diff options
Diffstat (limited to 'arch/arm')
198 files changed, 5178 insertions, 3330 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index caf00998cfa7..2c3bdce15134 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -49,6 +49,7 @@ config ARM select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_SYSCALL_TRACEPOINTS select HAVE_UID16 + select VIRT_TO_BUS select KTIME_SCALAR select PERF_USE_VMALLOC select RTC_LIB @@ -77,6 +78,27 @@ config ARM_DMA_USE_IOMMU select ARM_HAS_SG_CHAIN select NEED_SG_DMA_LENGTH +if ARM_DMA_USE_IOMMU + +config ARM_DMA_IOMMU_ALIGNMENT + int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers" + range 4 9 + default 8 + help + DMA mapping framework by default aligns all buffers to the smallest + PAGE_SIZE order which is greater than or equal to the requested buffer + size. This works well for buffers up to a few hundreds kilobytes, but + for larger buffers it just a waste of address space. Drivers which has + relatively small addressing window (like 64Mib) might run out of + virtual space with just a few allocations. + + With this parameter you can specify the maximum PAGE_SIZE order for + DMA IOMMU buffers. Larger buffers will be aligned only to this + specified order. The order is expressed as a power of two multiplied + by the PAGE_SIZE. + +endif + config HAVE_PWM bool @@ -534,7 +556,6 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" select ARCH_REQUIRE_GPIOLIB - select COMMON_CLK_DOVE select CPU_V7 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI @@ -1635,13 +1656,16 @@ config LOCAL_TIMERS accounting to be spread across the timer interval, preventing a "thundering herd" at every timer tick. +# The GPIO number here must be sorted by descending number. In case of +# a multiplatform kernel, we just want the highest value required by the +# selected platforms. config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA - default 355 if ARCH_U8500 - default 264 if MACH_H4700 default 512 if SOC_OMAP5 + default 355 if ARCH_U8500 default 288 if ARCH_VT8500 || ARCH_SUNXI + default 264 if MACH_H4700 default 0 help Maximum number of GPIOs in the system. @@ -1654,7 +1678,6 @@ config HZ int default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \ ARCH_S5PV210 || ARCH_EXYNOS4 - default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE default 100 diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index acddddac7ee4..ecfcdba2d17c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -492,7 +492,7 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX31_UART || \ DEBUG_IMX35_UART || \ DEBUG_IMX51_UART || \ - DEBUG_IMX50_IMX53_UART || \ + DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART default 1 help diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index abfce280f57b..84aa2caf07ed 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -68,8 +68,8 @@ else endif check_for_multiple_loadaddr = \ -if [ $(words $(UIMAGE_LOADADDR)) -gt 1 ]; then \ - echo 'multiple load addresses: $(UIMAGE_LOADADDR)'; \ +if [ $(words $(UIMAGE_LOADADDR)) -ne 1 ]; then \ + echo 'multiple (or no) load addresses: $(UIMAGE_LOADADDR)'; \ echo 'This is incompatible with uImages'; \ echo 'Specify LOADADDR on the commandline to build an uImage'; \ false; \ @@ -115,4 +115,4 @@ i: $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ $(obj)/Image System.map "$(INSTALL_PATH)" -subdir- := bootp compressed +subdir- := bootp compressed dts diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 5cad8a6dadb0..afed28e37ea5 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -120,7 +120,7 @@ ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif -ccflags-y := -fpic -fno-builtin -I$(obj) +ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj) asflags-y := -Wa,-march=all -DZIMAGE # Supply kernel BSS size to the decompressor via a linker symbol. diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 411ab1614a0e..9c6255884cbb 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-dockstar.dtb \ kirkwood-dreamplug.dtb \ kirkwood-goflexnet.dtb \ + kirkwood-guruplug-server-plus.dtb \ kirkwood-ib62x0.dtb \ kirkwood-iconnect.dtb \ kirkwood-iomega_ix2_200.dtb \ @@ -78,11 +79,21 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ + armada-370-rd.dtb \ armada-xp-db.dtb \ + armada-xp-gp.dtb \ armada-xp-openblocks-ax3-4.dtb -dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \ +dtb-$(CONFIG_ARCH_MXC) += \ + imx25-karo-tx25.dtb \ + imx25-pdk.dtb \ + imx27-apf27.dtb \ + imx27-pdk.dtb \ + imx31-bug.dtb \ + imx51-apf51.dtb \ + imx51-babbage.dtb \ imx53-ard.dtb \ imx53-evk.dtb \ + imx53-mba53.dtb \ imx53-qsb.dtb \ imx53-smd.dtb \ imx6q-arm2.dtb \ diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index c2f14e875eb6..0957645b73af 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -385,5 +385,19 @@ mac-address = [ 00 00 00 00 00 00 ]; }; }; + + ocmcram: ocmcram@40300000 { + compatible = "ti,am3352-ocmcram"; + reg = <0x40300000 0x10000>; + ti,hwmods = "ocmcram"; + ti,no_idle_on_suspend; + }; + + wkup_m3: wkup_m3@44d00000 { + compatible = "ti,am3353-wkup-m3"; + reg = <0x44d00000 0x4000 /* M3 UMEM */ + 0x44d80000 0x2000>; /* M3 DMEM */ + ti,hwmods = "wkup_m3"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 9b82facb2561..e34b280ce6ec 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -59,5 +59,40 @@ phy = <&phy1>; phy-mode = "rgmii-id"; }; + + mvsdio@d00d4000 { + pinctrl-0 = <&sdio_pins1>; + pinctrl-names = "default"; + /* + * This device is disabled by default, because + * using the SD card connector requires + * changing the default CON40 connector + * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a + * different connector + * "DB-88F6710_MPP_RGMII_SD_Jumper". + */ + status = "disabled"; + /* No CD or WP GPIOs */ + }; + + usb@d0050000 { + status = "okay"; + }; + + usb@d0051000 { + status = "okay"; + }; + + spi0: spi@d0010600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l25635e"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 3b4071336599..dd0c57dd9f30 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -52,5 +52,23 @@ phy = <&phy1>; phy-mode = "rgmii-id"; }; + + mvsdio@d00d4000 { + pinctrl-0 = <&sdio_pins2>; + pinctrl-names = "default"; + status = "okay"; + /* + * No CD or WP GPIOs: SDIO interface used for + * Wifi/Bluetooth chip + */ + }; + + usb@d0050000 { + status = "okay"; + }; + + usb@d0051000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts new file mode 100644 index 000000000000..070bba4f2585 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -0,0 +1,76 @@ +/* + * Device Tree file for Marvell Armada 370 Reference Design board + * (RD-88F6710-A1) + * + * Copied from arch/arm/boot/dts/armada-370-db.dts + * + * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "armada-370.dtsi" + +/ { + model = "Marvell Armada 370 Reference Design"; + compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + serial@d0012000 { + clock-frequency = <200000000>; + status = "okay"; + }; + sata@d00a0000 { + nr-ports = <2>; + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet@d0070000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "sgmii"; + }; + ethernet@d0074000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + mvsdio@d00d4000 { + pinctrl-0 = <&sdio_pins1>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + }; + + usb@d0050000 { + status = "okay"; + }; + + usb@d0051000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 5b2922599f0e..5b708208b607 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -31,7 +31,6 @@ mpic: interrupt-controller@d0020000 { compatible = "marvell,mpic"; #interrupt-cells = <1>; - #address-cells = <1>; #size-cells = <1>; interrupt-controller; }; @@ -54,7 +53,7 @@ reg = <0xd0012000 0x100>; reg-shift = <2>; interrupts = <41>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; serial@d0012100 { @@ -62,14 +61,15 @@ reg = <0xd0012100 0x100>; reg-shift = <2>; interrupts = <42>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; timer@d0020300 { compatible = "marvell,armada-370-xp-timer"; - reg = <0xd0020300 0x30>; - interrupts = <37>, <38>, <39>, <40>; + reg = <0xd0020300 0x30>, + <0xd0021040 0x30>; + interrupts = <37>, <38>, <39>, <40>, <5>, <6>; clocks = <&coreclk 2>; }; @@ -137,6 +137,50 @@ reg = <0xd0010300 0x20>; interrupts = <50>; }; + + mvsdio@d00d4000 { + compatible = "marvell,orion-sdio"; + reg = <0xd00d4000 0x200>; + interrupts = <54>; + clocks = <&gateclk 17>; + status = "disabled"; + }; + + usb@d0050000 { + compatible = "marvell,orion-ehci"; + reg = <0xd0050000 0x500>; + interrupts = <45>; + status = "disabled"; + }; + + usb@d0051000 { + compatible = "marvell,orion-ehci"; + reg = <0xd0051000 0x500>; + interrupts = <46>; + status = "disabled"; + }; + + spi0: spi@d0010600 { + compatible = "marvell,orion-spi"; + reg = <0xd0010600 0x28>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <30>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + spi1: spi@d0010680 { + compatible = "marvell,orion-spi"; + reg = <0xd0010680 0x28>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <92>; + clocks = <&coreclk 0>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 636cf7d4009e..8188d138020e 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -47,6 +47,18 @@ pinctrl { compatible = "marvell,mv88f6710-pinctrl"; reg = <0xd0018000 0x38>; + + sdio_pins1: sdio-pins1 { + marvell,pins = "mpp9", "mpp11", "mpp12", + "mpp13", "mpp14", "mpp15"; + marvell,function = "sd0"; + }; + + sdio_pins2: sdio-pins2 { + marvell,pins = "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52"; + marvell,function = "sd0"; + }; }; gpio0: gpio@d0018100 { @@ -132,5 +144,14 @@ dmacap,memset; }; }; + + usb@d0050000 { + clocks = <&coreclk 0>; + }; + + usb@d0051000 { + clocks = <&coreclk 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 8e53b25b5508..e83505e4c236 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -90,5 +90,36 @@ phy = <&phy3>; phy-mode = "sgmii"; }; + + mvsdio@d00d4000 { + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + }; + + usb@d0050000 { + status = "okay"; + }; + + usb@d0051000 { + status = "okay"; + }; + + usb@d0052000 { + status = "okay"; + }; + + spi0: spi@d0010600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts new file mode 100644 index 000000000000..1c8afe2ffebc --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -0,0 +1,113 @@ +/* + * Device Tree file for Marvell Armada XP development board + * (DB-MV784MP-GP) + * + * Copyright (C) 2013 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "armada-xp-mv78460.dtsi" + +/ { + model = "Marvell Armada XP Development Board DB-MV784MP-GP"; + compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + + /* + * 4 GB of plug-in RAM modules by default but only 3GB + * are visible, the amount of memory available can be + * changed by the bootloader according the size of the + * module actually plugged + */ + reg = <0x00000000 0xC0000000>; + }; + + soc { + serial@d0012000 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012100 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012200 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012300 { + clock-frequency = <250000000>; + status = "okay"; + }; + + sata@d00a0000 { + nr-ports = <2>; + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <16>; + }; + + phy1: ethernet-phy@1 { + reg = <17>; + }; + + phy2: ethernet-phy@2 { + reg = <18>; + }; + + phy3: ethernet-phy@3 { + reg = <19>; + }; + }; + + ethernet@d0070000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@d0074000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + ethernet@d0030000 { + status = "okay"; + phy = <&phy2>; + phy-mode = "rgmii-id"; + }; + ethernet@d0034000 { + status = "okay"; + phy = <&phy3>; + phy-mode = "rgmii-id"; + }; + + spi0: spi@d0010600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index e041f42ed711..f56c40599f5b 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -47,6 +47,12 @@ pinctrl { compatible = "marvell,mv78230-pinctrl"; reg = <0xd0018000 0x38>; + + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; }; gpio0: gpio@d0018100 { diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 9e23bd8c9536..f8f2b787d2b0 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -48,6 +48,12 @@ pinctrl { compatible = "marvell,mv78260-pinctrl"; reg = <0xd0018000 0x38>; + + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; }; gpio0: gpio@d0018100 { diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 965966110e38..936c25dc32b0 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -63,6 +63,12 @@ pinctrl { compatible = "marvell,mv78460-pinctrl"; reg = <0xd0018000 0x38>; + + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; }; gpio0: gpio@d0018100 { diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index b42652fd3d8c..3818a82176a2 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -66,6 +66,18 @@ }; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Init Button"; + linux,code = <116>; + gpios = <&gpio1 28 0>; + }; + }; + mdio { phy0: ethernet-phy@0 { reg = <0>; @@ -121,5 +133,11 @@ nr-ports = <2>; status = "okay"; }; + usb@d0050000 { + status = "okay"; + }; + usb@d0051000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 2e37ef101c90..ca00d8326c87 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -30,7 +30,7 @@ }; mpic: interrupt-controller@d0020000 { - reg = <0xd0020a00 0x1d0>, + reg = <0xd0020a00 0x2d0>, <0xd0021070 0x58>; }; @@ -46,7 +46,7 @@ reg = <0xd0012200 0x100>; reg-shift = <2>; interrupts = <43>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; serial@d0012300 { @@ -54,7 +54,7 @@ reg = <0xd0012300 0x100>; reg-shift = <2>; interrupts = <44>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; @@ -134,5 +134,22 @@ dmacap,memset; }; }; + + usb@d0050000 { + clocks = <&gateclk 18>; + }; + + usb@d0051000 { + clocks = <&gateclk 19>; + }; + + usb@d0052000 { + compatible = "marvell,orion-ehci"; + reg = <0xd0052000 0x500>; + interrupts = <47>; + clocks = <&gateclk 20>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 4bf2a8774aa7..7e0481e2441a 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -105,7 +105,7 @@ compatible = "fixed-clock"; reg = <1>; #clock-cells = <0>; - clock-frequency = <150000000>; + clock-frequency = <250000000>; }; }; }; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index cdee96fca6e2..7e3065abd751 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -17,12 +17,33 @@ leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_gpio_18>; + pinctrl-names = "default"; + power { label = "Power"; gpios = <&gpio0 18 1>; linux,default-trigger = "default-on"; }; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 1 0>; + }; + }; }; &uart0 { status = "okay"; }; @@ -47,9 +68,14 @@ }; &pinctrl { - pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>; + pinctrl-0 = <&pmx_gpio_1 &pmx_gpio_12>; pinctrl-names = "default"; + pmx_gpio_1: pmx-gpio-1 { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + pmx_gpio_12: pmx-gpio-12 { marvell,pins = "mpp12"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 740630f9cd65..f7509cafc377 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -55,7 +55,7 @@ reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <7>; - clock-frequency = <166666667>; + clocks = <&core_clk 0>; status = "disabled"; }; @@ -64,7 +64,7 @@ reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <8>; - clock-frequency = <166666667>; + clocks = <&core_clk 0>; status = "disabled"; }; @@ -73,7 +73,7 @@ reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <9>; - clock-frequency = <166666667>; + clocks = <&core_clk 0>; status = "disabled"; }; @@ -82,7 +82,7 @@ reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <10>; - clock-frequency = <166666667>; + clocks = <&core_clk 0>; status = "disabled"; }; @@ -156,6 +156,22 @@ status = "disabled"; }; + ehci0: usb-host@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <24>; + clocks = <&gate_clk 0>; + status = "okay"; + }; + + ehci1: usb-host@51000 { + compatible = "marvell,orion-ehci"; + reg = <0x51000 0x1000>; + interrupts = <25>; + clocks = <&gate_clk 1>; + status = "okay"; + }; + sdio0: sdio@92000 { compatible = "marvell,dove-sdhci"; reg = <0x92000 0x100>; @@ -181,6 +197,11 @@ status = "disabled"; }; + rtc@d8500 { + compatible = "marvell,orion-rtc"; + reg = <0xd8500 0x20>; + }; + crypto: crypto@30000 { compatible = "marvell,orion-crypto"; reg = <0x30000 0x10000>, diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 4db9db0a8443..1b8d4106d338 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -151,6 +151,7 @@ reg = <0>; bus-width = <4>; samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>; + disable-wp; gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>, <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>, <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>, diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index f50b4e854355..b1ac73e21c80 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -312,24 +312,36 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x121A0000 0x1000>; interrupts = <0 34 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; pdma1: pdma@121B0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121B0000 0x1000>; interrupts = <0 35 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; mdma0: mdma@10800000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10800000 0x1000>; interrupts = <0 33 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; }; mdma1: mdma@11C10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x11C10000 0x1000>; interrupts = <0 124 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; }; }; diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts index d81f8a0b9794..1a9d0491cdce 100644 --- a/arch/arm/boot/dts/imx25-karo-tx25.dts +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -19,26 +19,18 @@ memory { reg = <0x80000000 0x02000000 0x90000000 0x02000000>; }; +}; - soc { - aips@43f00000 { - uart1: serial@43f90000 { - status = "okay"; - }; - }; +&uart1 { + status = "okay"; +}; - spba@50000000 { - fec: ethernet@50038000 { - status = "okay"; - phy-mode = "rmii"; - }; - }; +&fec { + phy-mode = "rmii"; + status = "okay"; +}; - emi@80000000 { - nand@bb000000 { - nand-on-flash-bbt; - status = "okay"; - }; - }; - }; +&nfc { + nand-on-flash-bbt; + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts new file mode 100644 index 000000000000..a02a860afd18 --- /dev/null +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -0,0 +1,36 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx25.dtsi" + +/ { + model = "Freescale i.MX25 Product Development Kit"; + compatible = "fsl,imx25-pdk", "fsl,imx25"; + + memory { + reg = <0x80000000 0x4000000>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&fec { + phy-mode = "rmii"; + status = "okay"; +}; + +&nfc { + nand-on-flash-bbt; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index e1b13ebc96d6..94f33059158a 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -499,7 +499,7 @@ reg = <0x80000000 0x3b002000>; ranges; - nand@bb000000 { + nfc: nand@bb000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts index c0327c054de2..b464c807d8d9 100644 --- a/arch/arm/boot/dts/imx27-apf27.dts +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -32,58 +32,54 @@ clock-frequency = <0>; }; }; +}; - soc { - aipi@10000000 { - serial@1000a000 { - status = "okay"; - }; +&uart1 { + status = "okay"; +}; - ethernet@1002b000 { - status = "okay"; - }; - }; +&fec { + status = "okay"; +}; - nand@d8000000 { - status = "okay"; - nand-bus-width = <16>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; +&nfc { + status = "okay"; + nand-bus-width = <16>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; - partition@0 { - label = "u-boot"; - reg = <0x0 0x100000>; - }; + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + }; - partition@100000 { - label = "env"; - reg = <0x100000 0x80000>; - }; + partition@100000 { + label = "env"; + reg = <0x100000 0x80000>; + }; - partition@180000 { - label = "env2"; - reg = <0x180000 0x80000>; - }; + partition@180000 { + label = "env2"; + reg = <0x180000 0x80000>; + }; - partition@200000 { - label = "firmware"; - reg = <0x200000 0x80000>; - }; + partition@200000 { + label = "firmware"; + reg = <0x200000 0x80000>; + }; - partition@280000 { - label = "dtb"; - reg = <0x280000 0x80000>; - }; + partition@280000 { + label = "dtb"; + reg = <0x280000 0x80000>; + }; - partition@300000 { - label = "kernel"; - reg = <0x300000 0x500000>; - }; + partition@300000 { + label = "kernel"; + reg = <0x300000 0x500000>; + }; - partition@800000 { - label = "rootfs"; - reg = <0x800000 0xf800000>; - }; - }; + partition@800000 { + label = "rootfs"; + reg = <0x800000 0xf800000>; }; }; diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-pdk.dts index fa04c7b18bcb..41cd1105608e 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -13,25 +13,19 @@ /include/ "imx27.dtsi" / { - model = "mx27_3ds"; - compatible = "freescale,imx27-3ds", "fsl,imx27"; + model = "Freescale i.MX27 Product Development Kit"; + compatible = "fsl,imx27-pdk", "fsl,imx27"; memory { reg = <0x0 0x0>; }; +}; - soc { - aipi@10000000 { /* aipi1 */ - uart1: serial@1000a000 { - fsl,uart-has-rtscts; - status = "okay"; - }; - }; +&uart1 { + fsl,uart-has-rtscts; + status = "okay"; +}; - aipi@10020000 { /* aipi2 */ - ethernet@1002b000 { - status = "okay"; - }; - }; - }; +&fec { + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts index 7f67402328d3..9ac6f6ba1d64 100644 --- a/arch/arm/boot/dts/imx31-bug.dts +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -19,13 +19,9 @@ memory { reg = <0x80000000 0x8000000>; /* 128M */ }; +}; - soc { - aips@43f00000 { /* AIPS1 */ - uart5: serial@43fb4000 { - fsl,uart-has-rtscts; - status = "okay"; - }; - }; - }; +&uart5 { + fsl,uart-has-rtscts; + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts new file mode 100644 index 000000000000..92d3a66a69e2 --- /dev/null +++ b/arch/arm/boot/dts/imx51-apf51.dts @@ -0,0 +1,52 @@ +/* + * Copyright 2012 Armadeus Systems - <support@armadeus.com> + * Copyright 2012 Laurent Cans <laurent.cans@gmail.com> + * + * Based on mx51-babbage.dts + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx51.dtsi" + +/ { + model = "Armadeus Systems APF51 module"; + compatible = "armadeus,imx51-apf51", "fsl,imx51"; + + memory { + reg = <0x90000000 0x20000000>; + }; + + clocks { + ckih1 { + clock-frequency = <0>; + }; + + osc { + clock-frequency = <33554432>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_2>; + phy-mode = "mii"; + phy-reset-gpios = <&gpio3 0 0>; + phy-reset-duration = <1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_2>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 567e7ee72f91..aab6e43219af 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -21,239 +21,20 @@ reg = <0x90000000 0x20000000>; }; - soc { - display@di0 { - compatible = "fsl,imx-parallel-display"; - crtcs = <&ipu 0>; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp1_1>; - }; - - display@di1 { - compatible = "fsl,imx-parallel-display"; - crtcs = <&ipu 1>; - interface-pix-fmt = "rgb565"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp2_1>; - }; - - aips@70000000 { /* aips-1 */ - spba@70000000 { - esdhc@70004000 { /* ESDHC1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1_1>; - fsl,cd-controller; - fsl,wp-controller; - status = "okay"; - }; - - esdhc@70008000 { /* ESDHC2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc2_1>; - cd-gpios = <&gpio1 6 0>; - wp-gpios = <&gpio1 5 0>; - status = "okay"; - }; - - uart3: serial@7000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3_1>; - fsl,uart-has-rtscts; - status = "okay"; - }; - - ecspi@70010000 { /* ECSPI1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1_1>; - fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; - status = "okay"; - - pmic: mc13892@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mc13892"; - spi-max-frequency = <6000000>; - reg = <0>; - interrupt-parent = <&gpio1>; - interrupts = <8 0x4>; - - regulators { - sw1_reg: sw1 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1375000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: sw3 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: sw4 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - vpll_reg: vpll { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - vdig_reg: vdig { - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <1650000>; - regulator-boot-on; - }; - - vsd_reg: vsd { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3150000>; - }; - - vusb2_reg: vusb2 { - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <2775000>; - regulator-boot-on; - regulator-always-on; - }; - - vvideo_reg: vvideo { - regulator-min-microvolt = <2775000>; - regulator-max-microvolt = <2775000>; - }; - - vaudio_reg: vaudio { - regulator-min-microvolt = <2300000>; - regulator-max-microvolt = <3000000>; - }; - - vcam_reg: vcam { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3000000>; - }; - - vgen1_reg: vgen1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3150000>; - regulator-always-on; - }; - - vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - }; - }; - }; - - flash: at45db321d@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; - spi-max-frequency = <25000000>; - reg = <1>; - - partition@0 { - label = "U-Boot"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "Kernel"; - reg = <0x40000 0x3c0000>; - }; - }; - }; - - ssi2: ssi@70014000 { - fsl,mode = "i2s-slave"; - status = "okay"; - }; - }; - - iomuxc@73fa8000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */ - 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */ - 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */ - 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */ - 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */ - 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */ - 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */ - >; - }; - }; - }; - - uart1: serial@73fbc000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; - fsl,uart-has-rtscts; - status = "okay"; - }; - - uart2: serial@73fc0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_1>; - status = "okay"; - }; - }; - - aips@80000000 { /* aips-2 */ - i2c@83fc4000 { /* I2C2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_1>; - status = "okay"; - - sgtl5000: codec@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clock-frequency = <26000000>; - VDDA-supply = <&vdig_reg>; - VDDIO-supply = <&vvideo_reg>; - }; - }; - - audmux@83fd0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; - status = "okay"; - }; + display@di0 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1_1>; + }; - ethernet@83fec000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec_1>; - phy-mode = "mii"; - status = "okay"; - }; - }; + display@di1 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 1>; + interface-pix-fmt = "rgb565"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp2_1>; }; gpio-keys { @@ -281,3 +62,236 @@ mux-ext-port = <3>; }; }; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; + fsl,cd-controller; + fsl,wp-controller; + status = "okay"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; + cd-gpios = <&gpio1 6 0>; + wp-gpios = <&gpio1 5 0>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; + status = "okay"; + + pmic: mc13892@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mc13892"; + spi-max-frequency = <6000000>; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <8 0x4>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; + }; + + flash: at45db321d@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <25000000>; + reg = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0x3c0000>; + }; + }; +}; + +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */ + 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */ + 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */ + 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */ + 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */ + 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */ + 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */ + >; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clock-frequency = <26000000>; + VDDA-supply = <&vdig_reg>; + VDDIO-supply = <&vvideo_reg>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "mii"; + status = "okay"; +}; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp_1>; + linux,keymap = <0x00000067 /* KEY_UP */ + 0x0001006c /* KEY_DOWN */ + 0x00020072 /* KEY_VOLUMEDOWN */ + 0x00030066 /* KEY_HOME */ + 0x0100006a /* KEY_RIGHT */ + 0x01010069 /* KEY_LEFT */ + 0x0102001c /* KEY_ENTER */ + 0x01030073 /* KEY_VOLUMEUP */ + 0x02000040 /* KEY_F6 */ + 0x02010042 /* KEY_F8 */ + 0x02020043 /* KEY_F9 */ + 0x02030044 /* KEY_F10 */ + 0x0300003b /* KEY_F1 */ + 0x0301003c /* KEY_F2 */ + 0x0302003d /* KEY_F3 */ + 0x03030074>; /* KEY_POWER */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 1f5d45eff45e..fcf035bf7c5a 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -221,6 +221,14 @@ #interrupt-cells = <2>; }; + kpp: kpp@73f94000 { + compatible = "fsl,imx51-kpp", "fsl,imx21-kpp"; + reg = <0x73f94000 0x4000>; + interrupts = <60>; + clocks = <&clks 0>; + status = "disabled"; + }; + wdog1: wdog@73f98000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f98000 0x4000>; @@ -273,6 +281,29 @@ 260 0x80000000 /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */ >; }; + + pinctrl_fec_2: fecgrp-2 { + fsl,pins = < + 589 0x80000000 /* MX51_PAD_DI_GP3__FEC_TX_ER */ + 592 0x80000000 /* MX51_PAD_DI2_PIN4__FEC_CRS */ + 594 0x80000000 /* MX51_PAD_DI2_PIN2__FEC_MDC */ + 596 0x80000000 /* MX51_PAD_DI2_PIN3__FEC_MDIO */ + 598 0x80000000 /* MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 */ + 602 0x80000000 /* MX51_PAD_DI_GP4__FEC_RDATA2 */ + 604 0x80000000 /* MX51_PAD_DISP2_DAT0__FEC_RDATA3 */ + 609 0x80000000 /* MX51_PAD_DISP2_DAT1__FEC_RX_ER */ + 618 0x80000000 /* MX51_PAD_DISP2_DAT6__FEC_TDATA1 */ + 623 0x80000000 /* MX51_PAD_DISP2_DAT7__FEC_TDATA2 */ + 628 0x80000000 /* MX51_PAD_DISP2_DAT8__FEC_TDATA3 */ + 634 0x80000000 /* MX51_PAD_DISP2_DAT9__FEC_TX_EN */ + 639 0x80000000 /* MX51_PAD_DISP2_DAT10__FEC_COL */ + 644 0x80000000 /* MX51_PAD_DISP2_DAT11__FEC_RX_CLK */ + 649 0x80000000 /* MX51_PAD_DISP2_DAT12__FEC_RX_DV */ + 653 0x80000000 /* MX51_PAD_DISP2_DAT13__FEC_TX_CLK */ + 657 0x80000000 /* MX51_PAD_DISP2_DAT14__FEC_RDATA0 */ + 662 0x80000000 /* MX51_PAD_DISP2_DAT15__FEC_TDATA0 */ + >; + }; }; ecspi1 { @@ -409,6 +440,28 @@ 49 0x1c5 /* MX51_PAD_EIM_D24__UART3_CTS */ >; }; + + pinctrl_uart3_2: uart3grp-2 { + fsl,pins = < + 434 0x1c5 /* MX51_PAD_UART3_RXD__UART3_RXD */ + 430 0x1c5 /* MX51_PAD_UART3_TXD__UART3_TXD */ + >; + }; + }; + + kpp { + pinctrl_kpp_1: kppgrp-1 { + fsl,pins = < + 438 0xe0 /* MX51_PAD_KEY_ROW0__KEY_ROW0 */ + 439 0xe0 /* MX51_PAD_KEY_ROW1__KEY_ROW1 */ + 440 0xe0 /* MX51_PAD_KEY_ROW2__KEY_ROW2 */ + 441 0xe0 /* MX51_PAD_KEY_ROW3__KEY_ROW3 */ + 442 0xe8 /* MX51_PAD_KEY_COL0__KEY_COL0 */ + 444 0xe8 /* MX51_PAD_KEY_COL1__KEY_COL1 */ + 446 0xe8 /* MX51_PAD_KEY_COL2__KEY_COL2 */ + 448 0xe8 /* MX51_PAD_KEY_COL3__KEY_COL3 */ + >; + }; }; }; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 4be76f223526..e049fd0319e8 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -21,72 +21,6 @@ reg = <0x70000000 0x40000000>; }; - soc { - aips@50000000 { /* AIPS1 */ - spba@50000000 { - esdhc@50004000 { /* ESDHC1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1_2>; - cd-gpios = <&gpio1 1 0>; - wp-gpios = <&gpio1 9 0>; - status = "okay"; - }; - }; - - iomuxc@53fa8000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */ - 1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */ - 486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */ - 739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */ - 218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */ - 226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */ - 233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */ - 241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */ - 429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */ - 435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */ - 441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */ - 448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */ - 456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */ - 464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */ - 471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */ - 477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */ - 492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */ - 500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */ - 508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */ - 516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */ - 524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */ - 532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */ - 540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */ - 548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */ - 637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */ - 642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */ - 647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */ - 652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */ - 657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */ - 662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */ - 667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */ - 611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */ - 616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */ - 607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */ - >; - }; - }; - }; - - uart1: serial@53fbc000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_2>; - status = "okay"; - }; - }; - }; - eim-cs1@f4000000 { #address-cells = <1>; #size-cells = <1>; @@ -162,3 +96,63 @@ }; }; }; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_2>; + cd-gpios = <&gpio1 1 0>; + wp-gpios = <&gpio1 9 0>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */ + 1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */ + 486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */ + 739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */ + 218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */ + 226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */ + 233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */ + 241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */ + 429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */ + 435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */ + 441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */ + 448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */ + 456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */ + 464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */ + 471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */ + 477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */ + 492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */ + 500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */ + 508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */ + 516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */ + 524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */ + 532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */ + 540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */ + 548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */ + 637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */ + 642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */ + 647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */ + 652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */ + 657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */ + 662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */ + 667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */ + 611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */ + 616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */ + 607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */ + >; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts index a124d1e25258..85a89b52f9b8 100644 --- a/arch/arm/boot/dts/imx53-evk.dts +++ b/arch/arm/boot/dts/imx53-evk.dts @@ -21,107 +21,6 @@ reg = <0x70000000 0x80000000>; }; - soc { - aips@50000000 { /* AIPS1 */ - spba@50000000 { - esdhc@50004000 { /* ESDHC1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1_1>; - cd-gpios = <&gpio3 13 0>; - wp-gpios = <&gpio3 14 0>; - status = "okay"; - }; - - ecspi@50010000 { /* ECSPI1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1_1>; - fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; - status = "okay"; - - flash: at45db321d@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; - spi-max-frequency = <25000000>; - reg = <1>; - - partition@0 { - label = "U-Boot"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "Kernel"; - reg = <0x40000 0x3c0000>; - }; - }; - }; - - esdhc@50020000 { /* ESDHC3 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc3_1>; - cd-gpios = <&gpio3 11 0>; - wp-gpios = <&gpio3 12 0>; - status = "okay"; - }; - }; - - iomuxc@53fa8000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ - 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ - 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ - 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ - 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ - 705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */ - 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ - 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ - >; - }; - }; - }; - - uart1: serial@53fbc000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; - status = "okay"; - }; - }; - - aips@60000000 { /* AIPS2 */ - i2c@63fc4000 { /* I2C2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_1>; - status = "okay"; - - pmic: mc13892@08 { - compatible = "fsl,mc13892", "fsl,mc13xxx"; - reg = <0x08>; - }; - - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - }; - }; - - ethernet@63fec000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec_1>; - phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 0>; - status = "okay"; - }; - }; - }; - leds { compatible = "gpio-leds"; @@ -132,3 +31,96 @@ }; }; }; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; + cd-gpios = <&gpio3 13 0>; + wp-gpios = <&gpio3 14 0>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; + status = "okay"; + + flash: at45db321d@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <25000000>; + reg = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0x3c0000>; + }; + }; +}; + +&esdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; + cd-gpios = <&gpio3 11 0>; + wp-gpios = <&gpio3 12 0>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ + 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ + 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ + 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ + 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ + 705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */ + 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ + >; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; + status = "okay"; + + pmic: mc13892@08 { + compatible = "fsl,mc13892", "fsl,mc13xxx"; + reg = <0x08>; + }; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio7 6 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts new file mode 100644 index 000000000000..468c0a1d48d9 --- /dev/null +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -0,0 +1,129 @@ +/* + * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx53-tqma53.dtsi" + +/ { + model = "TQ MBa53 starter kit"; + compatible = "tq,mba53", "tq,tqma53", "fsl,imx53"; +}; + +&iomuxc { + lvds1 { + pinctrl_lvds1_1: lvds1-grp1 { + fsl,pins = <730 0x10000 /* LVDS0_TX3 */ + 732 0x10000 /* LVDS0_CLK */ + 734 0x10000 /* LVDS0_TX2 */ + 736 0x10000 /* LVDS0_TX1 */ + 738 0x10000>; /* LVDS0_TX0 */ + }; + + pinctrl_lvds1_2: lvds1-grp2 { + fsl,pins = <720 0x10000 /* LVDS1_TX3 */ + 722 0x10000 /* LVDS1_TX2 */ + 724 0x10000 /* LVDS1_CLK */ + 726 0x10000 /* LVDS1_TX1 */ + 728 0x10000>; /* LVDS1_TX0 */ + }; + }; + + disp1 { + pinctrl_disp1_1: disp1-grp1 { + fsl,pins = <689 0x10000 /* DISP1_DRDY */ + 482 0x10000 /* DISP1_HSYNC */ + 489 0x10000 /* DISP1_VSYNC */ + 515 0x10000 /* DISP1_DAT_22 */ + 523 0x10000 /* DISP1_DAT_23 */ + 545 0x10000 /* DISP1_DAT_21 */ + 553 0x10000 /* DISP1_DAT_20 */ + 558 0x10000 /* DISP1_DAT_19 */ + 564 0x10000 /* DISP1_DAT_18 */ + 570 0x10000 /* DISP1_DAT_17 */ + 575 0x10000 /* DISP1_DAT_16 */ + 580 0x10000 /* DISP1_DAT_15 */ + 585 0x10000 /* DISP1_DAT_14 */ + 590 0x10000 /* DISP1_DAT_13 */ + 595 0x10000 /* DISP1_DAT_12 */ + 628 0x10000 /* DISP1_DAT_11 */ + 634 0x10000 /* DISP1_DAT_10 */ + 639 0x10000 /* DISP1_DAT_9 */ + 644 0x10000 /* DISP1_DAT_8 */ + 649 0x10000 /* DISP1_DAT_7 */ + 654 0x10000 /* DISP1_DAT_6 */ + 659 0x10000 /* DISP1_DAT_5 */ + 664 0x10000 /* DISP1_DAT_4 */ + 669 0x10000 /* DISP1_DAT_3 */ + 674 0x10000 /* DISP1_DAT_2 */ + 679 0x10000 /* DISP1_DAT_1 */ + 684 0x10000>; /* DISP1_DAT_0 */ + }; + }; +}; + +&cspi { + status = "okay"; +}; + +&i2c2 { + codec: sgtl5000@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + }; + + expander: pca9554@20 { + compatible = "pca9554"; + reg = <0x20>; + interrupts = <109>; + }; + + sensor2: lm75@49 { + compatible = "lm75"; + reg = <0x49>; + }; +}; + +&fec { + status = "okay"; +}; + +&esdhc2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&ecspi1 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index b0075537195b..05cc5620436b 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -21,200 +21,6 @@ reg = <0x70000000 0x40000000>; }; - soc { - aips@50000000 { /* AIPS1 */ - spba@50000000 { - esdhc@50004000 { /* ESDHC1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1_1>; - cd-gpios = <&gpio3 13 0>; - status = "okay"; - }; - - ssi2: ssi@50014000 { - fsl,mode = "i2s-slave"; - status = "okay"; - }; - - esdhc@50020000 { /* ESDHC3 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc3_1>; - cd-gpios = <&gpio3 11 0>; - wp-gpios = <&gpio3 12 0>; - status = "okay"; - }; - }; - - iomuxc@53fa8000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */ - 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */ - 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ - 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ - 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ - 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ - 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ - 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ - 1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */ - >; - }; - - led_pin_gpio7_7: led_gpio7_7@0 { - fsl,pins = < - 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ - >; - }; - }; - - }; - - uart1: serial@53fbc000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; - status = "okay"; - }; - }; - - aips@60000000 { /* AIPS2 */ - i2c@63fc4000 { /* I2C2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_1>; - status = "okay"; - - sgtl5000: codec@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - VDDA-supply = <®_3p2v>; - VDDIO-supply = <®_3p2v>; - }; - }; - - i2c@63fc8000 { /* I2C1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - status = "okay"; - - accelerometer: mma8450@1c { - compatible = "fsl,mma8450"; - reg = <0x1c>; - }; - - pmic: dialog@48 { - compatible = "dlg,da9053-aa", "dlg,da9052"; - reg = <0x48>; - interrupt-parent = <&gpio7>; - interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */ - - regulators { - buck1_reg: buck1 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <2075000>; - regulator-always-on; - }; - - buck2_reg: buck2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <2075000>; - regulator-always-on; - }; - - buck3_reg: buck3 { - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - buck4_reg: buck4 { - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - ldo1_reg: ldo1 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ldo2 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo3_reg: ldo3 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: ldo4 { - regulator-min-microvolt = <1725000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo5_reg: ldo5 { - regulator-min-microvolt = <1725000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo6_reg: ldo6 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3600000>; - regulator-always-on; - }; - - ldo7_reg: ldo7 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3600000>; - regulator-always-on; - }; - - ldo8_reg: ldo8 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3600000>; - regulator-always-on; - }; - - ldo9_reg: ldo9 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3600000>; - regulator-always-on; - }; - - ldo10_reg: ldo10 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <3650000>; - regulator-always-on; - }; - }; - }; - }; - - audmux@63fd0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; - status = "okay"; - }; - - ethernet@63fec000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec_1>; - phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 0>; - status = "okay"; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -276,3 +82,189 @@ mux-ext-port = <5>; }; }; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; + cd-gpios = <&gpio3 13 0>; + status = "okay"; +}; + +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&esdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; + cd-gpios = <&gpio3 11 0>; + wp-gpios = <&gpio3 12 0>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */ + 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */ + 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ + 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ + 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ + 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ + 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ + 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + 1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */ + >; + }; + + led_pin_gpio7_7: led_gpio7_7@0 { + fsl,pins = < + 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ + >; + }; + }; + +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p2v>; + VDDIO-supply = <®_3p2v>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + status = "okay"; + + accelerometer: mma8450@1c { + compatible = "fsl,mma8450"; + reg = <0x1c>; + }; + + pmic: dialog@48 { + compatible = "dlg,da9053-aa", "dlg,da9052"; + reg = <0x48>; + interrupt-parent = <&gpio7>; + interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */ + + regulators { + buck1_reg: buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + buck4_reg: buck4 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo7_reg: ldo7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo9_reg: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo10_reg: ldo10 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3650000>; + regulator-always-on; + }; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio7 6 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 06c68580c842..995554c324b8 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -21,157 +21,6 @@ reg = <0x70000000 0x40000000>; }; - soc { - aips@50000000 { /* AIPS1 */ - spba@50000000 { - esdhc@50004000 { /* ESDHC1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1_1>; - cd-gpios = <&gpio3 13 0>; - wp-gpios = <&gpio4 11 0>; - status = "okay"; - }; - - esdhc@50008000 { /* ESDHC2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc2_1>; - non-removable; - status = "okay"; - }; - - uart3: serial@5000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3_1>; - fsl,uart-has-rtscts; - status = "okay"; - }; - - ecspi@50010000 { /* ECSPI1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1_1>; - fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; - status = "okay"; - - zigbee: mc1323@0 { - compatible = "fsl,mc1323"; - spi-max-frequency = <8000000>; - reg = <0>; - }; - - flash: m25p32@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p32", "st,m25p"; - spi-max-frequency = <20000000>; - reg = <1>; - - partition@0 { - label = "U-Boot"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "Kernel"; - reg = <0x40000 0x3c0000>; - }; - }; - }; - - esdhc@50020000 { /* ESDHC3 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc3_1>; - non-removable; - status = "okay"; - }; - }; - - iomuxc@53fa8000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ - 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ - 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ - 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ - 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ - 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */ - 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ - >; - }; - }; - }; - - uart1: serial@53fbc000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; - status = "okay"; - }; - - uart2: serial@53fc0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_1>; - status = "okay"; - }; - }; - - aips@60000000 { /* AIPS2 */ - i2c@63fc4000 { /* I2C2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_1>; - status = "okay"; - - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - }; - - magnetometer: mag3110@0e { - compatible = "fsl,mag3110"; - reg = <0x0e>; - }; - - touchkey: mpr121@5a { - compatible = "fsl,mpr121"; - reg = <0x5a>; - }; - }; - - i2c@63fc8000 { /* I2C1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - status = "okay"; - - accelerometer: mma8450@1c { - compatible = "fsl,mma8450"; - reg = <0x1c>; - }; - - camera: ov5642@3c { - compatible = "ovti,ov5642"; - reg = <0x3c>; - }; - - pmic: dialog@48 { - compatible = "dialog,da9053", "dialog,da9052"; - reg = <0x48>; - }; - }; - - ethernet@63fec000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec_1>; - phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 0>; - status = "okay"; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -188,3 +37,146 @@ }; }; }; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; + cd-gpios = <&gpio3 13 0>; + wp-gpios = <&gpio4 11 0>; + status = "okay"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; + non-removable; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; + status = "okay"; + + zigbee: mc1323@0 { + compatible = "fsl,mc1323"; + spi-max-frequency = <8000000>; + reg = <0>; + }; + + flash: m25p32@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32", "st,m25p"; + spi-max-frequency = <20000000>; + reg = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0x3c0000>; + }; + }; +}; + +&esdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ + 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ + 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ + 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ + 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ + 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */ + 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + >; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + }; + + magnetometer: mag3110@0e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + }; + + touchkey: mpr121@5a { + compatible = "fsl,mpr121"; + reg = <0x5a>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + status = "okay"; + + accelerometer: mma8450@1c { + compatible = "fsl,mma8450"; + reg = <0x1c>; + }; + + camera: ov5642@3c { + compatible = "ovti,ov5642"; + reg = <0x3c>; + }; + + pmic: dialog@48 { + compatible = "dialog,da9053", "dialog,da9052"; + reg = <0x48>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio7 6 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi new file mode 100644 index 000000000000..8278ec5ec222 --- /dev/null +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -0,0 +1,172 @@ +/* + * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "imx53.dtsi" + +/ { + model = "TQ TQMa53"; + compatible = "tq,tqma53", "fsl,imx53"; + + memory { + reg = <0x70000000 0x40000000>; /* Up to 1GiB */ + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; + wp-gpios = <&gpio1 2 0>; + cd-gpios = <&gpio1 4 0>; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_2>; + status = "disabled"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + fsl,spi-num-chipselects = <4>; + cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, + <&gpio3 24 0>, <&gpio3 25 0>; + status = "disabled"; +}; + +&esdhc3 { /* EMMC */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; + vmmc-supply = <®_3p3v>; + non-removable; + bus-width = <8>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + i2s { + pinctrl_i2s_1: i2s-grp1 { + fsl,pins = < + 1 0x10000 /* I2S_MCLK */ + 10 0x10000 /* I2S_SCLK */ + 17 0x10000 /* I2S_DOUT */ + 23 0x10000 /* I2S_LRCLK*/ + 30 0x10000 /* I2S_DIN */ + >; + }; + }; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 610 0x10000 /* MX53_PAD_EIM_CS1__IPU_DI1_PIN6 (VSYNC)*/ + 711 0x10000 /* MX53_PAD_EIM_DA15__IPU_DI1_PIN4 (HSYNC)*/ + 873 0x10000 /* MX53_PAD_PATA_DA_1__GPIO7_7 (LCD_BLT_EN)*/ + 878 0x10000 /* MX53_PAD_PATA_DA_2__GPIO7_8 (LCD_RESET)*/ + 922 0x10000 /* MX53_PAD_PATA_DATA5__GPIO2_5 (LCD_POWER)*/ + 928 0x10000 /* MX53_PAD_PATA_DATA6__GPIO2_6 (PMIC_INT)*/ + 982 0x10000 /* MX53_PAD_PATA_DATA14__GPIO2_14 (CSI_RST)*/ + 989 0x10000 /* MX53_PAD_PATA_DATA15__GPIO2_15 (CSI_PWDN)*/ + 1069 0x10000 /* MX53_PAD_GPIO_0__GPIO1_0 (SYSTEM_DOWN)*/ + 1093 0x10000 /* MX53_PAD_GPIO_3__GPIO1_3 */ + >; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; + fsl,uart-has-rtscts; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; + status = "disabled"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_2>; + status = "disabled"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2_1>; + status = "disabled"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_1>; + status = "disabled"; +}; + +&cspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cspi_1>; + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>, + <&gpio1 21 0>; + status = "disabled"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; + status = "okay"; + + pmic: mc34708@8 { + compatible = "fsl,mc34708"; + reg = <0x8>; + fsl,mc13xxx-uses-rtc; + interrupt-parent = <&gpio2>; + interrupts = <6 8>; /* PDATA_DATA6, low active */ + }; + + sensor1: lm75@48 { + compatible = "lm75"; + reg = <0x48>; + }; + + eeprom: 24c64@50 { + compatible = "at,24c64"; + pagesize = <32>; + reg = <0x50>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "rmii"; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index edc3f1eb6699..d05aa215c7f9 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -274,6 +274,44 @@ }; }; + csi { + pinctrl_csi_1: csigrp-1 { + fsl,pins = < + 286 0x1d5 /* MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN */ + 291 0x1d5 /* MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC */ + 280 0x1d5 /* MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC */ + 276 0x1d5 /* MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK */ + 409 0x1d5 /* MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 */ + 402 0x1d5 /* MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 */ + 395 0x1d5 /* MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 */ + 388 0x1d5 /* MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 */ + 381 0x1d5 /* MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 */ + 374 0x1d5 /* MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 */ + 367 0x1d5 /* MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 */ + 360 0x1d5 /* MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 */ + 352 0x1d5 /* MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 */ + 344 0x1d5 /* MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 */ + 336 0x1d5 /* MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 */ + 328 0x1d5 /* MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 */ + 320 0x1d5 /* MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 */ + 312 0x1d5 /* MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 */ + 304 0x1d5 /* MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 */ + 296 0x1d5 /* MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 */ + 276 0x1d5 /* MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK */ + >; + }; + }; + + cspi { + pinctrl_cspi_1: cspigrp-1 { + fsl,pins = < + 998 0x1d5 /* MX53_PAD_SD1_DATA0__CSPI_MISO */ + 1008 0x1d5 /* MX53_PAD_SD1_CMD__CSPI_MOSI */ + 1022 0x1d5 /* MX53_PAD_SD1_CLK__CSPI_SCLK */ + >; + }; + }; + ecspi1 { pinctrl_ecspi1_1: ecspi1grp-1 { fsl,pins = < @@ -349,6 +387,13 @@ 853 0x80000000 /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */ >; }; + + pinctrl_can1_2: can1grp-2 { + fsl,pins = < + 37 0x80000000 /* MX53_PAD_KEY_COL2__CAN1_TXCAN */ + 44 0x80000000 /* MX53_PAD_KEY_ROW2__CAN1_RXCAN */ + >; + }; }; can2 { @@ -387,6 +432,14 @@ }; }; + owire { + pinctrl_owire_1: owiregrp-1 { + fsl,pins = < + 1166 0x80000000 /* MX53_PAD_GPIO_18__OWIRE_LINE */ + >; + }; + }; + uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < @@ -421,6 +474,14 @@ 880 0x1c5 /* MX53_PAD_PATA_DA_2__UART3_RTS */ >; }; + + pinctrl_uart3_2: uart3grp-2 { + fsl,pins = < + 884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */ + 888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */ + >; + }; + }; uart4 { @@ -570,6 +631,13 @@ status = "disabled"; }; + owire: owire@63fa4000 { + compatible = "fsl,imx53-owire", "fsl,imx21-owire"; + reg = <0x63fa4000 0x4000>; + clocks = <&clks 159>; + status = "disabled"; + }; + ecspi2: ecspi@63fac000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi new file mode 100644 index 000000000000..63fafe2a606c --- /dev/null +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -0,0 +1,59 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/include/ "imx6qdl.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + }; + + soc { + aips1: aips-bus@02000000 { + pxp: pxp@020f0000 { + reg = <0x020f0000 0x4000>; + interrupts = <0 98 0x04>; + }; + + epdc: epdc@020f4000 { + reg = <0x020f4000 0x4000>; + interrupts = <0 97 0x04>; + }; + + lcdif: lcdif@020f8000 { + reg = <0x020f8000 0x4000>; + interrupts = <0 39 0x04>; + }; + }; + + aips2: aips-bus@02100000 { + i2c4: i2c@021f8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx1-i2c"; + reg = <0x021f8000 0x4000>; + interrupts = <0 35 0x04>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 5bfa02a3f85c..53eb241fa5ad 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -21,71 +21,6 @@ reg = <0x10000000 0x80000000>; }; - soc { - gpmi-nand@00112000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand_1>; - status = "disabled"; /* gpmi nand conflicts with SD */ - }; - - aips-bus@02000000 { /* AIPS1 */ - iomuxc@020e0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */ - >; - }; - }; - - arm2 { - pinctrl_usdhc3_arm2: usdhc3grp-arm2 { - fsl,pins = < - 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */ - 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */ - >; - }; - }; - }; - }; - - aips-bus@02100000 { /* AIPS2 */ - ethernet@02188000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_2>; - phy-mode = "rgmii"; - status = "okay"; - }; - - usdhc@02198000 { /* uSDHC3 */ - cd-gpios = <&gpio6 11 0>; - wp-gpios = <&gpio6 14 0>; - vmmc-supply = <®_3p3v>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1 - &pinctrl_usdhc3_arm2>; - status = "okay"; - }; - - usdhc@0219c000 { /* uSDHC4 */ - non-removable; - vmmc-supply = <®_3p3v>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc4_1>; - status = "okay"; - }; - - uart4: serial@021f0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4_1>; - status = "okay"; - }; - }; - }; - regulators { compatible = "simple-bus"; @@ -108,3 +43,62 @@ }; }; }; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand_1>; + status = "disabled"; /* gpmi nand conflicts with SD */ +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */ + >; + }; + }; + + arm2 { + pinctrl_usdhc3_arm2: usdhc3grp-arm2 { + fsl,pins = < + 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */ + 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */ + >; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_2>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&usdhc3 { + cd-gpios = <&gpio6 11 0>; + wp-gpios = <&gpio6 14 0>; + vmmc-supply = <®_3p3v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1 + &pinctrl_usdhc3_arm2>; + status = "okay"; +}; + +&usdhc4 { + non-removable; + vmmc-supply = <®_3p3v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4_1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts index 826e4ad1477e..656d489122fe 100644 --- a/arch/arm/boot/dts/imx6q-sabreauto.dts +++ b/arch/arm/boot/dts/imx6q-sabreauto.dts @@ -20,45 +20,39 @@ memory { reg = <0x10000000 0x80000000>; }; +}; - soc { - aips-bus@02000000 { /* AIPS1 */ - iomuxc@020e0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */ - 13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */ - >; - }; - }; - }; + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */ + 13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */ + >; }; + }; +}; - aips-bus@02100000 { /* AIPS2 */ - uart4: serial@021f0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4_1>; - status = "okay"; - }; +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; + status = "okay"; +}; - ethernet@02188000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_2>; - phy-mode = "rgmii"; - status = "okay"; - }; +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_2>; + phy-mode = "rgmii"; + status = "okay"; +}; - usdhc@02198000 { /* uSDHC3 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1>; - cd-gpios = <&gpio6 15 0>; - wp-gpios = <&gpio1 13 0>; - status = "okay"; - }; - }; - }; +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; + cd-gpios = <&gpio6 15 0>; + wp-gpios = <&gpio1 13 0>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index d152328285a1..2ce355cd05e5 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -21,118 +21,6 @@ reg = <0x10000000 0x40000000>; }; - soc { - aips-bus@02000000 { /* AIPS1 */ - spba-bus@02000000 { - ecspi@02008000 { /* eCSPI1 */ - fsl,spi-num-chipselects = <1>; - cs-gpios = <&gpio3 19 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1_1>; - status = "okay"; - - flash: m25p80@0 { - compatible = "sst,sst25vf016b"; - spi-max-frequency = <20000000>; - reg = <0>; - }; - }; - - ssi1: ssi@02028000 { - fsl,mode = "i2s-slave"; - status = "okay"; - }; - }; - - iomuxc@020e0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */ - 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */ - 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ - 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ - 152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */ - 1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */ - 1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */ - 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ - >; - }; - }; - }; - }; - - aips-bus@02100000 { /* AIPS2 */ - usb@02184000 { /* USB OTG */ - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_1>; - disable-over-current; - status = "okay"; - }; - - usb@02184200 { /* USB1 */ - status = "okay"; - }; - - ethernet@02188000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 0>; - status = "okay"; - }; - - usdhc@02198000 { /* uSDHC3 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_2>; - cd-gpios = <&gpio7 0 0>; - wp-gpios = <&gpio7 1 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - usdhc@0219c000 { /* uSDHC4 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc4_2>; - cd-gpios = <&gpio2 6 0>; - wp-gpios = <&gpio2 7 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - audmux@021d8000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; - }; - - uart2: serial@021e8000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_1>; - }; - - i2c@021a0000 { /* I2C1 */ - status = "okay"; - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clks 169>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; - }; - }; - }; - }; - regulators { compatible = "simple-bus"; @@ -176,3 +64,107 @@ mux-ext-port = <4>; }; }; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "sst,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */ + 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */ + 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ + 152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */ + 1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */ + 1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */ + 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ + >; + }; + }; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 0>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; + cd-gpios = <&gpio7 0 0>; + wp-gpios = <&gpio7 1 0>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4_2>; + cd-gpios = <&gpio2 6 0>; + wp-gpios = <&gpio2 7 0>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&audmux { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 169>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index a42402562b7b..2dea304a7980 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -21,61 +21,6 @@ reg = <0x10000000 0x40000000>; }; - soc { - aips-bus@02000000 { /* AIPS1 */ - spba-bus@02000000 { - uart1: serial@02020000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; - status = "okay"; - }; - }; - - iomuxc@020e0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */ - 1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */ - 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */ - 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */ - 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */ - 1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */ - >; - }; - }; - }; - }; - - aips-bus@02100000 { /* AIPS2 */ - ethernet@02188000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - status = "okay"; - }; - - usdhc@02194000 { /* uSDHC2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2_1>; - cd-gpios = <&gpio2 2 0>; - wp-gpios = <&gpio2 3 0>; - status = "okay"; - }; - - usdhc@02198000 { /* uSDHC3 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1>; - cd-gpios = <&gpio2 0 0>; - wp-gpios = <&gpio2 1 0>; - status = "okay"; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -92,3 +37,50 @@ }; }; }; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */ + 1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */ + 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */ + 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */ + 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */ + 1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */ + >; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_1>; + cd-gpios = <&gpio2 2 0>; + wp-gpios = <&gpio2 3 0>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; + cd-gpios = <&gpio2 0 0>; + wp-gpios = <&gpio2 1 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index ff1205ea5719..cba021eb035e 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -1,33 +1,16 @@ + /* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. + * Copyright 2013 Freescale Semiconductor, Inc. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +/include/ "imx6qdl.dtsi" / { - aliases { - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - serial4 = &uart5; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; - gpio5 = &gpio6; - gpio6 = &gpio7; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -38,12 +21,19 @@ next-level-cache = <&L2>; operating-points = < /* kHz uV */ - 792000 1100000 + 1200000 1275000 + 996000 1250000 + 792000 1150000 396000 950000 - 198000 850000 >; clock-latency = <61036>; /* two CLK32 periods */ - cpu0-supply = <®_cpu>; + clocks = <&clks 104>, <&clks 6>, <&clks 16>, + <&clks 17>, <&clks 170>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; cpu@1 { @@ -65,142 +55,9 @@ }; }; - intc: interrupt-controller@00a01000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; - interrupt-controller; - reg = <0x00a01000 0x1000>, - <0x00a00100 0x100>; - }; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - ckil { - compatible = "fsl,imx-ckil", "fixed-clock"; - clock-frequency = <32768>; - }; - - ckih1 { - compatible = "fsl,imx-ckih1", "fixed-clock"; - clock-frequency = <0>; - }; - - osc { - compatible = "fsl,imx-osc", "fixed-clock"; - clock-frequency = <24000000>; - }; - }; - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&intc>; - ranges; - - dma-apbh@00110000 { - compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; - reg = <0x00110000 0x2000>; - clocks = <&clks 106>; - }; - - nfc: gpmi-nand@00112000 { - compatible = "fsl,imx6q-gpmi-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x00112000 0x2000>, <0x00114000 0x2000>; - reg-names = "gpmi-nand", "bch"; - interrupts = <0 13 0x04>, <0 15 0x04>; - interrupt-names = "gpmi-dma", "bch"; - clocks = <&clks 152>, <&clks 153>, <&clks 151>, - <&clks 150>, <&clks 149>; - clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", - "gpmi_bch_apb", "per1_bch"; - fsl,gpmi-dma-channel = <0>; - status = "disabled"; - }; - - timer@00a00600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x00a00600 0x20>; - interrupts = <1 13 0xf01>; - }; - - L2: l2-cache@00a02000 { - compatible = "arm,pl310-cache"; - reg = <0x00a02000 0x1000>; - interrupts = <0 92 0x04>; - cache-unified; - cache-level = <2>; - }; - aips-bus@02000000 { /* AIPS1 */ - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x02000000 0x100000>; - ranges; - spba-bus@02000000 { - compatible = "fsl,spba-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x02000000 0x40000>; - ranges; - - spdif: spdif@02004000 { - reg = <0x02004000 0x4000>; - interrupts = <0 52 0x04>; - }; - - ecspi1: ecspi@02008000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; - reg = <0x02008000 0x4000>; - interrupts = <0 31 0x04>; - clocks = <&clks 112>, <&clks 112>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - ecspi2: ecspi@0200c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; - reg = <0x0200c000 0x4000>; - interrupts = <0 32 0x04>; - clocks = <&clks 113>, <&clks 113>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - ecspi3: ecspi@02010000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; - reg = <0x02010000 0x4000>; - interrupts = <0 33 0x04>; - clocks = <&clks 114>, <&clks 114>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - ecspi4: ecspi@02014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; - reg = <0x02014000 0x4000>; - interrupts = <0 34 0x04>; - clocks = <&clks 115>, <&clks 115>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - ecspi5: ecspi@02018000 { #address-cells = <1>; #size-cells = <0>; @@ -211,361 +68,6 @@ clock-names = "ipg", "per"; status = "disabled"; }; - - uart1: serial@02020000 { - compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x02020000 0x4000>; - interrupts = <0 26 0x04>; - clocks = <&clks 160>, <&clks 161>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - esai: esai@02024000 { - reg = <0x02024000 0x4000>; - interrupts = <0 51 0x04>; - }; - - ssi1: ssi@02028000 { - compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; - reg = <0x02028000 0x4000>; - interrupts = <0 46 0x04>; - clocks = <&clks 178>; - fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <38 37>; - status = "disabled"; - }; - - ssi2: ssi@0202c000 { - compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; - reg = <0x0202c000 0x4000>; - interrupts = <0 47 0x04>; - clocks = <&clks 179>; - fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <42 41>; - status = "disabled"; - }; - - ssi3: ssi@02030000 { - compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; - reg = <0x02030000 0x4000>; - interrupts = <0 48 0x04>; - clocks = <&clks 180>; - fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <46 45>; - status = "disabled"; - }; - - asrc: asrc@02034000 { - reg = <0x02034000 0x4000>; - interrupts = <0 50 0x04>; - }; - - spba@0203c000 { - reg = <0x0203c000 0x4000>; - }; - }; - - vpu: vpu@02040000 { - reg = <0x02040000 0x3c000>; - interrupts = <0 3 0x04 0 12 0x04>; - }; - - aipstz@0207c000 { /* AIPSTZ1 */ - reg = <0x0207c000 0x4000>; - }; - - pwm1: pwm@02080000 { - #pwm-cells = <2>; - compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; - reg = <0x02080000 0x4000>; - interrupts = <0 83 0x04>; - clocks = <&clks 62>, <&clks 145>; - clock-names = "ipg", "per"; - }; - - pwm2: pwm@02084000 { - #pwm-cells = <2>; - compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; - reg = <0x02084000 0x4000>; - interrupts = <0 84 0x04>; - clocks = <&clks 62>, <&clks 146>; - clock-names = "ipg", "per"; - }; - - pwm3: pwm@02088000 { - #pwm-cells = <2>; - compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; - reg = <0x02088000 0x4000>; - interrupts = <0 85 0x04>; - clocks = <&clks 62>, <&clks 147>; - clock-names = "ipg", "per"; - }; - - pwm4: pwm@0208c000 { - #pwm-cells = <2>; - compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; - reg = <0x0208c000 0x4000>; - interrupts = <0 86 0x04>; - clocks = <&clks 62>, <&clks 148>; - clock-names = "ipg", "per"; - }; - - can1: flexcan@02090000 { - reg = <0x02090000 0x4000>; - interrupts = <0 110 0x04>; - }; - - can2: flexcan@02094000 { - reg = <0x02094000 0x4000>; - interrupts = <0 111 0x04>; - }; - - gpt: gpt@02098000 { - compatible = "fsl,imx6q-gpt"; - reg = <0x02098000 0x4000>; - interrupts = <0 55 0x04>; - }; - - gpio1: gpio@0209c000 { - compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; - reg = <0x0209c000 0x4000>; - interrupts = <0 66 0x04 0 67 0x04>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@020a0000 { - compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; - reg = <0x020a0000 0x4000>; - interrupts = <0 68 0x04 0 69 0x04>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@020a4000 { - compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; - reg = <0x020a4000 0x4000>; - interrupts = <0 70 0x04 0 71 0x04>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@020a8000 { - compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; - reg = <0x020a8000 0x4000>; - interrupts = <0 72 0x04 0 73 0x04>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@020ac000 { - compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; - reg = <0x020ac000 0x4000>; - interrupts = <0 74 0x04 0 75 0x04>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio6: gpio@020b0000 { - compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; - reg = <0x020b0000 0x4000>; - interrupts = <0 76 0x04 0 77 0x04>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio7: gpio@020b4000 { - compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; - reg = <0x020b4000 0x4000>; - interrupts = <0 78 0x04 0 79 0x04>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - kpp: kpp@020b8000 { - reg = <0x020b8000 0x4000>; - interrupts = <0 82 0x04>; - }; - - wdog1: wdog@020bc000 { - compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; - reg = <0x020bc000 0x4000>; - interrupts = <0 80 0x04>; - clocks = <&clks 0>; - }; - - wdog2: wdog@020c0000 { - compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; - reg = <0x020c0000 0x4000>; - interrupts = <0 81 0x04>; - clocks = <&clks 0>; - status = "disabled"; - }; - - clks: ccm@020c4000 { - compatible = "fsl,imx6q-ccm"; - reg = <0x020c4000 0x4000>; - interrupts = <0 87 0x04 0 88 0x04>; - #clock-cells = <1>; - }; - - anatop: anatop@020c8000 { - compatible = "fsl,imx6q-anatop", "syscon", "simple-bus"; - reg = <0x020c8000 0x1000>; - interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; - - regulator-1p1@110 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vdd1p1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1375000>; - regulator-always-on; - anatop-reg-offset = <0x110>; - anatop-vol-bit-shift = <8>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <4>; - anatop-min-voltage = <800000>; - anatop-max-voltage = <1375000>; - }; - - regulator-3p0@120 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vdd3p0"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3150000>; - regulator-always-on; - anatop-reg-offset = <0x120>; - anatop-vol-bit-shift = <8>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <0>; - anatop-min-voltage = <2625000>; - anatop-max-voltage = <3400000>; - }; - - regulator-2p5@130 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vdd2p5"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2750000>; - regulator-always-on; - anatop-reg-offset = <0x130>; - anatop-vol-bit-shift = <8>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <0>; - anatop-min-voltage = <2000000>; - anatop-max-voltage = <2750000>; - }; - - reg_cpu: regulator-vddcore@140 { - compatible = "fsl,anatop-regulator"; - regulator-name = "cpu"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1450000>; - regulator-always-on; - anatop-reg-offset = <0x140>; - anatop-vol-bit-shift = <0>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <1>; - anatop-min-voltage = <725000>; - anatop-max-voltage = <1450000>; - }; - - regulator-vddpu@140 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vddpu"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1450000>; - regulator-always-on; - anatop-reg-offset = <0x140>; - anatop-vol-bit-shift = <9>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <1>; - anatop-min-voltage = <725000>; - anatop-max-voltage = <1450000>; - }; - - regulator-vddsoc@140 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vddsoc"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1450000>; - regulator-always-on; - anatop-reg-offset = <0x140>; - anatop-vol-bit-shift = <18>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <1>; - anatop-min-voltage = <725000>; - anatop-max-voltage = <1450000>; - }; - }; - - usbphy1: usbphy@020c9000 { - compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; - reg = <0x020c9000 0x1000>; - interrupts = <0 44 0x04>; - clocks = <&clks 182>; - }; - - usbphy2: usbphy@020ca000 { - compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; - reg = <0x020ca000 0x1000>; - interrupts = <0 45 0x04>; - clocks = <&clks 183>; - }; - - snvs@020cc000 { - compatible = "fsl,sec-v4.0-mon", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x020cc000 0x4000>; - - snvs-rtc-lp@34 { - compatible = "fsl,sec-v4.0-mon-rtc-lp"; - reg = <0x34 0x58>; - interrupts = <0 19 0x04 0 20 0x04>; - }; - }; - - epit1: epit@020d0000 { /* EPIT1 */ - reg = <0x020d0000 0x4000>; - interrupts = <0 56 0x04>; - }; - - epit2: epit@020d4000 { /* EPIT2 */ - reg = <0x020d4000 0x4000>; - interrupts = <0 57 0x04>; - }; - - src: src@020d8000 { - compatible = "fsl,imx6q-src"; - reg = <0x020d8000 0x4000>; - interrupts = <0 91 0x04 0 96 0x04>; - }; - - gpc: gpc@020dc000 { - compatible = "fsl,imx6q-gpc"; - reg = <0x020dc000 0x4000>; - interrupts = <0 89 0x04 0 90 0x04>; - }; - - gpr: iomuxc-gpr@020e0000 { - compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; - reg = <0x020e0000 0x38>; }; iomuxc: iomuxc@020e0000 { @@ -780,272 +282,6 @@ }; }; }; - - dcic1: dcic@020e4000 { - reg = <0x020e4000 0x4000>; - interrupts = <0 124 0x04>; - }; - - dcic2: dcic@020e8000 { - reg = <0x020e8000 0x4000>; - interrupts = <0 125 0x04>; - }; - - sdma: sdma@020ec000 { - compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; - reg = <0x020ec000 0x4000>; - interrupts = <0 2 0x04>; - clocks = <&clks 155>, <&clks 155>; - clock-names = "ipg", "ahb"; - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin"; - }; - }; - - aips-bus@02100000 { /* AIPS2 */ - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x02100000 0x100000>; - ranges; - - caam@02100000 { - reg = <0x02100000 0x40000>; - interrupts = <0 105 0x04 0 106 0x04>; - }; - - aipstz@0217c000 { /* AIPSTZ2 */ - reg = <0x0217c000 0x4000>; - }; - - usbotg: usb@02184000 { - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; - reg = <0x02184000 0x200>; - interrupts = <0 43 0x04>; - clocks = <&clks 162>; - fsl,usbphy = <&usbphy1>; - fsl,usbmisc = <&usbmisc 0>; - status = "disabled"; - }; - - usbh1: usb@02184200 { - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; - reg = <0x02184200 0x200>; - interrupts = <0 40 0x04>; - clocks = <&clks 162>; - fsl,usbphy = <&usbphy2>; - fsl,usbmisc = <&usbmisc 1>; - status = "disabled"; - }; - - usbh2: usb@02184400 { - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; - reg = <0x02184400 0x200>; - interrupts = <0 41 0x04>; - clocks = <&clks 162>; - fsl,usbmisc = <&usbmisc 2>; - status = "disabled"; - }; - - usbh3: usb@02184600 { - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; - reg = <0x02184600 0x200>; - interrupts = <0 42 0x04>; - clocks = <&clks 162>; - fsl,usbmisc = <&usbmisc 3>; - status = "disabled"; - }; - - usbmisc: usbmisc: usbmisc@02184800 { - #index-cells = <1>; - compatible = "fsl,imx6q-usbmisc"; - reg = <0x02184800 0x200>; - clocks = <&clks 162>; - }; - - fec: ethernet@02188000 { - compatible = "fsl,imx6q-fec"; - reg = <0x02188000 0x4000>; - interrupts = <0 118 0x04 0 119 0x04>; - clocks = <&clks 117>, <&clks 117>, <&clks 190>; - clock-names = "ipg", "ahb", "ptp"; - status = "disabled"; - }; - - mlb@0218c000 { - reg = <0x0218c000 0x4000>; - interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>; - }; - - usdhc1: usdhc@02190000 { - compatible = "fsl,imx6q-usdhc"; - reg = <0x02190000 0x4000>; - interrupts = <0 22 0x04>; - clocks = <&clks 163>, <&clks 163>, <&clks 163>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - status = "disabled"; - }; - - usdhc2: usdhc@02194000 { - compatible = "fsl,imx6q-usdhc"; - reg = <0x02194000 0x4000>; - interrupts = <0 23 0x04>; - clocks = <&clks 164>, <&clks 164>, <&clks 164>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - status = "disabled"; - }; - - usdhc3: usdhc@02198000 { - compatible = "fsl,imx6q-usdhc"; - reg = <0x02198000 0x4000>; - interrupts = <0 24 0x04>; - clocks = <&clks 165>, <&clks 165>, <&clks 165>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - status = "disabled"; - }; - - usdhc4: usdhc@0219c000 { - compatible = "fsl,imx6q-usdhc"; - reg = <0x0219c000 0x4000>; - interrupts = <0 25 0x04>; - clocks = <&clks 166>, <&clks 166>, <&clks 166>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - status = "disabled"; - }; - - i2c1: i2c@021a0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; - reg = <0x021a0000 0x4000>; - interrupts = <0 36 0x04>; - clocks = <&clks 125>; - status = "disabled"; - }; - - i2c2: i2c@021a4000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; - reg = <0x021a4000 0x4000>; - interrupts = <0 37 0x04>; - clocks = <&clks 126>; - status = "disabled"; - }; - - i2c3: i2c@021a8000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; - reg = <0x021a8000 0x4000>; - interrupts = <0 38 0x04>; - clocks = <&clks 127>; - status = "disabled"; - }; - - romcp@021ac000 { - reg = <0x021ac000 0x4000>; - }; - - mmdc0: mmdc@021b0000 { /* MMDC0 */ - compatible = "fsl,imx6q-mmdc"; - reg = <0x021b0000 0x4000>; - }; - - mmdc1: mmdc@021b4000 { /* MMDC1 */ - reg = <0x021b4000 0x4000>; - }; - - weim@021b8000 { - reg = <0x021b8000 0x4000>; - interrupts = <0 14 0x04>; - }; - - ocotp@021bc000 { - reg = <0x021bc000 0x4000>; - }; - - ocotp@021c0000 { - reg = <0x021c0000 0x4000>; - interrupts = <0 21 0x04>; - }; - - tzasc@021d0000 { /* TZASC1 */ - reg = <0x021d0000 0x4000>; - interrupts = <0 108 0x04>; - }; - - tzasc@021d4000 { /* TZASC2 */ - reg = <0x021d4000 0x4000>; - interrupts = <0 109 0x04>; - }; - - audmux: audmux@021d8000 { - compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; - reg = <0x021d8000 0x4000>; - status = "disabled"; - }; - - mipi@021dc000 { /* MIPI-CSI */ - reg = <0x021dc000 0x4000>; - }; - - mipi@021e0000 { /* MIPI-DSI */ - reg = <0x021e0000 0x4000>; - }; - - vdoa@021e4000 { - reg = <0x021e4000 0x4000>; - interrupts = <0 18 0x04>; - }; - - uart2: serial@021e8000 { - compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x021e8000 0x4000>; - interrupts = <0 27 0x04>; - clocks = <&clks 160>, <&clks 161>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart3: serial@021ec000 { - compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x021ec000 0x4000>; - interrupts = <0 28 0x04>; - clocks = <&clks 160>, <&clks 161>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart4: serial@021f0000 { - compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x021f0000 0x4000>; - interrupts = <0 29 0x04>; - clocks = <&clks 160>, <&clks 161>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart5: serial@021f4000 { - compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x021f4000 0x4000>; - interrupts = <0 30 0x04>; - clocks = <&clks 160>, <&clks 161>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - }; - - ipu1: ipu@02400000 { - #crtc-cells = <1>; - compatible = "fsl,imx6q-ipu"; - reg = <0x02400000 0x400000>; - interrupts = <0 6 0x4 0 5 0x4>; - clocks = <&clks 130>, <&clks 131>, <&clks 132>; - clock-names = "bus", "di0", "di1"; }; ipu2: ipu@02800000 { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi new file mode 100644 index 000000000000..06ec460b4581 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -0,0 +1,800 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil { + compatible = "fsl,imx-ckil", "fixed-clock"; + clock-frequency = <32768>; + }; + + ckih1 { + compatible = "fsl,imx-ckih1", "fixed-clock"; + clock-frequency = <0>; + }; + + osc { + compatible = "fsl,imx-osc", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + dma-apbh@00110000 { + compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x00110000 0x2000>; + clocks = <&clks 106>; + }; + + gpmi: gpmi-nand@00112000 { + compatible = "fsl,imx6q-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00112000 0x2000>, <0x00114000 0x2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <0 13 0x04>, <0 15 0x04>; + interrupt-names = "gpmi-dma", "bch"; + clocks = <&clks 152>, <&clks 153>, <&clks 151>, + <&clks 150>, <&clks 149>; + clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", + "gpmi_bch_apb", "per1_bch"; + fsl,gpmi-dma-channel = <0>; + status = "disabled"; + }; + + timer@00a00600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x00a00600 0x20>; + interrupts = <1 13 0xf01>; + }; + + L2: l2-cache@00a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = <0 92 0x04>; + cache-unified; + cache-level = <2>; + }; + + aips-bus@02000000 { /* AIPS1 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@02004000 { + reg = <0x02004000 0x4000>; + interrupts = <0 52 0x04>; + }; + + ecspi1: ecspi@02008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <0 31 0x04>; + clocks = <&clks 112>, <&clks 112>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi@0200c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <0 32 0x04>; + clocks = <&clks 113>, <&clks 113>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi@02010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <0 33 0x04>; + clocks = <&clks 114>, <&clks 114>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: ecspi@02014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <0 34 0x04>; + clocks = <&clks 115>, <&clks 115>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@02020000 { + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <0 26 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + esai: esai@02024000 { + reg = <0x02024000 0x4000>; + interrupts = <0 51 0x04>; + }; + + ssi1: ssi@02028000 { + compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; + reg = <0x02028000 0x4000>; + interrupts = <0 46 0x04>; + clocks = <&clks 178>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <38 37>; + status = "disabled"; + }; + + ssi2: ssi@0202c000 { + compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; + reg = <0x0202c000 0x4000>; + interrupts = <0 47 0x04>; + clocks = <&clks 179>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <42 41>; + status = "disabled"; + }; + + ssi3: ssi@02030000 { + compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; + reg = <0x02030000 0x4000>; + interrupts = <0 48 0x04>; + clocks = <&clks 180>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <46 45>; + status = "disabled"; + }; + + asrc: asrc@02034000 { + reg = <0x02034000 0x4000>; + interrupts = <0 50 0x04>; + }; + + spba@0203c000 { + reg = <0x0203c000 0x4000>; + }; + }; + + vpu: vpu@02040000 { + reg = <0x02040000 0x3c000>; + interrupts = <0 3 0x04 0 12 0x04>; + }; + + aipstz@0207c000 { /* AIPSTZ1 */ + reg = <0x0207c000 0x4000>; + }; + + pwm1: pwm@02080000 { + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = <0 83 0x04>; + clocks = <&clks 62>, <&clks 145>; + clock-names = "ipg", "per"; + }; + + pwm2: pwm@02084000 { + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = <0 84 0x04>; + clocks = <&clks 62>, <&clks 146>; + clock-names = "ipg", "per"; + }; + + pwm3: pwm@02088000 { + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = <0 85 0x04>; + clocks = <&clks 62>, <&clks 147>; + clock-names = "ipg", "per"; + }; + + pwm4: pwm@0208c000 { + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = <0 86 0x04>; + clocks = <&clks 62>, <&clks 148>; + clock-names = "ipg", "per"; + }; + + can1: flexcan@02090000 { + reg = <0x02090000 0x4000>; + interrupts = <0 110 0x04>; + }; + + can2: flexcan@02094000 { + reg = <0x02094000 0x4000>; + interrupts = <0 111 0x04>; + }; + + gpt: gpt@02098000 { + compatible = "fsl,imx6q-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <0 55 0x04>; + }; + + gpio1: gpio@0209c000 { + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <0 66 0x04 0 67 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@020a0000 { + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <0 68 0x04 0 69 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@020a4000 { + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <0 70 0x04 0 71 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@020a8000 { + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <0 72 0x04 0 73 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@020ac000 { + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <0 74 0x04 0 75 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@020b0000 { + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; + reg = <0x020b0000 0x4000>; + interrupts = <0 76 0x04 0 77 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@020b4000 { + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; + reg = <0x020b4000 0x4000>; + interrupts = <0 78 0x04 0 79 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + kpp: kpp@020b8000 { + reg = <0x020b8000 0x4000>; + interrupts = <0 82 0x04>; + }; + + wdog1: wdog@020bc000 { + compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <0 80 0x04>; + clocks = <&clks 0>; + }; + + wdog2: wdog@020c0000 { + compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <0 81 0x04>; + clocks = <&clks 0>; + status = "disabled"; + }; + + clks: ccm@020c4000 { + compatible = "fsl,imx6q-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 0x04 0 88 0x04>; + #clock-cells = <1>; + }; + + anatop: anatop@020c8000 { + compatible = "fsl,imx6q-anatop", "syscon", "simple-bus"; + reg = <0x020c8000 0x1000>; + interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; + + regulator-1p1@110 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1375000>; + regulator-always-on; + anatop-reg-offset = <0x110>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <4>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1375000>; + }; + + regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + }; + + regulator-2p5@130 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2750000>; + regulator-always-on; + anatop-reg-offset = <0x130>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2000000>; + anatop-max-voltage = <2750000>; + }; + + reg_arm: regulator-vddcore@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "cpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_pu: regulator-vddpu@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <26>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + }; + + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <0 44 0x04>; + clocks = <&clks 182>; + }; + + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = <0 45 0x04>; + clocks = <&clks 183>; + }; + + snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x020cc000 0x4000>; + + snvs-rtc-lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + interrupts = <0 19 0x04 0 20 0x04>; + }; + }; + + epit1: epit@020d0000 { /* EPIT1 */ + reg = <0x020d0000 0x4000>; + interrupts = <0 56 0x04>; + }; + + epit2: epit@020d4000 { /* EPIT2 */ + reg = <0x020d4000 0x4000>; + interrupts = <0 57 0x04>; + }; + + src: src@020d8000 { + compatible = "fsl,imx6q-src"; + reg = <0x020d8000 0x4000>; + interrupts = <0 91 0x04 0 96 0x04>; + }; + + gpc: gpc@020dc000 { + compatible = "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupts = <0 89 0x04 0 90 0x04>; + }; + + gpr: iomuxc-gpr@020e0000 { + compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e0000 0x38>; + }; + + dcic1: dcic@020e4000 { + reg = <0x020e4000 0x4000>; + interrupts = <0 124 0x04>; + }; + + dcic2: dcic@020e8000 { + reg = <0x020e8000 0x4000>; + interrupts = <0 125 0x04>; + }; + + sdma: sdma@020ec000 { + compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <0 2 0x04>; + clocks = <&clks 155>, <&clks 155>; + clock-names = "ipg", "ahb"; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + }; + + aips-bus@02100000 { /* AIPS2 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + caam@02100000 { + reg = <0x02100000 0x40000>; + interrupts = <0 105 0x04 0 106 0x04>; + }; + + aipstz@0217c000 { /* AIPSTZ2 */ + reg = <0x0217c000 0x4000>; + }; + + usbotg: usb@02184000 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <0 43 0x04>; + clocks = <&clks 162>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + status = "disabled"; + }; + + usbh1: usb@02184200 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <0 40 0x04>; + clocks = <&clks 162>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + status = "disabled"; + }; + + usbh2: usb@02184400 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <0 41 0x04>; + clocks = <&clks 162>; + fsl,usbmisc = <&usbmisc 2>; + status = "disabled"; + }; + + usbh3: usb@02184600 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184600 0x200>; + interrupts = <0 42 0x04>; + clocks = <&clks 162>; + fsl,usbmisc = <&usbmisc 3>; + status = "disabled"; + }; + + usbmisc: usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + clocks = <&clks 162>; + }; + + fec: ethernet@02188000 { + compatible = "fsl,imx6q-fec"; + reg = <0x02188000 0x4000>; + interrupts = <0 118 0x04 0 119 0x04>; + clocks = <&clks 117>, <&clks 117>, <&clks 190>; + clock-names = "ipg", "ahb", "ptp"; + status = "disabled"; + }; + + mlb@0218c000 { + reg = <0x0218c000 0x4000>; + interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>; + }; + + usdhc1: usdhc@02190000 { + compatible = "fsl,imx6q-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <0 22 0x04>; + clocks = <&clks 163>, <&clks 163>, <&clks 163>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@02194000 { + compatible = "fsl,imx6q-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <0 23 0x04>; + clocks = <&clks 164>, <&clks 164>, <&clks 164>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: usdhc@02198000 { + compatible = "fsl,imx6q-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = <0 24 0x04>; + clocks = <&clks 165>, <&clks 165>, <&clks 165>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc4: usdhc@0219c000 { + compatible = "fsl,imx6q-usdhc"; + reg = <0x0219c000 0x4000>; + interrupts = <0 25 0x04>; + clocks = <&clks 166>, <&clks 166>, <&clks 166>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + i2c1: i2c@021a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <0 36 0x04>; + clocks = <&clks 125>; + status = "disabled"; + }; + + i2c2: i2c@021a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <0 37 0x04>; + clocks = <&clks 126>; + status = "disabled"; + }; + + i2c3: i2c@021a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <0 38 0x04>; + clocks = <&clks 127>; + status = "disabled"; + }; + + romcp@021ac000 { + reg = <0x021ac000 0x4000>; + }; + + mmdc0: mmdc@021b0000 { /* MMDC0 */ + compatible = "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + mmdc1: mmdc@021b4000 { /* MMDC1 */ + reg = <0x021b4000 0x4000>; + }; + + weim@021b8000 { + reg = <0x021b8000 0x4000>; + interrupts = <0 14 0x04>; + }; + + ocotp@021bc000 { + compatible = "fsl,imx6q-ocotp"; + reg = <0x021bc000 0x4000>; + }; + + ocotp@021c0000 { + reg = <0x021c0000 0x4000>; + interrupts = <0 21 0x04>; + }; + + tzasc@021d0000 { /* TZASC1 */ + reg = <0x021d0000 0x4000>; + interrupts = <0 108 0x04>; + }; + + tzasc@021d4000 { /* TZASC2 */ + reg = <0x021d4000 0x4000>; + interrupts = <0 109 0x04>; + }; + + audmux: audmux@021d8000 { + compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + status = "disabled"; + }; + + mipi@021dc000 { /* MIPI-CSI */ + reg = <0x021dc000 0x4000>; + }; + + mipi@021e0000 { /* MIPI-DSI */ + reg = <0x021e0000 0x4000>; + }; + + vdoa@021e4000 { + reg = <0x021e4000 0x4000>; + interrupts = <0 18 0x04>; + }; + + uart2: serial@021e8000 { + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021e8000 0x4000>; + interrupts = <0 27 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@021ec000 { + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021ec000 0x4000>; + interrupts = <0 28 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart4: serial@021f0000 { + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021f0000 0x4000>; + interrupts = <0 29 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart5: serial@021f4000 { + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021f4000 0x4000>; + interrupts = <0 30 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + ipu1: ipu@02400000 { + #crtc-cells = <1>; + compatible = "fsl,imx6q-ipu"; + reg = <0x02400000 0x400000>; + interrupts = <0 6 0x4 0 5 0x4>; + clocks = <&clks 130>, <&clks 131>, <&clks 132>; + clock-names = "bus", "di0", "di1"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 4ccea2130a6c..192cf76fbf93 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -5,6 +5,12 @@ compatible = "marvell,88f6282-pinctrl"; reg = <0x10000 0x20>; + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", "mpp19"; + marvell,function = "nand"; + }; + pmx_sata0: pmx-sata0 { marvell,pins = "mpp5", "mpp21", "mpp23"; marvell,function = "sata0"; @@ -21,6 +27,12 @@ marvell,pins = "mpp8", "mpp9"; marvell,function = "twsi0"; }; + + pmx_twsi1: pmx-twsi1 { + marvell,pins = "mpp36", "mpp37"; + marvell,function = "twsi1"; + }; + pmx_uart0: pmx-uart0 { marvell,pins = "mpp10", "mpp11"; marvell,function = "uart0"; @@ -30,6 +42,11 @@ marvell,pins = "mpp13", "mpp14"; marvell,function = "uart1"; }; + pmx_sdio: pmx-sdio { + marvell,pins = "mpp12", "mpp13", "mpp14", + "mpp15", "mpp16", "mpp17"; + marvell,function = "sdio"; + }; }; i2c@11100 { diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index 5bb0bf39d3b8..c9c44b2f62d7 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -42,12 +42,10 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <166666667>; status = "okay"; }; serial@12100 { - clock-frequency = <166666667>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index d430713ea9b9..e4e4930dc5cf 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -50,7 +50,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 2e3dd34e21a5..0196cf6b0ef2 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -37,7 +37,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index f2d386c95b07..289e51d86372 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -38,7 +38,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; @@ -74,6 +73,13 @@ status = "okay"; nr-ports = <1>; }; + + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 1b133e0c566e..bd83b8fc7c83 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -73,7 +73,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts new file mode 100644 index 000000000000..9555a86297c2 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -0,0 +1,94 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + model = "Globalscale Technologies Guruplug Server Plus"; + compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g + &pmx_led_wmode_r &pmx_led_wmode_g >; + pinctrl-names = "default"; + + pmx_led_health_r: pmx-led-health-r { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_health_g: pmx-led-health-g { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_led_wmode_r: pmx-led-wmode-r { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + pmx_led_wmode_g: pmx-led-wmode-g { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + }; + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x00100000 0x00400000>; + }; + + partition@500000 { + label = "data"; + reg = <0x00500000 0x1fb00000>; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + health-r { + label = "guruplug:red:health"; + gpios = <&gpio1 14 1>; + }; + health-g { + label = "guruplug:green:health"; + gpios = <&gpio1 15 1>; + }; + wmode-r { + label = "guruplug:red:wmode"; + gpios = <&gpio1 16 1>; + }; + wmode-g { + label = "guruplug:green:wmode"; + gpios = <&gpio1 17 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 71902da33d63..5335b1aa8601 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -51,7 +51,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 504f16be8b54..12ccf74ac3c4 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -78,7 +78,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 6cae4599c4b3..93c3afbef9ee 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -115,7 +115,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 8db3123ac80f..5bbd0542cdd3 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -34,7 +34,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts index 9510c9ea666c..9f55d95f35f5 100644 --- a/arch/arm/boot/dts/kirkwood-lschlv2.dts +++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts @@ -13,7 +13,6 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <166666667>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts index 739019c4cba9..5c84c118ed8d 100644 --- a/arch/arm/boot/dts/kirkwood-lsxhl.dts +++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts @@ -13,7 +13,6 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 262c65403760..758824118a9a 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -20,12 +20,11 @@ pinctrl: pinctrl@10000 { pinctrl-0 = < &pmx_nand &pmx_uart0 - &pmx_led_health &pmx_sdio + &pmx_led_health &pmx_sata0 &pmx_sata1 &pmx_led_user1o &pmx_led_user1g &pmx_led_user0o &pmx_led_user0g &pmx_led_misc - &pmx_sdio_cd >; pinctrl-names = "default"; @@ -91,7 +90,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; @@ -133,6 +131,14 @@ status = "okay"; }; + + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>; + pinctrl-names = "default"; + status = "okay"; + cd-gpios = <&gpio1 15 0>; + /* No WP GPIO */ + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 77d21abfcdf7..6affd924fe11 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -23,7 +23,6 @@ }; serial@12000 { - clock-frequency = <166666667>; status = "okay"; }; @@ -76,4 +75,10 @@ gpios = <&gpio0 12 0>; }; }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 31 0>; + }; + }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 5509f9659546..a7412b937a8a 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -16,9 +16,107 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-0 = < &pmx_led_esata_green + &pmx_led_esata_red + &pmx_led_usb_green + &pmx_led_usb_red + &pmx_usb_power_off + &pmx_led_sys_green + &pmx_led_sys_red + &pmx_btn_reset + &pmx_btn_copy + &pmx_led_copy_green + &pmx_led_copy_red + &pmx_led_hdd_green + &pmx_led_hdd_red + &pmx_unknown + &pmx_btn_power + &pmx_pwr_off >; + pinctrl-names = "default"; + + pmx_led_esata_green: pmx-led-esata-green { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_led_esata_red: pmx-led-esata-red { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_led_usb_green: pmx-led-usb-green { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_led_usb_red: pmx-led-usb-red { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_usb_power_off: pmx-usb-power-off { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_led_sys_green: pmx-led-sys-green { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_led_sys_red: pmx-led-sys-red { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_btn_reset: pmx-btn-reset { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + + pmx_btn_copy: pmx-btn-copy { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + + pmx_led_copy_green: pmx-led-copy-green { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + pmx_led_copy_red: pmx-led-copy-red { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + pmx_led_hdd_green: pmx-led-hdd-green { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_hdd_red: pmx-led-hdd-red { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + pmx_unknown: pmx-unknown { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_btn_power: pmx-btn-power { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_pwr_off: pmx-pwr-off { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; @@ -29,6 +127,11 @@ i2c@11000 { status = "okay"; + + adt7476: adt7476a@2e { + compatible = "adt7476"; + reg = <0x2e>; + }; }; nand@3000000 { @@ -141,4 +244,26 @@ gpios = <&gpio1 8 0>; }; }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 16 0>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb0_power_off: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power Off"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 21 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index 49d3d74d4d38..d27f7245f8e7 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -18,12 +18,10 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; serial@12100 { - clock-frequency = <200000000>; status = "ok"; }; @@ -75,6 +73,122 @@ reg = <0x30>; }; }; + + pinctrl: pinctrl@10000 { + pinctrl-0 = < &pmx_nand &pmx_uart0 + &pmx_uart1 &pmx_twsi1 + &pmx_dip_sw0 &pmx_dip_sw1 + &pmx_dip_sw2 &pmx_dip_sw3 + &pmx_gpio_0 &pmx_gpio_1 + &pmx_gpio_2 &pmx_gpio_3 + &pmx_gpio_4 &pmx_gpio_5 + &pmx_gpio_6 &pmx_gpio_7 + &pmx_led_red &pmx_led_green + &pmx_led_yellow >; + pinctrl-names = "default"; + + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11", "mpp15", + "mpp16"; + marvell,function = "uart0"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14", "mpp8", + "mpp9"; + marvell,function = "uart1"; + }; + + pmx_sysrst: pmx-sysrst { + marvell,pins = "mpp6"; + marvell,function = "sysrst"; + }; + + pmx_dip_sw0: pmx-dip-sw0 { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + + pmx_dip_sw1: pmx-dip-sw1 { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_dip_sw2: pmx-dip-sw2 { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + + pmx_dip_sw3: pmx-dip-sw3 { + marvell,pins = "mpp23"; + marvell,function = "gpio"; + }; + + pmx_gpio_0: pmx-gpio-0 { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + pmx_gpio_1: pmx-gpio-1 { + marvell,pins = "mpp25"; + marvell,function = "gpio"; + }; + + pmx_gpio_2: pmx-gpio-2 { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; + + pmx_gpio_3: pmx-gpio-3 { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + + pmx_gpio_4: pmx-gpio-4 { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_gpio_5: pmx-gpio-5 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_gpio_6: pmx-gpio-6 { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; + + pmx_gpio_7: pmx-gpio-7 { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + + pmx_gpio_init: pmx-init { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + + pmx_usb_oc: pmx-usb-oc { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + pmx_led_red: pmx-led-red { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_green: pmx-led-green { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + pmx_led_yellow: pmx-led-yellow { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index cd15452a52a6..66eb45b00b25 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6282.dtsi" / { model = "Univeral Scientific Industrial Co. Topkick-1281P2"; @@ -16,8 +17,97 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + /* + * GPIO LED layout + * + * /-SYS_LED(2) + * | + * | /-DISK_LED + * | | + * | | /-WLAN_LED(2) + * | | | + * [SW] [*] [*] [*] + */ + + /* + * Switch positions + * + * /-SW_LEFT(2) + * | + * | /-SW_IDLE + * | | + * | | /-SW_RIGHT + * | | | + * PS [L] [I] [R] LEDS + */ + pinctrl-0 = < &pmx_led_disk_yellow + &pmx_sata0_pwr_enable + &pmx_led_sys_red + &pmx_led_sys_blue + &pmx_led_wifi_green + &pmx_sw_left + &pmx_sw_right + &pmx_sw_idle + &pmx_sw_left2 + &pmx_led_wifi_yellow + &pmx_uart0 + &pmx_nand + &pmx_twsi0 >; + pinctrl-names = "default"; + + pmx_led_disk_yellow: pmx-led-disk-yellow { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_sata0_pwr_enable: pmx-sata0-pwr-enable { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + + pmx_led_sys_red: pmx-led-sys-red { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + + pmx_led_sys_blue: pmx-led-sys-blue { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + + pmx_led_wifi_green: pmx-led-wifi-green { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + pmx_sw_left: pmx-sw-left { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + pmx_sw_right: pmx-sw-right { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_sw_idle: pmx-sw-idle { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_sw_left2: pmx-sw-left2 { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_led_wifi_yellow: pmx-led-wifi-yellow { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + }; + serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; @@ -54,6 +144,17 @@ status = "okay"; nr-ports = <1>; }; + + i2c@11000 { + status = "ok"; + }; + + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index d6ab442b7011..fada7e6d24d8 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -38,6 +38,7 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <35>, <36>, <37>, <38>; + clocks = <&gate_clk 7>; }; gpio1: gpio@10140 { @@ -49,6 +50,7 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <39>, <40>, <41>; + clocks = <&gate_clk 7>; }; serial@12000 { @@ -57,7 +59,6 @@ reg-shift = <2>; interrupts = <33>; clocks = <&gate_clk 7>; - /* set clock-frequency in board dts */ status = "disabled"; }; @@ -67,7 +68,6 @@ reg-shift = <2>; interrupts = <34>; clocks = <&gate_clk 7>; - /* set clock-frequency in board dts */ status = "disabled"; }; @@ -75,6 +75,7 @@ compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; + clocks = <&gate_clk 7>; }; spi@10600 { @@ -193,5 +194,13 @@ clocks = <&gate_clk 17>; status = "okay"; }; + + mvsdio@90000 { + compatible = "marvell,orion-sdio"; + reg = <0x90000 0x200>; + interrupts = <28>; + clocks = <&gate_clk 4>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts index c9b4f27d191e..7f70a39459f6 100644 --- a/arch/arm/boot/dts/mmp2-brownstone.dts +++ b/arch/arm/boot/dts/mmp2-brownstone.dts @@ -29,6 +29,164 @@ }; twsi1: i2c@d4011000 { status = "okay"; + pmic: max8925@3c { + compatible = "maxium,max8925"; + reg = <0x3c>; + interrupts = <1>; + interrupt-parent = <&intcmux4>; + interrupt-controller; + #interrupt-cells = <1>; + maxim,tsc-irq = <0>; + + regulators { + SDV1 { + regulator-min-microvolt = <637500>; + regulator-max-microvolt = <1425000>; + regulator-boot-on; + regulator-always-on; + }; + SDV2 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2225000>; + regulator-boot-on; + regulator-always-on; + }; + SDV3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO1 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO2 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO3 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO4 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO5 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO6 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO7 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO8 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO9 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO10 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + }; + LDO11 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO12 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO13 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO14 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO15 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO16 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO17 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO18 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO19 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO20 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + }; + backlight { + maxim,max8925-dual-string = <0>; + }; + charger { + batt-detect = <0>; + topoff-threshold = <1>; + fast-charge = <7>; + no-temp-support = <0>; + no-insert-detect = <0>; + }; + }; }; rtc: rtc@d4010000 { status = "okay"; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 0514fb41627e..1429ac05b36d 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -46,7 +46,7 @@ mrvl,intc-nr-irqs = <64>; }; - intcmux4@d4282150 { + intcmux4: interrupt-controller@d4282150 { compatible = "mrvl,mmp2-mux-intc"; interrupts = <4>; interrupt-controller; @@ -201,6 +201,8 @@ compatible = "mrvl,mmp-twsi"; reg = <0xd4011000 0x1000>; interrupts = <7>; + #address-cells = <1>; + #size-cells = <0>; mrvl,i2c-fast-mode; status = "disabled"; }; diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index 5a3a58b7e18f..0077fc8510b7 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -11,7 +11,7 @@ / { model = "LaCie Ethernet Disk mini V2"; - compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x"; + compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { reg = <0x00000000 0x4000000>; /* 64 MB */ diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 936d2306e7e1..7e8769bd5977 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -75,6 +75,9 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0xffe01000 0x1000>; interrupts = <0 180 4>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 9a428931d042..48d00a099ce3 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -118,6 +118,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; interrupts = <1 13 0x304>; + clocks = <&tegra_car 132>; }; intc: interrupt-controller { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 767803e1fd55..9d87a3ffe998 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -119,6 +119,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; interrupts = <1 13 0xf04>; + clocks = <&tegra_car 214>; }; intc: interrupt-controller { diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 0b7ee92c5713..3fe8dae8d32d 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -1,26 +1,24 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_DOVE=y CONFIG_MACH_DOVE_DB=y CONFIG_MACH_CM_A510=y CONFIG_MACH_DOVE_DT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_AEABI=y +CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_HIGHMEM=y -CONFIG_USE_OF=y -CONFIG_ATAGS=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y CONFIG_VFP=y CONFIG_NET=y CONFIG_PACKET=y @@ -32,8 +30,9 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -57,7 +56,6 @@ CONFIG_ATA=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_MV643XX_ETH=y -# CONFIG_NETDEV_10000 is not set CONFIG_INPUT_POLLDEV=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y @@ -68,10 +66,7 @@ CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y @@ -81,13 +76,11 @@ CONFIG_SPI=y CONFIG_SPI_ORION=y # CONFIG_HWMON is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_IO_ACCESSORS=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_DOVE=y CONFIG_NEW_LEDS=y @@ -104,6 +97,7 @@ CONFIG_MV_XOR=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -112,24 +106,20 @@ CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_UTF8=y +CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m @@ -138,7 +128,6 @@ CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_TWOFISH=y @@ -147,5 +136,4 @@ CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_MV_CESA=y CONFIG_CRC_CCITT=y -CONFIG_CRC16=y CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index cbd91bce1ca9..2ec8119cff73 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -14,16 +14,20 @@ CONFIG_MACH_ARMADA_XP=y # CONFIG_CACHE_L2X0 is not set # CONFIG_SWP_EMULATE is not set CONFIG_SMP=y -# CONFIG_LOCAL_TIMERS is not set CONFIG_AEABI=y CONFIG_HIGHMEM=y # CONFIG_COMPACTION is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_VFP=y CONFIG_NET=y CONFIG_INET=y +CONFIG_BT=y +CONFIG_BT_MRVL=y +CONFIG_BT_MRVL_SDIO=y +CONFIG_CFG80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_SD=y CONFIG_ATA=y @@ -31,16 +35,34 @@ CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_MVNETA=y CONFIG_MARVELL_PHY=y +CONFIG_MWIFIEX=y +CONFIG_MWIFIEX_SDIO=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_I2C=y +CONFIG_SPI=y +CONFIG_SPI_ORION=y CONFIG_I2C_MV64XXX=y +CONFIG_MTD=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_M25P80=y CONFIG_SERIAL_8250_DW=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y -# CONFIG_USB_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_MMC=y +CONFIG_MMC_MVSDIO=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_S35390A=y +CONFIG_RTC_DRV_MV=y CONFIG_DMADEVICES=y CONFIG_MV_XOR=y # CONFIG_IOMMU_SUPPORT is not set diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index fbbc5bb022d5..6a99e30f81d2 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -116,6 +116,7 @@ CONFIG_SND_SOC=y CONFIG_SND_MXS_SOC=y CONFIG_SND_SOC_MXS_SGTL5000=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index b16bae2c9a60..bd07864f14a0 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -126,6 +126,8 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_TWL4030_PWRBUTTON=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h index ab98fdd083bd..720799fd3a81 100644 --- a/arch/arm/include/asm/delay.h +++ b/arch/arm/include/asm/delay.h @@ -24,6 +24,7 @@ extern struct arm_delay_ops { void (*delay)(unsigned long); void (*const_udelay)(unsigned long); void (*udelay)(unsigned long); + bool const_clock; } arm_delay_ops; #define __delay(n) arm_delay_ops.delay(n) diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h index b69c0d3285f8..dc662fca9230 100644 --- a/arch/arm/include/asm/device.h +++ b/arch/arm/include/asm/device.h @@ -27,4 +27,10 @@ struct pdev_archdata { #endif }; +#ifdef CONFIG_ARM_DMA_USE_IOMMU +#define to_dma_iommu_mapping(dev) ((dev)->archdata.mapping) +#else +#define to_dma_iommu_mapping(dev) NULL +#endif + #endif diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h index 799b09409fad..a8c56acc8c98 100644 --- a/arch/arm/include/asm/dma-iommu.h +++ b/arch/arm/include/asm/dma-iommu.h @@ -7,6 +7,7 @@ #include <linux/scatterlist.h> #include <linux/dma-debug.h> #include <linux/kmemcheck.h> +#include <linux/kref.h> struct dma_iommu_mapping { /* iommu specific data */ @@ -29,6 +30,7 @@ void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping); int arm_iommu_attach_device(struct device *dev, struct dma_iommu_mapping *mapping); +void arm_iommu_detach_device(struct device *dev); #endif /* __KERNEL__ */ #endif diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h deleted file mode 100644 index 4eea2107214b..000000000000 --- a/arch/arm/include/asm/hardware/pl080.h +++ /dev/null @@ -1,146 +0,0 @@ -/* arch/arm/include/asm/hardware/pl080.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * ARM PrimeCell PL080 DMA controller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Note, there are some Samsung updates to this controller block which - * make it not entierly compatible with the PL080 specification from - * ARM. When in doubt, check the Samsung documentation first. - * - * The Samsung defines are PL080S, and add an extra control register, - * the ability to move more than 2^11 counts of data and some extra - * OneNAND features. -*/ - -#ifndef ASM_PL080_H -#define ASM_PL080_H - -#define PL080_INT_STATUS (0x00) -#define PL080_TC_STATUS (0x04) -#define PL080_TC_CLEAR (0x08) -#define PL080_ERR_STATUS (0x0C) -#define PL080_ERR_CLEAR (0x10) -#define PL080_RAW_TC_STATUS (0x14) -#define PL080_RAW_ERR_STATUS (0x18) -#define PL080_EN_CHAN (0x1c) -#define PL080_SOFT_BREQ (0x20) -#define PL080_SOFT_SREQ (0x24) -#define PL080_SOFT_LBREQ (0x28) -#define PL080_SOFT_LSREQ (0x2C) - -#define PL080_CONFIG (0x30) -#define PL080_CONFIG_M2_BE (1 << 2) -#define PL080_CONFIG_M1_BE (1 << 1) -#define PL080_CONFIG_ENABLE (1 << 0) - -#define PL080_SYNC (0x34) - -/* Per channel configuration registers */ - -#define PL080_Cx_STRIDE (0x20) -#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20))) -#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20))) -#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20))) -#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20))) -#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20))) -#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20))) -#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20))) -#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20))) - -#define PL080_CH_SRC_ADDR (0x00) -#define PL080_CH_DST_ADDR (0x04) -#define PL080_CH_LLI (0x08) -#define PL080_CH_CONTROL (0x0C) -#define PL080_CH_CONFIG (0x10) -#define PL080S_CH_CONTROL2 (0x10) -#define PL080S_CH_CONFIG (0x14) - -#define PL080_LLI_ADDR_MASK (0x3fffffff << 2) -#define PL080_LLI_ADDR_SHIFT (2) -#define PL080_LLI_LM_AHB2 (1 << 0) - -#define PL080_CONTROL_TC_IRQ_EN (1 << 31) -#define PL080_CONTROL_PROT_MASK (0x7 << 28) -#define PL080_CONTROL_PROT_SHIFT (28) -#define PL080_CONTROL_PROT_CACHE (1 << 30) -#define PL080_CONTROL_PROT_BUFF (1 << 29) -#define PL080_CONTROL_PROT_SYS (1 << 28) -#define PL080_CONTROL_DST_INCR (1 << 27) -#define PL080_CONTROL_SRC_INCR (1 << 26) -#define PL080_CONTROL_DST_AHB2 (1 << 25) -#define PL080_CONTROL_SRC_AHB2 (1 << 24) -#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21) -#define PL080_CONTROL_DWIDTH_SHIFT (21) -#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18) -#define PL080_CONTROL_SWIDTH_SHIFT (18) -#define PL080_CONTROL_DB_SIZE_MASK (0x7 << 15) -#define PL080_CONTROL_DB_SIZE_SHIFT (15) -#define PL080_CONTROL_SB_SIZE_MASK (0x7 << 12) -#define PL080_CONTROL_SB_SIZE_SHIFT (12) -#define PL080_CONTROL_TRANSFER_SIZE_MASK (0xfff << 0) -#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0) - -#define PL080_BSIZE_1 (0x0) -#define PL080_BSIZE_4 (0x1) -#define PL080_BSIZE_8 (0x2) -#define PL080_BSIZE_16 (0x3) -#define PL080_BSIZE_32 (0x4) -#define PL080_BSIZE_64 (0x5) -#define PL080_BSIZE_128 (0x6) -#define PL080_BSIZE_256 (0x7) - -#define PL080_WIDTH_8BIT (0x0) -#define PL080_WIDTH_16BIT (0x1) -#define PL080_WIDTH_32BIT (0x2) - -#define PL080N_CONFIG_ITPROT (1 << 20) -#define PL080N_CONFIG_SECPROT (1 << 19) -#define PL080_CONFIG_HALT (1 << 18) -#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */ -#define PL080_CONFIG_LOCK (1 << 16) -#define PL080_CONFIG_TC_IRQ_MASK (1 << 15) -#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14) -#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11) -#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11) -#define PL080_CONFIG_DST_SEL_MASK (0xf << 6) -#define PL080_CONFIG_DST_SEL_SHIFT (6) -#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1) -#define PL080_CONFIG_SRC_SEL_SHIFT (1) -#define PL080_CONFIG_ENABLE (1 << 0) - -#define PL080_FLOW_MEM2MEM (0x0) -#define PL080_FLOW_MEM2PER (0x1) -#define PL080_FLOW_PER2MEM (0x2) -#define PL080_FLOW_SRC2DST (0x3) -#define PL080_FLOW_SRC2DST_DST (0x4) -#define PL080_FLOW_MEM2PER_PER (0x5) -#define PL080_FLOW_PER2MEM_PER (0x6) -#define PL080_FLOW_SRC2DST_SRC (0x7) - -/* DMA linked list chain structure */ - -struct pl080_lli { - u32 src_addr; - u32 dst_addr; - u32 next_lli; - u32 control0; -}; - -struct pl080s_lli { - u32 src_addr; - u32 dst_addr; - u32 next_lli; - u32 control0; - u32 control1; -}; - -#endif /* ASM_PL080_H */ diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index dfe98866a992..d1736a53b12d 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -26,7 +26,7 @@ #include <asm/kvm_arch_timer.h> #define KVM_MAX_VCPUS CONFIG_KVM_ARM_MAX_VCPUS -#define KVM_MEMORY_SLOTS 32 +#define KVM_USER_MEM_SLOTS 32 #define KVM_PRIVATE_MEM_SLOTS 4 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 #define KVM_HAVE_ONE_REG diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index 9f77e7804f3b..e3d55547e755 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -5,15 +5,15 @@ typedef struct { #ifdef CONFIG_CPU_HAS_ASID - u64 id; + atomic64_t id; #endif - unsigned int vmalloc_seq; + unsigned int vmalloc_seq; } mm_context_t; #ifdef CONFIG_CPU_HAS_ASID #define ASID_BITS 8 #define ASID_MASK ((~0ULL) << ASID_BITS) -#define ASID(mm) ((mm)->context.id & ~ASID_MASK) +#define ASID(mm) ((mm)->context.id.counter & ~ASID_MASK) #else #define ASID(mm) (0) #endif @@ -26,7 +26,7 @@ typedef struct { * modified for 2.6 by Hyok S. Choi <hyok.choi@samsung.com> */ typedef struct { - unsigned long end_brk; + unsigned long end_brk; } mm_context_t; #endif diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index e1f644bc7cc5..863a6611323c 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -25,7 +25,7 @@ void __check_vmalloc_seq(struct mm_struct *mm); #ifdef CONFIG_CPU_HAS_ASID void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk); -#define init_new_context(tsk,mm) ({ mm->context.id = 0; }) +#define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; }) #else /* !CONFIG_CPU_HAS_ASID */ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index f30ac3b55ba9..80d6fc4dbe4a 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -247,7 +247,8 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { - const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER | L_PTE_NONE; + const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER | + L_PTE_NONE | L_PTE_VALID; pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); return pte; } diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 6e924d3a77eb..4db8c8820f0d 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -34,10 +34,13 @@ #define TLB_V6_D_ASID (1 << 17) #define TLB_V6_I_ASID (1 << 18) +#define TLB_V6_BP (1 << 19) + /* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */ -#define TLB_V7_UIS_PAGE (1 << 19) -#define TLB_V7_UIS_FULL (1 << 20) -#define TLB_V7_UIS_ASID (1 << 21) +#define TLB_V7_UIS_PAGE (1 << 20) +#define TLB_V7_UIS_FULL (1 << 21) +#define TLB_V7_UIS_ASID (1 << 22) +#define TLB_V7_UIS_BP (1 << 23) #define TLB_BARRIER (1 << 28) #define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */ @@ -150,7 +153,8 @@ #define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \ TLB_V6_I_FULL | TLB_V6_D_FULL | \ TLB_V6_I_PAGE | TLB_V6_D_PAGE | \ - TLB_V6_I_ASID | TLB_V6_D_ASID) + TLB_V6_I_ASID | TLB_V6_D_ASID | \ + TLB_V6_BP) #ifdef CONFIG_CPU_TLB_V6 # define v6wbi_possible_flags v6wbi_tlb_flags @@ -166,9 +170,11 @@ #endif #define v7wbi_tlb_flags_smp (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \ - TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID) + TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | \ + TLB_V7_UIS_ASID | TLB_V7_UIS_BP) #define v7wbi_tlb_flags_up (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \ - TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID) + TLB_V6_U_FULL | TLB_V6_U_PAGE | \ + TLB_V6_U_ASID | TLB_V6_BP) #ifdef CONFIG_CPU_TLB_V7 @@ -430,6 +436,20 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) } } +static inline void local_flush_bp_all(void) +{ + const int zero = 0; + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_V7_UIS_BP)) + asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero)); + else if (tlb_flag(TLB_V6_BP)) + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero)); + + if (tlb_flag(TLB_BARRIER)) + isb(); +} + /* * flush_pmd_entry * @@ -480,6 +500,7 @@ static inline void clean_pmd_entry(void *pmd) #define flush_tlb_kernel_page local_flush_tlb_kernel_page #define flush_tlb_range local_flush_tlb_range #define flush_tlb_kernel_range local_flush_tlb_kernel_range +#define flush_bp_all local_flush_bp_all #else extern void flush_tlb_all(void); extern void flush_tlb_mm(struct mm_struct *mm); @@ -487,6 +508,7 @@ extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr); extern void flush_tlb_kernel_page(unsigned long kaddr); extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); +extern void flush_bp_all(void); #endif /* diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index 4da7cde70b5d..af33b44990ed 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -404,7 +404,7 @@ #define __NR_setns (__NR_SYSCALL_BASE+375) #define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) #define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) - /* 378 for kcmp */ +#define __NR_kcmp (__NR_SYSCALL_BASE+378) #define __NR_finit_module (__NR_SYSCALL_BASE+379) /* diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 5ce738b43508..923eec7105cf 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -110,7 +110,7 @@ int main(void) BLANK(); #endif #ifdef CONFIG_CPU_HAS_ASID - DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id)); + DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id.counter)); BLANK(); #endif DEFINE(VMA_VM_MM, offsetof(struct vm_area_struct, vm_mm)); diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 0cc57611fc4f..c6ca7e376773 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -387,7 +387,7 @@ /* 375 */ CALL(sys_setns) CALL(sys_process_vm_readv) CALL(sys_process_vm_writev) - CALL(sys_ni_syscall) /* reserved for sys_kcmp */ + CALL(sys_kcmp) CALL(sys_finit_module) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 486a15ae9011..e0eb9a1cae77 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -184,13 +184,22 @@ __create_page_tables: orr r3, r3, #3 @ PGD block type mov r6, #4 @ PTRS_PER_PGD mov r7, #1 << (55 - 32) @ L_PGD_SWAPPER -1: str r3, [r0], #4 @ set bottom PGD entry bits +1: +#ifdef CONFIG_CPU_ENDIAN_BE8 str r7, [r0], #4 @ set top PGD entry bits + str r3, [r0], #4 @ set bottom PGD entry bits +#else + str r3, [r0], #4 @ set bottom PGD entry bits + str r7, [r0], #4 @ set top PGD entry bits +#endif add r3, r3, #0x1000 @ next PMD table subs r6, r6, #1 bne 1b add r4, r4, #0x1000 @ point to the PMD tables +#ifdef CONFIG_CPU_ENDIAN_BE8 + add r4, r4, #4 @ we only write the bottom word +#endif #endif ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags @@ -258,6 +267,11 @@ __create_page_tables: addne r6, r6, #1 << SECTION_SHIFT strne r6, [r3] +#if defined(CONFIG_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8) + sub r4, r4, #4 @ Fixup page table pointer + @ for 64-bit descriptors +#endif + #ifdef CONFIG_DEBUG_LL #if !defined(CONFIG_DEBUG_ICEDCC) && !defined(CONFIG_DEBUG_SEMIHOSTING) /* @@ -276,13 +290,17 @@ __create_page_tables: orr r3, r7, r3, lsl #SECTION_SHIFT #ifdef CONFIG_ARM_LPAE mov r7, #1 << (54 - 32) @ XN +#ifdef CONFIG_CPU_ENDIAN_BE8 + str r7, [r0], #4 + str r3, [r0], #4 #else - orr r3, r3, #PMD_SECT_XN -#endif str r3, [r0], #4 -#ifdef CONFIG_ARM_LPAE str r7, [r0], #4 #endif +#else + orr r3, r3, #PMD_SECT_XN + str r3, [r0], #4 +#endif #else /* CONFIG_DEBUG_ICEDCC || CONFIG_DEBUG_SEMIHOSTING */ /* we don't need any serial debugging mappings */ diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 5eae53e7a2e1..96093b75ab90 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -1023,7 +1023,7 @@ out_mdbgen: static int __cpuinit dbg_reset_notify(struct notifier_block *self, unsigned long action, void *cpu) { - if (action == CPU_ONLINE) + if ((action & ~CPU_TASKS_FROZEN) == CPU_ONLINE) smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1); return NOTIFY_OK; diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 4dd41fc9e235..170e9f34003f 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -395,7 +395,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs) { struct kretprobe_instance *ri = NULL; struct hlist_head *head, empty_rp; - struct hlist_node *node, *tmp; + struct hlist_node *tmp; unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline; @@ -415,7 +415,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs) * real return address, and all the rest will point to * kretprobe_trampoline */ - hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { + hlist_for_each_entry_safe(ri, tmp, head, hlist) { if (ri->task != current) /* another task is sharing our hash bucket */ continue; @@ -442,7 +442,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs) kretprobe_assert(ri, orig_ret_address, trampoline_address); kretprobe_hash_unlock(current, &flags); - hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) { + hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) { hlist_del(&ri->hlist); kfree(ri); } diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 31e0eb353cd8..146157dfe27c 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -400,7 +400,7 @@ __hw_perf_event_init(struct perf_event *event) } if (event->group_leader != event) { - if (validate_group(event) != 0); + if (validate_group(event) != 0) return -EINVAL; } @@ -484,7 +484,7 @@ const struct dev_pm_ops armpmu_dev_pm_ops = { SET_RUNTIME_PM_OPS(armpmu_runtime_suspend, armpmu_runtime_resume, NULL) }; -static void __init armpmu_init(struct arm_pmu *armpmu) +static void armpmu_init(struct arm_pmu *armpmu) { atomic_set(&armpmu->active_events, 0); mutex_init(&armpmu->reserve_mutex); diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 8c79a9e70b83..039cffb053a7 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -774,7 +774,7 @@ static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] /* * PMXEVTYPER: Event selection reg */ -#define ARMV7_EVTYPE_MASK 0xc00000ff /* Mask for writable bits */ +#define ARMV7_EVTYPE_MASK 0xc80000ff /* Mask for writable bits */ #define ARMV7_EVTYPE_EVENT 0xff /* Mask for EVENT bits */ /* diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 5f73f7018f50..31644f1978d5 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -285,6 +285,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void) * switch away from it before attempting any exclusive accesses. */ cpu_switch_mm(mm->pgd, mm); + local_flush_bp_all(); enter_lazy_tlb(mm, current); local_flush_tlb_all(); @@ -466,8 +467,6 @@ void tick_broadcast(const struct cpumask *mask) { smp_cross_call(mask, IPI_TIMER); } -#else -#define smp_timer_broadcast NULL #endif static void broadcast_timer_set_mode(enum clock_event_mode mode, @@ -674,6 +673,9 @@ static int cpufreq_callback(struct notifier_block *nb, if (freq->flags & CPUFREQ_CONST_LOOPS) return NOTIFY_OK; + if (arm_delay_ops.const_clock) + return NOTIFY_OK; + if (!per_cpu(l_p_j_ref, cpu)) { per_cpu(l_p_j_ref, cpu) = per_cpu(cpu_data, cpu).loops_per_jiffy; diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index 02c5d2ce23bf..bd0300531399 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -64,6 +64,11 @@ static inline void ipi_flush_tlb_kernel_range(void *arg) local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end); } +static inline void ipi_flush_bp_all(void *ignored) +{ + local_flush_bp_all(); +} + void flush_tlb_all(void) { if (tlb_ops_need_broadcast()) @@ -127,3 +132,10 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) local_flush_tlb_kernel_range(start, end); } +void flush_bp_all(void) +{ + if (tlb_ops_need_broadcast()) + on_each_cpu(ipi_flush_bp_all, NULL, 1); + else + local_flush_bp_all(); +} diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index c092115d903a..3f2565037480 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -22,6 +22,7 @@ #include <linux/of_irq.h> #include <linux/of_address.h> +#include <asm/smp_plat.h> #include <asm/smp_twd.h> #include <asm/localtimer.h> @@ -373,6 +374,9 @@ void __init twd_local_timer_of_register(void) struct device_node *np; int err; + if (!is_smp() || !setup_max_cpus) + return; + np = of_find_matching_node(NULL, twd_of_match); if (!np) return; diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c index 358bca3a995e..c59c97ea8268 100644 --- a/arch/arm/kernel/suspend.c +++ b/arch/arm/kernel/suspend.c @@ -68,6 +68,7 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) ret = __cpu_suspend(arg, fn); if (ret == 0) { cpu_switch_mm(mm->pgd, mm); + local_flush_bp_all(); local_flush_tlb_all(); } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index b0179b89a04c..1c089119b2d7 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -296,7 +296,7 @@ static void oops_end(unsigned long flags, struct pt_regs *regs, int signr) bust_spinlocks(0); die_owner = -1; - add_taint(TAINT_DIE); + add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE); die_nest_count--; if (!die_nest_count) /* Nest count reaches zero, release the lock. */ diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 9ada5549216d..5a936988eb24 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -232,7 +232,7 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, struct kvm_memory_slot old, struct kvm_userspace_memory_region *mem, - int user_alloc) + bool user_alloc) { return 0; } @@ -240,7 +240,7 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm, void kvm_arch_commit_memory_region(struct kvm *kvm, struct kvm_userspace_memory_region *mem, struct kvm_memory_slot old, - int user_alloc) + bool user_alloc) { } diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index f30e13163a96..99e07c7dd745 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -633,11 +633,6 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) } memslot = gfn_to_memslot(vcpu->kvm, gfn); - if (!memslot->user_alloc) { - kvm_err("non user-alloc memslots not supported\n"); - ret = -EINVAL; - goto out_unlock; - } ret = user_mem_abort(vcpu, fault_ipa, gfn, memslot, fault_status); if (ret == 0) diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 0dc53854a5d8..6b93f6a1a3c7 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -77,6 +77,7 @@ void __init register_current_timer_delay(const struct delay_timer *timer) arm_delay_ops.delay = __timer_delay; arm_delay_ops.const_udelay = __timer_const_udelay; arm_delay_ops.udelay = __timer_udelay; + arm_delay_ops.const_clock = true; delay_calibrated = true; } else { pr_info("Ignoring duplicate/late registration of read_current_timer delay\n"); diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S index 650d5923ab83..d912e7397ecc 100644 --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S @@ -19,9 +19,9 @@ 1: subs r2, r2, #4 @ 1 do we have enough blt 5f @ 1 bytes to align with? cmp r3, #2 @ 1 - strltb r1, [r0], #1 @ 1 - strleb r1, [r0], #1 @ 1 - strb r1, [r0], #1 @ 1 + strltb r1, [ip], #1 @ 1 + strleb r1, [ip], #1 @ 1 + strb r1, [ip], #1 @ 1 add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3)) /* * The pointer is now aligned and the length is adjusted. Try doing the @@ -29,10 +29,14 @@ */ ENTRY(memset) - ands r3, r0, #3 @ 1 unaligned? +/* + * Preserve the contents of r0 for the return value. + */ + mov ip, r0 + ands r3, ip, #3 @ 1 unaligned? bne 1b @ 1 /* - * we know that the pointer in r0 is aligned to a word boundary. + * we know that the pointer in ip is aligned to a word boundary. */ orr r1, r1, r1, lsl #8 orr r1, r1, r1, lsl #16 @@ -43,29 +47,28 @@ ENTRY(memset) #if ! CALGN(1)+0 /* - * We need an extra register for this loop - save the return address and - * use the LR + * We need 2 extra registers for this loop - use r8 and the LR */ - str lr, [sp, #-4]! - mov ip, r1 + stmfd sp!, {r8, lr} + mov r8, r1 mov lr, r1 2: subs r2, r2, #64 - stmgeia r0!, {r1, r3, ip, lr} @ 64 bytes at a time. - stmgeia r0!, {r1, r3, ip, lr} - stmgeia r0!, {r1, r3, ip, lr} - stmgeia r0!, {r1, r3, ip, lr} + stmgeia ip!, {r1, r3, r8, lr} @ 64 bytes at a time. + stmgeia ip!, {r1, r3, r8, lr} + stmgeia ip!, {r1, r3, r8, lr} + stmgeia ip!, {r1, r3, r8, lr} bgt 2b - ldmeqfd sp!, {pc} @ Now <64 bytes to go. + ldmeqfd sp!, {r8, pc} @ Now <64 bytes to go. /* * No need to correct the count; we're only testing bits from now on */ tst r2, #32 - stmneia r0!, {r1, r3, ip, lr} - stmneia r0!, {r1, r3, ip, lr} + stmneia ip!, {r1, r3, r8, lr} + stmneia ip!, {r1, r3, r8, lr} tst r2, #16 - stmneia r0!, {r1, r3, ip, lr} - ldr lr, [sp], #4 + stmneia ip!, {r1, r3, r8, lr} + ldmfd sp!, {r8, lr} #else @@ -74,54 +77,54 @@ ENTRY(memset) * whole cache lines at once. */ - stmfd sp!, {r4-r7, lr} + stmfd sp!, {r4-r8, lr} mov r4, r1 mov r5, r1 mov r6, r1 mov r7, r1 - mov ip, r1 + mov r8, r1 mov lr, r1 cmp r2, #96 - tstgt r0, #31 + tstgt ip, #31 ble 3f - and ip, r0, #31 - rsb ip, ip, #32 - sub r2, r2, ip - movs ip, ip, lsl #(32 - 4) - stmcsia r0!, {r4, r5, r6, r7} - stmmiia r0!, {r4, r5} - tst ip, #(1 << 30) - mov ip, r1 - strne r1, [r0], #4 + and r8, ip, #31 + rsb r8, r8, #32 + sub r2, r2, r8 + movs r8, r8, lsl #(32 - 4) + stmcsia ip!, {r4, r5, r6, r7} + stmmiia ip!, {r4, r5} + tst r8, #(1 << 30) + mov r8, r1 + strne r1, [ip], #4 3: subs r2, r2, #64 - stmgeia r0!, {r1, r3-r7, ip, lr} - stmgeia r0!, {r1, r3-r7, ip, lr} + stmgeia ip!, {r1, r3-r8, lr} + stmgeia ip!, {r1, r3-r8, lr} bgt 3b - ldmeqfd sp!, {r4-r7, pc} + ldmeqfd sp!, {r4-r8, pc} tst r2, #32 - stmneia r0!, {r1, r3-r7, ip, lr} + stmneia ip!, {r1, r3-r8, lr} tst r2, #16 - stmneia r0!, {r4-r7} - ldmfd sp!, {r4-r7, lr} + stmneia ip!, {r4-r7} + ldmfd sp!, {r4-r8, lr} #endif 4: tst r2, #8 - stmneia r0!, {r1, r3} + stmneia ip!, {r1, r3} tst r2, #4 - strne r1, [r0], #4 + strne r1, [ip], #4 /* * When we get here, we've got less than 4 bytes to zero. We * may have an unaligned pointer as well. */ 5: tst r2, #2 - strneb r1, [r0], #1 - strneb r1, [r0], #1 + strneb r1, [ip], #1 + strneb r1, [ip], #1 tst r2, #1 - strneb r1, [r0], #1 + strneb r1, [ip], #1 mov pc, lr ENDPROC(memset) diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 1f50a653eb8c..c2dfe06563df 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -1253,11 +1253,24 @@ static struct vpif_capture_config da850_vpif_capture_config = { }; /* VPIF display configuration */ + +static struct adv7343_platform_data adv7343_pdata = { + .mode_config = { + .dac_3 = 1, + .dac_2 = 1, + .dac_1 = 1, + }, + .sd_config = { + .sd_dac_out1 = 1, + }, +}; + static struct vpif_subdev_info da850_vpif_subdev[] = { { .name = "adv7343", .board_info = { I2C_BOARD_INFO("adv7343", 0x2a), + .platform_data = &adv7343_pdata, }, }, }; diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index e4a16f98e6a2..71735e7797cc 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -690,7 +690,7 @@ static struct vpbe_output dm644xevm_vpbe_outputs[] = { .std = VENC_STD_ALL, .capabilities = V4L2_OUT_CAP_STD, }, - .subdev_name = VPBE_VENC_SUBDEV_NAME, + .subdev_name = DM644X_VPBE_VENC_SUBDEV_NAME, .default_mode = "ntsc", .num_modes = ARRAY_SIZE(dm644xevm_enc_std_timing), .modes = dm644xevm_enc_std_timing, @@ -702,7 +702,7 @@ static struct vpbe_output dm644xevm_vpbe_outputs[] = { .type = V4L2_OUTPUT_TYPE_ANALOG, .capabilities = V4L2_OUT_CAP_DV_TIMINGS, }, - .subdev_name = VPBE_VENC_SUBDEV_NAME, + .subdev_name = DM644X_VPBE_VENC_SUBDEV_NAME, .default_mode = "480p59_94", .num_modes = ARRAY_SIZE(dm644xevm_enc_preset_timing), .modes = dm644xevm_enc_preset_timing, @@ -713,10 +713,10 @@ static struct vpbe_config dm644xevm_display_cfg = { .module_name = "dm644x-vpbe-display", .i2c_adapter_id = 1, .osd = { - .module_name = VPBE_OSD_SUBDEV_NAME, + .module_name = DM644X_VPBE_OSD_SUBDEV_NAME, }, .venc = { - .module_name = VPBE_VENC_SUBDEV_NAME, + .module_name = DM644X_VPBE_VENC_SUBDEV_NAME, }, .num_outputs = ARRAY_SIZE(dm644xevm_vpbe_outputs), .outputs = dm644xevm_vpbe_outputs, diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 11c79a3362ef..db1dd92e00af 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -669,19 +669,14 @@ static struct resource dm644x_osd_resources[] = { }, }; -static struct osd_platform_data dm644x_osd_data = { - .vpbe_type = VPBE_VERSION_1, -}; - static struct platform_device dm644x_osd_dev = { - .name = VPBE_OSD_SUBDEV_NAME, + .name = DM644X_VPBE_OSD_SUBDEV_NAME, .id = -1, .num_resources = ARRAY_SIZE(dm644x_osd_resources), .resource = dm644x_osd_resources, .dev = { .dma_mask = &dm644x_video_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dm644x_osd_data, }, }; @@ -751,12 +746,11 @@ static struct platform_device dm644x_vpbe_display = { }; static struct venc_platform_data dm644x_venc_pdata = { - .venc_type = VPBE_VERSION_1, .setup_clock = dm644x_venc_setup_clock, }; static struct platform_device dm644x_venc_dev = { - .name = VPBE_VENC_SUBDEV_NAME, + .name = DM644X_VPBE_VENC_SUBDEV_NAME, .id = -1, .num_resources = ARRAY_SIZE(dm644x_venc_resources), .resource = dm644x_venc_resources, diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index 603c5fd99e8a..36469d813951 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -2,8 +2,12 @@ if ARCH_DOVE menu "Marvell Dove Implementations" +config DOVE_LEGACY + bool + config MACH_DOVE_DB bool "Marvell DB-MV88AP510 Development Board" + select DOVE_LEGACY select I2C_BOARDINFO help Say 'Y' here if you want your kernel to support the @@ -11,6 +15,7 @@ config MACH_DOVE_DB config MACH_CM_A510 bool "CompuLab CM-A510 Board" + select DOVE_LEGACY help Say 'Y' here if you want your kernel to support the CompuLab CM-A510 Board. @@ -19,6 +24,8 @@ config MACH_DOVE_DT bool "Marvell Dove Flattened Device Tree" select MVEBU_CLK_CORE select MVEBU_CLK_GATING + select REGULATOR + select REGULATOR_FIXED_VOLTAGE select USE_OF help Say 'Y' here if you want your kernel to support the diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile index 5e683baf96cf..3f0a858fb597 100644 --- a/arch/arm/mach-dove/Makefile +++ b/arch/arm/mach-dove/Makefile @@ -1,4 +1,6 @@ -obj-y += common.o addr-map.o irq.o mpp.o +obj-y += common.o addr-map.o irq.o +obj-$(CONFIG_DOVE_LEGACY) += mpp.o obj-$(CONFIG_PCI) += pcie.o obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o +obj-$(CONFIG_MACH_DOVE_DT) += board-dt.o obj-$(CONFIG_MACH_CM_A510) += cm-a510.o diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c new file mode 100644 index 000000000000..fbde1dd67113 --- /dev/null +++ b/arch/arm/mach-dove/board-dt.c @@ -0,0 +1,92 @@ +/* + * arch/arm/mach-dove/board-dt.c + * + * Marvell Dove 88AP510 System On Chip FDT Board + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/clk-provider.h> +#include <linux/clk/mvebu.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_data/usb-ehci-orion.h> +#include <asm/hardware/cache-tauros2.h> +#include <asm/mach/arch.h> +#include <mach/pm.h> +#include <plat/common.h> +#include <plat/irq.h> +#include "common.h" + +/* + * There are still devices that doesn't even know about DT, + * get clock gates here and add a clock lookup. + */ +static void __init dove_legacy_clk_init(void) +{ + struct device_node *np = of_find_compatible_node(NULL, NULL, + "marvell,dove-gating-clock"); + struct of_phandle_args clkspec; + + clkspec.np = np; + clkspec.args_count = 1; + + clkspec.args[0] = CLOCK_GATING_BIT_GBE; + orion_clkdev_add(NULL, "mv643xx_eth_port.0", + of_clk_get_from_provider(&clkspec)); + + clkspec.args[0] = CLOCK_GATING_BIT_PCIE0; + orion_clkdev_add("0", "pcie", + of_clk_get_from_provider(&clkspec)); + + clkspec.args[0] = CLOCK_GATING_BIT_PCIE1; + orion_clkdev_add("1", "pcie", + of_clk_get_from_provider(&clkspec)); +} + +static void __init dove_of_clk_init(void) +{ + mvebu_clocks_init(); + dove_legacy_clk_init(); +} + +static struct mv643xx_eth_platform_data dove_dt_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, +}; + +static void __init dove_dt_init(void) +{ + pr_info("Dove 88AP510 SoC\n"); + +#ifdef CONFIG_CACHE_TAUROS2 + tauros2_init(0); +#endif + dove_setup_cpu_mbus(); + + /* Setup root of clk tree */ + dove_of_clk_init(); + + /* Internal devices not ported to DT yet */ + dove_ge00_init(&dove_dt_ge00_data); + dove_pcie_init(1, 1); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char * const dove_dt_board_compat[] = { + "marvell,dove", + NULL +}; + +DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") + .map_io = dove_map_io, + .init_early = dove_init_early, + .init_irq = orion_dt_init_irq, + .init_time = dove_timer_init, + .init_machine = dove_dt_init, + .restart = dove_restart, + .dt_compat = dove_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index ea84c535a110..c6b3b2bb50e7 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -360,88 +360,3 @@ void dove_restart(char mode, const char *cmd) while (1) ; } - -#if defined(CONFIG_MACH_DOVE_DT) -/* - * There are still devices that doesn't even know about DT, - * get clock gates here and add a clock lookup. - */ -static void __init dove_legacy_clk_init(void) -{ - struct device_node *np = of_find_compatible_node(NULL, NULL, - "marvell,dove-gating-clock"); - struct of_phandle_args clkspec; - - clkspec.np = np; - clkspec.args_count = 1; - - clkspec.args[0] = CLOCK_GATING_BIT_USB0; - orion_clkdev_add(NULL, "orion-ehci.0", - of_clk_get_from_provider(&clkspec)); - - clkspec.args[0] = CLOCK_GATING_BIT_USB1; - orion_clkdev_add(NULL, "orion-ehci.1", - of_clk_get_from_provider(&clkspec)); - - clkspec.args[0] = CLOCK_GATING_BIT_GBE; - orion_clkdev_add(NULL, "mv643xx_eth_port.0", - of_clk_get_from_provider(&clkspec)); - - clkspec.args[0] = CLOCK_GATING_BIT_PCIE0; - orion_clkdev_add("0", "pcie", - of_clk_get_from_provider(&clkspec)); - - clkspec.args[0] = CLOCK_GATING_BIT_PCIE1; - orion_clkdev_add("1", "pcie", - of_clk_get_from_provider(&clkspec)); -} - -static void __init dove_of_clk_init(void) -{ - mvebu_clocks_init(); - dove_legacy_clk_init(); -} - -static struct mv643xx_eth_platform_data dove_dt_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, -}; - -static void __init dove_dt_init(void) -{ - pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n", - (dove_tclk + 499999) / 1000000); - -#ifdef CONFIG_CACHE_TAUROS2 - tauros2_init(0); -#endif - dove_setup_cpu_mbus(); - - /* Setup root of clk tree */ - dove_of_clk_init(); - - /* Internal devices not ported to DT yet */ - dove_rtc_init(); - - dove_ge00_init(&dove_dt_ge00_data); - dove_ehci0_init(); - dove_ehci1_init(); - dove_pcie_init(1, 1); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char * const dove_dt_board_compat[] = { - "marvell,dove", - NULL -}; - -DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") - .map_io = dove_map_io, - .init_early = dove_init_early, - .init_irq = orion_dt_init_irq, - .init_time = dove_timer_init, - .init_machine = dove_dt_init, - .restart = dove_restart, - .dt_compat = dove_dt_board_compat, -MACHINE_END -#endif diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 85afb031b676..70f94c87479d 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -105,11 +105,6 @@ config EXYNOS4_SETUP_FIMD0 help Common setup code for FIMD0. -config EXYNOS_DEV_SYSMMU - bool - help - Common setup code for SYSTEM MMU in EXYNOS platforms - config EXYNOS4_DEV_USB_OHCI bool help diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index b189881657ec..435757e57bb4 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -52,7 +52,6 @@ obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o -obj-$(CONFIG_EXYNOS_DEV_SYSMMU) += dev-sysmmu.o obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index bbcb3dea0d40..8a8468d83c8c 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -24,7 +24,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/sysmmu.h> #include "common.h" #include "clock-exynos4.h" @@ -709,53 +708,53 @@ static struct clk exynos4_init_clocks_off[] = { .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 14), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0), + .name = "sysmmu", + .devname = "exynos-sysmmu.0", .enable = exynos4_clk_ip_mfc_ctrl, .ctrlbit = (1 << 1), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(mfc_r, 1), + .name = "sysmmu", + .devname = "exynos-sysmmu.1", .enable = exynos4_clk_ip_mfc_ctrl, .ctrlbit = (1 << 2), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(tv, 2), + .name = "sysmmu", + .devname = "exynos-sysmmu.2", .enable = exynos4_clk_ip_tv_ctrl, .ctrlbit = (1 << 4), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(jpeg, 3), + .name = "sysmmu", + .devname = "exynos-sysmmu.3", .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 11), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(rot, 4), + .name = "sysmmu", + .devname = "exynos-sysmmu.4", .enable = exynos4_clk_ip_image_ctrl, .ctrlbit = (1 << 4), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(fimc0, 5), + .name = "sysmmu", + .devname = "exynos-sysmmu.5", .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 7), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(fimc1, 6), + .name = "sysmmu", + .devname = "exynos-sysmmu.6", .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 8), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(fimc2, 7), + .name = "sysmmu", + .devname = "exynos-sysmmu.7", .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 9), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(fimc3, 8), + .name = "sysmmu", + .devname = "exynos-sysmmu.8", .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 10), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(fimd0, 10), + .name = "sysmmu", + .devname = "exynos-sysmmu.10", .enable = exynos4_clk_ip_lcd0_ctrl, .ctrlbit = (1 << 4), } diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c index fed4c26e9dad..19af9f783c56 100644 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ b/arch/arm/mach-exynos/clock-exynos4210.c @@ -26,7 +26,6 @@ #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/sysmmu.h> #include "common.h" #include "clock-exynos4.h" @@ -129,13 +128,13 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_ip_lcd1_ctrl, .ctrlbit = (1 << 0), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(2d, 14), + .name = "sysmmu", + .devname = "exynos-sysmmu.9", .enable = exynos4_clk_ip_image_ctrl, .ctrlbit = (1 << 3), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(fimd1, 11), + .name = "sysmmu", + .devname = "exynos-sysmmu.11", .enable = exynos4_clk_ip_lcd1_ctrl, .ctrlbit = (1 << 4), }, { diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c index 8fba0b5fb8ab..529476f8ec71 100644 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ b/arch/arm/mach-exynos/clock-exynos4212.c @@ -26,7 +26,6 @@ #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/sysmmu.h> #include "common.h" #include "clock-exynos4.h" @@ -111,21 +110,31 @@ static struct clksrc_clk clksrcs[] = { static struct clk init_clocks_off[] = { { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(2d, 14), + .name = "sysmmu", + .devname = "exynos-sysmmu.9", .enable = exynos4_clk_ip_dmc_ctrl, .ctrlbit = (1 << 24), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(isp, 9), + .name = "sysmmu", + .devname = "exynos-sysmmu.12", .enable = exynos4212_clk_ip_isp0_ctrl, .ctrlbit = (7 << 8), }, { - .name = SYSMMU_CLOCK_NAME2, - .devname = SYSMMU_CLOCK_DEVNAME(isp, 9), + .name = "sysmmu", + .devname = "exynos-sysmmu.13", .enable = exynos4212_clk_ip_isp1_ctrl, .ctrlbit = (1 << 4), }, { + .name = "sysmmu", + .devname = "exynos-sysmmu.14", + .enable = exynos4212_clk_ip_isp0_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = "sysmmu", + .devname = "exynos-sysmmu.15", + .enable = exynos4212_clk_ip_isp0_ctrl, + .ctrlbit = (1 << 12), + }, { .name = "flite", .devname = "exynos-fimc-lite.0", .enable = exynos4212_clk_ip_isp0_ctrl, diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index e9d7b80bae49..b0ea31fc9fb8 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -24,7 +24,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/sysmmu.h> #include "common.h" @@ -859,73 +858,78 @@ static struct clk exynos5_init_clocks_off[] = { .enable = exynos5_clk_ip_gscl_ctrl, .ctrlbit = (1 << 3), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0), + .name = "sysmmu", + .devname = "exynos-sysmmu.1", .enable = &exynos5_clk_ip_mfc_ctrl, .ctrlbit = (1 << 1), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(mfc_r, 1), + .name = "sysmmu", + .devname = "exynos-sysmmu.0", .enable = &exynos5_clk_ip_mfc_ctrl, .ctrlbit = (1 << 2), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(tv, 2), + .name = "sysmmu", + .devname = "exynos-sysmmu.2", .enable = &exynos5_clk_ip_disp1_ctrl, .ctrlbit = (1 << 9) }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(jpeg, 3), + .name = "sysmmu", + .devname = "exynos-sysmmu.3", .enable = &exynos5_clk_ip_gen_ctrl, .ctrlbit = (1 << 7), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(rot, 4), + .name = "sysmmu", + .devname = "exynos-sysmmu.4", .enable = &exynos5_clk_ip_gen_ctrl, .ctrlbit = (1 << 6) }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(gsc0, 5), + .name = "sysmmu", + .devname = "exynos-sysmmu.5", .enable = &exynos5_clk_ip_gscl_ctrl, .ctrlbit = (1 << 7), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(gsc1, 6), + .name = "sysmmu", + .devname = "exynos-sysmmu.6", .enable = &exynos5_clk_ip_gscl_ctrl, .ctrlbit = (1 << 8), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(gsc2, 7), + .name = "sysmmu", + .devname = "exynos-sysmmu.7", .enable = &exynos5_clk_ip_gscl_ctrl, .ctrlbit = (1 << 9), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(gsc3, 8), + .name = "sysmmu", + .devname = "exynos-sysmmu.8", .enable = &exynos5_clk_ip_gscl_ctrl, .ctrlbit = (1 << 10), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(isp, 9), + .name = "sysmmu", + .devname = "exynos-sysmmu.9", .enable = &exynos5_clk_ip_isp0_ctrl, .ctrlbit = (0x3F << 8), }, { - .name = SYSMMU_CLOCK_NAME2, - .devname = SYSMMU_CLOCK_DEVNAME(isp, 9), + .name = "sysmmu", + .devname = "exynos-sysmmu.10", .enable = &exynos5_clk_ip_isp1_ctrl, .ctrlbit = (0xF << 4), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(camif0, 12), + .name = "sysmmu", + .devname = "exynos-sysmmu.11", + .enable = &exynos5_clk_ip_disp1_ctrl, + .ctrlbit = (1 << 8) + }, { + .name = "sysmmu", + .devname = "exynos-sysmmu.12", .enable = &exynos5_clk_ip_gscl_ctrl, .ctrlbit = (1 << 11), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(camif1, 13), + .name = "sysmmu", + .devname = "exynos-sysmmu.13", .enable = &exynos5_clk_ip_gscl_ctrl, .ctrlbit = (1 << 12), }, { - .name = SYSMMU_CLOCK_NAME, - .devname = SYSMMU_CLOCK_DEVNAME(2d, 14), + .name = "sysmmu", + .devname = "exynos-sysmmu.14", .enable = &exynos5_clk_ip_acp_ctrl, .ctrlbit = (1 << 7) } diff --git a/arch/arm/mach-exynos/dev-sysmmu.c b/arch/arm/mach-exynos/dev-sysmmu.c deleted file mode 100644 index c5b1ea301df0..000000000000 --- a/arch/arm/mach-exynos/dev-sysmmu.c +++ /dev/null @@ -1,274 +0,0 @@ -/* linux/arch/arm/mach-exynos/dev-sysmmu.c - * - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - System MMU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> - -#include <plat/cpu.h> - -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/sysmmu.h> - -static u64 exynos_sysmmu_dma_mask = DMA_BIT_MASK(32); - -#define SYSMMU_PLATFORM_DEVICE(ipname, devid) \ -static struct sysmmu_platform_data platdata_##ipname = { \ - .dbgname = #ipname, \ -}; \ -struct platform_device SYSMMU_PLATDEV(ipname) = \ -{ \ - .name = SYSMMU_DEVNAME_BASE, \ - .id = devid, \ - .dev = { \ - .dma_mask = &exynos_sysmmu_dma_mask, \ - .coherent_dma_mask = DMA_BIT_MASK(32), \ - .platform_data = &platdata_##ipname, \ - }, \ -} - -SYSMMU_PLATFORM_DEVICE(mfc_l, 0); -SYSMMU_PLATFORM_DEVICE(mfc_r, 1); -SYSMMU_PLATFORM_DEVICE(tv, 2); -SYSMMU_PLATFORM_DEVICE(jpeg, 3); -SYSMMU_PLATFORM_DEVICE(rot, 4); -SYSMMU_PLATFORM_DEVICE(fimc0, 5); /* fimc* and gsc* exist exclusively */ -SYSMMU_PLATFORM_DEVICE(fimc1, 6); -SYSMMU_PLATFORM_DEVICE(fimc2, 7); -SYSMMU_PLATFORM_DEVICE(fimc3, 8); -SYSMMU_PLATFORM_DEVICE(gsc0, 5); -SYSMMU_PLATFORM_DEVICE(gsc1, 6); -SYSMMU_PLATFORM_DEVICE(gsc2, 7); -SYSMMU_PLATFORM_DEVICE(gsc3, 8); -SYSMMU_PLATFORM_DEVICE(isp, 9); -SYSMMU_PLATFORM_DEVICE(fimd0, 10); -SYSMMU_PLATFORM_DEVICE(fimd1, 11); -SYSMMU_PLATFORM_DEVICE(camif0, 12); -SYSMMU_PLATFORM_DEVICE(camif1, 13); -SYSMMU_PLATFORM_DEVICE(2d, 14); - -#define SYSMMU_RESOURCE_NAME(core, ipname) sysmmures_##core##_##ipname - -#define SYSMMU_RESOURCE(core, ipname) \ - static struct resource SYSMMU_RESOURCE_NAME(core, ipname)[] __initdata = - -#define DEFINE_SYSMMU_RESOURCE(core, mem, irq) \ - DEFINE_RES_MEM_NAMED(core##_PA_SYSMMU_##mem, SZ_4K, #mem), \ - DEFINE_RES_IRQ_NAMED(core##_IRQ_SYSMMU_##irq##_0, #mem) - -#define SYSMMU_RESOURCE_DEFINE(core, ipname, mem, irq) \ - SYSMMU_RESOURCE(core, ipname) { \ - DEFINE_SYSMMU_RESOURCE(core, mem, irq) \ - } - -struct sysmmu_resource_map { - struct platform_device *pdev; - struct resource *res; - u32 rnum; - struct device *pdd; - char *clocknames; -}; - -#define SYSMMU_RESOURCE_MAPPING(core, ipname, resname) { \ - .pdev = &SYSMMU_PLATDEV(ipname), \ - .res = SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \ - .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\ - .clocknames = SYSMMU_CLOCK_NAME, \ -} - -#define SYSMMU_RESOURCE_MAPPING_MC(core, ipname, resname, pdata) { \ - .pdev = &SYSMMU_PLATDEV(ipname), \ - .res = SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \ - .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\ - .clocknames = SYSMMU_CLOCK_NAME "," SYSMMU_CLOCK_NAME2, \ -} - -#ifdef CONFIG_EXYNOS_DEV_PD -#define SYSMMU_RESOURCE_MAPPING_PD(core, ipname, resname, pd) { \ - .pdev = &SYSMMU_PLATDEV(ipname), \ - .res = &SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \ - .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\ - .clocknames = SYSMMU_CLOCK_NAME, \ - .pdd = &exynos##core##_device_pd[pd].dev, \ -} - -#define SYSMMU_RESOURCE_MAPPING_MCPD(core, ipname, resname, pd, pdata) {\ - .pdev = &SYSMMU_PLATDEV(ipname), \ - .res = &SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \ - .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\ - .clocknames = SYSMMU_CLOCK_NAME "," SYSMMU_CLOCK_NAME2, \ - .pdd = &exynos##core##_device_pd[pd].dev, \ -} -#else -#define SYSMMU_RESOURCE_MAPPING_PD(core, ipname, resname, pd) \ - SYSMMU_RESOURCE_MAPPING(core, ipname, resname) -#define SYSMMU_RESOURCE_MAPPING_MCPD(core, ipname, resname, pd, pdata) \ - SYSMMU_RESOURCE_MAPPING_MC(core, ipname, resname, pdata) - -#endif /* CONFIG_EXYNOS_DEV_PD */ - -#ifdef CONFIG_ARCH_EXYNOS4 -SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc0, FIMC0, FIMC0); -SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc1, FIMC1, FIMC1); -SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc2, FIMC2, FIMC2); -SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc3, FIMC3, FIMC3); -SYSMMU_RESOURCE_DEFINE(EXYNOS4, jpeg, JPEG, JPEG); -SYSMMU_RESOURCE_DEFINE(EXYNOS4, 2d, G2D, 2D); -SYSMMU_RESOURCE_DEFINE(EXYNOS4, tv, TV, TV_M0); -SYSMMU_RESOURCE_DEFINE(EXYNOS4, 2d_acp, 2D_ACP, 2D); -SYSMMU_RESOURCE_DEFINE(EXYNOS4, rot, ROTATOR, ROTATOR); -SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimd0, FIMD0, LCD0_M0); -SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimd1, FIMD1, LCD1_M1); -SYSMMU_RESOURCE_DEFINE(EXYNOS4, flite0, FIMC_LITE0, FIMC_LITE0); -SYSMMU_RESOURCE_DEFINE(EXYNOS4, flite1, FIMC_LITE1, FIMC_LITE1); -SYSMMU_RESOURCE_DEFINE(EXYNOS4, mfc_r, MFC_R, MFC_M0); -SYSMMU_RESOURCE_DEFINE(EXYNOS4, mfc_l, MFC_L, MFC_M1); -SYSMMU_RESOURCE(EXYNOS4, isp) { - DEFINE_SYSMMU_RESOURCE(EXYNOS4, FIMC_ISP, FIMC_ISP), - DEFINE_SYSMMU_RESOURCE(EXYNOS4, FIMC_DRC, FIMC_DRC), - DEFINE_SYSMMU_RESOURCE(EXYNOS4, FIMC_FD, FIMC_FD), - DEFINE_SYSMMU_RESOURCE(EXYNOS4, ISPCPU, FIMC_CX), -}; - -static struct sysmmu_resource_map sysmmu_resmap4[] __initdata = { - SYSMMU_RESOURCE_MAPPING_PD(4, fimc0, fimc0, PD_CAM), - SYSMMU_RESOURCE_MAPPING_PD(4, fimc1, fimc1, PD_CAM), - SYSMMU_RESOURCE_MAPPING_PD(4, fimc2, fimc2, PD_CAM), - SYSMMU_RESOURCE_MAPPING_PD(4, fimc3, fimc3, PD_CAM), - SYSMMU_RESOURCE_MAPPING_PD(4, tv, tv, PD_TV), - SYSMMU_RESOURCE_MAPPING_PD(4, mfc_r, mfc_r, PD_MFC), - SYSMMU_RESOURCE_MAPPING_PD(4, mfc_l, mfc_l, PD_MFC), - SYSMMU_RESOURCE_MAPPING_PD(4, rot, rot, PD_LCD0), - SYSMMU_RESOURCE_MAPPING_PD(4, jpeg, jpeg, PD_CAM), - SYSMMU_RESOURCE_MAPPING_PD(4, fimd0, fimd0, PD_LCD0), -}; - -static struct sysmmu_resource_map sysmmu_resmap4210[] __initdata = { - SYSMMU_RESOURCE_MAPPING_PD(4, 2d, 2d, PD_LCD0), - SYSMMU_RESOURCE_MAPPING_PD(4, fimd1, fimd1, PD_LCD1), -}; - -static struct sysmmu_resource_map sysmmu_resmap4212[] __initdata = { - SYSMMU_RESOURCE_MAPPING(4, 2d, 2d_acp), - SYSMMU_RESOURCE_MAPPING_PD(4, camif0, flite0, PD_ISP), - SYSMMU_RESOURCE_MAPPING_PD(4, camif1, flite1, PD_ISP), - SYSMMU_RESOURCE_MAPPING_PD(4, isp, isp, PD_ISP), -}; -#endif /* CONFIG_ARCH_EXYNOS4 */ - -#ifdef CONFIG_ARCH_EXYNOS5 -SYSMMU_RESOURCE_DEFINE(EXYNOS5, jpeg, JPEG, JPEG); -SYSMMU_RESOURCE_DEFINE(EXYNOS5, fimd1, FIMD1, FIMD1); -SYSMMU_RESOURCE_DEFINE(EXYNOS5, 2d, 2D, 2D); -SYSMMU_RESOURCE_DEFINE(EXYNOS5, rot, ROTATOR, ROTATOR); -SYSMMU_RESOURCE_DEFINE(EXYNOS5, tv, TV, TV); -SYSMMU_RESOURCE_DEFINE(EXYNOS5, flite0, LITE0, LITE0); -SYSMMU_RESOURCE_DEFINE(EXYNOS5, flite1, LITE1, LITE1); -SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc0, GSC0, GSC0); -SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc1, GSC1, GSC1); -SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc2, GSC2, GSC2); -SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc3, GSC3, GSC3); -SYSMMU_RESOURCE_DEFINE(EXYNOS5, mfc_r, MFC_R, MFC_R); -SYSMMU_RESOURCE_DEFINE(EXYNOS5, mfc_l, MFC_L, MFC_L); -SYSMMU_RESOURCE(EXYNOS5, isp) { - DEFINE_SYSMMU_RESOURCE(EXYNOS5, ISP, ISP), - DEFINE_SYSMMU_RESOURCE(EXYNOS5, DRC, DRC), - DEFINE_SYSMMU_RESOURCE(EXYNOS5, FD, FD), - DEFINE_SYSMMU_RESOURCE(EXYNOS5, ISPCPU, MCUISP), - DEFINE_SYSMMU_RESOURCE(EXYNOS5, SCALERC, SCALERCISP), - DEFINE_SYSMMU_RESOURCE(EXYNOS5, SCALERP, SCALERPISP), - DEFINE_SYSMMU_RESOURCE(EXYNOS5, ODC, ODC), - DEFINE_SYSMMU_RESOURCE(EXYNOS5, DIS0, DIS0), - DEFINE_SYSMMU_RESOURCE(EXYNOS5, DIS1, DIS1), - DEFINE_SYSMMU_RESOURCE(EXYNOS5, 3DNR, 3DNR), -}; - -static struct sysmmu_resource_map sysmmu_resmap5[] __initdata = { - SYSMMU_RESOURCE_MAPPING(5, jpeg, jpeg), - SYSMMU_RESOURCE_MAPPING(5, fimd1, fimd1), - SYSMMU_RESOURCE_MAPPING(5, 2d, 2d), - SYSMMU_RESOURCE_MAPPING(5, rot, rot), - SYSMMU_RESOURCE_MAPPING_PD(5, tv, tv, PD_DISP1), - SYSMMU_RESOURCE_MAPPING_PD(5, camif0, flite0, PD_GSCL), - SYSMMU_RESOURCE_MAPPING_PD(5, camif1, flite1, PD_GSCL), - SYSMMU_RESOURCE_MAPPING_PD(5, gsc0, gsc0, PD_GSCL), - SYSMMU_RESOURCE_MAPPING_PD(5, gsc1, gsc1, PD_GSCL), - SYSMMU_RESOURCE_MAPPING_PD(5, gsc2, gsc2, PD_GSCL), - SYSMMU_RESOURCE_MAPPING_PD(5, gsc3, gsc3, PD_GSCL), - SYSMMU_RESOURCE_MAPPING_PD(5, mfc_r, mfc_r, PD_MFC), - SYSMMU_RESOURCE_MAPPING_PD(5, mfc_l, mfc_l, PD_MFC), - SYSMMU_RESOURCE_MAPPING_MCPD(5, isp, isp, PD_ISP, mc_platdata), -}; -#endif /* CONFIG_ARCH_EXYNOS5 */ - -static int __init init_sysmmu_platform_device(void) -{ - int i, j; - struct sysmmu_resource_map *resmap[2] = {NULL, NULL}; - int nmap[2] = {0, 0}; - -#ifdef CONFIG_ARCH_EXYNOS5 - if (soc_is_exynos5250()) { - resmap[0] = sysmmu_resmap5; - nmap[0] = ARRAY_SIZE(sysmmu_resmap5); - nmap[1] = 0; - } -#endif - -#ifdef CONFIG_ARCH_EXYNOS4 - if (resmap[0] == NULL) { - resmap[0] = sysmmu_resmap4; - nmap[0] = ARRAY_SIZE(sysmmu_resmap4); - } - - if (soc_is_exynos4210()) { - resmap[1] = sysmmu_resmap4210; - nmap[1] = ARRAY_SIZE(sysmmu_resmap4210); - } - - if (soc_is_exynos4412() || soc_is_exynos4212()) { - resmap[1] = sysmmu_resmap4212; - nmap[1] = ARRAY_SIZE(sysmmu_resmap4212); - } -#endif - - for (j = 0; j < 2; j++) { - for (i = 0; i < nmap[j]; i++) { - struct sysmmu_resource_map *map; - struct sysmmu_platform_data *platdata; - - map = &resmap[j][i]; - - map->pdev->dev.parent = map->pdd; - - platdata = map->pdev->dev.platform_data; - platdata->clockname = map->clocknames; - - if (platform_device_add_resources(map->pdev, map->res, - map->rnum)) { - pr_err("%s: Failed to add device resources for " - "%s.%d\n", __func__, - map->pdev->name, map->pdev->id); - continue; - } - - if (platform_device_register(map->pdev)) { - pr_err("%s: Failed to register %s.%d\n", - __func__, map->pdev->name, - map->pdev->id); - } - } - } - - return 0; -} -arch_initcall(init_sysmmu_platform_device); diff --git a/arch/arm/mach-exynos/include/mach/sysmmu.h b/arch/arm/mach-exynos/include/mach/sysmmu.h deleted file mode 100644 index 88a4543b0001..000000000000 --- a/arch/arm/mach-exynos/include/mach/sysmmu.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - System MMU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _ARM_MACH_EXYNOS_SYSMMU_H_ -#define _ARM_MACH_EXYNOS_SYSMMU_H_ - -struct sysmmu_platform_data { - char *dbgname; - /* comma(,) separated list of clock names for clock gating */ - char *clockname; -}; - -#define SYSMMU_DEVNAME_BASE "exynos-sysmmu" - -#define SYSMMU_CLOCK_NAME "sysmmu" -#define SYSMMU_CLOCK_NAME2 "sysmmu_mc" - -#ifdef CONFIG_EXYNOS_DEV_SYSMMU -#include <linux/device.h> -struct platform_device; - -#define SYSMMU_PLATDEV(ipname) exynos_device_sysmmu_##ipname - -extern struct platform_device SYSMMU_PLATDEV(mfc_l); -extern struct platform_device SYSMMU_PLATDEV(mfc_r); -extern struct platform_device SYSMMU_PLATDEV(tv); -extern struct platform_device SYSMMU_PLATDEV(jpeg); -extern struct platform_device SYSMMU_PLATDEV(rot); -extern struct platform_device SYSMMU_PLATDEV(fimc0); -extern struct platform_device SYSMMU_PLATDEV(fimc1); -extern struct platform_device SYSMMU_PLATDEV(fimc2); -extern struct platform_device SYSMMU_PLATDEV(fimc3); -extern struct platform_device SYSMMU_PLATDEV(gsc0); -extern struct platform_device SYSMMU_PLATDEV(gsc1); -extern struct platform_device SYSMMU_PLATDEV(gsc2); -extern struct platform_device SYSMMU_PLATDEV(gsc3); -extern struct platform_device SYSMMU_PLATDEV(isp); -extern struct platform_device SYSMMU_PLATDEV(fimd0); -extern struct platform_device SYSMMU_PLATDEV(fimd1); -extern struct platform_device SYSMMU_PLATDEV(camif0); -extern struct platform_device SYSMMU_PLATDEV(camif1); -extern struct platform_device SYSMMU_PLATDEV(2d); - -#ifdef CONFIG_IOMMU_API -static inline void platform_set_sysmmu( - struct device *sysmmu, struct device *dev) -{ - dev->archdata.iommu = sysmmu; -} -#endif - -#else /* !CONFIG_EXYNOS_DEV_SYSMMU */ -#define platform_set_sysmmu(sysmmu, dev) do { } while (0) -#endif - -#define SYSMMU_CLOCK_DEVNAME(ipname, id) (SYSMMU_DEVNAME_BASE "." #id) - -#endif /* _ARM_MACH_EXYNOS_SYSMMU_H_ */ diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index 112d10e53d20..3358088c822a 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -79,6 +79,40 @@ static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_MDMA1, "dma-pl330.2", NULL), OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU, "exynos-tmu", NULL), + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13620000, + "exynos-sysmmu.0", NULL), /* MFC_L */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13630000, + "exynos-sysmmu.1", NULL), /* MFC_R */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E20000, + "exynos-sysmmu.2", NULL), /* TV */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A60000, + "exynos-sysmmu.3", NULL), /* JPEG */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A30000, + "exynos-sysmmu.4", NULL), /* ROTATOR */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A20000, + "exynos-sysmmu.5", NULL), /* FIMC0 */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A30000, + "exynos-sysmmu.6", NULL), /* FIMC1 */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A40000, + "exynos-sysmmu.7", NULL), /* FIMC2 */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A50000, + "exynos-sysmmu.8", NULL), /* FIMC3 */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A20000, + "exynos-sysmmu.9", NULL), /* G2D(4210) */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A40000, + "exynos-sysmmu.9", NULL), /* G2D(4x12) */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11E20000, + "exynos-sysmmu.10", NULL), /* FIMD0 */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12220000, + "exynos-sysmmu.11", NULL), /* FIMD1(4210) */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12260000, + "exynos-sysmmu.12", NULL), /* IS0(4x12) */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x122B0000, + "exynos-sysmmu.13", NULL), /* IS1(4x12) */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123B0000, + "exynos-sysmmu.14", NULL), /* FIMC-LITE0(4x12) */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123C0000, + "exynos-sysmmu.15", NULL), /* FIMC-LITE1(4x12) */ {}, }; diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 973a06637572..acaeb14db54b 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -109,6 +109,36 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "samsung-i2s.1", NULL), OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D70000, "samsung-i2s.2", NULL), + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11210000, + "exynos-sysmmu.0", "mfc"), /* MFC_L */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11200000, + "exynos-sysmmu.1", "mfc"), /* MFC_R */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14650000, + "exynos-sysmmu.2", NULL), /* TV */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11F20000, + "exynos-sysmmu.3", "jpeg"), /* JPEG */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11D40000, + "exynos-sysmmu.4", NULL), /* ROTATOR */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E80000, + "exynos-sysmmu.5", "gscl"), /* GSCL0 */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E90000, + "exynos-sysmmu.6", "gscl"), /* GSCL1 */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EA0000, + "exynos-sysmmu.7", "gscl"), /* GSCL2 */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EB0000, + "exynos-sysmmu.8", "gscl"), /* GSCL3 */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13260000, + "exynos-sysmmu.9", NULL), /* FIMC-IS0 */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x132C0000, + "exynos-sysmmu.10", NULL), /* FIMC-IS1 */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14640000, + "exynos-sysmmu.11", NULL), /* FIMD1 */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C40000, + "exynos-sysmmu.12", NULL), /* FIMC-LITE0 */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C50000, + "exynos-sysmmu.13", NULL), /* FIMC-LITE1 */ + OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A60000, + "exynos-sysmmu.14", NULL), /* G2D */ {}, }; diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b8b3fbf0bae7..1ea79730187f 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -1208,25 +1208,25 @@ static struct i2c_board_info m5mols_board_info = { .platform_data = &m5mols_platdata, }; -static struct s5p_fimc_isp_info nuri_camera_sensors[] = { +static struct fimc_source_info nuri_camera_sensors[] = { { .flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_VSYNC_ACTIVE_LOW, - .bus_type = FIMC_ITU_601, + .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, .board_info = &s5k6aa_board_info, .clk_frequency = 24000000UL, .i2c_bus_num = 6, }, { .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, - .bus_type = FIMC_MIPI_CSI2, + .fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2, .board_info = &m5mols_board_info, .clk_frequency = 24000000UL, }, }; static struct s5p_platform_fimc fimc_md_platdata = { - .isp_info = nuri_camera_sensors, + .source_info = nuri_camera_sensors, .num_clients = ARRAY_SIZE(nuri_camera_sensors), }; diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index c9d33a43103e..497fcb793dc1 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -987,12 +987,12 @@ static struct i2c_board_info m5mols_board_info = { .platform_data = &m5mols_platdata, }; -static struct s5p_fimc_isp_info universal_camera_sensors[] = { +static struct fimc_source_info universal_camera_sensors[] = { { .mux_id = 0, .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, - .bus_type = FIMC_ITU_601, + .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, .board_info = &s5k6aa_board_info, .i2c_bus_num = 0, .clk_frequency = 24000000UL, @@ -1000,7 +1000,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = { .mux_id = 0, .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, - .bus_type = FIMC_MIPI_CSI2, + .fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2, .board_info = &m5mols_board_info, .i2c_bus_num = 0, .clk_frequency = 24000000UL, @@ -1008,7 +1008,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = { }; static struct s5p_platform_fimc fimc_md_platdata = { - .isp_info = universal_camera_sensors, + .source_info = universal_camera_sensors, .num_clients = ARRAY_SIZE(universal_camera_sensors), }; diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index fb7cb841b64c..0f39f8c93b94 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -83,6 +83,7 @@ enum imx5_clks { ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate, epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate, can_sel, can1_serial_gate, can1_ipg_gate, + owire_gate, clk_max }; @@ -233,12 +234,13 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[epit1_hf_gate] = imx_clk_gate2("epit1_hf_gate", "per_root", MXC_CCM_CCGR2, 4); clk[epit2_ipg_gate] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6); clk[epit2_hf_gate] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8); + clk[owire_gate] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22); for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) pr_err("i.MX5 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - + clk_register_clkdev(clk[gpt_hf_gate], "per", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_gate], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[uart1_per_gate], "per", "imx21-uart.0"); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 540138c4606c..2f9ff93a4e61 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -164,15 +164,15 @@ enum mx6q_clks { usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg, ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, - sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, - clk_max + sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate, + usbphy2_gate, clk_max }; static struct clk *clk[clk_max]; static struct clk_onecell_data clk_data; static enum mx6q_clks const clks_init_on[] __initconst = { - mmdc_ch0_axi, rom, + mmdc_ch0_axi, rom, pll1_sys, }; static struct clk_div_table clk_enet_ref_table[] = { @@ -218,8 +218,21 @@ int __init mx6q_clocks_init(void) clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3); clk[pll8_mlb] = imx_clk_pllv3(IMX_PLLV3_MLB, "pll8_mlb", "osc", base + 0xd0, 0x0); - clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6); - clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6); + /* + * Bit 20 is the reserved and read-only bit, we do this only for: + * - Do nothing for usbphy clk_enable/disable + * - Keep refcount when do usbphy clk_enable/disable, in that case, + * the clk framework may need to enable/disable usbphy's parent + */ + clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); + clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); + + /* + * usbphy*_gate needs to be on after system boots up, and software + * never needs to control it anymore. + */ + clk[usbphy1_gate] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6); + clk[usbphy2_gate] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6); clk[sata_ref] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5); clk[pcie_ref] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4); @@ -446,6 +459,11 @@ int __init mx6q_clocks_init(void) for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clk[clks_init_on[i]]); + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { + clk_prepare_enable(clk[usbphy1_gate]); + clk_prepare_enable(clk[usbphy2_gate]); + } + /* Set initial power mode */ imx6q_set_lpm(WAIT_CLOCKED); diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 921fc1555854..a58c8b0527cc 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -26,16 +26,16 @@ ENDPROC(v7_secondary_startup) #ifdef CONFIG_PM /* - * The following code is located into the .data section. This is to - * allow phys_l2x0_saved_regs to be accessed with a relative load - * as we are running on physical address here. + * The following code must assume it is running from physical address + * where absolute virtual addresses to the data section have to be + * turned into relative ones. */ - .data - .align #ifdef CONFIG_CACHE_L2X0 .macro pl310_resume - ldr r2, phys_l2x0_saved_regs + adr r0, l2x0_saved_regs_offset + ldr r2, [r0] + add r2, r2, r0 ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0 ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl @@ -43,9 +43,9 @@ ENDPROC(v7_secondary_startup) str r1, [r0, #L2X0_CTRL] @ re-enable L2 .endm - .globl phys_l2x0_saved_regs -phys_l2x0_saved_regs: - .long 0 +l2x0_saved_regs_offset: + .word l2x0_saved_regs - . + #else .macro pl310_resume .endm diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 1786b2d1257e..9ffd103b27e4 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -12,6 +12,7 @@ #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/cpu.h> #include <linux/delay.h> #include <linux/export.h> #include <linux/init.h> @@ -22,6 +23,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <linux/opp.h> #include <linux/phy.h> #include <linux/regmap.h> #include <linux/micrel_phy.h> @@ -200,6 +202,64 @@ static void __init imx6q_init_machine(void) imx6q_1588_init(); } +#define OCOTP_CFG3 0x440 +#define OCOTP_CFG3_SPEED_SHIFT 16 +#define OCOTP_CFG3_SPEED_1P2GHZ 0x3 + +static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev) +{ + struct device_node *np; + void __iomem *base; + u32 val; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp"); + if (!np) { + pr_warn("failed to find ocotp node\n"); + return; + } + + base = of_iomap(np, 0); + if (!base) { + pr_warn("failed to map ocotp\n"); + goto put_node; + } + + val = readl_relaxed(base + OCOTP_CFG3); + val >>= OCOTP_CFG3_SPEED_SHIFT; + if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ) + if (opp_disable(cpu_dev, 1200000000)) + pr_warn("failed to disable 1.2 GHz OPP\n"); + +put_node: + of_node_put(np); +} + +static void __init imx6q_opp_init(struct device *cpu_dev) +{ + struct device_node *np; + + np = of_find_node_by_path("/cpus/cpu@0"); + if (!np) { + pr_warn("failed to find cpu0 node\n"); + return; + } + + cpu_dev->of_node = np; + if (of_init_opp_table(cpu_dev)) { + pr_warn("failed to init OPP table\n"); + goto put_node; + } + + imx6q_opp_check_1p2ghz(cpu_dev); + +put_node: + of_node_put(np); +} + +struct platform_device imx6q_cpufreq_pdev = { + .name = "imx6q-cpufreq", +}; + static void __init imx6q_init_late(void) { /* @@ -208,6 +268,11 @@ static void __init imx6q_init_late(void) */ if (imx6q_revision() > IMX_CHIP_REVISION_1_1) imx6q_cpuidle_init(); + + if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) { + imx6q_opp_init(&imx6q_cpufreq_pdev.dev); + platform_device_register(&imx6q_cpufreq_pdev); + } } static void __init imx6q_map_io(void) diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index ee42d20cba19..5faba7a3c95f 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -22,8 +22,6 @@ #include "common.h" #include "hardware.h" -extern unsigned long phys_l2x0_saved_regs; - static int imx6q_suspend_finish(unsigned long val) { cpu_do_idle(); @@ -57,18 +55,5 @@ static const struct platform_suspend_ops imx6q_pm_ops = { void __init imx6q_pm_init(void) { - /* - * The l2x0 core code provides an infrastucture to save and restore - * l2x0 registers across suspend/resume cycle. But because imx6q - * retains L2 content during suspend and needs to resume L2 before - * MMU is enabled, it can only utilize register saving support and - * have to take care of restoring on its own. So we save physical - * address of the data structure used by l2x0 core to save registers, - * and later restore the necessary ones in imx6q resume entry. - */ -#ifdef CONFIG_CACHE_L2X0 - phys_l2x0_saved_regs = __pa(&l2x0_saved_regs); -#endif - suspend_set_ops(&imx6q_pm_ops); } diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index f91cdff5a3e4..7b6a64bc5f40 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -58,6 +58,13 @@ config ARCH_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Marvell Kirkwood using flattened device tree. +config MACH_GURUPLUG_DT + bool "Marvell GuruPlug Reference Board (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Marvell GuruPlug Reference Board (Flattened Device Tree). + config MACH_DREAMPLUG_DT bool "Marvell DreamPlug (Flattened Device Tree)" select ARCH_KIRKWOOD_DT diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index d6653095a1eb..4cc4bee4d0cf 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o +obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c index 08248e24ffcd..0903242c00dc 100644 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" static struct mv643xx_eth_platform_data dreamplug_ge00_data = { @@ -26,10 +25,6 @@ static struct mv643xx_eth_platform_data dreamplug_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(1), }; -static struct mvsdio_platform_data dreamplug_mvsdio_data = { - /* unfortunately the CD signal has not been connected */ -}; - void __init dreamplug_init(void) { /* @@ -37,5 +32,4 @@ void __init dreamplug_init(void) */ kirkwood_ge00_init(&dreamplug_ge00_data); kirkwood_ge01_init(&dreamplug_ge01_data); - kirkwood_sdio_init(&dreamplug_mvsdio_data); } diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 95cc04d14b65..d367aa6b47bb 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -41,36 +41,38 @@ static void __init kirkwood_legacy_clk_init(void) struct device_node *np = of_find_compatible_node( NULL, NULL, "marvell,kirkwood-gating-clock"); - struct of_phandle_args clkspec; + struct clk *clk; clkspec.np = np; clkspec.args_count = 1; - clkspec.args[0] = CGC_BIT_GE0; - orion_clkdev_add(NULL, "mv643xx_eth_port.0", - of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_PEX0; orion_clkdev_add("0", "pcie", of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_USB0; - orion_clkdev_add(NULL, "orion-ehci.0", - of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_PEX1; orion_clkdev_add("1", "pcie", of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_GE1; - orion_clkdev_add(NULL, "mv643xx_eth_port.1", - of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_SDIO; orion_clkdev_add(NULL, "mvsdio", of_clk_get_from_provider(&clkspec)); + /* + * The ethernet interfaces forget the MAC address assigned by + * u-boot if the clocks are turned off. Until proper DT support + * is available we always enable them for now. + */ + clkspec.args[0] = CGC_BIT_GE0; + clk = of_clk_get_from_provider(&clkspec); + orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk); + clk_prepare_enable(clk); + + clkspec.args[0] = CGC_BIT_GE1; + clk = of_clk_get_from_provider(&clkspec); + orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk); + clk_prepare_enable(clk); } static void __init kirkwood_of_clk_init(void) @@ -107,6 +109,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("globalscale,dreamplug")) dreamplug_init(); + if (of_machine_is_compatible("globalscale,guruplug")) + guruplug_dt_init(); + if (of_machine_is_compatible("dlink,dns-kirkwood")) dnskw_init(); @@ -150,14 +155,12 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("usi,topkick")) usi_topkick_init(); - if (of_machine_is_compatible("zyxel,nsa310")) - nsa310_init(); - of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL); } static const char * const kirkwood_dt_board_compat[] = { "globalscale,dreamplug", + "globalscale,guruplug", "dlink,dns-320", "dlink,dns-325", "iom,iconnect", diff --git a/arch/arm/mach-kirkwood/board-guruplug.c b/arch/arm/mach-kirkwood/board-guruplug.c new file mode 100644 index 000000000000..0a0df4554d8b --- /dev/null +++ b/arch/arm/mach-kirkwood/board-guruplug.c @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-kirkwood/board-guruplug.c + * + * Marvell Guruplug Reference Board Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/platform_data/mmc-mvsdio.h> +#include "common.h" + +static struct mv643xx_eth_platform_data guruplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data guruplug_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mvsdio_platform_data guruplug_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +void __init guruplug_dt_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_ge00_init(&guruplug_ge00_data); + kirkwood_ge01_init(&guruplug_ge01_data); + kirkwood_sdio_init(&guruplug_mvsdio_data); +} diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c index 3264925b8318..7d6dc669e17f 100644 --- a/arch/arm/mach-kirkwood/board-mplcec4.c +++ b/arch/arm/mach-kirkwood/board-mplcec4.c @@ -12,7 +12,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/mv643xx_eth.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" static struct mv643xx_eth_platform_data mplcec4_ge00_data = { @@ -23,11 +22,6 @@ static struct mv643xx_eth_platform_data mplcec4_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(2), }; -static struct mvsdio_platform_data mplcec4_mvsdio_data = { - .gpio_card_detect = 47, /* MPP47 used as SD card detect */ -}; - - void __init mplcec4_init(void) { /* @@ -35,7 +29,6 @@ void __init mplcec4_init(void) */ kirkwood_ge00_init(&mplcec4_ge00_data); kirkwood_ge01_init(&mplcec4_ge01_data); - kirkwood_sdio_init(&mplcec4_mvsdio_data); kirkwood_pcie_init(KW_PCIE0); } diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c index f4632a809f68..f2ea3b7ad726 100644 --- a/arch/arm/mach-kirkwood/board-ns2.c +++ b/arch/arm/mach-kirkwood/board-ns2.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/mv643xx_eth.h> -#include <linux/gpio.h> #include <linux/of.h> #include "common.h" @@ -23,13 +22,6 @@ static struct mv643xx_eth_platform_data ns2_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -#define NS2_GPIO_POWER_OFF 31 - -static void ns2_power_off(void) -{ - gpio_set_value(NS2_GPIO_POWER_OFF, 1); -} - void __init ns2_init(void) { /* @@ -39,10 +31,4 @@ void __init ns2_init(void) of_machine_is_compatible("lacie,netspace_mini_v2")) ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); kirkwood_ge00_init(&ns2_ge00_data); - - if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 && - gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0) - pm_power_off = ns2_power_off; - else - pr_err("ns2: failed to configure power-off GPIO\n"); } diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c index 970174ad4a70..55ade93b93bf 100644 --- a/arch/arm/mach-kirkwood/board-nsa310.c +++ b/arch/arm/mach-kirkwood/board-nsa310.c @@ -10,79 +10,9 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/gpio.h> -#include <linux/i2c.h> #include <mach/kirkwood.h> #include <linux/of.h> #include "common.h" -#include "mpp.h" - -#define NSA310_GPIO_USB_POWER_OFF 21 -#define NSA310_GPIO_POWER_OFF 48 - -static unsigned int nsa310_mpp_config[] __initdata = { - MPP12_GPIO, /* led esata green */ - MPP13_GPIO, /* led esata red */ - MPP15_GPIO, /* led usb green */ - MPP16_GPIO, /* led usb red */ - MPP21_GPIO, /* control usb power off */ - MPP28_GPIO, /* led sys green */ - MPP29_GPIO, /* led sys red */ - MPP36_GPIO, /* key reset */ - MPP37_GPIO, /* key copy */ - MPP39_GPIO, /* led copy green */ - MPP40_GPIO, /* led copy red */ - MPP41_GPIO, /* led hdd green */ - MPP42_GPIO, /* led hdd red */ - MPP44_GPIO, /* ?? */ - MPP46_GPIO, /* key power */ - MPP48_GPIO, /* control power off */ - 0 -}; - -static struct i2c_board_info __initdata nsa310_i2c_info[] = { - { I2C_BOARD_INFO("adt7476", 0x2e) }, -}; - -static void nsa310_power_off(void) -{ - gpio_set_value(NSA310_GPIO_POWER_OFF, 1); -} - -static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags, - const char *label) -{ - int err; - - err = gpio_request_one(gpio, flags, label); - if (err) - pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n", - gpio, label, err); - - return err; -} - -static void __init nsa310_gpio_init(void) -{ - int err; - - err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW, - "Power Off"); - if (!err) - pm_power_off = nsa310_power_off; - - nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW, - "USB Power Off"); -} - -void __init nsa310_init(void) -{ - kirkwood_mpp_conf(nsa310_mpp_config); - - nsa310_gpio_init(); - - i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info)); -} static int __init nsa310_pci_init(void) { diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c index 815fc6451d52..b11d8fdeca93 100644 --- a/arch/arm/mach-kirkwood/board-openblocks_a6.c +++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c @@ -11,60 +11,16 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/mv643xx_eth.h> -#include <linux/clk.h> -#include <linux/clk-private.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data openblocks_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; -static unsigned int openblocks_a6_mpp_config[] __initdata = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP8_UART1_RTS, - MPP9_UART1_CTS, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP13_UART1_TXD, - MPP14_UART1_RXD, - MPP15_UART0_RTS, - MPP16_UART0_CTS, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GPIO, /* DIP SW0 */ - MPP21_GPIO, /* DIP SW1 */ - MPP22_GPIO, /* DIP SW2 */ - MPP23_GPIO, /* DIP SW3 */ - MPP24_GPIO, /* GPIO 0 */ - MPP25_GPIO, /* GPIO 1 */ - MPP26_GPIO, /* GPIO 2 */ - MPP27_GPIO, /* GPIO 3 */ - MPP28_GPIO, /* GPIO 4 */ - MPP29_GPIO, /* GPIO 5 */ - MPP30_GPIO, /* GPIO 6 */ - MPP31_GPIO, /* GPIO 7 */ - MPP36_TW1_SDA, - MPP37_TW1_SCK, - MPP38_GPIO, /* INIT */ - MPP39_GPIO, /* USB OC */ - MPP41_GPIO, /* LED: Red */ - MPP42_GPIO, /* LED: Green */ - MPP43_GPIO, /* LED: Yellow */ - 0, -}; - void __init openblocks_a6_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(openblocks_a6_mpp_config); kirkwood_ge00_init(&openblocks_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c index 23d2dd1b1b1e..1cc04ec33f0b 100644 --- a/arch/arm/mach-kirkwood/board-usi_topkick.c +++ b/arch/arm/mach-kirkwood/board-usi_topkick.c @@ -14,64 +14,16 @@ #include <linux/init.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data topkick_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; -static struct mvsdio_platform_data topkick_mvsdio_data = { - /* unfortunately the CD signal has not been connected */ -}; - -/* - * GPIO LED layout - * - * /-SYS_LED(2) - * | - * | /-DISK_LED - * | | - * | | /-WLAN_LED(2) - * | | | - * [SW] [*] [*] [*] - */ - -/* - * Switch positions - * - * /-SW_LEFT - * | - * | /-SW_IDLE - * | | - * | | /-SW_RIGHT - * | | | - * PS [L] [I] [R] LEDS - */ - -static unsigned int topkick_mpp_config[] __initdata = { - MPP21_GPIO, /* DISK_LED (low active) - yellow */ - MPP36_GPIO, /* SATA0 power enable (high active) */ - MPP37_GPIO, /* SYS_LED2 (low active) - red */ - MPP38_GPIO, /* SYS_LED (low active) - blue */ - MPP39_GPIO, /* WLAN_LED (low active) - green */ - MPP43_GPIO, /* SW_LEFT (low active) */ - MPP44_GPIO, /* SW_RIGHT (low active) */ - MPP45_GPIO, /* SW_IDLE (low active) */ - MPP46_GPIO, /* SW_LEFT (low active) */ - MPP48_GPIO, /* WLAN_LED2 (low active) - yellow */ - 0 -}; - void __init usi_topkick_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(topkick_mpp_config); - - kirkwood_ge00_init(&topkick_ge00_data); - kirkwood_sdio_init(&topkick_mvsdio_data); } diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index e956d0277dd1..5ed70565c843 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -60,6 +60,11 @@ void dreamplug_init(void); #else static inline void dreamplug_init(void) {}; #endif +#ifdef CONFIG_MACH_GURUPLUG_DT +void guruplug_dt_init(void); +#else +static inline void guruplug_dt_init(void) {}; +#endif #ifdef CONFIG_MACH_TS219_DT void qnap_dt_ts219_init(void); #else @@ -130,12 +135,6 @@ void ns2_init(void); static inline void ns2_init(void) {}; #endif -#ifdef CONFIG_MACH_NSA310_DT -void nsa310_init(void); -#else -static inline void nsa310_init(void) {}; -#endif - #ifdef CONFIG_MACH_OPENBLOCKS_A6_DT void openblocks_a6_init(void); #else diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/arch/arm/mach-mvebu/irq-armada-370-xp.c index 8e3fb082c3c6..274ff58271de 100644 --- a/arch/arm/mach-mvebu/irq-armada-370-xp.c +++ b/arch/arm/mach-mvebu/irq-armada-370-xp.c @@ -34,6 +34,7 @@ #define ARMADA_370_XP_INT_CONTROL (0x00) #define ARMADA_370_XP_INT_SET_ENABLE_OFFS (0x30) #define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS (0x34) +#define ARMADA_370_XP_INT_SOURCE_CTL(irq) (0x100 + irq*4) #define ARMADA_370_XP_CPU_INTACK_OFFS (0x44) @@ -41,28 +42,90 @@ #define ARMADA_370_XP_IN_DRBEL_MSK_OFFS (0xc) #define ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS (0x8) +#define ARMADA_370_XP_MAX_PER_CPU_IRQS (28) + #define ACTIVE_DOORBELLS (8) +static DEFINE_RAW_SPINLOCK(irq_controller_lock); + static void __iomem *per_cpu_int_base; static void __iomem *main_int_base; static struct irq_domain *armada_370_xp_mpic_domain; +/* + * In SMP mode: + * For shared global interrupts, mask/unmask global enable bit + * For CPU interrtups, mask/unmask the calling CPU's bit + */ static void armada_370_xp_irq_mask(struct irq_data *d) { +#ifdef CONFIG_SMP + irq_hw_number_t hwirq = irqd_to_hwirq(d); + + if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS) + writel(hwirq, main_int_base + + ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS); + else + writel(hwirq, per_cpu_int_base + + ARMADA_370_XP_INT_SET_MASK_OFFS); +#else writel(irqd_to_hwirq(d), per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS); +#endif } static void armada_370_xp_irq_unmask(struct irq_data *d) { +#ifdef CONFIG_SMP + irq_hw_number_t hwirq = irqd_to_hwirq(d); + + if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS) + writel(hwirq, main_int_base + + ARMADA_370_XP_INT_SET_ENABLE_OFFS); + else + writel(hwirq, per_cpu_int_base + + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); +#else writel(irqd_to_hwirq(d), per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); +#endif } #ifdef CONFIG_SMP static int armada_xp_set_affinity(struct irq_data *d, const struct cpumask *mask_val, bool force) { + unsigned long reg; + unsigned long new_mask = 0; + unsigned long online_mask = 0; + unsigned long count = 0; + irq_hw_number_t hwirq = irqd_to_hwirq(d); + int cpu; + + for_each_cpu(cpu, mask_val) { + new_mask |= 1 << cpu_logical_map(cpu); + count++; + } + + /* + * Forbid mutlicore interrupt affinity + * This is required since the MPIC HW doesn't limit + * several CPUs from acknowledging the same interrupt. + */ + if (count > 1) + return -EINVAL; + + for_each_cpu(cpu, cpu_online_mask) + online_mask |= 1 << cpu_logical_map(cpu); + + raw_spin_lock(&irq_controller_lock); + + reg = readl(main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq)); + reg = (reg & (~online_mask)) | new_mask; + writel(reg, main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq)); + + raw_spin_unlock(&irq_controller_lock); + return 0; } #endif @@ -82,10 +145,17 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h, { armada_370_xp_irq_mask(irq_get_irq_data(virq)); writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS); - - irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip, - handle_level_irq); irq_set_status_flags(virq, IRQ_LEVEL); + + if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) { + irq_set_percpu_devid(virq); + irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip, + handle_percpu_devid_irq); + + } else { + irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip, + handle_level_irq); + } set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); return 0; @@ -155,6 +225,15 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node, #ifdef CONFIG_SMP armada_xp_mpic_smp_cpu_init(); + + /* + * Set the default affinity from all CPUs to the boot cpu. + * This is required since the MPIC doesn't limit several CPUs + * from acknowledging the same interrupt. + */ + cpumask_clear(irq_default_affinity); + cpumask_set_cpu(smp_processor_id(), irq_default_affinity); + #endif return 0; @@ -173,7 +252,7 @@ asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs if (irqnr > 1022) break; - if (irqnr >= 8) { + if (irqnr > 0) { irqnr = irq_find_mapping(armada_370_xp_mpic_domain, irqnr); handle_IRQ(irqnr, regs); diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c index 8fb23af154b3..e26eeba46598 100644 --- a/arch/arm/mach-mxs/icoll.c +++ b/arch/arm/mach-mxs/icoll.c @@ -100,7 +100,7 @@ static struct irq_domain_ops icoll_irq_domain_ops = { .xlate = irq_domain_xlate_onecell, }; -void __init icoll_of_init(struct device_node *np, +static void __init icoll_of_init(struct device_node *np, struct device_node *interrupt_parent) { /* diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 052186713347..3218f1f2c0e0 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -402,17 +402,17 @@ static void __init cfa10049_init(void) { enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); + + mxsfb_pdata.mode_list = cfa10049_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); + mxsfb_pdata.default_bpp = 32; + mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; } static void __init cfa10037_init(void) { enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); - - mxsfb_pdata.mode_list = cfa10049_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; } static void __init apf28_init(void) diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c index a4294aa9f301..e63b7d87acbd 100644 --- a/arch/arm/mach-mxs/mm.c +++ b/arch/arm/mach-mxs/mm.c @@ -18,6 +18,7 @@ #include <mach/mx23.h> #include <mach/mx28.h> +#include <mach/common.h> /* * Define the MX23 memory map. diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c index 54add60f94c9..1dff46703753 100644 --- a/arch/arm/mach-mxs/ocotp.c +++ b/arch/arm/mach-mxs/ocotp.c @@ -19,6 +19,7 @@ #include <asm/processor.h> /* for cpu_relax() */ #include <mach/mxs.h> +#include <mach/common.h> #define OCOTP_WORD_OFFSET 0x20 #define OCOTP_WORD_COUNT 0x20 diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c index 27c2cb7ab813..1504b68f4c66 100644 --- a/arch/arm/mach-netx/generic.c +++ b/arch/arm/mach-netx/generic.c @@ -168,7 +168,7 @@ void __init netx_init_irq(void) { int irq; - vic_init(io_p2v(NETX_PA_VIC), 0, ~0, 0); + vic_init(io_p2v(NETX_PA_VIC), NETX_IRQ_VIC_START, ~0, 0); for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) { irq_set_chip_and_handler(irq, &netx_hif_chip, diff --git a/arch/arm/mach-netx/include/mach/irqs.h b/arch/arm/mach-netx/include/mach/irqs.h index 6ce914d54a30..8f74a844a775 100644 --- a/arch/arm/mach-netx/include/mach/irqs.h +++ b/arch/arm/mach-netx/include/mach/irqs.h @@ -17,42 +17,42 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define NETX_IRQ_VIC_START 0 -#define NETX_IRQ_SOFTINT 0 -#define NETX_IRQ_TIMER0 1 -#define NETX_IRQ_TIMER1 2 -#define NETX_IRQ_TIMER2 3 -#define NETX_IRQ_SYSTIME_NS 4 -#define NETX_IRQ_SYSTIME_S 5 -#define NETX_IRQ_GPIO_15 6 -#define NETX_IRQ_WATCHDOG 7 -#define NETX_IRQ_UART0 8 -#define NETX_IRQ_UART1 9 -#define NETX_IRQ_UART2 10 -#define NETX_IRQ_USB 11 -#define NETX_IRQ_SPI 12 -#define NETX_IRQ_I2C 13 -#define NETX_IRQ_LCD 14 -#define NETX_IRQ_HIF 15 -#define NETX_IRQ_GPIO_0_14 16 -#define NETX_IRQ_XPEC0 17 -#define NETX_IRQ_XPEC1 18 -#define NETX_IRQ_XPEC2 19 -#define NETX_IRQ_XPEC3 20 -#define NETX_IRQ_XPEC(no) (17 + (no)) -#define NETX_IRQ_MSYNC0 21 -#define NETX_IRQ_MSYNC1 22 -#define NETX_IRQ_MSYNC2 23 -#define NETX_IRQ_MSYNC3 24 -#define NETX_IRQ_IRQ_PHY 25 -#define NETX_IRQ_ISO_AREA 26 +#define NETX_IRQ_VIC_START 64 +#define NETX_IRQ_SOFTINT (NETX_IRQ_VIC_START + 0) +#define NETX_IRQ_TIMER0 (NETX_IRQ_VIC_START + 1) +#define NETX_IRQ_TIMER1 (NETX_IRQ_VIC_START + 2) +#define NETX_IRQ_TIMER2 (NETX_IRQ_VIC_START + 3) +#define NETX_IRQ_SYSTIME_NS (NETX_IRQ_VIC_START + 4) +#define NETX_IRQ_SYSTIME_S (NETX_IRQ_VIC_START + 5) +#define NETX_IRQ_GPIO_15 (NETX_IRQ_VIC_START + 6) +#define NETX_IRQ_WATCHDOG (NETX_IRQ_VIC_START + 7) +#define NETX_IRQ_UART0 (NETX_IRQ_VIC_START + 8) +#define NETX_IRQ_UART1 (NETX_IRQ_VIC_START + 9) +#define NETX_IRQ_UART2 (NETX_IRQ_VIC_START + 10) +#define NETX_IRQ_USB (NETX_IRQ_VIC_START + 11) +#define NETX_IRQ_SPI (NETX_IRQ_VIC_START + 12) +#define NETX_IRQ_I2C (NETX_IRQ_VIC_START + 13) +#define NETX_IRQ_LCD (NETX_IRQ_VIC_START + 14) +#define NETX_IRQ_HIF (NETX_IRQ_VIC_START + 15) +#define NETX_IRQ_GPIO_0_14 (NETX_IRQ_VIC_START + 16) +#define NETX_IRQ_XPEC0 (NETX_IRQ_VIC_START + 17) +#define NETX_IRQ_XPEC1 (NETX_IRQ_VIC_START + 18) +#define NETX_IRQ_XPEC2 (NETX_IRQ_VIC_START + 19) +#define NETX_IRQ_XPEC3 (NETX_IRQ_VIC_START + 20) +#define NETX_IRQ_XPEC(no) (NETX_IRQ_VIC_START + 17 + (no)) +#define NETX_IRQ_MSYNC0 (NETX_IRQ_VIC_START + 21) +#define NETX_IRQ_MSYNC1 (NETX_IRQ_VIC_START + 22) +#define NETX_IRQ_MSYNC2 (NETX_IRQ_VIC_START + 23) +#define NETX_IRQ_MSYNC3 (NETX_IRQ_VIC_START + 24) +#define NETX_IRQ_IRQ_PHY (NETX_IRQ_VIC_START + 25) +#define NETX_IRQ_ISO_AREA (NETX_IRQ_VIC_START + 26) /* int 27 is reserved */ /* int 28 is reserved */ -#define NETX_IRQ_TIMER3 29 -#define NETX_IRQ_TIMER4 30 +#define NETX_IRQ_TIMER3 (NETX_IRQ_VIC_START + 29) +#define NETX_IRQ_TIMER4 (NETX_IRQ_VIC_START + 30) /* int 31 is reserved */ -#define NETX_IRQS 32 +#define NETX_IRQS (NETX_IRQ_VIC_START + 32) /* for multiplexed irqs on gpio 0..14 */ #define NETX_IRQ_GPIO(x) (NETX_IRQS + (x)) diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index fb18831e88aa..14f7e9920479 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -31,6 +31,8 @@ #include <plat/i2c.h> +#include <mach/irqs.h> + #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); #else diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 49ac3dfebef9..8111cd9ff3e5 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -311,9 +311,6 @@ config MACH_OMAP_ZOOM2 default y select OMAP_PACKAGE_CBB select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SERIAL_8250 - select SERIAL_8250_CONSOLE - select SERIAL_CORE_CONSOLE config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" @@ -321,9 +318,6 @@ config MACH_OMAP_ZOOM3 default y select OMAP_PACKAGE_CBP select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SERIAL_8250 - select SERIAL_8250_CONSOLE - select SERIAL_CORE_CONSOLE config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index ff528df70119..b068b7fe99ef 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -11,7 +11,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \ omap_device.o sram.o omap-2-3-common = irq.o -hwmod-common = omap_hwmod.o \ +hwmod-common = omap_hwmod.o omap_hwmod_reset.o \ omap_hwmod_common_data.o clock-common = clock.o clock_common_data.o \ clkt_dpll.o clkt_clksel.o @@ -56,6 +56,7 @@ AFLAGS_sram34xx.o :=-Wa,-march=armv7-a # Restart code (OMAP4/5 currently in omap4-common.c) obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o +obj-$(CONFIG_SOC_AM33XX) += am33xx-restart.o obj-$(CONFIG_ARCH_OMAP3) += omap3-restart.o # Pin multiplexing diff --git a/arch/arm/mach-omap2/am33xx-restart.c b/arch/arm/mach-omap2/am33xx-restart.c new file mode 100644 index 000000000000..88e4fa8af031 --- /dev/null +++ b/arch/arm/mach-omap2/am33xx-restart.c @@ -0,0 +1,34 @@ +/* + * am33xx-restart.c - Code common to all AM33xx machines. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> + +#include "common.h" +#include "prm-regbits-33xx.h" +#include "prm33xx.h" + +/** + * am3xx_restart - trigger a software restart of the SoC + * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c + * @cmd: passed from the userspace program rebooting the system (if provided) + * + * Resets the SoC. For @cmd, see the 'reboot' syscall in + * kernel/sys.c. No return value. + */ +void am33xx_restart(char mode, const char *cmd) +{ + /* TODO: Handle mode and cmd if necessary */ + + am33xx_prm_rmw_reg_bits(AM33XX_GLOBAL_WARM_SW_RST_MASK, + AM33XX_GLOBAL_WARM_SW_RST_MASK, + AM33XX_PRM_DEVICE_MOD, + AM33XX_PRM_RSTCTRL_OFFSET); + + /* OCP barrier */ + (void)am33xx_prm_read_reg(AM33XX_PRM_DEVICE_MOD, + AM33XX_PRM_RSTCTRL_OFFSET); +} diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c index a00d39107a21..25b79a297365 100644 --- a/arch/arm/mach-omap2/am35xx-emac.c +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -62,8 +62,7 @@ static int __init omap_davinci_emac_dev_init(struct omap_hwmod *oh, { struct platform_device *pdev; - pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len, - false); + pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len); if (IS_ERR(pdev)) { WARN(1, "Can't build omap_device for %s:%s.\n", oh->class->name, oh->name); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 2590463e4b57..e54a48060198 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -102,6 +102,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, + .init_late = omap3_init_late, .init_time = omap3_sync32k_timer_init, .dt_compat = omap3_boards_compat, .restart = omap3xxx_restart, @@ -119,6 +120,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, + .init_late = omap3_init_late, .init_time = omap3_secure_sync32k_timer_init, .dt_compat = omap3_gp_boards_compat, .restart = omap3xxx_restart, @@ -140,6 +142,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)") .init_machine = omap_generic_init, .init_time = omap3_am33xx_gptimer_timer_init, .dt_compat = am33xx_boards_compat, + .restart = am33xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index c26d441ca4fb..3a077df6b8df 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -40,7 +40,7 @@ #include <sound/tpa6130a2-plat.h> #include <media/radio-si4713.h> #include <media/si4713.h> -#include <linux/leds-lp5523.h> +#include <linux/platform_data/leds-lp55xx.h> #include <linux/platform_data/tsl2563.h> #include <linux/lis3lv02d.h> @@ -160,7 +160,7 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = { #endif #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) -static struct lp5523_led_config rx51_lp5523_led_config[] = { +static struct lp55xx_led_config rx51_lp5523_led_config[] = { { .name = "lp5523:kb1", .chan_nr = 0, @@ -216,10 +216,10 @@ static void rx51_lp5523_enable(bool state) gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state); } -static struct lp5523_platform_data rx51_lp5523_platform_data = { +static struct lp55xx_platform_data rx51_lp5523_platform_data = { .led_config = rx51_lp5523_led_config, .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), - .clock_mode = LP5523_CLOCK_AUTO, + .clock_mode = LP55XX_CLOCK_AUTO, .setup_resources = rx51_lp5523_setup, .release_resources = rx51_lp5523_release, .enable = rx51_lp5523_enable, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f7c4616cbb60..d2ea68ea678a 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/usb/phy.h> #include <linux/usb/musb.h> #include <linux/platform_data/spi-omap2-mcspi.h> @@ -98,6 +99,7 @@ static void __init rx51_init(void) sdrc_params = nokia_get_sdram_timings(); omap_sdrc_init(sdrc_params, sdrc_params); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(&musb_board_data); rx51_peripherals_init(); diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 1c7c834a5b5f..8cef477d6b00 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -49,13 +49,13 @@ static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev) { } -/* - * PWMA/B register offsets (TWL4030_MODULE_PWMA) - */ +/* Register offsets in TWL4030_MODULE_INTBR */ #define TWL_INTBR_PMBR1 0xD #define TWL_INTBR_GPBR1 0xC -#define TWL_LED_PWMON 0x0 -#define TWL_LED_PWMOFF 0x1 + +/* Register offsets in TWL_MODULE_PWM */ +#define TWL_LED_PWMON 0x3 +#define TWL_LED_PWMOFF 0x4 static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) { @@ -93,8 +93,8 @@ static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) } c = ((50 * (100 - level)) / 100) + 1; - twl_i2c_write_u8(TWL4030_MODULE_PWM1, 0x7F, TWL_LED_PWMOFF); - twl_i2c_write_u8(TWL4030_MODULE_PWM1, c, TWL_LED_PWMON); + twl_i2c_write_u8(TWL_MODULE_PWM, 0x7F, TWL_LED_PWMOFF); + twl_i2c_write_u8(TWL_MODULE_PWM, c, TWL_LED_PWMON); #else pr_warn("Backlight not enabled\n"); #endif diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index ea64ad606759..476b82066cb6 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -284,9 +284,10 @@ DEFINE_STRUCT_CLK(dpll_disp_ck, dpll_core_ck_parents, dpll_ddr_ck_ops); * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2 * and ALT_CLK1/2) */ -DEFINE_CLK_DIVIDER(dpll_disp_m2_ck, "dpll_disp_ck", &dpll_disp_ck, 0x0, - AM33XX_CM_DIV_M2_DPLL_DISP, AM33XX_DPLL_CLKOUT_DIV_SHIFT, - AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL); +DEFINE_CLK_DIVIDER(dpll_disp_m2_ck, "dpll_disp_ck", &dpll_disp_ck, + CLK_SET_RATE_PARENT, AM33XX_CM_DIV_M2_DPLL_DISP, + AM33XX_DPLL_CLKOUT_DIV_SHIFT, AM33XX_DPLL_CLKOUT_DIV_WIDTH, + CLK_DIVIDER_ONE_BASED, NULL); /* DPLL_PER */ static struct dpll_data dpll_per_dd = { @@ -723,7 +724,8 @@ static struct clk_hw_omap lcd_gclk_hw = { .clksel_mask = AM33XX_CLKSEL_0_1_MASK, }; -DEFINE_STRUCT_CLK(lcd_gclk, lcd_ck_parents, gpio_fck_ops); +DEFINE_STRUCT_CLK_FLAGS(lcd_gclk, lcd_ck_parents, + gpio_fck_ops, CLK_SET_RATE_PARENT); DEFINE_CLK_FIXED_FACTOR(mmc_clk, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0, 1, 2); diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index 6ef87580c33f..4579c3c5338f 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -426,6 +426,7 @@ static struct clk dpll4_m5x2_ck_3630 = { .parent_names = dpll4_m5x2_ck_parent_names, .num_parents = ARRAY_SIZE(dpll4_m5x2_ck_parent_names), .ops = &dpll4_m5x2_ck_3630_ops, + .flags = CLK_SET_RATE_PARENT, }; static struct clk cam_mclk; @@ -443,7 +444,14 @@ static struct clk_hw_omap cam_mclk_hw = { .clkdm_name = "cam_clkdm", }; -DEFINE_STRUCT_CLK(cam_mclk, cam_mclk_parent_names, aes2_ick_ops); +static struct clk cam_mclk = { + .name = "cam_mclk", + .hw = &cam_mclk_hw.hw, + .parent_names = cam_mclk_parent_names, + .num_parents = ARRAY_SIZE(cam_mclk_parent_names), + .ops = &aes2_ick_ops, + .flags = CLK_SET_RATE_PARENT, +}; static const struct clksel_rate clkout2_src_core_rates[] = { { .div = 1, .val = 0, .flags = RATE_IN_3XXX }, diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index cebe2b31943e..3d58f335f173 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -605,15 +605,26 @@ static const char *dpll_usb_ck_parents[] = { static struct clk dpll_usb_ck; +static const struct clk_ops dpll_usb_ck_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, + .recalc_rate = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .get_parent = &omap2_init_dpll_parent, + .init = &omap2_init_clk_clkdm, +}; + static struct clk_hw_omap dpll_usb_ck_hw = { .hw = { .clk = &dpll_usb_ck, }, .dpll_data = &dpll_usb_dd, + .clkdm_name = "l3_init_clkdm", .ops = &clkhwops_omap3_dpll, }; -DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_usb_ck_parents, dpll_ck_ops); +DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_usb_ck_parents, dpll_usb_ck_ops); static const char *dpll_usb_clkdcoldo_ck_parents[] = { "dpll_usb_ck", diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index b40204837bd7..60ddd8612b4d 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -65,6 +65,17 @@ struct clockdomain; .ops = &_clkops_name, \ }; +#define DEFINE_STRUCT_CLK_FLAGS(_name, _parent_array_name, \ + _clkops_name, _flags) \ + static struct clk _name = { \ + .name = #_name, \ + .hw = &_name##_hw.hw, \ + .parent_names = _parent_array_name, \ + .num_parents = ARRAY_SIZE(_parent_array_name), \ + .ops = &_clkops_name, \ + .flags = _flags, \ + }; + #define DEFINE_STRUCT_CLK_HW_OMAP(_name, _clkdm_name) \ static struct clk_hw_omap _name##_hw = { \ .hw = { \ diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index 058ce3c0873e..325a51576576 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -241,9 +241,6 @@ int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs) { int i = 0; - if (!clkctrl_offs) - return 0; - omap_test_timeout(_is_module_ready(inst, cdoffs, clkctrl_offs), MAX_MODULE_READY_TIME, i); diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h index 5fa0b62e1a79..64f4bafe7bd9 100644 --- a/arch/arm/mach-omap2/cm33xx.h +++ b/arch/arm/mach-omap2/cm33xx.h @@ -17,16 +17,11 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H #define __ARCH_ARM_MACH_OMAP2_CM_33XX_H -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/io.h> - #include "common.h" #include "cm.h" #include "cm-regbits-33xx.h" -#include "cm33xx.h" +#include "iomap.h" /* CM base address */ #define AM33XX_CM_BASE 0x44e00000 @@ -381,6 +376,7 @@ #define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0020) +#ifndef __ASSEMBLER__ extern bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs); extern void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs); extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs); @@ -417,4 +413,5 @@ static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, } #endif +#endif /* ASSEMBLER */ #endif diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index b4350274361b..40f4a03d728f 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -108,7 +108,6 @@ void omap35xx_init_late(void); void omap3630_init_late(void); void am35xx_init_late(void); void ti81xx_init_late(void); -void omap4430_init_late(void); int omap2_common_pm_late_init(void); #if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430) @@ -119,6 +118,14 @@ static inline void omap2xxx_restart(char mode, const char *cmd) } #endif +#ifdef CONFIG_SOC_AM33XX +void am33xx_restart(char mode, const char *cmd); +#else +static inline void am33xx_restart(char mode, const char *cmd) +{ +} +#endif + #ifdef CONFIG_ARCH_OMAP3 void omap3xxx_restart(char mode, const char *cmd); #else diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 142d9c616f1b..1ec7f0597710 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -426,7 +426,7 @@ static void __init omap_init_hdmi_audio(void) return; } - pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0, 0); + pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0); WARN(IS_ERR(pdev), "Can't build omap_device for omap-hdmi-audio-dai.\n"); diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 0a02aab5df67..3aed4b0b9563 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -500,8 +500,9 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (dd->last_rounded_rate == 0) return -EINVAL; - /* No freqsel on OMAP4 and OMAP3630 */ - if (!cpu_is_omap44xx() && !cpu_is_omap3630()) { + /* No freqsel on AM335x, OMAP4 and OMAP3630 */ + if (!soc_is_am33xx() && !cpu_is_omap44xx() && + !cpu_is_omap3630()) { freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); WARN_ON(!freqsel); diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index e4b16c8efe8b..410e1bac7815 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1122,9 +1122,6 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t, /* TODO: remove, see function definition */ gpmc_convert_ps_to_ns(gpmc_t); - /* Now the GPMC is initialised, unreserve the chip-selects */ - gpmc_cs_map = 0; - return 0; } @@ -1383,6 +1380,9 @@ static int gpmc_probe(struct platform_device *pdev) if (IS_ERR_VALUE(gpmc_setup_irq())) dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); + /* Now the GPMC is initialised, unreserve the chip-selects */ + gpmc_cs_map = 0; + rc = gpmc_probe_dt(pdev); if (rc < 0) { clk_disable_unprepare(gpmc_l3_clk); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 45cc7ed4dd58..8a68f1ec66b9 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -399,8 +399,18 @@ void __init omap3xxx_check_revision(void) } break; case 0xb944: - omap_revision = AM335X_REV_ES1_0; - cpu_rev = "1.0"; + switch (rev) { + case 0: + omap_revision = AM335X_REV_ES1_0; + cpu_rev = "1.0"; + break; + case 1: + /* FALLTHROUGH */ + default: + omap_revision = AM335X_REV_ES2_0; + cpu_rev = "2.0"; + break; + } break; case 0xb8f2: switch (rev) { diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 6a217c98db54..f82cf878d6af 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -211,8 +211,6 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, return -EINVAL; } - pr_err("%s: Could not find signal %s\n", __func__, muxname); - return -ENODEV; } @@ -234,6 +232,8 @@ int __init omap_mux_get_by_name(const char *muxname, return mux_mode; } + pr_err("%s: Could not find signal %s\n", __func__, muxname); + return -ENODEV; } @@ -739,8 +739,9 @@ static void __init omap_mux_dbg_create_entry( list_for_each_entry(e, &partition->muxmodes, node) { struct omap_mux *m = &e->mux; - (void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir, - m, &omap_mux_dbg_signal_fops); + (void)debugfs_create_file(m->muxnames[0], S_IWUSR | S_IRUGO, + mux_dbg_dir, m, + &omap_mux_dbg_signal_fops); } } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index a8984989dec8..c2c798c08c2b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2055,6 +2055,23 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh) } /** + * _enable_preprogram - Pre-program an IP block during the _enable() process + * @oh: struct omap_hwmod * + * + * Some IP blocks (such as AESS) require some additional programming + * after enable before they can enter idle. If a function pointer to + * do so is present in the hwmod data, then call it and pass along the + * return value; otherwise, return 0. + */ +static int __init _enable_preprogram(struct omap_hwmod *oh) +{ + if (!oh->class->enable_preprogram) + return 0; + + return oh->class->enable_preprogram(oh); +} + +/** * _enable - enable an omap_hwmod * @oh: struct omap_hwmod * * @@ -2160,6 +2177,7 @@ static int _enable(struct omap_hwmod *oh) _update_sysc_cache(oh); _enable_sysc(oh); } + r = _enable_preprogram(oh); } else { if (soc_ops.disable_module) soc_ops.disable_module(oh); @@ -3049,11 +3067,8 @@ static int _am33xx_assert_hardreset(struct omap_hwmod *oh, static int _am33xx_deassert_hardreset(struct omap_hwmod *oh, struct omap_hwmod_rst_info *ohri) { - if (ohri->st_shift) - pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", - oh->name, ohri->name); - return am33xx_prm_deassert_hardreset(ohri->rst_shift, + ohri->st_shift, oh->clkdm->pwrdm.ptr->prcm_offs, oh->prcm.omap4.rstctrl_offs, oh->prcm.omap4.rstst_offs); diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 80c00e706d69..d43d9b608eda 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -510,6 +510,7 @@ struct omap_hwmod_omap4_prcm { * @rev: revision of the IP class * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown * @reset: ptr to fn to be executed in place of the standard hwmod reset fn + * @enable_preprogram: ptr to fn to be executed during device enable * * Represent the class of a OMAP hardware "modules" (e.g. timer, * smartreflex, gpio, uart...) @@ -533,6 +534,7 @@ struct omap_hwmod_class { u32 rev; int (*pre_shutdown)(struct omap_hwmod *oh); int (*reset)(struct omap_hwmod *oh); + int (*enable_preprogram)(struct omap_hwmod *oh); }; /** @@ -680,6 +682,12 @@ extern void __init omap_hwmod_init(void); const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh); /* + * + */ + +extern int omap_hwmod_aess_preprogram(struct omap_hwmod *oh); + +/* * Chip variant-specific hwmod init routines - XXX should be converted * to use initcalls once the initial boot ordering is straightened out */ diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 646c14d9fdb9..26eee4a556ad 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -262,13 +262,15 @@ static struct omap_hwmod am33xx_wkup_m3_hwmod = { .name = "wkup_m3", .class = &am33xx_wkup_m3_hwmod_class, .clkdm_name = "l4_wkup_aon_clkdm", - .flags = HWMOD_INIT_NO_RESET, /* Keep hardreset asserted */ + /* Keep hardreset asserted */ + .flags = HWMOD_INIT_NO_RESET | HWMOD_NO_IDLEST, .mpu_irqs = am33xx_wkup_m3_irqs, .main_clk = "dpll_core_m4_div2_ck", .prcm = { .omap4 = { .clkctrl_offs = AM33XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET, .rstctrl_offs = AM33XX_RM_WKUP_RSTCTRL_OFFSET, + .rstst_offs = AM33XX_RM_WKUP_RSTST_OFFSET, .modulemode = MODULEMODE_SWCTRL, }, }, @@ -414,7 +416,6 @@ static struct omap_hwmod am33xx_adc_tsc_hwmod = { * - cEFUSE (doesn't fall under any ocp_if) * - clkdiv32k * - debugss - * - ocmc ram * - ocp watch point * - aes0 * - sha0 @@ -481,25 +482,6 @@ static struct omap_hwmod am33xx_debugss_hwmod = { }, }; -/* ocmcram */ -static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = { - .name = "ocmcram", -}; - -static struct omap_hwmod am33xx_ocmcram_hwmod = { - .name = "ocmcram", - .class = &am33xx_ocmcram_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - /* ocpwp */ static struct omap_hwmod_class am33xx_ocpwp_hwmod_class = { .name = "ocpwp", @@ -570,6 +552,25 @@ static struct omap_hwmod am33xx_sha0_hwmod = { #endif +/* ocmcram */ +static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = { + .name = "ocmcram", +}; + +static struct omap_hwmod am33xx_ocmcram_hwmod = { + .name = "ocmcram", + .class = &am33xx_ocmcram_hwmod_class, + .clkdm_name = "l3_clkdm", + .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), + .main_clk = "l3_gclk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + /* 'smartreflex' class */ static struct omap_hwmod_class am33xx_smartreflex_hwmod_class = { .name = "smartreflex", @@ -783,9 +784,7 @@ static struct omap_hwmod am33xx_elm_hwmod = { }, }; -/* - * 'epwmss' class: ecap0,1,2, ehrpwm0,1,2 - */ +/* pwmss */ static struct omap_hwmod_class_sysconfig am33xx_epwmss_sysc = { .rev_offs = 0x0, .sysc_offs = 0x4, @@ -801,18 +800,23 @@ static struct omap_hwmod_class am33xx_epwmss_hwmod_class = { .sysc = &am33xx_epwmss_sysc, }; -/* ehrpwm0 */ -static struct omap_hwmod_irq_info am33xx_ehrpwm0_irqs[] = { - { .name = "int", .irq = 86 + OMAP_INTC_START, }, - { .name = "tzint", .irq = 58 + OMAP_INTC_START, }, - { .irq = -1 }, +static struct omap_hwmod_class am33xx_ecap_hwmod_class = { + .name = "ecap", }; -static struct omap_hwmod am33xx_ehrpwm0_hwmod = { - .name = "ehrpwm0", +static struct omap_hwmod_class am33xx_eqep_hwmod_class = { + .name = "eqep", +}; + +static struct omap_hwmod_class am33xx_ehrpwm_hwmod_class = { + .name = "ehrpwm", +}; + +/* epwmss0 */ +static struct omap_hwmod am33xx_epwmss0_hwmod = { + .name = "epwmss0", .class = &am33xx_epwmss_hwmod_class, .clkdm_name = "l4ls_clkdm", - .mpu_irqs = am33xx_ehrpwm0_irqs, .main_clk = "l4ls_gclk", .prcm = { .omap4 = { @@ -822,63 +826,58 @@ static struct omap_hwmod am33xx_ehrpwm0_hwmod = { }, }; -/* ehrpwm1 */ -static struct omap_hwmod_irq_info am33xx_ehrpwm1_irqs[] = { - { .name = "int", .irq = 87 + OMAP_INTC_START, }, - { .name = "tzint", .irq = 59 + OMAP_INTC_START, }, +/* ecap0 */ +static struct omap_hwmod_irq_info am33xx_ecap0_irqs[] = { + { .irq = 31 + OMAP_INTC_START, }, { .irq = -1 }, }; -static struct omap_hwmod am33xx_ehrpwm1_hwmod = { - .name = "ehrpwm1", - .class = &am33xx_epwmss_hwmod_class, +static struct omap_hwmod am33xx_ecap0_hwmod = { + .name = "ecap0", + .class = &am33xx_ecap_hwmod_class, .clkdm_name = "l4ls_clkdm", - .mpu_irqs = am33xx_ehrpwm1_irqs, + .mpu_irqs = am33xx_ecap0_irqs, .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, }; -/* ehrpwm2 */ -static struct omap_hwmod_irq_info am33xx_ehrpwm2_irqs[] = { - { .name = "int", .irq = 39 + OMAP_INTC_START, }, - { .name = "tzint", .irq = 60 + OMAP_INTC_START, }, +/* eqep0 */ +static struct omap_hwmod_irq_info am33xx_eqep0_irqs[] = { + { .irq = 79 + OMAP_INTC_START, }, { .irq = -1 }, }; -static struct omap_hwmod am33xx_ehrpwm2_hwmod = { - .name = "ehrpwm2", - .class = &am33xx_epwmss_hwmod_class, +static struct omap_hwmod am33xx_eqep0_hwmod = { + .name = "eqep0", + .class = &am33xx_eqep_hwmod_class, .clkdm_name = "l4ls_clkdm", - .mpu_irqs = am33xx_ehrpwm2_irqs, + .mpu_irqs = am33xx_eqep0_irqs, .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, }; -/* ecap0 */ -static struct omap_hwmod_irq_info am33xx_ecap0_irqs[] = { - { .irq = 31 + OMAP_INTC_START, }, +/* ehrpwm0 */ +static struct omap_hwmod_irq_info am33xx_ehrpwm0_irqs[] = { + { .name = "int", .irq = 86 + OMAP_INTC_START, }, + { .name = "tzint", .irq = 58 + OMAP_INTC_START, }, { .irq = -1 }, }; -static struct omap_hwmod am33xx_ecap0_hwmod = { - .name = "ecap0", +static struct omap_hwmod am33xx_ehrpwm0_hwmod = { + .name = "ehrpwm0", + .class = &am33xx_ehrpwm_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .mpu_irqs = am33xx_ehrpwm0_irqs, + .main_clk = "l4ls_gclk", +}; + +/* epwmss1 */ +static struct omap_hwmod am33xx_epwmss1_hwmod = { + .name = "epwmss1", .class = &am33xx_epwmss_hwmod_class, .clkdm_name = "l4ls_clkdm", - .mpu_irqs = am33xx_ecap0_irqs, .main_clk = "l4ls_gclk", .prcm = { .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET, + .clkctrl_offs = AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET, .modulemode = MODULEMODE_SWCTRL, }, }, @@ -892,13 +891,50 @@ static struct omap_hwmod_irq_info am33xx_ecap1_irqs[] = { static struct omap_hwmod am33xx_ecap1_hwmod = { .name = "ecap1", - .class = &am33xx_epwmss_hwmod_class, + .class = &am33xx_ecap_hwmod_class, .clkdm_name = "l4ls_clkdm", .mpu_irqs = am33xx_ecap1_irqs, .main_clk = "l4ls_gclk", +}; + +/* eqep1 */ +static struct omap_hwmod_irq_info am33xx_eqep1_irqs[] = { + { .irq = 88 + OMAP_INTC_START, }, + { .irq = -1 }, +}; + +static struct omap_hwmod am33xx_eqep1_hwmod = { + .name = "eqep1", + .class = &am33xx_eqep_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .mpu_irqs = am33xx_eqep1_irqs, + .main_clk = "l4ls_gclk", +}; + +/* ehrpwm1 */ +static struct omap_hwmod_irq_info am33xx_ehrpwm1_irqs[] = { + { .name = "int", .irq = 87 + OMAP_INTC_START, }, + { .name = "tzint", .irq = 59 + OMAP_INTC_START, }, + { .irq = -1 }, +}; + +static struct omap_hwmod am33xx_ehrpwm1_hwmod = { + .name = "ehrpwm1", + .class = &am33xx_ehrpwm_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .mpu_irqs = am33xx_ehrpwm1_irqs, + .main_clk = "l4ls_gclk", +}; + +/* epwmss2 */ +static struct omap_hwmod am33xx_epwmss2_hwmod = { + .name = "epwmss2", + .class = &am33xx_epwmss_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", .prcm = { .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET, + .clkctrl_offs = AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET, .modulemode = MODULEMODE_SWCTRL, }, }, @@ -912,16 +948,39 @@ static struct omap_hwmod_irq_info am33xx_ecap2_irqs[] = { static struct omap_hwmod am33xx_ecap2_hwmod = { .name = "ecap2", + .class = &am33xx_ecap_hwmod_class, + .clkdm_name = "l4ls_clkdm", .mpu_irqs = am33xx_ecap2_irqs, - .class = &am33xx_epwmss_hwmod_class, + .main_clk = "l4ls_gclk", +}; + +/* eqep2 */ +static struct omap_hwmod_irq_info am33xx_eqep2_irqs[] = { + { .irq = 89 + OMAP_INTC_START, }, + { .irq = -1 }, +}; + +static struct omap_hwmod am33xx_eqep2_hwmod = { + .name = "eqep2", + .class = &am33xx_eqep_hwmod_class, .clkdm_name = "l4ls_clkdm", + .mpu_irqs = am33xx_eqep2_irqs, + .main_clk = "l4ls_gclk", +}; + +/* ehrpwm2 */ +static struct omap_hwmod_irq_info am33xx_ehrpwm2_irqs[] = { + { .name = "int", .irq = 39 + OMAP_INTC_START, }, + { .name = "tzint", .irq = 60 + OMAP_INTC_START, }, + { .irq = -1 }, +}; + +static struct omap_hwmod am33xx_ehrpwm2_hwmod = { + .name = "ehrpwm2", + .class = &am33xx_ehrpwm_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .mpu_irqs = am33xx_ehrpwm2_irqs, .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, }; /* @@ -1824,6 +1883,7 @@ static struct omap_hwmod am33xx_tptc0_hwmod = { .class = &am33xx_tptc_hwmod_class, .clkdm_name = "l3_clkdm", .mpu_irqs = am33xx_tptc0_irqs, + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, .main_clk = "l3_gclk", .prcm = { .omap4 = { @@ -2496,7 +2556,6 @@ static struct omap_hwmod_addr_space am33xx_cpgmac0_addr_space[] = { { .pa_start = 0x4a100000, .pa_end = 0x4a100000 + SZ_2K - 1, - .flags = ADDR_TYPE_RT, }, /* cpsw wr */ { @@ -2547,162 +2606,202 @@ static struct omap_hwmod_ocp_if am33xx_l4_ls__elm = { .user = OCP_USER_MPU, }; -/* - * Splitting the resources to handle access of PWMSS config space - * and module specific part independently - */ -static struct omap_hwmod_addr_space am33xx_ehrpwm0_addr_space[] = { +static struct omap_hwmod_addr_space am33xx_epwmss0_addr_space[] = { { .pa_start = 0x48300000, .pa_end = 0x48300000 + SZ_16 - 1, .flags = ADDR_TYPE_RT }, - { - .pa_start = 0x48300200, - .pa_end = 0x48300200 + SZ_256 - 1, - .flags = ADDR_TYPE_RT - }, { } }; -static struct omap_hwmod_ocp_if am33xx_l4_ls__ehrpwm0 = { +static struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = { .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_ehrpwm0_hwmod, + .slave = &am33xx_epwmss0_hwmod, .clk = "l4ls_gclk", - .addr = am33xx_ehrpwm0_addr_space, + .addr = am33xx_epwmss0_addr_space, .user = OCP_USER_MPU, }; -/* - * Splitting the resources to handle access of PWMSS config space - * and module specific part independently - */ -static struct omap_hwmod_addr_space am33xx_ehrpwm1_addr_space[] = { - { - .pa_start = 0x48302000, - .pa_end = 0x48302000 + SZ_16 - 1, - .flags = ADDR_TYPE_RT - }, +static struct omap_hwmod_addr_space am33xx_ecap0_addr_space[] = { { - .pa_start = 0x48302200, - .pa_end = 0x48302200 + SZ_256 - 1, - .flags = ADDR_TYPE_RT + .pa_start = 0x48300100, + .pa_end = 0x48300100 + SZ_128 - 1, }, { } }; -static struct omap_hwmod_ocp_if am33xx_l4_ls__ehrpwm1 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_ehrpwm1_hwmod, +static struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0 = { + .master = &am33xx_epwmss0_hwmod, + .slave = &am33xx_ecap0_hwmod, .clk = "l4ls_gclk", - .addr = am33xx_ehrpwm1_addr_space, + .addr = am33xx_ecap0_addr_space, .user = OCP_USER_MPU, }; -/* - * Splitting the resources to handle access of PWMSS config space - * and module specific part independently - */ -static struct omap_hwmod_addr_space am33xx_ehrpwm2_addr_space[] = { +static struct omap_hwmod_addr_space am33xx_eqep0_addr_space[] = { { - .pa_start = 0x48304000, - .pa_end = 0x48304000 + SZ_16 - 1, - .flags = ADDR_TYPE_RT - }, - { - .pa_start = 0x48304200, - .pa_end = 0x48304200 + SZ_256 - 1, - .flags = ADDR_TYPE_RT + .pa_start = 0x48300180, + .pa_end = 0x48300180 + SZ_128 - 1, }, { } }; -static struct omap_hwmod_ocp_if am33xx_l4_ls__ehrpwm2 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_ehrpwm2_hwmod, +static struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0 = { + .master = &am33xx_epwmss0_hwmod, + .slave = &am33xx_eqep0_hwmod, .clk = "l4ls_gclk", - .addr = am33xx_ehrpwm2_addr_space, + .addr = am33xx_eqep0_addr_space, .user = OCP_USER_MPU, }; -/* - * Splitting the resources to handle access of PWMSS config space - * and module specific part independently - */ -static struct omap_hwmod_addr_space am33xx_ecap0_addr_space[] = { - { - .pa_start = 0x48300000, - .pa_end = 0x48300000 + SZ_16 - 1, - .flags = ADDR_TYPE_RT - }, +static struct omap_hwmod_addr_space am33xx_ehrpwm0_addr_space[] = { { - .pa_start = 0x48300100, - .pa_end = 0x48300100 + SZ_256 - 1, - .flags = ADDR_TYPE_RT + .pa_start = 0x48300200, + .pa_end = 0x48300200 + SZ_128 - 1, }, { } }; -static struct omap_hwmod_ocp_if am33xx_l4_ls__ecap0 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_ecap0_hwmod, +static struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0 = { + .master = &am33xx_epwmss0_hwmod, + .slave = &am33xx_ehrpwm0_hwmod, .clk = "l4ls_gclk", - .addr = am33xx_ecap0_addr_space, + .addr = am33xx_ehrpwm0_addr_space, .user = OCP_USER_MPU, }; -/* - * Splitting the resources to handle access of PWMSS config space - * and module specific part independently - */ -static struct omap_hwmod_addr_space am33xx_ecap1_addr_space[] = { + +static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = { { .pa_start = 0x48302000, .pa_end = 0x48302000 + SZ_16 - 1, .flags = ADDR_TYPE_RT }, + { } +}; + +static struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_epwmss1_hwmod, + .clk = "l4ls_gclk", + .addr = am33xx_epwmss1_addr_space, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am33xx_ecap1_addr_space[] = { { .pa_start = 0x48302100, - .pa_end = 0x48302100 + SZ_256 - 1, - .flags = ADDR_TYPE_RT + .pa_end = 0x48302100 + SZ_128 - 1, }, { } }; -static struct omap_hwmod_ocp_if am33xx_l4_ls__ecap1 = { - .master = &am33xx_l4_ls_hwmod, +static struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1 = { + .master = &am33xx_epwmss1_hwmod, .slave = &am33xx_ecap1_hwmod, .clk = "l4ls_gclk", .addr = am33xx_ecap1_addr_space, .user = OCP_USER_MPU, }; -/* - * Splitting the resources to handle access of PWMSS config space - * and module specific part independently - */ -static struct omap_hwmod_addr_space am33xx_ecap2_addr_space[] = { +static struct omap_hwmod_addr_space am33xx_eqep1_addr_space[] = { + { + .pa_start = 0x48302180, + .pa_end = 0x48302180 + SZ_128 - 1, + }, + { } +}; + +static struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1 = { + .master = &am33xx_epwmss1_hwmod, + .slave = &am33xx_eqep1_hwmod, + .clk = "l4ls_gclk", + .addr = am33xx_eqep1_addr_space, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am33xx_ehrpwm1_addr_space[] = { + { + .pa_start = 0x48302200, + .pa_end = 0x48302200 + SZ_128 - 1, + }, + { } +}; + +static struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1 = { + .master = &am33xx_epwmss1_hwmod, + .slave = &am33xx_ehrpwm1_hwmod, + .clk = "l4ls_gclk", + .addr = am33xx_ehrpwm1_addr_space, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = { { .pa_start = 0x48304000, .pa_end = 0x48304000 + SZ_16 - 1, .flags = ADDR_TYPE_RT }, + { } +}; + +static struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_epwmss2_hwmod, + .clk = "l4ls_gclk", + .addr = am33xx_epwmss2_addr_space, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am33xx_ecap2_addr_space[] = { { .pa_start = 0x48304100, - .pa_end = 0x48304100 + SZ_256 - 1, - .flags = ADDR_TYPE_RT + .pa_end = 0x48304100 + SZ_128 - 1, }, { } }; -static struct omap_hwmod_ocp_if am33xx_l4_ls__ecap2 = { - .master = &am33xx_l4_ls_hwmod, +static struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2 = { + .master = &am33xx_epwmss2_hwmod, .slave = &am33xx_ecap2_hwmod, .clk = "l4ls_gclk", .addr = am33xx_ecap2_addr_space, .user = OCP_USER_MPU, }; +static struct omap_hwmod_addr_space am33xx_eqep2_addr_space[] = { + { + .pa_start = 0x48304180, + .pa_end = 0x48304180 + SZ_128 - 1, + }, + { } +}; + +static struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2 = { + .master = &am33xx_epwmss2_hwmod, + .slave = &am33xx_eqep2_hwmod, + .clk = "l4ls_gclk", + .addr = am33xx_eqep2_addr_space, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am33xx_ehrpwm2_addr_space[] = { + { + .pa_start = 0x48304200, + .pa_end = 0x48304200 + SZ_128 - 1, + }, + { } +}; + +static struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = { + .master = &am33xx_epwmss2_hwmod, + .slave = &am33xx_ehrpwm2_hwmod, + .clk = "l4ls_gclk", + .addr = am33xx_ehrpwm2_addr_space, + .user = OCP_USER_MPU, +}; + /* l3s cfg -> gpmc */ static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = { { @@ -3328,6 +3427,13 @@ static struct omap_hwmod_ocp_if am33xx_l3_s__usbss = { .flags = OCPIF_SWSUP_IDLE, }; +/* l3 main -> ocmc */ +static struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_ocmcram_hwmod, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_fw__emif_fw, &am33xx_l3_main__emif, @@ -3385,12 +3491,18 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_ls__uart6, &am33xx_l4_ls__spinlock, &am33xx_l4_ls__elm, - &am33xx_l4_ls__ehrpwm0, - &am33xx_l4_ls__ehrpwm1, - &am33xx_l4_ls__ehrpwm2, - &am33xx_l4_ls__ecap0, - &am33xx_l4_ls__ecap1, - &am33xx_l4_ls__ecap2, + &am33xx_l4_ls__epwmss0, + &am33xx_epwmss0__ecap0, + &am33xx_epwmss0__eqep0, + &am33xx_epwmss0__ehrpwm0, + &am33xx_l4_ls__epwmss1, + &am33xx_epwmss1__ecap1, + &am33xx_epwmss1__eqep1, + &am33xx_epwmss1__ehrpwm1, + &am33xx_l4_ls__epwmss2, + &am33xx_epwmss2__ecap2, + &am33xx_epwmss2__eqep2, + &am33xx_epwmss2__ehrpwm2, &am33xx_l3_s__gpmc, &am33xx_l3_main__lcdc, &am33xx_l4_ls__mcspi0, @@ -3398,6 +3510,7 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__tptc0, &am33xx_l3_main__tptc1, &am33xx_l3_main__tptc2, + &am33xx_l3_main__ocmc, &am33xx_l3_s__usbss, &am33xx_l4_hs__cpgmac0, &am33xx_cpgmac0__mdio, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 8bb2628df34e..ac7e03ec952f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3493,7 +3493,12 @@ static struct omap_hwmod am35xx_emac_hwmod = { .name = "davinci_emac", .mpu_irqs = am35xx_emac_mpu_irqs, .class = &am35xx_emac_class, - .flags = HWMOD_NO_IDLEST, + /* + * According to Mark Greer, the MPU will not return from WFI + * when the EMAC signals an interrupt. + * http://www.spinics.net/lists/arm-kernel/msg174734.html + */ + .flags = (HWMOD_NO_IDLEST | HWMOD_BLOCK_WFI), }; /* l3_core -> davinci emac interface */ diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 7ec1083ff604..0e47d2e1687c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -322,6 +322,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_aess_sysc = { static struct omap_hwmod_class omap44xx_aess_hwmod_class = { .name = "aess", .sysc = &omap44xx_aess_sysc, + .enable_preprogram = omap_hwmod_aess_preprogram, }; /* aess */ @@ -348,7 +349,7 @@ static struct omap_hwmod omap44xx_aess_hwmod = { .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_aess_irqs, .sdma_reqs = omap44xx_aess_sdma_reqs, - .main_clk = "aess_fck", + .main_clk = "aess_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET, @@ -4241,6 +4242,27 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp_wp_noc = { static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = { { + .name = "dmem", + .pa_start = 0x40180000, + .pa_end = 0x4018ffff + }, + { + .name = "cmem", + .pa_start = 0x401a0000, + .pa_end = 0x401a1fff + }, + { + .name = "smem", + .pa_start = 0x401c0000, + .pa_end = 0x401c5fff + }, + { + .name = "pmem", + .pa_start = 0x401e0000, + .pa_end = 0x401e1fff + }, + { + .name = "mpu", .pa_start = 0x401f1000, .pa_end = 0x401f13ff, .flags = ADDR_TYPE_RT @@ -4259,6 +4281,27 @@ static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = { static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = { { + .name = "dmem_dma", + .pa_start = 0x49080000, + .pa_end = 0x4908ffff + }, + { + .name = "cmem_dma", + .pa_start = 0x490a0000, + .pa_end = 0x490a1fff + }, + { + .name = "smem_dma", + .pa_start = 0x490c0000, + .pa_end = 0x490c5fff + }, + { + .name = "pmem_dma", + .pa_start = 0x490e0000, + .pa_end = 0x490e1fff + }, + { + .name = "dma", .pa_start = 0x490f1000, .pa_end = 0x490f13ff, .flags = ADDR_TYPE_RT @@ -6268,7 +6311,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l3_main_1__l3_main_3, &omap44xx_l3_main_2__l3_main_3, &omap44xx_l4_cfg__l3_main_3, - /* &omap44xx_aess__l4_abe, */ + &omap44xx_aess__l4_abe, &omap44xx_dsp__l4_abe, &omap44xx_l3_main_1__l4_abe, &omap44xx_mpu__l4_abe, @@ -6277,8 +6320,8 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_cfg__l4_wkup, &omap44xx_mpu__mpu_private, &omap44xx_l4_cfg__ocp_wp_noc, - /* &omap44xx_l4_abe__aess, */ - /* &omap44xx_l4_abe__aess_dma, */ + &omap44xx_l4_abe__aess, + &omap44xx_l4_abe__aess_dma, &omap44xx_l3_main_2__c2c, &omap44xx_l4_wkup__counter_32k, &omap44xx_l4_cfg__ctrl_module_core, diff --git a/arch/arm/mach-omap2/omap_hwmod_reset.c b/arch/arm/mach-omap2/omap_hwmod_reset.c new file mode 100644 index 000000000000..65e186c9df55 --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod_reset.c @@ -0,0 +1,53 @@ +/* + * OMAP IP block custom reset and preprogramming stubs + * + * Copyright (C) 2012 Texas Instruments, Inc. + * Paul Walmsley + * + * A small number of IP blocks need custom reset and preprogramming + * functions. The stubs in this file provide a standard way for the + * hwmod code to call these functions, which are to be located under + * drivers/. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ +#include <linux/kernel.h> +#include <linux/errno.h> + +#include <sound/aess.h> + +#include "omap_hwmod.h" + +/** + * omap_hwmod_aess_preprogram - enable AESS internal autogating + * @oh: struct omap_hwmod * + * + * The AESS will not IdleAck to the PRCM until its internal autogating + * is enabled. Since internal autogating is disabled by default after + * AESS reset, we must enable autogating after the hwmod code resets + * the AESS. Returns 0. + */ +int omap_hwmod_aess_preprogram(struct omap_hwmod *oh) +{ + void __iomem *va; + + va = omap_hwmod_get_mpu_rt_va(oh); + if (!va) + return -EINVAL; + + aess_enable_autogating(va); + + return 0; +} diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index cd6682df5625..673a4c1d1d76 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -282,19 +282,19 @@ int __init omap2_common_pm_late_init(void) * a completely different mechanism. * Disable this part if a DT blob is available. */ - if (of_have_populated_dt()) - return 0; + if (!of_have_populated_dt()) { - /* Init the voltage layer */ - omap_pmic_late_init(); - omap_voltage_late_init(); + /* Init the voltage layer */ + omap_pmic_late_init(); + omap_voltage_late_init(); - /* Initialize the voltages */ - omap3_init_voltages(); - omap4_init_voltages(); + /* Initialize the voltages */ + omap3_init_voltages(); + omap4_init_voltages(); - /* Smartreflex device init */ - omap_devinit_smartreflex(); + /* Smartreflex device init */ + omap_devinit_smartreflex(); + } #ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index b2a4df623545..b59d93908341 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -54,7 +54,6 @@ #include "powerdomain.h" #include "clockdomain.h" -static void (*omap2_sram_idle)(void); static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl, void __iomem *sdrc_power); @@ -163,6 +162,8 @@ static int omap2_allow_mpu_retention(void) static void omap2_enter_mpu_retention(void) { + const int zero = 0; + /* The peripherals seem not to be able to wake up the MPU when * it is in retention mode. */ if (omap2_allow_mpu_retention()) { @@ -179,7 +180,8 @@ static void omap2_enter_mpu_retention(void) pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); } - omap2_sram_idle(); + /* WFI */ + asm("mcr p15, 0, %0, c7, c0, 4" : : "r" (zero) : "memory", "cc"); pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); } @@ -333,11 +335,9 @@ int __init omap2_pm_init(void) /* * We copy the assembler sleep/wakeup routines to SRAM. * These routines need to be in SRAM as that's the only - * memory the MPU can see when it wakes up. + * memory the MPU can see when it wakes up after the entire + * chip enters idle. */ - omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend, - omap24xx_idle_loop_suspend_sz); - omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend, omap24xx_cpu_suspend_sz); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index aa6fd98f606e..ea62e75ef21d 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -77,10 +77,20 @@ static int omap4_pm_suspend(void) omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->saved_logic_state); } - if (ret) + if (ret) { pr_crit("Could not enter target state in pm_suspend\n"); - else + /* + * OMAP4 chip PM currently works only with certain (newer) + * versions of bootloaders. This is due to missing code in the + * kernel to properly reset and initialize some devices. + * Warn the user about the bootloader version being one of the + * possible causes. + * http://www.spinics.net/lists/arm-kernel/msg218641.html + */ + pr_warn("A possible cause could be an old bootloader - try u-boot >= v2012.07\n"); + } else { pr_info("Successfully put all powerdomains to target state\n"); + } return 0; } @@ -146,6 +156,13 @@ int __init omap4_pm_init(void) } pr_err("Power Management for TI OMAP4.\n"); + /* + * OMAP4 chip PM currently works only with certain (newer) + * versions of bootloaders. This is due to missing code in the + * kernel to properly reset and initialize some devices. + * http://www.spinics.net/lists/arm-kernel/msg218641.html + */ + pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n"); ret = pwrdm_for_each(pwrdms_setup, NULL); if (ret) { diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c index 1ac73883f891..44c0d7216aa7 100644 --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -110,11 +110,11 @@ int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs) * -EINVAL upon an argument error, -EEXIST if the submodule was already out * of reset, or -EBUSY if the submodule did not exit reset promptly. */ -int am33xx_prm_deassert_hardreset(u8 shift, s16 inst, +int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst, u16 rstctrl_offs, u16 rstst_offs) { int c; - u32 mask = 1 << shift; + u32 mask = 1 << st_shift; /* Check the current status to avoid de-asserting the line twice */ if (am33xx_prm_is_hardreset_asserted(shift, inst, rstctrl_offs) == 0) @@ -122,11 +122,14 @@ int am33xx_prm_deassert_hardreset(u8 shift, s16 inst, /* Clear the reset status by writing 1 to the status bit */ am33xx_prm_rmw_reg_bits(0xffffffff, mask, inst, rstst_offs); + /* de-assert the reset control line */ + mask = 1 << shift; + am33xx_prm_rmw_reg_bits(mask, 0, inst, rstctrl_offs); - /* wait the status to be set */ - omap_test_timeout(am33xx_prm_is_hardreset_asserted(shift, inst, + /* wait the status to be set */ + omap_test_timeout(am33xx_prm_is_hardreset_asserted(st_shift, inst, rstst_offs), MAX_MODULE_HARDRESET_WAIT, c); diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h index 3f25c563a821..9b9918dfb119 100644 --- a/arch/arm/mach-omap2/prm33xx.h +++ b/arch/arm/mach-omap2/prm33xx.h @@ -117,6 +117,7 @@ #define AM33XX_PM_CEFUSE_PWRSTST_OFFSET 0x0004 #define AM33XX_PM_CEFUSE_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004) +#ifndef __ASSEMBLER__ extern u32 am33xx_prm_read_reg(s16 inst, u16 idx); extern void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx); extern u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); @@ -124,6 +125,7 @@ extern void am33xx_prm_global_warm_sw_reset(void); extern int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs); extern int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs); -extern int am33xx_prm_deassert_hardreset(u8 shift, s16 inst, +extern int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst, u16 rstctrl_offs, u16 rstst_offs); +#endif /* ASSEMBLER */ #endif diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index ce0ccd26efbd..1d3cb25c9629 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -37,25 +37,6 @@ .text /* - * Forces OMAP into idle state - * - * omap24xx_idle_loop_suspend() - This bit of code just executes the WFI - * for normal idles. - * - * Note: This code get's copied to internal SRAM at boot. When the OMAP - * wakes up it continues execution at the point it went to sleep. - */ - .align 3 -ENTRY(omap24xx_idle_loop_suspend) - stmfd sp!, {r0, lr} @ save registers on stack - mov r0, #0 @ clear for mcr setup - mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt - ldmfd sp!, {r0, pc} @ restore regs and return - -ENTRY(omap24xx_idle_loop_suspend_sz) - .word . - omap24xx_idle_loop_suspend - -/* * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing * SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore * SDRC. diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 092aedd7ed13..c62116bbc760 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -395,6 +395,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define AM335X_CLASS 0x33500033 #define AM335X_REV_ES1_0 AM335X_CLASS +#define AM335X_REV_ES2_0 (AM335X_CLASS | (0x1 << 8)) #define OMAP443X_CLASS 0x44300044 #define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index bb829e065400..d7bc33f15344 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -152,7 +152,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) sr_data->enable_on_init = sr_enable_on_init; - pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data), 0); + pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data)); if (IS_ERR(pdev)) pr_warning("%s: Could not build omap_device for %s: %s.\n\n", __func__, name, oh->name); diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 9e7998d3635f..3d91d2e5bf3a 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -927,8 +927,6 @@ static void tosa_restart(char mode, const char *cmd) static void __init tosa_init(void) { - int dummy; - pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config)); pxa_set_ffuart_info(NULL); @@ -947,10 +945,6 @@ static void __init tosa_init(void) /* enable batt_fault */ PMCR = 0x01; - dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12); - dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12); - dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16); - pxa_set_mci_info(&tosa_mci_platform_data); pxa_set_ficp_info(&tosa_ficp_platform_data); pxa_set_i2c_info(NULL); diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index ec29b35f25c0..6af1aa1ef213 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -23,13 +23,12 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/amba/pl080.h> #include <mach/dma.h> #include <mach/map.h> #include <mach/irqs.h> -#include <asm/hardware/pl080.h> - #include "regs-sys.h" /* dma channel state information */ diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 570481591746..3a38f7b34b94 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -840,12 +840,12 @@ static struct i2c_board_info noon010pc30_board_info = { .platform_data = &noon010pc30_pldata, }; -static struct s5p_fimc_isp_info goni_camera_sensors[] = { +static struct fimc_source_info goni_camera_sensors[] = { { .mux_id = 0, .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, - .bus_type = FIMC_ITU_601, + .bus_type = FIMC_BUS_TYPE_ITU_601, .board_info = &noon010pc30_board_info, .i2c_bus_num = 0, .clk_frequency = 16000000UL, @@ -853,7 +853,7 @@ static struct s5p_fimc_isp_info goni_camera_sensors[] = { }; static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = { - .isp_info = goni_camera_sensors, + .source_info = goni_camera_sensors, .num_clients = ARRAY_SIZE(goni_camera_sensors), }; diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 30ac79c7c687..8b85d4d8fab6 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -27,6 +27,7 @@ #include <linux/serial_sci.h> #include <linux/sh_dma.h> #include <linux/sh_timer.h> +#include <linux/platform_data/sh_ipmmu.h> #include <mach/dma-register.h> #include <mach/r8a7740.h> #include <mach/pm-rmobile.h> @@ -378,6 +379,37 @@ static struct platform_device tmu02_device = { .num_resources = ARRAY_SIZE(tmu02_resources), }; +/* IPMMUI (an IPMMU module for ICB/LMB) */ +static struct resource ipmmu_resources[] = { + [0] = { + .name = "IPMMUI", + .start = 0xfe951000, + .end = 0xfe9510ff, + .flags = IORESOURCE_MEM, + }, +}; + +static const char * const ipmmu_dev_names[] = { + "sh_mobile_lcdc_fb.0", + "sh_mobile_lcdc_fb.1", + "sh_mobile_ceu.0", +}; + +static struct shmobile_ipmmu_platform_data ipmmu_platform_data = { + .dev_names = ipmmu_dev_names, + .num_dev_names = ARRAY_SIZE(ipmmu_dev_names), +}; + +static struct platform_device ipmmu_device = { + .name = "ipmmu", + .id = -1, + .dev = { + .platform_data = &ipmmu_platform_data, + }, + .resource = ipmmu_resources, + .num_resources = ARRAY_SIZE(ipmmu_resources), +}; + static struct platform_device *r8a7740_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -392,6 +424,7 @@ static struct platform_device *r8a7740_early_devices[] __initdata = { &tmu00_device, &tmu01_device, &tmu02_device, + &ipmmu_device, }; /* DMA */ diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index d2079d5e3334..59c7146bf66f 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -33,6 +33,7 @@ #include <linux/sh_timer.h> #include <linux/pm_domain.h> #include <linux/dma-mapping.h> +#include <linux/platform_data/sh_ipmmu.h> #include <mach/dma-register.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -1008,6 +1009,43 @@ static struct platform_device spu1_device = { .num_resources = ARRAY_SIZE(spu1_resources), }; +/* IPMMUI (an IPMMU module for ICB/LMB) */ +static struct resource ipmmu_resources[] = { + [0] = { + .name = "IPMMUI", + .start = 0xfe951000, + .end = 0xfe9510ff, + .flags = IORESOURCE_MEM, + }, +}; + +static const char * const ipmmu_dev_names[] = { + "sh_mobile_lcdc_fb.0", + "sh_mobile_lcdc_fb.1", + "sh_mobile_ceu.0", + "uio_pdrv_genirq.0", + "uio_pdrv_genirq.1", + "uio_pdrv_genirq.2", + "uio_pdrv_genirq.3", + "uio_pdrv_genirq.4", + "uio_pdrv_genirq.5", +}; + +static struct shmobile_ipmmu_platform_data ipmmu_platform_data = { + .dev_names = ipmmu_dev_names, + .num_dev_names = ARRAY_SIZE(ipmmu_dev_names), +}; + +static struct platform_device ipmmu_device = { + .name = "ipmmu", + .id = -1, + .dev = { + .platform_data = &ipmmu_platform_data, + }, + .resource = ipmmu_resources, + .num_resources = ARRAY_SIZE(ipmmu_resources), +}; + static struct platform_device *sh7372_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -1019,6 +1057,7 @@ static struct platform_device *sh7372_early_devices[] __initdata = { &cmt2_device, &tmu00_device, &tmu01_device, + &ipmmu_device, }; static struct platform_device *sh7372_late_devices[] __initdata = { diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 2ecd6681692f..bdab575f88bc 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -31,6 +31,7 @@ #include <linux/sh_dma.h> #include <linux/sh_intc.h> #include <linux/sh_timer.h> +#include <linux/platform_data/sh_ipmmu.h> #include <mach/dma-register.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -780,6 +781,35 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; +/* an IPMMU module for ICB */ +static struct resource ipmmu_resources[] = { + [0] = { + .name = "IPMMU", + .start = 0xfe951000, + .end = 0xfe9510ff, + .flags = IORESOURCE_MEM, + }, +}; + +static const char * const ipmmu_dev_names[] = { + "sh_mobile_lcdc_fb.0", +}; + +static struct shmobile_ipmmu_platform_data ipmmu_platform_data = { + .dev_names = ipmmu_dev_names, + .num_dev_names = ARRAY_SIZE(ipmmu_dev_names), +}; + +static struct platform_device ipmmu_device = { + .name = "ipmmu", + .id = -1, + .dev = { + .platform_data = &ipmmu_platform_data, + }, + .resource = ipmmu_resources, + .num_resources = ARRAY_SIZE(ipmmu_resources), +}; + static struct platform_device *sh73a0_early_devices_dt[] __initdata = { &scif0_device, &scif1_device, @@ -796,6 +826,7 @@ static struct platform_device *sh73a0_early_devices_dt[] __initdata = { static struct platform_device *sh73a0_early_devices[] __initdata = { &tmu00_device, &tmu01_device, + &ipmmu_device, }; static struct platform_device *sh73a0_late_devices[] __initdata = { diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index b2ba516ca2d4..d2b3937c4014 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -14,9 +14,8 @@ #define pr_fmt(fmt) "SPEAr3xx: " fmt #include <linux/amba/pl022.h> -#include <linux/amba/pl08x.h> +#include <linux/amba/pl080.h> #include <linux/io.h> -#include <asm/hardware/pl080.h> #include <plat/pl080.h> #include <mach/generic.h> #include <mach/spear.h> diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index b8bd33ca88bd..8904d8a52d84 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -20,7 +20,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_platform.h> -#include <asm/hardware/pl080.h> +#include <linux/amba/pl080.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 3868aa4ff15e..b03457881c4b 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -28,7 +28,7 @@ #include <linux/mfd/tps6105x.h> #include <linux/mfd/abx500/ab8500-gpio.h> #include <linux/mfd/abx500/ab8500-codec.h> -#include <linux/leds-lp5521.h> +#include <linux/platform_data/leds-lp55xx.h> #include <linux/input.h> #include <linux/smsc911x.h> #include <linux/gpio_keys.h> @@ -301,7 +301,7 @@ static struct tc3589x_platform_data mop500_tc35892_data = { .irq_base = MOP500_EGPIO_IRQ_BASE, }; -static struct lp5521_led_config lp5521_pri_led[] = { +static struct lp55xx_led_config lp5521_pri_led[] = { [0] = { .chan_nr = 0, .led_current = 0x2f, @@ -319,14 +319,14 @@ static struct lp5521_led_config lp5521_pri_led[] = { }, }; -static struct lp5521_platform_data __initdata lp5521_pri_data = { +static struct lp55xx_platform_data __initdata lp5521_pri_data = { .label = "lp5521_pri", .led_config = &lp5521_pri_led[0], .num_channels = 3, - .clock_mode = LP5521_CLOCK_EXT, + .clock_mode = LP55XX_CLOCK_EXT, }; -static struct lp5521_led_config lp5521_sec_led[] = { +static struct lp55xx_led_config lp5521_sec_led[] = { [0] = { .chan_nr = 0, .led_current = 0x2f, @@ -344,11 +344,11 @@ static struct lp5521_led_config lp5521_sec_led[] = { }, }; -static struct lp5521_platform_data __initdata lp5521_sec_data = { +static struct lp55xx_platform_data __initdata lp5521_sec_data = { .label = "lp5521_sec", .led_config = &lp5521_sec_led[0], .num_channels = 3, - .clock_mode = LP5521_CLOCK_EXT, + .clock_mode = LP55XX_CLOCK_EXT, }; static struct i2c_board_info __initdata mop500_i2c0_devices[] = { diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index b820edaf3184..db26e2e543f4 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -749,7 +749,6 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) unsigned long instr = 0, instrptr; int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs); unsigned int type; - mm_segment_t fs; unsigned int fault; u16 tinstr = 0; int isize = 4; @@ -760,16 +759,15 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) instrptr = instruction_pointer(regs); - fs = get_fs(); - set_fs(KERNEL_DS); if (thumb_mode(regs)) { - fault = __get_user(tinstr, (u16 *)(instrptr & ~1)); + u16 *ptr = (u16 *)(instrptr & ~1); + fault = probe_kernel_address(ptr, tinstr); if (!fault) { if (cpu_architecture() >= CPU_ARCH_ARMv7 && IS_T32(tinstr)) { /* Thumb-2 32-bit */ u16 tinst2 = 0; - fault = __get_user(tinst2, (u16 *)(instrptr+2)); + fault = probe_kernel_address(ptr + 1, tinst2); instr = (tinstr << 16) | tinst2; thumb2_32b = 1; } else { @@ -778,8 +776,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) } } } else - fault = __get_user(instr, (u32 *)instrptr); - set_fs(fs); + fault = probe_kernel_address(instrptr, instr); if (fault) { type = TYPE_FAULT; diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 7a0511191f6b..a5a4b2bc42ba 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -152,9 +152,9 @@ static int is_reserved_asid(u64 asid) return 0; } -static void new_context(struct mm_struct *mm, unsigned int cpu) +static u64 new_context(struct mm_struct *mm, unsigned int cpu) { - u64 asid = mm->context.id; + u64 asid = atomic64_read(&mm->context.id); u64 generation = atomic64_read(&asid_generation); if (asid != 0 && is_reserved_asid(asid)) { @@ -181,13 +181,14 @@ static void new_context(struct mm_struct *mm, unsigned int cpu) cpumask_clear(mm_cpumask(mm)); } - mm->context.id = asid; + return asid; } void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) { unsigned long flags; unsigned int cpu = smp_processor_id(); + u64 asid; if (unlikely(mm->context.vmalloc_seq != init_mm.context.vmalloc_seq)) __check_vmalloc_seq(mm); @@ -198,20 +199,26 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) */ cpu_set_reserved_ttbr0(); - if (!((mm->context.id ^ atomic64_read(&asid_generation)) >> ASID_BITS) - && atomic64_xchg(&per_cpu(active_asids, cpu), mm->context.id)) + asid = atomic64_read(&mm->context.id); + if (!((asid ^ atomic64_read(&asid_generation)) >> ASID_BITS) + && atomic64_xchg(&per_cpu(active_asids, cpu), asid)) goto switch_mm_fastpath; raw_spin_lock_irqsave(&cpu_asid_lock, flags); /* Check that our ASID belongs to the current generation. */ - if ((mm->context.id ^ atomic64_read(&asid_generation)) >> ASID_BITS) - new_context(mm, cpu); - - atomic64_set(&per_cpu(active_asids, cpu), mm->context.id); - cpumask_set_cpu(cpu, mm_cpumask(mm)); + asid = atomic64_read(&mm->context.id); + if ((asid ^ atomic64_read(&asid_generation)) >> ASID_BITS) { + asid = new_context(mm, cpu); + atomic64_set(&mm->context.id, asid); + } - if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) + if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) { + local_flush_bp_all(); local_flush_tlb_all(); + } + + atomic64_set(&per_cpu(active_asids, cpu), asid); + cpumask_set_cpu(cpu, mm_cpumask(mm)); raw_spin_unlock_irqrestore(&cpu_asid_lock, flags); switch_mm_fastpath: diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index dda3904dc64c..c7e3759f16d3 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -186,13 +186,24 @@ static u64 get_coherent_dma_mask(struct device *dev) static void __dma_clear_buffer(struct page *page, size_t size) { - void *ptr; /* * Ensure that the allocated pages are zeroed, and that any data * lurking in the kernel direct-mapped region is invalidated. */ - ptr = page_address(page); - if (ptr) { + if (PageHighMem(page)) { + phys_addr_t base = __pfn_to_phys(page_to_pfn(page)); + phys_addr_t end = base + size; + while (size > 0) { + void *ptr = kmap_atomic(page); + memset(ptr, 0, PAGE_SIZE); + dmac_flush_range(ptr, ptr + PAGE_SIZE); + kunmap_atomic(ptr); + page++; + size -= PAGE_SIZE; + } + outer_flush_range(base, end); + } else { + void *ptr = page_address(page); memset(ptr, 0, size); dmac_flush_range(ptr, ptr + size); outer_flush_range(__pa(ptr), __pa(ptr) + size); @@ -243,7 +254,8 @@ static void __dma_free_buffer(struct page *page, size_t size) #endif static void *__alloc_from_contiguous(struct device *dev, size_t size, - pgprot_t prot, struct page **ret_page); + pgprot_t prot, struct page **ret_page, + const void *caller); static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp, pgprot_t prot, struct page **ret_page, @@ -346,10 +358,11 @@ static int __init atomic_pool_init(void) goto no_pages; if (IS_ENABLED(CONFIG_CMA)) - ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page); + ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page, + atomic_pool_init); else ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, - &page, NULL); + &page, atomic_pool_init); if (ptr) { int i; @@ -542,27 +555,41 @@ static int __free_from_pool(void *start, size_t size) } static void *__alloc_from_contiguous(struct device *dev, size_t size, - pgprot_t prot, struct page **ret_page) + pgprot_t prot, struct page **ret_page, + const void *caller) { unsigned long order = get_order(size); size_t count = size >> PAGE_SHIFT; struct page *page; + void *ptr; page = dma_alloc_from_contiguous(dev, count, order); if (!page) return NULL; __dma_clear_buffer(page, size); - __dma_remap(page, size, prot); + if (PageHighMem(page)) { + ptr = __dma_alloc_remap(page, size, GFP_KERNEL, prot, caller); + if (!ptr) { + dma_release_from_contiguous(dev, page, count); + return NULL; + } + } else { + __dma_remap(page, size, prot); + ptr = page_address(page); + } *ret_page = page; - return page_address(page); + return ptr; } static void __free_from_contiguous(struct device *dev, struct page *page, - size_t size) + void *cpu_addr, size_t size) { - __dma_remap(page, size, pgprot_kernel); + if (PageHighMem(page)) + __dma_free_remap(cpu_addr, size); + else + __dma_remap(page, size, pgprot_kernel); dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT); } @@ -583,9 +610,9 @@ static inline pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot) #define __get_dma_pgprot(attrs, prot) __pgprot(0) #define __alloc_remap_buffer(dev, size, gfp, prot, ret, c) NULL #define __alloc_from_pool(size, ret_page) NULL -#define __alloc_from_contiguous(dev, size, prot, ret) NULL +#define __alloc_from_contiguous(dev, size, prot, ret, c) NULL #define __free_from_pool(cpu_addr, size) 0 -#define __free_from_contiguous(dev, page, size) do { } while (0) +#define __free_from_contiguous(dev, page, cpu_addr, size) do { } while (0) #define __dma_free_remap(cpu_addr, size) do { } while (0) #endif /* CONFIG_MMU */ @@ -645,7 +672,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, else if (!IS_ENABLED(CONFIG_CMA)) addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller); else - addr = __alloc_from_contiguous(dev, size, prot, &page); + addr = __alloc_from_contiguous(dev, size, prot, &page, caller); if (addr) *handle = pfn_to_dma(dev, page_to_pfn(page)); @@ -739,7 +766,7 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, * Non-atomic allocations cannot be freed with IRQs disabled */ WARN_ON(irqs_disabled()); - __free_from_contiguous(dev, page, size); + __free_from_contiguous(dev, page, cpu_addr, size); } } @@ -1002,6 +1029,9 @@ static inline dma_addr_t __alloc_iova(struct dma_iommu_mapping *mapping, unsigned int count, start; unsigned long flags; + if (order > CONFIG_ARM_DMA_IOMMU_ALIGNMENT) + order = CONFIG_ARM_DMA_IOMMU_ALIGNMENT; + count = ((PAGE_ALIGN(size) >> PAGE_SHIFT) + (1 << mapping->order) - 1) >> mapping->order; @@ -1068,12 +1098,17 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, return pages; } + /* + * IOMMU can map any pages, so himem can also be used here + */ + gfp |= __GFP_NOWARN | __GFP_HIGHMEM; + while (count) { int j, order = __fls(count); - pages[i] = alloc_pages(gfp | __GFP_NOWARN, order); + pages[i] = alloc_pages(gfp, order); while (!pages[i] && order) - pages[i] = alloc_pages(gfp | __GFP_NOWARN, --order); + pages[i] = alloc_pages(gfp, --order); if (!pages[i]) goto error; @@ -1257,11 +1292,11 @@ err_mapping: return NULL; } -static void __iommu_free_atomic(struct device *dev, struct page **pages, +static void __iommu_free_atomic(struct device *dev, void *cpu_addr, dma_addr_t handle, size_t size) { __iommu_remove_mapping(dev, handle, size); - __free_from_pool(page_address(pages[0]), size); + __free_from_pool(cpu_addr, size); } static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, @@ -1344,7 +1379,7 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, } if (__in_atomic_pool(cpu_addr, size)) { - __iommu_free_atomic(dev, pages, handle, size); + __iommu_free_atomic(dev, cpu_addr, handle, size); return; } @@ -1732,6 +1767,8 @@ struct dma_map_ops iommu_ops = { .unmap_sg = arm_iommu_unmap_sg, .sync_sg_for_cpu = arm_iommu_sync_sg_for_cpu, .sync_sg_for_device = arm_iommu_sync_sg_for_device, + + .set_dma_mask = arm_dma_set_mask, }; struct dma_map_ops iommu_coherent_ops = { @@ -1745,6 +1782,8 @@ struct dma_map_ops iommu_coherent_ops = { .map_sg = arm_coherent_iommu_map_sg, .unmap_sg = arm_coherent_iommu_unmap_sg, + + .set_dma_mask = arm_dma_set_mask, }; /** @@ -1799,6 +1838,7 @@ err2: err: return ERR_PTR(err); } +EXPORT_SYMBOL_GPL(arm_iommu_create_mapping); static void release_iommu_mapping(struct kref *kref) { @@ -1815,6 +1855,7 @@ void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping) if (mapping) kref_put(&mapping->kref, release_iommu_mapping); } +EXPORT_SYMBOL_GPL(arm_iommu_release_mapping); /** * arm_iommu_attach_device @@ -1843,5 +1884,32 @@ int arm_iommu_attach_device(struct device *dev, pr_debug("Attached IOMMU controller to %s device.\n", dev_name(dev)); return 0; } +EXPORT_SYMBOL_GPL(arm_iommu_attach_device); + +/** + * arm_iommu_detach_device + * @dev: valid struct device pointer + * + * Detaches the provided device from a previously attached map. + * This voids the dma operations (dma_map_ops pointer) + */ +void arm_iommu_detach_device(struct device *dev) +{ + struct dma_iommu_mapping *mapping; + + mapping = to_dma_iommu_mapping(dev); + if (!mapping) { + dev_warn(dev, "Not attached\n"); + return; + } + + iommu_detach_device(mapping->domain, dev); + kref_put(&mapping->kref, release_iommu_mapping); + mapping = NULL; + set_dma_ops(dev, NULL); + + pr_debug("Detached IOMMU controller from %s device.\n", dev_name(dev)); +} +EXPORT_SYMBOL_GPL(arm_iommu_detach_device); #endif diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index 2dffc010cc41..5ee505c937d1 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -141,6 +141,7 @@ void setup_mm_for_reboot(void) { /* Switch to the identity mapping. */ cpu_switch_mm(idmap_pgd, &init_mm); + local_flush_bp_all(); #ifdef CONFIG_CPU_HAS_ASID /* diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 50bf1dafc9ea..6ffd78c0f9ab 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -48,7 +48,7 @@ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_MMU mmid r1, r1 @ get mm->context.id - and r3, r1, #0xff + asid r3, r1 mov r3, r3, lsl #(48 - 32) @ ASID mcrr p15, 0, r0, r3, c2 @ set TTB 0 isb diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 67c859cf16bc..ce66eb9be481 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -147,15 +147,6 @@ config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID help PPA routine service ID for setting L2 auxiliary control register. -config OMAP_32K_TIMER_HZ - int "Kernel internal timer frequency for 32KHz timer" - range 32 1024 - depends on OMAP_32K_TIMER - default "128" - help - Kernel internal timer frequency should be a divisor of 32768, - such as 64 or 128. - config OMAP_DM_TIMER bool "Use dual-mode timer" depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS diff --git a/arch/arm/plat-omap/include/plat/timex.h b/arch/arm/plat-omap/include/plat/timex.h index 6d35767bc48f..e27d2daa7790 100644 --- a/arch/arm/plat-omap/include/plat/timex.h +++ b/arch/arm/plat-omap/include/plat/timex.h @@ -28,14 +28,6 @@ #if !defined(__ASM_ARCH_OMAP_TIMEX_H) #define __ASM_ARCH_OMAP_TIMEX_H -/* - * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer, - * and that's why the CLOCK_TICK_RATE is not 32768. - */ -#ifdef CONFIG_OMAP_32K_TIMER -#define CLOCK_TICK_RATE (CONFIG_OMAP_32K_TIMER_HZ) -#else #define CLOCK_TICK_RATE (HZ * 100000UL) -#endif #endif /* __ASM_ARCH_OMAP_TIMEX_H */ diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c index febe3862873c..807ac8e5cbc0 100644 --- a/arch/arm/plat-orion/addr-map.c +++ b/arch/arm/plat-orion/addr-map.c @@ -157,9 +157,12 @@ void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i)); /* - * Chip select enabled? + * We only take care of entries for which the chip + * select is enabled, and that don't have high base + * address bits set (devices can only access the first + * 32 bits of the memory). */ - if (size & 1) { + if ((size & 1) && !(base & 0xF)) { struct mbus_dram_window *w; w = &orion_mbus_dram_info.cs[cs++]; diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 739d016eb273..8a08c31b5e20 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -10,7 +10,7 @@ choice config ARCH_SPEAR13XX bool "ST SPEAr13xx with Device Tree" - select ARCH_HAVE_CPUFREQ + select ARCH_HAS_CPUFREQ select ARM_GIC select CPU_V7 select GPIO_SPEAR_SPICS diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index dd5e56f95f3f..8d10dc8a1e17 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -22,12 +22,14 @@ .macro DBGSTR, str #ifdef DEBUG stmfd sp!, {r0-r3, ip, lr} - add r0, pc, #4 + ldr r0, =1f bl printk - b 1f - .asciz KERN_DEBUG "VFP: \str\n" - .balign 4 -1: ldmfd sp!, {r0-r3, ip, lr} + ldmfd sp!, {r0-r3, ip, lr} + + .pushsection .rodata, "a" +1: .ascii KERN_DEBUG "VFP: \str\n" + .byte 0 + .previous #endif .endm @@ -35,12 +37,14 @@ #ifdef DEBUG stmfd sp!, {r0-r3, ip, lr} mov r1, \arg - add r0, pc, #4 + ldr r0, =1f bl printk - b 1f - .asciz KERN_DEBUG "VFP: \str\n" - .balign 4 -1: ldmfd sp!, {r0-r3, ip, lr} + ldmfd sp!, {r0-r3, ip, lr} + + .pushsection .rodata, "a" +1: .ascii KERN_DEBUG "VFP: \str\n" + .byte 0 + .previous #endif .endm @@ -50,12 +54,14 @@ mov r3, \arg3 mov r2, \arg2 mov r1, \arg1 - add r0, pc, #4 + ldr r0, =1f bl printk - b 1f - .asciz KERN_DEBUG "VFP: \str\n" - .balign 4 -1: ldmfd sp!, {r0-r3, ip, lr} + ldmfd sp!, {r0-r3, ip, lr} + + .pushsection .rodata, "a" +1: .ascii KERN_DEBUG "VFP: \str\n" + .byte 0 + .previous #endif .endm diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 3b44e0dd0a93..5dfbb0b8e7f4 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -413,7 +413,7 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) * If there isn't a second FP instruction, exit now. Note that * the FPEXC.FP2V bit is valid only if FPEXC.EX is 1. */ - if (fpexc ^ (FPEXC_EX | FPEXC_FP2V)) + if ((fpexc & (FPEXC_EX | FPEXC_FP2V)) != (FPEXC_EX | FPEXC_FP2V)) goto exit; /* |
