summaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/broadcom
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/broadcom')
-rw-r--r--arch/arm64/boot/dts/broadcom/Makefile2
-rw-r--r--arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts8
-rw-r--r--arch/arm64/boot/dts/broadcom/bcm2837.dtsi8
l---------arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi1
-rw-r--r--arch/arm64/boot/dts/broadcom/ns2-svk.dts47
-rw-r--r--arch/arm64/boot/dts/broadcom/ns2-xmc.dts191
-rw-r--r--arch/arm64/boot/dts/broadcom/ns2.dtsi208
7 files changed, 431 insertions, 34 deletions
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 05faf2a8a35c..f1caece9d3a7 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,5 +1,5 @@
dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
-dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
+dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb
dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index 7841b724e340..c309633a1e87 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -2,6 +2,7 @@
#include "bcm2837.dtsi"
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
/ {
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
@@ -15,13 +16,6 @@
act {
gpios = <&gpio 47 0>;
};
-
- pwr {
- label = "PWR";
- gpios = <&gpio 35 0>;
- default-state = "keep";
- linux,default-trigger = "default-on";
- };
};
};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi b/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
index 8216bbb29fe0..19f2fe620a21 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
@@ -1,7 +1,7 @@
#include "bcm283x.dtsi"
/ {
- compatible = "brcm,bcm2836";
+ compatible = "brcm,bcm2837";
soc {
ranges = <0x7e000000 0x3f000000 0x1000000>,
@@ -74,3 +74,9 @@
interrupt-parent = <&local_intc>;
interrupts = <8>;
};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+ compatible = "brcm,bcm2837-thermal";
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
new file mode 120000
index 000000000000..cbeebe312ff8
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/bcm283x-rpi-usb-host.dtsi \ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index b09f3bc5c6c1..5ae08161649e 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -56,6 +56,10 @@
};
};
+&enet {
+ status = "ok";
+};
+
&pci_phy0 {
status = "ok";
};
@@ -72,6 +76,10 @@
status = "ok";
};
+&pcie8 {
+ status = "ok";
+};
+
&i2c0 {
status = "ok";
};
@@ -157,6 +165,10 @@
status = "ok";
};
+&sdio1 {
+ status = "ok";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@@ -174,6 +186,7 @@
&mdio_mux_iproc {
mdio@10 {
gphy0: eth-phy@10 {
+ enet-phy-lane-swap;
reg = <0x10>;
};
};
@@ -187,3 +200,37 @@
groups = "nand_grp";
};
};
+
+&qspi {
+ bspi-sel = <0>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <12500000>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000a0000>;
+ };
+
+ partition@a0000 {
+ label = "env";
+ reg = <0x000a0000 0x00060000>;
+ };
+
+ partition@100000 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x00700000 0x01900000>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/ns2-xmc.dts
new file mode 100644
index 000000000000..99a2723cccd2
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/ns2-xmc.dts
@@ -0,0 +1,191 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "ns2.dtsi"
+
+/ {
+ model = "Broadcom NS2 XMC";
+ compatible = "brcm,ns2-xmc", "brcm,ns2";
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs = "earlycon=uart8250,mmio32,0x66130000";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x000000000 0x80000000 0x00000001 0x00000000>;
+ };
+};
+
+&enet {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "ok";
+};
+
+&i2c1 {
+ status = "ok";
+};
+
+&mdio_mux_iproc {
+ mdio@10 {
+ gphy0: eth-phy@10 {
+ reg = <0x10>;
+ };
+ };
+};
+
+&nand {
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <16>;
+ brcm,nand-oob-sector-size = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "nboot";
+ reg = <0x00000000 0x00280000>; /* 2.5MB */
+ read-only;
+ };
+
+ partition@280000 {
+ label = "nenv";
+ reg = <0x00280000 0x00040000>; /* 0.25MB */
+ read-only;
+ };
+
+ partition@2c0000 {
+ label = "ndtb";
+ reg = <0x002c0000 0x00040000>; /* 0.25MB */
+ read-only;
+ };
+
+ partition@300000 {
+ label = "nsystem";
+ reg = <0x00300000 0x03d00000>; /* 61MB */
+ read-only;
+ };
+
+ partition@4000000 {
+ label = "nrootfs";
+ reg = <0x04000000 0x06400000>; /* 100MB */
+ };
+
+ partition@0a400000{
+ label = "ncustfs";
+ reg = <0x0a400000 0x35c00000>; /* 860MB */
+ };
+ };
+};
+
+&pci_phy0 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&pcie8 {
+ status = "ok";
+};
+
+&sata_phy0 {
+ status = "ok";
+};
+
+&sata_phy1 {
+ status = "ok";
+};
+
+&sata {
+ status = "ok";
+};
+
+&qspi {
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ spi-max-frequency = <62500000>;
+ m25p,default-addr-width = <3>;
+ reg = <0x0 0x0>;
+
+ partition@0 {
+ label = "bl0";
+ reg = <0x00000000 0x00080000>; /* 512KB */
+ };
+
+ partition@80000 {
+ label = "fip";
+ reg = <0x00080000 0x00150000>; /* 1344KB */
+ };
+
+ partition@1e0000 {
+ label = "env";
+ reg = <0x001e0000 0x00010000>;/* 64KB */
+ };
+
+ partition@1f0000 {
+ label = "dtb";
+ reg = <0x001f0000 0x00010000>; /* 64KB */
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x00200000 0x00e00000>; /* 14MB */
+ };
+
+ partition@1000000 {
+ label = "rootfs";
+ reg = <0x01000000 0x01000000>; /* 16MB */
+ };
+ };
+};
+
+&uart3 {
+ status = "ok";
+};
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index d95dc408629a..bcb03fc32665 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -30,6 +30,8 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+/memreserve/ 0x81000000 0x00200000;
+
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/bcm-ns2.h>
@@ -112,10 +114,11 @@
pcie0: pcie@20020000 {
compatible = "brcm,iproc-pcie";
reg = <0 0x20020000 0 0x1000>;
+ dma-coherent;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 281 IRQ_TYPE_NONE>;
+ interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_NONE>;
linux,pci-domain = <0>;
@@ -133,27 +136,20 @@
status = "disabled";
- msi-parent = <&msi0>;
- msi0: msi@20020000 {
- compatible = "brcm,iproc-msi";
- msi-controller;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 277 IRQ_TYPE_NONE>,
- <GIC_SPI 278 IRQ_TYPE_NONE>,
- <GIC_SPI 279 IRQ_TYPE_NONE>,
- <GIC_SPI 280 IRQ_TYPE_NONE>;
- brcm,num-eq-region = <1>;
- brcm,num-msi-msg-region = <1>;
- };
+ phys = <&pci_phy0>;
+ phy-names = "pcie-phy";
+
+ msi-parent = <&v2m0>;
};
pcie4: pcie@50020000 {
compatible = "brcm,iproc-pcie";
reg = <0 0x50020000 0 0x1000>;
+ dma-coherent;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 305 IRQ_TYPE_NONE>;
+ interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_NONE>;
linux,pci-domain = <4>;
@@ -171,16 +167,28 @@
status = "disabled";
- msi-parent = <&msi4>;
- msi4: msi@50020000 {
- compatible = "brcm,iproc-msi";
- msi-controller;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 301 IRQ_TYPE_NONE>,
- <GIC_SPI 302 IRQ_TYPE_NONE>,
- <GIC_SPI 303 IRQ_TYPE_NONE>,
- <GIC_SPI 304 IRQ_TYPE_NONE>;
- };
+ phys = <&pci_phy1>;
+ phy-names = "pcie-phy";
+
+ msi-parent = <&v2m0>;
+ };
+
+ pcie8: pcie@60c00000 {
+ compatible = "brcm,iproc-pcie-paxc";
+ reg = <0 0x60c00000 0 0x1000>;
+ dma-coherent;
+ linux,pci-domain = <8>;
+
+ bus-range = <0x0 0x1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x83000000 0 0x00000000 0 0x60000000 0 0x00c00000>;
+
+ status = "disabled";
+
+ msi-parent = <&v2m0>;
};
soc: soc {
@@ -191,6 +199,59 @@
#include "ns2-clock.dtsi"
+ enet: ethernet@61000000 {
+ compatible = "brcm,ns2-amac";
+ reg = <0x61000000 0x1000>,
+ <0x61090000 0x1000>,
+ <0x61030000 0x100>;
+ reg-names = "amac_base", "idm_base", "nicpm_base";
+ interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+ phy-handle = <&gphy0>;
+ phy-mode = "rgmii";
+ status = "disabled";
+ };
+
+ pdc0: iproc-pdc0@612c0000 {
+ compatible = "brcm,iproc-pdc-mbox";
+ reg = <0x612c0000 0x445>; /* PDC FS0 regs */
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ dma-coherent;
+ brcm,rx-status-len = <32>;
+ brcm,use-bcm-hdr;
+ };
+
+ pdc1: iproc-pdc1@612e0000 {
+ compatible = "brcm,iproc-pdc-mbox";
+ reg = <0x612e0000 0x445>; /* PDC FS1 regs */
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ dma-coherent;
+ brcm,rx-status-len = <32>;
+ brcm,use-bcm-hdr;
+ };
+
+ pdc2: iproc-pdc2@61300000 {
+ compatible = "brcm,iproc-pdc-mbox";
+ reg = <0x61300000 0x445>; /* PDC FS2 regs */
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ dma-coherent;
+ brcm,rx-status-len = <32>;
+ brcm,use-bcm-hdr;
+ };
+
+ pdc3: iproc-pdc3@61320000 {
+ compatible = "brcm,iproc-pdc-mbox";
+ reg = <0x61320000 0x445>; /* PDC FS3 regs */
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ dma-coherent;
+ brcm,rx-status-len = <32>;
+ brcm,use-bcm-hdr;
+ };
+
dma0: dma@61360000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x61360000 0x1000>;
@@ -248,7 +309,7 @@
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
- mmu-masters;
+ #iommu-cells = <1>;
};
pinctrl: pinctrl@6501d130 {
@@ -277,6 +338,82 @@
<0x65260000 0x1000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
IRQ_TYPE_LEVEL_HIGH)>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x652e0000 0x80000>;
+
+ v2m0: v2m@00000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x00000 0x1000>;
+ arm,msi-base-spi = <72>;
+ arm,msi-num-spis = <16>;
+ };
+
+ v2m1: v2m@10000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x10000 0x1000>;
+ arm,msi-base-spi = <88>;
+ arm,msi-num-spis = <16>;
+ };
+
+ v2m2: v2m@20000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x20000 0x1000>;
+ arm,msi-base-spi = <104>;
+ arm,msi-num-spis = <16>;
+ };
+
+ v2m3: v2m@30000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x30000 0x1000>;
+ arm,msi-base-spi = <120>;
+ arm,msi-num-spis = <16>;
+ };
+
+ v2m4: v2m@40000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x40000 0x1000>;
+ arm,msi-base-spi = <136>;
+ arm,msi-num-spis = <16>;
+ };
+
+ v2m5: v2m@50000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x50000 0x1000>;
+ arm,msi-base-spi = <152>;
+ arm,msi-num-spis = <16>;
+ };
+
+ v2m6: v2m@60000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x60000 0x1000>;
+ arm,msi-base-spi = <168>;
+ arm,msi-num-spis = <16>;
+ };
+
+ v2m7: v2m@70000 {
+ compatible = "arm,gic-v2m-frame";
+ interrupt-parent = <&gic>;
+ msi-controller;
+ reg = <0x70000 0x1000>;
+ arm,msi-base-spi = <184>;
+ arm,msi-num-spis = <16>;
+ };
};
cci@65590000 {
@@ -515,6 +652,7 @@
sata: ahci@663f2000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x663f2000 0x1000>;
+ dma-coherent;
reg-names = "ahci";
interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -538,6 +676,7 @@
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x66420000 0x100>;
interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
bus-width = <8>;
clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
status = "disabled";
@@ -547,6 +686,7 @@
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x66430000 0x100>;
interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
bus-width = <8>;
clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
status = "disabled";
@@ -565,5 +705,23 @@
brcm,nand-has-wp;
};
+
+ qspi: spi@66470200 {
+ compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
+ reg = <0x66470200 0x184>,
+ <0x66470000 0x124>,
+ <0x67017408 0x004>,
+ <0x664703a0 0x01c>;
+ reg-names = "mspi", "bspi", "intr_regs",
+ "intr_status_reg";
+ interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "spi_l1_intr";
+ clocks = <&iprocmed>;
+ clock-names = "iprocmed";
+ num-cs = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
};
};
OpenPOWER on IntegriCloud