summaryrefslogtreecommitdiffstats
path: root/arch/arm64/kernel/probes
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/kernel/probes')
-rw-r--r--arch/arm64/kernel/probes/decode-insn.c48
-rw-r--r--arch/arm64/kernel/probes/kprobes.c67
2 files changed, 43 insertions, 72 deletions
diff --git a/arch/arm64/kernel/probes/decode-insn.c b/arch/arm64/kernel/probes/decode-insn.c
index 37e47a9d617e..d1731bf977ef 100644
--- a/arch/arm64/kernel/probes/decode-insn.c
+++ b/arch/arm64/kernel/probes/decode-insn.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/kprobes.h>
#include <linux/module.h>
+#include <linux/kallsyms.h>
#include <asm/kprobes.h>
#include <asm/insn.h>
#include <asm/sections.h>
@@ -122,7 +123,7 @@ arm_probe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
static bool __kprobes
is_probed_address_atomic(kprobe_opcode_t *scan_start, kprobe_opcode_t *scan_end)
{
- while (scan_start > scan_end) {
+ while (scan_start >= scan_end) {
/*
* atomic region starts from exclusive load and ends with
* exclusive store.
@@ -142,33 +143,30 @@ arm_kprobe_decode_insn(kprobe_opcode_t *addr, struct arch_specific_insn *asi)
{
enum kprobe_insn decoded;
kprobe_opcode_t insn = le32_to_cpu(*addr);
- kprobe_opcode_t *scan_start = addr - 1;
- kprobe_opcode_t *scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;
-#if defined(CONFIG_MODULES) && defined(MODULES_VADDR)
- struct module *mod;
-#endif
-
- if (addr >= (kprobe_opcode_t *)_text &&
- scan_end < (kprobe_opcode_t *)_text)
- scan_end = (kprobe_opcode_t *)_text;
-#if defined(CONFIG_MODULES) && defined(MODULES_VADDR)
- else {
- preempt_disable();
- mod = __module_address((unsigned long)addr);
- if (mod && within_module_init((unsigned long)addr, mod) &&
- !within_module_init((unsigned long)scan_end, mod))
- scan_end = (kprobe_opcode_t *)mod->init_layout.base;
- else if (mod && within_module_core((unsigned long)addr, mod) &&
- !within_module_core((unsigned long)scan_end, mod))
- scan_end = (kprobe_opcode_t *)mod->core_layout.base;
- preempt_enable();
+ kprobe_opcode_t *scan_end = NULL;
+ unsigned long size = 0, offset = 0;
+
+ /*
+ * If there's a symbol defined in front of and near enough to
+ * the probe address assume it is the entry point to this
+ * code and use it to further limit how far back we search
+ * when determining if we're in an atomic sequence. If we could
+ * not find any symbol skip the atomic test altogether as we
+ * could otherwise end up searching irrelevant text/literals.
+ * KPROBES depends on KALLSYMS so this last case should never
+ * happen.
+ */
+ if (kallsyms_lookup_size_offset((unsigned long) addr, &size, &offset)) {
+ if (offset < (MAX_ATOMIC_CONTEXT_SIZE*sizeof(kprobe_opcode_t)))
+ scan_end = addr - (offset / sizeof(kprobe_opcode_t));
+ else
+ scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;
}
-#endif
decoded = arm_probe_decode_insn(insn, asi);
- if (decoded == INSN_REJECTED ||
- is_probed_address_atomic(scan_start, scan_end))
- return INSN_REJECTED;
+ if (decoded != INSN_REJECTED && scan_end)
+ if (is_probed_address_atomic(addr - 1, scan_end))
+ return INSN_REJECTED;
return decoded;
}
diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index bf9768588288..f5077ea7af6d 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -19,7 +19,7 @@
#include <linux/kasan.h>
#include <linux/kernel.h>
#include <linux/kprobes.h>
-#include <linux/module.h>
+#include <linux/extable.h>
#include <linux/slab.h>
#include <linux/stop_machine.h>
#include <linux/stringify.h>
@@ -31,7 +31,7 @@
#include <asm/insn.h>
#include <asm/uaccess.h>
#include <asm/irq.h>
-#include <asm-generic/sections.h>
+#include <asm/sections.h>
#include "decode-insn.h"
@@ -41,18 +41,6 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
static void __kprobes
post_kprobe_handler(struct kprobe_ctlblk *, struct pt_regs *);
-static inline unsigned long min_stack_size(unsigned long addr)
-{
- unsigned long size;
-
- if (on_irq_stack(addr, raw_smp_processor_id()))
- size = IRQ_STACK_PTR(raw_smp_processor_id()) - addr;
- else
- size = (unsigned long)current_thread_info() + THREAD_START_SP - addr;
-
- return min(size, FIELD_SIZEOF(struct kprobe_ctlblk, jprobes_stack));
-}
-
static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
{
/* prepare insn slot */
@@ -178,13 +166,18 @@ static void __kprobes set_current_kprobe(struct kprobe *p)
}
/*
- * The D-flag (Debug mask) is set (masked) upon debug exception entry.
- * Kprobes needs to clear (unmask) D-flag -ONLY- in case of recursive
- * probe i.e. when probe hit from kprobe handler context upon
- * executing the pre/post handlers. In this case we return with
- * D-flag clear so that single-stepping can be carried-out.
- *
- * Leave D-flag set in all other cases.
+ * When PSTATE.D is set (masked), then software step exceptions can not be
+ * generated.
+ * SPSR's D bit shows the value of PSTATE.D immediately before the
+ * exception was taken. PSTATE.D is set while entering into any exception
+ * mode, however software clears it for any normal (none-debug-exception)
+ * mode in the exception entry. Therefore, when we are entering into kprobe
+ * breakpoint handler from any normal mode then SPSR.D bit is already
+ * cleared, however it is set when we are entering from any debug exception
+ * mode.
+ * Since we always need to generate single step exception after a kprobe
+ * breakpoint exception therefore we need to clear it unconditionally, when
+ * we become sure that the current breakpoint exception is for kprobe.
*/
static void __kprobes
spsr_set_debug_flag(struct pt_regs *regs, int mask)
@@ -257,10 +250,7 @@ static void __kprobes setup_singlestep(struct kprobe *p,
set_ss_context(kcb, slot); /* mark pending ss */
- if (kcb->kprobe_status == KPROBE_REENTER)
- spsr_set_debug_flag(regs, 0);
- else
- WARN_ON(regs->pstate & PSR_D_BIT);
+ spsr_set_debug_flag(regs, 0);
/* IRQs and single stepping do not mix well. */
kprobes_save_local_irqflag(kcb, regs);
@@ -345,8 +335,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
BUG();
kernel_disable_single_step();
- if (kcb->kprobe_status == KPROBE_REENTER)
- spsr_set_debug_flag(regs, 1);
if (kcb->kprobe_status == KPROBE_REENTER)
restore_previous_kprobe(kcb);
@@ -469,9 +457,6 @@ kprobe_single_step_handler(struct pt_regs *regs, unsigned int esr)
kprobes_restore_local_irqflag(kcb, regs);
kernel_disable_single_step();
- if (kcb->kprobe_status == KPROBE_REENTER)
- spsr_set_debug_flag(regs, 1);
-
post_kprobe_handler(kcb, regs);
}
@@ -489,20 +474,15 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
{
struct jprobe *jp = container_of(p, struct jprobe, kp);
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- long stack_ptr = kernel_stack_pointer(regs);
kcb->jprobe_saved_regs = *regs;
/*
- * As Linus pointed out, gcc assumes that the callee
- * owns the argument space and could overwrite it, e.g.
- * tailcall optimization. So, to be absolutely safe
- * we also save and restore enough stack bytes to cover
- * the argument area.
+ * Since we can't be sure where in the stack frame "stacked"
+ * pass-by-value arguments are stored we just don't try to
+ * duplicate any of the stack. Do not use jprobes on functions that
+ * use more than 64 bytes (after padding each to an 8 byte boundary)
+ * of arguments, or pass individual arguments larger than 16 bytes.
*/
- kasan_disable_current();
- memcpy(kcb->jprobes_stack, (void *)stack_ptr,
- min_stack_size(stack_ptr));
- kasan_enable_current();
instruction_pointer_set(regs, (unsigned long) jp->entry);
preempt_disable();
@@ -554,19 +534,12 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
}
unpause_graph_tracing();
*regs = kcb->jprobe_saved_regs;
- kasan_disable_current();
- memcpy((void *)stack_addr, kcb->jprobes_stack,
- min_stack_size(stack_addr));
- kasan_enable_current();
preempt_enable_no_resched();
return 1;
}
bool arch_within_kprobe_blacklist(unsigned long addr)
{
- extern char __idmap_text_start[], __idmap_text_end[];
- extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[];
-
if ((addr >= (unsigned long)__kprobes_text_start &&
addr < (unsigned long)__kprobes_text_end) ||
(addr >= (unsigned long)__entry_text_start &&
OpenPOWER on IntegriCloud