gpmi; - sky2 = ð1; ssi0 = &ssi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -39,23 +37,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; @@ -66,7 +66,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -118,7 +120,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -154,7 +156,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -206,11 +208,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -222,77 +219,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - - pciclkgen: si53156@6b { - compatible = "sil,si53156"; - reg = <0x6b>; - }; - - pciswitch: pex8606@3f { - compatible = "plx,pex8606"; - reg = <0x3f>; - }; - - pmic: ltc3676@3c { - compatible = "lltc,ltc3676"; - reg = <0x3c>; - - regulators { - /* VDD_SOC */ - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_1P8 */ - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_ARM */ - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_DDR */ - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_2P5 */ - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_1P8 */ - ldo3_reg: ltc3676__ldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_HIGH */ - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; }; &i2c3 { @@ -301,11 +227,6 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x1e>; - }; - codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; @@ -314,65 +235,110 @@ VDDIO-supply = <®_3p3v>; }; - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - touchscreen: egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; - interrupts = <11 2>; /* gpio1_11 active low */ - wakeup-gpios = <&gpio1 11 0>; + interrupts = <11 2>; + wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; +}; - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; +&ldb { + status = "okay"; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; }; +}; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; + + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; }; }; -&iomuxc { +&pwm4 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; - imx6qdl-gw53xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* PCIE6EXP_DIO0 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* PCIE6EXP_DIO1 */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_SHDN */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */ - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000 /* PMIC_IRQ# */ - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000 /* HUB_RST# */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIE_WDIS# */ - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* ACCEL_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x80000000 /* USBOTG_OC# */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_DET# */ - >; - }; +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw53xx { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -399,8 +365,17 @@ pinctrl_flexcan1: flexcan1grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; @@ -446,6 +421,19 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 @@ -476,6 +464,8 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ >; }; @@ -487,90 +477,8 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ >; }; }; }; - -&ldb { - status = "okay"; - - lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 16e7ad3d98ad..cf13239a1619 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -9,21 +9,19 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - can0 = &can1; - ethernet0 = &fec; ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; nand = &gpmi; - sky2 = ð1; ssi0 = &ssi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -39,23 +37,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; @@ -66,7 +66,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -108,7 +110,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -144,7 +146,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -196,11 +198,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -311,16 +308,6 @@ }; }; }; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pciclkgen: si52147@6b { - compatible = "sil,si52147"; - reg = <0x6b>; - }; }; &i2c3 { @@ -329,11 +316,6 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x1e>; - }; - codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; @@ -342,59 +324,115 @@ VDDIO-supply = <®_3p3v>; }; - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - touchscreen: egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; +}; - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; +&ldb { + status = "okay"; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; }; }; -&iomuxc { +&pwm4 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; - imx6qdl-gw54xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ - MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ - >; - }; +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; +&iomuxc { + imx6qdl-gw54xx { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -421,8 +459,17 @@ pinctrl_flexcan1: flexcan1grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; @@ -468,6 +515,19 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 @@ -498,6 +558,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ >; }; @@ -513,90 +574,3 @@ }; }; }; - -&ldb { - status = "okay"; - - lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&ssi2 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi new file mode 100644 index 000000000000..5c6587f6c420 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -0,0 +1,267 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + led0 = &led0; + led1 = &led1; + led2 = &led2; + nand = &gpmi; + usb0 = &usbh1; + usb1 = &usbotg; + }; + + chosen { + bootargs = "console=ttymxc1,115200"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ + default-state = "off"; + }; + + led2: user3 { + label = "user3"; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ + default-state = "off"; + }; + }; + + memory { + reg = <0x10000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_1p0v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + reg_3p3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; }; + +&usbh1 { + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw552x { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi new file mode 100644 index 000000000000..62841e85a91e --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2013,2014 Russell King + */ +#include "imx6qdl-microsom.dtsi" +#include "imx6qdl-microsom-ar8035.dtsi" + +/ { + chosen { + stdout-path = &uart1; + }; + + ir_recv: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio3 5 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: usb-h1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: usb-otg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "On-board SPDIF"; + /* IMX6 doesn't implement this yet */ + spdif-controller = <&spdif>; + spdif-out; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_i2c1>; + + /* + * Not fitted on Carrier-1 board... yet + status = "okay"; + + rtc: pcf8523@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + */ +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_i2c2>; + status = "okay"; +}; + +&iomuxc { + hummingboard { + pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { + fsl,pins = < + MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 + MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 + >; + }; + + pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 { + fsl,pins = < + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1 + >; + }; + + pinctrl_hummingboard_hdmi: hummingboard-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_hummingboard_i2c1: hummingboard-i2c1 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard_i2c2: hummingboard-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard_spdif: hummingboard-spdif { + fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; + }; + + pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { + fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; + }; + + pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { + /* + * Similar to pinctrl_usbotg_2, but we want it + * pulled down for a fixed host connection. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + + pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { + fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; + }; + + pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + >; + }; + + pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + >; + }; + }; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_spdif>; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + vbus-supply = <®_usbh1_vbus>; + status = "okay"; +}; + +&usbotg { + disable-over-current; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_hummingboard_usdhc2_aux + &pinctrl_hummingboard_usdhc2 + >; + vmmc-supply = <®_3p3v>; + cd-gpios = <&gpio1 4 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index d16066608e21..db9f45b2c573 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -17,7 +17,7 @@ enet { pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 { fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 /* AR8035 reset */ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 42ff525ebe13..08218120e770 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -174,6 +174,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -187,6 +192,25 @@ VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; + + rtc: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; }; &iomuxc { @@ -266,6 +290,20 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 2694aa84e187..0e50bb0a6b94 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -83,7 +83,7 @@ }; pmic@58 { - compatible = "dialog,da9063"; + compatible = "dlg,da9063"; reg = <0x58>; interrupt-parent = <&gpio4>; interrupts = <17 0x8>; /* active-low GPIO4_17 */ diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index ec43dde78525..baf2f00d519a 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -54,6 +54,19 @@ gpio = <&gpio4 10 0>; enable-active-high; }; + + reg_pcie: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 19 0>; + regulator-always-on; + enable-active-high; + }; }; gpio-keys { @@ -314,15 +327,15 @@ imx6qdl-sabresd { pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 - MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 >; }; @@ -367,9 +380,9 @@ pinctrl_gpio_keys: gpio_keysgrp { fsl,pins = < - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 >; }; @@ -396,7 +409,13 @@ pinctrl_pcie: pciegrp { fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 >; }; @@ -468,7 +487,7 @@ gpio_leds { pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index c701af958006..9596ed5867e6 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -137,7 +137,9 @@ pcie: pcie@0x01000000 { compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; - reg = <0x01ffc000 0x4000>; /* DBI */ + reg = <0x01ffc000 0x04000>, + <0x01f00000 0x80000>; + reg-names = "dbi", "config"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -273,11 +275,14 @@ }; ssi1: ssi@02028000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SSI1_IPG>; + clocks = <&clks IMX6QDL_CLK_SSI1_IPG>, + <&clks IMX6QDL_CLK_SSI1>; + clock-names = "ipg", "baud"; dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; dma-names = "rx", "tx"; @@ -286,11 +291,14 @@ }; ssi2: ssi@0202c000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SSI2_IPG>; + clocks = <&clks IMX6QDL_CLK_SSI2_IPG>, + <&clks IMX6QDL_CLK_SSI2>; + clock-names = "ipg", "baud"; dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; dma-names = "rx", "tx"; @@ -299,11 +307,14 @@ }; ssi3: ssi@02030000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SSI3_IPG>; + clocks = <&clks IMX6QDL_CLK_SSI3_IPG>, + <&clks IMX6QDL_CLK_SSI3>; + clock-names = "ipg", "baud"; dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; dma-names = "rx", "tx"; @@ -396,8 +407,9 @@ reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_GPT_IPG>, - <&clks IMX6QDL_CLK_GPT_IPG_PER>; - clock-names = "ipg", "per"; + <&clks IMX6QDL_CLK_GPT_IPG_PER>, + <&clks IMX6QDL_CLK_GPT_3M>; + clock-names = "ipg", "per", "osc_per"; }; gpio1: gpio@0209c000 { diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 3f9e041c0252..898d14fd765f 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -20,6 +20,13 @@ reg = <0x80000000 0x40000000>; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -74,6 +81,14 @@ regulator-max-microvolt = <4325000>; regulator-boot-on; }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio4 3 0>; + enable-active-high; + }; }; sound { @@ -329,12 +344,6 @@ >; }; - pinctrl_led: ledgrp { - fsl,pins = < - MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059 - >; - }; - pinctrl_kpp: kppgrp { fsl,pins = < MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010 @@ -346,6 +355,51 @@ >; }; + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0 + MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0 + MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0 + MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0 + MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0 + MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0 + MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0 + MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0 + MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0 + MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0 + MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0 + MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0 + MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0 + MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0 + MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0 + MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0 + MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0 + MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0 + MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0 + MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0 + MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0 + MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0 + MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0 + MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0 + MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0 + MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0 + MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0 + MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059 + >; + }; + + pinctrl_pwm1: pwmgrp { + fsl,pins = < + MX6SL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 @@ -488,6 +542,44 @@ status = "okay"; }; +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + &ssi2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index c75800ca8b35..dfd83e6d8087 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -226,11 +226,14 @@ }; ssi1: ssi@02028000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_SSI1>; + clocks = <&clks IMX6SL_CLK_SSI1_IPG>, + <&clks IMX6SL_CLK_SSI1>; + clock-names = "ipg", "baud"; dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; dma-names = "rx", "tx"; @@ -239,11 +242,14 @@ }; ssi2: ssi@0202c000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_SSI2>; + clocks = <&clks IMX6SL_CLK_SSI2_IPG>, + <&clks IMX6SL_CLK_SSI2>; + clock-names = "ipg", "baud"; dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; dma-names = "rx", "tx"; @@ -252,11 +258,14 @@ }; ssi3: ssi@02030000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_SSI3>; + clocks = <&clks IMX6SL_CLK_SSI3_IPG>, + <&clks IMX6SL_CLK_SSI3>; + clock-names = "ipg", "baud"; dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; dma-names = "rx", "tx"; @@ -529,6 +538,14 @@ }; }; + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; + }; + usbphy1: usbphy@020c9000 { compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; @@ -627,8 +644,14 @@ }; lcdif: lcdif@020f8000 { + compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif"; reg = <0x020f8000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_LCDIF_PIX>, + <&clks IMX6SL_CLK_LCDIF_AXI>, + <&clks IMX6SL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; }; dcp: dcp@020fc000 { @@ -784,7 +807,7 @@ }; ocotp: ocotp@021bc000 { - compatible = "fsl,imx6sl-ocotp"; + compatible = "fsl,imx6sl-ocotp", "syscon"; reg = <0x021bc000 0x4000>; }; diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h index 3e0b816dac08..bb9c6b78cb97 100644 --- a/arch/arm/boot/dts/imx6sx-pinfunc.h +++ b/arch/arm/boot/dts/imx6sx-pinfunc.h @@ -78,7 +78,7 @@ #define MX6SX_PAD_GPIO1_IO07__USDHC2_WP 0x0030 0x0378 0x0870 0x1 0x1 #define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO 0x0030 0x0378 0x0770 0x2 0x0 #define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK 0x0030 0x0378 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x082C 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7 0x0030 0x0378 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET 0x0030 0x0378 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT 0x0030 0x0378 0x0000 0x7 0x0 @@ -96,7 +96,7 @@ #define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B 0x0038 0x0380 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 0x0038 0x0380 0x0820 0x2 0x0 #define MX6SX_PAD_GPIO1_IO09__CCM_OUT0 0x0038 0x0380 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0834 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x0038 0x0380 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT 0x0038 0x0380 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 0x0038 0x0380 0x0000 0x7 0x0 @@ -213,7 +213,7 @@ #define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x0068 0x03B0 0x079C 0x1 0x1 #define MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x0068 0x03B0 0x07C4 0x2 0x2 #define MX6SX_PAD_CSI_DATA07__KPP_ROW_7 0x0068 0x03B0 0x07DC 0x3 0x0 -#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0854 0x4 0x1 +#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x0068 0x03B0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16 0x0068 0x03B0 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA07__DCIC1_OUT 0x0068 0x03B0 0x0000 0x7 0x0 @@ -254,7 +254,7 @@ #define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC 0x0078 0x03C0 0x0708 0x0 0x0 #define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x0078 0x03C0 0x07A4 0x1 0x1 #define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x0078 0x03C0 0x0674 0x2 0x1 -#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0844 0x3 0x3 +#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0000 0x3 0x0 #define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT 0x0078 0x03C0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25 0x0078 0x03C0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24 0x0078 0x03C0 0x0000 0x6 0x0 @@ -352,7 +352,7 @@ #define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00A0 0x03E8 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00A0 0x03E8 0x076C 0x1 0x1 #define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x00A0 0x03E8 0x07BC 0x2 0x1 -#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x082C 0x3 0x3 +#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x0000 0x3 0x0 #define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK 0x00A0 0x03E8 0x07E8 0x4 0x1 #define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x00A0 0x03E8 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR 0x00A0 0x03E8 0x0000 0x6 0x0 @@ -404,7 +404,7 @@ #define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK 0x00B4 0x03FC 0x0808 0x7 0x0 #define MX6SX_PAD_KEY_ROW0__KPP_ROW_0 0x00B8 0x0400 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW0__USDHC3_WP 0x00B8 0x0400 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0854 0x2 0x3 +#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x00B8 0x0400 0x0718 0x3 0x0 #define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x00B8 0x0400 0x0660 0x4 0x0 #define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x00B8 0x0400 0x0000 0x5 0x0 @@ -423,7 +423,7 @@ #define MX6SX_PAD_KEY_ROW1__M4_NMI 0x00BC 0x0404 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_ROW2__KPP_ROW_2 0x00C0 0x0408 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW2__USDHC4_WP 0x00C0 0x0408 0x0878 0x1 0x1 -#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x084C 0x2 0x3 +#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW2__CAN1_RX 0x00C0 0x0408 0x068C 0x3 0x1 #define MX6SX_PAD_KEY_ROW2__CANFD_RX1 0x00C0 0x0408 0x0694 0x4 0x1 #define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x00C0 0x0408 0x0000 0x5 0x0 @@ -815,7 +815,7 @@ #define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05 0x0164 0x04AC 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5 0x0164 0x04AC 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS 0x0164 0x04AC 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x083C 0x3 0x1 +#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x0000 0x3 0x0 #define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC 0x0164 0x04AC 0x064C 0x4 0x0 #define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0x0164 0x04AC 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA05__WEIM_AD_5 0x0164 0x04AC 0x0000 0x6 0x0 @@ -957,7 +957,7 @@ #define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 0x019C 0x04E4 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 0x019C 0x04E4 0x0000 0x9 0x0 #define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x01A0 0x04E8 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x083C 0x1 0x4 +#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x0000 0x1 0x0 #define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI 0x01A0 0x04E8 0x0738 0x2 0x1 #define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS 0x01A0 0x04E8 0x0778 0x3 0x2 #define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22 0x01A0 0x04E8 0x06F4 0x4 0x1 @@ -1236,7 +1236,7 @@ #define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x0230 0x0578 0x0670 0x1 0x1 #define MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x0230 0x0578 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2 0x0230 0x0578 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0834 0x4 0x2 +#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0000 0x4 0x0 #define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 0x0230 0x0578 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY 0x0230 0x0578 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA2__CCM_OUT0 0x0230 0x0578 0x0000 0x7 0x0 @@ -1315,7 +1315,7 @@ #define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 0x024C 0x0594 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31 0x024C 0x0594 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x0250 0x0598 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0844 0x1 0x0 +#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x0250 0x0598 0x0740 0x2 0x0 #define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS 0x0250 0x0598 0x0680 0x3 0x0 #define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC 0x0250 0x0598 0x0000 0x4 0x0 @@ -1409,7 +1409,7 @@ #define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x0274 0x05BC 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA7__CAN1_RX 0x0274 0x05BC 0x068C 0x1 0x0 #define MX6SX_PAD_SD3_DATA7__CANFD_RX1 0x0274 0x05BC 0x0694 0x2 0x0 -#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x083C 0x3 0x3 +#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x0000 0x3 0x0 #define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5 0x0274 0x05BC 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9 0x0274 0x05BC 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN 0x0274 0x05BC 0x0000 0x6 0x0 @@ -1510,7 +1510,7 @@ #define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 0x0298 0x05E0 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x029C 0x05E4 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08 0x029C 0x05E4 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x084C 0x2 0x1 +#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x0000 0x2 0x0 #define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0 0x029C 0x05E4 0x073C 0x3 0x0 #define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15 0x029C 0x05E4 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x029C 0x05E4 0x0000 0x5 0x0 diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index a3980d970590..82d6b34527b7 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -24,6 +24,13 @@ reg = <0x80000000 0x40000000>; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -90,6 +97,14 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio3 27 0>; + enable-active-high; + }; }; sound { @@ -251,6 +266,44 @@ }; }; +&lcdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + &ssi2 { status = "okay"; }; @@ -365,6 +418,46 @@ >; }; + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 + MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 + MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 + MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 + MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 + MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 + MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 + MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 + MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 + MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 + MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 + MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 + MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 + MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 + MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 + MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 + MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 + MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 + MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 + MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 + MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 + MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 + MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 + MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 + MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 + MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 + MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp-1 { + fsl,pins = < + MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 + >; + }; + pinctrl_vcc_sd3: vccsd3grp { fsl,pins = < MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index f4b9da65bc0f..888dd767a0b3 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -298,6 +298,7 @@ }; ssi1: ssi@02028000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; @@ -311,6 +312,7 @@ }; ssi2: ssi@0202c000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; @@ -324,6 +326,7 @@ }; ssi3: ssi@02030000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; @@ -418,7 +421,7 @@ reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_GPT_BUS>, - <&clks IMX6SX_CLK_GPT_SERIAL>; + <&clks IMX6SX_CLK_GPT_3M>; clock-names = "ipg", "per"; }; @@ -1062,6 +1065,7 @@ }; lcdif1: lcdif@02220000 { + compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02220000 0x4000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, @@ -1072,6 +1076,7 @@ }; lcdif2: lcdif@02224000 { + compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02224000 0x4000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>, diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi new file mode 100644 index 000000000000..55feb14a333d --- /dev/null +++ b/arch/arm/boot/dts/meson.dtsi @@ -0,0 +1,105 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + gic: interrupt-controller@c4301000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xc4301000 0x1000>, + <0xc4300100 0x0100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer@c1109940 { + compatible = "amlogic,meson6-timer"; + reg = <0xc1109940 0x14>; + interrupts = <0 10 1>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + uart_AO: serial@c81004c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81004c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_A: serial@c81084c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81084c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_B: serial@c81084dc { + compatible = "amlogic,meson-uart"; + reg = <0xc81084dc 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_C: serial@c8108700 { + compatible = "amlogic,meson-uart"; + reg = <0xc8108700 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + }; +}; /* end of / */ diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts new file mode 100644 index 000000000000..dc2541faf1ec --- /dev/null +++ b/arch/arm/boot/dts/meson6-atv1200.dts @@ -0,0 +1,66 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "meson6.dtsi" + +/ { + model = "Geniatech ATV1200"; + compatible = "geniatech,atv1200"; + + aliases { + serial0 = &uart_AO; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; +}; + +&uart_AO { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi new file mode 100644 index 000000000000..4ba49127779f --- /dev/null +++ b/arch/arm/boot/dts/meson6.dtsi @@ -0,0 +1,78 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "meson.dtsi" + +/ { + model = "Amlogic Meson6 SoC"; + compatible = "amlogic,meson6"; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x200>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x201>; + }; + }; + + clk81: clk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; +}; /* end of / */ diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts index 443b4467de15..0da047013120 100644 --- a/arch/arm/boot/dts/mt6589-aquaris5.dts +++ b/arch/arm/boot/dts/mt6589-aquaris5.dts @@ -18,6 +18,11 @@ / { model = "bq Aquaris5"; + compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; + + chosen { + bootargs = "earlyprintk"; + }; memory { reg = <0x80000000 0x40000000>; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index d0297a051549..e3c7600ddb38 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -81,8 +81,8 @@ clock-names = "system-clk", "rtc-clk"; }; - gic: interrupt-controller@10212000 { - compatible = "arm,cortex-a15-gic"; + gic: interrupt-controller@10211000 { + compatible = "arm,cortex-a7-gic"; interrupt-controller; #interrupt-cells = <3>; reg = <0x10211000 0x1000>, diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 9be3c1266378..ae89aad01595 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -159,6 +159,14 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <6>; + mbox_dsp: dsp { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_iva: iva { + ti,mbox-tx = <2 1 3>; + ti,mbox-rx = <3 1 3>; + }; }; timer1: timer@48028000 { diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 1a00f15d9096..b56d71611026 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -249,6 +249,10 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <6>; + mbox_dsp: dsp { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; }; timer1: timer@49018000 { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 3c3e6da1deac..a9aae88b74f5 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -292,6 +292,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; }; &gpio1 { diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dtsi index 021311f7964b..fd34f913ace3 100644 --- a/arch/arm/boot/dts/omap3-gta04.dts +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -26,6 +26,10 @@ reg = <0x80000000 0x20000000>; /* 512 MB */ }; + aliases { + display0 = &lcd; + }; + gpio-keys { compatible = "gpio-keys"; @@ -74,9 +78,30 @@ }; }; }; + + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + }; }; &omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_pins + >; + + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ @@ -141,12 +166,31 @@ 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ >; }; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_2_pins + >; + + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; spi_gpio_pins: spi_gpio_pinmux { - pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */ - 0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */ - 0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */ - 0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */ + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */ + OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */ + OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */ + OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */ >; }; }; @@ -196,6 +240,9 @@ #size-cells = <0>; reg = <0x45>; + gpio-controller; + #gpio-cells = <2>; + gta04_led0: red_aux@0 { label = "gta04:red:aux"; reg = <0x0>; @@ -216,11 +263,16 @@ label = "gta04:green:power"; reg = <0x4>; }; + + wifi_reset: wifi_reset@6 { + reg = <0x6>; + compatible = "gpio"; + }; }; /* compass aka magnetometer */ hmc5843@1e { - compatible = "honeywell,hmc5843"; + compatible = "honeywell,hmc5883l"; reg = <0x1e>; }; @@ -248,6 +300,14 @@ power = <50>; }; +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; @@ -286,11 +346,37 @@ bb_uamp = <150>; }; +/* spare */ +&vaux1 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; +}; + +/* sensors */ +&vaux2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; +}; + +/* camera */ +&vaux3 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; +}; + +/* WLAN/BT */ &vaux4 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3150000>; }; +/* GPS LNA */ +&vsim { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; +}; + /* Needed to power the DPI pins */ &vpll2 { regulator-always-on; @@ -309,3 +395,57 @@ }; }; }; + +&gpmc { + ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */ + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,device-width = <2>; + + #address-cells = <1>; + #size-cells = <1>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "File System"; + reg = <0x680000 0xf980000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-gta04a3.dts b/arch/arm/boot/dts/omap3-gta04a3.dts new file mode 100644 index 000000000000..3099a892cf50 --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04a3.dts @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-gta04.dtsi" + +/ { + model = "Goldelico GTA04A3"; +}; + +&i2c2 { + + /* alternate accelerometer that might be installed on some GTA04A3 boards */ + lis302@1d { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x1d>; + interrupt-parent = <&gpio3>; + interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; + Vdd-supply = <&vaux2>; + Vdd_IO-supply = <&vaux2>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <8>; + st,click-thresh-y = <8>; + st,click-thresh-z = <10>; + st,click-click-time-limit = <9>; + st,click-latency = <50>; + st,irq1-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <32>; + st,min-limit-y = <3>; + st,min-limit-z = <3>; + st,max-limit-x = <3>; + st,max-limit-y = <32>; + st,max-limit-z = <32>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-gta04a4.dts b/arch/arm/boot/dts/omap3-gta04a4.dts new file mode 100644 index 000000000000..c918bb1f0529 --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04a4.dts @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2014 Marek Belisko <marek@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-gta04.dtsi" + +/ { + model = "Goldelico GTA04A4"; +}; diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts new file mode 100644 index 000000000000..52b386f6865b --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04a5.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-gta04.dtsi" + +/ { + model = "Goldelico GTA04A5"; + + sound { + ti,jack-det-gpio = <&twl_gpio 2 0>; /* GTA04A5 only */ + }; +}; diff --git a/arch/arm/boot/dts/omap3-ha-common.dtsi b/arch/arm/boot/dts/omap3-ha-common.dtsi new file mode 100644 index 000000000000..bd66545ef954 --- /dev/null +++ b/arch/arm/boot/dts/omap3-ha-common.dtsi @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-tao3530.dtsi" + +/ { + gpio_poweroff { + pinctrl-names = "default"; + pinctrl-0 = <&poweroff_pins>; + + compatible = "gpio-poweroff"; + gpios = <&gpio6 8 GPIO_ACTIVE_LOW>; /* GPIO 168 */ + }; +}; + +&omap3_pmx_core { + sound2_pins: pinmux_sound2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4) /* gpmc_d8 gpio_44 */ + >; + }; + + led_blue_pins: pinmux_led_blue_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4) /* cam_xclka gpio_96, LED blue */ + >; + }; + + led_green_pins: pinmux_led_green_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4) /* cam_d8 gpio_107, LED green */ + >; + }; + + led_red_pins: pinmux_led_red_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* cam_xclkb gpio_111, LED red */ + >; + }; + + poweroff_pins: pinmux_poweroff_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4) /* i2c2_scl gpio_168 */ + >; + }; + + powerdown_input_pins: pinmux_powerdown_input_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4) /* i2c2_sda gpio_183 */ + >; + }; + + fpga_boot0_pins: fpga_boot0_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2 gpio_101 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4) /* cam_d3 gpio_102 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE4) /* cam_d4 gpio_103 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d5 gpio_104 */ + >; + }; + + fpga_boot1_pins: fpga_boot1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4) /* gpmc_d10 gpio_46 */ + OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4) /* gpmc_d11 gpio_47 */ + OMAP3_CORE1_IOPAD(0x20a6, PIN_OUTPUT | MUX_MODE4) /* gpmc_d12 gpio_48 */ + OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_d13 gpio_49 */ + >; + }; +}; + +/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */ +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts new file mode 100644 index 000000000000..11aa28d73f3a --- /dev/null +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-ha-common.dtsi" + +/ { + model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM"; + compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb2_pins + &powerdown_input_pins + &fpga_boot0_pins + &fpga_boot1_pins + &led_blue_pins + &led_green_pins + &led_red_pins + &touchscreen_wake_pins + >; + + touchscreen_irq_pins: pinmux_touchscreen_irq_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio_136, Touchscreen IRQ */ + >; + }; + + touchscreen_wake_pins: pinmux_touchscreen_wake_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x212c, PIN_OUTPUT_PULLUP | MUX_MODE4) /* gpio_110, Touchscreen Wake */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + lte430_pins: pinmux_lte430_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ + >; + }; +}; + +/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */ +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + lcd0: display@0 { + compatible = "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <<e430_pins>; + enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <31250000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <86>; + hsync-len = <1>; + vback-porch = <30>; + vfront-porch = <13>; + vsync-len = <3>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + backlight { + compatible = "gpio-backlight"; + + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 */ + + default-on; + }; +}; diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts new file mode 100644 index 000000000000..fde325688fb9 --- /dev/null +++ b/arch/arm/boot/dts/omap3-ha.dts @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-ha-common.dtsi" + +/ { + model = "TI OMAP3 HEAD acoustics baseboard with TAO3530 SOM"; + compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb2_pins + &powerdown_input_pins + &fpga_boot0_pins + &fpga_boot1_pins + &led_blue_pins + &led_green_pins + &led_red_pins + >; +}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index b15f1a77d684..1fe45d1f75ec 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -353,7 +353,7 @@ }; twl_power: power { - compatible = "ti,twl4030-power-n900"; + compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; ti,use_poweroff; }; }; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi new file mode 100644 index 000000000000..b30f387d3a83 --- /dev/null +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -0,0 +1,337 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap34xx-hs.dtsi" + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + startup-delay-us = <70000>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */ + vcc-supply = <&hsusb2_power>; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + /* McBSP2 is used for onboard sound, same as on beagle */ + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; + + /* Regulator to enable/switch the vcc of the Wifi module */ + mmc2_sdio_poweron: regulator-mmc2-sdio-poweron { + compatible = "regulator-fixed"; + regulator-name = "regulator-mmc2-sdio-poweron"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + gpio = <&gpio5 29 GPIO_ACTIVE_LOW>; /* gpio_157 */ + enable-active-low; + startup-delay-us = <10000>; + }; +}; + +&omap3_pmx_core { + hsusbb2_pins: pinmux_hsusbb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3_CORE1_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3_CORE1_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3_CORE1_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3_CORE1_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3_CORE1_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ + OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ + OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ + OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + >; + }; + + /* wlan GPIO output for WLAN_EN */ + wlan_gpio: pinmux_wlan_gpio { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr gpio_157 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl.i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.i2c3_sda */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + mcspi3_pins: pinmux_mcspi3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x25dc, PIN_OUTPUT | MUX_MODE1) /* etk_d0.mcspi3_simo gpio14 INPUT | MODE1 */ + OMAP3_CORE1_IOPAD(0x25de, PIN_INPUT_PULLUP | MUX_MODE1) /* etk_d1.mcspi3_somi gpio15 INPUT | MODE1 */ + OMAP3_CORE1_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE1) /* etk_d2.mcspi3_cs0 gpio16 INPUT | MODE1 */ + OMAP3_CORE1_IOPAD(0x25e2, PIN_INPUT | MUX_MODE1) /* etk_d3.mcspi3_clk gpio17 INPUT | MODE1 */ + >; + }; + + mcbsp3_pins: pinmux_mcbsp3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.uart2_cts */ + OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dr.uart2_rts */ + OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clk.uart2_tx */ + OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_fsx.uart2_rx */ + >; + }; +}; + +/* McBSP1: mux'ed with GPIO158 as clock for HA-DSP */ +&mcbsp1 { + status = "disabled"; +}; + +&mcbsp2 { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + + spidev@0 { + compatible = "spidev"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpha; + }; +}; + +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi3_pins>; + + spidev@0 { + compatible = "spidev"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpha; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + cd-gpios = <&twl_gpio 0 0>; + bus-width = <8>; +}; + +// WiFi (Marvell 88W8686) on MMC2/SDIO +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&mmc2_sdio_poweron>; + non-removable; + bus-width = <4>; + cap-power-off-card; +}; + +&mmc3 { + status = "disabled"; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&mcbsp3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp3_pins>; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x01000000>; + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <16>; + gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ + ti,nand-ecc-opt = "sw"; + + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <36>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <24>; + gpmc,adv-wr-off-ns = <36>; + gpmc,oe-on-ns = <6>; + gpmc,oe-off-ns = <48>; + gpmc,we-on-ns = <6>; + gpmc,we-off-ns = <30>; + gpmc,rd-cycle-ns = <72>; + gpmc,wr-cycle-ns = <72>; + gpmc,access-ns = <54>; + gpmc,wr-access-ns = <30>; + + #address-cells = <1>; + #size-cells = <1>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "File System"; + reg = <0x680000 0xf980000>; + }; + }; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&vaux2 { + regulator-name = "vdd_ehci"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts new file mode 100644 index 000000000000..d659515ab9b8 --- /dev/null +++ b/arch/arm/boot/dts/omap3-thunder.dts @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-tao3530.dtsi" + +/ { + model = "TI OMAP3 Thunder baseboard with TAO3530 SOM"; + compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; +}; + +&omap3_pmx_core { + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + lte430_pins: pinmux_lte430_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ + >; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + lcd0: display@0 { + compatible = "samsung,lte430wq-f0c", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <<e430_pins>; + enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <2>; + vfront-porch = <3>; + vsync-len = <11>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + backlight { + compatible = "gpio-backlight"; + + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 */ + + default-on; + }; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 575a49bf968d..b2ae8b8e54d6 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -334,6 +334,10 @@ interrupts = <26>; ti,mbox-num-users = <2>; ti,mbox-num-fifos = <2>; + mbox_dsp: dsp { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; }; mcspi1: spi@48098000 { diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 02f69f4a8fd3..9bad94efe1c8 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -107,7 +107,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <1 0 0x08000000>; - ti,nand-ecc-opt = "ham1"; + ti,nand-ecc-opt = "sw"; nand-bus-width = <8>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <36>; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 69408b53200d..bc54d669f36d 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -656,6 +656,14 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; }; timer1: timer@4a318000 { diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/omap5-sbc-t54.dts index aa98fea3f2b3..8e89793e0f6b 100644 --- a/arch/arm/boot/dts/omap5-sbc-t54.dts +++ b/arch/arm/boot/dts/omap5-sbc-t54.dts @@ -1,11 +1,11 @@ /* - * Suppport for CompuLab SBC-T54 with CM-T54 + * Suppport for CompuLab CM-T54 on SB-T54 baseboard */ #include "omap5-cm-t54.dts" / { - model = "CompuLab SBC-T54 with CM-T54"; + model = "CompuLab CM-T54 on SB-T54"; compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5"; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index fc8df1739f39..30ce71add4ef 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -187,18 +187,22 @@ }; omap5_pmx_core: pinmux@4a002840 { - compatible = "ti,omap4-padconf", "pinctrl-single"; + compatible = "ti,omap5-padconf", "pinctrl-single"; reg = <0x4a002840 0x01b6>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0x7fff>; }; omap5_pmx_wkup: pinmux@4ae0c840 { - compatible = "ti,omap4-padconf", "pinctrl-single"; + compatible = "ti,omap5-padconf", "pinctrl-single"; reg = <0x4ae0c840 0x0038>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0x7fff>; }; @@ -447,7 +451,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; @@ -455,7 +459,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -463,7 +467,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -471,7 +475,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; @@ -479,7 +483,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; clock-frequency = <48000000>; }; @@ -487,7 +491,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; clock-frequency = <48000000>; }; @@ -642,6 +646,14 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; }; timer1: timer@4ae18000 { @@ -945,6 +957,15 @@ clock-names = "fck"; }; + rfbi: encoder@58002000 { + compatible = "ti,omap5-rfbi"; + reg = <0x58002000 0x100>; + status = "disabled"; + ti,hwmods = "dss_rfbi"; + clocks = <&dss_dss_clk>, <&l3_iclk_div>; + clock-names = "fck", "ick"; + }; + dsi1: encoder@58004000 { compatible = "ti,omap5-dsi"; reg = <0x58004000 0x200>, diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index e67a23b5d788..58c27466f012 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -367,10 +367,12 @@ l3_iclk_div: l3_iclk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <4>; + reg = <0x100>; clocks = <&dpll_core_h12x2_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; gpu_l3_iclk: gpu_l3_iclk { @@ -383,10 +385,12 @@ l4_root_clk_div: l4_root_clk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <8>; + reg = <0x100>; clocks = <&l3_iclk_div>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; slimbus1_slimbus_clk: slimbus1_slimbus_clk { diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index a5e90f078aa9..c08f84629aa9 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -113,14 +113,14 @@ }; usb0: ohci@4c000000 { - compatible = "mrvl,pxa-ohci"; + compatible = "marvell,pxa-ohci"; reg = <0x4c000000 0x10000>; interrupts = <3>; status = "disabled"; }; mmc0: mmc@41100000 { - compatible = "mrvl,pxa-mmc"; + compatible = "marvell,pxa-mmc"; reg = <0x41100000 0x1000>; interrupts = <23>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 7c2441d526bc..b396c8311b27 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -5,6 +5,33 @@ compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; soc { + pinctrl@800000 { + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + }; + }; + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + + i2c@12460000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom: eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; + }; + }; + gsbi@16600000 { status = "ok"; qcom,mode = <GSBI_PROT_I2C_UART>; @@ -12,5 +39,21 @@ status = "ok"; }; }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + /* WLAN */ + sdcc4: sdcc@121c0000 { + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 92bf793622c3..b3154c071652 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -2,7 +2,9 @@ #include "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/clock/qcom,mmcc-msm8960.h> #include <dt-bindings/soc/qcom,gsbi.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { model = "Qualcomm APQ8064"; @@ -70,6 +72,34 @@ ranges; compatible = "simple-bus"; + tlmm_pinmux: pinctrl@800000 { + compatible = "qcom,apq8064-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&ps_hold>; + + sdc4_gpios: sdc4-gpios { + pios { + pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; + function = "sdc4"; + }; + }; + + ps_hold: ps_hold { + mux { + pins = "gpio78"; + function = "ps_hold"; + }; + }; + }; + intc: interrupt-controller@2000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -133,6 +163,48 @@ regulator; }; + gsbi1: gsbi@12440000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12440000 0x100>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c1: i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + interrupts = <0 194 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi2: gsbi@12480000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12480000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c2: i2c@124a0000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x124a0000 0x1000>; + interrupts = <0 196 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; @@ -166,5 +238,116 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + mmcc: clock-controller@4000000 { + compatible = "qcom,mmcc-apq8064"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + sdcc1bam:dma@12402000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x8000>; + interrupts = <0 98 0>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc3bam:dma@12182000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = <0 96 0>; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc4bam:dma@121c2000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x121c2000 0x8000>; + interrupts = <0 95 0>; + clocks = <&gcc SDC4_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc4: sdcc@121c0000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x121c0000 0x2000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + vmmc-supply = <&vsdcc_fixed>; + vqmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc4bam 2>, <&sdcc4bam 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&sdc4_gpios>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index b4dfb01fe6fb..47370494d0f8 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -22,6 +22,13 @@ pinctrl@fd510000 { + i2c11_pins: i2c11 { + mux { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + }; + }; + spi8_default: spi8_default { mosi { pins = "gpio45"; @@ -41,5 +48,19 @@ }; }; }; + + i2c@f9967000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c11_pins>; + pinctrl-names = "default"; + + eeprom: eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + read-only; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts new file mode 100644 index 000000000000..c9ff10821ad9 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts @@ -0,0 +1,23 @@ +#include "qcom-apq8084.dtsi" + +/ { + model = "Qualcomm APQ8084/IFC6540"; + compatible = "qcom,apq8084-ifc6540", "qcom,apq8084"; + + soc { + serial@f995e000 { + status = "okay"; + }; + + sdhci@f9824900 { + bus-width = <8>; + non-removable; + status = "okay"; + }; + + sdhci@f98a4900 { + cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>; + bus-width = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts index 9dae3878b71d..8ecec58a9ff6 100644 --- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts +++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts @@ -3,4 +3,10 @@ / { model = "Qualcomm APQ 8084-MTP"; compatible = "qcom,apq8084-mtp", "qcom,apq8084"; + + soc { + serial@f995e000 { + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index e3e009a5912b..1f130bc16858 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -2,6 +2,9 @@ #include "skeleton.dtsi" +#include <dt-bindings/clock/qcom,gcc-apq8084.h> +#include <dt-bindings/gpio/gpio.h> + / { model = "Qualcomm APQ 8084"; compatible = "qcom,apq8084"; @@ -175,5 +178,53 @@ compatible = "qcom,pshold"; reg = <0xfc4ab000 0x4>; }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-apq8084"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0xfc400000 0x4000>; + }; + + tlmm: pinctrl@fd510000 { + compatible = "qcom,apq8084-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 208 0>; + }; + + serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupts = <0 114 0x0>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 123 0>, <0 138 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f98a4900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 125 0>, <0 221 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts new file mode 100644 index 000000000000..95e64955fb8e --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -0,0 +1,85 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +/ { + model = "Qualcomm IPQ8064/AP148"; + compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + soc { + pinmux@800000 { + i2c4_pins: i2c4_pinmux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + bias-disable; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "ok"; + serial@16340000 { + status = "ok"; + }; + + i2c4: i2c@16380000 { + status = "ok"; + + clock-frequency = <200000>; + + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "ok"; + + spi4: spi@1a280000 { + status = "ok"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: m25p80@0 { + compatible = "s25fl256s1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "rootfs"; + reg = <0x0 0x1000000>; + }; + + partition@1 { + label = "scratch"; + reg = <0x1000000 0x1000000>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi new file mode 100644 index 000000000000..7093b075e408 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi @@ -0,0 +1 @@ +#include "qcom-ipq8064.dtsi" diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi new file mode 100644 index 000000000000..244f857f0e6f --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -0,0 +1,250 @@ +/dts-v1/; + +#include "skeleton.dtsi" +#include <dt-bindings/clock/qcom,gcc-ipq806x.h> +#include <dt-bindings/soc/qcom,gsbi.h> + +/ { + model = "Qualcomm IPQ8064"; + compatible = "qcom,ipq8064"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + }; + + cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <1 10 0x304>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + nss@40000000 { + reg = <0x40000000 0x1000000>; + no-map; + }; + + smem@41000000 { + reg = <0x41000000 0x200000>; + no-map; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + qcom_pinmux: pinmux@800000 { + compatible = "qcom,ipq8064-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 32 0x4>; + }; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <25000000>, + <32768>; + cpu-offset = <0x80000>; + }; + + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + }; + + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + }; + + saw0: regulator@2089000 { + compatible = "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw1: regulator@2099000 { + compatible = "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + gsbi2: gsbi@12480000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12480000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + serial@12490000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12490000 0x1000>, + <0x12480000 0x1000>; + interrupts = <0 195 0x0>; + clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@124a0000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x124a0000 0x1000>; + interrupts = <0 196 0>; + + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + }; + + gsbi4: gsbi@16300000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16300000 0x100>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x1000>, + <0x16300000 0x1000>; + interrupts = <0 152 0x0>; + clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@16380000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16380000 0x1000>; + interrupts = <0 153 0>; + + clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi5: gsbi@1a200000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x1a200000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + serial@1a240000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a240000 0x1000>, + <0x1a200000 0x1000>; + interrupts = <0 154 0x0>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@1a280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <0 155 0>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + spi@1a280000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <0 155 0>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x00500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-ipq8064"; + reg = <0x00900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 45180adfadf1..e0883c376248 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -1,3 +1,5 @@ +#include <dt-bindings/input/input.h> + #include "qcom-msm8660.dtsi" / { @@ -12,5 +14,45 @@ status = "ok"; }; }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + }; + }; +}; + +&pmicintc { + keypad@148 { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_FN_F1) + MATRIX_KEY(0, 1, KEY_UP) + MATRIX_KEY(0, 2, KEY_LEFT) + MATRIX_KEY(0, 3, KEY_VOLUMEUP) + MATRIX_KEY(1, 0, KEY_FN_F2) + MATRIX_KEY(1, 1, KEY_RIGHT) + MATRIX_KEY(1, 2, KEY_DOWN) + MATRIX_KEY(1, 3, KEY_VOLUMEDOWN) + MATRIX_KEY(2, 3, KEY_ENTER) + MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS) + MATRIX_KEY(4, 1, KEY_UP) + MATRIX_KEY(4, 2, KEY_LEFT) + MATRIX_KEY(4, 3, KEY_HOME) + MATRIX_KEY(4, 4, KEY_FN_F3) + MATRIX_KEY(5, 0, KEY_CAMERA) + MATRIX_KEY(5, 1, KEY_RIGHT) + MATRIX_KEY(5, 2, KEY_DOWN) + MATRIX_KEY(5, 3, KEY_BACK) + MATRIX_KEY(5, 4, KEY_MENU) + >; + keypad,num-rows = <6>; + keypad,num-columns = <5>; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 53837aaa2f72..0affd6193f56 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8660.h> #include <dt-bindings/soc/qcom,gsbi.h> @@ -103,6 +104,98 @@ compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; + + pmicintc: pmic@0 { + compatible = "qcom,pm8058"; + interrupt-parent = <&msmgpio>; + interrupts = <88 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8058-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicintc>; + interrupts = <50 1>, <51 1>; + debounce = <15625>; + pull-up; + }; + + keypad@148 { + compatible = "qcom,pm8058-keypad"; + reg = <0x148>; + interrupt-parent = <&pmicintc>; + interrupts = <74 1>, <75 1>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + + rtc@11d { + compatible = "qcom,pm8058-rtc"; + interrupt-parent = <&pmicintc>; + interrupts = <39 1>; + reg = <0x11d>; + allow-set-time; + }; + + vibrator@4a { + compatible = "qcom,pm8058-vib"; + reg = <0x4a>; + }; + }; + }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x8000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + }; }; }; + }; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 8f75cc4c8340..7f70fae90959 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -1,3 +1,5 @@ +#include <dt-bindings/input/input.h> + #include "qcom-msm8960.dtsi" / { @@ -12,5 +14,30 @@ status = "ok"; }; }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + }; + }; +}; + +&pmicintc { + keypad@148 { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_VOLUMEUP) + MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) + MATRIX_KEY(0, 3, KEY_CAMERA) + >; + keypad,num-rows = <1>; + keypad,num-columns = <5>; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 5303e53e34dc..e1b0d5cd9e3c 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8960.h> #include <dt-bindings/soc/qcom,gsbi.h> @@ -143,6 +144,43 @@ compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; + + pmicintc: pmic@0 { + compatible = "qcom,pm8921"; + interrupt-parent = <&msmgpio>; + interrupts = <104 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicintc>; + interrupts = <50 1>, <51 1>; + debounce = <15625>; + pull-up; + }; + + keypad@148 { + compatible = "qcom,pm8921-keypad"; + reg = <0x148>; + interrupt-parent = <&pmicintc>; + interrupts = <74 1>, <75 1>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + + rtc@11d { + compatible = "qcom,pm8921-rtc"; + interrupt-parent = <&pmicintc>; + interrupts = <39 1>; + reg = <0x11d>; + allow-set-time; + }; + }; }; rng@1a500000 { @@ -151,5 +189,54 @@ clocks = <&gcc PRNG_CLK>; clock-names = "core"; }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x8000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 69dca2aca25a..e265ec16a787 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1,8 +1,8 @@ /dts-v1/; -#include "skeleton.dtsi" - +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> +#include "skeleton.dtsi" / { model = "Qualcomm MSM8974"; @@ -236,5 +236,16 @@ #interrupt-cells = <2>; interrupts = <0 208 0>; }; + + blsp_i2c11: i2c@f9967000 { + status = "disable"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9967000 0x1000>; + interrupts = <0 105 IRQ_TYPE_NONE>; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index d8ec5058c351..ef152e384822 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -51,7 +51,7 @@ }; irqc0: interrupt-controller@e61c0000 { - compatible = "renesas,irqc"; + compatible = "renesas,irqc-r8a73a4", "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; @@ -90,7 +90,7 @@ }; irqc1: interrupt-controller@e61c0200 { - compatible = "renesas,irqc"; + compatible = "renesas,irqc-r8a73a4", "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0200 0 0x200>; @@ -165,7 +165,7 @@ }; thermal@e61f0000 { - compatible = "renesas,rcar-thermal"; + compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 58d0d952d60e..05b68f427c50 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -199,7 +199,6 @@ scif0: serial@ffe40000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe40000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -209,7 +208,6 @@ scif1: serial@ffe41000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe41000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -219,7 +217,6 @@ scif2: serial@ffe42000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe42000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -229,7 +226,6 @@ scif3: serial@ffe43000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe43000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -239,7 +235,6 @@ scif4: serial@ffe44000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe44000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -249,7 +244,6 @@ scif5: serial@ffe45000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe45000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -262,7 +256,7 @@ }; thermal@ffc48000 { - compatible = "renesas,rcar-thermal"; + compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; reg = <0xffc48000 0x38>; }; @@ -404,10 +398,10 @@ /* Gate clocks */ mstp0_clks: clocks@ffc80030 { compatible = "renesas,r8a7779-mstp-clocks", - "renesas,cpg-mstp-clocks"; + "renesas,cpg-mstp-clocks"; reg = <0xffc80030 4>; clocks = <&cpg_clocks R8A7779_CLK_S>, - <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_S>, @@ -441,7 +435,7 @@ }; mstp1_clks: clocks@ffc80034 { compatible = "renesas,r8a7779-mstp-clocks", - "renesas,cpg-mstp-clocks"; + "renesas,cpg-mstp-clocks"; reg = <0xffc80034 4>, <0xffc80044 4>; clocks = <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, @@ -470,7 +464,7 @@ }; mstp3_clks: clocks@ffc8003c { compatible = "renesas,r8a7779-mstp-clocks", - "renesas,cpg-mstp-clocks"; + "renesas,cpg-mstp-clocks"; reg = <0xffc8003c 4>; clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 856b4236b674..2a6587b0c1f7 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -32,7 +32,7 @@ reg = <0 0x40000000 0 0x40000000>; }; - memory@180000000 { + memory@140000000 { device_type = "memory"; reg = <1 0x40000000 0 0xc0000000>; }; @@ -234,6 +234,11 @@ renesas,groups = "usb2"; renesas,function = "usb2"; }; + + vin1_pins: vin { + renesas,groups = "vin1_data8", "vin1_clk"; + renesas,function = "vin1"; + }; }; ðer { @@ -366,6 +371,19 @@ status = "ok"; pinctrl-0 = <&iic2_pins>; pinctrl-names = "default"; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep0>; + }; + }; + }; }; &iic3 { @@ -374,7 +392,7 @@ status = "okay"; vdd_dvfs: regulator@68 { - compatible = "diasemi,da9210"; + compatible = "dlg,da9210"; reg = <0x68>; regulator-min-microvolt = <1000000>; @@ -401,3 +419,21 @@ pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; }; + +/* composite video input */ +&vin1 { + pinctrl-0 = <&vin1_pins>; + pinctrl-names = "default"; + + status = "ok"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin1ep0: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index d9ddecbb859c..4b6915ac7675 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -33,6 +33,10 @@ spi2 = &msiof1; spi3 = &msiof2; spi4 = &msiof3; + vin0 = &vin0; + vin1 = &vin1; + vin2 = &vin2; + vin3 = &vin3; }; cpus { @@ -217,6 +221,65 @@ <0 3 IRQ_TYPE_LEVEL_HIGH>; }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH + 0 308 IRQ_TYPE_LEVEL_HIGH + 0 309 IRQ_TYPE_LEVEL_HIGH + 0 310 IRQ_TYPE_LEVEL_HIGH + 0 311 IRQ_TYPE_LEVEL_HIGH + 0 312 IRQ_TYPE_LEVEL_HIGH + 0 313 IRQ_TYPE_LEVEL_HIGH + 0 314 IRQ_TYPE_LEVEL_HIGH + 0 315 IRQ_TYPE_LEVEL_HIGH + 0 316 IRQ_TYPE_LEVEL_HIGH + 0 317 IRQ_TYPE_LEVEL_HIGH + 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; @@ -473,6 +536,38 @@ status = "disabled"; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN0>; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN1>; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN2>; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN3>; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -741,33 +836,36 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 + R8A7790_CLK_JPU R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S >; clock-output-names = - "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", + "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-rt", "vsp1-sy"; }; mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>; + <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>, + <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0 R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1 R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2 + R8A7790_CLK_SYS_DMAC1 R8A7790_CLK_SYS_DMAC0 >; clock-output-names = "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", - "scifb1", "msiof1", "msiof3", "scifb2"; + "scifb1", "msiof1", "msiof3", "scifb2", + "sys-dmac1", "sys-dmac0"; }; mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -884,6 +982,8 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -892,9 +992,11 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -902,9 +1004,11 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e10000 0 0x0064>; + reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>; interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -912,9 +1016,11 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e00000 0 0x0064>; + reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>; interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -922,9 +1028,11 @@ msiof3: spi@e6c90000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6c90000 0 0x0064>; + reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>; interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; + dmas = <&dmac0 0x45>, <&dmac0 0x46>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1018,7 +1126,6 @@ rcar_sound: rcar_sound@0xec500000 { #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; - interrupt-parent = <&gic>; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index 3a2ef0a2a137..f1b56de10205 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -135,6 +135,11 @@ renesas,groups = "usb1"; renesas,function = "usb1"; }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; }; &scif0 { @@ -191,6 +196,19 @@ status = "okay"; clock-frequency = <400000>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; }; &qspi { @@ -260,3 +278,20 @@ &pciec { status = "okay"; }; + +/* composite video input */ +&vin0 { + status = "ok"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 23486c081a69..98541c3c580f 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -275,11 +275,6 @@ renesas,function = "msiof0"; }; - i2c6_pins: i2c6 { - renesas,groups = "i2c6"; - renesas,function = "i2c6"; - }; - usb0_pins: usb0 { renesas,groups = "usb0"; renesas,function = "usb0"; @@ -289,6 +284,11 @@ renesas,groups = "usb1"; renesas,function = "usb1"; }; + + vin1_pins: vin1 { + renesas,groups = "vin1_data8", "vin1_clk"; + renesas,function = "vin1"; + }; }; ðer { @@ -412,6 +412,19 @@ status = "okay"; clock-frequency = <400000>; + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep>; + }; + }; + }; + eeprom@50 { compatible = "renesas,24c02"; reg = <0x50>; @@ -420,13 +433,11 @@ }; &i2c6 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; status = "okay"; clock-frequency = <100000>; vdd_dvfs: regulator@68 { - compatible = "diasemi,da9210"; + compatible = "dlg,da9210"; reg = <0x68>; regulator-min-microvolt = <1000000>; @@ -459,3 +470,20 @@ &cpu0 { cpu0-supply = <&vdd_dvfs>; }; + +/* composite video input */ +&vin1 { + status = "ok"; + pinctrl-0 = <&vin1_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin1ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 0d82a4b3c650..9ee1d4133f07 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -34,6 +34,9 @@ spi1 = &msiof0; spi2 = &msiof1; spi3 = &msiof2; + vin0 = &vin0; + vin1 = &vin1; + vin2 = &vin2; }; cpus { @@ -206,6 +209,66 @@ <0 17 IRQ_TYPE_LEVEL_HIGH>; }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH + 0 308 IRQ_TYPE_LEVEL_HIGH + 0 309 IRQ_TYPE_LEVEL_HIGH + 0 310 IRQ_TYPE_LEVEL_HIGH + 0 311 IRQ_TYPE_LEVEL_HIGH + 0 312 IRQ_TYPE_LEVEL_HIGH + 0 313 IRQ_TYPE_LEVEL_HIGH + 0 314 IRQ_TYPE_LEVEL_HIGH + 0 315 IRQ_TYPE_LEVEL_HIGH + 0 316 IRQ_TYPE_LEVEL_HIGH + 0 317 IRQ_TYPE_LEVEL_HIGH + 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { #address-cells = <1>; @@ -518,6 +581,30 @@ status = "disabled"; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7791"; + clocks = <&mstp8_clks R8A7791_CLK_VIN0>; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7791"; + clocks = <&mstp8_clks R8A7791_CLK_VIN1>; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7791"; + clocks = <&mstp8_clks R8A7791_CLK_VIN2>; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -770,16 +857,16 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 + R8A7791_CLK_JPU R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S >; clock-output-names = - "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", + "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-sy"; }; mstp2_clks: mstp2_clks@e6150138 { @@ -925,6 +1012,8 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -933,9 +1022,11 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -943,9 +1034,11 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e10000 0 0x0064>; + reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>; interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -953,9 +1046,11 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e00000 0 0x0064>; + reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>; interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1029,7 +1124,6 @@ rcar_sound: rcar_sound@0xec500000 { #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; - interrupt-parent = <&gic>; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts new file mode 100644 index 000000000000..79d06ef017a0 --- /dev/null +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -0,0 +1,47 @@ +/* + * Device Tree Source for the Alt board + * + * Copyright (C) 2014 Renesas Electronics Corporation + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7794.dtsi" + +/ { + model = "Alt"; + compatible = "renesas,alt", "renesas,r8a7794"; + + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&cmt0 { + status = "ok"; +}; + +&scif2 { + status = "ok"; +}; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi new file mode 100644 index 000000000000..d4e8bce1e0b7 --- /dev/null +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -0,0 +1,531 @@ +/* + * Device Tree Source for the r8a7794 SoC + * + * Copyright (C) 2014 Renesas Electronics Corporation + * Copyright (C) 2014 Ulrich Hecht + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/clock/r8a7794-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "renesas,r8a7794"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + clock-frequency = <1000000000>; + }; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + cmt0: timer@ffca0000 { + compatible = "renesas,cmt-48-gen2"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, + <0 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7794_CLK_CMT0>; + clock-names = "fck"; + + renesas,channels-mask = <0x60>; + + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,cmt-48-gen2"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, + <0 121 IRQ_TYPE_LEVEL_HIGH>, + <0 122 IRQ_TYPE_LEVEL_HIGH>, + <0 123 IRQ_TYPE_LEVEL_HIGH>, + <0 124 IRQ_TYPE_LEVEL_HIGH>, + <0 125 IRQ_TYPE_LEVEL_HIGH>, + <0 126 IRQ_TYPE_LEVEL_HIGH>, + <0 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7794_CLK_CMT1>; + clock-names = "fck"; + + renesas,channels-mask = <0xff>; + + status = "disabled"; + }; + + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7794", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>, + <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 IRQ_TYPE_LEVEL_HIGH>, + <0 16 IRQ_TYPE_LEVEL_HIGH>, + <0 17 IRQ_TYPE_LEVEL_HIGH>; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c40000 0 64>; + interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c50000 0 64>; + interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c60000 0 64>; + interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c70000 0 64>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa4: serial@e6c78000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c78000 0 64>; + interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa5: serial@e6c80000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c80000 0 64>; + interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + reg = <0 0xe6c20000 0 64>; + interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + reg = <0 0xe6c30000 0 64>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + reg = <0 0xe6ce0000 0 64>; + interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6e58000 0 64>; + interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6ea8000 0 64>; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF3>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif4: serial@e6ee0000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6ee0000 0 64>; + interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF4>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif5: serial@e6ee8000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6ee8000 0 64>; + interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF5>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + reg = <0 0xe62c0000 0 96>; + interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + reg = <0 0xe62c8000 0 96>; + interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + reg = <0 0xe62d0000 0 96>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* External root clock */ + extal_clk: extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overriden by the board. */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7794-cpg-clocks", + "renesas,rcar-gen2-cpg-clocks"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll3", + "lb", "qspi", "sdh", "sd0", "z"; + }; + + /* Fixed factor clocks */ + pll1_div2_clk: pll1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "pll1_div2"; + }; + zg_clk: zg_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "zg"; + }; + zx_clk: zx_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "zx"; + }; + zs_clk: zs_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "zs"; + }; + hp_clk: hp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "hp"; + }; + i_clk: i_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "i"; + }; + b_clk: b_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "b"; + }; + p_clk: p_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + clock-output-names = "p"; + }; + cl_clk: cl_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <48>; + clock-mult = <1>; + clock-output-names = "cl"; + }; + m2_clk: m2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "m2"; + }; + imp_clk: imp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "imp"; + }; + rclk_clk: rclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(48 * 1024)>; + clock-mult = <1>; + clock-output-names = "rclk"; + }; + oscclk_clk: oscclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(12 * 1024)>; + clock-mult = <1>; + clock-output-names = "oscclk"; + }; + zb3_clk: zb3_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "zb3"; + }; + zb3d2_clk: zb3d2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "zb3d2"; + }; + ddr_clk: ddr_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "ddr"; + }; + mp_clk: mp_clk { + compatible = "fixed-factor-clock"; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-div = <15>; + clock-mult = <1>; + clock-output-names = "mp"; + }; + cp_clk: cp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <48>; + clock-mult = <1>; + clock-output-names = "cp"; + }; + + acp_clk: acp_clk { + compatible = "fixed-factor-clock"; + clocks = <&extal_clk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "acp"; + }; + + /* Gate clocks */ + mstp0_clks: mstp0_clks@e6150130 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; + clocks = <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7794_CLK_MSIOF0>; + clock-output-names = "msiof0"; + }; + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; + clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + <&cp_clk>, + <&zs_clk>, <&zs_clk>, <&zs_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_TMU1 R8A7794_CLK_TMU3 R8A7794_CLK_TMU2 + R8A7794_CLK_CMT0 R8A7794_CLK_TMU0 + >; + clock-output-names = + "tmu1", "tmu3", "tmu2", "cmt0", "tmu0"; + }; + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&mp_clk>, <&mp_clk>, <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_SCIFA2 R8A7794_CLK_SCIFA1 R8A7794_CLK_SCIFA0 + R8A7794_CLK_MSIOF2 R8A7794_CLK_SCIFB0 R8A7794_CLK_SCIFB1 + R8A7794_CLK_MSIOF1 R8A7794_CLK_SCIFB2 + >; + clock-output-names = + "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", + "scifb1", "msiof1", "scifb2"; + }; + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&rclk_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_CMT1 + >; + clock-output-names = + "cmt1"; + }; + mstp7_clks: mstp7_clks@e615014c { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; + clocks = <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, + <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5 + R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0 + R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1 + R8A7794_CLK_SCIF0 + >; + clock-output-names = + "hscif2", "scif5", "scif4", "hscif1", "hscif0", + "scif3", "scif2", "scif1", "scif0"; + }; + mstp8_clks: mstp8_clks@e6150990 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; + clocks = <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_ETHER + >; + clock-output-names = + "ether"; + }; + mstp11_clks: mstp11_clks@e615099c { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_SCIFA3 R8A7794_CLK_SCIFA4 R8A7794_CLK_SCIFA5 + >; + clock-output-names = "scifa3", "scifa4", "scifa5"; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 042f821d9e4d..d5344510c676 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -149,13 +149,11 @@ &mmc0 { /* sdmmc */ num-slots = <1>; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &mmc1 { /* wifi */ @@ -166,11 +164,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &uart0 { diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 879a818fba51..ad9c2db59670 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -179,6 +179,27 @@ bias-disable; }; + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <RK_GPIO4 9 RK_FUNC_2 &pcfg_pull_default>; + }; + + emmc_rst: emmc-rst { + rockchip,pins = <RK_GPIO4 10 RK_FUNC_2 &pcfg_pull_default>; + }; + + /* + * The data pins are shared between nandc and emmc and + * not accessible through pinctrl. Also they should've + * been already set correctly by firmware, as + * flash/emmc is the boot-device. + */ + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>, @@ -238,6 +259,42 @@ }; }; + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_tx: spi0-tx { + rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_rx: spi0-rx { + rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = <RK_GPIO4 15 RK_FUNC_1 &pcfg_pull_default>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = <RK_GPIO2 19 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = <RK_GPIO2 20 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_rx: spi1-rx { + rockchip,pins = <RK_GPIO2 22 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_tx: spi1-tx { + rockchip,pins = <RK_GPIO2 21 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_cs1: spi1-cs1 { + rockchip,pins = <RK_GPIO2 23 RK_FUNC_2 &pcfg_pull_default>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>, @@ -406,6 +463,16 @@ pinctrl-0 = <&pwm3_out>; }; +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 171b610db709..39f66e349445 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -65,6 +65,19 @@ pinctrl-0 = <&ir_recv_pin>; }; + vcc_otg: usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + vcc_sd0: sdmmc-regulator { compatible = "regulator-fixed"; regulator-name = "sdmmc-supply"; @@ -74,12 +87,36 @@ startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; + + vcc_host: usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "host-pwr"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; }; &i2c1 { status = "okay"; clock-frequency = <400000>; + rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + #clock-cells = <0>; + clock-output-names = "xin32k"; + }; + act8846: act8846@5a { compatible = "active-semi,act8846"; reg = <0x5a>; @@ -149,7 +186,6 @@ regulator-name = "VCC_RMII"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; }; vccio_wl: REG10 { @@ -179,13 +215,12 @@ &mmc0 { num-slots = <1>; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &pinctrl { @@ -199,11 +234,26 @@ }; }; + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + ir-receiver { ir_recv_pin: ir-recv-pin { rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &uart0 { @@ -222,6 +272,14 @@ status = "okay"; }; +&usb_host { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + &wdt { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index ee801a9c6b74..82732f5249b2 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -147,6 +147,27 @@ bias-disable; }; + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <RK_GPIO0 24 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <RK_GPIO0 26 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_rst: emmc-rst { + rockchip,pins = <RK_GPIO0 27 RK_FUNC_2 &pcfg_pull_none>; + }; + + /* + * The data pins are shared between nandc and emmc and + * not accessible through pinctrl. Also they should've + * been already set correctly by firmware, as + * flash/emmc is the boot-device. + */ + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>, @@ -206,6 +227,42 @@ }; }; + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_tx: spi0-tx { + rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_rx: spi0-rx { + rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = <RK_GPIO1 15 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_rx: spi1-rx { + rockchip,pins = <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_tx: spi1-tx { + rockchip,pins = <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_cs1: spi1-cs1 { + rockchip,pins = <RK_GPIO1 14 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>, @@ -381,6 +438,18 @@ pinctrl-0 = <&pwm3_out>; }; +&spi0 { + compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; +}; + +&spi1 { + compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 7d59ff4de408..a76dd44adb53 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -26,7 +26,7 @@ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; + pinctrl-0 = <&pmic_int>; #clock-cells = <0>; clock-output-names = "xin32k"; @@ -124,11 +124,3 @@ }; }; }; - -&pinctrl { - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index 9a88b6c66396..ff522f8e3df4 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -16,3 +16,135 @@ / { compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; }; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc8-supply = <&vcc_18>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vccio_pmu>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd_arm"; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + }; + + vccio_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_pmu"; + }; + + vcc_tp: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_tp"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + }; + + vcc18_lcd: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + + vcca_codec: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_codec"; + }; + + vcc_wl: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_wl"; + }; + + vcc_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_lcd"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 4f572093c8b4..cb83cea52fa1 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -10,6 +10,7 @@ * GNU General Public License for more details. */ +#include <dt-bindings/pwm/pwm.h> #include "rk3288.dtsi" / { @@ -17,6 +18,48 @@ reg = <0x0 0x80000000>; }; + backlight { + compatible = "pwm-backlight"; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <128>; + enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>; + }; + gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -49,6 +92,30 @@ }; }; +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; /* wp not hooked up */ + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; +}; + &i2c0 { status = "okay"; }; @@ -57,6 +124,10 @@ status = "okay"; }; +&pwm0 { + status = "okay"; +}; + &uart0 { status = "okay"; }; @@ -78,12 +149,24 @@ }; &pinctrl { + backlight { + bl_en: bl-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + buttons { pwrbtn: pwrbtn { rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + pmic { + pmic_int: pmic-int { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; @@ -94,3 +177,7 @@ &usb_host0_ehci { status = "okay"; }; + +&usb_host1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 5950b0a53224..be276bdfde04 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -29,11 +29,18 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + mshc0 = &emmc; + mshc1 = &sdmmc; + mshc2 = &sdio0; + mshc3 = &sdio1; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; serial3 = &uart3; serial4 = &uart4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; }; cpus { @@ -62,6 +69,44 @@ }; }; + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dmac_peri: dma-controller@ff250000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xff250000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC2>; + clock-names = "apb_pclk"; + }; + + dmac_bus_ns: dma-controller@ff600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xff600000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dmac_bus_s: dma-controller@ffb20000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xffb20000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + }; + }; + xin24m: oscillator { compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -78,6 +123,95 @@ clock-frequency = <24000000>; }; + sdmmc: dwmmc@ff0c0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0c0000 0x4000>; + status = "disabled"; + }; + + sdio0: dwmmc@ff0d0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0d0000 0x4000>; + status = "disabled"; + }; + + sdio1: dwmmc@ff0e0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0e0000 0x4000>; + status = "disabled"; + }; + + emmc: dwmmc@ff0f0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0f0000 0x4000>; + status = "disabled"; + }; + + saradc: saradc@ff100000 { + compatible = "rockchip,saradc"; + reg = <0xff100000 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + status = "disabled"; + }; + + spi0: spi@ff110000 { + compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; + reg = <0xff110000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@ff120000 { + compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; + reg = <0xff120000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@ff130000 { + compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; + reg = <0xff130000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c1: i2c@ff140000 { compatible = "rockchip,rk3288-i2c"; reg = <0xff140000 0x1000>; @@ -206,6 +340,26 @@ /* NOTE: ohci@ff520000 doesn't actually work on hardware */ + usb_host1: usb@ff540000 { + compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0xff540000 0x40000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_USBHOST1>; + clock-names = "otg"; + status = "disabled"; + }; + + usb_otg: usb@ff580000 { + compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0xff580000 0x40000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG0>; + clock-names = "otg"; + status = "disabled"; + }; + usb_hsic: usb@ff5c0000 { compatible = "generic-ehci"; reg = <0xff5c0000 0x100>; @@ -241,6 +395,50 @@ status = "disabled"; }; + pwm0: pwm@ff680000 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680000 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm1: pwm@ff680010 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680010 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm2: pwm@ff680020 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680020 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm3: pwm@ff680030 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680030 0x10>; + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + pmu: power-management@ff730000 { compatible = "rockchip,rk3288-pmu", "syscon"; reg = <0xff730000 0x100>; @@ -488,6 +686,88 @@ }; }; + sdio0 { + sdio0_bus1: sdio0-bus1 { + rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bus4: sdio0-bus4 { + rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>, + <4 21 RK_FUNC_1 &pcfg_pull_up>, + <4 22 RK_FUNC_1 &pcfg_pull_up>, + <4 23 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none>; + }; + + sdio0_cd: sdio0-cd { + rockchip,pins = <4 26 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_wp: sdio0-wp { + rockchip,pins = <4 27 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_pwr: sdio0-pwr { + rockchip,pins = <4 28 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bkpwr: sdio0-bkpwr { + rockchip,pins = <4 29 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_int: sdio0-int { + rockchip,pins = <4 30 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + sdio1 { + sdio1_bus1: sdio1-bus1 { + rockchip,pins = <3 24 4 &pcfg_pull_up>; + }; + + sdio1_bus4: sdio1-bus4 { + rockchip,pins = <3 24 4 &pcfg_pull_up>, + <3 25 4 &pcfg_pull_up>, + <3 26 4 &pcfg_pull_up>, + <3 27 4 &pcfg_pull_up>; + }; + + sdio1_cd: sdio1-cd { + rockchip,pins = <3 28 4 &pcfg_pull_up>; + }; + + sdio1_wp: sdio1-wp { + rockchip,pins = <3 29 4 &pcfg_pull_up>; + }; + + sdio1_bkpwr: sdio1-bkpwr { + rockchip,pins = <3 30 4 &pcfg_pull_up>; + }; + + sdio1_int: sdio1-int { + rockchip,pins = <3 31 4 &pcfg_pull_up>; + }; + + sdio1_cmd: sdio1-cmd { + rockchip,pins = <4 6 4 &pcfg_pull_up>; + }; + + sdio1_clk: sdio1-clk { + rockchip,pins = <4 7 4 &pcfg_pull_none>; + }; + + sdio1_pwr: sdio1-pwr { + rockchip,pins = <4 9 4 &pcfg_pull_up>; + }; + }; + emmc { emmc_clk: emmc-clk { rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>; @@ -524,6 +804,56 @@ }; }; + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = <5 12 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = <5 13 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_tx: spi0-tx { + rockchip,pins = <5 14 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_rx: spi0-rx { + rockchip,pins = <5 15 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = <5 16 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = <7 12 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = <7 13 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_rx: spi1-rx { + rockchip,pins = <7 14 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_tx: spi1-tx { + rockchip,pins = <7 15 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + spi2 { + spi2_cs1: spi2-cs1 { + rockchip,pins = <8 3 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_clk: spi2-clk { + rockchip,pins = <8 6 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_cs0: spi2-cs0 { + rockchip,pins = <8 7 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_rx: spi2-rx { + rockchip,pins = <8 8 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_tx: spi2-tx { + rockchip,pins = <8 9 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>, @@ -591,5 +921,29 @@ rockchip,pins = <5 15 3 &pcfg_pull_none>; }; }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = <7 1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = <7 22 3 &pcfg_pull_none>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = <7 23 3 &pcfg_pull_none>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 8caf85d83901..7332d12eb565 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -26,6 +26,49 @@ i2c2 = &i2c2; i2c3 = &i2c3; i2c4 = &i2c4; + mshc0 = &emmc; + mshc1 = &mmc0; + mshc2 = &mmc1; + spi0 = &spi0; + spi1 = &spi1; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dmac1_s: dma-controller@20018000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20018000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMA1>; + clock-names = "apb_pclk"; + }; + + dmac1_ns: dma-controller@2001c000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x2001c000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMA1>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dmac2: dma-controller@20078000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20078000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMA2>; + clock-names = "apb_pclk"; + }; }; xin24m: oscillator { @@ -91,12 +134,28 @@ status = "disabled"; }; + usb_otg: usb@10180000 { + compatible = "rockchip,rk3066-usb", "snps,dwc2"; + reg = <0x10180000 0x40000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG0>; + clock-names = "otg"; + status = "disabled"; + }; + + usb_host: usb@101c0000 { + compatible = "snps,dwc2"; + reg = <0x101c0000 0x40000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG1>; + clock-names = "otg"; + status = "disabled"; + }; + mmc0: dwmmc@10214000 { compatible = "rockchip,rk2928-dw-mshc"; reg = <0x10214000 0x1000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; clock-names = "biu", "ciu"; @@ -108,8 +167,6 @@ compatible = "rockchip,rk2928-dw-mshc"; reg = <0x10218000 0x1000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>; clock-names = "biu", "ciu"; @@ -117,6 +174,17 @@ status = "disabled"; }; + emmc: dwmmc@1021c000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x1021c000 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + pmu: pmu@20004000 { compatible = "rockchip,rk3066-pmu", "syscon"; reg = <0x20004000 0x100>; @@ -135,7 +203,6 @@ #size-cells = <0>; rockchip,grf = <&grf>; - rockchip,bus-index = <0>; clock-names = "i2c"; clocks = <&cru PCLK_I2C0>; @@ -264,4 +331,36 @@ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; status = "disabled"; }; + + saradc: saradc@2006c000 { + compatible = "rockchip,saradc"; + reg = <0x2006c000 0x100>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + status = "disabled"; + }; + + spi0: spi@20070000 { + compatible = "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x20070000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@20074000 { + compatible = "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x20074000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 45013b867c8d..5f4144d1e3a1 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -177,6 +177,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf001c000 0x100>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; clocks = <&usart0_clk>; @@ -188,6 +191,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf0020000 0x100>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; clocks = <&usart1_clk>; @@ -333,6 +339,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>, + <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; clocks = <&usart2_clk>; @@ -344,6 +353,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>, + <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; clocks = <&usart3_clk>; @@ -402,14 +414,19 @@ }; ramc0: ramc@ffffea00 { - compatible = "atmel,at91sam9g45-ddramc"; + compatible = "atmel,sama5d3-ddramc"; reg = <0xffffea00 0x200>; + clocks = <&ddrck>, <&mpddr_clk>; + clock-names = "ddrck", "mpddr"; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>, + <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; clocks = <&dbgu_clk>; @@ -428,7 +445,7 @@ pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; ranges = <0xfffff200 0xfffff200 0xa00>; atmel,mux-mask = < /* A B C */ @@ -1003,6 +1020,11 @@ reg = <2>; }; + hsmc_clk: hsmc_clk { + #clock-cells = <0>; + reg = <5>; + }; + pioA_clk: pioA_clk { #clock-cells = <0>; reg = <6>; @@ -1170,6 +1192,11 @@ #clock-cells = <0>; reg = <48>; }; + + mpddr_clk: mpddr_clk { + #clock-cells = <0>; + reg = <49>; + }; }; }; @@ -1178,6 +1205,11 @@ reg = <0xfffffe00 0x10>; }; + shutdown-controller@fffffe10 { + compatible = "atmel,at91sam9x5-shdwc"; + reg = <0xfffffe10 0x10>; + }; + pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; @@ -1393,6 +1425,7 @@ 0xffffc000 0x00000070 /* NFC HSMC regs */ 0x00200000 0x00100000 /* NFC SRAM banks */ >; + clocks = <&hsmc_clk>; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi index a0775851cce5..eaf41451ad0c 100644 --- a/arch/arm/boot/dts/sama5d3_can.dtsi +++ b/arch/arm/boot/dts/sama5d3_can.dtsi @@ -40,7 +40,7 @@ atmel,clk-output-range = <0 66000000>; }; - can1_clk: can0_clk { + can1_clk: can1_clk { #clock-cells = <0>; reg = <41>; atmel,clk-output-range = <0 66000000>; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index f7d8583eef82..962dc28dc37b 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -36,6 +36,36 @@ macb0: ethernet@f0028000 { phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + + ethernet-phy@7 { + reg = <0x7>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; }; pmc: pmc@fffffc00 { diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index b8c6f20e780c..49c10d33df30 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -25,6 +25,8 @@ }; spi0: spi@f0004000 { + dmas = <0>, <0>; /* Do not use DMA for spi0 */ + m25p80@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; @@ -51,6 +53,7 @@ }; usart1: serial@f0020000 { + dmas = <0>, <0>; /* Do not use DMA for usart1 */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; status = "okay"; @@ -132,6 +135,7 @@ }; dbgu: serial@ffffee00 { + dmas = <0>, <0>; /* Do not use DMA for dbgu */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 18662aec2ec4..477f8153debd 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -66,7 +66,7 @@ }; vmmc_sdhi0: regulator@2 { - compatible = "regulator-fixed"; + compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -75,7 +75,7 @@ }; vmmc_sdhi2: regulator@3 { - compatible = "regulator-fixed"; + compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 910b79079d5a..c95935563e44 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -14,6 +14,7 @@ / { compatible = "renesas,sh73a0"; + interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -54,7 +55,6 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupt-parent = <&gic>; interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH 0 2 IRQ_TYPE_LEVEL_HIGH 0 3 IRQ_TYPE_LEVEL_HIGH @@ -74,7 +74,6 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupt-parent = <&gic>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH 0 10 IRQ_TYPE_LEVEL_HIGH 0 11 IRQ_TYPE_LEVEL_HIGH @@ -95,7 +94,6 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupt-parent = <&gic>; interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH @@ -115,7 +113,6 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupt-parent = <&gic>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH 0 26 IRQ_TYPE_LEVEL_HIGH 0 27 IRQ_TYPE_LEVEL_HIGH @@ -131,7 +128,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6820000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH 0 168 IRQ_TYPE_LEVEL_HIGH 0 169 IRQ_TYPE_LEVEL_HIGH @@ -144,7 +140,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6822000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH 0 52 IRQ_TYPE_LEVEL_HIGH 0 53 IRQ_TYPE_LEVEL_HIGH @@ -157,7 +152,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6824000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH 0 172 IRQ_TYPE_LEVEL_HIGH 0 173 IRQ_TYPE_LEVEL_HIGH @@ -170,7 +164,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6826000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH 0 184 IRQ_TYPE_LEVEL_HIGH 0 185 IRQ_TYPE_LEVEL_HIGH @@ -183,7 +176,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6828000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH 0 188 IRQ_TYPE_LEVEL_HIGH 0 189 IRQ_TYPE_LEVEL_HIGH @@ -194,7 +186,6 @@ mmcif: mmc@e6bd0000 { compatible = "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH 0 141 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; @@ -204,7 +195,6 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee100000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH 0 84 IRQ_TYPE_LEVEL_HIGH 0 85 IRQ_TYPE_LEVEL_HIGH>; @@ -216,7 +206,6 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee120000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH 0 89 IRQ_TYPE_LEVEL_HIGH>; toshiba,mmc-wrprotect-disable; @@ -227,7 +216,6 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee140000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH 0 105 IRQ_TYPE_LEVEL_HIGH>; toshiba,mmc-wrprotect-disable; @@ -238,7 +226,6 @@ scifa0: serial@e6c40000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c40000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -246,7 +233,6 @@ scifa1: serial@e6c50000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c50000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -254,7 +240,6 @@ scifa2: serial@e6c60000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c60000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -262,7 +247,6 @@ scifa3: serial@e6c70000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c70000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -270,7 +254,6 @@ scifa4: serial@e6c80000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c80000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -278,7 +261,6 @@ scifa5: serial@e6cb0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cb0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -286,7 +268,6 @@ scifa6: serial@e6cc0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cc0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -294,7 +275,6 @@ scifa7: serial@e6cd0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cd0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -302,7 +282,6 @@ scifb8: serial@e6c30000 { compatible = "renesas,scifb-sh73a0", "renesas,scifb"; reg = <0xe6c30000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -328,7 +307,6 @@ #sound-dai-cells = <1>; compatible = "renesas,sh_fsi2"; reg = <0xec230000 0x400>; - interrupt-parent = <&gic>; interrupts = <0 146 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 4d77ad690ed5..45fce2cf6fed 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -607,6 +607,17 @@ }; }; + sdr: sdr@ffc25000 { + compatible = "syscon"; + reg = <0xffc25000 0x1000>; + }; + + sdramedac { + compatible = "altr,sdram-edac"; + altr,sdr-syscon = <&sdr>; + interrupts = <0 39 4>; + }; + L2: l2-cache@fffef000 { compatible = "arm,pl310-cache"; reg = <0xfffef000 0x1000>; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index 12d1c2ccaf5b..03e8268ae219 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -15,6 +15,8 @@ */ /dts-v1/; +/* First 4KB has trampoline code for secondary cores. */ +/memreserve/ 0x00000000 0x0001000; #include "socfpga.dtsi" / { @@ -29,13 +31,10 @@ dwmmc0@ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; sysmgr@ffd08000 { diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index d532d171e391..27d551c384d0 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -37,13 +37,6 @@ */ ethernet0 = &gmac1; }; - - aliases { - /* this allow the ethaddr uboot environmnet variable contents - * to be added to the gmac1 device tree blob. - */ - ethernet0 = &gmac1; - }; }; &gmac1 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index bf511828729f..28c05e7a31c9 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi @@ -16,6 +16,8 @@ */ /dts-v1/; +/* First 4KB has trampoline code for secondary cores. */ +/memreserve/ 0x00000000 0x0001000; #include "socfpga.dtsi" / { @@ -28,15 +30,12 @@ }; }; - dwmmc0@ff704000 { + mmc0: dwmmc0@ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; ethernet@ff702000 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 45de1514af0a..d7296a5f750c 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -68,6 +68,10 @@ }; }; +&mmc0 { + cd-gpios = <&gpio1 18 0>; +}; + &usb1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts index 09792b411110..f9345e02ca49 100644 --- a/arch/arm/boot/dts/socfpga_vt.dts +++ b/arch/arm/boot/dts/socfpga_vt.dts @@ -43,13 +43,10 @@ dwmmc0@ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; ethernet@ff700000 { diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 459cb6377764..380f914b226d 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -339,12 +339,22 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -356,6 +366,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -451,6 +463,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -490,6 +504,8 @@ interrupts = <50>; clocks = <&ahb_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 31>, <&dma 1 30>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -749,7 +765,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -760,7 +775,6 @@ reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -771,7 +785,6 @@ reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 24b0ad3a7c07..d73a2287b37a 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -300,12 +300,22 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -317,6 +327,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -403,6 +415,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -564,7 +578,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; }; @@ -575,7 +588,6 @@ reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; }; @@ -586,7 +598,6 @@ reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts new file mode 100644 index 000000000000..8b3cd0907b32 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -0,0 +1,130 @@ +/* + * Copyright 2014 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun5i-a13.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "HSG H702"; + compatible = "hsg,h702", "allwinner,sun5i-a13"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + /* + * There doesn't seem to be a GPIO for controlling + * usb1 vbus, despite the fex file saying otherwise. + */ + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + pinctrl@01c20800 { + mmc0_cd_pin_h702: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + }; + + uart1: serial@01c28400 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index bf86e65dd167..c4b5d7825b9f 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -298,12 +298,22 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -315,6 +325,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -376,6 +388,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -490,7 +504,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -501,7 +514,6 @@ reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -512,7 +524,6 @@ reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 44b07e512c24..543f895d18d3 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -3,12 +3,48 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /include/ "skeleton.dtsi" @@ -657,9 +693,10 @@ reg = <0x01c2ac00 0x400>; interrupts = <0 6 4>; clocks = <&apb2_gates 0>; - clock-frequency = <100000>; resets = <&apb2_rst 0>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { @@ -667,9 +704,10 @@ reg = <0x01c2b000 0x400>; interrupts = <0 7 4>; clocks = <&apb2_gates 1>; - clock-frequency = <100000>; resets = <&apb2_rst 1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { @@ -677,9 +715,10 @@ reg = <0x01c2b400 0x400>; interrupts = <0 8 4>; clocks = <&apb2_gates 2>; - clock-frequency = <100000>; resets = <&apb2_rst 2>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c3: i2c@01c2b800 { @@ -687,9 +726,10 @@ reg = <0x01c2b800 0x400>; interrupts = <0 9 4>; clocks = <&apb2_gates 3>; - clock-frequency = <100000>; resets = <&apb2_rst 3>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; gmac: ethernet@01c30000 { @@ -779,6 +819,12 @@ interrupts = <1 9 0xf04>; }; + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <0 40 4>, <0 41 4>; + }; + nmi_intc: interrupt-controller@01f00c0c { compatible = "allwinner,sun6i-a31-sc-nmi"; interrupt-controller; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts new file mode 100644 index 000000000000..0e4bfa3b2b85 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -0,0 +1,236 @@ +/* + * Copyright 2013 Wills Wang + * + * Wills Wang <wills.wang.open@gmail.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Merrii A20 Hummingbird"; + compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc3: mmc@01c12000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_mmc3_vdd>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pio: pinctrl@01c20800 { + ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { + allwinner,pins = "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + pwm: pwm@01c20e00 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + uart2: serial@01c28800 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; + }; + + uart3: serial@01c28c00 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>; + status = "okay"; + }; + + uart4: serial@01c29000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; + }; + + uart5: serial@01c29400 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; + + i2c3: i2c@01c2b800 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_a>; + status = "okay"; + }; + + spi2: spi@01c17000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_b>; + status = "okay"; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_vdd>; + /* phy reset config */ + snps,reset-gpio = <&pio 0 17 0>; /* PA17 */ + snps,reset-active-low; + /* wait 1s after reset, otherwise fail to read phy id */ + snps,reset-delays-us = <0 10000 1000000>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + reg_ahci_5v: ahci-5v { + pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; + gpio = <&pio 7 15 0>; /* PH15 */ + status = "okay"; + }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; + gpio = <&pio 7 2 0>; /* PH2 */ + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_mmc3_vdd: mmc3_vdd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_vdd_pin_a20_hummingbird>; + regulator-name = "mmc3_vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + enable-active-high; + gpio = <&pio 7 9 0>; /* PH9 */ + }; + + reg_gmac_vdd: gmac_vdd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_vdd_pin_a20_hummingbird>; + regulator-name = "gmac_vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + enable-active-high; + gpio = <&pio 7 16 0>; /* PH16 */ + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts new file mode 100644 index 000000000000..1eb8175959a6 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -0,0 +1,137 @@ +/* + * This is based on sun4i-a10-olinuxino-lime.dts + * + * Copyright 2014 - Hans de Goede <hdegoede@redhat.com> + * Copyright (c) 2014 FUKAUMI Naoki <naobsd@gmail.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Olimex A20-OLinuXino-LIME"; + compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; + + green { + label = "a20-olinuxino-lime:green:usr"; + gpios = <&pio 7 2 0>; + default-state = "on"; + }; + }; + + reg_ahci_5v: ahci-5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 0>; + status = "okay"; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 4011628c7381..a96b99465069 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -3,12 +3,48 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /include/ "skeleton.dtsi" @@ -423,12 +459,22 @@ interrupts = <0 0 4>; }; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 27 4>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <0 10 4>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -440,6 +486,8 @@ interrupts = <0 11 4>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -535,6 +583,8 @@ interrupts = <0 12 4>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -574,6 +624,8 @@ interrupts = <0 50 4>; clocks = <&ahb_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 31>, <&dma 1 30>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -618,6 +670,27 @@ allwinner,pull = <0>; }; + uart3_pins_a: uart3@0 { + allwinner,pins = "PG6", "PG7", "PG8", "PG9"; + allwinner,function = "uart3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart4_pins_a: uart4@0 { + allwinner,pins = "PG10", "PG11"; + allwinner,function = "uart4"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart5_pins_a: uart5@0 { + allwinner,pins = "PI10", "PI11"; + allwinner,function = "uart5"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart6_pins_a: uart6@0 { allwinner,pins = "PI12", "PI13"; allwinner,function = "uart6"; @@ -653,6 +726,13 @@ allwinner,pull = <0>; }; + i2c3_pins_a: i2c3@0 { + allwinner,pins = "PI0", "PI1"; + allwinner,function = "i2c3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + emac_pins_a: emac0@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -718,6 +798,13 @@ allwinner,pull = <0>; }; + spi2_pins_b: spi2@1 { + allwinner,pins = "PB14", "PB15", "PB16", "PB17"; + allwinner,function = "spi2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; @@ -899,7 +986,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <0 7 4>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -910,7 +996,6 @@ reg = <0x01c2b000 0x400>; interrupts = <0 8 4>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -921,7 +1006,6 @@ reg = <0x01c2b400 0x400>; interrupts = <0 9 4>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -932,7 +1016,6 @@ reg = <0x01c2b800 0x400>; interrupts = <0 88 4>; clocks = <&apb1_gates 3>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -943,7 +1026,6 @@ reg = <0x01c2c000 0x400>; interrupts = <0 89 4>; clocks = <&apb1_gates 15>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 34002e3eba9d..e9b8cca8dcc1 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sun8i-a23.dtsi" +/include/ "sunxi-common-regulators.dtsi" / { model = "Ippo Q8H Dual Core Tablet (v5)"; @@ -23,7 +24,47 @@ }; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 0>; /* PB4 */ + cd-inverted; + status = "okay"; + }; + + pinctrl@01c20800 { + mmc0_cd_pin_q8h: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + /* pull-ups and devices require PMIC regulator */ + status = "failed"; + }; + r_uart: serial@01f02800 { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 54ac0787216a..6146ef15efbe 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -3,12 +3,48 @@ * * Chen-Yu Tsai <wens@csie.org> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /include/ "skeleton.dtsi" @@ -179,6 +215,30 @@ "apb2_uart1", "apb2_uart2", "apb2_uart3", "apb2_uart4"; }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc2"; + }; }; soc@01c00000 { @@ -187,6 +247,104 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun8i-a23-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 50 4>; + clocks = <&ahb1_gates 6>; + resets = <&ahb1_rst 6>; + #dma-cells = <1>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb1_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 8>; + reset-names = "ahb"; + interrupts = <0 60 4>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb1_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 9>; + reset-names = "ahb"; + interrupts = <0 61 4>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb1_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 10>; + reset-names = "ahb"; + interrupts = <0 62 4>; + status = "disabled"; + }; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-a23-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <0 11 4>, + <0 15 4>, + <0 17 4>; + clocks = <&apb1_gates 5>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5"; + allwinner,function = "mmc1"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PH2", "PH3"; + allwinner,function = "i2c0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "i2c1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PE12", "PE13"; + allwinner,function = "i2c2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + ahb1_rst: reset@01c202c0 { #reset-cells = <1>; compatible = "allwinner,sun6i-a31-clock-reset"; @@ -227,6 +385,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 16>; resets = <&apb2_rst 16>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -238,6 +398,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 17>; resets = <&apb2_rst 17>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -249,6 +411,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 18>; resets = <&apb2_rst 18>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -260,6 +424,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 19>; resets = <&apb2_rst 19>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -271,9 +437,44 @@ reg-io-width = <4>; clocks = <&apb2_gates 20>; resets = <&apb2_rst 20>; + dmas = <&dma 10>, <&dma 10>; + dma-names = "rx", "tx"; status = "disabled"; }; + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <0 6 4>; + clocks = <&apb2_gates 0>; + resets = <&apb2_rst 0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <0 7 4>; + clocks = <&apb2_gates 1>; + resets = <&apb2_rst 1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <0 8 4>; + clocks = <&apb2_gates 2>; + resets = <&apb2_rst 2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, @@ -285,6 +486,12 @@ interrupts = <1 9 0xf04>; }; + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <0 40 4>, <0 41 4>; + }; + prcm@01f01400 { compatible = "allwinner,sun8i-a23-prcm"; reg = <0x01f01400 0x200>; @@ -339,5 +546,25 @@ resets = <&apb0_rst 4>; status = "disabled"; }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-a23-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <0 45 4>; + clocks = <&apb0_gates 0>; + resets = <&apb0_rst 0>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + r_uart_pins_a: r_uart@0 { + allwinner,pins = "PL2", "PL3"; + allwinner,function = "s_uart"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index 3d021efd1a38..c9c5b10e03eb 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -86,4 +86,11 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; }; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 80b8eddb4105..2ca9c1807f72 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -157,6 +157,11 @@ #reset-cells = <1>; }; + flow-controller@60007000 { + compatible = "nvidia,tegra114-flowctrl"; + reg = <0x60007000 0x1000>; + }; + apbdma: dma@6000a000 { compatible = "nvidia,tegra114-apbdma"; reg = <0x6000a000 0x1400>; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 624b0fba2d0a..029c9a021541 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -16,6 +16,26 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; + pcie-controller@0,01003000 { + status = "okay"; + + avddio-pex-supply = <&vdd_1v05_run>; + dvddio-pex-supply = <&vdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-supply = <&vdd_3v3_lp0>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + vddio-pex-ctl-supply = <&vdd_3v3_lp0>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + + pci@1,0 { + status = "okay"; + }; + + pci@2,0 { + status = "okay"; + }; + }; + host1x@0,50000000 { hdmi@0,54280000 { status = "okay"; @@ -31,10 +51,10 @@ }; pinmux: pinmux@0,70000868 { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; + pinctrl-names = "boot"; + pinctrl-0 = <&state_boot>; - state_default: pinmux { + state_boot: pinmux { clk_32k_out_pa0 { nvidia,pins = "clk_32k_out_pa0"; nvidia,function = "soc"; @@ -1231,6 +1251,41 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; + pex_l0_rst_n_pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "pe0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l0_clkreq_n_pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "pe0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3"; + nvidia,function = "pe"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l1_rst_n_pdd5 { + nvidia,pins = "pex_l1_rst_n_pdd5"; + nvidia,function = "pe1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l1_clkreq_n_pdd6 { + nvidia,pins = "pex_l1_clkreq_n_pdd6"; + nvidia,function = "pe1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; clk3_out_pee0 { nvidia,pins = "clk3_out_pee0"; nvidia,function = "extperiph3"; @@ -1515,7 +1570,7 @@ regulator-always-on; }; - ldo0 { + avdd_1v05_run: ldo0 { regulator-name = "+1.05V_RUN_AVDD"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -1619,6 +1674,18 @@ nvidia,sys-clock-req-active-high; }; + /* Serial ATA */ + sata@0,70020000 { + status = "okay"; + + hvdd-supply = <&vdd_3v3_lp0>; + vddio-supply = <&vdd_1v05_run>; + avdd-supply = <&vdd_1v05_run>; + + target-5v-supply = <&vdd_5v0_sata>; + target-12v-supply = <&vdd_12v0_sata>; + }; + padctl@0,7009f000 { pinctrl-0 = <&padctl_default>; pinctrl-names = "default"; @@ -1828,6 +1895,29 @@ enable-active-high; vin-supply = <&vdd_5v0_sys>; }; + + /* Molex power connector */ + vdd_5v0_sata: regulator@13 { + compatible = "regulator-fixed"; + reg = <13>; + regulator-name = "+5V_SATA"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_12v0_sata: regulator@14 { + compatible = "regulator-fixed"; + reg = <14>; + regulator-name = "+12V_SATA"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts new file mode 100644 index 000000000000..7d0784ce4c74 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -0,0 +1,1136 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra124.dtsi" + +/ { + model = "Acer Chromebook 13 CB5-311"; + compatible = "google,nyan-big", "nvidia,tegra124"; + + aliases { + rtc0 = "/i2c@0,7000d000/pmic@40"; + rtc1 = "/rtc@0,7000e000"; + }; + + memory { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + host1x@0,50000000 { + hdmi@0,54280000 { + status = "okay"; + + vdd-supply = <&vdd_3v3_hdmi>; + pll-supply = <&vdd_hdmi_pll>; + hdmi-supply = <&vdd_5v0_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + + sor@0,54540000 { + status = "okay"; + + nvidia,dpaux = <&dpaux>; + nvidia,panel = <&panel>; + }; + + dpaux@0,545c0000 { + vdd-supply = <&vdd_3v3_panel>; + status = "okay"; + }; + }; + + pinmux@0,70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_default>; + + pinmux_default: common { + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5", + "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0", + "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pg4 { + nvidia,pins = "pg4", + "pg5", + "pg6", + "pi3"; + nvidia,function = "spi4"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pk0 { + nvidia,pins = "pk0", + "kb_row15_ps7", + "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "kb_col4_pq4", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5", + "sdmmc3_cd_n_pv2"; + nvidia,function = "sdmmc3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5", + "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4", + "usb_vbus_en1_pn5"; + nvidia,function = "usb"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>; + }; + drive_sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <22>; + nvidia,pull-up-strength = <36>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; + drive_gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <2>; + nvidia,pull-up-strength = <1>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,drive-type = <1>; + }; + codec_irq_l { + nvidia,pins = "ph4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_bl_en { + nvidia,pins = "ph2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + touch_irq_l { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + tpm_davint_l { + nvidia,pins = "ph6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ts_irq_l { + nvidia,pins = "pk2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ts_reset_l { + nvidia,pins = "pk4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ts_shdn_l { + nvidia,pins = "pk1"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph7 { + nvidia,pins = "ph7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col0_ap { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lid_open { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + en_vdd_sd { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ac_ok { + nvidia,pins = "pj0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sensor_irq_l { + nvidia,pins = "pi6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + wifi_en { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + en_vdd_bl { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + en_vdd_hdmi { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + soc_warm_reset_l { + nvidia,pins = "pi5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + hp_det_l { + nvidia,pins = "pi7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + mic_det_l { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + }; + }; + + serial@0,70006000 { + /* Debug connector on the bottom of the board near SD card. */ + status = "okay"; + }; + + pwm@0,7000a000 { + status = "okay"; + }; + + i2c@0,7000c000 { + status = "okay"; + clock-frequency = <100000>; + + acodec: audio-codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + }; + + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + + #thermal-sensor-cells = <1>; + }; + }; + + i2c@0,7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000c500 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; + }; + + hdmi_ddc: i2c@0,7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: pmic@40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + + ams,system-power-controller; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + bias-pull-down; + }; + + gpio1 { + pins = "gpio1"; + function = "gpio"; + bias-pull-up; + }; + + gpio2_4_7 { + pins = "gpio2", "gpio4", "gpio7"; + function = "gpio"; + bias-pull-up; + }; + + gpio3_6 { + pins = "gpio3", "gpio6"; + bias-high-impedance; + }; + + gpio5 { + pins = "gpio5"; + function = "clk32k-out"; + bias-pull-down; + }; + }; + + regulators { + vsup-sd2-supply = <&vdd_5v0_sys>; + vsup-sd3-supply = <&vdd_5v0_sys>; + vsup-sd4-supply = <&vdd_5v0_sys>; + vsup-sd5-supply = <&vdd_5v0_sys>; + vin-ldo0-supply = <&vdd_1v35_lp0>; + vin-ldo1-6-supply = <&vdd_3v3_run>; + vin-ldo2-5-7-supply = <&vddio_1v8>; + vin-ldo3-4-supply = <&vdd_3v3_sys>; + vin-ldo9-10-supply = <&vdd_5v0_sys>; + vin-ldo11-supply = <&vdd_3v3_run>; + + sd0 { + regulator-name = "+VDD_CPU_AP"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <2>; + }; + + sd1 { + regulator-name = "+VDD_CORE"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <4000000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <1>; + }; + + vdd_1v35_lp0: sd2 { + regulator-name = "+1.35V_LP0(sd2)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = "+1.35V_LP0(sd3)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v05_run: sd4 { + regulator-name = "+1.05V_RUN"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vddio_1v8: sd5 { + regulator-name = "+1.8V_VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sd6 { + regulator-name = "+VDD_GPU_AP"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0 { + regulator-name = "+1.05V_RUN_AVDD"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + ams,ext-control = <1>; + }; + + ldo1 { + regulator-name = "+1.8V_RUN_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2 { + regulator-name = "+1.2V_GEN_AVDD"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3 { + regulator-name = "+1.00V_LP0_VDD_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + ams,enable-tracking; + }; + + vdd_run_cam: ldo4 { + regulator-name = "+3.3V_RUN_CAM"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo5 { + regulator-name = "+1.2V_RUN_CAM_FRONT"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vddio_sdmmc3: ldo6 { + regulator-name = "+VDDIO_SDMMC3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "+1.05V_RUN_CAM_REAR"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo9 { + regulator-name = "+2.8V_RUN_TOUCH"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10 { + regulator-name = "+2.8V_RUN_CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo11 { + regulator-name = "+1.8V_RUN_VPP_FUSE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; + + spi@0,7000d400 { + status = "okay"; + + cros_ec: cros-ec@0 { + compatible = "google,cros-ec-spi"; + spi-max-frequency = <3000000>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>; + reg = <0>; + + google,cros-ec-spi-msg-delay = <2000>; + + i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + + google,remote-bus = <0>; + + charger: bq24735@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + ti,ac-detect-gpios = <&gpio + TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + }; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <10>; + power-supplies = <&charger>; + }; + }; + }; + }; + + spi@0,7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + + flash@0 { + compatible = "winbond,w25q32dw"; + reg = <0>; + }; + }; + + pmc@0,7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + hda@0,70030000 { + status = "okay"; + }; + + sdhci@0,700b0000 { /* WiFi/BT on this bus */ + status = "okay"; + power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + no-1-8-v; + non-removable; + }; + + sdhci@0,700b0400 { /* SD Card on this bus */ + status = "okay"; + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; + bus-width = <4>; + no-1-8-v; + vqmmc-supply = <&vddio_sdmmc3>; + }; + + sdhci@0,700b0600 { /* eMMC on this bus */ + status = "okay"; + bus-width = <8>; + no-1-8-v; + non-removable; + }; + + ahub@0,70300000 { + i2s@0,70301100 { + status = "okay"; + }; + }; + + usb@0,7d000000 { /* Rear external USB port. */ + status = "okay"; + }; + + usb-phy@0,7d000000 { + status = "okay"; + vbus-supply = <&vdd_usb1_vbus>; + }; + + usb@0,7d004000 { /* Internal webcam. */ + status = "okay"; + }; + + usb-phy@0,7d004000 { + status = "okay"; + vbus-supply = <&vdd_run_cam>; + }; + + usb@0,7d008000 { /* Left external USB port. */ + status = "okay"; + }; + + usb-phy@0,7d008000 { + status = "okay"; + vbus-supply = <&vdd_usb3_vbus>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_led>; + pwms = <&pwm 1 1000000>; + + default-brightness-level = <224>; + brightness-levels = + < 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255 + 256>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + lid { + label = "Lid"; + gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <5>; + linux,code = <KEY_RESERVED>; + debounce-interval = <1>; + gpio-key,wakeup; + }; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <30>; + gpio-key,wakeup; + }; + }; + + panel: panel { + compatible = "auo,b133xtn01"; + + backlight = <&backlight>; + ddc-i2c-bus = <&dpaux>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_led: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "+VDD_LED"; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; + + vdd_5v0_ts: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "+5V_VDD_TS_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb1_vbus: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb3_vbus: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "+5V_USB_SS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_3v3_panel: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "+3.3V_PANEL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pmic 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_3v3_lp0: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* + * TODO: find a way to wire this up with the USB EHCI + * controllers so that it can be enabled on demand. + */ + regulator-always-on; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_hdmi_pll: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; + + vdd_5v0_hdmi: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-max98090-nyan-big", + "nvidia,tegra-audio-max98090"; + nvidia,model = "Acer Chromebook 13"; + + nvidia,audio-routing = + "Headphones", "HPR", + "Headphones", "HPL", + "Speakers", "SPKR", + "Speakers", "SPKL", + "Mic Jack", "MICBIAS", + "DMICL", "Int Mic", + "DMICR", "Int Mic", + "IN34", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&acodec>; + + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; + }; +}; + +#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 70ad91d1a20b..13008858e967 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -36,17 +36,17 @@ nvidia,panel = <&panel>; }; - dpaux: dpaux@0,545c0000 { + dpaux@0,545c0000 { vdd-supply = <&vdd_3v3_panel>; status = "okay"; }; }; pinmux: pinmux@0,70000868 { - pinctrl-names = "default"; - pinctrl-0 = <&pinmux_default>; + pinctrl-names = "boot"; + pinctrl-0 = <&pinmux_boot>; - pinmux_default: common { + pinmux_boot: common { dap_mclk1_pw4 { nvidia,pins = "dap_mclk1_pw4"; nvidia,function = "extperiph1"; @@ -587,7 +587,7 @@ status = "okay"; }; - pwm: pwm@0,7000a000 { + pwm@0,7000a000 { status = "okay"; }; @@ -606,6 +606,14 @@ i2c@0,7000c400 { status = "okay"; clock-frequency = <100000>; + + trackpad@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>; + linux,gpio-keymap = <0 0 0 BTN_LEFT>; + }; }; i2c@0,7000c500 { diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 03916efd6fa9..478c555ebd96 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -12,6 +12,72 @@ #address-cells = <2>; #size-cells = <2>; + pcie-controller@0,01003000 { + compatible = "nvidia,tegra124-pcie"; + device_type = "pci"; + reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ + 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ + 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + + clocks = <&tegra_car TEGRA124_CLK_PCIE>, + <&tegra_car TEGRA124_CLK_AFI>, + <&tegra_car TEGRA124_CLK_PLL_E>, + <&tegra_car TEGRA124_CLK_CML0>; + clock-names = "pex", "afi", "pll_e", "cml"; + resets = <&tegra_car 70>, + <&tegra_car 72>, + <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; + status = "disabled"; + + phys = <&padctl TEGRA_XUSB_PADCTL_PCIE>; + phy-names = "pcie"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + host1x@0,50000000 { compatible = "nvidia,tegra124-host1x", "simple-bus"; reg = <0x0 0x50000000 0x0 0x00034000>; @@ -78,7 +144,7 @@ status = "disabled"; }; - dpaux@0,545c0000 { + dpaux: dpaux@0,545c0000 { compatible = "nvidia,tegra124-dpaux"; reg = <0x0 0x545c0000 0x0 0x00040000>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; @@ -137,6 +203,11 @@ #reset-cells = <1>; }; + flow-controller@0,60007000 { + compatible = "nvidia,tegra124-flowctrl"; + reg = <0x0 0x60007000 0x0 0x1000>; + }; + gpio: gpio@0,6000d000 { compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; reg = <0x0 0x6000d000 0x0 0x1000>; @@ -267,7 +338,7 @@ status = "disabled"; }; - pwm@0,7000a000 { + pwm: pwm@0,7000a000 { compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm"; reg = <0x0 0x7000a000 0x0 0x100>; #pwm-cells = <2>; @@ -480,6 +551,31 @@ reset-names = "fuse"; }; + sata@0,70020000 { + compatible = "nvidia,tegra124-ahci"; + + reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */ + <0x0 0x70020000 0x0 0x7000>; /* SATA */ + + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA124_CLK_SATA>, + <&tegra_car TEGRA124_CLK_SATA_OOB>, + <&tegra_car TEGRA124_CLK_CML1>, + <&tegra_car TEGRA124_CLK_PLL_E>; + clock-names = "sata", "sata-oob", "cml1", "pll_e"; + + resets = <&tegra_car 124>, + <&tegra_car 123>, + <&tegra_car 129>; + reset-names = "sata", "sata-oob", "sata-cold"; + + phys = <&padctl TEGRA_XUSB_PADCTL_SATA>; + phy-names = "sata-phy"; + + status = "disabled"; + }; + hda@0,70030000 { compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda"; reg = <0x0 0x70030000 0x0 0x10000>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 1908f6937e53..3b374c49d04d 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -190,6 +190,11 @@ #reset-cells = <1>; }; + flow-controller@60007000 { + compatible = "nvidia,tegra20-flowctrl"; + reg = <0x60007000 0x1000>; + }; + apbdma: dma@6000a000 { compatible = "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1200>; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 8adaa7871dd3..a5446cba9804 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -423,7 +423,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -674,5 +674,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index bf16f8e65627..c4ed1bec4d92 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -201,7 +201,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -373,5 +373,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 6b35c29278d7..aa6ccea13d30 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -272,6 +272,11 @@ #reset-cells = <1>; }; + flow-controller@60007000 { + compatible = "nvidia,tegra30-flowctrl"; + reg = <0x60007000 0x1000>; + }; + apbdma: dma@6000a000 { compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1400>; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 2e3bd3172b23..55eb35f068fb 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -83,10 +83,6 @@ regulator-always-on; }; - clk32kg: regulator-clk32kg { - compatible = "ti,twl6030-clk32kg"; - }; - twl_usb_comparator: usb-comparator { compatible = "ti,twl6030-usb"; interrupts = <4>, <10>; diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts new file mode 100644 index 000000000000..7fb306679341 --- /dev/null +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts @@ -0,0 +1,46 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "vf610-colibri.dtsi" + +/ { + model = "Toradex Colibri VF61 on Colibri Evaluation Board"; + compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610"; + + chosen { + bootargs = "console=ttyLP0,115200"; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf610-colibri.dts b/arch/arm/boot/dts/vf610-colibri.dtsi index aecc7dbc65e8..0cd83434b073 100644 --- a/arch/arm/boot/dts/vf610-colibri.dts +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -7,16 +7,11 @@ * (at your option) any later version. */ -/dts-v1/; #include "vf610.dtsi" / { model = "Toradex Colibri VF61 COM"; - compatible = "toradex,vf610-colibri", "fsl,vf610"; - - chosen { - bootargs = "console=ttyLP0,115200"; - }; + compatible = "toradex,vf610-colibri_vf61", "fsl,vf610"; memory { reg = <0x80000000 0x10000000>; @@ -36,14 +31,12 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; - status = "okay"; }; &fec1 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; - status = "okay"; }; &L2 { @@ -54,25 +47,32 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; +}; + +&usbdev0 { + disable-over-current; + status = "okay"; +}; + +&usbh1 { + disable-over-current; status = "okay"; }; &iomuxc { vf610-colibri { pinctrl_esdhc1: esdhc1grp { - fsl,fsl,pins = < + fsl,pins = < VF610_PAD_PTA24__ESDHC1_CLK 0x31ef VF610_PAD_PTA25__ESDHC1_CMD 0x31ef VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 11d733406c7e..189b6975fe7d 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -76,7 +76,6 @@ simple-audio-card,cpu { sound-dai = <&sai2>; - master-clkdir-out; frame-master; bitclock-master; }; @@ -168,7 +167,7 @@ }; pinctrl_esdhc1: esdhc1grp { - fsl,fsl,pins = < + fsl,pins = < VF610_PAD_PTA24__ESDHC1_CLK 0x31ef VF610_PAD_PTA25__ESDHC1_CMD 0x31ef VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef @@ -221,8 +220,6 @@ VF610_PAD_PTB1__FTM0_CH1 0x1582 VF610_PAD_PTB2__FTM0_CH2 0x1582 VF610_PAD_PTB3__FTM0_CH3 0x1582 - VF610_PAD_PTB6__FTM0_CH6 0x1582 - VF610_PAD_PTB7__FTM0_CH7 0x1582 >; }; @@ -244,6 +241,13 @@ VF610_PAD_PTB5__UART1_RX 0x21a1 >; }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTB6__UART2_TX 0x21a2 + VF610_PAD_PTB7__UART2_RX 0x21a1 + >; + }; }; }; @@ -265,3 +269,19 @@ pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbdev0 { + disable-over-current; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 583dd363c9dc..4d2ec32de96f 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -27,6 +27,8 @@ gpio2 = &gpio3; gpio3 = &gpio4; gpio4 = &gpio5; + usbphy0 = &usbphy0; + usbphy1 = &usbphy1; }; cpus { @@ -297,9 +299,25 @@ gpio-ranges = <&iomuxc 0 128 7>; }; - anatop@40050000 { - compatible = "fsl,vf610-anatop"; - reg = <0x40050000 0x1000>; + anatop: anatop@40050000 { + compatible = "fsl,vf610-anatop", "syscon"; + reg = <0x40050000 0x400>; + }; + + usbphy0: usbphy@40050800 { + compatible = "fsl,vf610-usbphy"; + reg = <0x40050800 0x400>; + interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBPHY0>; + fsl,anatop = <&anatop>; + }; + + usbphy1: usbphy@40050c00 { + compatible = "fsl,vf610-usbphy"; + reg = <0x40050c00 0x400>; + interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBPHY1>; + fsl,anatop = <&anatop>; }; i2c0: i2c@40066000 { @@ -321,6 +339,24 @@ reg = <0x4006b000 0x1000>; #clock-cells = <1>; }; + + usbdev0: usb@40034000 { + compatible = "fsl,vf610-usb", "fsl,imx27-usb"; + reg = <0x40034000 0x800>; + interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBC0>; + fsl,usbphy = <&usbphy0>; + fsl,usbmisc = <&usbmisc0 0>; + dr_mode = "peripheral"; + status = "disabled"; + }; + + usbmisc0: usb@40034800 { + #index-cells = <1>; + compatible = "fsl,vf610-usbmisc"; + reg = <0x40034800 0x200>; + clocks = <&clks VF610_CLK_USBC0>; + }; }; aips1: aips-bus@40080000 { @@ -383,6 +419,24 @@ status = "disabled"; }; + usbh1: usb@400b4000 { + compatible = "fsl,vf610-usb", "fsl,imx27-usb"; + reg = <0x400b4000 0x800>; + interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBC1>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + dr_mode = "host"; + status = "disabled"; + }; + + usbmisc1: usb@400b4800 { + #index-cells = <1>; + compatible = "fsl,vf610-usbmisc"; + reg = <0x400b4800 0x200>; + clocks = <&clks VF610_CLK_USBC1>; + }; + ftm: ftm@400b8000 { compatible = "fsl,ftm-timer"; reg = <0x400b8000 0x1000 0x400b9000 0x1000>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 6cc83d4c6c76..5e68c241ab8b 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -195,6 +195,8 @@ interrupts = <0 22 4>; clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; }; gem1: ethernet@e000c000 { @@ -204,6 +206,8 @@ interrupts = <0 45 4>; clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>; clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; }; sdhci0: sdhci@e0100000 { @@ -214,7 +218,7 @@ interrupt-parent = <&intc>; interrupts = <0 24 4>; reg = <0xe0100000 0x1000>; - } ; + }; sdhci1: sdhci@e0101000 { compatible = "arasan,sdhci-8.9a"; @@ -224,7 +228,7 @@ interrupt-parent = <&intc>; interrupts = <0 47 4>; reg = <0xe0101000 0x1000>; - } ; + }; slcr: slcr@f8000000 { #address-cells = <1>; @@ -256,6 +260,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0xf8003000 0x1000>; interrupt-parent = <&intc>; + interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3", + "dma4", "dma5", "dma6", "dma7"; interrupts = <0 13 4>, <0 14 4>, <0 15 4>, <0 16 4>, <0 17 4>, @@ -271,7 +277,7 @@ devcfg: devcfg@f8007000 { compatible = "xlnx,zynq-devcfg-1.0"; reg = <0xf8007000 0x100>; - } ; + }; global_timer: timer@f8f00200 { compatible = "arm,cortex-a9-global-timer"; @@ -303,6 +309,6 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xf8f00600 0x20>; clocks = <&clkc 4>; - } ; + }; }; }; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index 41afd9da6876..e1f51ca127fe 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -25,7 +25,7 @@ memory { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; }; chosen { @@ -38,8 +38,6 @@ status = "okay"; phy-mode = "rgmii-id"; phy-handle = <ðernet_phy>; - #address-cells = <1>; - #size-cells = <0>; ethernet_phy: ethernet-phy@0 { /* Marvell 88E1318 */ @@ -53,6 +51,29 @@ &i2c0 { status = "okay"; + + isl9305: isl9305@68 { + compatible = "isl,isl9305"; + reg = <0x68>; + + regulators { + dcd1 { + regulator-name = "VDD_DSP"; + regulator-always-on; + }; + dcd2 { + regulator-name = "1P35V"; + regulator-always-on; + }; + ldo1 { + regulator-name = "VDD_ADJ"; + }; + ldo2 { + regulator-name = "VDD_GPIO"; + regulator-always-on; + }; + }; + }; }; &sdhci1 { diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 835c3089c61c..94e2cda6f9b6 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. * * This software is licensed under the terms of the GNU General Public @@ -27,6 +27,15 @@ bootargs = "console=ttyPS0,115200 earlyprintk"; }; + leds { + compatible = "gpio-leds"; + + ds23 { + label = "ds23"; + gpios = <&gpio0 10 0>; + linux,default-trigger = "heartbeat"; + }; + }; }; &can0 { @@ -35,7 +44,12 @@ &gem0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + }; }; &i2c0 { diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 4cc9913078cd..a8bbdfbc7093 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -1,7 +1,6 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * Copyright (C) 2013 Xilinx * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -21,7 +20,7 @@ memory { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; }; chosen { @@ -32,7 +31,12 @@ &gem0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + }; }; &i2c0 { diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 82d7ef1a9a9c..697779a353ed 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -1,7 +1,6 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * Copyright (C) 2013 Xilinx * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -17,11 +16,11 @@ / { model = "Zynq Zed Development Board"; - compatible = "xlnx,zynq-7000"; + compatible = "xlnx,zynq-zed", "xlnx,zynq-7000"; memory { device_type = "memory"; - reg = <0 0x20000000>; + reg = <0x0 0x20000000>; }; chosen { @@ -32,7 +31,12 @@ &gem0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0>; + }; }; &sdhci0 { diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 63bde0efc041..e688741c89aa 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -21,8 +21,6 @@ CONFIG_ARCH_MULTI_V4T=y CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MXC=y -CONFIG_MXC_IRQ_PRIOR=y -CONFIG_ARCH_MX1ADS=y CONFIG_MACH_SCB9328=y CONFIG_MACH_APF9328=y CONFIG_MACH_MX21ADS=y @@ -30,10 +28,6 @@ CONFIG_MACH_MX25_3DS=y CONFIG_MACH_EUKREA_CPUIMX25SD=y CONFIG_MACH_IMX25_DT=y CONFIG_MACH_MX27ADS=y -CONFIG_MACH_PCM038=y -CONFIG_MACH_CPUIMX27=y -CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y -CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y CONFIG_MACH_MX27_3DS=y CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_PCA100=y @@ -43,8 +37,6 @@ CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y CONFIG_PM_DEBUG=y CONFIG_NET=y CONFIG_PACKET=y @@ -63,6 +55,7 @@ CONFIG_NETFILTER=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_IMX_WEIM=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -78,8 +71,8 @@ CONFIG_MTD_NAND_MXC=y CONFIG_MTD_UBI=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y -CONFIG_ATA=y CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y CONFIG_CS89x0=y @@ -102,10 +95,8 @@ CONFIG_SERIAL_8250=m CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y # CONFIG_HW_RANDOM is not set -CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_IMX=y -CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_SPI_SPIDEV=y CONFIG_GPIO_SYSFS=y @@ -132,10 +123,7 @@ CONFIG_VIDEO_CODA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_FB=y CONFIG_FB_IMX=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 16cfec4385c8..8fca6e276b69 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -32,8 +32,8 @@ CONFIG_MACH_IMX35_DT=y CONFIG_MACH_PCM043=y CONFIG_MACH_MX35_3DS=y CONFIG_MACH_VPR200=y -CONFIG_SOC_IMX51=y CONFIG_SOC_IMX50=y +CONFIG_SOC_IMX51=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y @@ -105,7 +105,6 @@ CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y @@ -153,14 +152,12 @@ CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_FSL_LPUART=y CONFIG_SERIAL_FSL_LPUART_CONSOLE=y CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_MXC_RNGA=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y # CONFIG_I2C_HELPER_AUTO is not set CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m CONFIG_I2C_IMX=y -CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MC9S08DZ60=y @@ -198,7 +195,6 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y CONFIG_LCD_PLATFORM=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y CONFIG_BACKLIGHT_GPIO=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -206,6 +202,7 @@ CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y +CONFIG_SND_SOC_FSL_SAI=y CONFIG_SND_IMX_SOC=y CONFIG_SND_SOC_PHYCORE_AC97=y CONFIG_SND_SOC_EUKREA_TLV320=y @@ -213,6 +210,7 @@ CONFIG_SND_SOC_IMX_WM8962=y CONFIG_SND_SOC_IMX_SGTL5000=y CONFIG_SND_SOC_IMX_SPDIF=y CONFIG_SND_SOC_IMX_MC13783=y +CONFIG_SND_SIMPLE_CARD=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y @@ -240,6 +238,7 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_ISL1208=y CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y @@ -254,7 +253,6 @@ CONFIG_DRM_IMX_FB_HELPER=y CONFIG_DRM_IMX_PARALLEL_DISPLAY=y CONFIG_DRM_IMX_TVE=y CONFIG_DRM_IMX_LDB=y -CONFIG_DRM_IMX_IPUV3_CORE=y CONFIG_DRM_IMX_IPUV3=y CONFIG_DRM_IMX_HDMI=y # CONFIG_IOMMU_SUPPORT is not set diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index fd43f7f55b70..79ecb4f34ffb 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -472,7 +472,6 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size) "mcr p15, 0, r0, c1, c0, 0 @ set SCTLR \n\t" \ "isb \n\t" \ "bl v7_flush_dcache_"__stringify(level)" \n\t" \ - "clrex \n\t" \ "mrc p15, 0, r0, c1, c0, 1 @ get ACTLR \n\t" \ "bic r0, r0, #(1 << 6) @ disable local coherency \n\t" \ "mcr p15, 0, r0, c1, c0, 1 @ set ACTLR \n\t" \ diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 963a2515906d..819777d0e91f 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -74,6 +74,7 @@ #define ARM_CPU_PART_CORTEX_A12 0x4100c0d0 #define ARM_CPU_PART_CORTEX_A17 0x4100c0e0 #define ARM_CPU_PART_CORTEX_A15 0x4100c0f0 +#define ARM_CPU_PART_MASK 0xff00fff0 #define ARM_CPU_XSCALE_ARCH_MASK 0xe000 #define ARM_CPU_XSCALE_ARCH_V1 0x2000 @@ -179,7 +180,7 @@ static inline unsigned int __attribute_const__ read_cpuid_implementor(void) */ static inline unsigned int __attribute_const__ read_cpuid_part(void) { - return read_cpuid_id() & 0xff00fff0; + return read_cpuid_id() & ARM_CPU_PART_MASK; } static inline unsigned int __attribute_const__ __deprecated read_cpuid_part_number(void) diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index f4b46d39b9cf..afb9cafd3786 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -50,6 +50,7 @@ typedef struct user_fp elf_fpregset_t; #define R_ARM_ABS32 2 #define R_ARM_CALL 28 #define R_ARM_JUMP24 29 +#define R_ARM_TARGET1 38 #define R_ARM_V4BX 40 #define R_ARM_PREL31 42 #define R_ARM_MOVW_ABS_NC 43 diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index a252c0bfacf5..0ad7d490ee6f 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -8,6 +8,7 @@ #include <linux/cpumask.h> #include <linux/err.h> +#include <asm/cpu.h> #include <asm/cputype.h> /* @@ -25,6 +26,20 @@ static inline bool is_smp(void) #endif } +/** + * smp_cpuid_part() - return part id for a given cpu + * @cpu: logical cpu id. + * + * Return: part id of logical cpu passed as argument. + */ +static inline unsigned int smp_cpuid_part(int cpu) +{ + struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpu); + + return is_smp() ? cpu_info->cpuid & ARM_CPU_PART_MASK : + read_cpuid_part(); +} + /* all SMP configurations have the extended CPUID registers */ #ifndef CONFIG_MMU #define tlb_ops_need_broadcast() 0 diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 8db307d0954b..2fdf8679b46e 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -208,26 +208,21 @@ #endif .endif msr spsr_cxsf, \rpsr -#if defined(CONFIG_CPU_V6) - ldr r0, [sp] - strex r1, r2, [sp] @ clear the exclusive monitor - ldmib sp, {r1 - pc}^ @ load r1 - pc, cpsr -#elif defined(CONFIG_CPU_32v6K) - clrex @ clear the exclusive monitor - ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr -#else - ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K) + @ We must avoid clrex due to Cortex-A15 erratum #830321 + sub r0, sp, #4 @ uninhabited address + strex r1, r2, [r0] @ clear the exclusive monitor #endif + ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr .endm .macro restore_user_regs, fast = 0, offset = 0 ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr ldr lr, [sp, #\offset + S_PC]! @ get pc msr spsr_cxsf, r1 @ save in spsr_svc -#if defined(CONFIG_CPU_V6) +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K) + @ We must avoid clrex due to Cortex-A15 erratum #830321 strex r1, r2, [sp] @ clear the exclusive monitor -#elif defined(CONFIG_CPU_32v6K) - clrex @ clear the exclusive monitor #endif .if \fast ldmdb sp, {r1 - lr}^ @ get calling r1 - lr @@ -261,7 +256,10 @@ .endif ldr lr, [sp, #S_SP] @ top of the stack ldrd r0, r1, [sp, #S_LR] @ calling lr and pc - clrex @ clear the exclusive monitor + + @ We must avoid clrex due to Cortex-A15 erratum #830321 + strex r2, r1, [sp, #S_LR] @ clear the exclusive monitor + stmdb lr!, {r0, r1, \rpsr} @ calling lr and rfe context ldmia sp, {r0 - r12} mov sp, lr @@ -282,13 +280,16 @@ .endm #else /* ifdef CONFIG_CPU_V7M */ .macro restore_user_regs, fast = 0, offset = 0 - clrex @ clear the exclusive monitor mov r2, sp load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr ldr lr, [sp, #\offset + S_PC] @ get pc add sp, sp, #\offset + S_SP msr spsr_cxsf, r1 @ save in spsr_svc + + @ We must avoid clrex due to Cortex-A15 erratum #830321 + strex r1, r2, [sp] @ clear the exclusive monitor + .if \fast ldmdb sp, {r1 - r12} @ get calling r1 - r12 .else diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 45e478157278..6a4dffefd357 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -91,6 +91,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, break; case R_ARM_ABS32: + case R_ARM_TARGET1: *(u32 *)loc += sym->st_value; break; diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index 075ec0576ada..70b2504cd6dc 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -46,30 +46,8 @@ static void __init at91_dt_init_irq(void) of_irq_init(irq_of_match); } -static int ksz9021rn_phy_fixup(struct phy_device *phy) -{ - int value; - - /* Set delay values */ - value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000; - phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); - value = 0xF2F4; - phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); - value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000; - phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); - value = 0x2222; - phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); - - return 0; -} - static void __init sama5_dt_device_init(void) { - if (of_machine_is_compatible("atmel,sama5d3xcm") && - IS_ENABLED(CONFIG_PHYLIB)) - phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, - ksz9021rn_phy_fixup); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 67c492aabf4d..b19a39652545 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -36,5 +36,4 @@ obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o ifeq ($(CONFIG_ARCH_BRCMSTB),y) obj-y += brcmstb.o -obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o endif diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h deleted file mode 100644 index ec0c3d112b36..000000000000 --- a/arch/arm/mach-bcm/brcmstb.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __BRCMSTB_H__ -#define __BRCMSTB_H__ - -void brcmstb_secondary_startup(void); - -#endif /* __BRCMSTB_H__ */ diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S deleted file mode 100644 index 199c1ea58248..000000000000 --- a/arch/arm/mach-bcm/headsmp-brcmstb.S +++ /dev/null @@ -1,33 +0,0 @@ -/* - * SMP boot code for secondary CPUs - * Based on arch/arm/mach-tegra/headsmp.S - * - * Copyright (C) 2010 NVIDIA, Inc. - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <asm/assembler.h> -#include <linux/linkage.h> -#include <linux/init.h> - - .section ".text.head", "ax" - -ENTRY(brcmstb_secondary_startup) - /* - * Ensure CPU is in a sane state by disabling all IRQs and switching - * into SVC mode. - */ - setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0 - - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(brcmstb_secondary_startup) diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c deleted file mode 100644 index af780e9c23a6..000000000000 --- a/arch/arm/mach-bcm/platsmp-brcmstb.c +++ /dev/null @@ -1,363 +0,0 @@ -/* - * Broadcom STB CPU SMP and hotplug support for ARM - * - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/of_address.h> -#include <linux/of_platform.h> -#include <linux/printk.h> -#include <linux/regmap.h> -#include <linux/smp.h> -#include <linux/mfd/syscon.h> -#include <linux/spinlock.h> - -#include <asm/cacheflush.h> -#include <asm/cp15.h> -#include <asm/mach-types.h> -#include <asm/smp_plat.h> - -#include "brcmstb.h" - -enum { - ZONE_MAN_CLKEN_MASK = BIT(0), - ZONE_MAN_RESET_CNTL_MASK = BIT(1), - ZONE_MAN_MEM_PWR_MASK = BIT(4), - ZONE_RESERVED_1_MASK = BIT(5), - ZONE_MAN_ISO_CNTL_MASK = BIT(6), - ZONE_MANUAL_CONTROL_MASK = BIT(7), - ZONE_PWR_DN_REQ_MASK = BIT(9), - ZONE_PWR_UP_REQ_MASK = BIT(10), - ZONE_BLK_RST_ASSERT_MASK = BIT(12), - ZONE_PWR_OFF_STATE_MASK = BIT(25), - ZONE_PWR_ON_STATE_MASK = BIT(26), - ZONE_DPG_PWR_STATE_MASK = BIT(28), - ZONE_MEM_PWR_STATE_MASK = BIT(29), - ZONE_RESET_STATE_MASK = BIT(31), - CPU0_PWR_ZONE_CTRL_REG = 1, - CPU_RESET_CONFIG_REG = 2, -}; - -static void __iomem *cpubiuctrl_block; -static void __iomem *hif_cont_block; -static u32 cpu0_pwr_zone_ctrl_reg; -static u32 cpu_rst_cfg_reg; -static u32 hif_cont_reg; - -#ifdef CONFIG_HOTPLUG_CPU -static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state); - -static int per_cpu_sw_state_rd(u32 cpu) -{ - sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); - return per_cpu(per_cpu_sw_state, cpu); -} - -static void per_cpu_sw_state_wr(u32 cpu, int val) -{ - per_cpu(per_cpu_sw_state, cpu) = val; - dmb(); - sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); - dsb_sev(); -} -#else -static inline void per_cpu_sw_state_wr(u32 cpu, int val) { } -#endif - -static void __iomem *pwr_ctrl_get_base(u32 cpu) -{ - void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg; - base += (cpu_logical_map(cpu) * 4); - return base; -} - -static u32 pwr_ctrl_rd(u32 cpu) -{ - void __iomem *base = pwr_ctrl_get_base(cpu); - return readl_relaxed(base); -} - -static void pwr_ctrl_wr(u32 cpu, u32 val) -{ - void __iomem *base = pwr_ctrl_get_base(cpu); - writel(val, base); -} - -static void cpu_rst_cfg_set(u32 cpu, int set) -{ - u32 val; - val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg); - if (set) - val |= BIT(cpu_logical_map(cpu)); - else - val &= ~BIT(cpu_logical_map(cpu)); - writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg); -} - -static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr) -{ - const int reg_ofs = cpu_logical_map(cpu) * 8; - writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs); - writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs); -} - -static void brcmstb_cpu_boot(u32 cpu) -{ - pr_info("SMP: Booting CPU%d...\n", cpu); - - /* - * set the reset vector to point to the secondary_startup - * routine - */ - cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup)); - - /* unhalt the cpu */ - cpu_rst_cfg_set(cpu, 0); -} - -static void brcmstb_cpu_power_on(u32 cpu) -{ - /* - * The secondary cores power was cut, so we must go through - * power-on initialization. - */ - u32 tmp; - - pr_info("SMP: Powering up CPU%d...\n", cpu); - - /* Request zone power up */ - pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK); - - /* Wait for the power up FSM to complete */ - do { - tmp = pwr_ctrl_rd(cpu); - } while (!(tmp & ZONE_PWR_ON_STATE_MASK)); - - per_cpu_sw_state_wr(cpu, 1); -} - -static int brcmstb_cpu_get_power_state(u32 cpu) -{ - int tmp = pwr_ctrl_rd(cpu); - return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1; -} - -#ifdef CONFIG_HOTPLUG_CPU - -static void brcmstb_cpu_die(u32 cpu) -{ - v7_exit_coherency_flush(all); - - /* Prevent all interrupts from reaching this CPU. */ - arch_local_irq_disable(); - - /* - * Final full barrier to ensure everything before this instruction has - * quiesced. - */ - isb(); - dsb(); - - per_cpu_sw_state_wr(cpu, 0); - - /* Sit and wait to die */ - wfi(); - - /* We should never get here... */ - panic("Spurious interrupt on CPU %d received!\n", cpu); -} - -static int brcmstb_cpu_kill(u32 cpu) -{ - u32 tmp; - - pr_info("SMP: Powering down CPU%d...\n", cpu); - - while (per_cpu_sw_state_rd(cpu)) - ; - - /* Program zone reset */ - pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK | - ZONE_PWR_DN_REQ_MASK); - - /* Verify zone reset */ - tmp = pwr_ctrl_rd(cpu); - if (!(tmp & ZONE_RESET_STATE_MASK)) - pr_err("%s: Zone reset bit for CPU %d not asserted!\n", - __func__, cpu); - - /* Wait for power down */ - do { - tmp = pwr_ctrl_rd(cpu); - } while (!(tmp & ZONE_PWR_OFF_STATE_MASK)); - - /* Settle-time from Broadcom-internal DVT reference code */ - udelay(7); - - /* Assert reset on the CPU */ - cpu_rst_cfg_set(cpu, 1); - - return 1; -} - -#endif /* CONFIG_HOTPLUG_CPU */ - -static int __init setup_hifcpubiuctrl_regs(struct device_node *np) -{ - int rc = 0; - char *name; - struct device_node *syscon_np = NULL; - - name = "syscon-cpu"; - - syscon_np = of_parse_phandle(np, name, 0); - if (!syscon_np) { - pr_err("can't find phandle %s\n", name); - rc = -EINVAL; - goto cleanup; - } - - cpubiuctrl_block = of_iomap(syscon_np, 0); - if (!cpubiuctrl_block) { - pr_err("iomap failed for cpubiuctrl_block\n"); - rc = -EINVAL; - goto cleanup; - } - - rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG, - &cpu0_pwr_zone_ctrl_reg); - if (rc) { - pr_err("failed to read 1st entry from %s property (%d)\n", name, - rc); - rc = -EINVAL; - goto cleanup; - } - - rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG, - &cpu_rst_cfg_reg); - if (rc) { - pr_err("failed to read 2nd entry from %s property (%d)\n", name, - rc); - rc = -EINVAL; - goto cleanup; - } - -cleanup: - if (syscon_np) - of_node_put(syscon_np); - - return rc; -} - -static int __init setup_hifcont_regs(struct device_node *np) -{ - int rc = 0; - char *name; - struct device_node *syscon_np = NULL; - - name = "syscon-cont"; - - syscon_np = of_parse_phandle(np, name, 0); - if (!syscon_np) { - pr_err("can't find phandle %s\n", name); - rc = -EINVAL; - goto cleanup; - } - - hif_cont_block = of_iomap(syscon_np, 0); - if (!hif_cont_block) { - pr_err("iomap failed for hif_cont_block\n"); - rc = -EINVAL; - goto cleanup; - } - - /* offset is at top of hif_cont_block */ - hif_cont_reg = 0; - -cleanup: - if (syscon_np) - of_node_put(syscon_np); - - return rc; -} - -static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus) -{ - int rc; - struct device_node *np; - char *name; - - name = "brcm,brcmstb-smpboot"; - np = of_find_compatible_node(NULL, NULL, name); - if (!np) { - pr_err("can't find compatible node %s\n", name); - return; - } - - rc = setup_hifcpubiuctrl_regs(np); - if (rc) - return; - - rc = setup_hifcont_regs(np); - if (rc) - return; -} - -static DEFINE_SPINLOCK(boot_lock); - -static void brcmstb_secondary_init(unsigned int cpu) -{ - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* Bring up power to the core if necessary */ - if (brcmstb_cpu_get_power_state(cpu) == 0) - brcmstb_cpu_power_on(cpu); - - brcmstb_cpu_boot(cpu); - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return 0; -} - -static struct smp_operations brcmstb_smp_ops __initdata = { - .smp_prepare_cpus = brcmstb_cpu_ctrl_setup, - .smp_secondary_init = brcmstb_secondary_init, - .smp_boot_secondary = brcmstb_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_kill = brcmstb_cpu_kill, - .cpu_die = brcmstb_cpu_die, -#endif -}; - -CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops); diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index ed1928740b5f..f703d82f08a8 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -46,6 +46,7 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL), OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1", NULL), + OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL), {} }; diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index b2f8b60cf0e9..dc9a764a7c37 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -43,7 +43,6 @@ "mcr p15, 0, r0, c1, c0, 0 @ set SCTLR\n\t" \ "isb\n\t"\ "bl v7_flush_dcache_"__stringify(level)"\n\t" \ - "clrex\n\t"\ "mrc p15, 0, r0, c1, c0, 1 @ get ACTLR\n\t" \ "bic r0, r0, #(1 << 6) @ disable local coherency\n\t" \ /* Dummy Load of a device register to avoid Erratum 799270 */ \ diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 9de84a215abd..11b2957f792b 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -69,6 +69,7 @@ config SOC_IMX1 select CPU_ARM920T select IMX_HAVE_IOMUX_V1 select MXC_AVIC + select PINCTRL_IMX1 config SOC_IMX21 bool @@ -85,7 +86,6 @@ config SOC_IMX25 config SOC_IMX27 bool - select ARCH_HAS_OPP select CPU_ARM926T select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -109,17 +109,6 @@ config SOC_IMX35 if ARCH_MULTI_V4T comment "MX1 platforms:" -config MACH_MXLADS - bool - -config ARCH_MX1ADS - bool "MX1ADS platform" - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select MACH_MXLADS - select SOC_IMX1 - help - Say Y here if you are using Motorola MX1ADS/MXLADS boards config MACH_SCB9328 bool "Synertronixx scb9328" @@ -136,6 +125,13 @@ config MACH_APF9328 help Say Yes here if you are using the Armadeus APF9328 development board +config MACH_IMX1_DT + bool "Support i.MX1 platforms from device tree" + select SOC_IMX1 + help + Include support for Freescale i.MX1 based platforms + using the device tree for discovery. + endif if ARCH_MULTI_V5 @@ -224,86 +220,6 @@ config MACH_MX27ADS Include support for MX27ADS platform. This includes specific configurations for the board and its peripherals. -config MACH_PCM038 - bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_W1 - select IMX_HAVE_PLATFORM_SPI_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX27 - help - Include support for phyCORE-i.MX27 (aka pcm038) platform. This - includes specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_PCM038 - default MACH_PCM970_BASEBOARD - -config MACH_PCM970_BASEBOARD - bool "PHYTEC PCM970 development board" - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_MXC_MMC - help - This adds board specific devices that can be found on Phytec's - PCM970 evaluation board. - -endchoice - -config MACH_CPUIMX27 - bool "Eukrea CPUIMX27 module" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_W1 - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX27 - help - Include support for Eukrea CPUIMX27 platform. This includes - specific configurations for the module and its peripherals. - -config MACH_EUKREA_CPUIMX27_USESDHC2 - bool "CPUIMX27 integrates SDHC2 module" - depends on MACH_CPUIMX27 - select IMX_HAVE_PLATFORM_MXC_MMC - help - This adds support for the internal SDHC2 used on CPUIMX27 - for wifi or eMMC. - -config MACH_EUKREA_CPUIMX27_USEUART4 - bool "CPUIMX27 integrates UART4 module" - depends on MACH_CPUIMX27 - help - This adds support for the internal UART4 used on CPUIMX27 - for bluetooth. - -choice - prompt "Baseboard" - depends on MACH_CPUIMX27 - default MACH_EUKREA_MBIMX27_BASEBOARD - -config MACH_EUKREA_MBIMX27_BASEBOARD - bool "Eukrea MBIMX27 development board" - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMX27 evaluation board. - -endchoice - config MACH_MX27_3DS bool "MX27PDK platform" select IMX_HAVE_PLATFORM_FSL_USB2_UDC @@ -360,18 +276,6 @@ config MACH_PCA100 Include support for phyCARD-s (aka pca100) platform. This includes specific configurations for the module and its peripherals. -config MACH_MXT_TD60 - bool "Maxtrack i-MXT TD60" - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select SOC_IMX27 - help - Include support for i-MXT (aka td60) platform. This - includes specific configurations for the module and its peripherals. - config MACH_IMX27_DT bool "Support i.MX27 platforms from device tree" select SOC_IMX27 @@ -659,7 +563,6 @@ comment "Device tree only" config SOC_IMX5 bool - select ARCH_HAS_OPP select HAVE_IMX_SRC select MXC_TZIC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index ac88599ca080..6e4fcd8339cd 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -16,7 +16,8 @@ obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o $(imx5-pm-y) obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o clk.o \ - clk-fixup-div.o clk-fixup-mux.o + clk-fixup-div.o clk-fixup-mux.o \ + clk-gate-exclusive.o obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o @@ -41,9 +42,9 @@ obj-y += ssi-fiq-ksym.o endif # i.MX1 based machines -obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o +obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o # i.MX21 based machines obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o @@ -56,14 +57,9 @@ obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o # i.MX27 based machines obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o -obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o -obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o -obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o -obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += mach-pca100.o -obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o # i.MX31 based machines @@ -93,9 +89,11 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o +ifdef CONFIG_SOC_IMX6 AFLAGS_headsmp.o :=-Wa,-march=armv7-a obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +endif obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index 4a40bbb46183..8259a625a920 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -104,6 +104,19 @@ void __init imx_init_revision_from_anatop(void) case 2: revision = IMX_CHIP_REVISION_1_2; break; + case 3: + revision = IMX_CHIP_REVISION_1_3; + break; + case 4: + revision = IMX_CHIP_REVISION_1_4; + break; + case 5: + /* + * i.MX6DQ TO1.5 is defined as Rev 1.3 in Data Sheet, marked + * as 'D' in Part Number last character. + */ + revision = IMX_CHIP_REVISION_1_5; + break; default: revision = IMX_CHIP_REVISION_UNKNOWN; } diff --git a/arch/arm/mach-imx/board-pcm038.h b/arch/arm/mach-imx/board-pcm038.h deleted file mode 100644 index 6f371e35753d..000000000000 --- a/arch/arm/mach-imx/board-pcm038.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__ -#define __ASM_ARCH_MXC_BOARD_PCM038_H__ - -#ifndef __ASSEMBLY__ -/* - * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls the baseboard's init function. - * TODO: Add your own baseboard init function and call it from - * inside pcm038_init(). - * - * This example here is for the development board. Refer pcm970-baseboard.c - */ - -extern void pcm970_baseboard_init(void); - -#endif - -#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */ diff --git a/arch/arm/mach-imx/clk-gate-exclusive.c b/arch/arm/mach-imx/clk-gate-exclusive.c new file mode 100644 index 000000000000..c12f5f2e04dc --- /dev/null +++ b/arch/arm/mach-imx/clk-gate-exclusive.c @@ -0,0 +1,94 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/slab.h> +#include "clk.h" + +/** + * struct clk_gate_exclusive - i.MX specific gate clock which is mutually + * exclusive with other gate clocks + * + * @gate: the parent class + * @exclusive_mask: mask of gate bits which are mutually exclusive to this + * gate clock + * + * The imx exclusive gate clock is a subclass of basic clk_gate + * with an addtional mask to indicate which other gate bits in the same + * register is mutually exclusive to this gate clock. + */ +struct clk_gate_exclusive { + struct clk_gate gate; + u32 exclusive_mask; +}; + +static int clk_gate_exclusive_enable(struct clk_hw *hw) +{ + struct clk_gate *gate = container_of(hw, struct clk_gate, hw); + struct clk_gate_exclusive *exgate = container_of(gate, + struct clk_gate_exclusive, gate); + u32 val = readl(gate->reg); + + if (val & exgate->exclusive_mask) + return -EBUSY; + + return clk_gate_ops.enable(hw); +} + +static void clk_gate_exclusive_disable(struct clk_hw *hw) +{ + clk_gate_ops.disable(hw); +} + +static int clk_gate_exclusive_is_enabled(struct clk_hw *hw) +{ + return clk_gate_ops.is_enabled(hw); +} + +static const struct clk_ops clk_gate_exclusive_ops = { + .enable = clk_gate_exclusive_enable, + .disable = clk_gate_exclusive_disable, + .is_enabled = clk_gate_exclusive_is_enabled, +}; + +struct clk *imx_clk_gate_exclusive(const char *name, const char *parent, + void __iomem *reg, u8 shift, u32 exclusive_mask) +{ + struct clk_gate_exclusive *exgate; + struct clk_gate *gate; + struct clk *clk; + struct clk_init_data init; + + if (exclusive_mask == 0) + return ERR_PTR(-EINVAL); + + exgate = kzalloc(sizeof(*exgate), GFP_KERNEL); + if (!exgate) + return ERR_PTR(-ENOMEM); + gate = &exgate->gate; + + init.name = name; + init.ops = &clk_gate_exclusive_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent ? &parent : NULL; + init.num_parents = parent ? 1 : 0; + + gate->reg = reg; + gate->bit_idx = shift; + gate->lock = &imx_ccm_lock; + gate->hw.init = &init; + exgate->exclusive_mask = exclusive_mask; + + clk = clk_register(NULL, &gate->hw); + if (IS_ERR(clk)) + kfree(exgate); + + return clk; +} diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 6cceb7765c14..1412daf4a714 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -64,7 +64,7 @@ static const char *cko2_sels[] = { "ipu2", "vdo_axi", "osc", "gpu2d_core", "gpu3d_core", "usdhc2", "ssi1", "ssi2", "ssi3", "gpu3d_shader", "vpu_axi", "can_root", - "ldb_di0", "ldb_di1", "esai", "eim_slow", + "ldb_di0", "ldb_di1", "esai_extal", "eim_slow", "uart_serial", "spdif", "asrc", "hsi_tx", }; static const char *cko_sels[] = { "cko1", "cko2", }; @@ -73,6 +73,14 @@ static const char *lvds_sels[] = { "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref", "pcie_ref_125m", "sata_ref_100m", }; +static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", "lvds2_in", "dummy", }; +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; static struct clk *clk[IMX6QDL_CLK_END]; static struct clk_onecell_data clk_data; @@ -107,6 +115,10 @@ static struct clk_div_table video_div_table[] = { }; static unsigned int share_count_esai; +static unsigned int share_count_asrc; +static unsigned int share_count_ssi1; +static unsigned int share_count_ssi2; +static unsigned int share_count_ssi3; static void __init imx6q_clocks_init(struct device_node *ccm_node) { @@ -119,6 +131,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0); clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0); clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0); + /* Clock source from external clock via CLK1/2 PADs */ + clk[IMX6QDL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0); + clk[IMX6QDL_CLK_ANACLK2] = imx_obtain_fixed_clock("anaclk2", 0); np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); base = of_iomap(np, 0); @@ -132,14 +147,47 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) video_div_table[2].div = 1; }; - /* type name parent_name base div_mask */ - clk[IMX6QDL_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); - clk[IMX6QDL_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); - clk[IMX6QDL_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3); - clk[IMX6QDL_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f); - clk[IMX6QDL_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); - clk[IMX6QDL_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); - clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3); + clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[IMX6QDL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[IMX6QDL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[IMX6QDL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[IMX6QDL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[IMX6QDL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[IMX6QDL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + + /* type name parent_name base div_mask */ + clk[IMX6QDL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); + clk[IMX6QDL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); + clk[IMX6QDL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); + clk[IMX6QDL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); + clk[IMX6QDL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); + clk[IMX6QDL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); + clk[IMX6QDL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); + + clk[IMX6QDL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); + clk[IMX6QDL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); + clk[IMX6QDL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); + clk[IMX6QDL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); + clk[IMX6QDL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); + clk[IMX6QDL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); + clk[IMX6QDL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); + + /* Do not bypass PLLs initially */ + clk_set_parent(clk[IMX6QDL_PLL1_BYPASS], clk[IMX6QDL_CLK_PLL1]); + clk_set_parent(clk[IMX6QDL_PLL2_BYPASS], clk[IMX6QDL_CLK_PLL2]); + clk_set_parent(clk[IMX6QDL_PLL3_BYPASS], clk[IMX6QDL_CLK_PLL3]); + clk_set_parent(clk[IMX6QDL_PLL4_BYPASS], clk[IMX6QDL_CLK_PLL4]); + clk_set_parent(clk[IMX6QDL_PLL5_BYPASS], clk[IMX6QDL_CLK_PLL5]); + clk_set_parent(clk[IMX6QDL_PLL6_BYPASS], clk[IMX6QDL_CLK_PLL6]); + clk_set_parent(clk[IMX6QDL_PLL7_BYPASS], clk[IMX6QDL_CLK_PLL7]); + + clk[IMX6QDL_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13); + clk[IMX6QDL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13); + clk[IMX6QDL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13); + clk[IMX6QDL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13); + clk[IMX6QDL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13); + clk[IMX6QDL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13); + clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13); /* * Bit 20 is the reserved and read-only bit, we do this only for: @@ -176,8 +224,11 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) * the "output_enable" bit as a gate, even though it's really just * enabling clock output. */ - clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10); - clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11); + clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate_exclusive("lvds1_gate", "lvds1_sel", base + 0x160, 10, BIT(12)); + clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate_exclusive("lvds2_gate", "lvds2_sel", base + 0x160, 11, BIT(13)); + + clk[IMX6QDL_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10)); + clk[IMX6QDL_CLK_LVDS2_IN] = imx_clk_gate_exclusive("lvds2_in", "anaclk2", base + 0x160, 13, BIT(11)); /* name parent_name reg idx */ clk[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); @@ -194,6 +245,11 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2); + clk[IMX6QDL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8); + if (cpu_is_imx6dl()) { + clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1); + clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1); + } clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock); @@ -217,8 +273,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[IMX6QDL_CLK_ASRC_SEL] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[IMX6QDL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); - clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); - clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + if (cpu_is_imx6q()) { + clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + } clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels)); clk[IMX6QDL_CLK_GPU3D_CORE_SEL] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels)); clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels)); @@ -311,7 +369,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) /* name parent_name reg shift */ clk[IMX6QDL_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4); - clk[IMX6QDL_CLK_ASRC] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6); + clk[IMX6QDL_CLK_ASRC] = imx_clk_gate2_shared("asrc", "asrc_podf", base + 0x68, 6, &share_count_asrc); + clk[IMX6QDL_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc); + clk[IMX6QDL_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc); clk[IMX6QDL_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14); clk[IMX6QDL_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16); clk[IMX6QDL_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18); @@ -325,8 +385,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) else clk[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8); clk[IMX6QDL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10); - clk[IMX6QDL_CLK_ESAI] = imx_clk_gate2_shared("esai", "esai_podf", base + 0x6c, 16, &share_count_esai); - clk[IMX6QDL_CLK_ESAI_AHB] = imx_clk_gate2_shared("esai_ahb", "ahb", base + 0x6c, 16, &share_count_esai); + clk[IMX6QDL_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai); + clk[IMX6QDL_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ipg", base + 0x6c, 16, &share_count_esai); + clk[IMX6QDL_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai); clk[IMX6QDL_CLK_GPT_IPG] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20); clk[IMX6QDL_CLK_GPT_IPG_PER] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22); if (cpu_is_imx6dl()) @@ -382,9 +443,12 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); clk[IMX6QDL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); clk[IMX6QDL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14); - clk[IMX6QDL_CLK_SSI1_IPG] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18); - clk[IMX6QDL_CLK_SSI2_IPG] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20); - clk[IMX6QDL_CLK_SSI3_IPG] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22); + clk[IMX6QDL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1); + clk[IMX6QDL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2); + clk[IMX6QDL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3); + clk[IMX6QDL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1); + clk[IMX6QDL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2); + clk[IMX6QDL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3); clk[IMX6QDL_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24); clk[IMX6QDL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26); clk[IMX6QDL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); @@ -398,6 +462,13 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7); clk[IMX6QDL_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24); + /* + * The gpt_3m clock is not available on i.MX6Q TO1.0. Let's point it + * to clock gpt_ipg_per to ease the gpt driver code. + */ + if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) + clk[IMX6QDL_CLK_GPT_3M] = clk[IMX6QDL_CLK_GPT_IPG_PER]; + imx_check_clocks(clk, ARRAY_SIZE(clk)); clk_data.clks = clk; diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index fef46faf692f..e982ebe10814 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -43,11 +43,13 @@ static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", }; static const char *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", }; -static const char *csi_lcdif_sels[] = { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", }; +static const char *csi_sels[] = { "osc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", }; +static const char *lcdif_axi_sels[] = { "pll2_bus", "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", }; static const char *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", }; static const char *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", }; static const char *perclk_sels[] = { "ipg", "osc", }; -static const char *epdc_pxp_sels[] = { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", }; +static const char *pxp_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd3", }; +static const char *epdc_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd2", }; static const char *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", }; static const char *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", }; static const char *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", }; @@ -55,6 +57,20 @@ static const char *epdc_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_d static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", }; static const char *ecspi_sels[] = { "pll3_60m", "osc", }; static const char *uart_sels[] = { "pll3_80m", "osc", }; +static const char *lvds_sels[] = { + "pll1_sys", "pll2_bus", "pll2_pfd0", "pll2_pfd1", "pll2_pfd2", "dummy", "pll4_audio", "pll5_video", + "dummy", "enet_ref", "dummy", "dummy", "pll3_usb_otg", "pll7_usb_host", "pll3_pfd0", "pll3_pfd1", + "pll3_pfd2", "pll3_pfd3", "osc", "dummy", "dummy", "dummy", "dummy", "dummy", + "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", +}; +static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", }; +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; static struct clk_div_table clk_enet_ref_table[] = { { .val = 0, .div = 20, }, @@ -79,6 +95,10 @@ static struct clk_div_table video_div_table[] = { { } }; +static unsigned int share_count_ssi1; +static unsigned int share_count_ssi2; +static unsigned int share_count_ssi3; + static struct clk *clks[IMX6SL_CLK_END]; static struct clk_onecell_data clk_data; static void __iomem *ccm_base; @@ -175,20 +195,59 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0); clks[IMX6SL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0); + /* Clock source from external clock via CLK1 PAD */ + clks[IMX6SL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0); np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop"); base = of_iomap(np, 0); WARN_ON(!base); anatop_base = base; - /* type name parent base div_mask */ - clks[IMX6SL_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); - clks[IMX6SL_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); - clks[IMX6SL_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3); - clks[IMX6SL_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f); - clks[IMX6SL_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); - clks[IMX6SL_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); - clks[IMX6SL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host", "osc", base + 0x20, 0x3); + clks[IMX6SL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + + /* type name parent_name base div_mask */ + clks[IMX6SL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); + clks[IMX6SL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); + clks[IMX6SL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); + clks[IMX6SL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); + clks[IMX6SL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); + clks[IMX6SL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); + clks[IMX6SL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); + + clks[IMX6SL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); + + /* Do not bypass PLLs initially */ + clk_set_parent(clks[IMX6SL_PLL1_BYPASS], clks[IMX6SL_CLK_PLL1]); + clk_set_parent(clks[IMX6SL_PLL2_BYPASS], clks[IMX6SL_CLK_PLL2]); + clk_set_parent(clks[IMX6SL_PLL3_BYPASS], clks[IMX6SL_CLK_PLL3]); + clk_set_parent(clks[IMX6SL_PLL4_BYPASS], clks[IMX6SL_CLK_PLL4]); + clk_set_parent(clks[IMX6SL_PLL5_BYPASS], clks[IMX6SL_CLK_PLL5]); + clk_set_parent(clks[IMX6SL_PLL6_BYPASS], clks[IMX6SL_CLK_PLL6]); + clk_set_parent(clks[IMX6SL_PLL7_BYPASS], clks[IMX6SL_CLK_PLL7]); + + clks[IMX6SL_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13); + clks[IMX6SL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13); + clks[IMX6SL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13); + clks[IMX6SL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13); + clks[IMX6SL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13); + clks[IMX6SL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13); + clks[IMX6SL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13); + + clks[IMX6SL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); + clks[IMX6SL_CLK_LVDS1_OUT] = imx_clk_gate_exclusive("lvds1_out", "lvds1_sel", base + 0x160, 10, BIT(12)); + clks[IMX6SL_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10)); /* * usbphy1 and usbphy2 are implemented as dummy gates using reserve @@ -241,8 +300,8 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) clks[IMX6SL_CLK_PRE_PERIPH_SEL] = imx_clk_mux("pre_periph_sel", base + 0x18, 18, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels)); clks[IMX6SL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); clks[IMX6SL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); - clks[IMX6SL_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_lcdif_sels, ARRAY_SIZE(csi_lcdif_sels)); - clks[IMX6SL_CLK_LCDIF_AXI_SEL] = imx_clk_mux("lcdif_axi_sel", base + 0x3c, 14, 2, csi_lcdif_sels, ARRAY_SIZE(csi_lcdif_sels)); + clks[IMX6SL_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels)); + clks[IMX6SL_CLK_LCDIF_AXI_SEL] = imx_clk_mux("lcdif_axi_sel", base + 0x3c, 14, 2, lcdif_axi_sels, ARRAY_SIZE(lcdif_axi_sels)); clks[IMX6SL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); clks[IMX6SL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); clks[IMX6SL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); @@ -251,8 +310,8 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) clks[IMX6SL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); clks[IMX6SL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); clks[IMX6SL_CLK_PERCLK_SEL] = imx_clk_fixup_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels), imx_cscmr1_fixup); - clks[IMX6SL_CLK_PXP_AXI_SEL] = imx_clk_mux("pxp_axi_sel", base + 0x34, 6, 3, epdc_pxp_sels, ARRAY_SIZE(epdc_pxp_sels)); - clks[IMX6SL_CLK_EPDC_AXI_SEL] = imx_clk_mux("epdc_axi_sel", base + 0x34, 15, 3, epdc_pxp_sels, ARRAY_SIZE(epdc_pxp_sels)); + clks[IMX6SL_CLK_PXP_AXI_SEL] = imx_clk_mux("pxp_axi_sel", base + 0x34, 6, 3, pxp_axi_sels, ARRAY_SIZE(pxp_axi_sels)); + clks[IMX6SL_CLK_EPDC_AXI_SEL] = imx_clk_mux("epdc_axi_sel", base + 0x34, 15, 3, epdc_axi_sels, ARRAY_SIZE(epdc_axi_sels)); clks[IMX6SL_CLK_GPU2D_OVG_SEL] = imx_clk_mux("gpu2d_ovg_sel", base + 0x18, 4, 2, gpu2d_ovg_sels, ARRAY_SIZE(gpu2d_ovg_sels)); clks[IMX6SL_CLK_GPU2D_SEL] = imx_clk_mux("gpu2d_sel", base + 0x18, 8, 2, gpu2d_sels, ARRAY_SIZE(gpu2d_sels)); clks[IMX6SL_CLK_LCDIF_PIX_SEL] = imx_clk_mux("lcdif_pix_sel", base + 0x38, 6, 3, lcdif_pix_sels, ARRAY_SIZE(lcdif_pix_sels)); @@ -337,9 +396,12 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) clks[IMX6SL_CLK_SDMA] = imx_clk_gate2("sdma", "ipg", base + 0x7c, 6); clks[IMX6SL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); clks[IMX6SL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif0_podf", base + 0x7c, 14); - clks[IMX6SL_CLK_SSI1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18); - clks[IMX6SL_CLK_SSI2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20); - clks[IMX6SL_CLK_SSI3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22); + clks[IMX6SL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1); + clks[IMX6SL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2); + clks[IMX6SL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3); + clks[IMX6SL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1); + clks[IMX6SL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2); + clks[IMX6SL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3); clks[IMX6SL_CLK_UART] = imx_clk_gate2("uart", "ipg", base + 0x7c, 24); clks[IMX6SL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_root", base + 0x7c, 26); clks[IMX6SL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); @@ -375,6 +437,13 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) /* Audio-related clocks configuration */ clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]); + /* set PLL5 video as lcdif pix parent clock */ + clk_set_parent(clks[IMX6SL_CLK_LCDIF_PIX_SEL], + clks[IMX6SL_CLK_PLL5_VIDEO_DIV]); + + clk_set_parent(clks[IMX6SL_CLK_LCDIF_AXI_SEL], + clks[IMX6SL_CLK_PLL2_PFD2]); + /* Set initial power mode */ imx6q_set_lpm(WAIT_CLOCKED); } diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c index ecde72bdfe88..17354a11356f 100644 --- a/arch/arm/mach-imx/clk-imx6sx.c +++ b/arch/arm/mach-imx/clk-imx6sx.c @@ -81,6 +81,14 @@ static const char *lvds_sels[] = { "arm", "pll1_sys", "dummy", "dummy", "dummy", "dummy", "dummy", "pll5_video_div", "dummy", "dummy", "pcie_ref_125m", "dummy", "usbphy1", "usbphy2", }; +static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", }; +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; static struct clk *clks[IMX6SX_CLK_CLK_END]; static struct clk_onecell_data clk_data; @@ -143,18 +151,54 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) clks[IMX6SX_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0"); clks[IMX6SX_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1"); + /* Clock source from external clock via CLK1 PAD */ + clks[IMX6SX_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop"); base = of_iomap(np, 0); WARN_ON(!base); - /* type name parent_name base div_mask */ - clks[IMX6SX_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); - clks[IMX6SX_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); - clks[IMX6SX_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3); - clks[IMX6SX_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f); - clks[IMX6SX_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); - clks[IMX6SX_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); - clks[IMX6SX_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host", "osc", base + 0x20, 0x3); + clks[IMX6SX_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SX_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SX_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SX_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SX_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SX_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SX_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + + /* type name parent_name base div_mask */ + clks[IMX6SX_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); + clks[IMX6SX_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); + clks[IMX6SX_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); + clks[IMX6SX_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); + clks[IMX6SX_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); + clks[IMX6SX_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); + clks[IMX6SX_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); + + clks[IMX6SX_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); + + /* Do not bypass PLLs initially */ + clk_set_parent(clks[IMX6SX_PLL1_BYPASS], clks[IMX6SX_CLK_PLL1]); + clk_set_parent(clks[IMX6SX_PLL2_BYPASS], clks[IMX6SX_CLK_PLL2]); + clk_set_parent(clks[IMX6SX_PLL3_BYPASS], clks[IMX6SX_CLK_PLL3]); + clk_set_parent(clks[IMX6SX_PLL4_BYPASS], clks[IMX6SX_CLK_PLL4]); + clk_set_parent(clks[IMX6SX_PLL5_BYPASS], clks[IMX6SX_CLK_PLL5]); + clk_set_parent(clks[IMX6SX_PLL6_BYPASS], clks[IMX6SX_CLK_PLL6]); + clk_set_parent(clks[IMX6SX_PLL7_BYPASS], clks[IMX6SX_CLK_PLL7]); + + clks[IMX6SX_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13); + clks[IMX6SX_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13); + clks[IMX6SX_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13); + clks[IMX6SX_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13); + clks[IMX6SX_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13); + clks[IMX6SX_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13); + clks[IMX6SX_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13); /* * Bit 20 is the reserved and read-only bit, we do this only for: @@ -176,7 +220,8 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5); clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19); - clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate("lvds1_out", "lvds1_sel", base + 0x160, 10); + clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate_exclusive("lvds1_out", "lvds1_sel", base + 0x160, 10, BIT(12)); + clks[IMX6SX_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10)); clks[IMX6SX_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, base + 0xe0, 0, 2, 0, clk_enet_ref_table, diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c index 61364050fccd..57de74da0acf 100644 --- a/arch/arm/mach-imx/clk-pllv3.c +++ b/arch/arm/mach-imx/clk-pllv3.c @@ -23,8 +23,6 @@ #define PLL_DENOM_OFFSET 0x20 #define BM_PLL_POWER (0x1 << 12) -#define BM_PLL_ENABLE (0x1 << 13) -#define BM_PLL_BYPASS (0x1 << 16) #define BM_PLL_LOCK (0x1 << 31) /** @@ -84,10 +82,6 @@ static int clk_pllv3_prepare(struct clk_hw *hw) if (ret) return ret; - val = readl_relaxed(pll->base); - val &= ~BM_PLL_BYPASS; - writel_relaxed(val, pll->base); - return 0; } @@ -97,7 +91,6 @@ static void clk_pllv3_unprepare(struct clk_hw *hw) u32 val; val = readl_relaxed(pll->base); - val |= BM_PLL_BYPASS; if (pll->powerup_set) val &= ~BM_PLL_POWER; else @@ -105,28 +98,6 @@ static void clk_pllv3_unprepare(struct clk_hw *hw) writel_relaxed(val, pll->base); } -static int clk_pllv3_enable(struct clk_hw *hw) -{ - struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 val; - - val = readl_relaxed(pll->base); - val |= BM_PLL_ENABLE; - writel_relaxed(val, pll->base); - - return 0; -} - -static void clk_pllv3_disable(struct clk_hw *hw) -{ - struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 val; - - val = readl_relaxed(pll->base); - val &= ~BM_PLL_ENABLE; - writel_relaxed(val, pll->base); -} - static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { @@ -169,8 +140,6 @@ static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate, static const struct clk_ops clk_pllv3_ops = { .prepare = clk_pllv3_prepare, .unprepare = clk_pllv3_unprepare, - .enable = clk_pllv3_enable, - .disable = clk_pllv3_disable, .recalc_rate = clk_pllv3_recalc_rate, .round_rate = clk_pllv3_round_rate, .set_rate = clk_pllv3_set_rate, @@ -225,8 +194,6 @@ static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate, static const struct clk_ops clk_pllv3_sys_ops = { .prepare = clk_pllv3_prepare, .unprepare = clk_pllv3_unprepare, - .enable = clk_pllv3_enable, - .disable = clk_pllv3_disable, .recalc_rate = clk_pllv3_sys_recalc_rate, .round_rate = clk_pllv3_sys_round_rate, .set_rate = clk_pllv3_sys_set_rate, @@ -299,8 +266,6 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate, static const struct clk_ops clk_pllv3_av_ops = { .prepare = clk_pllv3_prepare, .unprepare = clk_pllv3_unprepare, - .enable = clk_pllv3_enable, - .disable = clk_pllv3_disable, .recalc_rate = clk_pllv3_av_recalc_rate, .round_rate = clk_pllv3_av_round_rate, .set_rate = clk_pllv3_av_set_rate, @@ -315,8 +280,6 @@ static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw, static const struct clk_ops clk_pllv3_enet_ops = { .prepare = clk_pllv3_prepare, .unprepare = clk_pllv3_unprepare, - .enable = clk_pllv3_enable, - .disable = clk_pllv3_disable, .recalc_rate = clk_pllv3_enet_recalc_rate, }; diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c index f60d6d569ce3..a17818475050 100644 --- a/arch/arm/mach-imx/clk-vf610.c +++ b/arch/arm/mach-imx/clk-vf610.c @@ -58,6 +58,8 @@ #define PFD_PLL1_BASE (anatop_base + 0x2b0) #define PFD_PLL2_BASE (anatop_base + 0x100) #define PFD_PLL3_BASE (anatop_base + 0xf0) +#define PLL3_CTRL (anatop_base + 0x10) +#define PLL7_CTRL (anatop_base + 0x20) static void __iomem *anatop_base; static void __iomem *ccm_base; @@ -98,9 +100,15 @@ static struct clk_div_table pll4_main_div_table[] = { static struct clk *clk[VF610_CLK_END]; static struct clk_onecell_data clk_data; +static unsigned int const clks_init_on[] __initconst = { + VF610_CLK_SYS_BUS, + VF610_CLK_DDR_SEL, +}; + static void __init vf610_clocks_init(struct device_node *ccm_node) { struct device_node *np; + int i; clk[VF610_CLK_DUMMY] = imx_clk_fixed("dummy", 0); clk[VF610_CLK_SIRC_128K] = imx_clk_fixed("sirc_128k", 128000); @@ -148,6 +156,9 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6); /* pll6: default 960Mhz */ clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1); + /* pll7: USB1 PLL at 480MHz */ + clk[VF610_CLK_PLL7_MAIN] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_main", "fast_clk_sel", PLL7_CTRL, 0x2); + clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5); clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5); clk[VF610_CLK_SYS_SEL] = imx_clk_mux("sys_sel", CCM_CCSR, 0, 3, sys_sels, ARRAY_SIZE(sys_sels)); @@ -160,8 +171,11 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock); clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1); - clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "pll3_main", CCM_CCGR1, CCM_CCGRx_CGn(4)); - clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "pll3_main", CCM_CCGR7, CCM_CCGRx_CGn(4)); + clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_main", PLL3_CTRL, 6); + clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_main", PLL7_CTRL, 6); + + clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4)); + clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4)); clk[VF610_CLK_QSPI0_SEL] = imx_clk_mux("qspi0_sel", CCM_CSCMR1, 22, 2, qspi_sels, 4); clk[VF610_CLK_QSPI0_EN] = imx_clk_gate("qspi0_en", "qspi0_sel", CCM_CSCDR3, 4); @@ -322,6 +336,9 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk_set_parent(clk[VF610_CLK_SAI2_SEL], clk[VF610_CLK_AUDIO_EXT]); clk_set_parent(clk[VF610_CLK_SAI3_SEL], clk[VF610_CLK_AUDIO_EXT]); + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clk[clks_init_on[i]]); + /* Add the clocks to provider list */ clk_data.clks = clk; clk_data.clk_num = ARRAY_SIZE(clk); diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index d5ba76fee115..4cdf8b6a74e8 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -36,6 +36,9 @@ struct clk *clk_register_gate2(struct device *dev, const char *name, struct clk * imx_obtain_fixed_clock( const char *name, unsigned long rate); +struct clk *imx_clk_gate_exclusive(const char *name, const char *parent, + void __iomem *reg, u8 shift, u32 exclusive_mask); + static inline struct clk *imx_clk_gate2(const char *name, const char *parent, void __iomem *reg, u8 shift) { diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 22ba8973bcb9..1dabf435c592 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -98,11 +98,9 @@ void imx_set_cpu_arg(int cpu, u32 arg); void v7_secondary_startup(void); void imx_scu_map_io(void); void imx_smp_prepare(void); -void imx_scu_standby_enable(void); #else static inline void imx_scu_map_io(void) {} static inline void imx_smp_prepare(void) {} -static inline void imx_scu_standby_enable(void) {} #endif void imx_src_init(void); void imx_gpc_init(void); diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index 10844d3bb926..aa935787b743 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -66,10 +66,6 @@ static struct cpuidle_driver imx6q_cpuidle_driver = { int __init imx6q_cpuidle_init(void) { - /* Need to enable SCU standby for entering WAIT modes */ - if (!cpu_is_imx6sx()) - imx_scu_standby_enable(); - /* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */ imx6q_set_int_mem_clk_lpm(true); diff --git a/arch/arm/mach-imx/eukrea-baseboards.h b/arch/arm/mach-imx/eukrea-baseboards.h index a21d3313f994..bb2c90d65914 100644 --- a/arch/arm/mach-imx/eukrea-baseboards.h +++ b/arch/arm/mach-imx/eukrea-baseboards.h @@ -27,23 +27,15 @@ * This CPU module needs a baseboard to work. After basic initializing * its own devices, it calls baseboard's init function. * TODO: Add your own baseboard init function and call it from - * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init() - * eukrea_cpuimx35_init() eukrea_cpuimx51_init() - * or eukrea_cpuimx51sd_init(). + * inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init() * * This example here is for the development board. Refer * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25 - * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27 * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35 - * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51 - * mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd */ extern void eukrea_mbimxsd25_baseboard_init(void); -extern void eukrea_mbimx27_baseboard_init(void); extern void eukrea_mbimxsd35_baseboard_init(void); -extern void eukrea_mbimx51_baseboard_init(void); -extern void eukrea_mbimxsd51_baseboard_init(void); #endif diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c deleted file mode 100644 index b2f08bfbbdd3..000000000000 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ /dev/null @@ -1,351 +0,0 @@ -/* - * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com - * - * Based on pcm970-baseboard.c which is : - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/gpio.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/backlight.h> -#include <video/platform_lcd.h> - -#include <asm/mach/arch.h> - -#include "common.h" -#include "devices-imx27.h" -#include "hardware.h" -#include "iomux-mx27.h" - -static const int eukrea_mbimx27_pins[] __initconst = { - /* UART2 */ - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD, - /* UART3 */ - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS, - /* UART4 */ -#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD, -#endif - /* SDHC1*/ - PE18_PF_SD1_D0, - PE19_PF_SD1_D1, - PE20_PF_SD1_D2, - PE21_PF_SD1_D3, - PE22_PF_SD1_CMD, - PE23_PF_SD1_CLK, - /* display */ - PA5_PF_LSCLK, - PA6_PF_LD0, - PA7_PF_LD1, - PA8_PF_LD2, - PA9_PF_LD3, - PA10_PF_LD4, - PA11_PF_LD5, - PA12_PF_LD6, - PA13_PF_LD7, - PA14_PF_LD8, - PA15_PF_LD9, - PA16_PF_LD10, - PA17_PF_LD11, - PA18_PF_LD12, - PA19_PF_LD13, - PA20_PF_LD14, - PA21_PF_LD15, - PA22_PF_LD16, - PA23_PF_LD17, - PA28_PF_HSYNC, - PA29_PF_VSYNC, - PA30_PF_CONTRAST, - PA31_PF_OE_ACD, - /* SPI1 */ - PD29_PF_CSPI1_SCLK, - PD30_PF_CSPI1_MISO, - PD31_PF_CSPI1_MOSI, - /* SSI4 */ -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \ - || defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE) - PC16_PF_SSI4_FS, - PC17_PF_SSI4_RXD | GPIO_PUEN, - PC18_PF_SSI4_TXD | GPIO_PUEN, - PC19_PF_SSI4_CLK, -#endif -}; - -static const uint32_t eukrea_mbimx27_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(0, 1, KEY_DOWN), - KEY(1, 0, KEY_RIGHT), - KEY(1, 1, KEY_LEFT), -}; - -static const struct matrix_keymap_data -eukrea_mbimx27_keymap_data __initconst = { - .keymap = eukrea_mbimx27_keymap, - .keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap), -}; - -static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = { - { - .name = "led1", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = GPIO_PORTF | 16, - }, - { - .name = "led2", - .default_trigger = "none", - .active_low = 1, - .gpio = GPIO_PORTF | 19, - }, -}; - -static const struct gpio_led_platform_data - eukrea_mbimx27_gpio_led_info __initconst = { - .leds = eukrea_mbimx27_gpio_leds, - .num_leds = ARRAY_SIZE(eukrea_mbimx27_gpio_leds), -}; - -static struct imx_fb_videomode eukrea_mbimx27_modes[] = { - { - .mode = { - .name = "CMO-QVGA", - .refresh = 60, - .xres = 320, - .yres = 240, - .pixclock = 156000, - .hsync_len = 30, - .left_margin = 38, - .right_margin = 20, - .vsync_len = 3, - .upper_margin = 15, - .lower_margin = 4, - }, - .pcr = 0xFAD08B80, - .bpp = 16, - }, { - .mode = { - .name = "DVI-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 32000, - .hsync_len = 1, - .left_margin = 35, - .right_margin = 0, - .vsync_len = 1, - .upper_margin = 7, - .lower_margin = 0, - }, - .pcr = 0xFA208B80, - .bpp = 16, - }, { - .mode = { - .name = "DVI-SVGA", - .refresh = 60, - .xres = 800, - .yres = 600, - .pixclock = 25000, - .hsync_len = 1, - .left_margin = 35, - .right_margin = 0, - .vsync_len = 1, - .upper_margin = 7, - .lower_margin = 0, - }, - .pcr = 0xFA208B80, - .bpp = 16, - }, -}; - -static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = { - .mode = eukrea_mbimx27_modes, - .num_modes = ARRAY_SIZE(eukrea_mbimx27_modes), - - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00040060, -}; - -static void eukrea_mbimx27_bl_set_intensity(int intensity) -{ - if (intensity) - gpio_direction_output(GPIO_PORTE | 5, 1); - else - gpio_direction_output(GPIO_PORTE | 5, 0); -} - -static struct generic_bl_info eukrea_mbimx27_bl_info = { - .name = "eukrea_mbimx27-bl", - .max_intensity = 0xff, - .default_intensity = 0xff, - .set_bl_intensity = eukrea_mbimx27_bl_set_intensity, -}; - -static struct platform_device eukrea_mbimx27_bl_dev = { - .name = "generic-bl", - .id = 1, - .dev = { - .platform_data = &eukrea_mbimx27_bl_info, - }, -}; - -static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) - gpio_direction_output(GPIO_PORTA | 25, 1); - else - gpio_direction_output(GPIO_PORTA | 25, 0); -} - -static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = { - .set_power = eukrea_mbimx27_lcd_power_set, -}; - -static struct platform_device eukrea_mbimx27_lcd_powerdev = { - .name = "platform-lcd", - .dev.platform_data = &eukrea_mbimx27_lcd_power_data, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -#define ADS7846_PENDOWN (GPIO_PORTD | 25) - -static void __maybe_unused ads7846_dev_init(void) -{ - if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) { - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); - return; - } - gpio_direction_input(ADS7846_PENDOWN); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(ADS7846_PENDOWN); -} - -static struct ads7846_platform_data ads7846_config __initdata = { - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct spi_board_info __maybe_unused - eukrea_mbimx27_spi_board_info[] __initdata = { - [0] = { - .modalias = "ads7846", - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 1500000, - /* irq number is run-time assigned */ - .platform_data = &ads7846_config, - .mode = SPI_MODE_2, - }, -}; - -static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28}; - -static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = { - .chipselect = eukrea_mbimx27_spi_cs, - .num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs), -}; - -static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -static const struct imxmmc_platform_data sdhc_pdata __initconst = { - .dat3_card_detect = 1, -}; - -static const -struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = { - .flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE, -}; - -/* - * system init for baseboard usage. Will be called by cpuimx27 init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init eukrea_mbimx27_baseboard_init(void) -{ - mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins, - ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27"); - - imx27_add_imx_uart1(&uart_pdata); - imx27_add_imx_uart2(&uart_pdata); -#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) - imx27_add_imx_uart3(&uart_pdata); -#endif - - imx27_add_imx_fb(&eukrea_mbimx27_fb_data); - imx27_add_mxc_mmc(0, &sdhc_pdata); - - i2c_register_board_info(0, eukrea_mbimx27_i2c_devices, - ARRAY_SIZE(eukrea_mbimx27_i2c_devices)); - - imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata); - -#if defined(CONFIG_TOUCHSCREEN_ADS7846) \ - || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - /* ADS7846 Touchscreen controller init */ - mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN); - ads7846_dev_init(); -#endif - - /* SPI_CS0 init */ - mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); - imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data); - eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25)); - spi_register_board_info(eukrea_mbimx27_spi_board_info, - ARRAY_SIZE(eukrea_mbimx27_spi_board_info)); - - /* Leds configuration */ - mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT); - mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT); - /* Backlight */ - mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT); - gpio_request(GPIO_PORTE | 5, "backlight"); - platform_device_register(&eukrea_mbimx27_bl_dev); - /* LCD Reset */ - mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT); - gpio_request(GPIO_PORTA | 25, "lcd_enable"); - platform_device_register(&eukrea_mbimx27_lcd_powerdev); - - imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data); - - gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info); - imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); -} diff --git a/arch/arm/mach-imx/imx1-dt.c b/arch/arm/mach-imx/imx1-dt.c new file mode 100644 index 000000000000..6f915b0961c4 --- /dev/null +++ b/arch/arm/mach-imx/imx1-dt.c @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/of_platform.h> +#include <asm/mach/arch.h> + +#include "common.h" + +static const char * const imx1_dt_board_compat[] __initconst = { + "fsl,imx1", + NULL +}; + +DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)") + .map_io = mx1_map_io, + .init_early = imx1_init_early, + .init_irq = mx1_init_irq, + .dt_compat = imx1_dt_board_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index 7c66805d2cc0..1657fe64cd0f 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -64,7 +64,6 @@ int mxc_iomux_mode(unsigned int pin_mode) return ret; } -EXPORT_SYMBOL(mxc_iomux_mode); /* * This function configures the pad value for a IOMUX pin. @@ -90,7 +89,6 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) spin_unlock(&gpio_mux_lock); } -EXPORT_SYMBOL(mxc_iomux_set_pad); /* * allocs a single pin: @@ -116,7 +114,6 @@ int mxc_iomux_alloc_pin(unsigned int pin, const char *label) return 0; } -EXPORT_SYMBOL(mxc_iomux_alloc_pin); int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, const char *label) @@ -137,7 +134,6 @@ setup_error: mxc_iomux_release_multiple_pins(pin_list, i); return ret; } -EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins); void mxc_iomux_release_pin(unsigned int pin) { @@ -146,7 +142,6 @@ void mxc_iomux_release_pin(unsigned int pin) if (pad < (PIN_MAX + 1)) clear_bit(pad, mxc_pin_alloc_map); } -EXPORT_SYMBOL(mxc_iomux_release_pin); void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count) { @@ -158,7 +153,6 @@ void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count) p++; } } -EXPORT_SYMBOL(mxc_iomux_release_multiple_pins); /* * This function enables/disables the general purpose function for a particular @@ -178,4 +172,3 @@ void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en) __raw_writel(l, IOMUXGPR); spin_unlock(&gpio_mux_lock); } -EXPORT_SYMBOL(mxc_iomux_set_gpr); diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c index 2b156d1d9e21..ecd543664644 100644 --- a/arch/arm/mach-imx/iomux-v1.c +++ b/arch/arm/mach-imx/iomux-v1.c @@ -153,7 +153,6 @@ int mxc_gpio_mode(int gpio_mode) return 0; } -EXPORT_SYMBOL(mxc_gpio_mode); static int imx_iomuxv1_setup_multiple(const int *list, unsigned count) { @@ -178,7 +177,6 @@ int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, ret = imx_iomuxv1_setup_multiple(pin_list, count); return ret; } -EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins); int __init imx_iomuxv1_init(void __iomem *base, int numports) { diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c index 9dae74bf47fc..d61f9606fc56 100644 --- a/arch/arm/mach-imx/iomux-v3.c +++ b/arch/arm/mach-imx/iomux-v3.c @@ -55,7 +55,6 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad) return 0; } -EXPORT_SYMBOL(mxc_iomux_v3_setup_pad); int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count) { @@ -71,7 +70,6 @@ int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count) } return 0; } -EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads); void mxc_iomux_v3_init(void __iomem *iomux_v3_base) { diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index a7e9bd26a552..f2060523ba48 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -537,7 +537,7 @@ static void __init armadillo5x0_init(void) gpio_free(ARMADILLO5X0_RTC_GPIO); } if (armadillo5x0_i2c_rtc.irq == 0) - pr_warning("armadillo5x0_init: failed to get RTC IRQ\n"); + pr_warn("armadillo5x0_init: failed to get RTC IRQ\n"); i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1); /* USB */ diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c deleted file mode 100644 index e6d4b9929571..000000000000 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ /dev/null @@ -1,321 +0,0 @@ -/* - * Copyright (C) 2009 Eric Benard - eric@eukrea.com - * - * Based on pcm038.c which is : - * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/i2c.h> -#include <linux/io.h> -#include <linux/mtd/plat-ram.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx27.h" -#include "ehci.h" -#include "eukrea-baseboards.h" -#include "hardware.h" -#include "iomux-mx27.h" -#include "ulpi.h" - -static const int eukrea_cpuimx27_pins[] __initconst = { - /* UART1 */ - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS, - /* UART4 */ -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD, -#endif - /* FEC */ - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN, - /* I2C1 */ - PD17_PF_I2C_DATA, - PD18_PF_I2C_CLK, - /* SDHC2 */ -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) - PB4_PF_SD2_D0, - PB5_PF_SD2_D1, - PB6_PF_SD2_D2, - PB7_PF_SD2_D3, - PB8_PF_SD2_CMD, - PB9_PF_SD2_CLK, -#endif -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) - /* Quad UART's IRQ */ - GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN, - GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN, - GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN, - GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN, -#endif - /* OTG */ - PC7_PF_USBOTG_DATA5, - PC8_PF_USBOTG_DATA6, - PC9_PF_USBOTG_DATA0, - PC10_PF_USBOTG_DATA2, - PC11_PF_USBOTG_DATA1, - PC12_PF_USBOTG_DATA4, - PC13_PF_USBOTG_DATA3, - PE0_PF_USBOTG_NXT, - PE1_PF_USBOTG_STP, - PE2_PF_USBOTG_DIR, - PE24_PF_USBOTG_CLK, - PE25_PF_USBOTG_DATA7, - /* USBH2 */ - PA0_PF_USBH2_CLK, - PA1_PF_USBH2_DIR, - PA2_PF_USBH2_DATA7, - PA3_PF_USBH2_NXT, - PA4_PF_USBH2_STP, - PD19_AF_USBH2_DATA4, - PD20_AF_USBH2_DATA3, - PD21_AF_USBH2_DATA6, - PD22_AF_USBH2_DATA0, - PD23_AF_USBH2_DATA2, - PD24_AF_USBH2_DATA1, - PD26_AF_USBH2_DATA5, -}; - -static struct physmap_flash_data eukrea_cpuimx27_flash_data = { - .width = 2, -}; - -static struct resource eukrea_cpuimx27_flash_resource = { - .start = 0xc0000000, - .end = 0xc3ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device eukrea_cpuimx27_nor_mtd_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &eukrea_cpuimx27_flash_data, - }, - .num_resources = 1, - .resource = &eukrea_cpuimx27_flash_resource, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct mxc_nand_platform_data -cpuimx27_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static struct platform_device *platform_devices[] __initdata = { - &eukrea_cpuimx27_nor_mtd_device, -}; - -static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = { - .bitrate = 100000, -}; - -static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) -static struct plat_serial8250_port serial_platform_data[] = { - { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - } -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = serial_platform_data, - }, -}; -#endif - -static int eukrea_cpuimx27_otg_init(struct platform_device *pdev) -{ - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static struct mxc_usbh_platform_data otg_pdata __initdata = { - .init = eukrea_cpuimx27_otg_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev) -{ - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static struct mxc_usbh_platform_data usbh2_pdata __initdata = { - .init = eukrea_cpuimx27_usbh2_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -static bool otg_mode_host __initdata; - -static int __init eukrea_cpuimx27_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", eukrea_cpuimx27_otg_mode); - -static void __init eukrea_cpuimx27_init(void) -{ - imx27_soc_init(); - - mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins, - ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27"); - - imx27_add_imx_uart0(&uart_pdata); - - imx27_add_mxc_nand(&cpuimx27_nand_board_info); - - i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices, - ARRAY_SIZE(eukrea_cpuimx27_i2c_devices)); - - imx27_add_imx_i2c(0, &cpuimx27_i2c1_data); - - imx27_add_fec(NULL); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_imx2_wdt(); - imx27_add_mxc_w1(); - -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) - /* SDHC2 can be used for Wifi */ - imx27_add_mxc_mmc(1, NULL); -#endif -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) - /* in which case UART4 is also used for Bluetooth */ - imx27_add_imx_uart3(&uart_pdata); -#endif - -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) - serial_platform_data[0].irq = IMX_GPIO_NR(2, 23); - serial_platform_data[1].irq = IMX_GPIO_NR(2, 22); - serial_platform_data[2].irq = IMX_GPIO_NR(2, 27); - serial_platform_data[3].irq = IMX_GPIO_NR(2, 30); - platform_device_register(&serial_device); -#endif - - if (otg_mode_host) { - otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (otg_pdata.otg) - imx27_add_mxc_ehci_otg(&otg_pdata); - } else { - imx27_add_fsl_usb2_udc(&otg_device_pdata); - } - - usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (usbh2_pdata.otg) - imx27_add_mxc_ehci_hs(2, &usbh2_pdata); - -#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD - eukrea_mbimx27_baseboard_init(); -#endif -} - -static void __init eukrea_cpuimx27_timer_init(void) -{ - mx27_clocks_init(26000000); -} - -MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") - .atag_offset = 0x100, - .map_io = mx27_map_io, - .init_early = imx27_init_early, - .init_irq = mx27_init_irq, - .init_time = eukrea_cpuimx27_timer_init, - .init_machine = eukrea_cpuimx27_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c index 673a734165ba..3de3b7369aef 100644 --- a/arch/arm/mach-imx/mach-imx6sx.c +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -42,6 +42,9 @@ static void __init imx6sx_init_irq(void) static void __init imx6sx_init_late(void) { imx6q_cpuidle_init(); + + if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) + platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); } static const char * const imx6sx_dt_compat[] __initconst = { diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c deleted file mode 100644 index 77fda3de4290..000000000000 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * arch/arm/mach-imx/mach-mx1ads.c - * - * Initially based on: - * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c - * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de> - * - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/i2c.h> -#include <linux/i2c/pcf857x.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx1.h" -#include "hardware.h" -#include "iomux-mx1.h" - -static const int mx1ads_pins[] __initconst = { - /* UART1 */ - PC9_PF_UART1_CTS, - PC10_PF_UART1_RTS, - PC11_PF_UART1_TXD, - PC12_PF_UART1_RXD, - /* UART2 */ - PB28_PF_UART2_CTS, - PB29_PF_UART2_RTS, - PB30_PF_UART2_TXD, - PB31_PF_UART2_RXD, - /* I2C */ - PA15_PF_I2C_SDA, - PA16_PF_I2C_SCL, - /* SPI */ - PC13_PF_SPI1_SPI_RDY, - PC14_PF_SPI1_SCLK, - PC15_PF_SPI1_SS, - PC16_PF_SPI1_MISO, - PC17_PF_SPI1_MOSI, -}; - -/* - * UARTs platform data - */ - -static const struct imxuart_platform_data uart0_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxuart_platform_data uart1_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -/* - * Physmap flash - */ - -static const struct physmap_flash_data mx1ads_flash_data __initconst = { - .width = 4, /* bankwidth in bytes */ -}; - -static const struct resource flash_resource __initconst = { - .start = MX1_CS0_PHYS, - .end = MX1_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -/* - * I2C - */ -static struct pcf857x_platform_data pcf857x_data[] = { - { - .gpio_base = 4 * 32, - }, { - .gpio_base = 4 * 32 + 16, - } -}; - -static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = { - .bitrate = 100000, -}; - -static struct i2c_board_info mx1ads_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8575", 0x22), - .platform_data = &pcf857x_data[0], - }, { - I2C_BOARD_INFO("pcf8575", 0x24), - .platform_data = &pcf857x_data[1], - }, -}; - -/* - * Board init - */ -static void __init mx1ads_init(void) -{ - imx1_soc_init(); - - mxc_gpio_setup_multiple_pins(mx1ads_pins, - ARRAY_SIZE(mx1ads_pins), "mx1ads"); - - /* UART */ - imx1_add_imx_uart0(&uart0_pdata); - imx1_add_imx_uart1(&uart1_pdata); - - /* Physmap flash */ - platform_device_register_resndata(NULL, "physmap-flash", 0, - &flash_resource, 1, - &mx1ads_flash_data, sizeof(mx1ads_flash_data)); - - /* I2C */ - i2c_register_board_info(0, mx1ads_i2c_devices, - ARRAY_SIZE(mx1ads_i2c_devices)); - - imx1_add_imx_i2c(&mx1ads_i2c_data); -} - -static void __init mx1ads_timer_init(void) -{ - mx1_clocks_init(32000); -} - -MACHINE_START(MX1ADS, "Freescale MX1ADS") - /* Maintainer: Sascha Hauer, Pengutronix */ - .atag_offset = 0x100, - .map_io = mx1_map_io, - .init_early = imx1_init_early, - .init_irq = mx1_init_irq, - .init_time = mx1ads_timer_init, - .init_machine = mx1ads_init, - .restart = mxc_restart, -MACHINE_END - -MACHINE_START(MXLADS, "Freescale MXLADS") - .atag_offset = 0x100, - .map_io = mx1_map_io, - .init_early = imx1_init_early, - .init_irq = mx1_init_irq, - .init_time = mx1ads_timer_init, - .init_machine = mx1ads_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 453f41a2c5a9..65a0dc06a97c 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -307,7 +307,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev, ret = gpio_request_array(mx31_3ds_sdhc1_gpios, ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); if (ret) { - pr_warning("Unable to request the SD/MMC GPIOs.\n"); + pr_warn("Unable to request the SD/MMC GPIOs.\n"); return ret; } @@ -316,7 +316,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-detect", data); if (ret) { - pr_warning("Unable to request the SD/MMC card-detect IRQ.\n"); + pr_warn("Unable to request the SD/MMC card-detect IRQ.\n"); goto gpio_free; } diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index 57eac6f45fab..4822a1738de4 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -270,7 +270,7 @@ static void __init mx31lite_init(void) /* SMSC9117 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); if (ret) - pr_warning("could not get LAN irq gpio\n"); + pr_warn("could not get LAN irq gpio\n"); else { gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6)); smsc911x_resources[1].start = diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c deleted file mode 100644 index 0b5d1ca31b9f..000000000000 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ /dev/null @@ -1,273 +0,0 @@ -/* - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/i2c.h> -#include <linux/irq.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> -#include <linux/gpio.h> -#include <linux/platform_data/pca953x.h> - -#include "common.h" -#include "devices-imx27.h" -#include "hardware.h" -#include "iomux-mx27.h" - -static const int mxt_td60_pins[] __initconst = { - /* UART0 */ - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS, - /* UART1 */ - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD, - /* UART2 */ - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS, - /* FEC */ - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN, - /* I2C1 */ - PD17_PF_I2C_DATA, - PD18_PF_I2C_CLK, - /* I2C2 */ - PC5_PF_I2C2_SDA, - PC6_PF_I2C2_SCL, - /* FB */ - PA5_PF_LSCLK, - PA6_PF_LD0, - PA7_PF_LD1, - PA8_PF_LD2, - PA9_PF_LD3, - PA10_PF_LD4, - PA11_PF_LD5, - PA12_PF_LD6, - PA13_PF_LD7, - PA14_PF_LD8, - PA15_PF_LD9, - PA16_PF_LD10, - PA17_PF_LD11, - PA18_PF_LD12, - PA19_PF_LD13, - PA20_PF_LD14, - PA21_PF_LD15, - PA22_PF_LD16, - PA23_PF_LD17, - PA25_PF_CLS, - PA27_PF_SPL_SPR, - PA28_PF_HSYNC, - PA29_PF_VSYNC, - PA30_PF_CONTRAST, - PA31_PF_OE_ACD, - /* OWIRE */ - PE16_AF_OWIRE, - /* SDHC1*/ - PE18_PF_SD1_D0, - PE19_PF_SD1_D1, - PE20_PF_SD1_D2, - PE21_PF_SD1_D3, - PE22_PF_SD1_CMD, - PE23_PF_SD1_CLK, - PF8_AF_ATA_IORDY, - /* SDHC2*/ - PB4_PF_SD2_D0, - PB5_PF_SD2_D1, - PB6_PF_SD2_D2, - PB7_PF_SD2_D3, - PB8_PF_SD2_CMD, - PB9_PF_SD2_CLK, -}; - -static const struct mxc_nand_platform_data -mxt_td60_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static const struct imxi2c_platform_data mxt_td60_i2c0_data __initconst = { - .bitrate = 100000, -}; - -/* PCA9557 */ -static int mxt_td60_pca9557_setup(struct i2c_client *client, - unsigned gpio_base, unsigned ngpio, - void *context) -{ - static int mxt_td60_gpio_value[] = { - -1, -1, -1, -1, -1, -1, -1, 1 - }; - int n; - - for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) { - gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp"); - if (mxt_td60_gpio_value[n] < 0) - gpio_direction_input(gpio_base + n); - else - gpio_direction_output(gpio_base + n, - mxt_td60_gpio_value[n]); - gpio_export(gpio_base + n, 0); - } - - return 0; -} - -static struct pca953x_platform_data mxt_td60_pca9557_pdata = { - .gpio_base = 240, /* place PCA9557 after all MX27 gpio pins */ - .invert = 0, /* Do not invert */ - .setup = mxt_td60_pca9557_setup, -}; - -static struct i2c_board_info mxt_td60_i2c_devices[] = { - { - I2C_BOARD_INFO("pca9557", 0x18), - .platform_data = &mxt_td60_pca9557_pdata, - }, -}; - -static const struct imxi2c_platform_data mxt_td60_i2c1_data __initconst = { - .bitrate = 100000, -}; - -static struct i2c_board_info mxt_td60_i2c2_devices[] = { -}; - -static struct imx_fb_videomode mxt_td60_modes[] = { - { - .mode = { - .name = "Chimei LW700AT9003", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 30303, - .hsync_len = 64, - .left_margin = 0x67, - .right_margin = 0x68, - .vsync_len = 16, - .upper_margin = 0x0f, - .lower_margin = 0x0f, - }, - .bpp = 16, - .pcr = 0xFA208B83, - }, -}; - -static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = { - .mode = mxt_td60_modes, - .num_modes = ARRAY_SIZE(mxt_td60_modes), - - /* - * - HSYNC active high - * - VSYNC active high - * - clk notenabled while idle - * - clock inverted - * - data not inverted - * - data enable low active - * - enable sharp mode - */ - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00020010, -}; - -static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq, - void *data) -{ - return request_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), detect_irq, - IRQF_TRIGGER_FALLING, "sdhc1-card-detect", data); -} - -static void mxt_td60_sdhc1_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), data); -} - -static const struct imxmmc_platform_data sdhc1_pdata __initconst = { - .init = mxt_td60_sdhc1_init, - .exit = mxt_td60_sdhc1_exit, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static void __init mxt_td60_board_init(void) -{ - imx27_soc_init(); - - mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins), - "MXT_TD60"); - - imx27_add_imx_uart0(&uart_pdata); - imx27_add_imx_uart1(&uart_pdata); - imx27_add_imx_uart2(&uart_pdata); - imx27_add_mxc_nand(&mxt_td60_nand_board_info); - - i2c_register_board_info(0, mxt_td60_i2c_devices, - ARRAY_SIZE(mxt_td60_i2c_devices)); - - i2c_register_board_info(1, mxt_td60_i2c2_devices, - ARRAY_SIZE(mxt_td60_i2c2_devices)); - - imx27_add_imx_i2c(0, &mxt_td60_i2c0_data); - imx27_add_imx_i2c(1, &mxt_td60_i2c1_data); - imx27_add_imx_fb(&mxt_td60_fb_data); - imx27_add_mxc_mmc(0, &sdhc1_pdata); - imx27_add_fec(NULL); -} - -static void __init mxt_td60_timer_init(void) -{ - mx27_clocks_init(26000000); -} - -MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") - /* maintainer: Maxtrack Industrial */ - .atag_offset = 0x100, - .map_io = mx27_map_io, - .init_early = imx27_init_early, - .init_irq = mx27_init_irq, - .init_time = mxt_td60_timer_init, - .init_machine = mxt_td60_board_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 8eb1570f7851..6d879417db49 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -58,7 +58,7 @@ static int __init pcm037_variant_setup(char *str) if (!strcmp("eet", str)) pcm037_instance = PCM037_EET; else if (strcmp("pcm970", str)) - pr_warning("Unknown pcm037 baseboard variant %s\n", str); + pr_warn("Unknown pcm037 baseboard variant %s\n", str); return 1; } @@ -624,7 +624,7 @@ static void __init pcm037_init(void) /* LAN9217 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); if (ret) - pr_warning("could not get LAN irq gpio\n"); + pr_warn("could not get LAN irq gpio\n"); else { gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); smsc911x_resources[1].start = diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c deleted file mode 100644 index ee862ad6b6fc..000000000000 --- a/arch/arm/mach-imx/mach-pcm038.c +++ /dev/null @@ -1,358 +0,0 @@ -/* - * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/i2c.h> -#include <linux/platform_data/at24.h> -#include <linux/io.h> -#include <linux/mtd/plat-ram.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/regulator/machine.h> -#include <linux/mfd/mc13783.h> -#include <linux/spi/spi.h> -#include <linux/irq.h> -#include <linux/gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "board-pcm038.h" -#include "common.h" -#include "devices-imx27.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx27.h" -#include "ulpi.h" - -static const int pcm038_pins[] __initconst = { - /* UART1 */ - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS, - /* UART2 */ - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD, - /* UART3 */ - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS, - /* FEC */ - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN, - /* I2C2 */ - PC5_PF_I2C2_SDA, - PC6_PF_I2C2_SCL, - /* SPI1 */ - PD25_PF_CSPI1_RDY, - PD29_PF_CSPI1_SCLK, - PD30_PF_CSPI1_MISO, - PD31_PF_CSPI1_MOSI, - /* SSI1 */ - PC20_PF_SSI1_FS, - PC21_PF_SSI1_RXD, - PC22_PF_SSI1_TXD, - PC23_PF_SSI1_CLK, - /* SSI4 */ - PC16_PF_SSI4_FS, - PC17_PF_SSI4_RXD, - PC18_PF_SSI4_TXD, - PC19_PF_SSI4_CLK, - /* USB host */ - PA0_PF_USBH2_CLK, - PA1_PF_USBH2_DIR, - PA2_PF_USBH2_DATA7, - PA3_PF_USBH2_NXT, - PA4_PF_USBH2_STP, - PD19_AF_USBH2_DATA4, - PD20_AF_USBH2_DATA3, - PD21_AF_USBH2_DATA6, - PD22_AF_USBH2_DATA0, - PD23_AF_USBH2_DATA2, - PD24_AF_USBH2_DATA1, - PD26_AF_USBH2_DATA5, -}; - -/* - * Phytec's PCM038 comes with 2MiB battery buffered SRAM, - * 16 bit width - */ - -static struct platdata_mtd_ram pcm038_sram_data = { - .bankwidth = 2, -}; - -static struct resource pcm038_sram_resource = { - .start = MX27_CS1_BASE_ADDR, - .end = MX27_CS1_BASE_ADDR + 512 * 1024 - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm038_sram_mtd_device = { - .name = "mtd-ram", - .id = 0, - .dev = { - .platform_data = &pcm038_sram_data, - }, - .num_resources = 1, - .resource = &pcm038_sram_resource, -}; - -/* - * Phytec's phyCORE-i.MX27 comes with 32MiB flash, - * 16 bit width - */ -static struct physmap_flash_data pcm038_flash_data = { - .width = 2, -}; - -static struct resource pcm038_flash_resource = { - .start = 0xc0000000, - .end = 0xc1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm038_nor_mtd_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &pcm038_flash_data, - }, - .num_resources = 1, - .resource = &pcm038_flash_resource, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct mxc_nand_platform_data -pcm038_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static struct platform_device *platform_devices[] __initdata = { - &pcm038_nor_mtd_device, - &pcm038_sram_mtd_device, -}; - -/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and - * setup other stuffs to access the sram. */ -static void __init pcm038_init_sram(void) -{ - __raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1))); - __raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1))); - __raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1))); -} - -static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = { - .bitrate = 100000, -}; - -static struct at24_platform_data board_eeprom = { - .byte_len = 4096, - .page_size = 32, - .flags = AT24_FLAG_ADDR16, -}; - -static struct i2c_board_info pcm038_i2c_devices[] = { - { - I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ - .platform_data = &board_eeprom, - }, { - I2C_BOARD_INFO("pcf8563", 0x51), - }, { - I2C_BOARD_INFO("lm75", 0x4a), - } -}; - -static int pcm038_spi_cs[] = {GPIO_PORTD + 28}; - -static const struct spi_imx_master pcm038_spi0_data __initconst = { - .chipselect = pcm038_spi_cs, - .num_chipselect = ARRAY_SIZE(pcm038_spi_cs), -}; - -static struct regulator_consumer_supply sdhc1_consumers[] = { - { - .dev_name = "imx21-mmc.1", - .supply = "sdhc_vcc", - }, -}; - -static struct regulator_init_data sdhc1_data = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3400000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_FAST, - .always_on = 0, - .boot_on = 0, - }, - .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers), - .consumer_supplies = sdhc1_consumers, -}; - -static struct regulator_consumer_supply cam_consumers[] = { - { - .dev_name = NULL, - .supply = "imx_cam_vcc", - }, -}; - -static struct regulator_init_data cam_data = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3400000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_FAST, - .always_on = 0, - .boot_on = 0, - }, - .num_consumer_supplies = ARRAY_SIZE(cam_consumers), - .consumer_supplies = cam_consumers, -}; - -static struct mc13xxx_regulator_init_data pcm038_regulators[] = { - { - .id = MC13783_REG_VCAM, - .init_data = &cam_data, - }, { - .id = MC13783_REG_VMMC1, - .init_data = &sdhc1_data, - }, -}; - -static struct mc13xxx_platform_data pcm038_pmic = { - .regulators = { - .regulators = pcm038_regulators, - .num_regulators = ARRAY_SIZE(pcm038_regulators), - }, - .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN, -}; - -static struct spi_board_info pcm038_spi_board_info[] __initdata = { - { - .modalias = "mc13783", - /* irq number is run-time assigned */ - .max_speed_hz = 300000, - .bus_num = 0, - .chip_select = 0, - .platform_data = &pcm038_pmic, - .mode = SPI_CS_HIGH, - } -}; - -static int pcm038_usbh2_init(struct platform_device *pdev) -{ - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { - .init = pcm038_usbh2_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static void __init pcm038_init(void) -{ - imx27_soc_init(); - - mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), - "PCM038"); - - pcm038_init_sram(); - - imx27_add_imx_uart0(&uart_pdata); - imx27_add_imx_uart1(&uart_pdata); - imx27_add_imx_uart2(&uart_pdata); - - mxc_gpio_mode(PE16_AF_OWIRE); - imx27_add_mxc_nand(&pcm038_nand_board_info); - - /* only the i2c master 1 is used on this CPU card */ - i2c_register_board_info(1, pcm038_i2c_devices, - ARRAY_SIZE(pcm038_i2c_devices)); - - imx27_add_imx_i2c(1, &pcm038_i2c1_data); - - /* PE18 for user-LED D40 */ - mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT); - - mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); - - /* MC13783 IRQ */ - mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN); - - imx27_add_spi_imx0(&pcm038_spi0_data); - pcm038_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(2, 23)); - spi_register_board_info(pcm038_spi_board_info, - ARRAY_SIZE(pcm038_spi_board_info)); - - imx27_add_mxc_ehci_hs(2, &usbh2_pdata); - - imx27_add_fec(NULL); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_imx2_wdt(); - imx27_add_mxc_w1(); - -#ifdef CONFIG_MACH_PCM970_BASEBOARD - pcm970_baseboard_init(); -#endif -} - -static void __init pcm038_timer_init(void) -{ - mx27_clocks_init(26000000); -} - -MACHINE_START(PCM038, "phyCORE-i.MX27") - .atag_offset = 0x100, - .map_io = mx27_map_io, - .init_early = imx27_init_early, - .init_irq = mx27_init_irq, - .init_time = pcm038_timer_init, - .init_machine = pcm038_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index a39b69ef4301..17a41ca65acf 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -43,6 +43,8 @@ #define IMX_CHIP_REVISION_1_1 0x11 #define IMX_CHIP_REVISION_1_2 0x12 #define IMX_CHIP_REVISION_1_3 0x13 +#define IMX_CHIP_REVISION_1_4 0x14 +#define IMX_CHIP_REVISION_1_5 0x15 #define IMX_CHIP_REVISION_2_0 0x20 #define IMX_CHIP_REVISION_2_1 0x21 #define IMX_CHIP_REVISION_2_2 0x22 diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c deleted file mode 100644 index 51c608234089..000000000000 --- a/arch/arm/mach-imx/pcm970-baseboard.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/gpio.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/can/platform/sja1000.h> - -#include <asm/mach/arch.h> - -#include "common.h" -#include "devices-imx27.h" -#include "hardware.h" -#include "iomux-mx27.h" - -static const int pcm970_pins[] __initconst = { - /* SDHC */ - PB4_PF_SD2_D0, - PB5_PF_SD2_D1, - PB6_PF_SD2_D2, - PB7_PF_SD2_D3, - PB8_PF_SD2_CMD, - PB9_PF_SD2_CLK, - /* display */ - PA5_PF_LSCLK, - PA6_PF_LD0, - PA7_PF_LD1, - PA8_PF_LD2, - PA9_PF_LD3, - PA10_PF_LD4, - PA11_PF_LD5, - PA12_PF_LD6, - PA13_PF_LD7, - PA14_PF_LD8, - PA15_PF_LD9, - PA16_PF_LD10, - PA17_PF_LD11, - PA18_PF_LD12, - PA19_PF_LD13, - PA20_PF_LD14, - PA21_PF_LD15, - PA22_PF_LD16, - PA23_PF_LD17, - PA24_PF_REV, - PA25_PF_CLS, - PA26_PF_PS, - PA27_PF_SPL_SPR, - PA28_PF_HSYNC, - PA29_PF_VSYNC, - PA30_PF_CONTRAST, - PA31_PF_OE_ACD, - /* - * it seems the data line misses a pullup, so we must enable - * the internal pullup as a local workaround - */ - PD17_PF_I2C_DATA | GPIO_PUEN, - PD18_PF_I2C_CLK, - /* Camera */ - PB10_PF_CSI_D0, - PB11_PF_CSI_D1, - PB12_PF_CSI_D2, - PB13_PF_CSI_D3, - PB14_PF_CSI_D4, - PB15_PF_CSI_MCLK, - PB16_PF_CSI_PIXCLK, - PB17_PF_CSI_D5, - PB18_PF_CSI_D6, - PB19_PF_CSI_D7, - PB20_PF_CSI_VSYNC, - PB21_PF_CSI_HSYNC, -}; - -static int pcm970_sdhc2_get_ro(struct device *dev) -{ - return gpio_get_value(GPIO_PORTC + 28); -} - -static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data) -{ - int ret; - - ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq, - IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); - if (ret) - return ret; - - ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro"); - if (ret) { - free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data); - return ret; - } - - gpio_direction_input(GPIO_PORTC + 28); - - return 0; -} - -static void pcm970_sdhc2_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data); - gpio_free(GPIO_PORTC + 28); -} - -static const struct imxmmc_platform_data sdhc_pdata __initconst = { - .get_ro = pcm970_sdhc2_get_ro, - .init = pcm970_sdhc2_init, - .exit = pcm970_sdhc2_exit, -}; - -static struct imx_fb_videomode pcm970_modes[] = { - { - .mode = { - .name = "Sharp-LQ035Q7", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 188679, /* in ps (5.3MHz) */ - .hsync_len = 7, - .left_margin = 5, - .right_margin = 16, - .vsync_len = 1, - .upper_margin = 7, - .lower_margin = 9, - }, - /* - * - HSYNC active high - * - VSYNC active high - * - clk notenabled while idle - * - clock not inverted - * - data not inverted - * - data enable low active - * - enable sharp mode - */ - .pcr = 0xF00080C0, - .bpp = 16, - }, { - .mode = { - .name = "TX090", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 38255, - .left_margin = 144, - .right_margin = 0, - .upper_margin = 7, - .lower_margin = 40, - .hsync_len = 96, - .vsync_len = 1, - }, - /* - * - HSYNC active low (1 << 22) - * - VSYNC active low (1 << 23) - * - clk notenabled while idle - * - clock not inverted - * - data not inverted - * - data enable low active - * - enable sharp mode - */ - .pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19), - .bpp = 32, - }, -}; - -static const struct imx_fb_platform_data pcm038_fb_data __initconst = { - .mode = pcm970_modes, - .num_modes = ARRAY_SIZE(pcm970_modes), - - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00020010, -}; - -static struct resource pcm970_sja1000_resources[] = { - { - .start = MX27_CS4_BASE_ADDR, - .end = MX27_CS4_BASE_ADDR + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct sja1000_platform_data pcm970_sja1000_platform_data = { - .osc_freq = 16000000, - .ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL, - .cdr = CDR_CBP, -}; - -static struct platform_device pcm970_sja1000 = { - .name = "sja1000_platform", - .dev = { - .platform_data = &pcm970_sja1000_platform_data, - }, - .resource = pcm970_sja1000_resources, - .num_resources = ARRAY_SIZE(pcm970_sja1000_resources), -}; - -/* - * system init for baseboard usage. Will be called by pcm038 init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init pcm970_baseboard_init(void) -{ - mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins), - "PCM970"); - - imx27_add_imx_fb(&pcm038_fb_data); - mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN); - imx27_add_mxc_mmc(1, &sdhc_pdata); - pcm970_sja1000_resources[1].start = gpio_to_irq(IMX_GPIO_NR(5, 19)); - pcm970_sja1000_resources[1].end = gpio_to_irq(IMX_GPIO_NR(5, 19)); - platform_device_register(&pcm970_sja1000); -} diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 5b57c17c06bd..771bd25c1025 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -20,8 +20,6 @@ #include "common.h" #include "hardware.h" -#define SCU_STANDBY_ENABLE (1 << 5) - u32 g_diag_reg; static void __iomem *scu_base; @@ -45,14 +43,6 @@ void __init imx_scu_map_io(void) scu_base = IMX_IO_ADDRESS(base); } -void imx_scu_standby_enable(void) -{ - u32 val = readl_relaxed(scu_base); - - val |= SCU_STANDBY_ENABLE; - writel_relaxed(val, scu_base); -} - static int imx_boot_secondary(unsigned int cpu, struct task_struct *idle) { imx_set_cpu_jump(cpu, v7_secondary_startup); diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 74b50f1982db..ca4ea2daf25b 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -173,6 +173,8 @@ ENTRY(imx6_suspend) ldr r6, [r11, #0x0] ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] ldr r6, [r11, #0x0] + ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] + ldr r6, [r11, #0x0] /* use r11 to store the IO address */ ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET] diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index bf92e5a351c0..15d18e198303 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -60,17 +60,22 @@ #define MX2_TSTAT_CAPT (1 << 1) #define MX2_TSTAT_COMP (1 << 0) -/* MX31, MX35, MX25, MX5 */ +/* MX31, MX35, MX25, MX5, MX6 */ #define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */ #define V2_TCTL_CLK_IPG (1 << 6) #define V2_TCTL_CLK_PER (2 << 6) +#define V2_TCTL_CLK_OSC_DIV8 (5 << 6) #define V2_TCTL_FRR (1 << 9) +#define V2_TCTL_24MEN (1 << 10) +#define V2_TPRER_PRE24M 12 #define V2_IR 0x0c #define V2_TSTAT 0x08 #define V2_TSTAT_OF1 (1 << 0) #define V2_TCN 0x24 #define V2_TCMP 0x10 +#define V2_TIMER_RATE_OSC_DIV8 3000000 + #define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) #define timer_is_v2() (!timer_is_v1()) @@ -312,10 +317,22 @@ static void __init _mxc_timer_init(int irq, __raw_writel(0, timer_base + MXC_TCTL); __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ - if (timer_is_v2()) - tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; - else + if (timer_is_v2()) { + tctl_val = V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; + if (clk_get_rate(clk_per) == V2_TIMER_RATE_OSC_DIV8) { + tctl_val |= V2_TCTL_CLK_OSC_DIV8; + if (cpu_is_imx6dl() || cpu_is_imx6sx()) { + /* 24 / 8 = 3 MHz */ + __raw_writel(7 << V2_TPRER_PRE24M, + timer_base + MXC_TPRER); + tctl_val |= V2_TCTL_24MEN; + } + } else { + tctl_val |= V2_TCTL_CLK_PER; + } + } else { tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; + } __raw_writel(tctl_val, timer_base + MXC_TCTL); @@ -349,9 +366,13 @@ static void __init mxc_timer_init_dt(struct device_node *np) WARN_ON(!timer_base); irq = irq_of_parse_and_map(np, 0); - clk_per = of_clk_get_by_name(np, "per"); clk_ipg = of_clk_get_by_name(np, "ipg"); + /* Try osc_per first, and fall back to per otherwise */ + clk_per = of_clk_get_by_name(np, "osc_per"); + if (IS_ERR(clk_per)) + clk_per = of_clk_get_by_name(np, "per"); + _mxc_timer_init(irq, clk_per, clk_ipg); } CLOCKSOURCE_OF_DECLARE(mx1_timer, "fsl,imx1-gpt", mxc_timer_init_dt); diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index e87f2a83d6bf..2d245c2e641c 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, board_nand_data.nr_parts = nr_parts; board_nand_data.devsize = nand_type; - board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW; + board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW; gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 9480997ba616..bdb5194147d4 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -241,6 +241,8 @@ MACHINE_END #ifdef CONFIG_SOC_DRA7XX static const char *dra74x_boards_compat[] __initconst = { + "ti,am5728", + "ti,am5726", "ti,dra742", "ti,dra7", NULL, @@ -260,6 +262,8 @@ DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)") MACHINE_END static const char *dra72x_boards_compat[] __initconst = { + "ti,am5718", + "ti,am5716", "ti,dra722", NULL, }; diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 8897ad7035fd..cb7764314f17 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -49,7 +49,8 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) return 0; /* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */ - if (ecc_opt == OMAP_ECC_HAM1_CODE_HW) + if (ecc_opt == OMAP_ECC_HAM1_CODE_HW || + ecc_opt == OMAP_ECC_HAM1_CODE_SW) return 1; else return 0; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 8bc13380f0a0..9f42d5437fcc 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1403,8 +1403,11 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, pr_err("%s: ti,nand-ecc-opt not found\n", __func__); return -ENODEV; } - if (!strcmp(s, "ham1") || !strcmp(s, "sw") || - !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) + + if (!strcmp(s, "sw")) + gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_SW; + else if (!strcmp(s, "ham1") || + !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_HW; else if (!strcmp(s, "bch4")) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index d42022f2a71e..53841dea80ea 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -663,7 +663,7 @@ void __init dra7xxx_check_revision(void) default: /* Unknown default to latest silicon rev as default*/ - pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n", + pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n", __func__, idcode, hawkeye, rev); omap_revision = DRA752_REV_ES1_1; } diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 01ef59def44b..d22c30d3ccfa 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -56,7 +56,7 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias, r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias); if (!IS_ERR(r)) { - dev_warn(&od->pdev->dev, + dev_dbg(&od->pdev->dev, "alias %s already exists\n", clk_alias); clk_put(r); return; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6c074f37cdd2..8fd87a3055bf 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2185,6 +2185,8 @@ static int _enable(struct omap_hwmod *oh) oh->mux->pads_dynamic))) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED); _reconfigure_io_chain(); + } else if (oh->flags & HWMOD_FORCE_MSTANDBY) { + _reconfigure_io_chain(); } _add_initiator_dep(oh, mpu_oh); @@ -2291,6 +2293,8 @@ static int _idle(struct omap_hwmod *oh) if (oh->mux && oh->mux->pads_dynamic) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE); _reconfigure_io_chain(); + } else if (oh->flags & HWMOD_FORCE_MSTANDBY) { + _reconfigure_io_chain(); } oh->_state = _HWMOD_STATE_IDLE; @@ -3345,6 +3349,9 @@ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois) if (!ois) return 0; + if (ois[0] == NULL) /* Empty list */ + return 0; + if (!linkspace) { if (_alloc_linkspace(ois)) { pr_err("omap_hwmod: could not allocate link space\n"); diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 2757abf87fbc..5684f112654b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -35,6 +35,7 @@ #include "i2c.h" #include "mmc.h" #include "wd_timer.h" +#include "soc.h" /* Base offset for all DRA7XX interrupts external to MPUSS */ #define DRA7XX_IRQ_GIC_START 32 @@ -3261,7 +3262,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per3__usb_otg_ss1, &dra7xx_l4_per3__usb_otg_ss2, &dra7xx_l4_per3__usb_otg_ss3, - &dra7xx_l4_per3__usb_otg_ss4, &dra7xx_l3_main_1__vcp1, &dra7xx_l4_per2__vcp1, &dra7xx_l3_main_1__vcp2, @@ -3270,8 +3270,26 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { NULL, }; +static struct omap_hwmod_ocp_if *dra74x_hwmod_ocp_ifs[] __initdata = { + &dra7xx_l4_per3__usb_otg_ss4, + NULL, +}; + +static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = { + NULL, +}; + int __init dra7xx_hwmod_init(void) { + int ret; + omap_hwmod_init(); - return omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs); + ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs); + + if (!ret && soc_is_dra74x()) + return omap_hwmod_register_links(dra74x_hwmod_ocp_ifs); + else if (!ret && soc_is_dra72x()) + return omap_hwmod_register_links(dra72x_hwmod_ocp_ifs); + + return ret; } diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 90c88d498485..b9d091b4d983 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -253,6 +253,11 @@ static void __init nokia_n900_legacy_init(void) } } + +static void __init omap3_tao3530_legacy_init(void) +{ + hsmmc2_internal_input_clk(); +} #endif /* CONFIG_ARCH_OMAP3 */ #ifdef CONFIG_ARCH_OMAP4 @@ -377,6 +382,7 @@ static struct pdata_init pdata_quirks[] __initdata = { { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,omap3-zoom3", omap3_zoom_legacy_init, }, { "ti,am3517-evm", am3517_evm_legacy_init, }, + { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, }, #endif #ifdef CONFIG_ARCH_OMAP4 { "ti,omap4-sdp", omap4_sdp_legacy_init, }, diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 01ca8086fb6c..4376f59626d1 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -245,6 +245,8 @@ IS_AM_SUBCLASS(437x, 0x437) #define soc_is_omap54xx() 0 #define soc_is_omap543x() 0 #define soc_is_dra7xx() 0 +#define soc_is_dra74x() 0 +#define soc_is_dra72x() 0 #if defined(MULTI_OMAP2) # if defined(CONFIG_ARCH_OMAP2) @@ -393,7 +395,11 @@ IS_OMAP_TYPE(3430, 0x3430) #if defined(CONFIG_SOC_DRA7XX) #undef soc_is_dra7xx +#undef soc_is_dra74x +#undef soc_is_dra72x #define soc_is_dra7xx() (of_machine_is_compatible("ti,dra7")) +#define soc_is_dra74x() (of_machine_is_compatible("ti,dra74")) +#define soc_is_dra72x() (of_machine_is_compatible("ti,dra72")) #endif /* Various silicon revisions for omap2 */ diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c index c437a9941726..6d8bbf7d39d8 100644 --- a/arch/arm/mach-qcom/board.c +++ b/arch/arm/mach-qcom/board.c @@ -18,6 +18,8 @@ static const char * const qcom_dt_match[] __initconst = { "qcom,apq8064", "qcom,apq8074-dragonboard", "qcom,apq8084", + "qcom,ipq8062", + "qcom,ipq8064", "qcom,msm8660-surf", "qcom,msm8960-cdp", NULL diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index d1686696ca41..ac5803cac98d 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -4,6 +4,7 @@ config ARCH_ROCKCHIP select PINCTRL_ROCKCHIP select ARCH_HAS_RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA select ARM_GIC select CACHE_L2X0 select HAVE_ARM_ARCH_TIMER diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index e15dff790dbb..1e6c51c7c2d5 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -75,6 +75,7 @@ config ARCH_SH7372 select ARM_CPU_SUSPEND if PM || CPU_IDLE select CPU_V7 select SH_CLK_CPG + select SH_INTC select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU @@ -85,6 +86,7 @@ config ARCH_SH73A0 select CPU_V7 select I2C select SH_CLK_CPG + select SH_INTC select RENESAS_INTC_IRQPIN select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 17435c1aa2fe..126ddafad526 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -183,8 +183,8 @@ enum { static struct clk div4_clks[DIV4_NR] = { [DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT), - [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT), - [DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1de0, CLK_ENABLE_ON_INIT), + [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT), + [DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1df0, CLK_ENABLE_ON_INIT), }; /* DIV6 clocks */ diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c index 10e193d707f5..453b23129cfa 100644 --- a/arch/arm/mach-shmobile/clock-r8a7791.c +++ b/arch/arm/mach-shmobile/clock-r8a7791.c @@ -152,7 +152,7 @@ enum { static struct clk div4_clks[DIV4_NR] = { [DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT), - [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT), + [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT), }; /* DIV6 clocks */ diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index d8c4048b9e33..02a6f45a0b9e 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -644,7 +644,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */ - CLKDEV_DEV_ID("0xe6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */ + CLKDEV_DEV_ID("e6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]), /* SCIFA0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index 2c2754e79cb3..f61158c6ce71 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -426,9 +426,15 @@ static int ve_spc_populate_opps(uint32_t cluster) static int ve_init_opp_table(struct device *cpu_dev) { - int cluster = topology_physical_package_id(cpu_dev->id); - int idx, ret = 0, max_opp = info->num_opps[cluster]; - struct ve_spc_opp *opps = info->opps[cluster]; + int cluster; + int idx, ret = 0, max_opp; + struct ve_spc_opp *opps; + + cluster = topology_physical_package_id(cpu_dev->id); + cluster = cluster < 0 ? 0 : cluster; + + max_opp = info->num_opps[cluster]; + opps = info->opps[cluster]; for (idx = 0; idx < max_opp; idx++, opps++) { ret = dev_pm_opp_add(cpu_dev, opps->freq * 1000, opps->u_volt); @@ -537,6 +543,8 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev) spc->hw.init = &init; spc->cluster = topology_physical_package_id(cpu_dev->id); + spc->cluster = spc->cluster < 0 ? 0 : spc->cluster; + init.name = dev_name(cpu_dev); init.ops = &clk_spc_ops; init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE; diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index 3815a8262af0..8c48c5c22a33 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -17,12 +17,6 @@ */ .align 5 ENTRY(v6_early_abort) -#ifdef CONFIG_CPU_V6 - sub r1, sp, #4 @ Get unused stack location - strex r0, r1, [r1] @ Clear the exclusive monitor -#elif defined(CONFIG_CPU_32v6K) - clrex -#endif mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR /* diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S index 703375277ba6..4812ad054214 100644 --- a/arch/arm/mm/abort-ev7.S +++ b/arch/arm/mm/abort-ev7.S @@ -13,12 +13,6 @@ */ .align 5 ENTRY(v7_early_abort) - /* - * The effect of data aborts on on the exclusive access monitor are - * UNPREDICTABLE. Do a CLREX to clear the state - */ - clrex - mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR |
