summaryrefslogtreecommitdiffstats
path: root/arch/arm64
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64')
-rw-r--r--arch/arm64/Kconfig107
-rw-r--r--arch/arm64/Kconfig.platforms114
-rw-r--r--arch/arm64/boot/dts/apm/apm-mustang.dts10
-rw-r--r--arch/arm64/boot/dts/arm/Makefile1
-rw-r--r--arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts191
-rw-r--r--arch/arm64/boot/dts/cavium/thunder-88xx.dtsi9
-rw-r--r--arch/arm64/boot/dts/sprd/sc9836.dtsi99
-rw-r--r--arch/arm64/configs/defconfig3
-rw-r--r--arch/arm64/include/asm/acpi.h8
-rw-r--r--arch/arm64/kernel/entry.S4
-rw-r--r--arch/arm64/kernel/entry32.S2
-rw-r--r--arch/arm64/kernel/smp.c2
-rw-r--r--arch/arm64/mm/Makefile2
13 files changed, 435 insertions, 117 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 0f6edb14b7e4..430e7fa287d2 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -23,9 +23,9 @@ config ARM64
select BUILDTIME_EXTABLE_SORT
select CLONE_BACKWARDS
select COMMON_CLK
- select EDAC_SUPPORT
select CPU_PM if (SUSPEND || CPU_IDLE)
select DCACHE_WORD_ACCESS
+ select EDAC_SUPPORT
select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
@@ -160,110 +160,7 @@ source "init/Kconfig"
source "kernel/Kconfig.freezer"
-menu "Platform selection"
-
-config ARCH_EXYNOS
- bool
- help
- This enables support for Samsung Exynos SoC family
-
-config ARCH_EXYNOS7
- bool "ARMv8 based Samsung Exynos7"
- select ARCH_EXYNOS
- select COMMON_CLK_SAMSUNG
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select HAVE_S3C_RTC if RTC_CLASS
- select PINCTRL
- select PINCTRL_EXYNOS
-
- help
- This enables support for Samsung Exynos7 SoC family
-
-config ARCH_FSL_LS2085A
- bool "Freescale LS2085A SOC"
- help
- This enables support for Freescale LS2085A SOC.
-
-config ARCH_HISI
- bool "Hisilicon SoC Family"
- help
- This enables support for Hisilicon ARMv8 SoC family
-
-config ARCH_MEDIATEK
- bool "Mediatek MT65xx & MT81xx ARMv8 SoC"
- select ARM_GIC
- select PINCTRL
- help
- Support for Mediatek MT65xx & MT81xx ARMv8 SoCs
-
-config ARCH_QCOM
- bool "Qualcomm Platforms"
- select PINCTRL
- help
- This enables support for the ARMv8 based Qualcomm chipsets.
-
-config ARCH_SEATTLE
- bool "AMD Seattle SoC Family"
- help
- This enables support for AMD Seattle SOC Family
-
-config ARCH_TEGRA
- bool "NVIDIA Tegra SoC Family"
- select ARCH_HAS_RESET_CONTROLLER
- select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
- select CLKSRC_MMIO
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK
- select PINCTRL
- select RESET_CONTROLLER
- help
- This enables support for the NVIDIA Tegra SoC family.
-
-config ARCH_TEGRA_132_SOC
- bool "NVIDIA Tegra132 SoC"
- depends on ARCH_TEGRA
- select PINCTRL_TEGRA124
- select USB_ULPI if USB_PHY
- select USB_ULPI_VIEWPORT if USB_PHY
- help
- Enable support for NVIDIA Tegra132 SoC, based on the Denver
- ARMv8 CPU. The Tegra132 SoC is similar to the Tegra124 SoC,
- but contains an NVIDIA Denver CPU complex in place of
- Tegra124's "4+1" Cortex-A15 CPU complex.
-
-config ARCH_SPRD
- bool "Spreadtrum SoC platform"
- help
- Support for Spreadtrum ARM based SoCs
-
-config ARCH_THUNDER
- bool "Cavium Inc. Thunder SoC Family"
- help
- This enables support for Cavium's Thunder Family of SoCs.
-
-config ARCH_VEXPRESS
- bool "ARMv8 software model (Versatile Express)"
- select ARCH_REQUIRE_GPIOLIB
- select COMMON_CLK_VERSATILE
- select POWER_RESET_VEXPRESS
- select VEXPRESS_CONFIG
- help
- This enables support for the ARMv8 software model (Versatile
- Express).
-
-config ARCH_XGENE
- bool "AppliedMicro X-Gene SOC Family"
- help
- This enables support for AppliedMicro X-Gene SOC Family
-
-config ARCH_ZYNQMP
- bool "Xilinx ZynqMP Family"
- help
- This enables support for Xilinx ZynqMP Family
-
-endmenu
+source "Kconfig.platforms"
menu "Bus support"
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
new file mode 100644
index 000000000000..f7e43271026e
--- /dev/null
+++ b/arch/arm64/Kconfig.platforms
@@ -0,0 +1,114 @@
+menu "Platform selection"
+
+config ARCH_EXYNOS
+ bool
+ help
+ This enables support for Samsung Exynos SoC family
+
+config ARCH_EXYNOS7
+ bool "ARMv8 based Samsung Exynos7"
+ select ARCH_EXYNOS
+ select COMMON_CLK_SAMSUNG
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
+ select PINCTRL
+ select PINCTRL_EXYNOS
+
+ help
+ This enables support for Samsung Exynos7 SoC family
+
+config ARCH_FSL_LS2085A
+ bool "Freescale LS2085A SOC"
+ help
+ This enables support for Freescale LS2085A SOC.
+
+config ARCH_HISI
+ bool "Hisilicon SoC Family"
+ help
+ This enables support for Hisilicon ARMv8 SoC family
+
+config ARCH_MEDIATEK
+ bool "Mediatek MT65xx & MT81xx ARMv8 SoC"
+ select ARM_GIC
+ select PINCTRL
+ help
+ Support for Mediatek MT65xx & MT81xx ARMv8 SoCs
+
+config ARCH_QCOM
+ bool "Qualcomm Platforms"
+ select PINCTRL
+ help
+ This enables support for the ARMv8 based Qualcomm chipsets.
+
+config ARCH_ROCKCHIP
+ bool "Rockchip Platforms"
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARCH_REQUIRE_GPIOLIB
+ select PINCTRL
+ select PINCTRL_ROCKCHIP
+ help
+ This enables support for the ARMv8 based Rockchip chipsets,
+ like the RK3368.
+
+config ARCH_SEATTLE
+ bool "AMD Seattle SoC Family"
+ help
+ This enables support for AMD Seattle SOC Family
+
+config ARCH_TEGRA
+ bool "NVIDIA Tegra SoC Family"
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARCH_REQUIRE_GPIOLIB
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select CLKSRC_OF
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ select PINCTRL
+ select RESET_CONTROLLER
+ help
+ This enables support for the NVIDIA Tegra SoC family.
+
+config ARCH_TEGRA_132_SOC
+ bool "NVIDIA Tegra132 SoC"
+ depends on ARCH_TEGRA
+ select PINCTRL_TEGRA124
+ select USB_ULPI if USB_PHY
+ select USB_ULPI_VIEWPORT if USB_PHY
+ help
+ Enable support for NVIDIA Tegra132 SoC, based on the Denver
+ ARMv8 CPU. The Tegra132 SoC is similar to the Tegra124 SoC,
+ but contains an NVIDIA Denver CPU complex in place of
+ Tegra124's "4+1" Cortex-A15 CPU complex.
+
+config ARCH_SPRD
+ bool "Spreadtrum SoC platform"
+ help
+ Support for Spreadtrum ARM based SoCs
+
+config ARCH_THUNDER
+ bool "Cavium Inc. Thunder SoC Family"
+ help
+ This enables support for Cavium's Thunder Family of SoCs.
+
+config ARCH_VEXPRESS
+ bool "ARMv8 software model (Versatile Express)"
+ select ARCH_REQUIRE_GPIOLIB
+ select COMMON_CLK_VERSATILE
+ select POWER_RESET_VEXPRESS
+ select VEXPRESS_CONFIG
+ help
+ This enables support for the ARMv8 software model (Versatile
+ Express).
+
+config ARCH_XGENE
+ bool "AppliedMicro X-Gene SOC Family"
+ help
+ This enables support for AppliedMicro X-Gene SOC Family
+
+config ARCH_ZYNQMP
+ bool "Xilinx ZynqMP Family"
+ help
+ This enables support for Xilinx ZynqMP Family
+
+endmenu
diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
index 83578e766b94..4c55833d8a41 100644
--- a/arch/arm64/boot/dts/apm/apm-mustang.dts
+++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
@@ -23,6 +23,16 @@
device_type = "memory";
reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ button@1 {
+ label = "POWER";
+ linux,code = <116>;
+ linux,input-type = <0x1>;
+ interrupts = <0x0 0x2d 0x1>;
+ };
+ };
};
&pcie0clk {
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index c5c98b91514e..bb3c07209676 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -1,6 +1,7 @@
dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
new file mode 100644
index 000000000000..5b1d0181023b
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -0,0 +1,191 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * LogicTile Express 20MG
+ * V2F-1XV7
+ *
+ * Cortex-A53 (2 cores) Soft Macrocell Model
+ *
+ * HBI-0247C
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "V2F-1XV7 Cortex-A53x2 SMM";
+ arm,hbi = <0x247>;
+ arm,vexpress,site = <0xf>;
+ compatible = "arm,vexpress,v2f-1xv7,ca53x2", "arm,vexpress,v2f-1xv7", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen {
+ stdout-path = "serial0:38400n8";
+ };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ i2c0 = &v2m_i2c_dvi;
+ i2c1 = &v2m_i2c_pcie;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0 0>;
+ next-level-cache = <&L2_0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0 1>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x80000000>; /* 2GB @ 2GB */
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0x2c001000 0 0x1000>,
+ <0 0x2c002000 0 0x2000>,
+ <0 0x2c004000 0 0x2000>,
+ <0 0x2c006000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ dcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ smbclk: osc@4 {
+ /* SMC clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 4>;
+ freq-range = <40000000 40000000>;
+ #clock-cells = <0>;
+ clock-output-names = "smclk";
+ };
+
+ volt@0 {
+ /* VIO to expansion board above */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO_UP";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ volt@1 {
+ /* 12V from power connector J6 */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 1>;
+ regulator-name = "12";
+ regulator-always-on;
+ };
+
+ temp@0 {
+ /* FPGA temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "FPGA";
+ };
+ };
+
+ smb {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+ /include/ "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi"
+ };
+};
diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
index d8c0bdc51882..9cb7cf94284a 100644
--- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
@@ -376,10 +376,19 @@
gic0: interrupt-controller@8010,00000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
interrupt-controller;
reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
<0x8010 0x80000000 0x0 0x600000>; /* GICR */
interrupts = <1 9 0xf04>;
+
+ its: gic-its@8010,00020000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x8010 0x20000 0x0 0x200000>;
+ };
};
uaa0: serial@87e0,24000000 {
diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi
index ee34e1a36e03..63894c456969 100644
--- a/arch/arm64/boot/dts/sprd/sc9836.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi
@@ -16,28 +16,28 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
};
- cpu@2 {
+ cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
};
- cpu@3 {
+ cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x3>;
@@ -75,14 +75,103 @@
};
};
- /* funnel input port 0~3 is reserved for ETMs */
+ /* funnel input port 0-4 */
port@1 {
+ reg = <0>;
+ funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+
+ port@3 {
+ reg = <2>;
+ funnel_in_port2: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+
+ port@4 {
+ reg = <3>;
+ funnel_in_port3: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+
+ port@5 {
reg = <4>;
funnel_in_port4: endpoint {
slave-mode;
remote-endpoint = <&stm_out>;
};
};
+ /* Other input ports aren't connected to anyone */
+ };
+ };
+
+ etm@10440000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x10440000 0 0x1000>;
+
+ cpu = <&cpu0>;
+ clocks = <&clk26mhz>;
+ clock-names = "apb_pclk";
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
+ };
+ };
+
+ etm@10540000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x10540000 0 0x1000>;
+
+ cpu = <&cpu1>;
+ clocks = <&clk26mhz>;
+ clock-names = "apb_pclk";
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
+ };
+ };
+
+ etm@10640000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x10640000 0 0x1000>;
+
+ cpu = <&cpu2>;
+ clocks = <&clk26mhz>;
+ clock-names = "apb_pclk";
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in_port2>;
+ };
+ };
+ };
+
+ etm@10740000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x10740000 0 0x1000>;
+
+ cpu = <&cpu3>;
+ clocks = <&clk26mhz>;
+ clock-names = "apb_pclk";
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in_port3>;
+ };
};
};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index f38c94f1d898..506b466cbbfd 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -35,6 +35,7 @@ CONFIG_ARCH_EXYNOS7=y
CONFIG_ARCH_FSL_LS2085A=y
CONFIG_ARCH_HISI=y
CONFIG_ARCH_MEDIATEK=y
+CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SEATTLE=y
CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_TEGRA_132_SOC=y
@@ -83,6 +84,7 @@ CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_CEVA=y
CONFIG_AHCI_XGENE=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
@@ -101,6 +103,7 @@ CONFIG_SERIO_AMBAKMI=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
index 39248d3adf5d..406485ed110a 100644
--- a/arch/arm64/include/asm/acpi.h
+++ b/arch/arm64/include/asm/acpi.h
@@ -19,6 +19,14 @@
#include <asm/psci.h>
#include <asm/smp_plat.h>
+/* Macros for consistency checks of the GICC subtable of MADT */
+#define ACPI_MADT_GICC_LENGTH \
+ (acpi_gbl_FADT.header.revision < 6 ? 76 : 80)
+
+#define BAD_MADT_GICC_ENTRY(entry, end) \
+ (!(entry) || (unsigned long)(entry) + sizeof(*(entry)) > (end) || \
+ (entry)->header.length != ACPI_MADT_GICC_LENGTH)
+
/* Basic configuration for ACPI */
#ifdef CONFIG_ACPI
/* ACPI table mapping after acpi_gbl_permanent_mmap is set */
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index a7691a378668..f860bfda454a 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -352,8 +352,8 @@ el1_inv:
// TODO: add support for undefined instructions in kernel mode
enable_dbg
mov x0, sp
+ mov x2, x1
mov x1, #BAD_SYNC
- mrs x2, esr_el1
b bad_mode
ENDPROC(el1_sync)
@@ -553,7 +553,7 @@ el0_inv:
ct_user_exit
mov x0, sp
mov x1, #BAD_SYNC
- mrs x2, esr_el1
+ mov x2, x25
bl bad_mode
b ret_to_user
ENDPROC(el0_sync)
diff --git a/arch/arm64/kernel/entry32.S b/arch/arm64/kernel/entry32.S
index bd9bfaa9269b..f332d5d1f6b4 100644
--- a/arch/arm64/kernel/entry32.S
+++ b/arch/arm64/kernel/entry32.S
@@ -32,13 +32,11 @@
ENTRY(compat_sys_sigreturn_wrapper)
mov x0, sp
- mov x27, #0 // prevent syscall restart handling (why)
b compat_sys_sigreturn
ENDPROC(compat_sys_sigreturn_wrapper)
ENTRY(compat_sys_rt_sigreturn_wrapper)
mov x0, sp
- mov x27, #0 // prevent syscall restart handling (why)
b compat_sys_rt_sigreturn
ENDPROC(compat_sys_rt_sigreturn_wrapper)
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 695801a54ca5..50fb4696654e 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -438,7 +438,7 @@ acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header,
struct acpi_madt_generic_interrupt *processor;
processor = (struct acpi_madt_generic_interrupt *)header;
- if (BAD_MADT_ENTRY(processor, end))
+ if (BAD_MADT_GICC_ENTRY(processor, end))
return -EINVAL;
acpi_table_print_madt_entry(header);
diff --git a/arch/arm64/mm/Makefile b/arch/arm64/mm/Makefile
index 9d84feb41a16..773d37a14039 100644
--- a/arch/arm64/mm/Makefile
+++ b/arch/arm64/mm/Makefile
@@ -4,5 +4,3 @@ obj-y := dma-mapping.o extable.o fault.o init.o \
context.o proc.o pageattr.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_ARM64_PTDUMP) += dump.o
-
-CFLAGS_mmu.o := -I$(srctree)/scripts/dtc/libfdt/
OpenPOWER on IntegriCloud